Differential Effects of Paced and Unpaced Responding on delayed Serial Order Recall in Schizophrenia

PubMed Central

Hill, S. Kristian; Griffin, Ginny B.; Houk, James C.; Sweeney, John A.

2011-01-01

Working memory for temporal order is a component of working memory that is especially dependent on striatal systems, but has not been extensively studied in schizophrenia. This study was designed to characterize serial order reproduction by adapting a spatial serial order task developed for nonhuman primate studies, while controlling for working memory load and whether responses were initiated freely (unpaced) or in an externally paced format. Clinically stable schizophrenia patients (n=27) and psychiatrically healthy individuals (n=25) were comparable on demographic variables and performance on standardized tests of immediate serial order recall (Digit Span, Spatial Span). No group differences were observed for serial order recall when read sequence reproduction was unpaced. However, schizophrenia patients exhibited significant impairments when responding was paced, regardless of sequence length or retention delay. Intact performance by schizophrenia patients during the unpaced condition indicates that prefrontal storage and striatal output systems are sufficiently intact to learn novel response sequences and hold them in working memory to perform serial order tasks. However, retention for newly learned response sequences was disrupted in schizophrenia patients by paced responding, when read-out of each element in the response sequence was externally controlled. The disruption of memory for serial order in paced read-out condition indicates a deficit in frontostriatal interaction characterized by an inability to update working memory stores and deconstruct ‘chunked’ information. PMID:21705197

China Report, Economic Affairs

DTIC Science & Technology

1986-02-11

Maosheng 99 New Phase of China’s Construction Business Reported (Gong Jiao; JINGJI RIBAO, 12 Sep 85) 101 Briefs Urumqi Fertilizer Plant ...order. In order to adapt cadre work to the new Situation in which the plant director assumes full responsibility, we must make some appropriate...changes in cadres’ work system, management methods, and appointments and dismissals to ensure the implementation of the system of having plant directors

Working at the microscope: analysis of the activities involved in diagnostic pathology.

PubMed

Randell, Rebecca; Ruddle, Roy A; Quirke, Phil; Thomas, Rhys G; Treanor, Darren

2012-02-01

To study the current work practice of histopathologists to inform the design of digital microscopy systems. Four gastrointestinal histopathologists were video-recorded as they undertook their routine work. Analysis of the video data shows a range of activities beyond viewing slides involved in reporting a case. There is much overlapping of activities, supported by the 'eyes free' nature of the pathologists' interaction with the microscope. The order and timing of activities varies according to consultant. In order to support the work of pathologists adequately, digital microscopy systems need to provide support for a range of activities beyond viewing slides. Digital microscopy systems should support multitasking, while also providing flexibility so that pathologists can adapt their use of the technology to their own working patterns. © 2011 Blackwell Publishing Ltd.

Work System Assessment to Facilitate the Dissemination of a Quality Improvement Program for Optimizing Blood Culture Use: A Case Study Using a Human Factors Engineering Approach.

PubMed

Xie, Anping; Woods-Hill, Charlotte Z; King, Anne F; Enos-Graves, Heather; Ascenzi, Judy; Gurses, Ayse P; Klaus, Sybil A; Fackler, James C; Milstone, Aaron M

2017-11-20

Work system assessments can facilitate successful implementation of quality improvement programs. Using a human factors engineering approach, we conducted a work system assessment to facilitate the dissemination of a quality improvement program for optimizing blood culture use in pediatric intensive care units at 2 hospitals. Semistructured face-to-face interviews were conducted with clinicians from Johns Hopkins All Children's Hospital and University of Virginia Medical Center. Interview data were analyzed using qualitative content analysis. Blood culture-ordering practices are influenced by various work system factors, including people, tasks, tools and technologies, the physical environment, organizational conditions, and the external environment. A clinical decision-support tool could facilitate implementation by (1) standardizing blood culture-ordering practices, (2) ensuring that prescribing clinicians review the patient's condition before ordering a blood culture, (3) facilitating critical thinking, and (4) empowering nurses to communicate with physicians and advocate for adherence to blood culture-ordering guidelines. The success of interventions for optimizing blood culture use relies heavily on the local context. A work system analysis using a human factors engineering approach can identify key areas to be addressed for the successful dissemination of quality improvement interventions. © The Author 2017. Published by Oxford University Press on behalf of The Journal of the Pediatric Infectious Diseases Society. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The effect of computerized provider order entry systems on clinical care and work processes in emergency departments: a systematic review of the quantitative literature.

PubMed

Georgiou, Andrew; Prgomet, Mirela; Paoloni, Richard; Creswick, Nerida; Hordern, Antonia; Walter, Scott; Westbrook, Johanna

2013-06-01

We undertake a systematic review of the quantitative literature related to the effect of computerized provider order entry systems in the emergency department (ED). We searched MEDLINE, EMBASE, Inspec, CINAHL, and CPOE.org for English-language studies published between January 1990 and May 2011. We identified 1,063 articles, of which 22 met our inclusion criteria. Sixteen used a pre/post design; 2 were randomized controlled trials. Twelve studies reported outcomes related to patient flow/clinical work, 7 examined decision support systems, and 6 reported effects on patient safety. There were no studies that measured decision support systems and its effect on patient flow/clinical work. Computerized provider order entry was associated with an increase in time spent on computers (up to 16.2% for nurses and 11.3% for physicians), with no significant change in time spent on patient care. Computerized provider order entry with decision support systems was related to significant decreases in prescribing errors (ranging from 17 to 201 errors per 100 orders), potential adverse drug events (0.9 per 100 orders), and prescribing of excessive dosages (31% decrease for a targeted set of renal disease medications). There are tangible benefits associated with computerized provider order entry/decision support systems in the ED environment. Nevertheless, when considered as part of a framework of technical, clinical, and organizational components of the ED, the evidence base is neither consistent nor comprehensive. Multimethod research approaches (including qualitative research) can contribute to understanding of the multiple dimensions of ED care delivery, not as separate entities but as essential components of a highly integrated system of care. Copyright © 2013 American College of Emergency Physicians. Published by Mosby, Inc. All rights reserved.

Unified formalism for the generalized kth-order Hamilton-Jacobi problem

NASA Astrophysics Data System (ADS)

Colombo, Leonardo; de Léon, Manuel; Prieto-Martínez, Pedro Daniel; Román-Roy, Narciso

2014-08-01

The geometric formulation of the Hamilton-Jacobi theory enables us to generalize it to systems of higher-order ordinary differential equations. In this work we introduce the unified Lagrangian-Hamiltonian formalism for the geometric Hamilton-Jacobi theory on higher-order autonomous dynamical systems described by regular Lagrangian functions.

Unified formalism for higher order non-autonomous dynamical systems

NASA Astrophysics Data System (ADS)

Prieto-Martínez, Pedro Daniel; Román-Roy, Narciso

2012-03-01

This work is devoted to giving a geometric framework for describing higher order non-autonomous mechanical systems. The starting point is to extend the Lagrangian-Hamiltonian unified formalism of Skinner and Rusk for these kinds of systems, generalizing previous developments for higher order autonomous mechanical systems and first-order non-autonomous mechanical systems. Then, we use this unified formulation to derive the standard Lagrangian and Hamiltonian formalisms, including the Legendre-Ostrogradsky map and the Euler-Lagrange and the Hamilton equations, both for regular and singular systems. As applications of our model, two examples of regular and singular physical systems are studied.

Specification for Visual Requirements of Work-Centered Software Systems

DTIC Science & Technology

2006-10-01

no person shall be subject to any penity for fallng to comply wih a collection of N ilo ration it does not display a currenty valid OMB control...work- aiding systems. Based on the design concept for a work- centered support system (WCSS), these software systems support user tasks and goals...through both direct and indirect aiding methods within the interface client. In order to ensure the coherent development and delivery of work- centered

Work-Based Mentor Training for Pennsylvania's School-to-Work System. Final Report.

ERIC Educational Resources Information Center

Walker, Thomas J.; And Others

Three Pennsylvania universities focused on defining the functional role and identifying the training needs of work-based mentors for Pennsylvania's system of school-to-work transition, in order to design a training protocol. Interviews were conducted with 81 experienced employees concerning their view of the mentoring role and the activities that…

Modality independence of order coding in working memory: Evidence from cross-modal order interference at recall.

PubMed

Vandierendonck, André

2016-01-01

Working memory researchers do not agree on whether order in serial recall is encoded by dedicated modality-specific systems or by a more general modality-independent system. Although previous research supports the existence of autonomous modality-specific systems, it has been shown that serial recognition memory is prone to cross-modal order interference by concurrent tasks. The present study used a serial recall task, which was performed in a single-task condition and in a dual-task condition with an embedded memory task in the retention interval. The modality of the serial task was either verbal or visuospatial, and the embedded tasks were in the other modality and required either serial or item recall. Care was taken to avoid modality overlaps during presentation and recall. In Experiment 1, visuospatial but not verbal serial recall was more impaired when the embedded task was an order than when it was an item task. Using a more difficult verbal serial recall task, verbal serial recall was also more impaired by another order recall task in Experiment 2. These findings are consistent with the hypothesis of modality-independent order coding. The implications for views on short-term recall and the multicomponent view of working memory are discussed.

A robust computational technique for model order reduction of two-time-scale discrete systems via genetic algorithms.

PubMed

Alsmadi, Othman M K; Abo-Hammour, Zaer S

2015-01-01

A robust computational technique for model order reduction (MOR) of multi-time-scale discrete systems (single input single output (SISO) and multi-input multioutput (MIMO)) is presented in this paper. This work is motivated by the singular perturbation of multi-time-scale systems where some specific dynamics may not have significant influence on the overall system behavior. The new approach is proposed using genetic algorithms (GA) with the advantage of obtaining a reduced order model, maintaining the exact dominant dynamics in the reduced order, and minimizing the steady state error. The reduction process is performed by obtaining an upper triangular transformed matrix of the system state matrix defined in state space representation along with the elements of B, C, and D matrices. The GA computational procedure is based on maximizing the fitness function corresponding to the response deviation between the full and reduced order models. The proposed computational intelligence MOR method is compared to recently published work on MOR techniques where simulation results show the potential and advantages of the new approach.

An error bound for a discrete reduced order model of a linear multivariable system

NASA Technical Reports Server (NTRS)

Al-Saggaf, Ubaid M.; Franklin, Gene F.

1987-01-01

The design of feasible controllers for high dimension multivariable systems can be greatly aided by a method of model reduction. In order for the design based on the order reduction to include a guarantee of stability, it is sufficient to have a bound on the model error. Previous work has provided such a bound for continuous-time systems for algorithms based on balancing. In this note an L-infinity bound is derived for model error for a method of order reduction of discrete linear multivariable systems based on balancing.

An intelligent healthcare management system: a new approach in work-order prioritization for medical equipment maintenance requests.

PubMed

Hamdi, Naser; Oweis, Rami; Abu Zraiq, Hamzeh; Abu Sammour, Denis

2012-04-01

The effective maintenance management of medical technology influences the quality of care delivered and the profitability of healthcare facilities. Medical equipment maintenance in Jordan lacks an objective prioritization system; consequently, the system is not sensitive to the impact of equipment downtime on patient morbidity and mortality. The current work presents a novel software system (EQUIMEDCOMP) that is designed to achieve valuable improvements in the maintenance management of medical technology. This work-order prioritization model sorts medical maintenance requests by calculating a priority index for each request. Model performance was assessed by utilizing maintenance requests from several Jordanian hospitals. The system proved highly efficient in minimizing equipment downtime based on healthcare delivery capacity, and, consequently, patient outcome. Additionally, a preventive maintenance optimization module and an equipment quality control system are incorporated. The system is, therefore, expected to improve the reliability of medical equipment and significantly improve safety and cost-efficiency.

Human action quality evaluation based on fuzzy logic with application in underground coal mining.

PubMed

Ionica, Andreea; Leba, Monica

2015-01-01

The work system is defined by its components, their roles and the relationships between them. Any work system gravitates around the human resource and the interdependencies between human factor and the other components of it. Researches in this field agreed that the human factor and its actions are difficult to quantify and predict. The objective of this paper is to apply a method of human actions evaluation in order to estimate possible risks and prevent possible system faults, both at human factor level and at equipment level. In order to point out the importance of the human factor influence on all the elements of the working systems we propose a fuzzy logic based methodology for quality evaluation of human actions. This methodology has a multidisciplinary character, as it gathers ideas and methods from: quality management, ergonomics, work safety and artificial intelligence. The results presented refer to a work system with a high degree of specificity, namely, underground coal mining and are valuable for human resources risk evaluation pattern. The fuzzy logic evaluation of the human actions leads to early detection of possible dangerous evolutions of the work system and alarm the persons in charge.

Virtual Control Systems Environment (VCSE)

ScienceCinema

Atkins, Will

2018-02-14

Will Atkins, a Sandia National Laboratories computer engineer discusses cybersecurity research work for process control systems. Will explains his work on the Virtual Control Systems Environment project to develop a modeling and simulation framework of the U.S. electric grid in order to study and mitigate possible cyberattacks on infrastructure.

On distribution reduction and algorithm implementation in inconsistent ordered information systems.

PubMed

Zhang, Yanqin

2014-01-01

As one part of our work in ordered information systems, distribution reduction is studied in inconsistent ordered information systems (OISs). Some important properties on distribution reduction are studied and discussed. The dominance matrix is restated for reduction acquisition in dominance relations based information systems. Matrix algorithm for distribution reduction acquisition is stepped. And program is implemented by the algorithm. The approach provides an effective tool for the theoretical research and the applications for ordered information systems in practices. For more detailed and valid illustrations, cases are employed to explain and verify the algorithm and the program which shows the effectiveness of the algorithm in complicated information systems.

Optimization of the Working Cycle for an Underwater Propulsion System Based on Aluminium-Water Combustion

NASA Astrophysics Data System (ADS)

Chen, Xianhe; Xia, Zhixun; Huang, Liya; Hu, Jianxin

2017-05-01

The working cycle of a novel underwater propulsion system based on aluminium combustion with water is researched in order to evaluate the best performance. The system exploits the exothermic reaction between aluminium and water which will produce high temperature, pressure steam and hydrogen mixture that can be used to drive turbine to generate power. Several new system configurations corresponding to different working cycles are investigated, and their performance parameters in terms of net power, energy density and global efficiency are discussed. The results of the system simulation show that using the recirculation steam rather than hydrogen as the carrier gas, the system net power, energy density and efficiency of the system are greatly increased compared, however the system performance is close either using adiabatic compression or isothermal compression. And if an evaporator component is added into system in order to take full use of the solid product heat, the system performance will be improved.

Shared processing in multiple object tracking and visual working memory in the absence of response order and task order confounds

PubMed Central

Howe, Piers D. L.

2017-01-01

To understand how the visual system represents multiple moving objects and how those representations contribute to tracking, it is essential that we understand how the processes of attention and working memory interact. In the work described here we present an investigation of that interaction via a series of tracking and working memory dual-task experiments. Previously, it has been argued that tracking is resistant to disruption by a concurrent working memory task and that any apparent disruption is in fact due to observers making a response to the working memory task, rather than due to competition for shared resources. Contrary to this, in our experiments we find that when task order and response order confounds are avoided, all participants show a similar decrease in both tracking and working memory performance. However, if task and response order confounds are not adequately controlled for we find substantial individual differences, which could explain the previous conflicting reports on this topic. Our results provide clear evidence that tracking and working memory tasks share processing resources. PMID:28410383

Shared processing in multiple object tracking and visual working memory in the absence of response order and task order confounds.

PubMed

Lapierre, Mark D; Cropper, Simon J; Howe, Piers D L

2017-01-01

To understand how the visual system represents multiple moving objects and how those representations contribute to tracking, it is essential that we understand how the processes of attention and working memory interact. In the work described here we present an investigation of that interaction via a series of tracking and working memory dual-task experiments. Previously, it has been argued that tracking is resistant to disruption by a concurrent working memory task and that any apparent disruption is in fact due to observers making a response to the working memory task, rather than due to competition for shared resources. Contrary to this, in our experiments we find that when task order and response order confounds are avoided, all participants show a similar decrease in both tracking and working memory performance. However, if task and response order confounds are not adequately controlled for we find substantial individual differences, which could explain the previous conflicting reports on this topic. Our results provide clear evidence that tracking and working memory tasks share processing resources.

Scheduling a Medium-Sized Manufacturing Shop: A Simulation Study

DTIC Science & Technology

1993-09-01

distinction, elements of work order data include: the minimum machine type required for a work order, as well as the prgramming , set-up, and machining... prevent this from happening. Such a mechanism could take the form of a reprioritization function that is executed after a specified period of time...system for a very long time unless some mechanism is used to prevent this from happening. The jobs left in the system will be the ones that have very

Conceptual Replaceability Analysis for Order and Standard Loan Tasks.

ERIC Educational Resources Information Center

California Univ., Santa Barbara. Library Systems Development Program.

Very preliminary systems concepts are presented for the Order and Standard Loan Subsystems. Each of the tasks defined for the current manual operations in (Library Systems Development) LSD 70-60 are evaluated against these concepts to determine how existing work will change when mechanized systems are installed. Then, utilizing this qualitative…

Dynamic Resource Allocation to Improve Service Performance in Order Fulfillment Systems

DTIC Science & Technology

2009-01-01

efficient system uses economies of scale at two points: orders are batched before processing, which reduces processing costs, and processed or- ders ...the ef- fects of batching on order picking processes is well-researched and well-understood ( van den Berg and Gademann, 1999). Because orders are...a final so- journ time distribution. Our work builds on existing research in matrix-geometric methods by Neuts (1981), Asmussen and M0ller (2001

48 CFR 42.1304 - Government delay of work.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Government delay of work... CONTRACT MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Suspension of Work, Stop-Work Orders, and Government Delay of Work 42.1304 Government delay of work. (a) The clause at 52.242-17, Government Delay of...

Itinerant ferromagnetism in fermionic systems with SP (2 N) symmetry

NASA Astrophysics Data System (ADS)

Yang, Wang; Wu, Congjun

The Ginzburg-Landau free energy of systems with SP (2 N) symmetry describes a second order phase transition on the mean field level, since the Casimir invariants of the SP (2 N) group can be only of even order combinations of the generators of the SP (2 N) group. This is in contrast with systems having the SU (N) symmetry, where the allowance of cubic term generally makes the phase transition into first order. In this work, we consider the Hertz-Millis type itinerant ferromagnetism in an interacting fermionic system with SP (2 N) symmetry, where the ferromagnetic orders are enriched by the multi-component nature of the system. The quantum criticality is discussed near the second order phase transition point.

48 CFR 2052.216-73 - Accelerated task order procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the work, the contractor shall proceed with performance of the task order subject to the monetary... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Accelerated task order....216-73 Accelerated task order procedures. As prescribed at 2016.506-70(b), the contracting officer may...

Multistrange Meson-Baryon Dynamics and Resonance Generation

NASA Astrophysics Data System (ADS)

Khemchandani, K. P.; Martínez Torres, A.; Hosaka, A.; Nagahiro, H.; Navarra, F. S.; Nielsen, M.

2018-05-01

In this talk I review our recent studies on meson-baryon systems with strangeness - 1 and - 2. The motivation of our works is to find resonances generated as a consequence of coupled channel meson-baryon interactions. The coupled channels are all meson-baryon systems formed by combining a pseudoscalar or a vector meson with an octet baryon such that the system has the strange quantum number equal to - 1 or - 2. The lowest order meson-baryon interaction amplitudes are obtained from Lagrangians based on the chiral and the hidden local symmetries related to the vector mesons working as the gauge bosons. These lowest order amplitudes are used as an input to solve the Bethe-Salpeter equation and a search for poles is made in the resulting amplitudes, in the complex plane. In case of systems with strangeness - 1, we find evidence for the existence of some hyperons such as: Λ(2000), Σ(1750), Σ(1940), Σ(2000). More recently, in the study of strangeness - 2 systems we have found two narrow resonances which can be related to Ξ (1690) and Ξ(2120). In this latter work, we have obtained the lowest order amplitudes relativistically as well as in the nonrelativistic approximation to solve the scattering equations. We find that the existence of the poles in the complex plane does not get affected by the computation of the scattering equation with the lowest order amplitudes obtained in the nonrelativistic approximation.

Intelligent Automatic Right-Left Sign Lamp Based on Brain Signal Recognition System

NASA Astrophysics Data System (ADS)

Winda, A.; Sofyan; Sthevany; Vincent, R. S.

2017-12-01

Comfort as a part of the human factor, plays important roles in nowadays advanced automotive technology. Many of the current technologies go in the direction of automotive driver assistance features. However, many of the driver assistance features still require physical movement by human to enable the features. In this work, the proposed method is used in order to make certain feature to be functioning without any physical movement, instead human just need to think about it in their mind. In this work, brain signal is recorded and processed in order to be used as input to the recognition system. Right-Left sign lamp based on the brain signal recognition system can potentially replace the button or switch of the specific device in order to make the lamp work. The system then will decide whether the signal is ‘Right’ or ‘Left’. The decision of the Right-Left side of brain signal recognition will be sent to a processing board in order to activate the automotive relay, which will be used to activate the sign lamp. Furthermore, the intelligent system approach is used to develop authorized model based on the brain signal. Particularly Support Vector Machines (SVMs)-based classification system is used in the proposed system to recognize the Left-Right of the brain signal. Experimental results confirm the effectiveness of the proposed intelligent Automatic brain signal-based Right-Left sign lamp access control system. The signal is processed by Linear Prediction Coefficient (LPC) and Support Vector Machines (SVMs), and the resulting experiment shows the training and testing accuracy of 100% and 80%, respectively.

Theorem Proving In Higher Order Logics

NASA Technical Reports Server (NTRS)

Carreno, Victor A. (Editor); Munoz, Cesar A.; Tahar, Sofiene

2002-01-01

The TPHOLs International Conference serves as a venue for the presentation of work in theorem proving in higher-order logics and related areas in deduction, formal specification, software and hardware verification, and other applications. Fourteen papers were submitted to Track B (Work in Progress), which are included in this volume. Authors of Track B papers gave short introductory talks that were followed by an open poster session. The FCM 2002 Workshop aimed to bring together researchers working on the formalisation of continuous mathematics in theorem proving systems with those needing such libraries for their applications. Many of the major higher order theorem proving systems now have a formalisation of the real numbers and various levels of real analysis support. This work is of interest in a number of application areas, such as formal methods development for hardware and software application and computer supported mathematics. The FCM 2002 consisted of three papers, presented by their authors at the workshop venue, and one invited talk.

High Performance Work and Learning Systems: Crafting a Worker-Centered Approach. Proceedings of a Conference (Washington, D.C., September 1991).

ERIC Educational Resources Information Center

Marschall, Daniel, Ed.

A consensus that unions must develop coherent and comprehensive policies on new work systems and continuous learning in order to guide local activities, was the central theme of this conference on the interrelated issues of the high performance work organization. These proceedings include the following presentations: "Labor's Stake in High…

WOGEN. Work Order Generation Macros for Word Perfect 6.X for Windows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grenz, G.

Included are three general WP macros (two independent and one multiple) and a template used at the Test Reactor Area (TRA) for the generation of the Work Orders (WO`s) used to perform corrective and preventative maintenance, as well as modifications of existing systems and installation of new systems. They incorporate facility specific requirements as well as selected federal/state orders. These macros are used to generate a WP document which is then converted into ASCII text for import to the maintenance software. Currently we are using MCRS but should be compatible with other platforms such as Passport. Reference the included filemore » Wogen.txt for installation and usage instructions.« less

Work Order Generation Macros for Word Perfect 6.X for Windows

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grenz, Gordon G.

Included are three general WP macros (two independent and one multiple) and a template used at the Test Reactor Area (TRA) for the generation of the Work Orders (WO's) used to perform corrective and preventative maintenance, as well as modifications of existing systems and installation of new systems. They incorporate facility specific requirements as well as selected federal/state orders. These macros are used to generate a WP document which is then converted into ASCII text for import to the maintenance software. Currently we are using MCRS but should be compatible with other platforms such as Passport. Reference the included filemore » Wogen.txt for installation and usage instructions.« less

RICOR K527 highly reliable linear cooler: applications and model overview

NASA Astrophysics Data System (ADS)

Riabzev, Sergey; Nachman, Ilan; Levin, Eli; Perach, Adam; Vainshtein, Igor; Gover, Dan

2017-05-01

The K527 linear cooler was developed in order to meet the requirements of reliability, cooling power needs and versatility for a wide range of applications such as hand held, 24/7 and MWS. During the recent years the cooler was incorporated in variety of systems. Some of these systems can be sensitive to vibrations which are induced from the cooler. In order to reduce those vibrations significantly, a Tuned Dynamic Absorber (TDA) was added to the cooler. Other systems, such as the MWS type, are not sensitive to vibrations, but require a robust cooler in order to meet the high demand for environmental vibration and temperature. Therefore various mounting interfaces are designed to meet system requirements. The latest K527 version was designed to be integrated with the K508 cold finger, in order to give it versatility to standard detectors that are already designed and available for the K508 cooler type. The reliability of the cooler is of a high priority. In order to meet the 30,000 working hours target, special design features were implemented. Eight K527 coolers have passed the 19,360 working hours without degradations, and are still running according to our expectations.

Multi-way chemometric methodologies and applications: a central summary of our research work.

PubMed

Wu, Hai-Long; Nie, Jin-Fang; Yu, Yong-Jie; Yu, Ru-Qin

2009-09-14

Multi-way data analysis and tensorial calibration are gaining widespread acceptance with the rapid development of modern analytical instruments. In recent years, our group working in State Key Laboratory of Chemo/Biosensing and Chemometrics in Hunan University has carried out exhaustive scientific research work in this area, such as building more canonical symbol systems, seeking the inner mathematical cyclic symmetry property for trilinear or multilinear decomposition, suggesting a series of multi-way calibration algorithms, exploring the rank estimation of three-way trilinear data array and analyzing different application systems. In this present paper, an overview from second-order data to third-order data covering about theories and applications in analytical chemistry has been presented.

10 Principles for Building a High-Quality System of Assessments

ERIC Educational Resources Information Center

Jobs for the Future, 2018

2018-01-01

Many states and districts are working toward developing and implementing high-quality systems that align assessments with each other, and to college and career readiness, and a comprehensive set of higher-order thinking skills. In order to support states, districts, and communities in this, the following 10 principles as guidance and common…

Advanced Vehicle Control Systems (Avcs) For Maintenance Vehicle Applications, Contract No. Dtfh61-94-C-00131, Work Order 11, Prepared For: Department Of Transportation

DOT National Transportation Integrated Search

1996-12-20

IT IS WIDELY BELIEVED THAT BARRIERS TO AN AUTOMATED HIGHWAY SYSTEM (AHS) : DEPLOYMENT ARE DUE MORE TO INSTITUTIONAL, ECONOMIC, AND LEGAL ISSUES THAN TECHNOLOGY LIMITATIONS. IN ORDER TO SUSTAIN AND ACCELERATE THE AHS DEPLOYMENT PROCESS, IT IS DESIRABL...

Intelligent Work Process Engineering System

NASA Technical Reports Server (NTRS)

Williams, Kent E.

2003-01-01

Optimizing performance on work activities and processes requires metrics of performance for management to monitor and analyze in order to support further improvements in efficiency, effectiveness, safety, reliability and cost. Information systems are therefore required to assist management in making timely, informed decisions regarding these work processes and activities. Currently information systems regarding Space Shuttle maintenance and servicing do not exist to make such timely decisions. The work to be presented details a system which incorporates various automated and intelligent processes and analysis tools to capture organize and analyze work process related data, to make the necessary decisions to meet KSC organizational goals. The advantages and disadvantages of design alternatives to the development of such a system will be discussed including technologies, which would need to bedesigned, prototyped and evaluated.

Quality and Safety in Health Care, Part XII: The Work System, Testing, and Clinical Reasoning.

PubMed

Harolds, Jay A

2016-07-01

Donabedian felt the 3 major components affecting quality were process, structure, and outcome. Later investigators often substitute the word "structure" for a broader concept called the "work system." One component of the latter is the people involved, and for diagnosis, this often is best done with a diagnostic team. The work system in diagnosis has many obstacles to achieve optimum performance. There are also important problems with how tests are ordered and interpreted and clinical reasoning and biases.

Computing and Interpreting Fisher Information as a Metric of Sustainability: Regime Changes in the United States Air Quality

EPA Science Inventory

As a key tool in information theory, Fisher Information has been used to explore the observable behavior of a variety of systems. In particular, recent work has demonstrated its ability to assess the dynamic order of real and model systems. However, in order to solidify the use o...

Moving Knowledge Around: Strategies for Fostering Equity within Educational Systems

ERIC Educational Resources Information Center

Ainscow, Mel

2012-01-01

This paper describes and analyses the work of a large scale improvement project in England in order to find more effective ways of fostering equity within education systems. The project involved an approach based on an analysis of local context, and used processes of networking and collaboration in order to make better use of available expertise.…

Problems of teaching students to use the featured technologies in the area of semantic web

NASA Astrophysics Data System (ADS)

Klimov, V. V.; Chernyshov, A. A.; Balandina, A. I.; Kostkina, A. D.

2017-01-01

The following paper contains the description of up-to-date technologies in the area of web-services development, service-oriented architecture and the Semantic Web. The paper contains the analysis of the most popular and widespread technologies and methods in the semantic web area which are used in the developed educational course. In the paper, we also describe the problem of teaching students to use these technologies and specify conditions for the creation of the learning and development course. We also describe the main exercise for personal work and skills, which all the students learning this course have to gain. Moreover, in the paper we specify the problem with software which students are going to use while learning this course. In order to solve this problem, we introduce the developing system which will be used to support the laboratory works. For this moment this system supports only the fourth work execution, but our following plans contain the expansion of the system in order to support the leftover works.

A Tribute to J. C. Sprott

NASA Astrophysics Data System (ADS)

Nazarimehr, Fahimeh; Jafari, Sajad; Chen, Guanrong; Kapitaniak, Tomasz; Kuznetsov, Nikolay V.; Leonov, Gennady A.; Li, Chunbiao; Wei, Zhouchao

2017-12-01

In honor of his 75th birthday, we review the prominent works of Professor Julien Clinton Sprott in chaos and nonlinear dynamics. We categorize his works into three important groups. The first and most important group is identifying new dynamical systems with special properties. He has proposed different chaotic maps, flows, complex variable systems, nonautonomous systems, partial differential equations, fractional-order systems, delay differential systems, spatiotemporal systems, artificial neural networks, and chaotic electrical circuits. He has also studied dynamical properties of complex systems such as bifurcations and basins of attraction. He has done work on generating fractal art. He has examined models of real-world systems that exhibit chaos. The second group of his works comprise control and synchronization of chaos. Finally, the third group is extracting dynamical properties of systems using time-series analysis. This paper highlights the impact of Sprott’s work on the promotion of nonlinear dynamics.

First-order approximation error analysis of Risley-prism-based beam directing system.

PubMed

Zhao, Yanyan; Yuan, Yan

2014-12-01

To improve the performance of a Risley-prism system for optical detection and measuring applications, it is necessary to be able to determine the direction of the outgoing beam with high accuracy. In previous works, error sources and their impact on the performance of the Risley-prism system have been analyzed, but their numerical approximation accuracy was not high. Besides, pointing error analysis of the Risley-prism system has provided results for the case when the component errors, prism orientation errors, and assembly errors are certain. In this work, the prototype of a Risley-prism system was designed. The first-order approximations of the error analysis were derived and compared with the exact results. The directing errors of a Risley-prism system associated with wedge-angle errors, prism mounting errors, and bearing assembly errors were analyzed based on the exact formula and the first-order approximation. The comparisons indicated that our first-order approximation is accurate. In addition, the combined errors produced by the wedge-angle errors and mounting errors of the two prisms together were derived and in both cases were proved to be the sum of errors caused by the first and the second prism separately. Based on these results, the system error of our prototype was estimated. The derived formulas can be implemented to evaluate beam directing errors of any Risley-prism beam directing system with a similar configuration.

Computerised Order Entry Systems and Pathology Services - A Synthesis of the Evidence

PubMed Central

Georgiou, Andrew; Westbrook, Johanna I

2006-01-01

Computerised Physician Order Entry (CPOE) systems have been promoted in Australia and internationally for their potential to improve the quality of care. The existing research of the effect of CPOE on pathology laboratories has been variable, pointing to the potential to increase efficiency and effectiveness and contribute to enhancing the quality of patient care on the one hand, while leading to significant disruptions in work organisation with a negative impact on departmental relations on the other hand. In this paper we provide an overview of the research evidence about the impact of CPOE on four areas associated with pathology services; a) efficiency of the ordering process, e.g. test turnaround times, b) effectiveness as measured by test ordering volumes and test order appropriateness, c) quality of care, particularly its effects on patient care and d) work organisation patterns, which can be severely disrupted by CPOE. We discuss the possible ramifications of CPOE and offer three broad, but important recommendations for pathology laboratories, based on our own research experience investigating CPOE implementations over three years. Firstly, pathology laboratories need to be active participants in planning the implementation of CPOE. Secondly, the importance of building a firm organisational foundation for the introduction of the new system that includes openness and responsiveness to feedback. And thirdly, the implementation process needs to be underpinned by a strong commitment to a multi-method evaluation at every stage of the process to be able to measure the impact of the system on work practices and outcomes. PMID:17077878

Fermionic topological quantum states as tensor networks

NASA Astrophysics Data System (ADS)

Wille, C.; Buerschaper, O.; Eisert, J.

2017-06-01

Tensor network states, and in particular projected entangled pair states, play an important role in the description of strongly correlated quantum lattice systems. They do not only serve as variational states in numerical simulation methods, but also provide a framework for classifying phases of quantum matter and capture notions of topological order in a stringent and rigorous language. The rapid development in this field for spin models and bosonic systems has not yet been mirrored by an analogous development for fermionic models. In this work, we introduce a tensor network formalism capable of capturing notions of topological order for quantum systems with fermionic components. At the heart of the formalism are axioms of fermionic matrix-product operator injectivity, stable under concatenation. Building upon that, we formulate a Grassmann number tensor network ansatz for the ground state of fermionic twisted quantum double models. A specific focus is put on the paradigmatic example of the fermionic toric code. This work shows that the program of describing topologically ordered systems using tensor networks carries over to fermionic models.

Instabilities and diffusion in a hydrodynamic model of a fluid membrane coupled to a thin active fluid layer.

PubMed

Sarkar, N; Basu, A

2012-11-01

We construct a coarse-grained effective two-dimensional (2d hydrodynamic theory as a theoretical model for a coupled system of a fluid membrane and a thin layer of a polar active fluid in its ordered state that is anchored to the membrane. We show that such a system is prone to generic instabilities through the interplay of nonequilibrium drive, polar order and membrane fluctuation. We use our model equations to calculate diffusion coefficients of an inclusion in the membrane and show that their values depend strongly on the system size, in contrast to their equilibrium values. Our work extends the work of S. Sankararaman and S. Ramaswamy (Phys. Rev. Lett., 102, 118107 (2009)) to a coupled system of a fluid membrane and an ordered active fluid layer. Our model is broadly inspired by and should be useful as a starting point for theoretical descriptions of the coupled dynamics of a cell membrane and a cortical actin layer anchored to it.

Modeling and Analysis of a Fractional-Order Generalized Memristor-Based Chaotic System and Circuit Implementation

NASA Astrophysics Data System (ADS)

Yang, Ningning; Xu, Cheng; Wu, Chaojun; Jia, Rong; Liu, Chongxin

2017-12-01

Memristor is a nonlinear “missing circuit element”, that can easily achieve chaotic oscillation. Memristor-based chaotic systems have received more and more attention. Research shows that fractional-order systems are more close to real systems. As an important parameter, the order can increase the flexibility and degree of freedom of the system. In this paper, a fractional-order generalized memristor, which consists of a diode bridge and a parallel circuit with an equivalent unit circuit and a linear resistance, is proposed. Frequency and electrical characteristics of the fractional-order memristor are analyzed. A chain structure circuit is used to implement the fractional-order unit circuit. Then replacing the conventional Chua’s diode by the fractional-order generalized memristor, a fractional-order memristor-based chaotic circuit is proposed. A large amount of research work has been done to investigate the influence of the order on the dynamical behaviors of the fractional-order memristor-based chaotic circuit. Varying with the order, the system enters the chaotic state from the periodic state through the Hopf bifurcation and period-doubling bifurcation. The chaotic state of the system has two types of attractors: single-scroll and double-scroll attractor. The stability theory of fractional-order systems is used to determine the minimum order occurring Hopf bifurcation. And the influence of the initial value on the system is analyzed. Circuit simulations are designed to verify the results of theoretical analysis and numerical simulation.

Feasibility of self-correcting quantum memory and thermal stability of topological order

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoshida, Beni, E-mail: rouge@mit.edu

2011-10-15

Recently, it has become apparent that the thermal stability of topologically ordered systems at finite temperature, as discussed in condensed matter physics, can be studied by addressing the feasibility of self-correcting quantum memory, as discussed in quantum information science. Here, with this correspondence in mind, we propose a model of quantum codes that may cover a large class of physically realizable quantum memory. The model is supported by a certain class of gapped spin Hamiltonians, called stabilizer Hamiltonians, with translation symmetries and a small number of ground states that does not grow with the system size. We show that themore » model does not work as self-correcting quantum memory due to a certain topological constraint on geometric shapes of its logical operators. This quantum coding theoretical result implies that systems covered or approximated by the model cannot have thermally stable topological order, meaning that systems cannot be stable against both thermal fluctuations and local perturbations simultaneously in two and three spatial dimensions. - Highlights: > We define a class of physically realizable quantum codes. > We determine their coding and physical properties completely. > We establish the connection between topological order and self-correcting memory. > We find they do not work as self-correcting quantum memory. > We find they do not have thermally stable topological order.« less

Computerized physician order entry from a chief information officer perspective.

PubMed

Cotter, Carole M

2004-12-01

Designing and implementing a computerized physician order entry system in the critical care units of a large urban hospital system is an enormous undertaking. With their significant potential to improve health care and significantly reduce errors, the time for computerized physician order entry or physician order management systems is past due. Careful integrated planning is the key to success, requiring multidisciplinary teams at all levels of clinical and administrative management to work together. Articulated from the viewpoint of the Chief Information Officer of Lifespan, a not-for-profit hospital system in Rhode Island, the vision and strategy preceding the information technology plan, understanding the system's current state, the gap analysis between current and future state, and finally, building and implementing the information technology plan are described.

Universals of Word Order in Esperanto. Lektos: Interdisciplinary Working Papers in Language Sciences, Vol. 3, No. 2.

ERIC Educational Resources Information Center

St. Clair, Robert N.

The contention that Esperanto is a natural linguistic system is discussed. Research is cited concerning universals of word order, dominant word order, polar type languages, Esperanto as a verb-subject-object language, and gapping in Esperanto. It is concluded that contrary to grammatical tradition, word order is not and cannot be completely free.…

Single-photon driven high-order sideband transitions in an ultrastrongly coupled circuit quantum electrodynamics system

NASA Astrophysics Data System (ADS)

Li, Tiefu; Chen, Zhen; Wang, Yimin; Tian, Lin; Qiu, Yueyin; Inomata, Kunihiro; Yoshihara, Fumiki; Han, Siyuan; Nori, Franco; Tsai, Jaw-Shen; You, J. Q.

We report the experimental observation of high-order sideband transitions at the single-photon level in a quantum circuit system of a flux qubit ultrastrongly coupled to a coplanar waveguide resonator. With the coupling strength reaching 10 % of the resonator's fundamental frequency, we obtain clear signatures of higher-order red- and first-order blue-sideband transitions. These transitions are owing to the ultrastrong Rabi coupling, instead of the driving power. Our observation advances the understanding of ultrastrongly-coupled systems and paves the way to study high-order processes in the quantum Rabi model. This work is supported by the National Basic Research Program of China and the National Natural Science Foundation of China.

Space station WP-04 power system preliminary analysis and design document, volume 3

NASA Technical Reports Server (NTRS)

1986-01-01

Rocketdyne plans to generate a system level specification for the Space Station Electric Power System (EPS) in order to facilitate the usage, accountability, and tracking of overall system level requirements. The origins and status of the verification planning effort are traced and an overview of the Space Station program interactions are provided. The work package level interfaces between the EPS and the other Space Station work packages are outlined. A trade study was performed to determine the peaking split between PV and SD, and specifically to compare the inherent total peaking capability with proportionally shared peaking. In order to determine EPS cost drivers for the previous submittal of DRO2, the life cycle cost (LCC) model was run to identify the more significant costs and the factors contributing to them.

Order of the major constituents in sign languages: implications for all language

PubMed Central

Napoli, Donna Jo; Sutton-Spence, Rachel

2014-01-01

A survey of reports of sign order from 42 sign languages leads to a handful of generalizations. Two accounts emerge, one amodal and the other modal. We argue that universal pressures are at work with respect to some generalizations, but that pressure from the visual modality is at work with respect to others. Together, these pressures conspire to make all sign languages order their major constituents SOV or SVO. This study leads us to the conclusion that the order of S with regard to verb phrase (VP) may be driven by sensorimotor system concerns that feed universal grammar. PMID:24860523

Evaluation of tocopherol recovery through simulation of molecular distillation process.

PubMed

Moraes, E B; Batistella, C B; Alvarez, M E Torres; Filho, Rubens Maciel; Maciel, M R Wolf

2004-01-01

DISMOL simulator was used to determine the best possible operating conditions to guide, in future studies, experimental works. This simulator needs several physical-chemical properties and often it is very difficult to determine them because of the complexity of the involved components. Their determinations must be made through correlations and/or predictions, in order to characterize the system and calculate it. The first try is to have simulation results of a system that later can be validated with experimental data. To implement, in the simulator, the necessary parameters of complex systems is a difficult task. In this work, we aimed to determe these properties in order to evaluate the tocopherol (vitamin E) recovery using a DISMOL simulator. The raw material used was the crude deodorizer distillate of soya oil. With this procedure, it is possible to determine the best operating conditions for experimental works and to evaluate the process in the separation of new systems, analyzing the profiles obtained from these simulations for the falling film molecular distillator.

Design of embedded intelligent monitoring system based on face recognition

NASA Astrophysics Data System (ADS)

Liang, Weidong; Ding, Yan; Zhao, Liangjin; Li, Jia; Hu, Xuemei

2017-01-01

In this paper, a new embedded intelligent monitoring system based on face recognition is proposed. The system uses Pi Raspberry as the central processor. A sensors group has been designed with Zigbee module in order to assist the system to work better and the two alarm modes have been proposed using the Internet and 3G modem. The experimental results show that the system can work under various light intensities to recognize human face and send alarm information in real time.

48 CFR 217.7103-3 - Solicitations for job orders.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Solicitations for job... Master Agreement for Repair and Alteration of Vessels 217.7103-3 Solicitations for job orders. (a) When a... perform the work and agree to execute a master agreement before award of a job order. (b) Follow the...

48 CFR 217.7103-3 - Solicitations for job orders.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Solicitations for job... Master Agreement for Repair and Alteration of Vessels 217.7103-3 Solicitations for job orders. (a) When a... perform the work and agree to execute a master agreement before award of a job order. (b) Follow the...

48 CFR 217.7103-3 - Solicitations for job orders.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Solicitations for job... Master Agreement for Repair and Alteration of Vessels 217.7103-3 Solicitations for job orders. (a) When a... perform the work and agree to execute a master agreement before award of a job order. (b) Follow the...

48 CFR 217.7103-3 - Solicitations for job orders.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Solicitations for job... Master Agreement for Repair and Alteration of Vessels 217.7103-3 Solicitations for job orders. (a) When a... perform the work and agree to execute a master agreement before award of a job order. (b) Follow the...

48 CFR 217.7103-3 - Solicitations for job orders.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Solicitations for job... Master Agreement for Repair and Alteration of Vessels 217.7103-3 Solicitations for job orders. (a) When a... perform the work and agree to execute a master agreement before award of a job order. (b) Follow the...

Integration of a CAS/DGS as a CAD System in the Mathematics Curriculum for Architecture Students

ERIC Educational Resources Information Center

Falcon, R. M.

2011-01-01

Students of Architecture and Building Engineering Degrees work with Computer Aided Design systems daily in order to design and model architectonic constructions. Since this kind of software is based on the creation and transformation of geometrical objects, it seems to be a useful tool in Maths classes in order to capture the attention of the…

Systematic analysis of EOS data system for operations

NASA Technical Reports Server (NTRS)

Moe, K. L.; Dasgupta, R.

1985-01-01

A data management analysis methodology is being proposed. The objective of the methodology is to assist mission managers by identifying a series of ordered activities to be systematically followed in order to arrive at an effective ground system design. Existing system engineering tools and concepts have been assembled into a structured framework to facilitate the work of a mission planner. It is intended that this methodology can be gainfully applied (with probable modifications and/or changes) to the EOS payloads and their associated data systems.

A method for work modeling at complex systems: towards applying information systems in family health care units.

PubMed

Jatobá, Alessandro; de Carvalho, Paulo Victor R; da Cunha, Amauri Marques

2012-01-01

Work in organizations requires a minimum level of consensus on the understanding of the practices performed. To adopt technological devices to support the activities in environments where work is complex, characterized by the interdependence among a large number of variables, understanding about how work is done not only takes an even greater importance, but also becomes a more difficult task. Therefore, this study aims to present a method for modeling of work in complex systems, which allows improving the knowledge about the way activities are performed where these activities do not simply happen by performing procedures. Uniting techniques of Cognitive Task Analysis with the concept of Work Process, this work seeks to provide a method capable of providing a detailed and accurate vision of how people perform their tasks, in order to apply information systems for supporting work in organizations.

Peptide π-Electron Conjugates: Organic Electronics for Biology?

PubMed

Ardoña, Herdeline Ann M; Tovar, John D

2015-12-16

Highly ordered arrays of π-conjugated molecules are often viewed as a prerequisite for effective charge-transporting materials. Studies involving these materials have traditionally focused on organic electronic devices, with more recent emphasis on biological systems. In order to facilitate the transition to biological environments, biomolecules that can promote hierarchical ordering and water solubility are often covalently appended to the π-electron unit. This review highlights recent work on π-conjugated systems bound to peptide moieties that exhibit self-assembly and aims to provide an overview on the development and emerging applications of peptide-based supramolecular π-electron systems.

48 CFR 43.203 - Change order accounting procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

...., engineering costs and costs of obsolete or reperformed work). (2) Costs of added distinct work caused by the...) Contractors' accounting systems are seldom designed to segregate the costs of performing changed work... possible need to revise their accounting procedures to comply with the cost segregation requirements of the...

48 CFR 43.203 - Change order accounting procedures.

Code of Federal Regulations, 2014 CFR

2014-10-01

...., engineering costs and costs of obsolete or reperformed work). (2) Costs of added distinct work caused by the...) Contractors' accounting systems are seldom designed to segregate the costs of performing changed work... possible need to revise their accounting procedures to comply with the cost segregation requirements of the...

48 CFR 43.203 - Change order accounting procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

...., engineering costs and costs of obsolete or reperformed work). (2) Costs of added distinct work caused by the...) Contractors' accounting systems are seldom designed to segregate the costs of performing changed work... possible need to revise their accounting procedures to comply with the cost segregation requirements of the...

48 CFR 43.203 - Change order accounting procedures.

Code of Federal Regulations, 2012 CFR

2012-10-01

...., engineering costs and costs of obsolete or reperformed work). (2) Costs of added distinct work caused by the...) Contractors' accounting systems are seldom designed to segregate the costs of performing changed work... possible need to revise their accounting procedures to comply with the cost segregation requirements of the...

33 CFR 105.250 - Security systems and equipment maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... systems must be regularly tested in accordance with the manufacturers' recommendations; noted deficiencies... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Security systems and equipment... systems and equipment maintenance. (a) Security systems and equipment must be in good working order and...

What Is an Activity? Appropriating an Activity-Centric System

NASA Astrophysics Data System (ADS)

Yarosh, Svetlana; Matthews, Tara; Moran, Thomas P.; Smith, Barton

Activity-Centric Computing (ACC) systems seek to address the fragmentation of office work across tools and documents by allowing users to organize work around the computational construct of an Activity. Defining and structuring appropriate Activities within a system poses a challenge for users that must be overcome in order to benefit from ACC support. We know little about how knowledge workers appropriate the Activity construct. To address this, we studied users’ appropriation of a production-quality ACC system, Lotus Activities, for everyday work by employees in a large corporation. We contribute to a better understanding of how users articulate their individual and collaborative work in the system by providing empirical evidence of their patterns of appropriation. We conclude by discussing how our findings can inform the design of other ACC systems for the workplace.

