Woods. Industrial Arts. Performance Objectives. Junior High School.

ERIC Educational Resources Information Center

Bunch, Edwood; And Others

Several intermediate performance objectives and corresponding criterion measures are listed for a woodworking course for seventh, eighth, and ninth grade students. The seventh grade section includes seven terminal objectives for a 9-week basic hand woodworking course which includes planning and layout, skill in the use of hand tools, construction…

6. Keeper's house, first floor, detail of woodwork, looking northeast ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. Keeper's house, first floor, detail of woodwork, looking northeast from southwest room into northwest room and stair hall - Ram Island Light Station, Ram Island, south of Ocean Point & just north of Fisherman Island, marking south side of Fisherman Island Passage, Ocean Point, Lincoln County, ME

46 CFR 190.05-5 - Woodwork insulated from heated surfaces.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Woodwork insulated from heated surfaces. 190.05-5 Section 190.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH... surfaces. (a) Internal combustion engine exhausts, boiler, and galley uptakes, and similar sources of...

46 CFR 190.05-5 - Woodwork insulated from heated surfaces.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Woodwork insulated from heated surfaces. 190.05-5 Section 190.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH... surfaces. (a) Internal combustion engine exhausts, boiler, and galley uptakes, and similar sources of...

46 CFR 190.05-5 - Woodwork insulated from heated surfaces.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Woodwork insulated from heated surfaces. 190.05-5 Section 190.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH... surfaces. (a) Internal combustion engine exhausts, boiler, and galley uptakes, and similar sources of...

46 CFR 190.05-5 - Woodwork insulated from heated surfaces.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Woodwork insulated from heated surfaces. 190.05-5 Section 190.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH... surfaces. (a) Internal combustion engine exhausts, boiler, and galley uptakes, and similar sources of...

46 CFR 190.05-5 - Woodwork insulated from heated surfaces.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Woodwork insulated from heated surfaces. 190.05-5 Section 190.05-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH... surfaces. (a) Internal combustion engine exhausts, boiler, and galley uptakes, and similar sources of...

29 CFR 1926.304 - Woodworking tools.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth... position. (e) Personal protective equipment. All personal protective equipment provided for use shall conform to subpart E of this part. (f) Other requirements. All woodworking tools and machinery shall meet...

Advanced Woodworking (Industrial Arts) Curriculum Guide. Bulletin 1752.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This curriculum guide contains materials for a 12-unit course in advanced woodworking for grades 11-12. It is intended for use by industrial arts teachers, supervisors, counselors, administrators, and teacher educators. A two-page course overview provides a brief course description; indicates target grade level, prerequisites, course goals, and…

Learning to Read and Write the Woodworking Way.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento. Div. of Vocational Education.

This curriculum guide, one of 15 volumes written for field test use with educationally disadvantaged industrial education students needing additional instruction in the basic skill areas, deals with helping students to develop basic reading and writing skills while studying woodworking. Addressed in the individual units of the guide are the…

Woodworking & housing: impacts & actions

Treesearch

Matt Bumgardner; Urs Buehlmann; Karen Koenig

2015-01-01

The woodworking industry relies heavily on the construction-based markets, particularly those companies involved in cabinetry, furniture, millwork and components. Market conditions, trends and investments all have an impact. It's against this backdrop, that the sixth annual housing market study was conducted in early 2015. A joint effort by Virginia Tech, the U.S...

Cabinetmaker: Apprenticeship Course Outline. Apprenticeship and Industry Training. 3610.3

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2010

2010-01-01

The graduate of the Cabinetmaker apprenticeship program is a certified journeyperson who will: (1)know the characteristics of wood, wood products or substitutes used in industrial woodworking; (2) be proficient with the safe use of hand tools, powered machines and equipment used in industrial woodworking; (3) read and interpret plans and…

The Woodworker's Website: A Project Management Case Study

ERIC Educational Resources Information Center

Jance, Marsha

2014-01-01

A case study that focuses on building a website for a woodworking business is discussed. Project management and linear programming techniques can be used to determine the time required to complete the website project discussed in the case. This case can be assigned to students in an undergraduate or graduate decision modeling or management science…

Industrial Arts 7-9. Manufacturing: Metalwork, Plastics, Woodwork, Manufacturing.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg. Div. of Vocational Education.

This curriculum guide provides materials for the industrial arts (grades 7-9) subject cluster of manufacturing. This subject cluster has four areas of study: metalwork, plastics, woodwork, and manufacturing. Introductory materials include an overview of the industrial arts curriculum in its entirety, a listing of program objectives for each of the…

Woodworking Safety. A Guide for Teachers of Limited English Proficient Students.

ERIC Educational Resources Information Center

Umatilla Education Service District, OR.

This packet of materials was developed (1) to address the liability concerns of woodworking instructors by providing safety instruction materials and tests for limited English proficient (LEP) or Spanish-speaking students, and (2) to provide some ideas, strategies, and resources for working effectively with LEP students in the vocational…

Community Living Skills Guide: Beginning Woodworking.

ERIC Educational Resources Information Center

Miller, Steve; Smith, Don

This is one of twenty course guides in the Community Living Skills Guide for the College for Living series which provides guidelines and workbook activities for the course, Beginning Woodworking, Use of Basic Hand Tools and Shop Safety. The series of courses for developmentally disabled adults is intended to supplement residential programs and to…

Investment activities in the U.S. secondary woodworking industry

Treesearch

Matthew Bumgardner; Urs Buehlmann; Karen Koenig

2017-01-01

The U.S. secondary woodworking industry has shown signs of improvement after the steep losses in sales volume associated with the housing crisis that began in 2007. Employment in several sectors has begun to increase, suggesting that companies that survived the downturn are positioning to increase sales growth. It is likely that investment plans to improve firm-level...

Agricultural Construction Volume II. Oxy-Gas and Other Cutting/Welding Processes. Woodworking, Metals, Finishing. Instructor's Guide.

ERIC Educational Resources Information Center

Admire, Myron; Maricle, Gary

This guide contains instructor's materials for teaching a secondary agricultural construction course consisting of instructional units on oxy-gas and other cutting and welding processes (10 lessons), woodworking (6 lessons), metals (10 lessons), and finishing (4 lessons). The materials for each unit include student objectives, a list of…

Esme Hadfield (1921-92) and the Wycombe woodworkers.

PubMed

Whiteside, O J H; Corbridge, R J; Capper, J W R

2010-02-01

This paper reflects on the life and work of Esme Hadfield, an otolaryngologist based at Wycombe General Hospital and, in particular, on her discovery of the link between adenocarcinoma of the paranasal sinuses and wood dust exposure from those in the furniture industry. The paper also explores the woodworking industry that forms the backdrop to her discovery.

Surviving the deepening downturn

Treesearch

Urs Buehlmann; Matt Bumgardner; Al Schuler; Jeff Crissey

2009-01-01

With the housing crisis having spread to the entire economy, woodworking companies face challenges to position themselves for future opportunities for profits and growth. What is the industry doing to sustain itself? As a follow-up to last year's survey, an exclusive study by Virginia Tech, the U.S. Forest Service and Modern Woodworking took an updated look at the...

Woodworking, Giving to Others Helps One Parent Cope with Child's Diagnosis

ERIC Educational Resources Information Center

Newport, Scott

2006-01-01

In this article, the author relates how woodworking had helped him cope with his son's illness. His son, Evan, was diagnosed with Noonan's Syndrome. Due to his desire in showing his appreciation for the medical personnel who treated his son, the author started to make wooden stools and gave these to the doctors and nurses. His project continued…

To what do firms attribute success? An application of attribution theory to the secondary woodworking industry

Treesearch

Matthew Bumgardner; Urs Buehlmann

2015-01-01

Small firms are a critical component of the secondary woodworking industry and are important to hardwood lumber demand in the US. Understanding managers' perceptions of competitiveness in these firms is important to those working with the industry to help maintain a viable wood manufacturing base. One area of interest relative to the overall business environment...

Operation and cost of a small dehumidification dry kiln

Treesearch

Richard D. Bergman

2008-01-01

Obtaining small quantities of custom kiln-dried lumber can be an expensive process for an individual woodworker. Building and operating a small kiln capable of drying custom cuts of lumber (such as slabs, bowl blanks) gives woodworkers another option. Our approach was to build and operate a small dehumidification dry kiln. The four charges of lumber ranged from 600 to...

Woodworking Guide for Visually Handicapped Students. A Five County Vocational Skills Training Program for the Blind.

ERIC Educational Resources Information Center

Gaver, Wayne

Presented is an industrial arts curriculum guide for woodworking which developed out of a 3 year program designed to meet the unmet vocational education needs of visually impaired students enrolled in junior high, secondary, and community colleges in a five county region of California, and to provide inservice training to regular vocational…

Work-related symptoms and dose-response relationships for personal exposures and pulmonary function among woodworkers.

PubMed

Mandryk, J; Alwis, K U; Hocking, A D

1999-05-01

Four sawmills, a wood chipping mill, and five joineries in New South Wales, Australia, were studied for the effects of personal exposure to wood dust, endotoxins. (1-->3)-beta-D-glucans, Gram-negative bacteria, and fungi on lung function among woodworkers. Personal inhalable and respirable dust sampling was carried out. The lung function tests of workers were conducted before and after a workshift. The mean percentage cross-shift decrease in lung function was markedly high for woodworkers compared with the controls. Dose-response relationships among personal exposures and percentage cross-shift decrease in lung function and percentage predicted lung function were more pronounced among joinery workers compared with sawmill and chip mill workers. Woodworkers had markedly high prevalence of regular cough, phlegm, and chronic bronchitis compared with controls. Significant associations were found between percentage cross-shift decrease in FVC and regular phlegm and blocked nose among sawmill and chip mill workers. Both joinery workers and sawmill and chip mill workers showed significant relationships between percentage predicted lung function (FVC, FEV1, FEV1/FVC, FEF25-75%) and respiratory symptoms. Wood dust and biohazards associated with wood dust are potential health hazards and should be controlled.

Fall Department Head Report--Reporting Booklet 2.0 to the Massachusetts Division of Occupational Education (Fiscal Year Ending June 30, 1975) for Woodworking.

ERIC Educational Resources Information Center

Management and Information System for Occupational Education, Winchester, MA.

The reporting booklet is required for the Census Data System (CDS) of the Management Information System for Occupational Education (MISOE); it contains the reporting forms which collect data that describe program structure and job-entry skill outcomes expected of program completors in the individual occupational education area of woodworking.…

Immunoglobulin E-mediated sensitization to pine and beech dust in relation to wood dust exposure levels and respiratory symptoms in the furniture industry.

PubMed

Schlünssen, Vivi; Kespohl, Sabine; Jacobsen, Gitte; Raulf-Heimsoth, Monika; Schaumburg, Inger; Sigsgaard, Torben

2011-03-01

Wood dust exposure may cause Immunoglobulin E (IgE)-mediated allergic diseases. Our objectives were to estimate pine and beech dust sensitization rates among woodworkers and a reference group, explore the association between exposure and sensitization and between sensitization and respiratory symptoms, and finally investigate the impact of proteinogenic specific IgE (sIgE) epitopes on respiratory symptoms. In a Danish study among 52 furniture factories and 2 reference factories, we evaluated the workers' asthma and rhinitis status using questionnaires and blood samples collected from 1506 woodworkers and 195 references. Workers with asthma symptoms (N=298), a random study sample (N=399) and a random rhinitis sample (N=100) were evaluated for IgE-mediated sensitization to pine and beech dust. The prevalence of pine and beech sensitization among current woodworkers was 1.7 and 3.1%, respectively. No differences in sensitization rates were found between woodworkers and references, but the prevalence of wood dust sensitization was dose-dependently associated with the current level of wood dust exposure. No relation was observed between wood dust sensitization per se and respiratory symptoms. Only symptomatic subjects had proteinogenic IgE epitopes to pine. Increased odds ratios for sIgE based on proteinogenic epitopes to beech and respiratory symptoms were found, although they were not statistically significant. Sensitization rates to pine and beech were the same for woodworkers and references but dependent on the current wood dust exposure level. The importance of beech and pine wood sensitization is limited, but may be of clinical significance for a few workers if the IgE epitopes are proteinogenic.

Ergonomics work stations decreases the health impairment and saves electrical energy at the woodworking workshop in Bali, Indonesia.

PubMed

Sudiajeng, Lilik; Adiputra, Nyoman; Leibbrandt, Richard

2012-12-01

This research was conducted to assess the positive effect of the ergonomics work station on the health impairment and electrical energy usage at the woodworking workshop in Bali, Indonesia. Woodworking workshops are dangerous, particularly when they are used improperly. Workers are exposed to health hazards that cause health impairment and inefficiencies in their work conditions. A preliminary study at a woodworking workshop at the Bali State Polytechnic showed that the work station was not suitable to body size of the participants and caused awkward postures. In addition, there was also an inappropriate physical work environment. Both inappropriate work station and physical work environment caused participants to be less active and motivated. This paper reports on an experimental study into the effects of an ergonomic intervention at this workshop. The participants were 2 groups of male students with 10 participants in each group. The first group performed the task with the original work station as a control group, while the second group performed the task with the new work station. The study found a significant difference between groups (p < 0.05) both for the health impairment and the electrical energy usage. The ergonomics intervention on the work station decreased the working heart rate (16.7%), the total score of musculoskeletal disorders (17.3%), and the total score of psychological fatigue (21.5%). Furthermore, it also decreased the electrical energy usage (38.7%). This shows that an ergonomics intervention on work station decreased the health impairment and saved electrical energy usage. It also protected the workers from woodworking hazards and allowed participants to perform their tasks in healthy, safe, convenient and efficient work conditions.

A Comparative Study of Teacher Education Institutions and Machine Tool Manufacturers to Determine Course Content for a Machine Tool Maintenance Course in the Woodworking Area.

ERIC Educational Resources Information Center

Polette, Douglas Lee

To determine what type of maintenance training the prospective industrial arts teacher should receive in the woodworking area and how this information should be taught, a research instrument was constructed using information obtained from a review of relevant literature. Specific data on machine tool maintenance was gathered by the use of two…

Woodworking injuries: a comparative study of work-related and hobby-related accidents.

PubMed

Loisel, F; Bonin, S; Jeunet, L; Pauchot, J; Tropet, Y; Obert, L

2014-10-01

The primary objective of this study was to describe the injury characteristics and demographics of patients injured during woodworking activities, upon their arrival to the emergency department in a regional of France where this industry is prevalent. The secondary objective was to compare patient and injury characteristics for work-related and hobby-related accidents. A cohort of 87 patients who had suffered a woodworking accident over a two-year period was evaluated; 79 were available for follow-up. The context and circumstances of the accident, nature and location of the injuries and patient demographics were recorded. Hobby-related accidents accounted for two-thirds of the accidents (51/79). Most of the injured workers were either loggers (35%) or carpenters (46%). The hand was injured in 53 cases (67%). Work-related accidents resulted in significantly more serious consequences in terms of hospital stay, work stoppage, resumption of work or retraining than hobby-related accidents. For the workplace accidents, 86% occurred on new machines; more than 25% of the machines involved in accidents at home were over 15 years. Sixty-eight per cent of workers were wearing their safety gear, while only 31% of those injured during recreational woodworking wore the appropriate gear. Several elements of prevention should be improved: information about the need to maintain the equipment, protect the worker with suitable clothing, and learn which maneuvers are considered hazardous. Safety gear should be regularly inspected in the workplace. Copyright © 2014. Published by Elsevier SAS.

Prime Contract Awards by Service Category and Federal Supply Classification, Fiscal Years 1977, 1978, 1979, 1980.

DTIC Science & Technology

1980-01-01

MACHINES NA 19 284 14 3590 MISC SERVICE AND TRADE EQUIPMENT 318 1,412 981 771 TOTAL 4,759 5,835 8,057 8,338 36 SPECIAL INDUSTRY MACHINERY 3605 FOOD... MACHINES 144 79 26 55 3615 PULP AND PAPER INDUSTRIES MACHINERY 383 671 651 813 3620 RUBBER A PLASTIC WORKING MACHINERY 500 364 234 182 3625 TEXTILE... MACHINERY 76 18 36 29 3220 WOODWORK!NG MACHINES 1,769 1,902 1,389 635 3230 TOOLS - ATTACHMENTS FOR WOODWORKING MACH NA NA 61 858 TOTAL 1,845 1,920 1,486

Health education: Effect on knowledge and practice of workplace personal hygiene and protective measures among woodworkers in Enugu, Nigeria.

PubMed

Ezeugwu, L; Aguwa, E N; Arinze-Onyia, S U; Okeke, T A

2017-07-01

There has been increasing incidence of occupational diseases among woodworkers due to exposure to preventable hazards in the workplace. The objective of this study was to determine the effects of health education on the knowledge and practice of workplace hygiene and protective measures among woodworkers in Enugu timber market. This was a before and after study conducted among 290 woodworkers using interviewer administered semi-structured questionnaire and manual on workplace hazards prevention. Data were analyzed using Statistical Package for Social Sciences (SPSS) version 17 and P-value of 0.05 was set as the significance level. Two hundred and ninety respondents participated in the study; 282 (97.2%) were males, most completed secondary education and had worked for less than 10 years (71% and 58.3%, respectively). The mean knowledge score of participants pre- and postintervention were 89.5% ± 9.03 and 98.5% ± 1.84, respectively (P < 0.001). Educational status had effect on knowledge of participants (P < 0.001), whereas work experience had no effect (P = 0.285). Preintervention, 37.9% of the participants used protective materials regularly, which increased to 65.8% post intervention (P < 0.001). Personal hygiene practices showed mixed responses most of which improved post intervention. The most common reason for eating in workplace was excessive workload (60.3%), while lack of PPEs (29.3%) and lack of training (23.8%) were the most common reasons for nonuse of PPEs. Majority of the participants had good knowledge of workplace hygiene but had poor use of PPEs. Health education intervention improved the use of PPEs and should be recommended.

Dating furniture and coopered vessels without waney edge - Reconstructing historical wood-working in Austria with the help of dendrochronology.

PubMed

Klein, Andrea; Nemestothy, Sebastian; Kadnar, Julia; Grabner, Michael

In the present study, 208 furniture and 168 coopered vessels from three Austrian museums were examined. Dendrochronology was used to date objects and to extract further information such as the necessary time for seasoning, wood loss through wood-working and methods of construction. In most cases sampling was done by sanding the cross section and making digital photographs using a picture frame and measuring digitally. The dendrochronological dates of the sampled furniture range between 1524 and 1937. The group of furniture includes cupboards, chests, tables, benches, commodes and beds. In many cases furniture was artfully painted and sometimes even shows a painted year. With the help of dendrochronology it was proved that some objects had been painted for some time after construction, or had been over-painted. Most furniture, however, was painted immediately after completion. In this case, the seasoning and storage time of the boards and the wood loss due to shaping can be verified. As an average value, 14 years have passed between the dendrochronological date of the outermost ring and the painting. The time span includes time of seasoning and storage and the rings lost by wood-working. This leads, on the one hand to a short storage time of less than 10 years and on the other hand to very little wood loss due to manufacturing. Those boards being less shaped turned out to be back panels of cupboards, therefore they are recommended to be sampled for dating. Coopered vessels were dated between 1612 and 1940. There was evidence that staves were split and not sawn in many cases. The staves were often split out of the outermost part of the tree and hardly any wood was worked away which was proved by the close dendrochronological dates of the single staves of a vessel. Since there is a short time of storage and only little wood loss through wood-working, dating of objects without a waney edge becomes reasonable.

Occupational exposure to wood dust and health effects on the respiratory system in a minor industrial estate in Bursa, Turkey.

PubMed

Osman, Erdinç; Pala, Kayihan

2009-01-01

The aim of this study was to estimate occupational exposure to wood dust in the furniture industry in a minor industrial estate in Bursa, Turkey. The study was conducted between October 2006 and May 2007. In this study, a total of 656 persons, 328 woodworkers and 328 controls were included. A questionnaire was used in the study. Physical examination and the pulmonary function tests (MIR-Spirobank G) of the workers were performed. A portable Aircheck 2000 pump was used to collect the specimens of wood dust from the workplaces. NIOSH Method 0500 was employed for the gravimetric measurements of dust. The average dust concentration at the workplace was 2.04+/-1.53 mg/m3. It was reported that 176 of workers (53.7%) had blocked nose while working, 141 (43.0%) had redness of the eyes, 135 (41.2%) had itching eyes and 78 (23.8%) had runny nose. No symptoms were observed in the control group while they were working at the workplace. The mean FEV1 and FVC values of woodworkers, among both smokers and non smokers, were significantly low, although the FEV1/FVC value was high (p < 0.05). An increase both in FEV1 and FVC values was detected among the woodworkers who had a working period less than 10 years and were exposed to wood dust at concentrations over 4 mg/m3 compared to the woodworkers who were exposed to wood dust at less than 4 mg/m3 (p < 0.05). As a result, in this study it was pointed out that the exposure to wood dust adversely influenced the workers respiratory functions. Besides, in this study a question associated with the healthy worker effect that can adversely influence health of workers exposed to wood dust at less than (4 mg/m3) is revealed.

Cancer incidence among workers exposed to softwood dust in Lithuania.

PubMed

Smailyte, Giedre

2012-06-01

The aim of this study was to assess cancer incidence in a cohort of woodworkers exposed to softwood dust in a Lithuanian wooden joinery products factory. The study population consisted of 1518 workers (1080 men and 438 women) employed in the factory for at least 1 year between 1947 and 1996 and living in Lithuania on 1 January 1978, when the follow-up for cancer incidence began. The follow-up period for cancer was 1978-2007. Cancer risk was assessed by standardised incidence ratios (SIR) with reference to the national population. Overall cancer incidence was not increased among woodworkers. However, the number of mouth and pharynx cancer cases among male woodworkers was significantly increased compared with expected numbers (SIR 2.19, 95% CI 1.17 to 3.74). A higher risk was found for cancer of the buccal cavity than for pharyngeal cancer (SIRs 2.83 and 1.45, respectively). The SIR for larynx cancer was also elevated (SIR 1.39, 95% CI 0.64 to 2.64) among men, while the number of lung cancer cases was higher than expected only among women (SIR 2.07, 95% CI 00.57 to 5.31). This results of this study support the hypothesis that exposure to softwood dust may increase the risk of oral and pharyngeal cancer. No support was found for an increased risk of other respiratory cancers among workers exposed to softwood dust.

Transitions.

ERIC Educational Resources Information Center

Field, David; And Others

1992-01-01

Includes four articles: "Career Aspirations" (Field); "Making the Transition to a New Curriculum" (Baker, Householder); "How about a 'Work to School' Transition?" (Glasberg); and "Technological Improvisation: Bringing CNC to Woodworking" (Charles, McDuffie). (SK)

Amputations

MedlinePlus

... powered and non-powered conveyors, printing presses, roll-forming and roll- bending machines, food slicers, meat grinders, ... processing machines, paper products machines, woodworking machines, metal-forming machines, and meat slicers. How can I get ...

Hypersensitivity Pneumonitis

MedlinePlus

... breed animals or birds, cheese washers, woodworkers, and wine makers—have a greater chance of exposure to ... this test, talk to your doctor about the benefits and possible risks of this procedure. Lung biopsies ...

Occupational risks for nasal cancer in Sweden.

PubMed

Hemelt, Marjolein; Granström, Charlotta; Hemminki, Kari

2004-10-01

An elevated risk of nasal cancer (NC) has been associated with numerous occupations but with contradicting results. We sought to address recent and current risks of NC in a nationwide study. The nationwide Swedish Family-Cancer Database was used to calculate standardized incidence ratios (SIRs) for 52 occupational groups. SIRs were adjusted for age and socioeconomic status. Among 739 male cases, significantly elevated SIRs for nasal adenocarcinoma were observed in woodworkers, teachers, and fishermen. In woodworkers, the risk increased with a longer occupational history in exposure to softwood in combination with hardwood. Electrical workers had a significant elevated risk for squamous cell carcinoma. Among 182 female cases, significantly elevated SIRs were observed in glass, ceramic, and tile workers. The study identified some known risk occupations and suggested some new ones.

How Much Does it Cost to Go Metric?

ERIC Educational Resources Information Center

Lindbeck, John R.

