Sample records for wood processing industry

  1. Efficiency analysis of wood processing industry in China during 2006-2015

    NASA Astrophysics Data System (ADS)

    Zhang, Kun; Yuan, Baolong; Li, Yanxuan

    2018-03-01

    The wood processing industry is an important industry which affects the national economy and social development. The data envelopment analysis model (DEA) is a quantitative evaluation method for studying industrial efficiency. In this paper, the wood processing industry of 8 provinces in southern China is taken as the study object, and the efficiency of each province in 2006 to 2015 was measured and calculated with the DEA method, and the efficiency changes, technological changes and Malmquist index were analyzed dynamically. The empirical results show that there is a widening gap in the efficiency of wood processing industry of the 8 provinces, and the technological progress has shown a lag in the promotion of wood processing industry. According to the research conclusion, along with the situation of domestic and foreign wood processing industry development, the government must introduce relevant policies to strengthen the construction of the wood processing industry technology innovation policy system and the industrial coordinated development system.

  2. Wood Technology: Techniques, Processes, and Products

    ERIC Educational Resources Information Center

    Oatman, Olan

    1975-01-01

    Seven areas of wood technology illustrates applicable techniques, processes, and products for an industrial arts woodworking curriculum. They are: wood lamination; PEG (polyethylene glycol) diffusion processes; wood flour and/or particle molding; production product of industry; WPC (wood-plastic-composition) process; residential construction; and…

  3. A system for classifying wood-using industries and recording statistics for automatic data processing.

    Treesearch

    E.W. Fobes; R.W. Rowe

    1968-01-01

    A system for classifying wood-using industries and recording pertinent statistics for automatic data processing is described. Forms and coding instructions for recording data of primary processing plants are included.

  4. The use and market for wood in the electrometallurgical industry

    Treesearch

    Jeffery L. Wartluft; Jeffery L. Wartluft

    1971-01-01

    Wood residues, particularly large chips, play an important role in the electric smelting of certain ferro-alloys. This is a report on the characteristics and growth potential of the market for wood in the electrometallurgicaI industry, including a brief account of how wood is used in electrometallurgical processes, a discussion of the preferred form of wood used, a...

  5. Risks for respiratory and gastric cancer in wood-working occupations in Denmark.

    PubMed

    Olsen, J H; Møller, H; Jensen, O M

    1988-01-01

    Cases of cancer notified to the Danish Cancer Registry during the period 1970 to 1984 in the age groups 16 to 66 years have been linked to information on employment kept on file in the nationwide Supplementary Pension Fund since 1964. Industrial hygienists classified industrial groups as defined by the Pension Fund with regard to exposure to wood dust, and a list of industries with major exposure to wood dust was defined. The risk for cancer of the respiratory system and the gastrointestinal tract was evaluated by means of a proportional cancer incidence analysis. A fourfold increase in risk for sinonasal cancer was found among men involved in the manufacture of wooden furniture, and a twofold increase in risk for gastric cancer was seen in all of the component industries of basic wood-processing. In contrast, no excess of gastric cancer could be detected in men working in the manufacture of wooden building materials and wooden furniture, and a risk below unity was seen for those in carpentry and joinery. The elevated risk for gastric cancer in some wood-processing industries is probably due to social factors also common to men in agriculture and manufacturing. The absence of an increased risk for gastric cancer in trades in which a high risk for sinonasal cancer is seen indicates that wood dust is not of aetiological importance for gastric cancer. No excess of total lung cancer or of the adenocarcinoma subtype was seen in any of the wood-processing industries.

  6. West Virginia timber industry: an assessment of timber product output and use, 2007

    Treesearch

    Ronald J. Piva; Gregory W. Cook

    2011-01-01

    In 2007, there were 116 primary wood-processing mills in West Virginia, 60 fewer mills than in 2000. These mills processed 172.9 million cubic feet of industrial roundwood, of which 138.8 million cubic feet was harvested from the State. Another 50.5 million cubic feet of the industrial roundwood harvested in West Virginia was sent to primary wood-processing mills in...

  7. On the Process and Consequences of Job Rationing in Oregon's Declining Wood Products Industry. WRDC Discussion Paper No. 4.

    ERIC Educational Resources Information Center

    Stevens, Joe B.; And Others

    The study of the mobility of the wood products labor force was made in response to a predicted decline in manpower needs for the wood products industry in western Oregon and western Washington. Variables affecting workers' employability and mobility were analyzed to determine the potential in Oregon for mobility within and out of the industry, the…

  8. Ohio roundwood utilization by the timber industry in 2006

    Treesearch

    Jan Wiedenbeck; Andy Sabula

    2008-01-01

    To identify changes in the structure, size, and wood raw material inputs of the primary wood processing industry in Ohio, the Ohio Division of Forestry and the U.S. Forest Service conduct a periodic survey of this sector. The current assessment of the state of the primary wood products industry in Ohio is based on information collected for the period 2003 through 2006...

  9. Use of lasers in the furniture industry

    NASA Astrophysics Data System (ADS)

    Wieloch, Grzegorz; Pohl, Piotr

    1995-03-01

    One of the ways of using laser in industry is its usage in loss treatment of wood and composite wood products. In the furniture industry the above mentioned machining is used in such technological processes in which tool machining (sawing, molding) is not economical or even possible. These processes are mainly curvilinear cutting of layer materials like veneers, plywood, and face layers and thicker materials like particleboards, fiberboards, and lumber- core panels. Wide usage has also been achieved in heat treatment in wood for decoration. It can be calcinating designs, engraving them, blackening of parts of surfaces, or changing of anatomic characteristics of wood tissue. Nevertheless laser usage in recliner cutting seems at present causeless.

  10. CHARACTERIZATION OF MANUFACTURING PROCESSES AND EMISSIONS AND POLLUTION PREVENTION OPTIONS FOR THE COMPOSITE WOOD INDUSTRY

    EPA Science Inventory

    The report summarizes information gathered on emissions from the composite wood industry (also called the Plywood and particleboard industry) and potential pollution prevention options. Information was gathered during a literature search that included trade association publicatio...

  11. A survey into process and worker's characteristics in the wood furniture industry in Songkhla Province, southern region of Thailand.

    PubMed

    Tuntiseranee, P; Chongsuvivatwong, V

    1998-12-01

    A cross-sectional survey of the wood furniture industry was conducted in southern Thailand in February 1993. The aim was to examine the manufacturing process, occupational hazards at the workplace, workers' demographic characteristics, period of employment, incidence rate of work related injury and some reproductive history of workers. Altogether 69 managers and 1,000 workers participated in the study. There are 2 main types of wood industry, rubberwood and hardwood. The rubberwood industry is semi-automated with advanced technology, has a female-dominated workforce of 200-300 workers per factory and overseas-market orientation. The hardwood industry is based in small-scale workplaces ranging from 20 to 60 workers, domestic-market orientation and has a male-dominated workforce. Most of the workers were young, single, of low education and were high turnover rate laborforce, with arduous work and long working hours per week. Solvent was the most frequent chemical exposure. The person-year incidence of chemical exposure in female workers was higher than in male workers for every group of chemicals. The incidence of accidents was twice as high as the official rate. The standardized fertility ratio of female wood workers was only 51.6% of that of the Thai female population. There was a high abortion rate among women who became pregnant inside the wood industry compared to that among pregnancies outside the wood factory. Wood industry workers were exposed to occupational hazards and accident-prone work conditions.

  12. A survey of size-fractionated dust levels in the U.S. wood processing industry.

    PubMed

    Kalliny, Medhat I; Brisolara, Joseph A; Glindmeyer, Henry; Rando, Roy

    2008-08-01

    A survey of size-fractionated dust exposure was carried out in 10 wood processing plants across the United States as part of a 5-year longitudinal respiratory health study. The facilities included a sawmill, plywood assembly plants, secondary wood milling operations, and factories producing finished wood products such as wood furniture and cabinets. Size-fractionated dust exposures were determined using the RespiCon Personal Particle Sampler. There were 2430 valid sets of respirable, thoracic, and inhalable dust samples collected. Overall, geometric mean (geometric standard deviation) exposure levels were found to be 1.44 (2.67), 0.35 (2.65), and 0.18 (2.54) mg/m, for the inhalable, thoracic, and respirable fractions, respectively. Averaged across all samples, the respirable fraction accounted for 16.7% of the inhalable dust mass, whereas the corresponding figure for thoracic fraction as a percentage of the inhalable fraction was 28.7%. Exposures in the furniture manufacturing plants were significantly higher than those in sawmill and plywood assembly plants, wood milling plants, and cabinet manufacturing plants, whereas the sawmill and plywood assembly plants exhibited significantly lower dust levels than the other industry segments. Among work activities, cleaning with compressed air and sanding processes produced the highest size-fractionated dust exposures, whereas forklift drivers demonstrated the lowest respirable and inhalable dust fractions and shipping processes produced the lowest thoracic dust fraction. Other common work activities such as sawing, milling, and clamping exhibited intermediate exposure levels, but there were significant differences in relative ranking of these across the various industry segments. Processing of hardwood and mixed woods generally were associated with higher exposures than were softwood and plywood, although these results were confounded with industry segment also.

  13. Electron treatment of wood pulp for the viscose process

    NASA Astrophysics Data System (ADS)

    Stepanik, T. M.; Ewing, D. E.; Whitehouse, R.

    2000-03-01

    Electron processing is currently being evaluated by several viscose producers for integration into their process. The viscose industry converts dissolving wood pulp into products such as staple fibre, filament, cord, film, packaging, and non-edible sausage casings. These materials are used in the clothing, drapery, hygiene, automobile, food, and packaging industries. Viscose producers are facing increasingly high production costs and stringent environmental regulations that have forced some plants to close. Electron treatment of wood pulp can significantly reduce the amounts of chemicals used for producing viscose and the production of hazardous pollutants. Acsion Industries has worked with companies worldwide to demonstrate the benefits of using electron treated pulp for producing viscose (rayon). This paper describes the viscose process, the benefits of using electron treatment in the viscose process, and Acsion's efforts in developing this technology.

  14. Ergonomics and safety in secondary wood processing

    Treesearch

    Rado Gazo; James D. McGlothlin; Yuehwern, Wiedenbeck, Jan Yih; Yuehwern Yih

    2002-01-01

    The main goal of the project was to initiate a pilot program in ergonomics for the secondary wood products industry. Case studies were conducted at three Midwest secondary wood product companies in 2000 and 2001.

  15. Small enterprises' importance to the U.S. secondary wood processing industry

    Treesearch

    Urs Buehlmann; Omar Espinoza; Matthew Bumgardner; Michael Sperber

    2013-01-01

    The past decades have seen numerous U.S. secondary wood processing companies shift their production to overseas locations, mainly in Southeast Asia. The remaining companies have been hit hard by the downturn in housing markets and the following recession. Thus, many large customers of the U.S. hardwood lumber industry have reduced or stopped the purchase of products,...

  16. Chapter 8: Acoustic Assessment of Wood Quality in Trees and Logs

    Treesearch

    Xiping Wang; Peter Carter

    2015-01-01

    Assessing the quality of raw wood materials has become a crucial issue in the operational value chain as forestry and the wood processing industry are increasingly under economic pressure to maximize extracted value. A significant effort has been devoted toward developing robust nondestructive evaluation (NDE) technologies capable of predicting the intrinsic wood...

  17. Woodworking Technology.

    ERIC Educational Resources Information Center

    Kirk, Albert S.; And Others

    1991-01-01

    Three articles discuss the importance of wood processing to manufacturing and construction industries and the need for progressive change in the curriculum; the evolution of wood-based synthetic panel materials; and the technological advances in the computer control of machine tools and their incorporation into wood technology curricula. (JOW)

  18. Wood industrial application for quality control using image processing

    NASA Astrophysics Data System (ADS)

    Ferreira, M. J. O.; Neves, J. A. C.

    1994-11-01

    This paper describes an application of image processing for the furniture industry. It uses an input data, images acquired directly from wood planks where defects were previously marked by an operator. A set of image processing algorithms separates and codes each defect and detects a polygonal approach of the line representing them. For such a purpose we developed a pattern classification algorithm and a new technique of segmenting defects by carving the convex hull of the binary shape representing each isolated defect.

  19. Acoustic assessment of wood quality of raw forest materials : a path to increased profitability

    Treesearch

    Xiping Wang; Peter Carter; Robert J. Ross; Brian K. Brashaw

    2007-01-01

    Assessment of the quality of raw wood materials has become a crucial issue in the operational value chain as forestry and the wood processing industry are increasingly under economic pressure to maximize extracted value. A significant effort has been devoted toward developing robust nondestructive evaluation (NDE) technologies capable of predicting the intrinsic wood...

  20. Guide to investment and trade in the forest-product sectors of Southeast Asia: Indonesia, Malaysia, and the Philippines. Working paper

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Krutilia, K.

    1988-01-01

    Declining timber resources, an increase in value-added wood-base processing, new export markets, and a growing stress on joint ventures have been key factors in the rapid evolution since 1975 of Southeast Asia's forest products industry. The report profiles the industry and its prospects in Indonesia, the Philippines, and Malaysia, each of which differs with respect to stage of wood-industry development and investment climate. The countries' forest management policies, timber resources, and the status of their wood-based processing industries are reviewed first, followed by an overview of the business environment in each country, the latter covering policies toward foreign investment (includingmore » the increasingly important investments from other less-developed countries), investment licensing and regulation, taxation, exporting/importing regulations, and policies governing currency and capital controls. Includes a 5-page list of references and a short annotated bibliography.« less

  1. Combustion characteristics of lodge pole pine wood chips. Technical progress report No. 15, September 16, 1978-September 15, 1979

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Junge, D.C.

    1979-09-01

    Significant quantits of wood resiue fuels are presently being used in industrial steam generating facilities. Recent studies indicate that substantial additional quantities of wood residue fuels are available for energy generation in the form of steam and/or electricity. A limited data base on the combustion characteristics of wood residue fuels has resulted in the installation and operation of inefficient combustion systems for these fuels. This investigation of the combustion characteristics of wood residue fuels was undertaken to provide a data base which could be used to optimize the combustion of such fuels. Optimization of the combustion process in industrial boilersmore » serves to improve combustion efficiency and to reduce air pollutant emissions generated in the combustion process. This report presents data on the combustion characteristics of lodge pole pine wood chips. The data were obtained in a pilot scale combustion test facility at Oregon State University.« less

  2. Uses for Sawdust, Shavings, And Waste Chips

    Treesearch

    J. M. Harkin

    1969-01-01

    Although many outlets are available for the utilization of wood fines, economical disposal of sawdust, shavings, and waste chips remains a problem of growing concern to the wood industry. This report summarizes current uses for wood residues and provides sources of further information on available outlets, processing methods, and economic considerations.

  3. Underestimation of terpene exposure in the Nordic wood industry.

    PubMed

    Granström, Karin M

    2010-03-01

    This study determined that emission of sesquiterpenes from processed wood warrants attention in the work environment. Currently, only the monoterpenes in the terpene group are monitored in occupational hygiene studies. Terpene emissions are a work environment issue for industries that process wood, as they are known to cause respiratory difficulties and mucous membrane irritation. Fresh sawdust of the most common boreal conifers, Norway spruce (Picea abies) and Scots pine (Pinus sylvestris), was subjected to processing (drying), and the emissions were analyzed with a gas chromatograph-mass spectrometer. The data indicate that workers are exposed to significant amounts of sesquiterpenes, an observation that has not been recorded previously at wood processing plants. On average, the proportion of sesquiterpenes to monoterpenes was 21 +/- 5% (STD, n = 11) for spruce and 15 +/- 5% (STD, n = 13) for pine. The composition of terpenes emitted in air from spruce wood differs from the composition in resin. The sum of monoterpenes and sesquiterpenes can exceed the occupational exposure limit for turpentine for processes where monoterpene concentrations are already close to the occupational exposure limit, and for processes involving the processing of bark. Findings suggest that future studies of health effects from terpenes in air should measure monoterpenes and sesquiterpenes to assess whether the current OELs are appropriate.

  4. Comparative evaluation of different thermally modified wood samples finishing with UV-curable and waterborne coatings

    NASA Astrophysics Data System (ADS)

    Herrera, René; Muszyńska, Monika; Krystofiak, Tomasz; Labidi, Jalel

    2015-12-01

    Thermally modified wood has been developed as an industrial method to improve durability and dimensional stability of wood and thus extends the range of uses and service life of wood-based products. Despite the improvements gained by treatment, surface finishing using coatings prevents esthetical changes such as color degradation or occasional growth of mold adding protection in outdoor use and extending the service life of products. The wood finishing process was carried out with commercially available waterborne and UV-curable coatings on industrially modified at 192, 200, 212 °C and unmodified European ash (Fraxinus excelsior L.) wood, using an industrial rollers system and a laboratory brushing system. Changes caused by thermal treatment which could affect the surface finish were measured and compared with control samples, such as water uptake, wettability and acidity. Following the wood finishing, surface properties and esthetic changes were evaluated; as well as the coatings performance. Thermally modified wood presented improved adherence compared with unmodified wood with a significant improvement in samples modified at 212 °C, which also present the highest hardness when UV-cured. Finishes with UV-curing maintain the hydrophobic effect of thermally modified wood, whereas waterborne finishes increase the surface wettability. Thermal modification did not negatively influence on the elastic properties of the coated substrate and thus allows this material to be finished with different coating systems in the same conditions as unmodified wood.

  5. California’s forest products industry and timber harvest, 2006

    Treesearch

    Todd A. Morgan; Jason P. Brandt; Kathleen E. Songster; Charles E. Keegan; Glenn A. Christensen

    2012-01-01

    This report traces the flow of California’s 2006 timber harvest through the primary wood products industry (i.e., firms that process timber into manufactured products such as lumber, as well as facilities such as pulp mills and particleboard plants, which use the wood fiber or mill residue directly from timber processors) and provides a description of the structure,...

  6. Pollution prevention in the pulp and paper industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jenkins, P.G.

    1995-09-01

    Probably no other industry has made as much progress as the kraft pulp and paper industry in reclaiming waste products. About half of the wood used in making pulp is cellulose; the reclamation of the other ingredients in the wood constitutes a continuing evolution of pollution prevention and economic success. The by-products of chemical pulping include turpentine used in the paint industry, lignosulfonates used as surfactants and dispersants, ``tall oil`` used in chemical manufacturing, yeast, vanillin, acetic acid, activated carbon, and alcohol. Sulfamic turpentine recovered in the kraft process is used to manufacture pine oil, dimethyl sulfoxide (DMSO), and othermore » useful chemical products. In addition, the noncellulose portion of the wood is used to provide energy for the pulping process through the combustion of concentrated black liquor. Over 75% of the pulp produced in the US is manufactured using the kraft process. Because of the predominance of the kraft process, the remainder of this section will address pollution prevention methods for kraft pulp and paper mills. Some of these techniques may be applicable or adaptable to other pulping processes, especially sulfite mills. The major steps in the kraft process are described, followed by a discussion of major wastestreams, and proven pollution prevention methods for each of these steps.« less

  7. Peter Koch: wizard of wood use

    Treesearch

    M.E. Lora

    1978-01-01

    Like his pioneer forefathers, Peter Koch sees opportunity where others see obstacles. And his vision is helping to reshape the wood industry. Since 1963 Koch has directed research on processing southern woods for the U.S. Forest Service's Southern Forest Experiment Station in Pineville, Louisiana. In that time, he has invented six revolutionary machines, developed...

  8. Image processing system for the measurement of timber truck loads

    NASA Astrophysics Data System (ADS)

    Carvalho, Fernando D.; Correia, Bento A. B.; Davies, Roger; Rodrigues, Fernando C.; Freitas, Jose C. A.

    1993-01-01

    The paper industry uses wood as its raw material. To know the quantity of wood in the pile of sawn tree trunks, every truck load entering the plant is measured to determine its volume. The objective of this procedure is to know the solid volume of wood stocked in the plant. Weighing the tree trunks has its own problems, due to their high capacity for absorbing water. Image processing techniques were used to evaluate the volume of a truck load of logs of wood. The system is based on a PC equipped with an image processing board using data flow processors. Three cameras allow image acquisition of the sides and rear of the truck. The lateral images contain information about the sectional area of the logs, and the rear image contains information about the length of the logs. The machine vision system and the implemented algorithms are described. The results being obtained with the industrial prototype that is now installed in a paper mill are also presented.

  9. Work environment risk factors for injuries in wood processing

    PubMed Central

    Holcroft, Christina A.; Punnett, Laura

    2018-01-01

    Problem The reported injury rate for wood product manufacturing in Maine, 1987–2004, was almost twice the state-wide average for all jobs. Method A case-control study was conducted in wood processing plants to determine preventable risk factors for injury. A total of 157 cases with injuries reported to workers’ compensation and 251 controls were interviewed. Results In multivariable analyses, variables associated with injury risk were high physical workload, machine-paced work or inability to take a break, lack of training, absence of a lockout/tagout program, low seniority, and male gender. Different subsets of these variables were significant when acute incidents and overexertions were analyzed separately and when all injuries were stratified by industry sub-sector. Impact on industry Generalizability may be limited somewhat by non-representative participation of workplaces and individuals. Nevertheless, these findings provide evidence that many workplace injuries occurring in wood processing could be prevented by application of ergonomics principles and improved work organization. PMID:19778648

  10. Combustion characteristics of eastern white pine bark and Douglas fir planer shavings. Technical Progress Report No. 5, September 16, 1977--September 15, 1978

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Junge, D.C.

    1978-12-01

    Significant quantities of wood residue fuels are presently being used in industrial steam generating facilities. Recent studies indicate that substantial additional quantities of wood residue fuels are available for energy generation in the form of steam and/or electricity. A limited data base on the combustion characteristics of wood residue fuels has resulted in the installation and operation of inefficient combustion systems for these fuels. This investigation of the combustion characteristics of wood residue fuels was undertaken to provide a data base which could be used to optimize the combustion of such fuels. Optimization of the combustion process in industrial boilersmore » serves to improve combustion efficiency and to reduce air pollutant emissions generated in the combustion process. Data are presented on the combustion characteristics of eastern white pine bark mixed with Douglas fir planer shavings.« less

  11. Evaluating the warping of laminated particleboard panels

    Treesearch

    Zhiyong Cai

    2004-01-01

    Laminated wood composites have been used widely in the secondary manufacturing processes in the wood panel industries. Warping, which is defined as the out-of-plane deformation of an initially flat panel, is a longstanding problem associated with the use of laminated wood composites. The mechanism of warping is still not fully understood. A new two- dimensional warping...

  12. Imports and exports of roundwood in the upper Midwestern United States. Chapter 2.

    Treesearch

    Charles H. Perry; Mark D. Nelson; Ronald J. Piva

    2010-01-01

    Industrial roundwood is the raw material produced from harvested trees that is used to manufacture a wide range of wood products. Roundwood is harvested from the forest and is transported to primary manufacturing facilities to be processed into primary and secondary wood products. Roundwood includes sawlogs that are processed into...

  13. Catalysis: A Potential Alternative to Kraft Pulping

    Treesearch

    Alan W. Rudie; Peter W. Hart

    2014-01-01

    A thorough analysis of the kraft pulping process makes it obvious why it has dominated for over a century as an industrial process with no replacement in sight. It uses low cost raw materials, collects and regenerates over 90% of the chemicals needed in the process, is indifferent to wood raw material and good at preserving the cellulose portion of the wood which is...

  14. Catalysis: A Potential Alternative to Kraft Pulping

    Treesearch

    Alan W. Rudie; Peter W. Hart

    2014-01-01

    A thorough analysis of the kraft pulping process makes it obvious why it has dominated for over a century as an industrial process with no replacement in sight. It uses low-cost raw materials; collects and regenerates over 90% of the chemicals needed in the process; and is indifferent to wood raw material and good at preserving the cellulose portion of the wood, the...

  15. [Medical certification in workers involved in logging and wood-processing].

    PubMed

    Romankow, Jacek

    2007-01-01

    Activities involved in forestry and woodworking industry are associated with workers being exposed to numerous environmental and technology-related factors that are detrimental to their health. Such hazards include working in changeable climatic conditions, in the vicinity of heavy equipment, exposure to noise, chainsaw vibrations, enforced body positioning, hard physical work, the effect of exhaust gases, potential effects of biological factors, including epizootic diseases. Wood processing involves performing mechanical activities employing tools and machines, as well as processes utilizing various chemical substances. Forestry and woodworking industry workers may deal both with timber and with wood products. In medical certification, the following issues are of significance: work in the vicinity of rotational elements, noise, effects of chemicals or biological factors, including carcinogenic substances. For this reason, the procedures involved in medical examinations of such workers are complex.

  16. Energy from wood biomass: The experience of the Brazilian forest sector

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Couto, L.; Graca, L.R.; Betters, D.R.

    Wood biomass is one of the most significant renewable sources of energy in Brazil. Fuelwood and charcoal play a very important role not only for household energy consumption but also for the cement, iron and steel industries. Wood is used as an energy source by the pulp and paper, composite board and other industries of the country, mainly for steam and electricity generation. Ethanol, lignin-based coke and methanol from wood were produced at experimental units in Brazil but were not implemented on a commercial scale. Currently, a new experimental plant using a technology developed in the US is being builtmore » in the state of Bahia to generate electricity from Eucalyptus. This technology is a Biomass Integrated Gasification/Gas Turbine process which is expected to make the use of wood biomass economically feasible for electricity generation. Forest plantations are the main source of wood biomass for energy consumption by the Brazilian industrial sector. Fiscal incentives in the 1960s helped the country to begin a massive reforestation program mainly using Eucalyptus and Pinus species. A native species, bracatinga (Mimosa scabrella) has also been used extensively for wood energy plantations in southern Brazil. Technical, economic, social and environmental impacts of these plantation forests are discussed along with a forecast of the future wood energy utilization in Brazil.« less

  17. Capacity, production, and manufacture of woodbased panels in the United States and Canada

    Treesearch

    Henry Spelter

    1996-01-01

    Structural and nonstructural panel products have constituted the fastest growing segment of the wood products industries over the past two decades. Based on announced plans, growth will accelerate in the next 2 years. The cost of wood fiber used in these processes has been rising. To keep wood costs as low as possible, a growing share of the new production is being...

  18. Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process

    PubMed Central

    Saloni, Daniel E.; Lemaster, Richard L.; Jackson, Steven D.

    2010-01-01

    Wood processing industries have continuously developed and improved technologies and processes to transform wood to obtain better final product quality and thus increase profits. Abrasive machining is one of the most important of these processes and therefore merits special attention and study. The objective of this work was to evaluate and demonstrate a process monitoring system for use in the abrasive machining of wood and wood based products. The system developed increases the life of the belt by detecting (using process monitoring sensors) and removing (by cleaning) the abrasive loading during the machining process. This study focused on abrasive belt machining processes and included substantial background work, which provided a solid base for understanding the behavior of the abrasive, and the different ways that the abrasive machining process can be monitored. In addition, the background research showed that abrasive belts can effectively be cleaned by the appropriate cleaning technique. The process monitoring system developed included acoustic emission sensors which tended to be sensitive to belt wear, as well as platen vibration, but not loading, and optical sensors which were sensitive to abrasive loading. PMID:22163477

  19. 40 CFR 49.128 - Rule for limiting particulate matter emissions from wood products industry sources.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... emissions from wood products industry sources. 49.128 Section 49.128 Protection of Environment ENVIRONMENTAL... Rule for limiting particulate matter emissions from wood products industry sources. (a) What is the... certain wood products industry sources operating within the Indian reservation to control ground-level...

  20. 40 CFR 49.128 - Rule for limiting particulate matter emissions from wood products industry sources.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... emissions from wood products industry sources. 49.128 Section 49.128 Protection of Environment ENVIRONMENTAL... Region 10 § 49.128 Rule for limiting particulate matter emissions from wood products industry sources. (a... emitted from certain wood products industry sources operating within the Indian reservation to control...

  1. 40 CFR 49.128 - Rule for limiting particulate matter emissions from wood products industry sources.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... emissions from wood products industry sources. 49.128 Section 49.128 Protection of Environment ENVIRONMENTAL... Region 10 § 49.128 Rule for limiting particulate matter emissions from wood products industry sources. (a... emitted from certain wood products industry sources operating within the Indian reservation to control...

  2. 40 CFR 49.128 - Rule for limiting particulate matter emissions from wood products industry sources.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... emissions from wood products industry sources. 49.128 Section 49.128 Protection of Environment ENVIRONMENTAL... Region 10 § 49.128 Rule for limiting particulate matter emissions from wood products industry sources. (a... emitted from certain wood products industry sources operating within the Indian reservation to control...

  3. Statistical process control for residential treated wood

    Treesearch

    Patricia K. Lebow; Timothy M. Young; Stan Lebow

    2017-01-01

    This paper is the first stage of a study that attempts to improve the process of manufacturing treated lumber through the use of statistical process control (SPC). Analysis of industrial and auditing agency data sets revealed there are differences between the industry and agency probability density functions (pdf) for normalized retention data. Resampling of batches of...

  4. Housing and the wood industry, trends & market conditions

    Treesearch

    Urs Buehlmann; Matt Bumgardner; Al Schuler; K. Koenig

    2011-01-01

    Housing markets continue to have major impacts on the secondary wood industry. So, what are the steps being taken by wood products manufacturers in order to stay viable? As a follow-up to last year's article, "Housing Market's Impact on the Secondary Woodworking Industry" (Wood & Wood Products, July 2010), the focus of this year's study was...

  5. Significance of wood extractives for wood bonding.

    PubMed

    Roffael, Edmone

    2016-02-01

    Wood contains primary extractives, which are present in all woods, and secondary extractives, which are confined in certain wood species. Extractives in wood play a major role in wood-bonding processes, as they can contribute to or determine the bonding relevant properties of wood such as acidity and wettability. Therefore, extractives play an immanent role in bonding of wood chips and wood fibres with common synthetic adhesives such as urea-formaldehyde-resins (UF-resins) and phenol-formaldehyde-resins (PF-resins). Extractives of high acidity accelerate the curing of acid curing UF-resins and decelerate bonding with alkaline hardening PF-resins. Water-soluble extractives like free sugars are detrimental for bonding of wood with cement. Polyphenolic extractives (tannins) can be used as a binder in the wood-based industry. Additionally, extractives in wood can react with formaldehyde and reduce the formaldehyde emission of wood-based panels. Moreover, some wood extractives are volatile organic compounds (VOC) and insofar also relevant to the emission of VOC from wood and wood-based panels.

  6. The importance of the wood biomass in environment protection

    NASA Astrophysics Data System (ADS)

    Spîrchez, Cosmin; Lunguleasa, Aurel; Croitoru, Cǎtǎlin

    2017-12-01

    Biomass is a natural vegetal component. As a form of storing energy is chemical form sun, biomass is one of the most popular and universal resource on Earth. Today biomass fuel can be used for various purposes from room heating to produce electricity and fuel for cars. Biomass is presented in various form for energy, including biodegradable fraction of products, remains and waste from agricultural, forestry and industrial wood processing residues from factories paste stationery and paper, remnants of industrial.

  7. PM 10, PM 2.5 and PM 1.0—Emissions from industrial plants—Results from measurement programmes in Germany

    NASA Astrophysics Data System (ADS)

    Ehrlich, C.; Noll, G.; Kalkoff, W.-D.; Baumbach, G.; Dreiseidler, A.

    Emission measurement programmes were carried out at industrial plants in several regions of Germany to determine the fine dust in the waste gases; the PM 10, PM 2.5 and PM 1.0 fractions were sampled using a cascade impactor technique. The installations tested included plants used for: combustion (brown coal, heavy fuel oil, wood), cement production, glass production, asphalt mixing, and processing plants for natural stones and sand, ceramics, metallurgy, chemical production, spray painting, wood processing/chip drying, poultry farming and waste treatment. In addition waste gas samples were taken from small-scale combustion units, like domestic stoves, firing lignite briquettes or wood. In total 303 individual measurement results were obtained during 106 different measurement campaigns. In the study it was found that in more than 70% of the individual emission measurement results from industrial plants and domestic stoves the PM 10 portion amounted to more than 90% and the PM 2.5 portion between 50% and 90% of the total PM (particulate matter) emission. For thermal industrial processes the PM 1.0 portion constituted between 20% and 60% of the total PM emission. Typical particle size distributions for different processes were presented as cumulative frequency distributions and as frequency distributions. The particle size distributions determined for the different plant types show interesting similarities and differences depending on whether the processes are thermal, mechanical, chemical or mixed. Consequently, for the groups of plant investigated, a major finding of this study has been that the particle size distribution is a characteristic of the industrial process. Attempts to correlate particle size distributions of different plants to different gas cleaning technologies did not lead to usable results.

  8. Criterion 6, indicator 40 : distribution of revenues derived from forest management

    Treesearch

    Kenneth Skog; James Howard; Rebecca Westby

    2011-01-01

    For the forestry and logging, wood products, paper products, and wood furniture industries, in 2002, of a total $72.5 billion (2005$) in wages, profits and taxes, 80% went to wages, 18% to profits and 2% to taxes; 43% was provided by paper products industries, 35% by wood products industries, 17% by wood furniture industries and 5% by forestry and logging. Revenues to...

  9. Mechanical properties of wood fiber composites under the influence of temperature and humidity

    Treesearch

    Yibin Xue; David Veazie; Cindy Glinsey; Meagan Wright; Roger M. Rowell

    2003-01-01

    Woodfiber-thermoplastic composites (WPC) have received considerable attentions from the forest product industry for civil engineering applications due to its superior properties over wood and plastics alone. Particularly WPCs can be easily fabricated using traditional plastic processing techniques. The major limitation in the applications of WPCs is the poor...

  10. Wood thermoplastic composites

    Treesearch

    Daniel F. Caulfield; Craig Clemons; Roger M. Rowell

    2010-01-01

    The wood industry can expand into new sustainable markets with the formation of a new class of composites with the marriage of the wood industry and the plastics industry. The wood component, usually a flour or fiber, is combined with a thermoplastic to form an extrudable, injectable or thermoformable composite that can be used in many non-structural applications....

  11. Consequences of increasing bioenergy demand on wood and forests: An application of the Global Forest Products Model

    USGS Publications Warehouse

    Buongiorno, J.; Raunikar, R.; Zhu, S.

    2011-01-01

    The Global Forest Products Model (GFPM) was applied to project the consequences for the global forest sector of doubling the rate of growth of bioenergy demand relative to a base scenario, other drivers being maintained constant. The results showed that this would lead to the convergence of the price of fuelwood and industrial roundwood, raising the price of industrial roundwood by nearly 30% in 2030. The price of sawnwood and panels would be 15% higher. The price of paper would be 3% higher. Concurrently, the demand for all manufactured wood products would be lower in all countries, but the production would rise in countries with competitive advantage. The global value added in wood processing industries would be 1% lower in 2030. The forest stock would be 2% lower for the world and 4% lower for Asia. These effects varied substantially by country. ?? 2011 Department of Forest Economics, SLU Ume??, Sweden.

  12. Wood used in industrial markets in the United States--2000

    Treesearch

    Chris Gaston

    2002-01-01

    The main objective of this study was to gather information on the volume of wood products used by industrial manufacturers across the United States (U.S.). Specific objectives included the following: 1. To identify and categorize the main industrial manufacturing industries in the U.S. that are likely to use wood products (using the North American Industrial...

  13. Laccase-Catalyzed Surface Modification of Thermo-Mechanical Pulp (TMP) for the Production of Wood Fiber Insulation Boards Using Industrial Process Water

    PubMed Central

    Schubert, Mark; Ruedin, Pascal; Civardi, Chiara; Richter, Michael; Hach, André; Christen, Herbert

    2015-01-01

    Low-density wood fiber insulation boards are traditionally manufactured in a wet process using a closed water circuit (process water). The water of these industrial processes contains natural phenolic extractives, aside from small amounts of admixtures (e.g., binders and paraffin). The suitability of two fungal laccases and one bacterial laccase was determined by biochemical characterization considering stability and substrate spectra. In a series of laboratory scale experiments, the selected commercial laccase from Myceliophtora thermophila was used to catalyze the surface modification of thermo-mechanical pulp (TMP) using process water. The laccase catalyzed the covalent binding of the phenolic compounds of the process water onto the wood fiber surface and led to change of the surface chemistry directly via crosslinking of lignin moieties. Although a complete substitution of the binder was not accomplished by laccase, the combined use of laccase and latex significantly improved the mechanical strength properties of wood fiber boards. The enzymatically-treated TMP showed better interactions with the synthetic binder, as shown by FTIR-analysis. Moreover, the enzyme is extensively stable in the process water and the approach requires no fresh water as well as no cost-intensive mediator. By applying a second-order polynomial model in combination with the genetic algorithm (GA), the required amount of laccase and synthetic latex could be optimized enabling the reduction of the binder by 40%. PMID:26046652

  14. Woodmetrics: imaging devices and processes in wood inspection at Lulea University of Technology

    NASA Astrophysics Data System (ADS)

    Hagman, Olle

    1999-09-01

    Wood Technology research and education at Lulea University of Technology is located in Skelleftea 800 km north of Stockholm. At the campus about 25 persons are involved in education and research in Wood Technology. We are educating M.Sc. and post- graduate students in Wood Technology. The research at the campus includes the following main fields: -- Wood Machining - - Woodmetrics -- Wood Drying -- Wood Composites/Wood Material Science. Our research strategy is to obtain an individual treatment of every tree, board and piece of wood in order to get highest possible value for the forest products. This shall be accomplished by the aid of advanced scanning technology and computer technology. Woodmetrics means to measure different wood parameters in order to optimize the utilization of the raw material. Today we have the following projects in this field: Automatic wood inspection -- Color changes and moisture flow in drying processes -- Inner quality of logs and lumber - - Stem quality database -- Computer tomography -- Aesthetic properties of wood -- Market/industry/forest relations. In the Woodmetrics field we are using computer tomography, CCD cameras and other sensors in order to find and measure defects in trees and on boards. The signals are analyzed and classified with modern image analyzing techniques and advanced statistical methods.

  15. Industrial surface coatings: Wood furniture and fixtures emission inventory development. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Anex, R.P.; Lund, J.R.; Chang, D.P.Y.

    1998-06-01

    The purpose of this study is to update the methods for estimating emissions from the industrial coatings subcategory of wood furniture and fixtures. The wood furniture and fixture industry encompasses the manufacture of diverse products including cabinets, office furniture, store fixtures, and residential furniture. Specific objectives of this work are to: (1) estimate the amount of coating used in the industrial surface coating of wood furniture and fixtures; (2) develop emissions factors for each coating application category; (3) estimate variability of both coating use and emission factors; and (4) specify a source of information and method to revise and updatemore » the industrial coating of wood furniture and fixtures emission inventory.« less

  16. Wood Removals and Timber Use in New York, 1993

    Treesearch

    Eric H. Wharton; Thomas D. Martin; Richard H. Widmann; Richard H. Widmann

    1998-01-01

    Evaluates removals and timber output of New York. Results are based on survey of primary processing mills located in the state and of mills in other states that used wood from New York. Incorporates additional studies conducted during standard statewide forest inventories. Contains statistics of industrial roundwood production and the production and final end use of...

  17. Creative Entrepreneurial Applications in the Wood Industries: An Appalachian Case Study

    ERIC Educational Resources Information Center

    Hackbert, Peter H.; Glotzback, Tim; Mahoney, Gary

    2009-01-01

    This paper illustrates three academic units collaborative process to solve a design problem in the development of new wood products for the Historic Boone Tavern Hotel, Berea, Kentucky. The Boone Tavern Hotel chronology and renovation needs after 99 years are summarized. The Berea College Student Crafts Program is then described and the need for a…

  18. Recycling behind most growth in pallet production

    Treesearch

    J. Bejune; R. Bush; Philip A. Araman; B. Hansen; D. Cumbo

    2002-01-01

    This study investigated wood use trends in the U.S. pallet and container industry. The report estimates new wood use by pallet and container manufacturers, assesses wood pallet recovery and uses for recovered material, and identifies trends in new and recovered wood use by the industry. A census of the U.S. pallet and container industry was attempted and data were...

  19. Wyoming's forest products industry and timber harvest, 2000

    Treesearch

    Todd A. Morgan; Timothy P. Spoelma; Charles E. Keegan; Alfred L. Chase; Mike T. Thompson

    2005-01-01

    This report traces the flow of Wyoming's 2000 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Wyoming's primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production...

  20. Idaho's forest products industry and timber harvest, 2006

    Treesearch

    Jason P. Brandt; Todd A. Morgan; Charles E. Keegan; Jon M. Songster; Timothy P. Spoelma; Larry T. DeBlander

    2012-01-01

    This report traces the flow of Idaho's 2006 timber harvest through the primary wood-using industries; describes the structure, capacity, and condition of Idaho's primary forest products industry; and quantifies volumes and uses of wood fiber. Wood products industry historical trends and changes in harvest, production, employment, and sales are also examined...

  1. Montana's forest products industry and timber harvest, 2004

    Treesearch

    Timothy P. Spoelma; Todd A. Morgan; Thale Dillon; Alfred L. Chase; Charles E. Keegan; Larry T. DeBlander

    2008-01-01

    This report traces the flow of Montana's 2004 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Montana's primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production...

  2. Wyoming's forest products industry and timber harvest, 2005

    Treesearch

    Jason P. Brandt; Todd A. Morgan; Mike T. Thompson

    2009-01-01

    This report traces the flow of Wyoming's 2005 timber harvest through the primary timber-processing industry to the wholesale market and residue-using sectors. The structure, capacity, operations, and conditions of Wyoming's primary forest products industry are described; and volumes and uses of wood fiber are quantified. Historical and recent changes in...