Creating Resilient IT: How the Sign-Out Sheet Shows Clinicians Make Healthcare Work

PubMed Central

Nemeth, Christopher; Nunnally, Mark; O’Connor, Michael; Cook, Richard

2006-01-01

Information technology (IT) systems have been described as brittle and prone to automation surprises. Recent report of information system failure, particularly computerized physician order entry (CPOE) systems, shows the result of IT failure in actual practice. Such mismatches with healthcare work requirements necessitate improvement to IT research and development. Efforts to develop successful IT systems for healthcare’s sharp end must incorporate properties that reflect workers’ initiative in respose to domain constraints. Resilience is the feature of some systems that makes it possible for them to respond to sudden, unanticipated demands for performance and return to normal operation quickly, with minimum decrement in performance. Workers create resilience at healthcare’s sharp end by daily confronting constraints and obstacles that need to be surmounted in order to accomplish results. The sign-out sheet is an example of resilience that can be used to guide IT development. PMID:17238408

Cooperative Monocular-Based SLAM for Multi-UAV Systems in GPS-Denied Environments †

PubMed Central

Guerra, Edmundo

2018-01-01

This work presents a cooperative monocular-based SLAM approach for multi-UAV systems that can operate in GPS-denied environments. The main contribution of the work is to show that, using visual information obtained from monocular cameras mounted onboard aerial vehicles flying in formation, the observability properties of the whole system are improved. This fact is especially notorious when compared with other related visual SLAM configurations. In order to improve the observability properties, some measurements of the relative distance between the UAVs are included in the system. These relative distances are also obtained from visual information. The proposed approach is theoretically validated by means of a nonlinear observability analysis. Furthermore, an extensive set of computer simulations is presented in order to validate the proposed approach. The numerical simulation results show that the proposed system is able to provide a good position and orientation estimation of the aerial vehicles flying in formation. PMID:29701722

Cooperative Monocular-Based SLAM for Multi-UAV Systems in GPS-Denied Environments.

PubMed

Trujillo, Juan-Carlos; Munguia, Rodrigo; Guerra, Edmundo; Grau, Antoni

2018-04-26

This work presents a cooperative monocular-based SLAM approach for multi-UAV systems that can operate in GPS-denied environments. The main contribution of the work is to show that, using visual information obtained from monocular cameras mounted onboard aerial vehicles flying in formation, the observability properties of the whole system are improved. This fact is especially notorious when compared with other related visual SLAM configurations. In order to improve the observability properties, some measurements of the relative distance between the UAVs are included in the system. These relative distances are also obtained from visual information. The proposed approach is theoretically validated by means of a nonlinear observability analysis. Furthermore, an extensive set of computer simulations is presented in order to validate the proposed approach. The numerical simulation results show that the proposed system is able to provide a good position and orientation estimation of the aerial vehicles flying in formation.

Integrated Cost Accounting System.

DTIC Science & Technology

1992-07-27

D., Srikant M. Datar, and Sunder Kekre . "Relevant Costs, Congestion, and Stochasticity in Production Environments." unpublished working paper...School, 1984. 113 Kekre , Sunder . "Strategic Consideration of Order Flexibility, Costs, and Delivery in Long-Term Contracts." Unpublished Working Paper

The Quality of Work in the Belgian Service Voucher System.

PubMed

Mousaid, Sarah; Huegaerts, Kelly; Bosmans, Kim; Julià, Mireia; Benach, Joan; Vanroelen, Christophe

2017-01-01

Several European countries implemented initiatives to boost the growth of the domestic cleaning sector. Few studies investigated the quality of work in these initiatives, although effects on workers' health and on social health inequalities can be expected. This study contributes to the scant research on this subject, by investigating the quality of work in the Belgian service voucher system - a subsidized system for domestic work. The applied research methodology includes a qualitative content analysis of parliamentary debates, legislation and previous research about the service voucher system and of 40 in-depth interviews with service voucher workers. The study shows that the legal framework that regulates the system must be further enhanced in order to improve the quality of work in the service voucher system. In addition, the actors involved must be better controlled, and sanctioned in case of non-compliance with legislation. © The Author(s) 2016.

[Work schedules in the Hungarian health care system and the sleep quality of nurses].

PubMed

Fusz, Katalin; Pakai, Annamária; Kívés, Zsuzsanna; Szunomár, Szilvia; Regős, Annamária; Oláh, András

2016-03-06

One way of ensuring the continuity of health care is the shift work, which is burdensome and it can lead to sleep disturbances. The aim of the study was to measure the typical Hungarian nursing shift systems in hospitals, to analyse the causes of irregular work schedules, and to compare the sleep quality of nurses in different work schedules. 236 head nurses filled out the national online survey, and 217 nurses in clinics of the University of Pécs filled the Hungarian version of Bergen Shift Work Sleep Questionnaire. The head nurses provided data of 8697 nurses's schedules. 51.89% of nurses work in flexible shift system. 1944 employees work in regular shift system, most of them in the following order: 12-hour day shift and 12-hour night shift, followed by a one- or two-day rest. Where there is no system of shifts, the most frequent causes are the needs of nurses and the nurse shortage. Nurses who are working in irregular shift system had worse sleep quality than nurses who are working in flexible and regular shift system (p = 0.044). It would be helpful if the least burdensome shift system could be established.

Virtual microphone sensing through vibro-acoustic modelling and Kalman filtering

NASA Astrophysics Data System (ADS)

van de Walle, A.; Naets, F.; Desmet, W.

2018-05-01

This work proposes a virtual microphone methodology which enables full field acoustic measurements for vibro-acoustic systems. The methodology employs a Kalman filtering framework in order to combine a reduced high-fidelity vibro-acoustic model with a structural excitation measurement and small set of real microphone measurements on the system under investigation. By employing model order reduction techniques, a high order finite element model can be converted in a much smaller model which preserves the desired accuracy and maintains the main physical properties of the original model. Due to the low order of the reduced-order model, it can be effectively employed in a Kalman filter. The proposed methodology is validated experimentally on a strongly coupled vibro-acoustic system. The virtual sensor vastly improves the accuracy with respect to regular forward simulation. The virtual sensor also allows to recreate the full sound field of the system, which is very difficult/impossible to do through classical measurements.

33 CFR 104.260 - Security systems and equipment maintenance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Security systems and equipment... systems and equipment maintenance. (a) Security systems and equipment must be in good working order and inspected, tested, calibrated and maintained according to the manufacturer's recommendation. (b) The results...

MAINTENANCE MANAGEMENT ACCOUNTING SYSTEM OF WASTE WATER DISPOSAL SYSTEMS

NASA Astrophysics Data System (ADS)

Hori, Michihiro; Tsuruta, Takashi; Kaito, Kiyoyuki; Kobayashi, Kiyoshi

Sewage works facilities consist of various assets groups. And there are many kinds of financial resources. In order to optimize the maintenance plan, and to secure the stability and sustainability of sewage works management, it is necessary to carry out financial simulation based on the life-cycle cost analysis. Furthermore, it is important to develop management accounting system that is interlinked with the financial accounting system, because many sewage administration bodies have their financial accounting systems as public enterprises. In this paper, a management accounting system, which is designed to provide basic information for asset management of sewage works facilities, is presented. Also the applicability of the management accounting system presented in this paper is examined through financial simulations.

Extending the TSP to Systems Engineering: Early Results from Team Process Integration

DTIC Science & Technology

2010-08-01

within ±10 percent of what was planned, and there were no high-priority problem reports coming out of test. Employee Work / Life Balance TPI helped improve...employee work / life balance . In order to get their job done before implementing TPI, employees rou- tinely worked overtime. With TPI (and in COMING

Working Towards Führer: A Chaotic View

NASA Astrophysics Data System (ADS)

Cakar, Ulas

Leadership is a concept that has been discussed since the beginning of history. Even though there have been many theories in the field accepting leadership's role in bringing order, chaotic aspects of leadership are generally neglected. This chapter aims to examine the leadership beyond an orderly interpretation of universe. For this purpose, Third Reich period and leadership during this period will be examined. Ian Kershaw's "Working Towards Führer" concept provides a unique understanding of leadership concept. It goes beyond the dualist depiction of Third Reich, it does not state Adolf Hitler as an all powerful dictator, or a weak one. Rather, he expresses that due to the conditions in the Third Reich, Adolf Hitler was both of this. This complex situation can be understood deeper when it is examined through the lens of chaos theory. This study contributes to the field by being the first in using chaos theory for examining "Working Towards Führer" concept and its development. Seemingly orderly nature of synchronization process and its vortex will be shown. Adolf Hitler's storm spot position in the chaotic system and its dynamics are explained. War's entropic power and its effect on the downfall of the system is crucial in understanding this unique chaotic system. The chaotic pattern of "Working Towards Führer" offers an opportunity to analyze the complexities of the leadership concept.

Design of a compensation for an ARMA model of a discrete time system. M.S. Thesis

NASA Technical Reports Server (NTRS)

Mainemer, C. I.

1978-01-01

The design of an optimal dynamic compensator for a multivariable discrete time system is studied. Also the design of compensators to achieve minimum variance control strategies for single input single output systems is analyzed. In the first problem the initial conditions of the plant are random variables with known first and second order moments, and the cost is the expected value of the standard cost, quadratic in the states and controls. The compensator is based on the minimum order Luenberger observer and it is found optimally by minimizing a performance index. Necessary and sufficient conditions for optimality of the compensator are derived. The second problem is solved in three different ways; two of them working directly in the frequency domain and one working in the time domain. The first and second order moments of the initial conditions are irrelevant to the solution. Necessary and sufficient conditions are derived for the compensator to minimize the variance of the output.

Estimating distributions with increasing failure rate in an imperfect repair model.

PubMed

Kvam, Paul H; Singh, Harshinder; Whitaker, Lyn R

2002-03-01

A failed system is repaired minimally if after failure, it is restored to the working condition of an identical system of the same age. We extend the nonparametric maximum likelihood estimator (MLE) of a system's lifetime distribution function to test units that are known to have an increasing failure rate. Such items comprise a significant portion of working components in industry. The order-restricted MLE is shown to be consistent. Similar results hold for the Brown-Proschan imperfect repair model, which dictates that a failed component is repaired perfectly with some unknown probability, and is otherwise repaired minimally. The estimators derived are motivated and illustrated by failure data in the nuclear industry. Failure times for groups of emergency diesel generators and motor-driven pumps are analyzed using the order-restricted methods. The order-restricted estimators are consistent and show distinct differences from the ordinary MLEs. Simulation results suggest significant improvement in reliability estimation is available in many cases when component failure data exhibit the IFR property.

Design of an Intelligent Nursing Clinical Pathway and Nursing Order Support System for Traditional Chinese Medicine.

PubMed

Ding, Bao-Fen; Chang, Polun; Wang, Ping; Li, Hai-Ting; Kuo, Ming-Chuan

2017-01-01

With an in-depth analysis of nursing work in 14 hospitals over a period of two years, one unique total nursing information system framework was established where the nursing clinical pathways are used as the main frame and the nursing orders as the nodes on the frame. We used the nursing order concept with the principles of nursing process. A closed-loop management model composed of the nursing orders was set up to solve nursing problems. Based on the principles of traditional Chinese medicine, we further designed an intelligent support module to automatically deduct clinical nursing pathways to promote standardized management and improve the quality of nursing care. The system has successfully been implemented in some facilities since 2015.

Computer-based physician order entry: the state of the art.

PubMed Central

Sittig, D F; Stead, W W

1994-01-01

Direct computer-based physician order entry has been the subject of debate for over 20 years. Many sites have implemented systems successfully. Others have failed outright or flirted with disaster, incurring substantial delays, cost overruns, and threatened work actions. The rationale for physician order entry includes process improvement, support of cost-conscious decision making, clinical decision support, and optimization of physicians' time. Barriers to physician order entry result from the changes required in practice patterns, roles within the care team, teaching patterns, and institutional policies. Key ingredients for successful implementation include: the system must be fast and easy to use, the user interface must behave consistently in all situations, the institution must have broad and committed involvement and direction by clinicians prior to implementation, the top leadership of the organization must be committed to the project, and a group of problem solvers and users must meet regularly to work out procedural issues. This article reviews the peer-reviewed scientific literature to present the current state of the art of computer-based physician order entry. PMID:7719793

Water-saving liquid-gas conditioning system

DOEpatents

Martin, Christopher; Zhuang, Ye

2014-01-14

A method for treating a process gas with a liquid comprises contacting a process gas with a hygroscopic working fluid in order to remove a constituent from the process gas. A system for treating a process gas with a liquid comprises a hygroscopic working fluid comprising a component adapted to absorb or react with a constituent of a process gas, and a liquid-gas contactor for contacting the working fluid and the process gas, wherein the constituent is removed from the process gas within the liquid-gas contactor.

Predicting the Crystal Structure and Phase Transitions in High-Entropy Alloys

NASA Astrophysics Data System (ADS)

King, D. M.; Middleburgh, S. C.; Edwards, L.; Lumpkin, G. R.; Cortie, M.

2015-06-01

High-entropy alloys (HEAs) have advantageous properties compared with other systems as a result of their chemistry and crystal structure. The transition between a face-centered cubic (FCC) and body-centered cubic (BCC) structure in the Al x CoCrFeNi high-entropy alloy system has been investigated on the atomic scale in this work. The Al x CoCrFeNi system, as well as being a useful system itself, can also be considered a model HEA material. Ordering in the FCC structure was investigated, and an order-disorder transition was predicted at ~600 K. It was found that, at low temperatures, an ordered lattice is favored over a truly random lattice. The fully disordered BCC structure was found to be unstable. When partial ordering was imposed (lowering the symmetry), with Al and Ni limited specific sites of the BCC system, the BCC packing was stabilized. Decomposition of the ordered BCC single phase into a dual phase (Al-Ni rich and Fe-Cr rich) is also considered.

41 CFR 101-39.104 - Notice of establishment of a fleet management system.

Code of Federal Regulations, 2014 CFR

2014-07-01

... management system in order to work out any problems pertaining to establishing and operating fleet management... of a fleet management system. 101-39.104 Section 101-39.104 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS AVIATION...

41 CFR 101-39.104 - Notice of establishment of a fleet management system.

Code of Federal Regulations, 2011 CFR

2011-07-01

... management system in order to work out any problems pertaining to establishing and operating fleet management... of a fleet management system. 101-39.104 Section 101-39.104 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS AVIATION...

41 CFR 101-39.104 - Notice of establishment of a fleet management system.

Code of Federal Regulations, 2013 CFR

2013-07-01

... management system in order to work out any problems pertaining to establishing and operating fleet management... of a fleet management system. 101-39.104 Section 101-39.104 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS AVIATION...

41 CFR 101-39.104 - Notice of establishment of a fleet management system.

Code of Federal Regulations, 2012 CFR

2012-07-01

... management system in order to work out any problems pertaining to establishing and operating fleet management... of a fleet management system. 101-39.104 Section 101-39.104 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS AVIATION...

Transitions induced by speed in self-propelled particles system with attractive interactions

NASA Astrophysics Data System (ADS)

Cambui, Dorilson. S.; Rosas, Alexandre

2018-05-01

In this work, we consider a system of self-propelled particles with attractive interactions in two dimensions. The model presents an order-disorder transition with the speed playing the role of the control parameter. In order to characterize the transition, we investigate the behavior of the order parameter and the Binder cumulant as a function of the speed. Our main finding is that the transition can be either continuous or discontinuous depending on two parameter of the model: the strength of the noise and the radius of attraction.

I Am Working for ___: Successfully Using Token Reward Systems

ERIC Educational Resources Information Center

Diamond, Gwendolyn P.; Da Fonte, M. Alexandra; Boesch, Miriam C.

2015-01-01

The use of these systems can enhance students' participation in instructional activities. However, to use token systems effectively, the system must be individualized and tailored to meet the needs of the child. In order to individualize the token system for each student, teachers should (1) identify an array of back-up reinforcers for the…

Advanced Computer Image Generation Techniques Exploiting Perceptual Characteristics

DTIC Science & Technology

1981-08-01

the capabilities/limitations of the human visual perceptual processing system and improve the training effectiveness of visual simulation systems...Myron Braunstein of the University of California at Irvine performed all the work in the perceptual area. Mr. Timothy A. Zimmerlin contributed the... work . Thus, while some areas are related, each is resolved independently in order to focus on the basic perceptual limitation. In addition, the

How to keep punishment to maintain cooperation: Introducing social vaccine

NASA Astrophysics Data System (ADS)

Yamamoto, Hitoshi; Okada, Isamu

2016-02-01

Although there is much support for the punishment system as a sophisticated approach to resolving social dilemmas, more than a few researchers have also pointed out the limitations of such an approach. Second-order free riding is a serious issue facing the punishment system. Various pioneering works have suggested that an anti-social behavior or noise stemming from a mutation may, surprisingly, be helpful for avoiding second-order freeloaders. In this work, we show through mathematical analysis and an agent-based simulation of a model extending the meta-norms game that the coercive introduction of a small number of non-cooperators can maintain a cooperative regime robustly. This paradoxical idea was inspired by the effect of a vaccine, which is a weakened pathogen injected into a human body to create antibodies and ward off infection by that pathogen. Our expectation is that the coercive introduction of a few defectors, i.e., a social vaccine, will help maintain a highly cooperative regime because it will ensure that the punishment system works.

On the control of the chaotic attractors of the 2-d Navier-Stokes equations.

PubMed

Smaoui, Nejib; Zribi, Mohamed

2017-03-01

The control problem of the chaotic attractors of the two dimensional (2-d) Navier-Stokes (N-S) equations is addressed in this paper. First, the Fourier Galerkin method based on a reduced-order modelling approach developed by Chen and Price is applied to the 2-d N-S equations to construct a fifth-order system of nonlinear ordinary differential equations (ODEs). The dynamics of the fifth-order system was studied by analyzing the system's attractor for different values of Reynolds number, R e . Then, control laws are proposed to drive the states of the ODE system to a desired attractor. Finally, an adaptive controller is designed to synchronize two reduced order ODE models having different Reynolds numbers and starting from different initial conditions. Simulation results indicate that the proposed control schemes work well.

On the control of the chaotic attractors of the 2-d Navier-Stokes equations

NASA Astrophysics Data System (ADS)

Smaoui, Nejib; Zribi, Mohamed

2017-03-01

The control problem of the chaotic attractors of the two dimensional (2-d) Navier-Stokes (N-S) equations is addressed in this paper. First, the Fourier Galerkin method based on a reduced-order modelling approach developed by Chen and Price is applied to the 2-d N-S equations to construct a fifth-order system of nonlinear ordinary differential equations (ODEs). The dynamics of the fifth-order system was studied by analyzing the system's attractor for different values of Reynolds number, Re. Then, control laws are proposed to drive the states of the ODE system to a desired attractor. Finally, an adaptive controller is designed to synchronize two reduced order ODE models having different Reynolds numbers and starting from different initial conditions. Simulation results indicate that the proposed control schemes work well.

7 CFR 1753.77 - Methods of minor construction.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Minor Construction... Contract Form 773, “Miscellaneous Construction Work and Maintenance Services”, by RUS Contract Form 515, or by work order construction. The rules for using Form 515 for minor construction are contained in...

AFTOMS Technology Issues and Alternatives Report

DOT National Transportation Integrated Search

1989-12-01

This report was prepared to document the findings from the Proof of Concept (POC) work done in FY89 and the early part of FY90 on the US Air Force Technical Order Management System (AFTOMS) project. Objectives of the POC work were: Further developmen...

Exploring image-based classification to detect vehicle make and model.

DOT National Transportation Integrated Search

2013-11-01

The goal of this work is to improve the understanding of the impact of carbon emissions caused by vehicular traffic on : highway systems. In order to achieve this goal, this work obtains a novel pipeline for vehicle segmentation, tracking : and class...

Multiple job contracts of physicians in Ceará, Northeastern Brazil.

PubMed

Maciel, Regina Heloisa; Santos, João Bosco Feitosa dos; Sales, Telma Bessa; Alves, Marco Aurélio de Andrade; Luna, Ana Paula; Feitosa, Leonardo Bezerra

2010-10-01

To analyze the multiple job contracts of physicians in the Brazilian National Health System in the State of Ceará. Documental research was performed about the work contracts of the physicians, based on data of health professional contracts in the municipalities of Ceará state, Northeastern Brazil, in 2008. Indices were created for the quantity of contracts of each physician, as well as the municipalities where each physician maintained work contracts. The distances between the municipalities where they worked was calculated in order to estimate the total weekly hours of work. Of the 7,008 physicians employed by the Ceará state, 3,751 (53.5%) maintain between two and four job contracts and 39 (0.6%) between 11 and 20 contracts. One professional maintained 20 contracts. More than half (51.9%) of the physicians had work contracts that when summed totaled more than 40 weekly working hours and 27.0% (1,894) maintained job contracts with more than one municipality. In order to increase their work income, physicians undertake various jobs, practicing their profession in different locations and various municipalities, involving constant travel and contributing to the precarious conditions of their own lives and, therefore, of the public health system.

A Resonance Overlap Criterion for the Onset of Chaos in Systems of Two Eccentric Planets

NASA Astrophysics Data System (ADS)

Hadden, Sam; Lithwick, Yoram

2018-04-01

I will desrcribe a new analytic criterion to predict the onset of chaos in systems consisting of two massive, eccentric planets. Given a planet pair's spacing and masses, the criterion predicts the eccentricities at which the onset of large-scale chaos occurs. The onset of chaos is predicted based on overlap of mean motion resonances as in Wisdom (1980)'s pioneering work. Whereas Wisdom's work was limited to the overlap of first-order resonance and therefore to nearly circular planets, we account for resonances of all orders. This allows us to consider resonance overlap for planets with arbitrary eccentricities (up to orbit-crossing). Our results show excellent agreement with numerical simulations.

Designing Guiding Systems for Brain-Computer Interfaces

PubMed Central

Kosmyna, Nataliya; Lécuyer, Anatole

2017-01-01

Brain–Computer Interface (BCI) community has focused the majority of its research efforts on signal processing and machine learning, mostly neglecting the human in the loop. Guiding users on how to use a BCI is crucial in order to teach them to produce stable brain patterns. In this work, we explore the instructions and feedback for BCIs in order to provide a systematic taxonomy to describe the BCI guiding systems. The purpose of our work is to give necessary clues to the researchers and designers in Human–Computer Interaction (HCI) in making the fusion between BCIs and HCI more fruitful but also to better understand the possibilities BCIs can provide to them. PMID:28824400

Cognitive analysis of physicians' medication ordering activity.

PubMed

Pelayo, Sylvia; Leroy, Nicolas; Guerlinger, Sandra; Degoulet, Patrice; Meaux, Jean-Jacques; Beuscart-Zéphir, Marie-Catherine

2005-01-01

Computerized Physician Order Entry (CPOE) addresses critical functions in healthcare systems. As the name clearly indicates, these systems focus on order entry. With regard to medication orders, such systems generally force physicians to enter exhaustively documented orders. But a cognitive analysis of the physician's medication ordering task shows that order entry is the last (and least) important step of the entire cognitive therapeutic decision making task. We performed a comparative analysis of these complex cognitive tasks in two working environments, computer-based and paper-based. The results showed that information gathering, selection and interpretation are critical cognitive functions to support the therapeutic decision making. Thus the most important requirement from the physician's perspective would be an efficient display of relevant information provided first in the form of a summarized view of the patient's current treatment, followed by in a more detailed focused display of those items pertinent to the current situation. The CPOE system examined obviously failed to provide the physicians this critical summarized view. Following these results, consistent with users' complaints, the Company decided to engage in a significant re-engineering process of their application.

Ordering Interfluves: a Simple Proposal for Understanding Critical Zone Evolution and Function

NASA Astrophysics Data System (ADS)

Brecheisen, Z. S.; Richter, D., Jr.; Moon, S.; Halpin, P. N.

2015-12-01

A geomorphic interfluve ordering system, a reciprocal to the Hortonian-Strahler stream network order, is envisioned at the Calhoun Critical Zone Observatory (CCZO) in the South Carolina Piedmont. In this system the narrowest and most highly dissected interfluves (gentle ridges and hilltops) are 1st order and increase in rank dendritically through interfluve branching and broadening. Interfluve order attends to the structure, function, and management of residual porous-solid systems in the transport of water, solutes, and eroded solids in our deeply weathered (>30m soil/saprolite) critical zone. Recently generated geospatial data regarding the interactions of geomorphology, human land use, and forest ecology further strengthen the utility of this system. These upland networks and corresponding "land-sheds" have potential in linking recent work in the fields of geophysics and geomorphology regarding bedrock weathering front dynamics. Patterns of bedrock weathering depth, landcover & land-use change, and soil erosion are considered as they correspond to interfluve order. With LiDAR mapping and the burgeoning development and utilization of geophysical techniques and models enabling new quantitative research of critical zone landscape structure and function, many physiographic regions could benefit from a system that delineates and orders interfluve networks.

20 CFR 653.500 - Purpose and scope of subpart.

Code of Federal Regulations, 2012 CFR

2012-04-01

... year round basis. Orders seeking workers to perform agricultural or food processing work on a year round basis which involves permanent relocation are not subject to the requirements of this subpart... interstate clearance systems for less than year round agricultural or food processing work. ...

20 CFR 653.500 - Purpose and scope of subpart.

Code of Federal Regulations, 2011 CFR

2011-04-01

... year round basis. Orders seeking workers to perform agricultural or food processing work on a year round basis which involves permanent relocation are not subject to the requirements of this subpart... interstate clearance systems for less than year round agricultural or food processing work. ...

20 CFR 653.500 - Purpose and scope of subpart.

Code of Federal Regulations, 2014 CFR

2014-04-01

... year round basis. Orders seeking workers to perform agricultural or food processing work on a year round basis which involves permanent relocation are not subject to the requirements of this subpart... interstate clearance systems for less than year round agricultural or food processing work. ...

20 CFR 653.500 - Purpose and scope of subpart.

Code of Federal Regulations, 2013 CFR

2013-04-01

... year round basis. Orders seeking workers to perform agricultural or food processing work on a year round basis which involves permanent relocation are not subject to the requirements of this subpart... interstate clearance systems for less than year round agricultural or food processing work. ...

Mars power system concept definition study. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Littman, Franklin D.

1994-01-01

This report documents the work performed by Rockwell International's Rocketdyne Division on NASA Contract No. NAS3-25808 (Task Order No. 16) entitled 'Mars Power System Definition Study'. This work was performed for NASA's Lewis Research Center (LeRC). The report is divided into two volumes as follows: Volume 1 - Study Results; and Volume 2 - Appendices. The results of the power system characterization studies, operations studies, and technology evaluations are summarized in Volume 1. The appendices include complete, standalone technology development plans for each candidate power system that was investigated.

Equivalence of the Floquet-Magnus and Fer Expansions to Investigate the Dynamics of a Spin System in the Three-Level System.

PubMed

Mananga, Eugene Stephane

2017-08-17

In this work, we investigated the orders to which the Floquet-Magnus expansion (FME) and Fer expansion (FE) are equivalent or different for the three-level system. Specifically, we performed the third-order calculations of both approaches based on elegant integrations formalism. We present an important close relationship between the Floquet-Magnus and Fer expansions. As the propagator from the FME takes the form of the evolution operator, which removes the constraint of a stroboscopic observation, we appreciated the effects of time-evolution under Hamiltonians with different orders separately. Our work unifies and generalizes existing results of Floquet-Magnus and Fer approaches and delivers illustrations of novel springs that boost previous applications that are based on the classical information. Due to the lack of an unequivocal relationship between the FME and FE, some disagreements between the results produced by these theories will be found, especially in NMR experiments. Our results can find applications in the optimization of NMR spectroscopy, quantum computation, quantum optical control, and coherence in optics and might bear new awareness in fundamental perusals of quantum spin dynamics. This work is an important theoretical and numerical contribution in the general field of spin dynamics.

[An Exploration of Working Conditions and Flexible System for Hospital Nurses].

PubMed

Huang, Chung-I; Yu, Chien; Yu, Chin-Cheh

2016-04-01

The lack of sufficient numbers of professional nurses in the healthcare system in Taiwan is an issue that affects the sustainability of this system and that relates closely to working conditions. The present study explores the expectations that nurses hold with regard to working conditions and the operation of a flexible system in hospitals. A literature review and focus-group interviews were used to develop the questionnaire Working Conditions and Flexible System. A total of 1,150 copies of this questionnaire were distributed to practicing nurses using stratified random sampling, with 1,146 valid copies returned for a valid recovery rate of 99.65%. The results show that the expectations of participants concerning working conditions and a flexible system focus on the 6 factors of task, numerical, divisional, temporal, wages, and leading flexibility. The total mean was 4.35 (SD=0.42). The means for the 6 types of flexibility were all greater than 4.0. Participants deemed flexibility to be of high importance. The demographic variables hospital, work location, age, education level, work position, work unit, and total work years all affected the 6 types of flexibility significantly. The present study supports that the retention of nurses is significantly associated with working conditions and the operation of a flexible system. Administrators and mangers must create positive working conditions and a flexible system in order to enhance the retention and career development of nurses.

POD/DEIM reduced-order strategies for efficient four dimensional variational data assimilation

NASA Astrophysics Data System (ADS)

Ştefănescu, R.; Sandu, A.; Navon, I. M.

2015-08-01

This work studies reduced order modeling (ROM) approaches to speed up the solution of variational data assimilation problems with large scale nonlinear dynamical models. It is shown that a key requirement for a successful reduced order solution is that reduced order Karush-Kuhn-Tucker conditions accurately represent their full order counterparts. In particular, accurate reduced order approximations are needed for the forward and adjoint dynamical models, as well as for the reduced gradient. New strategies to construct reduced order based are developed for proper orthogonal decomposition (POD) ROM data assimilation using both Galerkin and Petrov-Galerkin projections. For the first time POD, tensorial POD, and discrete empirical interpolation method (DEIM) are employed to develop reduced data assimilation systems for a geophysical flow model, namely, the two dimensional shallow water equations. Numerical experiments confirm the theoretical framework for Galerkin projection. In the case of Petrov-Galerkin projection, stabilization strategies must be considered for the reduced order models. The new reduced order shallow water data assimilation system provides analyses similar to those produced by the full resolution data assimilation system in one tenth of the computational time.

[Development of a medical equipment support information system based on PDF portable document].

PubMed

Cheng, Jiangbo; Wang, Weidong

2010-07-01

According to the organizational structure and management system of the hospital medical engineering support, integrate medical engineering support workflow to ensure the medical engineering data effectively, accurately and comprehensively collected and kept in electronic archives. Analyse workflow of the medical, equipment support work and record all work processes by the portable electronic document. Using XML middleware technology and SQL Server database, complete process management, data calculation, submission, storage and other functions. The practical application shows that the medical equipment support information system optimizes the existing work process, standardized and digital, automatic and efficient orderly and controllable. The medical equipment support information system based on portable electronic document can effectively optimize and improve hospital medical engineering support work, improve performance, reduce costs, and provide full and accurate digital data

Software Engineering Improvement Plan

NASA Technical Reports Server (NTRS)

2006-01-01

In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

Higher order derivatives of R-Jacobi polynomials

NASA Astrophysics Data System (ADS)

Das, Sourav; Swaminathan, A.

2016-06-01

In this work, the R-Jacobi polynomials defined on the nonnegative real axis related to F-distribution are considered. Using their Sturm-Liouville system higher order derivatives are constructed. Orthogonality property of these higher ordered R-Jacobi polynomials are obtained besides their normal form, self-adjoint form and hypergeometric representation. Interesting results on the Interpolation formula and Gaussian quadrature formulae are obtained with numerical examples.

Validation Methods for Fault-Tolerant avionics and control systems, working group meeting 1

NASA Technical Reports Server (NTRS)

1979-01-01

The proceedings of the first working group meeting on validation methods for fault tolerant computer design are presented. The state of the art in fault tolerant computer validation was examined in order to provide a framework for future discussions concerning research issues for the validation of fault tolerant avionics and flight control systems. The development of positions concerning critical aspects of the validation process are given.

Feasibility of Integrated Menu Recommendation and Self-Order System for Small-Scale Restaurants

NASA Astrophysics Data System (ADS)

Kashima, Tomoko; Matsumoto, Shimpei; Ishii, Hiroaki

2010-10-01

In recent years, point of sales (POS) systems with order function have been developed for restaurants. Since expensive apparatus and system are required for installing POS systems, usually only large-scale restaurant chains can afford to introduce them. In this research, we consider the POS management in a restaurant, which cooperates with an automatic order function by using a personal digital device aiming at the safety of the food, pursuit of service, and further operational efficiency improvements, such as foods management, accounting treatment, and ordering work. In traditional POS systems, information recommendation technology is not taken into consideration. We realize the recommendation of a menu according to the user's preference using rough sets and menu planning based on stock status by applying information recommendation technology. Therefore, we believe that this system can be used in comfort with regard to freshness of foods, allergy, diabetes, etc. Furthermore, due to the reduction of the personnel expenses by an operational efficiency improvement such technology becomes even feasible for small-scale stores.

A-posteriori error estimation for second order mechanical systems

NASA Astrophysics Data System (ADS)

Ruiner, Thomas; Fehr, Jörg; Haasdonk, Bernard; Eberhard, Peter

2012-06-01

One important issue for the simulation of flexible multibody systems is the reduction of the flexible bodies degrees of freedom. As far as safety questions are concerned knowledge about the error introduced by the reduction of the flexible degrees of freedom is helpful and very important. In this work, an a-posteriori error estimator for linear first order systems is extended for error estimation of mechanical second order systems. Due to the special second order structure of mechanical systems, an improvement of the a-posteriori error estimator is achieved. A major advantage of the a-posteriori error estimator is that the estimator is independent of the used reduction technique. Therefore, it can be used for moment-matching based, Gramian matrices based or modal based model reduction techniques. The capability of the proposed technique is demonstrated by the a-posteriori error estimation of a mechanical system, and a sensitivity analysis of the parameters involved in the error estimation process is conducted.

Principles of General Systems Theory: Some Implications for Higher Education Administration

ERIC Educational Resources Information Center

Gilliland, Martha W.; Gilliland, J. Richard

1978-01-01

Three principles of general systems theory are presented and systems theory is distinguished from systems analysis. The principles state that all systems tend to become more disorderly, that they must be diverse in order to be stable, and that only those maximizing their resource utilization for doing useful work will survive. (Author/LBH)

Phase portraits of the full symmetric Toda systems on rank-2 groups

NASA Astrophysics Data System (ADS)

Sorin, A. S.; Chernyakov, Yu. B.; Sharygin, G. I.

2017-11-01

We continue investigations begun in our previous works where we proved that the phase diagram of the Toda system on special linear groups can be identified with the Bruhat order on the symmetric group if all eigenvalues of the Lax matrix are distinct or with the Bruhat order on permutations of a multiset if there are multiple eigenvalues. We show that the phase portrait of the Toda system and the Hasse diagram of the Bruhat order coincide in the case of an arbitrary simple Lie group of rank 2. For this, we verify this property for the two remaining rank-2 groups, Sp(4,ℝ) and the real form of G2.

First-Order System Least-Squares for the Navier-Stokes Equations

NASA Technical Reports Server (NTRS)

Bochev, P.; Cai, Z.; Manteuffel, T. A.; McCormick, S. F.

1996-01-01

This paper develops a least-squares approach to the solution of the incompressible Navier-Stokes equations in primitive variables. As with our earlier work on Stokes equations, we recast the Navier-Stokes equations as a first-order system by introducing a velocity flux variable and associated curl and trace equations. We show that the resulting system is well-posed, and that an associated least-squares principle yields optimal discretization error estimates in the H(sup 1) norm in each variable (including the velocity flux) and optimal multigrid convergence estimates for the resulting algebraic system.

A comprehensive inpatient discharge system.

PubMed Central

O'Connell, E. M.; Teich, J. M.; Pedraza, L. A.; Thomas, D.

1996-01-01

Our group has developed a computer system that supports all phases of the inpatient discharge process. The system fills in most of the physician's discharge order form and the nurse's discharge abstract, using information available from sign-out, order entry, scheduling, and other databases. It supplies information for referrals to outside institutions, and provides a variety of instruction materials for patients. Discharge forms can be completed in advance, so that the patient is not waiting for final paperwork. Physicians and nurses can work on their components independently, rather than in series. Response to the system has been very favorable. PMID:8947755

Management Tools for Bus Maintenance: Current Practices and New Methods. Final Report.

ERIC Educational Resources Information Center

Foerster, James; And Others

Management of bus fleet maintenance requires systematic recordkeeping, management reporting, and work scheduling procedures. Tools for controlling and monitoring routine maintenance activities are in common use. These include defect and fluid consumption reports, work order systems, historical maintenance records, and performance and cost…

The impact of gendered organizational systems on women’s career advancement

PubMed Central

O’Neil, Deborah A.; Hopkins, Margaret M.

2015-01-01

In this Perspective article we propose that in order to pave the way for women’s career advancement into the senior ranks of organizations, attention must be directed at the systemic norms and structures that drive the gendered nature of the workplace. A focus on individual level issues, i.e., women lacking confidence and women opting out, detracts from the work that must be done at the organizational level in order to dismantle the system of pervasive, structural disadvantage facing women seeking to advance to senior leadership positions. PMID:26175708

The impact of gendered organizational systems on women's career advancement.

PubMed

O'Neil, Deborah A; Hopkins, Margaret M

2015-01-01

In this Perspective article we propose that in order to pave the way for women's career advancement into the senior ranks of organizations, attention must be directed at the systemic norms and structures that drive the gendered nature of the workplace. A focus on individual level issues, i.e., women lacking confidence and women opting out, detracts from the work that must be done at the organizational level in order to dismantle the system of pervasive, structural disadvantage facing women seeking to advance to senior leadership positions.

ERIP Project No. 670, Nevada Energy Control Systems, Inc.. Final techincal progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimber, D.J.

1998-02-11

In order to gauge the effectiveness of the ERIP Project No. 670, Nevada Energy Control Systems, Inc., Grant Number DE-FG01-96EE15670, the Statement of Work must be compared to the achievements by NECSI during the grant period. The following report reflects the aforementioned statement and is coordinated directly with it. The project goal is to gather data and test in order to validate earlier tests of energy savings,safety,reliability and practicality of the NECSI Evaporator Fan Controller in order to fully commercialize and market the product.

48 CFR 217.7104 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Section 217.7104 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Master Agreement for...) 252.217-7004, Job Orders and Compensation. (3) 252.217-7005, Inspection and Manner of Doing Work. (4...

48 CFR 217.7104 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 217.7104 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Master Agreement for...) 252.217-7004, Job Orders and Compensation. (3) 252.217-7005, Inspection and Manner of Doing Work. (4...

48 CFR 217.7104 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Section 217.7104 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Master Agreement for...) 252.217-7004, Job Orders and Compensation. (3) 252.217-7005, Inspection and Manner of Doing Work. (4...

48 CFR 217.7104 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Section 217.7104 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Master Agreement for...) 252.217-7004, Job Orders and Compensation. (3) 252.217-7005, Inspection and Manner of Doing Work. (4...

Knowledge-based system V and V in the Space Station Freedom program

NASA Technical Reports Server (NTRS)

Kelley, Keith; Hamilton, David; Culbert, Chris

1992-01-01

Knowledge Based Systems (KBS's) are expected to be heavily used in the Space Station Freedom Program (SSFP). Although SSFP Verification and Validation (V&V) requirements are based on the latest state-of-the-practice in software engineering technology, they may be insufficient for Knowledge Based Systems (KBS's); it is widely stated that there are differences in both approach and execution between KBS V&V and conventional software V&V. In order to better understand this issue, we have surveyed and/or interviewed developers from sixty expert system projects in order to understand the differences and difficulties in KBS V&V. We have used this survey results to analyze the SSFP V&V requirements for conventional software in order to determine which specific requirements are inappropriate for KBS V&V and why they are inappropriate. Further work will result in a set of recommendations that can be used either as guidelines for applying conventional software V&V requirements to KBS's or as modifications to extend the existing SSFP conventional software V&V requirements to include KBS requirements. The results of this work are significant to many projects, in addition to SSFP, which will involve KBS's.

Thermodynamics and computation during collective motion near criticality

NASA Astrophysics Data System (ADS)

Crosato, Emanuele; Spinney, Richard E.; Nigmatullin, Ramil; Lizier, Joseph T.; Prokopenko, Mikhail

2018-01-01

We study self-organization of collective motion as a thermodynamic phenomenon in the context of the first law of thermodynamics. It is expected that the coherent ordered motion typically self-organises in the presence of changes in the (generalized) internal energy and of (generalized) work done on, or extracted from, the system. We aim to explicitly quantify changes in these two quantities in a system of simulated self-propelled particles and contrast them with changes in the system's configuration entropy. In doing so, we adapt a thermodynamic formulation of the curvatures of the internal energy and the work, with respect to two parameters that control the particles' alignment. This allows us to systematically investigate the behavior of the system by varying the two control parameters to drive the system across a kinetic phase transition. Our results identify critical regimes and show that during the phase transition, where the configuration entropy of the system decreases, the rates of change of the work and of the internal energy also decrease, while their curvatures diverge. Importantly, the reduction of entropy achieved through expenditure of work is shown to peak at criticality. We relate this both to a thermodynamic efficiency and the significance of the increased order with respect to a computational path. Additionally, this study provides an information-geometric interpretation of the curvature of the internal energy as the difference between two curvatures: the curvature of the free entropy, captured by the Fisher information, and the curvature of the configuration entropy.

Analysis of nodal aberration properties in off-axis freeform system design.

PubMed

Shi, Haodong; Jiang, Huilin; Zhang, Xin; Wang, Chao; Liu, Tao

2016-08-20

Freeform surfaces have the advantage of balancing off-axis aberration. In this paper, based on the framework of nodal aberration theory (NAT) applied to the coaxial system, the third-order astigmatism and coma wave aberration expressions of an off-axis system with Zernike polynomial surfaces are derived. The relationship between the off-axis and surface shape acting on the nodal distributions is revealed. The nodal aberration properties of the off-axis freeform system are analyzed and validated by using full-field displays (FFDs). It has been demonstrated that adding Zernike terms, up to nine, to the off-axis system modifies the nodal locations, but the field dependence of the third-order aberration does not change. On this basis, an off-axis two-mirror freeform system with 500 mm effective focal length (EFL) and 300 mm entrance pupil diameter (EPD) working in long-wave infrared is designed. The field constant aberrations induced by surface tilting are corrected by selecting specific Zernike terms. The design results show that the nodes of third-order astigmatism and coma move back into the field of view (FOV). The modulation transfer function (MTF) curves are above 0.4 at 20 line pairs per millimeter (lp/mm) which meets the infrared reconnaissance requirement. This work provides essential insight and guidance for aberration correction in off-axis freeform system design.

A new specimen management system using RFID technology.

PubMed

Shim, Hun; Uh, Young; Lee, Seung Hwan; Yoon, Young Ro

2011-12-01

The specimen management system with barcode needs to be improved in order to solve inherent problems in work performance. This study describes the application of Radio Frequency Identification (RFID) which is the solution for the problems associated with specimen labeling and management. A new specimen management system and architecture with RFID technology for clinical laboratory was designed. The suggested system was tested in various conditions such as durability to temperature and aspect of effective utilization of new work flow under a virtual hospital clinical laboratory environment. This system demonstrates its potential application in clinical laboratories for improving work flow and specimen management. The suggested specimen management system with RFID technology has advantages in comparison to the traditional specimen management system with barcode in the aspect of mass specimen processing, robust durability of temperature, humidity changes, and effective specimen tracking.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tew, Karen

I spent the last ten weeks working in the Systems Biology department at Sandia National Laboratories in Livermore, CA. Under the direction of Zachary Bent, I helped do preliminary testing/optimization of a vacuum-driven, capture-based system for pathogen RNA transcript enrichment. I also worked on a project to create mutant Yersinia enterocolitica strains in order to test which genes are involved in intracellular pathogen virulence, as well as sequencing several Klebsiella pneumoniae samples for use by a bioinformaticist.

Reduced-order modeling of piezoelectric energy harvesters with nonlinear circuits under complex conditions

NASA Astrophysics Data System (ADS)

Xiang, Hong-Jun; Zhang, Zhi-Wei; Shi, Zhi-Fei; Li, Hong

2018-04-01

A fully coupled modeling approach is developed for piezoelectric energy harvesters in this work based on the use of available robust finite element packages and efficient reducing order modeling techniques. At first, the harvester is modeled using finite element packages. The dynamic equilibrium equations of harvesters are rebuilt by extracting system matrices from the finite element model using built-in commands without any additional tools. A Krylov subspace-based scheme is then applied to obtain a reduced-order model for improving simulation efficiency but preserving the key features of harvesters. Co-simulation of the reduced-order model with nonlinear energy harvesting circuits is achieved in a system level. Several examples in both cases of harmonic response and transient response analysis are conducted to validate the present approach. The proposed approach allows to improve the simulation efficiency by several orders of magnitude. Moreover, the parameters used in the equivalent circuit model can be conveniently obtained by the proposed eigenvector-based model order reduction technique. More importantly, this work establishes a methodology for modeling of piezoelectric energy harvesters with any complicated mechanical geometries and nonlinear circuits. The input load may be more complex also. The method can be employed by harvester designers to optimal mechanical structures or by circuit designers to develop novel energy harvesting circuits.

Investigating the Implementation of Knowledge Representation in the COMBATXXI System

DTIC Science & Technology

2015-06-01

mechanism. Finally, follow-on research can work towards more cognitive modeling in order to distinguish between manned systems and unmanned systems in...Approved for public release; distribution is unlimited INVESTIGATING THE IMPLEMENTATION OF KNOWLEDGE REPRESENTATION IN THE COMBATXXI SYSTEM by Mongi...INVESTIGATING THE IMPLEMENTATION OF KNOWLEDGE REPRESENTATION IN THE COMBATXXI SYSTEM 5. FUNDING NUMBERS GM10331601, National Institute of General

Fractional-order in a macroeconomic dynamic model

NASA Astrophysics Data System (ADS)

David, S. A.; Quintino, D. D.; Soliani, J.

2013-10-01

In this paper, we applied the Riemann-Liouville approach in order to realize the numerical simulations to a set of equations that represent a fractional-order macroeconomic dynamic model. It is a generalization of a dynamic model recently reported in the literature. The aforementioned equations have been simulated for several cases involving integer and non-integer order analysis, with some different values to fractional order. The time histories and the phase diagrams have been plotted to visualize the effect of fractional order approach. The new contribution of this work arises from the fact that the macroeconomic dynamic model proposed here involves the public sector deficit equation, which renders the model more realistic and complete when compared with the ones encountered in the literature. The results reveal that the fractional-order macroeconomic model can exhibit a real reasonable behavior to macroeconomics systems and might offer greater insights towards the understanding of these complex dynamic systems.

48 CFR 217.7103-4 - Emergency work.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Section 217.7103-4 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Master Agreement for... soliciting offers, may issue a written job order to a contractor that has previously executed a master...

48 CFR 217.7103-4 - Emergency work.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 217.7103-4 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Master Agreement for... soliciting offers, may issue a written job order to a contractor that has previously executed a master...

48 CFR 217.7103-4 - Emergency work.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Section 217.7103-4 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Master Agreement for... soliciting offers, may issue a written job order to a contractor that has previously executed a master...

Quantum-field-theoretical approach to phase–space techniques: Symmetric Wick theorem and multitime Wigner representation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plimak, L.I., E-mail: Lev.Plimak@mbi-berlin.de; Olsen, M.K.

2014-12-15

In this work we present the formal background used to develop the methods used in earlier works to extend the truncated Wigner representation of quantum and atom optics in order to address multi-time problems. Analogs of Wick’s theorem for the Weyl ordering are verified. Using the Bose–Hubbard chain as an example, we show how these may be applied to constructing a mapping of the system in question to phase space. Regularisation issues and the reordering problem for the Heisenberg operators are addressed.

Psychological Sciences Division 1979 Programs.

DTIC Science & Technology

1979-11-01

the potential for substantially improving the ONR effectiveness of Navy undersea manipulator sys- tems. Computer aided controls can be used to Report...OPERATOR VIEWING AND CONTROL OF the operator enters control orders) to determine UNDERSEA VEHICLE AND WORK SYS- ihe structure and mode of command inputs...efforts focus upon a class of control-display ele- Current Navy submersible work systems, such as ments common to general purpose undersea work CURV

Thermodynamic Modeling of Hydrogen Storage Capacity in Mg-Na Alloys

PubMed Central

Abdessameud, S.; Mezbahul-Islam, M.; Medraj, M.

2014-01-01

Thermodynamic modeling of the H-Mg-Na system is performed for the first time in this work in order to understand the phase relationships in this system. A new thermodynamic description of the stable NaMgH3 hydride is performed and the thermodynamic models for the H-Mg, Mg-Na, and H-Na systems are reassessed using the modified quasichemical model for the liquid phase. The thermodynamic properties of the ternary system are estimated from the models of the binary systems and the ternary compound using CALPHAD technique. The constructed database is successfully used to reproduce the pressure-composition isotherms for MgH2 + 10 wt.% NaH mixtures. Also, the pressure-temperature equilibrium diagram and reaction paths for the same composition are predicted at different temperatures and pressures. Even though it is proved that H-Mg-Na does not meet the DOE hydrogen storage requirements for onboard applications, the best working temperatures and pressures to benefit from its full catalytic role are given. Also, the present database can be used for thermodynamic assessments of higher order systems. PMID:25383361

Thermodynamic modeling of hydrogen storage capacity in Mg-Na alloys.

PubMed

Abdessameud, S; Mezbahul-Islam, M; Medraj, M

2014-01-01

Thermodynamic modeling of the H-Mg-Na system is performed for the first time in this work in order to understand the phase relationships in this system. A new thermodynamic description of the stable NaMgH3 hydride is performed and the thermodynamic models for the H-Mg, Mg-Na, and H-Na systems are reassessed using the modified quasichemical model for the liquid phase. The thermodynamic properties of the ternary system are estimated from the models of the binary systems and the ternary compound using CALPHAD technique. The constructed database is successfully used to reproduce the pressure-composition isotherms for MgH2 + 10 wt.% NaH mixtures. Also, the pressure-temperature equilibrium diagram and reaction paths for the same composition are predicted at different temperatures and pressures. Even though it is proved that H-Mg-Na does not meet the DOE hydrogen storage requirements for onboard applications, the best working temperatures and pressures to benefit from its full catalytic role are given. Also, the present database can be used for thermodynamic assessments of higher order systems.

