Post-analysis report on Chesapeake Bay data processing. [spectral analysis and recognition computer signature extension

NASA Technical Reports Server (NTRS)

Thomson, F.

1972-01-01

The additional processing performed on data collected over the Rhode River Test Site and Forestry Site in November 1970 is reported. The techniques and procedures used to obtain the processed results are described. Thermal data collected over three approximately parallel lines of the site were contoured, and the results color coded, for the purpose of delineating important scene constituents and to identify trees attacked by pine bark beetles. Contouring work and histogram preparation are reviewed and the important conclusions from the spectral analysis and recognition computer (SPARC) signature extension work are summarized. The SPARC setup and processing records are presented and recommendations are made for future data collection over the site.

Sociotechnical attributes of safe and unsafe work systems.

PubMed

Kleiner, Brian M; Hettinger, Lawrence J; DeJoy, David M; Huang, Yuang-Hsiang; Love, Peter E D

2015-01-01

Theoretical and practical approaches to safety based on sociotechnical systems principles place heavy emphasis on the intersections between social-organisational and technical-work process factors. Within this perspective, work system design emphasises factors such as the joint optimisation of social and technical processes, a focus on reliable human-system performance and safety metrics as design and analysis criteria, the maintenance of a realistic and consistent set of safety objectives and policies, and regular access to the expertise and input of workers. We discuss three current approaches to the analysis and design of complex sociotechnical systems: human-systems integration, macroergonomics and safety climate. Each approach emphasises key sociotechnical systems themes, and each prescribes a more holistic perspective on work systems than do traditional theories and methods. We contrast these perspectives with historical precedents such as system safety and traditional human factors and ergonomics, and describe potential future directions for their application in research and practice. The identification of factors that can reliably distinguish between safe and unsafe work systems is an important concern for ergonomists and other safety professionals. This paper presents a variety of sociotechnical systems perspectives on intersections between social--organisational and technology--work process factors as they impact work system analysis, design and operation.

Work Flow Analysis Report Action Tracking

DOE Office of Scientific and Technical Information (OSTI.GOV)

PETERMANN, M.L.

The Work Flow Analysis Report will be used to facilitate the requirements for implementing the further deployment of the Action Tracking module of Passport. The report consists of workflow integration processes for Action Tracking.

Rework and workarounds in nurse medication administration process: implications for work processes and patient safety.

PubMed

Halbesleben, Jonathon R B; Savage, Grant T; Wakefield, Douglas S; Wakefield, Bonnie J

2010-01-01

Health care organizations have redesigned existing and implemented new work processes intended to improve patient safety. As a consequence of these process changes, there are now intentionally designed "blocks" or barriers that limit how specific work actions, such as ordering and administering medication, are to be carried out. Health care professionals encountering these designed barriers can choose to either follow the new process, engage in workarounds to get past the block, or potentially repeat work (rework). Unfortunately, these workarounds and rework may lead to other safety concerns. The aim of this study was to examine rework and workarounds in hospital medication administration processes. Observations and semistructured interviews were conducted with 58 nurses from four hospital intensive care units focusing on the medication administration process. Using the constant comparative method, we analyzed the observation and interview data to develop themes regarding rework and workarounds. From this analysis, we developed an integrated process map of the medication administration process depicting blocks. A total of 12 blocks were reported by the participants. Based on the analysis, we categorized them as related to information exchange, information entry, and internal supply chain issues. Whereas information exchange and entry blocks tended to lead to rework, internal supply chain issues were more likely to lead to workarounds. A decentralized pharmacist on the unit may reduce work flow blocks (and, thus, workarounds and rework). Work process redesign may further address the problems of workarounds and rework.

Combination of process and vibration data for improved condition monitoring of industrial systems working under variable operating conditions

NASA Astrophysics Data System (ADS)

Ruiz-Cárcel, C.; Jaramillo, V. H.; Mba, D.; Ottewill, J. R.; Cao, Y.

2016-01-01

The detection and diagnosis of faults in industrial processes is a very active field of research due to the reduction in maintenance costs achieved by the implementation of process monitoring algorithms such as Principal Component Analysis, Partial Least Squares or more recently Canonical Variate Analysis (CVA). Typically the condition of rotating machinery is monitored separately using vibration analysis or other specific techniques. Conventional vibration-based condition monitoring techniques are based on the tracking of key features observed in the measured signal. Typically steady-state loading conditions are required to ensure consistency between measurements. In this paper, a technique based on merging process and vibration data is proposed with the objective of improving the detection of mechanical faults in industrial systems working under variable operating conditions. The capabilities of CVA for detection and diagnosis of faults were tested using experimental data acquired from a compressor test rig where different process faults were introduced. Results suggest that the combination of process and vibration data can effectively improve the detectability of mechanical faults in systems working under variable operating conditions.

[Process management in the hospital pharmacy for the improvement of the patient safety].

PubMed

Govindarajan, R; Perelló-Juncá, A; Parès-Marimòn, R M; Serrais-Benavente, J; Ferrandez-Martí, D; Sala-Robinat, R; Camacho-Calvente, A; Campabanal-Prats, C; Solà-Anderiu, I; Sanchez-Caparrós, S; Gonzalez-Estrada, J; Martinez-Olalla, P; Colomer-Palomo, J; Perez-Mañosas, R; Rodríguez-Gallego, D

2013-01-01

To define a process management model for a hospital pharmacy in order to measure, analyse and make continuous improvements in patient safety and healthcare quality. In order to implement process management, Igualada Hospital was divided into different processes, one of which was the Hospital Pharmacy. A multidisciplinary management team was given responsibility for each process. For each sub-process one person was identified to be responsible, and a working group was formed under his/her leadership. With the help of each working group, a risk analysis using failure modes and effects analysis (FMEA) was performed, and the corresponding improvement actions were implemented. Sub-process indicators were also identified, and different process management mechanisms were introduced. The first risk analysis with FMEA produced more than thirty preventive actions to improve patient safety. Later, the weekly analysis of errors, as well as the monthly analysis of key process indicators, permitted us to monitor process results and, as each sub-process manager participated in these meetings, also to assume accountability and responsibility, thus consolidating the culture of excellence. The introduction of different process management mechanisms, with the participation of people responsible for each sub-process, introduces a participative management tool for the continuous improvement of patient safety and healthcare quality. Copyright © 2012 SECA. Published by Elsevier Espana. All rights reserved.

An Analysis of the Air Force Government Operated Civil Engineering Supply Store Logistic System: How Can It Be Improved?

DTIC Science & Technology

1990-09-01

6 Logistics Systems ............ 7 GOCESS Operation . . . . . . . ..... 9 Work Order Processing . . . . ... 12 Job Order Processing . . . . . . . . . . 14...orders and job orders to the Material Control Section will be discussed separately. Work Order Processing . Figure 2 illustrates typical WO processing...logistics function. The JO processing is similar. Job Order Processing . Figure 3 illustrates typical JO processing in a GOCESS operation. As with WOs, this

Visibility into the Work: TQM Work Process Analysis with HPT and ISD.

ERIC Educational Resources Information Center

Beagles, Charles A.; Griffin, Steven L.

2003-01-01

Discusses the use of total quality management (TQM), work process flow diagrams, and ISD (instructional systems development) tools with HPT (human performance technology) to address performance gaps in the Veterans Benefits Administration (VBA). Describes performance goals, which were to improve accuracy and reduce backlog of claim files. (LRW)

[Health community agent: subject of the buccal health practice in Alagoinhas, Bahia state].

PubMed

Rodrigues, Ana Aurea Alécio de Oliveira; Santos, Adriano Maia Dos; Assis, Marluce Maria Araújo

2010-05-01

This study about the work of micro politics was carried out by the Buccal Health Team (ESB) in the Family Health Program (PSF) of Alagoinhas, Bahia State, and has as central theoretical purpose the specific and singular forms in the practice of daily work, using the technologies (hard, light-hard and light). The methodological trajectory is based on the historical-social current in view of a dialectic approach of qualitative nature. The techniques of data collection used were: semi structured interview, observation of the work process and documental analysis. The analysis of the data was oriented by the hermeneutics-dialectics, allowing to compare the different levels of analysis, articulating the theoretical with the empirical evidence. The results reveal that the Family Health Teams are multidisciplinary, but have still not developed an interdisciplinary work, hence occurring juxtaposition of skills. Each unit plans their work process according to the singularities of the social subjects, implementing different characteristics in how to welcome, inform, attend and refer. An effort in changing the work process can be perceived in the perspective of amplified clinic with the health community agent standing out as a social/collective subject.

Philippine Wind Farm Analysis and Site Selection Analysis, 1 January 2000 - 31 December 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, K.

2001-12-01

The U.S. Department of Energy (DOE), through the National Renewable Energy Laboratory (NREL), has been working in partnership with the U.S. Agency for International Development (USAID) in an ongoing process to quantify the Philippine wind energy potential and foster wind farm development. As part of that process, NREL retained Global Energy Concepts, LLC (GEC) to review and update the policy needs as well as develop a site-screening process applicable for the Philippines. GEC worked closely with the Philippines National Power Corporation (NPC) in completing this work. This report provides the results of the policy needs and site selection analyses conductedmore » by GEC.« less

Intelligent Work Process Engineering System

NASA Technical Reports Server (NTRS)

Williams, Kent E.

2003-01-01

Optimizing performance on work activities and processes requires metrics of performance for management to monitor and analyze in order to support further improvements in efficiency, effectiveness, safety, reliability and cost. Information systems are therefore required to assist management in making timely, informed decisions regarding these work processes and activities. Currently information systems regarding Space Shuttle maintenance and servicing do not exist to make such timely decisions. The work to be presented details a system which incorporates various automated and intelligent processes and analysis tools to capture organize and analyze work process related data, to make the necessary decisions to meet KSC organizational goals. The advantages and disadvantages of design alternatives to the development of such a system will be discussed including technologies, which would need to bedesigned, prototyped and evaluated.

Quality Improvement of Ground Works Process with the Use of Chosen Lean Management Tools - Case Study

NASA Astrophysics Data System (ADS)

Nowotarski, Piotr; Paslawski, Jerzy; Wysocki, Bartosz

2017-12-01

Ground works are one of the first processes connected with erecting structures. Based on ground conditions like the type of soil or level of underground water different types and solutions for foundations are designed. Foundations are the base for the buildings, and their proper design and execution is the key for the long and faultless use of the whole construction and might influence on the future costs of the eventual repairs (especially when ground water level is high, and there is no proper water insulation made). Article presents the introduction of chosen Lean Management tools for quality improvement of the process of ground works based on the analysis made on the construction site of vehicle control station located in Poznan, Poland. Processes assessment is made from different perspectives taking into account that 3 main groups of workers were directly involved in the process: blue collar-workers, site manager and site engineers. What is more comparison is made on the 3 points of view to the problems that might occur during this type of works, with details analysis on the causes of such situation? Authors presents also the change of approach of workers directly involved in the mentioned processes regarding introduction of Lean Management methodology, which illustrates the problem of scepticism for new ideas of the people used to perform works and actions in traditional way. Using Lean Management philosophy in construction is a good idea to streamline processes in company, get rid of constantly recurring problems, and in this way improve the productivity and quality of executed activities. Performed analysis showed that different groups of people have very different idea and opinion on the problems connected with executing the same process - ground works and only having full picture of the situation (especially in construction processes) management can take proper problems-preventing actions that consequently can influence on the amount of waste generated on the construction cite which positively influence on the external environment.

Sociotechnical attributes of safe and unsafe work systems

PubMed Central

Kleiner, Brian M.; Hettinger, Lawrence J.; DeJoy, David M.; Huang, Yuang-Hsiang; Love, Peter E.D.

2015-01-01

Theoretical and practical approaches to safety based on sociotechnical systems principles place heavy emphasis on the intersections between social–organisational and technical–work process factors. Within this perspective, work system design emphasises factors such as the joint optimisation of social and technical processes, a focus on reliable human–system performance and safety metrics as design and analysis criteria, the maintenance of a realistic and consistent set of safety objectives and policies, and regular access to the expertise and input of workers. We discuss three current approaches to the analysis and design of complex sociotechnical systems: human–systems integration, macroergonomics and safety climate. Each approach emphasises key sociotechnical systems themes, and each prescribes a more holistic perspective on work systems than do traditional theories and methods. We contrast these perspectives with historical precedents such as system safety and traditional human factors and ergonomics, and describe potential future directions for their application in research and practice. Practitioner Summary: The identification of factors that can reliably distinguish between safe and unsafe work systems is an important concern for ergonomists and other safety professionals. This paper presents a variety of sociotechnical systems perspectives on intersections between social–organisational and technology–work process factors as they impact work system analysis, design and operation. PMID:25909756

A Latent Variable Analysis of Working Memory Capacity, Short-Term Memory Capacity, Processing Speed, and General Fluid Intelligence.

ERIC Educational Resources Information Center

Conway, Andrew R. A.; Cowan, Nelsin; Bunting, Michael F.; Therriault, David J.; Minkoff, Scott R. B.

2002-01-01

Studied the interrelationships among general fluid intelligence, short-term memory capacity, working memory capacity, and processing speed in 120 young adults and used structural equation modeling to determine the best predictor of general fluid intelligence. Results suggest that working memory capacity, but not short-term memory capacity or…

How work context affects operating room processes: using data mining and computer simulation to analyze facility and process design.

PubMed

Baumgart, André; Denz, Christof; Bender, Hans-Joachim; Schleppers, Alexander

2009-01-01

The complexity of the operating room (OR) requires that both structural (eg, department layout) and behavioral (eg, staff interactions) patterns of work be considered when developing quality improvement strategies. In our study, we investigated how these contextual factors influence outpatient OR processes and the quality of care delivered. The study setting was a German university-affiliated hospital performing approximately 6000 outpatient surgeries annually. During the 3-year-study period, the hospital significantly changed its outpatient OR facility layout from a decentralized (ie, ORs in adjacent areas of the building) to a centralized (ie, ORs in immediate vicinity of each other) design. To study the impact of the facility change on OR processes, we used a mixed methods approach, including process analysis, process modeling, and social network analysis of staff interactions. The change in facility layout was seen to influence OR processes in ways that could substantially affect patient outcomes. For example, we found a potential for more errors during handovers in the new centralized design due to greater interdependency between tasks and staff. Utilization of the mixed methods approach in our analysis, as compared with that of a single assessment method, enabled a deeper understanding of the OR work context and its influence on outpatient OR processes.

Statistical analysis of CCSN/SS7 traffic data from working CCS subnetworks

NASA Astrophysics Data System (ADS)

Duffy, Diane E.; McIntosh, Allen A.; Rosenstein, Mark; Willinger, Walter

1994-04-01

In this paper, we report on an ongoing statistical analysis of actual CCSN traffic data. The data consist of approximately 170 million signaling messages collected from a variety of different working CCS subnetworks. The key findings from our analysis concern: (1) the characteristics of both the telephone call arrival process and the signaling message arrival process; (2) the tail behavior of the call holding time distribution; and (3) the observed performance of the CCSN with respect to a variety of performance and reliability measurements.

The business process management software for successful quality management and organization: A case study from the University of Split School of Medicine.

PubMed

Sapunar, Damir; Grković, Ivica; Lukšić, Davor; Marušić, Matko

2016-05-01

Our aim was to describe a comprehensive model of internal quality management (QM) at a medical school founded on the business process analysis (BPA) software tool. BPA software tool was used as the core element for description of all working processes in our medical school, and subsequently the system served as the comprehensive model of internal QM. The quality management system at the University of Split School of Medicine included the documentation and analysis of all business processes within the School. The analysis revealed 80 weak points related to one or several business processes. A precise analysis of medical school business processes allows identification of unfinished, unclear and inadequate points in these processes, and subsequently the respective improvements and increase of the QM level and ultimately a rationalization of the institution's work. Our approach offers a potential reference model for development of common QM framework allowing a continuous quality control, i.e. the adjustments and adaptation to contemporary educational needs of medical students. Copyright © 2016 by Academy of Sciences and Arts of Bosnia and Herzegovina.

An Overview of Promising Grades of Tool Materials Based on the Analysis of their Physical-Mechanical Characteristics

NASA Astrophysics Data System (ADS)

Kudryashov, E. A.; Smirnov, I. M.; Grishin, D. V.; Khizhnyak, N. A.

2018-06-01

The work is aimed at selecting a promising grade of a tool material, whose physical-mechanical characteristics would allow using it for processing the surfaces of discontinuous parts in the presence of shock loads. An analysis of the physical-mechanical characteristics of most common tool materials is performed and the data on a possible provision of the metal-working processes with promising composite grades are presented.

Vygotsky's Analysis of Children's Meaning Making Processes

ERIC Educational Resources Information Center

Mahn, Holbrook

2012-01-01

Vygotsky's work is extensive and covers many aspects of the development of children's meaning-making processes in social and cultural contexts. However, his main focus is on the examination of the unification of speaking and thinking processes. His investigation centers on the analysis of the entity created by this unification--an internal…

The ergonomic process of an automotive company in Brazil: a study case.

PubMed

Bustos, Carolina; Fischer, Daniela; Ballardin, Lucimara; Nielsen, Rudolf

2012-01-01

The goal of this paper is to present the ergonomic process of an automotive company, whose focus is on the adaptation of the work conditions to the psychophysiological characteristics of its employees. The planning and the development of the ergonomic actions took place in three distinctive stages: ergonomic analysis of the work post (stage 1), ergonomic adaptations (stage 2) and Ergonomic Committee (stage 3). The activities started in June 2006 and have lasted to the current date, keeping a permanent improving process. The procedure adopted was based on the ergonomic analysis methodology proposed by Wisner (1994:1997) and the stages of the Ergonomic Analysis of Work presented in the 17 NR Regulatory Manual (MET, 2002). The paper's approach focused on the voluntary participation of workers from different areas and different hierarchical levels of the organization throughout all the stages of the process. The methodological procedures included descriptive research techniques, exploratory and qualitative research criteria, background and guidelines available in literature and legislation, as well as company information. Among the main results it can be mentioned the satisfaction of the employees regarding the appropriate work conditions, cultural and organizational changes and the creation of an Ergonomic Committee in the company.

Process analysis of trauma-focused cognitive behavioural therapy for individuals with schizophrenia.

PubMed

O'Driscoll, Ciarán; Mason, Oliver; Brady, Francesca; Smith, Ben; Steel, Craig

2016-06-01

Therapeutic alliance, modality, and ability to engage with the process of therapy have been the main focus of research into what makes psychotherapy successful. Individuals with complex trauma histories or schizophrenia are suggested to be more difficult to engage and may be less likely to benefit from therapy. This study aimed to track the in-session 'process' of working alliance and emotional processing of trauma memories for individuals with schizophrenia. The study utilized session recordings from the treatment arm of an open randomized clinical trial investigating trauma-focused cognitive behavioural therapy (TF-CBT) for individuals with schizophrenia (N = 26). Observer measures of working alliance, emotional processing, and affect arousal were rated at early and late phases of therapy. Correlation analysis was undertaken for process measures. Temporal analysis of expressed emotions was also reported. Working alliance was established and maintained throughout the therapy; however, agreement on goals reduced at the late phase. The participants appeared to be able to engage in emotional processing, but not to the required level for successful cognitive restructuring. This study undertook novel exploration of process variables not usually explored in CBT. It is also the first study of process for TF-CBT with individuals with schizophrenia. This complex clinical sample showed no difficulty in engagement; however, they may not be able to fully undertake the cognitive-emotional demands of this type of therapy. Clinical and research implications and potential limitations of these methods are considered. This sample showed no difficulties engaging with TF-CBT and forming a working alliance. However, the participants may not have achieved a level of active involvement required for successful cognitive restructuring of trauma memories. This discrepancy may relate to the mediating role of both working alliance and cognitive-emotional processing. The results underscore the importance of therapists understanding the relationship between alliance and other process factors which may be implicit in facilitating change. © 2015 The British Psychological Society.

Object Selection Costs in Visual Working Memory: A Diffusion Model Analysis of the Focus of Attention

ERIC Educational Resources Information Center

Sewell, David K.; Lilburn, Simon D.; Smith, Philip L.

2016-01-01

A central question in working memory research concerns the degree to which information in working memory is accessible to other cognitive processes (e.g., decision-making). Theories assuming that the focus of attention can only store a single object at a time require the focus to orient to a target representation before further processing can…

Increase in the thermodynamic efficiency of the working process of spark-ignited engines on natural gas with the addition of hydrogen

NASA Astrophysics Data System (ADS)

Mikhailovna Smolenskaya, Natalia; Vladimirovich Smolenskii, Victor; Vladimirovich Korneev, Nicholas

2018-02-01

The work is devoted to the substantiation and practical implementation of a new approach for estimating the change in internal energy by pressure and volume. The pressure is measured with a calibrated sensor. The change in volume inside the cylinder is determined by changing the position of the piston. The position of the piston is precisely determined by the angle of rotation of the crankshaft. On the basis of the proposed approach, the thermodynamic efficiency of the working process of spark ignition engines on natural gas with the addition of hydrogen was estimated. Experimental studies were carried out on a single-cylinder unit UIT-85. Their analysis showed an increase in the thermodynamic efficiency of the working process with the addition of hydrogen in a compressed natural gas (CNG).The results obtained make it possible to determine the characteristic of heat release from the analysis of experimental data. The effect of hydrogen addition on the CNG combustion process is estimated.

A Framework for Sentiment Analysis Implementation of Indonesian Language Tweet on Twitter

NASA Astrophysics Data System (ADS)

Asniar; Aditya, B. R.

2017-01-01

Sentiment analysis is the process of understanding, extracting, and processing the textual data automatically to obtain information. Sentiment analysis can be used to see opinion on an issue and identify a response to something. Millions of digital data are still not used to be able to provide any information that has usefulness, especially for government. Sentiment analysis in government is used to monitor the work programs of the government such as the Government of Bandung City through social media data. The analysis can be used quickly as a tool to see the public response to the work programs, so the next strategic steps can be taken. This paper adopts Support Vector Machine as a supervised algorithm for sentiment analysis. It presents a framework for sentiment analysis implementation of Indonesian language tweet on twitter for Work Programs of Government of Bandung City. The results of this paper can be a reference for decision making in local government.

Usability engineering: domain analysis activities for augmented-reality systems

NASA Astrophysics Data System (ADS)

Gabbard, Joseph; Swan, J. E., II; Hix, Deborah; Lanzagorta, Marco O.; Livingston, Mark; Brown, Dennis B.; Julier, Simon J.

2002-05-01

This paper discusses our usability engineering process for the Battlefield Augmented Reality System (BARS). Usability engineering is a structured, iterative, stepwise development process. Like the related disciplines of software and systems engineering, usability engineering is a combination of management principals and techniques, formal and semi- formal evaluation techniques, and computerized tools. BARS is an outdoor augmented reality system that displays heads- up battlefield intelligence information to a dismounted warrior. The paper discusses our general usability engineering process. We originally developed the process in the context of virtual reality applications, but in this work we are adapting the procedures to an augmented reality system. The focus of this paper is our work on domain analysis, the first activity of the usability engineering process. We describe our plans for and our progress to date on our domain analysis for BARS. We give results in terms of a specific urban battlefield use case we have designed.

A Conceptual Model for Analysing Collaborative Work and Products in Groupware Systems

NASA Astrophysics Data System (ADS)

Duque, Rafael; Bravo, Crescencio; Ortega, Manuel

Collaborative work using groupware systems is a dynamic process in which many tasks, in different application domains, are carried out. Currently, one of the biggest challenges in the field of CSCW (Computer-Supported Cooperative Work) research is to establish conceptual models which allow for the analysis of collaborative activities and their resulting products. In this article, we propose an ontology that conceptualizes the required elements which enable an analysis to infer a set of analysis indicators, thus evaluating both the individual and group work and the artefacts which are produced.

Visual analysis of trash bin processing on garbage trucks in low resolution video

NASA Astrophysics Data System (ADS)

Sidla, Oliver; Loibner, Gernot

2015-03-01

We present a system for trash can detection and counting from a camera which is mounted on a garbage collection truck. A working prototype has been successfully implemented and tested with several hours of real-world video. The detection pipeline consists of HOG detectors for two trash can sizes, and meanshift tracking and low level image processing for the analysis of the garbage disposal process. Considering the harsh environment and unfavorable imaging conditions, the process works already good enough so that very useful measurements from video data can be extracted. The false positive/false negative rate of the full processing pipeline is about 5-6% at fully automatic operation. Video data of a full day (about 8 hrs) can be processed in about 30 minutes on a standard PC.

Understanding Task-in-Process through the Lens of Laughter: Activity Designs, Instructional Materials, Learner Orientations, and Interpersonal Relationships

ERIC Educational Resources Information Center

Hasegawa, Atsushi

2018-01-01

Using the framework of conversation analysis, this study investigated the interactional workings of laughter in task-based interactions. The analysis was drawn from 160 cases of pair work interactions, collected in 2nd-semester Japanese-as-a-foreign-language classrooms. The pair work activities examined in this study are mostly grammar-focused,…

The Role of the Company in Generating Skills. The Learning Effects of Work Organization. The Netherlands.

ERIC Educational Resources Information Center

Onstenk, Jeroen; Voncken, Eva

The impact of developments in work organizations on the skilling process in the Netherlands was studied through a macro analysis of available statistical information about the development of education for work in the Netherlands and case studies of three Dutch firms. The macro analysis focused on the following: vocational education in the…

Taking care of you and care for others: an analysis of the activity of the work of technical and nursing assistants of a psychiatric institution for children and adolescents.

PubMed

Mendes, Davidson Passos; Moraes, Geraldo Fabiano de Souza; Mendes, Juliana Cristina de Lima

2012-01-01

Our objective in this study, the analysis of potential fields of risk management in nursing work in psychiatric care to adolescents and children, while settings that go from the relationship between technical and organizational determinants of work activity and the skills of operators. It was established focus on the work process of the Technical and Nursing Assistants to seek for response elements in an attempt to understand the health-disease process experienced by these workers. It was used for analysis and data collection, through the method of Ergonomic Work Analysis (EWA), fifteen workers of nursing staff - T&NA, between effectives and contractors, and the strategies of action and regulation of these workers in relation to the interface that they deal with. The results show that the workers are exposed to all charges in an intense and specific way, causing physical and mental wear, as it approaches the psychological distress, exposure to the psychic pressure, not only through contact with the object of work, but the complexity of these relationships that are involved in nursing staff.

Magazine Editors and the Writing Process: An Analysis of How Editors Work with Staff and Free-Lance Writers.

ERIC Educational Resources Information Center

Schierhorn, Ann B.; Endres, Kathleen L.

Editors of business and consumer magazines chosen by a random sample were asked in a mail survey what method they used in working with staff writers and free-lance writers. They were asked how they work with writers in the five stages of the writing process--idea, reporting, organizing, writing and rewriting. The first mailing to consumer…

Strategic and Market Analysis | Bioenergy | NREL

Science.gov Websites

recent efforts in comparative techno-economic analysis. Our analysis considers a wide range of conversion Intermediates NREL has developed first-of-its-kind process models and economic assessments of the co-processing work strives to understand the economic incentives, technical risks, and key data gaps that need to be

System Analysis in Instructional Programming: The Initial Phases of the Program Construction Process.

ERIC Educational Resources Information Center

Bjerstedt, Ake

A three-volume series describes the construction of a self-instructional system as a work process with three main phases: system analysis, system synthesis, and system modification and evaluation. After an introductory discussion of some basic principles of instructional programing, this first volume focuses on the system analysis phase,…

Variable mass pendulum behaviour processed by wavelet analysis

NASA Astrophysics Data System (ADS)

Caccamo, M. T.; Magazù, S.

2017-01-01

The present work highlights how, in order to characterize the motion of a variable mass pendulum, wavelet analysis can be an effective tool in furnishing information on the time evolution of the oscillation spectral content. In particular, the wavelet transform is applied to process the motion of a hung funnel that loses fine sand at an exponential rate; it is shown how, in contrast to the Fourier transform which furnishes only an average frequency value for the motion, the wavelet approach makes it possible to perform a joint time-frequency analysis. The work is addressed at undergraduate and graduate students.

An ergonomic analysis of work in the process of professional rehabilitation in Brazil.

PubMed

Cabral, A; Souza e Silva, M; Louzada, E; Cesar, W

2012-01-01

The purpose of this study is to describe the use of the Ergonomic Analysis of Work (EAW) in the process of rehabilitating workers, insured by the National Institute of Social Security (INSS) in Brazil, and to conduct a brief analysis of the instrument used by this body. Information obtained from EAW enabled the demand, the requirements of the activity and the skills needed to perform the tasks in the workplace to be determined, thus aiding the decision of the INSS as to rehabilitating the workers and their return to their jobs.

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH).

PubMed

García-Rojo, Marcial; Gonçalves, Luís; Blobel, Bernd

2012-01-01

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH) is a European COST Action that has been running from 2007 to 2011. COST Actions are funded by the COST (European Cooperation in the field of Scientific and Technical Research) Agency, supported by the Seventh Framework Programme for Research and Technological Development (FP7), of the European Union. EURO-TELEPATH's main objectives were evaluating and validating the common technological framework and communication standards required to access, transmit and manage digital medical records by pathologists and other medical professionals in a networked environment. The project was organized in four working groups. orking Group 1 "Business modeling in pathology" has designed main pathology processes - Frozen Study, Formalin Fixed Specimen Study, Telepathology, Cytology, and Autopsy -using Business Process Modeling Notation (BPMN). orking Group 2 "Informatics standards in pathology" has been dedicated to promoting the development and application of informatics standards in pathology, collaborating with Integrating the Healthcare Enterprise (IHE), Digital Imaging and Communications in Medicine (DICOM), Health Level Seven (HL7), and other standardization bodies. Working Group 3 "Images: Analysis, Processing, Retrieval and Management" worked on the use of virtual or digital slides that are fostering the use of image processing and analysis in pathology not only for research purposes, but also in daily practice. Working Group 4 "Technology and Automation in Pathology" was focused on studying the adequacy of current existing technical solutions, including, e.g., the quality of images obtained by slide scanners, or the efficiency of image analysis applications. Major outcome of this action are the collaboration with international health informatics standardization bodies to foster the development of standards for digital pathology, offering a new approach for workflow analysis, based in business process modeling. Health terminology standardization research has become a topic of high interest. Future research work should focus on standardization of automatic image analysis and tissue microarrays imaging.

Modelling and Simulation for Requirements Engineering and Options Analysis

DTIC Science & Technology

2010-05-01

should be performed to work successfully in the domain; and process-based techniques model the processes that occur in the work domain. There is a crisp ...acad/sed/sedres/ dm /erg/cwa. DRDC Toronto CR 2010-049 39 23. Can the current technique for developing simulation models for assessments

Thermodynamic and energy efficiency analysis of power generation from natural salinity gradients by pressure retarded osmosis.

PubMed

Yip, Ngai Yin; Elimelech, Menachem

2012-05-01

The Gibbs free energy of mixing dissipated when fresh river water flows into the sea can be harnessed for sustainable power generation. Pressure retarded osmosis (PRO) is one of the methods proposed to generate power from natural salinity gradients. In this study, we carry out a thermodynamic and energy efficiency analysis of PRO work extraction. First, we present a reversible thermodynamic model for PRO and verify that the theoretical maximum extractable work in a reversible PRO process is identical to the Gibbs free energy of mixing. Work extraction in an irreversible constant-pressure PRO process is then examined. We derive an expression for the maximum extractable work in a constant-pressure PRO process and show that it is less than the ideal work (i.e., Gibbs free energy of mixing) due to inefficiencies intrinsic to the process. These inherent inefficiencies are attributed to (i) frictional losses required to overcome hydraulic resistance and drive water permeation and (ii) unutilized energy due to the discontinuation of water permeation when the osmotic pressure difference becomes equal to the applied hydraulic pressure. The highest extractable work in constant-pressure PRO with a seawater draw solution and river water feed solution is 0.75 kWh/m(3) while the free energy of mixing is 0.81 kWh/m(3)-a thermodynamic extraction efficiency of 91.1%. Our analysis further reveals that the operational objective to achieve high power density in a practical PRO process is inconsistent with the goal of maximum energy extraction. This study demonstrates thermodynamic and energetic approaches for PRO and offers insights on actual energy accessible for utilization in PRO power generation through salinity gradients. © 2012 American Chemical Society

The Different Role of Working Memory in Open-Ended versus Closed-Ended Creative Problem Solving: A Dual-Process Theory Account

ERIC Educational Resources Information Center

Lin, Wei-Lun; Lien, Yunn-Wen

2013-01-01

This study examined how working memory plays different roles in open-ended versus closed-ended creative problem-solving processes, as represented by divergent thinking tests and insight problem-solving tasks. With respect to the analysis of different task demands and the framework of dual-process theories, the hypothesis was that the idea…

DEP : a computer program for evaluating lumber drying costs and investments

Treesearch

Stewart Holmes; George B. Harpole; Edward Bilek

1983-01-01

The DEP computer program is a modified discounted cash flow computer program designed for analysis of problems involving economic analysis of wood drying processes. Wood drying processes are different from other processes because of the large amounts of working capital required to finance inventories, and because of relatively large shares of costs charged to inventory...

Analysis of offshore platforms lifting with fixed pile structure type (fixed platform) based on ASD89

NASA Astrophysics Data System (ADS)

Sugianto, Agus; Indriani, Andi Marini

2017-11-01

Platform construction GTS (Gathering Testing Sattelite) is offshore construction platform with fix pile structure type/fixed platform functioning to support the mining of petroleum exploitation. After construction fabrication process platform was moved to barges, then shipped to the installation site. Moving process is generally done by pull or push based on construction design determined when planning. But at the time of lifting equipment/cranes available in the work area then the moving process can be done by lifting so that moving activity can be implemented more quickly of work. This analysis moving process of GTS platform in a different way that is generally done to GTS platform types by lifting using problem is construction reinforcement required, so the construction can be moved by lifting with analyzing and checking structure working stress that occurs due to construction moving process by lifting AISC code standard and analysis using the SAP2000 structure analysis program. The analysis result showed that existing condition cannot be moved by lifting because stress ratio is above maximum allowable value that is 0.950 (AISC-ASD89). Overstress occurs on the member 295 and 324 with stress ratio value 0.97 and 0.95 so that it is required structural reinforcement. Box plate aplication at both members so that it produces stress ratio values 0.78 at the member 295 and stress ratio of 0.77 at the member 324. These results indicate that the construction have qualified structural reinforcement for being moved by lifting.

Multifractal analysis of information processing in hippocampal neural ensembles during working memory under Δ9-tetrahydrocannabinol administration

PubMed Central

Fetterhoff, Dustin; Opris, Ioan; Simpson, Sean L.; Deadwyler, Sam A.; Hampson, Robert E.; Kraft, Robert A.

2014-01-01

Background Multifractal analysis quantifies the time-scale-invariant properties in data by describing the structure of variability over time. By applying this analysis to hippocampal interspike interval sequences recorded during performance of a working memory task, a measure of long-range temporal correlations and multifractal dynamics can reveal single neuron correlates of information processing. New method Wavelet leaders-based multifractal analysis (WLMA) was applied to hippocampal interspike intervals recorded during a working memory task. WLMA can be used to identify neurons likely to exhibit information processing relevant to operation of brain–computer interfaces and nonlinear neuronal models. Results Neurons involved in memory processing (“Functional Cell Types” or FCTs) showed a greater degree of multifractal firing properties than neurons without task-relevant firing characteristics. In addition, previously unidentified FCTs were revealed because multifractal analysis suggested further functional classification. The cannabinoid-type 1 receptor partial agonist, tetrahydrocannabinol (THC), selectively reduced multifractal dynamics in FCT neurons compared to non-FCT neurons. Comparison with existing methods WLMA is an objective tool for quantifying the memory-correlated complexity represented by FCTs that reveals additional information compared to classification of FCTs using traditional z-scores to identify neuronal correlates of behavioral events. Conclusion z-Score-based FCT classification provides limited information about the dynamical range of neuronal activity characterized by WLMA. Increased complexity, as measured with multifractal analysis, may be a marker of functional involvement in memory processing. The level of multifractal attributes can be used to differentially emphasize neural signals to improve computational models and algorithms underlying brain–computer interfaces. PMID:25086297

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elliott, C.

The Rocky Flats Environmental Technology Site (RFETS) has initiated a major work process improvement campaign using the tools of formalized benchmarking and streamlining. This paper provides insights into some of the process improvement activities performed at Rocky Flats from November 1995 through December 1996. It reviews the background, motivation, methodology, results, and lessons learned from this ongoing effort. The paper also presents important gains realized through process analysis and improvement including significant cost savings, productivity improvements, and an enhanced understanding of site work processes.

Interferometric analysis of polishing surface with a petal tool

NASA Astrophysics Data System (ADS)

Salas-Sánchez, Alfonso; Leal-Cabrera, Irce; Percino Zacarias, Elizabeth; Granados-Agustín, Fermín S.

2011-09-01

In this work, we describe a phase shift interferometric monitoring of polishing processes produced by a petal tool over a spherical surface to obtain a parabolic surface. In the process, we used a commercial polishing machine; the purpose of this work is to have control of polishing time. To achieve this analysis, we used a Fizeau interferometer of ZYGO Company for optical shop testing, and the Durango software from Diffraction International Company. For data acquisition, simulation and evaluation of optical surfaces, we start polishing process with a spherical surface with 15.46 cm of diameter; a 59.9 cm of radius curvature and, with f/# 1.9.

Inside the Black Box: Revealing the Process in Applying a Grounded Theory Analysis

ERIC Educational Resources Information Center

Rich, Peter

2012-01-01

Qualitative research methods have long set an example of rich description, in which data and researchers' hermeneutics work together to inform readers of findings in specific contexts. Among published works, insight into the analytical process is most often represented in the form of methodological propositions or research results. This paper…

Design and analysis of an adaptive lens that mimics the performance of the crystalline lens in the human eye

NASA Astrophysics Data System (ADS)

Santiago-Alvarado, Agustin; Cruz-Félix, Angel S.; Iturbide-Jiménez, F.; Martínez-López, M.; Ramírez-Como, M.; Armengol-Cruz, V.; Vásquez-Báez, I.

2014-09-01

Tunable lenses are optical systems that have attracted much attention due to their potential applications in such areas like ophthalmology, machine vision, microscopy and laser processing. In recent years we have been working in the analysis and performance of a liquid-filled variable focal length lens, this is a lens that can modify its focal length by changing the amount of water within it. Nowadays we extend our study to a particular adaptive lens known as solid elastic lens (SEL) that it is formed by an elastic main body made of Polydimethylsiloxane (PDMS Sylgard 184). In this work, we present the design, simulation and analysis of an adaptive solid elastic lens that in principle imitates the accommodation process of the crystalline lens in the human eye. For this work, we have adopted the parameters of the schematic eye model developed in 1985 by Navarro et al.; this model represents the anatomy of the eye as close as possible to reality by predicting an acceptable and accurate quantity of spherical and chromatic aberrations without any shape fitting. An opto-mechanical analysis of the accommodation process of the adaptive lens is presented, by simulating a certain amount of radial force applied onto the SEL using the finite element method with the commercial software SolidWorks®. We also present ray-trace diagrams of the simulated compression process of the adaptive lens using the commercial software OSLO®.

Unfolding the values of work - therapists´ experience of addressing the return to work process in occupational rehabilitation based on Acceptance and Commitment Therapy.

PubMed

Klevanger, Nina E; Fimland, Marius S; Johnsen, Roar; Rise, Marit B

2018-04-27

Facilitating return to work can be challenging due to the complexity of work disability. Few studies have examined rehabilitation programs based on Acceptance and Commitment Therapy that intend to support return to work, and none have investigated therapists' experience with providing such programs. The aim of this study was therefore to explore therapists' experience of addressing the return to work process in an inpatient occupational rehabilitation program based on Acceptance and Commitment Therapy. This was a qualitative interview study supported by participant observation. Therapists were interviewed regarding their experiences with addressing return to work in an inpatient occupational rehabilitation program based on Acceptance and Commitment Therapy. In addition, the rehabilitation program was investigated through participant observation. The interviews were analysed according to Interpretative Phenomenological Analysis and informed by an analysis of field notes from the participant observation. Acceptance and Commitment Therapy was experienced as a meaningful approach to facilitate return to work, as it allowed therapists to address all relevant aspects of the individual participant's life that might influence work participation. The therapists' twofold goal was to support participants in building both a meaningful life and sustainable work participation. To do so, they attempted to instil long-term and interrelated processes concerning ownership, causes of sick leave, relation to expectations, the values of work, and the scope of agency. Unfolding values connected to work participation might reconcile the tension between work and family life by integrating work with other areas of life. Providing work participation with personal meaning also seems especially commensurable with a context where economy presents a poor incentive for return to work. Therapists should, however, be attentive to the need to secure the prominence of return to work by relating participants' chosen themes explicitly to their return to work process. Therapists should also be aware of the dilemma that may arise when they attempt to refrain from providing advice while simultaneously encouraging actions they consider appropriate to facilitate sustainable work participation. In addition, having an individual-oriented approach to occupational rehabilitation may obscure the extent to which return to work is a multi-stakeholder process.

The social interaction of return to work explored from co-workers experiences.

PubMed

Tjulin, Åsa; MacEachen, Ellen; Stiwne, Elinor Edvardsson; Ekberg, Kerstin

2011-01-01

The objective was to explore the role and contribution of co-workers in the return-to-work process. The social interaction of co-workers in the return-to-work process are analysed within the framework of the Swedish national and local employer organisational return-to-work policies. An exploratory qualitative method was used, consisting of open-ended interviews with 33 workplace actors across seven work units. Organisational return-to-work policies were collected from the three public sector employers. The key findings that emerged during analysis showed that some co-workers have a more work-task oriented approach towards the return-to-work process, whilst others had a more social relational approach. In both situations, the social relations worked hand in hand with job tasks (how task were allocated, and how returning workers were supported by others) and could make or break the return-to-work process. A suggestion for improvement of return-to-work models and policies is the need to take into account the social relations amongst workplace actors, especially involving co-workers when planning for return-to-work interventions. Otherwise the proper attention to work arrangements, social communication and the role of co-workers in the return-to-work process might not be seen.

Model-based analysis of coupled equilibrium-kinetic processes: indirect kinetic studies of thermodynamic parameters using the dynamic data.

PubMed

Emami, Fereshteh; Maeder, Marcel; Abdollahi, Hamid

2015-05-07

Thermodynamic studies of equilibrium chemical reactions linked with kinetic procedures are mostly impossible by traditional approaches. In this work, the new concept of generalized kinetic study of thermodynamic parameters is introduced for dynamic data. The examples of equilibria intertwined with kinetic chemical mechanisms include molecular charge transfer complex formation reactions, pH-dependent degradation of chemical compounds and tautomerization kinetics in micellar solutions. Model-based global analysis with the possibility of calculating and embedding the equilibrium and kinetic parameters into the fitting algorithm has allowed the complete analysis of the complex reaction mechanisms. After the fitting process, the optimal equilibrium and kinetic parameters together with an estimate of their standard deviations have been obtained. This work opens up a promising new avenue for obtaining equilibrium constants through the kinetic data analysis for the kinetic reactions that involve equilibrium processes.

Radiography for intensive care: participatory process analysis in a PACS-equipped and film/screen environment

NASA Astrophysics Data System (ADS)

Peer, Regina; Peer, Siegfried; Sander, Heike; Marsolek, Ingo; Koller, Wolfgang; Pappert, Dirk; Hierholzer, Johannes

2002-05-01

If new technology is introduced into medical practice it must prove to make a difference. However traditional approaches of outcome analysis failed to show a direct benefit of PACS on patient care and economical benefits are still in debate. A participatory process analysis was performed to compare workflow in a film based hospital and a PACS environment. This included direct observation of work processes, interview of involved staff, structural analysis and discussion of observations with staff members. After definition of common structures strong and weak workflow steps were evaluated. With a common workflow structure in both hospitals, benefits of PACS were revealed in workflow steps related to image reporting with simultaneous image access for ICU-physicians and radiologists, archiving of images as well as image and report distribution. However PACS alone is not able to cover the complete process of 'radiography for intensive care' from ordering of an image till provision of the final product equals image + report. Interference of electronic workflow with analogue process steps such as paper based ordering reduces the potential benefits of PACS. In this regard workflow modeling proved to be very helpful for the evaluation of complex work processes linking radiology and the ICU.

Nuclear emergency management procedures in Europe

NASA Astrophysics Data System (ADS)

Carter, Emma

The Chernobyl accident brought to the fore the need for decision-making in nuclear emergency management to be transparent and consistent across Europe. A range of systems to support decision-making in future emergencies have since been developed, but, by and large, with little consultation with potential decision makers and limited understanding of the emergency management procedures across Europe and how they differ. In nuclear emergency management, coordination, communication and information sharing are of paramount importance. There are many key players with their own technical expertise, and several key activities occur in parallel, across different locations. Business process modelling can facilitate understanding through the representation of processes, aid transparency and structure the analysis, comparison and improvement of processes. This work has been conducted as part of a European Fifth Framework Programme project EVATECH, whose aim was to improve decision support methods, models and processes taking into account stakeholder expectations and concerns. It has involved the application of process modelling to document and compare the emergency management processes in four European countries. It has also involved a multidisciplinary approach taking a socio-technical perspective. The use of process modelling did indeed facilitate understanding and provided a common platform, which was not previously available, to consider emergency management processes. This thesis illustrates the structured analysis approach that process modelling enables. Firstly, through an individual analysis for the United Kingdom (UK) model that illustrated the potential benefits for a country. These are for training purposes, to build reflexive shared mental models, to aid coordination and for process improvement. Secondly, through a comparison of the processes in Belgium, Germany, Slovak Republic and the UK. In this comparison of the four processes we observed that the four process models are substantially different in their organisational structure and identified differences in the management of advice, where decisions are made and the communication network style. Another key aspect of this work is that through the structured analysis conducted we were able to develop a framework for the evaluation of DSS from the perspective of process. This work concludes reflecting on the challenges, which the European off-site nuclear emergency community face and suggest direction for future work, with particular reference to a recent conference on the capabilities and challenges of offsite nuclear emergency management, the Salzburg Symposium 2003.

Coal gasification systems engineering and analysis. Appendix A: Coal gasification catalog

NASA Technical Reports Server (NTRS)

1980-01-01

The scope of work in preparing the Coal Gasification Data Catalog included the following subtasks: (1) candidate system subsystem definition, (2) raw materials analysis, (3) market analysis for by-products, (4) alternate products analysis, (5) preliminary integrated facility requirements. Definition of candidate systems/subsystems includes the identity of and alternates for each process unit, raw material requirements, and the cost and design drivers for each process design.

Hierarchical Processing of Auditory Objects in Humans

PubMed Central

Kumar, Sukhbinder; Stephan, Klaas E; Warren, Jason D; Friston, Karl J; Griffiths, Timothy D

2007-01-01

This work examines the computational architecture used by the brain during the analysis of the spectral envelope of sounds, an important acoustic feature for defining auditory objects. Dynamic causal modelling and Bayesian model selection were used to evaluate a family of 16 network models explaining functional magnetic resonance imaging responses in the right temporal lobe during spectral envelope analysis. The models encode different hypotheses about the effective connectivity between Heschl's Gyrus (HG), containing the primary auditory cortex, planum temporale (PT), and superior temporal sulcus (STS), and the modulation of that coupling during spectral envelope analysis. In particular, we aimed to determine whether information processing during spectral envelope analysis takes place in a serial or parallel fashion. The analysis provides strong support for a serial architecture with connections from HG to PT and from PT to STS and an increase of the HG to PT connection during spectral envelope analysis. The work supports a computational model of auditory object processing, based on the abstraction of spectro-temporal “templates” in the PT before further analysis of the abstracted form in anterior temporal lobe areas. PMID:17542641

Beyond perceptual load and dilution: a review of the role of working memory in selective attention

PubMed Central

de Fockert, Jan W.

2013-01-01

The perceptual load and dilution models differ fundamentally in terms of the proposed mechanism underlying variation in distractibility during different perceptual conditions. However, both models predict that distracting information can be processed beyond perceptual processing under certain conditions, a prediction that is well-supported by the literature. Load theory proposes that in such cases, where perceptual task aspects do not allow for sufficient attentional selectivity, the maintenance of task-relevant processing depends on cognitive control mechanisms, including working memory. The key prediction is that working memory plays a role in keeping clear processing priorities in the face of potential distraction, and the evidence reviewed and evaluated in a meta-analysis here supports this claim, by showing that the processing of distracting information tends to be enhanced when load on a concurrent task of working memory is high. Low working memory capacity is similarly associated with greater distractor processing in selective attention, again suggesting that the unavailability of working memory during selective attention leads to an increase in distractibility. Together, these findings suggest that selective attention against distractors that are processed beyond perception depends on the availability of working memory. Possible mechanisms for the effects of working memory on selective attention are discussed. PMID:23734139

Beyond perceptual load and dilution: a review of the role of working memory in selective attention.

PubMed

de Fockert, Jan W

2013-01-01

The perceptual load and dilution models differ fundamentally in terms of the proposed mechanism underlying variation in distractibility during different perceptual conditions. However, both models predict that distracting information can be processed beyond perceptual processing under certain conditions, a prediction that is well-supported by the literature. Load theory proposes that in such cases, where perceptual task aspects do not allow for sufficient attentional selectivity, the maintenance of task-relevant processing depends on cognitive control mechanisms, including working memory. The key prediction is that working memory plays a role in keeping clear processing priorities in the face of potential distraction, and the evidence reviewed and evaluated in a meta-analysis here supports this claim, by showing that the processing of distracting information tends to be enhanced when load on a concurrent task of working memory is high. Low working memory capacity is similarly associated with greater distractor processing in selective attention, again suggesting that the unavailability of working memory during selective attention leads to an increase in distractibility. Together, these findings suggest that selective attention against distractors that are processed beyond perception depends on the availability of working memory. Possible mechanisms for the effects of working memory on selective attention are discussed.

ARBAN-A new method for analysis of ergonomic effort.

PubMed

Holzmann, P

1982-06-01

ARBAN is a method for the ergonomic analysis of work, including work situations which involve widely differing body postures and loads. The idea of the method is thal all phases of the analysis process that imply specific knowledge on ergonomics are teken over by filming equipment and a computer routine. All tasks that must be carried out by the investigator in the process of analysis are so designed that they appear as evident by the use of systematic common sense. The ARBAN analysis method contains four steps: 1. Recording of the workplace situation on video or film. 2. Coding the posture and load situation at a number of closely spaced 'frozen' situations. 3. Computerisation. 4. Evaluation of the results. The computer calculates figures for the total ergonomic stress on the whole body as well as on different parts of the body separately. They are presented as 'Ergonomic stress/ time curves', where the heavy load situations occur as peaks of the curve. The work cycle may also be divided into different tasks, where the stress and duration patterns can be compared. The integral of the curves are calculated for single-figure comparison of different tasks as well as different work situations.

Family Mastery Enhances Work Engagement in Chinese Nurses: A Cross-Lagged Analysis

ERIC Educational Resources Information Center

Lu, Chang-qin; Siu, Oi-ling; Chen, Wei-qing; Wang, Hai-jiang

2011-01-01

Based on Greenhaus and Powell's (2006) theory of work-family enrichment and the job demands-resources (JD-R) model of work engagement (Bakker & Demerouti, 2008), this study focused on the family-to-work enrichment process by investigating the effect of family mastery on work engagement in a Chinese context. A sample of 279 Chinese female…

NASA Supportability Engineering Implementation Utilizing DoD Practices and Processes

NASA Technical Reports Server (NTRS)

Smith, David A.; Smith, John V.

2010-01-01

The Ares I design and development program made the determination early in the System Design Review Phase to utilize DoD ILS and LSA approach for supportability engineering as an integral part of the system engineering process. This paper is to provide a review of the overall approach to design Ares-I with an emphasis on a more affordable, supportable, and sustainable launch vehicle. Discussions will include the requirements development, design influence, support concept alternatives, ILS and LSA planning, Logistics support analyses/trades performed, LSA tailoring for NASA Ares Program, support system infrastructure identification, ILS Design Review documentation, Working Group coordination, and overall ILS implementation. At the outset, the Ares I Project initiated the development of the Integrated Logistics Support Plan (ILSP) and a Logistics Support Analysis process to provide a path forward for the management of the Ares-I ILS program and supportability analysis activities. The ILSP provide the initial planning and coordination between the Ares-I Project Elements and Ground Operation Project. The LSA process provided a system engineering approach in the development of the Ares-I supportability requirements; influence the design for supportability and development of alternative support concepts that satisfies the program operability requirements. The LSA planning and analysis results are documented in the Logistics Support Analysis Report. This document was required during the Ares-I System Design Review (SDR) and Preliminary Design Review (PDR) review cycles. To help coordinate the LSA process across the Ares-I project and between programs, the LSA Report is updated and released quarterly. A System Requirement Analysis was performed to determine the supportability requirements and technical performance measurements (TPMs). Two working groups were established to provide support in the management and implement the Ares-I ILS program, the Integrated Logistics Support Working Group (ILSWG) and the Logistics Support Analysis Record Working Group (LSARWG). The Ares I ILSWG is established to assess the requirements and conduct, evaluate analyses and trade studies associated with acquisition logistic and supportability processes and to resolve Ares I integrated logistics and supportability issues. It established a strategic collaborative alliance for coordination of Logistics Support Analysis activates in support of the integrated Ares I vehicle design and development of logistics support infrastructure. A Joint Ares I - Orion LSAR Working Group was established to: 1) Guide the development of Ares-I and Orion LSAR data and serve as a model for future Constellation programs, 2) Develop rules and assumptions that will apply across the Constellation program with regards to the program's LSAR development, and 3) Maintain the Constellation LSAR Style Guide.

Physical explosion analysis in heat exchanger network design

NASA Astrophysics Data System (ADS)

Pasha, M.; Zaini, D.; Shariff, A. M.

2016-06-01

The failure of shell and tube heat exchangers is being extensively experienced by the chemical process industries. This failure can create a loss of production for long time duration. Moreover, loss of containment through heat exchanger could potentially lead to a credible event such as fire, explosion and toxic release. There is a need to analyse the possible worst case effect originated from the loss of containment of the heat exchanger at the early design stage. Physical explosion analysis during the heat exchanger network design is presented in this work. Baker and Prugh explosion models are deployed for assessing the explosion effect. Microsoft Excel integrated with process design simulator through object linking and embedded (OLE) automation for this analysis. Aspen HYSYS V (8.0) used as a simulation platform in this work. A typical heat exchanger network of steam reforming and shift conversion process was presented as a case study. It is investigated from this analysis that overpressure generated from the physical explosion of each heat exchanger can be estimated in a more precise manner by using Prugh model. The present work could potentially assist the design engineer to identify the critical heat exchanger in the network at the preliminary design stage.

40 CFR 133.105 - Treatment equivalent to secondary treatment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... through proper operation and maintenance of the treatment works, based on an analysis of the past... treatment works, considering the design capability of the treatment process and geographical and climatic...

From the past to the future: Integrating work experience into the design process.

PubMed

Bittencourt, João Marcos; Duarte, Francisco; Béguin, Pascal

2017-01-01

Integrating work activity issues into design process is a broadly discussed theme in ergonomics. Participation is presented as the main means for such integration. However, a late participation can limit the development of both project solutions and future work activity. This article presents the concept of construction of experience aiming at the articulated development of future activities and project solutions. It is a non-teleological approach where the initial concepts will be transformed by the experience built up throughout the design process. The method applied was a case study of an ergonomic participation during the design of a new laboratory complex for biotechnology research. Data was obtained through analysis of records in a simulation process using a Lego scale model and interviews with project participants. The simulation process allowed for developing new ways of working and generating changes in the initial design solutions, which enable workers to adopt their own developed strategies for conducting work more safely and efficiently in the future work system. Each project decision either opens or closes a window of opportunities for developing a future activity. Construction of experience in a non-teleological design process allows for understanding the consequences of project solutions for future work.

Rhythms of life: antecedents and outcomes of work-family balance in employed parents.

PubMed

Aryee, Samuel; Srinivas, E S; Tan, Hwee Hoon

2005-01-01

This study examined antecedents and outcomes of a fourfold taxonomy of work-family balance in terms of the direction of influence (work-family vs. family-work) and type of effect (conflict vs. facilitation). Respondents were full-time employed parents in India. Confirmatory factor analysis results provided evidence for the discriminant validity of M. R. Frone's (2003) fourfold taxonomy of work-family balance. Results of moderated regression analysis revealed that different processes underlie the conflict and facilitation components. Furthermore, gender had only a limited moderating influence on the relationships between the antecedents and the components of work-family balance. Last, work-family facilitation was related to the work outcomes of job satisfaction and organizational commitment.

