Work-Based Curriculum to Broaden Learners' Participation in Science: Insights for Designers

NASA Astrophysics Data System (ADS)

Bopardikar, Anushree; Bernstein, Debra; Drayton, Brian; McKenney, Susan

2018-05-01

Around the globe, science education during compulsory schooling is envisioned for all learners regardless of their educational and career aspirations, including learners bound to the workforce upon secondary school completion. Yet, a major barrier in attaining this vision is low learner participation in secondary school science. Because curricula play a major role in shaping enacted learning, this study investigated how designers developed a high school physics curriculum with positive learning outcomes in learners with varied inclinations. Qualitative analysis of documents and semistructured interviews with the designers focused on the curriculum in different stages—from designers' ideas about learning goals to their vision for enactment to the printed materials—and on the design processes that brought them to fruition. This revealed designers' emphases on fostering workplace connections via learning goals and activities, and printed supports. The curriculum supported workplace-inspired, hands-on design-and-build projects, developed to address deeply a limited set of standards aligned learning goals. The curriculum also supported learners' interactions with relevant workplace professionals. To create these features, the designers reviewed other curricula to develop vision and printed supports, tested activities internally to assess content coverage, surveyed states in the USA receiving federal school-to-work grants and reviewed occupational information to choose unit topics and career contexts, and visited actual workplaces to learn about authentic praxis. Based on the worked example, this paper offers guidelines for designing work-based science curriculum products and processes that can serve the work of other designers, as well as recommendations for research serving designers and policymakers.

Assessment Matters: Some Issues Concerning the Supervision and Assessment of Work-Based Doctorates

ERIC Educational Resources Information Center

Johnson, David

2005-01-01

Since 2000, I have been working towards a professional doctorate at Middlesex University, and I am also working to introduce a work-based doctorate at Coventry University. This paper looks at the issues of supervision and assessment for work-based doctorates, which, I believe, are key to the design of such a programme and affect both the output…

Modelling and simulation of a robotic work cell

NASA Astrophysics Data System (ADS)

Sękala, A.; Gwiazda, A.; Kost, G.; Banaś, W.

2017-08-01

The subject of considerations presented in this work concerns the designing and simulation of a robotic work cell. The designing of robotic cells is the process of synergistic combining the components in the group, combining this groups into specific, larger work units or dividing the large work units into small ones. Combinations or divisions are carried out in the terms of the needs of realization the assumed objectives to be performed in these unit. The designing process bases on the integrated approach what lets to take into consideration all needed elements of this process. Each of the elements of a design process could be an independent design agent which could tend to obtain its objectives.

The cost risk implementation on design-build project of integrated public spaces child friendly in capital of Jakarta

NASA Astrophysics Data System (ADS)

Mardiaman, Mubarok, Abdul

2017-11-01

Jakarta area of 662.33 km2 with a population of 10,075,030 inhabitants and green open spaces 9.98%. The Jakarta government built a child-friendly integrated open space as facilities for playing. Providing of facilities was hoped suitable with time, cost, quality, accountability and proper financial governance. Based on the PU ministerial regulation number 19/PRT/M/2015 on the standards and guidelines for procurement the design and construction work on the integrated build and the PU ministerial regulation No. 07/PRT/M/2011 on standards and guidelines for procurement of construction works and consulting services of public works and the ministry of housing. RPTRA development at 123 locations in Jakarta was implemented base on the contract of design and build. The design study was influenced by the cost elements; the main strength (expert), skilled personnel, support personnel, major equipment and support. The construction fee relies on; expert implementation, hardware implementation, preparation work, land, buildings, courtyards, fences, complementary and governance capabilities for human resources in completing the construction activities to minimize the cost risk. Montecarlo simulations was conducted to determine the average unit price, model and analyze systems. In the cost contract, the percentage of design work stipulated 2.5%, build 97.5%. Base on regulation the minister of public work for design work cost 2.72%, build 97.28%. Then, actual cost for design 2.67% and build 97.33%. From the three reference was shown that there are differentiation one another. The acceleration of planning able to make the cost and time more efficient that impact on the implementation margin.

Participatory Design of an Integrated Information System Design to Support Public Health Nurses and Nurse Managers

PubMed Central

Reeder, Blaine; Hills, Rebecca A.; Turner, Anne M.; Demiris, George

2014-01-01

Objectives The objectives of the study were to use persona-driven and scenario-based design methods to create a conceptual information system design to support public health nursing. Design and Sample We enrolled 19 participants from two local health departments to conduct an information needs assessment, create a conceptual design, and conduct a preliminary design validation. Measures Interviews and thematic analysis were used to characterize information needs and solicit design recommendations from participants. Personas were constructed from participant background information, and scenario-based design was used to create a conceptual information system design. Two focus groups were conducted as a first iteration validation of information needs, personas, and scenarios. Results Eighty-nine information needs were identified. Two personas and 89 scenarios were created. Public health nurses and nurse managers confirmed the accuracy of information needs, personas, scenarios, and the perceived usefulness of proposed features of the conceptual design. Design artifacts were modified based on focus group results. Conclusion Persona-driven design and scenario-based design are feasible methods to design for common work activities in different local health departments. Public health nurses and nurse managers should be engaged in the design of systems that support their work. PMID:24117760

The design of PC/MISI, a PC-based common user interface to remote information storage and retrieval systems. Presentation visuals. M.S. Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

This Working Paper Series entry represents a collection of presentation visuals associated with the companion report entitled, The Design of PC/MISI, a PC-Based Common User Interface to Remote Information Storage and Retrieval Systems, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-15. The paper discusses the following: problem definition; the PC solution; the goals of system design; the design description; future considerations, the research environment; conclusions.

Towards Risk Based Design for NASA's Missions

NASA Technical Reports Server (NTRS)

Tumer, Irem Y.; Barrientos, Francesca; Meshkat, Leila

2004-01-01

This paper describes the concept of Risk Based Design in the context of NASA s low volume, high cost missions. The concept of accounting for risk in the design lifecycle has been discussed and proposed under several research topics, including reliability, risk analysis, optimization, uncertainty, decision-based design, and robust design. This work aims to identify and develop methods to enable and automate a means to characterize and optimize risk, and use risk as a tradeable resource to make robust and reliable decisions, in the context of the uncertain and ambiguous stage of early conceptual design. This paper first presents a survey of the related topics explored in the design research community as they relate to risk based design. Then, a summary of the topics from the NASA-led Risk Colloquium is presented, followed by current efforts within NASA to account for risk in early design. Finally, a list of "risk elements", identified for early-phase conceptual design at NASA, is presented. The purpose is to lay the foundation and develop a roadmap for future work and collaborations for research to eliminate and mitigate these risk elements in early phase design.

Beyond motivation: job and work design for development, health, ambidexterity, and more.

PubMed

Parker, Sharon K

2014-01-01

Much research shows it is possible to design motivating work, which has positive consequences for individuals and their organizations. This article reviews research that adopts this motivational perspective on work design, and it emphasizes that it is important to continue to refine motivational theories. In light of continued large numbers of poor-quality jobs, attention must also be given to influencing practice and policy to promote the effective implementation of enriched work designs. Nevertheless, current and future work-based challenges mean that designing work for motivation is necessary but insufficient. This review argues that work design can be a powerful vehicle for learning and development, for maintaining and enhancing employees' physical and mental health, and for achieving control and flexibility simultaneously (for example, in the form of ambidexterity); all these outcomes are important given the challenges in today's workplaces. The review concludes by suggesting methodological directions.

Scenarios, personas and user stories from design ethnography: Evidence-based design representations of communicable disease investigations

PubMed Central

Turner, Anne M; Reeder, Blaine; Ramey, Judith

2014-01-01

Purpose Despite years of effort and millions of dollars spent to create a unified electronic communicable disease reporting systems, the goal remains elusive. A major barrier has been a lack of understanding by system designers of communicable disease (CD) work and the public health workers who perform this work. This study reports on the application of User Center Design representations, traditionally used for improving interface design, to translate the complex CD work identified through ethnographic studies to guide designers and developers of CD systems. The purpose of this work is to: (1) better understand public health practitioners and their information workflow with respect to communicable disease (CD) monitoring and control at a local health department, and (2) to develop evidence-based design representations that model this CD work to inform the design of future disease surveillance systems. Methods We performed extensive onsite semi-structured interviews, targeted work shadowing and a focus group to characterize local health department communicable disease workflow. Informed by principles of design ethnography and user-centered design (UCD) we created persona, scenarios and user stories to accurately represent the user to system designers. Results We sought to convey to designers the key findings from ethnographic studies: 1) that public health CD work is mobile and episodic, in contrast to current CD reporting systems, which are stationary and fixed 2) health department efforts are focused on CD investigation and response rather than reporting and 3) current CD information systems must conform to PH workflow to ensure their usefulness. In an effort to illustrate our findings to designers, we developed three contemporary design-support representations: persona, scenario, and user story. Conclusions Through application of user centered design principles, we were able to create design representations that illustrate complex public health communicable disease workflow and key user characteristics to inform the design of CD information systems for public health. PMID:23618996

Improving Initial Assessment in Work-Based Learning.

ERIC Educational Resources Information Center

Green, Muriel

This document, which is designed to assist managers, trainers, or assessors in work-based provision across the United Kingdom, shares the experiences of five work-based learning providers that sought to improve their initial assessment processes. Section 1 explains the purpose of initial assessment and presents guidelines for evaluating intake…

Participatory design of an integrated information system design to support public health nurses and nurse managers.

PubMed

Reeder, Blaine; Hills, Rebecca A; Turner, Anne M; Demiris, George

2014-01-01

The objectives of the study were to use persona-driven and scenario-based design methods to create a conceptual information system design to support public health nursing. We enrolled 19 participants from two local health departments to conduct an information needs assessment, create a conceptual design, and conduct a preliminary design validation. Interviews and thematic analysis were used to characterize information needs and solicit design recommendations from participants. Personas were constructed from participant background information, and scenario-based design was used to create a conceptual information system design. Two focus groups were conducted as a first iteration validation of information needs, personas, and scenarios. Eighty-nine information needs were identified. Two personas and 89 scenarios were created. Public health nurses and nurse managers confirmed the accuracy of information needs, personas, scenarios, and the perceived usefulness of proposed features of the conceptual design. Design artifacts were modified based on focus group results. Persona-driven design and scenario-based design are feasible methods to design for common work activities in different local health departments. Public health nurses and nurse managers should be engaged in the design of systems that support their work. © 2013 Wiley Periodicals, Inc.

Participatory design in lean production: which contribution from employees? For what end?

PubMed

Perez Toralla, M S; Falzon, P; Morais, A

2012-01-01

The proponents of lean production have pointed to the positive effects of the work organization on employees in terms of autonomy, enhanced skills and empowerment mainly by their participation into the continuous improvement of work process. But studies that have examined this issue suggest that the increase in autonomy is not sufficient to compensate for increases work intensity. Participatory design has grown extensively in manufacturing since the 1980's under the impulsion of the Scandinavian socio-technical system approach and it's central in the model of lean production performance. Its main objectives are to improve quality, increase productivity and safety through employee's participation to the reduction of non-value added activities, such as defined by lean production. In the line of the studies on participatory design and continuous improvement the present study examines the functioning of work groups, based on the kaizen model, the aim of which was to improve the proportion of "value-added activities" and working conditions, essentially physical constraints. The main results are consistent with the literature and show that accelerated forms of re-conception activities give employees limited room for maneuver to elaborate solutions based on the analysis of the real activity. This study is part of a broader initiative that goes in the direction of continuous improvement of the design process itself so that it integrates the real constraints of work and propose changes bases on work as it actually takes place, beyond pre-established performance goals bases on the reduction of "non added value activities".

Participatory design of a collaborative clinical trial protocol writing system.

PubMed

Weng, Chunhua; McDonald, David W; Sparks, Dana; McCoy, Jason; Gennari, John H

2007-06-01

To explore concrete approaches to socio-technical design of collaborative healthcare information systems and to design a groupware technology for collaborative clinical trial protocol writing. We conducted "quick and dirty ethnography" through semi-structured interviews, observational studies, and work artifacts analysis to understand the group work for protocol development. We used participatory design through evolutionary prototyping to explore the feature space of a collaborative writing system. Our design strategies include role-based user advocacy, formative evaluation, and change management. Quick and dirty ethnography helped us efficiently understand relevant work practice, and participatory design helped us engage users into design and bring out their tacit work knowledge. Our approach that intertwined both techniques helped achieve a "work-informed and user-oriented" design. This research leads to a collaborative writing system that supports in situ communication, group awareness, and effective work progress tracking. The usability evaluation results have been satisfactory. The system design is being transferred to an organizational tool for daily use.

Working Conditions: Job Design. Working Paper #4.

ERIC Educational Resources Information Center

Gersten, Russell; And Others

This summary report presents an integration of findings on teachers' perceptions of their working conditions, based on survey and interview data from special educators in six large urban school districts. Emphasis is on perceptions of problems related to job design, the highly interrelated set of structures, systems, and processes intended to…

Scenarios, personas and user stories: user-centered evidence-based design representations of communicable disease investigations.

PubMed

Turner, Anne M; Reeder, Blaine; Ramey, Judith

2013-08-01

Despite years of effort and millions of dollars spent to create unified electronic communicable disease reporting systems, the goal remains elusive. A major barrier has been a lack of understanding by system designers of communicable disease (CD) work and the public health workers who perform this work. This study reports on the application of user-centered design representations, traditionally used for improving interface design, to translate the complex CD work identified through ethnographic studies to guide designers and developers of CD systems. The purpose of this work is to: (1) better understand public health practitioners and their information workflow with respect to CD monitoring and control at a local health agency, and (2) to develop evidence-based design representations that model this CD work to inform the design of future disease surveillance systems. We performed extensive onsite semi-structured interviews, targeted work shadowing and a focus group to characterize local health agency CD workflow. Informed by principles of design ethnography and user-centered design we created persona, scenarios and user stories to accurately represent the user to system designers. We sought to convey to designers the key findings from ethnographic studies: (1) public health CD work is mobile and episodic, in contrast to current CD reporting systems, which are stationary and fixed, (2) health agency efforts are focused on CD investigation and response rather than reporting and (3) current CD information systems must conform to public health workflow to ensure their usefulness. In an effort to illustrate our findings to designers, we developed three contemporary design-support representations: persona, scenario, and user story. Through application of user-centered design principles, we were able to create design representations that illustrate complex public health communicable disease workflow and key user characteristics to inform the design of CD information systems for public health. Copyright © 2013 Elsevier Inc. All rights reserved.

Interior Design Education within a Human Ecological Framework

ERIC Educational Resources Information Center

Kaup, Migette L.; Anderson, Barbara G.; Honey, Peggy

2007-01-01

An education based in human ecology can greatly benefit interior designers as they work to understand and improve the human condition. Design programs housed in colleges focusing on human ecology can improve the interior design profession by taking advantage of their home base and emphasizing the human ecological framework in the design curricula.…

Modeling and Simulation for Mission Operations Work System Design

NASA Technical Reports Server (NTRS)

Sierhuis, Maarten; Clancey, William J.; Seah, Chin; Trimble, Jay P.; Sims, Michael H.

2003-01-01

Work System analysis and design is complex and non-deterministic. In this paper we describe Brahms, a multiagent modeling and simulation environment for designing complex interactions in human-machine systems. Brahms was originally conceived as a business process design tool that simulates work practices, including social systems of work. We describe our modeling and simulation method for mission operations work systems design, based on a research case study in which we used Brahms to design mission operations for a proposed discovery mission to the Moon. We then describe the results of an actual method application project-the Brahms Mars Exploration Rover. Space mission operations are similar to operations of traditional organizations; we show that the application of Brahms for space mission operations design is relevant and transferable to other types of business processes in organizations.

Task-Analytic Design of Graphic Presentations

DTIC Science & Technology

1990-05-18

important premise of Larkin and Simon’s work is that, when comparing alternative presentations, it is fruitful to characterize graphic-based problem solving...using the same information-processing models used to help understand problem solving using other representations [Newell and Simon, 19721...luring execution of graphic presentation- 4 based problem -solving procedures. Chapter 2 reviews other work related to the problem of designing graphic

The Effectiveness of Keyword-Based Instruction in Enhancing English Vocabulary Achievement and Retention of Intermediate Stage Pupils with Different Working Memory Capacities

ERIC Educational Resources Information Center

Al-Zahrani, Mona Abdullah Bakheet

2011-01-01

The current study aimed at investigating the effectiveness of keyword-based instruction in enhancing English vocabulary achievement and retention of intermediate stage pupils with different working memory capacities. The study adopted a quasi experimental design employing two groups (experimental and control). The design included an independent…

Teaching Habitat and Animal Classification to Fourth Graders Using an Engineering-Design Model

ERIC Educational Resources Information Center

Marulcu, Ismail

2014-01-01

Background: The motivation for this work is built upon the premise that there is a need for research-based materials for design-based science instruction. In this paper, a small portion of our work investigating the impact of a LEGO[TM] engineering unit on fourth grade students' preconceptions and understanding of animals is presented. Purpose:…

Characterising Extrinsic Challenges Linked to the Design and Implementation of Inquiry-Based Practical Work

NASA Astrophysics Data System (ADS)

Akuma, Fru Vitalis; Callaghan, Ronel

2017-11-01

Inquiry-based science education has been incorporated in science curricula internationally. In this regard, however, many teachers encounter challenges. The challenges have been characterised into those linked to the personal characteristics of these teachers (intrinsic challenges) and others associated with contextual factors (extrinsic challenges). However, this level of characterisation is inadequate in terms of appreciating the complexity of the challenges, tracking of their development, and discovering knowledge within specific categories. Against this background, the purpose of the research presented here was to characterise extrinsic challenges linked to the design and implementation of inquiry-based practical work. In order to do so, we used a conceptual framework of teaching challenges based on Bronfenbrenner's ecological theory of human development. The data gathered using a multi-method case study of practical work in two South African high schools, was analysed by combining the data-driven inductive approach and the deductive a priori template of codes approach in thematic analysis. On this basis, the extrinsic challenges linked to the design and implementation of inquiry-based practical work that participants are confronted with, were found to consist of macrosystem challenges (such as a restrictive curriculum) and microsystem challenges. At the latter level, the challenges are material-related (e.g., lack of science education equipment and materials) or non-material-related (such as time constraints and the lack of access to interactive computer simulations). We have discussed the theory-, practice- and research-based implications of these results in relation to the design and implementation of inquiry-based practical work in South Africa and internationally.

School to Work Fact Sheets: Making School to Work Opportunities Happen for Youth with Disabilities.

ERIC Educational Resources Information Center

Horne, Richard L.; Thuli, Kelli J.

These six fact sheets are designed to communicate strategies for serving all youth, especially youth with disabilities, in school to work programs: (1) "Overview of the School-to-Work Opportunities Act" briefly describes this 1994 federal law and the three components of school-to-work programs: school-based learning, work-based learning,…

Automated platform for designing multiple robot work cells

NASA Astrophysics Data System (ADS)

Osman, N. S.; Rahman, M. A. A.; Rahman, A. A. Abdul; Kamsani, S. H.; Bali Mohamad, B. M.; Mohamad, E.; Zaini, Z. A.; Rahman, M. F. Ab; Mohamad Hatta, M. N. H.

2017-06-01

Designing the multiple robot work cells is very knowledge-intensive, intricate, and time-consuming process. This paper elaborates the development process of a computer-aided design program for generating the multiple robot work cells which offer a user-friendly interface. The primary purpose of this work is to provide a fast and easy platform for less cost and human involvement with minimum trial and errors adjustments. The automated platform is constructed based on the variant-shaped configuration concept with its mathematical model. A robot work cell layout, system components, and construction procedure of the automated platform are discussed in this paper where integration of these items will be able to automatically provide the optimum robot work cell design according to the information set by the user. This system is implemented on top of CATIA V5 software and utilises its Part Design, Assembly Design, and Macro tool. The current outcomes of this work provide a basis for future investigation in developing a flexible configuration system for the multiple robot work cells.

Ethical and Organisational Tensions for Work-Based Learners

ERIC Educational Resources Information Center

Moore, Lesley J.

2007-01-01

Purpose: This paper aims to focus on examples of the perceived tensions of the healthcare work-based learners as they experienced paradigm shifts in both practice and education. Design/methodology/approach: Examples are drawn from a qualitative study to examine work-based learning (WBL) workshops in a Dutch healthcare setting, and a developmental…

Ergonomic design intervention strategy for work tools development for women agro based workers in Northeast India.

PubMed

Chakrabarti, Debkumar; Bhattachheriya, Nandita

2012-01-01

Strategy for finding the appropriate strategy for work tool development has become a crucial issue in occupational wellness of varied nature of women workforce of Northeast India. This paper deals with ergonomics intervention through sustainable work tool design development process. Workers who frequently shift to different activities quite often in unorganised small-scale fruit processing units where productivity is directly related to the harvesting season require different work tools relevant to specific tasks and mostly workers themselves manage work tools of their own with available local resources. Whereas in contrast the tea-leaf pluckers are engaged in a single task throughout the year, and the work schedule and work equipment is decided and supplied to them based on the corporate decision where the workers do not have any individual control. Observations confirm the need for organising participatory workshops specific to trade based occupational well-being and different work tools for different tasks in mostly private owned unorganised sector. Implementation of single variety work tool development that supports a crucial component in tea-leaf plucking for which they are engaged in full time employment; and through a corporate decision a single design with its number of users makes a good effect.

Practice Ethical Behavior. Work Maturity Skills. Competency 4.0.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

Designed for use as a part of the Work Maturity Skills Training Program, this unit consists of instructional materials dealing with practicing ethical behavior. (The Work Maturity Skills Training Program is a set of individualized competency-based units that are designed to help participants develop the competencies they need to find and retain…

Design Considerations of Help Options in Computer-Based L2 Listening Materials Informed by Participatory Design

ERIC Educational Resources Information Center

Cárdenas-Claros, Mónica Stella

2015-01-01

This paper reports on the findings of two qualitative exploratory studies that sought to investigate design features of help options in computer-based L2 listening materials. Informed by principles of participatory design, language learners, software designers, language teachers, and a computer programmer worked collaboratively in a series of…

Designing intuitive dialog boxes in Windows environments

NASA Astrophysics Data System (ADS)

Souetova, Natalia

2000-01-01

There were analyzed some approaches to user interface design. Most existing interfaces seem to be difficult for understanding and studying for newcomers. There were defined some ways for designing interfaces based on psychology of computer image perception and experience got while working with artists and designers without special technique education. Some applications with standard Windows interfaces, based on these results, were developed. Windows environment was chosen because they are very popular now. This increased quality and speed of users' job and reduced quantity of troubles and mistakes. Now high-qualified employers do not spend their working time for explanation and help.

Designing Work, Family & Health Organizational Change Initiatives.

PubMed

Kossek, Ellen Ernst; Hammer, Leslie B; Kelly, Erin L; Moen, Phyllis

2014-01-01

For decades, leaders and scholars have been advocating change efforts to improve work-life relationships. Yet most initiatives have lacked rigor and not been developed using scientific principles. This has created an evidence gap for employer support of work and personal life as a win-win for productivity and employees' well-being. This paper examines the approach used by the U.S. Work Family Health Network (WFRN) to develop an innovative workplace intervention to improve employee and family health. The change initiative was designed to reduce organizationally based work-family conflict in two contrasting contexts representative of major segments of today's U.S. workforce: health care employees and informational technology professionals. The WFRN Intervention (called STAR) had three theoretically based change elements. They were: 1) increase job control over work time and schedule; 2) increase supervisor social support for family and job effectiveness; and 3) improve organizational culture and job design processes to foster results orientation. Seven practical lessons for developing work-life interventions emerged from this groundbreaking endeavor.

Designing Work, Family & Health Organizational Change Initiatives

PubMed Central

Hammer, Leslie B.; Kelly, Erin L.; Moen, Phyllis

2014-01-01

Executive Summary For decades, leaders and scholars have been advocating change efforts to improve work-life relationships. Yet most initiatives have lacked rigor and not been developed using scientific principles. This has created an evidence gap for employer support of work and personal life as a win–win for productivity and employees’ well-being. This paper examines the approach used by the U.S. Work Family Health Network (WFRN) to develop an innovative workplace intervention to improve employee and family health. The change initiative was designed to reduce organizationally based work-family conflict in two contrasting contexts representative of major segments of today’s U.S. workforce: health care employees and informational technology professionals. The WFRN Intervention (called STAR) had three theoretically based change elements. They were: 1) increase job control over work time and schedule; 2) increase supervisor social support for family and job effectiveness; and 3) improve organizational culture and job design processes to foster results orientation. Seven practical lessons for developing work-life interventions emerged from this groundbreaking endeavor. PMID:24683279

From the Reality of Work to Grounded Work-Based Learning in German Vocational Education and Training: Background, Concept and Tools

ERIC Educational Resources Information Center

Gessler, Michael; Howe, Falk

2015-01-01

The "Riga Conclusions" of the European Ministries of Education of 22 June 2015 for the orientation of vocational education and training in Europe are promoting work-based learning as one of five "medium-term deliverables" for the next five years. But: How should and can work-based teaching and learning be designed? Our approach…

Work-Based Mentor Training for Pennsylvania's School-to-Work System. Final Report.

ERIC Educational Resources Information Center

Walker, Thomas J.; And Others

Three Pennsylvania universities focused on defining the functional role and identifying the training needs of work-based mentors for Pennsylvania's system of school-to-work transition, in order to design a training protocol. Interviews were conducted with 81 experienced employees concerning their view of the mentoring role and the activities that…

The Design and Transfer of Advanced Command and Control (C2) Computer-Based Systems

DTIC Science & Technology

1980-03-31

TECHNICAL REPORT 80-02 QUARTERLY TECHNICAL REPORT: THE DESIGN AND TRANSFER OF ADVANCED COMMAND AND CONTROL (C 2 ) COMPUTER-BASED SYSTEMS ARPA...The Tasks/Objectives and/or Purposes of the overall project are connected with the design , development, demonstration and transfer of advanced...command and control (C2 ) computer-based systems; this report covers work in the computer-based design and transfer areas only. The Technical Problems thus

Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis

PubMed Central

Miller, Matthew James; McGuire, Kerry M.; Feigh, Karen M.

2016-01-01

The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity. The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design. PMID:28491008

Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis.

PubMed

Miller, Matthew James; McGuire, Kerry M; Feigh, Karen M

2017-06-01

The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity . The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design.

User Preferences for Web-Based Module Design Layout and Design Impact on Information Recall Considering Age

ERIC Educational Resources Information Center

Pomales-García, Cristina; Rivera-Nivar, Mericia

2015-01-01

Research in design of Web-based modules should incorporate aging as an important factor given the diversity of the current workforce. This work aims to understand how Web-Based Learning modules can be designed to accommodate young (25-35 years) as well as older (55-65 years) users by: (1) identifying how information sources (instructor video,…

Designing Social Media for Informal Learning and Knowledge Maturing in the Digital Workplace

ERIC Educational Resources Information Center

Ravenscroft, A.; Schmidt, A.; Cook, J.; Bradley, C.

2012-01-01

This paper presents an original approach to designing social media that support informal learning in the digital workplace. It adapts design-based research to take into account the embeddedness of interactions within digitally mediated work-based contexts. The approach is demonstrated through the design, implementation, and evaluation of software…

Incorporating Solid Modeling and Team-Based Design into Freshman Engineering Graphics.

ERIC Educational Resources Information Center

Buchal, Ralph O.

2001-01-01

Describes the integration of these topics through a major team-based design and computer aided design (CAD) modeling project in freshman engineering graphics at the University of Western Ontario. Involves n=250 students working in teams of four to design and document an original Lego toy. Includes 12 references. (Author/YDS)

Pedagogy of Work-Based Learning: The Role of the Learning Group

ERIC Educational Resources Information Center

Siebert, Sabina; Mills, Vince; Tuff, Caroline

2009-01-01

Purpose: The aim of this paper is to evaluate the role of learning from participation in a group of work-based learners. Design/methodology/approach: This study relies on qualitative data obtained from a survey of perspectives of students on two work-based learning programmes. A group of 16 undergraduate and seven postgraduate students…

Nursing staff's experiences of working in an evidence-based designed ICU patient room-An interview study.

PubMed

Sundberg, Fredrika; Olausson, Sepideh; Fridh, Isabell; Lindahl, Berit

2017-12-01

It has been known for centuries that environment in healthcare has an impact, but despite this, environment has been overshadowed by technological and medical progress, especially in intensive care. Evidence-based design is a concept concerning integrating knowledge from various research disciplines and its application to healing environments. The aim was to explore the experiences of nursing staff of working in an evidence-based designed ICU patient room. Interviews were carried out with eight critical care nurses and five assistant nurses and then subjected to qualitative content analysis. The experience of working in an evidence-based designed intensive care unit patient room was that the room stimulates alertness and promotes wellbeing in the nursing staff, fostering their caring activities but also that the interior design of the medical and technical equipment challenges nursing actions. The room explored in this study had been rebuilt in order to create and evaluate a healing environment. This study showed that the new environment had a great impact on the caring staffs' wellbeing and their caring behaviour. At a time when turnover in nurses is high and sick leave is increasing, these findings show the importance of interior design ofintensive care units. Copyright © 2017 Elsevier Ltd. All rights reserved.

Adapting Cognitive Walkthrough to Support Game Based Learning Design

ERIC Educational Resources Information Center

Farrell, David; Moffat, David C.

2014-01-01

For any given Game Based Learning (GBL) project to be successful, the player must learn something. Designers may base their work on pedagogical research, but actual game design is still largely driven by intuition. People are famously poor at unsupported methodical thinking and relying so much on instinct is an obvious weak point in GBL design…

Development of Learning Resources to Promote Knowledge Sharing in Problem Based Learning

ERIC Educational Resources Information Center

Uden, Lorna; Page, Tom

2008-01-01

Problem Based Learning offers many benefits to students' learning, however, the design and implementation of effective problem based learning (PBL) is not trivial. Central to effective implementation of PBL are the problem design and group working of the students. Design of good problems requires that the learning outcomes of the subject are…

A comparison of design variables for control theory based airfoil optimization

NASA Technical Reports Server (NTRS)

Reuther, James; Jameson, Antony

1995-01-01

This paper describes the implementation of optimization techniques based on control theory for airfoil design. In our previous work in the area it was shown that control theory could be employed to devise effective optimization procedures for two-dimensional profiles by using either the potential flow or the Euler equations with either a conformal mapping or a general coordinate system. We have also explored three-dimensional extensions of these formulations recently. The goal of our present work is to demonstrate the versatility of the control theory approach by designing airfoils using both Hicks-Henne functions and B-spline control points as design variables. The research also demonstrates that the parameterization of the design space is an open question in aerodynamic design.

Design of mathematical models assessment of working achievements based on spencer competency in PT. Z

NASA Astrophysics Data System (ADS)

Siregar, K.; Siregar, S. F.

2018-02-01

This research is design employee performance assessment by considering work result of employee based on competency. Relevant competencies are identified according to Spencer’s competence of employees that subsequently processed by Analytical Hierarchy Process (AHP) method. The results of weighting AHP indicate the highest priority order of criteria, there are; concern of customer satisfaction (0.1325), group work (0.1324) and technical expertise (0.0826). The weight of the criteria is used to design the Work Performance Value (WPV) to be used as the basis for calculating the incentive index. The higher incentive index of an employee, the greater amount of incentives was earned. The calculation of incentives is made to four employees of chopsticks production. From employee incentives A, B, C and D, employee D has the highest incentive index and increment of IDR 2,700,675 compared to previous incentive system. The incentive division system based on the Work Performance Values (WPV) of this proposal reflects a real incentive so that the incapacity of incentive can be reduced.

Balancing Work and Family. A Working Curriculum To Assist Vocational Parent and Family Educators in Designing and Delivering Employer-Sponsored Work and Family Seminars.

ERIC Educational Resources Information Center

Burns, Mary Dooley; And Others

This curriculum guide was developed to help vocational teachers and family educators to design and deliver employer-sponsored seminars for employees as well as community-based adult education programs. The curriculum is intended to help working parents improve their ability to meet their personal wants and needs as well as the demands of their…

Diode Laser Sensor for Scramjet Inlet

DTIC Science & Technology

2010-05-11

This work presents the development of an oxygen -based diode laser absorption sensor designed to be used in a supersonic combustion ramjet engine inlet...ADFA Abstract This work presents development of an oxygen -based diode laser absorption sensor designed to be used in a supersonic combustion ramjet... sensor needs to use oxygen as the absorbing species, as this is the only option for absorption measurements in inlet air. Oxygen absorption lines

A Darwinian approach to control-structure design

NASA Technical Reports Server (NTRS)

Zimmerman, David C.

1993-01-01

Genetic algorithms (GA's), as introduced by Holland (1975), are one form of directed random search. The form of direction is based on Darwin's 'survival of the fittest' theories. GA's are radically different from the more traditional design optimization techniques. GA's work with a coding of the design variables, as opposed to working with the design variables directly. The search is conducted from a population of designs (i.e., from a large number of points in the design space), unlike the traditional algorithms which search from a single design point. The GA requires only objective function information, as opposed to gradient or other auxiliary information. Finally, the GA is based on probabilistic transition rules, as opposed to deterministic rules. These features allow the GA to attack problems with local-global minima, discontinuous design spaces and mixed variable problems, all in a single, consistent framework.

An analytical approach to test and design upper limb prosthesis.

PubMed

Veer, Karan

2015-01-01

In this work the signal acquiring technique, the analysis models and the design protocols of the prosthesis are discussed. The different methods to estimate the motion intended by the amputee from surface electromyogram (SEMG) signals based on time and frequency domain parameters are presented. The experiment proposed that the used techniques can help significantly in discriminating the amputee's motions among four independent activities using dual channel set-up. Further, based on experimental results, the design and working of an artificial arm have been covered under two constituents--the electronics design and the mechanical assembly. Finally, the developed hand prosthesis allows the amputated persons to perform daily routine activities easily.

Collective Efficacy and Its Relationship with Leadership in a Computer-Mediated Project-Based Group Work

ERIC Educational Resources Information Center

Huh, Yeol; Reigeluth, Charles M.; Lee, Dabae

2014-01-01

Based on Bandura's work, the four sources of efficacy shaping were examined in regard to frequency and students' perception of importance in a computer-mediated, project-based high school classroom. In a context of group work where there was no designated leader, groups' collective efficacy was examined if it has any relationship with individual's…

Multi-Cultural Competency-Based Vocational Curricula. Machine Trades. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Hepburn, Larry; Shin, Masako

This document, one of eight in a multi-cultural competency-based vocational/technical curricula series, is on machine trades. This program is designed to run 36 weeks and cover 6 instructional areas: use of measuring tools; benchwork/tool bit grinding; lathe work; milling work; precision grinding; and combination machine work. A duty-task index…

Effects of Performance-Based Financial Incentives on Work Performance: A Study of Technical-Level Employees in the Private Sector in Sri Lanka

ERIC Educational Resources Information Center

Wickramasinghe, Vathsala; Dabere, Sampath

2012-01-01

The objective of the study is to investigate the effect of performance-based financial incentives on work performance. The study hypothesized that the design features of performance-based financial incentive schemes themselves may influence individuals' work performance. For the study, survey methodology was used and 93 technical-level employees…

The role of optimization in the next generation of computer-based design tools

NASA Technical Reports Server (NTRS)

Rogan, J. Edward

1989-01-01

There is a close relationship between design optimization and the emerging new generation of computer-based tools for engineering design. With some notable exceptions, the development of these new tools has not taken full advantage of recent advances in numerical design optimization theory and practice. Recent work in the field of design process architecture has included an assessment of the impact of next-generation computer-based design tools on the design process. These results are summarized, and insights into the role of optimization in a design process based on these next-generation tools are presented. An example problem has been worked out to illustrate the application of this technique. The example problem - layout of an aircraft main landing gear - is one that is simple enough to be solved by many other techniques. Although the mathematical relationships describing the objective function and constraints for the landing gear layout problem can be written explicitly and are quite straightforward, an approximation technique has been used in the solution of this problem that can just as easily be applied to integrate supportability or producibility assessments using theory of measurement techniques into the design decision-making process.

Teaching Database Design with Constraint-Based Tutors

ERIC Educational Resources Information Center

Mitrovic, Antonija; Suraweera, Pramuditha

2016-01-01

Design tasks are difficult to teach, due to large, unstructured solution spaces, underspecified problems, non-existent problem solving algorithms and stopping criteria. In this paper, we comment on our approach to develop KERMIT, a constraint-based tutor that taught database design. In later work, we re-implemented KERMIT as EER-Tutor, and…

Linking First-Year and Senior Engineering Design Teams: Engaging Early Academic Career Students in Engineering Design

ERIC Educational Resources Information Center

Fox, Garey A.; Weckler, Paul; Thomas, Dan

2015-01-01

In Biosystems Engineering at Oklahoma State University, senior design is a two semester course in which students work on real-world projects provided by clients. First-year (freshmen and trans­fer) students enroll in an introductory engineering course. Historically, these students worked on a team-based analysis project, and the engineering design…

[Optimum design of imaging spectrometer based on toroidal uniform-line-spaced (TULS) spectrometer].

PubMed

Xue, Qing-Sheng; Wang, Shu-Rong

2013-05-01

Based on the geometrical aberration theory, a optimum-design method for designing an imaging spectrometer based on toroidal uniform grating spectrometer is proposed. To obtain the best optical parameters, twice optimization is carried out using genetic algorithm(GA) and optical design software ZEMAX A far-ultraviolet(FUV) imaging spectrometer is designed using this method. The working waveband is 110-180 nm, the slit size is 50 microm x 5 mm, and the numerical aperture is 0.1. Using ZEMAX software, the design result is analyzed and evaluated. The results indicate that the MTF for different wavelengths is higher than 0.7 at Nyquist frequency 10 lp x mm(-1), and the RMS spot radius is less than 14 microm. The good imaging quality is achieved over the whole working waveband, the design requirements of spatial resolution 0.5 mrad and spectral resolution 0.6 nm are satisfied. It is certificated that the optimum-design method proposed in this paper is feasible. This method can be applied in other waveband, and is an instruction method for designing grating-dispersion imaging spectrometers.

Performance evaluation of a lossy transmission lines based diode detector at cryogenic temperature.

PubMed

Villa, E; Aja, B; de la Fuente, L; Artal, E

2016-01-01

This work is focused on the design, fabrication, and performance analysis of a square-law Schottky diode detector based on lossy transmission lines working under cryogenic temperature (15 K). The design analysis of a microwave detector, based on a planar gallium-arsenide low effective Schottky barrier height diode, is reported, which is aimed for achieving large input return loss as well as flat sensitivity versus frequency. The designed circuit demonstrates good sensitivity, as well as a good return loss in a wide bandwidth at Ka-band, at both room (300 K) and cryogenic (15 K) temperatures. A good sensitivity of 1000 mV/mW and input return loss better than 12 dB have been achieved when it works as a zero-bias Schottky diode detector at room temperature, increasing the sensitivity up to a minimum of 2200 mV/mW, with the need of a DC bias current, at cryogenic temperature.

Work boot design affects the way workers walk: A systematic review of the literature.

PubMed

Dobson, Jessica A; Riddiford-Harland, Diane L; Bell, Alison F; Steele, Julie R

2017-05-01

Safety boots are compulsory in many occupations to protect the feet of workers from undesirable external stimuli, particularly in harsh work environments. The unique environmental conditions and varying tasks performed in different occupations necessitate a variety of boot designs to match each worker's occupational safety and functional requirements. Unfortunately, safety boots are often designed more for occupational safety at the expense of functionality and comfort. In fact, there is a paucity of published research investigating the influence that specific variations in work boot design have on fundamental tasks common to many occupations, such as walking. This literature review aimed to collate and examine what is currently known about the influence of boot design on walking in order to identify gaps in the literature and develop evidence-based recommendations upon which to design future research studies investigating work boot design. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessing the 'system' in safe systems-based road designs: using cognitive work analysis to evaluate intersection designs.

PubMed

Cornelissen, M; Salmon, P M; Stanton, N A; McClure, R

2015-01-01

While a safe systems approach has long been acknowledged as the underlying philosophy of contemporary road safety strategies, systemic applications are sparse. This article argues that systems-based methods from the discipline of Ergonomics have a key role to play in road transport design and evaluation. To demonstrate, the Cognitive Work Analysis framework was used to evaluate two road designs - a traditional Melbourne intersection and a cut-through design for future intersections based on road safety safe systems principles. The results demonstrate that, although the cut-through intersection appears different in layout from the traditional intersection, system constraints are not markedly different. Furthermore, the analyses demonstrated that redistribution of constraints in the cut-through intersection resulted in emergent behaviour, which was not anticipated and could prove problematic. Further, based on the lack of understanding of emergent behaviour, similar design induced problems are apparent across both intersections. Specifically, incompatibilities between infrastructure, vehicles and different road users were not dealt with by the proposed design changes. The importance of applying systems methods in the design and evaluation of road transport systems is discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

PubMed

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

Higher Education Institutions and Work-Based Learning in the UK: Employer Engagement within a Tripartite Relationship

ERIC Educational Resources Information Center

Basit, Tehmina N.; Eardley, Alan; Borup, Rosemary; Shah, Hanifa; Slack, Kim; Hughes, Amanda

2015-01-01

Higher education institutions (HEIs) in the UK are increasingly engaging in work-based learning. The tripartite relationship between the HEI, the employer and the employee is viewed to be of great significance in work-based learning, not only in the initial stages of procurement of a contract, but also in designing and delivering the programme to…

Virtual Reality Based Support System for Layout Planning and Programming of an Industrial Robotic Work Cell

PubMed Central

Yap, Hwa Jen; Taha, Zahari; Md Dawal, Siti Zawiah; Chang, Siow-Wee

2014-01-01

Traditional robotic work cell design and programming are considered inefficient and outdated in current industrial and market demands. In this research, virtual reality (VR) technology is used to improve human-robot interface, whereby complicated commands or programming knowledge is not required. The proposed solution, known as VR-based Programming of a Robotic Work Cell (VR-Rocell), consists of two sub-programmes, which are VR-Robotic Work Cell Layout (VR-RoWL) and VR-based Robot Teaching System (VR-RoT). VR-RoWL is developed to assign the layout design for an industrial robotic work cell, whereby VR-RoT is developed to overcome safety issues and lack of trained personnel in robot programming. Simple and user-friendly interfaces are designed for inexperienced users to generate robot commands without damaging the robot or interrupting the production line. The user is able to attempt numerous times to attain an optimum solution. A case study is conducted in the Robotics Laboratory to assemble an electronics casing and it is found that the output models are compatible with commercial software without loss of information. Furthermore, the generated KUKA commands are workable when loaded into a commercial simulator. The operation of the actual robotic work cell shows that the errors may be due to the dynamics of the KUKA robot rather than the accuracy of the generated programme. Therefore, it is concluded that the virtual reality based solution approach can be implemented in an industrial robotic work cell. PMID:25360663

Virtual reality based support system for layout planning and programming of an industrial robotic work cell.

PubMed

Yap, Hwa Jen; Taha, Zahari; Dawal, Siti Zawiah Md; Chang, Siow-Wee

2014-01-01

Traditional robotic work cell design and programming are considered inefficient and outdated in current industrial and market demands. In this research, virtual reality (VR) technology is used to improve human-robot interface, whereby complicated commands or programming knowledge is not required. The proposed solution, known as VR-based Programming of a Robotic Work Cell (VR-Rocell), consists of two sub-programmes, which are VR-Robotic Work Cell Layout (VR-RoWL) and VR-based Robot Teaching System (VR-RoT). VR-RoWL is developed to assign the layout design for an industrial robotic work cell, whereby VR-RoT is developed to overcome safety issues and lack of trained personnel in robot programming. Simple and user-friendly interfaces are designed for inexperienced users to generate robot commands without damaging the robot or interrupting the production line. The user is able to attempt numerous times to attain an optimum solution. A case study is conducted in the Robotics Laboratory to assemble an electronics casing and it is found that the output models are compatible with commercial software without loss of information. Furthermore, the generated KUKA commands are workable when loaded into a commercial simulator. The operation of the actual robotic work cell shows that the errors may be due to the dynamics of the KUKA robot rather than the accuracy of the generated programme. Therefore, it is concluded that the virtual reality based solution approach can be implemented in an industrial robotic work cell.