  3. Minnesota timber industry: an assessment of timber product output and use, 2010

    Treesearch

    Brian F. Walters; Steve Vongroven; Ronald J. Piva

    2016-01-01

    In 2010, there were 417 active primary wood-using mills in Minnesota. These mills processed 238.8 million cubic feet of industrial roundwood. There was 226.1 million cubic feet of industrial roundwood harvested from Minnesota forests. The majority of roundwood harvested was pulpwood, accounting for 61 percent of the total. The harvesting of industrial roundwood...

  4. Material use and production changes in the U.S. wood pallet and container industry: 1992 to 2006

    Treesearch

    R. J. Bush; P. A. Araman

    2009-01-01

    A series of five studies conducted by the Virginia Tech Department of Wood Science and Forest Products, in collaboration with the USDA - Forest Service (Blacksburg, Virginia), have tracked activity in the U.S. wood pallet and container industry between 1992 and 2006. The studies documented trends in wood use and pallet production with in the industry, both new...

  5. Work environment risk factors for injuries in wood processing.

    PubMed

    Holcroft, Christina A; Punnett, Laura

    2009-01-01

    The reported injury rate for wood product manufacturing in Maine, 1987-2004, was almost twice the state-wide average for all jobs. A case-control study was conducted in wood processing plants to determine preventable risk factors for injury. A total of 157 cases with injuries reported to workers' compensation and 251 controls were interviewed. In multivariable analyses, variables associated with injury risk were high physical workload, machine-paced work or inability to take a break, lack of training, absence of a lockout/tagout program, low seniority, and male gender. Different subsets of these variables were significant when acute incidents and overexertions were analyzed separately and when all injuries were stratified by industry sub-sector. Generalizability may be limited somewhat by non-representative participation of workplaces and individuals. Nevertheless, these findings provide evidence that many workplace injuries occurring in wood processing could be prevented by application of ergonomics principles and improved work organization.

  6. Pennsylvania timber industries - a periodic assessment of timber output

    Treesearch

    James T. Bones; John K., Jr. Sherwood

    1978-01-01

    A periodic evaluation of statewide industrial timber output based on a survey of the primary wood-manufacturing plants in Pennsylvania. Contains statistics on the industrial timber harvest and plant wood-receipts in 1976, and the production and disposition of the manufacturing residues that resulted. The 166 million cubic feet of industrial wood produced in 1976...

  7. Evaluation of the Biotoxicity of Tree Wood Ashes in Zebrafish Embryos.

    PubMed

    Consigli, Veronica; Guarienti, Michela; Bilo, Fabjola; Benassi, Laura; Depero, Laura E; Bontempi, Elza; Presta, Marco

    2016-10-01

    Ashes derived from biomass combustion and used as soil fertilizers can generate negative environmental and human health risks, related to leaching of heavy metals and other putative toxic elements. Tree wood ash composition may vary depending on geographical location and surrounding industrial processes. In this study, we evaluated the biotoxicity of lixiviated tree wood ash samples from trees of the Ash (Fraxinus), Cherry (Pronus), Hazel (Corylus), and Black locust (Robinia) genus collected in an industrialized region in Northern Italy. Elemental chemical analysis of the samples was performed by total reflection X-ray fluorescence technique and their biotoxicity was assessed in zebrafish (Danio rerio) embryos. Ashes from Ash, Cherry, and Hazel trees, but not Black locust trees, had a high concentration of heavy metals and other putative toxic elements. Accordingly, a dose-dependent increase in mortality rate and morphological and teratogenic defects was observed in zebrafish embryos treated with lixiviated Ash, Cherry, and Hazel tree wood samples, whereas the toxicity of Black locust tree wood ashes was negligible. In conclusion, lixiviated wood ashes from different plants show a different content of toxic elements that correlate with their biotoxic effects on zebrafish embryos. Tree wood ashes derived from biomass combustion may represent a potential risk for the environment and human health.

  8. [Assessment of occupational exposure to wood dust in the Polish furniture industry].

    PubMed

    Szewczyńska, Małgorzata; Pośniak, Małgorzata

    2017-02-28

    Occupational exposure to wood dust can be responsible for many different harmful health effects, especially in workers employed in the wood industry. The assessment of wood dust adverse effects to humans, as well as the interpretation of its concentration measurements carried out to assess potential occupational exposure are very difficult. First of all, it is due to possible occurrence of different kind of wood dust in the workplace air, namely wood dust from dozens of species of trees belonging to 2 kinds of botanical gymnosperms and angiosperms, as well as to its different chemical composition. Total dust and respirable wood dust in the workplace air in the furniture industry was determined using the filtration-gravimetric method in accordance with Polish Standards PN-Z-04030-05:1991 and PN-Z-04030-06:1991. Air samples were collected based on the principles of individual dosimetry. Total dust concentrations were 0.84-13.92 mg/m3 and inhalable fraction concentrations, obtained after the conversion of total dust by applying a conversion factor of 1.59, were 1.34-22.13 mg/m3. Respirable fraction concentrations were 0.38-4.04 mg/m3, which makes approx. 25% of the inhalable fraction on average. The highest concentrations occurred in grinding and the lowest during milling processes of materials used in the manufacture of furniture. The results indicate that the share of respirable fraction in the inhalable fraction of wood dust is considerable. Due to the determination of the threshold limit value (TLV) for the inhalable fraction of wood dust, it is necessary to replace the previously used samplers for total dust with samplers that provide quantitative separation of wood dust inhalable fractions in accordance with the convention of this fraction as defined in PN-EN 481:1998. Med Pr 2017;68(1):45-60. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  9. Performance evaluation of cross-flow membrane system for wastewater reuse from the wood-panels industry.

    PubMed

    Dizge, Nadir

    2014-01-01

    The objectives of this investigation were to perform a series of lab-scale membrane separation experiments under various operating conditions to investigate the performance behaviour of nanofiltration membrane (NF 270) for wastewater reuse from the wood-panels industry. The operating condition effects, e.g. cross-flow velocity (CFV), trans membrane pressure (TMP) and temperature, on the permeate flux and contaminant rejection efficiency were investigated. Moreover, three different samples: (1) raw wastewater collected from the wood-panels industry; (2) ultrafiltration pre-treated wastewater (UF-NF); and (3) coagulation/flocculation pre-treated wastewater (CF-NF) were employed in this study. The UF-NF was proposed as a pre-treatment process because it could reduce the chemical oxygen demand (COD) effectively with lower energy consumption than CF-NF. The performance of NF 270 membrane was assessed by measurements of the many parameters (pH, conductivity, total dissolved solids, COD, suspended solids, total nitrogen, nitrite, nitrate, and total phosphate) under various operating conditions. It was noted that the contaminant rejection was affected by changing TMP and CFV. It was concluded that the purified water stream can be recycled into the process for water reuse or safely disposed to the river.

  10. Real-Time Implementation of a Color Sorting System

    Treesearch

    Srikathyanyani Srikanteswara; Qiang Lu; William King; Thomas Drayer; Richard Conners; D. Earl Kline; Philip A. Araman

    1997-01-01

    Wood edge glued panels are used extensively in the furniture and cabinetry industries. They are used to make doors, tops, and sides of solid wood furniture and cabinets. Since lightly stained furniture and cabinets are gaining in popularity, there is an increasing demand to color sort the parts used to make these edge glued panels. The goal of the sorting processing is...

  11. West Virginia timber product output, 2000

    Treesearch

    Bruce Hansen; Ed Murriner; Iris Baker; Melody Akers; Melody Akers

    2006-01-01

    Assesses primary wood-processing activities in West Virginia for 2000. West Virginia?s total wood harvest for industrial uses was 202 million cubic feet, up nearly 22 percent from 1994. Sawlog production totaled 803.5 million board feet, a decrease of 8.1 million board feet from 1994. There were 172 sawmills operating in the State in 2000, with only 10 percent...

  12. CHARCOAL-PRODUCING INDUSTRIES IN NORTHEASTERN BRAZIL

    EPA Science Inventory

    Charcoal workers in northeastern Brazil: Occupational risks and effects of exposure to wood smoke
    ABSTRACT
    Brazil has the largest production of charcoal in the world, which is used mostly in the iron and steel industries. In most of the production sites, the process is ba...

  13. Wyoming's forest products industry and timber harvest, 2010

    Treesearch

    Chelsea P. McIver; Colin B. Sorenson; Charles E. Keegan; Todd A. Morgan; Mike T. Thompson

    2014-01-01

    This report traces the flow of Wyoming’s 2010 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Wyoming’s primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production,...

  14. Montana's forest products industry and timber harvest, 2009

    Treesearch

    Chelsea P. McIver; Colin B. Sorenson; Charles E. Keegan; Todd A. Morgan; Jim Menlove

    2013-01-01

    This report traces the flow of Montana’s 2009 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Montana’s primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production,...

  15. Recovery, reuse and recycling by the United States wood packaging industry: 1993-2006

    Treesearch

    Robert J. Bush; Philip A. Araman; E. Bradley Hager

    2007-01-01

    The packaging industry is an important market for wood materials, especially low grade hardwoods. Approximately one-third of U.S. hardwood lumber production is utilized in the production of pallets and containers. The industry recovers significant volumes of pallets and containers from the waste stream for re-use, repair, and recycling. Industry by-products (both wood...

  16. Possibilities of Laser Processing of Paper Materials

    NASA Astrophysics Data System (ADS)

    Stepanov, Alexander; Saukkonen, Esa; Piili, Heidi

    Nowadays, lasers are applied in many industrial processes: the most developed technologies include such processes as laser welding, hybrid welding, laser cutting of steel, etc. In addition to laser processing of metallic materials, there are also many industrial applications of laser processing of non-metallic materials, like laser welding of polymers, laser marking of glass and laser cutting of wood-based materials. It is commonly known that laser beam is suitable for cutting of paper materials as well as all natural wood-fiber based materials. This study reveals the potential and gives overview of laser application in processing of paper materials. In 1990's laser technology increased its volume in papermaking industry; lasers at paper industry gained acceptance for different perforating and scoring applications. Nowadays, with reduction in the cost of equipment and development of laser technology (especially development of CO2 technology), laser processing of paper material has started to become more widely used and more efficient. However, there exists quite little published research results and reviews about laser processing of paper materials. In addition, forest industry products with pulp and paper products in particular are among major contributors for the Finnish economy with 20% share of total exports in the year 2013. This has been the standpoint of view and motivation for writing this literature review article: when there exists more published research work, knowledge of laser technology can be increased to apply it for processing of paper materials.

  17. Primary wood-product industries of southern New England - 1971

    Treesearch

    James T. Bones

    1973-01-01

    The results of a complete canvass of the primary wood manufacturers in southern New England. The report contains data about wood production and receipts for the states of the region. Comparisons are made with a similar 1952 survey and trends in industrial wood output are noted.

  18. Wood energy-commercial applications

    NASA Technical Reports Server (NTRS)

    Kennel, R. P.

    1978-01-01

    Wood energy is being widely investigated in many areas of the country because of the many obvious benefits of wood fuel such as the low price per million Btus relative to coal, oil, and gas; the wide availability of noncommercial wood and the proven ability to harvest it; established technology which is reliable and free of pollution; renewable resources; better conservation for harvested land; and the potential for jobs creation. The Southeastern United States has a specific leadership role in wood energy based on its established forest products industry experience and the potential application of wood energy to other industries and institutions. Significant questions about the widespread usage of wood energy are being answered in demonstrations around the country as well as the Southeast in areas of wood storage and bulk handling; high capitalization costs for harvesting and combustion equipment; long term supply and demand contracts; and the economic feasibility of wood energy outside the forest products industry.

  19. New electron beam facility for R&D and production at acsion industries

    NASA Astrophysics Data System (ADS)

    Lopata, V. J.; Barnard, J. W.; Saunders, C. B.; Stepanik, T. M.

    2003-08-01

    Since its incorporation in 1998, Acsion Industries Inc. has been working with clients to develop industrial uses of electron processing for improving products and manufacturing processes. Acsion has promoted this technology for sterilizing medical devices and pharmaceuticals, for treating wood pulp in the viscose/rayon process, for reducing pathogens in food and animal feed, and for curing advanced composites for the aerospace industry. As a result of significant developments in its composite curing programs, Acsion has recently made major modifications to its facility to increase its production and R&D capabilities. These modifications are described in this paper.

  20. North American Wood Waste Forum: Summary of Group Feedback, 2-3, 2012

    Treesearch

    Bob Falk

    2012-01-01

    This report summarizes the feedback and recommendations of the North American Wood Recovery Group. This report summarizes the barriers and opportunities in wood recovery, reuse, and recycling as identified by this group of stakeholders from the wood industry, waste industry, and relevant government agencies.

  1. Bioplastic production using wood mill effluents as feedstock.

    PubMed

    Ben, M; Mato, T; Lopez, A; Vila, M; Kennes, C; Veiga, M C

    2011-01-01

    Fibreboard production is one of the most important industrial activities in Galicia (Spain). Great amounts of wastewater are generated, with properties depending on the type of wood, treatment process, final product and water reusing, among others. These effluents are characterized by a high chemical oxygen demand, low pH and nutrients limitation. Although anaerobic digestion is one of the most suitable processes for the treatment, lately bioplastics production (mainly polyhydroxyalkanoates) from wastewaters with mixed cultures is being evaluated. Substrate requirements for these processes consist of high organic matter content and low nutrient concentration. Therefore, wood mill effluents could be a suitable feedstock. In this work, the possibility of producing bioplastics from to wood mill effluents is evaluated. First, wood mill effluent was converted to volatile fatty acids in an acidogenic reactor operated at two different hydraulic retention times of 1 and 1.5 d. The acidification percentage obtained was 37% and 42%, respectively. Then, aerobic batch assays were performed using fermented wood mill effluents obtained at different hydraulic retention times. Assays were developed using different cultures as inoculums. The maximum storage yield of 0.57 Cmmol/Cmmol was obtained when when the culture was enriched on a synthetic media.

  2. Alaska's timber harvest and forest products industry, 2005

    Treesearch

    Jeff M. Halbrook; Todd A. Morgan; Jason P. Brandt; Charles E. Keegan; Thale Dillon; Tara M. Barrett

    2009-01-01

    This report traces the flow of timber harvested in Alaska during calendar year 2005, describes the composition and operations of the state's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, and sales of primary wood products....

  3. A primary estimation of PCDD/Fs release reduction from non-wood pulp and paper industry in China based on the investigation of pulp bleaching with chlorine converting to chlorine dioxide.

    PubMed

    Xiao, Qingcong; Song, Xiaoqian; Li, Wenchao; Zhang, Yuanna; Wang, Hongchen

    2017-10-01

    Chlorine bleaching technology (C process, CEH process, H process and theirs combination), which was identified as a primary formation source of PCDD/Fs, is still widely used by the vast majority of Chinese non-wood pulp and paper mills (non-wood PMs). The purpose of this study was to provide information and data support for further eliminating dioxin for non-wood PMs in China, and especially to evaluate the PCDD/Fs release reduction for those mills converting their pulp bleaching processes from CEH to ECF. The PCDD/Fs concentrations of the bleached pulp and bleaching wastewater with ECF bleaching were in the ranges of 0.13-0.8 ng TEQ kg -1 , and 0.15-1.9 pg TEQ L -1 , respectively, which were far lower than those with CEH process, indicating that the ECF process is an effective alternative bleaching technology to replace CEH in Chinese non-wood PMs to reduce dioxin release. The release factor via flue gas of the alkali recovery boiler in Chinese non-wood PMs was first reported to be 0.092 μg TEQ Ad t -1 in this study. On the assumption that pulp bleaching processes of all Chinese non-wood PMs were converted from CEH to ECF, the annual release of PCDD/Fs via the bleaching wastewater and bleached pulp would be reduced by 79.1%, with a total of 1.60 g TEQ. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Overview of the wood adhesives industry in China

    Treesearch

    Chung-Yun Hse

    1999-01-01

    Adhesives products and demand for them in China are discussed in this paper, with special emphasis on wood adhesives products in this decade. In 1994, the wood industries in China con­sumed more than 330,000 tons of adhesives. The estimated demand for wood adhesives will be more than 560,000 tons in the year 2000. The main wood adhesive used is urea-formaldehyde resin...

  5. Microscopic characterization of tension wood cell walls of Japanese beech (Fagus crenata) treated with ionic liquids.

    PubMed

    Kanbayashi, Toru; Miyafuji, Hisashi

    2016-09-01

    Tension wood that is an abnormal part formed in angiosperms has been barely used for wood industry. In this study, to utilize the tension wood effectively by means of liquefaction using ionic liquid, we performed morphological and topochemical determination of the changes in tension wood of Japanese beech (Fagus crenata) during ionic liquid treatment at the cellular level using light microscopy, scanning electron microscopy and confocal Raman microscopy. Ionic liquid treatment induced cell wall swelling in tension wood. Changes in the tissue morphology treated with ionic liquids were different between normal wood and tension wood, moreover the types of ionic liquids. The ionic liquid 1-ethyl-3-methylimidazolium chloride liquefied gelatinous layers rapidly, whereas 1-ethylpyridinium bromide liquefied slowly but delignified selectively. These novel insights into the deconstruction behavior of tension wood cell walls during ionic liquid treatment provide better understanding of the liquefaction mechanism. The obtained knowledge will contribute to development of an effective chemical processing of tension wood using ionic liquids and lead to efficient use of wood resources. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Technical change in forest sector models: the global forest products model approach

    Treesearch

    Joseph Buongiorno; Sushuai Zhu

    2015-01-01

    Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

  7. Energy from wood

    Treesearch

    J.I. Zerbe

    2004-01-01

    In most developing countries wood and charcoal are the predominant fuels for preparation of food to maintain the quality of life that encompasses the majority of citizens. In many developing countries wood fuels are also important for small and medium size industries. Moreover, energy from wood continues to be important in industrial countries. In the USA biomass...

  8. Wood usage trends in the furniture and fixtures industry

    Treesearch

    H. N. Spelter; R. N. Stone; D. B. McKeever

    1978-01-01

    Trends of wood use in the furniture and fixtures industry are examined. Wood consumption statistics from the 1972 Census of Manufactures are used to update prior Forest Service surveys, and separate estimates are made for 1977 consumption. A methodology for making up-to-date estimates of wood usage is also presented.

  9. Evaluating chemical-, mechanical-, and bio-pulping processes and their sustainability characterization using life cycle assessment

    Treesearch

    Tapas K. Das; Carl Houtman

    2004-01-01

    Pulp and paper manufacturing constitutes one of the largest industry segments in the United States in term of water and energy usage and total discharges to the environment. More than many other industries, however, this industry plays an important role in sustainable development because its chief raw material— wood fiber—is renewable. This industry provides an example...

  10. Using manufacturing simulators to evaluate important processing decisions in the furniture and cabinet industries

    Treesearch

    Janice K. Wiedenbeck; Philip A. Araman

    1995-01-01

    We've been telling the wood industry about our process simulation modeling research and development work for several years. We've demonstrated our crosscut-first and rip-first rough mill simulation and animation models. Weâve advised companies on how they could use simulation modeling to help make critically important, pending decisions related to mill layout...

  11. Surface chemistry changes of weathered HDPE/wood-flour composites studied by XPS and FTIR spectroscopy

    Treesearch

    Nicole M. Stark; Laurent M. Matuana

    2004-01-01

    The use of wood-derived fillers by the thermoplastic industry has been growing, fueled in part by the use of wood-fiber–thermoplastic composites by the construction industry. As a result, the durability of wood-fiber– thermoplastic composites after ultraviolet exposure has become a concern. Samples of 100% high-density polyethylene (HDPE) and HDPE filled with 50% wood-...

  12. Evaluation of various fire retardants for use in wood flour--polyethylene composites

    Treesearch

    Nicole M. Stark; Robert H. White; Scott A. Mueller; Tim A. Osswald

    2010-01-01

    Wood-plastic composites represent a growing class of materials used by the residential construction industry and the furniture industry. For some applications in these industries, the fire performance of the material must be known, and in some cases improved. However, the fire performance of wood-plastic composites is not well understood, and there is little...

  13. Iowa timber industry--an assessment of timber product output and use, 2005

    Treesearch

    David E. Haugen; Dennis D. Michel

    2010-01-01

    Reports findings of a survey of all primary wood-using mills in Iowa in 2005 and compares those findings with earlier surveys. Production and receipts of industrial roundwood are reported by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by Iowa's primary wood-using industry.

  14. Michigan timber industry--an assessment of timber product output and use, 1996

    Treesearch

    David E. Haugen; John Pilon

    2002-01-01

    Reports findings of a survey of all primary wood-using mills in Michigan in 1996 and compares those findings with earlier surveys, Reports production and receipts of industrial roundwood by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by Michigan''s primary wood-using industry.

  15. Nebraska timber industry--an assessment of timber product output and use, 1993.

    Treesearch

    Ronald L. Hackett; Dennis M. Adams

    1996-01-01

    Reports findings of a survey of all primary wood-using mills in Nebraska in 1993 and compares those findings with earlier surveys. Reports production and receipts of industrial roundwood by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by Nebraska's primary wood-using industry.

  16. Michigan timber industry--an assessment of timber product output and use, 1998.

    Treesearch

    David E. Haugen; Anthony Weatherspoon

    2003-01-01

    Reports findings of a survey of all primary wood-using mills in Michigan in 1998 and compares those findings with earlier surveys. Production and receipts of industrial roundwood are reported by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by Michigan''s primary wood-using industry.

  17. Michigan timber industry--an assessment of timber product output and use, 1992.

    Treesearch

    Dennis M. May; John Pilon

    1995-01-01

    Reports findings of a survey of all primary wood-using mills in Michigan in 1992 and compares them with findings from earlier surveys. Production and receipts of industrial roundwood are reported by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by Michigan's primary wood-using industry.

  18. Kansas timber industry--an assessment of timber product output and use, 1993.

    Treesearch

    Ronald L. Hackett; John K. Strickler

    1996-01-01

    Reports findings of a survey of all primary wood-using mills in Kansas in 1993 and compares those findings with earlier surveys. Reports production and receipts of industrial roundwood by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by Kansas's primary wood-using industry.

  19. Kraft pulping of industrial wood waste

    Treesearch

    Aziz Ahmed; Masood Akhtar; Gary C. Myers; Gary M. Scott

    1998-01-01

    Most of the approximately 25 to 30 million tons of industrial wood waste generated in the United States per year is burned for energy and/or landfilled. In this study, kraft pulp from industrial wood waste was evaluated and compared with softwood (loblolly pine, Douglas-fir) and hardwood (aspen) pulp. Pulp bleachability was also evaluated. Compared to loblolly pine...

  20. Whole genome and global gene expression analyses of the model mushroom Flammulina velutipes reveal a high capacity for lignocellulose degradation.

    PubMed

    Park, Young-Jin; Baek, Jeong Hun; Lee, Seonwook; Kim, Changhoon; Rhee, Hwanseok; Kim, Hyungtae; Seo, Jeong-Sun; Park, Hae-Ran; Yoon, Dae-Eun; Nam, Jae-Young; Kim, Hong-Il; Kim, Jong-Guk; Yoon, Hyeokjun; Kang, Hee-Wan; Cho, Jae-Yong; Song, Eun-Sung; Sung, Gi-Ho; Yoo, Young-Bok; Lee, Chang-Soo; Lee, Byoung-Moo; Kong, Won-Sik

    2014-01-01

    Flammulina velutipes is a fungus with health and medicinal benefits that has been used for consumption and cultivation in East Asia. F. velutipes is also known to degrade lignocellulose and produce ethanol. The overlapping interests of mushroom production and wood bioconversion make F. velutipes an attractive new model for fungal wood related studies. Here, we present the complete sequence of the F. velutipes genome. This is the first sequenced genome for a commercially produced edible mushroom that also degrades wood. The 35.6-Mb genome contained 12,218 predicted protein-encoding genes and 287 tRNA genes assembled into 11 scaffolds corresponding with the 11 chromosomes of strain KACC42780. The 88.4-kb mitochondrial genome contained 35 genes. Well-developed wood degrading machinery with strong potential for lignin degradation (69 auxiliary activities, formerly FOLymes) and carbohydrate degradation (392 CAZymes), along with 58 alcohol dehydrogenase genes were highly expressed in the mycelium, demonstrating the potential application of this organism to bioethanol production. Thus, the newly uncovered wood degrading capacity and sequential nature of this process in F. velutipes, offer interesting possibilities for more detailed studies on either lignin or (hemi-) cellulose degradation in complex wood substrates. The mutual interest in wood degradation by the mushroom industry and (ligno-)cellulose biomass related industries further increase the significance of F. velutipes as a new model.

  1. Whole Genome and Global Gene Expression Analyses of the Model Mushroom Flammulina velutipes Reveal a High Capacity for Lignocellulose Degradation

    PubMed Central

    Park, Young-Jin; Baek, Jeong Hun; Lee, Seonwook; Kim, Changhoon; Rhee, Hwanseok; Kim, Hyungtae; Seo, Jeong-Sun; Park, Hae-Ran; Yoon, Dae-Eun; Nam, Jae-Young; Kim, Hong-Il; Kim, Jong-Guk; Yoon, Hyeokjun; Kang, Hee-Wan; Cho, Jae-Yong; Song, Eun-Sung; Sung, Gi-Ho; Yoo, Young-Bok; Lee, Chang-Soo; Lee, Byoung-Moo; Kong, Won-Sik

    2014-01-01

    Flammulina velutipes is a fungus with health and medicinal benefits that has been used for consumption and cultivation in East Asia. F. velutipes is also known to degrade lignocellulose and produce ethanol. The overlapping interests of mushroom production and wood bioconversion make F. velutipes an attractive new model for fungal wood related studies. Here, we present the complete sequence of the F. velutipes genome. This is the first sequenced genome for a commercially produced edible mushroom that also degrades wood. The 35.6-Mb genome contained 12,218 predicted protein-encoding genes and 287 tRNA genes assembled into 11 scaffolds corresponding with the 11 chromosomes of strain KACC42780. The 88.4-kb mitochondrial genome contained 35 genes. Well-developed wood degrading machinery with strong potential for lignin degradation (69 auxiliary activities, formerly FOLymes) and carbohydrate degradation (392 CAZymes), along with 58 alcohol dehydrogenase genes were highly expressed in the mycelium, demonstrating the potential application of this organism to bioethanol production. Thus, the newly uncovered wood degrading capacity and sequential nature of this process in F. velutipes, offer interesting possibilities for more detailed studies on either lignin or (hemi-) cellulose degradation in complex wood substrates. The mutual interest in wood degradation by the mushroom industry and (ligno-)cellulose biomass related industries further increase the significance of F. velutipes as a new model. PMID:24714189

  2. Ovalbumin as a Wood Adhesive

    Treesearch

    Charles R. Frihart; Holly Satori; Zhu Rongxian; Michael J. Birkeland

    2014-01-01

    Use of proteins to bond wood dominated industrial production until the middle of the 20th century (1). The ensuing creation of the plywood and glulam beam industries allowed for more efficient use of wood resources than is possible with solid wood products. Many protein sources have been used as adhesives, including plant (soybean) and animal (blood, fish scales,...

  3. Common questions and concerns from government users of industrial treated wood products

    Treesearch

    Stan Lebow; James Wacker

    2011-01-01

    Because pressure-treated wood is perceived as economical and relatively easy to install, federal, state and local government agencies sometimes utilize treated wood for industrial-type applications. When these agencies have questions or concerns about treated wood they may make inquiries to the US Forest Products Laboratory. These inquiries provide an indication of...

  4. Wood Protection Research Council: Research Priorities 2013

    Treesearch

    Carol A Clausen; Frederick Green III; Grant T. Kirker; Stan T. Lebow

    2014-01-01

    This report summarizes presentations and comments from the inaugural Wood Protection Research Council meeting. Research needs for the wood protection industry were identified and prioritized. Methods for successfully addressing research needs were discussed by industry, academia, and association representatives.

  5. Demonstration of a 1 MWe biomass power plant at USMC Base Camp Lejeune. Report for July 1994-May 1997

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cleland, J.; Purvis, C.R.

    1998-06-01

    The paper discusses a biomass energy conversion project being sponsored by EPA to demonstrate an enviromentally and economically sound electrical power option for government installations, industrial sites, rural cooperatives, small municipalities, and developing countries. Wood gasification combined with internal combustion engines was chosen because of (1) recent improvements in gas cleaning, (2) simple economical operation for units < 10 MW, and (3) the option of a clean cheap fuel for the many existing facilities generating expensive electricity from petroleum fuels with reciprocating engines. The plant incorporates a downdraft, moving-bed gasifier utilizing hogged waste wood from the Marine Corps Base atmore » Camp Lejeune, NC. A moving-bed bulk wood dryer and both spark ignition and diesel engines are included. Unique process design features are described briefly, relative to the gasifier, wood drying, tar separation, and process control. A test plan for process optimization and demonstration of reliability, economics, and environmental impact is outlined.« less

  6. The nature of the MDI/wood bond

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Marcinko, J.J.; Phanopoulos, C.; Newman, W.H.

    1995-12-01

    Polymeric diphenylmethane diisocyanate (pMDI) binders have been used in the wood composite industry for 20 years. Almost one half of the oriented strand board (OSB) manufactures in North America are taking advantage of its processing speed and superior board performance. MDI`s current use in Strandboard, MDF (medium density fiber board), LVL (laminated veneer lumber), Plywood, and Particleboard is wide spread. A fundamental understanding of the role of MIDI as a binder in these complex composites is essential for further processing optimization. Experimental data is presented which investigates the nature of the chemical bonding in wood composites. Solid state nuclear magneticmore » resonance (NMR) data is combined with data from thermal analysis and fluorescence microscopy to investigate the chemistry, penetration, and morphology of the isocyanate/wood interphase. Structure property relationships are developed and related to composite performance. The study contrasts isocyanate and phenol formaldehyde binder systems.« less

  7. Alaska’s timber harvest and forest products industry, 2011

    Treesearch

    Erik C. Berg; Charles B. Gale; Todd A. Morgan; Allen M. Brackley; Charles E. Keegan; Susan J. Alexander; Glenn A. Christensen; Chelsea P. McIver; Micah G. Scudder

    2014-01-01

    This report traces the flow of timber harvested in Alaska during calendar year 2011, describes the composition and operations of the state’s primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, export, sales of primary wood products,...

  8. Plains States timber industry--an assessment of timber product output and use, 1993.

    Treesearch

    Dennis M. May

    1996-01-01

    Reports findings of a survey of all primary wood-using mills in the Plains States (Kansas, Nebraska, North Dakota, South Dakota) in 1993 and compares findings with earlier surveys. Production and receipts of industrial roundwood by product, species, and state. The quantity, type, and disposition of wood and bark residues generated by the primary wood-using industry...

  9. Changes and Trends in the Pallet Industry: The Use of New Wood Materials

    Treesearch

    Robert J. Bush; Philip A. Araman

    1998-01-01

    Wood has dominated the pallet industry as its principal raw material since palletized material handling began. Pallet production and use grew dramatically after World War II and wood remained the material of choice. Throughout this period the pallet industry has been an important market for lower grades of hardwood lumber and cants. Today, the demand for pallet grade...

  10. South Dakota timber industry--an assessment of timber product output and use, 1993

    Treesearch

    Ronald Hackett; Raymond A. Sowers

    1996-01-01

    Reports findings of a survey of all primary wood-using mills in South Dakota in 1993 and compares those findings with earlier surveys. Reports production and receipts of industrial roundwood by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by South Dakota's primary wood-using industry.

  11. North Dakota timber industry--an assessment of timber product output and use, 2003.

    Treesearch

    David E. Haugen; Robert A. Harsel

    2005-01-01

    Reports findings of a survey of all primary wood-using mills in North Dakota in 2003 and compares those findings with earlier surveys. Production and receipts of industrial roundwood are reported by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by North Dakota's primary wood-using industry.

  12. North Dakota timber industry-an assessment of timber product output and use, 1998.

    Treesearch

    David E. Haugen; Robert A. Harsel

    2001-01-01

    Reports findings of a survey of all primary wood-using mills in North Dakota in 1998 and compares those findings with earlier surveys. Reports production and receipts of industrial roundwood by product, species, and county. Also reports the quantity, type and disposition of wood and bark residues generated by North Dakota's primary wood-using industry.

  13. North Dakota timber industry--an assessment of timber product output and use, 1993.

    Treesearch

    Dennis M. May; Robert Harsel

    1995-01-01

    Reports findings of a survey of all primary wood-using mills in North Dakota in 1993 and compares those findings with earlier surveys. Production and receipts of industrial roundwood are reported by product, species, and county. Also reports the quantity, type, and disposition of wood and bark residues generated by North Dakota's primary wood-using industry....

  14. The timber industries of Pennsylvania, 1988

    Treesearch

    Eric H. Wharton; John L. Bearer; John L. Bearer

    1993-01-01

    Evaluates regional timber output of Pennsylvania. Results are based on a survey of primary processing mills located in the state, and of mills in other states that used wood from Pennsylvania. Contains statistics on industrial timber production and mill receipts and the production and final end use of manufacturing residues. Comparisons are made between historical and...

  15. Phosphorylated lignin as a halogen-free flame retardant additive for epoxy composites

    Treesearch

    Gamini P. Mendis; Sydney G. Weiss; Matthew Korey; Charles R. Boardman; Mark Dietenberger; Jeffrey P. Youngblood; John A. Howarter

    2016-01-01

    Sustainable, non-halogenated flame retardants are desired for a variety of industry applications. Lignin, as an industrially processed wood derivative, has been examined as a potential sustainable flame retardant additive to polymer systems. Here, the lignin is phosphorylated using a pyridine-catalysed esterification reaction with diphenyl phosphoryl chloride to...

  16. Examination of regional hardwood roundwood markets in West Virginia

    Treesearch

    Delton Alderman; William Luppold

    2005-01-01

    West Virginia's large and diverse hardwood resource ranges from oak-hickory forests in the southern and northwestern regions of the state to northern hardwood stands in the northeastern region. West Virginia is home to a diverse group of primary hardwood processing industries including hardwood grade mills, industrial hardwood sawmills, engineered wood-product...

  17. An Examination of Regional Hardwood Roundwood Markets in West Virginia

    Treesearch

    William Luppold; Delton Alderman; Delton Alderman

    2005-01-01

    West Virginia?s hardwood resource is large and diverse ranging from oak-hickory forests in the southern and western portions of the state to northern hardwood stands in the northeastern region. West Virginia also has a diverse group of primary hardwood- processing industries, including hardwood grade mills, industrial hardwood sawmills, engineered wood-product...

  18. COMPARE : a method for analyzing investment alternatives in industrial wood and bark energy systems

    Treesearch

    Peter J. Ince

    1983-01-01

    COMPARE is a FORTRAN computer program resulting from a study to develop methods for comparative economic analysis of alternatives in industrial wood and bark energy systems. COMPARE provides complete guidelines for economic analysis of wood and bark energy systems. As such, COMPARE can be useful to those who have only basic familiarity with investment analysis of wood...

  19. Industrial Arts--Woods and Wood Technology: A Curriculum Guide for Intermediate and Secondary Level Programs.

    ERIC Educational Resources Information Center

    Missouri Council for Industrial Arts Education.

    The curriculum outline is designed to aid the instructor in developing a more complete course of study in woods and wood technology for intermediate and secondary school students. The guide is introduced by a discussion of objectives fundamental to a sound program of industrial arts education, followed by an outline and objectives for the content…

  20. U.S. wood pallet material use trends

    Treesearch

    Philip A. Araman; Robert J. Bush; E.Bradley Hager

    2010-01-01

    A series of five studies conducted by the Virginia Tech Department of Wood Science and Forest Products, in collaboration with the USDA – Forest Service (Blacksburg, Virginia), have tracked activity in the U.S. wood pallet and container industry between 1992 and 2006. The studies determined trends in wood use and pallet production within the industry, both new and...

  1. Supply and demand of timber for wood turning in Maine

    Treesearch

    Eric H. Wharton; Robert L., Jr. Nevel; Douglas S. Powell; Douglas S. Powell

    1987-01-01

    An analytical report on the volume of wood used by the wood-turning industry in Maine, and the volume of timber from the state's timberlands that may be suitable for turnstock. Findings are based on the third forest resource survey of Maine timberlands, and an industry canvass of primary manufacturing mills using wood from Maine timberlands, both conducted in 1982...

  2. Whole-system carbon balance for a regional temperate forest in Northern Wisconsin, USA

    NASA Astrophysics Data System (ADS)

    Peckham, S. D.; Gower, S. T.

    2010-12-01

    The whole-system (biological + industrial) carbon (C) balance was estimated for the Chequamegon-Nicolet National Forest (CNNF), a temperate forest covering 600,000 ha in Northern Wisconsin, USA. The biological system was modeled using a spatially-explicit version of the ecosystem process model Biome-BGC. The industrial system was modeled using life cycle inventory (LCI) models for wood and paper products. Biome-BGC was used to estimate net primary production, net ecosystem production (NEP), and timber harvest (H) over the entire CNNF. The industrial carbon budget (Ci) was estimated by applying LCI models of CO2 emissions resulting from timber harvest and production of specific wood and paper products in the CNNF region. In 2009, simulated NEP of the CNNF averaged 3.0 tC/ha and H averaged 0.1 tC/ha. Despite model uncertainty, the CNNF region is likely a carbon sink (NEP - Ci > 0), even when CO2 emissions from timber harvest and production of wood and paper products are included in the calculation of the entire forest system C budget.

  3. Pallet recovery, repair and remanufacturing in a changing industry: 1992 to 2006

    Treesearch

    Philip Araman; Les Groom

    2010-01-01

    In a previously published Pallet Enterprise article (Material Use and Production Changes in the U.S. Wood Pallet and Container Industry: 1992 to 2006, June 2009), we provided the results of a series of studies that investigated the use of new wood by the pallet and container industry. As we mentioned in the article, the use of new wood is only one of the changes in raw...

  4. Primary forest products industry and timber use, Missouri, 1980.

    Treesearch

    James E. Blyth; Shelby Jones; W. Brad Smith

    1983-01-01

    Discusses recent Missouri forest industry trends; timber removals for industrial roundwood in 1980; and production and receipts of saw logs, pulpwood, cooperage logs, charcoal wood, and other industrial roundwood products. Reports on associated primary mill wood and bark residue and the disposition of mill residue.

  5. Occupational health and safety issues in Ontario sawmills and veneer/plywood plants: a pilot study.

    PubMed

    Verma, Dave K; Demers, Cecil; Shaw, Don; Verma, Paul; Kurtz, Lawrence; Finkelstein, Murray; des Tombe, Karen; Welton, Tom

    2010-01-01

    A pilot study was conducted within the Ontario sawmill and veneer/plywood manufacturing industry. Information was collected by postal questionnaire and observational walk-through surveys. Industrial hygiene walk-through surveys were conducted at 22 work sites, and measurements for wood dust, noise, and bioaerosol were taken. The aim of the study was to obtain data on the current status regarding health and safety characteristics and an estimate of wood dust, noise, and bioaerosol exposures. The occupational exposure to wood dust and noise are similar to what has been reported in this industry in Canada and elsewhere. Airborne wood dust concentration ranged between 0.001 mg/m³ and 4.87 mg/m³ as total dust and noise exposure ranged between 55 and 117 dB(A). The study indicates the need for a more comprehensive industry-wide study of wood dust, noise, and bioaersols.

  6. Occupational Health and Safety Issues in Ontario Sawmills and Veneer/Plywood Plants: A Pilot Study

    PubMed Central

    Verma, Dave K.; Demers, Cecil; Shaw, Don; Verma, Paul; Kurtz, Lawrence; Finkelstein, Murray; des Tombe, Karen; Welton, Tom

    2010-01-01

    A pilot study was conducted within the Ontario sawmill and veneer/plywood manufacturing industry. Information was collected by postal questionnaire and observational walk-through surveys. Industrial hygiene walk-through surveys were conducted at 22 work sites, and measurements for wood dust, noise, and bioaerosol were taken. The aim of the study was to obtain data on the current status regarding health and safety characteristics and an estimate of wood dust, noise, and bioaerosol exposures. The occupational exposure to wood dust and noise are similar to what has been reported in this industry in Canada and elsewhere. Airborne wood dust concentration ranged between 0.001 mg/m3 and 4.87 mg/m3 as total dust and noise exposure ranged between 55 and 117 dB(A). The study indicates the need for a more comprehensive industry-wide study of wood dust, noise, and bioaersols. PMID:21253473

  7. Converting small industrial boilers to burn wood fuels

    Treesearch

    Raymond L. Sarles; J. Penn Rutherfoord

    1982-01-01

    Investigates the engineering and economic feasibility of retrofitting two small industrial boilers (32 hp and 52 hp, respectively) for firing green wood fuels. Subjects covered include fuel requirements and costs; availability, storage, and handling of wood fuels; and designs, specifications, stack emissions, cost estimates, and economic feasibility. The economics of...

  8. Wood and fish residuals composting in Alaska

    Treesearch

    David Nicholls; Thomas Richard; Jesse A. Micales

    2002-01-01

    The unique climates and industrial mix in southeast and south central Alaska are challenges being met by the region's organics recyclers. OMPOSTING wood residuals in Alaska has become increasingly important in recent years as wood processors and other industrial waste managers search for environmentally sound and profitable outlets. Traditionally, Alaska?s...

  9. Electron-processing technology: A promising application for the viscose industry

    NASA Astrophysics Data System (ADS)

    Stepanik, T. M.; Rajagopal, S.; Ewing, D.; Whitehouse, R.

    1998-06-01

    In marketing its IMPELA ® line of high power, high-throughput industrial accelerators, Atomic Energy of Canada Limited (AECL) is working with viscose (rayon) companies world-wide to integrate electron-processing technology as part of the viscose manufacturing process. The viscose industry converts cellulose wood pulp into products such as staple fiber, filament, cord, film, packaging, and non-edible sausage casings. This multibillion dollar industry is currently suffering from high production costs, and is facing increasingly stringent environmental regulations. The use of electron-treated pulp can significantly lower production costs and can provide equally significant environmental benefits. This paper describes our current understanding of the benefits of using electron-treated pulp in this process, and AECL's efforts in developing this technology.

