A method for identifying EMI critical circuits during development of a large C3

NASA Astrophysics Data System (ADS)

Barr, Douglas H.

The circuit analysis methods and process Boeing Aerospace used on a large, ground-based military command, control, and communications (C3) system are described. This analysis was designed to help identify electromagnetic interference (EMI) critical circuits. The methodology used the MIL-E-6051 equipment criticality categories as the basis for defining critical circuits, relational database technology to help sort through and account for all of the approximately 5000 system signal cables, and Macintosh Plus personal computers to predict critical circuits based on safety margin analysis. The EMI circuit analysis process systematically examined all system circuits to identify which ones were likely to be EMI critical. The process used two separate, sequential safety margin analyses to identify critical circuits (conservative safety margin analysis, and detailed safety margin analysis). These analyses used field-to-wire and wire-to-wire coupling models using both worst-case and detailed circuit parameters (physical and electrical) to predict circuit safety margins. This process identified the predicted critical circuits that could then be verified by test.

Thermal-safety margins and the necessity of thermoregulatory behavior across latitude and elevation

PubMed Central

Sunday, Jennifer M.; Bates, Amanda E.; Kearney, Michael R.; Colwell, Robert K.; Dulvy, Nicholas K.; Longino, John T.; Huey, Raymond B.

2014-01-01

Physiological thermal-tolerance limits of terrestrial ectotherms often exceed local air temperatures, implying a high degree of thermal safety (an excess of warm or cold thermal tolerance). However, air temperatures can be very different from the equilibrium body temperature of an individual ectotherm. Here, we compile thermal-tolerance limits of ectotherms across a wide range of latitudes and elevations and compare these thermal limits both to air and to operative body temperatures (theoretically equilibrated body temperatures) of small ectothermic animals during the warmest and coldest times of the year. We show that extreme operative body temperatures in exposed habitats match or exceed the physiological thermal limits of most ectotherms. Therefore, contrary to previous findings using air temperatures, most ectotherms do not have a physiological thermal-safety margin. They must therefore rely on behavior to avoid overheating during the warmest times, especially in the lowland tropics. Likewise, species living at temperate latitudes and in alpine habitats must retreat to avoid lethal cold exposure. Behavioral plasticity of habitat use and the energetic consequences of thermal retreats are therefore critical aspects of species’ vulnerability to climate warming and extreme events. PMID:24616528

Thermal-safety margins and the necessity of thermoregulatory behavior across latitude and elevation.

PubMed

Sunday, Jennifer M; Bates, Amanda E; Kearney, Michael R; Colwell, Robert K; Dulvy, Nicholas K; Longino, John T; Huey, Raymond B

2014-04-15

Physiological thermal-tolerance limits of terrestrial ectotherms often exceed local air temperatures, implying a high degree of thermal safety (an excess of warm or cold thermal tolerance). However, air temperatures can be very different from the equilibrium body temperature of an individual ectotherm. Here, we compile thermal-tolerance limits of ectotherms across a wide range of latitudes and elevations and compare these thermal limits both to air and to operative body temperatures (theoretically equilibrated body temperatures) of small ectothermic animals during the warmest and coldest times of the year. We show that extreme operative body temperatures in exposed habitats match or exceed the physiological thermal limits of most ectotherms. Therefore, contrary to previous findings using air temperatures, most ectotherms do not have a physiological thermal-safety margin. They must therefore rely on behavior to avoid overheating during the warmest times, especially in the lowland tropics. Likewise, species living at temperate latitudes and in alpine habitats must retreat to avoid lethal cold exposure. Behavioral plasticity of habitat use and the energetic consequences of thermal retreats are therefore critical aspects of species' vulnerability to climate warming and extreme events.

Safety margins in the implementation of planetary quarantine requirements

NASA Technical Reports Server (NTRS)

Schalkowsky, S.; Jacoby, I.

1972-01-01

The formulation of planetary quarantine requirements, and their implementation as determined by a risk allocation model, is discussed. The model defines control safety margins with particular emphasis on utility in achieving the desired minimization of excessive margins, and their effect on implementation procedures.

Texas curve margin of safety.

DOT National Transportation Integrated Search

2013-01-01

This software can be used to assist with the assessment of margin of safety for a horizontal curve. It is intended for use by engineers and technicians responsible for safety analysis or management of rural highway pavement or traffic control devices...

A review of inherent safety characteristics of metal alloy sodium-cooled fast reactor fuel against postulated accidents

DOE PAGES

Sofu, Tanju

2015-04-01

The thermal, mechanical, and neutronic performance of the metal alloy fast reactor fuel design complements the safety advantages of the liquid metal cooling and the pool-type primary system. Together, these features provide large safety margins in both normal operating modes and for a wide range of postulated accidents. In particular, they maximize the measures of safety associated with inherent reactor response to unprotected, double-fault accidents, and to minimize risk to the public and plant investment. High thermal conductivity and high gap conductance play the most significant role in safety advantages of the metallic fuel, resulting in a flatter radial temperaturemore » profile within the pin and much lower normal operation and transient temperatures in comparison to oxide fuel. Despite the big difference in melting point, both oxide and metal fuels have a relatively similar margin to melting during postulated accidents. When the metal fuel cladding fails, it typically occurs below the coolant boiling point and the damaged fuel pins remain coolable. Metal fuel is compatible with sodium coolant, eliminating the potential of energetic fuel--coolant reactions and flow blockages. All these, and the low retained heat leading to a longer grace period for operator action, are significant contributing factors to the inherently benign response of metallic fuel to postulated accidents. This paper summarizes the past analytical and experimental results obtained in past sodium-cooled fast reactor safety programs in the United States, and presents an overview of fuel safety performance as observed in laboratory and in-pile tests.« less

A review of inherent safety characteristics of metal alloy sodium-cooled fast reactor fuel against postulated accidents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sofu, Tanju

2015-04-01

The thermal, mechanical, and neutronic performance of the metal alloy fast reactor fuel design complements the safety advantages of the liquid metal cooling and the pool-type primary system. Together, these features provide large safety margins in both normal operating modes and for a wide range of postulated accidents. In particular, they maximize the measures of safety associated with inherent reactor response to unprotected, double-fault accidents, and to minimize risk to the public and plant investment. High thermal conductivity and high gap conductance play the most significant role in safety advantages of the metallic fuel, resulting in a flatter radial temperaturemore » profile within the pin and much lower normal operation and transient temperatures in comparison to oxide fuel. Despite the big difference in melting point, both oxide and metal fuels have a relatively similar margin to melting during postulated accidents. When the metal fuel cladding fails, it typically occurs below the coolant boiling point and the damaged fuel pins remain cool-able. Metal fuel is compatible with sodium coolant, eliminating the potential of energetic fuel coolant reactions and flow blockages. All these, and the low retained heat leading to a longer grace period for operator action, are significant contributing factors to the inherently benign response of metallic fuel to postulated accidents. This paper summarizes the past analytical and experimental results obtained in past sodium-cooled fast reactor safety programs in the United States, and presents an overview of fuel safety performance as observed in laboratory and in-pile tests.« less

Clinical outcome of dedifferentiated liposarcoma in the extremities: A retrospective case series of 7 patients.

PubMed

Kito, Munehisa; Yoshimura, Yasuo; Isobe, Ken'ichi; Aoki, Kaoru; Suzuki, Shuichiro; Tanaka, Atsushi; Okamoto, Masanori; Sano, Kenji; Kato, Hiroyuki

2016-09-01

Wide resection is the generally recommended surgical treatment for dedifferentiated liposarcoma (DDLPS) in the extremities. However, it may be appropriate to distinguish the surgical margin of low-grade atypical lipomatous tumor (ALT)/well-differentiated liposarcoma (WDLPS) area from the high-grade dedifferentiated area, because the low- and high-grade areas can be clearly separated, both radiologically and histologically. This study re-evaluated the details of surgical margin of DDLPS in the extremities, and aimed to investigate the optimal surgical margin and the usefulness of adjuvant therapy for DDLPS in the extremities. Seven patients diagnosed with DDLPS in the extremities and treated between 1995 and 2013 were analyzed. The use of adjuvant therapy before and after surgery was assessed, and the surgical margins for the ALT/WDLPS and dedifferentiated areas were re-evaluated by using the specimens resected at surgery. Subsequently, the recurrence rates, metastatic rates, and oncological outcomes were examined. Four and three patients had wide (adequate wide margin, n = 3; inadequate wide margin, n = 1) and marginal margins for the dedifferentiated area, respectively, while three and four patients had wide (adequate wide margin, n = 2; inadequate wide margin, n = 1) and marginal margins for the ALT/WDLPS area, respectively. Postoperative radiotherapy was performed in three patients with an inadequate wide margin or a marginal margin for the dedifferentiated area. No patient had local recurrence. Distant metastases occurred in two patients. These patients died of their disease. The other five patients were disease-free. The ALT/WDLPS and dedifferentiated areas in the tumor margin may be better to be considered separately in determining the appropriate resection extent for DDLPS in the extremities. Postoperative radiotherapy may provide good local control for cases with a narrow surgical margin. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

Light Water Reactor Sustainability Program FY13 Status Update for EPRI - RISMC Collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis

2013-09-01

The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway research and development (R&D) is to support plant decisions for risk-informed margins management with the aim to improve economics, reliability, and sustain safety of current NPPs. Goals of the RISMC Pathway are twofold: (1) Develop and demonstrate a risk-assessment method coupled to safety margin quantification that can be used by NPP decision makers as part of their margin recovery strategies. (2) Create an advanced "RISMC toolkit" that enables more accurate representation of NPP safety margin. In order to carry out the R&D needed for the Pathway, the Idaho Nationalmore » Laboratory (INL) is collaborating with the Electric Power Research Institute (EPRI) in order to focus on applications of interest to the U.S. nuclear power industry. This report documents the collaboration activities performed between INL and EPRI during FY2013.« less

Improved Safety Margin Characterization of Risk from Loss of Offsite Power

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Paul

Original intent: The original intent of this task was “support of the Risk-Informed Safety Margin Characteristic (RISMC) methodology in order” “to address … efficiency of computation so that more accurate and cost-effective techniques can be used to address safety margin characterizations” (S. M. Hess et al., “Risk-Informed Safety Margin Characterization,” Procs. ICONE17, Brussels, July 2009, CD format). It was intended that “in Task 1 itself this improvement will be directed toward upon the very important issue of Loss of Offsite Power (LOOP) events,” more specifically toward the challenge of efficient computation of the multidimensional nonrecovery integral that has been discussedmore » by many previous contributors to the theory of nuclear safety. It was further envisioned that “three different computational approaches will be explored,” corresponding to the three subtasks listed below; deliverables were tied to the individual subtasks.« less

Time Safety Margin: Theory and Practice

DTIC Science & Technology

2016-09-01

Basic Dive Recovery Terminology The Simplest Definition of TSM: Time Safety Margin is the time to directly travel from the worst-case vector to an...Safety Margin (TSM). TSM is defined as the time in seconds to directly travel from the worst case vector (i.e. worst case combination of parameters...invoked by this AFI, base recovery planning and risk management upon the calculated TSM. TSM is the time in seconds to di- rectly travel from the worst case

Determination of safety margins for whole blood concentrations of alcohol and nineteen drugs in driving under the influence cases.

PubMed

Kristoffersen, Lena; Strand, Dag Helge; Liane, Veronica Horpestad; Vindenes, Vigdis; Tvete, Ingunn Fride; Aldrin, Magne

2016-02-01

Legislative limits for driving under the influence of 20 non-alcohol drugs were introduced in Norway in February 2012. Per se limits corresponding to blood alcohol concentrations (BAC) of 0.2g/kg were established for 20 psychoactive drugs, and limits for graded sanctions corresponding to BACs of 0.5 and 1.2g/kg were determined for 13 of these drugs. This new legislation made it possible for the courts to make sentences based on the analytical results, similar to the situation for alcohol. To ensure that the reported concentration is as least as high as the true concentration, with a 99% safety level, safety margins had to be calculated for each of the substances. Diazepam, tetrahydrocannabinol (THC) and alcohol were used as model substances to establish a new model for estimating the safety margins. The model was compared with a previous used model established several years ago, by a similar yet much simpler model, and they were found to be in agreement. The measurement uncertainties depend on the standard batch used, the work list and the measurements' replicate. A Bayesian modelling approach was used to determine the parameters in the model, using a dataset of 4700 diazepam positive specimens and 5400 THC positive specimens. Different safety margins were considered for low and high concentration levels of diazepam (≤2μM (0.6mg/L) and >2μM) and THC (≤0.01μM (0.003mg/L) and >0.01μM). The safety margins were for diazepam 19.5% (≤2μM) and 34% (>2μM), for THC 19.5% (≤0.01μM) and 24.9% (>0.01μM). Concentration dependent safety margins for BAC were based on a dataset of 29500 alcohol positive specimens, and were in the range 10.4% (0.1g/kg) to 4.0% (4.0g/kg) at a 99% safety level. A simplified approach was used to establish safety margins for the compounds amphetamine, MDMA, methamphetamine, alprazolam, phenazepam, flunitrazepam, clonazepam, nitrazepam, oxazepam, buprenorphine, GHB, methadone, ketamine, cocaine, morphine, zolpidem and zopiclone. The safety margins for these drugs were in the range 34-41%. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Inductionless or limited shock testing is possible in most patients with implantable cardioverter- defibrillators/cardiac resynchronization therapy defibrillators: results of the multicenter ASSURE Study (Arrhythmia Single Shock Defibrillation Threshold Testing Versus Upper Limit of Vulnerability: Risk Reduction Evaluation With Implantable Cardioverter-Defibrillator Implantations).

PubMed

Day, John D; Doshi, Rahul N; Belott, Peter; Birgersdotter-Green, Ulrika; Behboodikhah, Mahnaz; Ott, Peter; Glatter, Kathryn A; Tobias, Serge; Frumin, Howard; Lee, Byron K; Merillat, John; Wiener, Isaac; Wang, Samuel; Grogin, Harlan; Chun, Sung; Patrawalla, Rob; Crandall, Brian; Osborn, Jeffrey S; Weiss, J Peter; Lappe, Donald L; Neuman, Stacey

2007-05-08

Implantable cardioverter-defibrillators and cardiac resynchronization therapy defibrillators have relied on multiple ventricular fibrillation (VF) induction/defibrillation tests at implantation to ensure that the device can reliably sense, detect, and convert VF. The ASSURE Study (Arrhythmia Single Shock Defibrillation Threshold Testing Versus Upper Limit of Vulnerability: Risk Reduction Evaluation With Implantable Cardioverter-Defibrillator Implantations) is the first large, multicenter, prospective trial comparing vulnerability safety margin testing versus defibrillation safety margin testing with a single VF induction/defibrillation. A total of 426 patients receiving an implantable cardioverter-defibrillator or cardiac resynchronization therapy defibrillator underwent vulnerability safety margin or defibrillation safety margin screening at 14 J in a randomized order. After this, patients underwent confirmatory testing, which required 2 VF conversions without failure at < or = 21 J. Patients who passed their first 14-J and confirmatory tests, irrespective of the results of their second 14-J test, had their devices programmed to a 21-J shock for ventricular tachycardia (VT) or VF > or = 200 bpm and were followed up for 1 year. Of 420 patients who underwent 14-J vulnerability safety margin screening, 322 (76.7%) passed. Of these, 317 (98.4%) also passed 21-J confirmatory tests. Of 416 patients who underwent 14-J defibrillation safety margin screening, 343 (82.5%) passed, and 338 (98.5%) also passed 21-J confirmatory tests. Most clinical VT/VF episodes (32 of 37, or 86%) were terminated by the first shock, with no difference in first shock success. In all observed cases in which the first shock was unsuccessful, subsequent shocks terminated VT/VF without complication. Although spontaneous episodes of fast VT/VF were limited, there was no difference in the odds of first shock efficacy between groups. Screening with vulnerability safety margin or defibrillation safety margin may allow for inductionless or limited shock testing in most patients.

Flexible Control of Safety Margins for Action Based on Environmental Variability.

PubMed

Hadjiosif, Alkis M; Smith, Maurice A

2015-06-17

To reduce the risk of slip, grip force (GF) control includes a safety margin above the force level ordinarily sufficient for the expected load force (LF) dynamics. The current view is that this safety margin is based on the expected LF dynamics, amounting to a static safety factor like that often used in engineering design. More efficient control could be achieved, however, if the motor system reduces the safety margin when LF variability is low and increases it when this variability is high. Here we show that this is indeed the case by demonstrating that the human motor system sizes the GF safety margin in proportion to an internal estimate of LF variability to maintain a fixed statistical confidence against slip. In contrast to current models of GF control that neglect the variability of LF dynamics, we demonstrate that GF is threefold more sensitive to the SD than the expected value of LF dynamics, in line with the maintenance of a 3-sigma confidence level. We then show that a computational model of GF control that includes a variability-driven safety margin predicts highly asymmetric GF adaptation between increases versus decreases in load. We find clear experimental evidence for this asymmetry and show that it explains previously reported differences in how rapidly GFs and manipulatory forces adapt. This model further predicts bizarre nonmonotonic shapes for GF learning curves, which are faithfully borne out in our experimental data. Our findings establish a new role for environmental variability in the control of action. Copyright © 2015 the authors 0270-6474/15/359106-16$15.00/0.

Safety of fenbendazole in common peafowl (Pavo cristatus).

PubMed

Umar, Sajid; Abbas, Seema; Khan, Muhammad Irfan; Nisa, Qamarun; Younus, Muhammad; Aqil, Kiran; Qayyum, Rizwan; Yaqoob, Muhammad; Ali, Asif; Yaseen, Muhammad Asif; Shah, Muhammad Ali

2018-01-01

The present study was undertaken to find out the safety levels of fenbendazole in common peafowl. This bird, raised on aviaries and zoos, can be severely parasitized with Ascaridia galli (enteric worms) and Syngamus trachea (gapeworm) along with other parasitic worms. Fenbendazole is a highly effective benzimidazole-class anthelmintic in animals. The objective of this work was to provide target animal safety data in young peafowl and to demonstrate reproductive safety in adult birds. During the experimental study, diets containing fenbendazole at 0, 100, 200 and 300 ppm were fed for 21 days (three times the normal treatment duration). Data for feed consumption, feed conversion rate, and body weights were recorded for each bird in each group. Drug concentrations in different tissues of birds were determined to correlate concentrations with clinical observations, clinical pathology, and histologic findings. There were no morbidities or mortalities after study day 21. Additionally, there were no statistically significant treatment-related differences among above mentioned parameters. Analysis of fenbendazole concentrations in kidney, liver, leg/thigh, and breast muscle and skin with associated fat revealed that, even at the highest dose level used and with no feed withdrawal, fenbendazole concentrations were relatively low in these tissues. These findings indicate that fenbendazole has a relatively wide margin of safety in young peafowl and that the proposed dose of 100 ppm in the feed for 7 consecutive days is well within the margin of safety. In the reproductive safety study, five breeder peafowl farms fed fendbendazole at 100ppm for 7 days and collected data on hatching percentage of peahen eggs before and after treatment. Reproductive performance in peahen was not adversely affected.

Generalized Tumor Dose for Treatment Planning Decision Support

NASA Astrophysics Data System (ADS)

Zuniga, Areli A.

Modern radiation therapy techniques allow for improved target conformity and normal tissue sparing. These highly conformal treatment plans have allowed dose escalation techniques increasing the probability of tumor control. At the same time this conformation has introduced inhomogeneous dose distributions, making delivered dose characterizations more difficult. The concept of equivalent uniform dose (EUD) characterizes a heterogeneous dose distribution within irradiated structures as a single value and has been used in biologically based treatment planning (BBTP); however, there are no substantial validation studies on clinical outcome data supporting EUD's use and therefore has not been widely adopted as decision-making support. These highly conformal treatment plans have also introduced the need for safety margins around the target volume. These margins are designed to minimize geometrical misses, and to compensate for dosimetric and treatment delivery uncertainties. The margin's purpose is to reduce the chance of tumor recurrence. This dissertation introduces a new EUD formulation designed especially for tumor volumes, called generalized Tumor Dose (gTD). It also investigates, as a second objective, margins extensions for potential improvements in local control while maintaining or minimizing toxicity. The suitability of gTD to rank LC was assessed by means of retrospective studies in a head and neck (HN) squamous cell carcinoma (SCC) and non-small cell lung cancer (NSCLC) cohorts. The formulation was optimized based on two datasets (one of each type) and then, model validation was assessed on independent cohorts. The second objective of this dissertation was investigated by ranking the probability of LC of the primary disease adding different margin sizes. In order to do so, an already published EUD formula was used retrospectively in a HN and a NSCLC datasets. Finally, recommendations for the viability to implement this new formulation into a routine treatment planning process as well as the revision of safety margins to improve local tumor control maximizing normal tissue sparing in SCC of the HN and NSCLC are discussed.

Light Water Reactor Sustainability Program: Risk-Informed Safety Margins Characterization (RISMC) Pathway Technical Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis; Rabiti, Cristian; Martineau, Richard

Safety is central to the design, licensing, operation, and economics of Nuclear Power Plants (NPPs). As the current Light Water Reactor (LWR) NPPs age beyond 60 years, there are possibilities for increased frequency of Systems, Structures, and Components (SSCs) degradations or failures that initiate safety-significant events, reduce existing accident mitigation capabilities, or create new failure modes. Plant designers commonly “over-design” portions of NPPs and provide robustness in the form of redundant and diverse engineered safety features to ensure that, even in the case of well-beyond design basis scenarios, public health and safety will be protected with a very high degreemore » of assurance. This form of defense-in-depth is a reasoned response to uncertainties and is often referred to generically as “safety margin.” Historically, specific safety margin provisions have been formulated, primarily based on “engineering judgment.”« less

Station Blackout: A case study in the interaction of mechanistic and probabilistic safety analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith; Diego Mandelli; Cristian Rabiti

2013-11-01

The ability to better characterize and quantify safety margins is important to improved decision making about nuclear power plant design, operation, and plant life extension. As research and development (R&D) in the light-water reactor (LWR) Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plant safety and performance will become known. The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway R&D is to support plant decisions for risk-informed margin management with the aim tomore » improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe the RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario.« less

Long-term safety concerns with proton pump inhibitors.

PubMed

Ali, Tauseef; Roberts, David Neil; Tierney, William M

2009-10-01

Proton pump inhibitors (PPIs) are among the most widely prescribed medications worldwide. Their use has resulted in dramatic improvements in treatment of peptic ulcer disease and gastroesophageal reflux disease. Despite an acceptable safety profile, mounting data demonstrate concerns about the long-term use of PPIs. To provide a comprehensive review regarding the concerns of long-term PPI use, a literature search was performed to identify pertinent original and review articles. Despite study shortcomings, the collective body of information overwhelmingly suggests an increased risk of infectious complications and nutritional deficiencies. Data regarding any increased risk in gastric or colon malignancy are less convincing. PPIs have revolutionized the management and complications of acid-related disorders with a high margin of safety; however, with the data available, efforts to reduce the dosing of or discontinue the use of PPIs must be reassessed frequently.

System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

NASA Technical Reports Server (NTRS)

Lawton, R. M.

1996-01-01

Demonstration of safety margins for critical points (circuits) has traditionally been required since it first became a part of systems-level Electromagnetic Compatibility (EMC) requirements of MIL-E-6051C. The goal of this document is to present cost-effective guidelines for ensuring adequate Electromagnetic Effects (EME) safety margins on spacecraft critical circuits. It is for the use of NASA and other government agencies and their contractors to prevent loss of life, loss of spacecraft, or unacceptable degradation. This document provides practical definition and treatment guidance to contain costs within affordable limits.

Statistical issues in the design, conduct and analysis of two large safety studies.

PubMed

Gaffney, Michael

2016-10-01

The emergence, post approval, of serious medical events, which may be associated with the use of a particular drug or class of drugs, is an important public health and regulatory issue. The best method to address this issue is through a large, rigorously designed safety study. Therefore, it is important to elucidate the statistical issues involved in these large safety studies. Two such studies are PRECISION and EAGLES. PRECISION is the primary focus of this article. PRECISION is a non-inferiority design with a clinically relevant non-inferiority margin. Statistical issues in the design, conduct and analysis of PRECISION are discussed. Quantitative and clinical aspects of the selection of the composite primary endpoint, the determination and role of the non-inferiority margin in a large safety study and the intent-to-treat and modified intent-to-treat analyses in a non-inferiority safety study are shown. Protocol changes that were necessary during the conduct of PRECISION are discussed from a statistical perspective. Issues regarding the complex analysis and interpretation of the results of PRECISION are outlined. EAGLES is presented as a large, rigorously designed safety study when a non-inferiority margin was not able to be determined by a strong clinical/scientific method. In general, when a non-inferiority margin is not able to be determined, the width of the 95% confidence interval is a way to size the study and to assess the cost-benefit of relative trial size. A non-inferiority margin, when able to be determined by a strong scientific method, should be included in a large safety study. Although these studies could not be called "pragmatic," they are examples of best real-world designs to address safety and regulatory concerns. © The Author(s) 2016.

Effect of Smaller Left Ventricular Capture Threshold Safety Margins to Improve Device Longevity in Recipients of Cardiac Resynchronization-Defibrillation Therapy.

PubMed

Steinhaus, Daniel A; Waks, Jonathan W; Collins, Robert; Kleckner, Karen; Kramer, Daniel B; Zimetbaum, Peter J

2015-07-01

Device longevity in cardiac resynchronization therapy (CRT) is affected by the pacing capture threshold (PCT) and programmed pacing amplitude of the left ventricular (LV) pacing lead. The aims of this study were to evaluate the stability of LV pacing thresholds in a nationwide sample of CRT defibrillator recipients and to determine potential longevity improvements associated with a decrease in the LV safety margin while maintaining effective delivery of CRT. CRT defibrillator patients in the Medtronic CareLink database were eligible for inclusion. LV PCT stability was evaluated using ≥2 measurements over a 14-day period. Separately, a random sample of 7,250 patients with programmed right atrial and right ventricular amplitudes ≤2.5 V, LV thresholds ≤ 2.5 V, and LV pacing ≥90% were evaluated to estimate theoretical battery longevity improvement using LV safety margins of 0.5 and 1.5 V. Threshold stability analysis in 43,256 patients demonstrated LV PCT stability of <0.5 V in 77% of patients and <1 V in 95%. Device longevity analysis showed that the use of a 0.5-V safety margin increased average battery longevity by 0.62 years (95% confidence interval 0.61 to 0.63) compared with a safety margin of 1.5 V. Patients with LV PCTs >1 V had the greatest increases in battery life (mean increase 0.86 years, 95% confidence interval 0.85 to 0.87). In conclusion, nearly all CRT defibrillator patients had LV PCT stability <1.0 V. Decreasing the LV safety margin from 1.5 to 0.5 V provided consistent delivery of CRT for most patients and significantly improved battery longevity. Copyright © 2015 Elsevier Inc. All rights reserved.

Biophysics, environmental stochasticity, and the evolution of thermal safety margins in intertidal limpets.

PubMed

Denny, M W; Dowd, W W

2012-03-15

As the air temperature of the Earth rises, ecological relationships within a community might shift, in part due to differences in the thermal physiology of species. Prediction of these shifts - an urgent task for ecologists - will be complicated if thermal tolerance itself can rapidly evolve. Here, we employ a mechanistic approach to predict the potential for rapid evolution of thermal tolerance in the intertidal limpet Lottia gigantea. Using biophysical principles to predict body temperature as a function of the state of the environment, and an environmental bootstrap procedure to predict how the environment fluctuates through time, we create hypothetical time-series of limpet body temperatures, which are in turn used as a test platform for a mechanistic evolutionary model of thermal tolerance. Our simulations suggest that environmentally driven stochastic variation of L. gigantea body temperature results in rapid evolution of a substantial 'safety margin': the average lethal limit is 5-7°C above the average annual maximum temperature. This predicted safety margin approximately matches that found in nature, and once established is sufficient, in our simulations, to allow some limpet populations to survive a drastic, century-long increase in air temperature. By contrast, in the absence of environmental stochasticity, the safety margin is dramatically reduced. We suggest that the risk of exceeding the safety margin, rather than the absolute value of the safety margin, plays an underappreciated role in the evolution of thermal tolerance. Our predictions are based on a simple, hypothetical, allelic model that connects genetics to thermal physiology. To move beyond this simple model - and thereby potentially to predict differential evolution among populations and among species - will require significant advances in our ability to translate the details of thermal histories into physiological and population-genetic consequences.

Chinese Herbal Therapy for the Treatment of Food Allergy

PubMed Central

Li, Xiu-Min

2014-01-01

Traditional Chinese medicine (TCM) has been widely used in China to treat various diseases for thousands of years. Given its reputed effectiveness, low cost, and favorable safety profile, TCM is attracting great interest in Western societies as a source of therapy for an array of illnesses, including allergies and asthma. Although food allergy has not been described in the TCM literature, a novel treatment for food allergy, named the food allergy herbal formula-2 (FAHF-2), was developed using TCM principles. Using a well-characterized murine model of peanut allergy, FAHF-2 has been shown to be highly effective in providing long-term protection against peanut-induced anaphylaxis, with a high safety margin. Phase 1 human trials have demonstrated the safety of FAHF-2 in food allergic individuals. Currently, a phase 2 trial examining efficacy of FAHF-2 is on-going. Other TCMs also show a potential for treating food allergies in preclinical studies. PMID:22581122

Development of U.S. Government General Technical Requirements for UAS Flight Safety Systems Utilizing the Iridium Satellite Constellation

NASA Technical Reports Server (NTRS)

Murray, Jennifer; Birr, Richard

2010-01-01

This slide presentation reviews the development of technical requirements for Unmanned Aircraft Systems (UAS) utilization of the Iridium Satellite Constellation to provide flight safety. The Federal Aviation Authority (FAA) required an over-the-horizon communication standard to guarantee flight safety before permitting widespread UAS flights in the National Air Space (NAS). This is important to ensure reliable control of UASs during loss-link and over-the-horizon scenarios. The core requirement was to utilize a satellite system to send GPS tracking data and other telemetry from a flight vehicle down to the ground. Iridium was chosen as the system because it is one of the only true satellite systems that has world wide coverage, and the service has a highly reliable link margin. The Iridium system, the flight modems, and the test flight are described.

Comparison of a Traditional Probabilistic Risk Assessment Approach with Advanced Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L; Mandelli, Diego; Zhegang Ma

2014-11-01

As part of the Light Water Sustainability Program (LWRS) [1], the purpose of the Risk Informed Safety Margin Characterization (RISMC) [2] Pathway research and development (R&D) is to support plant decisions for risk-informed margin management with the aim to improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” (SBO) wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe themore » RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario. We also describe our approach we are using to represent advanced flooding analysis.« less

Estimation Of TMDLs And Margin Of Safety Under Conditions Of Uncertainty

EPA Science Inventory

In TMDL development, an adequate margin of safety (MOS) is required in the calculation process to provide a cushion needed because of uncertainties in the data and analysis. Current practices, however, rarely factor analysis' uncertainty in TMDL development and the MOS is largel...

Nanodrugs: pharmacokinetics and safety

PubMed Central

Onoue, Satomi; Yamada, Shizuo; Chan, Hak-Kim

2014-01-01

To date, various nanodrug systems have been developed for different routes of administration, which include dendrimers, nanocrystals, emulsions, liposomes, solid lipid nanoparticles, micelles, and polymeric nanoparticles. Nanodrug systems have been employed to improve the efficacy, safety, physicochemical properties, and pharmacokinetic/pharmacodynamic profile of pharmaceutical substances. In particular, functionalized nanodrug systems can offer enhanced bioavailability of orally taken drugs, prolonged half-life of injected drugs (by reducing immunogenicity), and targeted delivery to specific tissues. Thus, nanodrug systems might lower the frequency of administration while providing maximized pharmacological effects and minimized systemic side effects, possibly leading to better therapeutic compliance and clinical outcomes. In spite of these attractive pharmacokinetic advantages, recent attention has been drawn to the toxic potential of nanodrugs since they often exhibit in vitro and in vivo cytotoxicity, oxidative stress, inflammation, and genotoxicity. A better understanding of the pharmacokinetic and safety characteristics of nanodrugs and the limitations of each delivery option is necessary for the further development of efficacious nanodrugs with high therapeutic potential and a wide safety margin. This review highlights the recent progress in nanodrug system development, with a focus on the pharmacokinetic advantages and safety challenges. PMID:24591825

System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

NASA Technical Reports Server (NTRS)

Lawton, R. M.

1996-01-01

Demonstration of required safety margins on critical electrical/electronic circuits in large complex systems has become an implementation and cost problem. These margins are the difference between the activation level of the circuit and the electrical noise on the circuit in the actual operating environment. This document discusses the origin of the requirement and gives a detailed process flow for the identification of the system electromagnetic compatibility (EMC) critical circuit list. The process flow discusses the roles of engineering disciplines such as systems engineering, safety, and EMC. Design and analysis guidelines are provided to assist the designer in assuring the system design has a high probability of meeting the margin requirements. Examples of approaches used on actual programs (Skylab and Space Shuttle Solid Rocket Booster) are provided to show how variations of the approach can be used successfully.

The Development of Dynamic Human Reliability Analysis Simulations for Inclusion in Risk Informed Safety Margin Characterization Frameworks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey C. Joe; Diego Mandelli; Ronald L. Boring

2015-07-01

The United States Department of Energy is sponsoring the Light Water Reactor Sustainability program, which has the overall objective of supporting the near-term and the extended operation of commercial nuclear power plants. One key research and development (R&D) area in this program is the Risk-Informed Safety Margin Characterization pathway, which combines probabilistic risk simulation with thermohydraulic simulation codes to define and manage safety margins. The R&D efforts to date, however, have not included robust simulations of human operators, and how the reliability of human performance or lack thereof (i.e., human errors) can affect risk-margins and plant performance. This paper describesmore » current and planned research efforts to address the absence of robust human reliability simulations and thereby increase the fidelity of simulated accident scenarios.« less

Effect of Neutron Absorbers Mixed in or Coating the Fuel of a 1-MWt Lithium-Cooled Space Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amiri, Benjamin W.; Los Alamos National Laboratory, Los Alamos, NM 87545; Poston, David I.

2005-02-06

The goal of this study was to determine the effect of various neutron poisons (boron, dysprosium, erbium, and gadolinium) on a 1-MWt, lithium-cooled liquid-metal reactor. The isotopes were considered to be in-fuel poisons, as well as poisons coating the fuel. One way to quantify the effectiveness of a poison in meeting accident-condition requirements is by defining the safety margin as the difference between keff at the beginning of life and keff during the accident scenarios. The isotope that showed the most potential in increasing the safety margin for the wet-sand/water case was 157Gd. The safety margin was 10%-20% greater usingmore » 157Gd as an in-fuel poison as opposed to a coating, depending on the poison quantity. However, the most limiting condition (i.e., the accident scenario with the highest keff, thus the lowest safety margin) is when the reactor is submerged in wet sand. None of the isotopes considered significantly affected the safety margin for the dry-sand case. However, the poison isotopes considered may have applicability for meeting the wet-sand/water keff requirements or as burnable poisons in a moderated system. The views expressed in this document are those of the author and do not necessarily reflect agreement by the government.« less

Marginal Lands: Concept, Assessment and Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kang, Shujiang; Post, Wilfred M; West, Tristram O.

2013-01-01

Marginal lands have received wide attention for their potential to improve food security and support bioenergy production. However, environmental, ecosystem service, and sustainability concerns have been widely raised over the use of marginal land. Knowledge of the extent, location, and quality of marginal lands as well as their assessment and management are limited and diverse. This paper provides a review of the historical development of marginal concept, its application and assessment. Limitations and priority research needs of marginal land assessment and management were discussed.

Topical 5% 5-fluorouracil in the treatment of multifocal basal cell carcinoma of the face: A novel chemotherapeutic approach.

PubMed

Naik, Mayuresh P; Mehta, Anuj; Abrol, Sangeeta; Kumar, Sandeep; Gupta, Vishnu S

2016-12-01

To determine the safety and efficacy of topical 5-fluorouracil (5-FU) 5% ointment in treatment of non-syndromic multifocal basal cell carcinoma. A 55-year-old male patient, with 8 hours of daily sun exposure, having histologically proven and radiologically non-syndromic, multifocal basal cell carcinoma with involvement of 6 sites on the face, was treated with topical 5-FU 5% ointment twice daily over all sites except the site involving lid margin to prevent corneal toxicity. Left lid lesion underwent wide surgical excision with 5-mm clear margins and reconstruction with nasal septal mucoperichondrium and local skin mobilization. Pharmacologic effects first appeared at 4 weeks and by 8 weeks, the lesions had scabbed and had fallen off with no induration but residual mild perilesional erythema. Patient had post-op histopathological clear margins and recovered uneventfully. No recurrence in 6 months. A topical 5-FU 5% ointment represents a paradigm shift in the treatment of BCC from invasive and disfiguring options (surgery and chemoradiotherapy) to cheap, convenient, effective, non-invasive, non-disfiguring topical chemotherapy. Topical 5% 5-FU is a safe and effective modality of treatment of superficial spreading multifocal basal carcinoma, especially lesions larger than 10 mm, where margins cannot be identified clearly and recurrent lesions.

Is it necessary to plan with safety margins for actively scanned proton therapy?

NASA Astrophysics Data System (ADS)

Albertini, F.; Hug, E. B.; Lomax, A. J.

2011-07-01

In radiation therapy, a plan is robust if the calculated and the delivered dose are in agreement, even in the case of different uncertainties. The current practice is to use safety margins, expanding the clinical target volume sufficiently enough to account for treatment uncertainties. This, however, might not be ideal for proton therapy and in particular when using intensity modulated proton therapy (IMPT) plans as degradation in the dose conformity could also be found in the middle of the target resulting from misalignments of highly in-field dose gradients. Single field uniform dose (SFUD) and IMPT plans have been calculated for different anatomical sites and the need for margins has been assessed by analyzing plan robustness to set-up and range uncertainties. We found that the use of safety margins is a good way to improve plan robustness for SFUD and IMPT plans with low in-field dose gradients but not necessarily for highly modulated IMPT plans for which only a marginal improvement in plan robustness could be detected through the definition of a planning target volume.

Increasing Safety of a Robotic System for Inner Ear Surgery Using Probabilistic Error Modeling Near Vital Anatomy

PubMed Central

Dillon, Neal P.; Siebold, Michael A.; Mitchell, Jason E.; Blachon, Gregoire S.; Balachandran, Ramya; Fitzpatrick, J. Michael; Webster, Robert J.

2017-01-01

Safe and effective planning for robotic surgery that involves cutting or ablation of tissue must consider all potential sources of error when determining how close the tool may come to vital anatomy. A pre-operative plan that does not adequately consider potential deviations from ideal system behavior may lead to patient injury. Conversely, a plan that is overly conservative may result in ineffective or incomplete performance of the task. Thus, enforcing simple, uniform-thickness safety margins around vital anatomy is insufficient in the presence of spatially varying, anisotropic error. Prior work has used registration error to determine a variable-thickness safety margin around vital structures that must be approached during mastoidectomy but ultimately preserved. In this paper, these methods are extended to incorporate image distortion and physical robot errors, including kinematic errors and deflections of the robot. These additional sources of error are discussed and stochastic models for a bone-attached robot for otologic surgery are developed. An algorithm for generating appropriate safety margins based on a desired probability of preserving the underlying anatomical structure is presented. Simulations are performed on a CT scan of a cadaver head and safety margins are calculated around several critical structures for planning of a robotic mastoidectomy. PMID:29200595

Increasing safety of a robotic system for inner ear surgery using probabilistic error modeling near vital anatomy

NASA Astrophysics Data System (ADS)

Dillon, Neal P.; Siebold, Michael A.; Mitchell, Jason E.; Blachon, Gregoire S.; Balachandran, Ramya; Fitzpatrick, J. Michael; Webster, Robert J.

2016-03-01

Safe and effective planning for robotic surgery that involves cutting or ablation of tissue must consider all potential sources of error when determining how close the tool may come to vital anatomy. A pre-operative plan that does not adequately consider potential deviations from ideal system behavior may lead to patient injury. Conversely, a plan that is overly conservative may result in ineffective or incomplete performance of the task. Thus, enforcing simple, uniform-thickness safety margins around vital anatomy is insufficient in the presence of spatially varying, anisotropic error. Prior work has used registration error to determine a variable-thickness safety margin around vital structures that must be approached during mastoidectomy but ultimately preserved. In this paper, these methods are extended to incorporate image distortion and physical robot errors, including kinematic errors and deflections of the robot. These additional sources of error are discussed and stochastic models for a bone-attached robot for otologic surgery are developed. An algorithm for generating appropriate safety margins based on a desired probability of preserving the underlying anatomical structure is presented. Simulations are performed on a CT scan of a cadaver head and safety margins are calculated around several critical structures for planning of a robotic mastoidectomy.

Comparing the Affordable Care Act's Financial Impact on Safety-Net Hospitals in States That Expanded Medicaid and Those That Did Not.

PubMed

Dobson, Allen; DaVanzo, Joan E; Haught, Randy; Phap-Hoa, Luu

2017-11-01

Safety-net hospitals play a vital role in delivering health care to Medicaid enrollees, the uninsured, and other vulnerable patients. By reducing the number of uninsured Americans, the Affordable Care Act (ACA) was also expected to lower these hospitals’ significant uncompensated care costs and shore up their financial stability. To examine how the ACA’s Medicaid expansion affected the financial status of safety-net hospitals in states that expanded Medicaid and in states that did not. Using Medicare hospital cost reports for federal fiscal years 2012 and 2015, the authors compared changes in Medicaid inpatient days as a percentage of total inpatient days, Medicaid revenues as a percentage of total net patient revenues, uncompensated care costs as a percentage of total operating costs, and hospital operating margins. Medicaid expansion had a significant, favorable financial impact on safety-net hospitals. From 2012 to 2015, safety-net hospitals in expansion states, compared to those in nonexpansion states, experienced larger increases in Medicaid inpatient days and Medicaid revenues as well as reduced uncompensated care costs. These changes improved operating margins for safety-net hospitals in expansion states. Margins for safety-net hospitals in nonexpansion states, meanwhile, declined.

Safety assessment of plant food supplements (PFS).

PubMed

van den Berg, Suzanne J P L; Serra-Majem, Lluis; Coppens, Patrick; Rietjens, Ivonne M C M

2011-12-01

Botanicals and botanical preparations, including plant food supplements (PFS), are widely used in Western diets. The growing use of PFS is accompanied by an increasing concern because the safety of these PFS is not generally assessed before they enter the market. Regulatory bodies have become more aware of this and are increasing their efforts to ensure the safety of PFS. The present review describes an overview of the general framework for the safety assessment of PFS, focusing on the different approaches currently in use to assess the safety of botanicals and/or botanical compounds, including their history of safe use, the tiered approach proposed by the European Food Safety Authority (EFSA), the Threshold of Toxicological Concern (TTC) and the Margin of Exposure (MOE) concept. Moreover, some examples of botanical compounds in PFS that may be of concern are discussed. Altogether, it is clear that "natural" does not equal "safe" and that PFS may contain compounds of concern at levels far above those found in the regular diet. In addition, the traditional use of a PFS compound as a herb or tea does not guarantee its safety when used as a supplement. This points at a need for stricter regulation and control of botanical containing products, especially given their expanding market volume.

Robust Adaptation? Assessing the sensitivity of safety margins in flood defences to uncertainty in future simulations - a case study from Ireland.

NASA Astrophysics Data System (ADS)

Murphy, Conor; Bastola, Satish; Sweeney, John

2013-04-01

Climate change impact and adaptation assessments have traditionally adopted a 'top-down' scenario based approach, where information from different Global Climate Models (GCMs) and emission scenarios are employed to develop impacts led adaptation strategies. Due to the tradeoffs in the computational cost and need to include a wide range of GCMs for fuller characterization of uncertainties, scenarios are better used for sensitivity testing and adaptation options appraisal. One common approach to adaptation that has been defined as robust is the use of safety margins. In this work the sensitivity of safety margins that have been adopted by the agency responsible for flood risk management in Ireland, to the uncertainty in future projections are examined. The sensitivity of fluvial flood risk to climate change is assessed for four Irish catchments using a large number of GCMs (17) forced with three emissions scenarios (SRES A1B, A2, B1) as input to four hydrological models. Both uncertainty within and between hydrological models is assessed using the GLUE framework. Regionalisation is achieved using a change factor method to infer changes in the parameters of a weather generator using monthly output from the GCMs, while flood frequency analysis is conducted using the method of probability weighted moments to fit the Generalised Extreme Value distribution to ~20,000 annual maxima series. The sensitivity of design margins to the uncertainty space considered is visualised using risk response surfaces. The hydrological sensitivity is measured as the percentage change in flood peak for specified recurrence intervals. Results indicate that there is a considerable residual risk associated with allowances of +20% when uncertainties are accounted for and that the risk of exceedence of design allowances is greatest for more extreme, low frequency events with considerable implication for critical infrastructure, e.g., culverts, bridges, flood defences whose designs are normally associated with such return periods. Sensitivity results show that the impact of climate change is not as great for flood peaks with higher return periods. The average width of the uncertainty range and the size of the range for each catchment reveals that the uncertainties in low frequency events are greater than high frequency events. In addition, the uncertainty interval, estimated as the average width of the uncertainty range of flow for the five return periods, grows wider with a decrease in the runoff coefficient and wetness index of each catchment, both of which tend to increase the nonlinearity in the rainfall response. A key management question that emerges is the acceptability of residual risk where high exposure of vulnerable populations and/or critical infrastructure coincide with high costs of additional capacity in safety margins.

Caffeine citrate - Is it a silver bullet in neonatology?

PubMed

Shrestha, Bikash; Jawa, Gaurav

2017-10-01

Caffeine citrate is one of the most prescribed drug in the present day NICU for apnea. Its efficacy, tolerability, wide therapeutic index and safety margin has made it the drug of choice among the methylxanthines. Its therapeutic uses in apnea of prematurity, mechanical ventilation, bronchopulmonary dysplasia has made it a "silver bullet" in neonatology. However, there are still controversies surrounding this drug. This review is aimed to update the reader about the basic pharmacology, current therapeutic uses, adverse effects, controversies as well as present and future research of caffeine. Copyright © 2017. Published by Elsevier B.V.

Hydraulic safety margins and embolism reversal in stems and leaves: Why are conifers and angiosperms so different?

Treesearch

Daniel M. Johnson; Katherine A. McCulloh; David R. Woodruff; Frederick C. Meinzer

2012-01-01

Angiosperm and coniferous tree species utilize a continuum of hydraulic strategies. Hydraulic safety margins (defined as differences between naturally occurring xylem pressures and pressures that would cause hydraulic dysfunction, or differences between pressures resulting in loss of hydraulic function in adjacent organs (e.g., stems vs. leaves) tend to be much greater...

Derivation of improved load transformation matrices for launchers-spacecraft coupled analysis, and direct computation of margins of safety

NASA Technical Reports Server (NTRS)

Klein, M.; Reynolds, J.; Ricks, E.

1989-01-01

Load and stress recovery from transient dynamic studies are improved upon using an extended acceleration vector in the modal acceleration technique applied to structural analysis. Extension of the normal LTM (load transformation matrices) stress recovery to automatically compute margins of safety is presented with an application to the Hubble space telescope.

Quantifying Safety Margin Using the Risk-Informed Safety Margin Characterization (RISMC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grabaskas, David; Bucknor, Matthew; Brunett, Acacia

2015-04-26

The Risk-Informed Safety Margin Characterization (RISMC), developed by Idaho National Laboratory as part of the Light-Water Reactor Sustainability Project, utilizes a probabilistic safety margin comparison between a load and capacity distribution, rather than a deterministic comparison between two values, as is usually done in best-estimate plus uncertainty analyses. The goal is to determine the failure probability, or in other words, the probability of the system load equaling or exceeding the system capacity. While this method has been used in pilot studies, there has been little work conducted investigating the statistical significance of the resulting failure probability. In particular, it ismore » difficult to determine how many simulations are necessary to properly characterize the failure probability. This work uses classical (frequentist) statistics and confidence intervals to examine the impact in statistical accuracy when the number of simulations is varied. Two methods are proposed to establish confidence intervals related to the failure probability established using a RISMC analysis. The confidence interval provides information about the statistical accuracy of the method utilized to explore the uncertainty space, and offers a quantitative method to gauge the increase in statistical accuracy due to performing additional simulations.« less

Predictors of Payer Mix and Financial Performance Among Safety Net Hospitals Prior to the Affordable Care Act.

PubMed

Sommers, Benjamin D; Stone, Juliana; Kane, Nancy

2016-01-01

The objective of this study was to use audited hospital financial statements to identify predictors of payer mix and financial performance in safety net hospitals prior to the Affordable Care Act. We analyzed the 2010 financial statements of 98 large, urban safety net hospital systems in 34 states, supplemented with data on population demographics, hospital features, and state policies. We used multivariate regression to identify independent predictors of three outcomes: 1) Medicaid-reliant payer mix (hospitals for which at least 25% of hospital days are paid for by Medicaid); 2) safety net revenue-to-cost ratio (Medicaid and Medicare Disproportionate Share Hospital payments and local government transfers, divided by charity care costs and Medicaid payment shortfall); and 3) operating margin. Medicaid-reliant payer mix was positively associated with more inclusive state Medicaid eligibility criteria and more minority patients. More inclusive Medicaid eligibility and higher Medicaid reimbursement rates positively predicted safety net revenue-to-cost ratio. University governance was the strongest positive predictor of operating margin. Safety net hospital financial performance varied considerably. Academic hospitals had higher operating margins, while more generous Medicaid eligibility and reimbursement policies improved hospitals' ability to recoup costs. Institutional and state policies may outweigh patient demographics in the financial health of safety net hospitals. © The Author(s) 2015.

Utilization of cone-beam CT for offline evaluation of target volume coverage during prostate image-guided radiotherapy based on bony anatomy alignment.

PubMed

Paluska, Petr; Hanus, Josef; Sefrova, Jana; Rouskova, Lucie; Grepl, Jakub; Jansa, Jan; Kasaova, Linda; Hodek, Miroslav; Zouhar, Milan; Vosmik, Milan; Petera, Jiri

2012-01-01

To assess target volume coverage during prostate image-guided radiotherapy based on bony anatomy alignment and to assess possibility of safety margin reduction. Implementation of IGRT should influence safety margins. Utilization of cone-beam CT provides current 3D anatomic information directly in irradiation position. Such information enables reconstruction of the actual dose distribution. Seventeen prostate patients were treated with daily bony anatomy image-guidance. Cone-beam CT (CBCT) scans were acquired once a week immediately after bony anatomy alignment. After the prostate, seminal vesicles, rectum and bladder were contoured, the delivered dose distribution was reconstructed. Target dose coverage was evaluated by the proportion of the CTV encompassed by the 95% isodose. Original plans employed a 1 cm safety margin. Alternative plans assuming a smaller 7 mm margin between CTV and PTV were evaluated in the same way. Rectal and bladder volumes were compared with the initial ones. Rectal and bladder volumes irradiated with doses higher than 75 Gy, 70 Gy, 60 Gy, 50 Gy and 40 Gy were analyzed. In 12% of reconstructed plans the prostate coverage was not sufficient. The prostate underdosage was observed in 5 patients. Coverage of seminal vesicles was not satisfactory in 3% of plans. Most of the target underdosage corresponded to excessive rectal or bladder filling. Evaluation of alternative plans assuming a smaller 7 mm margin revealed 22% and 11% of plans where prostate and seminal vesicles coverage, respectively, was compromised. These were distributed over 8 and 7 patients, respectively. Sufficient dose coverage of target volumes was not achieved for all patients. Reducing of safety margin is not acceptable. Initial rectal and bladder volumes cannot be considered representative for subsequent treatment.

Co-ordination of growth, gas exchange and hydraulics define the carbon safety margin in tree species with contrasting drought strategies.

PubMed

Mitchell, P J; O'Grady, A P; Tissue, D T; Worledge, D; Pinkard, E A

2014-05-01

Gas exchange, growth, water transport and carbon (C) metabolism diminish during drought according to their respective sensitivities to declining water status. The timing of this sequence of declining physiological functions may determine how water and C relations compromise plant survival. In this paper, we test the hypothesis that the degree of asynchrony between declining C supply (photosynthesis) and C demand (growth and respiration) determines the rate and magnitude of changes in whole-plant non-structural carbohydrates (NSC) during drought. Two complementary experiments using two tree species (Eucalyptus globulus Labill. and Pinus radiata D. Don) with contrasting drought response strategies were performed to (i) assess changes in radial stem growth, transpiration, leaf water potential and gas exchange in response to chronic drought, and (ii) evaluate the concomitant impacts of these drought responses on the temporal patterns of NSC during terminal drought. The three distinct phases of water stress were delineated by thresholds of growth cessation and stomatal closure that defined the 'carbon safety margin' (i.e., the difference between leaf water potential when growth is zero and leaf water potential when net photosynthesis is zero). A wider C safety margin in E. globulus was defined by an earlier cessation of growth relative to photosynthesis that reduced the demand for NSC while maintaining C acquisition. By contrast, the narrower C safety margin in P. radiata was characterized by a synchronous decline in growth and photosynthesis, whereby growth continued under a declining supply of NSC from photosynthesis. The narrower C safety margin in P. radiata was associated with declines in starch concentrations after ∼ 90 days of chronic drought and significant depletion of starch in all organs at mortality. The observed divergence in the sensitivity of drought responses is indicative of a potential trade-off between maintaining hydraulic safety and adequate C availability. © The Author 2014. Published by Oxford University Press. All rights reserved.

International policy and advisory response regarding children's exposure to radio frequency electromagnetic fields (RF-EMF).

PubMed

Redmayne, Mary

2016-01-01

Radiofrequency electromagnetic field (RF-EMF) exposure regulations/guidelines generally only consider acute effects, and not chronic, low exposures. Concerns for children's exposure are warranted due to the amazingly rapid uptake of many wireless devices by increasingly younger children. This review of policy and advice regarding children's RF-EMF exposure draws material from a wide variety of sources focusing on the current situation. This is not a systematic review, but aims to provide a representative cross-section of policy and advisory responses within set boundaries. There are a wide variety of approaches which I have categorized and tabulated ranging from ICNIRP/IEEE guidelines and "no extra precautions needed" to precautionary or scientific much lower maxima and extensive advice to minimize RF-EMF exposure, ban advertising/sale to children, and add exposure information to packaging. Precautionary standards use what I term an exclusion principle. The wide range of policy approaches can be confusing for parents/carers of children. Some consensus among advisory organizations would be helpful acknowledging that, despite extensive research, the highly complex nature of both RF-EMF and the human body, and frequent technological updates, means simple assurance of long-term safety cannot be guaranteed. Therefore, minimum exposure of children to RF-EMF is recommended. This does not indicate need for alarm, but mirrors routine health-and-safety precautions. Simple steps are suggested. ICNIRP guidelines need to urgently publish how the head, torso, and limbs' exposure limits were calculated and what safety margin was applied since this exposure, especially to the abdomen, is now dominant in many children.

Margins of safety provided by COSHH Essentials and the ILO Chemical Control Toolkit.

PubMed

Jones, Rachael M; Nicas, Mark

2006-03-01

COSHH Essentials, developed by the UK Health and Safety Executive, and the Chemical Control Toolkit (Toolkit) proposed by the International Labor Organization, are 'control banding' approaches to workplace risk management intended for use by proprietors of small and medium-sized businesses. Both systems group chemical substances into hazard bands based on toxicological endpoint and potency. COSSH Essentials uses the European Union's Risk-phrases (R-phrases), whereas the Toolkit uses R-phrases and the Globally Harmonized System (GHS) of Classification and Labeling of Chemicals. Each hazard band is associated with a range of airborne concentrations, termed exposure bands, which are to be attained by the implementation of recommended control technologies. Here we analyze the margin of safety afforded by the systems and, for each hazard band, define the minimal margin as the ratio of the minimum airborne concentration that produced the toxicological endpoint of interest in experimental animals to the maximum concentration in workplace air permitted by the exposure band. We found that the minimal margins were always <100, with some ranging to <1, and inversely related to molecular weight. The Toolkit-GHS system generally produced margins equal to or larger than COSHH Essentials, suggesting that the Toolkit-GHS system is more protective of worker health. Although, these systems predict exposures comparable with current occupational exposure limits, we argue that the minimal margins are better indicators of health protection. Further, given the small margins observed, we feel it is important that revisions of these systems provide the exposure bands to users, so as to permit evaluation of control technology capture efficiency.

Nuclear power: Siting and safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Openshaw, S.

1986-01-01

By 2030, half, or even two-thirds, of all electricity may be generated by nuclear power. Major reactor accidents are still expected to be rare occurrences, but nuclear safety is largely a matter of faith. Terrorist attacks, sabotage, and human error could cause a significant accident. Reactor siting can offer an additional, design-independent margin of safety. Remote geographical sites for new plants would minimize health risks, protect the industry from negative changes in public opinion concerning nuclear energy, and improve long-term public acceptance of nuclear power. U.K. siting practices usually do not consider the contribution to safety that could be obtainedmore » from remote sites. This book discusses the present trends of siting policies of nuclear power and their design-independent margin of safety.« less

Coordination of xylem hydraulics and stomatal regulation in keeping the integrity of xylem water transport in shoots of two compound-leaved tree species.

PubMed

Liu, Yan-Yan; Song, Jia; Wang, Miao; Li, Na; Niu, Cun-Yang; Hao, Guang-You

2015-12-01

Hydraulic segmentation between proximal and distal organs has been hypothesized to be an important protective mechanism for plants to minimize the detrimental effects of drought-induced hydraulic failure. Uncertainties still exist regarding the degree of segmentation and the role of stomatal regulation in keeping hydraulic integrity of organs at different hierarchies. In the present study, we measured hydraulic conductivity and vulnerability in stems, compound leaf petioles and leaflet laminas of Fraxinus mandshurica Rupr. and Juglans mandshurica Maxim. growing in Changbai Mountain of Northeast China to identify the main locality where hydraulic segmentation occurs along the shoot water transport pathway. Stomatal conductance in response to leaf water potential change was also measured to investigate the role of stomatal regulation in avoiding extensive transpiration-induced embolism. No major contrasts were found between stems and compound leaf petioles in either hydraulic conductivity or vulnerability to drought-induced embolism, whereas a large difference in hydraulic vulnerability exists between compound leaf petioles and leaflet laminas. Furthermore, in contrast to the relatively large safety margins in stems (4.13 and 2.04 MPa) and compound leaf petioles (1.33 and 1.93 MPa), leaflet lamina hydraulic systems have substantially smaller or even negative safety margins (-0.17 and 0.47 MPa) in F. mandshurica and J. mandshurica. Under unstressed water conditions, gas exchange may be better optimized by allowing leaflet vascular system function with small safety margins. In the meantime, hydraulic safety of compound leaf petioles and stems are guaranteed by their large safety margins. In facing severe drought stress, larger safety margins in stems than in compound leaf petioles would allow plants to minimize the risk of catastrophic embolism in stems by sacrificing the whole compound leaves. A strong coordination between hydraulic and stomatal regulation appears to play a critical role in balancing the competing efficiency and safety requirements for xylem water transport and use in plants. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Evidence for the hERG Liability of Antihistamines, Antipsychotics, and Anti-Infective Agents: A Systematic Literature Review From the ARITMO Project.

PubMed

Hazell, Lorna; Raschi, Emanuel; De Ponti, Fabrizio; Thomas, Simon H L; Salvo, Francesco; Ahlberg Helgee, Ernst; Boyer, Scott; Sturkenboom, Miriam; Shakir, Saad

2017-05-01

A systematic review was performed to categorize the hERG (human ether-a-go-go-related gene) liability of antihistamines, antipsychotics, and anti-infectives and to compare it with current clinical risk of torsade de pointes (TdP). Eligible studies were hERG assays reporting half-minimal inhibitory concentrations (IC50). A "hERG safety margin" was calculated from the IC50 divided by the peak human plasma concentration (free C max ). A margin below 30 defined hERG liability. Each drug was assigned an "uncertainty score" based on volume, consistency, precision, and internal and external validity of evidence. The hERG liability was compared to existing knowledge on TdP risk (www.credibledrugs.org). Of 1828 studies, 82 were eligible, allowing calculation of safety margins for 61 drugs. Thirty-one drugs (51%) had evidence of hERG liability including 6 with no previous mention of TdP risk (eg, desloratadine, lopinavir). Conversely, 16 drugs (26%) had no evidence of hERG liability including 6 with known, or at least conditional or possible, TdP risk (eg, chlorpromazine, sulpiride). The main sources of uncertainty were the validity of the experimental conditions used (antihistamines and antipsychotics) and nonuse of reference compounds (anti-infectives). In summary, hERG liability was categorized for 3 widely used drug classes, incorporating a qualitative assessment of the strength of available evidence. Some concordance with TdP risk was observed, although several drugs had hERG liability without evidence of clinical risk and vice versa. This may be due to gaps in clinical evidence, limitations of hERG/C max data, or other patient/drug-specific factors that contribute to real-life TdP risk. © 2016, The American College of Clinical Pharmacology.

Developing Probabilistic Safety Performance Margins for Unknown and Underappreciated Risks

NASA Technical Reports Server (NTRS)

Benjamin, Allan; Dezfuli, Homayoon; Everett, Chris

2015-01-01

Probabilistic safety requirements currently formulated or proposed for space systems, nuclear reactor systems, nuclear weapon systems, and other types of systems that have a low-probability potential for high-consequence accidents depend on showing that the probability of such accidents is below a specified safety threshold or goal. Verification of compliance depends heavily upon synthetic modeling techniques such as PRA. To determine whether or not a system meets its probabilistic requirements, it is necessary to consider whether there are significant risks that are not fully considered in the PRA either because they are not known at the time or because their importance is not fully understood. The ultimate objective is to establish a reasonable margin to account for the difference between known risks and actual risks in attempting to validate compliance with a probabilistic safety threshold or goal. In this paper, we examine data accumulated over the past 60 years from the space program, from nuclear reactor experience, from aircraft systems, and from human reliability experience to formulate guidelines for estimating probabilistic margins to account for risks that are initially unknown or underappreciated. The formulation includes a review of the safety literature to identify the principal causes of such risks.

Negative Stress Margins - Are They Real?

NASA Technical Reports Server (NTRS)

Raju, Ivatury S.; Lee, Darlene S.; Mohaghegh, Michael

2011-01-01

Advances in modeling and simulation, new finite element software, modeling engines and powerful computers are providing opportunities to interrogate designs in a very different manner and in a more detailed approach than ever before. Margins of safety are also often evaluated using local stresses for various design concepts and design parameters quickly once analysis models are defined and developed. This paper suggests that not all the negative margins of safety evaluated are real. The structural areas where negative margins are frequently encountered are often near stress concentrations, point loads and load discontinuities, near locations of stress singularities, in areas having large gradients but with insufficient mesh density, in areas with modeling issues and modeling errors, and in areas with connections and interfaces, in two-dimensional (2D) and three-dimensional (3D) transitions, bolts and bolt modeling, and boundary conditions. Now, more than ever, structural analysts need to examine and interrogate their analysis results and perform basic sanity checks to determine if these negative margins are real.

In Vitro Evaluation of Sunscreen Safety: Effects of the Vehicle and Repeated Applications on Skin Permeation from Topical Formulations

PubMed Central

Parenti, Carmela

2018-01-01

The evaluation of UV-filter in vitro percutaneous absorption allows the estimation of the systemic exposure dose (SED) and the margin of safety (MoS) of sunscreen products. As both the vehicle and pattern of application may affect sunscreen safety and efficacy, we evaluated in vitro release and skin permeation of two widely used UV-filters, octylmethoxycinnamate (OMC) and butylmethoxydibenzoylmethane (BMBM) from topical formulations with different features (oil in water (O/W) emulsions with different viscosity, water in oil (W/O) emulsion, oils with different lipophilicity). To mimic in-use conditions, we carried out experiments repeating sunscreen application on the skin surface for three consecutive days. BMBM release from all these vehicles was very low, thus leading to poor skin permeation. The vehicle composition significantly affected OMC release and skin permeation, and slight increases of OMC permeation were observed after repeated applications. From skin permeation data, SED and MoS values of BMBM and OMC were calculated for all the investigated formulations after a single application and repeated applications. While MoS values of BMBM were always well beyond the accepted safety limit, the safety of sunscreen formulations containing OMC may depend on the vehicle composition and the application pattern. PMID:29495452

Margin of Safety Definition and Examples Used in Safety Basis Documents and the USQ Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beaulieu, R. A.

The Nuclear Safety Management final rule, 10 CFR 830, provides an undefined term, margin of safety (MOS). Safe harbors listed in 10 CFR 830, Table 2, such as DOE-STD-3009 use but do not define the term. This lack of definition has created the need for the definition. This paper provides a definition of MOS and documents examples of MOS as applied in a U.S. Department of Energy (DOE) approved safety basis for an existing nuclear facility. If we understand what MOS looks like regarding Technical Safety Requirements (TSR) parameters, then it helps us compare against other parameters that do notmore » involve a MOS. This paper also documents parameters that are not MOS. These criteria could be used to determine if an MOS exists in safety basis documents. This paper helps DOE, including the National Nuclear Security Administration (NNSA) and its contractors responsible for the safety basis improve safety basis documents and the unreviewed safety question (USQ) process with respect to MOS.« less

Margins in extra-abdominal desmoid tumors: a comparative analysis.

PubMed

Leithner, Andreas; Gapp, Markus; Leithner, Katharina; Radl, Roman; Krippl, Peter; Beham, Alfred; Windhager, Reinhard

2004-06-01

The main treatment of extra-abdominal desmoid tumors remains surgery, but recurrence rates up to 80% are reported. The impact of microscopic surgical margin status according to the Enneking classification system is discussed controversially. Therefore, the authors screened the published literature for reliable data on the importance of a wide or radical excision of extra-abdominal desmoid tumors. All studies with more than ten patients, a surgical treatment only, and margin status stated were included. Only 12 out of 49 identified studies fulfilled the inclusion criteria. One hundred fifty-two primary tumors were excised with wide or radical microscopic surgical margins, while in 260 cases a marginal or intralesional excision was performed. In the first group 41 patients (27%) and in the second one 187 patients (72%) developed a recurrence. Therefore, microscopic surgical margin status according to the Enneking classification system is a significant prognostic factor (P < 0.001). The data of this review underline the strategy of a wide or radical local excision as the treatment of choice. Furthermore, as a large number of studies had to be excluded from this analysis, exact microscopic surgical margin status should be provided in future studies in order to allow comparability. . Copyright 2004 Wiley-Liss, Inc.

Initial Results from the 2002 Gulf of California Conjugate Margin Seismic Experiment

NASA Astrophysics Data System (ADS)

Holbrook, S.; Lizarralde, D.; Kent, G.; Harding, A.; Fletcher, J.; Gonzalez-Fernandez, A.; Umhoefer, P.; Axen, G.

2003-04-01

The Gulf of California, which marks the ongoing separation of Baja California from mainland Mexico, is one of the few locales where active continental breakup can be studied along unambiguous flow lines that join clear conjugate margin pairs. In Fall 2002, we conducted an onshore-offshore seismic experiment across the conjugate rifted margins of the Gulf of California in several rift segments. The joint U.S.-Mexico project, sponsored principally by the MARGINS program of the U.S. National Science Foundation, aimed to image crustal structure across conjugate margins of four major basins to determine the modes of extension and the influence of sedimentation and magmatism on breakup. Here we present an overview of the experiment, which was substantially altered at sea due to concerns for marine-mammal safety, and present some preliminary findings. Three flow-line transects were acquired, in the Alarcon Basin, the Guaymas Basin, and between Cabo and Tres Marias Islands. In addition, a fourth transect across the Baja Peninsula was acquired. Data acquired included (1) multichannel seismic reflection data using the R/V Ewing’s 20-gun array and 480-channel, 6-km-long streamer, (2) wide-angle reflection/refraction data recorded on ocean-bottom seismometers, from 206 deployments conducted by the R/V New Horizon, and (3) onshore-offshore data recorded on portable seismometers deployed up to 100 km inland on all transects. Initial results from the experiment include (1) clear evidence for asymmetric basement structure on the conjugate rifted margins and across the active mid-ocean spreading center, of the Guaymas Basin, (2) the suggestion of substantial magmatism in an early failed rift of the Alarcon Basin, and (3) active subduction beneath the margin at the Tres Marias islands. In addition, we will discuss new procedures for mitigating effects on marine mammals that may have a significant impact on future U.S.-sponsored seismic reflection activities.

Prediction of Safety Margin and Optimization of Dosing Protocol for a Novel Antibiotic using Quantitative Systems Pharmacology Modeling.

PubMed

Woodhead, Jeffrey L; Paech, Franziska; Maurer, Martina; Engelhardt, Marc; Schmitt-Hoffmann, Anne H; Spickermann, Jochen; Messner, Simon; Wind, Mathias; Witschi, Anne-Therese; Krähenbühl, Stephan; Siler, Scott Q; Watkins, Paul B; Howell, Brett A

2018-06-07

Elevations of liver enzymes have been observed in clinical trials with BAL30072, a novel antibiotic. In vitro assays have identified potential mechanisms for the observed hepatotoxicity, including electron transport chain (ETC) inhibition and reactive oxygen species (ROS) generation. DILIsym, a quantitative systems pharmacology (QSP) model of drug-induced liver injury, has been used to predict the likelihood that each mechanism explains the observed toxicity. DILIsym was also used to predict the safety margin for a novel BAL30072 dosing scheme; it was predicted to be low. DILIsym was then used to recommend potential modifications to this dosing scheme; weight-adjusted dosing and a requirement to assay plasma alanine aminotransferase (ALT) daily and stop dosing as soon as ALT increases were observed improved the predicted safety margin of BAL30072 and decreased the predicted likelihood of severe injury. This research demonstrates a potential application for QSP modeling in improving the safety profile of candidate drugs. © 2018 The Authors. Clinical and Translational Science published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.

A theory and model of conflict detection in air traffic control: incorporating environmental constraints.

PubMed

Loft, Shayne; Bolland, Scott; Humphreys, Michael S; Neal, Andrew

2009-06-01

A performance theory for conflict detection in air traffic control is presented that specifies how controllers adapt decisions to compensate for environmental constraints. This theory is then used as a framework for a model that can fit controller intervention decisions. The performance theory proposes that controllers apply safety margins to ensure separation between aircraft. These safety margins are formed through experience and reflect the biasing of decisions to favor safety over accuracy, as well as expectations regarding uncertainty in aircraft trajectory. In 2 experiments, controllers indicated whether they would intervene to ensure separation between pairs of aircraft. The model closely predicted the probability of controller intervention across the geometry of problems and as a function of controller experience. When controller safety margins were manipulated via task instructions, the parameters of the model changed in the predicted direction. The strength of the model over existing and alternative models is that it better captures the uncertainty and decision biases involved in the process of conflict detection. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

Final stress analysis report ultraviolet spectrometer S169

NASA Technical Reports Server (NTRS)

Cooper, S.

1971-01-01

The stress analysis report verifies the structural integrity of the Apollo S-169 UV-spectrometer experiment. The methods by which the various members were analyzed are described. A detailed summary of results for the individual structural elements appears in the form of a table of minimum margins of safety. No negative margins of safety were experienced. It is concluded that the component structure is more than adequate to withstand the environmental load conditions given in the design criteria.

Hydraulic safety margins and air-seeding thresholds in roots, trunks, branches and petioles of four northern hardwood trees.

PubMed

Wason, Jay W; Anstreicher, Katherine S; Stephansky, Nathan; Huggett, Brett A; Brodersen, Craig R

2018-04-16

During drought, xylem sap pressures can approach or exceed critical thresholds where gas embolisms form and propagate through the xylem network, leading to systemic hydraulic dysfunction. The vulnerability segmentation hypothesis (VSH) predicts that low-investment organs (e.g. leaf petioles) should be more vulnerable to embolism spread compared to high-investment, perennial organs (e.g. trunks, stems), as a means of mitigating embolism spread and excessive negative pressures in the perennial organs. We tested this hypothesis by measuring air-seeding thresholds using the single-vessel air-injection method and calculating hydraulic safety margins in four northern hardwood tree species of the northeastern United States, in both saplings and canopy height trees, and at five points along the soil-plant-atmosphere continuum. Acer rubrum was the most resistant to air-seeding and generally supported the VSH. However, Fagus grandifolia, Fraxinus americana and Quercus rubra showed little to no variation in air-seeding thresholds across organ types within each species. Leaf-petiole xylem operated at water potentials close to or exceeding their hydraulic safety margins in all species, whereas roots, trunks and stems of A. rubrum, F. grandifolia and Q. rubra operated within their safety margins, even during the third-driest summer in the last 100 yr. © 2018 The Authors. New Phytologist © 2018 New Phytologist Trust.

Tailored Excitation for Multivariable Stability-Margin Measurement Applied to the X-31A Nonlinear Simulation

NASA Technical Reports Server (NTRS)

Bosworth, John T.; Burken, John J.

1997-01-01

Safety and productivity of the initial flight test phase of a new vehicle have been enhanced by developing the ability to measure the stability margins of the combined control system and vehicle in flight. One shortcoming of performing this analysis is the long duration of the excitation signal required to provide results over a wide frequency range. For flight regimes such as high angle of attack or hypersonic flight, the ability to maintain flight condition for this time duration is difficult. Significantly reducing the required duration of the excitation input is possible by tailoring the input to excite only the frequency range where the lowest stability margin is expected. For a multiple-input/multiple-output system, the inputs can be simultaneously applied to the control effectors by creating each excitation input with a unique set of frequency components. Chirp-Z transformation algorithms can be used to match the analysis of the results to the specific frequencies used in the excitation input. This report discusses the application of a tailored excitation input to a high-fidelity X-31A linear model and nonlinear simulation. Depending on the frequency range, the results indicate the potential to significantly reduce the time required for stability measurement.

[Nitrates (V) in drinking water as factor of a health risk for people in Podlaskie Voivodship].

