Vocational Identity: It's about Working at Becoming

ERIC Educational Resources Information Center

Armishaw, David D.

2007-01-01

This article focuses on how a worker's relationship with either a place of work or employer--or with what the skilled worker does very well--contributes to very different forms of work identity. Work identity that reflects a determination on the employee's part to commit to the values of the work group is vocational identity, which is important…

Performance analysis of the incremental sheet forming on PMMA using a combined chemical and mechanical approach

NASA Astrophysics Data System (ADS)

Conte, R.; Gagliardi, F.; Ambrogio, G.; Filice, F.; Russo, P.

2017-10-01

Single Point Incremental Forming (SPIF) has been widely investigated highlighting advantages as low-cost, higher formability and greater process flexibility if compared to traditional processes [1]. Recent works have proven the SPIF feasibility for polymers processing. Experimental researches have been carried out with the aim to investigate the influence of several working variables, i.e. spindle speed, tool diameter, step depth, etc., on the final quality of the formed parts [2, 3]. The processed thermoplastic materials are characterized by glass temperatures close to the room temperature and, therefore, SPIF has been performed without external thermal source, exploiting mostly the friction heat generated during the forming phases. In the proposed work, the attention has been focused on extruded poly(methyl methacrylate) (PMMA) sheets, which are characterized by a glass temperature of more than 100 °C. Because of that, an experimental equipment has been designed and the PMMA sheets have been placed on the top of chamber with controlled temperature before SPIF beginning. The temperature on the upper face of the sheets has been monitored by thermocamera, which has been properly set by matching its readings with the ones extracted by a thermocouple in contact with the sheets. SPIF at different temperatures has been carried out by changing both the heater temperature and the process parameters which have an influence on the workpiece heating. The influence of the highlighted process conditions on the worked parts and on the process feasibility has been investigated. Furthermore, examinations on the quality of the formed parts have been performed pointing out the effects that different process conditions have on surface integrity.

46 CFR 160.053-1 - Applicable specifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic Foam § 160.053-1 Applicable... plastic foam work vests are manufactured, form a part of this subpart: (1) Military specification: MIL-L-17653A—Life Preserver, Vest, Work Type, Unicellular Plastic. (2) [Reserved] (b) Copies on file. Copies of...

46 CFR 160.053-1 - Applicable specifications.

Code of Federal Regulations, 2013 CFR

2013-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic Foam § 160.053-1 Applicable... plastic foam work vests are manufactured, form a part of this subpart: (1) Military specification: MIL-L-17653A—Life Preserver, Vest, Work Type, Unicellular Plastic. (2) [Reserved] (b) Copies on file. Copies of...

46 CFR 160.053-1 - Applicable specifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic Foam § 160.053-1 Applicable... plastic foam work vests are manufactured, form a part of this subpart: (1) Military specification: MIL-L-17653A—Life Preserver, Vest, Work Type, Unicellular Plastic. (2) [Reserved] (b) Copies on file. Copies of...

Working Memory Capacity and Categorization: Individual Differences and Modeling

ERIC Educational Resources Information Center

Lewandowsky, Stephan

2011-01-01

Working memory is crucial for many higher-level cognitive functions, ranging from mental arithmetic to reasoning and problem solving. Likewise, the ability to learn and categorize novel concepts forms an indispensable part of human cognition. However, very little is known about the relationship between working memory and categorization, and…

46 CFR 160.053-1 - Applicable specifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... plastic foam work vests are manufactured, form a part of this subpart: (1) Military specification: MIL-L-17653A—Life Preserver, Vest, Work Type, Unicellular Plastic. (2) [Reserved] (b) Copies on file. Copies of...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Work Vests, Unicellular Plastic Foam § 160.053-1 Applicable...

Hot forming of composite prepreg : Experimental study

NASA Astrophysics Data System (ADS)

Tardif, Xavier; Duthille, Bertrand; Bechtel, Stephane; le Pinru, Louis; Campagne, Benjamin; Destombes, Gautier; Deshors, Antoine; Marchand, Christophe; Azzouzi, Khalid El; Moro, Tanguy

2017-10-01

The hot forming of thermoset prepreg consists in bending an uncured composite part by applying a mechanical constrain on the hot laminate. Most of the time, the mold is inserted in a vacuum box and the mechanical constrain is applied on the composite laminate by a single membrane or a double-membrane. But the performance improvement products resulted in forming increasingly complex parts with advanced materials having a less formability. These new complex parts require a finer comprehension of the process and an optimization of the key parameters to get acceptable quality. In this work, an experimental study has been carried out to identify the process conditions that do not lead to unacceptable defaults: undulations of fibers. In the present study, downward-bending has been evaluated with an original light mechanical forming concept, for a given stacking sequence. The influence of the part's temperature and the part's bending speed are investigated. To carry this study out, a hot forming test bench has been designed and manufactured to have a precise supervision of the process conditions. It is able to bend parts of 1500 mm length x 600 mm width x 20 mm thick.

Views of UK medical graduates about flexible and part-time working in medicine: a qualitative study.

PubMed

Evans, J; Goldacre, M J; Lambert, T W

2000-05-01

To report on the views of doctors about flexible and part-time working in medicine. As part of ongoing studies of doctors' careers, postal questionnaires were sent in 1995 and 1996 to all doctors who qualified from UK medical schools in 1977, 1988 and 1993. Structured questions about recipients' careers were accompanied by a form which invited free-text comment. Comments about flexible and part-time working were extracted for analysis. All respondents who commented on flexible and part-time working. Most doctors who commented believed there were insufficient opportunities to meet demand. They also commonly commented that there was not enough information about flexible training opportunities. Some men, as well as women, expressed a wish to work part-time. The most frequently cited reasons for part-time working were to balance career with family responsibilities, and to reduce work-related stress. Cited disadvantages of part-time working were mainly financial and included the problems of paying for childcare and professional subscriptions when on a reduced income. Some respondents perceived negative attitudes towards doctors in part-time jobs. It is well-recognised that more flexible medical career structures are needed so that doctors can vary their time commitment according to their needs at particular stages in their lives. Until recently, needs have not been adequately met. Changes in arrangements for flexible training accompanying the implementation of the specialist registrar grade may have begun to alleviate some of the problems, but others, such as negative attitudes towards part-time work, may take time to change.

The 'realities' of part-time nursing: a grounded theory study.

PubMed

Jamieson, Lynn N; Williams, Leonie Mosel; Lauder, William; Dwyer, Trudy

2008-10-01

To develop a theory that explains the 'realities' of part-time nursing. While little is known about the phenomenon of part-time nursing, increasing numbers of nurses work in part-time employment. Grounded theory. The problem that part-time nurses shared was an inability to achieve their personal optimal nursing potential. Motivators to work part-time, employment hours, specialty, individual and organizational factors formed contextual conditions that led to this problem. Part-time nurses responded to the challenges through a process of adaptation and adjustment. Harnessing the full productive potential of part-time nurses requires support to limit the difficulties that they encounter. The developed theory provides a valuable guide to managerial action. Nurse Managers need to consider the developed substantive theory when planning and managing nursing workforces.

Classification and New Forms of Work Organisation: What Links Are Possible?

ERIC Educational Resources Information Center

Colin, Thierry; Grasser, Benoit

1995-01-01

Using various types of businesses--furniture makers, car parts suppliers, paper mills, and food and steel industries--the various ways work is classified are illustrated. The ways classification is used for organizational learning and change are demonstrated. (SK)

Anaphoric Descriptions

ERIC Educational Resources Information Center

Beller, Charley

2013-01-01

The study of definite descriptions has been a central part of research in linguistics and philosophy of language since Russell's seminal work "On Denoting" (Russell 1905). In that work Russell quickly dispatches analyses of denoting expressions with forms like "no man," "some man," "a man," and "every…

A numerical analysis on forming limits during spiral and concentric single point incremental forming

NASA Astrophysics Data System (ADS)

Gipiela, M. L.; Amauri, V.; Nikhare, C.; Marcondes, P. V. P.

2017-01-01

Sheet metal forming is one of the major manufacturing industries, which are building numerous parts for aerospace, automotive and medical industry. Due to the high demand in vehicle industry and environmental regulations on less fuel consumption on other hand, researchers are innovating new methods to build these parts with energy efficient sheet metal forming process instead of conventionally used punch and die to form the parts to achieve the lightweight parts. One of the most recognized manufacturing process in this category is Single Point Incremental Forming (SPIF). SPIF is the die-less sheet metal forming process in which the single point tool incrementally forces any single point of sheet metal at any process time to plastic deformation zone. In the present work, finite element method (FEM) is applied to analyze the forming limits of high strength low alloy steel formed by single point incremental forming (SPIF) by spiral and concentric tool path. SPIF numerical simulations were model with 24 and 29 mm cup depth, and the results were compare with Nakajima results obtained by experiments and FEM. It was found that the cup formed with Nakajima tool failed at 24 mm while cups formed by SPIF surpassed the limit for both depths with both profiles. It was also notice that the strain achieved in concentric profile are lower than that in spiral profile.

40 CFR 463.1 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY General Provisions § 463.1 Applicability. (a) This part applies to any plastics molding and forming process that discharges or may discharge pollutants to waters of the United States or that introduces pollutants into a publicly owned treatment works. Plastics...

A novel methodology for in-process monitoring of flow forming

NASA Astrophysics Data System (ADS)

Appleby, Andrew; Conway, Alastair; Ion, William

2017-10-01

Flow forming (FF) is an incremental cold working process with near-net-shape forming capability. Failures by fracture due to high deformation can be unexpected and sometimes catastrophic, causing tool damage. If process failures can be identified in real time, an automatic cut-out could prevent costly tool damage. Sound and vibration monitoring is well established and commercially viable in the machining sector to detect current and incipient process failures, but not for FF. A broad-frequency microphone was used to record the sound signature of the manufacturing cycle for a series of FF parts. Parts were flow formed using single and multiple passes, and flaws were introduced into some of the parts to simulate the presence of spontaneously initiated cracks. The results show that this methodology is capable of identifying both introduced defects and spontaneous failures during flow forming. Further investigation is needed to categorise and identify different modes of failure and identify further potential applications in rotary forming.

Vocational Education and Training in Sweden.

ERIC Educational Resources Information Center

Abrahamsson, Kenneth

Rather than a distinct vocational education and training (VET) system, Swedish institutions include VET as part of an educational philosophy stressing equity, integration, and comprehensiveness. The VET system forms part of a comprehensive model of education stressing active citizenship, work life orientation, and preparation for further studies.…

Living and Working in Space: A History of Skylab.

ERIC Educational Resources Information Center

Compton, W. David; Benson, Charles D.

The history of the National Aeronautics and Space Administration Skylab program is provided in this three-part book. Part I (chapters 1 to 5) traces the origins of the Skylab concept from its emergence in the period 1962-65 through its evolution into final form in 1969. Part II (chapters 6 to 13) focuses on the period from 1969-73, considering the…

Forming Limit Diagram of Titanium and Stainless Steel Alloys to Study the Formability of Hydro-Mechanical Deep Drawing Parts

NASA Astrophysics Data System (ADS)

Shirizly, A.

2005-08-01

The increase demand for stronger, lighter and economic sheet metal products, make the Hydromecanical deep drawing process lately more and more popular. The Hydromecanical process is used in almost all types of sheet metal parts from home appliances and kitchenware to automotive and aviation industries. Therefore, many common materials were tested and characterized by their ability to sustain large strains via the well known Forming Limit Diagram (FLD). The aim of this work is to examine the forming capability if the Hydromecanical process in production of hemisphere parts made of materials commonly used in the aviation and aerospace industries. Experimental procedures were carried out to assess their ductility through FLD and the Forming Limit Carve (FLC).Two type of material sheets were tested herewith for demonstrating the procedure: commercial pure titanium and stainless steel 316L. A numerical simulation of the Hydromecanical process was examined and compared to self made Hydromecanical deep drawing of hemispherical parts.

Application of magnetic pulse forming to aeronautic small pieces

NASA Astrophysics Data System (ADS)

Sow, C.; Bazin, G.; Daniel, D.; Bon, E.; Priem, D.; Racineux, G.

2018-05-01

Stelia Aerospace company is specialized in the forming of small (Lmax <200 mm), medium (200 mm 1000 mm) sheets for the aerospace industry. In order to diversify the production facilities of Stelia Aerospace we evaluated the capacity of the magnetic pulse forming to produce small parts. The material used is the aluminum alloy 2024-T4. The sheets used have a thickness of 1 mm, 2 mm and 1.6 mm. Stelia Aerospace manufactures more than 100 different small parts but they are all made up of a limited set of elementary geometries. These elementary geometries include: straight and interrupted straight fallen edges, concave and convex fallen edges, fallen edges holes and joggling. In this paper we present the work we have done to develop forming tools for one of these elementary geometries, the straight fallen edge. Special attention is paid to the geometric and metallurgic quality of parts. In order to evaluate dimensional reproducibility of the process, smalls series of parts were produced.

77 FR 6803 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-09

... report, ``Hidden Tragedy: Underreporting of Workplace Injuries and Illnesses,'' indicating ``that work....'' Based in part on the report's results, Congress allocated funds for NIOSH to conduct a follow-up study using NIOSH's occupational supplement to the National Electronic Injury Surveillance System (NEISS-Work...

Design of fabric preforms for double diaphragm forming

NASA Technical Reports Server (NTRS)

Luby, Steven; Bernardon, Edward

1992-01-01

Resin Transfer Molding (RTM) has the potential of becoming one of the most cost effective ways of producing composite structures since the raw materials used, resin and dry fabric, are less costly than prepregs. Unfortunately these low material costs are offset by the high labor costs incurred to layup the dry fabric into 3D shapes. To reduce the layup costs, double diaphragm forming is being investigated as a potential technique for creating a complex 3D preform from a simple flat layup. As part of our effort to develop double diaphragm forming into a production capable process, we have undertaken a series of experiments to investigate the interactions between process parameters, mold geometry, fabric weave, tow size, and the quality of the formed part. The results of these tests will be used to determine the forming geometry limitations of double diaphragm forming and to characterize the formability of fabric configurations. An important part of this work was the development of methods to measure and analyze fiber orientations, deformation angles, tow spreading, and shape conformation of the formed parts. This paper will describe the methods used to mark plies, the double diaphragm forming process, the techniques used to measure the formed parts, and the calculation of the parameters of interest. The results can be displayed as 3D contour plots. These experimental results have also been used to verify and improve a computer model which simulates the draping of fabrics over 3D mold shapes.

Working to Make It Work: The Role of Parents in the Youth Mentoring Process

ERIC Educational Resources Information Center

Spencer, Renee; Basualdo-Delmonico, Antoinette; Lewis, Terrence O.

2011-01-01

Theoretical and empirical work on youth mentoring relationships has been largely focused on the mentor-youth dyad, with little attention to the larger context within which such relationships form and develop. The perspectives of parents have been absent for the most part from the mentoring literature to date. In-depth, semistructured, qualitative…

Mapping the Educational Work of Governesses on Australia's Remote Stations

ERIC Educational Resources Information Center

Newman, Sally

2014-01-01

This article is about the educational work of governesses on Australia's remote cattle and sheep stations. These stations occupy vast tracts of land in the outback, and form part of global food supply chains exporting meat to countries around the world. The article explores the nature of governesses' work, the boundaries they negotiate to perform…

Toward Solutions: The Work of the Biology Action-Research Group. Learning in Science Project. Working Paper No. 29.

ERIC Educational Resources Information Center

Boe, Robyn; And Others

Many students, even after formal science instruction, have not developed a scientifically acceptable concept of "living,""animal," or "plant." Therefore, as part of the action-research phase of the Learning in Science Project, a working group was formed to explore (with teachers) some possible strategies aimed at…

BRAC/Job Corps Clerical Training Program.

ERIC Educational Resources Information Center

Brotherhood of Railway, Airline and Steamship Clerks, Freight Handlers, Express and Station Employees.

The Brotherhood of Railway and Airline Clerks (BRAC) Railroad Clerical Program contains two main parts. The first part deals with the railroad industry and provides: an outline of basic railroad history, a glossary of railroad terms, a description of the kinds of work done in railroad offices, sample forms used in the railroad industry,…

Evidence for Structural Alignment during Similarity Judgments.

ERIC Educational Resources Information Center

Markman, Arthur B.; Gentner, Dedre

Similarity plays a central role in cognitive theories. Research has demonstrated that the similarity of a pair increases with its commonalities and decreases with its differences. These common and distinctive elements can take the form of parts of objects, relations between parts of properties of whole objects. Previous work has been unable to…

Systems Approach in Landscape Design: A Studio Work

ERIC Educational Resources Information Center

Alpak, Elif Merve; Özkan, Doruk Görkem; Düzenli, Tugba

2018-01-01

Landscape architects design the environment, which is an organic part, an outdoor extension of the building, according to the various functions of buildings. One of the most important objectives in design is to create a strong organization which forms a whole by combining different parts. While creating this organization, it is essential to…

Urethane/Silicone Adhesives for Bonding Flexing Metal Parts

NASA Technical Reports Server (NTRS)

Edwards, Paul D.

2004-01-01

Adhesives that are blends of commercially available urethane and silicone adhesives have been found to be useful for bonding metal parts that flex somewhat during use. These urethane/silicone adhesives are formulated for the specific metal parts to be bonded. The bonds formed by these adhesives have peel and shear strengths greater than those of bonds formed by double-sided tapes and by other adhesives, including epoxies and neat silicones. In addition, unlike the bonds formed by epoxies, the bonds formed by these adhesives retain flexibility. In the initial application for which the urethane/silicone adhesives were devised, there was a need to bond spring rings, which provide longitudinal rigidity for inflatable satellite booms, with the blades that provide the booms axial strength. The problem was to make the bonds withstand the stresses, associated with differences in curvature between the bonded parts, that arose when the booms were deflated and the springs were compressed. In experiments using single adhesives (that is, not the urethane/ silicone blends), the bonds were broken and, in each experiment, it was found that the adhesive bonded well with either the ring or with the blade, but not both. After numerous experiments, the adhesive that bonded best with the rings and the adhesive that bonded best with the blades were identified. These adhesives were then blended and, as expected, the blend bonded well with both the rings and the blades. The two adhesives are Kalex (or equivalent) high-shear-strength urethane and Dow Corning 732 (or equivalent) silicone. The nominal mixture ratio is 5 volume parts of the urethane per 1 volume part of the silicone. Increasing the proportion of silicone makes the bond weaker but more flexible, and decreasing the proportion of silicone makes the bond stronger but more brittle. The urethane/silicone blend must be prepared and used quickly because of the limited working time of the urethane: The precursor of the urethane adhesive is supplied in a two-part form, comprising a resin and a hardener that must be mixed. The resulting urethane adhesive has a working time of 3 to 5 minutes. To prepare the urethane/silicone blend, one must quickly add the silicone to the urethane adhesive and mix it in thoroughly within the working time of the urethane. Once the urethane/silicone blend has been mixed and applied to the bond surfaces, it takes about 2 hours for the adhesive to cure under pressure. However, it takes about 24 hours for the adhesive to reach full strength.

Structural investigation of a new composite process

NASA Astrophysics Data System (ADS)

Mayer, Philippe; Becker, Eric; Bigot, Régis; Kaïci, Bruno

2017-10-01

This work presents a study done on a new patented forming process, created to produce massive composite parts used for structural applications in automotive and aeronautics industries. The study presented in this paper deals with an experimental setup, used to characterize thick composite cylinders. The author presents the characterization of these cylinders and a new analysis method, in order to understand the consolidation steps of the composite in this forming process. The structural health of the part is illustrated by the analysis of the intra-bundle and inter-bundle porosities, by micrographs characterizations.

An Investigation and Prediction of Springback of Sheet Metals under Cold Forming Condition

NASA Astrophysics Data System (ADS)

Elsayed, A.; Mohamed, M.; Shazly, M.; Hegazy, A.

2017-12-01

Low formability and springback especially at room temperature are known to be major obstacles to advancements in sheet metal forming industries. The integration of numerical simulation within the R&D activities of the automotive industries provides a significant development in overcoming these drawbacks. The aim of the present work is to model and predict the springback of a Galvanized low carbon steel automotive panel part. This part suffers from both positive and negative springback which physically measured using CMM. The objective is to determine the suitable forming process parameters that minimize and compensate the springback through robust FE model. The analysis of the springback was carried out following (Isotropic model and Yoshida - Uemori model) which are calibrated through cyclic stress strain curve. The material data of the Galvanized low carbon steel was implemented via lookup tables in the commercial finite element software Pam-Stamp(TM). Firstly, the FE model was validated using the deformed part which suffers from springback problem at the same forming condition. The FE results were compared with the measured experimental trails providing very good agreement. Secondly, the validated FE model was used to determine the suitable forming parameters which could minimise the springback of the deformed part.

AISI/DOE Technology Roadmap Program: Cold Work Embrittlement of Interstitial Free Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

John T Bowker; Pierre Martin

2002-10-31

This work addresses the issues of measurement of secondary cold work embrittlement (SCWE) of an IF steel in deep-drawn parts using laboratory tests, and its correlation with real part fracture. It aimed at evaluating the influence of the steel chemistry and processing condition, microstructure, and test conditions, on SCWE as well as the effect of SCWE on fatigue properties. Size 6-in. cups produced with various draw ratios or trimmed at different heights were tested to determine the ductile-to-brittle-transition temperature (DBTT) as a function of strain. The 2-in. cup/expansion test, bend test and fracture of notched specimens were also used tomore » generate information complementary to that provided by the 6-inch cup/expansion test. The relationship between laboratory tests and fracture in real parts was established by testing large-scale parts. The fatigue behavior was investigated in the as-rolled and deep drawn (high stain) conditions, using prestrained specimens taken from the wall of a formed part.« less

Nonlinear effects in a plain journal bearing. I - Analytical study. II - Results

NASA Technical Reports Server (NTRS)

Choy, F. K.; Braun, M. J.; Hu, Y.

1991-01-01

In the first part of this work, a numerical model is presented which couples the variable-property Reynolds equation with a rotor-dynamics model for the calculation of a plain journal bearing's nonlinear characteristics when working with a cryogenic fluid, LOX. The effects of load on the linear/nonlinear plain journal bearing characteristics are analyzed and presented in a parametric form. The second part of this work presents numerical results obtained for specific parametric-study input variables (lubricant inlet temperature, external load, angular rotational speed, and axial misalignment). Attention is given to the interrelations between pressure profiles and bearing linear and nonlinear characteristics.

Teaching on the Margins: Tutors, Discourse and Pedagogy in Work-Based Learning for Young People

ERIC Educational Resources Information Center

Thompson, Ron

2010-01-01

This paper presents research findings on practitioners working with young people on Entry to Employment (E2E) programmes in the north of England. E2E continues a long tradition of work-related learning for unemployed school leavers for whom other forms of education or training are deemed unsuitable, and is part of the UK government's strategy for…

Federal Work-Study: Past Its Prime, or Ripe for Renewal? Evidence Speaks Reports, Vol 2, #16

ERIC Educational Resources Information Center

Scott-Clayton, Judith

2017-01-01

The Federal Work-Study program was introduced as part of the Economic Opportunity Act of 1964, with the goal of enabling low-income students to work their way through college. It is thus one of the earliest forms of federal financial aid for college, pre-dating both Pell Grants and Stafford Loans. Since its inception, FWS has provided institutions…

How to Get Published, Part I

ERIC Educational Resources Information Center

Lonergan, David

2011-01-01

Some librarians are required to publish a certain amount as part of earning tenure. Some choose to do research and write articles as a form of self-expression, because of intellectual curiosity, or perhaps to justify bearing faculty status. For whatever reason(s) librarians might want (or need) to see their own work in print, this article offers…

Preventing Growth Of Barnacles On Propellers

NASA Technical Reports Server (NTRS)

Parrish, Kemp L.

1993-01-01

Possible to prevent barnacles and other marine life from obtaining firm bonds on propellers and other metal parts by coating parts with NEDOX (or equivalent) cavitation-resistant material. Available in several forms; one that works best is mold-release coating. Also provides improved surface hardness, protection against electrolysis, better resistance to abrasion, and less friction between propellers and water.

46 CFR 160.043-4 - Construction and workmanship.

Code of Federal Regulations, 2011 CFR

2011-10-01

... shall have a common nail nick on one side. Before assembling, the sides of the tang shall be uniformly... formed to obtain a smooth cutting action. It shall have a common nail nick on one side, and the extreme... buffed, and the metal parts polished uniformly. The working parts shall be cleaned and oiled with a good...

46 CFR 160.043-4 - Construction and workmanship.

Code of Federal Regulations, 2010 CFR

2010-10-01

... shall have a common nail nick on one side. Before assembling, the sides of the tang shall be uniformly... formed to obtain a smooth cutting action. It shall have a common nail nick on one side, and the extreme... buffed, and the metal parts polished uniformly. The working parts shall be cleaned and oiled with a good...

Managing EEE part standardisation and procurement

NASA Astrophysics Data System (ADS)

Serieys, C.; Bensoussan, A.; Petitmangin, A.; Rigaud, M.; Barbaresco, P.; Lyan, C.

2002-12-01

This paper presents the development activities in space components selection and procurement dealing with a new data base tool implemented at Alcatel Space using TransForm softwaa re configurator developed by Techform S.A. Based on TransForm, Access Ingenierie has devv eloped a software product named OLG@DOS which facilitate the part nomenclatures analyses for new equipment design and manufacturing in term of ACCESS data base implementation. Hi-Rel EEE part type technical, production and quality information are collected and compiled usingproduction data base issued from production tools implemented for equipment definition, description and production based on Manufacturing Resource Planning (MRP II Control Open) and Parametric Design Manager (PDM Work Manager). The analysis of any new equipment nomenclature may be conducted through this means for standardisation purpose, cost containment program and management procurement activities as well as preparation of Component reviews as Part Approval Document and Declared Part List validation.

Testing single point incremental forming moulds for rotomoulding operations

NASA Astrophysics Data System (ADS)

Afonso, Daniel; de Sousa, Ricardo Alves; Torcato, Ricardo

2017-10-01

Low pressure polymer processes as thermoforming or rotational moulding use much simpler moulds than high pressure processes like injection. However, despite the low forces involved in the process, moulds manufacturing for these applications is still a very material, energy and time consuming operation. Particularly in rotational moulding there is no standard for the mould manufacture and very different techniques are applicable. The goal of this research is to develop and validate a method for manufacturing plastically formed sheet metal moulds by single point incremental forming (SPIF) for rotomoulding and rotocasting operations. A Stewart platform based SPIF machine allow the forming of thick metal sheets, granting the required structural stiffness for the mould surface, and keeping a short manufacture lead time and low thermal inertia. The experimental work involves the proposal of a hollow part, design and fabrication of a sheet metal mould using dieless incremental forming techniques and testing its operation in the production of prototype parts.

Where the Butterfly Alights: The Global Location of eWork. EMERGENCE. IES Report 378.

ERIC Educational Resources Information Center

Huws, U.; Jagger, N.; Bates, P.

This study forms part of the EMERGENCE project, which is designed to measure and map information and communications technology-related employment (eWork) relocation on a global level. Information collected by Eurostat and the United Kingdom Labour Force Survey were the primary sources of data analyzed. Twelve factors identified as influencing…

Influences of Marriage, Motherhood, and Other Life Events on Australian Women's Employment Aspirations

ERIC Educational Resources Information Center

Johnstone, Melissa; Lucke, Jayne; Lee, Christina

2011-01-01

The study contributes to the understandings of how women negotiate work and family over the life course by investigating what factors impact young women's aspirations for full time, part-time, and other forms of work. Using data from the Australian Longitudinal Study on Women's Health (ALSWH) with its nationally representative sample of Australian…

Predicting, Measuring, and Monitoring Aquatic Invertebrate Biodiversity on Dryland Military Bases

DTIC Science & Technology

2016-12-15

PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Oregon State University...Corvallis; 8. PERFORMING ORGANIZATION REPORT NUMBER University of Washington, Seattle University of Florida, Gainesville...part of this biodiversity and form a critical part of the food web that sustains aquatic, riparian, and terrestrial organisms , including Federally

Methods and Algorithms for Computer-aided Engineering of Die Tooling of Compressor Blades from Titanium Alloy

NASA Astrophysics Data System (ADS)

Khaimovich, A. I.; Khaimovich, I. N.

2018-01-01

The articles provides the calculation algorithms for blank design and die forming fitting to produce the compressor blades for aircraft engines. The design system proposed in the article allows generating drafts of trimming and reducing dies automatically, leading to significant reduction of work preparation time. The detailed analysis of the blade structural elements features was carried out, the taken limitations and technological solutions allowed to form generalized algorithms of forming parting stamp face over the entire circuit of the engraving for different configurations of die forgings. The author worked out the algorithms and programs to calculate three dimensional point locations describing the configuration of die cavity.

Comparative analysis of JKR Sarawak form of contract and Malaysia Standard form of building contract (PWD203A)

NASA Astrophysics Data System (ADS)

Yunus, A. I. A.; Muhammad, W. M. N. W.; Saaid, M. N. F.

2018-04-01

Standard form of contract is normally being used in Malaysia construction industry in establishing legal relation between contracting parties. Generally, most of Malaysia federal government construction project used PWD203A which is a standard form of contract to be used where Bills of Quantities Form Part of the Contract and it is issued by Public Works Department (PWD/JKR). On the other hand in Sarawak, the largest state in Malaysia, the state government has issued their own standard form of contract namely JKR Sarawak Form of Contract 2006. Even both forms have been used widely in construction industry; there is still lack of understanding on both forms. The aim of this paper is to identify significant provision on both forms of contract. Document analysis has been adopted in conducting an in-depth review on both forms. It is found that, both forms of contracts have differences and similarities on several provisions specifically matters to definitions and general; execution of the works; payments, completion and final account; and delay, dispute resolution and determination.

What happened after the evaluation?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C L

1999-03-12

An ergonomics program including a ergonomic computer workstation evaluations at a research and development facility was assessed three years after formal implementation. As part of the assessment, 53 employees who had been subjects of computer workstation evaluations were interviewed. The documented reports (ergonomic evaluation forms) of the ergonomic evaluations were used in the process of selecting the interview subjects. The evaluation forms also provided information about the aspects of the computer workstation that were discussed and recommended as part of the evaluation, although the amount of detail and completeness of the forms varied. Although the results were mixed and reflectivemore » of the multivariate psychosocial factors affecting employees working in a large organization, the findings led to recommendations for improvements of the program.« less

Coupled oscillators: interesting experiments for high school students

NASA Astrophysics Data System (ADS)

Kodejška, Č.; Lepil, O.; Sedláčková, H.

2018-07-01

This work deals with the experimental demonstration of coupled oscillators using simple tools in the form of mechanical coupled pendulums, magnetically coupled elastic strings or electromagnetic oscillators. For the evaluation of results the data logger Lab Quest Vernier and video analysis in the Tracker program were used. In the first part of this work, coupled mechanical oscillators of different types are shown and the data analysis by the Tracker or Vernier Logger Pro programs. The second part describes a measurement using two LC circuits with inductively or capacitive coupled electromagnetic oscillators and the obtained experimental results.

Autography as auto-therapy: psychic pain and the graphic memoir.

PubMed

Williams, Ian

2011-12-01

Over the last three decades, the graphic novel has developed both in sophistication and cultural importance, now being widely accepted as a unique form of literature (Versaci 2007). Autobiography has proved to be a successful genre within comics (the word is used in the plural to denote both the medium and the philosophy of the graphic form) and within this area a sub-genre, the memoir of the artist's own disease or suffering, sometimes known as the graphic pathology, has arisen (Green and Myers 2010). Storytelling and healing have been linked since ancient times, and the disclosure of ones story forms part of the psychotherapeutic treatment of trauma (Herman 1997). This paper will examine, in both graphic and textual form, whether, among the myriad reasons that one might embark upon the labour intensive work of making a graphic memoir, some artists might be seeking some form of healing or catharsis through their work.

CAD system of design and engineering provision of die forming of compressor blades for aircraft engines

NASA Astrophysics Data System (ADS)

Khaimovich, I. N.

2017-10-01

The articles provides the calculation algorithms for blank design and die forming fitting to produce the compressor blades for aircraft engines. The design system proposed in the article allows generating drafts of trimming and reducing dies automatically, leading to significant reduction of work preparation time. The detailed analysis of the blade structural elements features was carried out, the taken limitations and technological solutions allowed forming generalized algorithms of forming parting stamp face over the entire circuit of the engraving for different configurations of die forgings. The author worked out the algorithms and programs to calculate three dimensional point locations describing the configuration of die cavity. As a result the author obtained the generic mathematical model of final die block in the form of three-dimensional array of base points. This model is the base for creation of engineering documentation of technological equipment and means of its control.

ICT and Initial Teacher Education: National Policies. OECD Education Working Papers, Number 61

ERIC Educational Resources Information Center

Rizza, Caroline

2011-01-01

This working paper aims to give an overview of the national policies that exist in the field of information and communication technology (ICT) and initial teacher education. Information on this topic was initially gathered via a survey, in the form of a country questionnaire, which was conducted as part of the analytical strand of the the…

Education, Training and the Future of Work I: Social, Political and Economic Contexts of Policy Development.

ERIC Educational Resources Information Center

Ahier, John, Ed.; Esland, Geoff, Ed.

This first of two volumes is organized around the theme of the social, political, and economic contexts of education and training. (Volume II focuses on the development of vocational policy. Both volumes form part of the Open University MA Module, Education, Training, and the Future of Work.) An introduction (Geoff Esland, John Ahier) provides an…

Repurposing with a Purpose: A Story with a Happy Ending

ERIC Educational Resources Information Center

Greaves, Lyn; Roller, Sibel; Bradley, Claire

2010-01-01

The work reported here forms part of a UK Joint Information Systems Committee (JISC) funded project (BL4ACE) (http://bl4ace.tvu.ac.uk/). This project built on previous work that evaluated the effectiveness of a learning design to underpin academic competence in a Business Studies degree. A significant concern of the blended learning design was to…

Additive Manufacturing of Molds for Fabrication of Insulated Concrete Block

DOE Office of Scientific and Technical Information (OSTI.GOV)

Love, Lonnie J.; Lloyd, Peter D.

ORNL worked with concrete block manufacturer, NRG Insulated Block, to demonstrate additive manufacturing of a multi-component block mold for its line of insulated blocks. Solid models of the mold parts were constructed from existing two-dimensional drawings and the parts were fabricated on a Stratasys Fortus 900 using ULTEM 9085. Block mold parts were delivered to NRG and installed on one of their fabrication lines. While form and fit were acceptable, the molds failed to function during NRG’s testing.

Investigation of holder pressure and size effects in micro deep drawing of rectangular work pieces driven by piezoelectric actuator.

PubMed

Aminzahed, Iman; Mashhadi, Mahmoud Mosavi; Sereshk, Mohammad Reza Vaziri

2017-02-01

Micro forming is a manufacturing process to fabricate micro parts with high quality and a cost effective manner. Deep drawing could be a favorable method for production of complicated parts in macro and micro sizes. In this paper piezoelectric actuator is used as a novel approach in the field of micro manufacturing. Also, in current work, investigations are conducted with four rectangular punches and blanks with various thicknesses. Blank holder pressure effects on thickness distributions, punch force, and springback are studied. According to the results of this work, increasing of blank holder pressure in scaled deep drawing, in contrast to thickness of drawn part, leads to decrease in the punch forces and springback. Furthermore, it is shown that in micro deep drawing, the effects of holder pressure on mentioned parameters can be ignored. Copyright © 2016 Elsevier B.V. All rights reserved.

Economically effective material forms for composites

NASA Astrophysics Data System (ADS)

Woolstencroft, Dave

This paper will consider advanced composites and the new degrees of freedom that are available to the composites engineer to be able to make parts that combine both an economic performance superior to existing systems, with no additional production investment, and high mechanical property translations. This unique advantage comes about through some pioneering and innovative work in the different forms of material into which the reinforcing fibers can be configured. The presentation will highlight the unique advantages and show a pioneering aerostructural application of this material form.

Anisotropy of Photopolymer Parts Made by Digital Light Processing

PubMed Central

Monzón, Mario; Ortega, Zaida; Hernández, Alba; Paz, Rubén; Ortega, Fernando

2017-01-01

Digital light processing (DLP) is an accurate additive manufacturing (AM) technology suitable for producing micro-parts by photopolymerization. As most AM technologies, anisotropy of parts made by DLP is a key issue to deal with, taking into account that several operational factors modify this characteristic. Design for this technology and photopolymers becomes a challenge because the manufacturing process and post-processing strongly influence the mechanical properties of the part. This paper shows experimental work to demonstrate the particular behavior of parts made using DLP. Being different to any other AM technology, rules for design need to be adapted. Influence of build direction and post-curing process on final mechanical properties and anisotropy are reported and justified based on experimental data and theoretical simulation of bi-material parts formed by fully-cured resin and partially-cured resin. Three photopolymers were tested under different working conditions, concluding that post-curing can, in some cases, correct the anisotropy, mainly depending on the nature of photopolymer. PMID:28772426

Method of producing complex aluminum alloy parts of high temper, and products thereof

NASA Technical Reports Server (NTRS)

Wilson, I. J. (Inventor)

1978-01-01

Fully annealed aluminum sheet is first stretch formed to the complex, doubly compound shape of a previously prepared forming die, e.g., an ejection seat blowout panel of a shuttlecraft. The part is then marked with a series of grid lines for monitoring later elongation. Thereafter it is solution heat treated and refrigerated to retard hardening. While still soft, it is stretched a second time on the same die to induce a modicum of work hardening, after which it is aged to the desired stress corrosion resistant temper, preferably the T8 level, to provide the desired hardness and stress corrosion resistance.

Signing on for dirty work: Taking stock of a public psychiatry project from the inside.

PubMed

Pope, Leah G; Cubellis, Lauren; Hopper, Kim

2016-08-01

As applied anthropologists used to working at arm's length from public psychiatry, we step out of the daily grind to take stock of the challenges of taking on ethnography entrained-harnessed to the implementation of a new program. These include the loss of critical distance, the struggles to negotiate locally viable forms of authority and relevance, the necessity of sustaining a Janus-faced relation with principal players, the urgency of seeing time-sensitive information converted into corrective feedback, and the undeniable attraction of being part of "committed work" with game-changing potential. In so doing, we rework the terms of witnessing and revive an old alternative: that documentary dirty work be reclaimed as a variant of public anthropology, one that transforms the work of application from mere afterthought to integral part of the original inquiry. © The Author(s) 2016.

John Dewey: Su filosofia y filosofia de la educacion (John Dewey: His Philosophy and Philosophy of Education). Working Paper.

ERIC Educational Resources Information Center

Zoreda, Margaret Lee

This paper forms part of an investigation about how the philosophy of John Dewey (1859-1952) can illuminate the practice of the teaching of English as a foreign language. The paper seeks to interpret and synthesize John Dewey's philosophical works to construct a "Deweyian lens" with which to analyze and evaluate the field of the teaching…

23 CFR Appendix D to Subpart A of... - Federal-Aid Highway Construction Summary of Employment Data (Form PR-1392)

Code of Federal Regulations, 2011 CFR

2011-04-01

... to be reported should represent the project work force on board in all or any part of the last... journey-level men and women, apprentices, and on-the-job trainees. Staffing figures to be reported in... accounted for. This information will be useful in complying with the U.S. Senate Committee on Public Works...

Brisk Attitude and Optimism: Top Workers' Childhood Experiences Forming the Basis of Success at Work

ERIC Educational Resources Information Center

Uusiautti, Satu; Määttä, Kaarina

2013-01-01

This study focused on the phenomenon of success at work asking whether it would be possible to find factors from top workers' children and school experiences that would explain their later success. This study was a part of a larger research in which Finnish top workers, employees of the year, who have been selected as successful professionals of…

The environmental benefits of bicycling and walking.

DOT National Transportation Integrated Search

1993-01-01

Bicycling and walking are the two major non-fuel-consuming, non-polluting : forms of transportation in the United States. Millions of Americans ride : bicycles and/or walk for a wide variety of purposes --- commuting to work, as : part of their job, ...

Fatigue Risk Management: A Maritime Framework

PubMed Central

Grech, Michelle Rita

2016-01-01

It is evident that despite efforts directed at mitigating the risk of fatigue through the adoption of hours of work and rest regulations and development of codes and guidelines, fatigue still remains a concern in shipping. Lack of fatigue management has been identified as a contributory factor in a number of recent accidents. This is further substantiated through research reports with shortfalls highlighted in current fatigue management approaches. These approaches mainly focus on prescriptive hours of work and rest and include an individualistic approach to managing fatigue. The expectation is that seafarers are responsible to manage and tolerate fatigue as part of their working life at sea. This attitude is an accepted part of a seafarer’s role. Poor compliance is one manifest of this problem with shipboard demands making it hard for seafarers to follow hours of work and rest regulations, forcing them into this “poor compliance” trap. This makes current fatigue management approaches ineffective. This paper proposes a risk based approach and way forward for the implementation of a fatigue risk management framework for shipping, aiming to support the hours of work and rest requirements. This forms part of the work currently underway to review and update the International Maritime Organization, Guidelines on Fatigue. PMID:26840326

Client perceptions of a work rehabilitation programme for women: the Redesigning Daily Occupations (ReDO) project.

PubMed

Wästberg, Birgitta A; Erlandsson, Lena-Karin; Eklund, Mona

2013-03-01

The Redesigning Daily Occupations programme (ReDO) is a Swedish work rehabilitation programme for women on sick leave due to stress-related disorders. The aim of the study was to investigate the participants' perceptions of taking part in the work rehabilitation programme. Seven of the 38 women who completed ReDO were interviewed during and after the programme. The interviews were analysed by manifest and latent content analysis. The informants were satisfied with the content of the programme and the support they received in the programme and when returning to work. The women thought they had become more aware of what they did during a day and how they performed their daily activities, which helped them to change their ways of performing them. The result highlighted different parts of their rehabilitation process which constituted four sub-themes: "Perceptions of the ReDO", "The intrinsic process", "Person-related changes", and "Perceptions of returning to work", and formed the core theme "Critical parts of the rehabilitation process". The findings may not be generalized to other settings and future research should further investigate work rehabilitation for the target group.

Fatigue Risk Management: A Maritime Framework.

PubMed

Grech, Michelle Rita

2016-01-29

It is evident that despite efforts directed at mitigating the risk of fatigue through the adoption of hours of work and rest regulations and development of codes and guidelines, fatigue still remains a concern in shipping. Lack of fatigue management has been identified as a contributory factor in a number of recent accidents. This is further substantiated through research reports with shortfalls highlighted in current fatigue management approaches. These approaches mainly focus on prescriptive hours of work and rest and include an individualistic approach to managing fatigue. The expectation is that seafarers are responsible to manage and tolerate fatigue as part of their working life at sea. This attitude is an accepted part of a seafarer's role. Poor compliance is one manifest of this problem with shipboard demands making it hard for seafarers to follow hours of work and rest regulations, forcing them into this "poor compliance" trap. This makes current fatigue management approaches ineffective. This paper proposes a risk based approach and way forward for the implementation of a fatigue risk management framework for shipping, aiming to support the hours of work and rest requirements. This forms part of the work currently underway to review and update the International Maritime Organization, Guidelines on Fatigue.

Microphysical Characteristics of Tropical Clouds

NASA Technical Reports Server (NTRS)

Grainger, Cedric A.; Anderson, Nicholas

2004-01-01

This report summarizes the analysis of data collected by the University of North Dakota Citation II measurement platform during three TRMM Field measurement campaigns. The Citation II made cloud measurements during TEFLUN B in Florida, the LBA program in Brazil, and KWAJEX in Kwajalein. The work performed can be divided into two parts. The first part consisted of reformatting the Citation data into a form more easily used to compare to the satellite information. The second part consisted of examination of the cloud data in order to characterize the properties of the tropical clouds. The reformatting of the Citation data was quite labor intensive and, due to the fact that the aircraft was involved in three of the field campaigns, it required a substantial number of person-hours to complete. Much of the analysis done on the second part was done in conjunction with the thesis work of Nicholas Anderson, then a graduate student at the University of North Dakota.