  10. Localization of wood floor structure by infrared thermography

    NASA Astrophysics Data System (ADS)

    Cochior Plescanu, C.; Klein, M.; Ibarra-Castanedo, C.; Bendada, A.; Maldague, X.

    2008-03-01

    One of our industrial partners, Assek Technologie, is interested in developing a technique that would improve the drying process of wood floor in basements after flooding. In order to optimize the procedure, the floor structure and the damaged (wet) area extent must first be determined with minimum intrusion (minimum or no dismantling). The present study presents the use of infrared thermography to reveal the structure of (flooded) wood floors. The procedure involves opening holes in the floor. Injecting some hot air through those holes reveals the framing structure even if the floor is covered by vinyl or ceramic tiles. This study indicates that thermal imaging can also be used as a tool to validate the decontamination process after drying. Thermal images were obtained on small-scale models and in a demonstration room.

  11. The timber industries of Maryland

    Treesearch

    James T. Bones; John E. Brodie

    1977-01-01

    A periodic evaluation of statewide industrial timber output based upon a complete survey of the primary wood manufacturing plants in Maryland. Contains statistics about industrial timber production and receipts in 1975 and the production and disposition of the manufacturing residues that resulted. The 43 million cubic feet of industrial wood produced in 1975...

  12. Wood-related occupations, wood dust exposure, and sinonasal cancer.

    PubMed

    Hayes, R B; Gerin, M; Raatgever, J W; de Bruyn, A

    1986-10-01

    A case-control study was conducted to examine the relations between type of woodworking and the extent of wood dust exposure to the risks for specific histologic types of sinonasal cancer. In cooperation with the major treatment centers in the Netherlands, 116 male patients newly diagnosed between 1978 and 1981 with primary malignancies of epithelial origin of this site were identified for study. Living controls were selected from the municipal registries, and deceased controls were selected from the national death registry. Interviews were completed for 91 (78%) cases and 195 (75%) controls. Job histories were coded by industry and occupation. An index of exposure was developed to classify the extent of occupational exposure to wood dust. When necessary, adjustment was made for age and usual cigarette use. The risk for nasal adenocarcinoma was elevated by industry for the wood and paper industry (odds ratio (OR) = 11.9) and by occupation for those employed in furniture and cabinet making (OR = 139.8), in factory joinery and carpentry work (OR = 16.3), and in association with high-level wood dust exposure (OR = 26.3). Other types of nasal cancer were not found to be associated with wood-related industries or occupations. A moderate excess in risk for squamous cell cancer (OR = 2.5) was associated with low-level wood dust exposure; however, no dose-response relation was evident. The association between wood dust and adenocarcinoma was strongest for those employed in wood dust-related occupations between 1930 and 1941. The risk of adenocarcinoma did not appear to decrease for at least 15 years after termination of exposure to wood dust. No cases of nasal adenocarcinoma were observed in men whose first exposure to wood dust occurred after 1941.

  13. Using a low melting solvent mixture to extract value from wood biomass

    NASA Astrophysics Data System (ADS)

    Hiltunen, Jaakko; Kuutti, Lauri; Rovio, Stella; Puhakka, Eini; Virtanen, Tommi; Ohra-Aho, Taina; Vuoti, Sauli

    2016-09-01

    Green chemistry, sustainability and eco-efficiency are guiding the development of the next generation of industrial chemical processes. The use of non-edible lignocellulosic biomass as a source of chemicals and fuels has recently raised interest due to the need for an alternative to fossil resources. Valorisation mainly focuses on cellulose, which has been used for various industrial scale applications for decades. However, creating an economically more viable value chain would require the exploitation of the other main components, hemicellulose and lignin. Here, we present a new low melting mixture composition based in boric acid and choline chloride, and demonstrate its efficiency in the fractionation of wood-based biomass for the production of non-condensed lignin, suitable for further use in the search for sustainable industrial applications, and for the selective conversion of hemicelluloses into valuable platform chemicals.

  14. Primary forest products industry and timber use, Iowa, 1972.

    Treesearch

    James E. Blyth; William A. Farris

    1975-01-01

    Discusses recent Iowa forest industry trends, and production of saw logs, veneer logs, pulpwood, and other roundwood products. Comments on outlook for Iowa forest industry and production and use of roundwood and primary wood-using plant wood and bark residue.

  15. Superfund Record of Decision (EPA Region 6): Texarkana Wood Preserving Company, Texarkana, Bowie County, TX. (First remedial action), September 1990

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    The 25-acre Texarkana Wood Preserving site is a former wood treating facility in Bowie County, Texas, within the Days Creek 100-year floodplain. Surrounding land use is industrial, residential, and agricultural. Since the early 1900s, several lumber-related businesses have operated at the site, with documented creosote-based wood treating operations starting in 1954. By 1971, Texarkana was also using creosote and pentachlorophenol for wood preserving. State investigations of the site between 1968 and 1984, showed Texarkana to be negligent or delinquent in fulfilling various permit requirements. The Record of Decision (ROD) addresses onsite contaminated soil near the processing ponds and contaminated groundmore » water in a shallow aquifer. The primary contaminants of concern affecting the soil, sediment, sludge, and ground water are organics including dioxin, PAHs, pesticides, and phenols.« less

  16. Missouri timber industry - an assessment of timber product output and use, 1997.

    Treesearch

    Ronald J. Piva; Shelby G. Jones; Lynn W. Barnickol; Thomas B. Treiman

    2000-01-01

    Discusses recent Missouri forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, cooperage, charcoal, and other products in 1997, and compares findings with earlier surveys. Reports on quantity, type, and disposition of wood and bark residues generated by the primary wood-using industry.

  17. Furniture wood wastes: Experimental property characterisation and burning tests

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tatano, Fabio; Barbadoro, Luca; Mangani, Giovanna

    2009-10-15

    Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected 'raw' and primarily 'engineered' ('composite') wood wastes. The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in 'engineered' wood wastes as compared with 'raw' wood wastes; and relatively high energy content values of 'engineered' wood wastes (ranging on the whole from 3675more » to 5105 kcal kg{sup -1} for HHV, and from 3304 to 4634 kcal kg{sup -1} for LHV). The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in 'engineered' wood burning tests of pyrroles and amines, as well as the additional presence (as compared with 'raw' wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon. Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in 'engineered' wood burning tests as compared with 'raw' wood burning test; and considerable generation of the respirable PM{sub 1} fraction during incomplete industrial wood burning.« less

  18. Characterizing the adoption of low-grade hardwood lumber by the secondary wood processing industry

    Treesearch

    Robert L. Smith; Wibke Pohle; Philip Araman; Dan Cumbo

    2004-01-01

    This study investigated the adoption of low-grade lumber in the secondary hardwood industry. Factors influencing decisions regarding the utilization of low-grade lumber were identified and value-added opportunities to increase the use of low-grade lumber among manufacturers currently using higher grades were evaluated. Data were collected via a nationwide mail survey...

  19. Forest products industries of the southern Middle-Atlantic states, 1985 - 1986

    Treesearch

    Eric H. Wharton; Kevin Mullarkey; Kevin Mullarkey

    1993-01-01

    Evaluates regional timber output of Maryland, Delaware, and New Jersey. Results are based on a survey of primary processing mills located in these states and of mills in other states that used wood from the region. Contains statistics on industrial timber production and mill receipts and the production and final end use of manufacturing residues. Comparisons are made...

  20. Latin America Report.

    DTIC Science & Technology

    1983-08-15

    the tourism industry , the Central Bank said today. But bank Governor Dr. Courtney Blackman told a news conference that it was still too early to say...8217 . : Tjhese non^traditional products include proc- essed food , beverage , tobacco, chemicals and a.’ variety of light manufacture^ At...agro- industry , and food processing: furniture arid wood,_.products; autoi. motive parts and electrical andelectronic.products as of 1982. It is

  1. Nebraska timber industry--an assessment of timber product output and use, 2000.

    Treesearch

    William H. IV Reading; Dennis M. Adams

    2002-01-01

    Discusses recent Nebraska forest industry trends; and production and receipts of industrial roundwood by product, species, and county in 2000. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of mill residues.

  2. Wood-plastic composites in the United States : the interfacing of two industries

    Treesearch

    Craig Clemons

    2002-01-01

    The term wood-plastic composites refers to any composites that contain wood (of any form) and thermosets or thermoplastics. Thermosets are plastics that, once cured, cannot be melted by reheating. These include resins such as epoxies and phenolics, plastics with which the forest products industry is most familiar. Thermoplastics are plastics that can be repeatedly...

  3. Wood-based panel plant locations and timber availability in selected U.S. states

    Treesearch

    T. McKeever; H. N. Spelter

    1998-01-01

    This report lists wood-based panel industry plant locations, production capacities, timber inventories, and wood costs for 24 U.S. states. Industry sectors covered include medium-density fiberboard, particleboard, softwood plywood, and oriented strandboard. Maps of major forest producing states show plant locations and the underlying density of timber stocking by...

  4. Missouri timber industry--an assessment of timber product output and use, 1994.

    Treesearch

    Ronald J. Piva; Shelby G. Jones

    1997-01-01

    Discusses recent Missouri forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, cooperage bolts, charcoal, and other products in 1994. Compares findings with those from earlier surveys. Reports on the quantity, type, and disposition of wood and bark residues generated by the primary wood-using industry.

  5. Analysis of electricity consumption: a study in the wood products industry

    Treesearch

    Henry Quesada-Pineda; Jan Wiedenbeck; Brian Bond

    2016-01-01

    This paper evaluates the effect of industry segment, year, and US region on electricity consumption per employee, per dollar sales, and per square foot of plant area for wood products industries. Data was extracted from the Industrial Assessment Center (IAC) database and imported into MS Excel. The extracted dataset was examined for outliers and abnormalities with...

  6. Metrication of the United States Lumber Industry and Its Effects on Wood Consuming Industrial Education Courses.

    ERIC Educational Resources Information Center

    Craemer, Peter J.

    A study investigated the direction United States lumber industries are moving concerning the implementation of the metric system and what implications this has concerning wood consuming industrial education courses. The procedure included a literature review and investigating the major producers of softwood dimensional lumber by a detailed survey…

  7. Idaho's forest products industry and timber harvest, 2011

    Treesearch

    Eric A. Simmons; Steven W. Hayes; Todd A. Morgan; Charles E. Keegan; Chris Witt

    2014-01-01

    This report traces the flow of Idaho’s 2011 timber harvest through the primary industries; provides a description of the structure, capacity, and condition of Idaho’s industry; and quantifies volumes and uses of wood fiber. Historical wood products industry trends are discussed, as well as changes in harvest, production, employment, and sales.

  8. California's forest products industry: a descriptive analysis.

    Treesearch

    Todd A. Morgan; Charles E. Keegan; Thale Dillon; Alfred L. Chase; Jeremy S. Fried; Marc N. Weber

    2004-01-01

    This report traces the flow of California’s 2000 timber harvest through the wood-using industries; provides a description of the structure, operations, and condition of California’s primary forest products industry; and briefly summarizes timber inventory and growth. Historical wood products industry changes are discussed, as well as trends in harvest, production, and...

  9. Wood Use in the U.S. Pallet and Container Industry: 1995

    Treesearch

    Vijay S. Reddy; Robert J. Bush; Matthew S. Bumgardner; James L. Chamberlain; Philip A. Araman

    1997-01-01

    This report from the Center for Forest Products Marketing and Management at Virginia Tech provides results of a study ofwood material use in the pallet and container industry (Standard Industrial Classification codes 2441, 2448, and 2449). The report furnishes estimates of industry-wide use ofvarious wood materials (i.e., solid hardwood, solid softwood,oriented strand...

  10. Minnesota timber industry -- an assessment of timber product output and use, 1997.

    Treesearch

    William H. IV Reading; John Krantz

    2002-01-01

    Discusses recent Minnesota forest industry trends as well as production and receipts of industrial roundwood by product, species, and county in 1997. Reports on logging residue, on wood and bark residue generated at primary wood using mills, and on disposition of mill residues.

  11. Kansas timber industry--an assessment of timber product output and use, 2003

    Treesearch

    William H., IV Reading; David L. Bruton

    2007-01-01

    Discusses recent forest industry trends in Kansas; reports production and receipts of industrial roundwood by product, species, and county in 2003. Also reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of mill residues.

  12. Kansas timber industry--an assessment of timber product output and use, 1998

    Treesearch

    William H. Reading; Robert L. Atchison

    2001-01-01

    Discusses recent Kansas forest industry trends; reports production and receipts of industrial roundwood by product, species, and county in 1998. Also reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of mill residues.

  13. Minnesota timber industry--an assessment of timber product output and use, 2004

    Treesearch

    William H., IV. Reading; Keith Jacobson

    2008-01-01

    Discusses recent forest industry trends in Minnesota; reports production and receipts of industrial roundwood by product, species, and county in 2004. Also reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of mills residue.

  14. Toxic emissions during co-combustion of biomass-waste wood-lignite blends in an industrial boiler.

    PubMed

    Samaras, P; Skodras, G; Sakellaropoulos, G P; Blumenstock, M; Schramm, K W; Kettrup, A

    2001-01-01

    The objectives of this work were to study the PCDD/F emissions during the co-combustion of waste wood/coal co-combustion in an industrial boiler and to determine the relation of the toxic emissions to the fuel properties. Co-combustion experiments were performed in a 13.8 MWthermal industrial moving grate combustor. The fuels which were examined in this study included Greek lignite, natural uncontaminated wood, power poles and medium density fibers (MDFs) which were by-products of the plant production process. Fuel blends were prepared by mixing single components in various concentrations. PCDD/F emissions were collected during experimental runs and were analyzed according to standard methods. Low PCDD/F emissions were obtained during the co-combustion tests, lower than the limit value of 0.1 ng TEQ/Nm3. The lowest values were observed during the combustion of fuel blends containing MDF, possibly due to the inhibitory action of some of the N-containing MDF ingredients, such as urea. No direct correlation was found between the PCDD/F and the copper emissions, while examination of the PCDD/F homologue patterns revealed the predominance of the lower chlorinated isomers over the higher ones.

  15. Advanced system demonstration for utilization of biomass as an energy source. Technical Appendix J: alternatives studies. Environmental report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McCollom, M.

    1979-01-01

    A comprehensive review of a wide range of alternatives to the proposed action, the commercial demonstration of an industrial cogenerating facility fired with wood fuels is provided. An extensive effort has been devoted to the evaluation of all reasonable alternatives to this project. A number of possible actions were also briefly considered, but, for various reasons, they were found not to be appropriate at present for a commercial-scale demonstration of an alternative energy source. The critical characteristics of the wood-fueled commercial demonstration project at Westbrook are considered to be: industrial cogeneration of power; the production of 510,000 pounds per hourmore » of industrial process steam; the production of approximately twenty-five megawatts of electric generating capacity, some of which would be available to a public utility in southern Maine; and the consumption of 2,000 tons of wood fuel per day. Each of the alternatives examined in this appendix offers a different option for one or several of the characteristics of the project listed above. As a whole, the appendix describes the range of possible actions that the US Department of Energy and its contractors have considered.« less

  16. Wisconsin timber industry: an assessment of timber product output and use in 2003

    Treesearch

    William H., IV Reading; James W. Whipple

    2007-01-01

    Discusses recent forest industry trends in Wisconsin; reports production and receipts of industrial roundwood by product, species, and county in 2003. Also reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of mill residues.

  17. Used Pallets as a Source of Pellet Fuel: Current Industry Status

    Treesearch

    P.B. Aruna; Jan G. Laarman; Philip A. Araman; Edward Coulter; Frederick Cubbage

    1997-01-01

    U.S. companies discard approximately 4 billion board feet per year of wood pallets and containers. Manufacturing fuel pellets from this wasted wood may be an alternative to disposal. This study traces the development of biomass energy and the wood pellet industry in the United States and considers the production aspects of making pellets from used pallets. In addition...

  18. The Current Status and Possible Trends in Teaching Industrial Arts Wood Information at Teacher Education Institutions.

    ERIC Educational Resources Information Center

    Coleman, Jay Mario

    To investigate the present status of the wood area in selected teacher education institutions and to discover possible trends which might be useful in improving the college wood programs, a questionnaire was developed and sent to 122 industrial arts instructors, and the results were compared on a percentage basis. Specific findings were that: (1)…

  19. Quality control troubleshooting tools for the mill floor

    Treesearch

    John Dramm

    2000-01-01

    Statistical Process Control (SPC) provides effective tools for improving process quality in the forest products industry resulting in reduced costs and improved productivity. Implementing SPC helps identify and locate problems that occur in wood products manufacturing. SPC tools achieve their real value when applied on the mill floor for monitoring and troubleshooting...

  20. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hutton, D.

    The reasons for preservative treatment of cooling tower wood are reviewed along with a summary of which types of treatment are available, how they are applied, and a comparison of materials and processes. Industries often specify minimum quality preservatives for their cooling towers without understanding the loss of strength caused by decay and the economic losses due to a cooling tower failure and lost production. Wood is subject to both chemical (surface delignification and iron rot) and biological (soft rot) attack. A successful preservative treatment that protects against both must have retention and penetration qualities. Research efforts are examining themore » toxicity and environmental impacts of preservatives and exploring the possibility of chemically modifying wood. (DCK)« less

  1. Chapter 6: Wood energy and competing wood product markers

    Treesearch

    Kenneth E. Skog; Robert C. Abt; Karen Abt

    2014-01-01

    Understanding the effect of expanding wood energy markets is important to all wood-dependent industries and to policymakers debating the implementation of public programs to support the expansion of wood energy generation. A key factor in determining the feasibility of wood energy projects (e.g. wood boiler or pellet plant) is the long-term (i.e. 20-30year) supply...

  2. Wood Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    ERIC Educational Resources Information Center

    Claus, Robert; And Others

    This course guide for a wood technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

  3. Maine timber industries - a periodic assessment of timber output

    Treesearch

    Robert L., Jr. Nevel; Peter R. Lammert; Richard H. Widmann

    1985-01-01

    This periodic evaluation of statewide industrial timber output is based on a survey of the primary wood manufacturing plants located in Maine in 1981. It contains statistics on industrial timber harvest and plant wood reciepts and on the production and disposition of the manufacturing residues for the year. The 438.7 million ft? (12.4 million m?) of industrial...

  4. Cyclic polyalcohols: fingerprints to identify the botanical origin of natural woods used in wine aging.

    PubMed

    Alañón, M Elena; Díaz-Maroto, M Consuelo; Díaz-Maroto, Ignacio J; Vila-Lameiro, Pablo; Pérez-Coello, M Soledad

    2011-02-23

    Cyclic polyalcohol composition of 80 natural wood samples from different botanical species, with the majority of them used in the oenology industry for aging purposes, has been studied by gas chromatography-mass spectrometry (GC-MS) after its conversion into their trimethylsilyloxime derivatives. Each botanical species showed a different and specific cyclic polyalcohol profile. Oak wood samples were characterized by the richness in deoxyinositols, especially proto-quercitol. Meanwhile, other botanical species showed a very low content of cyclic polyalcohols. The qualitative and quantitative study of cyclic polyalcohols was a useful tool to characterize and differentiate woods of different botanical origin to guarantee the authenticity of chips used in the wine-aging process. Monosaccharide composition was also analyzed, showing some quantitative differences among species, but cyclic polyalcohols were the compounds that revealed the main differentiation power.

  5. Delignified and Densified Cellulose Bulk Materials with Excellent Tensile Properties for Sustainable Engineering.

    PubMed

    Frey, Marion; Widner, Daniel; Segmehl, Jana S; Casdorff, Kirstin; Keplinger, Tobias; Burgert, Ingo

    2018-02-07

    Today's materials research aims at excellent mechanical performance in combination with advanced functionality. In this regard, great progress has been made in tailoring the materials by assembly processes in bottom-up approaches. In the field of wood-derived materials, nanocellulose research has gained increasing attention, and materials with advanced properties were developed. However, there are still unresolved issues concerning upscaling for large-scale applications. Alternatively, the sophisticated hierarchical scaffold of wood can be utilized in a top-down approach to upscale functionalization, and one can profit at the same time from its renewable nature, CO 2 storing capacity, light weight, and good mechanical performance. Nevertheless, for bulk wood materials, a wider multipurpose industrial use is so far impeded by concerns regarding durability, natural heterogeneity as well as limitations in terms of functionalization, processing, and shaping. Here, we present a novel cellulose bulk material concept based on delignification and densification of wood resulting in a high-performance material. A delignification process using hydrogen peroxide and acetic acid was optimized to delignify the entire bulk wooden blocks and to retain the highly beneficial structural directionality of wood. In a subsequent step, these cellulosic blocks were densified in a process combining compression and lateral shear to gain a very compact cellulosic material with entangled fibers while retaining unidirectional fiber orientation. The cellulose bulk materials obtained by different densification protocols were structurally, chemically, and mechanically characterized revealing superior tensile properties compared to native wood. Furthermore, after delignification, the cellulose bulk material can be easily formed into different shapes, and the delignification facilitates functionalization of the bioscaffold.

  6. Lumber Cost Minimization through Optimum Grade-Mix Selection

    Treesearch

    Xiaoqiu Zuo; Urs Buehlmann; R. Edward Thomas; R. Edward Thomas

    2003-01-01

    Rough mills process kiln-dried lumber into components for the furniture and wood products industries, Lumber is a significant portion of total rough mill costs and lumber quality can have a serious impact on mill productivity. Lower quality lumber is less expensive yet is harder to process. Higher quality lumber is more expensive yet easier to process. The problem of...

  7. Computer model for economic study of unbleached kraft paperboard production

    Treesearch

    Peter J. Ince

    1984-01-01

    Unbleached kraft paperboard is produced from wood fiber in an industrial papermaking process. A highly specific and detailed model of the process is presented. The model is also presented as a working computer program. A user of the computer program will provide data on physical parameters of the process and on prices of material inputs and outputs. The program is then...

  8. New Model Provides Estimates for Global Disease Burdens from Air Pollution

    EPA Pesticide Factsheets

    Air pollution has become a part of modern living. Fine PM2.5 air pollution, caused by things like automobiles, power plants, wood burning and industrial processes has been linked to cardiovascular disease, lung cancer and other diseases.

  9. Competitiveness of U.S. wood furniture manufacturers - Lessons learned from the softwood moulding industry

    Treesearch

    Al Schuler; Russ Taylor; Philip A. Araman

    2001-01-01

    The furniture industry in the United States has been losing market share to imports for the past two decades. This article focuses on the market segment where most of the loss has occurred: the important wood household (non-upholstered) sector (SIC code 2511). In the upholstered furniture sector, exports are still larger than imports. But the wood household furniture...

  10. Recycling Growth Reducing Pallet Industry's Need for New Wood

    Treesearch

    Robert J. Bush; Philip A. Araman

    1997-01-01

    This is the second part of a two-part article. In 1994, the authors reported in the Pallet Enterprise on their study of new and recovered wood use for pallets and containers. In part one of this article, published in September's Pallet Enterprise, they reported on the results of a new survey in 1996 of new wood use by the pallet and container industry, comparing...

  11. Potential Effects of the Fuelwood Market on Wood-using Industries in Northern New England and New York

    Treesearch

    Susan B. Remington; Paul E. Sendak; Paul E. Sendak

    1984-01-01

    The increased use of fuelwood in northern New England and New York has raised concern about future supplies of manufactured wood products. Direct effects were measured by estimating the competitive advantages of the kraft pulp, waferboard, and oriented strand board industries in purchasing wood. lncreased stumpage prices in the region would have the greatest impact on...

  12. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Barre, J.S.; Van Vleet, E.S.

    The stone crab fishery is one of the most important commercial fishing industries in Florida. Since stone crabs are generally caught and harvested by trapping, trap construction and longevity are crucial to the success of the industry. For years, stone crab fishermen have been fishing with wooden traps. Over time, traps become infested with wood-boring animals such as shipworms and isopods, leading to the destruction of the trap. Various wood treatments have been applied to keep wood-borers from infesting the traps in an attempt to increase their longevity and reduce fishing costs. For the past several years, stone crab fishermenmore » have been using a copper-based substance called Fungitrol[sup R] with diesel fuel as a carrier to inhibit wood-borers. Fungitrol (Huls America) is a Cu-naphthenate fungicide containing 8% Cu and is normally used to protect fibrous substrates. Initially, most fishermen dip the wood for their traps in a Fungitrol:diesel fuel mixture (1:10) for anywhere from a few minutes up to 10 days. The traps are then constructed from the treated wood and are allowed to sit outside for up to 5 months before using them for crabbing. In subsequent seasons, the traps are dipped for only 1-3 minutes, then are allowed to sit outside until the opening of the season. The concern with using diesel fuel as a carrier in the dipping process is that this refined petroleum product has been found to be more toxic to marine animal s than many crude oils. Hydrocarbons found in other petroleum products (including fuel oils and crude oils) have been shown to have both lethal and sublethal effects on crustaceans. Various studies have been conducted on wood preservatives and the changes that occur in treated wood with prolonged exposure to water. This study investigates many of the same characteristics of a leachate from marine woods as do the others; however, this particular leachate, diesel fuel, has not been studied until now. 10 refs., 2 figs., 1 tab.« less

  13. The Four Corners timber harvest and forest products industry, 2007

    Treesearch

    Steven W. Hayes; Todd A. Morgan; Erik C. Berg; Jean M. Daniels; Mike Thompson

    2012-01-01

    This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2007, describes the composition and operations of the region's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as...

  14. Control of Atmospheric Emissions in the Wood Pulping Industry, Volume 3.

    ERIC Educational Resources Information Center

    Hendrickson, E. R.; And Others

    Volume 3 contains chapters 9 through 13 of the final report on the control of atmospheric emissions in the wood pulping industry. These chapters deal with the following topics: sampling and analytical techniques; on-going research related to reduction of emissions; research and development recommendations; current industry investment and operating…

  15. Iowa timber industry--an assessment of timber product output and use, 2000.

    Treesearch

    Ronald J. Piva; Dennis D. Michel

    2003-01-01

    Discusses recent Iowa forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, and pulpwood in 2000. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood using mills and on disposition of mill residues.

  16. Cabinetmaker: Apprenticeship Course Outline. Apprenticeship and Industry Training. 3610.3

    ERIC Educational Resources Information Center

    Alberta Advanced Education and Technology, 2010

    2010-01-01

    The graduate of the Cabinetmaker apprenticeship program is a certified journeyperson who will: (1)know the characteristics of wood, wood products or substitutes used in industrial woodworking; (2) be proficient with the safe use of hand tools, powered machines and equipment used in industrial woodworking; (3) read and interpret plans and…

  17. Indiana timber industry--an assessment of timber product output and use, 2000

    Treesearch

    Ronald J. Piva; Joey Gallion

    2003-01-01

    Discusses recent Indiana forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, and pulpwood in 2000. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood-using mills and on disposition of mill residues.

  18. South Dakota timber industry--an assessment of timber product output and use, 1999.

    Treesearch

    Ronald J. Piva; Gregory J. Josten

    2003-01-01

    Discusses recent South Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs in 1999. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood-using mills and on disposition of mill residues.

  19. Domestic competitiveness in secondary wood industries

    Treesearch

    Matthew Bumgardner; Urs Buehlmann; Albert Schuler; Rich Christianson

    2004-01-01

    As imports capture a substantial portion of the domestic wood furniture market, there is much speculation and concern as to the future of this and related industries. This study sought to obtain an industry perspective of trends in domestic manufacturing and importing, and to identify factors that might enhance domestic competitiveness. A mail survey was conducted...

  20. North Dakota timber industry: an assessment of timber product output and use, 2009

    Treesearch

    David E. Haugen; Robert A. Harsel

    2013-01-01

    Presents recent North Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  1. Kansas timber industry: an assessment of timber product output and use, 2009

    Treesearch

    David E. Haugen

    2013-01-01

    Presents recent Kansas forest industry trends; production and receipts of industrial roundwood; and production of saw logs and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  2. Wisconsin timber industry: an assessment of timber product output and use, 2008

    Treesearch

    David E. Haugen

    2013-01-01

    Presents recent Wisconsin forest industry trends; production and receipts of industrial roundwood; and production of saw logs, and other products in 2008. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  3. Indiana timber industry--an assessment of timber product output and use, 2005

    Treesearch

    Ronald J. Piva; Joey Gallion

    2007-01-01

    Presents recent Indiana forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, and pulpwood in 2005. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  4. The Four Corners timber harvest and forest products industry, 2002

    Treesearch

    Todd A. Morgan; Thale Dillon; Charles E. Keegan; Alfred L. Chase; Mike T. Thompson

    2006-01-01

    This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2002, describes the composition and operations of the region's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as...

  5. Wood material use in the U.S. cabinet industry 1999 to 2001

    Treesearch

    David Olah; Robert Smith; Bruce. Hansen

    2003-01-01

    Fax and mail questionnaires were used to estimate consumption of wood-based products by the U.S. cabinet industry and evaluate current management issues affecting the cabinet industry. Results indicated that the cabinet industry used an estimated 484 million board feet (MMBF) of hardwood lumber. Nearly 95 percent of the hardwood lumber purchases were grade No. 1 Common...

  6. Research on the use of particles coming from almond husk as fillers for vinyl plastisols to manufacture hollow pieces with similar surface finishing than wood by using a rotational moulding process

    NASA Astrophysics Data System (ADS)

    Crespo Amoros, Jose Enrique

    PVC pastes or plasticized PVC offer great possibilities in the industrial field in which this research work has been developed since they show great relevance in plastic processing. On one hand, it is important to study these materials from different points of view: quality improvement, wide range of performance, high versatility, low costs,.... On the other hand, most of the industrial fields that usually employ these polymeric materials are characterized by developing products on which aesthetic considerations and surface finishing acquire special relevance. These industrial fields include all those on which new designs require complex shapes and new and novelty surface finishing such as interior design (furniture, wood products,...) toys industry, houseware, shoe industry,.... The main aim of this work is to improve the use of PVC plastisols in these industrial fields by optimizing formulations with new additives (low toxicity plasticizers) and fillers (lignocellulosic wastes) to obtain new materials that minimize damages to environment. In this work, we have developed new plastisol formulations based on the use of low toxicity plasticizers to obtain more ecological plastisols. We have used a biodegradable plasticizer DINCH which is a derivative of a dicarboxilate as substitute of traditional plasticizers based on phthalates. As we are working with relatively new plasticizers (specially at industrial level) we have performed a whole study of its properties by using different experimental analysis techniques such as differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamical-mechanical analysis (DMA) and espectrofotometric techniques (visible and infrared). Furthermore a complete mechanical characterization has been carried out to analyze the most important parameters that influence on materials properties such as processing parameters (temperature and time) and plastisol formulations (mainly plasticizer content). We have also performed a comparative study regarding the results obtained with the most used plasticizer at industrial level, di-octyl phthalate (DOP). After this characterization, a study on the addition of cellulosic fillers was carried out to obtain materials with similar surface finishing than wood products. We used three different lignocellulosic fillers coming from wastes: almond husk residues since these wastes are quite abundant in our influence zone, rice husk and sawdust residues since they are produced everywhere in high amounts. It was studied the influence of the morphology and particle size on the final properties of the prepared mixtures to optimize formulations. These new plastisol formulations allow obtaining new materials in a wide range of mechanical properties, easy processing, interesting surface finishing and partially biodegradable, more careful with environment.

  7. Executive reflects on progress in the oil and gas industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Popov, S.

    1997-08-01

    This paper reflects on the UK oil and gas industry`s international globalization and progress from the perspective of a UK industry executive. Sir Ian Wood, managing director of John Wood Group plc, outlined past and future industry developments during a 1997 Offshore Technology Conference speech. He concludes that the UK supply and service industry is now fully involved in the international arena, and hopes to play a significant role in the exciting oil and gas developments in the Gulf of Mexico and frontiers worldwide.

  8. Machine Vision Technology for the Forest Products Industry

    Treesearch

    Richard W. Conners; D.Earl Kline; Philip A. Araman; Thomas T. Drayer

    1997-01-01

    From forest to finished product, wood is moved from one processing stage to the next, subject to the decisions of individuals along the way. While this process has worked for hundreds of years, the technology exists today to provide more complete information to the decision makers. Virginia Tech has developed this technology, creating a machine vision prototype for...

  9. Laser processing of phenolic wood substitutes

    NASA Astrophysics Data System (ADS)

    Quintero, F.; Riveiro, A.; Lusquiños, F.; Penide, J.; Arias-González, F.; del Val, J.; Comesaña, R.; Boutinguiza, M.; Pou, J.

    2013-11-01

    Phenolic resin boards (PRB) are wood substitutes that comprises of a thick core exclusively made of phenolic resin covered by a thin sheet of melamine resin imitating the aspect of natural wood. The use of these materials in furniture and in construction industry has proliferated during last years. Boards made of phenolic resins are dense, hard and very difficult to cut using band saws, disc saws, or milling cutters. Nevertheless, these difficulties can be overcome by means of laser cutting, which is one of the most firmly established techniques for separating materials. This is due to the great advantages of this technique over traditional cutting methods, such as its versatility and flexibility that allow effective cutting. Nevertheless, charring of the cut edge surface caused by laser induced thermal degradation degrades the cut quality under non-optimized processing conditions. In this research work the viability and quality of CO2 laser cutting process of phenolic resin boards and wood particleboard panels has been evaluated. The present work validates the cut of phenolic resin boards by CO2 lasers using a high laser power and elevated cutting speeds. Moreover, this process involves a serious health hazard since the combustion and decomposition of wood may produce fumes and vapors, which can be toxic and carcinogenic according to the International Chemical Safety Cards (ICSC). Therefore, this work was complemented by the assessment of the potential toxicity of the condensed residues formed on the cut edges, and assessment of the chemistry of the generated fumes by chromatography.

  10. Michigan timber industry—an assessment of timber product output and use, 2008

    Treesearch

    David E. Haugen; Brian F. Walters; Ronald J. Piva; David Neumann

    2014-01-01

    Presents recent Michigan forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2008. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  11. The timber industries of New Jersey and Delaware

    Treesearch

    James T. Bones

    1973-01-01

    Results of a field canvass of all known primary wood manufacturers that operated in Delaware and New Jersey in 1970. The industrial wood statistics are compared with previous surveys and important trends in industry development are noted. Total roundwood output was down 31 percent in Delaware since 1956 and down 43 percent in New Jersey since 1955.

  12. Ohio timber industries - a periodic assessment of timber output

    Treesearch

    Robert L., Jr. Nevel; Robert B. Redett

    1980-01-01

    A periodic evaluation of industrial timber output in Ohio based on a statewide survey of the primary wood manufacturing plants. Contains statistics on the industrial timber harvest and plant wood receipts in 1978, and the production and disposition of the manufacturing residues that resulted. The 74 million cubic feet (ft³) or 2.2 million cubic meters (m...

  13. Maryland timber industry: an assessment of timber product output and use, 2008

    Treesearch

    Brian F. Walters; Daniel R. Rider; Ronald J. Piva

    2012-01-01

    Presents recent Maryland forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2008. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  14. Michigan timber industry: an assessment of timber product output and use, 2006

    Treesearch

    Ronald J. Piva; Anthony K. Weatherspoon

    2010-01-01

    Presents recent Michigan forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2006. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  15. Missouri timber industry: an assessment of timber product output and use, 2009

    Treesearch

    Ronald J. Piva; Thomas B. Treiman

    2012-01-01

    Presents recent Missouri forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  16. Missouri timber industry - an assessment of timber product output and use, 2003

    Treesearch

    Thomas B. Treiman; Ronald J. Piva

    2005-01-01

    Discusses recent Missouri forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, cooperage, and other timber products in 2003. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood-using mills and on disposition of mill...

  17. Minnesota timber industry: an assessment of timber product output and use, 2007

    Treesearch

    David E. Haugen; Keith. Jacobson

    2012-01-01

    Presents recent Minnesota forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2007. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  18. Missouri timber industry--an assessment of timber product output and use, 2000.

    Treesearch

    Ronald J. Piva; Thomas B. Treiman

    2003-01-01

    Discusses recent Missouri forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, cooperage, and other timber products in 2000. Reports in logging residue generated from other timber harvest operations. Also reports on wood and bark residue generated at primary wood-using mills and on disposition of...

  19. Indiana timber industry: an assessment of timber product output and use, 2008

    Treesearch

    Brian F. Walters; Jeff Settle; Ronald J. Piva

    2012-01-01

    Presents recent Indiana forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2008. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  20. Nebraska timber Industry--an assessment of timber product output and use, 2006

    Treesearch

    Ronald J. Piva; Dennis M. Adams

    2008-01-01

    Presents recent Nebraska forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, excelsior/shavings, and other products in 2006. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  1. South Dakota timber industry: an assessment of timber product output and use, 2009

    Treesearch

    Ronald J. Piva; Gregory J. Josten

    2013-01-01

    Presents recent South Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  2. Birefringence of wood at terahertz frequencies

    NASA Astrophysics Data System (ADS)

    Todoruk, Tara M.; Schneider, Jon; Hartley, Ian D.; Reid, Matthew

    2008-06-01

    Fibre content of solid wood plays an important role in the wood products industry in terms of value. Additionally, fibre structure in composite wood products such as Oriented Strand Board (OSB) and paper products plays an important role in terms of strength properties. The effect of moisture content on wood properties is important in the manufacturing process and final product performance, and therefore its effect on the birefringence is of considerable interest. Since solid wood exhibits strong birefringence at terahertz frequencies, there may be potential applications of terahertz spectroscopy to fibre content and structure sensing. There are two potential sources for this strong birefringence: (i) form birefringence resulting from the porous structure of solid wood and (ii) intrinsic birefringence resulting from the dielectric properties of the material itself. In this report, the variability of birefringence within and between species, the dependence of the birefringence on moisture content and the relative contributions from form and intrinsic birefringence are examined. In order to clarify the role of these contributions to the measured birefringence, polarized terahertz reflection spectroscopy is examined and compared to the results obtained in a transmission geometry. Comparison of the birefringence measured in transmission and reflection geometries suggests that form birefringence may dominate.

  3. Hydrothermal pretreatment of wood by mild steam explosion and hot water extraction.

    PubMed

    Wojtasz-Mucha, Joanna; Hasani, Merima; Theliander, Hans

    2017-10-01

    The aim of this work was to compare the two most common hydrothermal pre-treatments for wood - mild steam explosion and hot water extraction - both with the prospect of enabling extraction of hemicelluloses and facilitating further processing. Although both involve autohydrolysis of the lignocellulosic tissue, they are performed under different conditions: the most prominent difference is the rapid, disintegrating, discharge employed in the steam explosion opening up the structure. In this comparative study, the emphasis was placed on local composition of the pre-treated wood chips (of industrially relevant size). The results show that short hot water extraction treatments lead to significant variations in the local composition within the wood chips, while steam explosion accomplishes a comparably more even removal of hemicelluloses due to the advective mass transport during the explosion step. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Ethanol production from residual wood chips of cellulose industry: acid pretreatment investigation, hemicellulosic hydrolysate fermentation, and remaining solid fraction fermentation by SSF process.

    PubMed

    Silva, Neumara Luci Conceição; Betancur, Gabriel Jaime Vargas; Vasquez, Mariana Peñuela; Gomes, Edelvio de Barros; Pereira, Nei

    2011-04-01

    Current research indicates the ethanol fuel production from lignocellulosic materials, such as residual wood chips from the cellulose industry, as new emerging technology. This work aimed at evaluating the ethanol production from hemicellulose of eucalyptus chips by diluted acid pretreatment and the subsequent fermentation of the generated hydrolysate by a flocculating strain of Pichia stipitis. The remaining solid fraction generated after pretreatment was subjected to enzymatic hydrolysis, which was carried out simultaneously with glucose fermentation [saccharification and fermentation (SSF) process] using a strain of Saccharomyces cerevisiae. The acid pretreatment was evaluated using a central composite design for sulfuric acid concentration (1.0-4.0 v/v) and solid to liquid ratio (1:2-1:4, grams to milliliter) as independent variables. A maximum xylose concentration of 50 g/L was obtained in the hemicellulosic hydrolysate. The fermentation of hemicellulosic hydrolysate and the SSF process were performed in bioreactors and the final ethanol concentrations of 15.3 g/L and 28.7 g/L were obtained, respectively.

  5. EVALUATION OF BIOAEROSOL EXPOSURES DURING CONDITIONING OF BIOFILTER ORGANIC MEDIA BEDS

    EPA Science Inventory

    Biological media air filters (biofilters) are currently being used for the treatment of inorganic and organic gasses from sewage treatment plants, industrial processes, and remediation systems. The media may be organic material such as comost, wood chips, or synthetic plastic med...

  6. Method for Improving Separation of Carbohydrates from Wood Pulping Liquors and Wood or Biomass Hydrolysis Liquors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Compere, A L; Marcoccia, B S; Elliott, J

    2012-08-31

    Work with industrial partners to perform the studies needed to commercialize U.S. patent 7,699,958 for separation of carbohydrates from wood pulping liquors and wood or biomass hydrolysis liquors. These include: 1) selection of the best pulp mill liquor withdrawal sites, 2) additional purification or enzyme hydrolysis required to obtain acceptable sugar feedstocks, 3) and work with partners to optimize the stream and purification methods to provide acceptable feedstocks for algal fuels and industrial chemicals production, and 4) preparation of samples large enough for testing by downstream partners.