1976-01-01

Presents information on metric conversion costs and offers suggestions to aid teachers in making intelligent decisions with regard to programs in drafting, woodworking, metal working, and graphic arts. (HD)

11. Exterior detail view of northeast corner, showing stucco finish ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Exterior detail view of northeast corner, showing stucco finish and woodwork details - American Railway Express Company Freight Building, 1060 Northeast Division Street, Bend, Deschutes County, OR

The effect of different workplace nanoparticles on the immune systems of employees

NASA Astrophysics Data System (ADS)

Kurjane, Natalja; Zvagule, Tija; Reste, Jelena; Martinsone, Zanna; Pavlovska, Ilona; Martinsone, Inese; Vanadzins, Ivars

2017-09-01

Currently, nanoparticles are widely present in the environment and are being used in various industrial technologies. Nanoparticles affect immune functions, causing different immune responses. The aim of the current study was to evaluate several cytokines, interleukin (IL)-1b, IL-6, IL-8, tumour necrosis factor-a (TNF-α), interferon-γ, adhesive molecule sICAM-1, macrophage inhibitory protein 1a (MIP1a) and secretory immunoglobulin A, in nasal lavage fluid and in the peripheral blood of healthy subjects exposed to workplace nanoparticles. Thirty-six employees from three different environments were examined: 12 from a metalworking company, 12 from a woodworking company and 12 office workers. The nanoparticles in the different workplaces were detected in the air in the immediate vicinity of the employees. The particle number concentration and surface area values were significantly higher in the workplaces of the metal- and woodworking industries, but concentrations of mass were lower (the measurements were performed by an electrical low-pressure impactor ELPI+). Energy dispersive X-ray spectroscopy (EDS, an attachment to a high-resolution SEM) was used to provide elemental analysis or chemical characterization of the dust particles in a low-vacuum field-free mode operating at a potential of 15 kV spot 3.0. The technique used provided quantitative and spatial analyses of the distribution of elements through mapping (two to three parallel measurements) and point analysis (four to five parallel measurements). Samples from the metal industry contained more ultramicroscopic and nanometric particles, e.g. toxic metals such as Zn, Mn and Cr, and fewer microscopic dust particles. The nasal lavage and peripheral blood were taken at the beginning and the end of the working week, when immune indices were measured. Our data showed a statistically significant increased level of the pro-inflammatory cytokine TNF-α in serum in both exposed groups compared with office workers as well as a higher level of TNF-α in workers from the woodworking company compared with the metalworking employees. We found an elevated level of IL-6 in the exposed groups as well as an elevated level of IL-8 in the nasal lavage in woodworking employees after work.

Asthma-like symptoms, atopy, and bronchial responsiveness in furniture workers.

PubMed

Talini, D; Monteverdi, A; Benvenuti, A; Petrozzino, M; Di Pede, F; Lemmi, M; Carletti, A; Macchioni, P; Serretti, N; Viegi, G; Paggiaro, P

1998-11-01

To study the role of individual and occupational risk factors for asthma in furniture workers. 296 workers were examined (258 men, 38 women) with a questionnaire of respiratory symptoms and diseases, baseline spirometry, bronchial provocative test with methacholine, and skin prick tests. Non-specific bronchial hyperreactivity was defined as when a provocative dose with a fall of 20% in forced expiratory volume in 1 second (PD20FEV1) was < 0.8 mg and atopy in the presence of at least one positive response to skin prick tests. Workers were subdivided into spray painters (exposed to low concentrations of diisocyanates and solvents), woodworkers (exposed to wood dusts), and assemblers (control group). The prevalences of attacks of shortness of breath with wheezing and dyspnoea were higher in spray painters (13.5% and 11.5% respectively) than in woodworkers (7.7% and 6.3%) or in assemblers (1.6% and 1.6%); prevalences of chronic cough, asthma, and rhinitis were also slightly but not significantly higher in spray painters and in woodworkers than in assemblers. The difference in the prevalence of respiratory symptoms among the job titles was due to the atopic subjects, who showed a higher prevalence of chronic cough, wheeze, shortness of breath with wheeze, dyspnoea, and asthma in spray painters than in the other groups. The prevalence of non-specific bronchial hyperreactivity in subjects who performed bronchial provocative tests was 17.7%, with no significant difference among groups. Asthma symptoms were significantly associated with non-specific bronchial hyperreactivity. Asthma-like symptoms plus non-specific bronchial hyperreactivity was found in 4% of assemblers, 10% of woodworkers, and 13.3% of spray painters (chi 2 = 2.6, NS). Multiple logistic analysis taking into account individual (smoke, atopy, age) and occupational (job titles) risk factors confirmed that spray painters had higher prevalence of chronic cough than assemblers, and a trend in increasing the prevalence of shortness of breath with wheeze, dyspnoea, and asthma. Painters in the furniture industry, particularly atopic subjects, are at higher risk of asthma-like symptoms than other job titles. In these workers asthma-like symptoms are more sensitive than non-specific bronchial hyperreactivity in detecting a negative effect of the occupational exposure.

Sample size considerations for studies of intervention efficacy in the occupational setting.

PubMed

Lazovich, Deann; Murray, David M; Brosseau, Lisa M; Parker, David L; Milton, F Thomas; Dugan, Siobhan K

2002-03-01

Due to a shared environment and similarities among workers within a worksite, the strongest analytical design to evaluate the efficacy of an intervention to reduce occupational health or safety hazards is to randomly assign worksites, not workers, to the intervention and comparison conditions. Statistical methods are well described for estimating the sample size when the unit of assignment is a group but these methods have not been applied in the evaluation of occupational health and safety interventions. We review and apply the statistical methods for group-randomized trials in planning a study to evaluate the effectiveness of technical/behavioral interventions to reduce wood dust levels among small woodworking businesses. We conducted a pilot study in five small woodworking businesses to estimate variance components between and within worksites and between and within workers. In each worksite, 8 h time-weighted dust concentrations were obtained for each production employee on between two and five occasions. With these data, we estimated the parameters necessary to calculate the percent change in dust concentrations that we could detect (alpha = 0.05, power = 80%) for a range of worksites per condition, workers per worksite and repeat measurements per worker. The mean wood dust concentration across woodworking businesses was 4.53 mg/m3. The measure of similarity among workers within a woodworking business was large (intraclass correlation = 0.5086). Repeated measurements within a worker were weakly correlated (r = 0.1927) while repeated measurements within a worksite were strongly correlated (r = 0.8925). The dominant factor in the sample size calculation was the number of worksites per condition, with the number of workers per worksite playing a lesser role. We also observed that increasing the number of repeat measurements per person had little benefit given the low within-worker correlation in our data. We found that 30 worksites per condition and 10 workers per worksite would give us 80% power to detect a reduction of approximately 30% in wood dust levels (alpha = 0.05). Our results demonstrate the application of the group-randomized trials methodology to evaluate interventions to reduce occupational hazards. The methodology is widely applicable and not limited to the context of wood dust reduction.

46 CFR 127.220 - General fire protection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of and insulated from woodwork and other combustible matter. (c) Paint lockers and similar... ventilated battery locker that— (1) Is located above the main deck; (2) Is located in the open; and (3) Has...

46 CFR 127.220 - General fire protection.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of and insulated from woodwork and other combustible matter. (c) Paint lockers and similar... ventilated battery locker that— (1) Is located above the main deck; (2) Is located in the open; and (3) Has...

46 CFR 127.220 - General fire protection.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of and insulated from woodwork and other combustible matter. (c) Paint lockers and similar... ventilated battery locker that— (1) Is located above the main deck; (2) Is located in the open; and (3) Has...

46 CFR 127.220 - General fire protection.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of and insulated from woodwork and other combustible matter. (c) Paint lockers and similar... ventilated battery locker that— (1) Is located above the main deck; (2) Is located in the open; and (3) Has...

46 CFR 127.220 - General fire protection.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of and insulated from woodwork and other combustible matter. (c) Paint lockers and similar... ventilated battery locker that— (1) Is located above the main deck; (2) Is located in the open; and (3) Has...

6. William E. Barrett, Photographer, 1975. GENERAL VIEW LOOKING EAST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. William E. Barrett, Photographer, 1975. GENERAL VIEW LOOKING EAST. SAWMILL ON RIGHT. SECONDARY WOODWORKING SHOPS ON LEFT PARTIALLY DEMOLISHED. - Meadow River Lumber Company, Highway 60, Rainelle, Greenbrier County, WV

[Medical certification in workers involved in logging and wood-processing].

PubMed

Romankow, Jacek

2007-01-01

Activities involved in forestry and woodworking industry are associated with workers being exposed to numerous environmental and technology-related factors that are detrimental to their health. Such hazards include working in changeable climatic conditions, in the vicinity of heavy equipment, exposure to noise, chainsaw vibrations, enforced body positioning, hard physical work, the effect of exhaust gases, potential effects of biological factors, including epizootic diseases. Wood processing involves performing mechanical activities employing tools and machines, as well as processes utilizing various chemical substances. Forestry and woodworking industry workers may deal both with timber and with wood products. In medical certification, the following issues are of significance: work in the vicinity of rotational elements, noise, effects of chemicals or biological factors, including carcinogenic substances. For this reason, the procedures involved in medical examinations of such workers are complex.

Old Time Craftsmanship.

ERIC Educational Resources Information Center

American School and University, 1983

1983-01-01

The new multipurpose building at Lourdes College (Ohio) features ceramic mosaic murals designed, executed, and fired by the art faculty. Craftsmanship shows in the woodwork, flooring, and in the more than 100 brick arches built by local masons. (Author/MLF)

Housing market's impact on the secondary woodworking industry

Treesearch

Urs Buehlmann; Matt Bumgardner; Al Schuler; Karen. Koenig

2010-01-01

The housing correction that started in 2007 and resulted in a global recession, is slowly running its course. Its effect, though, on the secondary wood products industry will continue to have impact for the next few years.

What's your relationship with computerized manufacturing technologies -- functional, dysfunctional or non-existent?

Treesearch

Jan Wiedenbeck; Jeff Parsons; Bruce Beeken

2009-01-01

Computer-aided manufacturing (CAM), in which computer-aided design (CAD) and computer numerically controlled (CNC) machining are integrated for the production of parts, became a viable option for the woodworking industry in the 1980s.

Woodworking Technology.

ERIC Educational Resources Information Center

San Diego State Coll., CA. Dept. of Industrial Arts.

Six teaching units which were developed by the 24 institute participants are given. "Wood Identification and Chemistry" covers the physical properties and structural features of hardwoods and softwoods. "Seasoning" explains air drying, kiln drying, and seven special lumber seasoning processes. "Research on Laminates"…

Asthma-like symptoms, atopy, and bronchial responsiveness in furniture workers

PubMed Central

Talini, D.; Monteverdi, A.; Benvenuti, A.; Petrozzino, M.; Di, P; Lemmi, M.; Carletti, A.; Macchioni, P.; Serretti, N.; Viegi, G.; Paggiaro, P.

1998-01-01

OBJECTIVES: To study the role of individual and occupational risk factors for asthma in furniture workers. METHODS: 296 workers were examined (258 men, 38 women) with a questionnaire of respiratory symptoms and diseases, baseline spirometry, bronchial provocative test with methacholine, and skin prick tests. Non-specific bronchial hyperreactivity was defined as when a provocative dose with a fall of 20% in forced expiratory volume in 1 second (PD20FEV1) was < 0.8 mg and atopy in the presence of at least one positive response to skin prick tests. Workers were subdivided into spray painters (exposed to low concentrations of diisocyanates and solvents), woodworkers (exposed to wood dusts), and assemblers (control group). RESULTS: The prevalences of attacks of shortness of breath with wheezing and dyspnoea were higher in spray painters (13.5% and 11.5% respectively) than in woodworkers (7.7% and 6.3%) or in assemblers (1.6% and 1.6%); prevalences of chronic cough, asthma, and rhinitis were also slightly but not significantly higher in spray painters and in woodworkers than in assemblers. The difference in the prevalence of respiratory symptoms among the job titles was due to the atopic subjects, who showed a higher prevalence of chronic cough, wheeze, shortness of breath with wheeze, dyspnoea, and asthma in spray painters than in the other groups. The prevalence of non-specific bronchial hyperreactivity in subjects who performed bronchial provocative tests was 17.7%, with no significant difference among groups. Asthma symptoms were significantly associated with non-specific bronchial hyperreactivity. Asthma-like symptoms plus non-specific bronchial hyperreactivity was found in 4% of assemblers, 10% of woodworkers, and 13.3% of spray painters (chi 2 = 2.6, NS). Multiple logistic analysis taking into account individual (smoke, atopy, age) and occupational (job titles) risk factors confirmed that spray painters had higher prevalence of chronic cough than assemblers, and a trend in increasing the prevalence of shortness of breath with wheeze, dyspnoea, and asthma. CONCLUSIONS: Painters in the furniture industry, particularly atopic subjects, are at higher risk of asthma-like symptoms than other job titles. In these workers asthma-like symptoms are more sensitive than non-specific bronchial hyperreactivity in detecting a negative effect of the occupational exposure.   PMID:9924457

Technical Subjects. Mathematics. Science. Curriculum RP-27.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto.

GRADES OR AGES: Grades 9-12. SUBJECT MATTER: Technical subjects and special mathematics and science courses for technical students. Technical subjects include air conditioning, auto mechanics, carpentry, drafting, applied electronics, masonry, painting, plumbing, service station operation, welding, and woodworking. ORGANIZATION AND PHYSICAL…

38. BACK CORNER SHOWING BAND SAW WITH WOODEN SAFETY GUARD, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. BACK CORNER SHOWING BAND SAW WITH WOODEN SAFETY GUARD, DISK AND VERTICAL SPINDLE SANDER, AND WOODWORKING LATHE-LOOKING SOUTHWEST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

Wood Technology: Techniques, Processes, and Products

ERIC Educational Resources Information Center

Oatman, Olan

1975-01-01

Seven areas of wood technology illustrates applicable techniques, processes, and products for an industrial arts woodworking curriculum. They are: wood lamination; PEG (polyethylene glycol) diffusion processes; wood flour and/or particle molding; production product of industry; WPC (wood-plastic-composition) process; residential construction; and…

Woodworking Technology.

ERIC Educational Resources Information Center

Kirk, Albert S.; And Others

1991-01-01

Three articles discuss the importance of wood processing to manufacturing and construction industries and the need for progressive change in the curriculum; the evolution of wood-based synthetic panel materials; and the technological advances in the computer control of machine tools and their incorporation into wood technology curricula. (JOW)

Education for Excellence

ERIC Educational Resources Information Center

Booth, Chester

1977-01-01

Describes projects of the Whitney, Texas, vocational agriculture students, exhibited at the Future Farmers of America Farm Mechanics Project Show (at the Heart o' Texas Fair in Waco) in several categories for livestock equipment, farm machinery, farm and yard conveniences, farm electrical projects, gates, and woodwork. (MF)

75 FR 41529 - Stimson Lumber Company, Clatskanie, OR; Notice of Negative Determination Regarding Application...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

..., Clatskanie, OR; Notice of Negative Determination Regarding Application for Reconsideration By application... of Machinists and Woodworkers requested administrative reconsideration of the Department's negative...- interpretation of facts or of the law justified reconsideration of the decision. The negative determination was...

20. Interior of assembly building (mold loft #2) used for ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. Interior of assembly building (mold loft #2) used for runabout production-woodworking shop. Note counter-weighted vertical sliding doors along wall to left to move materials and boats to other room. - Barbour Boat Works, Tryon Palace Drive, New Bern, Craven County, NC

Chronic sinusitis and woodworking as risk factors for cancer of the maxillary sinus in northeast Japan.

PubMed

Shimizu, H; Hozawa, J; Saito, H; Murai, K; Hirata, H; Takasaka, T; Togawa, K; Konno, A; Kimura, Y; Kikuchi, A

1989-01-01

In the period 1983 to 1985, 66 patients presented to six Japanese university hospitals with squamous cell carcinoma of the maxillary sinus. Using self-administered questionnaires, a case-control study was conducted to examine history of nasal diseases, occupational exposures, and other possible risk factors for this disease. For each patient, two controls were selected from the general population, matched to the patient by sex, age (+/- 5 years), and district of residence. A history of chronic sinusitis was associated with a 2.3-fold increase in risk (p = 0.05). A high relative risk was also observed in males with an occupational history of woodworking or joinery, particularly when these jobs involved sanding or lathing practices (RR = 7.5, p = 0.02). No association between cigarette smoking and maxillary sinus cancer was observed in this study and no evidence was found that indoor air pollution in the home is involved in cancer development.

A Guide for Equipping Industrial Arts Facilities.

ERIC Educational Resources Information Center

American Industrial Arts Association, Washington, DC. Equipment Guide Committee.

A guide for planning new and revising existing industrial arts facilities which gives a listing of tools and equipment recommended for each of the major areas of instruction (automotive and power mechanics, ceramics, drafting, electronics, elementary, general shop, graphic arts, metalworking, plastics, and woodworking). General descriptions and…

Women at Work.

ERIC Educational Resources Information Center

Valiant, Sharon

During the prehistoric era, most advances in society were developed by women. These advances included agriculture, building, weaving, basketry, pottery, woodworking, trading, and domesticating animals. Pottery and basketry allowed for the long-term storage of food and water and permitted humanity to stop living the nomadic life and begin the first…

Inedible Nuts and Non-Lightning Bolts

ERIC Educational Resources Information Center

Rynone, William

2010-01-01

In this article, the author provides detailed information on a wide variety of commonly used screws, bolts, and other fasteners. The information has been gathered in his engineering career and outside interests (maintenance on his car and airplane, and woodworking). The topic should be of interest to students and educators in many technical…

How-to-Do-It: An Interdisciplinary Approach to Forestry Education.

ERIC Educational Resources Information Center

Zipko, Stephen J.

1983-01-01

Describes a four- to six-week minicourse featuring topics from language arts, law, history, sociology, mathematics, art, and woodworking in addition to botany, zoology, genetics, ecology, and evolution. Student study is divided into five phases: tree-ring analysis; forest history; seedling competition; genetic improvement and cloning; and a…

Creativity--A Dynamic Approach to Industrial Education

ERIC Educational Resources Information Center

Markowitz, John, Jr.

1974-01-01

The author presents a number of unique programs and projects which have proved successful in one high school's woodworking and graphic arts classes in terms of motivating high student interest, growth in skills, good community relations--and a financial profit. The chief objective is self-discovery, the model is Outward Bound. (AJ)

Secondary School Design: Workshop Crafts.

ERIC Educational Resources Information Center

Department of Education and Science, London (England).

Design features are described for school shop facilities. Some general requirements common to most workshops are discussed; and specific design information is provided for general woodwork, general metalwork, and combined wood and metalwork facilities. The grouping of the workshop crafts and their relation to other parts of the school are also…

4. Historic American Buildings Survey PHOTOCOPY CA. 1916 OF FRENCH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. Historic American Buildings Survey PHOTOCOPY CA. 1916 OF FRENCH ROOM LOOKING AT NORTH END OF ROOM. WALLS COVERED IN SILK WITH HAND- EMBROIDERED APPLIQUES. NOTE CARVINGS AND MOLDINGS IN WHITE GUM WOODWORK. FLOORS ARE PARQUET. Original in Collections of Marian College - James A. Allison Mansion, 3200 Coldspring Road, Indianapolis, Marion County, IN

The Art and Craft of Science

ERIC Educational Resources Information Center

Root-Bernstein, Robert; Root-Bernstein, Michele

2013-01-01

Walter Alvarez, a doctor and physiologist of some renown, decided to send his scientifically talented son, Luis, to an arts and crafts school where Luis took industrial drawing and woodworking instead of calculus. Luis Alvarez won the Nobel Prize in physics in 1968. Einstein was certainly not a standout in his mathematics and physics classes. Yet…

Laminating and Bending; A Base Syllabus on Wood Technology.

ERIC Educational Resources Information Center

Eastern Kentucky Univ., Richmond.

Prepared by participants in the 1968 National Defense Education Act Institute on Wood Technology, this syllabus is one of a series of basic outlines designed to aid college level industrial arts woodworking instructors in improving and broadening the scope and content of their programs. The manual consists of a brief introduction followed by seven…

Development of a rooted cutting propagation method for Prunus serotina

Treesearch

P.M. Pijut; A.C. Espinosa

2005-01-01

Black cherry (Prunus serotina) is the only native Prunus species (southeastern Canada and throughout the eastern United States) that is of high commercial value for timber and sawlog production. Black cherry wood is highly valued in North America for cabinets, furniture, fine veneer, and architectural woodwork. Hardwood lumber mills are constantly...

5. Historic American Buildings Survey PHOTOCOPY CA. 1916 OF BREAKFAST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Historic American Buildings Survey PHOTOCOPY CA. 1916 OF BREAKFAST ROOM, LOOKING EAST. WHITE GUM WOODWORK CARRIES ROSE BRANCH DESIGN. NORTH WINDOWS GIVE VIEW OF LAKE; SOUTH WINDOWS OF ROLLING FRONT LAWN. FLOORS PARQUET. Original in Collections of Marian College - James A. Allison Mansion, 3200 Coldspring Road, Indianapolis, Marion County, IN

Strengthen Wood Education through a Comprehensive Approach

ERIC Educational Resources Information Center

Mative, John M.

2005-01-01

Wood education programs across the nation, at and below the secondary levels of education, have declined in enrollment in recent years. To many, wood education means only carpentry or woodworking. A systematic approach to the subject, as a part of a materials science course, can reverse the material's negative connotation and make wood education…

29 CFR Appendix B to Subpart I to... - Non-mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... work operations. In some cases a chin strap may be necessary to keep the helmet on an employee's head..., grinding machining, masonry work, woodworking, sawing, drilling, chiseling, powered fastening, riveting...

29 CFR Appendix B to Subpart I of... - Non-mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... work operations. In some cases a chin strap may be necessary to keep the helmet on an employee's head..., grinding machining, masonry work, woodworking, sawing, drilling, chiseling, powered fastening, riveting...

29 CFR Appendix B to Subpart I to... - Non-mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... work operations. In some cases a chin strap may be necessary to keep the helmet on an employee's head..., grinding machining, masonry work, woodworking, sawing, drilling, chiseling, powered fastening, riveting...

29 CFR Appendix B to Subpart I of... - Non-mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... work operations. In some cases a chin strap may be necessary to keep the helmet on an employee's head..., grinding machining, masonry work, woodworking, sawing, drilling, chiseling, powered fastening, riveting...

Vocational Exploration and Skill Building in Marine and Related Occupations. Final Report, 1979-1980.

ERIC Educational Resources Information Center

Schaefer, Larry; And Others

The first year of a project to train high school aged handicapped and/or disadvantaged youth for employment in marine and related trades was considered successful. Specific areas of training included motor mechanics, electrical, woodworking, refinishing, restoration, fiberglass work, and blueprint reading under the direction of skilled…

Adhesives for bonding wood to metal

Treesearch

H. W. Eickner; R. F. Blomquist

1964-01-01

During recent years considerable research and development work have been done on high-strength, durable adhesives for use in bonding metals. Much of this is also applicable for gluing wood to metal. The woodworking adhesives, such as animal, vegetable, casein, urea resin, phenol resin, and resorcinol resin, have not been found entirely suitable for this purpose. They...

29 CFR 1910.213 - Woodworking machinery requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... as to be free from sensible vibration when the largest size tool is mounted and run idle at full... lugs cast on the frame or with an equivalent means to limit the size of the saw blade that can be... in-running rolls at any point. The guard shall be constructed of heavy material, preferably metal...

29 CFR 1910.213 - Woodworking machinery requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... as to be free from sensible vibration when the largest size tool is mounted and run idle at full... lugs cast on the frame or with an equivalent means to limit the size of the saw blade that can be... in-running rolls at any point. The guard shall be constructed of heavy material, preferably metal...

29 CFR 1910.213 - Woodworking machinery requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... as to be free from sensible vibration when the largest size tool is mounted and run idle at full... lugs cast on the frame or with an equivalent means to limit the size of the saw blade that can be... in-running rolls at any point. The guard shall be constructed of heavy material, preferably metal...

29 CFR 1910.213 - Woodworking machinery requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... as to be free from sensible vibration when the largest size tool is mounted and run idle at full... lugs cast on the frame or with an equivalent means to limit the size of the saw blade that can be... in-running rolls at any point. The guard shall be constructed of heavy material, preferably metal...

29 CFR 1910.213 - Woodworking machinery requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... as to be free from sensible vibration when the largest size tool is mounted and run idle at full... lugs cast on the frame or with an equivalent means to limit the size of the saw blade that can be... in-running rolls at any point. The guard shall be constructed of heavy material, preferably metal...

Challenge Students' Skills and Creativity with Student-Directed Projects

ERIC Educational Resources Information Center

Kraft, Thomas E.

2009-01-01

Student-directed projects motivate and educate the students, inform the public--and produce some very handsome furniture that may well become treasured family heirlooms that will live beyond their makers. In this article, the author describes how he adopted a student-directed approach in his Fine Woodworking course by setting up a two-project…

Wood Substitutes; A Base Syllabus on Wood Technology.