Margin of manoeuvre indicators in the workplace during the rehabilitation process: a qualitative analysis.

PubMed

Durand, M J; Vézina, N; Baril, R; Loisel, P; Richard, M C; Ngomo, S

2009-06-01

The task of evaluating workers' capacity to return to their pre-injury employment or other jobs continues to pose a daily challenge for clinicians. In this study, a concept frequently used in the field of ergonomics, the margin of manoeuvre (MM), was applied during the rehabilitation process. The study identified the indicators of the MM taken into account during the return to work of workers with musculoskeletal disorders. This study used a multiple-case design. A case was defined as a dyad comprising a worker admitted to a work rehabilitation program and the clinician who was managing the return-to-work process. The results were then validated with investigators and expert ergonomists, through group interviews. Content analyses were performed using the conceptual framework for the work activity model adapted from Vézina and the procedures recommended by Miles and Huberman. A total of 11 workers, five clinicians, two experts and two investigators participated in this study. The interview analysis process resulted in a more detailed definition of the MM and the identification of 50 indicators. The indicators were classified according to six dimensions: (1) work context; (2) employer's requirements and expectations; (3) means and tools; (4) worker's personal parameters; (5) work activity; and (6) impacts of the work situation. The more specific indicators identified in this study will allow for more systematic observation of the MM. Subsequent studies will seek to link each indicator described in the model with a specific method of observation.

Practitioner Action Research on Writing Center Tutor Training: Critical Discourse Analysis of Reflections on Video-Recorded Sessions

ERIC Educational Resources Information Center

Pigliacelli, Mary

2017-01-01

Training writing center tutors to work collaboratively with students on their writing is a complex and challenging process. This practitioner action research uses critical discourse analysis (Gee, 2014a) to interrogate tutors' understandings of their work, as expressed in their written reflections on video-recorded tutoring sessions, to facilitate…

The Role of the Company in Generating Skills. The Learning Effects of Work Organization. Denmark.

ERIC Educational Resources Information Center

Kristensen, Peer Hull; Petersen, James Hopner

The impact of developments in work organizations on the skilling process in Denmark was studied through a macro analysis of available statistical information about the development of workplace training in Denmark and case studies of three Danish firms. The macro analysis focused on the following: Denmark's vocational training system; the Danish…

Processing Speed, Inhibitory Control, and Working Memory: Three Important Factors to Account for Age-Related Cognitive Decline

ERIC Educational Resources Information Center

Pereiro Rozas, Arturo X.; Juncos-Rabadan, Onesimo; Gonzalez, Maria Soledad Rodriguez

2008-01-01

Processing speed, inhibitory control and working memory have been identified as the main possible culprits of age-related cognitive decline. This article describes a study of their interrelationships and dependence on age, including exploration of whether any of them mediates between age and the others. We carried out a LISREL analysis of the…

Human Error Analysis in a Permit to Work System: A Case Study in a Chemical Plant

PubMed Central

Jahangiri, Mehdi; Hoboubi, Naser; Rostamabadi, Akbar; Keshavarzi, Sareh; Hosseini, Ali Akbar

2015-01-01

Background A permit to work (PTW) is a formal written system to control certain types of work which are identified as potentially hazardous. However, human error in PTW processes can lead to an accident. Methods This cross-sectional, descriptive study was conducted to estimate the probability of human errors in PTW processes in a chemical plant in Iran. In the first stage, through interviewing the personnel and studying the procedure in the plant, the PTW process was analyzed using the hierarchical task analysis technique. In doing so, PTW was considered as a goal and detailed tasks to achieve the goal were analyzed. In the next step, the standardized plant analysis risk-human (SPAR-H) reliability analysis method was applied for estimation of human error probability. Results The mean probability of human error in the PTW system was estimated to be 0.11. The highest probability of human error in the PTW process was related to flammable gas testing (50.7%). Conclusion The SPAR-H method applied in this study could analyze and quantify the potential human errors and extract the required measures for reducing the error probabilities in PTW system. Some suggestions to reduce the likelihood of errors, especially in the field of modifying the performance shaping factors and dependencies among tasks are provided. PMID:27014485

Return-to-work success despite conflicts: an exploration of decision-making during a work rehabilitation program.

PubMed

Gouin, Marie-Michelle; Coutu, Marie-France; Durand, Marie-José

2017-11-12

Collective decision-making by stakeholders appears important to return-to-work success, yet few studies have explored the processes involved. This study aims to explore the influence of decision-making on return-to-work for workers with musculoskeletal or common mental disorders. This study is a secondary analysis using data from three earlier multiple-case studies that documented decision-making during similar and comparable work rehabilitation programs. Individual interviews were conducted at the end of the program with stakeholders, namely, the disabled workers and representatives of health care professionals, employers, unions and insurers. Verbatims were analysed inductively. The 28 decision-making processes (cases) led to 115 different decisions-making instances and included the following components: subjects of the decisions, stakeholders' concerns and powers, and types of decision-making. No differences were found in decision-making processes relative to the workers' diagnoses or return-to-work status. However, overall analysis of decision-making revealed that stakeholder agreement on a return-to-work goal and acceptance of an intervention plan in which the task demands aligned with the worker's capacities were essential for return-to-work success. These results support the possibility of return-to-work success despite conflictual decision-making processes. In addition to facilitating consensual decisions, future studies should be aimed at facilitating negotiated decisions. Implications for rehabilitation Facilitating decision-making, with the aim of obtaining agreement from all stakeholders on a return-to-work goal and their acceptance of an intervention plan that respects the worker's capacities, is important for return-to-work success. Rehabilitation professionals should constantly be on the lookout for potential conflicts, which may either complicate the reach of an agreement between the stakeholders or constrain return-to-work possibilities. Rehabilitation professionals should also be constantly watching for workers' and employers' return-to-work concerns, as they may change during work rehabilitation, potentially challenging a reached agreement.

Job Performance as Multivariate Dynamic Criteria: Experience Sampling and Multiway Component Analysis.

PubMed

Spain, Seth M; Miner, Andrew G; Kroonenberg, Pieter M; Drasgow, Fritz

2010-08-06

Questions about the dynamic processes that drive behavior at work have been the focus of increasing attention in recent years. Models describing behavior at work and research on momentary behavior indicate that substantial variation exists within individuals. This article examines the rationale behind this body of work and explores a method of analyzing momentary work behavior using experience sampling methods. The article also examines a previously unused set of methods for analyzing data produced by experience sampling. These methods are known collectively as multiway component analysis. Two archetypal techniques of multimode factor analysis, the Parallel factor analysis and the Tucker3 models, are used to analyze data from Miner, Glomb, and Hulin's (2010) experience sampling study of work behavior. The efficacy of these techniques for analyzing experience sampling data is discussed as are the substantive multimode component models obtained.

Research on the use of space resources

NASA Technical Reports Server (NTRS)

Carroll, W. F. (Editor)

1983-01-01

The second year of a multiyear research program on the processing and use of extraterrestrial resources is covered. The research tasks included: (1) silicate processing, (2) magma electrolysis, (3) vapor phase reduction, and (4) metals separation. Concomitant studies included: (1) energy systems, (2) transportation systems, (3) utilization analysis, and (4) resource exploration missions. Emphasis in fiscal year 1982 was placed on the magma electrolysis and vapor phase reduction processes (both analytical and experimental) for separation of oxygen and metals from lunar regolith. The early experimental work on magma electrolysis resulted in gram quantities of iron (mixed metals) and the identification of significant anode, cathode, and container problems. In the vapor phase reduction tasks a detailed analysis of various process concepts led to the selection of two specific processes designated as ""Vapor Separation'' and ""Selective Ionization.'' Experimental work was deferred to fiscal year 1983. In the Silicate Processing task a thermophysical model of the casting process was developed and used to study the effect of variations in material properties on the cooling behavior of lunar basalt.

The Event-Related Brain Potential as an Index of Information Processing and Cognitive Activity: A Program of Basic Research.

DTIC Science & Technology

1988-02-29

reciprocity: An event- related brain potentials analysis. Acta Psychologica. Submitted for publication. 21. Stolar, N., Sparenborg, S., Donchin, E...in press) argued that it is a manifestation of a process related to the updating of models of the environment or context in working memory. Such an...suggemng " ees ud e may involve working memory, but they do am hold any privileged relation to working memory.u However, he immedi- ately proceeds to narrow

Examining Cybersecurity of Cyberphysical Systems for Critical Infrastructures Through Work Domain Analysis.

PubMed

Wang, Hao; Lau, Nathan; Gerdes, Ryan M

2018-04-01

The aim of this study was to apply work domain analysis for cybersecurity assessment and design of supervisory control and data acquisition (SCADA) systems. Adoption of information and communication technology in cyberphysical systems (CPSs) for critical infrastructures enables automated and distributed control but introduces cybersecurity risk. Many CPSs employ SCADA industrial control systems that have become the target of cyberattacks, which inflict physical damage without use of force. Given that absolute security is not feasible for complex systems, cyberintrusions that introduce unanticipated events will occur; a proper response will in turn require human adaptive ability. Therefore, analysis techniques that can support security assessment and human factors engineering are invaluable for defending CPSs. We conducted work domain analysis using the abstraction hierarchy (AH) to model a generic SCADA implementation to identify the functional structures and means-ends relations. We then adopted a case study approach examining the Stuxnet cyberattack by developing and integrating AHs for the uranium enrichment process, SCADA implementation, and malware to investigate the interactions between the three aspects of cybersecurity in CPSs. The AHs for modeling a generic SCADA implementation and studying the Stuxnet cyberattack are useful for mapping attack vectors, identifying deficiencies in security processes and features, and evaluating proposed security solutions with respect to system objectives. Work domain analysis is an effective analytical method for studying cybersecurity of CPSs for critical infrastructures in a psychologically relevant manner. Work domain analysis should be applied to assess cybersecurity risk and inform engineering and user interface design.

Book: Marine Bioacoustic Signal Processing and Analysis

DTIC Science & Technology

2011-09-30

physicists , and mathematicians . However, more and more biologists and psychologists are starting to use advanced signal processing techniques and...Book: Marine Bioacoustic Signal Processing and Analysis 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT ...chapters than it should be, since the project must be finished by Dec. 31. I have started setting aside 2 hours of uninterrupted per workday to work

The role of speed versus working memory in predicting learning new information in multiple sclerosis.

PubMed

Chiaravalloti, Nancy D; Stojanovic-Radic, Jelena; DeLuca, John

2013-01-01

The most common cognitive impairments in multiple sclerosis (MS) have been documented in specific domains, including new learning and memory, working memory, and information processing speed. However, little attempt has been made to increase our understanding of their relationship to one another. While recent studies have shown that processing speed impacts new learning and memory abilities in MS, the role of working memory in this relationship has received less attention. The present study examines the relative contribution of impaired working memory versus processing speed in new learning and memory functions in MS. Participants consisted of 51 individuals with clinically definite MS. Participants completed two measures of processing speed, two measures of working memory, and two measures of episodic memory. Data were analyzed via correlational and multiple regression analysis. Results indicate that the variance in new learning abilities in this sample was primarily associated with processing speed, with working memory exerting much less of an influence. Results are discussed in terms of the role of cognitive rehabilitation of new learning and memory abilities in persons with MS.

Optimization of Dimensional accuracy in plasma arc cutting process employing parametric modelling approach

NASA Astrophysics Data System (ADS)

Naik, Deepak kumar; Maity, K. P.

2018-03-01

Plasma arc cutting (PAC) is a high temperature thermal cutting process employed for the cutting of extensively high strength material which are difficult to cut through any other manufacturing process. This process involves high energized plasma arc to cut any conducting material with better dimensional accuracy in lesser time. This research work presents the effect of process parameter on to the dimensional accuracy of PAC process. The input process parameters were selected as arc voltage, standoff distance and cutting speed. A rectangular plate of 304L stainless steel of 10 mm thickness was taken for the experiment as a workpiece. Stainless steel is very extensively used material in manufacturing industries. Linear dimension were measured following Taguchi’s L16 orthogonal array design approach. Three levels were selected to conduct the experiment for each of the process parameter. In all experiments, clockwise cut direction was followed. The result obtained thorough measurement is further analyzed. Analysis of variance (ANOVA) and Analysis of means (ANOM) were performed to evaluate the effect of each process parameter. ANOVA analysis reveals the effect of input process parameter upon leaner dimension in X axis. The results of the work shows that the optimal setting of process parameter values for the leaner dimension on the X axis. The result of the investigations clearly show that the specific range of input process parameter achieved the improved machinability.

The N2N instrument to evaluate healthy work environments: an Italian validation.

PubMed

Palese, Alvisa; Dante, Angelo; Tonzar, Laura; Balboni, Bernardo

2014-02-01

The aims of the study were to (a) validate N2N Healthy Work Environment tool, (b) assess the healthiness of work environments as perceived by nurses themselves and (c) identify the factors associated with Italian nurses' perception of work environment healthiness. The linguistic and cultural adaptation of USA-N2N Healthy Work Environments was achieved through a process of forward/backward translation. Content validity was assessed by three expert nurses. The stability of the instrument was checked with a test/retest evaluation. The instrument psychometric properties, the confirmatory factor analysis as well the healthiness of the work environment and its determinant factors were evaluated with a sample of 294 nurses. The content and face validity of the N2N Healthy Work Environment instrument was confirmed. The instrument demonstrated good internal consistency (α of 0.82), excellent stability values (ρ > 0.70) and high levels of acceptability (response rate: 96.4 %). The confirmatory factor analysis has corroborated the existence of two factors as documented in the original instrument (Mays et al. in J Nurs Manag 19:18-26, 2011). Eighty-seven (29.6 %) nurses perceived the work environment where they work as "healthy". Working under a functional model of care delivery (χ(2) 24.856, p 0.000) and being responsible for one project or more (χ(2) 5.256, p 0.021) were associated with healthy environments. The instrument--valid and reliable, short in the number of items, easy to understand and based on international standards--allows a systematic assessment of the healthiness of the environment and might provide not only the opportunity to evaluate the effects of new organizational models and interventions, but also the possibility to activate a process of self-analysis and a process of ongoing review. The instrument can be used to systematically check the healthiness of Italian working environments, allowing for organizational diagnosis, targeted interventions and international comparisons.

POLLUTION PREVENTION IN THE DESIGN OF CHEMICAL PROCESSES USING HIERARCHICAL DESIGN AND SIMULATION

EPA Science Inventory

The design of chemical processes is normally an interactive process of synthesis and analysis. When one also desires or needs to limit the amount of pollution generated by the process the difficulty of the task can increase substantially. In this work, we show how combining hier...

ARC-1966-A-37949-4

NASA Image and Video Library

1966-11-29

MR. J. WARFEL, D. TRACEY, T. BROWNE, D. KLAUK, MRS L. McCORMICK, C. BATINOVICH, WORKING IN THE DATA ANALYSIS MANAGEMENT AREA OF THE PIONEER TAPE PROCESSING STATION. Pioneer Off-Line Data Processing System.

Biometric Attendance and Big Data Analysis for Optimizing Work Processes.

PubMed

Verma, Neetu; Xavier, Teenu; Agrawal, Deepak

2016-01-01

Although biometric attendance management is available, large healthcare organizations have difficulty in big data analysis for optimization of work processes. The aim of this project was to assess the implementation of a biometric attendance system and its utility following big data analysis. In this prospective study the implementation of biometric system was evaluated over 3 month period at our institution. Software integration with other existing systems for data analysis was also evaluated. Implementation of the biometric system could be successfully done over a two month period with enrollment of 10,000 employees into the system. However generating reports and taking action this large number of staff was a challenge. For this purpose software was made for capturing the duty roster of each employee and integrating it with the biometric system and adding an SMS gateway. This helped in automating the process of sending SMSs to each employee who had not signed in. Standalone biometric systems have limited functionality in large organizations unless it is meshed with employee duty roster.

An analysis of hydrogen production via closed-cycle schemes. [thermochemical processings from water

NASA Technical Reports Server (NTRS)

Chao, R. E.; Cox, K. E.

1975-01-01

A thermodynamic analysis and state-of-the-art review of three basic schemes for production of hydrogen from water: electrolysis, thermal water-splitting, and multi-step thermochemical closed cycles is presented. Criteria for work-saving thermochemical closed-cycle processes are established, and several schemes are reviewed in light of such criteria. An economic analysis is also presented in the context of energy costs.

A Comparative Analysis of Transitions from Education to Work in Europe (CATEWE). Final Report [and] Annex to the Final Report.

ERIC Educational Resources Information Center

Smyth, Emer; Gangl, Markus; Raffe, David; Hannan, Damian F.; McCoy, Selina

This project aimed to develop a more comprehensive conceptual framework of school-to-work transitions in different national contexts and apply this framework to the empirical analysis of transition processes across European countries. It drew on these two data sources: European Community Labor Force Survey and integrated databases on national…

Employees' Willingness to Participate in Work-Related Learning: A Multilevel Analysis of Employees' Learning Intentions

ERIC Educational Resources Information Center

Kyndt, Eva; Onghena, Patrick; Smet, Kelly; Dochy, Filip

2014-01-01

The current study focuses on employees' learning intentions, or the willingness to undertake formal work-related learning. This cross-sectional survey study included a sample of 1,243 employees that are nested within 21 organisations. The results of the multilevel analysis show that self-directedness in career processes, time management,…

Initiating an ergonomic analysis. A process for jobs with highly variable tasks.

PubMed

Conrad, K M; Lavender, S A; Reichelt, P A; Meyer, F T

2000-09-01

Occupational health nurses play a vital role in addressing ergonomic problems in the workplace. Describing and documenting exposure to ergonomic risk factors is a relatively straightforward process in jobs in which the work is repetitive. In other types of work, the analysis becomes much more challenging because tasks may be repeated infrequently, or at irregular time intervals, or under different environmental and temporal conditions, thereby making it difficult to observe a "representative" sample of the work performed. This article describes a process used to identify highly variable job tasks for ergonomic analyses. The identification of tasks for ergonomic analysis was a two step process involving interviews and a survey of firefighters and paramedics from a consortium of 14 suburban fire departments. The interviews were used to generate a list of frequently performed, physically strenuous job tasks and to capture clear descriptions of those tasks and associated roles. The goals of the survey were to confirm the interview findings across the entire target population and to quantify the frequency and degree of strenuousness of each task. In turn, the quantitative results from the survey were used to prioritize job tasks for simulation. Although this process was used to study firefighters and paramedics, the approach is likely to be suitable for many other types of occupations in which the tasks are highly variable in content and irregular in frequency.

Utilization of a Multi-Disciplinary Approach to Building Effective Command Centers: Process and Products

DTIC Science & Technology

2005-06-01

cognitive task analysis , organizational information dissemination and interaction, systems engineering, collaboration and communications processes, decision-making processes, and data collection and organization. By blending these diverse disciplines command centers can be designed to support decision-making, cognitive analysis, information technology, and the human factors engineering aspects of Command and Control (C2). This model can then be used as a baseline when dealing with work in areas of business processes, workflow engineering, information management,

Rapid process development of chromatographic process using direct analysis in real time mass spectrometry as a process analytical technology tool.

PubMed

Yan, Binjun; Chen, Teng; Xu, Zhilin; Qu, Haibin

2014-06-01

The concept of quality by design (QbD) is widely applied in the process development of pharmaceuticals. However, the additional cost and time have caused some resistance about QbD implementation. To show a possible solution, this work proposed a rapid process development method, which used direct analysis in real time mass spectrometry (DART-MS) as a process analytical technology (PAT) tool for studying the chromatographic process of Ginkgo biloba L., as an example. The breakthrough curves were fast determined by DART-MS at-line. A high correlation coefficient of 0.9520 was found between the concentrations of ginkgolide A determined by DART-MS and HPLC. Based on the PAT tool, the impacts of process parameters on the adsorption capacity were discovered rapidly, which showed a decreased adsorption capacity with the increase of the flow rate. This work has shown the feasibility and advantages of integrating PAT into QbD implementation for rapid process development. Copyright © 2014 Elsevier B.V. All rights reserved.

Parallel versus Serial Processing Dependencies in the Perisylvian Speech Network: A Granger Analysis of Intracranial EEG Data

ERIC Educational Resources Information Center

Gow, David W., Jr.; Keller, Corey J.; Eskandar, Emad; Meng, Nate; Cash, Sydney S.

2009-01-01

In this work, we apply Granger causality analysis to high spatiotemporal resolution intracranial EEG (iEEG) data to examine how different components of the left perisylvian language network interact during spoken language perception. The specific focus is on the characterization of serial versus parallel processing dependencies in the dominant…

Working capital management in the process of financial support of investment and construction projects and of the construction material industry

NASA Astrophysics Data System (ADS)

Danilochkina, Nadezhda; Lukmanova, Inessa; Roshchina, Olga; Voytolovskiy, Nikolay

2018-03-01

The article presents the analysis of working capital in the process of financial support of high-rise construction investment projects. The factors influencing the choice of the working capital management model were analyzed, the reasons of the change in the requirement for the values of current assets in the process of construction of high-rise facilities were determined. The author has developed the scheme of interrelation between production, operational and financial activity cycles of enterprises implementing investment projects of unique buildings and structures and made a comparative description of their financing sources.

Perceptions of Breast Cancer Survivors on the Supporting Practices of Their Supervisors in the Return-to-Work Process: A Qualitative Descriptive Study.

PubMed

Caron, Maryse; Durand, Marie-José; Tremblay, Dominique

2018-03-01

Purpose Supervisors are known to be key actors in ensuring the success of absent employees in their return-to-work process. However, to date, little is known about the perceptions of breast cancer survivors on the practices put in place by their supervisors to support them during this process. The objective of this study was to describe the perceptions of breast cancer survivors on the practices put in place by their supervisors to support them during their return-to-work process. Method A qualitative descriptive study was conducted. Semi-structured interviews were carried out with breast cancer survivors (n = 10) who had returned to work after treatment and were still at work more than 18 months later. Each interview was audio recorded and then transcribed verbatim for qualitative thematic content analysis using a semi-open codification framework. Results Participants identified three main practices put in place by their supervisors to support them and which they perceived as particularly helpful during the return-to-work process: (1) maintaining communication during their period of absence; (2) working with them to structure their return-to-work process before their actual return; and (3) allowing them flexibility in their schedule for a certain period, particularly at the beginning of the return-to-work process. Breast cancer survivors also identified an omission in the practice of employers: lack of follow-up over time. Conclusion Knowledge about the practices perceived as helpful by breast cancer survivors during their return-to-work process lays the groundwork for the eventual development of services to help breast cancer survivors in their return to work.

Working and Learning in a Field Excursion.

PubMed

Hole, Torstein Nielsen

2018-06-01

This study aimed to discern sociocultural processes through which students learn in field excursions. To achieve this aim, short-term ethnographic techniques were employed to examine how undergraduate students work and enact knowledge (or knowing) during a specific field excursion in biology. The students participated in a working practice that employed research methods and came to engage with various biological phenomena over the course of their work. A three-level analysis of the students' experiences focused on three processes that emerged: participatory appropriation, guided participation, and apprenticeship. These processes derive from advances in practice-oriented theories of knowing. Through their work in the field, the students were able to enact science autonomously; they engaged with peers and teachers in specific ways and developed new understandings about research and epistemology founded on their experiences in the field. Further discussion about the use of "practice" and "work" as analytical concepts in science education is also included.

Latent profile analysis of regression-based norms demonstrates relationship of compounding MS symptom burden and negative work events.

PubMed

Frndak, Seth E; Smerbeck, Audrey M; Irwin, Lauren N; Drake, Allison S; Kordovski, Victoria M; Kunker, Katrina A; Khan, Anjum L; Benedict, Ralph H B

2016-10-01

We endeavored to clarify how distinct co-occurring symptoms relate to the presence of negative work events in employed multiple sclerosis (MS) patients. Latent profile analysis (LPA) was utilized to elucidate common disability patterns by isolating patient subpopulations. Samples of 272 employed MS patients and 209 healthy controls (HC) were administered neuroperformance tests of ambulation, hand dexterity, processing speed, and memory. Regression-based norms were created from the HC sample. LPA identified latent profiles using the regression-based z-scores. Finally, multinomial logistic regression tested for negative work event differences among the latent profiles. Four profiles were identified via LPA: a common profile (55%) characterized by slightly below average performance in all domains, a broadly low-performing profile (18%), a poor motor abilities profile with average cognition (17%), and a generally high-functioning profile (9%). Multinomial regression analysis revealed that the uniformly low-performing profile demonstrated a higher likelihood of reported negative work events. Employed MS patients with co-occurring motor, memory and processing speed impairments were most likely to report a negative work event, classifying them as uniquely at risk for job loss.

Dual N-Back Working Memory Training in Healthy Adults: A Randomized Comparison to Processing Speed Training

PubMed Central

Lawlor-Savage, Linette; Goghari, Vina M.

2016-01-01

Enhancing cognitive ability is an attractive concept, particularly for middle-aged adults interested in maintaining cognitive functioning and preventing age-related declines. Computerized working memory training has been investigated as a safe method of cognitive enhancement in younger and older adults, although few studies have considered the potential impact of working memory training on middle-aged adults. This study investigated dual n-back working memory training in healthy adults aged 30–60. Fifty-seven adults completed measures of working memory, processing speed, and fluid intelligence before and after a 5-week web-based dual n-back or active control (processing speed) training program. Results: Repeated measures multivariate analysis of variance failed to identify improvements across the three cognitive composites, working memory, processing speed, and fluid intelligence, after training. Follow-up Bayesian analyses supported null findings for training effects for each individual composite. Findings suggest that dual n-back working memory training may not benefit working memory or fluid intelligence in healthy adults. Further investigation is necessary to clarify if other forms of working memory training may be beneficial, and what factors impact training-related benefits, should they occur, in this population. PMID:27043141

Identification of the isomers using principal component analysis (PCA) method

NASA Astrophysics Data System (ADS)

Kepceoǧlu, Abdullah; Gündoǧdu, Yasemin; Ledingham, Kenneth William David; Kilic, Hamdi Sukur

2016-03-01

In this work, we have carried out a detailed statistical analysis for experimental data of mass spectra from xylene isomers. Principle Component Analysis (PCA) was used to identify the isomers which cannot be distinguished using conventional statistical methods for interpretation of their mass spectra. Experiments have been carried out using a linear TOF-MS coupled to a femtosecond laser system as an energy source for the ionisation processes. We have performed experiments and collected data which has been analysed and interpreted using PCA as a multivariate analysis of these spectra. This demonstrates the strength of the method to get an insight for distinguishing the isomers which cannot be identified using conventional mass analysis obtained through dissociative ionisation processes on these molecules. The PCA results dependending on the laser pulse energy and the background pressure in the spectrometers have been presented in this work.

Description of inpatient medication management using cognitive work analysis.

PubMed

Pingenot, Alleene Anne; Shanteau, James; Sengstacke, L T C Daniel N

2009-01-01

The purpose of this article was to describe key elements of an inpatient medication system using the cognitive work analysis method of Rasmussen et al (Cognitive Systems Engineering. Wiley Series in Systems Engineering; 1994). The work of nurses and physicians were observed in routine care of inpatients on a medical-surgical unit and attached ICU. Interaction with pharmacists was included. Preoperative, postoperative, and medical care was observed. Personnel were interviewed to obtain information not easily observable during routine work. Communication between healthcare workers was projected onto an abstraction/decomposition hierarchy. Decision ladders and information flow charts were developed. Results suggest that decision making on an inpatient medical/surgical unit or ICU setting is a parallel, distributed process. Personnel are highly mobile and often are working on multiple issues concurrently. In this setting, communication is key to maintaining organization and synchronization for effective care. Implications for research approaches to system and interface designs and decision support for personnel involved in the process are discussed.

Signal-processing analysis of the MC2823 radar fuze: an addendum concerning clutter effects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jelinek, D.A.

1978-07-01

A detailed analysis of the signal processing of the MC2823 radar fuze was published by Thompson in 1976 which enabled the computation of dud probability versus signal-to-noise ratio where the noise was receiver noise. An addendum to Thompson's work was published by Williams in 1978 that modified the weighting function used by Thompson. The analysis presented herein extends the work of Thompson to include the effects of clutter (the non-signal portion of the echo from a terrain) using the new weighting function. This extension enables computation of dud probability versus signal-to-total-noise ratio where total noise is the sum of themore » receiver-noise power and the clutter power.« less

Engaging Parents in Early Head Start Home-Based Programs: How Do Home Visitors Do This?

PubMed

Shanti, Caroline

2017-01-01

Parental engagement is considered elemental to successful outcomes for parents and their children in early childhood home visiting programs. Engagement is that piece of parental involvement that refers to the working relationship between the parent and the home visitor. Multiple papers have called for research to pinpoint the ways in which home visitors work with parents to form these working relationships, and form partnerships to achieve positive outcomes. Analysis revealed that in individualizing their efforts to each family, home visitors follow semi-sequential steps in implementing engagement. This article presents a model of the process home visitors describe that resulted from analysis. Grounded theory techniques were used to analyze 29 interviews with Early Head Start (EHS) home visitors and 11 supervisors across four EHS programs in one region of the United States. The process of engagement as described emerges in three phases: (1) learning the parent's culture and style; (2) deepening the working partnership; and (3) balancing the ongoing work. Analysis further revealed specific strategies and goals that guide the work of home visitors in each of these three phases. This not only adds rich detail to the literature, but also provides a useful guide for programs and policy makers through identifying the areas where training and support will increase home visitor ability to engage parents.

Valuing the Accreditation Process

ERIC Educational Resources Information Center

Bahr, Maria

2018-01-01

The value of the National Association for Developmental Education (NADE) accreditation process is far-reaching. Not only do students and programs benefit from the process, but also the entire institution. Through data collection of student performance, analysis, and resulting action plans, faculty and administrators can work cohesively towards…

Performance Analysis: Work Control Events Identified January - August 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Grange, C E; Freeman, J W; Kerr, C E

2011-01-14

This performance analysis evaluated 24 events that occurred at LLNL from January through August 2010. The analysis identified areas of potential work control process and/or implementation weaknesses and several common underlying causes. Human performance improvement and safety culture factors were part of the causal analysis of each event and were analyzed. The collective significance of all events in 2010, as measured by the occurrence reporting significance category and by the proportion of events that have been reported to the DOE ORPS under the ''management concerns'' reporting criteria, does not appear to have increased in 2010. The frequency of reporting inmore » each of the significance categories has not changed in 2010 compared to the previous four years. There is no change indicating a trend in the significance category and there has been no increase in the proportion of occurrences reported in the higher significance category. Also, the frequency of events, 42 events reported through August 2010, is not greater than in previous years and is below the average of 63 occurrences per year at LLNL since 2006. Over the previous four years, an average of 43% of the LLNL's reported occurrences have been reported as either ''management concerns'' or ''near misses.'' In 2010, 29% of the occurrences have been reported as ''management concerns'' or ''near misses.'' This rate indicates that LLNL is now reporting fewer ''management concern'' and ''near miss'' occurrences compared to the previous four years. From 2008 to the present, LLNL senior management has undertaken a series of initiatives to strengthen the work planning and control system with the primary objective to improve worker safety. In 2008, the LLNL Deputy Director established the Work Control Integrated Project Team to develop the core requirements and graded elements of an institutional work planning and control system. By the end of that year this system was documented and implementation had begun. In 2009, training of the workforce began and as of the time of this report more than 50% of authorized Integration Work Sheets (IWS) use the activity-based planning process. In 2010, LSO independently reviewed the work planning and control process and confirmed to the Laboratory that the Integrated Safety Management (ISM) System was implemented. LLNL conducted a cross-directorate management self-assessment of work planning and control and is developing actions to respond to the issues identified. Ongoing efforts to strengthen the work planning and control process and to improve the quality of LLNL work packages are in progress: completion of remaining actions in response to the 2009 DOE Office of Health, Safety, and Security (HSS) evaluation of LLNL's ISM System; scheduling more than 14 work planning and control self-assessments in FY11; continuing to align subcontractor work control with the Institutional work planning and control system; and continuing to maintain the electronic IWS application. The 24 events included in this analysis were caused by errors in the first four of the five ISMS functions. The most frequent cause was errors in analyzing the hazards (Function 2). The second most frequent cause was errors occurring when defining the work (Function 1), followed by errors during the performance of work (Function 4). Interestingly, very few errors in developing controls (Function 3) resulted in events. This leads one to conclude that if improvements are made to defining the scope of work and analyzing the potential hazards, LLNL may reduce the frequency or severity of events. Analysis of the 24 events resulted in the identification of ten common causes. Some events had multiple causes, resulting in the mention of 39 causes being identified for the 24 events. The most frequent cause was workers, supervisors, or experts believing they understood the work and the hazards but their understanding was incomplete. The second most frequent cause was unclear, incomplete or confusing documents directing the work. Together, these two causes were mentioned 17 times and contributed to 13 of the events. All of the events with the cause of ''workers, supervisors, or experts believing they understood the work and the hazards but their understanding was incomplete'' had this error in the first two ISMS functions: define the work and analyze the hazard. This means that these causes result in the scope of work being ill-defined or the hazard(s) improperly analyzed. Incomplete implementation of these functional steps leads to the hazards not being controlled. The causes are then manifested in events when the work is conducted. The process to operate safely relies on accurately defining the scope of work. This review has identified a number of examples of latent organizational weakness in the execution of work control processes.« less

The terrain of health policy analysis in low and middle income countries: a review of published literature 1994–2007

PubMed Central

Gilson, Lucy; Raphaely, Nika

2008-01-01

This article provides the first ever review of literature analysing the health policy processes of low and middle income countries (LMICs). Based on a systematic search of published literature using two leading international databases, the article maps the terrain of work published between 1994 and 2007, in terms of policy topics, lines of inquiry and geographical base, as well as critically evaluating its strengths and weaknesses. The overall objective of the review is to provide a platform for the further development of this field of work. From an initial set of several thousand articles, only 391 were identified as relevant to the focus of inquiry. Of these, 164 were selected for detailed review because they present empirical analyses of health policy change processes within LMIC settings. Examination of these articles clearly shows that LMIC health policy analysis is still in its infancy. There are only small numbers of such analyses, whilst the diversity of policy areas, topics and analytical issues that have been addressed across a large number of country settings results in a limited depth of coverage within this body of work. In addition, the majority of articles are largely descriptive in nature, limiting understanding of policy change processes within or across countries. Nonetheless, the broad features of experience that can be identified from these articles clearly confirm the importance of integrating concern for politics, process and power into the study of health policy. By generating understanding of the factors influencing the experience and results of policy change, such analysis can inform action to strengthen future policy development and implementation. This article, finally, outlines five key actions needed to strengthen the field of health policy analysis within LMICs, including capacity development and efforts to generate systematic and coherent bodies of work underpinned by both the intent to undertake rigorous analytical work and concern to support policy change. PMID:18650209

Modeling and Analysis of Global and Regional Climate Change in Relation to Atmospheric Hydrologic Processes

NASA Technical Reports Server (NTRS)

Johnson, Donald R.

1998-01-01

The goal of this research is the continued development and application of global isentropic modeling and analysis capabilities to describe hydrologic processes and energy exchange in the climate system, and discern regional climate change. This work involves a combination of modeling and analysis efforts involving 4DDA datasets and simulations from the University of Wisconsin (UW) hybrid isentropic-sigma (theta-sigma) coordinate model and the GEOS GCM.

Application of ISO22000 and Failure Mode and Effect Analysis (fmea) for Industrial Processing of Poultry Products

NASA Astrophysics Data System (ADS)

Varzakas, Theodoros H.; Arvanitoyannis, Ioannis S.

Failure Mode and Effect Analysis (FMEA) model has been applied for the risk assessment of poultry slaughtering and manufacturing. In this work comparison of ISO22000 analysis with HACCP is carried out over poultry slaughtering, processing and packaging. Critical Control points and Prerequisite programs (PrPs) have been identified and implemented in the cause and effect diagram (also known as Ishikawa, tree diagram and fishbone diagram).

Work Process in Primary Health Care: action research with Community Health Workers.

PubMed

Cordeiro, Luciana; Soares, Cassia Baldini

2015-11-01

The aim of this article was to describe and analyze the work of community health workers (CHW). The main objective of study was to analyze the development process of primary health care practices related to drug consumption. The study is based on the Marxist theoretical orientation and the action research methodology, which resulted in the performance of 15 emancipatory workshops. The category work process spawned the content analysis. It exposed the social abandonment of the environment in which the CHWs work is performed. The latter had an essential impact on the identification of the causes of drug-related problems. These findings made it possible to criticize the reiterative, stressful actions that are being undertaken there. Such an act resulted in raising of the awareness and creating the means for political action. The CHWs motivated themselves to recognize the object of the work process in primary health care, which they found to be the disease or addiction in the case of drug users. They have criticized this categorization as well as discussed the social division of work and the work itself whilst recognizing themselves as mere instruments in the work process. The latter has inspired the CHW to become subjects, or co-producers of transformations of social needs.

Simulation based energy-resource efficient manufacturing integrated with in-process virtual management

NASA Astrophysics Data System (ADS)

Katchasuwanmanee, Kanet; Cheng, Kai; Bateman, Richard

2016-09-01

As energy efficiency is one of the key essentials towards sustainability, the development of an energy-resource efficient manufacturing system is among the great challenges facing the current industry. Meanwhile, the availability of advanced technological innovation has created more complex manufacturing systems that involve a large variety of processes and machines serving different functions. To extend the limited knowledge on energy-efficient scheduling, the research presented in this paper attempts to model the production schedule at an operation process by considering the balance of energy consumption reduction in production, production work flow (productivity) and quality. An innovative systematic approach to manufacturing energy-resource efficiency is proposed with the virtual simulation as a predictive modelling enabler, which provides real-time manufacturing monitoring, virtual displays and decision-makings and consequentially an analytical and multidimensional correlation analysis on interdependent relationships among energy consumption, work flow and quality errors. The regression analysis results demonstrate positive relationships between the work flow and quality errors and the work flow and energy consumption. When production scheduling is controlled through optimization of work flow, quality errors and overall energy consumption, the energy-resource efficiency can be achieved in the production. Together, this proposed multidimensional modelling and analysis approach provides optimal conditions for the production scheduling at the manufacturing system by taking account of production quality, energy consumption and resource efficiency, which can lead to the key competitive advantages and sustainability of the system operations in the industry.

The Role of the Company in Generating Skills. The Learning Effects of Work Organization in the United Kingdom.

ERIC Educational Resources Information Center

Walsh, Kenneth; Green, Andy; Steedman, Hilary

The impact of developments in work organizations on the skilling process in the United Kingdom was studied through a macro analysis of available statistical information about the development of workplace training in the United Kingdom and case studies of three U.K. firms. The macro analysis focused on the following: initial training arrangements;…

Between-person and within-person associations among processing speed, attention switching, and working memory in younger and older adults.

PubMed

Stawski, Robert S; Sliwinski, Martin J; Hofer, Scott M

2013-01-01

BACKGROUND/STUDY CONTEXT: Theories of cognitive aging predict associations among processes that transpire within individuals, but are often tested by examining between-person relationships. The authors provide an empirical demonstration of how associations among measures of processing speed, attention switching, and working memory are different when considered between persons versus within persons over time. A sample of 108 older adults (M (age) = 80.8, range = 66-95) and 68 younger adults (M (age) = 20.2, range = 18-24) completed measures of processing speed, attention switching, and working memory on six occasions over a 14-day period. Multilevel modeling was used to examine processing speed and attention switching performance as predictors of working memory performance simultaneously across days (within-person) and across individuals (between-person). The findings indicates that simple comparison and response speed predicted working memory better than attention switching between persons, whereas attention switching predicted working memory better than simple comparison and response speed within persons over time. Furthermore, the authors did not observe strong evidence of age differences in these associations either within or between persons. The findings of the current study suggest that processing speed is important for understanding between-person and age-related differences in working memory, whereas attention switching is more important for understanding within-person variation in working memory. The authors conclude that theories of cognitive aging should be evaluated by analysis of within-person processes, not exclusively age-related individual differences.

Between-Person and Within-Person Associations among Processing Speed, Attention Switching and Working Memory in Younger and Older Adults

PubMed Central

Stawski, Robert S.; Sliwinski, Martin J.; Hofer, Scott M.

2013-01-01

Background/Study Context Theories of cognitive aging predict associations among processes that transpire within individuals, but are often tested by examining between-person relationships. The authors provide an empirical demonstration of how associations among measures of processing speed, attention switching, and working memory are different when considered between persons versus within persons over time. Methods A sample of 108 older adults (Mage: 80.8, range: 66–95) and 68 younger adults (Mage: 20.2, range:18–24) completed measures of processing speed, attention switching, and working memory on six occasions over a 14-day period. Multilevel modeling was used to examine processing speed and attention switching performance as predictors of working memory performance simultaneously across days (within-person) and across individuals (between-person). Results The findings indicates that simple comparison and response speed predicted working memory better than attention switching between persons, whereas attention switching predicted working memory better than simple comparison and response speed within persons over time. Furthermore, the authors did not observe strong evidence of age differences in these associations either within or between persons. Conclusion The findings of the current study suggest that processing speed is important for understanding between-person and age-related differences in working memory, whereas attention switching is more important for understanding within-person variation in working memory. The authors conclude that theories of cognitive aging should be evaluated by analysis of within-person processes, not exclusively age-related individual differences. PMID:23421639

Automated Student Aid Processing: The Challenge and Opportunity.

ERIC Educational Resources Information Center

St. John, Edward P.

1985-01-01

To utilize automated technology for student aid processing, it is necessary to work with multi-institutional offices (student aid, admissions, registration, and business) and to develop automated interfaces with external processing systems at state and federal agencies and perhaps at need-analysis organizations and lenders. (MLW)

Multicriteria Analysis of Assembling Buildings from Steel Frame Structures

NASA Astrophysics Data System (ADS)

Miniotaite, Ruta

2017-10-01

Steel frame structures are often used in the construction of public and industrial buildings. They are used for: all types of slope roofs; walls of newly-built public and industrial buildings; load bearing structures; roofs of renovated buildings. The process of assembling buildings from steel frame structures should be analysed as an integrated process influenced by such factors as construction materials and machinery used, the qualification level of construction workers, complexity of work, available finance. It is necessary to find a rational technological design solution for assembling buildings from steel frame structures by conducting a multiple criteria analysis. The analysis provides a possibility to evaluate the engineering considerations and find unequivocal solutions. The rational alternative of a complex process of assembling buildings from steel frame structures was found through multiple criteria analysis and multiple criteria evaluation. In multiple criteria evaluation of technological solutions for assembling buildings from steel frame structures by pairwise comparison method the criteria by significance are distributed as follows: durability is the most important criterion in the evaluation of alternatives; the price (EUR/unit of measurement) of a part of assembly process; construction workers’ qualification level (category); mechanization level of a part of assembling process (%), and complexity of assembling work (in points) are less important criteria.

A Clinical Case Presentation: Understanding and Interpreting Dreams while Working Through Developmental Trauma.

PubMed

Levy, Joshua; Finnegan, Paul

2016-02-01

The purpose of this paper is to demonstrate the unique place of understanding and interpreting dreams in the psychoanalytic process while working through developmental trauma. This psychoanalytic process extended over six years and is presented in four phases: establishing the therapeutic alliance, a crisis, working through, and termination. Dreams from each of these four phases of the analysis are presented, and the collaborative work of understanding and interpreting these dreams is highlighted. Evidence is presented that from this analytic work there ensued an amelioration of the impact of developmental trauma and a furtherance of the development of internal psychic structure. © 2016 by the American Psychoanalytic Association.

The Automated System of the Rhythm Analysis of the Educational Process in a Higher Educational Institution on the Basis of Aprioristic Data

ERIC Educational Resources Information Center

Pelin, Nicolae; Mironov, Vladimir

2008-01-01

In this article the problems of functioning algorithms development for system of the automated analysis of educational process rhythm in a higher educational institution are considered. Using the device of experiment planning for conducting the scientific researches, adapted methodologies, received by authors in the dissertational works at the…

The Beady Eye of the Professional Development Appraisal System: A Foucauldian Cross-Case Analysis of the Teacher Evaluation Process

ERIC Educational Resources Information Center

Torres, Dalia

2012-01-01

The purpose of this deconstructive case study was to conduct a Foucauldian power/knowledge analysis constructed from the perceptions of three teachers at an intermediate school in South Texas regarding the role of the teacher evaluation process and its influence on instructional practices. Using Foucault's (1977a) work on power/knowledge, of…

Simulation of springback and microstructural analysis of dual phase steels

NASA Astrophysics Data System (ADS)

Kalyan, T. Sri.; Wei, Xing; Mendiguren, Joseba; Rolfe, Bernard

2013-12-01

With increasing demand for weight reduction and better crashworthiness abilities in car development, advanced high strength Dual Phase (DP) steels have been progressively used when making automotive parts. The higher strength steels exhibit higher springback and lower dimensional accuracy after stamping. This has necessitated the use of simulation of each stamped component prior to production to estimate the part's dimensional accuracy. Understanding the micro-mechanical behaviour of AHSS sheet may provide more accuracy to stamping simulations. This work can be divided basically into two parts: first modelling a standard channel forming process; second modelling the micro-structure of the process. The standard top hat channel forming process, benchmark NUMISHEET'93, is used for investigating springback effect of WISCO Dual Phase steels. The second part of this work includes the finite element analysis of microstructures to understand the behaviour of the multi-phase steel at a more fundamental level. The outcomes of this work will help in the dimensional control of steels during manufacturing stage based on the material's microstructure.

Modeling and Analysis of Power Processing Systems (MAPPS). Volume 1: Technical report

NASA Technical Reports Server (NTRS)

Lee, F. C.; Rahman, S.; Carter, R. A.; Wu, C. H.; Yu, Y.; Chang, R.

1980-01-01

Computer aided design and analysis techniques were applied to power processing equipment. Topics covered include: (1) discrete time domain analysis of switching regulators for performance analysis; (2) design optimization of power converters using augmented Lagrangian penalty function technique; (3) investigation of current-injected multiloop controlled switching regulators; and (4) application of optimization for Navy VSTOL energy power system. The generation of the mathematical models and the development and application of computer aided design techniques to solve the different mathematical models are discussed. Recommendations are made for future work that would enhance the application of the computer aided design techniques for power processing systems.

SWOT analysis of a pediatric rehabilitation programme: a participatory evaluation fostering quality improvement.

PubMed

Camden, Chantal; Swaine, Bonnie; Tétreault, Sylvie; Bergeron, Sophie

2009-01-01

To present the results of a strengths, weaknesses, opportunities and threats (SWOT) analysis used as part of a process aimed at reorganising services provided within a pediatric rehabilitation programme (PRP) in Quebec, Canada and to report the perceptions of the planning committee members regarding the usefulness of the SWOT in this process. Thirty-six service providers working in the PRP completed a SWOT questionnaire and reported what they felt worked and what did not work in the existing model of care. Their responses were used by a planning committee over a 12-month period to assist in the development of a new service delivery model. Committee members shared their thoughts about the usefulness of the SWOT. Current programme strengths included favourable organisational climate and interdisciplinary work whereas weaknesses included lack of psychosocial support to families and long waiting times for children. Opportunities included working with community partners, whereas fear of losing professional autonomy with the new service model was a threat. The SWOT results helped the planning committee redefine the programme goals and make decisions to improve service coordination. SWOT analysis was deemed as a very useful tool to help guide service reorganisation. SWOT analysis appears to be an interesting evaluation tool to promote awareness among service providers regarding the current functioning of a rehabilitation programme. It fosters their active participation in the reorganisation of a new service delivery model for pediatric rehabilitation.

Participative leadership in the management process of nightshift nursing.

PubMed

da Costa, Diovane Ghignatti; Dall'Agnol, Clarice Maria

2011-01-01

This is a qualitative, exploratory, descriptive study, aiming to identify the perceptions of nurses regarding the leadership process and to analyze how this process takes place on the nightshift. Data collection was performed through the Focus Groups Technique, with 13 nightshift nurses of a public teaching hospital. Two categories that resulted from the thematic analysis are the focus of this article: the context of nightshift nursing work and leadership from the perception of the nightshift nurses. Teamwork is an important condition to vitalize the participatory perspective of the leadership process, given the necessary relationship of support and integration, above all in the nightshift nursing work. This exercise challenges the nurse in the solidification of a culture that promotes spaces for reflection regarding the work, integrating leadership with a learning process that is constituted through constructive bonds between the workers.

Generalized Linear Covariance Analysis

NASA Technical Reports Server (NTRS)

Carpenter, James R.; Markley, F. Landis

2014-01-01

This talk presents a comprehensive approach to filter modeling for generalized covariance analysis of both batch least-squares and sequential estimators. We review and extend in two directions the results of prior work that allowed for partitioning of the state space into solve-for'' and consider'' parameters, accounted for differences between the formal values and the true values of the measurement noise, process noise, and textita priori solve-for and consider covariances, and explicitly partitioned the errors into subspaces containing only the influence of the measurement noise, process noise, and solve-for and consider covariances. In this work, we explicitly add sensitivity analysis to this prior work, and relax an implicit assumption that the batch estimator's epoch time occurs prior to the definitive span. We also apply the method to an integrated orbit and attitude problem, in which gyro and accelerometer errors, though not estimated, influence the orbit determination performance. We illustrate our results using two graphical presentations, which we call the variance sandpile'' and the sensitivity mosaic,'' and we compare the linear covariance results to confidence intervals associated with ensemble statistics from a Monte Carlo analysis.

[Job satisfaction of sales people: a covariance structure analysis of the motivational process].

PubMed

Adachi, T

1998-08-01

The purpose of this study was to investigate the relationship among job satisfaction, job involvement, and work motivation. Two hundred thirty-nine sales people completed a questionnaire of job satisfaction (pay, interpersonal relationship, work environment, and job content), job involvement, and work motivation. The data were analyzed with covariance structure analysis, and the model, which was constructed beforehand, fitted well with relatively high GFI and AGFI. Results of the analysis showed that job satisfaction, in terms of pay and interpersonal relationship, influenced job content satisfaction, which in turn indirectly influenced work motivation, mediated through job involvement. In addition, the data indicated that satisfaction with customer relationship was strongly related to job content satisfaction in the sample of sales people.

Centralized processing of contact-handled TRU waste feasibility analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1986-12-01

This report presents work for the feasibility study of central processing of contact-handled TRU waste. Discussion of scenarios, transportation options, summary of cost estimates, and institutional issues are a few of the subjects discussed. (JDL)

Simulation research on the process of large scale ship plane segmentation intelligent workshop

NASA Astrophysics Data System (ADS)

Xu, Peng; Liao, Liangchuang; Zhou, Chao; Xue, Rui; Fu, Wei

2017-04-01

Large scale ship plane segmentation intelligent workshop is a new thing, and there is no research work in related fields at home and abroad. The mode of production should be transformed by the existing industry 2.0 or part of industry 3.0, also transformed from "human brain analysis and judgment + machine manufacturing" to "machine analysis and judgment + machine manufacturing". In this transforming process, there are a great deal of tasks need to be determined on the aspects of management and technology, such as workshop structure evolution, development of intelligent equipment and changes in business model. Along with them is the reformation of the whole workshop. Process simulation in this project would verify general layout and process flow of large scale ship plane section intelligent workshop, also would analyze intelligent workshop working efficiency, which is significant to the next step of the transformation of plane segmentation intelligent workshop.

Development of Cross-Platform Software for Well Logging Data Visualization

NASA Astrophysics Data System (ADS)

Akhmadulin, R. K.; Miraev, A. I.

2017-07-01

Well logging data processing is one of the main sources of information in the oil-gas field analysis and is of great importance in the process of its development and operation. Therefore, it is important to have the software which would accurately and clearly provide the user with processed data in the form of well logs. In this work, there have been developed a software product which not only has the basic functionality for this task (loading data from .las files, well log curves display, etc.), but can be run in different operating systems and on different devices. In the article a subject field analysis and task formulation have been performed, and the software design stage has been considered. At the end of the work the resulting software product interface has been described.

Data evaluation, analysis, and scientific study

NASA Technical Reports Server (NTRS)

Wu, S. T.

1991-01-01

Extensive work was performed in data analysis and modeling of solar active phenomena. The work consisted in the study of UV data from the Ultraviolet Spectrometer and Polarimeter (UVSP) instrument on board the Solar Maximum Mission satellite. These data were studied in conjunction with X-rays from the Hard X-ray Imaging Spectrometer (HXIS) instrument, and with H-alpha and magnetographic data from ground-based observatories. The processes we studied are the active phenomena which result from the interaction of the solar magnetic fields with the plasma in the outer regions of the solar atmosphere. These processes include some very dynamic processes such as the prominence eruptions and the 'microflares'. Our research aimed at characterizing the following: the observed phenomena, the possible physical models, and the relevance to the chromospheric and coronal heating.

Formal Specification and Automatic Analysis of Business Processes under Authorization Constraints: An Action-Based Approach

NASA Astrophysics Data System (ADS)

Armando, Alessandro; Giunchiglia, Enrico; Ponta, Serena Elisa

We present an approach to the formal specification and automatic analysis of business processes under authorization constraints based on the action language \\cal{C}. The use of \\cal{C} allows for a natural and concise modeling of the business process and the associated security policy and for the automatic analysis of the resulting specification by using the Causal Calculator (CCALC). Our approach improves upon previous work by greatly simplifying the specification step while retaining the ability to perform a fully automatic analysis. To illustrate the effectiveness of the approach we describe its application to a version of a business process taken from the banking domain and use CCALC to determine resource allocation plans complying with the security policy.

[Corrected Title: Solid-Phase Extraction of Polar Compounds from Water] Automated Electrostatics Environmental Chamber

NASA Technical Reports Server (NTRS)

Sauer, Richard; Rutz, Jeffrey; Schultz, John

2005-01-01

A solid-phase extraction (SPE) process has been developed for removing alcohols, carboxylic acids, aldehydes, ketones, amines, and other polar organic compounds from water. This process can be either a subprocess of a water-reclamation process or a means of extracting organic compounds from water samples for gas-chromatographic analysis. This SPE process is an attractive alternative to an Environmental Protection Administration liquid-liquid extraction process that generates some pollution and does not work in a microgravitational environment. In this SPE process, one forces a water sample through a resin bed by use of positive pressure on the upstream side and/or suction on the downstream side, thereby causing organic compounds from the water to be adsorbed onto the resin. If gas-chromatographic analysis is to be done, the resin is dried by use of a suitable gas, then the adsorbed compounds are extracted from the resin by use of a solvent. Unlike the liquid-liquid process, the SPE process works in both microgravity and Earth gravity. In comparison with the liquid-liquid process, the SPE process is more efficient, extracts a wider range of organic compounds, generates less pollution, and costs less.

[Path analysis on workplace violence affecting work ability, job satisfaction and turnover intent in health professionals in Shangqiu City].

PubMed

Wang, Pei-xi; Wang, Mian-zhen; Bai, Qin; Jia, Cai-feng; Lan, Ya-jia; Wang, Zhi-ming; Luan, Rong-sheng

2006-11-01

To explore the effects of workplace violence on work ability, work satisfaction and turnover intent based on the theory of occupational stress in health professionals and to provide evidence for evaluating the process and consequence of workplace violence. Subjects of 483 health professionals from 5 hospitals in Shangqiu city of Hennan Province were selected with stratified cluster random sampling method. Workplace violence, violent fear at work, coping resources, work ability, job satisfaction and turnover intent were measured with questionnaires. Ordinal regression analysis and path analysis were applied to analyze the data. Workplace violence had direct or indirect effects on the work ability and job satisfaction through the fear of future violence at work. Workplace violence only had indirect effects on turnover intent through the fear and job satisfaction in health professionals. Workplace violence had direct and indirect effects on the work ability, job satisfaction and turnover intent. Measures should be taken to reduce workplace violence and it' s effects in health professionals.

Commentary: Mediation Analysis, Causal Process, and Cross-Sectional Data

ERIC Educational Resources Information Center

Shrout, Patrick E.