PC-Based systems for experiments in optical characterization of materials

NASA Astrophysics Data System (ADS)

López-Mora, C. C.; Trejo-Duran, M.; Alvarado-Méndez, E.; Rojas-Laguna, R.; Vargas-Rodríguez, E.; Estudillo-Ayala, J. M.; Mata-Chavez, R.; Sukhoivanov, I.; García-Pérez, A.; Ibarra-Manzano, O. G.; Andrade-Lucio, J. A.

2011-01-01

An automatic control for applications of optical characterization of materials using the optical Z-Scan technique is presented in this work. The emphasis is placed in the design of the graphical user interface (GUI) and the automation process. For this purpose, we use a USB data acquisition module with programmable I/O ports for control and signals acquisition for the complete system. The control software was developed using the graphical programming language LabVIEW® and compiled in order to obtain a portable system with the hardware used in this work.

Leadership in Nigerian health system for cancer prevention and control.

PubMed

Ogbimi, R I

2009-06-01

Unacceptable health system outcomes are often related to problems with leadership because the ultimate responsibility for assigned work rests on leadership. In this paper, proper leadership at micro and macro-levels can have positive impact on the health and well being of citizens. While this may be readily obvious in other spheres, it has not been addressed adequately in the context of health care systems and its impact on health outcomes. In this paper, I discuss types of work and leadership systems in order to highlight the importance of leadership and leadership training in collaborative training and research for cancer management. The complexity of health systems highlight the expanded role of leadership in terms of capacity and capability to control the environmental risk factors for cancer, deploy adequate resources for the management of cancers, and ensure fruitful and productive post treatment life for citizens. Improved community awareness, better training of health care workers, improved working environment based on better interpersonal relationships between all cadres of health care workers, environmental health and safety initiatives and research on cancer are some of the areas where improved leadership can lead to better health outcomes. Effective leadership requires a set of skills that can be acquired with requisite operating environment, political will and adequate funding in order to generate the expected improvements in outcome.

Overview of Best Practices in Mitigating the Impact of Natural Disasters and Extreme Weather Phenomena on European Aviation - The MOWE-IT Project

NASA Astrophysics Data System (ADS)

Muehlhausen, Thorsten; Kreuz, Michael; Temme, Annette; Nokkala, Marko; Nurmi, Pertti; Perrels, Adriaan; Hyvarinen, Otto; Yuga, Ilkka; Pylkko, Pirkko; Kral, Stephan; Schaetter, Frank; Bartsch, Mariana; Wiens, Marcus; Michaelides, Silas; Tymvios, Filippos; Papadakis, Matheos; Athanasatos, Spyros

2014-05-01

The European transport system has shown various degrees of vulnerability to external shocks such as severe weather events, which have partially or, in some cases, totally shut down part of the transport system. Under climate change conditions, the identification of Best Practices within the European area and the proposal of short, medium and long term solutions in order to deal with induced disruptions are vital to upkeep the efficiency and integrity of the European transport network. The MOWE-IT (Management of weather events in the transport system) project is a continuation of the work performed in up-to-date European projects such as the EWENT, WEATHER and ECCONET projects. Its aim is to identify such existing best practices and to develop methodologies in order to assist transport operators, authorities and transport system users to mitigate the impact of natural disasters and extreme weather phenomena on transport system performance. While the MOWE-IT project covers a wide number of transportation modes such as road, rail, marine transport, aviation and inland waterways, in this current work, an overview of the project's work performed in the aviation sector in Europe is presented. The MOWE-IT project is funded by the European Union, under its 7th Framework Programme (TRANSPORT SUPPORT ACTIONS).

Implementation of the fugitive emissions system program: The OxyChem experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deshmukh, A.

An overview is provided for the Fugitive Emissions System (FES) that has been implemented at Occidental Chemical in conjunction with the computer-based maintenance system called PassPort{reg_sign} developed by Indus Corporation. The goal of PassPort{reg_sign} FES program has been to interface with facilities data, equipment information, work standards and work orders. Along the way, several implementation hurdles had to be overcome before a monitoring and regulatory system could be standardized for the appropriate maintenance, process and environmental groups. This presentation includes step-by-step account of several case studies that developed during the implementation of the FES system.

POD/DEIM reduced-order strategies for efficient four dimensional variational data assimilation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ştefănescu, R., E-mail: rstefane@vt.edu; Sandu, A., E-mail: sandu@cs.vt.edu; Navon, I.M., E-mail: inavon@fsu.edu

2015-08-15

This work studies reduced order modeling (ROM) approaches to speed up the solution of variational data assimilation problems with large scale nonlinear dynamical models. It is shown that a key requirement for a successful reduced order solution is that reduced order Karush–Kuhn–Tucker conditions accurately represent their full order counterparts. In particular, accurate reduced order approximations are needed for the forward and adjoint dynamical models, as well as for the reduced gradient. New strategies to construct reduced order based are developed for proper orthogonal decomposition (POD) ROM data assimilation using both Galerkin and Petrov–Galerkin projections. For the first time POD, tensorialmore » POD, and discrete empirical interpolation method (DEIM) are employed to develop reduced data assimilation systems for a geophysical flow model, namely, the two dimensional shallow water equations. Numerical experiments confirm the theoretical framework for Galerkin projection. In the case of Petrov–Galerkin projection, stabilization strategies must be considered for the reduced order models. The new reduced order shallow water data assimilation system provides analyses similar to those produced by the full resolution data assimilation system in one tenth of the computational time.« less

Analytical approach to peel stresses in bonded composite stiffened panels

NASA Technical Reports Server (NTRS)

Barkey, Derek A.; Madan, Ram C.; Sutton, Jason O.

1987-01-01

A closed-form solution was obtained for the stresses and displacements of two bonded beams. A system of two fourth-order and two second-order differential equations with the associated boundary equations was determined using a variational work approach. A FORTRAN computer program was devised to solve for the eigenvalues and eigenvectors of this system and to calculate the coefficients from the boundary conditions. The results were then compared with NASTRAN finite-element solutions and shown to agree closely.

Investigation of the Low Power Stage of an 1178 nm Raman System

DTIC Science & Technology

2013-12-23

LEANNE HENRY, DR-III, DAF KENTON T. WOOD, DR-IV, DAF Work Unit Manager Chief, Laser Division This report is published in the...and 1069 nm pumped Raman laser system where the second Stokes is amplified in a 1121 nm resonator defined by high reflector fiber Bragg gratings (FBGs...the gratings was found to impact the performance of the laser and needs to be dealt with in order to obtain high 1178 nm output power levels. In order

Fixing Maintenance Productivity.

ERIC Educational Resources Information Center

Fickes, Michael

2003-01-01

Describes how one university's facility managers use Nextel communications technology in conjunction with a Famis Software maintenance management system to improve the productivity of its maintenance technicians. The system uses a wireless Internet connection to automate the flow of work order information to and from technicians. The key to these…

[The testing system for OCP of the digital X-ray machine].

PubMed

Wang, Yan; Mo, Guoming; Wang, Juru; Zhou, Tao; Yu, Jianguo

2011-09-01

In this paper, we designed a testing system for operator control panel of a high-voltage and high-frequency X-ray machine, and an online testing software for functional components, in order to help the testing engineers to improve their work efficiency.

Application of Human Factors Methods to Design Healthcare Work Systems: Instance of the prevention of Adverse Drug Events.

PubMed

Marcilly, Romaric; Beuscart-Zephir, Marie-Catherine

2015-01-01

Human Factors (HF) methods are increasingly needed to support the design of new technologies in order to avoid that introducing those technologies into healthcare work systems induces use errors with potentially catastrophic consequences for the patients. This chapter illustrates the application of HF methods in developing two health technologies aiming at securing the hospital medication management process. Lessons learned from this project highlight the importance of (i) analyzing the work system in which the technology is intended to be implemented, (ii) involving end users in the design process and (iii) the intermediation role of HF between end users and scientific/technical experts.

GIS WORK GROUP: AN OVERVIEW (INCLUDES GIS-QA AND AUDITING GIS DATABASE SYSTEMS)

EPA Science Inventory

In order to promote cooperation in the implementation of GIS in regional offices, a GIS Regional Workgroup was established by the ten Regions in 1989. Since that time the GIS Work Group evolved and now consists of members from each of the ten EPA Regional Offices, the Office of A...

Transport properties of stripe-ordered high T c cuprates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jie, Qing; Han, Su Jung; Dimitrov, Ivo

Transport measurements provide important characterizations of the nature of stripe order in the cuprates. Initial studies of systems such as La 1.6-xNd 0.4Sr xCuO₄ demonstrated the strong anisotropy between in-plane and c-axis resistivities, but also suggested that stripe order results in a tendency towards insulating behavior within the planes at low temperature. More recent work on La 2-xBa xCuO₄ with x = 1/8 has revealed the occurrence of quasi-two-dimensional superconductivity that onsets with spin-stripe order. The suppression of three-dimensional superconductivity indicates a frustration of the interlayer Josephson coupling, motivating a proposal that superconductivity and stripe order are intertwined in amore » pair-density-wave state. Complementary characterizations of the low-energy states near the Fermi level are provided by measurements of the Hall and Nernst effects, each revealing intriguing signatures of stripe correlations and ordering. We review and discuss this work.« less

Salience of working-memory maintenance and manipulation deficits in schizophrenia

PubMed Central

Hill, S. K.; Griffin, G. B.; Miura, T. Kazuto; Herbener, E. S.; Sweeney, J. A.

2011-01-01

Background Encoding and maintenance of information in working memory, followed by internal manipulation of that information for planning adaptive behavior, are two key components of working-memory systems. Both processes have been reported to be impaired in schizophrenia, but few studies have directly compared the relative severity of these abnormalities, or the degree to which manipulation deficits might be secondary to alterations in maintenance processes. Method Clinically stable schizophrenia patients (n=25) and a demographically similar healthy comparison group (n=24) were administered a verbal span task with three levels of working-memory load. Maintenance was assessed using sequential position questions. Manipulation processes were assessed by requiring comparison of the relative sequential position of test items, which entailed simultaneous serial search strategies regarding item order. Results Both groups showed reduced accuracy and increased reaction time for manipulation compared with maintenance processing. There were significant patient impairments across working-memory loads. There was no differential deficit in manipulation processing, and effect sizes of relative deficit in the patient group were higher for maintenance than manipulation processing. Conclusions The strong correlation for maintenance and manipulation deficits suggest that impairments in the ability to internally manipulate information stored in working-memory systems are not greater than alterations in the encoding and maintaining of information in working memory and that disturbances in maintenance processing may contribute to deficits in higher-order working-memory operations. PMID:20214839

A nonrecursive 'Order N' preconditioned conjugate gradient/range space formulation of MDOF dynamics

NASA Technical Reports Server (NTRS)

Kurdila, A. J.; Menon, R.; Sunkel, John

1991-01-01

This paper addresses the requirements of present-day mechanical system simulations of algorithms that induce parallelism on a fine scale and of transient simulation methods which must be automatically load balancing for a wide collection of system topologies and hardware configurations. To this end, a combination range space/preconditioned conjugage gradient formulation of multidegree-of-freedon dynamics is developed, which, by employing regular ordering of the system connectivity graph, makes it possible to derive an extremely efficient preconditioner from the range space metric (as opposed to the system coefficient matrix). Because of the effectiveness of the preconditioner, the method can achieve performance rates that depend linearly on the number of substructures. The method, termed 'Order N' does not require the assembly of system mass or stiffness matrices, and is therefore amenable to implementation on work stations. Using this method, a 13-substructure model of the Space Station was constructed.

Pulse Detonation Engines for High Speed Flight

NASA Technical Reports Server (NTRS)

Povinelli, Louis A.

2002-01-01

Revolutionary concepts in propulsion are required in order to achieve high-speed cruise capability in the atmosphere and for low cost reliable systems for earth to orbit missions. One of the advanced concepts under study is the air-breathing pulse detonation engine. Additional work remains in order to establish the role and performance of a PDE in flight applications, either as a stand-alone device or as part of a combined cycle system. In this paper, we shall offer a few remarks on some of these remaining issues, i.e., combined cycle systems, nozzles and exhaust systems and thrust per unit frontal area limitations. Currently, an intensive experimental and numerical effort is underway in order to quantify the propulsion performance characteristics of this device. In this paper, we shall highlight our recent efforts to elucidate the propulsion potential of pulse detonation engines and their possible application to high-speed or hypersonic systems.

Improving a 1 meter telescope in order to follow giant planets in a pro-am collaboration. Next step : an affordable adaptive optic system.=

NASA Astrophysics Data System (ADS)

Dauvergne, J.-L.; Colas, F.; Delcroix, M.; Lecacheux, J.

2017-09-01

We already have very good result with the 1 meter telescope of Pic du Midi. Our goal is to have more and more people in the team in order to make a survey has long as possible of Jupiter, Uranus and Neptune. The next step is an OA system, we want to make it work on the 1 meter telescope and also make it available on the market to help other observatories to produce high resolution images of the solar system with middle size telescopes.

Research on the laser angle deception jamming technology of laser countermeasure

NASA Astrophysics Data System (ADS)

Ma, Shi-wei; Chen, Wen-jian; Gao, Wei; Duan, Yuan-yuan

2015-10-01

In recent years , laser guided weapons behave very well at destroying the military goals in the local wars, the single-shot probability, effective range and hitting precision getting better. And the semi-active laser guided weapons are the most widely used laser guided weapons. In order to improve the viability and protect important military goals, it's necessary to study the technology to against the semi-active guided weapons. This paper studies the working principle, the advantages and disadvantages of the semi-active guided weapons at first, and analyze the possibility of laser angle deception jamming system working. Then it analyzes the working principle and process of laser angle deception jamming technology. Finally it designs a half-real simulation system of laser angle deception jamming, which consists of semi-active laser guided weapons simulation system and laser angle deception jamming system. The simulation system demonstrates the working process of the laser angle deception jamming system. This paper provides fundamental base for the research on the countermeasure technology of semi-active laser guided weapons.

Zero-Order Chemical Kinetics as a Context to Investigate Student Understanding of Catalysts and Half-Life

ERIC Educational Resources Information Center

Bain, Kinsey; Rodriguez, Jon-Marc G.; Towns, Marcy H.

2018-01-01

Zero-order systems provide an interesting opportunity for students to think about the underlying mechanism behind the physical phenomena being modeled. The work reported here is part of a larger study that seeks to characterize how students integrate chemistry and mathematics in the context of chemical kinetics. Thirty-six general chemistry…

Introducing Physician Order Entry at a Major Academic Medical Center: I. Impact on Organizational Culture and Behavior.

ERIC Educational Resources Information Center

Massaro, Thomas A.

1993-01-01

Implementation of the University of Virginia Medical Center's computerized system for mandatory recordkeeping of physician orders is discussed, focusing on administrative issues: delays, costs, disruption of work routine and behavior, and the need to bring in a senior management team. Recommendations are made for institutions with similar…

Hybrid reduced order modeling for assembly calculations

DOE PAGES

Bang, Youngsuk; Abdel-Khalik, Hany S.; Jessee, Matthew A.; ...

2015-08-14

While the accuracy of assembly calculations has greatly improved due to the increase in computer power enabling more refined description of the phase space and use of more sophisticated numerical algorithms, the computational cost continues to increase which limits the full utilization of their effectiveness for routine engineering analysis. Reduced order modeling is a mathematical vehicle that scales down the dimensionality of large-scale numerical problems to enable their repeated executions on small computing environment, often available to end users. This is done by capturing the most dominant underlying relationships between the model's inputs and outputs. Previous works demonstrated the usemore » of the reduced order modeling for a single physics code, such as a radiation transport calculation. This paper extends those works to coupled code systems as currently employed in assembly calculations. Finally, numerical tests are conducted using realistic SCALE assembly models with resonance self-shielding, neutron transport, and nuclides transmutation/depletion models representing the components of the coupled code system.« less

Exact first order scattering correction for vector radiative transfer in coupled atmosphere and ocean systems

NASA Astrophysics Data System (ADS)

Zhai, Peng-Wang; Hu, Yongxiang; Josset, Damien B.; Trepte, Charles R.; Lucker, Patricia L.; Lin, Bing

2012-06-01

We have developed a Vector Radiative Transfer (VRT) code for coupled atmosphere and ocean systems based on the successive order of scattering (SOS) method. In order to achieve efficiency and maintain accuracy, the scattering matrix is expanded in terms of the Wigner d functions and the delta fit or delta-M technique is used to truncate the commonly-present large forward scattering peak. To further improve the accuracy of the SOS code, we have implemented the analytical first order scattering treatment using the exact scattering matrix of the medium in the SOS code. The expansion and truncation techniques are kept for higher order scattering. The exact first order scattering correction was originally published by Nakajima and Takana.1 A new contribution of this work is to account for the exact secondary light scattering caused by the light reflected by and transmitted through the rough air-sea interface.

Improving cardiac surgical care: a work systems approach.

PubMed

Wiegmann, Douglas A; Eggman, Ashley A; Elbardissi, Andrew W; Parker, Sarah Henrickson; Sundt, Thoralf M

2010-09-01

Over the past 50 years, significant improvements in cardiac surgical care have been achieved. Nevertheless, surgical errors that significantly impact patient safety continue to occur. In order to further improve surgical outcomes, patient safety programs must focus on rectifying work system factors in the operating room (OR) that negatively impact the delivery of reliable surgical care. The goal of this paper is to provide an integrative review of specific work system factors in the OR that may directly impact surgical care processes, as well as the subsequent recommendations that have been put forth to improve surgical outcomes and patient safety. The important role that surgeons can play in facilitating work system changes in the OR is also discussed. The paper concludes with a discussion of the challenges involved in assessing the impact that interventions have on improving surgical care. Opportunities for future research are also highlighted throughout the paper. 2010 Elsevier Ltd. All rights reserved.

Considerations for setting up an order entry system for nuclear medicine tests.

PubMed

Hara, Narihiro; Onoguchi, Masahisa; Nishida, Toshihiko; Honda, Minoru; Houjou, Osamu; Yuhi, Masaru; Takayama, Teruhiko; Ueda, Jun

2007-12-01

Integrating the Healthcare Enterprise-Japan (IHE-J) was established in Japan in 2001 and has been working to standardize health information and make it accessible on the basis of the fundamental Integrating Healthcare Enterprise (IHE) specifications. However, because specialized operations are used in nuclear medicine tests, online sharing of patient information and test order information from the order entry system as shown by the scheduled workflow (SWF) is difficult, making information inconsistent throughout the facility and uniform management of patient information impossible. Therefore, we examined the basic design (subsystem design) for order entry systems, which are considered an important aspect of information management for nuclear medicine tests and needs to be consistent with the system used throughout the rest of the facility. There are many items that are required by the subsystem when setting up an order entry system for nuclear medicine tests. Among these items, those that are the most important in the order entry system are constructed using exclusion settings, because of differences in the conditions for using radiopharmaceuticals and contrast agents and appointment frame settings for differences in the imaging method and test items. To establish uniform management of patient information for nuclear medicine tests throughout the facility, it is necessary to develop an order entry system with exclusion settings and appointment frames as standard features. Thereby, integration of health information with the Radiology Information System (RIS) or Picture Archiving Communication System (PACS) based on Digital Imaging Communications in Medicine (DICOM) standards and real-time health care assistance can be attained, achieving the IHE agenda of improving health care service and efficiently sharing information.

How a submarine returns to periscope depth: analysing complex socio-technical systems using Cognitive Work Analysis.

PubMed

Stanton, Neville A; Bessell, Kevin

2014-01-01

This paper presents the application of Cognitive Work Analysis to the description of the functions, situations, activities, decisions, strategies, and competencies of a Trafalgar class submarine when performing the function of returning to periscope depth. All five phases of Cognitive Work Analysis are presented, namely: Work Domain Analysis, Control Task Analysis, Strategies Analysis, Social Organisation and Cooperation Analysis, and Worker Competencies Analysis. Complex socio-technical systems are difficult to analyse but Cognitive Work Analysis offers an integrated way of analysing complex systems with the core of functional means-ends analysis underlying all of the other representations. The joined-up analysis offers a coherent framework for understanding how socio-technical systems work. Data were collected through observation and interviews at different sites across the UK. The resultant representations present a statement of how the work domain and current activities are configured in this complex socio-technical system. This is intended to provide a baseline, from which all future conceptions of the domain may be compared. The strength of the analysis is in the multiple representations from which the constraints acting on the work may be analysed. Future research needs to challenge the assumptions behind these constraints in order to develop new ways of working. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

[PSYCHO PHYSIOLOGICAL MARKERS OF ACCELERATED AGING AMONG THOSE WORKING WITH OCCUPATIONAL HAZARDS].

PubMed

Bashkireva, A S; Kachan, Ye Yu; Kulapina, M E

2015-01-01

We assessed the significance of psycho physiological markers of accelerated aging of the function of attention using comparative analysis of two occupational groups in order to reveal how the working process affects mental work capacity. We revealed peculiarities of systemic structure of functions which determine mental work capacity depending on the age and length of service in lorry drivers. It was proved that decrease in the mnestic functions of lorry-drivers takes place 10-15 years earlier compared to the control group. Psycho physiological indices, reflecting the functioning of attention, decreased not only with aging but also with longer driving experience. Our results show that it is necessary to conduct further studies of psycho physiological markers of age-related decrease in short-term memory depending on the activities at work in order to prevent accelerated aging and achieve professional longevity.

Modeling of outpatient prescribing process in iran: a gateway toward electronic prescribing system.

PubMed

Ahmadi, Maryam; Samadbeik, Mahnaz; Sadoughi, Farahnaz

2014-01-01

Implementation of electronic prescribing system can overcome many problems of the paper prescribing system, and provide numerous opportunities of more effective and advantageous prescribing. Successful implementation of such a system requires complete and deep understanding of work content, human force, and workflow of paper prescribing. The current study was designed in order to model the current business process of outpatient prescribing in Iran and clarify different actions during this process. In order to describe the prescribing process and the system features in Iran, the methodology of business process modeling and analysis was used in the present study. The results of the process documentation were analyzed using a conceptual model of workflow elements and the technique of modeling "As-Is" business processes. Analysis of the current (as-is) prescribing process demonstrated that Iran stood at the first levels of sophistication in graduated levels of electronic prescribing, namely electronic prescription reference, and that there were problematic areas including bottlenecks, redundant and duplicated work, concentration of decision nodes, and communicative weaknesses among stakeholders of the process. Using information technology in some activities of medication prescription in Iran has not eliminated the dependence of the stakeholders on paper-based documents and prescriptions. Therefore, it is necessary to implement proper system programming in order to support change management and solve the problems in the existing prescribing process. To this end, a suitable basis should be provided for reorganization and improvement of the prescribing process for the future electronic systems.

Multi-aperture microoptical system for close-up imaging

NASA Astrophysics Data System (ADS)

Berlich, René; Brückner, Andreas; Leitel, Robert; Oberdörster, Alexander; Wippermann, Frank; Bräuer, Andreas

2014-09-01

Modern applications in biomedical imaging, machine vision and security engineering require close-up optical systems with high resolution. Combined with the need for miniaturization and fast image acquisition of extended object fields, the design and fabrication of respective devices is extremely challenging. Standard commercial imaging solutions rely on bulky setups or depend on scanning techniques in order to meet the stringent requirements. Recently, our group has proposed a novel, multi-aperture approach based on parallel image transfer in order to overcome these constraints. It exploits state of the art microoptical manufacturing techniques on wafer level in order to create a compact, cost-effective system with a large field of view. However, initial prototypes have so far been subject to various limitations regarding their manufacturing, reliability and applicability. In this work, we demonstrate the optical design and fabrication of an advanced system, which overcomes these restrictions. In particular, a revised optical design facilitates a more efficient and economical fabrication process and inherently improves system reliability. An additional customized front side illumination module provides homogeneous white light illumination over the entire field of view while maintaining a high degree of compactness. Moreover, the complete imaging assembly is mounted on a positioning system. In combination with an extended working range, this allows for adjustment of the system's focus location. The final optical design is capable of capturing an object field of 36x24 mm2 with a resolution of 150 cycles/mm. Finally, we present experimental results of the respective prototype that demonstrate its enhanced capabilities.

Nigerian University and Manpower Development in a Changing World

ERIC Educational Resources Information Center

Anyebe, Adam Adem

2014-01-01

This paper examines Nigerian university system in relation to manpower development in a rapidly changing world of work. This is for purposes of identifying areas that need urgent attention in order to reposition the system to produce high quality manpower. The study reveals that the expansion in the university system is characterized by a mixed…

Performance Appraisals: How to Make Them Work.

DTIC Science & Technology

1987-03-01

Choice....................8 Rank Order...................... Forced Distribution.................9 Management by Objectives.............10 Assessment... management today. Next, the many sources and causes of shortcomings with evaluation systems are explored in detail. Considerations in system design are...the response of others when I’ve evaluated them. A good performance system can be a tremendous management tool when trying to develop others

Simple, Scalable, Script-Based Science Processor (S4P)

NASA Technical Reports Server (NTRS)

Lynnes, Christopher; Vollmer, Bruce; Berrick, Stephen; Mack, Robert; Pham, Long; Zhou, Bryan; Wharton, Stephen W. (Technical Monitor)

2001-01-01

The development and deployment of data processing systems to process Earth Observing System (EOS) data has proven to be costly and prone to technical and schedule risk. Integration of science algorithms into a robust operational system has been difficult. The core processing system, based on commercial tools, has demonstrated limitations at the rates needed to produce the several terabytes per day for EOS, primarily due to job management overhead. This has motivated an evolution in the EOS Data Information System toward a more distributed one incorporating Science Investigator-led Processing Systems (SIPS). As part of this evolution, the Goddard Earth Sciences Distributed Active Archive Center (GES DAAC) has developed a simplified processing system to accommodate the increased load expected with the advent of reprocessing and launch of a second satellite. This system, the Simple, Scalable, Script-based Science Processor (S42) may also serve as a resource for future SIPS. The current EOSDIS Core System was designed to be general, resulting in a large, complex mix of commercial and custom software. In contrast, many simpler systems, such as the EROS Data Center AVHRR IKM system, rely on a simple directory structure to drive processing, with directories representing different stages of production. The system passes input data to a directory, and the output data is placed in a "downstream" directory. The GES DAAC's Simple Scalable Script-based Science Processing System is based on the latter concept, but with modifications to allow varied science algorithms and improve portability. It uses a factory assembly-line paradigm: when work orders arrive at a station, an executable is run, and output work orders are sent to downstream stations. The stations are implemented as UNIX directories, while work orders are simple ASCII files. The core S4P infrastructure consists of a Perl program called stationmaster, which detects newly arrived work orders and forks a job to run the appropriate executable (registered in a configuration file for that station). Although S4P is written in Perl, the executables associated with a station can be any program that can be run from the command line, i.e., non-interactively. An S4P instance is typically monitored using a simple Graphical User Interface. However, the reliance of S4P on UNIX files and directories also allows visibility into the state of stations and jobs using standard operating system commands, permitting remote monitor/control over low-bandwidth connections. S4P is being used as the foundation for several small- to medium-size systems for data mining, on-demand subsetting, processing of direct broadcast Moderate Resolution Imaging Spectroradiometer (MODIS) data, and Quick-Response MODIS processing. It has also been used to implement a large-scale system to process MODIS Level 1 and Level 2 Standard Products, which will ultimately process close to 2 TB/day.

Building a working understanding of protein adsorption with model systems and serendipity.

PubMed

McGuire, Joseph

2014-12-01

Here we will consider a working understanding of protein adsorption to be one that is adequate for practical use. Serendipity will be considered as a resource that can be used along with model systems in order to build such a working understanding. In particular, the term refers to a preparedness on the part of the researcher to make connections between a variety of everyday inputs from sources in and outside of the main concerns of the research, and a willingness to apply those connections toward the broader utility and impact of the work. In this paper we summarize the highlights and major conclusions of our work with proteins at interfaces - gained by use of comparatively very simple experimental systems while harnessing luck as effectively as we could along the way - and its relevance to meeting challenges in biopharma and biomedical technology. Copyright © 2014 Elsevier B.V. All rights reserved.

Robustness of reduced-order observer-based controllers in transitional 2D Blasius boundary layers

NASA Astrophysics Data System (ADS)

Belson, Brandt; Semeraro, Onofrio; Rowley, Clarence; Pralits, Jan; Henningson, Dan

2011-11-01

In this work, we seek to delay transition in the Blasius boundary layer. We trip the flow with an upstream disturbance and dampen the growth of the resulting structures downstream. The observer-based controllers use a single sensor and a single localized body force near the wall. To formulate the controllers, we first find a reduced-order model of the system via the Eigensystem Realization Algorithm (ERA), then find the H2 optimal controller for this reduced-order system. We find the resulting controllers are effective only when the sensor is upstream of the actuator (in a feedforward configuration), but as is expected, are sensitive to model uncertainty. When the sensor is downstream of the actuator (in a feedback configuration), the reduced-order observer-based controllers are not robust and ineffective on the full system. In order to investigate the robustness properties of the system, an iterative technique called the adjoint of the direct adjoint (ADA) is employed to find a full-dimensional H2 optimal controller. This avoids the reduced-order modelling step and serves as a reference point. ADA is promising for investigating the lack of robustness previously mentioned.

Role of hybridization in the superconducting properties of an extended d p Hubbard model: a detailed numerical study

NASA Astrophysics Data System (ADS)

Calegari, E. J.; Magalhães, S. G.; Gomes, A. A.

2005-04-01

The Roth's two-pole approximation has been used by the present authors to study the effects of the hybridization in the superconducting properties of a strongly correlated electron system. The model used is the extended Hubbard model which includes the d-p hybridization, the p-band and a narrow d-band. The present work is an extension of our previous work (J. Mod. Phys. B 18(2) (2004) 241). Nevertheless, some important correlation functions necessary to estimate the Roth's band shift, are included together with the temperature T and the Coulomb interaction U to describe the superconductivity. The superconducting order parameter of a cuprate system, is obtained following Beenen and Edwards formalism. Here, we investigate in detail the change of the order parameter associated to temperature, Coulomb interaction and Roth's band shift effects on superconductivity. The phase diagram with Tc versus the total occupation number nT, shows the difference respect to the previous work.

Dynamic State Estimation for Multi-Machine Power System by Unscented Kalman Filter With Enhanced Numerical Stability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qi, Junjian; Sun, Kai; Wang, Jianhui

In this paper, in order to enhance the numerical stability of the unscented Kalman filter (UKF) used for power system dynamic state estimation, a new UKF with guaranteed positive semidifinite estimation error covariance (UKFGPS) is proposed and compared with five existing approaches, including UKFschol, UKF-kappa, UKFmodified, UKF-Delta Q, and the squareroot UKF (SRUKF). These methods and the extended Kalman filter (EKF) are tested by performing dynamic state estimation on WSCC 3-machine 9-bus system and NPCC 48-machine 140-bus system. For WSCC system, all methods obtain good estimates. However, for NPCC system, both EKF and the classic UKF fail. It is foundmore » that UKFschol, UKF-kappa, and UKF-Delta Q do not work well in some estimations while UKFGPS works well in most cases. UKFmodified and SRUKF can always work well, indicating their better scalability mainly due to the enhanced numerical stability.« less

Land mobile satellite propagation results

NASA Technical Reports Server (NTRS)

Nicholas, David C.

1988-01-01

During the Fall of 1987 a land mobile satellite demonstration using the MARECS B2 satellite at 26 degrees W was performed. While all the data have not been digested, some observations are in order. First, the system worked remarkably well for the margins indicated. Second, when the system worked poorly, the experimenters could almost always identify terrain or other obstacles causing blockage. Third, the forward link seems relatively more reliable than the return link, and occasional return link problems occured which have not been entirely explained.

Poincaré-Treshchev Mechanism in Multi-scale, Nearly Integrable Hamiltonian Systems

NASA Astrophysics Data System (ADS)

Xu, Lu; Li, Yong; Yi, Yingfei

2018-02-01

This paper is a continuation to our work (Xu et al. in Ann Henri Poincaré 18(1):53-83, 2017) concerning the persistence of lower-dimensional tori on resonant surfaces of a multi-scale, nearly integrable Hamiltonian system. This type of systems, being properly degenerate, arise naturally in planar and spatial lunar problems of celestial mechanics for which the persistence problem ties closely to the stability of the systems. For such a system, under certain non-degenerate conditions of Rüssmann type, the majority persistence of non-resonant tori and the existence of a nearly full measure set of Poincaré non-degenerate, lower-dimensional, quasi-periodic invariant tori on a resonant surface corresponding to the highest order of scale is proved in Han et al. (Ann Henri Poincaré 10(8):1419-1436, 2010) and Xu et al. (2017), respectively. In this work, we consider a resonant surface corresponding to any intermediate order of scale and show the existence of a nearly full measure set of Poincaré non-degenerate, lower-dimensional, quasi-periodic invariant tori on the resonant surface. The proof is based on a normal form reduction which consists of a finite step of KAM iterations in pushing the non-integrable perturbation to a sufficiently high order and the splitting of resonant tori on the resonant surface according to the Poincaré-Treshchev mechanism.

Nonlinearity characterization of temperature sensing systems for integrated circuit testing by intermodulation products monitoring.

PubMed

Altet, J; Mateo, D; Perpiñà, X; Grauby, S; Dilhaire, S; Jordà, X

2011-09-01

This work presents an alternative characterization strategy to quantify the nonlinear behavior of temperature sensing systems. The proposed approach relies on measuring the temperature under thermal sinusoidal steady state and observing the intermodulation products that are generated within the sensing system itself due to its nonlinear temperature-output voltage characteristics. From such intermodulation products, second-order interception points can be calculated as a figure of merit of the measuring system nonlinear behavior. In this scenario, the present work first shows a theoretical analysis. Second, it reports the experimental results obtained with three thermal sensing techniques used in integrated circuits. © 2011 American Institute of Physics

Design and Customization of Telemedicine Systems

PubMed Central

Martínez-Alcalá, Claudia I.; Muñoz, Mirna; Monguet-Fierro, Josep

2013-01-01

In recent years, the advances in information and communication technology (ICT) have resulted in the development of systems and applications aimed at supporting rehabilitation therapy that contributes to enrich patients' life quality. This work is focused on the improvement of the telemedicine systems with the purpose of customizing therapies according to the profile and disability of patients. For doing this, as salient contribution, this work proposes the adoption of user-centered design (UCD) methodology for the design and development of telemedicine systems in order to support the rehabilitation of patients with neurological disorders. Finally, some applications of the UCD methodology in the telemedicine field are presented as a proof of concept. PMID:23762191

Depinning and nonequilibrium dynamic phases of particle assemblies driven over random and ordered substrates: A review

DOE PAGES

Reichhardt, Charles; Olson Reichhardt, Cynthia Jane

2016-12-20

Here, we review the depinning and nonequilibrium phases of collectively interacting particle systems driven over random or periodic substrates. This type of system is relevant to vortices in type-II superconductors, sliding charge density waves, electron crystals, colloids, stripe and pattern forming systems, and skyrmions, and could also have connections to jamming, glassy behaviors, and active matter. These systems are also ideal for exploring the broader issues of characterizing transient and steady state nonequilibrium flow phases as well as nonequilibrium phase transitions between distinct dynamical phases, analogous to phase transitions between different equilibrium states. We discuss the differences between elastic andmore » plastic depinning on random substrates and the different types of nonequilibrium phases which are associated with specific features in the velocity-force curves, fluctuation spectra, scaling relations, and local or global particle ordering. We describe how these quantities can change depending on the dimension, anisotropy, disorder strength, and the presence of hysteresis. Within the moving phase we discuss how there can be a transition from a liquid-like state to dynamically ordered moving crystal, smectic, or nematic states. Systems with periodic or quasiperiodic substrates can have multiple nonequilibrium second or first order transitions in the moving state between chaotic and coherent phases, and can exhibit hysteresis. We also discuss systems with competing repulsive and attractive interactions, which undergo dynamical transitions into stripes and other complex morphologies when driven over random substrates. Throughout this work we highlight open issues and future directions such as absorbing phase transitions, nonequilibrium work relations, inertia, the role of non-dissipative dynamics such as Magnus effects, and how these results could be extended to the broader issues of plasticity in crystals, amorphous solids, and jamming phenomena.« less

Depinning and nonequilibrium dynamic phases of particle assemblies driven over random and ordered substrates: a review

NASA Astrophysics Data System (ADS)

Reichhardt, C.; Olson Reichhardt, C. J.

2017-02-01

We review the depinning and nonequilibrium phases of collectively interacting particle systems driven over random or periodic substrates. This type of system is relevant to vortices in type-II superconductors, sliding charge density waves, electron crystals, colloids, stripe and pattern forming systems, and skyrmions, and could also have connections to jamming, glassy behaviors, and active matter. These systems are also ideal for exploring the broader issues of characterizing transient and steady state nonequilibrium flow phases as well as nonequilibrium phase transitions between distinct dynamical phases, analogous to phase transitions between different equilibrium states. We discuss the differences between elastic and plastic depinning on random substrates and the different types of nonequilibrium phases which are associated with specific features in the velocity-force curves, fluctuation spectra, scaling relations, and local or global particle ordering. We describe how these quantities can change depending on the dimension, anisotropy, disorder strength, and the presence of hysteresis. Within the moving phase we discuss how there can be a transition from a liquid-like state to dynamically ordered moving crystal, smectic, or nematic states. Systems with periodic or quasiperiodic substrates can have multiple nonequilibrium second or first order transitions in the moving state between chaotic and coherent phases, and can exhibit hysteresis. We also discuss systems with competing repulsive and attractive interactions, which undergo dynamical transitions into stripes and other complex morphologies when driven over random substrates. Throughout this work we highlight open issues and future directions such as absorbing phase transitions, nonequilibrium work relations, inertia, the role of non-dissipative dynamics such as Magnus effects, and how these results could be extended to the broader issues of plasticity in crystals, amorphous solids, and jamming phenomena.

SUSTAINABLE WATER EXTRACTION AND DISTRIBUTION SYSTEM FOR AGRICULTURAL APPLICATIONS IN NAMAWANGA, KENYA

EPA Science Inventory

In order to ensure that the pumps are successful when installed for the community, working prototypes were tested, analyzed, and modified. The chief concerns of our functional analysis were the flow rate of the pump, the stability/durability of the system, total pumping head, ...

Analyzing Web Server Logs to Improve a Site's Usage. The Systems Librarian

ERIC Educational Resources Information Center

Breeding, Marshall

2005-01-01

This column describes ways to streamline and optimize how a Web site works in order to improve both its usability and its visibility. The author explains how to analyze logs and other system data to measure the effectiveness of the Web site design and search engine.

Peace (of Mind) in Our Time

ERIC Educational Resources Information Center

Panettieri, Joseph C.

2007-01-01

There's no silver bullet to information security; universities must continue to keep their antivirus, anti-spyware, firewall, and patch management systems in good working order. These days, the largest target for hackers appears to be university databases. Now, universities are searching for new solutions to safeguard those systems. This article…

Computer model of cardiovascular control system responses to exercise

NASA Technical Reports Server (NTRS)

Croston, R. C.; Rummel, J. A.; Kay, F. J.

1973-01-01

Approaches of systems analysis and mathematical modeling together with computer simulation techniques are applied to the cardiovascular system in order to simulate dynamic responses of the system to a range of exercise work loads. A block diagram of the circulatory model is presented, taking into account arterial segments, venous segments, arterio-venous circulation branches, and the heart. A cardiovascular control system model is also discussed together with model test results.

Use of RSS feeds for the implementation of clinical reminder.

PubMed

Chi, Wen-Chou; Wen, Chia-Hsien; Lin, Chih-Yu; Poon, Sek-Kwong; Huang, Shih-Che

2012-06-01

A computer-based reminder system can help physicians get right information and make right decisions in daily clinical work in time. This study presents a RSS-based Clinical Reminding System (RCRS) designed for reminding clinicians to deal with their varied unfinished clinical works. The RCRS was implemented in a hospital to automatically generate messages for every clinician on the basis of clinical information gathered from the hospital information system (HIS) and send them by RSS feed. In order to allow all physicians to participate in the project, the RCRS was integrated with the Computerized Physician Order Entry (COPE) system to provide messages whenever a clinician logs in the HIS; the connection on screen lets the clinician easily make some response. The system can help clinicians focus on patient care without keeping track of the schedule of clinical chores stored in various systems. Two physicians, also directors from Clinical Informatics Research & Development Center (CIRD) who were appointed as project leaders of the RCRS project who went through the entire development process were chosen as interviewees to obtain a preliminary evaluation of the system. The results show the "Information Content" of this system was suggested to be modified, and "Information Accuracy", "Formats", "Ease of use" and "Timeliness" of the system were appropriate to meet the system design purposes.

Application of Time-Delay Absorber to Suppress Vibration of a Dynamical System to Tuned Excitation.

PubMed

El-Ganaini, W A A; El-Gohary, H A

2014-08-01

In this work, we present a comprehensive investigation of the time delay absorber effects on the control of a dynamical system represented by a cantilever beam subjected to tuned excitation forces. Cantilever beam is one of the most widely used system in too many engineering applications, such as mechanical and civil engineering. The main aim of this work is to control the vibration of the beam at simultaneous internal and combined resonance condition, as it is the worst resonance case. Control is conducted via time delay absorber to suppress chaotic vibrations. Time delays often appear in many control systems in the state, in the control input, or in the measurements. Time delay commonly exists in various engineering, biological, and economical systems because of the finite speed of the information processing. It is a source of performance degradation and instability. Multiple time scale perturbation method is applied to obtain a first order approximation for the nonlinear differential equations describing the system behavior. The different resonance cases are reported and studied numerically. The stability of the steady-state solution at the selected worst resonance case is investigated applying Runge-Kutta fourth order method and frequency response equations via Matlab 7.0 and Maple11. Time delay absorber is effective, but within a specified range of time delay. It is the critical factor in selecting such absorber. Time delay absorber is better than the ordinary one as from the effectiveness point of view. The effects of the different absorber parameters on the system behavior and stability are studied numerically. A comparison with the available published work showed a close agreement with some previously published work.

Mixed results in the safety performance of computerized physician order entry.

PubMed

Metzger, Jane; Welebob, Emily; Bates, David W; Lipsitz, Stuart; Classen, David C

2010-04-01

Computerized physician order entry is a required feature for hospitals seeking to demonstrate meaningful use of electronic medical record systems and qualify for federal financial incentives. A national sample of sixty-two hospitals voluntarily used a simulation tool designed to assess how well safety decision support worked when applied to medication orders in computerized order entry. The simulation detected only 53 percent of the medication orders that would have resulted in fatalities and 10-82 percent of the test orders that would have caused serious adverse drug events. It is important to ascertain whether actual implementations of computerized physician order entry are achieving goals such as improved patient safety.

Leaderless consensus for the fractional-order nonlinear multi-agent systems under directed interaction topology

NASA Astrophysics Data System (ADS)

Bai, Jing; Wen, Guoguang; Rahmani, Ahmed

2018-04-01

Leaderless consensus for the fractional-order nonlinear multi-agent systems is investigated in this paper. At the first part, a control protocol is proposed to achieve leaderless consensus for the nonlinear single-integrator multi-agent systems. At the second part, based on sliding mode estimator, a control protocol is given to solve leaderless consensus for the the nonlinear single-integrator multi-agent systems. It shows that the control protocol can improve the systems' convergence speed. At the third part, a control protocol is designed to accomplish leaderless consensus for the nonlinear double-integrator multi-agent systems. To judge the systems' stability in this paper, two classic continuous Lyapunov candidate functions are chosen. Finally, several worked out examples under directed interaction topology are given to prove above results.

First-order fire effects models for land Management: Overview and issues

Treesearch

Elizabeth D. Reinhardt; Matthew B. Dickinson

2010-01-01

We give an overview of the science application process at work in supporting fire management. First-order fire effects models, such as those discussed in accompanying papers, are the building blocks of software systems designed for application to landscapes over time scales from days to centuries. Fire effects may be modeled using empirical, rule based, or process...

The Moving Cultural Frontier of World Order: From Monotheism to North-South Relations.

ERIC Educational Resources Information Center

Mazrui, Ali A.

This essay argues that the history of the international system has revolved around a moving frontier of cultural exclusivity. It is one of a series of working papers commissioned by the World Models Project in its effort to stimulate research, education, dialogue, and political action aimed at contributing to a movement for a just world order.…

Human Expert Labeling Process (HELP): Towards a Reliable Higher-Order User State Labeling Process and Tool to Assess Student Engagement

ERIC Educational Resources Information Center

Aslan, Sinem; Mete, Sinem Emine; Okur, Eda; Oktay, Ece; Alyuz, Nese; Genc, Utku Ergin; Stanhill, David; Esme, Asli Arslan

2017-01-01

In a series of longitudinal research studies, researchers at Intel Corporation in Turkey have been working towards an adaptive learning system automatically detecting student engagement as a higher-order user state in real-time. The labeled data necessary for supervised learning can be obtained through labeling conducted by human experts. Using…

Exploring Children's Thinking. Part 2: The Development of Order Relations; Seriation (Preschool - Third Grade).

ERIC Educational Resources Information Center

Alward, Keith R.

This unit of the Flexible Learning System (FLS), the second of a 3-volume series on children's thinking, focuses on the development of order relations (seriation) in children between 3 and 8 years of age. The series is based on the application of Jean Piaget's work to early childhood education. Seriation concerns the way children reason about…

Diffusive instabilities in a hyperbolic activator-inhibitor system with superdiffusion

NASA Astrophysics Data System (ADS)

Mvogo, Alain; Macías-Díaz, Jorge E.; Kofané, Timoléon Crépin

2018-03-01

We investigate analytically and numerically the conditions for wave instabilities in a hyperbolic activator-inhibitor system with species undergoing anomalous superdiffusion. In the present work, anomalous superdiffusion is modeled using the two-dimensional Weyl fractional operator, with derivative orders α ∈ [1,2]. We perform a linear stability analysis and derive the conditions for diffusion-driven wave instabilities. Emphasis is placed on the effect of the superdiffusion exponent α , the diffusion ratio d , and the inertial time τ . As the superdiffusive exponent increases, so does the wave number of the Turing instability. Opposite to the requirement for Turing instability, the activator needs to diffuse sufficiently faster than the inhibitor in order for the wave instability to occur. The critical wave number for wave instability decreases with the superdiffusive exponent and increases with the inertial time. The maximum value of the inertial time for a wave instability to occur in the system is τmax=3.6 . As one of the main results of this work, we conclude that both anomalous diffusion and inertial time influence strongly the conditions for wave instabilities in hyperbolic fractional reaction-diffusion systems. Some numerical simulations are conducted as evidence of the analytical predictions derived in this work.

Synchronization of chaotic systems involving fractional operators of Liouville-Caputo type with variable-order

NASA Astrophysics Data System (ADS)

Coronel-Escamilla, A.; Gómez-Aguilar, J. F.; Torres, L.; Escobar-Jiménez, R. F.; Valtierra-Rodríguez, M.

2017-12-01

In this paper, we propose a state-observer-based approach to synchronize variable-order fractional (VOF) chaotic systems. In particular, this work is focused on complete synchronization with a so-called unidirectional master-slave topology. The master is described by a dynamical system in state-space representation whereas the slave is described by a state observer. The slave is composed of a master copy and a correction term which in turn is constituted of an estimation error and an appropriate gain that assures the synchronization. The differential equations of the VOF chaotic system are described by the Liouville-Caputo and Atangana-Baleanu-Caputo derivatives. Numerical simulations involving the synchronization of Rössler oscillators, Chua's systems and multi-scrolls are studied. The simulations show that different chaotic behaviors can be obtained if different smooths functions defined in the interval (0 , 1 ] are used as the variable order of the fractional derivatives. Furthermore, simulations show that the VOF chaotic systems can be synchronized.

System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry

PubMed Central

Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

2016-01-01

The construction industry is a demanding work environment where employees’ work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee’s work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee’s work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction. PMID:27801857

System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry.

PubMed

Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

2016-10-28

The construction industry is a demanding work environment where employees' work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee's work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee's work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction.

Compact first and second order polarization mode dispersion emulator

NASA Astrophysics Data System (ADS)

Zhang, Yang; Li, Shiguang; Yang, Changxi

2005-08-01

We propose a 1st and 2nd order polarization mode dispersion emulator (PMDE) with one variable differential group delay (DGD) element using birefringence crystals and four polarization controllers (PCs). Monte Carlo simulations demonstrate that the output 1st and 2nd order polarization mode dispersion (PMD) generated by the PMDE consists with statistic theory. Compared with former PMDEs, this design is tunable, lower-cost, and more integrated for fabrication, which shows response time of 150 ?s, response frequency of 3.8 kHz, working wavelength of 1550 nm, total power consumption of less than 3 W, working range of 0---84 ps and 0---3600 ps2 for 1st and 2nd order PMD emulation, respectively. Also, it is programmable and can be controlled by either singlechip or computer. It can be applied to study the outage probability of optical communication systems due to PMD effect and the effectiveness of PMD compensation.