Migration plans and hours of work in Malaysia.

PubMed

Gillin, E D; Sumner, D A

1985-01-01

"This article describes characteristics of prospective migrants in the Malaysian Family Life Survey and investigates how planning to move affects hours of work. [The authors] use ideas about intertemporal substitution...to discuss the response to temporary and permanent wage expectations on the part of potential migrants. [An] econometric section presents reduced-form estimates for wage rates and planned migration equations and two-stage least squares estimates for hours of work. Men currently planning a move were found to work fewer hours. Those originally planning only a temporary stay at their current location work more hours." excerpt

Improving stamping simulation accuracy by accounting for realistic friction and lubrication conditions: Application to the door-outer of the Mercedes-Benz C-class Coupé

NASA Astrophysics Data System (ADS)

Hol, J.; Wiebenga, J. H.; Stock, J.; Wied, J.; Wiegand, K.; Carleer, B.

2016-08-01

In the stamping of automotive parts, friction and lubrication play a key role in achieving high quality products. In the development process of new automotive parts, it is therefore crucial to accurately account for these effects in sheet metal forming simulations. Only then, one can obtain reliable and realistic simulation results that correspond to the actual try-out and mass production conditions. In this work, the TriboForm software is used to accurately account for tribology-, friction-, and lubrication conditions in stamping simulations. The enhanced stamping simulations are applied and validated for the door-outer of the Mercedes- Benz C-Class Coupe. The project results demonstrate the improved prediction accuracy of stamping simulations with respect to both part quality and actual stamping process conditions.

How much structuring is beneficial with regard to examination scores? A prospective study of three forms of active learning.

PubMed

Reinhardt, Claus H; Rosen, Evelyne N

2012-09-01

Many studies have demonstrated a superiority of active learning forms compared with traditional lecture. However, there is still debate as to what degree structuring is necessary with regard to high exam outcomes. Seventy-five students from a premedical school were randomly attributed to an active lecture group, a cooperative group, or a collaborative learning group. The active lecture group received lectures with questions to resolve at the end of the lecture. At the same time, the cooperative group and the collaborative group had to work on a problem and prepare presentations for their answers. The collaborative group worked in a mostly self-directed manner; the cooperative group had to follow a time schedule. For the additional work of preparing the poster presentation, the collaborative and cooperative groups were allowed 50% more working time. In part 1, all groups worked on the citric acid cycle, and in part 2, all groups worked on molecular genetics. Collaborative groups had to work on tasks and prepare presentations for their answers. At the end of each part, all three groups were subjected to the same exam. Additionally, in the collaborative and cooperative groups, the presentations were marked. All evaluations were performed by two independent examiners. Exam results of the active lecture groups were highest. Results of the cooperative group were nonsignificantly lower than the active lecture group and significantly higher than the collaborative group. The presentation quality was nonsignificantly higher in the collaborative group compared with the cooperative group. This study shows that active lecturing produced the highest exam results, which significantly differed from collaborative learning results. The additional elaboration in the cooperative and collaborative learning setting yielded the high presentation quality but apparently could not contribute further to exam scores. Cooperative learning seems to be a good compromise if high exam and presentation scores are expected.

10 CFR 603.1285 - Intellectual property.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Intellectual property. 603.1285 Section 603.1285 Energy... Used in this Part § 603.1285 Intellectual property. Patents, trademarks, copyrights, mask works, protected data, and other forms of comparable property protected by Federal law and foreign counterparts. ...

10 CFR 603.1285 - Intellectual property.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Used in this Part § 603.1285 Intellectual property. Patents, trademarks, copyrights, mask works, protected data, and other forms of comparable property protected by Federal law and foreign counterparts. ... 10 Energy 4 2014-01-01 2014-01-01 false Intellectual property. 603.1285 Section 603.1285 Energy...

The work of accident and emergency nurses: Part I. An introduction to the rules.

PubMed

Sbaih, L

1997-01-01

An ethnomethodological study was undertaken to explore the work of Accident and Emergency nurses, the aim of which was to analyse the ordinary, taken-for-granted and everyday work of those practising A & E nursing. This, the first of two papers, will examine the work of A & E nurses via a description of rules or maxims that underpin work and its everyday organization. Such a description will form the basis for part 2, which explores the specific rules of A & E nursing work. To understand the specific rules and the ways in which they contribute to organization and accomplishment of aspects of the work, the definition and use of rules should be put forward. Defining rules within the context of the work provides a means by which specific rules of work can then be explored. The rules of A & E work ensure that A & E nursing is seen and heard as a specific type of work with its own unique approach to talk and organization. This is tied in with peer and colleague views of what is deemed to be clinical competence within the A & E setting.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jimbert, P.; Fernandez, J. I.; Eguia, I.

It is well known that one of the main advantages of the high speed forming (HSF) processes is the improvement in the forming limits of the used materials.Using the Electromagnetic Forming (EMF) technology two materials have been tested with different mechanical and physical properties: the AA5754 aluminium and the AZ31B magnesium alloys.The EMF process principle can be described as follows: A significant amount of electrical energy is stored in a bank of capacitors which are suddenly discharged releasing all the stored energy. This electric discharge runs through a coil which generates an intense transient magnetic field. At the same timemore » transient Eddy currents are induced in the electrically conductive part placed some millimetres far from the coil. Another intense magnetic field is generated due to those Eddy currents but on the opposite direction as the one generated by the coil. A big magnetic repulsion force is created between the part and the coil. This magnetic repulsion between both fields is used to launch the blank with no physical contact and obtain the desired deformation on it.The Forming Limit Diagrams (FLD) obtained in the EMF experiments were them compared to the ones obtained with the 'Nakazima' method at conventional deformation speed for both alloys. In parallel to these physical experiments, some simulations were carried out. But trying to simulate this process by FEM is a though work. There are several physics and many factors to take into account in a few microseconds deformation process. And all these factors are tightly related with each other, that is why to this date there is no commercial software able to simulate the EMF process accurately.From LABEIN-Tecnalia we are working with to different softwares to simulate the whole process: Maxwell 3D for the electromagnetic part and PAM-STAMP2G for the mechanical part of the problem.« less

New method to control form and texture on industrially-sized lenses

NASA Astrophysics Data System (ADS)

Walker, D. D.

2003-05-01

Summary This paper provides a progress-report on the development of the Precessions polishing process. This is a new small-tool polishing technique for producing aspheric forms and correcting spherical forms. Precessions polishing has been developed by Zeeko Ltd in collaboration with the Optical Science Laboratory at University College London and Loh Optikmaschinen. The Zeeko/Loh All machine (see figure below) has a capacity of 200mm diameter, and is targeted at industrial lenses and mirrors. The baseline of the PrecessionsTM process is a sub-diameter physical tool working the surface with a polishing slurry. Position and orientation of the tooling is controlled by a 7-axis CNC polishing machine that has been custom-designed for the purpose. The tool comprises an inflated, bulged, rubber-membrane (the 'bonnet'), covered with one of the usual proprietary flexible polishing surfaces familiar to opticians. The membrane moulds itself around the local asphere, keeping good contact everywhere. It is spun about its axis to give high removal-rates, and attacks the surface of the part working on the side of the bulged surface, rather than the classical pole-down configuration. The contact area and polishing pressure can be varied independently by changing the degree to which the bonnet is compressed, and the internal fluid pressure. The rotation axis is precessed around the local normal to the part, and this averages surface texture and achieves a near-Gaussian tool removal-profile (Influence function'). For axially-symmetric parts, the part is rotated and the tool moved radially, thereby creating a spiral tool-path. An off- line software application analyses i) the surface error-profile, and ii) experimental data on the tool influence functions for different spot-sizes. An iterative numerical optimisation method is then used to compute the dwell-time and spot- size for each zone of the spiral on the surface, to rectify the form error.

Work and Family in the United States: A Policy Initiative. A Report of the Family Policy Panel of the Economic Policy Council of UNA-USA.

ERIC Educational Resources Information Center

United Nations Association of the United States of America, New York, NY.

As part of its world employment project, the Economic Policy Council of the United Nations Association of the United States formed the family policy panel to further examine the extent of ongoing changes affecting the family, the workplace, and the economy. In its work, the family policy panel concentrated on five issues considered central to the…

[Job-sharing in postgraduate medical training: not automatically a nice duet].

PubMed

Levi, M

2004-02-14

Part-time work is an increasingly common phenomenon amongst medical professionals. Therefore many postgraduate training programmes for resident physicians also offer the opportunity of part-time work, which is usually in the form of an 80% full-time equivalent post. A new initiative has created the possibility of job-sharing, in which each of the participants fulfills 50% of one training position. Although the experience of the participants is mainly positive, it is unclear how this development will impact the quality of patient care and how it will affect the fulfillment of the training objectives. A more systematic evaluation of job-sharing in postgraduate medical training programmes is required to clarify these points.

KSC-07pd2868

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, is lowered toward the base for installation. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station (ISS). Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

Forms of presentism in the history of science. Rethinking the project of historical epistemology.

PubMed

Loison, Laurent

2016-12-01

Since the late 1980s, presentism has seen a resurgence among some historians of science. Most of them draw a line between a good form of presentism and typical anachronism, but where the line should be drawn remains an open question. The present article aims at resolving this problem. In the first part I define the four main distinct forms of presentism at work in the history of science and the different purposes they serve. Based on this typology, the second part reconsiders what counts as anachronism, Whiggism and positivist history. This clarification is used as a basis to rethink the research program of historical epistemology in the third section. Throughout this article, I examine the conceptual core of historical epistemology more than its actual history, from Bachelard to Foucault or others. Its project should be defined - as Canguilhem suggested - as an attempt to account for both the contingency and the rationality of science. As such, historical epistemology is based on a complex fifth form of presentism, which I call critical presentism. The critical relation at stake not only works from the present to the past, because of the acknowledged rationality of science, but also from the past to the present because of the contingency and historicity of scientific knowledge. Copyright © 2016 Elsevier Ltd. All rights reserved.

Closed-form and Numerical Reverberation and Propagation: Inclusion of Convergence Effects

DTIC Science & Technology

2013-09-30

mode model Orca . In the second part of this work the theory is extended to range-dependnet environments and to include reverberation. The final...refracting environment by comparing results with the wave model Orca . 3 Fig. 1: Comparison with Orca of range-averaged propagation loss vs

Attachment Theory and Primary Caregiving

ERIC Educational Resources Information Center

Colmer, Kaye; Rutherford, Lynne; Murphy, Pam

2011-01-01

Offering intensive parent support programs within an early childhood setting recognises that early childhood educators are uniquely placed to form highly supportive and ongoing relationships with children and their families as part of their everyday work. This feature of early childhood programs can be utilised to include educators as partners in…

Theatre in India.

ERIC Educational Resources Information Center

Richmond, Farley, Ed.

1975-01-01

The articles in this volume place special emphasis on significant forms of traditional Indian theatre about which relatively little has been written. They represent, for the most part, the work of relatively young and unknown scholars on the threshold of their careers. Each article was selected for inclusion either because it probed deeply into…

Women in dentistry in South Africa: a survey of their experiences and opinions.

PubMed

Naidoo, S

2005-08-01

Women form an increasingly important part of the dentally trained workforce in South Africa. However, little is known about the professional issues and work-related problems affecting women dentists. A postal survey was undertaken of registered female dental practitioners in the country, with the aim to document their experiences. The survey (i) ascertained their current pattern of work, (ii) identified factors influencing their work patterns and (iii) identified factors that would help women remain in the profession or re-enter it more easily after an absence. A self-administered 50-item questionnaire containing open and closed-ended questions was used. Questions related to professional status, working patterns, practice ownership, postgraduate qualifications and career satisfaction. Nine hundred and sixty questionnaires were sent out and 280 were returned (29% response rate). Although a significant majority were currently practicing (96%), about 20% were employed or worked part-time and 7 reported that they were not in practice at the time of the survey for various reasons including maternity leave, ill-health, retirement or that they were now working outside the dental field. Major factors identified in this study were the women's dual responsibility at home and at work. Few women find themselves in specialist practice, although 68% indicated that they would liked to have specialised. Home responsibilities and inflexible working conditions were commonly reported difficulties experienced with further studies. In addition, the lack of part-time training and the geographical location of training facilities also played a role. Women dentists need more flexible working schedules and conditions of employment. Part-time training and part-time career options should be extended. Retraining and refresher courses for Women dentists who have had a break in their careers should be available to enable them to return sooner and more easily to practice. Tertiary training dental facilities throughout the country should take up this challenge and run courses that are tailored to the local need and domestic commitments of the women involved.

On the geometry of mixed states and the Fisher information tensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Contreras, I., E-mail: icontrer@illinois.edu; Ercolessi, E., E-mail: ercolessi@bo.infn.it; Schiavina, M., E-mail: michele.schiavina@math.uzh.ch

2016-06-15

In this paper, we will review the co-adjoint orbit formulation of finite dimensional quantum mechanics, and in this framework, we will interpret the notion of quantum Fisher information index (and metric). Following previous work of part of the authors, who introduced the definition of Fisher information tensor, we will show how its antisymmetric part is the pullback of the natural Kostant–Kirillov–Souriau symplectic form along some natural diffeomorphism. In order to do this, we will need to understand the symmetric logarithmic derivative as a proper 1-form, settling the issues about its very definition and explicit computation. Moreover, the fibration of co-adjointmore » orbits, seen as spaces of mixed states, is also discussed.« less

Hot forming of composite prepreg: Numerical analyses

NASA Astrophysics Data System (ADS)

Guzman-Maldonado, Eduardo; Hamila, Nahiène; Boisse, Philippe; El Azzouzi, Khalid; Tardif, Xavier; Moro, Tanguy; Chatel, Sylvain; Fideu, Paulin

2017-10-01

The work presented here is part of the "FORBANS" project about the Hot Drape Forming (HDF) process consisting of unidirectional prepregs laminates. To ensure a fine comprehension of this process a combination strategy between experiment and numerical analysis is adopted. This paper is focused on the numerical analysis using the finite element method (FEM) with a hyperelastic constitutive law. Each prepreg layer is modelled by shell elements. These elements consider the tension, in-plane shear and bending behaviour of the ply at different temperatures. The contact/friction during the forming process is taken into account using forward increment Lagrange multipliers.

Astronaut James Newman works with power ratchet tool in payload bay

NASA Image and Video Library

1993-09-16

In Discovery's cargo bay, astronaut James H. Newman works with the power ratchet tool (PRT). Astronaut Carl E. Walz, who joined Newman for the lengthy period of extravehicular activity (EVA), is partially visible in the background. The two mission specialists devoted part of their EVA to evaluating tools and equipment expected to be used in the Hubble Space Telescope servicing. A desert area in Africa forms the backdrop for the 70mm scene.

Structural crashworthiness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, N.; Wierzbicki, T.

1983-01-01

Behind the quest for safety in all forms of transport lies a complex technology of which structural crashworthiness forms an important part. This volume contains the work of over twenty experts whose interests range from the fundamental principles of structural collapse to the application of those principles to the design of ships, aircraft, road vehicles, and rail vehicles. The text focuses on the application of analytical and experimental techniques to predict energy dissipation characteristics of thin-walled structures and structural members under quasi-static and dynamic loadings.

A projection operator method for the analysis of magnetic neutron form factors

NASA Astrophysics Data System (ADS)

Kaprzyk, S.; Van Laar, B.; Maniawski, F.

1981-03-01

A set of projection operators in matrix form has been derived on the basis of decomposition of the spin density into a series of fully symmetrized cubic harmonics. This set of projection operators allows a formulation of the Fourier analysis of magnetic form factors in a convenient way. The presented method is capable of checking the validity of various theoretical models used for spin density analysis up to now. The general formalism is worked out in explicit form for the fcc and bcc structures and deals with that part of spin density which is contained within the sphere inscribed in the Wigner-Seitz cell. This projection operator method has been tested on the magnetic form factors of nickel and iron.

Space Research Institute (IKI) Exhibition as an Educational Project

NASA Astrophysics Data System (ADS)

Sadovski, Andrei; Antonenko, Elena

2016-07-01

The Exhibition "Space Science: Part and Future" in Space Research Institute (IKI) was opened in 2007 in commemoration of the 50th anniversary of the first man-made satellite launch. It covers the latest and the most important findings in space research, shows instruments which are used in space exploration, and presents past, current, and future Russian science missions. Prototypes of space instruments developed by Russian specialists and mockups of spacecraft and spaceships flown to space are displayed, together with information posters, describing space missions, their purposes and results. The Exhibition takes a great part in school space education. Its stuff actively works with schoolchildren, undergraduate students and also makes a great contribution in popularization of space researches. Moreover the possibility to learn about scientific space researches first-hand is priceless. We describe the main parts of the Exhibition and forms of it work and also describe the collaboration with other museums and educational organizations.

Full- and part-time work: gender and welfare-type differences in European working conditions, job satisfaction, health status, and psychosocial issues.

PubMed

Bartoll, Xavier; Cortès, Imma; Artazcoz, Lucía

2014-07-01

The aim of this study was to analyze the differences between full- and part-time employment (FTE and PTE) in terms of working conditions, on the one hand, and job satisfaction, health status, and work-related psychosocial problems according to gender and welfare state regime, on the other hand, and to analyze the role of working conditions in the association between PTE and FTE. This cross-sectional study was based on a sample of 7921 men and 8220 women from the European Working Conditions Survey aged 16-64 years, who were employed part-time (5-19 or 20-30 hours per week) or full-time (31-40 hours/week). Multiple logistic regression models were fitted separately for each gender and welfare state regime. PTE is associated with poorer working conditions than FTE for all national welfare types. Among women, only those in southern European countries experienced low job satisfaction [odds ratio after adjustment (OR adj) for sociodemographic variables, OR adj1.73, and 1.66, for those working 20-30 and 5-19 hours/week, respectively; reference group: FTE workers], but this association disappeared after further adjustment for working conditions. Low job satisfaction and poorer health status was more common among PTE men from continental (low job satisfaction, OR adj1.80 and 3.61, for 20-30 and 5-19 working hours/week, respectively), and southern European (OR adj, 2.98, for 5-19 working hours/week) countries. PTE tended to be associated with fewer psychosocial problems among women, but with more psychosocial problems among men in continental Europe and those those engaged in "mini-jobs" in southern European welfare regimes. The association between FTE and PTE and job satisfaction, health status, and psychosocial problems is partly driven by working conditions and differs between gender and welfare regime. This highlights the importance of promoting effective measures to ensure equal treatment between FTE and PTE workers and the role of the social norms that form part of these different welfare states regimes.

The analysis of bottom forming process for hybrid heating device

NASA Astrophysics Data System (ADS)

Bałon, Paweł; Świątoniowski, Andrzej; Kiełbasa, Bartłomiej

2017-10-01

In this paper the authors present an unusual method for bottom forming applicable for various industrial purposes including the manufacture of water heaters or pressure equipment. This method allows for the fabrication of the bottom of a given piece of stainless steel into a pre-determined shape conforming to the DIN standard which determines the most advantageous dimensions for the bottom cross section in terms of working pressure loading. The authors checked the validity of the method in a numerical and experimental way generating a tool designed to produce bottoms of specified geometry. Many problems are encountered during the design and production of parts, especially excessive sheet wrinkling over a large area of the part. The experiment showed that a lack of experience and numerical analysis in the design of such elements would result in the production of highly wrinkled parts. This defect would render the parts impossible to assemble with the cylindrical part. Many tool shops employ a method for drawing elements with a spherical surface which involves additional spinning, stamping, and grading operations, which greatly increases the cost of parts production. The authors present and compare two forming methods for spherical and parabolic objects, and experimentally confirm the validity of the sheet reversing method with adequate pressure force. The applied method produces parts in one drawing operation and in a following operation that is based on laser or water cutting to obtain a round blank. This reduces the costs of tooling manufacturing by requiring just one tool which can be placed on any hydraulic press with a minimum force of 2 000 kN.

KSC-08pd0606

NASA Image and Video Library

2008-02-11

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, an overhead crane moves the Special Purpose Dexterous Manipulator, known as Dextre, to the payload canister for transfer to Launch Pad 39A. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station. Along with Canadarm2, which is called the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System. The three components have been designed to work together or independently. Dextre is part of the payload on space shuttle Endeavour's STS-123 mission, targeted for launch March 11. Photo courtesy of The Boeing Company

KSC-08pd0608

NASA Image and Video Library

2008-02-11

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the Special Purpose Dexterous Manipulator, known as Dextre, moves nearer to the payload canister where it will be installed for transfer to Launch Pad 39A. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station. Along with Canadarm2, which is called the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System. The three components have been designed to work together or independently. Dextre is part of the payload on space shuttle Endeavour's STS-123 mission, targeted for launch March 11. Photo courtesy of The Boeing Company

KSC-08pd0604

NASA Image and Video Library

2008-02-11

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the Special Purpose Dexterous Manipulator, known as Dextre, moves across the facility via an overhead crane to the payload canister for transfer to Launch Pad 39A. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station. Along with Canadarm2, which is called the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System. The three components have been designed to work together or independently. Dextre is part of the payload on space shuttle Endeavour's STS-123 mission, targeted for launch March 11. Photo courtesy of The Boeing Company

KSC-08pd0607

NASA Image and Video Library

2008-02-11

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the Special Purpose Dexterous Manipulator, known as Dextre, moves closer to the payload canister where it will be installed for transfer to Launch Pad 39A. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station. Along with Canadarm2, which is called the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System. The three components have been designed to work together or independently. Dextre is part of the payload on space shuttle Endeavour's STS-123 mission, targeted for launch March 11. Photo courtesy of The Boeing Company

KSC-07pd2871

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians help guide the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, into place for installation on the base. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station (ISS). Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

KSC-07pd2863

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, is ready to be installed on the base. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station ISS. Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

KSC-07pd2870

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians help guide the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, into place for installation on the base. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station (ISS). Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

KSC-07pd2866

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, is moved across the facility. The arm will be installed on the base. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station (ISS). Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

Effluent Management Facility Evaporator Bottom-Waste Streams Formulation and Waste Form Qualification Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saslow, Sarah A.; Um, Wooyong; Russell, Renee L.

This report describes the results from grout formulation and cementitious waste form qualification testing performed by Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions, LLC (WRPS). These results are part of a screening test that investigates three grout formulations proposed for wide-range treatment of different waste stream compositions expected for the Hanford Effluent Management Facility (EMF) evaporator bottom waste. This work supports the technical development need for alternative disposition paths for the EMF evaporator bottom wastes and future direct feed low-activity waste (DFLAW) operations at the Hanford Site. High-priority activities included simulant production, grout formulation, and cementitious wastemore » form qualification testing. The work contained within this report relates to waste form development and testing, and does not directly support the 2017 Integrated Disposal Facility (IDF) performance assessment (PA). However, this work contains valuable information for use in PA maintenance past FY 2017 and future waste form development efforts. The provided results and data should be used by (1) cementitious waste form scientists to further the understanding of cementitious leach behavior of contaminants of concern (COCs), (2) decision makers interested in off-site waste form disposal, and (3) the U.S. Department of Energy, their Hanford Site contractors and stakeholders as they assess the IDF PA program at the Hanford Site. The results reported help fill existing data gaps, support final selection of a cementitious waste form for the EMF evaporator bottom waste, and improve the technical defensibility of long-term waste form risk estimates.« less

Working with and promoting early career scientists within a larger community

NASA Astrophysics Data System (ADS)

Pratt, K.

2017-12-01

For many scientific communities, engaging early career researchers is critical for success. These young scientists (graduate students, postdocs, and newly appointed professors) are actively forming collaborations and instigating new research programs. They also stand to benefit hugely from being part of a scientific community, gaining access to career development activities, becoming part of strong collaborator networks, and achieving recognition in their field of study — all of which will help their professional development. There are many ways community leaders can work proactively to support and engage early career scientists, and it it is often a community manager's job to work with leadership to implement such activities. In this presentation, I will outline ways of engaging early career scientists at events and tailored workshops, of promoting development of their leadership skills, and of creating opportunities for recognizing early career scientists within larger scientific communities. In this talk, I will draw from my experience working with the Deep Carbon Observatory Early Career Scientist Network, supported by the Alfred P. Sloan Foundation.

EFFECTS OF BIOSOLIDS APPLICATION ON EROSION CONTROL AND ECOSYSTEM RECOVERY FOLLOWING THE BUFFALO CREEK FIRE - PART II

EPA Science Inventory

Nutrient (i.e. nitrogen) contamination of surface waters constitutes one of the most pervasive problems facing wastewater treatment works across the country. Nitrogen discharge to surface water occurs mostly in the form of ammonia which is identified as the most toxic nitrogen sp...

Work-Based Doctorates: Professional Extension at the Highest Levels

ERIC Educational Resources Information Center

Costley, Carol; Lester, Stan

2012-01-01

The growth and evolution of professional doctorates in Australia, the UK and other parts of the English-speaking world has been widely reported and discussed. Recently, forms of doctorate have emerged that are not geared to specific professions or disciplines, and that are used by senior practitioners as vehicles for professional development and…

Freedom to be...in Communication: Part 4, Mass Media in Human Communication.

ERIC Educational Resources Information Center

Murphy, Sharon

This booklet, a discovery/work text, asks learners to take a careful look at the ways they participate in communication situations, at the form their participation in communication takes, and at the personal and societal consequences of communication. Laboratory activities focus on techniques of communication and on strategies for dealing with…

Finding and Fostering Learning: What College and University Leaders Need to Know and What They Can Do

ERIC Educational Resources Information Center

Neumann, Anna; Bolitzer, Liza

2014-01-01

Learning is a core part of all forms of higher education work. College leaders of all kinds--administrators, staff, faculty, and students--must know how to seek out and support the wide array of learning that can go on in colleges and universities.

Share Your Voice: Online Community Building during Reaffirmation of Accreditation

ERIC Educational Resources Information Center

Kruse, Brenda; Bonura, Kimberlee Bethany; James, Suzanne G.; Potler, Shelley

2013-01-01

Walden University recently underwent a successful reaffirmation of accreditation process with The Higher Learning Commission of the North Central Association of Colleges and Schools. As part of the 3-year process, a committee, named the Education and Communication working group, was formed to inform and engage with the entire Walden community. The…

The Gift of Silence

ERIC Educational Resources Information Center

Haskins, Cathleen

2011-01-01

Slowing down, quieting the mind and body, and experiencing silence nourishes the spirit. Montessori educators are mandated to cultivate not just the intellect but the whole child. They recognize that nurturing the spirit of the child is part of what makes this form of education work so well. This article discusses the benefits of stillness and…

Jose de Escandon--Colonizer of Nuevo Santander.

ERIC Educational Resources Information Center

Miller, Hubert J.

Jose de Escandon's colonization work in the present Mexican state of Tamaulipas and the lower Rio Grande valley forms an essential part of the Spanish northern borderlands. Many of the land grants in the area, ranching, and some of the present day agricultural industries originated with the colonization projects initiated by Escandon, who proved…

Coupled Oscillators: Interesting Experiments for High School Students

ERIC Educational Resources Information Center

Kodejška, C.; Lepil, O.; Sedlácková, H.

2018-01-01

This work deals with the experimental demonstration of coupled oscillators using simple tools in the form of mechanical coupled pendulums, magnetically coupled elastic strings or electromagnetic oscillators. For the evaluation of results the data logger Lab Quest Vernier and video analysis in the Tracker program were used. In the first part of…

Flexible Work Schedules. A Catalyst Position Paper.

ERIC Educational Resources Information Center

Catalyst, New York, NY.

Seven basic forms of part-time employment that are particularly well-adapted to the needs and abilities of college-educated women who wish to take on less than a full-time career responsibility, have been identified and found capable of yielding greater productivity, reduced absenteeism, and lower turnover and training costs: (1) Job Pairing, in…

Word Lists and Languages. Technical Report No. 2.

ERIC Educational Resources Information Center

Grimes, Joseph E.

In order to store sociolinguistic information about the world's languages, Cornell University, The University of Oklahoma, and the Summer Institute of Linguistics formed a computerized data base. This report summarizes work done by that project. The first part of the report contains data on the languages of the world. The complete data base,…

Robotics Team Lights Up New Year's Eve

ERIC Educational Resources Information Center

LeBlanc, Cheryl

2011-01-01

A robotics team from Muncie, Indiana--the PhyXTGears--is made up of high school students from throughout Delaware County. The group formed as part of the FIRST Robotics program (For Inspiration and Recognition of Science and Technology), an international program founded by inventor Dean Kamen in which students work with professional engineers and…

International WIL Placements: Their Influence on Student Professional Development, Personal Growth and Cultural Competence

ERIC Educational Resources Information Center

Gribble, Nigel; Dender, Alma; Lawrence, Emma; Manning, Kirrily; Falkmer, Torbjorn

2014-01-01

In the increasingly global world, skills in cultural competence now form part of the minimum standards of practice required for allied health professionals. During an international work-integrated learning (WIL) placement, allied health students' cultural competence is expected to be enhanced. The present study scrutinized reflective journals of…

"What about the Boys?": Regendered Local Labour Markets and the Recomposition of Working Class Masculinities.

ERIC Educational Resources Information Center

Haywood, Chris; Mac an Ghaill, Mairtin

1996-01-01

Construction of male gender identity must be considered in relation to reforms in state schooling, restructured labor markets, the rise of diverse family forms, and media representations of masculinity. Despite the backlash against feminism and equal employment opportunity efforts, social class must remain part of the analysis. (SK)

Quality Management Procedures Influence the Food Safety Practices at Childcare Centers

ERIC Educational Resources Information Center

Enke, Allison A.; Briley, Margaret E.; Curtis, Suzanne R.; Greninger, Sue A.; Staskel, Deanna M.

2007-01-01

Childcare in the United States (US) has become a necessary part of life for most working parents with the increased use of center-based childcare over the past three decades. Approximately 13 million preschoolers attend some form of childcare. Literature indicates the main predictors of quality childcare programs are adequate experience and…

Perceptions of Schooling, Pedagogy and Notation in the Lives of Visually-Impaired Musicians

ERIC Educational Resources Information Center

Baker, David; Green, Lucy

2016-01-01

This article discusses findings on schooling, pedagogy and notation in the life-experiences of amateur and professional visually-impaired musicians/music teachers, and the professional experiences of sighted music teachers who work with visually-impaired learners. The study formed part of a broader UK Arts and Humanities Research Council funded…

Exploring the Effects of Communication Intervention for Developmental Pragmatic Language Impairments: A Signal-Generation Study

ERIC Educational Resources Information Center

Adams, Catherine; Lloyd, Julian; Aldred, Catherine; Baxendale, Janet

2006-01-01

Background: The remediation of pragmatic problems forms a significant part of the caseload for professionals working with children with communication problems. There is little systematic evidence that demonstrates the benefits of speech and language therapy for children whose difficulties lie primarily within the pragmatic domain or which…

The Teaching of Chaucer in Fifth and Sixth Forms.

ERIC Educational Resources Information Center

Brew, Trevor

1967-01-01

The teacher can sucessfully present Chaucer's "Canterbury Tales" to 11th- and 12th-grade students by concentrating on "The Prologue" and one of the tales--e.g., "The Pardoner's Tale." The structure and plan of the entire work, however, should first be considered before its various parts can be fully understood.…

State Technical Committee for Accounting. Official Report.

ERIC Educational Resources Information Center

Jensen, Claudia

This report contains validated task inventory listings for accounting occupations. An introductory report in brief outline form gives background of the work of the technical committee that identified the duties and tasks. This is followed by four attachments which make up most of the document. Attachment A has two parts: (1) an accounting skills…

CO2 Capture Project: An Integrated, Collaborative Technology Development Project For CO2 Separation, Capture And Geologic Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Helen Kerr

2002-01-10

This report (which forms part of the requirements of the Statement of Work Task 0, subtask 0.4) records progress towards defining a detailed Work Plan for the CCP 30 days after contract initiation. It describes the studies planned, workscope development and technology provider bid evaluation status at that time. Business sensitive information is provided separately in Appendix 1. Contract negotiations are on hold pending award of patent waiver status to the CCP.

Heat transfer in porous medium embedded with vertical plate: Non-equilibrium approach - Part B

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quadir, G. A., E-mail: Irfan-magami@Rediffmail.com, E-mail: gaquadir@gmail.com; Badruddin, Irfan Anjum

2016-06-08

This work is continuation of the paper Part A. Due to large number of results, the paper is divided into two section with section-A (Part A) discussing the effect of various parameters such as heat transfer coefficient parameter, thermal conductivity ratio etc. on streamlines and isothermal lines. Section-B highlights the heat transfer characteristics in terms of Nusselt number The Darcy model is employed to simulate the flow inside the medium. It is assumed that the heat transfer takes place by convection and radiation. The governing partial differential equations are converted into non-dimensional form and solved numerically using finite element method.

The Organizational Climate in Collegiate Athletics: An Athletic Trainer's Perspective.

PubMed

Mazerolle, Stephanie M; Eason, Christianne M

2018-01-01

  An organizational climate is largely based on an employee's perceptions of the working conditions in which he or she engages regularly. A multifaceted concept, the organizational climate is often formed by perceptions of employee welfare, rewards, and support. Achieving work-life balance is also a part of the climate.   To learn collegiate athletic trainers' perceptions of organizational climate and specifically how it may pertain to their work-life balance.   Phenomenologic study.   Collegiate practice setting.   Thirty athletic trainers working in the collegiate athletics setting took part in 1-on-1 phone interviews. The participants were 30.5 (interquartile range [IQR] = 7.75) years old and had been certified for 7 (IQR = 5) years and at their current position for 4 (IQR = 3) years.   Participants completed a phone interview that followed a semistructured framework. All transcribed interviews were analyzed using a phenomenologic approach. Researcher triangulation, expert review, and data saturation were used to establish credibility.   Athletic trainers working in the collegiate athletics setting who had positive perceptions of their work-life balance described their organizational climate as family friendly. Our participants' supervisors allowed for autonomy related to work scheduling, which provided opportunities for work-life balance. These athletic trainers believed that they worked in a climate that was collegial, which was helpful for work-life balance. In addition, the importance of placing family first was part of the climate.   The perceptions of our participants revealed a climate of family friendliness, supervisor support, and collegiality among staff members, which facilitated the positive climate for work-life balance. The mindset embraced the importance of family and recognized that work did not always have to supersede personal priorities.

Research and industrialization of near-net rolling technology used in shaft parts

NASA Astrophysics Data System (ADS)

Hu, Zhenghuan; Wang, Baoyu; Zheng, Zhenhua

2017-11-01

Shaft part rolling is an efficient and green nearnet shaping technology offering many advantages, including high production efficiency, high material utilization rate, high product quality, and excellent production environment. In this paper, the features of shaft part rolling are introduced along with the working principles of two main shaft part rolling technologies, namely, cross wedge rolling (CWR) and skew rolling (SR). In relation to this technology, some R&D achievements gained by the University of Science and Technology Beijing are summarized. Finally, the latest developments in shaft part rolling are presented, including SR steel balls, precise forming of camshaft blank by CWR, SR phosphorous copper balls at room temperature, and CWR hollow axle sleeve. Although the shaft part rolling technology has been widely used in China, it only accounts for about 15% of applicable parts at present. Nevertheless, this technology has broad application prospects.

Research and industrialization of near-net rolling technology used in shaft parts

NASA Astrophysics Data System (ADS)

Hu, Zhenghuan; Wang, Baoyu; Zheng, Zhenhua

2018-03-01

Shaft part rolling is an efficient and green nearnet shaping technology offering many advantages, including high production efficiency, high material utilization rate, high product quality, and excellent production environment. In this paper, the features of shaft part rolling are introduced along with the working principles of two main shaft part rolling technologies, namely, cross wedge rolling (CWR) and skew rolling (SR). In relation to this technology, some R&D achievements gained by the University of Science and Technology Beijing are summarized. Finally, the latest developments in shaft part rolling are presented, including SR steel balls, precise forming of camshaft blank by CWR, SR phosphorous copper balls at room temperature, and CWR hollow axle sleeve. Although the shaft part rolling technology has been widely used in China, it only accounts for about 15% of applicable parts at present. Nevertheless, this technology has broad application prospects.

Study of electrode slice forming of bicycle dynamo hub power connector

NASA Astrophysics Data System (ADS)

Chen, Dyi-Cheng; Jao, Chih-Hsuan

2013-12-01

Taiwan's bicycle industry has been an international reputation as bicycle kingdom, but the problem in the world makes global warming green energy rise, the development of electrode slice of hub dynamo and power output connector to bring new hope to bike industry. In this study connector power output to gather public opinion related to patent, basis of collected documents as basis for design, structural components in least drawn to power output with simple connector. Power output of this study objectives connector hope at least cost, structure strongest, highest efficiency in output performance characteristics such as use of computer-aided drawing software Solid works to establish power output connector parts of 3D model, the overall portfolio should be considered part types including assembly ideas, weather resistance, water resistance, corrosion resistance to vibration and power flow stability. Moreover the 3D model import computer-aided finite element analysis software simulation of expected the power output of the connector parts manufacturing process. A series of simulation analyses, in which the variables relied on first stage and second stage forming, were run to examine the effective stress, effective strain, press speed, and die radial load distribution when forming electrode slice of bicycle dynamo hub.

Looking into the Earth

NASA Astrophysics Data System (ADS)

Mussett, Alan E.; Aftab Khan, M.; Button, Illustrated By Sue

2000-12-01

Looking Into the Earth comprehensively describes the principles and applications of both `global' and `exploration' geophysics on all scales. It forms an introduction to geophysics suitable for those who do not necessarily intend to become professional geophysicists, including geologists, civil engineers, environmental scientists, and field archaeologists. The book is organised into two parts: Part 1 describes the geophysical methods, while Part 2 illustrates their use in a number of extended case histories. Mathematical and physical principles are introduced at an elementary level, and then developed as necessary. Student questions and exercises are included at the end of each chapter. The book is aimed primarily at introductory and intermediate university students taking courses in geology, earth science, environmental science, and engineering. It will also form an excellent introductory textbook in geophysics departments, and will help practising geologists, archaeologists and engineers understand what geophysics can offer their work. Accessible to students with little background in maths and physics Covers both global and applied geophysics Well illustrated and contains many student exercises and case studies Written by experienced teachers of geophysics

Stimulus control: Part II

PubMed Central

Dinsmoor, James A.

1995-01-01

The second part of my tutorial stresses the systematic importance of two parameters of discrimination training: (a) the magnitude of the physical difference between the positive and the negative stimulus (disparity) and (b) the magnitude of the difference between the positive stimulus, in particular, and the background stimulation (salience). It then examines the role these variables play in such complex phenomena as blocking and overshadowing, progressive discrimination training, and the transfer of control by fading. It concludes by considering concept formation and imitation, which are important forms of application, and recent work on equivalence relations. PMID:22478222

B Plant Complex preclosure work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

ADLER, J.G.

1999-02-02

This preclosure work plan describes the condition of the dangerous waste treatment storage, and/or disposal (TSD) unit after completion of the B Plant Complex decommissioning Transition Phase preclosure activities. This description includes waste characteristics, waste types, locations, and associated hazards. The goal to be met by the Transition Phase preclosure activities is to place the TSD unit into a safe and environmentally secure condition for the long-term Surveillance and Maintenance (S&M) Phase of the facility decommissioning process. This preclosure work plan has been prepared in accordance with Section 8.0 of the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement)more » (Ecology et al. 1996). The preclosure work plan is one of three critical Transition Phase documents, the other two being: B Plant End Points Document (WHC-SD-WM-TPP-054) and B Plant S&M plan. These documents are prepared by the U.S. Department of Energy, Richland Operations Office (DOE-RL) and its contractors with the involvement of Washington State Department of Ecology (Ecology). The tanks and vessels addressed by this preclosure work plan are limited to those tanks end vessels included on the B Plant Complex Part A, Form 3, Permit Application (DOE/RL-88-21). The criteria for determining which tanks or vessels are in the Part A, Form 3, are discussed in the following. The closure plan for the TSD unit will not be prepared until the Disposition Phase of the facility decommissioning process is initiated, which follows the long-term S&M Phase. Final closure will occur during the Disposition Phase of the facility decommissioning process. The Waste Encapsulation Storage Facility (WESF) is excluded from the scope of this preclosure work plan.« less

Characteristics of the Roof Behaviors and Mine Pressure Manifestations During the Mining of Steep Coal Seam

NASA Astrophysics Data System (ADS)

Hong-Sheng, Tu; Shi-Hao, Tu; Cun, Zhang; Lei, Zhang; Xiao-Gang, Zhang

2017-12-01

A steep seam similar simulation system was developed based on the geological conditions of a steep coal seam in the Xintie Coal Mine. Basing on similar simulation, together with theoretical analysis and field measurement, an in-depth study was conducted to characterize the fracture and stability of the roof of steep working face and calculate the width of the region backfilled with gangue in the goaf. The results showed that, as mining progressed, the immediate roof of the steep face fell upon the goaf and backfilled its lower part due to gravity. As a result, the roof in the lower part had higher stability than the roof in the upper part of the working face. The deformation and fracture of main roof mainly occurred in the upper part of the working face; the fractured main roof then formed a "voussoir beam" structure in the strata's dip direction, which was subjected to the slip- and deformation-induced instability. The stability analysis indicated that, when the dip angle increased, the rock masses had greater capacity to withstand slip-induced instability but smaller capacity to withstand deformation-induced instability. Finally, the field measurement of the forces exerted on the hydraulic supports proved the characteristics of the roof's behaviors during the mining of a steep seam.

Cochlea and other spiral forms in nature and art.

PubMed

Marinković, Slobodan; Stanković, Predrag; Štrbac, Mile; Tomić, Irina; Ćetković, Mila

2012-01-01

The original appearance of the cochlea and the specific shape of a spiral are interesting for both the scientists and artists. Yet, a correlation between the cochlea and the spiral forms in nature and art has been very rarely mentioned. The aim of this study was to investigate the possible correlation between the cochlea and the other spiral objects in nature, as well as the artistic presentation of the spiral forms. We explored data related to many natural objects and examined 13,625 artworks created by 2049 artists. We also dissected 2 human cochleas and prepared histologic slices of a rat cochlea. The cochlea is a spiral, cone-shaped osseous structure that resembles certain other spiral forms in nature. It was noticed that parts of some plants are arranged in a spiral manner, often according to Fibonacci numbers. Certain animals, their parts, or their products also represent various types of spirals. Many of them, including the cochlea, belong to the logarithmic type. Nature created spiral forms in the living world to pack a larger number of structures in a limited space and also to improve their function. Because the cochlea and other spiral forms have a certain aesthetic value, many artists presented them in their works of art. There is a mathematical and geometric correlation between the cochlea and natural spiral objects, and the same functional reason for their formation. The artists' imagery added a new aspect to those domains. Obviously, the creativity of nature and Homo sapiens has no limits--like the infinite distal part of the spiral. Copyright © 2012 Elsevier Inc. All rights reserved.

Science Teachers' Beliefs and Practices: Issues, Implications and Research Agenda

ERIC Educational Resources Information Center

Mansour, Nasser

2009-01-01

The study of teachers' beliefs forms part of the process of understanding how teachers conceptualize their work which in turn is important to the understanding of teachers' practices and their decisions in the classroom. A growing body of research argues that teachers' beliefs should be studied within a framework that is aware of the influence of…

Students' Perceived Service Quality of Distance Learning Courses in a Dual-Mode Education System

ERIC Educational Resources Information Center

Yener, Dursun

2013-01-01

Distance learning (DL) has become an important part of university education. In the past DL was applied in different universities with different forms. With rapid technological developments, DL gained a new format through the Internet. Students can take courses online wherever they are geographically. Therefore, working people and adults can…

Image analysis library software development

NASA Technical Reports Server (NTRS)

Guseman, L. F., Jr.; Bryant, J.

1977-01-01

The Image Analysis Library consists of a collection of general purpose mathematical/statistical routines and special purpose data analysis/pattern recognition routines basic to the development of image analysis techniques for support of current and future Earth Resources Programs. Work was done to provide a collection of computer routines and associated documentation which form a part of the Image Analysis Library.

Voices of Pedagogical Development--Expanding, Enhancing and Exploring Higher Education Language Learning

ERIC Educational Resources Information Center

Jalkanen, Juha, Ed.; Jokinen, Elina, Ed.; Taalas, Peppi, Ed.