Information Presentation

NASA Technical Reports Server (NTRS)

Holden, Kritina L.; Thompson, Shelby G.; Sandor, Aniko; McCann, Robert S.; Kaiser, Mary K.; Adelstein, Barnard D.; Begault, Durand R.; Beutter, Brent R.; Stone, Leland S.; Godfroy, Martine

2009-01-01

The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew. In addition to addressing display design issues associated with information formatting, style, layout, and interaction, the Information Presentation DRP is also working toward understanding the effects of extreme environments encountered in space travel on information processing. Work is also in progress to refine human factors-based design tools, such as human performance modeling, that will supplement traditional design techniques and help ensure that optimal information design is accomplished in the most cost-efficient manner. The major areas of work, or subtasks, within the Information Presentation DRP for FY10 are: 1) Displays, 2) Controls, 3) Procedures and Fault Management, and 4) Human Performance Modeling. The poster will highlight completed and planned work for each subtask.

Using a Game Environment to Foster Collaborative Learning: A Design-Based Study

ERIC Educational Resources Information Center

Hamalainen, Raija

2011-01-01

Designing collaborative three-dimensional learning games for vocational learning may be one way to respond to the needs of working life. The theoretical vantage points of collaborative learning for game development and the "design-based research" methodology are described; these have been used to support collaborative learning in the…

Design Oriented Structural Modeling for Airplane Conceptual Design Optimization

NASA Technical Reports Server (NTRS)

Livne, Eli

1999-01-01

The main goal for research conducted with the support of this grant was to develop design oriented structural optimization methods for the conceptual design of airplanes. Traditionally in conceptual design airframe weight is estimated based on statistical equations developed over years of fitting airplane weight data in data bases of similar existing air- planes. Utilization of such regression equations for the design of new airplanes can be justified only if the new air-planes use structural technology similar to the technology on the airplanes in those weight data bases. If any new structural technology is to be pursued or any new unconventional configurations designed the statistical weight equations cannot be used. In such cases any structural weight estimation must be based on rigorous "physics based" structural analysis and optimization of the airframes under consideration. Work under this grant progressed to explore airframe design-oriented structural optimization techniques along two lines of research: methods based on "fast" design oriented finite element technology and methods based on equivalent plate / equivalent shell models of airframes, in which the vehicle is modelled as an assembly of plate and shell components, each simulating a lifting surface or nacelle / fuselage pieces. Since response to changes in geometry are essential in conceptual design of airplanes, as well as the capability to optimize the shape itself, research supported by this grant sought to develop efficient techniques for parametrization of airplane shape and sensitivity analysis with respect to shape design variables. Towards the end of the grant period a prototype automated structural analysis code designed to work with the NASA Aircraft Synthesis conceptual design code ACS= was delivered to NASA Ames.

Implementing School Reform: "Making Middle Grades Work" for All Students

ERIC Educational Resources Information Center

Cooney, Sondra; Lasater, Beth

2006-01-01

"Making Middle Grades Work" ("MMGW") is a school improvement design developed by the Southern Regional Education Board (SREB) and its member states. "MMGW" is built on research-based instructional practices and policies. The design combines challenging yet attainable goals with accountability that encourages teachers, supports students and results…

Challenges in designing an All-Wales professional development programme to empower ward sisters and charge nurses.

PubMed

Jasper, Melanie A; Grundy, Lynne; Curry, Esther; Jones, Lynne

2010-09-01

To discuss the challenges of designing a professional development programme for ward managers working in in-patient facilities in Wales. In 2008, the Minister of Health launched the Free to Lead, Free to Care initiative to empower ward managers. One work-stream involved the creation of a universal professional development programme to ensure they had the skills and knowledge to function effectively in their roles in the newly restructured NHS in Wales. A collaborative, staged approach, involving multiple stakeholders, resulted in the design of a programme founded in principles of action and work-based learning tailored to the needs of the individual in attaining accredited competencies. Achieving buy-in and ownership from stakeholders are essential to ensure standardization and consistency of implementation of a universal programme. Shared responsibility and acceptance of key principles underpinning an individualized, work-based programme are fundamental to ensuring equity of outcome achievement. IMPLICATIONS FOR MANAGEMENT: Managerially facilitated cultural change is needed to embed individual work-based professional development programmes in the clinical environment, with practitioners supported through a variety of learning strategies appropriate to their learning needs. © 2010 The Authors. Journal compilation © 2010 Blackwell Publishing Ltd.

A Management Information System for Allocating, Monitoring and Reviewing Work Assignments.

DTIC Science & Technology

1986-06-01

This thesis investigated the feasibility of developing a small scale management information system on a micro-computer. The working system was...ORSA journal. The management information system was designed using Ashton-Tate’s dBaseIII software. As designed, the system will operate on any...computer operating under microsoft’s Disk Operating System (MS-DOS). The user must provide his own dBaseIII software. A similar management information system could

A user-centered model for designing consumer mobile health (mHealth) applications (apps).

PubMed

Schnall, Rebecca; Rojas, Marlene; Bakken, Suzanne; Brown, William; Carballo-Dieguez, Alex; Carry, Monique; Gelaude, Deborah; Mosley, Jocelyn Patterson; Travers, Jasmine

2016-04-01

Mobile technologies are a useful platform for the delivery of health behavior interventions. Yet little work has been done to create a rigorous and standardized process for the design of mobile health (mHealth) apps. This project sought to explore the use of the Information Systems Research (ISR) framework as guide for the design of mHealth apps. Our work was guided by the ISR framework which is comprised of 3 cycles: Relevance, Rigor and Design. In the Relevance cycle, we conducted 5 focus groups with 33 targeted end-users. In the Rigor cycle, we performed a review to identify technology-based interventions for meeting the health prevention needs of our target population. In the Design Cycle, we employed usability evaluation methods to iteratively develop and refine mock-ups for a mHealth app. Through an iterative process, we identified barriers and facilitators to the use of mHealth technology for HIV prevention for high-risk MSM, developed 'use cases' and identified relevant functional content and features for inclusion in a design document to guide future app development. Findings from our work support the use of the ISR framework as a guide for designing future mHealth apps. Results from this work provide detailed descriptions of the user-centered design and system development and have heuristic value for those venturing into the area of technology-based intervention work. Findings from this study support the use of the ISR framework as a guide for future mHealth app development. Use of the ISR framework is a potentially useful approach for the design of a mobile app that incorporates end-users' design preferences. Copyright © 2016 Elsevier Inc. All rights reserved.

Project-Based Curriculum for Teaching Analytical Design to Freshman Engineering Students via Reconfigurable Trebuchets

ERIC Educational Resources Information Center

Herber, Daniel R.; Deshmukh, Anand P.; Mitchell, Marlon E.; Allison, James T.

2016-01-01

This paper presents an effort to revitalize a large introductory engineering course for incoming freshman students that teaches them analytical design through a project-based curriculum. This course was completely transformed from a seminar-based to a project-based course that integrates hands-on experimentation with analytical work. The project…

When paradigms collide at the road rail interface: evaluation of a sociotechnical systems theory design toolkit for cognitive work analysis.

PubMed

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G

2016-09-01

The Cognitive Work Analysis Design Toolkit (CWA-DT) is a recently developed approach that provides guidance and tools to assist in applying the outputs of CWA to design processes to incorporate the values and principles of sociotechnical systems theory. In this paper, the CWA-DT is evaluated based on an application to improve safety at rail level crossings. The evaluation considered the extent to which the CWA-DT met pre-defined methodological criteria and aligned with sociotechnical values and principles. Both process and outcome measures were taken based on the ratings of workshop participants and human factors experts. Overall, workshop participants were positive about the process and indicated that it met the methodological criteria and sociotechnical values. However, expert ratings suggested that the CWA-DT achieved only limited success in producing RLX designs that fully aligned with the sociotechnical approach. Discussion about the appropriateness of the sociotechnical approach in a public safety context is provided. Practitioner Summary: Human factors and ergonomics practitioners need evidence of the effectiveness of methods. A design toolkit for cognitive work analysis, incorporating values and principles from sociotechnical systems theory, was applied to create innovative designs for rail level crossings. Evaluation results based on the application are provided and discussed.

Building Work-Based Learning into the School Curriculum

ERIC Educational Resources Information Center

Asher, Jenny

2005-01-01

Purpose - The purpose of this article is to examine the increasing number of opportunities for pre-16 young people at schools in England to become involved in work related and work based programmes and to look at the key drivers of change and their impact. Design/methodology/approach - The approach is descriptive, covering current trends and also…

Field Supervisor Perspectives on Evidence-Based Practice: Familiarity, Feasibility, and Implementation

ERIC Educational Resources Information Center

Heffernan, Kristin; Dauenhauer, Jason

2017-01-01

The Council on Social Work Education has designated field education as social work's signature pedagogy, putting field supervisors in a key role of preparing students as competent social workers. This study examined field supervisors' Evidence Based Practice (EBP) behaviors using a modified version of the Evidence-Based Practice Process Assessment…

Organising the Chemistry of Question-Based Learning: A Case Study

ERIC Educational Resources Information Center

de Jesus, Helena Pedrosa; de Souza, Francisle Neri; Teixeira-Dias, Jose J. C.; Watts, Mike

2005-01-01

Designing inquiry-based-learning with and for university students develops problem-solving skills and logical reasoning, as well as reflective thinking. It involves working as a member of a team, questioning, being creative, shaping the skills for continued intellectual development. It is argued that inquiry-based group work is one of the most…

User-Centered Design Guidelines for Collaborative Software for Intelligence Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholtz, Jean; Endert, Alexander N.

In this position paper we discuss the necessity of using User-Centered Design (UCD) methods in order to design collaborative software for the intelligence community. We present some standing issues in collaborative software based on existing work within the intelligence community. Based on this information we present opportunities to address some of these challenges.

Toward a Web Based Environment for Evaluation and Design of Pedagogical Hypermedia

ERIC Educational Resources Information Center

Trigano, Philippe C.; Pacurar-Giacomini, Ecaterina

2004-01-01

We are working on a method, called CEPIAH. We propose a web based system used to help teachers to design multimedia documents and to evaluate their prototypes. Our current research objectives are to create a methodology to sustain the educational hypermedia design and evaluation. A module is used to evaluate multimedia software applied in…

Using Design-Based Research in Informal Environments

ERIC Educational Resources Information Center

Reisman, Molly

2008-01-01

Design-Based Research (DBR) has been a tool of the learning sciences since the early 1990s, used as a way to improve and study learning environments. Using an iterative process of design with the goal of reining theories of learning, researchers and educators now use DBR seek to identify "how" to make a learning environment work. They then draw…

Investigation of a 0.6 hub-tip radius-ratio transonic turbine designed for secondary-flow study I : design and experimental performance of standard turbine

NASA Technical Reports Server (NTRS)

Rohlik, Harold E; Wintucky, William T; Scibbe, Herbert W

1957-01-01

Detailed design information including overall performance parameters, velocity diagrams, and blade surface velocities is presented. Experimental performance includes maps based on rating as well as total-pressure ratios showing the effect of exit whirl. Also included are results of surveys at the stator exit and downstream of the rotor at design speed and specific work. This information will be used as a standard for comparison with subsequent secondary-flow work.

Combining Adaptive Hypermedia with Project and Case-Based Learning

ERIC Educational Resources Information Center

Papanikolaou, Kyparisia; Grigoriadou, Maria

2009-01-01

In this article we investigate the design of educational hypermedia based on constructivist learning theories. According to the principles of project and case-based learning we present the design rational of an Adaptive Educational Hypermedia system prototype named MyProject; learners working with MyProject undertake a project and the system…

Library Automation and Facility Planning.

ERIC Educational Resources Information Center

Cohen, Aaron; Cohen, Elaine

This seminar and workbook are designed to aid librarians in planning and designing attractive and efficient libraries in light of the changing technologies of the 1980s. It is based on the premise that the electronic revolution of the 1980s will cause substantial changes in the work force, work processes, and the nature of physical layouts of…

Learning Opportunities for Nurses Working within Home Care

ERIC Educational Resources Information Center

Lundgren, Solveig

2011-01-01

Purpose: The purpose of this study is to explore home care nurses' experience of learning in a multicultural environment. Design/methodology/approach: The study was based on qualitative research design. Data were collected through repeated interviews with registered home care nurses working in a multicultural area. The data were analyzed through a…

Portraying the Work of Instructional Designing: An Activity-Oriented Analysis.

ERIC Educational Resources Information Center

Rathbun, Gail A.

This study tested the usefulness of an activity-oriented approach in describing and explaining the work of designing an international distance education course in business entrepreneurship at Indiana University. The course was team taught with an instructor at the City University of Hong Kong; video conferencing and Internet-based technologies…

Design of embedded intelligent monitoring system based on face recognition

NASA Astrophysics Data System (ADS)

Liang, Weidong; Ding, Yan; Zhao, Liangjin; Li, Jia; Hu, Xuemei

2017-01-01

In this paper, a new embedded intelligent monitoring system based on face recognition is proposed. The system uses Pi Raspberry as the central processor. A sensors group has been designed with Zigbee module in order to assist the system to work better and the two alarm modes have been proposed using the Internet and 3G modem. The experimental results show that the system can work under various light intensities to recognize human face and send alarm information in real time.

Simplify to survive: prescriptive layouts ensure profitable scaling to 32nm and beyond

NASA Astrophysics Data System (ADS)

Liebmann, Lars; Pileggi, Larry; Hibbeler, Jason; Rovner, Vyacheslav; Jhaveri, Tejas; Northrop, Greg

2009-03-01

The time-to-market driven need to maintain concurrent process-design co-development, even in spite of discontinuous patterning, process, and device innovation is reiterated. The escalating design rule complexity resulting from increasing layout sensitivities in physical and electrical yield and the resulting risk to profitable technology scaling is reviewed. Shortcomings in traditional Design for Manufacturability (DfM) solutions are identified and contrasted to the highly successful integrated design-technology co-optimization used for SRAM and other memory arrays. The feasibility of extending memory-style design-technology co-optimization, based on a highly simplified layout environment, to logic chips is demonstrated. Layout density benefits, modeled patterning and electrical yield improvements, as well as substantially improved layout simplicity are quantified in a conventional versus template-based design comparison on a 65nm IBM PowerPC 405 microprocessor core. The adaptability of this highly regularized template-based design solution to different yield concerns and design styles is shown in the extension of this work to 32nm with an increased focus on interconnect redundancy. In closing, the work not covered in this paper, focused on the process side of the integrated process-design co-optimization, is introduced.

Design of an SolidWorks-based household substrate cultivation device

NASA Astrophysics Data System (ADS)

Yi, Guo; Yueying, Wang

2018-03-01

Rapid urbanization has caused increasingly severe environmental problems and smaller tillable land area. Even worse, negative reports on vegetable production are repeatedly found. In this case, home gardening has become an inexorable trend. To meet demand for vegetable cultivation in the home environment, an SolidWorks-based household substrate cultivation device has been designed. This device is composed of the cultivation tank, upright post, base, irrigation system, supplemental lighting system and control system. The household substrate cultivation device manufactured based on the design results has shown in practice that this device features an esthetic appearance, low cost, automatic irrigation and lighting supplementation, good vegetable growing conditions, full of ornamental value and practicability and thus is suitable for vegetable growing in the home environment. Hence it has a higher promotion value in the home gardening field.

Ambulance Design Survey 2011: A Summary Report

PubMed Central

Lee, Y Tina; Kibira, Deogratias; Feeney, Allison Barnard; Marshall, Jennifer

2013-01-01

Current ambulance designs are ergonomically inefficient and often times unsafe for practical treatment response to medical emergencies. Thus, the patient compartment of a moving ambulance is a hazardous working environment. As a consequence, emergency medical services (EMS) workers suffer fatalities and injuries that far exceed those of the average work place in the United States. To reduce injury and mortality rates in ambulances, the Department of Homeland Security Science and Technology Directorate has teamed with the National Institute of Standards and Technology, the National Institute for Occupational Safety and Health, and BMT Designers & Planners in a joint project to produce science-based ambulance patient compartment design standards. This project will develop new crash-safety design standards and improved user-design interface guidance for patient compartments that are safer for EMS personnel and patients, and facilitate improved patient care. The project team has been working with practitioners, EMS workers’ organizations, and manufacturers to solicit needs and requirements to address related issues. This paper presents an analysis of practitioners’ concerns, needs, and requirements for improved designs elicited through the web-based survey of ambulance design, held by the National Institute of Standards and Technology. This paper also introduces the survey, analyzes the survey results, and discusses recommendations for future ambulance patient compartments design. PMID:26401439

Algorithm Design of CPCI Backboard's Interrupts Management Based on VxWorks' Multi-Tasks

NASA Astrophysics Data System (ADS)

Cheng, Jingyuan; An, Qi; Yang, Junfeng

2006-09-01

This paper begins with a brief introduction of the embedded real-time operating system VxWorks and CompactPCI standard, then gives the programming interfaces of Peripheral Controller Interface (PCI) configuring, interrupts handling and multi-tasks programming interface under VxWorks, and then emphasis is placed on the software frameworks of CPCI interrupt management based on multi-tasks. This method is sound in design and easy to adapt, ensures that all possible interrupts are handled in time, which makes it suitable for data acquisition systems with multi-channels, a high data rate, and hard real-time high energy physics.

Analysis of the implementation of ergonomic design at the new units of an oil refinery.

PubMed

Passero, Carolina Reich Marcon; Ogasawara, Erika Lye; Baú, Lucy Mara Silva; Buso, Sandro Artur; Bianchi, Marcos Cesar

2012-01-01

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.

Hubble Space Telescope Design Engineering Knowledgebase (HSTDEK)

NASA Technical Reports Server (NTRS)

Johannes, James D.; Everetts, Clark

1989-01-01

The research covered here pays specific attention to the development of tools to assist knowledge engineers in acquiring knowledge and to assist other technical, engineering, and management personnel in automatically performing knowledge capture as part of their everyday work without adding any extra work to what they already do. Requirements for data products, the knowledge base, and methods for mapping knowledge in the documents onto the knowledge representations are discussed, as are some of the difficulties of capturing in the knowledge base the structure of the design process itself, along with a model of the system designed. The capture of knowledge describing the interactions of different components is also discussed briefly.

Collaborative Working Architecture for IoT-Based Applications.

PubMed

Mora, Higinio; Signes-Pont, María Teresa; Gil, David; Johnsson, Magnus

2018-05-23

The new sensing applications need enhanced computing capabilities to handle the requirements of complex and huge data processing. The Internet of Things (IoT) concept brings processing and communication features to devices. In addition, the Cloud Computing paradigm provides resources and infrastructures for performing the computations and outsourcing the work from the IoT devices. This scenario opens new opportunities for designing advanced IoT-based applications, however, there is still much research to be done to properly gear all the systems for working together. This work proposes a collaborative model and an architecture to take advantage of the available computing resources. The resulting architecture involves a novel network design with different levels which combines sensing and processing capabilities based on the Mobile Cloud Computing (MCC) paradigm. An experiment is included to demonstrate that this approach can be used in diverse real applications. The results show the flexibility of the architecture to perform complex computational tasks of advanced applications.

DHM simulation in virtual environments: a case-study on control room design.

PubMed

Zamberlan, M; Santos, V; Streit, P; Oliveira, J; Cury, R; Negri, T; Pastura, F; Guimarães, C; Cid, G

2012-01-01

This paper will present the workflow developed for the application of serious games in the design of complex cooperative work settings. The project was based on ergonomic studies and development of a control room among participative design process. Our main concerns were the 3D human virtual representation acquired from 3D scanning, human interaction, workspace layout and equipment designed considering ergonomics standards. Using Unity3D platform to design the virtual environment, the virtual human model can be controlled by users on dynamic scenario in order to evaluate the new work settings and simulate work activities. The results obtained showed that this virtual technology can drastically change the design process by improving the level of interaction between final users and, managers and human factors team.

Teaching Ethics as Design

ERIC Educational Resources Information Center

Kirkman, Robert; Fu, Katherine; Lee, Bumsoo

2017-01-01

This paper introduces an approach to teaching ethics as design in a new course entitled Design Ethics, team-taught by a philosopher and an engineer/designer. The course follows a problem-based learning model in which groups of students work through the phases of the design process on a project for a local client, considering the design values and…

Experiences of Practice-Based Learning in Phenomenographic Perspective

ERIC Educational Resources Information Center

Rovio-Johansson, Airi

2018-01-01

Purpose: The paper aims to examine, within the context of professional practice and learning, how designers collaboratively working in international teams experience practice-based learning and how such occasions contribute to professional development. Design/methodology/approach: The paper introduces the cooperation project between Tibro Training…

CLINICAL SURFACES - Activity-Based Computing for Distributed Multi-Display Environments in Hospitals

NASA Astrophysics Data System (ADS)

Bardram, Jakob E.; Bunde-Pedersen, Jonathan; Doryab, Afsaneh; Sørensen, Steffen

A multi-display environment (MDE) is made up of co-located and networked personal and public devices that form an integrated workspace enabling co-located group work. Traditionally, MDEs have, however, mainly been designed to support a single “smart room”, and have had little sense of the tasks and activities that the MDE is being used for. This paper presents a novel approach to support activity-based computing in distributed MDEs, where displays are physically distributed across a large building. CLINICAL SURFACES was designed for clinical work in hospitals, and enables context-sensitive retrieval and browsing of patient data on public displays. We present the design and implementation of CLINICAL SURFACES, and report from an evaluation of the system at a large hospital. The evaluation shows that using distributed public displays to support activity-based computing inside a hospital is very useful for clinical work, and that the apparent contradiction between maintaining privacy of medical data in a public display environment can be mitigated by the use of CLINICAL SURFACES.

Knowledge workers and knowledge-intense organizations, Part 2: Designing and managing for productivity.

PubMed

Weaver, D; Sorrells-Jones, J

1999-09-01

Our economy is shifting from a hard goods and material products base to one in which knowledge is the primary mode of production. Organizations are experimenting with designs that support knowledge work by clustering individuals with different but complementary skills in focused teams. The goal is to increase applied knowledge that furthers the organization's strategic intent. The team-based knowledge work model holds promise for healthcare organizations that are under pressure to use knowledge to improve clinical care, integrate care across disciplines and settings, and accept accountability for costs. However, the shift from the traditional bureaucratic model to the flexible team-based design mandates changes in the design of the organization, the role of leadership, and the attributes of the teams and team members. In Part 2 of this three-part series, the authors explore the necessary design changes and the new roles for leadership, teams, and their members. Additionally, implications for healthcare clinicians, particularly nurses, are discussed.

Locomotive cab design development. Volume 1 : analysis of locomotive cab environment & development of cab design alternatives

DOT National Transportation Integrated Search

1976-10-01

This report presents an analysis of the line haul freight : engineer's working and living environment, the resultant locomotive : cab design and design alternatives. The analysis is based on a : delineation of functional requirements found in current...

Study and Labour Market Effects of Graduate Students' Interaction with Work Organisations during Education: A Cohort Study

ERIC Educational Resources Information Center

Thune, Taran; Støren, Liv Anne

2015-01-01

Purpose: The purpose of this paper is to present an empirically based discussion of how cooperation between higher education institutions and work organisations (WOs) can increase graduate learning experiences and employability. Design/methodology/approach: Data are based on an electronic and mail-based graduate survey among Norwegian master's…

GENESIS 2: Advanced lunar outpost

NASA Technical Reports Server (NTRS)

Moore, Gary T.

1991-01-01

Advanced, second-generation lunar habitats for astronauts and mission specialists working on the Moon are investigated. The work was based on design constraints set forth in previous publications. Design recommendations are based on environmental response to the lunar environment, habitability, safety, near-term technology, replaceability and modularity, and suitability for NASA lunar research missions in the early 21st century. Scientists, engineers, and architects from NASA/JSC, Wisconsin aeronautical industry, and area universities gave technical input and offered critiques at design reviews throughout the process. The recommended design uses a lunar lava tube, with construction using a combination of Space Station Freedom-derived modules and lightweight Kevlar-laminate inflatables. The outpost includes research laboratories and biotron, crew quarters and support facility, mission control, health maintenance facility, and related areas for functional and psychological requirements. Furniture, specialized equipment, and lighting are included in the design analysis.

On designing low pressure loss working spaces for a planar Stirling micromachine

NASA Astrophysics Data System (ADS)

Hachey, M.-A.; Léveillé, É.; Fréchette, L. G.; Formosa, F.

2015-12-01

In this paper, research was undertaken with the objective to design low pressure loss working spaces for a Stirling cycle micro heat engine operating from low temperature waste heat. This planar free-piston heat engine is anticipated to operate at the kHz level with mm3 displacement. Given the resonant nature of the free-piston configuration, the complexity of its working gas’ flow geometry and its projected high operating frequency, flow analysis is relatively complex. Design considerations were thus based on fast prototyping and experimentation. Results show that geometrical features, such as a sharp 90° corner between the regenerator and working spaces, are strong contributors to pressure losses. This research culminated into a promising revised working space configuration for engine start-up, as it considerably reduced total pressure losses, more than 80% at Re = 700, from the original design.

Driver responses to differing urban work zone configurations.

PubMed

Morgan, J F; Duley, A R; Hancock, P A

2010-05-01

This study reports the results of a simulator-based assessment of driver response to two different urban highway work zone configurations. One configuration represented an existing design which was contrasted with a second configuration that presented a reduced taper length prototype work zone design. Twenty-one drivers navigated the two different work zones in two different conditions, one with and one without a lead vehicle; in this case a bus. Measures of driver speed, braking, travel path, and collision frequency were recorded. Drivers navigated significantly closer to the boundary of the work area in the reduced taper length design. This proximity effect was moderated by the significant interaction between lead vehicle and taper length and such interactive effects were also observed for driver speed at the end of the work zone and the number of collisions observed within the work zone itself. These results suggest that reduced taper length poses an increase in risk to both drivers and work zone personnel, primarily when driver anticipation is reduced by foreshortened viewing distances. Increase in such risk is to a degree offset by the reduction of overall exposure to the work zone that a foreshortened taper creates. The benefits and limitations to a simulation-based approach to the assessment and prediction of driver behavior in different work zone configurations are also discussed. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Anthropometrical data of middle-aged Japanese women for industrial design applications.

PubMed

Ashizawa, K; Okada, A; Kouchi, M; Horino, S; Kikuchi, Y

1994-06-01

Despite the growing importance of human interface design, and despite the growing number of working women, no considerations have been given to women's working spaces and tools. Their designs are based on men's anthropometrical data, and this does not assure safety and amenity of women's working environments. Moreover, few data on women's body measurements are available. The Research Institute of Human Engineering for Quality Life is carrying out an ergonomic anthropometrical study on a large number of Japanese people to create a database for industrial use. The fee for the use of these data is, however, making it very difficult to profit from their acquisition. Therefore, we conducted an anthropometrical study for industrial design use on middle-aged female subjects, who are in the most difficult age group to access. This report should be useful in designing working spaces and tools for women as laborers as well as users.

The Power Dynamics and Politics of Survey Design: Measuring Workload Associated with Teaching, Administering and Supporting Work-Integrated Learning Courses

ERIC Educational Resources Information Center

Clark, Lindie; Rowe, Anna; Cantori, Alex; Bilgin, Ayse; Mukuria, Valentine

2016-01-01

Work-integrated learning (WIL) courses can be more time consuming and resource intensive to design, teach, administer and support than classroom-based courses, as they generally require different curricula and pedagogical approaches as well as additional administrative and pastoral responsibilities. Workload and resourcing issues are reported as…

Working Collectively to Design Online Teacher Education Curriculum: How Do Teacher Educators Manage to Do It?

ERIC Educational Resources Information Center

Milewski, Amanda; Gürsel, Umut; Herbst, Patricio

2017-01-01

This paper is part of a three-year inquiry that supports and investigates the work of groups of mathematics teacher educators using technological tools to design and implement multimedia practice-based teacher education curriculum materials. This paper describes the kinds of activities, interactions, and tools used by mathematics teacher educators…

Starting to Experiment with Wave Power

ERIC Educational Resources Information Center

Hare, Jonathan; McCallie, Ellen

2005-01-01

Outlined is a simple design for a working wave-powered electrical generator based on one made on the BBC "Rough Science" TV series. The design has been kept deliberately simple to facilitate rapid pupil/student involvement and most importantly so that there is much scope for their own ingenuity and ideas. The generator works on the principle of…

High-speed engine/component performance assessment using exergy and thrust-based methods

NASA Technical Reports Server (NTRS)

Riggins, D. W.

1996-01-01

This investigation summarizes a comparative study of two high-speed engine performance assessment techniques based on energy (available work) and thrust-potential (thrust availability). Simple flow-fields utilizing Rayleigh heat addition and one-dimensional flow with friction are used to demonstrate the fundamental inability of conventional energy techniques to predict engine component performance, aid in component design, or accurately assess flow losses. The use of the thrust-based method on these same examples demonstrates its ability to yield useful information in all these categories. Energy and thrust are related and discussed from the stand-point of their fundamental thermodynamic and fluid dynamic definitions in order to explain the differences in information obtained using the two methods. The conventional definition of energy is shown to include work which is inherently unavailable to an aerospace Brayton engine. An engine-based energy is then developed which accurately accounts for this inherently unavailable work; performance parameters based on this quantity are then shown to yield design and loss information equivalent to the thrust-based method.

Service-Learning Instructional Design Considerations

ERIC Educational Resources Information Center

Maddrell, Jennifer

2014-01-01

This paper explores the design of "service-learning" experiences to engage college students in the real-world application of course subject matter. Service learning is an educational approach that combines community service, academic coursework, and work-based applied learning. Based on data gathered during a series of recent interviews…

Designing Place-Based Interventions for Sustainability and Replicability: The Case of GO! Austin/VAMOS! Austin.

PubMed

Hussaini, Aliya; Pulido, Carmen Llanes; Basu, Semonti; Ranjit, Nalini

2018-01-01

Place-based health efforts account for the role of the community environment in shaping decisions and circumstances that affect population well-being. Such efforts, rooted as they are in the theory that health is socially determined, mobilize resources for health promotion that are not typically used, and offer a more informed and robust way of promoting health outcomes within a community. Common criticisms of place-based work include the difficulty of replication , since engagement is so specific to a place, and limited sustainability of the work, in the absence of continued institutional structures, both within the community and supporting structures outside the community, to keep these initiatives resilient. This paper describes a place-based initiative, GO! Austin/VAMOS! Austin (GAVA), which was designed to harness the strengths of place-based work-namely, its specificity to place and community. From the start, the project was designed to balance this specificity with a focus on developing and utilizing a standardized set of evidence-informed implementation and evaluation approaches and tools that were flexible enough to be modified for specific settings. This was accompanied by an emphasis on leadership and capacity building within resident leaders, which provided for informed intervention and demand building capacity, but also for longevity as partners, philanthropic, and otherwise, moved in and out of the work.

Representing the work of medical protocols for organizational simulation.

PubMed Central

Fridsma, D. B.

1998-01-01

Developing and implementing patient care protocols within a specific organizational setting requires knowledge of the protocol, the organization, and the way in which the organization does its work. Computer-based simulation tools have been used in many industries to provide managers with prospective insight into problems of work process and organization design mismatch. Many of these simulation tools are designed for well-understood routine work processes in which there are few contingent tasks. In this paper, we describe theoretic that make it possible to simulate medical protocols using an information-processing theory framework. These simulations will allow medical administrators to test different protocol and organizational designs before actually using them within a particular clinical setting. PMID:9929231

A bootstrap lunar base: Preliminary design review 2

NASA Technical Reports Server (NTRS)

1987-01-01

A bootstrap lunar base is the gateway to manned solar system exploration and requires new ideas and new designs on the cutting edge of technology. A preliminary design for a Bootstrap Lunar Base, the second provided by this contractor, is presented. An overview of the work completed is discussed as well as the technical, management, and cost strategies to complete the program requirements. The lunar base design stresses the transforming capabilities of its lander vehicles to aid in base construction. The design also emphasizes modularity and expandability in the base configuration to support the long-term goals of scientific research and profitable lunar resource exploitation. To successfully construct, develop, and inhabit a permanent lunar base, however, several technological advancements must first be realized. Some of these technological advancements are also discussed.

Improving a web-based employability intervention for work-disabled employees: results of a pilot economic evaluation.

PubMed

Noben, Cindy; Evers, Silvia; Genabeek, Joost van; Nijhuis, Frans; de Rijk, Angelique

2017-04-01

Purpose The purpose of this study is to improve web-based employability interventions for employees with work-related health problems for both intervention content and study design by means of a pilot economic evaluation. Methods Uptake rate analysis for the intervention elements, cost effectiveness, cost utility and subgroup analyses were conducted to identify potential content-related intervention improvements. Differences in work ability and quality-adjusted life years and overall contribution of resource items to the total costs were assessed. These were used to guide study design improvements. Results Sixty-three participants were a-select allocated to either the intervention (n = 29) or the control (n = 34) group. Uptake regarding the intervention elements ranged between 3% and 70%. Cost-effectiveness and cost-utility analyses resulted in negative effects although higher total costs. Incremental effects were marginal (work ability -0.51; QALY -0.01). Conclusions The web-based tool to enhance employability among work disabled employees requires improvements regarding targeting and intensity; outcome measures selected and collection of cost data. With respect to the studies of disability and rehabilitation, the findings and methods presented in this pilot economic evaluation could guide the assessment of future assistive "e-health" technologies. IMPLICATIONS FOR REHABILITATION The methods presented in this pilot economic evaluation have large potentials to guide the assessment of future assistive e-health technologies addressing work-disabilities. The findings show that the web-based tool requires content related improvements with respect to targeting and intensity to enhance employability among work disabled employees. The findings show that the web-based tool would benefit from improvements related to the study design by more adequately selecting and collecting both outcome measures and cost data. The burden attributable to large-scale studies and implementation issues were prevented as the outcomes of the pilot economic evaluation did not support the implementation of the web-based tool.

"There is no carnival without samba": Revealing barriers hampering biodiversity-based R&D and eco-design in Brazil.

PubMed

Jabbour, Charbel Jose Chiappetta; Jugend, Daniel; Jabbour, Ana Beatriz Lopes de Sousa; Govindan, Kannan; Kannan, Devika; Leal Filho, Walter

2018-01-15

Considering the unique relevance of Brazilian biodiversity, this research aims to investigate the main barriers to biodiversity-based R&D and eco-design development in a leading national company which has been commended for its innovation and sustainability. The methodology for this research was based on on-location visits, in-depth interviews, and consensus building among R&D, sustainability, and quality managers. A multi-criteria decision-making (MCDM) approach was adopted through interpretive structural modelling (ISM), a method that assists decision makers to transform complex models with unclear data into structural models. Some of the most influential barriers to biodiversity-based eco-design initiatives are "lack of legal incentive", "not enough demand from the market", and "not enough available knowledge/scientific data." The most relevant barrier was "no legal incentive" from government. Consequently, managers should concentrate their efforts in tackling those barriers that may affect other barriers known as 'key barriers'. Government should work decisively toward promoting a framework of legal incentives for bio-based eco-design; otherwise, metaphorically, "there is not carnival without the samba singer who pushes the rhythm". The results given here reveal the barriers for bio-based eco-design in a Brazilian leading company, and this is the first work combining ISM to barriers to biodiversity R&D and eco-design. Copyright © 2017 Elsevier Ltd. All rights reserved.

Reshaping the Boundaries of Community Engagement in Design Education: Global and Local Explorations

ERIC Educational Resources Information Center

Hicks, Travis L.; Radtke, Rebekah Ison

2015-01-01

Community-driven design is a current movement in the forefront of many designers' practices and on university campuses in design programs. The authors examine work from their respective public state universities' design programs as examples of best practices. In these case studies, the authors share experiences using community-based design…

Design, fabrication, test, qualification and price analysis of third generation design solar cell modules. Part 1: Intermediate load module

NASA Technical Reports Server (NTRS)

Bottenberg, W. R.

1981-01-01

The updated program plan and narrative reflects the design and development work done and progress made in establishing a viable design for these modules. Design alterations from the preproduction plan are discussed based on experience gained during the preproduction phase of the program.

Infusing Technology Driven Design Thinking in Industrial Design Education: A Case Study

ERIC Educational Resources Information Center

Mubin, Omar; Novoa, Mauricio; Al Mahmud, Abdullah

2017-01-01

Purpose: This paper narrates a case study on design thinking-based education work in an industrial design honours program. Student projects were developed in a multi-disciplinary setting across a Computing and Engineering faculty that allowed promoting technologically and user-driven innovation strategies. Design/methodology/approach: A renewed…

The "Right Kind of Telling": Knowledge Building in the Academic Design Studio

ERIC Educational Resources Information Center

Cennamo, Katherine; Brandt, Carol

2012-01-01

Studio-based instruction, as traditionally enacted in design disciplines such as architecture, product design, graphic design, and the like, consists of dedicated desk space for each student, extended time blocks allocated to studio classes, and classroom interactions characterized by independent and group work on design problems supplemented by…

Training Students’ Science Process Skills through Didactic Design on Work and Energy

NASA Astrophysics Data System (ADS)

Ramayanti, S.; Utari, S.; Saepuzaman, D.

2017-09-01

Science Process Skills (SPS) has not been optimally trained to the students in the learning activity. The aim of this research is finding the ways to train SPS on the subject of Work and Energy. One shot case study design is utilized in this research that conducted on 32 students in one of the High Schools in Bandung. The students’ SPS responses were analyzed by the development SPS based assessment portfolios. The results of this research showed the didactic design that had been designed to training the identifying variables skills, formulating hypotheses, and the experiment activity shows the development. But the didactic design to improve the students’ predicting skills shows that the development is still not optimal. Therefore, in the future studies need to be developed the didactic design on the subject Work and Energy that exercising these skills.

Conducting and Supporting a Goal-Based Scenario Learning Environment.

ERIC Educational Resources Information Center

Montgomery, Joel; And Others

1994-01-01

Discussion of goal-based scenario (GBS) learning environments focuses on a training module designed to prepare consultants with new skills in managing clients, designing user-friendly graphical computer interfaces, and working in a client/server computing environment. Transforming the environment from teaching focused to learning focused is…

Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

ERIC Educational Resources Information Center

Russell, Daniel M.; Pirolli, Peter

Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

Design Considerations in Developing a Web-Based Mentor Network.

ERIC Educational Resources Information Center

Sumner, Todd

This paper describes a Web-based mentor network designed to pair students in rural independent schools with undergraduates at selected liberal arts colleges. It is one of nine central program elements that constitute the Proteus(TM) system, a multimedia technologies architecture that supports distributed collaborations and work undertaken in the…

Conceptual Design Oriented Wing Structural Analysis and Optimization

NASA Technical Reports Server (NTRS)

Lau, May Yuen

1996-01-01

Airplane optimization has always been the goal of airplane designers. In the conceptual design phase, a designer's goal could be tradeoffs between maximum structural integrity, minimum aerodynamic drag, or maximum stability and control, many times achieved separately. Bringing all of these factors into an iterative preliminary design procedure was time consuming, tedious, and not always accurate. For example, the final weight estimate would often be based upon statistical data from past airplanes. The new design would be classified based on gross characteristics, such as number of engines, wingspan, etc., to see which airplanes of the past most closely resembled the new design. This procedure works well for conventional airplane designs, but not very well for new innovative designs. With the computing power of today, new methods are emerging for the conceptual design phase of airplanes. Using finite element methods, computational fluid dynamics, and other computer techniques, designers can make very accurate disciplinary-analyses of an airplane design. These tools are computationally intensive, and when used repeatedly, they consume a great deal of computing time. In order to reduce the time required to analyze a design and still bring together all of the disciplines (such as structures, aerodynamics, and controls) into the analysis, simplified design computer analyses are linked together into one computer program. These design codes are very efficient for conceptual design. The work in this thesis is focused on a finite element based conceptual design oriented structural synthesis capability (CDOSS) tailored to be linked into ACSYNT.

IADE: a system for intelligent automatic design of bioisosteric analogs

NASA Astrophysics Data System (ADS)

Ertl, Peter; Lewis, Richard

2012-11-01

IADE, a software system supporting molecular modellers through the automatic design of non-classical bioisosteric analogs, scaffold hopping and fragment growing, is presented. The program combines sophisticated cheminformatics functionalities for constructing novel analogs and filtering them based on their drug-likeness and synthetic accessibility using automatic structure-based design capabilities: the best candidates are selected according to their similarity to the template ligand and to their interactions with the protein binding site. IADE works in an iterative manner, improving the fitness of designed molecules in every generation until structures with optimal properties are identified. The program frees molecular modellers from routine, repetitive tasks, allowing them to focus on analysis and evaluation of the automatically designed analogs, considerably enhancing their work efficiency as well as the area of chemical space that can be covered. The performance of IADE is illustrated through a case study of the design of a nonclassical bioisosteric analog of a farnesyltransferase inhibitor—an analog that has won a recent "Design a Molecule" competition.

IADE: a system for intelligent automatic design of bioisosteric analogs.

PubMed

Ertl, Peter; Lewis, Richard

2012-11-01

IADE, a software system supporting molecular modellers through the automatic design of non-classical bioisosteric analogs, scaffold hopping and fragment growing, is presented. The program combines sophisticated cheminformatics functionalities for constructing novel analogs and filtering them based on their drug-likeness and synthetic accessibility using automatic structure-based design capabilities: the best candidates are selected according to their similarity to the template ligand and to their interactions with the protein binding site. IADE works in an iterative manner, improving the fitness of designed molecules in every generation until structures with optimal properties are identified. The program frees molecular modellers from routine, repetitive tasks, allowing them to focus on analysis and evaluation of the automatically designed analogs, considerably enhancing their work efficiency as well as the area of chemical space that can be covered. The performance of IADE is illustrated through a case study of the design of a nonclassical bioisosteric analog of a farnesyltransferase inhibitor--an analog that has won a recent "Design a Molecule" competition.

Peer review in design: Understanding the impact of collaboration on the review process and student perception

NASA Astrophysics Data System (ADS)

Mandala, Mahender Arjun

A cornerstone of design and design education is frequent situated feedback. With increasing class sizes, and shrinking financial and human resources, providing rich feedback to students becomes increasingly difficult. In the field of writing, web-based peer review--the process of utilizing equal status learners within a class to provide feedback to each other on their work using networked computing systems--has been shown to be a reliable and valid source of feedback in addition to improving student learning. Designers communicate in myriad ways, using the many languages of design and combining visual and descriptive information. This complex discourse of design intent makes peer reviews by design students ambiguous and often not helpful to the receivers of this feedback. Furthermore, engaging students in the review process itself is often difficult. Teams can complement individual diversity and may assist novice designers collectively resolve complex task. However, teams often incur production losses and may be impacted by individual biases. In the current work, we look at utilizing a collaborative team of reviewers, working collectively and synchronously, in generating web based peer reviews in a sophomore engineering design class. Students participated in a cross-over design, conducting peer reviews as individuals and collaborative teams in parallel sequences. Raters coded the feedback generated on the basis of their appropriateness and accuracy. Self-report surveys and passive observation of teams conducting reviews captured student opinion on the process, its value, and the contrasting experience they had conducting team and individual reviews. We found team reviews generated better quality feedback in comparison to individual reviews. Furthermore, students preferred conducting reviews in teams, finding the process 'fun' and engaging. We observed several learning benefits of using collaboration in reviewing including improved understanding of the assessment criteria, roles, expectations, and increased team reflection. These results provide insight into how to improve the review process for instructors and researchers, and forms a basis for future research work in this area. With respect to facilitating peer review process in design based classrooms, we also present recommendations for creating effective review system design and implementation in classroom supported by research and practical experience.

Study to define an approach for developing a computer-based system capable of automatic, unattended assembly/disassembly of spacecraft, phase 1

NASA Technical Reports Server (NTRS)

Nevins, J. L.; Defazio, T. L.; Seltzer, D. S.; Whitney, D. E.

1981-01-01

The initial set of requirements for additional studies necessary to implement a space-borne, computer-based work system capable of achieving assembly, disassembly, repair, or maintenance in space were developed. The specific functions required of a work system to perform repair and maintenance were discussed. Tasks and relevant technologies were identified and delineated. The interaction of spacecraft design and technology options, including a consideration of the strategic issues of repair versus retrieval-replacement or destruction by removal were considered along with the design tradeoffs for accomplishing each of the options. A concept system design and its accompanying experiment or test plan were discussed.

The development of a specialized processor for a space-based multispectral earth imager

NASA Astrophysics Data System (ADS)

Khedr, Mostafa E.

2008-10-01

This work was done in the Department of Computer Engineering, Lvov Polytechnic National University, Lvov, Ukraine, as a thesis entitled "Space Imager Computer System for Raw Video Data Processing" [1]. This work describes the synthesis and practical implementation of a specialized computer system for raw data control and processing onboard a satellite MultiSpectral earth imager. This computer system is intended for satellites with resolution in the range of one meter with 12-bit precession. The design is based mostly on general off-the-shelf components such as (FPGAs) plus custom designed software for interfacing with PC and test equipment. The designed system was successfully manufactured and now fully functioning in orbit.

