Effect of Compressive Stresses on Leakage Currents in Microchip Tantalum Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander

2012-01-01

Microchip tantalum capacitors are manufactured using new technologies that allow for production of small size capacitors (down to EIA case size 0402) with volumetric efficiency much greater than for regular chip capacitors. Due to a small size of the parts and leadless design they might be more sensitive to mechanical stresses that develop after soldering onto printed wiring boards (PWB) compared to standard chip capacitors. In this work, the effect of compressive stresses on leakage currents in capacitors has been investigated in the range of stresses up to 200 MPa. Significant, up to three orders of magnitude, variations of currents were observed after the stress exceeds a certain critical level that varied from 10 MPa to 180 MPa for capacitors used in this study. A stress-induced generation of electron traps in tantalum pentoxide dielectric is suggested to explain reversible variations of leakage currents in tantalum capacitors. Thermo-mechanical characteristics of microchip capacitors have been studied to estimate the level of stresses caused by assembly onto PWB and assess the risk of stress-related degradation and failures. Keywords: tantalum capacitors, leakage current, soldering, reliability, mechanical stress.

Lexical reorganization in Brazilian Portuguese: an articulatory study

PubMed Central

Meireles, A. R.; Barbosa, P. A.

2008-01-01

This work, which is couched in the theoretical framework of Articulatory Phonology, deals with the influence of speech rate on the change/variation from antepenultimate stress words into penultimate stress words in Brazilian Portuguese. Both acoustic and articulatory (EMMA) studies were conducted. On the acoustic side, results show different patterns of post-stressed vowel reduction according to the word type. Some words reduced their medial post-stressed vowels more than their final post-stressed vowels, and others reduced their final post-stressed vowels more than their medial post-stressed vowels. On the articulatory side, results show that the coarticulation degree of the post-stressed consonants increases with speech rate. Also, with the use of a measure called proportional consonantal interval (PCI), it was found in measurements of articulation that such measure is influenced by the word type. Three different groups of words were found according to their PCI. These results show how dynamical aspects influenced by speech rate increase are related to the lexical process of change/variation from antepenultimate stress words into penultimate ones. PMID:19885366

Physiological genomics of response to soil drying in diverse Arabidopsis accessions.

PubMed

Des Marais, David L; McKay, John K; Richards, James H; Sen, Saunak; Wayne, Tierney; Juenger, Thomas E

2012-03-01

Arabidopsis thaliana, like many species, is characterized by abundant genetic variation. This variation is rapidly being cataloged at the sequence level, but careful dissection of genetic variation in whole-organism responses to stresses encountered in the natural environment are lacking; this functional variation can be exploited as a natural mutant screen to determine gene function. Here, we document physiological and transcriptomic response to soil drying in 17 natural accessions of Arabidopsis. By imposing ecologically realistic stress conditions, we found that acclimation in Arabidopsis involved a strong signature of increased investment in photosynthesis, carbohydrate turnover, and root growth. Our results extend previous work in the Columbia accession suggesting that abscisic acid signaling pathways play an important role in drought stress response. We also identified several mechanisms, including an increase in leaf nitrogen concentration and upregulation of two-component signaling relays, that were common to most natural accessions but had not been identified in studies using only the Columbia accession. Principal component analysis reveals strong correlations between suites of genes and specific physiological responses to stress. The functional variants we identified may represent adaptive mutations in natural habitats and useful variants for agronomic improvement of crop species.

Physiological Genomics of Response to Soil Drying in Diverse Arabidopsis Accessions[W][OA

PubMed Central

Des Marais, David L.; McKay, John K.; Richards, James H.; Sen, Saunak; Wayne, Tierney; Juenger, Thomas E.

2012-01-01

Arabidopsis thaliana, like many species, is characterized by abundant genetic variation. This variation is rapidly being cataloged at the sequence level, but careful dissection of genetic variation in whole-organism responses to stresses encountered in the natural environment are lacking; this functional variation can be exploited as a natural mutant screen to determine gene function. Here, we document physiological and transcriptomic response to soil drying in 17 natural accessions of Arabidopsis. By imposing ecologically realistic stress conditions, we found that acclimation in Arabidopsis involved a strong signature of increased investment in photosynthesis, carbohydrate turnover, and root growth. Our results extend previous work in the Columbia accession suggesting that abscisic acid signaling pathways play an important role in drought stress response. We also identified several mechanisms, including an increase in leaf nitrogen concentration and upregulation of two-component signaling relays, that were common to most natural accessions but had not been identified in studies using only the Columbia accession. Principal component analysis reveals strong correlations between suites of genes and specific physiological responses to stress. The functional variants we identified may represent adaptive mutations in natural habitats and useful variants for agronomic improvement of crop species. PMID:22408074

Tensile elastic properties of 18:8 chromium-nickel steel as affected by plastic deformation

NASA Technical Reports Server (NTRS)

Mcadam, D J; Mebs, R W

1939-01-01

The relationship between stress and strain, and between stress and permanent set, for 18:8 alloy as affected by prior plastic deformation is discussed. Hysteresis and creep and their effects on the stress-strain and stress-set curves are also considered, as well as the influence of duration of the rest interval after cold work and the influence of plastic deformation on proof stresses, on the modulus of elasticity at zero stress, and on the curvature of the stress-strain line. A constant (c sub 1) is suggested to represent the variation of the modulus of elasticity with stress.

Effective Stress Law in Unconventional Reservoirs under Different Boundary Conditions

NASA Astrophysics Data System (ADS)

Saurabh, S.; Harpalani, S.

2017-12-01

Unconventional reservoirs have attracted a great deal of research interest worldwide during the past two decades. Low permeability and specialized techniques required to exploit these resources present opportunities for improvement in both production rates and ultimate recovery. Understanding subsurface stress modifications and permeability evolution are valuable when evaluating the prospects of unconventional reservoirs. These reservoir properties are functions of effective stress. As a part of this study, effective stress law, specifically the variation of anisotropic Biot's coefficient under various boundary conditions believed to exist in gas reservoirs by different researchers, has been established. Pressure-dependent-permeability (PdK) experiments were carried out on San Juan coal under different boundary conditions, that is, uniaxial strain condition and constant volume condition. Stress and strain in the vertical and horizontal directions were monitored throughout the experiment. Data collected during the experiments was used to determine the Biot's coefficient in vertical and horizontal directions under these two boundary conditions, treating coal as transversely isotropic. The variation of Biot's coefficient was found to be well correlated with the variation in coal permeability. Based on the estimated values of Biot's coefficients, a theory of variation in its value is presented for other boundary conditions. The findings of the study shed light on the inherent behavior of Biot's coefficient under different reservoir boundary conditions. This knowledge can improve the modeling work requiring estimation of effective stress in reservoirs, such as, pressure-/stress- dependent permeability. At the same time, if the effective stresses are known with more certainty by other methods, it enables assessment of the unknown reservoir boundary conditions.

Segmentation of Slow Slip Events in South Central Alaska Possibly Controlled by a Subducted Oceanic Plateau

NASA Astrophysics Data System (ADS)

Li, Haotian; Wei, Meng; Li, Duo; Liu, Yajing; Kim, YoungHee; Zhou, Shiyong

2018-01-01

Recent GPS observations show that slow slip events in south central Alaska are segmented along strike. Here we review several mechanisms that might contribute to this segmentation and focus on two: along-strike variation of slab geometry and effective normal stress. We then test them by running numerical simulations in the framework of rate-and-state friction with a nonplanar fault geometry. Results show that the segmentation is most likely related to the along-strike variation of the effective normal stress on the fault plane caused by the Yakutat Plateau. The Yakutat Plateau could affect the effective normal stress by either lowering the pore pressure in Upper Cook Inlet due to less fluids release or increasing the normal stress due to the extra buoyancy caused by the subducted Yakutat Plateau. We prefer the latter explanation because it is consistent with the relative amplitudes of the effective normal stress in Upper and Lower Cook Inlet and there is very little along-strike variation in Vp/Vs ratio in the fault zone from receiver function analysis. However, we cannot exclude the possibility that the difference in effective normal stress results from along-strike variation of pore pressure due to the uncertainties in the Vp/Vs estimates. Our work implies that a structural anomaly can have a long-lived effect on the subduction zone slip behavior and might be a driving factor on along-strike segmentation of slow slip events.

Variability of Hormonal Stress Markers and Stress Responses in a Large Cross-Sectional Sample of Elephant Seals

DTIC Science & Technology

2014-09-30

hormones and function in elephant seals; 3) determine the impact of baseline variation in aldosterone on electrolyte balance in elephant seals; 4...may have broad implications for marine mammal species. Task 3 – Impact of aldosterone variability on osmolality Work on the Parent Project and...a parallel project on bottlenose dolphins has shown the importance of aldosterone as a stress hormone in marine mammals. Aldosterone covaries with

Variability of Hormonal Stress Markers and Stress Responses in a Large Cross-Sectional Sample of Elephant Seals

DTIC Science & Technology

2015-09-30

hormones and function in elephant seals; 3) determine the impact of baseline variation in aldosterone on electrolyte balance in elephant seals; 4...3 – Impact of aldosterone variability on osmolality Work on the Parent Project and a parallel project on bottlenose dolphins has shown the...importance of aldosterone as a stress hormone in marine mammals. Aldosterone covaries with cortisol in many groups (Figure 4) and ACTH challenges in the

Heart Rate Variability in Obstetricians Working 14-Hour Call Compared to 24-Hour Call in Labour and Delivery.

PubMed

Thurman, Robin H; Yoon, Eugene; Murphy, Kellie E; Windrim, Rory; Farrugia, M Michéle

2017-12-01

Obstetricians have stressful and demanding jobs that may impact their health. A physiological measurement of cardiac function which varies with stress is heart rate variability (HRV). By measuring the cyclic variations in R-R intervals, or beat-to-beat differences, HRV reflects the continuous interplay of the controlling forces in the autonomic nervous system. Studies have shown HRV to be reduced during periods of work-induced stress, including 24-hour shifts. Our study aimed to determine if there was a correlation between length of shift worked and HRV. We hypothesised that working for a full 24-hour period is more stressful than a shorter, nighttime-only period, and HRV analyses were used to measure this objectively. Obstetricians wore an HRV monitor for 24 hours during both a regular day followed by a 14-hour night shift and a continuous 24-hour shift in labour and delivery. The 24-hour samples were analysed using standard HRV measurements. HRV measurements obtained from each physician were then compared according to shift type, with each physician acting as his or her own comparator. There were no statistically significant differences in the most important measures of HRV between 24-hour periods which included either a 14-hour overnight shift or a continuous 24-hour shift on labour and delivery. We found no significant differences in key HRV measures in obstetricians working 14 hours versus 24 hours in labour and delivery. An anecdotal increase in physician awareness of his/her own health related to working conditions was noted during the study. Future studies should attempt to control for the hours prior to a night shift, assess associated endocrine variations, and focus upon HRV in the post-shift period. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Strengthening Mechanisms in Thermomechanically Processed NbTi-Microalloyed Steel

NASA Astrophysics Data System (ADS)

Kostryzhev, Andrii G.; Marenych, Olexandra O.; Killmore, Chris R.; Pereloma, Elena V.

2015-08-01

The effect of deformation temperature on microstructure and mechanical properties was investigated for thermomechanically processed NbTi-microalloyed steel with ferrite-pearlite microstructure. With a decrease in the finish deformation temperature at 1348 K to 1098 K (1075 °C to 825 °C) temperature range, the ambient temperature yield stress did not vary significantly, work hardening rate decreased, ultimate tensile strength decreased, and elongation to failure increased. These variations in mechanical properties were correlated to the variations in microstructural parameters (such as ferrite grain size, solid solution concentrations, precipitate number density and dislocation density). Calculations based on the measured microstructural parameters suggested the grain refinement, solid solution strengthening, precipitation strengthening, and work hardening contributed up to 32 pct, up to 48 pct, up to 25 pct, and less than 3 pct to the yield stress, respectively. With a decrease in the finish deformation temperature, both the grain size strengthening and solid solution strengthening increased, the precipitation strengthening decreased, and the work hardening contribution did not vary significantly.

Tensile stress-strain and work hardening behaviour of P9 steel for wrapper application in sodium cooled fast reactors

NASA Astrophysics Data System (ADS)

Christopher, J.; Choudhary, B. K.; Isaac Samuel, E.; Mathew, M. D.; Jayakumar, T.

2012-01-01

Tensile flow behaviour of P9 steel with different silicon content has been examined in the framework of Hollomon, Ludwik, Swift, Ludwigson and Voce relationships for a wide temperature range (300-873 K) at a strain rate of 1.3 × 10 -3 s -1. Ludwigson equation described true stress ( σ)-true plastic strain ( ɛ) data most accurately in the range 300-723 K. At high temperatures (773-873 K), Ludwigson equation reduces to Hollomon equation. The variations of instantaneous work hardening rate ( θ = dσ/ dɛ) and θσ with stress indicated two-stage work hardening behaviour. True stress-true plastic strain, flow parameters, θ vs. σ and θσ vs. σ with respect to temperature exhibited three distinct temperature regimes and displayed anomalous behaviour due to dynamic strain ageing at intermediate temperatures. Rapid decrease in flow stress and flow parameters, and rapid shift in θ- σ and θσ- σ towards lower stresses with increase in temperature indicated dominance of dynamic recovery at high temperatures.

Crustal deformation at the terminal stage before earthquake occurrence

NASA Astrophysics Data System (ADS)

Chen, C. H.; Meng, G.; Su, X.