2015-01-01

"Voices of Pedagogical Development" is a collection of articles written by teacher-researchers at the University of Jyväskylä Language Centre. It shares the fruits of their ideas and development work in the areas of academic literacies, new forms of teaching and learning, and internationalisation. Part one aims at establishing and…

The Open Learning Object Model to Promote Open Educational Resources

ERIC Educational Resources Information Center

Fulantelli, Giovanni; Gentile, Manuel; Taibi, Davide; Allegra, Mario

2008-01-01

In this paper we present the results of research work, that forms part of the activities of the EU-funded project SLOOP: Sharing Learning Objects in an Open Perspective, aimed at encouraging the definition, development and management of Open Educational Resources based on the Learning Object paradigm (Wiley, 2000). We present a model of Open…

Moving Teachers: Implementation of Transfer Incentives in Seven Districts. Executive Summary. NCEE 2012-4052

ERIC Educational Resources Information Center

Glazerman, Steven; Protik, Ali; Teh, Bing-ru; Bruch, Julie; Seftor, Neil

2012-01-01

This report describes the implementation and intermediate impacts of an intervention designed to provide incentives for a school district's highest-performing teachers to work in its lowest-achieving schools. The report is part of a larger study in which random assignment was used to form two equivalent groups of classrooms organized into teacher…

"Bitchy Girls and Silly Boys": Gender and Exclusion from School

ERIC Educational Resources Information Center

Carlile, Anna

2009-01-01

This paper is concerned with findings about gender which form part of a larger ethnographic study. The study was undertaken during the author's employment as a local authority (school district) Pupil Support Officer, where the author's work involved the support of young people who had been permanently excluded (expelled) from school for a variety…

Teachers' Beliefs in English Language Teaching and Learning: A Review of the Literature

ERIC Educational Resources Information Center

Gilakjani, Abbas Pourhosein; Sabouri, Narjes Banou

2017-01-01

Beliefs form part of the process of understanding how teachers shape their work which is significant to the comprehending of their teaching methods and their decisions in the classroom. Teachers' beliefs have been an interesting topic for researchers due to the input they provide for the improvement of English language teaching and learning.…

Chinese Academics under the Reformed Remuneration System: A Case Study

ERIC Educational Resources Information Center

Xueyan, Xu

2015-01-01

As part of ongoing efforts to attract and keep talents, Chinese governments and universities have initiated a series of reforms to improve faculty salaries over the past decades. However, the reformed salary policies do not work as well as expected. According to the field data, the formed salary policies had posted a new set of challenges to…

An Ethnodrama on Work-Related Learning in Precarious Jobs: Racialization and Resistance

ERIC Educational Resources Information Center

Sangha, Jasjit K.; Slade, Bonnie; Mirchandani, Kiran; Maitra, Srabani; Shan, Hongxia

2012-01-01

This article is based on a research project on the lived experiences of precarious workers in Toronto, Canada. Using interviews with women in part-time, contract, and temporary jobs in three sectors (telemarketing, retail, and garment), the project explores the ways in which racial hierarchies structure jobs as well as forms of resistance that…

KSC-07pd2867

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, is moved toward the base, in the background. The arm will be installed on the base. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station (ISS). Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

KSC-07pd2869

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians aid with the lowering of the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, toward the base. The arm will be installed on the base. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station (ISS). Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

KSC-07pd2864

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians adjust the cables of an overhead crane on the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre. The arm will be moved to and installed on the base. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station ISS. Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

KSC-07pd2865

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, technicians begin raising the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, for its move across the facility. The arm will be installed on the base. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station ISS. Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

KSC-08pd0605

NASA Image and Video Library

2008-02-11

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the Special Purpose Dexterous Manipulator, known as Dextre, moves across the facility via an overhead crane to the payload canister at right for transfer to Launch Pad 39A. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station. Along with Canadarm2, which is called the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System. The three components have been designed to work together or independently. Dextre is part of the payload on space shuttle Endeavour's STS-123 mission, targeted for launch March 11. Photo courtesy of The Boeing Company

O

NASA Astrophysics Data System (ADS)

Donnellan, Karen

My work is driven by the metaphysical and the potential for healing through the manipulation of energy. Points of research include the enso (the only symbol used in Zen Buddhism), which uses the circle as a symbol of wholeness, divinity, and enlightenment. The writings of Alex Grey, Eckhart Tolle and the work of Ann Hamilton will also be investigated. I plan to create work from turned wooden vortex forms, the shapes of which are based on the movement of energy within the body. These objects will be transformed from wood, through rubber, wax, plaster, iron, bronze to cast, and blown glass. This transformation through materials is becoming a metaphor for the continuous transformation of universal light and energy. As part of my material research, I will exploit various casting techniques including kiln casting, hot casting, and pate de verre. Photography, film, and projection also will be explored. Conceptually, the process will become an integral part of the work where involved, repetitive methods will be treated as a meditation or mantra and will, in turn, add a performative dimension to the work. It is through these meditative practices that I intend to imbue the work with healing energies.

Conditioning of material properties by micro rotary swaging

NASA Astrophysics Data System (ADS)

Ishkina, Svetlana; Schenck, Christian; Kuhfuss, Bernd

2018-05-01

Cold forming initiates a change of the material properties like flow stress and hardness. Due to work hardening and the accompanied loss of formability some intermediate heat treatment may become necessary in multi-stage forming processes. One possibility to avoid this heat treatment is to adjust the forming characteristics in terms of flow stress and formability by rotary swaging. This process is particularly suitable not only for producing of the target geometry but also for modifying of the material properties during the process and thus, rotary swaging can prepare the parts for further forming, such as extrusion. In this contribution, the process chain "rotary swaging - extrusion" for austenite stainless steel AISI304 was investigated. The forming characteristics of the semi-finished products for the extrusion were influenced by the previous swaging process. The conditioning by changing of the microstructure, the work hardening and the geometry of the processed wires was achieved by the process design. For this purpose, the geometry of the swaging dies, the feeding velocity as well as the process kinematics (eccentric swaging) and a stroke following angle Δɸ were varied. In particular, the novel geometry of the swaging dies with extraordinary sloped faces generated a non-symmetric material flow with severe shear deformation and thus an extreme change of the microstructure. The required forming force of the following extrusion process reflected the range of achievable conditioning. The micro rotary swaging process positively improved the formability of AISI304 by work softening.

Experimental analysis of the sheet metal forming behavior of newly developed press hardening steels

NASA Astrophysics Data System (ADS)

Meza-García, Enrique; Kräusel, Verena; Landgrebe, Dirk

2018-05-01

The aim of this work was the characterization of the newly developed press hardening sheet alloys 1800 PHS and 2000 PHS developed by SSAB with regard to their hot forming behavior on the basis of the experimental determination of relevant mechanical and technological properties. For this purpose conventional and non-conventional sheet metal testing methods were used. To determine the friction coefficient, the strip drawing test was applied, while the deep drawing cup test was used to determine the maximum draw depth. Finally, a V-bending test was carried out to evaluate the springback behavior of the investigated alloys by varying the blank temperature and quenching media. This work provides a technological guideline for the production of press hardened sheet parts made of these investigated sheet metals.

The advancement of a new human factors report--'The Unique Report'--facilitating flight crew auditing of performance/operations as part of an airline's safety management system.

PubMed

Leva, M C; Cahill, J; Kay, A M; Losa, G; McDonald, N

2010-02-01

This paper presents the findings of research relating to the specification of a new human factors report, conducted as part of the work requirements for the Human Integration into the Lifecycle of Aviation Systems project, sponsored by the European Commission. Specifically, it describes the proposed concept for a unique report, which will form the basis for all operational and safety reports completed by flight crew. This includes all mandatory and optional reports. Critically, this form is central to the advancement of improved processes and technology tools, supporting airline performance management, safety management, organisational learning and knowledge integration/information-sharing activities. Specifically, this paper describes the background to the development of this reporting form, the logic and contents of this form and how reporting data will be made use of by airline personnel. This includes a description of the proposed intelligent planning process and the associated intelligent flight plan concept, which makes use of airline operational and safety analyses information. Primarily, this new reporting form has been developed in collaboration with a major Spanish airline. In addition, it has involved research with five other airlines. Overall, this has involved extensive field research, collaborative prototyping and evaluation of new reports/flight plan concepts and a number of evaluation activities. Participants have included both operational and management personnel, across different airline flight operations processes. Statement of Relevance: This paper presents the development of a reporting concept outlined through field research and collaborative prototyping within an airline. The resulting reporting function, embedded in the journey log compiled at the end of each flight, aims at enabling employees to audit the operations of the company they work for.

Ti6Al4V Superplastic Forming for the Production of an Aircraft Part

NASA Astrophysics Data System (ADS)

Filice, L.; Gagliardi, F.; Lazzaro, S.; Rosa, R.

2011-05-01

Titanium and its alloys have grown their importance in the automotive and aerospace industries becoming strategic materials; this is due to their mechanical properties that, perfectly, meet the needs of the above said industrial field. For example, they are characterized by a high strength vs. weight ratio that is directly related to fuel saving impacting on both economic and environmental aspects. A weakness point of these materials is linked to their workability that entails significant manufacturing costs. Taking into account these issues, it is easy to understand the reasons for the development of net shape technologies, like hot forming (HF) or superplastic forming (SPF) in order to reduce the price of titanium components. In the work here introduced, a cockpit section, known as "Pocket Support", was produced through SPF. More in detail, the influence that the strain rate can have on the quality of the final part was highlighted; for this reason, two different pressure-time curves were tested monitoring the accuracy and wall thinning of the realized parts. The experimental campaign was carried out using an ACB superplastic forming press located in the Somma Vesuviana DEMA plant. The dimension of the obtained components were checked through the structural light technique (Gray Code-Phase Shifting); in particular, a cloud of points was obtained and, subsequently, used to rebuild the actual surface of the Pocket Support. In this way, a comparison between the CAD model and the real part was possible. Moreover, the thickness distribution along a critical section was analyzed by means of a coordinate measuring machine.

A study on the effect of tool electrode thickness on MRR, and TWR in electrical discharge turning process

NASA Astrophysics Data System (ADS)

Gohil, Vikas; Puri, YM

2018-04-01

Turning by electrical discharge machining (EDM) is an emerging area of research. Generally, wire-EDM is used in EDM turning because it is not concerned with electrode tooling cost. In EDM turning wire electrode leaves cusps on the machined surface because of its small diameters and wire breakage which greatly affect the surface finish of the machined part. Moreover, one of the limitations of the process is low machining speed as compared to constituent processes. In this study, conventional EDM was employed for turning purpose in order to generate free-form cylindrical geometries on difficult-to-cut materials. Therefore, a specially designed turning spindle was mounted on a conventional die-sinking EDM machine to rotate the work piece. A conductive preshaped strip of copper as a forming tool is fed (reciprocate) continuously against the rotating work piece; thus, a mirror image of the tool is formed on the circumference of the work piece. In this way, an axisymmetric work piece can be made with small tools. The developed process is termed as the electrical discharge turning (EDT). In the experiments, the effect of machining parameters, such as pulse-on time, peak current, gap voltage and tool thickness on the MRR, and TWR were investigated and practical machining was carried out by turning of SS-304 stainless steel work piece.

Geologic literature on North America, 1785-1918; Part I, Bibliography

USGS Publications Warehouse

Nickles, John M.

1923-01-01

The bibliography forming Part I of this compilation includes papers relating to the geology paleontology, petrology, and mineralogy of North America-specifically, the United States, the Dominion of Canada and Newfoundland, the Arctic regions north of the continent, Greenland, Mexico Central America, Panama, and the West Indies including Trinidad-and also the Hawaiian Islands. Geographic and descriptive writings and accounts of travels with incidental mention of geologic facts are not included. Textbooks published in America and work general in character by American authors are given but general papers by foreign writers are excluded unless they have appeared in American publications. Papers by American writers on the geology of other parts of the world are not listed.

Collection of post mortem data: DVI protocols and quality assurance.

PubMed

Kvaal, Sigrid I

2006-05-15

In many countries forensic odontologists are members of the Disaster Victim Identification (DVI) team. As part of their post mortem (PM) tasks work on the incident site may include securing and preserving the dental material and evidence before transport to the mortuary. In the autopsy room the main aim is to register the PM dental status. Photographs and radiographs are essential documentations in addition to a conventional registration of the dental status. Abbreviations in the registration may be used if agreed with the ante mortem (AM) team. Dental age estimation may be an aid in the sorting process and especially in victims without previous dental treatment. Interpol has a form set as part of their DVI manual. Forensic odontologists working in pairs and checking each other will act as quality assurance (QA) as suggested by International Organization for Forensic Odonto-Stomatology (IOFOS). Direct entry into the computer program as part of the registration in the autopsy room may save time and manpower.

The Aerodynamic Plane Table

NASA Technical Reports Server (NTRS)

Zahm, A F

1924-01-01

This report gives the description and the use of a specially designed aerodynamic plane table. For the accurate and expeditious geometrical measurement of models in an aerodynamic laboratory, and for miscellaneous truing operations, there is frequent need for a specially equipped plan table. For example, one may have to measure truly to 0.001 inch the offsets of an airfoil at many parts of its surface. Or the offsets of a strut, airship hull, or other carefully formed figure may require exact calipering. Again, a complete airplane model may have to be adjusted for correct incidence at all parts of its surfaces or verified in those parts for conformance to specifications. Such work, if but occasional, may be done on a planing or milling machine; but if frequent, justifies the provision of a special table. For this reason it was found desirable in 1918 to make the table described in this report and to equip it with such gauges and measures as the work should require.

Research on the innovative hybrid impact hydroforming

NASA Astrophysics Data System (ADS)

Lang, Lihui; Wang, Shaohua; Yang, Chunlei

2013-12-01

The innovative hybrid impact hydro-forming (IHF) technology is a kind of high strain rate forming technique which can be used for forming complex parts with small features, such as convex tables, bars etc. The present work investigates IHF using a numerical /experimental approach. In this paper, the theory of IHF is presented and finite element simulation was carried out by using MSC. The pressure distribution changes in the depth direction, but not in the width direction. However, the pressure is uniform everywhere in traditional hydro-forming. Using this shock wave loading conditions, forming experiments were carried out. Punching occurred as a result of combined tensile and shear stress effects. Furthermore, results show that using IHF technology, the design constraint to make precise die may be considerably reduced. The need to accurately control punch-die clearance may also be eliminated. Therefore, the research is very useful for forming complicated products.

Sonic Boom Minimization Efforts on Boeing HSCT Baseline

NASA Technical Reports Server (NTRS)

Cheung, Samson H.; Fouladi, Kamran; Haglund, George; Tu, Eugene

1999-01-01

A team was formed to tackle the sonic boom softening issues of the current Boeing HSCT design. The team consisted of personnel from NASA Ames, NASA Langley, and Boeing company. The work described in this paper was done when the first author was at NASA Ames Research Center. This paper presents the sonic boom softening work on two Boeing High Speed Civil Transport (HSCT) baseline configurations, Reference-H and Boeing-1122. This presentation can be divided into two parts: parametric studies and sonic boom minimization by CFD optimization routines.

Lake Ontario geological and geophysical data sources

USGS Publications Warehouse

Hutchinson, Deborah R.; Wold, Richard J.

1979-01-01

A bibliography of various geological and geophysical data sources was compiled as part of an overall effort to evaluate the status of research on the Great Lakes.  We hope that such a summary will be a catalyst for additional work and be an aid in planning future work.  Our presentation has two forms: maps showing the locations of the different data types and a bibliography which lists the references from the maps and additional relevant papers.  The charts shown in this map summarize the data source for Lake Ontario.

Partners at work. Catholic social teaching demands that managers respect workers' rights.

PubMed

Hanley, K V

1990-01-01

For almost 100 years Catholic social teaching has demanded that workers be treated in accord with their dignity as persons created and loved by God. Numerous papal encyclicals, a statement by the 1971 Roman Synod of Bishops, and the U.S. bishops' 1986 pastoral letter all insist on workers' rights to just wages, healthful working conditions, appropriate ways of participation and freedom to form or join unions. Throughout this century the Church has taught that a just wage should provide workers and their families "a standard of living in keeping with the dignity of the human person." Just compensation should also include provisions for adequate healthcare, security for old age or disability, unemployment compensation, and other benefits. Workers should also be able to participate as fully as possible in the enterprise they are a part of. "Each person," Pope John Paul II has written, "is fully entitled to consider himself a part owner of the great workbench at which he is working with everyone else." Finally, Catholic social teaching has consistently defended the rights of all people to form or join unions. Although the existence of this right does not oblige Catholic institutions to give up what they perceive to be their own interests, it does oblige them to avoid adopting an adversarial stance toward unions and to openly acknowledge their employees' right to unionize.

Fracture Toughness to Understand Stretch-Flangeability and Edge Cracking Resistance in AHSS

NASA Astrophysics Data System (ADS)

Casellas, Daniel; Lara, Antoni; Frómeta, David; Gutiérrez, David; Molas, Sílvia; Pérez, Lluís; Rehrl, Johannes; Suppan, Clemens

2017-01-01

The edge fracture is considered as a high risk for automotive parts, especially for parts made of advanced high strength steels (AHSS). The limited ductility of AHSS makes them more sensitive to the edge damage. The traditional approaches, such as those based on ductility measurements or forming limit diagrams, are unable to predict this type of fractures. Thus, stretch-flangeability has become an important formability parameter in addition to tensile and formability properties. The damage induced in sheared edges in AHSS parts affects stretch-flangeability, because the generated microcracks propagate from the edge. Accordingly, a fracture mechanics approach may be followed to characterize the crack propagation resistance. With this aim, this work addresses the applicability of fracture toughness as a tool to understand crack-related problems, as stretch-flangeability and edge cracking, in different AHSS grades. Fracture toughness was determined by following the essential work of fracture methodology and stretch-flangeability was characterized by means of hole expansions tests. Results show a good correlation between stretch-flangeability and fracture toughness. It allows postulating fracture toughness, measured by the essential work of fracture methodology, as a key material property to rationalize crack propagation phenomena in AHSS.

The legal system. Part 1: it's not just for lawyers.

PubMed

Boylan-Kemp, Jo

This article is the first of two providing an introduction to the foundational elements of the English legal system. The 'English legal system' is a rather generic term that is often used to refer to the different sources of law and the court system in which the law is practiced. Students of law will study the English legal system as a specific topic, but it is as equally important for those who work within a profession that is regulated by the law (as nursing is) to also develop an understanding of the legal boundaries within which such a profession works. Part one, therefore, will consider the matters that form the cornerstone of our legal system, such as the constitution, and it will also explain the specific legal terms and doctrines that influence how our law is made and developed. Part two will then go on to consider the different sources of law that can be found within the English legal system. The aim of these articles is to describe these principles in a way that makes them easily understandable by those who are not involved with practicing law but who instead work within other disciplines, such as nursing.

Behind Every Successful Man: Wives of Medicine and Academe.

ERIC Educational Resources Information Center

Fowlkes, Martha R.

The way in which the lives of spouses of professional men form an integral part of their husbands' careers is addressed, based on an analysis of the lives and marriages of 40 women: 20 wives of university professors and 20 wives of doctors. Through in-depth interviews with the wives, the connections between family and work were explored. The…

The Complete Guide to Immigration and Successful Living in the United States.

ERIC Educational Resources Information Center

Access USA, Inc., Millington, NJ.

This guide is designed to provide immigrants with an understanding of the way immigration law works and information on daily life in the United States. It consists of two parts: (1) a section on immigration law, with an overview and detailed information on the types of visas available and sample immigration forms; and (2) information on American…

Review of waste package verification tests. Semiannual report, October 1982-March 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soo, P.

1983-08-01

The current study is part of an ongoing task to specify tests that may be used to verify that engineered waste package/repository systems comply with NRC radionuclide containment and controlled release performance objectives. Work covered in this report analyzes verification tests for borosilicate glass waste forms and bentonite- and zeolite-based packing mateials (discrete backfills). 76 references.

Students, Teachers and Alternative Assessment in Secondary School: Relational Models Theory (RMT) in the Field of Education

ERIC Educational Resources Information Center

Bagley, Sylvia Stralberg

2010-01-01

The quality and types of relationships formed between students and teachers has been shown to play an essential part in the personal and academic success of students (Davis, 2003; Pianta, 1999). Little, however, has been done to determine the role that assessment plays in teacher-student relationships. Drawing upon the work of cultural…

Electric Motors Everywhere: Most Forms of Energy Go through Some Conversion Process to Do Useful Work for Us

ERIC Educational Resources Information Center

Deal, Walter F., III

2004-01-01

This article discusses electric motors and the many ways in which they are used. Selecting the most appropriate miniature DC electric motor wisely will contribute toward success and satisfaction in designing and building motorized projects and activities. Typical parts suppliers stock a variety of miniature DC motors and provide sufficient…

Three Dimensional Display Of Meteorological Scientific Data

NASA Astrophysics Data System (ADS)

Grotch, Stanley L.

1988-01-01

Even a cursory reading of any daily newspaper shows that we are in the midst of a dramatic revolution in computer graphics. Virtually every day some new piece of hardware or software is announced, adding to the tools available to the working scientist. Three dimensional graphics form a significant part of this revolution having become virtually commonplace in advertising and on television.

Simmons Insurance Agency. A Clerk-Typist Position Simulation. Student Packet IV. Office Occupations.

ERIC Educational Resources Information Center

Georgia State Univ., Atlanta.

This is the fourth of five student packets forming part of a position simulation developed for use in an office applications laboratory at the postsecondary level. The purpose of the simulation is to give the student an opportunity to become familiar with the tasks and duties performed by a clerk-typist working for an independent insurance agency.…

Teaching Striking Skills in Elementary Physical Education Using Woodball

ERIC Educational Resources Information Center

Chang, Seung Ho; Lee, Jihyun

2017-01-01

Object control (OC) skills are a part of fundamental motor skills and basic functional skills, which work as a prerequisite to becoming a skilled performer in many sports. Of various OC skills, striking is one of the most difficult to master due to a variety of interrelated movement components. A form of vertical or underarm striking is a more…

Demonstration of Hydrostatic Paradox with Plastic Bottles and LabQuest Vernier

ERIC Educational Resources Information Center

Kodejška, Cenek

2018-01-01

This work focuses on the experimental demonstration of the hydrostatic paradox using simple tools in the form of plastic bottles and plastic syringes with a thread. For the evaluation of the results obtained the data logger Lab Quest Vernier was used. The construction of the device is presented in the first part of this paper. The second part…

Learning for the Working World: Vocational Training in the Federal Republic of Germany.

ERIC Educational Resources Information Center

Bildung und Wissenschaft, 1992

1992-01-01

The German education system is the responsibility of the 16 federal states. The federal government plays the leading role in regularizing the on-the-job section of occupational training in the dual system. Other forms of occupational training are full-time vocational schools and further full-time vocational training schools. The on-the-job part of…

Damage Resistance of Titanium Aluminide Evaluated

NASA Technical Reports Server (NTRS)

Lerch, Bradley A.; Draper, Susan L.; Baaklini, George Y.; Pereira, J. Michael; Austin, Curt

2000-01-01

As part of the aviation safety goal to reduce the aircraft accident rate, NASA has undertaken studies to develop durable engine component materials. One of these materials, g-TiAl, has superior high-temperature material properties. Its low density provides improved specific strength and creep resistance in comparison to currently used titanium alloys. However, this intermetallic is inherently brittle, and long life durability is a potential problem. Of particular concern is the material s sensitivity to defects, which may form during the manufacturing process or in service. To determine the sensitivity of TiAl to defects, a team consisting of GE Aircraft Engines, Precision Cast Parts, and NASA was formed. The work at the NASA Glenn Research Center at Lewis Field has concentrated on the fatigue response to specimens containing defects. The overall objective of this work is to determine the influence of defects on the high cycle fatigue life of TiAl-simulated low-pressure turbine blades. Two types of defects have been introduced into the specimens: cracking from impact damage and casting porosity. For both types of defects, the cast-to-size fatigue specimens were fatigue tested at 650 C and 100 Hz until failure.

Con-forming bodies: the interplay of machines and bodies and the implications of agency in medical imaging.

PubMed

Wood, Lisa A

2016-06-01

Attending to the material discursive constructions of the patient body within cone beam computed tomography (CBCT) imaging in radiotherapy treatments, in this paper I describe how bodies and machines co-create images. Using an analytical framework inspired by Science and Technology Studies and Feminist Technoscience, I describe the interplay between machines and bodies and the implications of materialities and agency. I argue that patients' bodies play a part in producing scans within acceptable limits of machines as set out through organisational arrangements. In doing so I argue that bodies are fabricated into the order of work prescribed and embedded within and around the CBCT system, becoming, not only the subject of resulting images, but part of that image. The scan is not therefore a representation of a passive subject (a body) but co-produced by the work of practitioners and patients who actively control (and contort) and discipline their body according to protocols and instructions and the CBCT system. In this way I suggest they are 'con-forming' the CBCT image. A Virtual Abstract of this paper can be found at: https://youtu.be/qysCcBGuNSM. © 2015 Foundation for the Sociology of Health & Illness.

Are doctors unhappy? A study of residents with an open interview form.

PubMed

Bergin, Elsmari; Johansson, Helen; Bergin, Rolf

2004-01-01

Several recent reports show that many physicians feel discontented and unhappy with their work situation. This could in part be due to a decline in status, loss of influence on health care organization, reduced wages etc. It is important to find ways to better understand their experiences of working life to get more facets of this issue. The Medical Management Centre at the Karolinska Institute in Stockholm offers courses in leadership for physicians in specialty training (residency). Participants in 2 courses were used in a study of their views of their work situation and their employer, using an open interview form. The results with the residents in the present study do not support the statement that physicians are unhappy. On the contrary, findings in the study indicate that they have a predominantly positive view of their work situation and of their employer. It is proposed that the mixed feelings they show to some extent is a natural stage in professional development. A possible way for achieving a better dialogue between physicians and managers is suggested.

Hours of work and rest in the rail industry.

PubMed

Anderson, C; Grunstein, R R; Rajaratnam, S M W

2013-06-01

Currently, the National Transport Commission is considering four options to form the regulatory framework for rail safety within Australia with respect to fatigue. While the National Transport Commission currently recommends no limitations around hours of work or rest, we provide evidence which suggests regulatory frameworks should incorporate a traditional hours of service regulation over more flexible policies. Our review highlights: Shift durations >12 h are associated with a doubling of risk for accident and injury. Fatigue builds cumulatively with each successive shift where rest in between is inadequate (<12 h). A regulatory framework for fatigue management within the rail industry should prescribe limits on hours of work and rest, including maximum shift duration and successive number of shifts. Appropriately, validated biomathematical models and technologies may be used as a part of a fatigue management system, to augment the protection afforded by limits on hours of work and rest. A comprehensive sleep disorder screening and management programme should form an essential component of any regulatory framework. © 2013 The Authors; Internal Medicine Journal © 2013 Royal Australasian College of Physicians.

Assessing edge cracking resistance in AHSS automotive parts by the Essential Work of Fracture methodology

NASA Astrophysics Data System (ADS)

Frómeta, D.; Tedesco, M.; Calvo, J.; Lara, A.; Molas, S.; Casellas, D.

2017-09-01

Lightweight designs and demanding safety requirements in automotive industry are increasingly promoting the use of Advanced High Strength Steel (AHSS) sheets. Such steels present higher strength (above 800 MPa) but lower ductility than conventional steels. Their great properties allow the reduction of the thickness of automobile structural components without compromising the safety, but also introduce new challenges to parts manufacturers. The fabrication of most cold formed components starts from shear cut blanks and, due to the lower ductility of AHSS, edge cracking problems can appear during forming operations, forcing the stop of the production and slowing down the industrial process. Forming Limit Diagrams (FLD) and FEM simulations are very useful tools to predict fracture problems in zones with high localized strain, but they are not able to predict edge cracking. It has been observed that the fracture toughness, measured through the Essential Work of Fracture (EWF) methodology, is a good indicator of the stretch flangeability in AHSS and can help to foresee this type of fractures. In this work, a serial production automotive component has been studied. The component showed cracks in some flanged edges when using a dual phase steel. It is shown that the conventional approach to explain formability, based on tensile tests and FLD, fails in the prediction of edge cracking. A new approach, based on fracture mechanics, help to solve the problem by selecting steel grades with higher fracture toughness, measured by means of EWF. Results confirmed that fracture toughness, in terms of EWF, can be readily used as a material parameter to rationalize cracking related problems and select AHSS with improved edge cracking resistance.

A man of his country and his time: Jewish influences on Lev Semionovich Vygotsky's world view.

PubMed

Kotik-Friedgut, Bella; Friedgut, Theodore H

2008-02-01

Lev Semionovich Vygotsky created the cultural-historical school of psychology, yet all too few of those writing about his work take into account the family, education, and cultural tradition from which he came. The authors contend that the Jewish nature of these elements was of some importance in forming his personality and his consciousness. The 1st part of the article traces his early upbringing, describes the Jewishness of his environment, notes 3 instances in which his "otherness" was imprinted on his consciousness, and points to the sources of his determination to forge a harmonious synthesis with his environment. The 2nd part examines his writings, both earlier journalistic and mature psychological, and points to evidence of the influence of his Jewish upbringing and environment on his work.

Lattice Gauge Theories Within and Beyond the Standard Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gelzer, Zechariah John

The Standard Model of particle physics has been very successful in describing fundamental interactions up to the highest energies currently probed in particle accelerator experiments. However, the Standard Model is incomplete and currently exhibits tension with experimental data for interactions involvingmore » $B$~mesons. Consequently, $B$-meson physics is of great interest to both experimentalists and theorists. Experimentalists worldwide are studying the decay and mixing processes of $B$~mesons in particle accelerators. Theorists are working to understand the data by employing lattice gauge theories within and beyond the Standard Model. This work addresses the theoretical effort and is divided into two main parts. In the first part, I present a lattice-QCD calculation of form factors for exclusive semileptonic decays of $B$~mesons that are mediated by both charged currents ($$B \\to \\pi \\ell \

[Women in informal economy health and work conditions Bogotá. 2007].

PubMed

Sotelo-Suárez, Nidia R; Quiroz-Arcentáles, Jorge L; Mahecha-Montilla, Charo P; López-Sánchez, Paola A

2012-06-01

To determine work and health conditions of women working in informal economy in Bogotá, as well as to recommend priority action plans for preventing illnesses and accidents related to work and their consequences. Descriptive observational study. This study analyzed information collected by local groups in work-related contexts during 2007 as part of a set of forms of intervention established according to the Plan de Atención Básica (Primary Care Plan). This plan included 3 715 units of informal work from every point of the city. 3 936 women registers in all were analyzed. This study reveals evident precariousness conditions of women in this economic sector. Specifically, there are certain evident conditions that had shown in this study such as low education levels, incomes below the minimum legal standards, high exposure to damaging health work conditions, long work hours, and few hours for leisure and free time. Furthermore, 75 % of women included in this study are female head of household. This condition makes them more vulnerable to a heavier family and social burden. Closer attention to informal economy phenomenon is suggested in order to avoid vulnerable conditions of working women. Besides, it is necessary to improve the articulation between Academy and forms of intervention through public policies for knowing deeply repeated phenomena regarding the population of study. This articulation can be thought for implementing programs designed for improving women's quality of life.

Clinical supervision: an important part of every nurse's practice.

PubMed

Bifarin, Oladayo; Stonehouse, David

2017-03-23

Clinical supervision involves a supportive relationship between supervisor and supervisee that facilitates reflective learning and is part of professional socialisation. Clinical supervision can take many different forms and may be adapted to suit local circumstances. A working agreement is required between the parties to the supervision and issues surrounding confidentiality must be understood. High-quality clinical supervision leads to greater job satisfaction and less stress. When it is absent or inadequate, however, the results can be serious and it is particularly important that student nurses are well supported in this way. Further research in this area is necessary.

The digestive system: part 1.

PubMed

Johnstone, Carolyn; Hendry, Charles; Farley, Alistair; McLafferty, Ella

This article, which forms part of the life sciences series and is the first of two articles on the digestive system, explores the structure and function of the digestive system. It is important that nurses understand how the digestive system works and its role in maintaining health. The article describes the gross structure of the gastrointestinal tract along with relevant physiology. It also outlines several disorders of the gastrointestinal tract and their treatment and nursing management. The second article will explain the liver, pancreas and gall bladder and their digestive functions, and provides a brief overview of the disorders of chronic liver disease, pancreatitis and gallstones.

High Integrity Castings: Proceedings of the Conference on Advances in High Integrity Castings Held in Conjunction with the 1988 World Materials Congress, Chicago, Illinois, USA, 24-30 September 1988

DTIC Science & Technology

1988-01-01

above design requirements. The The first cast parts used in this higher strength standard chemistry parts application were of the Extra Low...present work was to study the use of beta THE HIGH COST OF TITANIUM alloys can limit their titanium alloys in the cast form. Beta or use to applications ...refractory as was is intended to achieve a pouring stream su- used with the nozzles for steel applications . perior to conventional nozzle designs , and this

Endocrine system: part 1.

PubMed

Johnstone, Carolyn; Hendry, Charles; Farley, Alistair; McLafferty, Ella

2014-05-27

This article, which forms part of the life sciences series and is the first of two articles on the endocrine system, examines the structure and function of the organs of the endocrine system. It is important that nurses understand how the endocrine system works and its role in maintaining health. The role of the endocrine system and the types, actions and control of hormones are explored. The gross structure of the pituitary and thyroid glands are described along with relevant physiology. Several disorders of the thyroid gland are outlined. The second article examines growth hormone, the pancreas and adrenal glands.

The Theory and Practice of Genre Criticism: Genre Criticism: The Analysis of Form, Part I; Genre Criticism: Judgment Argument and Evidence, Part II; [and] Genre Criticism: A Topical Bibliography, Part III.

ERIC Educational Resources Information Center

Creps, Earl

A three-part study of the forms of rhetorical criticism is offered. Part one reviews the nature of genre criticism, enumerates several concepts of form and the types of genre criticism they produce, and discusses the implications of this relationship between form and genre. Part two is an essay on the methodological implications of form-grounded…

A Study on Infrared Local Heat Treatment for AA5083 to Improve Formability and Automotive Part Forming

NASA Astrophysics Data System (ADS)

Lee, Eun-Ho; Yang, Dong-Yol; Ko, SeJin

2017-10-01

Automotive industries are increasingly employing aluminum alloys for auto parts to reduce vehicle weight. However, the low formability of aluminum alloys has been an obstacle to their application. To resolve the formability problem, some studies involving heat treatments under laboratory conditions have been reported. However, for industrial applications, the heat treatment sequence, heating energy efficiency, and a commercial part test should be studied. This work shows an infrared (IR) local heat treatment, heating only small areas where the heat treatment is required, for an aluminum alloy to improve the formability with a reduction of heating energy. The experiment shows that the formability drastically increases when the aluminum alloy is heat treated between two forming stages, referred to as intermediate heat treatment. The microstructures of the test pieces are evaluated to identify the cause of the increase in the formability. For an industrial application, an aluminum tailgate, which cannot be manufactured without heat treatment, was successfully manufactured by the IR local heat treatment with a reduction of energy. A simulation was also conducted with a stress-based forming limit diagram, which is not affected by the strain path and heat treatment histories. The simulation gives a good prediction of the formability improvement.

Foucault's notion of problematization: a methodological discussion of the application of Foucault's later work to nursing research.

PubMed

Frederiksen, Kirsten; Lomborg, Kirsten; Beedholm, Kirsten

2015-09-01

This study takes its point of departure in an oft-voiced critique that the French philosopher Michel Foucault gives discourse priority over practice, thereby being deterministic and leaving little space for the individual to act as an agent. Based on an interpretation of the latter part of Foucault's oeuvre, we argue against this critique and provide a methodological discussion of the perception that Foucault's method constitutes, primarily, discourse analysis. We argue that it is possible to overcome this critique of Foucault's work by the application of methodological tools adapted from Foucault's later writings and his diagnosis of his own work as studies of forms of problematization. To shed light on the possibilities that this approach offers to the researcher, we present a reading of aspects of Foucault's work, with a focus on his notion of forms of problematization. Furthermore, we elaborate on concepts from his so-called genealogical period, namely 'the dispositive', strategy and tactics. Our interpretation is supported by examples from a study of the emergence of Danish nursing education, which is based on an analytical framework that we developed in the light of an interpretation of aspects of Foucault's work. © 2015 John Wiley & Sons Ltd.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Danguy des Deserts, L.M.J.; Michael, D.; Sedillot, F.G.

An oscillating platform is described for work at sea, the platform having a weight, comprising a deck, a lattice tower having an upper part and a lower part, the tower further having a total buoyancy center, and a center of gravity, an articulation formed by flexible piles. The articulation has a center; the flexible piles are driven into the sea bed and fixed to the upper part of the tower; the tower comprising floaters in its upper part and a ballast compartment in its lower part, as well as means for resisting shear forces; the product of the total buoyancymore » of the tower by the distance between the buoyancy center of the tower and the center of the articulation are at least equal to 1.25 times the product of the weight of the platform by the distance between the center of gravity of the platform and the center of the articulation.« less

New Mexico district work-effort analysis computer program

USGS Publications Warehouse

Hiss, W.L.; Trantolo, A.P.; Sparks, J.L.

1972-01-01

The computer program (CAN 2) described in this report is one of several related programs used in the New Mexico District cost-analysis system. The work-effort information used in these programs is accumulated and entered to the nearest hour on forms completed by each employee. Tabulating cards are punched directly from these forms after visual examinations for errors are made. Reports containing detailed work-effort data itemized by employee within each project and account and by account and project for each employee are prepared for both current-month and year-to-date periods by the CAN 2 computer program. An option allowing preparation of reports for a specified 3-month period is provided. The total number of hours worked on each account and project and a grand total of hours worked in the New Mexico District is computed and presented in a summary report for each period. Work effort not chargeable directly to individual projects or accounts is considered as overhead and can be apportioned to the individual accounts and projects on the basis of the ratio of the total hours of work effort for the individual accounts or projects to the total New Mexico District work effort at the option of the user. The hours of work performed by a particular section, such as General Investigations or Surface Water, are prorated and charged to the projects or accounts within the particular section. A number of surveillance or buffer accounts are employed to account for the hours worked on special events or on those parts of large projects or accounts that require a more detailed analysis. Any part of the New Mexico District operation can be separated and analyzed in detail by establishing an appropriate buffer account. With the exception of statements associated with word size, the computer program is written in FORTRAN IV in a relatively low and standard language level to facilitate its use on different digital computers. The program has been run only on a Control Data Corporation 6600 computer system. Central processing computer time has seldom exceeded 5 minutes on the longest year-to-date runs.

Standardization of quantum technologies and QKD activities within ETSI (Conference Presentation)

NASA Astrophysics Data System (ADS)

Lenhart, Gaby

2016-04-01

In order to establish new ICT technologies successfully on the market it is essential to build trust within any potential users. This is especially true for technologies which are based upon paradigms that are not yet familiar to these users, such as quantum technologies. Technical standards are an excellent means to offer a certain degree of legal reliability and technical interoperability that is required by industry for commercial take up. While such standards on the one hand must be clear enough to provide strict rules for implementers, on the other hand they also must remain flexible enough to not restrict progress in further research and development on the standardized technology. Hence such standards have to be produced by a wide variety of stakeholders taking into account all their different needs. The paper will provide some insight into the general mechanisms of standardization and their relation to quantum technologies. Alongside with the relevance of standardization as an enabler for certification of quantum based technologies it will explain its potential for securing intellectual property. In its first part paper will concentrate on the advantages of standardization and discuss fears some of the stakeholders share, in detail. The second part will focus on the technical work going on in ETSI in relation to quantum technologies. In 2008 ETSI created a standards work group on Quantum Key Distribution, the ETSI ISG QKD and more recently a group on Quantum-Safe Cryptography, the ETSI ISG QSC. A significant part of the technical work of these groups has already been published and will be introduced in the following. However a big share of work is still ongoing and lot more is planned for the future, as are continuous revisions and updates of the published specifications. This standardization work covers several levels: It starts of by problem statements in the form of use cases, from which technical requirements can be derived. These requirements then form the base upon which a reference architecture is created. Various different specifications describe in detail components, protocols and interfaces. An ontology is developed in order to guarantee common understanding of the technical terms used in standardization for quantum technologies. Special emphasis is provided to security proofs.

On the manufacturing of a gas turbine engine part through metal spinning process

NASA Astrophysics Data System (ADS)

Hassanin, A. El; Astarita, A.; Scherillo, F.; Velotti, C.; Squillace, A.; Liguori, A.

2018-05-01

Metal spinning processes represents an interesting alternative to traditional sheet metal forming processes in several industrial contexts, such as automotive and aerospace. In this work, the production of a combustion chamber liner top prototype using AISI 304L stainless steel is proposed, in order to evaluate the process feasibility for the required part geometry. The prototypes production was carried out using a two-stage semiautomatic spinning process. The effects in terms of wall thickness reduction were investigated. Using optical microscopy and Scanning Electron Microscopy (SEM) techniques, the microstructural behavior of the metal subjected to the forming process was investigated, while for an evaluation of the influence on the mechanical properties Vickers micro-indentation tests were performed. The main result of the process, as observed from all the investigation techniques adopted, is the formation of strain induced martensite due to the severe plastic deformation and cold reduction of the material, ranging in this case from 30% to 50%. In some areas of the part section, some rips indicating an excessive tensile stress were also detected.

A national industrial health service on a voluntary basis.

PubMed

NATVIG, H

1955-01-01

In Norway-a country with a population of about 3.2 million-the largest occupational group is employed in manufacturing and trade, which accounted for a total of 480 000 individuals in 1946. Most industries are small, only about 100 firms having more than 500 workers. As industry developed, there arose an increasing need for organizing a special plant health service, with the aim of protecting and promoting the health of the workers.Certain regulations were worked out, and in 1945 a general agreement was made between the Norwegian Medical Association, the Norwegian Employers' Association, and the Norwegian Federation of Labour; a tripartite body was then formed, the Board of Industrial Health Service, to give information and advice to industries. This plant health service is based on voluntary mutual agreement and not on legislation.All expenses for the plant health service are met by the industry itself. In firms with no special occupational health problems, the physician works one hour per week per 100 workers; in firms with special problems, two hours. The duties of the plant physician consist in giving the employees pre-employment and periodical health examinations, and health guidance, and carrying out other preventive measures. First aid, treatment for occupational diseases not requiring absence from work, and treatment of certain minor ailments are the only forms of therapy given at the plant. Workers in need of further medical treatment are referred to general practitioners or hospitals. Absenteeism is recorded in a uniform way in all industries that have joined this industrial health service. The plant physician has to submit an annual report on his work to the Board of Industrial Health Service.This system of industrial health service has given very good results. In 1953, 653 plants were participating with about 186 000 workers. About 260 active plant physicians are to be found in Norway at present, most of them working on a part-time basis. The cost of this service is about 20-30 Norwegian kroner (3-4 US dollars) per worker per year.There is co-operation and co-ordination between the industrial health services and the public health services. Many local public health officers work as part-time industrial physicians, and many industrial physicians co-operate closely with the local boards of health, especially in the field of tuberculosis control.The special form of industrial health service adopted in Norway has sprung out of the particular situation there, which made possible the establishment of an industrial health service without danger of weakening the medical services as a whole. Any lack of physicians would have prevented the creation of this service, and the system is therefore not to be recommended for a country with a shortage of physicians. The geographical extent of Norway and the difficult communications in many places have necessitated the delegation of preventive health work mainly to the private physicians, the health centres and institutes playing but a small part in such work.