Modeling and optimization of maximum available work for irreversible gas power cycles with temperature dependent specific heat

NASA Astrophysics Data System (ADS)

Açıkkalp, Emin; Yamık, Hasan

2015-03-01

In classical thermodynamics, the maximum power obtained from a system is defined as exergy (availability). However, the term exergy is used for reversible cycles only; in reality, reversible cycles do not exist, and all systems are irreversible. Reversible cycles do not have such restrictions as time and dimension, and are assumed to work in an equilibrium state. The objective of this study is to obtain maximum available work for SI, CI and Brayton cycles while considering the aforementioned restrictions and assumptions. We assume that the specific heat of the working fluid varies with temperature, we define optimum compression ratios and pressure ratio in order to obtain maximum available work, and we discuss the results obtained. The design parameter most appropriate for the results obtained is presented.

29 CFR 1910.37 - Maintenance, safeguards, and operational features for exit routes.

Code of Federal Regulations, 2010 CFR

2010-07-01

...., sprinkler systems, alarm systems, fire doors, exit lighting) must be in proper working order at all times... maintain an operable employee alarm system that has a distinctive signal to warn employees of fire or other...” not less than three-fourths of an inch (1.9 cm) wide. (c) The fire retardant properties of paints or...

29 CFR 1910.37 - Maintenance, safeguards, and operational features for exit routes.

Code of Federal Regulations, 2011 CFR

2011-07-01

...., sprinkler systems, alarm systems, fire doors, exit lighting) must be in proper working order at all times... maintain an operable employee alarm system that has a distinctive signal to warn employees of fire or other...” not less than three-fourths of an inch (1.9 cm) wide. (c) The fire retardant properties of paints or...

29 CFR 1910.37 - Maintenance, safeguards, and operational features for exit routes.

Code of Federal Regulations, 2014 CFR

2014-07-01

...., sprinkler systems, alarm systems, fire doors, exit lighting) must be in proper working order at all times... maintain an operable employee alarm system that has a distinctive signal to warn employees of fire or other...” not less than three-fourths of an inch (1.9 cm) wide. (c) The fire retardant properties of paints or...

29 CFR 1910.37 - Maintenance, safeguards, and operational features for exit routes.

Code of Federal Regulations, 2013 CFR

2013-07-01

...., sprinkler systems, alarm systems, fire doors, exit lighting) must be in proper working order at all times... maintain an operable employee alarm system that has a distinctive signal to warn employees of fire or other...” not less than three-fourths of an inch (1.9 cm) wide. (c) The fire retardant properties of paints or...

A framework of knowledge creation processes in participatory simulation of hospital work systems.

PubMed

Andersen, Simone Nyholm; Broberg, Ole

2017-04-01

Participatory simulation (PS) is a method to involve workers in simulating and designing their own future work system. Existing PS studies have focused on analysing the outcome, and minimal attention has been devoted to the process of creating this outcome. In order to study this process, we suggest applying a knowledge creation perspective. The aim of this study was to develop a framework describing the process of how ergonomics knowledge is created in PS. Video recordings from three projects applying PS of hospital work systems constituted the foundation of process mining analysis. The analysis resulted in a framework revealing the sources of ergonomics knowledge creation as sequential relationships between the activities of simulation participants sharing work experiences; experimenting with scenarios; and reflecting on ergonomics consequences. We argue that this framework reveals the hidden steps of PS that are essential when planning and facilitating PS that aims at designing work systems. Practitioner Summary: When facilitating participatory simulation (PS) in work system design, achieving an understanding of the PS process is essential. By applying a knowledge creation perspective and process mining, we investigated the knowledge-creating activities constituting the PS process. The analysis resulted in a framework of the knowledge-creating process in PS.

Coupled Molecular Switching Processes in Ordered Mono- and Multilayers of Stimulus-Responsive Rotaxanes on Gold Surfaces

PubMed Central

2015-01-01

Interfaces provide the structural basis for function as, for example, encountered in nature in the membrane-embedded photosystem or in technology in solar cells. Synthetic functional multilayers of molecules cooperating in a coupled manner can be fabricated on surfaces through layer-by-layer self-assembly. Ordered arrays of stimulus-responsive rotaxanes undergoing well-controlled axle shuttling are excellent candidates for coupled mechanical motion. Such stimulus-responsive surfaces may help integrate synthetic molecular machines in larger systems exhibiting even macroscopic effects or generating mechanical work from chemical energy through cooperative action. The present work demonstrates the successful deposition of ordered mono- and multilayers of chemically switchable rotaxanes on gold surfaces. Rotaxane mono- and multilayers are shown to reversibly switch in a coupled manner between two ordered states as revealed by linear dichroism effects in angle-resolved NEXAFS spectra. Such a concerted switching process is observed only when the surfaces are well packed, while less densely packed surfaces lacking lateral order do not exhibit such effects. PMID:25782057

Prerequisites and driving forces behind an extended working life among older workers.

PubMed

Hovbrandt, Pia; Håkansson, Carita; Albin, Maria; Carlsson, Gunilla; Nilsson, Kerstin

2017-11-28

Reforms are changing pension systems in many European countries, in order to both restrict early retirement and force people to extend their working life. From occupational therapy and occupational science perspectives, studies focusing on aspects of working life that motivate the older worker is urgent. The aim was to describe incentives behind an extended working life among people over age 65. Focus group methodology was used, with participants ages 66-71, from varying work fields: construction and technical companies and the municipal elderly care sector. Work was considered important and valuable to the degree of how challenging work was, the possibilities for inclusion in a team of colleagues and the chances for better personal finances. Amongst all, the participants expressed a feeling of a strengthened identity by being challenged and having the opportunity to manage working tasks. The finding showed the actual reasons behind an extended working life among older workers. However, a risk of rising social inequity may appear with increased working life if older people are forced to extend their working life due to a difficult financial situation as a pensioner. A variety of retirement options and initiatives in order to support older workers are justified.

Using experience with bidirectional HL7-ACR-NEMA interfaces between the federal government HIS/RIS and commercial PACS to plan for DICOM

NASA Astrophysics Data System (ADS)

Kuzmak, Peter M.; Norton, Gary S.; Dayhoff, Ruth E.

1995-05-01

The Department of Veterans Affairs has developed a bidirectional HL7 - ACR-NEMA V 2.0 interface for connecting existing federal government hospital/radiology information systems (HIS/RIS) to commercial picture archive and communication systems (PACS). The interface has been in use since October 1993 at the Baltimore VAMC between the VA's HIS/RIS (DHCP) and a commercial PACS, and handles both text and image transfer. The text-only portion of the interface has been ported to work with a second vendor's PACS, and to work with the Department of Defense HIS/RIS (CHCS). Currently the interface is in production at two VA and three DoD sites. The common benefit experienced at all these sites is that passing patient, order, and report information directly from the HIS/RIS to the PACS greatly improves the flow of work in the Radiology Department. Image transfer to the DHCP Imaging System at the Baltimore VAMC demonstrated the advantage of providing `reference quality' (1K X 1K X 8-bit) radiology images to treating clinicians throughout the hospital. Experience has shown that the gateway must handle transactions between the HIS/RIS and the PACS quickly in order to keep up with the volume, and must provide an audit trail for system diagnostic purposes. Work is underway to construct a HL7 - DICOM gateway built upon the operational experience gathered from the existing interface.

A theoretical study of thorium titanium-based alloys

NASA Astrophysics Data System (ADS)

Obodo, K. O.; Chetty, N.

2013-09-01

Using theoretical quantum chemical methods, we investigate the dearth of ordered alloys involving thorium and titanium. Whereas both these elements are known to alloy very readily with various other elements, for example with oxygen, current experimental data suggests that Th and Ti do not alloy very readily with each other. In this work, we consider a variety of ordered alloys at varying stoichiometries involving these elements within the framework of density functional theory using the generalized gradient approximation for the exchange and correlation functional. By probing the energetics, electronic, phonon and elastic properties of these systems, we confirm the scarcity of ordered alloys involving Th and Ti, since for a variety of reasons many of the systems that we considered were found to be unfavorable. However, our investigations resulted in one plausible ordered structure: We propose ThTi3 in the Cr3Si structure as a metastable ordered alloy.

The implementation of Prime Vendor Europe and its successful impact on an overseas naval medical treatment facility.

PubMed

Koerner, S D; Anaya, M A

1996-10-01

Prime Vendor Europe (PVE) is the commercial pharmaceutical ordering and delivery program that is revolutionizing overseas health care delivery at military health care treatment facilities located in the European theater. Mirroring civilian programs already available and replacing the Federal Supply System, PVE offers many benefits never before realized at overseas military health care treatment facilities, including: diminished order turnaround times with resultant decreased Operating Target requirements; rapid order confirmation after order placement; lower carrying costs and inventory needs; better dating of pharmaceuticals received; redistribution and increased efficiency of the current manhours needed to operate a pharmacy supply system; order tracking capabilities; and enhancement of the present cooperative and constructive dichotomous relationship between medical logistics and pharmacy regarding pharmaceutical purchasing practices. This paper will explore the fundamentals, past performance, continuous quality improvement of logistical functions, frame-work establishment for PVE, implementation of PVE, and subsequent observed command benefits of PVE realization.

Parallel machine architecture for production rule systems

DOEpatents

Allen, Jr., John D.; Butler, Philip L.

1989-01-01

A parallel processing system for production rule programs utilizes a host processor for storing production rule right hand sides (RHS) and a plurality of rule processors for storing left hand sides (LHS). The rule processors operate in parallel in the recognize phase of the system recognize -Act Cycle to match their respective LHS's against a stored list of working memory elements (WME) in order to find a self consistent set of WME's. The list of WME is dynamically varied during the Act phase of the system in which the host executes or fires rule RHS's for those rules for which a self-consistent set has been found by the rule processors. The host transmits instructions for creating or deleting working memory elements as dictated by the rule firings until the rule processors are unable to find any further self-consistent working memory element sets at which time the production rule system is halted.

Air Force Human Systems Integration (HSI) in Test and Evaluation (T&E)

DTIC Science & Technology

2012-08-01

allow human aspects related to system design to be tested and evaluated. 15. SUBJECT TERMS Air Force, Human Systems Integration, HSI, Test and...Community that would allow human aspects related to system design to be tested and evaluated. The intent was to identify and develop means for greater...related documentation in order to monitor the human related aspects for system development and design . To address these work areas, the team adopted

Teaching undergraduate nursing students critical thinking: An innovative informatics strategy.

PubMed

Warren, Judith J; Connors, Helen R; Weaver, Charlotte; Simpson, Roy

2006-01-01

Simulated e-Health Delivery System (SEEDS) uses a clinical information system (CIS) to teach students how to process data from virtual patient case studies and work with information technology. SEEDS was developed in response to the Institute of Medicine recommendation that students be taught about information systems in order to improve quality patient care and reduce errors. Curriculum implications, implementation of the system, and technology challenges are discussed.

Identifying problems and generating recommendations for enhancing complex systems: applying the abstraction hierarchy framework as an analytical tool.

PubMed

Xu, Wei

2007-12-01

This study adopts J. Rasmussen's (1985) abstraction hierarchy (AH) framework as an analytical tool to identify problems and pinpoint opportunities to enhance complex systems. The process of identifying problems and generating recommendations for complex systems using conventional methods is usually conducted based on incompletely defined work requirements. As the complexity of systems rises, the sheer mass of data generated from these methods becomes unwieldy to manage in a coherent, systematic form for analysis. There is little known work on adopting a broader perspective to fill these gaps. AH was used to analyze an aircraft-automation system in order to further identify breakdowns in pilot-automation interactions. Four steps follow: developing an AH model for the system, mapping the data generated by various methods onto the AH, identifying problems based on the mapped data, and presenting recommendations. The breakdowns lay primarily with automation operations that were more goal directed. Identified root causes include incomplete knowledge content and ineffective knowledge structure in pilots' mental models, lack of effective higher-order functional domain information displayed in the interface, and lack of sufficient automation procedures for pilots to effectively cope with unfamiliar situations. The AH is a valuable analytical tool to systematically identify problems and suggest opportunities for enhancing complex systems. It helps further examine the automation awareness problems and identify improvement areas from a work domain perspective. Applications include the identification of problems and generation of recommendations for complex systems as well as specific recommendations regarding pilot training, flight deck interfaces, and automation procedures.

30 CFR 75.209 - Automated Temporary Roof Support (ATRS) systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

... paragraphs (b) and (c) of this section, an ATRS system shall be used with roof bolting machines and continuous-mining machines with integral roof bolters operated in a working section. The requirements of this paragraph shall be met according to the following schedule: (1) All new machines ordered after March 28...

30 CFR 75.209 - Automated Temporary Roof Support (ATRS) systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... paragraphs (b) and (c) of this section, an ATRS system shall be used with roof bolting machines and continuous-mining machines with integral roof bolters operated in a working section. The requirements of this paragraph shall be met according to the following schedule: (1) All new machines ordered after March 28...

30 CFR 75.209 - Automated Temporary Roof Support (ATRS) systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... paragraphs (b) and (c) of this section, an ATRS system shall be used with roof bolting machines and continuous-mining machines with integral roof bolters operated in a working section. The requirements of this paragraph shall be met according to the following schedule: (1) All new machines ordered after March 28...

Distribution of a Generic Mission Planning and Scheduling Toolkit for Astronomical Spacecraft

NASA Technical Reports Server (NTRS)

Kleiner, Steven C.

1996-01-01

Work is progressing as outlined in the proposal for this contract. A working planning and scheduling system has been documented and packaged and made available to the WIRE Small Explorer group at JPL, the FUSE group at JHU, the NASA/GSFC Laboratory for Astronomy and Solar Physics and the Advanced Planning and Scheduling Branch at STScI. The package is running successfully on the WIRE computer system. It is expected that the WIRE will reuse significant portions of the SWAS code in its system. This scheduling system itself was tested successfully against the spacecraft hardware in December 1995. A fully automatic scheduling module has been developed and is being added to the toolkit. In order to maximize reuse, the code is being reorganized during the current build into object-oriented class libraries. A paper describing the toolkit has been written and is included in the software distribution. We have experienced interference between the export and production versions of the toolkit. We will be requesting permission to reprogram funds in order to purchase a standalone PC onto which to offload the export version.

On the Interplay between Order Parameter Dynamics and System Parameter Dynamics in Human Perceptual-Cognitive-Behavioral Systems.

PubMed

Frank, T D

2015-04-01

Previous research has demonstrated that perceiving, thinking, and acting are human activities that correspond to self-organized patterns. The emergence of such patterns can be completely described in terms of the dynamics of the pattern amplitudes, which are referred to as order parameters. The patterns emerge at bifurcations points when certain system parameters internal and external to a human agent exceed critical values. At issue is how one might study the order parameter dynamics for sequences of consecutive, emergent perceptual, cognitive, or behavioral activities. In particular, these activities may in turn impact the system parameters that have led to the emergence of the activities in the first place. This interplay between order parameter dynamics and system parameter dynamics is discussed in general and formulated in mathematical terms. Previous work that has made use of this two-tiered framework of order parameter and system parameter dynamics are briefly addressed. As an application, a model for perception under functional fixedness is presented. Finally, it is argued that the phenomena that emerge in this framework and can be observed when human agents perceive, think, and act are just as likely to occur in pattern formation systems of the inanimate world. Consequently, these phenomena do not necessarily have a neurophysiological basis but should instead be understood from the perspective of the theory of self-organization.

Evaluation of the Teaching Standards at Institutions of Higher Education Looks Forward to "Five Changes"

ERIC Educational Resources Information Center

Zhentian, Liu

2009-01-01

In order to promote the sustained and healthy development of teaching evaluation work, five changes should be brought about in the evaluation of the level of undergraduate teaching at China's institutions of higher education: Change teaching evaluation from a specific item of work to a system of a long-term and normative nature; change teaching…

Views of Teachers Working in South-East Anatolia Region Regarding Current Problems in Education

ERIC Educational Resources Information Center

Bagceci, Birsen

2017-01-01

The purpose of this study is to identify the current problems of the teachers working in the provinces of Southeastern Anatolia in Turkey and to list these problems according to their importance. Screening model is used in the study. One open-ended question was asked (identify seven problems related to the education system and order them according…

Feasibility study of an Integrated Program for Aerospace-vehicle Design (IPAD) system. Volume 4: Design of the IPAD system. Part 1: IPAD system design requirements, phase 1, task 2

NASA Technical Reports Server (NTRS)

Garrocq, C. A.; Hurley, M. J.

1973-01-01

System requirements, software elements, and hardware equipment required for an IPAD system are defined. An IPAD conceptual design was evolved, a potential user survey was conducted, and work loads for various types of interactive terminals were projected. Various features of major host computing systems were compared, and target systems were selected in order to identify the various elements of software required.

Research in robust control for hypersonic aircraft

NASA Technical Reports Server (NTRS)

Calise, A. J.

1994-01-01

The research during the third reporting period focused on fixed order robust control design for hypersonic vehicles. A new technique was developed to synthesize fixed order H(sub infinity) controllers. A controller canonical form is imposed on the compensator structure and a homotopy algorithm is employed to perform the controller design. Various reduced order controllers are designed for a simplified version of the hypersonic vehicle model used in our previous studies to demonstrate the capabilities of the code. However, further work is needed to investigate the issue of numerical ill-conditioning for large order systems and to make the numerical approach more reliable.

Distributed ESO based cooperative tracking control for high-order nonlinear multiagent systems with lumped disturbance and application in multi flight simulators systems.

PubMed

Cong, Zhang

2018-03-01

Based on extended state observer, a novel and practical design method is developed to solve the distributed cooperative tracking problem of higher-order nonlinear multiagent systems with lumped disturbance in a fixed communication topology directed graph. The proposed method is designed to guarantee all the follower nodes ultimately and uniformly converge to the leader node with bounded residual errors. The leader node, modeled as a higher-order non-autonomous nonlinear system, acts as a command generator giving commands only to a small portion of the networked follower nodes. Extended state observer is used to estimate the local states and lumped disturbance of each follower node. Moreover, each distributed controller can work independently only requiring the relative states and/or the estimated relative states information between itself and its neighbors. Finally an engineering application of multi flight simulators systems is demonstrated to test and verify the effectiveness of the proposed algorithm. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Regolith Advanced Surface Systems Operations Robot (RASSOR) Phase 2 and Smart Autonomous Sand-Swimming Excavator

NASA Technical Reports Server (NTRS)

Sandy, Michael

2015-01-01

The Regolith Advanced Surface Systems Operations Robot (RASSOR) Phase 2 is an excavation robot for mining regolith on a planet like Mars. The robot is programmed using the Robotic Operating System (ROS) and it also uses a physical simulation program called Gazebo. This internship focused on various functions of the program in order to make it a more professional and efficient robot. During the internship another project called the Smart Autonomous Sand-Swimming Excavator was worked on. This is a robot that is designed to dig through sand and extract sample material. The intern worked on programming the Sand-Swimming robot, and designing the electrical system to power and control the robot.

Student Internship Program Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

CASSIDY,TIMOTHY A.

2000-08-04

This is the author's third summer working at Sandia National Laboratories in organization 5712. He is a physics major at Reed College in Portland, Oregon. His work at Sandia began during his senior year at Eldorado High School, when he worked part time and received school credit for participating in the internship program. During that time and two ensuing summers he worked on a variety of projects. These experiences included testing a number of optical-electronic systems, performing such tasks as determining the spectral responsivity of photodiodes and placing optical/electronic systems in front of a variety of light-sources in order tomore » generate calibration curves. He also contributed to the computer generation of data to model a hypothetical satellite-mounted detection system using SSGM (Synthetic Scene Generation Model) and the Khoros visual programming software Cantata on a UNIX operating system. Other experiences included pre-flight satellite testing, and work in the field deploying a suite of sensors and data collection equipment in Nevada. This summer he is involved in image analysis using the software development tools of the Khoros programming environment. He is working on a project whose goal is to identify superimposed spectra obtained from remote-sensing equipment. The spectra to be identified are those of chemical warfare agents and precursor chemicals from the industrial processes used to manufacture them. Identifying these spectra is a challenge when they are mixed with each other and with incident light from the ground and atmosphere--photons that are both reflected from the sun and emitted as blackbody radiation. In order to model this process, he is working on a Khoros program that will add noise to laboratory-obtained spectra from a variety of chemicals. This altered data will mimic what a remote sensing device is likely to record in the field. Given this example of likely field results, developing an ideal sensor and a method to identify spectra from such data will continue for a number of years.« less

On hyperbolicity and Gevrey well-posedness. Part two: Scalar or degenerate transitions

NASA Astrophysics Data System (ADS)

Morisse, Baptiste

2018-04-01

For first-order quasi-linear systems of partial differential equations, we formulate an assumption of a transition from initial hyperbolicity to ellipticity. This assumption bears on the principal symbol of the first-order operator. Under such an assumption, we prove a strong Hadamard instability for the associated Cauchy problem, namely an instantaneous defect of Hölder continuity of the flow from Gσ to L2, with 0 < σ <σ0, the limiting Gevrey index σ0 depending on the nature of the transition. We restrict here to scalar transitions, and non-scalar transitions in which the boundary of the hyperbolic zone satisfies a flatness condition. As in our previous work for initially elliptic Cauchy problems [B. Morisse, On hyperbolicity and Gevrey well-posedness. Part one: the elliptic case, arxiv:arXiv:1611.07225], the instability follows from a long-time Cauchy-Kovalevskaya construction for highly oscillating solutions. This extends recent work of N. Lerner, T. Nguyen, and B. Texier [The onset of instability in first-order systems, to appear in J. Eur. Math. Soc.].

CCD imaging system for the EUV solar telescope

NASA Astrophysics Data System (ADS)

Gong, Yan; Song, Qian; Ye, Bing-Xun

2006-01-01

In order to develop the detector adapted to the space solar telescope, we have built a CCD camera system capable of working in the extra ultraviolet (EUV) band, which is composed of one phosphor screen, one intensified system using a photocathode/micro-channel plate(MCP)/ phosphor, one optical taper and one chip of front-illuminated (FI) CCD without screen windows. All of them were stuck one by one with optical glue. The working principle of the camera system is presented; moreover we have employed the mesh experiment to calibrate and test the CCD camera system in 15~24nm, the position resolution of about 19 μm is obtained at the wavelength of 17.1nm and 19.5nm.

Design and fabrication of a high-precision cylinder beam expander

NASA Astrophysics Data System (ADS)

Zhang, Yong-hong; Yan, Hong; Xie, Bing; Li, Jian-ming; Luo, Zhong-xiang

2018-03-01

In order to compress the beam divergence angle and reduce the energy density, beam expansion system is widely used to expand the beam in laser system. Cylinder beam expander belongs to one-dimension expander, which expands the laser beam in only one direction (X direction or Y direction), a refraction cylinder expander whose beam diameter is 180mm×120mm and magnitude ratio is 12 is designed in this paper, the working wavelength is 1058nm. To solve the problem of inequality of the working wavelength and the testing wavelength, compensation method of using parallel plate to test the system aberration is proposed. By rough grinding (precision grinding) polish and the system grinding, the final system aberration is 0.24λ(peak-valley value)

The AOLI low-order non-linear curvature wavefront sensor: laboratory and on-sky results

NASA Astrophysics Data System (ADS)

Crass, Jonathan; King, David; MacKay, Craig

2014-08-01

Many adaptive optics (AO) systems in use today require the use of bright reference objects to determine the effects of atmospheric distortions. Typically these systems use Shack-Hartmann Wavefront sensors (SHWFS) to distribute incoming light from a reference object between a large number of sub-apertures. Guyon et al. evaluated the sensitivity of several different wavefront sensing techniques and proposed the non-linear Curvature Wavefront Sensor (nlCWFS) offering improved sensitivity across a range of orders of distortion. On large ground-based telescopes this can provide nearly 100% sky coverage using natural guide stars. We present work being undertaken on the nlCWFS development for the Adaptive Optics Lucky Imager (AOLI) project. The wavefront sensor is being developed as part of a low-order adaptive optics system for use in a dedicated instrument providing an AO corrected beam to a Lucky Imaging based science detector. The nlCWFS provides a total of four reference images on two photon-counting EMCCDs for use in the wavefront reconstruction process. We present results from both laboratory work using a calibration system and the first on-sky data obtained with the nlCWFS at the 4.2 metre William Herschel Telescope, La Palma. In addition, we describe the updated optical design of the wavefront sensor, strategies for minimising intrinsic effects and methods to maximise sensitivity using photon-counting detectors. We discuss on-going work to develop the high speed reconstruction algorithm required for the nlCWFS technique. This includes strategies to implement the technique on graphics processing units (GPUs) and to minimise computing overheads to obtain a prior for a rapid convergence of the wavefront reconstruction. Finally we evaluate the sensitivity of the wavefront sensor based upon both data and low-photon count strategies.

The Priority Inversion Problem and Real-Time Symbolic Model Checking

DTIC Science & Technology

1993-04-23

real time systems unpredictable in subtle ways. This makes it more difficult to implement and debug such systems. Our work discusses this problem and presents one possible solution. The solution is formalized and verified using temporal logic model checking techniques. In order to perform the verification, the BDD-based symbolic model checking algorithm given in previous works was extended to handle real-time properties using the bounded until operator. We believe that this algorithm, which is based on discrete time, is able to handle many real-time properties

Evaluation and selection of refrigeration systems for lunar surface and space applications

NASA Technical Reports Server (NTRS)

Copeland, R. J.; Blount, T. D.; Williams, J. L.

1971-01-01

Evaluated are the various refrigeration machines which could be used to provide heat rejection in environmental control systems for lunar surface and spacecraft applications, in order to select the best refrigeration machine for satisfying each individual application and the best refrigeration machine for satisfying all of the applications. The refrigeration machine considered include: (1) vapor comparison cycle (work-driven); (2) vapor adsorption cycle (heat-driven); (3) vapor absorption cycle (heat-driven); (4) thermoelectric (electrically-driven); (5) gas cycle (work driven); (6) steam-jet (heat-driven).

Automatic system for ionization chamber current measurements.

PubMed

Brancaccio, Franco; Dias, Mauro S; Koskinas, Marina F

2004-12-01

The present work describes an automatic system developed for current integration measurements at the Laboratório de Metrologia Nuclear of Instituto de Pesquisas Energéticas e Nucleares. This system includes software (graphic user interface and control) and a module connected to a microcomputer, by means of a commercial data acquisition card. Measurements were performed in order to check the performance and for validating the proposed design.

Development of IS2100: An Information Systems Laboratory.

DTIC Science & Technology

1985-03-01

systems for digital logic; hardware architecture; machine, assembly, and high order language programming; and application packages such as database... applications and limitations. They should be able to define, demonstrate and/or discuss how computers are used, how they do their work, how to use them, and...limitations. Hands on operation of the hardware and software provides experience that aids in future selection of hardware systems and applications

Electronic system for data acquisition to study radiation effects on operating MOSFET transistors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alves de Oliveira, Juliano; Assis de Melo, Marco Antônio; Guazzelli da Silveira, Marcilei A.

In this work we present the development of an acquisition system for characterizing transistors under X-ray radiation. The system is able to carry out the acquisition and to storage characteristic transistor curves. To test the acquisition system we have submitted polarized P channel MOS transistors under continuous 10-keV X-ray doses up to 1500 krad. The characterization system can operate in the saturation region or in the linear region in order to observe the behavior of the currents or voltages involved during the irradiation process. Initial tests consisted of placing the device under test (DUT) in front of the X-ray beammore » direction, while its drain current was constantly monitored through the prototype generated in this work, the data are stored continuously and system behavior was monitored during the test. In order to observe the behavior of the DUT during the radiation tests, we used an acquisition system that consists of an ultra-low consumption16-bit Texas Instruments MSP430 microprocessor. Preliminary results indicate linear behavior of the voltage as a function of the exposure time and fast recovery. These features may be favorable to use this device as a radiation dosimeter to monitor low rate X-ray.« less

Analysis of candidates for interacting galaxy clusters. I. A1204 and A2029/A2033

NASA Astrophysics Data System (ADS)

Gonzalez, Elizabeth Johana; de los Rios, Martín; Oio, Gabriel A.; Lang, Daniel Hernández; Tagliaferro, Tania Aguirre; Domínguez R., Mariano J.; Castellón, José Luis Nilo; Cuevas L., Héctor; Valotto, Carlos A.

2018-04-01

Context. Merging galaxy clusters allow for the study of different mass components, dark and baryonic, separately. Also, their occurrence enables to test the ΛCDM scenario, which can be used to put constraints on the self-interacting cross-section of the dark-matter particle. Aim. It is necessary to perform a homogeneous analysis of these systems. Hence, based on a recently presented sample of candidates for interacting galaxy clusters, we present the analysis of two of these cataloged systems. Methods: In this work, the first of a series devoted to characterizing galaxy clusters in merger processes, we perform a weak lensing analysis of clusters A1204 and A2029/A2033 to derive the total masses of each identified interacting structure together with a dynamical study based on a two-body model. We also describe the gas and the mass distributions in the field through a lensing and an X-ray analysis. This is the first of a series of works which will analyze these type of system in order to characterize them. Results: Neither merging cluster candidate shows evidence of having had a recent merger event. Nevertheless, there is dynamical evidence that these systems could be interacting or could interact in the future. Conclusions: It is necessary to include more constraints in order to improve the methodology of classifying merging galaxy clusters. Characterization of these clusters is important in order to properly understand the nature of these systems and their connection with dynamical studies.

Observation of discrete time-crystalline order in a disordered dipolar many-body system

NASA Astrophysics Data System (ADS)

Choi, Soonwon; Choi, Joonhee; Landig, Renate; Kucsko, Georg; Zhou, Hengyun; Isoya, Junichi; Jelezko, Fedor; Onoda, Shinobu; Sumiya, Hitoshi; Khemani, Vedika; von Keyserlingk, Curt; Yao, Norman; Demler, Eugene; Lukin, Mikhail

2017-04-01

The interplay of periodic driving, disorder, and strong interactions has recently been predicted to result in exotic ``time crystalline'' phases, which spontaneously break the discrete time translation symmetry of the underlying drive. Here, we report the experimental observation of such discrete time crystalline order in a driven, disordered ensemble of dipolar spin impurities in diamond at room temperature. We observe long lived temporal correlations at integer multiples of the fundamental driving period, experimentally identify the phase boundary and find that the temporal order is protected by strong interactions; this order is remarkably stable against perturbations, even in the presence of slow thermalization. We provide a theoretical description of approximate Floquet eigenstates of the system based on product state ansatz and predict the phase boundary, which is in qualitative agreement with our observations. Our work opens the door to exploring dynamical phases of matter and controlling interacting, disordered many body systems. NSF, CUA, NSSEFF, ARO MURI, Moore Foundation.

Mars Equipment Transport System

NASA Technical Reports Server (NTRS)

Sorrells, Cindy; Geiger, Michelle; Ohanlon, Sean; Pieloch, Stuart; Brogan, Nick

1993-01-01

Mechanical Engineering Senior Design Project 1 (ME4182) is a part of the NASA/University Advanced Design Program. Under this program, NASA allocates money and resources to students to be used in design work for a specified topic. The current topic is the exploration and colonization of Mars. The specific area in which we are to work is the transportation of the modules in which astronauts will live while on Mars. NASA is concerned about the weight of the module transferring system, as the shipping cost to Mars is quite expensive. NASA has specified that the weight of the system is to be minimized in order to reduce the shipping costs.

UAS Integration in the NAS: Detect and Avoid

NASA Technical Reports Server (NTRS)

Shively, Jay

2018-01-01

This presentation will cover the structure of the unmanned aircraft systems (UAS) integration into the national airspace system (NAS) project (UAS-NAS Project). The talk also details the motivation of the project to help develop standards for a detect-and-avoid (DAA) system, which is required in order to comply with requirements in manned aviation to see-and-avoid other traffic so as to maintain well clear. The presentation covers accomplishments reached by the project in Phase 1 of the research, and touches on the work to be done in Phase 2. The discussion ends with examples of the display work developed as a result of the Phase 1 research.

The Medical Gopher — A Microcomputer Based Physician Work Station

PubMed Central

McDonald, Clement J.

1984-01-01

We've developed a microcomputer medical work station intended to reduce the physician's “gopher” work of fetching, reviewing, organizing and writing that consumes his day. The system requires extensive physician interaction; so we have developed a fast and consistent menu-oriented user interface. It provides facilities for entering prescriptions, orders, problems and other medical record information and for generating flowsheets, executing reminder rules, providing ad hoc retrievals and reporting facts about drugs, tests and differential diagnoses. Each work station is connected to a central server (currently a VAX 117/80) in a network configuration, but carries all of its own programs, tables and medical records for a few hundred patients, locally. This system is tested but not yet tried. Questions remain about physician's acceptance and the true usefullness of such a work station.

A diagnostic signal selection scheme for planetary gearbox vibration monitoring under non-stationary operational conditions

NASA Astrophysics Data System (ADS)

Feng, Ke; Wang, KeSheng; Zhang, Mian; Ni, Qing; Zuo, Ming J.

2017-03-01

The planetary gearbox, due to its unique mechanical structures, is an important rotating machine for transmission systems. Its engineering applications are often in non-stationary operational conditions, such as helicopters, wind energy systems, etc. The unique physical structures and working conditions make the vibrations measured from planetary gearboxes exhibit a complex time-varying modulation and therefore yield complicated spectral structures. As a result, traditional signal processing methods, such as Fourier analysis, and the selection of characteristic fault frequencies for diagnosis face serious challenges. To overcome this drawback, this paper proposes a signal selection scheme for fault-emphasized diagnostics based upon two order tracking techniques. The basic procedures for the proposed scheme are as follows. (1) Computed order tracking is applied to reveal the order contents and identify the order(s) of interest. (2) Vold-Kalman filter order tracking is used to extract the order(s) of interest—these filtered order(s) constitute the so-called selected vibrations. (3) Time domain statistic indicators are applied to the selected vibrations for faulty information-emphasized diagnostics. The proposed scheme is explained and demonstrated in a signal simulation model and experimental studies and the method proves to be effective for planetary gearbox fault diagnosis.

Effects of temperature and electric field on order parameters in ferroelectric hexagonal manganites

NASA Astrophysics Data System (ADS)

Zhang, C. X.; Yang, K. L.; Jia, P.; Lin, H. L.; Li, C. F.; Lin, L.; Yan, Z. B.; Liu, J.-M.

2018-03-01

In Landau-Devonshire phase transition theory, the order parameter represents a unique property for a disorder-order transition at the critical temperature. Nevertheless, for a phase transition with more than one order parameter, such behaviors can be quite different and system-dependent in many cases. In this work, we investigate the temperature (T) and electric field (E) dependence of the two order parameters in improper ferroelectric hexagonal manganites, addressing the phase transition from the high-symmetry P63/mmc structure to the polar P63cm structure. It is revealed that the trimerization as the primary order parameter with two components: the trimerization amplitude Q and phase Φ, and the spontaneous polarization P emerging as the secondary order parameter exhibit quite different stability behaviors against various T and E. The critical exponents for the two parameters Q and P are 1/2 and 3/2, respectively. As temperature increases, the window for the electric field E enduring the trimerization state will shrink. An electric field will break the Z2 part of the Z2×Z3 symmetry. The present work may shed light on the complexity of the vortex-antivortex domain structure evolution near the phase transition temperature.

Study and practice in the construction of open physical experiments teaching system

NASA Astrophysics Data System (ADS)

Xu, Yan

2017-09-01

Based on open physical experiments teaching system put forward by Ministry of Education, HHU(Hohai University) has carried out the construction of open experimental manage system, which includes course selecting system, teaching system, manage system and information desk. The innovation is in order to mobilize the students’ learning autonomy, cultivate the students’ creative ability and improve teaching quality. Besides, it achieves direct management from school to college to the laboratory and traced manage to the working device regardless of distance and time.

25 CFR 700.55 - Decent, safe, and sanitary dwelling.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., clean, weathertight and in good repair and has adequate living space and number of rooms. (3) Has an... flush toilet, all in good working order and properly connected to a sewage drainage system; and (9) In...

25 CFR 700.55 - Decent, safe, and sanitary dwelling.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., clean, weathertight and in good repair and has adequate living space and number of rooms. (3) Has an... flush toilet, all in good working order and properly connected to a sewage drainage system; and (9) In...

25 CFR 700.55 - Decent, safe, and sanitary dwelling.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., clean, weathertight and in good repair and has adequate living space and number of rooms. (3) Has an... flush toilet, all in good working order and properly connected to a sewage drainage system; and (9) In...

25 CFR 700.55 - Decent, safe, and sanitary dwelling.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., clean, weathertight and in good repair and has adequate living space and number of rooms. (3) Has an... flush toilet, all in good working order and properly connected to a sewage drainage system; and (9) In...

25 CFR 700.55 - Decent, safe, and sanitary dwelling.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., clean, weathertight and in good repair and has adequate living space and number of rooms. (3) Has an... flush toilet, all in good working order and properly connected to a sewage drainage system; and (9) In...

Megawatt solar power systems for lunar surface operations

NASA Technical Reports Server (NTRS)

Adams, B.; Alhadeff, S.; Beard, S.; Carlile, D.; Cook, D.; Douglas, C.; Garcia, D.; Gillespie, D.; Golingo, R.; Gonzalez, D.

1990-01-01

The work presented here shows that a solar power system can provide power on the order of one megawatt to a lunar base with a fairly high specific power. The main drawback to using solar power is still the high mass, and therefore, cost of supplying energy storage through the solar night. The use of cryogenic reactant storage in a fuel cell system, however, greatly reduces the total system mass over conventional energy storage schemes.

Achieving work-life balance in the National Collegiate Athletic Association Division I setting, part II: perspectives from head athletic trainers.

PubMed

Goodman, Ashley; Mazerolle, Stephanie M; Pitney, William A

2015-01-01

Work-life balance has been examined at the collegiate level from multiple perspectives except for the athletic trainer (AT) serving in a managerial or leadership role. To investigate challenges and strategies used in achieving work-life balance from the perspective of the head AT at a National Collegiate Athletic Association Division I university. Qualitative study. Web-based management system. A total of 18 head ATs (13 men, 5 women; age = 44 ± 8 years, athletic training experience = 22 ± 7 years) volunteered. Participants journaled their thoughts and experiences in response to a series of questions. To establish data credibility, we included multiple-analyst triangulation, stakeholder checks, and peer review. We used a general inductive approach to analyze the data. Two higher-order themes emerged from our analysis of the data: organizational challenges and work-life balance strategies. The organizational challenges theme contained 2 lower-order themes: lack of autonomy and role demands. The work-life balance strategies theme contained 3 lower-order themes: prioritization of commitments, strategic boundary setting, and work-family integration. Head ATs are susceptible to experiencing work-life imbalance just as ATs in nonsupervisory roles are. Although not avoidable, the causes are manageable. Head ATs are encouraged to prioritize their personal time, make efforts to spend time away from their demanding positions, and reduce the number of additional responsibilities that can impede time available to spend away from work.

Trajectory-based morphological operators: a model for efficient image processing.

PubMed

Jimeno-Morenilla, Antonio; Pujol, Francisco A; Molina-Carmona, Rafael; Sánchez-Romero, José L; Pujol, Mar

2014-01-01

Mathematical morphology has been an area of intensive research over the last few years. Although many remarkable advances have been achieved throughout these years, there is still a great interest in accelerating morphological operations in order for them to be implemented in real-time systems. In this work, we present a new model for computing mathematical morphology operations, the so-called morphological trajectory model (MTM), in which a morphological filter will be divided into a sequence of basic operations. Then, a trajectory-based morphological operation (such as dilation, and erosion) is defined as the set of points resulting from the ordered application of the instant basic operations. The MTM approach allows working with different structuring elements, such as disks, and from the experiments, it can be extracted that our method is independent of the structuring element size and can be easily applied to industrial systems and high-resolution images.

Model reference adaptive control (MRAC)-based parameter identification applied to surface-mounted permanent magnet synchronous motor

NASA Astrophysics Data System (ADS)

Zhong, Chongquan; Lin, Yaoyao

2017-11-01

In this work, a model reference adaptive control-based estimated algorithm is proposed for online multi-parameter identification of surface-mounted permanent magnet synchronous machines. By taking the dq-axis equations of a practical motor as the reference model and the dq-axis estimation equations as the adjustable model, a standard model-reference-adaptive-system-based estimator was established. Additionally, the Popov hyperstability principle was used in the design of the adaptive law to guarantee accurate convergence. In order to reduce the oscillation of identification result, this work introduces a first-order low-pass digital filter to improve precision regarding the parameter estimation. The proposed scheme was then applied to an SPM synchronous motor control system without any additional circuits and implemented using a DSP TMS320LF2812. For analysis, the experimental results reveal the effectiveness of the proposed method.

Light-Enhanced Spin Fluctuations and d -Wave Superconductivity at a Phase Boundary

NASA Astrophysics Data System (ADS)

Wang, Yao; Chen, Cheng-Chien; Moritz, B.; Devereaux, T. P.

2018-06-01

Time-domain techniques have shown the potential of photomanipulating existing orders and inducing new states of matter in strongly correlated materials. Using time-resolved exact diagonalization, we perform numerical studies of pump dynamics in a Mott-Peierls system with competing charge and spin density waves. A light-enhanced d -wave superconductivity is observed when the system resides near a quantum phase boundary. By examining the evolution of spin, charge, and superconducting susceptibilities, we show that a subdominant state in equilibrium can be stabilized by photomanipulating the charge order to allow superconductivity to appear and dominate. This work provides an interpretation of light-induced superconductivity from the perspective of order competition and offers a promising approach for designing novel emergent states out of equilibrium.

Truly work-like work extraction via a single-shot analysis.

PubMed

Aberg, Johan

2013-01-01

The work content of non-equilibrium systems in relation to a heat bath is often analysed in terms of expectation values of an underlying random work variable. However, when optimizing the expectation value of the extracted work, the resulting extraction process is subject to intrinsic fluctuations, uniquely determined by the Hamiltonian and the initial distribution of the system. These fluctuations can be of the same order as the expected work content per se, in which case the extracted energy is unpredictable, thus intuitively more heat-like than work-like. This raises the question of the 'truly' work-like energy that can be extracted. Here we consider an alternative that corresponds to an essentially fluctuation-free extraction. We show that this quantity can be expressed in terms of a one-shot relative entropy measure introduced in information theory. This suggests that the relations between information theory and statistical mechanics, as illustrated by concepts like Maxwell's demon, Szilard engines and Landauer's principle, extends to the single-shot regime.

Adaptative synchronization in multi-output fractional-order complex dynamical networks and secure communications

NASA Astrophysics Data System (ADS)

Mata-Machuca, Juan L.; Aguilar-López, Ricardo

2018-01-01

This work deals with the adaptative synchronization of complex dynamical networks with fractional-order nodes and its application in secure communications employing chaotic parameter modulation. The complex network is composed of multiple fractional-order systems with mismatch parameters and the coupling functions are given to realize the network synchronization. We introduce a fractional algebraic synchronizability condition (FASC) and a fractional algebraic identifiability condition (FAIC) which are used to know if the synchronization and parameters estimation problems can be solved. To overcome these problems, an adaptative synchronization methodology is designed; the strategy consists in proposing multiple receiver systems which tend to follow asymptotically the uncertain transmitters systems. The coupling functions and parameters of the receiver systems are adjusted continually according to a convenient sigmoid-like adaptative controller (SLAC), until the measurable output errors converge to zero, hence, synchronization between transmitter and receivers is achieved and message signals are recovered. Indeed, the stability analysis of the synchronization error is based on the fractional Lyapunov direct method. Finally, numerical results corroborate the satisfactory performance of the proposed scheme by means of the synchronization of a complex network consisting of several fractional-order unified chaotic systems.

Observation of discrete time-crystalline order in a disordered dipolar many-body system

NASA Astrophysics Data System (ADS)

Choi, Soonwon; Choi, Joonhee; Landig, Renate; Kucsko, Georg; Zhou, Hengyun; Isoya, Junichi; Jelezko, Fedor; Onoda, Shinobu; Sumiya, Hitoshi; Khemani, Vedika; von Keyserlingk, Curt; Yao, Norman Y.; Demler, Eugene; Lukin, Mikhail D.

2017-03-01

Understanding quantum dynamics away from equilibrium is an outstanding challenge in the modern physical sciences. Out-of-equilibrium systems can display a rich variety of phenomena, including self-organized synchronization and dynamical phase transitions. More recently, advances in the controlled manipulation of isolated many-body systems have enabled detailed studies of non-equilibrium phases in strongly interacting quantum matter; for example, the interplay between periodic driving, disorder and strong interactions has been predicted to result in exotic ‘time-crystalline’ phases, in which a system exhibits temporal correlations at integer multiples of the fundamental driving period, breaking the discrete time-translational symmetry of the underlying drive. Here we report the experimental observation of such discrete time-crystalline order in a driven, disordered ensemble of about one million dipolar spin impurities in diamond at room temperature. We observe long-lived temporal correlations, experimentally identify the phase boundary and find that the temporal order is protected by strong interactions. This order is remarkably stable to perturbations, even in the presence of slow thermalization. Our work opens the door to exploring dynamical phases of matter and controlling interacting, disordered many-body systems.

Serotonergic Function, Two-Mode Models of Self-Regulation, and Vulnerability to Depression: What Depression Has in Common With Impulsive Aggression

PubMed Central

Carver, Charles S.; Johnson, Sheri L.; Joormann, Jutta

2010-01-01

Evidence from diverse literatures supports the viewpoint that two modes of self-regulation exist, a lower-order system that responds quickly to associative cues of the moment and a higher-order system that responds more reflectively and planfully; that low serotonergic function is linked to relative dominance of the lower-order system; that how dominance of the lower-order system is manifested depends on additional variables; and that low serotonergic function therefore can promote behavioral patterns as divergent as impulsive aggression and lethargic depression. Literatures reviewed include work on two-mode models; studies of brain function supporting the biological plausibility of the two-mode view and the involvement of serotonergic pathways in functions pertaining to it; and studies relating low serotonergic function to impulsiveness, aggression (including extreme violence), aspects of personality, and depression vulnerability. Substantial differences between depression and other phenomena reviewed are interpreted by proposing that depression reflects both low serotonergic function and low reward sensitivity. The article closes with brief consideration of the idea that low serotonergic function relates to even more diverse phenomena, whose natures depend in part on sensitivities of other systems. PMID:18954161

Gradient nonlinearity calibration and correction for a compact, asymmetric magnetic resonance imaging gradient system.

PubMed

Tao, S; Trzasko, J D; Gunter, J L; Weavers, P T; Shu, Y; Huston, J; Lee, S K; Tan, E T; Bernstein, M A

2017-01-21

Due to engineering limitations, the spatial encoding gradient fields in conventional magnetic resonance imaging cannot be perfectly linear and always contain higher-order, nonlinear components. If ignored during image reconstruction, gradient nonlinearity (GNL) manifests as image geometric distortion. Given an estimate of the GNL field, this distortion can be corrected to a degree proportional to the accuracy of the field estimate. The GNL of a gradient system is typically characterized using a spherical harmonic polynomial model with model coefficients obtained from electromagnetic simulation. Conventional whole-body gradient systems are symmetric in design; typically, only odd-order terms up to the 5th-order are required for GNL modeling. Recently, a high-performance, asymmetric gradient system was developed, which exhibits more complex GNL that requires higher-order terms including both odd- and even-orders for accurate modeling. This work characterizes the GNL of this system using an iterative calibration method and a fiducial phantom used in ADNI (Alzheimer's Disease Neuroimaging Initiative). The phantom was scanned at different locations inside the 26 cm diameter-spherical-volume of this gradient, and the positions of fiducials in the phantom were estimated. An iterative calibration procedure was utilized to identify the model coefficients that minimize the mean-squared-error between the true fiducial positions and the positions estimated from images corrected using these coefficients. To examine the effect of higher-order and even-order terms, this calibration was performed using spherical harmonic polynomial of different orders up to the 10th-order including even- and odd-order terms, or odd-order only. The results showed that the model coefficients of this gradient can be successfully estimated. The residual root-mean-squared-error after correction using up to the 10th-order coefficients was reduced to 0.36 mm, yielding spatial accuracy comparable to conventional whole-body gradients. The even-order terms were necessary for accurate GNL modeling. In addition, the calibrated coefficients improved image geometric accuracy compared with the simulation-based coefficients.

Analysis of measurements for solid state laser remote lidar system

NASA Technical Reports Server (NTRS)

Amzajerdian, Farzin

1995-01-01

The merits of using lidar systems for remote measurements of various atmospheric processes such as wind, turbulence, moisture, and aerosol concentration are widely recognized. Although the lidar technology has progressed considerably over the past two decades, significant research particularly in the area of solid state lidars remains to be conducted in order to fully exploit this technology. The work performed by the UAH (University of Alabama in Huntsville) personnel under this Delivery Order concentrated on analyses of measurements required in support of solid state laser remote sensing lidar systems which are to be designed, deployed, and used to measure atmospheric processes and constituents. UAH personnel has studied and recommended to NASA/MSFC the requirements of the optical systems needed to characterize the detection devices suitable for solid state wavelengths and to evaluate various heterodyne detection schemes. The 2-micron solid state laser technology was investigated and several preliminary laser designs were developed and their performance for remote sensing of atmospheric winds and clouds from a spaceborne platform were specified. In addition to the laser source and the detector, the other critical technologies necessary for global wind measurements by a spaceborne solid state coherent lidar systems were identified to be developed and demonstrated. As part of this work, an analysis was performed to determine the atmospheric wind velocity estimation accuracy using the line-of-sight measurements of a scanning coherent lidar. Under this delivery order, a computer database of materials related to the theory, development, testing, and operation of lidar systems was developed to serve as a source of information for lidar research and development.