PubMed

Szczerbiński, Robert; Karczewski, Jan; Fiłon, Joanna

2006-01-01

The aim of this article was to evaluate of a health danger and to estimate the risk due to the presence of nitrates (V) in drinking water used by people in Podlaskie Voivodship. For research I used water specimens taken in 14 poviats (smaller administration districts) in Podlaskie Voivodship as part of drinking water quality monitoring in the years 2001-2003. Evaluation of danger of nitrates (V) taken in with drinking water by the population of Podlaskie Voivodship was carried out by comparing ADI (Acceptable Daily Intake) with value of EDI (Evaluated Daily Intake) and TMDI (Theoretical Maximum Daily Intake) Risk was estimated by calculating safety margin between ADI and EDI. On the basis of the obtained results it was stated that on the territory of Podlaskie Voivodship 1.79% of urban population and 4.86% of rural population, was taking in nitrates (V) with water supplied by waterworks in doses below the safety margin. Nitrates (V) from drinking water in doses below the safety margin were taken in by population of 10 poviats, with the highest percentage of the population noted in the poviats of: Grajewo (10.97%), Augustów (10.77%) and Sejny (10.43%). Among the urban population the highest percentage noted in the Poviat of Augustów (9.46%), and among the rural population--in the Poviat of Grajewo (22.46%). The highest percentage of the population (69.97%) in Podlaskie Voivodship consumed nitrates (V) with drinking water supplied by waterworks in the range of the safety margin from 1 to 10, including 78.86% of urban population and 53.3% of rural population. It seems useful to continue the environmental research on the exposure of Podlaskie Voivodship inhabitants to nitrates by correlating the risk expressed by the safety margin with cancer epidemiology.

Marginalization in neural circuits with divisive normalization

PubMed Central

Beck, J.M.; Latham, P.E.; Pouget, A.

2011-01-01

A wide range of computations performed by the nervous system involves a type of probabilistic inference known as marginalization. This computation comes up in seemingly unrelated tasks, including causal reasoning, odor recognition, motor control, visual tracking, coordinate transformations, visual search, decision making, and object recognition, to name just a few. The question we address here is: how could neural circuits implement such marginalizations? We show that when spike trains exhibit a particular type of statistics – associated with constant Fano factors and gain-invariant tuning curves, as is often reported in vivo – some of the more common marginalizations can be achieved with networks that implement a quadratic nonlinearity and divisive normalization, the latter being a type of nonlinear lateral inhibition that has been widely reported in neural circuits. Previous studies have implicated divisive normalization in contrast gain control and attentional modulation. Our results raise the possibility that it is involved in yet another, highly critical, computation: near optimal marginalization in a remarkably wide range of tasks. PMID:22031877

Structure across the northeastern margin of Flemish Cap, offshore Newfoundland from Erable multichannel seismic reflection profiles: evidence for a transtensional rifting environment

NASA Astrophysics Data System (ADS)

Welford, J. Kim; Hall, Jeremy; Sibuet, Jean-Claude; Srivastava, Shiri P.

2010-11-01

We present the results from processing and interpreting nine multichannel seismic reflection lines collected during the 1992 Erable experiment over the northeastern margin of Flemish Cap offshore Newfoundland. These lines, combined into five cross-sections, provide increased seismic coverage over this lightly probed section of the margin and reveal tectonically significant along-strike variations in the degree and compartmentalization of crustal thinning. Similar to the southeastern margins of Flemish Cap and the Grand Banks, a transitional zone of exhumed serpentinized mantle is interpreted between thinned continental and oceanic crust. The 25 km wide transitional zone bears similarities to the 120 km wide transitional zone interpreted as exhumed serpentinized mantle on the conjugate Irish Atlantic margin but the significant width difference is suggestive of an asymmetric conjugate pair. A 40-50 km wide zone of inferred strike-slip shearing is interpreted and observed to extend along most of the northeastern margin of Flemish Cap. Individual shear zones (SZs) may represent extensions of SZs and normal faults within the Orphan Basin providing further evidence for the rotation and displacement of Flemish Cap out of Orphan Basin. The asymmetry between the Flemish Cap and Irish conjugate pairs is likely due in large part to the rotation and displacement of Flemish Cap which resulted in the Flemish Cap margin displaying features of both a strike-slip margin and an extensional margin.

Margins Associated with Loss of Assured Safety for Systems with Multiple Time-Dependent Failure Modes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Helton, Jon C.; Brooks, Dusty Marie; Sallaberry, Cedric Jean-Marie.

Representations for margins associated with loss of assured safety (LOAS) for weak link (WL)/strong link (SL) systems involving multiple time-dependent failure modes are developed. The following topics are described: (i) defining properties for WLs and SLs, (ii) background on cumulative distribution functions (CDFs) for link failure time, link property value at link failure, and time at which LOAS occurs, (iii) CDFs for failure time margins defined by (time at which SL system fails) – (time at which WL system fails), (iv) CDFs for SL system property values at LOAS, (v) CDFs for WL/SL property value margins defined by (property valuemore » at which SL system fails) – (property value at which WL system fails), and (vi) CDFs for SL property value margins defined by (property value of failing SL at time of SL system failure) – (property value of this SL at time of WL system failure). Included in this presentation is a demonstration of a verification strategy based on defining and approximating the indicated margin results with (i) procedures based on formal integral representations and associated quadrature approximations and (ii) procedures based on algorithms for sampling-based approximations.« less

Flebogamma® 5% DIF development: rationale for a new option in intravenous immunoglobulin therapy

PubMed Central

Jorquera, J I

2009-01-01

Flebogamma® 5% dual inactivation and filtration (DIF), a new 5% liquid intravenous immunoglobulin with a stability of 2 years when stored at temperatures between 2 and 30°C, has been developed. This new product is the result of the accumulated experience provided by Flebogamma®, with more than 30 million grams administered since 1992 in Europe and the United States, and the implementation of the latest technology to improve Flebogamma® even more by increasing its viral safety margin further. In addition to the specific inactivation stage for Flebogamma® 5% (pasteurization), the new process includes a solvent–detergent treatment and nanofiltration through a Planova filter down to 20 nm. The preparation presents a mean purity of 99·6 ± 0·2% with a correct chromatographic profile. Percentage values of immunoglobulin (Ig)G subclasses are equivalent to the physiological values of normal serum. The content in IgA as well as other possible impurities is very low, and the product presents a mean result of 109 ± 5% in the Fc fragment functionality assay, demonstrating the integrity of the IgG molecule. The functionality is also reflected in neutralization tests carried out against poliomyelitis, diphtheria, measles and vaccinia which, apart from the antibody titres determined by enzyme-linked immunosorbent assay, guarantees that antibodies are capable of reacting against these pathogens. Regarding safety, the combination of multiple methods with capacity to inactivate or remove biological agents which include chemical inactivation, heat inactivation, nanofiltration and precipitations, with very different mechanisms of action, provides Flebogamma® 5% DIF very wide margins of safety regarding to potential pathogens. PMID:19630865

Safe insertion of S-2 alar iliac screws: radiological comparison between 2 insertion points using computed tomography and 3D analysis software.

PubMed

Yamada, Kentaro; Abe, Yuichiro; Satoh, Shigenobu

2018-05-01

OBJECTIVE S-2 alar iliac (S2AI) screws are commonly used as anchors for lumbosacral fixation. A serious potential complication of screw insertion is major vascular injury due to anterior or caudal screw deviation. To avoid screw deviation, the pelvic inlet view on intraoperative fluoroscopy images is recommended. However, there has been no detailed investigation of optimal fluoroscopic incline with the pelvic inlet view. The purpose of this study was to investigate the safety margins and to optimize fluoroscopic settings to avoid screw deviation with 2 reported insertion techniques using 3D analysis software and CT. METHODS The study included 50 patients (25 men and 25 women) who underwent abdominal-pelvic CT. With the use of software, the ideal S2AI screws were set from 2 entry points: A) the midpoint between the S-1 dorsal foramen and the S-2 dorsal foramen where they meet the lateral sacral crest, and B) 1 mm inferior and 1 mm lateral to the S-1 dorsal foramen. Anteriorly or caudally deviated screws were defined as deviation of a half thread of the ideal screw by rotation anteriorly or caudally from the entry point. The angular safety margins were compared between the 2 entry points, and patients with small safety margins were investigated. Subsequently, fluoroscopic images were virtualized on ray sum-rendered images. Conditions that provided proper recognition of screw deviation were investigated via lateral and anteroposterior views with the beam tilted caudally. RESULTS The safety margins of S2AI screws were smaller in the anterior direction than in the caudal direction and by entry point A than by entry point B (A: 9.1° ± 1.6° and B: 9.7° ± 1.5° in the anterior direction; A: 10.9° ± 3.8° and B: 13.9° ± 4.1° in the caudal direction). In contrast, patients with a deep-seated L-5 vertebral body tended to have smaller safety margins in the caudal direction. All anteriorly deviated screws were recognized with a 60°-70° inlet view from the S-1 slope. The caudally deviated screws were all recognized on the lateral view, but 31% of screws at entry point A and 21% of screws at entry point B were not recognized on the pelvic inlet view. CONCLUSIONS S2AI screws should be carefully placed to avoid anterior deviation compared with caudal deviation in terms of the safety margin, except in patients with a deep-seated L-5. The difference in safety margins between entry points A and B was negligible. Intraoperative fluoroscopy is recommended with a pelvic inlet view tilted 60°-70° from the S-1 slope to avoid anterior screw deviation. The lateral view is recommended to confirm that the screw is not deviated caudally.

Effect of 90-day continuous exposure to methylisobutylketone on dogs, monkeys and rats

NASA Technical Reports Server (NTRS)

Macewen, J. D.; Vernot, E. H.; Haun, C. C.

1971-01-01

Continuous exposure of rats, dogs and monkeys to 410 mg/cu M methylisobutylketone vapor (MIBK) was conducted to evaluate the provisional spacecraft exposure limit of 20 ppm established by the Space Science Board in 1968. The exposure, conducted in a simulated space cabin environment, did not produce any measurable changes in dogs or monkeys. Rats developed hyaline droplet nephrosis within 2 weeks of exposure which was reversible upon removal from the MIBK even after 90 days. The data obtained indicated that the 60-minute emergency exposure limit of 100 ppm and the 90- and 1000-day provisional limits as established by the Space Science Board contain a wide margin of safety.

Probabilistic margin evaluation on accidental transients for the ASTRID reactor project

NASA Astrophysics Data System (ADS)

Marquès, Michel

2014-06-01

ASTRID is a technological demonstrator of Sodium cooled Fast Reactor (SFR) under development. The conceptual design studies are being conducted in accordance with the Generation IV reactor objectives, particularly in terms of improving safety. For the hypothetical events, belonging to the accidental category "severe accident prevention situations" having a very low frequency of occurrence, the safety demonstration is no more based on a deterministic demonstration with conservative assumptions on models and parameters but on a "Best-Estimate Plus Uncertainty" (BEPU) approach. This BEPU approach ispresented in this paper for an Unprotected Loss-of-Flow (ULOF) event. The Best-Estimate (BE) analysis of this ULOFt ransient is performed with the CATHARE2 code, which is the French reference system code for SFR applications. The objective of the BEPU analysis is twofold: first evaluate the safety margin to sodium boiling in taking into account the uncertainties on the input parameters of the CATHARE2 code (twenty-two uncertain input parameters have been identified, which can be classified into five groups: reactor power, accident management, pumps characteristics, reactivity coefficients, thermal parameters and head losses); secondly quantify the contribution of each input uncertainty to the overall uncertainty of the safety margins, in order to refocusing R&D efforts on the most influential factors. This paper focuses on the methodological aspects of the evaluation of the safety margin. At least for the preliminary phase of the project (conceptual design), a probabilistic criterion has been fixed in the context of this BEPU analysis; this criterion is the value of the margin to sodium boiling, which has a probability 95% to be exceeded, obtained with a confidence level of 95% (i.e. the M5,95percentile of the margin distribution). This paper presents two methods used to assess this percentile: the Wilks method and the Bootstrap method ; the effectiveness of the two methods is compared on the basis of 500 simulations performed with theCATHARE2 code. We conclude that, with only 100 simulations performed with the CATHARE2 code, which is a number of simulations workable in the conceptual design phase of the ASTRID project where the models and the hypothesis are often modified, it is best in order to evaluate the percentile M5,95 of the margin to sodium boiling to use the bootstrap method, which will provide a slightly conservative result. On the other hand, in order to obtain an accurate estimation of the percentileM5,95, for the safety report for example, it will be necessary to perform at least 300 simulations with the CATHARE2 code. In this case, both methods (Wilks and Bootstrap) would give equivalent results.

Transition from magma dominant to magma poor rifting along the Nova Scotia Continental Margin

NASA Astrophysics Data System (ADS)

Lau, K. H.; Louden, K. E.; Nedimović, M. R.; Whitehead, M.; Farkas, A.; Watremez, L.; Dehler, S. A.

2011-12-01

Passive margins have been characterized as magma-dominant (volcanic) or magma-poor (non-volcanic). However, the conditions under which margins might switch states are not well understood as they typically have been studied as end member examples in isolation to each other. The Nova Scotia (NS) continental margin, however, offers an opportunity to study the nature of such a transition between the magma-dominant US East Coast margin to the south and the magma-poor Newfoundland margin to the north within a single rift segment. This transition is evidenced by a clear along-strike reduction in features characteristic of syn-rift volcanism from south-to-north along the NS margin, such as the weakening of the East Coast Magnetic Anomaly (ECMA) and the coincident disappearance of seaward dipping reflector sequences (SDRS) on multichannel seismic (MCS) reflection profiles. Results from recent industry MCS profiles along and across the margin suggest a potentially narrow magma-dominant to magma-poor along-strike transition between the southern and the central NS margin. Such a transition is broadly consistent with results of several widely-spaced, across-strike ocean bottom seismometer (OBS) wide-angle profiles. In the southern region, the crustal structure exhibits a narrow (~120-km wide) ocean-continent transition (OCT) with a high velocity (7.2 km/s) lower crust, interpreted as a gabbro-rich underplated melt, beneath the SDRS and the ECMA, similar to crustal models across the US East Coast. In contrast, profiles across the central and northern margin contain a much wider OCT (150-200-km wide) underlain by a low velocity mantle layer (7.3-7.9 km/s), interpreted as partially serpentinized olivine, which is similar to the magma-poor Newfoundland margin to the north. However, the central-to-northern OBS profiles also exhibit significant variations within the OCT and the along-strike continuity of these OCT structures is not yet clear. In November 2010, we acquired, in the OCTOPUS survey, wide-angle seismic data along a 240-km-long margin parallel profile extending from the central to the northern margin segments along an existing industry MCS profile (Ion/GX Technology NovaSPAN 5100). Twenty OBSs at 10-km spacing were analysed. A preliminary p-wave velocity model along the profile indicates that the cross-strike structures are continuous within the OCT. However, a substantial anisotropy in velocity (~8% lower parallel to the margin) is observed within the OCT. This result is consistent with an interpretation of partially serpentinized mantle that flowed perpendicular to the margin during its extension. In addition, along strike variations are also observed along the profile, which suggest a higher degree of volcanism and a thinner layer of serpentinized mantle to the southwest. These results provide a framework for future studies to the southwest to further investigate the transition to a magma-dominant regime towards the US East Coast.

Cryptosporidium and Giardia safety margin increase in leafy green vegetables irrigated with treated wastewater.

PubMed

Domenech, Eva; Amorós, Inmaculada; Moreno, Yolanda; Alonso, José L

2018-01-01

The presence of Cryptosporidium and Giardia in waste water is a main concern because water reuse for irrigation can jeopardize human health. Spanish Legislation for water reuse does not oblige to analyze the presence of both pathogens Cryptosporidium and Giardia in reused water for irrigation. Therefore, the objective of this paper is to determine the influence of wastewater treatment in the increase of the consumer safety margin in relation to the presence of Cryptosporidium and Giardia in leafy green vegetables. With this aim in mind, a total of 108 samples from raw (influent) and treated wastewater (effluent) from three wastewater treatment plants in Spain were analysed according to USEPA Method 1623. Effluent results show that Cryptosporidium oocysts average counts ranged from 1.38 to 2.6/L oocysts and Giardia cysts ranged from 0.6 to 1.7/L cysts, which means a removal values of 2.7 log, 2.5 log and 1.8 log for Cryptosporidium oocysts and 1 log, 2 log and 2.2 log for Giardia cysts in the three wastewater treatment plants analysed. In relation to safety margin the highest probability that exposure exceed the dose response was observed for Giardia. In addition, the sensitivity analysis showed that (oo)cysts concentration present in the leafy green vegetables and the human dose-response were the most influential inputs in the safety margin obtained. Copyright © 2017 The Authors. Published by Elsevier GmbH.. All rights reserved.

Lower crustal strength controls on melting and type of oceanization at magma-poor margins

NASA Astrophysics Data System (ADS)

Ros, E.; Perez-Gussinye, M.; Araujo, M. N.; Thoaldo Romeiro, M.; Andres-Martinez, M.; Morgan, J. P.

2017-12-01

Geodynamical models have been widely used to explain the variability in the architectonical style of conjugate rifted margins as a combination of lithospheric deformation modes, which are strongly influenced by lower crustal strength. We use 2D numerical models to show that the lower crustal strength also plays a key role on the onset and amount of melting and serpentinization during continental rifting. The relative timing between melting and serpentinization onsets controls whether the continent-ocean transition (COT) of margins will be predominantly magmatic or will mainly consist of exhumed and serpentinized mantle. Based on our results for magma-poor continental rifting, we propose a genetic link between margin architecture and COT styles that can be used as an additional tool to help interpret and understand the processes leading to margin formation. Our results show that strong lower crusts and very slow extension velocities (<5 mm/yr) lead to either symmetric or asymmetric margins with large oceanward dipping faults, strong syn-rift subsidence and abrupt crustal tapering beneath the continental shelf. These margins are characterized by a COT consisting of exhumed and serpentinized mantle and some magmatic products. Weak lower crusts at ultra-slow velocities lead also to either symmetric or asymmetric margins with small faults dipping both ocean- and landward, small syn-rift subsidence and gentle crustal tapering, and present a predominantly magmatic COT, perhaps underlain by some serpentinized mantle. When conjugate margins are asymmetric, if the rheology is relatively strong, serpentinite predominantly underlays the wide margin, whereas if the lower crustal strength is weak, melt preferentially migrates towards the wide margin. Based on the onshore lithospheric structure, extension velocity and margin architecture of the magma-poor section of the South Atlantic, we suggest that the COT of the northern sector, Camamu-Gabon basins, is more likely to consist of exhumed mantle with intruded magmatism, while to the South, the Camamu-Kwanza and North Santos-South Kwanza conjugates, may be better characterized by a predominantly magmatic COT.

Multilayer Disk Reduced Interlayer Crosstalk with Wide Disk-Fabrication Margin

NASA Astrophysics Data System (ADS)

Hirotsune, Akemi; Miyauchi, Yasushi; Endo, Nobumasa; Onuma, Tsuyoshi; Anzai, Yumiko; Kurokawa, Takahiro; Ushiyama, Junko; Shintani, Toshimichi; Sugiyama, Toshinori; Miyamoto, Harukazu

2008-07-01

To reduce interlayer crosstalk caused by the ghost spot which appears in a multilayer optical disk with more than three information layers, a multilayer disk structure which reduces interlayer crosstalk with a wide disk-fabrication margin was proposed in which the backward reflectivity of the information layers is sufficiently low. It was confirmed that the interlayer crosstalk caused by the ghost spot was reduced to less than the crosstalk from the adjacent layer by controlling backward reflectivity. The wide disk-fabrication margin of the proposed disk structure was indicated by experimentally confirming that the tolerance of the maximum deviation of the spacer-layer thickness is four times larger than that in the previous multilayer disk.

The synthetic diazonamide DZ-2384 has distinct effects on microtubule curvature and dynamics without neurotoxicity

PubMed Central

Wieczorek, Michal; Tcherkezian, Joseph; Bernier, Cynthia; Prota, Andrea E.; Chaaban, Sami; Rolland, Yannève; Godbout, Claude; Hancock, Mark A.; Arezzo, Joseph C.; Ocal, Ozhan; Rocha, Cecilia; Olieric, Natacha; Hall, Anita; Ding, Hui; Bramoullé, Alexandre; Annis, Matthew G.; Zogopoulos, George; Harran, Patrick G.; Wilkie, Thomas M.; Brekken, Rolf A.; Siegel, Peter M.; Steinmetz, Michel O.; Shore, Gordon C.; Brouhard, Gary J.; Roulston, Anne

2017-01-01

Microtubule-targeting agents (MTAs) are widely used anticancer agents, but toxicities such as neuropathy limit their clinical use. MTAs bind to and alter the stability of microtubules, causing cell death in mitosis. We describe DZ-2384, a preclinical compound that exhibits potent antitumor activity in models of multiple cancer types. It has an unusually high safety margin and lacks neurotoxicity in rats at effective plasma concentrations. DZ-2384 binds the vinca domain of tubulin in a distinct way, imparting structurally and functionally different effects on microtubule dynamics compared to other vinca-binding compounds. X-ray crystallography and electron microscopy studies demonstrate that DZ-2384 causes straightening of curved protofilaments, an effect proposed to favor polymerization of tubulin. Both DZ-2384 and the vinca alkaloid vinorelbine inhibit microtubule growth rate; however, DZ-2384 increases the rescue frequency and preserves the microtubule network in nonmitotic cells and in primary neurons. This differential modulation of tubulin results in a potent MTA therapeutic with enhanced safety. PMID:27856798

First results on the crustal structure of the Natal Valley from combined wide-angle and reflection seismic data (MOZ3/5 cruise), South Mozambique Margin.

NASA Astrophysics Data System (ADS)

Leprêtre, Angélique; Verrier, Fanny; Evain, Mikael; Schnurle, Philippe; Watremez, Louise; Aslanian, Daniel; de Clarens, Philippe; Dias, Nuno; Afilhado, Alexandra; Leroy, Sylvie; d'Acremont, Elia; Castilla, Raymi; Moulin, Maryline

2017-04-01

The Natal valley (South Mozambique margin) is a key area for the understanding of the SW Indian Ocean history since the Gondwana break-up, and widely, the structure of a margin system at the transition between divergent and strike-slip segments. As one part of the PAMELA project (PAssive Margins Exploration Laboratories), conducted by TOTAL, IFREMER, in collaboration with Université de Bretagne Occidentale, Université Rennes 1, Université Pierre and Marie Curie, CNRS et IFPEN, the Natal Valley and the East Limpopo margin have been explored during the MOZ3/5 cruise (2016), conducted onboard the R/V Pourquoi Pas?, through the acquisition of 7 wide-angle profiles and coincident marine multichannel (720 traces) seismic as well as potential field data. Simultaneously, land seismometers were deployed in the Mozambique coastal plains, extending six of those profiles on land for about 100 km in order to provide information on the onshore-offshore transition. Wide-angle seismic data are of major importance as they can provide constrains on the crustal structure of the margin and the position of the continent-ocean boundary in an area where the crustal nature is poorly known and largely controversial. The aim of this work is to present the first results on the crustal structure from P-waves velocity modeling along two perpendicular MZ1 & MZ7 wide-angle profiles crossing the Natal Valley in an E-W and NNW-SSE direction respectively, which reveal a crust up to 30 km thick below the Natal Valley and thus raises questions of a purely oceanic origin of the Valley. The post-doc of Angélique Leprêtre is co-funded by TOTAL and IFREMER as part of the PAMELA (Passive Margin Exploration Laboratories) scientific project.

Hydrodynamics of isohydric and anisohydric trees: insights from models and measurements

NASA Astrophysics Data System (ADS)

Novick, K. A.; Oishi, A. C.; Roman, D. T.; Benson, M. C.; Miniat, C.

2016-12-01

In an effort to understand and predict the mechanisms that govern tree response to hydrologic stress, plant hydraulic theory, which classifies trees along a continuum of isohydric to anisohydric water use strategies, is increasingly being used. Isohydry maintains relatively constant leaf water potential during periods of water stress, promoting wide hydraulic safety margins that reduce the risk of xylem cavitation. In contrast, anisohydry allows leaf water potential to fall as soil water potential falls, but in doing so trees incur a greater risk of hydraulic failure. As a result, unique patterns of stomatal functioning between isohydric and anisohydric species are both predicted and observed in leaf-, tree-, and stand-level water use. We use a novel model formulation to examine the dynamics of three mechanisms that are potentially limiting to leaf-level gas exchange in trees during drought: (1) a `demand limitation' driven by an assumption of stomatal optimization of water loss and carbon uptake; (2) `hydraulic limitation' of water movement from the roots to the leaves; and (3) `non-stomatal' limitations imposed by declining leaf water status within the leaf. Model results suggest that species-specific `economics' of stomatal behavior may play an important role in differentiating species along the continuum of isohydric to anisohydric behavior; specifically, we show that non-stomatal and demand limitations may reduce stomatal conductance and increase leaf water potential, promoting wide safety margins characteristic of isohydric species. Direct comparisons of modeled and measured stomatal conductance further indicated that non-stomatal and demand limitations reproduced observed patterns of tree water use well for an isohydric species but that a hydraulic limitation likely applies in the case of an anisohydric species. This modeling framework used in concert with climate data may help land managers and scientists predict when and what forest species and communities might undergo drought-related mortality.

The relationship between safety net activities and hospital financial performance

PubMed Central

2010-01-01

Background During the 1990's hospitals in the U.S were faced with cost containment charges, which may have disproportionately impacted hospitals that serve poor patients. The purposes of this paper are to study the impact of safety net activities on total profit margins and operating expenditures, and to trace these relationships over the 1990s for all U.S urban hospitals, controlling for hospital and market characteristics. Methods The primary data source used for this analysis is the Annual Survey of Hospitals from the American Hospital Association and Medicare Hospital Cost Reports for years 1990-1999. Ordinary least square, hospital fixed effects, and two-stage least square analyses were performed for years 1990-1999. Logged total profit margin and operating expenditure were the dependent variables. The safety net activities are the socioeconomic status of the population in the hospital serving area, and Medicaid intensity. In some specifications, we also included uncompensated care burden. Results We found little evidence of negative effects of safety net activities on total margin. However, hospitals serving a low socioeconomic population had lower expenditure raising concerns for the quality of the services provided. Conclusions Despite potentially negative policy and market changes during the 1990s, safety net activities do not appear to have imperiled the survival of hospitals. There may, however, be concerns about the long-term quality of the services for hospitals serving low socioeconomic population. PMID:20074367

Defibrillation threshold testing fails to show clinical benefit during long-term follow-up of patients undergoing cardiac resynchronization therapy defibrillator implantation.

PubMed

Michowitz, Yoav; Lellouche, Nicolas; Contractor, Tahmeed; Bourke, Tara; Wiener, Isaac; Buch, Eric; Boyle, Noel; Bersohn, Malcolm; Shivkumar, Kalyanam

2011-05-01

The utility of defibrillation threshold testing in patients undergoing implantable cardioverter-defibrillator (ICD) implantation is controversial. Higher defibrillation thresholds have been noted in patients undergoing implantation of cardiac resynchronization therapy defibrillators (CRT-D). Since the risks and potential benefits of testing may be higher in this population, we sought to assess the impact of defibrillation safety margin or vulnerability safety margin testing in CRT-D recipients. A total of 256 consecutive subjects who underwent CRT-D implantation between January 2003 and December 2007 were retrospectively reviewed. Subjects were divided into two groups based on whether (n= 204) or not (n= 52) safety margin testing was performed. Patient characteristics, tachyarrhythmia therapies, procedural results, and clinical outcomes were recorded. Baseline characteristics, including heart failure (HF) severity, were comparable between the groups. Four cases of HF exacerbation (2%), including one leading to one death, were recorded in the tested group immediately post-implantation. No complications were observed in the untested group. After a mean follow-up of 32 ± 20 months, the proportion of appropriate shocks in the two groups was similar (31 vs. 25%, P = 0.49). There were three cases of failed appropriate shocks in the tested group, despite adequate safety margins at implantation, whereas no failed shocks were noted in the untested group. Survival was similar in the two groups. Defibrillation efficacy testing during implant of CRT-D was associated with increased morbidity and did not predict the success of future device therapy or improve survival during long-term follow-up.

Manipulation of a fragile object by elderly individuals.

PubMed

Gorniak, Stacey L; Zatsiorsky, Vladimir M; Latash, Mark L

2011-08-01

We investigated strategies of healthy elderly participants (74-84 years old) during prehension and transport of an object with varying degrees of fragility. Fragility was specified as the maximal normal force that the object could withstand without collapsing. Specifically, kinetic and kinematic variables as well as and force covariation indices were quantified and compared to those shown by young healthy persons (19-28 years old). We tested three hypotheses related to age-related changes in two safety margins (slip safety margin and crush safety margin) and indices of force covariation. Compared to young controls, elderly individuals exhibited a decrease in object acceleration and an increase in movement time, an increase in grip force production, a decrease in the correlation between grip and load forces, an overall decrease in indices of multi-digit synergies, and lower safety margin indices computed with respect to both dropping and crushing the object. Elderly participants preferred to be at a relatively lower risk of crushing the object even if this led to a higher risk of dropping it. Both groups showed an increase in the index of synergy stabilizing total normal force produced by the four fingers with increased fragility of the object. Age-related changes are viewed as a direct result of physiological changes due to aging, not adaptation to object fragility. Such changes in overall characteristics of prehension likely reflect diminished synergic control by the central nervous system of finger forces with aging. The findings corroborate an earlier hypothesis on an age-related shift from synergic to element-based control.

Ensuring the validity of calculated subcritical limits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, H.K.

1977-01-01

The care taken at the Savannah River Laboratory and Plant to ensure the validity of calculated subcritical limits is described. Close attention is given to ANSI N16.1-1975, ''Validation of Calculational Methods for Nuclear Criticality Safety.'' The computer codes used for criticality safety computations, which are listed and are briefly described, have been placed in the SRL JOSHUA system to facilitate calculation and to reduce input errors. A driver module, KOKO, simplifies and standardizes input and links the codes together in various ways. For any criticality safety evaluation, correlations of the calculational methods are made with experiment to establish bias. Occasionallymore » subcritical experiments are performed expressly to provide benchmarks. Calculated subcritical limits contain an adequate but not excessive margin to allow for uncertainty in the bias. The final step in any criticality safety evaluation is the writing of a report describing the calculations and justifying the margin.« less

On the required complexity of vehicle dynamic models for use in simulation-based highway design.

PubMed

Brown, Alexander; Brennan, Sean

2014-06-01

This paper presents the results of a comprehensive project whose goal is to identify roadway design practices that maximize the margin of safety between the friction supply and friction demand. This study is motivated by the concern for increased accident rates on curves with steep downgrades, geometries that contain features that interact in all three dimensions - planar curves, grade, and superelevation. This complexity makes the prediction of vehicle skidding quite difficult, particularly for simple simulation models that have historically been used for road geometry design guidance. To obtain estimates of friction margin, this study considers a range of vehicle models, including: a point-mass model used by the American Association of State Highway Transportation Officials (AASHTO) design policy, a steady-state "bicycle model" formulation that considers only per-axle forces, a transient formulation of the bicycle model commonly used in vehicle stability control systems, and finally, a full multi-body simulation (CarSim and TruckSim) regularly used in the automotive industry for high-fidelity vehicle behavior prediction. The presence of skidding--the friction demand exceeding supply--was calculated for each model considering a wide range of vehicles and road situations. The results indicate that the most complicated vehicle models are generally unnecessary for predicting skidding events. However, there are specific maneuvers, namely braking events within lane changes and curves, which consistently predict the worst-case friction margins across all models. This suggests that any vehicle model used for roadway safety analysis should include the effects of combined cornering and braking. The point-mass model typically used by highway design professionals may not be appropriate to predict vehicle behavior on high-speed curves during braking in low-friction situations. However, engineers can use the results of this study to help select the appropriate vehicle dynamic model complexity to use in the highway design process. Copyright © 2014 Elsevier Ltd. All rights reserved.

Pharmacokinetics of Lidocaine and Its Metabolites Following Vaginal Administration of Lidocaine Gel to Healthy Female Subjects

PubMed Central

Kushner, Harvey; Richardson, Elaine; Mize, Amy; Mayer, Philip

2016-01-01

Abstract Lidocaine vaginal bioadhesive gel is being developed as a local anesthetic for use in minimally invasive outpatient gynecological procedures and was investigated in single‐dose and multiple‐dose studies in healthy young adult women. Lidocaine doses of 2.5%, 5%, and 10% (w/w) were administered, and parent drug and metabolites monoethylglycinexylidide and glycinexylidide were measured in plasma. Lidocaine was absorbed through vaginal tissue and into the systemic circulation in a dose‐proportional manner, and there was little systemic accumulation. Plasma concentrations were 10‐ to 20‐fold lower than concentrations obtained after administration of intravenous lidocaine used to treat arrhythmic activity, thus demonstrating a wide safety margin for a vaginal lidocaine product. PMID:27297519

757 Path Loss Measurements

NASA Technical Reports Server (NTRS)

Horton, Kent; Huffman, Mitch; Eppic, Brian; White, Harrison

2005-01-01

Path Loss Measurements were obtained on three (3) GPS equipped 757 aircraft. Systems measured were Marker Beacon, LOC, VOR, VHF (3), Glide Slope, ATC (2), DME (2), TCAS, and GPS. This data will provide the basis for assessing the EMI (Electromagnetic Interference) safety margins of comm/nav (communication and navigation) systems to portable electronic device emissions. These Portable Electronic Devices (PEDs) include all devices operated in or around the aircraft by crews, passengers, servicing personnel, as well as the general public in the airport terminals. EMI assessment capability is an important step in determining if one system-wide PED EMI policy is appropriate. This data may also be used comparatively with theoretical analysis and computer modeling data sponsored by NASA Langley Research Center and others.

Asymmetry and polarity of the South Atlantic conjugated margins related to the presence of cratons: a numerical study

NASA Astrophysics Data System (ADS)

Andrés-Martínez, Miguel; Pérez-Gussinyé, Marta; de Monserrat Navarro, Albert; Morgan, Jason P.

2015-04-01

Tectonic asymmetry of conjugated passive margins, where one margin is much narrower than the conjugate one, is commonly observed at many passive margins world-wide. Conjugate margin asymmetry has been suggested to be a consequence of lateral changes in rheology, composition, temperature gradient or geometries of the crust and lithosphere. Here we use the South Atlantic margins (from Camamu/Gabon to North Santos/South Kwanza) as a natural laboratory to understand conjugate margin asymmetry. Along this margin sector the polarity of the asymmetry changes. To the North, the Brazilian margin developed in the strong Sao Francisco craton, and this constitutes the narrow side of the conjugate pair. To the South, the Brazilian margin developed in the Ribeira fold belt, and the margin is wide. The opposite is true for the African side. We have thus numerically analysed how the relative distance between the initial location of extension and the craton influences the symmetry/asymmetry and polarity of the conjugate margin system. Our numerical model is 2D visco-elasto-plastic and has a free surface, strain weakening and shear heating. The initial set-up includes a cratonic domain, a mobile belt and a transition area between both. We have run tests with different rheologies, thickness of the lithosphere, and weak seeds at different distances from the craton. Results show asymmetric conjugated margins, where the narrower margin is generally the closest to the craton. Our models also allow us to study how the polarity is controlled by the distance between the initial weakness and the craton, and help to understand how the presence of cratonic domains affects the final architecture of the conjugated margins.

Oral Midazolam Sedation For Uncooperative Children In Outpatient Paedodontics: Time For Reappraisal.

PubMed

Kapur, Aditi; Jain, Kajal; Goyal, A; Mahoney, Greg

2016-01-01

Sedation is frequently desired to facilitate dental procedures in uncooperative paediatric patients. Oromucosal Midazolam sedation is a popular choice among paediatric dentists world wide due to its many advantages such as ease of administration, good efficacy, presence of reversal agents and a wide margin of safety. On the other hand, many investigators have reported that midazolam sedation may not be successful for carrying out all types of dental procedures. This may be attributed to diverse nature of various treatment plans coupled with the extent of behavioural changes in the child and operator's experience. Due to the heterogeneity involved in treatment of paediatric dental procedures, the specific indications for oral midazolam use that ensure its success rate, probably need to be defined. This may enable the clinicians to have a convenient and quicker option for managing the cases rather than facing sedation failure or at times, ending up giving general anaesthetics. This article therefore brings forth the possible causes of midazolam sedation failure and proposes a 'case selection criterion'.

Coordination of stem and leaf hydraulic conductance in southern California shrubs: a test of the hydraulic segmentation hypothesis.

PubMed

Pivovaroff, Alexandria L; Sack, Lawren; Santiago, Louis S

2014-08-01

Coordination of water movement among plant organs is important for understanding plant water use strategies. The hydraulic segmentation hypothesis (HSH) proposes that hydraulic conductance in shorter lived, 'expendable' organs such as leaves and longer lived, more 'expensive' organs such as stems may be decoupled, with resistance in leaves acting as a bottleneck or 'safety valve'. We tested the HSH in woody species from a Mediterranean-type ecosystem by measuring leaf hydraulic conductance (Kleaf) and stem hydraulic conductivity (KS). We also investigated whether leaves function as safety valves by relating Kleaf and the hydraulic safety margin (stem water potential minus the water potential at which 50% of conductivity is lost (Ψstem-Ψ50)). We also examined related plant traits including the operating range of water potentials, wood density, leaf mass per area, and leaf area to sapwood area ratio to provide insight into whole-plant water use strategies. For hydrated shoots, Kleaf was negatively correlated with KS , supporting the HSH. Additionally, Kleaf was positively correlated with the hydraulic safety margin and negatively correlated with the leaf area to sapwood area ratio. Consistent with the HSH, our data indicate that leaves may act as control valves for species with high KS , or a low safety margin. This critical role of leaves appears to contribute importantly to plant ecological specialization in a drought-prone environment. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.

Safety assessment of green tea based beverages and dried green tea extracts as nutritional supplements.

PubMed

Dekant, Wolfgang; Fujii, Kenkichi; Shibata, Eiichiro; Morita, Osamu; Shimotoyodome, Akira

2017-08-05

The safety of green tea infusions and green tea extract (GTE)-based products is reviewed regarding catechins. Epigallocatechin 3-gallate (EGCG), the major catechin present in green tea, is suspected of being responsible for liver toxicity reported in humans consuming food supplements. Intake of EGCG with green tea infusions and GTE-based beverages is up to about 450mg EGCG/person/day in Europe and higher in Asia. Consumption of green tea is not associated with liver damage in humans, and green tea infusion and GTE-based beverages are considered safe in the range of historical uses. In animal studies, EGCG's potency for liver effects is highly dependent on conditions of administration. Use of NOAELs from bolus administration to derive a tolerable upper intake level applying the margin of safety concept results in acceptable EGCG-doses lower than those from one cup of green tea. NOAELs from toxicity studies applying EGCG with diet/split of the daily dose are a better point of departure for risk characterization. In clinical intervention studies, liver effects were not observed after intakes below 600mg EGCG/person/day. Thus, a tolerable upper intake level of 300mg EGCG/person/day is proposed for food supplements; this gives a twofold safety margin to clinical studies that did not report liver effects and a margin of safety of 100 to the NOAELs in animal studies with dietary administration of green tea catechins. Copyright © 2017 Elsevier B.V. All rights reserved.

First images of the crustal structure across the central Algerian margin, off Tipaza (West Algiers) from deep penetrating seismic data: new information to constrain the opening of the Algerian basin

NASA Astrophysics Data System (ADS)

Leprêtre, A.; Deverchere, J.; Klingelhoefer, F.; Graindorge, D.; Schnurle, P.; Yelles, K.; Bracene, R.

2011-12-01

The origin of the Algerian margin remains one of the key questions still unresolved in the Western Mediterranean sea. This is related to the unknown nature and kinematics of this Neogene basin. Whereas the westernmost margin is generally assumed to have been shaped as a STEP-fault (Subduction-Transform Edge Propagator, transcurrent) margin by the westward displacement of the Alboran block, the central Algerian margin is believed to have involved a NW-SE basin opening related to a southward slab rollback. This work sheds insight on this issue, using data acquired in the context of the Algerian-French program SPIRAL (Sismique Profonde et Investigation Régionale en Algérie): a cruise conducted on the 'R/V L'Atalante' in October-November 2009. It has provided 5 new combined onshore-offshore wide-angle seismic profiles and an extensive multi-channel seismic dataset spread along the margin, from Oran to Annaba. In this work, the available structural information on the ~N-S wide-angle transect of Tipaza is presented, where the margin broadens due to the presence of a bathymetric high (the Khayr-Al-Din bank) which is assumed to represent a remaining titled block of the passive margin. Along the transect, 39 OBS and 13 landstations recorded 751 low frequency airgun shots. Travel-time tomography and forward modelling were computed using the software developed by Zelt and Barton (1998) and Zelt and Smith (1992), to obtain the velocity structure in the region. A set of multi-channel seismic reflection profiles including two coincident profiles with the wide-angle data allows a combined interpretation and extend the deep structure in the Bou Ismail Bay. MCS data outline the sedimentary sequence filling the Algerian basin depicting an intensive salt tectonic associated with the Messinan Salinity Crisis and allowing to image locally below the salt layer. The deep penetrating data SPIRAL allow to image the sedimentary sequence in the Algerian basin off Tipaza (West Algiers) and the crustal structure at the continent-ocean boundary. In the Algerian basin off Tipaza, the Moho discontinuity is identified using wide-angle modelling at 11-12 km depth which corresponds in two-way travel-time to 7-8 s. Wide-angle seismic modelling imaged a major thinning of the crust from more of 15 km in the upper margin (KADB) to only 5-6 km in the deep basin. This thinning also marks the rapid transition from a thinned continental crust at the Khayr-al-Din bank to an oceanic crust in the Algerian Basin, revealing a narrow transition zone (20-30 km) between the two domains. This work presents the deep structure of the margin West of Algiers from wide-angle and multichannel seismic data in order to discuss models of opening for the Algerian basin.

2015 Accomplishments Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This report covers selected highlights from the four research pathways in the LWRS Program: Materials Aging and Degradation; Risk-Informed Safety Margin Characterization; Advanced Instrumentation, Information, and Control Systems Technologies; and Reactor Safety Technologies, as well as a look-ahead at planned activities for 2017.

2016 Accomplishments Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This report covers selected highlights from the four research pathways in the LWRS Program: Materials Aging and Degradation; Risk-Informed Safety Margin Characterization; Advanced Instrumentation, Information, and Control Systems Technologies; and Reactor Safety Technologies, as well as a look-ahead at planned activities for 2017.

77 FR 69507 - Proposed Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

..., ``Revise Shutdown Margin Definition To Address Advanced Fuel Designs'' AGENCY: Nuclear Regulatory... Shutdown Margin Definition to Address Advanced Fuel Designs.'' DATES: Comment period expires on December 19... address newer BWR fuel designs, which may be more reactive at shutdown temperatures above 68[emsp14][deg]F...

Lung segment geometry study: simulation of largest possible tumours that fit into bronchopulmonary segments.

PubMed

Welter, S; Stöcker, C; Dicken, V; Kühl, H; Krass, S; Stamatis, G

2012-03-01

Segmental resection in stage I non-small cell lung cancer (NSCLC) has been well described and is considered to have similar survival rates as lobectomy but with increased rates of local tumour recurrence due to inadequate parenchymal margins. In consequence, today segmentectomy is only performed when the tumour is smaller than 2 cm. Three-dimensional reconstructions from 11 thin-slice CT scans of bronchopulmonary segments were generated, and virtual spherical tumours were placed over the segments, respecting all segmental borders. As a next step, virtual parenchymal safety margins of 2 cm and 3 cm were subtracted and the size of the remaining tumour calculated. The maximum tumour diameters with a 30-mm parenchymal safety margin ranged from 26.1 mm in right-sided segments 7 + 8 to 59.8 mm in the left apical segments 1-3. Using a three-dimensional reconstruction of lung CT scans, we demonstrated that segmentectomy or resection of segmental groups should be feasible with adequate margins, even for larger tumours in selected cases. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Incidence of ineffective safety margin testing (<10 J) and efficacy of routine subcutaneous array insertion during implantable cardioverter defibrillator implantation.

PubMed

Ohlow, Marc-Alexander; Roos, Marcus; Lauer, Bernward; Geller, J Christoph

2016-01-01

The purpose of this study was to assess (1) the incidence of safety margin testing <10 J (SMT) and (2) the efficacy/safety of routinely adding a subcutaneous array (SQA) (Medtronic 6996SQ) for these patients. Patients with SMT smaller than a 10-J safety margin from maximum output were considered to have very high readings and underwent SQA insertion. These patients were compared with the rest of the patients who had acceptable SMT (≥10 J). A total of 616 patients underwent ICD implantation during the analysis period. Of those, 16 (2.6%) had SMT <10 J. By univariate analysis, younger age, and non-ischemic cardiomyopathy, were all significant predictors of SMT <10 J (p < 0.05). In all 16 cases, other methods to improve SMT prior to array insertion were attempted but failed for all patients: reversing shock polarity (n = 15), removing the superior vena cava coil (n = 14), reprogramming shock waveform (n = 9), and repositioning right ventricular lead (n = 9). Addition of the SQA successfully increased SMT to within safety margin for all patients (32 ± 2 versus 21 ± 3 J; p < 0.001). Follow-up (mean 48.1 ± 21 months) was available for all patients with SQA, only 2 cases with inappropriate shocks due to atrial fibrillation had to be noted. None of the patients experienced complications due to SQA implantation. SMT <10 J occur in about 2.6% of patients undergoing ICD implantation. SQA insertion corrects this problem without procedural/mid-term complications. Copyright © 2016 Indian Heart Rhythm Society. Production and hosting by Elsevier B.V. All rights reserved.

Safety of fenbendazole in Chinese ring-necked pheasants (Phasianus colchicus).

PubMed

Griffith, R; Yaeger, M; Hostetter, S; Tell, L A; Wetzlich, S; Vickroy, T; Lillie, B; MacFarlane, W; Laudenslager, T; Whitley, E; Dzikamunhenga, R; Larson, W

2014-03-01

Ring-necked pheasants raised on propagation farms can be severely parasitized with Syngamus trachea (gapeworm) and other parasitic worms. Fenbendazole is a highly effective benzimidazole-class anthelmintic that is not currently approved for game bird species in the United States. The objective of this work was to provide target animal safety data to support a label claim for fenbendazole in pheasants at 100 parts per million (ppm) in the feed for 7 consecutive days. Demonstration of safety in young pheasants and a separate demonstration of reproductive safety in adult birds were required. In the young bird study, 160 Chinese ring-necked pheasants (Phasianus colchicus, 80 males and 80 females) were fed a commercial game bird starter ration containing no antibiotics, growth promoters, or coccidiostats until day 0 of the study (approximately 21 days of age). On day 0 the birds were placed on their respective study diets containing fenbendazole at 0, 100, 300, and 500 ppm for 21 days (three times the normal treatment duration). Clinical observations were recorded twice daily. Feed consumption, feed conversion rate, and body weights were determined for each pen. Three birds from each pen were randomly selected for necropsy, histopathology, and clinical pathology. Birds were carefully examined for feathering abnormalities immediately following euthanasia. The remaining birds in each pen were submitted for drug concentration analysis so that concentrations (for low vs. high treatment levels) could be correlated with clinical observations, clinical pathology, and histologic findings. There no morbidities or mortalities after study day--1. There were no statistically significant treatment-related differences in feed consumption, feed conversion rates, body weights, serum biochemistry profiles, hematologic profiles, gross necropsy findings, histopathologic examination, and feathering. Allowable liver and muscle concentrations of fenbendazole sulfone in turkeys are 6 and 2 ppm, respectively, with a 6-hr feed withdrawal. Analysis of fenbendazole concentrations in kidney, liver, leg/thigh, and breast muscle and skin with associated fat revealed that, even at the highest dose level used and with no feed withdrawal, fenbendazole concentrations were relatively low in these tissues. These findings indicate that fenbendazole has a relatively wide margin of safety in young pheasants and that the proposed dose of 100 ppm in the feed for 7 consecutive days is well within the margin of safety. In the reproductive safety study, two large game bird farms fed fendbendazole at 100 ppm for 7 days and collected data on hatching percentage of pheasant eggs before and after treatment. Reproductive performance in hen pheasants was not adversely affected.

Favourable results of Mohs micrographic surgery for basal cell carcinoma.

PubMed

Gniadecki, Robert; Glud, Martin; Mortensen, Kia; Bang, Bo; Biskup, Edyta; Omland, Silje Haukali

2015-12-01

Basal cell carcinoma (BCC) is the most common malignant neoplasm with an annual incidence approaching 200/100,000 person-years. Mohs micrographic surgery (MMS) is widely used in North America and in Europe for treatment of BCC. This technique ensures radical tumour removal, sparing of the surrounding healthy skin, and it also offers higher cure rates than standard tumour excision with a predefined margin of healthy skin. The superiority of MMS relies on the fact that the entire (100%) margin of the excised tissue is examined microscopically for residual tumour in contrast to the traditional histopathological examination, in which 2% of the margin is examined. In Denmark, MMS was first introduced by us in 2012. In the present study, we retrospectively included all patients who underwent MMS from May 2012 to June 2015. A total of 231 patients with 263 BCC were included. The mean age was 66.1 years. The most common localisations were the forehead (31.3%), the nose (31.0%) and the cheek (14.7%). Primary BCC comprised 54.0%; the remaining cases were relapses, most frequently after curettage (36.9%), radiotherapy (18.9%) and photodynamic therapy (11.7%). MMS leads to 40% smaller skin defects than standard excisions with 4 or 6 mm margins. Closure of skin defects was achieved by side-to-side closure in 49% and by local flaps in 40%. There were no relapses during the observation time. The safety, cosmetic and functional outcome were excellent. We recommend that MMS be included in the Danish BCC treatment guidelines, especially for high-risk BCC in the face, in line with standard practice in Europe and the United States. none. not relevant.

Integral throat entrance development, qualification and production for the Antares 3 nozzle

NASA Technical Reports Server (NTRS)

Clayton, F. I.; Dirling, R. B.; Eitman, D. A.; Loomis, W. C.

1982-01-01

Although design analyses of a G-90 graphite integral throat entrance for the Antares 3 solid rocket motor nozzle indicated acceptable margins of safety, the nozzle throat insert suffered a thermostructural failure during the first development firing. Subsequent re-analysis using properties measured on material from the same billet as the nozzle throat insert showed negative margins. Carbon-carbon was investigated and found to result in large positive margins of safety. The G-90 graphite was replaced by SAI fast processed 4-D material which uses Hercules HM 10000 fiber as the reinforcement. Its construction allows powder filling of the interstices after preform fabrication which accelerates the densification process. Allied 15V coal tar pitch is then used to complete densification. The properties were extensively characterized on this material and six nozzles were subjected to demonstration, development and qualification firings.

Safety margins in zircaloy oxidation and embrittlement criteria for emergency core cooling system acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williford, R.E.

1986-09-01

Current emergency core cooling system acceptance criteria for light water reactors specify that, under loss-of-coolant accident (LOCA) conditions, the Baker-Just (BJ) correlation must be used to calculate Zircaloy-steam oxidation, calculated peak cladding temperatures (PCT) must not exceed 1204/sup 0/C, and calculated oxidation must not exceed 17% equivalent cladding reacted (ECR). An appropriately defined minimum margin of safety was estimated for each of these criteria. The currently required BJ oxidation correlation provides margins only over the 1100 to 1500/sup 0/C temperature range at the 95% confidence level. The PCT margins for thermal shock and handling failures are adequate at oxidation temperaturesmore » above 1204/sup 0/C for up to 210 and 160 s, respectively, at the 95% confidence level. The ECR thermal shock and handling margins at the 50 and 95% confidence levels, respectively, range between 2 and 7% ECR for the BJ correlation, but vanish at temperatures above 1100 to 1160/sup 0/C for the best-estimate Cathcart-Pawel correlation. However, use of the Cathcart Pawel correlation for ''design basis'' LOCA calculations can be justified at the 85 to 88% confidence level if cooling rate effects can be neglected.« less

Endoscopic submucosal dissection for superficial esophageal neoplasms using the stag beetle knife.

PubMed

Fujinami, H; Hosokawa, A; Ogawa, K; Nishikawa, J; Kajiura, S; Ando, T; Ueda, A; Yoshita, H; Sugiyama, T

2014-01-01

Endoscopic submucosal dissection (ESD) is an accepted standard treatment for early gastric cancer but is not widely used in the esophagus because of technical difficulties. To increase the safety of esophageal ESD, we used a scissors-type device called the stag beetle (SB) knife. The aim of this study was to determine the efficacy and safety of ESD using the SB knife. We performed a single-center retrospective, uncontrolled trial. A total of 38 lesions were excised by ESD from 35 consecutive patients who were retrospectively divided into the following two groups according to the type of knife used to perform ESD: the hook knife (hook group) was used in 20 patients (21 lesions), and the SB knife (SB group) was used in 15 patients (17 lesions). We evaluated and compared the operative time, lesion size, en bloc resection rate, pathological margins free rate, and complication rate in both groups. The operative time was shorter in the SB group (median 70.0 minutes [interquartile range, 47.5-87.0]) than in the hook group (92.0 minutes [interquartile range, 63.0-114.0]) (P = 0.019), and the rate of complications in the SB group was 0% compared with 45.0% in the hook group (P = 0.004). However, the lesion size, en bloc resection rate, and pathological margins free rate did not differ significantly between the two groups. In conclusion, ESD using the SB knife was safer than that using a conventional knife for superficial esophageal neoplasms. © 2013 Wiley Periodicals, Inc. and the International Society for Diseases of the Esophagus.

Radiotherapy beyond cancer: Target localization in real-time MRI and treatment planning for cardiac radiosurgery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ipsen, S.; Blanck, O.; Rades, D.

2014-12-15

Purpose: Atrial fibrillation (AFib) is the most common cardiac arrhythmia that affects millions of patients world-wide. AFib is usually treated with minimally invasive, time consuming catheter ablation techniques. While recently noninvasive radiosurgery to the pulmonary vein antrum (PVA) in the left atrium has been proposed for AFib treatment, precise target location during treatment is challenging due to complex respiratory and cardiac motion. A MRI linear accelerator (MRI-Linac) could solve the problems of motion tracking and compensation using real-time image guidance. In this study, the authors quantified target motion ranges on cardiac magnetic resonance imaging (MRI) and analyzed the dosimetric benefitsmore » of margin reduction assuming real-time motion compensation was applied. Methods: For the imaging study, six human subjects underwent real-time cardiac MRI under free breathing. The target motion was analyzed retrospectively using a template matching algorithm. The planning study was conducted on a CT of an AFib patient with a centrally located esophagus undergoing catheter ablation, representing an ideal case for cardiac radiosurgery. The target definition was similar to the ablation lesions at the PVA created during catheter treatment. Safety margins of 0 mm (perfect tracking) to 8 mm (untracked respiratory motion) were added to the target, defining the planning target volume (PTV). For each margin, a 30 Gy single fraction IMRT plan was generated. Additionally, the influence of 1 and 3 T magnetic fields on the treatment beam delivery was simulated using Monte Carlo calculations to determine the dosimetric impact of MRI guidance for two different Linac positions. Results: Real-time cardiac MRI showed mean respiratory target motion of 10.2 mm (superior–inferior), 2.4 mm (anterior–posterior), and 2 mm (left–right). The planning study showed that increasing safety margins to encompass untracked respiratory motion leads to overlapping structures even in the ideal scenario, compromising either normal tissue dose constraints or PTV coverage. The magnetic field caused a slight increase in the PTV dose with the in-line MRI-Linac configuration. Conclusions: The authors’ results indicate that real-time tracking and motion compensation are mandatory for cardiac radiosurgery and MRI-guidance is feasible, opening the possibility of treating cardiac arrhythmia patients completely noninvasively.« less

Influence of Passive Stiffness of Hamstrings on Postural Stability

PubMed Central

Kuszewski, Michał; Gnat, Rafał; Sobota, Grzegorz; Myśliwiec, Andrzej

2015-01-01

The aim of the study was to explore whether passive stiffness of the hamstrings influences the strategy of maintaining postural stability. A sample of 50 subjects was selected; the final analyses were based on data of 41 individuals (33 men, 8 women) aged 21 to 29 (mean = 23.3, SD = 1.1) years. A quasi- experimental ex post facto design with repeated measures was used. Categories of independent variables were obtained directly prior to the measurement of the dependent variables. In stage one of the study, passive knee extension was measured in the supine position to assess hamstring stiffness. In stage two, the magnitude of postural sway in antero-posterior direction was measured, while varying the body position on a stabilometric platform, both with and without visual control. The margin of safety was used as a measure of postural control. The magnitude of the margin of safety increased significantly between the open-eye and closed-eye trials. However, although we registered a visible tendency for a larger increase of the margin of safety associated with lower levels of passive hamstrings stiffness, no significant differences were found. Therefore, this study demonstrated that hamstring stiffness did not influence the strategy used to maintain postural stability. PMID:25964809

Influence of passive stiffness of hamstrings on postural stability.

PubMed

Kuszewski, Michał; Gnat, Rafał; Sobota, Grzegorz; Myśliwiec, Andrzej

2015-03-29

The aim of the study was to explore whether passive stiffness of the hamstrings influences the strategy of maintaining postural stability. A sample of 50 subjects was selected; the final analyses were based on data of 41 individuals (33 men, 8 women) aged 21 to 29 (mean = 23.3, SD = 1.1) years. A quasi- experimental ex post facto design with repeated measures was used. Categories of independent variables were obtained directly prior to the measurement of the dependent variables. In stage one of the study, passive knee extension was measured in the supine position to assess hamstring stiffness. In stage two, the magnitude of postural sway in antero-posterior direction was measured, while varying the body position on a stabilometric platform, both with and without visual control. The margin of safety was used as a measure of postural control. The magnitude of the margin of safety increased significantly between the open-eye and closed-eye trials. However, although we registered a visible tendency for a larger increase of the margin of safety associated with lower levels of passive hamstrings stiffness, no significant differences were found. Therefore, this study demonstrated that hamstring stiffness did not influence the strategy used to maintain postural stability.

An empirical assessment of driver motivation and emotional states in perceived safety margins under varied driving conditions.

PubMed

Zhang, Yu; Kaber, David B

2013-01-01

Motivation models in driving behaviour postulate that driver motives and emotional states dictate risk tolerance under various traffic conditions. The present study used time and driver performance-based payment systems to manipulate motivation and risk-taking behaviour. Ten participants drove to a predefined location in a simulated driving environment. Traffic patterns (density and velocity) were manipulated to cause driver behaviour adjustments due to the need to conform with the social norms of the roadway. The driving environment complexity was investigated as a mediating factor in risk tolerance. Results revealed the performance-based payment system to closely relate to risk-taking behaviour as compared with the time-based payment system. Drivers conformed with social norms associated with specific traffic patterns. Higher roadway complexity led to a more conservative safety margins and speeds. This research contributes to the further development of motivational models of driver behaviour. This study provides empirical justification for two motivation factors in driver risk-taking decisions, including compliance with social norm and emotions triggered by incentives. Environment complexity was identified as a mediating factor in motivational behaviour model. This study also recommended safety margin measures sensitive to changes in driver risk tolerance.

Talonavicular joint arthroscopic portals: A cadaveric study of feasibility and safety.

PubMed

Xavier, Gabriel; Oliva, Xavier Martin; Rotinen, Mauri; Monzo, Mariano

2016-09-01

The objectives of the study were to evaluate the safety of hypothetical arthroscopic portals from talonavicular joint and to evaluate their reproducibility and enforceability. 19 cadaveric feet were marked and four arthroscopic portals were made (medial, dorsomedial, dorsolateral and lateral). The specimens were dissected in layers and the distances between neurovascular structures and the trocars were measured. Medial and dorsomedial portals were in average 8.3 and 8.7, respectively, to the saphenous vein and nerve. Dorsolateral portal was in average 8.1mm to the deep peroneal nerve and dorsalis pedis artery, and 9.1mm to the medial dorsal cutaneous branch of the superficial peroneal nerve. Lateral portal was in average 12.3mm to the intermediate dorsal cutaneous branch of the superficial peroneal nerve. Tested portals shown to have a good safety margin for the foot neurovascular deep dorsal structures and an acceptable safety margin for the superficial neurovascular structures. Copyright © 2015 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

Exploring the Subtleties of Inverse Probability Weighting and Marginal Structural Models.

PubMed

Breskin, Alexander; Cole, Stephen R; Westreich, Daniel

2018-05-01

Since being introduced to epidemiology in 2000, marginal structural models have become a commonly used method for causal inference in a wide range of epidemiologic settings. In this brief report, we aim to explore three subtleties of marginal structural models. First, we distinguish marginal structural models from the inverse probability weighting estimator, and we emphasize that marginal structural models are not only for longitudinal exposures. Second, we explore the meaning of the word "marginal" in "marginal structural model." Finally, we show that the specification of a marginal structural model can have important implications for the interpretation of its parameters. Each of these concepts have important implications for the use and understanding of marginal structural models, and thus providing detailed explanations of them may lead to better practices for the field of epidemiology.

Assessment of safety margins in zircaloy oxidation and embrittlement criteria for ECCS acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williford, R.E.

1986-04-01

Current Emergency Core Cooling System (ECCS) Acceptance Criteria for light-water reactors include certain requirements pertaining to calculations of core performance during a Loss of Coolant Accident (LOCA). The Baker-Just correlation must be used to calculate Zircaloy-steam oxidation, calculated peak cladding temperatures (PCT) must not exceed 1204/sup 0/C, and calculated oxidation must not exceed 17% equivalent cladding reacted (17% ECR). The minimum margin of safety was estimated for each of these criteria, based on research performed in the last decade. Margins were defined as the amounts of conservatism over and above the expected extreme values computed from the data base atmore » specified confidence levels. The currently required Baker-Just oxidation correlation provides margins only over the 1100/sup 0/C to 1500/sup 0/C temperature range at the 95% confidence level. The PCT margins for thermal shock and handling failures are adequate at oxidation temperatures above 1204/sup 0/C for 210 and 160 seconds, respectively, at the 95% confidence level. ECR thermal shock and handling margins at the 50% and 95% confidence levels, respectively, range between 2% and 7% ECR for the Baker-Just correlation, but vanish at temperatures between 1100/sup 0/C and 1160/sup 0/C for the best-estimate Cathcart-Pawel correlation. Use of the Cathcart-Pawel correlation for LOCA calculations can be justified at the 85% to 88% confidence level if cooling rate effects can be neglected. 75 refs., 21 figs.« less

INTEGRATION OF RELIABILITY WITH MECHANISTIC THERMALHYDRAULICS: REPORT ON APPROACH AND TEST PROBLEM RESULTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. S. Schroeder; R. W. Youngblood

The Risk-Informed Safety Margin Characterization (RISMC) pathway of the Light Water Reactor Sustainability Program is developing simulation-based methods and tools for analyzing safety margin from a modern perspective. [1] There are multiple definitions of 'margin.' One class of definitions defines margin in terms of the distance between a point estimate of a given performance parameter (such as peak clad temperature), and a point-value acceptance criterion defined for that parameter (such as 2200 F). The present perspective on margin is that it relates to the probability of failure, and not just the distance between a nominal operating point and a criterion.more » In this work, margin is characterized through a probabilistic analysis of the 'loads' imposed on systems, structures, and components, and their 'capacity' to resist those loads without failing. Given the probabilistic load and capacity spectra, one can assess the probability that load exceeds capacity, leading to component failure. Within the project, we refer to a plot of these probabilistic spectra as 'the logo.' Refer to Figure 1 for a notional illustration. The implications of referring to 'the logo' are (1) RISMC is focused on being able to analyze loads and spectra probabilistically, and (2) calling it 'the logo' tacitly acknowledges that it is a highly simplified picture: meaningful analysis of a given component failure mode may require development of probabilistic spectra for multiple physical parameters, and in many practical cases, 'load' and 'capacity' will not vary independently.« less

An emerging evidence base for the management of neonatal hypoglycaemia.

PubMed

Harding, Jane E; Harris, Deborah L; Hegarty, Joanne E; Alsweiler, Jane M; McKinlay, Christopher Jd

2017-01-01

Neonatal hypoglycaemia is common, and screening and treatment of babies considered at risk is widespread, despite there being little reliable evidence upon which to base management decisions. Although there is now evidence about which babies are at greatest risk, the threshold for diagnosis, best approach to treatment and later outcomes all remain uncertain. Recent studies suggest that treatment with dextrose gel is safe and effective and may help support breast feeding. Thresholds for intervention require a wide margin of safety in light of information that babies with glycaemic instability and with low glucose concentrations may be associated with a higher risk of later higher order cognitive and learning problems. Randomised trials are urgently needed to inform optimal thresholds for intervention and appropriate treatment strategies. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

An Emerging Evidence Base for the Management of Neonatal Hypoglycaemia

PubMed Central

Harding, Jane E; Harris, Deborah L; Hegarty, Joanne E; Alsweiler, Jane M; McKinlay, Christopher JD

2016-01-01

Neonatal hypoglycaemia is common, and screening and treatment of babies considered at risk is widespread, despite there being little reliable evidence upon which to base management decisions. Although there is now evidence about which babies are at greatest risk, the threshold for diagnosis, best approach to treatment and later outcomes all remain uncertain. Recent studies suggest that treatment with dextrose gel is safe and effective and may help support breast feeding. Thresholds for intervention require a wide margin of safety in light of information that babies with glycaemic instability and with low glucose concentrations may be associated with a higher risk of later higher order cognitive and learning problems. Randomised trials are urgently needed to inform optimal thresholds for intervention and appropriate treatment strategies. PMID:27989586

Booster Main Engine Selection Criteria for the Liquid Fly-Back Booster

NASA Technical Reports Server (NTRS)

Ryan, Richard M.; Rothschild, William J.; Christensen, David L.

1998-01-01

The Liquid Fly-Back Booster (LFBB) Program seeks to enhance the Space Shuttle system safety performance and economy of operations through the use of an advanced, liquid propellant Booster Main Engine (BME). There are several viable BME candidates that could be suitable for this application. The objective of this study was to identify the key criteria to be applied in selecting among these BME candidates. This study involved an assessment of influences on the overall LFBB utility due to variations in the candidate rocket engines' characteristics. This includes BME impacts on vehicle system weight, perfortnance,design approaches, abort modes, margins of safety, engine-out operations, and maintenance and support concepts. Systems engineering analyses and trade studies were performed to identify the LFBB system level sensitivities to a wide variety of BME related parameters. This presentation summarizes these trade studies and the resulting findings of the LFBB design teams regarding the BME characteristics that most significantly affect the LFBB system. The resulting BME choice should offer the best combination of reliability, performance, reusability, robustness, cost, and risk for the LFBB program.

Booster Main Engine Selection Criteria for the Liquid Fly-Back Booster

NASA Technical Reports Server (NTRS)

Ryan, Richard M.; Rothschild, William J.; Christensen, David L.

1998-01-01

The Liquid Fly-Back Booster (LFBB) Program seeks to enhance the Space Shuttle system safety, performance and economy of operations through the use of an advanced, liquid propellant Booster Main Engine (BME). There are several viable BME candidates that could be suitable for this application. The objective of this study was to identify the key Criteria to be applied in selecting among these BME candidates. This study involved an assessment of influences on the overall LFBB utility due to variations in the candidate rocket-engines characteristics. This includes BME impacts on vehicle system weight, performance, design approaches, abort modes, margins of safety, engine-out operations, and maintenance and support concepts. Systems engineering analyses and trade studies were performed to identify the LFBB system level sensitivities to a wide variety of BME related parameters. This presentation summarizes these trade studies and the resulting findings of the LFBB design teams regarding the BME characteristics that most significantly affect the LFBB system. The resulting BME choice should offer the best combination of reliability, performance, reusability, robustness, cost, and risk for the LFBB program.

Crustal structure and inferred extension mode in the northern margin of the South China Sea

NASA Astrophysics Data System (ADS)

Gao, J.; Wu, S.; McIntosh, K. D.; Mi, L.; Spence, G.

2016-12-01

Combining multi-channel seismic reflection and satellite gravity data, this study has investigated the crustal structure and magmatic activities of the northern South China Sea (SCS) margin. Results show that a broad continent-ocean transition zone (COT) with more than 140 km wide is characterized by extensive igneous intrusion/extrusion and hyper-extended continental crust in the northeastern SCS margin, a broader COT with 220-265 km wide is characterized by crustal thinning, rift depression, structural highs with igneous rock and perhaps a volcanic zone or a zone of tilted fault blocks at the distal edge in the mid-northern SCS margin, and a narrow COT with 65 km wide bounded seawards by a volcanic buried seamount is characterized by extremely hyper-extended continental crust in the northwestern SCS margin, where the remnant crust with less than 3 km thick is bounded by basin-bounding faults corresponding to an aborted rift below the Xisha Trough with a sub-parallel fossil ridge in the adjacent Northwest Sub-basin. Results from gravity modeling and seismic refraction data show that a high velocity layer (HVL) is present in the outer shelf and slope below extended continental crust in the eastern portion of the northern SCS margin and is thickest (up to 10 km) in the Dongsha Uplift where the HVL gradually thins to east and west below the lower slope and finally terminates at the Manila Trench and Baiyun sag of the Pearl River Mouth Basin. The magmatic intrusions/extrusions and HVL may be related to partial melting caused by decompression of passive, upwelling asthenosphere which resulted primarily in post-rifting underplating and magmatic emplacement or modification of the crust. The northern SCS margin is closer to those of the magma-poor margins than those of volcanic margins, but the aborted rift near the northwestern continental margin shows that there may be no obvious detachment fault like that in the Iberia-Newfoundland type margin. The symmetric aborted rift, broad hyper-extended continental crust, locally distributed HVL, and hotter mantle materials indicate that continental crust underwent stretching phase (pure-shear deformation), thinning phase and breakup followed by onset of seafloor spreading and the mantle-lithosphere may break up before crustal-necking in the northern South China Sea margin.

Geophysical evidence for a transform margin in Northwestern Algeria: possible vestige of a Subduction-Transform Edge Propagator

NASA Astrophysics Data System (ADS)

Badji, R.; Charvis, P.; Bracene, R.; Galve, A.; Badsi, M.; Ribodetti, A.; Benaissa, Z.; Klingelhoefer, F.; Medaouri, M.; Beslier, M.

2013-12-01

This work is part of the Algerian-French SPIRAL program (Sismique Profonde et Investigation Régionale du Nord de l'Algérie) which provides unprecedented images of the deep structure of the western Algerian Margin based on several wide-angle and multichannel seismic data shot across the Algerian Margin. One of the different hypotheses for the opening of the western Mediterranean Sea, we are testing is that the western part of the Algerian margin was possibly part of the southern edge of the Alboran continental block during its westward migration related to the rollback of the Betic-Rif-Alboran subduction zone. A tomographic inversion of the first arrival traveltimes along a 100-km long wide-angle seismic profile shot over 40 Ocean Bottom Seismometers, across the Margin offshore Mostaganem (Northwestern Algerian Margin) was conducted. The final model reveals striking feature in the deep structure of the margin from north to south: 1- the oceanic crust is as thin as 4-km, with velocities ranging from 5.0 to 7.1 km/s, covered by a 3.3 km thick sedimentary pile (seismic velocities from 1.5 to 5.0 km/s) characterized by an intense diapiric activity of the Messinian salt layer. 2- a sharp transition zone, less than 10 km wide, with seismic velocities intermediate between oceanic seismic velocities (observed northward) and continental seismic velocities (observed southward). This zone coincides with narrow and elongated pull apart basins imaged by multichannel seismic data. No evidence of volcanism nor of exhumed serpentinized upper mantle as described along many extensional continental margins are observed along this segment of the margin. 3- a thinned continental crust coincident with a rapid variation of the Moho depth imaged from 12 to ~20 km with a dip up to 50%. The seafloor bathymetry is showing a steep continental slope (>20%). Either normal or inverse faults are observed along MCS lines shot in the dip direction but they do not present large vertical displacement and could be related primarily to strike slip motion. These results support the hypothesis, that the margin offshore Mostaganem is not an extensional margin but rather a transform margin. There is little evidence of tectonic inversion as described eastward along the Kabylian Margin. Possibly strike slip motion affected the thinned continental crust and the transition zone suggesting that this margin is a vestige of the Subduction-Transform Edge Propagator (STEP) related to the westward migration of the Alboran block.

Society of Surgical Oncology–American Society for Radiation Oncology Consensus Guideline on Margins for Breast-Conserving Surgery With Whole-Breast Irradiation in Stages I and II Invasive Breast Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moran, Meena S.; Schnitt, Stuart J.; Giuliano, Armando E.

Purpose: To convene a multidisciplinary panel of breast experts to examine the relationship between margin width and ipsilateral breast tumor recurrence (IBTR) and develop a guideline for defining adequate margins in the setting of breast conserving surgery and adjuvant radiation therapy. Methods and Materials: A multidisciplinary consensus panel used a meta-analysis of margin width and IBTR from a systematic review of 33 studies including 28,162 patients as the primary evidence base for consensus. Results: Positive margins (ink on invasive carcinoma or ductal carcinoma in situ) are associated with a 2-fold increase in the risk of IBTR compared with negative margins.more » This increased risk is not mitigated by favorable biology, endocrine therapy, or a radiation boost. More widely clear margins than no ink on tumor do not significantly decrease the rate of IBTR compared with no ink on tumor. There is no evidence that more widely clear margins reduce IBTR for young patients or for those with unfavorable biology, lobular cancers, or cancers with an extensive intraductal component. Conclusions: The use of no ink on tumor as the standard for an adequate margin in invasive cancer in the era of multidisciplinary therapy is associated with low rates of IBTR and has the potential to decrease re-excision rates, improve cosmetic outcomes, and decrease health care costs.« less

Submarine slumps, slides, and flows dominate sculpting of Beringian Margin, Alaska

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, P.R.; Karl, H.A.; Edwards, B.D.

1990-06-01

The 1,400 km long Beringian margin is characterized by several very large submarine canyons and by a large oceanic plateau at the southern end. GLORIA sidescan-sonar imagery provides a perspective of this margin that is unattainable with conventional acoustic profiles. The broad coverage of GLORIA images emphasizes that, of all the sedimentary processes affecting this vast margin, mass movement is clearly the dominant shaping process. Styles of failure include mud and debris flows, slumps, and massive block slides, some covering areas greater than 1,500 km{sup 2}. GLORIA imagery and seismic-reflection profiles show evidence for a wide variety of slides andmore » slumps in the canyons of the northern margin, Navarin and Pervenets. The 100 km long shelf edge between these two canyons is characterized by a series of scalloped slide scars and incipient scars associated with blocks of sedimentary material, 1 to 2 km across. One of the largest single slide masses is a huge block tens of kilometers wide that occurs on the rise in the central part of the margin beyond the mouth of Zhemchug Canyon. Sliding of this block may have initiated the incision of the world's largest submarine canyon. The removal of this block accelerated headward erosion by retrograde failure until Zhemchug Canyon was cut back to a fault parallel to the shelf edge. Mass movement along the southern margin is widespread at the edges of Umnak Plateau. One mass failure, well-defined by GLORIA, is about 30 km wide and 55 km long. This and other slides along the plateau are associated with diapiric-like structures, suggesting relatively recent tectonism.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jebsen, Nina L.; Department of Oncology, Haukeland University Hospital, Bergen; Trovik, Clement S.