Case-Based Learning with Worked Examples in Complex Domains: Two Experimental Studies in Undergraduate Medical Education

ERIC Educational Resources Information Center

Stark, Robin; Kopp, Veronika; Fischer, Martin R.

2011-01-01

To investigate the effects of example format (erroneous examples vs. correct examples) and feedback format (elaborated feedback vs. knowledge of results feedback) on medical students' diagnostic competence in the context of a web-based learning environment containing case-based worked examples, two studies with a 2 x 2 design were conducted in the…

Participatory ergonomics for psychological factors evaluation in work system design.

PubMed

Wang, Lingyan; Lau, Henry Y K

2012-01-01

It is a well recognized understanding that workers whose voice needs to be heard should be actively encouraged as full participants and involved in the early design stages of new ergonomic work system which encompass the development and implementation of new tools, workplaces, technologies or organizations. This paper presents a novel participatory strategy to evaluate three key psychological factors which are respectively mental fatigue, spiritual stress, and emotional satisfaction in work system design based on a modified version of Participatory Ergonomics (PE). In specific, it integrates a PE technique with a formulation view by combining the parallel development of PE strategies, frameworks and functions throughout the coverage of the entire work system design process, so as to bridge the gap between qualitative and quantitative analysis of psychological factors which can cause adverse or advantageous effects on worker's physiological and behavioral performance.

Air Force Nuclear Enterprise Organization: A Case Study

DTIC Science & Technology

2016-09-15

will improve the performance of the AFNE. Based on analysis of commercial and industrial business models, what organizational structure , or...Business Dictionary 2015). Organizational structures will be developed based on decisions made with regards to design. The core of an...work flows. Based on design parameter decisions, senior leaders will establish an organizational structure that includes the layout of the

Studio Design Work in First Year Architectural Education. Advisory Centre Occasional Papers in University Education.

ERIC Educational Resources Information Center

Claridge, Philip George Brian

A course for first-year architectural students is described. The approach concentrated on developing an understanding of the nature of design activity through exploration of the kind of thinking that may be applied in order to improve the first-year studio work. The course is based on the following premises: (1) it is possible and educationally…

Learning Styles Inequity for Small to Micro Firms (SMFs): Social Exclusion through Work-Based E-Learning Practice in Europe

ERIC Educational Resources Information Center

Hardaker, Glenn; Dockery, Richard; Sabki, Aishah

2007-01-01

Purpose: The elearn2work study of learning styles in the context of small to micro firms' (SMFs) and their perceived satisfaction has identified some important finding specific to e-learning content design, delivery and international standards development. Design/methodology/approach: The method of research adopts a deductive rather than an…

The research of hourglass worm dynamic balancing simulation based on SolidWorks motion

NASA Astrophysics Data System (ADS)

Wang, Zhuangzhuang; Yang, Jie; Liu, Pingyi; Zhao, Junpeng

2018-02-01

Hourglass worm is extensively used in industry due to its characteristic of heavy-load and a large reduction ratio. Varying sizes of unbalanced mass distribution appeared in the design of a single head worm. With machines developing towards higher speed and precision, the vibration and shock caused by the unbalanced mass distribution of rotating parts must be considered. Therefore, the balance grade of these parts must meet higher requirements. A method based on theoretical analysis and SolidWorks motion software simulation is presented in this paper; the virtual dynamic balance simulation test of the hourglass worm was carried out during the design of the product, so as to ensure that the hourglass worm meet the requirements of dynamic balance in the design process. This can effectively support the structural design of the hourglass worm and provide a way of thinking and designing the same type of products.

Thermal design, rating and second law analysis of shell and tube condensers based on Taguchi optimization for waste heat recovery based thermal desalination plants

NASA Astrophysics Data System (ADS)

Chandrakanth, Balaji; Venkatesan, G; Prakash Kumar, L. S. S; Jalihal, Purnima; Iniyan, S

2018-03-01

The present work discusses the design and selection of a shell and tube condenser used in Low Temperature Thermal Desalination (LTTD). To optimize the key geometrical and process parameters of the condenser with multiple parameters and levels, a design of an experiment approach using Taguchi method was chosen. An orthogonal array (OA) of 25 designs was selected for this study. The condenser was designed, analysed using HTRI software and the heat transfer area with respective tube side pressure drop were computed using the same, as these two objective functions determine the capital and running cost of the condenser. There was a complex trade off between the heat transfer area and pressure drop in the analysis, however second law analysis was worked out for determining the optimal heat transfer area vs pressure drop for condensing the required heat load.

Application of optimization techniques to vehicle design: A review

NASA Technical Reports Server (NTRS)

Prasad, B.; Magee, C. L.

1984-01-01

The work that has been done in the last decade or so in the application of optimization techniques to vehicle design is discussed. Much of the work reviewed deals with the design of body or suspension (chassis) components for reduced weight. Also reviewed are studies dealing with system optimization problems for improved functional performance, such as ride or handling. In reviewing the work on the use of optimization techniques, one notes the transition from the rare mention of the methods in the 70's to an increased effort in the early 80's. Efficient and convenient optimization and analysis tools still need to be developed so that they can be regularly applied in the early design stage of the vehicle development cycle to be most effective. Based on the reported applications, an attempt is made to assess the potential for automotive application of optimization techniques. The major issue involved remains the creation of quantifiable means of analysis to be used in vehicle design. The conventional process of vehicle design still contains much experience-based input because it has not yet proven possible to quantify all important constraints. This restraint on the part of the analysis will continue to be a major limiting factor in application of optimization to vehicle design.

Alternative approaches to analytical designs in occupational injury epidemiology.

PubMed

Mittleman, M A; Maldonado, G; Gerberich, S G; Smith, G S; Sorock, G S

1997-08-01

In this paper, we discuss the theoretical framework upon which observational studies of occupational injuries are based. Following a general description of how causal effects are estimated, the challenges faced by researchers working in this area are outlined, with an emphasis on case-control studies. These challenges include defining the at-risk period for workers whose tasks change over time and whose hazard period may be very brief, evaluating the underreporting of both exposures and injuries, and considering the effects of multiple injuries per individual on study design and data analysis. We review both the theoretical and practical considerations in the design and conduct of traditional case-control studies, based on the collection of individual level data, as well as other approaches, such as using information culled from administrative and descriptive databases, and case-control studies in which the plant or work site is the unit of analysis. The case-crossover design is also reviewed and its utility for reducing confounding due to differences between individuals by self-matching is highlighted. While this design has not yet been applied to the work setting, its potential for increasing our understanding of the causes of acute-onset occupational injuries seems promising. Finally, a variety of hybrid designs are discussed, including combinations of case-control, case-crossover, and cohort designs.

Economic Ergonomic Approach to Design an Optimal Manpower and Mechanization in Rice Production

NASA Astrophysics Data System (ADS)

Muanah; Syuaib, M. F.; Liyantono

2018-05-01

Productivity of manpower could be improved by considering the economic and ergonomic aspect. The ergonomic aspect (human factor) is required to design an optimal manpower, while in the economic aspect, the well being of manpower could be evaluated from the amount of received income based on their work capability. This research was conducted on February 2016 to January 2017 in Gapoktan Silih Asih rice field Cigombong, Bogor. This study aims to analyze the income of manpower based on current conditions, increasement of working hours and mechanization addition. The results showed that manpower income based on the current condition and ergonomic consideration was Rp 1,174,030/person.month, by increasing the working hours with ergonomic consideration the obtained income was Rp 1,766,204/person.month. the revenues were based on the existing work system even though the increasement of working hours have not provided optimal income due to low productivity. Therefore the results of analysis with the addition of selective mechanization, showed self-ownership machinery was more profitable the obtained income have more than the Bogor minimum wage standard of Rp 2,969,325/person.month.

Design of housing file box of fire academy based on RFID

NASA Astrophysics Data System (ADS)

Li, Huaiyi

2018-04-01

This paper presents a design scheme of intelligent file box based on RFID. The advantages of RFID file box and traditional file box are compared and analyzed, and the feasibility of RFID file box design is analyzed based on the actual situation of our university. After introducing the shape and structure design of the intelligent file box, the paper discusses the working process of the file box, and explains in detail the internal communication principle of the RFID file box and the realization of the control system. The application of the RFID based file box will greatly improve the efficiency of our school's archives management.

Marketing and Distributive Education. Community/Work-Based Programs. An Instructor's Guide to Program Strategies. Cooperative Vocational Education; Vocational Work Experience Education; Community Classroom.

ERIC Educational Resources Information Center

Holzkamper, Charlot

Designed for use in high school and adult education programs, this manual was developed to help marketing and distributive education teachers to develop or upgrade community/work-based programs; and to assist teachers who operate these programs to use legal operational practices and to meet the occupational needs of their students and communities.…

40 CFR 133.105 - Treatment equivalent to secondary treatment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... through proper operation and maintenance of the treatment works, based on an analysis of the past... treatment works, considering the design capability of the treatment process and geographical and climatic...

The image acquisition system design of floor grinder

NASA Astrophysics Data System (ADS)

Wang, Yang-jiang; Liu, Wei; Liu, Hui-qin

2018-01-01

Based on linear CCD, high resolution image real-time acquisition system serves as designing a set of image acquisition system for floor grinder through the calculation of optical imaging system. The entire image acquisition system can collect images of ground before and after the work of the floor grinder, and the data is transmitted through the Bluetooth system to the computer and compared to realize real-time monitoring of its working condition. The system provides technical support for the design of unmanned ground grinders.

Embracing Social Sustainability in Design Education: A Reflection on a Case Study in Haiti

ERIC Educational Resources Information Center

Kjøllesdal, Anders; Asheim, Jonas; Boks, Casper

2014-01-01

Sustainable design issues are complex and multi-faceted and need integration in the education of young designers. Current research recommends a holistic view based on problem-solving and inter-disciplinary work, yet few design educators have brought these ideas to their full consequence. Sustainability education for designers is still often rooted…

Considering the Efficacy of Web-Based Worked Examples in Introductory Chemistry

ERIC Educational Resources Information Center

Crippen, Kent J.; Earl, Boyd L.

2004-01-01

Theory suggests that studying worked examples and engaging in self-explanation will improve learning and problem solving. A growing body of evidence supports the use of web-based assessments for improving undergraduate performance in traditional large enrollment courses. This article describes a study designed to investigate these techniques in a…

Please Write: Using Critical Friend Letter Writing in Teacher Research

ERIC Educational Resources Information Center

Samaras, Anastasia P.; Sell, Corey

2013-01-01

This study examines students' experiences using letter writing designed as a socio-cultural-based tool for critical friend work to promote dialogue and critique of their self-study teacher research projects. It seeks to understand their diverse experiences to inform future practice and contribute to the knowledge base of critical friend work in…

Implementing Constructivist Approach into Online Course Designs in Distance Education Institute at Eastern Mediterranean University

ERIC Educational Resources Information Center

Gazi, Zehra A.

2009-01-01

Change and development in work settings for better working practice through projects has become essential. And, in this context, learning through working practice is constructed by participatory action research. This work-based research has a significant role to contribute innovative practice of Distance Education Institute at Eastern…

Students Using a Novel Web-Based Laboratory Class Support System: A Case Study in Food Chemistry Education

ERIC Educational Resources Information Center

van der Kolk, Koos; Beldman, Gerrit; Hartog, Rob; Gruppen, Harry

2012-01-01

The design, usage, and evaluation of a Web-based laboratory manual (WebLM) are described. The main aim of the WebLM is to support students while working in the laboratory by providing them with just-in-time information. Design guidelines for this electronic manual were derived from literature on cognitive load and user interface design. The WebLM…

The impact of computer display height and desk design on 3D posture during information technology work by young adults.

PubMed

Straker, L; Burgess-Limerick, R; Pollock, C; Murray, K; Netto, K; Coleman, J; Skoss, R

2008-04-01

Computer display height and desk design to allow forearm support are two critical design features of workstations for information technology tasks. However there is currently no 3D description of head and neck posture with different computer display heights and no direct comparison to paper based information technology tasks. There is also inconsistent evidence on the effect of forearm support on posture and no evidence on whether these features interact. This study compared the 3D head, neck and upper limb postures of 18 male and 18 female young adults whilst working with different display and desk design conditions. There was no substantial interaction between display height and desk design. Lower display heights increased head and neck flexion with more spinal asymmetry when working with paper. The curved desk, designed to provide forearm support, increased scapula elevation/protraction and shoulder flexion/abduction.

User requirements for geo-collaborative work with spatio-temporal data in a web-based virtual globe environment.

PubMed

Yovcheva, Zornitza; van Elzakker, Corné P J M; Köbben, Barend

2013-11-01

Web-based tools developed in the last couple of years offer unique opportunities to effectively support scientists in their effort to collaborate. Communication among environmental researchers often involves not only work with geographical (spatial), but also with temporal data and information. Literature still provides limited documentation when it comes to user requirements for effective geo-collaborative work with spatio-temporal data. To start filling this gap, our study adopted a User-Centered Design approach and first explored the user requirements of environmental researchers working on distributed research projects for collaborative dissemination, exchange and work with spatio-temporal data. Our results show that system design will be mainly influenced by the nature and type of data users work with. From the end-users' perspective, optimal conversion of huge files of spatio-temporal data for further dissemination, accuracy of conversion, organization of content and security have a key role for effective geo-collaboration. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Comprehensive Computer-Based Instructional Programs: What Works for Educationally Disadvantaged Students?

ERIC Educational Resources Information Center

Swan, Karen; And Others

The Computer Pilot Program of the Division of Computer Information Services of the New York City Board of Education was designed to investigate the claim that comprehensive computer-based instruction (CBI) might best be used to improve the basic skills of educationally disadvantaged students. This ongoing project is designed to identify…

Overcoming Barriers between Volunteer Professionals Advising Project-Based Learning Teams with Regulation Tools

ERIC Educational Resources Information Center

Rees Lewis, Daniel G.; Easterday, Matthew W.; Harburg, Emily; Gerber, Elizabeth M.; Riesbeck, Christopher K.

2018-01-01

To provide the substantial support required for project-based learning (PBL), educators can incorporate professional experts as "design coaches." However, previous work shows barriers incorporating design coaches who can rarely meet face-to-face: (1) communication online is time-consuming, (2) updating coaches online is not perceived as…

Preparing Students for Education, Work, and Community: Activity Theory in Task-Based Curriculum Design

ERIC Educational Resources Information Center

Campbell, Chris; MacPherson, Seonaigh; Sawkins, Tanis

2014-01-01

This case study describes how sociocultural and activity theory were applied in the design of a publicly funded, Canadian Language Benchmark (CLB)-based English as a Second Language (ESL) credential program and curriculum for immigrant and international students in postsecondary institutions in British Columbia, Canada. The ESL Pathways Project…

STEM Teachers' Planned and Enacted Attempts at Implementing Engineering Design-Based Instruction

ERIC Educational Resources Information Center

Capobianco, Brenda M.; Rupp, Madeline

2014-01-01

This study investigates grades 5 and 6 science, technology, engineering, and mathematics (STEM) teachers' planned and actualized engineering design-based instruction, the instruments used to characterize their efforts, and the implications this work has for teachers' implementations of an integrated approach to STEM education.…

Designing Project-Based Courses with a Focus on Group Formation and Assessment

ERIC Educational Resources Information Center

Richards, Debbie

2009-01-01

The value and the pitfalls of project and group work are well recognized. The principles and elements which apply to projects in general, apply to project-based courses. Thoughtful and detailed planning, understanding of the stakeholders and their needs, a good design, appropriate testing, monitoring and quality control and continual management…

A tracked robot with novel bio-inspired passive "legs".

PubMed

Sun, Bo; Jing, Xingjian

2017-01-01

For track-based robots, an important aspect is the suppression design, which determines the trafficability and comfort of the whole system. The trafficability limits the robot's working capability, and the riding comfort limits the robot's working effectiveness, especially with some sensitive instruments mounted on or operated. To these aims, a track-based robot equipped with a novel passive bio-inspired suspension is designed and studied systematically in this paper. Animal or insects have very special leg or limb structures which are good for motion control and adaptable to different environments. Inspired by this, a new track-based robot is designed with novel "legs" for connecting the loading wheels to the robot body. Each leg is designed with passive structures and can achieve very high loading capacity but low dynamic stiffness such that the robot can move on rough ground similar to a multi-leg animal or insect. Therefore, the trafficability and riding comfort can be significantly improved without losing loading capacity. The new track-based robot can be well applied to various engineering tasks for providing a stable moving platform of high mobility, better trafficability and excellent loading capacity.

Creative Disruption: A Task-Based Approach to Engaging With Original Works of Art

ERIC Educational Resources Information Center

Walker, Keith; Smith, Liz

2004-01-01

This paper examines the value of a task-based approach to engaging with original works of art and focuses in particular upon the experiences of a group of PGCE Art and Design trainees when they visited an exhibition entitled, Air Guitar: Art Reconsidering Rock Music, to carry out given tasks. The extent to which a task-based approach might…

Designing Interaction for Next Generation Personal Computing

NASA Astrophysics Data System (ADS)

de Michelis, Giorgio; Loregian, Marco; Moderini, Claudio; Marti, Patrizia; Colombo, Cesare; Bannon, Liam; Storni, Cristiano; Susani, Marco

Over two decades of research in the field of Interaction Design and Computer Supported Cooperative Work convinced us that the current design of workstations no longer fits users’ needs. It is time to design new personal computers based on metaphors alternative to the desktop one. With this SIG, we are seeking to involve international HCI professionals into the challenges of designing products that are radically new and tackling the many different issues of modern knowledge workers. We would like to engage a wider cross-section of the community: our focus will be on issues of development and participation and the impact of different values in our work.

A new method for designing dual foil electron beam forming systems. I. Introduction, concept of the method

NASA Astrophysics Data System (ADS)

Adrich, Przemysław

2016-05-01

In Part I of this work existing methods and problems in dual foil electron beam forming system design are presented. On this basis, a new method of designing these systems is introduced. The motivation behind this work is to eliminate the shortcomings of the existing design methods and improve overall efficiency of the dual foil design process. The existing methods are based on approximate analytical models applied in an unrealistically simplified geometry. Designing a dual foil system with these methods is a rather labor intensive task as corrections to account for the effects not included in the analytical models have to be calculated separately and accounted for in an iterative procedure. To eliminate these drawbacks, the new design method is based entirely on Monte Carlo modeling in a realistic geometry and using physics models that include all relevant processes. In our approach, an optimal configuration of the dual foil system is found by means of a systematic, automatized scan of the system performance in function of parameters of the foils. The new method, while being computationally intensive, minimizes the involvement of the designer and considerably shortens the overall design time. The results are of high quality as all the relevant physics and geometry details are naturally accounted for. To demonstrate the feasibility of practical implementation of the new method, specialized software tools were developed and applied to solve a real life design problem, as described in Part II of this work.

Enhancing an Instructional Design Model for Virtual Reality-Based Learning

ERIC Educational Resources Information Center

Chen, Chwen Jen; Teh, Chee Siong

2013-01-01

In order to effectively utilize the capabilities of virtual reality (VR) in supporting the desired learning outcomes, careful consideration in the design of instruction for VR learning is crucial. In line with this concern, previous work proposed an instructional design model that prescribes instructional methods to guide the design of VR-based…

Taking Engineering Design out for a Spin

ERIC Educational Resources Information Center

Crismond, David; Soobyiah, Mark; Cain, Ryan

2013-01-01

This article highlights what inquiry and design have in common, and what makes engineering design uniquely different from inquiry. A case study is presented that gives students practice in conducting fair-test experiments, in troubleshooting to learn how to make designs better, and in building science-based explanations for how things work. The…

Towards the Successful Integration of Design Thinking in Industrial Design Education

ERIC Educational Resources Information Center

Mubin, Omar; Novoa, Mauricio; Al Mahmud, Abdullah

2016-01-01

This paper narrates a case study on design thinking based education work in an industrial design honours program. Student projects were developed in a multi-disciplinary setting across a Computing and Engineering faculty that allowed promoting technologically and user driven innovation strategies. A renewed culture and environment for Industrial…

Examining Pre-Service Teachers' Design Capacities for Web-Based 21st Century New Culture of Learning

ERIC Educational Resources Information Center

Chai, Ching Sing; Tan, Lynde; Deng, Feng; Koh, Joyce Hwee Ling

2017-01-01

Although there is an established body of work arguing that teachers' technological pedagogical content knowledge (TPACK) is necessary for designing ICT-integrated lessons, little is known about the relationships among teachers' beliefs about learning, their design dispositions, learning design practices and TPACK. Critical inquiry in this aspect…

Design of nanostructured-based glucose biosensors

NASA Astrophysics Data System (ADS)

Komirisetty, Archana; Williams, Frances; Pradhan, Aswini; Konda, Rajini B.; Dondapati, Hareesh; Samantaray, Diptirani

2012-04-01

This paper presents the design of glucose sensors that will be integrated with advanced nano-materials, bio-coatings and electronics to create novel devices that are highly sensitive, inexpensive, accurate, and reliable. In the work presented, a glucose biosensor and its fabrication process flow have been designed. The device is based on electrochemical sensing using a working electrode with bio-functionalized zinc oxide (ZnO) nano-rods. Among all metal oxide nanostructures, ZnO nano-materials play a significant role as a sensing element in biosensors due to their properties such as high isoelectric point (IEP), fast electron transfer, non-toxicity, biocompatibility, and chemical stability which are very crucial parameters to achieve high sensitivity. Amperometric enzyme electrodes based on glucose oxidase (GOx) are used due to their stability and high selectivity to glucose. The device also consists of silicon dioxide and titanium layers as well as platinum working and counter electrodes and a silver/silver chloride reference electrode. Currently, the biosensors are being fabricated using the process flow developed. Once completed, the sensors will be bio-functionalized and tested to characterize their performance, including their sensitivity and stability.

The Cultures of Contemporary Instructional Design Scholarship, Part Two: Developments Based on Constructivist and Critical Theory Foundations

ERIC Educational Resources Information Center

Willis, Jerry

2011-01-01

This article is the second in a series (see Willis, 2011) that looks at the current status of instructional design scholarship and theory. In this concluding article, the focus is on two cultures of ID work, one based on constructivist and interpretivist theory and the other based on critical theory and critical pedagogy. There are distinct…

Developing a Problem-Based Course Based on Needs Analysis to Enhance English Reading Ability of Thai Undergraduate Students

ERIC Educational Resources Information Center

Bosuwon, Takwa; Woodrow, Lindy

2009-01-01

This paper reports on a needs analysis underlying a proposed business English reading course using a problem-based learning approach designed to enhance English reading abilities of Thai undergraduate students. As part of a work in progress, the needs analysis survey was done prior to the course design with the major stakeholders in business and…

The Effectiveness of Worked Examples Associated with Presentation Format and Prior Knowledge: A Web-Based Experiment

ERIC Educational Resources Information Center

Hsiao, E-Ling

2010-01-01

The aim of this study is to explore whether presentation format and prior knowledge affect the effectiveness of worked examples. The experiment was conducted through a specially designed online instrument. A 2X2X3 factorial before-and-after design was conducted. Three-way ANOVA was employed for data analysis. The result showed first, that prior…

Wide-Spectrum Microscope with a Long Working Distance Aspherical Objective Based on Obscuration Constraint

PubMed Central

Wang, Weibo; Wang, Chao; Liu, Jian; Tan, Jiubin

2016-01-01

We present an approach for an initial configuration design based on obscuration constraint and on-axis Taylor series expansion to realize the design of long working distance microscope (numerical aperture (NA) = 0.13 and working distance (WD) = 525 mm) with a low obscuration aspherical Schwarzschild objective in wide-spectrum imaging (λ = 400–900 nm). Experiments of the testing on the resolution target and inspection on United States Air Force (USAF) resolution chart and a line charge-coupled device (CCD) (pixel size of 14 μm × 56 μm) with different wavelength light sources (λ = 480 nm, 550 nm, 660 nm, 850 nm) were implemented to verify the validity of the proposed method. PMID:27834874

Design analysis of a Helium re-condenser

NASA Astrophysics Data System (ADS)

Muley, P. K.; Bapat, S. L.; Atrey, M. D.

2017-02-01

Modern helium cryostats deploy a cryocooler with a re-condenser at its II stage for in-situ re-condensation of boil-off vapor. The present work is a vital step in the ongoing research work of design of cryocooler based 100 litre helium cryostat with in-situ re-condensation. The cryostat incorporates a two stage Gifford McMahon cryocooler having specified refrigerating capacity of 40 W at 43 K for I stage and 1 W at 4.2 K for II stage. Although design of cryostat ensures thermal load for cryocooler below its specified refrigerating capacity at the second stage, successful in-situ re-condensation depends on proper design of re-condenser which forms the objective of this work. The present work proposes design of helium re-condenser with straight rectangular fins. Fins are analyzed for optimization of thermal performance parameters such as condensation heat transfer coefficient, surface area for heat transfer, re-condensing capacity, efficiency and effectiveness. The present work provides design of re-condenser with 19 integral fins each of 10 mm height and 1.5 mm thickness with a gap of 1.5 mm between two fins, keeping in mind the manufacturing feasibility, having efficiency of 80.96 % and effectiveness of 10.34.

Design of electrostatically levitated micromachined rotational gyroscope based on UV-LIGA technology

NASA Astrophysics Data System (ADS)

Cui, Feng; Chen, Wenyuan; Su, Yufeng; Zhang, Weiping; Zhao, Xiaolin

2004-12-01

The prevailing micromachined vibratory gyroscope typically has a proof mass connected to the substrate by a mechanical suspension system, which makes it face a tough challenge to achieve tactical or inertial grade performance levels. With a levitated rotor as the proof mass, a micromachined rotational gyroscope will potentially have higher performance than vibratory gyroscope. Besides working as a moment rebalance dual-axis gyroscope, the micromachined rotational gyroscope based on a levitated rotor can simultaneously work as a force balance tri-axis accelerometer. Micromachined rotational gyroscope based on an electrostatically levitated silicon micromachined rotor has been notably developed. In this paper, factors in designing a rotational gyro/accelerometer based on an electrostatically levitated disc-like rotor, including gyroscopic action of micro rotor, methods of stable levitation, micro displacement detection and control, rotation drive and speed control, vacuum packaging and microfabrication, are comprehensively considered. Hence a design of rotational gyro/accelerometer with an electroforming nickel rotor employing low cost UV-LIGA technology is presented. In this design, a wheel-like flat rotor is proposed and its basic dimensions, diameter and thickness, are estimated according to the required loading capability. Finally, its micromachining methods based on UV-LIGA technology and assembly technology are discussed.

Working memory and the design of health materials: a cognitive factors perspective.

PubMed

Wilson, Elizabeth A H; Wolf, Michael S

2009-03-01

Working memory and other supportive cognitive processes involved in learning are reviewed in the context of developing patient education materials. We specifically focus on the impact of certain design factors such as text format and syntax, the inclusion of images, and the choice of modality on individuals' ability to understand and remember health information. A selective review of relevant cognitive and learning theories is discussed with regard to their potential impact on the optimal design of health materials. Working memory is measured as an individual's capacity to hold and manipulate information in active consciousness. It is limited by necessity, and well-designed health materials can effectively minimize extraneous cognitive demands placed on individuals, making working memory resources more available to better process content-related information. Further research is needed to evaluate specific design principles and identify ideal uses of print versus video-based forms of communication for conveying information. The process of developing health materials should account for the cognitive demands that extrinsic factors such as modality place on patients.

A WEB based approach in biomedical engineering design education.

PubMed

Enderle, J D; Browne, A F; Hallowell, M B

1997-01-01

As part of the accreditation process for university engineering programs, students are required to complete a minimum number of design credits in their course of study, typically at the senior level. Many call this the capstone course. Engineering design is a course or series of courses that bring together concepts and principles that students learn in their field of study--it involves the integration and extension of material learned in their major toward a specific project. Most often, the student is exposed to system-wide analysis, critique and evaluation for the first time. Design is an iterative, decision making process in which the student optimally applies previously learned material to meet a stated objective. At the University of Connecticut, students work in teams of 3-4 members and work on externally sponsored projects. To facilitate working with sponsors, a WEB based approach is used for reporting the progress on projects. Students are responsible for creating their own WEB sites that support both html and pdf formats. Students provide the following deliverables: weekly progress reports, project statement, specifications, project proposal, interim report, and final report. A senior design homepage also provides links to data books and other resources for use by students. We are also planning distance learning experiences between two campuses so students can work on projects that involve the use of video conferencing.

Design of robotic cells based on relative handling modules with use of SolidWorks system

NASA Astrophysics Data System (ADS)

Gaponenko, E. V.; Anciferov, S. I.

2018-05-01

The article presents a diagramed engineering solution for a robotic cell with six degrees of freedom for machining of complex details, consisting of the base with a tool installation module and a detail machining module made as parallel structure mechanisms. The output links of the detail machining module and the tool installation module can move along X-Y-Z coordinate axes each. A 3D-model of the complex is designed in the SolidWorks system. It will be used further for carrying out engineering calculations and mathematical analysis and obtaining all required documentation.

Electron work function-a promising guiding parameter for material design.

PubMed

Lu, Hao; Liu, Ziran; Yan, Xianguo; Li, Dongyang; Parent, Leo; Tian, Harry

2016-04-14

Using nickel added X70 steel as a sample material, we demonstrate that electron work function (EWF), which largely reflects the electron behavior of materials, could be used as a guide parameter for material modification or design. Adding Ni having a higher electron work function to X70 steel brings more "free" electrons to the steel, leading to increased overall work function, accompanied with enhanced e(-)-nuclei interactions or higher atomic bond strength. Young's modulus and hardness increase correspondingly. However, the free electron density and work function decrease as the Ni content is continuously increased, accompanied with the formation of a second phase, FeNi3, which is softer with a lower work function. The decrease in the overall work function corresponds to deterioration of the mechanical strength of the steel. It is expected that EWF, a simple but fundamental parameter, may lead to new methodologies or supplementary approaches for metallic materials design or tailoring on a feasible electronic base.

[Present state and problems of work environment control in the workplaces using hazardous materials based on the Occupational Safety and Health Act in Japan].

PubMed

Hori, Hajime

2013-10-01

In Japan, working environment measurement is prescribed in the designated workplaces using hazardous materials. Measurements should be carried out periodically and countermeasures are performed depending on the results. By introducing such a system, working environments have remarkably improved. However, in the designated workplaces, measurements should be continued even in work environments found safe. On the other hand, measurement need not be obliged for non-designated workplaces even if hazardous materials are utilized.In the United States of America and many European countries, work environment management and work management are carried out by measuring personal exposure concentrations. In Japan, the Ministry of Health, Labour and Welfare is now discussing the introduction of personal exposure monitoring. However, many problems exist to prevent the simple introduction of American and European methods. This paper describes the brief history, present state and problems of work environment control in Japan, comparing with the systems of American and European countries.

Electron work function–a promising guiding parameter for material design

PubMed Central

Lu, Hao; Liu, Ziran; Yan, Xianguo; Li, Dongyang; Parent, Leo; Tian, Harry

2016-01-01

Using nickel added X70 steel as a sample material, we demonstrate that electron work function (EWF), which largely reflects the electron behavior of materials, could be used as a guide parameter for material modification or design. Adding Ni having a higher electron work function to X70 steel brings more “free” electrons to the steel, leading to increased overall work function, accompanied with enhanced e−–nuclei interactions or higher atomic bond strength. Young’s modulus and hardness increase correspondingly. However, the free electron density and work function decrease as the Ni content is continuously increased, accompanied with the formation of a second phase, FeNi3, which is softer with a lower work function. The decrease in the overall work function corresponds to deterioration of the mechanical strength of the steel. It is expected that EWF, a simple but fundamental parameter, may lead to new methodologies or supplementary approaches for metallic materials design or tailoring on a feasible electronic base. PMID:27074974

Ergonomic design and evaluation of a diagnostic ultrasound transducer holder.

PubMed

Ghasemi, Mohamad Sadegh; Hosseinzadeh, Payam; Zamani, Farhad; Ahmadpoor, Hossein; Dehghan, Naser

2017-12-01

Work-related musculoskeletal disorders (WMSDs) are injuries and disorders that affect the body's movement and musculoskeletal system. Awkward postures represent one of the major ergonomic risk factors that cause WMSDs among sonographers while working with an ultrasound transducer. This study aimed to design and evaluate a new holder for the ultrasound transducer. In the first phase a new holder was designed for the transducer, considering design principles. Evaluation of the new holder was then carried out by electrogoniometry and a locally perceived discomfort (LPD) scale. The application of design principles to the new holder resulted in an improvement of wrist posture and comfort. Wrist angles in extension, flexion, radial deviation and ulnar deviation were lower with utilization of the new holder. The severity of discomfort based on the LPD method in the two modes of work with and without the new holder was reported with values of 1.3 and 1.8, respectively (p < 0.05). Overall, this study indicated that applying ergonomics design principles was effective in minimizing wrist deviation and increasing comfort while working with the new holder.

A K-Band Low-Power Phase Shifter Based on Injection Locked Oscillator in 0.13 μm CMOS Technology

NASA Astrophysics Data System (ADS)

Qiu, Qi-Lin; Yu, Xiao-Peng; Sui, Wen-Quan

2017-11-01

In this paper, the design challenges of the injection-locked oscillator (ILO)-based phase shifter are reviewed and analyzed. The key design considerations such as the operating frequency, locking range, and linearity of the phase shifters are analysed in detail. It is possible to optimize the phase shifter in certain parameters such as ultra-low power while meeting the requirements of a certain system. As a design example, a K-band phase shifter is implemented using a commercial 0.13 μm CMOS technology, where a conventional LC tank based topology is implemented but optimised with a good balance among power consumption, working range, sensitivity, and silicon area, etc. Measurement results show that the proposed phase shift is able to work at 22-23.4 GHz with a range of 180∘ while consuming 3.14 mW from a 1.2 V supply voltage.

Understanding Academic Work as Practical Activity--and Preparing (Business-School) Academics for Praxis?

ERIC Educational Resources Information Center

Rasanen, Keijo

2009-01-01

This text suggests a way of framing academic work and outlines a design for a preparatory event based on this understanding. It conceives academic work as "practical activity" and potential "praxis" in emergence by focusing on four issues: how can I do this work (tactical stance), what can I accomplish and achieve in it…

The National Shipbuilding Research Program Executive Summary Robotics in Shipbuilding Workshop

DTIC Science & Technology

1981-01-01

based on technoeconomic analysis and consideration environment. of working c-c-2 (3) The conceptual designs were based on application of commercial...results of our study. We identified shipbuilding tasks that should be performed by industrial robots based on technoeconomic and working-life incentives...is the TV image of the illuminated workplaces. The image is analyzed by the computer. The analysis includes noise rejection and fitting of straight

A Longitudinal Assessment of the Effectiveness of a School-Based Mentoring Program in Middle School

ERIC Educational Resources Information Center

Nunez, Jose Carlos; Rosario, Pedro; Vallejo, Guillermo; Gonzalez-Pienda, Julio Antonio

2013-01-01

This work assessed the efficacy of a middle-school-based mentoring program designed to increase student use of self-regulated learning (SRL) strategies, self-efficacy for and the perceived usefulness of SRL as well as mathematics and language achievement. A longitudinal cluster randomized trial study design obtained evidence that found…

On the Use of Parmetric-CAD Systems and Cartesian Methods for Aerodynamic Design

NASA Technical Reports Server (NTRS)

Nemec, Marian; Aftosmis, Michael J.; Pulliam, Thomas H.

2004-01-01

Automated, high-fidelity tools for aerodynamic design face critical issues in attempting to optimize real-life geometry arid in permitting radical design changes. Success in these areas promises not only significantly shorter design- cycle times, but also superior and unconventional designs. To address these issues, we investigate the use of a parmetric-CAD system in conjunction with an embedded-boundary Cartesian method. Our goal is to combine the modeling capabilities of feature-based CAD with the robustness and flexibility of component-based Cartesian volume-mesh generation for complex geometry problems. We present the development of an automated optimization frame-work with a focus on the deployment of such a CAD-based design approach in a heterogeneous parallel computing environment.

A report on the USL NASA/RECON project. Part 2: PC-based R and D in support of IS and R applications

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Chum, Frank Y.; Hall, Philip P.; Moreau, Dennis R.; Triantafyllopoulos, Spiros

1984-01-01

This Working Paper Series entry describes the PC R and D development effort initiated as part of the NASA/RECON Project at the University of Southwestern Louisiana. This effort involves the development of a PC-based environment for the prototyping and evaluation of various tools designed to enhance the interaction between scientists and engineers and remote information systems. The design of PC-based tools for the enhancement of the NASA/RECON university-level courses is described as well as the design of a multi-functional PC-based workstation to support access to and processing of information from local, distributed, and remote sources. Course preparation activities are described in a companion report entitled A Report on the USL NASA/RECON Project: Part 1, the Development of a Transportable, University-Level, IS and R Educational Program, by Suzy Gallagher and Martin Granier, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-7.

Bootstrapping Methods Applied for Simulating Laboratory Works

ERIC Educational Resources Information Center

Prodan, Augustin; Campean, Remus

2005-01-01

Purpose: The aim of this work is to implement bootstrapping methods into software tools, based on Java. Design/methodology/approach: This paper presents a category of software e-tools aimed at simulating laboratory works and experiments. Findings: Both students and teaching staff use traditional statistical methods to infer the truth from sample…

Design of a trial-based economic evaluation on the cost-effectiveness of employability interventions among work disabled employees or employees at risk of work disability: The CASE-study

PubMed Central

2012-01-01

Background In the Netherlands, absenteeism and reduced productivity due to work disability lead to high yearly costs reaching almost 5% of the gross national product. To reduce the economic burden of sick leave and reduced productivity, different employability interventions for work-disabled employees or employees at risk of work disability have been developed. Within this study, called 'CASE-study' (Cost-effectiveness Analysis of Sustainable Employability), five different employability interventions directed at work disabled employees with divergent health complaints will be analysed on their effectiveness and cost-effectiveness. This paper describes a consistent and transparent methodological design to do so. Methods/design Per employability intervention 142 participants are needed whereof approximately 66 participants receiving the intervention will be compared with 66 participants receiving usual care. Based on the intervention-specific characteristics, a randomized control trial or a quasi-experiment with match-criteria will be conducted. Notwithstanding the study design, eligible participants will be employees aged 18 to 63, working at least 12 h per week, and at risk of work disability, or already work-disabled due to medical restrictions. The primary outcome will be the duration of sick leave. Secondary outcomes are health status and quality of life. Outcomes will be assessed at baseline and then 6, 12 and 18 months later. Economic costs will consist of healthcare costs and cost of lost production due to work disability, and will be evaluated from a societal perspective. Discussion The CASE-study is the first to conduct economic evaluations of multiple different employability interventions based on a similar methodological framework. The cost-effectiveness results for every employability intervention will be published in 2014, but the methods, strengths and weaknesses of the study protocol are discussed in this paper. To contribute to treatment options in occupational health practice and enable the development of guidelines on how to conduct economic evaluation better suited to this field; this paper provides an important first step. Trial registration Four trials involved in the CASE-study are registered with the Netherlands Trial Registry: Care for Work (NTR2886), Health and Motion (NTR3111), Guidance to Excel in Return to Work (NTR3151), Care for Companies/Second Care (NTR3136). PMID:22257557

Coordinating the Design and Management of Heterogeneous Datacenter Resources

ERIC Educational Resources Information Center

Guevara, Marisabel

2014-01-01

Heterogeneous design presents an opportunity to improve energy efficiency but raises a challenge in management. Whereas prior work separates the two, we coordinate heterogeneous design and management. We present a market-based resource allocation mechanism that navigates the performance and power trade-offs of heterogeneous architectures. Given…

Standardizing Interaction Design Education

ERIC Educational Resources Information Center

Thomassen, Aukje; Ozcan, Oguzhan

2010-01-01

The objective of this paper is to which extend the didactic format of studio-based group-work is applicable for creating a common-ground for Interaction Design Education in European Perspective. The current debate on design education shows us a landscape of different initiatives. So far difficulties have arisen in the area of accreditation and…

The Impact of New Learning Environments in an Engineering Design Course

ERIC Educational Resources Information Center

Dinsmore, Daniel L.; Alexander, Patricia A.; Loughlin, Sandra M.

2008-01-01

In this study, we investigated the effects of students' participation in a collaborative, project-based engineering design course on their domain knowledge, interests, and strategic processing. Participants were 70 college seniors working in teams on a design project of their choosing. Their declarative, procedural, and principled knowledge, along…

Integrated Design Engineering Analysis (IDEA) Environment - Aerodynamics, Aerothermodynamics, and Thermal Protection System Integration Module

NASA Technical Reports Server (NTRS)

Kamhawi, Hilmi N.

2011-01-01

This report documents the work performed during from March 2010 October 2011. The Integrated Design and Engineering Analysis (IDEA) environment is a collaborative environment based on an object-oriented, multidisciplinary, distributed environment using the Adaptive Modeling Language (AML) as the underlying framework. This report will focus on describing the work done in the area of extending the aerodynamics, and aerothermodynamics module using S/HABP, CBAERO, PREMIN and LANMIN. It will also detail the work done integrating EXITS as the TPS sizing tool.

The effect of the electronic medical record on nurses' work.

PubMed

Robles, Jane

2009-01-01

The electronic medical record (EMR) is a workplace reality for most nurses. Its advantages include a single consolidated record for each person; capacity for data interfaces and alerts; improved interdisciplinary communication; and evidence-based decision support. EMRs can add to work complexity, by forcing better documentation of previously unrecorded data and/or because of poor design. Well-designed and well-implemented computerized provider order entry (CPOE) systems can streamline nurses' work. Generational differences in acceptance of and facility with EMRs can be addressed through open, healthy communication.

Note: Ion source design for ion trap systems

NASA Astrophysics Data System (ADS)

Noriega, J. R.; Quevedo, M.; Gnade, B.; Vasselli, J.

2013-06-01

A small plasma (glow discharge) based ion source and circuit are described in this work. The ion source works by producing a high voltage pulsed discharge between two electrodes in a pressure range of 50-100 mTorr. A third mesh electrode is used for ion extraction. The electrodes are small stainless steel screws mounted in a MACOR ionization chamber in a linear arrangement. The electrode arrangement is driven by a circuit, design for low power operation. This design is a proof of concept intended for applications on small cylindrical ion traps.

Sociotechnical attributes of safe and unsafe work systems.

PubMed

Kleiner, Brian M; Hettinger, Lawrence J; DeJoy, David M; Huang, Yuang-Hsiang; Love, Peter E D

2015-01-01

Theoretical and practical approaches to safety based on sociotechnical systems principles place heavy emphasis on the intersections between social-organisational and technical-work process factors. Within this perspective, work system design emphasises factors such as the joint optimisation of social and technical processes, a focus on reliable human-system performance and safety metrics as design and analysis criteria, the maintenance of a realistic and consistent set of safety objectives and policies, and regular access to the expertise and input of workers. We discuss three current approaches to the analysis and design of complex sociotechnical systems: human-systems integration, macroergonomics and safety climate. Each approach emphasises key sociotechnical systems themes, and each prescribes a more holistic perspective on work systems than do traditional theories and methods. We contrast these perspectives with historical precedents such as system safety and traditional human factors and ergonomics, and describe potential future directions for their application in research and practice. The identification of factors that can reliably distinguish between safe and unsafe work systems is an important concern for ergonomists and other safety professionals. This paper presents a variety of sociotechnical systems perspectives on intersections between social--organisational and technology--work process factors as they impact work system analysis, design and operation.

Real-time design with peer tasks

NASA Technical Reports Server (NTRS)

Goforth, Andre; Howes, Norman R.; Wood, Jonathan D.; Barnes, Michael J.

1995-01-01

We introduce a real-time design methodology for large scale, distributed, parallel architecture, real-time systems (LDPARTS), as an alternative to those methods using rate or dead-line monotonic analysis. In our method the fundamental units of prioritization, work items, are domain specific objects with timing requirements (deadlines) found in user's specification. A work item consists of a collection of tasks of equal priority. Current scheduling theories are applied with artifact deadlines introduced by the designer whereas our method schedules work items to meet user's specification deadlines (sometimes called end-to-end deadlines). Our method supports these scheduling properties. Work item scheduling is based on domain specific importance instead of task level urgency and still meets as many user specification deadlines as can be met by scheduling tasks with respect to urgency. Second, the minimum (closest) on-line deadline that can be guaranteed for a work item of highest importance, scheduled at run time, is approximately the inverse of the throughput, measured in work items per second. Third, throughput is not degraded during overload and instead of resorting to task shedding during overload, the designer can specify which work items to shed. We prove these properties in a mathematical model.