Determining the Significance of Item Order in Randomized Problem Sets

ERIC Educational Resources Information Center

Pardos, Zachary A.; Heffernan, Neil T.

2009-01-01

Researchers who make tutoring systems would like to know which sequences of educational content lead to the most effective learning by their students. The majority of data collected in many ITS systems consist of answers to a group of questions of a given skill often presented in a random sequence. Following work that identifies which items…

Court-Appointed Special Advocate Strong Beginnings: Raising Awareness across Early Childhood and Child Welfare Systems

ERIC Educational Resources Information Center

Corr, Catherine; Danner, Natalie

2014-01-01

Abuse or neglect and disability often go hand in hand. Unfortunately, most professionals who work with maltreated young children are not aware of early childhood and disability-related resources and services available. In order to raise awareness across early childhood and child welfare systems, a five-week advanced training for volunteer child…

Intelligent transportation system (ITS) study for the Buffalo and Niagara Falls metropolitan area, Erie and Niagara Counties, New York : alternative technologies, working paper #6

DOT National Transportation Integrated Search

1997-06-18

The current paper provides a discussion of the technologies available to collect/transmit process and disseminate the needed data in order to meet the needs of the Buffalo ITS data sources, system users and their needs. The technologies which could b...

A multimodal 3D framework for fire characteristics estimation

NASA Astrophysics Data System (ADS)

Toulouse, T.; Rossi, L.; Akhloufi, M. A.; Pieri, A.; Maldague, X.

2018-02-01

In the last decade we have witnessed an increasing interest in using computer vision and image processing in forest fire research. Image processing techniques have been successfully used in different fire analysis areas such as early detection, monitoring, modeling and fire front characteristics estimation. While the majority of the work deals with the use of 2D visible spectrum images, recent work has introduced the use of 3D vision in this field. This work proposes a new multimodal vision framework permitting the extraction of the three-dimensional geometrical characteristics of fires captured by multiple 3D vision systems. The 3D system is a multispectral stereo system operating in both the visible and near-infrared (NIR) spectral bands. The framework supports the use of multiple stereo pairs positioned so as to capture complementary views of the fire front during its propagation. Multimodal registration is conducted using the captured views in order to build a complete 3D model of the fire front. The registration process is achieved using multisensory fusion based on visual data (2D and NIR images), GPS positions and IMU inertial data. Experiments were conducted outdoors in order to show the performance of the proposed framework. The obtained results are promising and show the potential of using the proposed framework in operational scenarios for wildland fire research and as a decision management system in fighting.

Compendium of Authenticated Systems and Logistics Terms, Definitions and Acronyms

DTIC Science & Technology

1981-04-01

assigned for storage operations, within OTHER NON WAREHOUSE SPACE a structure designed for other than storage Space being used for storage within any...opposed to Any work done in order to correct rejected work. administrative), design (engineering design and (AFLCM1 74-2) drafting), experimental test...study. (principal or designated representative) authorized practices, methodology , or procedures involved in to request, receive, store, and account

Underwater manipulator's kinematic analysis for sustainable and energy efficient water hydraulics system

NASA Astrophysics Data System (ADS)

Hassan, Siti Nor Habibah; Yusof, Ahmad Anas; Tuan, Tee Boon; Saadun, Mohd Noor Asril; Ibrahim, Mohd Qadafie; Nik, Wan Mohd Norsani Wan

2015-05-01

In promoting energy saving and sustainability, this paper presents research development of water hydraulics manipulator test rig for underwater application. Kinematic analysis of the manipulator has been studied in order to identify the workspace of the fabricated manipulator. The workspace is important as it will define the working area suitable to be developed on the test rig, in order to study the effectiveness of using water hydraulics system for underwater manipulation application. Underwater manipulator that has the ability to utilize the surrounding sea water itself as the power and energy carrier should have better advantages over sustainability and performance.

Strangeness S =-1 hyperon-nucleon scattering in covariant chiral effective field theory

NASA Astrophysics Data System (ADS)

Li, Kai-Wen; Ren, Xiu-Lei; Geng, Li-Sheng; Long, Bingwei

2016-07-01

Motivated by the successes of covariant baryon chiral perturbation theory in one-baryon systems and in heavy-light systems, we study relevance of relativistic effects in hyperon-nucleon interactions with strangeness S =-1 . In this exploratory work, we follow the covariant framework developed by Epelbaum and Gegelia to calculate the Y N scattering amplitude at leading order. By fitting the five low-energy constants to the experimental data, we find that the cutoff dependence is mitigated, compared with the heavy-baryon approach. Nevertheless, the description of the experimental data remains quantitatively similar at leading order.

The Impact of a Health IT Changeover on Medical Imaging Department Work Processes and Turnaround Times

PubMed Central

Georgiou, A.; Lymer, S.; Hordern, A.; Ridley, L.; Westbrook, J.

2015-01-01

Summary Objectives To assess the impact of introducing a new Picture Archiving and Communication System (PACS) and Radiology Information System (RIS) on: (i) Medical Imaging work processes; and (ii) turnaround times (TATs) for x-ray and CT scan orders initiated in the Emergency Department (ED). Methods We employed a mixed method study design comprising: (i) semi-structured interviews with Medical Imaging Department staff; and (ii) retrospectively extracted ED data before (March/April 2010) and after (March/April 2011 and 2012) the introduction of a new PACS/RIS. TATs were calculated as: processing TAT (median time from image ordering to examination) and reporting TAT (median time from examination to final report). Results Reporting TAT for x-rays decreased significantly after introduction of the new PACS/RIS; from a median of 76 hours to 38 hours per order (p<.0001) for patients discharged from the ED, and from 84 hours to 35 hours (p<.0001) for patients admitted to hospital. Medical Imaging staff reported that the changeover to the new PACS/RIS led to gains in efficiency, particularly regarding the accessibility of images and patient-related information. Nevertheless, assimilation of the new PACS/RIS with existing Departmental work processes was considered inadequate and in some instances unsafe. Issues highlighted related to the synchronization of work tasks (e.g., porter arrangements) and the material set up of the work place (e.g., the number and location of computers). Conclusions The introduction of new health IT can be a “double-edged sword” providing improved efficiency but at the same time introducing potential hazards affecting the effectiveness of the Medical Imaging Department. PMID:26448790

Finding international Landsat data online

USGS Publications Warehouse

,

1997-01-01

The Global Land Information System (GLIS) lists Landsat multispectral scanner (MSS) and thematic mapper (TM) data available from the participating international ground stations shown below. These databases of the Landsat Ground Station Operations Working Group (LGSOWG) can be searched, but not ordered, using GLIS. To order Landsat scenes identified on the GLIS data search, contact the international ground station where those scenes are available, indicated by the second character of the Entity ID.

Socially Coherent Negotiation for Cooperative Multiagent Systems

DTIC Science & Technology

2008-07-16

of altruism by substituting the preferences of others for one’s own. • It is assumed that each member will...approximation) — it is not a species of bounded rationality. (c) It naturally extends to the multi-agent case, thereby providing a natural frame- work...are mass functions, permits a natural way to aggregate the preference orderings of the individuals to form a group preference ordering. As is well

A new method to generate large order low temperature expansions for discrete spin models

NASA Astrophysics Data System (ADS)

Bhanot, Gyan

1993-03-01

I describe work done in collaboration with Michael Creutz at BNL and Jan Lacki at IAS Princeton. We have developed a method to generate very high order low temperature (weak coupling) expansions for discrete spin systems. For the 3-d and 4-d Ising model, we give results for the low temperature expansion of the average free energy to 50 and 44 excited bonds respectively.

Salary Management System for Small and Medium-sized Enterprises

NASA Astrophysics Data System (ADS)

Hao, Zhang; Guangli, Xu; Yuhuan, Zhang; Yilong, Lei

Small and Medium-sized Enterprises (SMEs) in the process of wage entry, calculation, the total number are needed to be done manually in the past, the data volume is quite large, processing speed is low, and it is easy to make error, which is resulting in low efficiency. The main purpose of writing this paper is to present the basis of salary management system, establish a scientific database, the computer payroll system, using the computer instead of a lot of past manual work in order to reduce duplication of staff labor, it will improve working efficiency.This system combines the actual needs of SMEs, through in-depth study and practice of the C/S mode, PowerBuilder10.0 development tools, databases and SQL language, Completed a payroll system needs analysis, database design, application design and development work. Wages, departments, units and personnel database file are included in this system, and have data management, department management, personnel management and other functions, through the control and management of the database query, add, delete, modify, and other functions can be realized. This system is reasonable design, a more complete function, stable operation has been tested to meet the basic needs of the work.

High-order Path Integral Monte Carlo methods for solving strongly correlated fermion problems

NASA Astrophysics Data System (ADS)

Chin, Siu A.

2015-03-01

In solving for the ground state of a strongly correlated many-fermion system, the conventional second-order Path Integral Monte Carlo method is plagued with the sign problem. This is due to the large number of anti-symmetric free fermion propagators that are needed to extract the square of the ground state wave function at large imaginary time. In this work, I show that optimized fourth-order Path Integral Monte Carlo methods, which uses no more than 5 free-fermion propagators, in conjunction with the use of the Hamiltonian energy estimator, can yield accurate ground state energies for quantum dots with up to 20 polarized electrons. The correlations are directly built-in and no explicit wave functions are needed. This work is supported by the Qatar National Research Fund NPRP GRANT #5-674-1-114.

Introduction to the internal fluid mechanics research session

NASA Technical Reports Server (NTRS)

Miller, Brent A.; Povinelli, Louis A.

1990-01-01

Internal fluid mechanics research at LeRC is directed toward an improved understanding of the important flow physics affecting aerospace propulsion systems, and applying this improved understanding to formulate accurate predictive codes. To this end, research is conducted involving detailed experimentation and analysis. The following three papers summarize ongoing work and indicate future emphasis in three major research thrusts: inlets, ducts, and nozzles; turbomachinery; and chemical reacting flows. The underlying goal of the research in each of these areas is to bring internal computational fluid mechanic to a state of practical application for aerospace propulsion systems. Achievement of this goal requires that carefully planned and executed experiments be conducted in order to develop and validate useful codes. It is critical that numerical code development work and experimental work be closely coupled. The insights gained are represented by mathematical models that form the basis for code development. The resultant codes are then tested by comparing them with appropriate experiments in order to ensure their validity and determine their applicable range. The ultimate user community must be a part of this process to assure relevancy of the work and to hasten its practical application. Propulsion systems are characterized by highly complex and dynamic internal flows. Many complex, 3-D flow phenomena may be present, including unsteadiness, shocks, and chemical reactions. By focusing on specific portions of a propulsion system, it is often possible to identify the dominant phenomena that must be understood and modeled for obtaining accurate predictive capability. The three major research thrusts serve as a focus leading to greater understanding of the relevant physics and to an improvement in analytic tools. This in turn will hasten continued advancements in propulsion system performance and capability.

Between disorder and order: A case study of power law

NASA Astrophysics Data System (ADS)

Cao, Yong; Zhao, Youjie; Yue, Xiaoguang; Xiong, Fei; Sun, Yongke; He, Xin; Wang, Lichao

2016-08-01

Power law is an important feature of phenomena in long memory behaviors. Zipf ever found power law in the distribution of the word frequencies. In physics, the terms order and disorder are Thermodynamic or statistical physics concepts originally and a lot of research work has focused on self-organization of the disorder ingredients of simple physical systems. It is interesting what make disorder-order transition. We devise an experiment-based method about random symbolic sequences to research regular pattern between disorder and order. The experiment results reveal power law is indeed an important regularity in transition from disorder to order. About these results the preliminary study and analysis has been done to explain the reasons.

Selection of active elements in system reduction of vibration

NASA Astrophysics Data System (ADS)

Bialas, K.

2016-11-01

This work presents non-classical method of design of mechatronic systems. The purpose of this paper is also introduces synthesis of mechatronic system understand as design of mechatronic systems. The synthesis may be applied to modify the already existing systems in order to achieve a desired result. The system was consisted from mechanical and electrical elements. Electrical elements were used as subsystem reducing unwanted vibration of mechanical system. Electrical elements can be realized in the form of coils with movable core. The system was modelled in Matlab Simulink.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koizumi, Mitsuo; Oshima, Masumi; Toh, Yosuke

In order to reduce the time and effort of the daily task of refilling Dewar vessels of Ge detectors with liquid nitrogen (LN{sub 2}), we have developed an automatic LN{sub 2} filling system equipped with a LN{sub 2} plant. With this system, we were freed from the work of LN{sub 2} filling. Such an LN{sub 2} filling system is useful for moderate-scale Ge detector arrays consisting of fewer than 20 Ge detectors.

76 FR 55859 - Federal Motor Vehicle Safety Standards No. 121; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

...- trailer on dry pavement, a highly skilled test driver may be able to achieve the shortest possible... maintained in proper working order, it would not provide the improved steering control as designed. That is...

NREL Leads Effort to Get Traffic Moving in the Right Direction | News |

Science.gov Websites

fuels. This emerging approach to sustainable transportation augments ongoing work by NREL that is aimed at taking a systems approach to the broader network of travelers, services, and environments in order

Stability Error Budget for an Aggressive Coronagraph on a 3.8 m Telescope

NASA Technical Reports Server (NTRS)

Shaklan, Stuart B.; Marchen, Luis; Krist, John; Rud, Mayer

2011-01-01

We evaluate in detail the stability requirements for a band-limited coronagraph with an inner working angle as small as 2 lambda/D coupled to an off-axis, 3.8-m diameter telescope. We have updated our methodologies since presenting a stability error budget for the Terrestrial Planet Finder Coronagraph mission that worked at 4 lambda/D and employed an 8th-order mask to reduce aberration sensitives. In the previous work, we determined the tolerances relative to the total light leaking through the coronagraph. Now, we separate the light into a radial component, which is readily separable from a planet signal, and an azimuthal component, which is easily confused with a planet signal. In the current study, throughput considerations require a 4th-order coronagraph. This, combined with the more aggressive working angle, places extraordinarily tight requirements on wavefront stability and opto-mechanical stability. We find that the requirements are driven mainly by coma that leaks around the coronagraph mask and mimics the localized signal of a planet, and pointing errors that scatter light into the background, decreasing SNR. We also show how the requirements would be relaxed if a low-order aberration detection system could be employed.

Design and Evaluation of 10-Gbps Inter-satellite Optical Wireless Communication Link for Improved Performance

NASA Astrophysics Data System (ADS)

Gupta, Amit; Nagpal, Shaina

2017-05-01

Inter-satellite optical wireless communication (IsOWC) systems can be chosen over existing microwave satellite systems for deploying in space in the future due to their high bandwidth, small size, light weight, low power and low cost. However, the IsOWC system suffers from various attenuations due to weather conditions, turbulence or scintillations which limit its performance and decreases its availability. So, in order to improve the performance, IsOWC system using directly modulated laser source is proposed in this work. The system is designed and evaluated to be suitable for high data rate transmissions up to 10 Gbps. The performance of the system is investigated in order to reduce the cost and complexity of link and improving the quality of information signal. Further the proposed IsOWC system is analysed using BER analyser, power meter and oscilloscope Visualizer.

The RFad Method--a new fatigue recovery time assessment for industrial activities.

PubMed

Silva e Santos, Marcello; Vidal, Mario Cesar Rodriguez; Moreira, Sergio Bastos

2012-01-01

This paper presents a study about fatigue recovery time assessment processes in work activities. It came about due to a demand presented by an automotive industry giant, in need of updating existing cycle time sheets and TAKT time parameters. The company decided to hire an Ergonomics Laboratory with ties to a major Brazilian University in order to evaluate current conditions and establish a new method to either calculate recovery times or validate existing assessment criteria, based in the ergonomics evaluation of the work activities. It is clear that there has been evident evolution in the industrial sector in the past two decades. It brought up fast modernization of industrial processes, not only in production but also in terms of management systems. Due to improved computer and robotics systems, combined with overall operational advancements - like the use of lighter hand tools and more effective hoist systems - most work activities have had its physical effort requirements reduced in the past decades. Thus, compensation factors built into production times need to be reviewed in order to avoid unnecessary costs associated to them. By using ergonomics considerations, we prevent simply removing the physical variables built in rest time calculations without taking on account, for example, additional cognitive load represented by the use of more sophisticated pieces of equipment.

[Implementation of ECG Monitoring System Based on Internet of Things].

PubMed

Lu, Liangliang; Chen, Minya

2015-11-01

In order to expand the capabilities of hospital's traditional ECG device and enhance medical staff's work efficiency, an ECG monitoring system based on internet of things is introduced. The system can monitor ECG signals in real time and analyze data using ECG sensor, PDA, Web servers, which embeds C language, Android systems, .NET, wireless network and other technologies. After experiments, it can be showed that the system has high reliability and stability and can bring the convenience to medical staffs.

Management of high-risk perioperative systems.

PubMed

Dain, Steven

2006-06-01

The perioperative system is a complex system that requires people, materials, and processes to come together in a highly ordered and timely manner. However, when working in this high-risk system, even well-organized, knowledgeable, vigilant, and well-intentioned individuals will eventually make errors. All systems need to be evaluated on a continual basis to reduce the risk of errors, make errors more easily recognizable, and provide methods for error mitigation. A simple approach to risk management that may be applied in clinical medicine is discussed.

A device for the color measurement and detection of spots on the skin.

PubMed

Pladellorens, Josep; Pintó, Agustí; Segura, Jordi; Cadevall, Cristina; Antó, Joan; Pujol, Jaume; Vilaseca, Meritxell; Coll, Joaquín

2008-02-01

In this work, we present a new and fast easy-to-use device that allows the measurement of color and the detection of spots on the human skin. The developed device is highly practical for relatively untrained operators and uses inexpensive consumer equipment, such as a CCD color camera, a light source composed of LEDs and a laptop. The knowledge of the color of the skin and the detection of spots can be useful in several areas such as in dermatology applications, the cosmetics industry, the biometrics field, health care, etc. In order to perform these measurements the system takes a picture of the skin. After that, the operator selects the region of the skin to be analyzed on the displayed image and the system provides the CIELAB color coordinates, the chroma and the ITA parameter (Individual Tipology Angle), allowing the comparison with other reference images by means of CIELAB color differences. The system also detects spots, such as freckles, age spots, sunspots, pimples, black heads, etc., in a determined region, allowing the objective measurement of their size and area. The colorimetric information provided by a conventional spectrophotometer for the tested samples and the computed values obtained with the new developed system are quite similar, meaning that the developed system can be used to perform color measurements with relatively high accuracy. On the other hand, the feasibility of the system in order to detect and measure spots on the human skin has also been checked over a great amount of images, obtaining results with high precision. In this work, we present a new system that may be very useful in order to measure the color and to detect spots of the skin. Its portability and easy applicability will be very useful in dermatologic and cosmetic studies.

Adjustment of gripping force by optical systems

NASA Astrophysics Data System (ADS)

Jalba, C. K.; Barz, C.

2018-01-01

With increasing automation, robotics also requires ever more intelligent solutions in the handling of various tasks. In this context, many grippers must also be re-designed. For this, they must always be adapted for different requirements. The equipment of the gripper systems with sensors should help to make the gripping process more intelligent. In order to achieve such objectives, optical systems can also be used. This work analyzes how the gripping force can be adjusted by means of an optical recognition. The result of this work is the creation of a connection between optical recognition, tolerances, gripping force and real-time control. In this way, algorithms can be created, with the aid of which robot grippers as well as other gripping systems become more intelligent.

Unraveling surface enabled magnetic phenomena in low dimensional systems

NASA Astrophysics Data System (ADS)

Baljozovic, Milos; Girovsky, Jan; Nowakowski, Jan; Ali, Md Ehesan; Rossmann, Harald; Nijs, Thomas; Aeby, Elise; Nowakowska, Sylwia; Siewert, Dorota; Srivastava, Gitika; WäCkerlin, Christian; Dreiser, Jan; Decurtins, Silvio; Liu, Shi-Xia; Oppeneer, Peter M.; Jung, Thomas A.; Ballav, Nirmalya

Molecular spin systems with controllable interactions are of both fundamental and applied importance. These systems help us to better understand the fundamental origins of the interactions involved in low dimensional magnetic systems and to put them in the framework of existing models towards their further development. Following our first observation of exchange induced magnetic ordering in paramagnetic porphyrins adsorbed on ferromagnetic Co surface we showed that magnetic properties of such molecules can be controllably altered upon exposure to chemical and physical stimuli. In our most recent work it was shown that a synthetically programmed co-assembly of Fe and Mn phthalocyanines can also be realized on diamagnetic Au(111) surfaces where it induces long-range 2D ferrimagnetic order, at first glance in conflict with the Mermin-Wagner theory. Here we provide evidence for the first direct observation of such ordering from STM/STS and XMCD data and from DFT +U calculations demonstrating key role of the Au(111) surface states in mediating AFM RKKY coupling of the Kondo underscreened magnetic moments.

Dynamic least-cost optimisation of wastewater system remedial works requirements.

PubMed

Vojinovic, Z; Solomatine, D; Price, R K

2006-01-01

In recent years, there has been increasing concern for wastewater system failure and identification of optimal set of remedial works requirements. So far, several methodologies have been developed and applied in asset management activities by various water companies worldwide, but often with limited success. In order to fill the gap, there are several research projects that have been undertaken in exploring various algorithms to optimise remedial works requirements, but mostly for drinking water supply systems, and very limited work has been carried out for the wastewater assets. Some of the major deficiencies of commonly used methods can be found in either one or more of the following aspects: inadequate representation of systems complexity, incorporation of a dynamic model into the decision-making loop, the choice of an appropriate optimisation technique and experience in applying that technique. This paper is oriented towards resolving these issues and discusses a new approach for the optimisation of wastewater systems remedial works requirements. It is proposed that the optimal problem search is performed by a global optimisation tool (with various random search algorithms) and the system performance is simulated by the hydrodynamic pipe network model. The work on assembling all required elements and the development of an appropriate interface protocols between the two tools, aimed to decode the potential remedial solutions into the pipe network model and to calculate the corresponding scenario costs, is currently underway.

Spin entanglement in elastic electron scattering from quasi-one electron atoms

NASA Astrophysics Data System (ADS)

Fonseca Dos Santos, Samantha; Bartschat, Klaus

2017-04-01

We have extended our work on e-Li collisions to investigate low-energy elastic electron collisions with atomic hydrogen and other alkali targets (Na,K,Rb). These systems have been suggested for the possibility of continuously varying the degree of entanglement between the elastically scattered projectile and the valence electron. In order to estimate how well such a scheme may work in practice, we carried out overview calculations for energies between 0 and 10 eV and the full range of scattering angles 0° -180° . In addition to the relative exchange asymmetry parameter that characterizes the entanglement, we present the differential cross section in order to estimate whether the count rates in the most interesting energy-angle regimes are sufficient to make such experiments feasible in practice. Work supported by the NSF under PHY-1403245.

Monitoring by forward scatter radar techniques: an improved second-order analytical model

NASA Astrophysics Data System (ADS)

Falconi, Marta Tecla; Comite, Davide; Galli, Alessandro; Marzano, Frank S.; Pastina, Debora; Lombardo, Pierfrancesco

2017-10-01

In this work, a second-order phase approximation is introduced to provide an improved analytical model of the signal received in forward scatter radar systems. A typical configuration with a rectangular metallic object illuminated while crossing the baseline, in far- or near-field conditions, is considered. An improved second-order model is compared with a simplified one already proposed by the authors and based on a paraxial approximation. A phase error analysis is carried out to investigate benefits and limitations of the second-order modeling. The results are validated by developing full-wave numerical simulations implementing the relevant scattering problem on a commercial tool.

Ultracold Realization of AntiFerromagenteic Order

NASA Astrophysics Data System (ADS)

Shrestha, Uttam

2011-03-01

We investigate numerically the experimental feasibility of observing the antiferromagnetic (AF) order in the bosonic mixtures of rubidium (87 Rb) and potassium (41 K) in a two-dimensional optical lattice with external trapping potential. Within the mean-field approximation we have found the ground states which, for a specific range of parameters such as inter-species interactions and lattice height, interpolate from phase separation to the AF order. For the moderate lattice heights the coexistence of the Mott and AF phase is possible for rubidium atoms while the potassium atoms remain superfluid with overlapped AF phase. In our view there has not been any study on AF order in two-component systems when one component remains in the superfluid phase while the other is in the Mott phase. Therefore, this observation may provide a novel regime for studying quantum magnetism in ultracold systems. This work was supported by the EU Contract EU STREP NAMEQUAM.

Robust Takagi-Sugeno fuzzy control for fractional order hydro-turbine governing system.

PubMed

Wang, Bin; Xue, Jianyi; Wu, Fengjiao; Zhu, Delan

2016-11-01

A robust fuzzy control method for fractional order hydro-turbine governing system (FOHGS) in the presence of random disturbances is investigated in this paper. Firstly, the mathematical model of FOHGS is introduced, and based on Takagi-Sugeno (T-S) fuzzy rules, the generalized T-S fuzzy model of FOHGS is presented. Secondly, based on fractional order Lyapunov stability theory, a novel T-S fuzzy control method is designed for the stability control of FOHGS. Thirdly, the relatively loose sufficient stability condition is acquired, which could be transformed into a group of linear matrix inequalities (LMIs) via Schur complement as well as the strict mathematical derivation is given. Furthermore, the control method could resist random disturbances, which shows the good robustness. Simulation results indicate the designed fractional order T-S fuzzy control scheme works well compared with the existing method. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Articulatory rehearsal in verbal working memory: a possible neurocognitive endophenotype that differentiates between schizophrenia and schizoaffective disorder.

PubMed

Gruber, Oliver; Gruber, Eva; Falkai, Peter

2006-09-11

Recent fMRI studies have identified brain systems underlying different components of working memory in healthy individuals. The aim of this study was to compare the functional integrity of these neural networks in terms of behavioural performance in patients with schizophrenia, schizoaffective disorder and healthy controls. In order to detect specific working memory deficits based on dysfunctions of underlying brain circuits we used the same verbal and visuospatial Sternberg item-recognition tasks as in previous neuroimaging studies. Clinical and performance data from matched groups consisting of 14 subjects each were statistically analyzed. Schizophrenic patients exhibited pronounced impairments of both verbal and visuospatial working memory, whereas verbal working memory performance was preserved in schizoaffective patients. The findings provide first evidence that dysfunction of a brain system subserving articulatory rehearsal could represent a biological marker which differentiates between schizophrenia and schizoaffective disorder.

Architecture and implementation for a system enabling smartphones to access smart card based healthcare records.

PubMed

Karampelas, Vasilios; Pallikarakis, Nicholas; Mantas, John

2013-01-01

The healthcare researchers', academics' and practitioners' interest concerning the development of Healthcare Information Systems has been on a steady rise for the last decades. Fueling this steady rise has been the healthcare professional need of quality information, in every healthcare provision incident, whenever and wherever this incident may take place. In order to address this need a truly mobile health care system is required, one that will be able to provide a healthcare provider with accurate patient-related information regardless of the time and place that healthcare is provided. In order to fulfill this role the present study proposes the architecture for a Healthcare Smartcard system, which provides authenticated healthcare professionals with remote mobile access to a Patient's Healthcare Record, through their Smartphone. Furthermore the research proceeds to develop a working prototype system.

ISE-based sensor array system for classification of foodstuffs

NASA Astrophysics Data System (ADS)

Ciosek, Patrycja; Sobanski, Tomasz; Augustyniak, Ewa; Wróblewski, Wojciech

2006-01-01

A system composed of an array of polymeric membrane ion-selective electrodes and a pattern recognition block—a so-called 'electronic tongue'—was used for the classification of liquid samples: milk, fruit juice and tonic. The task of this system was to automatically recognize a brand of the product. To analyze the measurement set-up responses various non-parametric classifiers such as k-nearest neighbours, a feedforward neural network and a probabilistic neural network were used. In order to enhance the classification ability of the system, standard model solutions of salts were measured (in order to take into account any variation in time of the working parameters of the sensors). This system was capable of recognizing the brand of the products with accuracy ranging from 68% to 100% (in the case of the best classifier).

Precision pointing and control of flexible spacecraft

NASA Technical Reports Server (NTRS)

Bantell, M. H., Jr.

1987-01-01

The problem and long term objectives for the precision pointing and control of flexible spacecraft are given. The four basic objectives are stated in terms of two principle tasks. Under Task 1, robust low order controllers, improved structural modeling methods for control applications and identification methods for structural dynamics are being developed. Under Task 2, a lab test experiment for verification of control laws and system identification algorithms is being developed. For Task 1, work has focused on robust low order controller design and some initial considerations for structural modeling in control applications. For Task 2, work has focused on experiment design and fabrication, along with sensor selection and initial digital controller implementation. Conclusions are given.

Improved diffusion Monte Carlo propagators for bosonic systems using Itô calculus

NASA Astrophysics Data System (ADS)

Hâkansson, P.; Mella, M.; Bressanini, Dario; Morosi, Gabriele; Patrone, Marta

2006-11-01

The construction of importance sampled diffusion Monte Carlo (DMC) schemes accurate to second order in the time step is discussed. A central aspect in obtaining efficient second order schemes is the numerical solution of the stochastic differential equation (SDE) associated with the Fokker-Plank equation responsible for the importance sampling procedure. In this work, stochastic predictor-corrector schemes solving the SDE and consistent with Itô calculus are used in DMC simulations of helium clusters. These schemes are numerically compared with alternative algorithms obtained by splitting the Fokker-Plank operator, an approach that we analyze using the analytical tools provided by Itô calculus. The numerical results show that predictor-corrector methods are indeed accurate to second order in the time step and that they present a smaller time step bias and a better efficiency than second order split-operator derived schemes when computing ensemble averages for bosonic systems. The possible extension of the predictor-corrector methods to higher orders is also discussed.

Development of Boundary Condition Independent Reduced Order Thermal Models using Proper Orthogonal Decomposition

NASA Astrophysics Data System (ADS)

Raghupathy, Arun; Ghia, Karman; Ghia, Urmila

2008-11-01

Compact Thermal Models (CTM) to represent IC packages has been traditionally developed using the DELPHI-based (DEvelopment of Libraries of PHysical models for an Integrated design) methodology. The drawbacks of this method are presented, and an alternative method is proposed. A reduced-order model that provides the complete thermal information accurately with less computational resources can be effectively used in system level simulations. Proper Orthogonal Decomposition (POD), a statistical method, can be used to reduce the order of the degree of freedom or variables of the computations for such a problem. POD along with the Galerkin projection allows us to create reduced-order models that reproduce the characteristics of the system with a considerable reduction in computational resources while maintaining a high level of accuracy. The goal of this work is to show that this method can be applied to obtain a boundary condition independent reduced-order thermal model for complex components. The methodology is applied to the 1D transient heat equation.

A social cybernetic analysis of simulation-based, remotely delivered medical skills training in an austere environment: developing a test bed for spaceflight medicine.

PubMed

Musson, David M; Doyle, Thomas E

2012-01-01

This paper describes analysis of medical skills training exercises that were conducted at an arctic research station. These were conducted as part of an ongoing effort to establish high fidelity medical simulation test bed capabilities in remote and extreme "space analogue" environments for the purpose studying medical care in spaceflight. The methodological orientation followed by the authors is that of "second order cybernetics," or the science of studying human systems where the observer is involved within the system in question. Analyses presented include the identification of three distinct phases of the training activity, and two distinct levels of work groups-- termed "first-order teams" and "second-order teams." Depending on the phase of activity, first-order and second-order teams are identified, each having it own unique structure, composition, communications, goals, and challenges. Several specific teams are highlighted as case examples. Limitations of this approach are discussed, as are potential benefits to ongoing and planned research activity in this area.

Development and Verification of the Charring Ablating Thermal Protection Implicit System Solver

NASA Technical Reports Server (NTRS)

Amar, Adam J.; Calvert, Nathan D.; Kirk, Benjamin S.

2010-01-01

The development and verification of the Charring Ablating Thermal Protection Implicit System Solver is presented. This work concentrates on the derivation and verification of the stationary grid terms in the equations that govern three-dimensional heat and mass transfer for charring thermal protection systems including pyrolysis gas flow through the porous char layer. The governing equations are discretized according to the Galerkin finite element method with first and second order implicit time integrators. The governing equations are fully coupled and are solved in parallel via Newton's method, while the fully implicit linear system is solved with the Generalized Minimal Residual method. Verification results from exact solutions and the Method of Manufactured Solutions are presented to show spatial and temporal orders of accuracy as well as nonlinear convergence rates.

Development and Verification of the Charring, Ablating Thermal Protection Implicit System Simulator

NASA Technical Reports Server (NTRS)

Amar, Adam J.; Calvert, Nathan; Kirk, Benjamin S.

2011-01-01

The development and verification of the Charring Ablating Thermal Protection Implicit System Solver (CATPISS) is presented. This work concentrates on the derivation and verification of the stationary grid terms in the equations that govern three-dimensional heat and mass transfer for charring thermal protection systems including pyrolysis gas flow through the porous char layer. The governing equations are discretized according to the Galerkin finite element method (FEM) with first and second order fully implicit time integrators. The governing equations are fully coupled and are solved in parallel via Newton s method, while the linear system is solved via the Generalized Minimum Residual method (GMRES). Verification results from exact solutions and Method of Manufactured Solutions (MMS) are presented to show spatial and temporal orders of accuracy as well as nonlinear convergence rates.

Development of Flight-Test Performance Estimation Techniques for Small Unmanned Aerial Systems

NASA Astrophysics Data System (ADS)

McCrink, Matthew Henry

This dissertation provides a flight-testing framework for assessing the performance of fixed-wing, small-scale unmanned aerial systems (sUAS) by leveraging sub-system models of components unique to these vehicles. The development of the sub-system models, and their links to broader impacts on sUAS performance, is the key contribution of this work. The sub-system modeling and analysis focuses on the vehicle's propulsion, navigation and guidance, and airframe components. Quantification of the uncertainty in the vehicle's power available and control states is essential for assessing the validity of both the methods and results obtained from flight-tests. Therefore, detailed propulsion and navigation system analyses are presented to validate the flight testing methodology. Propulsion system analysis required the development of an analytic model of the propeller in order to predict the power available over a range of flight conditions. The model is based on the blade element momentum (BEM) method. Additional corrections are added to the basic model in order to capture the Reynolds-dependent scale effects unique to sUAS. The model was experimentally validated using a ground based testing apparatus. The BEM predictions and experimental analysis allow for a parameterized model relating the electrical power, measurable during flight, to the power available required for vehicle performance analysis. Navigation system details are presented with a specific focus on the sensors used for state estimation, and the resulting uncertainty in vehicle state. Uncertainty quantification is provided by detailed calibration techniques validated using quasi-static and hardware-in-the-loop (HIL) ground based testing. The HIL methods introduced use a soft real-time flight simulator to provide inertial quality data for assessing overall system performance. Using this tool, the uncertainty in vehicle state estimation based on a range of sensors, and vehicle operational environments is presented. The propulsion and navigation system models are used to evaluate flight-testing methods for evaluating fixed-wing sUAS performance. A brief airframe analysis is presented to provide a foundation for assessing the efficacy of the flight-test methods. The flight-testing presented in this work is focused on validating the aircraft drag polar, zero-lift drag coefficient, and span efficiency factor. Three methods are detailed and evaluated for estimating these design parameters. Specific focus is placed on the influence of propulsion and navigation system uncertainty on the resulting performance data. Performance estimates are used in conjunction with the propulsion model to estimate the impact sensor and measurement uncertainty on the endurance and range of a fixed-wing sUAS. Endurance and range results for a simplistic power available model are compared to the Reynolds-dependent model presented in this work. Additional parameter sensitivity analysis related to state estimation uncertainties encountered in flight-testing are presented. Results from these analyses indicate that the sub-system models introduced in this work are of first-order importance, on the order of 5-10% change in range and endurance, in assessing the performance of a fixed-wing sUAS.

Spacelab output processing system architectural study

NASA Technical Reports Server (NTRS)

1977-01-01

Two different system architectures are presented. The two architectures are derived from two different data flows within the Spacelab Output Processing System. The major differences between these system architectures are in the position of the decommutation function (the first architecture performs decommutation in the latter half of the system and the second architecture performs that function in the front end of the system). In order to be examined, the system was divided into five stand-alone subsystems; Work Assembler, Mass Storage System, Output Processor, Peripheral Pool, and Resource Monitor. The work load of each subsystem was estimated independent of the specific devices to be used. The candidate devices were surveyed from a wide sampling of off-the-shelf devices. Analytical expressions were developed to quantify the projected workload in conjunction with typical devices which would adequately handle the subsystem tasks. All of the study efforts were then directed toward preparing performance and cost curves for each architecture subsystem.

Modification split type air conditioning unit by installing internal heat exchanger and condenser precooling

NASA Astrophysics Data System (ADS)

Ambarita, H.

2018-03-01

In this paper, a modified of air conditioning (AC) system is proposed. In the modified system, an internal heat exchanger and condenser precooling unit are installed. The objective is to explore the effect of the additional equipment to the performance of the system. An AC with compressor power of 1 PK is modified and compared with the original one. The results show that ER of the modified system is higher than the original one in order of 3.6%. The work of the compressor of the modified system is 12.5% lower than work of the compressor without modification. Finally, the COP of the modified system is 11.71% higher than the original one. These facts reveal that the combination of IHX and condenser precooling shows positive impact on the performance of the AC. It is recommended to use the modified system to improve the energy efficiency of the Air Conditioning system.

A high-order staggered finite-element vertical discretization for non-hydrostatic atmospheric models

DOE PAGES

Guerra, Jorge E.; Ullrich, Paul A.

2016-06-01

Atmospheric modeling systems require economical methods to solve the non-hydrostatic Euler equations. Two major differences between hydrostatic models and a full non-hydrostatic description lies in the vertical velocity tendency and numerical stiffness associated with sound waves. In this work we introduce a new arbitrary-order vertical discretization entitled the staggered nodal finite-element method (SNFEM). Our method uses a generalized discrete derivative that consistently combines the discontinuous Galerkin and spectral element methods on a staggered grid. Our combined method leverages the accurate wave propagation and conservation properties of spectral elements with staggered methods that eliminate stationary (2Δ x) modes. Furthermore, high-order accuracymore » also eliminates the need for a reference state to maintain hydrostatic balance. In this work we demonstrate the use of high vertical order as a means of improving simulation quality at relatively coarse resolution. We choose a test case suite that spans the range of atmospheric flows from predominantly hydrostatic to nonlinear in the large-eddy regime. Lastly, our results show that there is a distinct benefit in using the high-order vertical coordinate at low resolutions with the same robust properties as the low-order alternative.« less

A high-order staggered finite-element vertical discretization for non-hydrostatic atmospheric models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guerra, Jorge E.; Ullrich, Paul A.

Atmospheric modeling systems require economical methods to solve the non-hydrostatic Euler equations. Two major differences between hydrostatic models and a full non-hydrostatic description lies in the vertical velocity tendency and numerical stiffness associated with sound waves. In this work we introduce a new arbitrary-order vertical discretization entitled the staggered nodal finite-element method (SNFEM). Our method uses a generalized discrete derivative that consistently combines the discontinuous Galerkin and spectral element methods on a staggered grid. Our combined method leverages the accurate wave propagation and conservation properties of spectral elements with staggered methods that eliminate stationary (2Δ x) modes. Furthermore, high-order accuracymore » also eliminates the need for a reference state to maintain hydrostatic balance. In this work we demonstrate the use of high vertical order as a means of improving simulation quality at relatively coarse resolution. We choose a test case suite that spans the range of atmospheric flows from predominantly hydrostatic to nonlinear in the large-eddy regime. Lastly, our results show that there is a distinct benefit in using the high-order vertical coordinate at low resolutions with the same robust properties as the low-order alternative.« less

Low-Power Baseline Test Results for the GPU 3 Stirling Engine

NASA Technical Reports Server (NTRS)

Thieme, L. G.

1979-01-01

A 7.5 kW (10 hp) Stirling engine was converted to a research configuration in order to obtain data for validating Stirling-cycle computer simulations. Test results for a range of heater-tube gas temperatures, mean compression-space pressures, and engine speeds with both helium and hydrogen as the working fluid are summarized. An instrumentation system to determine indicated work is described and preliminary results are presented.

A cognitive robotics system: the symbolic and sub-symbolic robotic intelligence control system (SS-RICS)

NASA Astrophysics Data System (ADS)

Kelley, Troy D.; Avery, Eric

2010-04-01

This paper will detail the progress on the development of the Symbolic and Subsymbolic Robotics Intelligence Control System (SS-RICS). The system is a goal oriented production system, based loosely on the cognitive architecture, the Adaptive Control of Thought-Rational (ACT-R) some additions and changes. We have found that in order to simulate complex cognition on a robot, many aspects of cognition (long term memory (LTM), perception) needed to be in place before any generalized intelligent behavior can be produced. In working with ACT-R, we found that it was a good instantiation of working memory, but that we needed to add other aspects of cognition including LTM and perception to have a complete cognitive system. Our progress to date will be noted and the challenges that remain will be addressed.

Real-Time Event Detection for Monitoring Natural and Source ...

EPA Pesticide Factsheets

The use of event detection systems in finished drinking water systems is increasing in order to monitor water quality in both operational and security contexts. Recent incidents involving harmful algal blooms and chemical spills into watersheds have increased interest in monitoring source water quality prior to treatment. This work highlights the use of the CANARY event detection software in detecting suspected illicit events in an actively monitored watershed in South Carolina. CANARY is an open source event detection software that was developed by USEPA and Sandia National Laboratories. The software works with any type of sensor, utilizes multiple detection algorithms and approaches, and can incorporate operational information as needed. Monitoring has been underway for several years to detect events related to intentional or unintentional dumping of materials into the monitored watershed. This work evaluates the feasibility of using CANARY to enhance the detection of events in this watershed. This presentation will describe the real-time monitoring approach used in this watershed, the selection of CANARY configuration parameters that optimize detection for this watershed and monitoring application, and the performance of CANARY during the time frame analyzed. Further, this work will highlight how rainfall events impacted analysis, and the innovative application of CANARY taken in order to effectively detect the suspected illicit events. This presentation d

Motion Planning of Two Stacker Cranes in a Large-Scale Automated Storage/Retrieval System

NASA Astrophysics Data System (ADS)

Kung, Yiheng; Kobayashi, Yoshimasa; Higashi, Toshimitsu; Ota, Jun

We propose a method for reducing the computational time of motion planning for stacker cranes. Most automated storage/retrieval systems (AS/RSs) are only equipped with one stacker crane. However, this is logistically challenging, and greater work efficiency in warehouses, such as those using two stacker cranes, is required. In this paper, a warehouse with two stacker cranes working simultaneously is proposed. Unlike warehouses with only one crane, trajectory planning in those with two cranes is very difficult. Since there are two cranes working together, a proper trajectory must be considered to avoid collision. However, verifying collisions is complicated and requires a considerable amount of computational time. As transport work in AS/RSs occurs randomly, motion planning cannot be conducted in advance. Planning an appropriate trajectory within a restricted duration would be a difficult task. We thereby address the current problem of motion planning requiring extensive calculation time. As a solution, we propose a “free-step” to simplify the procedure of collision verification and reduce the computational time. On the other hand, we proposed a method to reschedule the order of collision verification in order to find an appropriate trajectory in less time. By the proposed method, we reduce the calculation time to less than 1/300 of that achieved in former research.

47 CFR 90.676 - Transition administrator for reconfiguration of the 806-824/851-869 MHz band in order to separate...

Code of Federal Regulations, 2010 CFR

2010-10-01

... their systems and ensuring that estimates contain a firm work schedule. The Transition Administrator... available to eligible applicants in the Public Safety or Critical Infrastructure Industry Categories as set...

ENERGY CONSERVATION AND PRODUCTION AT WASTE CLEANUP SITES (ISSUE PAPER)

EPA Science Inventory

Saving energy used by hazardous waste cleanup remediation systems should interest those people working on waste cleanup sites. Presidential Executive Order 13123, "Greening the Government Through Efficient Energy Management", states that each agency shall strive to expand the us...

On conservation laws for a generalized Boussinesq equation

NASA Astrophysics Data System (ADS)

Anco, S.; Rosa, M.; Gandarias, M. L.

2017-07-01

In this work, we study a Boussinesq equation with a strong damping term from the point of view of the Lie theory. By using the low order conservation laws we apply the conservation laws multiplier method to the associated potential systems.

Antisite defects in layered multiferroic CuCr0.9In0.1P2S6

NASA Astrophysics Data System (ADS)

He, Qian; Belianinov, Alex; Dziaugys, Andrius; Maksymovych, Petro; Vysochanskii, Yulian; Kalinin, Sergei V.; Borisevich, Albina Y.

2015-11-01

The CuCr1-xInxP2S6 system represents a large family of metal chalcogenophosphates that are unique and promising candidates for 2D materials with functionalities such as ferroelectricity. In this work, we carried out detailed microstructural and chemical characterization of these compounds using aberration-corrected STEM, in order to understand the origin of these different ordering phenomena. Quantitative STEM-HAADF imaging and analysis identified the stacking order of an 8-layer thin flake, which leads to the identification of anti-site In3+(Cu+) doping. We believe that these findings will pave the way towards understanding the ferroic coupling phenomena in van der Waals lamellar compounds, as well as their potential applications in 2-D electronics.The CuCr1-xInxP2S6 system represents a large family of metal chalcogenophosphates that are unique and promising candidates for 2D materials with functionalities such as ferroelectricity. In this work, we carried out detailed microstructural and chemical characterization of these compounds using aberration-corrected STEM, in order to understand the origin of these different ordering phenomena. Quantitative STEM-HAADF imaging and analysis identified the stacking order of an 8-layer thin flake, which leads to the identification of anti-site In3+(Cu+) doping. We believe that these findings will pave the way towards understanding the ferroic coupling phenomena in van der Waals lamellar compounds, as well as their potential applications in 2-D electronics. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr04779j

The research of computer network security and protection strategy

NASA Astrophysics Data System (ADS)

He, Jian

2017-05-01

With the widespread popularity of computer network applications, its security is also received a high degree of attention. Factors affecting the safety of network is complex, for to do a good job of network security is a systematic work, has the high challenge. For safety and reliability problems of computer network system, this paper combined with practical work experience, from the threat of network security, security technology, network some Suggestions and measures for the system design principle, in order to make the masses of users in computer networks to enhance safety awareness and master certain network security technology.

Lagrangian turbulence near walls: Structures and mixing in admissible model flows

NASA Astrophysics Data System (ADS)

Ottino, J. M.

1989-05-01

The general objective of work during this period was to bridge the gap between modern ideas from dynamical systems and chaos and more traditional approaches to turbulence. In order to reach this objective we conducted theoretical and computational work on two systems: a perturbed Kelvin cat eyes flow, and prototype solutions of the Navier-Stokes equations near solid walls. The main results obtained are two-fold: production flows capable of producing complex distributions of vorticity, and constructed flow fields, based on solutions of the Navier Stokes equations, which are capable of displaying both Eulerian and Lagrangian turbulence.

Kentucky Principal Perceptions of the State's New Teacher Evaluation System: A Survey Analysis

ERIC Educational Resources Information Center

Dodson, Richard L.

2015-01-01

This research examines how public school principals in Kentucky perceive their new teacher evaluation system and the proficiency exam they must take and pass in order to evaluate their staff. An online survey was developed and 308 out of an estimated 1,100 working school principals across Kentucky responded, yielding a response rate of 28%.…

Job Realities of Primary School Principals in Greece: Similarities and Variations in a Highly Centralized System

ERIC Educational Resources Information Center

Dimopoulos, Kostas; Dalkavouki, Katerina; Koulaidis, Vasilis

2015-01-01

This study aims at investigating primary school principals' work on a daily basis in order to understand the ways in which the centralized educational system affects their practices. Four typical cases of principals were selected and asked to keep daily records for a period of four months. Data from logs were complemented with data collected…

Developing a Deeper Understanding of "Mathematics Teaching Expertise": An Examination of Three Chinese Mathematics Teachers' Resource Systems as Windows into Their Work and Expertise

ERIC Educational Resources Information Center

Pepin, Birgit; Xu, Binyan; Trouche, Luc; Wang, Chongyang

2017-01-01

In order to develop a deeper understanding of mathematics teaching expertise, in this study we use the Documentational Approach to Didactics to explore the resource systems of three Chinese mathematics "expert" teachers. Exploiting the Western and Eastern literature we examine the notion of "mathematics teaching expertise", as…

[Professional psychological selection system in the Air Force - 50 years].

PubMed

Pokrovskiĭ, B L

2014-08-01

Given the data about the establishment of the professional psychological selection system in the Air Force in 1958-1964 in the NIIIAM Air Force by the team psychological department under the leadership of K.K.Platonova. Given the names of the developers of this system and given the results of their research. The result of all made work the order of Air Force Commander about the introduction of the psychological selection in Higher Military Aviation School of Pilots, starting from a set of 1964 became. Recommendations for professional psychological selection of a wide range of aviation professionals in various fields, and in the future - and other professionals of the Armed Forces, became the results of future work.