  7. CCA-TREATED WOOD DISPOSED IN LANDFILLS AND LIFE-CYCLE TRADE-OFFS WITH WASTE-TO-ENERGY AND MSW LANDFILL DISPOSAL

    EPA Science Inventory

    Chromated copper arsenate (CCA) treated wood is a preservative treated wood construction product that grew in use in the 1970s for both residential and industrial applications. In the U.S. CCA-treated wood is disposed primarily within landfills, however some of the wood is combu...

  8. Relationship of wood surface energy to surface composition

    Treesearch

    Feipeng P. Liu; Timothy G. Rials; John Simonsen

    1998-01-01

    The wood cell wall is composed of cellulose, lignin, hemicelluloses, and extractives. Thus, the surface energy of the wood material must be some combination of the surface energies of these components. The influence of extractives on wood surface chemistry can be important in diverse industrial applications, such as coating, pulping, and wood-based composites. In this...

  9. What is the current state of forest product markets and how will they develop in the future?

    Treesearch

    Ragnar Jonsson; Elias Hurmekoski; Lauri Hetemaki; Jeffrey Prestemon

    2017-01-01

    Forest-based industries – pulp and paper, solid wood products, and a number of downstream value-added wood-based manufacturers – have received limited attention in the pursuit of a successful implementation of EU and national bioeconomy strategies. According to Eurostat, the pulp and paper and solid wood products industries accounted for about 4.4% (€277 billion) of...

  10. Wood Dust

    Cancer.gov

    Learn about wood dust, which can raise the risk of cancers of the paranasal sinuses and nasal cavity. High amounts of wood dust are produced in sawmills, and in the furniture-making, cabinet-making, and carpentry industries.

  11. South Dakota timber industry--an assessment of timber product output and use, 2004

    Treesearch

    Ronald J. Piva; Gregory J. Josten; Richard D. Mayko

    2006-01-01

    Discusses recent South Dakota forest industry trends; production and receipts of industrial roundwood; production of saw logs in 2004; and compares 2004 production and receipts with the results of the 1999 timber product output study. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood-...

  12. The timber industries of New Hampshire and Vermont: a periodic assessment of timber output

    Treesearch

    Robert L., Jr. Nevel; Nicolas Engalichev; William C. Gove

    1986-01-01

    This periodic evaluation of statewide industrial timber output is based on canvasses of the primary wood manufacturing plants in New Hampshire and Vermont. The report contains statistics on industrial timber products and plant wood receipts in 1982, and the production and disposition of the manufacturing plant residues that resulted. The 129.4 million cubic feet (3.7...

  13. The Four Corners timber harvest and forest products industry, 2012

    Treesearch

    Colin B. Sorenson; Steven W. Hayes; Todd A. Morgan; Eric A. Simmons; Micah G. Scudder; Chelsea P. McIver; Mike T. Thompson

    2016-01-01

    This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2012, describes the composition and operations of the region’s primary forest products industry, and quantifies volumes and uses of wood fiber. Recent changes in the wood products industry are discussed, as well as trends...

  14. TREATMENT TECHNOLOGY PERFORMANCE AND COST DATA FOR REMEDIATION OF WOOD PRESERVING SITES

    EPA Science Inventory

    Wood preserving has been an industry in North America for more than 100 years. During this time wood preserving facilities have utilized a variety of compounds, including pentachlorophenol (PCP), creosote, and certain metals to extend the useful life of wood products. Past operat...

  15. Study of processes influencing bioavailability of pesticides in wood-soil systems: Effect of different factors.

    PubMed

    Marín-Benito, J M; Herrero-Hernández, E; Rodríguez-Cruz, M S; Arienzo, M; Sánchez-Martín, M J

    2017-05-01

    Lignocellulosic wastes and by-products containing lignin are now available in large amounts from forestry and industrial activities, and could be promising organic materials for the biosorption of pesticides by soils in order to reduce point-source pollution. Adding these materials to soil requires understanding the process of pesticide sorption-desorption by wood-soils, as sorption capacity could increase, with changes in pesticide bioavailability and final fate. The objective of this work was to study the effect that pine and oak wood added to soils had on the sorption/desorption of the pesticides linuron, alachlor, and metalaxyl. Experiments were conducted with two sandy loam and sandy clay soils each amended with two wood doses (5% and 50%) after different incubation times (0, 5 and 12 months). A low wood dose (5%) had no significant impact on the sorption (K f ) of alachlor, but K f increased for linuron (up to 5.4-1.7 times) and metalaxyl (up to 4.4 and 8.6 times) in all wood-soil systems. The results were not significantly different after different incubation times. The desorption results indicated that wood decreases the sorption irreversibility of alachlor, and increases that of linuron and metalaxyl, with a varying effect of the wood-soil incubation time. The addition of a high wood dose to soil (50%) was more significant for increasing the sorption of all the pesticides, and the sorbed amounts remaining after desorption (>49% for linuron, >33% for alachlor and >6% for metalaxyl), although there was no apparent discrimination between the two types of woods. The role of the nature of the organic carbón (K oc values) for sorption was evidenced for alachlor and metalaxyl, but not for linuron. These outcomes are of interest for extending wood application to soil as a barrier for avoiding environmental risk by point-source pollution due to the use and management of pesticides in farming systems. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Sawmill profile : new Forest Products Lab report defines the makeup of North America's softwood sawmill industry

    Treesearch

    Henry Spelter; Matthew Alderman

    2005-01-01

    As of July 2005, the main stream of the softwood lumber industry in the U.S. and Canada consisted of about 1,067sawmills. These sawmills had a combined capacity of 189 million m3 (80 billion BF), employed about 99,000, produced about 172 million m3 (nominal, 73 billion BF) of lumber, and in the process consumed about 280 million m3 of wood.

  17. Modification of lignin for the production of new compounded materials.

    PubMed

    Hüttermann, A; Mai, C; Kharazipour, A

    2001-05-01

    The cell walls of woody plants are compounded materials made by in situ polymerization of a polyphenolic matrix (lignin) into a web of fibers (cellulose), a process that is catalysed by polyphenoloxidases (laccases) or peroxidases. The first attempt to transform the basic strategy of this natural process for use in human craftsmanship was the ancient lacquer method. The sap of the lacquer tree (Rhus verniciflua) contains large amounts of a phenol (urushiol), a polysaccharide and the enzyme laccase. This oil-in-water emulsion solidifies in the presence of oxygen. The Chinese began using this phenomenon for the production of highly creative artwork more than 6,000 years ago. It was the first example of an isolated enzyme being used as a catalyst to create an artificial plastic compound. In order to apply this process to the production of products on an industrial scale, an inexpensive phenol must be used, which is transferred by an enzyme to active radicals that react with different components to form a compounded material. At present, the following approaches have been studied: (1) In situ polymerization of lignin for the production of particle boards. Adhesive cure is based on the oxidative polymerization of lignin using phenoloxidases (laccase) as radical donors. This lignin-based bio-adhesive can be applied under conventional pressing conditions. The resulting particle boards meet German performance standards. By this process, 80% of the petrochemical binders in the wood-composite industry can be replaced by materials from renewable resources. (2) Enzymatic copolymerization of lignin and alkenes. In the presence of organic hydroperoxides, laccase catalyses the reaction between lignin and olefins. Detailed studies on the reaction between lignin and acrylate monomers showed that chemo-enzymatic copolymerization offers the possibility to produce defined lignin-acrylate copolymers. The system allows control of the molecular weights of the products in a way that has not been possible with chemical catalysts. This is a novel attempt to enzymatically induce grafting of polymeric side chains onto the lignin backbone, and it enables the utilization of lignin as part of new engineering materials. (3) Enzymatic activation of the middle-lamella lignin of wood fibers for the production of wood composites. The incubation of wood fibers with a phenol oxidizing enzyme results in oxidative activation of the lignin crust on the fiber surface. When such fibers are pressed together, boards are obtained which meet the German standards for medium-density fiber boards (MDF). The fibers are bound together in a way that comes close to that by which wood fibers are bound together in naturally grown wood. This process will, for the first time, yield wood composites that are produced solely from naturally grown products without any addition of resins.

  18. Potential for structural lumber substitutes

    Treesearch

    Theodore L. Laufenberg

    1985-01-01

    The potential for substitution of structural wood composites into solid-sawn lumber markets is presented from the technological viewpoint. Technological limitations of existing composite processes and products are reviewed in the context of the present laminated veneer lumber (LVL), flakeboard, and fiber/ paper industries. The limits of mechanical property potential...

  19. Emerging Energy Alternatives for the Southeastern States

    NASA Technical Reports Server (NTRS)

    Stefanakos, E. K. (Editor)

    1978-01-01

    The proceedings of the first symposium on emerging energy alternatives for the Southeastern States are presented. Some topics discussed are: (1) solar energy, (2) wood energy, (3) novel energy sources, (4) agricultural and industrial process heat, (5) waste utilization, (6) energy conservation and (7) ocean thermal energy conversion.

  20. Urea modified cottonseed protein adhesive for wood composite products

    USDA-ARS?s Scientific Manuscript database

    Cottonseed protein has the potential to be used as renewable and environmentally friendly adhesives in wood products industry. However, the industry application was limited by its low mechanical properties, low water resistance and viscosity. In this work, urea modified cottonseed protein adhesive w...

  1. Industrial wood productivity in the United States, 1900-1998

    Treesearch

    Peter J. Ince

    2000-01-01

    The productivity of U.S. wood and paper product output in terms of wood input is computed and displayed in graphs. Background tables provide supporting data. The productivity trend parallels trends in the recovered paper utilization rate. Recycling and wood residue use are key factors in productivity gains.

  2. Changes and Trends in the Pallet Industry: Alternative Materials and Industry Structure

    Treesearch

    Robert J. Bush; Philip A. Araman

    1998-01-01

    In the first article of this three-part series we described trends in the use of new wood materials for pallets and containers. The second article described changes in pallet recovery and recycling. In this third article, we describe alternative (i.e., other than solid wood) materials used to manufacture pallets as well as changes in the structure of the industry....

  3. Nanotechnology : implications for the wood preservation industry

    Treesearch

    Carol A. Clausen

    2007-01-01

    Nanotechnology has the potential to greatly impact the wood protection industry through the creation of nanomaterials with unique properties. Nanobiocides may find applications as co-biocides, or may alter treatability properties such as penetration and biocide distribution. Nanocarrier delivery systems may increase the applications for organic biocides through...

  4. Minnesota timber industry--an assessment of timber product output and use, 1990.

    Treesearch

    Ronald L. Hackett; Richard A. Dahlman

    1993-01-01

    Discusses recent Minnesota forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1990. Reports on logging residue, wood and bark residue generated at primary wood-using mills, and disposition of mill residues.

  5. SOURCE SAMPLING FINE PARTICULATE MATTER: WOOD-FIRED INDUSTRIAL BOILER

    EPA Science Inventory

    The report provides a profile for a wood-fired industrial boiler equipped with a multistage electrostatic precipitator control device. Along with the profile of emissions of fine particulate matter of aerodynamic diameter of 2.5 micrometers or less (PM-2.5), data are also provide...

  6. Indiana timber industry--an assessment of timber product output and use.

    Treesearch

    James E. Blyth; Donald H. McGuire; W. Brad Smith

    1987-01-01

    Discusses recent Indiana forest industry trends; production and receipts of saw logs; and production of pulpwood, veneer logs, and other products in 1984. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this residue.

  7. The timber industries of Kentucky, 1986

    Treesearch

    Eric H. Wharton; Stephen C. Kayse; Robert L., Jr. Nevel; Robert L. Nevel

    1992-01-01

    A statistical report based on a survey of primary wood manufacturers using wood from Kentucky. Contains statistics on production and consumption of industrial forest products by species, geographic units, and state; and production and disposition of manufacturing residues. Includes graphics and statistical tables showing current and historical data.

  8. Environment-Conscious Ceramics (Ecoceramics) Technology Received 2001 R&D 100 Award

    NASA Technical Reports Server (NTRS)

    Singh, Mrityunjay

    2002-01-01

    Since the dawn of human civilization, there has been a delicate balance between the use of resources as human frontiers expanded and the need to have a minimum influence on the ecosystem. The first 200 years of the industrial revolution essentially solved the problem of production. However, the massive production of goods also generated tremendous amounts of byproducts and wastes. In the new millennium, to sustain a healthy life in harmony with nature, it will be extremely important for us to develop various materials, products, and processes that minimize any harmful influence on the environment. Environment-conscious ceramics (ecoceramics) are a new class of materials that can be fabricated with renewable resources (wood) and wood waste material (wood sawdust). Wood is a "lignocellulosic" material formed by the photosynthetic reaction within the needles or leaves of trees. The photosynthesis process uses sunlight to take carbon dioxide from air and convert it into oxygen and organic materials. Wood has been known to be one of the best and most intricate engineering materials created by nature and known to mankind. In addition, natural woods of various types are available throughout the world. On the other hand, wood sawdusts are generated in abundant quantities by sawmills. Environment-conscious ceramic materials, fabricated via the pyrolysis and infiltration of natural wood-derived preforms, have tailorable properties with numerous potential applications. The experimental studies conducted to date on the development of materials based on biologically derived structures indicate that these materials behave like ceramic materials manufactured by conventional approaches. These structures have been shown to be quite useful in producing porous or dense materials having various microstructures and compositions.

  9. 78 FR 730 - State Program Requirements; Approval of Application To Administer Partial National Pollutant...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-04

    ...) at facilities whose primary industrial activity is storage of grain, feed seed, fertilizer, and... incidentally store grain, feed seed, fertilizer, and agriculture chemicals to support the primary activity of..., except those related to wood preservation and processing regulated pursuant to 40 CFR part 429 (Timber...

  10. Use of wood in buildings and bridges

    Treesearch

    Russell C. Moody; Anton TenWolde

    1999-01-01

    In North America, most housing and commercial structures built prior to the 20th century used wood as the major structural material. The abundant wood resource formed the basic structure for most houses, commercial buildings, bridges, and utility poles. Today, houses and many light commercial and industrial buildings are made using modern wood structural materials....

  11. Fatty acid-based formulations for wood protection against mold and sapstain

    Treesearch

    Carol A. Clausen; Robert D. Coleman; Vina W. Yang

    2010-01-01

    Safer, highly effective biocides providing long-term protection of mold growth on wood-based materials is of interest to the wood protection industry. Moldicide formulations containing synergistic combinations of ingredients derived from natural sources are commonly recognized as a promising approach for the next generation of wood protectants. Although fatty acid (FA...

  12. Wisconsin timber industry--an assessment of timber product output and use, 1999

    Treesearch

    William H. IV Reading; James W. Whipple

    2003-01-01

    Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood; and production of saw logs, veneer logs, and other timber products in 1999. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of mill residues.

  13. Wisconsin timber industry--an assessment of timber output trends.

    Treesearch

    James E. Blyth; James W. Whipple; Terry Mace; W. Brad Smith

    1985-01-01

    Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of fuelwood and other timber products in 1981. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  14. Michigan timber industry--an assessment of timber product output and use, 1988.

    Treesearch

    W. Brad Smith; Anthony K. Weatherspoon; John Pilon

    1990-01-01

    Discusses recent Michigan forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1988. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  15. Indiana's timber industry--an assessment of timber product output and use, 1995.

    Treesearch

    Ronald L. Hackett; Jeff Settle

    1998-01-01

    Discusses recent Indiana forest industry trends; production and receipts of saw logs, pulpwood, and veneer logs; and production of other timber products in 1995. Reports on harvest residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  16. Fifty-Year Durability Evaluation of Posts Treated with Industrial Wood Preservatives

    Treesearch

    Stan T. Lebow; Patricia Lebow; Bessie Woodward; Grant T. Kirker; Rachel Arango

    2015-01-01

    Long-term durability data are needed to improve service life estimates for treated wood products used as critical structural supports in industrial applications. This article reports the durability of longleaf pine (Pinus palustris) posts pressure treated with ammoniacal copper arsenate (ACA), chromated copper arsenate (CCA), creosote, or...

  17. Wisconsin timber industry--an assessment of timber product output and use, 1988.

    Treesearch

    W. Brad Smith; James W. Whipple

    1990-01-01

    Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1988. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  18. Missouri timber industry--an assessment of timber product output and use.

    Treesearch

    W. Brad. Smith; Shelby Jones

    1990-01-01

    Discusses recent Missouri forest industry trends; production and receipts of saw logs; and production of charcoal, veneer logs, cooperage logs, and other products in 1987. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this residue.

  19. Missouri timber industry--an assessment of timber product output and use, 1991.

    Treesearch

    Ronald L. Hackett; Shelby Jones; Ronald J. Piva

    1993-01-01

    Discusses recent Missouri forest industry trends; production and receipts of saw logs; and production of charcoal, veneer logs, cooperage logs, and other products in 1991. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this residue.

  20. Wisconsin timber industry--an assessment of timber product output and use, 1990.

    Treesearch

    Ronald L. Hackett; James W. Whipple

    1993-01-01

    Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1990. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  1. Wisconsin timber industry--an assessment of timber product output and use, 1996.

    Treesearch

    Ronald L. Hackett; Ronald J. Piva; James W. Whipple

    2002-01-01

    Discusses recent Wisconsin forest industry trends: production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1996. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of mill residues.

  2. Wisconsin timber industry--an assessment of timber product output and use.

    Treesearch

    Ronald L. Hackett; James W. Whipple

    1995-01-01

    Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1992. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  3. Profile of the wood furniture and fixtures industry. EPA Office of Compliance sector notebook project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1995-09-01

    The furniture and fixtures industry encompasses companies that manufacture household, office, store, public building, and restaurant furniture and fixtures. The second section provides background information on the size, geographic distribution, employment, production, sales, and economic condition of the Wood Furniture and Fixtures industry. The type of facilities described within the document are also described in terms of their Standard Industrial Classification (SIC) codes. Additionally, this section contains a list of the largest companies in terms of sales.

  4. MASSAHAKE whole tree harvesting method for pulp raw-material and fuel -- R&D in 1993--1998

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Asplund, D.A.; Ahonen, M.A.

    1993-12-31

    In Finland biofuels and hydropower are the only indigenous fuels available. Peat, wood and wood derived fuels form about 18% of total primary energy requirement. The largest wood and wood fuel user in Finland is wood processing industry, paper, pulp, sawmills. Due to silvicultural activities the growth of forests has developed an instant need for first thinnings. This need is about 12% of total stem wood growth. With conventional harvesting methods this would produce about 8 mill. m{sup 3} pulp raw material and 2 mill. m{sup 3} wood fuel. By using integrated harvesting methods about 12 mill. m{sup 3} pulpmore » raw material and 8 mill. m{sup 3} (about 1, 3 mill. toe) fuel could be produced. At the moment, there is no economically profitable method for harvesting first thinning trees for industrial use or energy production. Hence, there are a few ongoing research projects aiming at solving the question of integrated harvesting. MASSAHAKE chip purification method has been under R&D since 1987. Research with continuous experimental line (capacity 5--10 loose-m{sup 3}) has been done in 1991 and 1992. The research has concentrated on pine whole tree chip treatment, but preliminary tests with birch whole tree chips has been done. The experiment line will be modified for birth whole tree chips during 1993. Based on the research results more than 60% of the whole tree chips can be separated to pulp raw material with < 1% bark content. This amount is 1.5--2 times more than with present technology. The yield of fuel fraction is 2--4 times higher compared to present methods. Fuel fraction is homogeneous and could be used in most furnaces for energy production. By replacing fossil fuels with wood fuel in energy production it is possible to reduce CO{sub 2}-emissions significantly. This paper presents the wood fuel research areas in Finland and technical potential of MASSAHAKE-method including the plant for building a demonstration plant based on this technology.« less

  5. Tropical wood resistance to the West Indian drywood termite Cryptotermes brevis: If termites can't chew….

    PubMed

    Cosme, Lírio; Haro, Marcelo M; Guedes, Nelsa Maria P; Della Lucia, Terezinha Maria C; Guedes, Raul Narciso C

    2018-04-01

    The importance and impact of invasive species are usually considered based on their economic implications, particularly the direct damage that they cause. The West Indian drywood termite Cryptotermes brevis (Walker) is an example and is a concern in structural lumber, furniture, and other wood products. Despite its importance, its tropical wood preferences and the wood physical characteristics contributing to resistance have not been investigated to date. Here, we developed wood testing units to allow the X-ray recording of termite colonization and then subsequently tested tropical wood resistance to the termite through free-choice and no-choice bioassays using these wood testing units. The relevance of wood density and hardness as determinants of such resistance was also tested, as was termite mandible wear. The wood testing units used allowed the assessment of the termite infestation and wood area loss, enabling subsequent choice bioassays to be performed. While pine (Pinus sp.), jequitiba (Cariniana sp.) and angelim (Hymenolobium petraenum) exhibited the heaviest losses and highest infestations; cumaru (Dipteryx odorata), guariuba (Clarisia racemosa), and purpleheart (Peltogyne sp.) showed the lowest losses and infestations; courbaril (Hymenaea courbaril), eucalyptus (Eucalyptus sp.), and tatajuba (Bagassa guianensis) exhibited intermediary results. Wood hardness and in particular wood density were key determinants of wood resistance to the termites, which exhibited lower infestations associated with greater mandible wear when infesting harder high-density wood. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  6. Industrial sector-based volatile organic compound (VOC) source profiles measured in manufacturing facilities in the Pearl River Delta, China.

    PubMed

    Zheng, Junyu; Yu, Yufan; Mo, Ziwei; Zhang, Zhou; Wang, Xinming; Yin, Shasha; Peng, Kang; Yang, Yang; Feng, Xiaoqiong; Cai, Huihua

    2013-07-01

    Industrial sector-based VOC source profiles are reported for the Pearl River Delta (PRD) region, China, based source samples (stack emissions and fugitive emissions) analyzed from sources operating under normal conditions. The industrial sectors considered are printing (letterpress, offset and gravure printing processes), wood furniture coating, shoemaking, paint manufacturing and metal surface coating. More than 250 VOC species were detected following US EPA methods TO-14 and TO-15. The results indicated that benzene and toluene were the major species associated with letterpress printing, while ethyl acetate and isopropyl alcohol were the most abundant compounds of other two printing processes. Acetone and 2-butanone were the major species observed in the shoemaking sector. The source profile patterns were found to be similar for the paint manufacturing, wood furniture coating, and metal surface coating sectors, with aromatics being the most abundant group and oxygenated VOCs (OVOCs) as the second largest contributor in the profiles. While OVOCs were one of the most significant VOC groups detected in these five industrial sectors in the PRD region, they have not been reported in most other source profile studies. Such comparisons with other studies show that there are differences in source profiles for different regions or countries, indicating the importance of developing local source profiles. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

  7. The computational modeling of supercritical carbon dioxide flow in solid wood material

    NASA Astrophysics Data System (ADS)

    Gething, Brad Allen

    The use of supercritical carbon dioxide (SC CO2) as a solvent to deliver chemicals to porous media has shown promise in various industries. Recently, efforts by the wood treating industry have been made to use SC CO 2 as a replacement to more traditional methods of chemical preservative delivery. Previous studies have shown that the SC CO2 pressure treatment process is capable of impregnating solid wood materials with chemical preservatives, but concentration gradients of preservative often develop during treatment. Widespread application of the treatment process is unlikely unless the treatment inconsistencies can be improved for greater overall treating homogeneity. The development of a computational flow model to accurately predict the internal pressure of CO2 during treatment is integral to a more consistent treatment process. While similar models that attempt to describe the flow process have been proposed by Ward (1989) and Sahle-Demessie (1994), neither have been evaluated for accuracy. The present study was an evaluation of those models. More specifically, the present study evaluated the performance of a computational flow model, which was based on the viscous flow of compressible CO2 as a single phase through a porous medium at the macroscopic scale. Flow model performance was evaluated through comparisons between predicted pressures that corresponded to internal pressure development measured with inserted sensor probes during treatment of specimens. Pressure measurements were applied through a technique developed by Schneider (2000), which utilizes epoxy-sealed stainless steel tubes that are inserted into the wood as pressure probes. Two different wood species were investigated as treating specimens, Douglas-fir and shortleaf pine. Evaluations of the computational flow model revealed that it is sensitive to input parameters that relate to both processing conditions and material properties, particularly treating temperature and wood permeability, respectively. This sensitivity requires that the input parameters, principally permeability, be relatively accurate to evaluate the appropriateness of the phenomenological relationships of the computational flow model. Providing this stipulation, it was observed that below the region of transition from CO2 gas to supercritical fluid, the computational flow model has the potential to predict flow accurately. However, above the transition region, the model does not fully account for the physics of the flow process, resulting in prediction inaccuracy. One potential cause for the loss of prediction accuracy in the supercritical region was attributed to a dynamic change in permeability that is likely caused by an interaction between the flowing SC CO2 and the wood material. Furthermore, a hysteresis was observed between the pressurization and depressurization stages of treatment, which cannot be explained by the current flow model. If greater accuracy in the computational flow model is desired, a more complex approach to the model is necessary, which would include non-constant input parameters of temperature and permeability. Furthermore, the implications of a multi-scale methodology for the flow model were explored from a qualitative standpoint.

  8. Production and marketing of wood piling and poles in the Northeast

    Treesearch

    Myron D. Ostrander

    1953-01-01

    Since the earliest colonial settlements along the northeastern seaboard, wood piling has been used for wharves and piers and other waterfront structures. As waterside industries and waterborne commerce grew, the demand for wood piling grew.

  9. Recycling and the Use of Wood Materials by the U.S. Pallet Industry

    Treesearch

    Robert J. Bush; Eric Hansen; Philip A. Araman

    1994-01-01

    Estimates of the use of new and recycled wood materials by the U.S. pallet industry are presented. The industry (including SICs 2441, 2448, 2449) consumed 4.74 billion board feet of solid hardwoods and 2.15 billion board feet of solid softwoods in 1992. The most common individual hardwood species were oak and yellow-poplar. Douglas-fir and southern yellow pine were the...

  10. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mannstrom, B.

    In the fifties, the price of electrical energy and fuels was already very high in Finland and Sweden - this was an early incentive for the Scandinavian pulp and paper industry to minimize their process costs. Three companies are taken as examples to illustrate the combustion of fuels such as spent cooking liquors, wood wastes and peat for process heat and the processing of whole-tree thinnings. Further discussion follows on energy conservation in the pulping and papermaking processes and the application of energy management systems.

  11. Wood-Based Nanocomposite Derived by in Situ Formation of Organic-Inorganic Hybrid Polymer within Wood via a Sol-Gel Method.

    PubMed

    Dong, Xiaoying; Zhuo, Xiao; Wei, Jie; Zhang, Gang; Li, Yongfeng

    2017-03-15

    Solid wood materials and wood-plastic composites as two kinds of lightweight materials are attracting great interest from academia and industry due to their green and recycling nature. However, the relatively lower specific strength limits their wider applications. In particular, solid wood is vulnerable to moisture and decay fungi in nature, resulting in its poor durability for effectively long-term utilization. Inspired from the porous structure of wood, we propose a new design to build a wood-based nanocomposite with higher specific strength and satisfactory durability by in situ generation of organic-inorganic hybrid polymer within wood via a sol-gel method. The derived composite has 50-1200% improvement of impact toughness, 56-192% improvement of tensile strength, and 110-291% improvement of flexural strength over those of typical wood-plastic composites, respectively; and even 34% improvement of specific tensile strength than that of 36A steel; 208% enhancement of hardness; and 156% enhancement of compression strength than those of compared solid wood, respectively; as well as significantly improved dimensional stability and decay resistance over those of untreated natural wood. Such materials could be potentially utilized as lightweight and high-strength materials for applications in construction and automotive industries. This method could be extended to constitute other inorganic nanomaterials for novel organic-inorganic hybrid polymer within wood.

  12. Measuring Timber Truck Loads With Image Processing In Paper Mills

    NASA Astrophysics Data System (ADS)

    Silva, M. Santos; Carvalho, Fernando D.; Rodrigues, F. Carvalho; Goncalves, Ana N. R.

    1989-04-01

    The raw material for the paper industry is wood. To have an exact account of the stock of piled sawn tree trunks every truck load entering the plant's stockyard must be measured as to the amount of wood being brought in. Weighting down the trucks has its own problems, mainly, due to the high capacity of the tree trunks to absorb water. This problem is further enhanced when calculations must be made to arrive at the mass of sawn tree trunks which must go into the process of producing a certain quantity of paper pulp. The method presented here is based on two fixed cameras which take the image of the truck load. One takes a view of the trunks in order to get information on the average length of the tree trunks. The other obtains a side view which is digitised and by just discriminating against a grey level the area covered by the tree trunk cross section is measured. A simple arithmetic operation gives the volume of wood in the trunk. The same computer, a PC, will register the trucks particulars is almost independent of weather the wood is wet or dry and it serves trucks of any size.

  13. The technology for creating of decorative plywood with low formaldehyde emission

    NASA Astrophysics Data System (ADS)

    Safin, R. R.; Khasanshin, R. R.; Shaikhutdinova, A. R.; Ziatdinov, R. R.

    2015-10-01

    The development of new technologies of processing of industrial art products to improve their functional, ergonomic and aesthetic properties is one of the important directions of improvement of product design. The article presents the technology of preliminary contact thermal modification of sheets of veneer in the production of low-toxic decorative plywood and laminated products, which lets significantly improve their water resistance. It has been established that thermal modification of wood material causes a decrease in density with increasing temperature and duration of treatment. A mathematical model describing the process of heat treatment of wood veneer and allowing predicting the degree of thermal modification of wood material depending on the modes of modification has been developed. Several studies to determine the basic properties of plywood made on the basis of heat-treated veneer were conducted in the work. Studies have shown that the thermal effect on veneer in the manufacture of plywood provides improves water-repellent properties of it, while not increasing its toxicity. It has also been found that the alternating of layers of wood with varying degrees of heat treatment when creating laminated products greatly enhances the decorative features of the products.

  14. Combustion characteristics of Douglas Fir planer shavings. Technical progress report No. 4, September 16, 1977--September 15, 1978

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Junge, D.C.

    1978-12-01

    Significant quantities of wood residue fuels are presently being used in industrial steam generating facilities. Recent studies indicate that substantial additional quantities of wood residue fuels are available for energy generation in the form of steam and/or electricity. A limited data base on the combustion characteristics of wood residue fuels has resulted in the installation and operation of inefficient combustion systems for these fuels. This investigation of the combustion characteristics of wood residue fuels was undertaken to provide a data base which could be used to optimize the combustion of such fuels. Optimization of the the combustion process in industrialmore » boilers serves to improve combustion efficiency and to reduce air pollutant emissions generated in the combustion process. This report presents data on the combustion characteristics of Douglas Fir planer shavings. The data were obtained in a pilot scale combustion test facility at Oregon State Univerisity. Other technical reports present data on the combustion characteristics of: Douglas Fir bark, Red Alder sawdust, Red Alder bark, Ponderosa pine bark, Hemlock bark, and Eastern White Pine bark. An executive summary report is also available which compares the combustion characteristics of the various fuel species.« less

  15. Rice straw-wood particle composite for sound absorbing wooden construction materials.

    PubMed

    Yang, Han-Seung; Kim, Dae-Jun; Kim, Hyun-Joong

    2003-01-01

    In this study, rice straw-wood particle composite boards were manufactured as insulation boards using the method used in the wood-based panel industry. The raw material, rice straw, was chosen because of its availability. The manufacturing parameters were: a specific gravity of 0.4, 0.6, and 0.8, and a rice straw content (10/90, 20/80, and 30/70 weight of rice straw/wood particle) of 10, 20, and 30 wt.%. A commercial urea-formaldehyde adhesive was used as the composite binder, to achieve 140-290 psi of bending modulus of rupture (MOR) with 0.4 specific gravity, 700-900 psi of bending MOR with 0.6 specific gravity, and 1400-2900 psi of bending MOR with a 0.8 specific gravity. All of the composite boards were superior to insulation board in strength. Width and length of the rice straw particle did not affect the bending MOR. The composite boards made from a random cutting of rice straw and wood particles were the best and recommended for manufacturing processes. Sound absorption coefficients of the 0.4 and 0.6 specific gravity boards were higher than the other wood-based materials. The recommended properties of the rice straw-wood particle composite boards are described, to absorb noises, preserve the temperature of indoor living spaces, and to be able to partially or completely substitute for wood particleboard and insulation board in wooden constructions.

  16. Final Technical Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Alexander Fridman

    2005-06-01

    This DOE project DE-FC36-04GO14052 ''Plasma Pilot Plant Test for Treating VOC Emissions from Wood Products Plants'' was conducted by Drexel University in cooperation with Georgia-Pacific (G-P) and Kurchatov Institute (KI). The objective of this project was to test the Plasma Pilot Plant capabilities in wood industry. The final goal of the project was to replace the current state-of-the-art, regenerative thermal oxidation (RTO) technology by Low-Temperature Plasma Technology (LTPT) in paper and wood industry for Volatile Organic Components (VOC) destruction in High Volume Low Concentration (HVLC) vent emissions. MetPro Corporation joined the team as an industrial partner from the environmental controlmore » business and a potential leader for commercialization. Concurrent Technology Corporation (CTC) has a separate contract with DOE for this technology evaluation. They prepared questionnaires for comparison of this technology and RTO, and made this comparison. These data are presented in this report along with the description of the technology itself. Experiments with the pilot plant were performed with average plasma power up to 3.6 kW. Different design of the laboratory and pilot plant pulsed coronas, as well as different analytical methods revealed many new peculiarities of the VOC abatement process. The work reported herein describes the experimental results for the VOCs removal efficiency with respect to energy consumption, residence time, water effect and initial concentration.« less

  17. Controlling mold on wood Pallets

    Treesearch

    Carol A. Clausen

    2012-01-01

    THE WOOD PALLET AND CONTAINER INDUSTRY CONSUMES 4.5 billion board feet (BBF) of hardwoods and 1.8 BBF of softwoods for the annual production of 400-500 million solid wood pallets. While alternative materials such as plastic, corrugated paperboard and metal have entered the market, solid wood remains the material of choice for a majority of pallets on the market (more...

  18. Characterizing phenolformaldehyde adhesive cure chemistry within the wood cell wall

    Treesearch

    Daniel J. Yelle; John Ralph

    2016-01-01

    Adhesive bonding of wood using phenol-formaldehyde remains the industrial standard in wood product bond durability. Not only does this adhesive infiltrate the cell wall, it also is believed to form primary bonds with wood cell wall polymers, particularly guaiacyl lignin. However, the mechanism by which phenol-formaldehyde adhesive intergrally interacts and bonds to...

  19. CCA retention and its effects on the bonding performance of decommissioned treated wood: a preliminary study

    Treesearch

    Cheng Piao; Todd F. Shupe; Mark Gibson; Chung Y. Hse

    2009-01-01

    Chromated copper arsenate (CCA) continues to be widely used as a wood preservative for industrial uses in the U.S. Disposal of treated wood is a potential long-term environmental liability. Current practices for disposing of decommissioned preservative-treated wood include landfilling and incineration, which are increasingly impractical due to environmental...

  20. Environmental impact of preservative-treated wood in a wetland boardwalk.

    Treesearch

    Stan T. Lebow; Patricia K. Lebow; Daniel O. Foster; Kenneth M. Brooks

    Forest Service, Bureau of Land Management, and industry partners are cooperating in a study of the leaching and environmental effects of a wetland boardwalk. The construction project is considered bworst casec because the site has high rainfall and large volumes of treated wood were used. Separate boardwalk test sections were constructed using untreated wood or wood...

  1. Harvesting strategies for increasing the availability and quality of hardwood fiber

    Treesearch

    Chris B. LeDoux

    1999-01-01

    Worldwide demand for wood and wood products will continue to increase as global human population increases. These increasing demands for wood will continue to provide economic incentives for non-industrial private forest-land (NIPF) owners to increase the availability and quality of wood fiber harvested from their lands. The challenge is to encourage and facilitate...

  2. 76 FR 46185 - Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-02

    ...\\ Micklewright, J.T., Wood preservation statistics, American Wood Preservers Assocation, p. 25. Most of the... wood. The bulk of timber production in the western United States is on the coast of the Pacific... were from the Northeast and Lake States. Data for the western states is from the Western Wood Products...

  3. Wood formation and the concept of wood quality

    Treesearch

    Philip R. Larson

    1969-01-01

    Wood has been the principal product of trees from the first hunting club or digging tool of ancient man to the rich variety of industrial and decorative uses of modern civilization. The universal practical value and aesthetic appeal of wood may be traced to the seemingly infinite variation in its characteristics. These variations arise from the structure and...

  4. Gill bacteria enable a novel digestive strategy in a wood-feeding mollusk.

    PubMed

    O'Connor, Roberta M; Fung, Jennifer M; Sharp, Koty H; Benner, Jack S; McClung, Colleen; Cushing, Shelley; Lamkin, Elizabeth R; Fomenkov, Alexey I; Henrissat, Bernard; Londer, Yuri Y; Scholz, Matthew B; Posfai, Janos; Malfatti, Stephanie; Tringe, Susannah G; Woyke, Tanja; Malmstrom, Rex R; Coleman-Derr, Devin; Altamia, Marvin A; Dedrick, Sandra; Kaluziak, Stefan T; Haygood, Margo G; Distel, Daniel L

    2014-11-25

    Bacteria play many important roles in animal digestive systems, including the provision of enzymes critical to digestion. Typically, complex communities of bacteria reside in the gut lumen in direct contact with the ingested materials they help to digest. Here, we demonstrate a previously undescribed digestive strategy in the wood-eating marine bivalve Bankia setacea, wherein digestive bacteria are housed in a location remote from the gut. These bivalves, commonly known as shipworms, lack a resident microbiota in the gut compartment where wood is digested but harbor endosymbiotic bacteria within specialized cells in their gills. We show that this comparatively simple bacterial community produces wood-degrading enzymes that are selectively translocated from gill to gut. These enzymes, which include just a small subset of the predicted wood-degrading enzymes encoded in the endosymbiont genomes, accumulate in the gut to the near exclusion of other endosymbiont-made proteins. This strategy of remote enzyme production provides the shipworm with a mechanism to capture liberated sugars from wood without competition from an endogenous gut microbiota. Because only those proteins required for wood digestion are translocated to the gut, this newly described system reveals which of many possible enzymes and enzyme combinations are minimally required for wood degradation. Thus, although it has historically had negative impacts on human welfare, the shipworm digestive process now has the potential to have a positive impact on industries that convert wood and other plant biomass to renewable fuels, fine chemicals, food, feeds, textiles, and paper products.

  5. Michigan timber industry, 2010

    Treesearch

    David E. Haugen

    2016-01-01

    This resource update provides an overview of timber product output (TPO) and use in Michigan based on questionnaires designed to determine the size and composition of the State's primary wood-using industry, its use of roundwood, and its generation and disposition of wood residues. This study was a cooperative effort between the Michigan Department of Natural...

  6. North Dakota timber industry, 2014

    Treesearch

    David E. Haugen; Robert A. Harsel

    2017-01-01

    This resource update provides an overview of timber product output (TPO) and use in North Dakota based on questionnaires designed to determine the size and composition of the State's primary wood-using industry, its use of roundwood, and its generation and disposition of wood residues. This study was a cooperative effort between the North Dakota Forest Service (...

  7. Indiana timber industry, 2013

    Treesearch

    Brian F. Walters; Jeff Settle; Ronald J. Piva

    2017-01-01

    This resource update provides an overview of timber product output (TPO) and use in Indiana based on questionnaires designed to determine the size and composition of the State's primary wood-using industry, its use of roundwood, and its generation and disposition of wood residues. This study was a cooperative effort between the Indiana Department of Natural...

  8. Wisconsin timber industry, 2013

    Treesearch

    David E. Haugen

    2017-01-01

    This resource update provides an overview of timber product output (TPO) and use in Wisconsin based on questionnaires designed to determine the size and composition of the State's primary wood-using industry, its use of roundwood, and its generation and disposition of wood residues. This study was a cooperative effort between the Wisconsin Department of Natural...

  9. Safety in the wood products industry

    Treesearch

    Judd H. Michael; Janice K. Wiedenbeck; Janice K. Wiedenbeck

    2004-01-01

    The wood products industry has historically been considered to be one of the most dangerous for manufacturing employees. Workers are exposed to hazards ranging from falling trees to debarkers to saws to nail guns, while often working under pressures for high productivity. Compounding the danger from these hazards are the mentally and physically challenging working...

  10. Skills Conversion Project: Chapter 6, Forest Operations and Wood Products. Final Report.

    ERIC Educational Resources Information Center

    National Society of Professional Engineers, Washington, DC.

    A study of the forest operations and wood products industries was conducted in Atlanta and Seattle by the National Society of Professional Engineers. Included among these industries are tree development, crop and land management, logging, material handling transportation, cutting, peeling, assembly, pulp and paper, mobile homes, construction,…

  11. Wisconsin timber industry--an assessment of timber product output and use.

    Treesearch

    James E. Blyth; James W. Whipple; W. Brad Smith

    1989-01-01

    Discusses recent Wisconsin forest industry trends, production and receipts of pulpwood, saw logs, and veneer logs, and production of other timber products in 1986. Reports on logging residue, on timber removals, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  12. Integrating Energy and Environmental Management in Wood Furniture Industry

    PubMed Central

    Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review. PMID:24587734

  13. Integrating energy and environmental management in wood furniture industry.

    PubMed

    Gordić, Dušan; Babić, Milun; Jelić, Dubravka; Konćalović, Davor; Vukašinović, Vladimir

    2014-01-01

    As energy costs continue to rise, industrial plants (even those of energy nonintensive industries such as furniture industry) need effective way to reduce the amount of energy they consume. Besides, there are a number of economic and environmental reasons why a company should consider environmental management initiatives. This paper provides a detailed guideline for implementing joint energy and environmental management system in wood furniture industrial company. It covers in detail all essential aspects of the system: initial system assessment, organization, policy development, energy and environmental auditing, action plan development, system promotion, checking system performance, and management review.