Purpose: Adjuvant radiotherapy has during the past decades become increasingly used in the treatment of localized soft tissue sarcoma. We evaluated the effect of radiotherapy (RT) on local recurrence rates (LRRs) in Scandinavia between 1986 and 2005. Methods and Materials: A total of 1,093 adult patients with extremity or trunk wall soft tissue sarcoma treated at four Scandinavian sarcoma centers were stratified according to the treatment period (1986-1991, 1992-1997, and 1998-2005). The use of adjuvant RT, quality of the surgical margin, interval between surgery and RT, and LRR were analyzed. The median follow-up was 5 years. Results: The use ofmore » RT (77% treated postoperatively) increased from 28% to 53%, and the 5-year LRR decreased from 27% to 15%. The rate of wide surgical margins did not increase. The risk factors for local recurrence were histologic high-grade malignancy (hazard ratio [HR], 5), an intralesional (HR, 6) or marginal (HR, 3) surgical margin, and no RT (HR, 3). The effect of RT on the LRR was also significant after a wide margin resection and in low-grade malignant tumors. The LRR was the same after preoperative and postoperative RT. The median interval from surgery to the start of RT was 7 weeks, and 98% started RT within 4 months. The LRR was the same in patients who started treatment before and after 7 weeks. Conclusion: The results of our study have shown that adjuvant RT effectively prevents local recurrence in soft tissue sarcoma, irrespective of the tumor depth, malignancy grade, and surgical margin status. The effect was most pronounced in deep-seated, high-grade tumors, even when removed with a wide surgical margin.« less

Lower Crustal Strength Controls on Melting and Serpentinization at Magma-Poor Margins: Potential Implications for the South Atlantic

NASA Astrophysics Data System (ADS)

Ros, Elena; Pérez-Gussinyé, Marta; Araújo, Mario; Thoaldo Romeiro, Marco; Andrés-Martínez, Miguel; Morgan, Jason P.

2017-12-01

Rifted continental margins may present a predominantly magmatic continent-ocean transition (COT), or one characterized by large exposures of serpentinized mantle. In this study we use numerical modeling to show the importance of the lower crustal strength in controlling the amount and onset of melting and serpentinization during rifting. We propose that the relative timing between both events controls the nature of the COT. Numerical experiments for half-extension velocities <=10 mm/yr suggest there is a genetic link between margin tectonic style and COT nature that strongly depends on the lower crustal strength. Our results imply that very slow extension velocities (< 5 mm/yr) and a strong lower crust lead to margins characterized by large oceanward dipping faults, strong syn-rift subsidence and abrupt crustal tapering beneath the continental shelf. These margins can be either narrow symmetric or asymmetric and present a COT with exhumed serpentinized mantle underlain by some magmatic products. In contrast, a weak lower crust promotes margins with a gentle crustal tapering, small faults dipping both ocean- and landward and small syn-rift subsidence. Their COT is predominantly magmatic at any ultra-slow extension velocity and perhaps underlain by some serpentinized mantle. These margins can also be either symmetric or asymmetric. Our models predict that magmatic underplating mostly underlies the wide margin at weak asymmetric conjugates, whereas the wide margin is mainly underlain by serpentinized mantle at strong asymmetric margins. Based on this conceptual template, we propose different natures for the COTs in the South Atlantic.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kristine Barrett; Shannon Bragg-Sitton

The Advanced Light Water Reactor (LWR) Nuclear Fuel Development Research and Development (R&D) Pathway encompasses strategic research focused on improving reactor core economics and safety margins through the development of an advanced fuel cladding system. To achieve significant operating improvements while remaining within safety boundaries, significant steps beyond incremental improvements in the current generation of nuclear fuel are required. Fundamental improvements are required in the areas of nuclear fuel composition, cladding integrity, and the fuel/cladding interaction to allow power uprates and increased fuel burn-up allowance while potentially improving safety margin through the adoption of an “accident tolerant” fuel system thatmore » would offer improved coping time under accident scenarios. With a development time of about 20 – 25 years, advanced fuel designs must be started today and proven in current reactors if future reactor designs are to be able to use them with confidence.« less

A Worst-Case Approach for On-Line Flutter Prediction

NASA Technical Reports Server (NTRS)

Lind, Rick C.; Brenner, Martin J.

1998-01-01

Worst-case flutter margins may be computed for a linear model with respect to a set of uncertainty operators using the structured singular value. This paper considers an on-line implementation to compute these robust margins in a flight test program. Uncertainty descriptions are updated at test points to account for unmodeled time-varying dynamics of the airplane by ensuring the robust model is not invalidated by measured flight data. Robust margins computed with respect to this uncertainty remain conservative to the changing dynamics throughout the flight. A simulation clearly demonstrates this method can improve the efficiency of flight testing by accurately predicting the flutter margin to improve safety while reducing the necessary flight time.

First images of the crustal structure across the eastern Algerian margin, from deep penetrating seismic data.

NASA Astrophysics Data System (ADS)

Bouyahiaoui, Boualem; Abtout, Abdeslam; Sage, Françoise; Klingelhoeffer, Frauke; Collot, Jean-yves; Yelles-chaouche, Abdelkarim; Marok, Abbas; Djellit, Hamou; Galves, Audrey; Bracène, Rabah; Schnurle, Philippe; Graindorge, David; party, Scientific

2013-04-01

The Algerian continental margin North Africa presents one of only a few examples of a passive continental margin formed in a back-arc environment, which undergoes current compression and is proposed to be reactivated today. In the framework of the Algerian - French SPIRAL research program (Sismique Profonde et Investigation Regionale du nord de l'ALgérie), a seismic cruise was conducted on the R/V Atalante from September to November 2009. During the cruise, deep penetrating low frequency multichannel and wide-angle seismic data were acquired in order to study the deep structure of the Algerian margin. In this work, we present the preliminary results from wide-angle modeling of the North-east Algerian margin in the region of Annaba along a N-S transect using a data set of 42 OBS (ocean bottom seismometers) along a profile extending 117km, and 13 broadband seismological stations along a profile of 80 km length. Travel-time tomography and forward modeling were undertaken to model the velocity structure in this region. The resulting velocity models image the thickness of the sedimentary layers, which varies between a few hundred meters on the continental margin of more than 4 km in the basin. The crust is about 6 km thick in the basin, and thickens to 7-8 km between 40 and 60km distance from the margin toe. Crustal thickness increases to about 22 km at the continental slope over a distance of ~ 90 km. The nature of the crust was determined to be thin oceanic with abnormal velocity gradient in the basin, and thinned continental from around 30 km distance from the coast landward. Integration of the wide-angle seismic data with multichannel seismic, gravity and magnetic data will help to better understand the structure of the Algerian margin and the adjacent oceanic basin in the Annaba region, and to discuss the numerous cinematic models proposed in literature regarding the formation of the north-Algerian basin.

The impact of surgery on survival of patients with cutaneous melanoma: revisiting the role of primary tumor excision margins.

PubMed

Mocellin, Simone; Pasquali, Sandro; Nitti, Donato

2011-02-01

To quantify the impact of excision margins on disease-specific survival of patients with primary cutaneous melanoma. Current guidelines recommend narrow margins for the treatment of primary melanoma, although available evidence on this subject is not unequivocal and not always appropriately analyzed. A systematic review of randomized controlled trials (RCT) addressing the issue of wide versus narrow excision margins was performed. Meta-analysis methods for time-to-event data were used to extract hazard ratios(HR) and their 95% confidence intervals (CI) from eligible studies, and ultimately to estimate the summary effect of excision margins on patients' survival. The 5 eligible RCT enrolled a total of 3295 patients who were allocated to wide (3-5 cm) or narrow (1-2 cm) excision of their primary tumor. The data of locoregional disease-free (LDFS), disease-free (DFS),disease-specific (DSS), and overall (OS) survival were available for 3, 5, 3, and 5 RCT, respectively. The meta-analysis suggested that narrow margins might be associated with an increased risk of both locoregional disease recurrence (HR: 1.30, CI: 1.07-1.57; P = 0.01) and death by disease (HR: 1.28, CI:1.07-1.53, P = 0.01). As regards DFS, the borderline disadvantage (HR:1.13, CI: 0.995-1.28; P = 0.06) becomes significant when considering RCT that enrolled patients with thicker melanoma (HR: 1.19, CI: 1.02-1.39, P =0.03). When death by any cause (OS) was analyzed, no risk difference was found. The lack of DSS data from all the available RCT does not allow to draw definitive conclusions. However, current evidence appears sufficient to question the common belief that narrow excision margins are as safe as wide margins in the management of primary melanoma, that calls for further investigation in this field.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unwin, Stephen D.; Lowry, Peter P.; Layton, Robert F.

This is a working report drafted under the Risk-Informed Safety Margin Characterization pathway of the Light Water Reactor Sustainability Program, describing statistical models of passives component reliabilities.

Parallel computation of multigroup reactivity coefficient using iterative method

NASA Astrophysics Data System (ADS)

Susmikanti, Mike; Dewayatna, Winter

2013-09-01

One of the research activities to support the commercial radioisotope production program is a safety research target irradiation FPM (Fission Product Molybdenum). FPM targets form a tube made of stainless steel in which the nuclear degrees of superimposed high-enriched uranium. FPM irradiation tube is intended to obtain fission. The fission material widely used in the form of kits in the world of nuclear medicine. Irradiation FPM tube reactor core would interfere with performance. One of the disorders comes from changes in flux or reactivity. It is necessary to study a method for calculating safety terrace ongoing configuration changes during the life of the reactor, making the code faster became an absolute necessity. Neutron safety margin for the research reactor can be reused without modification to the calculation of the reactivity of the reactor, so that is an advantage of using perturbation method. The criticality and flux in multigroup diffusion model was calculate at various irradiation positions in some uranium content. This model has a complex computation. Several parallel algorithms with iterative method have been developed for the sparse and big matrix solution. The Black-Red Gauss Seidel Iteration and the power iteration parallel method can be used to solve multigroup diffusion equation system and calculated the criticality and reactivity coeficient. This research was developed code for reactivity calculation which used one of safety analysis with parallel processing. It can be done more quickly and efficiently by utilizing the parallel processing in the multicore computer. This code was applied for the safety limits calculation of irradiated targets FPM with increment Uranium.

Analysis of a Preloaded Bolted Joint in a Ceramic Composite Combustor

NASA Technical Reports Server (NTRS)

Hissam, D. Andy; Bower, Mark V.

2003-01-01

This paper presents the detailed analysis of a preloaded bolted joint incorporating ceramic materials. The objective of this analysis is to determine the suitability of a joint design for a ceramic combustor. The analysis addresses critical factors in bolted joint design including preload, preload uncertainty, and load factor. The relationship between key joint variables is also investigated. The analysis is based on four key design criteria, each addressing an anticipated failure mode. The criteria are defined in terms of margin of safety, which must be greater than zero for the design criteria to be satisfied. Since the proposed joint has positive margins of safety, the design criteria are satisfied. Therefore, the joint design is acceptable.

Consumer and farmer safety evaluation of application of botanical pesticides in black pepper crop protection.

PubMed

Hernández-Moreno, David; Soffers, Ans E M F; Wiratno; Falke, Hein E; Rietjens, Ivonne M C M; Murk, Albertinka J

2013-06-01

This study presents a consumer and farmer safety evaluation on the use of four botanical pesticides in pepper berry crop protection. The pesticides evaluated include preparations from clove, tuba root, sweet flag and pyrethrum. Their safety evaluation was based on their active ingredients being eugenol, rotenone, β-asarone and pyrethrins, respectively. Botanical pesticides from Acorus calamus are of possible concern because of the genotoxic and carcinogenic ingredient β-asarone although estimated margins of exposure (MOE) for consumers indicate a low priority for risk management. For the other three botanical pesticides the margin of safety (MOS) between established acute reference doses and/or acceptable daily intake values and intake estimates for the consumer, resulting from their use as a botanical pesticide are not of safety concern, with the exception for levels of rotenone upon use of tuba root extracts on stored berries. Used levels of clove and pyrethrum as botanical pesticides in pepper berry crop production is not of safety concern for consumers or farmers, whereas for use of tuba root and sweet flag some risk factors were defined requiring further evaluation and/or risk management. It seems prudent to look for alternatives for use of sweet flag extracts containing β-asarone. Copyright © 2013 Elsevier Ltd. All rights reserved.

Invasive vulvar carcinoma and the question of the surgical margin.

PubMed

Palaia, Innocenza; Bellati, Filippo; Calcagno, Marco; Musella, Angela; Perniola, Giorgia; Panici, Pierluigi B

2011-08-01

To assess the discrepancy between width of surgical margin measured with the naked eye/ruler by a surgeon before removing an invasive vulvar carcinoma, and width of margin measured under microscope by pathologist after fixation of the resected lesion with formalin. Potential relationships between discrepancy and disease recurrence were also investigated. This prospective study was conducted with resected lesions from 86 women who underwent surgery for primary/recurrent invasive vulvar carcinoma. After the surgeon removed the lesions surrounded by 1-2-cm margins, the pathologist determined margin width at the 4 cardinal points of 86 lesions (for a total of 344 margin assessments), first macroscopically and then under the microscope. A safety margin of 0.8 cm on microscopic view was achieved in 83% of cases (112 of 135) when the macroscopic measurement was 1cm, in 91% of cases (58 of 64) when it was 1.5 cm, and 98% of cases (105 of 107) when it was 2 cm. There was a small discrepancy between the surgeon's intent and the microscopic margin measurement, mostly related to tissue shrinkage. A 1-cm surgical margin corresponded to a 0.8-cm margin in microscopic view (the "safe margin") in most cases. Copyright © 2011 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Operating without a Safety Net: Gay Male Adolescents and Emerging Adults' Experiences of Marginalization and Migration, and Implications for Theory of Syndemic Production of Health Disparities

ERIC Educational Resources Information Center

Bruce, Douglas; Harper, Gary W.

2011-01-01

Health disparities among gay men (HIV, substance use, depression) have been described as a mutually occurring "syndemic" that is socially produced through two overarching dynamics: marginalization and migration. Although the syndemic theory proposes a developmental trajectory, it has been largely based on epidemiological studies of adult gay men…

The Wide Bay Canyon system: A case study of canyon morphology on the east Australian continental margin

NASA Astrophysics Data System (ADS)

Yu, P. W.; Hubble, T.; Airey, D.; Gallagher, S. J.; Clarke, S. L.

2014-12-01

A voyage was conducted aboard the RV Southern Surveyor in early 2013 to investigate the east Australian continental margin. From the continental slope of the Wide Bay region offshore Fraser Island, Queensland, Australia, remote sensing data and sediment samples were collected. Bathymetric data reveals that the continental slope of the region presents a mature canyon system. Eight dredge samples were recovered from the walls of Wide Bay Canyon and the adjacent, relatively intact continental slope along the entire length of the slope, from the start of the shelf break to the toe, in water depths ranging from 1100-2500 m. For these samples, sediment composition, biostratigraphic age, and bulk mineralogy data are reported. These slope-forming sediments are primarily comprised of calcareous sandy-silts. Occasional terrestrial plant fossils and minerals can be found in a mostly marine-fossiliferous composition, suggesting minor but significant riverine and aeolian input. Biostratigraphic dates extracted from the foraminiferal contents of these samples indicate that the intra-canyon and slope material was deposited between Middle Miocene to Pliocene, implying that the incision of this section of the margin and formation of the erosional features took place no earlier than the Pliocene. In conjunction with bathymetric data of the local continental slope, the depositional origins of this section of the east Australian continental margin, and the timing of major morphological events such as slope failure and canyon incision can be interpreted. The Wide Bay Canyon system can serve as a representative case study of local canyon formation, allowing a better understanding of the past or ongoing processes that are shaping the margin and giving way to similar morphologies.

Feminist Heuristics: Transforming the Foundation of Food Quality and Safety Assurance Systems

ERIC Educational Resources Information Center

Kimura, Aya Hirata

2012-01-01

Food safety and quality assurance systems have emerged as a key mechanism of food governance in recent years and are also popular among alternative agrofood movements, such as the organic and fair trade movements. Rural sociologists have identified many problems with existing systems, including corporate cooptation, the marginalization of small…

Computer codes for checking, plotting and processing of neutron cross-section covariance data and their application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sartori, E.; Roussin, R.W.

This paper presents a brief review of computer codes concerned with checking, plotting, processing and using of covariances of neutron cross-section data. It concentrates on those available from the computer code information centers of the United States and the OECD/Nuclear Energy Agency. Emphasis will be placed also on codes using covariances for specific applications such as uncertainty analysis, data adjustment and data consistency analysis. Recent evaluations contain neutron cross section covariance information for all isotopes of major importance for technological applications of nuclear energy. It is therefore important that the available software tools needed for taking advantage of this informationmore » are widely known as hey permit the determination of better safety margins and allow the optimization of more economic, I designs of nuclear energy systems.« less

Centrifugal Compressor Surge Margin Improved With Diffuser Hub Surface Air Injection

NASA Technical Reports Server (NTRS)

Skoch, Gary J.

2002-01-01

Aerodynamic stability is an important parameter in the design of compressors for aircraft gas turbine engines. Compression system instabilities can cause compressor surge, which may lead to the loss of an aircraft. As a result, engine designers include a margin of safety between the operating line of the engine and the stability limit line of the compressor. The margin of safety is typically referred to as "surge margin." Achieving the highest possible level of surge margin while meeting design point performance objectives is the goal of the compressor designer. However, performance goals often must be compromised in order to achieve adequate levels of surge margin. Techniques to improve surge margin will permit more aggressive compressor designs. Centrifugal compressor surge margin improvement was demonstrated at the NASA Glenn Research Center by injecting air into the vaned diffuser of a 4:1-pressure-ratio centrifugal compressor. Tests were performed using injector nozzles located on the diffuser hub surface of a vane-island diffuser in the vaneless region between the impeller trailing edge and the diffuser-vane leading edge. The nozzle flow path and discharge shape were designed to produce an air stream that remained tangent to the hub surface as it traveled into the diffuser passage. Injector nozzles were located near the leading edge of 23 of the 24 diffuser vanes. One passage did not contain an injector so that instrumentation located in that passage would be preserved. Several orientations of the injected stream relative to the diffuser vane leading edge were tested over a range of injected flow rates. Only steady flow (nonpulsed) air injection was tested. At 100 percent of the design speed, a 15-percent improvement in the baseline surge margin was achieved with a nozzle orientation that produced a jet that was bisected by the diffuser vane leading edge. Other orientations also improved the baseline surge margin. Tests were conducted at speeds below the design speed, and similar results were obtained. In most cases, the greatest improvement in surge margin occurred at fairly low levels of injected flow rate. Externally supplied injection air was used in these experiments. However, the injected flow rates that provided the greatest benefit could be produced using injection air that is recirculating between the diffuser discharge and nozzles located in the diffuser vaneless region. Future experiments will evaluate the effectiveness of recirculating air injection.

MARGATS cruise: investigation of the deep internal structure and the heterogeneous margins of the Demerara plateau reveals a polyphased volcanic history

NASA Astrophysics Data System (ADS)

Graindorge, D.; Museur, T.; Roest, W. R.; Klingelhoefer, F.; Loncke, L.; Basile, C.; Poetisi, E.; Deverchere, J.; Heuret, A.; Jean-Frederic, L.; Perrot, J.

2017-12-01

The MARGATS scientific cruise was carried out from October 20th to November 16th 2016 on board the R/V L'Atalante, offshore Suriname and French Guiana. This cruise is part of a program dedicated to the geological investigation of the continental margin, including the Demerara plateau, following the GUYAPLAC (2003), IGUANES (2013) and DRADEM (2016) cruises. The aim of MARGATS was to image the internal structure of the Demerara plateau and its different margins using coincident deep penetrating wide angle refraction and multi channel reflection seismic (MCS) methods. During the MARGATS experiment 171 OBS deployments were distributed along 4 wide-angle lines. Along each wide-angle line we also recorded coincident MCS data using a 3 km long 480 channel streamer. The dataset was completed by three MCS lines along the eastern part of the Demerara plateau. MCS MAR007 line which is coincident with line OBS MAR-3 was extended on land by 13 land stations deployed along the Maroni River. This line, together with MCS MAR001 and the coincident OBS MAR-1 line reveal the highly homogeneous deep structure of the internal part of the plateau. MCS MAR005 line, which is coincident with OBS MAR-2, MCS MAR006 line coincident with OBS MAR-4, MCS MAR002, MCS MAR003 and MCS MAR004 helps to elucidate the structural complexity of the northern transform margin and the eastern divergent margin of the plateau. These new datasets are highly complementary to the DRADEM dredge results which provide evidence for mid Jurassic volcanic rocks along the plateau and significant vertical displacements along the transform margin. These results allow to interpret the plateau as the remains of a huge jurassic volcanic divergent margin along the Central Atlantic ocean to the west, possibly remobilized during the cretaceous opening of the Equatorial Atlantic ocean as an highly oblique margin to the north and a divergent margin to the east in persistent presence of volcanism. This AGU session will be a great opportunity to present the exceptional quality of the seismic data, after the initial processing steps and how these data are conditioning a new understanding of the Demarara plateau and its margins which implies the hypothetic role of a new hot spot shaping the complex polyphased history of the structure.

Evaluation of intraoperative fluorescence imaging-guided surgery in cancer-bearing dogs: a prospective proof-of-concept phase II study in 9 cases.

PubMed

Cabon, Quentin; Sayag, David; Texier, Isabelle; Navarro, Fabrice; Boisgard, Raphaël; Virieux-Watrelot, Dorothée; Ponce, Frédérique; Carozzo, Claude

2016-04-01

The objective was to prospectively evaluate the application of intraoperative fluorescence imaging (IOFI) in the surgical excision of malignant masses in dogs, using a novel lipid nanoparticle contrast agent. Dogs presenting with spontaneous soft-tissue sarcoma or subcutaneous tumors were prospectively enrolled. Clinical staging and whole-body computed tomography (CT) were performed. All the dogs received an intravenous injection of dye-loaded lipid nanoparticles, LipImage 815. Wide or radical resection was realized after CT examination. Real-time IOFI was performed before skin incision and after tumor excision. In cases of radical resection, the lymph nodes (LNs) were imaged. The margin/healthy tissues fluorescence ratio or LN/healthy tissues fluorescence ratio was measured and compared with the histologic margins or LN status. Nine dogs were included. Limb amputation was performed in 3 dogs, and wide resection in 6. No adverse effect was noted. Fluorescence was observed in all 9 of the tumors. The margins were clean in 5 of 6 dogs after wide surgical resection, and the margin/healthy tissues fluorescence ratio was close to 1.0 in all these dogs. Infiltrated margins were observed in 1 case, with a margin/healthy tissues fluorescence ratio of 3.2. Metastasis was confirmed in 2 of 3 LNs, associated with LN/healthy tissues fluorescence ratios of 2.1 and 4.2, whereas nonmetastatic LN was associated with a ratio of 1.0. LipImage 815 used as a contrast agent during IOFI seemed to allow for good discrimination between tumoral and healthy tissues. Future studies are scheduled to evaluate the sensitivity and specificity of IOFI using LipImage 815 as a tracer. Copyright © 2016 Elsevier Inc. All rights reserved.

Palaeogeographic implications of the Messinian surface in the Valencia trough, northwestern Mediterranean Sea

NASA Astrophysics Data System (ADS)

Escutia, C.; Maldonado, A.

1992-03-01

Sparker (3000 J and 8000 J) and multichannel seismic reflection profiles across the Valencia trough show a Messinian unconformity incised by numerous valleys. The main feature of this surface is a large valley that generally underlies the present Valencia valley and is deeply entrenched into the Miocene deposits. The size of this palaeo-valley ranges from 0.5 km wide and 15-100 m deep at its western end, to 1.6-2.8 km wide and 200-250 m deep downstream. An important tributary system is observed, with a main canyon (6-8 km wide and 150-200 m deep) draining the Ebro margin, as well as many other smaller valleys draining the Catalan and Balearic margins. Downstream, other tributaries underlie the present canyons of the Catalan margin. The location of the tributary system is controlled by the Early Miocene rift structures. The relief of the Messinian surface is affected by post-Miocene deformation that results from salt diapirism, extensional faulting and related volcanism. Late Neogene to Quaternary volcanic edifices cut the Messinian surface and coincide with large residual magnetic anomalies. Lower Pliocene to Quaternary salt diapirism in the abyssal plain north of Menorca has created a series of structural highs. Between these highs are deep interdiapiric troughs or basins that have become sediment depocentres during the Plio-Quaternary. The complex network of erosional valleys from the Valencia trough continental margin demonstrates that the valley system in the basin was not related to the refilling of the Mediterranean, but to the Iberian and Balearic margin palaeodrainage that developed during the Messinian desiccation. The presence of at least three erosional unconformities suggests that there were alternating periods of flooding and retreat of Atlantic water during Messinian time. The Messinian subaerial margin with erosional valleys contrasts sharply with the Pliocene-Quaternary marine margin with progradational turbidite systems.

Modeling of a Flooding Induced Station Blackout for a Pressurized Water Reactor Using the RISMC Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Prescott, Steven R; Smith, Curtis L

2011-07-01

In the Risk Informed Safety Margin Characterization (RISMC) approach we want to understand not just the frequency of an event like core damage, but how close we are (or are not) to key safety-related events and how might we increase our safety margins. The RISMC Pathway uses the probabilistic margin approach to quantify impacts to reliability and safety by coupling both probabilistic (via stochastic simulation) and mechanistic (via physics models) approaches. This coupling takes place through the interchange of physical parameters and operational or accident scenarios. In this paper we apply the RISMC approach to evaluate the impact of amore » power uprate on a pressurized water reactor (PWR) for a tsunami-induced flooding test case. This analysis is performed using the RISMC toolkit: RELAP-7 and RAVEN codes. RELAP-7 is the new generation of system analysis codes that is responsible for simulating the thermal-hydraulic dynamics of PWR and boiling water reactor systems. RAVEN has two capabilities: to act as a controller of the RELAP-7 simulation (e.g., system activation) and to perform statistical analyses (e.g., run multiple RELAP-7 simulations where sequencing/timing of events have been changed according to a set of stochastic distributions). By using the RISMC toolkit, we can evaluate how power uprate affects the system recovery measures needed to avoid core damage after the PWR lost all available AC power by a tsunami induced flooding. The simulation of the actual flooding is performed by using a smooth particle hydrodynamics code: NEUTRINO.« less

41 CFR 102-80.115 - Is there more than one option for establishing that an equivalent level of safety exists?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., complete sprinkler protection can be expected to prevent flashover in the room of fire origin, limit fire... the times required for egress. If a combination of fire protection systems provides a margin of safety... Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

41 CFR 102-80.115 - Is there more than one option for establishing that an equivalent level of safety exists?

Code of Federal Regulations, 2012 CFR

2012-01-01

..., complete sprinkler protection can be expected to prevent flashover in the room of fire origin, limit fire... the times required for egress. If a combination of fire protection systems provides a margin of safety... Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

41 CFR 102-80.115 - Is there more than one option for establishing that an equivalent level of safety exists?

Code of Federal Regulations, 2014 CFR

2014-01-01

..., complete sprinkler protection can be expected to prevent flashover in the room of fire origin, limit fire... the times required for egress. If a combination of fire protection systems provides a margin of safety... Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

41 CFR 102-80.115 - Is there more than one option for establishing that an equivalent level of safety exists?

Code of Federal Regulations, 2011 CFR

2011-01-01

..., complete sprinkler protection can be expected to prevent flashover in the room of fire origin, limit fire... the times required for egress. If a combination of fire protection systems provides a margin of safety... Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

Safety and Suitability for Service Assessment Testing for Aircraft Launched Munitions

DTIC Science & Technology

2013-07-01

2013 12 benefits in terms of cost and test efficiency that tend to associate the Analytical S3 Test Approach with complex missile systems and the... systems containing expensive, non-safety related components. c. When using the Analytical S3 Test Approach for aircraft launched bombs, full BTCA is...establish safety margin of the system . Details of the Empirical Test Flow with full and reduced BTCA options are provided in Appendix B, Annexes 3 and

Takeoff certification considerations for large subsonic and supersonic transport airplanes using the Ames flight simulator for advanced aircraft

NASA Technical Reports Server (NTRS)

Snyder, C. T.; Drinkwater, F. J., III; Fry, E. B.; Forrest, R. D.

1973-01-01

Data for use in development of takeoff airworthiness standards for new aircraft designs such as the supersonic transport (SST) and the large wide-body subsonic jet transport are provided. An advanced motion simulator was used to compare the performance and handling characteristics of three representative large jet transports during specific flight certification tasks. Existing regulatory constraints and methods for determining rotation speed were reviewed, and the effects on takeoff performance of variations in rotation speed, pitch attitude, and pitch attitude rate during the rotation maneuver were analyzed. A limited quantity of refused takeoff information was obtained. The aerodynamics, wing loading, and thrust-to-weight ratio of the subject SST resulted in takeoff speeds limited by climb (rather than lift-off) considerations. Take-off speeds based on U.S. subsonic transport requirements were found unacceptable because of the criticality of rotation-abuse effects on one-engine-inoperative climb performance. Adequate safety margin was provided by takeoff speeds based on proposed Anglo-French supersonic transport (TSS) criteria, with the limiting criterion being that takeoff safety speed be at least 1.15 times the one-engine-inoperative zero-rate-of-climb speed. Various observations related to SST certification are presented.

Genotoxicity testing of a fenugreek extract.

PubMed

Flammang, A M; Cifone, M A; Erexson, G L; Stankowski, L F

2004-11-01

Fenugreek seeds have been used in traditional medicines as a remedy for diabetes. Rich in protein, fenugreek seeds contain the unique major free amino acid 4-hydroxyisoleucine (4-OH-Ile), which has been characterized as one of the active ingredients for blood glucose control. Current use of fenugreek in foodstuff has been limited to its role as a flavoring agent, and not as an ingredient to help mitigate the blood glucose response for people with diabetes. As part of a safety evaluation of novel ingredients for use in blood glucose control, the potential genotoxicity of a fenugreek seed extract (THL), containing a minimum of 40% 4-OH-ILE, was evaluated using the standard battery of tests (reverse mutation assay; mouse lymphoma forward mutation assay; mouse micronucleus assay) recommended by US Food and Drug Administration (FDA) for food ingredients. THL was determined not to be genotoxic under the conditions of the tested genetic toxicity battery. The negative assay results provide support that addition of THL to foodstuffs formulated for people with diabetes is expected to be safe. A wide safety margin is established, as anticipated doses are small compared to the doses administered in the assays.

Rational Design of Novel 1,3-Oxazine Based β-Secretase (BACE1) Inhibitors: Incorporation of a Double Bond To Reduce P-gp Efflux Leading to Robust Aβ Reduction in the Brain.

PubMed

Fuchino, Kouki; Mitsuoka, Yasunori; Masui, Moriyasu; Kurose, Noriyuki; Yoshida, Shuhei; Komano, Kazuo; Yamamoto, Takahiko; Ogawa, Masayoshi; Unemura, Chie; Hosono, Motoko; Ito, Hisanori; Sakaguchi, Gaku; Ando, Shigeru; Ohnishi, Shuichi; Kido, Yasuto; Fukushima, Tamio; Miyajima, Hirofumi; Hiroyama, Shuichi; Koyabu, Kiyotaka; Dhuyvetter, Deborah; Borghys, Herman; Gijsen, Harrie J M; Yamano, Yoshinori; Iso, Yasuyoshi; Kusakabe, Ken-Ichi

2018-05-23

Accumulation of Aβ peptides is a hallmark of Alzheimer's disease (AD) and is considered a causal factor in the pathogenesis of AD. β-Secretase (BACE1) is a key enzyme responsible for producing Aβ peptides, and thus agents that inhibit BACE1 should be beneficial for disease-modifying treatment of AD. Here we describe the discovery and optimization of novel oxazine-based BACE1 inhibitors by lowering amidine basicity with the incorporation of a double bond to improve brain penetration. Starting from a 1,3-dihydrooxazine lead 6 identified by a hit-to-lead SAR following HTS, we adopted a p K a lowering strategy to reduce the P-gp efflux and the high hERG potential leading to the discovery of 15 that produced significant Aβ reduction with long duration in pharmacodynamic models and exhibited wide safety margins in cardiovascular safety models. This compound improved the brain-to-plasma ratio relative to 6 by reducing P-gp recognition, which was demonstrated by a P-gp knockout mouse model.

Development, fabrication and test of a high purity silica heat shield

NASA Technical Reports Server (NTRS)

Rusert, E. L.; Drennan, D. N.; Biggs, M. S.

1978-01-01

A highly reflective hyperpure ( 25 ppm ion impurities) slip cast fused silica heat shield material developed for planetary entry probes was successfully scaled up. Process development activities for slip casting large parts included green strength improvements, casting slip preparation, aggregate casting, strength, reflectance, and subscale fabrication. Successful fabrication of a one-half scale Saturn probe (shape and size) heat shield was accomplished while maintaining the silica high purity and reflectance through the scale-up process. However, stress analysis of this original aggregate slip cast material indicated a small margin of safety (MS. = +4%) using a factor of safety of 1.25. An alternate hyperpure material formulation to increase the strength and toughness for a greater safety margin was evaluated. The alternate material incorporates short hyperpure silica fibers into the casting slip. The best formulation evaluated has a 50% by weight fiber addition resulting in an 80% increase in flexural strength and a 170% increase in toughness over the original aggregate slip cast materials with comparable reflectance.

A risk assessment of topical tretinoin as a potential human developmental toxin based on animal and comparative human data.

PubMed

Johnson, E M

1997-03-01

Although topically applied all-trans-retinoic acid (tretinoin) undergoes minimal absorption and adds negligibly to normal endogenous levels, its safety in humans is occasionally questioned because oral ingestion of retinoids at therapeutic levels is known to entail teratogenic risks. To assess the actual potential for developmental toxicity from treatment with topical tretinoin. Risk assessments were conducted on four known human developmental toxicants (valproic acid, methotrexate, thalidomide, and isotretinoin) and a potential developmental toxicant (acetylsalicylic acid). The margin of safety for each chemical was calculated from the ratio of animal no-observed adverse effect levels to human lowest-observed adverse effect levels or estimated exposure doses. The derived safety margin of more than 100 for topical tretinoin (with 2% absorption) contrasted sharply with the near unity values for valproic acid, methotrexate, thalidomide, and isotretinoin and was larger than that for acetylsalicylic acid. These data support other epidemiologic and animal data that topical tretinoin is not a potential human developmental toxicant.

Lunar Reconnaissance Orbiter K-Band (26 GHz) Signal Analysis: Initial Study Results

NASA Astrophysics Data System (ADS)

Morabito, D. D.; Heckman, D.

2017-11-01

Lower frequency telemetry bands are becoming more limited in bandwidth due to increased competition between flight projects and other entities. Higher frequency bands offer significantly more bandwidth and hence the prospect of much higher data rates. Future or prospective flight projects considering higher frequency bands such as Ka-band (32 GHz) for deep-space and K-band (26 GHz) for near-Earth telemetry links are interested in past flight experience with available received data at these frequencies. Given that there is increased degradation due to the atmosphere at these higher frequencies, there is an effort to retrieve flight data of received signal strength to analyze performance under a variety of factors. Such factors include elevation angle, season, and atmospheric conditions. This article reports on the analysis findings of over 10 million observations of received signal strength of the Lunar Reconnaissance Orbiter (LRO) spacecraft collected between 2014 and 2017. We analyzed these data to characterize link performance over a wide range of weather conditions, season, and as a function of elevation angle. Based on this analysis, we have confirmed the safety of using a 3-dB margin for preflight planning purposes. These results suggest that a 3-dB margin with respect to adverse conditions will ensure a 98 to 99 percent data return under 95 percent weather conditions at 26 GHz (K-band), thus confirming expectations from link budget predictions. The results suggest that this margin should be applicable for all elevation angles above 10 deg. Thus, missions that have sufficient power for their desired data rates may opt to use 10 deg as their minimum elevation angle. Limitations of this study include climate variability and the fact that the observations require removal of hotbody noise in order to perform an adequate cumulative distribution function (CDF) analysis, which is planned for a future comprehensive study. Flight projects may use other link margins depending upon available information, uncertainties of non-atmospheric link parameters, and mission phase.

Deltaic margins vulnerability: the role of landscape patches in flood regulation and climate adaptation

NASA Astrophysics Data System (ADS)

Valentini, E.; Taramelli, A.; Nguyen Xuan, A.; Filipponi, F.; Casarotti, C.; Morelli, A.

2015-12-01

Andrea Taramelli1,2,3, Emiliana Valentini2,3, Alessandra Nguyenxuan2, Federico Filipponi3, Chiara Casarotti2, Arianna Morelli1 1IUSS Institute for Advanced Study, Piazza della Vittoria 15, 27100, Pavia, ITALY 2Eucentre Foundation, European Centre for Training and Research in Earthquake Engineering, Pavia, Italy 3ISPRA, Institute for Environmental Protection and Research, Via Vitaliano Brancati 48, 00144, Roma Deltas are widely identified as vulnerable hotspots at the interface of the continental land mass and the world's coastal boundaries. With respect to increasing risks related to global change, the concept of ecosystem services has a capacity to contribute to safety of both, social and natural systems and vulnerability reduction. Here we study the role of the pool of ecosystem services in terms of flood mitigation and vulnerability reduction model, in a deltaic margins of the European coast (the complex land-sea system of the Waddenzee, comprising the Netherland inner coast and the islands, North Sea) then applicable to a wide variety of deltaic regions in developing areas. Extensive tidal mud flats, saltmarshes, dune ridges and sandy spits between the mainland and the chain of islands, support valuable sediment and primary production regulation along the seaside of these ecosystems. The system includes an incentive ecosystem structure (dune system) whereby economic agents would choose development activities that reduce vulnerability (flooding protection and erosion prevention) as well as satisfy production objectives (recreation and tourism). Vulnerability values extracted using remote sensing processors represent an innovative development of systems and methodologies. Using remote sensing observations, we investigate the distribution of spatial vegetation and substrate patterns controlled by changes in environmental variables acting on deltas, and we speculate the conditions under which the Real Elementary area can be defined.

Design and analysis of lifting tool assemblies to lift different engine block

NASA Astrophysics Data System (ADS)

Sawant, Arpana; Deshmukh, Nilaj N.; Chauhan, Santosh; Dabhadkar, Mandar; Deore, Rupali

2017-07-01

Engines block are required to be lifted from one place to another while they are being processed. The human effort required for this purpose is more and also the engine block may get damaged if it is not handled properly. There is a need for designing a proper lifting tool which will be able to conveniently lift the engine block and place it at the desired position without any accident and damage to the engine block. In the present study lifting tool assemblies are designed and analyzed in such way that it may lift different categories of engine blocks. The lifting tool assembly consists of lifting plate, lifting ring, cap screws and washers. A parametric model and assembly of Lifting tool is done in 3D modelling software CREO 2.0 and analysis is carried out in ANSYS Workbench 16.0. A test block of weight equivalent to that of an engine block is considered for the purpose of analysis. In the preliminary study, without washer the stresses obtained on the lifting tool were more than the safety margin. In the present design, washers were used with appropriate dimensions which helps to bring down the stresses on the lifting tool within the safety margin. Analysis is carried out to verify that tool design meets the ASME BTH-1 required safety margin.

Caught in the competitive crossfire: safety-net providers balance margin and mission in a profit-driven health care market.

PubMed

Cunningham, Peter J; Bazzoli, Gloria J; Katz, Aaron

2008-01-01

This paper describes how intensifying competitive pressures in the health system are simultaneously driving increased demand for safety-net care and taxing safety-net providers' ability to maintain the mission of serving all, regardless of ability to pay. Although safety-net providers adapted to previous challenges arising from managed care, health system pressures have been more intense and more generalized across different sectors in recent years than in the past. Providers are adopting some of the same strategies being used in the private sector to attract higher-paying patients and changing their "image" as a safety-net provider.

Test and model correlation of the atmospheric emission photometric imager fiberglass pedestal

NASA Technical Reports Server (NTRS)

Lee, H. M., III; Barker, L. A.

1990-01-01

The correlation is presented of the static loads testing and finite element modeling for the fiberglass pedestal used on the Atmospheric Emission Photometric Imaging (AEPI) experiment. This payload is to be launched in the space shuttle as part of the ATLAS-1 experiment. Strain gauge data from rosettes around the highly loaded base are compared to the same load case run for the Spacelab 1 testing done in 1981. Correlation of the model and test data was accomplished through comparison of the composite stress invariant using the expected flight loads for the ATLAS-1 mission. Where appropriate, the Tsai-Wu failure criteria was used in the development of the key margins of safety. Margins of safety are all positive for the pedestal and are reported.

DETERMINATION OF THE APPROPRIATE FQPA SAFETY FACTOR(S) IN THE ORGANOPHOSPHOROUS PESTICIDE CUMULATIVE RISK ASSESSMENT: SUSCEPTIBILITY AND SENSITIVITY TO THE COMMON MECHANISM, ACETYLCHOLINESTERASE INHIBITION

EPA Science Inventory

The Food Quality Protection Act of 1996 (FQPA) directs EPA, in setting pesticide tolerances, to use an additional tenfold margin of safety to protect infants and children taking into account the potential for pre- and postnatal toxicity and the completeness of the toxicology and ...

Hydraulics of high-yield orchard trees: a case study of three Malus domestica cultivars.

PubMed

Beikircher, Barbara; De Cesare, Chiara; Mayr, Stefan

2013-12-01

The drought tolerance of three economically important apple cultivars, Golden Delicious, Braeburn and Red Delicious, was analysed. The work offers insights into the hydraulics of these high-yield trees and indicates a possible hydraulic limitation of carbon gain. The hydraulic safety and efficiency of branch xylem and leaves were quantified, drought tolerance of living tissues was measured and stomatal regulation, turgor-loss point and osmotic potential at full turgor were analysed. Physiological measurements were correlated with anatomical parameters, such as conduit diameter, cell-wall reinforcement, stomatal density and stomatal pore length. Hydraulic safety differed considerably between the three cultivars with Golden Delicious being significantly less vulnerable to drought-induced embolism than Braeburn and Red Delicious. In Golden Delicious, leaves were less resistant than branch xylem, while in the other cultivars leaves were more resistant than branch xylem. Hydraulic efficiency and xylem anatomical measurements indicate differences in pit properties, which may also be responsible for variations in hydraulic safety. In all three cultivars, full stomatal closure occurred at water potentials where turgor had already been lost and severe loss of hydraulic conductivity as well as damage to living cells had been induced. The consequential negative safety margins pose a risk for hydraulic failure but facilitate carbon gain, which is further improved by the observed high stomatal conductance. Maximal stomatal conductance was clearly seen to be related to stomatal density and size. Based on our results, these three high-yield Malus domestica Borkh. cultivars span a wide range of drought tolerances, appear optimized for maximal carbon gain and, thus, all perform best under well-managed growing conditions.

Possible endocrine disrupting effects of parabens and their metabolites.

PubMed

Boberg, Julie; Taxvig, Camilla; Christiansen, Sofie; Hass, Ulla

2010-09-01

Parabens are preservatives used in a wide range of cosmetic products, including products for children, and some are permitted in foods. However, there is concern for endocrine disrupting effects. This paper critically discusses the conclusions of recent reviews and original research papers and provides an overview of studies on toxicokinetics. After dermal uptake, parabens are hydrolyzed and conjugated and excreted in urine. Despite high total dermal uptake of paraben and metabolites, little intact paraben can be recovered in blood and urine. Paraben metabolites may play a role in the endocrine disruption seen in experimental animals and studies are needed to determine human levels of parabens and metabolites. Overall, the estrogenic burden of parabens and their metabolites in blood may exceed the action of endogenous estradiol in childhood and the safety margin for propylparaben is very low when comparing worst-case exposure to NOAELs from experimental studies in rats and mice. Copyright 2010 Elsevier Inc. All rights reserved.

Live Attenuated Influenza Vaccines by Computer-Aided Rational Design

PubMed Central

Mueller, Steffen; Coleman, J. Robert; Papamichail, Dimitris; Ward, Charles B.; Nimnual, Anjaruwee; Futcher, Bruce; Skiena, Steven; Wimmer, Eckard

2010-01-01

Influenza claims 250,000 - 500,000 lives annually worldwide. Despite existing vaccines and enormous efforts in biomedical research, these staggering numbers have not changed significantly over the last two decades1, motivating the search for new, more effective, vaccines that can be rapidly designed and easily produced. Using influenza virus strain A/PR/8/34, we describe a systematic, rational approach, termed Synthetic Attenuated Virus Engineering (SAVE), to develop new, efficacious live attenuated influenza virus vaccine candidates through genome-scale changes in codon pair bias. Attenuation is based on many hundreds of nucleotide changes across the viral genome, offering high genetic stability and a wide margin of safety. The method can be applied rapidly to any emerging influenza virus in its entirety, an advantage that is significant for dealing with seasonal epidemics and pandemic threats, such as H5N1- or 2009-H1N1 influenza. PMID:20543832

Orion MPCV Touchdown Detection Threshold Development and Testing

NASA Technical Reports Server (NTRS)

Daum, Jared; Gay, Robert

2013-01-01

A robust method of detecting Orion Multi ]Purpose Crew Vehicle (MPCV) splashdown is necessary to ensure crew and hardware safety during descent and after touchdown. The proposed method uses a triple redundant system to inhibit Reaction Control System (RCS) thruster firings, detach parachute risers from the vehicle, and transition to the post ]landing segment of the Flight Software (FSW). The vehicle crew is the prime input for touchdown detection, followed by an autonomous FSW algorithm, and finally a strictly time based backup timer. RCS thrusters must be inhibited before submersion in water to protect against possible damage due to firing these jets under water. In addition, neglecting to declare touchdown will not allow the vehicle to transition to post ]landing activities such as activating the Crew Module Up ]righting System (CMUS), resulting in possible loss of communication and difficult recovery. A previous AIAA paper gAssessment of an Automated Touchdown Detection Algorithm for the Orion Crew Module h concluded that a strictly Inertial Measurement Unit (IMU) based detection method using an acceleration spike algorithm had the highest safety margins and shortest detection times of other methods considered. That study utilized finite element simulations of vehicle splashdown, generated by LS ]DYNA, which were expanded to a larger set of results using a Kriging surface fit. The study also used the Decelerator Systems Simulation (DSS) to generate flight dynamics during vehicle descent under parachutes. Proto ]type IMU and FSW MATLAB models provided the basis for initial algorithm development and testing. This paper documents an in ]depth trade study, using the same dynamics data and MATLAB simulations as the earlier work, to further develop the acceleration detection method. By studying the combined effects of data rate, filtering on the rotational acceleration correction, data persistence limits and values of acceleration thresholds, an optimal configuration was determined. The lever arm calculation, which removes the centripetal acceleration caused by vehicle rotation, requires that the vehicle angular acceleration be derived from vehicle body rates, necessitating the addition of a 2nd order filter to smooth the data. It was determined that using 200 Hz data directly from the vehicle IMU outperforms the 40 Hz FSW data rate. Data persistence counter values and acceleration thresholds were balanced in order to meet desired safety and performance. The algorithm proved to exhibit ample safety margin against early detection while under parachutes, and adequate performance upon vehicle splashdown. Fall times from algorithm initiation were also studied, and a backup timer length was chosen to provide a large safety margin, yet still trigger detection before CMUS inflation. This timer serves as a backup to the primary acceleration detection method. Additionally, these parameters were tested for safety on actual flight test data, demonstrating expected safety margins.

Is intralesional resection suitable for central grade 1 chondrosarcoma: A systematic review and updated meta-analysis.

PubMed

Chen, X; Yu, L J; Peng, H M; Jiang, C; Ye, C H; Zhu, S B; Qian, W W

2017-09-01

The surgical choice for grade 1 chondrosarcoma has been debated for decades. Intralesional resection can minimize the damage caused by surgery and offer better functional outcome. However, controversy remains about whether it will result in higher rates of local recurrence and metastasis, fewer complications, and better functional outcome compared with resection with wide margin. This systematic review and updated meta-analysis therefore compared intralesional resection and resection with wide margin in terms of local recurrence, metastasis, complications, and functional outcome. Medline, Embase, and the Cochrane Library were comprehensively searched in December 2016 to identify studies comparing intralesional resection and resection with wide margin for central grade 1 chondrosarcoma. Data of interest were extracted and analyzed using Review Manager 5.3. Ten studies involving 394 patients were included, with 214 patients who had intralesional resection and 180 patients who had resection with wide margin for grade 1 chondrosarcoma. Intralesional resection was associated with lower complication rates (P < 0.0001) and better Musculoskeletal Tumor Society score (MSTS). There were no significant differences in terms of overall local recurrence (P = 0.27), local recurrence based on adjuvant therapies (P = 0.22), local recurrence in studies that included lesions of the hand, foot, pelvis, and axial skeleton (P = 0.55), and metastasis (P = 0.74) between groups. Intralesional resection provides lower complications and better functional outcome with no significant increase in the risk of recurrence and metastasis. We think it is a suitable treatment for central grade 1 chondrosarcoma. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Preliminary results from combined wide-angle and reflection seismic data in the Natal Valley, South Mozambique margin across the Almirante Leite volcanic ridge : MZ2 profile (MOZ3/5 cruise).

NASA Astrophysics Data System (ADS)

Verrier, Fanny; Leprêtre, Angélique; Evain, Mikael; Schnurle, Philippe; Watremez, Louise; Aslanian, Daniel; De Clarens, Philippe; Afonso Dias, Nuno; Afilhado, Alexandra; Leroy, Sylvie; d'Acremont, Elia; Castilla, Raymi; Moulin, Maryline

2017-04-01

The study of South Mozambique passive margin is essential to understand its rifting evolution and better constrain kinematic reconstructions model of the Indian Ocean. MOZ3-5 oceanographic cruises (2016) is part of the PAMELA project (PAssive Margin Exploration LAboratory), conducted by TOTAL, IFREMER, in collaboration with Université de Bretagne Occidentale, Université Rennes 1, Université Pierre and Marie Curie, CNRS et IFPEN. These campaigns allowed the acquisition of wide-angle and multichannel seismic data as well as high resolution bathymetric data, dredges, magnetic and gravimetric data. This work focuses on the deep structure of the northern segment of the Natal Valley which was investigated along a 300 km long E-W seismic transect cross-cutting the Almirante Leite volcanic ridge (MZ2 profile). The wide-angle data set is composed of 23 OBS (Ocean Bottom Seismometers) and 19 LSS (Land Seismic Station) spaced by about 12 km and 4-5 km respectively. Forward modelling of the wide-angle data led to a preliminary 2D P-waves velocity model revealing the sedimentary architecture, crustal and lithospherical structures and shallow high velocity material at the volcanic ridge. The aim of this work is to present the first results on the crustal structure from P-waves velocity modeling along the profile MZ2, in order to discuss the sedimentary sequences, the geometry and nature of the crust (oceanic or continental) as well as structures associated with volcanism, and to better understand the margin's evolution. The post-doc of Fanny Verrier is co-funded by TOTAL and IFREMER as part of the PAMELA (Passive Margin Exploration Laboratories) scientific project. Moulin, M., Aslanian, D., 2016. PAMELA-MOZ03 cruise, RV Pourquoi pas ?, http://dx.doi.org/10.17600/16001600 Moulin, M., Evain, M., 2016. PAMELA-MOZ05 cruise, RV Pourquoi pas ?, http://dx.doi.org/10.17600/16009500

No-Touch Radiofrequency Ablation: A Comparison of Switching Bipolar and Switching Monopolar Ablation in Ex Vivo Bovine Liver

PubMed Central

Chang, Won; Lee, Sang Min; Han, Joon Koo

2017-01-01

Objective To evaluate the feasibility, efficiency, and safety of no-touch switching bipolar (SB) and switching monopolar (SM) radiofrequency ablation (RFA) using ex vivo bovine livers. Materials and Methods A pork loin cube was inserted as a tumor mimicker in the bovine liver block; RFA was performed using the no-touch technique in the SM (group A1; 10 minutes, n = 10, group A2; 15 minutes, n = 10) and SB (group B; 10 minutes, n = 10) modes. The groups were compared based on the creation of confluent necrosis with sufficient safety margins, the dimensions, and distance between the electrode and ablation zone margin (DEM). To evaluate safety, small bowel loops were placed above the liver surface and 30 additional ablations were performed in the same groups. Results Confluent necroses with sufficient safety margins were created in all specimens. SM RFA created significantly larger volumes of ablation compared to SB RFA (all p < 0.001). The DEM of group B was significantly lower than those of groups A1 and A2 (all p < 0.001). Although thermal injury to the small bowel was noted in 90%, 100%, and 30% of the cases in groups A1, A2, and B, respectively, full depth injury was noted only in 60% of group A2 cases. Conclusion The no-touch RFA technique is feasible in both the SB and SM modes; however, SB RFA appears to be more advantageous compared to SM RFA in the creation of an ablation zone while avoiding the unnecessary creation of an adjacent parenchymal ablation zone or adjacent small bowel injuries. PMID:28246508

MARGINS: Toward a novel science plan

NASA Astrophysics Data System (ADS)

Mutter, John C.

A science plan to study continental margins has been in the works for the past 3 years, with almost 200 Earth scientists from a wide variety of disciplines gathering at meetings and workshops. Most geological hazards and resources are found at continental margins, yet our understanding of the processes that shape the margins is meager.In formulating this MARGINS research initiative, fundamental issues concerning our understanding of basic Earth-forming processes have arisen. It is clear that a business-as-usual approach will not solve the class of problems defined by the MARGINS program; the solutions demand approaches different from those used in the past. In many cases, a different class of experiment will be required, one that is well beyond the capability of individual principle investigators to undertake on their own. In most cases, broadly based interdisciplinary studies will be needed.

Medical abortion: understanding perspectives of rural and marginalized women from rural South India.

PubMed

Sri, B Subha; Ravindran, T K Sundari

2012-09-01

To understand how rural and other groups of marginalized women define safe abortion; their perspectives and concerns regarding medical abortion (MA); and what factors affect their access to safe abortion. Focus group discussions were held with various groups of rural and marginalized women in Tamil Nadu to understand their perspectives and concerns on abortion, especially MA. Nearly a decade after mifepristone was approved for abortion in India, most study participants had never heard of MA. When they learned of the method, most preferred it over other methods of abortion. The women also had questions and concerns about the method and recommendations on how services should be provided. Their definition of a "safe abortion" included criteria beyond medical safety. They placed a high priority on "social safety," including confidentiality and privacy. In their view, factors affecting access to safe abortion and choice of provider included cost, assurance of secrecy, promptness of service provision, and absence of provider gatekeeping and provider-imposed conditions for receiving services. Women's preference for MA shows the potential of this technology to address the problem of unsafe abortion in India. Women need better access to information and services to realize this potential, however. Women's preferences regarding information dissemination and service provision need to be taken into account if policies and programs are to be truly responsive to the needs of marginalized women. Copyright © 2012. Published by Elsevier Ireland Ltd.

Patient positioning in head and neck cancer : Setup variations and safety margins in helical tomotherapy.

PubMed

Leitzen, Christina; Wilhelm-Buchstab, Timo; Müdder, Thomas; Heimann, Martina; Koch, David; Schmeel, Christopher; Simon, Birgit; Stumpf, Sabina; Vornholt, Susanne; Garbe, Stephan; Röhner, Fred; Schoroth, Felix; Schild, Hans Heinz; Schüller, Heinrich

2018-05-01

To evaluate the interfractional variations of patient positioning during intensity-modulated radiotherapy (IMRT) with helical tomotherapy in head and neck cancer and to calculate the required safety margins (sm) for bony landmarks resulting from the necessary table adjustments. In all, 15 patients with head and neck cancer were irradiated using the Hi-Art II tomotherapy system between April and September 2016. Before therapy sessions, patient position was frequently checked by megavolt computed tomography (MV-CT). Necessary table adjustments (ta) in the right-left (rl), superior-inferior (si) and anterior-posterior (ap) directions were recorded for four anatomical points: second, fourth and sixth cervical vertebral body (CVB), anterior nasal spine (ANS). Based upon these data sm were calculated for non-image-guided radiotherapy, image-guided radiotherapy (IGRT) and image guidance limited to a shortened area (CVB 2). Based upon planning CT the actual treatment required ta from -0.05 ± 1.31 mm for CVB 2 (ap) up to 2.63 ± 2.39 mm for ANS (rl). Considering the performed ta resulting from image control (MV-CT) we detected remaining ta from -0.10 ± 1.09 mm for CVB 4 (rl) up to 1.97 ± 1.64 mm for ANS (si). After theoretical adjustment of patients position to CVB 2 the resulting ta ranged from -0.11 ± 2.44 mm for CVB6 (ap) to 2.37 ± 2.17 mm for ANS (si). These data imply safety margins: uncorrected patient position: 3.63-9.95 mm, corrected positioning based upon the whole target volume (IGRT): 1.85-6.63 mm, corrected positioning based upon CVB 2 (IGRT): 3.13-6.66 mm. The calculated safety margins differ between anatomic regions. Repetitive and frequent image control of patient positioning is necessary that, however, possibly may be focussed on a limited region.

Passive margin evolution, initiation of subduction and the Wilson cycle

NASA Astrophysics Data System (ADS)

Cloetingh, S. A. P. L.; Wortel, M. J. R.; Vlaar, N. J.

1984-10-01

We have constructed finite element models at various stages of passive margin evolution, in which we have incorporated the system of forces acting on the margin, depth-dependent rheological properties and lateral variations across the margin. We have studied the interrelations between age-dependent forces, geometry and rheology, to decipher their net effect on the state of stress at passive margins. Lithospheric flexure induced by sediment loading dominates the state of stress at passive margins. This study has shown that if after a short evolution of the margin (time span a few tens of million years) subduction has not yet started, continued aging of the passive margin alone does not result in conditions more favourable for transformation into an active margin. Although much geological evidence is available in support of the key role small ocean basins play in orogeny and ophiolite emplacement, evolutionary frameworks of the Wilson cycle usually are cast in terms of opening and closing of wide ocean basins. We propose a more limited role for large oceans in the Wilson cycle concept.

Continental margin sedimentation: From sediment transport to sequence stratigraphy

USGS Publications Warehouse

Nittrouer, Charles A.; Austin, James A.; Field, Michael E.; Kravitz, Joseph H.; Syvitski, James P. M.; Wiberg, Patricia L.

2007-01-01

This volume on continental margin sedimentation brings together an expert editorial and contributor team to create a state-of-the-art resource. Taking a global perspective, the book spans a range of timescales and content, ranging from how oceans transport particles, to how thick rock sequences are formed on continental margins.- Summarizes and integrates our understanding of sedimentary processes and strata associated with fluvial dispersal systems on continental shelves and slopes- Explores timescales ranging from particle transport at one extreme, to deep burial at the other- Insights are presented for margins in general, and with focus on a tectonically active margin (northern California) and a passive margin (New Jersey), enabling detailed examination of the intricate relationships between a wide suite of sedimentary processes and their preserved stratigraphy- Includes observational studies which document the processes and strata found on particular margins, in addition to numerical models and laboratory experimentation, which provide a quantitative basis for extrapolation in time and space of insights about continental-margin sedimentation- Provides a research resource for scientists studying modern and ancient margins, and an educational text for advanced students in sedimentology and stratigraphy

Industry standards for recognition of marginal wood defects

Treesearch

Henry A. Huber; Steve Ruddell; Charles W. McMillin

1990-01-01

This study of 46 U.S. wood products companies that manufacture a variety of hardwood products found no consistently applied formal or standard definition of what constitutes a marginal defect. Analysis indicated homogeneous yet nonspecific rules are used. While there were wide variations in criteria, similar quantitative terms were used. Two distinct classes of defects...

Development of an advanced pitch active control system for a wide body jet aircraft

NASA Technical Reports Server (NTRS)

Guinn, Wiley A.; Rising, Jerry J.; Davis, Walt J.

1984-01-01

An advanced PACS control law was developed for a commercial wide-body transport (Lockheed L-1011) by using modern control theory. Validity of the control law was demonstrated by piloted flight simulation tests on the NASA Langley visual motion simulator. The PACS design objective was to develop a PACS that would provide good flying qualities to negative 10 percent static stability margins that were equivalent to those of the baseline aircraft at a 15 percent static stability margin which is normal for the L-1011. Also, the PACS was to compensate for high-Mach/high-g instabilities that degrade flying qualities during upset recoveries and maneuvers. The piloted flight simulation tests showed that the PACS met the design objectives. The simulation demonstrated good flying qualities to negative 20 percent static stability margins for hold, cruise and high-speed flight conditions. Analysis and wind tunnel tests performed on other Lockheed programs indicate that the PACS could be used on an advanced transport configuration to provide a 4 percent fuel savings which results from reduced trim drag by flying at negative static stability margins.

Novel safety floors do not influence early compensatory balance reactions in older adults.

PubMed

Wright, Alexander D; Heckman, George A; McIlroy, William E; Laing, Andrew C

2014-01-01

Novel safety flooring systems are a promising approach for reducing fall-related injuries in seniors, as they have been demonstrated to substantially reduce impact severity during falls, while minimally impairing balance control in community-dwelling older women. This pilot study aimed to characterize the potential effects of flooring conditions on dynamic balance control in retirement home-dwellers with more limited mobility. A tether-release paradigm was used to simulate a trip-type perturbation in 15 seniors across five flooring surfaces (three novel safety floors and one carpet compared to institutional-grade resilient rolled-sheeting). Kinetic and kinematic data tracked the displacement profiles of the underfoot centre-of-pressure and whole-body centre-of-mass, which were used to characterize compensatory balance reactions. Difference tests (ANOVA) found that the onset of the compensatory balance reaction was not associated with floor condition, nor were the timing and magnitude of peak centre-of-pressure excursion (minimum margin of safety) and velocity. Accordingly, the minimum margin of safety of the centre-of-mass was not significantly different across floors. Equivalence tests supported these findings. This study provides evidence that the carpet and novel safety floors tested do not negatively influence characteristics of initial dynamic balance responses following a lean-and-release perturbation compared to an institutional-grade resilient rolled-sheeting surface. In combination with reports of substantial force attenuative properties during fall-related impacts, these findings support the promise of novel safety floors as a biomechanically effective strategy for reducing fall-related injuries. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.

Responding to the challenge of untreatable gonorrhea: ETX0914, a first-in-class agent with a distinct mechanism-of-action against bacterial Type II topoisomerases.

PubMed

Basarab, Gregory S; Kern, Gunther H; McNulty, John; Mueller, John P; Lawrence, Kenneth; Vishwanathan, Karthick; Alm, Richard A; Barvian, Kevin; Doig, Peter; Galullo, Vincent; Gardner, Humphrey; Gowravaram, Madhusudhan; Huband, Michael; Kimzey, Amy; Morningstar, Marshall; Kutschke, Amy; Lahiri, Sushmita D; Perros, Manos; Singh, Renu; Schuck, Virna J A; Tommasi, Ruben; Walkup, Grant; Newman, Joseph V

2015-07-14

With the diminishing effectiveness of current antibacterial therapies, it is critically important to discover agents that operate by a mechanism that circumvents existing resistance. ETX0914, the first of a new class of antibacterial agent targeted for the treatment of gonorrhea, operates by a novel mode-of-inhibition against bacterial type II topoisomerases. Incorporating an oxazolidinone on the scaffold mitigated toxicological issues often seen with topoisomerase inhibitors. Organisms resistant to other topoisomerase inhibitors were not cross-resistant with ETX0914 nor were spontaneous resistant mutants to ETX0914 cross-resistant with other topoisomerase inhibitor classes, including the widely used fluoroquinolone class. Preclinical evaluation of ETX0914 pharmacokinetics and pharmacodynamics showed distribution into vascular tissues and efficacy in a murine Staphylococcus aureus infection model that served as a surrogate for predicting efficacious exposures for the treatment of Neisseria gonorrhoeae infections. A wide safety margin to the efficacious exposure in toxicological evaluations supported progression to Phase 1. Dosing ETX0914 in human volunteers showed sufficient exposure and minimal adverse effects to expect a highly efficacious anti-gonorrhea therapy.

Responding to the challenge of untreatable gonorrhea: ETX0914, a first-in-class agent with a distinct mechanism-of-action against bacterial Type II topoisomerases

PubMed Central

Basarab, Gregory S.; Kern, Gunther H.; McNulty, John; Mueller, John P.; Lawrence, Kenneth; Vishwanathan, Karthick; Alm, Richard A.; Barvian, Kevin; Doig, Peter; Galullo, Vincent; Gardner, Humphrey; Gowravaram, Madhusudhan; Huband, Michael; Kimzey, Amy; Morningstar, Marshall; Kutschke, Amy; Lahiri, Sushmita D.; Perros, Manos; Singh, Renu; Schuck, Virna J. A.; Tommasi, Ruben; Walkup, Grant; Newman, Joseph V.

2015-01-01

With the diminishing effectiveness of current antibacterial therapies, it is critically important to discover agents that operate by a mechanism that circumvents existing resistance. ETX0914, the first of a new class of antibacterial agent targeted for the treatment of gonorrhea, operates by a novel mode-of-inhibition against bacterial type II topoisomerases. Incorporating an oxazolidinone on the scaffold mitigated toxicological issues often seen with topoisomerase inhibitors. Organisms resistant to other topoisomerase inhibitors were not cross-resistant with ETX0914 nor were spontaneous resistant mutants to ETX0914 cross-resistant with other topoisomerase inhibitor classes, including the widely used fluoroquinolone class. Preclinical evaluation of ETX0914 pharmacokinetics and pharmacodynamics showed distribution into vascular tissues and efficacy in a murine Staphylococcus aureus infection model that served as a surrogate for predicting efficacious exposures for the treatment of Neisseria gonorrhoeae infections. A wide safety margin to the efficacious exposure in toxicological evaluations supported progression to Phase 1. Dosing ETX0914 in human volunteers showed sufficient exposure and minimal adverse effects to expect a highly efficacious anti-gonorrhea therapy. PMID:26168713

Development of CO2 laser Doppler instrumentation for detection of clear air turbulence, volume 2: Appendices

NASA Technical Reports Server (NTRS)

Harris, C. E.; Jelalian, A. V.

1979-01-01

Analyses of the mounting and mount support systems of the clear air turbulence transmitters verify that satisfactory shock and vibration isolation are attained. The mount support structure conforms to flight crash safety requirements with high margins of safety. Restraint cables reinforce the mounts in the critical loaded forward direction limiting maximum forward system deflection to 1 1/4 inches.

Los Alamos Novel Rocket Design Flight Tested

ScienceCinema

Tappan, Bryce

2018-04-16

Los Alamos National Laboratory scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that also delivers a high degree of safety. Researchers will now work to scale-up the design, as well as explore miniaturization of the system, in order to exploit all potential applications that would require high-energy, high-velocity, and correspondingly high safety margins.

Los Alamos Novel Rocket Design Flight Tested

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tappan, Bryce

Los Alamos National Laboratory scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that also delivers a high degree of safety. Researchers will now work to scale-up the design, as well as explore miniaturization of the system, in order to exploit all potential applications that would require high-energy, high-velocity, and correspondingly high safety margins.

Structural design/margin assessment

NASA Technical Reports Server (NTRS)

Ryan, R. S.

1993-01-01

Determining structural design inputs and the structural margins following design completion is one of the major activities in space exploration. The end result is a statement of these margins as stability, safety factors on ultimate and yield stresses, fracture limits (fracture control), fatigue lifetime, reuse criteria, operational criteria and procedures, stability factors, deflections, clearance, handling criteria, etc. The process is normally called a load cycle and is time consuming, very complex, and involves much more than structures. The key to successful structural design is the proper implementation of the process. It depends on many factors: leadership and management of the process, adequate analysis and testing tools, data basing, communications, people skills, and training. This process and the various factors involved are discussed.

Factors controlling late Cenozoic continental margin growth from the Ebro Delta to the western Mediterranean deep sea

USGS Publications Warehouse

Nelson, C.H.; Maldonado, A.

1990-01-01

The Ebro continental margin sedimentation system originated with a Messinian fluvial system. This system eroded both a major subaerial canyon cutting the margin southeastward from the present Ebro Delta and an axial valley that drained northeastward down Valencia Trough. Post-Messinian submergence of this topography and the Pliocene regime of high sea levels resulted in a marine hemipelagic drape over the margin. Late Pliocene to Pleistocene glacial climatic cycles, drainagebasin deforestation, and sea-level lowstands combined to increase sediment supply, cause the margin to prograde, and create a regime of lowstand sediment-gravity flows in the deeper margin. The depositional patterns of regressive, transgressive and highstand sea-level regimes suggest that location of the sediment source near the present Ebro Delta throughout the late Cenozoic, southward current advection of sediment, and greater subsidence in the southern margin combined to cause generally asymmetric progradation of the margin to the southeast. Thicker, less stable deposits filling the Messinian subaerial canyon underwent multiple retrograde failures, eroded wide gullied canyons and formed unchanneled base-of-slope sediment aprons in the central margin area; other margin areas to the north and south developed a series of channel-levee complexes. On the basin floor, the formation of Valencia Valley over the Messinian subaerial valley and earlier faults led to draining of about 20% of the Ebro Pleistocene sediment from channel-levee complexes through the valley to prograde Valencia Fan as much as 500 km northeast of the margin. Thus, the Ebro margin has two growth directions, mainly southeastward during higher sea levels, and eastward to northeastward during lower sea levels. The northeastward draining of turbidity currents has produced unusually thin and widely dispersed turbidite systems compared to those on ponded basin floors. During the past few centuries, man's impact has exceeded natural controls on Ebro margin growth. Deforestation of the drainage basin more than doubled the normal Holocene sediment supply, and construction of dams then reduced the supply by 95%. This reduction of the past 50 years has caused erosion of the delta and contamination of bottom sediment because normal Holocene sediment discharge is not available to prograde the delta or help dilute pollutants. ?? 1990.

The crustal structure of the north-eastern Gulf of Aden continental margin: insights from wide-angle seismic data

NASA Astrophysics Data System (ADS)

Watremez, L.; Leroy, S.; Rouzo, S.; D'Acremont, E.; Unternehr, P.; Ebinger, C.; Lucazeau, F.; Al-Lazki, A.

2011-02-01

The wide-angle seismic (WAS) and gravity data of the Encens survey allow us to determine the deep crustal structure of the north-eastern Gulf of Aden non-volcanic passive margin. The Gulf of Aden is a young oceanic basin that began to open at least 17.6 Ma ago. Its current geometry shows first- and second-order segmentation: our study focusses on the Ashawq-Salalah second-order segment, between Alula-Fartak and Socotra-Hadbeen fracture zones. Modelling of the WAS and gravity data (three profiles across and three along the margin) gives insights into the first- and second-order structures. (1) Continental thinning is abrupt (15-20 km thinning across 50-100 km distance). It is accommodated by several tilted blocks. (2) The ocean-continent transition (OCT) is narrow (15 km wide). The velocity modelling provides indications on its geometry: oceanic-type upper-crust (4.5 km s-1) and continental-type lower crust (>6.5 km s-1). (3) The thickness of the oceanic crust decreases from West (10 km) to the East (5.5 km). This pattern is probably linked to a variation of magma supply along the nascent slow-spreading ridge axis. (4) A 5 km thick intermediate velocity body (7.6 to 7.8 km s-1) exists at the crust-mantle interface below the thinned margin, the OCT and the oceanic crust. We interpret it as an underplated mafic body, or partly intruded mafic material emplaced during a `post-rift' event, according to the presence of a young volcano evidenced by heat-flow measurement (Encens-Flux survey) and multichannel seismic reflection (Encens survey). We propose that the non-volcanic passive margin is affected by post-rift volcanism suggesting that post-rift melting anomalies may influence the late evolution of non-volcanic passive margins.

Tectono-sedimentary evolution of the eastern Gulf of Aden conjugate passive margins: Narrowness and asymmetry in oblique rifting context

NASA Astrophysics Data System (ADS)

Nonn, Chloé; Leroy, Sylvie; Khanbari, Khaled; Ahmed, Abdulhakim

2017-11-01

Here, we focus on the yet unexplored eastern Gulf of Aden, on Socotra Island (Yemen), Southeastern Oman and offshore conjugate passive margins between the Socotra-Hadbeen (SHFZ) and the eastern Gulf of Aden fracture zones. Our interpretation leads to onshore-offshore stratigraphic correlation between the passive margins. We present a new map reflecting the boundaries between the crustal domains (proximal, necking, hyper-extended, exhumed mantle, proto-oceanic and oceanic domains) and structures using bathymetry, magnetic surveys and seismic reflection data. The most striking result is that the magma-poor conjugate margins exhibit asymmetrical architecture since the thinning phase (Upper Rupelian-Burdigalian). Their necking domains are sharp ( 40-10 km wide) and their hyper-extended domains are narrow and asymmetric ( 10-40 km wide on the Socotra margin and 50-80 km wide on the Omani margin). We suggest that this asymmetry is related to the migration of the rift center producing significant lower crustal flow and sequential faulting in the hyper-extended domain. Throughout the Oligo-Miocene rifting, far-field forces dominate and the deformation is accommodated along EW to N110°E northward-dipping low angle normal faults. Convection in the mantle near the SHFZ may be responsible of change in fault dip polarity in the Omani hyper-extended domain. We show the existence of a northward-dipping detachment fault formed at the beginning of the exhumation phase (Burdigalien). It separates the northern upper plate (Oman) from southern lower plate (Socotra Island) and may have generated rift-induced decompression melting and volcanism affecting the upper plate. We highlight multiple generations of detachment faults exhuming serpentinized subcontinental mantle in the ocean-continent transition. Associated to significant decompression melting, final detachment fault may have triggered the formation of a proto-oceanic crust at 17.6 Ma and induced late volcanism up to 10 Ma. Finally, the setting up of a steady-state oceanic spreading center occurs at 17 Ma.

1980 survey of public perceptions on highway safety.

DOT National Transportation Integrated Search

1980-09-01

The 1980 survey again found a wide discrepancy between public attitudes : and perceptions about safety belts and the public's usage of safety : belts. While it is widely believed that safety belts may help to : prevent serious injury in an automobile...

Airframe/TPS Session

NASA Technical Reports Server (NTRS)

Welch, Sharon; Bowles, David

2000-01-01

This viewgraph presentation gives an overview of the second generation Reusable Launch Vehicle (RLV) airframe configuration, including details on the structures and materials, tanks, airframe/cryotank demonstrations, internal assemblies, weight growth and margin, and safety and cost requirements.

Gross mismatch between thermal tolerances and environmental temperatures in a tropical freshwater snail: climate warming and evolutionary implications.