2016-12-01

GPS data retrieved from 300 stations in China are used in this work to study stressed areas during earthquake preparation periods. Surface deformation data are derived by using the standard method and are smoothed by a temporal moving to mitigate influence from noise. A statistical method is used to distinguish significant variations from the smoothed data. The spatial distributions comprised of those significant variations show that a diameter of a stressed area preparing earthquakes is about 3500 km for a M6 event. The deformation deduced from the significant variations is highly related with the slip direction of the fault plane determined through the focal mechanism solution of earthquakes. Although the causal mechanism of such large stressed areas with rapid changes is not fully understood, the analytical results suggest that the earthquake preparation would be one of the factors dominating the common mode error in GPS studies. Mechanisms and/or numerical models of some pre-earthquake anomalous phenomena would be reconsidered based on this novel observation.

Stress Recovery and Error Estimation for 3-D Shell Structures

NASA Technical Reports Server (NTRS)

Riggs, H. R.

2000-01-01

The C1-continuous stress fields obtained from finite element analyses are in general lower- order accurate than are the corresponding displacement fields. Much effort has focussed on increasing their accuracy and/or their continuity, both for improved stress prediction and especially error estimation. A previous project developed a penalized, discrete least squares variational procedure that increases the accuracy and continuity of the stress field. The variational problem is solved by a post-processing, 'finite-element-type' analysis to recover a smooth, more accurate, C1-continuous stress field given the 'raw' finite element stresses. This analysis has been named the SEA/PDLS. The recovered stress field can be used in a posteriori error estimators, such as the Zienkiewicz-Zhu error estimator or equilibrium error estimators. The procedure was well-developed for the two-dimensional (plane) case involving low-order finite elements. It has been demonstrated that, if optimal finite element stresses are used for the post-processing, the recovered stress field is globally superconvergent. Extension of this work to three dimensional solids is straightforward. Attachment: Stress recovery and error estimation for shell structure (abstract only). A 4-node, shear-deformable flat shell element developed via explicit Kirchhoff constraints (abstract only). A novel four-node quadrilateral smoothing element for stress enhancement and error estimation (abstract only).

Hair cortisol and self-reported stress in healthy, working adults.

PubMed

Gidlow, Christopher J; Randall, Jason; Gillman, Jamie; Silk, Steven; Jones, Marc V

2016-01-01

Chronic stress can be important in the pathology of chronic disease. Hair cortisol concentrations (HCC) are proposed to reflect long term cortisol secretion from exposure to stress. To date, inconsistencies in the relationship between HCC and self-reported stress have been attributed to variation and limitations of perceived stress measurement. We report data from employees of two large public sector worksites (n=132). Socio-demographic, health, lifestyle, perceived stress scale (PSS), and work-related effort reward imbalance (ERI) were collected at baseline. Participants were asked to respond to mobile text messages every two days, asking them to report current stress levels (Ecological momentary assessment, EMA), and mean stress was determined overall, during work hours, and out of work hours. At 12 weeks, the appraisal of stressful life events scale (ALES) was completed and 3 cm scalp hair samples were taken, from which HCC was determined (to reflect cortisol secretion over the past 12 weeks). Mean response rate to EMA was 81.9 ± 14.9%. Associations between HCC and the various self-reported stress measures (adjusted for use of hair dye) were weak (all<.3). We observed significant associations with HCC for EMA measured stress responses received out of work hours (ρ=.196, p=.013) and ALES Loss subscale (ρ=.241, p=.003), and two individual items from ERI (relating to future work situation). In regression analysis adjusting for other possible confounders, only the HCC-ALES Loss association remained significant (p=.011). Overall, our study confirms that EMA provides a useful measurement tool that can gather perceived stress measures in real-time. But, there was no relationship between self-reported stress collected in this way, and HCC. The modest association between HCC and stress appraisal does however, provide some evidence for the role of cognitive processes in chronic stress. Copyright © 2015 Elsevier Ltd. All rights reserved.

General quantitative analysis of stress partitioning and boundary conditions in undrained biphasic porous media via a purely macroscopic and purely variational approach

NASA Astrophysics Data System (ADS)

Serpieri, Roberto; Travascio, Francesco

2016-03-01

In poroelasticity, the effective stress law relates the external stress applied to the medium to the macroscopic strain of the solid phase and the interstitial pressure of the fluid saturating the mixture. Such relationship has been formerly introduced by Terzaghi in form of a principle. To date, no poroelastic theory is capable of recovering a stress partitioning law in agreement with Terzaghi's postulated one in the absence of ad hoc constitutive assumptions on the medium. We recently proposed a variational macroscopic continuum description of two-phase poroelasticity to derive a general biphasic formulation at finite deformations, termed variational macroscopic theory of porous media (VMTPM). Such approach proceeds from the inclusion of the intrinsic volumetric strain among the kinematic descriptors aside to macroscopic displacements, and as a variational theory, uses the Hamilton least-action principle as the unique primitive concept of mechanics invoked to derive momentum balance equations. In a previous related work it was shown that, for the subclass of undrained problems, VMTPM predicts that stress is partitioned in the two phases in strict compliance with Terzaghi's law, irrespective of the microstructural and constitutive features of a given medium. In the present contribution, we further develop the linearized framework of VMTPM to arrive at a general operative formula that allows the quantitative determination of stress partitioning in a jacketed test over a generic isotropic biphasic specimen. This formula is quantitative and general, in that it relates the partial phase stresses to the externally applied stress as function of partitioning coefficients that are all derived by strictly following a purely variational and purely macroscopic approach, and in the absence of any specific hypothesis on the microstructural or constitutive features of a given medium. To achieve this result, the stiffness coefficients of the theory are derived by using exclusively variational arguments. We derive the boundary conditions attained across the boundary of a poroelastic saturated medium in contact with an impermeable surface also based on purely variational arguments. A technique to retrieve bounds for the resulting elastic moduli, based on Hashin's composite spheres assemblage method, is also reported. Notably, in spite of the minimal mechanical hypotheses introduced, a rich mechanical behavior is observed.

Work hours and cortisol variation from non-working to working days.

PubMed

Marchand, Alain; Durand, Pierre; Lupien, Sonia

2013-07-01

This study aims at modelling the relationship between the number of work hours per week and cortisol variation across 3 days by comparing non-working day to working day in a population of day-shift workers. Questionnaire data and saliva samples for cortisol analysis were collected on 132 day-shift workers employed in 13 workplaces in Canada. Consenting workers provided 5 saliva samples a day (awaking, 30 min after awaking, 2 p.m., 4 p.m., bedtime) repeated 3 times (Saturday, Tuesday, Thursday) over a week, to provide measures at work and non-work times and settings. Multilevel regression models were estimated from cortisol measurements at each occasion within a day at level-1, days at level-2 and workers at level-3. Controlling for gender and age, results revealed significant variations in salivary cortisol concentration between sample, day and worker levels. Cortisol increases linearly from non-working day to work days and work hours per week interacted with days, revealing a positive association between the number of work hours per week and cortisol concentrations during these days. Work hours per week did not interact with awaking, 30 min after awaking, 2 p.m., 4 p.m., and bedtime cortisol concentrations. Gender and age had neither main effects nor interaction effects. No significant cortisol variations were found between workplaces. These results suggest that work hours act as a stressor that is associated with significant variations in cortisol concentrations over working days. Non-working days may contribute to stress reduction in workers who experience longer work hours.

Visualizing Stress and Temperature Distribution During Elevated Temperature Deformation of IN-617 Using Nanomechanical Raman Spectroscopy

NASA Astrophysics Data System (ADS)

Zhang, Yang; Wang, Hao; Tomar, Vikas

2018-04-01

This work presents direct measurements of stress and temperature distribution during the mesoscale microstructural deformation of Inconel-617 (IN-617) during 3-point bending tests as a function of temperature. A novel nanomechanical Raman spectroscopy (NMRS)-based measurement platform was designed for simultaneous in situ temperature and stress mapping as a function of microstructure during deformation. The temperature distribution was found to be directly correlated to stress distribution for the analyzed microstructures. Stress concentration locations are shown to be directly related to higher heat conduction and result in microstructural hot spots with significant local temperature variation.

Intraplate deformation, stress in the lithosphere and the driving mechanism for plate motions

NASA Technical Reports Server (NTRS)

Hager, Bradford H.

1988-01-01

During this period work was carried out on three fronts relevant to the understanding of intraplate deformation, stress in the lithosphere, and the driving mechanisms for plate motions: (1) observational constraints, using GPS geodesy on the deformation in the region of the boundry between the Pacific and North American plates in central and southern California; (2) numerical modeling of the effects of temperature dependent lithospheric viscosity on the stress and strain history of extensional regimes; and (3) improvement of estimates of mantle viscosity variation, the long-wave-length density variations in the mantle, and the topography of the core-mantel boundary from modeling of geoid anomalies, nutation, and changes in length of day. These projects are described in more detail, followed by a discussion of meetings attended and a list of abstracts and papers submitted and/or published.

Patterns of salivary cortisol levels can manifest work stress in emergency care providers.

PubMed

Nakajima, Yasushi; Takahashi, Takayuki; Shetty, Vivek; Yamaguchi, Masaki

2012-05-01

To develop objective assessments of work fatigue, we investigated the patterns of changes in salivary cortisol levels in emergency care providers working extended work shifts. Fourteen subjects, comprising seven physicians and seven physician assistants, provided unstimulated saliva samples at regular intervals over the course of a 24-h work shift and over their subsequent free day. There was a significant time effect, with early morning cortisol levels being significantly attenuated following the work shift. Native diurnal variations varied by gender, with the female subjects manifesting greater cortisol levels. Physicians also had higher cortisol profiles even though their wake-rest cycles were similar to those of the physician assistants. Our results suggest that temporal changes, as well as diurnal similarities, in the salivary cortisol patterns can reflect work-related stress and recovery. In particular, early morning cortisol levels may manifest individual reactivity to work stressors as well as sleep deprivation.

Post-Injection Induced Seismicity in EGS: Triggering Mechanisms and Mitigation.

NASA Astrophysics Data System (ADS)

De Simone, S.; Carrera, J.; Vilarrasa, V.

2017-12-01

Induced microseismicity is a controversial issue related to Enhanced Geothermal Systems (EGS) and in general with fluid injection into deep geological formations. The occurring of felt earthquakes after stopping injection especially generates concern, because the correlation between injection and seismic activity is unclear. The aim of this work is to advance in the understanding of the processes that may induce or trigger co- and post-injection seismicity. To this end we investigate the thermo-hydro-mechanical coupling by means of numerical simulations of hydraulic stimulation of deep geothermal systems. We find that preferential flow through conductive fractures or fault zones provokes pressure and temperature perturbations that result in not only heterogeneous variation of the stress field, but also highly anisotropic variations of the local stress tensor. Anisotropic variations tend to stabilize some fractures, but destabilize others. Moreover, activation of shear slip causes a significant variation of the stress field that enlarges the range of critical fracture orientations. We find that post-injection seismicity may occur on non-critically oriented faults that were originally stable. During injection, such faults become destabilized by thermal and shear slip stress changes, but remain static by the superposition of the stabilizing effect of pressure forces. However, these fractures become unstable and fail when the pressure forcing dissipates shortly after injection stops abruptly, which suggests that a slow reduction in injection rate may mitigate post-injection seismicity.

Experimental residual stress evaluation of hydraulic expansion transitions in Alloy 690 steam generator tubing

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGregor, R.; Doherty, P.; Hornbach, D.

1995-12-31

Nuclear Steam Generator (SG) service reliability and longevity have been seriously affected worldwide by corrosion at the tube-to-tubesheet joint expansion. Current SG designs for new facilities and replacement projects enhance corrosion resistance through the use of advanced tubing materials and improved joint design and fabrication techniques. Here, transition zones of hydraulic expansions have undergone detailed experimental evaluation to define residual stress and cold-work distribution on and below the secondary-side surface. Using X-ray diffraction techniques, with supporting finite element analysis, variations are compared in tubing metallurgical condition, tube/pitch geometry, expansion pressure, and tube-to-hole clearance. Initial measurements to characterize the unexpanded tubemore » reveal compressive stresses associated with a thin work-hardened layer on the outer surface of the tube. The gradient of cold-work was measured as 3% to 0% within .001 inch of the surface. The levels and character of residual stresses following hydraulic expansion are primarily dependent on this work-hardened surface layer and initial stress state that is unique to each tube fabrication process. Tensile stresses following expansion are less than 25% of the local yield stress and are found on the transition in a narrow circumferential band at the immediate tube surface (< .0002 inch/0.005 mm depth). The measurements otherwise indicate a predominance of compressive stresses on and below the secondary-side surface of the transition zone. Excellent resistance to SWSCC initiation is offered by the low levels of tensile stress and cold-work. Propagation of any possible cracking would be deterred by the compressive stress field that surrounds this small volume of tensile material.« less

Hydrologically-driven crustal stresses and seismicity in the New Madrid Seismic Zone.