Systematic design of broadband path-coiling acoustic metamaterials

NASA Astrophysics Data System (ADS)

Jia, Zhetao; Li, Junfei; Shen, Chen; Xie, Yangbo; Cummer, Steven A.

2018-01-01

A design approach for acoustic metamaterial unit cells based on a coiled path with impedance matching layers (IMLs) is proposed in this paper. A theoretical approach is developed to calculate the transmission of the labyrinthine unit cells with different effective refractive indices. The IML is introduced to broaden the transmission bandwidth and produce a lower envelope boundary of transmission for unit cells of different effective refractive indices. According to the theory, cells of all effective refractive indices can be built to achieve unitary transmission at center working frequencies. The working frequency can be tuned by adjusting the length of the IML. Numerical simulations based on finite element analysis are used to validate the theoretical predictions. The high transmission and low dispersive index nature of our designs are further verified by experiments within a broad frequency band of over 1.4 kHz centered at 2.86 kHz. Our design approach can be useful in various wavefront engineering applications.

Secondary optics for Fresnel lens solar concentrators

NASA Astrophysics Data System (ADS)

Fu, Ling; Leutz, Ralf; Annen, Hans Philipp

2010-08-01

Secondary optics are used in concentrating photovoltaic (CPV) systems with Fresnel lens primaries to increase the optical system efficiency by catching refracted light that otherwise would miss the receiver, better the tracking tolerance (acceptance half-angle) and enhance the flux uniformity on the cell. Several refractive secondary optics under the same Fresnel lens primary are designed, analyzed and compared based on their optical performances, materials, manufacturability, manufacturing tolerancing and cost. The goal of this work is to show the basic two different design approaches statistical mixing as opposed to deterministic mixing. Caustics are elementary in the deterministic tailoring approach. We find that statistical mixing offers higher flexibility for the solar application. It is also shown that there are conventional, i.e. designs based on conic section ("half-egg") that work well as solar secondaries. It is also made clear that primary and secondary must be designed as optical train.

Integrated layout based Monte-Carlo simulation for design arc optimization

NASA Astrophysics Data System (ADS)

Shao, Dongbing; Clevenger, Larry; Zhuang, Lei; Liebmann, Lars; Wong, Robert; Culp, James

2016-03-01

Design rules are created considering a wafer fail mechanism with the relevant design levels under various design cases, and the values are set to cover the worst scenario. Because of the simplification and generalization, design rule hinders, rather than helps, dense device scaling. As an example, SRAM designs always need extensive ground rule waivers. Furthermore, dense design also often involves "design arc", a collection of design rules, the sum of which equals critical pitch defined by technology. In design arc, a single rule change can lead to chain reaction of other rule violations. In this talk we present a methodology using Layout Based Monte-Carlo Simulation (LBMCS) with integrated multiple ground rule checks. We apply this methodology on SRAM word line contact, and the result is a layout that has balanced wafer fail risks based on Process Assumptions (PAs). This work was performed at the IBM Microelectronics Div, Semiconductor Research and Development Center, Hopewell Junction, NY 12533

Collaboration through Flickr & Skype: Can Web 2.0 Technology Substitute the Traditional Design Studio in Higher Design Education?

ERIC Educational Resources Information Center

Fleischmann, Katja

2014-01-01

Technology has not only changed the work practice of designers but also how design is taught and learned. The emergence of digital technology has made computer labs a central learning space for design students. Since this change, studio-based learning in its traditional sense appears to be in decline in higher education institutions. This is in…

Examining Teacher Talk in an Engineering Design-Based Science Curricular Unit

NASA Astrophysics Data System (ADS)

Aranda, Maurina L.; Lie, Richard; Selcen Guzey, S.; Makarsu, Murat; Johnston, Amanda; Moore, Tamara J.

2018-03-01

Recent science education reforms highlight the importance for teachers to implement effective instructional practices that promote student learning of science and engineering content and their practices. Effective classroom discussion has been shown to support the learning of science, but work is needed to examine teachers' enactment of engineering design-based science curricula by focusing on the content, complexity, structure, and orchestration of classroom discussions. In the present study, we explored teacher-student talk with respect to science in a middle school curriculum focused on genetics and genetic engineering. Our study was guided by the following major research question: What are the similarities and differences in teacher talk moves that occurred within an engineering design-based science unit enacted by two teachers? Through qualitative and quantitative approaches, we found that there were clear differences in two teachers' use of questioning strategies and presentation of new knowledge that affected the level of student involvement in classroom discourse and the richness and details of student contributions to the conversations. We also found that the verbal explanations of science content differed between two teachers. Collectively, the findings in this study demonstrate that although the teachers worked together to design an engineering designed-based science curriculum unit, their use of different discussion strategies and patterns, and interactions with students differed to affect classroom discourse.

Two Undergraduate Projects for Data Acquisition and Control

NASA Astrophysics Data System (ADS)

Hiersche, Kelly; Pena, Tara; Grogan, Tanner; Wright, Matthew

We are designing two separate instruments for use in our undergraduate laboratory. In the first project, a Raspberry Pi is used to simultaneously monitor a large number of current and voltage readings and store them in a database. In our second project, we are constructing our own microcontrollers to work as a general-purpose interface based off work carried out in Review of Scientific Instruments 84, 103101 (2013). It was designed for low cost and simple construction, making it ideal for undergraduate level work. This circuit has room for two interchangeable daughter boards, giving it the capability to work as a general lab interface, lock-in detector, or waveform generator.

Beyond Mechanism Design

NASA Technical Reports Server (NTRS)

Wolpert, David H.; Turner, Kagan

2004-01-01

The field of mechanism design is concerned with setting (incentives superimposed on) the utility functions of a group of players so as to induce desirable joint behavior of those players. It arose in the context of traditional equilibrium game theory applied to games involving human players. This has led it to have many implicit restrictions, which strongly limits its scope. In particular, it ignores many issues that are crucial for systems that are large (and therefore far off-equilibrium in general) and/or composed of non-human players (e.g., computer-based agents). This also means it has concentrated on issues that are often irrelevant in those broader domains (e.g., incentive compatibility). This paper illustrates these shortcomings by reviewing some of the recent theoretical work on the design of collectives, a body of work that constitutes a substantial broadening of mechanism design. It then presents computer experiments based on a recently suggested nanotechnology testbed that demonstrates the power of that extended version of mechanism design.

Recent Advances and Current Trends in Metamaterial-by-Design

NASA Astrophysics Data System (ADS)

Anselmi, N.; Gottardi, G.

2018-02-01

Thanks to their potential applications in several engineering areas, metamaterials gained much of attentions among different research communities, leading to the development of several analysis and synthesis tools. In this context, the metamaterial-by-design (MbD) paradigm has been recently introduced as a powerful tool for the design of complex metamaterials-based structures. In this work a review of the state-of-art, as well as the recent advancements of MbD-based methods are presented.

Color as a language in architecture

NASA Astrophysics Data System (ADS)

Smedal, Grete

2002-06-01

This paper takes into consideration the role of color as a non-verbal language between human beings and the environment. The communication is based on the function of the color vision to separate and identify. A language about color can be based on the same. The concept behind the Natural Color System is color differentiation and color identification, which I find very useful both in color education of design students and in environmental color design work. A commission to plan the exterior use of color for a whole mining town on 78 degree(s) North in Longyearbyen, Spitsbergen, will illustrate my ideas. This will serve as an example of how these different 'languages' can work together. After a twenty years ongoing process this work is now almost fulfilled and the result will be shown in the presentation.

Synthesis Methods for Robust Passification and Control

NASA Technical Reports Server (NTRS)

Kelkar, Atul G.; Joshi, Suresh M. (Technical Monitor)

2000-01-01

The research effort under this cooperative agreement has been essentially the continuation of the work from previous grants. The ongoing work has primarily focused on developing passivity-based control techniques for Linear Time-Invariant (LTI) systems. During this period, there has been a significant progress made in the area of passivity-based control of LTI systems and some preliminary results have also been obtained for nonlinear systems, as well. The prior work has addressed optimal control design for inherently passive as well as non- passive linear systems. For exploiting the robustness characteristics of passivity-based controllers the passification methodology was developed for LTI systems that are not inherently passive. Various methods of passification were first proposed in and further developed. The robustness of passification was addressed for multi-input multi-output (MIMO) systems for certain classes of uncertainties using frequency-domain methods. For MIMO systems, a state-space approach using Linear Matrix Inequality (LMI)-based formulation was presented, for passification of non-passive LTI systems. An LMI-based robust passification technique was presented for systems with redundant actuators and sensors. The redundancy in actuators and sensors was used effectively for robust passification using the LMI formulation. The passification was designed to be robust to an interval-type uncertainties in system parameters. The passification techniques were used to design a robust controller for Benchmark Active Control Technology wing under parametric uncertainties. The results on passive nonlinear systems, however, are very limited to date. Our recent work in this area was presented, wherein some stability results were obtained for passive nonlinear systems that are affine in control.

Teaching habitat and animal classification to fourth graders using an engineering-design model

NASA Astrophysics Data System (ADS)

Marulcu, Ismail

2014-05-01

Background: The motivation for this work is built upon the premise that there is a need for research-based materials for design-based science instruction. In this paper, a small portion of our work investigating the impact of a LEGOTM engineering unit on fourth grade students' preconceptions and understanding of animals is presented. Purpose: The driving questions for our work are: (1) What is the impact of an engineering-design-based curricular module on students' understanding of habitat and animal classification? (2) What are students' misconceptions regarding animal classification and habitat? Sample: The study was conducted in an inner-city K-8 school in the northeastern region of the United States. There were two fourth grade classrooms in the school. The first classroom included seven girls and nine boys, whereas the other classroom included eight girls and eight boys. All fourth grade students participated in the study. Design and methods: In answering the research questions mixed-method approaches are used. Data collection methods included pre- and post-tests, pre- and post-interviews, student journals, and classroom observations. Identical pre- and post-tests were administered to measure students' understanding of animals. They included four multiple-choice and six open-ended questions. Identical pre- and post-interviews were administered to explore students' in-depth understanding of animals. Results: Our results show that students significantly increased their performance after instruction on both the multiple-choice questions (t = -3.586, p = .001) and the open-ended questions (t = -5.04, p = .000). They performed better on the post interviews as well. Also, it is found that design-based instruction helped students comprehend core concepts of a life science subject, animals. Conclusions: Based on these results, the main argument of the study is that engineering design is a useful framework for teaching not only physical science-related subjects, but also life science subjects in elementary science classrooms.

The CAL: cognitive, apperceptive and representative aspects of fashion design - Side note to neuroaesthetic theory

NASA Astrophysics Data System (ADS)

Csanák, Edit

2017-10-01

This article deals with the creative and cognitive process of the creative work from the aspect of fashion design. It is examined through the Cognitive-Apperceptive-Limn process (The CAL), analysing the stages of design work referring to prominent literature, and discussing exciting theories, such the FLOW and the AHA effects are, and the neuro aesthetic theory. Setting them into a new context, the article offers a fresh approach of a designer, rather than a scientific statement based on pragmatic findings. Since theories on artistic performance and creativity can never be enough ‘empirical’, and the process can be never understood enough well…

Design of Composite Structures Using Knowledge-Based and Case Based Reasoning

NASA Technical Reports Server (NTRS)

Lambright, Jonathan Paul

1996-01-01

A method of using knowledge based and case based reasoning to assist designers during conceptual design tasks of composite structures was proposed. The cooperative use of heuristics, procedural knowledge, and previous similar design cases suggests a potential reduction in design cycle time and ultimately product lead time. The hypothesis of this work is that the design process of composite structures can be improved by using Case-Based Reasoning (CBR) and Knowledge-Based (KB) reasoning in the early design stages. The technique of using knowledge-based and case-based reasoning facilitates the gathering of disparate information into one location that is easily and readily available. The method suggests that the inclusion of downstream life-cycle issues into the conceptual design phase reduces potential of defective, and sub-optimal composite structures. Three industry experts were interviewed extensively. The experts provided design rules, previous design cases, and test problems. A Knowledge Based Reasoning system was developed using the CLIPS (C Language Interpretive Procedural System) environment and a Case Based Reasoning System was developed using the Design Memory Utility For Sharing Experiences (MUSE) xviii environment. A Design Characteristic State (DCS) was used to document the design specifications, constraints, and problem areas using attribute-value pair relationships. The DCS provided consistent design information between the knowledge base and case base. Results indicated that the use of knowledge based and case based reasoning provided a robust design environment for composite structures. The knowledge base provided design guidance from well defined rules and procedural knowledge. The case base provided suggestions on design and manufacturing techniques based on previous similar designs and warnings of potential problems and pitfalls. The case base complemented the knowledge base and extended the problem solving capability beyond the existence of limited well defined rules. The findings indicated that the technique is most effective when used as a design aid and not as a tool to totally automate the composites design process. Other areas of application and implications for future research are discussed.

A Studio Project Based on the Events of September 11

ERIC Educational Resources Information Center

Ruby, Nell

2004-01-01

A week after the 9/11 WTC event, the collage project that Nell Ruby and her class had been working on in a basic design classroom lacked relevance. They had been working from master works, analyzing hue and value relationships, color schemes, shape, and composition. The master works seemed unimportant because of the immense emotional impact of the…

Impact of Decoding Work within a Professional Program

ERIC Educational Resources Information Center

Yeo, Michelle; Lafave, Mark; Westbrook, Khatija; McAllister, Jenelle; Valdez, Dennis; Eubank, Breda

2017-01-01

This chapter demonstrates how Decoding work can be used productively within a curriculum change process to help make design decisions based on a more nuanced understanding of student learning and the relationship of a professional program to the field.

"Life Could Be a Dream": What US-Based Management PhD Students Desire in an Initial Academic Appointment

ERIC Educational Resources Information Center

Flynn, C. Brian; Feild, Hubert S.; Bedeian, Arthur G.

2011-01-01

Purpose: The purpose of this paper is to first identify the work- and non-work-related criteria US-based management doctoral students consider important in selecting an initial academic appointment, and second, to explore whether gender and race/ethnicity are associated with the importance attached to these criteria. Design/methodology/approach:…

People Who Live in Glass Houses. Youth Training Scheme. Core Exemplar Work Based Project.

ERIC Educational Resources Information Center

Further Education Staff Coll., Blagdon (England).

This trainer's guide is intended to assist supervisors of work-based career training projects in helping students compare the advantages and disadvantages of buying or building a greenhouse, make a decision within cost constraints, and execute the task under supervision. This project is designed to meet the needs of trainees who are of low…

Evaluating a Teaching Module on Ethically Responsible Evidence-Based Practice Decision Making in an Advanced Micro Practice Course

ERIC Educational Resources Information Center

Wong, Rose

2017-01-01

This article adds to the growing body of literature on the use of evidence-based practice (EBP) in social work. Specifically, it examines a 9-hour EBP educational model designed to prepare MSW students for appropriate decision-making strategies in working with multicultural client populations. The model places emphasis on identification and…

Analyzing SystemC Designs: SystemC Analysis Approaches for Varying Applications

PubMed Central

Stoppe, Jannis; Drechsler, Rolf

2015-01-01

The complexity of hardware designs is still increasing according to Moore's law. With embedded systems being more and more intertwined and working together not only with each other, but also with their environments as cyber physical systems (CPSs), more streamlined development workflows are employed to handle the increasing complexity during a system's design phase. SystemC is a C++ library for the design of hardware/software systems, enabling the designer to quickly prototype, e.g., a distributed CPS without having to decide about particular implementation details (such as whether to implement a feature in hardware or in software) early in the design process. Thereby, this approach reduces the initial implementation's complexity by offering an abstract layer with which to build a working prototype. However, as SystemC is based on C++, analyzing designs becomes a difficult task due to the complex language features that are available to the designer. Several fundamentally different approaches for analyzing SystemC designs have been suggested. This work illustrates several different SystemC analysis approaches, including their specific advantages and shortcomings, allowing designers to pick the right tools to assist them with a specific problem during the design of a system using SystemC. PMID:25946632

Analyzing SystemC Designs: SystemC Analysis Approaches for Varying Applications.

PubMed

Stoppe, Jannis; Drechsler, Rolf

2015-05-04

The complexity of hardware designs is still increasing according to Moore's law. With embedded systems being more and more intertwined and working together not only with each other, but also with their environments as cyber physical systems (CPSs), more streamlined development workflows are employed to handle the increasing complexity during a system's design phase. SystemC is a C++ library for the design of hardware/software systems, enabling the designer to quickly prototype, e.g., a distributed CPS without having to decide about particular implementation details (such as whether to implement a feature in hardware or in software) early in the design process. Thereby, this approach reduces the initial implementation's complexity by offering an abstract layer with which to build a working prototype. However, as SystemC is based on C++, analyzing designs becomes a difficult task due to the complex language features that are available to the designer. Several fundamentally different approaches for analyzing SystemC designs have been suggested. This work illustrates several different SystemC analysis approaches, including their specific advantages and shortcomings, allowing designers to pick the right tools to assist them with a specific problem during the design of a system using SystemC.

Designing Place-Based Interventions for Sustainability and Replicability: The Case of GO! Austin/VAMOS! Austin

PubMed Central

Hussaini, Aliya; Pulido, Carmen Llanes; Basu, Semonti; Ranjit, Nalini

2018-01-01

Place-based health efforts account for the role of the community environment in shaping decisions and circumstances that affect population well-being. Such efforts, rooted as they are in the theory that health is socially determined, mobilize resources for health promotion that are not typically used, and offer a more informed and robust way of promoting health outcomes within a community. Common criticisms of place-based work include the difficulty of replication, since engagement is so specific to a place, and limited sustainability of the work, in the absence of continued institutional structures, both within the community and supporting structures outside the community, to keep these initiatives resilient. This paper describes a place-based initiative, GO! Austin/VAMOS! Austin (GAVA), which was designed to harness the strengths of place-based work—namely, its specificity to place and community. From the start, the project was designed to balance this specificity with a focus on developing and utilizing a standardized set of evidence-informed implementation and evaluation approaches and tools that were flexible enough to be modified for specific settings. This was accompanied by an emphasis on leadership and capacity building within resident leaders, which provided for informed intervention and demand building capacity, but also for longevity as partners, philanthropic, and otherwise, moved in and out of the work. PMID:29623272

Study on general design of dual-DMD based infrared two-band scene simulation system

NASA Astrophysics Data System (ADS)

Pan, Yue; Qiao, Yang; Xu, Xi-ping

2017-02-01

Mid-wave infrared(MWIR) and long-wave infrared(LWIR) two-band scene simulation system is a kind of testing equipment that used for infrared two-band imaging seeker. Not only it would be qualified for working waveband, but also realize the essence requests that infrared radiation characteristics should correspond to the real scene. Past single-digital micromirror device (DMD) based infrared scene simulation system does not take the huge difference between targets and background radiation into account, and it cannot realize the separated modulation to two-band light beam. Consequently, single-DMD based infrared scene simulation system cannot accurately express the thermal scene model that upper-computer built, and it is not that practical. To solve the problem, we design a dual-DMD based, dual-channel, co-aperture, compact-structure infrared two-band scene simulation system. The operating principle of the system is introduced in detail, and energy transfer process of the hardware-in-the-loop simulation experiment is analyzed as well. Also, it builds the equation about the signal-to-noise ratio of infrared detector in the seeker, directing the system overall design. The general design scheme of system is given, including the creation of infrared scene model, overall control, optical-mechanical structure design and image registration. By analyzing and comparing the past designs, we discuss the arrangement of optical engine framework in the system. According to the main content of working principle and overall design, we summarize each key techniques in the system.

Structure-based drug design enables conversion of a DFG-in binding CSF-1R kinase inhibitor to a DFG-out binding mode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyers, Marvin J.; Pelc, Matthew; Kamtekar, Satwik

2010-08-11

The work described herein demonstrates the utility of structure-based drug design (SBDD) in shifting the binding mode of an HTS hit from a DFG-in to a DFG-out binding mode resulting in a class of novel potent CSF-1R kinase inhibitors suitable for lead development.

Renovation of a Mechanical Engineering Senior Design Class to an Industry-Tied and Team-Oriented Course

ERIC Educational Resources Information Center

Liu, Yucheng

2017-01-01

In this work, an industry-based and team-oriented education model was established based on a traditional mechanical engineering (ME) senior design class in order to better prepare future engineers and leaders so as to meet the increasing demand for high-quality engineering graduates. In the renovated curriculum, industry-sponsored projects became…

Design and Evaluation of a Microprocessor Course Combining Three Cooperative Methods: SDLA, PjBL and CnBL

ERIC Educational Resources Information Center

Alorda, B.; Suenaga, K.; Pons, P.

2011-01-01

This paper reports on the design, implementation and assessment of a new approach course structure based on the combination of three cooperative methodologies. The main goal is to reduce the percentage of non-passed students focusing the learning process on students by offering different alternatives and motivational activities based on working in…

Incentives and barriers to physical activity for working women.

PubMed

Jaffee, L; Lutter, J M; Rex, J; Hawkes, C; Bucaccio, P

1999-01-01

A questionnaire was completed by 393 working women to examine incentives and barriers to physical activity based on the stages of change from the transtheoretical model. Using Chi Square tests, differences were found across the five stages suggesting that work site programs be designed and tailored for women at different stages of readiness.

An Intensive Continuing Education Initiative to Train Social Workers for Military Social Work Practice

ERIC Educational Resources Information Center

Smith-Osborne, Alexa

2015-01-01

Specific standards exist for social work practice with service members, military families, and veterans, whether in civilian or military practice settings. Based on these standards, a continuing education certificate for practitioners was designed with companion military social work coursework in the advanced graduate curriculum and field…

Phase II, improved work zone design guidelines and enhanced model of traffic delays in work zones : final report, March 2009.

DOT National Transportation Integrated Search

2009-03-01

This project contains three major parts. In the first part a digital computer simulation model was developed with the aim to model the traffic through a freeway work zone situation. The model was based on the Arena simulation software and used cumula...

Equipped for the Future. Preparing for Work: A Guide for Business

ERIC Educational Resources Information Center

Center for Literacy Studies, University of Tennessee (NJ3), 2011

2011-01-01

"Preparing for Work," developed by Equipped for the Future at the Center for Literacy Studies, University of Tennessee, is a skills-based course designed for implementation in organizations and agencies involved in preparing their clients and students for entry level work. Each of the instructional modules that comprise the…

Phase II, improved work zone design guidelines and enhanced model of traffic delays in work zones : executive summary report.

DOT National Transportation Integrated Search

2009-03-01

This project contains three major parts. In the first part a digital computer simulation model was developed with the aim to model the traffic through a freeway work zone situation. The model was based on the Arena simulation software and used cumula...

Development and preliminary validation of an index for indicating the risks of the design of working hours to health and wellbeing.

PubMed

Schomann, Carsten; Giebel, Ole; Nachreiner, Friedhelm

2006-01-01

BASS 4, a computer program for the design and evaluation of workings hours, is an example of an ergonomics-based software tool that can be used by safety practitioners at the shop floor with regard to legal, ergonomic, and economic criteria. Based on experiences with this computer program, a less sophisticated Working-Hours-Risk Index for assessing the quality of work schedules (including flexible work hours) to indicate risks to health and wellbeing has been developed to provide a quick and easy applicable tool for legally required risk assessments. The results of a validation study show that this risk index seems to be a promising indicator for predicting risks of health complaints and wellbeing. The purpose of the Risk Index is to simplify the evaluation process at the shop floor and provide some more general information about the quality of a work schedule that can be used for triggering preventive interventions. Such a risk index complies with practitioners' expectations and requests for easy, useful, and valid instruments.

Studio Mathematics: The Epistemology and Practice of Design Pedagogy as a Model for Mathematics Learning. WCER Working Paper No. 2005-3

ERIC Educational Resources Information Center

Shaffer, David Williamson

2005-01-01

This paper examines how middle school students developed understanding of transformational geometry through design activities in Escher's World, a computationally rich design experiment explicitly modeled on an architectural design studio. Escher's World was based on the theory of pedagogical praxis (Shaffer, 2004a), which suggests that preserving…

Phase-Division-Based Dynamic Optimization of Linkages for Drawing Servo Presses

NASA Astrophysics Data System (ADS)

Zhang, Zhi-Gang; Wang, Li-Ping; Cao, Yan-Ke

2017-11-01

Existing linkage-optimization methods are designed for mechanical presses; few can be directly used for servo presses, so development of the servo press is limited. Based on the complementarity of linkage optimization and motion planning, a phase-division-based linkage-optimization model for a drawing servo press is established. Considering the motion-planning principles of a drawing servo press, and taking account of work rating and efficiency, the constraints of the optimization model are constructed. Linkage is optimized in two modes: use of either constant eccentric speed or constant slide speed in the work segments. The performances of optimized linkages are compared with those of a mature linkage SL4-2000A, which is optimized by a traditional method. The results show that the work rating of a drawing servo press equipped with linkages optimized by this new method improved and the root-mean-square torque of the servo motors is reduced by more than 10%. This research provides a promising method for designing energy-saving drawing servo presses with high work ratings.

Investigation of model-based physical design restrictions (Invited Paper)

NASA Astrophysics Data System (ADS)

Lucas, Kevin; Baron, Stanislas; Belledent, Jerome; Boone, Robert; Borjon, Amandine; Couderc, Christophe; Patterson, Kyle; Riviere-Cazaux, Lionel; Rody, Yves; Sundermann, Frank; Toublan, Olivier; Trouiller, Yorick; Urbani, Jean-Christophe; Wimmer, Karl

2005-05-01

As lithography and other patterning processes become more complex and more non-linear with each generation, the task of physical design rules necessarily increases in complexity also. The goal of the physical design rules is to define the boundary between the physical layout structures which will yield well from those which will not. This is essentially a rule-based pre-silicon guarantee of layout correctness. However the rapid increase in design rule requirement complexity has created logistical problems for both the design and process functions. Therefore, similar to the semiconductor industry's transition from rule-based to model-based optical proximity correction (OPC) due to increased patterning complexity, opportunities for improving physical design restrictions by implementing model-based physical design methods are evident. In this paper we analyze the possible need and applications for model-based physical design restrictions (MBPDR). We first analyze the traditional design rule evolution, development and usage methodologies for semiconductor manufacturers. Next we discuss examples of specific design rule challenges requiring new solution methods in the patterning regime of low K1 lithography and highly complex RET. We then evaluate possible working strategies for MBPDR in the process development and product design flows, including examples of recent model-based pre-silicon verification techniques. Finally we summarize with a proposed flow and key considerations for MBPDR implementation.

The Physics Analysis of a Gas Attenuator with Argon as a Working Gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryutov,, D.D.

2010-12-07

A gas attenuator is an important element of the LCLS facility. The attenuator must operate in a broad range of x-ray energies, provide attenuation coefficient between 1 and 10{sup 4} with the accuracy of 1% and, at the same time, be reliable and allow for many months of un-interrupted operation. S. Shen has recently carried out a detailed design study of the attenuator based on the use of nitrogen as a working gas. In this note we assess the features of the attenuator based on the use of argon. We concentrate on the physics issues, not the design features.

Design & implementation of distributed spatial computing node based on WPS

NASA Astrophysics Data System (ADS)

Liu, Liping; Li, Guoqing; Xie, Jibo

2014-03-01

Currently, the research work of SIG (Spatial Information Grid) technology mostly emphasizes on the spatial data sharing in grid environment, while the importance of spatial computing resources is ignored. In order to implement the sharing and cooperation of spatial computing resources in grid environment, this paper does a systematical research of the key technologies to construct Spatial Computing Node based on the WPS (Web Processing Service) specification by OGC (Open Geospatial Consortium). And a framework of Spatial Computing Node is designed according to the features of spatial computing resources. Finally, a prototype of Spatial Computing Node is implemented and the relevant verification work under the environment is completed.

Modeling workflow to design machine translation applications for public health practice

PubMed Central

Turner, Anne M.; Brownstein, Megumu K.; Cole, Kate; Karasz, Hilary; Kirchhoff, Katrin

2014-01-01

Objective Provide a detailed understanding of the information workflow processes related to translating health promotion materials for limited English proficiency individuals in order to inform the design of context-driven machine translation (MT) tools for public health (PH). Materials and Methods We applied a cognitive work analysis framework to investigate the translation information workflow processes of two large health departments in Washington State. Researchers conducted interviews, performed a task analysis, and validated results with PH professionals to model translation workflow and identify functional requirements for a translation system for PH. Results The study resulted in a detailed description of work related to translation of PH materials, an information workflow diagram, and a description of attitudes towards MT technology. We identified a number of themes that hold design implications for incorporating MT in PH translation practice. A PH translation tool prototype was designed based on these findings. Discussion This study underscores the importance of understanding the work context and information workflow for which systems will be designed. Based on themes and translation information workflow processes, we identified key design guidelines for incorporating MT into PH translation work. Primary amongst these is that MT should be followed by human review for translations to be of high quality and for the technology to be adopted into practice. Counclusion The time and costs of creating multilingual health promotion materials are barriers to translation. PH personnel were interested in MT's potential to improve access to low-cost translated PH materials, but expressed concerns about ensuring quality. We outline design considerations and a potential machine translation tool to best fit MT systems into PH practice. PMID:25445922

Examining the Impact of Adaptively Faded Worked Examples on Student Learning Outcomes

ERIC Educational Resources Information Center

Flores, Raymond; Inan, Fethi

2014-01-01

The purpose of this study was to explore effective ways to design guided practices within a web-based mathematics problem solving tutorial. Specifically, this study examined student learning outcome differences between two support designs (e.g. adaptively faded and fixed). In the adaptively faded design, students were presented with problems in…

Distributed Group Design Process: Lessons Learned.

ERIC Educational Resources Information Center

Eseryel, Deniz; Ganesan, Radha

A typical Web-based training development team consists of a project manager, an instructional designer, a subject-matter expert, a graphic artist, and a Web programmer. The typical scenario involves team members working together in the same setting during the entire design and development process. What happens when the team is distributed, that is…

Optimal Parameter Design of Coarse Alignment for Fiber Optic Gyro Inertial Navigation System.

PubMed

Lu, Baofeng; Wang, Qiuying; Yu, Chunmei; Gao, Wei

2015-06-25

Two different coarse alignment algorithms for Fiber Optic Gyro (FOG) Inertial Navigation System (INS) based on inertial reference frame are discussed in this paper. Both of them are based on gravity vector integration, therefore, the performance of these algorithms is determined by integration time. In previous works, integration time is selected by experience. In order to give a criterion for the selection process, and make the selection of the integration time more accurate, optimal parameter design of these algorithms for FOG INS is performed in this paper. The design process is accomplished based on the analysis of the error characteristics of these two coarse alignment algorithms. Moreover, this analysis and optimal parameter design allow us to make an adequate selection of the most accurate algorithm for FOG INS according to the actual operational conditions. The analysis and simulation results show that the parameter provided by this work is the optimal value, and indicate that in different operational conditions, the coarse alignment algorithms adopted for FOG INS are different in order to achieve better performance. Lastly, the experiment results validate the effectiveness of the proposed algorithm.

Tilt performance of the ground settlement sensor configured in a fiber-optic low-coherent interferometer.

PubMed

Zhang, Pinglei; Wei, Heming; Guo, Jingjing; Sun, Changsen

2016-10-01

Ground settlement (GS) is one of the causes that destroy the durability of reinforced concrete structures. It could lead to a deterioration in the structural basement and increase the risk of collapse. The methods used for GS monitoring were mostly electronic-based sensors for reading the changes in resistance, resonant frequencies, etc. These sensors often bear low accuracy in the long term. Our published work demonstrated that a fiber-optic low-coherent interferometer configured in a Michelson interferometer was designed as a GS sensor, and a micro-meter resolution in the room environment was approached. However, the designed GS sensor, which in principle is based on a hydraulic connecting vessel, has to suffer from a tilt degeneration problem due to a strictly vertical requirement in practical installment. Here, we made a design for the GS sensor based on its robust tilt performance. The experimental tests show that the sensor can work well within a ±5° tilt. This could meet the requirements in most designed GS sensor installment applications.

Impact of an inquiry unit on grade 4 students' science learning

NASA Astrophysics Data System (ADS)

Di Mauro, María Florencia; Furman, Melina

2016-09-01

This paper concerns the identification of teaching strategies that enhance the development of 4th grade students' experimental design skills at a public primary school in Argentina. Students' performance in the design of relevant experiments was evaluated before and after an eight-week intervention compared to a control group, as well as the persistence of this learning after eight months. The study involved a quasi-experimental longitudinal study with pre-test/post-test/delayed post-test measures, complemented with semi-structured interviews with randomly selected students. Our findings showed improvement in the experimental design skills as well as its sustainability among students working with the inquiry-based sequence. After the intervention, students were able to establish valid comparisons, propose pertinent designs and identify variables that should remain constant. Contrarily, students in the control group showed no improvement and continued to solve the posed problems based on prior beliefs. In summary, this paper shows evidence that implementing inquiry-based units involving problems set in cross-domain everyday situations that combine independent student work with teacher guidance significantly improves the development of scientific skills in real classroom contexts.

Experimental validation of ultra-thin metalenses for N-beam emissions based on transformation optics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Kuang, E-mail: zhangkuang@hit.edu.cn; State Key Laboratory of Millimeter Waves, Nanjing 210096; Ding, Xumin

2016-02-01

A general design of metalenses for N-beam emissions is proposed based on transformation optics. A linear mapping function is adopted to achieve the homogeneous characterization of the transforming medium, which is therefore easy to be achieved compared with previous designs limited by inhomogeneity based on transformation optics. To verify the theoretical design, a four-beam antenna constructed with ultrathin, homogenous, and uniaxial anisotropic metalens is designed, fabricated, and measured. It is shown that the realized gain of the four-beam antenna is increased by 6 dB compared with the single dipole source, while working frequency and relative bandwidth are kept unchanged. The measuredmore » far-field pattern verifies theoretical design procedure.« less

Design Your Own Budget: A Case Study Based on the 1988 Budget.

ERIC Educational Resources Information Center

Williams, Paul

1992-01-01

Presents a classroom activity in which students work in groups to develop a national budget. Requires students to consider economic factors such as inflation, unemployment, and taxation. Includes charts and a national budget work sheet. (CFR)

Knowledge Interaction Design for Creative Knowledge Work

NASA Astrophysics Data System (ADS)

Nakakoji, Kumiyo; Yamamoto, Yasuhiro

This paper describes our approach for the development of application systems for creative knowledge work, particularly for early stages of information design tasks. Being a cognitive tool serving as a means of externalization, an application system affects how the user is engaged in the creative process through its visual interaction design. Knowledge interaction design described in this paper is a framework where a set of application systems for different information design domains are developed based on an interaction model, which is designed for a particular model of a thinking process. We have developed two sets of application systems using the knowledge interaction design framework: one includes systems for linear information design, such as writing, movie-editing, and video-analysis; the other includes systems for network information design, such as file-system navigation and hypertext authoring. Our experience shows that the resulting systems encourage users to follow a certain cognitive path through graceful user experience.

CDC MessageWorks: Designing and Validating a Social Marketing Tool to Craft and Defend Effective Messages.

PubMed

Cole, Galen E; Keller, Punam A; Reynolds, Jennifer; Schaur, Michelle; Krause, Diane

2016-03-01

The Centers for Disease Control and Prevention's Division of Cancer Prevention and Control, in partnership with Oak Ridge Associated Universities, designed an online social marketing strategy tool, MessageWorks, to help health communicators effectively formulate messages aimed at changing health behaviors and evaluate message tactics and audience characteristics. MessageWorks is based on the advisor for risk communication model that identifies 10 variables that can be used to predict target audience intentions to comply with health recommendations. This article discusses the value of the MessageWorks tool to health communicators and to the field of social marketing by (1) describing the scientific evidence supporting use of MessageWorks to improve health communication practice and (2) summarizing how to use MessageWorks and interpret the results it produces.

Investigation of Space Based Solid State Coherent Lidar

NASA Technical Reports Server (NTRS)

Amzajerdian, Farzin

2002-01-01

This report describes the work performed over the period of October 1, 1997 through March 31, 2001. Under this contract, UAH/CAO participated in defining and designing the SPAce Readiness Coherent Lidar Experiment (SPARCLE) mission, and developed the instrument's optical subsystem. This work was performed in collaborative fashion with NASA/MSFC engineers at both UAH/CAO and NASA/MSFC facilities. Earlier work by the UAH/CAO had produced a preliminary top-level system design for the Shuttle lidar instrument meeting the proposed mission performance requirements and the Space Shuttle Hitchhiker canister volume constraints. The UAH/CAO system design efforts had concentrated on the optical and mechanical designs of the instrument. The instrument electronics were also addressed, and the major electronic components and their interfaces defined. The instrument design concept was mainly based on the state of the transmitter and local oscillator laser development at NASA Langley Research Center and Jet Propulsion Laboratory, and utilized several lidar-related technologies that were either developed or evaluated by the NASA/MSFC and UAH/CAO scientists. UAH/CAO has developed a comprehensive coherent lidar numerical model capable of analyzing the performance of different instrument and mission concepts. This model uses the instrument configuration, atmospheric conditions and current velocity estimation theory to provide prediction of instrument performance during different phases of operation. This model can also optimize the design parameters of the instrument.

Design Principles for Nickel/Hydrogen Cells and Batteries

NASA Technical Reports Server (NTRS)

Thaller, Lawrence H.; Manzo, Michelle A.; Gonzalez-Sanabria, Olga D.

1987-01-01

Individual-pressure-vessel (IPV) nickel/hydrogen cells and bipolar batteries developed for use as energy-storage subsystems for satelite applications. Design principles applied draw upon extensive background in separator technology, alkaline-fuel-cell technology and several alkaline-cell technology areas. Principals are rather straightforward applications of capillary-force formalisms, coupled with slowly developing data base resulting from careful post-test analyses. Based on preconceived assumptions relative to how devices work and how to be designed so they display longer cycle lives at deep discharge.

Design and Implementation of 3D Model Data Management System Based on SQL

NASA Astrophysics Data System (ADS)

Li, Shitao; Zhang, Shixin; Zhang, Zhanling; Li, Shiming; Jia, Kun; Hu, Zhongxu; Ping, Liang; Hu, Youming; Li, Yanlei

CAD/CAM technology plays an increasingly important role in the machinery manufacturing industry. As an important means of production, the accumulated three-dimensional models in many years of design work are valuable. Thus the management of these three-dimensional models is of great significance. This paper gives detailed explanation for a method to design three-dimensional model databases based on SQL and to implement the functions such as insertion, modification, inquiry, preview and so on.

Linear-hall sensor based force detecting unit for lower limb exoskeleton

NASA Astrophysics Data System (ADS)

Li, Hongwu; Zhu, Yanhe; Zhao, Jie; Wang, Tianshuo; Zhang, Zongwei

2018-04-01

This paper describes a knee-joint human-machine interaction force sensor for lower-limb force-assistance exoskeleton. The structure is designed based on hall sensor and series elastic actuator (SEA) structure. The work we have done includes the structure design, the parameter determination and dynamic simulation. By converting the force signal into macro displacement and output voltage, we completed the measurement of man-machine interaction force. And it is proved by experiments that the design is simple, stable and low-cost.

Design of a prosumer EMS for energy trading

NASA Astrophysics Data System (ADS)

Hwang, T.; Yoo, Y.; Kang, S.; Lee, I.

2018-03-01

We design a DER management system for energy trading based on OASIS EI and EMIX. With the spread of DERs, there is a growing need of a system for integrated management of DERs and customer loads. In this paper, we give a brief overview of a DER EMS for prosumer energy saving and trading. Based on the OASIS standards, we design a functional architecture of a DER EMS for energy trading. After showing communication protocols and operation sequences, we summarize our works.

CD volume design and verification

NASA Technical Reports Server (NTRS)

Li, Y. P.; Hughes, J. S.

1993-01-01

In this paper, we describe a prototype for CD-ROM volume design and verification. This prototype allows users to create their own model of CD volumes by modifying a prototypical model. Rule-based verification of the test volumes can then be performed later on against the volume definition. This working prototype has proven the concept of model-driven rule-based design and verification for large quantity of data. The model defined for the CD-ROM volumes becomes a data model as well as an executable specification.

The challenges of a home-based nursing consultation business.

PubMed

Schulmeister, L

1999-03-01

The transition from working in a traditional setting to working at home alone can be challenging for new nurse consultants. Home-based consultants can use a variety of strategies to stay focused and connected, such as having a designated work area, limiting distractions, and networking. Nurse consultants can obtain information about business management from community resources, and computer on-line services offer a means of contacting other small-business owners. Ongoing business evaluations, which include professional accomplishments as well as an examination of income and expenses, help in planning. Home-based nurse consultants can increase the likelihood of business success by setting objectives, working diligently, and networking with others in the business community.

Fuel saver based on electromagnetic induction for automotive engine

NASA Astrophysics Data System (ADS)

Siregar, Houtman P.; Sibarani, Maradu

2007-12-01

In the considered research is designed and analyzed the performance of the fuel saver which is based on electromagnetic induction for automotive diesel engine. The fuel saver which is based on permanent magnet has sold in market and its performance has tested. In comparison to the former fuel saver, in the proposed work is produced fuel saver which is based on electromagnetic induction. The considered research is the continuation of my former work. Performance of the produced fuel saver which is installed in the fuel line of internal combustion engine rig is compared to the performance of the standard internal combustion engine rig Speed of the engine, wire diameter of coil, and number of coil which is coiled in the winding of the the fuel saver are chosen as the testing variables. The considered research has succeeded to design the fuel saver which is based on electromagnetic induction for saving the automotive fuel consumption. Results of the research show that the addition of the fuel saver which is based on electromagnetic induction to the flow of the diesel fuel can significantly save the automative fuel consumption. In addition the designed fuel saver can reduce the opacity of the emission gas.

EPSE Project 2: Designing and Evaluating Short Teaching Sequences, Informed by Research Evidence.

ERIC Educational Resources Information Center

Leach, John; Hind, Andy; Lewis, Jenny; Scott, Phil

2002-01-01

Reports on Project 2 from the Evidence-based Practice in Science Education (EPSE) Research Network. In this project, teachers and researchers worked collaboratively on the design of three short teaching sequences on electric circuits. (DDR)

Bitter-type magnet plate design with compound conductor of ultrahigh mechanical strength

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haubenberger, W.D.

1981-01-01

A Bitter-type magnet plate design based on a compound conductor of ultrahigh mechanical strength is described. An explosion-bonded and cold-worked copper-austenite compound is jointed by a special procedure with a soft compound sheet.

Introduction to Building Systems Performance: Houses that Work II. Revised February 2005

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2005-03-01

The Building Science Consortium (BSC) design recommendations are based on the hygrothermal regions with reference to the annual rainfall. Local climate must be addressed if it differs significantly from the climate described for a particular design.

Foundational Performance Analyses of Pressure Gain Combustion Thermodynamic Benefits for Gas Turbines

NASA Technical Reports Server (NTRS)

Paxson, Daniel E.; Kaemming, Thomas A.

2012-01-01

A methodology is described whereby the work extracted by a turbine exposed to the fundamentally nonuniform flowfield from a representative pressure gain combustor (PGC) may be assessed. The method uses an idealized constant volume cycle, often referred to as an Atkinson or Humphrey cycle, to model the PGC. Output from this model is used as input to a scalable turbine efficiency function (i.e., a map), which in turn allows for the calculation of useful work throughout the cycle. Integration over the entire cycle yields mass-averaged work extraction. The unsteady turbine work extraction is compared to steady work extraction calculations based on various averaging techniques for characterizing the combustor exit pressure and temperature. It is found that averages associated with momentum flux (as opposed to entropy or kinetic energy) provide the best match. This result suggests that momentum-based averaging is the most appropriate figure-of-merit to use as a PGC performance metric. Using the mass-averaged work extraction methodology, it is also found that the design turbine pressure ratio for maximum work extraction is significantly higher than that for a turbine fed by a constant pressure combustor with similar inlet conditions and equivalence ratio. Limited results are presented whereby the constant volume cycle is replaced by output from a detonation-based PGC simulation. The results in terms of averaging techniques and design pressure ratio are similar.

Simulation of Blood flow in Artificial Heart Valve Design through Left heart

NASA Astrophysics Data System (ADS)

Hafizah Mokhtar, N.; Abas, Aizat

2018-05-01

In this work, an artificial heart valve is designed for use in real heart with further consideration on the effect of thrombosis, vorticity, and stress. The design of artificial heart valve model is constructed by Computer-aided design (CAD) modelling and simulated using Computational fluid dynamic (CFD) software. The effect of blood flow pattern, velocity and vorticity of the artificial heart valve design has been analysed in this research work. Based on the results, the artificial heart valve design shows that it has a Doppler velocity index that is less than the allowable standards for the left heart with values of more than 0.30 and less than 2.2. These values are safe to be used as replacement of the human heart valve.