PubMed

Polgar, Gianluca; Khang, Tsung Fei; Chua, Teddy; Marshall, David J

2015-01-01

The relationship between acute thermal tolerance and habitat temperature in ectotherm animals informs about their thermal adaptation and is used to assess thermal safety margins and sensitivity to climate warming. We studied this relationship in an equatorial freshwater snail (Clea nigricans), belonging to a predominantly marine gastropod lineage (Neogastropoda, Buccinidae). We found that tolerance of heating and cooling exceeded average daily maximum and minimum temperatures, by roughly 20°C in each case. Because habitat temperature is generally assumed to be the main selective factor acting on the fundamental thermal niche, the discordance between thermal tolerance and environmental temperature implies trait conservation following 'in situ' environmental change, or following novel colonisation of a thermally less-variable habitat. Whereas heat tolerance could relate to an historical association with the thermally variable and extreme marine intertidal fringe zone, cold tolerance could associate with either an ancestral life at higher latitudes, or represent adaptation to cooler, higher-altitudinal, tropical lotic systems. The broad upper thermal safety margin (difference between heat tolerance and maximum environmental temperature) observed in this snail is grossly incompatible with the very narrow safety margins typically found in most terrestrial tropical ectotherms (insects and lizards), and hence with the emerging prediction that tropical ectotherms, are especially vulnerable to environmental warming. A more comprehensive understanding of climatic vulnerability of animal ectotherms thus requires greater consideration of taxonomic diversity, ecological transition and evolutionary history. Copyright © 2014 Elsevier Ltd. All rights reserved.

Comparative biogeochemistry-ecosystem-human interactions on dynamic continental margins

USGS Publications Warehouse

Levin, Lisa A.; Liu, Kon-Kee; Emeis, Kay-Christian; Breitburg, Denise L.; Cloern, James; Deutsch, Curtis; Giani, Michele; Goffart, Anne; Hofmann, Eileen E.; Lachkar, Zouhair; Limburg, Karin; Liu, Su-Mei; Montes, Enrique; Naqvi, Wajih; Ragueneau, Olivier; Rabouille, Christophe; Sarkar, Santosh Kumar; Swaney, Dennis P.; Wassman, Paul; Wishner, Karen F.

2014-01-01

The ocean’s continental margins face strong and rapid change, forced by a combination of direct human activity, anthropogenic CO2-induced climate change, and natural variability. Stimulated by discussions in Goa, India at the IMBER IMBIZO III, we (1) provide an overview of the drivers of biogeochemical variation and change on margins, (2) compare temporal trends in hydrographic and biogeochemical data across different margins (3) review ecosystem responses to these changes, (4) highlight the importance of margin time series for detecting and attributing change and (5) examine societal responses to changing margin biogeochemistry and ecosystems. We synthesize information over a wide range of margin settings in order to identify the commonalities and distinctions among continental margin ecosystems. Key drivers of biogeochemical variation include long-term climate cycles, CO2-induced warming, acidification, and deoxygenation, as well as sea level rise, eutrophication, hydrologic and water cycle alteration, changing land use, fishing, and species invasion. Ecosystem responses are complex and impact major margin services including primary production, fisheries production, nutrient cycling, shoreline protection, chemical buffering, and biodiversity. Despite regional differences, the societal consequences of these changes are unarguably large and mandate coherent actions to reduce, mitigate and adapt to multiple stressors on continental margins.

Comparative biogeochemistry-ecosystem-human interactions on dynamic continental margins

NASA Astrophysics Data System (ADS)

Levin, Lisa A.; Liu, Kon-Kee; Emeis, Kay-Christian; Breitburg, Denise L.; Cloern, James; Deutsch, Curtis; Giani, Michele; Goffart, Anne; Hofmann, Eileen E.; Lachkar, Zouhair; Limburg, Karin; Liu, Su-Mei; Montes, Enrique; Naqvi, Wajih; Ragueneau, Olivier; Rabouille, Christophe; Sarkar, Santosh Kumar; Swaney, Dennis P.; Wassman, Paul; Wishner, Karen F.

2015-01-01

The oceans' continental margins face strong and rapid change, forced by a combination of direct human activity, anthropogenic CO2-induced climate change, and natural variability. Stimulated by discussions in Goa, India at the IMBER IMBIZO III, we (1) provide an overview of the drivers of biogeochemical variation and change on margins, (2) compare temporal trends in hydrographic and biogeochemical data across different margins, (3) review ecosystem responses to these changes, (4) highlight the importance of margin time series for detecting and attributing change and (5) examine societal responses to changing margin biogeochemistry and ecosystems. We synthesize information over a wide range of margin settings in order to identify the commonalities and distinctions among continental margin ecosystems. Key drivers of biogeochemical variation include long-term climate cycles, CO2-induced warming, acidification, and deoxygenation, as well as sea level rise, eutrophication, hydrologic and water cycle alteration, changing land use, fishing, and species invasion. Ecosystem responses are complex and impact major margin services. These include primary production, fisheries production, nutrient cycling, shoreline protection, chemical buffering, and biodiversity. Despite regional differences, the societal consequences of these changes are unarguably large and mandate coherent actions to reduce, mitigate and adapt to multiple stressors on continental margins.

75 FR 68224 - Safety Management Systems for Part 121 Certificate Holders

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... the general framework for an organization-wide safety management approach to air carrier operations... System? An SMS is an organization-wide approach to managing safety risk and assuring the effectiveness of... under 14 CFR part 121 to develop and implement a safety management system (SMS) to improve the safety of...

Watch Out! A Teacher's Guide to Traffic Safety.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

This guide provides teachers with activities that can initiate an awareness of the New York city-wide traffic safety campaign and reinforce safety education. It contains the following: (1) background information on safety rules for teachers; (2) curriculum topics that can include traffic safety issues; (3) class- and school-wide activities for…

Variations of mesoscale and large-scale sea ice morphology in the 1984 Marginal Ice Zone Experiment as observed by microwave remote sensing

NASA Technical Reports Server (NTRS)

Campbell, W. J.; Josberger, E. G.; Gloersen, P.; Johannessen, O. M.; Guest, P. S.

1987-01-01

The data acquired during the summer 1984 Marginal Ice Zone Experiment in the Fram Strait-Greenland Sea marginal ice zone, using airborne active and passive microwave sensors and the Nimbus 7 SMMR, were analyzed to compile a sequential description of the mesoscale and large-scale ice morphology variations during the period of June 6 - July 16, 1984. Throughout the experiment, the long ice edge between northwest Svalbard and central Greenland meandered; eddies were repeatedly formed, moved, and disappeared but the ice edge remained within a 100-km-wide zone. The ice pack behind this alternately diffuse and compact edge underwent rapid and pronounced variations in ice concentration over a 200-km-wide zone. The high-resolution ice concentration distributions obtained in the aircraft images agree well with the low-resolution distributions of SMMR images.

Cascadia Gas Vent Distribution and Challenges to Quantify Margin-Wide Methane Fluxes

NASA Astrophysics Data System (ADS)

Scherwath, M.; Riedel, M.; Roemer, M.; Veloso, M.; Heesemann, M.; Spence, G.

2017-12-01

Gas venting along the Cascadia Margin has been mapped over decades with ship sonar and in recent years with permanent seafloor installations utilizing the seafloor observatories NEPTUNE of Ocean Networks Canada and the Cabled Array of the Ocean Observatories Initiative. We show the distribution of over 1000 vents, most on the shallow shelf. For a third of the vents we have estimated methane flow rates, ranging from 0.05 to 69 L/min, and extrapolate these results to a margin-wide methane flow estaimate of around 4 Mt/yr (at surface pressure and temperature) and a flux estimate of 0.05 kg yr-1 m-2. However, these estimates are based on several assumptions, e.g. bubble sizes or data coverage, providing large uncertainties. With continued research expeditions and potential seafloor calibration experiments, these data can be refined and improved in future years.

Hospital financial performance in the recent recession and implications for institutions that remain financially weak.

PubMed

Bazzoli, Gloria J; Fareed, Naleef; Waters, Teresa M

2014-05-01

The recent recession had a profound effect on all sectors of the US economy, including health care. We examined how private hospitals fared through the recession and considered how changes in their financial health may affect their ability to respond to future industry challenges. We categorized 2,971 private short-term general medical or surgical hospitals (both nonprofit and for-profit) according to their pre-recession financial health and safety-net status, and we examined their operational status changes and operating and total financial margins during 2006-11. We found that hospitals that were financially weak before the recession remained so during and after the recession. The total margins of nonprofit hospitals (both safety-net and other institutions) declined in 2008 but returned to their pre-recession levels by 2011. The recession did not create additional fiscal pressure on hospitals that were previously financially weak or in safety-net roles. However, both groups continue to have notable financial deficiencies that could limit their abilities to meet the growing demands on the industry.

Sca-1(+) mesenchymal stromal cells inhibit splenic marginal zone B lymphocytes commitment through Caspase-3.

PubMed

Chen, Yaozhen; Yang, Jialei; Zhang, Hui-Jie; Fan, Hong; An, Ning; Xin, Jiajia; Li, Na; Xu, Jinmei; Yin, Wen; Wu, Zhongliang; Hu, Xingbin

2016-05-01

Mesenchymal stromal cells (MSCs) have been characterized as an important component of hematopoietic niche, which are capable of modulating the immune system through interaction with a wide range of immune cells. Marginal zone B cells, one main type of mature B lymphocytes, play a central role in eliciting antibody response against pathogens. However, how MSCs and its subpopulations regulate marginal zone B cells commitment is unknown yet. In this study, we assessed the contribution of Sca-1(+) MSCs on marginal zone B cells commitment. Our results showed that Sca-1(+) MSCs inhibit the commitment of marginal zone B lymphocytes. The inhibition was exerted through lowered Caspase-3 expression. Furthermore, we found marginal zone B lymphocytes in spleen of Caspase-3 knockout mice decreased and Caspase-3 knockout Sca-1(+) MSCs accounted for the MZB lymphocytes decrease. In conclusion, our investigation provided clues about Sca-1(+) MSCs regulation on the commitment of marginal zone B cells through Caspase-3 gene. © 2016 International Federation for Cell Biology.

Plutonium Critical Mass Curve Comparison to Mass at Upper Subcritical Limit (USL) Using Whisper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alwin, Jennifer Louise; Zhang, Ning

Whisper is computational software designed to assist the nuclear criticality safety analyst with validation studies with the MCNP ® Monte Carlo radiation transport package. Standard approaches to validation rely on the selection of benchmarks based upon expert judgment. Whisper uses sensitivity/uncertainty (S/U) methods to select relevant benchmarks to a particular application or set of applications being analyzed. Using these benchmarks, Whisper computes a calculational margin. Whisper attempts to quantify the margin of subcriticality (MOS) from errors in software and uncertainties in nuclear data. The combination of the Whisper-derived calculational margin and MOS comprise the baseline upper subcritical limit (USL), tomore » which an additional margin may be applied by the nuclear criticality safety analyst as appropriate to ensure subcriticality. A series of critical mass curves for plutonium, similar to those found in Figure 31 of LA-10860-MS, have been generated using MCNP6.1.1 and the iterative parameter study software, WORM_Solver. The baseline USL for each of the data points of the curves was then computed using Whisper 1.1. The USL was then used to determine the equivalent mass for plutonium metal-water system. ANSI/ANS-8.1 states that it is acceptable to use handbook data, such as the data directly from the LA-10860-MS, as it is already considered validated (Section 4.3 4) “Use of subcritical limit data provided in ANSI/ANS standards or accepted reference publications does not require further validation.”). This paper attempts to take a novel approach to visualize traditional critical mass curves and allows comparison with the amount of mass for which the k eff is equal to the USL (calculational margin + margin of subcriticality). However, the intent is to plot the critical mass data along with USL, not to suggest that already accepted handbook data should have new and more rigorous requirements for validation.« less

Differential Impact of Close Surgical Margin on Local Recurrence According to Primary Tumor Size in Oral Squamous Cell Carcinoma.

PubMed

Jang, Jeon Yeob; Choi, Nayeon; Ko, Young-Hyeh; Chung, Man Ki; Son, Young-Ik; Baek, Chung-Hwan; Baek, Kwan-Hyuck; Jeong, Han-Sin

2017-06-01

The extent of surgical safety margin (gross tumor border to resection margin) in oral cancer surgery remains unclear, and no study has determined the differential impact of close surgical margin and microscopic extension according to primary tumor size in oral cancers. We retrospectively analyzed the clinical data of 325 patients with surgically treated oral cavity squamous cell carcinomas to determine the effect of a close surgical margin (<5 mm) (cSM 5 ) on local recurrence. In addition, the depth of microscopic tumor infiltration was determined in 90 available surgical specimens. The cSM 5 was not related to the risk of local tumor recurrence in early-stage oral cancer, while it significantly increased the rate of local tumor recurrence in resectable advanced-stage oral cancers (hazard ratio 3.157, 95 % confidence interval 1.050-9.407, p = 0.041). Addition of postoperative adjuvant radiation to early-stage tumors with cSM 5 did not further reduce the local recurrence rate compared to surgery alone. The depth of microscopic tumor extension from the gross tumor border was significantly associated with primary tumor thickness (ρ = 0.390, p < 0.001) and tumor sizes (ρ = 0.308, p = 0.003), which was a median (range) of 0.84 (0.14-2.32) mm in T1, 1.06 (0.20-4.34) mm in T2, and 1.77 (0.13-4.70) mm in T3-4. The cSM 5 was a significant risk factor for local recurrence only in advanced oral cancers, but not in early-stage tumors, where microscopic tumor extension was not beyond 3 mm in T1 tumors. Thus, the extent of surgical safety margin can be redefined according to the primary tumor size.

44 CFR 60.22 - Planning considerations for flood-prone areas.

Code of Federal Regulations, 2012 CFR

2012-10-01

... community shall consider— (1) Preservation of the flood-prone areas for open space purposes; (2) Relocation... debris, to provide an added margin of safety against floods having a magnitude greater than the base...

44 CFR 60.22 - Planning considerations for flood-prone areas.

Code of Federal Regulations, 2013 CFR

2013-10-01

... community shall consider— (1) Preservation of the flood-prone areas for open space purposes; (2) Relocation... debris, to provide an added margin of safety against floods having a magnitude greater than the base...

44 CFR 60.22 - Planning considerations for flood-prone areas.

Code of Federal Regulations, 2014 CFR

2014-10-01

... community shall consider— (1) Preservation of the flood-prone areas for open space purposes; (2) Relocation... debris, to provide an added margin of safety against floods having a magnitude greater than the base...

The MIRROR cruise (2011): Deep crustal structure of the Moroccan Atlantic Margin from wide-angle and reflection seismic data

NASA Astrophysics Data System (ADS)

Klingelhoefer, F.; Aslanian, D.; Sahabi, M.; Moulin, M.; Schnurle, P.; Berglar, K.; Biari, Y.; Feld, A.; Graindorge, D.; Corela, C.; Mehdi, K.; Zourarah, B.; Perrot, J.; Alves Ribeiro, J.; Reichert, C. J.

2011-12-01

The study of conjugate margins is important to test different hypotheses of rifting and initial opening of an ocean. In this scope, seven wide-angle seismic profiles were acquired on the Moroccan Atlantic margin (at the latitudes between 32° and 33° N) together with coincident deep frequency reflection seismic data during the MIRROR cruise in May and June 2011. The main seismic profile is conjugate to an existing wide-angle seismic profile off Nova Scotia (SMART 2). Further objectives of the cruise were to image ocean-continent transition zone, to detect and eventually quantify exhumed upper mantle material present in this zone and to determine the origin of the high amplitude West African Magnetic Anomaly, which is conjugate to the north American East Coast Magnetic Anomaly and can be linked to the opening of the Atlantic. Two of the newly acquired profiles are located perpendicular and five parallel to the Moroccan margin. The seismic profiles are between 130 and 260 km in length and between 28 and 13 ocean-bottom seismometers were deployed on each one. One profile was extended on land by 15 landstations in order to better image the zone of continental thinning. A 4.5 km digital streamer and a 7200 cu inch tuned airgun array were used for the acquisition of the seismic data. Additionally magnetic, bathymetric and high resolution seismic data were acquired in the study region. Preliminary results from tomographic inversion of the first arrivals from the ocean-bottom seismometer data image the zone of crustal thinning from about 25 km to 6 km in the basin along about 70 kilometers of the profiles which are located perpendicular to the margin. The oceanic crust can be divided into 2 regions, based on the lower crustal velocities. Upper mantle velocities are about 8.0 km/s. The coincident reflection seismic data show the fine basement and sedimentary structures including salt tectonics in the basin. The comparative study of the two conjugate profiles on the Moroccan and Nova Scotia margin will give new insights into the original opening of the Atlantic ocean. Further work on this data set will include forward modelling of the wide-angle seismic data, gravity and magnetic modelling.

Deep structure of the continental margin and basin off Greater Kabylia, Algeria - New insights from wide-angle seismic data modeling and multichannel seismic interpretation

NASA Astrophysics Data System (ADS)

Aïdi, Chafik; Beslier, Marie-Odile; Yelles-Chaouche, Abdel Karim; Klingelhoefer, Frauke; Bracene, Rabah; Galve, Audrey; Bounif, Abdallah; Schenini, Laure; Hamai, Lamine; Schnurle, Philippe; Djellit, Hamou; Sage, Françoise; Charvis, Philippe; Déverchère, Jacques

2018-03-01

During the Algerian-French SPIRAL survey aimed at investigating the deep structure of the Algerian margin and basin, two coincident wide-angle and reflection seismic profiles were acquired in central Algeria, offshore Greater Kabylia, together with gravimetric, bathymetric and magnetic data. This 260 km-long offshore-onshore profile spans the Balearic basin, the central Algerian margin and the Greater Kabylia block up to the southward limit of the internal zones onshore. Results are obtained from modeling and interpretation of the combined data sets. The Algerian basin offshore Greater Kabylia is floored by a thin oceanic crust ( 4 km) with P-wave velocities ranging between 5.2 and 6.8 km/s. In the northern Hannibal High region, the atypical 3-layer crustal structure is interpreted as volcanic products stacked over a thin crust similar to that bordering the margin and related to Miocene post-accretion volcanism. These results support a two-step back-arc opening of the west-Algerian basin, comprising oceanic crust accretion during the first southward stage, and a magmatic and probably tectonic reworking of this young oceanic basement during the second, westward, opening phase. The structure of the central Algerian margin is that of a narrow ( 70 km), magma-poor rifted margin, with a wider zone of distal thinned continental crust than on the other margin segments. There is no evidence for mantle exhumation in the sharp ocean-continent transition, but transcurrent movements during the second opening phase may have changed its initial geometry. The Plio-Quaternary inversion of the margin related to ongoing convergence between Africa and Eurasia is expressed by a blind thrust system under the margin rising toward the surface at the slope toe, and by an isostatic disequilibrium resulting from opposite flexures of two plates decoupled at the continental slope. This disequilibrium is likely responsible for the peculiar asymmetrical shape of the crustal neck that may thus be a characteristic feature of inverted rifted margins.

Assessment of the stability of a multimachine power system by the transient energy margin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stanton, S.E.

1982-01-01

This reasearch develops a tool for the direct assessment of the transient stability of a multimachine electric power system that is subject to a large disturbance. The tool is the Transient Energy Margin. The transient of interest is the first swing (or inertial) transient. The Transient Energy Margin is computed by evaluating an energy function using the relevant unstable equilibrium point and the system states at the instant the disturbance is removed. In evaluating the function, a significant portion of the fault kinetic energy is identified as not contributing to system instability. The resulting energy value is a measure ofmore » the margin-of-safety for the disturbed system. A distinction is proposed between assessing system stability and assessing system security. The Transient Energy Margin is used first to assess the stability of the system. This profile ranks various distrubances to display the strengths and weaknesses of the system. A modified Transient Energy Margin is then proposed as an assessment of security; the transient energy margin profile is repeated to evaluate the system response in terms of the local minimum energy conditions approached by the critical trajectories. Both techniques are applied to a practical, 17 generator test system.« less

Comparing vaccines: a systematic review of the use of the non-inferiority margin in vaccine trials.

PubMed

Donken, R; de Melker, H E; Rots, N Y; Berbers, G; Knol, M J

2015-03-17

Non-inferiority (NI) randomized controlled trials (RCTs) aim to demonstrate that a new treatment is no worse than a comparator that has already shown its efficacy over placebo within a pre-specified margin. However, clear guidelines on how the NI margin should be determined are lacking for vaccine trials. A difference (seroprevalence/risk) of 10% or a geometric mean titre/concentration (GMT) ratio of 1.5 or 2.0 in antibody levels is implicitly recommended for vaccine trials. We aimed to explore which NI margins were used in vaccine RCTs and how they were determined. A systematic search for NI vaccine RCTs yielded 177 eligible articles. Data were extracted from these articles using a standardized form and included general characteristics and characteristics specific for NI trials. Relations between the study characteristics and the NI margin used were explored. Among the 143 studies using an NI margin based on difference (n=136 on immunogenicity, n=2 on efficacy and n=5 on safety), 66% used a margin of 10%, 23% used margins lower than 10% (range 1-7.5%) and 11% used margins larger than 10% (range 11.5-25%). Of the 103 studies using a NI margin based on the GMT ratio, 50% used a margin of 0.67/1.5 and 49% used 0.5/2.0. As observed, 85% of the studies did not discuss the method of margin determination; and 19% of the studies lacked a confidence interval or p-value for non-inferiority. Most NI vaccine RCTs used an NI margin of 10% for difference or a GMT ratio of 1.5 or 2.0 without a clear rationale. Most articles presented enough information for the reader to make a judgement about the NI margin used and the conclusions. The reporting on the design, margins used and results of NI vaccine trials could be improved; more explicit guidelines may help to achieve this end. Copyright © 2015 Elsevier Ltd. All rights reserved.

SU-E-T-573: The Robustness of a Combined Margin Recipe for Uncertainties During Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stroom, J; Vieira, S; Greco, C

2014-06-01

Purpose: To investigate the variability of a safety margin recipe that combines CTV and PTV margins quadratically, with several tumor, treatment, and user related factors. Methods: Margin recipes were calculated by monte-carlo simulations in 5 steps. 1. A spherical tumor with or without isotropic microscopic was irradiated with a 5 field dose plan2. PTV: Geometric uncertainties were introduced using systematic (Sgeo) and random (sgeo) standard deviations. CTV: Microscopic disease distribution was modelled by semi-gaussian (Smicro) with varying number of islets (Ni)3. For a specific uncertainty set (Sgeo, sgeo, Smicro(Ni)), margins were varied until pre-defined decrease in TCP or dose coveragemore » was fulfilled. 4. First, margin recipes were calculated for each of the three uncertainties separately. CTV and PTV recipes were then combined quadratically to yield a final recipe M(Sgeo, sgeo, Smicro(Ni)).5. The final M was verified by simultaneous simulations of the uncertainties.Now, M has been calculated for various changing parameters like margin criteria, penumbra steepness, islet radio-sensitivity, dose conformity, and number of fractions. We subsequently investigated A: whether the combined recipe still holds in all these situations, and B: what the margin variation was in all these cases. Results: We found that the accuracy of the combined margin recipes remains on average within 1mm for all situations, confirming the correctness of the quadratic addition. Depending on the specific parameter, margin factors could change such that margins change over 50%. Especially margin recipes based on TCP-criteria are more sensitive to more parameters than those based on purely geometric Dmin-criteria. Interestingly, measures taken to minimize treatment field sizes (by e.g. optimizing dose conformity) are counteracted by the requirement of larger margins to get the same tumor coverage. Conclusion: Margin recipes combining geometric and microscopic uncertainties quadratically are accurate under varying circumstances. However margins can change up to 50% for different situations.« less

Hierarchical Marginal Land Assessment for Land Use Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kang, Shujiang; Post, Wilfred M; Wang, Dali

2013-01-01

Marginal land provides an alternative potential for food and bioenergy production in the face of limited land resources; however, effective assessment of marginal lands is not well addressed. Concerns over environmental risks, ecosystem services and sustainability for marginal land have been widely raised. The objective of this study was to develop a hierarchical marginal land assessment framework for land use planning and management. We first identified major land functions linking production, environment, ecosystem services and economics, and then classified land resources into four categories of marginal land using suitability and limitations associated with major management goals, including physically marginal land,more » biologically marginal land, environmental-ecological marginal land, and economically marginal land. We tested this assessment framework in south-western Michigan, USA. Our results indicated that this marginal land assessment framework can be potentially feasible on land use planning for food and bioenergy production, and balancing multiple goals of land use management. We also compared our results with marginal land assessment from the Conservation Reserve Program (CRP) and land capability classes (LCC) that are used in the US. The hierarchical assessment framework has advantages of quantitatively reflecting land functions and multiple concerns. This provides a foundation upon which focused studies can be identified in order to improve the assessment framework by quantifying high-resolution land functions associated with environment and ecosystem services as well as their criteria are needed to improve the assessment framework.« less

Assessment of a simple, novel endoluminal method for gastrotomy closure in NOTES.

PubMed

Lee, Sang Soo; Oelschlager, Brant K; Wright, Andrew S; Soares, Renato V; Sinan, Huseyin; Montenovo, Martin I; Hwang, Joo Ha

2011-10-01

A reliable method for gastrotomy closure in NOTES will be essential for NOTES to become viable clinically. However, methods using existing and widely available endoscopic accessories have been ineffective. The objective of this study was to evaluate the feasibility and safety of a new simple method for gastric closure (retracted clip-assisted loop closure) that uses existing endoscopic accessories with minor modifications. The retracted clip-assisted loop closure technique involves deploying 3-4 Resolution(®) clips (modified by attaching a 90-cm length of suture to the end of each clip) along the margin of the gastrotomy with one jaw on the serosal surface and the other jaw on the mucosal surface. The suture strings are threaded through an endoloop. Traction is then applied to the strings causing the gastric wall to tent. The endoloop is secured below the tip of the clips, completing a full-thickness gastrotomy closure. The main outcome measures were feasibility, efficacy, and safety of the new retracted clip-assisted loop closure technique for NOTES gastrotomy closure. An air-tight seal was achieved in 100% (n = 9) of stomachs. The mean leak pressure was 116.3 (±19.4) mmHg. The retracted clip-assisted loop closure technique can be used to perform NOTES gastrotomy closure by using existing endoscopic accessories with minor modifications.

Assessment of the Impact of Scheduled Postmarketing Safety Summary Analyses on Regulatory Actions

PubMed Central

Sekine, S; Pinnow, EE; Wu, E; Kurtzig, R; Hall, M; Dal Pan, GJ

2016-01-01

In addition to standard postmarketing drug safety monitoring, Section 915 of the Food and Drug Administration Amendments Act of 2007 (FDAAA) requires the US Food and Drug Administration (FDA) to conduct a summary analysis of adverse event reports to identify risks of a drug or biologic product 18 months after product approval, or after 10,000 patients have used the product, whichever is later. We assessed the extent to which these analyses identified new safety signals and resultant safety-related label changes. Among 458 newly approved products, 300 were the subjects of a scheduled analysis; a new safety signal that resulted in a safety-related label change was found for 11 of these products. Less than 2% of 713 safety-related label changes were based on the scheduled analyses. Our study suggests that the safety summary analyses provide only marginal value over other pharmacovigilance activities. PMID:26853718

Flight-determined stability analysis of multiple-input-multiple-output control systems

NASA Technical Reports Server (NTRS)

Burken, John J.

1992-01-01

Singular value analysis can give conservative stability margin results. Applying structure to the uncertainty can reduce this conservatism. This paper presents flight-determined stability margins for the X-29A lateral-directional, multiloop control system. These margins are compared with the predicted unscaled singular values and scaled structured singular values. The algorithm was further evaluated with flight data by changing the roll-rate-to-aileron command-feedback gain by +/- 20 percent. Minimum eigenvalues of the return difference matrix which bound the singular values are also presented. Extracting multiloop singular values from flight data and analyzing the feedback gain variations validates this technique as a measure of robustness. This analysis can be used for near-real-time flight monitoring and safety testing.

Flight-determined stability analysis of multiple-input-multiple-output control systems

NASA Technical Reports Server (NTRS)

Burken, John J.

1992-01-01

Singular value analysis can give conservative stability margin results. Applying structure to the uncertainty can reduce this conservatism. This paper presents flight-determined stability margins for the X-29A lateral-directional, multiloop control system. These margins are compared with the predicted unscaled singular values and scaled structured singular values. The algorithm was further evaluated with flight data by changing the roll-rate-to-aileron-command-feedback gain by +/- 20 percent. Also presented are the minimum eigenvalues of the return difference matrix which bound the singular values. Extracting multiloop singular values from flight data and analyzing the feedback gain variations validates this technique as a measure of robustness. This analysis can be used for near-real-time flight monitoring and safety testing.

Half forehead reconstruction with a single rotational scalp flap for dermatofibrosarcoma protuberans treatment.

PubMed

Mori, Stefano; Di Monta, Gianluca; Marone, Ugo; Chiofalo, Maria Grazia; Caracò, Corrado

2012-05-06

Dermatofibrosarcoma protuberans (DFSP) is a soft tissue neoplasm of intermediate to low-grade malignancy. Although metastasis rarely occurs, DFSP has a locally aggressive behavior with a high recurrence rate. In the head and neck area, resection involving a wide margin of healthy tissue can be difficult because of functional and cosmetic considerations. We describe a novel reconstructive method for half forehead defects with an innovative single local wide scalp flap following excision of DFSP with a 3 cm margin of healthy tissue. Two patients underwent wide resection of forehead DFSP and reconstruction with a single rotational scalp flap. The scalp flap blood supply was provided from three main vessels: the superficial temporal artery, occipital artery and posterior auricular artery. No early or late complications were observed in either patient with no local recurrence after 18 months of follow-up. The donor area could be closed primarily in both cases and the flaps survived completely. This innovative technique allowed a radical excision of forehead DFSP with sufficient healthy margins, thus potentially decreasing tumor recurrence rate. Reconstruction was achieved avoiding microsurgery, skin expanders and large skin grafts. Moreover, all main reconstructive criteria, such as functional and cosmetic tissue characteristics, were completely fulfilled.

Safety and Tolerability of HSC835 in Patients With Hematological Malignancies

ClinicalTrials.gov

2017-04-03

Acute Myelocytic Leukemia; Acute Lymphocytic Leukemia; Chronic Myelogenous Leukemia; Myelodysplastic Syndrome; Chronic Lymphocytic Leukemia; Marginal Zone Lymphoma; Follicular Lymphomas; Large-cell Lymphoma; Lymphoblastic Lymphoma; Burkitt's Lymphoma; High Grade Lymphomas; Mantle-cell Lymphoma; Lymphoplasmacytic Lymphoma

Methylation patterns in marginal zone lymphoma.

PubMed

Arribas, Alberto J; Bertoni, Francesco

Promoter DNA methylation is a major regulator of gene expression and transcription. The identification of methylation changes is important for understanding disease pathogenesis, for identifying prognostic markers and can drive novel therapeutic approaches. In this review we summarize the current knowledge regarding DNA methylation in MALT lymphoma, splenic marginal zone lymphoma, nodal marginal zone lymphoma. Despite important differences in the study design for different publications and the existence of a sole large and genome-wide methylation study for splenic marginal zone lymphoma, it is clear that DNA methylation plays an important role in marginal zone lymphomas, in which it contributes to the inactivation of tumor suppressors but also to the expression of genes sustaining tumor cell survival and proliferation. Existing preclinical data provide the rationale to target the methylation machinery in these disorders. Copyright © 2016 Elsevier Ltd. All rights reserved.

Oviposition substrate in Asian tiger mosquito surveillance: Do the sizes matter?

PubMed

Falsone, Luigi; Brianti, Emanuele; Severini, Francesco; Giannetto, Salvatore; Romi, Roberto

2015-12-01

Ovitraps are regarded as a reliable system to monitor Aedes albopictus dynamics. However, the dimensions of the oviposition substrate are not standardized, and no studies have investigated which should be the most effective sizes. In this study, the effect of paddle sizes in tiger mosquito egg collection was evaluated. Egg count and density on the wide surfaces and margins of different-sized oviposition substrates have been evaluated in two studies (A and B). In study A, a total of 29,995 Ae. albopictus eggs was counted in 250 classic oviposition substrates. Eggs were found on both wide surfaces (53.1%) and margins (46.9%). Egg density was significantly larger in margins compared to wide surfaces. Overall in study B, 983 Ae. albopictus eggs were collected. According to paddle sizes, 51.8% of eggs were on large and 48.2% on small paddles. Mean egg density of wide surfaces was significantly larger in small paddles (0.25 eggs/cm(2) ) compared to large paddles (0.06 eggs/cm(2) ). Results indicate that wider oviposition substrates do not mean larger number of Ae. albopictus eggs. Indeed, on paddles four times thinner than others, the number of eggs counted was not statistically different. These findings suggest that small paddles may be routinely employed in ovitraps, thus allowing savings of materials and money. © 2015 The Society for Vector Ecology.

47 CFR 63.53 - Form.

Code of Federal Regulations, 2011 CFR

2011-10-01

... FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) EXTENSION OF LINES, NEW... more than 35.6 cm (14 in) long with a left-hand margin of 4 cm (1.5 in). This requirement shall not... than 21.6 cm (8.5 in) wide and not more than 35.6 cm (14 in) long with a left-hand margin of 4 cm (1.5...

47 CFR 63.53 - Form.

Code of Federal Regulations, 2010 CFR

2010-10-01

... FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) EXTENSION OF LINES, NEW... more than 35.6 cm (14 in) long with a left-hand margin of 4 cm (1.5 in). This requirement shall not... than 21.6 cm (8.5 in) wide and not more than 35.6 cm (14 in) long with a left-hand margin of 4 cm (1.5...

Formation and evolution of magma-poor margins, an example of the West Iberia margin

NASA Astrophysics Data System (ADS)

Perez-Gussinye, Marta; Andres-Martinez, Miguel; Morgan, Jason P.; Ranero, Cesar R.; Reston, Tim

2016-04-01

The West Iberia-Newfoundland (WIM-NF) conjugate margins have been geophysically and geologically surveyed for the last 30 years and have arguably become a paradigm for magma-poor extensional margins. Here we present a coherent picture of the WIM-NF rift to drift evolution that emerges from these observations and numerical modeling, and point out important differences that may exist with other magma-poor margins world-wide. The WIM-NF is characterized by a continental crust that thins asymmetrically and a wide and symmetric continent-ocean transition (COT) interpreted to consist of exhumed and serpentinised mantle with magmatic products increasing oceanward. The architectural evolution of these margins is mainly dominated by cooling under very slow extension velocities (<~6 mm/yr half-rate) and a lower crust that most probably was not extremely weak at the start of rifting. These conditions lead to a system where initially deformation is distributed over a broad area and the upper, lower crust and lithosphere are decoupled. As extension progresses upper, lower, crust and mantle become tightly coupled and deformation localizes due to strengthening and cooling during rifting. Coupling leads to asymmetric asthenospheric uplift and weakening of the hanginwall of the active fault, where a new fault forms. This continued process leads to the formation of an array of sequential faults that dip and become younger oceanward. Here we show that these processes acting in concert: 1) reproduce the margin asymmetry observed at the WIM-NF, 2) explain the fault geometry evolution from planar, to listric to detachment like by having one common Andersonian framework, 3) lead to the symmetric exhumation of mantle with little magmatism, and 4) explain the younging of the syn-rift towards the basin centre and imply that unconformities separating syn- and post-rift may be diachronous and younger towards the ocean. Finally, we show that different lower crustal rheologies lead to different patterns of extension and to an abrupt transition to oceanic crust, even at magma-poor margins.

Towards intraoperative assessment of tumor margins in breast surgery using optical coherence elastography (Conference Presentation)

NASA Astrophysics Data System (ADS)

Kennedy, Brendan F.; Wijesinghe, Philip; Allen, Wes M.; Chin, Lixin; Latham, Bruce; Saunders, Christobel M.; Sampson, David D.

2016-03-01

Surgical excision of tumor is a critical factor in the management of breast cancer. The most common surgical procedure is breast-conserving surgery. The surgeon's goal is to remove the tumor and a rim of healthy tissue surrounding the tumor: the surgical margin. A major issue in breast-conserving surgery is the absence of a reliable tool to guide the surgeon in intraoperatively assessing the margin. A number of techniques have been proposed; however, the re-excision rate remains high and has been reported to be in the range 30-60%. New tools are needed to address this issue. Optical coherence elastography (OCE) shows promise as a tool for intraoperative tumor margin assessment in breast-conserving surgery. Further advances towards clinical translation are limited by long scan times and small fields of view. In particular, scanning over sufficient areas to assess the entire margin in an intraoperative timeframe has not been shown to be feasible. Here, we present a protocol allowing ~75% of the surgical margins to be assessed within 30 minutes. To achieve this, we have incorporated a 65 mm-diameter (internal), wide-aperture annular piezoelectric transducer, allowing the entire surface of the excised tumor mass to be automatically imaged in an OCT mosaic comprised of 10 × 10 mm tiles. As OCT is effective in identifying adipose tissue, our protocol uses the wide-field OCT to selectively guide subsequent local OCE scanning to regions of solid tissue which often present low contrast in OCT images. We present promising examples from freshly excised human breast tissue.

The Paget Trial: A Multicenter, Observational Cohort Intervention Study for the Clinical Efficacy, Safety, and Immunological Response of Topical 5% Imiquimod Cream for Vulvar Paget Disease

PubMed Central

Meeuwis, Kim; van Hees, Colette; van Dorst, Eleonora; Bulten, Johan; Bosse, Tjalling; IntHout, Joanna; Boll, Dorry; Slangen, Brigitte; van Seters, Manon; van Beurden, Marc; van Poelgeest, Mariëtte; de Hullu, Joanne

2017-01-01

Background Vulvar Paget disease is a rare skin disorder, which is most common in postmenopausal Caucasian women. They usually present with an erythematous plaque that may show fine or typical “cake icing” scaling or ulceration that may cause itching, pain, irritation, or a burning sensation. Although most cases are noninvasive, vulvar Paget disease may be invasive or associated with an underlying vulvar or distant adenocarcinoma. The histological evidence of so-called “Paget cells” with abundant pale cytoplasm in the epithelium confirms the diagnosis. The origin of these Paget cells is still unclear. Treatment of choice is wide local excision with negative margins. Obtaining clear surgical margins is challenging and may lead to extensive and mutilating surgery. Even then, recurrence rates are high, ranging from 15% to 70%, which emphasizes the need for new treatment options. A number of case reports, retrospective case series, and one observational study have shown promising results using the topical immune response modifier imiquimod. Objective This study aims to investigate the efficacy, safety, and immunological response in patients with noninvasive vulvar Paget disease using a standardized treatment schedule with 5% imiquimod cream. Methods Topical 5% imiquimod cream might be an effective and safe treatment alternative for vulvar Paget disease. The Paget Trial is a multicenter observational cohort study including eight tertiary referral hospitals in the Netherlands. It is ethically approved by the Medical-Ethical Committee of Arnhem-Nijmegen and registered in the Central Committee on Research Involving Human Subjects (CCMO) Register by as NL51648.091.14. Twenty patients with (recurrent) noninvasive vulvar Paget disease will be treated with topical 5% imiquimod cream three times a week for 16 weeks. The primary efficacy outcome is the reduction in lesion size at 12 weeks after end of treatment. Secondary outcomes are safety, immunological response, and quality of life. Safety will be assessed by evaluation of adverse events and tolerability of treatment. To evaluate the immunological response, various immunological markers will be tested on biopsy specimens taken before, during, and after treatment. Quality of life will be assessed with three questionnaires taken before, during, and after treatment. Results First results are expected in the summer of 2018. Trial Registration ClinicalTrials.gov NCT02385188; https://clinicaltrials.gov/ct2/show/NCT02385188 (Archived by WebCite at http://www.webcitation.org/6sXygHuhP). PMID:28877863

The influence of novel compliant floors on balance control in elderly women--A biomechanical study.

PubMed

Wright, Alexander D; Laing, Andrew C

2011-07-01

Novel compliant floors aim to decrease the risk for fall-related injury by providing substantial force attenuation during the impact phase of falls. Certain models of compliant flooring have been shown to have limited influence on postural sway and successful completion of dynamic balance tasks. However, the effects of these products on balance recovery mechanisms following an externally induced perturbation have yet to be quantified. We used a floor translation paradigm to induce a balance perturbation to thirteen elderly community-dwelling women. Outcome measures included the displacement rates and margins of safety for both the underfoot centre-of-pressure and whole-body centre-of-mass across two novel compliant floors (SmartCell, SofTile), two basic foam surfaces (Firm-Foam, Soft-Foam) and a standard 'Rigid' floor as a control condition. The centre-of-mass and centre-of-pressure margins of safety, and all centre-of-mass displacement rates, were not significantly lower for the two novel compliant flooring systems compared to the control floor. The centre-of-pressure displacement rates were similar to the control floor for the SmartCell floor condition. The majority of the margin of safety and displacement rate variables for the foam floors were significantly lower than the control condition. This study illustrates that the SmartCell and SofTile novel compliant floors have minimal influences on balance and balance control responses following externally induced perturbations in older community-dwelling women, and supports pilot installations of these floors to inform decisions regarding the development of clinical trials. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

The influence of novel compliant floors on balance control in elderly women—A biomechanical study

PubMed Central

Wright, Alexander D.; Laing, Andrew C.

2012-01-01

Novel compliant floors aim to decrease the risk for fall-related injury by providing substantial force attenuation during the impact phase of falls. Certain models of compliant flooring have been shown to have limited influence on postural sway and successful completion of dynamic balance tasks. However, the effects of these products on balance recovery mechanisms following an externally induced perturbation have yet to be quantified. We used a floor translation paradigm to induce a balance perturbation to thirteen elderly community-dwelling women. Outcome measures included the displacement rates and margins of safety for both the underfoot centre-of-pressure and whole-body centre-of-mass across two novel compliant floors (Smart-Cell, SofTile), two basic foam surfaces (Firm-Foam, Soft-Foam) and a standard ‘Rigid’ floor as a control condition. The centre-of-mass and centre-of-pressure margins of safety, and all centre-of-mass displacement rates, were not significantly lower for the two novel compliant flooring systems compared to the control floor. The centre-of-pressure displacement rates were similar to the control floor for the SmartCell floor condition. The majority of the margin of safety and displacement rate variables for the foam floors were significantly lower than the control condition. This study illustrates that the SmartCell and SofTile novel compliant floors have minimal influences on balance and balance control responses following externally induced perturbations in older community-dwelling women, and supports pilot installations of these floors to inform decisions regarding the development of clinical trials. PMID:21545881

Hydraulic safety margins and embolism reversal in stems and leaves: why are conifers and angiosperms so different?

PubMed

Johnson, Daniel M; McCulloh, Katherine A; Woodruff, David R; Meinzer, Frederick C

2012-10-01

Angiosperm and coniferous tree species utilize a continuum of hydraulic strategies. Hydraulic safety margins (defined as differences between naturally occurring xylem pressures and pressures that would cause hydraulic dysfunction, or differences between pressures resulting in loss of hydraulic function in adjacent organs (e.g., stems vs. leaves) tend to be much greater in conifers than angiosperms and serve to prevent stem embolism. However, conifers tend to experience embolism more frequently in leaves and roots than angiosperms. Embolism repair is thought to occur by active transport of sugars into empty conduits followed by passive water movement. The most likely source of sugar for refilling is from nonstructural carbohydrate depolymerization in nearby parenchyma cells. Compared to angiosperms, conifers tend to have little parenchyma or nonstructural carbohydrates in their wood. The ability to rapidly repair embolisms may rely on having nearby parenchyma cells, which could explain the need for greater safety margins in conifer wood as compared to angiosperms. The frequent embolisms that occur in the distal portions of conifers are readily repaired, perhaps due to the abundant parenchyma in leaves and roots, and these distal tissues may act as hydraulic circuit breakers that prevent tension-induced embolisms in the attached stems. Frequent embolisms in conifer leaves may also be due to weaker stomatal response to changes in ambient humidity. Although there is a continuum of hydraulic strategies among woody plants, there appear to be two distinct 'behaviors' at the extremes: (1) embolism prevention and (2) embolism occurrence and subsequent repair. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Lateral spread of heat during thyroidectomy using different haemostatic devices.

PubMed

Adamczewski, Zbigniew; Król, Aleksander; Kałużna-Markowska, Karolina; Brzeziński, Jan; Lewiński, Andrzej; Dedecjus, Marek

2015-01-01

The presented study is an attempt to comprehensively analyze the lateral spread of heat during thyroidectomy. Obtained results may be valuable in other surgical disciplines in which thermal analysis is difficult or impossible. The aim of the study was to evaluate the temperature distribution in the operating field during thyroidectomy performed with the use of modern haemostatic instruments, and to define the safety margin for the investigated devices. Ninety-three patients were thyroidectomised due to thyroid neoplasm. During all the operations the thermovisual measurements were carried out along with continuous intraoperative neuromonitoring of the recurrent laryngeal nerve (CIONM). Investigated patients were divided into 5 groups, named according to the applied haemostatic technique: LigaSure (N=17); ThermoStapler (N=20); Focus (N=19); SonoSurg (N=17) and Monopolar (N=20). At maximal performance settings, the highest working temperature was observed for the ThermoStapler, while the lowest temperature was recorded for the Monopolar. Safety margin and working time were increased in Focus and SonoSurg, compared to LigaSure and ThermoStapler. The differences in the necrosis thickness were negligible. The largest distance of the midline of the active blade from isotherm of 42ºC observed in the study was 5.51 mm; none of investigated devices used at a bigger distance had influence on the morphology of the electric signal of CIONM. The thermo-visual camera allows non-invasive, safe, and real-time monitoring and analysis of temperature distribution in the operation area during thyroidectomy. Proposed minimal safety margin for the analysed devices is 5.51 mm.

Wide adaptation of Green Revolution wheat: international roots and the Indian context of a new plant breeding ideal, 1960-1970.

PubMed

Baranski, Marci R

2015-04-01

Indian wheat cultivation changed radically in the 1960s due to new technologies and policy reforms introduced during the Green Revolution, and farmers' adoption of 'packages' of modern seeds, fertilizer, and irrigation. Just prior to the Green Revolution, Indian scientists adopted a new plant breeding philosophy--that varieties should have as wide an adaptation as possible, meaning high and stable yields across different environments. But scientists also argued that wide adaptation could be achieved by selecting only plants that did well in high fertility and irrigated environments. Scientists claimed that widely adapted varieties still produce high yields in marginal areas. Many people have criticized the Green Revolution for its unequal spread of benefits, but none of these critiques address wide adaptation-the core tenant held by Indian agricultural scientists to justify their focus on highly productive land while ignoring marginal or rainfed agriculture. This paper also describes Norman Borlaug's and the Rockefeller Foundation's research program in wide adaptation, Borlaug's involvement in the Indian wheat program, and internal debates about wide adaptation and selection under ideal conditions among Indian scientists. It argues that scientists leveraged the concept of wide adaptation to justify a particular regime of research focused on high production agriculture. Copyright © 2015 Elsevier Ltd. All rights reserved.

Divergent Hydraulic Safety Strategies in Three Co-occurring Anacardiaceae Tree Species in a Chinese Savanna.

PubMed

Zhang, Shu-Bin; Zhang, Jiao-Lin; Cao, Kun-Fang

2016-01-01

Vulnerability segmentation, the condition under which plant leaves are more vulnerable to drought-induced cavitation than stems, may act as a "safety valve" to protect stems from hydraulic failure. Evergreen, winter-deciduous, and drought-deciduous tree species co-occur in tropical savannas, but there have been no direct studies on the role of vulnerability segmentation and stomatal regulation in maintaining hydraulic safety in trees with these three leaf phenologies. To this end, we selected three Anacardiaceae tree species co-occurring in a Chinese savanna, evergreen Pistacia weinmanniifolia , drought-deciduous Terminthia paniculata , and winter-deciduous Lannea coromandelica , to study inter-species differentiation in leaf and stem hydraulic safety. We found that the two deciduous species had significantly higher sapwood-specific hydraulic conductivity and leaf-specific hydraulic conductance than the evergreen species. Moreover, two deciduous species were more vulnerable to stem cavitation than the evergreen species, although both drought-deciduous species and evergreen species had drought-resistance leaves. The evergreen species maintained a wide hydraulic safety margin (HSM) in stems and leaves; which was achieved by embolism resistance of both stems and leaves and isohydric stomatal control. Both deciduous species had limited HSMs in stems and leaves, being isohydric in the winter-deciduous species and anisohydric in drought-deciduous species. The difference in water potential at 50% loss of hydraulic conductivity between the leaves and the terminal stems (P50 leaf-stem ) was positive in P. weinmanniifolia and L. coromandelica , whereas, T. paniculata exhibited a lack of vulnerability segmentation. In addition, differences in hydraulic architecture were found to be closely related to other structural traits, i.e., leaf mass per area, wood density, and sapwood anatomy. Overall, the winter-deciduous species exhibits a drought-avoidance strategy that maintains the hydraulic safety of the more carbon-costly stems by sacrificing cheaper and more vulnerable leaves, while the evergreen species exhibits a hydraulic strategy of drought tolerance with strong stomatal regulation. In contrast, the drought-deciduous species lacks vulnerability segmentation and sheds leaves at the expense of top shoots during peak drought. This study demonstrates that even sympatric tree species that differ in leaf phenology can exhibit divergent adaptive hydraulic safety strategies.

RISMC Toolkit and Methodology Research and Development Plan for External Hazards Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Justin Leigh

This report includes the description and development plan for a Risk Informed Safety Margins Characterization (RISMC) toolkit and methodology that will evaluate multihazard risk in an integrated manner to support the operating nuclear fleet.

Staged marginal contoured and central excision technique in the surgical management of perianal Paget's disease.

PubMed

Möller, Mecker G; Lugo-Baruqui, Jose Alejandro; Milikowski, Clara; Salgado, Christopher J

2014-04-01

Extramammary Paget's disease (EMPD) is an adenocarcinoma of the apocrine glands with unknown exact prevalence and obscure etiology. It has been divided into primary EMPD and secondary EMPD, in which an internal malignancy is usually associated. Treatment for primary EMPD usually consists of wide lesion excision with negative margins. Multiple methods have been proposed to obtain free-margin status of the disease. These include visible border lesion excision, punch biopsies, and micrographic and frozen-section surgery, with different results but still high recurrence rates. The investigators propose a method consisting of a staged contoured marginal excision using "en face" permanent pathologic analysis preceding the steps of central excision of the lesion and the final reconstruction of the surgical defect. Advantages of this method include adequate margin control allowing final reconstruction and tissue preservation, while minimizing patient discomfort. The staged contoured marginal and central excision technique offers a new alternative to the armamentarium for surgical oncologists for the management of EMPD in which margin control is imperative for control of recurrence rates. Copyright © 2014 Elsevier Inc. All rights reserved.

Opening of the Central Atlantic Ocean: Implications for Geometric Rifting and Asymmetric Initial Seafloor Spreading after Continental Breakup

NASA Astrophysics Data System (ADS)

Klingelhoefer, F.; Biari, Y.; Sahabi, M.; Funck, T.; Benabdellouahed, M.; Schnabel, M.; Reichert, C. J.; Gutscher, M. A.; Bronner, A.; Austin, J. A., Jr.

2017-12-01

The structure of conjugate passive margins provides information about rifting styles, the initial phases of the opening of an ocean and the formation of its associated sedimentary basins. The study of the deep structure of conjugate passive continental margins combined with precise plate kinematic reconstructions can provide constraints on the mechanisms of rifting and formation of initial oceanic crust. In this study the Central Atlantic conjugate margins are compared, based on compilation of wide-angle seismic profiles from the NW-Africa Nova Scotian and US passive margins. Plate cinematic reconstructions were used to place the profiles in the position at opening and at the M25 magnetic anomaly. The patterns of volcanism, crustal thickness, geometry, and seismic velocities in the transition zone. suggest symmetric rifting followed by asymmetric oceanic crustal accretion. Conjugate profiles in the southern Central Atlantic image differences in the continental crustal thickness. While profiles on the eastern US margin are characterized by thick layers of magmatic underplating, no such underplate was imaged along the NW-African continental margin. It has been proposed that these volcanic products form part of the CAMP (Central Atlantic Magmatic Province). In the north, two wide-angle seismic profiles acquired in exactly conjugate positions show that the crustal geometry of the unthinned continental crust and the necking zone are nearly symmetric. A region including seismic velocities too high to be explained by either continental or oceanic crust is imaged along the Nova Scotia margin off Eastern Canada, corresponding on the African side to an oceanic crust with slightly elevated velocities. These might result from asymmetric spreading creating seafloor by faulting the existing lithosphere on the Canadian side and the emplacement of magmatic oceanic crust including pockets of serpentinite on the Moroccan margin. A slightly elevated crustal thickness along the African margin can be explained by the influence of the Canary hotspot between 60 and 30 Ma in the study region. After isochron M25, a large-scale plate reorganization may then have led to an increase in spreading velocity and the production of a more typical but thin magmatic crust on both sides.

Harnessing the Power of Light to See and Treat Breast Cancer

DTIC Science & Technology

2014-10-01

effect of novel therapeutic agents in vivo. 15. SUBJECT TERMS optical spectroscopy, imaging , fiber-optic, molecular, screening, breast cancer 16...therapeutic agents in vivo. a. Original Statement of Work for 5 Years Aim 1: Optical imaging of margin morphology on breast lumpectomy specimens: To...evaluate the role of wide-field imaging (coverage) and high-resolution interrogation (localization) of breast margin morphology to guide surgical

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gougar, Hans

This document outlines the development of a high fidelity, best estimate nuclear power plant severe transient simulation capability that will complement or enhance the integral system codes historically used for licensing and analysis of severe accidents. As with other tools in the Risk Informed Safety Margin Characterization (RISMC) Toolkit, the ultimate user of Enhanced Severe Transient Analysis and Prevention (ESTAP) capability is the plant decision-maker; the deliverable to that customer is a modern, simulation-based safety analysis capability, applicable to a much broader class of safety issues than is traditional Light Water Reactor (LWR) licensing analysis. Currently, the RISMC pathway’s majormore » emphasis is placed on developing RELAP-7, a next-generation safety analysis code, and on showing how to use RELAP-7 to analyze margin from a modern point of view: that is, by characterizing margin in terms of the probabilistic spectra of the “loads” applied to systems, structures, and components (SSCs), and the “capacity” of those SSCs to resist those loads without failing. The first objective of the ESTAP task, and the focus of one task of this effort, is to augment RELAP-7 analyses with user-selected multi-dimensional, multi-phase models of specific plant components to simulate complex phenomena that may lead to, or exacerbate, severe transients and core damage. Such phenomena include: coolant crossflow between PWR assemblies during a severe reactivity transient, stratified single or two-phase coolant flow in primary coolant piping, inhomogeneous mixing of emergency coolant water or boric acid with hot primary coolant, and water hammer. These are well-documented phenomena associated with plant transients but that are generally not captured in system codes. They are, however, generally limited to specific components, structures, and operating conditions. The second ESTAP task is to similarly augment a severe (post-core damage) accident integral analyses code with high fidelity simulations that would allow investigation of multi-dimensional, multi-phase containment phenomena that are only treated approximately in established codes.« less

Sea-level-induced seismicity and submarine landslide occurrence

USGS Publications Warehouse

Brothers, Daniel S.; Luttrell, Karen M.; Chaytor, Jason D.

2013-01-01

The temporal coincidence between rapid late Pleistocene sea-level rise and large-scale slope failures is widely documented. Nevertheless, the physical mechanisms that link these phenomena are poorly understood, particularly along nonglaciated margins. Here we investigate the causal relationships between rapid sea-level rise, flexural stress loading, and increased seismicity rates along passive margins. We find that Coulomb failure stress across fault systems of passive continental margins may have increased more than 1 MPa during rapid late Pleistocene–early Holocene sea-level rise, an amount sufficient to trigger fault reactivation and rupture. These results suggest that sea-level–modulated seismicity may have contributed to a number of poorly understood but widely observed phenomena, including (1) increased frequency of large-scale submarine landslides during rapid, late Pleistocene sea-level rise; (2) emplacement of coarse-grained mass transport deposits on deep-sea fans during the early stages of marine transgression; and (3) the unroofing and release of methane gas sequestered in continental slope sediments.

Evaluation of Margins of Safety in Brazed Joints

NASA Technical Reports Server (NTRS)

Flom, Yury; Wang, Len; Powell, Mollie M.; Soffa, Matthew A.; Rommel, Monica L.

2009-01-01

One of the essential steps in assuring reliable performance of high cost critical brazed structures is the assessment of the Margin of Safety (MS) of the brazed joints. In many cases the experimental determination of the failure loads by destructive testing of the brazed assembly is not practical and cost prohibitive. In such cases the evaluation of the MS is performed analytically by comparing the maximum design loads with the allowable ones and incorporating various safety or knock down factors imposed by the customer. Unfortunately, an industry standard methodology for the design and analysis of brazed joints has not been developed. This paper provides an example of an approach that was used to analyze an AlBeMet 162 (38%Be-62%Al) structure brazed with the AWS BAlSi-4 (Al-12%Si) filler metal. A practical and conservative interaction equation combining shear and tensile allowables was developed and validated to evaluate an acceptable (safe) combination of tensile and shear stresses acting in the brazed joint. These allowables are obtained from testing of standard tensile and lap shear brazed specimens. The proposed equation enables the assessment of the load carrying capability of complex brazed joints subjected to multi-axial loading.

Using translational medicine to understand clinical differences between botulinum toxin formulations.

PubMed

Aoki, K R; Ranoux, D; Wissel, J

2006-12-01

When using botulinum toxin-based products, the physician must decide the optimal location and dose required to alleviate symptoms and improve the patient's quality of life. To deliver effective treatment, the physician needs to understand the importance of accurate target muscle selection and localization and the implications of each product's migration properties when diluted in different volumes. Pre-clinical mouse models of efficacy and safety have been utilized to compare local and distal muscle relaxation effects following defined intramuscular administration. Data from the model allow the products to be ranked based on their propensity for local efficacy versus their distal migration properties. Using standardized dilutions, the non-parallel dose-response curves for the various formulations demonstrate that they have different efficacy profiles. Distal effects were also noted at different treatment doses, which are reflected in the different safety and/or therapeutic margins. Based on these pre-clinical data, the safety and therapeutic margin rankings are ordered, largest to smallest, as BOTOX, Dysport and Myobloc. The results of subsequent clinical trials are variable and dose comparisons are inconclusive, thus supporting the regulatory position that the dose units of the individual preparations are unique and cannot be simply converted between products.

Tumor response and negative distal resection margins of rectal cancer after hyperthermochemoradiation therapy.

PubMed

Tsutsumi, Soichi; Tabe, Yuichi; Fujii, Takaaki; Yamaguchi, Satoru; Suto, Toshinaga; Yajima, Reina; Morita, Hiroki; Kato, Toshihide; Shioya, Mariko; Saito, Jun-Ichi; Asao, Takayuki; Nakano, Takashi; Kuwano, Hiroyuki

2011-11-01

The safety of regional hyperthermia has been tested in locally advanced rectal cancer. The aim of this study was to assess the effects of shorter distal margins on local control and survival in rectal cancer patients who were treated with preoperative hyperthermochemoradiation therapy (HCRT) and underwent rectal resection by using the total mesorectal excision (TME) method. Ninety-three patients with rectal adenocarcinoma who received neoadjuvant HCRT (total radiation: 50 Gy) were included in this study. Surgery was performed 8 weeks after HCRT, and each resected specimen was evaluated histologically. Length of distal surgical margins, status of circumferential margins, pathological response, and tumor node metastasis stage were examined for their effects on recurrence and survival. Fifty-eight (62.4%) patients had tumor regression, and 20 (21.5%) had a pathological complete response. Distal margin length ranged from 1 to 55 mm (median, 21 mm) and did not correlate with local recurrence (p=0.57) or survival (p=0.75) by univariate analysis. Kaplan-Meier estimates of recurrence-free survival and local recurrence for the <10 mm versus ≥10 mm groups were not significantly different. Positive circumferential margins and failure of tumors to respond were unfavorable factors in survival. Distal resection margins that are shorter than 10 mm but are not positive appear to be equivalent to longer margins in patients who undergo HCRT followed by rectal resection with TME. To improve the down-staging rate, additional studies are needed.

Comparison of histologic margin status in low-grade cutaneous and subcutaneous canine mast cell tumours examined by radial and tangential sections.

PubMed

Dores, C B; Milovancev, M; Russell, D S

2018-03-01

Radial sections are widely used to estimate adequacy of excision in canine cutaneous mast cell tumours (MCTs); however, this sectioning technique estimates only a small fraction of total margin circumference. This study aimed to compare histologic margin status in grade II/low grade MCTs sectioned using both radial and tangential sectioning techniques. A total of 43 circumferential margins were evaluated from 21 different tumours. Margins were first sectioned radially, followed by tangential sections. Tissues were examined by routine histopathology. Tangential margin status differed in 10 of 43 (23.3%) margins compared with their initial status on radial section. Of 39 margins, 9 (23.1%) categorized as histologic tumour-free margin (HTFM) >0 mm were positive on tangential sectioning. Tangential sections detected a significantly higher proportion of positive margins relative to radial sections (exact 2-tailed P-value = .0215). The HTFM was significantly longer in negative tangential margins than positive tangential margins (mean 10.1 vs 3.2 mm; P = .0008). A receiver operating characteristic curve comparing HTFM and tangentially negative margins found an area under the curve of 0.83 (95% confidence interval: 0.71-0.96). Although correct classification peaked at the sixth cut-point of HTFM ≥1 mm, radial sections still incorrectly classified 50% of margins as lacking tumour cells. Radial sections had 100% specificity for predicting negative tangential margins at a cut-point of 10.9 mm. These data indicate that for low grade MCTs, HTFMs >0 mm should not be considered completely excised, particularly when HTFM is <10.9 mm. This will inform future studies that use HTFM and overall excisional status as dependent variables in multivariable prognostic models. © 2017 John Wiley & Sons Ltd.

Safety and Suitability for Service Assessment Testing for Surface and Underwater Launched Munitions

DTIC Science & Technology

2014-12-05

test efficiency that tend to associate the Analytical S3 Test Approach with large, complex munition systems and the Empirical S3 Test Approach with...the smaller, less complex munition systems . 8.1 ANALYTICAL S3 TEST APPROACH. The Analytical S3 test approach, as shown in Figure 3, evaluates...assets than the Analytical S3 Test approach to establish the safety margin of the system . This approach is generally applicable to small munitions

10 CFR 72.122 - Overall requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... natural phenomena. (1) Structures, systems, and components important to safety must be designed to... effects of natural phenomena such as earthquakes, tornadoes, lightning, hurricanes, floods, tsunami, and... severe of the natural phenomena reported for the site and surrounding area, with appropriate margins to...

14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...

14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...

Multiphysics Object-Oriented Simulation Environment (MOOSE)

ScienceCinema

None

2017-12-09

Nuclear reactor operators can expand safety margins with more precise information about how materials behave inside operating reactors. INL's new simulation platform makes such studies easier & more informative by letting researchers "plug-n-play" their mathematical models, skipping years of computer code development.

Reliability-based evaluation of bridge components for consistent safety margins.

DOT National Transportation Integrated Search

2010-10-01

The Load and Resistant Factor Design (LRFD) approach is based on the concept of structural reliability. The approach is more : rational than the former design approaches such as Load Factor Design or Allowable Stress Design. The LRFD Specification fo...

Co-occurring woody species have diverse hydraulic strategies and mortality rates during an extreme drought.

PubMed

Johnson, Daniel M; Domec, Jean-Christophe; Carter Berry, Z; Schwantes, Amanda M; McCulloh, Katherine A; Woodruff, David R; Wayne Polley, H; Wortemann, Remí; Swenson, Jennifer J; Scott Mackay, D; McDowell, Nate G; Jackson, Robert B

2018-03-01

From 2011 to 2013, Texas experienced its worst drought in recorded history. This event provided a unique natural experiment to assess species-specific responses to extreme drought and mortality of four co-occurring woody species: Quercus fusiformis, Diospyros texana, Prosopis glandulosa, and Juniperus ashei. We examined hypothesized mechanisms that could promote these species' diverse mortality patterns using postdrought measurements on surviving trees coupled to retrospective process modelling. The species exhibited a wide range of gas exchange responses, hydraulic strategies, and mortality rates. Multiple proposed indices of mortality mechanisms were inconsistent with the observed mortality patterns across species, including measures of the degree of iso/anisohydry, photosynthesis, carbohydrate depletion, and hydraulic safety margins. Large losses of spring and summer whole-tree conductance (driven by belowground losses of conductance) and shallower rooting depths were associated with species that exhibited greater mortality. Based on this retrospective analysis, we suggest that species more vulnerable to drought were more likely to have succumbed to hydraulic failure belowground. © 2018 John Wiley & Sons Ltd.

Aeroelasticity matters: Some reflections on two decades of testing in the NASA Langley transonic dynamics tunnel

NASA Technical Reports Server (NTRS)

Reed, W. H., III

1981-01-01

Testing of wind-tunnel aeroelastic models is a well established, widely used means of studying flutter trends, validating theory and investigating flutter margins of safety of new vehicle designs. The Langley Transonic Dynamics Tunnel was designed specifically for work on dynamics and aeroelastic problems of aircraft and space vehicles. A cross section of aeroelastic research and testing in the facility since it became operational more than two decades ago is presented. Examples selected from a large store of experience illustrate the nature and purpose of some major areas of work performed in the tunnel. These areas include: specialized experimental techniques; development testing of new aircraft and launch vehicle designs; evaluation of proposed "fixes" to solve aeroelastic problems uncovered during development testing; study of unexpected aeroelastic phenomena (i.e., "surprises"); control of aeroelastic effects by active and passive means; and, finally, fundamental research involving measurement of unsteady pressures on oscillating wings and control surface.

Biosonar behaviour of free-ranging porpoises.

PubMed

Akamatsu, Tomonari; Wang, Ding; Wang, Kexiong; Naito, Yasuhiko

2005-04-22

Detecting objects in their paths is a fundamental perceptional function of moving organisms. Potential risks and rewards, such as prey, predators, conspecifics or non-biological obstacles, must be detected so that an animal can modify its behaviour accordingly. However, to date few studies have considered how animals in the wild focus their attention. Dolphins and porpoises are known to actively use sonar or echolocation. A newly developed miniature data logger attached to a porpoise allows for individual recording of acoustical search efforts and inspection distance based on echolocation. In this study, we analysed the biosonar behaviour of eight free-ranging finless porpoises (Neophocaena phocaenoides) and demonstrated that these animals inspect the area ahead of them before swimming silently into it. The porpoises inspected distances up to 77 m, whereas their swimming distance without using sonar was less than 20 m. The inspection distance was long enough to ensure a wide safety margin before facing real risks or rewards. Once a potential prey item was detected, porpoises adjusted their inspection distance from the remote target throughout their approach.

Industry Application ECCS / LOCA Integrated Cladding/Emergency Core Cooling System Performance: Demonstration of LOTUS-Baseline Coupled Analysis of the South Texas Plant Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Hongbin; Szilard, Ronaldo; Epiney, Aaron

Under the auspices of the DOE LWRS Program RISMC Industry Application ECCS/LOCA, INL has engaged staff from both South Texas Project (STP) and the Texas A&M University (TAMU) to produce a generic pressurized water reactor (PWR) model including reactor core, clad/fuel design and systems thermal hydraulics based on the South Texas Project (STP) nuclear power plant, a 4-Loop Westinghouse PWR. A RISMC toolkit, named LOCA Toolkit for the U.S. (LOTUS), has been developed for use in this generic PWR plant model to assess safety margins for the proposed NRC 10 CFR 50.46c rule, Emergency Core Cooling System (ECCS) performance duringmore » LOCA. This demonstration includes coupled analysis of core design, fuel design, thermalhydraulics and systems analysis, using advanced risk analysis tools and methods to investigate a wide range of results. Within this context, a multi-physics best estimate plus uncertainty (MPBEPU) methodology framework is proposed.« less

Levetiracetam induced acute reversible psychosis in a patient with uncontrolled seizures

PubMed Central

Kumar, Nithin; Swaroop, H. S.; Chakraborty, Ananya; Chandran, Suhas

2014-01-01

Levetiracetam (LEV) is a relatively newer antiepileptic drug with novel mechanism of action. It was introduced to the market in the year 2000. Pre-marketing clinical trials of the drug reported good tolerability with a wide safety margin. On post-marketing updates, there are few reports of psychosis after treatment with the drug. Here, we report a case of 52-year-old epileptic man who developed acute, reversible psychosis within 3 days of initiation of treatment. The drug was prescribed at a dose of 500 mg per day. After 3 days of treatment, the patient developed visual hallucinations, mood swings, withdrawal and suspicious behavior. Delirium was ruled out as there was no fluctuation in his sensorium or focal neurological deficits. His lab investigations for electrolytes, renal function test, thyroid, liver function and other related tests levels were within normal limits. A diagnosis of LEV induced psychosis was reached based on clinical judgment and causality assessment. PMID:25298593

Triazole incorporated thiazoles as a new class of anticonvulsants: design, synthesis and in vivo screening.

PubMed

Siddiqui, Nadeem; Ahsan, Waquar

2010-04-01

Various 3-[4-(substituted phenyl)-1,3-thiazol-2-ylamino]-4-(substituted phenyl)-4,5-dihydro-1H-1,2,4-triazole-5-thiones (7a-t) were designed keeping in view the structural requirements suggested in the pharmacophore model for anticonvulsant activity. Thiazole and triazole moieties being anticonvulsants were clubbed together to get the titled compounds and their in vivo anticonvulsant screening were performed by two most adopted seizure models, maximal electroshock seizure (MES) and subcutaneous pentylenetetrazole (scPTZ). Two compounds 7d and 7f showed significant anticonvulsant activity in both the screens with ED(50) values 23.9 mg/kg and 13.4 mg/kg respectively in MES screen and 178.6 mg/kg and 81.6 mg/kg respectively in scPTZ test. They displayed a wide margin of safety with Protective index (PI), median hypnotic dose (HD(50)) and median lethal dose (LD(50)) much higher than the standard drugs. Copyright (c) 2010 Elsevier Masson SAS. All rights reserved.

Wide-field optical coherence elastography for intraoperative assessment of tumour margins in breast cancer (Conference Presentation)

NASA Astrophysics Data System (ADS)

Allen, Wes M.; Chin, Lixin; Sampson, David D.; Kennedy, Brendan F.

2016-03-01

Incomplete excision of tumour margins is a major issue in breast-conserving surgery. Currently 20 - 60% of cases require a second surgical procedure required as a result of cancer recurrence. A number of techniques have been proposed to assess margin status, including frozen section analysis and imprint cytology. However, the recurrence rate after using these techniques remains very high. Over the last several years, our group has been developing optical coherence elastography (OCE) as a tool for the intraoperative assessment of tumour margins in breast cancer. We have reported a feasibility study on 65 ex vivo samples from patients undergoing mastectomy or wide local excision demonstrates the potential of OCE in differentiating benign from malignant tissue. In this study, malignant tissue was readily distinguished from surrounding relative tissue by a distinctive heterogeneous pattern in micro-elastograms. To date the largest field of view for a micro-elastogram is 20 x 20mm, however, lumpectomy samples are typically ~50 x 50 x 30mm. For OCE to progress as a useful clinical tool, elastograms must be acquired over larger areas to allow a greater portion of the surface area of lumpectomies to be assessed. Here, we propose a wide-field OCE scanner that utilizes a piezoelectric transducer with an internal diameter of 65mm. In this approach partially overlapped elastograms are stitched together forming a mosaic with overall dimensions of 50 x 50mm in a total acquisition time of 15 - 30 minutes. We present results using this approach on both tissue-mimicking phantoms and tissue, and discuss prospects for shorter acquisitions times.

Evaluation of safety effectiveness of composite shoulders, wide unpaved shoulders, and wide paved shoulders in Kansas.

DOT National Transportation Integrated Search

2013-03-01

Incremental increases in paved shoulder widths have been studied and are shown in the Highway Safety Manual. While : each incremental increase in shoulder width is beneficial, there is evidence that suggests the relationship between safety : improvem...

Assessing the Safety of Expanded Polytetrafluoroethylene Synthetic Grafts in Living Donor Liver Transplantation: Graft Migration Into Hollow Viscous Organs - Diagnosis and Treatment Options.

PubMed

Hsu, Shih-Chao; Thorat, Ashok; Yang, Horng-Ren; Poon, Kin-Shing; Li, Ping-Chun; Yeh, Chun-Chieh; Chen, Te-Hung; Jeng, Long-Bin

2017-07-06

BACKGROUND Our recent studies have highlighted the importance and safety of backtable venoplasty for middle hepatic vein (MHV) and inferior right hepatic veins (IRHV) reconstruction using expanded polytetrafluoroethylene (ePTFE) vascular grafts. In this study, we aim to analyze the complications associated with ePTFE graft use and discuss the management of the rare, but, potentially life threatening complications directly related to ePTFE conduits. MATERIAL AND METHODS From January 2012 to October 2015 a total of 397 patients underwent living donor liver transplantation (LDLT). The ePTFE vascular grafts were used during the backtable venoplasty for outflow reconstruction in 262 of the liver allografts. Recipients who developed ePTFE-related complications were analyzed. RESULTS ePTFE-related complications developed in 1.52% (4/262) of the patients. One patient (0.38%) developed complete thrombosis with sepsis at 24 months post-transplantation and died due to multiorgan failure. Three patients (1.1%) developed graft migration into the second portion of the duodenum, without overt peritonitis. Surgical exploration and ePTFE graft removal was done in all the patients. One patient died due to overwhelming sepsis. CONCLUSIONS ePTFE graft migration into the duodenum causing perforation is a new set of complications that has been recently described in LDLT and can be treated effectively by surgical removal of the infected vascular graft and duodenal perforation closure. Despite of such complications, in our experience, ePTFE use in LDLT continues to have wide safety margin, with a complication rate of only 1.52%.

Safety of formalin treatments on warm- and coolwater fish eggs

USGS Publications Warehouse

Rach, Jeff J.; Howe, George E.; Schreier, Theresa M.

1997-01-01

Formalin is widely used for treating fungal infections of fish eggs in intensive aquaculture operations. The use of formalin in the United States is only allowed on salmonid and esocid eggs unless a special exemption is granted for use on other species. This study was conducted to determine the safety of formalin treatments on eggs of representative warm- and coolwater fish species and data was used to support a request to allow the use of formalin on the eggs of warmwater and additional coolwater fish species. Non-eyed eggs of walleye (Stizostedion vitreum), common carp (Cyprinus carpio), white sucker (Catostomus commersoni), channel catfish (Ictalurus punctatus), and lake sturgeon (Acipenser fulvescens) were cultured in miniature egg hatching jars and treated for 45 min every-other-day with 1500, 4500, or 7500 μL L-1 formalin up to hatch. For all species tested, the percent hatch was greater in 1500 mu L L-1 treatment groups than in untreated controls. Walleye eggs were the least sensitive species and had a hatch of 87% in the 7500 mu L L-1 treatment. Lake sturgeon were the most sensitive species with a mean hatch of 54% in 1500 mu L L-1 treatments. Adequate margins of safety exist for standard treatments (1500 mu L L-1 for 15 min) on eggs of all species tested except lake sturgeon. Fungal infections drastically reduced or eliminated hatch in most control groups whereas most treated groups were free of infections. This confirms the efficacy of formalin as an fungicide. Published by Elsevier Science B.V.