2011-01-01

Maxwell, Cole, and Mitchell (2011) extended the work of Maxwell and Cole (2007), which raised important questions about whether mediation analyses based on cross-sectional data can shed light on longitudinal mediation process. The latest article considers longitudinal processes that can only be partially explained by an intervening variable, and…

Low cost solar array project production process and equipment task: A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Several major modifications were made to the design presented at the PDR. The frame was deleted in favor of a "frameless" design which will provide a substantially improved cell packing factor. Potential shaded cell damage resulting from operation into a short circuit can be eliminated by a change in the cell series/parallel electrical interconnect configuration. The baseline process sequence defined for the MEPSON was refined and equipment design and specification work was completed. SAMICS cost analysis work accelerated, format A's were prepared and computer simulations completed. Design work on the automated cell interconnect station was focused on bond technique selection experiments.

How high-performance work systems drive health care value: an examination of leading process improvement strategies.

PubMed

Robbins, Julie; Garman, Andrew N; Song, Paula H; McAlearney, Ann Scheck

2012-01-01

As hospitals focus on increasing health care value, process improvement strategies have proliferated, seemingly faster than the evidence base supporting them. Yet, most process improvement strategies are associated with work practices for which solid evidence does exist. Evaluating improvement strategies in the context of evidence-based work practices can provide guidance about which strategies would work best for a given health care organization. We combined a literature review with analysis of key informant interview data collected from 5 case studies of high-performance work practices (HPWPs) in health care organizations. We explored the link between an evidence-based framework for HPWP use and 3 process improvement strategies: Hardwiring Excellence, Lean/Six Sigma, and Baldrige. We found that each of these process improvement strategies has not only strengths but also important gaps with respect to incorporating HPWPs involving engaging staff, aligning leaders, acquiring and developing talent, and empowering the front line. Given differences among these strategies, our analyses suggest that some may work better than others for individual health care organizations, depending on the organizations' current management systems. In practice, most organizations implementing improvement strategies would benefit from including evidence-based HPWPs to maximize the potential for process improvement strategies to increase value in health care.

Nondestructive study of corrosion by the analysis of diffused light

NASA Astrophysics Data System (ADS)

Hogert, Elsa N.; Landau, Monica R.; Marengo, Jose A.; Ruiz Gale, Maria F.; Gaggioli, Nestor G.; Paiva, Raul D., Jr.; Soga, Diogo; Muramatsu, Mikiya

1999-07-01

This work describes the application of mean intensity diffusion analysis to detect and analyze metallic corrosion phenomena. We present some new results in the characterization of the corrosion process using a model based in electroerosion phenomena. Valuable information is provided about surface microrelief changes, which is also useful for numerous engineering applications. The quality of our results supports the idea that this technique can contribute to a better analysis of corrosion processes, in particular in real time.

Prevention of falls, malnutrition and pressure ulcers among older persons - nursing staff's experiences of a structured preventive care process.

PubMed

Lannering, Christina; Ernsth Bravell, Marie; Johansson, Linda

2017-05-01

A structured and systematic care process for preventive work, aimed to reduce falls, pressure ulcers and malnutrition among older people, has been developed in Sweden. The process involves risk assessment, team-based interventions and evaluation of results. Since development, this structured work process has become web-based and has been implemented in a national quality registry called 'Senior Alert' and used countrywide. The aim of this study was to describe nursing staff's experience of preventive work by using the structured preventive care process as outlined by Senior Alert. Eight focus group interviews were conducted during 2015 including staff from nursing homes and home-based nursing care in three municipalities. The interview material was subjected to qualitative content analysis. In this study, both positive and negative opinions were expressed about the process. The systematic and structured work flow seemed to only partly facilitate care providers to improve care quality by making better clinical assessments, performing team-based planned interventions and learning from results. Participants described lack of reliability in the assessments and varying opinions about the structure. Furthermore, organisational structures limited the preventive work. © 2016 John Wiley & Sons Ltd.

Work flow analysis of around-the-clock processing of blood culture samples and integrated MALDI-TOF mass spectrometry analysis for the diagnosis of bloodstream infections.

PubMed

Schneiderhan, Wilhelm; Grundt, Alexander; Wörner, Stefan; Findeisen, Peter; Neumaier, Michael

2013-11-01

Because sepsis has a high mortality rate, rapid microbiological diagnosis is required to enable efficient therapy. The effectiveness of MALDI-TOF mass spectrometry (MALDI-TOF MS) analysis in reducing turnaround times (TATs) for blood culture (BC) pathogen identification when available in a 24-h hospital setting has not been determined. On the basis of data from a total number of 912 positive BCs collected within 140 consecutive days and work flow analyses of laboratory diagnostics, we evaluated different models to assess the TATs for batch-wise and for immediate response (real-time) MALDI-TOF MS pathogen identification of positive BC results during the night shifts. The results were compared to TATs from routine BC processing and biochemical identification performed during regular working hours. Continuous BC incubation together with batch-wise MALDI-TOF MS analysis enabled significant reductions of up to 58.7 h in the mean TATs for the reporting of the bacterial species. The TAT of batch-wise MALDI-TOF MS analysis was inferior by a mean of 4.9 h when compared to the model of the immediate work flow under ideal conditions with no constraints in staff availability. Together with continuous cultivation of BC, the 24-h availability of MALDI-TOF MS can reduce the TAT for microbial pathogen identification within a routine clinical laboratory setting. Batch-wise testing of positive BC loses a few hours compared to real-time identification but is still far superior to classical BC processing. Larger prospective studies are required to evaluate the contribution of rapid around-the-clock pathogen identification to medical decision-making for septicemic patients.

Laser-induced dissociation processes of protonated glucose: dehydration reactions vs cross-ring dissociation

NASA Astrophysics Data System (ADS)

Dyakov, Y. A.; Kazaryan, M. A.; Golubkov, M. G.; Gubanova, D. P.; Bulychev, N. A.; Kazaryan, S. M.

2018-04-01

Studying the processes occurring in biological systems under irradiation is critically important for understanding the principles of working of biological systems. One of the main problems, which stimulate interest to the processes of photo-induced excitation and ionization of biomolecules, is the necessity of their identification by various mass spectrometry (MS) methods. While simple analysis of small molecules became a standard MS technique long time ago, recognition of large molecules, especially carbohydrates, is still a difficult problem, and requires sophisticated techniques and complicated computer analysis. Due to the large variety of substances in the samples, as far as the complexity of the processes occurring after excitation/ionization of the molecules, the recognition efficiency of MS technique in terms of carbohydrates is still not high enough. Additional theoretical and experimental analysis of ionization and dissociation processes in various kinds of polysaccharides, beginning from the simplest ones, is necessary. In our work, we extent previous theoretical and experimental studies of saccharides, and concentrate our attention to protonated glucose. In this article we paid the most attention to the cross-ring dissociation and water loss reactions due to their importance for identification of various isomers of hydrocarbon molecules (for example, distinguish α- and β-glucose).

Research on probabilistic information processing

NASA Technical Reports Server (NTRS)

Edwards, W.

1973-01-01

The work accomplished on probabilistic information processing (PIP) is reported. The research proposals and decision analysis are discussed along with the results of research on MSC setting, multiattribute utilities, and Bayesian research. Abstracts of reports concerning the PIP research are included.

Analysis and control of the METC fluid bed gasifier. Quarterly progress report, January--March 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-03-01

This document summarizes work performed for the period 10/1/94 to 3/31/95. In this work, three components will form the basis for design of a control scheme for the Fluidized Bed Gasifier (FBG) at METC: (1) a control systems analysis based on simple linear models derived from process data, (2) review of the literature on fluid bed gasifier operation and control, and (3) understanding of present FBG operation and real world considerations. Below we summarize work accomplished to data in each of these areas.

Interrelationship Between Organizational and Relational Aspects and the Return-to-Work Process: A Case Study with Nursing Professionals at a Teaching Hospital in Brazil.

PubMed

Lancman, S; Barros, J O; Silva, M D; Pereira, A R; Jardim, T A

2017-03-01

Introduction The process of returning to work, especially for individuals with labor restrictions, impacts work teams and interferes with the labor reinsertion process. In this study, we aimed to understand the impact of these situations on a nursing team from both organizational and relational perspectives. Methods We conducted a qualitative research study at a university hospital in the municipality of São Paulo using three strategies: documentary analysis; semi-structured interviews with pairs of workers returning to a labor situation; and a focus group with nursing managers. Results Medical leaves of absence overburden the employees who remain working. Regarding the return to work, the participants reported both positive and negative aspects. One positive aspect reported was that those who return to work contribute to the division of labor, generating solidarity and cooperation. The negative aspects reported were related to the return of workers with labor restrictions who do not fully resume their activities, consequently generating conflicts within the work teams that interfere with the reintegration processes. The supervisors reported difficulties reorganizing work on a broad scale and assessing the workers' diagnoses and symptoms and the workers themselves in terms of the necessity of their leaves and the validity of their labor restrictions. Conclusion The organization of labor and social relationships among peers and supervisors is a significant contributor to the success or failure of the work reintegration process and therefore should be considered. We aimed to address this issue by highlighting the complexity of the return-to-work process among health workers.

Job Performance as Multivariate Dynamic Criteria: Experience Sampling and Multiway Component Analysis

ERIC Educational Resources Information Center

Spain, Seth M.; Miner, Andrew G.; Kroonenberg, Pieter M.; Drasgow, Fritz

2010-01-01

Questions about the dynamic processes that drive behavior at work have been the focus of increasing attention in recent years. Models describing behavior at work and research on momentary behavior indicate that substantial variation exists within individuals. This article examines the rationale behind this body of work and explores a method of…

A Common Methodology: Using Cluster Analysis to Identify Organizational Culture across Two Workforce Datasets

ERIC Educational Resources Information Center

Munn, Sunny L.

2016-01-01

Organizational structures are comprised of an organizational culture created by the beliefs, values, traditions, policies and processes carried out by the organization. The work-life system in which individuals use work-life initiatives to achieve a work-life balance can be influenced by the type of organizational culture within one's workplace,…

Cognitive Task Analysis, Interface Design, and Technical Troubleshooting.

ERIC Educational Resources Information Center

Steinberg, Linda S.; Gitomer, Drew H.

A model of the interface design process is proposed that makes use of two interdependent levels of cognitive analysis: the study of the criterion task through an analysis of expert/novice differences and the evaluation of the working user interface design through the application of a practical interface analysis methodology (GOMS model). This dual…

CDO budgeting

NASA Astrophysics Data System (ADS)

Nesladek, Pavel; Wiswesser, Andreas; Sass, Björn; Mauermann, Sebastian

2008-04-01

The Critical dimension off-target (CDO) is a key parameter for mask house customer, affecting directly the performance of the mask. The CDO is the difference between the feature size target and the measured feature size. The change of CD during the process is either compensated within the process or by data correction. These compensation methods are commonly called process bias and data bias, respectively. The difference between data bias and process bias in manufacturing results in systematic CDO error, however, this systematic error does not take into account the instability of the process bias. This instability is a result of minor variations - instabilities of manufacturing processes and changes in materials and/or logistics. Using several masks the CDO of the manufacturing line can be estimated. For systematic investigation of the unit process contribution to CDO and analysis of the factors influencing the CDO contributors, a solid understanding of each unit process and huge number of masks is necessary. Rough identification of contributing processes and splitting of the final CDO variation between processes can be done with approx. 50 masks with identical design, material and process. Such amount of data allows us to identify the main contributors and estimate the effect of them by means of Analysis of variance (ANOVA) combined with multivariate analysis. The analysis does not provide information about the root cause of the variation within the particular unit process, however, it provides a good estimate of the impact of the process on the stability of the manufacturing line. Additionally this analysis can be used to identify possible interaction between processes, which cannot be investigated if only single processes are considered. Goal of this work is to evaluate limits for CDO budgeting models given by the precision and the number of measurements as well as partitioning the variation within the manufacturing process. The CDO variation splits according to the suggested model into contributions from particular processes or process groups. Last but not least the power of this method to determine the absolute strength of each parameter will be demonstrated. Identification of the root cause of this variation within the unit process itself is not scope of this work.

Using Earth Observations to Understand and Predict Infectious Diseases

NASA Technical Reports Server (NTRS)

Soebiyanto, Radina P.; Kiang, Richard

2015-01-01

This presentation discusses the processes from data collection and processing to analysis involved in unraveling patterns between disease outbreaks and the surrounding environment and meteorological conditions. We used these patterns to estimate when and where disease outbreaks will occur. As a case study, we will present our work on assessing the relationship between meteorological conditions and influenza in Central America. Our work represents the discovery, prescriptive and predictive aspects of data analytics.

Validating a work group climate assessment tool for improving the performance of public health organizations

PubMed Central

Perry, Cary; LeMay, Nancy; Rodway, Greg; Tracy, Allison; Galer, Joan

2005-01-01

Background This article describes the validation of an instrument to measure work group climate in public health organizations in developing countries. The instrument, the Work Group Climate Assessment Tool (WCA), was applied in Brazil, Mozambique, and Guinea to assess the intermediate outcomes of a program to develop leadership for performance improvement. Data were collected from 305 individuals in 42 work groups, who completed a self-administered questionnaire. Methods The WCA was initially validated using Cronbach's alpha reliability coefficient and exploratory factor analysis. This article presents the results of a second validation study to refine the initial analyses to account for nested data, to provide item-level psychometrics, and to establish construct validity. Analyses included eigenvalue decomposition analysis, confirmatory factor analysis, and validity and reliability analyses. Results This study confirmed the validity and reliability of the WCA across work groups with different demographic characteristics (gender, education, management level, and geographical location). The study showed that there is agreement between the theoretical construct of work climate and the items in the WCA tool across different populations. The WCA captures a single perception of climate rather than individual sub-scales of clarity, support, and challenge. Conclusion The WCA is useful for comparing the climates of different work groups, tracking the changes in climate in a single work group over time, or examining differences among individuals' perceptions of their work group climate. Application of the WCA before and after a leadership development process can help work groups hold a discussion about current climate and select a target for improvement. The WCA provides work groups with a tool to take ownership of their own group climate through a process that is simple and objective and that protects individual confidentiality. PMID:16223447

Response of the Alliance 1 Proof-of-Concept Airplane Under Gust Loads

NASA Technical Reports Server (NTRS)

Naser, A. S.; Pototzky, A. S.; Spain, C. V.

2001-01-01

This report presents the work performed by Lockheed Martin's Langley Program Office in support of NASA's Environmental Research Aircraft and Sensor Technology (ERAST) program. The primary purpose of this work was to develop and demonstrate a gust analysis method which accounts for the span-wise variation of gust velocity. This is important because these unmanned aircraft having high aspect ratios and low wing loading are very flexible, and fly at low speeds. The main focus of the work was therefore to perform a two-dimensional Power Spectrum Density (PSD) analysis of the Alliance 1 Proof-of-Concept Unmanned Aircraft, As of this writing, none of the aircraft described in this report have been constructed. They are concepts represented by analytical models. The process first involved the development of suitable structural and aeroelastic Finite Element Models (FEM). This was followed by development of a one-dimensional PSD gust analysis, and then the two-dimensional (PSD) analysis of the Alliance 1. For further validation and comparison, two additional analyses were performed. A two-dimensional PSD gust analysis was performed on a simplet MSC/NASTRAN example problem. Finally a one-dimensional discrete gust analysis was performed on Alliance 1. This report describes this process, shows the relevant comparisons between analytical methods, and discusses the physical meanings of the results.

Known Good Substrates Year 1

DTIC Science & Technology

2007-12-05

yield record setting carrier lifetime values and very low concentrations of point defects. Epiwafers delivered for fabrication of RF static induction ...boules and on improved furnace uniformity (adding rotation, etc.). Pareto analysis was performed on wafer yield loss at the start of every quarter...100mm PVT process. Work focused on modeling the process for longer (50 mm) boules and on improved furnace uniformity. Pareto analysis was performed

Research of processes of reception and analysis of dynamic digital medical images in hardware/software complexes used for diagnostics and treatment of cardiovascular diseases

NASA Astrophysics Data System (ADS)

Karmazikov, Y. V.; Fainberg, E. M.

2005-06-01

Work with DICOM compatible equipment integrated into hardware and software systems for medical purposes has been considered. Structures of process of reception and translormation of the data are resulted by the example of digital rentgenography and angiography systems, included in hardware-software complex DIMOL-IK. Algorithms of reception and the analysis of the data are offered. Questions of the further processing and storage of the received data are considered.

Stochastic Analysis and Applied Probability(3.3.1): Topics in the Theory and Applications of Stochastic Analysis

DTIC Science & Technology

2015-08-13

is due to Reiman [36] who considered the case where the arrivals and services are mutually independent renewal processes with square integrable summands...to a reflected diffusion process with drift and diffusion coefficients that depend on the state of the process. In models considered in works of Reiman ...the infinity Laplacian. Jour. AMS, to appear [36] M. I. Reiman . Open queueing networks in heavy traffic. Mathematics of Operations Research, 9(3): 441

Demonstration of emulator-based Bayesian calibration of safety analysis codes: Theory and formulation

DOE PAGES

Yurko, Joseph P.; Buongiorno, Jacopo; Youngblood, Robert

2015-05-28

System codes for simulation of safety performance of nuclear plants may contain parameters whose values are not known very accurately. New information from tests or operating experience is incorporated into safety codes by a process known as calibration, which reduces uncertainty in the output of the code and thereby improves its support for decision-making. The work reported here implements several improvements on classic calibration techniques afforded by modern analysis techniques. The key innovation has come from development of code surrogate model (or code emulator) construction and prediction algorithms. Use of a fast emulator makes the calibration processes used here withmore » Markov Chain Monte Carlo (MCMC) sampling feasible. This study uses Gaussian Process (GP) based emulators, which have been used previously to emulate computer codes in the nuclear field. The present work describes the formulation of an emulator that incorporates GPs into a factor analysis-type or pattern recognition-type model. This “function factorization” Gaussian Process (FFGP) model allows overcoming limitations present in standard GP emulators, thereby improving both accuracy and speed of the emulator-based calibration process. Calibration of a friction-factor example using a Method of Manufactured Solution is performed to illustrate key properties of the FFGP based process.« less

Graphics Processing Unit Assisted Thermographic Compositing

NASA Technical Reports Server (NTRS)

Ragasa, Scott; McDougal, Matthew; Russell, Sam

2012-01-01

Objective: To develop a software application utilizing general purpose graphics processing units (GPUs) for the analysis of large sets of thermographic data. Background: Over the past few years, an increasing effort among scientists and engineers to utilize the GPU in a more general purpose fashion is allowing for supercomputer level results at individual workstations. As data sets grow, the methods to work them grow at an equal, and often great, pace. Certain common computations can take advantage of the massively parallel and optimized hardware constructs of the GPU to allow for throughput that was previously reserved for compute clusters. These common computations have high degrees of data parallelism, that is, they are the same computation applied to a large set of data where the result does not depend on other data elements. Signal (image) processing is one area were GPUs are being used to greatly increase the performance of certain algorithms and analysis techniques. Technical Methodology/Approach: Apply massively parallel algorithms and data structures to the specific analysis requirements presented when working with thermographic data sets.

An application of Six Sigma methodology to turnover intentions in health care.

PubMed

Taner, Mehmet

2009-01-01

The purpose of this study is to show how the principles of Six Sigma can be applied to the high turnover problem of doctors in medical emergency services and paramedic backup. Six Sigma's define-measure-analyse-improve-control (DMAIC) is applied for reducing the turnover rate of doctors in an organisation operating in emergency services. Variables of the model are determined. Explanatory factor analysis, multiple regression, analysis of variance (ANOVA) and Gage R&R are employed for the analysis. Personal burnout/stress and dissatisfaction from salary were found to be the "vital few" variables. The organisation took a new approach by improving its initiatives to doctors' working conditions. Sigma level of the process is increased. New policy and process changes have been found to effectively decrease the incidence of turnover intentions. The improved process is gained, standardised and institutionalised. This study is one of the few papers in the literature that elaborates the turnover problem of doctors working in the emergency and paramedic backup services.

[The aging process and work: a case study in the maintenance engineering division of a public hospital in the city of São Paulo, Brazil].

PubMed

Sato, Andrea Toshye; Barros, Juliana de Oliveira; Jardim, Tatiana de Andrade; Ratier, Ana Paula Pelegrini; Lancman, Selma

2017-11-06

This study aimed to identify and analyze the relations between aging and work. This was a case study in the maintenance engineering division of a high-complexity hospital in the city of São Paulo, Brazil. In September and October 2015, 16 semi-structured interviews were held with the division heads and other workers with a minimum age of 50 years. The data were analyzed with thematic content analysis. Although the workers experienced difficulties resulting from the aging process, these did not prevent them from performing their work activities, since they developed strategies through their knowhow to compensate for their functional losses and/or declines. Still, they felt limited and demotivated due to the poor working conditions, outsourcing of the division, and the prevailing workload organization. Thus, in this division, the working conditions and organization had more impact than the aging process on the individuals' daily work routine.

Automated Hazard Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riddle, F. J.

2003-06-26

The Automated Hazard Analysis (AHA) application is a software tool used to conduct job hazard screening and analysis of tasks to be performed in Savannah River Site facilities. The AHA application provides a systematic approach to the assessment of safety and environmental hazards associated with specific tasks, and the identification of controls regulations, and other requirements needed to perform those tasks safely. AHA is to be integrated into existing Savannah River site work control and job hazard analysis processes. Utilization of AHA will improve the consistency and completeness of hazard screening and analysis, and increase the effectiveness of the workmore » planning process.« less

Magnesium-Aluminum-Zirconium Oxide Amorphous Ternary Composite: A Dense and Stable Optical Coating

NASA Technical Reports Server (NTRS)

Sahoo, N. K.; Shapiro, A. P.

1998-01-01

In the present work, the process parameter dependent optical and structural properties of MgO-Al(2)O(3)-ZrO(2) ternary mixed-composite material have been investigated. Optical properties were derived from spectrophotometric measurements. The surface morphology, grain size distributions, crystallographic phases and process dependent material composition of films have been investigated through the use of Atomic Force Microscopy (AFM), X-ray diffraction analysis and Energy Dispersive X- ray (EDX) analysis. EDX analysis made evident the correlation between the optical constants and the process dependent compositions in the films. It is possible to achieve environmentally stable amorphous films with high packing density under certain optimized process conditions.

Performance of an image analysis processing system for hen tracking in an environmental preference chamber.

PubMed

Kashiha, Mohammad Amin; Green, Angela R; Sales, Tatiana Glogerley; Bahr, Claudia; Berckmans, Daniel; Gates, Richard S

2014-10-01

Image processing systems have been widely used in monitoring livestock for many applications, including identification, tracking, behavior analysis, occupancy rates, and activity calculations. The primary goal of this work was to quantify image processing performance when monitoring laying hens by comparing length of stay in each compartment as detected by the image processing system with the actual occurrences registered by human observations. In this work, an image processing system was implemented and evaluated for use in an environmental animal preference chamber to detect hen navigation between 4 compartments of the chamber. One camera was installed above each compartment to produce top-view images of the whole compartment. An ellipse-fitting model was applied to captured images to detect whether the hen was present in a compartment. During a choice-test study, mean ± SD success detection rates of 95.9 ± 2.6% were achieved when considering total duration of compartment occupancy. These results suggest that the image processing system is currently suitable for determining the response measures for assessing environmental choices. Moreover, the image processing system offered a comprehensive analysis of occupancy while substantially reducing data processing time compared with the time-intensive alternative of manual video analysis. The above technique was used to monitor ammonia aversion in the chamber. As a preliminary pilot study, different levels of ammonia were applied to different compartments while hens were allowed to navigate between compartments. Using the automated monitor tool to assess occupancy, a negative trend of compartment occupancy with ammonia level was revealed, though further examination is needed. ©2014 Poultry Science Association Inc.

GOCI Level-2 Processing Improvements and Cloud Motion Analysis

NASA Technical Reports Server (NTRS)

Robinson, Wayne D.

2015-01-01

The Ocean Biology Processing Group has been working with the Korean Institute of Ocean Science and Technology (KIOST) to process geosynchronous ocean color data from the GOCI (Geostationary Ocean Color Instrument) aboard the COMS (Communications, Ocean and Meteorological Satellite). The level-2 processing program, l2gen has GOCI processing as an option. Improvements made to that processing are discussed here as well as a discussion about cloud motion effects.

Xylo-Oligosaccharide Process Development, Composition, and Techno-Economic Analysis. Cooperative Research and Development Final Report, CRADA Number CRD-12-483

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shekiro, Joe; Elander, Richard

2015-12-01

The purpose of this cooperative work agreement between General Mills Inc. (GMI) and NREL is to determine the feasibility of producing a valuable food ingredient (xylo-oligosaccharides or XOS), a highly soluble fiber material, from agricultural waste streams, at an advantaged cost level relative to similar existing ingredients. The scope of the project includes pilot-scale process development (Task 1), compositional analysis (Task 2), and techno-economic analysis (Task 3).

Working Performance Analysis of Rolling Bearings Used in Mining Electric Excavator Crowd Reducer

NASA Astrophysics Data System (ADS)

Zhang, Y. H.; Hou, G.; Chen, G.; Liang, J. F.; Zheng, Y. M.

2017-12-01

Refer to the statistical load data of digging process, on the basis of simulation analysis of crowd reducer system dynamics, the working performance simulation analysis of rolling bearings used in crowd reducer of large mining electric excavator is completed. The contents of simulation analysis include analysis of internal load distribution, rolling elements contact stresses and rolling bearing fatigue life. The internal load characteristics of rolling elements in cylindrical roller bearings are obtained. The results of this study identified that all rolling bearings satisfy the requirements of contact strength and fatigue life. The rationality of bearings selection and arrangement is also verified.

Gender differences in working memory networks: A BrainMap meta-analysis

PubMed Central

Hill, Ashley C.; Laird, Angela R.; Robinson, Jennifer L.

2014-01-01

Gender differences in psychological processes have been of great interest in a variety of fields. While the majority of research in this area has focused on specific differences in relation to test performance, this study sought to determine the underlying neurofunctional differences observed during working memory, a pivotal cognitive process shown to be predictive of academic achievement and intelligence. Using the BrainMap database, we performed a meta-analysis and applied activation likelihood estimation to our search set. Our results demonstrate consistent working memory networks across genders, but also provide evidence for gender-specific networks whereby females consistently activate more limbic (e.g., amygdala and hippocampus) and prefrontal structures (e.g., right inferior frontal gyrus), and males activate a distributed network inclusive of more parietal regions. These data provide a framework for future investigation using functional or effective connectivity methods to elucidate the underpinnings of gender differences in neural network recruitment during working memory tasks. PMID:25042764

Gender differences in working memory networks: a BrainMap meta-analysis.

PubMed

Hill, Ashley C; Laird, Angela R; Robinson, Jennifer L

2014-10-01

Gender differences in psychological processes have been of great interest in a variety of fields. While the majority of research in this area has focused on specific differences in relation to test performance, this study sought to determine the underlying neurofunctional differences observed during working memory, a pivotal cognitive process shown to be predictive of academic achievement and intelligence. Using the BrainMap database, we performed a meta-analysis and applied activation likelihood estimation to our search set. Our results demonstrate consistent working memory networks across genders, but also provide evidence for gender-specific networks whereby females consistently activate more limbic (e.g., amygdala and hippocampus) and prefrontal structures (e.g., right inferior frontal gyrus), and males activate a distributed network inclusive of more parietal regions. These data provide a framework for future investigations using functional or effective connectivity methods to elucidate the underpinnings of gender differences in neural network recruitment during working memory tasks. Copyright © 2014 Elsevier B.V. All rights reserved.

Knowledge work productivity effect on quality of knowledge work in software development process in SME

NASA Astrophysics Data System (ADS)

Yusoff, Mohd Zairol; Mahmuddin, Massudi; Ahmad, Mazida

2016-08-01

Knowledge and skill are necessary to develop the capability of knowledge workers. However, there is very little understanding of what the necessary knowledge work (KW) is, and how they influence the quality of knowledge work or knowledge work productivity (KWP) in software development process, including that in small and medium-sized (SME) enterprise. The SME constitutes a major part of the economy and it has been relatively unsuccessful in developing KWP. Accordingly, this paper seeks to explore the influencing dimensions of KWP that effect on the quality of KW in SME environment. First, based on the analysis of the existing literatures, the key characteristics of KW productivity are defined. Second, the conceptual model is proposed, which explores the dimensions of the KWP and its quality. This study analyses data collected from 150 respondents (based on [1], who involve in SME in Malaysia and validates the models by using structural equation modeling (SEM). The results provide an analysis of the effect of KWP on the quality of KW and business success, and have a significant relevance for both research and practice in the SME

The concept of value stream mapping to reduce of work-time waste as applied the smart construction management

NASA Astrophysics Data System (ADS)

Elizar, Suripin, Wibowo, Mochamad Agung

2017-11-01

Delays in construction sites occur due to systematic additions of time waste in various activities that are part of the construction process. Work-time waste is non-adding value activity which used to differentiate between physical construction waste found on site and other waste which occurs during the construction process. The aim of this study is identification using the concept of Value Stream Mapping (VSM) to reduce of work-time waste as applied the smart construction management.VSM analysis is a method of business process improvement. The application of VSM began in the manufacturing community. The research method base on theoretically informed case study and literature review. The data have collected using questionnaire through personal interviews from 383 respondents on construction project in Indonesia. The results show that concept of VSM can identify causes of work-time waste. Base on result of questioners and quantitative approach analysis was obtained 29 variables that influence of work-time waste or non-value-adding activities. Base on three cases of construction project founded that average 14.88% of working time was classified as waste. Finally, the concept of VSM can recommend to identification of systematic for reveal current practices and opportunities for improvement towards global challenges. The concept of value stream mapping can help optimize to reduce work-time waste and improve quality standard of construction management. The concept is also can help manager to make a decision to reduce work-time waste so as to obtain of result in more efficient for performance and sustainable construction project.

Dual Analyses Examining Proving Process: Grounded Theory and Knowledge Analysis

ERIC Educational Resources Information Center

Adiredja, Aditya P.; Smith Karunakaran, Shiv

2016-01-01

This report presents dual analyses of an undergraduate student, Cassie, whose work provides nice contrasts between Grounded Theory (GT) analysis and Knowledge Analysis (KA). The analyses highlight particular methodological differences, such as grain size of findings, positioning of novices and more general implications about expert-novice studies.…

A Narrative Analysis of a Teacher Educator's Professional Learning Journey

ERIC Educational Resources Information Center

Vanassche, Eline; Kelchtermans, Geert

2016-01-01

This article reports on a narrative analysis of one teacher educator's learning journey in a two-year professional development project. Professional development is conceived of as the complex learning processes resulting from the meaningful interactions between the individual teacher educator and his/her working context. Our analysis indicates…

Cue Representation and Situational Awareness in Task Analysis

ERIC Educational Resources Information Center

Carl, Diana R.

2009-01-01

Task analysis in human performance technology is used to determine how human performance can be well supported with training, job aids, environmental changes, and other interventions. Early work by Miller (1953) and Gilbert (1969, 1974) addressed cue processing in task execution and recommended cue descriptions in task analysis. Modern task…

Child versus adult psychoanalysis: two processes or one?

PubMed

Sugarman, Alan

2009-12-01

Child analysis continues to be seen as a different technique from adult analysis because children are still involved in a developmental process and because the primary objects continue to play active roles in their lives. This paper argues that this is a false dichotomy. An extended vignette of the analysis of a latency-aged girl is used to demonstrate that the psychoanalytic process that develops in child analysis is structurally the same as that in adult analysis. Both revolve around the analysis of resistance and transference and use both to promote knowledge of the patient's mind at work. And both techniques formulate interventions based on the analyst's appraisal of the patient's mental organization. It is hoped that stressing the essential commonality of both techniques will promote the development of an overarching theory of psychoanalytic technique.

The Architecture, Dynamics, and Development of Mental Processing: Greek, Chinese, or Universal?

ERIC Educational Resources Information Center

Demetriou, A.; Kui, Z.X.; Spanoudis, G.; Christou, C.; Kyriakides, L.; Platsidou, M.

2005-01-01

This study compared Greeks with Chinese, from 8 to 14 years of age, on measures of processing efficiency, working memory, and reasoning. All processes were addressed through three domains of relations: verbal/propositional, quantitative, and visuo/spatial. Structural equations modelling and rating scale analysis showed that the architecture and…

Social Support, Motivation, and the Process of Juvenile Reentry: An Exploratory Analysis of Desistance

ERIC Educational Resources Information Center

Panuccio, Elizabeth A.; Christian, Johnna; Martinez, Damian J.; Sullivan, Mercer L.

2012-01-01

Many scholarly works and studies have explored the experience of reentry and desistance for adult offenders, but fewer studies have focused on these processes among juvenile offenders. Using qualitative case studies of juveniles released from secure confinement, this study explores the desistance process during juvenile reentry by examining how…

Error Analysis Of Students Working About Word Problem Of Linear Program With NEA Procedure

NASA Astrophysics Data System (ADS)

Santoso, D. A.; Farid, A.; Ulum, B.

2017-06-01

Evaluation and assessment is an important part of learning. In evaluation process of learning, written test is still commonly used. However, the tests usually do not following-up by further evaluation. The process only up to grading stage not to evaluate the process and errors which done by students. Whereas if the student has a pattern error and process error, actions taken can be more focused on the fault and why is that happen. NEA procedure provides a way for educators to evaluate student progress more comprehensively. In this study, students’ mistakes in working on some word problem about linear programming have been analyzed. As a result, mistakes are often made students exist in the modeling phase (transformation) and process skills (process skill) with the overall percentage distribution respectively 20% and 15%. According to the observations, these errors occur most commonly due to lack of precision of students in modeling and in hastiness calculation. Error analysis with students on this matter, it is expected educators can determine or use the right way to solve it in the next lesson.

[Automation and organization of technological process of urinalysis].

PubMed

Kolenkin, S M; Kishkun, A A; Kol'chenko, O L

2000-12-01

Results of introduction into practice of a working model of industrial technology of laboratory studies and KONE Specific Supra and Miditron M devices are shown as exemplified by clinical analysis of the urine. This technology helps standardize all stages and operations, improves the efficiency of quality control of laboratory studies, rationally organizes the work at all stages of the process, creates a system for permanent improvement of the efficiency of investigations at the preanalytical, analytical, and postanalytical stages of technological process of laboratory studies. As a result of introduction of this technology into laboratory practice, violations of quality criteria of clinical urinalysis decreased from 15 to 8% at the preanalytical stage and from 6 to 3% at the analytical stage. Automation of the analysis decreased the need in reagents 3-fold and improved the productivity at the analytical stage 4-fold.

A Theoretical Analysis of Thermal Radiation from Neutron Stars

NASA Technical Reports Server (NTRS)

Applegate, James H.

1993-01-01

As soon as it was realized that the direct URCA process is allowed by many modern nuclear equation of state, an analysis of its effect on the cooling of neutron stars was undertaken. A primary study showed that the occurrence of the direct URCA process makes the surface temperature of a neutron star suddenly drop by almost an order of magnitude when the cold wave from the core reaches the surface when the star is a few years old. The results of this study are published in Page and Applegate. As a work in progress, we are presently extending the above work. Improved expressions for the effect of nucleon pairing on the neutrino emissivity and specific heat are now available, and we have incorporated them in a recalculation of rate of the direct URCA process.

Beyond a man's world: contributions from considering gender in the study of bus drivers' work activity.

PubMed

Cunha, Liliana; Nogueira, Sónia; Lacomblez, Marianne

2014-01-01

Bus driving is a typically male occupation undergoing a process of feminization. Although men remain a majority, women's integration has raised some questions, namely, related to work organization or its impact on health. This paper focuses on the contributions of assuming a gender perspective in the analysis of the bus driving occupation and the conditions under which it is performed. Twenty female and 158 male bus drivers. Qualitative and quantitative approaches were combined. Ergonomic work analysis and individual interviews were used, as well as INSAT (Work and Health Questionnaire). Difficulties inherent to the work activity were highlighted, in terms of working hours and management of "peripheral tasks", with implications for the balance between professional and personal life. These difficulties were reported differently by men and women, although both made themselves clear about the impact on their career and health. Taking gender into consideration has enabled an enrichment of the questions that guide the analysis of this work activity, and contributed to a new perspective on the work performed by this occupational group as well as a new approach to study the history of the transport industry by proposing as focus of analysis issues related to "gender mobility".

Will the future of knowledge work automation transform personalized medicine?

PubMed

Naik, Gauri; Bhide, Sanika S

2014-09-01

Today, we live in a world of 'information overload' which demands high level of knowledge-based work. However, advances in computer hardware and software have opened possibilities to automate 'routine cognitive tasks' for knowledge processing. Engineering intelligent software systems that can process large data sets using unstructured commands and subtle judgments and have the ability to learn 'on the fly' are a significant step towards automation of knowledge work. The applications of this technology for high throughput genomic analysis, database updating, reporting clinically significant variants, and diagnostic imaging purposes are explored using case studies.

[Proposal of a method for collective analysis of work-related accidents in the hospital setting].

PubMed

Osório, Claudia; Machado, Jorge Mesquita Huet; Minayo-Gomez, Carlos

2005-01-01

The article presents a method for the analysis of work-related accidents in hospitals, with the double aim of analyzing accidents in light of actual work activity and enhancing the vitality of the various professions that comprise hospital work. This process involves both research and intervention, combining knowledge output with training of health professionals, fostering expanded participation by workers in managing their daily work. The method consists of stimulating workers to recreate the situation in which a given accident occurred, shifting themselves to the position of observers of their own work. In the first stage of analysis, workers are asked to show the work analyst how the accident occurred; in the second stage, the work accident victim and analyst jointly record the described series of events in a diagram; in the third, the resulting record is re-discussed and further elaborated; in the fourth, the work accident victim and analyst evaluate and implement measures aimed to prevent the accident from recurring. The article concludes by discussing the method's possibilities and limitations in the hospital setting.

Dimeric spectra analysis in Microsoft Excel: a comparative study.

PubMed

Gilani, A Ghanadzadeh; Moghadam, M; Zakerhamidi, M S

2011-11-01

The purpose of this work is to introduce the reader to an Add-in implementation, Decom. This implementation provides the whole processing requirements for analysis of dimeric spectra. General linear and nonlinear decomposition algorithms were integrated as an Excel Add-in for easy installation and usage. In this work, the results of several samples investigations were compared to those obtained by Datan. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

The Cluster Analysis of Jobs Based on Data from the Position Analysis Questionnaire (PAQ). Report No. 7.

ERIC Educational Resources Information Center

DeNisi, Angelo S.; McCormick, Ernest J.

The Position Analysis Questionnaire (PAQ) is a structured job analysis procedure that provides for the analysis of jobs in terms of each of 187 job elements, these job elements being grouped into six divisions: information input, mental processes, work output, relationships with other persons, job context, and other job characteristics. Two…

Fluidized-bed copper oxide process. Phase IV. Conceptual design and economic evaluation, Volume I. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-11-30

Universal Oil Products, Inc. (UOP) of Des Plaines, Illinois has contracted A.E. Roberts & Associates, Inc. (AERA) of Atlanta, Georgia to prepare a sensitivity analysis for the development of the Fluidized-bed Copper Oxide (FBCO) process. As proposed by AERA in September 1991, development of the FBCO process design for a 500 mega-watt (MW) unit was divided into three tasks: (1) Establishment of a Conceptual Design, (2) Conceptual Design, (3) Cost Analysis Task 1 determined the basis for a conceptual design for the 500 megawatt (MW) FBCO process. It was completed by AERA in September of 1992, and a report wasmore » submitted at that time {open_quotes}Establishment of the Design Basis for Application to a 500 MW Coal-fired Facility.{close_quotes} Task 2 gathered all pertinent data available to date and reviewed its applicability to the 500 MW FBCO process. Work on this task was carried out on a joint basis by the AERA team members: Roberts & Schaefers worked on the dense phase transport aspect of the design; Cornell and Carnegie Mellon Universities worked on the design kinetics and modeling; and AERA contributed commercial power and combustion experience. Task 3 provides budgetary cost estimates for the FBCO process and competing alternative technologies for sulfur dioxide and nitrogen oxide removal.« less

The Effects of Gender on Group Work Process and Achievement: An Analysis through Self- and Peer-Assessment

ERIC Educational Resources Information Center

Takeda, Sachiko; Homberg, Fabian

2014-01-01

The importance of teamwork skills as part of employability has been widely acknowledged and accompanied by active research on successful cooperative learning. However, relatively few studies have focused on the effects of gender on students' group work, and only a limited number of empirical studies exist that examine students' group work process…

Meaningful Solutions for the Unemployed or Their Counsellors? The Role of Case Managers' Conceptions of Their Work

ERIC Educational Resources Information Center

Värk, Aare; Reino, Anne

2018-01-01

This article reports the outcomes of a phenomenographical study of case managers' conceptions of case management work and its influence on the process and performance of the work of counselling the unemployed. A heterogeneous sample of 11 Estonian case managers was selected for in-depth interviews. Analysis of the interviews revealed three…

Desire, longing and vanity: emotions behind successful return to work for women on long-term sick leave.

PubMed

Ahrberg, Y; Landstad, B J; Bergroth, A; Ekholm, J

2010-01-01

The purpose of this study is to identify situations and phenomena that have simplified returning to work for women on long-term sick leave. Seven women who were exposed to a relatively large number of risk factors that normally are associated with difficulties in returning to work. In-depth interviews with qualitative content analysis. The analysis indicated four main categories of factors: The Individual, Interactions, Surrounding Resources, and Situations. In each of the main categories structural factors exist and it appears that these have been of significant importance to the women in their return to work. These are presented as Key Factors and they are: clarification of--and the need for--support in the personal process of change; desire, longing, and vanity; respectful interactions between the individual and people in her surroundings; the structure and content of the rehabilitation clinic; the importance of the perceived reality; and the individual's sense of control during the work related rehabilitation process. The results mostly revealed phenomena that have been indicated and described in earlier research studies. However, emotions such as desire, longing and vanity as motivation and driving forces behind a return to work have not been earlier described.

[Pleasure in nursing technicians working at an emergency unit of a public university hospital].

PubMed

Garcia, Alessandra Bassalobre; Dellaroza, Mara Solange Gomes; Haddad, Maria do Carmo Lourenço; Pachemshy, Luiza Rita

2012-06-01

This study aimed to reveal the main aspects of the work process and feelings of pleasure experienced by nursing technicians who work at an emergency unit in Paraná, Brazil. The theoretical basis is the psychodynamics of work. This is a qualitative and descriptive study. Data were collected and analyzed using a semi-structured interview and the content analysis technique. Subjects were selected using a snowball sampling. Important aspects of the work process were revealed such as the unpredictability of working in an emergency unit, the impact of team work, and the comprehensive care model as a precursor to humanized care. Pleasure originates from the acknowledgement of their work either by the working subject him/herself by patients or society; and from the team work, realized by the cooperation among professionals. Feelings of pleasure are linked to the acknowledgment of their work, which should be valued since gratification contributes to the psychological health of workers.

Contingency Analysis Post-Processing With Advanced Computing and Visualization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yousu; Glaesemann, Kurt; Fitzhenry, Erin

Contingency analysis is a critical function widely used in energy management systems to assess the impact of power system component failures. Its outputs are important for power system operation for improved situational awareness, power system planning studies, and power market operations. With the increased complexity of power system modeling and simulation caused by increased energy production and demand, the penetration of renewable energy and fast deployment of smart grid devices, and the trend of operating grids closer to their capacity for better efficiency, more and more contingencies must be executed and analyzed quickly in order to ensure grid reliability andmore » accuracy for the power market. Currently, many researchers have proposed different techniques to accelerate the computational speed of contingency analysis, but not much work has been published on how to post-process the large amount of contingency outputs quickly. This paper proposes a parallel post-processing function that can analyze contingency analysis outputs faster and display them in a web-based visualization tool to help power engineers improve their work efficiency by fast information digestion. Case studies using an ESCA-60 bus system and a WECC planning system are presented to demonstrate the functionality of the parallel post-processing technique and the web-based visualization tool.« less

Discrete-Time Demodulator Architectures for Free-Space Broadband Optical Pulse-Position Modulation

NASA Technical Reports Server (NTRS)

Gray, A. A.; Lee, C.

2004-01-01

The objective of this work is to develop discrete-time demodulator architectures for broadband optical pulse-position modulation (PPM) that are capable of processing Nyquist or near-Nyquist data rates. These architectures are motivated by the numerous advantages of realizing communications demodulators in digital very large scale integrated (VLSI) circuits. The architectures are developed within a framework that encompasses a large body of work in optical communications, synchronization, and multirate discrete-time signal processing and are constrained by the limitations of the state of the art in digital hardware. This work attempts to create a bridge between theoretical communication algorithms and analysis for deep-space optical PPM and modern digital VLSI. The primary focus of this work is on the synthesis of discrete-time processing architectures for accomplishing the most fundamental functions required in PPM demodulators, post-detection filtering, synchronization, and decision processing. The architectures derived are capable of closely approximating the theoretical performance of the continuous-time algorithms from which they are derived. The work concludes with an outline of the development path that leads to hardware.

EPA's Use of Benefit-Cost Analysis: 1981-1986 (1987)

EPA Pesticide Factsheets

This report describes the contributions that benefit-cost analysis has made to EPA's regulatory process, the various statutory provisions that affect EPA's use of these analyses in regulatory decision making, and how EPA is working to improve its analyses.

Root Cause Analysis of Quality Defects Using HPLC-MS Fingerprint Knowledgebase for Batch-to-batch Quality Control of Herbal Drugs.

PubMed

Yan, Binjun; Fang, Zhonghua; Shen, Lijuan; Qu, Haibin

2015-01-01

The batch-to-batch quality consistency of herbal drugs has always been an important issue. To propose a methodology for batch-to-batch quality control based on HPLC-MS fingerprints and process knowledgebase. The extraction process of Compound E-jiao Oral Liquid was taken as a case study. After establishing the HPLC-MS fingerprint analysis method, the fingerprints of the extract solutions produced under normal and abnormal operation conditions were obtained. Multivariate statistical models were built for fault detection and a discriminant analysis model was built using the probabilistic discriminant partial-least-squares method for fault diagnosis. Based on multivariate statistical analysis, process knowledge was acquired and the cause-effect relationship between process deviations and quality defects was revealed. The quality defects were detected successfully by multivariate statistical control charts and the type of process deviations were diagnosed correctly by discriminant analysis. This work has demonstrated the benefits of combining HPLC-MS fingerprints, process knowledge and multivariate analysis for the quality control of herbal drugs. Copyright © 2015 John Wiley & Sons, Ltd.

When paradigms collide at the road rail interface: evaluation of a sociotechnical systems theory design toolkit for cognitive work analysis.

PubMed

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G

2016-09-01

The Cognitive Work Analysis Design Toolkit (CWA-DT) is a recently developed approach that provides guidance and tools to assist in applying the outputs of CWA to design processes to incorporate the values and principles of sociotechnical systems theory. In this paper, the CWA-DT is evaluated based on an application to improve safety at rail level crossings. The evaluation considered the extent to which the CWA-DT met pre-defined methodological criteria and aligned with sociotechnical values and principles. Both process and outcome measures were taken based on the ratings of workshop participants and human factors experts. Overall, workshop participants were positive about the process and indicated that it met the methodological criteria and sociotechnical values. However, expert ratings suggested that the CWA-DT achieved only limited success in producing RLX designs that fully aligned with the sociotechnical approach. Discussion about the appropriateness of the sociotechnical approach in a public safety context is provided. Practitioner Summary: Human factors and ergonomics practitioners need evidence of the effectiveness of methods. A design toolkit for cognitive work analysis, incorporating values and principles from sociotechnical systems theory, was applied to create innovative designs for rail level crossings. Evaluation results based on the application are provided and discussed.

Employer, use of personal protective equipment, and work safety climate: Latino poultry processing workers.

PubMed

Arcury, Thomas A; Grzywacz, Joseph G; Anderson, Andrea M; Mora, Dana C; Carrillo, Lourdes; Chen, Haiying; Quandt, Sara A

2013-02-01

This analysis describes the work safety climate of Latino poultry processing workers and notes differences by worker personal characteristics and employer; describes the use of common personal protective equipment (PPE) among workers; and examines the associations of work safety climate with use of common PPE. Data are from a cross-sectional study of 403 Latino poultry processing workers in western North Carolina. Work safety climate differed little by personal characteristics, but it did differ consistently by employer. Provision of PPE varied; for example, 27.2% of participants were provide with eye protection at no cost, 57.0% were provided with hand protection at no cost, and 84.7% were provided with protective clothing at no cost. PPE use varied by type. Provision of PPE at no cost was associated with lower work safety climate; this result was counter-intuitive. Consistent use of PPE was associated with higher work safety climate. Work safety climate is important for improving workplace safety for immigrant workers. Research among immigrant workers should document work safety climate for different employers and industries, and delineate how work safety climate affects safety behavior and injuries. Copyright © 2012 Wiley Periodicals, Inc.

Demodulation processes in auditory perception

NASA Astrophysics Data System (ADS)

Feth, Lawrence L.

1994-08-01

The long range goal of this project is the understanding of human auditory processing of information conveyed by complex, time-varying signals such as speech, music or important environmental sounds. Our work is guided by the assumption that human auditory communication is a 'modulation - demodulation' process. That is, we assume that sound sources produce a complex stream of sound pressure waves with information encoded as variations ( modulations) of the signal amplitude and frequency. The listeners task then is one of demodulation. Much of past. psychoacoustics work has been based in what we characterize as 'spectrum picture processing.' Complex sounds are Fourier analyzed to produce an amplitude-by-frequency 'picture' and the perception process is modeled as if the listener were analyzing the spectral picture. This approach leads to studies such as 'profile analysis' and the power-spectrum model of masking. Our approach leads us to investigate time-varying, complex sounds. We refer to them as dynamic signals and we have developed auditory signal processing models to help guide our experimental work.

Quantifiable and objective approach to organizational performance enhancement.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholand, Andrew Joseph; Tausczik, Yla R.

This report describes a new methodology, social language network analysis (SLNA), that combines tools from social language processing and network analysis to identify socially situated relationships between individuals which, though subtle, are highly influential. Specifically, SLNA aims to identify and characterize the nature of working relationships by processing artifacts generated with computer-mediated communication systems, such as instant message texts or emails. Because social language processing is able to identify psychological, social, and emotional processes that individuals are not able to fully mask, social language network analysis can clarify and highlight complex interdependencies between group members, even when these relationships aremore » latent or unrecognized. This report outlines the philosophical antecedents of SLNA, the mechanics of preprocessing, processing, and post-processing stages, and some example results obtained by applying this approach to a 15-month corporate discussion archive.« less

Sample treatments prior to capillary electrophoresis-mass spectrometry.

PubMed

Hernández-Borges, Javier; Borges-Miquel, Teresa M; Rodríguez-Delgado, Miguel Angel; Cifuentes, Alejandro

2007-06-15

Sample preparation is a crucial part of chemical analysis and in most cases can become the bottleneck of the whole analytical process. Its adequacy is a key factor in determining the success of the analysis and, therefore, careful selection and optimization of the parameters controlling sample treatment should be carried out. This work revises the different strategies that have been developed for sample preparation prior to capillary electrophoresis-mass spectrometry (CE-MS). Namely the present work presents an exhaustive and critical revision of the different samples treatments used together with on-line CE-MS including works published from January 2000 to July 2006.

PCM-SABRE: a platform for benchmarking and comparing outcome prediction methods in precision cancer medicine.

PubMed

Eyal-Altman, Noah; Last, Mark; Rubin, Eitan

2017-01-17

Numerous publications attempt to predict cancer survival outcome from gene expression data using machine-learning methods. A direct comparison of these works is challenging for the following reasons: (1) inconsistent measures used to evaluate the performance of different models, and (2) incomplete specification of critical stages in the process of knowledge discovery. There is a need for a platform that would allow researchers to replicate previous works and to test the impact of changes in the knowledge discovery process on the accuracy of the induced models. We developed the PCM-SABRE platform, which supports the entire knowledge discovery process for cancer outcome analysis. PCM-SABRE was developed using KNIME. By using PCM-SABRE to reproduce the results of previously published works on breast cancer survival, we define a baseline for evaluating future attempts to predict cancer outcome with machine learning. We used PCM-SABRE to replicate previous work that describe predictive models of breast cancer recurrence, and tested the performance of all possible combinations of feature selection methods and data mining algorithms that was used in either of the works. We reconstructed the work of Chou et al. observing similar trends - superior performance of Probabilistic Neural Network (PNN) and logistic regression (LR) algorithms and inconclusive impact of feature pre-selection with the decision tree algorithm on subsequent analysis. PCM-SABRE is a software tool that provides an intuitive environment for rapid development of predictive models in cancer precision medicine.

Return to work and cancer: the Australian experience.

PubMed

McKay, Georgina; Knott, Vikki; Delfabbro, Paul

2013-03-01

Research suggests that for many cancer survivors, returning to work has a range of benefits. However, considerable barriers have been identified as influencing the quality of return to work outcomes. This study explored the perspectives of Australian cancer survivors, managers and employee assistance program (EAP) professionals to gain an understanding of the return to work process and factors that affect the experience. Focus groups and interviews were conducted with cancer survivors (n = 15), managers (n = 12), and EAP professionals / psychologists (n = 4) from public and private sectors. Thematic analysis was used to analyse the data to identify common and unique themes from the three participant groups. A range of drivers were identified including maintaining normality and regaining identity, which could act positively or negatively depending on survivors' coping ability and self awareness. Analysis revealed communication difficulties in the workplace that impact on emotional and practical support. Negotiating an employee's return is complex, influenced by the level of consultation with the employee and use of an ad hoc or structured process. Direct and indirect ways of supporting employees with cancer were identified, as was the need for colleague and manager support. This study supports previous research findings of the impact of cancer on work, and reveals managers' lack of knowledge on how to respond appropriately. The process of returning to work is complex, influenced by employees' and managers' attitudes, communication skills and coping abilities. Areas for workplace interventions to optimise support for the cancer survivor are described.

Does the process map influence the outcome of quality improvement work? A comparison of a sequential flow diagram and a hierarchical task analysis diagram.

PubMed

Colligan, Lacey; Anderson, Janet E; Potts, Henry W W; Berman, Jonathan

2010-01-07

Many quality and safety improvement methods in healthcare rely on a complete and accurate map of the process. Process mapping in healthcare is often achieved using a sequential flow diagram, but there is little guidance available in the literature about the most effective type of process map to use. Moreover there is evidence that the organisation of information in an external representation affects reasoning and decision making. This exploratory study examined whether the type of process map - sequential or hierarchical - affects healthcare practitioners' judgments. A sequential and a hierarchical process map of a community-based anti coagulation clinic were produced based on data obtained from interviews, talk-throughs, attendance at a training session and examination of protocols and policies. Clinic practitioners were asked to specify the parts of the process that they judged to contain quality and safety concerns. The process maps were then shown to them in counter-balanced order and they were asked to circle on the diagrams the parts of the process where they had the greatest quality and safety concerns. A structured interview was then conducted, in which they were asked about various aspects of the diagrams. Quality and safety concerns cited by practitioners differed depending on whether they were or were not looking at a process map, and whether they were looking at a sequential diagram or a hierarchical diagram. More concerns were identified using the hierarchical diagram compared with the sequential diagram and more concerns were identified in relation to clinical work than administrative work. Participants' preference for the sequential or hierarchical diagram depended on the context in which they would be using it. The difficulties of determining the boundaries for the analysis and the granularity required were highlighted. The results indicated that the layout of a process map does influence perceptions of quality and safety problems in a process. In quality improvement work it is important to carefully consider the type of process map to be used and to consider using more than one map to ensure that different aspects of the process are captured.

A model of adaptation of overseas nurses: exploring the experiences of Japanese nurses working in Australia.

PubMed

Kishi, Yuka; Inoue, Kumiyo; Crookes, Patrick; Shorten, Allison

2014-04-01

The purpose of the study was to investigate the experiences of Japanese nurses and their adaptation to their work environment in Australia. Using a qualitative research method and semistructured interviews, the study aimed to discover, describe, and analyze the experiences of 14 Japanese nurses participating in the study. A qualitative study. Fourteen Japanese registered nurses working in Australian hospitals participated in the study. Individual semistructured interviews were conducted from April to June in 2008. Thematic analysis was used to identify themes within the data. Analysis of qualitative open-ended questions revealed the participants' adaptation process. It consists of three themes or phases: seeking (S), acclimatizing (A), and settling (S), subsequently named the S.A.S. model. The conceptual model of the adaptation processes of 14 Japanese nurses working in Australia includes the seeking, acclimatizing, and settling phases. Although these phases are not mutually exclusive and the process is not necessarily uniformly linear, all participants in this study passed through this S.A.S. model in order to adapt to their new environment. The S.A.S. model of adaptation helps to describe the experiences of Japanese overseas qualified nurses working in Australian hospitals. Future research is needed to examine whether this model can be applied to nurses from other countries and in other settings outside Australia.