Guiding science expeditions: The design of a learning environment for project-based science

NASA Astrophysics Data System (ADS)

Polman, Joseph Louis

Project-based pedagogy has been revived recently as a teaching strategy for promoting students' active engagement in learning science by doing science. Numerous reform efforts have encouraged project-based teaching in high schools, along with a range of supports for its implementation, often including computers and the Internet. History has shown, however, that academic research and new technologies are not enough to effect real change in classrooms. Ultimately, teachers accomplish activity with their students daily in classrooms. Putting the idea of project-based teaching into practice depends on many particulars of teachers' situated work with students. To better understand the complexity of project-based science teaching in schools, I conducted an interpretive case study of one exceptional teacher's work. The teacher devotes all class time after the beginning of the year to open-ended, student-designed Earth Science research projects. Over four years of involvement with the Learning through Collaborative Visualization (CoVis) reform effort, this teacher has developed, implemented, and refined strategies for supporting and guiding students in conducting open-ended inquiry. Through a close examination of the teacher's work supporting student projects, I explore the design issues involved in such an endeavor, including affordances, constraints, and tradeoffs. In particular, I show how time constrains both student and teacher action, how the traditional school culture and grading create stumbling blocks for change, and how conflicting beliefs about teaching and learning undermine the accomplishment of guided inquiry. I also show how Internet tools including Usenet news, email, and the World Wide Web afford students an opportunity to gather and make use of distributed expertise and scientific data resources; how an activity structure, combined with a corresponding structure to the artifact of the final written product, supports student accomplishment of unfamiliar practices; and how the teacher guides students in real time through mutually transformative communication. I synthesize the important design elements into a framework for conducting project-based science, especially in settings where such pedagogy is relatively new. This study will inform teachers and reformers of the practical and complex work of implementing project-based teaching in schools.

Methodology for cloud-based design of robots

NASA Astrophysics Data System (ADS)

Ogorodnikova, O. M.; Vaganov, K. A.; Putimtsev, I. D.

2017-09-01

This paper presents some important results for cloud-based designing a robot arm by a group of students. Methodology for the cloud-based design was developed and used to initiate interdisciplinary project about research and development of a specific manipulator. The whole project data files were hosted by Ural Federal University data center. The 3D (three-dimensional) model of the robot arm was created using Siemens PLM software (Product Lifecycle Management) and structured as a complex mechatronics product by means of Siemens Teamcenter thin client; all processes were performed in the clouds. The robot arm was designed in purpose to load blanks up to 1 kg into the work space of the milling machine for performing student's researches.

Analyzing Reliability and Performance Trade-Offs of HLS-Based Designs in SRAM-Based FPGAs Under Soft Errors

NASA Astrophysics Data System (ADS)

Tambara, Lucas Antunes; Tonfat, Jorge; Santos, André; Kastensmidt, Fernanda Lima; Medina, Nilberto H.; Added, Nemitala; Aguiar, Vitor A. P.; Aguirre, Fernando; Silveira, Marcilei A. G.

2017-02-01

The increasing system complexity of FPGA-based hardware designs and shortening of time-to-market have motivated the adoption of new designing methodologies focused on addressing the current need for high-performance circuits. High-Level Synthesis (HLS) tools can generate Register Transfer Level (RTL) designs from high-level software programming languages. These tools have evolved significantly in recent years, providing optimized RTL designs, which can serve the needs of safety-critical applications that require both high performance and high reliability levels. However, a reliability evaluation of HLS-based designs under soft errors has not yet been presented. In this work, the trade-offs of different HLS-based designs in terms of reliability, resource utilization, and performance are investigated by analyzing their behavior under soft errors and comparing them to a standard processor-based implementation in an SRAM-based FPGA. Results obtained from fault injection campaigns and radiation experiments show that it is possible to increase the performance of a processor-based system up to 5,000 times by changing its architecture with a small impact in the cross section (increasing up to 8 times), and still increasing the Mean Workload Between Failures (MWBF) of the system.

Design, construction, and testing of a five active axes magnetic bearing system

NASA Technical Reports Server (NTRS)

Delprete, Cristiana; Genta, Giancarlo; Carabelli, Stefano

1994-01-01

A high speed electric spindle based on active electromagnetic suspension technology has been designed, built, and tested. The main goal of the research work was the construction of a highly modular unit which can be used for teaching and research purposes. The design of the electromechanical components and of the control unit is described in detail, together with the characterization tests performed on the various subsystems. A description of the preliminary tests on the unit, conducted at speeds not in excess of the first deformation critical speed of the rotor, concludes the work.

Design options for improved performance with high-density carbon ablators and low-gas fill hohlraum targets

NASA Astrophysics Data System (ADS)

Berzak Hopkins, L.; Divol, L.; Lepape, S.; Meezan, N. B.; Dewald, E.; Ho, D.; Khan, S.; Pak, A.; Ralph, J.; Ross, J. S.

2016-10-01

Recent simulation-based and experimental work using high-density carbon ablators in unlined uranium hohlraums with 0.3 mg/cc helium fill have demonstrated round implosions with minimal evolution of Legendre moment P2 during burn. To extend this promising work, design studies have been performed to explore potential performance improvements with larger capsules, while maintaining similar case-to-capsule target ratios. We present here the results of these design studies, which will motivate a series of upcoming experiments at the National Ignition Facility. Prepared by LLNL under Contract DE-AC52-07NA27344.

Research in the Real World: Improving Adult Learners Web Search and Evaluation Skills through Motivational Design and Problem-Based Learning

ERIC Educational Resources Information Center

Roberts, Lindsay

2017-01-01

How can we better engage adult learners during information literacy sessions? How do we increase students' perception of the relevance and importance of information literacy skills for academic work and life in the real world? To explore these questions, the ARCS Model of Motivational Design and Problem-Based Learning were used to develop…

Rethinking the NTCIP Design and Protocols - Analyzing the Issues

DOT National Transportation Integrated Search

1998-03-03

This working paper discusses the issues involved in changing the current draft NTCIP standard from an X.25-based protocol stack to an Internet-based protocol stack. It contains a methodology which could be used to change NTCIP's base protocols. This ...

Assessing Whether Students Seek Constructive Criticism: The Design of an Automated Feedback System for a Graphic Design Task

ERIC Educational Resources Information Center

Cutumisu, Maria; Blair, Kristen P.; Chin, Doris B.; Schwartz, Daniel L.

2017-01-01

We introduce a choice-based assessment strategy that measures students' choices to seek constructive feedback and to revise their work. We present the feedback system of a game we designed to assess whether students choose positive or negative feedback and choose to revise their posters in the context of a poster design task, where they learn…

Model Development and Model-Based Control Design for High Performance Nonlinear Smart Systems

DTIC Science & Technology

2007-11-20

potentially impact a broad range of flow control problems of interest to the Air Force and Boeing. Point of contact: James Mabe , Boeing Phantom Works...rotorcraft blades. In both cases, models and control designs will be validated using data from Boeing experiments and flight tests. Point of contact: James ... Mabe , Boeing Phantom Works, Seattle, WA, 206-655-0091. 3. PZT Unimorphs – Boeing: Nonlinear structural models developed through AFOSR support are being

The design of scenario-based training from the resilience engineering perspective: a study with grid electricians.

PubMed

Saurin, Tarcisio Abreu; Wachs, Priscila; Righi, Angela Weber; Henriqson, Eder

2014-07-01

Although scenario-based training (SBT) can be an effective means to help workers develop resilience skills, it has not yet been analyzed from the resilience engineering (RE) perspective. This study introduces a five-stage method for designing SBT from the RE view: (a) identification of resilience skills, work constraints and actions for re-designing the socio-technical system; (b) design of template scenarios, allowing the simulation of the work constraints and the use of resilience skills; (c) design of the simulation protocol, which includes briefing, simulation and debriefing; (d) implementation of both scenarios and simulation protocol; and (e) evaluation of the scenarios and simulation protocol. It is reported how the method was applied in an electricity distribution company, in order to train grid electricians. The study was framed as an application of design science research, and five research outputs are discussed: method, constructs, model of the relationships among constructs, instantiations of the method, and theory building. Concerning the last output, the operationalization of the RE perspective on three elements of SBT is presented: identification of training objectives; scenario design; and debriefing. Copyright © 2013 Elsevier Ltd. All rights reserved.

Design and experiment of spectrometer based on scanning micro-grating integrating with angle sensor

NASA Astrophysics Data System (ADS)

Biao, Luo; Wen, Zhi-yu

2014-01-01

A compact, low cost, high speed, non-destructive testing NIR (near infrared) spectrometer optical system based on MOEMS grating device is developed. The MOEMS grating works as the prismatic element and wavelength scanning element in our optical system. The MOEMS grating enables the design of compact grating spectrometers capable of acquiring full spectra using a single detector element. This MOEMS grating is driven by electromagnetic force and integrated with angle sensor which used to monitored deflection angle while the grating working. Comparing with the traditional spectral system, there is a new structure with a single detector and worked at high frequency. With the characteristics of MOEMS grating, the structure of the spectrometer system is proposed. After calculating the parameters of the optical path, ZEMAX optical software is used to simulate the system. According the ZEMAX output file of the 3D model, the prototype is designed by SolidWorks rapidly, fabricated. Designed for a wavelength range between 800 nm and 1500 nm, the spectrometer optical system features a spectral resolution of 16 nm with the volume of 97 mm × 81.7 mm × 81 mm. For the purpose of reduce modulated effect of sinusoidal rotation, spectral intensity of the different wavelength should be compensated by software method in the further. The system satisfies the demand of NIR micro-spectrometer with a single detector.

The Meaning of Working among Professional Employees in Germany, Poland and Russia

ERIC Educational Resources Information Center

Kuchinke, K. Peter; Ardichvili, Alexandre; Borchert, Margret; Rozanski, Andrzej

2009-01-01

Purpose: The purpose of this paper is to report the results of an empirical study of the meaning of working, individual level work outcomes, and job and career satisfaction, among professional level employees in business organizations in Russia, Poland, and Germany. Design/methodology/approach: The theoretical framework for the study was based on…

Modeling the Performance of MEMS Based Directional Microphones

DTIC Science & Technology

2008-12-01

5 B. KARUNASIRI’S BIOMIMICRY WORK ................................................ 8... biomimicry efforts involving the fly’s ear. To show the motivation behind the design of an acoustics MEMS device, it includes a brief description of the...system (From: Miles et al., 1995) B. KARUNASIRI’S BIOMIMICRY WORK Two NPS thesis students working under the mentorship of Professor Gamani Karunasiri

Sociotechnical attributes of safe and unsafe work systems

PubMed Central

Kleiner, Brian M.; Hettinger, Lawrence J.; DeJoy, David M.; Huang, Yuang-Hsiang; Love, Peter E.D.

2015-01-01

Theoretical and practical approaches to safety based on sociotechnical systems principles place heavy emphasis on the intersections between social–organisational and technical–work process factors. Within this perspective, work system design emphasises factors such as the joint optimisation of social and technical processes, a focus on reliable human–system performance and safety metrics as design and analysis criteria, the maintenance of a realistic and consistent set of safety objectives and policies, and regular access to the expertise and input of workers. We discuss three current approaches to the analysis and design of complex sociotechnical systems: human–systems integration, macroergonomics and safety climate. Each approach emphasises key sociotechnical systems themes, and each prescribes a more holistic perspective on work systems than do traditional theories and methods. We contrast these perspectives with historical precedents such as system safety and traditional human factors and ergonomics, and describe potential future directions for their application in research and practice. Practitioner Summary: The identification of factors that can reliably distinguish between safe and unsafe work systems is an important concern for ergonomists and other safety professionals. This paper presents a variety of sociotechnical systems perspectives on intersections between social–organisational and technology–work process factors as they impact work system analysis, design and operation. PMID:25909756

Case-based synthesis in automatic advertising creation system

NASA Astrophysics Data System (ADS)

Zhuang, Yueting; Pan, Yunhe

1995-08-01

Advertising (ads) is an important design area. Though many interactive ad-design softwares have come into commercial use, none of them ever support the intelligent work -- automatic ad creation. The potential for this is enormous. This paper gives a description of our current work in research of an automatic advertising creation system (AACS). After careful analysis of the mental behavior of a human ad designer, we conclude that case-based approach is appropriate to its intelligent modeling. A model for AACS is given in the paper. A case in ads is described as two parts: the creation process and the configuration of the ads picture, with detailed data structures given in the paper. Along with the case representation, we put forward an algorithm. Some issues such as similarity measure computing, and case adaptation have also been discussed.

High-Order Dielectric Metasurfaces for High-Efficiency Polarization Beam Splitters and Optical Vortex Generators

NASA Astrophysics Data System (ADS)

Guo, Zhongyi; Zhu, Lie; Guo, Kai; Shen, Fei; Yin, Zhiping

2017-08-01

In this paper, a high-order dielectric metasurface based on silicon nanobrick array is proposed and investigated. By controlling the length and width of the nanobricks, the metasurfaces could supply two different incremental transmission phases for the X-linear-polarized (XLP) and Y-linear-polarized (YLP) light with extremely high efficiency over 88%. Based on the designed metasurface, two polarization beam splitters working in high-order diffraction modes have been designed successfully, which demonstrated a high transmitted efficiency. In addition, we have also designed two vortex-beam generators working in high-order diffraction modes to create vortex beams with the topological charges of 2 and 3. The employment of dielectric metasurfaces operating in high-order diffraction modes could pave the way for a variety of new ultra-efficient optical devices.

A Quartz Crystal Microbalance dew point sensor without frequency measurement.

PubMed

Wang, Guohua; Zhang, Weishuo; Wang, Shuo; Sun, Jinglin

2014-11-01

This work deals with the design of a dew point sensor based on Quartz Crystal Microbalance (QCM) without measuring the frequency. This idea is inspired by the fact that the Colpitts oscillation circuit will stop oscillating when the QCM works in the liquid media. The quartz crystal and the electrode are designed through the finite element simulation and the stop oscillating experiment is conducted to verify the sensibility. Moreover, the measurement result is calibrated to approach the true value. At last a series of dew points at the same temperature is measured with the designed sensor. Results show that the designed dew point sensor is able to detect the dew point with the proper accuracy.

Design Study for a Free-piston Vuilleumier Cycle Heat Pump

NASA Astrophysics Data System (ADS)

Matsue, Junji; Hoshino, Norimasa; Ikumi, Yonezou; Shirai, Hiroyuki

Conceptual design for a free-piston Vuilleumier cycle heat pump machine was proposed. The machine was designed based upon the numerical results of a dynamic analysis method. The method included the effect of self excitation vibration with dissipation caused by the flow friction of an oscillating working gas flow and solid friction of seals. It was found that the design values of reciprocating masses and spring constants proposed in published papers related to this study were suitable for practical use. The fundamental effects of heat exchanger elements on dynamic behaviors of the machine were clarified. It has been pointed out that some improvements were required for thermodynamic analysis of heat exchangers and working spaces.

A quartz crystal microbalance dew point sensor without frequency measurement

NASA Astrophysics Data System (ADS)

Wang, Guohua; Zhang, Weishuo; Wang, Shuo; Sun, Jinglin

2014-11-01

This work deals with the design of a dew point sensor based on Quartz Crystal Microbalance (QCM) without measuring the frequency. This idea is inspired by the fact that the Colpitts oscillation circuit will stop oscillating when the QCM works in the liquid media. The quartz crystal and the electrode are designed through the finite element simulation and the stop oscillating experiment is conducted to verify the sensibility. Moreover, the measurement result is calibrated to approach the true value. At last a series of dew points at the same temperature is measured with the designed sensor. Results show that the designed dew point sensor is able to detect the dew point with the proper accuracy.

Multi-frequency metasurface carpet cloaks.

PubMed

Wang, Chan; Yang, Yihao; Liu, Qianghu; Liang, Dachuan; Zheng, Bin; Chen, Hongsheng; Xu, Zhiwei; Wang, Huaping

2018-05-28

Metasurfaces provide an alternative way to design three-dimensional arbitrary-shaped carpet cloaks with ultrathin thicknesses. Nevertheless, the previous metasurface carpet cloaks work only at a single frequency. To overcome this challenge, we here propose a macroscopic metasurface carpet cloak. The cloak is designed with a metasurface of a few layers that exhibit a special spatial distribution of the conductance and inductance in the unit cell; therefore, it can fully control the reflection phases at several independent frequencies simultaneously. Because of this, the present metasurface cloak can work at dual frequencies based on multi-resonance principle. The proposed design methodology will be very useful in future broadband macroscopic cloaks design with low profiles, light weights, and easy access.

Design of a dual band metamaterial absorber for Wi-Fi bands

NASA Astrophysics Data System (ADS)

Alkurt, Fatih Özkan; Baǧmancı, Mehmet; Karaaslan, Muharrem; Bakır, Mehmet; Altıntaş, Olcay; Karadaǧ, Faruk; Akgöl, Oǧuzhan; Ünal, Emin

2018-02-01

The goal of this work is to design and fabrication of a dual band metamaterial based absorber for Wireless Fidelity (Wi-Fi) bands. Wi-Fi has two different operating frequencies such as 2.45 GHz and 5 GHz. A dual band absorber is proposed and the proposed structure consists of two layered unit cells, and different sized square split ring (SSR) resonators located on each layers. Copper is used for metal layer and resonator structure, FR-4 is used as substrate layer in the proposed structure. This designed dual band metamaterial absorber is used in the wireless frequency bands which has two center frequencies such as 2.45 GHz and 5 GHz. Finite Integration Technique (FIT) based simulation software used and according to FIT based simulation results, the absorption peak in the 2.45 GHz is about 90% and the another frequency 5 GHz has absorption peak near 99%. In addition, this proposed structure has a potential for energy harvesting applications in future works.

Supporting Faculty in the Design and Structuring of Web-Based Courses.

ERIC Educational Resources Information Center

Freeman, H.; Ryan, S.; Boys, J.

This paper reports on the development and extension of a concept mapping tool into a complete online course design support framework for academics: CEDOT (Course Elicitation, Development and Output Tool). The tool provides a course design framework that faculty work through in an order of their choosing. It gives context specific help and advice…

Aerostructural interaction in a collaborative MDO environment

NASA Astrophysics Data System (ADS)

Ciampa, Pier Davide; Nagel, Björn

2014-10-01

The work presents an approach for aircraft design and optimization, developed to account for fluid-structure interactions in MDO applications. The approach makes use of a collaborative distributed design environment, and focuses on the influence of multiple physics based aerostructural models, on the overall aircraft synthesis and optimization. The approach is tested for the design of large transportation aircraft.

Learning to Think Spatially in an Undergraduate Interdisciplinary Computational Design Context: A Case Study

ERIC Educational Resources Information Center

Ben Youssef, Belgacem; Berry, Barbara

2012-01-01

Spatial thinking skills are vital for success in everyday living and work, not to mention the centrality of spatial reasoning in scientific discoveries, design-based disciplines, medicine, geosciences and mathematics to name a few. This case study describes a course in spatial thinking and communicating designed and delivered by an…

A Learning Design Ontology Based on the IMS Specification

ERIC Educational Resources Information Center

Amorim, Ricardo R.; Lama, Manuel; Sanchez, Eduardo; Riera, Adolfo; Vila, Xose A.

2006-01-01

In this paper, we present an ontology to represent the semantics of the IMS Learning Design (IMS LD) specification, a meta-language used to describe the main elements of the learning design process. The motivation of this work relies on the expressiveness limitations found on the current XML-Schema implementation of the IMS LD conceptual model. To…

Developing a Learning Object Metadata Application Profile Based on LOM Suitable for the Australian Higher Education Context

ERIC Educational Resources Information Center

Agostinho, Shirley; Bennett, Sue; Lockyer, Lori; Harper, Barry

2004-01-01

This paper reports recent work in developing of structures and processes that support university teachers and instructional designers incorporating learning objects into higher education focused learning designs. The aim of the project is to develop a framework to guide the design and implementation of high quality learning experiences. This…

Task Relevance in the Design of Online Professional Development for Teachers of ELLs: A Q Methodology Study

ERIC Educational Resources Information Center

Collins, Linda J.; Liang, Xin

2014-01-01

Online professional development (oPD) for teachers should focus on designing web-based learning opportunities that help practicing educators solve the tough problems of practice when working in their schools. Technology, pedagogy, and content knowledge can be integrated in the design of online professional development modules to enhance task…

Anthropometric assessment of crane cabins and recommendations for design: A case study.

PubMed

Zunjic, Aleksandar; Brkic, Vesna Spasojevic; Klarin, Milivoj; Brkic, Aleksandar; Krstic, Dragan

2015-01-01

Work of crane operators is very difficult and demanding. Therefore, it is very important that the cabin of a crane be designed on the basis of relevant anthropometric data. However, it is very difficult to find a research that considers anthropometric convenience of crane cabins. From the theoretical viewpoint, it is important to perceive and to classify effects of the anthropometric incompatibility of crane cabins. Globally, the objective is to consider the anthropometric convenience of existing crane cabins, and possibilities for improvements of their design from the ergonomic point of view. In this regard, it is significant to detect constraints that impede or hinder the work of the crane operators, which could be overcome with certain anthropometric solutions. The main objective is to examine whether and to what extent is justifiable to use anthropometric data that are obtained on the basis of general (national) population, during designing the crane cabins. For the assessment of existing crane cabins and the work of operators, four methods were used: observation of the work of the operators and design solutions of the cabins, the checklist approach, interviewing of operators and the experimental research based on obtaining the data on the population of crane operators. Results of the analysis based on the method of observation, analysis based on the application of the checklist, as well as interviewing of the operators indicate that certain construction constraints of the components in the cabins are the main reasons of reduced visibility and improper working postures of operators. All this has caused the emergence of continuous musculoskeletal loading of the crane operators. The results of the anthropometric research that were obtained on the population of crane operators in this case study suggest that there is a statistically significant difference, when compared data of this population of workers with anthropometric data from the general population. Analyzed workplaces in crane cabins do not correspond to the majority of operators from the anthropometric standpoint. The conducted anthropometric analysis has been indicated that could be made the mistake, if dimensions of the cabin and layout of equipment would be relied on data derived from the general population of citizens. In order to achieve greater precision in the design and configuration of equipment, it is recommended using the data that are obtained directly on the population of the crane operators when designing the cabin.

A Case Study of a High School Fab Lab

NASA Astrophysics Data System (ADS)

Lacy, Jennifer E.

This dissertation examines making and design-based STEM education in a formal makerspace. It focuses on how the design and implementation of a Fab Lab learning environment and curriculum affect how instructors and students see themselves engaging in science, and how the Fab Lab relates to the social sorting practices that already take place at North High School. While there is research examining design-based STEM education in informal and formal learning environments, we know little about how K-12 teachers define STEM in making activities when no university or museum partnership exists. This study sought to help fill this gap in the research literature. This case study of a formal makerspace followed instructors and students in one introductory Fab Lab course for one semester. Additional observations of an introductory woodworking course helped build the case and set it into the school context, and provided supplementary material to better understand the similarities and differences between the Fab Lab course and a more traditional design-based learning course. Using evidence from observational field notes, participant interviews, course materials, and student work, I found that the North Fab Lab relies on artifacts and rhetoric symbolic of science and STEM to set itself apart from other design-based courses at North High School. Secondly, the North Fab Lab instructors and students were unable to explain how what they were doing in the Fab Lab was science, and instead relied on vague and unsupported claims related to interdisciplinary STEM practices and dated descriptions of science. Lastly, the design and implementation of the Fab Lab learning environment and curriculum and its separation from North High School's low tech, design-based courses effectively reinforced social sorting practices and cultural assumptions about student work and intelligence.

Work process and task-based design of intelligent assistance systems in German textile industry

NASA Astrophysics Data System (ADS)

Löhrer, M.; Ziesen, N.; Altepost, A.; Saggiomo, M.; Gloy, Y. S.

2017-10-01

The mid-sized embossed German textile industry must face social challenges e.g. demographic change or technical changing processes. Interaction with intelligent systems (on machines) and increasing automation changes processes, working structures and employees’ tasks on all levels. Work contents are getting more complex, resulting in the necessity for diversified and enhanced competencies. Mobile devices like tablets or smartphones are increasingly finding their way into the workplace. Employees who grew up with new forms of media have certain advantages regarding the usage of modern technologies compared to older employees. Therefore, it is necessary to design new systems which help to adapt the competencies of both younger and older employees to new automated production processes in the digital work environment. The key to successful integration of technical assistance systems is user-orientated design and development that includes concepts for competency development under consideration of, e.g., ethical and legal aspects.

Nonlinear modeling, strength-based design, and testing of flexible piezoelectric energy harvesters under large dynamic loads for rotorcraft applications

NASA Astrophysics Data System (ADS)

Leadenham, Stephen; Erturk, Alper

2014-04-01

There has been growing interest in enabling wireless health and usage monitoring for rotorcraft applications, such as helicopter rotor systems. Large dynamic loads and acceleration fluctuations available in these environments make the implementation of vibration-based piezoelectric energy harvesters a very promising choice. However, such extreme loads transmitted to the harvester can also be detrimental to piezoelectric laminates and overall system reliability. Particularly flexible resonant cantilever configurations tuned to match the dominant excitation frequency can be subject to very large deformations and failure of brittle piezoelectric laminates due to excessive bending stresses at the root of the harvester. Design of resonant piezoelectric energy harvesters for use in these environments require nonlinear electroelastic dynamic modeling and strength-based analysis to maximize the power output while ensuring that the harvester is still functional. This paper presents a mathematical framework to design and analyze the dynamics of nonlinear flexible piezoelectric energy harvesters under large base acceleration levels. A strength-based limit is imposed to design the piezoelectric energy harvester with a proof mass while accounting for material, geometric, and dissipative nonlinearities, with a focus on two demonstrative case studies having the same linear fundamental resonance frequency but different overhang length and proof mass values. Experiments are conducted at different excitation levels for validation of the nonlinear design approach proposed in this work. The case studies in this work reveal that harvesters exhibiting similar behavior and power generation performance at low excitation levels (e.g. less than 0.1g) can have totally different strength-imposed performance limitations under high excitations (e.g. above 1g). Nonlinear modeling and strength-based design is necessary for such excitation levels especially when using resonant cantilevers with no geometric constraint.

Simulation of Blood flow in Different Configurations Design of Bi-leaflet Mechanical Heart Valve

NASA Astrophysics Data System (ADS)

Hafizah Mokhtar, N.; Abas, Aizat

2018-05-01

In this work, two different designs of artificial heart valve were devised and then compared by considering the thrombosis, wear and valve orifice to anatomical orifice ratio of each mechanical heart valve. These different design configurations of bi-leaflet mechanical heart valves model are created through the use of Computer-aided design (CAD) modelling and simulated using Computational fluid dynamic (CFD) software. Design 1 is based on existing conventional bi-leaflet valve and design 2 based on modified bi-leaflet respectively. The flow pattern, velocity, vorticity and stress analysis have been done to justify the best design. Based on results, both of the designs show a Doppler velocity index of less than the allowable standard of 2.2 which is safe to be used as replacement of the human heart valve. However, design 2 shows that it has a lower possibility of cavitation issue which will lead to lower thrombosis and provide good central flow area of blood as compared to design 1.

A Rule Based Approach to ISS Interior Volume Control and Layout

NASA Technical Reports Server (NTRS)

Peacock, Brian; Maida, Jim; Fitts, David; Dory, Jonathan

2001-01-01

Traditional human factors design involves the development of human factors requirements based on a desire to accommodate a certain percentage of the intended user population. As the product is developed human factors evaluation involves comparison between the resulting design and the specifications. Sometimes performance metrics are involved that allow leniency in the design requirements given that the human performance result is satisfactory. Clearly such approaches may work but they give rise to uncertainty and negotiation. An alternative approach is to adopt human factors design rules that articulate a range of each design continuum over which there are varying outcome expectations and interactions with other variables, including time. These rules are based on a consensus of human factors specialists, designers, managers and customers. The International Space Station faces exactly this challenge in interior volume control, which is based on anthropometric, performance and subjective preference criteria. This paper describes the traditional approach and then proposes a rule-based alternative. The proposed rules involve spatial, temporal and importance dimensions. If successful this rule-based concept could be applied to many traditional human factors design variables and could lead to a more effective and efficient contribution of human factors input to the design process.

Designing worked examples for learning tangent lines to circles

NASA Astrophysics Data System (ADS)

Retnowati, E.; Marissa

2018-03-01

Geometry is a branch of mathematics that deals with shape and space, including the circle. A difficult topic in the circle may be the tangent line to circle. This is considered a complex material since students have to simultaneously apply several principles to solve the problems, these are the property of circle, definition of the tangent, measurement and Pythagorean theorem. This paper discusses designs of worked examples for learning tangent line to circles and how to apply this design to an effective and efficient instructional activity. When students do not have sufficient prior knowledge, solving tangent problems might be clumsy, and as a consequence, the problem-solving activity hinders learning. According to a Cognitive Load Theory, learning occurs when students can construct new knowledge based on the relevant knowledge previously learned. When the relevant knowledge is unavailable, providing students with the worked example is suggested. Worked example may reduce unproductive process during learning that causes extraneous cognitive load. Nevertheless, worked examples must be created in such a way facilitate learning.

Using Experience-based Co-design with older patients, their families and staff to improve palliative care experiences in the Emergency Department: A reflective critique on the process and outcomes.

PubMed

Blackwell, Rebecca Wright Née; Lowton, Karen; Robert, Glenn; Grudzen, Corita; Grocott, Patricia

2017-03-01

Increasing use of emergency departments among older patients with palliative needs has led to the development of several service-level interventions intended to improve care quality. There is little evidence of patient and family involvement in developmental processes, and little is known about the experiences of - and preferences for - palliative care delivery in this setting. Participatory action research seeking to enable collaborative working between patients and staff should enhance the impact of local quality improvement work but has not been widely implemented in such a complex setting. To critique the feasibility of this methodology as a quality improvement intervention in complex healthcare settings, laying a foundation for future work. an Emergency Department in a large teaching hospital in the United Kingdom. Experience-based Co-design incorporating: 150h of nonparticipant observation; semi-structured interviews with 15 staff members about their experiences of palliative care delivery; 5 focus groups with 64 staff members to explore challenges in delivering palliative care; 10 filmed semi-structured interviews with palliative care patients or their family members; a co-design event involving staff, patients and family members. the study successfully identified quality improvement priorities leading to changes in Emergency Department-palliative care processes. Further outputs were the creation of a patient-family-staff experience training DVD to encourage reflective discussion and the identification and application of generic design principles for improving palliative care in the Emergency Department. There were benefits and challenges associated with using Experience-based Co-design in this setting. Benefits included the flexibility of the approach, the high levels of engagement and responsiveness of patients, families and staff, and the impact of using filmed narrative interviews to enhance the 'voice' of seldom heard patients and families. Challenges included high levels of staff turnover during the 19 month project, significant time constraints in the Emergency Department and the ability of older patients and their families to fully participate in the co-design process. Experience-based Co-design is a useful approach for encouraging collaborative working between vulnerable patients, family and staff in complex healthcare environments. The flexibility of the approach allows the specific needs of participants to be accounted for, enabling fuller engagement with those who typically may not be invited to contribute to quality improvement work. Recommendations for future studies in this and similar settings include testing the 'accelerated' form of the approach and experimenting with alternative ways of increasing involvement of patients/families in the co-design phase. Copyright © 2017 Elsevier Ltd. All rights reserved.

Refractive laser beam shaping by means of a functional differential equation based design approach.

PubMed

Duerr, Fabian; Thienpont, Hugo

2014-04-07

Many laser applications require specific irradiance distributions to ensure optimal performance. Geometric optical design methods based on numerical calculation of two plano-aspheric lenses have been thoroughly studied in the past. In this work, we present an alternative new design approach based on functional differential equations that allows direct calculation of the rotational symmetric lens profiles described by two-point Taylor polynomials. The formalism is used to design a Gaussian to flat-top irradiance beam shaping system but also to generate a more complex dark-hollow Gaussian (donut-like) irradiance distribution with zero intensity in the on-axis region. The presented ray tracing results confirm the high accuracy of both calculated solutions and emphasize the potential of this design approach for refractive beam shaping applications.

A mixed-methods systematic review of the effects of mindfulness on nurses.

PubMed

Guillaumie, Laurence; Boiral, Olivier; Champagne, Julie

2017-05-01

To review the effects of mindfulness-based interventions on Registered Nurses and nursing students. Work-related stress among nurses is estimated to be the biggest occupational health problem after musculoskeletal disorders. A mixed-method systematic review incorporating quantitative and qualitative data was conducted. Studies on the effects of mindfulness-based interventions for nurses and nursing students published between 1980 and 2014 were identified through a systematic search in electronic databases: Medline, Embase, PsycINFO, Cochrane Library and Cinahl. Data analysis was conducted based on the framework of Thomas and Harden (2004). A total of 32 studies, including 17 controlled designs, 11 pre-post designs and four qualitative designs were reviewed. Meta-analysis suggests that mindfulness-based interventions may be effective in significantly reducing state anxiety and depression at posttreatment and state anxiety and trait anxiety at follow-up. Qualitative studies and uncontrolled studies shed light on benefits overlooked in RCTs, including improvements in the well-being of individuals (e.g. inner state of calmness, awareness and enthusiasm) and improved performance at work (better communication with colleagues and patients, higher sensitivity to patients' experiences, clearer analysis of complex situations and emotional regulation in stressful contexts). Mindfulness appeared to improve nurses' mental health significantly. It could be used in worksite health promotion programmes. Only a few studies have explored the impact of mindfulness on nurses' professional behaviours and their relationships with patients and colleagues. Future research should further explore the long-term impacts of mindfulness on performance and well-being at work using sound methodological designs. © 2016 John Wiley & Sons Ltd.

Collaborative engineering-design support system

NASA Technical Reports Server (NTRS)

Lee, Dong HO; Decker, D. Richard

1994-01-01

Designing engineering objects requires many engineers' knowledge from different domains. There needs to be cooperative work among engineering designers to complete a design. Revisions of a design are time consuming, especially if designers work at a distance and with different design description formats. In order to reduce the design cycle, there needs to be a sharable design describing the engineering community, which can be electronically transportable. Design is a process of integrating that is not easy to define definitively. This paper presents Design Script which is a generic engineering design knowledge representation scheme that can be applied in any engineering domain. The Design Script is developed through encapsulation of common design activities and basic design components based on problem decomposition. It is implemented using CLIPS with a Windows NT graphical user interface. The physical relationships between engineering objects and their subparts can be constructed in a hierarchical manner. The same design process is repeatedly applied at each given level of hierarchy and recursively into lower levels of the hierarchy. Each class of the structure can be represented using the Design Script.

Design And Implementation Of Integrated Vision-Based Robotic Workcells

NASA Astrophysics Data System (ADS)

Chen, Michael J.

1985-01-01

Reports have been sparse on large-scale, intelligent integration of complete robotic systems for automating the microelectronics industry. This paper describes the application of state-of-the-art computer-vision technology for manufacturing of miniaturized electronic components. The concepts of FMS - Flexible Manufacturing Systems, work cells, and work stations and their control hierarchy are illustrated in this paper. Several computer-controlled work cells used in the production of thin-film magnetic heads are described. These cells use vision for in-process control of head-fixture alignment and real-time inspection of production parameters. The vision sensor and other optoelectronic sensors, coupled with transport mechanisms such as steppers, x-y-z tables, and robots, have created complete sensorimotor systems. These systems greatly increase the manufacturing throughput as well as the quality of the final product. This paper uses these automated work cells as examples to exemplify the underlying design philosophy and principles in the fabrication of vision-based robotic systems.

A theoretical treatment of technical risk in modern propulsion system design

NASA Astrophysics Data System (ADS)

Roth, Bryce Alexander

2000-09-01

A prevalent trend in modern aerospace systems is increasing complexity and cost, which in turn drives increased risk. Consequently, there is a clear and present need for the development of formalized methods to analyze the impact of risk on the design of aerospace vehicles. The objective of this work is to develop such a method that enables analysis of risk via a consistent, comprehensive treatment of aerothermodynamic and mass properties aspects of vehicle design. The key elements enabling the creation of this methodology are recent developments in the analytical estimation of work potential based on the second law of thermodynamics. This dissertation develops the theoretical foundation of a vehicle analysis method based on work potential and validates it using the Northrop F-5E with GE J85-GE-21 engines as a case study. Although the method is broadly applicable, emphasis is given to aircraft propulsion applications. Three work potential figures of merit are applied using this method: exergy, available energy, and thrust work potential. It is shown that each possesses unique properties making them useful for specific vehicle analysis tasks, though the latter two are actually special cases of exergy. All three are demonstrated on the analysis of the J85-GE-21 propulsion system, resulting in a comprehensive description of propulsion system thermodynamic loss. This "loss management" method is used to analyze aerodynamic drag loss of the F-5E and is then used in conjunction with the propulsive loss model to analyze the usage of fuel work potential throughout the F-5E design mission. The results clearly show how and where work potential is used during flight and yield considerable insight as to where the greatest opportunity for design improvement is. Next, usage of work potential is translated into fuel weight so that the aerothermodynamic performance of the F-5E can be expressed entirely in terms of vehicle gross weight. This technique is then applied as a means to quantify the impact of engine cycle technologies on the F-5E airframe. Finally, loss management methods are used in conjunction with probabilistic analysis methods to quantify the impact of risk on F-5E aerothermodynamic performance.

CDC MessageWorks: Designing and Validating a Social Marketing Tool to Craft and Defend Effective Messages

PubMed Central

Cole, Galen E.; Keller, Punam A.; Reynolds, Jennifer; Schaur, Michelle; Krause, Diane

2016-01-01

The Centers for Disease Control and Prevention’s Division of Cancer Prevention and Control, in partnership with Oak Ridge Associated Universities, designed an online social marketing strategy tool, MessageWorks, to help health communicators effectively formulate messages aimed at changing health behaviors and evaluate message tactics and audience characteristics. MessageWorks is based on the advisor for risk communication model that identifies 10 variables that can be used to predict target audience intentions to comply with health recommendations. This article discusses the value of the MessageWorks tool to health communicators and to the field of social marketing by (1) describing the scientific evidence supporting use of MessageWorks to improve health communication practice and (2) summarizing how to use MessageWorks and interpret the results it produces. PMID:26877714

The implementation of Project-Based Learning in courses Audio Video to Improve Employability Skills

NASA Astrophysics Data System (ADS)

Sulistiyo, Edy; Kustono, Djoko; Purnomo; Sutaji, Eddy

2018-04-01

This paper presents a project-based learning (PjBL) in subjects with Audio Video the Study Programme Electro Engineering Universitas Negeri Surabaya which consists of two ways namely the design of the prototype audio-video and assessment activities project-based learning tailored to the skills of the 21st century in the form of employability skills. The purpose of learning innovation is applying the lab work obtained in the theory classes. The PjBL aims to motivate students, centering on the problems of teaching in accordance with the world of work. Measures of learning include; determine the fundamental questions, designs, develop a schedule, monitor the learners and progress, test the results, evaluate the experience, project assessment, and product assessment. The results of research conducted showed the level of mastery of the ability to design tasks (of 78.6%), technical planning (39,3%), creativity (42,9%), innovative (46,4%), problem solving skills (the 57.1%), skill to communicate (75%), oral expression (75%), searching and understanding information (to 64.3%), collaborative work skills (71,4%), and classroom conduct (of 78.6%). In conclusion, instructors have to do the reflection and make improvements in some of the aspects that have a level of mastery of the skills less than 60% both on the application of project-based learning courses, audio video.

Drafting standards on cognitive accessibility: a global collaboration.

PubMed

Steel, Emily J; Janeslätt, Gunnel

2017-05-01

The International Organization for Standardization (ISO) is working on accessibility of products to support people with cognitive impairment. Working Group 10, within the technical committee 173 (assistive products for persons with disability) was formed in 2014 to draft standards for assistive products that support people with cognitive impairment. This article explains the scope and purpose of the working group and the context for its formation, and describes the plans and process for drafting and publishing new international standards. The proposed suite of standards is presented, with examples from a draft standard on daily time management. It draws on international research evidence for the effectiveness of assistive products designed to support time management in people with cognitive impairment. Examples of assistive products and their key features are provided based on domains of time as defined in the International Classification of Functioning, Disability and Health for Children and Youth (ICF-CY). The proposed standards will provide design recommendations for features and functions that increase the accessibility of products used by people with cognitive impairment. They are intended to be used by designers, manufactures, educators and services providers, to facilitate their commitment to inclusion and demonstrate their willingness to work with accessibility regulation. Implications for Rehabilitation New standards based on universal design (UD) principles can guide the design of more user-friendly assistive products for people with cognitive impairment. Greater usability of assistive products, whether mainstream or specially-designed, will make it easier for practitioners to find and introduce assistive solutions to individuals with cognitive impairment. Greater usability of assistive products for daily time management can decrease the need for user training and support and enable participation.

Escaping the healthcare leadership cul-de-sac.

PubMed

Edmonstone, John Duncan

2017-02-06

Purpose This paper aims to propose that healthcare is dominated by a managerialist ideology, powerfully shaped by business schools and embodied in the Masters in Business Administration. It suggests that there may be unconscious collusion between universities, healthcare employers and student leaders and managers. Design/methodology/approach Based on a review of relevant literature, the paper examines critiques of managerialism generally and explores the assumptions behind leadership development. It draws upon work which suggests that leading in healthcare organisations is fundamentally different and proposes that leadership development should be more practice-based. Findings The way forward for higher education institutions is to include work- or practice-based approaches alongside academic approaches. Practical implications The paper suggests that there is a challenge for higher education institutions to adopt and integrate practice-based development methods into their programme designs. Originality/value The paper provides a challenge to the future role of higher education institutions in developing leadership in healthcare.

Optimization of the Robotic Joint Equipped with Epicyloidal Gear and Direct Drive for Space Applications

NASA Astrophysics Data System (ADS)

Seweryn, Karol; Grassmann, Kamil; Ciesielska, Monika; Rybus, Tomasz; Turek, Michal

2013-09-01

One of the most critical element in the orbital manipulators are kinematic joints. Joints must be adapted to work in tough conditions of space environment and must ensure the greatest efficiency and work without backlash. At the Space Mechatronics and Robotics Laboratory (LMRS) of the Space Research Centre, PAS our team designed and built a lightweight kinematic pair based on a new concept. The new concept is based on the epicycloid two-stage gearbox with torque motor. In this paper we have focused on optimization of the joint design for space application. The optimization was focused on the minimization of the mass and backlash effects and on maximizing the joint efficiency.

Rethinking Physics for Biologists: A design-based research approach

NASA Astrophysics Data System (ADS)

Sawtelle, Vashti

2015-03-01

Biology majors at the University of Maryland are required to take courses in biology, chemistry, and physics - but they often see these courses as disconnected. Over the past three years the NEXUS/Physics course has been working to develop an interdisciplinary learning environment that bridges the disciplinary domains of biology and physics. Across the three years we have gone from teaching in a small class with one instructor to teaching in a large lecture hall with multiple instructors. We have used a design-based research approach to support critical reflection of the course at multiple-time scales. In this presentation I will detail our process of collecting systematic data, listening to and valuing students' reasoning, and bridging diverse perspectives led. I will demonstrate how this process led to improved curricular design, refined assessment objectives, and new design heuristics. This work is supported by NSF-TUES DUE 11-22818, the HHMI NEXUS grant, and a NSF Graduate Research Fellowship (DGE 0750616).

High order cell-centered scheme totally based on cell average

NASA Astrophysics Data System (ADS)

Liu, Ze-Yu; Cai, Qing-Dong

2018-05-01

This work clarifies the concept of cell average by pointing out the differences between cell average and cell centroid value, which are averaged cell-centered value and pointwise cell-centered value, respectively. Interpolation based on cell averages is constructed and high order QUICK-like numerical scheme is designed for such interpolation. A new approach of error analysis is introduced in this work, which is similar to Taylor’s expansion.

Product design for energy reduction in concurrent engineering: An Inverted Pyramid Approach

NASA Astrophysics Data System (ADS)

Alkadi, Nasr M.