ERIC Educational Resources Information Center

Eastern Kentucky Univ., Richmond.

This curriculum guide is for use by college instructors concerned with expanding traditional woodworking programs. It was developed in a National Defense Education Act summer institute and is based on an outline provided by members of a previous institute. The content concerns wood substitutes which are made to resemble wood and are often used…

Model Program: Seymour High School, Indiana

ERIC Educational Resources Information Center

Sexton, Bob

2008-01-01

This article describes how Bob Sexton started changing the way technology was taught at Seymour High School more than 12 years ago. With the change came complaints and concerns from parents who said their children should be learning woodworking, not manufacturing. Through hard work and determination, Sexton proved the need for a new way of…

An Exercise in Exciting Visuals: Building and Displaying on a Foreign Language Kiosk.

ERIC Educational Resources Information Center

Ruling, Karl; Lide, Francis

Detailed, illustrated instructions are given for construction and decoration of an indoor foreign language kiosk to promote interest in foreign languages among students and teachers. The kiosk can be constructed in a home shop or possibly by a college theater department, high school woodworking department, or institutional physical plant. Once…

Housing's impact on wood products sales

Treesearch

Matt Bumgardner; Urs Buehlmann; Karen Koenig

2017-01-01

What are the market conditions for woodworkers involved in construction-based sectors and what investments are planned to improve capabilities in the current business environment? For a fifth straight year, construction-based mar­kets continued their growth trends in 2016, as U.S. spending on single family housing, multi-family housing, and nonresidential construction...

Native American Career Education Unit. From Idea to Product.

ERIC Educational Resources Information Center

Far West Lab. for Educational Research and Development, San Francisco, CA.

One of twelve instructional units in the Native American Career Education (NACE) program, this unit is intended to help Indian junior high school students understand the steps involved in making a product. Focus is on the subject areas of economics, lumber and furniture industries, and woodworking. The first two activities concern the nature of…

Photocopy of drawing located at National Archives, San Bruno, California ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing located at National Archives, San Bruno, California (Navy # 106-A-6). Plan proposed for boat shop building No. 106 US Navy Yard Mare Island, Cal details of mortar woodwork; February, 1902. - Mare Island Naval Shipyard, Boat Shop, California Avenue, west side between Ninth & Tenth Streets, Vallejo, Solano County, CA

A Supplementary Program for Environmental Education, Industrial Arts, Grade 7-12.

ERIC Educational Resources Information Center

Warpinski, Robert

Presented in this teacher's guide for grades 7-12 are lesson plans and ideas for integrating industrial arts (drafting, woodworking, and metals) and environmental education. Each lesson originates with a fundamental concept pertaining to the environment and states, in addition, its discipline area, subject area, and problem orientation. Following…

CT assessment of woodworkers' nasal adenocarcinomas confirms the origin in the olfactory cleft.

PubMed

Georgel, T; Jankowski, R; Henrot, P; Baumann, C; Kacha, S; Grignon, B; Toussaint, B; Graff, P; Kaminsky, M C; Geoffrois, L; Vignaud, J M

2009-08-01

Endoscopic endonasal surgery let us observe that woodworkers' nasal adenocarcinomas originate in the olfactory cleft. Our aim was the identification of CT imaging features that corroborate the olfactory cleft as the site of origin for woodworkers' adenocarcinoma. We designed a retrospective study to compare CT scans of 27 unilateral olfactory cleft adenocarcinomas with 30 cases of nasosinusal polyposis (NSP) and 33 healthy sinus controls. Enlargement of the olfactory cleft, lateralization of the ethmoidal turbinate wall, and contralateral bulging of the nasal septum were measured on coronal scans passing through crista galli and posterior half of both ocular globes. Comparisons have been performed by using analysis of variance and the Bonferroni procedure. The nasal septum was significantly bulging across the midline in adenocarcinoma (4.6 +/- 3 mm; range, -0.1-13.7 mm) compared with NSP (0.7 +/- 1 mm; range, -2.1-2.3 mm) or healthy sinus controls (0.5 +/- 1 mm; range, -1.2-2 mm) (P < .001). The olfactory cleft was significantly wider in adenocarcinoma (15.1 +/- 4.5 mm; range, 8.6-25.7 mm) than in NSP (3.6 +/- 0.4 mm; range, 2.8-4.6 mm) or healthy sinus controls (3.3 +/- 0.7 mm; range, 1.4-4.6 mm). The ethmoidal labyrinth width was significantly smaller on the pathologic side in adenocarcinoma (7.2 +/- 2.7 mm; range, 3.2-14.2 mm) than in the control groups (P < .001). Whereas the angle between the conchal lamina and vertical midline was close to zero degrees in NSP (0.03 +/- 2.25 degrees ; range, -5 degrees -3 degrees ) and healthy sinus controls (0.45 +/- 2.13 degrees , range, -5 degrees -5 degrees ), it reached 39.76 +/- 13.83 degrees (P < .001) in adenocarcinoma. Radiologists should suspect nasal adenocarcinoma on sinus CT scans showing a unilateral expanding opacity of the olfactory cavity.

Tools. Unit 9: A Core Curriculum of Related Instruction for Apprentices.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Occupational and Career Curriculum Development.

The tool handling unit is presented to assist apprentices to acquire a general knowledge on the use of various basic tools. The unit consists of seven modules: (1) introduction to hand tools and small power tools; (2) measuring tools: layout and measuring tools for woodworking; (3) measuring tools: feeler gauge, micrometer, and torque wrench; (4)…

Recent advances in forest products research and development

Treesearch

Joseph E. Jakes

2016-01-01

Wood has always played an integral role in meeting our materials needs. The earliest evidence of woodworking dates back 1.5 million years to the modern human ancestor Homo erectus.1 Many characteristics that made wood a favorable material for our ancestors—relative abundance, ease of forming and shaping, exceptional strength-toweight ratio,...

Otto Salomon in Nääs and His First Icelandic Students in Nordic Sloyd

ERIC Educational Resources Information Center

Thorsteinsson, Gisli; Ólafsson, Brynjar

2014-01-01

Pedagogically aimed craft education was established around the same time as the school-based system of formative education, under the term Sloyd. This refers to a pedagogical system of manual training that promotes general child development, through the acquisition of the technical skills employed in woodwork, metalwork, sewing, knitting and the…

Measure for Measure: A Guide to Metrication for Workshop Crafts and Technical Studies.

ERIC Educational Resources Information Center

Schools Council, London (England).

This booklet is designed to help teachers of the industrial arts in Great Britain during the changeover to metric units which is due to be substantially completed during the period 1970-1975. General suggestions are given for adapting equipment in metalwork and engineering and woodwork and technical drawing by adding some metric equipment…

Toy Truck Project Teaches Woodworking and Manufacturing Technologies

ERIC Educational Resources Information Center

Hawkins, Harry M.

2005-01-01

Toys often work well for project activities. They appeal directly to youngsters, and older students like to make things that they can give to a younger sibling or relative. This article describes how to construct a toy truck. This project takes advantage of common 2 x 4 lumber stock to produce an economical toy. Of course, one could substitute…

No Boys Allowed! All-Girl Class Gets Students Hooked on TE

ERIC Educational Resources Information Center

Peckham, Susanne

2009-01-01

Increasing the number of girls who enroll in their elective courses is a perennial challenge for many technology educators. Yet one educator has found a very successful approach to drawing in female students: a girls-only class called Woodworking for Girls. This paper presents a brief description of the course. It also offers suggestions for…

Alternative Fuels Data Center: Local Businesses Get Creative to Offer

Science.gov Websites

employees receive free charging, save money on gas and reduce their carbon footprints. When potential Workplace Charging " Being a business, we're interested in saving money and [workplace charging] has businesses look to save money while lowering their carbon footprint, but Hollywood Woodwork has found a

Muscles, Morals and Mind: Craft Apprenticeship and the Formation of Person

ERIC Educational Resources Information Center

Marchand, Trevor H. J.

2008-01-01

The paper considers apprenticeship as a model of education that both teaches technical skills and provides the grounding for personal formation. The research presented is based on long-term anthropological fieldwork with minaret builders in Yemen, mud masons in Mali and fine-woodwork trainees in London. These case studies of on-site learning and…

PROMISING PRACTICES IN SUMMER SCHOOLS SERVING THE CHILDREN OF SEASONAL AGRICULTURAL WORKERS, 1963.

ERIC Educational Resources Information Center

HEFFERNAN, HELEN; AND OTHERS

SPECIAL FEATURES OF FIVE SUMMER SCHOOL PROGRAMS FOR CHILDREN OF MIGRANT WORKERS WERE PRESENTED. THE CERES ELEMENTARY SCHOOL DISTRICT GAVE JUNIOR HIGH SCHOOL LEVEL WOODWORKING CLASSES TO FIFTH- AND SIXTH-GRADE GIRLS. INSTRUCTION IN COOKING AND SEWING WAS ENTHUSIASTICALLY RECEIVED BY THIRD- AND FOURTH-GRADE GIRLS BUT DID NOT APPEAL TO OLDER GIRLS. A…

An Evaluation of the Preparation of Industrial Arts Graduates of South Dakota State University.

ERIC Educational Resources Information Center

Gifford, Kenneth Keith, Jr.

Questionnaires were used to gather data from 1955-1969 industrial arts graduates and state public secondary school administrators in order to evaluate the undergraduate industrial arts program at South Dakota State University. Among the findings were: (1) 53 percent of the graduates are teaching, (2) Prevalent teaching areas are woodworking,…

Housing and the wood industry, trends & market conditions

Treesearch

Urs Buehlmann; Matt Bumgardner; Al Schuler; K. Koenig

2011-01-01

Housing markets continue to have major impacts on the secondary wood industry. So, what are the steps being taken by wood products manufacturers in order to stay viable? As a follow-up to last year's article, "Housing Market's Impact on the Secondary Woodworking Industry" (Wood & Wood Products, July 2010), the focus of this year's study was...

Meeting the Solid Wood Needs of the Furniture and Cabinet Industries: Standard-Size Hardwood Blanks

Treesearch

Philip A. Araman; Charles J Gatchell; Hugh W. Reynolds

1982-01-01

Standard-size, kiln-dried hardwood blanks (panels) of specified lengths, widths, thicknesses, and qualities can be used instead of lumber to produce rough dimension furniture parts. Standard sizes were determined by analyzing thousands of part requirements from 20 furniture and 12 kitchen cabinet companies. The International Woodworking Machinery and Furniture Supply...

Oregon Cabinetmakers and Woodworkers Apprenticeship Training Curriculum. Instructor's Manual.

ERIC Educational Resources Information Center

Guilar, Joshua R. D.

This guide is intended for use in providing the classroom portion of training for apprentices in the cabinetmaking and millwork trades. The materials focus on guiding teams of apprentices through the completion of a credenza with step-back hutch that is to be made in the traditional, colonial/country, and contemporary furniture styles. The guide…

An investigation of hardwood plywood markets. Part 2. Fixture manufacturers

Treesearch

Craig L. Forbes; Larry G. Jahn; Philip A. Araman

2001-01-01

This is the second part of a two-part study investigating markets for hardwood plywood. Part 1 dealt with architectural woodworkers. North American fixture manufacturers were surveyed to better understand the structure and use of wood-based panels in the industry. A questionnaire was mailed to a sample of U.S. and Canadian fixture manufacturers. The sample consisted of...

Consumer preference study of characteristics of Hawaiian koa wood bowls

Treesearch

Eini C Lowell; Katherine Wilson; Jan Wiedenbeck; Catherine Chan; J. B. Friday; Nicole Evans

2017-01-01

Koa (Acacia koa A. Gray), a species endemic to the Hawaiian Islands, has ecological, cultural, and economic significance. Its wood is prized globally but today, most woodworkers only use koa wood from dead and dying old-growth trees. The general perception of wood from young-growth koa is that it lacks the color and figure of old-growth wood and is...

Impacts of construction markets on firm performance and behaviors in the secondary woodworking industry, 2010-2013

Treesearch

Matthew S. Bumgardner; Urs Buehlmann; Albert T. Schuler; Karen M. Koenig

2014-01-01

Despite the severe downturn in the housing market that began in 2007, construction-related uses collectively remain the largest source of demand for appearance-grade hardwood lumber in the United States. Therefore, industry practitioners and researchers alike maintain an interest in housing and construction trends. This study investigated market conditions from the...

Adhesive Penetration of Wood and Its Effect on Bond Strength

Treesearch

Charles R. Frihart

2016-01-01

Woodworkers know that wood is porous in that adhesive flows into lumens for a mechanical interlock (1) and that wood absorbs water, allowing the use of water-borne adhesives. However, the anatomical aspects of wood that lend to its porosity are much more complicated and have a greater influence on adhesive performance than is normallyrealized or discussed. This...

Fort Bliss Standards for the Treatment of Historic Buildings

DTIC Science & Technology

2008-05-01

visual disparity between the two materials. Typical historical uses for sandstone included • Urban row houses, commercial buildings and churches...migration within walls due to interior condensation and humidity, va- por drive problems caused by furnace, bathroom and kitchen vents, and rising damp...Replacing Deteriorated Woodwork • Historic Exteriors: Preserving Wood • Preservation Brief #31: Mothballing Historic Buildings Pests can be

Building Peace Poles: Inexpensive Woodworking Project Great for Middle and High School Students

ERIC Educational Resources Information Center

Roccanova, John

2013-01-01

The World Peace Prayer Society (WPPS) has at its core the message: "May peace prevail on Earth." This axiom appears on the roughly 200,000 Peace Poles that are planted at private residences, schools, in parks, and at other public places worldwide including at the Pentagon, the Pyramids in Egypt, and on Mt. Kilimanjaro, the highest free-standing…

Remilling of salvaged wood siding coated with lead-based paint. Part 2, Wood product yield

Treesearch

John J. Janowiak; Robert H. Falk; Brian W. Beakler; Richard G. Lampo; Thomas R. Napier

2005-01-01

Many U.S. military buildings being targeted for removal contain large quantities of potentially reusable wood materials. In this study, we evaluated approximately 2180 m (7,152 ft) of painted Douglas-fir siding salvaged from U.S. Army barracks. Utilizing a conventional woodworking molder, we evaluated the feasibility of producing several standardized wood product...

Fourth Grade Factory--An Integrated, Collaborative Unit in Manufacturing and Economics--Make It, Take It.

ERIC Educational Resources Information Center

Bliss, Clifford; Giles, Bob

This unit for fourth grade and high school includes elements of careers, economics and free enterprise for fourth graders and elements of problem solving and design, manufacturing, drafting, and woodworking for high school students. The unit is taught in both the fourth grade and the high school classrooms. The unit involves planning, designing,…

Ritchey, George Willis (1864-1945)

NASA Astrophysics Data System (ADS)

Murdin, P.

2000-11-01

At first a furniture-maker and woodworker, became an instrument-maker and especially an optician when he obtained part-time work at the observatory of the University of Cincinnati. Met GEORGE ELLERY HALE in Chicago and volunteered to assist him, preparing photographic plates, learning to use the camera to photograph stars and nebulae. Became a full time optician and supervisor of the instrument s...

Numerical Control/Computer Aided Manufacturing (NC/CAM), A Descom Study

DTIC Science & Technology

1979-07-01

CAM machines operate directly from computers, but most get instructions in the form of punched tape. The applications of NC/CAM are virtually...Although most NC/CAM equipment is metal working, its applications include electronics manufacturing, glass making, food processing, materiel handling...drafting, woodworking, plastics and inspection, just to name a few. Numerical control, like most technologies, is an advancing and evolutionary process

Preparing Refugees for Skilled Employment: Methods and Materials for Coordinated Instruction in Vocational Skills, English as a Second Language, Mathematics, Work Orientation and Independent Job Search.

ERIC Educational Resources Information Center

Jewish Employment and Vocational Service, Philadelphia, PA. Center for Career Services.

This manual serves as a guide for the evaluation, design, administration, and teaching of vocational training programs for limited-English-proficient (LEP) students, based on a coordinated vocational skills curriculum developed for refugee clients. The vocational focus of the program is woodworking and skilled assembly, but the principles of…

How small firms contrast with large firms regarding perceptions, practices, and needs in the U.S

Treesearch

Urs Buehlmann; Matthew Bumgardner; Michael Sperber

2013-01-01

As many larger secondary woodworking firms have moved production offshore and been adversely impacted by the recent housing downturn, smaller firms have become important to driving U.S. hardwood demand. This study compared and contrasted small and large firms on a number of factors to help determine the unique characteristics of small firms and to provide insights into...

The Special Education Prevocational Level Manual: Project V.I.E.W. (Vocational Instruction and Experience Workshop). Assembly Skills, Woodworking Skills, Graphic Arts Skills, Measurement Skills, Plastic Skills, Horticulture Skills.

ERIC Educational Resources Information Center

Northern Valley Regional High School District, Closter, NJ.

Designed as a guideline for teachers and child study teams in a prevocational program for handicapped students, the manual presents goals, objectives and sample activities including the elements of career awareness, prevocational instruction, job simulation, and readiness for formal vocational instruction. Six sections are addressed: (1) assembly…

Chemical exposures and respiratory cancer among Finnish woodworkers.

PubMed Central

Kauppinen, T P; Partanen, T J; Hernberg, S G; Nickels, J I; Luukkonen, R A; Hakulinen, T R; Pukkala, E I

1993-01-01

A case-control study of respiratory cancer, nested within a cohort of male woodworkers, was updated in Finland. The update extended the initial follow up of 3805 workers from 19 plants to 7307 workers from 35 plants. Each case of respiratory cancer (n = 136) diagnosed between 1957 and 1982 within the cohort was matched by year of birth with three controls (n = 408) from the cohort. Chemical exposures were assessed for the cases and the controls by a plant and period specific job exposure matrix. An excess of respiratory cancer was associated with phenol. Concomitant exposures to several other agents occurred as well, however, and no exposure-response relation for phenol was seen. An excess risk and an increasing exposure-response relation were found for engine exhaust from petrol and diesel driven factory trucks. The excess risk associated with pesticides was lower than in our previous study, an indication of qualitative and quantitative differences in exposure between the initial and augmented cohorts. Slightly increased risks were found for terpenes and mould spores, which may be due to chance although the contribution of occupational exposure cannot be ruled out. Exposure to wood dust, mainly from pine, spruce and birch, at a level of about 1 mg/m3, was not associated with lung cancer, upper respiratory cancer, or adenocarcinoma of the lung. PMID:8435346

A review of nasal cancer in furniture manufacturing and woodworking in North Carolina, the United States, and other countries.

PubMed

Imbus, H R; Dyson, W L

1987-09-01

Nasal adenocarcinoma in the High Wycombe furniture industry of England during 1956-1965 had an annual incidence of 500 to 1,000 times greater than that of the general population. Excesses of nasal cancer have also been described in France, Australia, Denmark, Finland, Italy, and Holland. Interestingly, one limited study in Canada revealed no excess, whereas a more recent one showed a slight excess. In contrast to the strikingly large excesses of nasal adenocarcinoma in other countries, there has never been any evidence of similarly large excesses in the US woodworking and furniture industry. Modern manufacturing conditions may not present the same degree of risk of developing nasal cancer as was present in the English furniture manufacturing industry. The incidence of nasal cancer associated with furniture manufacturing in the United States is examined in considerable detail in North Carolina, the leading furniture manufacturing state. Furniture manufacturing in the state began around 1890 and has grown steadily since. Utilizing statistics available from the North Carolina Department of Vital Statistics, the absolute mortality of nasal cancer in North Carolina was calculated from 1964 to 1977. The average mortality was approximately 3.5 times greater in the furniture manufacturing industry than in the general population.(ABSTRACT TRUNCATED AT 250 WORDS)

Classification scheme and prevention measures for caught-in-between occupational fatalities.

PubMed

Chi, Chia-Fen; Lin, Syuan-Zih

2018-04-01

The current study analyzed 312 caught-in-between fatalities caused by machinery and vehicles. A comprehensive and mutually exclusive coding scheme was developed to analyze and code each caught-in-between fatality in terms of age, gender, experience of the victim, type of industry, source of injury, and causes for these accidents. Boolean algebra analysis was applied on these 312 caught-in-between fatalities to derive minimal cut set (MCS) causes associated with each source of injury. Eventually, contributing factors and common accident patterns associated with (1) special process machinery including textile, printing, packaging machinery, (2) metal, woodworking, and special material machinery, (3) conveyor, (4) vehicle, (5) crane, (6) construction machinery, and (7) elevator can be divided into three major groups through Boolean algebra and MCS analysis. The MCS causes associated with conveyor share the same primary causes as those of the special process machinery including textile, printing, packaging and metal, woodworking, and special material machinery. These fatalities can be eliminated by focusing on the prevention measures associated with lack of safeguards, working on a running machine or process, unintentional activation, unsafe posture or position, unsafe clothing, and defective safeguards. Other precise and effective intervention can be developed based on the identified groups of accident causes associated with each source of injury. Copyright © 2017 Elsevier Ltd. All rights reserved.

Design for Production Manual. Volume 2. Design/Production Integration

DTIC Science & Technology

1985-12-01

woodworking equipment such as circular saw, cross cut saw, planer / thicknesser and sander. There is considerable use of hand tools in the shop. Joinery inclucies...PROGRAM BY SOCIETY OF NAVAL ARCHITECTS AND MARINE ENGINEERS SHIP PRODUCTION COMMITTEE PANEL SP- 4 DESIGN PRODUCTION INTEGRATION CONTRACT DTMA91-82-C...DEC 1985 2. REPORT TYPE N/A 3. DATES COVERED - 4 . TITLE AND SUBTITLE Design for Production Manual Volume 2 of 3 Design/Production

Consumable and Refundable Supplies Items for Production Agriculture Mechanics Laboratories as Influenced by Selected Characteristics of Vocational Agriculture Program and Teacher. Final Report.

ERIC Educational Resources Information Center

Gerstenlauer, David L.

This study was conducted to develop a list of basic consumable and refundable supplies to be used in a secondary agricultural production mechanics laboratory program in Pennsylvania. A total of 72 surveys were sent to selected teachers: 24 in the area of woodworking, 24 in the area of metal working, and 24 covering all other areas of agricultural…

Targeted Recruitment for Naval Special Warfare (SEALS): Connecting NSW to Recruit Pools with Social Movement Theory

DTIC Science & Technology

2012-06-01

water polo, triathlon, lacrosse, boxing rugby , and swimming as well as those participating in activities such as mountain biking, woodworking...participated in any of the following sports: water polo, triathlon, lacrosse, boxing rugby , and swimming. Also controlled for is the level of a...strong sport attribute. The sports within this strong sport variable are water polo, triathlon, lacrosse, boxing, rugby , and swimming. Each of these

A Preliminary to War: The 1st Aero Squadron and the Mexican Punitive Expedition of 1916

DTIC Science & Technology

2003-01-01

In the pitch dark, his men achieved surprise, penetrated to the center of town, and burned several buildings. The 13th Cavalry reacted quickly...Expansion had come at a price , however. Airplane construction depended upon highly skilled woodworkers and specially selected materials. It was, in fact...barely skimmed over. Kilner immediately suffered engine trouble, circled, and returned to the field. The other seven airplanes successfully fol- lowed

Airborne endotoxin in woodworking (joinery) shops.

PubMed

Harper, Martin; Andrew, Michael E

2006-01-01

Symptoms such as shortness of breath and cough have been noted in woodworking facilities even where wood dust itself is well-controlled. Suspicion has fallen on other possible contaminants in the workplace atmosphere, including bacterial endotoxin. A few studies have indicated potentially high endotoxin exposure with exposure to fresh wood in sawmills and in the production of fiberboard and chipboard, but fewer studies have been carried out on exposure to endotoxin in dry wood work, for example in joineries. A study of the endotoxin content of airborne wood dust samples from US woodworking facilities is presented, from the re-analysis of samples which previously had been taken to establish mass collection relationships between the IOM sampler, the closed-face 37 mm plastic cassette (CFC) sampler and the Button sampler. Endotoxin was strongly correlated with total dust, but the endotoxin content of a few fresh wood samples was found to be up to ten times higher per unit of wood dust than for dried-wood samples, and this difference was significant. No long-term time-weighted average sample exceeded the recommended limit value of 50 EU m(-3) (EU, endotoxin units)used in the Netherlands, although a number of the IOM samples came close (seven samples or 44% exceeded 20 EU m(-3)) and one short-term (48 minute) sample registered a high value of 73 EU m(-3). The geometric mean concentration from the IOM samples (11 EU m(-3)) is within the range of geometric means found from Australian joineries (3.7-60, combined: 24 EU m(-3)). In contrast, the corresponding values from the CFC (3.6 EU m(-3)), and the Button sampler (2.1 EU m(-3)) were much lower and no samples exceeded 20 EU m(-3). Endotoxin is likely only to be a significant problem in working with dried woods when associated with very high dust levels, where the wood dust itself is likely to be a cause for concern. The results from the few samples in this study where fresh wood was being worked were similar to results from other studies involving fresh woods. The agreement between these studies is encouraging given the difficulties of endotoxin analysis and the wide variation often expected between different laboratories.