[Recovering helpers in the addiction treatment system in Hungary: an interpretative phenomenological analysis].

PubMed

Kassai, Szilvia; Pintér, Judit Nóra; Rácz, József

2015-01-01

The work of recovering helpers who work in the addiction rehabilitation centres was studied. The aim was to investigate the process of addicts becoming recovering helpers, and to study what peer help means to them. According to interpretative phenomenological analysis (IPA) design, subjects were selected, data were collected and analysed. 6 (5 males, 1 female), working as recovering helpers at least one year at addiction rehabilitation centres. Semi-structured life interviews were carried out and analysed according to IPA. Emerging themes from the interviews were identified and summarized, then interpreted as central themes: important periods and turning points of the life story interviews: the experience of psychoactive drugs use, the development of the addiction (which became " Turning Point No 1") then the "rock bottom" experience ("Turning Point No 2"). Then the experience of the helping process was examined: here four major themes were identified: the development of the recovering self and the helping self, the wounded helper and the skilled helper, the experience of the helping process. IPA was found to be a useful method for idiographic exploration of the development and the work of the recovering helpers. The work of the recovering helpers can be described as mentoring of the addict clients. Our experiences might be used for the training programs for recovering helpers as well as to adopt their professional role in addiction services.

A collaborative design method to support integrated care. An ICT development method containing continuous user validation improves the entire care process and the individual work situation

PubMed Central

Scandurra, Isabella; Hägglund, Maria

2009-01-01

Introduction Integrated care involves different professionals, belonging to different care provider organizations and requires immediate and ubiquitous access to patient-oriented information, supporting an integrated view on the care process [1]. Purpose To present a method for development of usable and work process-oriented information and communication technology (ICT) systems for integrated care. Theory and method Based on Human-computer Interaction Science and in particular Participatory Design [2], we present a new collaborative design method in the context of health information systems (HIS) development [3]. This method implies a thorough analysis of the entire interdisciplinary cooperative work and a transformation of the results into technical specifications, via user validated scenarios, prototypes and use cases, ultimately leading to the development of appropriate ICT for the variety of occurring work situations for different user groups, or professions, in integrated care. Results and conclusions Application of the method in homecare of the elderly resulted in an HIS that was well adapted to the intended user groups. Conducted in multi-disciplinary seminars, the method captured and validated user needs and system requirements for different professionals, work situations, and environments not only for current work; it also aimed to improve collaboration in future (ICT supported) work processes. A holistic view of the entire care process was obtained and supported through different views of the HIS for different user groups, resulting in improved work in the entire care process as well as for each collaborating profession [4].

Chemical structure of wood charcoal by infrared spectroscopy and multivariate analysis

Treesearch

Nicole Labbe; David Harper; Timothy Rials; Thomas Elder

2006-01-01

In this work, the effect of temperature on charcoal structure and chemical composition is investigated for four tree species. Wood charcoal carbonized at various temperatures is analyzed by mid infrared spectroscopy coupled with multivariate analysis and by thermogravimetric analysis to characterize the chemical composition during the carbonization process. The...

Interweaving Objects, Gestures, and Talk in Context

ERIC Educational Resources Information Center

Brassac, Christian; Fixmer, Pierre; Mondada, Lorenza; Vinck, Dominique

2008-01-01

In a large French hospital, a group of professional experts (including physicians and software engineers) are working on the computerization of a blood-transfusion traceability device. By focusing on a particular moment in this slow process of design, we analyze their collaborative practices during a work session. The analysis takes a…

Team Building [in HRD].

ERIC Educational Resources Information Center

1995

These five papers are from a symposium that was facilitated by Susan Dougherty at the 1995 conference of the Academy of Human Resource Development (HRD). "The Relationship between Productivity and Work Team Autonomy and Team Process Effectiveness" (Candice L. Phelan) reports that correlation analysis of results of a study of 21 work teams revealed…

How Nurses Experience Their Work as a Learning Environment

ERIC Educational Resources Information Center

Skår, Randi

2010-01-01

This article explores and illuminates the meaning of nurses' experiences with their work as a learning environment. A qualitative hermeneutic approach guided the research process and the analysis and interpretation of the transcribed interview-texts of eleven graduate nurses. Three core themes emerged from these informants' descriptions of their…

Work Integration of People with Disabilities in the Regular Labour Market: What Can We Do to Improve These Processes?

ERIC Educational Resources Information Center

Vila, Montserrat; Pallisera, Maria; Fullana, Judit

2007-01-01

Background: It is important to ensure that regular processes of labour market integration are available for all citizens. Method: Thematic content analysis techniques, using semi-structured group interviews, were used to identify the principal elements contributing to the processes of integrating people with disabilities into the regular labour…

Analysis of the control structures for an integrated ethanol processor for proton exchange membrane fuel cell systems

NASA Astrophysics Data System (ADS)

Biset, S.; Nieto Deglioumini, L.; Basualdo, M.; Garcia, V. M.; Serra, M.

The aim of this work is to investigate which would be a good preliminary plantwide control structure for the process of Hydrogen production from bioethanol to be used in a proton exchange membrane (PEM) accounting only steady-state information. The objective is to keep the process under optimal operation point, that is doing energy integration to achieve the maximum efficiency. Ethanol, produced from renewable feedstocks, feeds a fuel processor investigated for steam reforming, followed by high- and low-temperature shift reactors and preferential oxidation, which are coupled to a polymeric fuel cell. Applying steady-state simulation techniques and using thermodynamic models the performance of the complete system with two different control structures have been evaluated for the most typical perturbations. A sensitivity analysis for the key process variables together with the rigorous operability requirements for the fuel cell are taking into account for defining acceptable plantwide control structure. This is the first work showing an alternative control structure applied to this kind of process.

Production of furfural from pentosan-rich biomass: analysis of process parameters during simultaneous furfural stripping.

PubMed

Agirrezabal-Telleria, I; Gandarias, I; Arias, P L

2013-09-01

Among the furan-based compounds, furfural (FUR) shows interesting properties as building-block or industrial solvent. It is produced from pentosan-rich biomass via xylose cyclodehydration. The current FUR production makes use of homogeneous catalysts and excessive amounts of steam. The development of greener furfural production and separation techniques implies the use of heterogeneous catalysts and innovative separation processes. This work deals with the conversion of corncobs as xylose source to be dehydrated to furfural. The results reveal differences between the use of direct corncob hydrolysis and dehydration to furfural and the prehydrolysis and dehydration procedures. Moreover, this work focuses on an economical analysis of the main process parameters during N2-stripping and its economical comparison to the current steam-stripping process. The results show a considerable reduction of the annual utility costs due to use of recyclable nitrogen and the reduction of the furfural purification stages. Copyright © 2013 Elsevier Ltd. All rights reserved.

Automated processing of endoscopic surgical instruments.

PubMed

Roth, K; Sieber, J P; Schrimm, H; Heeg, P; Buess, G

1994-10-01

This paper deals with the requirements for automated processing of endoscopic surgical instruments. After a brief analysis of the current problems, solutions are discussed. Test-procedures have been developed to validate the automated processing, so that the cleaning results are guaranteed and reproducable. Also a device for testing and cleaning was designed together with Netzsch Newamatic and PCI, called TC-MIC, to automate processing and reduce manual work.

Manual for Transference Work Scale; a micro-analytical tool for therapy process analyses.

PubMed

Ulberg, Randi; Amlo, Svein; Høglend, Per

2014-11-18

The present paper is a manual for the Transference Work Scale (TWS). The inter-rater agreement on the 26 TWS items was good to excellent and previously published. TWS is a therapy process rating scale focusing on Transference Work (TW) (i.e. analysis of the patient-therapist relationship). TW is considered a core active ingredient in dynamic psychotherapy. Adequate process scales are needed to identify and analyze in-session effects of therapist techniques in psychodynamic psychotherapy and empirically establish their links to outcome. TWS was constructed to identify and categorize relational (transference) interventions, and explore the in-session impact of analysis of the patient-therapist relationship (transference work). TWS has sub scales that rate timing, content, and valence of the transference interventions, as well as response from the patient. Descriptions and elaborations of the items in TWS are provided. Clinical examples of transference work from the First Experimental Study of Transference Interpretations (FEST) are included and followed by examples of how to rate transcripts from therapy sessions with TWS. The present manual describes in detail the rating procedure when using Transference Work Scale. Ratings are illustrated with clinical examples from FEST. TWS might be a potentially useful tool to explore the interaction of timing, category, and valence of transference work in predicting in-session patient response as well as treatment outcome. TWS might prove especially suitable for intensive case studies combining quantitative and narrative data. First Experimental Study of Transference-interpretations (FEST307/95). ClinicalTrials.gov Identifier: NCT00423462. URL: http://clinicaltrials.gov/ct2/show/NCT00423462?term=FEST&rank=2.

Cryogenic mirror analysis

NASA Technical Reports Server (NTRS)

Nagy, S.

1988-01-01

Due to extraordinary distances scanned by modern telescopes, optical surfaces in such telescopes must be manufactured to unimaginable standards of perfection of a few thousandths of a centimeter. The detection of imperfections of less than 1/20 of a wavelength of light, for application in the building of the mirror for the Space Infrared Telescope Facility, was undertaken. Because the mirror must be kept very cold while in space, another factor comes into effect: cryogenics. The process to test a specific morror under cryogenic conditions is described; including the follow-up analysis accomplished through computer work. To better illustrate the process and analysis, a Pyrex Hex-Core mirror is followed through the process from the laser interferometry in the lab, to computer analysis via a computer program called FRINGE. This analysis via FRINGE is detailed.

Quantitative analysis of geomorphic processes using satellite image data at different scales

NASA Technical Reports Server (NTRS)

Williams, R. S., Jr.

1985-01-01

When aerial and satellite photographs and images are used in the quantitative analysis of geomorphic processes, either through direct observation of active processes or by analysis of landforms resulting from inferred active or dormant processes, a number of limitations in the use of such data must be considered. Active geomorphic processes work at different scales and rates. Therefore, the capability of imaging an active or dormant process depends primarily on the scale of the process and the spatial-resolution characteristic of the imaging system. Scale is an important factor in recording continuous and discontinuous active geomorphic processes, because what is not recorded will not be considered or even suspected in the analysis of orbital images. If the geomorphic process of landform change caused by the process is less than 200 m in x to y dimension, then it will not be recorded. Although the scale factor is critical, in the recording of discontinuous active geomorphic processes, the repeat interval of orbital-image acquisition of a planetary surface also is a consideration in order to capture a recurring short-lived geomorphic process or to record changes caused by either a continuous or a discontinuous geomorphic process.

Multidisciplinary team of intensive therapy: humanization and fragmentation of the work process.

PubMed

Evangelista, Viviane Canhizares; Domingos, Thiago da Silva; Siqueira, Fernanda Paula Cerântola; Braga, Eliana Mara

2016-01-01

to understand the meaning of humanized care in intensive care units considering the experience of the multidisciplinary team. descriptive and exploratory qualitative research. For this purpose, we conducted semi-structured interviews with 24 professionals of the heath-care team, and, after transcription, we organized the qualitative data according to content analysis. from two main categories, we were able to understand that humanized care is characterized in the actions of health-care: effective communication, team work, empathy, singularity, and integrality; and mischaracterized in the management processes, specifically in the fragmentation of the work process and health-care, in the precarious work conditions, and in differing conceptual aspects of the political proposal of humanization. care activities in intensive therapy are guided by the humanization of care and corroborate the hospital management as a challenge to be overcome to boost advances in the operationalization of this Brazilian policy.

Uncovering the requirements of cognitive work.

PubMed

Roth, Emilie M

2008-06-01

In this article, the author provides an overview of cognitive analysis methods and how they can be used to inform system analysis and design. Human factors has seen a shift toward modeling and support of cognitively intensive work (e.g., military command and control, medical planning and decision making, supervisory control of automated systems). Cognitive task analysis and cognitive work analysis methods extend traditional task analysis techniques to uncover the knowledge and thought processes that underlie performance in cognitively complex settings. The author reviews the multidisciplinary roots of cognitive analysis and the variety of cognitive task analysis and cognitive work analysis methods that have emerged. Cognitive analysis methods have been used successfully to guide system design, as well as development of function allocation, team structure, and training, so as to enhance performance and reduce the potential for error. A comprehensive characterization of cognitive work requires two mutually informing analyses: (a) examination of domain characteristics and constraints that define cognitive requirements and challenges and (b) examination of practitioner knowledge and strategies that underlie both expert and error-vulnerable performance. A variety of specific methods can be adapted to achieve these aims within the pragmatic constraints of particular projects. Cognitive analysis methods can be used effectively to anticipate cognitive performance problems and specify ways to improve individual and team cognitive performance (be it through new forms of training, user interfaces, or decision aids).

Structural investigation of a new composite process

NASA Astrophysics Data System (ADS)

Mayer, Philippe; Becker, Eric; Bigot, Régis; Kaïci, Bruno

2017-10-01

This work presents a study done on a new patented forming process, created to produce massive composite parts used for structural applications in automotive and aeronautics industries. The study presented in this paper deals with an experimental setup, used to characterize thick composite cylinders. The author presents the characterization of these cylinders and a new analysis method, in order to understand the consolidation steps of the composite in this forming process. The structural health of the part is illustrated by the analysis of the intra-bundle and inter-bundle porosities, by micrographs characterizations.

Modulation of memory fields by dopamine Dl receptors in prefrontal cortex

NASA Astrophysics Data System (ADS)

Williams, Graham V.; Goldman-Rakic, Patricia S.

1995-08-01

Dopamine has been implicated in the cognitive process of working memory but the cellular basis of its action has yet to be revealed. By combining iontophoretic analysis of dopamine receptors with single-cell recording during behaviour, we found that D1 antagonists can selectively potentiate the 'memory fields' of prefrontal neurons which subserve working memory. The precision shown for D1 receptor modulation of mnemonic processing indicates a direct gating of selective excitatory synaptic inputs to prefrontal neurons during cognition.

ADP Analysis project for the Human Resources Management Division

NASA Technical Reports Server (NTRS)

Tureman, Robert L., Jr.

1993-01-01

The ADP (Automated Data Processing) Analysis Project was conducted for the Human Resources Management Division (HRMD) of NASA's Langley Research Center. The three major areas of work in the project were computer support, automated inventory analysis, and an ADP study for the Division. The goal of the computer support work was to determine automation needs of Division personnel and help them solve computing problems. The goal of automated inventory analysis was to find a way to analyze installed software and usage on a Macintosh. Finally, the ADP functional systems study for the Division was designed to assess future HRMD needs concerning ADP organization and activities.

Analysis on ultrashort-pulse laser ablation for nanoscale film of ceramics

NASA Astrophysics Data System (ADS)

Ho, C. Y.; Tsai, Y. H.; Chiou, Y. J.

2017-06-01

This paper uses the dual-phase-lag model to study the ablation characteristics of femtosecond laser processing for nanometer-sized ceramic films. In ultrafast process and ultrasmall size where the two lags occur, a dual-phase-lag can be applied to analyse the ablation characteristics of femtosecond laser processing for materials. In this work, the ablation rates of nanometer-sized lead zirconate titanate (PZT) ceramics are investigated using a dual-phase-lag and the model is solved by Laplace transform method. The results obtained from this work are validated by the available experimental data. The effects of material thermal properties on the ablation characteristics of femtosecond laser processing for ceramics are also discussed.

On-line Monitoring for Cutting Tool Wear Condition Based on the Parameters

NASA Astrophysics Data System (ADS)

Han, Fenghua; Xie, Feng

2017-07-01

In the process of cutting tools, it is very important to monitor the working state of the tools. On the basis of acceleration signal acquisition under the constant speed, time domain and frequency domain analysis of relevant indicators monitor the online of tool wear condition. The analysis results show that the method can effectively judge the tool wear condition in the process of machining. It has certain application value.

Age-Related Differences in Working Memory Performance in A 2-Back Task

PubMed Central

Wild-Wall, Nele; Falkenstein, Michael; Gajewski, Patrick D.

2011-01-01

The present study aimed to elucidate the neuro-cognitive processes underlying age-related differences in working memory. Young and middle-aged participants performed a two-choice task with low and a 2-back task with high working memory load. The P300, an event-related potential reflecting controlled stimulus–response processing in working memory, and the underlying neuronal sources of expected age-related differences were analyzed using sLORETA. Response speed was generally slower for the middle-aged than the young group. Under low working memory load the middle-aged participants traded speed for accuracy. The middle-aged were less efficient in the 2-back task as they responded slower while the error rates did not differ for groups. An age-related decline of the P300 amplitude and characteristic topographical differences were especially evident in the 2-back task. A more detailed analysis of the P300 in non-target trials revealed that amplitudes in the young but not middle-aged group differentiate between correctly detected vs. missed targets in the following trial. For these trials, source analysis revealed higher activation for the young vs. middle-aged group in brain areas which support working memory processes. The relationship between P300 and overt performance was validated by significant correlations. To sum up, under high working memory load the young group showed an increased neuronal activity before a successful detected target, while the middle-aged group showed the same neuronal pattern regardless of whether a subsequent target will be detected or missed. This stable memory trace before detected targets was reflected by a specific activation enhancement in brain areas which orchestrate maintenance, update, storage, and retrieval of information in working memory. PMID:21909328

Development of NASA's Accident Precursor Analysis Process Through Application on the Space Shuttle Orbiter

NASA Technical Reports Server (NTRS)

Maggio, Gaspare; Groen, Frank; Hamlin, Teri; Youngblood, Robert

2010-01-01

Accident Precursor Analysis (APA) serves as the bridge between existing risk modeling activities, which are often based on historical or generic failure statistics, and system anomalies, which provide crucial information about the failure mechanisms that are actually operative in the system. APA docs more than simply track experience: it systematically evaluates experience, looking for under-appreciated risks that may warrant changes to design or operational practice. This paper presents the pilot application of the NASA APA process to Space Shuttle Orbiter systems. In this effort, the working sessions conducted at Johnson Space Center (JSC) piloted the APA process developed by Information Systems Laboratories (ISL) over the last two years under the auspices of NASA's Office of Safety & Mission Assurance, with the assistance of the Safety & Mission Assurance (S&MA) Shuttle & Exploration Analysis Branch. This process is built around facilitated working sessions involving diverse system experts. One important aspect of this particular APA process is its focus on understanding the physical mechanism responsible for an operational anomaly, followed by evaluation of the risk significance of the observed anomaly as well as consideration of generalizations of the underlying mechanism to other contexts. Model completeness will probably always be an issue, but this process tries to leverage operating experience to the extent possible in order to address completeness issues before a catastrophe occurs.

Hardening Effect Analysis by Modular Upper Bound and Finite Element Methods in Indentation of Aluminum, Steel, Titanium and Superalloys

PubMed Central

Bermudo, Carolina; Sevilla, Lorenzo; Martín, Francisco; Trujillo, Francisco Javier

2017-01-01

The application of incremental processes in the manufacturing industry is having a great development in recent years. The first stage of an Incremental Forming Process can be defined as an indentation. Because of this, the indentation process is starting to be widely studied, not only as a hardening test but also as a forming process. Thus, in this work, an analysis of the indentation process under the new Modular Upper Bound perspective has been performed. The modular implementation has several advantages, including the possibility of the introduction of different parameters to extend the study, such as the friction effect, the temperature or the hardening effect studied in this paper. The main objective of the present work is to analyze the three hardening models developed depending on the material characteristics. In order to support the validation of the hardening models, finite element analyses of diverse materials under an indentation are carried out. Results obtained from the Modular Upper Bound are in concordance with the results obtained from the numerical analyses. In addition, the numerical and analytical methods are in concordance with the results previously obtained in the experimental indentation of annealed aluminum A92030. Due to the introduction of the hardening factor, the new modular distribution is a suitable option for the analysis of indentation process. PMID:28772914

Standardization of pitch-range settings in voice acoustic analysis.

PubMed

Vogel, Adam P; Maruff, Paul; Snyder, Peter J; Mundt, James C

2009-05-01

Voice acoustic analysis is typically a labor-intensive, time-consuming process that requires the application of idiosyncratic parameters tailored to individual aspects of the speech signal. Such processes limit the efficiency and utility of voice analysis in clinical practice as well as in applied research and development. In the present study, we analyzed 1,120 voice files, using standard techniques (case-by-case hand analysis), taking roughly 10 work weeks of personnel time to complete. The results were compared with the analytic output of several automated analysis scripts that made use of preset pitch-range parameters. After pitch windows were selected to appropriately account for sex differences, the automated analysis scripts reduced processing time of the 1,120 speech samples to less than 2.5 h and produced results comparable to those obtained with hand analysis. However, caution should be exercised when applying the suggested preset values to pathological voice populations.

Mess management in microbial ecology: Rhetorical processes of disciplinary integration

NASA Astrophysics Data System (ADS)

McCracken, Christopher W.

As interdisciplinary work becomes more common in the sciences, research into the rhetorical processes mediating disciplinary integration becomes more vital. This dissertation, which takes as its subject the integration of microbiology and ecology, combines a postplural approach to rhetoric of science research with Victor Turner's "social drama" analysis and a third-generation activity theory methodological framework to identify conceptual and practical conflicts in interdisciplinary work and describe how, through visual and verbal communication, scientists negotiate these conflicts. First, to understand the conflicting disciplinary principles that might impede integration, the author conducts a Turnerian analysis of a disciplinary conflict that took place in the 1960s and 70s, during which American ecologists and biologists debated whether they should participate in the International Biological Program (IBP). Participation in the IBP ultimately contributed to the emergence of ecology as a discipline distinct from biology, and Turnerian social drama analysis of the debate surrounding participation lays bare the conflicting principles separating biology and ecology. Second, to answer the question of how these conflicting principles are negotiated in practice, the author reports on a yearlong qualitative study of scientists working in a microbial ecology laboratory. Focusing specifically on two case studies from this fieldwork that illustrate the key concept of textually mediated disciplinary integration, the author's analysis demonstrates how scientific objects emerge in differently situated practices, and how these objects manage to cohere despite their multiplicity through textually mediated rhetorical processes of calibration and alignment.

Integrating Data From the UK National Reporting and Learning System With Work Domain Analysis to Understand Patient Safety Incidents in Community Pharmacy.

PubMed

Phipps, Denham L; Tam, W Vanessa; Ashcroft, Darren M

2017-03-01

To explore the combined use of a critical incident database and work domain analysis to understand patient safety issues in a health-care setting. A retrospective review was conducted of incidents reported to the UK National Reporting and Learning System (NRLS) that involved community pharmacy between April 2005 and August 2010. A work domain analysis of community pharmacy was constructed using observational data from 5 community pharmacies, technical documentation, and a focus group with 6 pharmacists. Reports from the NRLS were mapped onto the model generated by the work domain analysis. Approximately 14,709 incident reports meeting the selection criteria were retrieved from the NRLS. Descriptive statistical analysis of these reports found that almost all of the incidents involved medication and that the most frequently occurring error types were dose/strength errors, incorrect medication, and incorrect formulation. The work domain analysis identified 4 overall purposes for community pharmacy: business viability, health promotion and clinical services, provision of medication, and use of medication. These purposes were served by lower-order characteristics of the work system (such as the functions, processes and objects). The tasks most frequently implicated in the incident reports were those involving medication storage, assembly, or patient medication records. Combining the insights from different analytical methods improves understanding of patient safety problems. Incident reporting data can be used to identify general patterns, whereas the work domain analysis can generate information about the contextual factors that surround a critical task.

HEP Software Foundation Community White Paper Working Group - Data Analysis and Interpretation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bauerdick, Lothar

At the heart of experimental high energy physics (HEP) is the development of facilities and instrumentation that provide sensitivity to new phenomena. Our understanding of nature at its most fundamental level is advanced through the analysis and interpretation of data from sophisticated detectors in HEP experiments. The goal of data analysis systems is to realize the maximum possible scientific potential of the data within the constraints of computing and human resources in the least time. To achieve this goal, future analysis systems should empower physicists to access the data with a high level of interactivity, reproducibility and throughput capability. Asmore » part of the HEP Software Foundation Community White Paper process, a working group on Data Analysis and Interpretation was formed to assess the challenges and opportunities in HEP data analysis and develop a roadmap for activities in this area over the next decade. In this report, the key findings and recommendations of the Data Analysis and Interpretation Working Group are presented.« less

The Pioneering Work of Enrico Morselli (1852-1929) in Light of Modern Scientific Research on Hypnosis and Suggestion.

PubMed

Bartolucci, Chiara; Lombardo, Giovanni Pietro

2017-01-01

This article examines research on hypnosis and suggestion, starting with the nineteenth-century model proposed by Enrico Morselli (1852-1929), an illustrious Italian psychiatrist and psychologist. The authors conducted an original psychophysiological analysis of hypnosis, distancing the work from the neuropathological concept of the time and proposing a model based on a naturalistic approach to investigating mental processes. The issues investigated by Morselli, including the definition of hypnosis and analysis of specific mental processes such as attention and memory, are reviewed in light of modern research. From the view of modern neuroscientific concepts, some problems that originated in the nineteenth century still appear to be present and pose still-open questions.

Iterative categorization (IC): a systematic technique for analysing qualitative data

PubMed Central

2016-01-01

Abstract The processes of analysing qualitative data, particularly the stage between coding and publication, are often vague and/or poorly explained within addiction science and research more broadly. A simple but rigorous and transparent technique for analysing qualitative textual data, developed within the field of addiction, is described. The technique, iterative categorization (IC), is suitable for use with inductive and deductive codes and can support a range of common analytical approaches, e.g. thematic analysis, Framework, constant comparison, analytical induction, content analysis, conversational analysis, discourse analysis, interpretative phenomenological analysis and narrative analysis. Once the data have been coded, the only software required is a standard word processing package. Worked examples are provided. PMID:26806155

Process-based Cost Estimation for Ramjet/Scramjet Engines

NASA Technical Reports Server (NTRS)

Singh, Brijendra; Torres, Felix; Nesman, Miles; Reynolds, John

2003-01-01

Process-based cost estimation plays a key role in effecting cultural change that integrates distributed science, technology and engineering teams to rapidly create innovative and affordable products. Working together, NASA Glenn Research Center and Boeing Canoga Park have developed a methodology of process-based cost estimation bridging the methodologies of high-level parametric models and detailed bottoms-up estimation. The NASA GRC/Boeing CP process-based cost model provides a probabilistic structure of layered cost drivers. High-level inputs characterize mission requirements, system performance, and relevant economic factors. Design alternatives are extracted from a standard, product-specific work breakdown structure to pre-load lower-level cost driver inputs and generate the cost-risk analysis. As product design progresses and matures the lower level more detailed cost drivers can be re-accessed and the projected variation of input values narrowed, thereby generating a progressively more accurate estimate of cost-risk. Incorporated into the process-based cost model are techniques for decision analysis, specifically, the analytic hierarchy process (AHP) and functional utility analysis. Design alternatives may then be evaluated not just on cost-risk, but also user defined performance and schedule criteria. This implementation of full-trade study support contributes significantly to the realization of the integrated development environment. The process-based cost estimation model generates development and manufacturing cost estimates. The development team plans to expand the manufacturing process base from approximately 80 manufacturing processes to over 250 processes. Operation and support cost modeling is also envisioned. Process-based estimation considers the materials, resources, and processes in establishing cost-risk and rather depending on weight as an input, actually estimates weight along with cost and schedule.

Working in dissonance: experiences of work instability in workers with common mental disorders.

PubMed

Danielsson, Louise; Bertilsson, Monica; Holmgren, Kristina; Hensing, Gunnel

2017-05-18

Common mental disorders have a negative impact on work functioning, but less is known about the process when the functioning starts to destabilize. This study explores experiences of work instability in workers with common mental disorders. A grounded theory study using a theoretical sampling frame, individual in-depth interviews and a constant comparative analysis conducted by a multidisciplinary research team. The sample involved 27 workers with common mental disorders, currently working full or part time, or being on sick leave not more than 6 months. They were women and men of different ages, representing different occupations and illness severity. A general process of work instability was conceptualized by the core category Working in dissonance: captured in a bubble inside the work stream. The workers described that their ordinary fluency at work was disturbed. They distanced themselves from other people at and outside work, which helped them to regain their flow but simultaneously made them feel isolated. Four categories described sub-processes of the dissonance: Working out of rhythm, Working in discomfort, Working disconnected and Working in a no man's land. The experience of work instability in CMDs was conceptualized as "working in dissonance", suggesting a multifaceted dissonance at work, characterized by a sense of being caught up, as if in a bubble. Focusing on how the worker can re-enter their flow at work when experiencing dissonance is a new approach to explore in occupational and clinical settings.

Structuring Effective Student Teams.

ERIC Educational Resources Information Center

Dickson, Ellen L.

1997-01-01

Experience with student teams working on policy analysis projects indicates the need for faculty supervision of teams in the process of addressing complex issues. The problem-solving approach adopted in one policy analysis course is described, including assignments and tasks, issues and sponsors, team dynamics, conflict management, and the…

Cyber-physical system for a water reclamation plant: Balancing aeration, energy, and water quality to maintain process resilience

NASA Astrophysics Data System (ADS)

Zhu, Junjie

Aeration accounts for a large fraction of energy consumption in conventional water reclamation plants (WRPs). Although process operations at older WRPs can satisfy effluent permit requirements, they typically operate with excess aeration. More effective process controls at older WRPs can be challenging as operators work to balance higher energy costs and more stringent effluent limitations while managing fluctuating loads. Therefore, understandings of process resilience or ability to quickly return to original operation conditions at a WRP are important. A state-of-art WRP should maintain process resilience to deal with different kinds of perturbations even after optimization of energy demands. This work was to evaluate the applicability and feasibility of cyber-physical system (CPS) for improving operation at Metropolitan Water Reclamation District of Greater Chicago (MWRDGC) Calumet WRP. In this work, a process model was developed and used to better understand the conditions of current Calumet WRP, with additional valuable information from two dissolved oxygen field measurements. Meanwhile, a classification system was developed to reveal the pattern of historical influent scenario based on cluster analysis and cross-tabulation analysis. Based on the results from the classification, typical process control options were investigated. To ensure the feasibility of information acquisition, the reliability and flexibility of soft sensors were assessed to typical influent conditions. Finally, the process resilience was investigated to better balance influent perturbations, energy demands, and effluent quality for long-term operations. These investigations and evaluations show that although the energy demands change as the influent conditions and process controls. In general, aeration savings could be up to 50% from the level of current consumption; with a more complex process controls, the saving could be up to 70% in relatively steady-state conditions and at least 40% in relatively challenging transient conditions. The soft sensors can provide reliable and flexible performance on target predictions. The plant can still maintain at a similar level of process resilience after 50% aeration saving, even during long-term perturbations. Overall, this work shows that it is well feasible to provide more cost-effective operations at the Calumet WRP, and meanwhile influent perturbations, effluent quality, and process resilience are well in balance.

Innovative Method of Analysis of Actual Cost of Work in Progress

NASA Astrophysics Data System (ADS)

Fil, O.; Terentev, V.

2017-11-01

The article focuses on the basic theory and practical aspects of improving the strategic management in terms of enhancing the quality of a technological process: these aspects have been proven experimentally by their introduction in company operations. The authors have worked out some proposals aimed at selecting an optimal supplier for building companies as well as the algorithm for the analysis and optimization of a construction company basing on scientific and practical research and the experimental data obtained in the experiment

Timing of Formal Phase Safety Reviews for Large-Scale Integrated Hazard Analysis

NASA Technical Reports Server (NTRS)

Massie, Michael J.; Morris, A. Terry

2010-01-01

Integrated hazard analysis (IHA) is a process used to identify and control unacceptable risk. As such, it does not occur in a vacuum. IHA approaches must be tailored to fit the system being analyzed. Physical, resource, organizational and temporal constraints on large-scale integrated systems impose additional direct or derived requirements on the IHA. The timing and interaction between engineering and safety organizations can provide either benefits or hindrances to the overall end product. The traditional approach for formal phase safety review timing and content, which generally works well for small- to moderate-scale systems, does not work well for very large-scale integrated systems. This paper proposes a modified approach to timing and content of formal phase safety reviews for IHA. Details of the tailoring process for IHA will describe how to avoid temporary disconnects in major milestone reviews and how to maintain a cohesive end-to-end integration story particularly for systems where the integrator inherently has little to no insight into lower level systems. The proposal has the advantage of allowing the hazard analysis development process to occur as technical data normally matures.

Delving into the 'emotional storms': A thematic analysis of psychoanalysts' initial consultation reports.

PubMed

Pérez, Alejandra; Crick, Penelope; Lawrence, Susan

2015-06-01

Psychoanalysts' written reports on initial consultations are a window into the complexities of a crucial aspect of psychoanalytic work. However, systematic research in this area has largely focused on patients' demographic factors or standardized measures. The present study looked at reports of all the consultations taking place at the London Clinic of Psychoanalysis over one calendar year (N = 100). The aim was to explore psychoanalysts' different explicit styles of working and reporting as well as further understanding implicit processes used in thinking and writing about each particular consultation experience. A thematic analysis revealed a set of themes that related to a style of working and thinking about the consultation process as a dyadic experience, where the interaction, affective reactions and contact made between the two are the focus when thinking of making a recommendation for psychoanalysis. The majority of the reports had an open, exploratory quality. The writing of reports appears to give the analyst an opportunity to process the consultation experience and arrive at a more triangular position. Writing reports is a more valuable part of the consultation process than has formally been recognized and acknowledged. The limitations of this study as well as the relevance of these findings for future research are discussed. Copyright © 2015 Institute of Psychoanalysis.

Theoretical test of Jarzynski's equality for reversible volume-switching processes of an ideal gas system.

PubMed

Sung, Jaeyoung

2007-07-01

We present an exact theoretical test of Jarzynski's equality (JE) for reversible volume-switching processes of an ideal gas system. The exact analysis shows that the prediction of JE for the free energy difference is the same as the work done on the gas system during the reversible process that is dependent on the shape of path of the reversible volume-switching process.

Risk Assessment for Stonecutting Enterprises

NASA Astrophysics Data System (ADS)

Aleksandrova, A. J.; Timofeeva, S. S.

2017-04-01

Working conditions at enterprises and artisanal workshops for the processing of jewelry and ornamental stones were considered. The main stages of the technological process for processing of stone raw materials were shown; dangerous processes in the extraction of stone and its processing were identified. The characteristic of harmful and dangerous production factors affecting stonecutters is given. It was revealed that the most dangerous are the increased level of noise and vibration, as well as chemical reagents. The results of a special assessment of the working conditions of stone-cutting plant workers are studied. Professions with high professional risk were identified; an analysis of occupational risks and occupational injuries was carried out. Risk assessment was produced by several methods; professions with high and medium risk indicators were identified by results of the evaluation. The application of risk assessment methods was given the possibility to justify rational measures reducing risks to the lowest possible level. The received quantitative indicators of risk of workers of the stone-cutting enterprises are the result of this work.

"What Do They Want Me To Say?" The hidden curriculum at work in the medical school selection process: a qualitative study

PubMed Central

2012-01-01

Background There has been little study of the role of the essay question in selection for medical school. The purpose of this study was to obtain a better understanding of how applicants approached the essay questions used in selection at our medical school in 2007. Methods The authors conducted a qualitative analysis of 210 essays written as part of the medical school admissions process, and developed a conceptual framework to describe the relationships, ideas and concepts observed in the data. Results Findings of this analysis were confirmed in interviews with applicants and assessors. Analysis revealed a tension between "genuine" and "expected" responses that we believe applicants experience when choosing how to answer questions in the admissions process. A theory named "What do they want me to say?" was developed to describe the ways in which applicants modulate their responses to conform to their expectations of the selection process; the elements of this theory were confirmed in interviews with applicants and assessors. Conclusions This work suggests the existence of a "hidden curriculum of admissions" and demonstrates that the process of selection has a strong influence on applicant response. This paper suggests ways that selection might be modified to address this effect. Studies such as this can help us to appreciate the unintended consequences of admissions processes and can identify ways to make the selection process more consistent, transparent and fair. PMID:22448658

Specifications of a Simulation Model for a Local Area Network Design in Support of a Stock Point Logistics Integrated Communication Environment (SPLICE).

DTIC Science & Technology

1983-06-01

constrained at each step. Use of dis- crete simulation can be a powerful tool in this process if its role is carefully planned. The gross behavior of the...by projecting: - the arrival of units of work at SPLICE processing facilities (workload analysis) . - the amount of processing resources comsumed in

Studying Relational Spaces in Secondary School: Applying a Spatial Framework for the Study of Borderlands and Relational Work in School Improvement Processes

ERIC Educational Resources Information Center

Frelin, Anneli; Grannäs, Jan

2014-01-01

This article introduces a theoretical framework for studying school improvement processes such as making school environments safer. Using concepts from spatial theory, in which distinctions between mental, social and physical space are applied makes for a multidimensional analysis of processes of change. In a multilevel case study, these were…

Probabilistic Design and Analysis Framework

NASA Technical Reports Server (NTRS)

Strack, William C.; Nagpal, Vinod K.

2010-01-01

PRODAF is a software package designed to aid analysts and designers in conducting probabilistic analysis of components and systems. PRODAF can integrate multiple analysis programs to ease the tedious process of conducting a complex analysis process that requires the use of multiple software packages. The work uses a commercial finite element analysis (FEA) program with modules from NESSUS to conduct a probabilistic analysis of a hypothetical turbine blade, disk, and shaft model. PRODAF applies the response surface method, at the component level, and extrapolates the component-level responses to the system level. Hypothetical components of a gas turbine engine are first deterministically modeled using FEA. Variations in selected geometrical dimensions and loading conditions are analyzed to determine the effects of the stress state within each component. Geometric variations include the cord length and height for the blade, inner radius, outer radius, and thickness, which are varied for the disk. Probabilistic analysis is carried out using developing software packages like System Uncertainty Analysis (SUA) and PRODAF. PRODAF was used with a commercial deterministic FEA program in conjunction with modules from the probabilistic analysis program, NESTEM, to perturb loads and geometries to provide a reliability and sensitivity analysis. PRODAF simplified the handling of data among the various programs involved, and will work with many commercial and opensource deterministic programs, probabilistic programs, or modules.

A macro-ergonomic work system analysis of the diagnostic testing process in an outpatient health care facility for process improvement and patient safety.

PubMed

Hallock, M L; Alper, S J; Karsh, B

The diagnosis of illness is important for quality patient care and patient safety and is greatly aided by diagnostic testing. For diagnostic tests, such as pathology and radiology, to positively impact patient care, the tests must be processed and the physician and patient must be notified of the results in a timely fashion. There are many steps in the diagnostic testing process, from ordering to result dissemination, where the process can break down and therefore delay patient care and reduce patient safety. This study was carried out to examine the diagnostic testing process (i.e. from ordering to result notification) and used a macro-ergonomic work system analysis to uncover system design flaws that contributed to delayed physician and patient notification of results. The study was carried out in a large urban outpatient health-care facility made up of 30 outpatient clinics. Results indicated a number of variances that contributed to delays, the majority of which occurred across the boundaries of different systems and were related to poor or absent feedback structures. Recommendations for improvements are discussed.

Defining behavior-environment interactions: translating and developing an experimental and applied behavior-analytic vocabulary in and to the national language.

PubMed

Tuomisto, Martti T; Parkkinen, Lauri

2012-05-01

Verbal behavior, as in the use of terms, is an important part of scientific activity in general and behavior analysis in particular. Many glossaries and dictionaries of behavior analysis have been published in English, but few in any other language. Here we review the area of behavior analytic terminology, its translations, and development in languages other than English. As an example, we use our own mother tongue, Finnish, which provides a suitable example of the process of translation and development of behavior analytic terminology, because it differs from Indo-European languages and entails specific advantages and challenges in the translation process. We have published three editions of a general dictionary of behavior analysis including 801 terms relevant to the experimental analysis of behavior and applied behavior analysis and one edition of a dictionary of applied and clinical behavior analysis containing 280 terms. Because this work has been important to us, we hope this review will encourage similar work by behavior analysts in other countries whose native language is not English. Behavior analysis as an advanced science deserves widespread international dissemination and proper translations are essential to that goal.

Defining Behavior–Environment Interactions: Translating and Developing an Experimental and Applied Behavior-Analytic Vocabulary in and to the National Language

PubMed Central

Tuomisto, Martti T; Parkkinen, Lauri

2012-01-01

Verbal behavior, as in the use of terms, is an important part of scientific activity in general and behavior analysis in particular. Many glossaries and dictionaries of behavior analysis have been published in English, but few in any other language. Here we review the area of behavior analytic terminology, its translations, and development in languages other than English. As an example, we use our own mother tongue, Finnish, which provides a suitable example of the process of translation and development of behavior analytic terminology, because it differs from Indo-European languages and entails specific advantages and challenges in the translation process. We have published three editions of a general dictionary of behavior analysis including 801 terms relevant to the experimental analysis of behavior and applied behavior analysis and one edition of a dictionary of applied and clinical behavior analysis containing 280 terms. Because this work has been important to us, we hope this review will encourage similar work by behavior analysts in other countries whose native language is not English. Behavior analysis as an advanced science deserves widespread international dissemination and proper translations are essential to that goal. PMID:22693363

A Meta-Analysis of Working Memory Impairments in Children with Attention-Deficit/hyperactivity Disorder.

ERIC Educational Resources Information Center

Martinussen, Rhonda; Hayden, Jill; Hogg-Johnson, Sheilah; Tannock, Rosemary

2005-01-01

Objective: To determine the empirical evidence for deficits in working memory (WM) processes in children and adolescents with attention-deficit/hyperactivity disorder (ADHD). Method: Exploratory meta-analytic procedures were used to investigate whether children with ADHD exhibit WM impairments. Twenty-six empirical research studies published from…

Work-Integrated Learning Process in Tourism Training Programs in Vietnam: Voices of Education and Industry

ERIC Educational Resources Information Center

Khuong, Cam Thi Hong

2016-01-01

This paper addresses the work-integrated learning (WIL) initiative embedded in selected tourism training programs in Vietnam. The research was grounded on the framework of stakeholder ethos. Drawing on tourism training curriculum analysis and interviews with lecturers, institutional leaders, industry managers and internship supervisors, this study…

Opening the Box: Information Technology, Work Practices, and Wages.

ERIC Educational Resources Information Center

Hunter, Larry W.; Lakfas, John J.

2003-01-01

Analysis of 1994-95 data on customer service representatives in 303 banks revealed a positive relationship between high-involvement work practices (quality circles) and extensive use of information technology (IT) to support sales. Use of IT to automate routine processes and no quality circles were associated with lower wages. (Contains 55…

An overview of data acquisition, signal coding and data analysis techniques for MST radars

NASA Technical Reports Server (NTRS)

Rastogi, P. K.

1986-01-01

An overview is given of the data acquisition, signal processing, and data analysis techniques that are currently in use with high power MST/ST (mesosphere stratosphere troposphere/stratosphere troposphere) radars. This review supplements the works of Rastogi (1983) and Farley (1984) presented at previous MAP workshops. A general description is given of data acquisition and signal processing operations and they are characterized on the basis of their disparate time scales. Then signal coding, a brief description of frequently used codes, and their limitations are discussed, and finally, several aspects of statistical data processing such as signal statistics, power spectrum and autocovariance analysis, outlier removal techniques are discussed.

Experiences of Iranian Nurses that Intent to Leave the Clinical Nursing: a Content Analysis

PubMed Central

Valizadeh, Leila; Zamanzadeh, Vahid; Habibzadeh, Hosein; Alilu, Leyla; Gillespie, Mark; Shakibi, Ali

2016-01-01

Introduction: Despite the current shortage of nurses, it is important to know the reasons nurses want to leave the clinical setting. The purpose of this study was to explore the experiences of nurses who intend to leave clinical nursing. Methods: In a qualitative content analysis study, data obtained from 13 in-depth face-to-face semi-structured interviews with nurses working in hospitals affiliated to the Tabriz and Urmia University of Medical Sciences in Iran, selected through purposive sampling. A conventional content analysis was used for data analysis. Results: Four categories and eleven subcategories emerged during data analysis. The extracted categories and sub categories consisted of (I) Entry routes into nursing (implicitly entry, targeted entry), (II) Defects in dignity (lack of professional vision toward the nurses, social status of nurses), (III) Work in non-ideal working environment (lack of support, discrimination, conflict, lack of opportunities for advancement), and (IV) Dissatisfaction with working conditions (heavy workload, lack of power, unusual working hours). Conclusion: The findings of this qualitative study reflect professional turnover as a complex, ongoing, multidimensional process. By identifying the factors responsible, it could be possible to retain nurses in the field. PMID:27354981

Technique development for conducting mechanical tests to study the pore formation process in case of material fracture

NASA Astrophysics Data System (ADS)

Magomedova, D. K.; Efimov, M. A.; Murashkin, M. Yu.

2018-05-01

The main purpose of this work was the development of an experimental technique for search and analysis of pore formation in the presented material. Geometry of the samples, the procedure of experiment and processing the samples for investigation were developed.

The Analysis of Spontaneous Processes Using Equilibrium Thermodynamics

ERIC Educational Resources Information Center

Honig, J. M.; Ben-Amotz, Dor

2006-01-01

The derivations based on the use of deficit functions provide a simple means of demonstrating the extremism conditions that are applicable to various thermodynamics function. The method shows that the maximum quantity of work is available from a system only when the processes are carried out reversibly since irreversible (spontaneous)…

Simon Plays Simon Says: The Timing of Turn-Taking in an imitation Game

DTIC Science & Technology

2012-01-01

found in the linguistics literature as well. Some work focuses on the structure of syntax and semantics in language usage [3], and other work...components come from many different approaches. Turn- taking is a highly multimodal process, and prior work gives much in-depth analysis of specific...attractive as an initial domain of investigation for its multimodality , interactive symmetry, and relative simplicity, being isolated from such

Choosing Mars-Time: Analysis of the Mars Exploration Rover Experience

NASA Technical Reports Server (NTRS)

Bass, Deborah S.; Wales,Roxana C.; Shalin, Valerie L.

2004-01-01

This paper focuses on the Mars Exploration Rover (MER) mission decision to work on Mars Time and the implications of that decision on the tactical surface operations process as personnel planned activities and created a new command load for work on each Martian sol. The paper also looks at tools that supported the complexities of Mars Time work, and makes some comparisons between Earth and Mars time scheduling.

Assessment of soil health and fertility indicators with mobile phone imagery

NASA Astrophysics Data System (ADS)

Aitkenhead, Matt; Gwatkin, Richard; Coull, Malcolm; Donnelly, David

2015-04-01

Work on rapid soil assessment in the field has led to many hand-held sensors for soil monitoring (e.g. NIR, FTIR, XRF). Recent work by a research team at the James Hutton Institute has led to an integrated framework of mobile phones, apps and server-side processing. One example of this is the SOCIT app for estimating soil organic matter and carbon using geolocated mobile phone camera imagery. The SOCIT app is only applicable for agricultural soils in Scotland, and our intention is to expand this work both geographically and in functional ability. Ongoing work for the development of a prototype app for estimating soil characteristics across Europe using mobile phone imagery and the JRC LUCAS dataset will be described. Additionally, we will demonstrate recent work in estimating a number of soil health indicators from more detailed analysis of soil photographs. Accuracy levels achieved for estimating soil organic matter and organic carbon content, pH, structure, cation exchange capacity and texture vary and are not as good as those achieved with laboratory analysis, but are suitable for rapid field-based assessment. Issues relating to this work include colour stabilisation and calibration, integration with data on site characteristics, data processing, model development and the ethical use of data captured by others, and each of these topics will also be discussed.

Working in the Field of Complex Psychological Trauma: A Framework for Personal and Professional Growth, Training, and Supervision.

PubMed

Coleman, Anne Marie; Chouliara, Zoë; Currie, Kay

2018-03-01

The aim of this article is to explore the positive and negative impacts of working therapeutically in complex psychological trauma (CPT), particularly the field of gender-based violence (GBV) and childhood sexual abuse (CSA), from the clinicians' perspective. The focus was on the prospect of positive gains and growth for therapists. Twenty-one clinicians ( n = 21; counselors/psychotherapists and psychologists) from National Health Service (NHS) specialist trauma services, a community mental health team, and specialist sexual assault counseling organization participated. Interpretative phenomenological analysis (IPA) was utilized to conduct single one-off interviews and analysis. Six themes were identified: Called to the work; Connection, Separation, and Oneness; Into and out of the darkness; Chaos into meaning; Reparation not repetition; and Expansion and growth. The first "Therapist Led Framework of Growth in Trauma Work" is presented. Vicarious posttraumatic growth (VPTG) was a key finding, with CPT therapists experiencing a "challenge/benefit/change" growth process. Adoption of actively relational strategies to enhance clinicians' growth process through trauma work is being proposed. The benefits of conceptualizing both the positive and negative impacts of such work for supervision, training, shaping the formal curricula, service management, and continuing professional development (CPD) are being discussed. The need for good practice guidelines on self-care internationally is highlighted.

Decision Making Processes and Outcomes

PubMed Central

Hicks Patrick, Julie; Steele, Jenessa C.; Spencer, S. Melinda

2013-01-01

The primary aim of this study was to examine the contributions of individual characteristics and strategic processing to the prediction of decision quality. Data were provided by 176 adults, ages 18 to 93 years, who completed computerized decision-making vignettes and a battery of demographic and cognitive measures. We examined the relations among age, domain-specific experience, working memory, and three measures of strategic information search to the prediction of solution quality using a 4-step hierarchical linear regression analysis. Working memory and two measures of strategic processing uniquely contributed to the variance explained. Results are discussed in terms of potential advances to both theory and intervention efforts. PMID:24282638

Modeling and Simulation for Mission Operations Work System Design

NASA Technical Reports Server (NTRS)

Sierhuis, Maarten; Clancey, William J.; Seah, Chin; Trimble, Jay P.; Sims, Michael H.

2003-01-01

Work System analysis and design is complex and non-deterministic. In this paper we describe Brahms, a multiagent modeling and simulation environment for designing complex interactions in human-machine systems. Brahms was originally conceived as a business process design tool that simulates work practices, including social systems of work. We describe our modeling and simulation method for mission operations work systems design, based on a research case study in which we used Brahms to design mission operations for a proposed discovery mission to the Moon. We then describe the results of an actual method application project-the Brahms Mars Exploration Rover. Space mission operations are similar to operations of traditional organizations; we show that the application of Brahms for space mission operations design is relevant and transferable to other types of business processes in organizations.

A novel approach to the dynamical complexity of the Earth's magnetosphere at geomagnetic storm time-scales based on recurrences

NASA Astrophysics Data System (ADS)

Donner, Reik; Balasis, Georgios; Stolbova, Veronika; Wiedermann, Marc; Georgiou, Marina; Kurths, Jürgen

2016-04-01

Magnetic storms are the most prominent global manifestations of out-of-equilibrium magnetospheric dynamics. Investigating the dynamical complexity exhibited by geomagnetic observables can provide valuable insights into relevant physical processes as well as temporal scales associated with this phenomenon. In this work, we introduce several innovative data analysis techniques enabling a quantitative analysis of the Dst index non-stationary behavior. Using recurrence quantification analysis (RQA) and recurrence network analysis (RNA), we obtain a variety of complexity measures serving as markers of quiet- and storm-time magnetospheric dynamics. We additionally apply these techniques to the main driver of Dst index variations, the V BSouth coupling function and interplanetary medium parameters Bz and Pdyn in order to discriminate internal processes from the magnetosphere's response directly induced by the external forcing by the solar wind. The derived recurrence-based measures allow us to improve the accuracy with which magnetospheric storms can be classified based on ground-based observations. The new methodology presented here could be of significant interest for the space weather research community working on time series analysis for magnetic storm forecasts.

Assessment of working conditions in a modern Russian milk processing plant from the aspect of occupational medicine.

PubMed

Belova, L V; Mishkich, I A; Kresova, G A; Liubomudrova, T A

1999-03-01

Assessment of harmful industrial factors caused by work conditions in a modern milk processing plant. Work conditions, rest, nutrition, medical service, and subjective health indices among the employees in a new milk processing plant were studied. We used a specially formed questionnaire; instrumental measurements of microclimate parameters, noise, and illumination at workplace; laboratory physical and chemical evaluation of air pollution with aerosols and gases in the plant premises; chronometric studies determining the workers' activity during the working day location, and physical and psychological body exertion at the time of industrial activities; and assessment of design and operating documents of the plant. Laboratory studies included 157 workers, 1,724 tests, 26 chronometric studies, and analysis of 11 plant's documents. Unfavorable microclimatic conditions, noise, inadequate illumination, air pollution with dust and toxic substances, physical workload, increased demand for concentration, and monotony of labor in mass production professions were found. A great proportion of workers was dissatisfied with their working conditions and many suffered from occupational diseases and work-related diseases. The conditions of work in the studied milk processing plant may be classified as harmful and dangerous. The flaws in technological process, omissions in design and construction of the plant, as well as its improper exploitation aggravated industrial harmful factors. In combination with unsatisfactory organization of rest, nutrition, and medical services in the plant these factors may affect the workers' health and cause general and occupational diseases.

Bearing the brunt: co-workers' experiences of work reintegration processes.

PubMed

Dunstan, Debra A; MacEachen, Ellen

2013-03-01

Work disability research has found co-worker support to be a significant but under-recognised aspect of work reintegration (WR) processes. Although co-workers work alongside returning workers, their practical contribution to WR success or failure is often invisible to others. This study aimed to gain further insight into the role and contribution of co-workers in WR interventions. An exploratory qualitative pilot study was conducted in Toronto, Canada in 2011. Three focus groups were conducted with 13 co-workers, recruited for their direct experience of 'working alongside' a returning worker. An iterative data gathering and analysis process occurred. Themes were generated from categories in open-ended interview questions and new issues arising from the data. The findings detail co-workers' practical experiences of WR processes and their reflections on social and work conditions that impacted their participation. Co-workers' capacity to support returning workers was related to the quality of the WR arrangements, the relationship with the returning worker, work culture, and the duration of the required support. Workplace privacy and confidentiality requirements were identified as a key challenge for co-worker participation. The effects on co-workers of WR processes ranged from the opportunity to learn new skills to disillusionment and withdrawal from the workplace. In worst case scenarios, 'ripple effects' including emotional distress, physical injury and termination of co-workers' employment had occurred. Co-workers are not a neutral party in WR procedures. Formalizing the co-worker role to include communication, consideration and recognition might improve co-workers' WR experiences.

[Intervention in dyslexic disorders: phonological awareness training].

PubMed

Etchepareborda, M C

2003-02-01

Taking into account the systems for the treatment of brain information when drawing up a work plan allows us to recreate processing routines that go from multisensory perception to motor, oral and cognitive production, which is the step prior to executive levels of thought, bottom-up and top-down processing systems. In recent years, the use of phonological methods to prevent or resolve reading disorders has become the fundamental mainstay in the treatment of dyslexia. The work is mainly based on phonological proficiency, which enables the patient to detect phonemes (input), to think about them (performance) and to use them to build words (output). Daily work with rhymes, the capacity to listen, the identification of phrases and words, and handling syllables and phonemes allows us to perform a preventive intervention that enhances the capacity to identify letters, phonological analysis and the reading of single words. We present the different therapeutic models that are most frequently employed. Fast For Word (FFW) training helps make progress in phonematic awareness and other linguistic skills, such as phonological awareness, semantics, syntax, grammar, working memory and event sequencing. With Deco-Fon, a programme for training phonological decoding, work is carried out on the auditory discrimination of pure tones, letters and consonant clusters, auditory processing speed, auditory and phonematic memory, and graphophonological processing, which is fundamental for speech, language and reading writing disorders. Hamlet is a programme based on categorisation activities for working on phonological conceptualisation. It attempts to encourage the analysis of the segments of words, syllables or phonemes, and the classification of a certain segment as belonging or not to a particular phonological or orthographical category. Therapeutic approaches in the early phases of reading are oriented towards two poles based on the basic mechanisms underlying the process of learning to read, the grapheme phoneme transformation process and global word recognition. The interventionalist strategies used at school are focused on the use of cognitive strategy techniques. The purpose of these techniques is to teach pupils practical strategies or resources aimed at overcoming specific deficiencies.