A national industrial health service on a voluntary basis*

PubMed Central

Natvig, Haakon

1955-01-01

In Norway—a country with a population of about 3.2 million—the largest occupational group is employed in manufacturing and trade, which accounted for a total of 480 000 individuals in 1946. Most industries are small, only about 100 firms having more than 500 workers. As industry developed, there arose an increasing need for organizing a special plant health service, with the aim of protecting and promoting the health of the workers. Certain regulations were worked out, and in 1945 a general agreement was made between the Norwegian Medical Association, the Norwegian Employers' Association, and the Norwegian Federation of Labour; a tripartite body was then formed, the Board of Industrial Health Service, to give information and advice to industries. This plant health service is based on voluntary mutual agreement and not on legislation. All expenses for the plant health service are met by the industry itself. In firms with no special occupational health problems, the physician works one hour per week per 100 workers; in firms with special problems, two hours. The duties of the plant physician consist in giving the employees pre-employment and periodical health examinations, and health guidance, and carrying out other preventive measures. First aid, treatment for occupational diseases not requiring absence from work, and treatment of certain minor ailments are the only forms of therapy given at the plant. Workers in need of further medical treatment are referred to general practitioners or hospitals. Absenteeism is recorded in a uniform way in all industries that have joined this industrial health service. The plant physician has to submit an annual report on his work to the Board of Industrial Health Service. This system of industrial health service has given very good results. In 1953, 653 plants were participating with about 186 000 workers. About 260 active plant physicians are to be found in Norway at present, most of them working on a part-time basis. The cost of this service is about 20-30 Norwegian kroner (3-4 US dollars) per worker per year. There is co-operation and co-ordination between the industrial health services and the public health services. Many local public health officers work as part-time industrial physicians, and many industrial physicians co-operate closely with the local boards of health, especially in the field of tuberculosis control. The special form of industrial health service adopted in Norway has sprung out of the particular situation there, which made possible the establishment of an industrial health service without danger of weakening the medical services as a whole. Any lack of physicians would have prevented the creation of this service, and the system is therefore not to be recommended for a country with a shortage of physicians. The geographical extent of Norway and the difficult communications in many places have necessitated the delegation of preventive health work mainly to the private physicians, the health centres and institutes playing but a small part in such work. PMID:13276821

How International Large-Scale Skills Assessments Engage with National Actors: Mobilising Networks through Policy, Media and Public Knowledge

ERIC Educational Resources Information Center

Hamilton, Mary

2017-01-01

This paper examines how international, large-scale skills assessments (ILSAs) engage with the broader societies they seek to serve and improve. It looks particularly at the discursive work that is done by different interest groups and the media through which the findings become part of public conversations and are translated into usable form in…

Active Computer Network Defense: An Assessment

DTIC Science & Technology

2001-04-01

sufficient base of knowledge in information technology can be assumed to be working on some form of computer network warfare, even if only defensive in...the Defense Information Infrastructure (DII) to attack. Transmission Control Protocol/ Internet Protocol (TCP/IP) networks are inherently resistant to...aims to create this part of information superiority, and computer network defense is one of its fundamental components. Most of these efforts center

Handbook of Home Health Standards - Fifth edition Marrelli Tina M Handbook of Home Health Standards - Fifth edition 688pp Elsevier 9780323052245 032305224X [Formula: see text].

PubMed

2009-06-03

Home care is different from other forms of health care. Clinicians are guests in patients' homes and may be the only healthcare providers patients see on a particular day or week, so they should feel comfortable working independently, but recognise they are part of a larger healthcare team.

"Pleasure Has No Passport": Re-Visiting the Potential of Pleasure in Sexuality Education

ERIC Educational Resources Information Center

Allen, Louisa; Carmody, Moira

2012-01-01

The idea that pleasure might form a part of sexuality education is no longer a "new" idea in the field of sexuality studies. In this paper we examine how originally conceived notions of pleasure have been "put to work" and theoretically "taken up" in relation to sexuality and education. It is our contention that because of the nature of discourse…

The Infernal Business of Contract Cheating: Understanding the Business Processes and Models of Academic Custom Writing Sites

ERIC Educational Resources Information Center

Ellis, Cath; Zucker, Ian Michael; Randall, David

2018-01-01

While there is growing awareness of the existence and activities of Academic Custom Writing websites, which form a small part of the contract cheating industry, how they work remains poorly understood. Very little research has been done on these sites, probably because it has been assumed that it is impossible to see behind their firewalls and…

Practice, supervision, consultancy and appraisal: a continuum of learning.

PubMed Central

Launer, John

2003-01-01

I examine four different kinds of learning conversation: reflective practice, clinical supervision, work consultancy and performance appraisal. I propose that there is a close and reciprocal relationship between these kinds of conversation, and that they represent different aspects of a unified field, or continuum. I argue that appraisal should be seen as part of this learning continuum rather than as form of monitoring. PMID:14601347

"It's All Becoming a Habitus": Beyond the Habitual Use of Habitus in Educational Research

ERIC Educational Resources Information Center

Reay, Diane

2004-01-01

The concept of habitus lies at the heart of Bourdieu's theoretical framework. It is a complex concept that takes many shapes and forms in Bourdieu's own writing, even more so in the wider sociological work of other academics. In the first part of this paper I develop an understanding of habitus, based on Bourdieu's many writings on the concept,…

Synergies in Critical Reflective Practice and Science: Science as Reflection and Reflection as Science

ERIC Educational Resources Information Center

Mathieson, Luke

2016-01-01

The conceptions of reflective practice in education have their roots at least partly in the work of Dewey, who describes reflection as "the active, persistent, and careful consideration of any belief or supposed form of knowledge in the light of the grounds that support it and the further conclusions to which it tends" (Dewey 1933, p.9).…

An Introductory Global Overview: The Private Fit to Salient Higher Education Tendencies. PROPHE Working Paper Series. WP No. 7

ERIC Educational Resources Information Center

Levy, Daniel C.

2006-01-01

Private higher education has surged in recent decades and now forms a major part of the world's total higher education. A fourth of total enrollment might be a reasonable guess, albeit a very rough one. Only Western Europe remains mostly marginal to the global trend. Whether new or continuing, contemporary private growth is notable, especially in…

Modeling Behavior of Students in E-Learning Courses on the Basis of Use Interactive Animations

ERIC Educational Resources Information Center

Magdin, Martin; Turcáni, Milan

2016-01-01

Authors in their contribution deal with modeling the behavior of user in e-learning course based on the use of interactive animations. Nowadays, E-learning courses form a standard part of educational process. However, it is not so easy to determine the way students work with study material, whether they make use of it in order to increase didactic…

The Comparison of Two Forms of a Classroom Simulation Test Designed To Enhance Future Teachers Self-Definition and Teaching Style. Final Report.

ERIC Educational Resources Information Center

Garrison, Jesse H.; Kersh, Bert Y.

The experiment reported in this document is based on the work of Garrison and others in developing a testing and interviewing procedure designed to enable increased self-definition on the part of prospective teachers and earlier development of appropriate and effective teaching styles. Three groups of elementary education majors were involved in…

Life Cycle Costing: A Working Level Approach

DTIC Science & Technology

1981-06-01

Effects Analysis ( FMEA ) ...... ................ .. 59 Logistics Performance Factors (LPFs) 60 Planning the Use of Life Cycle Cost in the Demonstration...form. Failure Mode and Effects Analysis ( FMEA ). Description. FMEA is a technique that attempts to improve the design of any particular unit. The FMEA ...failure modes and also eliminate extra parts or ones that are used to achieve more performance than is necessary (16:5-14]. Advantages. FMEA forces

Structural properties of H13 tool steel parts produced with use of selective laser melting technology

NASA Astrophysics Data System (ADS)

Šafka, J.; Ackermann, M.; Voleský, L.

2016-04-01

This paper deals with establishing of building parameters for 1.2344 (H13) tool steel processed using Selective Laser Melting (SLM) technology with layer thickness of 50 µm. In the first part of the work, testing matrix of models in the form of a cube with chamfered edge were built under various building parameters such as laser scanning speed and laser power. Resulting models were subjected to set of tests including measurement of surface roughness, inspection of inner structure with aid of Light Optical Microscopy and Scanning Electron Microscopy and evaluation of micro-hardness. These tests helped us to evaluate an influence of changes in building strategy to the properties of the resulting model. In the second part of the work, mechanical properties of the H13 steel were examined. For this purpose, the set of samples in the form of “dog bone” were printed under three different alignments towards the building plate and tested on universal testing machine. Mechanical testing of the samples should then reveal if the different orientation and thus different layering of the material somehow influence its mechanical properties. For this type of material, the producer provides the parameters for layer thickness of 30 µm only. Thus, our 50 µm building strategy brings shortening of the building time which is valuable especially for large models. Results of mechanical tests show slight variation in mechanical properties for various alignment of the sample.

Experimental Physics

NASA Astrophysics Data System (ADS)

Wilson, Harold A.

2014-05-01

Preface; Introduction; Part I. Mechanics and Properties of Matter: 1. Space and time; 2. Motion; 3. The laws of motion and matter; 4. Force and motion; 5. Work and study; 6. Mechanics of rigid bodies; 7. Gravitation; 8. Elasticity; 9. The properties of liquids; Part II. Heat: 1. Temperature; 2. The expansion of solid bones with rise of temperature; 3. The expansion of liquids with rise of temperature; 4. The properties of gases; 5. Quantity of heat. Specific heat; 6. Change of state. Solid-liquid; 7. Change of state. Liquid-vapour; 8. Convection and conduction; 9. Heat a form of energy; 10. The conversion of heat into work; 11. The kinetic theory of gases; Part III. Sound: 1. Production and velocity of sound; 2. Wave motion; 3. Wave trains; 4. Musical notes; 5. Reflection, refraction, interference of sound and composition of perpendicular vibrations; 6. Resonance; 7. Vibration of strings; 8. Vibration of air in open and closed spaces; Part IV. Light: 1. Sources of light. Photometry; 2. Reflection and refraction at plane surfaces; 3. Spherical mirrors; 4. Lenses; 5. Dispersion; 6. Colour; 7. Optical instruments; 8. The velocity of light; 9. Interference and diffraction; 10. Polarization and double refraction; 11. Energy of light. Invisible radiations; Index.

Parametric analysis of plastic strain and force distribution in single pass metal spinning

NASA Astrophysics Data System (ADS)

Choudhary, Shashank; Tejesh, Chiruvolu Mohan; Regalla, Srinivasa Prakash; Suresh, Kurra

2013-12-01

Metal spinning also known as spin forming is one of the sheet metal working processes by which an axis-symmetric part can be formed from a flat sheet metal blank. Parts are produced by pressing a blunt edged tool or roller on to the blank which in turn is mounted on a rotating mandrel. This paper discusses about the setting up a 3-D finite element simulation of single pass metal spinning in LS-Dyna. Four parameters were considered namely blank thickness, roller nose radius, feed ratio and mandrel speed and the variation in forces and plastic strain were analysed using the full-factorial design of experiments (DOE) method of simulation experiments. For some of these DOE runs, physical experiments on extra deep drawing (EDD) sheet metal were carried out using En31 tool on a lathe machine. Simulation results are able to predict the zone of unsafe thinning in the sheet and high forming forces that are hint to the necessity for less-expensive and semi-automated machine tools to help the household and small scale spinning workers widely prevalent in India.

Conservaton and retrieval of information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jensen, M.

This is a summary of the findings of a Nordic working group formed in 1990 and given the task of establishing a basis for a common Nordic view of the need for information conservation for nuclear waste repositories by investigating the following: (1) the type of information that should be conserved; (2) the form in which the information should be kept; (3) the quality of the information as regards both type and form; and (4) the problems of future retrieval of information, including retrieval after very long periods of time. High-level waste from nuclear power generation will remain radioactive formore » very long times even though the major part of the radioactivity will have decayed within 1000 yr. Certain information about the waste must be kept for long time periods because future generations may-intentionally or inadvertently-come into contact with the radioactive waste. Current day waste management would benefit from an early identification of documents to be part of an archive for radioactive waste repositories. The same reasoning is valid for repositories for other toxic wastes.« less

Class in construction: London building workers, dirty work and physical cultures.

PubMed

Thiel, Darren

2007-06-01

Descriptions of manual employment tend to ignore its diversity and overstate the homogenizing effects of technology and industrialization. Based on ethnographic research on a London construction site, building work was found to be shaped by the forms of a pre-industrial work pattern characterized by task autonomy and freedom from managerial control. The builders' identities were largely free from personal identification as working class, and collective identification was fractured by trade status, and ethnic and gender divisions. Yet the shadow of a class-based discursive symbolism, which centered partly on the division of minds/bodies, mental/manual, and clean/dirty work, framed their accounts, identities and cultures. The builders displayed what is frequently termed working-class culture, and it was highly masculine. This physical and bodily-centered culture shielded them from the possible stigmatization of class and provided them with a source of localized capital. 'Physical capital' in conjunction with social capital (the builders' networks of friends and family) had largely guided their position in the stratification system, and values associated with these forms of capital were paramount to their public cultures. This cultural emphasis offered a continuing functionality in the builders' lives, not having broken free from tradition or becoming an object of reflexive choice.

Unirradiated testing of the demonstration-scale ceramic waste form at ANL-West

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goff, K.M.; Simpson, M.F.; Bateman, K.J.

1997-12-01

The ceramic waste form is being developed by Argonne National Laboratory (ANL) as part of the demonstration of the electrometallurgical treatment of spent nuclear fuel for disposal. The alkali, alkaline earth, halide, and rare earth fission products are stabilized in zeolite, which is combined with glass and processed in a hot isostatic press (HIP) to form a ceramic composite. The transuranics, including plutonium, are also stabilized in this high-level waste. Most of the laboratory-scale development work is performed in the Chemical Technology Division of ANL in Illinois. At ANL-West in Idaho, this technology is being demonstrated on an engineering scalemore » before implementation with irradiated materials in a remote environment.« less

Combustion chemistry and flame structure of furan group biofuels using molecular-beam mass spectrometry and gas chromatography – Part III: 2,5-Dimethylfuran

PubMed Central

Togbé, Casimir; Tran, Luc-Sy; Liu, Dong; Felsmann, Daniel; Oßwald, Patrick; Glaude, Pierre-Alexandre; Sirjean, Baptiste; Fournet, René; Battin-Leclerc, Frédérique; Kohse-Höinghaus, Katharina

2013-01-01

This work is the third part of a study focusing on the combustion chemistry and flame structure of furan and selected alkylated derivatives, i.e. furan in Part I, 2-methylfuran (MF) in Part II, and 2,5-dimethylfuran (DMF) in the present work. Two premixed low-pressure (20 and 40 mbar) flat argon-diluted (50%) flames of DMF were studied with electron-ionization molecular-beam mass spectrometry (EI-MBMS) and gas chromatography (GC) under two equivalence ratios (φ=1.0 and 1.7). Mole fractions of reactants, products, and stable and radical intermediates were measured as a function of the distance to the burner. Kinetic modeling was performed using a reaction mechanism that was further developed in the present series, including Part I and Part II. A reasonable agreement between the present experimental results and the simulation is observed. The main reaction pathways of DMF consumption were derived from a reaction flow analysis. Also, a comparison of the key features for the three flames is presented, as well as a comparison between these flames of furanic compounds and those of other fuels. An a priori surprising ability of DMF to form soot precursors (e.g. 1,3-cyclopentadiene or benzene) compared to less substituted furans and to other fuels has been experimentally observed and is well explained in the model. PMID:24518851

Combustion chemistry and flame structure of furan group biofuels using molecular-beam mass spectrometry and gas chromatography - Part III: 2,5-Dimethylfuran.

PubMed

Togbé, Casimir; Tran, Luc-Sy; Liu, Dong; Felsmann, Daniel; Oßwald, Patrick; Glaude, Pierre-Alexandre; Sirjean, Baptiste; Fournet, René; Battin-Leclerc, Frédérique; Kohse-Höinghaus, Katharina

2014-03-01

This work is the third part of a study focusing on the combustion chemistry and flame structure of furan and selected alkylated derivatives, i.e. furan in Part I, 2-methylfuran (MF) in Part II, and 2,5-dimethylfuran (DMF) in the present work. Two premixed low-pressure (20 and 40 mbar) flat argon-diluted (50%) flames of DMF were studied with electron-ionization molecular-beam mass spectrometry (EI-MBMS) and gas chromatography (GC) under two equivalence ratios (φ=1.0 and 1.7). Mole fractions of reactants, products, and stable and radical intermediates were measured as a function of the distance to the burner. Kinetic modeling was performed using a reaction mechanism that was further developed in the present series, including Part I and Part II. A reasonable agreement between the present experimental results and the simulation is observed. The main reaction pathways of DMF consumption were derived from a reaction flow analysis. Also, a comparison of the key features for the three flames is presented, as well as a comparison between these flames of furanic compounds and those of other fuels. An a priori surprising ability of DMF to form soot precursors (e.g. 1,3-cyclopentadiene or benzene) compared to less substituted furans and to other fuels has been experimentally observed and is well explained in the model.

Automated work packages architecture: An initial set of human factors and instrumentation and controls requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, Vivek; Oxstrand, Johanna H.; Le Blanc, Katya L.

The work management process in current fleets of national nuclear power plants is so highly dependent on large technical staffs and quality of work instruction, i.e., paper-based, that this puts nuclear energy at somewhat of a long-term economic disadvantage and increase the possibility of human errors. Technologies like mobile portable devices and computer-based procedures can play a key role in improving the plant work management process, thereby increasing productivity and decreasing cost. Automated work packages are a fundamentally an enabling technology for improving worker productivity and human performance in nuclear power plants work activities because virtually every plant work activitymore » is accomplished using some form of a work package. As part of this year’s research effort, automated work packages architecture is identified and an initial set of requirements identified, that are essential and necessary for implementation of automated work packages in nuclear power plants.« less

PlanWorks: A Debugging Environment for Constraint Based Planning Systems

NASA Technical Reports Server (NTRS)

Daley, Patrick; Frank, Jeremy; Iatauro, Michael; McGann, Conor; Taylor, Will

2005-01-01

Numerous planning and scheduling systems employ underlying constraint reasoning systems. Debugging such systems involves the search for errors in model rules, constraint reasoning algorithms, search heuristics, and the problem instance (initial state and goals). In order to effectively find such problems, users must see why each state or action is in a plan by tracking causal chains back to part of the initial problem instance. They must be able to visualize complex relationships among many different entities and distinguish between those entities easily. For example, a variable can be in the scope of several constraints, as well as part of a state or activity in a plan; the activity can arise as a consequence of another activity and a model rule. Finally, they must be able to track each logical inference made during planning. We have developed PlanWorks, a comprehensive system for debugging constraint-based planning and scheduling systems. PlanWorks assumes a strong transaction model of the entire planning process, including adding and removing parts of the constraint network, variable assignment, and constraint propagation. A planner logs all transactions to a relational database that is tailored to support queries for of specialized views to display different forms of data (e.g. constraints, activities, resources, and causal links). PlanWorks was specifically developed for the Extensible Universal Remote Operations Planning Architecture (EUROPA(sub 2)) developed at NASA, but the underlying principles behind PlanWorks make it useful for many constraint-based planning systems. The paper is organized as follows. We first describe some fundamentals of EUROPA(sub 2). We then describe PlanWorks' principal components. We then discuss each component in detail, and then describe inter-component navigation features. We close with a discussion of how PlanWorks is used to find model flaws.

Microgravity

NASA Image and Video Library

1999-05-26

Looking for a faster computer? How about an optical computer that processes data streams simultaneously and works with the speed of light? In space, NASA researchers have formed optical thin-film. By turning these thin-films into very fast optical computer components, scientists could improve computer tasks, such as pattern recognition. Dr. Hossin Abdeldayem, physicist at NASA/Marshall Space Flight Center (MSFC) in Huntsville, Al, is working with lasers as part of an optical system for pattern recognition. These systems can be used for automated fingerprinting, photographic scarning and the development of sophisticated artificial intelligence systems that can learn and evolve. Photo credit: NASA/Marshall Space Flight Center (MSFC)

[Structural and Dipole Structure Peculiarities of Hoogsteen Base Pairs Formed in Complementary Nucleobases according to ab initio Quantum Mechanics Studies].

PubMed

Petrenko, Y M

2015-01-01

Ab initio quantum mechanics studies for the detection of structure and dipole structure peculiarities of Hoogsteen base pairs relative to Watson-Crick base pairs, were performed during our work. These base pairs are formed as a result of complementary interactions. It was revealed, that adenine-thymine Hoogsteen base pair and adenine-thymine Watson-Crick base pairs can be formed depending on initial configuration. Cytosine-guanine Hoogsteen pairs are formed only when cytosine was originally protonated. Both types of Hoogsteen pairs have noticeable difference in the bond distances and angles. These differences appeared in purine as well as in pyrimidine parts of the pairs. Hoogsteen pairs have mostly shorter hydrogen bond lengths and significantly larger angles of hydrogen bonds and larger angles between the hydrogen bonds than Watson-Crick base pairs. Notable differences are also observed with respect to charge distribution and dipole moment. Quantitative data on these differences are shown in our work. It is also reported that the values of local parameters (according to Cambridge classification of the parameters which determine DNA properties) in Hoogsteen base pairs, are greatly different from Watson-Crick ones.

Prediction of thinning of the sheet metal in the program AutoForm and its experimental verification

NASA Astrophysics Data System (ADS)

Fedorko, M.; Urbánek, M.; Rund, M.

2017-02-01

The manufacture of press-formed parts often involves deep-drawing operations. Deep drawing, however, can be deemed an industrial branch in its own right. Today, many experimental as well as numerical methods are available for designing and optimizing deep drawing operations. The best option, however, is to combine both approaches. The present paper describes one such investigation. Here, measurements and numerical simulation were used for mapping the impact of anisotropy on thickness variation in a spherical-shaped drawn part of DC01 steel. Variation in sheet thickness was measured on spherical-shaped drawn parts of various geometries by means of two cameras, and evaluated with digital image correlation using the ARAMIS software from the company GOM. The forming experiment was carried out on an INOVA 200 kN servohydraulic testing machine in which the force vs. piston displacement curve was recorded. The same experiment was then numerically simulated and analyzed using the AUTOFORM software. Various parameters were monitored, such as thinning, strain magnitude, formability, and others. For the purpose of this simulation, a series of mechanical tests was conducted to obtain descriptions of the experimental material of 1.5 mm thickness. A material model was constructed from the tests data involving the work-hardening curve, the impact of anisotropy, and the forming limit diagram. Specifically, these tests included tensile tests, the Nakajima test, and the stacked test, which were carried out to determine materials data for the model. The actual sheet thickness was measured on a sectioned spherical-shaped drawn part using a NIKON optical microscope. The variations in thickness along defined lines on the sectioned drawn part were compared with the numerical simulations data using digital image correlation. The above-described experimental programme is suitable for calibrating a material model for any computational software and can correctly solve deep-drawing problems.

38 CFR Appendix A to Part 41 - Data Collection Form (Form SF-SAC)

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Data Collection Form (Form SF-SAC) A Appendix A to Part 41 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS.... Appendix A to Part 41—Data Collection Form (Form SF-SAC) Note: Data Collection Form SF-SAC and instructions...

Work security in a global economy.

PubMed

Rosskam, Ellen

2003-01-01

Work security is a fundamental right of all working people. After World War II, the welfare state became an intrinsic part of the "Golden Age" of capitalism, in which universal prosperity seemed attainable. Workers' organizations frequently played a crucial role in policy decisions that promoted full employment, income stability, and equitable treatment of workers. Today's world order is quite different. Globalization in its present form is a major obstacle to work security. Globalization is not simply a market-driven phenomenon. It is a political and ideological movement that grants authority to capital over governments and labor. This transfer of authority hinders national efforts to promote work security and may impact the well-being of communities worldwide. In the absence of domestic autonomy, international labor standards are needed to protect social welfare. They should be geared toward curbing unemployment, poverty, and social exclusion in the global economy. The article looks at three initiatives to promote global work security.

A new method for designing dual foil electron beam forming systems. I. Introduction, concept of the method

NASA Astrophysics Data System (ADS)

Adrich, Przemysław

2016-05-01

In Part I of this work existing methods and problems in dual foil electron beam forming system design are presented. On this basis, a new method of designing these systems is introduced. The motivation behind this work is to eliminate the shortcomings of the existing design methods and improve overall efficiency of the dual foil design process. The existing methods are based on approximate analytical models applied in an unrealistically simplified geometry. Designing a dual foil system with these methods is a rather labor intensive task as corrections to account for the effects not included in the analytical models have to be calculated separately and accounted for in an iterative procedure. To eliminate these drawbacks, the new design method is based entirely on Monte Carlo modeling in a realistic geometry and using physics models that include all relevant processes. In our approach, an optimal configuration of the dual foil system is found by means of a systematic, automatized scan of the system performance in function of parameters of the foils. The new method, while being computationally intensive, minimizes the involvement of the designer and considerably shortens the overall design time. The results are of high quality as all the relevant physics and geometry details are naturally accounted for. To demonstrate the feasibility of practical implementation of the new method, specialized software tools were developed and applied to solve a real life design problem, as described in Part II of this work.

Chernobyl Studies Project: Working group 7.0, Environmental transport and health effects. Progress report, March--September 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anspaugh, L.R.; Hendrickson, S.M.

1994-12-01

In April 1988, the US and the former-USSR signed a Memorandum of Cooperation (MOC) for Civilian Nuclear Reactor Safety; this MOC was a direct result of the accident at the Chernobyl Nuclear Power Plant Unit 4 and the following efforts by the two countries to implement a joint program to improve the safety of nuclear power plants and to understand the implications of environmental releases. A Joint Coordinating Committee for Civilian Nuclear Reactor Safety (JCCCNRS) was formed to implement the MOC. The JCCCNRS established many working groups; most of these were the responsibility of the Nuclear Regulatory Commission, as farmore » as the US participation was concerned. The lone exception was Working Group 7 on Environmental Transport and Health Effects, for which the US participation was the responsibility of the US Department of Energy (DOE). The purpose of Working Group 7 was succintly stated to be, ``To develop jointly methods to project rapidly the health effects of any future nuclear reactor accident.`` To implement the work DOE then formed two subworking groups: 7.1 to address Environmental Transport and 7.2 to address Health Effects. Thus, the DOE-funded Chernobyl Studies Project began. The majority of the initial tasks for this project are completed or near completion. The focus is now turned to the issue of health effects from the Chernobyl accident. Currently, we are involved in and making progress on the case-control and co-hort studies of thyroid diseases among Belarussian children. Dosimetric aspects are a fundamental part of these studies. We are currently working to implement similar studies in Ukraine. A major part of the effort of these projects is supporting these studies, both by providing methods and applications of dose reconstruction and by providing support and equipment for the medical teams.« less

Glass Artworks

NASA Technical Reports Server (NTRS)

1988-01-01

Several NASA technologies have played part in growth and cost containment of studio glass art, among them a foam type insulation developed to meet a need for lightweight material that would reduce flame spread in aircraft fire. Foam comes in several forms and is widely used by glass artists, chiefly as an insulator for the various types of ovens used in glass working. Another Spinoff is alumina crucibles to contain molten glass. Before alumina crucibles were used, glass tanks were made of firebrick which tended to erode under high temperatures and cause impurities; this not only improved quality but made the process more cost effective. One more NASA technology that found its way into glass art working is a material known as graphite board, a special form of graphite originally developed for rocket motor applications. This graphite is used to exact compound angles and creates molds for poured glass artworks of dramatic design.

Electrophysiological Repetition Effects in Persons with Mild Cognitive Impairment depend upon Working Memory Demand.

PubMed

Broster, Lucas S; Jenkins, Shonna L; Holmes, Sarah D; Edwards, Matthew G; Jicha, Gregory A; Jiang, Yang

2018-05-07

Forms of implicit memory, including repetition effects, are preserved relative to explicit memory in clinical Alzheimer's disease. Consequently, cognitive interventions for persons with Alzheimer's disease have been developed that leverage this fact. However, despite the clinical robustness of behavioral repetition effects, altered neural mechanisms of repetition effects are studied as biomarkers of both clinical Alzheimer's disease and pre-morbid Alzheimer's changes in the brain. We hypothesized that the clinical preservation of behavioral repetition effects results in part from concurrent operation of discrete memory systems. We developed two experiments that included probes of emotional repetition effects differing in that one included an embedded working memory task. We found that neural repetition effects manifested in patients with amnestic mild cognitive impairment, the earliest form of clinical Alzheimer's disease, during emotional working memory tasks, but they did not manifest during the task that lacked the embedded working memory manipulation. Specifically, the working memory task evoked neural repetition effects in the P600 time-window, but the same neural mechanism was only minimally implicated in the task without a working memory component. We also found that group differences in behavioral repetition effects were smaller in the experiment with a working memory task. We suggest that cross-domain cognitive challenge can expose "defunct" neural capabilities of individuals with amnestic mild cognitive impairment. Copyright © 2018. Published by Elsevier Ltd.

[The representation of madness in William Shakespeare's characters].

PubMed

Stompe, Thomas; Ritter, Kristina; Friedmann, Alexander

2006-08-01

Shakespeare is one of the great creators of human characters of the 16(th) century. Like for many of his contemporaries madness was a central topic of his work. The first part of this paper discusses the sociocultural environment and the semantic field of madness in the Elizabethan age, which forms the background for Shakespeare's characters. In the second part we try to analyze the clinical pictures of the fictive characters of Othello, Hamlet, Lear and Macbeth. While we find melancholy, delusions and hallucinations, other diseases such as schizophrenia are missing entirely. Schizophrenia only appears in the literature more than two hundred years later, in the beginning of modern age.

ON THE DECOMPOSITION OF STRESS AND STRAIN TENSORS INTO SPHERICAL AND DEVIATORIC PARTS

PubMed Central

Augusti, G.; Martin, J. B.; Prager, W.

1969-01-01

It is well known that Hooke's law for a linearly elastic, isotropic solid may be written in the form of two relations that involve only the spherical or only the deviatoric parts of the tensors of stress and strain. The example of the linearly elastic, transversely isotropic solid is used to show that this decomposition is not, in general, feasible for linearly elastic, anisotropic solids. The discussion is extended to a large class of work-hardening rigid, plastic solids, and it is shown that the considered decomposition can only be achieved for the incompressible solids of this class. PMID:16591754

Geology and mining industry of the Tintic district, Utah: Section in Nineteenth Annual Report of the United States Geological Survey to the Secretary of the Interior 1897 - 1898: Part III - Economic Geology

USGS Publications Warehouse

Tower, George Warren; Smith, George Otis

1899-01-01

The field work upon which this report is based was begun in July, 1897, and continued without interruption until December of the same year. The area studied is approximately 15 miles square and contains 234 square miles. The topographic maps, which are two in number, were prepared under the direction of Mr. R. U. Goode, Mr. S. S. Gannett doing the triangulation and Messrs. Marshall and Griswold the topography in the fall of 1896 and summer of 1897. The mapping is done on two scales; the larger area, approximately 15 miles square, is mapped on a scale of 1: 62,500. This map is designed to form a part of the Geologic Atlas of the United States. The other map represents the portion of the larger area in which the majority of the mines are located. It is on a scale of 1: 9,600, and covers an area of 12 square miles. The work has been greatly facilitated through the assistance rendered by the mining men of the district, among whom special thanks are due to Messrs. G. H. Robinson, W. J. Craig, W. M. Nesbit, and C. H. Blanchard. The chemical work on the ores and country rocks from the district has been done in the laboratory of the Survey by Messrs. H. N. Stokes and George Steiger, and the determination of the fossils collected is to be credited to Mr. G. H. Girty, also of the Geological Survey. In the field work the authors have cooperated constantly on every phase of the varied problems. The same is true for the office work, except that the stratigraphic and economic problems have been the especial studies of Mr. Tower, while the petrologic and remaining problems have been the special studies of Mr. Smith. In pursuance of this system of work the introduction has been written conjointly, Chapter II of Part I and all of Part II have been written by Mr. Tower, and Chapters I and III to VII of Part I by Mr. Smith.

[Hospital at home care for children with leukaemia].

PubMed

Justin, Manuela

2015-01-01

The care pathway of a child with leukaemia is long and often difficult. The different professionals work together to ensure optimal care management. Hospital at home forms part of this pathway in partnership with the inhospital departments, the general practitioner and the day hospital. This link between the different professionals is assured by the hospital at home child health nurse coordinator. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene

Treesearch

Alex Wiedenhoeft

2006-01-01

Wood can be found at crime scenes in many forms: as a murder weapon, as material used to hide a body, or as trace evidence from forced entry or vandalism. In the course of my work at the Forest Products Laboratory, Center for Wood Anatomy Research, I have been part of several forensic investigations that were adversely affected by inappropriate procedures used to...

Management of processes of electrochemical dimensional processing

NASA Astrophysics Data System (ADS)

Akhmetov, I. D.; Zakirova, A. R.; Sadykov, Z. B.

2017-09-01

In different industries a lot high-precision parts are produced from hard-processed scarce materials. Forming such details can only be acting during non-contact processing, or a minimum of effort, and doable by the use, for example, of electro-chemical processing. At the present stage of development of metal working processes are important management issues electrochemical machining and its automation. This article provides some indicators and factors of electrochemical machining process.

Heating and Cooling. A Resource Unit for Teachers. Learning in Science Project. Working Paper No. 38.

ERIC Educational Resources Information Center

Schollum, Brendan; And Others

The major focus of this unit is on changes where substances do not, from the scientific viewpoint, actually change into other substances. For example, substances may expand or contract upon heating or change form (such as ice to water). Part 1 provides a 12-item instrument to enable teachers to check their own ideas about this topic and to clarify…

Tri Community Watershed Initiative: Towns of Black Diamond, Turner Valley and Okotoks, Alberta, Canada Promoting Sustainable Behaviour in Watersheds and Communities

Treesearch

Maureen Lynch

2006-01-01

For the past two years, three rural municipalities in the foothills of the Canadian Rockies have been working together to promote sustainability in their communities. The towns share the belief that water is an integral part of the community; they have formed a Tri Community Watershed Initiative to help manage their shared resource. Activities of the Initiative include...

Evolution of a detailed physiological model to simulate the gastrointestinal transit and absorption process in humans, part II: extension to describe performance of solid dosage forms.

PubMed

Thelen, Kirstin; Coboeken, Katrin; Willmann, Stefan; Dressman, Jennifer B; Lippert, Jörg

2012-03-01

The physiological absorption model presented in part I of this work is now extended to account for dosage-form-dependent gastrointestinal (GI) transit as well as disintegration and dissolution processes of various immediate-release and modified-release dosage forms. Empirical functions of the Weibull type were fitted to experimental in vitro dissolution profiles of solid dosage forms for eight test compounds (aciclovir, caffeine, cimetidine, diclofenac, furosemide, paracetamol, phenobarbital, and theophylline). The Weibull functions were then implemented into the model to predict mean plasma concentration-time profiles of the various dosage forms. On the basis of these dissolution functions, pharmacokinetics (PK) of six model drugs was predicted well. In the case of diclofenac, deviations between predicted and observed plasma concentrations were attributable to the large variability in gastric emptying time of the enteric-coated tablets. Likewise, oral PK of furosemide was found to be predominantly governed by the gastric emptying patterns. It is concluded that the revised model for GI transit and absorption was successfully integrated with dissolution functions of the Weibull type, enabling prediction of in vivo PK profiles from in vitro dissolution data. It facilitates a comparative analysis of the parameters contributing to oral drug absorption and is thus a powerful tool for formulation design. Copyright © 2011 Wiley Periodicals, Inc.

Women and men coal miners: coping with gender integration underground

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yount, K.R.

The central purpose of this research is to initiate a theoretical understanding of the integration of women into traditionally-male, physical-labor jobs. The primary sources of data consist of in depth interviews with women and men underground coal miners and company personnel, and field notes collected during participant observation work in mining communities. Part I addresses the relationship between conditions of production and modes of interaction in underground mines. Personality traits conceived as aspects of masculinity are traced to efforts to cope with the stressors of engaging in physical labor in a work setting characterized by lack of work autonomy, amore » high degree of threat, and a high degree of interdependence for task accomplishment. Part II focuses on situational and individual factors affecting the integration of women in the workplace. Although most women miners are satisfied with their work, a gender based division of labor has arisen in which women are concentrated in low-prestige laborer positions. The processes involved in undermining a woman's work reputation and self-concept are summarized and forms of discrimination that recreate aspects of the female sterotype and lead to the development of sex segregation in the workplace are to the development of sex segregation in the workplace are discussed.« less

Centrifugal forming and mechanical properties of silicone-based elastomers for soft robotic actuators

NASA Astrophysics Data System (ADS)

Kulkarni, Parth

This thesis describes the centrifugal forming and resulting mechanical properties of silicone-based elastomers for the manufacture of soft robotic actuators. This process is effective at removing bubbles that get entrapped within 3D-printed, enclosed molds. Conventional methods for rapid prototyping of soft robotic actuators to remove entrapped bubbles typically involve degassing under vacuum, with open-faced molds that limit the layout of formed parts to raised 2D geometries. As the functionality and complexity of soft robots increase, there is a need to mold complete 3D structures with controlled thicknesses or curvatures on multiples surfaces. In addition, characterization of the mechanical properties of common elastomers for these soft robots has lagged the development of new designs. As such, relationships between resulting material properties and processing parameters are virtually non-existent. One of the goals of this thesis is to provide guidelines and physical insights to relate the design, processing conditions, and resulting properties of soft robotic components to each other. Centrifugal forming with accelerations on the order of 100 g's is capable of forming bubble-free, true 3D components for soft robotic actuators, and resulting demonstrations in this work include an aquatic locomotor, soft gripper, and an actuator that straightens when pressurized. Finally, this work shows that the measured mechanical properties of 3D geometries fabricated within enclosed molds through centrifugal forming possess comparable mechanical properties to vacuumed materials formed from open-faced molds with raised 2D features.

La Isla de Gorgona, Colombia: A petrological enigma?

NASA Astrophysics Data System (ADS)

Kerr, Andrew C.

2005-09-01

A wide range of intrusive (wehrlite, dunite, gabbro and olivine gabbro) and extrusive (komatiites picrites and basalts) igneous rocks are found on the small pacific island of Gorgona. The island is best known for its ˜90 Ma spinifex-textured komatiites: the only true Phanerozoic komatiites yet discovered. Early work led to suggestions that the rocks of the island formed at a mid-ocean ridge, however more recent research supports an origin as part of a hot mantle plume-derived oceanic plateau. One of the main lines of evidence for this origin stems from the inferred high mantle source temperatures required to form the high-MgO (> 15 wt.%) komatiites and picrites. Another remarkable feature of the island, considering its small size (8 × 2.5 km), is the degree of chemical and radiogenic isotopic heterogeneity shown by the rocks. This heterogeneity requires a mantle source region with at least three isotopically distinctive source regions (two depleted and one enriched). Although these mantle source regions appear to be derived in significant part from recycled oceanic crust and lithosphere, enrichments in 187Os, 186Os and 3He in Gorgona lavas and intrusive rocks, suggest some degree of transfer of material from the outer core to the plume source region at D″. Modelling reveals that the komatiites probably formed by dynamic melting at an average pressure of 3-4 GPa leaving residual harzburgite. Trace element depletion in Gorgona ultramafic rocks appears to be the result of earlier, deeper melting which produced high-MgO trace element-enriched magmas. The discovery of a trace-element enriched picrite on the island has confirmed this model. Gorgona accreted onto the palaeocontinental margin of northwestern South America in the Eocene and palaeomagnetic work reveals that it was formed at ˜26 °S. It has been proposed that Gorgona is a part of the Caribbean-Colombian Oceanic Plateau (CCOP), however, the CCOP accreted in the Late Cretaceous and was derived from a more equatorial palaeolatitude. This evidence, and differing geochemical signatures, strongly suggests that Gorgona and probably other coastal oceanic plateau sequences in Colombia and Ecuador, belong to a completely different oceanic plateau to the CCOP.

'I have the world's best job' - staff experience of the advantages of caring for older people.

PubMed

Eldh, Ann Catrine; van der Zijpp, Teatske; McMullan, Christel; McCormack, Brendan; Seers, Kate; Rycroft-Malone, Jo

2016-06-01

Besides a growing demand for safe high-quality care for older people, long-term care (LTC) often struggles to recruit appropriately qualified nursing staff. Understanding what LTC staff value in their work may contribute to a more comprehensive understanding of what can attract staff and support person-centred care. To explore staff experience of the advantages of working in LTC settings for older people. Narrative descriptions of 85 LTC staff in Ireland, the Netherlands and Sweden on what they value in their work were analysed with qualitative content analysis. Ethical approval was obtained according to the requirements of each country, and participants provided informed consent prior to the individual interviews. Working in LTC signifies bonding with the older people residing there, their next of kin and the team members. It means autonomy in one's daily tasks amalgamated with being a part of an affirmative team. Participants reported a sense of accomplishment and fulfilment; caring meant consideration and recognition of the older people and the relationships formed, which provided for professional and personal growth. The sharing of compassion between staff and residents indicated reciprocity of the relationship with residents. The findings may be transferable to LTC in general although they address only the positive aspects of caring for older people and only the experiences of those staff who had consented to take part in the study. The findings add to what underpins the quality of care in nursing homes: compassion in the nurse-resident relationship and person-centred care in LTC. They indicate reciprocity in the relations formed that may contribute to the empowerment of older people, but further studies are needed to explore this in more detail. © 2015 Nordic College of Caring Science.

Investigation the effect of lattice angle on the band gap width in 3D phononic crystals with rhombohedral(I) lattice

NASA Astrophysics Data System (ADS)

Salehi, H.; Aryadoust, M.; Shoushtari, M. Zargar

2014-07-01

In this paper, the propagation of acoustic waves in the phononic crystal of 3D with rhombohedral(I) lattice is studied theoretically. The crystal composite constituted of nickel spheres embedded in epoxy. The calculations of the band structure and density of states are performed with the plane wave expansion method in the irreducible part of Brillouin zone. In the present work, we have investigated the effect of lattice angle on the band structure and width of the band gap rhombohedral(I) lattice in the irreducible part of the first Brillouin zone and its planes separately. The results show that more than one complete band gape are formed in the four planes of the irreducible part. The most complete band gaps are formed in the (111) plane and the widest complete band gap in (443) with an angle greater than 80. So, if the sound passes through the (111) and (443) planes for the lattice angle close to 90, the crystal phononic displays the excellent insulation behavior. Moreover, in the other planes, the lattice angle does not affect on the width and the number of band gaps. Also, for the filling fraction 5 %, the widest complete band gap is formed. These results are consistent with the effect of symmetry on the band gap width, because the (111) plane has the most symmetry.

Nonlinear Shaping Architecture Designed with Using Evolutionary Structural Optimization Tools

NASA Astrophysics Data System (ADS)

Januszkiewicz, Krystyna; Banachowicz, Marta

2017-10-01

The paper explores the possibilities of using Structural Optimization Tools (ESO) digital tools in an integrated structural and architectural design in response to the current needs geared towards sustainability, combining ecological and economic efficiency. The first part of the paper defines the Evolutionary Structural Optimization tools, which were developed specifically for engineering purposes using finite element analysis as a framework. The development of ESO has led to several incarnations, which are all briefly discussed (Additive ESO, Bi-directional ESO, Extended ESO). The second part presents result of using these tools in structural and architectural design. Actual building projects which involve optimization as a part of the original design process will be presented (Crematorium in Kakamigahara Gifu, Japan, 2006 SANAA“s Learning Centre, EPFL in Lausanne, Switzerland 2008 among others). The conclusion emphasizes that the structural engineering and architectural design mean directing attention to the solutions which are used by Nature, designing works optimally shaped and forming their own environments. Architectural forms never constitute the optimum shape derived through a form-finding process driven only by structural optimization, but rather embody and integrate a multitude of parameters. It might be assumed that there is a similarity between these processes in nature and the presented design methods. Contemporary digital methods make the simulation of such processes possible, and thus enable us to refer back to the empirical methods of previous generations.

K-Basin gel formation studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, M.A.