The learning curve of laparoscopic treatment of rectal cancer does not increase morbidity.

PubMed

Luján, Juan; Gonzalez, Antonio; Abrisqueta, Jesús; Hernandez, Quiteria; Valero, Graciela; Abellán, Israel; Frutos, María Dolores; Parrilla, Pascual

2014-01-01

The treatment of rectal cancer via laparoscopy is controversial due to its technical complexity. Several randomized prospective studies have demonstrated clear advantages for the patient with similar oncological results to those of open surgery, although during the learning of this surgical technique there may be an increase in complications and a worse prognosis. Our aim is to analyze how the learning curve for rectal cancer via laparoscopy influences intra- and postoperative results and oncological markers. A retrospective review was conducted of the first 120 patients undergoing laparoscopic surgery for rectal neoplasia. The operations were performed by the same surgical team with a wide experience in the treatment of open colorectal cancer and qualified to perform advanced laparoscopic surgery. We analyzed sex, ASA, tumour location, neoadjuvant treatment, surgical technique, operating time, conversion, postoperative complications, length of hospital stay, number of lymph nodes, stage and involvement of margins. Significant differences were observed with regard to surgical time (224 min in the first group, 204 min in the second group), with a higher rate of conversion in the first group (22.5%) than in the second (11.3%). No significant differences were noted for rate of conservative sphincter surgery, length of hospital stay, post-surgical complications, number of affected/isolated lymph nodes or affected circumferential and distal margins. It is possible to learn this complex surgical technique without compromising the patient's safety and oncological outcome. Copyright © 2013 AEC. Published by Elsevier Espana. All rights reserved.

The Lamu Basin deepwater fold-and-thrust belt: An example of a margin-scale, gravity-driven thrust belt along the continental passive margin of East Africa

NASA Astrophysics Data System (ADS)

Cruciani, Francesco; Barchi, Massimiliano R.

2016-03-01

In recent decades, advances in seismic processing and acquisition of new data sets have revealed the presence of many deepwater fold-and-thrust belts (DW-FTBs), often developing along continental passive margins. These kinds of tectonic features have been intensively studied, due to their substantial interest. This work presents a regional-scale study of the poorly explored Lamu Basin DW-FTB, a margin-scale, gravity-driven system extending for more than 450 km along the continental passive margin of Kenya and southern Somalia (East Africa). A 2-D seismic data set was analyzed, consisting of both recently acquired high-quality data and old reprocessed seismic profiles, for the first detailed structural and stratigraphic interpretation of this DW-FTB. The system originated over an Early to mid-Cretaceous shale detachment due to a mainly gravity-spreading mechanism. Analysis of synkinematic strata indicates that the DW-FTB was active from the Late Cretaceous to the Early Miocene, but almost all of the deformation occurred before the Late Paleocene. The fold-and-thrust system displays a marked N-S variation in width, the northern portion being more than 150 km wide and the southern portion only a few dozen kilometers wide; this along-strike variation is thought to be related to the complex tectonosedimentary evolution of the continental margin at the Somalia-Kenya boundary, also reflected in the present-day bathymetry. Locally, a series of volcanic edifices stopped the basinward propagation of the DW-FTB. A landward change in the dominant structural style, from asymmetric imbricate thrust sheets to pseudo-symmetric detachment folds, is generally observed, related to the landward thickening of the detached shales.

Half forehead reconstruction with a single rotational scalp flap for dermatofibrosarcoma protuberans treatment

PubMed Central

2012-01-01

Background Dermatofibrosarcoma protuberans (DFSP) is a soft tissue neoplasm of intermediate to low-grade malignancy. Although metastasis rarely occurs, DFSP has a locally aggressive behavior with a high recurrence rate. In the head and neck area, resection involving a wide margin of healthy tissue can be difficult because of functional and cosmetic considerations. We describe a novel reconstructive method for half forehead defects with an innovative single local wide scalp flap following excision of DFSP with a 3 cm margin of healthy tissue. Methods Two patients underwent wide resection of forehead DFSP and reconstruction with a single rotational scalp flap. The scalp flap blood supply was provided from three main vessels: the superficial temporal artery, occipital artery and posterior auricular artery. Results No early or late complications were observed in either patient with no local recurrence after 18 months of follow-up. The donor area could be closed primarily in both cases and the flaps survived completely. Conclusion This innovative technique allowed a radical excision of forehead DFSP with sufficient healthy margins, thus potentially decreasing tumor recurrence rate. Reconstruction was achieved avoiding microsurgery, skin expanders and large skin grafts. Moreover, all main reconstructive criteria, such as functional and cosmetic tissue characteristics, were completely fulfilled. PMID:22559860

Evaluation of safety effectiveness of composite shoulders, wide unpaved shoulders, and wide paved shoulders in Kansas : [technical summary].

DOT National Transportation Integrated Search

2013-03-01

Incremental increases in paved shoulder widths have been studied and are shown in the Highway Safety Manual (HSM). While each incremental increase in shoulder width is beneficial, there is evidence that suggests the relationship between safety improv...

Sub-1-V-60 nm vertical body channel MOSFET-based six-transistor static random access memory array with wide noise margin and excellent power delay product and its optimization with the cell ratio on static random access memory cell

NASA Astrophysics Data System (ADS)

Ogasawara, Ryosuke; Endoh, Tetsuo

2018-04-01

In this study, with the aim to achieve a wide noise margin and an excellent power delay product (PDP), a vertical body channel (BC)-MOSFET-based six-transistor (6T) static random access memory (SRAM) array is evaluated by changing the number of pillars in each part of a SRAM cell, that is, by changing the cell ratio in the SRAM cell. This 60 nm vertical BC-MOSFET-based 6T SRAM array realizes 0.84 V operation under the best PDP and up to 31% improvement of PDP compared with the 6T SRAM array based on a 90 nm planar MOSFET whose gate length and channel width are the same as those of the 60 nm vertical BC-MOSFET. Additionally, the vertical BC-MOSFET-based 6T SRAM array achieves an 8.8% wider read static noise margin (RSNM), a 16% wider write margin (WM), and an 89% smaller leakage. Moreover, it is shown that changing the cell ratio brings larger improvements of RSNM, WM, and write time in the vertical BC-MOSFET-based 6T SRAM array.

The deep Algerian margin structure revisited by the Algerian-French SPIRAL research program, stage 2 : Wide-ange seismic experiment

NASA Astrophysics Data System (ADS)

Klingelhoefer, Frauke; Yellès, Abdelkarim; Bracène, Rabah; Graindorge, David; Ouabadi, Aziouz; Schnürle, Philippe; Scientific Party, Spiral

2010-05-01

During the second leg of the Algerien - French SPIRAL (Sismique Profonde et Investigation Regionale du Nord de l'ALgerie) cruise conducted on the R/V Atalante in October and November 2009 an extensive wide-angle seismic data-set was acquired on 5 regional transects off Algeria, from Arzew bay to the west, to Annaba to the east. The profiles are between 80 and 180 km in length and around 40 ocean-bottom seismometers were deployed on each profile. A 8350 cu. inch tuned airgun array consisting of 10 Bolt airguns was used to generate of deep frequency to allow for a good penetration. All profiles were extended on land up to 150 km by land-stations to better constrain the structure of the margin and the nature of the ocean-continent transition zone. Coincident reflection seismic, gravity and magnetic data were acquired on all profiles during the first leg of the cruise. The resulting data quality is very good with deep penetrating arrivals on most of the instruments. Only on very few instruments a deep salt layer inhibits deeper penetration of the seismic energy. Two instruments were lost and all other yielded useful information on geophone and hydrophone channels. Instruments located close to the coast show arrivals from thick sedimentary layers. Instruments located on oceanic crust indicate a relatively thin crust overlying a mantle layer characterised by seismic velocities of 8 km/s. Forward and inverse modelling of the wide-angle seismic data will help constrain the deep structure of the margin, the nature of the crust and might help to constrain possible existence of a detached slab in the upper mantle. Integration of the wide-angle seismic data with multichannel seismic, gravity and magnetic data will enable us to better understand the tectonic history and the structure of the Algerian margin.

Crustal Deformation In the Northwestern Margin of the South China Sea: Results From Wide-angle Seismic Modeling

NASA Astrophysics Data System (ADS)

Huang, H.; Klingelhoefer, F.

2017-12-01

The South China Sea (SCS) has undergone episodic spreading during the Cenozoic Era. The long-term extension has shaped the continental margins of the SCS, leading to a progressive breakup of the lithosphere. Separated blocks and rift troughs, as controlled by tectonic stretching, contains key information about the deforming mechanism of the crust. In this work, we present a P-wave velocity model of a wide-angle seismic profile OBS2013-1 which passes through the NW margin of the SCS. Modeling of 25 ocean bottom seismometers (OBS) data revealed a detailed crustal structure and shallow complexities along the profile (Figure 1). The crust thins symmetrically across the Xisha Trough, from more than 20 km on flanks to 10 km in the central valley where the sediments thickens over 5 km; A volcano is situated on top of the centre basement high where the Moho drops slightly. At the distal margin around the Zhongsha Trough, the upper crust was detached and accordingly made the middle crust exhumed in a narrow area ( 20 km wide). Meanwhile, materials from the lower crust rises asymmetrically, increasing the crustal velocity by 0.3 km/s and may also giving rise to volcanisms along the hanging side. A 40 km wide hyper-stretched crust (with thickness of 5 km) was identified next to the Zhongsha Trough and covered by overflowing magma and post-rift sediments on the top. These observations argue for a depth-related and asymmetrically extension of the crust, including (1) detachment fault controls the deformation of the upper crust, leading to exhumation of the middle crust and asymmetrically rising of the lower crust, (2) The region adjacent to the exhumation region and with highly thinned crust can be considered as extinct OCT due to magma-starved supplying.

Aviation safety and maintenance under major organizational changes, investigating non-existing accidents.

PubMed

Herrera, Ivonne A; Nordskag, Arve O; Myhre, Grete; Halvorsen, Kåre

2009-11-01

The objective of this paper is to discuss the following questions: Do concurrent organizational changes have a direct impact on aviation maintenance and safety, if so, how can this be measured? These questions were part of the investigation carried out by the Accident Investigation Board, Norway (AIBN). The AIBN investigated whether Norwegian aviation safety had been affected due to major organizational changes between 2000 and 2004. The main concern was the reduction in safety margins and its consequences. This paper presents a summary of the techniques used and explains how they were applied in three airlines and by two offshore helicopter operators. The paper also discusses the development of safety related indicators in the aviation industry. In addition, there is a summary of the lessons learned and safety recommendations. The Norwegian Ministry of Transport has required all players in the aviation industry to follow up the findings and recommendations of the AIBN study.

An assessment and validation study of nuclear reactors for low power space applications

NASA Technical Reports Server (NTRS)

Klein, A. C.; Gedeon, S. R.; Morey, D. C.

1987-01-01

The feasibility and safety of six conceptual small, low power nuclear reactor designs was evaluated. Feasibility evaluations included the determination of sufficient reactivity margins for seven years of full power operation and safe shutdown as well as handling during pre-launch assembly phases. Safety evaluations were concerned with the potential for maintaining subcritical conditions in the event of launch or transportation accidents. These included water immersion accident scenarios both with and without water flooding the core. Results show that most of the concepts can potentially meet the feasibility and safety requirements; however, due to the preliminary nature of the designs considered, more detailed designs will be necessary to enable these concepts to fully meet the safety requirements.

Flood hazard assessment for french NPPs

NASA Astrophysics Data System (ADS)

Rebour, Vincent; Duluc, Claire-Marie; Guimier, Laurent

2015-04-01

This paper presents the approach for flood hazard assessment for NPP which is on-going in France in the framework of post-Fukushima activities. These activities were initially defined considering both European "stress tests" of NPPs pursuant to the request of the European Council, and the French safety audit of civilian nuclear facilities in the light of the Fukushima Daiichi accident. The main actors in that process are the utility (EDF is, up to date, the unique NPP's operator in France), the regulatory authority (ASN) and its technical support organization (IRSN). This paper was prepared by IRSN, considering official positions of the other main actors in the current review process, it was not officially endorsed by them. In France, flood hazard to be considered for design basis definition (for new NPPs and for existing NPPs in periodic safety reviews conducted every 10 years) was revised before Fukushima-Daichi accident, due to le Blayais NPP December 1999 experience (partial site flooding and loss of some safety classified systems). The paper presents in the first part an overview of the revised guidance for design basis flood. In order to address design extension conditions (conditions that could result from natural events exceeding the design basis events), a set of flooding scenarios have been defined by adding margins on the scenarios that are considered for the design. Due to the diversity of phenomena to be considered for flooding hazard, the margin assessment is specific to each flooding scenario in terms of parameter to be penalized and of degree of variation of this parameter. The general approach to address design extension conditions is presented in the second part of the paper. The next parts present the approach for five flooding scenarios including design basis scenario and additional margin to define design extension scenarios.

Treatment response assessment of radiofrequency ablation for hepatocellular carcinoma: usefulness of virtual CT sonography with magnetic navigation.

PubMed

Minami, Yasunori; Kitai, Satoshi; Kudo, Masatoshi

2012-03-01

Virtual CT sonography using magnetic navigation provides cross sectional images of CT volume data corresponding to the angle of the transducer in the magnetic field in real-time. The purpose of this study was to clarify the value of this virtual CT sonography for treatment response of radiofrequency ablation for hepatocellular carcinoma. Sixty-one patients with 88 HCCs measuring 0.5-1.3 cm (mean±SD, 1.0±0.3 cm) were treated by radiofrequency ablation. For early treatment response, dynamic CT was performed 1-5 days (median, 2 days). We compared early treatment response between axial CT images and multi-angle CT images using virtual CT sonography. Residual tumor stains on axial CT images and multi-angle CT images were detected in 11.4% (10/88) and 13.6% (12/88) after the first session of RFA, respectively (P=0.65). Two patients were diagnosed as showing hyperemia enhancement after the initial radiofrequency ablation on axial CT images and showed local tumor progression shortly because of unnoticed residual tumors. Only virtual CT sonography with magnetic navigation retrospectively showed the residual tumor as circular enhancement. In safety margin analysis, 10 patients were excluded because of residual tumors. The safety margin more than 5 mm by virtual CT sonographic images and transverse CT images were determined in 71.8% (56/78) and 82.1% (64/78), respectively (P=0.13). The safety margin should be overestimated on axial CT images in 8 nodules. Virtual CT sonography with magnetic navigation was useful in evaluating the treatment response of radiofrequency ablation therapy for hepatocellular carcinoma. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Improved safety margin for embryotoxicity in rats for the new endoperoxide artefenomel (OZ439) as compared to artesunate.

PubMed

Clark, Robert L; Edwards, Tammye L; Longo, Monica; Kinney, Joseph; Walker, Don K; Rhodes, Jon; Clode, Sally A; Rückle, Thomas; Wells, Timothy; Andenmatten, Nicole; Huber, Anna Christine

2018-04-17

Combination medicines including an artemisinin are the mainstay of antimalarial therapy. Artemisinins are potent embryotoxicants in animal species due to their trioxane moiety. As part of its development, the new synthetic trioxolane antimalarial artefenomel (OZ439) was tested in rat whole embryo culture and in rat embryo-fetal toxicity studies with dosing throughout organogenesis or with a single dose on Gestational Day (GD) 12. The single-dose studies included groups treated with artesunate to allow a direct comparison of the embryotoxicity of the two antimalarials and included toxicokinetics hematology and histological examination of embryos. In addition, the distribution of artefenomel-related material in plasma was determined after the administration of 14 C-artefenomel. Artefenomel and artesunate showed similar patterns of embryotoxicity including cardiovascular defects and resorption with a steep dose-response. They both also caused a depletion of circulating embryonic erythroblasts both in vitro and in vivo and decreases in maternal reticulocyte count. However, artefenomel was ∼250-fold less potent than the active metabolite of artesunate (dihydroartemisinin) as an embryotoxicant in vitro. The safety margin (based on AUC) for artefenomel administered on GD 12 was approximately 100-fold greater than that for artesunate. Also, unlike artesunate, artefenomel was not a selective developmental toxicant. The lesser embryotoxicity of artefenomel is likely linked to its original design which included two blocking side groups that had been introduced to lower the reactivity with ferrous iron. Our data support the hypothesis that artefenomel's improved safety margin is linked to a lower potential for inhibiting heme biosynthesis in embryonic erythroblasts. © 2017 The Authors. Birth Defects Research Published by Wiley Periodicals, Inc.

Chronic warm exposure impairs growth performance and reduces thermal safety margins in the common triplefin fish (Forsterygion lapillum).

PubMed

McArley, Tristan J; Hickey, Anthony J R; Herbert, Neill A

2017-10-01

Intertidal fish species face gradual chronic changes in temperature and greater extremes of acute thermal exposure through climate-induced warming. As sea temperatures rise, it has been proposed that whole-animal performance will be impaired through oxygen and capacity limited thermal tolerance [OCLTT; reduced aerobic metabolic scope (MS)] and, on acute exposure to high temperatures, thermal safety margins may be reduced because of constrained acclimation capacity of upper thermal limits. Using the New Zealand triplefin fish ( Forsterygion lapillum ), this study addressed how performance in terms of growth and metabolism (MS) and upper thermal tolerance limits would be affected by chronic exposure to elevated temperature. Growth was measured in fish acclimated (12 weeks) to present and predicted future temperatures and metabolic rates were then determined in fish at acclimation temperatures and with acute thermal ramping. In agreement with the OCLTT hypothesis, chronic exposure to elevated temperature significantly reduced growth performance and MS. However, despite the prospect of impaired growth performance under warmer future summertime conditions, an annual growth model revealed that elevated temperatures may only shift the timing of high growth potential and not the overall annual growth rate. While the upper thermal tolerance (i.e. critical thermal maxima) increased with exposure to warmer temperatures and was associated with depressed metabolic rates during acute thermal ramping, upper thermal tolerance did not differ between present and predicted future summertime temperatures. This suggests that warming may progressively decrease thermal safety margins for hardy generalist species and could limit the available habitat range of intertidal populations. © 2017. Published by The Company of Biologists Ltd.

Marginal lung donors: A diminishing margin of safety?

PubMed

Botha, Phil; Fisher, Andrew J; Dark, John H

2006-11-27

Lung donor shortages have resulted in the critical appraisal of cadaveric donor acceptability criteria and the gradual relaxation of once strict guidelines. Many centers have reported their results with these "extended criteria" donors and an increasing number of multicenter registry studies have also been published. The results have been contradictory and leave many questions unanswered. Important new data has however come to light since the last review of the subject by the International Society for Heart and Lung Transplantation Pulmonary Council. We review the current literature focusing on recent developments in the pursuit of an expanded lung donor pool with acceptable outcomes.

NF-κB deregulation in splenic marginal zone lymphoma.

PubMed

Spina, Valeria; Rossi, Davide

2016-08-01

Splenic marginal zone lymphoma is a rare mature B-cell malignancy involving the spleen, bone marrow and blood. Over the past years, the rapid expansion of sequencing technologies allowing the genome-wide assessment of genomic, epigenetic and transcriptional changes has revolutionized our understanding of the biological basis of splenic marginal zone lymphoma by providing a comprehensive and unbiased view of the genes/pathways that are deregulated in this disease. NF-κB is a family of transcription factors that plays critical roles in development, survival, and activation of B lymphocytes. Consistent with the physiological involvement of NF-κB signalling in proliferation and commitment of mature B-cells to the marginal zone of the spleen, many oncogenic mutations involved in constitutive activation of the NF-κB pathway were recently identified in splenic marginal zone lymphoma. This review describes the progress in understanding the mechanism of NF-κB activation in splenic marginal zone lymphoma, including molecular, epigenetic and post-transcriptional modifications of NF-κB genes and of upstream pathways, and discusses how information gained from these efforts has provided new insights on potential targets of diagnostic, prognostic and therapeutic relevance for splenic marginal zone lymphoma. Copyright © 2016. Published by Elsevier Ltd.

The long-term evolution of the Congo deep-sea fan: A basin-wide view of the interaction between a giant submarine fan and a mature passive margin (ZaiAngo project)

NASA Astrophysics Data System (ADS)

Anka, Zahie; Séranne, Michel; Lopez, Michel; Scheck-Wenderoth, Magdalena; Savoye, Bruno

2009-05-01

We have integrated the relatively unknown distal domains of the Lower Congo basin, where the main depocenters of the Congo submarine fan are located, with the better-constrained successions on the shelf and upper slope, through the analysis of thousands of km of 2D seismic reflection profiles off-shore the Congo-Angola passive margin. The basin architecture is depicted by two ca. 800-km-long regional cross sections through the northern (Congo) and southern (Angola) margin. A large unit deposited basinward of the Aptian salt limit is likely to be the abyssal-plain equivalent of the upper-Cretaceous carbonate shelf that characterized the first post-rift deposits in West-equatorial African margins. A latest-Turonian shelf-deepening event is recorded in the abyssal plain as a long period (Coniacian-Eocene) of condensed sedimentation and basin starvation. The onset of the giant Tertiary Congo deep-sea fan in early Oligocene following this event reactivates the abyssal plain as the main depocenter of the basin. The time-space partitioning of sedimentation within the deep-sea fan results from the interplay among increasing sediment supply, margin uplift, rise of the Angola salt ridge, and canyon incision throughout the Neogene. Oligocene-early Miocene turbidite sedimentation occurs mainly in NW-SE grabens and ponded inter-diapir basins on the southern margin (Angola). Seaward tilting of the margin and downslope salt withdrawal activates the up-building of the Angola escarpment, which leads to a northward (Congo) shift of the transfer zones during late Miocene. Around the Miocene-Pliocene boundary, the incision of the Congo submarine canyon confines the turbidite flows and drives a general basinward progradation of the submarine fan into the abyssal plain The slope deposition is dominated by fine-grained hemipelagic deposits ever since. Results from this work contribute to better understand the signature in the ultra-deep deposits of processes acting on the continental margin as well as the basin-wide sediment redistribution in areas of high river input.

Oligocene to Holocene sediment drifts and bottom currents on the slope of Gabon continental margin (west Africa). Consequences for sedimentation and southeast Atlantic upwelling

NASA Astrophysics Data System (ADS)

Séranne, Michel; Nzé Abeigne, César-Rostand

1999-10-01

Seismic reflection profiles on the slope of the south Gabon continental margin display furrows 2 km wide and some 200 m deep, that develop normal to the margin in 500-1500 m water depth. Furrows are characterised by an aggradation/progradation pattern which leads to margin-parallel, northwestward migration of their axes through time. These structures, previously interpreted as turbidity current channels, display the distinctive seismic image and internal organisation of sediment drifts, constructed by the activity of bottom currents. Sediment drifts were initiated above a major Oligocene unconformity, and they developed within a Oligocene to Present megasequence of general progradation of the margin, whilst they are markedly absent from the underlying Late Cretaceous-Eocene aggradation megasequence. The presence of upslope migrating sediment waves, and the northwest migration of the sediment drifts indicate deposition by bottom current flowing upslope, under the influence of the Coriolis force. Such landwards-directed bottom currents on the slope probably represent coastal upwelling, which has been active along the west Africa margin throughout the Neogene.

Dosimetric Implications of Residual Tracking Errors During Robotic SBRT of Liver Metastases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, Mark; Tuen Mun Hospital, Hong Kong; Grehn, Melanie

Purpose: Although the metric precision of robotic stereotactic body radiation therapy in the presence of breathing motion is widely known, we investigated the dosimetric implications of breathing phase–related residual tracking errors. Methods and Materials: In 24 patients (28 liver metastases) treated with the CyberKnife, we recorded the residual correlation, prediction, and rotational tracking errors from 90 fractions and binned them into 10 breathing phases. The average breathing phase errors were used to shift and rotate the clinical tumor volume (CTV) and planning target volume (PTV) for each phase to calculate a pseudo 4-dimensional error dose distribution for comparison with themore » original planned dose distribution. Results: The median systematic directional correlation, prediction, and absolute aggregate rotation errors were 0.3 mm (range, 0.1-1.3 mm), 0.01 mm (range, 0.00-0.05 mm), and 1.5° (range, 0.4°-2.7°), respectively. Dosimetrically, 44%, 81%, and 92% of all voxels differed by less than 1%, 3%, and 5% of the planned local dose, respectively. The median coverage reduction for the PTV was 1.1% (range in coverage difference, −7.8% to +0.8%), significantly depending on correlation (P=.026) and rotational (P=.005) error. With a 3-mm PTV margin, the median coverage change for the CTV was 0.0% (range, −1.0% to +5.4%), not significantly depending on any investigated parameter. In 42% of patients, the 3-mm margin did not fully compensate for the residual tracking errors, resulting in a CTV coverage reduction of 0.1% to 1.0%. Conclusions: For liver tumors treated with robotic stereotactic body radiation therapy, a safety margin of 3 mm is not always sufficient to cover all residual tracking errors. Dosimetrically, this translates into only small CTV coverage reductions.« less

A generalized sizing method for revolutionary concepts under probabilistic design constraints

NASA Astrophysics Data System (ADS)

Nam, Taewoo

Internal combustion (IC) engines that consume hydrocarbon fuels have dominated the propulsion systems of air-vehicles for the first century of aviation. In recent years, however, growing concern over rapid climate changes and national energy security has galvanized the aerospace community into delving into new alternatives that could challenge the dominance of the IC engine. Nevertheless, traditional aircraft sizing methods have significant shortcomings for the design of such unconventionally powered aircraft. First, the methods are specialized for aircraft powered by IC engines, and thus are not flexible enough to assess revolutionary propulsion concepts that produce propulsive thrust through a completely different energy conversion process. Another deficiency associated with the traditional methods is that a user of these methods must rely heavily on experts' experience and advice for determining appropriate design margins. However, the introduction of revolutionary propulsion systems and energy sources is very likely to entail an unconventional aircraft configuration, which inexorably disqualifies the conjecture of such "connoisseurs" as a means of risk management. Motivated by such deficiencies, this dissertation aims at advancing two aspects of aircraft sizing: (1) to develop a generalized aircraft sizing formulation applicable to a wide range of unconventionally powered aircraft concepts and (2) to formulate a probabilistic optimization technique that is able to quantify appropriate design margins that are tailored towards the level of risk deemed acceptable to a decision maker. A more generalized aircraft sizing formulation, named the Architecture Independent Aircraft Sizing Method (AIASM), was developed for sizing revolutionary aircraft powered by alternative energy sources by modifying several assumptions of the traditional aircraft sizing method. Along with advances in deterministic aircraft sizing, a non-deterministic sizing technique, named the Probabilistic Aircraft Sizing Method (PASM), was developed. The method allows one to quantify adequate design margins to account for the various sources of uncertainty via the application of the chance-constrained programming (CCP) strategy to AIASM. In this way, PASM can also provide insights into a good compromise between cost and safety.

Methodology Development for Passive Component Reliability Modeling in a Multi-Physics Simulation Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aldemir, Tunc; Denning, Richard; Catalyurek, Umit

Reduction in safety margin can be expected as passive structures and components undergo degradation with time. Limitations in the traditional probabilistic risk assessment (PRA) methodology constrain its value as an effective tool to address the impact of aging effects on risk and for quantifying the impact of aging management strategies in maintaining safety margins. A methodology has been developed to address multiple aging mechanisms involving large numbers of components (with possibly statistically dependent failures) within the PRA framework in a computationally feasible manner when the sequencing of events is conditioned on the physical conditions predicted in a simulation environment, suchmore » as the New Generation System Code (NGSC) concept. Both epistemic and aleatory uncertainties can be accounted for within the same phenomenological framework and maintenance can be accounted for in a coherent fashion. The framework accommodates the prospective impacts of various intervention strategies such as testing, maintenance, and refurbishment. The methodology is illustrated with several examples.« less

Nozzle extension design status report

NASA Technical Reports Server (NTRS)

Classen, L. B.

1972-01-01

Twenty possible concepts of a possible nozzle/nozzle extension interface were originated. Not all of the concepts were considered worthy of analysis time. Six of them were thermally analyzed and three were stress analyzed. These analyses were done to determine which of the concepts would have the best chance of succeeding, that is, they were a screening process which was to allow rating of one concept against another. This was done because adequate material properties to determine absolute stress levels were not available at the time of the analyses. Through all of the concepts still exhibit some areas of negative margin of safety, concept no. 1 shows good promise that, with slight modifications, it could have all positive margins of safety. Another significant question, regarding these designs, has to do with the Grafoil seals and insulators. Some additional data was just recently received on Grafoil properties, but it was too late to incorporate in the analyses. The new data were not significantly different from the properties which were used.

Protecting Urban Health and Safety: Balancing Care and Harm in the Era of Mass Incarceration.

PubMed

Gaber, Nadia; Wright, Anthony

2016-04-01

This paper explores theoretical, spatial, and mediatized pathways through which policing poses harms to the health of marginalized communities in the urban USA, including analysis of two recent and widely publicized incidents of officer-involved killings in Ferguson, Missouri and Staten Island, New York. We examine the influence of the "broken windows" model in both policing and public health, revealing alternate institutional strategies for responding to urban disorder in the interests of the health and safety of the city. Drawing on ecosocial theory and medical anthropology, we consider the roles of the segregated built environment and historical experience in the embodiment of structural vulnerability with respect to police violence. We examine the recent shootings of Eric Garner and Michael Brown as the most visible, most circulated symbols of this complex and contradictory terrain, focusing on the pathways through which theories of causality authorize violent and/or caring intervention by the state. We show how police killings reveal an underlying and racialized association between disorder and deviance that becomes institutionalized and embodied through spatial and symbolic pathways. If public health workers and advocates are to play a role in responding to the call of the Black Lives Matter movement, it is important to understand the interpretations and translations of urban social life that circulate on the streets, in the media, in public policy, and in institutional practice.

Biological and haematological safety profile of oral amodiaquine and chloroquine in healthy volunteers with or without Plasmodium falciparum infection in northeast Tanzania.

PubMed

Massaga, J J; Lusingu, J P; Makunde, R; Malebo, H M; Chile, M M; Akida, J A; Lemnge, M M; Rønn, A M; Theander, T G; Bygbjerg, I C; Kitua, A Y

2008-07-01

Amodiaquine (AQ), an effective antimalarial drug for uncomplicated malaria, has been greatly restricted after cases of life-threatening agranulocytosis and hepatic toxicity during prophylactic use. We conducted a hospital based open-label randomised clinical trial in 40 indigenous semi-immune healthy adult male volunteers with and without malaria parasites. The objective was to collect data on biological and haematological safety, tolerability, and parasitological efficacy to serve as baseline in the evaluation of the effectiveness of AQ preventive intermittent treatment against malaria morbidity in infants. Volunteers were stratified according to parasitaemia status and randomly assigned 20 participants each arm to three days treatment with either AQ or chloroquine (CQ). The level of difference of selected haematological and hepatological values pre-and post-trial were marginal and within the normal limits. Clinical adverse effects mostly mild and transient were noticed in 33.3% CQ treated-aparasitaemic, 23.8% of CQ treated-parasitaemic, 28.6% ofAQ-treated parasitaemic and 14.3% of aparasitaemic receiving AQ. Amodiaquine attained 100% parasitological clearance rate versus 70% in CQ-treated volunteers. The findings indicate that there was no agranulocytosis or hepatic toxicity suggesting that AQ may pose no public health risk in its wide therapeutic dosage uses. Larger studies are needed to exclude rare adverse effects.

Acoustic Liner for Turbomachinery Applications

NASA Technical Reports Server (NTRS)

Huff, Dennis L.; Sutliff, Daniel L.; Jones, Michael G.; Hebsur, Mohan G.

2010-01-01

The purpose of this innovation is to reduce aircraft noise in the communities surrounding airports by significantly attenuating the noise generated by the turbomachinery, and enhancing safety by providing a containment barrier for a blade failure. Acoustic liners are used in today's turbofan engines to reduce noise. The amount of noise reduction from an acoustic liner is a function of the treatment area, the liner design, and the material properties, and limited by the constraints of the nacelle or casement design. It is desirable to increase the effective area of the acoustic treatment to increase noise suppression. Modern turbofan engines use wide-chord rotor blades, which means there is considerable treatment area available over the rotor tip. Turbofan engines require containment over the rotors for protection from blade failure. Traditional methods use a material wrap such as Kevlar integrated with rub strips and sometimes metal layers (sandwiches). It is possible to substitute the soft rub-strip material with an open-cell metallic foam that provides noise-reduction benefits and a sacrificial material in the first layer of the containment system. An open-cell foam was evaluated that behaves like a bulk acoustic liner, serves as a tip rub strip, and can be integrated with a rotor containment system. Foams can be integrated with the fan-containment system to provide sufficient safety margins and increased noise attenuation. The major innovation is the integration of the foam with the containment.

Reappraisal of the Therapeutic Role of Celecoxib in Cholangiocarcinoma

PubMed Central

Juang, Horng-Heng; S. Pang, Jong-Hwei; Yu, Chung-Shan; Lin, Kun-Ju; Yeh, Ta-Sen; Jan, Yi-Yin

2013-01-01

Cholangiocarcinoma (CCA), a lethal disease, affects many thousands worldwide yearly. Surgical resection provides the best chance for a cure; however, only one-third of CCA patients present with a resectable tumour at the time of diagnosis. Currently, no effective chemotherapy is available for advanced CCA. Cyclooxygenase-2 (COX-2) is a potential oncogene expressing in human CCA tissues and represents a candidate target for treatment; however, COX-2 inhibitors increase the risk of negative cardiovascular events as application for chemoprevention aim. Here, we re-evaluated the effectiveness and safety of celecoxib, one widely used COX-2 inhibitor, in treating CCA. We demonstrated that celecoxib exhibited an anti-proliferative effect on CGCCA cells via cell cycle arrest at G2 phase and apoptosis induction. Treatment for 5 weeks high dose celecoxib (160 mg/kg) significantly repressed thioacetamide-induced CCA tumour growth in rats as monitored by animal positron emission tomography through apoptosis induction. No obviously observable side effects were noted during the therapeutic period. As retrospectively reviewing 78 intrahepatic mass-forming CCA patients, their survival was strongly and negatively associated with a positive resection margin and high COX-2 expression. Based on our result, we concluded that short-term high dose celecoxib may be a promising therapeutic regimen for CCA. Yet its clinical application still needs more studies to prove its safety. PMID:23922859

Harnessing the Power of Light to See and Treat Breast Cancer

DTIC Science & Technology

2012-10-01

informed approach to study tumor biology and assay the effect of novel therapeutic agents in vivo. 15. SUBJECT TERMS optical spectroscopy, imaging , fiber...Statement of Work for 5 Years Aim 1: Optical imaging of margin morphology on breast lumpectomy specimens: To evaluate the role of wide-field imaging ...assessment of the tumor margin post-operatively (Timeframe: year 1-5). 1a. Development of one optical spectral imaging system that integrates sensing

Evidence for submarine landslides and continental slope erosion related to fault reactivation during the last glaciation offshore eastern Canada

NASA Astrophysics Data System (ADS)

Saint-Ange, F.; Campbell, C.; MacKillop, K.; Mosher, D. C.; Piper, D. J.; Roger, J.

2012-12-01

Many studies have proposed that reactivation of dormant faults during deglaciation is a source of neotectonic activity in glaciated regions, but few have demonstrated the relationship to submarine landslides. In this study, seabed morphology and shallow geology of the outer continental margin adjacent to the Charlie Gibbs Fracture Zone off Newfoundland, Canada was investigated for evidence of this relationship. The glacial history and morphology of the margin suggest that the entire continental shelf in the area, coincident with major continental crustal lineaments, was ice-covered during the Last glacial cycle, and transverse troughs delineate the paleo-icestream drainage patterns. A recent investigation of Notre Dame Trough revealed the existence of large sediment failures on the shelf. The current study investigates complex seafloor erosion and widespread mass transport deposition (MTD) on the continental slope seaward of Notre Dame Trough, using recently-acquired high resolution seismic reflection data and piston cores. The new data reveal that a trough mouth fan (TMF) is present on the slope seaward of Notre Dame Trough. The Notre Dame TMF is characterized by a succession of stacked debris flows, but does not show a lobate shape in plan view like other classic TMFs. Instead, the Notre Dame TMF has abruptly-truncated margins suggesting post-depositional failure and erosion of the fan deposits. Seismic reflection data show that the locations of the failures along the TMF margin are coincident with a set of shallow faults; however the current dataset does not image the deeper portion of the faults. On the upper slope immediately south of the TMF, a narrow and deeply incised canyon is located along-trend with the Notre Dame Trough. The location of this canyon appears to be controlled by a fault. Downslope from this canyon, along the southern margin of the TMF, a 25 km wide, flat-floored, U-shaped valley was eroded into a succession of stacked MTD-filled channels. Seismic stratigraphic analysis shows that the valley developed around the same time as the adjacent TMF, however, the valley morphology and evidence for repeated slope failure suggests that the processes responsible for its formation were different than the processes that formed the nearby TMF. Age control provided from piston cores suggest that the last major slope failure that contributed to valley formation probably occurred at ~29 ka. Geotechnical measurements from piston cores show slightly underconsolidated sediments. The results indicate that this part of the margin is more unstable than Orphan Basin and Labrador slope regions. Given the low factor of safety and the complex fault system, low energy earthquake from the surrounding area could be enough to potentially trigger landslides.

An evaluation of brachytherapy and external beam radiation used with wide-margin surgical resection in the treatment of extra-abdominal desmoid tumors.

PubMed

Husain, Zain; Benevenia, Joseph; Uglialoro, Anthony D; Beebe, Kathleen S; Patterson, Francis R; Hameed, Meera R; Cathcart, Charles S

2011-05-01

Surgical resection has had control rates of 53% to 77% in the treatment of extra-abdominal desmoid tumors. Surgical excision combined with external beam radiation therapy (EBRT) has had local control rates of up to 83% in some series. The purpose of this study was to evaluate the effectiveness of resection combined with radiotherapy (brachytherapy, EBRT, or both) in the treatment of extra-abdominal desmoid tumors. We retrospectively reviewed the charts of 24 consecutive patients (27 histologically confirmed extra-abdominal desmoid tumors). Patients were included in the study if they had a lesion that was potentially resectable with a wide margin, allowing for limb salvage, and if they did not have a contraindication to radiotherapy. Limb functioning was assessed with the Musculoskeletal Tumor Society (MSTS) scoring system. Seventeen patients (7 men, 10 women) with 19 tumors met the inclusion criteria. Mean age at diagnosis was 23.4 years. Follow-up (mean, 4.28 years) involved serial clinical examinations and magnetic resonance imaging of tumor sites. After surgery, the tumors were treated with brachytherapy (n = 6), EBRT (n = 10), or both (n = 3). Two of the 17 tumors in patients with negative margins of resection recurred locally (local control rate, 88.2%). Mean MSTS score was 29/30 (96.7%). The role of surgery, radiotherapy, chemotherapy, hormone therapy, and other treatments for extra-abdominal desmoid tumors is not well defined. When wide-margin resection and radiotherapy can be performed with limb preservation surgery, local control and complication rates compare favorably with those of other reported methods of treatment. Given the results and limitations of our study, we cannot make a definitive recommendation as to which modality--brachytherapy or EBRT--should be used in the treatment of extra-abdominal desmoid tumors.

Marginal kidney donor

PubMed Central

Gopalakrishnan, Ganesh; Gourabathini, Siva Prasad

2007-01-01

Renal transplantation is the treatment of choice for a medically eligible patient with end stage renal disease. The number of renal transplants has increased rapidly over the last two decades. However, the demand for organs has increased even more. This disparity between the availability of organs and waitlisted patients for transplants has forced many transplant centers across the world to use marginal kidneys and donors. We performed a Medline search to establish the current status of marginal kidney donors in the world. Transplant programs using marginal deceased renal grafts is well established. The focus is now on efforts to improve their results. Utilization of non-heart-beating donors is still in a plateau phase and comprises a minor percentage of deceased donations. The main concern is primary non-function of the renal graft apart from legal and ethical issues. Transplants with living donors outnumbered cadaveric transplants at many centers in the last decade. There has been an increased use of marginal living kidney donors with some acceptable medical risks. Our primary concern is the safety of the living donor. There is not enough scientific data available to quantify the risks involved for such donation. The definition of marginal living donor is still not clear and there are no uniform recommendations. The decision must be tailored to each donor who in turn should be actively involved at all levels of the decision-making process. In the current circumstances, our responsibility is very crucial in making decisions for either accepting or rejecting a marginal living donor. PMID:19718332

Rift migration explains continental margin asymmetry and crustal hyper-extension

PubMed Central

Brune, Sascha; Heine, Christian; Pérez-Gussinyé, Marta; Sobolev, Stephan V.

2014-01-01

When continents break apart, continental crust and lithosphere are thinned until break-up is achieved and an oceanic basin is formed. The most remarkable and least understood structures associated with this process are up to 200 km wide areas of hyper-extended continental crust, which are partitioned between conjugate margins with pronounced asymmetry. Here we show, using high-resolution thermo-mechanical modelling, that hyper-extended crust and margin asymmetry are produced by steady state rift migration. We demonstrate that rift migration is accomplished by sequential, oceanward-younging, upper crustal faults, and is balanced through lower crustal flow. Constraining our model with a new South Atlantic plate reconstruction, we demonstrate that larger extension velocities may account for southward increasing width and asymmetry of these conjugate magma-poor margins. Our model challenges conventional ideas of rifted margin evolution, as it implies that during rift migration large amounts of material are transferred from one side of the rift zone to the other. PMID:24905463

An evaluation of two conducted electrical weapons and two probe designs using a swine comparative cardiac safety model.

PubMed

Dawes, Donald Murray; Ho, Jeffrey D; Moore, Johanna C; Miner, James R

2013-09-01

Despite human laboratory and field studies that have demonstrated a reasonable safety profile for TASER brand conducted electrical weapons (CEW), the results of some swine studies and arrest related deaths temporal to the use of the CEWs continue to raise questions regarding cardiac safety. TASER International, Inc., has released a new CEW, the TASER X2, touted to have a better safety profile than its long-standing predecessor, the TASER X26. We have developed a model to assess the relative cardiac safety of CEWs and used it to compare the TASER X2 and the TASER X26. This safety model was also used to assess the relative safety of an experimental probe design as compared to the standard steel probe. Our results suggest that the TASER X2 has an improved safety margin over the TASER X26. The new probe design also has promise for enhanced cardiac safety, although may have some disadvantages when compared to the existing design which would make field use impractical.

A Sm-Nd and Pb isotope study of Archaean greenstone belts in the southern Kaapvaal Craton, South Africa

NASA Technical Reports Server (NTRS)

Wilson, A. H.; Carlson, R. W.

1989-01-01

An Sm-Nd and Pb study on a wide variety of lithologies in Archaean greenstone belt fragments in the southern Kaapvaal Craton reveals a complex petrogenetic history. The fragments are important because they represent a 350 km transect through the craton south of Barberton to its southern margin. The Commondale greenstone belt yields a precise Sm-Nd age of 3334 + or - 18 Ma on an exceptionally well preserved peridotite suite of komatiitic affinity. The wide range of Sm/Nd from 0.6 to 1.0 is attributed to the unusual occurrence of orthopyroxene in the spinifex-bearing rocks. A considerably younger age of about 3.2 Ga is suggested for the Nondweni greenstone belt close to the southern margin of the craton on the basis of separate Sm-Nd isochrons on individual lithologies ranging from komatiite, through komatiitic basalt and basalt to felsic volcanic rocks. On the basis of the present study the greenstone belts appear to have been emplaced at progressively younger ages toward the southern margin of the craton.

Handling qualities of a wide-body transport airplane utilizing Pitch Active Control Systems (PACS) for relaxed static stability application

NASA Technical Reports Server (NTRS)

Grantham, William D.; Person, Lee H., Jr.; Brown, Philip W.; Becker, Lawrence E.; Hunt, George E.; Rising, J. J.; Davis, W. J.; Willey, C. S.; Weaver, W. A.; Cokeley, R.

1985-01-01

Piloted simulation studies have been conducted to evaluate the effectiveness of two pitch active control systems (PACS) on the flying qualities of a wide-body transport airplane when operating at negative static margins. These two pitch active control systems consisted of a simple 'near-term' PACS and a more complex 'advanced' PACS. Eight different flight conditions, representing the entire flight envelope, were evaluated with emphasis on the cruise flight conditions. These studies were made utilizing the Langley Visual/Motion Simulator (VMS) which has six degrees of freedom. The simulation tests indicated that (1) the flying qualities of the baseline aircraft (PACS off) for the cruise and other high-speed flight conditions were unacceptable at center-of-gravity positions aft of the neutral static stability point; (2) within the linear static stability flight envelope, the near-term PACS provided acceptable flying qualities for static stabilty margins to -3 percent; and (3) with the advanced PACS operative, the flying qualities were demonstrated to be good (satisfactory to very acceptable) for static stabilty margins to -20 percent.

National Defense on the High Frontier.

ERIC Educational Resources Information Center

Graham, Daniel O.

1983-01-01

A new American defense policy based on satellites which can track down and destroy Soviet missiles is less expensive and more workable than is commonly believed. Such a policy would provide a greater margin of safety than the present policy of deterence based on mutually assured destruction. (IS)

Isocyanate and total inhalable particulate air measurements in the European wood panel industry.

PubMed

Vangronsveld, E; Berckmans, S; Verbinnen, K; Van Leeuw, C; Bormans, C

2010-11-01

It is well known that the use of MDI (methylene diphenyldiisocyanate) as an alternative for formaldehyde-based resins is seen as a responsible option to reduce formaldehyde emissions for CWP (Composite Wood Products) in buildings. However, there are concerns raised regarding the exposure risk of workers. The purpose of this article is to provide the reader with factual information to demonstrate that the use of MDI compared to other agents used in CWP production processes does not pose increased inhalation exposure risks for workers. Personal and area air measurements were carried out at nine Composite Wood Panel plants throughout Europe to assess potential inhalation exposures to MDI and wood dust as Total Inhalable Particulates (TIP). In total, 446 pairs of samples were collected for MDI and TIP of which 283 pairs were personal samples and the remaining 163 pairs were area samples collected at key locations along the production line. This data together with published formaldehyde exposure data has been used to evaluate the exposure safety margin opposite what are considered relevant occupational exposure limits. The methods used for sampling and analysing MDI and TIP are based on internationally accepted methods, i.e. MDHS 25/3 (or ISO 16702) for MDI, and MDHS 14/3 for TIP. The job functions with an increased exposure profile for TIP were the cleaners, drying operators and quality control staff, and for MDI, the cleaners and quality control staff. The areas with an increased exposure profile for TIP are the conveyor area from OSB blender to former area and the OSB press infeed, and for MDI the OSB weigh belt and OSB former bin area. The exposure safety margin opposite the selected exposure limits can be ranked as MDI>TIP>formaldehyde (high margin of safety to low margin of safety), indicating that the use of MDI also reduces the exposure risks to workers during production of CWP compared to formaldehyde. By reducing the airborne TIP concentrations, a respiratory sensitiser, MDI workplace concentrations in general can be reduced further. This can be achieved by improving design and/or maintenance and testing programmes of existing control measures, which should be in place already to effectively control exposure to TIP and formaldehyde. The airborne concentration of MDI at workstations situated after pressing (curing) is regarded as extremely low and likely mainly constituted by workplace emissions from elsewhere in the plant. Copyright © 2010 Elsevier GmbH. All rights reserved.

Dosimetric evaluation of intrafractional tumor motion by means of a robot driven phantom

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richter, Anne; Wilbert, Juergen; Flentje, Michael

2011-10-15

Purpose: The aim of the work was to investigate the influence of intrafractional tumor motion to the accumulated (absorbed) dose. The accumulated dose was determined by means of calculations and measurements with a robot driven motion phantom. Methods: Different motion scenarios and compensation techniques were realized in a phantom study to investigate the influence of motion on image acquisition, dose calculation, and dose measurement. The influence of motion on the accumulated dose was calculated by employing two methods (a model based and a voxel based method). Results: Tumor motion resulted in a blurring of steep dose gradients and a reductionmore » of dose at the periphery of the target. A systematic variation of motion parameters allowed the determination of the main influence parameters on the accumulated dose. The key parameters with the greatest influence on dose were the mean amplitude and the pattern of motion. Investigations on necessary safety margins to compensate for dose reduction have shown that smaller safety margins are sufficient, if the developed concept with optimized margins (OPT concept) was used instead of the standard internal target volume (ITV) concept. Both calculation methods were a reasonable approximation of the measured dose with the voxel based method being in better agreement with the measurements. Conclusions: Further evaluation of available systems and algorithms for dose accumulation are needed to create guidelines for the verification of the accumulated dose.« less

Can basal cell carcinoma lateral border be determined by fluorescence diagnosis?: Verification by Mohs micrographic surgery.

PubMed

El Hoshy, Khaled; Bosseila, Manal; El Sharkawy, Dina; Sobhi, Rehab

2016-06-01

The preferential accumulation of 5-aminolaevulinic acid (ALA)-induced protoporphyrin IX (PpIX) in neoplastic cells supports its potential use in the photodetection of epithelial tumours through porphyrin fluorescence. To assess the validity of fluorescence diagnosis (FD) as an efficient pre-surgical in vivo imaging tool for defining the lateral boundaries of various types of basal cell carcinomas (BCCs). The BCC tumour area was determined for 27 patients using FD digitalized imaging system, where the accumulation of PpIX in tumour tissue in relation to normal tissue was measured. Subsequently, BCCs were excised according to the complete area defined by FD using Mohs micrographic surgery (MMS). Of the 27 BCCs, the FD margin of the lesion coincided with the histopathological picture in 12 BCCs (44.44%). The mean value of accumulation factor (AF) was 2.7. Although 17 pigmented BCCs showed attenuated or absent fluorescence in the center, fluorescence at their periphery was used as a guide for excision, and statistically, the pigmentation of the BCCs showed no effect on the results of the FD efficacy (p=1.0). Fluorescence diagnosis of BCC may be beneficial as a guide to the safety margin needed before MMS. The safety margin is decided according to the FD tumour diameter in relation to the clinical tumour diameter. Copyright © 2016 Elsevier B.V. All rights reserved.

Safety and efficacy of LigaSure usage in pancreaticoduodenectomy.

PubMed

Eng, Oliver S; Goswami, Julie; Moore, Dirk; Chen, Chunxia; Brumbaugh, Jennifer; Gannon, Christopher J; August, David A; Carpizo, Darren R

2013-10-01

Over recent years, use of the LigaSure™ vessel sealing device has increased in major abdominal surgery to include pancreaticoduodenectomy (PD). LigaSure™ use during PD has expanded to include all steps of the procedure, including the division of the uncinate margin. This introduces the potential for thermal major vascular injury or margin positivity. The aim of the present study was to evaluate the safety and efficacy of LigaSure™ usage in PD in comparison to established dissection techniques. One hundred and forty-eight patients who underwent PD from 2007 to 2012 at Robert Wood Johnson University Hospital were identified from a retrospective database. Two groups were recognized: those in which the LigaSure™ device was used (N = 114), and in those it was not (N = 34). Peri-operative outcomes were compared. Vascular intra-operative complications directly caused by thermal injury from LigaSure™ use occurred in 1.8% of patients. Overall vascular intra-operative complications, uncinate margin positivity, blood loss, length of stay, and complication severity were not significantly different between groups. The mean operative time was 77 min less (P < 0.010) in the LigaSure™ group. Savings per case where the LigaSure™ was used amounted to $1776.73. LigaSure™ usage during PD is safe and effective. It is associated with decreased operative times, which may decrease operative costs in PD. © 2013 International Hepato-Pancreato-Biliary Association.

Safety and efficacy of LigaSure usage in pancreaticoduodenectomy

PubMed Central

Eng, Oliver S; Goswami, Julie; Moore, Dirk; Chen, Chunxia; Brumbaugh, Jennifer; Gannon, Christopher J; August, David A; Carpizo, Darren R

2013-01-01

Background Over recent years, use of the LigaSure™ vessel sealing device has increased in major abdominal surgery to include pancreaticoduodenectomy (PD). LigaSure™ use during PD has expanded to include all steps of the procedure, including the division of the uncinate margin. This introduces the potential for thermal major vascular injury or margin positivity. The aim of the present study was to evaluate the safety and efficacy of LigaSure™ usage in PD in comparison to established dissection techniques. Methods One hundred and forty-eight patients who underwent PD from 2007 to 2012 at Robert Wood Johnson University Hospital were identified from a retrospective database. Two groups were recognized: those in which the LigaSure™ device was used (N = 114), and in those it was not (N = 34). Peri-operative outcomes were compared. Results Vascular intra-operative complications directly caused by thermal injury from LigaSure™ use occurred in 1.8% of patients. Overall vascular intra-operative complications, uncinate margin positivity, blood loss, length of stay, and complication severity were not significantly different between groups. The mean operative time was 77 min less (P < 0.010) in the LigaSure™ group. Savings per case where the LigaSure™ was used amounted to $1776.73. Conclusion LigaSure™ usage during PD is safe and effective. It is associated with decreased operative times, which may decrease operative costs in PD. PMID:23782268

Tyre-road grip coefficient assessment - Part II: online estimation using instrumented vehicle, extended Kalman filter, and neural network

NASA Astrophysics Data System (ADS)

Luque, Pablo; Mántaras, Daniel A.; Fidalgo, Eloy; Álvarez, Javier; Riva, Paolo; Girón, Pablo; Compadre, Diego; Ferran, Jordi

2013-12-01

The main objective of this work is to determine the limit of safe driving conditions by identifying the maximal friction coefficient in a real vehicle. The study will focus on finding a method to determine this limit before reaching the skid, which is valuable information in the context of traffic safety. Since it is not possible to measure the friction coefficient directly, it will be estimated using the appropriate tools in order to get the most accurate information. A real vehicle is instrumented to collect information of general kinematics and steering tie-rod forces. A real-time algorithm is developed to estimate forces and aligning torque in the tyres using an extended Kalman filter and neural networks techniques. The methodology is based on determining the aligning torque; this variable allows evaluation of the behaviour of the tyre. It transmits interesting information from the tyre-road contact and can be used to predict the maximal tyre grip and safety margin. The maximal grip coefficient is estimated according to a knowledge base, extracted from computer simulation of a high detailed three-dimensional model, using Adams® software. The proposed methodology is validated and applied to real driving conditions, in which maximal grip and safety margin are properly estimated.

RAVEN Theory Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alfonsi, Andrea; Rabiti, Cristian; Mandelli, Diego

2016-06-01

RAVEN is a software framework able to perform parametric and stochastic analysis based on the response of complex system codes. The initial development was aimed at providing dynamic risk analysis capabilities to the thermohydraulic code RELAP-7, currently under development at Idaho National Laboratory (INL). Although the initial goal has been fully accomplished, RAVEN is now a multi-purpose stochastic and uncertainty quantification platform, capable of communicating with any system code. In fact, the provided Application Programming Interfaces (APIs) allow RAVEN to interact with any code as long as all the parameters that need to be perturbed are accessible by input filesmore » or via python interfaces. RAVEN is capable of investigating system response and explore input space using various sampling schemes such as Monte Carlo, grid, or Latin hypercube. However, RAVEN strength lies in its system feature discovery capabilities such as: constructing limit surfaces, separating regions of the input space leading to system failure, and using dynamic supervised learning techniques. The development of RAVEN started in 2012 when, within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the need to provide a modern risk evaluation framework arose. RAVEN’s principal assignment is to provide the necessary software and algorithms in order to employ the concepts developed by the Risk Informed Safety Margin Characterization (RISMC) program. RISMC is one of the pathways defined within the Light Water Reactor Sustainability (LWRS) program. In the RISMC approach, the goal is not just to identify the frequency of an event potentially leading to a system failure, but the proximity (or lack thereof) to key safety-related events. Hence, the approach is interested in identifying and increasing the safety margins related to those events. A safety margin is a numerical value quantifying the probability that a safety metric (e.g. peak pressure in a pipe) is exceeded under certain conditions. Most of the capabilities, implemented having RELAP-7 as a principal focus, are easily deployable to other system codes. For this reason, several side activates have been employed (e.g. RELAP5-3D, any MOOSE-based App, etc.) or are currently ongoing for coupling RAVEN with several different software. The aim of this document is to provide a set of commented examples that can help the user to become familiar with the RAVEN code usage.« less

Guidance for the safety assessment of botanicals and botanical preparations for use in food and food supplements.

PubMed

Schilter, B; Andersson, C; Anton, R; Constable, A; Kleiner, J; O'Brien, J; Renwick, A G; Korver, O; Smit, F; Walker, R

2003-12-01

There is a growing interest by both consumers and industry for the development of food products with 'functional' properties, or health benefits. These products may take the form of dietary supplements or of foods. The health benefits are given by particular ingredients, and in many cases these are derived from botanicals. The variety of plants providing these functions is large, ranging from staple food sources such as cereals, fruits and vegetables, to herbals as used in traditional medicine. The food or ingredient conferring health properties may consist of the plants themselves, extracts thereof, or more purified components. The scientific literature is abundant with articles not only on the beneficial properties, but also on possible adverse health effects of plants and their components. The present report discusses the data required to determine the safe use of these types of ingredients, and provides advice on the development of risk assessment strategies consistent with due diligence under existing food regulations. Product specifications, composition and characterisation of standardised and authentic materials, documented history of use and comparison to existing products (taking into account the effect of industrial processing), description of the intended use and consequent exposure are highlighted as key background information on which to base a risk evaluation. The extent of experimental investigation required, such as in vitro, animal, and/or human studies, depends on the adequacy of this information. A decision tree is presented as an aid to determine the extent of data requirements based on product comparison. The ultimate safety in use depends on the establishment of an adequate safety margin between expected exposure and identified potential hazards. Health hazards may arise from inherent toxicities or contaminants of the plant materials, including the mechanism of the intended beneficial effect. A lower safety margin may therefore be expected than for food ingredients or additives where no physiological effects are intended. In rare cases, post launch monitoring programmes may be envisaged to confirm expected exposures and adequacy of the safety margin. This guidance document was elaborated by an expert group of the Natural Toxin Task Force of the European Branch of the International Life Sciences Institute--ILSI Europe and discussed with a wider audience of scientists at a workshop held on 13-15 May 2002 in Marseille, France.

Principles of Safety Pharmacology

PubMed Central

Pugsley, M K; Authier, S; Curtis, M J

2008-01-01

Safety Pharmacology is a rapidly developing discipline that uses the basic principles of pharmacology in a regulatory-driven process to generate data to inform risk/benefit assessment. The aim of Safety Pharmacology is to characterize the pharmacodynamic/pharmacokinetic (PK/PD) relationship of a drug's adverse effects using continuously evolving methodology. Unlike toxicology, Safety Pharmacology includes within its remit a regulatory requirement to predict the risk of rare lethal events. This gives Safety Pharmacology its unique character. The key issues for Safety Pharmacology are detection of an adverse effect liability, projection of the data into safety margin calculation and finally clinical safety monitoring. This article sets out to explain the drivers for Safety Pharmacology so that the wider pharmacology community is better placed to understand the discipline. It concludes with a summary of principles that may help inform future resolution of unmet needs (especially establishing model validation for accurate risk assessment). Subsequent articles in this issue of the journal address specific aspects of Safety Pharmacology to explore the issues of model choice, the burden of proof and to highlight areas of intensive activity (such as testing for drug-induced rare event liability, and the challenge of testing the safety of so-called biologics (antibodies, gene therapy and so on.). PMID:18604233

The Paget Trial: A Multicenter, Observational Cohort Intervention Study for the Clinical Efficacy, Safety, and Immunological Response of Topical 5% Imiquimod Cream for Vulvar Paget Disease.

PubMed

van der Linden, Michelle; Meeuwis, Kim; van Hees, Colette; van Dorst, Eleonora; Bulten, Johan; Bosse, Tjalling; IntHout, Joanna; Boll, Dorry; Slangen, Brigitte; van Seters, Manon; van Beurden, Marc; van Poelgeest, Mariëtte; de Hullu, Joanne

2017-09-06

Vulvar Paget disease is a rare skin disorder, which is most common in postmenopausal Caucasian women. They usually present with an erythematous plaque that may show fine or typical "cake icing" scaling or ulceration that may cause itching, pain, irritation, or a burning sensation. Although most cases are noninvasive, vulvar Paget disease may be invasive or associated with an underlying vulvar or distant adenocarcinoma. The histological evidence of so-called "Paget cells" with abundant pale cytoplasm in the epithelium confirms the diagnosis. The origin of these Paget cells is still unclear. Treatment of choice is wide local excision with negative margins. Obtaining clear surgical margins is challenging and may lead to extensive and mutilating surgery. Even then, recurrence rates are high, ranging from 15% to 70%, which emphasizes the need for new treatment options. A number of case reports, retrospective case series, and one observational study have shown promising results using the topical immune response modifier imiquimod. This study aims to investigate the efficacy, safety, and immunological response in patients with noninvasive vulvar Paget disease using a standardized treatment schedule with 5% imiquimod cream. Topical 5% imiquimod cream might be an effective and safe treatment alternative for vulvar Paget disease. The Paget Trial is a multicenter observational cohort study including eight tertiary referral hospitals in the Netherlands. It is ethically approved by the Medical-Ethical Committee of Arnhem-Nijmegen and registered in the Central Committee on Research Involving Human Subjects (CCMO) Register by as NL51648.091.14. Twenty patients with (recurrent) noninvasive vulvar Paget disease will be treated with topical 5% imiquimod cream three times a week for 16 weeks. The primary efficacy outcome is the reduction in lesion size at 12 weeks after end of treatment. Secondary outcomes are safety, immunological response, and quality of life. Safety will be assessed by evaluation of adverse events and tolerability of treatment. To evaluate the immunological response, various immunological markers will be tested on biopsy specimens taken before, during, and after treatment. Quality of life will be assessed with three questionnaires taken before, during, and after treatment. First results are expected in the summer of 2018. ClinicalTrials.gov NCT02385188; https://clinicaltrials.gov/ct2/show/NCT02385188 (Archived by WebCite at http://www.webcitation.org/6sXygHuhP). ©Michelle van der Linden, Kim Meeuwis, Colette van Hees, Eleonora van Dorst, Johan Bulten, Tjalling Bosse, Joanna IntHout, Dorry Boll, Brigitte Slangen, Manon van Seters, Marc van Beurden, Mariëtte van Poelgeest, Joanne de Hullu. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 06.09.2017.

Identification of hyper-extended crust east of Davie Ridge in the Mozambique Channel

NASA Astrophysics Data System (ADS)

Klimke, Jennifer; Franke, Dieter

2015-04-01

Davie Ridge is a ~1200 km wide, N-S trending bathymetrical high in the Mozambique Channel. Today, it is widely accepted that Davie Ridge is located along a fossil transform fault that was active during the Middle Jurassic and Early Cretaceous (~165-120 Ma). This transform fault results from the breakup of Gondwana, when Madagascar (together with India and Antarctica) drifted from its northerly position in the Gondwana Supercontinent (adjacent to the coasts of Tanzania, Somalia and Kenya) to its present position (e.g. Coffin and Rabinowitz, 1987; Rabinowitz et al., 1983; Segoufin and Patriat, 1980). The southward motion of Madagascar relative to Africa is constrained by the interpretation of magnetic anomalies in the Western Somali Basin, located north of Madagascar (e.g. Rabinowitz et al., 1983). According to Bird (2001), sheared margins share typical characteristics and a common evolution: 1. The transition from continental to oceanic crust is relatively abrupt (~ 50-80 km). 2. Along the continental side of the margin, complex rift basins form that display a wide range of faults. 3. Prominent marginal ridges form along the sheared margin that probably originate from the propagation of the oceanic spreading center along the plate boundary (Bird, 2001). In February and March 2014, a dense geophysical dataset (multichannel seismic, magnetics, gravimetry and bathymetry) with a total of 4300 profile km along the sheared margin was acquired with the R/V Sonne by the Federal Institute for Geosciences and Natural Resources (BGR). A special objective of the project, amongst others, is the characterization and interpretation of the continent-ocean transition seaward of Davie Ridge in the Mozambique Channel. Seismic profiles located east of Davie Ridge in the Western Somali Basin reveal a wide sequence of half-grabens bounded by listric normal faults. We tentatively suggest that this crust is of continental origin and results from rifting between Africa and Madagascar during the breakup of Gondwana. This implies that the continent-ocean transition is located at least ~ 150 km east of Davie Ridge. References Bird, D., 2001. Shear margins: Continent-ocean transform and fracture zone boundaries. The Leading Edge, 150-159. Coffin, M. F., und Rabinowitz, P. D., 1987. Reconstruction of Madagascar and Africa: Evidence from the Davie Fracture Zone and Western Somali Basin. Journal of Geophysical Research: Solid Earth, vol. 92, no. B9, 9385-9406. Rabinowitz, P.D., Coffin, M.F. and Falvey, D.A., 1983. The separation of Madagascar and Africa. Science 220, 67-69. Segoufin, J., und Patriat, P., 1980. Existence d'anomalies mesozoiques dans le bassin de Somalie. Implications pour les relations Afrique-Antarctique-Madagascar: C.R. Acad. Sci. Paris, v. 291, p. 85-88.

Marginalized zero-inflated negative binomial regression with application to dental caries

PubMed Central

Preisser, John S.; Das, Kalyan; Long, D. Leann; Divaris, Kimon

2015-01-01

The zero-inflated negative binomial regression model (ZINB) is often employed in diverse fields such as dentistry, health care utilization, highway safety, and medicine to examine relationships between exposures of interest and overdispersed count outcomes exhibiting many zeros. The regression coefficients of ZINB have latent class interpretations for a susceptible subpopulation at risk for the disease/condition under study with counts generated from a negative binomial distribution and for a non-susceptible subpopulation that provides only zero counts. The ZINB parameters, however, are not well-suited for estimating overall exposure effects, specifically, in quantifying the effect of an explanatory variable in the overall mixture population. In this paper, a marginalized zero-inflated negative binomial regression (MZINB) model for independent responses is proposed to model the population marginal mean count directly, providing straightforward inference for overall exposure effects based on maximum likelihood estimation. Through simulation studies, the finite sample performance of MZINB is compared to marginalized zero-inflated Poisson, Poisson, and negative binomial regression. The MZINB model is applied in the evaluation of a school-based fluoride mouthrinse program on dental caries in 677 children. PMID:26568034

Geomorphology of the Iberian Continental Margin

NASA Astrophysics Data System (ADS)

Maestro, Adolfo; López-Martínez, Jerónimo; Llave, Estefanía; Bohoyo, Fernando; Acosta, Juan; Hernández-Molina, F. Javier; Muñoz, Araceli; Jané, Gloria

2013-08-01

The submarine features and processes around the Iberian Peninsula are the result of a complex and diverse geological and oceanographical setting. This paper presents an overview of the seafloor geomorphology of the Iberian Continental Margin and the adjacent abyssal plains. The study covers an area of approximately 2.3 million km2, including a 50 to 400 km wide band adjacent to the coastline. The main morphological characteristics of the seafloor features on the Iberian continental shelf, continental slope, continental rise and the surrounding abyssal plains are described. Individual seafloor features existing on the Iberian Margin have been classified into three main groups according to their origin: tectonic and/or volcanic, depositional and erosional. Major depositional and erosional features around the Iberian Margin developed in late Pleistocene-Holocene times and have been controlled by tectonic movements and eustatic fluctuations. The distribution of the geomorphological features is discussed in relation to their genetic processes and the evolution of the margin. The prevalence of one or several specific processes in certain areas reflects the dominant morphotectonic and oceanographic controlling factors. Sedimentary processes and the resulting depositional products are dominant on the Valencia-Catalán Margin and in the northern part of the Balearic Promontory. Strong tectonic control is observed in the geomorphology of the Betic and the Gulf of Cádiz margins. The role of bottom currents is especially evident throughout the Iberian Margin. The Galicia, Portuguese and Cantabrian margins show a predominance of erosional features and tectonically-controlled linear features related to faults.

75 FR 81126 - Revisions to Lead Ambient Air Monitoring Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... Council (NRDC), the Missouri Coalition for the Environment Foundation, Physicians for Social... estimates from the 2002 and 2005 NEI (Table 2) and estimated design values (i.e., 3-month rolling average Pb... year of lead to protect public health with an adequate margin of safety. The available evidence...

77 FR 54402 - Dichlorvos (DDVP); Order Denying NRDC's Objections on Remand

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-05

... may be calculated separately for different age-based population groups (e.g., non-nursing infants) or... in conjunction with experimental toxicity data in assessing risk to humans from exposure to chemical substances. (Ref. 4). These numerical factors are designed to provide an additional margin of safety so that...

Meteorological Satellites (METSAT) and Earth Observing System (EOS) Advanced Microwave Sounding Unit-A (AMSU-A) Stress Analysis Report

NASA Technical Reports Server (NTRS)

Heffner, Robert

1996-01-01

Stress analysis of the primary structure of the Meteorological Satellites Project (METSAT) Advanced Microwave Sounding Units-A, A1 Module using static loads is presented. The structural margins of safety and natural frequency predictions for the METSAT design are reported.

Pilot Convective Weather Decision Making in En Route Airspace

NASA Technical Reports Server (NTRS)

Wu, Shu-Chieh; Gooding, Cary L.; Shelley, Alexandra E.; Duong, Constance G.; Johnson, Walter W.

2012-01-01

The present research investigates characteristics exhibited in pilot convective weather decision making in en route airspace. In a part-task study, pilots performed weather avoidance under various encounter scenarios. Results showed that the margins of safety that pilots maintain from storms are as fluid as deviation decisions themselves.

14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Stress analysis. 33.62 Section 33.62... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...

14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Stress analysis. 33.62 Section 33.62... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...

14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Stress analysis. 33.62 Section 33.62... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...

77 FR 21594 - Duke Energy Carolinas, LLC; Environmental Assessment and Finding of No Significant Impact, Oconee...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... of light-water nuclear power reactors provide adequate margins of safety during any condition of... toughness requirements for protection against pressurized thermal shock (PTS) events. The proposed action... for Protection Against Pressurized Thermal Shock Events,'' and 10 CFR part 50 Appendix G, ``Fracture...

Earth Observing System (EOS)/Advanced Microwave Sounding Unit-A (AMSU-A) Stress Analysis Report, A1 Module. Addendum 1

NASA Technical Reports Server (NTRS)

Ely, W.

1996-01-01

This addendum reports the structural margins of safety and natural frequency predictions for the design following the EOS AMSU-A1 Mechanical/Structural Subsystem Critical Design Review (CDR), based on a new and more refined finite element model.

40 CFR 264.90 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... care period; or (4) The Regional Administrator finds that there is no potential for migration of liquid... margin of safety in the prediction of potential migration of liquid, the owner or operator must base any predictions made under this paragraph on assumptions that maximize the rate of liquid migration. (5) He...

40 CFR 264.90 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... care period; or (4) The Regional Administrator finds that there is no potential for migration of liquid... margin of safety in the prediction of potential migration of liquid, the owner or operator must base any predictions made under this paragraph on assumptions that maximize the rate of liquid migration. (5) He...

Genome-Wide association mapping of loci associated with plant growth and forage production under salt stress in alfalfa (Medicago sativa L.)

USDA-ARS?s Scientific Manuscript database

Salinity tolerance is highly desirable to sustain alfalfa production in marginal lands that have been rendered saline. In this study, we used a diverse panel of alfalfa accessions for mapping loci associated with plant growth and forage production under salt stress using genome-wide association stud...

Opinion of the Scientific Committee on Consumer Safety (SCCS) - Final version of the opinion on Phenoxyethanol in cosmetic products.

PubMed

Lilienblum, Werner

2016-12-01

The SCCS considers 2-phenoxyethanol safe for use as a preservative with a maximum concentration of 1.0%, taking into account the information provided. The toxicokinetics default factor of 4.0 can be reduced to 1.0 yielding a minimum Margin of Safety (MoS) of 25 instead of 100 for the safety assessment of 2-phenoxyethanol. Therefore, the MoS of about 50 for children also covers this specific age group who might be higher exposed to 2-phenoxyethanol than adults. This Opinion does not take into account exposure from sources other than cosmetics. Copyright © 2016 Elsevier Inc. All rights reserved.

Genuine worker participation-an indispensable key to effective global OHS.

PubMed

Brown, Garrett

2009-01-01

Working conditions, including workplace safety, in global supply chains of products sold by transnational corporations have only marginally improved over the last 15 years despite the development of hundreds of corporate "codes of conduct," code monitoring systems, and an elaborate new "corporate social responsibility" industry. The two underlying reasons for the lack of significant change are: 1) a schizophrenic business model which fatally undermines "socially responsible" sourcing programs with unyielding dictates for the lowest possible production costs; and 2) the lack of any meaningful participation by shop-floor workers in plant safety programs. Only when trained, empowered, and active workers are an integral part of workplace safety programs will conditions improve over the long term.

Safety of needle electromyography of the diaphragm: Anterior lung margins in quietly breathing healthy subjects.

PubMed

Podnar, Simon; Doorduin, Jonne

2016-06-01

Controversy persists as to whether the lung interposes on the needle electrode insertion path during diaphragm electromyography (EMG). Using high-resolution ultrasonography, we measured the distances between the medial recess of the intercostal spaces (ICSs) around the mid-clavicular line (MCL) and the lung margin. We performed measurements bilaterally during quiet breathing in the seated and supine positions. We studied 10 young healthy men and found that, in the first ICS with the medial recess clearly (i.e., several cm) lateral to MCL (usually the eighth ICS), the distance between the recommended insertion site and the lung margin varied from 7.5 to 17 cm. The distance was slightly larger on the right side and in the supine position. This study confirms that properly conducted "trans-intercostal" needle EMG of the diaphragm is generally safe in healthy subjects. Muscle Nerve 54: 54-57, 2016. © 2015 Wiley Periodicals, Inc.

Margin-maximizing feature elimination methods for linear and nonlinear kernel-based discriminant functions.