A Comparative Study of the Demographic Profiles of Prisoners Confined in the Federal and U.S. Army Correctional Systems

DTIC Science & Technology

1990-07-18

training programs ranging from shoe repair, woodworking, furniture repair, auto repair, barbering, horticulture and farming (Cavanaugh; Diamond, 1989...food preparation, and horticulture . The I number and quality of programs have improved over the years to include the use of computer-assisted...USDB celebrates 115th birthday sunday. The Lamp. pp. 14-15. Durick, M.D. (1990). The USDB reality therapy for student officers. Military Police Journal

Exposure to biohazards in wood dust: bacteria, fungi, endotoxins, and (1-->3)-beta-D-glucans.

PubMed

Alwis, K U; Mandryk, J; Hocking, A D

1999-09-01

Personal exposure to fungi, bacteria, endotoxin, and (1-->3)-beta-D-glucan was determined at different woodworking sites--logging sites, sawmills, woodchipping sites, and joineries. Exposure levels to fungi at logging sites and sawmills were in the range of 10(3)-10(4) cfu/m3, at the woodchipping mill, 10(3)-10(5) cfu/m3, and at joineries, 10(2)-10(4) cfu/m3. Although mean endotoxin levels were lower than the suggested threshold value of 20 ng/m3, some personal exposures at sawmills and a joinery exceeded the standard. The geometric mean personal (1-->3)-beta-D-glucan exposure level at the woodchipping mill was 2.32 ng/m3, at sawmills, 1.37 ng/m3, at logging sites, 2.02 ng/m3, and at joineries, 0.43 ng/m3. Highly significant associations were found between mean personal inhalable endotoxin exposures and Gram-negative bacteria levels (p < 0.0001), and mean personal inhalable (1-->3)-beta-D-glucan exposures and fungi levels (p = 0.0003). The prevalence of cough, phlegm, chronic bronchitis, nasal symptoms, frequent headaches, and eye and throat irritations was significantly higher among woodworkers than controls. Dose-response relationships were found between personal exposures and work-related symptoms among joinery workers and sawmill and chip mill workers.

Configuration of management accounting information system for multi-stage manufacturing

NASA Astrophysics Data System (ADS)

Mkrtychev, S. V.; Ochepovsky, A. V.; Enik, O. A.

2018-05-01

The article presents an approach to configuration of a management accounting information system (MAIS) that provides automated calculations and the registration of normative production losses in multi-stage manufacturing. The use of MAIS with the proposed configuration at the enterprises of textile and woodworking industries made it possible to increase the accuracy of calculations for normative production losses and to organize accounting thereof with the reference to individual stages of the technological process. Thus, high efficiency of multi-stage manufacturing control is achieved.

Noise Hazard Evaluation Sound Level Data on Noise Sources

DTIC Science & Technology

1975-01-01

Saw, Root Woodworking 43-20-J 102 16. Construction Saw, DeWalt Industrial 2185A 96 17. Cross-Cut Sw, Automatic 1-H 94 18, Cross-Cut Saw, DeWalt 3561...Saw, GM Diehr 750 92 53. Rip Saw, Wabach Industrial 750 97 59. Rip Saw, Yates American B. 102 60. Router: Black & Decker 118 61. Ruuter, Rockwell 150B...13. Sander, Disk, National-Detroit Dual Action 100 14. Stapler , Senco Mll 94* 15. Stapling Gun, Bostich II 105* 16. Stapling Gun, Bostich III 104* 17

MRP (materiel requirements planning) II education: a team-building experience.

PubMed

Iemmolo, G R

1994-05-01

Conestoga Wood Specialties, a leader in the woodworking industry, is constantly striving for continuous improvement in manufacturing and service. Recently, the company embarked on a major MRP II education effort that served as a framework for team building. This team building concept has carried over into other aspects related to the business, such as the formalization of the sales and operations planning meeting. At Conestoga Wood, it is recognized that successful team building is necessary to achieve and maintain world-class performance.

Hodgkin's disease, work, and the environment. A review.

PubMed

McCunney, R J

1999-01-01

Hodgkin's disease (HD), a lymphoma with an annual incidence in the United States of approximately 7500 cases, primarily affects the lymph nodes, spleen, and liver. The point of this article is to critically review the literature regarding the purported relationships between HD, certain occupations, and exposure to chemical agents. Attention will also be focused on recent advances in molecular genetics in the etiology of this ailment. A MEDLINE search was conducted to assess case-control and mortality evaluations that investigated links between HD and certain occupations and exposure to designated hazards. A review of citations in the Silver Platter Occupational and Environmental Medicine CD-ROM database was also conducted to ensure that all pertinent reports were obtained. Of the industries evaluated, woodworking showed the most consistent link between an increased risk of HD (relative risk, 1.8 to 7.2), but not all studies conducted showed positive associations. Although certain chemicals (ie, chlorophenols, pesticides) were reported as risks, no chemical was consistently and unambiguously linked with HD. Recent investigative work, however, points to a major etiological role for the Epstein-Barr virus (EBV), genetic fragments of which have been noted in Reed-Sternberg cells, the classic malignant cells of HD. The occupation most consistently associated with HD appears to be woodworking, although no specific chemical has been consistently linked with this lymphoma. The most persuasive evidence regarding the cause of HD arises from recent studies, including epidemiological, clinical, and genetic studies, that point to a major role by the EBV.

Longitudinal lung function decline and wood dust exposure in the furniture industry.

PubMed

Jacobsen, G; Schlünssen, V; Schaumburg, I; Taudorf, E; Sigsgaard, T

2008-02-01

The aim of the present study was to investigate the relationship between change in lung function and cumulative exposure to wood dust. In total, 1,112 woodworkers (927 males, 185 females) and 235 reference workers (104 males, 185 females) participated in a 6-yr longitudinal study. Forced expiratory volume in one second (FEV(1)), forced vital capacity (FVC), height and weight were measured, and questionnaire data on respiratory symptoms, wood dust exposure and smoking habits were collected. Cumulative inhalable wood dust exposure was assessed using a study-specific job exposure matrix and exposure time. The median (range) for cumulative wood dust exposure was 3.75 (0-7.55) mg x year x m(-3). A dose-response relationship between cumulative wood dust exposure and percent annual decrease in FEV(1) was suggested for female workers. This was confirmed in a linear regression model adjusted for confounders, including smoking, height and age. An additional difference of -14.50 mL x yr(-1) and -27.97 mL x yr(-1) was revealed for females exposed to 3.75-4.71 mg x yr x m(-3) or to >4.71 mg x yr x m(-3), respectively, compared with non-/low-exposed females. For females, a positive trend between wood dust exposure and the cumulative incidence proportion of FEV(1)/FVC <70% was suggested. In conclusion, in the present low-exposed cohort, female woodworkers had an accelerated decline in lung function, which may be clinically relevant.

Symptoms, airway responsiveness, and exposure to dust in beech and oak wood workers

PubMed Central

Bohadana, A.; Massin, N.; Wild, P.; Toamain, J.; Engel, S.; Goutet, P.

2000-01-01

OBJECTIVES—To investigate the relation between levels of cumulative exposure to wood dust and respiratory symptoms and the occurrence of bronchial hyperresponsiveness among beech and oak workers.
METHODS—114 Male woodworkers from five furniture factories and 13 male unexposed controls were examined. The unexposed control group was supplemented by 200 male historical controls. Statistical analyses were performed excluding and including the historical controls. Dust concentration was measured by personal sampling methods. Cumulative exposure to dust was calculated for each woodworker by multiplying the duration of the work by the intensity of exposure (years.mg/m3). Bronchial hyperresponsiveness was assessed by the methacholine bronchial challenge test. Subjects were labelled methacholine bronchial challenge positive if forced expiratory volume in 1 second (FEV1) fell by ⩾20%. The linear dose-response slope was calculated as the last dose divided by the total dose given.
RESULTS—443 Dust samples were collected. The median cumulative exposure to dust was 110 years.mg/m3 with lower and upper quartiles at 70 and 160 years.mg/m3 Overall, no declines in FEV1 and forced vital capacity (FVC) were found with increasing exposures. A dose-response relation was found between intensity of exposure on the one hand, and sore throat, increased prevalence of positive methacholine bronchial challenge tests, and steeper dose-response slope, on the other.
CONCLUSION—Exposure to oak and beech dust may lead to the development of sore throat and bronchial hyperresponsiveness.


Keywords: bronchial hyperresponsiveness; wood dust; beech; oak PMID:10810114

Insurance Expansion and the Utilization of Inpatient Surgery: Evidence for a "Woodwork" Effect?

PubMed

Ellimoottil, Chandy; Miller, Sarah; Davis, Matthew; Miller, David C

2015-12-01

The impact of insurance expansion on the currently insured population is largely unknown. We examine rates of elective surgery in previously insured individuals before and after Massachusetts health care reform. Using the State Inpatient Databases for Massachusetts and 2 control states (New York and New Jersey) that did not expand coverage, we identified patients aged 69 and older who underwent surgery from January 1, 2003, through December 31, 2010. We studied 5 elective operations (knee and hip replacement, transurethral resection of prostate, inguinal hernia repair, back surgery). We examined statewide utilization rates before and after implementation of health care reform, using a difference-in-differences technique to adjust for secular trends. We also performed subgroup analyses according to race and income strata. We observed no increase in the overall rate of selected discretionary inpatient surgeries in Massachusetts versus control states for the entire population (-1.4%, P = .41), as well as among the white (-1.6%, P = .43) and low-income (-2.2%, P = .26) subgroups. We did, however, find evidence for a woodwork effect in the subgroup of nonwhite elderly patients, among whom the rate of these procedures increased by 20.5% (P = .001). Among nonwhites, the overall result reflected increased utilization of all 5 individual procedures, with statistically significant changes for knee replacement (18%, P < .01), back surgery (18%, P = .05), transurethral resection of the prostate (28%, P = .05), and hernia repair (71%, P = .03). Our findings suggest that national insurance expansion may increase the use of elective surgery among subgroups of previously insured patients. © The Author(s) 2015.

TRENDS IN MORTALITY FROM OCCUPATIONAL HAZARDS AMONG MEN IN ENGLAND AND WALES DURING 1979-2010

PubMed Central

Harris, E Clare; Palmer, Keith T; Cox, Vanessa; Darnton, Andrew; Osman, John; Coggon, David

2016-01-01

Objectives To monitor the impact of health and safety provisions and inform future preventive strategies, we investigated trends in mortality from established occupational hazards in England and Wales. Methods We analysed data from death certificates on underlying cause of death and last full-time occupation for 3,688,916 deaths among men aged 20-74 years in England and Wales during 1979-2010 (excluding 1981 when records were incomplete). Proportional mortality ratios (PMRs), standardised for age and social class, were calculated for occupations at risk of specified hazards. Observed and expected numbers of deaths for each hazard were summed across occupations, and the differences summarised as average annual excesses. Results Excess mortality declined substantially for most hazards. For example, the annual excess of deaths from chronic bronchitis and emphysema fell from 170.7 during 1979-90 to 36.0 in 2001-10, and that for deaths from injury and poisoning from 237.0 to 87.5. In many cases the improvements were associated with falling PMRs (suggesting safer working practices), but they also reflected reductions in the numbers of men employed in more hazardous jobs, and declining mortality from some diseases across the whole population. Notable exceptions to the general improvement were diseases caused by asbestos, especially in some construction trades and sinonasal cancer in woodworkers. Conclusions The highest priority for future prevention of work-related fatalities is the minority of occupational disorders for which excess mortality remains static or is increasing, in particular asbestos-related disease among certain occupations in the construction industry and sinonasal cancer in woodworkers. PMID:26976946

Trends in mortality from occupational hazards among men in England and Wales during 1979-2010.

PubMed

Harris, E Clare; Palmer, Keith T; Cox, Vanessa; Darnton, Andrew; Osman, John; Coggon, David

2016-06-01

To monitor the impact of health and safety provisions and inform future preventive strategies, we investigated trends in mortality from established occupational hazards in England and Wales. We analysed data from death certificates on underlying cause of death and last full-time occupation for 3 688 916 deaths among men aged 20-74 years in England and Wales during 1979-2010 (excluding 1981 when records were incomplete). Proportional mortality ratios (PMRs), standardised for age and social class, were calculated for occupations at risk of specified hazards. Observed and expected numbers of deaths for each hazard were summed across occupations, and the differences summarised as average annual excesses. Excess mortality declined substantially for most hazards. For example, the annual excess of deaths from chronic bronchitis and emphysema fell from 170.7 during 1979-1990 to 36.0 in 2001-2010, and that for deaths from injury and poisoning from 237.0 to 87.5. In many cases, the improvements were associated with falling PMRs (suggesting safer working practices), but they also reflected reductions in the numbers of men employed in more hazardous jobs, and declining mortality from some diseases across the whole population. Notable exceptions to the general improvement were diseases caused by asbestos, especially in some construction trades and sinonasal cancer in woodworkers. The highest priority for future prevention of work-related fatalities is the minority of occupational disorders for which excess mortality remains static or is increasing, in particular asbestos-related disease among certain occupations in the construction industry and sinonasal cancer in woodworkers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Wood dust particle and mass concentrations and filtration efficiency in sanding of wood materials.

PubMed

Welling, Irma; Lehtimäki, Matti; Rautio, Sari; Lähde, Tero; Enbom, Seppo; Hynynen, Pasi; Hämeri, Kaarle

2009-02-01

The importance of fine particles has become apparent as the knowledge of their effects on health has increased. Fine particle concentrations have been published for outside air, plasma arc cutting, welding, and grinding, but little data exists for the woodworking industry. Sanding was evaluated as the producer of the woodworking industry's finest particles, and was selected as the target study. The number of dust particles in different particle size classes and the mass concentrations were measured in the following environments: workplace air during sanding in plywood production and in the inlet and return air; in the dust emission chamber; and in filter testing. The numbers of fine particles were low, less than 10(4) particles/cm(3) (10(7) particles/L). They were much lower than typical number concentrations near 10(6) particles/cm(3) measured in plasma arc cutting, grinding, and welding. Ultrafine particles in the size class less than 100 nm were found during sanding of MDF (medium density fiberboard) sheets. When the cleaned air is returned to the working areas, the dust content in extraction systems must be monitored continuously. One way to monitor the dust content in the return air is to use an after-filter and measure pressure drop across the filter to indicate leaks in the air-cleaning system. The best after-filtration materials provided a clear increase in pressure drop across the filter in the loading of the filter. The best after-filtration materials proved to be quite effective also for fine particles. The best mass removal efficiencies for fine particles around 0.3 mum were over 80% for some filter materials loaded with sanding wood dust.

Cross-shift changes in FEV1 in relation to wood dust exposure: the implications of different exposure assessment methods

PubMed Central

Schlunssen, V; Sigsgaard, T; Schaumburg, I; Kromhout, H

2004-01-01

Background: Exposure-response analyses in occupational studies rely on the ability to distinguish workers with regard to exposures of interest. Aims: To evaluate different estimates of current average exposure in an exposure-response analysis on dust exposure and cross-shift decline in FEV1 among woodworkers. Methods: Personal dust samples (n = 2181) as well as data on lung function parameters were available for 1560 woodworkers from 54 furniture industries. The exposure to wood dust for each worker was calculated in eight different ways using individual measurements, group based exposure estimates, a weighted estimate of individual and group based exposure estimates, and predicted values from mixed models. Exposure-response relations on cross-shift changes in FEV1 and exposure estimates were explored. Results: A positive exposure-response relation between average dust exposure and cross-shift FEV1 was shown for non-smokers only and appeared to be most pronounced among pine workers. In general, the highest slope and standard error (SE) was revealed for grouping by a combination of task and factory size, the lowest slope and SE was revealed for estimates based on individual measurements, with the weighted estimate and the predicted values in between. Grouping by quintiles of average exposure for task and factory combinations revealed low slopes and high SE, despite a high contrast. Conclusion: For non-smokers, average dust exposure and cross-shift FEV1 were associated in an exposure dependent manner, especially among pine workers. This study confirms the consequences of using different exposure assessment strategies studying exposure-response relations. It is possible to optimise exposure assessment combining information from individual and group based exposure estimates, for instance by applying predicted values from mixed effects models. PMID:15377768

Air formaldehyde and solvent concentrations during surface coating with acid-curing lacquers and paints in the woodworking and furniture industry.

PubMed

Thorud, Syvert; Gjolstad, Merete; Ellingsen, Dag G; Molander, Paal

2005-06-01

An investigation of contemporary exposure to formaldehyde and organic solvents has been carried out during surface coating with acid-curing lacquers and paints in the Norwegian woodworking and furniture industry over a period of 3 years. The investigation covered 27 factories of different sizes and with different types of production, and totally 557 parallel formaldehyde and solvent samples were collected. The formaldehyde concentration (geometric mean) was 0.15 ppm (range 0.01-1.48 ppm) with about 10% of the samples exceeding the Norwegian occupational exposure limit of 0.5 ppm. The solvent concentration as additive effect (geometric mean) was 0.13 (range 0.0004-5.08) and about 5% of the samples exceeded the Norwegian occupational exposure limit. The most frequently occurring solvents from acid-curing lacquers were n-butyl acetate, ethanol, ethyl acetate and 1-butanol, which were found in 88-98% of the samples. Toluene, n-butyl acetate and 1-butanol were the only solvents with maximum concentrations exceeding their respective occupational exposure limits. Curtain painting machine operators were exposed to the highest concentrations of both formaldehyde (geometric mean 0.51 ppm, range 0.08-1.48 ppm) and organic solvents (additive effect, geometric mean 1.18, range 0.02-5.08). Other painting application work tasks such as automatic and manual spray-painting, manual painting and dip painting, showed on average considerably lower concentrations of both formaldehyde (geometric means 0.07-0.16 ppm) and organic solvents (additive effect, geometric mean 0.02-0.18). Non-painting work tasks also displayed moderate concentrations of formaldehyde (geometric means 0.11-0.17 ppm) and organic solvents (additive effect, geometric mean 0.04-0.07).

Workers exposed to wood dust have an increased micronucleus frequency in nasal and buccal cells: results from a pilot study.

PubMed

Bruschweiler, Evin Danisman; Hopf, Nancy B; Wild, Pascal; Huynh, Cong Khanh; Fenech, Michael; Thomas, Philip; Hor, Maryam; Charriere, Nicole; Savova-Bianchi, Dessislava; Danuser, Brigitta

2014-05-01

Wood dust is recognised as a human carcinogen, based on the strong association of wood dust exposure and the elevated risk of malignant tumours of the nasal cavity and paranasal sinuses [sino-nasal cancer (SNC)]. The study aimed to assess genetic damage in workers exposed to wood dust using biomarkers in both buccal and nasal cells that reflect genome instability events, cellular proliferation and cell death frequencies. Nasal and buccal epithelial cells were collected from 31 parquet layers, installers, carpenters and furniture workers (exposed group) and 19 non-exposed workers located in Switzerland. Micronucleus (MN) frequencies were scored in nasal and buccal cells collected among woodworkers. Other nuclear anomalies in buccal cells were measured through the use of the buccal micronucleus cytome assay. MN frequencies in nasal and buccal cells were significantly higher in the exposed group compared to the non-exposed group; odds ratio for nasal cells 3.1 [95% confidence interval (CI) 1.8-5.1] and buccal cells 1.8 (95% CI 1.3-2.4). The exposed group had higher frequencies of cells with nuclear buds, karyorrhectic, pyknotic, karyolytic cells and a decrease in the frequency of basal, binucleated and condensed cells compared to the non-exposed group. Our study confirms that woodworkers have an elevated risk for chromosomal instability in cells of the aerodigestive tract. The MN assay in nasal cells may become a relevant biomonitoring tool in the future for early detection of SNC risk. Future studies should seek to standardise the protocol for MN frequency in nasal cells similar to that for MN in buccal cells.

52. The Murray Motors Building on the right (101 South ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

52. The Murray Motors Building on the right (101 South Colorado) is a one story building with a full basement for automobile storage. It has pest and beam construction, and has been altered only slightly. Both street facades have low, stepped gables. Beyond it, is the Parisian Dye House (56-60 West Galena), built in 1891 to house the Paumie Cleaners. The building still has its original cast-iron storefront on the ground floor as well as the original pressed-tin ceiling and woodwork inside. Metal window sills and lintles have been painted. - Butte Historic District, Bounded by Copper, Arizona, Mercury & Continental Streets, Butte, Silver Bow County, MT

9. Historic American Buildings Survey, Laurence E. Tilley, Photographer April, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Historic American Buildings Survey, Laurence E. Tilley, Photographer April, 1958 PALLADIAN WINDOW AT NORTH END OF CENTRAL HALL. 10. Historic American Buildings Survey, Laurence E. Tilley, Photographer April, 1958 CENTRAL VIEW OF DOUBLE PARLORS FROM SOUTHWEST PARLOR TOWARD NORTHWEST PARLOR. 11. Historic American Buildings Survey, Laurence E. Tilley, Photographer April, 1958 WALLPAPER IN SOUTHWEST PARLOR. 12. Historic American Buildings Survey, Laurence E. Tilley, Photographer April, 1958 FIREPLACE IN SOUTHWEST PARLOR. 13. Historic American Buildings Survey, Laurence E. Tilley, Photographer April, 1958 WINDOW IN SOUTHWEST PARLOR. 14. Historic American Buildings Survey, Laurence E. Tilley, Photographer April, 1958 DETAIL OF WALLPAPER AND WOODWORK IN ... - Eliza Ward House, 2 George Street, Providence, Providence County, RI

Perspective view. notes on reverse: The main facade of Mount ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Perspective view. notes on reverse: The main facade of Mount Atlas was built by Peter B. Whiting in 1790. All exterior woodwork except the cornice is said to be carved by Mr. Foley. Some original frames and casings around transom window over front door. Front door is also original. Some original beaded weatherboards on wall protected by basement entrance (poplar weatherboards). Porch added after 1900. Original mantelpiece with painting of girl above (may be a late eighteenth-century painting). Smokehouse to left is original. Charles B. Carter owned the house from 1801-35 and is buried in the cemetery nearby. - Mount Atlas, State Route 731 vicinity, Waterfall, Prince William County, VA

Determinants of Wood Dust Exposure in the Danish Furniture Industry—Results from Two Cross-Sectional Studies 6 Years Apart

PubMed Central

Schlünssen, Vivi; Jacobsen, Gitte; Erlandsen, Mogens; Mikkelsen, Anders B.; Schaumburg, Inger; Sigsgaard, Torben

2008-01-01

Objectives: This paper investigates determinants of wood dust exposure and trends in dust level in the furniture industry of Viborg County, Denmark, using data from two cross-sectional studies 6 years apart. Methods: During the winter 1997/1998, 54 factories were visited (hereafter study 1). In the winter 2003/2004, 27 factories were revisited, and personal dust measurements were repeated. In addition, 14 new factories were included (hereafter study 2). A total of 2303 woodworkers participated in study 1, and 2358 measurements from 1702 workers were available. From study 2, 1581 woodworkers participated and 1355 measurements from 1044 workers were available. Information on occupational variables describing potential determinants of exposures like work task, exhaust ventilation, enclosure and cleaning procedures were collected. A total of 2627 measurements and 1907 persons were included in the final mixed model in order to explore determinants of exposure and trends in dust level. Results: The overall inhalable wood dust concentration (geometric means (geometric standard deviation)) has decreased from 0.95 mg/m3 (2.05) in study 1 to 0.60 mg/m3 (1.63) in study 2, representing a 7% annual decrease in dust concentration, which was confirmed in the mixed model. From study 1 to study 2 there has been a change towards less manual work and more efficient cleaning methods, but on the contrary also more inadequate exhaust ventilation systems. The following determinants were found to ‘increase’ dust concentration: sanding; use of compressed air; use of full-automatic machines; manual work; cleaning of work pieces with compressed air; kitchen producing factories and small factories (<20 employees). The following determinants of exposure were found to ‘decrease’ dust concentration: manual assembling/packing; sanding with adequate exhaust ventilation; adequate exhaust ventilation; vacuum cleaning of machines and special cleaning staff. Conclusions: Despite a substantial drop in the dust concentration during the last 6 years in the furniture industry in Viborg County, further improvements are possible. There should be more focus on improved exhaust ventilation, professional cleaning methods and avoiding use of compressed air. PMID:18407937

Determinants of wood dust exposure in the Danish furniture industry--results from two cross-sectional studies 6 years apart.