1998-07-23

A key part of the proposed waste treatment for K Basin sludge is the elimination of reactive uranium metal by dissolution in nitric acid (Fkirnent, 1998). It has been found (Delegard, 1998a) that upon nitric acid dissolution of the sludge, a gel sometimes forms. Gels are known to sometimes impair solid/liquid separation and/or material transfer. The purpose of the work reported here is to determine the cause(s) of the gel formation and to determine operating parameters for the sludge dissolution that avoid formation of gel. This work and related work were planned in (Fkunent, 1998), (Jewett, 1998) and (Beck, 1998a).more » This report describes the results of the tests in (Beck, 1998a) with non-radioactive surrogates.« less

A Case Study of Coordination in Distributed Agile Software Development

NASA Astrophysics Data System (ADS)

Hole, Steinar; Moe, Nils Brede

Global Software Development (GSD) has gained significant popularity as an emerging paradigm. Companies also show interest in applying agile approaches in distributed development to combine the advantages of both approaches. However, in their most radical forms, agile and GSD can be placed in each end of a plan-based/agile spectrum because of how work is coordinated. We describe how three GSD projects applying agile methods coordinate their work. We found that trust is needed to reduce the need of standardization and direct supervision when coordinating work in a GSD project, and that electronic chatting supports mutual adjustment. Further, co-location and modularization mitigates communication problems, enables agility in at least part of a GSD project, and renders the implementation of Scrum of Scrums possible.

Supercritical fluid technologies: an innovative approach for manipulating the solid-state of pharmaceuticals.

PubMed

Pasquali, Irene; Bettini, Ruggero; Giordano, Ferdinando

2008-02-14

Solid-state, crystallographic purity and careful monitoring of the polymorphism of drugs and excipients are currently an integral part of the development of modern drug delivery systems. The reproducible preparation of organic crystals in a specific form and size is a major issue that must be addressed. A recent approach for obtaining pharmaceutical materials in pure physical form is represented by the technologies based on supercritical fluids. The present work aims to provide a critical review of the recent advances in the use of supercritical fluids for the preparation and control of the specific physical form of pharmaceutical substances with particular attention to those fluids used for drug delivery systems. These innovative technologies are highly promising for future application in particle design and engineering.

The relationships among part-time work, work-family interference, and well-being.

PubMed

van Rijswijk, Karen; Bekker, Marrie H J; Rutte, Christel G; Croon, Marcel A

2004-10-01

The authors investigated the effect of part-time work on work-family interference and well-being among 160 part-time and 29 full-time employed mothers (with a partner) working at 2 insurance companies in the Netherlands. The authors controlled for working part time as a strategy for reducing work-family imbalance and found that part-time work was associated with a lower level of work-to-family interference. Also, high levels of work-family interference were associated with diminished well-being. Work-to-family interference played a mediating role in the relationship between part-time work and well-being. Results indicate that part-time jobs can enhance the work-family balance not only for those explicitly choosing part-time employment as a means to reduce work-family imbalance but also for other employees.

Gendered bodies: recruitment, management and occupational health in northern Thailand's electronics factories.

PubMed

Theobald, Sally

2002-01-01

This paper explores workers' experiences and understandings of occupational health hazards in the electronics industries of northern Thailand. Women form the bulk of the lower-level workforce as operators responsible for assembling the parts that make up microchip components. Drawing data from 16 months of research in workers' dormitories, formal and informal interviews and questionnaire surveys, in this paper I explore how gender relations are central to the organization and experience of work in these industries. I identify "work process" health hazards resulting from the physical working environment, and "workplace" health hazards relating to the organizational and social pressures of the working environment. Musculoskeletal pain, eye strain, chemical exposure, stress, improper use of safety equipment and accidents all impact upon women workers' health. Additionally, risk behaviors such as amphetamine and alcohol use, and unprotected sex, are associated with the social context of factory work.

EMAS recommendations for conditions in the workplace for menopausal women.

PubMed

Griffiths, Amanda; Ceausu, Iuliana; Depypere, Herman; Lambrinoudaki, Irene; Mueck, Alfred; Pérez-López, Faustino R; van der Schouw, Yvonne T; Senturk, Levent M; Simoncini, Tommaso; Stevenson, John C; Stute, Petra; Rees, Margaret

2016-03-01

Women form a large part of many workforces throughout Europe. Many will be working throughout their menopausal years. Whilst the menopause may cause no significant problems for some, for others it is known to present considerable difficulties in both their personal and working lives. During the menopausal transition women report that fatigue and difficulties with memory and concentration can have a negative impact on their working lives. Furthermore, hot flushes can be a source of embarrassment and distress. Some consider that these symptoms can impact on their performance. Greater awareness among employers, together with sensitive and flexible management can be helpful for women at this time. Particular strategies might include: fostering a culture whereby employees feel comfortable disclosing health problems, allowing flexible working, reducing sources of work-related stress, providing easy access to cold drinking water and toilets, and reviewing workplace temperature and ventilation. Copyright © 2016. Published by Elsevier Ireland Ltd.

Pacific Fleet Regional Inventory Stocking Model (PRISM)

DTIC Science & Technology

2003-06-01

Fleet Inventory Management Form ..........................................................................99 19. Master Parts List Input Form...100 20. Master Parts List Update Form...107 26. Master Parts List by APL Report..............................................................................109 27. Master

Pediatricians Working Part-Time Has Plateaued.

PubMed

Cull, William L; Frintner, Mary Pat; O'Connor, Karen G; Olson, Lynn M

2016-04-01

To examine trends in pediatricians working part-time and residents seeking part-time work and to examine associated characteristics. The American Academy of Pediatrics (AAP) Periodic Survey of Fellows and the AAP Annual Survey of Graduating Residents were used to examine part-time employment. Fourteen periodic surveys were combined with an overall response rate of 57%. Part-time percentages were compared for surveys conducted from 2006-2009 and 2010-2013. The AAP Annual Surveys of Graduating Residents (combined response rate = 60%) from 2006-2009 were compared with 2010-2013 surveys for residents seeking and obtaining part-time positions following training. Multivariable logistic regression models identified characteristics associated with part-time work. Comparable percentages of pediatricians worked part-time in 2006-2009 (23%) and 2010-2013 (23%). There was similarly no statistically significant difference in residents seeking part-time work (30%-28%), and there was a slight decline in residents accepting part-time work (16%-13%, aOR .75, 95% CI .56-.96). Increases in working part-time were not found for any subgroups examined. Women consistently were more likely than men to work part-time (35% vs 9%), but they showed different patterns of part-time work across age. Women in their 40s (40%) were more likely than other women (33%) and men in their 60s (20%) were more likely than other men (5%) to work part-time. There has been a levelling off in the number of pediatricians working part-time and residents seeking part-time work. Overall, women remain more likely to work part-time, although 1 in 5 men over 60 work part-time. Copyright © 2016 Elsevier Inc. All rights reserved.

An optical technique to measure distortion in heat-treated parts in-situ

NASA Astrophysics Data System (ADS)

Sciammarella, Federico; Nash, Phillip

2005-05-01

Improvements in the properties of aluminum alloys have made them more popular for structural applications. Using the different heat treatments that are available, aluminum alloys can have a wide variation in properties for different types of applications. The appropriate heat treatments of these alloys are vital in providing the properties needed for their particular applications. Moreover, understanding the effects of heat treatments that may cause distortion to a part is critical. Most of the work carried out in this field is in the form of pre- and post-treatment analysis of a part. In this study, in-situ measurements of the distortions that a heat-treated part undergoes when subjected to rapid heating to temperatures near melting followed by slow cooling were carried out. A numerical model was built to simulate the experiment and the results are compared. This study will provide much-needed insight into the complex occurrences that aluminum parts undergo during heat treatment.

Visualization of anthropometric measures of workers in computer 3D modeling of work place.

PubMed

Mijović, B; Ujević, D; Baksa, S

2001-12-01

In this work, 3D visualization of a work place by means of a computer-made 3D-machine model and computer animation of a worker have been performed. By visualization of 3D characters in inverse kinematic and dynamic relation with the operating part of a machine, the biomechanic characteristics of worker's body have been determined. The dimensions of a machine have been determined by an inspection of technical documentation as well as by direct measurements and recordings of the machine by camera. On the basis of measured body height of workers all relevant anthropometric measures have been determined by a computer program developed by the authors. By knowing the anthropometric measures, the vision fields and the scope zones while forming work places, exact postures of workers while performing technological procedures were determined. The minimal and maximal rotation angles and the translation of upper and lower arm which are basis for the analysis of worker burdening were analyzed. The dimensions of the seized space of a body are obtained by computer anthropometric analysis of movement, e.g. range of arms, position of legs, head, back. The influence of forming of a work place on correct postures of workers during work has been reconsidered and thus the consumption of energy and fatigue can be reduced to a minimum.

46 CFR Form Fmc-132a to Subpart A... - Form FMC-132A to Subpart A of Part 540

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 9 2013-10-01 2013-10-01 false Form FMC-132A to Subpart A of Part 540 FMC Form FMC-132A... Pt. 540, Subpt. A, Form FMC-132A Form FMC-132A to Subpart A of Part 540 FORM FMC-132A FEDERAL... furnish written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered...

46 CFR Form Fmc-132a to Subpart A... - Form FMC-132A to Subpart A of Part 540

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 9 2012-10-01 2012-10-01 false Form FMC-132A to Subpart A of Part 540 FMC Form FMC-132A... Pt. 540, Subpt. A, Form FMC-132A Form FMC-132A to Subpart A of Part 540 Form FMC-132A FEDERAL... furnish written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered...

46 CFR Form Fmc-132a to Subpart A... - Form FMC-132A to Subpart A of Part 540

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 9 2014-10-01 2014-10-01 false Form FMC-132A to Subpart A of Part 540 FMC Form FMC-132A... Pt. 540, Subpt. A, Form FMC-132A Form FMC-132A to Subpart A of Part 540 FORM FMC-132A FEDERAL... furnish written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered...

46 CFR Form Fmc-132a to Subpart A... - Form FMC-132A to Subpart A of Part 540

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 9 2011-10-01 2011-10-01 false Form FMC-132A to Subpart A of Part 540 FMC Form FMC-132A... Pt. 540, Subpt. A, Form FMC-132A Form FMC-132A to Subpart A of Part 540 Form FMC-132A FEDERAL... furnish written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered...

[Pre-labor maternity leave for working women in physically demanding occupations].

PubMed

Orly, Tivon-Fisher; Ido, Sot; Menahem, Fisher

2015-07-01

Pregnant women, when employed in physically demanding occupations, may encounter difficulties in carrying out their work throughout pregnancy. Many such "blue collar" workers are unable to proceed in strenuous work during advanced stages of pregnancy. However, scientific evidence is not sufficient to support the widely accepted assumption of health risks due to the hard work during pregnancy. Therefore, in Israel, as long as pregnancy is normal, and the good health of both the mother and fetus is maintained, such workers are not entitled to sick leave or any other form of compensation. Nevertheless, many agree that strenuous work is not suitable for pregnant women, as a medical survey partly demonstrates. Identification of this problem and review of relevant literature led to the formation of a committee by the Israeli National Council for Women's Health. We hereby summarize relevant literature, describe the committee's work and elaborate its recommendations, mainly to consider and establish a unique compensated pre-birth leave for pregnant women whose work is physically strenuous.

Systems and methods for producing low work function electrodes

DOEpatents

Kippelen, Bernard; Fuentes-Hernandez, Canek; Zhou, Yinhua; Kahn, Antoine; Meyer, Jens; Shim, Jae Won; Marder, Seth R.

2015-07-07

According to an exemplary embodiment of the invention, systems and methods are provided for producing low work function electrodes. According to an exemplary embodiment, a method is provided for reducing a work function of an electrode. The method includes applying, to at least a portion of the electrode, a solution comprising a Lewis basic oligomer or polymer; and based at least in part on applying the solution, forming an ultra-thin layer on a surface of the electrode, wherein the ultra-thin layer reduces the work function associated with the electrode by greater than 0.5 eV. According to another exemplary embodiment of the invention, a device is provided. The device includes a semiconductor; at least one electrode disposed adjacent to the semiconductor and configured to transport electrons in or out of the semiconductor.

12 CFR Appendix C to Part 202 - Sample Notification Forms

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Sample Notification Forms C Appendix C to Part... CREDIT OPPORTUNITY ACT (REGULATION B) Pt. 202, App. C Appendix C to Part 202—Sample Notification Forms 1. This appendix contains ten sample notification forms. Forms C-1 through C-4 are intended for use in...

12 CFR Appendix C to Part 202 - Sample Notification Forms

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Sample Notification Forms C Appendix C to Part... CREDIT OPPORTUNITY ACT (REGULATION B) Pt. 202, App. C Appendix C to Part 202—Sample Notification Forms 1. This appendix contains ten sample notification forms. Forms C-1 through C-4 are intended for use in...

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2014 CFR

2014-01-01

...=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A, Lines 2, 3, and 4 of RUS Form 7. Area...

16 CFR Appendix C to Part 698 - Model Forms for Affiliate Marketing Opt-Out Notices

Code of Federal Regulations, 2012 CFR

2012-01-01

... Notices C Appendix C to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. C Appendix C to Part 698—Model Forms for Affiliate... of opt-outs by joint consumers to comply with § 680.23(a)(2) of part 680. C-1 Model Form for Initial...

16 CFR Appendix C to Part 698 - Model Forms for Affiliate Marketing Opt-Out Notices

Code of Federal Regulations, 2014 CFR

2014-01-01

... Notices C Appendix C to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. C Appendix C to Part 698—Model Forms for Affiliate... of opt-outs by joint consumers to comply with § 680.23(a)(2) of part 680. C-1 Model Form for Initial...

16 CFR Appendix C to Part 698 - Model Forms for Affiliate Marketing Opt-Out Notices

Code of Federal Regulations, 2013 CFR

2013-01-01

... Notices C Appendix C to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. C Appendix C to Part 698—Model Forms for Affiliate... of opt-outs by joint consumers to comply with § 680.23(a)(2) of part 680. C-1 Model Form for Initial...

Best practice in the management of clinical coding services: Insights from a project in the Republic of Ireland, Part 2.

PubMed

Reid, Beth A; Ridoutt, Lee; O'Connor, Paul; Murphy, Deirdre

2017-09-01

This is the second of two articles about best practice in the management of coding services. The best practice project was part of a year-long project conducted in the Republic of Ireland to review the quality of the Hospital Inpatient Enquiry data for its use in activity-based funding. The four methods used to address the best practice aspect of the project were described in detail in Part 1. The results included in this article are those relating to the coding manager's background, preparation and style, clinical coder (CC) workforce adequacy, the CC workforce structure and career pathway, and the physical and psychological work environment for the clinical coding service. Examples of best practice were found in the study hospitals but there were also areas for improvement. Coding managers would benefit from greater support in the form of increased opportunities for management training and a better method for calculating CC workforce numbers. A career pathway is needed for CCs to progress from entry to expert CC, mentor, manager and quality controller. Most hospitals could benefit from investment in infrastructure that places CCs in a physical environment that tells them they are an important part of the hospital and their work is valued.

[Refusal of care by a HIV-positive adolescent: role of the cross-cultural approach].

PubMed

Bouaziz, Nora; Titia Rizzi, Alice

The refusal of treatment is frequent in human immunodeficiency virus-positive adolescents. The clinical history of a teenage girl presenting severe immunodepression secondary to the virus, a depressive disorder and a refusal of treatment, illustrates the benefit of combined paediatric, child psychiatric and cross-cultural care as proposed by the Cochin-Paris Adolescent Centre. Working on the meaning of the refusal was a prerequisite for the construction of a care project forming part of a life project, as the psychopathological work could only begin once somatic care ensuring the patient's protection was in place. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Why are some medical specialists working part-time, while others work full-time?

PubMed

de Jong, Judith D; Heiligers, Phil; Groenewegen, Peter P; Hingstman, Lammert

2006-10-01

Although medical specialists primarily work full-time, part-time work is on the increase, a trend that can be found worldwide. This article seeks to answer the question why some medical specialists work part-time, while others do not although they are willing to work part-time. Two approaches are used. First, we studied reported reasons and as a second approach we used a theoretical model, based on goal-directed behavior and restrictions. A questionnaire was sent to all internists (N=817), surgeons (N=693) and radiologists (N=621) working in general hospitals in The Netherlands. Questions were asked about personal traits, characteristics of the work situation, and motives for working full-time or part-time. Frequencies were reported for the reasons given, and multilevel analysis was used to test the theoretical model. The results show that the reported reasons for working part-time and being willing to work part-time are the same: the importance of family and leisure pursuits. The second approach showed that medical specialists working part-time tend to be female, older, and have children below the age of five. Surgeons are least likely to work part-time. A willingness to work part-time is purely individual and not related to any of the explanatory variables. We conclude that working part-time is related to both professional and personal circumstances. Policy should be aimed at removing the organizational difficulties that obstruct the realization of part-time work. Alternatively, perhaps there should be a change in working hours for all medical specialists. As the majority of all full-time working medical specialists are willing to work part-time, this might indicate that most medical specialists actually prefer "normal" working hours.

Assessment of the mechanical performance of titanium cranial prostheses manufactured by super plastic forming and single point incremental forming

NASA Astrophysics Data System (ADS)

Sgambitterra, Emanuele; Piccininni, Antonio; Guglielmi, Pasquale; Ambrogio, Giuseppina; Fragomeni, Gionata; Villa, Tomaso; Palumbo, Gianfranco

2018-05-01

Cranial implants are custom prostheses characterized by quite high geometrical complexity and small thickness; at the same time aesthetic and mechanical requirements have to be met. Titanium alloys are largely adopted for such prostheses, as they can be processed via different manufacturing technologies. In the present work cranial prostheses have been manufactured by Super Plastic Forming (SPF) and Single Point Incremental Forming (SPIF). In order to assess the mechanical performance of the cranial prostheses, drop tests under different load conditions were conducted on flat samples to investigate the effect of the blank thickness. Numerical simulations were also run for comparison purposes. The mechanical performance of the cranial implants manufactured by SPF and SPIF could be predicted using drop test data and information about the thickness evolution of the formed parts: the SPIFed prosthesis revealed to have a lower maximum deflection and a higher maximum force, while the SPFed prostheses showed a lower absorbed energy.

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 9 2012-10-01 2012-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 9 2013-10-01 2013-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 9 2011-10-01 2011-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

46 CFR Form Fmc-132b to Subpart B... - Form FMC-132B to Subpart B of Part 540

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 9 2014-10-01 2014-10-01 false Form FMC-132B to Subpart B of Part 540 FMC Form FMC-132B... Persons on Voyages Pt. 540, Subpt. B, Form FMC-132B Form FMC-132B to Subpart B of Part 540 Form FMC-132B... written notice to the Federal Maritime Commission forthwith of all suits filed, judgments rendered, and...

Thermo-hydroforming of a fiber-reinforced thermoplastic composites considering fiber orientations

NASA Astrophysics Data System (ADS)

Ahn, Hyunchul; Kuuttila, Nicholas Eric; Pourboghrat, Farhang

2018-05-01

The Thermoplastic woven composites were formed using a composite thermal hydroforming process, utilizing heated and pressurized fluid, similar to sheet metal forming. This study focuses on the modification of 300-ton pressure formation and predicts its behavior. Spectra Shield SR-3136 is used in this study and material properties are measured by experiments. The behavior of fiber-reinforced thermoplastic polymer composites (FRTP) was modeled using the Preferred Fiber Orientation (PFO) model and validated by comparing numerical analysis with experimental results. The thermo-hydroforming process has shown good results in the ability to form deep drawn parts with reduced wrinkles. Numerical analysis was performed using the PFO model and implemented as commercial finite element software ABAQUS / Explicit. The user subroutine (VUMAT) was used for the material properties of the thermoplastic composite layer. This model is suitable for working with multiple layers of composite laminates. Model parameters have been updated to work with cohesive zone model to calculate the interfacial properties between each composite layer. The results of the numerical modeling showed a good correlation with the molding experiment on the forming shape. Numerical results were also compared with experimental results on punch force-displacement curves for deformed geometry and forming processes of the composite layer. Overall, the shape of the deformed FRTP, including the distribution of wrinkles, was accurately predicted as shown in this study.

[Gazing into the depths of the soul: hypnotism in documentary and instructional film (1920-1936)].

PubMed

Ledebur, Sophie

2014-12-01

Although part of the medical fold since the 1870s, hypnosis was long relegated to the margins, recognised and used by only a relatively small group of medical professionals. In the decades around 1900 hypnotic techniques were monopolised as a form of medical treatment through a long and in no way linear process. Hypnosis of laymen was vehemently opposed, however, denounced as being far too dangerous. And yet, medical participation in the aura of spectacular intervention into the human psyche garnered support. The medium of both documentary and instructional film served an important function in this regard, conveying popular interest in acknowledging hypnosis as a scientific method. On the basis of four medically accredited films on hypnosis from 1920 to 1936, this paper attempts to investigate how medical experts and these genres, as part of their effort to claim hypnosis from the realm of public spectacle and parapsychological experimentation, worked to stabilise hypnosis as a purified form of medical and psychiatric practice.

Hydrogen bonds and heat diffusion in α-helices: a computational study.

PubMed

Miño, German; Barriga, Raul; Gutierrez, Gonzalo

2014-08-28

Recent evidence has shown a correlation between the heat diffusion pathways and the known allosteric communication pathways in proteins. Allosteric communication in proteins is a central, yet unsolved, problem in biochemistry, and the study and characterization of the structural determinants that mediate energy transfer among different parts of proteins is of major importance. In this work, we characterized the role of hydrogen bonds in diffusivity of thermal energy for two sets of α-helices with different abilities to form hydrogen bonds. These hydrogen bonds can be a constitutive part of the α-helices or can arise from the lateral chains. In our in vacuo simulations, it was observed that α-helices with a higher possibility of forming hydrogen bonds also had higher rates of thermalization. Our simulations also revealed that heat readily flowed through atoms involved in hydrogen bonds. As a general conclusion, according to our simulations, hydrogen bonds fulfilled an important role in heat diffusion in structural patters of proteins.

Cosmological Models and Stability

NASA Astrophysics Data System (ADS)

Andersson, Lars

Principles in the form of heuristic guidelines or generally accepted dogma play an important role in the development of physical theories. In particular, philosophical considerations and principles figure prominently in the work of Albert Einstein. As mentioned in the talk by Jiří Bičák at this conference, Einstein formulated the equivalence principle, an essential step on the road to general relativity, during his time in Prague 1911-1912. In this talk, I would like to discuss some aspects of cosmological models. As cosmology is an area of physics where "principles" such as the "cosmological principle" or the "Copernican principle" play a prominent role in motivating the class of models which form part of the current standard model, I will start by comparing the role of the equivalence principle to that of the principles used in cosmology. I will then briefly describe the standard model of cosmology to give a perspective on some mathematical problems and conjectures on cosmological models, which are discussed in the later part of this paper.

Friction Spinning—New Innovative Tool Systems For The Production of Complex Functionally Graded Workpieces

NASA Astrophysics Data System (ADS)

Homberg, Werner; Hornjak, Daniel

2011-05-01

Friction spinning is a new innovative and promising incremental forming technology implying high potential regarding the manufacturing of complex functionally graded workpieces and enhancing existing forming limits of conventional metal spinning processes. The friction spinning process is based on the integration of thermo-mechanical friction subprocesses in this incremental forming process. By choosing the appropriate process parameters, e.g. axial feed rate or relative motion, the contact conditions between tool and workpiece can be influenced in a defined way and, thus, a required temperature profile can be obtained. Friction spinning allows the extension of forming limits compared to conventional metal spinning in order to produce multifunctional components with locally varying properties and the manufacturing of e.g. complex hollow parts made of tubes, profiles, or sheet metals. In this way, it meets the demands regarding efficiency and the manufacturing of functionally graded lightweight components. There is e.g. the possibility of locally increasing the wall thickness in joining zones and, as a consequence, achieving higher quality of the joint at decreased expense. These products are not or only hardly producible by conventional processes so far. In order to benefit from the advantages and potentials of this new innovative process new tooling systems and concepts are indispensable which fulfill the special requirements of this thermo-mechanical process concerning thermal and tribological loads and which allow simultaneous and defined forming and friction operations. An important goal of the corresponding research work at the Chair of Forming and Machining Technology at the University of Paderborn is the development of tool systems that allow the manufacturing of such complex parts by simple uniaxial or sequential biaxial linear tool paths. In the paper, promising tool systems and geometries as well as results of theoretical and experimental research work (e.g. regarding the influence and interaction of process parameters on the workpiece quality) will be discussed. Furthermore, possibilities regarding the manufacturing of geometries (demonstrator workpieces) which are not or only hardly producible with conventional processes will be presented.

Reflection on solutions in the form of refutation texts versus problem solving: the case of 8th graders studying simple electric circuits

NASA Astrophysics Data System (ADS)

Safadi, Rafi'; Safadi, Ekhlass; Meidav, Meir

2017-01-01

This study compared students’ learning in troubleshooting and problem solving activities. The troubleshooting activities provided students with solutions to conceptual problems in the form of refutation texts; namely, solutions that portray common misconceptions, refute them, and then present the accepted scientific ideas. They required students to individually diagnose these solutions; that is, to identify the erroneous and correct parts of the solutions and explain in what sense they differed, and later share their work in whole class discussions. The problem solving activities required the students to individually solve these same problems, and later share their work in whole class discussions. We compared the impact of the individual work stage in the troubleshooting and problem solving activities on promoting argumentation in the subsequent class discussions, and the effects of these activities on students’ engagement in self-repair processes; namely, in learning processes that allowed the students to self-repair their misconceptions, and by extension on advancing their conceptual knowledge. Two 8th grade classes studying simple electric circuits with the same teacher took part. One class (28 students) carried out four troubleshooting activities and the other (31 students) four problem solving activities. These activities were interwoven into a twelve lesson unit on simple electric circuits that was spread over a period of 2 months. The impact of the troubleshooting activities on students’ conceptual knowledge was significantly higher than that of the problem solving activities. This result is consistent with the finding that the troubleshooting activities engaged students in self-repair processes whereas the problem solving activities did not. The results also indicated that diagnosing solutions to conceptual problems in the form of refutation texts, as opposed to solving these same problems, apparently triggered argumentation in subsequent class discussions, even though the teacher was unfamiliar with the best ways to conduct argumentative classroom discussions. We account for these results and suggest possible directions for future research.

Active technique by suction to control the flow structure over a van model

NASA Astrophysics Data System (ADS)

Harinaldi, Budiarso, Warjito, Kosasih, Engkos A.; Tarakka, Rustan; Simanungkalit, Sabar P.

2012-06-01

Today research trend in car aerodynamics are carried out from the point of view of the durable development. Some car companies have the objective to develop control solution that enable to reduce the aerodynamic drag of vehicle. It provides the possibility to modify the flow separation to reduce the development of the swirling structures around the vehicle. In this study, a family van is modeled with a modified form of Ahmed's body by changing the orientation of the flow from its original form (modified/reversed Ahmed Body). This model is equipped with a suction on the rear side to comprehensively examine the pressure field modifications that occur. The investigation combines computational and experimental work. The computational simulation used is k-epsilon flow turbulence model. The reversed Ahmed body used in the investigation has slant angle (φ) 35° at the front part. In the computational work, meshing type is tetra/hybrid element with hex core type and the grid number is more than 1.7 million in order to ensure detail discretization and more accurate calculation results. The boundary condition is upstream velocity of 11.1 m/s. Mean free stream at far upstream region is assumed in a steady state condition and uniform. The suction velocity is set at 1 m/s. Meanwhile in the experimental work a reversed Ahmed model is tested in a controlled wind tunnel experiments. The main measurement is the drag aerodynamic measurement at rear of the body of the model using strain gage. The results show that the application of a suction in the rear part of the van model give the effect of reducing the wake and the vortex is formed. Aerodynamic drag reduction close to 24% for the computational approach and 14.8% for the experimental approach by introducing a suction have been obtained.

12 CFR Appendix B to Part 202 - Model Application Forms

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Model Application Forms B Appendix B to Part... CREDIT OPPORTUNITY ACT (REGULATION B) Pt. 202, App. B Appendix B to Part 202—Model Application Forms 1... appear on the creditor's form. 3. If a creditor uses an appropriate Appendix B model form, or modifies a...

A modular tooling set-up for incremental sheet forming (ISF) with subsequent stress-relief annealing under partial constraints

NASA Astrophysics Data System (ADS)

Maqbool, Fawad; Bambach, Markus

2017-10-01

Incremental sheet forming (ISF) is a manufacturing process most suitable for small-batch production of sheet metal parts. In ISF, a CNC-controlled tool moves over the sheet metal, following a specified contour to form a part of the desired geometry. This study focuses on one of the dominant process limitations associated with the ISF, i.e., the limited geometrical accuracy. In this regard, a case study is performed which shows that increased geometrical accuracy of the formed part can be achieved by a using stress-relief annealing before unclamping. To keep the tooling costs low, a modular die design consisting of a stiff metal frame and inserts made from inexpensive plastics (Sika®) were devised. After forming, the plastics inserts are removed. The metal frame supports the part during stress-relief annealing. Finite Element (FE) simulations of the manufacturing process are performed. Due to the residual stresses induced during the forming, the geometry of the formed part, from FE simulation and the actual manufacturing process, shows severe distortion upon unclamping the part. Stress relief annealing of the formed part under partial constraints exerted by the tool frame shows that a part with high geometrical accuracy can be obtained.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maiti, Tushar K.; Permaul, Michelle; Boudreaux, David A.

Ubiquitin carboxy-terminal hydrolase L5 (UCHL5) is a proteasome-associated deubiquitinating enzyme, which, along with RPN11 and USP14, is known to carry out deubiquitination on proteasome. As a member of the ubiquitin carboxy-terminal hydrolase (UCH) family, UCHL5 is unusual because, unlike UCHL1 and UCHL3, it can process polyubiquitin chain. However, it does so only when it is bound to the proteasome; in its free form, it is capable of releasing only relatively small leaving groups from the C-terminus of ubiquitin. Such a behavior might suggest at least two catalytically distinct forms of the enzyme, an apo form incapable of chain processing activity,more » and a proteasome-induced activated form capable of cleaving polyubiquitin chain. Through the crystal structure analysis of two truncated constructs representing the catalytic domain (UCH domain) of this enzyme, we were able to visualize a state of this enzyme that we interpret as its inactive form, because the catalytic cysteine appears to be in an unproductive orientation. While this work was in progress, the structure of a different construct representing the UCH domain was reported; however, in that work the structure reported was that of an inactive mutant [catalytic Cys to Ala; Nishio K et al. (2009) Biochem Biophys Res Commun390, 855-860], which precluded the observation that we are reporting here. Additionally, our structures reveal conformationally dynamic parts of the enzyme that may play a role in the structural transition to the more active form.« less

Hope, self-efficacy, spiritual well-being and job satisfaction.

PubMed

Duggleby, Wendy; Cooper, Dan; Penz, Kelly

2009-11-01

Hope, self-efficacy, spiritual well-being and job satisfaction. This paper is a report of a study of the relations of spiritual well-being, global job satisfaction, and general self-efficacy to hope in Continuing Care Assistants. Healthcare providers have described their hope as an important part of their work and a form of work motivation. Hope may be an important factor in preventing burnout and improving job satisfaction. A concurrent triangulation mixed method design was used. Sixty-four Continuing Care Assistants (personal care aides) who registered for a 'Living with Hope' Conference completed a demographic form, Herth Hope Index, Global Job Satisfaction Questionnaire, Spiritual Well-Being Scale, General Self-Efficacy Scale, and a hope questionnaire. Data were collected in 2007. The response rate was 58%. Using linear regression, 29.9% of the variance in Herth Hope Index score was accounted for by scores from the General Self-Efficacy Scale and Spiritual Well-Being Scale. General Self-efficacy scores (positive relationship) and Spiritual Well-Being scores (negative relationship) accounted for a significant part of the variance. Qualitative data supported all findings, with the exception of the negative relationship between hope and spiritual well-being; participants wrote that faith, relationships, helping others and positive thinking helped them to have hope. They also wrote that hope had a positive influence on their job satisfaction and performance. Hope is an important concept in the work life of Continuing Care Assistants. Supportive relationships, adequate resources, encouragement by others, and improving perceptions of self-efficacy (ability to achieve goals in their workplace) may foster their hope.

Results of Tests on Radiators for Aircraft Engines

NASA Technical Reports Server (NTRS)

Dickinson, H C; James, W S; Kleinschmidt, R V

1920-01-01

Part 1 is to present the results of tests on 56 types of core in a form convenient for use in the study of the performance of and possible improvements in existing designs. Working rules are given by which the data contained in the report may be used, and the most obvious conclusions as to the behavior of cores are summarized. Part 2 presents the results of tests made to determine the pressure necessary to produce water flows up to 50 gallons per minute through an 8-inch square section of radiator core. These data are of special value in evaluating the hydraulic head against which the circulating pump is required to operate.

Clinical Considerations Regarding Regression in Psychotherapy with Patients with Conversion Disorder.

PubMed

Kaplan, Marcia

Regression is a ubiquitous phenomenon in psychodynamic psychotherapy and psychoanalysis, typically part of a reorganization that leads to progression, at least with respect to recruiting elements in the unconscious to consciousness. Regression in patients with conversion disorder (i.e., pseudo-neurological symptoms without an organic basis) is often itself somatic/physical rather than psychic in nature. Psychotherapists working with these patients must be prepared for confusing or frightening forms of regression that should be expected as part of the therapeutic process. In conversion disorder patients with adequate character structure, this regression, when handled effectively by the psychotherapist, ultimately leads to verbalized thoughts and feelings and a gradually strengthening alternative to physically experienced psychic conflict.

Topics in black holes and quantum cosmology

NASA Astrophysics Data System (ADS)

Campiglia, Miguel

2012-06-01

Black holes and the big bang beginning of the universe are among the most spectacular predictions of general relativity, having a broad impact that ranges from observational astronomy to quantum gravity. In this thesis we will focus on classical and quantum aspects of these subjects: In the first part we present a coordinate-free way of describing the approach to equilibrium of black holes within the framework of dynamical and isolated horizons. In the second part we focus on loop quantum cosmology. We present a uniqueness theorem of its kinematics, and explore the possible ways to implement its dynamics via path integrals.¹ ¹The topics presented here form part of the research done during my PhD studies. See the Vita at the end of the Thesis for a complete list of my work during this period.

32 CFR Appendix C to Part 45 - DD Form 215

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 215 C Appendix C to Part 45 National... CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. C Appendix C to Part 45—DD Form 215 EC21OC91.050 ...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

49 CFR Appendix G to Part 40 - Alcohol Testing Form

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Alcohol Testing Form G Appendix G to Part 40 Transportation Office of the Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Pt. 40, App. G Appendix G to Part 40—Alcohol Testing Form The following form is the...

Evidence for Ring Structures and Fracture Zones in the Tectonics of Kerguelen Archipelago, Indian Ocean

NASA Astrophysics Data System (ADS)

Mathieu, L.; Byrne, P. K.; van Wyk de Vries, B.; Moine, B.

2009-12-01

Little work has been done on the tectonics of the emergent areas of the Kerguelen Archipelago, even though the extensive outcrop renders the islands especially good for structural work. The results of two field campaigns and remote sensing analysis carried out in the central part of the archipelago around the Val Travers valley and the Mt Ross volcano are presented. The Archipelago is part of the Kerguelen Plateau, a Large Igneous Province that has developed in the Indian Ocean from the early Cretaceous. It spread along the newly formed SE Indian mid-oceanic ridge (SEIR) during the early Tertiary. The rifting event produced NW-SE, N-S and E-W striking grabens in the plateau that are respectively, parallel to the SEIR, related to sinistral strike-slip movements along the SEIR, and of unknown origin. The Kerguelen Archipelago formed after the rifting event over the plateau but nevertheless, it contains the bulk of structural directions mentioned above. The lavas (Plateau Basalts) that make up most of the area are densely fractured, crossed by many veins and some small faults as well as dykes. The rare faults identified are either normal or affected by sinistral transtensional movements. The fractures have mainly a NW-SE orientation that is consistent with extension related to the SEIR. Dykes, veins and normal faults strike E-W and are related to a dominant N-S directed regional extension. The scarcity of discrete faults contrasts with the density of fractures and other lineaments that appear to cover the bulk of land exposed to remote sensing observations. Such structures were formed by regional deformation too small to produce large discrete faults. We also have found a 20 km-wide polygonal fracture pattern encircling Mt Ross Volcano. This structure could be linked to repeated deflation and inflation of the ground related to a buried intrusive complex. Again, the movements are too small to produce discrete faults. Instead, they produce a polygon of deformation whose edges are parallel to buried rifting faults re-activated by the vertical movements. This work outlines the structure of the central part of the Kerguelen Archipelago that is affected by regional stresses and is imprinted by local tectonic structures related to intrusive activity. Kerguelen provides a structural situation that can be compared with Iceland and also with volcano-tectonic structures on other planets.

Affordances and the musically extended mind.

PubMed

Krueger, Joel

2014-01-06

I defend a model of the musically extended mind. I consider how acts of "musicking" grant access to novel emotional experiences otherwise inaccessible. First, I discuss the idea of "musical affordances" and specify both what musical affordances are and how they invite different forms of entrainment. Next, I argue that musical affordances - via soliciting different forms of entrainment - enhance the functionality of various endogenous, emotion-granting regulative processes, drawing novel experiences out of us with an expanded complexity and phenomenal character. I argue that music therefore ought to be thought of as part of the vehicle needed to realize these emotional experiences. I appeal to different sources of empirical work to develop this idea.

Affordances and the musically extended mind

PubMed Central

Krueger, Joel

2014-01-01

I defend a model of the musically extended mind. I consider how acts of “musicking” grant access to novel emotional experiences otherwise inaccessible. First, I discuss the idea of “musical affordances” and specify both what musical affordances are and how they invite different forms of entrainment. Next, I argue that musical affordances – via soliciting different forms of entrainment – enhance the functionality of various endogenous, emotion-granting regulative processes, drawing novel experiences out of us with an expanded complexity and phenomenal character. I argue that music therefore ought to be thought of as part of the vehicle needed to realize these emotional experiences. I appeal to different sources of empirical work to develop this idea. PMID:24432008

Implementing quantum optics with parametrically driven superconducting circuits

NASA Astrophysics Data System (ADS)

Aumentado, Jose

Parametric coupling has received much attention, in part because it forms the core of many low-noise amplifiers in superconducting quantum information experiments. However, parametric coupling in superconducting circuits is, as a general rule, simple to generate and forms the basis of a methodology for interacting microwave fields at different frequencies. In the quantum regime, this has important consequences, allowing relative novices to do experiments in superconducting circuits today that were previously heroic efforts in quantum optics and cavity-QED. In this talk, I'll give an overview of some of our work demonstrating parametric coupling within the context of circuit-QED as well as some of the possibilities this concept creates in our field.

Review of German work on controlled re-entry technology

NASA Astrophysics Data System (ADS)

Wuest, Walter

The concept of a reusable space transporter formed a focus of much effort for the German firms Junkers Flugzeug- und Motorenwerke (JFM), Messerschmitt-Bölkow-Blohm und Voss (MBB) and Entwicklungsring Nord (ERNO), together with the Deutsche Forschungs- und Veruchsanstalt für Luft- und Raumfahrt (DFVLR) and different University institutes during the decade beginning 1962. The result was the definition, in 1972, of a program of the “Arbeitsgruppe Rückkehrtechnologie” (ART, Working group for reentry technology) which integrated all relevant capacities of research establishments, industry, and universities. The aim was the maintenance of the technical-scientific capabilities for advanced high velocity flight systems and to qualify for international cooperation in this field. Only a small part of this work could be completed, as the ART-program was never accepted by the German Ministry for Research and Technology. So the current work was stopped by the end of 1975. Nevertheless, as the ART-program can serve as a guide-line for possible future work a summary of this work is given.

Mothering: an unacknowledged aspect of undergraduate clinical teachers' work in nursing.

PubMed

McKenna, Lisa; Wellard, Sally

2009-05-01

Clinical education is an important component of undergraduate nurse education, in which clinical teachers facilitate students' application of theoretical classroom knowledge into the clinical practice setting. Mothering as part of clinical teachers' work was a major finding from a larger study exploring clinical teaching work to identify what shaped their work and barriers to their work in clinical settings. The study used semi-structured interviews, informed by the work of Foucault. Maternal discourses emerged as a predominant one as participants presented their relationships with students describing examples of nurturing, protecting, supporting, guiding and providing discipline. The unexpected finding contradicted the dominant view of students as adult learners, and potentially positions them as dependent in their learning in clinical environments. Exploration of this discourse in the context of the study forms the basis of this paper. It is argued that the overall impact of maternal discourses on clinical teaching and learning is unclear but warrants more detailed investigation.

Modified locking thread form for fastener

NASA Technical Reports Server (NTRS)

Roopnarine, (Inventor); Vranish, John D. (Inventor)

1998-01-01

A threaded fastener has a standard part with a standard thread form characterized by thread walls with a standard included angle, and a modified part complementary to the standard part having a modified thread form characterized by thread walls which are symmetrically inclined with a modified included angle that is different from the standard included angle of the standard part's thread walls, such that the threads of one part make pre-loaded edge contact with the thread walls of the other part. The thread form of the modified part can have an included angle that is greater, less, or compound as compared to the included angle of the standard part. The standard part may be a bolt and the modified part a nut, or vice versa. The modified thread form holds securely even under large vibrational forces, it permits bi-directional use of standard mating threads, is impervious to the build up of tolerances and can be manufactured with a wider range of tolerances without loss of functionality, and distributes loading stresses (per thread) in a manner that decreases the possibility of single thread failure.

An essay on dreaming, psychical working out and working through.

PubMed

da Rocha Barros, Elias M

2002-10-01

In this paper the author attempts to expand the idea put forward by Freud who considered dreams as a special form of unconscious thinking. It is the author's contention that the psychical working-out function performed by dreams is a form of unconscious thinking, which transforms affects into memories and mental structures. He also attempts to clarify the way in which meaning is built and transformed in mental life. In that respect the unconscious internal world is seen as a form of unconscious thinking, a private theatre where meaning is generated and transformed. He focuses on what happens to feelings in dreams in connection with the meanings as a result of and an expression of the several stages of working through. The dream world is described as the setting where the mind gives expressive pictorial representation to the emotions involved in a conflict: a first step towards thinkability. The dreamwork also constitutes a process through which meaning is apprehended, built on and transformed at an expressive non-discursive level, based on representation through figurative/pictorial images. The author draws on Meltzer's formulation to conjecture that the working-through function of dreams, mainly in response to interpretations, is performed by a process of progression in formal qualities of the representations made available by dreaming in the form he has called affective pictograms. It is through progression in formal qualities of the representation that the thinking capabilities of the affective life develop and become part of the process of what is called metaphorically the metabolisation of emotional life. This process takes place through migration of meaning across various levels of mental process. In this perspective the analyst's interpretations of dreams effect what linguists call transmutation of the symbolic basis, a process that is necessary to help the mind to improve its capacity to think. Something expressed on the evocative plane and condensed into a pictographic image is then transformed into verbal language that expresses meaning. These conceptions are illustrated by a detailed clinical case.

Closed-form summations of Dowker's and related trigonometric sums

NASA Astrophysics Data System (ADS)

Cvijović, Djurdje; Srivastava, H. M.

2012-09-01

Through a unified and relatively simple approach which uses complex contour integrals, particularly convenient integration contours and calculus of residues, closed-form summation formulas for 12 very general families of trigonometric sums are deduced. One of them is a family of cosecant sums which was first summed in closed form in a series of papers by Dowker (1987 Phys. Rev. D 36 3095-101 1989 J. Math. Phys. 30 770-3 1992 J. Phys. A: Math. Gen. 25 2641-8), whose method has inspired our work in this area. All of the formulas derived here involve the higher-order Bernoulli polynomials. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical in honour of Stuart Dowker's 75th birthday devoted to ‘Applications of zeta functions and other spectral functions in mathematics and physics’.

Influenza outbreak preparedness: lessons from outbreaks in residential care facilities in 2014.