  14. Impact of board-marker accuracy on lumber yield

    Treesearch

    Urs Buehlmann; R. Edward Thomas

    2003-01-01

    The production of wooden furniture parts, mouldings, and flooring requires the removal of unacceptable character marks (also called "defects") such as holes, rot, knots, etc., from boards. The majority of the wood processing industry manually identifies such unusable areas and marks them with fluorescent crayons. Automated saws scan these marks and computers...

  15. Alternative Fuels Data Center: Ethanol Fuel Basics

    Science.gov Websites

    ethanol. Ethanol Energy Balance In the United States, 95% of ethanol is produced from the starch in corn demonstrates a positive energy balance, meaning that the process of producing ethanol fuel does not require energy balance of ethanol because the feedstocks are either waste, co-products of another industry (wood

  16. Tropical Timber Identification using Backpropagation Neural Network

    NASA Astrophysics Data System (ADS)

    Siregar, B.; Andayani, U.; Fatihah, N.; Hakim, L.; Fahmi, F.

    2017-01-01

    Each and every type of wood has different characteristics. Identifying the type of wood properly is important, especially for industries that need to know the type of timber specifically. However, it requires expertise in identifying the type of wood and only limited experts available. In addition, the manual identification even by experts is rather inefficient because it requires a lot of time and possibility of human errors. To overcome these problems, a digital image based method to identify the type of timber automatically is needed. In this study, backpropagation neural network is used as artificial intelligence component. Several stages were developed: a microscope image acquisition, pre-processing, feature extraction using gray level co-occurrence matrix and normalization of data extraction using decimal scaling features. The results showed that the proposed method was able to identify the timber with an accuracy of 94%.

  17. Wood Energy Potential in Northwestern South Carolina

    Treesearch

    James W. McMinn

    1986-01-01

    The quantity of unused wood in an Ill-county area in northwestern South Carolina was projected to be more than 16 million tons annually. Wood that is unsuitable for products other than fuel amounts to nearly 9 million tons annually.The most likely energy demand by industrial plants that are good candidates for wood fuel systems is 1.5 million tons annually.Maximum...

  18. Generation and Recovery of Solid Wood Waste in the U.S.

    Treesearch

    Bob Falk; David McKeever

    2012-01-01

    North America has a vast system of hardwood and softwood forests, and the wood harvested from this resource is widely used in many applications. These include lumber and other building materials, furniture, crating, containers, pallets and other consumer goods. This wide array of wood products generates not only a large amount of industrial wood by-product during the...

  19. Evaluation of micron-sized wood and bark particles as filler in thermoplastic composites

    Treesearch

    David P. Harper; Thomas L. Eberhardt

    2010-01-01

    Micron-sized particles, prepared from loblolly pine (Pinus taeda L.) wood and bark, were evaluated for use in wood-plastic composites (WPCs). Particles were also prepared from hard (periderm) and soft (obliterated phloem) components in the bark and compared to whole wood (without bark) filler commonly used by the WPC industry. All bark fillers had...

  20. Environmental assessment of a wood-waste-fired industrial watertube boiler. Volume 1. Technical results. Final report, March 1981-March 1984

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Castaldini, C.; Waterland, L.R.

    1987-03-01

    The two-volume report gives results from field tests of a wood-waste-fired industrial watertube boiler. Two series of tests were performed: one firing dry (11% moisture) wood waste, and the other firing green (34% moisture) wood waste. Emission measurements included: continuous monitoring of flue-gas emissions; source-assessment sampling system (SASS) sampling of the flue gas with subsequent laboratory analysis of samples to give total flue-gas organics in two boiling-point ranges, compound category information within these ranges, specific quantitation of the semi-volatile organic priority pollutants, and flue-gas concentrations of 73 trace elements; Method 5 sampling for particulate; controlled condensation system sampling for SO/submore » 2/ and SO/sub 3/; and grab sampling of boiler mechanical collector hopper ash for inorganic composition determinations. Total organic emissions decreased from 60-135 mg/dscm firing dry wood to 2-65 mg/dscm firing green wood, in parallel with corresponding boiler CO emissions.« less

  1. Environmental assessment of a wood-waste-fired industrial watertube boiler. Volume 2. Data supplement. Final report, March 1981-March 1984

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Castaldini, C.; Waterland, L.R.

    1987-03-01

    The two-volume report gives results from field tests of a wood-waste-fired industrial watertube boiler. Two series of tests were performed: one firing dry (11% moisture) wood waste, and the other firing green (34% moisture) wood waste. Emission measurements included: continuous monitoring of flue-gas emissions; source-assessment sampling system (SASS) sampling of the flue-gas with subsequent laboratory analysis of samples to give total flue-gas organics in two boiling-point ranges, compound category information within these ranges, specific quantitation of the semi-volatile organic priority pollutants, and flue gas concentrations of 73 trace elements; Method 5 sampling for particulate; controlled condensation system sampling for SO/submore » 2/ and SO/sub 3/; and grab sampling of boiler mechanical collector hopper ash for inorganic and organic composition determinations. Total organic emissions decreased from 60-135 mg/dscm firing dry wood to 2-65 mg/dscm firing green wood, in parallel with corresponding boiler CO emissions.« less

  2. Characteristics of wood ash and influence on soil properties and nutrient uptake: an overview.

    PubMed

    Demeyer, A; Voundi Nkana, J C; Verloo, M G

    2001-05-01

    Wood industries and power plants generate enormous quantities of wood ash. Disposal in landfills has been for long a common method for removal. New regulations for conserving the environment have raised the costs of landfill disposal and added to the difficulties for acquiring new sites for disposal. Over a few decades a number of studies have been carried out on the utilization of wood ashes in agriculture and forestry as an alternative method for disposal. Because of their properties and their influence on soil chemistry the utilization of wood ashes is particularly suited for the fertility management of tropical acid soils and forest soils. This review principally focuses on ash from the wood industry and power plants and considers its physical, chemical and mineralogical characteristics, its effect on soil properties, on the availability of nutrient elements and on the growth and chemical composition of crops and trees, as well as its impact on the environment.

  3. Pahoa geothermal industrial park. Engineering and economic analysis for direct applications of geothermal energy in an industrial park at Pahoa, Hawaii

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Moreau, J.W.

    1980-12-01

    This engineering and economic study evaluated the potential for developing a geothermal industrial park in the Puna District near Pahoa on the Island of Hawaii. Direct heat industrial applications were analyzed from a marketing, engineering, economic, environmental, and sociological standpoint to determine the most viable industries for the park. An extensive literature search produced 31 existing processes currently using geothermal heat. An additional list was compiled indicating industrial processes that require heat that could be provided by geothermal energy. From this information, 17 possible processes were selected for consideration. Careful scrutiny and analysis of these 17 processes revealed three thatmore » justified detailed economic workups. The three processes chosen for detailed analysis were: an ethanol plant using bagasse and wood as feedstock; a cattle feed mill using sugar cane leaf trash as feedstock; and a papaya processing facility providing both fresh and processed fruit. In addition, a research facility to assess and develop other processes was treated as a concept. Consideration was given to the impediments to development, the engineering process requirements and the governmental support for each process. The study describes the geothermal well site chosen, the pipeline to transmit the hydrothermal fluid, and the infrastructure required for the industrial park. A conceptual development plan for the ethanol plant, the feedmill and the papaya processing facility was prepared. The study concluded that a direct heat industrial park in Pahoa, Hawaii, involves considerable risks.« less

  4. Level and distribution of employee exposures to total and respirable wood dust in two Canadian sawmills.

    PubMed

    Teschke, K; Hertzman, C; Morrison, B

    1994-03-01

    Personal respirable (N = 230) and total (N = 237) dust measurements were made in two coastal British Columbia sawmills using a sampling strategy that randomly selected workers from all jobs in the mills over two seasons. Information about job title, department, season, weather conditions, location of the job relative to wood-cutting machines, and control measures also was collected at the time of sampling. Only 16 respirable wood dust samples were above the detection limit of 0.08 mg/m3; all 16 had levels < or = 0.20 mg/m3. Total wood dust concentrations were also low (36% less than the detection limit), with a mean of 0.51 mg/m3, and ranging from < 0.08 to 52 mg/m3. Measurements of exposure taken close to chippers, planers, and multiple saws had the highest total wood dust levels. Sawmill department and booth enclosures also were associated with wood dust concentrations, while local exhaust ventilation and weather conditions were not. Wood dust levels in this study were generally lower than in other studies of this industry, but most sawmill investigations report mean wood dust concentrations lower than those measured in the furniture and cabinetmaking industries, where concerns about wood dust exposures initially were raised.

  5. Housing trends and impact on wood manufacturing

    Treesearch

    Matt Bumgardner; Urs Buehlmann; Al Schuler; Karen Koenig

    2013-01-01

    Demand from housing and other construction-related sectors continues to be an important issue for the secondary wood products industry. Conducted in early 2013, this fourth annual survey provides updated information on the status and actions of U.S. manufacturers affected by these industries. The study is a joint effort by Virginia Tech, the USDA Forest Service, and...

  6. Pallet industry relying more on recovered wood material

    Treesearch

    J. Bejune; R. Bush; Philip A. Araman; B. Hansen; D. Cumbo

    2002-01-01

    This article is a research report titled, Wood Use Trends in the Pallet and Container Industry: 1992 - 1999, that was published by the authors earlier this year. The research was conducted by Virginia Tech in collaboration with the U.S. Forest Service Southern Research Station. Part one, published in the September, 2002 issue of Pallet Enterprise, summarized the...

  7. Competitiveness in the sawmills and wood preservation industry in the United States and Canada

    Treesearch

    Rao V Nagubadi; Daowei Zhang

    2010-01-01

    We examine relative prices, relative productivity levels, and competitiveness in the sawmills and wood preservation industry in the united states and Canada between 1958 and 2003 by using purchasing power parities and bilateral translog production function. Our results show that the competitiveness of the Canadian industy is facilitated by higher relative productivity...

  8. Adhesive bonding of wood materials

    Treesearch

    Charles B. Vick

    1999-01-01

    Adhesive bonding of wood components has played an essential role in the development and growth of the forest products industry and has been a key factor in the efficient utilization of our timber resource. The largest use of adhesives is in the construction industry. By far, the largest amounts of adhesives are used to manufacture building materials, such as plywood,...

  9. Longitudial variation in wood specific gravity of planted loblolly pine in the southern United States

    Treesearch

    Finto Antony; Laurence R. Schimleck; Richard F. Daniels; Alexander Clark

    2012-01-01

    Loblolly pine (Pinus taeda L.) is the most important plantation species grown in the southern United States, having more than half of the standing pine volume. Wood from loblolly pine is a principal source of raw material for the pulp and paper industry and is desirable for the production of lumber and composite wood products. The quality of wood...

  10. Small-scale lumber drying using wood gasification as a heat source

    Treesearch

    Richard Bergman

    2005-01-01

    Small, rural forested communities have the economic need to develop a wood products industry to replace the loss of large sawmills and maintain forest health. The main objective of this study was to explore the potential of using producer (wood) gas to fire a hot water boiler for a small dry kiln capable of drying both softwood and hardwood lumber. A BioMax wood...

  11. Highlights from wood for structural and architectural purposes

    Treesearch

    C.W. Boyd; P. Koch; H.B. McKean; C.R. Morschauser; S.B. Preston; F.F. Wangaard

    1977-01-01

    In 1970 the softwood and hardwood forests of the United States yielded 193 million tons (OD basis) of sawlogs, veneer logs, pulpwood, miscellaneous industrial wood, and fuel wood. By 1965, demand for such wood will likely be in the range from 248 to 260 million tons, while supply should be about 260 million tons. By the year 2000, demand will probably be in the range...

  12. Recommended action for the wood-flooring industry to secure its share of the urban rehabilitation market

    Treesearch

    Robert L., Jr. Nevel

    1974-01-01

    Urban rehabilitation is a major market for wood flooring, but if wood flooring is to continue to be used to any great extent in urban rehabilitation, it must be made more acceptable to the building contractor and housing owner. Changes in distribution, supply, and pricing could make wood flooring more readily available; product modification could reduce its short-term...

  13. Highlights from wood for structural and architectural purposes

    Treesearch

    Conor W. Boyd; Peter Koch; Herbert B. McKean; Charles R. Morchauser; Stephen B. Preston; Frederick F. Wangaard

    1977-01-01

    In 1970 the softwood and hardwood forests of the United States yielded 193 million tons (OD basis) of sawlogs, veneer logs, pulpwood, miscellaneous industrial wood, and fuel wood. By 1985, demand for such wood will likely bei n the range from 248 to 260 million tons, while supply will be about 260 million tons. By the year 2000, demand will probably be in the range...

  14. Wood-thermoplastic composites manufactured using beetle-killed spruce from Alaska

    Treesearch

    V. Yadama; Eini Lowell; N. Petersen; D. Nicholls

    2009-01-01

    The primary objectives of the study were to characterize the critical properties of wood flour produced using highly deteriorated beetle-killed spruce for wood-plastic composite (WPC) production and evaluate important mechanical and physical properties of WPC extruded using an industry standard formulation. Chemical composition analysis indicated no significant...

  15. Wood Products Consumption for Industrial Markets in the United States, Testing a New Research Method

    Treesearch

    Craig Adair; David B. McKeever

    2013-01-01

    In early 2012, APA-The Engineered Wood Association conducted studies of three industries: institutional furniture, motor homes, and travel trailers and campers. The survey procedure was the same as that used by APA for many years. Lists of individual manufacturers were purchased, a telephone interviewing company was hired to administer a questionnaire, and APA...

  16. Exploring methods for prevention of oxidative stain in soft maple

    Treesearch

    Michael C. Wiemann; Richard D. Bergman; Mark Knaebe; Scott A. Bowe

    2009-01-01

    Interior gray enzymatic oxidative stain for white woods such as maple has plagued the wood industry for many years because methods that have been found to reduce stain are hard to scale up to industrial levels. We examined possible alternative treatments to eliminate stain in soft maple (Acer rubrum L.), and found that exposure to sulfur dioxide gas eliminates interior...

  17. A Survey of Educational Needs and Online Training Perceptions in the Wood Products Industry

    ERIC Educational Resources Information Center

    Quesada-Pineda, Henry J.; Conn, Samuel S.; Sanchez, L. Scarlett

    2011-01-01

    A sample of 651 wood products industries were surveyed to determine their educational needs and quantify their interest in receiving continuing education via an online format. In the survey, respondents were asked to rank, in order of priority, their educational needs. With a 15.2% response rate, survey respondents (n=99) indicated that an online…

  18. 2009 Wood and Fiber Product Seminar : VTT and USDA joint activity

    Treesearch

    Ali Harlin; Minna Vikman

    2010-01-01

    Foward -- The development of high-value wood and fiber products is one of the most important challenges currently facing the forest industry. Traditional pulp and paper products are on a critical path in developed countries with prices and markets decreasing. Finland and the USA have faced the same problem, which is a fundamental reason for Industrial Biomaterials...

  19. Approaches to, and perceived benefits of, training in the secondary wood industry

    Treesearch

    Matthew S. Bumgardner; Urs Buehlmann; Albert T. Schuler; Brooke Baldwin Wisdom; Brooke Baldwin Wisdom

    2005-01-01

    Practitioners and researchers alike have noted that a well-trained workforce is an important component of the competitiveness of U.S. manufacturers in the global economy. This study compares four secondary wood industry sectors on their approaches to, and perceived benefits of, training production employees. The study was based on an Internet survey in the autumn of...

  20. Housing trends & impacts on wood products manufacturing

    Treesearch

    Matt Bumgardner; Urs Buehlmann; Al Schuler; Karen Koenig

    2012-01-01

    While there are some signs of improvement in the business conditions and sales volume faced by the secondary wood industry in relation to the housing market, they are slow in coming. This third annual housing market survey looks at the trends in the industry and analyzes what has changed in terms of market conditions, company performance and the actions being taken by...

  1. Prospects of rice straw as a raw material for paper making.

    PubMed

    Kaur, Daljeet; Bhardwaj, Nishi Kant; Lohchab, Rajesh Kumar

    2017-02-01

    Pulp and paper mills are indispensable for any nation as far as the growth of the nation is concerned. Due to fast growth in population, urbanization and industrialization, the demand and consumption of paper has increased tremendously. These put high load on our natural resources and force the industry to look for alternative raw material. Rice straw is a lignocellulosic material abundantly available in wood short countries like China, India, Bangladesh, etc. and can be used as raw material for this industry. Open burning of rice straw releases noxious green house gases to the air and poses serious threats to global air chemistry and human health. So, it is a dual benefit option (for farmers and industries) to use rice straw as a raw material in pulp and paper industry. Organosolv pulping using acids are the prominent choices of researchers to convert this residue into valuable pulp but in developed countries only. Developing world favours the soda and soda-AQ processes as these are economical. As a virtue of less lignin content in comparison to wood, rice straw requires less harsh conditions for cooking and can be easily pulped. Bleaching is a crucial step of paper making but also responsible for causing water pollution. Many studies revealed that during the process more than 500 chlorinated compounds are released that are highly toxic, bioaccumulative and carcinogenic in nature. Most of the industries over the globe switch on to the elemental chlorine free short sequence bleaching methods using chlorine dioxide, hypochlorite and hydrogen peroxide. This paper presented the effective need of ecofriendly, economically reliable pulping and bleaching sequences in case of rice straw to eliminate the problems of chlorinated compounds in wastewater of paper mills. Such approach of using waste as a raw material with its environmentally safe processing for making paper can prove to be valuable towards sustainable growth. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Returns from a white pine woodlot

    Treesearch

    Thomas W. McConkey

    1954-01-01

    Most of the forest land in the white pine region of the Northeast is owned in relatively small blocks or woodlots. The way these many small woodlots are managed can affect the forest economy of the entire region. Good forest management can increase the owner's income and provide more and better raw material for the wood processing industries.

  3. Developments and potential of radiation processing in the Philippines

    NASA Astrophysics Data System (ADS)

    Singson, C.; Carmona, C.

    This paper describes the research and development activities in three areas of radiation processing, namely: food irradiation, medical product sterilization and wood plastic combination. Plans and efforts exerted to acquire a larger gamma source to augment our present 5,000 curie source are discussed. Cost estimates for a radiation facility is presented on the basis of the market potential of food irradiation and medical product sterilization. Existing local industries that can benefit from the adaptation of irradiation technology in their processing requirements is described.

  4. Arsenic

    MedlinePlus

    ... and minerals. Arsenic compounds are used to preserve wood, as pesticides, and in some industries. Arsenic can ... Breathing sawdust or burning smoke from arsenic-treated wood Living in an area with high levels of ...

  5. Filling behaviour of wood plastic composites

    NASA Astrophysics Data System (ADS)

    Duretek, I.; Lucyshyn, T.; Holzer, C.

    2017-01-01

    Wood plastic composites (WPC) are a young generation of composites with rapidly growing usage within the plastics industry. The advantages are the availability and low price of the wood particles, the possibility of partially substituting the polymer in the mixture and sustainable use of the earth’s resources. The current WPC products on the market are to a large extent limited to extruded products. Nowadays there is a great interest in the market for consumer products in more use of WPC as an alternative to pure thermoplastics in injection moulding processes. This work presents the results of numerical simulation and experimental visualisation of the mould filling process in injection moulding of WPC. The 3D injection moulding simulations were done with the commercial software package Autodesk® Moldflow® Insight 2016 (AMI). The mould filling experiments were conducted with a box-shaped test part. In contrast to unfilled polymers the WPC has reduced melt elasticity so that the fountain flow often does not develop. This results in irregular flow front shapes in the moulded part, especially at high filler content.

  6. Pollution prevention options to meet impending MACT standards: A compendium

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Berglund, R.L.; Pickron, J.S.

    1997-12-31

    Under the Clean Air Act Amendments of 1990, the EPA was charged with developing MACT standards for a large group of operations representing a variety of different industry categories. While pollution prevention opportunities for meeting the requirements of the HON standards for the synthetic organic chemical manufacturing industry (SOCMI) and similar standards for the refining industry have drawn significant discussion and attention, little guidance for considering pollution prevention options for meeting other MACT standards have been provided. Yet, in working with companies to meet the requirements of proposed MACT standards for the shipbuilding, wood processing, plastics and gas processing industries,more » a number of pollution prevention opportunities for meeting these requirements were identified in early compliance strategies. This paper will provide a compendium of pollution prevention options for meeting these and other proposed and promulgated MACT standards.« less

  7. Properties of seven Colombian woods

    Treesearch

    B. A. Bendtsen; M. Chudnoff

    1981-01-01

    Woods from abroad are an important raw material to the forest products industries in the United States. A major concern in effective utilization of this resource is the lack of technical information on many species. This report presents the results of an evaluation of the mechanical properties of small, clear specimens of seven Colombian woods. These results are...

  8. Wood Properties and Kinds; A Base Syllabus on Wood Technology.

    ERIC Educational Resources Information Center

    Eastern Kentucky Univ., Richmond.

    Prepared by participants in the 1968 National Defense Education Act Institute on Wood Technology, this syllabus is one of a series of basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and content of their programs. This booklet is concerned largely with the physical composition and…

  9. Adhesives with wood materials : bond formation and performance

    Treesearch

    Charles R. Frihart; Christopher G. Hunt

    2010-01-01

    Adhesive bonding of wood plays an increasing role in the forest products industry and is a key factor for efficiently utilizing our timber resource. The main use of adhesives is in the manufacture of building materials, including plywood, oriented strandboard, particleboard, fiberboard, structural composite lumber, doors, windows and frames, and factory-laminated wood...

  10. Challenge and Response, Strategies for Survival in a Rapidly Changing Forest Products Industry

    Treesearch

    Al Schuler; Craig Adair; Paul Winistorfer

    2005-01-01

    The U.S. has long been the world's largest market for wood and wood products, fueled by its demand for wood-frame housing. But forest product markets are changing, both in terns of where the products originate (domestically or abroad),and what products are being produced and consumed.

  11. 76 FR 64318 - Multilayered Wood Flooring From the People's Republic of China: Final Determination of Sales at...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-18

    ... Parity (``Petitioner''), Style Limited, Shanghai Lizhong Wood Products Co., Ltd/The Lizhong Wood Industry... submitted case briefs on August 4, 2011. On August 9, 2011, Petitioner, Style Limited, Lumber Liquidators... Environment and Natural Resources, Forest Management Bureau (``FMB'')'s 2009 price data for lauan plywood...

  12. Public opinion and wood energy

    Treesearch

    Sarah Hitchner; John Schelhas; Teppo Hujala; J. Peter Brosius

    2014-01-01

    As wood-based bioenergy continues to develop around the world, it will utilize forestlands in new ways and will have different effects on a number of stakeholders, including forest landowners, local communities, extant industries, policymakers, investors, and others. As more stakeholders become involved in the wood energy web, and as the general public becomes more...

  13. Crossword Puzzle Makes It Fun: Introduce Green Manufacturing in Wood Technology Courses

    ERIC Educational Resources Information Center

    Iley, John L.; Hague, Doug

    2012-01-01

    Sustainable, or "green," manufacturing and its practices are becoming more and more a part of today's industry, including wood product manufacturing. This article provides introductory information on green manufacturing in wood technology and a crossword puzzle based on green manufacturing terms. The authors use the puzzle at the college level to…

  14. 77 FR 58538 - Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-21

    ... Activities; Submission to OMB for Review and Approval; Comment Request; NESHAP for the Wood Building Products...: NESHAP for the Wood Building Products Surface Coating Industry (Renewal). ICR Numbers: EPA ICR Number... transmit or otherwise disclose the information. Respondents/Affected Entities: Owners or operators of wood...

  15. Global Market Access in the Internet Era: South Africa's Wood Furniture Industry.

    ERIC Educational Resources Information Center

    Moodley, Sagren

    2002-01-01

    Explores the link between Internet connectivity and access to global markets, and uses the South African wood furniture producers as they are integrated into global value chains and exposed to the demands of more sophisticated markets. Articulates policy recommendations to promote greater diffusion of e-commerce technologies in the wood furniture…

  16. Mechanical properties evaluation of extruded wood polymer composites

    NASA Astrophysics Data System (ADS)

    Zaini, A. S. Syah M.; Rus, Anika Zafiah M.; Rahman, Norherman Abdul; Jais, Farhana Hazwanee M.; Fauzan, M. Zarif; Sufian, N. Afiqah

    2017-09-01

    The rapidly expanding of interest in the manufacture of composite materials from waste industrial and agricultural materials is due to high demand for environmentally friendly materials. Wood polymer composite (WPC) are being used in many type of applications such as in the automobile, electronic, aerospace industry and construction. Therefore, this research study is to determine the mechanical properties behaviour of WPC after an extended Ultra Violet (UV) irradiation exposure. The fabricated sample has been used and to be compared in this research is consists of rice husk, waste fibre and polypropylene (PP) with 4 different types of WPC which are wood block waste (WBW), wood block virgin (WBV), wood sheet (WS) and wood sheet waste (WSW). The extruded specimens were tested for mechanical properties such as strength under compression, puncture strength and impact resistance, and density. In addition, the specimen has been irradiated with the UV exposure at 5000 hours, 10000 hours and 15000 hours. Generally, the mechanical properties the WPC which made from the recycled material were lower than the WPC from virgin material but the density was comparable between the two products after UV irradiation exposure.

  17. Arkansas' forest products industry: perfnrmance and contribution to the State's economy, 1970 to 1980.

    Treesearch

    Con H Schallau; Wilbur R. Maki; Bennett B. Foster; Clair H. Redmond

    1987-01-01

    Accounting for one of every six basic jobs, the forest products industry in Arkansas is the second largest component of the State's economic base. Furthermore, Arkansas is the most timber-dependent State in the South. Between 1970 and 1980, employment increased in the paper and allied products segment but decreased in the wood furniture and the lumber and wood...

  18. Primary wood-product industries of Pennsylvania - 1969

    Treesearch

    James T. Bones; John K., Jr. Sherwood

    1972-01-01

    The 1969 survey of the wood-product industry showed that, since the 1964 survey in Pennsylvania: Veneer log production was down 27 percent to 15 million board feet. Total roundwood output was down 1 percent to 148.9 million cubic feet. Cooperage log production was up 52 percent to nearly 10 million board feet. Sawlog production was down less than 0.5 percent to 543...

  19. Bioreactors for lignocellulose conversion into fermentable sugars for production of high added value products.

    PubMed

    Liguori, Rossana; Ventorino, Valeria; Pepe, Olimpia; Faraco, Vincenza

    2016-01-01

    Lignocellulosic biomasses derived from dedicated crops and agro-industrial residual materials are promising renewable resources for the production of fuels and other added value bioproducts. Due to the tolerance to a wide range of environments, the dedicated crops can be cultivated on marginal lands, avoiding conflict with food production and having beneficial effects on the environment. Besides, the agro-industrial residual materials represent an abundant, available, and cheap source of bioproducts that completely cut out the economical and environmental issues related to the cultivation of energy crops. Different processing steps like pretreatment, hydrolysis and microbial fermentation are needed to convert biomass into added value bioproducts. The reactor configuration, the operative conditions, and the operation mode of the conversion processes are crucial parameters for a high yield and productivity of the biomass bioconversion process. This review summarizes the last progresses in the bioreactor field, with main attention on the new configurations and the agitation systems, for conversion of dedicated energy crops (Arundo donax) and residual materials (corn stover, wheat straw, mesquite wood, agave bagasse, fruit and citrus peel wastes, sunflower seed hull, switchgrass, poplar sawdust, cogon grass, sugarcane bagasse, sunflower seed hull, and poplar wood) into sugars and ethanol. The main novelty of this review is its focus on reactor components and properties.

  20. Jackfruit (Artocarpus heterophyllus lamk) wood waste as a textile natural dye by micowave-assisted extraction method

    NASA Astrophysics Data System (ADS)

    Qadariyah, Lailatul; Gala, Selfina; Widoretno, Dhaniar Rulandri; Kunhermanti, Delita; Bhuana, Donny S.; Sumarno, Mahfud, Mahfud

    2017-05-01

    The development of technology causes most of textile industries in Indonesia prefer to use synthetic dyes in the fabric dyeing process. In fact, synthetic dyes is able to have negative effect since it is is toxic to the health of workers and environment. To resolve this issues, one way to do is to use natural dyes. One of untapped potential in Indonesia is wood waste of jackfruit from furniture industry. Jackfruit wood itself containing dyestuffs which gives yellow color pigment so that it can be used as an alternative source of natural dyes. The purpose of this research is to study the effect of extraction time, mass to solvent volume ratio, and microwave power to yield of dyes. The extract of dye analyzed by UV-Visible Spectrophotometer and GC-MS, along the coloring and endurance tests of natural dyes on fabric and compare it with synthetic dyes. In this research, material is going to be extracted is the wood of jackfruit (Artocarpus heterophyllus lamk) with material size between 35 mesh - 60 mesh. The extraction process is done by using ethanol 96%. Extraction using MAE is carried out at the ratio of materials to solvent of 0,02-0,1 g/mL, the microwave power of 100-800 Watt, and the extraction time of 10-90 minutes. The conclusion is at microwave power of 400 Watt, material to solvent ratio of the 0,02 g/mL, the yield is 3,39% while at microwave power of 600 Watt, material to solvent ratio of the 0,02 g/mL, the yield is 3,67% with extraction time of 30 minutes. The highest recovery from ethanol 96% solvent is 60,41%. The result of UV-Vis Spectrophotometry and GC-MS test show that there is a chromophore compound in the extract of natural dye. The test results show the natural dyes of jackfruit wood can be used to coloring on the textile because it can gives staining result permanently.

  1. Planning Civilian Reuse of Former Military Base. Revision

    DTIC Science & Technology

    1990-08-01

    potential de- private sector- into one comprehensive policy group which /elopment. For these reasons, the leadership of the impacted , ommunity should focus...services, Its tourism and recreational resources, and (if any) should be emphasized? its educational and health resources, among others. The de- In...highly attractive industrial industial heat. structures for processing the regions wood resources ito Historic Development and Tourism : Burlington, New

  2. Substantial production of drosophilin A methyl ether (tetrachloro-1,4-dimethoxybenzene) by the lignicolous basidiomycete Phellinus badius in the heartwood of mesquite (Prosopis juliflora) trees

    Treesearch

    Laurence A.J. Garvie; Barry Wilkens; Thomas L. Groy; Jessie A. Glaeser

    2015-01-01

    Toxic organohalogen pollutants produced as byproducts of industrial processes, such as chloroform and polychlorinated dibenzo-p-dioxins, also have significant natural sources. A substantial terrestrial source of halogenated organics originates from fungal decay of wood and leaf litter. Here we show that the lignicolous basidiomycete ...

  3. Commercialization of biopulping: an energy-saving and environmentally-friendly technology for the paper industry

    Treesearch

    Ross Swaney; Masood Akhtar; Eric Horn; Michael Lentz; Carl Houtman; John Klungness

    2003-01-01

    The biopulping process for treating wood chips prior to mechanical pulping has been scaled up through an extensive development program and has been demonstrated at 50 ton semicommercial scale. Detailed engineering analyses and design studies have been performed for full production-scale mill implementation, and the technology is ready for commercial use. This paper...

  4. CT Image Sequence Processing For Wood Defect Recognition

    Treesearch

    Dongping Zhu; R.W. Conners; Philip A. Araman

    1991-01-01

    The research reported in this paper explores a non-destructive testing application of x-ray computed tomography (CT) in the forest products industry. This application involves a computer vision system that uses CT to locate and identify internal defects in hardwood logs. The knowledge of log defects is critical in deciding whether to veneer or to saw up a log, and how...

  5. Occupational exposure to wood dust and risk of nasal and nasopharyngeal cancer: A case-control study among men in four nordic countries-With an emphasis on nasal adenocarcinoma.

    PubMed

    Siew, Sie Sie; Martinsen, Jan Ivar; Kjaerheim, Kristina; Sparén, Pär; Tryggvadottir, Laufey; Weiderpass, Elisabete; Pukkala, Eero

    2017-12-15

    The current study aims to provide stronger evidence to aid in our understanding of the role of cumulative occupational exposure to (softwood-dominated) mixed wood dust in aetiology of nasal cancer. We included broad exposure occurred in a range of wood-processing occupation across varied industries in four Nordic countries. A population-based case-control study was conducted on all male cases with nasal adenocarcinoma (393 cases), other types of nasal cancer (2,446) and nasopharyngeal cancer (1,747) diagnosed in Finland, Sweden, Norway and Iceland between 1961 and 2005. For each case, five male controls, who were alive at the time of diagnosis of the case (index date), were randomly selected, matched by birth-year and country. Cumulative exposures (CE)s to wood dust and formaldehyde before the index date were quantified based on a job-exposure matrix linked to occupational titles derived from population censuses. Hazard ratios (HRs) for the CE of wood dust were estimated by conditional logistic regression, adjusted for CE to formaldehyde and 95% confidence intervals (CIs) were calculated. There was an increasing risk of nasal adenocarcinoma related to wood dust exposure. The HR in the highest CE category of wood dust (≥ 28.82 mg/m 3 -years) was 16.5 (95% CI 5.05-54.1). Neither nonadenocarcinoma of the nose nor nasopharyngeal cancer could be linked to wood dust exposure. CE to softwood-dominated mixed wood dusts is strongly linked with elevated risk in nasal adenocarcinoma but not with other types of nasal or nasopharyngeal cancer. © 2017 UICC.

  6. Ultrasound assisted extraction of natural dye from jackfruit's wood (Artocarpus heterophyllus): The effect of ethanol concentration as a solvent

    NASA Astrophysics Data System (ADS)

    Febriana, Ike Dayi; Gala, Selfina; Mahfud, Mahfud

    2017-05-01

    Azo dye are synthetic organic dyes which has an azo group (- N = N -) as chromophore. Azo dye is resistand to decomposition process and harmfull for the environment and human being. Natural dye can be used as substitution of azo dye at textile industry. Natural dye are eco - friendly and can be applied for dyeing of fibrous material. Natural dye can be obtained from natural origin such as leaves, wood, or roots. The wood of jackfruit (Artocarpus heterophyllus) can used as natural source of natural dye. Ultrasound assisted extraction (UAE) is a new method that can be used to extract natural dye from jackfruit's wood. The aim of this research are to study about influence of ethanol concentration as solvent and extraction kinetic. Jackfruit's wood dust from sawmill used for the experimentation were sifted by sieve 35 mesh. Ethanol 96% used as solvent of this experiment and varied the concentration in volume to volume ratio (v/v). Experiment were carried out from 20 to 50 minutes. The result of this experiment shows that ethanol concentration influenced yield of extraction from jackfruit's wood. Concentration of ethanol will be affected polarity of solvent. The Peleg model was used to describe about kinetic model of natural dye extraction. Value of k1 and k2 constant are 0.003835 and 0.04186 respectively.

  7. Maximizing wood Failure

    Treesearch

    Peter Koch

    1965-01-01

    The durability of plywood bonds in exterior exposure is commonly measured indirectly by failing wetted specimens in shear; a high percentage of wood failure is accepted in the industry as evidence that the gluebond will be durable.

  8. Production facility site selection factors for Texas value-added wood producers

    Treesearch

    Judd H. Michael; Joanna Teitel; James E. Granskog

    1998-01-01

    Value-added wood products manufacturers serve an important role in the economies of many U.S. regions and are therefore sought after by entities such as economic development agencies. The reasons why certain locations for a prospective prodution facility would be more attractive to secondary wood industry producers are not clearly understood. Therefore, this research...

  9. An investigation into the potential of ionic silver as a wood preservative

    Treesearch

    Benjamin Dorau; Rachel Arango; Frederick Green

    2004-01-01

    On December 3 1, 2003, the wood preservation industry, in conjunction with the Environmental Protection Agency, voluntarily phased out the use of chromated copper arsenate (CCA)-treated lumber for residential applications. This ended over 25 years of CCA as the predominant wood preservative in the United States. The first generation of replacement preservatives,...

  10. Wood thermoplastic composites

    Treesearch

    Daniel F. Caulfield; Craig Clemons; Rodney E. Jacobson; Roger M. Rowell

    2005-01-01

    The term “wood-plastic composites” refers to any number of composites that contain wood (of any form) and either thermoset or thermoplastic polymers. Thermosets or thermoset polymers are plastics that, once cured, cannot be remelted by heating. These include cured resins, such as epoxies and phenolics, plastics with which the forest products industry is most familiar (...

  11. Effect of Bioenergy Demands and Supply Response on Markets, Carbon, and Land Use

    Treesearch

    Karen L. Abt; Robert C. Abt; Christopher Galik

    2012-01-01

    An increase in the demand for wood for energy, including liquid fuels, bioelectricity, and pellets, has the potential to affect traditional wood users, forestland uses, management intensities, and, ultimately, carbon sequestration. Recent studies have shown that increases in bioenergy harvests could lead to displacement of traditional wood-using industries in the short...

  12. Leaching of flakeboard produced from recycled CCA-treated wood into deionized water

    Treesearch

    W. Li; T.F. Shupe; Chung-Yun Hse

    2004-01-01

    The disposal of preservative-treated wood is becoming a larger issue for the forest products industry due to increasing public concern and scrutiny as well as costs associated with traditional disposal, i.e., landfilling. Recycling of preservative-treated wood has great potential. In this study, flakeboard was produced from decommissioned guardrail posts that had been...

  13. Marketing recommendations for wood products from Alaska birch, red alder, and Alaska yellow-cedar.

    Treesearch

    Geoffrey H. Donovan; David L. Nicholls; Joseph. Roos

    2003-01-01

    Several factors have contributed to a recent decline in Alaska’s wood products industry, including reduced exports to Japan and the closure of two pulp mills in southeast Alaska. However, higher value niche markets are a potential growth area for the industry. In this paper, we consider niche markets for three species that have historically been harvested in low...

  14. Changes in output of industrial timber products in Virginia, 1976-1978

    Treesearch

    Richard L. Welch; Thomas R. Bellamy

    1980-01-01

    Almost 360 million cubic feet of industrial roundwood products were harvested from Virginia’s forest in 1978, and an estimates 137 million cubic feet of wood residues were left in the forests. Virginia shipped 41 million cubic feet of roundwood products to plants outside the State, and Virginia plants received 65 million cubic feet of out-of-state wood. Over 75 percent...

  15. Effect of oak wood barrel capacity and utilization time on phenolic and sensorial profile evolution of an Encruzado white wine.

    PubMed

    Nunes, Paulo; Muxagata, Sara; Correia, Ana C; Nunes, Fernando M; Cosme, Fernanda; Jordão, António M

    2017-11-01

    Several studies have reported the influence of diverse winemaking technologies in white wine characteristics. However, the impact of the use of different oak wood barrel capacities and utilization time on the evolution of white wine phenolic content and sensorial characteristics are not usually considered. Thus the aim of this work was to evaluate the effect of oak wood barrel capacity and utilization time on the evolution of phenolic compounds, browning potential index and sensorial profile of an Encruzado white wine. For the 180 aging days considered, the use of new oak wood barrels induced a greater increase in global phenolic composition, including several individual compounds, such as gallic and ellagic acid, independently of the barrel capacity. Tendency for a lesser increase of the browning potential index values was detected for white wines aged in new oak wood barrels. The sensorial profile evolution, showed significant differences only for the aroma descriptors, namely for 'wood aroma' and 'aroma intensity', white wine aged in 225 L new oak wood barrels being the highest scored. The results show that, in general, the use of different capacities and utilization time of oak wood barrels used for white wine aging could play an important role in white wine quality. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  16. DNA Damage among Wood Workers Assessed with the Comet Assay

    PubMed Central

    Bruschweiler, Evin Danisman; Wild, Pascal; Huynh, Cong Khanh; Savova-Bianchi, Dessislava; Danuser, Brigitta; Hopf, Nancy B.

    2016-01-01

    Exposure to wood dust, a human carcinogen, is common in wood-related industries, and millions of workers are occupationally exposed to wood dust worldwide. The comet assay is a rapid, simple, and sensitive method for determining DNA damage. The objective of this study was to investigate the DNA damage associated with occupational exposure to wood dust using the comet assay (peripheral blood samples) among nonsmoking wood workers (n = 31, furniture and construction workers) and controls (n = 19). DNA damage was greater in the group exposed to composite wood products compared to the group exposed to natural woods and controls (P < 0.001). No difference in DNA damage was observed between workers exposed to natural woods and controls (P = 0.13). Duration of exposure and current dust concentrations had no effect on DNA damage. In future studies, workers’ exposures should include cumulative dust concentrations and exposures originating from the binders used in composite wood products. PMID:27398027

  17. REGULATORY PERSPECTIVE ON MANAGING RISKS AT ...

    EPA Pesticide Factsheets

    Over 700 sites in the United States have been identified where wood preserving operations have been conducted. The most common types of wood preservatives found at these sites are creosote, pentachlorophenol (PCP), and copper chromated arsenate (CCA). When properly used and disposed of, these preservatives do not impose a significant health risk. However, due to operating procedures (many of which were accepted industry practices at the time), wood treating operations have contributed to soil and groundwater contamination. Primary sources of pollution at these sites are lagoons, waste ponds, drip raacki areas and chemical storage and treatment tanks. To better understand the risks associated with the use of wood preserving compounds, it is important to identify the constituents of concern. Creosote is produced as a distillate from coal tar and hence, is a variable mixture of hundreds of compounds, mostly semivolatile organics (SVOCs). Polynuclear Aromatic Hydrocarbons (PAHs) generally, account for up to 85%, by weight, of the chemical constituents found in undiluted creosote. Genetic toxicity if individual PAHs increase with m,olecular weight. USEPA has determined that 7 PAHs are probable human carcinogens and has set forth order-of-magnitue relative potency factors for these constituents, Pentachlorophenol (PCP0 is another preservative used in wood preserving processes and is prepared by dissolving technical grade PCP in oil to produce a solution that

  18. The Bending Strength, Internal Bonding and Thickness Swelling of a Five Layer Sandwiched Bamboo Particleboard

    NASA Astrophysics Data System (ADS)

    Jamaludin, M. A.; Bahari, S. A.; Nordin, K.; Soh, T. F. T.