Bandwidth and Detection of Packet Length Covert Channels

DTIC Science & Technology

2011-03-01

Shared Resource Matrix ( SRM ): Develop a matrix of all resources on one side and on the other all the processes. Then, determine which process uses which...system calls. This method is similar to that of the SRM . Covert channels have also been created by modulating packet timing, data and headers of net- work...analysis, noninterference analysis, SRM method, and the covert flow tree method [4]. These methods can be used during the design phase of a system. Less

Airway Obstruction Among Latino Poultry Processing Workers in North Carolina

PubMed Central

MIRABELLI, MARIA C.; CHATTERJEE, ARJUN B.; MORA, DANA C.; ARCURY, THOMAS A.; BLOCKER, JILL N.; CHEN, HAIYING; GRZYWACZ, JOSEPH G.; MARÍN, ANTONIO J.; SCHULZ, MARK R.; QUANDT, SARA A.

2015-01-01

This analysis was conducted to evaluate the prevalence of airway obstruction among Latino poultry processing workers. Data were collected from 279 poultry processing workers and 222 other manual laborers via spirometry and interviewer-administered questionnaires. Participants employed in poultry processing reported the activities they perform at work. Participants with forced expiratory volume in 1 second (FEV1) or FEV1/forced expiratory volume (FVC) below the lower limits of normal were categorized as having airway obstruction. Airway obstruction was identified in 13% of poultry processing workers and 12% of the comparison population. Among poultry processing workers, the highest prevalence of airway obstruction (21%) occurred among workers deboning chickens (prevalence ratio: 1.75; 95% confidence interval: 0.97, 3.15). These findings identify variations in the prevalence of airway obstruction across categories of work activities. PMID:24965321

A Reference Model for Software and System Inspections. White Paper

NASA Technical Reports Server (NTRS)

He, Lulu; Shull, Forrest

2009-01-01

Software Quality Assurance (SQA) is an important component of the software development process. SQA processes provide assurance that the software products and processes in the project life cycle conform to their specified requirements by planning, enacting, and performing a set of activities to provide adequate confidence that quality is being built into the software. Typical techniques include: (1) Testing (2) Simulation (3) Model checking (4) Symbolic execution (5) Management reviews (6) Technical reviews (7) Inspections (8) Walk-throughs (9) Audits (10) Analysis (complexity analysis, control flow analysis, algorithmic analysis) (11) Formal method Our work over the last few years has resulted in substantial knowledge about SQA techniques, especially the areas of technical reviews and inspections. But can we apply the same QA techniques to the system development process? If yes, what kind of tailoring do we need before applying them in the system engineering context? If not, what types of QA techniques are actually used at system level? And, is there any room for improvement.) After a brief examination of the system engineering literature (especially focused on NASA and DoD guidance) we found that: (1) System and software development process interact with each other at different phases through development life cycle (2) Reviews are emphasized in both system and software development. (Figl.3). For some reviews (e.g. SRR, PDR, CDR), there are both system versions and software versions. (3) Analysis techniques are emphasized (e.g. Fault Tree Analysis, Preliminary Hazard Analysis) and some details are given about how to apply them. (4) Reviews are expected to use the outputs of the analysis techniques. In other words, these particular analyses are usually conducted in preparation for (before) reviews. The goal of our work is to explore the interaction between the Quality Assurance (QA) techniques at the system level and the software level.

From crisis to development--analysis of air traffic control work processes.

PubMed

Teperi, Anna-Maria; Leppänen, Anneli

2011-03-01

In this study an intervention to improve work processes in air traffic control (ATC) is evaluated. The background was the Finnish air traffic controllers' strike of 1999. The old ways of thinking and acting did not support development of ATC prompting a need for a new kind of working culture in the organisation. Several actions were started. In one of these, ATC work processes were modelled by personnel and development plans concerning work were delivered to top management. Different actors (management, trade union, stakeholders) were interviewed before (n=16) and after the project (n=7). The intervention supported systematic co-operation between different actors in the organisation. However, a follow-up revealed that only a few participants had adopted the idea of continuous work development. Mastery of human factors is crucial in a high reliability work environment such as ATC. But how is the analytical and co-operative aspect kept alive in an organisation that is run by strict international regulation and has a strong technical competence, but is not that strong in collaborative and human aspects? Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Job safety analysis and hazard identification for work accident prevention in para rubber wood sawmills in southern Thailand.

PubMed

Thepaksorn, Phayong; Thongjerm, Supawan; Incharoen, Salee; Siriwong, Wattasit; Harada, Kouji; Koizumi, Akio

2017-11-25

We utilized job safety analysis (JSA) and hazard identification for work accident prevention in Para rubber wood sawmills, which aimed to investigate occupational health risk exposures and assess the health hazards at sawmills in the Trang Province, located in southern Thailand. We conducted a cross-sectional study which included a walk-through survey, JSA, occupational risk assessment, and environmental samplings from March through September 2015 at four Para rubber wood sawmills. We identified potential occupational safety and health hazards associated with six main processes, including: 1) logging and cutting, 2) sawing the lumber into sheets, 3) planing and re-arranging, 4) vacuuming and wood preservation, 5) drying and planks re-arranging, and 6) grading, packing, and storing. Working in sawmills was associated with high risk of wood dust and noise exposure, occupational accidents injuring hands and feet, chemicals and fungicide exposure, and injury due to poor ergonomics or repetitive work. Several high-risk areas were identified from JSA and hazard identification of the working processes, especially high wood dust and noise exposure when sawing lumber into sheets and risk of occupational accidents of the hands and feet when struck by lumber. All workers were strongly recommended to use personal protective equipment in any working processes. Exposures should be controlled using local ventilation systems and reducing noise transmission. We recommend that the results from the risk assessment performed in this study be used to create an action plan for reducing occupational health hazards in Para rubber sawmills.

Temporal patterns of mental model convergence: implications for distributed teams interacting in electronic collaboration spaces.

PubMed

McComb, Sara; Kennedy, Deanna; Perryman, Rebecca; Warner, Norman; Letsky, Michael

2010-04-01

Our objective is to capture temporal patterns in mental model convergence processes and differences in these patterns between distributed teams using an electronic collaboration space and face-to-face teams with no interface. Distributed teams, as sociotechnical systems, collaborate via technology to work on their task. The way in which they process information to inform their mental models may be examined via team communication and may unfold differently than it does in face-to-face teams. We conducted our analysis on 32 three-member teams working on a planning task. Half of the teams worked as distributed teams in an electronic collaboration space, and the other half worked face-to-face without an interface. Using event history analysis, we found temporal interdependencies among the initial convergence points of the multiple mental models we examined. Furthermore, the timing of mental model convergence and the onset of task work discussions were related to team performance. Differences existed in the temporal patterns of convergence and task work discussions across conditions. Distributed teams interacting via an electronic interface and face-to-face teams with no interface converged on multiple mental models, but their communication patterns differed. In particular, distributed teams with an electronic interface required less overall communication, converged on all mental models later in their life cycles, and exhibited more linear cognitive processes than did face-to-face teams interacting verbally. Managers need unique strategies for facilitating communication and mental model convergence depending on teams' degrees of collocation and access to an interface, which in turn will enhance team performance.

Job safety analysis and hazard identification for work accident prevention in para rubber wood sawmills in southern Thailand

PubMed Central

Thepaksorn, Phayong; Thongjerm, Supawan; Incharoen, Salee; Siriwong, Wattasit; Harada, Kouji; Koizumi, Akio

2017-01-01

Objective: We utilized job safety analysis (JSA) and hazard identification for work accident prevention in Para rubber wood sawmills, which aimed to investigate occupational health risk exposures and assess the health hazards at sawmills in the Trang Province, located in southern Thailand. Methods: We conducted a cross-sectional study which included a walk-through survey, JSA, occupational risk assessment, and environmental samplings from March through September 2015 at four Para rubber wood sawmills. Results: We identified potential occupational safety and health hazards associated with six main processes, including: 1) logging and cutting, 2) sawing the lumber into sheets, 3) planing and re-arranging, 4) vacuuming and wood preservation, 5) drying and planks re-arranging, and 6) grading, packing, and storing. Working in sawmills was associated with high risk of wood dust and noise exposure, occupational accidents injuring hands and feet, chemicals and fungicide exposure, and injury due to poor ergonomics or repetitive work. Discussion: Several high-risk areas were identified from JSA and hazard identification of the working processes, especially high wood dust and noise exposure when sawing lumber into sheets and risk of occupational accidents of the hands and feet when struck by lumber. All workers were strongly recommended to use personal protective equipment in any working processes. Exposures should be controlled using local ventilation systems and reducing noise transmission. We recommend that the results from the risk assessment performed in this study be used to create an action plan for reducing occupational health hazards in Para rubber sawmills. PMID:28993571

Monitoring of Students' Interaction in Online Learning Settings by Structural Network Analysis and Indicators.

PubMed

Ammenwerth, Elske; Hackl, Werner O

2017-01-01

Learning as a constructive process works best in interaction with other learners. Support of social interaction processes is a particular challenge within online learning settings due to the spatial and temporal distribution of participants. It should thus be carefully monitored. We present structural network analysis and related indicators to analyse and visualize interaction patterns of participants in online learning settings. We validate this approach in two online courses and show how the visualization helps to monitor interaction and to identify activity profiles of learners. Structural network analysis is a feasible approach for an analysis of the intensity and direction of interaction in online learning settings.

Student nurses' experience working with mentally challenged individuals in South Africa.

PubMed

Janse VAN Rensburg, E S; Poggenpoel, M; Myburgh, C P H

2012-11-01

South African student nurses experience emotional discomfort that might influence their adjustment and coping while working with mentally challenged individuals. Adjustment and coping might impact on their mental health and support needed while working in this challenging context. Student nurses working with mentally challenged individuals experience emotional discomfort that may result in work-related stress. The experiences of student nurses working with mentally challenged individuals were explored and described as it may influence their adjustment, coping and result in work-related stress, impacting on their mental health. The study used a qualitative, explorative, descriptive, contextual research design with a case study as strategy. Thirteen student nurses from a specific higher educational institution in Gauteng, South Africa, participated in the focus group interviews. The researcher utilized reflective journals, a reflective letter, naïve sketches, drawings and field notes to collect data. Data analysis was done according to Tesch's descriptive method of open coding and theme analysis. A central storyline emerged where student nurses described working with mentally challenged individuals as a process of personal transformation that was initiated by an engagement on a deeper emotional level with these individuals. The process of personal transformation started a journey towards the discovery of meaning for the self, as student nurses. Student nurses working in challenging environments during their training may experience emotional discomfort and need additional support in coping and adjustment within this context. The nurse educator plays an important role in providing this support to manage work-related stress as well as in creating learning opportunities for the student nurses working in challenging contexts. © 2012 Blackwell Publishing.

Thread concept for automatic task parallelization in image analysis

NASA Astrophysics Data System (ADS)

Lueckenhaus, Maximilian; Eckstein, Wolfgang

1998-09-01

Parallel processing of image analysis tasks is an essential method to speed up image processing and helps to exploit the full capacity of distributed systems. However, writing parallel code is a difficult and time-consuming process and often leads to an architecture-dependent program that has to be re-implemented when changing the hardware. Therefore it is highly desirable to do the parallelization automatically. For this we have developed a special kind of thread concept for image analysis tasks. Threads derivated from one subtask may share objects and run in the same context but may process different threads of execution and work on different data in parallel. In this paper we describe the basics of our thread concept and show how it can be used as basis of an automatic task parallelization to speed up image processing. We further illustrate the design and implementation of an agent-based system that uses image analysis threads for generating and processing parallel programs by taking into account the available hardware. The tests made with our system prototype show that the thread concept combined with the agent paradigm is suitable to speed up image processing by an automatic parallelization of image analysis tasks.

Object classification and outliers analysis in the forthcoming Gaia mission

NASA Astrophysics Data System (ADS)

Ordóñez-Blanco, D.; Arcay, B.; Dafonte, C.; Manteiga, M.; Ulla, A.

2010-12-01

Astrophysics is evolving towards the rational optimization of costly observational material by the intelligent exploitation of large astronomical databases from both terrestrial telescopes and spatial mission archives. However, there has been relatively little advance in the development of highly scalable data exploitation and analysis tools needed to generate the scientific returns from these large and expensively obtained datasets. Among the upcoming projects of astronomical instrumentation, Gaia is the next cornerstone ESA mission. The Gaia survey foresees the creation of a data archive and its future exploitation with automated or semi-automated analysis tools. This work reviews some of the work that is being developed by the Gaia Data Processing and Analysis Consortium for the object classification and analysis of outliers in the forthcoming mission.

Optimisation Of Cutting Parameters Of Composite Material Laser Cutting Process By Taguchi Method

NASA Astrophysics Data System (ADS)

Lokesh, S.; Niresh, J.; Neelakrishnan, S.; Rahul, S. P. Deepak

2018-03-01

The aim of this work is to develop a laser cutting process model that can predict the relationship between the process input parameters and resultant surface roughness, kerf width characteristics. The research conduct is based on the Design of Experiment (DOE) analysis. Response Surface Methodology (RSM) is used in this work. It is one of the most practical and most effective techniques to develop a process model. Even though RSM has been used for the optimization of the laser process, this research investigates laser cutting of materials like Composite wood (veneer)to be best circumstances of laser cutting using RSM process. The input parameters evaluated are focal length, power supply and cutting speed, the output responses being kerf width, surface roughness, temperature. To efficiently optimize and customize the kerf width and surface roughness characteristics, a machine laser cutting process model using Taguchi L9 orthogonal methodology was proposed.

Isothermal separation processes

NASA Technical Reports Server (NTRS)

England, C.

1982-01-01

The isothermal processes of membrane separation, supercritical extraction and chromatography were examined using availability analysis. The general approach was to derive equations that identified where energy is consumed in these processes and how they compare with conventional separation methods. These separation methods are characterized by pure work inputs, chiefly in the form of a pressure drop which supplies the required energy. Equations were derived for the energy requirement in terms of regular solution theory. This approach is believed to accurately predict the work of separation in terms of the heat of solution and the entropy of mixing. It can form the basis of a convenient calculation method for optimizing membrane and solvent properties for particular applications. Calculations were made on the energy requirements for a membrane process separating air into its components.

Comprehensive analysis of line-edge and line-width roughness for EUV lithography

NASA Astrophysics Data System (ADS)

Bonam, Ravi; Liu, Chi-Chun; Breton, Mary; Sieg, Stuart; Seshadri, Indira; Saulnier, Nicole; Shearer, Jeffrey; Muthinti, Raja; Patlolla, Raghuveer; Huang, Huai

2017-03-01

Pattern transfer fidelity is always a major challenge for any lithography process and needs continuous improvement. Lithographic processes in semiconductor industry are primarily driven by optical imaging on photosensitive polymeric material (resists). Quality of pattern transfer can be assessed by quantifying multiple parameters such as, feature size uniformity (CD), placement, roughness, sidewall angles etc. Roughness in features primarily corresponds to variation of line edge or line width and has gained considerable significance, particularly due to shrinking feature sizes and variations of features in the same order. This has caused downstream processes (Etch (RIE), Chemical Mechanical Polish (CMP) etc.) to reconsider respective tolerance levels. A very important aspect of this work is relevance of roughness metrology from pattern formation at resist to subsequent processes, particularly electrical validity. A major drawback of current LER/LWR metric (sigma) is its lack of relevance across multiple downstream processes which effects material selection at various unit processes. In this work we present a comprehensive assessment of Line Edge and Line Width Roughness at multiple lithographic transfer processes. To simulate effect of roughness a pattern was designed with periodic jogs on the edges of lines with varying amplitudes and frequencies. There are numerous methodologies proposed to analyze roughness and in this work we apply them to programmed roughness structures to assess each technique's sensitivity. This work also aims to identify a relevant methodology to quantify roughness with relevance across downstream processes.

[ASSESSMENT OF EXTREME FACTORS OF SHIFT WORK IN ARCTIC CONDITIONS BY WORKERS WITH DIFFERENT REGULATORY PROCESSES].

PubMed

Korneeva, Ya A; Simonova, N N

2016-01-01

A man working on a shift basis in the Arctic, every day is under the influence of various extreme factors which are inevitable for oil and gas indudtry. To adapt to shift work employees use various resources of the individual. The purpose of research is the determination of personal resources of shift workers to overcome the adverse factors of the environment in the Arctic. The study involved 191 builder of main gas pipelines, working in shifts in the Tyumen region (the length of the shift 52 days of arrival) at the age of 23 to 59 (mean age 34.9 ± 8.1) years. Methods: psychological testing, questioning, observation, descriptive statistics, discriminant step by step analysis. There was revealed the correlation between the subjective assessment of the majority of adverse climatic factors in the regulatory process "assessment of results"; production factors--regulatory processes such as flexibility, autonomy, simulation, and the general level of self-regulation; social factors are more associated with the severity of such regulatory processes, flexibility and evaluation of results.

["I am nuts, but networking": the qualification process for peer support work with mental health users in the psychosocial care network of Rio de Janeiro].

PubMed

Magalhães Dahl, Catarina; de Araújo Carvalho, Maria C; Moscoso Teixeira de Mendonça, Joana; Mitkiewicz de Souza, Flávia; Wainstok Estivil Bustos, Mayra; Fernandes de Cintra Santos, Jacqueline; Marcos Lovisi, Giovani; Tavares Cavalcanti, Maria

2013-01-01

Peer support work has been increasingly incorporated by community services network in the context of mental health care paradigm shift; however, it is a relatively new device in Latin America. In this article, we will describe the qualification process of peer support workers for implementing a psychosocial intervention in the city of Rio de Janeiro. We use the following methodological strategies based on a narrative, participative and dialogical perspective: focus groups, knowledge transmission through a short course; visits to mental health services and field reports. We used a narrative analysis, building the following thematic categories: experience of the recovery process; what helps and what hinders in the recovery process; the role of the family; the role of community mental health services; prejudice among society and family members; the role of peer support work; challenges. From the users' perspective, recovery is tied to ups and downs and family can either help or disturb this process. Prejudice constitutes the main barrier for recovery. To have a social role and participating in training activities facilitate recovery. Users pointed out that it is necessary to have professional support for peer support work.

Cloudy Solar Software - Enhanced Capabilities for Finding, Pre-processing, and Visualizing Solar Data

NASA Astrophysics Data System (ADS)

Istvan Etesi, Laszlo; Tolbert, K.; Schwartz, R.; Zarro, D.; Dennis, B.; Csillaghy, A.

2010-05-01

In our project "Extending the Virtual Solar Observatory (VSO)” we have combined some of the features available in Solar Software (SSW) to produce an integrated environment for data analysis, supporting the complete workflow from data location, retrieval, preparation, and analysis to creating publication-quality figures. Our goal is an integrated analysis experience in IDL, easy-to-use but flexible enough to allow more sophisticated procedures such as multi-instrument analysis. To that end, we have made the transition from a locally oriented setting where all the analysis is done on the user's computer, to an extended analysis environment where IDL has access to services available on the Internet. We have implemented a form of Cloud Computing that uses the VSO search and a new data retrieval and pre-processing server (PrepServer) that provides remote execution of instrument-specific data preparation. We have incorporated the interfaces to the VSO search and the PrepServer into an IDL widget (SHOW_SYNOP) that provides user-friendly searching and downloading of raw solar data and optionally sends search results for pre-processing to the PrepServer prior to downloading the data. The raw and pre-processed data can be displayed with our plotting suite, PLOTMAN, which can handle different data types (light curves, images, and spectra) and perform basic data operations such as zooming, image overlays, solar rotation, etc. PLOTMAN is highly configurable and suited for visual data analysis and for creating publishable figures. PLOTMAN and SHOW_SYNOP work hand-in-hand for a convenient working environment. Our environment supports a growing number of solar instruments that currently includes RHESSI, SOHO/EIT, TRACE, SECCHI/EUVI, HINODE/XRT, and HINODE/EIS.

Hot forming of composite prepreg: Numerical analyses

NASA Astrophysics Data System (ADS)

Guzman-Maldonado, Eduardo; Hamila, Nahiène; Boisse, Philippe; El Azzouzi, Khalid; Tardif, Xavier; Moro, Tanguy; Chatel, Sylvain; Fideu, Paulin

2017-10-01

The work presented here is part of the "FORBANS" project about the Hot Drape Forming (HDF) process consisting of unidirectional prepregs laminates. To ensure a fine comprehension of this process a combination strategy between experiment and numerical analysis is adopted. This paper is focused on the numerical analysis using the finite element method (FEM) with a hyperelastic constitutive law. Each prepreg layer is modelled by shell elements. These elements consider the tension, in-plane shear and bending behaviour of the ply at different temperatures. The contact/friction during the forming process is taken into account using forward increment Lagrange multipliers.

The research of approaches of applying the results of big data analysis in higher education

NASA Astrophysics Data System (ADS)

Kochetkov, O. T.; Prokhorov, I. V.

2017-01-01

This article briefly discusses the approaches to the use of Big Data in the educational process of higher educational institutions. There is a brief description of nature of big data, their distribution in the education industry and new ways to use Big Data as part of the educational process are offered as well. This article describes a method for the analysis of the relevant requests by using Yandex.Wordstat (for laboratory works on the processing of data) and Google Trends (for actual pictures of interest and preference in a higher education institution).

[Performance and safety at work].

PubMed

Bentivegna, M

2010-01-01

The evaluative approach of occupational therapy, centred on the person, on an analysis of performance and an assessment of the work environment, can provide important information for planning interventions to increase safety at work. The reliability of work performance is influenced by many factors, some of which are not directly dependent on humans, such as those related to the environment, to materials, to spaces, to places and to the organization of work; others, however, are closely related to human behaviours. For this reason, for the purpose of ensuring prevention of all harmful events, the process of risk evaluation must also include an analysis of the role of human behaviour and functional capacity. In our daily clinical practice, we Occupational Therapists use work to promote the wellbeing and health of people by involving them in activities, with the knowledge that every occupation is perceived by an individual as something particularly personal and significant.

Human-Automation Integration: Principle and Method for Design and Evaluation

NASA Technical Reports Server (NTRS)

Billman, Dorrit; Feary, Michael

2012-01-01

Future space missions will increasingly depend on integration of complex engineered systems with their human operators. It is important to ensure that the systems that are designed and developed do a good job of supporting the needs of the work domain. Our research investigates methods for needs analysis. We included analysis of work products (plans for regulation of the space station) as well as work processes (tasks using current software), in a case study of Attitude Determination and Control Officers (ADCO) planning work. This allows comparing how well different designs match the structure of the work to be supported. Redesigned planning software that better matches the structure of work was developed and experimentally assessed. The new prototype enabled substantially faster and more accurate performance in plan revision tasks. This success suggests the approach to needs assessment and use in design and evaluation is promising, and merits investigatation in future research.

EEG Based Analysis of Cognitive Load Enhance Instructional Analysis

ERIC Educational Resources Information Center

Dan, Alex; Reiner, Miriam

2017-01-01

One of the recommended approaches in instructional design methods is to optimize the value of working memory capacity and avoid cognitive overload. Educational neuroscience offers novel processes and methodologies to analyze cognitive load based on physiological measures. Observing psychophysiological changes when they occur in response to the…

Measuring Transactiving Memory Systems Using Network Analysis

ERIC Educational Resources Information Center

King, Kylie Goodell

2017-01-01

Transactive memory systems (TMSs) describe the structures and processes that teams use to share information, work together, and accomplish shared goals. First introduced over three decades ago, TMSs have been measured in a variety of ways. This dissertation proposes the use of network analysis in measuring TMS. This is accomplished by describing…

The National Health Educator Job Analysis 2010: Process and Outcomes

ERIC Educational Resources Information Center

Doyle, Eva I.; Caro, Carla M.; Lysoby, Linda; Auld, M. Elaine; Smith, Becky J.; Muenzen, Patricia M.

2012-01-01

The National Health Educator Job Analysis 2010 was conducted to update the competencies model for entry- and advanced-level health educators. Qualitative and quantitative methods were used. Structured interviews, focus groups, and a modified Delphi technique were implemented to engage 59 health educators from diverse work settings and experience…

Targeted and untargeted-metabolite profiling to track the compositional integrity of ginger during processing using digitally-enhanced HPTLC pattern recognition analysis.

PubMed

Ibrahim, Reham S; Fathy, Hoda

2018-03-30

Tracking the impact of commonly applied post-harvesting and industrial processing practices on the compositional integrity of ginger rhizome was implemented in this work. Untargeted metabolite profiling was performed using digitally-enhanced HPTLC method where the chromatographic fingerprints were extracted using ImageJ software then analysed with multivariate Principal Component Analysis (PCA) for pattern recognition. A targeted approach was applied using a new, validated, simple and fast HPTLC image analysis method for simultaneous quantification of the officially recognized markers 6-, 8-, 10-gingerol and 6-shogaol in conjunction with chemometric Hierarchical Clustering Analysis (HCA). The results of both targeted and untargeted metabolite profiling revealed that peeling, drying in addition to storage employed during processing have a great influence on ginger chemo-profile, the different forms of processed ginger shouldn't be used interchangeably. Moreover, it deemed necessary to consider the holistic metabolic profile for comprehensive evaluation of ginger during processing. Copyright © 2018. Published by Elsevier B.V.

Spin, twist and hadron structure in deep inelastic processes

NASA Astrophysics Data System (ADS)

Jaffe, R. L.; Meyer, H.; Piller, G.

These notes provide an introduction to polarization effects in deep inelastic processes in QCD. We emphasize recent work on transverse asymmetries, subdominant effects, and the role of polarization in fragmentation and in purely hadronic processes. After a review of kinematics and some basic tools of short distance analysis, we study the twist, helicity, chirality and transversity dependence of a variety of high energy processes sensitive to the quark and gluon substructure of hadrons.

A Study of Technical Engineering Peer Reviews at NASA

NASA Technical Reports Server (NTRS)

Chao, Lawrence P.; Tumer, Irem Y.; Bell, David G.

2003-01-01

This report describes the state of practices of design reviews at NASA and research into what can be done to improve peer review practices. There are many types of reviews at NASA: required and not, formalized and informal, programmatic and technical. Standing project formal reviews such as the Preliminary Design Review and Critical Design Review are a required part of every project and mission development. However, the technical, engineering peer reviews that support teams' work on such projects are informal, some times ad hoc, and inconsistent across the organization. The goal of this work is to identify best practices and lessons learned from NASA's experience, supported by academic research and methodologies to ultimately improve the process. This research has determined that the organization, composition, scope, and approach of the reviews impact their success. Failure Modes and Effects Analysis (FMEA) can identify key areas of concern before or in the reviews. Product definition tools like the Project Priority Matrix, engineering-focused Customer Value Chain Analysis (CVCA), and project or system-based Quality Function Deployment (QFD) help prioritize resources in reviews. The use of information technology and structured design methodologies can strengthen the engineering peer review process to help NASA work towards error-proofing the design process.

Making Sense of Sensemaking: Requirements of a Cognitive Analysis to Support C2 Decision Support System Design

DTIC Science & Technology

2006-06-01

heart of a distinction within the CSE community with respect to the differences between Cognitive Task Analysis (CTA) and Cognitive Work Analysis...Wesley. Pirolli, P. and Card, S. (2005). The sensemaking process and leverage points for analyst technology as identified through cognitive task analysis . In...D. D., and Elm, W. C. (2000). Cognitive task analysis as bootstrapping multiple converging techniques. In Schraagen, Chipman, and Shalin (Eds

US-VISIT Identity Matching Algorithm Evaluation Program: ADIS Algorithm Evaluation Project Plan Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant, C W; Lenderman, J S; Gansemer, J D

This document is an update to the 'ADIS Algorithm Evaluation Project Plan' specified in the Statement of Work for the US-VISIT Identity Matching Algorithm Evaluation Program, as deliverable II.D.1. The original plan was delivered in August 2010. This document modifies the plan to reflect modified deliverables reflecting delays in obtaining a database refresh. This document describes the revised schedule of the program deliverables. The detailed description of the processes used, the statistical analysis processes and the results of the statistical analysis will be described fully in the program deliverables. The US-VISIT Identity Matching Algorithm Evaluation Program is work performed bymore » Lawrence Livermore National Laboratory (LLNL) under IAA HSHQVT-07-X-00002 P00004 from the Department of Homeland Security (DHS).« less

Optimization and Surface Modification of Al-6351 Alloy Using SiC-Cu Green Compact Electrode by Electro Discharge Coating Process

NASA Astrophysics Data System (ADS)

Chakraborty, Sujoy; Kar, Siddhartha; Dey, Vidyut; Ghosh, Subrata Kumar

2017-06-01

This paper introduces the surface modification of Al-6351 alloy by green compact SiC-Cu electrode using electro-discharge coating (EDC) process. A Taguchi L-16 orthogonal array is employed to investigate the process by varying tool parameters like composition and compaction load and electro-discharge machining (EDM) parameters like pulse-on time and peak current. Material deposition rate (MDR), tool wear rate (TWR) and surface roughness (SR) are measured on the coated specimens. An optimum condition is achieved by formulating overall evaluation criteria (OEC), which combines multi-objective task into a single index. The signal-to-noise (S/N) ratio, and the analysis of variance (ANOVA) is employed to investigate the effect of relevant process parameters. A confirmation test is conducted based on optimal process parameters and experimental results are provided to illustrate the effectiveness of this approach. The modified surface is characterized by optical microscope and X-ray diffraction (XRD) analysis. XRD analysis of the deposited layer confirmed the transfer of tool materials to the work surface and formation of inter-metallic phases. The micro-hardness of the resulting composite layer is also measured which is 1.5-3 times more than work material’s one and highest layer thickness (LT) of 83.644μm has been successfully achieved.

Work ability in nursing: relationship with psychological demands and control over the work.

PubMed

Prochnow, Andrea; Magnago, Tânia Solange Bosi de Souza; Urbanetto, Janete de Souza; Beck, Carmem Lúcia Colomé; Lima, Suzinara Beatriz Soares de; Greco, Patrícia Bitencourt Toscani

2013-01-01

to evaluate the association between psychological demands, control over the work and the reduction of work ability of nursing professionals. this cross-sectional study involved 498 nursing professionals of a university hospital in the State of Rio Grande do Sul, Brazil. Data collection was carried out in 2009 using the Brazilian versions of the Work Ability Index and Job Stress Scale, with logistic regression models used for the data analysis. the prevalence of 43.3% for reduced work ability and 29.7% for high-strain in the job (high psychological demand and low control) were observed. The chances for professionals presenting reduced work ability under high-strain were higher and significant when compared to those classified as being under low-strain, even after adjusting for potential confounders, except for age and gender. a high prevalence of reduced work ability was observed. This evidence indicates the need for investigation and detailed analysis of the psychosocial aspects of the professionals with regard to the health/disease process of nursing professionals.

Returning to work - a long-term process reaching beyond the time frames of multimodal non-specific back pain rehabilitation.

PubMed

Hellman, Therese; Jensen, Irene; Bergström, Gunnar; Busch, Hillevi

2015-01-01

To explore and describe health professionals' experience of working with return to work (RTW) in multimodal rehabilitation for people with non-specific back pain. An interview study using qualitative content analysis. Fifteen participants were interviewed, all were working with multimodal rehabilitation for people with non-specific back pain in eight different rehabilitation units. The participants experienced RTW as a long-term process reaching beyond the time frames of the multimodal rehabilitation (MMR). Their attitudes and, their patients' condition, impacted on their work which focused on psychological and physical well-being as well as participation in everyday life. They often created an action plan for the RTW process, however the responsibility for its realisation was transferred to other actors. The participants described limited interventions in connection with patients' workplaces. Recommended support in the RTW process in MMR comprises the provision of continuous supervision of vocational issues for the health care professionals, the development of guidelines and a checklist for how to work in close collaboration with patients' workplaces and employers, the provision of long-term follow-up in relation to the patients' work, and the development of proper interventions in order to promote transitions between all the different actors involved. Rehabilitation programs targeting return to work (RTW) for people with non-specific back pain needs to include features concretely focusing on vocational issues. Health and RTW is often seen as a linear process in which health comes before RTW. Rehabilitation programs could be tailored to better address the reciprocal relationship between health and work, in which they are interconnected and affect each other. The RTW process is reaching beyond the time frames of the multimodal rehabilitation but further support from the patients are asked for. The rehabilitation programs needs to be designed to provide long-term follow-up in relation to the patients' work.

FINDING A METHOD FOR THE MADNESS: A COMPARATIVE ANALYSIS OF STRATEGIC DESIGN METHODOLOGIES

DTIC Science & Technology

2017-06-01

FINDING A METHOD FOR THE MADNESS: A COMPARATIVE ANALYSIS OF STRATEGIC DESIGN METHODOLOGIES BY AMANDA DONNELLY A THESIS...work develops a comparative model for strategic design methodologies, focusing on the primary elements of vision, time, process, communication and...collaboration, and risk assessment. My analysis dissects and compares three potential design methodologies including, net assessment, scenarios and

Operational Analysis of Time-Optimal Maneuvering for Imaging Spacecraft

DTIC Science & Technology

2013-03-01

imaging spacecraft. The analysis is facilitated through the use of AGI’s Systems Tool Kit ( STK ) software. An Analytic Hierarchy Process (AHP)-based...the Singapore-developed X-SAT imaging spacecraft. The analysis is facilitated through the use of AGI’s Systems Tool Kit ( STK ) software. An Analytic...89  B.  FUTURE WORK................................................................................. 90  APPENDIX A. STK DATA AND BENEFIT

Flexibility and Coordination among Acts of Visualization and Analysis in a Pattern Generalization Activity

ERIC Educational Resources Information Center

Nilsson, Per; Juter, Kristina

2011-01-01

This study aims at exploring processes of flexibility and coordination among acts of visualization and analysis in students' attempt to reach a general formula for a three-dimensional pattern generalizing task. The investigation draws on a case-study analysis of two 15-year-old girls working together on a task in which they are asked to calculate…

Working conditions in home care: negotiating race and class boundaries in gendered work.

PubMed

Neysmith, S M; Aronson, J

1997-01-01

Home care work in metropolitan areas is a source of employment for immigrant women of color. Service work of this type intertwines domestic and caring labor in ways that reinforce the historically gendered and racialized nature of the work. Such macro level economic and political issues are played out at the micro level of daily service provided within elderly clients' homes. A study of these processes in home care work was carried out in urban southern Ontario in two nonprofit home care agencies. In-depth interviews and focus groups held with visible minority home care workers suggested that workers deal daily with racist attitudes and behaviors from clients and their families; agencies recognize these oppressive processes but usually handle them on a case-by-case basis through supervisors; and home care workers handle racism on the job as they do in their off-work hours-by avoidance, situating incidents within an analysis of the circumstances of elderly clients, setting boundaries on discussions, and occasionally, confrontation.

Analysis of High Grazing Angle Sea-clutter with the KK-Distribution

DTIC Science & Technology

2013-11-01

work undertaken at the DSTO in characterising the maritime environment from high altitude airborne platforms. The focus of this report is to characterise...multichannel synthetic aperture radar through Adelaide University. He has worked at the DSTO as an RF engineer in the missile simulation centre, as a...with the Cooperative Research Centre for Sensor, Signal and Information Processing where he worked in the Pattern Recognition Group on the application

The Endurance of Children's Working Memory: A Recall Time Analysis

ERIC Educational Resources Information Center

Towse, John N.; Hitch, Graham J.; Hamilton, Z.; Pirrie, Sarah

2008-01-01

We analyze the timing of recall as a source of information about children's performance in complex working memory tasks. A group of 8-year-olds performed a traditional operation span task in which sequence length increased across trials and an operation period task in which processing requirements were extended across trials of constant sequence…

The Systemic-Structural Theory of Activity: Applications to the Study of Human Work

ERIC Educational Resources Information Center

Bedny, Gregory Z.; Harris, Steven Robert

2005-01-01

This article offers an introduction to the central concepts and principles of the Systemic-Structural Theory of Activity (SSTA), an activity-theoretical approach specifically tailored to the analysis and design of human work. In activity theory, cognition is understood both as a process and as a structured system of actions. Building on the…

Generalizations Related to Concepts Important for Youth Orientation to the World of Work.

ERIC Educational Resources Information Center

Warren, Mary A.; And Others

A basic first step in building a curriculum contributing to the orientation of youth to world of work is identification of concepts important to that orientation. In this study, the generalizations within the concept framework were identified through a developmental process of analysis and synthesis, including a review of current literature, a…

Phase transitions and structural formation of PEG-PCL-PEG copolymer in the processes of fused deposition 3D printing

NASA Astrophysics Data System (ADS)

Dunaev, A.; Mariyanac, A.; Mironov, A.; Mironova, O.; Popov, V.; Syachina, M.

2018-04-01

In present work the analysis of thermal field distribution and thermal analysis were used to study phase and structural transformations in the block copolymer of polycaprolactone and polyethylene glycol in the process of scaffolds fabrication for tissue engineering using fused deposition modeling. It was shown that the intact polymer has a noticeable thermal history and formed degree of crystallinity which is close to its equilibrium value, while the microstructure of the polymer stays unchanged.

Applying circular economy innovation theory in business process modeling and analysis

NASA Astrophysics Data System (ADS)

Popa, V.; Popa, L.

2017-08-01

The overall aim of this paper is to develop a new conceptual framework for business process modeling and analysis using circular economy innovative theory as a source for business knowledge management. The last part of the paper presents an author’s proposed basic structure for a new business models applying circular economy innovation theories. For people working on new innovative business models in the field of the circular economy this paper provides new ideas for clustering their concepts.

Social network supported process recommender system.

PubMed

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

Fracture Analysis of Cast Steel Sling

NASA Astrophysics Data System (ADS)

Li, Xinghui

2018-02-01

The fracture reasons of ZG270-500 cast steel sling are analyzed through such means as macroscopic morphology analysis, chemical composition analysis, and microscopic metallography analysis. Results: coarse Widmanstatten structure and casting defects occurring in casting and subsequent heat treatment process reduce the strength, plasticity and toughness of the steel, which is the main reason of brittle fracture of the sling during work, and corresponding improvement suggestions are proposed herein.

Vocational reintegration following spinal cord injury: expectations, participation and interventions.

PubMed

Schönherr, M C; Groothoff, J W; Mulder, G A; Schoppen, T; Eisma, W H

2004-03-01

Survey. To explore the process of reintegration in paid work following a traumatic spinal cord injury (SCI), including the role of early expectations of individual patients regarding return to work, indicators of success of job reintegration and a description of reintegration interventions and barriers. Dutch rehabilitation centre with special department for patients with spinal cord injuries. Descriptive analysis of data gathered by a mailed questionnaire, which was returned by 57 persons (response 83%) with traumatic SCI, aged 18-60 years, and data of earlier expectations reported by the individual patients during the rehabilitation admission following SCI from 1990 to 1998. Of 49 respondents who were employed at the moment of the SCI, 45% expected to be able to resume work. These positive expectations were associated with a higher educational level. In 67%, return to work was successful. The chance to reintegrate successfully was better if the patient expected to resume work. Logistic regression analysis did not reveal other significant indicators. About one-third of the 49 respondents working preinjury followed vocational retraining, which was successful for most of them so far. In the majority of work situations modifications have been made, such as job adaptations and reduction of working hours. Several unmet needs regarding reintegration interventions were also reported. Positive expectations regarding resumption of work after a SCI are an important indicator of successful reintegration in work. An active role of the rehabilitation team is recommended in drawing up a vocational reintegration plan to prepare the patient, the employer and professionals involved in the reintegration process.

"Poetry Makes Nothing Happen:" Creative Writing and the English Classroom

ERIC Educational Resources Information Center

Morgan, Wendy

2006-01-01

This paper examines the processes of creative writing, exploring in particular how intuition and analysis, unconscious and conscious, work together, and how the social and the personal are involved in these processes. The author discusses her experience of writing a sustained narrative poem with lyrical elements, and then as a teacher-educator…

Forest statistics for Northwest Florida, 1987

Treesearch

Mark J. Brown

1987-01-01

The Forest Inventory and Analysis (Forest Survey) Research Work Unit at the Southeastern Forest Experiment Station recently conducted a review of its data processing procedures. During this process, a computer error was discovered which led to inflated estimates of annual removals, net annual growth, and annual mortality for the 1970-1980 remeasurement period in...

Tracking the Muse: The Writing Processes of Poets.

ERIC Educational Resources Information Center

Armstrong, Cherryl

Focusing on the nature of revision in lyric poetry, a study investigated poets' writing processes. Primary data sources included poets' commentary, letters, recorded conversations, interviews, and essays. Two case studies were also conducted--an evaluation of two poets at work (one a novice and one an experienced poet) and a textual analysis of…

Machine-Aided Indexing. Technical Progress Report for Period January 1967-June 1969.

ERIC Educational Resources Information Center

Klingbiel, Paul H.

Working toward the goal of an automatic indexing system which is truly competitive with human indexing in cost, time and comprehensiveness the Machine-Aided Indexing (MAI) process was developed at the Defense Documentation Center (DDC). This indexing process uses linguistic techniques but does not require complete syntactic analysis of sentences…

Cognitive work analysis to evaluate the problem of patient falls in an inpatient setting

PubMed Central

Lopez, Karen Dunn; Cary, Michael P; Kanak, Mary F

2010-01-01

Objective To identify factors in the nursing work domain that contribute to the problem of inpatient falls, aside from patient risk, using cognitive work analysis. Design A mix of qualitative and quantitative methods were used to identify work constraints imposed on nurses, which may underlie patient falls. Measurements Data collection was done on a neurology unit staffed by 27 registered nurses and utilized field observations, focus groups, time–motion studies and written surveys (AHRQ Hospital Survey on Patient Culture, NASA-TLX, and custom Nursing Knowledge of Fall Prevention Subscale). Results Four major constraints were identified that inhibit nurses' ability to prevent patient falls. All constraints relate to work processes and the physical work environment, opposed to safety culture or nursing knowledge, as currently emphasized. The constraints were: cognitive ‘head data’, temporal workload, inconsistencies in written and verbal transfer of patient data, and limitations in the physical environment. To deal with these constraints, the nurses tend to employ four workarounds: written and mental chunking schemas, bed alarms, informal querying of the previous care nurse, and informal video and audio surveillance. These workarounds reflect systemic design flaws and may only be minimally effective in decreasing risk to patients. Conclusion Cognitive engineering techniques helped identify seemingly hidden constraints in the work domain that impact the problem of patient falls. System redesign strategies aimed at improving work processes and environmental limitations hold promise for decreasing the incidence of falls in inpatient nursing units. PMID:20442150

Cognitive work analysis to evaluate the problem of patient falls in an inpatient setting.

PubMed

Lopez, Karen Dunn; Gerling, Gregory J; Cary, Michael P; Kanak, Mary F

2010-01-01

To identify factors in the nursing work domain that contribute to the problem of inpatient falls, aside from patient risk, using cognitive work analysis. A mix of qualitative and quantitative methods were used to identify work constraints imposed on nurses, which may underlie patient falls. Data collection was done on a neurology unit staffed by 27 registered nurses and utilized field observations, focus groups, time-motion studies and written surveys (AHRQ Hospital Survey on Patient Culture, NASA-TLX, and custom Nursing Knowledge of Fall Prevention Subscale). Four major constraints were identified that inhibit nurses' ability to prevent patient falls. All constraints relate to work processes and the physical work environment, opposed to safety culture or nursing knowledge, as currently emphasized. The constraints were: cognitive 'head data', temporal workload, inconsistencies in written and verbal transfer of patient data, and limitations in the physical environment. To deal with these constraints, the nurses tend to employ four workarounds: written and mental chunking schemas, bed alarms, informal querying of the previous care nurse, and informal video and audio surveillance. These workarounds reflect systemic design flaws and may only be minimally effective in decreasing risk to patients. Cognitive engineering techniques helped identify seemingly hidden constraints in the work domain that impact the problem of patient falls. System redesign strategies aimed at improving work processes and environmental limitations hold promise for decreasing the incidence of falls in inpatient nursing units.

Work-related musculoskeletal disorders (WMDs) risk assessment at core assembly production of electronic components manufacturing company

NASA Astrophysics Data System (ADS)

Yahya, N. M.; Zahid, M. N. O.

2018-03-01

This study conducted to assess the work-related musculoskeletal disorders (WMDs) among the workers at core assembly production in an electronic components manufacturing company located in Pekan, Pahang, Malaysia. The study is to identify the WMDs risk factor and risk level. A set of questionnaires survey based on modified Nordic Musculoskeletal Disorder Questionnaires have been distributed to respective workers to acquire the WMDs risk factor identification. Then, postural analysis was conducted in order to measure the respective WMDs risk level. The analysis were based on two ergonomics assessment tools; Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). The study found that 30 respondents out of 36 respondents suffered from WMDs especially at shoulder, wrists and lower back. The WMDs risk have been identified from unloading process, pressing process and winding process. In term of the WMDs risk level, REBA and RULA assessment tools have indicated high risk level to unloading and pressing process. Thus, this study had established the WMDs risk factor and risk level of core assembly production in an electronic components manufacturing company at Malaysia environment.

Using Framework Analysis in nursing research: a worked example.

PubMed

Ward, Deborah J; Furber, Christine; Tierney, Stephanie; Swallow, Veronica

2013-11-01

To demonstrate Framework Analysis using a worked example and to illustrate how criticisms of qualitative data analysis including issues of clarity and transparency can be addressed. Critics of the analysis of qualitative data sometimes cite lack of clarity and transparency about analytical procedures; this can deter nurse researchers from undertaking qualitative studies. Framework Analysis is flexible, systematic, and rigorous, offering clarity, transparency, an audit trail, an option for theme-based and case-based analysis and for readily retrievable data. This paper offers further explanation of the process undertaken which is illustrated with a worked example. Data were collected from 31 nursing students in 2009 using semi-structured interviews. The data collected are not reported directly here but used as a worked example for the five steps of Framework Analysis. Suggestions are provided to guide researchers through essential steps in undertaking Framework Analysis. The benefits and limitations of Framework Analysis are discussed. Nurses increasingly use qualitative research methods and need to use an analysis approach that offers transparency and rigour which Framework Analysis can provide. Nurse researchers may find the detailed critique of Framework Analysis presented in this paper a useful resource when designing and conducting qualitative studies. Qualitative data analysis presents challenges in relation to the volume and complexity of data obtained and the need to present an 'audit trail' for those using the research findings. Framework Analysis is an appropriate, rigorous and systematic method for undertaking qualitative analysis. © 2013 Blackwell Publishing Ltd.

Process feasibility study in support of silicon material task 1

NASA Technical Reports Server (NTRS)

Li, K. Y.; Hansen, K. C.; Yaws, C. L.

1978-01-01

Process system properties are analyzed for materials involved in the alternate processes under consideration for solar cell grade silicon. The following property data are reported for trichlorosilane: critical constants, vapor pressure, heat of vaporization, gas heat capacity, liquid heat capacity, density, surface tension, viscosity, thermal conductivity, heat of formation, and Gibb's free energy of formation. Work continued on the measurement of gas viscosity values of silicon source materials. Gas phase viscosity values for silicon tetrafluoride between 40 C and 200 C were experimentally determined. Major efforts were expended on completion of the preliminary economic analysis of the silane process. Cost, sensitivity and profitability analysis results are presented based on a preliminary process design of a plant to produce 1,000 metric tons/year of silicon by the revised process.

Who cares? Offering emotion work as a 'gift' in the nursing labour process.

PubMed

Bolton, S C

2000-09-01

Who cares? Offering emotion work as a 'gift' in the nursing labour process The emotional elements of the nursing labour process are being recognized increasingly. Many commentators stress that nurses' 'emotional labour' is hard and productive work and should be valued in the same way as physical or technical labour. However, the term 'emotional labour' fails to conceptualize the many occasions when nurses not only work hard on their emotions in order to present the detached face of a professional carer, but also to offer authentic caring behaviour to patients in their care. Using qualitative data collected from a group of gynaecology nurses in an English National Health Service (NHS) Trust hospital, this paper argues that nursing work is emotionally complex and may be better understood by utilizing a combination of Hochschild's concepts: emotion work as a 'gift' in addition to 'emotional labour'. The gynaecology nurses in this study describe their work as 'emotionful' and therefore it could be said that this particular group of nurses represent a distinct example. Nevertheless, though it is impossible to generalize from limited data, the research presented in this paper does highlight the emotional complexity of the nursing labour process, expands the current conceptual analysis, and offers a path for future research. The examination further emphasizes the need to understand and value the motivations behind nurses' emotion work and their wish to maintain caring as a central value in professional nursing.

[Local fractal analysis of noise-like time series by all permutations method for 1-115 min periods].

PubMed

Panchelyuga, V A; Panchelyuga, M S

2015-01-01

Results of local fractal analysis of 329-per-day time series of 239Pu alpha-decay rate fluctuations by means of all permutations method (APM) are presented. The APM-analysis reveals in the time series some steady frequency set. The coincidence of the frequency set with the Earth natural oscillations was demonstrated. A short review of works by different authors who analyzed the time series of fluctuations in processes of different nature is given. We have shown that the periods observed in those works correspond to the periods revealed in our study. It points to a common mechanism of the phenomenon observed.

[Management policy-making for work and education in health: the case of the Bahia State Health Department, Brazil, 2007-2008].

PubMed

Pinto, Isabela Cardoso de Matos; Teixeira, Carmen Fontes

2011-09-01

The construction of Brazil's Unified National Health System (SUS) has raised a set of challenges for the health sector's administrators and personnel, including issues of work management and continuing education for health workers, in view of the financial, political, and organizational constraints in the process of changing the healthcare model. The current study aimed to analyze the process of formulating the Health Work and Education Management Policy by the Bahia State Health Department. Public policy cycle was used as the theoretical framework. The study analyzed data from institutional documents and records of participant observation by one of the authors. The results include mapping the governmental and nongovernmental stakeholders that participated in the process. The analysis highlights a series of problems in the SUS in Bahia related to work management and health workers' profile, taken as the point of departure for priority-setting in the State Strategic Agenda and Health Plan for 2008-2011.

Thermodynamic analysis of a thermal storage unit under the influence of nano-particles added to the phase change material and/or the working fluid

NASA Astrophysics Data System (ADS)

Abolghasemi, Mehran; Keshavarz, Ali; Mehrabian, Mozaffar Ali

2012-11-01

The thermal storage unit consists of two concentric cylinders where the working fluid flows through the internal cylinder and the annulus is filled with a phase change material. The system carries out a cyclic operation; each cycle consists of two processes. In the charging process the hot working fluid enters the internal cylinder and transfers heat to the phase change material. In the discharging process the cold working fluid enters the internal cylinder and absorbs heat from the phase change material. The differential equations governing the heat transfer between the two media are solved numerically. The numerical results are compared with the experimental results available in the literature. The performance of an energy storage unit is directly related to the thermal conductivity of nano-particles. The energy consumption of a residential unit whose energy is supplied by a thermal storage system can be reduced by 43 % when using nano-particles.

Migrants' decision-process shaping work destination choice: the case of long-term care work in the United Kingdom and Norway.

PubMed

Christensen, Karen; Hussein, Shereen; Ismail, Mohamed

2017-09-01

Escalating demands for formal long-term care (LTC) result in the reliance on migrant workers in many developed countries. Within Europe, this is currently framed by progressive European immigration policies favouring inter-European mobility. Using the UK and Norway as case studies, this article has two main aims: (1) to document changes in the contribution of European Union (EU) migrants to the LTC sectors in Western Europe, and (2) to gain further understanding of migrants' decision-processes relating to destination and work choices. The UK and Norway provide examples of two European countries with different immigration histories, welfare regimes, labour market characteristics and cultural values, offering a rich comparison platform. The analysis utilizes national workforce datasets and data obtained from migrants working in the LTC sector in the UK and Norway ( n  = 248) and other stakeholders ( n  = 136). The analysis establishes a significant increase in the contribution of EU migrants (particularly from Eastern Europe) to the LTC sector in both the UK and Norway despite their different welfare regimes. The findings also highlight how migrant care workers develop rational decision-processes influenced by subjective perspectives of investments and returns within a context of wider structural migration barriers. The latter includes welfare and social care policies framing the conditions for migrants' individual actions.

Working together. An interdisciplinary approach to dying patients in a palliative care unit.

PubMed

Minetti, Aurora

2011-12-01

Multiprofessional teams have become in recent years one of the distinguishing features of services, where professionals with different competences work together. The core of our interest is addressed to the équipe of a palliative care ward; in particular, to that series of working activities that consists of communicative acts, as équipe meetings, for instance. Our research focuses on the analysis of the process by which the development of knowledge in multiprofessional practice is built to establish more information on recurrent patterns in the interaction and connect them to the specific context that these are shaped by. In this sense we will underline how components of knowing are shared among team members in constructing medical prognosis and we will analyse the connection among language processes, cognitive activities and social structures. More specifically, we will study the role of language and the context in the definition of linguistic acts in cognitive activities and in hierarchies involved in decision-making processes by exploring and pointing out how it is organised and structured. In particular through the study of talk-in-interaction where interchange of information is realised, we will emphasise how, in the multiprofessional équipe meeting, the realisation of practices and the knowledge useful to collaborative management of ward working life are established. To reach this aim, we adopted an ethnographic approach connected to the analysis of the situated interaction.

Task-technology fit of video telehealth for nurses in an outpatient clinic setting.

PubMed

Cady, Rhonda G; Finkelstein, Stanley M

2014-07-01

Incorporating telehealth into outpatient care delivery supports management of consumer health between clinic visits. Task-technology fit is a framework for understanding how technology helps and/or hinders a person during work processes. Evaluating the task-technology fit of video telehealth for personnel working in a pediatric outpatient clinic and providing care between clinic visits ensures the information provided matches the information needed to support work processes. The workflow of advanced practice registered nurse (APRN) care coordination provided via telephone and video telehealth was described and measured using a mixed-methods workflow analysis protocol that incorporated cognitive ethnography and time-motion study. Qualitative and quantitative results were merged and analyzed within the task-technology fit framework to determine the workflow fit of video telehealth for APRN care coordination. Incorporating video telehealth into APRN care coordination workflow provided visual information unavailable during telephone interactions. Despite additional tasks and interactions needed to obtain the visual information, APRN workflow efficiency, as measured by time, was not significantly changed. Analyzed within the task-technology fit framework, the increased visual information afforded by video telehealth supported the assessment and diagnostic information needs of the APRN. Telehealth must provide the right information to the right clinician at the right time. Evaluating task-technology fit using a mixed-methods protocol ensured rigorous analysis of fit within work processes and identified workflows that benefit most from the technology.

Analysis and modeling of wafer-level process variability in 28 nm FD-SOI using split C-V measurements

NASA Astrophysics Data System (ADS)

Pradeep, Krishna; Poiroux, Thierry; Scheer, Patrick; Juge, André; Gouget, Gilles; Ghibaudo, Gérard

2018-07-01

This work details the analysis of wafer level global process variability in 28 nm FD-SOI using split C-V measurements. The proposed approach initially evaluates the native on wafer process variability using efficient extraction methods on split C-V measurements. The on-wafer threshold voltage (VT) variability is first studied and modeled using a simple analytical model. Then, a statistical model based on the Leti-UTSOI compact model is proposed to describe the total C-V variability in different bias conditions. This statistical model is finally used to study the contribution of each process parameter to the total C-V variability.

Evaluation of work posture and quantification of fatigue by Rapid Entire Body Assessment (REBA)

NASA Astrophysics Data System (ADS)

Rizkya, I.; Syahputri, K.; Sari, R. M.; Anizar; Siregar, I.

2018-02-01

Work related musculoskeletal disorders (MSDs), poor body postures, and low back injuries are the most common problems occurring in many industries including small-medium industries. This study presents assessment and evaluation of ergonomic postures of material handling worker. That evaluation was carried out using REBA (Rapid Entire Body Assessment). REBA is a technique to quantize the fatigue experienced by the worker while manually lifting loads. Fatigue due to abnormal work posture leads to complaints of labor-perceived pain. REBA methods were used to an assessment of working postures for the existing process by a procedural analysis of body postures involved. This study shows that parts of the body have a high risk of work are the back, neck, and upper arms with REBA score 9, so action should be taken as soon as possible. Controlling actions were implemented to those process with high risk then substantial risk reduction was achieved.

The Separation of Blood Components Using Standing Surface Acoustic Waves (SSAWs) Microfluidic Devices: Analysis and Simulation.