PubMed

Vyas, Aditya; Ingleton, Andrew; Huhtinen, Essi; Hope, Kirsty; Najjar, Zeina; Gupta, Leena

2015-06-30

This report describes 6 influenza outbreaks in residential care facilities during the 2014 influenza season in the Sydney Local Health District. Vaccination rates were high among residents (95%) and low among staff (39%). The majority of residents with laboratory confirmed influenza (67%) did not meet the influenza-like illness case definition.Positive influenza specimens were subtyped as H3N2 (40%), H1N1 (5%) or not subtyped (55%). We illustrate the implications of low vaccine effectiveness and antigenic drift, and provide recommendations for the effective management of future influenza outbreaks. This work is copyright. You may download, display, print and reproduce the whole or part of this work in unaltered form for your own personal use or, if you are part of an organisation, for internal use within your organisation, but only if you or your organisation do not use the reproduction for any commercial purpose and retain this copyright notice and all disclaimer notices as part of that reproduction. Apart from rights to use as permitted by the Copyright Act 1968 or allowed by this copyright notice, all other rights are reserved and you are not allowed to reproduce the whole or any part of this work in any way (electronic or otherwise) without first being given the specific written permission from the Commonwealth to do so. Requests and inquiries concerning reproduction and rights are to be sent to the Online, Services and External Relations Branch, Department of Health, GPO Box 9848, Canberra ACT 2601, or by email to copyright@health.gov.au.

A Microstructure-Based Constitutive Model for Superplastic Forming

NASA Astrophysics Data System (ADS)

Jafari Nedoushan, Reza; Farzin, Mahmoud; Mashayekhi, Mohammad; Banabic, Dorel

2012-11-01

A constitutive model is proposed for simulations of hot metal forming processes. This model is constructed based on dominant mechanisms that take part in hot forming and includes intergranular deformation, grain boundary sliding, and grain boundary diffusion. A Taylor type polycrystalline model is used to predict intergranular deformation. Previous works on grain boundary sliding and grain boundary diffusion are extended to drive three-dimensional macro stress-strain rate relationships for each mechanism. In these relationships, the effect of grain size is also taken into account. The proposed model is first used to simulate step strain-rate tests and the results are compared with experimental data. It is shown that the model can be used to predict flow stresses for various grain sizes and strain rates. The yield locus is then predicted for multiaxial stress states, and it is observed that it is very close to the von Mises yield criterion. It is also shown that the proposed model can be directly used to simulate hot forming processes. Bulge forming process and gas pressure tray forming are simulated, and the results are compared with experimental data.

Characterizing workplace exposures in Vietnamese women working in California nail salons.

PubMed

Quach, Thu; Gunier, Robert; Tran, Alisha; Von Behren, Julie; Doan-Billings, Phuong-An; Nguyen, Kim-Dung; Okahara, Linda; Lui, Benjamin Yee-Bun; Nguyen, Mychi; Huynh, Jessica; Reynolds, Peggy

2011-12-01

We engaged Vietnamese nail salon workers in a community-based participatory research (CBPR) study to measure personal and area concentrations of solvents in their workplace. We measured average work-shift concentrations of toluene, ethyl acetate, and isopropyl acetate among 80 workers from 20 salons using personal air monitors. We also collected area samples from 3 salons using summa canisters. For personal measurements, the arithmetic mean was 0.53 parts per million (range = 0.02-5.50) for ethyl acetate, 0.04 parts per million (range = 0.02-0.15) for isopropyl acetate, and 0.15 parts per million (range = 0.02-1.0) for toluene. Area measurements were lower in comparison, but we detected notable levels of methyl methacrylate, a compound long banned from nail products. Predictors of solvent levels included different forms of ventilation and whether the salon was located in an enclosed building. Using a CBPR approach that engaged community members in the research process contributed to the successful recruitment of salon workers. Measured levels of toluene, methyl methacrylate, and total volatile organic compounds were higher than recommended guidelines to prevent health symptoms such as headaches, irritations, and breathing problems, which were frequently reported in this workforce.

Latest Researches Advances of Plasma Spraying: From Splat to Coating Formation

NASA Astrophysics Data System (ADS)

Fauchais, P.; Vardelle, M.; Goutier, S.

2016-12-01

The plasma spray process with solid feedstock, mainly ceramics powders, studied since the sixties is now a mature technology. The plasma jet and particle in-flight characterizations are now well established. The use of computer-aided robot trajectory allows spraying on industrial parts with complex geometries. Works about splat formation have shown the importance of: the substrate preheating over the transition temperature to get rid of adsorbates and condensates, substrate chemistry, crystal structure and substrate temperature during the whole coating process. These studies showed that coating properties strongly depend on the splat formation and layering. The first part of this work deals with a summary of conventional plasma spraying key points. The second part presents the current knowledge in plasma spraying with liquid feedstock, technology developed for about two decades with suspensions of particles below micrometers or solutions of precursors that form particles a few micrometers sized through precipitation. Coatings are finely structured and even nanostructured with properties arousing the interest of researchers. However, the technology is by far more complex than the conventional ones. The main conclusions are that models should be developed further, plasma torches and injection setups adapted, and new measuring techniques to reliably characterize these small particles must be designed.

48 CFR 53.200 - Scope of subpart.

Code of Federal Regulations, 2010 CFR

2010-10-01

... to, the parts of the FAR in which the form usage requirements are addressed. For example, forms...; forms addressed in FAR part 43, Contract Modifications, are treated in this subpart in section 53.243... AND FORMS FORMS Prescription of Forms 53.200 Scope of subpart. This subpart prescribes standard forms...

17 CFR 405.2 - Reports to be made by registered government securities brokers and dealers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... government securities broker or dealer shall file Part I of Form BD-Y2K (§ 249.618 of this title) prepared as..., shall file Part II of Form BD-Y2K (§ 249.618 of this title). Part II of Form BD-Y2K shall address each... registered government securities broker or dealer that was not required to file Part II of Form BD-Y2K under...

[The development of vaporizers. A question of precise dose].

PubMed

Petermann, Heike

2009-05-01

Since the beginning of anaesthesia it was well known that anaesthetic agents administered by inhalation must be capable of existing in gaseous form. For vaporization various types tried to work accurately. Since oxygen was available there could be realized new concepts like the principles of injection or bubble through. With Copper Kettle (1948) for ether and chloroform and Draeger Vapor (1958) for Halothane accurate administration of volatile anaesthetics was available. Today vaporizers are part of anaesthetic machines.

The human operator transfer function: Identification of the limb mechanics subsystem

NASA Technical Reports Server (NTRS)

Jones, Lynette A.; Hunter, Ian W.

1991-01-01

The objective of our research is to decompose the performance of the human operator in terms of the subsystems that determine the operator's responses in order to establish how the dynamics of these component subsystems influence the operator's performance. In the present experiment, the dynamic stiffness of the human elbow joint was measured at rest and under different levels of biceps muscle activation; this work forms part of the analysis of the limb mechanics subsystem.

Low-Cost Sensors Deliver Nanometer-Accurate Measurements

NASA Technical Reports Server (NTRS)

2015-01-01

As part of a unique partnership program, Kennedy Space Center collaborated with a nearby business school to allow MBA students to examine and analyze the market potential for a selection of NASA-patented technologies. Following the semester, a group of students decided to form Winter Park, Florida-based Juntura Group Inc. to license and sell a technology they had worked with: a sensor capable of detecting position changes as small as 10 nanometers-approximately the thickness of a cell wall.

What Expectations Do Sixth-Form Students Have of Their Learning and Their Teachers and What Expectations Do Teachers Have of Their Students? Stage One of the Action Research Cycle

ERIC Educational Resources Information Center

Deuker, Charmaine

2014-01-01

Action research is an invaluable resource, which can be utilised by those involved in teaching and learning as a reflective tool enabling a person to make informed decisions about their working practices. Developing and improving teaching skills is an essential part of the teacher's role so this method was used to explore concerns that were…

Treatment of ’Battlefield Detainees’ in the War on Terrorism

DTIC Science & Technology

2007-01-23

Political Rights, Including the Question of Torture and Detention, Report of the Working Group on Arbitrary Detention, U.N. Commission on Human Rights...June 1999 (citing interview with DOD law of war expert Hayes Parks, who advocates a purely de facto standard, without regard to political factors). 72...Military Prosecutor v. Kassem , 47 I.L.R. 470 (1971) (excerpts reprinted in DOCUMENTS (continued...) GPW Art. 4A(1): Does Al Qaeda Form “Part of” the

How Computers Are Used in the Teaching of Music and Speculations about How Artificial Intelligence Could Be Applied to Radically Improve the Learning of Compositional Skills. CITE Report No. 6.

ERIC Educational Resources Information Center

Holland, Simon

This paper forms part of a preliminary survey for work on the application of artificial intelligence theories and techniques to the learning of music composition skills. The paper deals with present day applications of computers to the teaching of music and speculations about how artificial intelligence might be used to foster music composition in…

Shaping ability of ProFile.04 Taper Series 29 rotary nickel-titanium instruments in simulated root canals. Part 1.

PubMed

Thompson, S A; Dummer, P M

1997-01-01

The aim of this study was to determine the shaping ability of ProFile.04 Taper Series 29 nickel-titanium instruments in simulated canals. A total of 40 simulated root canals made up of four different shapes in terms of angle and position of curvature were prepared by ProFile instruments using a step-down approach. Part 1 of this two-part report describes the efficacy of the instruments in terms of preparation time, instrument failure, canal blockages, loss of canal length and three-dimensional canal form. The time necessary for canal preparation was not influenced significantly by canal shape. No instrument fractures occurred but a total of 52 instruments deformed. Size 6 instruments deformed the most followed by sizes 5, 3 and 4. Canal shape did not influence significantly instrument deformation. None of the canals became blocked with debris and loss of working distance was on average 0.5 mm or less. Intracanal impressions of canal form demonstrated that most canals had definite apical stops, smooth canal walls and good flow and taper. Under the conditions of this study, ProFile.04 Taper Series 29 rotary nickel-titanium instruments prepared simulated canals rapidly and created good three-dimensional form. A substantial number of instruments deformed but it was not possible to determine whether this phenomenon occurred because of the nature of the experimental model or through an inherent design weakness in the instruments.

Applications for Gradient Metal Alloys Fabricated Using Additive Manufacturing

NASA Technical Reports Server (NTRS)

Hofmann, Douglas C.; Borgonia, John Paul C.; Dillon, Robert P.; Suh, Eric J.; Mulder, jerry L.; Gardner, Paul B.

2013-01-01

Recently, additive manufacturing (AM) techniques have been developed that may shift the paradigm of traditional metal production by allowing complex net-shaped hardware to be built up layer-by-layer, rather than being machined from a billet. The AM process is ubiquitous with polymers due to their low melting temperatures, fast curing, and controllable viscosity, and 3D printers are widely available as commercial or consumer products. 3D printing with metals is inherently more complicated than with polymers due to their higher melting temperatures and reactivity with air, particularly when heated or molten. The process generally requires a high-power laser or other focused heat source, like an electron beam, for precise melting and deposition. Several promising metal AM techniques have been developed, including laser deposition (also called laser engineered net shaping or LENS® and laser deposition technology (LDT)), direct metal laser sintering (DMLS), and electron beam free-form (EBF). These machines typically use powders or wire feedstock that are melted and deposited using a laser or electron beam. Complex net-shape parts have been widely demonstrated using these (and other) AM techniques and the process appears to be a promising alternative to machining in some cases. Rather than simply competing with traditional machining for cost and time savings, the true advantage of AM involves the fabrication of hardware that cannot be produced using other techniques. This could include parts with "blind" features (like foams or trusses), parts that are difficult to machine conventionally, or parts made from materials that do not exist in bulk forms. In this work, the inventors identify that several AM techniques can be used to develop metal parts that change composition from one location in the part to another, allowing for complete control over the mechanical or physical properties. This changes the paradigm for conventional metal fabrication, which relies on an assortment of "post-processing" methods to locally alter properties (such as coating, heat treating, work hardening, shot peening, etching, anodizing, among others). Building the final part in an additive process allows for the development of an entirely new class of metals, so-called "functionally graded metals" or "gradient alloys." By carefully blending feedstock materials with different properties in an AM process, hardware can be developed with properties that cannot be obtained using other techniques but with the added benefit of the net-shaped fabrication that AM allows.

Using stamping punch force variation for the identification of changes in lubrication and wear mechanism

NASA Astrophysics Data System (ADS)

Voss, B. M.; Pereira, M. P.; Rolfe, B. F.; Doolan, M. C.

2017-09-01

The growth in use of Advanced High Strength Steels in the automotive industry for light-weighting and safety has increased the rates of tool wear in sheet metal stamping. This is an issue that adds significant costs to production in terms of manual inspection and part refinishing. To reduce these costs, a tool condition monitoring system is required and a firm understanding of process signal variation must form the foundation for any such monitoring system. Punch force is a stamping process signal that is widely collected by industrial presses and has been linked closely to part quality and tool condition, making it an ideal candidate as a tool condition monitoring signal. In this preliminary investigation, the variation of punch force due to different lubrication conditions and progressive wear are examined. Linking specific punch force signature changes to developing lubrication and wear events is valuable for die wear and stamping condition monitoring. A series of semi-industrial channel forming trials were conducted under different lubrication regimes and progressive die wear. Punch force signatures were captured for each part and Principal Component Analysis (PCA) was applied to determine the key Principal Components of the signature data sets. These Principal Components were linked to the evolution of friction conditions over the course of the stroke for the different lubrication regimes and mechanism of galling wear. As a result, variation in punch force signatures were correlated to the current mechanism of wear dominant on the formed part; either abrasion or adhesion, and to changes in lubrication mechanism. The outcomes of this study provide important insights into punch force signature variation, that will provide a foundation for future work into the development of die wear and lubrication monitoring systems for sheet metal stamping.

32 CFR Appendix B to Part 45 - DD Form 214ws

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 214ws B Appendix B to Part 45 National... CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. B Appendix B to Part 45—DD Form 214ws EC23OC91.007 ...

12 CFR Appendix A to Part 704 - Model Forms

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Model Forms A Appendix A to Part 704 Banks and... Pt. 704, App. A Appendix A to Part 704—Model Forms This appendix contains sample forms intended for... corporate credit union. (8) Paid-in capital is perpetual maturity and noncumulative dividend. I have read...

12 CFR Appendix A to Part 704 - Model Forms

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Model Forms A Appendix A to Part 704 Banks and... Pt. 704, App. A Appendix A to Part 704—Model Forms This appendix contains sample forms intended for... corporate credit union. (8) Paid-in capital is perpetual maturity and noncumulative dividend. I have read...

16 CFR Appendix D to Part 698 - Standardized form for requesting annual file disclosures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Standardized form for requesting annual file disclosures. D Appendix D to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. D Appendix D to Part 698—Standardized form for...

Comparative morphology and cytology of the male sperm-transmission organs in viviparous species of clinid fishes (Clinidae: Teleostei, Perciformes).

PubMed

Fishelson, Lev; Gon, Ofer; Holdengreber, Vered; Delarea, Yakob

2006-12-01

This work comprises the first comparative study of the morphology and cytology of the sperm transmission organs in males of 14 species of viviparous clinid fishes (Clinidae, Blennioidei, Teleostei). The form and dimensions of these organs differ among the various species studied. The organs are composed of intra-abdominal ampullae, into which the sperm ducts and urinary bladder anchor, and an external protruding intromittent papilla used for insemination. The form of the ampullae differs among the various species, from pear-shaped to horseshoe-shaped. It increases in dimensions with increasing length of the male. In all the species this organ is covered by a connective-tissue tunic that encompasses both circular and longitudinal striated muscle bundles. The lumina of the ampullae harbor the epididymis, a strongly convoluted and plicated duct, which becomes filled with spermatozeugmata during reproduction. From here, the epididymis continues into the protruding intromittent papillae, where its folds gradually straighten at the apical part of the intromittent organ. The form and dimensions of this copulatory organ also differ in the various species. Papillae bearing taste buds are found on the apical parts of the intromittent organ, and it is probable that these, together with the difference in forms of the organ, help to prevent interspecific copulation. Copyright 2006 Wiley-Liss, Inc.

KANSAS WIND POWERING AMERICAN STATE OUTREACH: KANSAS WIND WORKING GROUP

DOE Office of Scientific and Technical Information (OSTI.GOV)

HAMMARLUND, RAY

2010-10-27

The Kansas Wind Working Group (WWG) is a 33-member group announced by former Governor Kathleen Sebelius on Jan. 7, 2008. Formed through Executive Order 08-01, the WWG will educate stakeholder groups with the current information on wind energy markets, technologies, economics, policies, prospects and issues. Governor Mark Parkinson serves as chair of the Kansas Wind Working Group. The group has been instrumental in focusing on the elements of government and coordinating government and private sector efforts in wind energy development. Those efforts have moved Kansas from 364 MW of wind three years ago to over 1000 MW today. Further, themore » Wind Working Group was instrumental in fleshing out issues such as a state RES and net metering, fundamental parts of HB 2369 that was passed and is now law in Kansas. This represents the first mandatory RES and net metering in Kansas history.« less

Functional Requirements for an Electronic Work Package System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna H.

This document provides a set of high level functional requirements for a generic electronic work package (eWP) system. The requirements have been identified by the U.S. nuclear industry as a part of the Nuclear Electronic Work Packages - Enterprise Requirements (NEWPER) initiative. The functional requirements are mainly applied to eWP system supporting Basic and Moderate types of smart documents, i.e., documents that have fields for recording input such as text, dates, numbers, and equipment status, and documents which incorporate additional functionalities such as form field data “type“ validation (e.g. date, text, number, and signature) of data entered and/or self-populate basicmore » document information (usually from existing host application meta data) on the form when the user first opens it. All the requirements are categorized by the roles; Planner, Supervisor, Craft, Work Package Approval Reviewer, Operations, Scheduling/Work Control, and Supporting Functions. The categories Statistics, Records, Information Technology are also included used to group the requirements. All requirements are presented in Section 2 through Section 11. Examples of more detailed requirements are provided for the majority of high level requirements. These examples are meant as an inspiration to be used as each utility goes through the process of identifying their specific requirements. The report’s table of contents provides a summary of the high level requirements.« less

Method of forming and assembly of metal parts and ceramic parts

DOEpatents

Ripley, Edward B [Knoxville, TN

2011-11-22

A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

Simultaneous acquisition of differing image types

DOEpatents

Demos, Stavros G

2012-10-09

A system in one embodiment includes an image forming device for forming an image from an area of interest containing different image components; an illumination device for illuminating the area of interest with light containing multiple components; at least one light source coupled to the illumination device, the at least one light source providing light to the illumination device containing different components, each component having distinct spectral characteristics and relative intensity; an image analyzer coupled to the image forming device, the image analyzer decomposing the image formed by the image forming device into multiple component parts based on type of imaging; and multiple image capture devices, each image capture device receiving one of the component parts of the image. A method in one embodiment includes receiving an image from an image forming device; decomposing the image formed by the image forming device into multiple component parts based on type of imaging; receiving the component parts of the image; and outputting image information based on the component parts of the image. Additional systems and methods are presented.

Mathematical Foundation for Plane Covering Using Hexagons

NASA Technical Reports Server (NTRS)

Johnson, Gordon G.

1999-01-01

This work is to indicate the development and mathematical underpinnings of the algorithms previously developed for covering the plane and the addressing of the elements of the covering. The algorithms are of interest in that they provides a simple systematic way of increasing or decreasing resolution, in the sense that if we have the covering in place and there is an image superimposed upon the covering, then we may view the image in a rough form or in a very detailed form with minimal effort. Such ability allows for quick searches of crude forms to determine a class in which to make a detailed search. In addition, the addressing algorithms provide an efficient way to process large data sets that have related subsets. The algorithms produced were based in part upon the work of D. Lucas "A Multiplication in N Space" which suggested a set of three vectors, any two of which would serve as a bases for the plane and also that the hexagon is the natural geometric object to be used in a covering with a suggested bases. The second portion is a refinement of the eyeball vision system, the globular viewer.

Development of a prototype spatial information processing system for hydrologic research

NASA Technical Reports Server (NTRS)

Sircar, Jayanta K.

1991-01-01

Significant advances have been made in the last decade in the areas of Geographic Information Systems (GIS) and spatial analysis technology, both in hardware and software. Science user requirements are so problem specific that currently no single system can satisfy all of the needs. The work presented here forms part of a conceptual framework for an all-encompassing science-user workstation system. While definition and development of the system as a whole will take several years, it is intended that small scale projects such as the current work will address some of the more short term needs. Such projects can provide a quick mechanism to integrate tools into the workstation environment forming a larger, more complete hydrologic analysis platform. Described here are two components that are very important to the practical use of remote sensing and digital map data in hydrology. Described here is a graph-theoretic technique to rasterize elevation contour maps. Also described is a system to manipulate synthetic aperture radar (SAR) data files and extract soil moisture data.

Solid-State NMR Study of the Cicada Wing.

PubMed

Gullion, John D; Gullion, Terry

2017-08-17

Wings of flying insects are part of the cuticle which forms the exoskeleton. The primary molecular components of cuticle are protein, chitin, and lipid. How these components interact with one another to form the exoskeleton is not completely understood. The difficulty in characterizing the cuticle arises because it is insoluble and noncrystalline. These properties severely limit the experimental tools that can be used for molecular characterization. Solid-state nuclear magnetic resonance experiments have been used in the past to characterize the exoskeleton of beetles and have found that chitin and protein make comparable contributions to the molecular matrix. However, little work has been done to characterize the components of the wing, which includes vein and membrane. In this work, solid-state NMR was used to characterize the wing of the 17-year cycle cicada (Magicicada cassini) that appeared in northern West Virginia during the summer of 2016. The NMR results show noticeable differences between the molecular components of the vein and membrane.

Evidence-Based Practice in the social sciences? A scale of causality, interventions, and possibilities for scientific proof

PubMed Central

Tellings, Agnes

2017-01-01

This article discusses Evidence-Based Practice (EBP) in the social sciences. After a brief outline of the discussion, the work of William Herbert Dray (1921–2009) is examined. Dray, partly following Collingwood, worked on different forms of causality and methodology in historical explanation (in comparison to the social sciences), based on a distinction between causes and reasons. Dray’s ladder of rational understanding is also explored here. Taking his argumentation further and sometimes turning it upside-down, a scale of forms of causality is developed with accompanying types of interventions and possibilities for scientific proof of their effectivity. This scale makes it possible to weigh interventions regarding the degree to which “hard” scientific proof is possible for them. The article concludes with a brief discussion of how interventions in psychology and education should be chosen and can be justified, both those that do and those that don’t lend themselves to empirical research. PMID:28989240

48 CFR 453.108 - Recommendations concerning forms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Recommendations concerning... AND FORMS FORMS General 453.108 Recommendations concerning forms. Contracting officers shall submit recommendations for new forms or to revise, eliminate, or consolidate forms prescribed by FAR part 53 and part 453...

Method of forming and assembly of metal and ceramic parts

DOEpatents

Ripley, Edward B

2014-04-22

A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

2 CFR Appendix X to Part 200 - Data Collection Form (Form SF-SAC)

Code of Federal Regulations, 2014 CFR

2014-01-01

... 2 Grants and Agreements 1 2014-01-01 2014-01-01 false Data Collection Form (Form SF-SAC) X Appendix X to Part 200 Grants and Agreements Office of Management and Budget Guidance for Grants and... PRINCIPLES, AND AUDIT REQUIREMENTS FOR FEDERAL AWARDS Pt. 200, App. X Appendix X to Part 200—Data Collection...

Crossing the barrier between the laboratory working model and the practicable production model

NASA Astrophysics Data System (ADS)

Curby, William A.

1992-12-01

Transforming apparatus that has developed into a successfully working laboratory system into a system that is ready, or nearly ready for production, distribution and general use is not always accomplished in a cost effective or timely fashion. Several design elements must be considered interactively during the planning, construction, use and servicing of the final production form of the system. The basic design elements are: Operating Specifications, Reliability Factors, Safety Factors, Precision Limits, Accuracy Limits, Uniformity Factors, Cost Limits and Calibration Requirements. Secondary elements including: Human Engineering, Documentation, Training, Maintenance, Proprietary Rights, Protection, Marketing, Replacement of Parts, and Packing and Shipping must also be considered during the transition.

Explicit control of adaptive automation under different levels of environmental stress.

PubMed

Sauer, Jürgen; Kao, Chung-Shan; Wastell, David; Nickel, Peter

2011-08-01

This article examines the effectiveness of three different forms of explicit control of adaptive automation under low- and high-stress conditions, operationalised by different levels of noise. In total, 60 participants were assigned to one of three types of automation design (free, prompted and forced choice). They were trained for 4 h on a highly automated simulation of a process control environment, called AutoCAMS. This was followed by a 4-h testing session under noise exposure and quiet conditions. Measures of performance, psychophysiology and subjective reactions were taken. The results showed that all three modes of explicit control of adaptive automation modes were able to attenuate the negative effects of noise. This was partly due to the fact that operators opted for higher levels of automation under noise. It also emerged that forced choice showed marginal advantages over the two other automation modes. Statement of Relevance: This work is relevant to the design of adaptive automation since it emphasises the need to consider the impact of work-related stressors during task completion. During the presence of stressors, different forms of operator support through automation may be required than under more favourable working conditions.

3D surface coordinate inspection of formed sheet material parts using optical measurement systems and virtual distortion compensation

NASA Astrophysics Data System (ADS)

Weckenmann, Albert A.; Gall, P.; Gabbia, A.

2005-02-01

Modern forming technology allows the production of highly sophisticated free form sheet material components, affording great flexibility to the design and manufacturing processes across a wide range of industries. This increased design and manufacturing potential places an ever growing demand on the accompanying inspection metrology. As a consequence of their surface shape, these parts underlie a reversible geometrical deformation caused by variations of the material and the manufacturing process, as well as by gravity. This distortion is removed during the assembly process, usually performed in automated robotic processes. For this reason, the part's tolerated parameters have to be inspected in a defined state, simulating the assembly process' boundary conditions. Thus, the inspection process chain consists of six steps: picking the workpiece up, manual fixation of the workpiece, tactile measurement of the surface's coordinates using a defined measurement strategy, manual removal of the fixation and removal of the workpiece from the inspection area. These steps are both laborious and time consuming (for example, the inspection of a car door can take up to a working day to complete). Using optical measuring systems and virtual distortion compensation, this process chain can be dramatically shortened. Optical measuring systems provide as a measurement result a point cloud representing a sample of all nearest surfaces in the measuring range containing the measurand. From this data, a surface model of the measurand can be determined, independent of its position in the measuring range. For thin sheet material parts an approximating finite element model can be deduced from such a surface model. By means of pattern recognition, assembly relevant features of the measurand can be identified and located on this model. Together with the boundary conditions given by the assembly process, the shape of the surface in its assembled state can be calculated using the finite elements method. In application these methods culminate in a shortened inspection process chain (which can now also be automated): picking the workpiece up, placing it in the measuring range, optical measurement, virtual distortion compensation and removal of the workpiece from the inspection area. This work discusses the methodology of our approach in detail and also provides and analyses experimental results. The underlying research was greatfully funded by the German Research Foundation (DFG).

[Labour, silence and order: visualizing modern psychiatry--strategies for legitimizing Swiss asylum psychiatry in the context of occupational therapy in the interwar period].

PubMed

Germann, Urs

2006-01-01

In the 1930s Swiss psychiatrists were engaged in a singular public campaign to promote a new image of their profession. The result of this campaign was a series of booklets about psychiatric institutions. These asylum-monographs, as they were called, encompassed a large number of photographic illustrations, most of which showed patients at work. Taking the visual omnipresence of patients' work in the asylum-monographs as a starting point, this contribution examines the status of occupational therapy in psychiatric discourse and practice in Switzerland at the beginning of the 1930s. The first part of the contribution describes and outlines the development of patients' work in several psychiatric institutions after World War I. Then it turns to the discussion about the introduction of a new and more active form of occupational therapy ("aktivere Therapie") in this period. The second part of the contribution analyzes the meanings of therapeutic work in psychiatric discourse. It shows that the enthusiasm occupational therapy produced among Swiss psychiatrists was mainly due to its ability to change the visual appearance of the asylums. Furthermore it points to several traits of Eugen Bleuler's concept of schizophrenia, especially the assumption of different ranks of primary and secondary symptoms and the notion of autism, which were both crucial to the contemporary understanding and handling of occupational therapy. Finally, it argues that a medical interpretation of patients' work, which identified therapy with working discipline, was a necessary precondition for the omnipresence of patients' work in Swiss psychiatry's public campaign in the 1930s.

Factors related to performance effectiveness of dental nurse in primary care unit in the northeastern part of Thailand.

PubMed

Wijaranaphiti, Saowaluk; Krugkrunjit, Peera; Intaraprasong, Bhusita

2009-12-01

To investigate the relationships between job characteristics, motivation, role stress and performance effectiveness of dental nurses in primary care units in the northeastern part of Thailand. A explanatory cross-sectional study was conducted in 326 dental nurses who were working in 310 PCUs of 19 provinces, 220 amphurs in the northeastern part of Thailand were taken as the study samples. Data were collected by using questionnaires. Pearson's Product Moment Correlation was applied to test between job characteristic model, motivation, role stress and performance effectiveness. The analysis showed that there was no relationship between job characteristics model and performance effectiveness as performing dental task needed 'dealing with others' and 'task significance'. There was a positive relationship between motivation and performance effectiveness at a low level. Role stress was not related to performance effectiveness; however, when the dental nurse had more stress caused by role conflict internal standard, several roles and their performance effectiveness was reduced. From the research result, it is necessary to help construct networks of dental tasks and other public health tasks in obvious forms, for some feedback from agents. Work allocation should be precisely arranged and professional skill should be determined responsibility. Lastly, recruiting dental nurses with proper characteristics in primary care units in the northeastern part of Thailand is crucial as well.

Screening assessment and requirements for a comprehensive assessment: Volume 1, Draft. Columbia River comprehensive impact assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-04-01

To evaluate the impact to the Columbia River from the Hanford Site-derived contaminants, the U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington State Department of Ecology initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, tribal, stockholder, and public involvement, the CRCIA Management Team was formed in August 1995. The Team agreed to conduct CRCIA using a phased approach. The initial phase, includes two components: 1) a screening assessment to evaluate the potential impact to the river, resulting frommore » current levels of Hanford-derived contaminants in order to support decisions on Interim Remedial Measures, and 2) a definition of the essential work remaining to provide an acceptable comprehensive river impact assessment. The screening assessment is described in Part I of this report. The essential work remaining is Part II of this report. The objective of the screening assessment is to identify areas where the greatest potential exists for adverse effects on humans or the environment. Part I of this report discusses the scope, technical approach, and results of the screening assessment. Part II defines a new paradigm for predecisional participation by those affected by Hanford cleanup decisions.« less

On the modeling of separation foils in thermoforming simulations

NASA Astrophysics Data System (ADS)

Margossian, Alexane; Bel, Sylvain; Hinterhölzl, Roland

2016-10-01

Composite forming simulations consist in modelling the forming process of composite components to anticipate the occurrence of potential flaws such as out-of-plane wrinkles and fibre re-orientation. Forming methods often consist of automated processes in which flat composite blanks are forced to comply with tool geometries. Although Finite Element forming simulations require the modelling of all stakeholders (blankholder, tooling and composite blank), consumables such as separation films are often not considered. Used in thermoforming processes, these films are placed between tooling and composite to ease part removal after forming. These films are also used to decrease tool/ply friction and thus, enhance forming quality. This work presents thermoforming simulations of pre-impregnated carbon fibre thermoplastic blanks in which separation films are modelled in the same manner as composite layers, i.e. by a layer of shell elements. The mechanical properties of such films are also characterised at the same temperature as forming occurs. The proposed approach is finally compared to the actual modelling method, in which separation films are not modelled as such but in which their influence is only considered within the friction coefficient between tooling and blank.

Dataset of aggregate producers in New Mexico

USGS Publications Warehouse

Orris, Greta J.

2000-01-01

This report presents data, including latitude and longitude, for aggregate sites in New Mexico that were believed to be active in the period 1997-1999. The data are presented in paper form in Part A of this report and as Microsoft Excel 97 and Data Interchange Format (DIF) files in Part B. The work was undertaken as part of the effort to update information for the National Atlas. This compilation includes data from: the files of U.S. Geological Survey (USGS); company contacts; the New Mexico Bureau of Mines and Mineral Resources, New Mexico Bureau of Mine Inspection, and the Mining and Minerals Division of the New Mexico Energy, Minerals and Natural Resources Department (Hatton and others, 1998); the Bureau of Land Management Information; and direct communications with some of the aggregate operators. Additional information on most of the sites is available in Hatton and others (1998).

New Mexico aggregate production sites, 1997-1999

USGS Publications Warehouse

Orris, Greta J.

2000-01-01

This report presents data, including latitude and longitude, for aggregate sites in New Mexico that were believed to be active in the period 1997-1999. The data are presented in paper form in Part A of this report and as Microsoft Excel 97 and Data Interchange Format (DIF) files in Part B. The work was undertaken as part of the effort to update information for the National Atlas. This compilation includes data from: the files of U.S. Geological Survey (USGS); company contacts; the New Mexico Bureau of Mines and Mineral Resources, New Mexico Bureau of Mine Inspection, and the Mining and Minerals Division of the New Mexico Energy, Minerals and Natural Resources Department (Hatton and others, 1998); the Bureau of Land Management Information; and direct communications with some of the aggregate operators. Additional information on most of the sites is available in Hatton and others (1998).

Virtual microscopy and digital cytology: state of the art.

PubMed

Giansanti, Daniele; Grigioni, Mauro; D'Avenio, Giuseppe; Morelli, Sandra; Maccioni, Giovanni; Bondi, Arrigo; Giovagnoli, Maria Rosaria

2010-01-01

The paper approaches a new technological scenario relevant for the introduction of the digital cytology (D-CYT) in the health service. A detailed analysis of the state of the art on the status of the introduction of D-CYT in the hospital and more in general in the dispersed territory has been conducted. The analysis was conducted in a form of review and was arranged into two parts: the first part focused on the technological tools needed to carry out a successful service (client server architectures, e-learning, quality assurance issues); the second part focused on issues oriented to help the introduction and evaluation of the technology (specific training in D-CYT, health technology assessment in-routine application, data format standards and picture archiving computerized systems (PACS) implementation, image quality assessment, strategies of navigation, 3D-virtual-reality potentialities). The work enlightens future scenarios of actions relevant for the introduction of the technology.

Measuring Thermoforming Behaviour

NASA Astrophysics Data System (ADS)

Michaeli, W.; Hopmann, C.; Ederleh, L.; Begemann, M.

2011-05-01

Thermoforming is the process of choice for manufacturing thin-gauge or large-area parts for packaging or technical applications. The process allows low-weight parts to be produced rapidly and economically from thermoplastic semi-finished products. A technical and consequently economical problem is the choice of the right material in combination with the thermoformability of the product. The prediction of thermoformability includes the aspired product features and geometry and defined wall thickness distributions, depending on the specific stretchability of the semifinished product. In practice, thermoformability is estimated by empirical tests with the particular semi-finished product using e.g. staged pyramidal moulds or model cars. With this method, it still cannot be ensured that the product can be thermoformed with the intended properties. A promising alternative is the forming simulation using finite element analysis (FEA). For the simulation, it is necessary to describe the material behaviour using defined material models and the appropriate parameters. Therefore, the stress-/strain-behaviour of the semi-finished product under defined conditions is required. There are several, entirely different measurement techniques used in industry and at research facilities. This paper compares a choice of different measurement techniques to provide an objective basis for future work and research. The semi-finished products are examined with the Membrane-Inflation-Rheometer (MIR), an equibiaxial strain rheometer. A flat sample is heated to the desired temperature in silicone oil. During the measurement, a servohydraulic linear drive advances a piston, thus displacing the hot silicone oil and inflating the specimen to form a sphere. Further measurements are carried out with the Karo IV Laboratory Stretching Machine at Brückner Maschinenbau GmbH & Co. KG, Siegsdorf, Germany. The samples are heated using hot air. During the biaxial stretching, the resulting forces at the clamps are measured. These techniques are compared to the stretching device developed at IKV. This measuring device is integrated into a laboratory thermoforming machine, which allows a close-to-real-process heating, handling and forming of the semi-finished products. After the heating with IR-radiation, force-displacement data is measured during the equibiaxial deformation. This work shows the differences between these methods and emphasises the particular benefits. Further measurement methods, like uniaxial tensile tests and plug deformation, and the effects on the forming simulation will be part of future research.

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2010 CFR

2010-01-01

... as follows: EC16SE91.000 where: A=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A...

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2013 CFR

2013-01-01

... as follows: EC16SE91.000 where: A=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A...

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2011 CFR

2011-01-01

... as follows: EC16SE91.000 where: A=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A...

7 CFR 1710.2 - Definitions and rules of construction.

Code of Federal Regulations, 2012 CFR

2012-01-01

... as follows: EC16SE91.000 where: A=Distribution (plant), which equals Part E, Line 14(e) of RUS Form 7; B=General Plant, which equals Part E, Line 24(e) of RUS Form 7; C=Operating Revenue and Patronage Capital, which equals Part A, Line 1 of RUS Form 7; and D=Cost of Power, which equals the sum of Part A...

16 CFR Appendix B to Part 698 - Model Forms for Risk-Based Pricing and Credit Score Disclosure Exception Notices

Code of Federal Regulations, 2014 CFR

2014-01-01

... Credit Score Disclosure Exception Notices B Appendix B to Part 698 Commercial Practices FEDERAL TRADE COMMISSION THE FAIR CREDIT REPORTING ACT MODEL FORMS AND DISCLOSURES Pt. 698, App. B Appendix B to Part 698... set of circumstances as indicated by the title of that model form. 2. Model form B-1 is for use in...

A microstructure-based yield stress and work-hardening model for textured 6xxx aluminium alloys

NASA Astrophysics Data System (ADS)

Khadyko, M.; Myhr, O. R.; Dumoulin, S.; Hopperstad, O. S.

2016-04-01

The plastic properties of an aluminium alloy are defined by its microstructure. The most important factors are the presence of alloying elements in the form of solid solution and precipitates of various sizes, and the crystallographic texture. A nanoscale model that predicts the work-hardening curves of 6xxx aluminium alloys was proposed by Myhr et al. The model predicts the solid solution concentration and the particle size distributions of different types of metastable precipitates from the chemical composition and thermal history of the alloy. The yield stress and the work hardening of the alloy are then determined from dislocation mechanics. The model was largely used for non-textured materials in previous studies. In this work, a crystal plasticity-based approach is proposed for the work hardening part of the nanoscale model, which allows including the influence of the crystallographic texture. The model is evaluated by comparison with experimental data from uniaxial tensile tests on two textured 6xxx alloys in five temper conditions.

Stamp forming optimization for formability and crystallinity

NASA Astrophysics Data System (ADS)

Donderwinkel, T. G.; Rietman, B.; Haanappel, S. P.; Akkerman, R.

2016-10-01

The stamp forming process is well suited for high volume production of thermoplastic composite parts. The process can be characterized as highly non-isothermal as it involves local quench-cooling of a molten thermoplastic composite blank where it makes contact with colder tooling. The formability of the thermoplastic composite depends on the viscoelastic material behavior of the matrix material, which is sensitive to temperature and degree of crystallinity. An experimental study was performed to determine the effect of temperature and crystallinity on the storage modulus during cooling for a woven glass fiber polyamide-6 composite material. An increase of two decades in modulus was observed during crystallization. As this will significantly impede the blank formability, the onset of crystallization effectively governs the time available for forming. Besides the experimental work, a numerical model is developed to study the temperature and crystallinity throughout the stamp forming process. A process window can be determined by feeding the model with the experimentally obtained data on crystallization.

The Bat'a Company in Zlín: A Shoe Company or a School Company?

ERIC Educational Resources Information Center

Kasper, Tomáš; Kasperová, Dana

2018-01-01

The first part of the study focuses on the characteristics and analysis of Zlín as an example of a company town. Life in the company town is characterised as a means of forming 'a new man' in Bat'a's Zlín. The second section analyses the aims of worker education in Bat'a's Zlín (in the so-called Bat'a school of work) and highlights the methods and…

FY16-20 Strategic Plan.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harwell, Amber Suzanne

2015-07-01

Welcome to our FY16–FY20 Strategic Plan, which both refects our continued dedication to the work we do and reinforces the importance of the integrated Laboratories’ strategic framework to our future. This document is the result of the leadership team’s journey over the past few years in response to the needs of our nation. In an external environment that continues to change, sometimes in unexpected ways, it is critical that our mission areas and our foundation become increasingly synergistic, forming a whole whose parts are interdependent.

GRIP Experiment 2010

NASA Image and Video Library

2010-08-15

Susan Kool, a researcher from the Langley Research Center, works on monitoring the Lidar Atmospheric Sensing Experiment (LASE) aboard the NASA DC-8 aircraft, Monday, Aug. 16, 2010, at Fort Lauderdale Hollywood International Airport in Fort Lauderdale, Fla. LASE probes the atmosphere using lasers and is part of the Genesis and Rapid Intensification Processes (GRIP) experiment is a NASA Earth science field experiment in 2010 that is being conducted to better understand how tropical storms form and develop into major hurricanes. Photo Credit: (NASA/Paul E. Alers)

The Majorana Project

ScienceCinema

Orrell, John; Hoppe, Eric

2018-01-26

Working as part of a collaborative team, PNNL is bringing its signature capability in ultra-low-level detection to help search for a rare form of radioactive decay-never before detected-called "neutrinoless double beta decay" in germanium. If observed, it would demonstrate neutrinos are Majorana-type particles. This discovery would show neutrinos are unique among fundamental particles, having a property whereby the matter and anti-matter version of this particle are indistinguishable. Physicist John L. Orrell explains how they rely on the Shallow Underground Laboratory to conduct the research.

Late effects of air pollution with special reference to lung cancer.

PubMed Central

Friberg, L; Cederlöf, R

1978-01-01

The Department of Environmental Hygiene of the National Swedish Environment Protection Board and of the Karolinska Institute have prepared an extensive review on health effects of air pollution, to be used by the Swedish Parliamentary Committee on Energy and the Environment. This report forms the basis for one part of the review, that on late effects. Much of the work on the review, is the result of a team effort involving researchers from numerous organizations. PMID:348461

Creep and Fatigue Interaction in the PWA 1484 Single Crystal Nickel-Base Alloy (Preprint)

DTIC Science & Technology

2011-07-01

work by Zhang et al . has shown that during the early part of fatigue cycling dislocations are formed primarily in the γ matrix with the number of...dislocations increasing with the number of applied cycles [11]. Ott and Mughrabi showed that during fatigue of single crystal nickel base superalloys... al . and their research determined that the fatigue behavior of PWA1484 could be well represented by a Walker type fatigue model that also included

Survey-Guided Development: Data Based Organizational Change

DTIC Science & Technology

1975-06-01

are largely environmentally determined, these experiences ":npact," and as they do so, move from the II 28 more existential surface level to the more...8217 personal values with those humanistic values which he believes are held by top managers today--form the major basis, in Bennis’ view, for the change...as "society." If they are, it is because we adhere to a set of humanistic values and define society’s "work" at least in part in these terms. It is

Factors of collaborative working: a framework for a collaboration model.

PubMed

Patel, Harshada; Pettitt, Michael; Wilson, John R

2012-01-01

The ability of organisations to support collaborative working environments is of increasing importance as they move towards more distributed ways of working. Despite the attention collaboration has received from a number of disparate fields, there is a lack of a unified understanding of the component factors of collaboration. As part of our work on a European Integrated Project, CoSpaces, collaboration and collaborative working and the factors which define it were examined through the literature and new empirical work with a number of partner user companies in the aerospace, automotive and construction sectors. This was to support development of a descriptive human factors model of collaboration - the CoSpaces Collaborative Working Model (CCWM). We identified seven main categories of factors involved in collaboration: Context, Support, Tasks, Interaction Processes, Teams, Individuals, and Overarching Factors, and summarised these in a framework which forms a basis for the model. We discuss supporting evidence for the factors which emerged from our fieldwork with user partners, and use of the model in activities such as collaboration readiness profiling. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

49 CFR Appendix B to Part 1155 - Form Federal Register Notice

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 8 2014-10-01 2014-10-01 false Form Federal Register Notice B Appendix B to Part 1155 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION.... B Appendix B to Part 1155—Form Federal Register Notice Docket No. FD __ (Sub-No. __) Notice of...