A macro-ergonomic work system analysis of the diagnostic testing process in an outpatient health care facility for process improvement and patient safety.

PubMed

Hallock, M L; Alper, S J; Karsh, B

The diagnosis of illness is important for quality patient care and patient safety and is greatly aided by diagnostic testing. For diagnostic tests, such as pathology and radiology, to positively impact patient care, the tests must be processed and the physician and patient must be notified of the results in a timely fashion. There are many steps in the diagnostic testing process, from ordering to result dissemination, where the process can break down and therefore delay patient care and reduce patient safety. This study was carried out to examine the diagnostic testing process (i.e. from ordering to result notification) and used a macro-ergonomic work system analysis to uncover system design flaws that contributed to delayed physician and patient notification of results. The study was carried out in a large urban outpatient health-care facility made up of 30 outpatient clinics. Results indicated a number of variances that contributed to delays, the majority of which occurred across the boundaries of different systems and were related to poor or absent feedback structures. Recommendations for improvements are discussed.

Android Platform for Realtime Gait Tracking Using Inertial Measurement Units.

PubMed

Aqueveque, Pablo; Sobarzo, Sergio; Saavedra, Francisco; Maldonado, Claudio; Gómez, Britam

2016-06-13

One of the most important movements performed by the humans is gait. Biomechanical Gait analysis is usually by optical capture systems. However, such systems are expensive and sensitive to light and obstacles. In order to reduce those costs a system based on Inertial Measurements Units (IMU) is proposed. IMU are a good option to make movement analisys indoor with a low post-processing data, allowing to connect those systems to an Android platform. The design is based on two elements: a) The IMU sensors and the b) Android device. The IMU sensor is simple, small (35 x 35 mm), portable and autonomous (7.8 hrs). A resolution of 0.01° in their measurements is obtained, and sends data via Bluetooth link. The Android application works for Android 4.2 or higher, and it is compatible with Bluetooth devices 2.0 or higher. Three IMU sensors send data to a Tablet wirelessly, in order to evaluate the angles evolution for each joint of the leg (hip, knee and ankle). This information is used to calculate gait index and evaluate the gait quality online during the physical therapist is working with the patient.

Scalable software architecture for on-line multi-camera video processing

NASA Astrophysics Data System (ADS)

Camplani, Massimo; Salgado, Luis

2011-03-01

In this paper we present a scalable software architecture for on-line multi-camera video processing, that guarantees a good trade off between computational power, scalability and flexibility. The software system is modular and its main blocks are the Processing Units (PUs), and the Central Unit. The Central Unit works as a supervisor of the running PUs and each PU manages the acquisition phase and the processing phase. Furthermore, an approach to easily parallelize the desired processing application has been presented. In this paper, as case study, we apply the proposed software architecture to a multi-camera system in order to efficiently manage multiple 2D object detection modules in a real-time scenario. System performance has been evaluated under different load conditions such as number of cameras and image sizes. The results show that the software architecture scales well with the number of camera and can easily works with different image formats respecting the real time constraints. Moreover, the parallelization approach can be used in order to speed up the processing tasks with a low level of overhead.

Does Management Really Matter? And If so, to Who?: Comment on "Management Matters: A Leverage Point for Health Systems Strengthening in Global Health".

PubMed

Dovlo, Delanyo

2015-12-03

The editorial is commendable and I agree with many of the points raised. Management is an important aspect of health system strengthening which is often overlooked. In order to build the capacity of management, we need to consider other factors such as, the environment within which managers work, their numbers, support systems and distribution. Effective leadership is an issue which cannot be overemphasized as part of management capacity in resource deprived settings as difficult settings require leadership skills in order to achieve managerial success. A primary issue of importance highlighted in the editorial is country ownership of management effectiveness initiatives, which may be very difficult when the health sector is dependent on support and funding from donors and influential partners, who drive change often without a good understanding of the context. How partners finance health programmes is another dilemma as it can distract from locally determined priorities. Further research should help us to understand better what works and under different settings. © 2016 by Kerman University of Medical Sciences.

Association effects in the {methanol + inert solvent} system via Monte Carlo simulations. II. Thermodynamics

NASA Astrophysics Data System (ADS)

Gómez-Álvarez, Paula; Romaní, Luis; González-Salgado, Diego

2013-05-01

Mixtures containing associated substances show a singular thermodynamic behaviour that has attracted to scientific community during the last century. Particularly, binary systems composed of an associating fluid and an inert solvent, where association occurs only between molecules of the same kind, have been extensively studied. A number of theoretical approaches were used in order to gain insights into the effect of the association on the macroscopic behaviour, especially on the second-order thermodynamic derivatives (or response functions). Curiously, to our knowledge, molecular simulations have not been used to that end despite describing the molecules and their interactions in a more complete and realistic way than theoretical models. With this in mind, a simple methodology developed in the framework of Monte Carlo molecular simulation is used in this work to quantify the association contribution to a wide set of thermodynamic properties for the {methanol + Lennard Jones} specific system under room conditions and throughout the composition range. Special attention was paid to the response functions and their respective excess properties, for which a detailed comparison with selected previous works in the field has been established.

Modeling the Hydrogen Solubility in Liquid Aluminum Alloys

NASA Astrophysics Data System (ADS)

Harvey, Jean-Philippe; Chartrand, Patrice

2010-08-01

The modeling of hydrogen solubility in multicomponent Al-(Li, Mg, Cu, and Si) liquid phase has been performed with a thermodynamic approach using the modified quasichemical model with the pair approximation (MQMPA). All hydrogen solubility data available in literature was assessed critically to obtain the binary parameters of the MQMPA model for the Al-H, Li-H, Mg-H, Cu-H, Zn-H, and Si-H melts. For the Li-H system, a new thermodynamic description of the stable solid lithium hydride was determined based on the c p found in literature. The thermodynamic model for the Al-Li system also was reassessed in this work to take into account the short-range ordering observed for this system. Built-in interpolation techniques allow the model to estimate the thermodynamic properties of the multicomponent liquid solution from the liquid model parameters of the lower order subsystems. A comparison of the calculated hydrogen solubility performed at various equilibrium conditions of temperature, pressure, and composition with the available experimental data found in the literature is presented in this work, as well as a comparison with some results from previous modeling.

Transport Studies of Quantum Magnetism: Physics and Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Minhyea

The main goal of this project was to understand novel ground states of spin systems probed by thermal and electrical transport measurements. They are well-suited to characterize the nature of low-energy excitations as unique property of the ground state. More specifically, it was aimed to study the transverse electrical conductivity in the presence of non-collinear and non-coplanar spin ordering and the effects of gauge field as well as novel spin excitations as a coherent heat transport channel in insulating quantum magnets. Most of works done during the grant period focused on these topics. As a natural extension of the project'smore » initial goals, the scope was broadened to include transport studies on the spin systems with strong spin-orbit coupling. One particular focus was an exploration of systems with strong magnetic anisotropy combined with non-trivial spin configuration. Magnetic anisotropy is directly related to implement the non-collinear spin ordering to the existing common geometry of planar devices and thus poses a significant potential. Work in this direction includes the comparison of the topological Hall signal under hydrostatic pressure and chemical doping, as well as the angular dependence dependence of the non-collinear spin ordered phase and their evolution up on temperature and field strength. Another focus was centered around the experimental identification of spin-originated heat carrying excitation in quasi two dimensional honeycomb lattice, where Kitaev type of quantum spin liquid phase is expected to emerge. In fact, when its long range magnetic order is destroyed by the applied field, we discovered anomalously large enhancement of thermal conductivity, for which proximate Kitaev excitations in field-induced spin liquid state are responsible for. This work, combined with further investigations in materials in the similar class may help establish the experimental characterization of new quantum spin liquid and their unique low energy excitation, e.g. Majorana fermions.« less

How Systems Engineering and Risk Management Defend Against Murphy's Law and Human Error

NASA Technical Reports Server (NTRS)

Bay, Michael; Connley, Warren

2004-01-01

Systems Engineering and Risk Management processes can work synergistically to defend against the causes of many mission ending failures. Defending against mission ending failures is facilitated by fostering a team that has a healthy respect for Murphy's Law and a team with a of curiosity for how things work, how they can fail, and what they need to know. This curiosity is channeled into making the unknowns known or what is uncertain more certain. Efforts to assure mission success require the expenditure of energy in the following areas: 1. Understanding what defines Mission Success as guided by the customer's needs, objectives and constraints. 2. Understanding how the system is supposed to work and how the system is to be produced, fueled by the curiosity of how the system should work and how it should be produced. 3. Understanding how the system can fail and how the system might not be produced on time and within cost, fueled by the curiosity of how the system might fail and how production might be difficult. 4. Understanding what we need to know and what we need learn for proper completion of the above three items, fueled by the curiosity of what we might not know in order to make the best decisions.

Weighted hybrid technique for recommender system

NASA Astrophysics Data System (ADS)

Suriati, S.; Dwiastuti, Meisyarah; Tulus, T.

2017-12-01

Recommender system becomes very popular and has important role in an information system or webpages nowadays. A recommender system tries to make a prediction of which item a user may like based on his activity on the system. There are some familiar techniques to build a recommender system, such as content-based filtering and collaborative filtering. Content-based filtering does not involve opinions from human to make the prediction, while collaborative filtering does, so collaborative filtering can predict more accurately. However, collaborative filtering cannot give prediction to items which have never been rated by any user. In order to cover the drawbacks of each approach with the advantages of other approach, both approaches can be combined with an approach known as hybrid technique. Hybrid technique used in this work is weighted technique in which the prediction score is combination linear of scores gained by techniques that are combined.The purpose of this work is to show how an approach of weighted hybrid technique combining content-based filtering and item-based collaborative filtering can work in a movie recommender system and to show the performance comparison when both approachare combined and when each approach works alone. There are three experiments done in this work, combining both techniques with different parameters. The result shows that the weighted hybrid technique that is done in this work does not really boost the performance up, but it helps to give prediction score for unrated movies that are impossible to be recommended by only using collaborative filtering.

Achieving Work-Life Balance in the National Collegiate Athletic Association Division I Setting, Part II: Perspectives From Head Athletic Trainers

PubMed Central

Goodman, Ashley; Mazerolle, Stephanie M.; Pitney, William A.

2015-01-01

Context: Work-life balance has been examined at the collegiate level from multiple perspectives except for the athletic trainer (AT) serving in a managerial or leadership role. Objective: To investigate challenges and strategies used in achieving work-life balance from the perspective of the head AT at a National Collegiate Athletic Association Division I university. Design: Qualitative study. Setting: Web-based management system. Patients or Other Participants: A total of 18 head ATs (13 men, 5 women; age = 44 ± 8 years, athletic training experience = 22 ± 7 years) volunteered. Data Collection and Analysis: Participants journaled their thoughts and experiences in response to a series of questions. To establish data credibility, we included multiple-analyst triangulation, stakeholder checks, and peer review. We used a general inductive approach to analyze the data. Results: Two higher-order themes emerged from our analysis of the data: organizational challenges and work-life balance strategies. The organizational challenges theme contained 2 lower-order themes: lack of autonomy and role demands. The work-life balance strategies theme contained 3 lower-order themes: prioritization of commitments, strategic boundary setting, and work-family integration. Conclusions: Head ATs are susceptible to experiencing work-life imbalance just as ATs in nonsupervisory roles are. Although not avoidable, the causes are manageable. Head ATs are encouraged to prioritize their personal time, make efforts to spend time away from their demanding positions, and reduce the number of additional responsibilities that can impede time available to spend away from work. PMID:25098746

Numerical method for the solution of large systems of differential equations of the boundary layer type

NASA Technical Reports Server (NTRS)

Green, M. J.; Nachtsheim, P. R.

1972-01-01

A numerical method for the solution of large systems of nonlinear differential equations of the boundary-layer type is described. The method is a modification of the technique for satisfying asymptotic boundary conditions. The present method employs inverse interpolation instead of the Newton method to adjust the initial conditions of the related initial-value problem. This eliminates the so-called perturbation equations. The elimination of the perturbation equations not only reduces the user's preliminary work in the application of the method, but also reduces the number of time-consuming initial-value problems to be numerically solved at each iteration. For further ease of application, the solution of the overdetermined system for the unknown initial conditions is obtained automatically by applying Golub's linear least-squares algorithm. The relative ease of application of the proposed numerical method increases directly as the order of the differential-equation system increases. Hence, the method is especially attractive for the solution of large-order systems. After the method is described, it is applied to a fifth-order problem from boundary-layer theory.

Assessing School Work Culture: A Higher-Order Analysis and Strategy.

ERIC Educational Resources Information Center

Johnson, William L.; Johnson, Annabel M.; Zimmerman, Kurt J.

This paper reviews a work culture productivity model and reports the development of a work culture instrument based on the culture productivity model. Higher order principal components analysis was used to assess work culture, and a third-order factor analysis shows how the first-order factors group into higher-order factors. The school work…

Design And Commissioning Status Of New Cylindrical HiPIMS Nb Coating System for SRF Cavities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, H. Lawrence; Macha, Kurt M.; Valente-Feliciano, Anne-Marie

2014-02-01

For the past 19 years Jefferson Lab has sustained a program studying niobium films deposited on small samples in order to develop an understanding of the correlation between deposition parameters, film micro-structure, and RF performance. A new cavity deposition system employing a cylindrical cathode using the HiPIMS technique has been developed to apply this work to cylindrical cavities. The status of this system will be presented.

Hybridizing a Geothermal Plant with Solar and Thermal Energy Storage to Enhance Power Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

McTigue, Joshua Dominic P; Zhu, Guangdong; Turchi, Craig S

The objective of this project is to identify cost-effective thermal storage systems for a geothermal/solar hybrid system in order to increase the plant dispatchability. Furthermore, an optimal quantity of thermal storage will also be determined to achieve the best economics of a geothermal/solar hybrid plant. NREL is working with Hyperlight Energy and Coso Operating Company to develop techno-economic models of such a system.

Cryogenics maintenance strategy

NASA Astrophysics Data System (ADS)

Cruzat, Fabiola

2012-09-01

ALMA is an interferometer composed of 66 independent systems, with specific maintenance requirements for each subsystem. To optimize the observation time and reduce downtime maintenance, requirements are very demanding. One subsystem with high maintenance efforts is cryogenics and vacuum. To organize the maintenance, the Cryogenic and Vacuum department is using and implementing different tools. These are monitoring and problem reporting systems and CMMS. This leads to different maintenance approaches: Preventive Maintenance, Corrective Maintenance and Condition Based Maintenance. In order to coordinate activities with other departments the preventive maintenance schedule is kept as flexible as systems allow. To cope with unavoidable failures, the team has to be prepared to work under any condition with the spares on time. Computerized maintenance management system (CMMS) will help to manage inventory control for reliable spare part handling, the correct record of work orders and traceability of maintenance activities. For an optimized approach the department is currently evaluating where preventive or condition based maintenance applies to comply with the individual system demand. Considering the change from maintenance contracts to in-house maintenance will help to minimize costs and increase availability of parts. Due to increased number of system and tasks the cryo team needs to grow. Training of all staff members is mandatory, in depth knowledge must be built up by doing complex maintenance activities in the Cryo group, use of advanced computerized metrology systems.

Development of Measurement Device of Working Radius of Crane Based on Single CCD Camera and Laser Range Finder

NASA Astrophysics Data System (ADS)

Nara, Shunsuke; Takahashi, Satoru

In this paper, what we want to do is to develop an observation device to measure the working radius of a crane truck. The device has a single CCD camera, a laser range finder and two AC servo motors. First, in order to measure the working radius, we need to consider algorithm of a crane hook recognition. Then, we attach the cross mark on the crane hook. Namely, instead of the crane hook, we try to recognize the cross mark. Further, for the observation device, we construct PI control system with an extended Kalman filter to track the moving cross mark. Through experiments, we show the usefulness of our device including new control system of mark tracking.

Ordering actions for visibility. [distributed computing based on idea of atomic actions operating on data

NASA Technical Reports Server (NTRS)

Mckendry, M. S.

1985-01-01

The notion of 'atomic actions' has been considered in recent work on data integrity and reliability. It has been found that the standard database operations of 'read' and 'write' carry with them severe performance limitations. For this reason, systems are now being designed in which actions operate on 'objects' through operations with more-or-less arbitrary semantics. An object (i.e., an instance of an abstract data type) comprises data, a set of operations (procedures) to manipulate the data, and a set of invariants. An 'action' is a unit of work. It appears to be primitive to its surrounding environment, and 'atomic' to other actions. Attention is given to the conventional model of nested actions, ordering requirements, the maximum possible visibility (full visibility) for items which must be controlled by ordering constraints, item management paradigms, and requirements for blocking mechanisms which provide the required visibility.

Impact of a radio frequency management information system on the process and timing of providing respiratory care services.

PubMed

Stoller, James K; Kester, Lucy; Orens, Douglas K; McCarthy, Kevin

2002-08-01

Although radio frequency (RF) systems have proliferated and are designed to simplify care delivery in many clinical settings, little information is available on the impact of such RF systems on the delivery of patient care. Having used a hand-held-device-based management information system in our Respiratory Therapy Section for 16 years, we assessed the impact of an RF system on the delivery of respiratory therapy (RT) services. A single nursing unit dedicated to pulmonary and ear, nose, and throat care was selected for the RF system trial. Baseline (pre-RF) data were collected over 2 separate 1-month intervals (February 1999 and February 2000). The main outcome measures were (1) the amount of time needed at the beginning of the shift to organize and assign orders for RT services, (2) the time interval between notification of an RT consult order and completion of the RT consult, and (3) the time interval between notification of an RT treatment order and completion of the RT treatment. The activities required for organizing and assigning the orders were manually timed. Starting 6 weeks after therapists were trained to use the RF system, similar data were collected while using the RF system for two 1-month intervals (February and March 2001). The mean +/- SD time interval between receiving an RT consult order and completing the consult was reduced from 7.8 +/- 18.9 h to 2.8 +/- 2.4 h (p = 0.002). The percentage of patients who waited longer than 8 hours between receipt of a consult order and completion of the consult decreased from 18% to 4.7% (p = 0.026). The total time required for organizing and assigning RT work was reduced from 81.6 min to 43.6 min. The RF system had several advantages over the hand-held-device-based system: (1) shorter interval between the order for and completion of an RT consult, (2) lower percentage of patients for whom the interval between the order and the consult exceeded 8 hours, and (3) less time required to make shift assignments. These results invite assessment of whether accelerated delivery of RT services confers clinical benefits.

Task planning and control synthesis for robotic manipulation in space applications

NASA Technical Reports Server (NTRS)

Sanderson, A. C.; Peshkin, M. A.; Homem-De-mello, L. S.

1987-01-01

Space-based robotic systems for diagnosis, repair and assembly of systems will require new techniques of planning and manipulation to accomplish these complex tasks. Results of work in assembly task representation, discrete task planning, and control synthesis which provide a design environment for flexible assembly systems in manufacturing applications, and which extend to planning of manipulatiuon operations in unstructured environments are summarized. Assembly planning is carried out using the AND/OR graph representation which encompasses all possible partial orders of operations and may be used to plan assembly sequences. Discrete task planning uses the configuration map which facilitates search over a space of discrete operations parameters in sequential operations in order to achieve required goals in the space of bounded configuration sets.

Influence of model order reduction methods on dynamical-optical simulations

NASA Astrophysics Data System (ADS)

Störkle, Johannes; Eberhard, Peter

2017-04-01

In this work, the influence of model order reduction (MOR) methods on optical aberrations is analyzed within a dynamical-optical simulation of a high precision optomechanical system. Therefore, an integrated modeling process and new methods have to be introduced for the computation and investigation of the overall dynamical-optical behavior. For instance, this optical system can be a telescope optic or a lithographic objective. In order to derive a simplified mechanical model for transient time simulations with low computational cost, the method of elastic multibody systems in combination with MOR methods can be used. For this, software tools and interfaces are defined and created. Furthermore, mechanical and optical simulation models are derived and implemented. With these, on the one hand, the mechanical sensitivity can be investigated for arbitrary external excitations and on the other hand, the related optical behavior can be predicted. In order to clarify these methods, academic examples are chosen and the influences of the MOR methods and simulation strategies are analyzed. Finally, the systems are investigated with respect to the mechanical-optical frequency responses, and in conclusion, some recommendations for the application of reduction methods are given.

Reuniting the Solar System: Integrated Education and Public Outreach Projects for Solar System Exploration Missions and Programs

NASA Technical Reports Server (NTRS)

Lowes, Leslie; Lindstrom, Marilyn; Stockman, Stephanie; Scalice, Daniela; Klug, Sheri

2003-01-01

The Solar System Exploration Education Forum has worked for five years to foster Education and Public Outreach (E/PO) cooperation among missions and programs in order to leverage resources and better meet the needs of educators and the public. These efforts are coming together in a number of programs and products and in '2004 - The Year of the Solar System.' NASA's practice of having independent E/PO programs for each mission and its public affairs emphasis on uniqueness has led to a public perception of a fragmented solar system exploration program. By working to integrate solar system E/PO, the breadth and depth of the solar system exploration program is revealed. When emphasis is put on what missions have in common, as well as their differences, each mission is seen in the context of the whole program.

Feasibility study of self-powered magnetorheological damper systems

NASA Astrophysics Data System (ADS)

Chen, Chao; Liao, Wei-Hsin

2012-04-01

This paper is aimed to provide a feasibility study of self-powered magnetorheological (MR) damper systems, which could convert vibration and shock energy into electrical energy to power itself under control. The self-powered feature could bring merits such as higher reliability, energy saving, and less maintenance for the MR damper systems. A self-powered MR damper system is proposed and modeled. The criterion whether the MR damper system is self-powered or not is proposed. A prototype of MR damper with power generation is designed, fabricated, and tested. The modeling of this damper is experimentally validated. Then the damper is applied to a 2 DOF suspension system under on-off skyhook controller, to obtain the self-powered working range and vibration control performance. Effects of key factors on the self-powered MR damper systems are studied. Design considerations are given in order to increase the self-powered working range.

Real time test bed development for power system operation, control and cyber security

NASA Astrophysics Data System (ADS)

Reddi, Ram Mohan

The operation and control of the power system in an efficient way is important in order to keep the system secure, reliable and economical. With advancements in smart grid, several new algorithms have been developed for improved operation and control. These algorithms need to be extensively tested and validated in real time before applying to the real electric power grid. This work focuses on the development of a real time test bed for testing and validating power system control algorithms, hardware devices and cyber security vulnerability. The test bed developed utilizes several hardware components including relays, phasor measurement units, phasor data concentrator, programmable logic controllers and several software tools. Current work also integrates historian for power system monitoring and data archiving. Finally, two different power system test cases are simulated to demonstrate the applications of developed test bed. The developed test bed can also be used for power system education.

Low-Order Aberrations in Band-limited Lyot Coronagraphs

NASA Astrophysics Data System (ADS)

Sivaramakrishnan, Anand; Soummer, Rémi; Sivaramakrishnan, Allic V.; Lloyd, James P.; Oppenheimer, Ben R.; Makidon, Russell B.

2005-12-01

We study the way Lyot coronagraphs with unapodized entrance pupils respond to small, low-order phase aberrations. This study is applicable to ground-based adaptive optics coronagraphs operating at 90% and higher Strehl ratios, as well as to some space-based coronagraphs with intrinsically higher Strehl ratio imaging. We utilize a second-order expansion of the monochromatic point-spread function (written as a power spectrum of a power series in the phase aberration over clear aperture) to derive analytical expressions for the response of a ``band-limited'' Lyot coronagraph (BLC) to small, low-order, phase aberrations. The BLC possesses a focal plane mask with an occulting spot whose opacity profile is a spatially band-limited function rather than a hard-edged, opaque disk. The BLC is, to first order, insensitive to tilt and astigmatism. Undersizing the stop in the reimaged pupil plane (the Lyot plane) following the focal plane mask can alleviate second-order effects of astigmatism, at the expense of system throughput and angular resolution. The optimal degree of such undersizing depends on individual instrument designs and goals. Our analytical work engenders physical insight and complements existing numerical work on this subject. Our methods can be extended to treat the passage of higher order aberrations through band-limited Lyot coronagraphs by using our polynomial decomposition or an analogous Fourier approach.

Managing Contention and Timing Constraints in a Real-Time Database System

DTIC Science & Technology

1995-01-01

In order to realize many of these goals, StarBase is constructed on top of RT-Mach, a real - time operating system developed at Carnegie Mellon...University [ll]. StarBase differs from previous RT-DBMS work [l, 2, 31 in that a) it relies on a real - time operating system which provides priority...CPU and resource scheduling pro- vided by tlhe underlying real - time operating system . Issues of data contention are dealt with by use of a priority

Post-marketing health technology monitoring. The analysis of an experience from a clinical perspective.

PubMed

Ibargoyen-Roteta, Nora; Cabriada-Nuño, Jose Luis; Gutiérrez-Ibarluzea, Iñaki; Hernández-Ramírez, Vicent; Clofent-Vilaplana, Juan; Domènech-Morral, Eugeni; Ginard-Vicens, Daniel; Oliva-Oliva, Gloria; Queiro-Verdes, Teresa

2011-01-01

A system for monitoring the use of aphaeresis in the treatment of ulcerative colitis (UC), named system for monitoring aphaeresis in ulcerative colitis (SiMAC), was designed in 2006 in the Basque Country. In the present study, the opinion of the clinicians who participated in SiMAC was evaluated, in order to identify the barriers and gather suggestions that could improve implementation of this kind of system. A mixed questionnaire was designed, in order to gather clinicians' assessments of the SiMAC monitoring system. The response rate was 73.9% (17/23). The data from 40.96% (159/388) of patients with UC treated with aphaeresis was recorded. The main reasons for not including the data from all treated patients were a lack of required data or not meeting the study inclusion criteria. Positive aspects of the SiMAC were identified, as the simplicity of data collection and its systematic, multi-center approach. The negative aspects mentioned were the use of a local computer application and the lack of time for health professionals to enter data. The use of monitoring systems helps to formalize the introduction of technologies of little-known effectiveness; involve clinicians and medical societies in coming to agreement and obtaining information about the safety, effectiveness or efficiency of new technologies; and provide relevant information to healthcare administrations for making decisions about the introduction of new technologies into healthcare practice. In order for a monitoring system to work, the process must be straightforward. A minimum set of key variables that are easy to collect must be selected, and an effort made to involve a range of stakeholders, especially institutions and scientific societies, to support the work group.

Diagnostic-management system and test pulse acquisition for WEST plasma measurement system

NASA Astrophysics Data System (ADS)

Wojenski, A.; Kasprowicz, G.; Pozniak, K. T.; Byszuk, A.; Juszczyk, B.; Zabolotny, W.; Zienkiewicz, P.; Chernyshova, M.; Czarski, T.; Mazon, D.; Malard, P.

2014-11-01

This paper describes current status of electronics, firmware and software development for new plasma measurement system for use in WEST facility. The system allows to perform two dimensional plasma visualization (in time) with spectrum measurement. The analog front-end is connected to Gas Electron Multiplier detector (GEM detector). The system architecture have high data throughput due to use of PCI-Express interface, Gigabit Transceivers and sampling frequency of ADC integrated circuits. The hardware is based on several years of experience in building X-ray spectrometer system for Joint European Torus (JET) facility. Data streaming is done using Artix7 FPGA devices. The system in basic configuration can work with up to 256 channels, while the maximum number of measurement channels is 2048. Advanced firmware for the FPGA is required in order to perform high speed data streaming and analog signal sampling. Diagnostic system management has been developed in order to configure measurement system, perform necessary calibration and prepare hardware for data acquisition.

WSN system design by using an innovative neural network model to perform thermals forecasting in a urban canyon scenario

NASA Astrophysics Data System (ADS)

Giuseppina, Nicolosi; Salvatore, Tirrito

2015-12-01

Wireless Sensor Networks (WSNs) were studied by researchers in order to manage Heating, Ventilating and Air-Conditioning (HVAC) indoor systems. WSN can be useful specially to regulate indoor confort in a urban canyon scenario, where the thermal parameters vary rapidly, influenced by outdoor climate changing. This paper shows an innovative neural network approach, by using WSN data collected, in order to forecast the indoor temperature to varying the outdoor conditions based on climate parameters and boundary conditions typically of urban canyon. In this work more attention will be done to influence of traffic jam and number of vehicles in queue.

New infrastructure for studies of transmutation and fast systems concepts

NASA Astrophysics Data System (ADS)

Panza, Fabio; Firpo, Gabriele; Lomonaco, Guglielmo; Osipenko, Mikhail; Ricco, Giovanni; Ripani, Marco; Saracco, Paolo; Viberti, Carlo Maria

2017-09-01

In this work we report initial studies on a low power Accelerator-Driven System as a possible experimental facility for the measurement of relevant integral nuclear quantities. In particular, we performed Monte Carlo simulations of minor actinides and fission products irradiation and estimated the fission rate within fission chambers in the reactor core and the reflector, in order to evaluate the transmutation rates and the measurement sensitivity. We also performed a photo-peak analysis of available experimental data from a research reactor, in order to estimate the expected sensitivity of this analysis method on the irradiation of samples in the ADS considered.

A low power ADS for transmutation studies in fast systems

NASA Astrophysics Data System (ADS)

Panza, Fabio; Firpo, Gabriele; Lomonaco, Guglielmo; Osipenko, Mikhail; Ricco, Giovanni; Ripani, Marco; Saracco, Paolo; Viberti, Carlo Maria

2017-12-01

In this work, we report studies on a fast low power accelerator driven system model as a possible experimental facility, focusing on its capabilities in terms of measurement of relevant integral nuclear quantities. In particular, we performed Monte Carlo simulations of minor actinides and fission products irradiation and estimated the fission rate within fission chambers in the reactor core and the reflector, in order to evaluate the transmutation rates and the measurement sensitivity. We also performed a photo-peak analysis of available experimental data from a research reactor, in order to estimate the expected sensitivity of this analysis method on the irradiation of samples in the ADS considered.

Interplay of symmetries and other integrability quantifiers in finite-dimensional integrable nonlinear dynamical systems

PubMed Central

Mohanasubha, R.; Chandrasekar, V. K.; Lakshmanan, M.

2016-01-01

In this work, we establish a connection between the extended Prelle–Singer procedure and other widely used analytical methods to identify integrable systems in the case of nth-order nonlinear ordinary differential equations (ODEs). By synthesizing these methods, we bring out the interlink between Lie point symmetries, contact symmetries, λ-symmetries, adjoint symmetries, null forms, Darboux polynomials, integrating factors, the Jacobi last multiplier and generalized λ-symmetries corresponding to the nth-order ODEs. We also prove these interlinks with suitable examples. By exploiting these interconnections, the characteristic quantities associated with different methods can be deduced without solving the associated determining equations. PMID:27436964

A procedure for radiometric recalibration of Landsat 5 TM reflective-band data

USGS Publications Warehouse

Chander, G.; Haque, M.O.; Micijevic, E.; Barsi, J.A.

2010-01-01

From the Landsat program's inception in 1972 to the present, the Earth science user community has been benefiting from a historical record of remotely sensed data. The multispectral data from the Landsat 5 (L5) Thematic Mapper (TM) sensor provide the backbone for this extensive archive. Historically, the radiometric calibration procedure for the L5 TM imagery used the detectors' response to the internal calibrator (IC) on a scene-by-scene basis to determine the gain and offset for each detector. The IC system degraded with time, causing radiometric calibration errors up to 20%. In May 2003, the L5 TM data processed and distributed by the U.S. Geological Survey (USGS) Earth Resources Observation and Science Center through the National Landsat Archive Production System (NLAPS) were updated to use a lifetime lookup-table (LUT) gain model to radiometrically calibrate TM data instead of using scene-specific IC gains. Further modification of the gain model was performed in 2007. The L5 TM data processed using IC prior to the calibration update do not benefit from the recent calibration revisions. A procedure has been developed to give users the ability to recalibrate their existing level-1 products. The best recalibration results are obtained if the work-order report that was included in the original standard data product delivery is available. However, if users do not have the original work-order report, the IC trends can be used for recalibration. The IC trends were generated using the radiometric gain trends recorded in the NLAPS database. This paper provides the details of the recalibration procedure for the following: 1) data processed using IC where users have the work-order file; 2) data processed using IC where users do not have the work-order file; 3) data processed using prelaunch calibration parameters; and 4) data processed using the previous version of the LUT (e.g., LUT03) that was released before April 2, 2007.

The WorkQueue project - a task queue for the CMS workload management system

NASA Astrophysics Data System (ADS)

Ryu, S.; Wakefield, S.

2012-12-01

We present the development and first experience of a new component (termed WorkQueue) in the CMS workload management system. This component provides a link between a global request system (Request Manager) and agents (WMAgents) which process requests at compute and storage resources (known as sites). These requests typically consist of creation or processing of a data sample (possibly terabytes in size). Unlike the standard concept of a task queue, the WorkQueue does not contain fully resolved work units (known typically as jobs in HEP). This would require the WorkQueue to run computationally heavy algorithms that are better suited to run in the WMAgents. Instead the request specifies an algorithm that the WorkQueue uses to split the request into reasonable size chunks (known as elements). An advantage of performing lazy evaluation of an element is that expanding datasets can be accommodated by having job details resolved as late as possible. The WorkQueue architecture consists of a global WorkQueue which obtains requests from the request system, expands them and forms an element ordering based on the request priority. Each WMAgent contains a local WorkQueue which buffers work close to the agent, this overcomes temporary unavailability of the global WorkQueue and reduces latency for an agent to begin processing. Elements are pulled from the global WorkQueue to the local WorkQueue and into the WMAgent based on the estimate of the amount of work within the element and the resources available to the agent. WorkQueue is based on CouchDB, a document oriented NoSQL database. The WorkQueue uses the features of CouchDB (map/reduce views and bi-directional replication between distributed instances) to provide a scalable distributed system for managing large queues of work. The project described here represents an improvement over the old approach to workload management in CMS which involved individual operators feeding requests into agents. This new approach allows for a system where individual WMAgents are transient and can be added or removed from the system as needed.

Computerizing Maintenance Management Improves School Processes.

ERIC Educational Resources Information Center

Conroy, Pat

2002-01-01

Describes how a Computerized Maintenance Management System (CMMS), a centralized maintenance operations database that facilitates work order procedures and staff directives, can help individual school campuses and school districts to manage maintenance. Presents the benefits of CMMS and things to consider in CMMS selection. (EV)

Characterization of permeability of pavement bases in Missouri Department of Transportation's System

DOT National Transportation Integrated Search

2003-02-01

The results of field (in-situ) and laboratory permeability testing showed MoDOT's predominant pavement base "Type 5" (and the upper "working" surface of the 2-foot rock fill alternative) has hydraulic conductivities that are several orders of magnitu...

78 FR 18629 - Notice of Lodging of Proposed Partial Consent Decree Under the Clean Water Act

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-27

... sewer system, perform initial work over the next four years to address sewer overflows, develop a..., DC 20044- 7611. Please enclose a check or money order for $84.50 (25 cents per page reproduction cost...

Emergent Topological order from Spin-Orbit Density wave

NASA Astrophysics Data System (ADS)

Gupta, Gaurav; Das, Tanmoy

We study the emergence of a Z2 -type topological order because of Landau type symmetry breaking order parameter. When two Rashba type SOC bands of different chirality become nested by a magic wavevector [(0, ∖pi) or (∖pi,0)], it introduces the inversion of chirality between different lattice sites. Such a density wave state is known as spin-orbit density wave. The resulting quantum order is associated with the topological order which is classified by a Z2 invariant. So, this system can simultaneously be classified by both a symmetry breaking order parameter and the associated Z2 topological invariant. This order parameter can be realized or engineered in two- or quasi-two-dimensional fermionic lattices, quantum wires, with tunable RSOC and correlation strength. The work is facilitated by the computer cluster facility at Department of Physics, Indian Institute of Science.

The effect of the electronic medical record on nurses' work.

PubMed

Robles, Jane

2009-01-01

The electronic medical record (EMR) is a workplace reality for most nurses. Its advantages include a single consolidated record for each person; capacity for data interfaces and alerts; improved interdisciplinary communication; and evidence-based decision support. EMRs can add to work complexity, by forcing better documentation of previously unrecorded data and/or because of poor design. Well-designed and well-implemented computerized provider order entry (CPOE) systems can streamline nurses' work. Generational differences in acceptance of and facility with EMRs can be addressed through open, healthy communication.

Do planets remember how they formed?

NASA Astrophysics Data System (ADS)

Kipping, David

2018-01-01

One of the most directly observable features of a transiting multiplanet system is their size-ordering when ranked in orbital separation. Kepler has revealed a rich diversity of outcomes, from perfectly ordered systems, like Kepler-80, to ostensibly disordered systems, like Kepler-20. Under the hypothesis that systems are born via preferred formation pathways, one might reasonably expect non-random size-orderings reflecting these processes. However, subsequent dynamical evolution, often chaotic and turbulent in nature, may erode this information and so here we ask - do systems remember how they formed? To address this, we devise a model to define the entropy of a planetary system's size-ordering, by first comparing differences between neighbouring planets and then extending to accommodate differences across the chain. We derive closed-form solutions for many of the microstate occupancies and provide public code with look-up tables to compute entropy for up to 10-planet systems. All three proposed entropy definitions exhibit the expected property that their credible interval increases with respect to a proxy for time. We find that the observed Kepler multis display a highly significant deficit in entropy compared to a randomly generated population. Incorporating a filter for systems deemed likely to be dynamically packed, we show that this result is robust against the possibility of missing planets too. Put together, our work establishes that Kepler systems do indeed remember something of their younger years and highlights the value of information theory for exoplanetary science.

Current neurosurgical trainees' perception of the European Working Time Directive and shift work.

PubMed

Tait, M J; Fellows, G A; Pushpananthan, S; Sergides, Y; Papadopoulos, M C; Bell, B A

2008-02-01

The introduction of the shift system in response to the European Working Time Directive has had an enormous impact on the running of neurosurgical units in the UK. This study seeks to establish what provisions are currently in place for out of hours cover and what has been the effect of the introduction of shifts in three main areas: patient safety, training and 'work/life balance'. The on-call registrar at each UK neurosurgical unit was contacted by telephone. Data regarding current emergency provision were sought. Registrars who had worked both on-calls and the shift system during their career as a neurosurgical registrar were asked to make a comparison. Data were collected from all 33 UK units. Twenty-two still use a traditional 24-h on-call system. Twenty-one on-call rotas were classed as non-resident although 12/21 of those officially on non-resident rotas were in fact resident whilst on call. Twenty-two registrars had worked both systems as a neurosurgical registrar. Twenty-one (95.45%) felt that traditional on-calls gave better clinical exposure. Twenty-one (95.45%) felt that on-calls allowed the provision of better patient care. Nineteen (86.36%) felt that on-calls were safer. Thirteen (59.09%) reported that they were more tired when doing shift work than on-calls. Fourteen (63.63%) found that the on-call system gives more useful spare time and more time to deal with family commitments. Current neurosurgery registrars feel the shift system is less safe, harmful to training and worse in terms of work/life balance. More than one-third of units are claiming to have non-resident on-call systems in order to appear compliant with EWTD when registrars are in fact resident.

Workplace System Factors of Obstetric Nurses in Northeastern Ontario, Canada: Using a Work Disability Prevention Approach.

PubMed

Nowrouzi, Behdin; Lightfoot, Nancy; Carter, Lorraine; Larivère, Michel; Rukholm, Ellen; Belanger-Gardner, Diane

2015-12-01

The purpose of this study was to examine the relationship nursing personal and workplace system factors (work disability) and work ability index scores in Ontario, Canada. A total of 111 registered nurses were randomly selected from the total number of registered nurses on staff in the labor, delivery, recovery, and postpartum areas of four northeastern Ontario hospitals. Using a stratified random design approach, 51 participants were randomly selected in four northeastern Ontario cities. A total of 51 (45.9% response rate) online questionnaires were returned and another 60 (54.1% response rate) were completed using the paper format. The obstetric workforce in northeastern Ontario was predominately female (94.6%) with a mean age of 41.9 (standard deviation = 10.2). In the personal systems model, three variables: marital status (p = 0.025), respondent ethnicity (p = 0.026), and mean number of patients per shift (p = 0.049) were significantly contributed to the variance in work ability scores. In the workplace system model, job and career satisfaction (p = 0.026) had a positive influence on work ability scores, while work absenteeism (p = 0.023) demonstrated an inverse relationship with work ability scores. In the combined model, all the predictors were significantly related to work ability scores. Work ability is closely related to job and career satisfaction, and perceived control at work among obstetric nursing. In order to improve work ability, nurses need to work in environments that support them and allow them to be engaged in the decision-making processes.

Application of graph theory to the statistical thermodynamics of lattice polymers. I. Elements of theory and test for dimers

NASA Astrophysics Data System (ADS)

Brazhnik, Olga D.; Freed, Karl F.

1996-07-01

The lattice cluster theory (LCT) is extended to enable inclusion of longer range correlation contributions to the partition function of lattice model polymers in the athermal limit. A diagrammatic technique represents the expansion of the partition function in powers of the inverse lattice coordination number. Graph theory is applied to sort, classify, and evaluate the numerous diagrams appearing in higher orders. New general theorems are proven that provide a significant reduction in the computational labor required to evaluate the contributions from higher order correlations. The new algorithm efficiently generates the correction to the Flory mean field approximation from as many as eight sterically interacting bonds. While the new results contain the essential ingredients for treating a system of flexible chains with arbitrary lengths and concentrations, the complexity of our new algorithm motivates us to test the theory here for the simplest case of a system of lattice dimers by comparison to the dimer packing entropies from the work of Gaunt. This comparison demonstrates that the eight bond LCT is exact through order φ5 for dimers in one through three dimensions, where φ is the volume fraction of dimers. A subsequent work will use the contracted diagrams, derived and tested here, to treat the packing entropy for a system of flexible N-mers at a volume fraction of φ on hypercubic lattices.

Effects of Second-Order Hydrodynamics on a Semisubmersible Floating Offshore Wind Turbine: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bayati, I.; Jonkman, J.; Robertson, A.

2014-07-01

The objective of this paper is to assess the second-order hydrodynamic effects on a semisubmersible floating offshore wind turbine. Second-order hydrodynamics induce loads and motions at the sum- and difference-frequencies of the incident waves. These effects have often been ignored in offshore wind analysis, under the assumption that they are significantly smaller than first-order effects. The sum- and difference-frequency loads can, however, excite eigenfrequencies of the system, leading to large oscillations that strain the mooring system or vibrations that cause fatigue damage to the structure. Observations of supposed second-order responses in wave-tank tests performed by the DeepCwind consortium at themore » MARIN offshore basin suggest that these effects might be more important than originally expected. These observations inspired interest in investigating how second-order excitation affects floating offshore wind turbines and whether second-order hydrodynamics should be included in offshore wind simulation tools like FAST in the future. In this work, the effects of second-order hydrodynamics on a floating semisubmersible offshore wind turbine are investigated. Because FAST is currently unable to account for second-order effects, a method to assess these effects was applied in which linearized properties of the floating wind system derived from FAST (including the 6x6 mass and stiffness matrices) are used by WAMIT to solve the first- and second-order hydrodynamics problems in the frequency domain. The method has been applied to the OC4-DeepCwind semisubmersible platform, supporting the NREL 5-MW baseline wind turbine. The loads and response of the system due to the second-order hydrodynamics are analysed and compared to first-order hydrodynamic loads and induced motions in the frequency domain. Further, the second-order loads and induced response data are compared to the loads and motions induced by aerodynamic loading as solved by FAST.« less

Impact of an automated dispensing system in outpatient pharmacies.

PubMed

Humphries, Tammy L; Delate, Thomas; Helling, Dennis K; Richardson, Bruce

2008-01-01

To evaluate the impact of an automated dispensing system (ADS) on pharmacy staff work activities and job satisfaction. Cross-sectional, retrospective study. Kaiser Permanente Colorado (KPCO) outpatient pharmacies in September 2005. Pharmacists and technicians from 18 outpatient pharmacies. All KPCO outpatient pharmacists (n = 136) and technicians (n = 160) were surveyed regarding demographics and work activities and pharmacist job satisfaction. Work activities and job satisfaction were compared between pharmacies with and without ADS. Historical prescription purchase records from ADS pharmacies were assessed for pre-ADS to post-ADS changes in productivity. Self-reported pharmacy staff work activities and pharmacist job satisfaction. Pharmacists who responded to the demographic questionnaire (n = 74) were primarily women (60%), had a bachelor's degree in pharmacy (68%), and had been in practice for 10 years or more (53%). Responding technicians (n = 72) were predominantly women (80%) with no postsecondary degree (90%) and fewer than 10 years (68%) in practice. Pharmacists in ADS pharmacies who responded to the work activities questionnaire (n = 50) reported equivalent mean hours spent in patient care activities and filling medication orders compared with non-ADS pharmacists (n = 33; P > 0.05). Similarly, technicians in ADS pharmacies who responded to the work activities questionnaire (n = 64) reported equivalent mean hours spent in filling medication orders compared with non-ADS technicians (n = 38; P > 0.05). An equivalent proportion of ADS pharmacists reported satisfaction with their current job compared with non-ADS pharmacies (P > 0.05). Mean productivity did not increase appreciably after automation (P >0.05). By itself, installing an ADS does not appear to shift pharmacist work activities from dispensing to patient counseling or to increase job satisfaction. Shifting pharmacist work activities from dispensing to counseling and monitoring drug therapy outcomes may be warranted in ADS pharmacies.

Using information technology to improve adult immunization delivery in an integrated urban health system.

PubMed

Swenson, Carolyn J; Appel, Alicia; Sheehan, Moira; Hammer, Anne; Fenner, Zita; Phibbs, Stephanie; Harbrecht, Marjie; Main, Deborah S

2012-01-01

Adult immunizations prevent morbidity and mortality yet coverage remains suboptimal, in part due to missed opportunities. Clinical decision support systems (CDSSs) can improve immunization rates when integrated into routine work flow, implemented wherever care is delivered, and used by staff who can act on the recommendation. An adult immunization improvement project was undertaken in a large integrated, safety-net health care system. A CDSS was developed to query patient records and identify patients eligible for pneumococcal, influenza, or tetanus immunization and then generate a statement that recommends immunization or indicates a previous refusal. A new agency policy authorized medical assistants and nurses in clinics, and nurses in the hospital, to use the CDSS as a standing order. Immunization delivery work flow was standardized, and staff received feedback on immunization rates. The CDSS identified more patients than a typical paper standing order and can be easily modified to incorporate changes in vaccine indications. The intervention led to a 10% improvement in immunization rates in adults 65 years of age or older and in younger adults with diabetes or chronic obstructive pulmonary disease. Overall, the improvements were sustained beyond the project period. The CDSS was expanded to encompass additional vaccines. Interdepartmental collaboration was critical to identify needs, challenges, and solutions. Implementing the standing order policy in clinics and the hospital usually allowed immunizations to be taken out of the hands of clinicians. As an on-demand tool, CDSS must be used at each patient encounter to avoid missed opportunities. Staff retraining accompanied by ongoing assessment of immunization rates, work flow, and missed opportunities to immunize patients are critical to sustain and enhance improvements.

Restoring the order: gender segregation as an obstacle to organisational development.

PubMed

Abrahamsson, Lena

2002-11-01

This paper raises questions about the links between gender and organisational changes. The empirical base for the discussion is a qualitative study of the effects of organisational changes in the pulp and paper industry, the electronics industry, the food industry and the laundry industry in Sweden during the mid-1990s. At the studied companies, restoration responses in the work organisations brought the organisation back into its original form and function. The study shows that gender exerts an influence both on the existing work organisation and in the organisational change. The modern organisation, with its focus on integration and decentralisation, challenges the gender order, which is a strong system, built on segregation and hierarchy. The conclusion from the study is that gender segregating and stereotypic gender-coding of workplaces and work tasks were strong restoring mechanisms and obstacles to strategic organisational changes.

Forward and inverse solutions for Risley prism based on the Denavit-Hartenberg methodology

NASA Astrophysics Data System (ADS)

Beltran-Gonzalez, A.; Garcia-Torales, G.; Strojnik, M.; Flores, J. L.; Garcia-Luna, J. L.

2017-08-01

In this work forward and inverse solutions for two-element Risley prism for pointing and scanning beam systems are developed. A more efficient and faster algorithm is proposed to make an analogy of the Risley prism system compared with a robotic system with two degrees of freedom. This system of equations controls each Risley prism individually as a planar manipulator arm of two links. In order to evaluate the algorithm we implement it in a pointing system. We perform popular routines such as the linear, spiral and loops traces. Using forward and inverse solutions for two-element Risley prism it is also possible to point at coordinates specified by the user, provided they are within the pointer area of work area. Experimental results are showed as a validation of our proposal.

Audio gunshot detection and localization systems: History, basic design, and future possibilities

NASA Astrophysics Data System (ADS)

Graves, Jordan R.