PubMed

Aksu, Yaman; Miller, David J; Kesidis, George; Yang, Qing X

2010-05-01

Feature selection for classification in high-dimensional spaces can improve generalization, reduce classifier complexity, and identify important, discriminating feature "markers." For support vector machine (SVM) classification, a widely used technique is recursive feature elimination (RFE). We demonstrate that RFE is not consistent with margin maximization, central to the SVM learning approach. We thus propose explicit margin-based feature elimination (MFE) for SVMs and demonstrate both improved margin and improved generalization, compared with RFE. Moreover, for the case of a nonlinear kernel, we show that RFE assumes that the squared weight vector 2-norm is strictly decreasing as features are eliminated. We demonstrate this is not true for the Gaussian kernel and, consequently, RFE may give poor results in this case. MFE for nonlinear kernels gives better margin and generalization. We also present an extension which achieves further margin gains, by optimizing only two degrees of freedom--the hyperplane's intercept and its squared 2-norm--with the weight vector orientation fixed. We finally introduce an extension that allows margin slackness. We compare against several alternatives, including RFE and a linear programming method that embeds feature selection within the classifier design. On high-dimensional gene microarray data sets, University of California at Irvine (UCI) repository data sets, and Alzheimer's disease brain image data, MFE methods give promising results.

Estimation of the full marginal costs of port related truck traffic.

PubMed

Berechman, Joseph

2009-11-01

NY region is expected to grow by additional 1 million people by 2020, which translates into roughly 70 million more tons of goods to be delivered annually. Due to lack of rail capacity, mainly trucks will haul this volume of freight, challenging an already much constrained highway network. What are the total costs associated with this additional traffic, in particular, congestion, safety and emission? Since a major source of this expected flow is the Port of New York-New Jersey, this paper focuses on the estimation of the full marginal costs of truck traffic resulting from the further expansion of the port's activities.

Multispectral visualization of surgical safety-margins using fluorescent marker seeds

PubMed Central

Chin, Patrick TK; Beekman, Chantal AC; Buckle, Tessa; Josephson, Lee; van Leeuwen, Fijs WB

2012-01-01

Optical guidance provided by luminescent marker seeds may be suitable for intraoperative determination of appropriate resection margins. In phantom studies we compared the tissue penetration of several organic dyes and inorganic particles (quantum dots; QDs) after incorporation in experimental marker seeds. The tissue penetration of (near infra-) red organic dyes was much better than the penetration of dyes and QDs with an emission in the visible range. By combining 3 dyes in a single marker seed we were able to distinguish four depth ranges. The difference in tissue penetration between the dyes and QDS enabled depth estimation via a ‘traffic light’ approach. PMID:23133810

Environmental testing for new SOFIA flight hardware

NASA Astrophysics Data System (ADS)

Lachenmann, Michael; Wolf, Jürgen; Strecker, Rainer; Weckenmann, Benedikt; Trimpe, Fritz; Hall, Helen J.

2014-07-01

New flight hardware for the Stratospheric Observatory for Infrared Astronomy (SOFIA) has to be tested to prove its safety and functionality and to measure its performance under flight conditions. Although it is not expected to experience critical issues inside the pressurized cabin with close-to-normal conditions, all equipment has to be tested for safety margins in case of a decompression event and/or for unusual high temperatures, e.g. inside an electronic unit caused by a malfunction as well as unusual high ambient temperatures inside the cabin, when the aircraft is parked in a desert. For equipment mounted on the cavity side of the telescope, stratospheric conditions apply, i.e., temperatures from -40 °C to -60°C and an air pressure of about 0.1 bar. Besides safety aspects as not to endanger personnel or equipment, new hardware inside the cavity has to function and to perform to specifications under such conditions. To perform these tests, an environmental test laboratory was set up at the SOFIA Science Center at the NASA Ames Research Center, including a thermal vacuum chamber, temperature measurement equipment, and a control and data logging workstation. This paper gives an overview of the test and measurement equipment, shows results from the commissioning and characterization of the thermal vacuum chamber, and presents examples of the component tests that were performed so far. To test the focus position stability of optics when cooling them to stratospheric temperatures, an auto-collimation device has been developed. We will present its design and results from measurements on commercial off-the-shelf optics as candidates for the new Wide Field Imager for SOFIA as an example.

Divergent Hydraulic Safety Strategies in Three Co-occurring Anacardiaceae Tree Species in a Chinese Savanna

PubMed Central

Zhang, Shu-Bin; Zhang, Jiao-Lin; Cao, Kun-Fang

2017-01-01

Vulnerability segmentation, the condition under which plant leaves are more vulnerable to drought-induced cavitation than stems, may act as a “safety valve” to protect stems from hydraulic failure. Evergreen, winter-deciduous, and drought-deciduous tree species co-occur in tropical savannas, but there have been no direct studies on the role of vulnerability segmentation and stomatal regulation in maintaining hydraulic safety in trees with these three leaf phenologies. To this end, we selected three Anacardiaceae tree species co-occurring in a Chinese savanna, evergreen Pistacia weinmanniifolia, drought-deciduous Terminthia paniculata, and winter-deciduous Lannea coromandelica, to study inter-species differentiation in leaf and stem hydraulic safety. We found that the two deciduous species had significantly higher sapwood-specific hydraulic conductivity and leaf-specific hydraulic conductance than the evergreen species. Moreover, two deciduous species were more vulnerable to stem cavitation than the evergreen species, although both drought-deciduous species and evergreen species had drought-resistance leaves. The evergreen species maintained a wide hydraulic safety margin (HSM) in stems and leaves; which was achieved by embolism resistance of both stems and leaves and isohydric stomatal control. Both deciduous species had limited HSMs in stems and leaves, being isohydric in the winter-deciduous species and anisohydric in drought-deciduous species. The difference in water potential at 50% loss of hydraulic conductivity between the leaves and the terminal stems (P50leaf−stem) was positive in P. weinmanniifolia and L. coromandelica, whereas, T. paniculata exhibited a lack of vulnerability segmentation. In addition, differences in hydraulic architecture were found to be closely related to other structural traits, i.e., leaf mass per area, wood density, and sapwood anatomy. Overall, the winter-deciduous species exhibits a drought-avoidance strategy that maintains the hydraulic safety of the more carbon-costly stems by sacrificing cheaper and more vulnerable leaves, while the evergreen species exhibits a hydraulic strategy of drought tolerance with strong stomatal regulation. In contrast, the drought-deciduous species lacks vulnerability segmentation and sheds leaves at the expense of top shoots during peak drought. This study demonstrates that even sympatric tree species that differ in leaf phenology can exhibit divergent adaptive hydraulic safety strategies. PMID:28149302

Improvements and applications of COBRA-TF for stand-alone and coupled LWR safety analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avramova, M.; Cuervo, D.; Ivanov, K.

2006-07-01

The advanced thermal-hydraulic subchannel code COBRA-TF has been recently improved and applied for stand-alone and coupled LWR core calculations at the Pennsylvania State Univ. in cooperation with AREVA NP GmbH (Germany)) and the Technical Univ. of Madrid. To enable COBRA-TF for academic and industrial applications including safety margins evaluations and LWR core design analyses, the code programming, numerics, and basic models were revised and substantially improved. The code has undergone through an extensive validation, verification, and qualification program. (authors)

Nonclinical safety of mavrilimumab, an anti-GMCSF receptor alpha monoclonal antibody, in cynomolgus monkeys: Relevance for human safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan, Patricia C., E-mail: ryanp@medimmune.com; Sleeman, Matthew A.; Rebelatto, Marlon

Mavrilimumab (CAM-3001) is an investigational human IgG4 monoclonal antibody (MAb) targeting GM-CSF receptor alpha which is currently being developed for the treatment of RA. GM-CSF plays a central role in the pathogenesis of rheumatoid arthritis (RA) through the activation, differentiation, and survival of macrophages and neutrophils. To support clinical development, the nonclinical safety of mavrilimumab was evaluated in several studies with cynomolgus monkeys as the pharmacologically relevant species. Comprehensive toxicity parameters were assessed in each study, and treatment duration ranged from 4 to 26 weeks. Mavrilimumab has an acceptable safety profile in monkeys with no changes in any parameters othermore » than microscopic findings in lung. In several studies, minimal accumulation of foamy alveolar macrophages was observed. This finding was only seen in studies of at least 11 weeks duration, was reversible following a dose-free recovery period and was considered non-adverse. At higher dose levels (≥ 30 mg/kg/week), in a 26-week repeat-IV dose study, the presence of lung foreign material, cholesterol clefts, and granulomatous inflammation was also observed in a few animals and was considered adverse. The dose- and time-related accumulation of foamy macrophages in lung following exposure to mavrilimumab observed in several NHP studies was expected based upon the known role of GM-CSFRα signaling in the function of alveolar macrophages. Overall, a clean no-observed-adverse-effect-level (NOAEL) without any effects in lung was established and provided adequate clinical safety margins. In clinical studies in RA patients, mavrilimumab has demonstrated good clinical activity with adequate safety to support further clinical development. A Phase 2b study of mavrilimumab in subjects with RA is in progress. - Highlights: • Mavrilimumab is a MAB targeting GM-CSFRα being developed for RA therapy. • Mavrilimumab has an acceptable safety profile in cynomolgus monkeys. • Lung changes observed reflect role of GM-CSF in alveolar macrophage function. • High safety margins support continued clinical development of mavrilimumab.« less

Estimating the value of life and injury for pedestrians using a stated preference framework.

PubMed

Niroomand, Naghmeh; Jenkins, Glenn P

2017-09-01

The incidence of pedestrian death over the period 2010 to 2014 per 1000,000 in North Cyprus is about 2.5 times that of the EU, with 10.5 times more pedestrian road injuries than deaths. With the prospect of North Cyprus entering the EU, many investments need to be undertaken to improve road safety in order to reach EU benchmarks. We conducted a stated choice experiment to identify the preferences and tradeoffs of pedestrians in North Cyprus for improved walking times, pedestrian costs, and safety. The choice of route was examined using mixed logit models to obtain the marginal utilities associated with each attribute of the routes that consumers chose. These were used to estimate the individuals' willingness to pay (WTP) to save walking time and to avoid pedestrian fatalities and injuries. We then used the results to obtain community-wide estimates of the value of a statistical life (VSL) saved, the value of an injury (VI) prevented, and the value per hour of walking time saved. The estimate of the VSL was €699,434 and the estimate of VI was €20,077. These values are consistent, after adjusting for differences in incomes, with the median results of similar studies done for EU countries. The estimated value of time to pedestrians is €7.20 per person hour. The ratio of deaths to injuries is much higher for pedestrians than for road accidents, and this is completely consistent with the higher estimated WTP to avoid a pedestrian accident than to avoid a car accident. The value of time of €7.20 is quite high relative to the wages earned. Findings provide a set of information on the VRR for fatalities and injuries and the value of pedestrian time that is critical for conducing ex ante appraisals of investments to improve pedestrian safety. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Natural Gas Venting on the Northern Cascadia Margin

NASA Astrophysics Data System (ADS)

Scherwath, M.; Riedel, M.; Roemer, M.; Paull, C. K.; Spence, G.; Veloso, M.

2016-12-01

Over the past decades, hundreds of natural gas vents have been observed along the Northern Cascadia Margin in the Northeast Pacific, and we present a summary of these observations from offshore Vancouver Island, BC, Canada. We have gathered observed locations and analyzed original data from published literature as well as research cruises and fishing sonar from various archives. By far the highest accumulation of gas vent locations appear both shallow (100-200 m) and concentrated towards the mouth of the Juan de Fuca Strait, however these observations are naturally biased toward the distribution of the observation footprints. Normalized observations confirm the shallow high concentrations of gas vents but also establish some deeper sections of focused venting activity. We will speculate about the reasons behind the distribution, focus on specific examples, extrapolate for rough margin flux rate ranges and comment on short-comings and future directions for margin-wide gas vent studies.

Ku band airborne radar altimeter observations of marginal sea ice during the 1984 Marginal Ice Zone Experiment

NASA Technical Reports Server (NTRS)

Drinkwater, Mark R.

1991-01-01

Pulse-limited, airborne radar data taken in June and July 1984 with a 13.8-GHz altimeter over the Fram Strait marginal ice zone are analyzed with the aid of large-format aerial photography, airborne synthetic aperture radar data, and surface observations. Variations in the radar return pulse waveforms are quantified and correlated with ice properties recorded during the Marginal Ice Zone Experiment. Results indicate that the wide-beam altimeter is a flexible instrument, capable of identifying the ice edge with a high degree of accuracy, calculating the ice concentration, and discriminating a number of different ice classes. This suggests that microwave radar altimeters have a sensitivity to sea ice which has not yet been fully exploited. When fused with SSM/I, AVHRR and ERS-1 synthetic aperture radar imagery, future ERS-1 altimeter data are expected to provide some missing pieces to the sea ice geophysics puzzle.

Multiple outer-reef tracts along the south Florida bank margin: Outlier reefs, a new windward-margin model

USGS Publications Warehouse

Lidz, Barbara H.; Hine, A.C.; Shinn, Eugene A.; Kindinger, Jack G.

1991-01-01

High-resolution seismic-reflection profiles off the lower Florida Keys reveal a multiple outlier-reef tract system ~0.5 to 1.5 km sea-ward of the bank margin. The system is characterized by a massive, outer main reef tract of high (28 m) unburied relief that parallels the margin and at least two narrower, discontinuous reef tracts of lower relief between the main tract and the shallow bank-margin reefs. The outer tract is ~0.5 to 1 km wide and extends a distance of ~57 km. A single pass divides the outer tract into two main reefs. The outlier reefs developed on antecedent, low-gradient to horizontal offbank surfaces, interpreted to be Pleistocene beaches that formed terracelike features. Radiocarbon dates of a coral core from the outer tract confirm a pre-Holocene age. These multiple outlier reefs represent a new windward-margin model that presents a significant, unique mechanism for progradation of carbonate platforms during periods of sea-level fluctuation. Infilling of the back-reef terrace basins would create new terraced promontories and would extend or "step" the platform seaward for hundreds of metres. Subsequent outlier-reef development would produce laterally accumulating sequences.

Ultrasound-ultrasound image overlay fusion improves real-time control of radiofrequency ablation margin in the treatment of hepatocellular carcinoma.

PubMed

Minami, Yasunori; Minami, Tomohiro; Hagiwara, Satoru; Ida, Hiroshi; Ueshima, Kazuomi; Nishida, Naoshi; Murakami, Takamichi; Kudo, Masatoshi

2018-05-01

To assess the clinical feasibility of US-US image overlay fusion with evaluation of the ablative margin in radiofrequency ablation (RFA) for hepatocellular carcinoma (HCC). Fifty-three patients with 68 HCCs measuring 0.9-4.0 cm who underwent RFA guided by US-US overlay image fusion were included in this retrospective study. By an overlay of pre-/postoperative US, the tumor image could be projected onto the ablative hyperechoic zone. Therefore, the ablative margin three-dimensionally could be shown during the RFA procedure. US-US image overlay was compared to dynamic CT a few days after RFA for assessment of early treatment response. Accuracy of graded response was calculated, and the performance of US-US image overlay fusion was compared with that of CT using a Kappa agreement test. Technically effective ablation was achieved in a single session, and 59 HCCs (86.8 %) succeeded in obtaining a 5-mm margin on CT. The response with US-US image overlay correctly predicted early CT evaluation with an accuracy of 92.6 % (63/68) (k = 0.67; 95 % CI: 0.39-0.95). US-US image overlay fusion can be proposed as a feasible guidance in RFA with a safety margin and predicts early response of treatment assessment with high accuracy. • US-US image overlay fusion visualizes the ablative margin during RFA procedure. • Visualizing the margin during the procedure can prompt immediate complementary treatment. • US image fusion correlates with the results of early evaluation CT.

Role of imprint/exfoliative cytology in ulcerated skin neoplasms.

PubMed

Ramakrishnaiah, Vishnu Prasad Nelamangala; Babu, Ravindra; Pai, Dinker; Verma, Surendra Kumar

2013-12-01

Imprint cytology is a method of studying cells by taking an imprint from the cut surface of a wedge biopsy specimen or from the resected margins of a surgical specimen. It is rapid, simple and fairly accurate. Exfoliative cytology is an offshoot from the imprint cytology where in cells obtained from the surface of ulcers, either by scrape or brush, are analyzed for the presence of malignant cells. We undertook this study to see the role of imprint/exfoliative cytology in the diagnosis of ulcerated skin neoplasm and to check the adequacy of resected margins intra-operatively. This was a prospective investigative study conducted from September 2003 to July 2005. All patients presenting to surgical clinic with ulcerated skin and soft tissue tumours were included in the study. A wedge biopsy obtained from the ulcer and imprint smears were taken from the cut surface. Exfoliative cytology was analyzed from the surface smears. Wedge biopsy specimen was sent for histopathological (HPE) examination. The cytology and HPE were analyzed by a separate pathologist. Imprint cytology was also used to check the adequacy of resected margins in case of wide excision. This was compared with final HPE. Total of 107 patients was included in the present study and 474 imprint smears were done, with an average of 4.43 slides per lesion. Out of 59 wide excision samples, 132 imprint smears were prepared for assessing resected margins accounting for an average of 2.24 slides per each excised lesion. On combining imprint cytology with exfoliative cytology the overall sensitivity, specificity and positive predictive value were 90.38 %, 100 % and 90.38 % respectively. Only one out of 59 cases had a positive resected margin which was not picked by imprint cytology. Imprint cytology can be used for rapid and accurate diagnosis of various skin malignancies. It can also be used to check the adequacy of the resected margin intraoperatively.

Marginalizing Instrument Systematics in HST WFC3 Transit Light Curves

NASA Astrophysics Data System (ADS)

Wakeford, H. R.; Sing, D. K.; Evans, T.; Deming, D.; Mandell, A.

2016-03-01

Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3) infrared observations at 1.1-1.7 μm probe primarily the H2O absorption band at 1.4 μm, and have provided low-resolution transmission spectra for a wide range of exoplanets. We present the application of marginalization based on Gibson to analyze exoplanet transit light curves obtained from HST WFC3 to better determine important transit parameters such as Rp/R*, which are important for accurate detections of H2O. We approximate the evidence, often referred to as the marginal likelihood, for a grid of systematic models using the Akaike Information Criterion. We then calculate the evidence-based weight assigned to each systematic model and use the information from all tested models to calculate the final marginalized transit parameters for both the band-integrated and spectroscopic light curves to construct the transmission spectrum. We find that a majority of the highest weight models contain a correction for a linear trend in time as well as corrections related to HST orbital phase. We additionally test the dependence on the shift in spectral wavelength position over the course of the observations and find that spectroscopic wavelength shifts {δ }λ (λ ) best describe the associated systematic in the spectroscopic light curves for most targets while fast scan rate observations of bright targets require an additional level of processing to produce a robust transmission spectrum. The use of marginalization allows for transparent interpretation and understanding of the instrument and the impact of each systematic evaluated statistically for each data set, expanding the ability to make true and comprehensive comparisons between exoplanet atmospheres.

Marginalizing Instrument Systematics in HST WFC3 Transit Light Curves

NASA Technical Reports Server (NTRS)

Wakeford, H. R.; Sing, D.K.; Deming, D.; Mandell, A.

2016-01-01

Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3) infrared observations at 1.1-1.7 microns probe primarily the H2O absorption band at 1.4 microns, and have provided low-resolution transmission spectra for a wide range of exoplanets. We present the application of marginalization based on Gibson to analyze exoplanet transit light curves obtained from HST WFC3 to better determine important transit parameters such as "ramp" probability (R (sub p)) divided by "ramp" total (R (sub asterisk)), which are important for accurate detections of H2O. We approximate the evidence, often referred to as the marginal likelihood, for a grid of systematic models using the Akaike Information Criterion. We then calculate the evidence-based weight assigned to each systematic model and use the information from all tested models to calculate the final marginalized transit parameters for both the band-integrated and spectroscopic light curves to construct the transmission spectrum. We find that a majority of the highest weight models contain a correction for a linear trend in time as well as corrections related to HST orbital phase. We additionally test the dependence on the shift in spectral wavelength position over the course of the observations and find that spectroscopic wavelength shifts delta (sub lambda) times lambda) best describe the associated systematic in the spectroscopic light curves for most targets while fast scan rate observations of bright targets require an additional level of processing to produce a robust transmission spectrum. The use of marginalization allows for transparent interpretation and understanding of the instrument and the impact of each systematic evaluated statistically for each data set, expanding the ability to make true and comprehensive comparisons between exoplanet atmospheres.

Predictability of Recurrence using Immunohistochemistry to delineate Surgical Margins in mucosal Head and Neck Squamous Cell Carcinoma (PRISM-HNSCC): study protocol for a prospective, observational and bilateral study in Australia and India.

PubMed

Joseph, Sheela; Janakiraman, Rajinikanth; Chacko, Geeta; Jayaraj, Rama; Thomas, Mahiban; Thomas, Meera; Mukhopadhyay, Sramana

2017-10-15

Treatment failure and poor 5-year survival in mucosal head and neck squamous cell carcinoma (HNSCC) has remained unchanged for decades mainly due to advanced stage of presentation and high rates of recurrence. Incomplete surgical removal of the tumour, attributed to lack of reliable methods to delineate the surgical margins, is a major cause of disease recurrence. The predictability of recurrence using immunohistochemistry (IHC) to delineate surgical margins (PRISM) in mucosal HNSCC study aims to redefine margin status by identifying the true extent of the tumour at the molecular level by performing IHC with molecular markers, eukaryotic initiation factor, eIF4Eand tumour suppressor gene, p53, on the surgical margins and test the use of Lugol's iodine and fluorescence visualisation prior to the wide local excision. This article describes the study protocol at its pre - results stage. PRISM-HNSCC is a bilateral observational research being conducted in Darwin, Australia and Vellore, India. Individuals diagnosed with HNSCC will undergo the routine wide local excision of the tumour followed by histopathological assessment. Tumours with clear surgical margins that satisfy the exclusion criteria will be selected for further staining of the margins with eIF4E and p53 antibodies. Results of IHC staining will be correlated with recurrences in an attempt to predict the risk of disease recurrence. Patients in Darwin will undergo intraoperative staining of the lesion with Lugol's iodine and fluorescence visualisation to delineate the excision margins while patients in Vellore will not undertake these tests. The outcomes will be analysed. The PRISM-HNSCC study was approved by the institutional ethics committees in Darwin (Human Research Ethics Committee 13-2036) and Vellore (Institutional Review Board Min. no. 8967). Outcomes will be disseminated through publications in academic journals and presentations at educational meetings and conferences. It will be presented as dissertation at the Charles Darwin University. We will communicate the study results to both participating sites. Participating sites will communicate results with patients who have indicated an interest in knowing the results. Australian New Zealand Clinical Trials Registry (ACTRN12616000715471). © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Predictability of Recurrence using Immunohistochemistry to delineate Surgical Margins in mucosal Head and Neck Squamous Cell Carcinoma (PRISM-HNSCC): study protocol for a prospective, observational and bilateral study in Australia and India

PubMed Central

Joseph, Sheela; Janakiraman, Rajinikanth; Chacko, Geeta; Jayaraj, Rama; Thomas, Mahiban; Thomas, Meera; Mukhopadhyay, Sramana; Scott, Cameron

2017-01-01

Objectives Treatment failure and poor 5-year survival in mucosal head and neck squamous cell carcinoma (HNSCC) has remained unchanged for decades mainly due to advanced stage of presentation and high rates of recurrence. Incomplete surgical removal of the tumour, attributed to lack of reliable methods to delineate the surgical margins, is a major cause of disease recurrence. The predictability of recurrence using immunohistochemistry (IHC) to delineate surgical margins (PRISM) in mucosal HNSCC study aims to redefine margin status by identifying the true extent of the tumour at the molecular level by performing IHC with molecular markers, eukaryotic initiation factor, eIF4Eand tumour suppressor gene, p53, on the surgical margins and test the use of Lugol’s iodine and fluorescence visualisation prior to the wide local excision. This article describes the study protocol at its pre - results stage. Methods and analysis PRISM-HNSCC is a bilateral observational research being conducted in Darwin, Australia and Vellore, India. Individuals diagnosed with HNSCC will undergo the routine wide local excision of the tumour followed by histopathological assessment. Tumours with clear surgical margins that satisfy the exclusion criteria will be selected for further staining of the margins with eIF4E and p53 antibodies. Results of IHC staining will be correlated with recurrences in an attempt to predict the risk of disease recurrence. Patients in Darwin will undergo intraoperative staining of the lesion with Lugol’s iodine and fluorescence visualisation to delineate the excision margins while patients in Vellore will not undertake these tests. The outcomes will be analysed. Ethics and dissemination The PRISM-HNSCC study was approved by the institutional ethics committees in Darwin (Human Research Ethics Committee 13-2036) and Vellore (Institutional Review Board Min. no. 8967). Outcomes will be disseminated through publications in academic journals and presentations at educational meetings and conferences. It will be presented as dissertation at the Charles Darwin University. We will communicate the study results to both participating sites. Participating sites will communicate results with patients who have indicated an interest in knowing the results. Trial registration number Australian New Zealand Clinical Trials Registry (ACTRN12616000715471). PMID:29038175

Mesozoic evolution of northeast African shelf margin, Libya and Egypt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aadland, R.K.; Schamel, S.

1989-03-01

The present tectonic features of the northeast African shelf margin between the Nile delta and the Gulf of Sirte are products of (1) precursory late Paleozoic basement arches, (2) early Mesozoic rifting and plate separation, and (3) Late Cretaceous structural inversion. The 250 km-wide and highly differentiated Mesozoic passive margin in the Western Desert region of Egypt is developed above a broad northwest-trending Late Carboniferous basement arch. In northeastern Libya, in contrast, the passive margin is restricted to just the northernmost Cyrenaica platform, where subsidence was extremely rapid in the Jurassic and Early Cretaceous. The boundary between the Western Desertmore » basin and the Cyrenaica platform is controlled by the western flank of the basement arch. In the middle Cretaceous (100-90 Ma), subsidence accelerated over large areas of the Western desert, further enhancing a pattern of east-west-trending subbasins. This phase of rapid subsidence was abruptly ended about 80 Ma by the onset of structural inversion that uplifted the northern Cyrenaica shelf margin and further differentiated the Western Desert subbasin along a northeasterly trend.« less

Forecasting for a Remote Island: A Class Exercise.

NASA Astrophysics Data System (ADS)

Riordan, Allen J.

2003-06-01

Students enrolled in a satellite meteorology course at North Carolina State University, Raleigh, recently had an unusual opportunity to apply their forecast skills to predict wind and weather conditions for a remote site in the Southern Hemisphere. For about 40 days starting in early February 2001, students used satellite and model guidance to develop forecasts to support a research team stationed on Bouvet Island (54°26S, 3°24E). Internet products together with current output from NCEP's Aviation (AVN) model supported the activity. Wind forecasts were of particular interest to the Bouvet team because violent winds often developed unexpectedly and posed a safety hazard.Results were encouraging in that 24-h wind speed forecasts showed reasonable reliability over a wide range of wind speeds. Forecasts for 48 h showed only marginal skill, however. Two critical events were well forecasted-the major February storm with wind speeds of over 120 kt and a brief calm period following several days of strong winds in early March. The latter forecast proved instrumental in recovering the research team.

Biosonar behaviour of free-ranging porpoises

PubMed Central

Akamatsu, Tomonari; Wang, Ding; Wang, Kexiong; Naito, Yasuhiko

2005-01-01

Detecting objects in their paths is a fundamental perceptional function of moving organisms. Potential risks and rewards, such as prey, predators, conspecifics or non-biological obstacles, must be detected so that an animal can modify its behaviour accordingly. However, to date few studies have considered how animals in the wild focus their attention. Dolphins and porpoises are known to actively use sonar or echolocation. A newly developed miniature data logger attached to a porpoise allows for individual recording of acoustical search efforts and inspection distance based on echolocation. In this study, we analysed the biosonar behaviour of eight free-ranging finless porpoises (Neophocaena phocaenoides) and demonstrated that these animals inspect the area ahead of them before swimming silently into it. The porpoises inspected distances up to 77 m, whereas their swimming distance without using sonar was less than 20 m. The inspection distance was long enough to ensure a wide safety margin before facing real risks or rewards. Once a potential prey item was detected, porpoises adjusted their inspection distance from the remote target throughout their approach. PMID:15888412

Rapid Prototyping of Continuous Fiber Reinforced Ceramic Matrix Composites

NASA Technical Reports Server (NTRS)

Vaidyanathan, R.; Green, C.; Phillips, T.; Cipriani, R.; Yarlagadda, S.; Gillespie, J.; Effinger, M.; Cooper, K. C.; Gordon, Gail (Technical Monitor)

2002-01-01

For ceramics to be used as structural components in high temperature applications, their fracture toughness is improved by embedding continuous ceramic fibers. Ceramic matrix composite (CMC) materials allow increasing the overall operating temperature, raising the temperature safety margins, avoiding the need for cooling, and improving the damping capacity, while reducing the weight at the same time. They also need to be reliable and available in large quantities as well. In this paper, an innovative rapid prototyping technique to fabricate continuous fiber reinforced ceramic matrix composites is described. The process is simple, robust and will be widely applicable to a number of high temperature material systems. This technique was originally developed at the University of Delaware Center for Composite Materials (UD-CCM) for rapid fabrication of polymer matrix composites by a technique called automated tow placement or ATP. The results of mechanical properties and microstructural characterization are presented, together with examples of complex shapes and parts. It is believed that the process will be able to create complex shaped parts at an order of magnitude lower cost than current CVI and PIP processes.

Herbs as an antioxidant arsenal for periodontal diseases

PubMed Central

Ramesh, Asha; Varghese, Sheeja Saji; Doraiswamy, Jayakumar Nadathur; Malaiappan, Sankari

2016-01-01

Herbal medicines have long been used as a traditional mode of therapy for various ailments in India. They are being used increasingly as dietary supplements to ward off common diseases. Periodontal diseases are highly prevalent and can affect up to 90% of the world population. Gingivitis is the mild form whereas periodontitis results in an irreversible loss of supporting structures of the teeth. Even though periodontal pathogens form a crucial component in the etiopathogenesis of periodontitis, there is a growing body of evidence suggesting oxidative stress playing a pivotal role in the disease initiation and progression. Studies have shown a direct correlation between increased levels of biomarkers for tissue damage induced by reactive oxygen species (ROS) to the severity of periodontal disease. Thus, the focus of attention has revolved back to herbal medicines due to their wide spectrum of biological and medicinal activities, lower costs, and higher safety margin. Internet databases Pubmed and Google Scholar were searched, and the most relevant articles were considered for review. This review briefly describes the various herbs with antioxidant capacity and their potency in the treating periodontal disease. PMID:27069730

Integration of remote sensing and surface geophysics in the detection of faults

NASA Technical Reports Server (NTRS)

Jackson, P. L.; Shuchman, R. A.; Wagner, H.; Ruskey, F.

1977-01-01

Remote sensing was included in a comprehensive investigation of the use of geophysical techniques to aid in underground mine placement. The primary objective was to detect faults and slumping, features which, due to structural weakness and excess water, cause construction difficulties and safety hazards in mine construction. Preliminary geologic reconnaissance was performed on a potential site for an underground oil shale mine in the Piceance Creek Basin of Colorado. LANDSAT data, black and white aerial photography and 3 cm radar imagery were obtained. LANDSAT data were primarily used in optical imagery and digital tape forms, both of which were analyzed and enhanced by computer techniques. The aerial photography and radar data offered supplemental information. Surface linears in the test area were located and mapped principally from LANDSAT data. A specific, relatively wide, linear pointed directly toward the test site, but did not extend into it. Density slicing, ratioing, and edge enhancement of the LANDSAT data all indicated the existence of this linear. Radar imagery marginally confirmed the linear, while aerial photography did not confirm it.

Co-occurring woody species have diverse hydraulic strategies and mortality rates during an extreme drought: Belowground hydraulic failure during drought

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Daniel M.; Domec, Jean-Christophe; Carter Berry, Z.

From 2011 to 2013, Texas experienced its worst drought in recorded history. This event provided a unique natural experiment to assess species-specific responses to extreme drought and mortality of four co-occurring woody species: Quercus fusiformis, Diospyros texana, Prosopis glandulosa and Juniperus ashei. We examined hypothesized mechanisms that could promote these species’ diverse mortality patterns using post-drought measurements on surviving trees coupled to retrospective process modeling. The species exhibited a wide range of gas exchange responses, hydraulic strategies, and mortality rates. Multiple proposed indices of mortality mechanisms were not consistent with the observed mortality patterns across species, including measures of iso/anisohydry,more » photosynthesis, carbohydrate depletion, and hydraulic safety margins. Large losses of growing season whole-tree conductance (driven by belowground losses of conductance), and shallower rooting depths, were associated with species that exhibited greater mortality. Based on this retrospective analysis, we suggest that species more vulnerable to drought were more likely to have succumbed to hydraulic failure belowground.« less

Early Oral Tongue Squamous Cell Carcinoma: Sampling of Margins From Tumor Bed and Worse Local Control.

PubMed

Maxwell, Jessica H; Thompson, Lester D R; Brandwein-Gensler, Margaret S; Weiss, Bernhard G; Canis, Martin; Purgina, Bibianna; Prabhu, Arpan V; Lai, Chi; Shuai, Yongli; Carroll, William R; Morlandt, Anthony; Duvvuri, Umamaheswar; Kim, Seungwon; Johnson, Jonas T; Ferris, Robert L; Seethala, Raja; Chiosea, Simion I

2015-12-01

Positive margins are associated with poor prognosis among patients with oral tongue squamous cell carcinoma (SCC). However, wide variation exists in the margin sampling technique. To determine the effect of the margin sampling technique on local recurrence (LR) in patients with stage I or II oral tongue SCC. A retrospective study was conducted from January 1, 1986, to December 31, 2012, in 5 tertiary care centers following tumor resection and elective neck dissection in 280 patients with pathologic (p)T1-2 pN0 oral tongue SCC. Analysis was conducted from June 1, 2013, to January 20, 2015. In group 1 (n = 119), tumor bed margins were not sampled. In group 2 (n = 61), margins were examined from the glossectomy specimen, found to be positive or suboptimal, and revised with additional tumor bed margins. In group 3 (n = 100), margins were primarily sampled from the tumor bed without preceding examination of the glossectomy specimen. The margin status (both as a binary [positive vs negative] and continuous [distance to the margin in millimeters] variable) and other clinicopathologic parameters were compared across the 3 groups and correlated with LR. Local recurrence. Age, sex, pT stage, lymphovascular or perineural invasion, and adjuvant radiation treatment were similar across the 3 groups. The probability of LR-free survival at 3 years was 0.9 and 0.8 in groups 1 and 3, respectively (P = .03). The frequency of positive glossectomy margins was lowest in group 1 (9 of 117 [7.7%]) compared with groups 2 and 3 (28 of 61 [45.9%] and 23 of 95 [24.2%], respectively) (P < .001). Even after excluding cases with positive margins, the median distance to the closest margin was significantly narrower in group 3 (2 mm) compared with group 1 (3 mm) (P = .008). The status (positive vs negative) of margins obtained from the glossectomy specimen correlated with LR (P = .007), while the status of tumor bed margins did not. The status of the tumor bed margin was 24% sensitive (95% CI, 16%-34%) and 92% specific (95% CI, 85%-97%) for detecting a positive glossectomy margin. The margin sampling technique affects local control in patients with oral tongue SCC. Reliance on margin sampling from the tumor bed is associated with worse local control, most likely owing to narrower margin clearance and greater incidence of positive margins. A resection specimen-based margin assessment is recommended.

Early Oral Tongue Squamous Cell Carcinoma Sampling of Margins From Tumor Bed and Worse Local Control

PubMed Central

Maxwell, Jessica H.; Thompson, Lester D. R.; Brandwein-Gensler, Margaret S.; Weiss, Bernhard G.; Canis, Martin; Purgina, Bibianna; Prabhu, Arpan V.; Lai, Chi; Shuai, Yongli; Carroll, William R.; Morlandt, Anthony; Duvvuri, Umamaheswar; Kim, Seungwon; Johnson, Jonas T.; Ferris, Robert L.; Seethala, Raja; Chiosea, Simion I.

2017-01-01

IMPORTANCE Positive margins are associated with poor prognosis among patients with oral tongue squamous cell carcinoma (SCC). However, wide variation exists in the margin sampling technique. OBJECTIVE To determine the effect of the margin sampling technique on local recurrence (LR) in patients with stage I or II oral tongue SCC. DESIGN, SETTING, AND PARTICIPANTS A retrospective study was conducted from January 1, 1986, to December 31, 2012, in 5 tertiary care centers following tumor resection and elective neck dissection in 280 patients with pathologic (p)T1-2 pN0 oral tongue SCC. Analysis was conducted from June 1, 2013, to January 20, 2015. INTERVENTIONS In group 1 (n = 119), tumor bed margins were not sampled. In group 2 (n = 61), margins were examined from the glossectomy specimen, found to be positive or suboptimal, and revised with additional tumor bed margins. In group 3 (n = 100), margins were primarily sampled from the tumor bed without preceding examination of the glossectomy specimen. The margin status (both as a binary [positive vs negative] and continuous [distance to the margin in millimeters] variable) and other clinicopathologic parameters were compared across the 3 groups and correlated with LR. MAIN OUTCOMES AND MEASURES Local recurrence. RESULTS Age, sex, pT stage, lymphovascular or perineural invasion, and adjuvant radiation treatment were similar across the 3 groups. The probability of LR-free survival at 3 years was 0.9 and 0.8 in groups 1 and 3, respectively (P = .03). The frequency of positive glossectomy margins was lowest in group 1 (9 of 117 [7.7%]) compared with groups 2 and 3 (28 of 61 [45.9%] and 23 of 95 [24.2%], respectively) (P < .001). Even after excluding cases with positive margins, the median distance to the closest margin was significantly narrower in group 3 (2 mm) compared with group 1 (3 mm) (P = .008). The status (positive vs negative) of margins obtained from the glossectomy specimen correlated with LR (P = .007), while the status of tumor bed margins did not. The status of the tumor bed margin was 24% sensitive (95% CI, 16%-34%) and 92% specific (95% CI, 85%-97%) for detecting a positive glossectomy margin. CONCLUSIONS AND RELEVANCE The margin sampling technique affects local control in patients with oral tongue SCC. Reliance on margin sampling from the tumor bed is associated with worse local control, most likely owing to narrower margin clearance and greater incidence of positive margins. A resection specimen–based margin assessment is recommended. PMID:26225798

Extensive Gravity Sliding of Late Jurassic-Cretaceous Age along the Northern Yucatan Margin of the Gulf of Mexico

NASA Astrophysics Data System (ADS)

Steier, A.; Mann, P.

2017-12-01

Gravity slides on salt or shale detachment surfaces linking updip extension with down dip compression have been described from several margins of the Gulf of Mexico (GOM). In a region 250 km offshore from the southwestern coast of Florida, the late Jurassic section near Destin Dome and Desoto Canyon has undergone late Jurassic to Cretaceous gravity sliding and downdip dispersion of rigid blocks along the top of the underlying Louann salt. Yet there has been no previous study of similar structural styles on the slope and deep basin of its late Jurassic conjugate margin located 200 km offshore of the northern margin of the Yucatan Peninsula. This study describes an extensive area of Mesozoic gravity sliding from the northern Yucatan slope using a grid of 2D seismic data covering a 134,000 km2 area of the northern Yucatan margin tied to nine wells. These data allow the northern Yucatan margin to be divided into three slope and basinal provinces: 1) a 225 km length of the northeastern margin consisting of late Jurassic-Cretaceous section that is not underlain by salt, exhibits no gravity sliding features, and has sub-horizontal dips; 2) a 120 km length of the north-central Yucatan margin with gravity slide features characterized by an 80-km-wide updip zone of normal faults occupying the shelf edge and upper slope and a 50-km-wide downdip zone of folds and thrust faults at the base of the slope; the slide area exhibits multiple detached slide blocks composed of late Jurassic sandstones and marine mudstones separated by intervening salt rollers; growth wedges adjacent to listric, normal faults suggest a gradual and long-lived downdip motion of rigid fault blocks throughout much of the late Jurassic and Cretaceous rather than a catastrophic and instantaneous collapse of the shelf edge; the basal, normal detachment fault averages 3° in dip and is overlain by salt that varies from 0-500 ms in time thickness; by the end of the Cretaceous, most gravity sliding and vertical salt movement off the north-central Yucatan had ceased and was capped by the post-sliding Cretaceous-Paleocene boundary deposit (KPBD); and 3) a 150 km length of the southwestern margin with the largest thicknesses of salt; smaller salt rollers are less common as large diapirs are frequent and extensively deform the late Mesozoic section as well as overlying younger strata.

Wide-angle seismic data from the East Sicily margin: Imaging the deep structure of a Tethyan transform margin and the modern Calabria subduction lateral slab tear.

NASA Astrophysics Data System (ADS)

Dellong, D.; Klingelhoefer, F.; Kopp, H.; Gutscher, M. A.

2016-12-01

It is generally accepted that a STEP fault (Subduction Tear Edge Propagator) has accommodated the roll back of the Ionian Slab along the eastern Sicily Margin since 6 to 7 Ma. However the location of this lithospheric scale tear fault, and its surface expression is controversial. Constrain by numerous bathymetric imaging and shallow sub-surface multi-channels seismic (MCS) studies, variety of fault geometry was proposed. Moreover the role of the Malta Escarpment in this geodynamic system also remain the object of debates. It may be linked to the opening of the Ionian basin during a phase of strike-slip rifting since more than 180 Ma. Here we present the results of modelling of two wide-angle seismic profiles from the DIONYSUS survey (R/V Meteor, Oct. 2014). The first profile (DY-P3) was recorded by 25 Ocean- Bottom-Seismometers (OBS) and 3 land stations, and the second profile (DY-P1) by 52 OBS. Forward modelling of both profiles reveals a zone of abrupt crustal thinning from about 30 km below the Hyblean plateau and East-Sicily continental domain, to values of 8-15 km over a short lateral distance of 20-30 km. In the northern profile (DY-P3) the crust east of this abrupt thinning is of transitional thickness (15 km) and characterized by seismic velocities and velocity gradients similar to thinned continental crust. In the southern profile (DY-P1) this crust is 6-8 km thick, and the velocity gradients are close to those of oceanic crust. On this profile about 50-60 km eastward from the base of the Malta Escarpment, a lateral change of crustal velocities was modelled. Here a recent shallow transtensional deformation has been observed in MCS data at the position of this structure and linked to an elongated basin visible in the bathymetry and was linked to the STEP fault location. The results of the wide-angle seismic modelling suggest an ancient origin for the Malta Escarpment, formed as a transform margin during opening of the Ionian Basin about 180 Ma ago. The geometry of the modern day STEP fault is largely obscured in the northern profile because of the superposition of the structures with the ancient Tethyan transform Margin. In the southern wide-angle seismic profile these two structures are distinct and this allow us to conclude that the Malta Escarpment offshore SE Sicily has not been re-activated by the recent STEP-fault activity.

21 CFR 250.105 - Gelsemium-containing preparations regarded as prescription drugs.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Gelsemium-containing preparations regarded as prescription drugs. 250.105 Section 250.105 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... prescription drugs. It is the consensus of informed medical opinion that the margin of safety between the...

78 FR 11754 - Approval and Promulgation of Implementation Plans; Tennessee: Knox County Supplement Motor...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... December 18, 2012, (77 FR 74820), EPA proposed to approve through parallel processing Tennessee's October... well as changes to future vehicle mix assumptions, that influence the emission estimations. TDEC has... 2014. \\2\\ A safety margin is the difference between the attainment level of emissions from all source...

Fire Detector

NASA Technical Reports Server (NTRS)

1978-01-01

An early warning fire detection sensor developed for NASA's Space Shuttle Orbiter is being evaluated as a possible hazard prevention system for mining operations. The incipient Fire Detector represents an advancement over commercially available smoke detectors in that it senses and signals the presence of a fire condition before the appearance of flame and smoke, offering an extra margin of safety.

Protect Children Instead of Guns, 2001.

ERIC Educational Resources Information Center

Children's Defense Fund, Washington, DC.

Noting that firearms outnumber children by a margin of almost three to one in the United States, this report advocates gun safety policies to protect children. The report provides information on trends in youth firearm deaths and finds the statistics alarming, despite recent decline. The first of three tables in the report delineates 1979-1999…

Nurturing Care for Young Children under Conditions of Fragility and Conflict

ERIC Educational Resources Information Center

Richter, Linda M.; Lye, Stephen J.; Proulx, Kerrie

2018-01-01

Forced displacement worldwide is at its highest in decades and millions of young children are living in conflict zones, in transitional or enduring refugee contexts, and in demographically diverse marginalized and informal settlements. There is a huge unmet need for delivering early childhood development interventions to ensure the safety and…

78 FR 42809 - Self-Regulatory Organizations; Fixed Income Clearing Corporation; Order Approving Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... remain subject to all of the GSD's normal risk management procedures, which include marking member portfolios to the market on an intraday basis and charging variation margins accordingly.\\19\\ These risk management procedures should help ensure the safety of the securities and funds handled by the GSD in...

77 FR 67679 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses and Combined Licenses...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-13

... diesel generator surveillance requirements. Margin of safety is related to the ability of the fission... surveillance tests, allowing testing in any MODE of operation. The Division 3 AC sources, including the diesel generator (DG) and its associated emergency loads are accident mitigating features, not accident initiators...

Some bivariate distributions for modeling the strength properties of lumber

Treesearch

Richard A. Johnson; James W. Evans; David W. Green

Accurate modeling of the joint stochastic nature of the strength properties of dimension lumber is essential to the determination of reliability-based design safety factors. This report reviews the major techniques for obtaining bivariate distributions and then discusses bivariate distributions whose marginal distributions suggest they might be useful for modeling the...

Evolution of Devonian carbonate-shelf margin, Nevada

USGS Publications Warehouse

Morrow, J.R.; Sandberg, C.A.

2008-01-01

The north-trending, 550-km-long Nevada segment of the Devonian carbonate-shelf margin, which fringed western North America, evidences the complex interaction of paleotectonics, eustasy, biotic changes, and bolide impact-related influences. Margin reconstruction is complicated by mid-Paleozoic to Paleogene compressional tectonics and younger extensional and strike-slip faulting. Reports published during the past three decades identify 12 important events that influenced development of shelf-margin settings; in chronological order, these are: (1) Early Devonian inheritance of Silurian stable shelf inargin, (2) formation of Early to early Middle 'Devonian shelf-margin basins, (3) propradation of later Middle Devonian shelf margin, (4) late Middle Devonian Taghanic ondap and continuing long-term Frasnian transgression, (5) initiation of latest Middle Devonian to early Frasnian proto-Antler orogenic forebulge, (6) mid-Frasnian Alamo Impact, (7) accelerated development of proto-Antler forebulge and backbulge Pilot basin, (8) global late Frasnian sentichatovae sea-level rise, (9) end-Frasnian sea-level fluctuations and ensuing mass extinction, (10) long-term Famennian regression and continept-wide erosion, (11) late Famennian emergence: of Ahtler orogenic highlands, and (12) end-Devonian eustatic sea-level fall. Although of considerable value for understanding facies relationships and geometries, existing standard carbonate platform-margin models developed for passive settings else-where do not adequately describe the diverse depositional and, structural settings along the Nevada Devonian platform margin. Recent structural and geochemical studies suggest that the Early to Middle Devonian-shelf-margin basins may have been fault-bound and controlled by inherited Precambrian structure. Subsequently, the migrating latest Middle to Late Devonian Antler orogenic forebulge exerted a dominant control on shelf-margin position, morphology, and sedimentation. ??Geological Society of America.

Genetic divergence and signatures of natural selection in marginal populations of a keystone, long-lived conifer, Eastern White Pine (Pinus strobus) from Northern Ontario.

PubMed

Chhatre, Vikram E; Rajora, Om P

2014-01-01

Marginal populations are expected to provide the frontiers for adaptation, evolution and range shifts of plant species under the anticipated climate change conditions. Marginal populations are predicted to show genetic divergence from central populations due to their isolation, and divergent natural selection and genetic drift operating therein. Marginal populations are also expected to have lower genetic diversity and effective population size (Ne) and higher genetic differentiation than central populations. We tested these hypotheses using eastern white pine (Pinus strobus) as a model for keystone, long-lived widely-distributed plants. All 614 eastern white pine trees, in a complete census of two populations each of marginal old-growth, central old-growth, and central second-growth, were genotyped at 11 microsatellite loci. The central populations had significantly higher allelic and genotypic diversity, latent genetic potential (LGP) and Ne than the marginal populations. However, heterozygosity and fixation index were similar between them. The marginal populations were genetically diverged from the central populations. Model testing suggested predominant north to south gene flow in the study area with curtailed gene flow to northern marginal populations. Signatures of natural selection were detected at three loci in the marginal populations; two showing divergent selection with directional change in allele frequencies, and one balancing selection. Contrary to the general belief, no significant differences were observed in genetic diversity, differentiation, LGP, and Ne between old-growth and second-growth populations. Our study provides information on the dynamics of migration, genetic drift and selection in central versus marginal populations of a keystone long-lived plant species and has broad evolutionary, conservation and adaptation significance.

Interleukins in gingival crevicular fluid in patients with definitive full-coverage restorations.

PubMed

Chang, Kai-Chiao J; Wheater, Michelle A; Cabanilla Jacobs, Levyee; Litonjua, Luis A

2014-04-01

The objective of this study was to determine interleukin (IL)-1α and IL-8 levels in the gingival crevicular fluid (GCF) of patients with different levels of crown margin placements. Samples of GCF were obtained from 12 study participants with definitive full-coverage restorations with supragingival or equigingival crown margin placements. The periodontal status of the volunteers ranged from healthy to generalized severe periodontitis. Pocket depth and bleeding on probing were assessed at the clinical examination, and interleukin concentrations were determined by enzyme-linked immunosorbent assay (ELISA). Analysis of variance (ANOVA) was used to statistically compare interleukin concentrations between the control, supragingival, and equigingival GCF samples. Compared to controls (60.4 ± 8.9 pg/mL), the average IL-1α concentration in the GCF samples surrounding the supragingival margins was 53.8 ± 9.7 pg/mL and was 110.5 ± 23.3 pg/mL in the equigingival margins. Compared to controls (59.0 ± 14.1 pg/mL), the average IL-8 concentration in the supragingival margins was 46.9 ± 9.7 pg/mL and was 131.4 ± 27.5 pg/mL in the equigingival margins. The trend of higher levels of interleukins in GCF corresponding to equigingival margins was consistent, as was the trend of lower concentrations in supragingival margins compared to the controls; however, statistical significance was not achieved because of the wide biological variation within and between patients. In conclusion, differences in GCF IL-1α and IL-8 concentrations were observed when comparing fixed crown restorations with equigingival and supragingival margins. Gingival inflammation may be dependent on the periodontal condition in addition to restoration or margin placement.

Genetic Divergence and Signatures of Natural Selection in Marginal Populations of a Keystone, Long-Lived Conifer, Eastern White Pine (Pinus strobus) from Northern Ontario

PubMed Central

Chhatre, Vikram E.; Rajora, Om P.

2014-01-01

Marginal populations are expected to provide the frontiers for adaptation, evolution and range shifts of plant species under the anticipated climate change conditions. Marginal populations are predicted to show genetic divergence from central populations due to their isolation, and divergent natural selection and genetic drift operating therein. Marginal populations are also expected to have lower genetic diversity and effective population size (N e) and higher genetic differentiation than central populations. We tested these hypotheses using eastern white pine (Pinus strobus) as a model for keystone, long-lived widely-distributed plants. All 614 eastern white pine trees, in a complete census of two populations each of marginal old-growth, central old-growth, and central second-growth, were genotyped at 11 microsatellite loci. The central populations had significantly higher allelic and genotypic diversity, latent genetic potential (LGP) and N e than the marginal populations. However, heterozygosity and fixation index were similar between them. The marginal populations were genetically diverged from the central populations. Model testing suggested predominant north to south gene flow in the study area with curtailed gene flow to northern marginal populations. Signatures of natural selection were detected at three loci in the marginal populations; two showing divergent selection with directional change in allele frequencies, and one balancing selection. Contrary to the general belief, no significant differences were observed in genetic diversity, differentiation, LGP, and N e between old-growth and second-growth populations. Our study provides information on the dynamics of migration, genetic drift and selection in central versus marginal populations of a keystone long-lived plant species and has broad evolutionary, conservation and adaptation significance. PMID:24859159

Microbial communities in methane seep sediments along US Atlantic Margin are structured by organic matter and seepage dynamics

NASA Astrophysics Data System (ADS)

Graw, M. F.; Pohlman, J.; Treude, T.; Ruppel, C. D.; Colwell, F. S.

2016-12-01

Methane seeps are dynamic environments on continental margins where subsurface methane reaches the ocean. Microbial communities play a critical role in carbon cycling within seep sediments via organic carbon degradation, methane production, and anaerobic oxidation of methane (AOM), which consumes 20-80% of methane in seep sediments. However, biogeochemical controls on microbial community structure at seeps on a margin-wide scale remain unclear. The passive US Atlantic Margin (USAM) has been identified as a region of active methane seepage. Passive margin seeps have traditionally been understudied relative to seeps on active margins. Passive margins exhibit large cross-margin variability in organic carbon deposition and are anticipated to have divergent seep dynamics from active margins. Thus, the USAM offers a unique opportunity to investigate controls on microbial communities in seep sediments. We undertook analysis of microbial communities inhabiting seep sediments at 6 biogeochemically distinct sites along the USAM. Microbiological samples were co-located with measurements of sediment geochemistry and AOM and sulfate reduction rates. Illumina sequencing of the 16S rRNA gene, using both universal (83 samples) and archaeal-specific (64 samples) primers, and the mcrA gene (18 samples) identified 44 bacterial phyla and 7 archaeal phyla. Seeps in canyons and on open slope, likely representing high and low organic content sediments, hosted distinct communities; the former was dominated by ammonia-oxidizing Marine Group I Thaumarchaeota and the latter by mixotrophic Hadesarchaeota. Seep stability also impacted microbial community structure, and in particular the establishment of an AOM community rather than a Bathyarchaeota-dominated community. These findings contribute to understanding how microbial communities are structured within methane seep sediments and pave the way for investigating broad differences in carbon cycling between seeps on passive and active margins.

Multiscale nonlinear microscopy and widefield white light imaging enables rapid histological imaging of surgical specimen margins

PubMed Central

Giacomelli, Michael G.; Yoshitake, Tadayuki; Cahill, Lucas C.; Vardeh, Hilde; Quintana, Liza M.; Faulkner-Jones, Beverly E.; Brooker, Jeff; Connolly, James L.; Fujimoto, James G.

2018-01-01

The ability to histologically assess surgical specimens in real-time is a long-standing challenge in cancer surgery, including applications such as breast conserving therapy (BCT). Up to 40% of women treated with BCT for breast cancer require a repeat surgery due to postoperative histological findings of close or positive surgical margins using conventional formalin fixed paraffin embedded histology. Imaging technologies such as nonlinear microscopy (NLM), combined with exogenous fluorophores can rapidly provide virtual H&E imaging of surgical specimens without requiring microtome sectioning, facilitating intraoperative assessment of margin status. However, the large volume of typical surgical excisions combined with the need for rapid assessment, make comprehensive cellular resolution margin assessment during surgery challenging. To address this limitation, we developed a multiscale, real-time microscope with variable magnification NLM and real-time, co-registered position display using a widefield white light imaging system. Margin assessment can be performed rapidly under operator guidance to image specific regions of interest located using widefield imaging. Using simulated surgical margins dissected from human breast excisions, we demonstrate that multi-centimeter margins can be comprehensively imaged at cellular resolution, enabling intraoperative margin assessment. These methods are consistent with pathology assessment performed using frozen section analysis (FSA), however NLM enables faster and more comprehensive assessment of surgical specimens because imaging can be performed without freezing and cryo-sectioning. Therefore, NLM methods have the potential to be applied to a wide range of intra-operative applications. PMID:29761001

Patient engagement at the margins: Health care providers' assessments of engagement and the structural determinants of health in the safety-net.

PubMed

Fleming, Mark D; Shim, Janet K; Yen, Irene H; Thompson-Lastad, Ariana; Rubin, Sara; Van Natta, Meredith; Burke, Nancy J

2017-06-01

Increasing "patient engagement" has become a priority for health care organizations and policy-makers seeking to reduce cost and improve the quality of care. While concepts of patient engagement have proliferated rapidly across health care settings, little is known about how health care providers make use of these concepts in clinical practice. This paper uses 20 months of ethnographic and interview research carried out from 2015 to 2016 to explore how health care providers working at two public, urban, safety-net hospitals in the United States define, discuss, and assess patient engagement. We investigate how health care providers describe engagement for high cost patients-the "super-utilizers" of the health care system-who often face complex challenges related to socioeconomic marginalization including poverty, housing insecurity, exposure to violence and trauma, cognitive and mental health issues, and substance use. The health care providers in our study faced institutional pressure to assess patient engagement and to direct care towards engaged patients. However, providers considered such assessments to be highly challenging and oftentimes inaccurate, particularly because they understood low patient engagement to be the result of difficult socioeconomic conditions. Providers tried to navigate the demand to assess patient engagement in care by looking for explicit positive and negative indicators of engagement, while also being sensitive to more subtle and intuitive signs of engagement for marginalized patients. Copyright © 2017 Elsevier Ltd. All rights reserved.

Patient Engagement at the Margins: Health Care Providers’ Assessments of Engagement and the Structural Determinants of Health in the Safety-net

PubMed Central

Fleming, Mark D.; Shim, Janet K.; Yen, Irene; Thompson-Lastad, Ariana; Rubin, Sara; Van Natta, Meredith; Burke, Nancy J.

2017-01-01

Increasing “patient engagement” has become a priority for health care organizations and policy-makers seeking to reduce cost and improve the quality of care. While concepts of patient engagement have proliferated rapidly across health care settings, little is known about how health care providers make use of these concepts in clinical practice. This paper uses 20 months of ethnographic and interview research carried out from 2015 to 2016 to explore how health care providers working at two public, urban, safety-net hospitals in the United States define, discuss, and assess patient engagement. We investigate how health care providers describe engagement for high cost patients—the “super-utilizers” of the health care system—who often face complex challenges related to socioeconomic marginalization including poverty, housing insecurity, exposure to violence and trauma, cognitive and mental health issues, and substance use. The health care providers in our study faced institutional pressure to assess patient engagement and to direct care towards engaged patients. However, providers considered such assessments to be highly challenging and oftentimes inaccurate, particularly because they understood low patient engagement to be the result of difficult socioeconomic conditions. Providers tried to navigate the demand to assess patient engagement in care by looking for explicit positive and negative indicators of engagement, while also being sensitive to more subtle and intuitive signs of engagement for marginalized patients. PMID:28445806

Correlation between safety climate and contractor safety assessment programs in construction

PubMed Central

Sparer, EH1; Murphy, LA; Taylor, KM; Dennerlein, Jt

2015-01-01

Background Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Methods 401 construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. Results There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers’ safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. Conclusions A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. PMID:24038403

Medicare Payment Penalties and Safety Net Hospital Profitability: Minimal Impact on These Vulnerable Hospitals.

PubMed

Bazzoli, Gloria J; Thompson, Michael P; Waters, Teresa M

2018-02-08

To examine relationships between penalties assessed by Medicare's Hospital Readmission Reduction Program and Value-Based Purchasing Program and hospital financial condition. Centers for Medicare and Medicaid Services, American Hospital Association, and Area Health Resource File data for 4,824 hospital-year observations. Bivariate and multivariate analysis of pooled cross-sectional data. Safety net hospitals have significantly higher HRRP/VBP penalties, but, unlike nonsafety net hospitals, increases in their penalty rate did not significantly affect their total margins. Safety net hospitals appear to rely on nonpatient care revenues to offset higher penalties for the years studied. While reassuring, these funding streams are volatile and may not be able to compensate for cumulative losses over time. © Health Research and Educational Trust.

Bicycle Lanes Versus Wide Curb Lanes: Operational and Safety Findings and Countermeasure Recommendations

DOT National Transportation Integrated Search

1999-10-01

This report presents operational and safety findings and countermeasure recommendations from a comparative analysis of bicycle lanes (BLs) versus wide curb lanes (WCLs). The primary analysis was based on videotapes of almost 4,600 bicyclists in Santa...

Structure and evolution of the eastern Gulf of Aden conjugate margins from seismic reflection data

NASA Astrophysics Data System (ADS)

d'Acremont, Elia; Leroy, Sylvie; Beslier, Marie-Odile; Bellahsen, Nicolas; Fournier, Marc; Robin, Cécile; Maia, Marcia; Gente, Pascal

2005-03-01

The Gulf of Aden is a young and narrow oceanic basin formed in Oligo-Miocene time between the rifted margins of the Arabian and Somalian plates. Its mean orientation, N75°E, strikes obliquely (50°) to the N25°E opening direction. The western conjugate margins are masked by Oligo-Miocene lavas from the Afar Plume. This paper concerns the eastern margins, where the 19-35 Ma breakup structures are well exposed onshore and within the sediment-starved marine shelf. Those passive margins, about 200 km distant, are non-volcanic. Offshore, during the Encens-Sheba cruise we gathered swath bathymetry, single-channel seismic reflection, gravity and magnetism data, in order to compare the structure of the two conjugate margins and to reconstruct the evolution of the thinned continental crust from rifting to the onset of oceanic spreading. Between the Alula-Fartak and Socotra major fracture zones, two accommodation zones trending N25°E separate the margins into three N110°E-trending segments. The margins are asymmetric: offshore, the northern margin is narrower and steeper than the southern one. Including the onshore domain, the southern rifted margin is about twice the breadth of the northern one. We relate this asymmetry to inherited Jurassic/Cretaceous rifts. The rifting obliquity also influenced the syn-rift structural pattern responsible for the normal faults trending from N70°E to N110°E. The N110°E fault pattern could be explained by the decrease of the influence of rift obliquity towards the central rift, and/or by structural inheritance. The transition between the thinned continental crust and the oceanic crust is characterized by a 40 km wide zone. Our data suggest that its basement is made up of thinned continental crust along the southern margin and of thinned continental crust or exhumed mantle, more or less intruded by magmatic rocks, along the northern margin.

Marginal Fit Comparison of CAD/CAM Crowns Milled from Two Different Materials.

PubMed

Azarbal, Atousa; Azarbal, Mohsen; Engelmeier, Robert L; Kunkel, Thomas C

2018-06-01

To evaluate the marginal fit of CAD/CAM copings milled from hybrid ceramic (Vita Enamic) blocks and lithium disilicate (IPS e.max CAD) blocks, and to evaluate the effect of crystallization firing on the marginal fit of lithium disilicate copings. A standardized metal die with a 1-mm-wide shoulder finish line was imaged using the CEREC AC Bluecam. The coping was designed using CEREC 3 software. The design was used to fabricate 15 lithium disilicate and 15 hybrid ceramic copings. Design and milling were accomplished by one operator. The copings were seated on the metal die using a pressure clamp with a uniform pressure of 5.5 lbs. A Macroview Microscope (14×) was used for direct viewing of the marginal gap. Four areas were imaged on each coping (buccal, distal, lingual, mesial). Image analysis software was used to measure the marginal gaps in μm at 15 randomly selected points on each of the four surfaces. A total of 60 measurements were made per specimen. For lithium disilicate copings the measurements for marginal gap were made before and after crystallization firing. Data were analyzed using paired t-test and Kruskal-Wallis test. The overall mean difference in marginal gap between the hybrid ceramic and crystallized lithium disilicate copings was statistically significant (p < 0.01). Greater mean marginal gaps were measured for crystallized lithium disilicate copings. The overall mean difference in marginal gap before and after firing (precrystallized and crystallized lithium disilicate copings) showed an average of 62 μm increase in marginal gap after firing. This difference was also significant (p < 0.01). A significant difference exists in the marginal gap discrepancy when comparing hybrid ceramic and lithium disilicate CAD/CAM crowns. Also crystallization firing can result in a significant increase in the marginal gap of lithium disilicate CAD/CAM crowns. © 2017 by the American College of Prosthodontists.

The STAT7 Code for Statistical Propagation of Uncertainties In Steady-State Thermal Hydraulics Analysis of Plate-Fueled Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunn, Floyd E.; Hu, Lin-wen; Wilson, Erik

The STAT code was written to automate many of the steady-state thermal hydraulic safety calculations for the MIT research reactor, both for conversion of the reactor from high enrichment uranium fuel to low enrichment uranium fuel and for future fuel re-loads after the conversion. A Monte-Carlo statistical propagation approach is used to treat uncertainties in important parameters in the analysis. These safety calculations are ultimately intended to protect against high fuel plate temperatures due to critical heat flux or departure from nucleate boiling or onset of flow instability; but additional margin is obtained by basing the limiting safety settings onmore » avoiding onset of nucleate boiling. STAT7 can simultaneously analyze all of the axial nodes of all of the fuel plates and all of the coolant channels for one stripe of a fuel element. The stripes run the length of the fuel, from the bottom to the top. Power splits are calculated for each axial node of each plate to determine how much of the power goes out each face of the plate. By running STAT7 multiple times, full core analysis has been performed by analyzing the margin to ONB for each axial node of each stripe of each plate of each element in the core.« less

Crustal Structure of the Ionian Basin and Eastern Sicily Margin: Results From a Wide-Angle Seismic Survey

NASA Astrophysics Data System (ADS)

Dellong, David; Klingelhoefer, Frauke; Kopp, Heidrun; Graindorge, David; Margheriti, Lucia; Moretti, Milena; Murphy, Shane; Gutscher, Marc-Andre

2018-03-01

In the Ionian Sea (central Mediterranean) the slow convergence between Africa and Eurasia results in the formation of a narrow subduction zone. The nature of the crust of the subducting plate remains debated and could represent the last remnants of the Neo-Tethys ocean. The origin of the Ionian basin is also under discussion, especially concerning the rifting mechanisms as the Malta Escarpment could represent a remnant of this opening. This subduction retreats toward the south-east (motion occurring since the last 35 Ma) but is confined to the narrow Ionian basin. A major lateral slab tear fault is required to accommodate the slab roll-back. This fault is thought to propagate along the eastern Sicily margin but its precise location remains controversial. This study focuses on the deep crustal structure of the eastern Sicily margin and the Malta Escarpment. We present two two-dimensional P wave velocity models obtained from forward modeling of wide-angle seismic data acquired onboard the R/V Meteor during the DIONYSUS cruise in 2014. The results image an oceanic crust within the Ionian basin as well as the deep structure of the Malta Escarpment, which presents characteristics of a transform margin. A deep and asymmetrical sedimentary basin is imaged south of the Messina strait and seems to have opened between the Calabrian and Peloritan continental terranes. The interpretation of the velocity models suggests that the tear fault is located east of the Malta Escarpment, along the Alfeo fault system.

Dermatofibrosarcoma protuberans of the vulva: margins assessment and reconstructive options - a report of two cases.

PubMed

Bertolli, Eduardo; Bretchbuhl, Eduard Renè; Camarço, William Ricardo; Campagnari, Mariane; Molina, André Sapata; Baiocchi, Glauco; Macedo, Mariana Petaccia; Pinto, Clovis Antonio; Cunha, Isabela Werneck; Neto, João Pedreira

2014-12-29

Dermatofibrosarcoma Protuberans (DFSP) of the vulva is rare and oncologic surgery with free margins may lead to severe functional damage, requiring multidisciplinary approach regarding resection, margin assessment and reconstruction.Case Report: Two cases of DFSP in vulva were treated in a single institution. A 28-year-old patient with an incisional biopsy in the vulvar region revealing DFSP underwent a partial vulvectomy with clitoris preservation. Pathological studies revealed free margins and reconstructive surgery was performed. This patient is disease free in a 40 months follow up. The other, a 57-year-old patient was also referred after an incomplete resection of a DFSP in the vulvar region. A 1-cm margim resection followed by Complete Circumferential and Peripheral Deep Margin Assessment (CCPDMA) was performed. Although the upper lateral margin was positive, it was possible to perform another wide local excision with preservation of the clitoris and primary closure. DFSP of the vulva requires an accurate evaluation of margins, resections following oncological principles and reconstruction. Although being a very challenging lesion that usually implies difficult surgical management, if treated in a multidisciplinary environment, with surgical oncologists, experienced dermatopathologists and reconstructive surgeons can achieve good results. Even in difficult cases that presents with large lesions and compromising challenging areas, a complete oncologic resection can be performed minimizing functional damage for the patient.

The Afar-Red Sea-Gulf of Aden volcanic margins system : early syn-rift segmentation and tectono-magmatic evolution

NASA Astrophysics Data System (ADS)

Stab, Martin; Leroy, Sylvie; Bellahsen, Nicolas; Pik, Raphaël; Ayalew, Dereje; Yirgu, Gezahegn; Khanbari, Khaled

2017-04-01

The Afro-Arabian rift system is characterized by complex interactions between magmatism and rifting, leading to long-term segmentation of the associated continental margins. However, past studies focused on specific rift segments and no attempt has yet been made to reconcile them into a single comprehensive geodynamic model. To address this, we present interpretations of seismic profiles offshore the Eritrea-Yemeni margins in the southern Red Sea and the Yemeni margin in the Gulf of Aden and reassess the regional geodynamic evolution including the new tectonic evolution of the Central Afar Magmatic margin. We point out the role of two major transform zones in structuring the volcanism and faulting of the Red Sea-Afar-Aden margins. We show that those transform zones not only control the present-day rift organization, but were also active since the onset of rifting in Oligocene times. Early syn-rift transform zones control the emplacement and the development of seaward-dipping-reflector wedges immediately after the Continental Flood basalts (30 Ma), and are closely associated with mantle plume melts in the course of the segment extension. The margins segmentation thus appears to reflect the underlying mantle dynamics and thermal anomaly, which have directly influenced the style of rifting (wide vs. narrow rift), in controlling the development of preferential lithospheric thinning and massive transfer of magmas in the crust.

The impact of frozen sections on final surgical margins in squamous cell carcinoma of the oral cavity and lips: a retrospective analysis over an 11 years period

PubMed Central

2011-01-01

Background Taking intraoperative frozen sections (FS) is a widely used procedure in oncologic surgery. However so far no evidence of an association of FS analysis and premalignant changes in the surgical margin exists. Therefore, the aim of this study was to evaluate the impact of FS on different categories of the final margins of squamous cell carcinoma (SCC) of the oral cavity and lips. Methods FS, pT-stage, grading, and tumor localization of 178 patients with SCC of the oral cavity and lips were compared by uni- and multivariate analysis in patients with positive, dysplastic and negative surgical margin status. Results Performed on 111 patients (62.4%), intraoperative FS did not have any statistically significant influence on final margin status, independent of whether it was positive (p = 0.40), dysplastic (p = 0.70), or negative (p = 0.70). Positive surgical margins in permanent sections were significantly associated with pT4-tumors (OR 5.61, p = 0.001). The chance for negative margins in permanent sections was significantly higher in tumors located in the tongue (OR 4.70, p = 0.01). Conclusions Our data suggests that intraoperative FS in SCC can be useful in selected cases. However it is not advisable as a routine approach. PMID:22208692

Marginal Accuracy and Internal Fit of 3-D Printing Laser-Sintered Co-Cr Alloy Copings.

PubMed

Kim, Myung-Joo; Choi, Yun-Jung; Kim, Seong-Kyun; Heo, Seong-Joo; Koak, Jai-Young

2017-01-23

Laser sintered technology has been introduced for clinical use and can be utilized more widely, accompanied by the digitalization of dentistry and the development of direct oral scanning devices. This study was performed with the aim of comparing the marginal accuracy and internal fit of Co-Cr alloy copings fabricated by casting, CAD/CAM (Computer-aided design/Computer-assisted manufacture) milled, and 3-D laser sintered techniques. A total of 36 Co-Cr alloy crown-copings were fabricated from an implant abutment. The marginal and internal fit were evaluated by measuring the weight of the silicone material, the vertical marginal discrepancy using a microscope, and the internal gap in the sectioned specimens. The data were statistically analyzed by One-way ANOVA (analysis of variance), a Scheffe's test, and Pearson's correlation at the significance level of p = 0.05, using statistics software. The silicone weight was significantly low in the casting group. The 3-D laser sintered group showed the highest vertical discrepancy, and marginal-, occlusal-, and average- internal gaps ( p < 0.05). The CAD/CAM milled group revealed a significantly high axial internal gap. There are moderate correlations between the vertical marginal discrepancy and the internal gap variables ( r = 0.654), except for the silicone weight. In this study, the 3-D laser sintered group achieved clinically acceptable marginal accuracy and internal fit.

Marginal Accuracy and Internal Fit of 3-D Printing Laser-Sintered Co-Cr Alloy Copings

PubMed Central

Kim, Myung-Joo; Choi, Yun-Jung; Kim, Seong-Kyun; Heo, Seong-Joo; Koak, Jai-Young

2017-01-01

Laser sintered technology has been introduced for clinical use and can be utilized more widely, accompanied by the digitalization of dentistry and the development of direct oral scanning devices. This study was performed with the aim of comparing the marginal accuracy and internal fit of Co-Cr alloy copings fabricated by casting, CAD/CAM (Computer-aided design/Computer-assisted manufacture) milled, and 3-D laser sintered techniques. A total of 36 Co-Cr alloy crown-copings were fabricated from an implant abutment. The marginal and internal fit were evaluated by measuring the weight of the silicone material, the vertical marginal discrepancy using a microscope, and the internal gap in the sectioned specimens. The data were statistically analyzed by One-way ANOVA (analysis of variance), a Scheffe’s test, and Pearson’s correlation at the significance level of p = 0.05, using statistics software. The silicone weight was significantly low in the casting group. The 3-D laser sintered group showed the highest vertical discrepancy, and marginal-, occlusal-, and average- internal gaps (p < 0.05). The CAD/CAM milled group revealed a significantly high axial internal gap. There are moderate correlations between the vertical marginal discrepancy and the internal gap variables (r = 0.654), except for the silicone weight. In this study, the 3-D laser sintered group achieved clinically acceptable marginal accuracy and internal fit. PMID:28772451

A test of the hydraulic vulnerability segmentation hypothesis in angiosperm and conifer tree species

DOE PAGES

Johnson, Daniel M.; Wortemann, Remi; McCulloh, Katherine A.; ...

2016-05-04

Water transport from soils to the atmosphere is critical for plant growth and survival. However, we have a limited understanding about many portions of the whole-tree hydraulic pathway, because the vast majority of published information is on terminal branches. Our understanding of mature tree trunk hydraulic physiology, in particular, is limited. The hydraulic vulnerability segmentation hypothesis (HVSH) stipulates that distal portions of the plant (leaves, branches and roots) should be more vulnerable to embolism than trunks, which are non-redundant organs that require a massive carbon investment. In the current study, we compared vulnerability to loss of hydraulic function, leaf andmore » xylem water potentials and the resulting hydraulic safety margins (in relation to the water potential causing 50% loss of hydraulic conductivity) in leaves, branches, trunks and roots of four angiosperms and four conifer tree species. Across all species, our results supported strongly the HVSH as leaves and roots were less resistant to embolism than branches or trunks. However, branches were consistently more resistant to embolism than any other portion of the plant, including trunks. Also, calculated whole-tree vulnerability to hydraulic dysfunction was much greater than vulnerability in branches. This was due to hydraulic dysfunction in roots and leaves at less negative water potentials than those causing branch or trunk dysfunction. Leaves and roots had narrow or negative hydraulic safety margins, but trunks and branches maintained positive safety margins. By using branch-based hydraulic information as a proxy for entire plants, much research has potentially overestimated embolism resistance, and possibly drought tolerance, for many species. This study highlights the necessity to reconsider past conclusions made about plant resistance to drought based on branch xylem only. As a result, this study also highlights the necessity for more research of whole-plant hydraulic physiology to better understand strategies of plant drought tolerance and the critical control points within the hydraulic pathway.« less

A test of the hydraulic vulnerability segmentation hypothesis in angiosperm and conifer tree species

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Daniel M.; Wortemann, Remi; McCulloh, Katherine A.