49 CFR Appendix C to Part 580 - Separate Disclosure Form

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Separate Disclosure Form C Appendix C to Part 580... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ODOMETER DISCLOSURE REQUIREMENTS Pt. 580, App. C Appendix C to Part 580—Separate Disclosure Form Odometer Disclosure Statement Federal law (and State law...

System and method for 3D printing of aerogels

DOEpatents

Worsley, Marcus A.; Duoss, Eric; Kuntz, Joshua; Spadaccini, Christopher; Zhu, Cheng

2016-03-08

A method of forming an aerogel. The method may involve providing a graphene oxide powder and mixing the graphene oxide powder with a solution to form an ink. A 3D printing technique may be used to write the ink into a catalytic solution that is contained in a fluid containment member to form a wet part. The wet part may then be cured in a sealed container for a predetermined period of time at a predetermined temperature. The cured wet part may then be dried to form a finished aerogel part.

Overview of landslide problems, research, and mitigation, Cincinnati, Ohio, area

USGS Publications Warehouse

Baum, Rex L.; Johnson, Arvid M.

1996-01-01

Landslides cause much damage to property throughout the metropolitan area of Cincinnati, Ohio. Most landslides occur in unconsolidated deposits, including colluvium, till, glacial lake clays, and man-made fill derived from colluvium and glacial deposits. Landslides in thin colluvium are widespread on steeper slopes that wall the valleys of the Ohio River and its tributaries. Abundant landslides also form in thick colluvium on flatter slopes, especially where the colluvium has been disturbed by earthwork. Unusual block glides and block-extrusion glides form where till rests on lake clay. Through the years, knowledge of the distribution and causes of landslides has increased as a result of many investigations. This knowledge became part of the basis for landslide mitigation programs adopted by the City of Cincinnati and Hamilton County, Ohio. In 1974 the Cincinnati City Council passed an excavation and fill ordinance to help reduce landslide damage in areas of new construction. In 1989 following much additional study, Cincinnati created a geotechnical office within its Department of Public Works. The office, which is staffed by a geotechnical engineer, an engineering geologist, and two technicians, carries out a mitigation program. Since 1989, members of the geotechnical staff have worked in several ways to reduce landslide damage in the city; their work includes engineering-geologic mapping of selected parts of the city, inspection of retaining walls that impact public right-of-way, review of proposed construction in hillside areas, inspecting and arranging for repair of landslide areas that affect city property, and compiling geologic and geotechnical data on landslide areas within the city. In 1990, Hamilton County also adopted an excavation and fill ordinance to help reduce the damage due to landslides in areas of new construction.

Bitter-type toroidal field magnet for zephyr

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nathrath, N.; Keinath, W.; Kobusch, W.

1981-09-01

A feasibility study concerning stress computations, design and material technology of a Bitter-type magnet for the ZEPHYR project conducted in West Germany is reported. The big overall dimensions of the magnet (6.50 m diam 2.80 m high), access for diagnostics and neutral injection (16 ports), the possibility of remote handling of activated parts and high forces form the main requirements for design and material. A design with 16 identical modules (coils) was chosen, each coil consisting of 16 Bitter plates, plate housings and one diagnostic/neutral injection wedge. The structural parts are connected by bolts and form the bending stiff structuremore » of the magnet. The most critical area of the magnet is the inner wedge-shaped part of the coils (''throat area'') with extremely high tension, compression and shear stress values, to which temperature effects contribute heavily. Steel-copper compounds are found to be the best Bitter-plate materials. Copper-plating austenitic steel can be done galvanically or by explosive techniques. Cold-worked austenitic steels fulfil the requirements in the throat, in the flat-plate region milder steels can be used. Different plate concepts are being considered. Plasma-sprayed Al/sub 2/O/sub 3//TiO/sub 2/ and reinforced epoxy layers are provided as insulating materials in different magnet areas.« less

Women's work and development in Latin America.

PubMed

Draper, E

1985-01-01

The discussion explores the problem of women's employment patterns under capitalist development in Latin America, first by analyzing the way in which women's work has been conceptualized within modernization theory. It then goes on to examine the 2 types of work in which most Latin American women are engaged -- domestic service and informal work such as selling produce and taking in laundry -- to provide evidence for challenging modernization theory and for developing a more useful approach. Subsequently, the discussion considers women's domestic and informal work within the context of capitalist development, which provides some insight into the broader structures shaping women's employment. Finally, the discussion proposes some reconceptualizations of women's work and development. Modernization theorists analyze women's work in the cities within a variety of constructs, interpreting it as a backward manifestation of traditional society, a reflection of women's inadequate training for the modern sector, an indication of women's primary orientation to the family, or as a phenomenon that is too tangential to warrant examination. The primary assumption is that modernization improves women's status and the conditions of their lives as it brings greater productivity, more advanced technology, and more highly differentiated institutions. Assumptions concerning women's absorption into the modern sector and the equalization of work roles between men and women are not borne out by actual employment trends, which reveal the persistent concentration of women in domestic work, informal jobs, and the lower-paying service jobs. Despite their predominance, domestic service and informal jobs are infrequently included in employment statistics and are virtually ignored in studies of development, yet these 2 types of work are the primary forms of work for Latin American women. Even when modernization theorists recognize the proliferation of informal and domestic service jobs, they see it as part of a progressive development stage, with displaced rural laborers becoming incorporated into the modern sector by way of informal jobs. In most Latin American countries, rural women become a permanent part of the services and the informal labor market when they move to the cities. There is little sign of their transition to industrial employment. In general, capitalist development marginalizes Latin American women, who in several important ways lose status. The range of pursuits considered women's work should include their activities within the infromal labor sector. Informal work is still virtually unexplored, especially as it relates to wage work in underdeveloped countries. Informal labor is not registered in the census, nor is it included in the gross national product. Yet, it is a major component of women's work. Domestic service and infromal jobs should be seen in relation to other forms of labor and to total social production.

Tandem SAM Domain Structure of Human Caskin1: A Presynaptic, Self-Assembling Scaffold for CASK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stafford, Ryan L.; Hinde, Elizabeth; Knight, Mary Jane

2012-02-07

The synaptic scaffolding proteins CASK and Caskin1 are part of the fibrous mesh of proteins that organize the active zones of neural synapses. CASK binds to a region of Caskin1 called the CASK interaction domain (CID). Adjacent to the CID, Caskin1 contains two tandem sterile a motif (SAM) domains. Many SAM domains form polymers so they are good candidates for forming the fibrous structures seen in the active zone. We show here that the SAM domains of Caskin1 form a new type of SAM helical polymer. The Caskin1 polymer interface exhibits a remarkable segregation of charged residues, resulting in amore » high sensitivity to ionic strength in vitro. The Caskin1 polymers can be decorated with CASK proteins, illustrating how these proteins may work together to organize the cytomatrix in active zones.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Til, J.

This book represents an extension of several earlier works on spatial form by Van Til, an urban sociologist who describes himself as a guarded pessimist about the future. He examines the spatial ramifications on urban, suburban, and rural use of space brought about by changes in the availability of amount and types of energy resources. In the first three chapters, he explores these ideas by structuring the future in terms of four institutional sectors: economy (inflation, unemployment, corporate control, and distribution of wealth); culture (values, demography and life style, information revolution); polity (governance and empowerment); and voluntary action. The secondmore » part of the book explicitly considers geographic space, with a chapter devoted to describing urban, suburban, and nonmetropolitan spatial forms, and one to changes anticipated in these forms given the three future scenarios. This balanced presentation discusses both those who advocate reliance on technological development as well as those who prefer other solutions.« less

Retrogressive development: transcendental anatomy and teratology in nineteenth-century Britain.

PubMed

Bates, Alan W H

2014-01-01

In 1855 the leading British transcendental anatomist Robert Knox proposed a theory of retrogressive development according to which the human embryo could give rise to ancestral types or races and the animal embryo to other species within the same family. Unlike monsters attributed to the older theory of arrested development, new forms produced by retrogression were neither imperfect nor equivalent to a stage in the embryo's development. Instead, Knox postulated that embryos contained all possible specific forms in potentia. Retrogressive development could account for examples of atavism or racial throwbacks, and formed part of Knox's theory of rapid (saltatory) species change. Knox's evolutionary theorizing was soon eclipsed by the better presented and more socially acceptable Darwinian gradualism, but the concept of retrogressive development remained influential in anthropology and the social sciences, and Knox's work can be seen as the scientific basis for theories of physical, mental and cultural degeneracy.

"The Day All of the Different Parts of Me Can Come Along": Intersectionality and U.S. Third World Feminism in the Poetry of Pat Parker and Willyce Kim.

PubMed

Van Ausdall, Mimi Iimuro

2015-01-01

This article brings to light the poetry of Pat Parker and Willyce Kim, two key figures within the 1970s and '80s women in print movement. While Parker and Kim have been rightly placed within African-American and Asian-American histories, respectively, and working-class and lesbian-feminist literary histories, their work is most fully understood within the context of U.S. Third World Feminism. Through close readings of poetic form and content in addition to engagement with current debates about intersectionality as a methodology, the article links Kim and Parker's works to central contributions of U.S. Third World Feminism such as intersectionality and power across and within difference that continue to influence feminist theory today.

Surface inspection system for carriage parts

NASA Astrophysics Data System (ADS)

Denkena, Berend; Acker, Wolfram

2006-04-01

Quality standards are very high in carriage manufacturing, due to the fact, that the visual quality impression is highly relevant for the purchase decision for the customer. In carriage parts even very small dents can be visible on the varnished and polished surface by observing reflections. The industrial demands are to detect these form errors on the unvarnished part. In order to meet the requirements, a stripe projection system for automatic recognition of waviness and form errors is introduced1. It bases on a modified stripe projection method using a high resolution line scan camera. Particular emphasis is put on achieving a short measuring time and a high resolution in depth, aiming at a reliable automatic recognition of dents and waviness of 10 μm on large curved surfaces of approximately 1 m width. The resulting point cloud needs to be filtered in order to detect dents. Therefore a spatial filtering technique is used. This works well on smoothly curved surfaces, if frequency parameters are well defined. On more complex parts like mudguards the method is restricted by the fact that frequencies near the define dent frequencies occur within the surface as well. To allow analysis of complex parts, the system is currently extended by including 3D CAD models into the process of inspection. For smoothly curved surfaces, the measuring speed of the prototype is mainly limited by the amount of light produced by the stripe projector. For complex surfaces the measuring speed is limited by the time consuming matching process. Currently, the development focuses on the improvement of the measuring speed.

Francis Bacon's natural history and the Senecan natural histories of early modern Europe.

PubMed

Jalobeanu, Dana

2012-01-01

At various stages in his career, Francis Bacon claimed to have reformed and changed traditional natural history in such a way that his new "natural and experimental history" was unlike any of its ancient or humanist predecessors. Surprisingly, such claims have gone largely unquestioned in Baconian scholarship. Contextual readings of Bacon's natural history have compared it, so far, only with Plinian or humanist natural history. This paper investigates a different form of natural history, very popular among Bacon's contemporaries, but yet unexplored by contemporary students of Bacon's works. I have provisionally called this form of natural history'Senecan' natural history, partly because it took shape in the Neo-Stoic revival of the sixteenth-century, partly because it originates in a particular cosmographical reading of Seneca's Naturales quaestiones. I discuss in this paper two examples of Senecan natural history: the encyclopedic and cosmographical projects of Pierre de la Primaudaye (1546-1619) and Samuel Purchas (1577-1626). I highlight a number of similarities between these two projects and Francis Bacon's natural history, and argue that Senecan natural history forms an important aspect in the historical and philosophical background that needs to be taken into consideration if we want to understand the extent to which Bacon's project to reform natural history can be said to be new.

12 CFR Appendix C to Part 571 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 6 2014-01-01 2012-01-01 true Model Forms for Opt-Out Notices C Appendix C to... REPORTING Pt. 571, App. C Appendix C to Part 571—Model Forms for Opt-Out Notices a. Although use of the... comply with § 571.23(a)(2) of this part. C-1Model Form for Initial Opt-out Notice (Single-Affiliate...

12 CFR Appendix C to Part 571 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 5 2011-01-01 2011-01-01 false Model Forms for Opt-Out Notices C Appendix C to... REPORTING Pt. 571, App. C Appendix C to Part 571—Model Forms for Opt-Out Notices a. Although use of the... comply with § 571.23(a)(2) of this part. C-1Model Form for Initial Opt-out Notice (Single-Affiliate...

12 CFR Appendix C to Part 717 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Model Forms for Opt-Out Notices C Appendix C to... FAIR CREDIT REPORTING Pt. 717, App. C Appendix C to Part 717—Model Forms for Opt-Out Notices a... the treatment of opt-outs by joint consumers to comply with § 717.23(a)(2) of this part. C-1Model Form...

12 CFR Appendix C to Part 571 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 6 2013-01-01 2012-01-01 true Model Forms for Opt-Out Notices C Appendix C to... REPORTING Pt. 571, App. C Appendix C to Part 571—Model Forms for Opt-Out Notices a. Although use of the... comply with § 571.23(a)(2) of this part. C-1Model Form for Initial Opt-out Notice (Single-Affiliate...

12 CFR Appendix C to Part 41 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Model Forms for Opt-Out Notices C Appendix C to... Pt. 41, App. C Appendix C to Part 41—Model Forms for Opt-Out Notices a. Although use of the model... comply with § 41.23(a)(2) of this part. C-1 Model Form for Initial Opt-out Notice (Single-Affiliate...

12 CFR Appendix C to Part 222 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Model Forms for Opt-Out Notices C Appendix C to... SYSTEM FAIR CREDIT REPORTING (REGULATION V) Pt. 222, App. C Appendix C to Part 222—Model Forms for Opt... of opt-outs by joint consumers to comply with § 222.23(a)(2) of this part. C-1Model Form for Initial...

12 CFR Appendix C to Part 717 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Model Forms for Opt-Out Notices C Appendix C to... FAIR CREDIT REPORTING Pt. 717, App. C Appendix C to Part 717—Model Forms for Opt-Out Notices a... the treatment of opt-outs by joint consumers to comply with § 717.23(a)(2) of this part. C-1Model Form...

12 CFR Appendix C to Part 41 - Model Forms for Opt-Out Notices

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Model Forms for Opt-Out Notices C Appendix C to... Pt. 41, App. C Appendix C to Part 41—Model Forms for Opt-Out Notices a. Although use of the model... comply with § 41.23(a)(2) of this part. C-1 Model Form for Initial Opt-out Notice (Single-Affiliate...

27 CFR 46.22 - Forms prescribed.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CIGARETTE PAPERS AND TUBES Administrative Provisions § 46.22 Forms prescribed. (a) The appropriate TTB officer is authorized to prescribe all forms required by this part. You must furnish all of the..., and as required by this part. You must file each form in accordance with its instructions. (b) Forms...

17 CFR Appendix to Part 48 - Form FBOT

Code of Federal Regulations, 2014 CFR

2014-04-01

... BOARDS OF TRADE Pt. 48, App. Appendix to Part 48—Form FBOT COMMODITY FUTURES TRADING COMMISSION FORM FBOT FOREIGN BOARD OF TRADE APPLICATION FOR REGISTRATION (IN ORDER TO PERMIT DIRECT ACCESS TO MEMBERS AND OTHER... foreign board of trade applying for registration pursuant to CEA section 4(b) and part 48 of the...

49 CFR Appendix B to Part 24 - Statistical Report Form

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Statistical Report Form B Appendix B to Part 24... ACQUISITION FOR FEDERAL AND FEDERALLY-ASSISTED PROGRAMS Pt. 24, App. B Appendix B to Part 24—Statistical Report Form This Appendix sets forth the statistical information collected from Agencies in accordance...

Astronaut Prepares for Mission With Virtual Reality Hardware

NASA Technical Reports Server (NTRS)

2001-01-01

Astronaut John M. Grunsfeld, STS-109 payload commander, uses virtual reality hardware at Johnson Space Center to rehearse some of his duties prior to the STS-109 mission. The most familiar form of virtual reality technology is some form of headpiece, which fits over your eyes and displays a three dimensional computerized image of another place. Turn your head left and right, and you see what would be to your sides; turn around, and you see what might be sneaking up on you. An important part of the technology is some type of data glove that you use to propel yourself through the virtual world. This technology allows NASA astronauts to practice International Space Station work missions in advance. Currently, the medical community is using the new technologies in four major ways: To see parts of the body more accurately, for study, to make better diagnosis of disease and to plan surgery in more detail; to obtain a more accurate picture of a procedure during surgery; to perform more types of surgery with the most noninvasive, accurate methods possible; and to model interactions among molecules at a molecular level.

Torque Limit for Bolted Joint For Composites. Part B; Experimentation

NASA Technical Reports Server (NTRS)

Kostreva, Kristian M.

2003-01-01

Today, aerospace quality composite parts are generally made from either a unidirectional tape or a fabric prepreg form depending on the application. The matrix material, typically epoxy because of it dimensional stability, is pre-impregnated onto the fibers to ensure uniform distribution. Both of these composite forms are finding themselves used in applications where a joint is required. Two widely used joint methods are the classic mechanically fastened joint, and the contemporary bonded joint; however, the mechanically fastened joint is most commonly used by design engineers. A major portion of the research up-to-date about bolted composite joints has dealt with the inplane static load capacity. This work has helped to spawn standards dealing with filled-hole static joint strength. Other research has clearly shown that the clamp-up load in the mechanical fastener significantly affects the joint strength in a beneficial manner by reducing the bearing strength dependence of the composite laminate. One author reported a maximum increase in joint strength of 28%. This finding has helped to improve the reliability and efficiency of the joint in a composite structure.

Light aircraft lift, drag, and moment prediction: A review and analysis

NASA Technical Reports Server (NTRS)

Smetana, F. O.; Summey, D. C.; Smith, N. S.; Carden, R. K.

1975-01-01

The historical development of analytical methods for predicting the lift, drag, and pitching moment of complete light aircraft configurations in cruising flight is reviewed. Theoretical methods, based in part on techniques described in the literature and in part on original work, are developed. These methods form the basis for understanding the computer programs given to: (1) compute the lift, drag, and moment of conventional airfoils, (2) extend these two-dimensional characteristics to three dimensions for moderate-to-high aspect ratio unswept wings, (3) plot complete configurations, (4) convert the fuselage geometric data to the correct input format, (5) compute the fuselage lift and drag, (6) compute the lift and moment of symmetrical airfoils to M = 1.0 by a simplified semi-empirical procedure, and (7) compute, in closed form, the pressure distribution over a prolate spheroid at alpha = 0. Comparisons of the predictions with experiment indicate excellent lift and drag agreement for conventional airfoils and wings. Limited comparisons of body-alone drag characteristics yield reasonable agreement. Also included are discussions for interference effects and techniques for summing the results above to obtain predictions for complete configurations.

Self-accommodation of B19' martensite in Ti-Ni shape memory alloys. Part III. Analysis of habit plane variant clusters by the geometrically nonlinear theory

NASA Astrophysics Data System (ADS)

Inamura, T.; Nishiura, T.; Kawano, H.; Hosoda, H.; Nishida, M.

2012-06-01

Competition between the invariant plane (IP) condition at the habit plane, the twin orientation relation (OR) and the kinematic compatibility (KC) at the junction plane (JP) of self-accommodated B19‧ martensite in Ti-Ni was investigated via the geometrically nonlinear theory to understand the habit plane variant (HPV) clusters presented in Parts I and II of this work. As the IP condition cannot be satisfied simultaneously with KC, an additional rotation Q is necessary to form compatible JPs for all HPV pairs. The rotation J necessary to form the exact twin OR between the major correspondence variants (CVs) in each HPV was also examined. The observed HPV cluster was not the cluster with the smallest Q but the one satisfying Q = J with a { ? 1}B19‧ type I twin at JP. Both Q and J are crucial to understanding the various HPV clusters in realistic transformations. Finally, a scheme for the ideal HPV cluster composed of six HPVs is also proposed.

Internal medicine specialists' attitudes towards working part-time: a comparison between 1996 and 2004

PubMed Central

Lugtenberg, Marjolein; Heiligers, Phil JM; de Jong, Judith D; Hingstman, Lammert

2006-01-01

Background Although medical specialists traditionally hold negative views towards working part-time, the practice of medicine has evolved. Given the trend towards more part-time work and that there is no evidence that it compromises the quality of care, attitudes towards part-time work may have changed as well in recent years. The aim of this paper was to examine the possible changes in attitudes towards part-time work among specialists in internal medicine between 1996 and 2004. Moreover, we wanted to determine whether these attitudes were associated with individual characteristics (age, gender, investments in work) and whether attitudes of specialists within a partnership showed more resemblance than specialists' attitudes from different partnerships. Methods Two samples were used in this study: data of a survey conducted in 1996 and in 2004. After selecting internal medicine specialists working in general hospitals in The Netherlands, the sample consisted of 219 specialists in 1996 and 363 specialists in 2004. They were sent a questionnaire, including topics on the attitudes towards part-time work. Results Internal medicine specialists' attitudes towards working part-time became slightly more positive between 1996 and 2004. Full-time working specialists in 2004 still expressed concerns regarding the investments of part-timers in overhead tasks, the flexibility of task division, efficiency, communication and continuity of care. In 1996 gender was the only predictor of the attitude, in 2004 being a full- or a part-timer, age and the time invested in work were associated with this attitude. Furthermore, specialists' attitudes were not found to cluster much within partnerships. Conclusion In spite of the increasing number of specialists working or preferring to work part-time, part-time practice among internal medicine specialists seems not to be fully accepted. The results indicate that the attitudes are no longer gender based, but are associated with age and work aspects such as the number of hours worked. Though there is little evidence to support them, negative ideas about the consequences of part-time work for the quality of care still exist. Policy should be aimed at removing the organisational difficulties related to part-time work and create a system in which part-time practice is fully integrated and accepted. PMID:17026741

Process development and tooling design for intrinsic hybrid composites

NASA Astrophysics Data System (ADS)

Riemer, M.; Müller, R.; Drossel, W. G.; Landgrebe, D.

2017-09-01

Hybrid parts, which combine the advantages of different material classes, are moving into the focus of lightweight applications. This development is amplified by their high potential for usage in the field of crash relevant structures. By the current state of the art, hybrid parts are mainly made in separate, subsequent forming and joining processes. By using the concept of an intrinsic hybrid, the shaping of the part and the joining of the different materials are performed in a single process step for shortening the overall processing time and thereby the manufacturing costs. The investigated hybrid part is made from continuous fibre reinforced plastic (FRP), in which a metallic reinforcement structure is integrated. The connection between these layered components is realized by a combination of adhesive bonding and a geometrical form fit. The form fit elements are intrinsically generated during the forming process. This contribution regards the development of the forming process and the design of the forming tool for the single step production of a hybrid part. To this end a forming tool, which combines the thermo-forming and the metal forming process, is developed. The main challenge by designing the tool is the temperature management of the tool elements for the variothermal forming process. The process parameters are determined in basic tests and finite element (FE) simulation studies. On the basis of these investigations a control concept for the steering of the motion axes and the tool temperature is developed. Forming tests are carried out with the developed tool and the manufactured parts are analysed by computer assisted tomography (CT) scans.

32 CFR Appendix A to Part 45 - DD Form 214

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 214 A Appendix A to Part 45 National... CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. A Appendix A to Part 45—DD Form 214 EC23OC91.003 EC23OC91.004 EC23OC91.005 EC23OC91.006 [54 FR 9985, Mar. 9, 1989] ...

Quencher-free fluorescence strategy for detection of DNA methyltransferase activity based on exonuclease III-assisted signal amplification.

PubMed

Liu, Haisheng; Ma, Changbei; Zhou, Meijuan; Chen, Hanchun; He, Hailun; Wang, Kemin

2016-11-01

This work demonstrates a novel method for DNA methyltransferase (MTase) activity detection with a quencher-free molecular beacon (MB) probe based on exonuclease (Exo) III-assisted signal amplification. In the presence of Dam MTase and DpnI endonuclease, the elaborately designed hairpin substrate (MB1) was cleaved into two parts (part A and part B). Exo III can then digest part A and release a single-stranded target of the 2-aminopurine-labeled MB (MB2). Subsequently, the MB2 can hybridize with its target to form a double-stranded structure with a protruding 3'-terminus and then trigger the digestion of MB2 by Exo III. During the digestion of MB2, the 2-aminopurine is separated from the DNA strands and released free in solution, inducing an increase of the fluorescent signal. Owing to the presence of a recessed 3'-terminus in the formed double-stranded DNA, Exo III-assisted recyclable cleavage of MB2 was achieved. Therefore, an amplified fluorescence signal was observed. Under the optimized conditions, Dam MTase can be detected in the range of 0.2-40 units/mL with a limit of detection of 0.2 units/mL and good selectivity. Furthermore, the present assay can be used for screening potential DNA MTase inhibitors. Graphical Abstract A quencher-free fluorescence assay for sensitive detection of DNA methyltransferase activity based on exonuclease III-assisted signal amplification is reported.

Teleology and its constitutive role for biology as the science of organized systems in nature.

PubMed

Toepfer, Georg

2012-03-01

'Nothing in biology makes sense, except in the light of teleology'. This could be the first sentence in a textbook about the methodology of biology. The fundamental concepts in biology, e.g. 'organism' and 'ecosystem', are only intelligible given a teleological framework. Since early modern times, teleology has often been considered methodologically unscientific. With the acceptance of evolutionary theory, one popular strategy for accommodating teleological reasoning was to explain it by reference to selection in the past: functions were reconstructed as 'selected effects'. But the theory of evolution obviously presupposes the existence of organisms as organized and regulated, i.e. functional systems. Therefore, evolutionary theory cannot provide the foundation for teleology. The underlying reason for the central methodological role of teleology in biology is not its potential to offer particular forms of (evolutionary) explanations for the presence of parts, but rather an ontological one: organisms and other basic biological entities do not exist as physical bodies do, as amounts of matter with a definite form. Rather, they are dynamic systems in stable equilibrium; despite changes of their matter and form (in metabolism and metamorphosis) they maintain their identity. What remains constant in these kinds of systems is their 'organization', i.e. the causal pattern of interdependence of parts with certain effects of each part being relevant for the working of the system. Teleological analysis consists in the identification of these system-relevant effects and at the same time of the system as a whole. Therefore, the identity of biological systems cannot be specified without teleological reasoning. Copyright © 2011 Elsevier Ltd. All rights reserved.

Virtual Presence and the Mind's Eye in 3-D Online Communities

NASA Astrophysics Data System (ADS)

Beacham, R. C.; Denard, H.; Baker, D.

2011-09-01

Digital technologies have introduced fundamental changes in the forms, content, and media of communication. Indeed, some have suggested we are in the early stages of a seismic shift comparable to that in antiquity with the transition from a primarily oral culture to one based upon writing. The digital transformation is rapidly displacing the long-standing hegemony of text, and restoring in part social, bodily, oral and spatial elements, but in radically reconfigured forms and formats. Contributing to and drawing upon such changes and possibilities, scholars and those responsible for sites preserving or displaying cultural heritage, have undertaken projects to explore the properties and potential of the online communities enabled by "Virtual Worlds" and related platforms for teaching, collaboration, publication, and new modes of disciplinary research. Others, keenly observing and evaluating such work, are poised to contribute to it. It is crucial that leadership be provided to ensure that serious and sustained investigation be undertaken by scholars who have experience, and achievements, in more traditional forms of research, and who perceive the emerging potential of Virtual World work to advance their investigations. The Virtual Museums Transnational Network will seek to engage such scholars and provide leadership in this emerging and immensely attractive new area of cultural heritage exploration and experience. This presentation reviews examples of the current "state of the art" in heritage based Virtual World initiatives, looking at the new modes of social interaction and experience enabled by such online communities, and some of the achievements and future aspirations of this work.

76 FR 60774 - Discontinuance of Form CO in Registration Practices

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

....e., Form TX for nondramatic literary works, Form PA for works of the performing arts, Form VA for works of visual art, Form SR for sound recordings, and Form SE for serials). Additionally, the proposed...

Chinese Undergraduate Students' Work Values: The Role of Parental Work Experience and Part-Time Work Quality

ERIC Educational Resources Information Center

Cheung, Francis Yue-lok; Tang, Catherine So-kum

2012-01-01

In this study, the authors investigated the association of perceived parental job insecurity and students' part-time work quality on work values among 341 Hong Kong Chinese undergraduate students. Correlation and regression results showed that work values were strongly related to students' part-time work satisfaction and work quality. In…

Brushite foams—the effect of Tween® 80 and Pluronic® F‐127 on foam porosity and mechanical properties

PubMed Central

Montufar, Edgar B.; Engqvist, Håkan; Ginebra, Maria‐Pau; Persson, Cecilia

2016-01-01

Abstract Resorbable calcium phosphate based bone void fillers should work as temporary templates for new bone formation. The incorporation of macropores with sizes of 100 −300 µm has been shown to increase the resorption rate of the implant and speed up bone ingrowth. In this work, macroporous brushite cements were fabricated through foaming of the cement paste, using two different synthetic surfactants, Tween® 80 and Pluronic® F‐127. The macropores formed in the Pluronic samples were both smaller and less homogeneously distributed compared with the pores formed in the Tween samples. The porosity and compressive strength (CS) were comparable to previously developed hydroxyapatite foams. The cement foam containing Tween, 0.5M citric acid in the liquid, 1 mass% of disodium dihydrogen pyrophosphate mixed in the powder and a liquid to powder ratio of 0.43 mL/g, showed the highest porosity values (76% total and 56% macroporosity), while the CS was >1 MPa, that is, the hardened cement could be handled without rupture of the foamed structure. The investigated brushite foams show potential for future clinical use, both as bone void fillers and as scaffolds for in vitro bone regeneration. © 2015 The Authors. Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 67–77, 2016. PMID:25615405

Hot working behavior of selective laser melted and laser metal deposited Inconel 718

NASA Astrophysics Data System (ADS)

Bambach, Markus; Sizova, Irina

2018-05-01

The production of Nickel-based high-temperature components is of great importance for the transport and energy sector. Forging of high-temperature alloys often requires expensive dies, multiple forming steps and leads to forged parts with tolerances that require machining to create the final shape and a large amount of scrap. Additive manufacturing offers the possibility to print the desired shapes directly as net-shape components, requiring only little additional effort in machining. Especially for high-temperature alloys carrying a large amount of energy per unit mass, additive manufacturing could be more energy-efficient than forging if the energy contained in the machining scrap exceeds the energy needed for powder production and laser processing. However, the microstructure and performance of 3d-printed parts will not reach the level of forged material unless further expensive processes such as hot-isostatic pressing are used. Using the design freedom and possibilities to locally engineer material, additive manufacturing could be combined with forging operations to novel process chains, offering the possibility to reduce the number of forging steps and to create near-net shape forgings with desired local properties. Some innovative process chains combining additive manufacturing and forging have been patented recently, but almost no scientific knowledge on the workability of 3D printed preforms exists. The present study investigates the flow stress and microstructure evolution during hot working of pre-forms produced by laser powder deposition and selective laser melting (Figure 1) and puts forward a model for the flow stress.

Structural violence in long-term, residential care for older people: Comparing Canada and Scandinavia

PubMed Central

Banerjee, Albert; Daly, Tamara; Armstrong, Pat; Szebehely, Marta; Armstrong, Hugh; LaFrance, Stirling

2014-01-01

Canadian frontline careworkers are six times more likely to experience daily physical violence than their Scandinavian counterparts. This paper draws on a comparative survey of residential careworkers serving older people across three Canadian provinces (Manitoba, Nova Scotia, Ontario) and four countries that follow a Scandinavian model of social care (Denmark, Finland, Norway, Sweden) conducted between 2005 and 2006. Ninety percent of Canadian frontline careworkers experienced physical violence from residents or their relatives and 43 percent reported physical violence on a daily basis. Canadian focus groups conducted in 2007 reveal violence was often normalized as an inevitable part of elder-care. We use the concept of “structural violence” (Galtung, 1969) to raise questions about the role that systemic and organizational factors play in setting the context for violence. Structural violence refers to indirect forms of violence that are built into social structures and that prevent people from meeting their basic needs or fulfilling their potential. We applied the concept to long-term residential care and found that the poor quality of the working conditions and inadequate levels of support experienced by Canadian careworkers constitute a form of structural violence. Working conditions are detrimental to careworker’s physical and mental health, and prevent careworkers from providing the quality of care they are capable of providing and understand to be part of their job. These conditions may also contribute to the violence workers experience, and further investigation is warranted. PMID:22204839

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

32 CFR Appendix A to Part 77 - DD Form 2580, Operation Transition Department of Defense

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 1 2014-07-01 2014-07-01 false DD Form 2580, Operation Transition Department of Defense A Appendix A to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2580, Operation Transition Department of Defense Outplacement and Referral System...

6 CFR Appendix B to Part 9 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2010 CFR

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 9 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY RESTRICTIONS UPON LOBBYING Pt. 9, App. B Appendix B to Part 9—Disclosure Form To Report Lobbying ER06MR03.021...

13 CFR Appendix B to Part 146 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 146 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW RESTRICTIONS ON LOBBYING Pt. 146, App. B Appendix B to Part 146—Disclosure Form To Report Lobbying EC08SE91.000...

41 CFR Appendix B to Part 105 - 69-Disclosure Form To Report Lobbying

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false 69-Disclosure Form To Report Lobbying B Appendix B to Part 105 Public Contracts and Property Management Federal Property... Administration 69-NEW RESTRICTIONS ON LOBBYING Pt. 105-69, App. B Appendix B to Part 105-69—Disclosure Form To...

22 CFR Appendix B to Part 712 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 2 2014-04-01 2014-04-01 false Disclosure Form To Report Lobbying B Appendix B to Part 712 Foreign Relations OVERSEAS PRIVATE INVESTMENT CORPORATION ADMINISTRATIVE PROVISIONS NEW RESTRICTIONS ON LOBBYING Pt. 712, App. B Appendix B to Part 712—Disclosure Form To Report Lobbying EC13OC91.006...

40 CFR Appendix B to Part 34 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE NEW RESTRICTIONS ON LOBBYING Pt. 34, App. B Appendix B to Part 34—Disclosure Form To Report...

45 CFR Appendix B to Part 604 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 3 2014-10-01 2014-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 604 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION NEW RESTRICTIONS ON LOBBYING Pt. 604, App. B Appendix B to Part 604—Disclosure Form To Report Lobbying...

12 CFR Appendix B to Part 37 - Long Form Disclosures

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Long Form Disclosures B Appendix B to Part 37 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY DEBT CANCELLATION CONTRACTS AND DEBT SUSPENSION AGREEMENTS Pt. 37, App. B Appendix B to Part 37—Long Form Disclosures • This...

13 CFR Appendix B to Part 146 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-01-01

... 13 Business Credit and Assistance 1 2012-01-01 2012-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 146 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW RESTRICTIONS ON LOBBYING Pt. 146, App. B Appendix B to Part 146—Disclosure Form To Report Lobbying EC08SE91.000...

40 CFR Appendix B to Part 34 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE NEW RESTRICTIONS ON LOBBYING Pt. 34, App. B Appendix B to Part 34—Disclosure Form To Report...

43 CFR 428.4 - Who must submit forms under this part.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Who must submit forms under this part. 428.4 Section 428.4 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION... THE ELIGIBILITY OF CERTAIN FORMERLY EXCESS LAND § 428.4 Who must submit forms under this part. (a) You...

32 CFR Appendix C to Part 45 - DD Form 215

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false DD Form 215 C Appendix C to Part 45 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. C Appendix C to Part...

24 CFR Appendix C to Part 3500 - Instructions for Completing Good Faith Estimate (GFE) Form

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Instructions for Completing Good Faith Estimate (GFE) Form C Appendix C to Part 3500 Housing and Urban Development Regulations Relating.... 3500, App. C Appendix C to Part 3500—Instructions for Completing Good Faith Estimate (GFE) Form The...

20 CFR Appendix B to Part 438 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Disclosure Form To Report Lobbying B Appendix B to Part 438 Employees' Benefits SOCIAL SECURITY ADMINISTRATION RESTRICTIONS ON LOBBYING Pt. 438, App. B Appendix B to Part 438—Disclosure Form To Report Lobbying ER27MY03.000 ER27MY03.001 ...

Characterizing Workplace Exposures in Vietnamese Women Working in California Nail Salons

PubMed Central

Gunier, Robert; Tran, Alisha; Von Behren, Julie; Doan-Billings, Phuong-An; Nguyen, Kim-Dung; Okahara, Linda; Lui, Benjamin Yee-Bun; Nguyen, Mychi; Huynh, Jessica; Reynolds, Peggy

2011-01-01

Objectives. We engaged Vietnamese nail salon workers in a community-based participatory research (CBPR) study to measure personal and area concentrations of solvents in their workplace. Methods. We measured average work-shift concentrations of toluene, ethyl acetate, and isopropyl acetate among 80 workers from 20 salons using personal air monitors. We also collected area samples from 3 salons using summa canisters. Results. For personal measurements, the arithmetic mean was 0.53 parts per million (range = 0.02–5.50) for ethyl acetate, 0.04 parts per million (range = 0.02–0.15) for isopropyl acetate, and 0.15 parts per million (range = 0.02–1.0) for toluene. Area measurements were lower in comparison, but we detected notable levels of methyl methacrylate, a compound long banned from nail products. Predictors of solvent levels included different forms of ventilation and whether the salon was located in an enclosed building. Conclusions. Using a CBPR approach that engaged community members in the research process contributed to the successful recruitment of salon workers. Measured levels of toluene, methyl methacrylate, and total volatile organic compounds were higher than recommended guidelines to prevent health symptoms such as headaches, irritations, and breathing problems, which were frequently reported in this workforce. PMID:21551383

Determination on Damage Mechanism of the Planet Gear of Heavy Vehicle Final Drive

NASA Astrophysics Data System (ADS)

Ramdan, RD; Setiawan, R.; Sasmita, F.; Suratman, R.; Taufiqulloh

2018-02-01

The works focus on the investigation of damage mechanism of fractured in the form of spalling of the planet gears from the final drive assembly of 160-ton heavy vehicles. The objective of this work is to clearly understand the mechanism of damage. The work is the first stage of the on-going research on the remaining life estimation of such gears. The understanding of the damage mechanism is critical in order to provide accurate estimate of the gear’s remaining life with observed initial damage. The analysis was performed based on the metallurgy laboratory works, including visual observation, macro-micro fractography by optical stereo and optical microscope and micro-vickers hardness test. From visual observation it was observed pitting that form lining defect at common position, which is at gear flank position. From spalling sample it was observed ratchet mark at the boundary between macro pitting and the edge of fractured parts. Further observation on the cross-section of the samples by optical microscope confirm that initial micro pitting occur without spalling of the case hardened surface. Spalling occur when pitting achieve certain critical size, and occur at multiple initiation site of crack propagation. From the present research it was concluded that pitting was resulted due to repeated contact fatigue. In addition, development of micro to macro pitting as well as spalling occur at certain direction towards the top of the gear teeth.

17 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 248 Forms

Code of Federal Regulations, 2010 CFR

2010-04-01

... A of Part 248 Forms A. Any person may view and print this form at: http://www.sec.gov/about/forms... form, as appropriate. 2. The Contents of the Model Privacy Form The model form consists of two pages, which may be printed on both sides of a single sheet of paper, or may appear on two separate pages...

Topics in Cosmic String Physics and Vacuum Stability of Field Theories

NASA Astrophysics Data System (ADS)

Dasgupta, Indranil

1998-01-01

In this thesis I examine aspects of the vacuum state of quantum field theories. Namely, I study topological defects in the vacuum which appear as localized regions of non-zero energy density if the model system is unable to relax to a homogeneous and isotropic ground state because of topological constraints. I also examine the stability of the so called false vacua in theories that have multiple vacuum states with different energy densities. I first consider topological defects in the form of strings and independently the decay of false vacua in models of particle physics where the presence of either defects or of false vacua leads to interesting phenomenology. Then I describe a situation in which the defects arising from topological properties of the vacuum in turn affect the stability of the vacuum itself. In the first part of this work (chapters 2 and 3), I explore the phenomenology of cosmic strings. I introduce new string-like topological defects that resemble pairs of strings bound together. I give an existence proof of these 'binary strings' and then develop their cosmological properties in detail. I then propose a simple extension of the Standard Model in which cosmic strings may form and then decay through baryon number violating interactions leading to baryogenesis. I show that the model has distinct and testable signatures. In the second part of this work (chapters 4 and 5), I examine the vacua of several proposed models of gauge mediated dynamical supersymmetry breaking and show that the viable vacua are often unstable. I develop a rigorous theory for approximating vacuum tunneling rates in multi-scalar field theories and by computing bounds on the decay rate of the vacua in these models obtain useful constraints on the parameter space. In the final part of this work (chapter 6), I develop a theory of vacuum tunneling induced by topological defects. I show that defects can speed up vacuum tunneling rates by seeding new kinds of bubbles during a first order phase transition. I then indicate possible phenomenological applications of this effect and develop simple approximation techniques for computing the rate of seeded tunneling.

A census study exploring the training needs of nurses working in Kwong Wah Hospital and Wong Tai Sin Hospital in Hong Kong, China.

PubMed

Lai, Yuk-Wah

2013-01-01

As part of the strategic professional development plan for nurses, training needs analysis was conducted from August 2011 to February 2012, in the form of descriptive research with survey design. The aim was to support nursing staff in their professional development needs and promote staff engagement. Consecutive sampling was employed; all full time nurses working in Kwong Wah Hospital (KWH) and Wong Tai Sin Hospital (WTSH) were recruited and invited to complete a self-administered questionnaire. Based on the findings and conclusions, follow up strategies were proposed. Management then built a sustainable learning environment for KWH and WTSH nurses in the 2012-2015 professional development plan.

UAS Integration into the NAS: Detect and Avoid Display Evaluations in Support of SC-228 MOPS Development

NASA Technical Reports Server (NTRS)

Fern, Lisa; Rorie, Conrad; Shively, Jay

2016-01-01

At the May 2015 SC-228 meeting, requirements for TCAS II interoperability became elevated in priority. A TCAS interoperability work group was formed to identify and address key issuesquestions. The TCAS work group came up with an initial list of questions and a plan to address those questions. As part of that plan, NASA proposed to run a mini HITL to address display, alerting and guidance issues. A TCAS Interoperability Workshop was held to determine potential displayalertingguidance issues that could be explored in future NASA mini HITLS. Consensus on main functionality of DAA guidance when TCAS II RA occurs. Prioritized list of independent variables for experimental design. Set of use cases to stress TCAS Interoperability.

Sandia SCADA Program -- High Surety SCADA LDRD Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

CARLSON, ROLF E.

2002-04-01

Supervisory Control and Data Acquisition (SCADA) systems are a part of the nation's critical infrastructure that is especially vulnerable to attack or disruption. Sandia National Laboratories is developing a high-security SCADA specification to increase the national security posture of the U.S. Because SCADA security is an international problem and is shaped by foreign and multinational interests, Sandia is working to develop a standards-based solution through committees such as the IEC TC 57 WG 15, the IEEE Substation Committee, and the IEEE P1547-related activity on communications and controls. The accepted standards are anticipated to take the form of a Common Criteriamore » Protection Profile. This report provides the status of work completed and discusses several challenges ahead.« less

Low level drug product API form analysis - Avalide tablet NIR quantitative method development and robustness challenges.

PubMed

Pan, Duohai; Crull, George; Yin, Shawn; Grosso, John

2014-02-01

Avalide(@), a medication used for the treatment of hypertension, is a combination of Irbesartan, and Hydrochlorothiazide. Irbesartan, one of the active pharmaceutical ingredients (API) in Avalide products, exists in two neat crystalline forms: Form A and Form B. Irbesartan Form A is the API form used in a wet granulation for the preparation of Avalide tablets. The presence of the less soluble Irbesartan Form B in Avalide tablets may result in the slower dissolution. In this paper, we have presented our work on the method development, verification and challenges of quantitatively detecting, via NIR and ssNMR, very small amounts of Irbesartan Form B in Avalide tablets. As part of the NIR method development and qualification, limit of detection, linearity and accuracy were examined. In addition, a limited study of the robustness of the method was conducted and a bias in the level of Form B was correlated to the ambient humidity. ssNMR, a primary method for the determination of polymorphic composition, was successfully used as an orthogonal technique to verify the accuracy of the NIR method and added to the confidence in the NIR method. The speed and efficiency of the NIR method make it a suitable and convenient tool for routine analysis of Avalide tablets for Form B in a QC environment. Copyright © 2013 Elsevier B.V. All rights reserved.