PubMed

Craig, Timothy J; Chanard, Kristel; Calais, Eric

2017-12-15

The degree to which short-term non-tectonic processes, either natural and anthropogenic, influence the occurrence of earthquakes in active tectonic settings or 'stable' plate interiors, remains a subject of debate. Recent work in plate-boundary regions demonstrates the capacity for long-wavelength changes in continental water storage to produce observable surface deformation, induce crustal stresses and modulate seismicity rates. Here we show that a significant variation in the rate of microearthquakes in the intraplate New Madrid Seismic Zone at annual and multi-annual timescales coincides with hydrological loading in the upper Mississippi embayment. We demonstrate that this loading, which results in geodetically observed surface deformation, induces stresses within the lithosphere that, although of small amplitude, modulate the ongoing seismicity of the New Madrid region. Correspondence between surface deformation, hydrological loading and seismicity rates at both annual and multi-annual timescales indicates that seismicity variations are the direct result of elastic stresses induced by the water load.

Roughness topographical effects on mean momentum and stress budgets in developed turbulent channel flows

NASA Astrophysics Data System (ADS)

Aghaei Jouybari, Mostafa; Yuan, Junlin

2017-11-01

Direct numerical simulations of turbulent channel flows are carried out over two surfaces: a synthesized sand-grain surface and a realistic turbine roughness that is characterized by more prominent large-scale surface features. To separate the effects of wall-normal variation of the roughness area fraction from the (true) variation of flow statistics, the governing equations are area-averaged using intrinsic averaging, contrary to the usually practice based on the total area (i.e., superficial averaging). Additional terms appear in the mean-momentum equation resulted from the wall-normal variation of the solid fraction and play a role in the near-wall balance. Results from surfaces with a step solidity function (e.g., cubes) will also be discussed. Compared to the sand grains, the turbine surface generates stronger form-induced fluctuations, despite weaker dispersive shear stress. This is associated with more significant form-induced productions (comparable to shear production) in Reynolds stress budgets, weaker pressure work, and, consequently, more anisotropic redistribution of turbulent kinetic energy in the roughness sublayer, which potentially leads to different turbulent responses between the two surfaces in non-equilibrium flows.

Working the night shift causes increased vascular stress and delayed recovery in young women.

PubMed

Lo, Shih-Hsiang; Lin, Lian-Yu; Hwang, Jing-Shiang; Chang, Yu-Yin; Liau, Chiau-Suong; Wang, Jung-Der

2010-08-01

Shiftwork has been associated with elevated blood pressure (BP) and decreased heart-rate variability (HRV), factors that may increase the long-term risk of cardiovascular-related mortality and morbidity. This study explored the effect of shiftwork on dynamic changes in autonomic control of HRV (cardiac stress), systolic BP and diastolic BP, i.e., SBP and DBP (vascular stress), and recovery in the same subjects working different shifts. By studying the same subjects, the authors could reduce the effect of possible contribution of between-subject variation from genetic predisposition and environmental factors. The authors recruited 16 young female nurses working rotating shifts--day (08:00-16:00 h), evening (16:00-00:00 h), and night (00:00-08:00 h)--and 6 others working the regular day shift. Each nurse received simultaneous and repeated 48-h ambulatory electrocardiography and BP monitoring during their work day and the following off-duty day. Using a linear mixed-effect model to adjust for day shift, the results of the repeated-measurements and self-comparisons found significant shift differences in vascular stress. While working the night shift, the nurses showed significant increases in vascular stress, with increased SBP of 9.7 mm Hg. The changes of SBP and DBP seemed to peak during waking time at the same time on the day off as they did on the working day. Whereas HRV profiles usually returned to baseline level after each shift, the SBP and DBP of night-shift workers did not completely return to baseline levels the following off-duty day (p < .001). The authors concluded that although the nurses may recover from cardiac stress the first day off following a night shift, they do not completely recover from increases in vascular stress on that day.

Measuring stress variation with depth using Barkhausen signals

NASA Astrophysics Data System (ADS)

Kypris, O.; Nlebedim, I. C.; Jiles, D. C.

2016-06-01

Magnetic Barkhausen noise analysis (BNA) is an established technique for the characterization of stress in ferromagnetic materials. An important application is the evaluation of residual stress in aerospace components, where shot-peening is used to strengthen the part by inducing compressive residual stresses on its surface. However, the evaluation of the resulting stress-depth gradients cannot be achieved by conventional BNA methods, where signals are interpreted in the time domain. The immediate alternative of using x-ray diffraction stress analysis is less than ideal, as the use of electropolishing to remove surface layers renders the part useless after inspection. Thus, a need for advancing the current BNA techniques prevails. In this work, it is shown how a parametric model for the frequency spectrum of Barkhausen emissions can be used to detect variations of stress along depth in ferromagnetic materials. Proof of concept is demonstrated by inducing linear stress-depth gradients using four-point bending, and fitting the model to the frequency spectra of measured Barkhausen signals, using a simulated annealing algorithm to extract the model parameters. Validation of our model suggests that in bulk samples the Barkhausen frequency spectrum can be expressed by a multi-exponential function with a dependence on stress and depth. One practical application of this spectroscopy method is the non-destructive evaluation of residual stress-depth profiles in aerospace components, thus helping to prevent catastrophic failures.

Fluorescence spectroscopy applied to orange trees

NASA Astrophysics Data System (ADS)

Marcassa, L. G.; Gasparoto, M. C. G.; Belasque, J., Jr.; Lins, E. C.; Dias Nunes, F.; Bagnato, V. S.

2006-05-01

In this work, we have applied laser-induced fluorescence spectroscopy to investigate biological processes in orange trees (Citrus aurantium L.). We have chosen to investigate water stress and Citrus Canker, which is a disease caused by the Xanthomonas axonopodis pv. citri bacteria. The fluorescence spectroscopy was investigated by using as an excitation source a 442-nm 15-mW HeCd gas multimode discharge laser and a 532-nm 10-mW Nd3+:YAG laser. The stress manifestation was detected by the variation of fluorescence ratios of the leaves at different wavelengths. The fluorescence ratios present a significant variation, showing the possibility to observe water stress by fluorescence spectrum. The Citrus Canker’s contaminated leaves were discriminated from the healthy leaves using a more complex analysis of the fluorescence spectra. However, we were unable to discriminate it from another disease, and new fluorescence experiments are planned for the future.

A critical state model for mudrock behavior at high stress levels

NASA Astrophysics Data System (ADS)

Heidari, M.; Nikolinakou, M. A.; Flemings, P. B.

2016-12-01

Recent experimental work has documented that the compression behavior, friction angle, and lateral stress ratio (k0) of mudrocks vary over the stress range of 1 to 100 MPa. We integrate these observations into a critical state model. The internal friction angle and the slope of the compression curve are key parameters in a mudrock critical state model. Published models assume that these parameters do not depend on the stress level, and hence predict lateral stress and normalized strength ratios that do not change with the stress level. However, recent experimental data on resedimented mudrock samples from Eugene Island, Gulf of Mexico, demonstrate that all these parameters vary considerably with the stress level (Casey and Germaine, 2013; Casey et al., 2015). To represent these variations, we develop an enhanced critical state model that uses a stress-level-dependent friction angle and a curvilinear compression curve. We show that this enhanced model predicts the observed variations of the lateral stress and strength ratios. The successful performance of our model indicates that the critical state theory developed for soil can predict mudrock nonlinear behavior at high stress levels and thus can be used in modeling geologic systems. Casey, B., Germaine, J., 2013. Stress Dependence of Shear Strength in Fine-Grained Soils and Correlations with Liquid Limit. J. Geotech. Geoenviron. Eng. 139, 1709-1717. Casey, B., Germaine, J., Flemings, P.B., Fahy, B.P., 2015. Estimating horizontal stresses for mudrocks under one-dimensional compression. Mar. Pet. Geol. 65, 178-186.

Ethnic Differences in Family Stress Processes Among African-Americans and Black Caribbeans

PubMed Central

Caldwell, Cleopatra Howard; Bellatorre, Anna; Jackson, James S.

2012-01-01

Several theories of stress exposure, including the stress process and the family stress model for economically disadvantaged families, suggest that family processes work similarly across race/ethnic groups. Much of this research, however, treats African-Americans as a monolithic group and ignores potential differences in family stress processes within race that may emerge across ethnic groups. This study examines whether family stress processes differ intraracially in African-American and Black Caribbean families. Using data from the National Survey of American Life, a national representative data set of African-American and Black Caribbean families, we assess the extent to which parents’ stress appraisals and psychological adjustment are related to their adolescent children’s stress appraisals, psychological adjustment, and depressive symptoms. Our study illustrates that stress processes differ by ethnicity and operate through varying pathways in African-American and Black Caribbean families. The implications of intraracial variations in stress processes are discussed. PMID:23349643

Psychosocial determinants of premature cardiovascular mortality differences within Hungary.

PubMed

Kopp, Maria; Skrabski, Arpád; Szántó, Zsuzsa; Siegrist, Johannes

2006-09-01

The life expectancy gap between Central-Eastern European (CEE) countries, including Hungary, and Western Europe (WE) is mainly attributable to excess cardiovascular (CV) mortality in midlife. This study explores the contribution of socioeconomic, work related, psychosocial, and behavioural variables to explaining variations of middle aged male and female CV mortality across 150 sub-regions in Hungary. Cross sectional, ecological analyses. 150 sub-regions of Hungary. 12 643 people were interviewed in Hungarostudy 2002 survey, representing the Hungarian population according to sex, age, and sub-regions. Independent variables were income, education, control in work, job insecurity, weekend working hours, social support, depression, hostility, anomie, smoking, body mass index, and alcohol misuse. Gender specific standardised premature (45-64 years) total CV, ischaemic heart disease, and cerebrovascular mortality rates in 150 sub-regions of Hungary. Low education and income were the most important determinants of mid-aged CV mortality differences across sub-regions. High weekend workload, low social support at work, and low control at work account for a large part of variation in male premature CV mortality rates, whereas job insecurity, high weekend workload, and low control at work contribute most noticeably to variations in premature CV mortality rates among women. Low social support from friends, depression, anomie, hostility, alcohol misuse and cigarette smoking can also explain a considerable part of variations of premature CV mortality differences. Variations in middle aged CV mortality rates in a rapidly changing society in CEE are largely accounted for by distinct unfavourable working and other psychosocial stress conditions.

Affect adjective check list assessment of mood variations in air traffic controllers.

DOT National Transportation Integrated Search

1971-04-01

Three groups of subjects completed Composite Mood Adjective Check Lists (CMACL) before and after selected shifts at two air traffic control (ATC) facilities as part of a multi-discipline study of stress in ATC work. : At one facility, a high traffic ...

Variation of desiccation tolerance and longevity in fern spores

USDA-ARS?s Scientific Manuscript database

This work contributes to the understanding of plant cell responses to water stress when applied at different intensity and duration. Fern spores are used to explore survival at relative humidity (RH) < 85% because their unicellular nature eliminates complexities that may arise in multicellular orga...

Stress and body condition are associated with climate and demography in Asian elephants.

PubMed

Mumby, Hannah S; Mar, Khyne U; Thitaram, Chatchote; Courtiol, Alexandre; Towiboon, Patcharapa; Min-Oo, Zaw; Htut-Aung, Ye; Brown, Janine L; Lummaa, Virpi

2015-01-01

Establishing links between ecological variation, physiological markers of stress and demography is crucial for understanding how and why changes in environmental conditions affect population dynamics, and may also play a key role for conservation efforts of endangered species. However, detailed longitudinal studies of long-lived species are rarely available. We test how two markers of stress and body condition vary through the year and are associated with climatic conditions and large-scale mortality and fertility variation in the world's largest semi-captive population of Asian elephants employed in the timber industry in Myanmar. Glucocorticoid metabolites (used as a proxy for stress levels in 75 elephants) and body weight (used as a proxy for condition in 116 elephants) were monitored monthly across a typical monsoon cycle and compared with birth and death patterns of the entire elephant population over half a century (n = 2350). Our results show seasonal variation in both markers of stress and condition. In addition, this variation is correlated with population-level demographic variables. Weight is inversely correlated with population mortality rates 1 month later, and glucocorticoid metabolites are negatively associated with birth rates. Weight shows a highly positive correlation with rainfall 1 month earlier. Determining the factors associated with demography may be key to species conservation by providing information about the correlates of mortality and fertility patterns. The unsustainability of the studied captive population has meant that wild elephants have been captured and tamed for work. By elucidating the correlates of demography in captive elephants, our results offer management solutions that could reduce the pressure on the wild elephant population in Myanmar.

Probability of stress-corrosion fracture under random loading.

NASA Technical Reports Server (NTRS)

Yang, J.-N.

1972-01-01

A method is developed for predicting the probability of stress-corrosion fracture of structures under random loadings. The formulation is based on the cumulative damage hypothesis and the experimentally determined stress-corrosion characteristics. Under both stationary and nonstationary random loadings, the mean value and the variance of the cumulative damage are obtained. The probability of stress-corrosion fracture is then evaluated using the principle of maximum entropy. It is shown that, under stationary random loadings, the standard deviation of the cumulative damage increases in proportion to the square root of time, while the coefficient of variation (dispersion) decreases in inversed proportion to the square root of time. Numerical examples are worked out to illustrate the general results.

The role of stress in absenteeism: cortisol responsiveness among patients on long-term sick leave.