    2010-03-01

    The demand for wood based material is increasing but the supply is decreasing. Therefore the price of these raw materials has increased. Bamboo provides an economically feasible alternative raw material for the wood based industry. Its properties are comparable to wood. It is also compatible with the existing processing technology. Bamboo is in abundance, easy to propagate and of short maturation period. Bamboo provides a cheaper alternative resource for the wood based industry. The development of new structural components from bamboo will widen its area of application from handicrafts to furniture and building components. In this study, five layer sandwiched bamboo particleboard were manufactured. The sandwiched Bamboo PB consists of a bamboo PB core, oil palm middle veneers and thin meranti surface veneers. The physical and mechanical properties of the bamboo sandwiched particleboards were tested in accordance to the BS-EN 317:1993 [1] and BS-EN 310:1993 [2], respectively. All the samples passed the standards. The modulus of elasticity was about 352% higher than the value specified in the BS standard, BS-EN 312-4:1996 [3]. The Internal bonding was about 23% higher than the general requirements specified in the standard. On the other hand, the thickness swelling was about 6% lower than the standard. No glue line failure was observed in the strength tests. Critical failures in the IB tests were observed in the particleboards. Tension failures were observed in the surface veneers in the bending tests. The five layer sandwiched bamboo particleboard can be used for light weight construction such as furniture, and wall and door panels in buildings.

  19. Continuous microcellular foaming of polyvinyl chloride and compatibilization of polyvinyl chloride and polylactide composites

    NASA Astrophysics Data System (ADS)

    Shah, Bhavesh

    This dissertation focuses on overcoming existing limitations of WPCs which prevent them from realizing their full market potential. These limitations include: (i) lack of a continuous extrusion process for microcellular foaming of polyvinyl chloride (PVC) and its composites using supercritical fluids to reduce the high density of the WPCs, (ii) need for an efficient coupling agent for WPCs to overcome the poor compatibility between wood and plastic, and (iii) unproven use of wood as a filler for the biopolymer polylactide (PLA) to make "green" composites. These limitations were addressed through experimentation to develop a continuous extrusion process for microcellular foaming, and through surface modification of wood flour using natural coupling agents. The effects of wood flour, acrylic modifier and plasticizer content on the rheological properties of PVC based WPCs were studied using an extrusion capillary rheometer and a two-level factorial design. Wood flour content and acrylic modifier content were the major factors affecting the die swell ratio. Addition of plasticizer decreased the true viscosity of unfilled and filled PVC, irrespective of the acrylic modifier content. However, the addition of acrylic modifier significantly increased the viscosity of unfilled PVC but decreased the composite viscosity. Results of the rheological study were used to set baseline conditions for the continuous extrusion foaming of PVC WPCs using supercritical CO 2. Effects of material composition and processing conditions on the morphology of foamed samples were investigated. Foamed samples were produced using various material compositions and processing conditions, but steady-state conditions could not be obtained for PVC. Thus the relationships could not be determined. Incompatibility between wood flour and PVC was the focus of another study. The natural polymers chitin and chitosan were used as novel coupling agents to improve interfacial adhesion between the polymer matrix and wood fiber. Results indicated that addition of chitin and chitosan significantly increased the flexural properties and storage modulus of PVC WPCs, compared to composites without coupling agent. Significant improvements were attained with 0.5 wt. % chitosan and with 6.67 wt. % chitin. Based on the efficiency of chitosan as a coupling agent for PVC based WPCs, a biodegradable composite using polylactide (PLA) and chitosan was developed. Wood flour (0--40 wt. %) was evaluated as a filler for PLA composites and its effect on mechanical, thermal and chemical properties was studied with and without chitosan (0--10 wt. %). Addition of wood flour significantly increased the flexural and storage moduli of PLA-wood flour composites, but had no effect on glass transition temperature (Tg). Chitosan had no significant effect on any of the properties of the composites studied. Development of an efficient and effective coupling agent for PVC wood composite is a significant development which will increase performance while reducing cost. Wood filled PLA composites can further expand WPCs into applications such as packaging and automotive. Results from these studies have broadened the current knowledge base for WPC products and will be useful in the continued expansion of wood composites technology into a variety of industries.

  20. Using Acoustic Sensors to Improve the Efficiency of the Forest Value Chain in Canada: A Case Study with Laminated Veneer Lumber

    PubMed Central

    Achim, Alexis; Paradis, Normand; Carter, Peter; Hernández, Roger E.

    2011-01-01

    Engineered wood products for structural use must meet minimum strength and stiffness criteria. This represents a major challenge for the industry as the mechanical properties of the wood resource are inherently variable. We report on a case study that was conducted in a laminated veneer lumber (LVL) mill in order to test the potential of an acoustic sensor to predict structural properties of the wood resource prior to processing. A population of 266 recently harvested aspen logs were segregated into three sub-populations based on measurements of longitudinal acoustic speed in wood using a hand tool equipped with a resonance-based acoustic sensor. Each of the three sub-populations were peeled into veneer sheets and graded for stiffness with an ultrasonic device. The average ultrasonic propagation time (UPT) of each subpopulation was 418, 440 and 453 microseconds for the green, blue, and red populations, respectively. This resulted in contrasting proportions of structural veneer grades, indicating that the efficiency of the forest value chain could be improved using acoustic sensors. A linear regression analysis also showed that the dynamic modulus of elasticity (MOE) of LVL was strongly related to static MOE (R2 = 0.83), which suggests that acoustic tools may be used for quality control during the production process. PMID:22163922

  1. A technical assessment of the market for wood windows in Japanese post and beam construction

    Treesearch

    J. Roos; P. Boardman; I. Eastin

    2004-01-01

    This research was conducted to develop a better understanding of the problems and opportunities confronting U.S. wood window manufacturers in the post and beam segment of the Japanese residential construction industry. The specific objectives of this research were to (1) provide a description of the Japanese market for wood windows; (2) survey Japanese builders...

  2. Potential for Particulate Emission Reduction in Flue Gas Condensing Heat Exchangers in Biomass-Fired Boiler

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Butcher, Thomas A.

    Direct biomass combustion for the production of heat is a broad field of technology which ranges from residential wood stoves to commercial and industrial boilers and furnaces. Fuels typically include pellets, chips and cord wood. Over the past decade, as a result of fuel price advantages and other benefits, wood burning has seen a significant growth.

  3. Effect of Intensive Forest Management Practices on Wood Properties and Pulp Yield of Young, Fast Growing Southern Pine

    Treesearch

    Timothy D. Faust; Alexander Clark; Charles E. Courchene; Barry D. Shiver; Monique L. Belli

    1999-01-01

    The demand for southern pine fiber is increasing. However, the land resources to produce wood fiber are decreasing. The wood industry is now using intensive cultural treatments, such as competition control, fertilization, and short rotations, to increase fiber production. The impact of these intensive environmental treatments on increased growth is positive and...

  4. 77 FR 39985 - Information Collection; Forest Industries and Residential Fuelwood and Post Data Collection Systems

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-06

    ...-pulp or composite panel, primary wood-using mills, including small, part-time mills, as well as large... 1978 require the Forest Service to evaluate trends in the use of logs and wood chips, to forecast anticipated levels of logs and wood chips, and to analyze changes in the harvest of these resources from the...

  5. Hardwoods in U.S. wood pallet production

    Treesearch

    Robert J. Bush; Philip A. Araman; E. Bradley Hager

    2011-01-01

    Research indicates that in 2006, 7.26 billion board feet (approximately 17.1 million m3) of new solid wood was utilized by the U.S. wood pallet and container manufacturing industry. During the same year, the study estimates that 5.09 billion board feet (approximately 12.0 million m3) were recovered mostly from used pallets for reuse and recycling. This paper reports...

  6. Consumer willingness to pay for a naturally decay-resistant wood product.

    Treesearch

    Geoffrey Donovan; Hayley Hesseln

    2004-01-01

    Chromated copper arsenate (CCA) is the most widely used chemical wood preservative in the United States. Concerns about the safety of CCA led to an agreement between the Environmental Protection Agency and the wood treatment industry to withdraw CCA for nonindustrial uses by the end of 2003. In light of the publicity surrounding the withdrawal of CCA, this article...

  7. Southern pulpwood production, 1966

    Treesearch

    Dwane D. Van Hooser; Joe F. Christopher

    1967-01-01

    Pulpwood production in the South rose 7 percent in 1966, to 33,061,243 cords. This is the highest output on record and the ninth consecutive increase in annual production. Pine round-wood accounted for 57 percent of the increase, and residues or byproducts from other wood-using industries, 26 percent. The remainder was due to an increase in the harvest of hard-wood...

  8. Amino acids in modern and fossil woods

    NASA Technical Reports Server (NTRS)

    Lee, C.; Bada, J. L.; Peterson, E.

    1976-01-01

    The amino acid composition and the extent of racemization in several modern and fossil woods are reported. The method of analysis is described, and data are presented on the total amino acid concentration, the amino acid ratios, and the enantiomeric ratios in each sample. It is found that the amino acid concentration per gram of dry wood decreases with age of the sample, that the extent of racemization increases with increasing age, and that the amounts of aspartic acid, threonine, and serine decrease relative to valine with increasing age. The relative racemization rates of amino acids in wood, bone, and aqueous solution are compared, and it is shown that racemization in wood is much slower than in bone or aqueous solution. Racemization results for woods from the Kalambo Falls area of Zambia are used to calculate a minimum age of 110,000 years for the transition between the Sangoan and Acheulian industries at that site. This result is shown to be consistent with numerous radiometric dates for older Acheulian sites in Africa and to compare well with geologically inferred dates for the beginning of the Eemian and the end of the Acheulian industry in southern Africa.

  9. Research determines intelligent consumption of forest products is growing and saving trees - an example with wooden pallets

    Treesearch

    Philip A. Araman; Robert J. Bush; Bruce Hansen

    2001-01-01

    Wooden pallets help transport, store and sell products demanded by all of us. As our population and product demands increase, so do the demands for wooden pallets. We will present data on the industrial demands for wooden pallets. We will explain how increased demands for wood pallets in the US have required less new wood from trees and show that the pallet industry is...

  10. Illinois timber industry-an assessment of timber product output and use, 1996.

    Treesearch

    Ronald L. Hackett; John A. Sester

    1998-01-01

    In this bulletin we discuss recent forest industry trends and report the results of a detailed study of forest industry, industrial roundwood production, and associated primary mill wood and bark residue in Illinois in 1996.

  11. 40 CFR 60.2245 - What is an air curtain incinerator?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Industrial Solid Waste Incineration Units for Which Construction Is Commenced After November 30, 1999 or for....2260). (1) 100 percent wood waste. (2) 100 percent clean lumber. (3) 100 percent mixture of only wood...

  12. Louisiana’s timber industry-timber product output and use, 2013

    Treesearch

    James A. Gray; James W. Bentley; Jason A. Cooper; David J. Wall

    2017-01-01

    In 2013, processing of primary products in Louisiana mills gener-ated 206.7 million cubic feet of wood and bark residues. Coarse residues from all primary products amounted to 76.9 million cubic feet, while bark volume totaled 68.3 million cubic feet. Collective-ly, sawdust and shavings made up 30 percent of total residues, or 61.4 million cubic feet (fig. 7).

  13. The Growing Role of Trade as A Development Assistance Mechanism.

    DTIC Science & Technology

    1981-08-11

    emphasizing that these elements should accompany foreign 1/Approved crops include cashew nuts , cocoa, coconut, coffee, durian, mangosteen, manila hemp, palm...products; essen- tial oils; spices; forest products (e.g., rattan and resins); tobacco; tea; nuts . --Industrial products: plywood and processed wood...Gabon and Ivory Coast (timber), Ethiopia (coffee), Benin (cotton), Tanzania (sisal), Niger and Senegal (ground nuts ), Mauritania (iron ore). SYSTEM FOR

  14. JPRS Report, East Europe

    DTIC Science & Technology

    1990-04-24

    in the wood processing industry, ecologically sound construction of facilities for storage of wastes from International exchange of scientific...from natural disasters and ecolog - ical catastrophes. [Szymanderski] And I was well received there. I thank The question arises as to whether the Army...able to waste money on some segment of of possible ecological catastrophe or natural disasters social life-that is first-and second, the Army is an

  15. Fewer pallets reaching landfills, more are processed for recovery

    Treesearch

    Robert J. Bush; Daryl T. Corr; Philip A. Araman

    2001-01-01

    The Virginia Tech Center for Forest Products Marketing and Management estimates that the pallet industry received 171 million pallets in 1995 (containing 2.6 billion board feet of wood) for the purpose of reuse and recycling. We estimate that this figure grew to just short of 300 million pallets in 1999. This means that over one-third of the material used for pallets...

  16. Not Just Lumber—Using Wood in the Sustainable Future of Materials, Chemicals, and Fuels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jakes, Joseph E.; Arzola, Xavier; Bergman, Rick

    Forest-derived biomaterials can play an integral role in a sustainable and renewable future. Research across a range of disciplines is required to develop the knowledge necessary to overcome the challenges of incorporating more renewable forest resources in materials, chemicals, and fuels. We focus on wood specifically because in our view, better characterization of wood as a raw material and as a feedstock will lead to its increased utilization. We first give an overview of wood structure and chemical composition and then highlight current topics in forest products research, including (1) industrial chemicals, biofuels, and energy from woody materials; (2) wood-basedmore » activated carbon and carbon nanostructures; (3) development of improved wood protection treatments; (4) massive timber construction; (5) wood as a bioinspiring material; and (6) atomic simulations of wood polymers. We conclude with a discussion of the sustainability of wood as a renewable forest resource.« less

  17. Not Just Lumber—Using Wood in the Sustainable Future of Materials, Chemicals, and Fuels

    NASA Astrophysics Data System (ADS)

    Jakes, Joseph E.; Arzola, Xavier; Bergman, Rick; Ciesielski, Peter; Hunt, Christopher G.; Rahbar, Nima; Tshabalala, Mandla; Wiedenhoeft, Alex C.; Zelinka, Samuel L.

    2016-09-01

    Forest-derived biomaterials can play an integral role in a sustainable and renewable future. Research across a range of disciplines is required to develop the knowledge necessary to overcome the challenges of incorporating more renewable forest resources in materials, chemicals, and fuels. We focus on wood specifically because in our view, better characterization of wood as a raw material and as a feedstock will lead to its increased utilization. We first give an overview of wood structure and chemical composition and then highlight current topics in forest products research, including (1) industrial chemicals, biofuels, and energy from woody materials; (2) wood-based activated carbon and carbon nanostructures; (3) development of improved wood protection treatments; (4) massive timber construction; (5) wood as a bioinspiring material; and (6) atomic simulations of wood polymers. We conclude with a discussion of the sustainability of wood as a renewable forest resource.

  18. Cornstalk as a source of fiber and energy

    Treesearch

    Aziz Ahmed; J. Y. Zhu

    2006-01-01

    Wood is the major source of fiber supply. Non-wood fibers are mainly used in papermaking where there is a lack of forest resource such as in China and India. Cornstalk, among the agricultural residues and other non-wood fiber, is the most promising source of fiber. However, The usage of cornstalks is very limited in pulp and paper industry, although nearly 284 million...

  19. The greenhouse gas and energy impacts of using wood instead of alternatives in residential construction in the United States

    Treesearch

    Brad Upton; Reid Miner; Mike Spinney; Linda S. Heath

    2008-01-01

    Data developed by the Consortium for Research on Renewable Industrial Materials were used to estimate savings of greenhouse gas emissions and energy consumption associated with use of wood-based building materials in residential construction in the United States. Results indicate that houses with wood-based wall systems require 15-16% less total energy for non-heating/...

  20. Temporal dominance of sensations and preferences of Brazilians and Slovakians: A cross-cultural study of cachaças stored with woods from the Amazon rainforest.

    PubMed

    Simioni, Síntia Carla Corrêa; Tovar, Diego Mercado; Rodrigues, Jéssica Ferreira; de Souza, Vanessa Rios; Nunes, Cleiton Antônio; Vietoris, Vladimir; Pinheiro, Ana Carla Marques

    2018-02-01

    Brazilians and Slovakians evaluated the temporal profile and the acceptability of cachaça stored with different woods (Cumarurana (CM), Jatobá (JT) and, Louro-vermelho (LV), which are found in the Amazon rainforest, and also oak), with the aim of performing a cross-cultural comparison of the dynamic profile of the attributes perceived in the cachaças and the sensorial acceptance of the samples. Important differences were observed between the temporal sensorial profiles generated by the two groups and their preferences. Brazilians preferred cachaças stored with the traditional wood, oak, followed by those stored with JT and CM. In contrast, Slovakians preferred cachaças stored with JT, followed by those stored with LV and oak. For both countries, the dominance of wood flavor and vanilla attributes at the end of the analysis time was positively associated with acceptance, while the dominance of off-flavors and the wood flavor attribute at the beginning of the analysis time was negatively associated with acceptance for Brazilians and Slovakians, respectively. Brazilians preferred cachaça stored with oak wood, and Slovakians preferred cachaça stored with JT wood, with acceptability being strongly associated with the dominance of wood flavor and vanilla attributes at the end of the evaluation time. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

  1. Fogwater chemistry in a wood-burning community, western Oregon.

    PubMed

    Muir, P S

    1991-01-01

    Fogwater chemistry in Corvallis, Oregon, a wood-burning community (pop. approximately 43,000) was compared with the chemistry of fogwater collected in more remote and in more highly industrialized areas. The fogwater was not acidic (median pH = 5.7) and was usually dominated by SO4=, NO3-, and NH4+ whose concentrations were generally lower than in fogwater in other urban areas but higher than in remote areas. Concentrations of formic and acetic acids (medians = 61 and 52 microN, respectively) were comparable to those in fogwater in Los Angeles, California and were typically much higher than concentrations in fogwater from more remote areas. Formate and acetate concentrations were often comparable to those of SO4= and NO3-. Formaldehyde concentrations (range = 0.4-3.0 mg L-1) were comparable to those in fogwater in some urban areas of southern California, yet lower than concentrations in highly industrialized areas of southern California. Because concentrations of organic compounds in Corvallis fogwater were often comparable to those in larger urban areas, sources in addition to motor vehicles must be important in Corvallis. Additional sources may be natural and anthropogenic, the latter including residential wood burning and wood products industries.

  2. Process-based control of HAPs emissions from drying wood flakes.

    PubMed

    Banerjee, Sujit; Pendyala, Krishna; Buchanan, Mike; Yang, Rallming; Abu-Daabes, Malyuba; Otwell, Lawrence P E

    2006-04-01

    Industrial wood flake drying generates methanol, formaldehyde, and other hazardous air pollutants (HAPs). A simple theoretical model shows that particles smaller than 400 microm will begin to thermally degrade and release disproportionately large quantities of HAPs. This is confirmed in full-scale practice where particles smaller than 500 microm show visible signs of charring. Laboratory measurement of the activation energy for the breakdown of wood tissue into methanol and formaldehyde led to a value of about 17 kcal/mol. The apparent activation energy measured in the field was higher. This result was obtained under nonisothermal conditions and is biased high by the fines fraction of the furnish, which is exposed to elevated temperatures. It is proposed that a combination of screening out the fines fraction smaller than 500 microm and reducing the dryer inlet temperature will substantially reduce emissions, possibly to the point where control devices can be downsized or eliminated. Our findings allow these HAPs reductions to be semiquantitatively estimated.

  3. Quantifying the environmental impact of an integrated human/industrial-natural system using life cycle assessment; a case study on a forest and wood processing chain.

    PubMed

    Schaubroeck, Thomas; Alvarenga, Rodrigo A F; Verheyen, Kris; Muys, Bart; Dewulf, Jo

    2013-01-01

    Life Cycle Assessment (LCA) is a tool to assess the environmental sustainability of a product; it quantifies the environmental impact of a product's life cycle. In conventional LCAs, the boundaries of a product's life cycle are limited to the human/industrial system, the technosphere. Ecosystems, which provide resources to and take up emissions from the technosphere, are not included in those boundaries. However, similar to the technosphere, ecosystems also have an impact on their (surrounding) environment through their resource usage (e.g., nutrients) and emissions (e.g., CH4). We therefore propose a LCA framework to assess the impact of integrated Techno-Ecological Systems (TES), comprising relevant ecosystems and the technosphere. In our framework, ecosystems are accounted for in the same manner as technosphere compartments. Also, the remediating effect of uptake of pollutants, an ecosystem service, is considered. A case study was performed on a TES of sawn timber production encompassing wood growth in an intensively managed forest ecosystem and further industrial processing. Results show that the managed forest accounted for almost all resource usage and biodiversity loss through land occupation but also for a remediating effect on human health, mostly via capture of airborne fine particles. These findings illustrate the potential relevance of including ecosystems in the product's life cycle of a LCA, though further research is needed to better quantify the environmental impact of TES.

  4. Superfund Record of Decision (EPA Region 6): Lincoln Creosote Site, Bossier City, LA, November 26, 1997

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1998-10-01

    The Lincoln Creosote Site (Site) is located in Bossier City, Louisiana, and consists of a 20-acre industrial area that includes the former location of a wood treatment plant. Wood products such as railroad ties and utility poles were pressure treated at the plant, using creosote, chromated copper-arsenate (CCA) and pentachlorophenol (PCP) as wood preservatives. The compounds used for wood treatment contained metals, a number of semi-volatile organic base-neutral extractable compounds such as polynuclear aromatic hydrocarbon (PAHs). EPA`s selected removal action called for excavation of residential soils containing concentrations of wood treatment product residuals.

  5. Lake states primary forest industry and timber use, 1975.

    Treesearch

    James E. Blyth; James W. Whipple; Allen H. Boelter; Steven Wilhelm

    1980-01-01

    Discusses industrial roundwood production and forest industry trends in Michigan, Minnesota, and Wisconsin. Compares log and bolt production by state for several products and species and discusses primary wood-using mill residue and its use.

  6. Forest sector and primary forest products industry contributions to the economies of the southern states: 2011 update

    Treesearch

    Consuelo Brandeis; Donald G. Hodges

    2015-01-01

    The analysis in this article provides an update on the southern forest sector economic activity after the downturn experienced in 2008–2009. The analysis was conducted using Impact Analysis for Planning (IMPLAN) software and data sets for 2009 and 2011 and results from the USDA Forest Service Timber Products Output latest survey of primary wood processing mills....

  7. Development of Thermophysical Hydrocarbon Wastes Pyrolysis Model (in the Case of Wood)

    NASA Astrophysics Data System (ADS)

    Shantarin, V. D.; Zemenkova, M. Yu; Zemenkov, Yu D.

    2016-10-01

    The article is devoted to solving environmental problems in the operation in oil and gas industry objects. Reduction of environmental damage by pollution with hydrocarbons can be achieved by disposing oil-contaminated hydrocarbon wastes, using high-temperature pyrolysis process. Authors proposed a recycling method by which in the output there generates the maximum amount of syngas, which, in its turn, is an expensive resource

  8. Technology Insertion (TI)/Industrial Process Improvement (IPI) Task Order Number 1. Data Base Documentation Book for WR-ALC/MANPSB (Sheet Metal)

    DTIC Science & Technology

    1989-08-14

    peel the cover skins using a wood chisel, tin snips, pliars, etc. to remove the skin without damaging the wires or the heating elements. O.5T-.3...called " Banana Boxes" because they are about the same shape and construction as the boxes used to ship bananas . These boxes would be similar to the ones

  9. Genetic bases of fungal white rot wood decay predicted by phylogenomic analysis of correlated gene-phenotype evolution

    Treesearch

    László G. Nagy; Robert Riley; Philip J. Bergmann; Krisztina Krizsán; Francis M. Martin; Igor V. Grigoriev; Dan Cullen; David S. Hibbett

    2016-01-01

    Fungal decomposition of plant cell walls (PCW) is a complex process that has diverse industrial applications and huge impacts on the carbon cycle. White rot (WR) is a powerful mode of PCW decay in which lignin and carbohydrates are both degraded. Mechanistic studies of decay coupled with comparative genomic analyses have provided clues to the enzymatic components of WR...

  10. ROMI 3.1 Least-cost lumber grade mix solver using open source statistical software

    Treesearch

    Rebecca A. Buck; Urs Buehlmann; R. Edward Thomas

    2010-01-01

    The least-cost lumber grade mix solution has been a topic of interest to both industry and academia for many years due to its potential to help wood processing operations reduce costs. A least-cost lumber grade mix solver is a rough mill decision support system that describes the lumber grade or grade mix needed to minimize raw material or total production cost (raw...

  11. Use of New Wood Material for Pallets, Containers is Stagnant to Declining

    Treesearch

    Robert J. Bush; Philip A. Araman

    1997-01-01

    In 1994, the authors reported in the Pallet Enterprise on their study of new and recovered wood use for pallets and containers. In this article they report on the results of a new survey in 1996 of new wood use by the pallet and container industry, comparing the latest results to previous studies. Their research is based on a study of 2,600 wooden pallet and container...

  12. Cradle-To-Gate Life Cycle Assessment of North American Hardboard and Engineered Wood Siding and Trim Production

    Treesearch

    Maureen Puettmann; Richard Bergman; Elaine Oneil

    2016-01-01

    CORRIM, the Consortium for Research on Renewable Industrial Materials (www.corrim.org), has derived life-cycle inventory (LCI) data for nine major wood products and four wood production regions in the United States (US). The LCI data cover forest regeneration through to final product at the mill gate. CORRIM’s LCI studies have included both structural and nonstructural...

  13. Sources of competitiveness for secondary wood products firms: a review of literature and research issues

    Treesearch

    Kristen Hoff; Nona Fisher; Sandra Miller; Alan Webb

    1997-01-01

    More than 1 million U.S. workers in some 45,000 firms are employed in the lumber, wood products, furniture, and fixture industries. Wood household and office furniture (SIC 251 and 252) are the largest manufacturing segments, adding $13.851 billion per year to raw product value. During the 1980s, U.S. furniture manufacturers lost sizeable market share to Pacific Rim...

  14. Effect of dieldrin in the glue line of oak plywood panels in preventing Lyctus beetle damage

    Treesearch

    Thomas McIntyre

    1961-01-01

    For many years the lumber industry has been seeking improved methods of preventing decay and insect damage to lumber and other wood products. One relatively new approach to this problem is the addition of toxic chemicals in plywood glues to prevent infestations or restrict feeding injury by wood-boring insects. Wood products treated in this manner have been marketed in...

  15. Primary forest products industry and timber use, Indiana, 1980.

    Treesearch

    James E. Blyth; Donald H. McGuire; W. Brad Smith

    1982-01-01

    Discusses recent Indiana forest industry trends; timber removals for industrial roundwood in 1980; and production and receipts of saw logs, pulpwood, veneer logs, and other industrial roundwood products. Reports on associated primary mill wood and bark residue and the disposition of mill residue.

  16. Bio-based wood adhesives--preparation, characterization, and testing

    USDA-ARS?s Scientific Manuscript database

    Adhesive bonding plays an increasing role in the forest product industry and is a key factor for efficiently utilizing timber and other lignocellulosic resources. As synthetic wood adhesives are mostly derived from depleting petrochemical resources and have resulted in increasing environmental conce...

  17. POLLUTION PREVENTION CASE STUDIES: LOW-VOC/HAP WOOD FURNITURE COATINGS

    EPA Science Inventory

    This article provides a brief profile of the wood furniture industry, discusses pollution prevention activities typically implemented, describes the four low-VOC/HAP coating technologies studied. and summarizes one case study for each of the low-VOC/HAP coating yechnologies inves...

  18. Eco-efficiency Analysis of Furniture Product Using Life Cycle Assessment

    NASA Astrophysics Data System (ADS)

    Rinawati, Dyah Ika; Sriyanto; Sari, Diana Puspita; Prayodha, Andana Cantya

    2018-02-01

    Furniture is one of Indonesia's main commodities strategically role in economic growth and employment in Indonesia. In their production process there many wastes resulted, such as such as sawdust, cuttings - pieces of wood, components that do not conform to specifications and the edges of wood from a log. Contrast with requirement of timber for furniture industries, availability of raw material sources decrease because of limited forest areas. Beside that, using electricity and chemical material in furniture production process have impact to environment. This study aim to assess the eco-cost and eco-efficiency ratio of the product so strategic recommendations to improve the eco-efficiency of products can be designed. The results of data processing showed the environmental costs of the furniture production process amount Rp 30.887.84. Eco-efficiency index of furniture products studied was 4,79 with the eco-efficiency ratio of 79,12%. This result means that the measured furniture products already profitable and sustainable, as well as its production process is already fairly efficient. However, improved performance of the production process can still be done to improve the eco-efficiency by minimizing the use of raw materials.

  19. Lignin-Retaining Transparent Wood.

    PubMed

    Li, Yuanyuan; Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin; Berglund, Lars

    2017-09-11

    Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light-transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high-lignin-content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK -1 , and work-tofracture of 1.2 MJ m -3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy-saving buildings. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  20. Lignin‐Retaining Transparent Wood

    PubMed Central

    Fu, Qiliang; Rojas, Ramiro; Yan, Min; Lawoko, Martin

    2017-01-01

    Abstract Optically transparent wood, combining optical and mechanical performance, is an emerging new material for light‐transmitting structures in buildings with the aim of reducing energy consumption. One of the main obstacles for transparent wood fabrication is delignification, where around 30 wt % of wood tissue is removed to reduce light absorption and refractive index mismatch. This step is time consuming and not environmentally benign. Moreover, lignin removal weakens the wood structure, limiting the fabrication of large structures. A green and industrially feasible method has now been developed to prepare transparent wood. Up to 80 wt % of lignin is preserved, leading to a stronger wood template compared to the delignified alternative. After polymer infiltration, a high‐lignin‐content transparent wood with transmittance of 83 %, haze of 75 %, thermal conductivity of 0.23 W mK−1, and work‐tofracture of 1.2 MJ m−3 (a magnitude higher than glass) was obtained. This transparent wood preparation method is efficient and applicable to various wood species. The transparent wood obtained shows potential for application in energy‐saving buildings. PMID:28719095

  1. Soda-Anthraquinone Durian (Durio Zibethinus Murr.) Rind Linerboard and Corrugated Medium Paper: A Preliminary Test

    NASA Astrophysics Data System (ADS)

    Rizal Masrol, Shaiful; Irwan Ibrahim, Mohd Halim; Adnan, Sharmiza; Mubarak Sa'adon, Amir; Ika Sukarno, Khairil; Fadrol Hisham Yusoff, Mohd

    2017-08-01

    A preliminary test was conducted to investigate the characteristics of linerboard and corrugated medium paper made from durian rind waste. Naturally dried durian rinds were pulped according to Soda-Anthraquinone (Soda-AQ) pulping process with a condition of 20% active alkali, 0.1% AQ, 7:1 liquor to material ratio, 120 minutes cooking time and 170°C cooking temperature. The linerboard and corrugated medium paper with a basis weight of 120 gsm were prepared and evaluated according to Malaysian International Organization for Standardization (MS ISO) and Technical Association of the Pulp and Paper Industry (TAPPI). The results indicate that the characteristics of durian rind linerboard are comparable with other wood or non-wood based paper and current commercial paper. However, low CMT value for corrugated medium and water absorptiveness quality for linerboard could be improved in future. Based on the bulk density (0.672 g/cm3), burst index (3.12 kPa.m2/g) and RCT (2.00 N.m2/g), the durian rind has shown a good potential and suitable as an alternative raw material source for linerboard industry.

  2. Primary forest products industry and timber use, Iowa, 1980.

    Treesearch

    James E. Blyth; John Tibben; W. Brad Smith

    1984-01-01

    Discusses recent Iowa forest industry trends, timber removals for industrial roundwood in 1980, production and receipts of saw logs in 1980, and production of other industrial roundwood products in 1980. Reports on wood and bark residue generated at primary mills and the disposition of this residue.

  3. Occupational exposure to wood dust and health effects on the respiratory system in a minor industrial estate in Bursa, Turkey.

    PubMed

    Osman, Erdinç; Pala, Kayihan

    2009-01-01

    The aim of this study was to estimate occupational exposure to wood dust in the furniture industry in a minor industrial estate in Bursa, Turkey. The study was conducted between October 2006 and May 2007. In this study, a total of 656 persons, 328 woodworkers and 328 controls were included. A questionnaire was used in the study. Physical examination and the pulmonary function tests (MIR-Spirobank G) of the workers were performed. A portable Aircheck 2000 pump was used to collect the specimens of wood dust from the workplaces. NIOSH Method 0500 was employed for the gravimetric measurements of dust. The average dust concentration at the workplace was 2.04+/-1.53 mg/m3. It was reported that 176 of workers (53.7%) had blocked nose while working, 141 (43.0%) had redness of the eyes, 135 (41.2%) had itching eyes and 78 (23.8%) had runny nose. No symptoms were observed in the control group while they were working at the workplace. The mean FEV1 and FVC values of woodworkers, among both smokers and non smokers, were significantly low, although the FEV1/FVC value was high (p < 0.05). An increase both in FEV1 and FVC values was detected among the woodworkers who had a working period less than 10 years and were exposed to wood dust at concentrations over 4 mg/m3 compared to the woodworkers who were exposed to wood dust at less than 4 mg/m3 (p < 0.05). As a result, in this study it was pointed out that the exposure to wood dust adversely influenced the workers respiratory functions. Besides, in this study a question associated with the healthy worker effect that can adversely influence health of workers exposed to wood dust at less than (4 mg/m3) is revealed.

  4. DOE Office of Scientific and Technical Information (OSTI.GOV)

    SLACK, JEFFREY, M.

    Wood is a potential source for biofuels such as ethanol if it can be digested into sugars and fermented by yeast. Biomass derived from wood is a challenging substrate for ethanol production since it is made of lignin and cellulose which cannot be broken down easily into fermentable sugars. Some insects, and termites in particular, are specialized at using enzymes in their guts to digest wood into sugars. If termite gut enzymes could be made abundantly by a recombinant protein expression vector system, they could be applied to an industrial process to make biofuels from wood. In this study, amore » large cDNA library of relevant termite genes was made using termites fed a normal diet, or a diet with added lignin. A subtracted library yielded genes that were overexpressed in the presence of lignin. Termite gut enzyme genes were identified and cloned into recombinant insect viruses called baculoviruses. Using our PERLXpress system for protein expression, these termite gene recombinant baculoviruses were prepared and used to infect insect larvae, which then expressed abundant recombinant termite enzymes. Many of these expressed enzymes were prepared to very high purity, and the activities were studied in conjunction with collaborators at Purdue University. Recombinant termite enzymes expressed in caterpillars were shown to be able to release sugars from wood. Mixing different combinations of these enzymes increased the amount of sugars released from a model woody biomass substrate. The most economical, fastest and energy conserving way to prepare termite enzymes expressed by recombinant baculoviruses in caterpillars was by making crude liquid homogenates. Making enzymes stable in homogenates therefore was a priority. During the course of these studies, improvements were made to the recombinant baculovirus expression platform so that caterpillar-derived homogenates containing expressed termite enzymes would be more stable. These improvements in the baculoviruses included significantly reducing proteases and preventing blackening immune reactions that occur when caterpillars are homogenized. Proteases may degrade enzymes and immune reaction blackening may inactivate enzymes thus compromising the ability of these crude recombinant expressed termite enzyme preparations to release sugars. Commercial preparations of fungal enzymes currently are used to digest wood for ethanol production. We demonstrated in this study that termite enzymes could improve the efficiency of fungal enzyme cocktails. Although the economic feasibility of using caterpillar expressed termite enzymes alone to treat wood was not proven, this work points to the potential to combine C-PERLXpressed insect enzymes with industrial enzyme cocktails to boost their efficiency at treating wood for biofuels.« less

  5. Nasopharyngeal carcinoma in Malaysian Chinese: occupational exposures to particles, formaldehyde and heat.

    PubMed

    Armstrong, R W; Imrey, P B; Lye, M S; Armstrong, M J; Yu, M C; Sani, S

    2000-12-01

    During 1990-1992, 282 Chinese residents of Selangor and the Federal Territory, Malaysia with histologically confirmed nasopharyngeal carcinoma (NPC) were interviewed about occupational history, diet, alcohol consumption, and tobacco use, as were an equal number of Malaysian Chinese population controls, pair-matched to cases by age and sex. Exposures to 20 kinds of workplace substances, solar and industrial heat, and cigarette smoke, were analysed by univariate and multivariate methods. Nasopharyngeal carcinoma was associated with occupational exposures to construction, metal and wood dusts; motor fuel and oil; paints and varnishes; certain other chemicals; industrial heat; solar heat from outdoor occupations; certain smokes; cigarette smoking; and childhood exposure to parental smoking. After adjustment for risk from diet and cigarette smoke, only wood dust (OR = 2.36; 95% CI : 1.33- 4.19), and industrial heat (OR = 2.21; 95% CI : 1.12-4.33) remained clearly associated. Wood dust remained statistically significant after further adjustment for social class. No significant crude or adjusted association was found between NPC and formaldehyde (adjusted OR = 0.71; 95% CI : 0.34-1.43). This study supports previous findings that some occupational inhalants are risk factors for NPC. The statistical effect of wood dust remained substantial after adjustment for diet, cigarette smoke, and social class. Intense industrial heat emerged as a previously unreported risk factor, statistically significant even after adjustment for diet and cigarette smoke. No association was found between NPC and formaldehyde.

  6. The Effect of Stringer Repair Methods and Repair Frequency on the Performance of GMA-Style 48x40-Inch Wood Pallets

    Treesearch

    John W. Clarke; Marshall S. White; Philip A. Araman

    2004-01-01

    Over 135 million wood pallets were repaired for reuse in 1995. One of the most commonly damaged components in a wood pallet is the notched stringer. Metal plates, half companion stringers, and full companion stringers are repair methods described in the U.S. industry standard published by the American Society of Mechanical Engineers. This study evaluated the effect of...

  7. New York Timber industries - a periodic assessment of timber output

    Treesearch

    Robert L., Jr. Nevel; Everett L Sochia; Thomas H. Wahl; Thomas H. Wahl

    1982-01-01

    Reports the results of a survey of the timber industries of New York; contains statistics on industrial timber production and receipts, and production and disposition of the manufacturing residues. Comparisons are made with the most recent survey, and trends in industrial wood output are noted. Includes 18 statistical tables.

  8. Harvesting wood for energy.

    Treesearch

    Rodger A. Arola; Edwin W. Miyata

    1981-01-01

    Illustrates the potential of harvesting wood for industrial energy, based on the results of five harvesting studies. Presents information on harvesting operations, equipment costs, and productivity. Discusses mechanized thinning of hardwoods, clearcutting of low-value stands and recovery of hardwood tops and limbs. Also includes basic information on the physical and...

  9. Evaluating the Environmental Performance of Wood-Based Biofuels

    Treesearch

    Bruce Lippke; Richard Bergman; Adam Taylor; Maureen E. Puettmann

    2012-01-01

    The nonprofit Consortium for Research on Renewable Industrial Materials (CORRIM) has been developing comprehensive environmental performance information on wood building materials consistent with life-cycle standards (http://www.corrim.org/). The articles published in this Special Issue of the Forest Products Journal extend the research by the...

  10. History of wood machining

    Treesearch

    Peter Koch

    1967-01-01

    The history of wood machining is closely tied to advanced in metallurgy and power sources. It has been strongly and continuously shaped by prevailing economic forces and the rise and decline of other contemporary industries. This paper sketches a few of the highlights, with emphasis on developments in North America.

  11. Interest of new communicating material paradigm: An attempt in wood industry

    NASA Astrophysics Data System (ADS)

    Jover, J.; Thomas, A.; Leban, J. M.; Canet, D.

    2013-03-01

    This paper present a new paradigm in which the wood material could become communicating. We decide to use Nuclear Quadrupole Resonance to mass marking the wood. We imagine a new method to create identification codes. At first, we examine the feasibility of this mass marking method by impregnating wood to obtain a specific marking signal. In parallel, we study the interest to abide information provided by this marker to control the supply chain. We model the supply chain (e.g. the information/decisional flow) to understand which information is important and how to use it.

  12. Chemical composition and sensory properties of non-wooded and wooded Shiraz (Vitis vinifera L.) wine as affected by vineyard row orientation and grape ripeness level.

    PubMed

    Hunter, Jacobus J; Volschenk, Cornelis G

    2018-05-01

    The study aimed to unravel vineyard row orientation (NS, EW, NE-SW, NW-SE) and grape ripeness level (23, 25, 27 °Balling) implications for grape and wine composition and sensory properties/style (non-wooded/wooded wines) of Vitis vinifera L. cv. Shiraz (rootstock 101-14 Mgt). Soluble solid/titratable acidity ratios were lowest for EW, whereas warmer canopy sides (NW, N, NE) advanced grape ripening. Skin anthocyanins and phenolics generally decreased with ripening. NW-SE rows and S, SE, E and NE canopy sides showed highest skin total anthocyanins and phenolics. Wine total anthocyanins and phenolics increased with grape ripening; EW had lower values. Wine phenolic contents differed between canopy sides; N, NE, E and SE tended higher. Wine sensory profiles increased with grape ripening. For non-wooded wines, NW-SE and NE-SW row orientations generally resulted in highest scores, followed by NS. For EW rows, the N side presented better wines. Wood addition enhanced specific sensory descriptor perceptions. A large collection of wine styles surfaced in the same vineyard and terroir, increasing options to contribute positively to sustainable products. The study generated globally applicable, novel information vital for unlocking and valorising terroir/site potential for grape and wine chemical composition and wine sensory/style properties. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  13. Tennessee forest industries, 1979

    Treesearch

    Victor A. Rudis

    1979-01-01

    Tennessee supplied 178 million cubic feet of round-wood to forest industries in 1979, with hardwoods comprising four-fifths of the total. Saw logs and pulpwood accounted for 96 percent of the roundwood harvested.