Energy factors in product design in concurrent engineering (CE) are becoming an emerging dimension for several reasons; (a) the rising interest in "green design and manufacturing", (b) the national energy security concerns and the dramatic increase in energy prices, (c) the global competition in the marketplace and global climate change commitments including carbon tax and emission trading systems, and (d) the widespread recognition of the need for sustainable development. This research presents a methodology for the intervention of energy factors in concurrent engineering product development process to significantly reduce the manufacturing energy requirement. The work presented here is the first attempt at integrating the design for energy in concurrent engineering framework. It adds an important tool to the DFX toolbox for evaluation of the impact of design decisions on the product manufacturing energy requirement early during the design phase. The research hypothesis states that "Product Manufacturing Energy Requirement is a Function of Design Parameters". The hypothesis was tested by conducting experimental work in machining and heat treating that took place at the manufacturing lab of the Industrial and Management Systems Engineering Department (IMSE) at West Virginia University (WVU) and at a major U.S steel manufacturing plant, respectively. The objective of the machining experiment was to study the effect of changing specific product design parameters (Material type and diameter) and process design parameters (metal removal rate) on a gear head lathe input power requirement through performing defined sets of machining experiments. The objective of the heat treating experiment was to study the effect of varying product charging temperature on the fuel consumption of a walking beams reheat furnace. The experimental work in both directions have revealed important insights into energy utilization in machining and heat-treating processes and its variance based on product, process, and system design parameters. In depth evaluation to how the design and manufacturing normally happen in concurrent engineering provided a framework to develop energy system levels in machining within the concurrent engineering environment using the method of "Inverted Pyramid Approach", (IPA). The IPA features varying levels of output energy based information depending on the input design parameters that is available during each stage (level) of the product design. The experimental work, the in-depth evaluation of design and manufacturing in CE, and the developed energy system levels in machining provided a solid base for the development of the model for the design for energy reduction in CE. The model was used to analyze an example part where 12 evolving designs were thoroughly reviewed to investigate the sensitivity of energy to design parameters in machining. The model allowed product design teams to address manufacturing energy concerns early during the design stage. As a result, ranges for energy sensitive design parameters impacting product manufacturing energy consumption were found in earlier levels. As designer proceeds to deeper levels in the model, this range tightens and results in significant energy reductions.

Gaming against medical errors: methods and results from a design game on CPOE.

PubMed

Kanstrup, Anne Marie; Nøhr, Christian

2009-01-01

The paper presents design game as a technique for participatory design for a Computerized Decision Support System (CDSS) for minimizing medical errors. Design game is used as a technique for working with the skills of users, the complexity of the use practice and the negotiation of design here within the challenging domain of medication. The paper presents a developed design game based on game inspiration from a computer game, theoretical inspiration on electronic decision support, and empirical grounding in scenarios of medical errors. The game has been played in a two-hour workshop with six clinicians. The result is presented as a list of central themes for design of CDSS and derived design principles from these themes. These principles are currently under further exploration in follow up prototype based activities.

Anisotropic transmissive coding metamaterials based on dispersion modulation of spoof surface plasmon polaritons

NASA Astrophysics Data System (ADS)

Pang, Yongqiang; Li, Yongfeng; Zhang, Jieqiu; Chen, Hongya; Xu, Zhuo; Qu, Shaobo

2018-06-01

Anisotropic transmissive coding metamaterials (CMMs) have been designed and demonstrated in this work. High-efficiency transmission with the amplitudes close to unity is achieved by ultrathin metallic tapered blade structures, on which incident waves can be highly coupled into spoof surface plasmon polaritons (SSPPs). The transmission phase can be therefore manipulated with much freedom by designing the dispersion of the SSPPs. These tapered blade structures are designed as the anisotropic unit cells of the CMMs. Two 1-bit anisotropic CMMs with different coding sequences were first designed and simulated, and then a 2-bit anisotropic CMM was designed and measured experimentally. The measured results agree well with the simulations. It is expected that this work provides an alternative method for designing the transmissive CMMs, and may find potential applications in the beam forming technique.

Design of smart prosthetic knee utilizing magnetorheological damper

NASA Astrophysics Data System (ADS)

Gao, F.; Liu, Y. N.; Liao, W. H.

2017-04-01

In this study, based on human knee's kinetics, a smart prosthetic knee employing springs, DC motor and magnetorheological (MR) damper is designed. The MR damper is coupled in series with the springs that are mounted in parallel with the DC motor. The working principle of the prosthesis during level-ground walking is presented. During stance phase, the MR damper is powered on. The springs will store and release the negative mechanical energy for restoring the function of human knee joint. In swing phase, the MR damper is powered off for disengaging the springs. In this phase, the work of knee joint is negative. For improving the system energy efficiency, the DC motor will work as a power generator to supply required damping torque and harvest electrical energy. Finally, the design of MR damper is introduced.

Mutual interferences and design principles for mechatronic devices in magnetic resonance imaging.

PubMed

Yu, Ningbo; Gassert, Roger; Riener, Robert

2011-07-01

Robotic and mechatronic devices that work compatibly with magnetic resonance imaging (MRI) are applied in diagnostic MRI, image-guided surgery, neurorehabilitation and neuroscience. MRI-compatible mechatronic systems must address the challenges imposed by the scanner's electromagnetic fields. We have developed objective quantitative evaluation criteria for device characteristics needed to formulate design guidelines that ensure MRI-compatibility based on safety, device functionality and image quality. The mutual interferences between an MRI system and mechatronic devices working in its vicinity are modeled and tested. For each interference, the involved components are listed, and a numerical measure for "MRI-compatibility" is proposed. These interferences are categorized into an MRI-compatibility matrix, with each element representing possible interactions between one part of the mechatronic system and one component of the electromagnetic fields. Based on this formulation, design principles for MRI-compatible mechatronic systems are proposed. Furthermore, test methods are developed to examine whether a mechatronic device indeed works without interferences within an MRI system. Finally, the proposed MRI-compatibility criteria and design guidelines have been applied to an actual design process that has been validated by the test procedures. Objective and quantitative MRI-compatibility measures for mechatronic and robotic devices have been established. Applying the proposed design principles, potential problems in safety, device functionality and image quality can be considered in the design phase to ensure that the mechatronic system will fulfill the MRI-compatibility criteria. New guidelines and test procedures for MRI instrument compatibility provide a rational basis for design and evaluation of mechatronic devices in various MRI applications. Designers can apply these criteria and use the tests, so that MRI-compatibility results can accrue to build an experiential database.

Mechanical Structural Design of a MEMS-Based Piezoresistive Accelerometer for Head Injuries Monitoring: A Computational Analysis by Increments of the Sensor Mass Moment of Inertia †

PubMed Central

Messina, Marco; Njuguna, James; Palas, Chrysovalantis

2018-01-01

This work focuses on the proof-mass mechanical structural design improvement of a tri-axial piezoresistive accelerometer specifically designed for head injuries monitoring where medium-G impacts are common; for example, in sports such as racing cars or American Football. The device requires the highest sensitivity achievable with a single proof-mass approach, and a very low error (<1%) as the accuracy for these types of applications is paramount. The optimization method differs from previous work as it is based on the progressive increment of the sensor proof-mass mass moment of inertia (MMI) in all three axes. Three different designs are presented in this study, where at each step of design evolution, the MMI of the sensor proof-mass gradually increases in all axes. The work numerically demonstrates that an increment of MMI determines an increment of device sensitivity with a simultaneous reduction of cross-axis sensitivity in the particular axis under study. This is due to the linkage between the external applied stress and the distribution of mass (of the proof-mass), and therefore of its mass moment of inertia. Progressively concentrating the mass on the axes where the piezoresistors are located (i.e., x- and y-axis) by increasing the MMI in the x- and y-axis, will undoubtedly increase the longitudinal stresses applied in that areas for a given external acceleration, therefore increasing the piezoresistors fractional resistance change and eventually positively affecting the sensor sensitivity. The final device shows a sensitivity increase of about 80% in the z-axis and a reduction of cross-axis sensitivity of 18% respect to state-of-art sensors available in the literature from a previous work of the authors. Sensor design, modelling, and optimization are presented, concluding the work with results, discussion, and conclusion. PMID:29351221

Investigations into Novel Multi-Band Antenna Designs

DTIC Science & Technology

2006-08-01

endeavouring to modify the designs to incorporate dual polarisation , building the antennas, as well as experimental work that will use the manufactured...based on the Koch, Minkowski and Hilbert curves. The merit in this approach is that non -Euclidean designs (i.e. fractals) are compared with Euclidean... polarisation . A number of possible changes to the current design need to be explored towards achieving the above objectives. Some of the suggested

Scheduling and Topology Design in Networks with Directional Antennas

DTIC Science & Technology

2017-05-19

emergency response networks was recently studied in [14] and [15]. This work examines the topology control problem in group - based wireless networks that...Broadcast Fig. 7: Max-min throughput ⇢ versus number of nodes for non -uniform edge capacities [14] T. Suzuki, et al. “Directional Antenna Control based...Scheduling and Topology Design in Networks with Directional Antennas Thomas Stahlbuhk, Nathaniel M. Jones, Brooke Shrader Lincoln Laboratory

An Auto-management Thesis Program WebMIS Based on Workflow

NASA Astrophysics Data System (ADS)

Chang, Li; Jie, Shi; Weibo, Zhong

An auto-management WebMIS based on workflow for bachelor thesis program is given in this paper. A module used for workflow dispatching is designed and realized using MySQL and J2EE according to the work principle of workflow engine. The module can automatively dispatch the workflow according to the date of system, login information and the work status of the user. The WebMIS changes the management from handwork to computer-work which not only standardizes the thesis program but also keeps the data and documents clean and consistent.

Design of two-channel filter bank using nature inspired optimization based fractional derivative constraints.

PubMed

Kuldeep, B; Singh, V K; Kumar, A; Singh, G K

2015-01-01

In this article, a novel approach for 2-channel linear phase quadrature mirror filter (QMF) bank design based on a hybrid of gradient based optimization and optimization of fractional derivative constraints is introduced. For the purpose of this work, recently proposed nature inspired optimization techniques such as cuckoo search (CS), modified cuckoo search (MCS) and wind driven optimization (WDO) are explored for the design of QMF bank. 2-Channel QMF is also designed with particle swarm optimization (PSO) and artificial bee colony (ABC) nature inspired optimization techniques. The design problem is formulated in frequency domain as sum of L2 norm of error in passband, stopband and transition band at quadrature frequency. The contribution of this work is the novel hybrid combination of gradient based optimization (Lagrange multiplier method) and nature inspired optimization (CS, MCS, WDO, PSO and ABC) and its usage for optimizing the design problem. Performance of the proposed method is evaluated by passband error (ϕp), stopband error (ϕs), transition band error (ϕt), peak reconstruction error (PRE), stopband attenuation (As) and computational time. The design examples illustrate the ingenuity of the proposed method. Results are also compared with the other existing algorithms, and it was found that the proposed method gives best result in terms of peak reconstruction error and transition band error while it is comparable in terms of passband and stopband error. Results show that the proposed method is successful for both lower and higher order 2-channel QMF bank design. A comparative study of various nature inspired optimization techniques is also presented, and the study singles out CS as a best QMF optimization technique. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Building bridges between theory and practice in medical education using a design-based research approach: AMEE Guide No. 60.

PubMed

Dolmans, Diana H J M; Tigelaar, D

2012-01-01

Medical education research has grown enormously over the past 20 years, but it does not sufficiently make use of theories, according to influential leaders and researchers in this field. In this AMEE Guide, it is argued that design-based research (DBR) studies should be conducted much more in medical education design research because these studies both advance the testing and refinement of theories and advance educational practice. In this Guide, the essential characteristics of DBR as well as how DBR differs from other approach such as formative evaluation are explained. It is also explained what the pitfalls and challenges of DBR are. The main challenges deal with how to insure that DBR studies reveal findings that are of a broader relevance than the local situation and how to insure that DBR contributes toward theory testing and refinement. An example of a series of DBR studies on the design of a teaching portfolio in higher education that is aimed at stimulating a teacher's professional development is described, to illustrate how DBR studies actually work in practice. Finally, it is argued that DBR-studies could play an important role in the advancement of theory and practice in the two broad domains of designing or redesigning work-based learning environments and assessment programs.

Using Student Group Work in Higher Education to Emulate Professional Communities of Practice

ERIC Educational Resources Information Center

Fearon, Colm; McLaughlin, Heather; Eng, Tan Yoke

2012-01-01

Purpose: The purpose of this paper is to discuss the value of social learning from group work that emulates a professional community of practice. Design/methodology/approach: A thought piece that first, examines the role of group-work projects as part of social learning, then outlines key arguments for social learning based upon applying a…

Video Interaction Guidance in Collaborative Group Work: Impact on Primary School Pupils' Self-Esteem and Behaviours

ERIC Educational Resources Information Center

Musset, Matthew; Topping, Keith

2017-01-01

Video interaction guidance (VIG) is an increasingly recognised evidence-based intervention. VIG was used to enhance pupil responses during a group work programme. Fifteen primary-aged classes across a range of socio-economic status received regular group work over a year. A mixed methods repeated measures design involved nine experimental classes…

Designing Worked Examples in Statics to Promote an Expert Stance: Working THRU vs. Working OUT

ERIC Educational Resources Information Center

Calfee, Robert; Stahovich, Thomas

2011-01-01

The purpose of this study was to examine the performance patterns of freshman engineering students as they completed a tutorial on freebody problems that employed a computer-based pen (CBP) to provide feedback and direct learning. A secondary analysis was conducted on detailed performance data for 16 participants from a freshman Engineering course…

Understanding Task-in-Process through the Lens of Laughter: Activity Designs, Instructional Materials, Learner Orientations, and Interpersonal Relationships

ERIC Educational Resources Information Center

Hasegawa, Atsushi

2018-01-01

Using the framework of conversation analysis, this study investigated the interactional workings of laughter in task-based interactions. The analysis was drawn from 160 cases of pair work interactions, collected in 2nd-semester Japanese-as-a-foreign-language classrooms. The pair work activities examined in this study are mostly grammar-focused,…

Health Care Mentors: A Work-Based Approach to Developing the Health Care Workforce of Tomorrow. [Fourth Edition]. Career Exploration.

ERIC Educational Resources Information Center

GMS Partners, Inc. Silver Spring, MD.

Designed as the final step in a carefully articulated work-readiness program, Mentors provides students interested in health care careers with an opportunity to develop superior employability skills, while striking a balance between work and school. The Mentors program links the school community, the student, and host organizations in a mutually…

Understanding Accounting as a Career: An Immersion Work Experience for Students Making Career Decisions

ERIC Educational Resources Information Center

McGrath, Dianne; Murphy, Daniel

2016-01-01

This paper reports on a project which is designed to increase the participation of high school students in accounting work experience placements. The focus of the paper is on an Australian-based project which overcomes the identified barriers to offering high school accounting work experience placements with a resultant increase in the number and…

Advancing Work Practices: Rethinking Online Professional Development in the Context of the Intervention-Based Sustainable Change

ERIC Educational Resources Information Center

Noesgaard, Signe Schack

2016-01-01

Purpose: The paper aims to discuss the effectiveness of e-Learning in advancing work practices. The paper investigates the assumption that e-Learning is as effective as face-to-face interventions when stimulating change. It also examines the assumption that well-designed and well-executed instructional interventions will advance work practices.…

Computer aided fixture design - A case based approach

NASA Astrophysics Data System (ADS)

Tanji, Shekhar; Raiker, Saiesh; Mathew, Arun Tom

2017-11-01

Automated fixture design plays important role in process planning and integration of CAD and CAM. An automated fixture setup design system is developed where when fixturing surfaces and points are described allowing modular fixture components to get automatically select for generating fixture units and placed into position with satisfying assembled conditions. In past, various knowledge based system have been developed to implement CAFD in practice. In this paper, to obtain an acceptable automated machining fixture design, a case-based reasoning method with developed retrieval system is proposed. Visual Basic (VB) programming language is used in integrating with SolidWorks API (Application programming interface) module for better retrieval procedure reducing computational time. These properties are incorporated in numerical simulation to determine the best fit for practical use.

Combating Learning

ERIC Educational Resources Information Center

Jarvensivu, Anu; Koski, Pasi

2012-01-01

Purpose: The purpose of this paper is to look at workplace learning through research into sociology of work. It explores the "learning discourse" at work place level looking for possibilities to oppose learning. Design/methodology/approach: This paper is based on case studies conducted at six workplaces. The data on the cases include…

Organizational Design Drivers to Enable Emergent Creativity in Web-Based Communities

ERIC Educational Resources Information Center

De Toni, Alberto F.; Biotto, Gianluca; Battistella, Cinzia

2012-01-01

Purpose: In the stream of works studying complexity from an organizational viewpoint, literature is focused mainly on describing new organizational forms (holonic organization, circular organization, virtual corporation, ...) and on conceptual works identifying new managerial principles to manage emergence (job enrichment, de-regulation, ...). But…

[Design of an embedded stroke rehabilitation apparatus system based on Linux computer engineering].

PubMed

Zhuang, Pengfei; Tian, XueLong; Zhu, Lin

2014-04-01

A realizaton project of electrical stimulator aimed at motor dysfunction of stroke is proposed in this paper. Based on neurophysiological biofeedback, this system, using an ARM9 S3C2440 as the core processor, integrates collection and display of surface electromyography (sEMG) signal, as well as neuromuscular electrical stimulation (NMES) into one system. By embedding Linux system, the project is able to use Qt/Embedded as a graphical interface design tool to accomplish the design of stroke rehabilitation apparatus. Experiments showed that this system worked well.

A Praxeological Perspective for the Design and Implementation of a Digital Role-Play Game

ERIC Educational Resources Information Center

Sanchez, Eric; Monod-Ansaldi, Réjane; Vincent, Caroline; Safadi-Katouzian, Sina

2017-01-01

This paper draws on an empirical work dedicated to discussing a theoretical model for design-based research. The context of our study is a research project for the design, the implementation and the analysis of Insectophagia, a digital role-play game implemented in secondary schools. The model presented in this paper aims at conceptualizing…

Using ICT for Training Teachers in Design and Technology Education (TTDTE)

ERIC Educational Resources Information Center

Thorsteinsson, Gísli

2012-01-01

The paper outlines the TTPTE project (2010-2011) which was based on the need for innovative and effective ideas for increasing the efficiency of teachers' in design and technology daily work. The project was aimed at finding new ways of how to support in-service teachers in design and technology education and how teachers themselves can upgrade…

Green ergonomics: definition and scope.

PubMed

Thatcher, Andrew

2013-01-01

This paper demonstrates that the goals of ergonomics (i.e. effectiveness, efficiency, health, safety and usability) are closely aligned with the goals of design for environmental sustainability. In this paper, the term 'green ergonomics' is conceptualised to specifically describe ergonomics interventions with a pro-nature emphasis. Green ergonomics is focused on the bi-directional connections between human systems and nature. This involves looking at (1) how ergonomics design and evaluation might be used to conserve, preserve, and restore nature and (2) how ecosystem services might be harnessed to facilitate the improved wellbeing and effectiveness of human systems. The paper proposes the scope of green ergonomics based on these bi-directional relationships in the areas of the design of low resource systems and products, the design of green jobs, and the design for behaviour change. Suggestions for further work in the green ergonomics domain are also made. Given the enormous environmental challenges facing modern industrial society, this paper encourages ergonomics science to embrace a pro-nature understanding of work design and research. This paper sets out the role for green ergonomics based on an appreciation of the human-nature connections that have been integrated with our understanding of ergonomics science and practice.

Articulating learning activities for design between university and the workplace. A didactic analysis

NASA Astrophysics Data System (ADS)

Zaid, Abdelkarim

2013-08-01

This paper accounts for research looking at the following question: in what way can university-located training activities be articulated with those in companies for work-based engineering students? Here, we will present an overview of research about both training periods, i.e. in the companies and at university. We focus on the trainee's actual activities and written work from a didactic point of view, a perspective which has been rarely mentioned in previous studies about work-based training in engineering. We aim to describe the activities of trainee engineers during industrial and academic training. Training activities in design engineering will be analysed in terms of knowledge acquisition and how this knowledge is put into practice during the two parts of the training. In doing so, we will obtain a better picture of what trainees, trainers and tutors really do.

Experimental Learning Enhancing Improvisation Skills

ERIC Educational Resources Information Center

Pereira Christopoulos, Tania; Wilner, Adriana; Trindade Bestetti, Maria Luisa

2016-01-01

Purpose: This study aims to present improvisation training and experimentation as an alternative method to deal with unexpected events in which structured processes do not seem to work. Design/Methodology/Approach: Based on the literature of sensemaking and improvisation, the study designs a framework and process model of experimental learning…

Destination Math. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2009

2009-01-01

"Destination Math" is a series of computer-based curricula designed to be used for at least 90 minutes a week. Featuring sequenced, prescriptive, step-by-step instruction, "Destination Math" is designed for the development of fluency in critical skills, math reasoning, conceptual understanding, and problem-solving skills.…

Space-Inspired Trailers Encourage Exploration on Earth

NASA Technical Reports Server (NTRS)

2013-01-01

Architect Garret Finney joined Johnson Space Center's Habitability Design Center to work on creating comfortable, efficiently designed crew quarters for the ISS. Drawing directly on that experience, Finney founded Houston-based Cricket and set about creating unique, versatile recreational trailers that incorporate space habitat principles and features.

Design and analysis of sustainable computer mouse using design for disassembly methodology

NASA Astrophysics Data System (ADS)

Roni Sahroni, Taufik; Fitri Sukarman, Ahmad; Agung Mahardini, Karunia

2017-12-01

This paper presents the design and analysis of computer mouse using Design for Disassembly methodology. Basically, the existing computer mouse model consist a number of unnecessary part that cause the assembly and disassembly time in production. The objective of this project is to design a new computer mouse based on Design for Disassembly (DFD) methodology. The main methodology of this paper was proposed from sketch generation, concept selection, and concept scoring. Based on the design screening, design concept B was selected for further analysis. New design of computer mouse is proposed using fastening system. Furthermore, three materials of ABS, Polycarbonate, and PE high density were prepared to determine the environmental impact category. Sustainable analysis was conducted using software SolidWorks. As a result, PE High Density gives the lowers amount in the environmental category with great maximum stress value.

Permanent magnet motors

NASA Astrophysics Data System (ADS)

Richter, E.

1984-09-01

The work deals with the design and analysis study for the conceptual design of an economical high efficiency ac motor based on permanent magnets. The design and trade off studies have covered the material considerations, the design tradeoff options as well as transient and steady state performance considerations, and other options. The baseline comparison is the high efficiency induction motor. The permanent magnet (PM) motor must fit into the same frame size and surpass the induction motor on a life cost basis that includes 2.5 years of operation at a 50% duty cycle. It is shown that a motor based upon ferrite magnets does meet the objectives of the program in ratings of up to 25 hp. A 7.5 motor design is carried through the conceptual design stage.

Designing of routing algorithms in autonomous distributed data transmission system for mobile computing devices with ‘WiFi-Direct’ technology

NASA Astrophysics Data System (ADS)

Nikitin, I. A.; Sherstnev, V. S.; Sherstneva, A. I.; Botygin, I. A.

2017-02-01

The results of the research of existent routing protocols in wireless networks and their main features are discussed in the paper. Basing on the protocol data, the routing protocols in wireless networks, including search routing algorithms and phone directory exchange algorithms, are designed with the ‘WiFi-Direct’ technology. Algorithms without IP-protocol were designed, and that enabled one to increase the efficiency of the algorithms while working only with the MAC-addresses of the devices. The developed algorithms are expected to be used in the mobile software engineering with the Android platform taken as base. Easier algorithms and formats of the well-known route protocols, rejection of the IP-protocols enables to use the developed protocols on more primitive mobile devices. Implementation of the protocols to the engineering industry enables to create data transmission networks among working places and mobile robots without any access points.

Control theory based airfoil design using the Euler equations

NASA Technical Reports Server (NTRS)

Jameson, Antony; Reuther, James

1994-01-01

This paper describes the implementation of optimization techniques based on control theory for airfoil design. In our previous work it was shown that control theory could be employed to devise effective optimization procedures for two-dimensional profiles by using the potential flow equation with either a conformal mapping or a general coordinate system. The goal of our present work is to extend the development to treat the Euler equations in two-dimensions by procedures that can readily be generalized to treat complex shapes in three-dimensions. Therefore, we have developed methods which can address airfoil design through either an analytic mapping or an arbitrary grid perturbation method applied to a finite volume discretization of the Euler equations. Here the control law serves to provide computationally inexpensive gradient information to a standard numerical optimization method. Results are presented for both the inverse problem and drag minimization problem.

A Practical, Hardware Friendly MMSE Detector for MIMO-OFDM-Based Systems

NASA Astrophysics Data System (ADS)

Kim, Hun Seok; Zhu, Weijun; Bhatia, Jatin; Mohammed, Karim; Shah, Anish; Daneshrad, Babak

2008-12-01

Design and implementation of a highly optimized MIMO (multiple-input multiple-output) detector requires cooptimization of the algorithm with the underlying hardware architecture. Special attention must be paid to application requirements such as throughput, latency, and resource constraints. In this work, we focus on a highly optimized matrix inversion free [InlineEquation not available: see fulltext.] MMSE (minimum mean square error) MIMO detector implementation. The work has resulted in a real-time field-programmable gate array-based implementation (FPGA-) on a Xilinx Virtex-2 6000 using only 9003 logic slices, 66 multipliers, and 24 Block RAMs (less than 33% of the overall resources of this part). The design delivers over 420 Mbps sustained throughput with a small 2.77-microsecond latency. The designed [InlineEquation not available: see fulltext.] linear MMSE MIMO detector is capable of complying with the proposed IEEE 802.11n standard.

CAD system of design and engineering provision of die forming of compressor blades for aircraft engines

NASA Astrophysics Data System (ADS)

Khaimovich, I. N.

2017-10-01

The articles provides the calculation algorithms for blank design and die forming fitting to produce the compressor blades for aircraft engines. The design system proposed in the article allows generating drafts of trimming and reducing dies automatically, leading to significant reduction of work preparation time. The detailed analysis of the blade structural elements features was carried out, the taken limitations and technological solutions allowed forming generalized algorithms of forming parting stamp face over the entire circuit of the engraving for different configurations of die forgings. The author worked out the algorithms and programs to calculate three dimensional point locations describing the configuration of die cavity. As a result the author obtained the generic mathematical model of final die block in the form of three-dimensional array of base points. This model is the base for creation of engineering documentation of technological equipment and means of its control.

Hercules Single-Stage Reusable Vehicle (HSRV) Operating Base

NASA Technical Reports Server (NTRS)

Moon, Michael J.; McCleskey, Carey M.

2017-01-01

Conceptual design for the layout of lunar-planetary surface support systems remains an important area needing further master planning. This paper explores a structured approach to organize the layout of a Mars-based site equipped for routinely flying a human-scale reusable taxi system. The proposed Hercules Transportation System requires a surface support capability to sustain its routine, affordable, and dependable operation. The approach organizes a conceptual Hercules operating base through functional station sets. The station set approach will allow follow-on work to trade design approaches and consider technologies for more efficient flow of material, energy, and information at future Mars bases and settlements. The station set requirements at a Mars site point to specific capabilities needed. By drawing from specific Hercules design characteristics, the technology requirements for surface-based systems will come into greater focus. This paper begins a comprehensive process for documenting functional needs, architectural design methods, and analysis techniques necessary for follow-on concept studies.

Empirical Requirements Analysis for Mars Surface Operations Using the Flashline Mars Arctic Research Station

NASA Technical Reports Server (NTRS)

Clancey, William J.; Lee, Pascal; Sierhuis, Maarten; Norvig, Peter (Technical Monitor)

2001-01-01

Living and working on Mars will require model-based computer systems for maintaining and controlling complex life support, communication, transportation, and power systems. This technology must work properly on the first three-year mission, augmenting human autonomy, without adding-yet more complexity to be diagnosed and repaired. One design method is to work with scientists in analog (mars-like) setting to understand how they prefer to work, what constrains will be imposed by the Mars environment, and how to ameliorate difficulties. We describe how we are using empirical requirements analysis to prototype model-based tools at a research station in the High Canadian Arctic.

One-way acoustic mirror based on anisotropic zero-index media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gu, Zhong-ming; Liang, Bin, E-mail: liangbin@nju.edu.cn, E-mail: jccheng@nju.edu.cn; Yang, Jing

2015-11-23

We have designed a one-way acoustic mirror comprising anisotropic zero-index media. For acoustic beam incident at a particular angle, the designed structure behaves like a high-efficient mirror that redirects almost all the incident energy into another direction predicted by the Snell's law, while becoming virtually transparent to beams propagating reversely along this output path. Furthermore, the mirror can be tailored to work at arbitrary incident angle by simply adjusting its geometry. Our design, with undirectional reflection functionality and flexible working angle, may offer possibilities in space isolations and have deep implication in various scenarios like ultrasound imaging or noise control.

[Comparison of two algorithms for development of design space-overlapping method and probability-based method].

PubMed

Shao, Jing-Yuan; Qu, Hai-Bin; Gong, Xing-Chu

2018-05-01

In this work, two algorithms (overlapping method and the probability-based method) for design space calculation were compared by using the data collected from extraction process of Codonopsis Radix as an example. In the probability-based method, experimental error was simulated to calculate the probability of reaching the standard. The effects of several parameters on the calculated design space were studied, including simulation number, step length, and the acceptable probability threshold. For the extraction process of Codonopsis Radix, 10 000 times of simulation and 0.02 for the calculation step length can lead to a satisfactory design space. In general, the overlapping method is easy to understand, and can be realized by several kinds of commercial software without coding programs, but the reliability of the process evaluation indexes when operating in the design space is not indicated. Probability-based method is complex in calculation, but can provide the reliability to ensure that the process indexes can reach the standard within the acceptable probability threshold. In addition, there is no probability mutation in the edge of design space by probability-based method. Therefore, probability-based method is recommended for design space calculation. Copyright© by the Chinese Pharmaceutical Association.

Optical engineering capstone design projects with industry sponsors

NASA Astrophysics Data System (ADS)

Bunch, Robert M.; Leisher, Paul O.; Granieri, Sergio C.

2014-09-01

Capstone senior design is the culmination of a student's undergraduate engineering education that prepares them for engineering practice. In fact, any engineering degree program that pursues accreditation by the Engineering Accreditation Commission of ABET must contain "a major design experience based on the knowledge and skills acquired in earlier course work and incorporating appropriate engineering standards and multiple realistic constraints." At Rose-Hulman, we offer an interdisciplinary Optical Engineering / Engineering Physics senior design curriculum that meets this requirement. Part of this curriculum is a two-course sequence where students work in teams on a design project leading to a functional prototype. The students begin work on their capstone project during the first week of their senior year. The courses are deliverable-driven and the students are held accountable for regular technical progress through weekly updates with their faculty advisor and mid-term design reviews. We have found that client-sponsored projects offer students an enriched engineering design experience as it ensures consideration of constraints and standards requirements similar to those that they will encounter as working engineers. Further, client-sponsored projects provide teams with an opportunity for regular customer interactions which help shape the product design. The process that we follow in both soliciting and helping to scope appropriate industry-related design projects will be described. In addition, an outline of the capstone course structure as well as methods used to hold teams accountable for technical milestones will be discussed. Illustrative examples of past projects will be provided.

Catalytic production of biofuels (butene oligomers) and biochemicals (tetrahydrofurfuryl alcohol) from corn stover.

PubMed

Byun, Jaewon; Han, Jeehoon

2016-07-01

A strategy is presented that produces liquid hydrocarbon fuels (butene oligomers (BO)) from cellulose (C6) fraction and commodity chemicals (tetrahydrofurfuryl alcohol (THFA)) from hemicellulose (C5) of corn stover based on catalytic conversion technologies using 2-sec-butylphenol (SBP) solvents. This strategy integrates the conversion subsystems based on experimental studies and separation subsystems for recovery of biomass derivatives and SBP solvents. Moreover, a heat exchanger network is designed to reduce total heating requirements to the lowest level, which is satisfied from combustion of biomass residues (lignin and humins). Based on the strategy, this work offers two possible process designs (design A: generating electricity internally vs. design B: purchasing electricity externally), and performs an economic feasibility study for both the designs based on a comparison of the minimum selling price (MSP) of THFA. This strategy with the design B leads to a better MSP of $1.93 per kg THFA. Copyright © 2016 Elsevier Ltd. All rights reserved.

Design and simulation of Macro-Fiber composite based serrated microflap for wind turbine blade fatigue load reduction

NASA Astrophysics Data System (ADS)

Sun, Xiao; Dai, Qingli; Bilgen, Onur

2018-05-01

A Macro-Fiber Composite (MFC) based active serrated microflap is designed in this research for wind turbine blades. Its fatigue load reduction potential is evaluated in normal operating conditions. The force and displacement output of the MFC-based actuator are simulated using a bimorph beam model. The work done by the aerodynamic, centripetal and gravitational forces acting on the microflap were calculated to determine the required capacity of the MFC-based actuator. MFC-based actuators with a lever mechanical linkage are designed to achieve the required force and displacement to activate the microflap. A feedback control scheme is designed to control the microflap during operation. Through an aerodynamic-aeroelastic time marching simulation with the designed control scheme, the time responses of the wind turbine blades are obtained. The fatigue analysis shows that the serrated microflap can reduce the standard deviation of the blade root flapwise bending moment and the fatigue damage equivalent loads.

Specification for Visual Requirements of Work-Centered Software Systems

DTIC Science & Technology

2006-10-01

no person shall be subject to any penity for fallng to comply wih a collection of N ilo ration it does not display a currenty valid OMB control...work- aiding systems. Based on the design concept for a work- centered support system (WCSS), these software systems support user tasks and goals...through both direct and indirect aiding methods within the interface client. In order to ensure the coherent development and delivery of work- centered

Shape Memory Alloy Actuator Design: CASMART Collaborative Best Practices

NASA Technical Reports Server (NTRS)

Benafan, Othmane; Brown, Jeff; Calkins, F. Tad; Kumar, Parikshith; Stebner, Aaron; Turner, Travis; Vaidyanathan, Raj; Webster, John; Young, Marcus L.

2011-01-01

Upon examination of shape memory alloy (SMA) actuation designs, there are many considerations and methodologies that are common to them all. A goal of CASMART's design working group is to compile the collective experiences of CASMART's member organizations into a single medium that engineers can then use to make the best decisions regarding SMA system design. In this paper, a review of recent work toward this goal is presented, spanning a wide range of design aspects including evaluation, properties, testing, modeling, alloy selection, fabrication, actuator processing, design optimization, controls, and system integration. We have documented each aspect, based on our collective experiences, so that the design engineer may access the tools and information needed to successfully design and develop SMA systems. Through comparison of several case studies, it is shown that there is not an obvious single, linear route a designer can adopt to navigate the path of concept to product. SMA engineering aspects will have different priorities and emphasis for different applications.

Derivation of energy-based base shear force coefficient considering hysteretic behavior and P-delta effects

NASA Astrophysics Data System (ADS)

Ucar, Taner; Merter, Onur

2018-01-01

A modified energy-balance equation accounting for P-delta effects and hysteretic behavior of reinforced concrete members is derived. Reduced hysteretic properties of structural components due to combined stiffness and strength degradation and pinching effects, and hysteretic damping are taken into account in a simple manner by utilizing plastic energy and seismic input energy modification factors. Having a pre-selected yield mechanism, energy balance of structure in inelastic range is considered. P-delta effects are included in derived equation by adding the external work of gravity loads to the work of equivalent inertia forces and equating the total external work to the modified plastic energy. Earthquake energy input to multi degree of freedom (MDOF) system is approximated by using the modal energy-decomposition. Energy-based base shear coefficients are verified by means of both pushover analysis and nonlinear time history (NLTH) analysis of several RC frames having different number of stories. NLTH analyses of frames are performed by using the time histories of ten scaled ground motions compatible with elastic design acceleration spectrum and fulfilling duration/amplitude related requirements of Turkish Seismic Design Code. The observed correlation between energy-based base shear force coefficients and the average base shear force coefficients of NLTH analyses provides a reasonable confidence in estimation of nonlinear base shear force capacity of frames by using the derived equation.

Assessment of the Use of Nanofluids in Spacecraft Active Thermal Control Systems

NASA Technical Reports Server (NTRS)

Ungar, Eugene K.; Erickson, Lisa R.

2011-01-01

The addition of metallic nanoparticles to a base heat transfer fluid can dramatically increase its thermal conductivity. These nanofluids have been shown to have advantages in some heat transport systems. Their enhanced properties can allow lower system volumetric flow rates and can reduce the required pumping power. Nanofluids have been suggested for use as working fluids for spacecraft Active Thermal Control Systems (ATCSs). However, there are no studies showing the end-to-end effect of nanofluids on the design and performance of spacecraft ATCSs. In the present work, a parametric study is performed to assess the use of nanofluids in a spacecraft ATCSs. The design parameters of the current Orion capsule and the tabulated thermophysical properties of nanofluids are used to assess the possible benefits of nanofluids and how their incorporation affects the overall design of a spacecraft ATCS. The study shows that the unique system and component-level design parameters of spacecraft ATCSs render them best suited for pure working fluids. The addition of nanoparticles to typical spacecraft thermal control working fluids actually results in an increase in the system mass and required pumping power.

Mixed-Reality Prototypes to Support Early Creative Design

NASA Astrophysics Data System (ADS)

Safin, Stéphane; Delfosse, Vincent; Leclercq, Pierre

The domain we address is creative design, mainly architecture. Rooted in a multidisciplinary approach as well as a deep understanding of architecture and design, our method aims at proposing adapted mixed-reality solutions to support two crucial activities: sketch-based preliminary design and distant synchronous collaboration in design. This chapter provides a summary of our work on a mixed-reality device, based on a drawing table (the Virtual Desktop), designed specifically to address real-life/business-focused issues. We explain our methodology, describe the two supported activities and the related users’ needs, detail the technological solution we have developed, and present the main results of multiple evaluation sessions. We conclude with a discussion of the usefulness of a profession-centered methodology and the relevance of mixed reality to support creative design activities.

Adjoint-Based Algorithms for Adaptation and Design Optimizations on Unstructured Grids

NASA Technical Reports Server (NTRS)

Nielsen, Eric J.

2006-01-01

Schemes based on discrete adjoint algorithms present several exciting opportunities for significantly advancing the current state of the art in computational fluid dynamics. Such methods provide an extremely efficient means for obtaining discretely consistent sensitivity information for hundreds of design variables, opening the door to rigorous, automated design optimization of complex aerospace configuration using the Navier-Stokes equation. Moreover, the discrete adjoint formulation provides a mathematically rigorous foundation for mesh adaptation and systematic reduction of spatial discretization error. Error estimates are also an inherent by-product of an adjoint-based approach, valuable information that is virtually non-existent in today's large-scale CFD simulations. An overview of the adjoint-based algorithm work at NASA Langley Research Center is presented, with examples demonstrating the potential impact on complex computational problems related to design optimization as well as mesh adaptation.

Implementing Project Based Learning in Computer Classroom

ERIC Educational Resources Information Center

Asan, Askin; Haliloglu, Zeynep

2005-01-01

Project-based learning offers the opportunity to apply theoretical and practical knowledge, and to develop the student's group working, and collaboration skills. In this paper we presented a design of effective computer class that implements the well-known and highly accepted project-based learning paradigm. A pre-test/post-test control group…

Engineering Laboratory Instruction in Virtual Environment--"eLIVE"

ERIC Educational Resources Information Center

Chaturvedi, Sushil; Prabhakaran, Ramamurthy; Yoon, Jaewan; Abdel-Salam, Tarek

2011-01-01

A novel application of web-based virtual laboratories to prepare students for physical experiments is explored in some detail. The pedagogy of supplementing physical laboratory with web-based virtual laboratories is implemented by developing a web-based tool, designated in this work as "eLIVE", an acronym for Engineering Laboratory…

Active Learning and Reflection in Product Development Engineering Education

ERIC Educational Resources Information Center

Shekar, Aruna

2007-01-01

Traditional engineering courses at tertiary level have been traditionally theory-based, supported by laboratory work, but there is now a world-wide trend towards project-based learning. In product development education, project-based learning is essential in order to integrate the disciplines of design, marketing and manufacturing towards the…

Standards Based Reform. Abbott Implementation Resource Guide

ERIC Educational Resources Information Center

Passantino, Claire; Kenyon, Susan

2004-01-01

The goal of this guide is to provide information, support and practical tools that may help educators design, implement, and evaluate their school's standards-based education program. In order to work, a comprehensive, standards-based educational program must, by definition, be the organizing structure upon which the school program operates.…

Competency-Based Education: A New Architecture for K-12 Schooling

ERIC Educational Resources Information Center

Colby, Rose L.

2017-01-01

"Competency-Based Education" introduces educators to a new model for anytime, anywhere schooling and provides tools and curriculum resources for redesigning the traditional structures of K-12 schools. Based on pioneering work across multiple states, the book shows how educators can design central elements of competency-based…

User-centric design of a personal assistance robot (FRASIER) for active aging.

PubMed

Padir, Taşkin; Skorinko, Jeanine; Dimitrov, Velin

2015-01-01

We present our preliminary results from the design process for developing the Worcester Polytechnic Institute's personal assistance robot, FRASIER, as an intelligent service robot for enabling active aging. The robot capabilities include vision-based object detection, tracking the user and help with carrying heavy items such as grocery bags or cafeteria trays. This work-in-progress report outlines our motivation and approach to developing the next generation of service robots for the elderly. Our main contribution in this paper is the development of a set of specifications based on the adopted user-centered design process, and realization of the prototype system designed to meet these specifications.

Design of a superconducting 28 GHz ion source magnet for FRIB using a shell-based support structure

DOE PAGES

Felice, H.; Rochepault, E.; Hafalia, R.; ...

2014-12-05

The Superconducting Magnet Program at the Lawrence Berkeley National Laboratory (LBNL) is completing the design of a 28 GHz NbTi ion source magnet for the Facility for Rare Isotope Beams (FRIB). The design parameters are based on the parameters of the ECR ion source VENUS in operation at LBNL since 2002 featuring a sextupole-in-solenoids configuration. Whereas most of the magnet components (such as conductor, magnetic design, protection scheme) remain very similar to the VENUS magnet components, the support structure of the FRIB ion source uses a different concept. A shell-based support structure using bladders and keys is implemented in themore » design allowing fine tuning of the sextupole preload and reversibility of the magnet assembly process. As part of the design work, conductor insulation scheme, coil fabrication processes and assembly procedures are also explored to optimize performance. We present the main features of the design emphasizing the integrated design approach used at LBNL to achieve this result.« less

Selling sex in unsafe spaces: sex work risk environments in Phnom Penh, Cambodia

PubMed Central

2011-01-01

Background The risk environment framework provides a valuable but under-utilised heuristic for understanding environmental vulnerability to HIV and other sexually transmitted infections among female sex workers. Brothels have been shown to be safer than street-based sex work, with higher rates of consistent condom use and lower HIV prevalence. While entertainment venues are also assumed to be safer than street-based sex work, few studies have examined environmental influences on vulnerability to HIV in this context. Methods As part of the Young Women's Health Study, a prospective observational study of young women (15-29 years) engaged in sex work in Phnom Penh, we conducted in-depth interviews (n = 33) to explore vulnerability to HIV/STI and related harms. Interviews were conducted in Khmer by trained interviewers, transcribed and translated into English and analysed for thematic content. Results The intensification of anti-prostitution and anti-trafficking efforts in Cambodia has increased the number of women working in entertainment venues and on the street. Our results confirm that street-based sex work places women at risk of HIV/STI infection and identify significant environmental risks related to entertainment-based sex work, including limited access to condoms and alcohol-related intoxication. Our data also indicate that exposure to violence and interactions with the police are mediated by the settings in which sex is sold. In particular, transacting sex in environments such as guest houses where there is little or no oversight in the form of peer or managerial support or protection, may increase vulnerability to HIV/STI. Conclusions Entertainment venues may also provide a high risk environment for sex work. Our results indicate that strategies designed to address HIV prevention among brothel-based FSWs in Cambodia have not translated well to street and entertainment-based sex work venues in which increasing numbers of women are working. There is an urgent need for targeted interventions, supported by legal and policy reforms, designed to reduce the environmental risks of sex work in these settings. Future research should seek to investigate sex work venues as risk environments, explore the role of different business models in mediating these environments, and identify and quantify exposure to risk in different occupational settings. PMID:22099449

Group Work in a Technology-Rich Environment

ERIC Educational Resources Information Center

Penner, Nikolai; Schulze, Mathias

2010-01-01

This paper addresses several components of successful language-learning methodologies--group work, task-based instruction, and wireless computer technologies--and examines how the interplay of these three was perceived by students in a second-year university foreign-language course. The technology component of our learning design plays a central…

Odyssey Reading. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2012

2012-01-01

"Odyssey Reading," published by CompassLearning[R], is a web-based K-12 reading/language arts program designed to allow for instructional differentiation and data-driven decision making. The online program includes electronic curricula and materials for individual or small-group work, assessments aligned with state curriculum standards,…

A Project-Based Model for Professional Environmental Experience

ERIC Educational Resources Information Center

Meehan, Barry; Thomas, Ian

2006-01-01

The projects described in this article were designed to provide a real world situation akin to the work of environmental professionals. The projects were conducted with Australian students working on environmental issues in Vietnam. The projects demonstrated that multi-disciplinary teamwork fits well into environmental projects, and importantly…

Status of development of the power plants on the base of MCFC in TFNC-VNIIEF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Novitski, E.Z.; Savkin, G.G.