PubMed

Jacobsen, Henrik B; Bjørngaard, Johan Håkon; Hara, Karen W; Borchgrevink, Petter C; Woodhouse, Astrid; Landrø, Nils Inge; Harris, Anette; Stiles, Tore C

2014-01-01

This study aimed to (1) See whether increased or decreased variation relate to subjective reports of common somatic and psychological symptoms for a population on long-term sick leave; and (2) See if this pattern in variation is correlated with autonomic activation and psychological appraisal. Our participants (n = 87) were referred to a 3.5-week return-to-work rehabilitation program, and had been on paid sick leave >8 weeks due to musculoskeletal pain, fatigue and/or common mental disorders. An extensive survey was completed, addressing socio-demographics, somatic and psychological complaints. In addition, a physician and a psychologist examined the participants, determining baseline heart rate, medication use and SCID-I diagnoses. During the 3.5-week program, the participants completed the Trier Social Stress Test for Groups. Participants wore heart rate monitors and filled out Visual Analogue Scales during the TSST-G. Our participants presented a low cortisol variation, with mixed model analyses showing a maximal increase in free saliva cortisol of 26% (95% CI, 0.21-0.32). Simultaneously, the increase in heart rate and Visual Analogue Scales was substantial, indicating autonomic and psychological activation consistent with intense stress from the Trier Social Stress Test for Groups. The current findings are the first description of a blunted cortisol response in a heterogeneous group of patients on long-term sick leave. The results suggest lack of cortisol reactivity as a possible biological link involved in the pathway between stress, sustained activation and long-term sick leave.

Analytical approach to peel stresses in bonded composite stiffened panels

NASA Technical Reports Server (NTRS)

Barkey, Derek A.; Madan, Ram C.; Sutton, Jason O.

1987-01-01

A closed-form solution was obtained for the stresses and displacements of two bonded beams. A system of two fourth-order and two second-order differential equations with the associated boundary equations was determined using a variational work approach. A FORTRAN computer program was devised to solve for the eigenvalues and eigenvectors of this system and to calculate the coefficients from the boundary conditions. The results were then compared with NASTRAN finite-element solutions and shown to agree closely.

Direct Observation of the Biaxial Stress Effect on Efficiency Droop in GaN-based Light-emitting Diode under Electrical Injection.

PubMed

Zheng, Jinjian; Li, Shuiqing; Chou, Chilun; Lin, Wei; Xun, Feilin; Guo, Fei; Zheng, Tongchang; Li, Shuping; Kang, Junyong

2015-12-04

Light-emitting diode (LED) efficiency has attracted considerable interest because of the extended use of solid-state lighting. Owing to lack of direct measurement, identification of the reasons for efficiency droop has been restricted. A direct measurement technique is developed in this work for characterization of biaxial stress in GaN-based blue LEDs under electrical injection. The Raman shift of the GaN E2 mode evidently decreases by 4.4 cm(-1) as the driving current on GaN-based LEDs increases to 700 mA. Biaxial compressive stress is released initially and biaxial tensile stress builds up as the current increases with respect to the value of stress-free GaN. First-principles calculations reveal that electron accumulation is responsible for the stress variation in InxGa1-xN/GaN quantum wells, and then reduces the transition probability among quantum levels. This behavior is consistent with the measured current-dependent external quantum efficiency. The rule of biaxial stress-dependent efficiency is further validated by controlling the biaxial stress of GaN-based LEDs with different sapphire substrate thicknesses. This work provides a method for direct observation of the biaxial stress effect on efficiency droop in LEDs under electrical injection.

Direct Observation of the Biaxial Stress Effect on Efficiency Droop in GaN-based Light-emitting Diode under Electrical Injection

PubMed Central

Zheng, Jinjian; Li, Shuiqing; Chou, Chilun; Lin, Wei; Xun, Feilin; Guo, Fei; Zheng, Tongchang; Li, Shuping; Kang, Junyong

2015-01-01

Light-emitting diode (LED) efficiency has attracted considerable interest because of the extended use of solid-state lighting. Owing to lack of direct measurement, identification of the reasons for efficiency droop has been restricted. A direct measurement technique is developed in this work for characterization of biaxial stress in GaN-based blue LEDs under electrical injection. The Raman shift of the GaN E2 mode evidently decreases by 4.4 cm−1 as the driving current on GaN-based LEDs increases to 700 mA. Biaxial compressive stress is released initially and biaxial tensile stress builds up as the current increases with respect to the value of stress-free GaN. First-principles calculations reveal that electron accumulation is responsible for the stress variation in InxGa1−xN/GaN quantum wells, and then reduces the transition probability among quantum levels. This behavior is consistent with the measured current-dependent external quantum efficiency. The rule of biaxial stress-dependent efficiency is further validated by controlling the biaxial stress of GaN-based LEDs with different sapphire substrate thicknesses. This work provides a method for direct observation of the biaxial stress effect on efficiency droop in LEDs under electrical injection. PMID:26634816

The Relationship of On-Call Work with Fatigue, Work-Home Interference, and Perceived Performance Difficulties.

PubMed

Ziebertz, Carla M; van Hooff, Madelon L M; Beckers, Debby G J; Hooftman, Wendela E; Kompier, Michiel A J; Geurts, Sabine A E

2015-01-01

This study examined the relationship between on-call duty exposure (active and total on-call hours a month, number of calls per duty) and employees' experiences of being on-call (stress due to unpredictability, ability to relax during inactive on-call periods, restrictions during on-call duties, on-call work demands, and satisfaction with compensation for on-call duties) on the one hand and fatigue, strain-based and time-based work-home interference (WHI), and perceived on-call performance difficulties (PPD) on the other hand. Cross-sectional survey data were collected among a large heterogeneous sample of Dutch employees (N = 5437). The final sample consisted of 157 on-call workers (23-69 years, 71% males). Data were analyzed by means of hierarchical regression analyses (controlling for age and job characteristics). Differences in on-call work exposure were not systematically related to fatigue, WHI, and PPD (all p's >0.50). The experience of being on-call explained a medium proportion of the variation in fatigue and strain-based WHI and a medium to large proportion of the variation in time-based WHI and PPD over and above the control variables. Our results suggest that it is employees' experience of being on-call, especially the experience of stress due to the unpredictability, rather than the amount of exposure, that is related to fatigue, WHI, and perceived on-call performance difficulties.

Genetic variation in heat-stress tolerance among South American Drosophila populations.

PubMed

Fallis, Lindsey C; Fanara, Juan Jose; Morgan, Theodore J

2011-10-01

Spatial or temporal differences in environmental variables, such as temperature, are ubiquitous in nature and impose stress on organisms. This is especially true for organisms that are isothermal with the environment, such as insects. Understanding the means by which insects respond to temperature and how they will react to novel changes in environmental temperature is important for understanding the adaptive capacity of populations and to predict future trajectories of evolutionary change. The organismal response to heat has been identified as an important environmental variable for insects that can dramatically influence life history characters and geographic range. In the current study we surveyed the amount of variation in heat tolerance among Drosophila melanogaster populations collected at diverse sites along a latitudinal gradient in Argentina (24°-38°S). This is the first study to quantify heat tolerance in South American populations and our work demonstrates that most of the populations surveyed have abundant within-population phenotypic variation, while still exhibiting significant variation among populations. The one exception was the most heat tolerant population that comes from a climate exhibiting the warmest annual mean temperature. All together our results suggest there is abundant genetic variation for heat-tolerance phenotypes within and among natural populations of Drosophila and this variation has likely been shaped by environmental temperature.

Genomic structural variation contributes to phenotypic change of industrial bioethanol yeast Saccharomyces cerevisiae.

PubMed

Zhang, Ke; Zhang, Li-Jie; Fang, Ya-Hong; Jin, Xin-Na; Qi, Lei; Wu, Xue-Chang; Zheng, Dao-Qiong

2016-03-01

Genomic structural variation (GSV) is a ubiquitous phenomenon observed in the genomes of Saccharomyces cerevisiae strains with different genetic backgrounds; however, the physiological and phenotypic effects of GSV are not well understood. Here, we first revealed the genetic characteristics of a widely used industrial S. cerevisiae strain, ZTW1, by whole genome sequencing. ZTW1 was identified as an aneuploidy strain and a large-scale GSV was observed in the ZTW1 genome compared with the genome of a diploid strain YJS329. These GSV events led to copy number variations (CNVs) in many chromosomal segments as well as one whole chromosome in the ZTW1 genome. Changes in the DNA dosage of certain functional genes directly affected their expression levels and the resultant ZTW1 phenotypes. Moreover, CNVs of large chromosomal regions triggered an aneuploidy stress in ZTW1. This stress decreased the proliferation ability and tolerance of ZTW1 to various stresses, while aneuploidy response stress may also provide some benefits to the fermentation performance of the yeast, including increased fermentation rates and decreased byproduct generation. This work reveals genomic characters of the bioethanol S. cerevisiae strain ZTW1 and suggests that GSV is an important kind of mutation that changes the traits of industrial S. cerevisiae strains. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Determinants of the variations in self-reported health status among recent and more established immigrants in Canada.

PubMed

Subedi, Rajendra Prasad; Rosenberg, Mark Warren

2014-08-01

Studies have shown that immigrants are normally in better health on arrival compared to their Canadian-born counterparts. However, the health conditions of new immigrants deteriorate after a few years of their arrival in Canada. This phenomenon is popularly termed the "healthy immigrant effect" (HIE) in the immigrant health literature. Although different hypotheses have been proposed to understand HIE, the causes are subject to ongoing discussion. Unlike previous studies, this study explored the possible causes behind the variations in the health status of recent and more established immigrants comparing 2001 and 2010 Canadian Community Health Surveys (CCHS). Four different hypotheses - namely lifestyle change, barriers to health care services, poor social determinants of health, and work related stress - were tested to understand variations in health status. The study concludes that there is a statistically significant difference in the socioeconomic characteristics and health outcomes of immigrants having less than and more than 10 years of residency in Canada. Logistic regression models show that the health conditions of immigrants are associated with age, sex, ethnic origin, smoking habit, Body Mass Index (BMI), total household income, number of consultations made with a family doctor per year and work related stress. Copyright © 2014 Elsevier Ltd. All rights reserved.

Application of the Mathar Method to Identify Internal Stress Variation in Steel as a Welding Process Result

NASA Astrophysics Data System (ADS)

Kowalski, Dariusz

2017-06-01

The paper deals with the method to identify internal stresses in two-dimensional steel members. Steel members were investigated in the delivery stage and after assembly, by means of electric-arc welding. In order to perform the member assessment two methods to identify the stress variation were applied. The first is a non-destructive measurement method employing local external magnetic field and to detecting the induced voltage, including Barkhausen noise The analysis of the latter allows to assess internal stresses in a surface layer of the material. The second method, essential in the paper, is a semi-trepanation Mathar method of tensometric strain variation measurement in the course of a controlled void-making in the material. Variation of internal stress distribution in the material led to the choice of welding technology to join. The assembly process altered the actual stresses and made up new stresses, triggering post-welding stresses as a response for the excessive stress variation.

Natural variation of root hydraulics in Arabidopsis grown in normal and salt-stressed conditions.

PubMed

Sutka, Moira; Li, Guowei; Boudet, Julie; Boursiac, Yann; Doumas, Patrick; Maurel, Christophe

2011-03-01

To gain insights into the natural variation of root hydraulics and its molecular components, genotypic differences related to root water transport and plasma membrane intrinsic protein (PIP) aquaporin expression were investigated in 13 natural accessions of Arabidopsis (Arabidopsis thaliana). The hydraulic conductivity of excised root systems (Lpr) showed a 2-fold variation among accessions. The contribution of aquaporins to water uptake was characterized using as inhibitors mercury, propionic acid, and azide. The aquaporin-dependent and -independent paths of water transport made variable contributions to the total hydraulic conductivity in the different accessions. The distinct suberization patterns observed among accessions were not correlated with their root hydraulic properties. Real-time reverse transcription-polymerase chain reaction revealed, by contrast, a positive overall correlation between Lpr and certain highly expressed PIP transcripts. Root hydraulic responses to salt stress were characterized in a subset of five accessions (Bulhary-1, Catania-1, Columbia-0, Dijon-M, and Monte-Tosso-0 [Mr-0]). Lpr was down-regulated in all accessions except Mr-0. In Mr-0 and Catania-1, cortical cell hydraulic conductivity was unresponsive to salt, whereas it was down-regulated in the three other accessions. By contrast, the five accessions showed qualitatively similar aquaporin transcriptional profiles in response to salt. The overall work provides clues on how hydraulic regulation allows plant adaptation to salt stress. It also shows that a wide range of root hydraulic profiles, as previously reported in various species, can be observed in a single model species. This work paves the way for a quantitative genetics analysis of root hydraulics.

Natural Variation of Root Hydraulics in Arabidopsis Grown in Normal and Salt-Stressed Conditions1[C][W

PubMed Central

Sutka, Moira; Li, Guowei; Boudet, Julie; Boursiac, Yann; Doumas, Patrick; Maurel, Christophe

2011-01-01

To gain insights into the natural variation of root hydraulics and its molecular components, genotypic differences related to root water transport and plasma membrane intrinsic protein (PIP) aquaporin expression were investigated in 13 natural accessions of Arabidopsis (Arabidopsis thaliana). The hydraulic conductivity of excised root systems (Lpr) showed a 2-fold variation among accessions. The contribution of aquaporins to water uptake was characterized using as inhibitors mercury, propionic acid, and azide. The aquaporin-dependent and -independent paths of water transport made variable contributions to the total hydraulic conductivity in the different accessions. The distinct suberization patterns observed among accessions were not correlated with their root hydraulic properties. Real-time reverse transcription-polymerase chain reaction revealed, by contrast, a positive overall correlation between Lpr and certain highly expressed PIP transcripts. Root hydraulic responses to salt stress were characterized in a subset of five accessions (Bulhary-1, Catania-1, Columbia-0, Dijon-M, and Monte-Tosso-0 [Mr-0]). Lpr was down-regulated in all accessions except Mr-0. In Mr-0 and Catania-1, cortical cell hydraulic conductivity was unresponsive to salt, whereas it was down-regulated in the three other accessions. By contrast, the five accessions showed qualitatively similar aquaporin transcriptional profiles in response to salt. The overall work provides clues on how hydraulic regulation allows plant adaptation to salt stress. It also shows that a wide range of root hydraulic profiles, as previously reported in various species, can be observed in a single model species. This work paves the way for a quantitative genetics analysis of root hydraulics. PMID:21212301

Sleep, Dietary, and Exercise Behavioral Clusters among Truck Drivers with Obesity: Implications for Interventions

PubMed Central

Olson, Ryan; Thompson, Sharon V.; Wipfli, Brad; Hanson, Ginger; Elliot, Diane L.; Anger, W. Kent; Bodner, Todd; Hammer, Leslie B.; Hohn, Elliot; Perrin, Nancy A.