PubMed

Soliman, Ahmed M; Eldosoky, Mohamed A; Taha, Taha E

2017-03-29

The separation of blood components (WBCs, RBCs, and platelets) is important for medical applications. Recently, standing surface acoustic wave (SSAW) microfluidic devices are used for the separation of particles. In this paper, the design analysis of SSAW microfluidics is presented. Also, the analysis of SSAW force with Rayleigh angle effect and its attenuation in liquid-loaded substrate, viscous drag force, hydrodynamic force, and diffusion force are explained and analyzed. The analyses are provided for selecting the piezoelectric material, width of the main microchannel, working area of SAW, wavelength, minimum input power required for the separation process, and widths of outlet collecting microchannels. The design analysis of SSAW microfluidics is provided for determining the minimum input power required for the separation process with appropriated the displacement contrast of the particles.The analyses are applied for simulation the separation of blood components. The piezoelectric material, width of the main microchannel, working area of SAW, wavelength, and minimum input power required for the separation process are selected as LiNbO₃, 120 μm, 1.08 mm², 300 μm, 371 mW. The results are compared to other published results. The results of these simulations achieve minimum power consumption, less complicated setup, and high collecting efficiency. All simulation programs are built by MATLAB.

The Separation of Blood Components Using Standing Surface Acoustic Waves (SSAWs) Microfluidic Devices: Analysis and Simulation

PubMed Central

Soliman, Ahmed M.; Eldosoky, Mohamed A.; Taha, Taha E.

2017-01-01

The separation of blood components (WBCs, RBCs, and platelets) is important for medical applications. Recently, standing surface acoustic wave (SSAW) microfluidic devices are used for the separation of particles. In this paper, the design analysis of SSAW microfluidics is presented. Also, the analysis of SSAW force with Rayleigh angle effect and its attenuation in liquid-loaded substrate, viscous drag force, hydrodynamic force, and diffusion force are explained and analyzed. The analyses are provided for selecting the piezoelectric material, width of the main microchannel, working area of SAW, wavelength, minimum input power required for the separation process, and widths of outlet collecting microchannels. The design analysis of SSAW microfluidics is provided for determining the minimum input power required for the separation process with appropriated the displacement contrast of the particles.The analyses are applied for simulation the separation of blood components. The piezoelectric material, width of the main microchannel, working area of SAW, wavelength, and minimum input power required for the separation process are selected as LiNbO3, 120 μm, 1.08 mm2, 300 μm, 371 mW. The results are compared to other published results. The results of these simulations achieve minimum power consumption, less complicated setup, and high collecting efficiency. All simulation programs are built by MATLAB. PMID:28952506

Frequency Domain Analysis of Sensor Data for Event Classification in Real-Time Robot Assisted Deburring

PubMed Central

Pappachan, Bobby K; Caesarendra, Wahyu; Tjahjowidodo, Tegoeh; Wijaya, Tomi

2017-01-01

Process monitoring using indirect methods relies on the usage of sensors. Using sensors to acquire vital process related information also presents itself with the problem of big data management and analysis. Due to uncertainty in the frequency of events occurring, a higher sampling rate is often used in real-time monitoring applications to increase the chances of capturing and understanding all possible events related to the process. Advanced signal processing methods are used to further decipher meaningful information from the acquired data. In this research work, power spectrum density (PSD) of sensor data acquired at sampling rates between 40–51.2 kHz was calculated and the corelation between PSD and completed number of cycles/passes is presented. Here, the progress in number of cycles/passes is the event this research work intends to classify and the algorithm used to compute PSD is Welch’s estimate method. A comparison between Welch’s estimate method and statistical methods is also discussed. A clear co-relation was observed using Welch’s estimate to classify the number of cycles/passes. The paper also succeeds in classifying vibration signal generated by the spindle from the vibration signal acquired during finishing process. PMID:28556809

A DMAIC approach for process capability improvement an engine crankshaft manufacturing process

NASA Astrophysics Data System (ADS)

Sharma, G. V. S. S.; Rao, P. Srinivasa

2014-05-01

The define-measure-analyze-improve-control (DMAIC) approach is a five-strata approach, namely DMAIC. This approach is the scientific approach for reducing the deviations and improving the capability levels of the manufacturing processes. The present work elaborates on DMAIC approach applied in reducing the process variations of the stub-end-hole boring operation of the manufacture of crankshaft. This statistical process control study starts with selection of the critical-to-quality (CTQ) characteristic in the define stratum. The next stratum constitutes the collection of dimensional measurement data of the CTQ characteristic identified. This is followed by the analysis and improvement strata where the various quality control tools like Ishikawa diagram, physical mechanism analysis, failure modes effects analysis and analysis of variance are applied. Finally, the process monitoring charts are deployed at the workplace for regular monitoring and control of the concerned CTQ characteristic. By adopting DMAIC approach, standard deviation is reduced from 0.003 to 0.002. The process potential capability index ( C P) values improved from 1.29 to 2.02 and the process performance capability index ( C PK) values improved from 0.32 to 1.45, respectively.

Modeling of outpatient prescribing process in iran: a gateway toward electronic prescribing system.

PubMed

Ahmadi, Maryam; Samadbeik, Mahnaz; Sadoughi, Farahnaz

2014-01-01

Implementation of electronic prescribing system can overcome many problems of the paper prescribing system, and provide numerous opportunities of more effective and advantageous prescribing. Successful implementation of such a system requires complete and deep understanding of work content, human force, and workflow of paper prescribing. The current study was designed in order to model the current business process of outpatient prescribing in Iran and clarify different actions during this process. In order to describe the prescribing process and the system features in Iran, the methodology of business process modeling and analysis was used in the present study. The results of the process documentation were analyzed using a conceptual model of workflow elements and the technique of modeling "As-Is" business processes. Analysis of the current (as-is) prescribing process demonstrated that Iran stood at the first levels of sophistication in graduated levels of electronic prescribing, namely electronic prescription reference, and that there were problematic areas including bottlenecks, redundant and duplicated work, concentration of decision nodes, and communicative weaknesses among stakeholders of the process. Using information technology in some activities of medication prescription in Iran has not eliminated the dependence of the stakeholders on paper-based documents and prescriptions. Therefore, it is necessary to implement proper system programming in order to support change management and solve the problems in the existing prescribing process. To this end, a suitable basis should be provided for reorganization and improvement of the prescribing process for the future electronic systems.

Does the Component Processes Task Assess Text-Based Inferences Important for Reading Comprehension? A Path Analysis in Primary School Children

PubMed Central

Wassenburg, Stephanie I.; de Koning, Björn B.; de Vries, Meinou H.; van der Schoot, Menno

2016-01-01

Using a component processes task (CPT) that differentiates between higher-level cognitive processes of reading comprehension provides important advantages over commonly used general reading comprehension assessments. The present study contributes to further development of the CPT by evaluating the relative contributions of its components (text memory, text inferencing, and knowledge integration) and working memory to general reading comprehension within a single study using path analyses. Participants were 173 third- and fourth-grade children. As hypothesized, knowledge integration was the only component of the CPT that directly contributed to reading comprehension, indicating that the text-inferencing component did not assess inferential processes related to reading comprehension. Working memory was a significant predictor of reading comprehension over and above the component processes. Future research should focus on finding ways to ensure that the text-inferencing component taps into processes important for reading comprehension. PMID:27378989

Music Perception in Dementia.

PubMed

Golden, Hannah L; Clark, Camilla N; Nicholas, Jennifer M; Cohen, Miriam H; Slattery, Catherine F; Paterson, Ross W; Foulkes, Alexander J M; Schott, Jonathan M; Mummery, Catherine J; Crutch, Sebastian J; Warren, Jason D

2017-01-01

Despite much recent interest in music and dementia, music perception has not been widely studied across dementia syndromes using an information processing approach. Here we addressed this issue in a cohort of 30 patients representing major dementia syndromes of typical Alzheimer's disease (AD, n = 16), logopenic aphasia (LPA, an Alzheimer variant syndrome; n = 5), and progressive nonfluent aphasia (PNFA; n = 9) in relation to 19 healthy age-matched individuals. We designed a novel neuropsychological battery to assess perception of musical patterns in the dimensions of pitch and temporal information (requiring detection of notes that deviated from the established pattern based on local or global sequence features) and musical scene analysis (requiring detection of a familiar tune within polyphonic harmony). Performance on these tests was referenced to generic auditory (timbral) deviance detection and recognition of familiar tunes and adjusted for general auditory working memory performance. Relative to healthy controls, patients with AD and LPA had group-level deficits of global pitch (melody contour) processing while patients with PNFA as a group had deficits of local (interval) as well as global pitch processing. There was substantial individual variation within syndromic groups. Taking working memory performance into account, no specific deficits of musical temporal processing, timbre processing, musical scene analysis, or tune recognition were identified. The findings suggest that particular aspects of music perception such as pitch pattern analysis may open a window on the processing of information streams in major dementia syndromes. The potential selectivity of musical deficits for particular dementia syndromes and particular dimensions of processing warrants further systematic investigation.

Expensive Enrichment

ERIC Educational Resources Information Center

Resnikoff, Marvin

1975-01-01

This article presents an economic analysis of the nuclear fuel reprocessing industry. It indicates that while environmental safety devices have improved the working conditions, they have also added ever-increasing costs to this necessary process. (MA)

SBML-SAT: a systems biology markup language (SBML) based sensitivity analysis tool

PubMed Central

Zi, Zhike; Zheng, Yanan; Rundell, Ann E; Klipp, Edda

2008-01-01

Background It has long been recognized that sensitivity analysis plays a key role in modeling and analyzing cellular and biochemical processes. Systems biology markup language (SBML) has become a well-known platform for coding and sharing mathematical models of such processes. However, current SBML compatible software tools are limited in their ability to perform global sensitivity analyses of these models. Results This work introduces a freely downloadable, software package, SBML-SAT, which implements algorithms for simulation, steady state analysis, robustness analysis and local and global sensitivity analysis for SBML models. This software tool extends current capabilities through its execution of global sensitivity analyses using multi-parametric sensitivity analysis, partial rank correlation coefficient, SOBOL's method, and weighted average of local sensitivity analyses in addition to its ability to handle systems with discontinuous events and intuitive graphical user interface. Conclusion SBML-SAT provides the community of systems biologists a new tool for the analysis of their SBML models of biochemical and cellular processes. PMID:18706080

SBML-SAT: a systems biology markup language (SBML) based sensitivity analysis tool.

PubMed

Zi, Zhike; Zheng, Yanan; Rundell, Ann E; Klipp, Edda

2008-08-15

It has long been recognized that sensitivity analysis plays a key role in modeling and analyzing cellular and biochemical processes. Systems biology markup language (SBML) has become a well-known platform for coding and sharing mathematical models of such processes. However, current SBML compatible software tools are limited in their ability to perform global sensitivity analyses of these models. This work introduces a freely downloadable, software package, SBML-SAT, which implements algorithms for simulation, steady state analysis, robustness analysis and local and global sensitivity analysis for SBML models. This software tool extends current capabilities through its execution of global sensitivity analyses using multi-parametric sensitivity analysis, partial rank correlation coefficient, SOBOL's method, and weighted average of local sensitivity analyses in addition to its ability to handle systems with discontinuous events and intuitive graphical user interface. SBML-SAT provides the community of systems biologists a new tool for the analysis of their SBML models of biochemical and cellular processes.

Client perceptions of a work rehabilitation programme for women: the Redesigning Daily Occupations (ReDO) project.

PubMed

Wästberg, Birgitta A; Erlandsson, Lena-Karin; Eklund, Mona

2013-03-01

The Redesigning Daily Occupations programme (ReDO) is a Swedish work rehabilitation programme for women on sick leave due to stress-related disorders. The aim of the study was to investigate the participants' perceptions of taking part in the work rehabilitation programme. Seven of the 38 women who completed ReDO were interviewed during and after the programme. The interviews were analysed by manifest and latent content analysis. The informants were satisfied with the content of the programme and the support they received in the programme and when returning to work. The women thought they had become more aware of what they did during a day and how they performed their daily activities, which helped them to change their ways of performing them. The result highlighted different parts of their rehabilitation process which constituted four sub-themes: "Perceptions of the ReDO", "The intrinsic process", "Person-related changes", and "Perceptions of returning to work", and formed the core theme "Critical parts of the rehabilitation process". The findings may not be generalized to other settings and future research should further investigate work rehabilitation for the target group.

Sources of work motivation of business leaders in the USA and South Africa: a cross-cultural comparison using the Motivational Sources Inventory.

PubMed

Barbuto, John E; Gifford, Gregory T

2007-10-01

Motivational differences in response to the Motivation Sources Inventory were tested between U.S. (n = 138) and South-African (n = 114) work samples. Analysis indicated that American managers scored significantly higher on intrinsic process (fun), while South-African managers scored significantly higher on self-concept external and goal internalization when measured using ratio analysis. Replication and extension with large groups representative of populations of interest in conjunction with Hofstede's cultural dimensions could allow generalization.

Psychological effects of relational job characteristics: validation of the scale for hospital nurses.

PubMed

Santos, Alda; Castanheira, Filipa; Chambel, Maria José; Amarante, Michael Vieira; Costa, Carlos

2017-07-01

This study validates the Portuguese version of the psychological effects of the relational job characteristics scale among hospital nurses in Portugal and Brazil. Increasing attention has been given to the social dimension of work, following the transition to a service economy. Nevertheless, and despite the unquestionable relational characteristics of nursing work, scarce research has been developed among nurses under a relational job design framework. Moreover, it is important to develop instruments that study the effects of relational job characteristics among nurses. We followed Messick's framework for scale validation, comprising the steps regarding the response process and internal structure, as well as relationships with other variables (work engagement and burnout). Statistical analysis included exploratory factor analysis and confirmatory factor analysis. The psychological effects of the relational job characteristics scale provided evidence of good psychometric properties with Portuguese and Brazilian hospital nurses. Also, the psychological effects of the relational job characteristics are associated with nurses' work-related well-being: positively with work engagement and negatively concerning burnout. Hospitals that foster the relational characteristics of nursing work are contributing to their nurses' work-related well-being, which may be reflected in the quality of care and patient safety. © 2017 John Wiley & Sons Ltd.

Ergonomic analysis of work activity for the purpose of developing training programs: the contribution of ergonomics to vocational didactics.

PubMed

Ouellet, Sylvie

2012-01-01

Questions related to job skills and the teaching situations that best promote skill development are investigated by specialists in various fields, notably among them, ergonomists. This paper presents the findings of an ergonomic intervention study whose aim was to develop a meat-deboning training program by taking into account both the training content to be constructed and the working conditions that might facilitate or hinder skill development. One-on-one interviews and group discussions, on-the-job and videotape playback observations, as well as self-confrontation interviews were carried out. Activity analysis revealed major variability in work methods. The reasoning behind the experienced workers' actions and the experiential job knowledge they had developed were brought to light and served to develop the training content. The determining factors in the choice of work methods were identified, allowing adjustments to be made to the working conditions that might hinder skill development. The ergonomic process that implied taking working conditions into account in our study may make a significant contribution to vocational didactics, which is based on the cognitive analysis of work for the purpose of improving the effectiveness of job-skills training.

Disentangling working memory processes during spatial span assessment: a modeling analysis of preferred eye movement strategies.

PubMed

Patt, Virginie M; Thomas, Michael L; Minassian, Arpi; Geyer, Mark A; Brown, Gregory G; Perry, William

2014-01-01

The neurocognitive processes involved during classic spatial working memory (SWM) assessment were investigated by examining naturally preferred eye movement strategies. Cognitively healthy adult volunteers were tested in a computerized version of the Corsi Block-Tapping Task--a spatial span task requiring the short term maintenance of a series of locations presented in a specific order--coupled with eye tracking. Modeling analysis was developed to characterize eye-tracking patterns across all task phases, including encoding, retention, and recall. Results revealed a natural preference for local gaze maintenance during both encoding and retention, with fewer than 40% fixated targets. These findings contrasted with the stimulus retracing pattern expected during recall as a result of task demands, with 80% fixated targets. Along with participants' self-reported strategies of mentally "making shapes," these results suggest the involvement of covert attention shifts and higher order cognitive Gestalt processes during spatial span tasks, challenging instrument validity as a single measure of SWM storage capacity.

[The construction process of managerial profile competencies for nurse coordinators in the hospital field].

PubMed

Manenti, Simone Alexandra; Ciampone, Maria Helena Trench; Mira, Vera Lucia; Minami, Lígia Fumiko; Soares, Jaqueline Maria Sousa

2012-06-01

The objective of this study was to construct a profile of managerial competencies, based on the consensus of nurse coordinators in the field. This study was developed in a philanthropic hospital in São Paulo, following the research-action model, and included 13 nurse coordinators as participants. The data collection was performed using the focal group technique. Data analysis was performed using the theoretical frameworks related to the working process and managerial competencies. The results identified the greater emphasis assigned to the competencies related to the mentor, coordinator and director roles. It was, therefore, possible to construct a professional development plan that is based on competencies in the technical, ethical-political, and communicative domains, as well as the development of citizenship. The analysis of the managerial working process and the study of the competencies within the managerial environment were shown to be important, because they highlighted the professionals' need to improve, thus fulfilling personal, professional, and organizational demands.

Implementation of the Pan-STARRS Image Processing Pipeline

NASA Astrophysics Data System (ADS)

Fang, Julia; Aspin, C.

2007-12-01

Pan-STARRS, or Panoramic Survey Telescope and Rapid Response System, is a wide-field imaging facility that combines small mirrors with gigapixel cameras. It surveys the entire available sky several times a month, which ultimately requires large amounts of data to be processed and stored right away. Accordingly, the Image Processing Pipeline--the IPP--is a collection of software tools that is responsible for the primary image analysis for Pan-STARRS. It includes data registration, basic image analysis such as obtaining master images and detrending the exposures, mosaic calibration when applicable, and lastly, image sum and difference. In this paper I present my work of the installation of IPP 2.1 and 2.2 on a Linux machine, running the Simtest, which is simulated data to test your installation, and finally applying the IPP to two different sets of UH 2.2m Tek data. This work was conducted by a Research Experience for Undergraduates (REU) position at the University of Hawaii's Institute for Astronomy and funded by the NSF.

Memory as the "whole brain work": a large-scale model based on "oscillations in super-synergy".

PubMed

Başar, Erol

2005-01-01

According to recent trends, memory depends on several brain structures working in concert across many levels of neural organization; "memory is a constant work-in progress." The proposition of a brain theory based on super-synergy in neural populations is most pertinent for the understanding of this constant work in progress. This report introduces a new model on memory basing on the processes of EEG oscillations and Brain Dynamics. This model is shaped by the following conceptual and experimental steps: 1. The machineries of super-synergy in the whole brain are responsible for formation of sensory-cognitive percepts. 2. The expression "dynamic memory" is used for memory processes that evoke relevant changes in alpha, gamma, theta and delta activities. The concerted action of distributed multiple oscillatory processes provides a major key for understanding of distributed memory. It comprehends also the phyletic memory and reflexes. 3. The evolving memory, which incorporates reciprocal actions or reverberations in the APLR alliance and during working memory processes, is especially emphasized. 4. A new model related to "hierarchy of memories as a continuum" is introduced. 5. The notions of "longer activated memory" and "persistent memory" are proposed instead of long-term memory. 6. The new analysis to recognize faces emphasizes the importance of EEG oscillations in neurophysiology and Gestalt analysis. 7. The proposed basic framework called "Memory in the Whole Brain Work" emphasizes that memory and all brain functions are inseparable and are acting as a "whole" in the whole brain. 8. The role of genetic factors is fundamental in living system settings and oscillations and accordingly in memory, according to recent publications. 9. A link from the "whole brain" to "whole body," and incorporation of vegetative and neurological system, is proposed, EEG oscillations and ultraslow oscillations being a control parameter.

The role of hardware in learning engineering fundamentals: An empirical study of engineering design and product analysis activity

NASA Astrophysics Data System (ADS)

Brereton, Margot Felicity

A series of short engineering exercises and design projects was created to help students learn to apply abstract knowledge to physical experiences with hardware. The exercises involved designing machines from kits of materials and dissecting and analyzing familiar household products. Students worked in teams. During the activities students brought their knowledge of engineering fundamentals to bear. Videotape analysis was used to identify and characterize the ways in which hardware contributed to learning fundamental concepts. Structural and qualitative analyses of videotaped activities were undertaken. Structural analysis involved counting the references to theory and hardware and the extent of interleaving of references in activity. The analysis found that there was much more discussion linking fundamental concepts to hardware in some activities than in others. The analysis showed that the interleaving of references to theory and hardware in activity is observable and quantifiable. Qualitative analysis was used to investigate the dialog linking concepts and hardware. Students were found to advance their designs and their understanding of engineering fundamentals through a negotiation process in which they pitted abstract concepts against hardware behavior. Through this process students sorted out theoretical assumptions and causal relations. In addition they discovered design assumptions, functional connections and physical embodiments of abstract concepts in hardware, developing a repertoire of familiar hardware components and machines. Hardware was found to be integral to learning, affecting the course of inquiry and the dynamics of group interaction. Several case studies are presented to illustrate the processes at work. The research illustrates the importance of working across the boundary between abstractions and experiences with hardware in order to learn engineering and physical sciences. The research findings are: (a) the negotiation process by which students discover fundamental concepts in hardware (and three central causes of negotiation breakdown); (b) a characterization of the ways that material systems contribute to learning activities, (the seven roles of hardware in learning); (c) the characteristics of activities that support discovering fundamental concepts in hardware (plus several engineering exercises); (d) a research methodology to examine how students learn in practice.

OSIRIS-REx and mission sample science: The return of at least 60 g of pristine regolith from asteroid Bennu

NASA Astrophysics Data System (ADS)

Connolly, H. C., Jr.; Lauretta, D. S.

2014-07-01

Introduction: The Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) asteroid sample return mission was selected by NASA in May 2011 as the third New Frontiers mission. The target, (101955) Bennu, is a B-type near-Earth asteroid (NEA), hypothesized to be similar to CI or CM carbonaceous chondrites. The key science objectives of the mission are summarized in [1]. To meet these science objectives, the science team is coordinated and governed by the Science Executive Council (SEC): A group of six persons that run various elements of mission science. Mission Sample Science (MSS) is charged with analysis of the returned sample. Mission Sample Science: MSS is run by a Mission Scientist and composed of the following working groups: Carbonaceous Meteorite Working Group (CMWG), Dynamical Evolution Working Group (DEWG), Regolith Development Working Group (RDWG), Sample Analysis Working Group (SampleWG), Sample Site Science Working Group (SSSWG), and TAGSAM Working Group (TAGSAMWG). CMWG works to define and create well-characterized test samples, both natural and synthetic, for the development of spectral test data. These data are used to verify the depth and accuracy of spectral analysis techniques for processing data collected by the OSIRIS-REx spectrometers (OVIRS and OTES). The DEWG is charged with constraining the history of asteroid Bennu from main-belt asteroid to NEA. They also work closely with the SampleWG to define the hypotheses for the dynamical evolution of Bennu through the analysis of the returned sample. The RDWG is focused on developing constraints on the origin and evolution of regolith on Bennu through investigations of the surface geology and, working with the SampleWG, test these hypotheses through sample analysis. RDWG is also focused on the analysis of the sampling event and reconstructing what occurred during the event. SampleWG is focused on documenting Contamination Knowledge, which is distinct but related to mission Contamination Control. The main deliverable for this working group is the Sample Analysis Plan, due in 2019. Furthermore, it is this working group that is responsible for constituting the Preliminary Examination Team (PET) and performing the analyses of the returned sample during the first six months after return. SSSWG has the main deliverable of providing to the project the Science Value Maps (SVMs), which are part of the sample site selection process. If we can deliver the spacecraft to candidate sample sites, if it is safe to sample at them, and if there is material that can be ingested, SVMs will be a semi-quantitative aid in picking the optimum site to meet mission science goals. Finally, TAGSAM (Touch And Go Sample Acquisition Mechanism) is the sampler for the mission and this working group is concerned primarily with characterizing TAGSAM capabilities against a range of regolith types. Mission Sample Science provides an over-arching structure to reconstruct the pre- and post-accretion history of Bennu from the formation of pre-solar grains, chondrules, up to geological activity within the asteroid to its final dynamical evolution through analysis of the returned sample using a wide range of disciplines and expertise.

Application of Semantic Tagging to Generate Superimposed Information on a Digital Encyclopedia

NASA Astrophysics Data System (ADS)

Garrido, Piedad; Tramullas, Jesus; Martinez, Francisco J.

We can find in the literature several works regarding the automatic or semi-automatic processing of textual documents with historic information using free software technologies. However, more research work is needed to integrate the analysis of the context and provide coverage to the peculiarities of the Spanish language from a semantic point of view. This research work proposes a novel knowledge-based strategy based on combining subject-centric computing, a topic-oriented approach, and superimposed information. It subsequent combination with artificial intelligence techniques led to an automatic analysis after implementing a made-to-measure interpreted algorithm which, in turn, produced a good number of associations and events with 90% reliability.

[Role transition and working adaption in new nursing graduates: a qualitative study].

PubMed

Ho, Hsueh-Hua; Liu, Pei-Fen; Hu, Hsiao-Chen; Huang, Su-Fei; Chen, Hsiao-Lien

2010-12-01

The role transition process is full of stresses and challenges for nurses. Between 35-61% nurses leave their job within the first year. Past cross-sectional quantitative studies have not provided deep descriptions of either the dynamic role transition or work adaption processes of new nurses. The purpose of this study was to understand the role transition experience of new nurses as they transitioned into clinical practice during their first three months on the job. A qualitative approach was used. Data were collected through a semi-structured interview from 50 new nurses. Data were analyzed using category-content analysis. Three stages were identified in the new nurse work adaption process over the first three-month period. These included (1) Understanding: New nurse knowledge and skills are insufficient to handle routine work, adapting to the role transition is difficult, feelings of anxiety emerge related to fears of incompetence, communication difficulties must be faced in the handover process, new nurses adopt feelings of attachment to their preceptors, they must work to adopt appropriate attitudes and approaches to nursing practice, and support is sought from family, teachers and friends; (2) Acclimation: Learning to care for patients independently, seeking role models, learning to adapt to night shifts, trying to identify with co-workers, and seeking support from colleagues, preceptors and head nurses; (3) Acceptance: Managing nursing work better in terms of time and organization, feeling gradual acceptance from co-workers, restoring personal enthusiasm for work, starting to consider other, non-work related matters, experiencing and appreciating the support of co-workers and head nurses. CONCLUSIONS/IMPLICATION: New nurses face a critical role transition process through their first three months on the job. Guidance and leadership from experienced nurses and multiple support systems can assist new nurses to acclimate to their role. Research results provide information for educators and administrators to better understand the adaption process of new nurses, and offer a reference for developing future strategies to improve nurse competency in handling their work.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howse, Dana; Gautrin, Denyse; Neis, Barbara

Fish and shellfish processing employs many thousands of people globally, with shellfish processing becoming more important in recent years. Shellfish processing is associated with multiple occupational health and safety (OHS) risks. Snow crab occupational asthma (OA) is work-related asthma associated with processing snow crab. We present a gender analysis of findings from a 3-year multifaceted study of snow crab OA in Newfoundland and Labrador, Canada. The study was carried out in four snow crab processing communities between 2001 and 2004. An anonymous survey questionnaire on knowledge, beliefs, and concerns related to processing snow crab administered to 158 workers attending communitymore » meetings at the start of the research found that women were significantly more likely than men to associate certain health problems, especially chest tightness, difficulty breathing, and cough, with crab processing (P<0.001). Worker health assessments carried out with 215 processing workers (187 current/28 former; 120 female/95 male) found that female participants were more likely to be diagnosed as almost certain/highly probable snow crab OA and allergy (P=0.001) and to be sensitized to snow crab (P=0.01) than male participants. Work histories from the health assessments were used to classify processing jobs as male or female. Allergen sampling (211 allergen samples: 115 area, 96 personal breathing zone) indicated that the plant areas where these male jobs were concentrated were associated with lower levels of aerosolized crab allergens (the agents responsible for OA to snow crab) than areas associated with female jobs. This difference was statistically significant in the two plants with poor ventilation (p<0.001 and P=0.017 for these plants). A gender analysis of work history data showed that female health assessment participants were likely to have worked longer processing snow crab than males (5 years versus 3.5 years, respectively). Cross-referencing of work history results with allergen sampling data for male and female job areas showed a gender difference in median cumulative exposures (duration of exposurexlevel of exposures) for health assessment participants. Health assessment participants with estimated higher median cumulative exposures were more likely to receive a diagnosis of almost certain/highly probable OA and allergy. Semistructured interviews with 27 health assessment participants (24 female/ 3 male) with a diagnosis of almost certain/highly probable or possible snow crab OA indicated that these workers can experience substantial quality of life impacts while working and that they seek to reduce the economic impact of their illness by remaining at their jobs as long as possible. Indications of selection bias and other study limitations point to the need for more research exploring the relationship between the gender division of labor and knowledge, beliefs, and concerns about snow crab processing, as well as gender differences in prevalence, quality of life, and socioeconomic impact.« less

Behavioral and Neural Correlates of Executive Function: Interplay between Inhibition and Updating Processes.

PubMed

Kim, Na Young; Wittenberg, Ellen; Nam, Chang S

2017-01-01

This study investigated the interaction between two executive function processes, inhibition and updating, through analyses of behavioral, neurophysiological, and effective connectivity metrics. Although, many studies have focused on behavioral effects of executive function processes individually, few studies have examined the dynamic causal interactions between these two functions. A total of twenty participants from a local university performed a dual task combing flanker and n-back experimental paradigms, and completed the Operation Span Task designed to measure working memory capacity. We found that both behavioral (accuracy and reaction time) and neurophysiological (P300 amplitude and alpha band power) metrics on the inhibition task (i.e., flanker task) were influenced by the updating load (n-back level) and modulated by working memory capacity. Using independent component analysis, source localization (DIPFIT), and Granger Causality analysis of the EEG time-series data, the present study demonstrated that manipulation of cognitive demand in a dual executive function task influenced the causal neural network. We compared connectivity across three updating loads (n-back levels) and found that experimental manipulation of working memory load enhanced causal connectivity of a large-scale neurocognitive network. This network contains the prefrontal and parietal cortices, which are associated with inhibition and updating executive function processes. This study has potential applications in human performance modeling and assessment of mental workload, such as the design of training materials and interfaces for those performing complex multitasking under stress.

From risky to safer home care: health care assistants striving to overcome a lack of training, supervision, and support.

PubMed

Swedberg, Lena; Chiriac, Eva Hammar; Törnkvist, Lena; Hylander, Ingrid

2013-05-23

Patients receiving home care are becoming increasingly dependent upon competent caregivers' 24-h availability due to their substantial care needs, often with advanced care and home care technology included. In Sweden, care is often carried out by municipality-employed paraprofessionals such as health care assistants (HC assistants) with limited or no health care training, performing advanced care without formal training or support. The aim of this study was to investigate the work experience of the HC assistants and to explore how they manage when delivering 24-h home care to patients with substantial care needs. Grounded theory methodology involving multiple data sources comprising interviews with HC assistants (n=19) and field observations in patients' homes was used to collect data and constant comparative analysis was used for analysis. The initial analysis revealed a number of barriers, competence gap; trapped in the home setting; poor supervision and unconnected to the patient care system, describing the risks associated with the situations of HC assistants working in home care, thus affecting their working conditions as well as the patient care. The core process identified was the HC assistants' strivings to combine safe home care with good working conditions by using compensatory processes. The four identified compensatory processes were: day-by-day learning; balancing relations with the patient; self-managing; and navigating the patient care system. By actively employing the compensatory processes, the HC assistants could be said to adopt an inclusive approach, by compensating for their own barriers as well as those of their colleagues' and taking overall responsibility for their workplace. In conclusion, the importance of supporting HC assistants in relation to their needs for training, supervision,and support from health care professionals must be addressed when organising 24-h home care to patients with substantial care needs in the future.

Role stressors and coping strategies among nurse managers.

PubMed

Udod, Sonia; Cummings, Greta G; Care, W Dean; Jenkins, Megan

2017-02-06

Purpose The purpose of this paper is to share preliminary evidence about nurse managers' (NMs) role stressors and coping strategies in acute health-care facilities in Western Canada. Design/methodology/approach A qualitative exploratory inquiry provides deeper insight into NMs' perceptions of their role stressors, coping strategies and factors and practices in the organizational context that facilitate and hinder their work. A purposeful sample of 17 NMs participated in this study. Data were collected through individual interviews and a focus group interview. Braun and Clarke's (2006) six phase approach to thematic analysis guided data analysis. Findings Evidence demonstrates that individual factors, organizational practices and structures affect NMs stress creating an evolving role with unrealistic expectations, responding to continuous organizational change, a fragmented ability to effectively process decisions because of work overload, shifting organizational priorities and being at risk for stress-related ill health. Practical implications These findings have implications for organizational support, intervention programs that enhance leadership approaches, address individual factors and work processes and redesigning the role in consideration of the role stress and work complexity affecting NMs health. Originality/value It is anticipated that health-care leaders would find these results concerning and inspire them to take action to support NMs to do meaningful work as a way to retain existing managers and attract front line nurses to positions of leadership.

On the Analysis of Two-Person Problem Solving Protocols.

ERIC Educational Resources Information Center

Schoenfeld, Alan H.

Methodological issues in the use of protocol analysis for research into human problem solving processes are examined through a case study in which two students were videotaped as they worked together to solve mathematical problems "out loud." The students' chosen strategic or executive behavior in examining and solving a problem was…

Error Analysis in Mathematics. Technical Report #1012

ERIC Educational Resources Information Center

Lai, Cheng-Fei

2012-01-01

Error analysis is a method commonly used to identify the cause of student errors when they make consistent mistakes. It is a process of reviewing a student's work and then looking for patterns of misunderstanding. Errors in mathematics can be factual, procedural, or conceptual, and may occur for a number of reasons. Reasons why students make…

Naturalizing the Future in Factual Discourse: A Critical Linguistic Analysis of a Projected Event.

ERIC Educational Resources Information Center

Dunmire, Patricia L.

1997-01-01

Examines the linguistic processes through which a projected effect is constructed within factual discourse. Applies critical linguistic analysis to coverage of the 1990 Gulf War in the "New York Times" and "Washington Post." Expands on work in critical linguistics and demonstrates how political interests underlying newspaper…

An Examination of Canadian Information Professionals' Involvement in the Provision of Business Information Synthesis and Analysis Services

ERIC Educational Resources Information Center

Patterson, Liane; Martzoukou, Konstantina

2012-01-01

The present study investigated the processes information professionals, working in a business environment, follow to meet business clients' information needs and particularly their involvement in information synthesis and analysis practices. A combination of qualitative and quantitative data was collected via a survey of 98 information…

Teaching With a Purpose: The Perry Scheme and the Teaching of Writing.

ERIC Educational Resources Information Center

Burnham, Christopher C.

While close analysis of individual composing processes has been the major accomplishment of recent writing research, this research has not yet sufficiently considered how students develop as learners. The work of William Perry, a developmental psychologist, can contribute to an understanding of that development. Based on an analysis of interviews…

Republication of "Functional Analysis of Classroom Variables for Students with Emotional and Behavioral Disorders"

ERIC Educational Resources Information Center

Dunlap, Glen; Kern, Lee; dePerczel, Maria; Clarke, Shelley; Wilson, Diane; Childs, Karen E.; White, Ronnie; Falk, George D.

2018-01-01

Functional assessment and functional analysis are processes that have been applied successfully in work with people who have developmental disabilities, but they have been used rarely with students who experience emotional or behavioral disorders. In the present study, five students in elementary school programs for severe emotional disturbance…

Fatigue Life Variability in Large Aluminum Forgings with Residual Stress

DTIC Science & Technology

2011-07-01

been conducted. A detailed finite element analysis of the forge/ quench /coldwork/machine process was performed in order to predict the bulk residual...forge/ quench /coldwork/machine process was performed in order to predict the bulk residual stresses in a fictitious aluminum bulkhead. The residual...continues to develop the capability for computational simulation of the forge, quench , cold work and machining processes. In order to handle the

Examining the Learning Outcomes Included in the Turkish Science Curriculum in Terms of Science Process Skills: A Document Analysis with Standards-Based Assessment

ERIC Educational Resources Information Center

Duruk, Umit; Akgün, Abuzer; Dogan, Ceylan; Gülsuyu, Fatma

2017-01-01

Science process skills have provided a valuable chance for everyone to construct their own knowledge by means of scientific inquiry. If students are to understand what science is and how it actually works, then they should necessarily make use of their science process skills as well as scientific content knowledge compulsory to be learned in any…

Evolutionary design optimization of traffic signals applied to Quito city.

PubMed

Armas, Rolando; Aguirre, Hernán; Daolio, Fabio; Tanaka, Kiyoshi

2017-01-01

This work applies evolutionary computation and machine learning methods to study the transportation system of Quito from a design optimization perspective. It couples an evolutionary algorithm with a microscopic transport simulator and uses the outcome of the optimization process to deepen our understanding of the problem and gain knowledge about the system. The work focuses on the optimization of a large number of traffic lights deployed on a wide area of the city and studies their impact on travel time, emissions and fuel consumption. An evolutionary algorithm with specialized mutation operators is proposed to search effectively in large decision spaces, evolving small populations for a short number of generations. The effects of the operators combined with a varying mutation schedule are studied, and an analysis of the parameters of the algorithm is also included. In addition, hierarchical clustering is performed on the best solutions found in several runs of the algorithm. An analysis of signal clusters and their geolocation, estimation of fuel consumption, spatial analysis of emissions, and an analysis of signal coordination provide an overall picture of the systemic effects of the optimization process.

Evolutionary design optimization of traffic signals applied to Quito city

PubMed Central

2017-01-01

This work applies evolutionary computation and machine learning methods to study the transportation system of Quito from a design optimization perspective. It couples an evolutionary algorithm with a microscopic transport simulator and uses the outcome of the optimization process to deepen our understanding of the problem and gain knowledge about the system. The work focuses on the optimization of a large number of traffic lights deployed on a wide area of the city and studies their impact on travel time, emissions and fuel consumption. An evolutionary algorithm with specialized mutation operators is proposed to search effectively in large decision spaces, evolving small populations for a short number of generations. The effects of the operators combined with a varying mutation schedule are studied, and an analysis of the parameters of the algorithm is also included. In addition, hierarchical clustering is performed on the best solutions found in several runs of the algorithm. An analysis of signal clusters and their geolocation, estimation of fuel consumption, spatial analysis of emissions, and an analysis of signal coordination provide an overall picture of the systemic effects of the optimization process. PMID:29236733

After-shift Musculoskeletal Disorder Symptoms in Female Workers and Work-related Factors: A Cross-sectional Study in a Seafood Processing Factory in Vietnam.

PubMed

Tran, Thuy Thi Thu; Phan, Chinh Thi Thuy; Pham, Tuan Cong; Nguyen, Quynh Thuy

2016-01-01

The seafood processing industry has been developing and providing marked contribution to Vietnam's economic growth in recent years. However, information on working conditions and their impacts to workers' health in this sector, focusing on musculoskeletal problems in female workers, has been poorly documented. This paper examines the prevalence of after-shift musculoskeletal disorder symptoms (A-MSDS) and work-related factors in female workers in a seafood processing factory in Vietnam. As part of a comprehensive study, a cross-sectional survey was implemented in one seafood processing factory in the center of Vietnam in 2014. A self-administered questionnaire was completed by 394 female workers to collect information about their A-MSDS state, demographic characteristics, health status and work conditions. Descriptive analysis and logistic regression were applied to describe and analyse the results. Nearly four-fifths of female workers experienced MSDs in at least one body part (77.7%) and 20.1% of them had MSDs in all investigated regions. The prevalence of A-MSDS in different body parts markedly varied, with the proportion of pain in the hips and lower extremities being as high as 53.3%, followed by pain in the shoulders and upper extremities (42.6%) and the neck (41.1%). A humid working environment, exposure to vibration and chemicals as well as taxing task demands and work organizations were found to significantly contribute to the increased risk of after-shift musculoskeletal disorders in female workers. Approximately 80% of female workers in the seafood processing factory experienced musculoskeletal pains after work, especially in the hips, extremities, neck and shoulders which were contributed by work conditions and task demands.

After-shift Musculoskeletal Disorder Symptoms in Female Workers and Work-related Factors: A Cross-sectional Study in a Seafood Processing Factory in Vietnam

PubMed Central

Tran, Thuy Thi Thu; Phan, Chinh Thi Thuy; Pham, Tuan Cong; Nguyen, Quynh Thuy

2016-01-01

Background The seafood processing industry has been developing and providing marked contribution to Vietnam's economic growth in recent years. However, information on working conditions and their impacts to workers' health in this sector, focusing on musculoskeletal problems in female workers, has been poorly documented. Objectives This paper examines the prevalence of after-shift musculoskeletal disorder symptoms (A-MSDS) and work-related factors in female workers in a seafood processing factory in Vietnam. Materials and Methods As part of a comprehensive study, a cross-sectional survey was implemented in one seafood processing factory in the center of Vietnam in 2014. A self-administered questionnaire was completed by 394 female workers to collect information about their A-MSDS state, demographic characteristics, health status and work conditions. Descriptive analysis and logistic regression were applied to describe and analyse the results. Results Nearly four-fifths of female workers experienced MSDs in at least one body part (77.7%) and 20.1% of them had MSDs in all investigated regions. The prevalence of A-MSDS in different body parts markedly varied, with the proportion of pain in the hips and lower extremities being as high as 53.3%, followed by pain in the shoulders and upper extremities (42.6%) and the neck (41.1%). A humid working environment, exposure to vibration and chemicals as well as taxing task demands and work organizations were found to significantly contribute to the increased risk of after-shift musculoskeletal disorders in female workers. Conclusion Approximately 80% of female workers in the seafood processing factory experienced musculoskeletal pains after work, especially in the hips, extremities, neck and shoulders which were contributed by work conditions and task demands. PMID:29546192

Effect of Burnishing Parameters on Surface Finish

NASA Astrophysics Data System (ADS)

Shirsat, Uddhav; Ahuja, Basant; Dhuttargaon, Mukund

2017-08-01

Burnishing is cold working process in which hard balls are pressed against the surface, resulting in improved surface finish. The surface gets compressed and then plasticized. This is a highly finishing process which is becoming more popular. Surface quality of the product improves its aesthetic appearance. The product made up of aluminum material is subjected to burnishing process during which kerosene is used as a lubricant. In this study factors affecting burnishing process such as burnishing force, speed, feed, work piece diameter and ball diameter are considered as input parameters while surface finish is considered as an output parameter In this study, experiments are designed using 25 factorial design in order to analyze the relationship between input and output parameters. The ANOVA technique and F-test are used for further analysis.

Online analysis and process control in recombinant protein production (review).

PubMed

Palmer, Shane M; Kunji, Edmund R S

2012-01-01

Online analysis and control is essential for efficient and reproducible bioprocesses. A key factor in real-time control is the ability to measure critical variables rapidly. Online in situ measurements are the preferred option and minimize the potential loss of sterility. The challenge is to provide sensors with a good lifespan that withstand harsh bioprocess conditions, remain stable for the duration of a process without the need for recalibration, and offer a suitable working range. In recent decades, many new techniques that promise to extend the possibilities of analysis and control, not only by providing new parameters for analysis, but also through the improvement of accepted, well practiced, measurements have arisen.

Neuroanatomical and Cognitive Mediators of Age-Related Differences in Episodic Memory

PubMed Central

Head, Denise; Rodrigue, Karen M.; Kennedy, Kristen M.; Raz, Naftali

2009-01-01

Aging is associated with declines in episodic memory. In this study, the authors used a path analysis framework to explore the mediating role of differences in brain structure, executive functions, and processing speed in age-related differences in episodic memory. Measures of regional brain volume (prefrontal gray and white matter, caudate, hippocampus, visual cortex), executive functions (working memory, inhibitory control, task switching, temporal processing), processing speed, and episodic memory were obtained in a sample of young and older adults. As expected, age was linked to reduction in regional brain volumes and cognitive performance. Moreover, neural and cognitive factors completely mediated age differences in episodic memory. Whereas hippocampal shrinkage directly affected episodic memory, prefrontal volumetric reductions influenced episodic memory via limitations in working memory and inhibitory control. Age-related slowing predicted reduced efficiency in temporal processing, working memory, and inhibitory control. Lastly, poorer temporal processing directly affected episodic memory. No direct effects of age on episodic memory remained once these factors were taken into account. These analyses highlight the value of a multivariate approach with the understanding of complex relationships in cognitive and brain aging. PMID:18590361

Exploring the complementarity of THz pulse imaging and DCE-MRIs: Toward a unified multi-channel classification and a deep learning framework.

PubMed

Yin, X-X; Zhang, Y; Cao, J; Wu, J-L; Hadjiloucas, S

2016-12-01

We provide a comprehensive account of recent advances in biomedical image analysis and classification from two complementary imaging modalities: terahertz (THz) pulse imaging and dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI). The work aims to highlight underlining commonalities in both data structures so that a common multi-channel data fusion framework can be developed. Signal pre-processing in both datasets is discussed briefly taking into consideration advances in multi-resolution analysis and model based fractional order calculus system identification. Developments in statistical signal processing using principal component and independent component analysis are also considered. These algorithms have been developed independently by the THz-pulse imaging and DCE-MRI communities, and there is scope to place them in a common multi-channel framework to provide better software standardization at the pre-processing de-noising stage. A comprehensive discussion of feature selection strategies is also provided and the importance of preserving textural information is highlighted. Feature extraction and classification methods taking into consideration recent advances in support vector machine (SVM) and extreme learning machine (ELM) classifiers and their complex extensions are presented. An outlook on Clifford algebra classifiers and deep learning techniques suitable to both types of datasets is also provided. The work points toward the direction of developing a new unified multi-channel signal processing framework for biomedical image analysis that will explore synergies from both sensing modalities for inferring disease proliferation. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Is the frontal dysexecutive syndrome due to a working memory deficit? Evidence from patients with stroke.

PubMed

Roussel, Martine; Dujardin, Kathy; Hénon, Hilde; Godefroy, Olivier

2012-07-01

Although frontal dysexecutive disorders are frequently considered to be due to working memory deficit, this has not been systematically examined and very little evidence is available for impairment of working memory in frontal damage. The objective of this study was to examine the components of working memory, their anatomy and the relations with executive functions in patients with stroke involving the frontal or posterior cortex. The study population consisted of 29 patients (frontal: n=17; posterior: n=12) and 29 matched controls. Phonological loop (letter and word spans, phonological store; rehearsal process), visuospatial sketchpad (visuospatial span) and the central executive (working memory span, dual task and updating process) were examined. The group comparison analysis showed impairment in the frontal group of: (i) verbal spans (P<0.03); (ii) with a deficit of the rehearsal process (P=0.006); (iii) visuospatial span (P=0.04); (iv) working memory span (P=0.001) that disappeared after controlling for verbal span and (v) running memory (P=0.05) unrelated to updating conditions. The clinical anatomical correlation study showed that impairment of the central executive depended on frontal and posterior lesion. Cognitive dysexecutive disorders were observed in 11/20 patients with central executive deficit and an inverse dissociation was observed in two patients. Receiver operating characteristic curve analysis indicated that cognitive dysexecutive disorders had the highest ability to discriminate frontal lesions (area under curve=0.844, 95% confidence interval: 0.74-0.95; P=0.0001; central executive impairment: area under curve=0.732, 95% confidence interval: 0.57-0.82; P=0.006). This study reveals that frontal lesions induce mild impairment of short-term memory associated with a deficit of the rehearsal process supporting the role of the frontal lobe in this process; the central executive depends on lesions in the frontal lobe and posterior regions accounting for its low frequency and the negative results of group studies. Finally, the frontal dysexecutive syndrome cannot be attributed to central executive impairment, although it may contribute to some dysexecutive disorders.

Beyond the classical theory of heat conduction: a perspective view of future from entropy

PubMed Central

Lai, Xiang; Zhu, Pingan

2016-01-01

Energy is conserved by the first law of thermodynamics; its quality degrades constantly due to entropy generation, by the second law of thermodynamics. It is thus important to examine the entropy generation regarding the way to reduce its magnitude and the limit of entropy generation as time tends to infinity regarding whether it is bounded or not. This work initiates such an analysis with one-dimensional heat conduction. The work not only offers some fundamental insights of universe and its future, but also builds up the relation between the second law of thermodynamics and mathematical inequalities via developing the latter of either new or classical nature. A concise review of entropy is also included for the interest of performing the analysis in this work and the similar analysis for other processes in the future. PMID:27843400

General specifications for the development of a USL NASA PC R and D statistical analysis support package

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Bassari, Jinous; Triantafyllopoulos, Spiros

1984-01-01

The University of Southwestern Louisiana (USL) NASA PC R and D statistical analysis support package is designed to be a three-level package to allow statistical analysis for a variety of applications within the USL Data Base Management System (DBMS) contract work. The design addresses usage of the statistical facilities as a library package, as an interactive statistical analysis system, and as a batch processing package.

M4SF-17LL010301071: Thermodynamic Database Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zavarin, M.; Wolery, T. J.

2017-09-05

This progress report (Level 4 Milestone Number M4SF-17LL010301071) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Argillite Disposal R&D Work Package Number M4SF-17LL01030107. The DR Argillite Disposal R&D control account is focused on the evaluation of important processes in the analysis of disposal design concepts and related materials for nuclear fuel disposal in clay-bearing repository media. The objectives of this work package are to develop model tools for evaluating impacts of THMC process on long-term disposal of spent fuel in argillite rocks, and to establish the scientific basis for high thermal limits. This work is contributing tomore » the GDSA model activities to identify gaps, develop process models, provide parameter feeds and support requirements providing the capability for a robust repository performance assessment model by 2020.« less

Work organization and ergonomics.

PubMed

Carayon, P; Smith, M J

2000-12-01

This paper examines the impact of sociotechnical and business trends on work organization and ergonomics. This analysis is performed with the use of Balance Theory (Smith and Carayon-Sainfort, Int. J. Ind. Ergon. 1989, 4, 67-79). The impact on work organization and the work system of the following sociotechnical and business trends is discussed: re-structuring and re-organizing of companies, new forms of work organization, workforce diversity, and information and communication technology. An expansion of Balance Theory, from the design of work systems to the design of organizations, is discussed. Finally, the issue of change is examined. Several elements and methods are discussed for the design of change processes.

The standpoint of persons with hearing loss on work disparities and workplace accommodations.

PubMed

Shaw, Lynn; Tetlaff, Britta; Jennings, Mary Beth; Southall, Kenneth E

2013-01-01

The perspectives of persons who live and work with hearing loss were sought to examine workplace accommodation challenges and strategies. A convenience sample of seven older adults with hearing loss participated in in-depth interviews. A systematic grounded theory approach informed the study design and analysis. Categories of facilitators and challenges in the data were identified through axial coding and clustering. Core categories of social processes emerged through constant comparison and theoretical sampling of the data to reveal the actions and interactions used to negotiate or implement adaptations or workplace accommodations. Persons with hearing loss use a realm of strategies to live and work with a hearing loss. Social processes used to navigate the challenges to working with hearing loss and to manage optimal work performance included: self-accommodation, self-advocacy, self-management of hearing loss, and lobbying. Success in overcoming work disparities for persons with hearing loss requires individuals to take control of identifying their needs within the workplace and at home, and to negotiate for specific accommodations. These strategies and processes draw attention to the need for a repository on contextualized workplace accommodation strategies for improving communication and hearing in the workplace. Further to this a best practice guide for use by workers, employers, and work rehabilitation and health care workers is indicated.

Process mining techniques: an application to time management

NASA Astrophysics Data System (ADS)

Khowaja, Ali Raza

2018-04-01

In an environment people have to make sure that all of their work are completed within a given time in accordance with its quality. In order to achieve the real phenomenon of process mining one needs to understand all of these processes in a detailed manner. Personal Information and communication has always been a highlighting issue on internet but for now information and communication tools within factual life refers to their daily schedule, location analysis, environmental analysis and, more generally, social media applications support these systems which makes data available for data analysis generated through event logs, but also for process analysis which combines environmental and location analysis. Process mining can be used to exploit all these real live processes with the help of the event logs which are already available in those datasets through user censored data or may be user labeled data. These processes could be used to redesign a user's flow and understand all these processes in a bit more detailed manner. In order to increase the quality of each of the processes that we go through our daily lives is to give a closer look to each of the processes and after analyzing them, one should make changes to get better results. On the contrarily, we applied process mining techniques on seven different subjects combined in a single dataset collected from Korea. Above all, the following paper comments on the efficiency of processes in the event logs referring to time management's sphere of influence.

Data preprocessing methods of FT-NIR spectral data for the classification cooking oil

NASA Astrophysics Data System (ADS)

Ruah, Mas Ezatul Nadia Mohd; Rasaruddin, Nor Fazila; Fong, Sim Siong; Jaafar, Mohd Zuli

2014-12-01

This recent work describes the data pre-processing method of FT-NIR spectroscopy datasets of cooking oil and its quality parameters with chemometrics method. Pre-processing of near-infrared (NIR) spectral data has become an integral part of chemometrics modelling. Hence, this work is dedicated to investigate the utility and effectiveness of pre-processing algorithms namely row scaling, column scaling and single scaling process with Standard Normal Variate (SNV). The combinations of these scaling methods have impact on exploratory analysis and classification via Principle Component Analysis plot (PCA). The samples were divided into palm oil and non-palm cooking oil. The classification model was build using FT-NIR cooking oil spectra datasets in absorbance mode at the range of 4000cm-1-14000cm-1. Savitzky Golay derivative was applied before developing the classification model. Then, the data was separated into two sets which were training set and test set by using Duplex method. The number of each class was kept equal to 2/3 of the class that has the minimum number of sample. Then, the sample was employed t-statistic as variable selection method in order to select which variable is significant towards the classification models. The evaluation of data pre-processing were looking at value of modified silhouette width (mSW), PCA and also Percentage Correctly Classified (%CC). The results show that different data processing strategies resulting to substantial amount of model performances quality. The effects of several data pre-processing i.e. row scaling, column standardisation and single scaling process with Standard Normal Variate indicated by mSW and %CC. At two PCs model, all five classifier gave high %CC except Quadratic Distance Analysis.

Iterative categorization (IC): a systematic technique for analysing qualitative data.

PubMed

Neale, Joanne

2016-06-01

The processes of analysing qualitative data, particularly the stage between coding and publication, are often vague and/or poorly explained within addiction science and research more broadly. A simple but rigorous and transparent technique for analysing qualitative textual data, developed within the field of addiction, is described. The technique, iterative categorization (IC), is suitable for use with inductive and deductive codes and can support a range of common analytical approaches, e.g. thematic analysis, Framework, constant comparison, analytical induction, content analysis, conversational analysis, discourse analysis, interpretative phenomenological analysis and narrative analysis. Once the data have been coded, the only software required is a standard word processing package. Worked examples are provided. © 2016 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.

[The construction of the "sick-subject" in RSI].

PubMed

Verthein, M A; Minayo-Gomez, C

2000-01-01

There is a running debate over the relationship between work and disease, namely the disease known as repetitive strain injury (RSI), or else work-related osteomuscular disturbances (in Portuguese DORT), as it was renamed in 1997 by the Instituto Nacional de Seguridade Social (INSS) in accordance with the Disability Assessment Norms. Standing out among the signs brought about by this new infirmity process is its restricted focus on the subjective aspects in the analysis of the disease. Underlying the INSS stance is the view of a sickness-prone subject and the notion of health as capacity for work. This paper analyzes the historical context which characterizes these health/work and body/disease notions. It also discusses the construction of the 'sick-subject' and the way in which such a subjectivizing process entraps the subject itself. Finally, we show the way in which the INSS in Rio de Janeiro has managed to stop this disease of its work-related characteristics, fighting and reducing the occurrences of RSI as well as the costs with work compensation claims.

The Role of Individual and Collective Mindfulness in Promoting Occupational Safety in Health Care.

PubMed

Dierynck, Bart; Leroy, Hannes; Savage, Grant T; Choi, Ellen

2017-02-01

Although the importance of safety regulations is highly emphasized in hospitals, nurses frequently work around, or intentionally bypass, safety regulations. We argue that work-arounds occur because adhering to safety regulations usually requires more time and work process design often lacks complementarity with safety regulations. Our main proposition is that mindfulness is associated with a decrease in occupational safety failures through a decrease in work-arounds. First, we propose that individual mindfulness may prevent the depletion of motivational resources caused by worrying about the consequences of time lost when adhering to safety regulations. Second, we argue that collective mindfulness may provide nursing teams with a cognitive infrastructure that facilitates the detection and adaptation of work processes. The results of a multilevel analysis of 580 survey responses from nurses are consistent with our propositions. Our multilevel analytic approach enables us to account for the unique variance in work-arounds that individual and collective mindfulness explain.