Epoxy blanket protects milled part during explosive forming

NASA Technical Reports Server (NTRS)

1966-01-01

Epoxy blanket protects chemically milled or machined sections of large, complex structural parts during explosive forming. The blanket uniformly covers all exposed surfaces and fills any voids to support and protect the entire part.

Late Life Employment Histories and Their Association With Work and Family Formation During Adulthood: A Sequence Analysis Based on ELSA.

PubMed

Wahrendorf, Morten; Zaninotto, Paola; Hoven, Hanno; Head, Jenny; Carr, Ewan

2017-05-31

To extend research on workforce participation beyond age 50 by describing entire employment histories in later life and testing their links to prior life course conditions. We use data from the English Longitudinal Study of Ageing, with retrospective information on employment histories between age 50 and 70 for 1,103 men and 1,195 women (n = 2,298). We apply sequence analysis and group respondents into eight clusters with similar histories. Using multinomial regressions, we then test their links to labor market participation, partnership, and parenthood histories during early (age 20-34) and mid-adulthood (age 35-49). Three clusters include histories dominated by full-time employees but with varying age of retirement (before, at, and after age 60). One cluster is dominated by self-employment with comparatively later retirement. Remaining clusters include part-time work (retirement around age 60 or no retirement), continuous domestic work (mostly women), or other forms of nonemployment. Those who had strong attachments to the labor market during adulthood are more likely to have histories of full-time work up until and beyond age 60, especially men. Parenthood in early adulthood is related to later retirement (for men only). Continued domestic work was not linked to parenthood. Partnered women tend to work part-time or do domestic work. The findings remain consistent after adjusting for birth cohort, childhood adversity, life course health, and occupational position. Policies aimed at increasing the proportion of older workers not only need to address later stages of the life course but also early and mid-adulthood. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America.

Work design and management in the manufacturing sector: development and validation of the Work Organisation Assessment Questionnaire.

PubMed

Griffiths, A; Cox, T; Karanika, M; Khan, S; Tomás, J M

2006-10-01

To examine the factor structure, reliability, and validity of a new context-specific questionnaire for the assessment of work and organisational factors. The Work Organisation Assessment Questionnaire (WOAQ) was developed as part of a risk assessment and risk reduction methodology for hazards inherent in the design and management of work in the manufacturing sector. Two studies were conducted. Data were collected from 524 white- and blue-collar employees from a range of manufacturing companies. Exploratory factor analysis was carried out on 28 items that described the most commonly reported failures of work design and management in companies in the manufacturing sector. Concurrent validity data were also collected. A reliability study was conducted with a further 156 employees. Principal component analysis, with varimax rotation, revealed a strong 28-item, five factor structure. The factors were named: quality of relationships with management, reward and recognition, workload, quality of relationships with colleagues, and quality of physical environment. Analyses also revealed a more general summative factor. Results indicated that the questionnaire has good internal consistency and test-retest reliability and validity. Being associated with poor employee health and changes in health related behaviour, the WOAQ factors are possible hazards. It is argued that the strength of those associations offers some estimation of risk. Feedback from the organisations involved indicated that the WOAQ was easy to use and meaningful for them as part of their risk assessment procedures. The studies reported here describe a model of the hazards to employee health and health related behaviour inherent in the design and management of work in the manufacturing sector. It offers an instrument for their assessment. The scales derived which form the WOAQ were shown to be reliable, valid, and meaningful to the user population.

High-Voltage Leak Detection of a Parenteral Proteinaceous Solution Product Packaged in Form-Fill-Seal Plastic Laminate Bags. Part 3. Chemical Stability and Visual Appearance of a Protein-Based Aqueous Solution for Injection as a Function of HVLD Exposure.

PubMed

Rasmussen, Mats; Damgaard, Rasmus; Buus, Peter; Guazzo, Dana Morton

2013-01-01

This Part 3 of this three-part research series reports the impact of high-voltage leak detection (HVLD) exposure on the physico-chemical stability of the packaged product. The product, intended for human administration by injection, is an aqueous solution formulation of the rapid acting insulin analogue, insulin aspart (NovoRapid®/NovoLog®) by Novo Nordisk A/S, Bagsværd, Denmark. The package is a small-volume form-fill-seal plastic laminate bag. Product-packages exposed to HVLD were compared to unexposed product after storage for 9 months at recommended storage conditions of 5 ± 3 °C. No differences in active ingredient or degradation products assays were noted. No changes in any other stability indicating parameter results were observed. This report concludes this three-part series. Part 1 documented HVLD method development and validation work. Part 2 explored the impact of various package material, package temperature, and package storage conditions on HVLD test results. Detection of leaks in the bag seal area was investigated. In conclusion, HVLD is reported to be a validatable leak test method suitable for rapid, nondestructive container-closure integrity evaluation of the subject product-package. In Part 1 of this three-part series, a leak test method based on electrical conductivity and capacitance, also called high-voltage leak detection (HVLD), was proven to find hole leaks in small plastic bags filled with a solution of insulin aspart intended for human injection (NovoRapid®/NovoLog® by Novo Nordisk A/S, Bagsværd, Denmark). In Part 2, the ability of the HVLD method to find other types of package leaks was tested, and the impact of package material and product storage temperature on HVLD results was explored. This final Part 3 checked how well the packaged protein drug solution maintained its potency after HVLD exposure over 9 months of storage under long-term stability conditions. Results showed that HVLD caused no harm to the product.

32 CFR Appendix B to Part 77 - DD Form 2581, Operation Transition Employer Registration

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 2581, Operation Transition Employer Registration B Appendix B to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... to Part 77—DD Form 2581, Operation Transition Employer Registration ER10AU94.042 ER10AU94.043 ...

12 CFR Appendix A to Part 213 - Model Forms

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Model Forms A Appendix A to Part 213 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CONSUMER LEASING (REGULATION M) Pt. 213, App. A Appendix A to Part 213—Model Forms A-1Model Open-End or Finance Vehicle Lease...

12 CFR Appendix A to Part 213 - Model Forms

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Model Forms A Appendix A to Part 213 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CONSUMER LEASING (REGULATION M) Pt. 213, App. A Appendix A to Part 213—Model Forms A-1Model Open-End or Finance Vehicle Lease...

45 CFR Appendix B to Part 93 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 93 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION NEW RESTRICTIONS ON LOBBYING Pt. 93, App. B Appendix B to Part 93—Disclosure Form To Report Lobbying EC01JA91.003...

45 CFR Appendix B to Part 93 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 93 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION NEW RESTRICTIONS ON LOBBYING Pt. 93, App. B Appendix B to Part 93—Disclosure Form To Report Lobbying EC01JA91.003...

32 CFR Appendix B to Part 45 - DD Form 214ws

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false DD Form 214ws B Appendix B to Part 45 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. B Appendix B to Part...

10 CFR Appendix B to Part 601 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 601 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS NEW RESTRICTIONS ON LOBBYING Pt. 601, App. B Appendix B to Part 601—Disclosure Form To Report Lobbying EC01OC91.009 EC01OC91.010...

49 CFR Appendix B to Part 26 - Uniform Report of DBE Awards or Commitments and Payments Form

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Uniform Report of DBE Awards or Commitments and Payments Form B Appendix B to Part 26 Transportation Office of the Secretary of Transportation... PROGRAMS Pt. 26, App. B Appendix B to Part 26—Uniform Report of DBE Awards or Commitments and Payments Form...

10 CFR Appendix B to Part 601 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Disclosure Form To Report Lobbying B Appendix B to Part 601 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS NEW RESTRICTIONS ON LOBBYING Pt. 601, App. B Appendix B to Part 601—Disclosure Form To Report Lobbying EC01OC91.009 EC01OC91.010...

32 CFR Appendix B to Part 45 - DD Form 214ws

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false DD Form 214ws B Appendix B to Part 45 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE PERSONNEL, MILITARY AND CIVILIAN CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. B Appendix B to Part...

33 CFR Appendix A to Part 105 - Facility Vulnerability and Security Measures Summary (Form CG-6025)

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Facility Vulnerability and Security Measures Summary (Form CG-6025) A Appendix A to Part 105 Navigation and Navigable Waters COAST... Appendix A to Part 105—Facility Vulnerability and Security Measures Summary (Form CG-6025) ER22OC03.000...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 1 2013-07-01 2013-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

17 CFR Appendix C to Part 4 - Form CTA-PR

Code of Federal Regulations, 2014 CFR

2014-04-01

... 17 Commodity and Securities Exchanges 1 2014-04-01 2014-04-01 false Form CTA-PR C Appendix C to Part 4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION COMMODITY POOL OPERATORS AND COMMODITY TRADING ADVISORS Pt. 4, App. C Appendix C to Part 4—Form CTA-PR ER24FE12.052 ER24FE12...

44 CFR Appendix B to Part 18 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2011 CFR

2011-10-01

... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 18 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY GENERAL NEW RESTRICTIONS ON LOBBYING Pt. 18, App. B Appendix B to Part 18—Disclosure Form To Report Lobbying...

32 CFR Appendix D to Part 113 - Sample DD Form 2654, “Involuntary Allotment Notice and Processing”

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Sample DD Form 2654, âInvoluntary Allotment Notice and Processingâ D Appendix D to Part 113 National Defense Department of Defense OFFICE OF THE..., App. D Appendix D to Part 113—Sample DD Form 2654, “Involuntary Allotment Notice and Processing...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 1 2014-07-01 2014-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 1 2011-07-01 2011-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

32 CFR Appendix C to Part 77 - DD Form 2581-1, Public and Community Service Organization Validation

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 1 2012-07-01 2012-07-01 false DD Form 2581-1, Public and Community Service Organization Validation C Appendix C to Part 77 National Defense Department of Defense OFFICE OF THE SECRETARY..., App. C Appendix C to Part 77—DD Form 2581-1, Public and Community Service Organization Validation...

Ultrasonic alignment of microparticles in nozzle-like geometries

NASA Astrophysics Data System (ADS)

Whittaker, Molly A.; Dauson, Erin R.; Parra-Raad, Jaime; Heard, Robert A.; Oppenheim, Irving J.

2018-03-01

Additive manufacturing (3-D printing) is presently limited by the mechanical properties of the materials, such as polymer resins, that are otherwise efficient and economical for part-forming. Reinforcing the resin with microscale fibers and/or particles would be an effective mechanism to achieve desired mechanical properties such as strength and ductility. Our work combines standing wave ultrasonics and microfluidics to align microparticles in devices that can act as print nozzles, based in part on our prior work with cell sorting. In this paper three different approaches are presented illustrating different engineering tradeoffs, and demonstrating laboratory results of particle alignment. First acoustic resonators are discussed, in which the ultrasonic standing waves result mostly from the mechanical properties of the microfluidic structure, excited by a piezoceramic transducer. Next non-resonant microfluidic structures are discussed, in which ultrasonic standing waves are produced directly by symmetrical transducer deployment. Finally, devices that combine nozzle-like structures, which themselves are suitable acoustic resonators, subjected to symmetrical ultrasonic excitation are presented. We will show that all three configurations will align microparticles, and discuss the tradeoffs among them for subsequent configuration of a print nozzle.

The use of nanomaterials for mass spectrometry can be uplifting for analyte detection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, J.; Lipson, R. H.

2014-03-31

Surface-Assisted Laser Desorption Ionization (SALDI) involves desorbing and ionizing analyte molecules from a nanoporous substrate by laser irradiation for detection in a mass spectrometer. In this work experiments were designed to better understand the mechanisms governing desorption and ionization for Desorption Ionization On Silicon (DIOS), a variant of SALDI which uses porous silicon (pSi) as a substrate. Experiments are also reported for other nanoporous semiconducting materials (WO{sub 3}, TiO{sub 2}) which exhibit very similar behaviors; specifically, that both protonated analyte ions and analyte radical cations can be generated with relative intensities that depend on the position of the incident lasermore » focus relative to substrate surface. While thermal desorption appears to be important, preliminary evidence suggests that the ionization mechanism leading to protonated analytes involves in part electrons and holes formed when photoexciting the substrate above its electronic band gap, and the presence of defect states within the band gap. Radical cation formation appears to be driven in part by electron transfer due to the large electron affinity of each substrate used in this work.« less

Part-time work among pediatricians expands.

PubMed

Cull, William L; O'Connor, Karen G; Olson, Lynn M

2010-01-01

The objective of this study was to track trends in part-time employment among pediatricians from 2000 to 2006 and to examine differences within subgroups of pediatricians. As part of the Periodic Survey of Fellows, national random samples of American Academy of Pediatrics members were surveyed in 2000, 2003, and 2006. These surveys shared questions concerning working part-time and other practice characteristics. Roughly 1600 pediatricians were included in each random sample. Totals of 812 (51%), 1020 (63%), and 1013 (62%) pediatricians completed the surveys in 2000, 2003, and 2006, respectively. Analyses were limited to nonretired, posttrainee pediatricians. The number of pediatricians who reported that they work part-time increased from 15% in 2000, to 20% in 2003, to 23% in 2006. The pattern of increased part-time work from 2000 to 2006 held for many subgroups, including men, women, pediatricians who were younger than 40 years, pediatricians who were aged >or=50 years, pediatricians who worked in an urban inner city, pediatricians who worked in suburban areas, general pediatricians, and subspecialist pediatricians. Those who were working part-time were more satisfied within their professional and personal activities. Part-time pediatricians worked on average 14.3 fewer hours per week in direct patient care. Increases in part-time work are apparent throughout pediatrics. The possible continued growth of part-time is an important trend within the field of pediatrics that will need to be monitored.

Gravitational instantons admit hyper-Kähler structure

NASA Astrophysics Data System (ADS)

Aliev, A. N.; Nutku, Y.

1999-01-01

We construct the explicit form of three almost-complex structures that a Riemannian manifold with self-dual curvature admits and show that their Nijenhuis tensors vanish so that they are integrable. This proves that gravitational instantons with self-dual curvature admit hyper-Kähler structure. In order to arrive at the three vector-valued 1-forms defining almost-complex structure, we give a spinor description of real four-dimensional Riemannian manifolds with Euclidean signature in terms of two independent sets of two-component spinors. This is a version of the original Newman-Penrose formalism that is appropriate to the discussion of the mathematical, as well as physical properties of gravitational instantons. We shall build on the work of Goldblatt who first developed an NP formalism for gravitational instantons but we shall adopt it to differential forms in the NP basis to make the formalism much more compact. We shall show that the spin coefficients, connection 1-form, curvature 2-form, Ricci and Bianchi identities, as well as the Maxwell equations naturally split up into their self-dual and anti-self-dual parts corresponding to the two independent spin frames. We shall give the complex dyad as well as the spinor formulation of the almost-complex structures and show that they reappear under the guise of a triad basis for the Petrov classification of gravitational instantons. Completing the work of Salamon on hyper-Kähler structure, we show that the vanishing of the Nijenhuis tensor for all three almost-complex structures depends on the choice of a self-dual gauge for the connection which is guaranteed by virtue of the fact that the curvature 2-form is self-dual for gravitational instantons.

Challenges for academic accreditation: the UK experience

NASA Astrophysics Data System (ADS)

Shearman, Richard; Seddon, Deborah

2010-08-01

Several factors (government policy, demographic trends, employer pressure) are leading to new forms of degree programmes in UK universities. The government is strongly encouraging engagement between universities and employers. Work-based learning is increasingly found in first and second cycle programmes, along with modules designed by employers and increasing use of distance learning. Engineering faculties are playing a leading part in these developments, and the Engineering Council, the engineering professional bodies and some universities are collaborating to develop work-based learning programmes as a pathway to professional qualification. While potentially beneficial to the engineering profession, these developments pose a challenge to traditional approaches to programme accreditation. This paper explores how this system deals with these challenges and highlights the issues that will have to be addressed to ensure that the system can cope effectively with change, especially the development of individually tailored, work-based second cycle programmes, while maintaining appropriate standards and international confidence.

Algorithm of probabilistic assessment of fully-mechanized longwall downtime

NASA Astrophysics Data System (ADS)

Domrachev, A. N.; Rib, S. V.; Govorukhin, Yu M.; Krivopalov, V. G.

2017-09-01

The problem of increasing the load on a long fully-mechanized longwall has several aspects, one of which is the improvement of efficiency in using available stoping equipment due to the increase in coefficient of the machine operating time of a shearer and other mining machines that form an integral part of the longwall set of equipment. The task of predicting the reliability indicators of stoping equipment is solved by the statistical evaluation of parameters of downtime exponential distribution and failure recovery. It is more difficult to solve the problems of downtime accounting in case of accidents in the face workings and, despite the statistical data on accidents in mine workings, no solution has been found to date. The authors have proposed a variant of probability assessment of workings caving using Poisson distribution and the duration of their restoration using normal distribution. The above results confirm the possibility of implementing the approach proposed by the authors.

Caring holistically within new managerialism.

PubMed

Wong, Woon Hau

2004-03-01

This article explains the attempts of nurses to practice humanistic, holistic care in line with their professionalizing strategy. Ideally, the intention of nurses is to broaden their concerns beyond the physiological needs of patients, thereby circumventing biomedical control over their work. However, the author argues that resource constraints, and the coalescing of biomedical and managerial definitions of patients, suggest that holistic notions of care are subjected to a new form of calculus and normalizing technology. Critically, nurses are more preoccupied with the day-to-day struggle to free up resources for healthcare, in particular bed spaces, and to pre-empt the problem of bed blocking. Such work suggests that the "emptying of beds" is not just a symbol of accomplishment for nursing work. From the governmentality theory of Foucault, the administration of "beds" has become part of the managerial power/knowledge discourse and an instrument for making nurses toe the financial bottom-line.

HIV/AIDS-related stigma and information behaviour: an ethnographic study in the UK.

PubMed

Namuleme, Robinah Kalemeera

2015-03-01

This feature explores the information behaviour of people infected with or affected by HIV/AIDS. It investigates specifically the difficult issue of stigma and how this shapes the ways in which people interact with vital information. The study adopted an ethnographic whereby the researcher worked as a part-time volunteer at an HIV support centre in the North of England for over a year. This is the first time that such an approach has been reported in this feature and is interesting from this perspective alone. The very rich data which was gathered as a result of the approach is also instructive. The study formed part of a PhD thesis, which Robinah Kalemeera Namuleme completed at the University of Sheffield in March 2013. © 2015 Health Libraries Journal.

Responsive persistence part I: therapist influence in postmodern practice.

PubMed

Sutherland, Olga; Turner, Jean; Dienhart, Anna

2013-10-01

Feminist and social constructionist developments in family therapy highlighted the importance of attending to therapist-client power relations and incorporating clients' understandings and preferences as a part of therapy. Significantly, less attention has been given to how postmodern therapists do use their power and influence. This is an important topic because it is therapists who have the major responsibility for guiding the interaction with clients and persisting in this so that change is facilitated. Therapist persistence in various forms and across dimensions of therapy process is examined to expand understanding of therapist influence in postmodern and collaborative work. An analysis of responsive persistence in a session with Karl Tomm as the therapist is presented to illustrate this conceptual framing. © 2013 American Association for Marriage and Family Therapy.

27 CFR 45.27 - Forms prescribed.

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF THE TREASURY (CONTINUED) TOBACCO REMOVAL OF TOBACCO PRODUCTS AND CIGARETTE PAPERS AND TUBES.... (a) The appropriate TTB officer is authorized to prescribe all forms required by this part. You must... instructions for the form, and as required by this part. You must file each form in accordance with its...

Improving machine operation management efficiency via improving the vehicle park structure and using the production operation information database

NASA Astrophysics Data System (ADS)

Koptev, V. Yu

2017-02-01

The work represents the results of studying basic interconnected criteria of separate equipment units of the transport network machines fleet, depending on production and mining factors to improve the transport systems management. Justifying the selection of a control system necessitates employing new methodologies and models, augmented with stability and transport flow criteria, accounting for mining work development dynamics on mining sites. A necessary condition is the accounting of technical and operating parameters related to vehicle operation. Modern open pit mining dispatching systems must include such kinds of the information database. An algorithm forming a machine fleet is presented based on multi-variation task solution in connection with defining reasonable operating features of a machine working as a part of a complex. Proposals cited in the work may apply to mining machines (drilling equipment, excavators) and construction equipment (bulldozers, cranes, pile-drivers), city transport and other types of production activities using machine fleet.

Individual differences in event-based prospective memory: Evidence for multiple processes supporting cue detection.

PubMed

Brewer, Gene A; Knight, Justin B; Marsh, Richard L; Unsworth, Nash

2010-04-01

The multiprocess view proposes that different processes can be used to detect event-based prospective memory cues, depending in part on the specificity of the cue. According to this theory, attentional processes are not necessary to detect focal cues, whereas detection of nonfocal cues requires some form of controlled attention. This notion was tested using a design in which we compared performance on a focal and on a nonfocal prospective memory task by participants with high or low working memory capacity. An interaction was found, such that participants with high and low working memory performed equally well on the focal task, whereas the participants with high working memory performed significantly better on the nonfocal task than did their counterparts with low working memory. Thus, controlled attention was only necessary for detecting event-based prospective memory cues in the nonfocal task. These results have implications for theories of prospective memory, the processes necessary for cue detection, and the successful fulfillment of intentions.

Development of a Methodology to Conduct Usability Evaluation for Hand Tools that May Reduce the Amount of Small Parts that are Dropped During Installation while Processing Space Flight Hardware

NASA Technical Reports Server (NTRS)

Miller, Darcy

2000-01-01

Foreign object debris (FOD) is an important concern while processing space flight hardware. FOD can be defined as "The debris that is left in or around flight hardware, where it could cause damage to that flight hardware," (United Space Alliance, 2000). Just one small screw left unintentionally in the wrong place could delay a launch schedule while it is retrieved, increase the cost of processing, or cause a potentially fatal accident. At this time, there is not a single solution to help reduce the number of dropped parts such as screws, bolts, nuts, and washers during installation. Most of the effort is currently focused on training employees and on capturing the parts once they are dropped. Advances in ergonomics and hand tool design suggest that a solution may be possible, in the form of specialty hand tools, which secure the small parts while they are being handled. To assist in the development of these new advances, a test methodology was developed to conduct a usability evaluation of hand tools, while performing tasks with risk of creating FOD. The methodology also includes hardware in the form of a testing board and the small parts that can be installed onto the board during a test. The usability of new hand tools was determined based on efficiency and the number of dropped parts. To validate the methodology, participants were tested while performing a task that is representative of the type of work that may be done when processing space flight hardware. Test participants installed small parts using their hands and two commercially available tools. The participants were from three groups: (1) students, (2) engineers / managers and (3) technicians. The test was conducted to evaluate the differences in performance when using the three installation methods, as well as the difference in performance of the three participant groups.

Structure-Property Relationships in Novel Materials Part I: Frustrated Magnetism and Deintercalation of Honeycomb Oxides Part II: Electron-Precise Gold Intermetallics

NASA Astrophysics Data System (ADS)

Seibel, Elizabeth M.

This thesis is a study of the structure-property relationships of novel materials, broken into two major parts. The first part, "Part I: Frustrated Magnetism and Deintercalation of Honeycomb Oxides" explores new, layered nickel oxides and their properties, specifically the synthesis, structure, magnetism, and applications of the Na3Ni 2BiO6-NaNi2BiO6-NaNi2BiO 6•1.7H2O system. These phases are of interest to the solid-state and physics communities because they display frustrated magnetism on a hexagonal lattice. Chapter 3 explores the chemistry and physics of Na 3Ni2BiO6; Chapter 4 then discusses its chemical deintercalation and subsequent hydration to form the NaNi2BiO 6-NaNi2BiO6•1.7H2O system. These phases are examples of sought-after spin-1/2 systems on a hexagonal lattice. The second part of this thesis, "Part II: Electron-Precise Gold Intermetallics" explores novel, electron-precise intermetallics in the Lanthanide-gold-pnictide ternary system. The chemistry of gold-containing solids has not been well-studied despite gold's unusual physics, motivating the study. There are three new families discussed herein. The first, found in Chapter 7, is of the type LnAuSb (Ln = Lanthanide) which are new Dirac semimetals. The work illustrates a chemical design principle that can be used to predict new Dirac Semimetals, which is important given that the field of topological materials is rapidly growing. Chapter 8 discusses materials of the type LnAuBi2, which are layered intermetallics with a high degree of magnetic anisotropy. Finally, Chapter 9 explores new phases of the form Ln 3Au3Bi4. These materials are semiconductors with high Seebeck coefficients at room temperature, indicating their potential for use as thermoelectric materials.

[Rehabilitation in the view of small and midsized enterprises: knowledge, appreciation and possibilities to cooperate - results of the KoRB-project].

PubMed

Hesse, B; Heuer, J; Gebauer, E

2008-12-01

The experiences of small and midsized enterprises (SME) with medical rehabilitation were investigated in the KoRB-Study (KoRB= KOoperation Rehabilitation und Betrieb) for the first time. Opportunities for a targeted cooperation between the statutory pension insurance and these enterprises were explored. Based on explorative interviews, Westphalian employers, members of the works council, occupational health practitioners and employees were interrogated about the image of and their appreciation of medical rehabilitation in the work setting. Experience with rehabilitation and the level of information on rehabilitation were recorded as well as the compatibility of rehabilitation with operative processes in the working site. In addition rehab hospitals were asked about their experience in cooperating with enterprises. 697 employers of small and midsized enterprises, 458 members of the works councils, 73 occupational health practitioners, 47 rehab hospitals and 3 509 employees, who are members of the German Pension Fund of Westphalia, took part in the survey. Especially employers perceived rehabilitation positively and reported good experiences. Among the employees, those who had taken part in rehabilitation showed the highest appreciation. Occupational health practitioners were more restrained in their appraisal. Some of them complained about a lack of sustainability. The different target groups of the survey felt differently well informed about rehabilitation - best ratings came from the occupational health practitioners, worst ratings from the employees. All groups would welcome more accessible information in case of need. Medical rehabilitation in its standard form of "3 weeks full-time" often causes severe logistic problems in SME (e. g., replacement of employee, loss of experience). However the financial burden is perceived as less problematic. Employers favour alternative rehab models, which allow part-time working. Many employees, who expressed a need for rehabilitation, refrained from applying for rehabilitation on account of worries about loosing their employment. Both rehab clinicians and occupational health practitioners argued in favour of improved communication and cooperation in order to adapt medical rehab to the specific requirements of the working place and to assure a smooth reintegration into work.

The talc, soapstone, and asbestos deposits of Massachusetts

USGS Publications Warehouse

Chute, Newton Earl

1969-01-01

Several talc and soapstone deposits were worked in Massachusetts from about 1810 to 1922. Most of these deposits are in the Chester Amphibolite, or in serpentine lenses in or adjacent to the amphibolite along a belt that extends north-south across the State from Rowe to West Granville; it appears to be a continuation of the Vermont talc belt. The only deposits outside of this belt that have been worked are a talc and soapstone deposit in the north-west corner of Hinsdale and soapstone deposits on the east side of Soapstone Hill in the western part of Petersham. Very little asbestos has been produced in Massachusetts. A small amount of anthophyllite asbestos was obtained from the deposit in Hinsdale, and from a deposit in southwestern Pelham. The talc and soapstone deposits of Massachusetts were formed from serpentine and possibly from amphibolite, schist, and dolomitic limestone. Those fromed from serpentine are mainly at the ends of the serpentine bodies, and those that appear to have been formed from amphibolite or schist are on the faults and folds.

Recovery of actinides from actinide-aluminium alloys by chlorination: Part III - Chlorination with HCl(g)

NASA Astrophysics Data System (ADS)

Meier, Roland; Souček, Pavel; Walter, Olaf; Malmbeck, Rikard; Rodrigues, Alcide; Glatz, Jean-Paul; Fanghänel, Thomas

2018-01-01

Two steps of a pyrochemical route for the recovery of actinides from spent metallic nuclear fuel are being investigated at JRC-Karlsruhe. The first step consists in electrorefining the fuel in molten salt medium implying aluminium cathodes. The second step is a chlorination process for the separation of actinides (An) from An-Al alloys formed on the cathodes. The chlorination process, in turn, consists of three steps; the distillation of adhered salt (1), the chlorination of An-Al by HCl/Cl2 under formation of AlCl3 and An chlorides (2), and the subsequent sublimation of AlCl3 (3). In the present work UAl2, UAl3, NpAl2, and PuAl2 were chlorinated with HCl(g) in a temperature range between 300 and 400 °C forming UCl4, NpCl4 or PuCl3 as the major An containing phases, respectively. Thermodynamic calculations were carried out to support the experimental work. The results showed a high chlorination efficiency for all used starting materials and indicated that the sublimation step may not be necessary when using HCl(g).

A time for change: an exploration of attitudes toward part-time work in academia among women internists and their division chiefs.

PubMed

Harrison, Rebecca A; Gregg, Jessica L

2009-01-01

Increasing numbers of clinicians desire part-time work, and many will opt out of academic medicine if the barriers to part-time work are too great. Purposeful sampling was used to investigate the experiences of part-time academic physicians and their division leaders to understand (1) how each identified the negative and positive consequences of part-time work, and (2) how each conceptualize part-time work. In 2004, the authors interviewed the Society of General Medicine Horn Scholars Program applicants and their division chiefs from the 2001 and 2004 award cycles and performed a qualitative analysis of the one- to two-hour audiotaped interviews. Seven out of nine eligible applicants and six of seven division chiefs participated. All applicants were female junior faculty clinician educators in academic internal medicine from seven institutions. All division chiefs were male full-time faculty members. Both applicants and division chiefs identified multiple specific negative and positive consequences of part-time work. Analysis of interviews suggested that both groups tended to frame part-time work as a decision to "work less" or to "work differently." Self-reflection and articulation of values helped some faculty determine where they derive the greatest happiness and fulfillment personally and professionally. As more academics seek work-life balance and consider part-time work as a tool to achieve that balance, academic medicine will be challenged to develop creative models for integrating successful part-time physicians, or it will lose that segment of the workforce. This study's findings suggest that one such model may require that physicians and their leaders reconceptualize work altogether.

Correcting Part-Time Misconceptions. Policy Watch.

ERIC Educational Resources Information Center

Employment Policies Inst., Washington, DC.

Part-time workers are those working fewer than 35 hours per week. Of the 113 million wage and salary workers in the labor force, only 17 percent are classified as part time. Four of five part-time workers choose to work part-time rather than full-time. The 3.8 million involuntary part-time workers constitute only 3.4 percent of the work force.…

Cognitive individualism and the child as scientist program.

PubMed

Wringe, Bill

2011-12-01

In this paper, I examine the charge that Gopnik and Meltzoff's 'Child as Scientist' program, outlined and defended in their 1997 book Words, Thoughts and Theories is vitiated by a form of 'cognitive individualism' about science. Although this charge has often been leveled at Gopnik and Meltzoff's work, it has rarely been developed in any detail. I suggest that we should distinguish between two forms of cognitive individualism which I refer to as 'ontic' and 'epistemic' cognitive individualism (OCI and ECI respectively). I then argue - contra Ronald Giere - that Gopnik and Meltzoff's commitment to OCI is relatively unproblematic, since it is an easily detachable part of their view. By contrast, and despite their explicit discussion of the issue, their commitment to ECI is much more problematic. Copyright © 2011 Elsevier Ltd. All rights reserved.

Capillary Flows Along Open Channel Conduits: The Open-Star Section

NASA Technical Reports Server (NTRS)

Weislogel, Mark; Geile, John; Chen, Yongkang; Nguyen, Thanh Tung; Callahan, Michael

2014-01-01

Capillary rise in tubes, channels, and grooves has received significant attention in the literature for over 100 years. In yet another incremental extension of such work, a transient capillary rise problem is solved for spontaneous flow along an interconnected array of open channels forming what is referred to as an 'open-star' section. This geometry possesses several attractive characteristics including passive phase separations and high diffusive gas transport. Despite the complex geometry, novel and convenient approximations for capillary pressure and viscous resistance enable closed form predictions of the flow. As part of the solution, a combined scaling approach is applied that identifies unsteady-inertial-capillary, convective-inertial-capillary, and visco-capillary transient regimes in a single parameter. Drop tower experiments are performed employing 3-D printed conduits to corroborate all findings.

The development of the imaging polarimeter's polarizer on the basis of the polarizing film

NASA Astrophysics Data System (ADS)

Vidmachenko, A. P.; Ivanov, Yu. S.; Syniavskyi, I. I.

2015-07-01

Work has begun on the developing of the scientific equipment "Spectrometer polarimeter", which is planned as one of five devices that form part of the Russian-Ukrainian space experiment "Planetary Monitoring". The devices are designed to form images of celestial objects in the focal plane of a planetary telescope (PT-600) and to register spectral and polarimetric information on gas and aerosol composition of the atmospheres of planets and physics and chemical properties of the surface layers of atmosphereless astronomical bodies. A model of a polarizer based on the use of polarizing films has been designed. This model can be used in the spectrometer-polarimeter. The results of the investigation of the polarizer in the spectral range 420-850 nm are given.

Strength and Formability Improvement of Al-Cu-Mn Aluminum Alloy Complex Parts by Thermomechanical Treatment with Sheet Hydroforming

NASA Astrophysics Data System (ADS)

Chen, Yi-Zhe; Liu, Wei; Yuan, Shi-Jian

2015-05-01

Normally, the strength and formability of aluminum alloys can be increased largely by severe plastic deformation and heat treatment. However, many plastic deformation processes are more suitable for making raw material, not for formed parts. In this article, an experimental study of the thermomechanical treatment by using the sheet hydroforming process was developed to improve both mechanical strength and formability for aluminum alloys in forming complex parts. The limiting drawing ratio, thickness, and strain distribution of complex parts formed by sheet hydroforming were investigated to study the formability and sheet-deformation behavior. Based on the optimal formed parts, the tensile strength, microhardness, grain structure, and strengthening precipitates were analyzed to identify the strengthening effect of thermomechanical treatment. The results show that in the solution state, the limiting drawing ratio of cylindrical parts could be increased for 10.9% compared with traditional deep drawing process. The peak values of tensile stress and microhardness of formed parts are 18.0% and 12.5% higher than that in T6 state. This investigation shows that the thermomechanical treatment by sheet hydroforming is a potential method for the products manufacturing of aluminum alloy with high strength and good formability.

Finite element analysis of chip formation usingale method

NASA Astrophysics Data System (ADS)

Jayaprakash, V.

2017-05-01

In recent times, many studies made in FEM on plain isotropic metal plate formulation. The stress analysis plays the significant role in the stability of structural safety and system. The stress and distortion estimation is very helpful for designing and manufacturing product well. Usually the residual stress and plastic strain determine the fatigue life of structure, it also plays the significant role in designing and choosing material. When the load magnitude increases the crack starts to form, decreasing the work load and the residual stress reduces the damage of the metal. The manufacturing process is a key parameter in process and forming the part of any system. However, machining operation involves complex thing like hot development, material property and other estimates based on transition of the plastic strain and residual stress. The reduction of residual stress plays the complexity role in the finite element study. This paper deals with the manufacturing process with less residual stress and strain. The results shows that, by applying the ALE method in machining we can reduce the load on the work piece hence the life type of the work piece can be increased. We also investigate the cutting tool wear and there efficiency since it is a essential machine member in fabrication technology. ABAQUS platform used to solve the machining operation

Chaotic non-planar vibrations of the thin elastica. Part I: Experimental observation of planar instability

NASA Astrophysics Data System (ADS)

Cusumano, J. P.; Moon, F. C.

1995-01-01

In this two-part paper, the results of an investigation into the non-linear dynamics of a flexible cantilevered rod (the elastica) with a thin rectangular cross-section are presented. An experimental examination of the dynamics of the elastica over a broad parameter range forms the core of Part I. In Part II, the experimental work is related to a theoretical study of the mechanics of the elastica, and the study of a two-degree-of-freedom model obtained by modal projection. The experimental system used in this investigation is a rod with clamped-free boundary conditions, forced by sinusoidally displacing the clamped end. Planar periodic motions of the driven elastica are shown to lose stability at distinct resonant wedges, and the resulting motions are shown in general to be non-planar, chaotic, bending-torsion oscillations. Non-planar motions in all resonances exhibit energy cascading and dynamic two-well phenomena, and a family of asymmetric, bending-torsion non-linear modes is discovered. Correlation dimension calculations are used to estimate the number of active degrees of freedom in the system.

American Association for Emergency Psychiatry Task Force on Medical Clearance of Adults Part I: Introduction, Review and Evidence-Based Guidelines

PubMed Central

Anderson, Eric L.; Nordstrom, Kimberly; Wilson, Michael P.; Peltzer-Jones, Jennifer M.; Zun, Leslie; Ng, Anthony; Allen, Michael H.

2017-01-01

Introduction In the United States, the number of patients presenting to the emergency department (ED) for a mental health concern is significant and expected to grow. The breadth of the medical evaluation of these patients is controversial. Attempts have been made to establish a standard evaluation for these patients, but to date no nationally accepted standards exist. A task force of the American Association of Emergency Psychiatry, consisting of physicians from emergency medicine and psychiatry, and a psychologist was convened to form consensus recommendations on the medical evaluation of psychiatric patients presenting to EDs. Methods The task force reviewed existing literature on the topic of medical evaluation of psychiatric patients in the ED (Part I) and then combined this with expert consensus (Part II). Results In Part I, we discuss terminological issues and existing evidence on medical exams and laboratory studies of psychiatric patients in the ED. Conclusion Emergency physicians should work cooperatively with psychiatric receiving facilities to decrease unnecessary testing while increasing the quality of medical screening exams for psychiatric patients who present to EDs. PMID:28210358

Measurements of stratospheric NO, NO2, and N2O5 by ISAMS: Preliminary observations and data validation

NASA Technical Reports Server (NTRS)

Kerridge, Brian J.; Ballard, J.; Knight, R. J.; Stevens, A. D.; Reburn, J.; Morris, P.; Remedios, John J.; Taylor, Fredric W.

1994-01-01

The Improved Stratospheric and Mesospheric Sounder (ISAMS) is a multichannel radiometer and forms part of the science payload of the Upper Atmosphere Research Satellite (UARS). ISAMS measures infrared emissions from the Earth's atmosphere in several wavelength bands. Three such bands include emission from nitric oxide, nitrogen dioxide, and dinitrogen pentoxide. In this paper, we briefly discuss how the ISAMS instrument measures NO, NO2, and N2O5. We also present preliminary data from these channels and describe preliminary validation work.

Results of Fall 1994 sampling of gunite and associated tanks at the Oak Ridge National Laboratory, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

This Technical Memorandum, was developed under Work Breakdown Structure 1.4.12.6.1.01.41.12.02. 11 (Activity Data Sheet 3301, ``WAG 1``). This document provides the Environmental Restoration Program with analytical results from liquid and sludge samples from the Gunite and Associated Tanks (GAAT). Information provided in this report forms part of the technical basis for criticality safety, systems safety, engineering design, and waste management as they apply to the GAAT treatability study and remediation.

[Breaking the silence in Colombia to resist violence 2/2].

PubMed

Habozit, Anne; Moro, Marie Rose

2013-01-01

The war in Columbia is the source of permanent and widespread violence, of which the civilian population is the main victim. Medical-psychological teams from Médecins Sans Frontières France worked in Tolima, a region particularly affected by the conflict, between 2001 and 2008, and were able to study the complexity of the forms of violence and their consequences. While the consequences for individuals, analysed in part one, are devastating, the impact of the conflict on society and families provides a better understanding of this society and its generalised violence.

Individualized student advisement for preparation for the national council licensure examination for registered nurses: a community college experience.

PubMed

Anderson, Ruth M

2007-01-01

The success of faculty is, in part, measured by the success of their students. One measurement of student success is passing the National Council Licensure Examination for Registered Nurses. However, some students require assistance beyond routine class work; they require a personalized plan for studying based on individualized areas of weakness. The author reviews the process of implementing a program of individualized student advisement. Included are samples of forms that have been developed to assist in this process.

Chemical Release and Radiation Effects Satellite (CRRES) program archiving and Puerto Rican sounding rocket campaign

NASA Technical Reports Server (NTRS)

Miller, George P.

1992-01-01

The tasks undertaken as part of this contract included the continued coordination and documentation of the CRRES program and the development of an archive that details, in easily accessible form, the experimental results obtained by the CRRES Program. Details of the work undertaken and results achieved are summarized in the following sections. The achievement of this goal is clearly demonstrated in the appendices attached to this report and the success, in both scientific and public relation terms, of the El Coqui rocket campaign.

Task Force on Workplace Violence: Part I. The assessment.

PubMed

Carroll, V

1997-06-01

Prevention is key in dealing with workplace violence. Assessment, open communication within the workplace, well-designed policies, and adequate staff training form the framework for an effective violence reduction plan. Nurses offer invaluable resources to each other, their patients. and their workplace. Through effective planning and problem-solving, we can collaborate with other disciplines to enhance the future of health care and provide for a safer workplace. Just as we are advocates for safe and quality health care for our patients, we must also be champions for creating a safe work environment for ourselves.

32 CFR Appendix C to Part 113 - Sample DD Form 2653, “Involuntary Allotment Application”

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Sample DD Form 2653, âInvoluntary Allotment Applicationâ C Appendix C to Part 113 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE... Part 113—Sample DD Form 2653, “Involuntary Allotment Application” ER05JA95.002 ER05JA95.003 ...

29 CFR Appendix B to Part 93 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 1 2012-07-01 2012-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 93 Labor Office of the Secretary of Labor NEW RESTRICTIONS ON LOBBYING Pt. 93, App. B Appendix B to Part 93—Disclosure Form To Report Lobbying EC21OC91.005 EC21OC91.006 EC21OC91.007 ...

49 CFR Appendix B to Part 20 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 20 Transportation Office of the Secretary of Transportation NEW RESTRICTIONS ON LOBBYING Pt. 20, App. B Appendix B to Part 20—Disclosure Form To Report Lobbying EC02FE91.097 EC02FE91.098 EC02FE91.099 ...

34 CFR Appendix B to Part 82 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 1 2012-07-01 2012-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 82 Education Office of the Secretary, Department of Education NEW RESTRICTIONS ON LOBBYING Pt. 82, App. B Appendix B to Part 82—Disclosure Form To Report Lobbying EC21OC91.056 EC21OC91.057 EC21OC91.058 ...

29 CFR Appendix B to Part 93 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 1 2011-07-01 2011-07-01 false Disclosure Form To Report Lobbying B Appendix B to Part 93 Labor Office of the Secretary of Labor NEW RESTRICTIONS ON LOBBYING Pt. 93, App. B Appendix B to Part 93—Disclosure Form To Report Lobbying EC21OC91.005 EC21OC91.006 EC21OC91.007 ...

31 CFR Appendix B to Part 212 - Form of Notice of Right to Garnish Federal Benefits

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false Form of Notice of Right to Garnish Federal Benefits B Appendix B to Part 212 Money and Finance: Treasury Regulations Relating to Money and... ACCOUNTS CONTAINING FEDERAL BENEFIT PAYMENTS Pt. 212, App. B Appendix B to Part 212—Form of Notice of Right...

45 CFR Appendix B to Part 1168 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 3 2014-10-01 2014-10-01 false Disclosure Form To Report Lobbying B Appendix B to Part 1168 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL FOUNDATION ON THE..., App. B Appendix B to Part 1168—Disclosure Form To Report Lobbying EC01JA91.013 EC01JA91.014 EC01JA91...

22 CFR Appendix B to Part 519 - Disclosure Form To Report Lobbying

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 2 2014-04-01 2014-04-01 false Disclosure Form To Report Lobbying B Appendix B to Part 519 Foreign Relations BROADCASTING BOARD OF GOVERNORS NEW RESTRICTIONS ON LOBBYING Pt. 519, App. B Appendix B to Part 519—Disclosure Form To Report Lobbying EC13OC91.003 EC13OC91.004 EC13OC91...