PubMed

Schlünssen, Vivi; Jacobsen, Gitte; Erlandsen, Mogens; Mikkelsen, Anders B; Schaumburg, Inger; Sigsgaard, Torben

2008-06-01

This paper investigates determinants of wood dust exposure and trends in dust level in the furniture industry of Viborg County, Denmark, using data from two cross-sectional studies 6 years apart. During the winter 1997/1998, 54 factories were visited (hereafter study 1). In the winter 2003/2004, 27 factories were revisited, and personal dust measurements were repeated. In addition, 14 new factories were included (hereafter study 2). A total of 2303 woodworkers participated in study 1, and 2358 measurements from 1702 workers were available. From study 2, 1581 woodworkers participated and 1355 measurements from 1044 workers were available. Information on occupational variables describing potential determinants of exposures like work task, exhaust ventilation, enclosure and cleaning procedures were collected. A total of 2627 measurements and 1907 persons were included in the final mixed model in order to explore determinants of exposure and trends in dust level. The overall inhalable wood dust concentration (geometric means (geometric standard deviation)) has decreased from 0.95 mg/m(3) (2.05) in study 1 to 0.60 mg/m(3) (1.63) in study 2, representing a 7% annual decrease in dust concentration, which was confirmed in the mixed model. From study 1 to study 2 there has been a change towards less manual work and more efficient cleaning methods, but on the contrary also more inadequate exhaust ventilation systems. The following determinants were found to 'increase' dust concentration: sanding; use of compressed air; use of full-automatic machines; manual work; cleaning of work pieces with compressed air; kitchen producing factories and small factories (<20 employees). The following determinants of exposure were found to 'decrease' dust concentration: manual assembling/packing; sanding with adequate exhaust ventilation; adequate exhaust ventilation; vacuum cleaning of machines and special cleaning staff. Despite a substantial drop in the dust concentration during the last 6 years in the furniture industry in Viborg County, further improvements are possible. There should be more focus on improved exhaust ventilation, professional cleaning methods and avoiding use of compressed air.

Typical occupational accidents with employees of a university hospital in the south of Brazil: epidemiology and prevention.

PubMed

Sêcco, Iara Aparecida de Oliveira; Robazzi, Maria Lúcia do Carmo Cruz; Shimizu, Denise Sayuri; Rúbio, Márcia Maria da Silva

2008-01-01

Descriptive epidemiologic study that aimed to analyze the typical occupational accidents notified by employees of a university hospital in the South of Brazil from 1997 to 2002, and to estimate their risk indicators. A total of 717 accidents were registered; 86% of them (616) were typical and presented an annual average risk coefficient of 6.0 per 100 employees. The groups that presented more risks for accidents were cooks, woodworkers and nursing auxiliaries, while hands were the most affected area. Regarding the accidents nature, the greatest risks involved biological material. Hence, it is necessary to orient personnel about the legal aspects of occupational accidents and review work processes, especially those related to employees who perform activities at greater risk of transmissible diseases like AIDS and hepatitis B and C.

non-Hodgkin's lymphoma and occupation in Sweden: a registry based analysis.

PubMed Central

Linet, M S; Malker, H S; McLaughlin, J K; Weiner, J A; Blot, W J; Ericsson, J L; Fraumeni, J F

1993-01-01

Incidence of non-Hodgkin's lymphoma in different employment categories was evaluated from the Swedish Cancer-Environment Registry, which links cancer incidence during 1961 to 1979 with occupational information from the 1960 census. New associations were found for men employed in shoemaking and shoe repair, porcelain and earthenware industries, education, and other white collar occupations. Several findings supported associations found in other countries, including excesses among woodworkers, furniture makers, electric power plant workers, farmers, dairy workers, lorry drivers, and other land transport workers. Risks were not increased among chemists, chemical or rubber manufacturing workers, or petrochemical refinery workers. Caution must be used in drawing causal inferences from these linked registry data because information on exposure and duration of employment is not available. Nevertheless, this study has suggested new clues to possible occupational determinants of non-Hodgkin's lymphoma. PMID:8431395

Large-scale additive manufacturing with bioinspired cellulosic materials.

PubMed

Sanandiya, Naresh D; Vijay, Yadunund; Dimopoulou, Marina; Dritsas, Stylianos; Fernandez, Javier G

2018-06-05

Cellulose is the most abundant and broadly distributed organic compound and industrial by-product on Earth. However, despite decades of extensive research, the bottom-up use of cellulose to fabricate 3D objects is still plagued with problems that restrict its practical applications: derivatives with vast polluting effects, use in combination with plastics, lack of scalability and high production cost. Here we demonstrate the general use of cellulose to manufacture large 3D objects. Our approach diverges from the common association of cellulose with green plants and it is inspired by the wall of the fungus-like oomycetes, which is reproduced introducing small amounts of chitin between cellulose fibers. The resulting fungal-like adhesive material(s) (FLAM) are strong, lightweight and inexpensive, and can be molded or processed using woodworking techniques. We believe this first large-scale additive manufacture with ubiquitous biological polymers will be the catalyst for the transition to environmentally benign and circular manufacturing models.

Peculiarities of the processes of hydration of binding substances in the arbolite mixture

NASA Astrophysics Data System (ADS)

Innokentieva, L. S.; Egorova, A. D.; Emelianova, Z. V.

2017-09-01

Cement and sand solution is traditionally used for production of wood concrete. But it is known that impact of water-soluble substances of wood on the hardening cement is shown in the stabilizing effect. The "Cement poisons" consisting generally of the HOCH carbohydrate groups, sedimented on a surface of particles of minerals of cement 3CaO.SiO2 (three-calcic silicate) and 3CaO.Al2O3 (three-calcic aluminate) form the thinnest covers which complicate the course of processes of hydration of cement. Plaster in comparison with cement is less sensitive to extractive substances of wood therefore their combination to wood (including waste of logging and a woodworking) both coniferous and deciduous species is allowed. Composite plaster binding with hongurin as active mineral additive agent are applied at selection of composition of arbolite, at the same time dependences of their physicomechanical properties on characteristics of filler are received.

Study on the Influence of the Main Parameters of Woodworking Saw Blade on the Illumination Value of Band Saw Blade (1)

NASA Astrophysics Data System (ADS)

Gao, Jin-gui; Zhao, Hong-gang; Luo, Lai-peng

2017-04-01

In this paper, MJ3310A band saw machine as the research object, through the Beijing VIBSYS vibration signal acquisition and analysis software illumination value analysis, analysis of different circumstances to find good and crack band saw blade illumination value of the law. The results show that the illuminance of the cracked band saw blade is significantly higher than that of the complete band saw blade illumination value. Under the optimum working conditions, if the band saw blade illumination value exceeds 286 Lux, it can be determined that the band saw blade has at least one crack length greater than 1.68 mm Of the defects, the need for timely replacement band saw blade. So as to rational use of band saw blade, band saw blade on-line fault diagnosis provides a technical basis.

Full Dynamic Reactions in the Basic Shaft Bearings of Big Band Saw Machines

NASA Astrophysics Data System (ADS)

Marinov, Boycho

2013-03-01

The band saws machines are a certain class woodworking machines for longitudinal or transversal cutting as well as for curvilinear wood cutting. These machines saw the wood through a band-saw blade and two feeding wheels. These wheels usually are very large and they are produced with inaccuracies. The centre of mass of the disc is displaced from the axis of rotation of the distance e (eccentricity) and the axis of the disk makes an angle with the axis of rotation. In this paper, the dy- namic reactions in the bearings of the basic shaft, which drives the band saw machines, are analyzed. These reactions are caused by the external loading and the kinematics and the mass characteristics of the rotating disk. The expressions for the full dynamic reactions are obtained. These expressions allow the parameters of the machines to be chosen in such a way that the loading in the shaft and the bearings to be minimal.

Premium subsidies, the mandate, and Medicaid expansion: Coverage effects of the Affordable Care Act.

PubMed

Frean, Molly; Gruber, Jonathan; Sommers, Benjamin D

2017-05-01

Using premium subsidies for private coverage, an individual mandate, and Medicaid expansion, the Affordable Care Act (ACA) has increased insurance coverage. We provide the first comprehensive assessment of these provisions' effects, using the 2012-2015 American Community Survey and a triple-difference estimation strategy that exploits variation by income, geography, and time. Overall, our model explains 60% of the coverage gains in 2014-2015. We find that coverage was moderately responsive to price subsidies, with larger gains in state-based insurance exchanges than the federal exchange. The individual mandate's exemptions and penalties had little impact on coverage rates. The law increased Medicaid among individuals gaining eligibility under the ACA and among previously-eligible populations ("woodwork effect") even in non-expansion states, with no resulting reductions in private insurance. Overall, exchange premium subsidies produced 40% of the coverage gains explained by our ACA policy measures, and Medicaid the other 60%, of which 1/2 occurred among previously-eligible individuals. Copyright © 2017 Elsevier B.V. All rights reserved.

The new Health Sciences Library at the State University of New York at Buffalo.

PubMed Central

Fabrizio, N; Huang, C K

1988-01-01

The new Health Sciences Library at the State University of New York at Buffalo is a harmonious and functional blend of the old and the new. The old is a renovated Georgian style building with formal rooms containing fireplaces, carved woodwork and English oak paneling. The new is a contemporary four-story addition. Through the arrangement of space and the interior design, the new library offers users easy access to services and resources; accommodates the heavy daily flow of users and library materials; provides an environment of comfort, quiet, and safety; and promotes efficient communication among all segments of the library staff. This was accomplished through sound architectural design which included close consultation with the library director and staff during the planning process. The new library is equipped to face the challenge of meeting the needs of biomedical education, research, and clinical programs of the institution and its constituents in the years to come. Images PMID:3370382

"Cater to the children": the role of the lead industry in a public health tragedy, 1900-1955.

PubMed

Markowitz, G; Rosner, D

2000-01-01

A major source of childhood lead poisoning, still a serious problem in the United States, is paint. The dangers of lead were known even in the 19th century, and the particular dangers to children were documented in the English-language literature as early as 1904. During the first decades of the 20th century, many other countries banned or restricted the use of lead paint for interior painting. Despite this knowledge, the lead industry in the United States did nothing to discourage the use of lead paint on interior walls and woodwork. In fact, beginning in the 1920s, the Lead Industries Association and its members conducted an intensive campaign to promote the use of paint containing white lead, even targeting children in their advertising. It was not until the 1950s that the industry, under increasing pressure, adopted a voluntary standard limiting the amount of lead in interior paints.

"Cater to the children": the role of the lead industry in a public health tragedy, 1900-1955.

PubMed Central

Markowitz, G; Rosner, D

2000-01-01

A major source of childhood lead poisoning, still a serious problem in the United States, is paint. The dangers of lead were known even in the 19th century, and the particular dangers to children were documented in the English-language literature as early as 1904. During the first decades of the 20th century, many other countries banned or restricted the use of lead paint for interior painting. Despite this knowledge, the lead industry in the United States did nothing to discourage the use of lead paint on interior walls and woodwork. In fact, beginning in the 1920s, the Lead Industries Association and its members conducted an intensive campaign to promote the use of paint containing white lead, even targeting children in their advertising. It was not until the 1950s that the industry, under increasing pressure, adopted a voluntary standard limiting the amount of lead in interior paints. PMID:10630135

Gasification of torrefied fuel at power generation for decentralized consumers

NASA Astrophysics Data System (ADS)

Safin, R. R.; Khakimzyanov, I. F.; Galyavetdinov, N. R.; Mukhametzyanov, S. R.

2017-10-01

The increasing need of satisfaction of the existing needs of the population and the industry for electric energy, especially in the areas remote from the centralized energy supply, results in need of development of “small-scale energy generation”. At the same time, the basis in these regions is made by the energy stations, using imported fuel, which involve a problem of increase in cost and transportation of fuel to the place of consumption. The solution of this task is the use of the torrefied waste of woodworking and agricultural industry as fuel. The influence of temperature of torrefaction of wood fuel on the developed electric generator power is considered in the article. As a result of the experiments, it is revealed that at gasification of torrefied fuel from vegetable raw material, the generating gas with the increased content of hydrogen and carbon oxide, in comparison with gasification of the raw materials, is produced. Owing to this, the engine capacity increases that exerts direct impact on power generation by the electric generator.

Developmental Changes in Scots Pine Transcriptome during Heartwood Formation1[OPEN

PubMed Central

Paasela, Tanja; Harju, Anni; Paulin, Lars; Auvinen, Petri; Kärkkäinen, Katri

2016-01-01

Scots pine (Pinus sylvestris L.) wood is desired in woodworking industries due to its favorable timber characteristics and natural durability that is contributed by heartwood extractives. It has been discussed whether the Scots pine heartwood extractives (mainly stilbenes and resin acids) are synthesized in the cells of the transition zone between sapwood and heartwood, or if they are transported from the sapwood. Timing of heartwood formation during the yearly cycle has also not been unambiguously defined. We measured steady-state mRNA levels in Scots pine transition zone and sapwood using RNA sequencing. Year-round expression profiles of selected transcripts were further investigated by quantitative RT-PCR. Differentially accumulating transcripts suggest that, of the Scots pine heartwood extractives, stilbenes are synthesized in situ in the transition zone and gain their carbon-skeletons from Suc and triglycerides. Resin acids, on the other hand, are synthesized early in the spring mainly in the sapwood, meaning that they must be transported to the heartwood transition zone. Heartwood formation is marked by programmed cell death that occurs during the summer months in the transition zone. PMID:27600814

Numerical modelling of orthogonal cutting: application to woodworking with a bench plane.

PubMed

Nairn, John A

2016-06-06

A numerical model for orthogonal cutting using the material point method was applied to woodcutting using a bench plane. The cutting process was modelled by accounting for surface energy associated with wood fracture toughness for crack growth parallel to the grain. By using damping to deal with dynamic crack propagation and modelling all contact between wood and the plane, simulations could initiate chip formation and proceed into steady-state chip propagation including chip curling. Once steady-state conditions were achieved, the cutting forces became constant and could be determined as a function of various simulation variables. The modelling details included a cutting tool, the tool's rake and grinding angles, a chip breaker, a base plate and a mouth opening between the base plate and the tool. The wood was modelled as an anisotropic elastic-plastic material. The simulations were verified by comparison to an analytical model and then used to conduct virtual experiments on wood planing. The virtual experiments showed interactions between depth of cut, chip breaker location and mouth opening. Additional simulations investigated the role of tool grinding angle, tool sharpness and friction.

Self-employment in joinery: an occupational risk facor?

PubMed

Lesage, Francois-Xavier; Salles, Julie; Deschamps, Frederic

2014-06-01

Only a few studies have analyzed the health of self-employed workers. This cross-sectional study is the first to compare health status among craftsmen joiners and paid joiners. Clinical and paraclinical data for self-employed craftsmen and employees were collected by occupational health doctors according to a standardized protocol and compared. Health data and professional status relationships were analyzed by logistic regression. A total of 171 craftsmen and 196 paid workers were included. Craftsmen had more dermatologic pathologies (odds ratio (OR) = 2.67, p < 0.05), ear/nose/throat symptoms (OR = 3.38, p < 0.001), pulmonary symptoms (OR = 2.46, p < 0.05), musculoskeletal symptoms (OR = 3.09, p < 0.001), and abnormal audiogram (OR = 3.50, p < 0.001). The FEV1 was significantly lower among craftsmen (p < 0.01), independently of tobacco smoke exposure. This survey high-lights a high morbidity rate among self-employed craftsmen, suggesting that among woodworkers, professional status can be a risk factor for health. The preventive medical system for craftsmen has to be rethought to guarantee better safety for this population.

Occupational sensitization to epoxy resins in Northeastern Italy (1996-2010).

PubMed

Prodi, Andrea; Rui, Francesca; Fortina, Anna Belloni; Corradin, Maria Teresa; Filon, Francesca Larese

2015-01-01

One of the main health concerns of epoxy resins is their role as skin sensitizer. This sensitization is not uncommon, because the prevalence ranges around 1-12% of the general population. Perform a cross sectional study in a patch test population from Northeastern Italy to investigate the prevalence of epoxy resins sensitization among patients with suspected contact dermatitis. Subsequently, relate findings to patients' occupation and evaluate time trend of prevalence. The final study database included 19 088 consecutive patients, tested from 1996 to 2010 in Northeastern Italy. The overall prevalence of epoxy resins sensitization was 0·89%. Dermatitis most frequently involved hands (40·25%). In both sexes, we find a significant correlation in mechanics, woodworkers, and chemical industry workers; and in males only, among farmers and fishers, construction workers, and unemployed. We found significant increase of sensitization in construction workers in the analyzed period. The overall prevalence of sensitization to epoxy resins in Northeastern Italy is in line with other European countries, but we found an increased risk of sensitization in some professions and an increasing trend of prevalence in construction workers. Better preventive actions are strongly advised in higher risk professions, with particular attentions towards building sector.

Warnings unheeded: a history of child lead poisoning.

PubMed Central

Rabin, R

1989-01-01

Child lead poisoning has been a major public health issue only for the last 20-25 years. However, awareness that lead-based paint is a source of lead poisoning in children dates back to the first few years of the twentieth century. Articles in medical journals and textbooks appeared in the United States and elsewhere, recounting cases of children poisoned by the lead paint in their homes on woodwork, baby cribs, and other furniture. The number of positively diagnosed cases was limited both by the imprecision of diagnostic tools and physicians' lack of familiarity with the signs and symptoms of plumbism in children. Nevertheless, a number of hospitals and at least one large city health department recorded numerous cases of child lead poisoning in the 1920s and 1930s. The mounting evidence in those years made it clear that child lead poisoning was a serious public health hazard. And the activities and statements of the lead industry's representatives left little doubt that they were aware of the dangers of lead paint. Nevertheless, the lead paint companies continued to manufacture and sell their product well past 1940. Images FIGURE 1 PMID:2683817

Developmental Changes in Scots Pine Transcriptome during Heartwood Formation.

PubMed

Lim, Kean-Jin; Paasela, Tanja; Harju, Anni; Venäläinen, Martti; Paulin, Lars; Auvinen, Petri; Kärkkäinen, Katri; Teeri, Teemu H

2016-11-01

Scots pine (Pinus sylvestris L.) wood is desired in woodworking industries due to its favorable timber characteristics and natural durability that is contributed by heartwood extractives. It has been discussed whether the Scots pine heartwood extractives (mainly stilbenes and resin acids) are synthesized in the cells of the transition zone between sapwood and heartwood, or if they are transported from the sapwood. Timing of heartwood formation during the yearly cycle has also not been unambiguously defined. We measured steady-state mRNA levels in Scots pine transition zone and sapwood using RNA sequencing. Year-round expression profiles of selected transcripts were further investigated by quantitative RT-PCR. Differentially accumulating transcripts suggest that, of the Scots pine heartwood extractives, stilbenes are synthesized in situ in the transition zone and gain their carbon-skeletons from Suc and triglycerides. Resin acids, on the other hand, are synthesized early in the spring mainly in the sapwood, meaning that they must be transported to the heartwood transition zone. Heartwood formation is marked by programmed cell death that occurs during the summer months in the transition zone. © 2016 American Society of Plant Biologists. All Rights Reserved.

Occupational sensitization to epoxy resins in Northeastern Italy (1996–2010)

PubMed Central

Prodi, Andrea; Rui, Francesca; Fortina, Anna Belloni; Corradin, Maria Teresa; Filon, Francesca Larese

2015-01-01

Background: One of the main health concerns of epoxy resins is their role as skin sensitizer. This sensitization is not uncommon, because the prevalence ranges around 1–12% of the general population. Objectives: Perform a cross sectional study in a patch test population from Northeastern Italy to investigate the prevalence of epoxy resins sensitization among patients with suspected contact dermatitis. Subsequently, relate findings to patients’ occupation and evaluate time trend of prevalence. Methods: The final study database included 19 088 consecutive patients, tested from 1996 to 2010 in Northeastern Italy. Results: The overall prevalence of epoxy resins sensitization was 0·89%. Dermatitis most frequently involved hands (40·25%). In both sexes, we find a significant correlation in mechanics, woodworkers, and chemical industry workers; and in males only, among farmers and fishers, construction workers, and unemployed. We found significant increase of sensitization in construction workers in the analyzed period. Conclusions: The overall prevalence of sensitization to epoxy resins in Northeastern Italy is in line with other European countries, but we found an increased risk of sensitization in some professions and an increasing trend of prevalence in construction workers. Better preventive actions are strongly advised in higher risk professions, with particular attentions towards building sector. PMID:25633931

Occupational exposure to Polycyclic Aromatic Hydrocarbons in wood dust

NASA Astrophysics Data System (ADS)

Huynh, C. K.; Schüpfer, P.; Boiteux, P.

2009-02-01

Sino-nasal cancer (SNC) represents approximately 3% of Oto-Rhino-Laryngology (ORL) cancers. Adenocarcinoma SNC is an acknowledged occupational disease affecting certain specialized workers such as joiners and cabinetmakers. The high proportion of woodworkers contracting a SNC, subjected to an estimated risk 50 to 100 times higher than that affecting the general population, has suggested various study paths to possible causes such as tannin in hardwood, formaldehyde in plywood and benzo(a)pyrene produced by wood when overheated by cutting tools. It is acknowledged that tannin does not cause cancer to workers exposed to tea dust. Apart from being an irritant, formaldehyde is also classified as carcinogenic. The path involving carcinogenic Polycyclic Aromatic Hydrocarbons (PAHs) emitted by overheated wood is attractive. In this study, we measured the particle size and PAHs content in dust emitted by the processing of wood in an experimental chamber, and in field situation. Quantification of 16 PAHs is carried out by capillary GC-ion trap Mass Spectrometric analysis (GC-MS). The materials tested are rough fir tree, oak, impregnated polyurethane (PU) oak. The wood dust contains carcinogenic PAHs at the level of μg.g-1 or ppm. During sanding operations, the PU varnish-impregnated wood produces 100 times more PAHs in dust than the unfinished wood.

Occupation and lung cancer in two industrialized areas of northern Italy.

PubMed

Ronco, G; Ciccone, G; Mirabelli, D; Troia, B; Vineis, P

1988-03-15

A population-based case-control study on lung cancer was conducted in 2 industrialized areas of northern Italy. Cases (126) were all males who died from lung cancer between 1976 and 1980. Controls (384) were a random sample of males dying from other causes during the same period. Jobs held during working life have been analyzed according to a list of occupations already known to be causally associated with lung cancer (list A) and a list of occupations suspected of being so (list B). Attributable risk percentages in the population for occupations included in either list A or B were about 36% and 12% in the 2 areas. Welders or workers in industries in which welding is common showed elevated odds ratios: 2.9 for welders (95% CI 0.9-9.8); 4.9 (1.1-22.9) for structural metal workers; 11.4 (2.6-49.9) for workers in structural metal production. Other job categories associated with lung cancer included: electricians and workers in electrical machine production, woodworkers (in furniture or cabinet making, but not in carpentry or joinery) and cleaning services. Smoking did not seem to exert a substantial confounding effect. Attributable risk percentages for tobacco smoking were about 78% and 76% in the population of the 2 areas.

Quinonoid constituents as contact sensitisers in Australian blackwood (Acacia melanoxylon RBR).

PubMed Central

Hausen, B M; Schmalle, H

1981-01-01

Australian blackwood (Acacia melanoxylon RBR) is a valuable commercial timber that since 1925 has been incriminated as being injurious to health. In addition to toxic effects numerous cases of allergic contact dermatitis and bronchial asthma have been observed in woodworkers. Several constituents have been identified in recent years, but none of them could be considered as aetiological factors. Sensitizing experiments performed with blackwood heartwood extracts corroborated the described sensitising properties. Chemical studies showed the occurrence of two or possibly three quinones that produced positive skin responses in the sensitised guinea pigs. The main contact allergens were isolated and identified by x-ray analysis. The first, a yellow quinone, was identified as 2,6-dimethoxy-1,4-benzoquinone while the second, a red quinone, has the structure of 6-methoxy-2-methyl-3,5-dihydrobenzofurano-4,7-dion and was named acamelin. Whereas 2, 6-dimethoxy-p-benzoquinone is already known from natural sources, acamelin is new and belongs to the rate group of naturally occurring furanoquinones. Though the obtained sensitising capacity of A melanoxylon RBR in respect of its quinones is not high, it should be considered as a possible source of allergic contact dermatitis, especially as greater amounts of Australian blackwood may enter European countries in the near future. PMID:7236533

Desorption isotherms of heavy (AZOBE, EBONY) and light heavyweight tropical woods (IROKO, SAPELLI) of Cameroon

NASA Astrophysics Data System (ADS)

Nsouandélé, J. L.; Tamba, J. G.; Bonoma, B.