Developmental Trends for Object and Spatial Working Memory: A Psychophysiological Analysis

ERIC Educational Resources Information Center

Van Leijenhorst, Linda; Crone, Eveline A.; Van der Molen, Maurits W.

2007-01-01

This study examined developmental trends in object and spatial working memory (WM) using heart rate (HR) to provide an index of covert cognitive processes. Participants in 4 age groups (6-7, 9-10, 11-12, 18-26, n=20 each) performed object and spatial WM tasks, in which each trial was followed by feedback. Spatial WM task performance reached adult…

The Organization of Teaching Process for the Development of Key Competencies (Case Study: Future Managers)

ERIC Educational Resources Information Center

Khusainova, Guzel R.; Galeeva, Farida T.; Giniyatullina, Diana R.; Tarasova, Natalya M.; Tsareva, Ekaterina E.

2016-01-01

This article is focused on the development of the organizational forms of future managers training for the development of their key competencies, namely, creativity and the ability to work in a team. The analysis of works of the researchers in the field of management and pedagogics shows that small groups as an organizational form has great…

Proposal of Constraints Analysis Method Based on Network Model for Task Planning

NASA Astrophysics Data System (ADS)

Tomiyama, Tomoe; Sato, Tatsuhiro; Morita, Toyohisa; Sasaki, Toshiro

Deregulation has been accelerating several activities toward reengineering business processes, such as railway through service and modal shift in logistics. Making those activities successful, business entities have to regulate new business rules or know-how (we call them ‘constraints’). According to the new constraints, they need to manage business resources such as instruments, materials, workers and so on. In this paper, we propose a constraint analysis method to define constraints for task planning of the new business processes. To visualize each constraint's influence on planning, we propose a network model which represents allocation relations between tasks and resources. The network can also represent task ordering relations and resource grouping relations. The proposed method formalizes the way of defining constraints manually as repeatedly checking the network structure and finding conflicts between constraints. Being applied to crew scheduling problems shows that the method can adequately represent and define constraints of some task planning problems with the following fundamental features, (1) specifying work pattern to some resources, (2) restricting the number of resources for some works, (3) requiring multiple resources for some works, (4) prior allocation of some resources to some works and (5) considering the workload balance between resources.

Nurse manager cognitive decision-making amidst stress and work complexity.

PubMed

Shirey, Maria R; Ebright, Patricia R; McDaniel, Anna M

2013-01-01

  The present study provides insight into nurse manager cognitive decision-making amidst stress and work complexity.   Little is known about nurse manager decision-making amidst stress and work complexity. Because nurse manager decisions have the potential to impact patient care quality and safety, understanding their decision-making processes is useful for designing supportive interventions.   This qualitative descriptive study interviewed 21 nurse managers from three hospitals to answer the research question: What decision-making processes do nurse managers utilize to address stressful situations in their nurse manager role? Face-to-face interviews incorporating components of the Critical Decision Method illuminated expert-novice practice differences. Content analysis identified one major theme and three sub-themes.   The present study produced a cognitive model that guides nurse manager decision-making related to stressful situations. Experience in the role, organizational context and situation factors influenced nurse manager cognitive decision-making processes.   Study findings suggest that chronic exposure to stress and work complexity negatively affects nurse manager health and their decision-making processes potentially threatening individual, patient and organizational outcomes.   Cognitive decision-making varies based on nurse manager experience and these differences have coaching and mentoring implications. This present study contributes a current understanding of nurse manager decision-making amidst stress and work complexity. © 2012 Blackwell Publishing Ltd.

"The Record is Our Work Tool!"-Physicians' Framing of a Patient Portal in Sweden.

PubMed

Grünloh, Christiane; Cajander, Åsa; Myreteg, Gunilla

2016-06-27

Uppsala County in Sweden launched an eHealth patient portal in 2012, which allows patients to access their medical records over the Internet. However, the launch of the portal was critically debated in the media. The professionals were strongly skeptical, and one reason was possible negative effects on their work environment. This study hence investigates the assumptions and perspectives of physicians to understand their framing of the patient portal in relation to their work environment. The study uses the concept of technological frames to examine how physicians in different specialties make sense of the patient portal in relation to their work environment. A total of 12 semistructured interviews were conducted with physicians from different specialties. Interviews were transcribed and translated. A theoretically informed thematic analysis was performed. The thematic analysis revealed 4 main themes: work tool, process, workload, and control. Physicians perceive medical records as their work tool, written for communication within health care only. Considering effects on work environment, the physicians held a negative attitude and expected changes, which would affect their work processes in a negative way. Especially the fact that patients might read their test results before the physician was seen as possibly harmful for patients and as an interference with their established work practices. They expected the occurrence of misunderstandings and needs for additional explanations, which would consequently increase their workload. Other perceptions were that the portal would increase controlling and monitoring of physicians and increase or create a feeling of mistrust from patients. Regarding benefits for the patients, most of the physicians believe there is only little value in the patient portal and that patients would mostly be worried and misunderstand the information provided. Supported by the study, we conclude: (1) The transfer of a paper-based health care process where patients read on paper into a digital process challenges current work practices and has consequences for the work environment. Mostly, this is explained by the changing positions between the physicians and the patient: the latter can drive the process, which reduces the physicians' ability to guide the patient. (2) The physicians' experiences were expressed as worries: patients would not understand the content of the record and become unnecessarily anxious from misunderstandings. The concerns are to some extent based on a generalized view of patients, which might disregard those, who already actively participate in health care. This study hence reveals a need to provide physicians with information about the values for patients from using patient portals. (3) A change of work practices may be beneficial to increase patient participation, but such changes should preferably be designed and discussed with physicians. However, the strong resistance from the physicians made this challenging when launching the patient portal.

Interactive mechanism of working environments and construction behaviors with cognitive work analysis: an elevator installation case study.

PubMed

Wang, Yanqing; Chong, Heap-Yih; Liao, Pin-Chao; Ren, Hantao

2017-09-25

Unsafe behavior is a leading factor in accidents, and the working environment significantly affects behaviors. However, few studies have focused on detailed mechanisms for addressing unsafe behaviors resulting from environmental constraints. This study aims to delineate these mechanisms using cognitive work analysis (CWA) for an elevator installation case study. Elevator installation was selected for study because it involves operations at heights: falls from heights remain a major cause of construction worker mortality. This study adopts a mixed research approach based on three research methodology stages. This research deconstructs the details of the working environment, the workers' decision-making processes, the strategies chosen given environmental conditions and the conceptual model for workers' behaviors, which jointly depict environment-behavior mechanisms at length. By applying CWA to the construction industry, environmental constraints can easily be identified, and targeted engineering suggestions can be generated.

Teachers' work ability: a study of relationships between collective efficacy and self-efficacy beliefs.

PubMed

Guidetti, Gloria; Viotti, Sara; Bruno, Andreina; Converso, Daniela

2018-01-01

Work ability constitutes one of the most studied well-being indicators related to work. Past research highlighted the relationship with work-related resources and demands, and personal resources. However, no studies highlight the role of collective and self-efficacy beliefs in sustaining work ability. The purpose of this study was to examine whether and by which mechanism work ability is linked with individual and collective efficacies in a sample of primary and middle school teachers. Using a dataset consisting of 415 primary and middle school Italian teachers, the analysis tested for the mediating role of self-efficacy between collective efficacy and work ability. Mediational analysis highlights that teachers' self-efficacy totally mediates the relationship between collective efficacy and perceived work ability. Results of this study enhance the theoretical knowledge and empirical evidence regarding the link between teachers' collective efficacy and self-efficacy, giving further emphasis to the concept of collective efficacy in school contexts. Moreover, the results contribute to the study of well-being in the teaching profession, highlighting a process that sustains and promotes levels of work ability through both collective and personal resources.

Measuring interdisciplinary research and education outcomes in the Vienna Doctoral Programme on Water Resource Systems

NASA Astrophysics Data System (ADS)

Carr, Gemma; Loucks, Daniel Pete; Blaschke, Alfred Paul; Bucher, Christian; Farnleitner, Andreas; Fürnkranz-Prskawetz, Alexia; Parajka, Juraj; Pfeifer, Norbert; Rechberger, Helmut; Wagner, Wolfgang; Zessner, Matthias; Blöschl, Günter

2015-04-01

The interdisciplinary postgraduate research and education programme - the Vienna Doctoral Programme on Water Resource Systems - was initiated in 2009. To date, 35 research students, three post-docs and ten faculty members have been engaged in the Programme, from ten research fields (aquatic microbiology, hydrology, hydro-climatology, hydro-geology, mathematical economics, photogrammetry, remote sensing, resource management, structural mechanics, and water quality). The Programme aims to develop research students with the capacity to work across the disciplines, to conduct cutting edge research and foster an international perspective. To do this, a variety of mechanisms are adopted that include research cluster groups, joint study sites, joint supervision, a basic study programme and a research semester abroad. The Programme offers a unique case study to explore if and how these mechanisms lead to research and education outcomes. Outcomes are grouped according to whether they are tangible (publications with co-authors from more than one research field, analysis of graduate profiles and career destinations) or non-tangible (interaction between researchers, networks and trust). A mixed methods approach that includes bibliometric analysis combined with interviews with students is applied. Bibliometric analysis shows that as the Programme has evolved the amount of multi-disciplinary work has increased (32% of the 203 full papers produced by the programme's researchers have authors from more than one research field). Network analysis to explore which research fields collaborate most frequently show that hydrology plays a significant role and has collaborated with seven of the ten research fields. Hydrology researchers seem to interact the most strongly with other research fields as they contribute understanding on water system processes. Network analysis to explore which individuals collaborate shows that much joint work takes place through the five research cluster groups (water resource management, land-surface processes, Hydrological Open Air Laboratory, water and health, modelling and risk). Student interviews highlight that trust between colleagues and supervisors, and the role of spaces for interaction (joint study sites, cluster group meetings, shared offices etc.) are important for joint work. Graduate analysis shows that students develop skills and confidence to work across disciplines through collaborating on their doctoral research. Working collaboratively during the doctorate appears to be strongly correlated with continuing to work in this way after graduation.

The Search for an Effective Clinical Behavior Analysis: The Nonlinear Thinking of Israel Goldiamond

PubMed Central

Layng, T.V Joe

2009-01-01

This paper has two purposes; the first is to reintroduce Goldiamond's constructional approach to clinical behavior analysis and to the field of behavior analysis as a whole, which, unfortunately, remains largely unaware of his nonlinear functional analysis and its implications. The approach is not simply a set of clinical techniques; instead it describes how basic, applied, and formal analyses may intersect to provide behavior-analytic solutions where the emphasis is on consequential selection. The paper takes the reader through a cumulative series of explorations, discoveries, and insights that hopefully brings the reader into contact with the power and comprehensiveness of Goldiamond's approach, and leads to an investigation of the original works cited. The second purpose is to provide the context of a life of scientific discovery that attempts to elucidate the variables and events that informed one of the most extraordinary scientific journeys in the history of behavior analysis, and expose the reader (especially young ones) to the exciting process of discovery followed by one of the field's most brilliant thinkers. One may perhaps consider this article a tribute to Goldiamond and his work, but the tribute is really to the process of scientific discovery over a professional lifetime. PMID:22478519

Building Bridges to Connect the Disconnects: An Analysis of Business Program Design Processes

ERIC Educational Resources Information Center

Fleming, Debra L.

2008-01-01

The purpose of this study is to analyze current trends of design processes and redesign efforts for business programs. A review of the literature suggests business schools are not preparing graduates of their programs with the necessary knowledge, skills and dispositions as deemed appropriate to succeed in the world of work. Some research studies…

Developing the Scale of Teacher Self-Efficacy in Teaching Process

ERIC Educational Resources Information Center

Korkmaz, Fahrettin; Unsal, Serkan

2016-01-01

The purpose of this study is to develop a reliable and valid measurement tool which will reveal teachers' self-competence in education process. Participants of the study are 300 teachers working at state primary schools in the province of Gaziantep. Results of the exploratory factor analysis administered to the scale in order to determine its…

Generating and Using Examples in the Proving Process

ERIC Educational Resources Information Center

Sandefur, J.; Mason, J.; Stylianides, G. J.; Watson, A.

2013-01-01

We report on our analysis of data from a dataset of 26 videotapes of university students working in groups of 2 and 3 on different proving problems. Our aim is to understand the role of example generation in the proving process, focusing on deliberate changes in representation and symbol manipulation. We suggest and illustrate four aspects of…

Professional and Creative Development of Natural Geographic Course Teachers within the Process of Professional Retraining

ERIC Educational Resources Information Center

Samigullina, Galina Savelevna; Gilmanchina, Syriya Irekovna; Gaisin, Ilgisar Timergalievich; Gilmanshin, Iskander Rafailevich; Rafailevna, Akchurina Ilsia

2015-01-01

The purpose of this article is to analyse the professional and creative development of natural geographic course teachers of the Republic of Tatarstan in the process of professional retraining. The method for work performing is a retrospective analysis of professional retraining of natural geographic course teachers within the higher professional…

Interactive Computing and Graphics in Undergraduate Digital Signal Processing. Microcomputing Working Paper Series F 84-9.

ERIC Educational Resources Information Center

Onaral, Banu; And Others

This report describes the development of a Drexel University electrical and computer engineering course on digital filter design that used interactive computing and graphics, and was one of three courses in a senior-level sequence on digital signal processing (DSP). Interactive and digital analysis/design routines and the interconnection of these…

Hypermedia Management in Television through Text Processing

ERIC Educational Resources Information Center

Caldera-Serrano, Jorge

2008-01-01

Purpose: This paper aims to describe a working routine for the analysis of audio-visual documents for serving the needs of television journalists. Design/methodology/approach: A description in the form of a synthesis is given of the process by which television information must be put at the user's disposal with a response that is both fast and…

Mapping Miles and Huberman's Within-Case and Cross-Case Analysis Methods onto the Literature Review Process

ERIC Educational Resources Information Center

Onwuegbuzie, Anthony J.; Weinbaum, Rebecca K.

2016-01-01

Recently, several authors have attempted to make the literature review process more transparent by providing a step-by-step guide to conducting literature reviews. However, although these works are very informative, none of them delineate how to display information extracted from literature reviews in a reader-friendly and visually appealing…

Work activity in the process of recovery - an interpretive phenomenological analysis of the experiences of people with a schizophrenia spectrum diagnosis.

PubMed

Pańczak, Anna; Pietkiewicz, Igor

2016-01-01

Having the opportunity to work has been found meaningful for individuals suffering from severe mental illness, in order to boost their self-esteem, provide a sense of control over their lives and of belonging to a community. There are no studies in Polish literature on the process of recovery from schizophrenia with reference to work activity. The objective of this research was to explore personal experiences of people employed in Vocational Development Centers. Eight semi-structured interviews were conducted with adult patients. Their transcripts were subject to interpretative phenomenological analysis (IPA). Having the opportunity to work was significant for participants because it mobilized them and encouraged self-care. G oing to work helped them overcome social isolation by meeting people with similar difficulties and those who did not suffer from mental illness. Financial gratification enables a sense of independence and the ability to develop skills to plan and control their budget. This study finds that patients who lost their jobs due to mental illness should be encouraged to utilize rehabilitation institutions to help them undertake work activity and use previously acquired qualifications or develop new skills. Access to appropriate psychological support should be provided during vocation reorientation and adaptation into new work environments. This helps patients regain a sense of control and purpose, and cope with losing valued social roles. We also highlight the need for further studies into challenges in the workplace and the strategies patients use to cope with them.

Development of a measure of work motivation for a meta-theory of motivation.

PubMed

Ryan, James C

2011-06-01

This study presents a measure of work motivation designed to assess the motivational concepts of the meta-theory of motivation. These concepts include intrinsic process motivation, goal internalization motivation, instrumental motivation, external self-concept motivation, and internal self-concept motivation. Following a process of statement development and identification, six statements for each concept were presented to a sample of working professionals (N = 330) via a paper-and-pencil questionnaire. Parallel analysis supported a 5-factor solution, with a varimax rotation identifying 5 factors accounting for 48.9% of total variance. All 5 scales had Cronbach alpha coefficients above .70. Limitations of the newly proposed questionnaire and suggestions for its further development and use are discussed.

Improvement of production layout based on optimum production balancing scale results by using Moodie Young and Comsoal method

NASA Astrophysics Data System (ADS)

Ikhsan, Siregar; Ulina Anastasia Sipangkar, Tri; Prasetio, Aji

2017-09-01

This research was conducted at a make to order production system company which is engaged in the car body of the vehicle. One of the products produced is dump truck which is one kind of transportation for the transport of goods equipped with hydraulics to facilitate goods’ loading and unloading process. The company has 7 work stations with different cycle times. Companies often experience delays in order delivery. The production process on the production floor has not been done optimally where there is a build up of work in process in some work centres. The build up of work in process (WIP) products is seen in the welding and painting stations. Stacking that occurs on the production line may cause the company to be liable for damages due to delays in product completion. The WIP occurs due to unbalanced paths can be seen from the variance of cycle time of each station is very diverse. The time difference of each work element is due to the allocation of work elements to each work centre unevenly. On the basis of the allocation of uneven work elements, the dump truck assembly line is made. The analysis is done by using Moodie Young and Comsoal method to do the balancing of production line. The result of layout improvement by using systematic layout planning (SLP) method is change the composition of the work centre from 7 into 4 work centre which enables the movement of material to be more effective and efficient so that it can get an efficient and effective production trajectory and can solve existing problems. The result of the track balancing is then used as a guide in constructing a new layout based on the balancing result with the most optimum method.

[Relationship between occupational stress and working ability of workers in a petroleum processing enterprise in high altitude area].

PubMed

Ma, X M; Kang, H L; Shi, C B; Li, Y; Wu, Y F; Liu, Z H; Wang, G; Lei, H Y

2017-12-20

Objective: To investigate the relationship between occupational stress and working ability of workers in a petroleum processing enterprise in a high altitude area. Methods: A total of 728 workers in a petroleum processing enterprise at an altitude of 2850 m were subjected to a survey using Occupational Stress Inventory (OSI) , Work Ability Index (WAI) Scale, Occupational Role Questionnaire (ORQ) , Personal Strain Questionnaire (PSQ) , and Personal Resource Questionnaire (PRQ) from May 2014 to August 2016. Results: Of the 728 workers, 55 (7.6%) had a poor working ability, moderate in 262 (35.9%) , and good in 411 (56.5%). There were significant differences in WAI between the workers with different types of work, sexes, ages, and working years ( P <0.05). There was a significant difference in WAI between different occupational stress groups ( P <0.05). WAI was negatively correlated with ORQ score and PSQ score ( r (s)=-0.387, P <0.05; r (s)=-0.467, P <0.05) and positively correlated with PRQ score ( r (s)=0.343, P <0.05). The multiple linear regression analysis showed that high ORQ score and PSQ score were the inhibitory factors for high WAI ( B =-0.058; B =-0.082) and high PRQ score was a contributing factor for high WAI ( B =0.029) . Conclusion: Occupational stress is an influencing factor for the working ability of workers in the petroleum processing enterprise in the high altitude area. Hypoxia in high altitude area may further reduce the working ability. In order to reduce occupational stress and improve work ability, it should be considered to strengthen skills training, improve the working environment, and pay attention to mental health.

A critical review of gender issues in understanding prolonged disability related to musculoskeletal pain: how are they relevant to rehabilitation?

PubMed

Côté, Daniel; Coutu, Marie-France

2010-01-01

The purpose of this critical review is to describe the available theoretical models for understanding the gender issues in prolonged work disability related to persistent musculoskeletal (MSK) pain. A critical literature review was conducted in medicine, health sciences, and social sciences databases (MEDLINE, CINHAL, PsychINFO and SOCINDEX) using specific keywords. After screening titles and abstracts, followed by methodological quality assessment, a total of 55 references were retained for content analysis. Gender issues in disability related to persistent MSK pain show that men and women may experience pain and rehabilitation process in different ways. Three main themes were exftracted and further described: (1) the experience of distrust; (2) the self-identity process; and (3) the domestic strain. Each of these themes has a specific and potentially different impact on men and women, and we report that experiential differences may strongly impact the rehabilitation process and outcomes such as return to work. This critical review provides insight into gender issues in the process of rehabilitation and outcomes such as return to work. We suggest that work and family considerations are the two most important issues in the rehabilitation process and that differences between men and women are likely to occur.

Job stress: an in-depth investigation based on the HSE questionnaire and a multistep approach in order to identify the most appropriate corrective actions.

PubMed

De Sio, S; Cedrone, F; Greco, E; Di Traglia, M; Sanità, D; Mandolesi, D; Stansfeld, S A

2016-01-01

Psychosocial hazards and work-related stress have reached epidemic proportions in Europe. The Italia law introduced in 2008 the obligation for Italian companies to assess work related stress risk in order to protect their workers' safety and health. The purpose of our study was to propose an accurate measurement tool, using the HSE indicator tool, for more appropriate and significant work-related stress' prevention measures. The study was conducted on 204 visual display unit (VDU) operators: 106 male and 98 female. All subjects were administered the HSE questionnaire. The sample was studied through a 4 step process, using HSE analysis tool and a statistical analysis, based on the odds ratio calculation. The assessment model used demonstrated the presence of work related stress in VDU operators and additional "critical" aspects which had failed to emerge by the classical use of HSE analysis tool. The approach we propose allows to obtain a complete picture of the perception of work-related stress and can point out the most appropriate corrective actions.

Social Network Supported Process Recommender System

PubMed Central

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced. PMID:24672309

A catalog of automated analysis methods for enterprise models.

PubMed

Florez, Hector; Sánchez, Mario; Villalobos, Jorge

2016-01-01

Enterprise models are created for documenting and communicating the structure and state of Business and Information Technologies elements of an enterprise. After models are completed, they are mainly used to support analysis. Model analysis is an activity typically based on human skills and due to the size and complexity of the models, this process can be complicated and omissions or miscalculations are very likely. This situation has fostered the research of automated analysis methods, for supporting analysts in enterprise analysis processes. By reviewing the literature, we found several analysis methods; nevertheless, they are based on specific situations and different metamodels; then, some analysis methods might not be applicable to all enterprise models. This paper presents the work of compilation (literature review), classification, structuring, and characterization of automated analysis methods for enterprise models, expressing them in a standardized modeling language. In addition, we have implemented the analysis methods in our modeling tool.

Improving Deliverability in Gas Storage Fields by Identifying the Timing and Sources of Damage Using Smart Well Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.H. Frantz Jr; K.G. Brown; W.K. Sawyer

2006-03-01

This report summarizes the work performed under contract DE-FC26-03NT41743. The primary objective of this study was to develop tools that would allow Underground Gas Storage (UGS) operators to use wellhead electronic flow measurement (EFM) data to quickly and efficiently identify trends in well damage over time, thus aiding in the identification of potential causes of the damage. Secondary objectives of this work included: (1) To assist UGS operators in the evaluation of hardware and software requirements for implementing an EFM system similar to the one described in this report, and (2) To provide a cost-benefit analysis framework UGS operators canmore » use to evaluate economic benefits of installing wellhead EFM systems in their particular fields. Assessment of EFM data available for use, and selection of the specific study field are reviewed. The various EFM data processing tasks, including data collection, organization, extraction, processing, and interpretation are discussed. The process of damage assessment via pressure transient analysis of EFM data is outlined and demonstrated, including such tasks as quality control, semi-log analysis, and log-log analysis of pressure transient test data extracted from routinely collected EFM data. Output from pressure transient test analyses for 21 wells is presented, and the interpretation of these analyses to determine the timing of damage development is demonstrated using output from specific study wells. Development of processing and interpretation modules to handle EFM data interpretation in horizontal wells is also a presented and discussed. A spreadsheet application developed to aid underground gas storage operators in the selection of EFM equipment is presented, discussed, and used to determine the cost benefit of installing EFM equipment in a gas storage field. Recommendations for future work related to EFM in gas storage fields are presented and discussed.« less

Quality initiatives: lean approach to improving performance and efficiency in a radiology department.

PubMed

Kruskal, Jonathan B; Reedy, Allen; Pascal, Laurie; Rosen, Max P; Boiselle, Phillip M

2012-01-01

Many hospital radiology departments are adopting "lean" methods developed in automobile manufacturing to improve operational efficiency, eliminate waste, and optimize the value of their services. The lean approach, which emphasizes process analysis, has particular relevance to radiology departments, which depend on a smooth flow of patients and uninterrupted equipment function for efficient operation. However, the application of lean methods to isolated problems is not likely to improve overall efficiency or to produce a sustained improvement. Instead, the authors recommend a gradual but continuous and comprehensive "lean transformation" of work philosophy and workplace culture. Fundamental principles that must consistently be put into action to achieve such a transformation include equal involvement of and equal respect for all staff members, elimination of waste, standardization of work processes, improvement of flow in all processes, use of visual cues to communicate and inform, and use of specific tools to perform targeted data collection and analysis and to implement and guide change. Many categories of lean tools are available to facilitate these tasks: value stream mapping for visualizing the current state of a process and identifying activities that add no value; root cause analysis for determining the fundamental cause of a problem; team charters for planning, guiding, and communicating about change in a specific process; management dashboards for monitoring real-time developments; and a balanced scorecard for strategic oversight and planning in the areas of finance, customer service, internal operations, and staff development. © RSNA, 2012.

Auditory motion-specific mechanisms in the primate brain

PubMed Central

Baumann, Simon; Dheerendra, Pradeep; Joly, Olivier; Hunter, David; Balezeau, Fabien; Sun, Li; Rees, Adrian; Petkov, Christopher I.; Thiele, Alexander; Griffiths, Timothy D.

2017-01-01

This work examined the mechanisms underlying auditory motion processing in the auditory cortex of awake monkeys using functional magnetic resonance imaging (fMRI). We tested to what extent auditory motion analysis can be explained by the linear combination of static spatial mechanisms, spectrotemporal processes, and their interaction. We found that the posterior auditory cortex, including A1 and the surrounding caudal belt and parabelt, is involved in auditory motion analysis. Static spatial and spectrotemporal processes were able to fully explain motion-induced activation in most parts of the auditory cortex, including A1, but not in circumscribed regions of the posterior belt and parabelt cortex. We show that in these regions motion-specific processes contribute to the activation, providing the first demonstration that auditory motion is not simply deduced from changes in static spatial location. These results demonstrate that parallel mechanisms for motion and static spatial analysis coexist within the auditory dorsal stream. PMID:28472038

The effect of boriding on wear resistance of cold work tool steel

NASA Astrophysics Data System (ADS)

Anzawa, Y.; Koyama, S.; Shohji, I.

2017-05-01

Recently, boriding has attracted extensive attention as surface stiffening processing of plain steel. In this research, the influence of processing time on the formation layer of cold work tool steel (KD11MAX) by Al added fused salt bath was examined. In addition, in order to improve the abrasion resistance of KD11MAX, the effect of the treatment of boronization on the formation layer has been investigated. Boriding were performed in molten borax which contained about 10 mass% Al at processing time of 1.8 ~ 7.2 ks (processing temperature of 1303 K). As a result of the examination, the hardness of the boriding layer becomes about 1900 HV when the processing time of 3.6 ks. Also the abrasion resistance has improved remarkably. Furthermore, it was revealed that the formation layer was boronized iron from the Vickers hardness and analysis of the X-ray diffraction measurement.

Representations of Complexity: How Nature Appears in Our Theories

PubMed Central

2013-01-01

In science we study processes in the material world. The way these processes operate can be discovered by conducting experiments that activate them, and findings from such experiments can lead to functional complexity theories of how the material processes work. The results of a good functional theory will agree with experimental measurements, but the theory may not incorporate in its algorithmic workings a representation of the material processes themselves. Nevertheless, the algorithmic operation of a good functional theory may be said to make contact with material reality by incorporating the emergent computations the material processes carry out. These points are illustrated in the experimental analysis of behavior by considering an evolutionary theory of behavior dynamics, the algorithmic operation of which does not correspond to material features of the physical world, but the functional output of which agrees quantitatively and qualitatively with findings from a large body of research with live organisms. PMID:28018044

Building organizational supports for knowledge sharing in county human service organizations: a cross-case analysis of works-in-progress.

PubMed

Lee, Chris; Austin, Michael J

2012-01-01

Building on the literature related to evidence-based practice, knowledge management, and learning organizations, this cross-case analysis presents twelve works-in-progress in ten local public human service organizations seeking to develop their own knowledge sharing systems. The data for this cross-case analysis can be found in the various contributions to this Special Issue. The findings feature the developmental aspects of building a learning organization that include knowledge sharing systems featuring transparency, self-assessment, and dissemination and utilization. Implications for practice focus on the structure and processes involved in building knowledge sharing teams inside public human service organizations. Copyright © Taylor & Francis Group, LLC

Investigation Of In-Line Monitoring Options At H Canyon/HB Line For Plutonium Oxide Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sexton, L.

2015-10-14

H Canyon and HB Line have a production goal of 1 MT per year of plutonium oxide feedstock for the MOX facility by FY17 (AFS-2 mission). In order to meet this goal, steps will need to be taken to improve processing efficiency. One concept for achieving this goal is to implement in-line process monitoring at key measurement points within the facilities. In-line monitoring during operations has the potential to increase throughput and efficiency while reducing costs associated with laboratory sample analysis. In the work reported here, we mapped the plutonium oxide process, identified key measurement points, investigated alternate technologies thatmore » could be used for in-line analysis, and initiated a throughput benefit analysis.« less

Neural network system and methods for analysis of organic materials and structures using spectral data

DOEpatents

Meyer, Bernd J.; Sellers, Jeffrey P.; Thomsen, Jan U.

1993-01-01

Apparatus and processes for recognizing and identifying materials. Characteristic spectra are obtained for the materials via spectroscopy techniques including nuclear magnetic resonance spectroscopy, infrared absorption analysis, x-ray analysis, mass spectroscopy and gas chromatography. Desired portions of the spectra may be selected and then placed in proper form and format for presentation to a number of input layer neurons in an offline neural network. The network is first trained according to a predetermined training process; it may then be employed to identify particular materials. Such apparatus and processes are particularly useful for recognizing and identifying organic compounds such as complex carbohydrates, whose spectra conventionally require a high level of training and many hours of hard work to identify, and are frequently indistinguishable from one another by human interpretation.

Safety and Security Interface Technology Initiative

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Michael A. Lehto; Kevin J. Carroll; Dr. Robert Lowrie

Safety and Security Interface Technology Initiative Mr. Kevin J. Carroll Dr. Robert Lowrie, Dr. Micheal Lehto BWXT Y12 NSC Oak Ridge, TN 37831 865-576-2289/865-241-2772 carrollkj@y12.doe.gov Work Objective. Earlier this year, the Energy Facility Contractors Group (EFCOG) was asked to assist in developing options related to acceleration deployment of new security-related technologies to assist meeting design base threat (DBT) needs while also addressing the requirements of 10 CFR 830. NNSA NA-70, one of the working group participants, designated this effort the Safety and Security Interface Technology Initiative (SSIT). Relationship to Workshop Theme. “Supporting Excellence in Operations Through Safety Analysis,” (workshop theme)more » includes security and safety personnel working together to ensure effective and efficient operations. One of the specific workshop elements listed in the call for papers is “Safeguards/Security Integration with Safety.” This paper speaks directly to this theme. Description of Work. The EFCOG Safety Analysis Working Group (SAWG) and the EFCOG Security Working Group formed a core team to develop an integrated process involving both safety basis and security needs allowing achievement of the DBT objectives while ensuring safety is appropriately considered. This effort garnered significant interest, starting with a two day breakout session of 30 experts at the 2006 Safety Basis Workshop. A core team was formed, and a series of meetings were held to develop that process, including safety and security professionals, both contractor and federal personnel. A pilot exercise held at Idaho National Laboratory (INL) in mid-July 2006 was conducted as a feasibility of concept review. Work Results. The SSIT efforts resulted in a topical report transmitted from EFCOG to DOE/NNSA in August 2006. Elements of the report included: Drivers and Endstate, Control Selections Alternative Analysis Process, Terminology Crosswalk, Safety Basis/Security Documentation Integration, Configuration Control, and development of a shared ‘tool box’ of information/successes. Specific Benefits. The expectation or end state resulting from the topical report and associated implementation plan includes: (1) A recommended process for handling the documentation of the security and safety disciplines, including an appropriate change control process and participation by all stakeholders. (2) A means to package security systems with sufficient information to help expedite the flow of that system through the process. In addition, a means to share successes among sites, to include information and safety basis to the extent such information is transportable. (3) Identification of key security systems and associated essential security elements being installed and an arrangement for the sites installing these systems to host an appropriate team to review a specific system and determine what information is exportable. (4) Identification of the security systems’ essential elements and appropriate controls required for testing of these essential elements in the facility. (5) The ability to help refine and improve an agreed to control set at the manufacture stage.« less

Surface enhancement of cold work tool steels by friction stir processing with a pinless tool

NASA Astrophysics Data System (ADS)

Costa, M. I.; Verdera, D.; Vieira, M. T.; Rodrigues, D. M.

2014-03-01

The microstructure and mechanical properties of enhanced tool steel (AISI D2) surfaces produced using a friction stir welding (FSW) related procedure, called friction stir processing (FSP), are analysed in this work. The surface of the tool steel samples was processed using a WC-Co pinless tool and varying processing conditions. Microstructural analysis revealed that meanwhile the original substrate structure consisted of a heterogeneous distribution of coarse carbides in a ferritic matrix, the transformed surfaces consisted of very small carbides, homogenously distributed in a ferrite- bainite- martensite matrix. The morphology of the surfaces, as well as its mechanical properties, evaluated by hardness and tensile testing, were found to vary with increasing tool rotation speed. Surface hardness was drastically increased, relative to the initial hardness of bulk steel. This was attributed to ferrite and carbide refinement, as well as to martensite formation during solid state processing. At the highest rotation rates, tool sliding during processing deeply compromised the characteristics of the processed surfaces.

Therapist strategies early in therapy associated with good or poor outcomes among clients with low proactive agency.

PubMed

von der Lippe, Anna Louise; Oddli, Hanne Weie; Halvorsen, Margrethe Seeger

2017-09-10

Within a mixed methods program of research the present study aimed at expanding knowledge about interactions in the initial therapeutic collaboration by combining focus on client interpersonal style and therapist contribution. The study involves in-depth analyses of therapist-client interactions in the initial two sessions of good and poor outcome therapies. Based on interpersonal theory and previous research, the Inventory of Interpersonal Problems (IIP-64-C) was used to define poor outcome cases, that is, low proactive agency cases. To compare good and poor outcome cases matched on this interpersonal pattern, cases were drawn from two different samples; nine poor outcome cases from a large multi-site outpatient clinic study and nine good outcome cases from a process-outcome study of highly experienced therapists. Qualitative analysis of therapist behaviors resulted in 2 main categories, fostering client's proactive agentic involvement in change work and discouraging client's proactive agentic involvement in change work, 8 categories and 22 sub-categories. The findings revealed distinct and cohesive differences in therapist behaviors between the two outcome groups, and point to the particular therapist role of fostering client agency through engagement in a shared work on change when clients display strong unassertiveness and low readiness for change. Clinical or Methodological Significance Summary: The present analysis combines focus on client interpersonal style, therapist strategies/process and outcome. The categories generated from the present grounded theory analysis may serve as a foundation for identifying interactions that are associated with agentic involvement in future process research and practice, and hence we have formulated principles/strategies that were identified by the analysis.

Unlikely Fluctuations and Non-Equilibrium Work Theorems-A Simple Example.

PubMed

Muzikar, Paul

2016-06-30

An exciting development in statistical mechanics has been the elucidation of a series of surprising equalities involving the work done during a nonequilibrium process. Astumian has presented an elegant example of such an equality, involving a colloidal particle undergoing Brownian motion in the presence of gravity. We analyze this example; its simplicity, and its link to geometric Brownian motion, allows us to clarify the inner workings of the equality. Our analysis explicitly shows the important role played by large, unlikely fluctuations.

The Participation to The All Japan College of Technology Design Competition and The Trial of Art and Design Education

NASA Astrophysics Data System (ADS)

Kato, Kenji; Takeshita, Junji

The works of Toyota national college of technology gets excellent result on structural design competition (bridge contest) of national college design competition. This paper reports planning and making process of these works. As increase strength of the structures, it is important point the determination of structural type by numerical analysis and test, and precision of production and idea of joining. Second, it reports the curriculum of special items connection with excellent works.

Optimal estimates of free energies from multistate nonequilibrium work data.

PubMed

Maragakis, Paul; Spichty, Martin; Karplus, Martin

2006-03-17

We derive the optimal estimates of the free energies of an arbitrary number of thermodynamic states from nonequilibrium work measurements; the work data are collected from forward and reverse switching processes and obey a fluctuation theorem. The maximum likelihood formulation properly reweights all pathways contributing to a free energy difference and is directly applicable to simulations and experiments. We demonstrate dramatic gains in efficiency by combining the analysis with parallel tempering simulations for alchemical mutations of model amino acids.

Development and application of computer assisted optimal method for treatment of femoral neck fracture.

PubMed

Wang, Monan; Zhang, Kai; Yang, Ning

2018-04-09

To help doctors decide their treatment from the aspect of mechanical analysis, the work built a computer assisted optimal system for treatment of femoral neck fracture oriented to clinical application. The whole system encompassed the following three parts: Preprocessing module, finite element mechanical analysis module, post processing module. Preprocessing module included parametric modeling of bone, parametric modeling of fracture face, parametric modeling of fixed screw and fixed position and input and transmission of model parameters. Finite element mechanical analysis module included grid division, element type setting, material property setting, contact setting, constraint and load setting, analysis method setting and batch processing operation. Post processing module included extraction and display of batch processing operation results, image generation of batch processing operation, optimal program operation and optimal result display. The system implemented the whole operations from input of fracture parameters to output of the optimal fixed plan according to specific patient real fracture parameter and optimal rules, which demonstrated the effectiveness of the system. Meanwhile, the system had a friendly interface, simple operation and could improve the system function quickly through modifying single module.

Considerations for Using Agile in DoD Acquisition

DTIC Science & Technology

2010-04-01

successfully used in manufacturing throughout the world for decades, such as ―just-in- time,‖ Lean, Kanban , and work-flow-based planning. Another new...of this analysis is provided in Table 2. 29 Kanban / lean style of Agile might be the most relevant for this phase. 31 | CMU/SEI-2010-TN-002...family of approaches, including Kanban [14], Rational Unified Process (RUP), Personal Software Process (PSP), Team Software Process (TSP), and Cleanroom

Finite element analysis of chip formation usingale method

NASA Astrophysics Data System (ADS)

Jayaprakash, V.

2017-05-01

In recent times, many studies made in FEM on plain isotropic metal plate formulation. The stress analysis plays the significant role in the stability of structural safety and system. The stress and distortion estimation is very helpful for designing and manufacturing product well. Usually the residual stress and plastic strain determine the fatigue life of structure, it also plays the significant role in designing and choosing material. When the load magnitude increases the crack starts to form, decreasing the work load and the residual stress reduces the damage of the metal. The manufacturing process is a key parameter in process and forming the part of any system. However, machining operation involves complex thing like hot development, material property and other estimates based on transition of the plastic strain and residual stress. The reduction of residual stress plays the complexity role in the finite element study. This paper deals with the manufacturing process with less residual stress and strain. The results shows that, by applying the ALE method in machining we can reduce the load on the work piece hence the life type of the work piece can be increased. We also investigate the cutting tool wear and there efficiency since it is a essential machine member in fabrication technology. ABAQUS platform used to solve the machining operation

Performance and Reliability Optimization for Aerospace Systems subject to Uncertainty and Degradation

NASA Technical Reports Server (NTRS)

Miller, David W.; Uebelhart, Scott A.; Blaurock, Carl

2004-01-01

This report summarizes work performed by the Space Systems Laboratory (SSL) for NASA Langley Research Center in the field of performance optimization for systems subject to uncertainty. The objective of the research is to develop design methods and tools to the aerospace vehicle design process which take into account lifecycle uncertainties. It recognizes that uncertainty between the predictions of integrated models and data collected from the system in its operational environment is unavoidable. Given the presence of uncertainty, the goal of this work is to develop means of identifying critical sources of uncertainty, and to combine these with the analytical tools used with integrated modeling. In this manner, system uncertainty analysis becomes part of the design process, and can motivate redesign. The specific program objectives were: 1. To incorporate uncertainty modeling, propagation and analysis into the integrated (controls, structures, payloads, disturbances, etc.) design process to derive the error bars associated with performance predictions. 2. To apply modern optimization tools to guide in the expenditure of funds in a way that most cost-effectively improves the lifecycle productivity of the system by enhancing the subsystem reliability and redundancy. The results from the second program objective are described. This report describes the work and results for the first objective: uncertainty modeling, propagation, and synthesis with integrated modeling.

How authors did it - a methodological analysis of recent engineering education research papers in the European Journal of Engineering Education

NASA Astrophysics Data System (ADS)

Malmi, Lauri; Adawi, Tom; Curmi, Ronald; de Graaff, Erik; Duffy, Gavin; Kautz, Christian; Kinnunen, Päivi; Williams, Bill

2018-03-01

We investigated research processes applied in recent publications in the European Journal of Engineering Education (EJEE), exploring how papers link to theoretical work and how research processes have been designed and reported. We analysed all 155 papers published in EJEE in 2009, 2010 and 2013, classifying the papers using a taxonomy of research processes in engineering education research (EER) (Malmi et al. 2012). The majority of the papers presented either empirical work (59%) or were case reports (27%). Our main findings are as follows: (1) EJEE papers build moderately on a wide selection of theoretical work; (2) a great majority of papers have a clear research strategy, but data analysis methods are mostly simple descriptive statistics or simple/undocumented qualitative research methods; and (3) there are significant shortcomings in reporting research questions, methodology and limitations of studies. Our findings are consistent with and extend analyses of EER papers in other publishing venues; they help to build a clearer picture of the research currently published in EJEE and allow us to make recommendations for consideration by the editorial team of the journal. Our employed procedure also provides a framework that can be applied to monitor future global evolution of this and other EER journals.

Linear Covariance Analysis and Epoch State Estimators

NASA Technical Reports Server (NTRS)

Markley, F. Landis; Carpenter, J. Russell

2014-01-01

This paper extends in two directions the results of prior work on generalized linear covariance analysis of both batch least-squares and sequential estimators. The first is an improved treatment of process noise in the batch, or epoch state, estimator with an epoch time that may be later than some or all of the measurements in the batch. The second is to account for process noise in specifying the gains in the epoch state estimator. We establish the conditions under which the latter estimator is equivalent to the Kalman filter.

Linear Covariance Analysis and Epoch State Estimators

NASA Technical Reports Server (NTRS)

Markley, F. Landis; Carpenter, J. Russell

2012-01-01

This paper extends in two directions the results of prior work on generalized linear covariance analysis of both batch least-squares and sequential estimators. The first is an improved treatment of process noise in the batch, or epoch state, estimator with an epoch time that may be later than some or all of the measurements in the batch. The second is to account for process noise in specifying the gains in the epoch state estimator. We establish the conditions under which the latter estimator is equivalent to the Kalman filter.

Improving patient care through student leadership in team quality improvement projects.

PubMed

Tschannen, Dana; Aebersold, Michelle; Kocan, Mary Jo; Lundy, Francene; Potempa, Kathleen

2015-01-01

In partnership with a major medical center, senior-level nursing students completed a root cause analysis and implementation plan to address a unit-specific quality issue. To evaluate the project, unit leaders were asked their perceptions of the value of the projects and impact on patient care, as well as to provide exemplars depicting how the student root cause analysis work resulted in improved patient outcome and/or unit processes. Liaisons noted benefits of having an RCA team, with positive impact on patient outcomes and care processes.

Human Factors Analysis to Improve the Processing of Ares-1 Launch Vehicle

NASA Technical Reports Server (NTRS)

Stambolian, Damon B.; Dippolito, Gregory M.; Nyugen, Bao; Dischinger, Charles; Tran, Donald; Henderson, Gena; Barth, Tim

2011-01-01

This slide presentation reviews the use of Human Factors analysis in improving the ground processing procedures for the Ares-1 launch vehicle. The light vehicle engineering designers for Ares-l launch vehicle had to design the flight vehicle for effective, efficient and safe ground operations in the cramped dimensions in a rocket design. The use of a mockup of the area where the technician would be required to work proved to be a very effective method to promote the collaboration between the Ares-1 designers and the ground operations personnel.

Developing a framework for transferring knowledge into action: a thematic analysis of the literature

PubMed Central

Ward, Vicky; House, Allan; Hamer, Susan

2010-01-01

Objectives Although there is widespread agreement about the importance of transferring knowledge into action, we still lack high quality information about what works, in which settings and with whom. Whilst there are a large number of models and theories for knowledge transfer interventions, they are untested meaning that their applicability and relevance is largely unknown. This paper describes the development of a conceptual framework of translating knowledge into action and discusses how it can be used for developing a useful model of the knowledge transfer process. Methods A narrative review of the knowledge transfer literature identified 28 different models which explained all or part of the knowledge transfer process. The models were subjected to a thematic analysis to identify individual components and the types of processes used when transferring knowledge into action. The results were used to build a conceptual framework of the process. Results Five common components of the knowledge transfer process were identified: problem identification and communication; knowledge/research development and selection; analysis of context; knowledge transfer activities or interventions; and knowledge/research utilization. We also identified three types of knowledge transfer processes: a linear process; a cyclical process; and a dynamic multidirectional process. From these results a conceptual framework of knowledge transfer was developed. The framework illustrates the five common components of the knowledge transfer process and shows that they are connected via a complex, multidirectional set of interactions. As such the framework allows for the individual components to occur simultaneously or in any given order and to occur more than once during the knowledge transfer process. Conclusion Our framework provides a foundation for gathering evidence from case studies of knowledge transfer interventions. We propose that future empirical work is designed to test and refine the relevant importance and applicability of each of the components in order to build more useful models of knowledge transfer which can serve as a practical checklist for planning or evaluating knowledge transfer activities. PMID:19541874

Comparison of pre-processing techniques for fluorescence microscopy images of cells labeled for actin.

PubMed

Muralidhar, Gautam S; Channappayya, Sumohana S; Slater, John H; Blinka, Ellen M; Bovik, Alan C; Frey, Wolfgang; Markey, Mia K

2008-11-06

Automated analysis of fluorescence microscopy images of endothelial cells labeled for actin is important for quantifying changes in the actin cytoskeleton. The current manual approach is laborious and inefficient. The goal of our work is to develop automated image analysis methods, thereby increasing cell analysis throughput. In this study, we present preliminary results on comparing different algorithms for cell segmentation and image denoising.

A Pragmatic Cognitive System Engineering Approach to Model Dynamic Human Decision-Making Activities in Intelligent and Automated Systems

DTIC Science & Technology

2003-10-01

Among the procedures developed to identify cognitive processes, there are the Cognitive Task Analysis (CTA) and the Cognitive Work Analysis (CWA...of Cognitive Task Design. [11] Potter, S.S., Roth, E.M., Woods, D.D., and Elm, W.C. (2000). Cognitive Task Analysis as Bootstrapping Multiple...Converging Techniques, In Schraagen, Chipman, and Shalin (Eds.). Cognitive Task Analysis . Mahwah, NJ: Lawrence Erlbaum Associates. [12] Roth, E.M

CRAB3: Establishing a new generation of services for distributed analysis at CMS

NASA Astrophysics Data System (ADS)

Cinquilli, M.; Spiga, D.; Grandi, C.; Hernàndez, J. M.; Konstantinov, P.; Mascheroni, M.; Riahi, H.; Vaandering, E.

2012-12-01

In CMS Computing the highest priorities for analysis tools are the improvement of the end users’ ability to produce and publish reliable samples and analysis results as well as a transition to a sustainable development and operations model. To achieve these goals CMS decided to incorporate analysis processing into the same framework as data and simulation processing. This strategy foresees that all workload tools (TierO, Tier1, production, analysis) share a common core with long term maintainability as well as the standardization of the operator interfaces. The re-engineered analysis workload manager, called CRAB3, makes use of newer technologies, such as RESTFul based web services and NoSQL Databases, aiming to increase the scalability and reliability of the system. As opposed to CRAB2, in CRAB3 all work is centrally injected and managed in a global queue. A pool of agents, which can be geographically distributed, consumes work from the central services serving the user tasks. The new architecture of CRAB substantially changes the deployment model and operations activities. In this paper we present the implementation of CRAB3, emphasizing how the new architecture improves the workflow automation and simplifies maintainability. In particular, we will highlight the impact of the new design on daily operations.

Using Student Writing and Lexical Analysis to Reveal Student Thinking about the Role of Stop Codons in the Central Dogma

PubMed Central

Prevost, Luanna B.; Smith, Michelle K.; Knight, Jennifer K.

2016-01-01

Previous work has shown that students have persistent difficulties in understanding how central dogma processes can be affected by a stop codon mutation. To explore these difficulties, we modified two multiple-choice questions from the Genetics Concept Assessment into three open-ended questions that asked students to write about how a stop codon mutation potentially impacts replication, transcription, and translation. We then used computer-assisted lexical analysis combined with human scoring to categorize student responses. The lexical analysis models showed high agreement with human scoring, demonstrating that this approach can be successfully used to analyze large numbers of student written responses. The results of this analysis show that students’ ideas about one process in the central dogma can affect their thinking about subsequent and previous processes, leading to mixed models of conceptual understanding. PMID:27909016

Automated Sensitivity Analysis of Interplanetary Trajectories

NASA Technical Reports Server (NTRS)

Knittel, Jeremy; Hughes, Kyle; Englander, Jacob; Sarli, Bruno

2017-01-01

This work describes a suite of Python tools known as the Python EMTG Automated Trade Study Application (PEATSA). PEATSA was written to automate the operation of trajectory optimization software, simplify the process of performing sensitivity analysis, and was ultimately found to out-perform a human trajectory designer in unexpected ways. These benefits will be discussed and demonstrated on sample mission designs.

Challenges of working with FIADB17 data: the SOLE experience

Treesearch

Michael Spinney; Paul Van Deusen

2007-01-01

The Southern On Line Estimator (SOLE) is an Internet-based Forest Inventory and Analysis (FIA) data analysis tool. SOLE is based on data downloaded from the publicly available FIA database (FIADB) and summarized by plot condition. The tasks of downloading, processing, and summarizing FIADB data require specialized expertise in inventory theory and data manipulation....

Multi Objective Optimization of Multi Wall Carbon Nanotube Based Nanogrinding Wheel Using Grey Relational and Regression Analysis

NASA Astrophysics Data System (ADS)

Sethuramalingam, Prabhu; Vinayagam, Babu Kupusamy

2016-07-01

Carbon nanotube mixed grinding wheel is used in the grinding process to analyze the surface characteristics of AISI D2 tool steel material. Till now no work has been carried out using carbon nanotube based grinding wheel. Carbon nanotube based grinding wheel has excellent thermal conductivity and good mechanical properties which are used to improve the surface finish of the workpiece. In the present study, the multi response optimization of process parameters like surface roughness and metal removal rate of grinding process of single wall carbon nanotube (CNT) in mixed cutting fluids is undertaken using orthogonal array with grey relational analysis. Experiments are performed with designated grinding conditions obtained using the L9 orthogonal array. Based on the results of the grey relational analysis, a set of optimum grinding parameters is obtained. Using the analysis of variance approach the significant machining parameters are found. Empirical model for the prediction of output parameters has been developed using regression analysis and the results are compared empirically, for conditions of with and without CNT grinding wheel in grinding process.

The overload at work and outside of work: the case of woman operators of blistering.

PubMed

Simões, Raoni Rocha; Figueiredo, Vitor Guilherme Carneiro

2012-01-01

The internationalization of labor is a prominent feature of the economy today, but is accompanied by adverse effects on operator health. In general, musculoskeletal diseases are the first to appear in this context. The open observations activity and interviews with operators and the hierarchy have been made to discover the organizational constraints. Other interviews were also conducted to account for the determinants of activity outside of work. The use of video has allowed the registration of work cycles, which helped to describe and quantify the postures and gestures to establish a possible link between musculoskeletal diseases and work activity. The collected data were processed using software Actogram Kronos. To understand the process of origin of these diseases, the analysis of the socioeconomic context is also essential because they in part determine the organization of certain companies. The objective of this paper was to discuss the activities of operators of blistering in both work and outside work. The goal is to determine the constraints presents in these two spheres of activity, that may increase the risk of developing musculoskeletal diseases and to define their interaction.

Task–Technology Fit of Video Telehealth for Nurses in an Outpatient Clinic Setting

PubMed Central

Finkelstein, Stanley M.

2014-01-01

Abstract Background: Incorporating telehealth into outpatient care delivery supports management of consumer health between clinic visits. Task–technology fit is a framework for understanding how technology helps and/or hinders a person during work processes. Evaluating the task–technology fit of video telehealth for personnel working in a pediatric outpatient clinic and providing care between clinic visits ensures the information provided matches the information needed to support work processes. Materials and Methods: The workflow of advanced practice registered nurse (APRN) care coordination provided via telephone and video telehealth was described and measured using a mixed-methods workflow analysis protocol that incorporated cognitive ethnography and time–motion study. Qualitative and quantitative results were merged and analyzed within the task–technology fit framework to determine the workflow fit of video telehealth for APRN care coordination. Results: Incorporating video telehealth into APRN care coordination workflow provided visual information unavailable during telephone interactions. Despite additional tasks and interactions needed to obtain the visual information, APRN workflow efficiency, as measured by time, was not significantly changed. Analyzed within the task–technology fit framework, the increased visual information afforded by video telehealth supported the assessment and diagnostic information needs of the APRN. Conclusions: Telehealth must provide the right information to the right clinician at the right time. Evaluating task–technology fit using a mixed-methods protocol ensured rigorous analysis of fit within work processes and identified workflows that benefit most from the technology. PMID:24841219

Early-return-to-work in the context of an intensification of working life and changing employment relationships.

PubMed

Seing, Ida; MacEachen, Ellen; Ståhl, Christian; Ekberg, Kerstin

2015-03-01

Many Western welfare states have introduced early-return-to-work policies, in which getting sick-listed people back to work before they have fully recovered is presented as a rather unproblematic approach. This reflects a belief in the ability of employers and the labour market to solve sickness absence. Against this background, the aim of this study was to analyse return-to-work practice in local workplace contexts, in relation to Swedish early-return-to-work policy. Semi-structured interviews were conducted with 18 matched pairs of workers and managers. The material, comprising a total of 36 interviews, was analysed using qualitative content analysis. Three main themes were identified: (1) intensive workplaces and work conditions (2) employer support-a function of worker value and (3) work attachment and resistance to job transition. The results reflected the intensity of modern working life, which challenged return-to-work processes. Managers had different approaches to workers' return-to-work, depending on how they valued the worker. While managers used the discourse of 'new opportunities' and 'healthy change' to describe the transition process (e.g. relocation, unemployment and retirement), workers regularly experienced transitions as difficult and unjust. In the context of early-return-to-work policy and the intensity of modern working life, a great deal of responsibility was placed on workers to be adaptable to workplace demands in order to be able to return and stay at work. Overall, this study illustrates an emerging social climate where sick-listed workers are positioned as active agents who must take responsibility for sick leave and return-to-work process.

A hierarchical network-based algorithm for multi-scale watershed delineation

NASA Astrophysics Data System (ADS)

Castronova, Anthony M.; Goodall, Jonathan L.