For decades, law enforcement organizations have increasingly utilized audio detection and localization systems to identify potential gunshot incidents and to respond accordingly. These systems have grown from simple microphone configurations used to estimate location into complex arrays that seem to pinpoint gunfire to within mere feet of its actual occurrence. Such technology comes from a long and dynamic history of developing equipment dating back to the First World War. Additionally, though basic designs require little in terms of programming or engineering experience, the mere presence of this tool invokes a firestorm of debate amongst economists, law enforcement groups, and the general public, which leads to questions about future possibilities for its use. The following pages will retell the history of these systems from theoretical conception to current capabilities. This work will also dissect these systems to reveal fundamental elements of their inner workings, in order to build a basic demonstrative system. Finally, this work will discuss some legal and moral points of dissension, and will explore these systems’ roles in society now and in the future, in additional applications as well.

Impact of data governance on a nation's healthcare system building blocks.

PubMed

Hovenga, Evelyn J S

2013-01-01

This chapter gives an overview of a nation's healthcare system, particularly for those who are familiar with IT but not healthcare or for those working in one area of healthcare who may not be familiar with the system and data requirements across the care continuum. The structure of this chapter uses the World Health Organisation's (WHO) Health systems framework with a focus on the need for data and information governance to achieve a sustainable health system delivering improved health for all, responsively and equitably meeting genuine demands for health services, with social and financial risk protection and overall improved efficiency. It is argued that there is a need to gather the right data and to process these data in a manner that provides good information in order to more fully understand how the health system is working and where and when it isn't working well. This needs to be achieved in the most cost effective manner that doesn't detract from the allocation of resources to healthcare or the clinical workflow required to achieve quality healthcare.

ESTA Exit Report

NASA Technical Reports Server (NTRS)

Lundebjerg, Kristen

2016-01-01

The Energy Test System's Area (ESTA) provides test capabilities and facilities to develop, evaluate or certify hardware in support of human spaceflight. The branch has a few different technical areas including pyrotechnics, batteries, electrical systems, power systems, propulsion and fluids. I will be mainly worked in the propulsion and fluids area. The tests/activities include testing the fluid and energy conversion systems that are required for the exploration and development of space. This group includes function and vibration tests, as well as thermal and vacuum tests. I was trained and certified as an ESTA test director in order to work on tests and sub tests with my mentor as well as the rest of the ESTA team. As a test director, I had the responsibility and authority for planning, developing, safety, execution and reporting on assigned test programs.

Research on copying system of dynamic multiplex holographic stereograms

NASA Astrophysics Data System (ADS)

Fu, Huaiping; Yang, Hong; Zheng, Tong

2003-05-01

The most important advantage of holographic stereograms over conventional hologram is that they can produce 3D images at any desired scale with movement, holographers in many countries involved in the studies towards it. We began our works in the early 80's and accomplished two research projects automatic system for making synthetic holograms and multiplex synthetic rainbow holograms, Based on these works, a large scale holographic stereogram of an animated goldfish was made by us for practical advertisement. In order to meet the needs of the market, a copying system for making multiplex holographic stereograms, and a special kind of silver halide holographic film developed by us recently. The characteristic of the copying system and the property of the special silver-halide emulsion are introduced in this paper.

I Feel You: The Design and Evaluation of a Domotic Affect-Sensitive Spoken Conversational Agent

PubMed Central

Lutfi, Syaheerah Lebai; Fernández-Martínez, Fernando; Lorenzo-Trueba, Jaime; Barra-Chicote, Roberto; Montero, Juan Manuel

2013-01-01

We describe the work on infusion of emotion into a limited-task autonomous spoken conversational agent situated in the domestic environment, using a need-inspired task-independent emotion model (NEMO). In order to demonstrate the generation of affect through the use of the model, we describe the work of integrating it with a natural-language mixed-initiative HiFi-control spoken conversational agent (SCA). NEMO and the host system communicate externally, removing the need for the Dialog Manager to be modified, as is done in most existing dialog systems, in order to be adaptive. The first part of the paper concerns the integration between NEMO and the host agent. The second part summarizes the work on automatic affect prediction, namely, frustration and contentment, from dialog features, a non-conventional source, in the attempt of moving towards a more user-centric approach. The final part reports the evaluation results obtained from a user study, in which both versions of the agent (non-adaptive and emotionally-adaptive) were compared. The results provide substantial evidences with respect to the benefits of adding emotion in a spoken conversational agent, especially in mitigating users' frustrations and, ultimately, improving their satisfaction. PMID:23945740

Using intranet-based order sets to standardize clinical care and prepare for computerized physician order entry.

PubMed

Heffner, John E; Brower, Kathleen; Ellis, Rosemary; Brown, Shirley

2004-07-01

The high cost of computerized physician order entry (CPOE) and physician resistance to standardized care have delayed implementation. An intranet-based order set system can provide some of CPOE's benefits and offer opportunities to acculturate physicians toward standardized care. INTRANET CLINICIAN ORDER FORMS (COF): The COF system at the Medical University of South Carolina (MUSC) allows caregivers to enter and print orders through the intranet at points of care and to access decision support resources. Work on COF began in March 2000 with transfer of 25 MUSC paper-based order set forms to an intranet site. Physician groups developed additional order sets, which number more than 200. Web traffic increased progressively during a 24-month period, peaking at more than 6,400 hits per month to COF. Decision support tools improved compliance with Centers for Medicare & Medicaid Services core indicators. Clinicians demonstrated a willingness to develop and use order sets and decision support tools posted on the COF site. COF provides a low-cost method for preparing caregivers and institutions to adopt CPOE and standardization of care. The educational resources, relevant links to external resources, and communication alerts will all link to CPOE, thereby providing a head start in CPOE implementation.

Consideration of liners and covers in performance assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phifer, Mark A.; Seitz, Robert R.; Suttora, Linda C.

2014-09-18

On-site disposal cells are in use and being considered at several United States Department of Energy (USDOE) sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These disposal cells are typically regulated by States and/or the U.S. Environmental Protection Agency under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) in addition to having to comply with requirements in DOE Order 435.1, Radioactive Waste Management due to the radioactive waste. The USDOE-Environmental Management Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnelmore » associated with these CERCLA disposal cells and work towards more consistent assumptions, as appropriate, for technical and policy considerations related to CERCLA risk assessments and DOE Order 435.1 performance assessments in support of a Record of Decision and Disposal Authorization Statement, respectively. One of the issues considered by the working group, which is addressed in this report, was how to appropriately consider the performance of covers and liners/leachate collections systems in the context of a DOE Order 435.1 performance assessment (PA). This same information may be appropriate for consideration within CERCLA risk assessments for these facilities. These OSDCs are generally developed to meet hazardous waste (HW) disposal design standards under the Resource Conservation and Recovery Act (RCRA) as well as the DOE Order 435.1 performance based standards for disposal of radioactive waste. To meet the standards for HW, the facilities typically include engineered covers and liner/leachate collection systems. Thus, when considering such facilities in the context of a DOE Order 435.1 PA, there is a need to address the evolution of performance of covers and liner/leachate collection systems in the context of meeting a performance standard considering time frames of 1,000 years for compliance and potentially thousands of years based on the wastes to test the robustness of the system. Experience has shown that there are a range of expectations and perspectives from the different regulators involved at different sites when reviewing assumptions related to cover and liner/leachate collection system performance. However for HW disposal alone under RCRA the design standards are typically considered sufficient by the regulators without a requirement to assess long-term performance thus avoiding the need to consider the details addressed in this report. This report provides suggestions for a general approach to address covers and liners/leachate collection systems in a DOE Order 435.1 PA and how to integrate assessments with defense-in-depth considerations such as design, operations, and waste acceptance criteria to address uncertainties. The emphasis is on water balances and management in such assessments. Specific information and references are provided for details needed to address the evolution of individual components of cover and liner/leachate collection systems. This information was then synthesized into suggestions for best practices for cover and liner system design and examples of approaches to address the performance of covers and liners as part of a performance assessment of the disposal system. Numerous references are provided for sources of information to help describe the basis for performance of individual components of cover and liner systems.« less

Visual Representations of Microcosm in Textbooks of Chemistry: Constructing a Systemic Network for Their Main Conceptual Framework

ERIC Educational Resources Information Center

Papageorgiou, George; Amariotakis, Vasilios; Spiliotopoulou, Vasiliki

2017-01-01

The main objective of this work is to analyse the visual representations (VRs) of the microcosm depicted in nine Greek secondary chemistry school textbooks of the last three decades in order to construct a systemic network for their main conceptual framework and to evaluate the contribution of each one of the resulting categories to the network.…

Advanced Control Systems for Aircraft Powerplants

DTIC Science & Technology

1980-02-01

production of high- integrity software. 1.0 INTRODUCTION Work on full-authority digital control for gas turbines was started at Rolls- Royce Limited... INTRODUCTION In order to fully understand the operation of the Secondary Power System Control Unit - abbreviated SPSCU - we must first take a close look at...Only Memory EPROM -- Erasable Read Only Memory PLA -- Power Lever Angle LVDT -- Linear Variable Differential Transformer INTRODUCTION Preliminary design

Human Resource Systems (HRS) in Rehabilitation: A Catalyst for Performance and Change. Institute on Rehabilitation Issues (18th, Memphis, Tennessee, October 1991).

ERIC Educational Resources Information Center

Corthell, David W., Ed.

The purpose of this book is to aid vocational rehabilitation professionals in maximizing human resource capacities. It is intended to help build a delivery system based on needed skills and attitudes among its work force, through integration of various human resource components. The book proposes that in order for rehabilitation agencies to…

Promoting Higher Order Thinking Skills via IPTEACES e-Learning Framework in the Learning of Information Systems Units

ERIC Educational Resources Information Center

Isaias, Pedro; Issa, Tomayess; Pena, Nuno

2014-01-01

When developing and working with various types of devices from a supercomputer to an iPod Mini, it is essential to consider the issues of Human Computer Interaction (HCI) and Usability. Developers and designers must incorporate HCI, Usability and user satisfaction in their design plans to ensure that systems are easy to learn, effective,…

Teaching Folder Management System for the Enhancement of Engineering and Built Environment Faculty Program

ERIC Educational Resources Information Center

Ab-Rahman, Mohammad Syuhaimi; Mustaffa, Muhamad Azrin Mohd; Abdul, Nasrul Amir; Yusoff, Abdul Rahman Mohd; Hipni, Afiq

2015-01-01

A strong, systematic and well-executed management system will be able to minimize and coordinate workload. A number of committees need to be developed, which are joined by the department staffs to achieve the objectives that have been set. Another important aspect is the monitoring department in order to ensure that the work done is correct and in…

Invariant classification of second-order conformally flat superintegrable systems

NASA Astrophysics Data System (ADS)

Capel, J. J.; Kress, J. M.

2014-12-01

In this paper we continue the work of Kalnins et al in classifying all second-order conformally-superintegrable (Laplace-type) systems over conformally flat spaces, using tools from algebraic geometry and classical invariant theory. The results obtained show, through Stäckel equivalence, that the list of known nondegenerate superintegrable systems over three-dimensional conformally flat spaces is complete. In particular, a seven-dimensional manifold is determined such that each point corresponds to a conformal class of superintegrable systems. This manifold is foliated by the nonlinear action of the conformal group in three dimensions. Two systems lie in the same conformal class if and only if they lie in the same leaf of the foliation. This foliation is explicitly described using algebraic varieties formed from representations of the conformal group. The proof of these results rely heavily on Gröbner basis calculations using the computer algebra software packages Maple and Singular.

Relativistic Positioning Systems and Gravitational Perturbations

NASA Astrophysics Data System (ADS)

Gomboc, Andreja; Kostić, Uroš; Horvat, Martin; Carloni, Sante; Delva, Pacôme

2013-11-01

In order to deliver a high accuracy relativistic positioning system, several gravitational perturbations need to be taken into account. We therefore consider a system of satellites, such as the Galileo system, in a space-time described by a background Schwarzschild metric and small gravitational perturbations due to the Earth’s rotation, multipoles and tides, and the gravity of the Moon, the Sun, and planets. We present the status of this work currently carried out in the ESA Slovenian PECS project Relativistic Global Navigation System, give the explicit expressions for the perturbed metric, and briefly outline further steps.

The Management and Security Expert (MASE)

NASA Technical Reports Server (NTRS)

Miller, Mark D.; Barr, Stanley J.; Gryphon, Coranth D.; Keegan, Jeff; Kniker, Catherine A.; Krolak, Patrick D.

1991-01-01

The Management and Security Expert (MASE) is a distributed expert system that monitors the operating systems and applications of a network. It is capable of gleaning the information provided by the different operating systems in order to optimize hardware and software performance; recognize potential hardware and/or software failure, and either repair the problem before it becomes an emergency, or notify the systems manager of the problem; and monitor applications and known security holes for indications of an intruder or virus. MASE can eradicate much of the guess work of system management.

Flexible endoscopes: structure and function: the endoscopic retrograde cholangiopancreatography elevator system.

PubMed

Holland, Pat; Shoop, Nancy M

2002-01-01

Flexible endoscopes are complex medical instruments that are easily damaged. In order to maintain the flexible endoscope in optimum working condition, the user must have a thorough understanding of the structure and function of the instrument. This is the fourth in a series of articles presenting an in-depth look at the care and handling of the flexible endoscope. The first three articles discussed the air-water system, the suction channel system, and the mechanical system. This article will focus specifically on the endoscopic retrograde cholangiopancreatography elevator system.

Gradient nonlinearity calibration and correction for a compact, asymmetric magnetic resonance imaging gradient system

PubMed Central

Tao, S; Trzasko, J D; Gunter, J L; Weavers, P T; Shu, Y; Huston, J; Lee, S K; Tan, E T; Bernstein, M A

2017-01-01

Due to engineering limitations, the spatial encoding gradient fields in conventional magnetic resonance imaging cannot be perfectly linear and always contain higher-order, nonlinear components. If ignored during image reconstruction, gradient nonlinearity (GNL) manifests as image geometric distortion. Given an estimate of the GNL field, this distortion can be corrected to a degree proportional to the accuracy of the field estimate. The GNL of a gradient system is typically characterized using a spherical harmonic polynomial model with model coefficients obtained from electromagnetic simulation. Conventional whole-body gradient systems are symmetric in design; typically, only odd-order terms up to the 5th-order are required for GNL modeling. Recently, a high-performance, asymmetric gradient system was developed, which exhibits more complex GNL that requires higher-order terms including both odd- and even-orders for accurate modeling. This work characterizes the GNL of this system using an iterative calibration method and a fiducial phantom used in ADNI (Alzheimer’s Disease Neuroimaging Initiative). The phantom was scanned at different locations inside the 26-cm diameter-spherical-volume of this gradient, and the positions of fiducials in the phantom were estimated. An iterative calibration procedure was utilized to identify the model coefficients that minimize the mean-squared-error between the true fiducial positions and the positions estimated from images corrected using these coefficients. To examine the effect of higher-order and even-order terms, this calibration was performed using spherical harmonic polynomial of different orders up to the 10th-order including even- and odd-order terms, or odd-order only. The results showed that the model coefficients of this gradient can be successfully estimated. The residual root-mean-squared-error after correction using up to the 10th-order coefficients was reduced to 0.36 mm, yielding spatial accuracy comparable to conventional whole-body gradients. The even-order terms were necessary for accurate GNL modeling. In addition, the calibrated coefficients improved image geometric accuracy compared with the simulation-based coefficients. PMID:28033119

Assured Human-Autonomy Interaction through Machine Self-Confidence

NASA Astrophysics Data System (ADS)

Aitken, Matthew

Autonomous systems employ many layers of approximations in order to operate in increasingly uncertain and unstructured environments. The complexity of these systems makes it hard for a user to understand the systems capabilities, especially if the user is not an expert. However, if autonomous systems are to be used efficiently, their users must trust them appropriately. This purpose of this work is to implement and assess an 'assurance' that an autonomous system can provide to the user to elicit appropriate trust. Specifically, the autonomous system's perception of its own capabilities is reported to the user as the self-confidence assurance. The self-confidence assurance should allow the user to more quickly and accurately assess the autonomous system's capabilities, generating appropriate trust in the autonomous system. First, this research defines self-confidence and discusses what the self-confidence assurance is attempting to communicate to the user. Then it provides a framework for computing the autonomous system's self-confidence as a function of self-confidence factors which correspond to individual elements in the autonomous system's process. In order to explore this idea, self-confidence is implemented on an autonomous system that uses a mixed observability Markov decision process model to solve a pursuit-evasion problem on a road network. The implementation of a factor assessing the goodness of the autonomy's expected performance is focused on in particular. This work highlights some of the issues and considerations in the design of appropriate metrics for the self-confidence factors, and provides the basis for future research for computing self-confidence in autonomous systems.

Dynamic Modeling and Simulation of a Rotational Inverted Pendulum

NASA Astrophysics Data System (ADS)

Duart, J. L.; Montero, B.; Ospina, P. A.; González, E.

2017-01-01

This paper presents an alternative way to the dynamic modeling of a rotational inverted pendulum using the classic mechanics known as Euler-Lagrange allows to find motion equations that describe our model. It also has a design of the basic model of the system in SolidWorks software, which based on the material and dimensions of the model provides some physical variables necessary for modeling. In order to verify the theoretical results, It was made a contrast between the solutions obtained by simulation SimMechanics-Matlab and the system of equations Euler-Lagrange, solved through ODE23tb method included in Matlab bookstores for solving equations systems of the type and order obtained. This article comprises a pendulum trajectory analysis by a phase space diagram that allows the identification of stable and unstable regions of the system.

Model based design of electronic throttle control

NASA Astrophysics Data System (ADS)

Cherian, Fenin; Ranjan, Ashish; Bhowmick, Pathikrit; Rammohan, A.

2017-11-01

With the advent of torque based Engine Management Systems, the precise control and robust performance of the throttle body becomes a key factor in the overall performance of the vehicle. Electronic Throttle Control provides benefits such as improved air-fuel ratio for improving the vehicle performance and lower exhausts emissions to meet the stringent emission norms. Modern vehicles facilitate various features such as Cruise Control, Traction Control, Electronic Stability Program and Pre-crash systems. These systems require control over engine power without driver intervention, which is not possible with conventional mechanical throttle system. Thus these systems are integrated to function with the electronic throttle control. However, due to inherent non-linearities in the throttle body, the control becomes a difficult task. In order to eliminate the influence of this hysteresis at the initial operation of the butterfly valve, a control to compensate the shortage must be added to the duty required for starting throttle operation when the initial operation is detected. Therefore, a lot of work is being done in this field to incorporate the various nonlinearities to achieve robust control. In our present work, the ETB was tested to verify the working of the system. Calibration of the TPS sensors was carried out in order to acquire accurate throttle opening angle. The response of the calibrated system was then plotted against a step input signal. A linear model of the ETB was prepared using Simulink and its response was compared with the experimental data to find out the initial deviation of the model from the actual system. To reduce this deviation, non-linearities from existing literature were introduced to the system and a response analysis was performed to check the deviation from the actual system. Based on this investigation, an introduction of a new nonlinearity parameter can be used in future to reduce the deviation further making the control of the ETB more precise and accurate.

Higher order explicit symmetric integrators for inseparable forms of coordinates and momenta

NASA Astrophysics Data System (ADS)

Liu, Lei; Wu, Xin; Huang, Guoqing; Liu, Fuyao

2016-06-01

Pihajoki proposed the extended phase-space second-order explicit symmetric leapfrog methods for inseparable Hamiltonian systems. On the basis of this work, we survey a critical problem on how to mix the variables in the extended phase space. Numerical tests show that sequent permutations of coordinates and momenta can make the leapfrog-like methods yield the most accurate results and the optimal long-term stabilized error behaviour. We also present a novel method to construct many fourth-order extended phase-space explicit symmetric integration schemes. Each scheme represents the symmetric production of six usual second-order leapfrogs without any permutations. This construction consists of four segments: the permuted coordinates, triple product of the usual second-order leapfrog without permutations, the permuted momenta and the triple product of the usual second-order leapfrog without permutations. Similarly, extended phase-space sixth, eighth and other higher order explicit symmetric algorithms are available. We used several inseparable Hamiltonian examples, such as the post-Newtonian approach of non-spinning compact binaries, to show that one of the proposed fourth-order methods is more efficient than the existing methods; examples include the fourth-order explicit symplectic integrators of Chin and the fourth-order explicit and implicit mixed symplectic integrators of Zhong et al. Given a moderate choice for the related mixing and projection maps, the extended phase-space explicit symplectic-like methods are well suited for various inseparable Hamiltonian problems. Samples of these problems involve the algorithmic regularization of gravitational systems with velocity-dependent perturbations in the Solar system and post-Newtonian Hamiltonian formulations of spinning compact objects.

Detailed requirements document for the Interactive Financial Management System (IFMS), volume 1

NASA Technical Reports Server (NTRS)

Dodson, D. B.

1975-01-01

The detailed requirements for phase 1 (online fund control, subauthorization accounting, and accounts receivable functional capabilities) of the Interactive Financial Management System (IFMS) are described. This includes information on the following: systems requirements, performance requirements, test requirements, and production implementation. Most of the work is centered on systems requirements, and includes discussions on the following processes: resources authority, allotment, primary work authorization, reimbursable order acceptance, purchase request, obligation, cost accrual, cost distribution, disbursement, subauthorization performance, travel, accounts receivable, payroll, property, edit table maintenance, end-of-year, backup input. Other subjects covered include: external systems interfaces, general inquiries, general report requirements, communication requirements, and miscellaneous. Subjects covered under performance requirements include: response time, processing volumes, system reliability, and accuracy. Under test requirements come test data sources, general test approach, and acceptance criteria. Under production implementation come data base establishment, operational stages, and operational requirements.

New Developments in Wildfire Pollution Forecasting at the Canadian Meteorological Centre

NASA Astrophysics Data System (ADS)

Pavlovic, Radenko; Chen, Jack; Munoz-Alpizar, Rodrigo; Davignon, Didier; Beaulieu, Paul-Andre; Landry, Hugo; Menard, Sylvain; Gravel, Sylvie; Moran, Michael

2017-04-01

Environment and Climate Change Canada's air quality forecast system with near-real-time wildfire emissions, named FireWork, was developed in 2012 and has been run by the Canadian Meteorological Centre Operations division (CMCO) since 2013. In June 2016 this system was upgraded to operational status and wildfire smoke forecasts for North America are now available to the general public. FireWork's ability to model the transport and diffusion of wildfire smoke plumes has proved to be valuable to regional air quality forecasters and emergency first responders. Some of the most challenging issues with wildfire pollution modelling concern the production of wildfire emission estimates and near-source dispersion within the air quality model. As a consequence, FireWork is undergoing constant development. During the massive Fort McMurray wildfire event in western Canada in May 2016, for example, different wildfire emissions processing approaches and wildfire emissions injection and dispersion schemes were tested within the air quality model. Work on various FireWork components will continue in order to deliver a new operational version of the forecasting system for the 2017 wildfire season. Some of the proposed improvements will be shown in this presentation along with current and planned FireWork post-processing products.

The Eyes Have It.

ERIC Educational Resources Information Center

Walsh, Janet

1982-01-01

Discusses the health hazards of working with the visual display systems of computers, in particular the eye problems associated with long-term use of video display terminals. Excerpts from and ordering information for the National Institute for Occupational Safety and Health report on such hazards are included. (JJD)

Vegetable soybean tolerance to pyroxasulfone

USDA-ARS?s Scientific Manuscript database

If registered for use on vegetable soybean, pyroxasulfone would fill an important gap in weed management systems in the crop. In order to determine the potential crop injury risk of pyroxasulfone on vegetable soybean, the objective of this work was to quantify vegetable soybean tolerance to pyroxasu...

External and Turbomachinery Flow Control Working Group

NASA Technical Reports Server (NTRS)

Ahmadi, G.; Alstrom, B.; Colonius, T.; Dannenhoffer, J.; Glauser, M.; Helenbrook, B.; Higuchi, H.; Hodson, H.; Jha, R.; Kabiri, P.;

A Multi-Axial Scheme for Assessment and Intervention.

ERIC Educational Resources Information Center

Kirkland, John; Morgan, Griffith

1984-01-01

Describes a scheme consisting of nine elements or "themes" ordered in terms of their more probable links developed from clinical work with crying infants. Theme categories are genetic/hereditary, psychiatric disorder, central nervous system, medical health (chronic), medical health (acute), nutrition/allergy, form, psychosocial…

A Look at Children in China.

ERIC Educational Resources Information Center

Cohen, Dorothy H.; And Others

This paper explores educational philosophy and its effect on children's development in the People's Republic of China. The Chinese educational system incorporates heterogeneous classrooms and opportunities to "serve the people" through meaningful, productive work in order to foster a perception of group membership among students. The…

49 CFR 800.4 - Operation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Operation. In exercising its functions, duties, and responsibilities, the Board utilizes: (a) The Board's... performing administrative and technical work for the Board. The staff advises the Board and performs duties... directives system is designated as the NTSB Manual and consists of instructions which are called NTSB Orders...

Teleeducation and telepathology for open and distance education.

PubMed

Szymas, J

2000-01-01

Our experience in creating and using telepathology system and multimedia database for education is described. This program packet currently works in the Department of Pathology of University Medical School in Poznan. It is used for self-education, tests, services and for the examinations in pathology, i.e., for dental students and for medical students in terms of self-education and individual examination services. The system is implemented on microcomputers compatible with IBM PC and works in the network system Netware 5.1. Some modules are available through the Internet. The program packet described here accomplishes the TELEMIC system for telepathology, ASSISTANT, which is the administrator for the databases, and EXAMINATOR, which is the executive program. The realization of multi-user module allows students to work on several working areas, on random be chosen different sets of problems contemporary. The possibility to work in the exercise mode will image files and questions is an attractive way for self-education. The standard format of the notation files enables to elaborate the results by commercial statistic packets in order to estimate the scale of answers and to find correlation between the obtained results. The method of multi-criterion grading excludes unlimited mutual compensation of the criteria, differentiates the importance of particular courses and introduces the quality criteria. The packet is part of the integrated management information system of the department of pathology. Applications for other telepathological systems are presented.

Simulations of non-relativistic quantum chromodynamics at strong and weak coupling

NASA Astrophysics Data System (ADS)

Shakespeare, Norman Harold

In this thesis heavy quarks are investigated using lattice nonrelativistic quantum chromodynamics (NRQCD). Two major research works are presented. In the first major work, simulations are done for the three quarkonium systems cc¯, bc¯, and bb¯. The hyperfine splittings are computed at both leading and next-to-leading order in the relativistic expansion, using a large number of lattice spacings. A detailed comparison between mean-link and average plaquette tadpole renormalization schemes is undertaken with a number of features favouring the use of mean-links. These include much better scaling behavior of the hyperfine splittings and smaller relativistic corrections to the spin splittings. Signs of a breakdown in the NRQCD expansion are seen when the bare quark mass, in lattice units, falls below about one. In the second work, coefficients for the perturbative expansion of the static quark self energy are extracted from Monte Carlo simulations in the perturbative region of lattice quantum chromodynamics (QCD). A very large systematic study resulted in a major extension of existing methods. Twisted boundary conditions are used to eliminate the effects of zero modes and to suppress tunneling between the degenerate Z3 vacua. The Monte Carlo results are in excellent agreement with analytic perturbation theory, which is known through second order. New results for the third order coefficient are reported. Preliminary work is reported on quark propagators which will be used to measure second order mass renormalizations for NRQCD fermions.

Transport properties of initially neutral gas disturbed by intense electron beam

NASA Astrophysics Data System (ADS)

Angus, Justin; Swanekamp, Steve; Schumer, Joseph; Mosher, Dave; Ottinger, Paul

2013-10-01

The behavior of intense electron beams (those with current densities on the order of hundreds of kA/cm2 and beam rise times on the order of 100 ns) traveling through gaseous mediums depends strongly on the transport properties of the medium. For example, the conductivity of the medium, which is very sensitive to the ionization state and temperature of the gas, has a strong influence on the beam behavior through the plasma return current. Since the beam is responsible for ionizing and heating the gas, self-consistently solving for the gas transport properties and the beam propagation is essential for an accurate description of the system. An advanced gas chemistry model to describe the transport properties of a strongly disturbed gaseous system is presented in this work. A focal point of this work is an accurate description of the medium's conductivity as the gas progresses from its weakly ionized state, where swarm models are valid, to a strongly ionized state where the Spitzer-Harm model applies. NRL Karle Fellowship

Launch Control Network Engineer

NASA Technical Reports Server (NTRS)

Medeiros, Samantha

2017-01-01

The Spaceport Command and Control System (SCCS) is being built at the Kennedy Space Center in order to successfully launch NASA’s revolutionary vehicle that allows humans to explore further into space than ever before. During my internship, I worked with the Network, Firewall, and Hardware teams that are all contributing to the huge SCCS network project effort. I learned the SCCS network design and the several concepts that are running in the background. I also updated and designed documentation for physical networks that are part of SCCS. This includes being able to assist and build physical installations as well as configurations. I worked with the network design for vehicle telemetry interfaces to the Launch Control System (LCS); this allows the interface to interact with other systems at other NASA locations. This network design includes the Space Launch System (SLS), Interim Cryogenic Propulsion Stage (ICPS), and the Orion Multipurpose Crew Vehicle (MPCV). I worked on the network design and implementation in the Customer Avionics Interface Development and Analysis (CAIDA) lab.

Patient source of learning about health technologies and ratings of trust in technologies used in their care

PubMed Central

Montague, Enid

2011-01-01

In order to design effective health technologies and systems, it is important to understand how patients learn and make decisions about health technologies used in their care. The objective of this study was to examine patients' source of learning about technologies used in their care and how the source related to their trust in the technology used. Individual face-to-face and telephone interviews were conducted with 24 patients. Thirteen unique sources of information about technology were identified and three major themes emerged; outside of the work system versus inside the work system, when the health information was provided, and the medium used. Patients used multiple sources outside of the health care work system to learn about technologies that will be used in their care. Results showed a relationship between learning about technologies from web sources and trust in technologies but no relationship between learning about technologies from health care providers and trust in technologies. PMID:20967654

Exergetic analysis of a thermo-generator for automotive application: A dynamic numerical approach

NASA Astrophysics Data System (ADS)

Glavatskaya, O.; Goupil, C.; Bakkali, A. El; Shonda, O.

2012-06-01

It is well known that, when using a passenger car with an ICE (Internal Combustion Engine), only a fraction of the burnt fuel energy actually contributes to drive the vehicle. Typical passenger vehicle engines run about 25% efficiency while a great part of the remaining energy (about 40%), is lost through the exhaust gases. This latter has a significant energy conversion potential since the temperature (more than 300°C) and the mass flow rate are high enough. Thus, direct conversion of heat into electricity is a credible option if the overall system is optimized. This point is crucial since the heat conversion into work process is very sensible to any mismatching of the different parts of the system, and very sensible significant to the possible varying working conditions. All these effects constitute irreversibility sources that degrade the overall efficiency. The exergetic analysis is known to be an efficient tool for finding the root causes of theses irreversible processes. In order to investigate the performance of our automotive thermo-generator we propose an analysis of the exergy flow through the system under dynamic conditions. Taking into account the different irreversible sources such as thermal conduction and Joule effect, we are able to localize and quantify the exergy losses. Then, in order to optimize the thermoelectric converter for a given vehicle, correct actions in term of design and working conditions can be proposed.

On the MAF solution of the uniformly lengthening pendulum via change of independent variable in the Bessel's equation

NASA Astrophysics Data System (ADS)

Deniz, Coşkun

Common recipe for the Lengthening Pendulum (LP) involves some change of variables to give a relationship with the Bessel's equation. In this work, semiclassical MAF (Modified Airy Function) solution of the LP is being obtained by first transforming the related Bessel's equation into the normal form via the suggested change of independent variable just as one of our recent work regarding the JWKB solution of the LP in (Deniz, 2017). MAF approximation of the first order Bessel Functions (ν = 1) of both type along with their zeros are being obtained analytically with a very good accuracy as a result of the appropriately chosen associated initial values and they are extended to the neighbouring orders (ν = 0 and 2) by the recursion relations. Although common numerical methods given in the literature require adiabatic LP systems where the lengthening rate is small, MAF solution presented here can safely be used for higher lengthening rates and a criterion for its validity is determined via the use of MAF applicability criterion given in the literature. As a result, the semiclassical MAF method which is normally used for the quantum mechanical and optical waveguide systems is applied to the classical LP system successfully just as our previous work regarding the JWKB solution of the LP. Interestingly, we have very accurate results in the entire domain except for x ≈ 0 .

Fully anharmonic IR and Raman spectra of medium-size molecular systems: accuracy and interpretation†

PubMed Central

Barone, Vincenzo; Biczysko, Malgorzata; Bloino, Julien

2015-01-01

Computation of full infrared (IR) and Raman spectra (including absolute intensities and transition energies) for medium- and large-sized molecular systems beyond the harmonic approximation is one of the most interesting challenges of contemporary computational chemistry. Contrary to common beliefs, low-order perturbation theory is able to deliver results of high accuracy (actually often better than those issuing from current direct dynamics approaches) provided that anharmonic resonances are properly managed. This perspective sketches the recent developments in our research group toward the development a robust and user-friendly virtual spectrometer rooted into the second-order vibrational perturbation theory (VPT2) and usable also by non-specialists essentially as a black-box procedure. Several examples are explicitly worked out in order to illustrate the features of our computational tool together with the most important ongoing developments. PMID:24346191

Efficient parallelization of analytic bond-order potentials for large-scale atomistic simulations

NASA Astrophysics Data System (ADS)

Teijeiro, C.; Hammerschmidt, T.; Drautz, R.; Sutmann, G.

2016-07-01

Analytic bond-order potentials (BOPs) provide a way to compute atomistic properties with controllable accuracy. For large-scale computations of heterogeneous compounds at the atomistic level, both the computational efficiency and memory demand of BOP implementations have to be optimized. Since the evaluation of BOPs is a local operation within a finite environment, the parallelization concepts known from short-range interacting particle simulations can be applied to improve the performance of these simulations. In this work, several efficient parallelization methods for BOPs that use three-dimensional domain decomposition schemes are described. The schemes are implemented into the bond-order potential code BOPfox, and their performance is measured in a series of benchmarks. Systems of up to several millions of atoms are simulated on a high performance computing system, and parallel scaling is demonstrated for up to thousands of processors.

Small Engine Technology (SET) - Task 13 ANOPP Noise Prediction for Small Engines: Jet Noise Prediction Module, Wing Shielding Module, and System Studies Results

NASA Technical Reports Server (NTRS)

Lieber, Lysbeth; Golub, Robert (Technical Monitor)

2000-01-01

This Final Report has been prepared by AlliedSignal Engines and Systems, Phoenix, Arizona, documenting work performed during the period May 1997 through June 1999, under the Small Engines Technology Program, Contract No. NAS3-27483, Task Order 13, ANOPP Noise Prediction for Small Engines. The report specifically covers the work performed under Subtasks 4, 5 and 6. Subtask 4 describes the application of a semi-empirical procedure for jet noise prediction, subtask 5 describes the development of a procedure to predict the effects of wing shielding, and subtask 6 describes the results of system studies of the benefits of the new noise technology on business and regional aircraft.

Spatial attention interacts with serial-order retrieval from verbal working memory.

PubMed

van Dijck, Jean-Philippe; Abrahamse, Elger L; Majerus, Steve; Fias, Wim

2013-09-01

The ability to maintain the serial order of events is recognized as a major function of working memory. Although general models of working memory postulate a close link between working memory and attention, such a link has so far not been proposed specifically for serial-order working memory. The present study provided the first empirical demonstration of a direct link between serial order in verbal working memory and spatial selective attention. We show that the retrieval of later items of a sequence stored in working memory-compared with that of earlier items-produces covert attentional shifts toward the right. This observation suggests the conceptually surprising notion that serial-order working memory, even for nonspatially defined verbal items, draws on spatial attention.

Quantum work fluctuations in connection with the Jarzynski equality.

PubMed

Jaramillo, Juan D; Deng, Jiawen; Gong, Jiangbin

2017-10-01

A result of great theoretical and experimental interest, the Jarzynski equality predicts a free energy change ΔF of a system at inverse temperature β from an ensemble average of nonequilibrium exponential work, i.e., 〈e^{-βW}〉=e^{-βΔF}. The number of experimental work values needed to reach a given accuracy of ΔF is determined by the variance of e^{-βW}, denoted var(e^{-βW}). We discover in this work that var(e^{-βW}) in both harmonic and anharmonic Hamiltonian systems can systematically diverge in nonadiabatic work protocols, even when the adiabatic protocols do not suffer from such divergence. This divergence may be regarded as a type of dynamically induced phase transition in work fluctuations. For a quantum harmonic oscillator with time-dependent trapping frequency as a working example, any nonadiabatic work protocol is found to yield a diverging var(e^{-βW}) at sufficiently low temperatures, markedly different from the classical behavior. The divergence of var(e^{-βW}) indicates the too-far-from-equilibrium nature of a nonadiabatic work protocol and makes it compulsory to apply designed control fields to suppress the quantum work fluctuations in order to test the Jarzynski equality.

Towards a definition of life.

PubMed

Macklem, Peter T; Seely, Andrew

2010-01-01

This article offers a new definition of life as a "self-contained, self-regulating, self-organizing, self-reproducing, interconnected, open thermodynamic network of component parts which performs work, existing in a complex regime which combines stability and adaptability in the phase transition between order and chaos, as a plant, animal, fungus, or microbe." Open thermodynamic networks, which create and maintain order and are used by all organisms to perform work, import energy from and export entropy into the environment. Intra- and extracellular interconnected networks also confer order. Although life obeys the laws of physics and chemistry, the design of living organisms is not determined by these laws, but by Darwinian selection of the fittest designs. Over a short range of normalized energy consumption, open thermodynamic systems change from deeply ordered to chaotic, and life is found in this phase transition, where a dynamic balance between stability and adaptability allows for homeokinesis. Organisms and cells move within the phase transition with changes in metabolic rate. Seeds, spores and cryo-preserved tissue are well within the ordered regime, while health probably cannot be maintained with displacements into the chaotic regime. Understanding life in these terms may provide new insights into what constitutes health and lead to new theories of disease.

Maximising information recovery from rank-order codes

NASA Astrophysics Data System (ADS)

Sen, B.; Furber, S.

2007-04-01

The central nervous system encodes information in sequences of asynchronously generated voltage spikes, but the precise details of this encoding are not well understood. Thorpe proposed rank-order codes as an explanation of the observed speed of information processing in the human visual system. The work described in this paper is inspired by the performance of SpikeNET, a biologically inspired neural architecture using rank-order codes for information processing, and is based on the retinal model developed by VanRullen and Thorpe. This model mimics retinal information processing by passing an input image through a bank of Difference of Gaussian (DoG) filters and then encoding the resulting coefficients in rank-order. To test the effectiveness of this encoding in capturing the information content of an image, the rank-order representation is decoded to reconstruct an image that can be compared with the original. The reconstruction uses a look-up table to infer the filter coefficients from their rank in the encoded image. Since the DoG filters are approximately orthogonal functions, they are treated as their own inverses in the reconstruction process. We obtained a quantitative measure of the perceptually important information retained in the reconstructed image relative to the original using a slightly modified version of an objective metric proposed by Petrovic. It is observed that around 75% of the perceptually important information is retained in the reconstruction. In the present work we reconstruct the input using a pseudo-inverse of the DoG filter-bank with the aim of improving the reconstruction and thereby extracting more information from the rank-order encoded stimulus. We observe that there is an increase of 10 - 15% in the information retrieved from a reconstructed stimulus as a result of inverting the filter-bank.

Characterization of the mechanical properties of resected porcine organ tissue using optical fiber photoelastic polarimetry.

PubMed

Hudnut, Alexa W; Babaei, Behzad; Liu, Sonya; Larson, Brent K; Mumenthaler, Shannon M; Armani, Andrea M

2017-10-01

Characterizing the mechanical behavior of living tissue presents an interesting challenge because the elasticity varies by eight orders of magnitude, from 50Pa to 5GPa. In the present work, a non-destructive optical fiber photoelastic polarimetry system is used to analyze the mechanical properties of resected samples from porcine liver, kidney, and pancreas. Using a quasi-linear viscoelastic fit, the elastic modulus values of the different organ systems are determined. They are in agreement with previous work. In addition, a histological assessment of compressed and uncompressed tissues confirms that the tissue is not damaged during testing.

A detailed description of the implementation of inpatient insulin orders with a commercial electronic health record system.

PubMed

Neinstein, Aaron; MacMaster, Heidemarie Windham; Sullivan, Mary M; Rushakoff, Robert

2014-07-01

In the setting of Meaningful Use laws and professional society guidelines, hospitals are rapidly implementing electronic glycemic management order sets. There are a number of best practices established in the literature for glycemic management protocols and programs. We believe that this is the first published account of the detailed steps to be taken to design, implement, and optimize glycemic management protocols in a commercial computerized provider order entry (CPOE) system. Prior to CPOE implementation, our hospital already had a mature glycemic management program. To transition to CPOE, we underwent the following 4 steps: (1) preparation and requirements gathering, (2) design and build, (3) implementation and dissemination, and (4) optimization. These steps required more than 2 years of coordinated work between physicians, nurses, pharmacists, and programmers. With the move to CPOE, our complex glycemic management order sets were successfully implemented without any significant interruptions in care. With feedback from users, we have continued to refine the order sets, and this remains an ongoing process. Successful implementation of glycemic management protocols in CPOE is dependent on broad stakeholder input and buy-in. When using a commercial CPOE system, there may be limitations of the system, necessitating workarounds. There should be an upfront plan to apply resources for continuous process improvement and optimization after implementation. © 2014 Diabetes Technology Society.

Measurement of Carbon Dioxide Column via Space Borne Laser Absorption

NASA Technical Reports Server (NTRS)

Heaps, WIlliam S.

2007-01-01

In order to better understand the budget of carbon dioxide in the Earth's atmosphere it is necessary to develop a global high precision understanding of the carbon dioxide column. In order to uncover the 'missing sink that is responsible for the large discrepancies in the budget as we presently understand it calculation has indicated that measurement accuracy on the order of 1 ppm is necessary. Because typical column average CO2 has now reached 380 ppm this represents a precision on the order of .25% for these column measurements. No species has ever been measured from space at such a precision. In recognition of the importance of understanding the CO2 budget in order to evaluate its impact on global warming the National Research Council in its decadal survey report to NASA recommended planning for a laser based total CO2 mapping mission in the near future. The extreme measurement accuracy requirements on this mission places very strong requirements on the laser system used for the measurement. This work presents an analysis of the characteristics necessary in a laser system used to make this measurement. Consideration is given to the temperature dependence, pressure broadening, and pressure shift of the CO2 lines themselves and how these impact the laser system characteristics Several systems for meeting these requirements that are under investigation at various institutions in the US as well as Europe will be discussed.

A bio-inspired system for spatio-temporal recognition in static and video imagery

NASA Astrophysics Data System (ADS)

Khosla, Deepak; Moore, Christopher K.; Chelian, Suhas

2007-04-01

This paper presents a bio-inspired method for spatio-temporal recognition in static and video imagery. It builds upon and extends our previous work on a bio-inspired Visual Attention and object Recognition System (VARS). The VARS approach locates and recognizes objects in a single frame. This work presents two extensions of VARS. The first extension is a Scene Recognition Engine (SCE) that learns to recognize spatial relationships between objects that compose a particular scene category in static imagery. This could be used for recognizing the category of a scene, e.g., office vs. kitchen scene. The second extension is the Event Recognition Engine (ERE) that recognizes spatio-temporal sequences or events in sequences. This extension uses a working memory model to recognize events and behaviors in video imagery by maintaining and recognizing ordered spatio-temporal sequences. The working memory model is based on an ARTSTORE1 neural network that combines an ART-based neural network with a cascade of sustained temporal order recurrent (STORE)1 neural networks. A series of Default ARTMAP classifiers ascribes event labels to these sequences. Our preliminary studies have shown that this extension is robust to variations in an object's motion profile. We evaluated the performance of the SCE and ERE on real datasets. The SCE module was tested on a visual scene classification task using the LabelMe2 dataset. The ERE was tested on real world video footage of vehicles and pedestrians in a street scene. Our system is able to recognize the events in this footage involving vehicles and pedestrians.

Multi-pole orders and Kondo screening: Implications for quantum phase transitions in multipolar heavy-fermion systems

NASA Astrophysics Data System (ADS)

Lai, Hsin-Hua; Nica, Emilian; Si, Qimiao

Motivated by the properties of the heavy-fermion Ce3Pd20Si6 compound which exhibits both antiferro-magnetic (AFM) and antiferro-quadrupolar (AFQ) orders, we study a simplified quantum non-linear sigma model for spin-1 systems, with generalized multi-pole Kondo couplings to conduction electrons. We first consider the case when an SU(3) symmetry relates the spin and quadrupolar channels. We then analyze the effect of breaking the SU(3) symmetry, so that the interaction parameters in the spin and quadrupolar sectors are no longer equivalent, and different stages of Kondo screenings are allowed. A renormalization group analysis is used to analyze the interplay between the Kondo effect and the AFM/AFQ orders. Our work paves the way for understanding the global phase diagram in settings beyond the prototypical spin-1/2 cases. We also discuss similar considerations in the non-Kramers systems such as the heavy fermion compound PrV2Al20

A survey on signals and systems in ambulatory blood pressure monitoring using pulse transit time.

PubMed

Buxi, Dilpreet; Redouté, Jean-Michel; Yuce, Mehmet Rasit

2015-03-01

Blood pressure monitoring based on pulse transit or arrival time has been the focus of much research in order to design ambulatory blood pressure monitors. The accuracy of these monitors is limited by several challenges, such as acquisition and processing of physiological signals as well as changes in vascular tone and the pre-ejection period. In this work, a literature survey covering recent developments is presented in order to identify gaps in the literature. The findings of the literature are classified according to three aspects. These are the calibration of pulse transit/arrival times to blood pressure, acquisition and processing of physiological signals and finally, the design of fully integrated blood pressure measurement systems. Alternative technologies as well as locations for the measurement of the pulse wave signal should be investigated in order to improve the accuracy during calibration. Furthermore, the integration and validation of monitoring systems needs to be improved in current ambulatory blood pressure monitors.

Mediterranea Forecasting System: a focus on wave-current coupling

NASA Astrophysics Data System (ADS)

Clementi, Emanuela; Delrosso, Damiano; Pistoia, Jenny; Drudi, Massimiliano; Fratianni, Claudia; Grandi, Alessandro; Pinardi, Nadia; Oddo, Paolo; Tonani, Marina

2016-04-01

The Mediterranean Forecasting System (MFS) is a numerical ocean prediction system that produces analyses, reanalyses and short term forecasts for the entire Mediterranean Sea and its Atlantic Ocean adjacent areas. MFS became operational in the late 90's and has been developed and continuously improved in the framework of a series of EU and National funded programs and is now part of the Copernicus Marine Service. The MFS is composed by the hydrodynamic model NEMO (Nucleus for European Modelling of the Ocean) 2-way coupled with the third generation wave model WW3 (WaveWatchIII) implemented in the Mediterranean Sea with 1/16 horizontal resolution and forced by ECMWF atmospheric fields. The model solutions are corrected by the data assimilation system (3D variational scheme adapted to the oceanic assimilation problem) with a daily assimilation cycle, using a background error correlation matrix varying seasonally and in different sub-regions of the Mediterranean Sea. The focus of this work is to present the latest modelling system upgrades and the related achieved improvements. In order to evaluate the performance of the coupled system a set of experiments has been built by coupling the wave and circulation models that hourly exchange the following fields: the sea surface currents and air-sea temperature difference are transferred from NEMO model to WW3 model modifying respectively the mean momentum transfer of waves and the wind speed stability parameter; while the neutral drag coefficient computed by WW3 model is passed to NEMO that computes the turbulent component. In order to validate the modelling system, numerical results have been compared with in-situ and remote sensing data. This work suggests that a coupled model might be capable of a better description of wave-current interactions, in particular feedback from the ocean to the waves might assess an improvement on the prediction capability of wave characteristics, while suggests to proceed toward a fully coupled modelling system in order to achieve stronger enhancements of the hydrodynamic fields.

PlanWorks: A Debugging Environment for Constraint Based Planning Systems

NASA Technical Reports Server (NTRS)

Daley, Patrick; Frank, Jeremy; Iatauro, Michael; McGann, Conor; Taylor, Will

2005-01-01

Numerous planning and scheduling systems employ underlying constraint reasoning systems. Debugging such systems involves the search for errors in model rules, constraint reasoning algorithms, search heuristics, and the problem instance (initial state and goals). In order to effectively find such problems, users must see why each state or action is in a plan by tracking causal chains back to part of the initial problem instance. They must be able to visualize complex relationships among many different entities and distinguish between those entities easily. For example, a variable can be in the scope of several constraints, as well as part of a state or activity in a plan; the activity can arise as a consequence of another activity and a model rule. Finally, they must be able to track each logical inference made during planning. We have developed PlanWorks, a comprehensive system for debugging constraint-based planning and scheduling systems. PlanWorks assumes a strong transaction model of the entire planning process, including adding and removing parts of the constraint network, variable assignment, and constraint propagation. A planner logs all transactions to a relational database that is tailored to support queries for of specialized views to display different forms of data (e.g. constraints, activities, resources, and causal links). PlanWorks was specifically developed for the Extensible Universal Remote Operations Planning Architecture (EUROPA(sub 2)) developed at NASA, but the underlying principles behind PlanWorks make it useful for many constraint-based planning systems. The paper is organized as follows. We first describe some fundamentals of EUROPA(sub 2). We then describe PlanWorks' principal components. We then discuss each component in detail, and then describe inter-component navigation features. We close with a discussion of how PlanWorks is used to find model flaws.