1996-04-01

VNIIF started work on Molten Carbonate Fuel cells and power plants in 1991. Some results of VNIIF work in the direction of Autonomous Power Engineering are presented. Topics include molten carbonate fuel cell components, separator plates, manufacturing and testing, design, and goals.

Improving Student Teamwork in a Collaborative Project-Based Course

ERIC Educational Resources Information Center

Kapp, Edward

2009-01-01

While collaborative student projects can be effective in improving student learning, the failure of students to work together effectively remains a widely reported problem in collaborative learning. This article describes a team-building intervention designed to improve the students' abilities to work together in teams successfully. The…

Relationship between Workplace Spatial Settings and Occupant-Perceived Support for Collaboration

ERIC Educational Resources Information Center

Hua, Ying; Loftness, Vivian; Heerwagen, Judith H.; Powell, Kevin M.

2011-01-01

The increasingly collaborative nature of knowledge-based work requires workplaces to support both dynamic interactions and concentrated work, both of which are critical for collaboration performance. Given the prevalence of open-plan settings, this requirement has created new challenges for workplace design. Therefore, an understanding of the…

Research-Based Design of Pedagogical Agent Roles: A Review, Progress, and Recommendations

ERIC Educational Resources Information Center

Kim, Yanghee; Baylor, Amy L.

2016-01-01

In this paper we review the contribution of our original work titled "Simulating Instructional Roles Through Pedagogical Agents" published in the "International Journal of Artificial Intelligence and Education" (Baylor and Kim in "Computers and Human Behavior," 25(2), 450-457, 2005). Our original work operationalized…

Happy@Work: protocol for a web-based randomized controlled trial to improve mental well-being among an Asian working population

PubMed Central

2014-01-01

Background Mental health issues pose a serious concern in the workplace for the huge productivity loss and financial burden associated with it. Unlike the traditional ‘fixing-what-is-wrong’ approach, positive psychology offers a less-stigmatized way to promote mental health. Psychological capital, a concept originated from positive psychology, has been proven effective in improving mental well-being and work performance. However, little evidence exists for its implementation among Asian working population or its cost-benefit for organizations adopting such promotion strategy. The current study is designed to assess the protective effects of a web-based psychology capital intervention among Hong Kong working population on individuals’ mental health and work performance, as well as organizations’ return-on-investment. Methods/Design A two-arm randomized controlled trial design will be adopted. Eligible working adults will be randomly allocated to either the intervention group or the waiting-list control group, with 177 participants in each arm. The intervention, which consists of four web-based training sessions, each targeting one of the psychological capital components (hope, efficacy, optimism and resilience), will be implemented over a 4-week period. On-line surveys will assess the participants in each group at baseline, intervention completion, 1 and 3 months after the completion. The primary outcome is individuals’ psychological capital level; secondary outcomes include individuals’ well-being, depressive symptoms, work engagement and productivity. Return-on-investment will be calculated from the employers’ perspective based on productivity gain, savings in medical expenditure, as well as operation and time costs. Analysis will follow the intention-to-treat principle. Discussion This is the first experimental study that explores the applicability of psychological capital development among Asian population. Through investigating changes in individuals’ work productivity from absenteeism and presenteeism, this will be one of the few studies that quantify productivity gains from any type of mental health promotion. By demonstrating effectiveness in improving mental well-being and a positive return-on-investment rate, the study may help convince more uptake of similar positive psychology interventions at workplace in Asia and elsewhere. Trail Registration Number (assigned by Centre for Clinical Trials, Clinical Trials Registry, The Chinese University of Hong Kong): CUHK_CCT00396. Registration Date: 2014/02/13 PMID:24997007

Unmanned Sea Surface Vehicle (USSV) Motion Data and Refueling Equipment Design

DTIC Science & Technology

2010-01-01

knowledge of on-coming waves and craft controls system elements. The same information could be used to optimize structural design of USSV hull or host...Carderock Division, Detachment Norfolk Code 232- Systems Design &Integration Little Creek Amphibious Base 2600 Tarawa Court, Norfolk, VA. 23521-3239...and USSV speed. The resulting extensive set of motion and positional data will be useful for future system designers for years to come. This work

New Vistas in Chemical Product and Process Design.

PubMed

Zhang, Lei; Babi, Deenesh K; Gani, Rafiqul

2016-06-07

Design of chemicals-based products is broadly classified into those that are process centered and those that are product centered. In this article, the designs of both classes of products are reviewed from a process systems point of view; developments related to the design of the chemical product, its corresponding process, and its integration are highlighted. Although significant advances have been made in the development of systematic model-based techniques for process design (also for optimization, operation, and control), much work is needed to reach the same level for product design. Timeline diagrams illustrating key contributions in product design, process design, and integrated product-process design are presented. The search for novel, innovative, and sustainable solutions must be matched by consideration of issues related to the multidisciplinary nature of problems, the lack of data needed for model development, solution strategies that incorporate multiscale options, and reliability versus predictive power. The need for an integrated model-experiment-based design approach is discussed together with benefits of employing a systematic computer-aided framework with built-in design templates.

Web based listing of agents associated with new onset work-related asthma.

PubMed

Rosenman, K D; Beckett, W S

2015-05-01

Work-related asthma is common and yet remains a challenge to diagnose. Access to a listing of agents associated with work-related asthma has been suggested as useful in assisting in the diagnosis. The Association of Occupational and Environmental Clinics (AOEC) developed criteria that were used to review the peer-reviewed medical literature published in English. Based on this review, substances were designated either as a sensitizing agent or an irritant. The reviews were conducted by a board certified internist/pulmonologist/occupational medicine specialist from 2002 to 2007 and a board certified internist/occupational medicine physician from 2008- date. All reviews were then reviewed by the nine member AOEC board of directors. The original list of agents associated with new onset work-related asthma was derived from the tables of a text book on work-related asthma. After 13 years of review, there are 327 substances designated as asthma agents on the AOEC list; 173 (52.9%) coded as sensitizers, 35 (10.7%) as generally recognized as an asthma causing agent, four (1.2%) as irritants, two (0.6%) as both a sensitizer and an irritant and 113(34.6%) agents that still need to be reviewed. The AOEC has developed a readily available web based listing of agents associated with new onset work-related asthma in adults. The listing is based on peer-reviewed criteria. The listing is updated twice a year. Regular review of the peer-reviewed medical literature is conducted to determine whether new substances should be added to the list. Clinicians should find the list useful when considering the diagnosis of work-related asthma. Copyright © 2015 Elsevier Ltd. All rights reserved.

Beam-Flattener Design for High Energy Radiographic Inspection

NASA Technical Reports Server (NTRS)

Grandin, Robert; Rudolphi, Thomas

2009-01-01

This report documents the work done to develop a beam flattener for use in the inspection of rocket motors at ATK Space Systems Utah facilities. The following pages provide a brief introduction to the necessity of this project, comprehensive description of the design methodology, and experimentally-based conclusions regarding project success.

Accelerated Reader. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2009

2009-01-01

"Accelerated Reader" is a computer-based reading management system designed to complement an existing classroom literacy program for grades pre-K-12. It is designed to increase the amount of time students spend reading independently. Students choose reading-level appropriate books or short stories for which Accelerated Reader tests are…

Factors Affecting the Acceptability of Microforms as a Reading Medium.

ERIC Educational Resources Information Center

Spencer, Herbert; Reynolds, Linda

Based on visits to representative microform users and an extensive survey of relevant literature, a study was undertaken to assess the relative importance of factors affecting the acceptability of microforms as reading mediums. The following variables were considered: (1) microform characteristics; (2) equipment design; (3) work station design;…

Adaptation by Design: A Context-Sensitive, Dialogic Approach to Interventions

ERIC Educational Resources Information Center

Kirshner, Ben; Polman, Joseph L.

2013-01-01

Applied researchers, whether working with the framework of design-based research or intervention science, face a similar implementation challenge: practitioners who enact their programs typically do so in varied, context-specific ways. Although this variability is often seen as a problem for those who privilege fidelity and standardization, we…

Ah-choo! Increased Risk of Pollen Allergies in the Northern Hemisphere

ERIC Educational Resources Information Center

Constible, Juanita; Sandro, Luke

2008-01-01

In this problem-based learning activity designed for nonscience majors, students assume the roles of scientists working for a public relations firm. Teams of students design communication products illustrating links between climate change and pollen allergies. Students develop a variety of process skills critical to scientists, including working…

Community-Based Prevention Specialist. Trainer Manual.

ERIC Educational Resources Information Center

University Research Corp., Bethesda, MD.

This trainer manual is designed to assist facilitators in the design of entry-level courses and programs for substance abuse prevention specialists. The manual initially concentrates on a basic, generic approach to community work, and introduces the knowledge and skills needed to implement substance abuse prevention programs by using the community…

Logos, Ethos, Pathos, and Ecos: Neighborhood Housing Design Research and Development

ERIC Educational Resources Information Center

Abell, John H.

2010-01-01

This article presents an overview of a community-based teaching and learning project linking sustainability, working family housing, neighborhood social capital, and urban design research and development. The article foregrounds principles and protocols that can be used to measure community effectiveness and it highlights a basis for further…

Revisiting Your Outdoor Environment: Reasons to Reshape, Enrich, Redevelop the Outdoor Space.

ERIC Educational Resources Information Center

Mauffette, Anne Gillain

1998-01-01

Provides suggestions for designing effective outdoor space. Focuses on advocating for space, designing spaces based on children's characteristics and preferences, integrating the outdoors in educational planning, including children in decision making and work, knowing about injury prevention, providing adult models who love the outdoors, and…

[The design and implementation of DICOM self-help film printing system].

PubMed

Wang, Xiaodong; Jiang, Mowen

2013-09-01

This article focuses on the design and implementation of self-help film printing system which based on DICOM standard. According to DICOM standard and the working process of the radiology department, the system realizes self-help printing film as well as monitoring and managing the film printing business.

Emerging Models of the New Paradigm.

ERIC Educational Resources Information Center

Howser, Lee; Schwinn, Carole

Working with the Philadelphia-based Institute of Interactive Management, several teams at Jackson Community College (JCC), in Michigan, set out in 1994 to learn and apply an interactive design methodology to selected college subsystems. Interactive design begins with understanding problems faced by the system as a whole, which in the case of JCC…

Shadows, An Environmental Investigation.

ERIC Educational Resources Information Center

National Wildlife Federation, Washington, DC.

This environmental unit is one of a series designed for integration within an existing curriculum. The units are self-contained and require minimal teacher preparation. The philosophy behind the units is based on an experience-oriented process that encourages self-paced independent work. This unit on shadows is designed for all elementary levels,…

Designing ee-Learning Environments: Lessons from an Online Workshop

ERIC Educational Resources Information Center

Godwin, Lindsey; Kaplan, Soren

2008-01-01

Based on their work leading three experiential, online workshops with over 180 participants from around the world, Lindsey Godwin and Soren Kaplan share reflections on designing and conducting successful ee-learning courses. The workshops sought to translate a popular face-to-face seminar in appreciative inquiry, an increasingly popular…

Instructional Design and Professional Informal Learning: Practices, Tensions, and Ironies

ERIC Educational Resources Information Center

Yanchar, Stephen C.; Hawkley, Melissa N.

2015-01-01

This qualitative study explored the nature of informal learning in professional instructional designers' everyday work activities. Based on intensive interviews with six full-time practitioners, and using a hermeneutic form of data analysis, this study produced seven themes concerning the practices, tensions, and ironies associated with this…

The Math Master Level 2. Ages 6-8.

ERIC Educational Resources Information Center

Levy, Barbara W.

This booklet, designed for ages 6-8, is the second in a series designed to help teachers develop a more positive and creative approach to giving work on mathematics skills to children. It is based on objectives concerning creativity, fostering independent thinking, using experiences, using mastery, reinforcing previously learned skills,…

The Math Master Level 4. Ages 10-12.

ERIC Educational Resources Information Center

Levy, Barbara W.

This booklet, designed for ages 10-12, is the fourth in a series designed to help teachers develop a more positive and creative approach to giving work on mathematics skills to children. It is based on objectives concerning creativity, fostering independent thinking, using experiences, using mastery, reinforcing previously learned skills,…

The Math Master Level 1. Preschool-Age 6.

ERIC Educational Resources Information Center

Levy, Barbara W.

This booklet, designed for preschool through age 6, is the first in a series designed to help teachers develop a more positive and creative approach to giving work on mathematics skills to children. It is based on objectives concerning creativity, fostering independent thinking, using experiences, using mastery, reinforcing previously learned…

The Math Master Level 3. Ages 8-10.

ERIC Educational Resources Information Center

Levy, Barbara W.

This booklet, designed for ages 8-10, is the third in a series designed to help teachers develop a more positive and creative approach to giving work on mathematics skills to children. It is based on objectives concerning creativity, fostering independent thinking, using experiences, using mastery, reinforcing previously learned skills,…

Developing Engineering and Science Process Skills Using Design Software in an Elementary Education

NASA Astrophysics Data System (ADS)

Fusco, Christopher

This paper examines the development of process skills through an engineering design approach to instruction in an elementary lesson that combines Science, Technology, Engineering, and Math (STEM). The study took place with 25 fifth graders in a public, suburban school district. Students worked in groups of five to design and construct model bridges based on research involving bridge building design software. The assessment was framed around individual student success as well as overall group processing skills. These skills were assessed through an engineering design packet rubric (student work), student surveys of learning gains, observation field notes, and pre- and post-assessment data. The results indicate that students can successfully utilize design software to inform constructions of model bridges, develop science process skills through problem based learning, and understand academic concepts through a design project. The final result of this study shows that design engineering is effective for developing cooperative learning skills. The study suggests that an engineering program offered as an elective or as part of the mandatory curriculum could be beneficial for developing students' critical thinking, inter- and intra-personal skills, along with an increased their understanding and awareness for scientific phenomena. In conclusion, combining a design approach to instruction with STEM can increase efficiency in these areas, generate meaningful learning, and influence student attitudes throughout their education.

A knowledge-based tool for multilevel decomposition of a complex design problem

NASA Technical Reports Server (NTRS)

Rogers, James L.

1989-01-01

Although much work has been done in applying artificial intelligence (AI) tools and techniques to problems in different engineering disciplines, only recently has the application of these tools begun to spread to the decomposition of complex design problems. A new tool based on AI techniques has been developed to implement a decomposition scheme suitable for multilevel optimization and display of data in an N x N matrix format.

Sub-Nanoliter Spectroscopic Gas Sensor

PubMed Central

Alfeeli, Bassam; Pickrell, Gary; Wang, Anbo

2006-01-01

In this work, a new type of optical fiber based chemical sensor, the sub-nanoliter sample cell (SNSC) based gas sensor, is described and compared to existing sensors designs in the literature. This novel SNSC gas sensor is shown to have the capability of gas detection with a cell volume in the sub-nanoliter range. Experimental results for various configurations of the sensor design are presented which demonstrate the capabilities of the miniature gas sensor.

An Investigation of GeoBase Mission Data Set Design, Implementation, and Usage Within Air Force Civil Engineer Electrical and Utilities Work Centers

DTIC Science & Technology

2005-03-01

ethnography , grounded theory , phenomenological , case study , and content analysis. As ethnography is based upon a longitudinal study in...a qualitative methodology consisting of a case study strategy is warranted for this research project. Yin (2003) lists five components of research ...systems. Journal of End User Computing, 12(3), 14. Yin, R. K. (2003). Case Study Research : Design and

Modelling of robotic work cells using agent based-approach

NASA Astrophysics Data System (ADS)

Sękala, A.; Banaś, W.; Gwiazda, A.; Monica, Z.; Kost, G.; Hryniewicz, P.

2016-08-01

In the case of modern manufacturing systems the requirements, both according the scope and according characteristics of technical procedures are dynamically changing. This results in production system organization inability to keep up with changes in a market demand. Accordingly, there is a need for new design methods, characterized, on the one hand with a high efficiency and on the other with the adequate level of the generated organizational solutions. One of the tools that could be used for this purpose is the concept of agent systems. These systems are the tools of artificial intelligence. They allow assigning to agents the proper domains of procedures and knowledge so that they represent in a self-organizing system of an agent environment, components of a real system. The agent-based system for modelling robotic work cell should be designed taking into consideration many limitations considered with the characteristic of this production unit. It is possible to distinguish some grouped of structural components that constitute such a system. This confirms the structural complexity of a work cell as a specific production system. So it is necessary to develop agents depicting various aspects of the work cell structure. The main groups of agents that are used to model a robotic work cell should at least include next pattern representatives: machine tool agents, auxiliary equipment agents, robots agents, transport equipment agents, organizational agents as well as data and knowledge bases agents. In this way it is possible to create the holarchy of the agent-based system.

Interstellar Initiative Web Page Design

NASA Technical Reports Server (NTRS)

Mehta, Alkesh

1999-01-01

This summer at NASA/MSFC, I have contributed to two projects: Interstellar Initiative Web Page Design and Lenz's Law Relative Motion Demonstration. In the Web Design Project, I worked on an Outline. The Web Design Outline was developed to provide a foundation for a Hierarchy Tree Structure. The Outline would help design a Website information base for future and near-term missions. The Website would give in-depth information on Propulsion Systems and Interstellar Travel. The Lenz's Law Relative Motion Demonstrator is discussed in this volume by Russell Lee.

Category's analysis and operational project capacity method of transformation in design

NASA Astrophysics Data System (ADS)

Obednina, S. V.; Bystrova, T. Y.

2015-10-01

The method of transformation is attracting widespread interest in fields such contemporary design. However, in theory of design little attention has been paid to a categorical status of the term "transformation". This paper presents the conceptual analysis of transformation based on the theory of form employed in the influential essays by Aristotle and Thomas Aquinas. In the present work the transformation as a method of shaping design has been explored as well as potential application of this term in design has been demonstrated.

A Study of the Predictive Association between Congruency Measures Based on Work-Emotionality Theory and the Achievement and Satisfaction in Adult Instructional Groups.

ERIC Educational Resources Information Center

Lueder, E. J.

The rationale, design, and data collection methods of a study of factors that may influence the effectiveness of adult instructional groups that included interaction are discussed. Two aspects to be considered when studying instructional groups are called work and emotionality. The Work-Emotionality Theory is discussed. Six types of…

Knowledge-based environment for optical system design

NASA Astrophysics Data System (ADS)

Johnson, R. Barry

1991-01-01

Optical systems are extensively utilized by industry government and military organizations. The conceptual design engineering design fabrication and testing of these systems presently requires significant time typically on the order of 3-5 years. The Knowledge-Based Environment for Optical System Design (KB-OSD) Program has as its principal objectives the development of a methodology and tool(s) that will make a notable reduction in the development time of optical system projects reduce technical risk and overall cost. KB-OSD can be considered as a computer-based optical design associate for system engineers and design engineers. By utilizing artificial intelligence technology coupled with extensive design/evaluation computer application programs and knowledge bases the KB-OSD will provide the user with assistance and guidance to accomplish such activities as (i) develop system level and hardware level requirements from mission requirements (ii) formulate conceptual designs (iii) construct a statement of work for an RFP (iv) develop engineering level designs (v) evaluate an existing design and (vi) explore the sensitivity of a system to changing scenarios. The KB-OSD comprises a variety of computer platforms including a Stardent Titan supercomputer numerous design programs (lens design coating design thermal materials structural atmospherics etc. ) data bases and heuristic knowledge bases. An important element of the KB-OSD Program is the inclusion of the knowledge of individual experts in various areas of optics and optical system engineering. This knowledge is obtained by KB-OSD knowledge engineers performing

Disentangling the causal relationships between work-home interference and employee health.

PubMed

van Hooff, Madelon L M; Geurts, Sabine A E; Taris, Toon W; Kompier, Michiel A J; Dikkers, Josje S E; Houtman, Irene L D; van den Heuvel, Floor M M

2005-02-01

The present study was designed to investigate the causal relationships between (time- and strain-based) work-home interference and employee health. The effort-recovery theory provided the theoretical basis for this study. Two-phase longitudinal data (with a 1-year time lag) were gathered from 730 Dutch police officers to test the following hypotheses with structural equation modeling: (i) work-home interference predicts health deterioration, (ii) health complaints precede increased levels of such interference, and (iii) both processes operate. The relationship between stable and changed levels of work-home interference across time and their relationships with the course of health were tested with a group-by-time analysis of variance. Four subgroups were created that differed in starting point and the development of work-home interference across time. The normal causal model, in which strain-based (but not time-based) work-home interference was longitudinally related to increased health complaints 1 year later, fit the data well and significantly better than the reversed causal model. Although the reciprocal model also provided a good fit, it was less parsimonious than the normal causal model. In addition, both an increment in (strain-based) work-home interference across time and a long-lasting experience of high (strain-based) work-home interference were associated with a deterioration in health. It was concluded that (strain-based) work-home interference acts as a precursor of health impairment and that different patterns of (strain-based) work-home interference across time are related to different health courses. Particularly long-term experience of (strain-based) work-home interference seems responsible for an accumulation of health complaints.

Geometric metasurface enabling polarization independent beam splitting.

PubMed

Yoon, Gwanho; Lee, Dasol; Nam, Ki Tae; Rho, Junsuk

2018-06-21

A polarization independent holographic beam splitter that generates equal-intensity beams based on geometric metasurface is demonstrated. Although conventional geometric metasurfaces have the advantages of working over a broad frequency range and having intuitive design principles, geometric metasurfaces have the limitation that they only work for circular polarization. In this work, Fourier holography is used to overcome this limitation. A perfect overlap resulting from the origin-symmetry of the encoded image enables polarization independent operation of geometric metasurfaces. The designed metasurface beam splitter is experimentally demonstrated by using hydrogenated amorphous silicon, and the device performs consistent beam splitting regardless of incident polarizations as well as wavelengths. Our device can be applied to generate equal-intensity beams for entangled photon light sources in quantum optics, and the design approach provides a way to develop ultra-thin broadband polarization independent components for modern optics.

STS-42 Commander Grabe works with MWPE at IML-1 Rack 8 aboard OV-103

NASA Technical Reports Server (NTRS)

1992-01-01

STS-42 Commander Ronald J. Grabe works with the Mental Workload and Performance Evaluation Experiment (MWPE) (portable laptop computer, keyboard cursor keys, a two-axis joystick, and a track ball) at Rack 8 in the International Microgravity Laboratory 1 (IML-1) module. The test was designed as a result of difficulty experienced by crewmembers working at a computer station on a previous Space Shuttle mission. The problem was due to the workstation's design being based on Earth-bound conditions with the operator in a typical one-G standing position. For STS-42, the workstation was redesigned to evaluate the effects of microgravity on the ability of crewmembers to interact with a computer workstation. Information gained from this experiment will be used to design workstations for future Spacelab missions and Space Station Freedom (SSF).

Rotating shift work, sleep, and accidents related to sleepiness in hospital nurses

NASA Technical Reports Server (NTRS)

Gold, D. R.; Rogacz, S.; Bock, N.; Tosteson, T. D.; Baum, T. M.; Speizer, F. E.; Czeisler, C. A.

1992-01-01

A hospital-based survey on shift work, sleep, and accidents was carried out among 635 Massachusetts nurses. In comparison to nurses who worked only day/evening shifts, rotators had more sleep/wake cycle disruption and nodded off more at work. Rotators had twice the odds of nodding off while driving to or from work and twice the odds of a reported accident or error related to sleepiness. Application of circadian principles to the design of hospital work schedules may result in improved health and safety for nurses and patients.

Using Mobile App Development Tools to Build a GIS Application

NASA Astrophysics Data System (ADS)

Mital, A.; Catchen, M.; Mital, K.

2014-12-01

Our group designed and built working web, android, and IOS applications using different mapping libraries as bases on which to overlay fire data from NASA. The group originally planned to make app versions for Google Maps, Leaflet, and OpenLayers. However, because the Leaflet library did not properly load on Android, the group focused efforts on the other two mapping libraries. For Google Maps, the group first designed a UI for the web app and made a working version of the app. After updating the source of fire data to one which also provided historical fire data, the design had to be modified to include the extra data. After completing a working version of the web app, the group used webview in android, a built in resource which allowed porting the web app to android without rewriting the code for android. Upon completing this, the group found Apple IOS devices had a similar capability, and so decided to add an IOS app to the project using a function similar to webview. Alongside this effort, the group began implementing an OpenLayers fire map using a simpler UI. This web app was completed fairly quickly relative to Google Maps; however, it did not include functionality such as satellite imagery or searchable locations. The group finished the project with a working android version of the Google Maps based app supporting API levels 14-19 and an OpenLayers based app supporting API levels 8-19, as well as a Google Maps based IOS app supporting both old and new screen formats. This project was implemented by high school and college students under an SGT Inc. STEM internship program

Design of a MEMS-based retina scanning system for biometric authentication

NASA Astrophysics Data System (ADS)

Woittennek, Franziska; Knobbe, Jens; Pügner, Tino; Schelinski, Uwe; Grüger, Heinrich

2014-05-01

There is an increasing need for reliable authentication for a number of applications such as e commerce. Common authentication methods based on ownership (ID card) or knowledge factors (password, PIN) are often prone to manipulations and may therefore be not safe enough. Various inherence factor based methods like fingerprint, retinal pattern or voice identifications are considered more secure. Retina scanning in particular offers both low false rejection rate (FRR) and low false acceptance rate (FAR) with about one in a million. Images of the retina with its characteristic pattern of blood vessels can be made with either a fundus camera or laser scanning methods. The present work describes the optical design of a new compact retina laser scanner which is based on MEMS (Micro Electric Mechanical System) technology. The use of a dual axis micro scanning mirror for laser beam deflection enables a more compact and robust design compared to classical systems. The scanner exhibits a full field of view of 10° which corresponds to an area of 4 mm2 on the retinal surface surrounding the optical disc. The system works in the near infrared and is designed for use under ambient light conditions, which implies a pupil diameter of 1.5 mm. Furthermore it features a long eye relief of 30 mm so that it can be conveniently used by persons wearing glasses. The optical design requirements and the optical performance are discussed in terms of spot diagrams and ray fan plots.

Workflow Agents vs. Expert Systems: Problem Solving Methods in Work Systems Design

NASA Technical Reports Server (NTRS)

Clancey, William J.; Sierhuis, Maarten; Seah, Chin

2009-01-01

During the 1980s, a community of artificial intelligence researchers became interested in formalizing problem solving methods as part of an effort called "second generation expert systems" (2nd GES). How do the motivations and results of this research relate to building tools for the workplace today? We provide an historical review of how the theory of expertise has developed, a progress report on a tool for designing and implementing model-based automation (Brahms), and a concrete example how we apply 2nd GES concepts today in an agent-based system for space flight operations (OCAMS). Brahms incorporates an ontology for modeling work practices, what people are doing in the course of a day, characterized as "activities." OCAMS was developed using a simulation-to-implementation methodology, in which a prototype tool was embedded in a simulation of future work practices. OCAMS uses model-based methods to interactively plan its actions and keep track of the work to be done. The problem solving methods of practice are interactive, employing reasoning for and through action in the real world. Analogously, it is as if a medical expert system were charged not just with interpreting culture results, but actually interacting with a patient. Our perspective shifts from building a "problem solving" (expert) system to building an actor in the world. The reusable components in work system designs include entire "problem solvers" (e.g., a planning subsystem), interoperability frameworks, and workflow agents that use and revise models dynamically in a network of people and tools. Consequently, the research focus shifts so "problem solving methods" include ways of knowing that models do not fit the world, and ways of interacting with other agents and people to gain or verify information and (ultimately) adapt rules and procedures to resolve problematic situations.

Development of a mass sensitive quartz crystal microbalance (QCM)-based DNA biosensor using a 50 MHz electronic oscillator circuit.

PubMed

García-Martinez, Gonzalo; Bustabad, Enrique Alonso; Perrot, Hubert; Gabrielli, Claude; Bucur, Bogdan; Lazerges, Mathieu; Rose, Daniel; Rodriguez-Pardo, Loreto; Fariña, Jose; Compère, Chantal; Vives, Antonio Arnau

2011-01-01

This work deals with the design of a high sensitivity DNA sequence detector using a 50 MHz quartz crystal microbalance (QCM) electronic oscillator circuit. The oscillator circuitry is based on Miller topology, which is able to work in damping media. Calibration and experimental study of frequency noise are carried out, finding that the designed sensor has a resolution of 7.1 ng/cm(2) in dynamic conditions (with circulation of liquid). Then the oscillator is proved as DNA biosensor. Results show that the system is able to detect the presence of complementary target DNAs in a solution with high selectivity and sensitivity. DNA target concentrations higher of 50 ng/mL can be detected.

Space station systems analysis study. Part 2, volume 3: Appendixes, Book 2: Supporting data (7 through 18)

NASA Technical Reports Server (NTRS)

1977-01-01

Topics discussed include: (1) design considerations for a MARS sample return laboratory module for space station investigations; (2) crew productivity as a function of work shift arrangement; (3) preliminary analysis of the local logistics problem on the space construction base; (4) mission hardware construction operational flows and timelines; (5) orbit transfer vehicle concept definition; (6) summary of results and findings of space processing working review; (7) crew and habitability subsystem (option L); (8) habitability subsystem considerations for shuttle tended option L; (9) orbiter utilization in manned sortie missions; (10) considerations in definition of space construction base standard module configuration (option L); (11) guidance, control, and navigation subsystems; and (12) system and design tradeoffs.

Academic Radiologist Subspecialty Identification Using a Novel Claims-Based Classification System.

PubMed

Rosenkrantz, Andrew B; Wang, Wenyi; Hughes, Danny R; Ginocchio, Luke A; Rosman, David A; Duszak, Richard

2017-06-01

The objective of the present study is to assess the feasibility of a novel claims-based classification system for payer identification of academic radiologist subspecialties. Using a categorization scheme based on the Neiman Imaging Types of Service (NITOS) system, we mapped the Medicare Part B services billed by all radiologists from 2012 to 2014, assigning them to the following subspecialty categories: abdominal imaging, breast imaging, cardiothoracic imaging, musculoskeletal imaging, nuclear medicine, interventional radiology, and neuroradiology. The percentage of subspecialty work relative value units (RVUs) to total billed work RVUs was calculated for each radiologist nationwide. For radiologists at the top 20 academic departments funded by the National Institutes of Health, those percentages were compared with subspecialties designated on faculty websites. NITOS-based subspecialty assignments were also compared with the only radiologist subspecialty classifications currently recognized by Medicare (i.e., nuclear medicine and interventional radiology). Of 1012 academic radiologists studied, the median percentage of Medicare-billed NITOS-based subspecialty work RVUs matching the subspecialty designated on radiologists' own websites ranged from 71.3% (for nuclear medicine) to 98.9% (for neuroradiology). A NITOS-based work RVU threshold of 50% correctly classified 89.8% of radiologists (5.9% were not mapped to any subspecialty; subspecialty error rate, 4.2%). In contrast, existing Medicare provider codes identified only 46.7% of nuclear medicine physicians and 39.4% of interventional radiologists. Using a framework based on a recently established imaging health services research tool that maps service codes based on imaging modality and body region, Medicare claims data can be used to consistently identify academic radiologists by subspecialty in a manner not possible with the use of existing Medicare physician specialty identifiers. This method may facilitate more appropriate performance metrics for subspecialty academic physicians under emerging value-based payment models.

Comparing oncology clinical programs by use of innovative designs and expected net present value optimization: Which adaptive approach leads to the best result?

PubMed

Parke, Tom; Marchenko, Olga; Anisimov, Vladimir; Ivanova, Anastasia; Jennison, Christopher; Perevozskaya, Inna; Song, Guochen

2017-01-01

Designing an oncology clinical program is more challenging than designing a single study. The standard approaches have been proven to be not very successful during the last decade; the failure rate of Phase 2 and Phase 3 trials in oncology remains high. Improving a development strategy by applying innovative statistical methods is one of the major objectives of a drug development process. The oncology sub-team on Adaptive Program under the Drug Information Association Adaptive Design Scientific Working Group (DIA ADSWG) evaluated hypothetical oncology programs with two competing treatments and published the work in the Therapeutic Innovation and Regulatory Science journal in January 2014. Five oncology development programs based on different Phase 2 designs, including adaptive designs and a standard two parallel arm Phase 3 design were simulated and compared in terms of the probability of clinical program success and expected net present value (eNPV). In this article, we consider eight Phase2/Phase3 development programs based on selected combinations of five Phase 2 study designs and three Phase 3 study designs. We again used the probability of program success and eNPV to compare simulated programs. For the development strategies, we considered that the eNPV showed robust improvement for each successive strategy, with the highest being for a three-arm response adaptive randomization design in Phase 2 and a group sequential design with 5 analyses in Phase 3.

Introducing passive acoustic filter in acoustic based condition monitoring: Motor bike piston-bore fault identification

NASA Astrophysics Data System (ADS)

Jena, D. P.; Panigrahi, S. N.

2016-03-01

Requirement of designing a sophisticated digital band-pass filter in acoustic based condition monitoring has been eliminated by introducing a passive acoustic filter in the present work. So far, no one has attempted to explore the possibility of implementing passive acoustic filters in acoustic based condition monitoring as a pre-conditioner. In order to enhance the acoustic based condition monitoring, a passive acoustic band-pass filter has been designed and deployed. Towards achieving an efficient band-pass acoustic filter, a generalized design methodology has been proposed to design and optimize the desired acoustic filter using multiple filter components in series. An appropriate objective function has been identified for genetic algorithm (GA) based optimization technique with multiple design constraints. In addition, the sturdiness of the proposed method has been demonstrated in designing a band-pass filter by using an n-branch Quincke tube, a high pass filter and multiple Helmholtz resonators. The performance of the designed acoustic band-pass filter has been shown by investigating the piston-bore defect of a motor-bike using engine noise signature. On the introducing a passive acoustic filter in acoustic based condition monitoring reveals the enhancement in machine learning based fault identification practice significantly. This is also a first attempt of its own kind.

An Investigation of New Snow Water Equivalence Sensing Modalities

NASA Astrophysics Data System (ADS)

Frolik, J.; Skalka, C.; Wemple, B.

2008-12-01

It is well known that snowpack is highly variable and influenced by a range of factors, including topography and vegetation cover. As such, single point measurements may be viewed as being inadequate to characterize snowpack in a given area. Thus motivated by the desire for distributed sensing, this work presents results of a proof-of-concept investigation for new, low-cost, snow water equivalence (SWE) sensors based on the attenuation of microwave and gamma radiation. First, our work considers the attenuation of microwave signals at 2.4 GHz and 5 GHz due to an accumulating snowpack. These frequencies coincide with those used for common wireless networks and thus our proposed sensor can leverage existing hardware designs which are low-cost and power efficient. Second, we present attenuation data for radiation energy occurring between 500 keV and 1 MeV. These results were obtained utilizing a radiation detector based on Cadmium Zinc Telluride (CZT) technology. The proposed sensor will leverage recent investments such CZT based designs for homeland security applications. We contend that sensors based on these modalities will be low-cost and low-energy and thus readily integrated with wireless sensor network hardware for distributed monitoring. In addition, these sensors will be compact and thus can be placed in locations not feasible for current SWE sensor designs (e.g., snow pillows) or in locations too dangerous for snow course measurements (e.g., areas prone to avalanche). Since neither sensing methods requires contact with the snowpack, these modalities are also immune to snow bridging effects which plague existing designs. We also present preliminary findings of work conducted in a mountainous forested setting in northern New England which examines the influence of forest vegetation on snowpack.

Inclusive Smartphone Interface Design in Context: Co(Re)designing the PIS.

PubMed

Magee, Paul; Ward, Gillian; Moody, Louise; Roebuck, Annette

2017-01-01

User-context optimises smartphone interface-design. Neglect of user-context during development, delays or prevents marginalised-consumer benefit. Working with People with Learning Disability (PWLD) to develop interfaces refined by communication-need will improve User-Experience (UX). In research, a Participant Information Sheet (PIS) discloses planned study-activity. This paper explains co-creation of a PIS based on communication-need of PWLD.

Nanotechnology-Enabled Optical Molecular Imaging of Breast Cancer

DTIC Science & Technology

2008-07-01

explanation of results. 37 KEY RESEACH ACCOMPLISHMENTS • Design of needle-based fiber optic imaging system completed and development of first...policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting...our results to date. As described in the Statement of Work, Year 1 plans focused on design of this system and beginning initial construction. It

Shipyard Standards Program Development Guide

DTIC Science & Technology

1992-10-01

Given the opportunity, designers will use designs that have worked for them in the past . Unfortunately, not all designers have the same experience base...standards formally approved by shipyard management? The subject of labor productivity standards has received considerable attention during the past decade. A...research into this consideration during the past decade. References [23], [24], [25], [26], and [27] have reported beneficial results obtained by getting the

New Design and Improvement of Planetary Gear Trains

NASA Technical Reports Server (NTRS)

Handschuh, Robert (Technical Monitor); Litvin, Faydor L.; Fuentes, Alfonso; Vecchiato, Daniele; Gonzalez-Perez, Ignacio

2004-01-01

The development of new types of planetary and planetary face-gear drives is proposed. The new designs are based on regulating backlash between the gears and modifying the tooth surfaces to improve the design. The goal of this work is to obtain a nearly uniform distribution of load between the planet gears. In addition, a new type of planetary face-gear drive was developed in this project.

Modelling elderly cardiac patients decision making using Cognitive Work Analysis: identifying requirements for patient decision aids.

PubMed

Dhukaram, Anandhi Vivekanandan; Baber, Chris

2015-06-01

Patients make various healthcare decisions on a daily basis. Such day-to-day decision making can have significant consequences on their own health, treatment, care, and costs. While decision aids (DAs) provide effective support in enhancing patient's decision making, to date there have been few studies examining patient's decision making process or exploring how the understanding of such decision processes can aid in extracting requirements for the design of DAs. This paper applies Cognitive Work Analysis (CWA) to analyse patient's decision making in order to inform requirements for supporting self-care decision making. This study uses focus groups to elicit information from elderly cardiovascular disease (CVD) patients concerning a range of decision situations they face on a daily basis. Specifically, the focus groups addressed issues related to the decision making of CVD in terms of medication compliance, pain, diet and exercise. The results of these focus groups are used to develop high level views using CWA. CWA framework decomposes the complex decision making problem to inform three approaches to DA design: one design based on high level requirements; one based on a normative model of decision-making for patients; and the third based on a range of heuristics that patients seem to use. CWA helps in extracting and synthesising decision making from different perspectives: decision processes, work organisation, patient competencies and strategies used in decision making. As decision making can be influenced by human behaviour like skills, rules and knowledge, it is argued that patients require support to different types of decision making. This paper also provides insights for designers in using CWA framework for the design of effective DAs to support patients in self-management. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Developing the multiple stress-strain creep recovery (MS-SCR) test

NASA Astrophysics Data System (ADS)

Elnasri, Mahmoud; Airey, Gordon; Thom, Nick

2018-04-01

While most published work from Europe has been concerned with evaluating binders' resistance to rutting based on their stiffness (deformation resistance), work originating in the US has mainly been concerned with ranking binders based on their recoverability in a multiple stress form. This paper details the design of a new modified multiple stress-strain creep recovery (MS-SCR) test. The test is designed to evaluate binders' rutting resistance based on two rutting resistance mechanisms: stiffness and recoverability. A preliminary investigation is presented in this paper followed by details of the design of the new modified test. A 40/60 penetration grade bitumen and bitumen-filler mastics prepared with three filler concentrations (35%, 50%, and 65% filler content by mass of mastic) were tested. In addition, two polymer modified bitumens (PMBs) using the same base bitumen type were examined for validation. Two parameters are introduced to characterise the short and long recovery in the new test. In terms of stiffness, the test allows the behaviour of binders at different stress levels and loading cycles to be studied and produces a new parameter that can quantify the degree of modification. Finally, a relationship between nonlinearity and normal force in the test was investigated.

Designing Location-Based Learning Experiences for People with Intellectual Disabilities and Additional Sensory Impairments

ERIC Educational Resources Information Center

Brown, David J.; McHugh, David; Standen, Penny; Evett, Lindsay; Shopland, Nick; Battersby, Steven

2011-01-01

The research reported here is part of a larger project which seeks to combine serious games (or games-based learning) with location-based services to help people with intellectual disabilities and additional sensory impairments to develop work based skills. Specifically this paper reports on where these approaches are combined to scaffold the…

The New NGSS Classroom: A Curriculum Framework for Project-Based Science Learning

ERIC Educational Resources Information Center

Holthuis, Nicole; Deutscher, Rebecca; Schultz, Susan E.; Jamshidi, Arash

2018-01-01

As schools work to implement the Next Generation Science Standards (NGSS), a team at Stanford University found that project-based learning is an effective framework for engaging students. The team used project-based learning, group activities, and performance-based assessments to design an effective, engaging curriculum. Over a three-year period,…

Pattern database applications from design to manufacturing

NASA Astrophysics Data System (ADS)

Zhuang, Linda; Zhu, Annie; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh

2017-03-01

Pattern-based approaches are becoming more common and popular as the industry moves to advanced technology nodes. At the beginning of a new technology node, a library of process weak point patterns for physical and electrical verification are starting to build up and used to prevent known hotspots from re-occurring on new designs. Then the pattern set is expanded to create test keys for process development in order to verify the manufacturing capability and precheck new tape-out designs for any potential yield detractors. With the database growing, the adoption of pattern-based approaches has expanded from design flows to technology development and then needed for mass-production purposes. This paper will present the complete downstream working flows of a design pattern database(PDB). This pattern-based data analysis flow covers different applications across different functional teams from generating enhancement kits to improving design manufacturability, populating new testing design data based on previous-learning, generating analysis data to improve mass-production efficiency and manufacturing equipment in-line control to check machine status consistency across different fab sites.

An error bound for a discrete reduced order model of a linear multivariable system

NASA Technical Reports Server (NTRS)

Al-Saggaf, Ubaid M.; Franklin, Gene F.

1987-01-01

The design of feasible controllers for high dimension multivariable systems can be greatly aided by a method of model reduction. In order for the design based on the order reduction to include a guarantee of stability, it is sufficient to have a bound on the model error. Previous work has provided such a bound for continuous-time systems for algorithms based on balancing. In this note an L-infinity bound is derived for model error for a method of order reduction of discrete linear multivariable systems based on balancing.

Study of Design Knowledge Capture (DKC) schemes implemented in magnetic bearing applications

NASA Technical Reports Server (NTRS)

1990-01-01

A design knowledge capture (DKC) scheme was implemented using frame-based techniques. The objective of such a system is to capture not only the knowledge which describes a design, but also that which explains how the design decisions were reached. These knowledge types were labelled definitive and explanatory, respectively. Examination of the design process helped determine what knowledge to retain and at what stage that knowledge is used. A discussion of frames resulted in the recognition of their value to knowledge representation and organization. The FORMS frame system was used as a basis for further development, and for examples using magnetic bearing design. The specific contributions made by this research include: determination that frame-based systems provide a useful methodology for management and application of design knowledge; definition of specific user interface requirements, (this consists of a window-based browser); specification of syntax for DKC commands; and demonstration of the feasibility of DKC by applications to existing designs. It was determined that design knowledge capture could become an extremely valuable engineering tool for complicated, long-life systems, but that further work was needed, particularly the development of a graphic, window-based interface.

A novel method for multifactorial bio-chemical experiments design based on combinational design theory.

PubMed

Wang, Xun; Sun, Beibei; Liu, Boyang; Fu, Yaping; Zheng, Pan

2017-01-01

Experimental design focuses on describing or explaining the multifactorial interactions that are hypothesized to reflect the variation. The design introduces conditions that may directly affect the variation, where particular conditions are purposely selected for observation. Combinatorial design theory deals with the existence, construction and properties of systems of finite sets whose arrangements satisfy generalized concepts of balance and/or symmetry. In this work, borrowing the concept of "balance" in combinatorial design theory, a novel method for multifactorial bio-chemical experiments design is proposed, where balanced templates in combinational design are used to select the conditions for observation. Balanced experimental data that covers all the influencing factors of experiments can be obtianed for further processing, such as training set for machine learning models. Finally, a software based on the proposed method is developed for designing experiments with covering influencing factors a certain number of times.

Mass reduction patterning of silicon-on-oxide-based micromirrors

NASA Astrophysics Data System (ADS)

Hall, Harris J.; Green, Andrew; Dooley, Sarah; Schmidt, Jason D.; Starman, LaVern A.; Langley, Derrick; Coutu, Ronald A.