2014-11-01

Watershed delineation is a process for defining a land area that contributes surface water flow to a single outlet point. It is a commonly used in water resources analysis to define the domain in which hydrologic process calculations are applied. There has been a growing effort over the past decade to improve surface elevation measurements in the U.S., which has had a significant impact on the accuracy of hydrologic calculations. Traditional watershed processing on these elevation rasters, however, becomes more burdensome as data resolution increases. As a result, processing of these datasets can be troublesome on standard desktop computers. This challenge has resulted in numerous works that aim to provide high performance computing solutions to large data, high resolution data, or both. This work proposes an efficient watershed delineation algorithm for use in desktop computing environments that leverages existing data, U.S. Geological Survey (USGS) National Hydrography Dataset Plus (NHD+), and open source software tools to construct watershed boundaries. This approach makes use of U.S. national-level hydrography data that has been precomputed using raster processing algorithms coupled with quality control routines. Our approach uses carefully arranged data and mathematical graph theory to traverse river networks and identify catchment boundaries. We demonstrate this new watershed delineation technique, compare its accuracy with traditional algorithms that derive watershed solely from digital elevation models, and then extend our approach to address subwatershed delineation. Our findings suggest that the open-source hierarchical network-based delineation procedure presented in the work is a promising approach to watershed delineation that can be used summarize publicly available datasets for hydrologic model input pre-processing. Through our analysis, we explore the benefits of reusing the NHD+ datasets for watershed delineation, and find that the our technique offers greater flexibility and extendability than traditional raster algorithms.

Exposure assessment of carbon nanotubes at pilot factory focusing on quantitative determination of catalytic metals.

PubMed

Kato, Nobuyuki; Nagaya, Taiki; Matsui, Yasuto; Yoneda, Minoru

2017-11-25

The application of multiwall carbon nanotubes (MWCNTs) currently extends to various fields. However, it has been reported that exposure to CNT causes hazardous effects on animals and cells. The purpose of this study was to quantify the exposure to MWCNT in MWCNT/polymer composites for exposure assessment. We focused on catalytic metals included in the MWCNT and the diameter of dust released during the working processes. Although the Co in MWCNTs is not a common catalyst, it was used as a tracer in this study. A field survey was conducted in a MWCNT/polymer composite pilot factory. Airborne MWCNTs were monitored using black carbon monitors (BCMs) and optical particle sizers (OPSs) and collected on a filter. The MWCNT powder, all polymer resins used during the working processes, and the filter were analyzed in our lab using inductively coupled plasma mass spectrometry (ICP-MS) and electron microscopic observation. The mean concentration of airborne MWCNT contained in the collected dust was 0.92 μg/m 3 a few meters away from the extruder during the working processes (using elemental analysis). The maximum concentration measured using BCMs was shown to be seven times higher than the base concentration during the pelletizing process of polycarbonate (PC) and MWCNT composites. However, free, isolated, and unbound agglomerated MWCNTs were not detected using scanning electron microscopic (SEM) observation. The result obtained by elemental analysis indicated it was possible to quantify MWCNT in composites. The mean concentration at this factory was lower than the recommended exposure limit. However, additional studies during the pelletizing process are required in the future.

Power performance of nonisentropic Brayton cycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, C.; Kiang, R.L.

In this paper work and power optimization of a Brayton cycle are analyzed with a finite-time heat transfer analysis. This work extends the recent flurry of publications in heat engine efficiency under the maximum power condition by incorporating nonisentropic compression and expansion. As expected, these nonisentropic processes lower the power output as well as the cycle efficiency when compared with an endoreversible Brayton cycle under the same conditions.

The task of validation of gas-dynamic characteristics of a multistage centrifugal compressor for a natural gas booster compressor station

NASA Astrophysics Data System (ADS)

Danilishin, A. M.; Kozhukhov, Y. V.; Neverov, V. V.; Malev, K. G.; Mironov, Y. R.

2017-08-01

The aim of this work is the validation study for the numerical modeling of characteristics of a multistage centrifugal compressor for natural gas. In the research process was the analysis used grid interfaces and software systems. The result revealed discrepancies between the simulated and experimental characteristics and outlined the future work plan.

A model for prediction of profile and flatness of hot and cold rolled flat products in four-high mills

NASA Astrophysics Data System (ADS)

Overhagen, Christian; Mauk, Paul Josef

2018-05-01

For flat rolled products, the thickness profile in the transversal direction is one of the most important product properties. For further processing, a defined crown of the product is necessary. In the rolling process, several mechanical and thermal influences interact with each other to form the strip shape at the roll gap exit. In the present analysis, a process model for rolling of strip and sheet is presented. The core feature of the process model is a two-dimensional stress distribution model based on von Karman's differential equation. Sub models for the mechanical influences of work roll flattening as well as work and backup roll deflection and the thermal influence of work roll expansion have been developed or extended. The two-dimensional stress distribution serves as an input parameter for the roll deformation models. For work roll flattening, a three-dimensional model based on the Boussinesq problem is adopted, while the work and backup roll deflection, including contact flattening is calculated by means of finite beam elements. The thermal work roll crown is calculated with help of an axisymmetric numerical solution of the heat equation for the work roll, considering azimuthal averaging for the boundary conditions at the work roll surface. Results are presented for hot rolling of a strip in a seven-stand finishing train of a hot strip mill, showing the calculated evolution of the strip profile. A variation of the strip profile from the first to the 20th rolled strip is shown. This variation is addressed to the progressive increase of work roll temperature during the first 20 strips. It is shown that a CVC® system can lead to improvements in strip profile and therefore flatness.

Tool for Rapid Analysis of Monte Carlo Simulations

NASA Technical Reports Server (NTRS)

Restrepo, Carolina; McCall, Kurt E.; Hurtado, John E.

2011-01-01

Designing a spacecraft, or any other complex engineering system, requires extensive simulation and analysis work. Oftentimes, the large amounts of simulation data generated are very di cult and time consuming to analyze, with the added risk of overlooking potentially critical problems in the design. The authors have developed a generic data analysis tool that can quickly sort through large data sets and point an analyst to the areas in the data set that cause specific types of failures. The Tool for Rapid Analysis of Monte Carlo simulations (TRAM) has been used in recent design and analysis work for the Orion vehicle, greatly decreasing the time it takes to evaluate performance requirements. A previous version of this tool was developed to automatically identify driving design variables in Monte Carlo data sets. This paper describes a new, parallel version, of TRAM implemented on a graphical processing unit, and presents analysis results for NASA's Orion Monte Carlo data to demonstrate its capabilities.

Catalyst and process development for the H/sub 2/ preparation from future fuel cell feedstocks. Quarterly progress report, October 1, 1978-December 31, 1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yarrington, R M; Feins, I R; Hwang, H S

1979-01-01

The work done under this contract in the last quarter of 1978 was concerned with Phase I, which involved preliminary catalyst and process evaluation. The processes under study are hydrogen assisted steam reforming (HASR), catalytic partial oxidation (CPO), and autothermal steam reforming (ATR). Existing Engelhard test units were modified to carry out preliminary runs using the first two processes. Technical analysis to support work in this area consisted of heat and material balances constrained by equilibrium considerations. In a third task, the steam reforming of methanol to produce hydrogen was studied over two commercial low-temperature shift catalysts. Aging runs indicatedmore » good initial performance on both catalysts, but methanol conversion started to decline after a few hundred hours on stream.« less

The role of inhibition for working memory processes: ERP evidence from a short-term storage task.

PubMed

Getzmann, Stephan; Wascher, Edmund; Schneider, Daniel

2018-05-01

Human working memory is the central unit for short-term storage of information. In addition to the selection and adequate storage of relevant information, the suppression of irrelevant stimuli from the environment seems to be of importance for working memory processes. To learn more about the interplay of information uptake and inhibition of irrelevant information, the present study used ERP measures and a short-term storage and retrieval task, in which pairs of either numbers or letters had to be compared. Random sequences of four stimuli (two numbers and two letters) were presented, with either the numbers or the letters being relevant for comparison. The analysis of ERPs to each of the four stimuli indicated more pronounced P2 and P3b amplitudes for relevant than irrelevant stimuli. In contrast, the N2 (reflecting inhibitory control) was only elicited by irrelevant stimuli. Moreover, the N2 amplitude of the second irrelevant stimulus was associated with behavioral performance, indicating the importance of inhibition of task-irrelevant stimuli for working memory processes. In sum, the findings demonstrate the role of cognitive control mechanisms for protecting relevant contents in working memory against irrelevant information. © 2017 Society for Psychophysiological Research.

Chemical analysis of extracting transition metal oxides from polymetallic ore by sulphate process

NASA Astrophysics Data System (ADS)

Enkh-Uyanga, Otgon-Uul; Munkhtsetseg, Baatar; Urangoo, Urtnasan; Tserendulam, Enkhtur; Agiimaa, Davaadorj

2017-06-01

In this research work we attempt to improve the purity of polymetallic ores in Mongolia whilst developing practical applications of its refinement processes and this paper presents the results of chemical research of extracting transition metal titanium oxides, ferrous oxide and rare earth oxides from polymetallic ore. Thereby, chemical and mineral analysis of polymetallic ore is carried out basis of responses to the support process at various degrees of water whereas transition metal sulphates solubility differ. As a result of sulphate and resulphurization process we have extracted anatase with 62.5 percent titanium dioxide and brookite mineral with 89.6 percent of titanium dioxide as well as mineral with 83.8 percent of ferrous oxide hematite and rare earth oxides with 57.6 percent of cerium oxide. These oxides are identified under various conditions in the thermal processing. The morphology structure and chemical content compound of the mineral has been verified as a result of the XRF, XRD, SEM-EDX analysis.

Environmental impact assessment of european non-ferro mining industries through life-cycle assessment

NASA Astrophysics Data System (ADS)

Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

2018-05-01

European mining industries are the vast industrial sector which contributes largely on their economy which constitutes of ferro and non-ferro metals and minerals industries. The non-ferro metals extraction and processing industries require focus of attention due to sustainability concerns as their manufacturing processes are highly energy intensive and impacts globally on environment. This paper analyses major environmental effects caused by European metal industries based on the life-cycle impact analysis technologies. This research work is the first work in considering the comparative environmental impact analysis of European non-ferro metal industries which will reveal their technological similarities and dissimilarities to assess their environmental loads. The life-cycle inventory datasets are collected from the EcoInvent database while the analysis is done using the CML baseline and ReCipe endpoint method using SimaPro software version 8.4. The CML and ReCipe method are chosen because they are specialized impact assessment methods for European continent. The impact categories outlined for discussion here are human health, global warming and ecotoxicity. The analysis results reveal that the gold industry is vulnerable for the environment due to waste emission and similar result retained by silver mines a little bit. But copper, lead, manganese and zinc mining processes and industries are environment friendly in terms of metal extraction technologies and waste emissions.

Incorporating organisational safety culture within ergonomics practice.

PubMed

Bentley, Tim; Tappin, David

2010-10-01

This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

Computer-Aided Discovery Tools for Volcano Deformation Studies with InSAR and GPS

NASA Astrophysics Data System (ADS)

Pankratius, V.; Pilewskie, J.; Rude, C. M.; Li, J. D.; Gowanlock, M.; Bechor, N.; Herring, T.; Wauthier, C.

2016-12-01

We present a Computer-Aided Discovery approach that facilitates the cloud-scalable fusion of different data sources, such as GPS time series and Interferometric Synthetic Aperture Radar (InSAR), for the purpose of identifying the expansion centers and deformation styles of volcanoes. The tools currently developed at MIT allow the definition of alternatives for data processing pipelines that use various analysis algorithms. The Computer-Aided Discovery system automatically generates algorithmic and parameter variants to help researchers explore multidimensional data processing search spaces efficiently. We present first application examples of this technique using GPS data on volcanoes on the Aleutian Islands and work in progress on combined GPS and InSAR data in Hawaii. In the model search context, we also illustrate work in progress combining time series Principal Component Analysis with InSAR augmentation to constrain the space of possible model explanations on current empirical data sets and achieve a better identification of deformation patterns. This work is supported by NASA AIST-NNX15AG84G and NSF ACI-1442997 (PI: V. Pankratius).

[Working conditions of community nurses].

PubMed

Kułagowska, Ewa; Kosińska, Maria

2010-01-01

To ensure the most efficient workplace health promotion it is essential to identify and monitor health conditions of employees and all components of the work process, as well as to recognize their cause-effect relationships. Community nurses form an occupational group with a specific type of workplace that is usually located in the patient's place of residence and thus not inspected in terms of safety and hygiene. The aim of the study was to identify working conditions of community nurses with special reference to occupational hazards. An anonymous questionnaire was used as a major tool of this survey. It contained 33 questions, concerning the work process, working conditions, work loads and arduousness, hazards and work-related complaints. The questionnaire was completed by 86 community nurses working in the Upper Silesia region. Community nurses generally assessed their work as hard. A more thorough analysis revealed that nursing and curative care, nursing and hygienic care and rehabilitation were regarded by community nurses as hard, whereas social diagnostics and curative diagnostics were assessed as much easier tasks. Excessive physical load, forced position at work, aggressive patients, patients' aggressive family members, dangerous domestic animals, low quality of technical devices in patients' homes were reported as the greatest hazards. The obtained results reveal that working conditions of community nurses do not ensure their safety at work.

Survey process quality: a question of healthcare manager approach.

PubMed

Nilsson, Petra; Blomqvist, Kerstin

2017-08-14

Purpose The purpose of this paper is to explore how healthcare first-line managers think about and act regarding workplace survey processes. Design/methodology/approach This interview study was performed at a hospital in south Sweden. First-line healthcare managers ( n=24) volunteered. The analysis was inspired by phenomenography, which aims to describe the ways in which different people experience a phenomenon. The phenomenon was a workplace health promotion (WHP) survey processes. Findings Four main WHP survey process approaches were identified among the managers: as a possibility, as a competition, as a work task among others and as an imposition. For each, three common subcategories emerged; how managers: stated challenges and support from hospital management; described their own work group and collaboration with other managers; and expressed themselves and their situation in their roles as first-line managers. Practical implications Insights into how hospital management can understand their first-line managers' motivation for survey processes and practical suggestions and how managers can work proactively at organizational, group and individual level are presented. Originality/value Usually these studies focus on those who should respond to a survey; not those who should run the survey process. Focusing on managers and not co-workers can lead to more committed and empowered managers and thereby success in survey processes.

The Principles of Designing an Expert System in Teaching Mathematics

ERIC Educational Resources Information Center

Salekhova, Lailya; Nurgaliev, Albert; Zaripova, Rinata; Khakimullina, Nailya

2013-01-01

This study reveals general didactic concepts of the Expert Systems (ES) development process in the educational area. The proof of concept is based on the example of teaching the 8th grade Algebra subject. The main contribution in this work is the implementation of innovative approaches in analysis and processing of data by expert system as well as…

How Authors Did It--A Methodological Analysis of Recent Engineering Education Research Papers in the European Journal of Engineering Education

ERIC Educational Resources Information Center

Malmi, Lauri; Adawi, Tom; Curmi, Ronald; de Graaff, Erik; Duffy, Gavin; Kautz, Christian; Kinnunen, Päivi; Williams, Bill

2018-01-01

We investigated research processes applied in recent publications in the "European Journal of Engineering Education" (EJEE), exploring how papers link to theoretical work and how research processes have been designed and reported. We analysed all 155 papers published in EJEE in 2009, 2010 and 2013, classifying the papers using a taxonomy…

Determination of Surface Tension of Surfactant Solutions through Capillary Rise Measurements: An Image-Processing Undergraduate Laboratory Experiment

ERIC Educational Resources Information Center

Huck-Iriart, Cristia´n; De-Candia, Ariel; Rodriguez, Javier; Rinaldi, Carlos

2016-01-01

In this work, we described an image processing procedure for the measurement of surface tension of the air-liquid interface using isothermal capillary action. The experiment, designed for an undergraduate course, is based on the analysis of a series of solutions with diverse surfactant concentrations at different ionic strengths. The objective of…

Carl Rogers' Responses in the 17th Session with Miss Mun: Comments from a Process-Experiential and Psychoanalytic Perspective.

ERIC Educational Resources Information Center

Gundrum, Monica; Lietaer, Germain; Van Hees-Matthijssen, Christiane

1999-01-01

Reproduces the transcript of one of Carl Rogers' filmed therapeutic sessions with Miss Mun, followed by an empirical and clinical-qualitative analysis. Five task oriented processes are examined in detail: the evocative impact of reflections of feeling; empathic affirmation as a marker of intense vulnerability; focusing reflections; working with…

Using High Performance Computing to Examine the Processes of Neurogenesis Underlying Pattern Separation/Completion of Episodic Information.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aimone, James Bradley; Betty, Rita

Using High Performance Computing to Examine the Processes of Neurogenesis Underlying Pattern Separation/Completion of Episodic Information - Sandia researchers developed novel methods and metrics for studying the computational function of neurogenesis, thus generating substantial impact to the neuroscience and neural computing communities. This work could benefit applications in machine learning and other analysis activities.

Uncovering Procedural Knowledge in Craft, Design, and Technology Education: A Case of Hands-On Activities in Electronics

ERIC Educational Resources Information Center

Pirttimaa, Matti; Husu, Jukka; Metsärinne, Mika

2017-01-01

Different knowledge types have their own specific features and tasks in the learning process. Procedural knowledge is used in craft and technology education when students solve problems individually and share their working knowledge with others. This study presents a detailed analysis of a one student's learning process in technology education and…

The Comparison of VLBI Data Analysis Using Software Globl and Globk

NASA Astrophysics Data System (ADS)

Guangli, W.; Xiaoya, W.; Jinling, L.; Wenyao, Z.

The comparison of different geodetic data analysis software is one of the quite of- ten mentioned topics. In this paper we try to find out the difference between software GLOBL and GLOBK when use them to process the same set of VLBI data. GLOBL is a software developed by VLBI team, geodesy branch, GSFC/NASA to process geode- tic VLBI data using algorithm of arc-parameter-elimination, while GLOBK using al- gorithm of kalman filtering is mainly used in GPS data analysis, and it is also used in VLBI data analysis. Our work focus on whether there are significant difference when use the two softwares to analyze the same VLBI data set and investigate the reasons caused the difference.

Automating expert role to determine design concept in Kansei Engineering

NASA Astrophysics Data System (ADS)

Lokman, Anitawati Mohd; Haron, Mohammad Bakri Che; Abidin, Siti Zaleha Zainal; Khalid, Noor Elaiza Abd

2016-02-01

Affect has become imperative in product quality. In affective design field, Kansei Engineering (KE) has been recognized as a technology that enables discovery of consumer's emotion and formulation of guide to design products that win consumers in the competitive market. Albeit powerful technology, there is no rule of thumb in its analysis and interpretation process. KE expertise is required to determine sets of related Kansei and the significant concept of emotion. Many research endeavors become handicapped with the limited number of available and accessible KE experts. This work is performed to simulate the role of experts with the use of Natphoric algorithm thus providing sound solution to the complexity and flexibility in KE. The algorithm is designed to learn the process by implementing training datasets taken from previous KE research works. A framework for automated KE is then designed to realize the development of automated KE system. A comparative analysis is performed to determine feasibility of the developed prototype to automate the process. The result shows that the significant Kansei is determined by manual KE implementation and the automated process is highly similar. KE research advocates will benefit this system to automatically determine significant design concepts.

Determinants of job stress in chemical process industry: A factor analysis approach.

PubMed

Menon, Balagopal G; Praveensal, C J; Madhu, G

2015-01-01

Job stress is one of the active research domains in industrial safety research. The job stress can result in accidents and health related issues in workers in chemical process industries. Hence it is important to measure the level of job stress in workers so as to mitigate the same to avoid the worker's safety related problems in the industries. The objective of this study is to determine the job stress factors in the chemical process industry in Kerala state, India. This study also aims to propose a comprehensive model and an instrument framework for measuring job stress levels in the chemical process industries in Kerala, India. The data is collected through a questionnaire survey conducted in chemical process industries in Kerala. The collected data out of 1197 surveys is subjected to principal component and confirmatory factor analysis to develop the job stress factor structure. The factor analysis revealed 8 factors that influence the job stress in process industries. It is also found that the job stress in employees is most influenced by role ambiguity and the least by work environment. The study has developed an instrument framework towards measuring job stress utilizing exploratory factor analysis and structural equation modeling.

Integrated electrocoagulation-electrooxidation process for the treatment of soluble coffee effluent: Optimization of COD degradation and operation time analysis.

PubMed

Ibarra-Taquez, Harold N; GilPavas, Edison; Blatchley, Ernest R; Gómez-García, Miguel-Ángel; Dobrosz-Gómez, Izabela

2017-09-15

Soluble coffee production generates wastewater containing complex mixtures of organic macromolecules. In this work, a sequential Electrocoagulation-Electrooxidation (EC-EO) process, using aluminum and graphite electrodes, was proposed as an alternative way for the treatment of soluble coffee effluent. Process operational parameters were optimized, achieving total decolorization, as well as 74% and 63.5% of COD and TOC removal, respectively. The integrated EC-EO process yielded a highly oxidized (AOS = 1.629) and biocompatible (BOD 5 /COD ≈ 0.6) effluent. The Molecular Weight Distribution (MWD) analysis showed that during the EC-EO process, EC effectively decomposed contaminants with molecular weight in the range of 10-30 kDa. In contrast, EO was quite efficient in mineralization of contaminants with molecular weight higher than 30 kDa. A kinetic analysis allowed determination of the time required to meet Colombian permissible discharge limits. Finally, a comprehensive operational cost analysis was performed. The integrated EC-EO process was demonstrated as an efficient alternative for the treatment of industrial effluents resulting from soluble coffee production. Copyright © 2017 Elsevier Ltd. All rights reserved.

Application of the OCRA Method in the sugar cane harvest and its repercussion on the workers' health. Preliminary study.

PubMed

Ruddy, Facci; Eduardo, Marcatto; Edoardo, Santino

2012-01-01

In Brazil the sugar ethanol industry has had strong growth in the last 10 years, sometimes due to the growing sugar exportation, sometimes due to the alcohol production for automobile fuel and for exportation. Despite the growing mechanization of the raw material harvest (sugar cane), the manual work still persists. The development of this article was based in the application of the OCRA Method in the sugar cane harvesting process, to evaluate the risks to the upper limbs by repetitive movements and epidemiologically prove the ratio risk x harm to the heath of the workers, as well as the probability of developing improvements in the working conditions. The analysis process consists of studying the work organization, the risks to the health of the worker and the distribution of the recovery periods during the working day.

Employment Maintenance and Intimate Partner Violence.

PubMed

Borchers, Andrea; Lee, Rebecca C; Martsolf, Donna S; Maler, Jeff

2016-05-18

Intimate partner violence (IPV) is a major public health problem in the United States. Negative outcomes of IPV affect women's attainment and maintenance of employment. The purpose of this study was to develop a theoretical framework that described and explained the process by which women who have experienced IPV attain and maintain employment. Grounded theory methodology was used to analyze interviews of 34 women who had experienced IPV. Analysis suggested that women who had experienced IPV could attain employment; however, they had difficulty maintaining employment. Entanglement of work and IPV was experienced by all 34 participants because of the perpetrator controlling their appearance, sabotaging their work, interfering with their work, or controlling their finances. Some women described ways in which they disentangled work from IPV through a dynamic unraveling process, with periods of re-entanglement, resulting in job security and satisfaction. © 2016 The Author(s).

Prediction of interface residue based on the features of residue interaction network.

PubMed

Jiao, Xiong; Ranganathan, Shoba

2017-11-07

Protein-protein interaction plays a crucial role in the cellular biological processes. Interface prediction can improve our understanding of the molecular mechanisms of the related processes and functions. In this work, we propose a classification method to recognize the interface residue based on the features of a weighted residue interaction network. The random forest algorithm is used for the prediction and 16 network parameters and the B-factor are acting as the element of the input feature vector. Compared with other similar work, the method is feasible and effective. The relative importance of these features also be analyzed to identify the key feature for the prediction. Some biological meaning of the important feature is explained. The results of this work can be used for the related work about the structure-function relationship analysis via a residue interaction network model. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analyzing the Evolution of Membrane Fouling via a Novel Method Based on 3D Optical Coherence Tomography Imaging.

PubMed

Li, Weiyi; Liu, Xin; Wang, Yi-Ning; Chong, Tzyy Haur; Tang, Chuyang Y; Fane, Anthony G

2016-07-05

The development of novel tools for studying the fouling behavior during membrane processes is critical. This work explored optical coherence tomography (OCT) to quantitatively interpret the formation of a cake layer during a membrane process; the quantitative analysis was based on a novel image processing method that was able to precisely resolve the 3D structure of the cake layer on a micrometer scale. Fouling experiments were carried out with foulants having different physicochemical characteristics (silica nanoparticles and bentonite particles). The cake layers formed at a series of times were digitalized using the OCT-based characterization. The specific deposit (cake volume/membrane surface area) and surface coverage were evaluated as a function of time, which for the first time provided direct experimental evidence for the transition of various fouling mechanisms. Axial stripes were observed in the grayscale plots showing the deposit distribution in the scanned area; this interesting observation was in agreement with the instability analysis that correlated the polarized particle groups with the small disturbances in the boundary layer. This work confirms that the OCT-based characterization is able to provide deep insights into membrane fouling processes and offers a powerful tool for exploring membrane processes with enhanced performance.

Innovation leading the way: application of lean manufacturing to sample management.

PubMed

Allen, M; Wigglesworth, M J

2009-06-01

Historically, sample management successfully focused on providing compound quality and tracking distribution within a diverse geographic. However, if a competitive advantage is to be delivered in a changing environment of outsourcing, efficiency and customer service must now improve or face reconstruction. The authors have used discrete event simulation to model the compound process from chemistry to assay and applied lean manufacturing techniques to analyze and improve these processes. In doing so, they identified a value-adding process time of just 11 min within a procedure that took days. Modeling also allowed the analysis of equipment and human resources necessary to complete the expected demand in an acceptable cycle time. Layout and location of sample management and screening departments are key in allowing process integration, creating rapid flow of work, and delivering these efficiencies. Following this analysis and minor process changes, the authors have demonstrated for 2 programs that solid compounds can be converted to assay-ready plates in less than 4 h. In addition, it is now possible to deliver assay data from these compounds within the same working day, allowing chemistry teams more flexibility and more time to execute the next chemistry round. Additional application of lean manufacturing principles has the potential to further decrease cycle times while using fewer resources.

The representations of work-life balance in Canadian newspapers.

PubMed

Reece, Katherine T; Davis, Jane A; Polatajko, Helene J

2009-01-01

Work-life balance has become a topic of increasing interest in the media as well as a concern among working Canadians. Since print media discourse can both reflect and shape societal values, cultural norms and ideals of workers in this country, it is important to understand this representation and its potential influence on the occupational engagement and life transitions of Canadian workers. Articles from four major Canadian newspapers published between 2003 and 2005 were used as data sources to examine the media construction of "work-life balance". Thematic analysis of 100 articles was performed using a modified affinity diagramming process. Representations within the Canadian print media conveyed both themes pertaining to the perceived experiences of imbalance and balance, as well as, a process of life balance. Obtaining balance was portrayed as an ongoing process during which an individual negotiates and sacrifices in an attempt to achieve his or her ideal level of balance. Environmental expectations and individual practices and perceptions were conveyed as reasons for the success or derailment of balance. The representations of work-life balance found in the Canadian print media were predominantly of professionals, focused on the demands of work and family, and did not appear to be a broad representation of the multiple realities that all Canadians face.

Factors promoting a successful return to work: from an employer and employee perspective.

PubMed

Jakobsen, Klara; Lillefjell, Monica

2014-01-01

Efforts have been made to explain the inability to return to work (RTW) due to employees' chronic musculoskeletal pain. Knowledge of factors facilitating the RTW process is however still limited. Based on the experiences of employees and employers, this study aims to identify factors promoting a successful return process for persons with chronic musculoskeletal pain. The findings from interviews, involving six employees with musculoskeletal pain, and five employers with various work experience, were analysed by Giorgi's phenomenological analysis through four stages. The major themes underlying the employees' comments for a successful RTW were identifying and mobilizing their personal resources, adapting a balanced daily life, and requiring a positive dialogue with family and their employer, while the employers underlined the need for a helpful adjustment at work and how they wanted to become more involved in the rehabilitation process. In conclusion our findings underline the need for extended collaboration between the employees, employer, and rehabilitation staff, and should encourage occupational therapists to direct even more of their expertise towards the situation at the workplace.

[Work process in Family Health Program: the potential of subjectivity of care for reconfiguration of the care model].

PubMed

Santos, Debora de Souza; Mishima, Silvana Martins; Merhy, Emerson Elias

2018-03-01

This is a study with a qualitative approach that aims to analyze the subjective dimension of the Family Health teams' practices conducted in order to reconfigure the care model, using the work process in health as the fundamental analytical category from the Marxist standpoint. The data gathering tool used was the focus group, applied in 13 Family Health teams in Maceió, Alagoas. Thematic analysis combined with principles of hermeneutics and dialectics was used for treatment and interpretation of the data. The results indicate that the user´s needs identified by the teams are multiple and permeated by a lack of sympathetic care, and that the user repeatedly wishes to be "heard." The teams show that they are open to the use of soft technologies of compassionate care, although they do not legitimate them as instruments of their work. Clinical knowledge and techniques are prioritized in the work process, which limits the potential of its subjective dimension in order to (re)configure a care model which attends the user´s needs and is sustained by integrated care.

Nurses' professionalism in Canada: a labor process analysis.

PubMed

Campbell, M L

1992-01-01

This article draws on a body of research conducted by the author over the past ten years on the social organization of nursing work. It explores questions surrounding nurses' contemporary labor process control and its meaning for nurses' professionalization and proletarianization. Both are dynamic processes, changing as public administration of the Canadian health care system changes and as nurses are successful in winning more complete self-regulation. Nurses are currently being articulated more and more securely to dominant ideas of public sector management through textually mediated technologies. Nurses find new upwardly mobile careers and challenging, responsible, and more respected work. However, as the generation of objective information for professional accountability, cost-accounting, and managerial decision-making becomes unified in computerized patient information systems, producing and using such information becomes a central and determining core of everyday nursing work. It organizes nurses into a "managed" practice of patient care, contradictory for them in many ways. Outstanding among these contradictions is a new professionalized standpoint of cost-efficiency that subordinates nurses' traditional interests and grounding of their work in the standpoint of care.

Object selection costs in visual working memory: A diffusion model analysis of the focus of attention.

PubMed

Sewell, David K; Lilburn, Simon D; Smith, Philip L

2016-11-01

A central question in working memory research concerns the degree to which information in working memory is accessible to other cognitive processes (e.g., decision-making). Theories assuming that the focus of attention can only store a single object at a time require the focus to orient to a target representation before further processing can occur. The need to orient the focus of attention implies that single-object accounts typically predict response time costs associated with object selection even when working memory is not full (i.e., memory load is less than 4 items). For other theories that assume storage of multiple items in the focus of attention, predictions depend on specific assumptions about the way resources are allocated among items held in the focus, and how this affects the time course of retrieval of items from the focus. These broad theoretical accounts have been difficult to distinguish because conventional analyses fail to separate components of empirical response times related to decision-making from components related to selection and retrieval processes associated with accessing information in working memory. To better distinguish these response time components from one another, we analyze data from a probed visual working memory task using extensions of the diffusion decision model. Analysis of model parameters revealed that increases in memory load resulted in (a) reductions in the quality of the underlying stimulus representations in a manner consistent with a sample size model of visual working memory capacity and (b) systematic increases in the time needed to selectively access a probed representation in memory. The results are consistent with single-object theories of the focus of attention. The results are also consistent with a subset of theories that assume a multiobject focus of attention in which resource allocation diminishes both the quality and accessibility of the underlying representations. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Some reciprocal roles between behavior analysis and institutional economics in post-darwinian science

PubMed Central

Glenn, Sigrid S.

1985-01-01

Behavior analysis and institutional economics are viewed as having common origins in the early 20th century effort to benefit from the conceptual revolution spurred by Darwin's synthesis. Institutional economics, initiated by Thorstein Veblen, appears to have failed to develop a progressive scientific technology, while behavior analysis has done so. It is suggested that institutional economics has been held back by lack of a synthesizing scientific mechanism that elucidates the relation between technological and ceremonial processes, the two cultural forces described by Veblen. The theory of institutional economist C. E. Ayres, built on Veblen's distinction, is used to clarify the concepts of technological and ceremonial processes for the reader. An analysis of the behavioral processes that might underlie the cultural processes described by Veblen/Ayres suggests that the experimental analysis of behavior has provided concepts that might function as a synthesizing mechanism for the social sciences and, in particular, institutional economics. The Veblen/Ayres dichotomy, now seen in terms of underlying behavioral processes, is used to examine the field of behavior analysis in terms of its origins, its relation to psychology and its current state. The paper concludes with a few practical suggestions as to how behavior analysts might work to enhance survival. PMID:22478617

Aeroelastic optimization methodology for viscous and turbulent flows

NASA Astrophysics Data System (ADS)

Barcelos Junior, Manuel Nascimento Dias

2007-12-01

In recent years, the development of faster computers and parallel processing allowed the application of high-fidelity analysis methods to the aeroelastic design of aircraft. However, these methods are restricted to the final design verification, mainly due to the computational cost involved in iterative design processes. Therefore, this work is concerned with the creation of a robust and efficient aeroelastic optimization methodology for inviscid, viscous and turbulent flows by using high-fidelity analysis and sensitivity analysis techniques. Most of the research in aeroelastic optimization, for practical reasons, treat the aeroelastic system as a quasi-static inviscid problem. In this work, as a first step toward the creation of a more complete aeroelastic optimization methodology for realistic problems, an analytical sensitivity computation technique was developed and tested for quasi-static aeroelastic viscous and turbulent flow configurations. Viscous and turbulent effects are included by using an averaged discretization of the Navier-Stokes equations, coupled with an eddy viscosity turbulence model. For quasi-static aeroelastic problems, the traditional staggered solution strategy has unsatisfactory performance when applied to cases where there is a strong fluid-structure coupling. Consequently, this work also proposes a solution methodology for aeroelastic and sensitivity analyses of quasi-static problems, which is based on the fixed point of an iterative nonlinear block Gauss-Seidel scheme. The methodology can also be interpreted as the solution of the Schur complement of the aeroelastic and sensitivity analyses linearized systems of equations. The methodologies developed in this work are tested and verified by using realistic aeroelastic systems.

[State Recognition of Solid Fermentation Process Based on Near Infrared Spectroscopy with Adaboost and Spectral Regression Discriminant Analysis].

PubMed

Yu, Shuang; Liu, Guo-hai; Xia, Rong-sheng; Jiang, Hui

2016-01-01

In order to achieve the rapid monitoring of process state of solid state fermentation (SSF), this study attempted to qualitative identification of process state of SSF of feed protein by use of Fourier transform near infrared (FT-NIR) spectroscopy analysis technique. Even more specifically, the FT-NIR spectroscopy combined with Adaboost-SRDA-NN integrated learning algorithm as an ideal analysis tool was used to accurately and rapidly monitor chemical and physical changes in SSF of feed protein without the need for chemical analysis. Firstly, the raw spectra of all the 140 fermentation samples obtained were collected by use of Fourier transform near infrared spectrometer (Antaris II), and the raw spectra obtained were preprocessed by use of standard normal variate transformation (SNV) spectral preprocessing algorithm. Thereafter, the characteristic information of the preprocessed spectra was extracted by use of spectral regression discriminant analysis (SRDA). Finally, nearest neighbors (NN) algorithm as a basic classifier was selected and building state recognition model to identify different fermentation samples in the validation set. Experimental results showed as follows: the SRDA-NN model revealed its superior performance by compared with other two different NN models, which were developed by use of the feature information form principal component analysis (PCA) and linear discriminant analysis (LDA), and the correct recognition rate of SRDA-NN model achieved 94.28% in the validation set. In this work, in order to further improve the recognition accuracy of the final model, Adaboost-SRDA-NN ensemble learning algorithm was proposed by integrated the Adaboost and SRDA-NN methods, and the presented algorithm was used to construct the online monitoring model of process state of SSF of feed protein. Experimental results showed as follows: the prediction performance of SRDA-NN model has been further enhanced by use of Adaboost lifting algorithm, and the correct recognition rate of the Adaboost-SRDA-NN model achieved 100% in the validation set. The overall results demonstrate that SRDA algorithm can effectively achieve the spectral feature information extraction to the spectral dimension reduction in model calibration process of qualitative analysis of NIR spectroscopy. In addition, the Adaboost lifting algorithm can improve the classification accuracy of the final model. The results obtained in this work can provide research foundation for developing online monitoring instruments for the monitoring of SSF process.

Methods for evaluating a mature substance abuse prevention/early intervention program.

PubMed

Becker, L R; Hall, M; Fisher, D A; Miller, T R

2000-05-01

The authors describe methods for work in progress to evaluate four workplace prevention and/or early intervention programs designed to change occupational norms and reduce substance abuse at a major U.S. transportation company. The four programs are an employee assistance program, random drug testing, managed behavioral health care, and a peer-led intervention program. An elaborate mixed-methods evaluation combines data collection and analysis techniques from several traditions. A process-improvement evaluation focuses on the peer-led component to describe its evolution, document the implementation process for those interested in replicating it, and provide information for program improvement. An outcome-assessment evaluation examines impacts of the four programs on job performance measures (e.g., absenteeism, turnover, injury, and disability rates) and includes a cost-offset and employer cost-savings analysis. Issues related to using archival data, combining qualitative and quantitative designs, and working in a corporate environment are discussed.

Structural optimization of Beach-Cleaner snatch mechanism

NASA Astrophysics Data System (ADS)

Ouyang, Lian-ge; Wei, Qin-rui; Zhou, Shui-ting; Peng, Qian; Zhao, Yuan-jiang; Wang, Fang

2017-12-01

In the working process of one Beach-Cleaner snatch institution, the second knuckle arm angular speed was too high, which resulted in the pick-up device would crash into the basic arm in the fold process. The rational position of joint to reduce the second knuckle arm angular speed and the force along the axis direction of the most dangerous point can be obtained from the kinematics simulation of snatch institution in the code of Automatic Dynamic Analysis off Mechanical Systems (ADAAMS). The feasible of scheme was validated by analyzing the optimized model in the software of ANSYS. The analysis results revealed: the open angle between the basic arm and the second knuckle arm improved from 125.0° too 135.24°, thee second knuckle arm angular speed decreased from 990.74rad/s to 58.53 rad/s, Not only improved work efficiency of snatch institution, but also prolonged its operation smoothness.

A queueing theory based model for business continuity in hospitals.

PubMed

Miniati, R; Cecconi, G; Dori, F; Frosini, F; Iadanza, E; Biffi Gentili, G; Niccolini, F; Gusinu, R

2013-01-01

Clinical activities can be seen as results of precise and defined events' succession where every single phase is characterized by a waiting time which includes working duration and possible delay. Technology makes part of this process. For a proper business continuity management, planning the minimum number of devices according to the working load only is not enough. A risk analysis on the whole process should be carried out in order to define which interventions and extra purchase have to be made. Markov models and reliability engineering approaches can be used for evaluating the possible interventions and to protect the whole system from technology failures. The following paper reports a case study on the application of the proposed integrated model, including risk analysis approach and queuing theory model, for defining the proper number of device which are essential to guarantee medical activity and comply the business continuity management requirements in hospitals.

Transformism in Alberta: The Environmental Political Economy of the Bituminous Sands

NASA Astrophysics Data System (ADS)

Katz-Rosene, Ryan

This thesis attempts to help establish environmental political economy as a viable academic field while providing an example of work in the discipline. It offers an analysis of societal processes resulting in the co-optation and/or neutralization of critical environmentalist ideas. Using Alberta's bituminous sands as a case study, and a Gramsci-influenced eco-Marxist theory as a foundation, the thesis argues that the term 'environmental transformism' (inspired by the Gramscian term trasformismo) is helpful in describing and framing such processes. Accordingly, the ensuing chapters provide an analysis of why environmental transformism is happening in Alberta, and demonstrate how this mechanism works at protecting the status quo from threatening ideologies, thereby consolidating neoliberal capitalism. A concluding argument discusses the inherent dangers posed to society by the transformism of certain environmental subjectivities. The thesis begins by introducing the contentious social and environmental issues surrounding the development of the bituminous sands.

Video Analysis and Remote Digital Ethnography: Approaches to understanding user perspectives and processes involving healthcare information technology.

PubMed

Kushniruk, Andre W; Borycki, Elizabeth M

2015-01-01

Innovations in healthcare information systems promise to revolutionize and streamline healthcare processes worldwide. However, the complexity of these systems and the need to better understand issues related to human-computer interaction have slowed progress in this area. In this chapter the authors describe their work in using methods adapted from usability engineering, video ethnography and analysis of digital log files for improving our understanding of complex real-world healthcare interactions between humans and technology. The approaches taken are cost-effective and practical and can provide detailed ethnographic data on issues health professionals and consumers encounter while using systems as well as potential safety problems. The work is important in that it can be used in techno-anthropology to characterize complex user interactions with technologies and also to provide feedback into redesign and optimization of improved healthcare information systems.

The contribution of visual processing to academic achievement in adolescents born extremely preterm or extremely low birth weight.

PubMed

Molloy, Carly S; Di Battista, Ashley M; Anderson, Vicki A; Burnett, Alice; Lee, Katherine J; Roberts, Gehan; Cheong, Jeanie Ly; Anderson, Peter J; Doyle, Lex W

2017-04-01

Children born extremely preterm (EP, <28 weeks) and/or extremely low birth weight (ELBW, <1000 g) have more academic deficiencies than their term-born peers, which may be due to problems with visual processing. The aim of this study is to determine (1) if visual processing is related to poor academic outcomes in EP/ELBW adolescents, and (2) how much of the variance in academic achievement in EP/ELBW adolescents is explained by visual processing ability after controlling for perinatal risk factors and other known contributors to academic performance, particularly attention and working memory. A geographically determined cohort of 228 surviving EP/ELBW adolescents (mean age 17 years) was studied. The relationships between measures of visual processing (visual acuity, binocular stereopsis, eye convergence, and visual perception) and academic achievement were explored within the EP/ELBW group. Analyses were repeated controlling for perinatal and social risk, and measures of attention and working memory. It was found that visual acuity, convergence and visual perception are related to scores for academic achievement on univariable regression analyses. After controlling for potential confounds (perinatal and social risk, working memory and attention), visual acuity, convergence and visual perception remained associated with reading and math computation, but only convergence and visual perception are related to spelling. The additional variance explained by visual processing is up to 6.6% for reading, 2.7% for spelling, and 2.2% for math computation. None of the visual processing variables or visual motor integration are associated with handwriting on multivariable analysis. Working memory is generally a stronger predictor of reading, spelling, and math computation than visual processing. It was concluded that visual processing difficulties are significantly related to academic outcomes in EP/ELBW adolescents; therefore, specific attention should be paid to academic remediation strategies incorporating the management of working memory and visual processing in EP/ELBW children.

Open web system of Virtual labs for nuclear and applied physics

NASA Astrophysics Data System (ADS)

Saldikov, I. S.; Afanasyev, V. V.; Petrov, V. I.; Ternovykh, M. Yu

2017-01-01

An example of virtual lab work on unique experimental equipment is presented. The virtual lab work is software based on a model of real equipment. Virtual labs can be used for educational process in nuclear safety and analysis field. As an example it includes the virtual lab called “Experimental determination of the material parameter depending on the pitch of a uranium-water lattice”. This paper included general description of this lab. A description of a database on the support of laboratory work on unique experimental equipment which is included this work, its concept development are also presented.

Comparison of unusual carbon-based working electrodes for electrochemiluminescence sensors.

PubMed

Noman, Muhammad; Sanginario, Alessandro; Jagadale, Pravin; Demarchi, Danilo; Tagliaferro, Alberto

2017-06-01

In this work, unconventional carbon-based materials were investigated for use in electrochemiluminescence (ECL) working electrodes. Precursors such as bamboo, pistachio shells, kevlar ® fibers and camphor were differently treated and used as working electrodes in ECL experiments. After a proper process they were assembled as electrodes and tested in an electrochemical cell. Comparison among them and with a commercial glassy carbon electrode (GCE) shows a very good response for all of them thus demonstrating their potential use as disposable low-cost electrodes for early detection electrochemical analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

Family therapy process - works on the Polish version of SCORE-15 tool.

PubMed

Józefik, Barbara; Matusiak, Feliks; Wolska, Małgorzata; Ulasińska, Romualda

2016-01-01

The aim of the paper is to demonstrate progress of the works on the Polish version of SCORE-15 and the results of the preliminary data analysis of changes in the process of family therapy, obtained with this tool. The works on the Polish version, ongoing since 2010, were inspired by the Research Committee European Family Therapy Association EFTA. Since the Polish version of SCORE-15 will be make public and published on EFTA website in the near future, therefore, it is important that people interested in the tool know the context of its development. The Polish version of SCORE-15, the tool designed to examine the process of family therapy, was used. The comparison of the results obtained by family members before the first family session and before the fourth one and psychotherapists' assessments show that the perception of the weight of the problem with which the family members came to therapy is indeed significantly lower already after three sessions of family therapy. Additionally, the obtained results show great coherence of the assessment of the family therapy progress in families and their therapists. The preliminary analysis of data obtained during the research project conducted in Outpatient Family Therapy Clinic, Department of Adult, Child and Adolescent Psychiatry, University Hospital in Krakow and in Laboratory of Psychology and Systemic Psychotherapy, Department of Child and Adolescent Psychiatry, Jagiellonian University Medical College between 2010 and 2014 revealed that SCORE-15 is a useful tool in research on changes in the systemic family therapy process.

Return to work following breast cancer treatment: the employers' side.

PubMed

Tiedtke, Corine; Donceel, Peter; de Rijk, Angelique; Dierckx de Casterlé, Bernadette

2014-09-01

Research on employers' experiences with return to work (RTW) of employees with breast cancer is lacking. Employers seem to be the key people to create good working conditions. Our aim is to explore how Belgian employers experience their role and responsibility in RTW of employees with breast cancer. Using a qualitative design (Grounded Theory) 17 employers from the public (7), private (5) and non-profit (5) sector, directly involved in the RTW process, were interviewed. The analysis was based on the Qualitative Analysis Guide of Leuven (QUAGOL) with constant data comparison and interactive team dialogue as important guiding characteristics. RTW of employees with breast cancer is experienced by employers as an intangible process that is difficult to manage. This was expressed in (1) concern, referring to the employer's personal and emotional involvement, (2) uncertainty about the course of illness and the guidance needed by the employee and (3) specific dilemmas in the RTW process (when does one infringe on employee privacy; employee vs. organization interest; employers' personal vs. professional role). The degree to which this was experienced related to variety in organizational, employer, and employee factors. The findings of this study confirm the importance of the employer's involvement in RTW of employees with breast cancer and contribute to a better understanding of its complexity. The employers did their best to grasp the intangibility of the RTW process. Further research is needed to refine these findings and to discover the specific needs of employers regarding supporting RTW of breast cancer patients.

Application of fuzzy neural network technologies in management of transport and logistics processes in Arctic

NASA Astrophysics Data System (ADS)

Levchenko, N. G.; Glushkov, S. V.; Sobolevskaya, E. Yu; Orlov, A. P.

2018-05-01

The method of modeling the transport and logistics process using fuzzy neural network technologies has been considered. The analysis of the implemented fuzzy neural network model of the information management system of transnational multimodal transportation of the process showed the expediency of applying this method to the management of transport and logistics processes in the Arctic and Subarctic conditions. The modular architecture of this model can be expanded by incorporating additional modules, since the working conditions in the Arctic and the subarctic themselves will present more and more realistic tasks. The architecture allows increasing the information management system, without affecting the system or the method itself. The model has a wide range of application possibilities, including: analysis of the situation and behavior of interacting elements; dynamic monitoring and diagnostics of management processes; simulation of real events and processes; prediction and prevention of critical situations.

Working memory load modulation of parieto-frontal connections: evidence from dynamic causal modeling

PubMed Central

Ma, Liangsuo; Steinberg, Joel L.; Hasan, Khader M.; Narayana, Ponnada A.; Kramer, Larry A.; Moeller, F. Gerard

2011-01-01

Previous neuroimaging studies have shown that working memory load has marked effects on regional neural activation. However, the mechanism through which working memory load modulates brain connectivity is still unclear. In this study, this issue was addressed using dynamic causal modeling (DCM) based on functional magnetic resonance imaging (fMRI) data. Eighteen normal healthy subjects were scanned while they performed a working memory task with variable memory load, as parameterized by two levels of memory delay and three levels of digit load (number of digits presented in each visual stimulus). Eight regions of interest, i.e., bilateral middle frontal gyrus (MFG), anterior cingulate cortex (ACC), inferior frontal cortex (IFC), and posterior parietal cortex (PPC), were chosen for DCM analyses. Analysis of the behavioral data during the fMRI scan revealed that accuracy decreased as digit load increased. Bayesian inference on model structure indicated that a bilinear DCM in which memory delay was the driving input to bilateral PPC and in which digit load modulated several parieto-frontal connections was the optimal model. Analysis of model parameters showed that higher digit load enhanced connection from L PPC to L IFC, and lower digit load inhibited connection from R PPC to L ACC. These findings suggest that working memory load modulates brain connectivity in a parieto-frontal network, and may reflect altered neuronal processes, e.g., information processing or error monitoring, with the change in working memory load. PMID:21692148

Politics, policies and processes: a multidisciplinary and multimethods research programme on policies on the social determinants of health inequity in Australia

PubMed Central

Baum, Fran; Friel, Sharon

2017-01-01

Introduction The development and implementation of multisectoral policy to improve health and reduce health inequities has been slow and uneven. Evidence is largely focused on the facts of health inequities rather than understanding the political and policy processes. This 5-year funded programme of research investigates how these processes could function more effectively to improve equitable population health. Methods and analysis The programme of work is organised in four work packages using four themes (macroeconomics and infrastructure, land use and urban environments, health systems and racism) related to the structural drivers shaping the distribution of power, money and resources and daily living conditions. Policy case studies will use publicly available documents (policy documents, published evaluations, media coverage) and interviews with informants (policy-makers, former politicians, civil society, private sector) (~25 per case). NVIVO software will be used to analyse the documents to see how ‘social and health equity’ is included and conceptualised. The interview data will include qualitative descriptive and theory-driven critical discourse analysis. Our quantitative methodological work assessing the impact of public policy on health equity is experimental that is in its infancy but promises to provide the type of evidence demanded by policy-makers. Ethics and dissemination Our programme is recognising the inherently political nature of the uptake, formulation and implementation of policy. The early stages of our work indicate its feasibility. Our work is aided by a Critical Policy Reference Group. Multiple ethics approvals have been obtained with the foundation approval from the Social and Behavioural Ethics Committee, Flinders University (Project No: 6786). The theoretical, methodological and policy engagement processes established will provide improved evidence for policy-makers who wish to reduce health inequities and inform a new generation of policy savvy knowledge on social determinants. PMID:29273655

Gender and snow crab occupational asthma in Newfoundland and Labrador, Canada.

PubMed

Howse, Dana; Gautrin, Denyse; Neis, Barbara; Cartier, André; Horth-Susin, Lise; Jong, Michael; Swanson, Mark C

2006-06-01

Fish and shellfish processing employs many thousands of people globally, with shellfish processing becoming more important in recent years. Shellfish processing is associated with multiple occupational health and safety (OHS) risks. Snow crab occupational asthma (OA) is work-related asthma associated with processing snow crab. We present a gender analysis of findings from a 3-year multifaceted study of snow crab OA in Newfoundland and Labrador, Canada. The study was carried out in four snow crab processing communities between 2001 and 2004. An anonymous survey questionnaire on knowledge, beliefs, and concerns related to processing snow crab administered to 158 workers attending community meetings at the start of the research found that women were significantly more likely than men to associate certain health problems, especially chest tightness, difficulty breathing, and cough, with crab processing (P<0.001). Worker health assessments carried out with 215 processing workers (187 current/28 former; 120 female/95 male) found that female participants were more likely to be diagnosed as almost certain/highly probable snow crab OA and allergy (P=0.001) and to be sensitized to snow crab (P=0.01) than male participants. Work histories from the health assessments were used to classify processing jobs as male or female. Allergen sampling (211 allergen samples: 115 area, 96 personal breathing zone) indicated that the plant areas where these male jobs were concentrated were associated with lower levels of aerosolized crab allergens (the agents responsible for OA to snow crab) than areas associated with female jobs. This difference was statistically significant in the two plants with poor ventilation (p<0.001 and P=0.017 for these plants). A gender analysis of work history data showed that female health assessment participants were likely to have worked longer processing snow crab than males (5 years versus 3.5 years, respectively). Cross-referencing of work history results with allergen sampling data for male and female job areas showed a gender difference in median cumulative exposures (duration of exposure x level of exposures) for health assessment participants. Health assessment participants with estimated higher median cumulative exposures were more likely to receive a diagnosis of almost certain/highly probable OA and allergy. Semistructured interviews with 27 health assessment participants (24 female/ 3 male) with a diagnosis of almost certain/highly probable or possible snow crab OA indicated that these workers can experience substantial quality of life impacts while working and that they seek to reduce the economic impact of their illness by remaining at their jobs as long as possible. Indications of selection bias and other study limitations point to the need for more research exploring the relationship between the gender division of labor and knowledge, beliefs, and concerns about snow crab processing, as well as gender differences in prevalence, quality of life, and socioeconomic impact.

Boiling process modelling peculiarities analysis of the vacuum boiler

NASA Astrophysics Data System (ADS)

Slobodina, E. N.; Mikhailov, A. G.

2017-06-01

The analysis of the low and medium powered boiler equipment development was carried out, boiler units possible development directions with the purpose of energy efficiency improvement were identified. Engineering studies for the vacuum boilers applying are represented. Vacuum boiler heat-exchange processes where boiling water is the working body are considered. Heat-exchange intensification method under boiling at the maximum heat- transfer coefficient is examined. As a result of the conducted calculation studies, heat-transfer coefficients variation curves depending on the pressure, calculated through the analytical and numerical methodologies were obtained. The conclusion about the possibility of numerical computing method application through RPI ANSYS CFX for the boiling process description in boiler vacuum volume was given.

Massive violent death and contested national mourning in post-authoritarian Chile and Argentina: a sociocultural application of the dual process model.

PubMed

Robben, Antonius C G M

2014-01-01

This article uses the dual process model (DPM) in an analysis of the national mourning of tens of thousands of disappeared in Chile and Argentina by adapting the model from the individual to the collective level where society as a whole is bereaved. Perpetrators are also involved in the national mourning process as members of a bereaved society. This article aims to (a) demonstrate the DPMs significance for the analysis of national mourning in post-conflict societies and (b) explain oscillations between loss orientation and restoration orientation in coping with massive losses that seem contradictory from a grief work perspective.

Cognitive deficits in individuals with methamphetamine use disorder: A meta-analysis.

PubMed

Potvin, Stéphane; Pelletier, Julie; Grot, Stéphanie; Hébert, Catherine; Barr, Alasdair M; Lecomte, Tania

2018-05-01

Methamphetamine has long been considered as a neurotoxic substance causing cognitive deficits. Recently, however, the magnitude and the clinical significance of the cognitive effects associated with methamphetamine use disorder (MUD) have been debated. To help clarify this controversy, we performed a meta-analysis of the cognitive deficits associated with MUD. A literature search yielded 44 studies that assessed cognitive dysfunction in 1592 subjects with MUD and 1820 healthy controls. Effect size estimates were calculated using the Comprehensive Meta-Analysis, for the following 12 cognitive domains: attention, executive functions, impulsivity/reward processing, social cognition, speed of processing, verbal fluency/language, verbal learning and memory, visual learning and memory, visuo-spatial abilities and working memory. Findings revealed moderate impairment across most cognitive domains, including attention, executive functions, language/verbal fluency, verbal learning and memory, visual memory and working memory. Deficits in impulsivity/reward processing and social cognition were more prominent, whereas visual learning and visuo-spatial abilities were relatively spared cognitive domains. A publication bias was observed. These results show that MUD is associated with broad cognitive deficits that are in the same range as those associated with alcohol and cocaine use disorder, as recently shown by way of meta-analysis. The prominent effects of MUD on social cognition and impulsivity/reward processing are based on a small number of studies, and as such, these results will need to be replicated. The functional consequences (social and occupational) of the cognitive deficits of methamphetamine will also need to be determined. Copyright © 2018 Elsevier Ltd. All rights reserved.

Environmental Technology Verification Coatings and Coating Equipment Program (ETV CCEP). High Transfer Efficiency Spray Equipment - Generic Verification Protocol (Revision 0)

DTIC Science & Technology

2006-09-30

High-Pressure Waterjet • CO2 Pellet/Turbine Wheel • Ultrahigh-Pressure Waterjet 5 Process Water Reuse/Recycle • Cross-Flow Microfiltration ...documented on a process or laboratory form. Corrective action will involve taking all necessary steps to restore a measuring system to proper working order...In all cases, a nonconformance will be rectified before sample processing and analysis continues. If corrective action does not restore the