2018-04-01

This work is centered on the study of the desorption isotherms of heavy (Azobe, Ebony) and heavyweight (Iroko, Sapelli) tropical woods, which contribute in the determination of drying and storage of tropical plank woods. Desorption isotherms of tropical woods were experimentally determined under different temperatures in this study using the gravimetric method. The determination of Henderson's model isotherms parameters of desorption were obtained for temperatures of 20 °C, 30 °C, 40 °C, and 50 °C. The mean relative deviation between theoretical and experimental moisture contents was calculated and fitted well with the desorption models of tropical woods. We noticed that Henderson models fitted much better with experimental ones for 95% of relative humidity. The sigmoid shapes of results are satisfactory. Hysteresis phenomenon was observed for desorption isotherms of heavy (Azobe, Ebony) and heavyweight (Iroko, Sapelli) tropical woods. Results showed the difference between the stability and use of heavy and heavyweight tropical wood. These results help in the estimation of water content at equilibrium of tropical woods in relative humidity from experimented ones. Hygroscopic equilibrium humidity of heavy tropical woods varied between 0% and 50% while those of heavyweight varied between 0% and 25%. Therefore, these woods can be used in an opened environment; woodwork and decoration.

Hobbies with solvent exposure and risk of non-Hodgkin lymphoma.

PubMed

Colt, Joanne S; Hartge, Patricia; Davis, Scott; Cerhan, James R; Cozen, Wendy; Severson, Richard K

2007-05-01

Occupational exposure to solvents has been reported to increase non-Hodgkin lymphoma (NHL) risk in some, but not all, studies. In a population-based case-control study, we examined whether participation in selected hobbies involving solvent exposure increases NHL risk. We identified NHL cases diagnosed at ages 20-74 years between 1998 and 2000 in Iowa or metropolitan Los Angeles, Detroit, and Seattle. Controls were selected using random digit dialing or Medicare files. Computer-assisted personal interviews (551 cases, 462 controls) elicited data on model building, painting/silkscreening/artwork, furniture refinishing, and woodworking/home carpentry. Hobby participation (68% of cases, 69% of controls) was not associated with NHL risk (OR = 0.9, 95% CI = 0.7-1.2). Compared to people with none of the hobbies evaluated, those who built models had significantly lower risk (OR = 0.7, CI = 0.5-1.0), but risk did not vary with the number of years or lifetime hours. Risk estimates for the other hobbies were generally less than one, but the associations were not significant and there were no notable patterns with duration of exposure. Use of oil-based, acrylic, or water-based paints; paint strippers; polyurethane; or varnishes was not associated with NHL risk. We conclude that participation in hobbies involving exposure to organic solvents is unlikely to increase NHL risk.

Effect of Spindle Parameters of Woodworking Band Saw on the AE Value of Crack Band Saw Blade in Compound Material Processing (1)

NASA Astrophysics Data System (ADS)

Gao, Jin-gui; Jiang, Zhao-fang; Luo, Lai-peng

2017-04-01

Taking the MJ3210A motion band saw as the research object, the AE value of the band saw blade vibration was obtained by analyzing the VIBSYS vibration signal acquisition and analysis software system in Beijing, and the change of the AE value of the band saw and the crack was found out. The experimental results show that in the MJ3210A sports car sawing machine, the band saw blade with width of 130 mm is used, and the AE value of the cracked band saw blade is well in the high band saw blade AE value. Under the best working condition of the band saw, the band saw blade AE If the value exceeds 104.7 dB (A) above, it means that the band saw blade has at least one crack length greater than 1.38 mm for the crack defect and the need to replace the band saw blade in time. Different species with saw blade of the AE value is different, white pine wood minimum, the largest oak wood; according to a variety of wood processing AE instrument value to determine the band saw blade crack to the situation; so as to fully rational use of band saw blade, The failure and the degree of development to find a new method.

Diagnosis of the three-phase induction motor using thermal imaging

NASA Astrophysics Data System (ADS)

Glowacz, Adam; Glowacz, Zygfryd

2017-03-01

Three-phase induction motors are used in the industry commonly for example woodworking machines, blowers, pumps, conveyors, elevators, compressors, mining industry, automotive industry, chemical industry and railway applications. Diagnosis of faults is essential for proper maintenance. Faults may damage a motor and damaged motors generate economic losses caused by breakdowns in production lines. In this paper the authors develop fault diagnostic techniques of the three-phase induction motor. The described techniques are based on the analysis of thermal images of three-phase induction motor. The authors analyse thermal images of 3 states of the three-phase induction motor: healthy three-phase induction motor, three-phase induction motor with 2 broken bars, three-phase induction motor with faulty ring of squirrel-cage. In this paper the authors develop an original method of the feature extraction of thermal images MoASoID (Method of Areas Selection of Image Differences). This method compares many training sets together and it selects the areas with the biggest changes for the recognition process. Feature vectors are obtained with the use of mentioned MoASoID and image histogram. Next 3 methods of classification are used: NN (the Nearest Neighbour classifier), K-means, BNN (the back-propagation neural network). The described fault diagnostic techniques are useful for protection of three-phase induction motor and other types of rotating electrical motors such as: DC motors, generators, synchronous motors.

Exposures to asbestos arising from bandsawing gasket material.

PubMed

Fowler, D P

2000-05-01

A simulation of bandsawing sheet asbestos gasket material was performed as part of a retrospective exposure evaluation undertaken to assist in determining causation of a case of mesothelioma. The work was performed by bandsawing a chrysotile asbestos (80%)/neoprene gasket sheet with a conventional 16-inch woodworking bandsaw inside a chamber. Measurements of airborne asbestos were made using conventional area and personal sampling methods, with analysis of collected samples by transmission electron microscopy (TEM) and phase contrast microscopy (PCM). These were supplemented by qualitative scanning electron microscopy (SEM) examinations of some of the airborne particles collected on the filters. In contrast with findings from studies examining manual handling (installation and removal) of gaskets, airborne asbestos concentrations from this operation were found to be well above current Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) (eight-hour time-weighted average [TWA]) and excursion limit (30-minute) standards. Although some "encapsulation" effect of the neoprene matrix was seen on the particles in the airborne dust, unencapsulated individual fiber bundles were also seen. Suggestions for the implications of the work are given. In summary, the airborne asbestos concentrations arising from this work were quite high, and point to the need for careful observation of common sense precautions when manipulation of asbestos-containing materials (even those believed to have limited emissions potential) may involved machining operations.

Indoor exposure to formaldehyde and relation to asthma ...

EPA Pesticide Factsheets

Formaldehyde exposure is associated with asthma-like symptoms in occupational settings, but does exposure at lower concentrations in residential settings contribute to the current high burden of this respiratory disease? We conducted a systematic review and meta-analysis of asthma and lung function in humans, focusing on effects from long-term exposures. Our literature search through August 2013 identified 20 studies of asthma or asthma symptoms and 11 studies of lung function in PubMed and Web of Science meeting our inclusion criteria. For the asthma analysis, significant heterogeneity was present in the entire set of studies (p 0.051 mg/m3) and high occupational (> 0.1 mg/m3). Risk ratios (95% confidence interval) for these three categories, respectively, were 0.99 (0.93, 1.06), 1.5 (1.04, 2.1) and 6.3 (3.8, 10.6). The studies of lung function reported results as percent of predicted accounting for gender, age and height. These were occupational exposures with time-weighted formaldehyde concentrations of 0.1 – 1.5 mg/m3, primarily involving woodworking or chemical production. Overall, mean differences in lung function (95% confidence interval) between exposed and referent groups were -4.48 percent (-6.88, -2.09) for forced expiratory volume 1 second (FEV1), -4.08 percent (-6.33, -1.82) for forced vital capacity (FVC) and -7.29 percent (-11.

Environmental toxins and risk of narcolepsy among people with HLA DQB1*0602

PubMed Central

Ton, Thanh G.N.; Longstreth, WT; Koepsell, Thomas D.

2010-01-01

One etiologic model for narcolepsy suggests that some environmental toxin selectively and irreversibly destroys hypocretin-producing cells in individuals with human leukocyte antigen (HLA) DQB1*0602. Between 2001-2005, the authors conducted a population-based case-control study in King County, Washington to examine narcolepsy risk in relation to toxins found in jobs, hobbies and other non-vocational activities. Sixty-seven cases and 95 controls were enrolled; all were between ages 18-50 and positive for HLA DQB1*0602. All were administered in-person interviews about jobs, hobbies or other non-vocational activities before age 21. All analyses were adjusted for African American race and income. Risk increased significantly for jobs involving heavy metals (odds ratio [OR]=4.7; 95% confidence interval [CI]: 1.5, 14.5) and for highest levels of exposure to woodwork (OR: 3.0; 95% CI: 1.0, 8.9), fertilizer (OR=3.1; 95% CI: 1.1, 9.1), and bug or weed killer (OR=4.5; 95% CI: 1.5, 13.4). Associations were of borderline significance for activities involving ceramics, pesticides, and painting projects. Significant dose-response relationships were evident for jobs involving metals (p<0.03), paints (p<0.03), and bug or weed killer (p<0.02). Additional studies are needed to replicate these findings and continue the search for specific toxins that could damage hypocretin neurons in genetically susceptible people. PMID:20519130

Table saw injuries: epidemiology and a proposal for preventive measures.

PubMed

Chung, Kevin C; Shauver, Melissa J

2013-11-01

Table saws are ubiquitous devices in professional, home, and school woodshops that have the potential to cause severe injuries. Many of these injuries results in finger and thumb tendon, nerve, and vascular damage or amputation. Long-term outcomes of these injuries can include functional and sensory deficits. Table saw manufacturers are required to equip saws with blade guards to prevent blade contact; nevertheless, treatment of table saw injuries is a common occurrence in U.S. emergency departments. The authors performed a literature search using PubMed and the Cumulative Index to Nursing and Allied Health Literature to compile epidemiology data relevant to table saw injuries. The authors also reviewed the U.S. Consumer Product Safety Commission's briefing package on table saw blade contact injuries. Over 30,000 table saw injuries occur annually. Fingers and hands are the most frequently injured body parts, and lacerations are the most common injuries. Individuals suffering from occupational injuries tend to be younger than those injured during amateur woodworking. A small but important minority of injuries are to students participating in school shop classes. Medical costs for the treatment of table saw injuries are estimated at more than $2 billion every year. SawStop technology stops the saw blade when contact with skin is made, resulting in a small cut rather than a more complicated laceration or amputation. The application of this novel technology in saw designs can prevent serious injuries that deleteriously affect lives at the personal and societal levels.

Increase in energy efficiency of use of vegetable waste

NASA Astrophysics Data System (ADS)

Safin, R. R.; Safiullina, A. K.; Nazipova, F. V.

2017-10-01

Wastes of woodworking which are exposed to granulation for equalization of humidity, dispersion and also for increase in energy efficiency are the most widespread types of alternative fuel in Russia. Besides, one of the effective methods of the increase in calorific capability of granulates now is the preliminary torrefaction of wood waste - heat treatment without air oxygen access. However this technology is rather researched in detail only in relation to wood particles, while pellets from wastes of agricultural productions are also popular in the market in recent years. The possibility of the increase of the efficiency of production of pellets from sunflower pod by torrefaction is considered in this article, and the analysis of their characteristics in comparison with wood pellets is carried out. It is established that the process of heat treatment of waste of sunflower production is similar to torrefaction of wood raw materials in many respects; therefore, the equipment with similar characteristics can be used. According to the received results on pellet’s properties it is established that hygroscopicity and swelling of samples of fuel granules from sunflower pod considerably decreases with the increase in temperature of treatment that simplifies requirements for their storage and transportation. Besides, it is defined that torrefaction of the granulated fuel from sunflower pod does not yield in calorific properties to the similar fuel granules made of wood sawdust. Thus feasibility of use of heat treatment in production of fuel granules from waste of vegetable raw materials is proved.

Risks for respiratory and gastric cancer in wood-working occupations in Denmark.

PubMed

Olsen, J H; Møller, H; Jensen, O M

1988-01-01

Cases of cancer notified to the Danish Cancer Registry during the period 1970 to 1984 in the age groups 16 to 66 years have been linked to information on employment kept on file in the nationwide Supplementary Pension Fund since 1964. Industrial hygienists classified industrial groups as defined by the Pension Fund with regard to exposure to wood dust, and a list of industries with major exposure to wood dust was defined. The risk for cancer of the respiratory system and the gastrointestinal tract was evaluated by means of a proportional cancer incidence analysis. A fourfold increase in risk for sinonasal cancer was found among men involved in the manufacture of wooden furniture, and a twofold increase in risk for gastric cancer was seen in all of the component industries of basic wood-processing. In contrast, no excess of gastric cancer could be detected in men working in the manufacture of wooden building materials and wooden furniture, and a risk below unity was seen for those in carpentry and joinery. The elevated risk for gastric cancer in some wood-processing industries is probably due to social factors also common to men in agriculture and manufacturing. The absence of an increased risk for gastric cancer in trades in which a high risk for sinonasal cancer is seen indicates that wood dust is not of aetiological importance for gastric cancer. No excess of total lung cancer or of the adenocarcinoma subtype was seen in any of the wood-processing industries.

Herbert M. Lefcourt (1936-2011).

PubMed

Martin, Rod A; Steffy, Richard A

2012-09-01

Presents an obituary for Herbert M. Lefcourt. In the summer of 1963, with a freshly minted PhD degree in his hands, Lefcourt moved to Waterloo, Ontario, Canada. Along with several other young faculty members from the United States, Herb had been recruited to help establish a new PhD program in clinical psychology at the University of Waterloo. Over the ensuing years, it became recognized as one of the leading clinical programs in North America. Ever an optimist with a zest for life, Herb focused on the positive side of human nature in his research interests. While others studied stress and distress, Herb was more interested in the personality traits of people who are particularly resilient, able to withstand adversity without succumbing to illness and depression. Later in his career, his interests turned to the study of the sense of humor, again conceptualized as a personality variable with important implications for mental and physical health. Herb retired from the university in 1996 and was awarded the honorific of Distinguished Professor Emeritus. He had a very enjoyable retirement, pursuing his many interests, which included international travel, hiking, woodworking, literature, film, and classical music, and enjoying his summer cottage on Manitoulin Island in Lake Huron. He is remembered as an energetic teacher who, in addition to having an eclectic command of the theory and research, drew on his vast knowledge of literature, film, and current events to make his lectures interesting, informative, and thought-provoking. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

Chapter 17: Occupational immunologic lung disease.

PubMed

Sabin, Bradley R; Grammer, Leslie C

2012-01-01

Occupational immunologic lung disease is characterized by an immunologic response in the lung to an airborne agent inhaled in the work environment and can be subdivided into immunologically mediated occupational asthma (OA) and hypersensitivity pneumonitis (HP). Irritant-induced OA, a separate nonimmunologic entity, can be caused by chronic exposure to inhaled irritants or reactive airways dysfunction syndrome, defined as an asthma-like syndrome that persists for >3 months and occurs abruptly after a single exposure to a high concentration of an irritating industrial agent. High-risk fields for OA include farmers, printers, woodworkers, painters, plastic workers, cleaners, spray painters, electrical workers, and health care workers. OA can be triggered by high molecular weight (HMW) proteins that act as complete allergens or low molecular weight (LMW) sensitizers that act as haptens. HMW proteins (>10 kDa) are generally derived from microorganisms (such as molds and bacteria, including thermophilic actinomycetes), plants (such as latex antigens and flour proteins), or animals (such as animal dander, avian proteins, and insect scales) and are not specifically regulated by the Occupational Safety and Health Administration (OSHA). LMW haptens that bind to proteins in the respiratory mucosa include some OSHA-regulated substances such as isocyanates, anhydrides, and platinum. HP can present in an acute, a chronic, or a subacute form. The acute, subacute, and early chronic form is characterized by a CD4(+) T(H)1 and CD8(+) lymphocyte alveolitis. Classically, the bronchoalveolar lavage will show a CD4/CD8 ratio of <1.

Analysis of Facial Injuries Caused by Power Tools.

PubMed

Kim, Jiye; Choi, Jin-Hee; Hyun Kim, Oh; Won Kim, Sug

2016-06-01

The number of injuries caused by power tools is steadily increasing as more domestic woodwork is undertaken and more power tools are used recreationally. The injuries caused by the different power tools as a consequence of accidents are an issue, because they can lead to substantial costs for patients and the national insurance system. The increase in hand surgery as a consequence of the use of power tools and its economic impact, and the characteristics of the hand injuries caused by power saws have been described. In recent years, the authors have noticed that, in addition to hand injuries, facial injuries caused by power tools commonly present to the emergency room. This study aimed to review the data in relation to facial injuries caused by power saws that were gathered from patients who visited the trauma center at our hospital over the last 4 years, and to analyze the incidence and epidemiology of the facial injuries caused by power saws. The authors found that facial injuries caused by power tools have risen continually. Facial injuries caused by power tools are accidental, and they cause permanent facial disfigurements and functional disabilities. Accidents are almost inevitable in particular workplaces; however, most facial injuries could be avoided by providing sufficient operator training and by tool operators wearing suitable protective devices. The evaluation of the epidemiology and patterns of facial injuries caused by power tools in this study should provide the information required to reduce the number of accidental injuries.

The use of hearing protection devices by older adults during recreational noise exposure.

PubMed

Nondahl, D M; Cruickshanks, K J; Dalton, D S; Klein, B E K; Klein, R; Tweed, T S; Wiley, T L

2006-01-01

A population-based study to assess the use of hearing protection devices by older adults during noisy recreational activities was performed. The population-based Epidemiology of Hearing Loss Study was designed to measure the prevalence of hearing loss in adults residing in Beaver Dam, Wisconsin. The use of hearing protection devices during noisy recreational activities was assessed by performing three examinations over a period of 10 years (1993-1995, no. of participants (n)=3753, aged 48-92 years; 1998-2000, n=2800, aged 53-97 years; 2003-2005, n=2395, aged 58-100 years). The recreational activities included hunting, target shooting, woodworking/carpentry, metalworking, driving loud recreational vehicles, and performing yard work using either power tools or a chain saw. The prevalence of using hearing protection devices during any of these activities increased with time (9.5%, 15.0%, and 19.9% at baseline, 5 years, and 10 years, respectively). However, the use of hearing protection devices remained low for most activities. Those under the age of 65 were twice as likely to use hearing protection devices during noisy activities than were older adults. Men, those with a hearing handicap, and those with significant tinnitus were more likely to use hearing protection devices. Smokers and the less educated were less likely to use hearing protection devices. The results demonstrated that many adults expose themselves to potentially damaging recreational noise, leaving them at risk for hearing loss.

Effect of reduced use of organic solvents on disability pension in painters

PubMed Central

Järvholm, Bengt; Burdorf, Alex

2017-01-01

Objective To investigate whether the decreased use of paints based on organic solvents has caused a decreased risk for neuropsychiatric disorders in painters by studying their incidence in disability pensions. Methods The incidence of disability pension in Swedish painters who had participated in health examinations between 1971 and 1993 was studied through linkage with Swedish registers of disability pension over 1971–2010 and compared with the incidence in other construction workers as woodworkers, concrete workers and platers. When phasing out began in the 1970s, about 40% of paints were based on organic solvents and it had decreased to 4% in 1990s. The analysis was adjusted for age, time period, body mass index and smoking. Results The painters (n=23 065) had an increased risk of disability pension due to neurological diagnosis (n=285, relative risk (RR) 1.92, 95% CI 1.67 to 2.20) and psychiatric diagnosis (n=632, RR=1.61, 95 % CI 1.42 to 1.82). For neurological disorders there was a time trend with a continuously decreasing risk from 1980 onwards, but there was no such trend for psychiatric disorders. Conclusions High exposure to organic solvents increased the risk for disability pension in neurological disorders, and the risk decreased when the use of organic solvents decreased. The painters also had an increased risk of disability pension due to psychiatric disorders, but the causes have to be further investigated. PMID:28780566

Assessment of exposure to oak wood dust using gallic acid as a chemical marker.

PubMed

Carrieri, Mariella; Scapellato, Maria Luisa; Salamon, Fabiola; Gori, Giampaolo; Trevisan, Andrea; Bartolucci, Giovanni Battista

2016-01-01

The American Conference of Governmental Industrial Hygienists (ACGIH) has classified oak dust as a human carcinogen (A1), based on increased sinus and nasal cancer rates among exposed workers. The aims of this study were to investigate the use of gallic acid (GA) as a chemical marker of occupational exposure to oak dusts, to develop a high-performance liquid chromatography-diode array detector method to quantify GA and to apply the method in the analysis of oak dust samples collected in several factories. A high-performance liquid chromatography method was developed to detect GA in oak wood dust. The method was tested in the field, and GA was extracted from inhalable oak wood dust collected using the Institute of Occupational Medicine inhalable dust sampler in the air of five woodworking plants where only oak wood is used. A total of 57 samples with dust concentrations in the range of 0.27-11.14 mg/m(3) were collected. Five of these samples exceeded the Italian threshold limit value of 5 mg/m(3), and 30 samples exceeded the ACGIH TLV of 1 mg/m(3). The GA concentrations were in the range 0.02-4.18 µg/m(3). The total oak dust sampled was correlated with the GA content with a correlation coefficient (r) of 0.95. The GA in the tannic extracts of oak wood may be considered a good marker for this type of wood, and its concentration in wood dust sampled in the work environment is useful in assessing the true exposure to carcinogenic oak dust.

Men's Sheds and the experience of depression in older Australian men.

PubMed

Culph, Jennifer S; Wilson, Nathan J; Cordier, Reinie; Stancliffe, Roger J

2015-10-01

Men's Sheds are community spaces where, usually, older men can socialise as they participate in a range of woodwork and other activities. There is currently little research evidence supporting the anecdotally reported mental health and wellbeing benefits of Men's Sheds. This research project investigated how older men with self-reported symptoms of depression experience their participation in Men's Sheds. This study included in-depth interviews and administration of the Beck Depression Inventory-II with 12 men from 3 Men's Sheds, triangulated with observation of the different shed environments. Interviews explored how participation in the Men's Shed, living in a regional area, and retirement intersected with experiences of depression. Participants had either self-reported symptoms of depression or a diagnosis of depression. The findings from this study support the notion that participation at Men's Sheds decreases self-reported symptoms of depression. Beck Depression Inventory-II scores showed that most participants were currently experiencing minimal depression. The Men's Sheds environment promoted a sense of purpose through relationships and in the sharing of skills, new routines, motivation, and enjoyment for its members. The shed encouraged increased physical activity and use of cognitive skills. Finally, participants reported feelings of pride and achievement which had an impact on their sense of self-worth. Men's Sheds provide an opportunity to promote health and wellbeing among retired men. The shed's activity and social focus offers a way to help men rediscover purpose and self. Further research is required to measure symptoms of depression before and after participation in Men's Sheds. © 2015 Occupational Therapy Australia.

Cook Island artifact geochemistry demonstrates spatial and temporal extent of pre-European interarchipelago voyaging in East Polynesia

PubMed Central

Weisler, Marshall I.; Bolhar, Robert; Ma, Jinlong; St Pierre, Emma; Sheppard, Peter; Walter, Richard K.; Feng, Yuexing; Zhao, Jian-xin; Kirch, Patrick V.

2016-01-01

The Cook Islands are considered the “gateway” for human colonization of East Polynesia, the final chapter of Oceanic settlement and the last major region occupied on Earth. Indeed, East Polynesia witnessed the culmination of the greatest maritime migration in human history. Perennial debates have critiqued whether Oceanic settlement was purposeful or accidental, the timing and pathways of colonization, and the nature and extent of postcolonization voyaging—essential for small founding groups securing a lifeline between parent and daughter communities. Centering on the well-dated Tangatatau rockshelter, Mangaia, Southern Cook Islands, we charted the temporal duration and geographic spread of exotic stone adze materials—essential woodworking tools found throughout Polynesia— imported for more than 300 y beginning in the early AD 1300s. Using a technique requiring only 200 mg of sample for the geochemical analysis of trace elements and isotopes of fine-grained basalt adzes, we assigned all artifacts to an island or archipelago of origin. Adze material was identified from the chiefly complex on the Austral Islands, from the major adze quarry complex on Tutuila (Samoa), and from the Marquesas Islands more than 2,400 km distant. This interaction is the only dated example of down-the-line exchange in central East Polynesia where intermediate groups transferred commodities attesting to the interconnectedness and complexity of social relations fostered during postsettlement voyaging. For the Cook Islands, this exchange may have lasted into the 1600s, at least a century later than other East Polynesian archipelagos, suggesting that interarchipelago interaction contributed to the later development of social hierarchies. PMID:27382159

Students' Reactions to Climate Change Adaptation Risks and Opportunities

NASA Astrophysics Data System (ADS)

Thiel, M.; Grant, J. H.