  14. Composted Poultry Litter as an Amendment for Substrates with High Wood Content

    USDA-ARS?s Scientific Manuscript database

    Whole Tree (WT) and Clean Chip Residual (CCR) are potential new nursery substrates that are by-products of the forestry industry containing high wood content. Initial immobilization of nitrogen is one limitation of these new substrates, however the addition of composted poultry litter (CPL) to subs...

  15. Engineered and Other Wood Products - An Opportunity to "Grow the Pie"

    Treesearch

    Albert Schuler; Craig Adair

    2003-01-01

    The market for engineered wood products (EWP) is being driven by a number of factors including: technology; reduced availability of old-growth timber; construction activity, and globalization. Specifically, technological developments have allowed the industry to "engineer" or "design" improved performance properties and to utilize former "weed...

  16. 40 CFR 60.2245 - What is an air curtain incinerator?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Industrial Solid Waste Incineration Units for Which Construction Is Commenced After November 30, 1999 or for... and controlled air technology such as mass burn, modular, and fluidized bed combustors.) (b) Air....2260). (1) 100 percent wood waste. (2) 100 percent clean lumber. (3) 100 percent mixture of only wood...

  17. Mathematical Modelling at Secondary School: The MACSI-Clongowes Wood College Experience

    ERIC Educational Resources Information Center

    Charpin, J. P. F.; O'Hara, S.; Mackey, D.

    2013-01-01

    In Ireland, to encourage the study of STEM (science, technology, engineering and mathematics) subjects and particularly mathematics, the Mathematics Applications Consortium for Science and Industry (MACSI) and Clongowes Wood College (County Kildare, Ireland) organized a mathematical modelling workshop for senior cycle secondary school students.…

  18. 40 CFR 429.80 - Applicability; description of the wood preserving-steam subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Applicability; description of the wood... Wood Preserving Steam Subcategory § 429.80 Applicability; description of the wood preserving—steam... process wastewater pollutants into publicly owned treatment works from wood preserving processes that use...

  19. 40 CFR 429.80 - Applicability; description of the wood preserving-steam subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Applicability; description of the wood... Wood Preserving Steam Subcategory § 429.80 Applicability; description of the wood preserving—steam... process wastewater pollutants into publicly owned treatment works from wood preserving processes that use...

  20. 40 CFR 429.80 - Applicability; description of the wood preserving-steam subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Applicability; description of the wood... Wood Preserving Steam Subcategory § 429.80 Applicability; description of the wood preserving—steam... process wastewater pollutants into publicly owned treatment works from wood preserving processes that use...

  1. [Preface for special issue on bio-based materials (2016)].

    PubMed

    Weng, Yunxuan

    2016-06-25

    Bio-based materials are new materials or chemicals with renewable biomass as raw materials such as grain, legume, straw, bamboo and wood powder. This class of materials includes bio-based polymer, biobased fiber, glycotechnology products, biobased rubber and plastics produced by biomass thermoplastic processing and basic biobased chemicals, for instance, bio-alcohols, organic acids, alkanes, and alkenes, obtained by bio-synthesis, bio-processing and bio-refinery. Owing to its environmental friendly and resource conservation, bio-based materials are becoming a new dominant industry taking the lead in the world scientific and technological innovation and economic development. An overview of bio-based materials development is reported in this special issue, and the industrial status and research progress of the following aspects, including biobased fiber, polyhydroxyalkanoates, biodegradable mulching film, bio-based polyamide, protein based biomedical materials, bio-based polyurethane, and modification and processing of poly(lactic acid), are introduced.

  2. Laser-Induced Graphene Formation on Wood.

    PubMed

    Ye, Ruquan; Chyan, Yieu; Zhang, Jibo; Li, Yilun; Han, Xiao; Kittrell, Carter; Tour, James M

    2017-10-01

    Wood as a renewable naturally occurring resource has been the focus of much research and commercial interests in applications ranging from building construction to chemicals production. Here, a facile approach is reported to transform wood into hierarchical porous graphene using CO 2 laser scribing. Studies reveal that the crosslinked lignocellulose structure inherent in wood with higher lignin content is more favorable for the generation of high-quality graphene than wood with lower lignin content. Because of its high electrical conductivity (≈10 Ω per square), graphene patterned on wood surfaces can be readily fabricated into various high-performance devices, such as hydrogen evolution and oxygen evolution electrodes for overall water splitting with high reaction rates at low overpotentials, and supercapacitors for energy storage with high capacitance. The versatility of this technique in formation of multifunctional wood hybrids can inspire both research and industrial interest in the development of wood-derived graphene materials and their nanodevices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. The role of coal in industrialization: A case study of Nigeria

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Akarakiri, J.B.

    1989-01-01

    Coal is a mineral matter found in layers or beds in sedimentary rocks. It is a very highly variable substance. In addition to the variations from lignite to bituminous and anthracite, there are vast differences in its heating value, amount of volatiles, sulfur, moisture and so on. The chemical and physical properties of coal make it an important industrial raw material. There is proven 639 million tonnes of coal reserves in Nigeria. This paper examines the potential and current role of coal in the industrialization of Nigeria. Industries are now dependent on fuel oil as a source of fuel becausemore » of its economic and technological advantages over coal. Coal is a source of industrial energy for the future after the known oil reserves might have been exhausted. In the short term, coal can be used as a material for chemicals, iron and steel production as well as a substitute for wood energy in the process of industrialization.« less

  4. Changing Face of Wood Science in Modern Era: Contribution of Nanotechnology.

    PubMed

    Mishra, Pawan Kumar; Giagli, Kyriaki; Tsalagkas, Dimitrios; Mishra, Harshita; Talegaonkar, Sushma; Gryc, Vladimír; Wimmer, Rupert

    2018-02-14

    Wood science and nanomaterials science interact together in two different aspects; a) fabrication of lignocellulosic nanomaterials derived from wood and plant-based sources and b) surface or bulk wood modification by nanoparticles. In this review, we attempt to visualize the impact of nanoparticles on the wood coating and preservation treatments based on a thorough registration of the patent databases. The study was carried out as an overview of the scientifically most followed trends on nanoparticles utilization in wood science and wood protection depicted by recent universal filed patents. This review is exclusively targeted on the solid (timber) wood as a subject material. Utilization of mainly metal nanoparticles as photoprotection, antibacterial, antifungal, antiabrasive and functional component on wood modification treatments was found to be widely patented. Additionally, an apparent minimization in the emission of volatile organic compounds (VOCs) has been succeeded. Bulk wood preservation and more importantly, wood coating, splay the range of strengthening wood dimensional stability and biological degradation, against moisture absorption and fungi respectively. Nanoparticle materials have addressed various issues of wood science in a more efficient and environmental way than the traditional methods. Nevertheless, abundant tests and regulations are still needed before industrializing or recycling these products. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  5. Movement and fate of creosote waste in ground water, Pensacola, Florida; U.S. Geological Survey toxic waste-ground-water contamination program

    USGS Publications Warehouse

    Mattraw, Harold C.; Franks, Bernard J.

    1986-01-01

    Ground- and surface-water contamination by pesticides used in the wood-preserving industry is widespread in the United States. Pine poles were treated with wood preservatives from 1902 to 1981 at a creosote works near Pensacola, Florida. Diesel fuel, creosote, and pentachlorophenol were discharged to two unlined impoundments that had a direct hydraulic connection to the sand-and-gravel aquifer. Evidence of wood-preserving waste contamination appears to be confined to the upper 30 meters of the aquifer. The waste plume extends downgradient approximately 300 meters south toward Pensacola Bay. In 1983, the creosote works site was selected by the U.S. Geological Survey's Office of Hazardous Waste Hydrology as a national research demonstration area to apply the latest techniques for characterizing hazardous waste problems. The multidisciplinary research effort is aimed at studying processes that affect the occurrence, transport, transformations, and fate of the toxic contaminants associated with wood preservatives in the environment. Clusters of two to five wells were constructed at different depths at nine sites to define the depth of contamination. Research studies are investigating sorption, dispersion, dilution, chemical reactions, bacterially mediated transformations, quality assurance, plume hydrodynamics, and the ultimate fate of these complex organic wastes.

  6. The Effect of Wood Aerosols and Bioaerosols on the Respiratory Systems of Wood Manufacturing Industry Workers in Golestan Province

    PubMed Central

    Badirdast, Phateme; Salehpour, Soussan; Ghadjari, Ali; Khodakarim, Soheila; Panahi, Davod; Fadaei, Moslem; Rahimi, Abolfazl

    2017-01-01

    Background: Occupational exposure to dust leads to acute and chronic respiratory diseases, occupational asthma, and depressed lung function. In the light of a lack of comprehensive studies on the exposure of Iranian workers to wood dusts, the objective of this study was to monitor the occupational exposure to wood dust and bioaerosol, and their correlation with the lung function parameters in chipboard manufacturing industry workers. Materials and Methods: A cross-sectional study was conducted on chipboard workers in Golestan Province; a total of 150 men (100 exposed cases and 50 controls) were assessed. Workers were monitored for inhalable wood dust and lung function parameters, i.e., FVC, FEV1, FEV1/FVC, and FEF25–75%. The workers’ exposure to bioaerosols was measured using a bacterial sampler; a total of 68 area samples were collected. The analysis was performed using the Mann-Whitney, Kruskal-Wallis, and regression statistical tests. Results: The geometric mean value and geometric standard deviation of inhalable wood dust for the exposed and control groups were 19 ± 2.00 mg/m3 and 0.008 ± 0.001 mg/m3, respectively. A statistically significant correlation was observed between the lung parameters and cumulative exposure to inhalable wood dust, whereas a statistically significant correlation was not observed between the lung parameters and bioaerosol exposure. However, the exposure of Iranian workers to bioaerosols was higher, compared to their foreign coworkers. Conclusion: Considering the high level of exposure among workers in this study along with their lung function results, long-term exposure to wood dust may be detrimental to the workers’ health and steps to limit their exposure should be considered seriously. PMID:28638425

  7. Treated wood preservatives linked to aquatic damage, human illness, and death--a societal problem.

    PubMed

    Edlich, Richard F; Winters, Kathryne L; Long, William B

    2005-01-01

    On February 12, 2002, the US Environmental Protection Agency (EPA) announced a voluntary decision by industry to move consumer use of treated lumber products away from a variety of pressure-treated wood that contains arsenate (As) by December 31, 2003, in favor of new alternative wood preservatives. Chromated copper arsenate (CCA) is a chemical mixture consisting of three pesticidal compounds (As, chromium, and copper) registered for wood preservative uses. CCA is injected into wood by a process that uses high pressure to saturate wood products with the chemical. Only people who have received the proper safety training should use CCA to treat wood products. Around the home, CCA-treated wood is commonly used for decks, walkways, fences, gazebos, boat docks, and playground equipment. Other common uses of CCA-treated wood include highway noise barriers, sign posts, utility posts, and retaining walls. As of January 1, 2004, the EPA is no longer allowing CCA products to be used to treat wood intended for any of these residential uses. This decision will facilitate the voluntary transition to new alternative wood preservatives that do not contain As in both the manufacturing and retail sectors. To its credit, the EPA has developed consumer safety information sheets, hanging signs, end signs, and bin stickers that provide comprehensive information about the dangers of CCA-treated wood, use-site, and handling precautions. The EPA has not concluded that CCA-treated wood poses any unreasonable risk to the public or the environment. Nevertheless, As is a known human carcinogen and, thus, the EPA believes that any reduction in the levels of potential exposure to As is desirable. The toxicologic manifestations have been primarily related to the effects of As exposure from drinking water sources and include the following: acute poisoning incidents, cardiovascular effects, diabetes mellitus, and cancer. Understanding the biomethylation of As is central to elucidating its action as a toxin and a carcinogen. In humans as in many other species, inorganic As is enzymatically converted to the methylated products methyl As (MAs) and dimethyl As (DMAs). The aforementioned voluntary agreement to reduce the uses of CCA-treated wood does not include a ban on the use of CCA for residential roofing. A major reason that this wood product should be banned from residential roofing is that it does not provide a Class "A" fire-rated roof system, which markedly reduce the frequency of residential roof fires.

  8. Primary forest products industry and timber use, Wisconsin, 1973.

    Treesearch

    James E. Blyth; Eugene F. Landt; James W. Whipple; Jerold T. Hahn

    1976-01-01

    Discusses recent Wisconsin forest industry trends; timber removals for industrial roundwood in 1973; production and receipts in 1973 of pulpwood, saw logs, veneer logs, and other industrial roundwood products. Shows trends in pulpwood and veneer log production and compares saw log production in 1967 and 1973. Discusses primary wood-using plant residue and its...

  9. Idaho's Forest Products Industry: A Descriptive Analysis

    Treesearch

    Todd A. Morgan; Charles E. Keegan; Timothy P. Spoelma; Thale Dillon; A. Lorin Hearst; Francis G. Wagner; Larry T. DeBlander

    2004-01-01

    This report provides a description of the structure, capacity, and condition of Idaho's primary forest products industry; traces the flow of Idaho's 2001 timber harvest through the primary sectors; and quantifies volumes and uses of wood fiber. The economic contribution of the forest products industry to the State and historical industry changes are discussed...

  10. Primary forest products industry and timber use, Minnesota, 1973.

    Treesearch

    James E. Blyth; Steven Wilhelm; Jerold T. Hahn

    1979-01-01

    Discusses recent Minnesota forest industry trends; timber removals for industrial roundwood in 1973; production and receipts in 1973 of pulpwood, saw logs, and other industrial roundwood products. Shows trends in pulpwood and veneer log production and compares saw log production in 1960 and 1973. Discusses primary wood-using mill residue and its disposition.

  11. The timber industry of Iowa: an assessment of timber product output and use, 1988.

    Treesearch

    W. Brad Smith; John Tibben

    1990-01-01

    Discusses recent Iowa forest industry trends, timber removals for industrial roundwood in 1980, production and receipts of saw logs in 1988, and production of other industrial roundwood products in 1988. Reports on wood and bark residue generated at primary mills and the disposition of this residue.

  12. Formaldehyde exposure in U.S. industries from OSHA air sampling data.

    PubMed

    Lavoue, Jerome; Vincent, Raymond; Gerin, Michel

    2008-09-01

    National occupational exposure databanks have been cited as sources of exposure data for exposure surveillance and exposure assessment for occupational epidemiology. Formaldehyde exposure data recorded in the U.S Integrated Management Information System (IMIS) between 1979 and 2001 were collected to elaborate a multi-industry retrospective picture of formaldehyde exposures and to identify exposure determinants. Due to the database design, only detected personal measurement results (n = 5228) were analyzed with linear mixed-effect models, which explained 29% of the total variance. Short-term measurement results were higher than time-weighted average (TWA) data and decreased 18% per year until 1987 (TWA data 5% per year) and 5% per year (TWA data 4% per year) after that. Exposure varied across industries with maximal estimated TWA geometric means (GM) for 2001 in the reconstituted wood products, structural wood members, and wood dimension and flooring industries (GM = 0.20 mg/m(3). Highest short-term GMs estimated for 2001 were in the funeral service and crematory and reconstituted wood products industries (GM = 0.35 mg/m(3). Exposure levels in IMIS were marginally higher during nonprogrammed inspections compared with programmed inspections. An increasing exterior temperature tended to cause a decrease in exposure levels for cold temperatures (-5% per 5 degrees C for T < 15 degrees C) but caused an increase in exposure levels for warm temperatures (+15% per 5 degrees C for T >15 degrees C). Concentrations measured during the same inspection were correlated and varied differently across industries and sample type (TWA, short term). Sensitivity analyses using TOBIT regression suggested that the average bias caused by excluding non-detects is approximately 30%, being potentially higher for short-term data if many non-detects were actually short-term measurements. Although limited by availability of relevant exposure determinants and potential selection biases in IMIS, these results provide useful insight on formaldehyde occupational exposure in the United States in the last two decades. The authors recommend that more information on exposure determinants be recorded in IMIS.

  13. Emission inventory of primary air pollutants in 2010 from industrial processes in Turkey.

    PubMed

    Alyuz, Ummugulsum; Alp, Kadir

    2014-08-01

    The broad objective of this study was to develop CO2, PM, SOx, CO, NOx, VOC, NH3 and N2O emission inventory of organic and inorganic chemicals, mineral products, metallurgical, petroleum refining, wood products, food industries of Turkey for 2010 for both co]ntrolled and uncontrolled conditions. In this study, industries were investigated in 7 main categories and 53 sub-sectors and a representative number of pollutants per sub-sector were considered. Each industry was evaluated in terms of emitted emissions only from industrial processes, and fuel combustion activities were excluded (except cement industry). The study employed an approach designed in four stages; identification of key categories; activity data & emission factor search; emission factor analyzing; calculation of emissions. Emission factor analyzing required aggregate and firm analysis of sectors and sub-sectors and deeper insights into underlying specific production methods used in the industry to decide on the most representative emission factor. Industry specific abatement technologies were considered by using open-source documents and industry specific reports. Regarding results of this study, mineral industry and iron & steel industry were determined as important contributors of industrial emissions in Turkey in 2010. Respectively, organic chemicals, petroleum refining, and pulp & paper industries had serious contributions to Turkey's air pollutant emission inventory from industrial processes. The results showed that calculated CO2 emissions for year 2010 was 55,124,263 t, also other emissions were 48,853 t PM, 24,533 t SOx, 79,943 t NOx, 31,908 t VOC, 454 t NH3 and 2264 t N2O under controlled conditions. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Five New Wood Decay Fungi (Polyporales and Hymenochaetales) in Korea.

    PubMed

    Kim, Nam Kyu; Park, Jae Young; Park, Myung Soo; Lee, Hyun; Cho, Hae Jin; Eimes, John A; Kim, Changmu; Lim, Young Woon

    2016-09-01

    The wood decay fungi are a diverse taxonomic group that plays a pivotal role in forest carbon cycling. Wood decay fungi use various enzymatic pathways to digest dead or living wood in order to obtain carbon and other nutrients and these enzymatic systems have been exploited for both industrial and medical applications. Over 600 wood decay fungi species have been described in Korea; however, the recent application of molecular markers has dramatically altered the taxonomy of many of these wood decay fungi at both the genus and species levels. By combining molecular methods, specifically sequences of the internal transcribed spacer region, with traditional morphological characters, this study identified five new species records for Korea in five genera: Aurantiporus , Favolus , Neofavolus , Loweomyces , and Hymenochaetopsis . Three of these genera ( Aurantiporus , Favolus , and Loweomyces ) were previously unknown in Korea. The relatively simple morphology of the wood decay fungi often leads to ambiguous taxonomic assignment. Therefore, molecular markers are a necessary component of any taxonomic or evolutionary study of wood decay fungi. Our study highlights the need for a more robust and multifaceted approach in investigating new wood decay fungi in Korea.

  15. Timber supplies for industry in Arkansas

    Treesearch

    Herbert S. Sternitzke

    1956-01-01

    Arkansas' economy depends heavily upon the State's forest resource. In value added by manufacture, wood-using industries far outrank all others; they also furnish a livelihood for almost half of all employees engaged in manufacturing.

  16. Tennessee forest industries

    Treesearch

    Daniel F. Bertelson

    1971-01-01

    Tennessee forests supplied 137 million cubic feet of round-wood to forest industries in 1970. Hardwoods made up nearly four-fifths of the total. Pulpwood harvesting increased, but cutting of most other products decreased during the 1960's.

  17. Fuzzy logic applied to prospecting for areas for installation of wood panel industries.

    PubMed

    Dos Santos, Alexandre Rosa; Paterlini, Ewerthon Mattos; Fiedler, Nilton Cesar; Ribeiro, Carlos Antonio Alvares Soares; Lorenzon, Alexandre Simões; Domingues, Getulio Fonseca; Marcatti, Gustavo Eduardo; de Castro, Nero Lemos Martins; Teixeira, Thaisa Ribeiro; Dos Santos, Gleissy Mary Amaral Dino Alves; Juvanhol, Ronie Silva; Branco, Elvis Ricardo Figueira; Mota, Pedro Henrique Santos; da Silva, Lilianne Gomes; Pirovani, Daiani Bernardo; de Jesus, Waldir Cintra; Santos, Ana Carolina de Albuquerque; Leite, Helio Garcia; Iwakiri, Setsuo

    2017-05-15

    Prospecting for suitable areas for forestry operations, where the objective is a reduction in production and transportation costs, as well as the maximization of profits and available resources, constitutes an optimization problem. However, fuzzy logic is an alternative method for solving this problem. In the context of prospecting for suitable areas for the installation of wood panel industries, we propose applying fuzzy logic analysis for simulating the planting of different species and eucalyptus hybrids in Espírito Santo State, Brazil. The necessary methodological steps for this study are as follows: a) agriclimatological zoning of different species and eucalyptus hybrids; b) the selection of the vector variables; c) the application of the Euclidean distance to the vector variables; d) the application of fuzzy logic to matrix variables of the Euclidean distance; and e) the application of overlap fuzzy logic to locate areas for installation of wood panel industries. Among all the species and hybrids, Corymbia citriodora showed the highest percentage values for the combined very good and good classes, with 8.60%, followed by Eucalyptus grandis with 8.52%, Eucalyptus urophylla with 8.35% and Urograndis with 8.34%. The fuzzy logic analysis afforded flexibility in prospecting for suitable areas for the installation of wood panel industries in the Espírito Santo State can bring great economic and social benefits to the local population with the generation of jobs, income, tax revenues and GDP increase for the State and municipalities involved. The proposed methodology can be adapted to other areas and agricultural crops. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Large wood recruitment and redistribution in headwater streams in the southern Oregon Coast Range, U.S.A

    USGS Publications Warehouse

    May, Christine L.; Gresswell, Robert E.

    2003-01-01

    Large wood recruitment and redistribution mechanisms were investigated in a 3.9 km2 basin with an old-growth Pseudotsuga menziesii (Mirb.) Franco and Tsuga heterophylla (Raf.) Sarg. forest, located in the southern Coast Range of Oregon. Stream size and topographic setting strongly influenced processes that delivered wood to the channel network. In small colluvial channels draining steep hillslopes, processes associated with slope instability dominated large wood recruitment. In the larger alluvial channel, windthrow was the dominant recruitment process from the local riparian area. Consequently, colluvial channels received wood from further upslope than the alluvial channel. Input and redistribution processes influenced piece location relative to the direction of flow and thus, affected the functional role of wood. Wood recruited directly from local hillslopes and riparian areas was typically positioned adjacent to the channel or spanned its full width, and trapped sediment and wood in transport. In contrast, wood that had been fluvially redistributed was commonly located in mid-channel positions and was associated with scouring of the streambed and banks. Debris flows were a unique mechanism for creating large accumulations of wood in small streams that lacked the capacity for abundant fluvial transport of wood, and for transporting wood that was longer than the bank-full width of the channel.

  19. Co-composting of biowaste and wood ash, influence on a microbially driven-process.

    PubMed

    Fernández-Delgado Juárez, Marina; Prähauser, Barbara; Walter, Andreas; Insam, Heribert; Franke-Whittle, Ingrid H

    2015-12-01

    A trial at semi-industrial scale was conducted to evaluate the effect of wood ash amendment on communal biowaste in a composting process and on the final composts produced. For this purpose, three treatments including an unamended control (C0) and composts with additions of 6% (C6), and 12% (C12) of wood ash (w/w) were studied, and physico-chemical parameters as well as microbial activity and community composition were investigated. At the end of the process, composts were tested for toxicity and quality, and microbial physiological activity. The influence of ash addition on compost temperature, pH, microbial activity and composition was stronger during the early composting stages and diminished with time, whereby composts became more similar. Using the COMPOCHIP microarray, a reduction in the pathogenic genera Listeria and Clostridium was observed, which together with the temperature increases of the composting process helped in the hygienisation of composts. Lactobacillus species were also affected, such that reduced hybridisation signals were observed with increased ash addition, due to the increased pH values in amended composts. Organic matter mineralisation was also increased through ash addition, and no negative effects on the composting process were observed. The nutrient content of the final products was increased through the addition of ash, and no toxic effects were observed. Nonetheless, greater concentrations of heavy metals were found in composts amended with more ash, which resulted in a downgrading of the compost quality according to the Austrian Compost Ordinance. Thus, regulation of both input materials and end-product quality is essential in optimising composting processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Electron beams in research and technology

    NASA Astrophysics Data System (ADS)

    Mehnert, R.

    1995-11-01

    Fast electrons lose their energy by inelastic collisions with electrons of target molecules forming secondary electrons and excited molecules. Coulomb interaction of secondary electrons with valence electrons of neighboring molecules leads to the formation of radical cations, thermalized electrons, excited molecular states and radicals. The primary reactive species initiate chemical reactions in the materials irradiated. Polymer modifications using accelerated electrons such as cross-linking of cable insulation, tubes, pipes and moldings, vulcanization of elastomers, grafting of polymer surfaces, processing of foamed plastics and heat shrinkable materials have gained wide industrial acceptance. A steadily growing electron beam technology is curing of paints, lacquers, printing inks and functional coatings. Electron beam processing offers high productivity, the possibility to treat the materials at normal temperature and pressure, excellent process control and clean production conditions. On an industrial scale the most important application of fast electrons is curing of 100% reactive monomer/prepolymer systems. Mainly acrylates and epoxides are used to formulate functional coatings on substrates such as paper, foil, wood, fibre board and high pressure laminates. A survey is given about the reaction mechanism of curing, the characterization of cured coatings, and of some industrial application.

  1. Study of the Influence of Key Process Parameters on Furfural Production.

    PubMed

    Fele Žilnik, Ljudmila; Grilc, Viktor; Mirt, Ivan; Cerovečki, Željko

    2016-01-01

    The present work reports the influence of key process variables on the furfural formation from leached chestnut-wood chips in a pressurized reactor. Effect of temperature, pressure, type and concentration of the catalyst solution, the steam flow rate or stripping module, the moisture content of the wood particles and geometric characteristics such as size and type of the reactor, particle size and bed height were considered systematically. One stage process was only taken into consideration. Lab-scale and pilot-scale studies were performed. The results of the non-catalysed laboratory experiments were compared with an actual non-catalysed (auto-catalysed) industrial process and with experiments on the pilot scale, the latter with 28% higher furfural yield compared to the others. Application of sulphuric acid as catalyst, in an amount of 0.03-0.05 g (H2SO4 100%)/g d.m. (dry material), enables a higher production of furfural at lower temperature and pressure of steam in a shorter reaction time. Pilot scale catalysed experiments have revealed very good performance for furfural formation under less severe operating conditions, with a maximum furfural yield as much as 88% of the theoretical value.

  2. Design and Development of an Automatic Tool Changer for an Articulated Robot Arm

    NASA Astrophysics Data System (ADS)

    Ambrosio, H.; Karamanoglu, M.

    2014-07-01

    In the creative industries, the length of time between the ideation stage and the making of physical objects is decreasing due to the use of CAD/CAM systems and adicitive manufacturing. Natural anisotropic materials, such as solid wood can also be transformed using CAD/CAM systems, but only with subtractive processes such as machining with CNC routers. Whilst some 3 axis CNC routing machines are affordable to buy and widely available, more flexible 5 axis routing machines still present themselves as a too big investment for small companies. Small refurbished articulated robots can be a cheaper alternative but they require a light end-effector. This paper presents a new lightweight tool changer that converts a small 3kg payload 6 DOF robot into a robot apprentice able to machine wood and similar soft materials.

  3. Supplement B to compilation of air pollutant emission factors, volume 1. Stationary point and area sources

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    This document contains emission factors and process information for more than 200 air pollution source categories. This Supplement to AP-42 addresses pollutant-generating activity from Bituminous And Subbituminous Coal Combustion, Anthracite Coal Combustion, Fuel Oil Combustion, Natural Gas Combustion, Liquefied Petroleum Gas Combustion, Wood Waste Combustion In Boilers, Lignite Combustion, Bagasse Combustion In Sugar Mills, Residential Fireplaces, Residential Wood Stoves, Waste Oil Combustion, Stationary Gas Turbines For Electricity Generation, Heavy-duty Natural Gas-fired Pipeline Compressor Engines And Turbines, Gasoline and Diesel Industrial Engines, Large Stationary Diesel And All Stationary Dual-fuel Engines, Adipic Acid, Cotton Ginning, Alfafalfa Dehydrating, Malt Beverages, Ceramic Products Manufacturing,more » Electroplating, Wildfires And Prescribed Burning, Emissions From Soils-Greenhouse Gases, Termites-Greenhouse Gases, and Lightning Emissions-Greenhouse Gases.« less

  4. Wood-based composites and panel products

    Treesearch

    John A. Youngquist

    1999-01-01

    Because wood properties vary among species, between trees of the same species, and between pieces from the same tree, solid wood cannot match reconstituted wood in the range of properties that can be controlled in processing. When processing variables are properly selected, the end result can sometimes surpass nature’s best effort. With solid wood, changes in...

  5. Laminating and Bending; A Base Syllabus on Wood Technology.

    ERIC Educational Resources Information Center

    Eastern Kentucky Univ., Richmond.

    Prepared by participants in the 1968 National Defense Education Act Institute on Wood Technology, this syllabus is one of a series of basic outlines designed to aid college level industrial arts woodworking instructors in improving and broadening the scope and content of their programs. The manual consists of a brief introduction followed by seven…

  6. Outdoor durability of wood-polymer composites

    Treesearch

    N. M. Stark; D. J. Gardner

    2008-01-01

    Wood-plastic composite (WPC) lumber is promoted as a low-maintenance, high-durability product (Clemons, 2002). However, after a decade of exterior use in the construction industry, questions have arisen regarding durability. These questions are based on documented evidence of failures in the field of WPC decking products due to such impacts as polymer degradation (...

  7. Determinant Product and Supplier Attributes in Domestic Markets for Hardwood Lumber

    Treesearch

    Robert J. Bush; Steven A. Sinclair; Philip A. Araman

    1991-01-01

    Product and supplier attributes that are critical in hardwood lumber purchase decisions (i.e., determinant) were investigated in four segments of the domestic market for hardwood lumber: millwork producers (Standard Industrial Classification (SIC) 2431), hardwood dimension and flooring producers (SIC 2426), wood household furniture producers (SIC 2511), and wood...

  8. Environmental impact of producing hardwood lumber using life-cycle inventory

    Treesearch

    Richard D. Bergman; S.A. Bowe

    2007-01-01

    Using sustainable building materials is gaining a significant presence in the United States therefore proving sustainability claims are becoming increasingly more important. Showing wood products as green building materials is vital for the long-term productivity of the wood building industry. This study examined hardwood lumber manufacturing using Life-Cycle Inventory...

  9. Some thoughts on wood utilization research

    Treesearch

    P. Koch

    1980-01-01

    For over 17 years our small group of scientists has worked to improve utilization of southern wood species. From these years of experience, I have distilled some thoughts on research objectives, attributes of scientists who accomplish the objectives, administration of research, and transferring results from laboratory to industry. I would like to share these thoughts...

  10. 40 CFR 60.2810 - What is an air curtain incinerator?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Commercial and Industrial Solid Waste Incineration Units that Commenced Construction On or Before November 30... “Air Curtain Incinerators” (§§ 60.2810 through 60.2870). (1) 100 percent wood waste. (2) 100 percent clean lumber. (3) 100 percent mixture of only wood waste, clean lumber, and/or yard waste. ...

  11. Wood use by Ohio's Amish furniture cluster

    Treesearch

    Matthew Bumgardner; Robert Romig; William Luppold

    2007-01-01

    Much has been reported regarding the decline of the U.S. wood furniture manufacturing industry. One segment that seems to be maintaining its competitiveness is the Amish-made furniture sector. The Amish traditionally have undertaken agriculture-related occupations (Stinner et al. 1989); however, as farmland has become increasingly scarce and expensive, and as the Amish...

  12. Carbohydrate modified phenol-formaldehyde resins

    Treesearch

    Anthony H. Conner; Linda F. Lorenz

    1986-01-01

    For adhesive self-sufficiency, the wood industry needs new adhesive systems in which all or part of the petroleum-derived phenolic component is replaced by a renewable material without sacrificing high durability or ease of bonding. We tested the bonding of wood veneers, using phenolic resins in which part of the phenol-formaldehyde was replaced with carbohydrates. Our...

  13. Publications - SR 46 | Alaska Division of Geological & Geophysical Surveys

    Science.gov Websites

    , R.C., Wood, J.E., and Clough, A.H. Publication Date: 1991 Publisher: Alaska Division of Geological , R.C., Wood, J.E., and Clough, A.H., 1991, Alaska's mineral industry 1991: Alaska Division of ; Beryllium; Bismuth; Ceramics; Chromium; Coal; Cobalt; Construction Materials; Copper; Cultural Resources

  14. Adhesive strength of pilot-scale washed cottonseed meal in comparison with a synthetic adhesive for non-structural application

    USDA-ARS?s Scientific Manuscript database

    Great progress has been made on developing bio-based wood adhesives from renewable natural resources over last couple of decades . Water-washed cottonseed meal (WCSM) showed the adhesive performance comparable to cottonseed protein isolate. To promote WCSM as an industrial wood adhesive for non-stru...

  15. Advancing sustainable forestry by using engineered wood or bio-composites

    Treesearch

    Jerrold E. Winandy

    2005-01-01

    As worldwide demand for timber and bio-fiber resources grows, sustainable resource management and industrial utilization must collaborate to develop a shared vision for both long-term sustainable management of forest and bio-resources and sustainable economic development. Engineered wood- and bio-composites offer a tool that can both achieve resource sustainability and...

  16. Adhesives; A Base Syllabus on Wood Technology.

    ERIC Educational Resources Information Center

    Eastern Kentucky Univ., Richmond.

    Prepared by participants in the 1968 National Defense Education Act Institute on Wood Technology, this syllabus is one of a series of basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and content of their programs. The guide is divided into three sections, the first of which deals with…

  17. Industry standards for recognition of marginal wood defects

    Treesearch

    Henry A. Huber; Steve Ruddell; Charles W. McMillin

    1990-01-01

    This study of 46 U.S. wood products companies that manufacture a variety of hardwood products found no consistently applied formal or standard definition of what constitutes a marginal defect. Analysis indicated homogeneous yet nonspecific rules are used. While there were wide variations in criteria, similar quantitative terms were used. Two distinct classes of defects...

  18. Pallets: A Growing Source of Recycled Wood

    Treesearch

    Robert J. Bush; Vijay S. Reddy; Philip A. Araman

    1997-01-01

    Considerable volumes of solid hardwoods, solid softwoods, and wood panels are used to manufacture pallets and containers in the United States. Increasing quantities of these materials are recovered from the waste stream for reuse and recycling. Two important groups involved in this recovery and recycling are firms in the pallet industry (SIC 2448) and landfill...

  19. Bark And Its Possible Uses

    Treesearch

    J. M. Harkin; J. W. Rowe

    1971-01-01

    What to do with bark is a major question facing the wood conversion industries. Optimum utilization of bark residues demands appreciation of the complexity of bark and the extreme variation in chemical and physical properties between barks of different wood species. This report discusses bark structure, past and present utilization, and methods of upgrading bark both...

  20. Wood energy markets, 2010-2011

    Treesearch

    Francisco Aguilar; Christopher Gaston; Rens Hartkamp; Warren Mabee; Kenneth Skog

    2011-01-01

    Global wood energy markets continue to grow, driven primarily by demand in the EU and its commitment to meet 20% of energy consumption from renewable sources by 2020. Large investments in industrial pellet-production capacity have been made under expectations of a continuously growing demand, mainly from the EU. Concern about how energy and climate-change policies may...

  1. Incorporating biopulping technology into wood yard operations

    Treesearch

    Gary M. Scott; Eric Horn; Masood Akhtar; Ross E. Swaney; Michael J. Lentz; David F. Shipley

    1998-01-01

    Biopulping is the treatment of wood chips and other lignocellulosic materials with lignin-degrading fungi prior to pulping. Ten years of industry-sponsored research has demonstrated the technical feasibility of the technology for mechanical pulping at a laboratory scale. Two 50-ton outdoor chip pile trials recently conducted at the USDA Forest Service, Forest Products...

  2. Modelling and simulation of wood chip combustion in a hot air generator system.

    PubMed

    Rajika, J K A T; Narayana, Mahinsasa

    2016-01-01

    This study focuses on modelling and simulation of horizontal moving bed/grate wood chip combustor. A standalone finite volume based 2-D steady state Euler-Euler Computational Fluid Dynamics (CFD) model was developed for packed bed combustion. Packed bed combustion of a medium scale biomass combustor, which was retrofitted from wood log to wood chip feeding for Tea drying in Sri Lanka, was evaluated by a CFD simulation study. The model was validated by the experimental results of an industrial biomass combustor for a hot air generation system in tea industry. Open-source CFD tool; OpenFOAM was used to generate CFD model source code for the packed bed combustion and simulated along with an available solver for free board region modelling in the CFD tool. Height of the packed bed is about 20 cm and biomass particles are assumed to be spherical shape with constant surface area to volume ratio. Temperature measurements of the combustor are well agreed with simulation results while gas phase compositions have discrepancies. Combustion efficiency of the validated hot air generator is around 52.2 %.

  3. Louisiana's forest products industry: performance and contribution to the State's economy, 1970 to 1980.

    Treesearch

    Wilbur R. Maki; Con H Schallau; Bennett B. Foster; Clair H. Redmond

    1986-01-01

    Employment in Louisiana's forest products industry, unlike employment in the other 12 Southern States, decreased significantly between 1970 and 1980. Despite this decrease, the value added by the industry increased. The productivity of Louisiana's forest products industry ranked second among the 13 States in the South. In 1980, lumber and wood products...

  4. Hardwood lumber distribution yards: Output, demands, and perceptions of their role

    Treesearch

    Urs Buehlmann; Omar Espinoza; Robert Smith; Matthew Bumgardner

    2011-01-01

    Efficient and effective supply chains strengthen the entire forest products industry value chain. As the secondary wood products industry has been transformed by the decline of large manufacturers in some industry segments, the industry's supply chain has responded to these new realities. Remaining and new customers tend to be smaller and have unique needs and...

  5. Michigan timber industry: An assessment of timber product output and use, 2004

    Treesearch

    David E. Haugen; Anthony K. Weatherspoon

    2010-01-01

    Reports forest-industry trends, production and receipts of industrial roundwood, and production of saw logs, veneer logs, excelsior/shavings, and other products for Michigan's timber industry in 2004. Also reports logging residue generated from timber harvest operations in Michigan as well as the generation and disposition of wood and bark residue generated by...

  6. Corn forage biological pretreatment by Trametes versicolor in a tray bioreactor.

    PubMed

    Planinić, Mirela; Zelić, Bruno; Čubel, Ivan; Bucić-Kojić, Ana; Tišma, Marina

    2016-08-01

    Trametes versicolor is a white-rot fungus known to be efficient in lignin removal due to its complex extracellular lignocellulolytic enzymatic system. Therefore, it can be used in the treatment of lignocellulose waste from agro, food, and wood industries. In a first experiment, corn forage treatment with T. versicolor was investigated in laboratory jars. In a second experiment, the process was scaled up to a tray bioreactor. In the tray bioreactor, the process of lignin degradation was improved, resulting in an increase in lignin conversion of up to 71% during seven days' treatment. © The Author(s) 2016.

  7. California's forest products industry and timber harvest, 2012

    Treesearch

    Chelsea P. McIver; Joshua P. Meek; Micah G. Scudder; Colin B. Sorenson; Todd A. Morgan; Glenn A. Christensen

    2015-01-01

    This report traces the flow of California's 2012 timber harvest through the primary wood products industry and provides a description of the structure, condition, and economic impacts of California's forest products sector. Historical forest products industry changes are discussed, as well as trends in harvest, production, mill residue, and sales. Also...

  8. Primary forest products industry and industrial roundwood production, Michigan, 1969.

    Treesearch

    James E. Blyth; Allen H. Boelter

    1971-01-01

    Michigan loggers cut 173.8 million cubic feet of industrial roundwood products in 1969. Ninety percent was pulpwood and saw logs. Production is shifting from softwoods to hardwoods. The number of active primary wood-using mills declined rapidly from 1954 to 1969, but production per mill has expanded.

  9. Development of barrier coatings for cellulosic-based materials by cold plasma methods

    NASA Astrophysics Data System (ADS)

    Denes, Agnes Reka

    Cellulose-based materials are ideal candidates for future industries that need to be based on environmentally safe technologies and renewable resources. Wood represents an important raw material and its application as construction material is well established. Cellophane is one of the most important cellulosic material and it is widely used as packaging material in the food industry. Outdoor exposure of wood causes a combination of physical and chemical degradation processes due to the combined effects of sunlight, moisture, fungi, and bacteria. Cold-plasma-induced surface modifications are an attractive way for tailoring the characteristics of lignocellulosic substrates to prevent weathering degradation. Plasma-polymerized hexamethyldisiloxane (PPHMDSO) was deposited onto wood surfaces to create water repellent characteristics. The presence of a crosslinked macromolecular structure was detected. The plasma coated samples exhibited very high water contact angle values indicating the existence of hydrophobic surfaces. Reflective and electromagnetic radiation-absorbent substances were incorporated with a high-molecular-weight polydimethylsiloxane polymer in liquid phase and deposited as thin layers on wood surfaces. The macromolecular films, containing the dispersed materials, were then converted into a three dimensional solid state network by exposure to a oxygen-plasma. It was demonstrated that both UV-absorbent and reflectant components incorporated into the plasma-generated PDMSO matrix protected the wood from weathering degradation. Reduced oxidation and less degradation was observed after simulated weathering. High water contact angle values indicated a strong hydrophobic character of the oxygen plasma-treated PDMSO-coated samples. Plasma-enhanced surface modifications and coatings were employed to create water-vapor barrier layers on cellophane substrate surfaces. HMDSO was selected as a plasma gas and oxygen was used to ablate amorphous regions. Oxygen plasma treated cellophane and oxygen plasma treated and PPHMDSO coated cellophane surfaces were comparatively analyzed and the corresponding surface wettability characteristics were evaluated. The plasma generated surface topographies controlled the morphology of the PPHMDSO layers. Higher temperature HMDSO plasma-state environments lead to insoluble, crosslinked layers. Continuous and pulsed Csb2Fsb6 plasmas were also used for surface modification and excellent surface fluorination was achieved under the pulsed plasma conditions.