Water transport from soils to the atmosphere is critical for plant growth and survival. However, we have a limited understanding about many portions of the whole-tree hydraulic pathway, because the vast majority of published information is on terminal branches. Our understanding of mature tree trunk hydraulic physiology, in particular, is limited. The hydraulic vulnerability segmentation hypothesis (HVSH) stipulates that distal portions of the plant (leaves, branches and roots) should be more vulnerable to embolism than trunks, which are non-redundant organs that require a massive carbon investment. In the current study, we compared vulnerability to loss of hydraulic function, leaf andmore » xylem water potentials and the resulting hydraulic safety margins (in relation to the water potential causing 50% loss of hydraulic conductivity) in leaves, branches, trunks and roots of four angiosperms and four conifer tree species. Across all species, our results supported strongly the HVSH as leaves and roots were less resistant to embolism than branches or trunks. However, branches were consistently more resistant to embolism than any other portion of the plant, including trunks. Also, calculated whole-tree vulnerability to hydraulic dysfunction was much greater than vulnerability in branches. This was due to hydraulic dysfunction in roots and leaves at less negative water potentials than those causing branch or trunk dysfunction. Leaves and roots had narrow or negative hydraulic safety margins, but trunks and branches maintained positive safety margins. By using branch-based hydraulic information as a proxy for entire plants, much research has potentially overestimated embolism resistance, and possibly drought tolerance, for many species. This study highlights the necessity to reconsider past conclusions made about plant resistance to drought based on branch xylem only. As a result, this study also highlights the necessity for more research of whole-plant hydraulic physiology to better understand strategies of plant drought tolerance and the critical control points within the hydraulic pathway.« less

NASA's Spaceliner Investment Area Technology Activities

NASA Technical Reports Server (NTRS)

Hueter, Uwe; Lyles, Garry M. (Technical Monitor)

2001-01-01

NASA's has established long term goals for access-to-space. The third generation launch systems are to be fully reusable and operational around 2025. The goals for the third generation launch system are to significantly reduce cost and improve safety over current conditions. The Advanced Space Transportation Program Office (ASTP) at the NASA's Marshall Space Flight Center in Huntsville, AL has the agency lead to develop space transportation technologies. Within ASTP, under the Spaceliner Investment Area, third generation technologies are being pursued in the areas of propulsion, airframes, integrated vehicle health management (IVHM), avionics, power, operations, and range. The ASTP program will mature these technologies through both ground and flight system testing. The Spaceliner Investment Area plans to mature vehicle technologies to reduce the implementation risks for future commercially developed reusable launch vehicles (RLV). The plan is to substantially increase the design and operating margins of the third generation RLV (the Space Shuttle is the first generation) by incorporating advanced technologies in propulsion, materials, structures, thermal protection systems, avionics, and power. Advancements in design tools and better characterization of the operational environment will allow improvements in design margins. Improvements in operational efficiencies will be provided through use of advanced integrated health management, operations, and range technologies. The increase in margins will allow components to operate well below their design points resulting in improved component operating life, reliability, and safety which in turn reduces both maintenance and refurbishment costs. These technologies have the potential of enabling horizontal takeoff by reducing the takeoff weight and achieving the goal of airline-like operation. These factors in conjunction with increased flight rates from an expanding market will result in significant improvements in safety and reductions in operational costs of future vehicles. The paper describes current status, future plans and technologies that are being matured by the Spaceliner Investment Area under the Advanced Space Transportation Program Office.

Financial Stability of Level I Trauma Centers Within Safety-Net Hospitals.

PubMed

Knowlton, Lisa M; Morris, Arden M; Tennakoon, Lakshika; Spain, David A; Staudenmayer, Kristan L

2018-04-20

Level I trauma centers often exist within safety-net hospitals (SNHs), facilities servicing high proportions of low-income and uninsured patients. Given the current health care funding environment, trauma centers within SNHs may be at particular risk. Using California as a model, we hypothesized that SNHs with trauma centers vary in terms of financial stability. We performed a retrospective cohort study using data from publicly available financial disclosure reports from California's Office of Statewide Health Planning and Development. Safety-net hospitals were identified from the California Association of Public Hospitals and Health Systems. The primary outcomes metric for financial performance was operating margin. California hospitals with Level I trauma centers were analyzed (11 SNH sites, 2 non SNH). The SNHs did not behave uniformly, and were clustered into county-owned SNHs (36%, n = 4) and nonprofit-owned SNHs (64%, n = 7). Mean operating margins for county SNHs, nonprofit SNHs, and non SNHs were -16.5%, 8.4%, and 9.5%, respectively (p < 0.001). From 2010 to 2015, operating margins improved for all hospitals, partly due to increases in the percent of insured patients and changes in payer mix. Nonprofit SNHs had a payer mix similar to that of non SNHs; county SNHs had the highest proportions of MediCal (California Medicaid) (45% vs 36% vs 12%, respectively, p < 0.001) and uninsured patients (17% vs 5% vs 0%, respectively, p < 0.001) compared with nonprofit SNHs and non SNHs, respectively. The majority (85%) of Level I trauma centers are within SNHs, whose financial stability is highly variable. A group of SNHs rely on infusions of government funds and are therefore susceptible to changes in policy. These findings suggest deliberate funding efforts are critical to protect the health of the US academic trauma system. Copyright © 2018 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

A randomized trial on screening for social determinants of health: the iScreen study.

PubMed

Gottlieb, Laura; Hessler, Danielle; Long, Dayna; Amaya, Anais; Adler, Nancy

2014-12-01

There is growing interest in clinical screening for pediatric social determinants of health, but little evidence on formats that maximize disclosure rates on a wide range of potentially sensitive topics. We designed a study to examine disclosure rates and hypothesized that there would be no difference in disclosure rates on face-to-face versus electronic screening formats for items other than highly sensitive items. We conducted a randomized trial of electronic versus face-to-face social screening formats in a pediatric emergency department. Consenting English-speaking and Spanish-speaking adult caregivers familiar with the presenting child's household were randomized to social screening via tablet computer (with option for audio assist) versus a face-to-face interview conducted by a fully bilingual/bicultural researcher. Almost all caregivers (96.8%) reported at least 1 social need, but rates of reporting on the more sensitive issues (household violence and substance abuse) were significantly higher in electronic format, and disclosure was marginally higher in electronic format for financial insecurity and neighborhood and school safety. There was a significant difference in the proportion of social needs items with higher endorsement in the computer-based group (70%) than the face-to-face group (30%). Pediatric clinical sites interested in incorporating caregiver-reported socioeconomic, environmental, and behavioral needs screening should consider electronic screening when feasible, particularly when assessing sensitive topics such as child safety and household member substance use. Copyright © 2014 by the American Academy of Pediatrics.

Safety and Tumor-specificity of Cetuximab-IRDye800 for Surgical Navigation in Head and Neck Cancer

PubMed Central

Rosenthal, Eben L; Warram, Jason M; de Boer, Esther; Chung, Thomas K; Korb, Melissa L; Brandwein-Gensler, Margie; Strong, Theresa V; Schmalbach, Cecelia E; Morlandt, Anthony B; Agarwal, Garima; Hartman, Yolanda E; Carroll, William R; Richman, Joshua S; Clemons, Lisa K; Nabell, Lisle M; Zinn, Kurt R

2016-01-01

Purpose Positive margins dominate clinical outcomes after surgical resections in most solid cancer types including head and neck squamous cell carcinoma. Unfortunately, surgeons remove cancer in the same manner they have for a century with complete dependence on subjective tissue changes to identify cancer in the operating room. To effect change, we hypothesize that epidermal growth factor receptor (EGFR) can be targeted for safe and specific real-time localization of cancer. Experimental design A dose escalation study of cetuximab conjugated to IRDye800 was performed in patients (n=12) undergoing surgical resection of squamous cell carcinoma arising in the head and neck. Safety and pharmacokinetic data were obtained out to 30 days post-infusion. Multi-instrument fluorescence imaging was performed in the operating room and in surgical pathology. Results There were no grade 2 or higher adverse events attributable to cetuximab-IRDye800. Fluorescence imaging with an intraoperative, wide-field device successfully differentiated tumor from normal tissue during resection with an average tumor-to-background ratio of 5.2 in the highest dose range. Optical imaging identified opportunity for more precise identification of tumor during the surgical procedure and during the pathological analysis of tissues ex-vivo. Fluorescence levels positively correlated with EGFR levels. Conclusion We demonstrate for the first time that commercially available antibodies can be fluorescently labeled and safely administered to humans to identify cancer with sub-millimeter resolution, which has the potential to improve outcomes in clinical oncology. PMID:25904751

Adaptive Flight Control for Aircraft Safety Enhancements

NASA Technical Reports Server (NTRS)

Nguyen, Nhan T.; Gregory, Irene M.; Joshi, Suresh M.

2008-01-01

This poster presents the current adaptive control research being conducted at NASA ARC and LaRC in support of the Integrated Resilient Aircraft Control (IRAC) project. The technique "Approximate Stability Margin Analysis of Hybrid Direct-Indirect Adaptive Control" has been developed at NASA ARC to address the needs for stability margin metrics for adaptive control that potentially enables future V&V of adaptive systems. The technique "Direct Adaptive Control With Unknown Actuator Failures" is developed at NASA LaRC to deal with unknown actuator failures. The technique "Adaptive Control with Adaptive Pilot Element" is being researched at NASA LaRC to investigate the effects of pilot interactions with adaptive flight control that can have implications of stability and performance.

Kinematic development of the Tibetan Plateau's northern margin: A traverse across the Qilian Shan-Nan Shan thrust belt

NASA Astrophysics Data System (ADS)

Zuza, A. V.; Levy, D. A.; Wang, Z.; Xiong, X.; Chen, X.

2017-12-01

The active Cenozoic Qilian Shan-Nan Shan thrust belt defines the northern margin of the Tibetan Plateau. The kinematic development of this thrust belt has implications models of plateau growth and Himalayan-Tibetan orogen strain accommodation. We present new field observations and analytical data from a traverse across the 350-km-wide doubly vergent Qilian Shan, which is bound by the south-dipping North Qilian thrust system in the north and the north-dipping range-bounding Qinghai Nanshan-Dulan Shan thrust system in the south. These faults, and several other major thrusts within the thrust-belt interior, disrupt relatively thick Oligocene-Miocene basin deposits. Of note, many of the thrust faults across the width of the Qilian Shan have Quaternary fault scarps, indicating that active deformation is distributed and not only concentrated along the northern frontal faults. By integrating our detailed structural traverse with new geophysical observations and thermochronology data across the northern plateau margin, we construct a kinematic model for the development of the Tibetan Plateau's northern margin. Deformation initiated in the Eocene-Oligocene along the north-dipping Qinghai Nanshan-Dulan Shan and south-dipping Tuolai Nan Shan thrusts, the latter of which then defined the northern boundary of the Tibetan Plateau. This early deformation was focused along preexisting early Paleozoic structures. A 200-km-wide basin formed between these ranges, and from the Miocene to present, new thrust- and strike-slip-fault-bounded ranges developed, including the north-directed North Qilian and the south-directed Tuolai Nan thrusts. Thus, our observations do not support northward propagating thrust-belt expansion. Instead, we envision that the initial thrust-belt development generated a wide Oligocene-Miocene north-plateau basin that was subsequently disintegrated by later Miocene to present thrusting and strike-slip faulting. Ultimately, the Qilian Shan-Nan Shan thrust belt differs from a typical orogenic thrust wedge, and active deformation is distributed across the range.

Basin-wide Millennial Cycles in Arabian Sea Climate Over the Last Glacial

NASA Astrophysics Data System (ADS)

Pourmand, A.; Marcantonio, F.

2005-05-01

High-frequency Dansgaard-Oeschger (D-O) and Heinrich cycles first discovered in the records of North Atlantic ice and marine sediments have been found to extend beyond the North Atlantic There is ample evidence for these millennial cycles of climate variability in the sediments of the Arabian Sea. We employ uranium-series radionuclide proxies to determine changes in the fluxes of sedimentary components in two cores from the western (W) and northeastern (NE) Arabian Sea in order to investigate fluctuations of export production and wind strength on a large regional scale during the last glacial period. In the NE Arabian Sea off of the Pakistani margin, 230Th-derived detrital (eolian) fluxes are highest during periods consistent with the timing of North Atlantic D-O stadial and H 1-7 events. Authigenic uranium concentrations, which we interpret as a proxy for primary productivity, also show an increase during North Atlantic D-O interstadials. Preliminary results from W Arabian Sea sediments off of the Oman margin corroborate that these millennial cycles in productivity and eolian fluxes are indeed basin-wide events. Authigenic U concentrations in these sediments are, on average, about twice those measured in the NE Arabian Sea, suggesting, qualitatively, an enhancement of primary productivity in the western part of the basin. In contrast, fluxes of eolian material to the Oman margin are, on average, more than 10 times lower than those delivered to the Pakistani margin, even though the patterns of millennial variability are virtually identical. We associate enhanced export production and a decreased eolian input during relatively warmer D-O interstadials with an intensification of southwest monsoonal winds. Similarly, decreased export production is coincident with an increase in eolian fluxes during North Atlantic stadial and H events. These results provide strong evidence for a basin-wide atmospheric teleconnection between Arabian Sea and North Atlantic climate on sub-Milankovitch timescales.

A hidden two-locus disease association pattern in genome-wide association studies

PubMed Central

2011-01-01

Background Recent association analyses in genome-wide association studies (GWAS) mainly focus on single-locus association tests (marginal tests) and two-locus interaction detections. These analysis methods have provided strong evidence of associations between genetics variances and complex diseases. However, there exists a type of association pattern, which often occurs within local regions in the genome and is unlikely to be detected by either marginal tests or interaction tests. This association pattern involves a group of correlated single-nucleotide polymorphisms (SNPs). The correlation among SNPs can lead to weak marginal effects and the interaction does not play a role in this association pattern. This phenomenon is due to the existence of unfaithfulness: the marginal effects of correlated SNPs do not express their significant joint effects faithfully due to the correlation cancelation. Results In this paper, we develop a computational method to detect this association pattern masked by unfaithfulness. We have applied our method to analyze seven data sets from the Wellcome Trust Case Control Consortium (WTCCC). The analysis for each data set takes about one week to finish the examination of all pairs of SNPs. Based on the empirical result of these real data, we show that this type of association masked by unfaithfulness widely exists in GWAS. Conclusions These newly identified associations enrich the discoveries of GWAS, which may provide new insights both in the analysis of tagSNPs and in the experiment design of GWAS. Since these associations may be easily missed by existing analysis tools, we can only connect some of them to publicly available findings from other association studies. As independent data set is limited at this moment, we also have difficulties to replicate these findings. More biological implications need further investigation. Availability The software is freely available at http://bioinformatics.ust.hk/hidden_pattern_finder.zip. PMID:21569557

The Parable of the Boiled Safety Professional

NASA Technical Reports Server (NTRS)

Shivers, Charles H.

2011-01-01

Common and unique issues contribute to system failures. This paper touches on the concept of drift to failure as a cautionary message. Managers and leaders, design team members, fabricators and assemblers, analysis and assurance personnel, and others associated with operating and maintaining systems, need to pay attention to identify the manifestation of individual and collective behaviors that might indicate slips in rigor or focus or decisions that might eat away at safety margins as our system drifts to failure. Corrections to drift made during design and development phases may efficiently prevent or mitigate drift problems occurring in the operational phase.

New research opportunities for roadside safety barriers improvement

NASA Astrophysics Data System (ADS)

Cantisani, Giuseppe; Di Mascio, Paola; Polidori, Carlo

2017-09-01

Among the major topics regarding the protection of roads, restraint systems still represent a big opportunity in order to increase safety performances. When accidents happen, in fact, the infrastructure can substantially contribute to the reduction of consequences if its marginal spaces are well designed and/or effective restraint systems are installed there. Nevertheless, basic concepts and technology of road safety barriers have not significantly changed for the last two decades. The paper proposes a new approach to the study aimed to define possible enhancements of restraint safety systems performances, by using new materials and defining innovative design principles. In particular, roadside systems can be developed with regard to vehicle-barrier interaction, vehicle-oriented design (included low-mass and extremely low-mass vehicles), traffic suitability, user protection, working width reduction. In addition, thanks to sensors embedded into the barriers, it is also expected to deal with new challenges related to the guidance of automatic vehicles and I2V communication.

Palatoplasty: suturing the mucoperiosteal flaps to the hard palate through hole.

PubMed

Hwang, Kun; Lee, Ji Hun; Kim, Yu Jin; Le, Se Il

2009-05-01

We satisfactorily repaired a wide cleft palate using a method of V-Y pushback and anchoring the oral mucoperiosteal flap onto the bony ridge of the cleft. An 8-year-old Vietnamese girl had a wide incomplete bilateral posterior cleft palate associated with congenital cardiac malformations. The gap of the posterior cleft was 2.5 cm, which exceeded the total widths of the palatal shelves. We applied V-Y pushback and used a vomer flap to close the wide cleft palate. The posterior two thirds of the nasal mucosae from the cleft margins were sutured to the vomer flap. The nasal side of the anterior one third of the bony cleft was uncovered. The elevated bilateral mucoperiosteal flaps were brought together to the midline and sutured to the anterior triangular flap in a V-Y pushback fashion. Four holes were drilled 5 mm lateral to each bony cleft margin. The lateral sides of the mucoperiosteal flaps were fixed to the palate bone with 3-0 Vicryl through the hole. This method reduces the tension of the flap which might frequently cause oronasal fistula and also improve viability.

Comparisons of Wilks’ and Monte Carlo Methods in Response to the 10CFR50.46(c) Proposed Rulemaking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Hongbin; Szilard, Ronaldo; Zou, Ling

The Nuclear Regulatory Commission (NRC) is proposing a new rulemaking on emergency core system/loss-of-coolant accident (LOCA) performance analysis. In the proposed rulemaking, designated as 10CFR50.46(c), the US NRC put forward an equivalent cladding oxidation criterion as a function of cladding pre-transient hydrogen content. The proposed rulemaking imposes more restrictive and burnup-dependent cladding embrittlement criteria; consequently nearly all the fuel rods in a reactor core need to be analyzed under LOCA conditions to demonstrate compliance to the safety limits. New analysis methods are required to provide a thorough characterization of the reactor core in order to identify the locations of themore » limiting rods as well as to quantify the safety margins under LOCA conditions. With the new analysis method presented in this work, the limiting transient case and the limiting rods can be easily identified to quantify the safety margins in response to the proposed new rulemaking. In this work, the best-estimate plus uncertainty (BEPU) analysis capability for large break LOCA with the new cladding embrittlement criteria using the RELAP5-3D code is established and demonstrated with a reduced set of uncertainty parameters. Both the direct Monte Carlo method and the Wilks’ nonparametric statistical method can be used to perform uncertainty quantification. Wilks’ method has become the de-facto industry standard to perform uncertainty quantification in BEPU LOCA analyses. Despite its widespread adoption by the industry, the use of small sample sizes to infer statement of compliance to the existing 10CFR50.46 rule, has been a major cause of unrealized operational margin in today’s BEPU methods. Moreover the debate on the proper interpretation of the Wilks’ theorem in the context of safety analyses is not fully resolved yet, even more than two decades after its introduction in the frame of safety analyses in the nuclear industry. This represents both a regulatory and application risk in rolling out new methods. With the 10CFR50.46(c) proposed rulemaking, the deficiencies of the Wilks’ approach are further exacerbated. The direct Monte Carlo approach offers a robust alternative to perform uncertainty quantification within the context of BEPU analyses. In this work, the Monte Carlo method is compared with the Wilks’ method in response to the NRC 10CFR50.46(c) proposed rulemaking.« less

RAVEN User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Rabiti, Cristian; Cogliati, Joshua Joseph

2015-10-01

RAVEN is a generic software framework to perform parametric and probabilistic analysis based on the response of complex system codes. The initial development was aimed to provide dynamic risk analysis capabilities to the Thermo-Hydraulic code RELAP-7, currently under development at the Idaho National Laboratory (INL). Although the initial goal has been fully accomplished, RAVEN is now a multi-purpose probabilistic and uncertainty quantification platform, capable to agnostically communicate with any system code. This agnosticism includes providing Application Programming Interfaces (APIs). These APIs are used to allow RAVEN to interact with any code as long as all the parameters that need tomore » be perturbed are accessible by inputs files or via python interfaces. RAVEN is capable of investigating the system response, and investigating the input space using Monte Carlo, Grid, or Latin Hyper Cube sampling schemes, but its strength is focused toward system feature discovery, such as limit surfaces, separating regions of the input space leading to system failure, using dynamic supervised learning techniques. The development of RAVEN has started in 2012, when, within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the need to provide a modern risk evaluation framework became stronger. RAVEN principal assignment is to provide the necessary software and algorithms in order to employ the concept developed by the Risk Informed Safety Margin Characterization (RISMC) program. RISMC is one of the pathways defined within the Light Water Reactor Sustainability (LWRS) program. In the RISMC approach, the goal is not just the individuation of the frequency of an event potentially leading to a system failure, but the closeness (or not) to key safety-related events. Hence, the approach is interested in identifying and increasing the safety margins related to those events. A safety margin is a numerical value quantifying the probability that a safety metric (e.g. for an important process such as peak pressure in a pipe) is exceeded under certain conditions. The initial development of RAVEN has been focused on providing dynamic risk assessment capability to RELAP-7, currently under development at the INL and, likely, future replacement of the RELAP5-3D code. Most the capabilities that have been implemented having RELAP-7 as principal focus are easily deployable for other system codes. For this reason, several side activaties are currently ongoing for coupling RAVEN with software such as RELAP5-3D, etc. The aim of this document is the explanation of the input requirements, focalizing on the input structure.« less

RAVEN User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Rabiti, Cristian; Cogliati, Joshua Joseph

2016-02-01

RAVEN is a generic software framework to perform parametric and probabilistic analysis based on the response of complex system codes. The initial development was aimed to provide dynamic risk analysis capabilities to the Thermo-Hydraulic code RELAP-7, currently under development at the Idaho National Laboratory (INL). Although the initial goal has been fully accomplished, RAVEN is now a multi-purpose probabilistic and uncertainty quantification platform, capable to agnostically communicate with any system code. This agnosticism includes providing Application Programming Interfaces (APIs). These APIs are used to allow RAVEN to interact with any code as long as all the parameters that need tomore » be perturbed are accessible by input files or via python interfaces. RAVEN is capable of investigating the system response, and investigating the input space using Monte Carlo, Grid, or Latin Hyper Cube sampling schemes, but its strength is focused toward system feature discovery, such as limit surfaces, separating regions of the input space leading to system failure, using dynamic supervised learning techniques. The development of RAVEN started in 2012, when, within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the need to provide a modern risk evaluation framework became stronger. RAVEN principal assignment is to provide the necessary software and algorithms in order to employ the concept developed by the Risk Informed Safety Margin Characterization (RISMC) program. RISMC is one of the pathways defined within the Light Water Reactor Sustainability (LWRS) program. In the RISMC approach, the goal is not just the individuation of the frequency of an event potentially leading to a system failure, but the closeness (or not) to key safety-related events. Hence, the approach is interested in identifying and increasing the safety margins related to those events. A safety margin is a numerical value quantifying the probability that a safety metric (e.g. for an important process such as peak pressure in a pipe) is exceeded under certain conditions. The initial development of RAVEN has been focused on providing dynamic risk assessment capability to RELAP-7, currently under development at the INL and, likely, future replacement of the RELAP5-3D code. Most the capabilities that have been implemented having RELAP-7 as principal focus are easily deployable for other system codes. For this reason, several side activates are currently ongoing for coupling RAVEN with software such as RELAP5-3D, etc. The aim of this document is the explanation of the input requirements, focusing on the input structure.« less

RAVEN User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Rabiti, Cristian; Cogliati, Joshua Joseph

2017-03-01

RAVEN is a generic software framework to perform parametric and probabilistic analy- sis based on the response of complex system codes. The initial development was aimed to provide dynamic risk analysis capabilities to the Thermo-Hydraulic code RELAP-7, currently under development at the Idaho National Laboratory (INL). Although the initial goal has been fully accomplished, RAVEN is now a multi-purpose probabilistic and uncer- tainty quantification platform, capable to agnostically communicate with any system code. This agnosticism includes providing Application Programming Interfaces (APIs). These APIs are used to allow RAVEN to interact with any code as long as all the parameters thatmore » need to be perturbed are accessible by inputs files or via python interfaces. RAVEN is capable of investigating the system response, and investigating the input space using Monte Carlo, Grid, or Latin Hyper Cube sampling schemes, but its strength is focused to- ward system feature discovery, such as limit surfaces, separating regions of the input space leading to system failure, using dynamic supervised learning techniques. The development of RAVEN has started in 2012, when, within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the need to provide a modern risk evaluation framework became stronger. RAVEN principal assignment is to provide the necessary software and algorithms in order to employ the concept developed by the Risk Informed Safety Margin Characterization (RISMC) program. RISMC is one of the pathways defined within the Light Water Reactor Sustainability (LWRS) program. In the RISMC approach, the goal is not just the individuation of the frequency of an event potentially leading to a system failure, but the closeness (or not) to key safety-related events. Hence, the approach is in- terested in identifying and increasing the safety margins related to those events. A safety margin is a numerical value quantifying the probability that a safety metric (e.g. for an important process such as peak pressure in a pipe) is exceeded under certain conditions. The initial development of RAVEN has been focused on providing dynamic risk assess- ment capability to RELAP-7, currently under develop-ment at the INL and, likely, future replacement of the RELAP5-3D code. Most the capabilities that have been implemented having RELAP-7 as principal focus are easily deployable for other system codes. For this reason, several side activates are currently ongoing for coupling RAVEN with soft- ware such as RELAP5-3D, etc. The aim of this document is the explaination of the input requirements, focalizing on the input structure.« less

Operational effects & safety hazards involved in transporting 14-foot wide loads in Virginia.

DOT National Transportation Integrated Search

1976-01-01

Since the early 1950's, highways have been designed in Virginia to carry 8-foot wide vehicles on 12-foot lanes. Extralegal width vehicles impose detrimental operational effects and safety hazards on other highway users. To minimize the hazards, the H...

What makes up marginal lands and how can it be defined and classified?

NASA Astrophysics Data System (ADS)

Ivanina, Vadym

2017-04-01

Definitions of marginal lands are often not explicit. The term "marginal" is not supported by either a precise definition or research to determine which lands fall into this category. To identify marginal lands terminology/methodology is used which varies between physical characteristics and the current land use of a site as basic perspective. The term 'Marginal' is most commonly followed by 'degraded' lands, and other widely used terms such as 'abandoned', 'idle', 'pasture', 'surplus agricultural land', 'Conservation Reserve Programme' (CRP)', 'barren and carbon-poor land', etc. Some terms are used synonymously. To the category of "marginal" lands are predominantly included lands which are excluded from cultivation due to economic infeasibility or physical restriction for growing conventional crops. Such sites may still have potential to be used for alternative agricultural practice, e.g. bioenergy feedstock production. The existing categorizing of marginal lands does not allow evaluating soil fertility potential or to define type and level of constrains for growing crops as the reason of a low practical value with regards to land use planning. A new marginal land classification has to be established and developed. This classification should be built on criteria of soil biophysical properties, ecologic, environment and climate handicaps for growing crops, be easy in use and of high practical value. The SEEMLA consortium made steps to build such a marginal land classification which is based on direct criteria depicting soil properties and constrains, and defining their productivity potential. By this classification marginal lands are divided into eleven categories: shallow rooting, low fertility, stony texture, sandy texture, clay texture, salinic, sodicic, acidic, overwet, eroded, and contaminated. The basis of this classification was taken criteria modified after and adapted from Regulation EU (1305)2013. To define an area of marginal lands with climate and economic limitations, SEEMLA established and implemented the term "area of land marginality" with a broader on marginal lands. This term includes marginal lands themselves, evaluation of climate constrains and economic efficiency to grow crops. This approach allows to define, categorize and classify marginal land by direct indicators of soil biophysical properties, ecologic and environment constrains, and provides additional evaluation of lands marginality with regards to suitability for growing crops based on climate criteria.

Identifying behaviour patterns of construction safety using system archetypes.

PubMed

Guo, Brian H W; Yiu, Tak Wing; González, Vicente A

2015-07-01

Construction safety management involves complex issues (e.g., different trades, multi-organizational project structure, constantly changing work environment, and transient workforce). Systems thinking is widely considered as an effective approach to understanding and managing the complexity. This paper aims to better understand dynamic complexity of construction safety management by exploring archetypes of construction safety. To achieve this, this paper adopted the ground theory method (GTM) and 22 interviews were conducted with participants in various positions (government safety inspector, client, health and safety manager, safety consultant, safety auditor, and safety researcher). Eight archetypes were emerged from the collected data: (1) safety regulations, (2) incentive programs, (3) procurement and safety, (4) safety management in small businesses (5) production and safety, (6) workers' conflicting goals, (7) blame on workers, and (8) reactive and proactive learning. These archetypes capture the interactions between a wide range of factors within various hierarchical levels and subsystems. As a free-standing tool, they advance the understanding of dynamic complexity of construction safety management and provide systemic insights into dealing with the complexity. They also can facilitate system dynamics modelling of construction safety process. Copyright © 2015 Elsevier Ltd. All rights reserved.

Flooding Capability for River-based Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L.; Prescott, Steven; Ryan, Emerald

2015-10-01

This report describes the initial investigation into modeling and simulation tools for application of riverine flooding representation as part of the Risk-Informed Safety Margin Characterization (RISMC) Pathway external hazards evaluations. The report provides examples of different flooding conditions and scenarios that could impact river and watershed systems. Both 2D and 3D modeling approaches are described.

The Violence Continuum: Creating a Safe School Climate

ERIC Educational Resources Information Center

Manvell, Elizabeth C.

2012-01-01

We expect schools to be a safe haven, but after more than a decade of targeted school violence prevention laws and safety plans, students are still marginalized and bullied to the point of despondence, retaliation, and even suicide. This thoughtful exploration of what makes a school a safe place is based on the understanding that violence is a…

Moving from the Margins: Culturally Safe Teacher Education in Remote Northwestern British Columbia

ERIC Educational Resources Information Center

Harrison, Edward B.; Lautensach, Alexander K.; McDonald, Verna Lynn

2012-01-01

In 2007 the University of Northern British Columbia initiated a two-year elementary teacher education program at the Northwest Campus in Terrace, British Columbia. The program was designed to meet specific community needs in the North that arise from inequities in the cultural safety of Indigenous teachers and students. The authors share three…

Planning, evaluation and analytical studies in planetary quarantine and spacecraft sterilization

NASA Technical Reports Server (NTRS)

1972-01-01

The technical and analytical support used to aid in developing requirements for planetary quarantine are presented. The investigation was divided into 8 work tasks which are presented in tabular form. Data include methods of sterilization, safety margins for quarantine, revision of contamination logs for Mars and Venus, and estimates of encapsulated and 'free' microbial burden.

Stress analysis of 27% scale model of AH-64 main rotor hub

NASA Technical Reports Server (NTRS)

Hodges, R. V.

1985-01-01

Stress analysis of an AH-64 27% scale model rotor hub was performed. Component loads and stresses were calculated based upon blade root loads and motions. The static and fatigue analysis indicates positive margins of safety in all components checked. Using the format developed here, the hub can be stress checked for future application.

The challenging scales of the bird: Shuttle tile structural integrity

NASA Technical Reports Server (NTRS)

Schneider, W. C.; Miller, G. J.

1985-01-01

The principal design issues, tests, and analyses required to solve the tile integrity problem on the space shuttle orbiters are addressed. Proof testing of installed tiles is discussed along with an airflow test of special tiles. Orbiter windshield tiles are considered in terms of changes necessary to ensure acceptable margins of safety for flight.

Protect Children Instead of Guns, 2000.

ERIC Educational Resources Information Center

Children's Defense Fund, Washington, DC.

Noting that firearms outnumber children by a margin of almost three to one in the United States, this report advocates gun safety policies to protect children. The report provides information on trends in youth firearm deaths from 1994 and 1999 and comparisons of U.S. data to those of other industrialized countries. A table delineates 1996-1998…

Toxicology: Bee P450s Take the Sting out of Cyanoamidine Neonicotinoids.

PubMed

Feyereisen, René

2018-05-07

The neonicotinoid insecticides have raised concerns regarding the health of bee pollinators. New research has identified a P450 enzyme that protects honey bees and bumble bees from the toxicity of two neonicotinoids, thiacloprid and acetamiprid. This P450 enzyme provides a margin of safety to bees. Copyright © 2018 Elsevier Ltd. All rights reserved.

Aviation Weather for Pilots and Flight Operations Personnel.

ERIC Educational Resources Information Center

National Oceanic and Atmospheric Administration (DOC), Rockville, MD. National Weather Service.

The revised Aviation Weather book discusses each aspect of weather as it relates to aircraft operations and flight safety. The book is not an aircraft operating manual and omits all reference to specific weather services. Much of the book has been devoted to marginal, hazardous, and violent weather. It teaches pilots to learn to appreciate good…

Am I Safe Here? LGBTQ Teens and Bullying in Schools

ERIC Educational Resources Information Center

Short, Donn

2017-01-01

"Am I safe here?" LGBTQ students ask this question every day within the school system. This book shines a light on the marginalization and bullying faced by LGBTQ youth, offering a new conceptualization of school safety. Donn Short treats students as the experts on what happens in their schools, giving them a chance to speak for…

Seismic evidence for widespread serpentinized forearc upper mantle along the Cascadia margin

USGS Publications Warehouse

Brocher, T.M.; Parsons, T.; Trehu, A.M.; Snelson, C.M.; Fisher, M.A.

2003-01-01

Petrologic models suggest that dehydration and metamorphism of subducting slabs release water that serpentinizes the overlying forearc mantle. To test these models, we use the results of controlled-source seismic surveys and earthquake tomography to map the upper mantle along the Cascadia margin forearc. We find anomalously low upper-mantle velocities and/or weak wide-angle reflections from the top of the upper mantle in a narrow region along the margin, compatible with recent teleseismic studies and indicative of a serpentinized upper mantle. The existence of a hydrated forearc upper-mantle wedge in Cascadia has important geological and geophysical implications. For example, shearing within the upper mantle, inferred from seismic reflectivity and consistent with its serpentinite rheology, may occur during aseismic slow slip events on the megathrust. In addition, progressive dehydration of the hydrated mantle wedge south of the Mendocino triple junction may enhance the effects of a slap gap during the evolution of the California margin.

Origin and tectonic evolution of early Paleozoic arc terranes abutting the northern margin of North China Craton

NASA Astrophysics Data System (ADS)

Zhou, Hao; Pei, Fu-Ping; Zhang, Ying; Zhou, Zhong-Biao; Xu, Wen-Liang; Wang, Zhi-Wei; Cao, Hua-Hua; Yang, Chuan

2017-12-01

The origin and tectonic evolution of the early Paleozoic arc terranes abutting the northern margin of the North China Craton (NCC) are widely debated. This paper presents detrital zircon U-Pb and Hf isotopic data of early Paleozoic strata in the Zhangjiatun arc terrane of central Jilin Province, northeast (NE) China, and compares them with the Bainaimiao and Jiangyu arc terranes abutting the northern margin of the NCC. Detrital zircons from early Paleozoic strata in three arc terranes exhibit comparable age groupings of 539-430, 1250-577, and 2800-1600 Ma. The Paleoproterozoic to Neoarchean ages and Hf isotopic composition of the detrital zircons imply the existence of the Precambrian fragments beneath the arc terranes. Given the evidences from geology, igneous rocks, and detrital zircons, we proposed that the early Paleozoic arc terranes abutting the northern margin of the NCC are a united arc terrane including the exotic Precambrian fragments, and these fragments shared a common evolutionary history from Neoproterozoic to early-middle Paleozoic.

Wide versus narrow excision margins for high-risk, primary cutaneous melanomas: long-term follow-up of survival in a randomised trial.

PubMed

Hayes, Andrew J; Maynard, Lauren; Coombes, Gillian; Newton-Bishop, Julia; Timmons, Michael; Cook, Martin; Theaker, Jeffrey; Bliss, Judith M; Thomas, J Meirion

2016-02-01

The necessary margin of excision for cutaneous melanomas greater than 2 mm in thickness is controversial. At a median follow-up of 5 years, findings from our previously published randomised trial of narrow (1 cm) versus wide (3 cm) excision margins in patients with thick cutaneous melanomas showed that narrow margins were associated with an increased frequency of locoregional relapse, but no significant difference in overall survival was apparent. We now report a long-term survival analysis of that trial. We did a randomised, open-label multicentre trial in 59 hospitals--57 in the UK, one in Poland, and one in South Africa. Patients with one primary localised cutaneous melanoma greater than 2 mm in Breslow thickness on the trunk or limbs (excluding palms or soles) were randomly assigned (1:1) centrally to receive surgery with either a 1 cm or 3 cm excision margin following an initial surgery. The randomisation lists were generated with random permuted blocks and stratified by centre and extent of initial surgery. The endpoints of this analysis were overall survival and melanoma-specific survival. Analyses were done in the intention-to-treat population. This trial was not registered because it predated mandatory trial registration. Between Dec 16, 1992, and May 22, 2001, we randomly assigned 900 patients to surgery with either a 1 cm excision margin (n=453) or a 3 cm excision margin (n=447). At a median follow-up of 8·8 years (106 months [IQR 76-135], 494 patients had died, with 359 of these deaths attributed to melanoma. 194 deaths were attributed to melanoma in the 1 cm group compared with 165 in the 3 cm group (unadjusted hazard ratio [HR] 1·24 [95% CI 1·01-1·53]; p=0·041). Although a higher number of deaths overall occurred in the 1 cm group compared with the 3 cm group (253 vs 241), the difference was not significant (unadjusted HR 1·14 [95% CI 0·96-1·36]; p=0·14). Surgical complications were reported in 35 (8%) patients in the 1 cm excision margin group and 65 (15%) patients in the 3 cm group. Our findings suggest that a 1 cm excision margin is inadequate for cutaneous melanoma with Breslow thickness greater than 2 mm on the trunk and limbs. Current guidelines advise a 2 cm margin for melanomas greater than 2 mm in thickness but only a 1 cm margin for thinner melanomas. The adequacy of a 1 cm margin for thinner melanomas with poor prognostic features should be addressed in future randomised studies. Cancer Research UK, North Thames National Health Service Executive, Northern and Yorkshire National Health Service Executive, British United Provident Association Foundation, British Association of Plastic Surgeons, the Meirion Thomas Cancer Research Fund, and the National Institute for Health and Research Biomedical Research Centre at The Royal Marsden NHS Foundation Trust. Copyright © 2016 Hayes et al. Open Access article distributed under the terms of CC BY. Published by Elsevier Ltd.. All rights reserved.

Accelerated development and flight evaluation of active controls concepts for subsonic transport aircraft. Volume 2: AFT C.G. simulation and analysis

NASA Technical Reports Server (NTRS)

Urie, D. M.

1979-01-01

Relaxed static stability and stability augmentation with active controls were investigated for subsonic transport aircraft. Analytical and simulator evaluations were done using a contemporary wide body transport as a baseline. Criteria for augmentation system performance and unaugmented flying qualities were evaluated. Augmentation control laws were defined based on selected frequency response and time history criteria. Flying qualities evaluations were conducted by pilots using a moving base simulator with a transport cab. Static margin and air turbulence intensity were varied in test with and without augmentation. Suitability of a simple pitch control law was verified at neutral static margin in cruise and landing flight tasks. Neutral stability was found to be marginally acceptable in heavy turbulence in both cruise and landing conditions.

The emplacement of long lava flows in Mare Imbrium, the Moon

NASA Astrophysics Data System (ADS)

Garry, W. B.

2012-12-01

Lava flow margins are scarce on the lunar surface. The best developed lava flows on the Moon occur in Mare Imbrium where flow margins are traceable nearly their entire flow length. The flow field originates in the southwest part of the basin from a fissure or series of fissures and cones located in the vicinity of Euler crater and erupted in three phases (Phases I, II, III) over a period of 0.5 Billion years (3.0 - 2.5 Ga). The flow field was originally mapped with Apollo and Lunar Orbiter data by Schaber (1973) and shows the flow field extends 200 to 1200 km from the presumed source area and covers an area of 2.0 x 10^5 km^2 with an estimated eruptive volume of 4 x 10^4 km^3. Phase I flows extend 1200 km and have the largest flow volume, but interestingly do not exhibit visible topography and are instead defined by difference in color from the surrounding mare flows. Phases II and III flows have well-defined flow margins (10 - 65 m thick) and channels (0.4 - 2.0 km wide, 40 - 70 m deep), but shorter flow lengths, 600 km and 400 km respectively. Recent missions, including Lunar Reconnaissance Orbiter (LRO), Kaguya (Selene), and Clementine, provide high resolution data sets of these lava flows. Using a combination of data sets including images from LRO Wide-Angle-Camera (WAC)(50-100 m/pixel) and Narrow-Angle-Camera (NAC) (up to 0.5m/pixel), Kaguya Terrain Camera (TC) (10 m/pixel), and topography from LRO Lunar Orbiter Laser Altimeter (LOLA), the morphology has been remapped and topographic measurements of the flow features have been made in an effort to reevaluate the emplacement of the flow field. Morphologic mapping reveals a different flow path for Phase I compared to the original mapping completed by Schaber (1973). The boundaries of the Phase I flow field have been revised based on Moon Mineralogy Mapper color ratio images (Staid et al., 2011). This has implications for the area covered and volume erupted during this stage, as well as, the age of Phase I. Flow features and margins have been identified in the Phase I flow within the LROC WAC mosaic and in Narrow Angle Camera (NAC) images. These areas have a mottled appearance. LOLA profiles over the more prominent flow lobes in Phase I reveal these margins are less 10 m thick. Phase II and III morphology maps are similar to previous flow maps. Phase III lobes near Euler are 10-12 km wide and 20-30 m thick based on measurements of the LOLA 1024ppd Elevation Digital Terrain Model (DTM) in JMoon. One of the longer Phase III lobes varies between 15 to 50 km wide and 25 to 60 m thick, with the thickest section at the distal end of the lobe. The Phase II lobe is 15 to 25 m thick and up to 35 km wide. The eruptive volume of the Mare Imbrium lava flows has been compared to terrestrial flood basalts. The morphology of the lobes in Phase II and III, which includes levees, thick flow fronts, and lobate margins suggests these could be similar to terrestrial aa-style flows. The Phase I flows might be more representative of sheet flows, pahoehoe-style flows, or inflated flows. Morphologic comparisons will be made with terrestrial flows at Askja volcano in Iceland, a potential analog to compare different styles of emplacement for the flows in Mare Imbrium.

Safety-I, Safety-II and Resilience Engineering.

PubMed

Patterson, Mary; Deutsch, Ellen S

2015-12-01

In the quest to continually improve the health care delivered to patients, it is important to understand "what went wrong," also known as Safety-I, when there are undesired outcomes, but it is also important to understand, and optimize "what went right," also known as Safety-II. The difference between Safety-I and Safety-II are philosophical as well as pragmatic. Improving health care delivery involves understanding that health care delivery is a complex adaptive system; components of that system impact, and are impacted by, the actions of other components of the system. Challenges to optimal care include regular, irregular and unexampled threats. This article addresses the dangers of brittleness and miscalibration, as well as the value of adaptive capacity and margin. These qualities can, respectively, detract from or contribute to the emergence of organizational resilience. Resilience is characterized by the ability to monitor, react, anticipate, and learn. Finally, this article celebrates the importance of humans, who make use of system capabilities and proactively mitigate the effects of system limitations to contribute to successful outcomes. Copyright © 2015 Mosby, Inc. All rights reserved.

78 FR 8119 - Cancellation of the Notice of Intent To Prepare a Draft and Final Supplemental Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-05

... the Herbert Hoover Dike Major Rehabilitation Project, Martin and Palm Beach Counties AGENCY...-wide risk reduction approach as required for safety modifications to dams. FOR FURTHER INFORMATION...-2108. SUPPLEMENTARY INFORMATION: The supplemental MRR will be replaced with a system-wide Dam Safety...

High resolution 2D numerical models from rift to break-up: Crustal hyper-extension, Margin asymmetry, Sequential faulting

NASA Astrophysics Data System (ADS)

Brune, Sascha; Heine, Christian; Pérez-Gussinyé, Marta; Sobolev, Stephan

2013-04-01

Numerical modelling is a powerful tool to integrate a multitude of geological and geophysical data while addressing fundamental questions of passive margin formation such as the occurrence of crustal hyper-extension, (a-)symmetries between conjugate margin pairs, and the sometimes significant structural differences between adjacent margin segments. This study utilises knowledge gathered from two key examples of non-magmatic, asymmetric, conjugate margin pairs, i.e. Iberia-New Foundland and Southern Africa-Brazil, where many published seismic lines provide solid knowledge on individual margin geometry. While both margins involve crustal hyper-extension, it is much more pronounced in the South Atlantic. We investigate the evolution of these two margin pairs by carefully constraining our models with detailed plate kinematic history, laboratory-based rheology, and melt fraction evaluation of mantle upwelling. Our experiments are consistent with observed fault patterns, crustal thickness, and basin stratigraphy. We conduct 2D thermomechanical rift models using the finite element code SLIM3D that operates with nonlinear stress- and temperature-dependent elasto-visco-plastic rheology, with parameters provided by laboratory experiments on major crustal and upper mantle rocks. In our models we also calculate the melt fraction within the upwelling asthenosphere, which allows us to control whether the model indeed corresponds to the non-magmatic margin type or not. Our modelling highlights two processes as fundamental for the formation of hyper-extension and margin asymmetry at non-magmatic margins: (1) Strain hardening in the rift center due to cooling of upwelling mantle material (2) The formation of a weak crustal domain adjacent to the rift center caused by localized viscous strain softening and heat transfer from the mantle. Simultaneous activity of both processes promotes lateral rift migration in a continuous way that generates a wide layer of hyper-extended crust on one side of the rift basin. This mechanism implies that syn-rift deformation at the distal margin postdates faulting at the proximal margin by several million years. The succession of events holds intriguing implications not only for peak heat flow migration but also for processes like serpentinization and magmatic underplating.

Morphology and deformational history of Tellus Regio, Venus: Evidence for assembly and collision

NASA Astrophysics Data System (ADS)

Gilmore, M. S.; Head, J. W.

2018-05-01

Tessera terrain is the oldest stratigraphic unit on Venus, but its origin and evolution are inadequately understood. Here we have performed detailed mapping of Tellus Regio, the third largest tessera plateau on Venus. Tellus Regio is shown to have distinct marginal and interior facies. The east and west margins of Tellus rise up to 2 km above the interior and include ridges and troughs ∼5-20 km across, oriented parallel to the present plains-tessera boundary. Structures characteristic of the interior of Tellus are found within the eastern and western margins and are deformed by the margin-parallel ridges indicating their presence during the time of the formation of the current margins. These relationships suggest that the margins formed by the application of external horizontal compressional stresses at the edges of an already-existing tessera interior. Structural and stratigraphic relationships in southwest Tellus show the assembly of three structurally distinct tessera regions and intervening plains that are consistent with the collision of the southwest margin into the plateau interior. This requires that tessera terrain was formed regionally and collected into the present day Tellus plateau. The latest stages of activity in Tellus include volcanism and pervasive, distributed, 1-2 km wide graben, which may have been formed due to large-scale gravitational relaxation of the plateau topography. A large intratessera plains unit may have formed via crustal delamination. The collisional oroclinal deformation of the margins are most consistent with models that invoke mantle downwelling for the origin of Tellus Regio and other tessera plateaus with similar structural relationships.

77 FR 72817 - Glycine From the People's Republic of China: Preliminary Results of Antidumping Duty...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-06

... covers one exporter of subject merchandise, Baoding Mantong Fine Chemistry Co. Ltd. (Baoding Mantong). We...: Dumping Exporter margin (percent) PRC-wide entity (including Baoding Mantong Fine Chemistry 453.79 Co...

Image of the Moho across the continent-ocean transition, US east coast

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holbrook, W.S.; Purdy, G.M.; Reiter, E.C.

1992-03-01

Strong wide-angle reflections from the Moho were recorded by ocean-bottom seismic instruments during the 1988 Carolina Trough multichannel seismic experiment, in an area where the Moho is difficult to detect with vertical-incidence seismic data. Prestack depth migration of these reflections has enabled the construction of a seismic image of the Moho across the continent-ocean transition of a sedimented passive margin. The Moho rises across the margin at a slope of 10{degree}-12{degree}, from a depth of about 33 km beneath the continental shelf to 20 km beneath the outer rise. This zone of crustal thinning defines a distinct, 60-70-km-wide continent-ocean transitionmore » zone. The authors interpret the Moho in the Carolina Trough as a Jurassic feature, formed by magmatic intrusion and underplating during the rifting of Pangea.« less

Does the width of the surgical margin of safety or premalignant dermatoses at the negative surgical margin affect outcome in surgically treated penile cancer?

PubMed

Gunia, Sven; Koch, Stefan; Jain, Anjun; May, Matthias

2014-03-01

To evaluate the prognostic impact of the width of negative surgical margins (NSM) and associated and preinvasive lesions at the NSM in patients with penile squamous cell cancer (PSC). Enrolling 87 patients with NSM who underwent surgery for PSC, the archived margin slides and entirely wax-embedded surgical margins were retrieved from the pathology files. After step sections were cut, margins were stained with antibodies against CK5/6, p16, p53 and Ki-67 and subjected to in situ hybridisation for high-risk human papillomavirus (HPV). All NSM were histologically examined for squamous hyperplasia (SH), lichen sclerosus (LS) and subtypes of penile intraepithelial neoplasia (PeIN). Then, histological findings were correlated with cancer-specific mortality (CSM, median follow-up 34 months; IQR 6-70). All NSM were negative for high-risk HPV and exhibited SH (p16 and p53 negative, Ki-67 variably positive), LS (p16 negative, variable p53 and Ki-67 positivity) and differentiated PeIN (dPeIN; p16 negative, Ki-67 positive, variable p53 positivity) in 28 (32%), 30 (34%) and 22 (25%) cases, respectively, whereas PeIN subtypes other then dPeIN did not occur. Pathological tumour stage was the only independent predictive parameter with respect to CSM in the multivariable analysis (p=0.001). SH, LS and dPeIN are frequent histological findings at the NSM of surgically treated PSC. However, neither the width of the NSM nor dPeIN, LS or SH at the NSM influences prognostic outcome.

Variations in magmatic processes along the East Greenland volcanic margin

NASA Astrophysics Data System (ADS)

Voss, Max; Schmidt-Aursch, Mechita C.; Jokat, Wilfried

2009-05-01

Seismic velocities and the associated thicknesses of rifted and igneous crust provide key constraints on the rifting history, the differentiation between non-volcanic and volcanic rifted margins, the driving force of magmatism at volcanic margins, that is, active or passive upwelling and the temperature anomaly in the lithosphere. This paper presents two new wide-angle seismic transects of the East Greenland margin and combines the velocity models with a compilation of 30-wide-angle seismic velocity models from several publications along the entire East Greenland margin. Compiled maps show the depth to basement, depth to Moho, crustal thickness and thickness of high velocity lower crust (HVLC; with velocities above 7.0 km s-1). First, we present two new wide-angle seismic transects, which contribute to the compilation at the northeast Greenland margin and over the oceanic crust between Shannon Island and the Greenland Fracture Zone. Velocity models, produced by ray tracing result in total traveltime rms-misfits of 100-120 milliseconds and χ2 values of 3.7 and 2.3 for the northern and southern profiles with respect to the data quality and structural complexity. 2-D gravity modelling is used to verify the structural and lithologic constraints. The northernmost profile, AWI-20030200, reveals a magma starved break-up and a rapidly thinning oceanic crust until magnetic anomaly C21 (47.1 Ma). The southern seismic transect, AWI-20030300, exhibits a positive velocity anomaly associated with the Shannon High, and a basin of up to 15 km depth beneath flood basalts between Shannon Island and the continent-ocean boundary. Break-up is associated with minor crustal thickening and a rapidly decreasing thickness of oceanic crust out to anomaly C21. The continental region is proposed to be only sparsely penetrated by volcanism and not underplated by magmatic material at all compared to the vast amount of magmatism further south. Break-up is proposed to have occurred at the seaward boundaries of the continent-ocean transition zones at between ~50 and ~54 Ma, propagating from north to south based on a joint analysis incorporating transects from the Kejser Franz Joseph Fjord and Godthåb Gulf. Secondly, the variation of the HVLC along the East Greenland margin from 60° to 77°N and from transects of its conjugate margin shows inverted emplacement of prominent landward and seaward HVLC thickness portions from north to south in a distribution chart. The differences in the HVLC distribution are attributed to one or more of the following three models. In the first model it is inferred that a transfer zone/detachment acts as a barrier to northward magma flow. In the second model, underplating results in thicker and highly intruded lower crust with several small-scale feeder dykes that locally increase the lower crustal velocities. In the third model, a second magmatic event associated with the separation of the Jan Mayen microcontinent is considered. Lithospheric-scale inhomogeneities might be responsible for the heterogeneous melt generation, the inversion of the HVLC distribution in continental and oceanic domains and differences in its velocities.

An unrecognized major collision of the Okhotomorsk Block with East Asia during the Late Cretaceous, constraints on the plate reorganization of the Northwest Pacific

NASA Astrophysics Data System (ADS)

Yang, Yong-Tai

2013-11-01

Interactions at plate boundaries induce stresses that constitute critical controls on the structural evolution of intraplate regions. However, the traditional tectonic model for the East Asian margin during the Mesozoic, invoking successive episodes of paleo-Pacific oceanic subduction, does not provide an adequate context for important Late Cretaceous dynamics across East Asia, including: continental-scale orogenic processes, significant sinistral strike-slip faulting, and several others. The integration of numerous documented field relations requires a new tectonic model, as proposed here. The Okhotomorsk continental block, currently residing below the Okhotsk Sea in Northeast Asia, was located in the interior of the Izanagi Plate before the Late Cretaceous. It moved northwestward with the Izanagi Plate and collided with the South China Block at about 100 Ma. The indentation of the Okhotomorsk Block within East Asia resulted in the formation of a sinistral strike-slip fault system in South China, formation of a dextral strike-slip fault system in North China, and regional northwest-southeast shortening and orogenic uplift in East Asia. Northeast-striking mountain belts over 500 km wide extended from Southeast China to Southwest Japan and South Korea. The peak metamorphism at about 89 Ma of the Sanbagawa high-pressure metamorphic belt in Southwest Japan was probably related to the continental subduction of the Okhotomorsk Block beneath the East Asian margin. Subsequently, the north-northwestward change of motion direction of the Izanagi Plate led to the northward movement of the Okhotomorsk Block along the East Asian margin, forming a significant sinistral continental transform boundary similar to the San Andreas fault system in California. Sanbagawa metamorphic rocks in Southwest Japan were rapidly exhumed through the several-kilometer wide ductile shear zone at the lower crust and upper mantle level. Accretionary complexes successively accumulated along the East Asian margin during the Jurassic-Early Cretaceous were subdivided into narrow and subparallel belts by the upper crustal strike-slip fault system. The departure of the Okhotomorsk Block from the northeast-striking Asian margin resulted in the occurrence of an extensional setting and formation of a wide magmatic belt to the west of the margin. In the Campanian, the block collided with the Siberian margin, in Northeast Asia. At about 77 Ma, a new oceanic subduction occurred to the south of the Okhotomorsk Block, ending its long-distance northward motion. Based on the new tectonic model, the abundant Late Archean to Early Proterozoic detrital zircons in the Cretaceous sandstones in Kamchatka, Southwest Japan, and Taiwan are interpreted to have been sourced from the Okhotomorsk Block basement which possibly formed during the Late Archean and Early Proterozoic. The new model suggests a rapidly northward-moving Okhotomorsk Block at an average speed of 22.5 cm/yr during 89-77 Ma. It is hypothesized that the Okhotomorsk-East Asia collision during 100-89 Ma slowed down the northwestward motion of the Izanagi Plate, while slab pull forces produced from the subducting Izanagi Plate beneath the Siberian margin redirected the plate from northwestward to north-northwestward motion at about 90-89 Ma.

Analysis of Aviation Safety Reporting System Incident Data Associated with the Technical Challenges of the System-Wide Safety and Assurance Technologies Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2015-01-01

The Aviation Safety Program (AvSP) System-Wide Safety and Assurance Technologies (SSAT) Project asked the AvSP Systems and Portfolio Analysis Team to identify SSAT-related trends. SSAT had four technical challenges: advance safety assurance to enable deployment of NextGen systems; automated discovery of precursors to aviation safety incidents; increasing safety of human-automation interaction by incorporating human performance, and prognostic algorithm design for safety assurance. This report reviews incident data from the NASA Aviation Safety Reporting System (ASRS) for system-component-failure- or-malfunction- (SCFM-) related and human-factor-related incidents for commercial or cargo air carriers (Part 121), commuter airlines (Part 135), and general aviation (Part 91). The data was analyzed by Federal Aviation Regulations (FAR) part, phase of flight, SCFM category, human factor category, and a variety of anomalies and results. There were 38 894 SCFM-related incidents and 83 478 human-factorrelated incidents analyzed between January 1993 and April 2011.

Correlation between safety climate and contractor safety assessment programs in construction.

PubMed

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

76 FR 5494 - Pipeline Safety: Mechanical Fitting Failure Reporting Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Safety: Mechanical Fitting Failure Reporting Requirements AGENCY: Pipeline and Hazardous Materials Safety... tightening. A widely accepted industry guidance document, Gas Pipeline Technical Committee (GPTC) Guide, does...

Fragility Analysis of Concrete Gravity Dams

NASA Astrophysics Data System (ADS)

Tekie, Paulos B.; Ellingwood, Bruce R.

2002-09-01

Concrete gravity dams are an important part ofthe nation's infrastructure. Many dams have been in service for over 50 years, during which time important advances in the methodologies for evaluation of natural phenomena hazards have caused the design-basis events to be revised upwards, in some cases significantly. Many existing dams fail to meet these revised safety criteria and structural rehabilitation to meet newly revised criteria may be costly and difficult. A probabilistic safety analysis (PSA) provides a rational safety assessment and decision-making tool managing the various sources of uncertainty that may impact dam performance. Fragility analysis, which depicts fl%e uncertainty in the safety margin above specified hazard levels, is a fundamental tool in a PSA. This study presents a methodology for developing fragilities of concrete gravity dams to assess their performance against hydrologic and seismic hazards. Models of varying degree of complexity and sophistication were considered and compared. The methodology is illustrated using the Bluestone Dam on the New River in West Virginia, which was designed in the late 1930's. The hydrologic fragilities showed that the Eluestone Dam is unlikely to become unstable at the revised probable maximum flood (PMF), but it is likely that there will be significant cracking at the heel ofthe dam. On the other hand, the seismic fragility analysis indicated that sliding is likely, if the dam were to be subjected to a maximum credible earthquake (MCE). Moreover, there will likely be tensile cracking at the neck of the dam at this level of seismic excitation. Probabilities of relatively severe limit states appear to be only marginally affected by extremely rare events (e.g. the PMF and MCE). Moreover, the risks posed by the extreme floods and earthquakes were not balanced for the Bluestone Dam, with seismic hazard posing a relatively higher risk.

Commercial truck crash injury severity analysis using gradient boosting data mining model.

PubMed

Zheng, Zijian; Lu, Pan; Lantz, Brenda

2018-06-01

Truck crashes contribute to a large number of injuries and fatalities. This study seeks to identify the contributing factors affecting truck crash severity using 2010 to 2016 North Dakota and Colorado crash data provided by the Federal Motor Carrier Safety Administration. To fulfill a gap of previous studies, broad considerations of company and driver characteristics, such as company size and driver's license class, along with vehicle types and crash characteristics are researched. Gradient boosting, a data mining technique, is applied to comprehensively analyze the relationship between crash severities and a set of heterogeneous risk factors. Twenty five variables were tested and 22 of them are identified as significant variables contributing to injury severities, however, top 11 variables account for more than 80% of injury forecasting. The relative variable importance analysis is conducted and furthermore marginal effects of all contributing factors are also illustrated in this research. Several factors such as trucking company attributes (e.g., company size), safety inspection values, trucking company commerce status (e.g., interstate or intrastate), time of day, driver's age, first harmful events, and registration condition are found to be significantly associated with crash injury severity. Even though most of the identified contributing factors are significant for all four levels of crash severity, their relative importance and marginal effect are all different. For the first time, trucking company and driver characteristics are proved to have significant impact on truck crash injury severity. Some of the results in this study reinforce previous studies' conclusions. Findings in this study can be helpful for transportation agencies to reduce injury severity, and develop efficient strategies to improve safety. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Deep structure of the Algerian margin offshore Great Kabylie: Preliminary results of an offshore-onshore seismic profile (SPIRAL campaign)

NASA Astrophysics Data System (ADS)

Chafik, Aidi; Abd el Karim, Yelles; Marie-Odile, Beslier; Frauke, Klingelhoefer; Philippe, Schnurle; Rabah, Bracene; Hamou, Djellit; Audrey, Galve; Laure, Schenini; Françoise, Sage; Abdallah, Bounif Mohand ou; Philippe, Charvis

2013-04-01

In October-November 2009 the Algerian-French SPIRAL research program (Sismique Profonde et Investigation Régionale du Nord de l'ALgérie) was conducted onboard the R/V Atalante in order to understand the deep structure and tectonic history of the Algerian Margin using multichannel and wide-angle seismic data. An extensive dataset was acquired along five regional transects off Algeria, from Arzew Bay to the west, to Annaba to the east. The profiles range from 80 to 180 km long and around 40 ocean-bottom seismometers were deployed on each profile. All profiles were extended on land up to 125 km by land-stations to better constrain the structure of the margin and the nature of the ocean-continent transition zone. We present the preliminary results from modeling of deep and superficial structures in the central Algerian margin, more precisely in the region of the Great Kabylie where a N-S transect of combined wide-angle data using a set of 40 OBS (ocean bottom seismometer) and 24 on-land seismological stations and reflection seismic data was acquired. The profile with a total length of about 260 km (140 km offshore and approximately 124 km onshore), crosses from the north to south the Algeria-Provence Basin, the central Algerian Margin and onshore the geological unit of the Great Kabylie that represents the Kabylides block and the transitional zone between the internal zone (Kabylides) and the external zone in the central Algeria. The network (OBS and seismological stations), recorded 1031 low frequency air gun shots in order to ensure good penetration in the crust. Travel time tomography of first arrivals time of OBS data has yielded a preliminary model of P wave velocities along the profile. In the oceanic domain, a relatively thin crust of about 5 km thickness was imaged overlying a mantle characterized by seismic velocities of about 8 km/s, and covered by a thin sedimentary layer of about 2 km thickness. For the study of the sedimentary cover near the margin several MCS profiles were acquired in this region during the Spiral survey and previously by the Maradja cruise. This data sets allows to image reactivation of the Algerian Margin in this region.

Tectonic Evolution of Mozambique Ridge in East African continental margin

NASA Astrophysics Data System (ADS)

Tang, Yong

2017-04-01

Tectonic Evolution of Mozambique Ridge in East African continental margin Yong Tang He Li ES.Mahanjane Second Institute of Oceanography,SOA,Hangzhou The East Africa passive continental margin is a depression area, with widely distributed sedimentary wedges from southern Mozambique to northern Somali (>6500km in length, and about 6km in thickness). It was resulted from the separation of East Gondwana, and was developed by three stages: (1) rifting in Early-Middle Jurassic; (2) spreading from Late Jurassic to Early Cretaceous; (3) drifting since the Cretaceous period. Tectonic evolution of the Mozambique continental margin is distinguished by two main settings separated by a fossil transform, the Davie Fracture Zone; (i) rifting and transform setting in the northern margin related to opening of the Somali and Rovuma basins, and (ii) rifting and volcanism setting during the opening of the Mozambique basin in the southern margin. 2D reflection seismic investigation of the crustal structure in the Zambezi Delta Depression, provided key piece of evidence for two rifting phases between Africa and Antarctica. The magma-rich Rift I phase evolved from rift-rift-rift style with remarkable emplacement of dyke swarms (between 182 and 170 Ma). Related onshore outcrops are extensively studied, the Karoo volcanics in Mozambique, Zimbabwe and South Africa, all part of the Karoo "triple-junction". These igneous bodies flow and thicken eastwards and are now covered by up to 5 km of Cretaceous and Tertiary sediments and recorded by seismic and oil exploration wells. Geophysical and geological data recorded during oceanographic cruises provide very controversial results regarding the nature of the Mozambique Ridge. Two conflicting opinions remains open, since the early expeditions to the Indian Ocean, postulating that its character is either magmatic (oceanic) or continental origin. We have carried out an China-Mozambique Joint Cruise(CMJC) on southern Mozambique Basin on 1st June to 23rd June,2017. The CMJC used multi-beam bathymetric, sub-bottom profiling, multi-channel reflection seismic, wide-angle refraction and Gravity to collect data. The preliminary new findings include: (1) the thick-layer sediments during Tertiary and Cretaceous; (2) the southern continental margin mainly affected by the rifting and volcanism during the stages of the Mozambique Basin formation; (3) the Cretaceous sediments located along the Mozambique Basin in both marine and continental environment.

Polar continental margins: Studies off East Greenland

NASA Astrophysics Data System (ADS)

Mienert, J.; Thiede, J.; Kenyon, N. H.; Hollender, F.-J.

The passive continental margin off east Greenland has been shaped by tectonic and sedimentary processes, and typical physiographic patterns have evolved over the past few million years under the influence of the late Cenozoic Northern Hemisphere glaciations. The Greenland ice shield has been particularly affected.GLORIA (Geological Long Range Inclined Asdic), the Institute of Oceanographic Sciences' (IOS) long-range, side-scan sonar, was used on a 1992 RV Livonia cruise to map large-scale changes in sedimentary patterns along the east Greenland continental margin. The overall objective of this research program was to determine the variety of large-scale seafloor processes to improve our understanding of the interaction between ice sheets, current regimes, and sedimentary processes. In cooperation with IOS and the RV Livonia, a high-quality set of seafloor data has been produced. GLORIA'S first survey of east Greenland's continental margin covered several 1000- × 50-km-wide swaths (Figure 1) and yielded an impressive sidescan sonar image of the complete Greenland Basin and margin (about 250,000 km2). A mosaic of the data was made at a scale of 1:375,000. The base map was prepared with a polar stereographic projection having a standard parallel of 71°.

Insights into crustal structure of the Eastern North American Margin from community multichannel seismic and potential field data

NASA Astrophysics Data System (ADS)

Davis, J. K.; Becel, A.; Shillington, D. J.; Buck, W. R.

2017-12-01

In the fall of 2014, the R/V Marcus Langseth collected gravity, magnetic, and reflection seismic data as part of the Eastern North American Margin Community Seismic Experiment. The dataset covers a 500 km wide section of the Mid-Atlantic passive margin offshore North Carolina, which formed after the Mesozoic breakup of the supercontinent Pangaea. Using these seismic and potential field data, we present observations and interpretations along two cross margin and one along-margin profiles. Analyses and interpretations are conducted using pre-stack depth migrated reflection seismic profiles in conjunction with forward modeling of shipboard gravity and magnetic anomalies. Preliminary interpretations of the data reveal variations in basement character and structure across the entire transition between continental and oceanic domains. These interpretations help provide insight into the origin and nature of the prominent East Coast and Blake Spur magnetic anomalies, as well as the Inner Magnetic Quiet Zone which occupies the domain between the anomalies. Collectively, these observations can aid in deciphering the rift-to-drift transition during the breakup of North America and West Africa and formation of the Central Atlantic.

A Community Seismic Experiment in the ENAM Primary Site

NASA Astrophysics Data System (ADS)

Van Avendonk, H. J.

2012-12-01

Eastern North America (ENAM) was chosen as a GeoPRISMS Rift Initiation and Evolution primary site because it represents a mature continental margin with onshore and offshore rift basins in which the record of extension and continental break-up is preserved. The degree to which syn-rift magmatism and preexisting lithospheric weaknesses controlled the evolution of the margin can be further investigated if we image its 3-D structure at small and large length scales with active-source and earthquake seismic imaging. In the Summer of 2012 we submitted a proposal to the US National Science Foundation for an ambitious plan for data acquisition on a 400 km wide section of the mid-Atlantic East Coast margin around Cape Hatteras, from unextended continental lithosphere onshore to mature oceanic lithosphere offshore. This area includes an important along-strike transition in the morphology of the margin from the Carolina Trough to the Baltimore Canyon Trough, and two major fracture zones that are associated with significant offsets at the modern Mid-Atlantic Ridge. The study area also covers several features representing the post-rift modification of the margin by slope instability and fluid flow. As the Earthscope Transportable Array reaches the East Coast of the US in 2013 and 2014, we will have an unprecedented opportunity to image the detailed structure of the rifted margin. To make effective use of the research infrastructure, including the seismic vessel R/V Marcus Langseth, the Earthscope seismic instrumentation, and US OBS Instrument Pool, we propose to collect a suite of seismic data at the mid-Atlantic margin in the context of a community-driven experiment with completely open data access. This multi-faceted seismic experiment offers an immense opportunity for education of young scientists. We propose an integrated education effort during and after acquisition. The science and field parties for data acquisition will largely consist of young scientists, who will be chosen by application. Following the cruise, we propose to hold two short courses on multi-channel seismic reflection and wide-angle reflection and refraction data processing using the new seismic data. The acquisition of all seismic data, archiving of the data in existing data bases, and distribution to the community will take two years. Afterwards, proposals developed by any member of the science community can be submitted for further data analysis and testing of current scientific hypotheses regarding the evolution and dynamics of the ENAM margin.

A primer on marginal effects-part II: health services research applications.

PubMed

Onukwugha, E; Bergtold, J; Jain, R

2015-02-01

Marginal analysis evaluates changes in a regression function associated with a unit change in a relevant variable. The primary statistic of marginal analysis is the marginal effect (ME). The ME facilitates the examination of outcomes for defined patient profiles or individuals while measuring the change in original units (e.g., costs, probabilities). The ME has a long history in economics; however, it is not widely used in health services research despite its flexibility and ability to provide unique insights. This article, the second in a two-part series, discusses practical issues that arise in the estimation and interpretation of the ME for a variety of regression models often used in health services research. Part one provided an overview of prior studies discussing ME followed by derivation of ME formulas for various regression models relevant for health services research studies examining costs and utilization. The current article illustrates the calculation and interpretation of ME in practice and discusses practical issues that arise during the implementation, including: understanding differences between software packages in terms of functionality available for calculating the ME and its confidence interval, interpretation of average marginal effect versus marginal effect at the mean, and the difference between ME and relative effects (e.g., odds ratio). Programming code to calculate ME using SAS, STATA, LIMDEP, and MATLAB are also provided. The illustration, discussion, and application of ME in this two-part series support the conduct of future studies applying the concept of marginal analysis.

The margin of internal exposure (MOIE) concept for dermal risk assessment based on oral toxicity data - A case study with caffeine.

PubMed

Bessems, Jos G M; Paini, Alicia; Gajewska, Monika; Worth, Andrew

2017-12-01

Route-to-route extrapolation is a common part of human risk assessment. Data from oral animal toxicity studies are commonly used to assess the safety of various but specific human dermal exposure scenarios. Using theoretical examples of various user scenarios, it was concluded that delineation of a generally applicable human dermal limit value is not a practicable approach, due to the wide variety of possible human exposure scenarios, including its consequences for internal exposure. This paper uses physiologically based kinetic (PBK) modelling approaches to predict animal as well as human internal exposure dose metrics and for the first time, introduces the concept of Margin of Internal Exposure (MOIE) based on these internal dose metrics. Caffeine was chosen to illustrate this approach. It is a substance that is often found in cosmetics and for which oral repeated dose toxicity data were available. A rat PBK model was constructed in order to convert the oral NOAEL to rat internal exposure dose metrics, i.e. the area under the curve (AUC) and the maximum concentration (C max ), both in plasma. A human oral PBK model was constructed and calibrated using human volunteer data and adapted to accommodate dermal absorption following human dermal exposure. Use of the MOIE approach based on internal dose metrics predictions provides excellent opportunities to investigate the consequences of variations in human dermal exposure scenarios. It can accommodate within-day variation in plasma concentrations and is scientifically more robust than assuming just an exposure in mg/kg bw/day. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Crustal structure from the Faroes Shelf to the Norwegian Basin

NASA Astrophysics Data System (ADS)

Roberts, A. W.; White, R. S.; Kusznir, N. J.; Christie, P.; Roberts, A. M.; Isimm Team

2003-04-01

We show the crustal structure along a 400km seismic profile extending across a prime example of a volcanically rifted margin, from the Faroes shelf across the continent-ocean boundary northeast of the Faroe Islands, and 100km into oceanic crust of the Norwegian Sea formed immediately after continental break-up. 85 4-component OBS were used for the survey, giving wide-angle arrivals visible to beyond 120km offset. The survey was complemented by a 12 km Q-streamer profile along the same line. Integration of the normal incidence through wide-angle arrivals for the OBS and streamer data allow us to make a constrained velocity model through the active crust and into the upper mantle. We used a large airgun source comprising 14 guns with a total volume of 6,360 cu. in. towed at 20m depth. The resulting output was dominated by low frequencies (peak at 9Hz) to allow improved imaging through the basalts. A thickened oceanic crust is found, indicative of high temperatures caused by the Iceland mantle plume, and the presence of clear seaward dipping reflectors is evidence of extrusive lavas. Underplating is also inferred on the margin from the high seismic velocities in the lower crust. Academia and industry seek to understand magmatic margin evolution for its impact on deep water hydrocarbon prospecting. The NE Atlantic has been chosen as our research area because of its accessibility, wealth of related data and current exploration on the Atlantic margin. The iSIMM programme's long term goals are to characterise volcanically rifted margins and to develop theoretical models of the formation and subsidence of rifted margins. iSIMM investigators are: R.S. White (1), N.J. Kusznir (2), P.A.F. Christie (3), A.M. Roberts (4), N. Hurst (2), Z.C. Lunnon (1,3), C.J. Parkin (1), A.W. Roberts (1), L.K. Smith (1), R. Spitzer (1), V. Tymms (2), A. Davies (1), A. Surendra (1), with funding from NERC, Agip UK, BP, Amerada Hess Ltd., Anadarko, Conoco, Phillips, Shell, Statoil, and WesternGeco.