2015-01-01

Objective Our objectives were to describe a sample of truck drivers, identify clusters of drivers with similar patterns in behaviors affecting energy balance (sleep, diet, and exercise), and test for cluster differences in health and psychosocial factors. Methods Participants’ (n=452, BMI M=37.2, 86.4% male) self-reported behaviors were dichotomized prior to hierarchical cluster analysis, which identified groups with similar behavior co-variation. Cluster differences were tested with generalized estimating equations. Results Five behavioral clusters were identified that differed significantly in age, smoking status, diabetes prevalence, lost work days, stress, and social support, but not in BMI. Cluster 2, characterized by the best sleep quality, had significantly lower lost workdays and stress than other clusters. Conclusions Weight management interventions for drivers should explicitly address sleep, and may be maximally effective after establishing socially supportive work environments that reduce stress exposures. PMID:26949883

Intrinsic stress in ZrN thin films: Evaluation of grain boundary contribution from in situ wafer curvature and ex situ x-ray diffraction techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koutsokeras, L. E.; Department of Materials Science and Engineering, University of Ioannina, Ioannina 45110; Abadias, G.

2012-05-01

Low-mobility materials, like transition metal nitrides, usually undergo large residual stress when sputter-deposited as thin films. While the origin of stress development has been an active area of research for high-mobility materials, atomistic processes are less understood for low-mobility systems. In the present work, the contribution of grain boundary to intrinsic stress in reactively magnetron-sputtered ZrN films is evaluated by combining in situ wafer curvature measurements, providing information on the overall biaxial stress, and ex situ x-ray diffraction, giving information on elastic strain (and related stress) inside crystallites. The thermal stress contribution was also determined from the in situ stressmore » evolution during cooling down, after deposition was stopped. The stress data are correlated with variations in film microstructure and growth energetics, in the 0.13-0.42 Pa working pressure range investigated, and discussed based on existing stress models. At low pressure (high energetic bombardment conditions), a large compressive stress is observed due to atomic peening, which induces defects inside crystallites but also promotes incorporation of excess atoms in the grain boundary. Above 0.3-0.4 Pa, the adatom surface mobility is reduced, leading to the build-up of tensile stress resulting from attractive forces between under-dense neighbouring column boundary and possible void formation, while crystallites can still remain under compressive stress.« less

Optimization of residual stresses in MMC's through the variation of interfacial layer architectures and processing parameters

NASA Technical Reports Server (NTRS)

Pindera, Marek-Jerzy; Salzar, Robert S.

1996-01-01

The objective of this work was the development of efficient, user-friendly computer codes for optimizing fabrication-induced residual stresses in metal matrix composites through the use of homogeneous and heterogeneous interfacial layer architectures and processing parameter variation. To satisfy this objective, three major computer codes have been developed and delivered to the NASA-Lewis Research Center, namely MCCM, OPTCOMP, and OPTCOMP2. MCCM is a general research-oriented code for investigating the effects of microstructural details, such as layered morphology of SCS-6 SiC fibers and multiple homogeneous interfacial layers, on the inelastic response of unidirectional metal matrix composites under axisymmetric thermomechanical loading. OPTCOMP and OPTCOMP2 combine the major analysis module resident in MCCM with a commercially-available optimization algorithm and are driven by user-friendly interfaces which facilitate input data construction and program execution. OPTCOMP enables the user to identify those dimensions, geometric arrangements and thermoelastoplastic properties of homogeneous interfacial layers that minimize thermal residual stresses for the specified set of constraints. OPTCOMP2 provides additional flexibility in the residual stress optimization through variation of the processing parameters (time, temperature, external pressure and axial load) as well as the microstructure of the interfacial region which is treated as a heterogeneous two-phase composite. Overviews of the capabilities of these codes are provided together with a summary of results that addresses the effects of various microstructural details of the fiber, interfacial layers and matrix region on the optimization of fabrication-induced residual stresses in metal matrix composites.

Linear enamel hypoplasia as an indicator of physiological stress in great apes: reviewing the evidence in light of enamel growth variation.

PubMed

Guatelli-Steinberg, Debbie; Ferrell, Rebecca J; Spence, Jennifer

2012-06-01

Physiological stress, such as malnutrition or illness, can disrupt normal enamel growth, resulting in linear enamel hypoplasias (LEHs). Although ecological factors may contribute to LEH expression, other factors, such as surface abrasion and enamel growth variables, are also likely to be involved. Attention to these other factors is necessary before we can begin to understand what LEH might signify in terms of ecological sources of physiological stress in non-human primates. This study focuses on assessing the contribution of these other factors to variation in LEH expression within and across great ape taxa. Here, we present LEH data from unabraded crown regions in samples of seven great ape species. We analyze these data with respect to lateral enamel formation time and the angles that striae of Retzius make with the enamel surface, as these variables are expected to affect variation in LEH expression. We find that although the duration of enamel formation is associated with sex differences in LEH expression, it is not clearly related to taxonomic variation in LEH expression, and does not explain the low frequency of LEH in mountain gorillas found in this and a previous study. Our data on striae of Retzius angles suggest that these influence LEH expression along the tooth crown and may contribute to the consistently high frequencies of LEH seen in Pongo in this and previous studies. We suggest that future work aimed at understanding species variation in these angles is crucial to evaluating taxonomic patterns of LEH expression in great apes. Copyright © 2012 Wiley Periodicals, Inc.

Enhanced converse magnetoelectric effect in cylindrical piezoelectric-magnetostrictive composites

NASA Astrophysics Data System (ADS)

Wu, Gaojian; Zhang, Ru; Zhang, Ning

2016-10-01

Enhanced converse magnetoelectric (ME) effect has been experimentally observed in cylindrical PZT-Terfenol-D piezoelectric-magnetostrictive bilayered composites, where the piezoelectric and magnetostrictive components are coupled through normal stresses instead of shear stresses that act in most of previous multiferroic composites. A theoretical model based on elastodynamics analysis has been proposed to describe the frequency response of converse ME effect for axial and radial modes in the bilayered cylindrical composites. The theory shows good agreement with the experimental results. The different variation tendency of resonant converse ME coefficient, as well as different variation rate of resonance frequency with bias magnetic field for axial and radial modes is interpreted in terms of demagnetizing effect. This work is of theoretical and technological significance for the application of converse ME effect as magnetic sensor, transducers, coil-free flux switch, etc.

Temperature and electrical memory of polymer fibers

NASA Astrophysics Data System (ADS)

Yuan, Jinkai; Zakri, Cécile; Grillard, Fabienne; Neri, Wilfrid; Poulin, Philippe

2014-05-01

We report in this work studies of the shape memory behavior of polymer fibers loaded with carbon nanotubes or graphene flakes. These materials exhibit enhanced shape memory properties with the generation of a giant stress upon shape recovery. In addition, they exhibit a surprising temperature memory with a peak of generated stress at a temperature nearly equal to the temperature of programming. This temperature memory is ascribed to the presence of dynamical heterogeneities and to the intrinsic broadness of the glass transition. We present recent experiments related to observables other than mechanical properties. In particular nanocomposite fibers exhibit variations of electrical conductivity with an accurate memory. Indeed, the rate of conductivity variations during temperature changes reaches a well defined maximum at a temperature equal to the temperature of programming. Such materials are promising for future actuators that couple dimensional changes with sensing electronic functionalities.

Mechanical stress modified ferroelectric aging behavior

NASA Astrophysics Data System (ADS)

Xu, Tingting; Kan, Yi; Jin, Yaming; Sun, Hui; Du, Yingchao; Wu, Xiumei; Bo, Huifeng; Cai, Wei; Huang, Fengzhen; Lu, Xiaomei; Zhu, Jinsong

2013-05-01

Mechanical stress effect on aging behavior of Bi3.25La0.75Ti3O12 (BLT) and PbZr0.53Ti0.47O3 (PZT) films was investigated. It is found that the remnant polarization decreases with time while the coercive field increases in stress-free BLT films. For unconfined PZT films, both the remnant polarization and the coercive field decrease as time elapses. The applied tensile stress weakens the aging of remnant polarization of BLT films but strengthens the aging of coercive field, while the applied tensile stress possesses opposite effect. In contrary, the applied compressive stress simultaneously improves the aging behavior of both remnant polarization and coercive field of PZT films. Mechanical-stress-induced variation of domain wall mobility in different materials was suggested as the possible origin of these observations. This work indicates that the aging behavior modification using stress could be realized, and it is helpful for promoting the reliability of ferroelectric films for industrial applications.

A model for prediction of profile and flatness of hot and cold rolled flat products in four-high mills

NASA Astrophysics Data System (ADS)

Overhagen, Christian; Mauk, Paul Josef

2018-05-01

For flat rolled products, the thickness profile in the transversal direction is one of the most important product properties. For further processing, a defined crown of the product is necessary. In the rolling process, several mechanical and thermal influences interact with each other to form the strip shape at the roll gap exit. In the present analysis, a process model for rolling of strip and sheet is presented. The core feature of the process model is a two-dimensional stress distribution model based on von Karman's differential equation. Sub models for the mechanical influences of work roll flattening as well as work and backup roll deflection and the thermal influence of work roll expansion have been developed or extended. The two-dimensional stress distribution serves as an input parameter for the roll deformation models. For work roll flattening, a three-dimensional model based on the Boussinesq problem is adopted, while the work and backup roll deflection, including contact flattening is calculated by means of finite beam elements. The thermal work roll crown is calculated with help of an axisymmetric numerical solution of the heat equation for the work roll, considering azimuthal averaging for the boundary conditions at the work roll surface. Results are presented for hot rolling of a strip in a seven-stand finishing train of a hot strip mill, showing the calculated evolution of the strip profile. A variation of the strip profile from the first to the 20th rolled strip is shown. This variation is addressed to the progressive increase of work roll temperature during the first 20 strips. It is shown that a CVC® system can lead to improvements in strip profile and therefore flatness.

Heritability and Temporal Stability of Ambulatory Autonomic Stress Reactivity in Unstructured 24-Hour Recordings.

PubMed

Neijts, Melanie; van Lien, Rene; Kupper, Nina; Boomsma, Dorret; Willemsen, Gonneke; de Geus, Eco J C

2015-10-01

Measurements of ambulatory autonomic reactivity can help with our understanding of the long-term health consequences of exposure to psychosocial stress in real-life settings. In this study, unstructured 24-hour ambulatory recordings of cardiac parasympathetic and sympathetic control were obtained in 1288 twins and siblings, spanning both work time and leisure time. These data were used to define two ambulatory baseline (sleep, leisure) and four stress conditions (wake, work, work_sitting, work_peak) from which six ambulatory stress reactivity measures were derived. The use of twin families allowed for estimation of heritability and testing for the amplification of existing or emergence of new genetic variance during stress compared with baseline conditions. Temporal stability of ambulatory reactivity was assessed in 62 participants and was moderate to high over a 3-year period (0.36 < r < 0.91). Depending on the definition of ambulatory reactivity used, significant heritability was found, ranging from 29% to 40% for heart rate, 34% to 47% for cardiac parasympathetic control (indexed as respiratory sinus arrhythmia), and 10% to 19% for cardiac sympathetic control (indexed as the preejection period). Heritability of ambulatory reactivity was largely due to newly emerging genetic variance during stress compared with periods of rest. Interestingly, reactivity to short standardized stressors was poorly correlated with the ambulatory reactivity measures implying poor laboratory-real-life correspondence. Ambulatory autonomic reactivity extracted from an unstructured real-life setting shows reliable, stable, and heritable individual differences. Real-life situations uncover a new and different genetic variation compared with that seen in resting baseline conditions, including sleep.

[A study of relationship between occupational stress and diseases in secondary school teachers].

PubMed

Zhang, Yang; Zhu, Tao; Tang, Liu; Li, Jian; Lan, Yajia

2015-10-01

To analyze the relationship between occupational stress and diseases in secondary school teachers in a city of Sichuan Province, and to provide a basis for the evaluation of the long-term effects of occupational stress in teachers. With secondary school teachers as the target population, the stratified cluster sampling was adopted to conduct three studies among 780, 119, and 689 secondary school teachers in a city of Sichuan Province in 1999, 2005, and 2009, respectively. The Occupational Stress Inventory-Revised Edition (OSI-R) and working ability index (WAI) were used to investigate occupational stress and diseases in secondary school teachers. The variation of occupational stress in secondary school teachers was compared between different periods and the relationship between the intensity of stress and diseases was evaluated, on the basis of which the variation of the relationship over time was analyzed. There were significant differences in occupational stress in secondary school teachers between different periods (P<0.05). The incidence rates of medium and high physiological stress and psychological stress were significantly higher in 2009 than in 1999 (P<0.05). Compared with the year of 1999, the intensity of occupational stress in 2009 changed with cardiovascular, respiratory, and mental diseases. The incidence of abnormal psychological stress was a risk factor for all chronic, respiratory, and mental diseases (OR: 1.88, 2.25, and 5.91). The time dependence of odds ratio was only found in the risk of respiratory diseases: occupational stress resulted in a significant increase in the risk of respiratory diseases over time (P<0.05). Physiological stress was a risk factor for mental diseases (OR=2.31). The intensity of occupational stress in secondary school teachers changes over time. Occupational stress elevates the risks of certain diseases and has a time-dependent effect on the risk of respiratory diseases. Occupational stress in secondary school teachers needs more attention and effective prevention.