  10. Detection of wood failure by image processing method: influence of algorithm, adhesive and wood species

    Treesearch

    Lanying Lin; Sheng He; Feng Fu; Xiping Wang

    2015-01-01

    Wood failure percentage (WFP) is an important index for evaluating the bond strength of plywood. Currently, the method used for detecting WFP is visual inspection, which lacks efficiency. In order to improve it, image processing methods are applied to wood failure detection. The present study used thresholding and K-means clustering algorithms in wood failure detection...

  11. Engineering Biodegradable Flame Retardant Wood-Plastic Composites

    NASA Astrophysics Data System (ADS)

    Zhang, Linxi

    Wood-plastic composites (WPCs), which are produced by blending wood and polymer materials, have attracted increasing attentions in market and industry due to the low cost and excellent performance. In this research, we have successfully engineered WPC by melt blending Polylactic Acid (PLA) and Poly(butylene adipate-co-terphthalate) (PBAT) with recycled wood flour. The thermal property and flammability of the composite are significantly improved by introducing flame retardant agent resorcinol bis(biphenyl phosphate) (RDP). The mechanical and morphological properties are also investigated via multiple techniques. The results show that wood material has increased toughness and impact resistance of the PLA/PBAT polymer matrix. SEM images have confirmed that PLA and PBAT are immiscible, but the incompatibility is reduced by the addition of wood. RDP is initially dispersed in the blends evenly. It migrates to the surface of the sample after flame application, and serves as a barrier between the fire and underlying polymers and wood mixture. It is well proved in the research that RDP is an efficient flame retardant agent in the WPC system.

  12. A cost analysis: processing maple syrup products

    Treesearch

    Neil K. Huyler; Lawrence D. Garrett

    1979-01-01

    A cost analysis of processing maple sap to syrup for three fuel types, oil-, wood-, and LP gas-fired evaporators, indicates that: (1) fuel, capital, and labor are the major cost components of processing sap to syrup; (2) wood-fired evaporators show a slight cost advantage over oil- and LP gas-fired evaporators; however, as the cost of wood approaches $50 per cord, wood...

  13. Process Optimization Assessment: Fort Leonard Wood, MO and Fort Carson, CO

    DTIC Science & Technology

    2003-11-01

    IUJ US Army Corps of Engineers, Engineer Research and Development Center Process Optimization Assessment Fort Leonard Wood, MO and Fort Carson, CO... Optimization Assessment: Fort Leonard Wood, MO and Fort Carson, CO Mike C.J. Lin and John Vavrin Construction Engineering Research Laboratory PO Box 9005...work performed a Process Optimization Assessment (POA) on behalf of Fort Leonard Wood, MO and Fort Carson, CO to identify process, energy, and

  14. Thermal decomposition of wood: kinetics and degradation mechanisms.

    PubMed

    Poletto, Matheus; Zattera, Ademir J; Santana, Ruth M C

    2012-12-01

    The influence of wood components and cellulose crystallinity on the kinetic degradation of different wood species has been investigated using thermogravimetry. Four wood species were studied: Pinus elliottii (PIE), Eucalyptus grandis (EUG), Mezilaurus itauba (ITA) and Dipteryx odorata (DIP). Thermogravimetric results showed that higher extractive contents in the wood accelerate the degradation process and promote an increase in the conversion values at low temperatures. Alternatively, the results indicated that the cellulose crystallinity inhibits wood degradation; organized cellulose regions slow the degradation process because the well-packed cellulose chains impede heat diffusion, which improves the wood's thermal stability. The wood degradation mechanism occurs by diffusion processes when the conversion values are below 0.4. When the conversion values are above 0.5, the degradation is a result of random nucleation with one nucleus in each particle. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Fluvial wood function downstream of beaver versus man-made dams in headwater streams in Massachusetts, USA

    NASA Astrophysics Data System (ADS)

    David, G. C.; DeVito, L. F.; Munz, K. T.; Lisius, G.

    2014-12-01

    Fluvial wood is an essential component of stream ecosystems by providing habitat, increasing accumulation of organic matter, and increasing the processing of nutrients and other materials. However, years of channel alterations in Massachusetts have resulted in low wood loads despite the afforestation that has occurred since the early 1900s. Streams have also been impacted by a large density of dams, built during industrialization, and reduction of the beaver population. Beavers were reintroduced to Massachusetts in the 1940s and they have since migrated throughout the state. Beaver dams impound water, which traps sediment and results in the development of complex channel patterns and more ecologically productive and diverse habitats than those found adjacent to man-made dams. To develop better management practices for dam removal it is essential that we understand the geomorphic and ecologic function of wood in these channels and the interconnections with floodplain dynamics and stream water chemistry. We investigate the connections among fluvial wood, channel morphology, floodplain soil moisture dynamics, and stream water chemistry in six watersheds in Massachusetts that have been impacted by either beaver or man-made dams. We hypothesize that wood load will be significantly higher below beaver dams, subsequently altering channel morphology, water chemistry, and floodplain soil moisture. Reaches are surveyed up- and downstream of each type of dam to better understand the impact dams have on the fluvial system. Surveys include a longitudinal profile, paired with dissolved oxygen and ammonium measurements, cross-section and fluvial wood surveys, hydraulic measurements, and floodplain soil moisture mapping. We found that dissolved oxygen mirrored the channel morphology, but did not vary significantly between reaches. Wood loads were significantly larger downstream of beaver dams, which resulted in significant changes to the ammonium levels. Floodplain soil moisture dynamics revealed that wood loads increased the channel complexity and strengthened connections between the stream channel and floodplain. Future work will continue to explore the complex interconnections between beaver dams, channel morphology, hydraulics, floodplain dynamics and water chemistry.

  16. Charcoal industry grows in the Midwest

    Treesearch

    Joe F. Christopher; D. R. Bower; J. L. Smith; R. C. Thatcher; B. E. Carpenter

    1962-01-01

    The Midsouth manufactured 95, 000 tons of wood charcoal in 1961. This represents a gain of 28 percent over output in 1956, when the industry was last surveyed. The number of charcoal plants has increased from 29 to 90.

  17. Housing market's impact on the secondary woodworking industry

    Treesearch

    Urs Buehlmann; Matt Bumgardner; Al Schuler; Karen. Koenig

    2010-01-01

    The housing correction that started in 2007 and resulted in a global recession, is slowly running its course. Its effect, though, on the secondary wood products industry will continue to have impact for the next few years.

  18. Wood products used for residential repair and remodeling in the United States, 1991

    Treesearch

    D. B. McKeever; R. G. Anderson

    Large amounts of lumber and wood panel products are used annually for the repair and remodeling of residential structures and properties in the United States. In response to the need by government and industry for detailed information on this important market for timber products, a study was conducted by the Timber Demand and Technology...

  19. The wood household furniture and kitchen cabinet industries: a contrast in fortune

    Treesearch

    William G. Luppold; Matthew S. Bumgardner

    2009-01-01

    In 1977, the value of wood household furniture shipments from domestic manufacturers exceeded kitchen cabinet shipments by 170 percent; conversely, in 2006 shipments of cabinets exceeded shipments of furniture by 78 percent. The most apparent reason for the decrease in domestic furniture shipments is the increase in furniture imports, whereas cabinet demand has...

  20. A Planning Guide for Small and Medium Size Wood Products Companies

    Treesearch

    Jeff Howe; Stephen Bratkovich

    2005-01-01

    At the beginning of the 21st century, North American wood products companies are facing competitive pressure from numerous sources. Traditional products are being manufactured in new regions (e.g., China and the developing nations), and substitute products are being developed by competing industries (e.g., plastics and composites). The bottom line is strained by...

  1. New pine planting strategies for the Western Gulf States

    Treesearch

    Eric L. Taylor; Michael Blazier; A. Gordon Holley

    2007-01-01

    The structure of forest industry has experienced major changes over the last few years, both domestically and globally. Mills are closing, companies are merging, and forest products corporations are divesting their lands. The demand for smalldiameter trees in the southern United States has diminished largely due to the amount of wood fiber and wood products now...

  2. Gate-to-Gate Life-Cycle Inventory on Hardwood Sawmills in the Northeastern Region of the United States

    Treesearch

    Richard D. Bergman

    2007-01-01

    Using sustainable building materials is gaining a significant presence in the United States therefore proving sustainability claims are becoming increasingly more important. Certifying wood products as green building materials is vital for the long-term productivity of the wood building industry and for forest management. This study examined hardwood lumber...

  3. Hardwood genetics and tree improvement - A Midwest USA perspective

    Treesearch

    C. H. Michler; R. Meilan; K. E. Woeste; P. M. Pijut; D. Jacobs; P. Aldrich; J. Glaubitz

    2005-01-01

    Fine hardwood trees in the Central Hardwoods region of the United States are an important resource for the furniture, cabinetry, flooring, modular home, and paneling manufacturing industries. Consumers find wood from these trees to be very desirable because of quality factors such as grain, strength and color. To enhance wood production, tree improvement programs can...

  4. Oxygen index evaluation of fire-retardant-treated wood

    Treesearch

    Robert H. White

    1979-01-01

    The applicability of using the oxygen index test (ASTM D 2863-76) to obtain an indication of the relative flammability of fire-retardant- treated wood products was investigated. The oxygen index is the minimum percentage oxygen that is required to maintain flaming combustion of a specimen under specified laboratory conditions. Within the plastics industry, the test is...

  5. Proceedings of the Symposium on Nondestructive Testing of Wood.

    Treesearch

    1964-01-01

    This report summarizes the main points considered and the conclusions reached during the Symposium on Nondestructive Testing, October 7 to 9, 1963, at the Forest Products Laboratory. The purpose of this symposium was to bring research and industry leaders together to examine what is being done in nondestructive testing and discuss its applications to the wood products...

  6. Lumber and Related Products; A Base Syllabus on Wood Technology.

    ERIC Educational Resources Information Center

    Eastern Kentucky Univ., Richmond.

    Prepared by participants in the 1968 National Defense Education Act Institute on Wood Technology, this syllabus is one of a series of basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and content of their programs. The primary objective of this course outline is to point out the…

  7. Tennesse Forest Acreage Increasing

    Treesearch

    R. L. Johnson

    1961-01-01

    Tennessee has 13,432,400 acres of commercial fore st land, according to a new suvey of the State's timber resources. All together, these woodIands occupy 51 percent of the total land are a in Tennessee. The estimate includes all forest land that is producing or is capable of producing industrial wood and not withdrawn from timber utilization. An additional 263,...

  8. Ecological Modernisation and Discourses on Rural Non-Wood Bioenergy Production in Finland from 1980 to 2005

    ERIC Educational Resources Information Center

    Huttunen, Suvi

    2009-01-01

    Rural bioenergy production is currently a much debated question worldwide. It is closely connected to questions of environmental protection and rural development in both developing and industrial world. In Finland, rural bioenergy production has traditionally meant the production of wood fuels for heating purposes. The utilisation of forest…

  9. Chemical Debarking in Bottomland Hardwoods

    Treesearch

    John L. Gammage; G. M. Furnival

    1957-01-01

    Chemical debarking of standing trees, as an alternative to mechanical methods of peeling felled trees and bolts is of continuing interest to industries using bark-free wood for their operation. It has been tried extensively in the North, but because of possible insect and decay losses in usable wood has received less attention in the South. It has not been previously...

  10. Geographic information system-based spatial analysis of sawmill wood procurement

    Treesearch

    Nathaniel M. Anderson; Rene H. Germain; Eddie Bevilacqua

    2011-01-01

    In the sawmill sector of the forest products industry, the clustering of mills and wide variation in forest stocking and ownership result in sawlog markets that are complex and spatially differentiated. Despite the inherent spatial attributes of markets for stumpage and logs, few studies have used geospatial methods to examine wood procurement in detail across...

  11. Labor for thinning--trends and prospects

    Treesearch

    James E. Granskog

    1980-01-01

    The labor supply for timber harvesting has been a chronic issue for the southern pulp and paper industry since the mid-1950s. Whenever woodyard inventories drop substantially below desired levels, a renewed chorus of "Wood Labor Crisis" laments the dwindling labor force in a time of rising wood needs. Now that large acreages of pine plantations are reaching...

  12. 78 FR 58273 - Hardwood and Decorative Plywood From the People's Republic of China: Final Determination of Sales...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-23

    ...\\ Jiangyang Group......... 62.55 Anhui Tiansen Trading Co., Ltd... Linyi City Fei County 59.46 Jianxin Boards... Co., Ltd. Bergey (Tianjin) International Suqian City Santai Wood 59.46 Co., Ltd. Industry Co., Ltd...., Ltd. Deqing Dajiang Import And Export Linyi City Lanshan 59.46 Co., Ltd. District Qifeng Wood Factory...

  13. California forest industry wood consumption and characteristics, 1972.

    Treesearch

    James O. Howard

    1972-01-01

    The California forest industry as it exists today is the product of dramatic post-World War II changes. Before World War II, the industry consisted almost entirely of sawmills, depending primarily upon redwood and pines for their raw material supply. Responding to the post-War building boom and local population growth, the sawmill industry increased rapidly—from 450 to...

  14. Structural characterization of a unique marine animal family 7 cellobiohydrolase suggests a mechanism of cellulase salt tolerance.

    PubMed

    Kern, Marcelo; McGeehan, John E; Streeter, Simon D; Martin, Richard N A; Besser, Katrin; Elias, Luisa; Eborall, Will; Malyon, Graham P; Payne, Christina M; Himmel, Michael E; Schnorr, Kirk; Beckham, Gregg T; Cragg, Simon M; Bruce, Neil C; McQueen-Mason, Simon J

    2013-06-18

    Nature uses a diversity of glycoside hydrolase (GH) enzymes to convert polysaccharides to sugars. As lignocellulosic biomass deconstruction for biofuel production remains costly, natural GH diversity offers a starting point for developing industrial enzymes, and fungal GH family 7 (GH7) cellobiohydrolases, in particular, provide significant hydrolytic potential in industrial mixtures. Recently, GH7 enzymes have been found in other kingdoms of life besides fungi, including in animals and protists. Here, we describe the in vivo spatial expression distribution, properties, and structure of a unique endogenous GH7 cellulase from an animal, the marine wood borer Limnoria quadripunctata (LqCel7B). RT-quantitative PCR and Western blot studies show that LqCel7B is expressed in the hepatopancreas and secreted into the gut for wood degradation. We produced recombinant LqCel7B, with which we demonstrate that LqCel7B is a cellobiohydrolase and obtained four high-resolution crystal structures. Based on a crystallographic and computational comparison of LqCel7B to the well-characterized Hypocrea jecorina GH7 cellobiohydrolase, LqCel7B exhibits an extended substrate-binding motif at the tunnel entrance, which may aid in substrate acquisition and processivity. Interestingly, LqCel7B exhibits striking surface charges relative to fungal GH7 enzymes, which likely results from evolution in marine environments. We demonstrate that LqCel7B stability and activity remain unchanged, or increase at high salt concentration, and that the L. quadripunctata GH mixture generally contains cellulolytic enzymes with highly acidic surface charge compared with enzymes derived from terrestrial microbes. Overall, this study suggests that marine cellulases offer significant potential for utilization in high-solids industrial biomass conversion processes.

  15. Structural characterization of a unique marine animal family 7 cellobiohydrolase suggests a mechanism of cellulase salt tolerance

    PubMed Central

    Kern, Marcelo; McGeehan, John E.; Streeter, Simon D.; Martin, Richard N. A.; Besser, Katrin; Elias, Luisa; Eborall, Will; Malyon, Graham P.; Payne, Christina M.; Himmel, Michael E.; Schnorr, Kirk; Beckham, Gregg T.; Cragg, Simon M.; Bruce, Neil C.; McQueen-Mason, Simon J.

    2013-01-01

    Nature uses a diversity of glycoside hydrolase (GH) enzymes to convert polysaccharides to sugars. As lignocellulosic biomass deconstruction for biofuel production remains costly, natural GH diversity offers a starting point for developing industrial enzymes, and fungal GH family 7 (GH7) cellobiohydrolases, in particular, provide significant hydrolytic potential in industrial mixtures. Recently, GH7 enzymes have been found in other kingdoms of life besides fungi, including in animals and protists. Here, we describe the in vivo spatial expression distribution, properties, and structure of a unique endogenous GH7 cellulase from an animal, the marine wood borer Limnoria quadripunctata (LqCel7B). RT-quantitative PCR and Western blot studies show that LqCel7B is expressed in the hepatopancreas and secreted into the gut for wood degradation. We produced recombinant LqCel7B, with which we demonstrate that LqCel7B is a cellobiohydrolase and obtained four high-resolution crystal structures. Based on a crystallographic and computational comparison of LqCel7B to the well-characterized Hypocrea jecorina GH7 cellobiohydrolase, LqCel7B exhibits an extended substrate-binding motif at the tunnel entrance, which may aid in substrate acquisition and processivity. Interestingly, LqCel7B exhibits striking surface charges relative to fungal GH7 enzymes, which likely results from evolution in marine environments. We demonstrate that LqCel7B stability and activity remain unchanged, or increase at high salt concentration, and that the L. quadripunctata GH mixture generally contains cellulolytic enzymes with highly acidic surface charge compared with enzymes derived from terrestrial microbes. Overall, this study suggests that marine cellulases offer significant potential for utilization in high-solids industrial biomass conversion processes. PMID:23733951

  16. Substitution potentials of recycled HDPE and wood particles from post-consumer packaging waste in Wood-Plastic Composites.

    PubMed

    Sommerhuber, Philipp F; Welling, Johannes; Krause, Andreas

    2015-12-01

    The market share of Wood-Plastic Composites (WPC) is small but expected to grow sharply in Europe. This raises some concerns about suitable wood particles needed in the wood-based panels industry in Europe. Concerns are stimulated by the competition between the promotion of wooden products through the European Bioeconomy Strategy and wood as an energy carrier through the Renewable Energy Directive. Cascade use of resources and valorisation of waste are potential strategies to overcome resource scarcity. Under experimental design conditions, WPC made from post-consumer recycled wood and plastic (HDPE) were compared to WPC made from virgin resources. Wood content in the polymer matrix was raised in two steps from 0% to 30% and 60%. Mechanical and physical properties and colour differences were characterized. The feasibility of using cascaded resources for WPC is discussed. Results indicate the technical and economic feasibility of using recycled HDPE from packaging waste for WPC. Based on technical properties, 30% recycled wood content for WPC is feasible, but economic and political barriers of efficient cascading of biomass need to be overcome. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Five New Wood Decay Fungi (Polyporales and Hymenochaetales) in Korea

    PubMed Central

    Kim, Nam Kyu; Park, Jae Young; Park, Myung Soo; Lee, Hyun; Cho, Hae Jin; Eimes, John A.; Kim, Changmu

    2016-01-01

    The wood decay fungi are a diverse taxonomic group that plays a pivotal role in forest carbon cycling. Wood decay fungi use various enzymatic pathways to digest dead or living wood in order to obtain carbon and other nutrients and these enzymatic systems have been exploited for both industrial and medical applications. Over 600 wood decay fungi species have been described in Korea; however, the recent application of molecular markers has dramatically altered the taxonomy of many of these wood decay fungi at both the genus and species levels. By combining molecular methods, specifically sequences of the internal transcribed spacer region, with traditional morphological characters, this study identified five new species records for Korea in five genera: Aurantiporus, Favolus, Neofavolus, Loweomyces, and Hymenochaetopsis. Three of these genera (Aurantiporus, Favolus, and Loweomyces) were previously unknown in Korea. The relatively simple morphology of the wood decay fungi often leads to ambiguous taxonomic assignment. Therefore, molecular markers are a necessary component of any taxonomic or evolutionary study of wood decay fungi. Our study highlights the need for a more robust and multifaceted approach in investigating new wood decay fungi in Korea. PMID:27790065

  18. Design of pyrolysis reactor for production of bio-oil and bio-char simultaneously

    NASA Astrophysics Data System (ADS)

    Aladin, Andi; Alwi, Ratna Surya; Syarif, Takdir

    2017-05-01

    The residues from the wood industry are the main contributors to biomass waste in Indonesia. The conventional pyrolysis process, which needs a large energy as well as to produce various toxic chemical to the environment. Therefore, a pyrolysis unit on the laboratory scale was designed that can be a good alternative to achieve zero-waste and low energy cost. In this paper attempts to discuss design and system of pyrolysis reactor to produce bio-oil and bio-char simultaneously.

  19. Determination of toxic compounds in paper-recycling process waters by gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry.

    PubMed

    Rigol, A; Latorre, A; Lacorte, S; Barceló, D

    2002-07-19

    Three analytical methods were developed for the determination of toxic compounds in recirculating waters of a paper-recycling industry. Three main groups of compounds were considered: (i) wood extractives originated from the raw material; (ii) biocides added during the production process and (iii) surfactants and other adjuvants present in the formulates of these biocides. Wood extractives considered in this study included fatty and resin acids. They were analysed by liquid-liquid extraction using methyl tert.-butyl ether, followed by gas chromatography-mass spectrometry for previous formation of the respective trimethylsilyl esters. Water samples were also extracted with Oasis HLB (copolymer [poly(divinylbenzene-co-N-vinylpyrrolidone]) solid-phase extraction cartridges of 60 mg and analysed by liquid chromatography-electrospray mass spectrometry for the determination of additives and biocides. Using these two approaches levels up to 15 mg/l for total resin and fatty acids, 5 mg/l for alkylbenzene sulfonates and 2-(thiocyanomethylthio)benzotiazol, 100 microg/l for bisphenol A and 2,2-dibromo-3-nitrilepropionamide, and 300 microg/l for nonylphenol ethoxycarboxylate were detected in process waters at different production treatment stages. These levels are of relevance since poor water quality affects the paper-recycling process, the primary water treatment process and eventually, the environmental water quality.

  20. Publications - PDF 91-6 | Alaska Division of Geological & Geophysical

    Science.gov Websites

    content DGGS PDF 91-6 Publication Details Title: Summary of Alaska's mineral industry for 1990 Authors ., Bundtzen, T.K., and Wood, J.E., 1991, Summary of Alaska's mineral industry for 1990: Alaska Division of

  1. Primary forest products industry and timber use, Kansas, 1980.

    Treesearch

    James E. Blyth; Leonard K. Gould; W. Brad Smith

    1984-01-01

    Highlights recent Kansas forest industry trends, production and receipts of saw logs in 1980, and production of other timber products in 1980. Reports on wood and bark residue generated at primary mills and the disposition of this residue.

  2. Primary forest products industry and timber use, Nebraska, 1980.

    Treesearch

    James E. Blyth; Tom D. Wardle; W. Brad Smith

    1984-01-01

    Highlights recent Nebraska forest industry trends, production and receipts of saw logs in 1980, and production of other timber products in 1980. Reports on wood and bark residue generated at primary mills and the disposition of this residue.

  3. Development of a new approach based on midwave infrared spectroscopy for post-consumer black plastic waste sorting in the recycling industry.

    PubMed

    Rozenstein, Offer; Puckrin, Eldon; Adamowski, Jan

    2017-10-01

    Waste sorting is key to the process of waste recycling. Exact identification of plastic resin and wood products using Near Infrared (NIR, 1-1.7µm) sensing is currently in use. Yet, dark targets characterized by low reflectance, such as black plastics, are hard to identify by this method. Following the recent success of Midwave Infrared (MWIR, 3-12µm) measurements to identify coloured plastic polymers, the aim of this study was to assess whether this technique is applicable to sorting black plastic polymers and wood products. We performed infrared reflectance contact measurements of 234 plastic samples and 29 samples of wood and paper products. Plastic samples included black, coloured and transparent Polyethylene Terephthalate (PET), Polyethylene (PE), Polyvinyl Chloride (PVC), Polypropylene (PP), Polylactic acid (PLA) and Polystyrene (PS). The spectral signatures of the black and coloured plastic samples were compared with clear plastic samples and signatures documented in the literature to identify the polymer spectral features in the presence of coloured material. This information was used to determine the spectral bands that best suit the sorting of black plastic polymers. The main NIR-MWIR absorption features of wood, cardboard and paper were identified as well according to the spectral measurements. Good agreement was found between our measurements and the absorption features documented in the literature. The new approach using MWIR spectral features appears to be useful for black plastics as it overcomes some of the limitations in the NIR region to identify them. The main limitation of this technique for industrial applications is the trade-off between the signal-to-noise ratio of the sensor operating in standoff mode and the speed at which waste is moved under the sensor. This limitation can be resolved by reducing the system's spectral resolution to 16cm -1 , which allows for faster spectra acquisition while maintaining a reasonable signal-to-noise ratio. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Screening and characterizing of xylanolytic and xylose-fermenting yeasts isolated from the wood-feeding termite, Reticulitermes chinensis

    PubMed Central

    Xie, Rongrong; Zhou, Feng; Huang, Miao

    2017-01-01

    The effective fermentation of xylose remains an intractable challenge in bioethanol industry. The relevant xylanase enzyme is also in a high demand from industry for several biotechnological applications that inevitably in recent times led to many efforts for screening some novel microorganisms for better xylanase production and fermentation performance. Recently, it seems that wood-feeding termites can truly be considered as highly efficient natural bioreactors. The highly specialized gut systems of such insects are not yet fully realized, particularly, in xylose fermentation and xylanase production to advance industrial bioethanol technology as well as industrial applications of xylanases. A total of 92 strains from 18 yeast species were successfully isolated and identified from the gut of wood-feeding termite, Reticulitermes chinensis. Of these yeasts and strains, seven were identified for new species: Candida gotoi, Candida pseudorhagii, Hamamotoa lignophila, Meyerozyma guilliermondii, Sugiyamaella sp.1, Sugiyamaella sp. 2, and Sugiyamaella sp.3. Based on the phylogenetic and phenotypic characterization, the type strain of C. pseudorhagii sp. nov., which was originally designated strain SSA-1542T, was the most frequently occurred yeast from termite gut samples, showed the highly xylanolytic activity as well as D-xylose fermentation. The highest xylanase activity was recorded as 1.73 and 0.98 U/mL with xylan or D-xylose substrate, respectively, from SSA-1542T. Among xylanase-producing yeasts, four novel species were identified as D-xylose-fermenting yeasts, where the yeast, C. pseudorhagii SSA-1542T, showed the highest ethanol yield (0.31 g/g), ethanol productivity (0.31 g/L·h), and its fermentation efficiency (60.7%) in 48 h. Clearly, the symbiotic yeasts isolated from termite guts have demonstrated a competitive capability to produce xylanase and ferment xylose, suggesting that the wood-feeding termite gut is a promising reservoir for novel xylanases-producing and xylose-fermenting yeasts that are potentially valued for biorefinery industry. PMID:28704553

  5. Product costing guide for wood dimension and component manufacturers

    Treesearch

    Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K. Wiedenbeck; Steve Lawser

    2014-01-01

    The North American hardwood dimension and components industry plays a critical role in the hardwood forest products industry as the industry is a user of high-value hardwood lumber. Customer expectations, global markets, and international competition, however, require hardwood dimension and components manufacturers to continuously improve their ability to manage their...

  6. Estimating economic impacts of timber-based industry expansion in northeastern Minnesota.

    Treesearch

    Daniel L. Erkkila; Dietmar W. Rose; Allen L. Lundgren

    1982-01-01

    Analysis of current and projected timber supplies in northeastern Minnesota indicates that expanded timber-based industrial activity could be supported. The impacts of a hypothetical industrial development scenario, including construction of waferboard plants and a wood-fueled power plant, were estimated using an input-output model. Development had noticeable impacts...

  7. Primary forest products industry and timber use, Michigan, 1972.

    Treesearch

    James E. Blyth; Allan H. Boelter; Carl W. Danielson

    1975-01-01

    Discusses recent Michigan forest industry trends; timber removals for industrial roundwood in 1972; production and receipts in 1972 of pulpwood, saw logs, veneer logs ,and other roundwood products. Shows trends in pulpwood and veneer-log production, and compares saw log production in 1969 and 1972. Discusses primary wood-using plant residue and its disposition.

  8. 78 FR 60844 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-02

    ... Fangjia Industry Co., Ltd. Shanghai Hospitality Product Mfg., Co., Ltd. Shanghai Maoji Imp And Exp Co...., Jibson Industries Ltd., Always Loyal International Baigou Crafts Factory of Fengkai \\5\\ \\5\\ While the...., Taicang Sunrise Wood Industry Co., Ltd., Taicang Fairmount Designs Furniture Co., Ltd., Meizhou Sunrise...

  9. 76 FR 30393 - Bush Industries, Inc., Including On-Site Leased Workers From Express Employment Professionals and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-25

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,995] Bush Industries, Inc... workers of Bush Industries, Inc., including on-site leased workers from Express Employment Professionals... wood furniture. The determination was issued on February 10, 2011. The Department's Notice will soon be...

  10. Water requirements of the pulp and paper industry

    USGS Publications Warehouse

    Mussey, Orville D.

    1955-01-01

    Water, of varied qualities, is used for several purposes in the manufacture of pulp and paper, as a vehicle for transporting the constituents of paper in the paper machines; as process water for cooking wood chips to make pulp; as a medium for heat transfer; and for washing the pulpwood, the woodpulp, and the machines that handle the pulp. About 3,200 million gallons of water was withdrawn from surface- and ground-water sources each day during 1950 for the use of the pulp and paper industry. This is about 4 percent of the total estimated industrial withdrawal of water in the Nation The paper industry in the United States has been growing at a rapid rate. It has increased about tenfold in the last 50 years and has doubled every 15 years. The 1950 production of paper was about 24 million tons, which amounts to about 85 percent of the domestic consumption. In 1950, the pulp mills of the country produced more than 14 million tons of woodpulp, which supplied about 85 percent of the demand by the paper mills and other industries. The remainder of the fiber for paper manufacture was obtained from imported woodpulp, from reclaimed wastepaper, and from other fibers including rags and straw. The nationwide paper consumption for 1955 has been estimated at 31,700,000 tons. Woodpulp is classified according to the process by which it is made. Every woodpulp has characteristics that are carried over into the many and diverse grades of paper. Groundwood pulp is manufactured by simply grinding up wood and refining the resulting product. Soda, sulfite, and sulfate pulps are manufactured by chemically breaking down the lignin that cements the cellulose of the wood together and removing, cleaning, and sometimes bleaching the resulting fibers. Some woodpulp is produced by other methods. Sulfate-pulp mills are increasing in number and in rated daily capacity and are manufacturing more than half of the present domestic production of woodpulp. Most of the newer and larger woodpulp mills are manufacturing sulfate pulp; because of the antipollution laws, many sulfite-pulp mills are being converted to sulfate-pulp mills. The waste from the manufacture of a ton of sulfate pulp is much more readily disposed of than that from a ton of sulfite pulp. Pulp mills are located near the source of raw material, which means that they are located in the eastern half of the United States and in the Pacific Northwest. It is advantageous for paper mills to be located close to a market and therefore a large number of paper mills are in the northeastern section of the United States from Minnesota to Maine. However, much of the coarser paper, which will ship well, is produced close to the pulp mills. The entire process of making paper from pulpwood, with special reference to water use is briefly described to provide an understanding of how the water is used and reused.

  11. Techno-economic analysis of wood biomass boilers for the greenhouse industry

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chau, J.; Sowlati, T.; Sokhansanj, Shahabaddine

    2009-01-01

    The objective of this study is to perform a techno-economic analysis on a typical wood pellet and wood residue boiler for generation of heat to an average-sized greenhouse in British Columbia. The variables analyzed included greenhouse size and structure, boiler efficiency, fuel types, and source of carbon dioxide (CO2) for crop fertilization. The net present value (NPV) show that installing a wood pellet or a wood residue boiler to provide 40% of the annual heat demand is more economical than using a natural gas boiler to provide all the heat at a discount rate of 10%. For an assumed lifespanmore » of 25 years, a wood pellet boiler system could generate NPV of C$259,311 without electrostatic precipitator (ESP) and C$74,695 with ESP, respectively. While, installing a wood residue boiler with or without an ESP could provide NPV of C$919,922 or C$1,104,538, respectively. Using a wood biomass boiler could also eliminate over 3000 tonne CO2 equivalents of greenhouse gases annually. Wood biomass combustion generates more particulate matters than natural gas combustion. However, an advanced emission control system could significantly reduce particulate matters emission from wood biomass combustion which would bring the particulate emission to a relatively similar level as for natural gas.« less

  12. Participatory approach used to develop a sustainability assessment tool for wood-based bioenergy industry in upper Michigan, USA

    NASA Astrophysics Data System (ADS)

    Vaidya, Ashma; Mayer, Audrey

    2015-04-01

    Biofuel production has grown significantly in the past few decades as a result of global concern over energy security, climate change implications and unsustainable attributes of fossil fuels. Currently, biofuels produced from food crops (such as corn, sugarcane, soy, etc.) constitute the bulk of global biofuel production. However, purported adverse impacts of direct and indirect land-use changes (such as increased food prices, competition for agricultural land and water, and carbon emissions from land-use change) resulting from large-scale expansion of the crop-based biofuel industry have motivated many nations to further shift their attention to second-generation (non crop-based) biofuel production. Current R&D on second-generation biofuel production is largely focused on exploring prospects of using abandoned/fallow land for growing feedstock (such as Jatropha, short rotation woody coppice, Willow/Poplar species, Micanthus etc.), and on producing fuel that is cost-effective and compatible with existing infrastructures. The bulk of existing research on second-generation biofuel production concentrates on enhancing its technical feasibility and compatibility with existing infrastructure; very few have attempted to qualitatively determine and understand stakeholders' concerns and perception regarding this emergent industry. Stakeholders' decisions regarding land and resource use will play a crucial role in ensuring the social sustainability of any industry. Our research is focused on understanding stakeholders' concerns and perceptions regarding biofuel production in the upper Michigan region, where wood-based bioenergy development is being planned and researched by businesses, government agencies, and the local university. Over a century ago, the region's economy was dependent upon mining and clear-cut logging industries, which left the area once the resources were depleted. Since that time, the region has lost significant population due to the lack of economic opportunities, but the forests have recovered to volumes prior to the logging boom. Interest in a wood-based bioenergy production industry is growing, yet whether this industry can be developed sustainably is a concern. The main goal of our research is to incorporate stakeholders' concerns and knowledge into an expert-assisted sustainability assessment tool for a regional wood-based biofuel industry. Key stakeholders involved in the research include landowners, farmers, land management companies, bioenergy users, venture capitalists, interest groups, government organizations and NGOs. We used interviews, focus group meetings and a workshop to collect information from these stakeholders, which were then translated into social sustainability criteria. Multiple criteria analysis methods, Bayesian Belief Network and information collected from other studies were used to develop a final set of sustainability criteria and indicators. Our results provide a platform for experts and stakeholders to understand the local context relevant to sustainability, the state of the science, and will bridge the gap between scientific and non-scientific knowledge in the region. This sustainability assessment tool is intended to facilitate inclusive and sustainability-oriented decision-making for a wood-based bioenergy industry.

  13. Gill bacteria enable a novel digestive strategy in a wood-feeding mollusk

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    O’Connor, Roberta M.; Fung, Jennifer M.; Sharp, Koty H.

    In animals, gut microbes are essential for digestion. Here in this paper, we show that bacteria outside the gut can also play a critical role in digestion. In shipworms, wood-eating marine bivalves, endosymbiotic bacteria are found within specialized cells in the gills. We show that these endosymbionts produce wood-degrading enzymes that are selectively transported to the shipworm’s bacteria-free gut, where wood digestion occurs. Because only selected wood-degrading enzymes are transported, the shipworm system naturally identifies those endosymbiont enzymes most relevant to lignocellulose deconstruction without interference from other microbial proteins. Furthermore, this work expands the known biological repertoire of bacterial endosymbiontsmore » to include digestion of food and identifies previously undescribed enzymes and enzyme combinations of potential value to biomass-based industries, such as cellulosic biofuel production.« less

  14. Gill bacteria enable a novel digestive strategy in a wood-feeding mollusk

    DOE PAGES

    O’Connor, Roberta M.; Fung, Jennifer M.; Sharp, Koty H.; ...

    2014-11-10

    In animals, gut microbes are essential for digestion. Here in this paper, we show that bacteria outside the gut can also play a critical role in digestion. In shipworms, wood-eating marine bivalves, endosymbiotic bacteria are found within specialized cells in the gills. We show that these endosymbionts produce wood-degrading enzymes that are selectively transported to the shipworm’s bacteria-free gut, where wood digestion occurs. Because only selected wood-degrading enzymes are transported, the shipworm system naturally identifies those endosymbiont enzymes most relevant to lignocellulose deconstruction without interference from other microbial proteins. Furthermore, this work expands the known biological repertoire of bacterial endosymbiontsmore » to include digestion of food and identifies previously undescribed enzymes and enzyme combinations of potential value to biomass-based industries, such as cellulosic biofuel production.« less

  15. [Inventory and environmental impact of VOCs emission from the typical anthropogenic sources in Sichuan province].

    PubMed

    Han, Li; Wang, Xing-Rui; He, Min; Guo, Wei-Guang

    2013-12-01

    Based on Sichuan province environmental statistical survey data and other relevant activity data, volatile organic compounds (VOCs) emissions from typical anthropogenic sources in Sichuan province were calculated for the year of 2011 by applying the emission factor method. Besides, ozone and secondary organic aerosol formation potentials of these typical anthropogenic sources were discussed. The total VOC emission from these sources was about 482 kt in Sichuan province, biomass burning, solvent utilization, industrial processes, storage and distribution of fuel, and fossil fuel combustion contributed 174 kt, 153 kt, 121 kt, 21 kt and 13 kt, respectively; architecture wall painting, furniture coating, wood decoration painting and artificial board were the major emission sectors of the solvent utilization; while for the industrial processes, 19.4% of VOCs emission was from the wine industry. Chengdu was the largest contributor compared to the other cities in Sichuan, whose VOCs emission from these typical anthropogenic sources in 2011 was 112 kt. OFP of these sources was 1,930 kt altogether. Solvent utilization contributed 50.5% of the total SOA formation potentials, biomass burning and industrial processes both contributed about 23% , with storage and distribution of fuel and fossil fuel combustion accounting for 1% and 1.4%, respectively.

  16. Formation of wood-plastic composites coupled with forest products

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Meister, J.J.; Zhang, Siyi

    We have developed a method to formulate (wood/paper)-plastic composites and developed a process to prepare materials with maximum strength, durability, and rigidity. We are applying the experience gained from our research to the preparation of wood reinforced, plastic blends. The steps in the process of making wood/plastic composites are described.

  17. Ecosystem processes related to wood decay

    Treesearch

    Bruce G. Marcot

    2017-01-01

    Wood decay elements include snags, down wood, root wads, tree stumps, litter, duff, broomed or diseased branches, and partially dead trees, all of which contribute to ecological processes and biodiversity of the forest ecosystem. Down wood can serve as reservoirs for moisture and mycorrhizal fungi beneficial to the health and growth of commercial tree species. Decaying...

  18. WOOD PRODUCTS IN THE WASTE STREAM: CHARACTERIZATION AND COMBUSTION EMISSIONS - VOLUME 2. APPENDICES

    EPA Science Inventory

    The report gives results of a study of technical, public policy, and regulatory issues that affect the processing and combustion of waste wood for fuel. (NOTE: Waste wood is wood that is separated from a solid-waste stream, processed into a uniform-sized product, and reused for o...

  19. WOOD PRODUCTS IN THE WASTE STREAM: CHARACTERIZATION AND COMBUSTION EMISSIONS - VOLUME 1. TECHNICAL REPORT

    EPA Science Inventory

    The report gives results of a study of technical, public policy, and regulatory issues that affect the processing and combustion of waste wood for fuel. (NOTE: Waste wood is wood that is separated from a solid-waste stream, processed into a uniform-sized product, and reused for o...

  20. Experimental investigation of the laser ablation process on wood surfaces

    NASA Astrophysics Data System (ADS)

    Panzner, M.; Wiedemann, G.; Henneberg, K.; Fischer, R.; Wittke, Th.; Dietsch, R.

    1998-05-01

    Processing of wood by conventional mechanical tools like saws or planes leaves behind a layer of squeezed wood only slightly adhering to the solid wood surface. Laser ablation of this layer could improve the durability of coatings and glued joints. For technical applications, thorough knowledge about the laser ablation process is necessary. Results of ablation experiments by excimer lasers, Nd:YAG lasers, and TEA-CO 2 lasers on surfaces of different wood types and cut orientations are shown. The process of ablation was observed by a high-speed camera system and optical spectroscopy. The influence of the experimental parameters are demonstrated by SEM images and measurement of the ablation rate depending on energy density. Thermal effects like melting and also carbonizing of cellulose were found for IR- and also UV-laser wavelengths. Damage of the wood surface after laser ablation was weaker for excimer lasers and CO 2-TEA lasers. This can be explained by the high absorption of wood in the ultraviolet and middle infrared spectral range. As an additional result, this technique provides an easy way for preparing wood surfaces with excellently conserved cellular structure.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top