2016-10-01

It has long been recognized in the design of micromirror-based optical systems that balancing static flatness of the mirror surface through structural design with the system's mechanical dynamic response is challenging. Although a variety of mass reduction approaches have been presented in the literature to address this performance trade, there has been little quantifiable comparison reported. In this work, different mass reduction approaches, some unique to the work, are quantifiably compared with solid plate thinning in both curvature and mass using commercial finite element simulation of a specific square silicon-on-insulator-based micromirror geometry. Other important considerations for micromirror surfaces, including surface profile and smoothness, are also discussed. Fabrication of one of these geometries, a two-dimensional tessellated square pattern, was performed in the presence of a 400-μm-tall central post structure using a simple single mask process. Limited experimental curvature measurements of fabricated samples are shown to correspond well with properly characterized simulation results and indicate ˜67% improvement in radius of curvature in comparison to a solid plate design of equivalent mass.

Measurement Matrix Design for Phase Retrieval Based on Mutual Information

NASA Astrophysics Data System (ADS)

Shlezinger, Nir; Dabora, Ron; Eldar, Yonina C.

2018-01-01

In phase retrieval problems, a signal of interest (SOI) is reconstructed based on the magnitude of a linear transformation of the SOI observed with additive noise. The linear transform is typically referred to as a measurement matrix. Many works on phase retrieval assume that the measurement matrix is a random Gaussian matrix, which, in the noiseless scenario with sufficiently many measurements, guarantees invertability of the transformation between the SOI and the observations, up to an inherent phase ambiguity. However, in many practical applications, the measurement matrix corresponds to an underlying physical setup, and is therefore deterministic, possibly with structural constraints. In this work we study the design of deterministic measurement matrices, based on maximizing the mutual information between the SOI and the observations. We characterize necessary conditions for the optimality of a measurement matrix, and analytically obtain the optimal matrix in the low signal-to-noise ratio regime. Practical methods for designing general measurement matrices and masked Fourier measurements are proposed. Simulation tests demonstrate the performance gain achieved by the proposed techniques compared to random Gaussian measurements for various phase recovery algorithms.

Evidence-based ergonomics. A comparison of Japanese and American office layouts.

PubMed

Noro, Kageyu; Fujimaki, Goroh; Kishi, Shinsuke

2003-01-01

There is a variety of alternatives in office layouts. Yet the theoretical basis and criteria for predicting how well these layouts accommodate employees are poorly understood. The objective of this study was to evaluate criteria for selecting office layouts. Intensive computer workers worked in simulated office layouts in a controlled experimental laboratory. Eye movement measures indicate that knowledge work requires both concentration and interaction. Findings pointed to one layout as providing optimum balance between these 2 requirements. Recommendations for establishing a theoretical basis and design criteria for selecting office layouts based on work style are suggested.

Using an integrative mock-up simulation approach for evidence-based evaluation of operating room design prototypes.

PubMed

Bayramzadeh, Sara; Joseph, Anjali; Allison, David; Shultz, Jonas; Abernathy, James

2018-07-01

This paper describes the process and tools developed as part of a multidisciplinary collaborative simulation-based approach for iterative design and evaluation of operating room (OR) prototypes. Full-scale physical mock-ups of healthcare spaces offer an opportunity to actively communicate with and to engage multidisciplinary stakeholders in the design process. While mock-ups are increasingly being used in healthcare facility design projects, they are rarely evaluated in a manner to support active user feedback and engagement. Researchers and architecture students worked closely with clinicians and architects to develop OR design prototypes and engaged clinical end-users in simulated scenarios. An evaluation toolkit was developed to compare design prototypes. The mock-up evaluation helped the team make key decisions about room size, location of OR table, intra-room zoning, and doors location. Structured simulation based mock-up evaluations conducted in the design process can help stakeholders visualize their future workspace and provide active feedback. Copyright © 2018 Elsevier Ltd. All rights reserved.

Direct care worker's perceptions of job satisfaction following implementation of work-based learning.

PubMed

Lopez, Cynthia; White, Diana L; Carder, Paula C

2014-02-01

The purpose of this study was to understand the impact of a work-based learning program on the work lives of Direct Care Workers (DCWs) at assisted living (AL) residences. The research questions were addressed using focus group data collected as part of a larger evaluation of a work-based learning (WBL) program called Jobs to Careers. The theoretical perspective of symbolic interactionism was used to frame the qualitative data analysis. Results indicated that the WBL program impacted DCWs' job satisfaction through the program curriculum and design and through three primary categories: relational aspects of work, worker identity, and finding time. This article presents a conceptual model for understanding how these categories are interrelated and the implications for WBL programs. Job satisfaction is an important topic that has been linked to quality of care and reduced turnover in long-term care settings.

Design and Simulation of a Birdcage Coil using CST Studio Suite for Application at 7T

NASA Astrophysics Data System (ADS)

Palau Tomas, Bernat; Li, Houmin; Anjum, M. R.

2013-12-01

This work describes the study of coils for Magnetic Resonance Imaging (MRI) applications. The principal objective is the design of a birdcage Radio Frequency (RF) coil to use in a 7 Tesla (7T) scanner. Higher strength field generates a better SNR and increased chemical shift effect, improving spectral fat suppression and spectroscopy. Moreover, a better SNR increases the spatial resolution or reduces the imaging time. This research work presented recent developments based on high field 7T design using CST studio. The birdcage coil achieves circular polarization and generates a high homogeneous radio frequency magnetic field under many conditions. Design of a Birdcage coil for a 7T to obtain the images from s mall animals (i.e. mouse). It opens the door to design and construct a Birdcage coil for a 7T to obtain human brain images. Firstly we design a birdcage coil then the results are obtained with simulator CST Wave Studio, creating a 3D model and generating a simulation. Finally the parameters are re adjusted to obtain our desired Larmor frequency 298.2 MHz for a correct operation in 7T. This research work demonstrates the theoretical results from our design and shows the designed antenna behavior.

Instructor/Operator Station Design Handbook for Aircrew Training Devices.

DTIC Science & Technology

1987-10-01

to only the necessary work areas and baffles it from the CRT; (f) use of a selective -spectrum lighting system, in which the spectral output of the...operator. While the device provides some new features which support training, such as a debrief facility and a computer-based instructor training module , the...ZIP Code) 10 SOURCE OF FUNDING NUMBERS Brooks Air Force Base, Texas 78235-5601 PROGRAM PROJECT TASK WORK UNIT ELEMENT NO NO NO ACCESSION NO 62205F

Preparing skilled labor in industry through production-based curriculum approach in vocational high school

NASA Astrophysics Data System (ADS)

Yoto

2017-09-01

Vocational high school (Sekolah Menengah Kejuruan / SMK) aims to prepare mid-level skilled labors to work in the industry and are able to create self-employment opportunities. For those reasons, the curriculum in SMK should be based on meeting the needs of the industries and is able to prepare learners to master the competence in accordance with the skills program of their choice. Production based curriculum is the curriculum which the learning process is designed together with the production process or using production process as a learning medium. This approach with the primary intention to introduce students with the real working environment and not merely simulations. In the production-based curriculum implementation model, students are directly involved in the industry through the implementation of industrial working practices, do work on production units in school, and do practical work in school by doing the job as done in the industry by using industry standards machines.

Design and Implement of Low Ripple and Quasi-digital Power Supply

NASA Astrophysics Data System (ADS)

Xiangli, Li; Yanjun, Wei; Hanhong, Qi; Yan, Ma

A switch linearity hybrid power supply based on single chip microcomputer is designed which merged the merits of the switching and linear power supply. Main circuit includes pre-regulator which works in switching mode and series regulator which works in linear mode. Two-stage regulation mode was adopted in the main circuit of the power. A single chip computer (SCM) and high resolution of series D/A and A/D converters are applied to control and measurement which achieved continuous adjustable and low ripple constant current or voltage power supply

Value engineering on the designed operator work tools for brick and rings wells production

NASA Astrophysics Data System (ADS)

Ayu Bidiawati J., R.; Muchtiar, Yesmizarti; Wariza, Ragil Okta

2017-06-01

Operator working tools in making brick and ring wells were designed and made, and the value engineering was calculated to identify and develop the function of these tools in obtaining the balance between cost, reliability and appearance. This study focused on the value of functional components of the tools and attempted to increase the difference between the costs incurred by the generated values. The purpose of this study was to determine the alternatives of tools design and to determine the performance of each alternative. The technique was developed using FAST method that consisted of five stages: information, creative, analytical, development and presentation stage. The results of the analysis concluded that the designed tools have higher value and better function description. There were four alternative draft improvements for operator working tools. The best alternative was determined based on the rank by using matrix evaluation. Best performance was obtained by the alternative II, amounting to 98.92 with a value of 0.77.

Workstation design in carpet hand-weaving operation: guidelines for prevention of musculoskeletal disorders.

PubMed

Choobineh, Alireza; Lahmi, Mohammadali; Hosseini, Mostafa; Shahnavaz, Houshang; Jazani, Reza Khani

2004-01-01

Carpet weavers suffer from musculoskeletal problems mainly attributed to poor working postures. Their posture is mostly constrained by the design of workstations. This study was conducted to investigate the effects of 2 design parameters (weaving height and seat type) on postural variables and subjective experience, and to develop guidelines for workstation adjustments. At an experimental workstation, 30 professional weavers worked in 9 different conditions. Working posture and weavers' perceptions were measured. It was shown that head, neck and shoulder postures were influenced by weaving height. Both design parameters influenced trunk and elbows postures. The determinant factor for weavers' perception on the neck, shoulders and elbows was found to be weaving height, and on the back and knees it was seat type. Based on the results, the following guidelines were developed: (a) weaving height should be adjusted to 20 cm above elbow height; (b) a 10 degrees forward-sloping high seat is to be used at weaving workstations.

Design options for improving protective gloves for industrial assembly work.

PubMed

Dianat, Iman; Haslegrave, Christine M; Stedmon, Alex W

2014-07-01

The study investigated the effects of wearing two new designs of cotton glove on several hand performance capabilities and compared them against the effects of barehanded, single-layered and double cotton glove conditions when working with hand tools (screwdriver and pliers). The new glove designs were based on the findings of subjective hand discomfort assessments for this type of work and aimed to match the glove thickness to the localised pressure and sensitivity in different areas of the hand as well as to provide adequate dexterity for fine manipulative tasks. The results showed that the first prototype glove and the barehanded condition were comparable and provided better dexterity and higher handgrip strength than double thickness gloves. The results support the hypothesis that selective thickness in different areas of the hand could be applied by glove manufacturers to improve the glove design, so that it can protect the hands from the environment and at the same time allow optimal hand performance capabilities. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Design considerations for space radiators based on the liquid sheet (LSR) concept

NASA Technical Reports Server (NTRS)

Juhasz, Albert J.; Chubb, Donald L.

1991-01-01

Concept development work on space heat rejection subsystems tailored to the requirements of various space power conversion systems is proceeding over a broad front of technologies at NASA LeRC. Included are orbital and planetary surface based radiator concepts utilizing pumped loops, a variety of heat pipe radiator concepts, and the innovative liquid sheet radiator (LSR). The basic feasibility of the LSR concept was investigated in prior work which generated preliminary information indicating the suitability of the LSR concept for space power systems requiring cycle reject heat to be radiated to the space sink at low-to-mid temperatures (300 to 400 K), with silicon oils used for the radiator working fluid. This study is directed at performing a comparative examination of LSR characteristics as they affect the basic design of low earth orbit solar dynamic power conversion systems. The power systems considered were based on the closed Brayton (CBC) and the Free Piston Stirling (FPS) cycles, each with a power output of 2 kWe and using previously tested silicone oil (Dow-Corning Me2) as the radiator working fluid. Conclusions indicate that, due to its ability for direct cold end cooling, an LSR based heat rejection subsystem is far more compatible with a Stirling space power system than with a CBC, which requires LSR coupling by means of an intermediate gas/liquid heat exchanger and adjustment of cycle operating conditions.

The design and application of effective written instructional material: a review of published work.

PubMed

Mayberry, John F

2007-09-01

This review will consider the evidence base for the format of educational material drawing on academic papers and the practice of the design industry. The core issues identified from the review are drawn together in guidelines for educational posters, text and web based material. The review deals with the design of written material both for use in leaflets and books as well as the impact of factors such as font type and size as well as colour on poster design. It sets these aspects of educational material within a research framework, which looks at impact on learning and subsequent change in practice. These issues are examined through a practical example of a poster designed for a regional gastroenterology meeting.

Data Sufficiency Assessment and Pumping Test Design for Groundwater Prediction Using Decision Theory and Genetic Algorithms

NASA Astrophysics Data System (ADS)

McPhee, J.; William, Y. W.

2005-12-01

This work presents a methodology for pumping test design based on the reliability requirements of a groundwater model. Reliability requirements take into consideration the application of the model results in groundwater management, expressed in this case as a multiobjective management model. The pumping test design is formulated as a mixed-integer nonlinear programming (MINLP) problem and solved using a combination of genetic algorithm (GA) and gradient-based optimization. Bayesian decision theory provides a formal framework for assessing the influence of parameter uncertainty over the reliability of the proposed pumping test. The proposed methodology is useful for selecting a robust design that will outperform all other candidate designs under most potential 'true' states of the system

Research on AutoCAD secondary development and function expansion based on VBA technology

NASA Astrophysics Data System (ADS)

Zhang, Runmei; Gu, Yehuan

2017-06-01

AutoCAD is the most widely used drawing tool among the similar design drawing products. In the process of drawing different types of design drawings of the same product, there are a lot of repetitive and single work contents. The traditional manual method uses a drawing software AutoCAD drawing graphics with low efficiency, high error rate and high input cost shortcomings and many more. In order to solve these problems, the design of the parametric drawing system of the hot-rolled I-beam (steel beam) cross-section is completed by using the VBA secondary development tool and the Access database software with large-capacity storage data, and the analysis of the functional extension of the plane drawing and the parametric drawing design in this paper. For the secondary development of AutoCAD functions, the system drawing work will be simplified and work efficiency also has been greatly improved. This introduction of parametric design of AutoCAD drawing system to promote the industrial mass production and related industries economic growth rate similar to the standard I-beam hot-rolled products.

EUV near normal incidence collector development at SAGEM

NASA Astrophysics Data System (ADS)

Mercier Ythier, R.; Bozec, X.; Geyl, R.; Rinchet, A.; Hecquet, Christophe; Ravet-Krill, Marie-Françoise; Delmotte, Franck; Sassolas, Benoît; Flaminio, Raffaele; Mackowski, Jean-Marie; Michel, Christophe; Montorio, Jean-Luc; Morgado, Nazario; Pinard, Laurent; Roméo, Elodie

2008-03-01

Through its participation to European programs, SAGEM has worked on the design and manufacturing of normal incidence collectors for EUV sources. By opposition to grazing incidence, normal incidence collectors are expected to collect more light with a simpler and cheaper design. Designs are presented for the two current types of existing sources: Discharge Produced Plasma (DPP) and Laser Produced Plasma (LPP). Collection efficiency is calculated in both cases. It is shown that these collectors can achieve about 10 % efficiency for DPP sources and 40 % for LPP sources. SAGEM works on the collectors manufacturability are also presented, including polishing, coating and cooling. The feasibility of polishing has been demonstrated with a roughness better than 2 angstroms obtained on several materials (glass, silicon, Silicon Carbide, metals...). SAGEM is currently working with the Institut d'Optique and the Laboratoire des Materiaux Avancés on the design and the process of EUV coatings for large mirrors. Lastly, SAGEM has studied the design and feasibility of an efficient thermal control, based on a liquid cooling through slim channels machined close to the optical surface.

Getting the Most from Working with Higher Education: A Review of Methods Used within a Participatory Design Activity Involving KS3 Special School Pupils and Undergraduate and Post-Graduate Industrial Design Students

ERIC Educational Resources Information Center

Torrens, George Edward; Newton, Helen

2013-01-01

This paper provides education-based researchers and practitioners with the preferred research and design methods used by Higher Education Institute (HEI) students and Key Stage 3 (KS3) pupils applied within a participatory approach to a design activity. The outcomes were that both pupils and students found informal (unstructured) interview to be…

Understanding the bond-energy, hardness, and adhesive force from the phase diagram via the electron work function

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Hao; Huang, Xiaochen; Li, Dongyang, E-mail: dongyang.li@ualberta.ca

2014-11-07

Properties of metallic materials are intrinsically determined by their electron behavior. However, relevant theoretical treatment involving quantum mechanics is complicated and difficult to be applied in materials design. Electron work function (EWF) has been demonstrated to be a simple but fundamental parameter which well correlates properties of materials with their electron behavior and could thus be used to predict material properties from the aspect of electron activities in a relatively easy manner. In this article, we propose a method to extract the electron work functions of binary solid solutions or alloys from their phase diagrams and use this simple approachmore » to predict their mechanical strength and surface properties, such as adhesion. Two alloys, Fe-Ni and Cu-Zn, are used as samples for the study. EWFs extracted from phase diagrams show same trends as experimentally observed ones, based on which hardness and surface adhesive force of the alloys are predicted. This new methodology provides an alternative approach to predict material properties based on the work function, which is extractable from the phase diagram. This work may also help maximize the power of phase diagram for materials design and development.« less

Centralized vs. decentralized nursing stations: effects on nurses' functional use of space and work environment.

PubMed

Zborowsky, Terri; Bunker-Hellmich, Lou; Morelli, Agneta; O'Neill, Mike

2010-01-01

Evidence-based findings of the effects of nursing station design on nurses' work environment and work behavior are essential to improve conditions and increase retention among these fundamental members of the healthcare delivery team. The purpose of this exploratory study was to investigate how nursing station design (i.e., centralized and decentralized nursing station layouts) affected nurses' use of space, patient visibility, noise levels, and perceptions of the work environment. Advances in information technology have enabled nurses to move away from traditional centralized paper-charting stations to smaller decentralized work stations and charting substations located closer to, or inside of, patient rooms. Improved understanding of the trade-offs presented by centralized and decentralized nursing station design has the potential to provide useful information for future nursing station layouts. This information will be critical for understanding the nurse environment "fit." The study used an exploratory design with both qualitative and quantitative methods. Qualitative data regarding the effects of nursing station design on nurses' health and work environment were gathered by means of focus group interviews. Quantitative data-gathering techniques included place- and person-centered space use observations, patient visibility assessments, sound level measurements, and an online questionnaire regarding perceptions of the work environment. Nurses on all units were observed most frequently performing telephone, computer, and administrative duties. Time spent using telephones, computers, and performing other administrative duties was significantly higher in the centralized nursing stations. Consultations with medical staff and social interactions were significantly less frequent in decentralized nursing stations. There were no indications that either centralized or decentralized nursing station designs resulted in superior visibility. Sound levels measured in all nursing stations exceeded recommended levels during all shifts. No significant differences were identified in nurses' perceptions of work control-demand-support in centralized and decentralized nursing station designs. The "hybrid" nursing design model in which decentralized nursing stations are coupled with centralized meeting rooms for consultation between staff members may strike a balance between the increase in computer duties and the ongoing need for communication and consultation that addresses the conflicting demands of technology and direct patient care.

Mapping Context-Based Learning Environments: The Construction of an Instrument

ERIC Educational Resources Information Center

de Putter-Smits, L. G. A.; Taconis, R.; Jochems, W. M. G.

2013-01-01

The current trend in science curricula is to adopt a context-based pedagogical approach to teaching. New study materials for this innovation are often designed by teachers working with university experts. In this article, it is proposed that teachers need to acquire corresponding teaching competences to create a context-based learning environment.…

Challenge Based Innovation: Translating Fundamental Research into Societal Applications

ERIC Educational Resources Information Center

Kurikka, Joona; Utriainen, Tuuli; Repokari, Lauri

2016-01-01

This paper is based on work done at IdeaSquare, a new innovation experiment at CERN, the European Organization for Nuclear Research. The paper explores the translation of fundamental research into societal applications with the help of multidisciplinary student teams, project- and problem-based learning and design thinking methods. The theme is…

Design and Fabrication of Graphene Reinforced Polymer Conductive Patch-Based Inset Fed Microstrip Antenna

NASA Astrophysics Data System (ADS)

Deepak, A.; Kannan, P. Muthu; Shankar, P.

This work explores the design and fabrication of graphene reinforced polyvinylidene fluoride (PVDF) patch-based microstrip antenna. Primarily, antenna was designed at 6GHz frequency and simulation results were obtained using Ansoft HFSS tool. Later fabrication of antenna was carried out with graphene-PVDF films as conducting patch deposited on bakelite substrate and copper as ground plane. Graphene-PVDF films were prepared using solvent casting process. The radiation efficiency of fabricated microstrip patch antenna was 48% entailing it to be adapted as a practically functional antenna. Both simulated and the practical results were compared and analyzed.

ART/Ada design project, phase 1

NASA Technical Reports Server (NTRS)

1989-01-01

An Ada-Based Expert System Building Tool Design Research Project was conducted. The goal was to investigate various issues in the context of the design of an Ada-based expert system building tool. An attempt was made to achieve a comprehensive understanding of the potential for embedding expert systems in Ada systems for eventual application in future projects. The current status of the project is described by introducing an operational prototype, ART/Ada. How the project was conducted is explained. The performance of the prototype is analyzed and compared with other related works. Future research directions are suggested.

A unifying framework for systems modeling, control systems design, and system operation

NASA Technical Reports Server (NTRS)

Dvorak, Daniel L.; Indictor, Mark B.; Ingham, Michel D.; Rasmussen, Robert D.; Stringfellow, Margaret V.

2005-01-01

Current engineering practice in the analysis and design of large-scale multi-disciplinary control systems is typified by some form of decomposition- whether functional or physical or discipline-based-that enables multiple teams to work in parallel and in relative isolation. Too often, the resulting system after integration is an awkward marriage of different control and data mechanisms with poor end-to-end accountability. System of systems engineering, which faces this problem on a large scale, cries out for a unifying framework to guide analysis, design, and operation. This paper describes such a framework based on a state-, model-, and goal-based architecture for semi-autonomous control systems that guides analysis and modeling, shapes control system software design, and directly specifies operational intent. This paper illustrates the key concepts in the context of a large-scale, concurrent, globally distributed system of systems: NASA's proposed Array-based Deep Space Network.

Managing Highway Maintenance: Budget Preparation, Unit 9, Level 3.

ERIC Educational Resources Information Center

Federal Highway Administration (DOT), Washington, DC. Offices of Research and Development.

Part of the series "Managing Highway Maintenance," the unit describes the essential steps in developing a maintenance budget, or performance budget, based on the work to be done. It is designed for field engineers and supervisors who assist department officials in preparing work programs and budgets. The format is a programed,…

Collaborative Practice: A Model of Successful Working in Schools

ERIC Educational Resources Information Center

James, C. R.; Dunning, G.; Connolly, M.; Elliott, T.

2007-01-01

Purpose: The purpose of this paper is to develop the notion of collaborative practice from theoretical and empirical bases. Design/methodology/approach: The research analysed the concepts of collaboration, reflective practice and the primary task. It also examined the ways of working of 18 primary schools in Wales where the level of student…

Beyond the Fear Factor: Work/Family Policies in Academia--Resources or Rewards?

ERIC Educational Resources Information Center

Spalter-Roth, Roberta; Erskine, William

2005-01-01

Several decades ago, as the composition of the workforce changed and married women increased their labor-force participation rates, federal policies were designed to help employees balance work and family responsibilities. And as the gender composition of faculty in colleges and universities increasingly changed as well, a broad-based movement…

Shoe Box Circuits

ERIC Educational Resources Information Center

Sandifer, Cody

2009-01-01

Students' eyes grow wide with wonder as they get a motor to work or make a bulb light for the first time. As these daunting feats of electrical engineering remind us, teaching electricity is invariably rewarding and worthwhile. In this inquiry-based science project, elementary students work in pairs to design and wire a shoe box "room" that meets…

Using Pair Programming to Teach CAD Based Engineering Graphics

ERIC Educational Resources Information Center

Leland, Robert P.

2010-01-01

Pair programming was introduced into a course in engineering graphics that emphasizes solid modeling using SolidWorks. In pair programming, two students work at a single computer, and periodically trade off roles as driver (hands on the keyboard and mouse) and navigator (discuss strategy and design issues). Pair programming was used in a design…

Roles of Working Memory Performance and Instructional Strategy in Complex Cognitive Task Performance

ERIC Educational Resources Information Center

Cevik, V.; Altun, A.

2016-01-01

This study aims to investigate how working memory (WM) performances and instructional strategy choices affect learners' complex cognitive task performance in online environments. Three different e-learning environments were designed based on Merrill's (2006a) model of instructional strategies. The lack of experimental research on his framework is…

76 FR 17183 - Aviation Rulemaking Advisory Committee; Transport Airplane and Engine Issues-New Task

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-28

... Harmonization Working Group, to assist in analysis of this task. Recent research shows that regardless of... recommend performance-based standards that allows manufacturers the flexibility to design airplanes to meet... level of safety commensurate with part 25. The working group should consider the following areas of the...

Holistic Designs for Field Instruction in the Contemporary Social Work Curriculum.

ERIC Educational Resources Information Center

Skolnik, Louise; Papell, Catherine P.

1994-01-01

Two models for social work field instruction are presented, both introduced in a university-based laboratory setting. Both models attempt to integrate field practice with content of the holistic practice curriculum. They were derived from a holistic/multimethod assignment and a holistic/generalist orientation. Issues in field teaching are…

The Impact of Personal Resources on Turnover Intention: The Mediating Effects of Work Engagement

ERIC Educational Resources Information Center

Kim, Woocheol; Hyun, Young Sup

2017-01-01

Purpose: This paper aims to investigate mediating effects of employees' work engagement in the relationships between their personal resources (i.e. self-efficacy, organizational-based self-esteem and optimism) and turnover intention within Korean organizations. Design/methodology/approach: A total of 571 survey responses collected from Korean…

Does the Availability of Vocational Qualifications through Work Assist Social Inclusion?

ERIC Educational Resources Information Center

Smith, Erica; Smith, Andy

2011-01-01

Purpose: The purpose of this paper is to discuss whether the availability of qualifications through work-based traineeships in Australia assists social inclusion. Design/methodology/approach: Industry case studies, of the finance and cleaning industries, were undertaken as part of a national research project on quality in traineeships. The two…

Working Commitment among Trainee Teachers: A Meta Evaluation Approach

ERIC Educational Resources Information Center

Hamzah, Mohd Sahandri Gani B.; Mohamed, Hapidah Bt.; Abdullah, Saifuddin Kumar B.; Baki, Roselan B.

2008-01-01

The main aim of the study was to evaluate trainee teachers working commitment in their teaching practicum. There were seven component teaching practices and eleven demographic factors. The instrument of the study was extracted from various sources to suit the research design based on Units, Treatments, Observing, and Surveying (UTOS) model…

Engaging with Employers in Work-Based Learning: A Foundation Degree in Applied Technology

ERIC Educational Resources Information Center

Benefer, Richard

2007-01-01

Purpose: This paper aims to describe the work of Staffordshire University in engaging with local employers and local further education colleges in the development of a Foundation Degree in Applied Technology. Design/methodology/approach: Following an outline of current government policy in employer engagement, the paper identifies--from the…

A System to Enable the Blind to Work Independently on the Center Lathe.

ERIC Educational Resources Information Center

Guha, Sujoy K.; Anand, Sneh

1980-01-01

A study has shown that with suitable accessories to machines and appropriate work planning, totally blind machinists can perform varied tasks on a lathe independently. Based on the results of the study, simple accessories have been designed and tested for use with the center lathe. (Author/PHR)

Learning for Renewal; Learning in a Trade Union Practice

ERIC Educational Resources Information Center

Kopsen, Susanne

2011-01-01

Purpose: The purpose of this paper is to analyze learning in a Swedish trade union board in a workplace, according to contemporary challenges in working life and conditions, of decentralization and local independency of trade union work and learning. Design/methodology/approach: The paper is based on ethnographic studies of two Swedish local trade…

Designing and Developing a Work Experience Component for a Vocational Education Curriculum.

ERIC Educational Resources Information Center

Santos, Otto, Jr.; Olinzock, Anthony

A work experience component for vocational educator teacher education based on demonstrated competence is proposed. Its basis is research concerning vocational education; sociometric conditions and needs; analyses of the past, present, and future of vocational education; and the current state of the art relative to curriculum systems. This…

Computer-Based Working Memory Training in Children with Mild Intellectual Disability

ERIC Educational Resources Information Center

Delavarian, Mona; Bokharaeian, Behrouz; Towhidkhah, Farzad; Gharibzadeh, Shahriar

2015-01-01

We designed a working memory (WM) training programme in game framework for mild intellectually disabled students. Twenty-four students participated as test and control groups. The auditory and visual-spatial WM were assessed by primary test, which included computerised Wechsler numerical forward and backward sub-tests and secondary tests, which…

Hospitality Service: Hotel and Restaurant Management and Culinary Arts Curriculum Guide.

ERIC Educational Resources Information Center

Joliet Junior Coll., IL.

This publication contains competency-based materials for hotel/restaurant management and culinary arts. The materials are designed for students to learn from a work station concept by rotating through a variety of real work settings in a hotel/restaurant environment. In addition, the materials indicate whether or not the students have developed…

Unified Technical Concepts. Module 2: Work.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on work is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy system. In this…

Work Site-Based Environmental Interventions to Reduce Sedentary Behavior: A Systematic Review.

PubMed

Hutcheson, Amanda K; Piazza, Andrew J; Knowlden, Adam P

2018-01-01

The purpose of this investigation was to systematically review work site-based, environmental interventions to reduce sedentary behavior following preferred reporting items for systematic reviews and meta-analyses guidelines. Data were extracted from Medical Literature Analysis and Retrieval System Online, Cochrane Central Register of Controlled Trials, and Web of Science between January 2005 and December 2015. Inclusion criteria were work site interventions, published in peer-reviewed journals, employing environmental modalities, targeting sedentary behavior, and using any quantitative design. Exclusion criteria were noninterventions and non-English publications. Data extracted included study design, population, intervention dosage, intervention activities, evaluation measures, and intervention effects. Data were tabulated quantitatively and synthesized qualitatively. A total of 15 articles were identified for review and 14 reported statistically significant decreases in sedentary behavior. The majority of studies employed a randomized controlled trial design (n = 7), used inclinometers to measure sedentary behavior (n = 9), recruited predominantly female samples (n = 15), and utilized sit-to-stand desks as the primary intervention modality (n = 10). The mean methodological quality score was 6.2 out of 10. Environmental work site interventions to reduce sedentary behavior show promise because work sites often have more control over environmental factors. Limitations of this intervention stream include inconsistent measurement of sedentary behavior, absence of theoretical frameworks to guide program development, and absence of long-term evaluation. Future studies should include clear reporting of intervention strategies and explicit operationalization of theoretical constructs.

Design of an Ultra-Efficient GaN High Power Amplifier for Radar Front-Ends Using Active Harmonic Load-Pull

NASA Technical Reports Server (NTRS)

Thrivikraman, Tushar; Hoffman, James

2012-01-01

This work presents a new measurement technique, mixed-signal active harmonic load-pull (MSALP) developed by Anterverta-mw in partnership with Maury Microwave, that allows for wide-band ultra-high efficiency amplifiers to be designed using GaN technology. An overview of the theory behind active load-pull is presented and why load-pull is important for high-power device characterization. In addition, an example procedure is presented that outlines a methodology for amplifier design using this measurement system. Lastly, measured results of a 10W GaN amplifier are presented. This work aims to highlight the benefit of using this sophisticated measurement systems for to optimize amplifier design for real radar waveforms that in turn will simplify implementation of space-based radar systems

Integrated Design Engineering Analysis (IDEA) Environment Automated Generation of Structured CFD Grids using Topology Methods

NASA Technical Reports Server (NTRS)

Kamhawi, Hilmi N.

2012-01-01

This report documents the work performed from March 2010 to March 2012. The Integrated Design and Engineering Analysis (IDEA) environment is a collaborative environment based on an object-oriented, multidisciplinary, distributed framework using the Adaptive Modeling Language (AML) as a framework and supporting the configuration design and parametric CFD grid generation. This report will focus on describing the work in the area of parametric CFD grid generation using novel concepts for defining the interaction between the mesh topology and the geometry in such a way as to separate the mesh topology from the geometric topology while maintaining the link between the mesh topology and the actual geometry.

Quality engineering tools focused on high power LED driver design using boost power stages in switch mode

NASA Astrophysics Data System (ADS)

Ileana, Ioan; Risteiu, Mircea; Marc, Gheorghe

2016-12-01

This paper is a part of our research dedicated to high power LED lamps designing. The boost-up selected technology wants to meet driver producers' tendency in the frame of efficiency and disturbances constrains. In our work we used modeling and simulation tools for implementing scenarios of the driver work when some controlling functions are executed (output voltage/ current versus input voltage and fixed switching frequency, input and output electric power transfer versus switching frequency, transient inductor voltage analysis, and transient out capacitor analysis). Some electrical and thermal stress conditions are also analyzed. Based on these aspects, a high reliable power LED driver has been designed.

Making the Case for Practice-Based Research and the Imperative Role of Design Practitioners.

PubMed

Freihoefer, Kara; Zborowsky, Terri

2017-04-01

The purpose of this article is to justify the need for evidence-based design (EBD) in a research-based architecture and design practice. This article examines the current state of practice-based research (PBR), supports the need for EBD, illustrates PBR methods that can be applied to design work, and explores how findings can be used as a decision-making tool during design and as a validation tool during postoccupancy. As a result, design professions' body of knowledge will advance and practitioners will be better informed to protect the health, safety, and welfare of the society. Furthermore, characteristics of Friedman's progressive research program are used as a framework to examine the current state of PBR in design practice. A modified EBD approach is proposed and showcased with a case study of a renovated inpatient unit. The modified approach demonstrates how a highly integrated project team, especially the role of design practitioners, contributed to the success of utilizing baseline findings and evidence in decision-making throughout the design process. Lastly, recommendations and resources for learning research concepts are provided for practitioners. It is the role of practitioners to pave the way for the next generation of design professionals, as the request and expectation for research become more prevalent in design practice.

Duplex Design Project: Science Pilot Test.

ERIC Educational Resources Information Center

Center for Research on Evaluation, Standards, and Student Testing, Los Angeles, CA.

Work is reported towards the completion of a prototype duplex-design assessment instrument for grade-12 science. The student course-background questionnaire and the pretest section of the two-stage instrument that was developed were administered to all 134 12th-grade students at St. Clairsville High School (Ohio). Based on the information obtained…

78 FR 36205 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-17

... identification, referral for services, and service follow-up of youth at risk. \\1\\ The evaluation as designed... activities of the grantees, the research questions outlined in the evaluation statement of work, and the state of the knowledge base in the field of suicide prevention. As such, while the evaluation design...

Plants in the Classroom, An Environmental Investigation.

ERIC Educational Resources Information Center

National Wildlife Federation, Washington, DC.

This environmental unit is one of a series designed for integration within the existing curriculum. The unit is self-contained and requires minimal teacher preparation. The philosophy of this series is based on an experience-oriented process that encourages self-paced independent student work. This particular unit, designed for the primary grades,…

Using Design-Based Research to Improve the Lesson Study Approach to Professional Development in Camden (London)

ERIC Educational Resources Information Center

Brown, Chris; Taylor, Carol; Ponambalum, Lorna

2016-01-01

The Haverstock Primary to Secondary Transition Project was designed to improve the experience of transition to secondary school for vulnerable pupils in Camden (London). The project used lesson study to help primary and secondary practitioners work collaboratively, to develop effective cross-phase pedagogical approaches to teaching…

Beyond Member-Checking: A Dialogic Approach to the Research Interview

ERIC Educational Resources Information Center

Harvey, Lou

2015-01-01

This article presents a dialogic qualitative interview design for a narrative study of six international UK university students' motivation for learning English. Based on the work of Mikhail Bakhtin, this design was developed in order to address the limitations of member-checking [Lincoln, Y. S., and E. G. Guba. 1985. "Naturalistic…

Does Accreditation Matter for Art & Design Schools in Canada?

ERIC Educational Resources Information Center

Shimizu, Reiko (Leiko)

2013-01-01

Studio-based degrees in fine arts and design are not often written about in higher education literature. Ten years ago, urban theorist Richard Florida coined the term the "creative class" as individuals who "do a wide variety of work in a wide variety of industries -- from technology to entertainment, journalism to finance, highend…

Evaluating Design Enhancements to the Tablet Arm Chair in Language Instruction Classes at UNC Chapel Hill

ERIC Educational Resources Information Center

Henshaw, Robert Griffith; Reubens, Andrea

2014-01-01

Higher education institutions are increasingly interested in cost-effective classroom furniture solutions that support diverse teaching methods by facilitating movement between lecture and interactive instructional methods such as small group work. Several furniture manufacturers are exploring designs based on the traditional tablet arm chair. A…

International Workforce Initiatives: Definitions, Design Options, and Project Profiles. Working Paper Series. No. 1

ERIC Educational Resources Information Center

Wright, J.W., Jr.

2010-01-01

This publication is intended for three primary audiences: international development professionals who want to define "workforce" for program design purposes, those who seek information about field activities, and those who want to reflect on the implementation of successful, high impact programs--whether they were broad-based or…

Engineering Design Activities and Conceptual Change in Middle School Science

ERIC Educational Resources Information Center

Schnittka, Christine G.

2009-01-01

The purpose of this research was to investigate the impact of engineering design classroom activities on conceptual change in science, and on attitudes toward and knowledge about engineering. Students were given a situated learning context and a rationale for learning science in an active, inquiry-based method, and worked in small collaborative…

Language and Mathematics Education.

ERIC Educational Resources Information Center

Zepp, Raymond

This book is designed for those interested in the teaching of mathematics, in both first language and second language contexts, and is based on 15 years' teaching experience in Africa and Asia. The book is designed to present the main issues of language in mathematics teaching, and is therefore not a highly technical work. Chapters included are:…

Individualized Instruction and Unipacs.

ERIC Educational Resources Information Center

Kohut, Sylvester, Jr.

Individualized instruction is an educational program in which grade levels and time units are designed to permit the student to work at his own pace and level with the use of unipacs. The unipac, a "unique package," is a specially designed group of learning activities based on specific behavioral objectives chosen by the student. Unipacs consist…

Design of a Food Chemistry-Themed Course for Nonscience Majors

ERIC Educational Resources Information Center

Bell, Patrice

2014-01-01

The physical science curriculum design at Georgia Gwinnett College requires a theme-based course (lecture and group work, and laboratory) for nonscience majors. Increased student engagement is anticipated when science topics are taught in the context of a topic of which students can select during course registration. This paper presents the course…

Dad Was a Terrible Hard Worker: The Influence of Family and School on Dublin's Men's Working Lives--Preliminary Findings. CLMS Working Paper.

ERIC Educational Resources Information Center

Goodwin, John

The influences that home, family, and education have on Irish men's experiences of working life are explored based on interviews and questionnaire research carried out in North Dublin during 1997 and 1998. A two-stage research design was adopted. The first stage involved a short attitudinal-type questionnaire given to men at a sporting club. The…

Return to Work: Work-Based Learning and the Reintegration of Unemployed Adults into the Labour Market. Working Paper No 21

ERIC Educational Resources Information Center

Dehmel, Alexandra

2013-01-01

Low-qualified adults have experienced a greater rise in unemployment than any other group in Europe. What particular barriers are they facing in (re-)entering the labour market? How can VET be used in active labour market policies to help overcome these barriers? How can training programmes be designed to address the particular needs of this…

Designing and researching of the virtual display system based on the prism elements

NASA Astrophysics Data System (ADS)

Vasilev, V. N.; Grimm, V. A.; Romanova, G. E.; Smirnov, S. A.; Bakholdin, A. V.; Grishina, N. Y.

2014-05-01

Problems of designing of systems for virtual display systems for augmented reality placed near the observers eye (so called head worn displays) with the light guide prismatic elements are considered. Systems of augmented reality is the complex consists of the image generator (most often it's the microdisplay with the illumination system if the display is not self-luminous), the objective which forms the display image practically in infinity and the combiner which organizes the light splitting so that an observer could see the information of the microdisplay and the surrounding environment as the background at the same time. This work deals with the system with the combiner based on the composite structure of the prism elements. In the work three cases of the prism combiner design are considered and also the results of the modeling with the optical design software are presented. In the model the question of the large pupil zone was analyzed and also the discontinuous character (mosaic structure) of the angular field in transmission of the information from the microdisplay to the observer's eye with the prismatic structure are discussed.

Knowledge-based graphical interfaces for presenting technical information

NASA Technical Reports Server (NTRS)

Feiner, Steven

1988-01-01

Designing effective presentations of technical information is extremely difficult and time-consuming. Moreover, the combination of increasing task complexity and declining job skills makes the need for high-quality technical presentations especially urgent. We believe that this need can ultimately be met through the development of knowledge-based graphical interfaces that can design and present technical information. Since much material is most naturally communicated through pictures, our work has stressed the importance of well-designed graphics, concentrating on generating pictures and laying out displays containing them. We describe APEX, a testbed picture generation system that creates sequences of pictures that depict the performance of simple actions in a world of 3D objects. Our system supports rules for determining automatically the objects to be shown in a picture, the style and level of detail with which they should be rendered, the method by which the action itself should be indicated, and the picture's camera specification. We then describe work on GRIDS, an experimental display layout system that addresses some of the problems in designing displays containing these pictures, determining the position and size of the material to be presented.

The algorithm of numerical calculation of constraints reactions in a dynamic system of transport machine

NASA Astrophysics Data System (ADS)

Akhtulov, A. L.

2018-01-01

The questions of construction and practical application of the automation system for the design of components and aggregates for the construction of transport vehicles are considered, taking into account their dynamic characteristics. Based on the results of the studies, a unified method for determining the reactions of bonds of a complex spatial structure is proposed. The technique, based on the method of substructures, allows us to determine the values of the transfer functions taking into account the reactions of the bonds. After the carried out researches it is necessary to note, that such approach gives the most satisfactory results and can be used for calculations of complex mechanical systems of machines and units of different purposes. The directions of increasing the degree of validity of technical decisions are shown, especially in the early stages of design, when the cost of errors is high, with careful thorough working out of all the elements of the design, which is really feasible only on the basis of automation of design and technological work.

Role of intermediate metallic sub-layers in improving the efficiency of kesterite solar cells: concept and optimization

NASA Astrophysics Data System (ADS)

Ferhati, H.; Djeffal, F.

2018-03-01

In this work, versatile CdS/Cu 2 ZnSnS 4 (CZTS) solar cell designs based on intermediate metallic sub-layers (Au, Ti, and Ag) engineering are proposed for enhancing light-scattering behavior and reducing recombination losses. The idea behind this work is to generate optical confinement regions in the CZTS absorber layer to achieve an improved absorption and appropriate antireflection effects. Moreover, the ultra-thin metal at the CZTS/Mo interface can be helpful for reducing the series resistance, where it behaves like a blocking layer for the Sulfur diffusion. We further combine the proposed designs with Particle Swarm Optimization (PSO)-based approach to achieve broadband absorption and boost the conversion efficiency. It is found that the optimized design with Ti sub-layer improves the CZTS solar cell properties, where it yields 31% improvement in short-circuit current and 60% in the power efficiency over the conventional one. Therefore, the optimized designs provide the opportunity for bridging the gap between improving the optical behavior and reducing the recombination losses.

Design-based modeling of magnetically actuated soft diaphragm materials

NASA Astrophysics Data System (ADS)

Jayaneththi, V. R.; Aw, K. C.; McDaid, A. J.

2018-04-01

Magnetic polymer composites (MPC) have shown promise for emerging biomedical applications such as lab-on-a-chip and implantable drug delivery. These soft material actuators are capable of fast response, large deformation and wireless actuation. Existing MPC modeling approaches are computationally expensive and unsuitable for rapid design prototyping and real-time control applications. This paper proposes a macro-scale 1-DOF model capable of predicting force and displacement of an MPC diaphragm actuator. Model validation confirmed both blocked force and displacement can be accurately predicted in a variety of working conditions i.e. different magnetic field strengths, static/dynamic fields, and gap distances. The contribution of this work includes a comprehensive experimental investigation of a macro-scale diaphragm actuator; the derivation and validation of a new phenomenological model to describe MPC actuation; and insights into the proposed model’s design-based functionality i.e. scalability and generalizability in terms of magnetic filler concentration and diaphragm diameter. Due to the lumped element modeling approach, the proposed model can also be adapted to alternative actuator configurations, and thus presents a useful tool for design, control and simulation of novel MPC applications.