Understanding of the development of in-plane residual stress in sol-gel-derived metal oxide thin films

NASA Astrophysics Data System (ADS)

Ohno, Kentaro; Uchiyama, Hiroaki; Kozuka, Hiromitsu

2012-01-01

The in-plane residual stress in thin films greatly affects their properties and functionality as well as the substrate bending, and hence is an important factor to be controlled. In order to obtain general knowledge on the development of residual stress in sol-gel-derived oxide thin films, the in-plane residual stress was measured for yttria stabilized zirconia gel films on Si(100) wafers as a function of firing temperature by measuring the substrate curvature. The films showed a rather complex variation in residual stress, and the mechanism of the residual stress evolution was discussed, referencing the intrinsic stress and the x-ray diffraction data. At low annealing temperatures of 100-200 °C, the residual tensile stress decreased and became compressive partially due to the structural relaxation occurring during cooling. When the firing temperature was increased over 200 °C, the residual stress turned tensile, and increased with increasing annealing temperature, which was attributed to the increase in intrinsic stress due to film densification as well as to the reduced structural relaxation due to the progress of densification. The residual tensile stress slightly decreased at firing temperatures of 500-600 °C, which was attributed to the reduction in intrinsic stress due to thermally activated atomic diffusion as well as to emergence of thermal stress. At firing temperature over 600 °C, the residual tensile stress increased again, which was attributed to the increase in thermal stress generated during cooling due to the increased Young's modulus of the film. Although appearing to be complicated, the whole variation of residual stress with firing temperature could be understood in terms of film densification, structural relaxation, atomic diffusion, progress of crystallization and thermal strain. The illustration presented in the work may provide a clear insight on how the residual stress could be developed in a variety of functional sol-gel-derived, crystalline oxide thin films.

Temporal versus spatial variation in leaf reflectance under changing water stress conditions

NASA Technical Reports Server (NTRS)

Cohen, Warren B.

1991-01-01

Leaf reflectance changes associated with changes in water stress were analyzed in two separate experiments. Results indicate that the variation in reflectance among collections of leaves of a given species all at the same level of water stress is at least as great as the variation in reflectance associated with changes in water stress for a given leaf collection of that species. The implications is that results from leaf reflectance-water stress studies have only limited applicability to the remote sensing of plant canopy water stress.

Specifying initial stress for dynamic heterogeneous earthquake source models

USGS Publications Warehouse

Andrews, D.J.; Barall, M.

2011-01-01

Dynamic rupture calculations using heterogeneous stress drop that is random and self-similar with a power-law spatial spectrum have great promise of producing realistic ground-motion predictions. We present procedures to specify initial stress for random events with a target rupture length and target magnitude. The stress function is modified in the depth dimension to account for the brittle-ductile transition at the base of the seismogenic zone. Self-similar fluctuations in stress drop are tied in this work to the long-wavelength stress variation that determines rupture length. Heterogeneous stress is related to friction levels in order to relate the model to physical concepts. In a variant of the model, there are high-stress asperities with low background stress. This procedure has a number of advantages: (1) rupture stops naturally, not at artificial barriers; (2) the amplitude of short-wavelength fluctuations of stress drop is not arbitrary: the spectrum is fixed to the long-wavelength fluctuation that determines rupture length; and (3) large stress drop can be confined to asperities occupying a small fraction of the total rupture area, producing slip distributions with enhanced peaks.

The Relationship of On-Call Work with Fatigue, Work-Home Interference, and Perceived Performance Difficulties

PubMed Central

Ziebertz, Carla M.; van Hooff, Madelon L. M.; Beckers, Debby G. J.; Hooftman, Wendela E.; Kompier, Michiel A. J.; Geurts, Sabine A. E.

2015-01-01

Objectives. This study examined the relationship between on-call duty exposure (active and total on-call hours a month, number of calls per duty) and employees' experiences of being on-call (stress due to unpredictability, ability to relax during inactive on-call periods, restrictions during on-call duties, on-call work demands, and satisfaction with compensation for on-call duties) on the one hand and fatigue, strain-based and time-based work-home interference (WHI), and perceived on-call performance difficulties (PPD) on the other hand. Methods. Cross-sectional survey data were collected among a large heterogeneous sample of Dutch employees (N = 5437). The final sample consisted of 157 on-call workers (23–69 years, 71% males). Data were analyzed by means of hierarchical regression analyses (controlling for age and job characteristics). Results. Differences in on-call work exposure were not systematically related to fatigue, WHI, and PPD (all p's >0.50). The experience of being on-call explained a medium proportion of the variation in fatigue and strain-based WHI and a medium to large proportion of the variation in time-based WHI and PPD over and above the control variables. Conclusions. Our results suggest that it is employees' experience of being on-call, especially the experience of stress due to the unpredictability, rather than the amount of exposure, that is related to fatigue, WHI, and perceived on-call performance difficulties. PMID:26558276

Gender and stress perception based differences in BMI, hormonal response and appetite in adult Pakistani population.

PubMed

Haque, Zeba; Javed, Anum; Mehmood, Ahmar; Haque, Adiya; Haleem, Darakhshan J

2014-10-01

To evaluate and compare the gender based variations in stress perception induced changes in leptin, cortisol and serotonin (5-HT) trends, appetite and Body Mass Index (BMI). An analytical comparative study. Neurochemistry Laboratory, University of Karachi, from January to August 2013. Appetite, BMI and serum leptin, cortisol, and 5-HT were measured in 100 men and women of aged 30-60 years, working in teaching institutes of Karachi, to evaluate gender based, stress perception induced variations. The samples were identified by stratified random technique. The chemical variables were estimated through ELISA. RESULTS were analysed using one-way ANOVA and multivariate general linear model using SPSS version 17. Mean stress perception, BMI and serum leptin levels were significantly more in women (p<0.05). Serum cortisol and 5-HT were found significantly reduced in women (p<0.05). BMI, serum cortisol and leptin were found to be increased with increasing level of stress perception (p<0.05). VAS for hunger and desire to eat as the measure of appetite was significantly higher in men (p<0.05). Stress perception attenuates the positive effect of cortisol and negative effects of leptin and 5-HT on appetite through changes in their circulatory levels. Women perceive more stress and exhibit significantly attenuated changes in hormonal levels and appetite which may be the contributing factor towards obesity. Increased BMI in women despite decreased appetite merits more studies.

Fractal nature of aluminum alloys substructures under creep and its implications

NASA Astrophysics Data System (ADS)

Fernández, R.; Bruno, G.; González-Doncel, G.

2018-04-01

The present work offers an explanation for the variation of the power-law stress exponent, n, with the stress σ normalized to the shear modulus G in aluminum alloys. The approach is based on the assumption that the dislocation structure generated with deformation has a fractal nature. It fully explains the evolution of n with σ/G even beyond the so-called power law breakdown region. Creep data from commercially pure Al99.8%, Al-3.85%Mg, and ingot AA6061 alloy tested at different temperatures and stresses are used to validate the proposed ideas. Finally, it is also shown that the fractal description of the dislocation structure agrees well with current knowledge.

Monitoring stress changes in a concrete bridge with coda wave interferometry.

PubMed

Stähler, Simon Christian; Sens-Schönfelder, Christoph; Niederleithinger, Ernst

2011-04-01

Coda wave interferometry is a recent analysis method now widely used in seismology. It uses the increased sensitivity of multiply scattered elastic waves with long travel-times for monitoring weak changes in a medium. While its application for structural monitoring has been shown to work under laboratory conditions, the usability on a real structure with known material changes had yet to be proven. This article presents experiments on a concrete bridge during construction. The results show that small velocity perturbations induced by a changing stress state in the structure can be determined even under adverse conditions. Theoretical estimations based on the stress calculations by the structural engineers are in good agreement with the measured velocity variations.

Firn thickness variations across the Northeast Greenland Ice Stream margins indicating nonlinear densification rates

NASA Astrophysics Data System (ADS)

Riverman, K. L.; Anandakrishnan, S.; Alley, R. B.; Peters, L. E.; Christianson, K. A.; Muto, A.

2013-12-01

Northeast Greenland Ice Stream (NEGIS) is the largest ice stream in Greenland, draining approximately 8.4% of the ice sheet's area. The flow pattern and stability mechanism of this ice stream are unique to others in Greenland and Antarctica, and merit further study to ascertain the sensitivity of this ice stream to future climate change. Geophysical methods are valuable tools for this application, but their results are sensitive to the structure of the firn and any spatial variations in firn properties across a given study region. Here we present firn data from a 40-km-long seismic profile across the upper reaches of NEGIS, collected in the summer of 2012 as part of an integrated ground-based geophysical survey. We find considerable variations in firn thickness that are coincident with the ice stream shear margins, where a thinner firn layer is present within the margins, and a thicker, more uniform firn layer is present elsewhere in our study region. Higher accumulation rates in the marginal surface troughs due to drift-snow trapping can account for some of this increased densification; however, our seismic results also highlight enhanced anisotropy within the firn and upper ice column that is confined to narrow bands within the shear margins. We thus interpret these large firn thickness variations and abrupt changes in anisotropy as indicators of firn densification dependent on the effective stress state as well as the overburden pressure, suggesting that the strain rate increases nonlinearly with stress across the shear margins. A GPS strain grid maintained for three weeks across both margins observed strong side shearing, with rapid stretching and then compression along particle paths, indicating large deviatoric stresses in the margins. This work demonstrates the importance of developing a high-resolution firn densification model when conducting geophysical field work in regions possessing a complex ice flow history; it also motivates the need for a more detailed firn densification study along NEGIS to better understand the evolution of these abrupt structural variations within the firn.

Numerical simulation of a relaxation test designed to fit a quasi-linear viscoelastic model for temporomandibular joint discs.

PubMed

Commisso, Maria S; Martínez-Reina, Javier; Mayo, Juana; Domínguez, Jaime

2013-02-01

The main objectives of this work are: (a) to introduce an algorithm for adjusting the quasi-linear viscoelastic model to fit a material using a stress relaxation test and (b) to validate a protocol for performing such tests in temporomandibular joint discs. This algorithm is intended for fitting the Prony series coefficients and the hyperelastic constants of the quasi-linear viscoelastic model by considering that the relaxation test is performed with an initial ramp loading at a certain rate. This algorithm was validated before being applied to achieve the second objective. Generally, the complete three-dimensional formulation of the quasi-linear viscoelastic model is very complex. Therefore, it is necessary to design an experimental test to ensure a simple stress state, such as uniaxial compression to facilitate obtaining the viscoelastic properties. This work provides some recommendations about the experimental setup, which are important to follow, as an inadequate setup could produce a stress state far from uniaxial, thus, distorting the material constants determined from the experiment. The test considered is a stress relaxation test using unconfined compression performed in cylindrical specimens extracted from temporomandibular joint discs. To validate the experimental protocol, the test was numerically simulated using finite-element modelling. The disc was arbitrarily assigned a set of quasi-linear viscoelastic constants (c1) in the finite-element model. Another set of constants (c2) was obtained by fitting the results of the simulated test with the proposed algorithm. The deviation of constants c2 from constants c1 measures how far the stresses are from the uniaxial state. The effects of the following features of the experimental setup on this deviation have been analysed: (a) the friction coefficient between the compression plates and the specimen (which should be as low as possible); (b) the portion of the specimen glued to the compression plates (smaller areas glued are better); and (c) the variation in the thickness of the specimen. The specimen's faces should be parallel to ensure a uniaxial stress state. However, this is not possible in real specimens, and a criterion must be defined to accept the specimen in terms of the specimen's thickness variation and the deviation of the fitted constants arising from such a variation.

Gender, Stress in Childhood and Adulthood, and Trajectories of Change in Body Mass

PubMed Central

Liu, Hui; Umberson, Debra

2015-01-01

Despite substantial evidence of the linkage between stress and weight change, previous studies have not considered how stress trajectories that begin in childhood and fluctuate throughout adulthood may work together to have long-term consequences for weight change. Working from a stress and life course perspective, we investigate the linkages between childhood stress, adulthood stress and trajectories of change in body mass (i.e., Body Mass Index, BMI) over time, with attention to possible gender variation in these processes. Data are drawn from a national longitudinal survey of the Americans’ Changing Lives (N=3,617). Results from growth curve analyses suggest that both women and men who experienced higher levels of childhood stress also report higher levels of stress in adulthood. At the beginning of the study period, higher levels of adulthood stress are related to greater BMI for women but not men. Moreover, women who experienced higher levels of childhood stress gained weight more rapidly throughout the 15-year study period than did women who experienced less childhood stress, but neither childhood nor adulthood stress significantly modified men’s BMI trajectories. These findings add to our understanding of how childhood stress—a more important driver of long-term BMI increase than adult stress—reverberates throughout the life course to foster cumulative disadvantage in body mass, and how such processes differ for men and women. Results highlight the importance of considering sex-specific social contexts of early childhood in order to design effective clinical programs that prevent or treat overweight and obesity later in life. PMID:26151391

Meshless analysis of shear deformable shells: the linear model

NASA Astrophysics Data System (ADS)

Costa, Jorge C.; Tiago, Carlos M.; Pimenta, Paulo M.