2015-12-01

Objectives/Scope How undergraduate (UG) business students at a major public university in the Rocky Mountain region develop appreciation, and some understanding of physical and natural sciences causing climate change (CC) and their implications for society through examples drawn from the students' immediate and meaningful physical environments. Methods, Procedures, Process Three regional examples of ways in which CC impacts the lives of students on the local campus will provide practical approaches for students' environmentally responsible actions beyond the classroom. The cases from different industries will help UG students learn how they play critical roles in preventing and managing natural hazards, disaster management, ecology, development, famine, and secure livelihoods. Observations, Results, Conclusions Classroom discussions of "businesses' ecological responsibilities" in some remote location often fail to "connect" with students who have spent most of their lives within 300 miles of campus. However, when businesses in Asia are adding particulate to the atmosphere in the jet stream over the Pacific, and subsequently graying the local ski slopes, causing early melting and delaying the start of ski seasons, that is a different matter! However, more summer activities offer economic opportunities! A second example is found among the local entrepreneurial woodworkers who take "beetle kill" pine trees that are wildfire hazards and convert them into beautiful, creatively described "blue pine" furniture, interior beams, wall panels and table-top decorations. The "industrial scale" anaerobic digesters used in the "circular economy" of giant cheese factories, dairy farms and packing plants offer a third example for linking business to chemistry, engineering, and aesthetics (odor reduction).

Comparison of Two Music Training Approaches on Music and Speech Perception in Cochlear Implant Users

PubMed Central

Fuller, Christina D.; Galvin, John J.; Maat, Bert; Başkent, Deniz; Free, Rolien H.

2018-01-01

In normal-hearing (NH) adults, long-term music training may benefit music and speech perception, even when listening to spectro-temporally degraded signals as experienced by cochlear implant (CI) users. In this study, we compared two different music training approaches in CI users and their effects on speech and music perception, as it remains unclear which approach to music training might be best. The approaches differed in terms of music exercises and social interaction. For the pitch/timbre group, melodic contour identification (MCI) training was performed using computer software. For the music therapy group, training involved face-to-face group exercises (rhythm perception, musical speech perception, music perception, singing, vocal emotion identification, and music improvisation). For the control group, training involved group nonmusic activities (e.g., writing, cooking, and woodworking). Training consisted of weekly 2-hr sessions over a 6-week period. Speech intelligibility in quiet and noise, vocal emotion identification, MCI, and quality of life (QoL) were measured before and after training. The different training approaches appeared to offer different benefits for music and speech perception. Training effects were observed within-domain (better MCI performance for the pitch/timbre group), with little cross-domain transfer of music training (emotion identification significantly improved for the music therapy group). While training had no significant effect on QoL, the music therapy group reported better perceptual skills across training sessions. These results suggest that more extensive and intensive training approaches that combine pitch training with the social aspects of music therapy may further benefit CI users. PMID:29621947

Comparison of Two Music Training Approaches on Music and Speech Perception in Cochlear Implant Users.

PubMed

Fuller, Christina D; Galvin, John J; Maat, Bert; Başkent, Deniz; Free, Rolien H

2018-01-01

In normal-hearing (NH) adults, long-term music training may benefit music and speech perception, even when listening to spectro-temporally degraded signals as experienced by cochlear implant (CI) users. In this study, we compared two different music training approaches in CI users and their effects on speech and music perception, as it remains unclear which approach to music training might be best. The approaches differed in terms of music exercises and social interaction. For the pitch/timbre group, melodic contour identification (MCI) training was performed using computer software. For the music therapy group, training involved face-to-face group exercises (rhythm perception, musical speech perception, music perception, singing, vocal emotion identification, and music improvisation). For the control group, training involved group nonmusic activities (e.g., writing, cooking, and woodworking). Training consisted of weekly 2-hr sessions over a 6-week period. Speech intelligibility in quiet and noise, vocal emotion identification, MCI, and quality of life (QoL) were measured before and after training. The different training approaches appeared to offer different benefits for music and speech perception. Training effects were observed within-domain (better MCI performance for the pitch/timbre group), with little cross-domain transfer of music training (emotion identification significantly improved for the music therapy group). While training had no significant effect on QoL, the music therapy group reported better perceptual skills across training sessions. These results suggest that more extensive and intensive training approaches that combine pitch training with the social aspects of music therapy may further benefit CI users.

Effect of reduced use of organic solvents on disability pension in painters.

PubMed

Järvholm, Bengt; Burdorf, Alex

2017-11-01

To investigate whether the decreased use of paints based on organic solvents has caused a decreased risk for neuropsychiatric disorders in painters by studying their incidence in disability pensions. The incidence of disability pension in Swedish painters who had participated in health examinations between 1971 and 1993 was studied through linkage with Swedish registers of disability pension over 1971-2010 and compared with the incidence in other construction workers as woodworkers, concrete workers and platers. When phasing out began in the 1970s, about 40% of paints were based on organic solvents and it had decreased to 4% in 1990s. The analysis was adjusted for age, time period, body mass index and smoking. The painters (n=23 065) had an increased risk of disability pension due to neurological diagnosis (n=285, relative risk (RR) 1.92, 95% CI 1.67 to 2.20) and psychiatric diagnosis (n=632, RR=1.61, 95 % CI 1.42 to 1.82). For neurological disorders there was a time trend with a continuously decreasing risk from 1980 onwards, but there was no such trend for psychiatric disorders. High exposure to organic solvents increased the risk for disability pension in neurological disorders, and the risk decreased when the use of organic solvents decreased. The painters also had an increased risk of disability pension due to psychiatric disorders, but the causes have to be further investigated. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Correlates and Predictors of Conflict at the End of Life Among Families Enrolled in Hospice.

PubMed

Kramer, Betty J; Boelk, Amy Z

2015-08-01

Despite the palliative care mandate to view family as the unit of care, and the high prevalence and detrimental consequences of conflict at the end of life, little research has been conducted with hospice families to understand what contributes to family conflict. Using a recently generated explanatory matrix of family conflict at the end of life, this study sought to identify the correlates and predictors of family conflict. As part of a larger mixed methods cross-sectional study, a 100-item survey was administered to 161 hospice family caregivers enrolled in a Medicare/Medicaid certified non-profit hospice organization located in the Midwest U.S. Although overall levels of conflict were relatively low, 57% of hospice caregivers reported experiencing some family conflict at the end of life. Contextual variables associated with family conflict included a history of family conflict, female gender, younger caregiver age, presence of children in the home, and less advance care planning discussions. Significant main effects in the prediction of family conflict in the final hierarchical multiple regression model included prior family conflict, caregiver age, caregiver gender, advance care planning discussions, family "coming out of the woodwork," communication constraints, and family members asserting control. The model explained 59% of the variance in family conflict. Results support the multidimensional theoretical model of family conflict specifying the importance of the family context, key conditions that set the stage for conflict, and essential contributing factors. Implications for routine assessment and screening to identify families at risk and recommendations for future research are highlighted. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Wood-related occupations, wood dust exposure, and sinonasal cancer.

PubMed

Hayes, R B; Gerin, M; Raatgever, J W; de Bruyn, A

1986-10-01

A case-control study was conducted to examine the relations between type of woodworking and the extent of wood dust exposure to the risks for specific histologic types of sinonasal cancer. In cooperation with the major treatment centers in the Netherlands, 116 male patients newly diagnosed between 1978 and 1981 with primary malignancies of epithelial origin of this site were identified for study. Living controls were selected from the municipal registries, and deceased controls were selected from the national death registry. Interviews were completed for 91 (78%) cases and 195 (75%) controls. Job histories were coded by industry and occupation. An index of exposure was developed to classify the extent of occupational exposure to wood dust. When necessary, adjustment was made for age and usual cigarette use. The risk for nasal adenocarcinoma was elevated by industry for the wood and paper industry (odds ratio (OR) = 11.9) and by occupation for those employed in furniture and cabinet making (OR = 139.8), in factory joinery and carpentry work (OR = 16.3), and in association with high-level wood dust exposure (OR = 26.3). Other types of nasal cancer were not found to be associated with wood-related industries or occupations. A moderate excess in risk for squamous cell cancer (OR = 2.5) was associated with low-level wood dust exposure; however, no dose-response relation was evident. The association between wood dust and adenocarcinoma was strongest for those employed in wood dust-related occupations between 1930 and 1941. The risk of adenocarcinoma did not appear to decrease for at least 15 years after termination of exposure to wood dust. No cases of nasal adenocarcinoma were observed in men whose first exposure to wood dust occurred after 1941.

Development and Validation of a Practical Instrument for Injury Prevention: The Occupational Safety and Health Monitoring and Assessment Tool (OSH-MAT).

PubMed

Sun, Yi; Arning, Martin; Bochmann, Frank; Börger, Jutta; Heitmann, Thomas

2018-06-01

The Occupational Safety and Health Monitoring and Assessment Tool (OSH-MAT) is a practical instrument that is currently used in the German woodworking and metalworking industries to monitor safety conditions at workplaces. The 12-item scoring system has three subscales rating technical, organizational, and personnel-related conditions in a company. Each item has a rating value ranging from 1 to 9, with higher values indicating higher standard of safety conditions. The reliability of this instrument was evaluated in a cross-sectional survey among 128 companies and its validity among 30,514 companies. The inter-rater reliability of the instrument was examined independently and simultaneously by two well-trained safety engineers. Agreement between the double ratings was quantified by the intraclass correlation coefficient and absolute agreement of the rating values. The content validity of the OSH-MAT was evaluated by quantifying the association between OSH-MAT values and 5-year average injury rates by Poisson regression analysis adjusted for the size of the companies and industrial sectors. The construct validity of OSH-MAT was examined by principle component factor analysis. Our analysis indicated good to very good inter-rater reliability (intraclass correlation coefficient = 0.64-0.74) of OSH-MAT values with an absolute agreement of between 72% and 81%. Factor analysis identified three component subscales that met exactly the structure theory of this instrument. The Poisson regression analysis demonstrated a statistically significant exposure-response relationship between OSH-MAT values and the 5-year average injury rates. These analyses indicate that OSH-MAT is a valid and reliable instrument that can be used effectively to monitor safety conditions at workplaces.

The effects of wood dusts on the redox status and cell death in mouse macrophages (RAW 264.7) and human leukocytes in vitro.

PubMed

Naarala, J; Kasanen, J-P; Pasanen, P; Pasanen, A-L; Liimatainen, A; Pennanen, S; Liesivuori, J

2003-07-11

Wood dusts are classified as carcinogenic to humans and also produce other toxic, allergic, and acute effects in woodworkers. However, little is known about causative agents in wood dusts and their mechanisms of action. The effects of different tree species and particle size for biological activity were studied. The differences in the production of reactive oxygen species (ROS) and cell death (necrotic and apoptotic) between mouse macrophage (RAW 264.7) cells and human polymorphonuclear leukocytes (PMNL) for pine, birch, and beech dust exposures were investigated in vitro. The pine and birch dust exposure (1-100 microg/ml) produced concentration-dependent ROS production in both the cells, which was one order of magnitude higher with pine dust. The ROS production was faster in human PNML than murine RAW cells. The higher concentrations (500 and/or 1000 microg/ml) decreased ROS formation. With pine and birch dust exposure, this was probably due to the necrotic cell death. The pine dust concentrations of 500 and 1000 microg/ml were cytotoxic to human PMNL. The beech dust exposure activated the ROS production and decreased the cell viability only at the highest concentrations, being least potent of the three dusts. A sign of the apoptotic cell death in the murine RAW cells was observed at the pine dust concentration of 100 microg/ml. The exposure to the birch and beech dusts with a smaller particle size (<5 microm) produced greater ROS production than exposure to the corresponding dust with a wide range of particle sizes. However, changing the particle size did not affect the cell viability. The results indicate that the type of wood dust (tree species and possibly particle size) has a significant impact on the function and viability of phagocytic cells.

A Case Study of a High School Fab Lab

NASA Astrophysics Data System (ADS)

Lacy, Jennifer E.

This dissertation examines making and design-based STEM education in a formal makerspace. It focuses on how the design and implementation of a Fab Lab learning environment and curriculum affect how instructors and students see themselves engaging in science, and how the Fab Lab relates to the social sorting practices that already take place at North High School. While there is research examining design-based STEM education in informal and formal learning environments, we know little about how K-12 teachers define STEM in making activities when no university or museum partnership exists. This study sought to help fill this gap in the research literature. This case study of a formal makerspace followed instructors and students in one introductory Fab Lab course for one semester. Additional observations of an introductory woodworking course helped build the case and set it into the school context, and provided supplementary material to better understand the similarities and differences between the Fab Lab course and a more traditional design-based learning course. Using evidence from observational field notes, participant interviews, course materials, and student work, I found that the North Fab Lab relies on artifacts and rhetoric symbolic of science and STEM to set itself apart from other design-based courses at North High School. Secondly, the North Fab Lab instructors and students were unable to explain how what they were doing in the Fab Lab was science, and instead relied on vague and unsupported claims related to interdisciplinary STEM practices and dated descriptions of science. Lastly, the design and implementation of the Fab Lab learning environment and curriculum and its separation from North High School's low tech, design-based courses effectively reinforced social sorting practices and cultural assumptions about student work and intelligence.

Determinants of wood dust exposure in the Danish furniture industry.

PubMed

Mikkelsen, Anders B; Schlunssen, Vivi; Sigsgaard, Torben; Schaumburg, Inger

2002-11-01

This paper investigates the relation between wood dust exposure in the furniture industry and occupational hygiene variables. During the winter 1997-98 54 factories were visited and 2362 personal, passive inhalable dust samples were obtained; the geometric mean was 0.95 mg/m(3) and the geometric standard deviation was 2.08. In a first measuring round 1685 dust concentrations were obtained. For some of the workers repeated measurements were carried out 1 (351) and 2 weeks (326) after the first measurement. Hygiene variables like job, exhaust ventilation, cleaning procedures, etc., were documented. A multivariate analysis based on mixed effects models was used with hygiene variables being fixed effects and worker, machine, department and factory being random effects. A modified stepwise strategy of model making was adopted taking into account the hierarchically structured variables and making possible the exclusion of non-influential random as well as fixed effects. For woodworking, the following determinants of exposure increase the dust concentration: manual and automatic sanding and use of compressed air with fully automatic and semi-automatic machines and for cleaning of work pieces. Decreased dust exposure resulted from the use of compressed air with manual machines, working at fully automatic or semi-automatic machines, functioning exhaust ventilation, work on the night shift, daily cleaning of rooms, cleaning of work pieces with a brush, vacuum cleaning of machines, supplementary fresh air intake and safety representative elected within the last 2 yr. For handling and assembling, increased exposure results from work at automatic machines and presence of wood dust on the workpieces. Work on the evening shift, supplementary fresh air intake, work in a chair factory and special cleaning staff produced decreased exposure to wood dust. The implications of the results for the prevention of wood dust exposure are discussed.

The archaeology, chronology and stratigraphy of Madjedbebe (Malakunanja II): A site in northern Australia with early occupation.

PubMed

Clarkson, Chris; Smith, Mike; Marwick, Ben; Fullagar, Richard; Wallis, Lynley A; Faulkner, Patrick; Manne, Tiina; Hayes, Elspeth; Roberts, Richard G; Jacobs, Zenobia; Carah, Xavier; Lowe, Kelsey M; Matthews, Jacqueline; Florin, S Anna

2015-06-01

Published ages of >50 ka for occupation at Madjedbebe (Malakunanja II) in Australia's north have kept the site prominent in discussions about the colonisation of Sahul. The site also contains one of the largest stone artefact assemblages in Sahul for this early period. However, the stone artefacts and other important archaeological components of the site have never been described in detail, leading to persistent doubts about its stratigraphic integrity. We report on our analysis of the stone artefacts and faunal and other materials recovered during the 1989 excavations, as well as the stratigraphy and depositional history recorded by the original excavators. We demonstrate that the technology and raw materials of the early assemblage are distinctive from those in the overlying layers. Silcrete and quartzite artefacts are common in the early assemblage, which also includes edge-ground axe fragments and ground haematite. The lower flaked stone assemblage is distinctive, comprising a mix of long convergent flakes, some radial flakes with faceted platforms, and many small thin silcrete flakes that we interpret as thinning flakes. Residue and use-wear analysis indicate occasional grinding of haematite and woodworking, as well as frequent abrading of platform edges on thinning flakes. We conclude that previous claims of extensive displacement of artefacts and post-depositional disturbance may have been overstated. The stone artefacts and stratigraphic details support previous claims for human occupation 50-60 ka and show that human occupation during this time differed from later periods. We discuss the implications of these new data for understanding the first human colonisation of Sahul. Copyright © 2015 Elsevier Ltd. All rights reserved.

Self-Evaluation Scores of Hearing Difficulties and Quality of Life Components among Retired Workers with Noise-Related Hearing Loss

NASA Astrophysics Data System (ADS)

MIYAKITA, T.; UEDA, A.; ZUSHO, H.; KUDOH, Y.

2002-02-01

This study is intended to clarify the relationships between hearing loss caused both by noise exposure and aging and self-rated scores of hearing disabilities and to elucidate the structure of the quality of life (QOL) determinants and their moderating conditions among retired workers with noise-related hearing loss. The questionnaire consisted of three parts: background questions, the hearing disabilities and handicap scale (HDHS), and questions regarding QOL covering five areas, self-rated health, personal health practice, social support network, life satisfaction, and life events. Two hundred ten retired workers aged 56-65 years old (60·6±1·6) with noise-related hearing loss responded to our questionnaire. All were previously engaged in noise exposed work such as shipbuilding, steel and woodwork. According to the hearing disability score (DIS score), subjects were divided into three groups and comparisons were made of the hearing handicap score (HD score) among those groups. Although groups with a higher DIS score showed a higher HD score, a large individual difference in HD score was observed in each of the three groups with the same DIS score level. The results of multiple regression analysis including two variables (life satisfaction and HD score) as the dependent variables and seven variables as the independent variables showed that the strongest explanatory variable for life satisfaction was social support network, followed by handicaps caused by hearing disabilities, self-rated health and personal health practice. It was demonstrated that hearing disabilities and handicap measured by the Japanese version of the HDHS were directly associated with the deterioration in QOL. Measures of the social support network, life satisfaction, and hearing disabilities and handicaps may assist in the detection of workers who can be targeted for a variety of interventions, such as audiological rehabilitation or the creation of a barrier-free community that is supportive of the hearing impaired.

Evaluation of annual exposure to noise among private farmers on selected family farms of animal production profile.

PubMed

Solecki, Leszek

2005-01-01

The aim of the study was the recognition and evaluation of annual exposure to noise among private farmers on family farms of animal production profile. The study covered 16 family farms using arable land of the size of 14-50 ha (25.8 ha on average), equipped with agricultural tractors (working with a set of agricultural machines), machines for the production of fodder, workshop machines and woodworking saws. Based on the precise working time schedules concerning agricultural activities and dosimetric measurements conducted during the whole year, two acoustic parameters were determined: total exposure in individual months and equivalent daily exposure. The study showed that the highest values of the total monthly exposure to noise occurred in two summer-autumn months (August, October) and during four winter-spring months (January, March, and May, June). High values of the total exposure observed in the summer-autumn season result from the performance of intensive field and transport work activities, with prolonged duration of work and a large number of workdays in these months. The occurrence of high total values of the total exposure in winter-spring months, however, is associated with logging wood for winter (saws) and intensive repair work activities. In the seasons of the year analysed, high values of equivalent daily exposure were obtained, within the range: 4.20-4.86 Pa(2) x h. The average value of this parameter for the whole year reached the value: 3.61 Pa(2) x h (standard exceeded 3.6 times). This value is equivalent to the mean level of exposure to noise equal to 90.5 dB. In consideration of the moderate accuracy of mean values obtained and small degree of variability of the results, the data acquired in this study may be used in practice by proper State services for the evaluation of noise risk among private farmers specializing in animal production.

Occupation and work-related ill-health in UK construction workers.

PubMed

Stocks, S J; Turner, S; McNamee, R; Carder, M; Hussey, L; Agius, R M

2011-09-01

Construction workers are at increased risk of work-related ill-health (WRI) worldwide. To compare the incidence of medically reported WRI in occupations within the UK construction industry according to job title. We calculated standardized incidence rate ratios (SRRs) using WRI cases for individual job titles returned to The Health and Occupation Reporting network by clinical specialists and UK population denominators. We counted frequencies of reported causal exposures or tasks reported by clinical specialists, occupational physicians and general practitioners. We found significantly increased incidence of WRI compared with other workers in the same major Standard Occupational Classification, i.e. workers with similar levels of qualifications, training, skills and experience, for skin neoplasia in roofers (SRR 6.3; 95% CI: 3.1-13.1), painters and decorators (2.1; 95% CI: 1.2-3.6) and labourers in building and woodworking trades (labourers, 6.6; 95% CI: 3.2-13.2); contact dermatitis in metal workers (1.4; 95% CI: 1.1-1.7) and labourers (1.6; 95% CI: 1.1-2.3); asthma in welders (3.8; 95% CI: 2.8-5.0); musculoskeletal disorders in welders (1.7; 95% CI: 1.1-2.8), road construction operatives (6.1; 95% CI: 3.8-9.6) and labourers (2.5; 95% CI: 1.7-3.7); long latency respiratory disease (mesothelioma, pneumoconiosis, lung cancer, non-malignant pleural disease) in pipe fitters (4.5; 95% CI: 3.2-6.2), electrical workers (2.7; 95% CI: 2.4-3.2), plumbing and heating engineers (2.3; 95% CI: 1.9-2.7), carpenters and joiners (2.7; 95% CI: 2.3-3.1), scaffolders (12; 95% CI: 8-18) and labourers (3.3; 95% CI: 2.6-4.1). UK construction industry workers have significantly increased risk of WRI. These data in individual construction occupations can be used to inform appropriate targeting of occupational health resources.

Determinants of indoor and personal exposure to PM 2.5 of indoor and outdoor origin during the RIOPA study

NASA Astrophysics Data System (ADS)

Meng, Qing Yu; Spector, Dalia; Colome, Steven; Turpin, Barbara

2009-12-01

Effects of physical/environmental factors on fine particle (PM 2.5) exposure, outdoor-to-indoor transport and air exchange rate ( AER) were examined. The fraction of ambient PM 2.5 found indoors ( F INF) and the fraction to which people are exposed ( α) modify personal exposure to ambient PM 2.5. Because F INF, α, and AER are infrequently measured, some have used air conditioning (AC) as a modifier of ambient PM 2.5 exposure. We found no single variable that was a good predictor of AER. About 50% and 40% of the variation in F INF and α, respectively, was explained by AER and other activity variables. AER alone explained 36% and 24% of the variations in F INF and α, respectively. Each other predictor, including Central AC Operation, accounted for less than 4% of the variation. This highlights the importance of AER measurements to predict F INF and α. Evidence presented suggests that outdoor temperature and home ventilation features affect particle losses as well as AER, and the effects differ. Total personal exposures to PM 2.5 mass/species were reconstructed using personal activity and microenvironmental methods, and compared to direct personal measurement. Outdoor concentration was the dominant predictor of (partial R2 = 30-70%) and the largest contributor to (20-90%) indoor and personal exposures for PM 2.5 mass and most species. Several activities had a dramatic impact on personal PM 2.5 mass/species exposures for the few study participants exposed to or engaged in them, including smoking and woodworking. Incorporating personal activities (in addition to outdoor PM 2.5) improved the predictive power of the personal activity model for PM 2.5 mass/species; more detailed information about personal activities and indoor sources is needed for further improvement (especially for Ca, K, OC). Adequate accounting for particle penetration and persistence indoors and for exposure to non-ambient sources could potentially increase the power of epidemiological analyses linking health effects to particulate exposures.

Assessment of indoor levels of volatile organic compounds and carbon dioxide in schools in Kuwait.