Mutual information as an order parameter for quantum synchronization

NASA Astrophysics Data System (ADS)

Ameri, V.; Eghbali-Arani, M.; Mari, A.; Farace, A.; Kheirandish, F.; Giovannetti, V.; Fazio, R.

2015-01-01

Spontaneous synchronization is a fundamental phenomenon, important in many theoretical studies and applications. Recently, this effect has been analyzed and observed in a number of physical systems close to the quantum-mechanical regime. In this work we propose mutual information as a useful order parameter which can capture the emergence of synchronization in very different contexts, ranging from semiclassical to intrinsically quantum-mechanical systems. Specifically, we first study the synchronization of two coupled Van der Pol oscillators in both classical and quantum regimes and later we consider the synchronization of two qubits inside two coupled optical cavities. In all these contexts, we find that mutual information can be used as an appropriate figure of merit for determining the synchronization phases independently of the specific details of the system.

Performance Parameters Analysis of an XD3P Peugeot Engine Using Artificial Neural Networks (ANN) Concept in MATLAB

NASA Astrophysics Data System (ADS)

Rangaswamy, T.; Vidhyashankar, S.; Madhusudan, M.; Bharath Shekar, H. R.

2015-04-01

The current trends of engineering follow the basic rule of innovation in mechanical engineering aspects. For the engineers to be efficient, problem solving aspects need to be viewed in a multidimensional perspective. One such methodology implemented is the fusion of technologies from other disciplines in order to solve the problems. This paper mainly deals with the application of Neural Networks in order to analyze the performance parameters of an XD3P Peugeot engine (used in Ministry of Defence). The basic propaganda of the work is divided into two main working stages. In the former stage, experimentation of an IC engine is carried out in order to obtain the primary data. In the latter stage the primary database formed is used to design and implement a predictive neural network in order to analyze the output parameters variation with respect to each other. A mathematical governing equation for the neural network is obtained. The obtained polynomial equation describes the characteristic behavior of the built neural network system. Finally, a comparative study of the results is carried out.

Making Educational Spaces through Boundary Work: Territorialisation and "Boundarying"

ERIC Educational Resources Information Center

Seddon, Terri

2014-01-01

Globalising processes are shifting the established nation-building project of twentieth-century national education systems. This historic axis between education and territorialised state power is being re-spatialised and remade as a globally networked, lifelong learning educational order. Political sociology of education theorises these de- and…

7 CFR 1724.32 - Inspection and certification of work order construction.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND... construction. The provisions of this section apply to all borrower electric system facilities regardless of the... performed within 6 months of the completion of construction, and are performed by a licensed engineer...

7 CFR 1724.32 - Inspection and certification of work order construction.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND... construction. The provisions of this section apply to all borrower electric system facilities regardless of the... performed within 6 months of the completion of construction, and are performed by a licensed engineer...

48 CFR 4.705-3 - Acquisition and supply records.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Acquisition and supply... GENERAL ADMINISTRATIVE MATTERS Contractor Records Retention 4.705-3 Acquisition and supply records. (a) Store requisitions for materials, supplies, equipment, and services: Retain 2 years. (b) Work orders for...

Multiple Award, Multiple Order Contracts - The Future of Navy Surface Maintenance Procurement

DTIC Science & Technology

2015-06-01

example, in October 2004, Australia’s North West Shelf Shipping signed a long-term maintenance and upgrade contract for its fleet of liquefied natural ...fuel tank during shipyard corrosion control activities (e.g., grinding and/or sanding) and there was already a work item in the contract for crack...is not related to items in the original contract. An example of new work is adding fuel tank repair to a combat systems equipment-specific

A control system based on field programmable gate array for papermaking sewage treatment

NASA Astrophysics Data System (ADS)

Zhang, Zi Sheng; Xie, Chang; Qing Xiong, Yan; Liu, Zhi Qiang; Li, Qing

2013-03-01

A sewage treatment control system is designed to improve the efficiency of papermaking wastewater treatment system. The automation control system is based on Field Programmable Gate Array (FPGA), coded with Very-High-Speed Integrate Circuit Hardware Description Language (VHDL), compiled and simulated with Quartus. In order to ensure the stability of the data used in FPGA, the data is collected through temperature sensors, water level sensor and online PH measurement system. The automatic control system is more sensitive, and both the treatment efficiency and processing power are increased. This work provides a new method for sewage treatment control.

Full-order optimal compensators for flow control: the multiple inputs case

NASA Astrophysics Data System (ADS)

Semeraro, Onofrio; Pralits, Jan O.

2018-03-01

Flow control has been the subject of numerous experimental and theoretical works. We analyze full-order, optimal controllers for large dynamical systems in the presence of multiple actuators and sensors. The full-order controllers do not require any preliminary model reduction or low-order approximation: this feature allows us to assess the optimal performance of an actuated flow without relying on any estimation process or further hypothesis on the disturbances. We start from the original technique proposed by Bewley et al. (Meccanica 51(12):2997-3014, 2016. https://doi.org/10.1007/s11012-016-0547-3), the adjoint of the direct-adjoint (ADA) algorithm. The algorithm is iterative and allows bypassing the solution of the algebraic Riccati equation associated with the optimal control problem, typically infeasible for large systems. In this numerical work, we extend the ADA iteration into a more general framework that includes the design of controllers with multiple, coupled inputs and robust controllers (H_{∞} methods). First, we demonstrate our results by showing the analytical equivalence between the full Riccati solutions and the ADA approximations in the multiple inputs case. In the second part of the article, we analyze the performance of the algorithm in terms of convergence of the solution, by comparing it with analogous techniques. We find an excellent scalability with the number of inputs (actuators), making the method a viable way for full-order control design in complex settings. Finally, the applicability of the algorithm to fluid mechanics problems is shown using the linearized Kuramoto-Sivashinsky equation and the Kármán vortex street past a two-dimensional cylinder.

Impact of telepharmacy in a multihospital health system.

PubMed

Garrelts, James C; Gagnon, Mark; Eisenberg, Charlese; Moerer, Janell; Carrithers, Joe

2010-09-01

The impact of telepharmacy in a multihospital health system was evaluated. Telepharmacy services were implemented at five hospitals within a Catholic, nonprofit, integrated delivery network health system. Telepharmacy services were provided by seven pharmacists employed by the health system. Using a virtual private network or terminal server, pharmacists directly accessed hospital servers and information systems to conduct their work. Telephone calls were automatically routed to the telepharmacist so that handling of nursing and other calls would be transparent to staff. Hours of telepharmacy service were 5 p.m. to 2 a.m. Monday through Friday evenings at four of the hospitals and 8 p.m. to 10 p.m. at the rural hospital. Order-processing time for routine orders was reduced from 26.8 to 14 minutes (p < 0.0001), while stat order processing was shortened from 11.6 to 8.8 minutes (p = 0.007). For routine orders, turnaround times greater than 60 minutes became almost nonexistent after telepharmacy services were implemented. The number of clinical interventions documented increased by 42%, from 619 to 881, equivalent to a net annualized saving of $1,132,144. A significant improvement in nurses' global satisfaction with pharmacist availability for unit consultations was reported (3.0 versus 4.0 on a 5.0 Likert scale; p = 0.028). The implementation of telepharmacy services in a multihospital health system expanded hours of service, improved the speed of processing of physician medication orders, and increased clinical pharmacy services and cost avoidance. Surveys of health care staff found that telepharmacy services were well received.

Dynamics of dissipative self-assembly of particles interacting through oscillatory forces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tagliazucchi, M.; Szleifer, I.

Dissipative self-assembly is the formation of ordered structures far from equilibrium, which continuously uptake energy and dissipate it into the environment. Due to its dynamical nature, dissipative self-assembly can lead to new phenomena and possibilities of self-organization that are unavailable to equilibrium systems. Understanding the dynamics of dissipative self-assembly is required in order to direct the assembly to structures of interest. In the present work, Brownian dynamics simulations and analytical theory were used to study the dynamics of self-assembly of a mixture of particles coated with weak acids and bases under continuous oscillations of the pH. The pH of themore » system modulates the charge of the particles and, therefore, the interparticle forces oscillate in time. This system produces a variety of self-assembled structures, including colloidal molecules, fibers and different types of crystalline lattices. The most important conclusions of our study are: (i) in the limit of fast oscillations, the whole dynamics (and not only those at the non-equilibrium steady state) of a system of particles interacting through time-oscillating interparticle forces can be described by an effective potential that is the time average of the time-dependent potential over one oscillation period; (ii) the oscillation period is critical to determine the order of the system. In some cases the order is favored by very fast oscillations while in others small oscillation frequencies increase the order. In the latter case, it is shown that slow oscillations remove kinetic traps and, thus, allow the system to evolve towards the most stable non-equilibrium steady state.« less

Aligning leadership across systems and organizations to develop a strategic climate for evidence-based practice implementation.

PubMed

Aarons, Gregory A; Ehrhart, Mark G; Farahnak, Lauren R; Sklar, Marisa

2014-01-01

There has been a growing impetus to bridge the gap between basic science discovery, development of evidence-based practices (EBPs), and the availability and delivery of EBPs in order to improve the public health impact of such practices. To capitalize on factors that support implementation and sustainment of EBPs, it is important to consider that health care is delivered within the outer context of public health systems and the inner context of health care organizations and work groups. Leaders play a key role in determining the nature of system and organizational contexts. This article addresses the role of leadership and actions that leaders can take at and across levels in developing a strategic climate for EBP implementation within the outer (i.e., system) and inner (i.e., organization, work group) contexts of health care. Within the framework of Edgar Schein's "climate embedding mechanisms," we describe strategies that leaders at the system, organization, and work group levels can consider and apply to develop strategic climates that support the implementation and sustainment of EBP in health care and allied health care settings.

Practical and secure telemedicine systems for user mobility.

PubMed

Rezaeibagha, Fatemeh; Mu, Yi

2018-02-01

The application of wireless devices has led to a significant improvement in the quality delivery of care in telemedicine systems. Patients who live in a remote area are able to communicate with the healthcare provider and benefit from the doctor consultations. However, it has been a challenge to provide a secure telemedicine system, which captures users (patients and doctors) mobility and patient privacy. In this work, we present several secure protocols for telemedicine systems, which ensure the secure communication between patients and doctors who are located in different geographical locations. Our protocols are the first of this kind featured with confidentiality of patient information, mutual authentication, patient anonymity, data integrity, freshness of communication, and mobility. Our protocols are based on symmetric-key schemes and capture all desirable security requirements in order to better serve our objectives of research for secure telemedicine services; therefore, they are very efficient in implementation. A comparison with related works shows that our work contributes first comprehensive solution to capture user mobility and patient privacy for telemedicine systems. Copyright © 2018 Elsevier Inc. All rights reserved.

Workplace System Factors of Obstetric Nurses in Northeastern Ontario, Canada: Using a Work Disability Prevention Approach

PubMed Central

Nowrouzi, Behdin; Lightfoot, Nancy; Carter, Lorraine; Larivère, Michel; Rukholm, Ellen; Belanger-Gardner, Diane

2015-01-01

Background The purpose of this study was to examine the relationship nursing personal and workplace system factors (work disability) and work ability index scores in Ontario, Canada. Methods A total of 111 registered nurses were randomly selected from the total number of registered nurses on staff in the labor, delivery, recovery, and postpartum areas of four northeastern Ontario hospitals. Using a stratified random design approach, 51 participants were randomly selected in four northeastern Ontario cities. Results A total of 51 (45.9% response rate) online questionnaires were returned and another 60 (54.1% response rate) were completed using the paper format. The obstetric workforce in northeastern Ontario was predominately female (94.6%) with a mean age of 41.9 (standard deviation = 10.2). In the personal systems model, three variables: marital status (p = 0.025), respondent ethnicity (p = 0.026), and mean number of patients per shift (p = 0.049) were significantly contributed to the variance in work ability scores. In the workplace system model, job and career satisfaction (p = 0.026) had a positive influence on work ability scores, while work absenteeism (p = 0.023) demonstrated an inverse relationship with work ability scores. In the combined model, all the predictors were significantly related to work ability scores. Conclusion Work ability is closely related to job and career satisfaction, and perceived control at work among obstetric nursing. In order to improve work ability, nurses need to work in environments that support them and allow them to be engaged in the decision-making processes. PMID:26929842

Data Management Working Group report

NASA Technical Reports Server (NTRS)

Filardo, Edward J.; Smith, David B.

1986-01-01

The current flight qualification program lags technology insertion by 6 to 10 years. The objective is to develop an integrated software engineering and development environment assisted by an expert system technology. An operating system needs to be developed which is portable to the on-board computers of the year 2000. The use of ADA verses a High-Order Language; fault tolerance; fiber optics networks; communication protocols; and security are also examined and outlined.

Enhancing Research in Networking & System Security, and Forensics, in Puerto Rico

DTIC Science & Technology

2015-03-03

Researcher and her research revolves around using Cognitive Systems, which are machines that can think, listen and see in order to help the disabled ...Subsequence. The implementation is been conducted using R- Language because of its statistical and analysis abilities. Because it works using a command line...Technology. 14-AUG-13, . : , Eduardo Melendez. FROM RANDOM EMBEDDING TECHNIQUES TO ENTROPY USING IMAGEPOINT ADJACENT SHADE VALUES, 12th Annual

Mathematical analysis techniques for modeling the space network activities

NASA Technical Reports Server (NTRS)

Foster, Lisa M.

1992-01-01

The objective of the present work was to explore and identify mathematical analysis techniques, and in particular, the use of linear programming. This topic was then applied to the Tracking and Data Relay Satellite System (TDRSS) in order to understand the space network better. Finally, a small scale version of the system was modeled, variables were identified, data was gathered, and comparisons were made between actual and theoretical data.

JPRS Report, Soviet Union, Political Affairs

DTIC Science & Technology

1988-11-28

in the development of its physical plant , improve designing , increase work quality, as well as strengthen order and organization in the sector...time, the Academy considers it essential to develop within its system a network of design bureaus and experimental plants . It must be said that almost...insufficiently developed physical plant . Over the last 10 years, not a single bus system has been built. For more than 6 years now, a trolley bus

Recommendation of a More Effective Alternative to the NASA Launch Services Program Mission Integration Reporting System (MIRS) and Implementation of Updates to the Mission Plan

NASA Technical Reports Server (NTRS)

Dunn, Michael R.

2014-01-01

Over the course of my internship in the Flight Projects Office of NASA's Launch Services Program (LSP), I worked on two major projects, both of which dealt with updating current systems to make them more accurate and to allow them to operate more efficiently. The first project dealt with the Mission Integration Reporting System (MIRS), a web-accessible database application used to manage and provide mission status reporting for the LSP portfolio of awarded missions. MIRS had not gone through any major updates since its implementation in 2005, and it was my job to formulate a recommendation for the improvement of the system. The second project I worked on dealt with the Mission Plan, a document that contains an overview of the general life cycle that is followed by every LSP mission. My job on this project was to update the information currently in the mission plan and to add certain features in order to increase the accuracy and thoroughness of the document. The outcomes of these projects have implications in the orderly and efficient operation of the Flight Projects Office, and the process of Mission Management in the Launch Services Program as a whole.

High Temperature Electronics for Intelligent Harsh Environment Sensors

NASA Technical Reports Server (NTRS)

Evans, Laura J.

2008-01-01

The development of intelligent instrumentation systems is of high interest in both public and private sectors. In order to obtain this ideal in extreme environments (i.e., high temperature, extreme vibration, harsh chemical media, and high radiation), both sensors and electronics must be developed concurrently in order that the entire system will survive for extended periods of time. The semiconductor silicon carbide (SiC) has been studied for electronic and sensing applications in extreme environment that is beyond the capability of conventional semiconductors such as silicon. The advantages of SiC over conventional materials include its near inert chemistry, superior thermomechanical properties in harsh environments, and electronic properties that include high breakdown voltage and wide bandgap. An overview of SiC sensors and electronics work ongoing at NASA Glenn Research Center (NASA GRC) will be presented. The main focus will be two technologies currently being investigated: 1) harsh environment SiC pressure transducers and 2) high temperature SiC electronics. Work highlighted will include the design, fabrication, and application of SiC sensors and electronics, with recent advancements in state-of-the-art discussed as well. These combined technologies are studied for the goal of developing advanced capabilities for measurement and control of aeropropulsion systems, as well as enhancing tools for exploration systems.

Review of magnetic refrigeration system as alternative to conventional refrigeration system

NASA Astrophysics Data System (ADS)

Mezaal, N. A.; Osintsev, K. V.; Zhirgalova, T. B.

2017-10-01

The refrigeration system is one of the most important systems in industry. Developers are constantly seeking for how to avoid the damage to the environment. Magnetic refrigeration is an emerging, environment-friendly technology based on a magnetic solid that acts as a refrigerant by magneto-caloric effect (MCE). In the case of ferromagnetic materials, MCE warms as the magnetic moments of the atom are aligned by the application of a magnetic field. There are two types of magnetic phase changes that may occur at the Curie point: first order magnetic transition (FOMT) and second order magnetic transition (SOMT). The reference cycle for magnetic refrigeration is AMR (Active Magnetic Regenerative cycle), where the magnetic material matrix works both as a refrigerating medium and as a heat regenerating medium, while the fluid flowing in the porous matrix works as a heat transfer medium. Regeneration can be accomplished by blowing a heat transfer fluid in a reciprocating fashion through the regenerator made of magnetocaloric material that is alternately magnetized and demagnetized. Many magnetic refrigeration prototypes with different designs and software models have been built in different parts of the world. In this paper, the authors try to shed light on the magnetic refrigeration and show its effectiveness compared with conventional refrigeration methods.

Control aspects of the human cardiovascular-respiratory system under a nonconstant workload.

PubMed

Calderon, Pio Gabrielle B; Habib, Mustafa; Kappel, Franz; de Los Reyes, Aurelio A

2017-07-01

The human cardiovascular system (CVS) and respiratory system (RS) work together in order to supply oxygen (O 2 ) and other substrates needed for metabolism and to remove carbon dioxide (CO 2 ). Global and local control mechanisms act on the CVS in order to adjust blood flow to the different parts of the body. This, in turn, affects the RS since the amount of O 2 and CO 2 transported, respectively to and away from the tissues depends on the cardiac output and blood flow in both the systemic and pulmonary circuits of the CVS. Local metabolic control is influenced by local concentrations of blood gases affecting systemic resistance, resulting to vasoconstriction/vasodilation. Thus, the exchange of blood gases demands a tight coordination between blood flow and ventilation of the lungs. In this work, a model of the cardiovascular-respiratory system (CVRS) is considered to obtain an optimal control for time-dependent ergometric workloads by using the Euler-Lagrange formulation of the optimal control problem. The essential controls in the CVRS model are variations in the heart rate and alveolar ventilation through which the central nervous system restricts the arterial partial pressure of CO 2 ( [Formula: see text] ) close to 40  mmHg. Further, penalization terms in the cost functional are included to match the metabolic need for O 2 and the metabolic production of CO 2 with O 2 - and CO 2 -transport by blood. Copyright © 2017. Published by Elsevier Inc.

Vortex boundary-layer interactions

NASA Technical Reports Server (NTRS)

Bradshaw, P.

1986-01-01

Parametric studies to identify a vortex generator were completed. Data acquisition in the first chosen configuration, in which a longitudinal vortex pair generated by an isolated delta wing starts to merge with a turbulent boundary layer on a flat plate fairly close to the leading edge is nearly completed. Work on a delta-wing/flat-plate combination, consisting of a flow visualization and hot wire measurements taken with a computer controlled traverse gear and data logging system were completed. Data taking and analysis have continued, and sample results for another cross stream plane are presented. Available data include all mean velocity components, second order mean products of turbulent fluctuations, and third order mean products. Implementation of a faster data logging system was accomplished.

Techniques for Computation of Frequency Limited H∞ Norm

NASA Astrophysics Data System (ADS)

Haider, Shafiq; Ghafoor, Abdul; Imran, Muhammad; Fahad Mumtaz, Malik

2018-01-01

Traditional H ∞ norm depicts peak system gain over infinite frequency range, but many applications like filter design, model order reduction and controller design etc. require computation of peak system gain over specific frequency interval rather than infinite range. In present work, new computationally efficient techniques for computation of H ∞ norm over frequency limited interval are proposed. Proposed techniques link norm computation with maximum singular value of the system in limited frequency interval. Numerical examples are incorporated to validate the proposed concept.

Studying turbulence by remote sensing systems during slope-2016 campaign

NASA Astrophysics Data System (ADS)

Moreira, Gregori de A.; Guerrero-Rascado, Juan L.; Benavent-Oltra, Jose A.; Ortiz-Amezcua, Pablo; Róman, Roberto; Landulfo, Eduardo; Alados-Arboledas, Lucas

2018-04-01

The Planetary Boundary Layer (PBL) is the lowermost part of the troposphere. In this work, we analysed some high order moments and PBL height detected continuously by three remote sensing systems: an elastic lidar, a Doppler lidar and a passive Microwave Radiometer, during the SLOPE-2016 campaign, which was held in Granada from May to August 2016. This study confirms the feasibility of these systems for the characterization of the PBL, helping us to justify and understand its behaviour along the day.

Competitive-Cooperative Automated Reasoning from Distributed and Multiple Source of Data

NASA Astrophysics Data System (ADS)

Fard, Amin Milani

Knowledge extraction from distributed database systems, have been investigated during past decade in order to analyze billions of information records. In this work a competitive deduction approach in a heterogeneous data grid environment is proposed using classic data mining and statistical methods. By applying a game theory concept in a multi-agent model, we tried to design a policy for hierarchical knowledge discovery and inference fusion. To show the system run, a sample multi-expert system has also been developed.

User Centered System Design: Papers for the CHI � Conference on Human Factors in Computer Systems.

DTIC Science & Technology

1983-11-01

purpose of the United States Government. ONR REPORT830383 2e0 104 Unclagsified ’tCCU*ITY CLASSIFICATION OF THIS PAGE (Whom, Des enteredE) REPORT... con - mand languages versus menu-based systems, choices of names, and handheld computers versus work stations are examined briefly. UN.ATkrr SErXjftTyv...lsted above in alphabetical order their intentions during the session. An extract from one of We wish to thank Don Norman. Bob Glushko, and Jnathan

Irreversible thermodynamic analysis and application for molecular heat engines

NASA Astrophysics Data System (ADS)

Lucia, Umberto; Açıkkalp, Emin

2017-09-01

Is there a link between the macroscopic approach to irreversibility and microscopic behaviour of the systems? Consumption of free energy keeps the system away from a stable equilibrium. Entropy generation results from the redistribution of energy, momentum, mass and charge. This concept represents the essence of the thermodynamic approach to irreversibility. Irreversibility is the result of the interaction between systems and their environment. The aim of this paper is to determine lost works in a molecular engine and compare results with macro (classical) heat engines. Firstly, irreversible thermodynamics are reviewed for macro and molecular cycles. Secondly, irreversible thermodynamics approaches are applied for a quantum heat engine with -1/2 spin system. Finally, lost works are determined for considered system and results show that macro and molecular heat engines obey same limitations. Moreover, a quantum thermodynamic approach is suggested in order to explain the results previously obtained from an atomic viewpoint.

Compact, semi-passive beam steering prism array for solar concentrators.

PubMed

Zheng, Cheng; Li, Qiyuan; Rosengarten, Gary; Hawkes, Evatt; Taylor, Robert A

2017-05-10

In order to maximize solar energy utilization in a limited space (e.g., rooftops), solar collectors should track the sun. As an alternative to rotational tracking systems, this paper presents a compact, semi-passive beam steering prism array which has been designed, analyzed, and tested for solar applications. The proposed prism array enables a linear concentrator system to remain stationary so that it can integrate with a variety of different solar concentrators, and which should be particularly useful for systems which require a low profile (namely rooftop-mounted systems). A case study of this prism array working within a specific rooftop solar collector demonstrates that it can boost the average daily optical efficiency of the collector by 32.7% and expand its effective working time from 6 h to 7.33 h. Overall, the proposed design provides an alternative way to "follow" the sun for a wide range of solar thermal and photovoltaic concentrator systems.

A Brain System for Auditory Working Memory.

PubMed

Kumar, Sukhbinder; Joseph, Sabine; Gander, Phillip E; Barascud, Nicolas; Halpern, Andrea R; Griffiths, Timothy D

2016-04-20

The brain basis for auditory working memory, the process of actively maintaining sounds in memory over short periods of time, is controversial. Using functional magnetic resonance imaging in human participants, we demonstrate that the maintenance of single tones in memory is associated with activation in auditory cortex. In addition, sustained activation was observed in hippocampus and inferior frontal gyrus. Multivoxel pattern analysis showed that patterns of activity in auditory cortex and left inferior frontal gyrus distinguished the tone that was maintained in memory. Functional connectivity during maintenance was demonstrated between auditory cortex and both the hippocampus and inferior frontal cortex. The data support a system for auditory working memory based on the maintenance of sound-specific representations in auditory cortex by projections from higher-order areas, including the hippocampus and frontal cortex. In this work, we demonstrate a system for maintaining sound in working memory based on activity in auditory cortex, hippocampus, and frontal cortex, and functional connectivity among them. Specifically, our work makes three advances from the previous work. First, we robustly demonstrate hippocampal involvement in all phases of auditory working memory (encoding, maintenance, and retrieval): the role of hippocampus in working memory is controversial. Second, using a pattern classification technique, we show that activity in the auditory cortex and inferior frontal gyrus is specific to the maintained tones in working memory. Third, we show long-range connectivity of auditory cortex to hippocampus and frontal cortex, which may be responsible for keeping such representations active during working memory maintenance. Copyright © 2016 Kumar et al.

Optimal Control for Aperiodic Dual-Rate Systems With Time-Varying Delays

PubMed Central

Salt, Julián; Guinaldo, María; Chacón, Jesús

2018-01-01

In this work, we consider a dual-rate scenario with slow input and fast output. Our objective is the maximization of the decay rate of the system through the suitable choice of the n-input signals between two measures (periodic sampling) and their times of application. The optimization algorithm is extended for time-varying delays in order to make possible its implementation in networked control systems. We provide experimental results in an air levitation system to verify the validity of the algorithm in a real plant. PMID:29747441

Full-scale system impact analysis: Digital document storage project

NASA Technical Reports Server (NTRS)

1989-01-01

The Digital Document Storage Full Scale System can provide cost effective electronic document storage, retrieval, hard copy reproduction, and remote access for users of NASA Technical Reports. The desired functionality of the DDS system is highly dependent on the assumed requirements for remote access used in this Impact Analysis. It is highly recommended that NASA proceed with a phased, communications requirement analysis to ensure that adequate communications service can be supplied at a reasonable cost in order to validate recent working assumptions upon which the success of the DDS Full Scale System is dependent.

Research on large equipment maintenance system in life cycle

NASA Astrophysics Data System (ADS)

Xu, Xiaowei; Wang, Hongxia; Liu, Zhenxing; Zhang, Nan

2017-06-01

In order to change the current disadvantages of traditional large equipment maintenance concept, this article plans to apply the technical method of prognostics and health management to optimize equipment maintenance strategy and develop large equipment maintenance system. Combined with the maintenance procedures of various phases in life cycle, it concluded the formulation methods of maintenance program and implement plans of maintenance work. In the meantime, it takes account into the example of the dredger power system of the Waterway Bureau to establish the auxiliary platform of ship maintenance system in life cycle.

Optimal Control for Aperiodic Dual-Rate Systems With Time-Varying Delays.

PubMed

Aranda-Escolástico, Ernesto; Salt, Julián; Guinaldo, María; Chacón, Jesús; Dormido, Sebastián

2018-05-09

In this work, we consider a dual-rate scenario with slow input and fast output. Our objective is the maximization of the decay rate of the system through the suitable choice of the n -input signals between two measures (periodic sampling) and their times of application. The optimization algorithm is extended for time-varying delays in order to make possible its implementation in networked control systems. We provide experimental results in an air levitation system to verify the validity of the algorithm in a real plant.

Simulation of an active solar energy system integrated in a passive building in order to obtain system efficiency

NASA Astrophysics Data System (ADS)

Ceacaru, Mihai C.

2012-11-01

In this work we present a simulation of an active solar energy system. This system belongs to the first passive office building (2086 square meters) in Romania and it is used for water heating consumption. This office building was opened in February 2009 and was built based on passive house design solutions. For this simulation, we use Solar Water Heating module, which belongs to the software RETSCREEN and this simulation is done for several cities in Romania. Results obtained will be compared graphically.

78 FR 39015 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Work...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... for OMB Review; Comment Request; Work Application and Job Order Recordkeeping ACTION: Notice. SUMMARY... information collection request (ICR) titled, ``Work Application and Job Order Recordkeeping,'' to the Office...) for States to maintain work applications and job orders for one year. A work application is used in an...

A Realtime Active Feedback Control System For Coupled Nonlinear Chemical Oscillators

NASA Astrophysics Data System (ADS)

Tompkins, Nathan; Fraden, Seth

2012-02-01

We study the manipulation and control of oscillatory networks. As a model system we use an emulsion of Belousov-Zhabotinsky (BZ) oscillators packed on a hexagonal lattice. Each drop is observed and perturbed by a Programmable Illumination Microscope (PIM). The PIM allows us to track individual BZ oscillators, calculate the phase and order parameters of every drop, and selectively perturb specific drops with photo illumination, all in realtime. To date we have determined the native attractor patterns for drops in 1D arrays and 2D hexagonal packing as a function of coupling strength as well as determined methods to move the system from one attractor basin to another. Current work involves implementing these attractor control methods with our experimental system and future work will likely include implementing a model neural network for use with photo controllable BZ emulsions.

Sensor fault detection and isolation system for a condensation process.

PubMed

Castro, M A López; Escobar, R F; Torres, L; Aguilar, J F Gómez; Hernández, J A; Olivares-Peregrino, V H

2016-11-01

This article presents the design of a sensor Fault Detection and Isolation (FDI) system for a condensation process based on a nonlinear model. The condenser is modeled by dynamic and thermodynamic equations. For this work, the dynamic equations are described by three pairs of differential equations which represent the energy balance between the fluids. The thermodynamic equations consist in algebraic heat transfer equations and empirical equations, that allow for the estimation of heat transfer coefficients. The FDI system consists of a bank of two nonlinear high-gain observers, in order to detect, estimate and to isolate the fault in any of both outlet temperature sensors. The main contributions of this work were the experimental validation of the condenser nonlinear model and the FDI system. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Outbrief - Long Life Rocket Engine Panel

NASA Technical Reports Server (NTRS)

Quinn, Jason Eugene

2004-01-01

This white paper is an overview of the JANNAF Long Life Rocket Engine (LLRE) Panel results from the last several years of activity. The LLRE Panel has met over the last several years in order to develop an approach for the development of long life rocket engines. Membership for this panel was drawn from a diverse set of the groups currently working on rocket engines (Le. government labs, both large and small companies and university members). The LLRE Panel was formed in order to determine the best way to enable the design of rocket engine systems that have life capability greater than 500 cycles while meeting or exceeding current performance levels (Specific Impulse and Thrust/Weight) with a 1/1,OOO,OOO likelihood of vehicle loss due to rocket system failure. After several meetings and much independent work the panel reached a consensus opinion that the primary issues preventing LLRE are a lack of: physics based life prediction, combined loads prediction, understanding of material microphysics, cost effective system level testing. and the inclusion of fabrication process effects into physics based models. With the expected level of funding devoted to LLRE development, the panel recommended that fundamental research efforts focused on these five areas be emphasized.

Spaceport Command and Control System Support Software Development

NASA Technical Reports Server (NTRS)

Brunotte, Leonard

2016-01-01

The Spaceport Command and Control System (SCCS) is a project developed and used by NASA at Kennedy Space Center in order to control and monitor the Space Launch System (SLS) at the time of its launch. One integral subteam under SCCS is the one assigned to the development of a data set building application to be used both on the launch pad and in the Launch Control Center (LCC) at the time of launch. This web application was developed in Ruby on Rails, a web framework using the Ruby object-oriented programming language, by a 15 - employee team (approx.). Because this application is such a huge undertaking with many facets and iterations, there were a few areas in which work could be more easily organized and expedited. As an intern working with this team, I was charged with the task of writing web applications that fulfilled this need, creating a virtual and highly customizable whiteboard in order to allow engineers to keep track of build iterations and their status. Additionally, I developed a knowledge capture web application wherein any engineer or contractor within SCCS could ask a question, answer an existing question, or leave a comment on any question or answer, similar to Stack Overflow.

A portable hardware-in-the-loop (HIL) device for automotive diagnostic control systems.

PubMed

Palladino, A; Fiengo, G; Lanzo, D

2012-01-01

In-vehicle driving tests for evaluating the performance and diagnostic functionalities of engine control systems are often time consuming, expensive, and not reproducible. Using a hardware-in-the-loop (HIL) simulation approach, new control strategies and diagnostic functions on a controller area network (CAN) line can be easily tested in real time, in order to reduce the effort and the cost of the testing phase. Nowadays, spark ignition engines are controlled by an electronic control unit (ECU) with a large number of embedded sensors and actuators. In order to meet the rising demand of lower emissions and fuel consumption, an increasing number of control functions are added into such a unit. This work aims at presenting a portable electronic environment system, suited for HIL simulations, in order to test the engine control software and the diagnostic functionality on a CAN line, respectively, through non-regression and diagnostic tests. The performances of the proposed electronic device, called a micro hardware-in-the-loop system, are presented through the testing of the engine management system software of a 1.6 l Fiat gasoline engine with variable valve actuation for the ECU development version. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Observation of discrete time-crystalline order in a disordered dipolar many-body system

PubMed Central

Kucsko, Georg; Zhou, Hengyun; Isoya, Junichi; Jelezko, Fedor; Onoda, Shinobu; Sumiya, Hitoshi; Khemani, Vedika; von Keyserlingk, Curt; Yao, Norman Y.; Demler, Eugene; Lukin, Mikhail D.

2017-01-01

Understanding quantum dynamics away from equilibrium is an outstanding challenge in the modern physical sciences. It is well known that out-of-equilibrium systems can display a rich array of phenomena, ranging from self-organized synchronization to dynamical phase transitions1,2. More recently, advances in the controlled manipulation of isolated many-body systems have enabled detailed studies of non-equilibrium phases in strongly interacting quantum matter3–6. As a particularly striking example, the interplay of periodic driving, disorder, and strong interactions has recently been predicted to result in exotic “time-crystalline” phases7, which spontaneously break the discrete time-translation symmetry of the underlying drive8–11. Here, we report the experimental observation of such discrete time-crystalline order in a driven, disordered ensemble of ~ 106 dipolar spin impurities in diamond at room-temperature12–14. We observe long-lived temporal correlations at integer multiples of the fundamental driving period, experimentally identify the phase boundary and find that the temporal order is protected by strong interactions; this order is remarkably stable against perturbations, even in the presence of slow thermalization15,16. Our work opens the door to exploring dynamical phases of matter and controlling interacting, disordered many-body systems17–19. PMID:28277511

A graphical, rule based robotic interface system

NASA Technical Reports Server (NTRS)

Mckee, James W.; Wolfsberger, John

1988-01-01

The ability of a human to take control of a robotic system is essential in any use of robots in space in order to handle unforeseen changes in the robot's work environment or scheduled tasks. But in cases in which the work environment is known, a human controlling a robot's every move by remote control is both time consuming and frustrating. A system is needed in which the user can give the robotic system commands to perform tasks but need not tell the system how. To be useful, this system should be able to plan and perform the tasks faster than a telerobotic system. The interface between the user and the robot system must be natural and meaningful to the user. A high level user interface program under development at the University of Alabama, Huntsville, is described. A graphical interface is proposed in which the user selects objects to be manipulated by selecting representations of the object on projections of a 3-D model of the work environment. The user may move in the work environment by changing the viewpoint of the projections. The interface uses a rule based program to transform user selection of items on a graphics display of the robot's work environment into commands for the robot. The program first determines if the desired task is possible given the abilities of the robot and any constraints on the object. If the task is possible, the program determines what movements the robot needs to make to perform the task. The movements are transformed into commands for the robot. The information defining the robot, the work environment, and how objects may be moved is stored in a set of data bases accessible to the program and displayable to the user.

Summary of the NICHD-BPCA Pediatric Formulation Initiatives Workshop-Pediatric Biopharmaceutics Classification System (PBCS) Working Group

PubMed Central

Abdel-Rahman, Susan; Amidon, Gordon L.; Kaul, Ajay; Lukacova, Viera; Vinks, Alexander A.; Knipp, Gregory

2012-01-01

The Biopharmaceutics Classification System (BCS) allows compounds to be classified based on their in vitro solubility and intestinal permeability. The BCS has found widespread use in the pharmaceutical community as an enabling guide for the rational selection of compounds, formulation for clinical advancement and generic biowaivers. The Pediatric Biopharmaceutics Classification System (PBCS) working group was convened to consider the possibility of developing an analogous pediatric based classification system. Since there are distinct developmental differences that can alter intestinal contents, volumes, permeability and potentially biorelevant solubilities at the different ages, the PBCS working group focused on identifying age specific issues that would need to be considered in establishing a flexible, yet rigorous PBCS. Objective To summarize the findings of the PBCS working group and provide insights into considerations required for the development of a pediatric based biopharmaceutics classification system. Methods Through several meetings conducted both at The Eunice Kennedy Shriver National Institute of Child Health, Human Development (NICHD)-US Pediatric Formulation Initiative (PFI) workshop (November 2011) and via teleconferences, the PBCS working group considered several high level questions that were raised to frame the classification system. In addition, the PBCS working group identified a number of knowledge gaps that would need to be addressed in order to develop a rigorous PBCS. Results It was determined that for a PBCS to be truly meaningful, it would need to be broken down into several different age groups that would account for developmental changes in intestinal permeability, luminal contents, and gastrointestinal transit. Several critical knowledge gaps where identified including: 1) a lack of fully understanding the ontogeny of drug metabolizing enzymes and transporters along the gastrointestinal (GI) tract, in the liver and in the kidney; 2) an incomplete understanding of age-based changes in the GI, liver and kidney physiology; 3) a clear need to better understand age-based intestinal permeability and fraction absorbed required to develop the PBCS; 4) a clear need for the development and organization of pediatric tissue biobanks to serve as a source for ontogenic research; and 5) a lack of literature published in age-based pediatric pharmacokinetics in order to build Physiologically- and Population-Based Pharmacokinetic (PBPK) databases. Conclusions To begin the process of establishing a PBPK model, ten pediatric therapeutic agents were selected (based on their adult BCS classifications). Those agents should be targeted for additional research in the future. The PBCS working group also identified several areas where a greater emphasis on research is needed to enable the development of a PBCS. PMID:23149009

Verifying the Modal Logic Cube Is an Easy Task (For Higher-Order Automated Reasoners)

NASA Astrophysics Data System (ADS)

Benzmüller, Christoph

Prominent logics, including quantified multimodal logics, can be elegantly embedded in simple type theory (classical higher-order logic). Furthermore, off-the-shelf reasoning systems for simple type type theory exist that can be uniformly employed for reasoning within and about embedded logics. In this paper we focus on reasoning about modal logics and exploit our framework for the automated verification of inclusion and equivalence relations between them. Related work has applied first-order automated theorem provers for the task. Our solution achieves significant improvements, most notably, with respect to elegance and simplicity of the problem encodings as well as with respect to automation performance.

Reduced-Order Direct Numerical Simulation of Solute Transport in Porous Media

NASA Astrophysics Data System (ADS)

Mehmani, Yashar; Tchelepi, Hamdi

2017-11-01

Pore-scale models are an important tool for analyzing fluid dynamics in porous materials (e.g., rocks, soils, fuel cells). Current direct numerical simulation (DNS) techniques, while very accurate, are computationally prohibitive for sample sizes that are statistically representative of the porous structure. Reduced-order approaches such as pore-network models (PNM) aim to approximate the pore-space geometry and physics to remedy this problem. Predictions from current techniques, however, have not always been successful. This work focuses on single-phase transport of a passive solute under advection-dominated regimes and delineates the minimum set of approximations that consistently produce accurate PNM predictions. Novel network extraction (discretization) and particle simulation techniques are developed and compared to high-fidelity DNS simulations for a wide range of micromodel heterogeneities and a single sphere pack. Moreover, common modeling assumptions in the literature are analyzed and shown that they can lead to first-order errors under advection-dominated regimes. This work has implications for optimizing material design and operations in manufactured (electrodes) and natural (rocks) porous media pertaining to energy systems. This work was supported by the Stanford University Petroleum Research Institute for Reservoir Simulation (SUPRI-B).

The Medical Gopher—A Microcomputer System to Help Find, Organize and Decide About Patient Data

PubMed Central

McDonald, Clement J.; Tierney, William M.

1986-01-01

We have developed a microcomputer-based medical workstation that does some of physicians' “gopher” work of fetching, organizing, reviewing and recording. For two years physicians have used the first version of this system to order all diagnostic tests in a general medicine clinic. They are about to use a newer version to write prescriptions and office visit notes and to find general medical and patient-specific information. Users can enter data into this system by “pointing” with a “mouse” to menu items displayed on a video terminal. In the course of a computer activity, a physician can obtain information about drugs, tests and different diagnoses, as well as about the patient. The microcomputer workstations are linked to each other and to a central hospital information system through a high-speed network link. Our physicians have accepted the initial order-entry system, and early experience suggests they prefer this faster and more sophisticated system. PMID:3811348

Relating Out-of-Time-Order Correlations to Entanglement via Multiple-Quantum Coherences.

PubMed

Gärttner, Martin; Hauke, Philipp; Rey, Ana Maria

2018-01-26

Out-of-time-order correlations (OTOCs) characterize the scrambling, or delocalization, of quantum information over all the degrees of freedom of a system and thus have been proposed as a proxy for chaos in quantum systems. Recent experimental progress in measuring OTOCs calls for a more thorough understanding of how these quantities characterize complex quantum systems, most importantly in terms of the buildup of entanglement. Although a connection between OTOCs and entanglement entropy has been derived, the latter only quantifies entanglement in pure systems and is hard to access experimentally. In this work, we formally demonstrate that the multiple-quantum coherence spectra, a specific family of OTOCs well known in NMR, can be used as an entanglement witness and as a direct probe of multiparticle entanglement. Our results open a path to experimentally testing the fascinating idea that entanglement is the underlying glue that links thermodynamics, statistical mechanics, and quantum gravity.

Genome Engineering of the 2,3-Butanediol Biosynthetic Pathway for Tight Regulation in Cyanobacteria.

PubMed

Nozzi, Nicole E; Atsumi, Shota

2015-11-20

Cyanobacteria have gained popularity among the metabolic engineering community as a tractable photosynthetic host for renewable chemical production. However, though a number of successfully engineered production systems have been reported, long-term genetic stability remains an issue for cyanobacterial systems. The genetic engineering toolbox for cyanobacteria is largely lacking inducible systems for expression control. The characterization of tight regulation systems for use in cyanobacteria may help to alleviate this problem. In this work we explore the function of the IPTG inducible promoter P(L)lacO1 in the model cyanobacterium Synechococcus elongatus PCC 7942 as well as the effect of gene order within an operon on pathway expression. According to our experiments, P(L)lacO1 functions well as an inducible promoter in S. elongatus. Additionally, we found that gene order within an operon can strongly influence control of expression of each gene.

An ordinal classification approach for CTG categorization.

PubMed

Georgoulas, George; Karvelis, Petros; Gavrilis, Dimitris; Stylios, Chrysostomos D; Nikolakopoulos, George

2017-07-01

Evaluation of cardiotocogram (CTG) is a standard approach employed during pregnancy and delivery. But, its interpretation requires high level expertise to decide whether the recording is Normal, Suspicious or Pathological. Therefore, a number of attempts have been carried out over the past three decades for development automated sophisticated systems. These systems are usually (multiclass) classification systems that assign a category to the respective CTG. However most of these systems usually do not take into consideration the natural ordering of the categories associated with CTG recordings. In this work, an algorithm that explicitly takes into consideration the ordering of CTG categories, based on binary decomposition method, is investigated. Achieved results, using as a base classifier the C4.5 decision tree classifier, prove that the ordinal classification approach is marginally better than the traditional multiclass classification approach, which utilizes the standard C4.5 algorithm for several performance criteria.

A High-Order, Linear Time-Invariant Model for Application to Higher Harmonic Control and Flight Control System Interaction

NASA Technical Reports Server (NTRS)

Cheng, Rendy P.; Tischler, Mark B.; Celi, Roberto

2006-01-01

This research describes a new methodology for the extraction of a high-order, linear time invariant model, which allows the periodicity of the helicopter response to be accurately captured. This model provides the needed level of dynamic fidelity to permit an analysis and optimization of the AFCS and HHC algorithms. The key results of this study indicate that the closed-loop HHC system has little influence on the AFCS or on the vehicle handling qualities, which indicates that the AFCS does not need modification to work with the HHC system. However, the results show that the vibration response to maneuvers must be considered during the HHC design process, and this leads to much higher required HHC loop crossover frequencies. This research also demonstrates that the transient vibration responses during maneuvers can be reduced by optimizing the closed-loop higher harmonic control algorithm using conventional control system analyses.

Relating Out-of-Time-Order Correlations to Entanglement via Multiple-Quantum Coherences

NASA Astrophysics Data System (ADS)

Gärttner, Martin; Hauke, Philipp; Rey, Ana Maria

2018-01-01

Out-of-time-order correlations (OTOCs) characterize the scrambling, or delocalization, of quantum information over all the degrees of freedom of a system and thus have been proposed as a proxy for chaos in quantum systems. Recent experimental progress in measuring OTOCs calls for a more thorough understanding of how these quantities characterize complex quantum systems, most importantly in terms of the buildup of entanglement. Although a connection between OTOCs and entanglement entropy has been derived, the latter only quantifies entanglement in pure systems and is hard to access experimentally. In this work, we formally demonstrate that the multiple-quantum coherence spectra, a specific family of OTOCs well known in NMR, can be used as an entanglement witness and as a direct probe of multiparticle entanglement. Our results open a path to experimentally testing the fascinating idea that entanglement is the underlying glue that links thermodynamics, statistical mechanics, and quantum gravity.

PID Controller Settings Based on a Transient Response Experiment

ERIC Educational Resources Information Center

Silva, Carlos M.; Lito, Patricia F.; Neves, Patricia S.; Da Silva, Francisco A.

2008-01-01

An experimental work on controller tuning for chemical engineering undergraduate students is proposed using a small heat exchange unit. Based upon process reaction curves in open-loop configuration, system gain and time constant are determined for first order model with time delay with excellent accuracy. Afterwards students calculate PID…

Range-Gated Metrology with Compact Optical Head

NASA Technical Reports Server (NTRS)

Dubovitsky, Serge; Shaddock, Daniel; Ware, Brent; Lay, Oliver

2008-01-01

This work represents a radical simplification in the design of the optical head needed for high-precision laser ranging applications. The optical head is now a single fiber-optic collimator with dimensions of order of 1 1 2 cm, which can be easily integrated into the system being measured with minimal footprint.

Basic & Survival Consumer Economics for Adult Refugees.

ERIC Educational Resources Information Center

Carlston, Peter G.

Prepared to help teachers address the basic and survival level consumer needs of adult Vietnamese and Laotian refugees, this instructional guide consists of five units of instructional materials. Topics of the individual units are (1) how the monetary system works (cash, checks, postal money orders, banking); (2) the family consumer (personal and…

48 CFR 252.219-7011 - Notification to delay performance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... begin performance under this purchase order until 2 working days have passed from the date of its... performance. 252.219-7011 Section 252.219-7011 Federal Acquisition Regulations System DEFENSE ACQUISITION... of Provisions And Clauses 252.219-7011 Notification to delay performance. As prescribed in 219.811-3...

Application of Fisher Information to Complex Dynamic Systems

EPA Science Inventory

Fisher information was developed by the statistician Ronald Fisher as a measure of the information obtainable from data being used to fit a related parameter. Starting from the work of Ronald Fisher1 and B. Roy Frieden2, we have developed Fisher information as a measure of order ...

Application of Fisher Information to Complex Dynamic Systems (Tucson)

EPA Science Inventory

Fisher information was developed by the statistician Ronald Fisher as a measure of the information obtainable from data being used to fit a related parameter. Starting from the work of Ronald Fisher1 and B. Roy Frieden2, we have developed Fisher information as a measure of order ...

17 CFR 256.01-11 - Methods of allocation.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) UNIFORM SYSTEM OF ACCOUNTS FOR MUTUAL SERVICE COMPANIES AND SUBSIDIARY SERVICE COMPANIES, PUBLIC UTILITY HOLDING COMPANY ACT OF 1935 General Instructions § 256.01-11 Methods of allocation. Indirect costs and compensation for use of capital shall be allocated to work orders in accordance with the service company's...

17 CFR 256.01-10 - Billing procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... accounts prescribed by the regulatory authorities to which it is subject. Each month a statement shall be rendered to the associate company containing a summary of the accounts by work order by which the charges...) UNIFORM SYSTEM OF ACCOUNTS FOR MUTUAL SERVICE COMPANIES AND SUBSIDIARY SERVICE COMPANIES, PUBLIC UTILITY...