2013-10-01

This work develops a kinematically linear shell model departing from a consistent nonlinear theory. The initial geometry is mapped from a flat reference configuration by a stress-free finite deformation, after which, the actual shell motion takes place. The model maintains the features of a complete stress-resultant theory with Reissner-Mindlin kinematics based on an inextensible director. A hybrid displacement variational formulation is presented, where the domain displacements and kinematic boundary reactions are independently approximated. The resort to a flat reference configuration allows the discretization using 2-D Multiple Fixed Least-Squares (MFLS) on the domain. The consistent definition of stress resultants and consequent plane stress assumption led to a neat formulation for the analysis of shells. The consistent linear approximation, combined with MFLS, made possible efficient computations with a desired continuity degree, leading to smooth results for the displacement, strain and stress fields, as shown by several numerical examples.

Relations between mothers' daily work, home, and relationship stress with characteristics of mother-child conflict interactions.

PubMed

Nelson, Jackie A; Boyer, Brittany P; Villarreal, Deyaun L; Smith, Olivia A

2017-06-01

This study examined whether daily variations in levels of mothers' work, home, and relationship stress were related to collaborative and oppositional qualities of mother-child conflict interactions across 1 week. Mothers reported on 1 specific conflict interaction with their 5- to 8-year-old child and their work, home, and relationship stress through online surveys each day for 7 consecutive days. Diary data from 142 mothers were analyzed in 6 multilevel models, each including within- and between-family levels of a stressor predicting collaborative or oppositional conflict qualities. Results suggested that families in the sample differed from each other, and also varied during the week, in collaborative and oppositional conflict qualities as well as stress in all 3 domains. Mothers reported a greater degree of oppositional conflict qualities on days characterized by higher perceptions of home chaos. Additionally, mothers who reported higher average levels of negativity in romantic relationships endorsed oppositional conflict qualities to a greater extent than mothers with lower relationship negativity. Two multilevel models including all 3 stressors in relation to collaborative and oppositional conflict revealed that for mothers managing multiple roles, average romantic relationship stress was the most important unique contributor to mother-child conflict qualities and daily relationship stress was particularly influential among mothers with sons compared to those with daughters. Results support the spillover hypothesis of stress within the family system and are discussed in terms of mothers' coping mechanisms and emotional engagement. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Measuring depth profiles of residual stress with Raman spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Enloe, W.S.; Sparks, R.G.; Paesler, M.A.

Knowledge of the variation of residual stress is a very important factor in understanding the properties of machined surfaces. The nature of the residual stress can determine a part`s susceptibility to wear deformation, and cracking. Raman spectroscopy is known to be a very useful technique for measuring residual stress in many materials. These measurements are routinely made with a lateral resolution of 1{mu}m and an accuracy of 0.1 kbar. The variation of stress with depth; however, has not received much attention in the past. A novel technique has been developed that allows quantitative measurement of the variation of the residualmore » stress with depth with an accuracy of 10nm in the z direction. Qualitative techniques for determining whether the stress is varying with depth are presented. It is also demonstrated that when the stress is changing over the volume sampled, errors can be introduced if the variation of the stress with depth is ignored. Computer aided data analysis is used to determine the depth dependence of the residual stress.« less

Time for Each Other: Work and Family Constraints Among Couples.

PubMed

Flood, Sarah M; Genadek, Katie R

2016-02-01

Little is known about couples' shared time and how actual time spent together is associated with well-being. In this study, the authors investigated how work and family demands are related to couples' shared time (total and exclusive) and individual well-being (happiness, meaningfulness, and stress) when with one's spouse. They used individual-level data from the 2003-2010 American Time Use Survey (N = 46,883), including the 2010 Well-Being Module. The results indicated that individuals in full-time working dual-earner couples spend similar amounts of time together as individuals in traditional breadwinner-homemaker arrangements on weekdays after accounting for daily work demands. The findings also show that parents share significantly less total and exclusive spousal time together than nonparents, though there is considerable variation among parents by age of the youngest child. Of significance is that individuals experience greater happiness and meaning and less stress during time spent with a spouse opposed to time spent apart.

Estimation of metallic structure durability for a known law of stress variation

NASA Astrophysics Data System (ADS)

Mironov, V. I.; Lukashuk, O. A.; Ogorelkov, D. A.

2017-12-01

Overload of machines working in transient operational modes leads to such stresses in their bearing metallic structures that considerably exceed the endurance limit. The estimation of fatigue damages based on linear summation offers a more accurate prediction in terms of machine durability. The paper presents an alternative approach to the estimation of the factors of the cyclic degradation of a material. Free damped vibrations of the bridge girder of an overhead crane, which follow a known logarithmical decrement, are studied. It is shown that taking into account cyclic degradation substantially decreases the durability estimated for a product.

Microstructure characterization and strengthening mechanisms of oxide dispersion strengthened (ODS) Fe-9%Cr and Fe-14%Cr extruded bars

NASA Astrophysics Data System (ADS)

Chauhan, A.; Bergner, F.; Etienne, A.; Aktaa, J.; de Carlan, Y.; Heintze, C.; Litvinov, D.; Hernandez-Mayoral, M.; Oñorbe, E.; Radiguet, B.; Ulbricht, A.

2017-11-01

The collaborative study is focused on the relationship between microstructure and yield stress for an ODS Fe-9%Cr-based transformable alloy and an ODS Fe-14%Cr-based ferritic alloy. The contributions to the total room temperature yield stress arising from various strengthening mechanisms are addressed on the basis of a comprehensive description of the microstructures uncovered by means of transmission electron microscopy (TEM), electron backscatter diffraction (EBSD), small-angle neutron scattering (SANS) and atom probe tomography (APT). While these methods provide a high degree of complementarity, a reasonable agreement was found in cases of overlap of information. The derived set of microstructure parameters along with reported strengthening equations was used to calculate the room temperature yield stress. The estimates were critically compared with the measured yield stress for an extended set of alloys including data reported for Fe-Cr model alloys and steels thus covering one order of magnitude or more in grain size, dislocation density, particle density and yield stress. The comparison shows that particle strengthening, dislocation forest strengthening, and Hall-Petch strengthening are the major contributions and that a mixed superposition rule reproduces the measured yield stress within experimental scatter for the whole extended set of alloys. The wide variation of microstructures additionally underpins the conclusions and goes beyond previous work, in which one or few ODS steels and narrow microstructure variations were typically covered.

Stability analysis of nanoscale surface patterns in stressed solids

NASA Astrophysics Data System (ADS)

Kostyrko, Sergey A.; Shuvalov, Gleb M.

2018-05-01

Here, we use the theory of surface elasticity to extend the morphological instability analysis of stressed solids developed in the works of Asaro, Tiller, Grinfeld, Srolovitz and many others. Within the framework of Gurtin-Murdoch model, the surface phase is assumed to be a negligibly thin layer with the elastic properties which differ from those of the bulk material. We consider the mass transport mechanism driven by the variation of surface and bulk energy along undulated surface of stressed solid. The linearized surface evolution equation is derived in the case of plane strain conditions and describes the amplitude change of surface perturbations with time. A parametric analysis of this equation leads to the definition of critical conditions which depend on undulation wavelength, residual surface stress, applied loading, surface and bulk elastic constants and predict the surface morphological stability.

A New Method of Stress Measurement Based upon Elastic Deformation of Core Sample with Stress Relief by Drilling

NASA Astrophysics Data System (ADS)

Ito, T.; Funato, A.; Tamagawa, T.; Tezuka, K.; Yabe, Y.; Abe, S.; Ishida, A.; Ogasawara, H.

2017-12-01

When rock is cored at depth by drilling, anisotropic expansion occurs with the relief of anisotropic rock stresses, resulting in a sinusoidal variation of core diameter with a period of 180 deg. in the core roll angle. The circumferential variation of core diameter is given theoretically as a function of rock stresses. These new findings can lead various ideas to estimate the rock stress from circumferential variation of core diameter measured after the core retrieving. In the simplest case when a single core sample is only available, the difference between the maximum and minimum components of rock stress in a plane perpendicular to the drilled hole can be estimated from the maximum and minimum core diameters (see the detail in, Funato and Ito, IJRMMS, 2017). The advantages of this method include, (i) much easier measurement operation than those in other in-situ or in-lab estimation methods, and (ii) applicability in high stress environment where stress measurements need pressure for packers or pumping system for the hydro-fracturing methods higher than their tolerance levels. We have successfully tested the method at deep seismogenic zones in South African gold mines, and we are going to apply it to boreholes collared at 3 km depth and intersecting a M5.5 rupture plane several hundred meters below the mine workings in the ICDP project of "Drilling into Seismogenic zones of M2.0 - M5.5 earthquakes in deep South African gold mines" (DSeis) (e.g., http://www.icdp-online.org/projects/world/africa/orkney-s-africa/details/). If several core samples with different orientation are available, all of three principal components of 3D rock stress can be estimated. To realize this, we should have several boreholes drilled in different directions in a rock mass where the stress field is considered to be uniform. It is commonly carried out to dill boreholes in different directions from a mine gallery. Even in a deep borehole drilled vertically from the ground surface, the downhole tool of rotary sidewall coring allows us to take core samples with different orientations at depths of interest from the sidewall of the vertically-drilled borehole. The theoretical relationship between the core expansion and rock stress has been verified through the examination of core samples prepared in laboratory experiments and retrieved field cores.

Stress in nurses: stress-related affect and its determinants examined over the nursing day.

PubMed

Johnston, Derek W; Jones, Martyn C; Charles, Kathryn; McCann, Sharon K; McKee, Lorna

2013-06-01

Nurses are a stressed group and this may affect their health and work performance. The determinants of occupational stress in nurses and other occupational groups have almost invariably been examined in between subject studies. This study aimed to determine if the main determinants of occupation stress, i.e. demand, control, effort and reward, operate within nurses. A real time study using personal digital-assistant-based ecological momentary assessment to measure affect and its hypothesised determinants every 90 min in 254 nurses over three nursing shifts. The measures were negative affect, positive affect, demand/effort, control and reward. While the effects varied in magnitude between people, in general increased negative affect was predicted by high demand/effort, low control and low reward. Control and reward moderated the effects of demand/effort. High positive affect was predicted by high demand/effort, control and reward. The same factors are associated with variations in stress-related affect within nurses as between.

Permanent stress may be the trigger of an acute myocardial infarction on the first work-day of the week.

PubMed

Bodis, Jozsef; Boncz, Imre; Kriszbacher, Ildiko

2010-10-29

Numerous studies have reported the weekly variation of an acute myocardial infarction. The Monday peek has been connected with higher rate of physical and mental, work-related stress. We wished to study the weekly variation of an acute myocardial infarction (AMI) in the group of workers and pensioners, and to find out whether National Holidays on the first day of the week could influence the weekly rhythm of an acute myocardial infarction. We carried out the retrospective analysis of patients admitted to Hungarian hospitals with the diagnose of an AMI (n=90,187) between 2002 and 2007. According to the morbidity data of an AMI, the weekly peek was detected on the first work-day of the week, showing a gradually decreasing tendency until the end of the week. Morbidity rates on Mondays being National Holidays were similar to the number of events on Saturdays and Sundays (Z=-24,431; p<0.001). There was a significant difference between the number of events on work-days and weekends (Z=-27,321; p<0.001). No marked difference was found between workers under the age of 65 and pensioners above the age of 65, or between the two sexes. The results of our study reveal that the occurrence of an AMI shows characteristic changes throughout the days of the week, and the first work-days of the week may be related to higher incidence of an acute myocardial infarction. Crown Copyright © 2009. Published by Elsevier Ireland Ltd. All rights reserved.

Biocompatilibity-related surface characteristics of oxidized NiTi.

PubMed

Danilov, Anatoli; Tuukkanen, Tuomas; Tuukkanen, Juha; Jämsä, Timo

2007-09-15

In the present study, we examined the effect of NiTi oxidation on material surface characteristics related to biocompatibility. Correspondence between electron work function (EWF) and adhesive force predicted by electron theory of adsorption as well as the effect of surface mechanical stress on the adhesive force were studied on the nonoxidized and oxidized at 350, 450, and 600 degrees C NiTi alloy for medical application. The adhesive force generated by the material surface towards the drops of alpha-minimal essential medium (alpha-MEM) was used as a characteristic of NiTi adsorption properties. The study showed that variations in EWF and mechanical stress caused by surface treatment were accompanied by variations in adhesive force. NiTi oxidation at all temperatures used gave rise to decrease in adhesive force and surface stress values in comparison to the nonoxidized state. In contrary, the EWF value revealed increase under the same condition. Variations in surface oxide layer thickness and its phase composition were also followed. The important role of oxide crystallite size in EWF values within the range of crystallite dimensions typical for NiTi surface oxide as an instrument for the fine regulation of NiTi adsorption properties was demonstrated. The comparative oxidation of pure titanium and NiTi showed that the effect of Ni on the EWF value of NiTi surface oxide is negligible. Copyright 2007 Wiley Periodicals, Inc.