PubMed

Al-Awadi, Layla

2018-01-01

Indoor air quality (IAQ) in schools is a matter of concern because children are most vulnerable and sensitive to pollutant exposure. Conservation of energy at the expense of ventilation in heating, ventilation, and air conditioning (HVAC) systems adversely affects IAQ. Extensive use of new materials in building, fitting, and refurbishing emit various pollutants such that the indoor environment creates its own discomfort and health risks. Various schools in Kuwait were selected to assess their IAQ. Comprehensive measurements of volatile organic compounds (VOCs) consisting of 72 organic compounds consisting of aliphatic (C 3 -C 6 ), aromatic (C 6 -C 9 ), halogenated (C 1 -C 7 ), and oxygenated (C 2 -C 9 ) functional groups in indoor air were made for the first time in schools in Kuwait. The concentrations of indoor air pollutants revealed hot spots (science preparation rooms, science laboratories, arts and crafts classes/paint rooms, and woodworking shops/decoration rooms where local sources contributed to the buildup of pollutants in each school. The most abundant VOC pollutant was chlorodifluoromethane (R22; ClF 2 CH), which leaked from air conditioning (AC) systems due to improper operation and maintenance. The other copious VOCs were alcohols and acetone at different locations due to improper handling of the chemicals and their excessive uses as solvents. Indoor carbon dioxide (CO 2 ) levels were measured, and these levels reflected the performance of HVAC systems; a specific rate or lack of ventilation affected the IAQ. Recommendations are proposed to mitigate the buildup of indoor air pollutants at school sites. Indoor air quality in elementary schools has been a subject of extreme importance due to susceptibility and sensibility of children to air pollutants. The schools were selected based on their surrounding environment especially downwind direction from the highly industrialized zone in Kuwait. Extensive sampling from different sites in four schools for comprehensive VOCs and CO 2 were completed for an extended period of over a year. Different hot spots were identified where leaked refrigerant and inadequate handling of laboratory solvents contributed to the high VOCs in the respective locations. CO 2 levels reflected HVAC performance and poor ventilation. A list of recommendations has been proposed to eradicate these high levels of air pollution.

Occupations associated with COPD risk in the large population-based UK Biobank cohort study.

PubMed

De Matteis, Sara; Jarvis, Deborah; Hutchings, Sally; Darnton, Andy; Fishwick, David; Sadhra, Steven; Rushton, Lesley; Cullinan, Paul

2016-06-01

Chronic obstructive pulmonary disease (COPD) is a leading cause of morbidity and mortality worldwide. Exposure to occupational hazards is an important preventable risk factor but the contribution of specific occupations to COPD risk in a general population is uncertain. Our aim was to investigate the association of COPD with occupation in the UK population. In 2006-2010, the UK Biobank cohort recruited 502 649 adults aged 40-69 years. COPD cases were identified by prebronchodilator forced expiratory volume in 1 s/forced vital capacity

An evaluation of total and inhalable samplers for the collection of wood dust in three wood products industries.

PubMed

Harper, Martin; Muller, Brian S

2002-10-01

In 1998 the American Conference for Governmental Industrial Hygienists (ACGIH) proposed size selective sampling for wood dust based on the inhalable fraction. Thus the proposed threshold limit values (TLVs) require the use of a sampler whose performance matches the inhalable convention. The Institute of Occupational Medicine (IOM) sampler has shown good agreement with the inhalable convention under controlled conditions, and the Button sampler, developed by the University of Cincinnati, has shown reasonable agreement in at least one laboratory study. The Button sampler has not been previously evaluated under wood working conditions, and the IOM has been shown to sample more mass than expected when compared to the standard closed-face cassette, which may be due to the collection of very large particles in wood working environments. Some projectile particles may be > 100 microm aerodynamic diameter and thus outside the range of the convention. Such particles, if present, can bias the estimates of concentration considerably. This study is part of an on-going research focus into selecting the most appropriate inhalable sampler for use in these industries, and to examine the impact of TLV changes. This study compared gravimetric analyses (National Institute of Occupational Safety and Health Method 0500) of side-by-side personal samples using the Button, IOM, and 37 mm closed-face cassette (CFC) under field-use conditions. A total of 51 good sample pairs were collected from three wood products industries involved in the manufacturing of cabinets, furniture, and shutters. Paired t-tests were run on each sample pair using Statistical Package for the Social Sciences (SPSS) version 10. The IOM and the CFC measured statistically different concentrations (p < 0.0005, n = 16). The IOM and Button measured statistically different concentrations (p = 0.020, n = 12). The Button and CFC did not measure statistically different concentrations of wood dust (p = 0.098, n = 23). Sampler ratios for IOM/CFC pairs ranged from 1.19-19 (median 3.35). Sampler ratios for IOM/Button pairs ranged from 0.49-163 (median 3.15). Sampler ratios for CFC/Button pairs ranged from 0.36-27 (median 1.2). In all cases, higher ratios were associated with higher concentrations. The median relative difference between the IOM's and CFC's is in accord with prior field studies in woodworking environments, and, taken together, the data imply a conversion factor greater than the 2.5 normally applied to CFC results to approximate inhalable values, as measured by the IOM. Raising the limit values by approximately 50% appears warranted for this particular situation of inhalable wood dust measured by the IOM. The IOM/Button and CFC/Button ratios were unexpectedly low, which may be due to the exclusion of very large particles, collected by the IOM and CFC samplers. Further work is required to explain these results.

Predictors of monoterpene exposure in the Danish furniture industry.

PubMed

Hagström, Katja; Jacobsen, Gitte; Sigsgaard, Torben; Schaumburg, Inger; Erlandsen, Mogens; Schlunssen, Vivi

2012-04-01

Individuals who work with pine in the furniture industry may be exposed to monoterpenes, the most abundant of which are α-pinene, β-pinene, and Δ(3)-carene. Monoterpenes are suspected to cause dermatitis and to harm the respiratory system. An understanding of the predictors of monoterpene exposure is therefore important in preventing these adverse effects. These predictors may include general characteristics of the work environment and specific work operations. We sought to assess the extent to which workers are exposed to monoterpenes and to identify possible predictors of monoterpene exposure in the pine furniture industry in Denmark. Passive measurements of the levels of selected monoterpenes (α-pinene, β-pinene, and Δ(3)-carene) were performed on 161 subjects from 17 pine furniture factories in Viborg County, Denmark; one sample was acquired from each worker. Additionally, wood dust samples were collected from 145 workers. Data on potential predictors of exposure were acquired over the course of the day on which the exposure measurements were recorded and could be assigned to one of four hierarchic ordered levels: worker, machine, department, and factory. In addition to univariate analyses, a mixed model was used to account for imbalances within the data and random variation with each of the hierarchically ordered levels. The geometric mean (GM) monoterpene content observed over the 161 measurements was 7.8 mg m(-3) [geometric standard deviation (GSD): 2.4]; the GM wood dust level over 145 measurements was 0.58 mg m(-3) (GSD: 1.49). None of the measured samples exceeded the occupational exposure limit for terpenes in Denmark (25 ppm, 150 mg m(-3)). In the univariate analyses, half of the predictors tested were found to be significant; the multivariate model indicated that only three of the potential predictors were significant. These were the recirculation of air in rooms used for the processing of wood (a factory level predictor), the presence of a supplementary cold air intake (departmental level), and the operation of a glue press (machine level). However, only one factory of the 17 examined used a supplementary cold air intake, and while very high monoterpene levels were observed there, this may be due to factors other than the supplementary intake. In contrast to the situation with wood dust, we found that the bulk of the variation in the data (65%) was attributable to variability on the factory level, with comparatively little being due to the departmental (16%) and machine (0.5%) levels. The fixed terms in the model accounted for 31.8% of the total variance. The predictors of monoterpenes are not the same as those for wood dust exposure; this has implications for the implementation of preventative measures in factories. In order to decrease monoterpene exposure, efforts should be focused on minimizing the recirculation of air in rooms used for woodworking and on increasing awareness of the importance of effective ventilation and enclosure when operating a glue press.

Soil Magnetism and Magnetic Anomalies at the Marshall's Pen Archaeological Site, Mandeville, Jamaica

NASA Astrophysics Data System (ADS)

Figueroa, E.; Sternberg, R. S.; Delle, J. A.; Lawrence, N. D.; McAdoo, B. G.; Savina, M. E.

2002-05-01

Marshall's Pen, a 1000-acre parcel of land in Mandeville, Jamaica, underlain by limestone bedrock and bauxite soils, served as a coffee plantation in the early 19th century. Two to three hundred slaves of African descent worked the plantation from AD 1802 until slavery was abolished in Jamaica in 1838. The goal of the archaeological program at Marshall's Pen is to complement what little is known about Jamaican slave society from the historical record. Geophysical prospection was conducted at Marshall's Pen by ten undergraduate students as part of a Keck Geology Consortium project in the summer of 1999. In the slaves' village consisting of living and domestic labor areas, G858 cesium vapor magnetometer readings were taken every 0.1 seconds along 49 profiles, each 50 m long and spaced 1 meter apart, and magnetic susceptibility readings were taken at 1-meter intervals. Seven significant magnetic anomalies (up to 100 nT peak-to-peak) were detected in the village. Two of these were found to be caused by a buried machete and an iron woodworking tool. Three anomalies were associated with a large area of black, burned soil. Archaeological testing in this area produced partially carbonized seeds, charcoal, ceramics that were smudged after manufacture, and cutlery; this evidence suggests a domestic kitchen area. In situ susceptibility readings were zero on bedrock and low on the bauxite soils. Susceptibility readings generally correlated with the magnetics, to values as high as 50 (x 10-6, volume specific SI) in the ``kitchen'' area, suggesting a source in the susceptibility contrast for these magnetic anomalies. Soil samples were collected from the bauxite outside the village, and from the village area in the summer of 2001; ten village sites were sampled away from the kitchen area, and four from the kitchen area. Five samples from each site were boxed, weighed, and measured for laboratory susceptibility measurements. Eleven samples outide the village had a geometric mean susceptibility of 144 (x 10-8, mass-specific SI); forty-nine samples from the ten village off-kitchen sites had a mean susceptibility of 105; twenty samples from the four village on-kitchen sites had a mean susceptibility of 821. One sample from a village off-kitchen site had a susceptibility of 1894 due to the head of a roofing nail included in the sample. Isothermal remanent magnetization experiments were carried out on one sample from most sites. Three samples from outside the village had ratios of IRM(0.1T)/IRM(1.0T) of 0.76, 0.5, and 0.74; ratios for ten samples from the village away from the kitchen were between 0.72-0.77; ratios for two samples from the village in the kitchen were more easily saturated with values of 0.90 and 1.0. The susceptibility and IRM results are consistent with reduction of hematite from sites outside the kitchen to magnetite or maghemite at sites within the kitchen area. The resulting higher susceptibilities could generate the magnetic anomalies in this area.

[Occupational mortality in Italy during 1992, assessed through record-linkage between pension records and death certificates].

PubMed

d'Errico, A; Filippi, M; Demaria, M; Picanza, Grazia; Crialesi, Roberta; Costa, G; Campo, G; Passerini, M

2005-01-01

The creation of a surveillance system of occupational mortality in Italy is limited by the low quality of information on occupation in death certificates, since the information is often incomplete or lacking and because only the occupation at the time of death is registered. To evaluate the possible use of INPS (National Institute of Social Security) records for the purpose of surveillance of occupational mortality, in terms of feasibility of setting up a system and of validity of the results obtained. Death records of 218,510 subjects aged 18-74, deceased in the 12 months following the 1991 census, were obtained from ISTAT (Central Statistics Institute). These were combined through record-linkage with the INPS social security archives, which contain the employment records by economic sector going back to 1974, in order to assign these deaths the sector in which they had worked the longest. Mortality by specific causes was evaluated by industry by means of a proportional mortality analysis stratified by sex and occupational status, and adjusted for age, education, marital status, geographical area of birth, drawing a disability pension, employment status at the time of death and work instability. Record-linkage allowed attribution of the longest held job to 70% of the deaths recorded. Results are presented and discussed only on mortality in men due to asbestosis and silicosis, and causes of death with a substantial proportion attributable to occupation: chronic obstructive pulmonary disease (COPD); cancers of the bladder, nasal cavity, larynx, lung and pleura; leukaemia and lymphoma; accidental causes. Among the economic sectors with a significant excess mortality, the following are well documented in the literature: mortality due to COPD in the coal and peat-bog sectors; due to leukaemia among farmers; due to sino-nasal tumours in wood-working and furniture production; due to cancer of the larynx, lung, and pleura in occupations where there was probable exposure to asbestos (fishing and maritime transport, non-metal mining, building industry, and naval, train and aircraft construction); due to silicosis in industries with potential exposure to crystalline silica; due to accidental causes in the building industry and farming. Other mortality excesses and deficits, especially those due to bladder and lympho-haemopoietic cancers, appear to be only partly consistent with those described by other authors. The feasibility of developing a surveillance system of occupational mortality based on the INPS source was found to be good, and, at least among males, for 75% of the deceased subjects historical information existed concerning the economic sectors registered in the INPS records. The results obtained would appear to indicate that the system is capable of highlighting risk excesses due to widespread exposure in the industries examined, regarding diseases for which there is a strong association with exposure. On the other hand, due to the inherent limits of the study's design (lack of a complete work history and of precise information on the jobs held) its use is not recommended in the surveillance of diseases with a low proportion attributable to a risk factor, or with wide exposure variability in a given sector among the various jobs.

Obituary: Donald Alexander Macrae, 1916-2006

NASA Astrophysics Data System (ADS)

Seaquist, E. R.

2007-12-01

With the passing of Donald Alexander MacRae on 6 December 2006 at age 90, the astronomy community lost a visionary scientist and a great educator in the field. Don MacRae was born in Halifax, Nova Scotia, on 19 February 1916, to Donald Alexander and Laura Geddes (Barnstead) MacRae. His father was originally a classics scholar and preceptor of Greek and Latin at Princeton, but at the time of Don's birth in 1916 he was Dean of the Dalhousie Law School in Halifax. The family moved to Toronto, Ontario, in 1924 when his father joined the faculty of Osgoode Hall Law School in Toronto as a Professor of Law. After the family moved to Toronto, where he received most of his early education, he obtained his undergraduate degree in Mathematics and Physics in 1937 from the University of Toronto (U of T). He obtained the degree of A.M. in 1940 and of Ph.D. in 1943 from Harvard University under the mentorship of Bart Bok in the field of galactic structure. During his early career he worked briefly at the University of Pennsylvania, Cornell University, and Carbide and Chemical Corporation at Oak Ridge, Tennessee. For Don the latter work was a brief and somewhat uneasy association with the Manhattan Project. In 1946, he obtained a position at Case Institute of Technology (now Case Western Reserve University), where he worked until 1953. In 1953, he accepted a position at the U of T, replacing Ralph Williamson, who had earlier introduced Don to the emerging field of radio astronomy while they both were at Cornell. Don's primary research field was stellar spectroscopy, but his interests were much broader than this, and he possessed an abiding ability to interest students and faculty in new and emerging ideas. In the early 1960s he developed a strong interest in the nature and origin of the lunar surface, and discussed these extensively with colleagues. Many of his ideas on this subject were later confirmed by the lunar exploration program. Don's continuing interest in radio astronomy led him to introduce this subject area into the Toronto graduate research and teaching curriculum. In collaboration with the Department of Electrical Engineering, he established a radio astronomy observing site at the U of T's David Dunlap Observatory (DDO) in 1956. This was at a time when few astronomers took this subject seriously. The DDO work led to the precise determination of the absolute flux density of Cas A at 320 MHz, a radiometric standard as important today as it was when it was reported in 1963. On behalf of the University of Toronto, he subsequently participated in radio astronomy activity at the National Research Council's (NRC's) new Algonquin Radio Observatory in Algonquin Park. The radio astronomy program that Don established was an early stimulus for the first successful experiment in Very Long Baseline Interferometry in 1967, a collaboration among the University of Toronto, Queen's University, and NRC. As a teacher, Don was highly regarded by his students, whom he engaged with his characteristic wit and frequent anecdotes. His lectures always were well prepared and organized, and endowed with an underlying belief that the ideas and principles of physics were most easily understood by applying them first to the stars. As an innovative teacher, he was the first professor at Toronto to teach computer programming at the university, recognizing early that students would need such skills in their scientific careers. Similarly, he was a strong advocate for public outreach. He was featured in the Oscar-nominated short film "Universe" produced in 1960 by the National Film Board of Canada. He also was instrumental in the establishment of the McLaughlin Planetarium, which opened in Toronto in October 1968. In honor of his strong record in education, the U of T established an undergraduate scholarship in Don's name in 2003 to reward promising undergraduates in the astronomy program. In 1965, Don became Head of the Department and Director of the DDO, and continued in these positions for thirteen years. During this period, he presided over a major expansion of the Department, which made it the major center of astronomical activity in Canada. This included the establishment in 1971 of a 24-inch telescope at the site of the Carnegie Southern Observatory at Las Campanas, Chile. The clear weather and excellent seeing conditions at Las Campanas attracted many graduate students to study astronomy at the U of T. It was also used by many astronomers from other institutions. Don MacRae was an active participant in the establishment of national observing facilities for all Canadian astronomers. He supported the establishment the Algonquin Radio Observatory in the 1960s to serve the growing community in the emerging field of radio astronomy. He participated in the planning and development of the Canada-France-Hawaii-Telescope (CFHT) on Mauna Kea, Hawaii, in the 1970s, and served as one of four Canadian astronomers on the Board of the CFHT Corporation from 1973 to 1979. He was appointed as Board Chair in 1978 for the last year of his term. During the 1970s Don was elected to the Board of Trustees of the Universities Space Research Association (USRA), dedicated to promoting cooperation between NASA and North American universities. He served as USRA Board Chair in 1973. Don was also an active member of the AAS since 1943, and served as AAS Councilor from 1963-1966. Although Don retired in 1982 and was appointed Professor Emeritus in the Department, he continued his interest in departmental activity for many years after. During the 45 years I knew Don, both as his graduate student 1961-1966, and later as one of his colleagues, I shared with his friends and associates an enduring respect for his wisdom, generosity, sense of humor, powers of observation, and rigorous attention to accuracy and detail. He maintained an abiding ambition to create a leading department and to help in establishing a world-renowned astronomical community in Canada. His legacy is that he succeeded in both areas. Don enjoyed a life-long interest in photography, carpentry and woodworking. In retirement, he spent a great deal of time on family genealogy. He possessed a strong "do-it-yourself" philosophy, manifested for example in clearing land and building a cottage on Georgian Bay, a family project during his younger years. Don died in Toronto of natural causes. He is survived by his older sister Jean Borden, and his three sons David, Charles, and Andrew. Don's wife Betty predeceased him by about one year. He is also survived by his four granddaughters and two grandsons, in all of whom he delighted, as well as nieces and nephews who were particularly dear to him.

Editorial: A dedication to Professor Jan Evetts

NASA Astrophysics Data System (ADS)

Weber, Harald; Dew-Hughes, David; Campbell, Archie; Barber, Zoe; Somekh, Rob; Glowacki, Bartek

2006-03-01

A few days before the beginning of the 7th European Conference on Applied Superconductivity we learned that Professor Jan Evetts, a pioneer of superconductor research, a brilliant scientist, a wonderful person and a great personal friend, had passed away. We therefore decided to dedicate the 7th European Conference on Applied Superconductivity to the memory of Jan Evetts. The following citation is based on material provided by his former supervisor (D Dew-Hughes) and his closest co-workers in Cambridge. Professor Jan Edgar Evetts (1939-2005) Professor Jan Edgar Evetts (1939-2005) Jan Evetts passed away after losing his second battle with cancer on 24th August 2005. He made an outstanding series of contributions to the science of superconductivity and to the understanding of superconducting materials and was an indefatigable champion of the development of applications of superconductivity. The loss to the superconductivity community is incalculable, as attested by the many communications received from colleagues throughout the world. Jan was born on 31 March 1939, and attended the Dragon School in Oxford, and later Haileybury. He was awarded an exhibition to read Natural Sciences at Pembroke College, Cambridge. He entered the college in 1958 and took his BA degree in 1961. He then undertook a Certificate of Postgraduate Study in Physics under the supervision of Professor Neville Mott. He was the first student to undertake this newly-instituted course; the title of his thesis was `The Resistance of Transition Metals'. In 1962 he joined David Dew-Hughes' superconducting materials research group, along with Archie Campbell and Anant Narlikar. In fact it was Jan's enthusiasm for the proposed course of research that helped convince David that he should follow Professor Alan Cottrell's suggestion to apply metallurgical methodology to the study of the factors that controlled critical current density in the type II superconductors that were then under development for applications in magnets. Competing theories for the critical current density at that time were fine filaments or `Mendelssohn Sponge' versus the pinning of Abrikosov quantized vortices. The results of the group's work, to which Jan made a major contribution, came down heavily in favour of the latter theory. Jan's outstanding characteristic was his meticulous and painstaking approach to every piece of work that he tackled. His attention to detail, and his ability to design elegant experiments, was unique. He was awarded a PhD for his thesis `The Magnetisation of Superconducting Lead Alloys'. The work on flux pinning culminated in the publication of `Critical Currents in Superconductors', a research monograph (co-authored with Archie Campbell) that rapidly became the standard reference work in the field. It has recently been reprinted in the Advances in Physics `Classic Articles' series as the 9th most cited article in the journal's history (2001 Adv. Phys. 50 1249-449). Jan was appointed to a research fellowship at Pembroke College and to a Science Research Council Research Fellowship in the Department of Metallurgy in 1965. After David Dew-Hughes left Cambridge, Jan inherited the superconducting materials research group and was appointed University Demonstrator in Metallurgy and a full Fellow in Pembroke College in 1966. He progressed steadily through the various levels of academic rank, finally being appointed Professor of Device Materials in 1998. Under his direction his research group grew until it comprised some 40 people, and expanded its research interests to thin films and magnetic materials. Jan's work on superconductivity was always paralleled by research on magnetic materials; the cross fertilization between disciplines has been very fruitful and led to him editing Pergamon's `Concise Encyclopedia of Magnetic and Superconducting Materials' in 1992. This work has been a major success with a world-wide readership. To give a more personal picture of Jan and his achievements one can do no better than to quote in full the eulogy delivered by Professor Archie Campbell at Jan's funeral service. `In 1962 I was given a studentship in the Metallurgy Department to work for a PhD under David Dew-Hughes on the subject of superconductivity, and told another student would be someone called `Jan Evetts'. I little realised this would be the start of not only a scientific collaboration but also a personal friendship which would last until now, 43 years later. It quickly became clear that Evetts was not a singular noun but came with a whole family, Hilda and her six children who worked together as a very successful team. While Jan was a research student the family built a complete new block at the Mill House and rewired the whole place. As a result I was given the confidence and expertise to take on major DIY projects which I would never have done without Jan's help. In the lab his sister Sara helped us put up one inch copper piping with soldered Yorkshire fittings and his brother Dee is responsible for large amounts of woodwork in our house. However, there will be many who can testify to the success of the Evetts family, as a family. What I want to do is make clear what a wonderful scientist he was, and after his family, his priority was his scientific work. This was an astonishing combination of administrative skill, long term planning, manipulation of the University system and high quality research at the top international level. Five of his group obtained permanent positions in the Metallurgy Department, a unique achievement in my experience. He built up the largest superconductivity group in the UK, expanded to other areas, and there are many scientists all over the world, as well as many in Cambridge, who owe their careers to Jan. I have had messages from most of the top scientists in the field in many countries saying how much he achieved and how much he will be missed. However, what I am sure he would wish to be remembered for is the high quality of the research in which he was involved. In spite of the heavy administrative responsibilities of his group he was always most happy when discussing the details of new research. The papers which came from his group did not include his name because he was the leader. He was included because in most cases the original ideas and much of the detail came from Jan. So far as I am aware he made no enemies, which is unusual for someone at the top of his profession, and was respected by all. I would like to give a few details to show the range of his work. The paper I think is the most fundamental was his first in which he showed how Maxwell's equations should be adapted to describe magnetic fields in superconductors. This prompted a reply from Brian Josephson, the Nobel Prize winner, enclosing a paper of his on a similar topic, but I think Jan's treatment is more elegant. Maxwell's equations are the most fundamental equations in physics but until this work nobody had explained why they work in superconductors. Later his work became more materials-based and expanded into areas beyond superconductivity, such as magnetism. His group built up an enormous expertise in the production of thin films which allowed them to do very elegant experiments as well as develop important practical technologies. With the largest and most active superconductivity group in the UK it was largely due to Jan that when high Tc superconductors were discovered the UK's main centre for research into them was awarded to Cambridge. This created considerable problems for Jan as he was bringing in so much grant money that when he became part of the IRC his funding was actually reduced. He nevertheless has always been very supportive of the IRC and I have relied heavily on his advice and wisdom over the last eight years. One of his favourite topics from his thesis was force free configurations of flux lines and their breakdown as vortices cross each other. He was very pleased to be awarded an EPSRC grant a few months ago to return to this work with Mark Blamire and was obviously looking forward to doing some fundamental research. It would be a fitting memorial if this work produces the answer to a forty-year-old problem. He leaves a great gap and it is not only his family who will miss him terribly.'