A new model for the development of the active Afar volcanic margin

NASA Astrophysics Data System (ADS)

Pik, Raphaël; Stab, Martin; Bellahsen, Nicolas; Leroy, Sylvie

2016-04-01

Volcanic passive margins, that represent more than the three quarters of continental margins worldwide, are privileged witnesses of the lithospheric extension processes thatform new oceanic basins. They are characterized by voluminous amounts of underplated, intruded and extruded magmas, under the form of massive lavas prisms (seaward-dipping reflectors, or SDR) during the course of thinning and stretching of the lithosphere, that eventually form the ocean-continent transition. The origin and mechanisms of formation of these objects are still largely debated today. We have focussed our attention in the last few years on the Afar volcanic province which represents an active analogue of such volcanic margins. We explored the structural and temporal relationships that exist between the development of the major thinning and stretching structures and the magmatic production in Central Afar. Conjugate precise fieldwork analysis along with lavas geochronology allowed us to revisit the timing and style of the rift formation, since the early syn-rift period of time in the W-Afar marginal area to present days. Extension is primarily accommodated over a wide area at the surface since the very initial periods of extension (~ 25 Ma) following the emplacement of Oligocene CFBs. We propose in our reconstruction of central Afar margin history that extension has been associated with important volumes of underplated mafic material that compensate crustal thinning. This has been facilitated by major crustal-scale detachments that help localize the thinning and underplating at depth. In line with this 'magmatic wide-rift' mode of extension, we demonstrate that episodic extension steps alternate with more protracted magmatic phases. The production of syn-rift massive flood basalts (~ 4 Ma) occurs after early thinning of both the crust and the lithosphere, which suggests that SDR formation, is controlled by previous tectonic event. We determined how the melting regime evolved in response to the deformation of the lithosphere, through a petrological and geochemical study of the pre- to syn-rift lavas and concluded that the lithospheric mantle experienced the combined effect of post-plume cooling, but also thinning during the Miocene. This is accompanied by the early channelization of the plume head into narrower zones, which helped focus extension at the future volcanic margins location. The anomalous mantle potential temperature increased during the very last localization phase (< 1 Ma), which leads us to argue in favor of the focussed activity of a plume stem below the volcanic margin, instead of purely passive adiabatic decompression. Our new interpretation of the regional isotopic signatures of lavas depicts a clear framework of the Afar plume and lithospheric mantle relationships to on going extension and segmentation of these margins, and allow us to propose new contrasted models for their development.

Thick tissue diffusion model with binding to optimize topical staining in fluorescence breast cancer margin imaging

NASA Astrophysics Data System (ADS)

Xu, Xiaochun; Kang, Soyoung; Navarro-Comes, Eric; Wang, Yu; Liu, Jonathan T. C.; Tichauer, Kenneth M.

2018-03-01

Intraoperative tumor/surgical margin assessment is required to achieve higher tumor resection rate in breast-conserving surgery. Though current histology provides incomparable accuracy in margin assessment, thin tissue sectioning and the limited field of view of microscopy makes histology too time-consuming for intraoperative applications. If thick tissue, wide-field imaging can provide an acceptable assessment of tumor cells at the surface of resected tissues, an intraoperative protocol can be developed to guide the surgery and provide immediate feedback for surgeons. Topical staining of margins with cancer-targeted molecular imaging agents has the potential to provide the sensitivity needed to see microscopic cancer on a wide-field image; however, diffusion and nonspecific retention of imaging agents in thick tissue can significantly diminish tumor contrast with conventional methods. Here, we present a mathematical model to accurately simulate nonspecific retention, binding, and diffusion of imaging agents in thick tissue topical staining to guide and optimize future thick tissue staining and imaging protocol. In order to verify the accuracy and applicability of the model, diffusion profiles of cancer targeted and untargeted (control) nanoparticles at different staining times in A431 tumor xenografts were acquired for model comparison and tuning. The initial findings suggest the existence of nonspecific retention in the tissue, especially at the tissue surface. The simulator can be used to compare the effect of nonspecific retention, receptor binding and diffusion under various conditions (tissue type, imaging agent) and provides optimal staining and imaging protocols for targeted and control imaging agent.

The Caribbean-South American plate boundary at 65°W: Results from wide-angle seismic data

NASA Astrophysics Data System (ADS)

Bezada, M. J.; Magnani, M. B.; Zelt, C. A.; Schmitz, M.; Levander, A.

2010-08-01

We present the results of the analysis of new wide-angle seismic data across the Caribbean-South American plate boundary in eastern Venezuela at about 65°W. The ˜500 km long profile crosses the boundary in one of the few regions dominated by extensional structures, as most of the southeastern Caribbean margin is characterized by the presence of fold and thrust belts. A combination of first-arrival traveltime inversion and simultaneous inversion of PmP and Pn arrivals was used to develop a P wave velocity model of the crust and the uppermost mantle. At the main strike-slip fault system, we image the Cariaco Trough, a major pull-apart basin along the plate boundary. The crust under the Southern Caribbean Deformed Belt exhibits a thickness of ˜15 km, suggesting that the Caribbean Large Igneous Province extends to this part of the Caribbean plate. The velocity structures of basement highs and offshore sedimentary basins imaged by the profile are comparable to those of features found in other parts of the margin, suggesting similarities in their tectonic history. We do not image an abrupt change in Moho depth or velocity structure across the main strike-slip system, as has been observed elsewhere along the margin. It is possible that a terrane of Caribbean island arc origin was accreted to South America at this site and was subsequently bisected by the strike-slip fault system. The crust under the continental portion of the profile is thinner than observed elsewhere along the margin, possibly as a result of thinning during Jurassic rifting.

North America as an exotic terrane'' and the origin of the Appalachian--Andean Mountain system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dalziel, I.W.D; Gahagan, L.M.; Dalla Salda, L.H.

1992-01-01

North America was sutured to Gondwana in the terminal Alleghanian event of Appalachian orogenesis, thus completing the late Paleozoic assembly of Pangea. The suggestion that the Pacific margins of East Antarctica-Australia and Laurentia may have been juxtaposed during the Neoproterozoic prompts reevaluation of the widely held assumptions that the ancestral Appalachian margin rifted from northwestern Africa during the earliest Paleozoic opening of Iapetus, and remained juxtaposed to that margin, even though widely separated from it at times, until the assembly of Pangea. The lower Paleozoic carbonate platform of northwestern Argentina has been known for a long time to contain Olenellidmore » trilobites of the Pacific or Columbian realm. Although normally regarded as some kind of far-travelled terrane that originated along the Appalachian margin of Laurentia, it has recently been interpreted as a fragment detached from the Ouachita embayment of Laurentia following Taconic-Famatinian collision with Gondwana during the Ordovician. The Oaxaca terrane of Mexico, on the other hand, contains a Tremadocian trilobite fauna of Argentine-Bolivian affinities, and appears to have been detached from Gondwana following the same collision. The Wilson cycle'' of Iapetus ocean basin opening and closing along the Appalachian and Andean orogens may have involved more than one such continental collision during clockwise drift of Laurentia around South America following late Neoproterozoic to earliest Cambrian separation. Together with the collisions of baltic and smaller terranes with Laurentia, this could explain the protracted Paleozoic orogenic history of both the Appalachian and proto-Andean orogens.« less

Assuring Ground-Based Detect and Avoid for UAS Operations

NASA Technical Reports Server (NTRS)

Denney, Ewen W.; Pai, Ganeshmadhav Jagadeesh; Berthold, Randall; Fladeland, Matthew; Storms, Bruce; Sumich, Mark

2014-01-01

One of the goals of the Marginal Ice Zones Observations and Processes Experiment (MIZOPEX) NASA Earth science mission was to show the operational capabilities of Unmanned Aircraft Systems (UAS) when deployed on challenging missions, in difficult environments. Given the extreme conditions of the Arctic environment where MIZOPEX measurements were required, the mission opted to use a radar to provide a ground-based detect-and-avoid (GBDAA) capability as an alternate means of compliance (AMOC) with the see-and-avoid federal aviation regulation. This paper describes how GBDAA safety assurance was provided by interpreting and applying the guidelines in the national policy for UAS operational approval. In particular, we describe how we formulated the appropriate safety goals, defined the processes and procedures for system safety, identified and assembled the relevant safety verification evidence, and created an operational safety case in compliance with Federal Aviation Administration (FAA) requirements. To the best of our knowledge, the safety case, which was ultimately approved by the FAA, is the first successful example of non-military UAS operations using GBDAA in the U.S. National Airspace System (NAS), and, therefore, the first nonmilitary application of the safety case concept in this context.

Evaluation of the in-service safety performance of safety-shape and vertical concrete barriers.

DOT National Transportation Integrated Search

2011-12-16

Roadside concrete barriers have been widely used to protect errant motorists from hitting : roadside hazards or obstacles. Two concrete barrier profiles, vertical and safety-shape, have been used : for this purpose. The safety-shape profile has been ...

Distribution and Characteristics of Seafloor Seepage Features in the Active Margin Offshore of SW Taiwan

NASA Astrophysics Data System (ADS)

Chen, T. T.; Hsu, H. H.; Liu, C. S.; Su, C. C.; Paull, C. K.; Chen, Y. H.; Caress, D. W.; Gwiazda, R.; Lundsten, E. M.

2017-12-01

In the active margin offshore of southwest (SW) Taiwan, west-vergent imbricated thrusts, folds and dipping strata are the main structural features. This is also the area where gas hydrates are widely distributed beneath the seafloor. Fluids from deep strata may migrate upwards along porous dipping layers or faults and then vent out to form seafloor seepage features in many of the gas hydrate prospects. A joint survey was conducted in May 2017 using MBARI mapping AUV and miniROV to investigate the seafloor seepage features. Numerous comet-shaped depressions (CSD) are mapped along flanks of several anticlinal ridges, and four carbonate mounds around CSD are observed from the ultra-high-resolution (1-m lateral resolution) bathymetry data collected by AUV. Samples of the carbonate mounds were collected by the mini-ROV, and their mineral compositions contain dolomite and ankerite. The AUV collected chirp sonar profiles and previously collected surface ship multichannel seismic reflection profiles across these seafloor features show that potential fluid migration pathways connect free gas trapped below the base of gas hydrate stability zone and the seafloor in the vicinity of these features. Our study suggests that the CSD could be an indicator of seafloor seepage and may be distribution widely in the active margin setting.

Salivary contamination during bonding procedures with a one-bottle adhesive system.

PubMed

Fritz, U B; Finger, W J; Stean, H

1998-09-01

The effect of salivary contamination of enamel and dentin on bonding efficacy of an experimental one-bottle resin adhesive was investigated. The adhesive was a light-curing urethane dimethacrylate/hydroxyethyl methacrylate/4-methacryloxyethyl trimellitate anhydride mixture dissolved in acetone. Evaluation parameters were shear bond strength and marginal gap width in a dental cavity. Apart from a control group without contamination (group 1), etched enamel and dentin were (2) contaminated with saliva and air dried; (3) contaminated, rinsed, and blot dried; (4) coated with adhesive, contaminated, rinsed, and blot dried; (5) coated with adhesive, light cured, contaminated, rinsed, and air dried; or (6) treated as in group 5, with additional adhesive application after air drying. There was no negative effect in groups 3 and 4, compared with control. Air drying after salivary contamination (group 2) resulted in low shear bond strengths and wide marginal gaps. Contamination of the cured adhesive layer (groups 5 and 6) had no adverse effect on enamel shear bond strengths, but resulted in 50% reduced dentin shear bond strengths and wide marginal gaps. The one-bottle adhesive system is relatively insensitive to salivary contamination, provided that the contamination occurs prior to light curing of the adhesive and is carefully rinsed and blot dried. Salivary contact after adhesive curing must be avoided.

Ultrasonographic Differentiation Between Nodular Hyperplasia and Neoplastic Follicular-Patterned Lesions of the Thyroid Gland.

PubMed

Song, Yong Sub; Kim, Ji-Hoon; Na, Dong Gyu; Min, Hye Sook; Won, Jae-Kyung; Yun, Tae Jin; Choi, Seung Hong; Sohn, Chul-Ho

2016-08-01

We evaluate the gray-scale ultrasonographic characteristics that differentiate between nodular hyperplasia (NH) and neoplastic follicular-patterned lesions (NFPLs) of the thyroid gland. Ultrasonographic features of 750 patients with 832 thyroid nodules (NH, n = 361; or NFPLs, follicular adenoma, n = 123; follicular carcinoma, n = 159; and follicular variant papillary carcinoma, n = 189) were analyzed. Except for echogenicity, over two-thirds of the cases of NH and NFPLs share the ultrasonographic characteristics of solid internal content, a well-defined smooth margin and round-to-ovoid shape. Independent predictors for NH were non-solid internal content (sensitivity 27.1%, specificity 90.2%), isoechogenicity (sensitivity 69.5%, specificity 63.5%) and an ill-defined margin (sensitivity 18.8%, specificity 94.5%). Independent predictors for NFPLs were hypoechogenicity (sensitivity 60.5%, specificity 70.4%), marked hypoechogenicity (sensitivity 2.8%, specificity 99.4%) and taller-than-wide shape (sensitivity 6.6%, specificity 98.1%). Although NH and NFPLs commonly share ultrasonographic characteristics, non-solid internal content and ill-defined margin are specific to NH and marked hypoechogenicity and taller-than-wide shape are specific to NFPLs. Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

Development and evaluation of a connective tissue phantom model for subsurface visualization of cancers requiring wide local excision

NASA Astrophysics Data System (ADS)

Samkoe, Kimberley S.; Bates, Brent D.; Tselepidakis, Niki N.; DSouza, Alisha V.; Gunn, Jason R.; Ramkumar, Dipak B.; Paulsen, Keith D.; Pogue, Brian W.; Henderson, Eric R.

2017-12-01

Wide local excision (WLE) of tumors with negative margins remains a challenge because surgeons cannot directly visualize the mass. Fluorescence-guided surgery (FGS) may improve surgical accuracy; however, conventional methods with direct surface tumor visualization are not immediately applicable, and properties of tissues surrounding the cancer must be considered. We developed a phantom model for sarcoma resection with the near-infrared fluorophore IRDye 800CW and used it to iteratively define the properties of connective tissues that typically surround sarcoma tumors. We then tested the ability of a blinded surgeon to resect fluorescent tumor-simulating inclusions with ˜1-cm margins using predetermined target fluorescence intensities and a Solaris open-air fluorescence imaging system. In connective tissue-simulating phantoms, fluorescence intensity decreased with increasing blood concentration and increased with increasing intralipid concentrations. Fluorescent inclusions could be resolved at ≥1-cm depth in all inclusion concentrations and sizes tested. When inclusion depth was held constant, fluorescence intensity decreased with decreasing volume. Using targeted fluorescence intensities, a blinded surgeon was able to successfully excise inclusions with ˜1-cm margins from fat- and muscle-simulating phantoms with inclusion-to-background contrast ratios as low as 2∶1. Indirect, subsurface FGS is a promising tool for surgical resection of cancers requiring WLE.

Geophysical evidence for a transform margin offshore Western Algeria: a witness of a subduction-transform edge propagator?

NASA Astrophysics Data System (ADS)

Badji, Rabia; Charvis, Philippe; Bracene, Rabah; Galve, Audrey; Badsi, Madjid; Ribodetti, Alessandra; Benaissa, Zahia; Klingelhoefer, Frauke; Medaouri, Mourad; Beslier, Marie-Odile

2015-02-01

For the first time, a deep seismic data set acquired in the frame of the Algerian-French SPIRAL program provides new insights regarding the origin of the westernmost Algerian margin and basin. We performed a tomographic inversion of traveltimes along a 100-km-long wide-angle seismic profile shot over 40 ocean bottom seismometers offshore Mostaganem (Northwestern Algeria). The resulting velocity model and multichannel seismic reflection profiles show a thin (3-4 km thick) oceanic crust. The narrow ocean-continent transition (less than 10 km wide) is bounded by vertical faults and surmounted by a narrow almost continuous basin filled with Miocene to Quaternary sediments. This fault system, as well as the faults organized in a negative-flower structure on the continent side, marks a major strike-slip fault system. The extremely sharp variation of the Moho depth (up to 45 ± 3°) beneath the continental border underscores the absence of continental extension in this area. All these features support the hypothesis that this part of the margin from Oran to Tenes, trending N65-N70°E, is a fossil subduction-transform edge propagator fault, vestige of the propagation of the edge of the Gibraltar subduction zone during the westward migration of the Alborán domain.

Safety in the Chemical Laboratory: Developing Departmental Safety Procedures.

ERIC Educational Resources Information Center

Renfrew, Malcolm M., Ed.; Palladino, George F.

1980-01-01

Presents rationale and guidelines for development of Safety Standard Operating Procedures (Safety SOP) specific for local conditions. Includes an outline of a Safety SOP developed for a department primarily focused on undergraduate education with a wide variety of expertise from common laborer to PhD with 20 years experience. (Author/JN)

The Maliac Ocean: the origin of the Tethyan Hellenic ophiolites

NASA Astrophysics Data System (ADS)

Ferriere, Jacky; Baumgartner, Peter O.; Chanier, Frank

2016-10-01

The Hellenides, part of the Alpine orogeny in Greece, are rich in ophiolitic units. These ophiolites and associated units emplaced during Jurassic obduction, testify for the existence of one, or several, Tethyan oceanic realms. The paleogeography of these oceanic areas has not been precisely described. However, all the authors now agree on the presence of a main Triassic-Jurassic ocean on the eastern side of the Pelagonian zone (Vardar Domain). We consider that this Maliac Ocean is the most important ocean in Greece and Albania. Here, we limit the detailed description of the Maliac Ocean to the pre-convergence period of approximately 70 Ma between the Middle Triassic rifting to the Middle Jurassic convergence period. A quick overview on the destiny of the different parts of the Maliac Ocean during the convergence period is also proposed. The studied exposures allow to reconstruct: (1) the Middle to Late Triassic Maliac oceanic lithosphere, corresponding to the early spreading activity at a Mid-Oceanic Ridge; (2) the Western Maliac Margin, widely exposed in the Othris and Argolis areas; (3) the Eastern-Maliac Margin in the eastern Vardar domain (Peonias and Paikon zones). We established the following main characteristics of the Maliac Ocean: (1) the Middle Triassic rifting marked by a rapid subsidence and volcanism seems to be short-lived (few My); (2) the Maliac Lithosphere is only represented by Middle to Late Triassic units, especially the Fourka unit, composed of WPB-OIB and MORB pillow-lavas, locally covered by a pelagic Middle Triassic to Middle Jurassic sedimentary cover; (3) the Western Margin is the most complete and our data allow to distinguish a proximal and a deeper distal margin; (4) the evolution of the Eastern Margin (Peonias and Paikon series) is similar to that of the W-Margin, except for its Jurassic terrigenous sediments, while the proximal W-Margin was dominated by calcarenites; (5) we show that the W- and E-margins are not Volcanic Passive Margins; and (6) during the Middle Jurassic convergence period, the Eastern Margin became an active margin and both margins were affected by obduction processes.

The trophic and metabolic pathways of foraminifera in the Arabian Sea: evidence from cellular stable isotopes

NASA Astrophysics Data System (ADS)

Jeffreys, R. M.; Fisher, E. H.; Gooday, A. J.; Larkin, K. E.; Wolff, G. A.; Billett, D. S. M.

2014-12-01

The Arabian Sea is a region of elevated productivity with the highest globally recorded fluxes of particulate organic matter (POM) to the deep ocean, providing an abundant food source for fauna at the seafloor. However, benthic communities are also strongly influenced by an intense oxygen minimum zone (OMZ), which impinges on the continental slope at bathyal depths. We compared the trophic ecology of foraminifera on the Oman and Pakistan margins of the Arabian Sea (140-3185 m water depth). Organic carbon concentrations of surficial sediments were higher on the Oman margin (3.32 ± 1.4%) compared to the Pakistan margin (2.45 ± 1.1%) and sedimentary organic matter (SOM) quality estimated from the Hydrogen Index was also higher on the Oman margin (300-400 mg HC (mg TOC)-1) compared to the Pakistan margin (<250 mg HC (mg TOC)-1). δ13C and δ15N values of sediments were similar on both margins (-20 and 8‰, respectively). Stable isotope analysis (SIA) showed that foraminiferal cells had a wide range of δ13C values (-25.5 to -11.5‰), implying that they utilise multiple food sources; indeed δ13C values varied between depths, foraminiferal types and between the two margins. Foraminifera had broad ranges in δ15N values (-7.8 to 27.3‰). The enriched values suggest that some species may store nitrate to utilise in respiration; this was most notable on the Pakistan margin. Depleted foraminiferal δ15N values were identified on both margins, particularly the Oman margin, and may reflect feeding on chemosynthetic bacteria. We suggest that differences in productivity regimes between the two margins may be responsible for the differences observed in foraminiferal isotopic composition. In addition, at the time of sampling, whole jellyfish carcasses (Crambionella orsini) and a carpet of jelly detritus were observed across the Oman margin transect. Associated chemosynthetic bacteria may have provided an organic-rich food source for foraminifera at these sites. Our data suggest that foraminifera in OMZ settings can utilise a variety of food sources and metabolic pathways to meet their energetic demands.

Geomorphology and Neogene tectonic evolution of the Palomares continental margin (Western Mediterranean)

NASA Astrophysics Data System (ADS)

Gómez de la Peña, Laura; Gràcia, Eulàlia; Muñoz, Araceli; Acosta, Juan; Gómez-Ballesteros, María; R. Ranero, César; Uchupi, Elazar

2016-10-01

The Palomares continental margin is located in the southeastern part of Spain. The margin main structure was formed during Miocene times, and it is currently part of the wide deformation zone characterizing the region between the Iberian and African plates, where no well-defined plate boundary occurs. The convergence between these two plates is here accommodated by several structures, including the left lateral strike-slip Palomares Fault. The region is characterized by sparse, low to moderate magnitude (Mw < 5.2) shallow instrumental earthquakes, although large historical events have also occurred. To understand the recent tectonic history of the margin we analyze new high-resolution multibeam bathymetry data and re-processed three multichannel seismic reflection profiles crossing the main structures. The analysis of seafloor morphology and associated subsurface structure provides new insights of the active tectonic features of the area. In contrast to other segments of the southeastern Iberian margin, the Palomares margin contains numerous large and comparatively closely spaced canyons with heads that reach near the coast. The margin relief is also characterized by the presence of three prominent igneous submarine ridges that include the Aguilas, Abubacer and Maimonides highs. Erosive processes evidenced by a number of scars, slope failures, gullies and canyon incisions shape the present-day relief of the Palomares margin. Seismic images reveal the deep structure distinguishing between Miocene structures related to the formation of the margin and currently active features, some of which may reactivate inherited structures. The structure of the margin started with an extensional phase accompanied by volcanic accretion during the Serravallian, followed by a compressional pulse that started during the Latemost Tortonian. Nowadays, tectonic activity offshore is subdued and limited to few, minor faults, in comparison with the activity recorded onshore. The deep Algero-Balearic Basin is affected by surficial processes, associated to halokinesis of Messinian evaporites.

Integrated Advanced Microwave Sounding Unit-A (AMSU-A) METOP Stress Analysis Report (Qual Level Random Vibration) A1 Module

NASA Technical Reports Server (NTRS)

Mehitretter, R.

1996-01-01

Stress analysis of the primary structure of the Meteorological Satellites Project (METSAT) Advanced Microwave Sounding Units-A, A1 Module performed using the Meteorological Operational (METOP) Qualification Level 9.66 grms Random Vibration PSD Spectrum is presented. The random vibration structural margins of safety and natural frequency predictions are summarized.

Airworthiness criteria development for powered-lift aircraft: A program summary

NASA Technical Reports Server (NTRS)

Heffley, R. K.; Stapleford, R. L.; Rumold, R. C.

1977-01-01

A four-year simulation program to develop airworthiness criteria for powered-lift aircraft is summarized. All flight phases affected by use of powered lift (approach, landing, takeoff) are treated with regard to airworthiness problem areas (limiting flight conditions and safety margins: stability, control, and performance; and systems failure). The general features of powered-lift aircraft are compared to conventional aircraft.

Hydraulic patterns and safety margins, from stem to stomata, in three eastern US tree species

Treesearch

D.M. Johnson; K.A. McCulloh; F.C. Meinzer; D.R. Woodruff; D.M. Eissenstat

2011-01-01

Adequate water transport is necessary to prevent stomatal closure and allow for photosynthesis. Dysfunction in the water transport pathway can result in stomatal closure, and can be deleterious to overall plant health and survival. Although much is known about small branch hydraulics, little is known about the coordination of leaf and stem hydraulic function....

A Conceptual Aerospace Vehicle Structural System Modeling, Analysis and Design Process

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

2007-01-01

A process for aerospace structural concept analysis and design is presented, with examples of a blended-wing-body fuselage, a multi-bubble fuselage concept, a notional crew exploration vehicle, and a high altitude long endurance aircraft. Aerospace vehicle structures must withstand all anticipated mission loads, yet must be designed to have optimal structural weight with the required safety margins. For a viable systems study of advanced concepts, these conflicting requirements must be imposed and analyzed early in the conceptual design cycle, preferably with a high degree of fidelity. In this design process, integrated multidisciplinary analysis tools are used in a collaborative engineering environment. First, parametric solid and surface models including the internal structural layout are developed for detailed finite element analyses. Multiple design scenarios are generated for analyzing several structural configurations and material alternatives. The structural stress, deflection, strain, and margins of safety distributions are visualized and the design is improved. Over several design cycles, the refined vehicle parts and assembly models are generated. The accumulated design data is used for the structural mass comparison and concept ranking. The present application focus on the blended-wing-body vehicle structure and advanced composite material are also discussed.

Element Load Data Processor (ELDAP) Users Manual

NASA Technical Reports Server (NTRS)

Ramsey, John K., Jr.; Ramsey, John K., Sr.

2015-01-01

Often, the shear and tensile forces and moments are extracted from finite element analyses to be used in off-line calculations for evaluating the integrity of structural connections involving bolts, rivets, and welds. Usually the maximum forces and moments are desired for use in the calculations. In situations where there are numerous structural connections of interest for numerous load cases, the effort in finding the true maximum force and/or moment combinations among all fasteners and welds and load cases becomes difficult. The Element Load Data Processor (ELDAP) software described herein makes this effort manageable. This software eliminates the possibility of overlooking the worst-case forces and moments that could result in erroneous positive margins of safety and/or selecting inconsistent combinations of forces and moments resulting in false negative margins of safety. In addition to forces and moments, any scalar quantity output in a PATRAN report file may be evaluated with this software. This software was originally written to fill an urgent need during the structural analysis of the Ares I-X Interstage segment. As such, this software was coded in a straightforward manner with no effort made to optimize or minimize code or to develop a graphical user interface.

Evaluation of the breakdown behaviour of ATLAS silicon pixel sensors after partial guard-ring removal

NASA Astrophysics Data System (ADS)

Goessling, C.; Klingenberg, R.; Muenstermann, D.; Wittig, T.

2010-12-01

To avoid geometrical inefficiencies in the ATLAS pixel detector, the concept of shingling is used up to now in the barrel section. For the upgrades of ATLAS, it is desired to avoid this as it increases the volume and material budget of the pixel layers and complicates the cooling. A direct planar edge-to-edge arrangement of pixel modules has not been possible in the past due to about 1100 μm of inactive edge composed of approximately 600 μm of guard rings and 500 μm of safety margin. In this work, the safety margin and guard rings of ATLAS SingleChip sensors were cut at different positions using a standard diamond dicing saw and irradiated afterwards to explore the breakdown behaviour and the leakage current development. It is found that the inactive edge can be reduced to about 400 μm of guard rings with almost no reduction in pre-irradiation testability and leakage current performance. This is in particular important for the insertable b-layer upgrade of ATLAS (IBL) where inactive edges of less than 450 μm width are required.

Grip force regulation during pinch grip lifts under somatosensory guidance: comparison between people with stroke and healthy controls.

PubMed

Blennerhassett, Jannette M; Carey, Leeanne M; Matyas, Thomas A

2006-03-01

To compare the timing and grip force application in a pinch grip task performed under somatosensory guidance in stroke and matched controls and to identify characteristics of impaired grip force regulation after stroke. Matched-pairs control group. University research laboratory. Forty-five people with stroke who could pick up a pen lid using a pinch grip and actively participated in rehabilitation and 45 adults without neurologic conditions or musculoskeletal or skin impairments affecting the hand, matched for age, sex, and hand dominance. Not applicable. Timing and magnitude of grip forces applied during pinch grip lift and hold. Prolonged time to grip and lift objects, and excessive grip force prior to commencing the lift occurred in approximately half of the contralesional (involved) hands of people with stroke. Fluctuating irregular forces and reduced adaptation of the grip safety margin were also observed. Excessive safety margins were not predominant after stroke. Extreme slowing and disorganized sequencing of the grip and lifting forces and difficulty maintaining a stable grip characterized severe dysfunction. Delayed grip formulation and variable grip force application are key characteristics of grip dysfunction after stroke.

Problems and pitfalls in cardiac drug therapy.

PubMed

Stone, S M; Rai, N; Nei, J

2001-01-01

Medical errors in the care of patients may account for 44,000 to 98,000 deaths per year, and 7,000 deaths per year are attributed to medication errors alone. Increasing awareness among health care providers of potential errors is a critical step toward improving the safety of medical care. Because today's medications are increasingly complex, approved at an accelerated rate, and often have a narrow therapeutic window with only a small margin of safety, patient and provider education is critical in assuring optimal therapeutic outcomes. Providers can use electronic resources such as Web sites to keep informed on drug-drug, drug-food, and drug-nutritional supplements interactions.

Radical Recentering: Equity in Educational Leadership Standards

ERIC Educational Resources Information Center

Galloway, Mollie K.; Ishimaru, Ann M.

2015-01-01

Background: The widely adopted Interstate School Leaders Licensure Consortium standards are designed to guide the preparation and professional development of educational leaders. However, the standards' limited mention of race, class, ethnicity, ability, gender, sexuality, or other marginalized identities suggests that addressing persistent…

Commercial wireless technologies for public safety users

DOT National Transportation Integrated Search

2000-07-01

This report on commercial wireless for public safety addresses the issues associated with the use of commercial services for public safety. It then reviews available wireless services for wide area data services: cellular, personal communication and ...

Use of 5-mm-diameter implants: Periotest values related to a clinical and radiographic evaluation.

PubMed

Aparicio, C; Orozco, P

1998-12-01

A modified design of the original Brånemark implant consisting of a cp. Titanium 5.0-mm-diameter self-tapping implant threaded up to the marginal platform has been proposed for specific indications. From February 1992 to November 1995, a total of 185 machined screw implants (Nobel Biocare, Gothenburg, Sweden) were installed in 45 patients to withstand 58 prostheses. Of these, 91 were 3.75-mm diameter and 94 were 5.0-mm wide. Most of the implants were placed in type B and C bone quantity and type 2 and 3 bone quality. A retrospective evaluation with regard to indications, marginal bone remodelling, Periotest values (PTv) and survival rate is presented. PTv and radiographic measurements were made at abutment connection and repeated 3, 6 and 12 months later and thereafter every year. The follow-up ranged from 16 to 55 months (mean 32.9 months) post-loading. Three patients with 8 5.0-mm implants dropped-out of the study at different stages. Out of the wide implants, 1 was expelled during the healing period; 3 were found mobile at the abutment connection; 1 lost its osseointegration suddenly after 2 years of function; 4 belonging to 1 patient did not meet the success criteria due to continuous marginal bone loss. The cumulative success rate of 5.0-mm implants (CSR) after 1 year of function was 97.2% for upper jaws and 88.4% in mandibles, whereas the CSR in maxilla after 48 months was 97.2% and 83.4% in mandibles. The obtained PTv from 5.0-mm-wide fixtures in maxilla and mandibles were respectively 1.1 and 0.6 units lower than those obtained PTv for 3.75-mm-diameter implants in the same patients. The hypothesis that there are differences in the damping capacity of the bone surrounding a 5.0-mm-wide implant compared to the 3.75-mm-diameter implant is supported by the PTv results.

School Safety Handbook. A Handbook for School Business Officials and School Safety Supervisors. Research Bulletin No. 23.

ERIC Educational Resources Information Center

Haering, Franklin C.

A wide variety of school safety guidelines are included in this handbook. The introduction provides guidelines for delegating responsibility to school personnel. Procedures for developing safety policies and for establishing school safety councils and committees are outlined. A chapter on traffic control specifies procedures for pavement marking…

76 FR 11339 - Update to NFPA 101, Life Safety Code, for State Home Facilities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 51 RIN 2900-AN59 Update to NFPA 101, Life Safety Code..., Life Safety Code. The change is designed to assure that State Home facilities meet current industry- wide standards regarding life safety and fire safety. DATES: Effective Date: This final rule is...

Reducing Conservatism in Aircraft Engine Response Using Conditionally Active Min-Max Limit Regulators

NASA Technical Reports Server (NTRS)

May, Ryan D.; Garg, Sanjay

2012-01-01

Current aircraft engine control logic uses a Min-Max control selection structure to prevent the engine from exceeding any safety or operational limits during transients due to throttle commands. This structure is inherently conservative and produces transient responses that are slower than necessary. In order to utilize the existing safety margins more effectively, a modification to this architecture is proposed, referred to as a Conditionally Active (CA) limit regulator. This concept uses the existing Min-Max architecture with the modification that limit regulators are active only when the operating point is close to a particular limit. This paper explores the use of CA limit regulators using a publicly available commercial aircraft engine simulation. The improvement in thrust response while maintaining all necessary safety limits is demonstrated in a number of cases.

Mitigation of the threat posed to transfusion by donors traveling to Zika-affected areas: a Canadian risk-based approach.

PubMed

Germain, Marc; Delage, Gilles; O'Brien, Sheila F; Grégoire, Yves; Fearon, Margaret; Devine, Dana

2017-10-01

The recent spread of the Zika virus to the Americas and the recognition that it can cause severe disease in the developing fetus has prompted the adoption of measures to mitigate the risk that this virus might pose to transfusion safety. In nonendemic countries, the risk to transfusion results from donors traveling to an endemic region. Canada implemented a 21-day temporary deferral for prospective donors who traveled to such regions. We present the rationale for this policy, including a quantitative risk assessment supported by a Monte Carlo simulation. The model considered the following parameters, each with specified values and ranges: the probability that a donor recently returned from a Zika-endemic region, the duration of travel to this region, the daily risk of acquiring Zika while in an endemic region, and the incubation and viremic periods. We ran the simulation 20 times, each with 10 million iterations. In the absence of any travel deferral, 32 donors (range, 20-46 donors) would be able to donate while still being at risk of transmitting Zika, corresponding to a rate of 1:312,500 (range, 1:217,000 to 1:500,000). None of these donors would be viremic beyond 21 days after returning from their travel, with a risk estimated at less than 1:200,000,000. A 21-day temporary travel deferral offers an extremely wide margin of safety for the possible transmission of Zika by a donation obtained from someone who recently returned from a country where the virus is circulating. © 2017 AABB.

Efficacy and Safety of a Lidocaine and Ropivacaine Mixture for Scalp Nerve Block and Local Infiltration Anesthesia in Patients Undergoing Awake Craniotomy.

PubMed

Chaki, Tomohiro; Sugino, Shigekazu; Janicki, Piotr K; Ishioka, Yoshiya; Hatakeyama, Yosuke; Hayase, Tomo; Kaneuchi-Yamashita, Miki; Kohri, Naonori; Yamakage, Michiaki

2016-01-01

Mixtures of various local anesthetics, such as lidocaine and ropivacaine, have been widely used. However, their efficacy and safety for scalp nerve blocks and local infiltration during awake craniotomy have not been fully elucidated. We prospectively investigated 53 patients who underwent awake craniotomy. Scalp block was performed for the blockade of the supraorbital, supratrochlear, zygomaticotemporal, auriculotemporal, greater occipital, and lesser occipital nerves with a mixture containing equal volumes of 2% lidocaine and 0.75% ropivacaine, including 5 μg/mL of epinephrine. Infiltration anesthesia was applied at the site of skin incision using the same mixture. The study outcomes included changes in heart rate and blood pressure after head pinning and skin incision, and incidence of severe pain on emergence from anesthesia. Total doses and plasma concentrations of lidocaine and ropivacaine were measured at different time points after performing the block. The heart rate and blood pressure after head pinning were marginally, but significantly, increased when compared with baseline values. There were no significant differences in heart rate and blood pressure before and after the skin incision. Nineteen percent of the patients (10/53) complained of incisional pain at emergence from anesthesia. The highest observed blood concentrations of lidocaine and ropivacaine were 1.9±0.9 and 1.1±0.4 μg/mL, respectively. No acute anesthetic toxicity symptom was observed. Scalp block with a mixture of lidocaine and ropivacaine seems to provide effective and safe anesthetic management in patients undergoing awake craniotomy.

Skin absorption and human exposure estimation of three widely discussed UV filters in sunscreens--In vitro study mimicking real-life consumer habits.

PubMed

Klimová, Z; Hojerová, J; Beránková, M

2015-09-01

Due to health concerns about safety, three UV-filters (Benzophenone-3, BP3, 10%; Ethylhexyl Methoxycinnamate, EHMC, 10%; Butyl Methoxydibenzoylmethane, BMDBM; 5%) were examined in vitro for absorption on full-thickness pig-ear skin, mimicking human in-use conditions. Kinetic profiles confirmed the rapid permeation of BP3; after the first hour of skin (frozen-stored) exposure to 2 mg/cm(2) (W/O sunscreen; recommended but unrealistic amount), about 0.5% of the applied dose passed into the receptor fluid. The absorption rate of filters was higher from W/O than from O/W emulsions. The fresh/frozen-stored skin permeability coefficient (0.83-0.54) for each UV filter was taken into account. Systemic Exposure Dosage of BP3, EHMC, BMDBM for humans as a consequence of (i) whole-body and (ii) face treatment with 0.5 mg/cm(2) of W/O sunscreen for 6-h skin exposure followed by washing and subsequent 18-h permeation (a realistic scenario) were estimated to be (i) 4744, 1032 and 1036 μg/kg-bw/day, and (ii) 153, 33 and 34 μg/kg-bw/day, respectively. From Margin of Safety for BP3, EHMC and BMDBM (i) 42, 485 and 192 as well as (ii) 1307; 15,151 and 5882, respectively, only the value of 42 (<100) for BP3 indicated a possible health risk. Escalation of a phobia towards all organic UV filters is undesirable. Copyright © 2015 Elsevier Ltd. All rights reserved.

Estimated daily intake and safety of FD&C food-colour additives in the US population.

PubMed

Bastaki, Maria; Farrell, Thomas; Bhusari, Sachin; Bi, Xiaoyu; Scrafford, Carolyn

2017-06-01

A refined exposure assessment was undertaken to calculate the estimated daily intake (EDI) of the seven FD&C straight-colour additives and five FD&C colour lakes ('synthetic' food colours) approved in the United States. The EDIs were calculated for the US population as a whole and specific age groups, including children aged 2-5 and 6-12 years, adolescents aged 13-18 years, and adults aged 19 or more y. Actual use data were collected from an industry survey of companies that are users of these colour additives in a variety of products, with additional input from food colour manufacturers. Food-consumption data were obtained from the National Health and Nutrition Examination Survey (NHANES). The assessment was further refined by adjusting the intake to more realistic scenarios based on the fraction of products containing colour within specific food categories using data provided by the Mintel International Group Ltd. The results of the analysis indicate that (1) the use levels reported by the industry are consistent with the concentrations measured analytically by the US Food and Drug Administration; and (2) exposure to food-colour additives in the United States by average and high-intake consumers is well below the acceptable daily intake (ADI) of each colour additive as published by the Joint WHO/FAO Committee on Food Additives (JECFA) and allows wide margins of safety. It is concluded that food colour use as currently practised in the United States is safe and does not result in excessive exposure to the population, even at conservative ranges of food consumption and levels of use.

'En face' ex vivo reflectance confocal microscopy to help the surgery of basal cell carcinoma of the eyelid.

PubMed

Espinasse, Marine; Cinotti, Elisa; Grivet, Damien; Labeille, Bruno; Prade, Virginie; Douchet, Catherine; Cambazard, Frédéric; Thuret, Gilles; Gain, Philippe; Perrot, Jean Luc

2017-07-01

Ex vivo confocal microscopy is a recent imaging technique for the perioperative control of skin tumour margins. Up to date, it has been used in the fluorescence mode and with vertical sections of the specimen margins. The aim of this study was to evaluate its use in the reflectance mode and with a horizontal ('en face') scanning of the surgical specimen in a series of basal cell carcinoma of the eyelid. Prospective consecutive cohort study was performed at the University Hospital of Saint-Etienne, France. Forty-one patients with 42 basal cell carcinoma of the eyelid participated in this study. Basal cell carcinomas were excised with a 2-mm-wide clinically safe margin. The surgical specimens were analysed under ex vivo confocal microscopy in the reflectance mode and with an en face scanning in order to control at a microscopic level if the margins were free from tumour invasion. Histopathogical examination was later performed in order to compare the results. Sensitivity and specificity of ex vivo confocal microscopy for the presence of tumour-free margins. Ex vivo confocal microscopy results were consistent with histopathology in all cases (tumour-free margins in 40 out of 42 samples; sensitivity and specificity of 100%). Ex vivo confocal microscopy in the reflectance mode with an 'en face' scanning can control tumour margins of eyelid basal cell carcinomas and optimize their surgical management. This procedure has the advantage on the fluorescent mode of not needing any contrast agent to examine the samples. © 2016 Royal Australian and New Zealand College of Ophthalmologists.

Brittleness index of machinable dental materials and its relation to the marginal chipping factor.

PubMed

Tsitrou, Effrosyni A; Northeast, Simon E; van Noort, Richard

2007-12-01

The machinability of a material can be measured with the calculation of its brittleness index (BI). It is possible that different materials with different BI could produce restorations with varied marginal integrity. The degree of marginal chipping of a milled restoration can be estimated by the calculation of the marginal chipping factor (CF). The aim of this study is to investigate any possible correlation between the BI of machinable dental materials and the CF of the final restorations. The CEREC system was used to mill a wide range of materials used with that system; namely the Paradigm MZ100 (3M/ESPE), Vita Mark II (VITA), ProCAD (Ivoclar-Vivadent) and IPS e.max CAD (Ivoclar-Vivadent). A Vickers Hardness Tester was used for the calculation of BI, while for the calculation of CF the percentage of marginal chipping of crowns prepared with bevelled marginal angulations was estimated. The results of this study showed that Paradigm MZ100 had the lowest BI and CF, while IPS e.max CAD demonstrated the highest BI and CF. Vita Mark II and ProCAD had similar BI and CF and were lying between the above materials. Statistical analysis of the results showed that there is a perfect positive correlation between BI and CF for all the materials. The BI and CF could be both regarded as indicators of a material's machinability. Within the limitations of this study it was shown that as the BI increases so does the potential for marginal chipping, indicating that the BI of a material can be used as a predictor of the CF.

Switchgrass cultivars alter microbial contribution to deep soil C

USDA-ARS?s Scientific Manuscript database

Switchgrass (Panicum virgatum L.) is a perennial, cellulosic biofuel feedstock capable of growing under a wide variety of climatic conditions on land marginally suited to cultivated crops. Due to its perennial nature and deep rooting characteristics, switchgrass contributes to soil C sequestration ...

Robust non-parametric one-sample tests for the analysis of recurrent events.

PubMed

Rebora, Paola; Galimberti, Stefania; Valsecchi, Maria Grazia

2010-12-30

One-sample non-parametric tests are proposed here for inference on recurring events. The focus is on the marginal mean function of events and the basis for inference is the standardized distance between the observed and the expected number of events under a specified reference rate. Different weights are considered in order to account for various types of alternative hypotheses on the mean function of the recurrent events process. A robust version and a stratified version of the test are also proposed. The performance of these tests was investigated through simulation studies under various underlying event generation processes, such as homogeneous and nonhomogeneous Poisson processes, autoregressive and renewal processes, with and without frailty effects. The robust versions of the test have been shown to be suitable in a wide variety of event generating processes. The motivating context is a study on gene therapy in a very rare immunodeficiency in children, where a major end-point is the recurrence of severe infections. Robust non-parametric one-sample tests for recurrent events can be useful to assess efficacy and especially safety in non-randomized studies or in epidemiological studies for comparison with a standard population. Copyright © 2010 John Wiley & Sons, Ltd.

Acute poisoning with emamectin benzoate.

PubMed

Yen, Tzung-Hai; Lin, Ja-Liang

2004-01-01

Emamectin benzoate is the 4'-deoxy-4'-epi-methyl-amino benzoate salt of avermectin B1 (abamectin), which is similar structurally to natural fermentation products of Streptomyces avermitilis. Emamectin benzoate is being developed as a newer broad-spectrum insecticide for vegetables and has a very low application rate. The mechanism of action involves stimulation of high-affinity GABA receptors and a consequent increase in membrane chloride ion permeability. Animal studies indicate a wide margin of safety because mammalian species are much less sensitive due to lower GABA receptor affinities and relative impermeability of the blood-brain barrier. Notably, the literature has not reported human exposure resulting in toxicity. This paper describes a case of acute poisoning with Proclaim insecticide (Syngenta, Taiwan), consisting of 2.15% w/w emamectin benzoate in 2, 6-bis (1, 1-dimethylethyl)-4-methyl-phenol and 1-hexanol. The clinical manifestation was transient gastrointestinal upset with endoscopy-proven gastric erosion and superficial gastritis, mild central nervous system depression, and aspiration pneumonia. No specific antidote exists for emamectin benzoate intoxication; this patient was treated successfully with gastric lavage, administration of activated charcoal, and empiric antibiotics. Drugs that enhance GABA activity such as barbiturates and benzodiazepines were avoided.

Digitalis metabolism and human liver alcohol dehydrogenase.

PubMed Central

Frey, W A; Vallee, B L

1980-01-01

Human liver alcohol dehydrogenase (alcohol: NAD" oxidoreductase, EC 1.1.1.1) catalyzes the oxidation of the 3 beta-OH group of digitoxigenin, digoxigenin, and gitoxigenin to their 3-keto derivatives, which have been characterized by high performance liquid chromatography and mass spectrometry. These studies have identified human liver alcohol dehydrogenase as the unknown NAD(H)-dependent liver enzyme specific for the free hydroxyl group at C3 of the cardiac genins; this hydroxyl is the critical site of the genins' enzymatic oxidation and concomitant pharmacological inactivation in humans. Several kinetic approaches have demonstrated that ethanol and the pharmacologically active components of the digitalis glycosides are oxidized with closely similar kcat/Km values at the same site on human liver alcohol dehydrogenase, for which they compete. Human liver alcohol dehydrogenase thereby becomes an important biochemical link in the metabolism, pharmacology, and toxicology of ethanol and these glycosides, structurally unrelated agents that are both used widely. Both the competition of ethanol with these cardiac sterols and the narrow margin of safety in the therapeutic use of digitalis derivatives would seem to place at increased risk those individuals who receive digitalis and simultaneously consume large amounts of ethanol or whose alcohol dehydrogenase function is impaired. PMID:6987673

Heat penetration and thermocouple location in home canning.

PubMed

Etzel, Mark R; Willmore, Paola; Ingham, Barbara H

2015-01-01

We processed applesauce, tomato juice, and cranberries in pint jars in a boiling water canner to test thermal processing theories against home canning of high-acid foods. For each product, thermocouples were placed at various heights in the jar. Values for f h (heating), f cl (cooling), and F 82.2°C (lethality) were determined for each thermocouple location, and did not depend substantially on thermocouple location in accordance with heat transfer theory. There was a cold spot in the jar, but the cold spot during heating became the hot spot during cooling. During heating, the geometric center was the last to heat, and remained coldest the longest, but during coooling, it was also the last to cool, and remained hottest the longest. The net effect was that calculated lethality in home canning was not affected by thermocouple location. Most of the lethality during home canning occurred during air cooling, making cooling of home canned foods of great importance. Calculated lethality was far greater than the required 5-log reduction of spores in tomato juice and vegetative cells in cranberries, suggesting a wide margin of safety for approved home-canning processes for high-acid foods.

Heat penetration and thermocouple location in home canning

PubMed Central

Etzel, Mark R; Willmore, Paola; Ingham, Barbara H

2015-01-01

We processed applesauce, tomato juice, and cranberries in pint jars in a boiling water canner to test thermal processing theories against home canning of high-acid foods. For each product, thermocouples were placed at various heights in the jar. Values for fh (heating), fcl (cooling), and F82.2°C (lethality) were determined for each thermocouple location, and did not depend substantially on thermocouple location in accordance with heat transfer theory. There was a cold spot in the jar, but the cold spot during heating became the hot spot during cooling. During heating, the geometric center was the last to heat, and remained coldest the longest, but during coooling, it was also the last to cool, and remained hottest the longest. The net effect was that calculated lethality in home canning was not affected by thermocouple location. Most of the lethality during home canning occurred during air cooling, making cooling of home canned foods of great importance. Calculated lethality was far greater than the required 5-log reduction of spores in tomato juice and vegetative cells in cranberries, suggesting a wide margin of safety for approved home-canning processes for high-acid foods. PMID:25649758

Hearing conservation practices in eight noisy industries

NASA Astrophysics Data System (ADS)

Daniell, William E.; Swan, Susan S.; Camp, Janice; Cohen, Martin; McDaniel, Mary M.; Stebbins, John; Leo, Robert

2005-04-01

This study evaluated noise exposures and hearing conservation practices at 76 companies in eight industries with high rates of workers' compensation claims for hearing loss. Nearly all companies had exposures that required a hearing conservation program, and more than half had exposures that required consideration of noise controls. The use of noise measurements and consideration of controls was low in all industries. The completeness of hearing conservation programs was strongly associated with the extent of exposure in an industry, although practices varied widely within industries. Most companies had substantial deficiencies. More than one-third did not conduct annual training, and training had shortcomings at many others. One-third had not conducted audiometry. Hearing protection was commonly underused. Reported use was highest at companies with relatively complete programs, and in industries where exposure was most prevalent and least intermittent. Many employees had difficulty estimating how often, and presumably when, their exposure was excessive. There is a need for new strategies to promote and maintain hearing conservation efforts in noisy industries. The industries with greatest margin for improvement are not the noisiest industries but those where exposure is moderate or intermittent. [Work supported by the National Institute for Occupational Safety and Health.

Monte Carlo Estimation of Absorbed Dose Distributions Obtained from Heterogeneous 106Ru Eye Plaques.

PubMed

Zaragoza, Francisco J; Eichmann, Marion; Flühs, Dirk; Sauerwein, Wolfgang; Brualla, Lorenzo

2017-09-01

The distribution of the emitter substance in 106 Ru eye plaques is usually assumed to be homogeneous for treatment planning purposes. However, this distribution is never homogeneous, and it widely differs from plaque to plaque due to manufacturing factors. By Monte Carlo simulation of radiation transport, we study the absorbed dose distribution obtained from the specific CCA1364 and CCB1256 106 Ru plaques, whose actual emitter distributions were measured. The idealized, homogeneous CCA and CCB plaques are also simulated. The largest discrepancy in depth dose distribution observed between the heterogeneous and the homogeneous plaques was 7.9 and 23.7% for the CCA and CCB plaques, respectively. In terms of isodose lines, the line referring to 100% of the reference dose penetrates 0.2 and 1.8 mm deeper in the case of heterogeneous CCA and CCB plaques, respectively, with respect to the homogeneous counterpart. The observed differences in absorbed dose distributions obtained from heterogeneous and homogeneous plaques are clinically irrelevant if the plaques are used with a lateral safety margin of at least 2 mm. However, these differences may be relevant if the plaques are used in eccentric positioning.

A week in the life of a travel clinic.

PubMed Central

Blair, D C

1997-01-01

International travel has increased enormously in recent years. With the greater movement of people have come increased encounters with a wide variety of diseases: malaria, dengue, cholera, typhoid fever, Ebola virus, and many more. The need for greater scope, consistency, and knowledgeability in pretravel health care to meet these challenges has been met by the emergence of the discipline of travel medicine. Travelers are well advised to become informed of the risks they face and to take steps to minimize those risks. After reviewing a traveler's medical history and a detailed itinerary, a travel medicine practitioner can offer expert advice on behavioral modifications, immunizations, and chemoprophylaxis regimens which will increase the traveler's margin of safety. The issues most frequently addressed in a travel clinic include treatment of traveler's diarrhea, malaria chemoprophylaxis, and immunizations, for hepatitis A, typhoid fever, tetanus/diphtheria, influenza, pneumococcus, hepatitis B, polio, meningococcus, measles, mumps, rubella, varicella, and rabies. Pretravel consultation must consider the age and underlying health problems of the traveler, the nature of the trip (wilderness, jungle, rural, urban, resort, or cruise), the duration of travel, and the latest available information on the site in terms of disease outbreaks, terrorism, and natural calamities. PMID:9336667

New insights into the endocrine disrupting effects of brominated flame retardants.

PubMed

Legler, Juliette

2008-09-01

The objective of this review is to provide an overview of recent studies demonstrating the endocrine disrupting (ED) effects of brominated flame retardants (BFRs), while highlighting interesting data presented at the recent international BFR workshop in Amsterdam in April, 2007. A review written in 2002 was used as a starting point and about 60 publications published since 2003 were reviewed. New insights into the in vivo effects of BFRs on thyroid hormone, estrogen and androgen pathways in both mammalian and non-mammalian models are provided, and novel (in vitro) findings on the mechanisms underlying ED effects are highlighted. Special attention is also given to reports on neurotoxicological effects at relatively low doses of BFRs, although an endocrine-related mechanism is disputable. Convincing evidence has been published showing that BFRs and importantly, BFR metabolites, have the potential to disrupt endocrine systems at multiple target sites. While some studies suggest a wide margin of safety between effect concentrations in rodent models and levels encountered in humans and the environment, other studies demonstrate that exposure to low doses relevant for humans and wildlife at critical time points in development can result in profound effects on both endocrine pathways and (neuro)development.

Electrically-induced muscle fatigue affects feedforward mechanisms of control.

PubMed

Monjo, F; Forestier, N

2015-08-01

To investigate the effects of focal muscle fatigue induced by electromyostimulation (EMS) on Anticipatory Postural Adjustments (APAs) during arm flexions performed at maximal velocity. Fifteen healthy subjects performed self-paced arm flexions at maximal velocity before and after the completion of fatiguing electromyostimulation programs involving the medial and anterior deltoids and aiming to degrade movement peak acceleration. APA timing and magnitude were measured using surface electromyography. Following muscle fatigue, despite a lower mechanical disturbance evidenced by significant decreased peak accelerations (-12%, p<.001), APAs remained unchanged as compared to control trials (p>.11 for all analyses). The fatigue signals evoked by externally-generated contractions seem to be gated by the Central Nervous System and result in postural strategy changes which aim to increase the postural safety margin. EMS is widely used in rehabilitation and training programs for its neuromuscular function-related benefits. However and from a motor control viewpoint, the present results show that the use of EMS can lead to acute inaccuracies in predictive motor control. We propose that clinicians should investigate the chronic and global effects of EMS on motor control. Copyright © 2014 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Piggyback transplantation with side-to-side cavocavostomy is an ideal technique for right split liver allograft implantation.

PubMed

Lerut, J; de Ville de Goyet, J; Donataccio, M; Reding, R; Otte, J B

1994-11-01

Split liver grafting has not gained wide acceptance mainly because of different vascular and biliary technical problems. A new technique of right split liver transplantation is described. The piggyback implantation technique, using wide side-to-side cavocavostomy overcomes problems encountered when sharing the superhepatic vena cava cuff between two livers and obtains optimal drainage of venous allograft outflow, thus avoiding extensive bleeding at the transection margin. This technique was successfully used in two adult recipients. Piggyback transplantation using wide side-to-side cavocavostomy allows easy and safe implantation of the right split liver allograft.

Elastic thickness estimates at northeast passive margin of North America and its implications

NASA Astrophysics Data System (ADS)

Kumar, R. T. Ratheesh; Maji, Tanmay K.; Kandpal, Suresh Ch; Sengupta, D.; Nair, Rajesh R.

2011-06-01

Global estimates of the elastic thickness (Te) of the structure of passive continental margins show wide and varying results owing to the use of different methodologies. Earlier estimates of the elastic thickness of the North Atlantic passive continental margins that used flexural modelling yielded a Te value of ~20-100 km. Here, we compare these estimates with the Te value obtained using orthonormalized Hermite multitaper recovered isostatic coherence functions. We discuss how Te is correlated with heat flow distribution and depth of necking. The E-W segment in the southern study region comprising Nova Scotia and the Southern Grand Banks show low Te values, while the zones comprising the NE-SW zones, viz., Western Greenland, Labrador, Orphan Basin and the Northern Grand Bank show comparatively high Te values. As expected, Te broadly reflects the depth of the 200-400°C isotherm below the weak surface sediment layer at the time of loading, and at the margins most of the loading occurred during rifting. We infer that these low Te measurements indicate Te frozen into the lithosphere. This could be due to the passive nature of the margin when the loads were emplaced during the continental break-up process at high temperature gradients.

The Forest Service Safety Survey: results from an employee-wide safety attitude survey

Treesearch

Vanessa R. Lane; Ken Cordell; Stanley J. Zarnoch; Gary T. Green; Neelam Poudyal; Susan Fox

2014-01-01

The Forest Service, U.S. Department of Agriculture launched a Safety Journey in 2011 aimed at elevating safety consciousness and practice in the Agency. All employees were required to attend an engagement session during the year to introduce them to the Safety Journey. In September, a survey was launched to help Forest Service leadership better understand employee...

Adjusting the Passing Scores for Gearing up for Safety: Production Agriculture Safety Training for Youth Curriculum Test Instruments

ERIC Educational Resources Information Center

Hoover, William Brian; French, Brian F.; Field, William E.; Tormoehlen, Roger L.

2012-01-01

Minimum passing scores for the Gearing Up for Safety: Production Agriculture Safety Training for Youth curriculum (Gearing Up for Safety) were set in 2006 with widely used and established procedures by efforts of subject matter experts (French, Breidenbach et al., 2007; French, Field, and Tormoehlen, 2006, 2007). While providing a research-based…

75 FR 66007 - Mark Edward Leyse; Mark Edward Leyse and Raymond Shadis, on Behalf of the New England Coalition...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-27

... cladding temperature in order to provide a necessary margin of safety in the event of a loss-of-coolant... confirming that we have received your comments, contact us directly at 301-415-1677. Hand-deliver comments to...-conservative in their peak cladding temperature limit of 2200 [deg]F, and that the Baker-Just and Cathcart...

Development Program for Field-Repairable/Expendable Main Rotor Blades

DTIC Science & Technology

1976-09-01

honeycomb aft 2, and it represents the most cost- core, and extruded aluminum alloy effective approach to a repairable trailing-edge spline (Reference...materials lend themselves to relatively inexpensive fabrication techniques, the questionable torsional stiffness of composite spars eliminated them...values of the fatigue strength of aluminum , the spline and aft doublers are predicted to have a negative margin of safety for infinite life. The

The application of measurement techniques to track flutter testing

NASA Technical Reports Server (NTRS)

Roglin, H. R.

1975-01-01

The application is discussed of measurement techniques to captive flight flutter tests at the Supersonic Naval Ordnance Research Track (SNORT), U. S. Naval Ordnance Test Station, China Lake, California. The high-speed track, by its ability to prove the validity of design and to accurately determine the actual margin of safety, offers a unique method of flutter testing for the aircraft design engineer.

Retention of stored water enables tropical tree saplings to survive extreme drought conditions.

PubMed

Wolfe, Brett T

2017-04-01

Trees generally maintain a small safety margin between the stem water potential (Ψstem) reached during seasonal droughts and the Ψstem associated with their mortality. This pattern may indicate that species face similar mortality risk during extreme droughts. However, if tree species vary in their ability to regulate Ψstem, then safety margins would poorly predict drought mortality. To explore variation among species in Ψstem regulation, I subjected potted saplings of six tropical tree species to extreme drought and compared their responses with well-watered plants and pretreatment reference plants. In the drought treatment, soil water potential reached <-10 MPa, yet three species, Bursera simaruba (L.) Sarg., Cavanillesia platanifolia (Bonpl.) Kunth and Cedrela odorata L. had 100% survival and maintained Ψstem near -1 MPa (i.e., desiccation-avoiding species). Three other species, Cojoba rufescens (Benth.) Britton and Rose, Genipa americana L. and Hymenaea courbaril L. had 50%, 0% and 25% survival, respectively, and survivors had Ψstem <-6 MPa (i.e., desiccation-susceptible species). The desiccation-avoiding species had lower relative water content (RWC) in all organs and tissues (root, stem, bark and xylem) in the drought treatment than in the reference plants (means 72.0-90.4% vs 86.9-97.9%), but the survivors of the desiccation-susceptible C. rufescens had much lower RWC in the drought treatment (44.5-72.1%). Among the reference plants, the desiccation-avoiding species had lower tissue density, leaf-mass fraction and lateral-root surface area (LRA) than the desiccation-susceptible species. Additionally, C. platanifolia and C. odorata had reduced LRA in the drought treatment, which may slow water loss into dry soil. Together, these results suggest that the ability to regulate Ψstem during extreme drought is associated with functional traits that favor retention of stored water and that safety margins during seasonal drought poorly predict survival during extreme drought. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

R&D Plan for RISMC Industry Application #1: ECCS/LOCA Cladding Acceptance Criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szilard, Ronaldo Henriques; Zhang, Hongbin; Epiney, Aaron Simon

The Nuclear Regulatory Commission (NRC) is finalizing a rulemaking change that would revise the requirements in 10 CFR 50.46. In the proposed new rulemaking, designated as 10 CFR 50.46c, the NRC proposes a fuel performance-based equivalent cladding reacted (ECR) criterion as a function of cladding hydrogen content before the accident (pre-transient) in order to include the effects of higher burnup on cladding performance as well as to address other technical issues. A loss of operational margin may result due to the more restrictive cladding embrittlement criteria. Initial and future compliance with the rule may significantly increase vendor workload and licenseemore » costs as a spectrum of fuel rod initial burnup states may need to be analyzed to demonstrate compliance. The Idaho National Laboratory (INL) has initiated a project, as part of the DOE Light Water Reactor Sustainability Program (LWRS), to develop analytical capabilities to support the industry in the transition to the new rule. This project is called the Industry Application 1 (IA1) within the Risk-Informed Safety Margin Characterization (RISMC) Pathway of LWRS. The general idea behind the initiative is the development of an Integrated Evaluation Model (IEM). The motivation is to develop a multiphysics framework to analyze how uncertainties are propagated across the stream of physical disciplines and data involved, as well as how risks are evaluated in a LOCA safety analysis as regulated under 10 CFR 50.46c. This IEM is called LOTUS which stands for LOCA Toolkit for US, and it represents the LWRS Program’s response to the proposed new rule making. The focus of this report is to complete an R&D plan to describe the demonstration of the LOCA/ECCS RISMC Industry Application # 1 using the advanced RISMC Toolkit and methodologies. This report includes the description and development plan for a RISMC LOCA tool that fully couples advanced MOOSE tools already in development in order to characterize and optimize plant safety and operational margins. Advanced MOOSE tools that are needed to complete this integrated evaluation model are: RAVEN, RELAP-7, BISON, and MAMMOTH.« less

Actively dewatering fluid-rich zones along the Costa Rica plate boundary fault

NASA Astrophysics Data System (ADS)

Bangs, N. L.; McIntosh, K. D.; Silver, E. A.; Kluesner, J. W.; Ranero, C. R.; von Huene, R.

2012-12-01

New 3D seismic reflection data reveal distinct evidence for active dewatering above a 12 km wide segment of the plate boundary fault within the Costa Rica subduction zone NW of the Osa Peninsula. In the spring of 2011 we acquired a 11 x 55 km 3D seismic reflection data set on the R/V Langseth using four 6,000 m streamers and two 3,300 in3 airgun arrays to examine the structure of the Costa Rica margin from the trench into the seismogenic zone. We can trace the plate-boundary interface from the trench across our entire survey to where the plate-boundary thrust lies > 10 km beneath the margin shelf. Approximately 20 km landward of the trench beneath the mid slope and at the updip edge of the seismogenic zone, a 12 km wide zone of the plate-boundary interface has a distinctly higher-amplitude seismic reflection than deeper or shallower segments of the fault. Directly above and potentially directly connected with this zone are high-amplitude, reversed-polarity fault-plane reflections that extend through the margin wedge and into overlying slope sediment cover. Within the slope cover, high-amplitude reversed-polarity reflections are common within the network of closely-spaced nearly vertical normal faults and several broadly spaced, more gently dipping thrust faults. These faults appear to be directing fluids vertically toward the seafloor, where numerous seafloor fluid flow indicators, such as pockmarks, mounds and ridges, and slope failure features, are distinct in multibeam and backscatter images. There are distinctly fewer seafloor and subsurface fluid flow indicators both updip and downdip of this zone. We believe these fluids come from a 12 km wide fluid-rich segment of the plate-boundary interface that is likely overpressured and has relatively low shear stress.

Crustal structure of the North Iberian continental margin from seismic refraction/wide-angle reflection profiles

NASA Astrophysics Data System (ADS)

Ruiz, M.; Díaz, J.; Pedreira, D.; Gallart, J.; Pulgar, J. A.

2017-10-01

The structure and geodynamics of the southern margin of the Bay of Biscay have been investigated from a set of 11 multichannel seismic reflection profiles, recorded also at wide angle offsets in an onshore-offshore network of 24 OBS/OBH and 46 land sites. This contribution focuses on the analysis of the wide-angle reflection/refraction data along representative profiles. The results document strong lateral variations of the crustal structure along the margin and provide an extensive test of the crustal models previously proposed for the northern part of the Iberian Peninsula. Offshore, the crust has a typical continental structure in the eastern tip of the bay, which disappears smoothly towards the NW to reach crustal thickness close to 10 km at the edge of the studied area ( 45°N, 6°W). The analysis of the velocity-depth profiles, altogether with additional information provided by the multichannel seismic data and magnetic surveys, led to the conclusion that the crust in this part of the bay should be interpreted as transitional from continental to oceanic. Typical oceanic crust has not been imaged in the investigated area. Onshore, the new results are in good agreement with previous results and document the indentation of the Bay of Biscay crust into the Iberian crust, forcing its subduction to the North. The interpreted profiles show that the extent of the southward indentation is not uniform, with an Alpine root less developed in the central and western sector of the Basque-Cantabrian Basin. N-S to NE-SW transfer structures seem to control those variations in the indentation degree.

Malignant Change in an Epidermal Cyst Over Gluteal Region

PubMed Central

Kshirsagar, Ashok Y; Sulhyan, Sanjitsingh R; Deshpande, Shradha; Jagtap, SV

2011-01-01

A 72-year-old male presented with a large ulceroproliferative lesion over left gluteal region. After histopathological confirmation of squamous cell carcinoma, the lesion was excised with wide margins. Further histopathological study of the excised specimen revealed the growth arising from an epidermal cyst. Malignant change is a rare, but wellknown complication occurring in an epidermal cyst. The mainstay of treatment consists of wide excision of cancerous lesion with primary reconstruction of the defect. PMID:21572684

Environmental determinants of radiolarian assemblages in the western Pacific since the last deglaciation

NASA Astrophysics Data System (ADS)

Hernández-Almeida, I.; Cortese, G.; Yu, P.-S.; Chen, M.-T.; Kucera, M.

2017-08-01

Radiolarians are a very diverse microzooplanktonic group, often distributed in regionally restricted assemblages and responding to specific environmental factors. These properties of radiolarian assemblages make the group more conducive for the development and application of basin-wide ecological models. Here we use a new surface sediment data set from the western Pacific to demonstrate that ecological patterns derived from basin-wide open-ocean data sets cannot be transferred on semirestricted marginal seas. The data set consists of 160 surface sediment samples from three tropical-subtropical regions (East China Sea, South China Sea, and western Pacific), combining 54 new assemblage counts with taxonomically harmonized data from previous studies. Multivariate statistical analyses indicate that winter sea surface temperature at 10 m depth (SSTw) was the most significant environmental variable affecting the composition of radiolarian assemblages, allowing the development of an optimal calibration model (Locally Weighted-Weighted Averaging regression inverse deshrinking, R2cv = 0.88, root-mean-square error of prediction = 1.6°C). The dominant effect of SSTw on radiolarian assemblage composition in the western Pacific is attributed to the East Asian Winter Monsoon (EAWM), which is particularly strong in the marginal seas. To test the applicability of the calibration model on fossil radiolarian assemblages from the marginal seas, the calibration model was applied to two downcore records from the Okinawa Trough, covering the last 18 ka. We observe that these assemblages find most appropriate analogs among modern samples from the marginal basins (East China Sea and South China Sea). Downcore temperature reconstructions at both sites show similarities to known regional SST reconstructions, providing proof of concept for the new radiolarian-based SSTw calibration model.

Crustal structure of the Ionian basin and eastern Sicily margin : results from a wide angle seismic survey and implication for the crustal nature and origin of the basin, and the recent tear fault location

NASA Astrophysics Data System (ADS)

Gutscher, M. A.; Dellong, D.; Klingelhoefer, F.; Kopp, H.; Graindorge, D.; Margheriti, L.; Moretti, M.

2017-12-01

In the Ionian Sea (Central Mediterranean) the slow convergence between Africa and Eurasia results in the formation of a narrow subduction zone. The nature of the crust and lithosphere of the subducting plate remain debated and could represent the last remnants of the Neo-Tethys ocean. The rifting mechanism that produced the Ionian basin are also still under discussion with the Malta escarpment representing a possible remnant of this opening. At present, this subduction is still retreating to the south-east (motion occurring since the last 35 Ma) but is confined to the narrow Ionian Basin. In order to accommodate slab roll-back, a major lateral slab tear fault is required. This fault is thought to propagate along the eastern Sicily margin but its precise location remains controversial. This study focuses on the deep crustal structure of the Eastern-Sicily margin and the Malta Escarpment by presenting two wide-angle velocity profiles crossing these structures roughly orthogonally. The data used for the forward velocity modeling were acquired onboard the R/V Meteor during the DIONYSUS cruise in 2014. The results image an oceanic crust within the Ionian basin as well as the deep structure of the Malta Escarpment which presents characteristics of a transform margin. A deep and asymmetrical sedimentary basin is imaged south of the Messina strait and seems to have opened in between the Calabrian and Peloritan continental terranes. The interpretation of the velocity models suggests that the tear fault is located east of the Malta Escarpment, along the Alfeo fault system.

The crustal structure of the southern Argentine margin

NASA Astrophysics Data System (ADS)

Becker, Katharina; Franke, Dieter; Schnabel, Michael; Schreckenberger, Bernd; Heyde, Ingo; Krawczyk, Charlotte M.

2012-06-01

Multichannel reflection seismic profiles, combined with gravimetric and magnetic data provide insight into the crustal structure of the southernmost Argentine margin, at the transition from a rifted to a transform margin and outline the extent of the North Falkland Graben. Based on these data, we establish a regional stratigraphic model for the post-rift sediments, comprising six marker horizons with a new formation in the Barremian/Lower Cretaceous. Our observations support that a N-S trending subsidiary branch of the North Falkland Graben continues along the continental shelf and slope to the Argentine basin. During the rift phase, a wide shelf area was affected by the E-W extension, subsequently forming the North Falkland Graben and the subsidiary branch along which finally breakup occurred. We propose the division of the margin in two segments: a N-S trending rifted margin and an E-W trending transform margin. This is further underpinned by crustal scale gravity modelling. Three different tectono-dynamic processes shaped the study area. (1) The Triassic/Early Jurassic extensional phase resulting in the formation of the North Falkland Graben and additional narrower rift grabens ended synchronously with the breakup of the South Atlantic in the early Valanginian. (2) Extensional phase related to the opening of the South Atlantic. (3) The transform margin was active in the study area from about Hauterivian times and activity lasted until late Cretaceous/early Cenozoic. Both, the rifted margin and the transform margin are magma-poor. Very limited structures may have a volcanic origin but are suggested to be post-rift. The oceanic crust was found to be unusually thin, indicating a deficit in magma supply during formation. These findings in combination with the proposed breakup age in the early Valanginian that considerably predates the formation of the Paraná-Etendeka continental flood basalt provinces in Brazil and Namibia question the influence of the Tristan da Cunha hotspot during the initial formation of the South Atlantic.

Presurgical mapping of basal cell carcinoma or squamous cell carcinoma by confocal laser endomicroscopy compared to traditional micrographic surgery: a single-centre prospective feasibility study.

PubMed

Schulz, Alexandra; Daali, Samira; Javed, Mehreen; Fuchs, Paul Christian; Brockmann, Michael; Igressa, Alhadi; Charalampaki, Patra

2016-12-01

At present, no ideal diagnostic tools exist in the market to excise cancer tissue with the required safety margins and to achieve optimal aesthetic results using tissue-conserving techniques. In this prospective study, confocal laser endomicroscopy (CLE) and the traditional gold standard of magnifying glasses (MG) were compared regarding the boundaries of in vivo basal cell carcinoma and squamous cell carcinoma. Tumour diameters defined by both methods were measured and compared with those determined by histopathological examination. Nineteen patients were included in the study. The CLE technique was found to be superior to excisional margins based on MG only. Re-excision was required in 68% of the cases following excision based on MG evaluation, but only in 27% of the cases for whom excision margins were based on CLE. Our results are promising regarding the distinction between tumour and healthy surrounding tissue, and indicate that presurgical mapping of basal cell carcinoma and squamous cell carcinoma is possible. The tool itself should be developed further with special attention to early detection of skin cancer.

Ramsey waits: allocating public health service resources when there is rationing by waiting.

PubMed

Gravelle, Hugh; Siciliani, Luigi

2008-09-01

The optimal allocation of a public health care budget across treatments must take account of the way in which care is rationed within treatments since this will affect their marginal value. We investigate the optimal allocation rules for public health care systems where user charges are fixed and care is rationed by waiting. The optimal waiting time is higher for treatments with demands more elastic to waiting time, higher costs, lower charges, smaller marginal welfare loss from waiting by treated patients, and smaller marginal welfare losses from under-consumption of care. The results hold for a wide range of welfarist and non-welfarist objective functions and for systems in which there is also a private health care sector. They imply that allocation rules based purely on cost effectiveness ratios are suboptimal because they assume that there is no rationing within treatments.