Germanium growth on electron beam lithography patterned Si3N4/Si(001) substrate using molecular beam epitaxy

NASA Astrophysics Data System (ADS)

Sarkar, Subhendu Sinha; Katiyar, Ajit K.; Sarkar, Arijit; Dhar, Achintya; Rudra, Arun; Khatri, Ravinder K.; Ray, Samit Kumar

2018-04-01

It is important to investigate the growth dynamics of Ge adatoms under different surface stress regimes of the patterned dielectric to control the selective growth of self-assembled Ge nanostructures on silicon. In the present work, we have studied the growth of Ge by molecular beam epitaxy on nanometer scale patterned Si3N4/Si(001) substrates generated using electron beam lithography. The pitch of the patterns has been varied to investigate its effect on the growth of Ge in comparison to un-patterned Si3N4. For the patterned Si3N4 film, Ge did not desorbed completely from the Si3N4 film and hence no site selective growth pattern is observed. Instead, depending upon the pitch, Ge growth has occurred in different growth modes around the openings in the Si3N4. For the un-patterned substrate, the morphology exhibits the occurrence of uniform 3D clustering of Ge adatoms on Si3N4 film. This variation in the growth modes of Ge is attributed to the variation of residual stress in the Si3N4 film for different pitch of holes, which has been confirmed theoretically through Comsol Multiphysics simulation. The variation in stress for different pitches resulted in modulation of surface energy of the Si3N4 film leading to the different growth modes of Ge.

Elastic Buckling of Orthotropic Plates Under Varying Axial Stresses

NASA Technical Reports Server (NTRS)

Badir, Ashraf; Hu, Hurang; Diallo, Abdouramane

1997-01-01

The elastic buckling load of simply supported rectangular orthotropic plates subjected to a second degree parabolic variation of axial stresses in the longitudinal direction is calculated using analytical methods. The variation of axial stresses is equilibrated by nonuniform shear stresses along the plate edges and transverse normal stresses. The influence of the aspect ratio is examined, and the results are compared with plates subjected to uniform axial stresses.

Variation of hair cortisol concentrations among wild populations of two baboon species (Papio anubis, P. hamadryas) and a population of their natural hybrids.

PubMed

Fourie, Nicolaas H; Jolly, Clifford J; Phillips-Conroy, Jane E; Brown, Janine L; Bernstein, Robin M

2015-07-01

Male olive (Papio anubis) and hamadryas (P. hamadryas) baboons have distinctive sociobehavioral and physical characteristics. In the Awash National Park, Ethiopia, a hybrid population at the contact zone between these two species, exhibits heterogeneous sociobehavioral and physical characteristics. The ambiguity of the hybrid social environment and disruption of parental stress genotypes may be sources of physiological stress for hybrids. We examined levels of chronic stress among males of the three populations and tested the prediction that chronic cortisol levels would be higher among the hybrids. Animals were captured, sampled, and released during the wet season, and a hair sample was taken for assay. Cortisol was extracted from 182 hair samples with methanol and quantified by ELISA. We included age, age class, rainfall variation, and species affiliation in models examining variation in hair cortisol levels. Species and age significantly contributed to models explaining variation in hair cortisol. Infant hypercortisolism was observed in all three groups, and a decline in cortisol through juvenile and adolescent stages, with a subsequent rise in adulthood. This rise occurred earliest in hamadryas, corroborating other evidence of the precocious development of hamadryas baboons. As expected, hybrids had significantly elevated hair cortisol compared with olive baboons and hamadryas, irrespective of age, except for very young animals. Infant hypercortisolism was also less pronounced among hybrids. Species differences and age-related differences in cortisol levels suggest a dysregulated cortisol phenotype in hybrids, and possibly reflect some form of hybrid disadvantage. More work will be required to disentangle the effects of genetic factors and the social environment.

Effect of Thermomechanical Treatment on the Environmentally Induced Cracking Behavior of AA7075 Alloy

NASA Astrophysics Data System (ADS)

Ghosh, Rahul; Venugopal, A.; Sankaravelayudham, P.; Panda, Rajiv; Sharma, S. C.; George, Koshy M.; Raja, V. S.

2015-02-01

The influence of thermomechanical treatment on the stress corrosion cracking behavior of AA7075 aluminum alloy forgings was examined in 3.5% NaCl solution by varying the extent of thermomechanical working imparted to each of the conditions. The results show that inadequate working during billet processing resulted in inferior corrosion and mechanical properties. However, more working with intermediate pre-heating stages also led to precipitation of coarse particles resulting in lowering of mechanical properties marginally and a significant reduction in the general/pitting corrosion resistance. The results obtained in the present study indicate that optimum working with controlled pre-heating levels is needed during forging to achieve the desired properties. It is also demonstrated that AA7075 in the over aged condition does not show any environmental cracking susceptibility in spite of the microstructural variations in terms of size and volume fraction of the precipitates. However, the above microstructural variations definitely affected the pitting corrosion and mechanical properties significantly and hence a strict control over the working and pre-heating stages during billet processing is suggested.

Hsp90 and environmental stress transform the adaptive value of natural genetic variation.

PubMed

Jarosz, Daniel F; Lindquist, Susan

2010-12-24

How can species remain unaltered for long periods yet also undergo rapid diversification? By linking genetic variation to phenotypic variation via environmental stress, the Hsp90 protein-folding reservoir might promote both stasis and change. However, the nature and adaptive value of Hsp90-contingent traits remain uncertain. In ecologically and genetically diverse yeasts, we find such traits to be both common and frequently adaptive. Most are based on preexisting variation, with causative polymorphisms occurring in coding and regulatory sequences alike. A common temperature stress alters phenotypes similarly. Both selective inhibition of Hsp90 and temperature stress increase correlations between genotype and phenotype. This system broadly determines the adaptive value of standing genetic variation and, in so doing, has influenced the evolution of current genomes.

Rising to the challenge: acute stress appraisals and selection centre performance in applicants to postgraduate specialty training in anaesthesia.

PubMed

Roberts, Martin J; Gale, Thomas C E; McGrath, John S; Wilson, Mark R

2016-05-01

The ability to work under pressure is a vital non-technical skill for doctors working in acute medical specialties. Individuals who evaluate potentially stressful situations as challenging rather than threatening may perform better under pressure and be more resilient to stress and burnout. Training programme recruitment processes provide an important opportunity to examine applicants' reactions to acute stress. In the context of multi-station selection centres for recruitment to anaesthesia training programmes, we investigated the factors influencing candidates' pre-station challenge/threat evaluations and the extent to which their evaluations predicted subsequent station performance. Candidates evaluated the perceived stress of upcoming stations using a measure of challenge/threat evaluation-the cognitive appraisal ratio (CAR)-and consented to release their demographic details and station scores. Using regression analyses we determined which candidate and station factors predicted variation in the CAR and whether, after accounting for these factors, the CAR predicted candidate performance in the station. The CAR was affected by the nature of the station and candidate gender, but not age, ethnicity, country of training or clinical experience. Candidates perceived stations involving work related tasks as more threatening. After controlling for candidates' demographic and professional profiles, the CAR significantly predicted station performance: 'challenge' evaluations were associated with better performance, though the effect was weak. Our selection centre model can help recruit prospective anaesthetists who are able to rise to the challenge of performing in stressful situations but results do not support the direct use of challenge/threat data for recruitment decisions.

Correlation of Fiber Composite Tensile Strength with the Ultrasonic Stress Wave Factor

NASA Technical Reports Server (NTRS)

Vary, A.; Lark, R. F.

1978-01-01

An ultrasonic-acoustic technique was used to indicate the strength variations of tensile specimens of a graphite-epoxy composite. A stress wave factor was determined and its value was found to depend on variations of the fiber-resin bonding as well as fiber orientation. The fiber orientations studied were 0 deg (longitudinal), 10 deg (off-axis), 90 deg (transverse), 0 deg + or - 45 deg/0 deg symmetrical, and + or - 45 deg] symmetrical. The stress wave factor can indicate variations of the tensile and shear strengths of composite materials. The stress wave factor was also found to be sensitive to strength variations associated with microporosity and differences in fiber-resin ratio.

Family variation in photosynthesis of 22-year-old black spruce: a test of two models of physiological response to water stress

Treesearch

John E. Major; Kurt H. Johnsen

1996-01-01

Gas exchange and water potential were measured in 22-year-old black spruce (Piceamariana (Mill.) BSP) trees from four full-sib families on two sites (one drier and one wetter) at the Petawawa National Forestry Institute, Ontario. Based on an observed genotype × environment interaction and earlier work with seedlings, a...

Salivary markers of work stress in an emergency team of urban police (1 degree step).

PubMed

Zefferino, R; Facciorusso, A; Lasalvia, M; Narciso, M; Nuzzaco, A; Lucchini, R; L'Abbate, N

2006-01-01

Stress is usually defined as the experience of negative events or the perceptions of distress and negative affect that are associated with the inability to cope with them. The parameter most suitable for large-scale field studies is the determination of endocrine activity by measurement of salivary cortisol. The aim of the present study is to identify the presence of sources of stress in an emergency team of urban police and to objective such stress using the PSS (Professional Stress Scale) test and bioumoral markers as salivary cortisol and interleukin 1 /f (IL-IB). We studied 30 policemen who belonged to an emergency team. Salivary samples were collected at the start and at the end of the work-shift. As control we used the same subjects during the holiday. T test was performed to evaluate the differences between the means, the Chi Square's Test was performed to determine the statistically significant association between PSS subscales and salivary cortisol and ILl-B concentrations. Thirty policeman were evaluated, their mean age was 44,5 years, their mean work experience was 17,1 years. The PSS test indicated high scores in three subscales, they were work load, organizational structure and processes and lack of resources. SALIVARY CORTISOL: The mean concentration at the start of work-shift was higher than at the end of shift-work (p<0,05). T test indicated a statistically significant difference between mean cortisol concentrations at the same hour during the work (start and end) and during the holiday (P<0,05). A statistically significant negative association was noted between the PERC1 and PSS subscale called "work load" (p<0,05). SALIVARY IL-1B: the mean concentration of ILl-B at the start of the work-shift resulted higher than at the end, such reduction was statistically significant (P<0.05). We verified a positive association between the subclass of PSS Test called "conflict with other professionals" and salivary IL-1B concentration at the start of shift-work (p<0,05). DISCUSSION. Several precedent studies agree with our results. Our study has suggested a work related stress in urban police employed in an emergency team. We might conclude that salivary IL-1B and cortisol are useful markers of stress. We think that our findings, surely preliminary, have be corroborated by the study of vegetative parameters (heart rate, heart rate variability) that is still current. It might be useful to evaluate again the cortisol and IL-1B variations after some structure organizational modifications and after training that will teach the workers coping strategies. We might conclude that the stress discovered in this study is not hazardous for the health, if the workers have adequate holidays.

[Effect of a "Like!" seal on the stress reactions of nurses in a hospital].

PubMed

Yoshida, Eri; Yamada, Kazuko; Morioka, Ikuharu

2016-01-01

Improving the work environment is effective as a primary measure against mental health disorders. The aim of this study was to verify the hypothesis that using a "Like!" seal would promote friendly relations in the workplace, and reduce the stress reactions of nurses in a hospital. The "Like!" seal was inspired by "Thanks" cards conveying appreciation mutually, "OK" cards conveying the recognition of good points, and the "Like" button frequently used in social networking services. The subjects were 362 nurses working in a university hospital, of whom, 156 (43.1%) permitted the use of data collected before and after the intervention. A total of 151 (41.7%) subjects were analyzed. The intervention using the "Like!" seal lasted 8 weeks. The controls were 105 nurses who answered the same questionnaire in the same hospital and who permitted the use of the collected data. The question items comprised: basic attributes, the Brief Job Stress Questionnaire, the Sense of Coherence (SOC) scale, the Brief Scales for Coping Profile (BSCP), the lifestyles (HPI), and the number of uses of the "Like!" seal. To examine the effects of the intervention, a two-way analysis of variance was performed. To examine the factors related to changed psychological symptoms, a multiple linear regression analysis (stepwise method) was performed with the variation as the dependent variable. The number of uses of the "Like!" seal was 7,010 seals in total, and 19.4 seals on average per nurse. Many seals read phrases showing thanks and/or approval. Psychological symptoms showed a significant interaction. The scores increased in the intervention group after the intervention, but showed no change in the control group. Among the subscales of SOC, manageability showed a significant interaction. Increased scores were found in the intervention group after the intervention, but there was no change in the control group. Multiple linear regression analysis revealed that two factors were related to the variation of psychological symptoms. They were: the variation of manageability, and the number of seals used per nurse. The "Like!" seal which encourages mutual conveyance of feelings of thanks and/or approval has the potential to reduce the stress reactions of nurses.

Formation of cycloidal features on Europa.

PubMed

Hoppa, G V; Tufts, B R; Greenberg, R; Geissler, P E

1999-09-17

Cycloidal patterns are widely distributed on the surface of Jupiter's moon Europa. Tensile cracks may have developed such a pattern in response to diurnal variations in tidal stress in Europa's outer ice shell. When the tensile strength of the ice is reached, a crack may occur. Propagating cracks would move across an ever-changing stress field, following a curving path to a place and time where the tensile stress was insufficient to continue the propagation. A few hours later, when the stress at the end of the crack again exceeded the strength, propagation would continue in a new direction. Thus, one arcuate segment of the cycloidal chain would be produced during each day on Europa. For this model to work, the tensile strength of Europa's ice crust must be less than 40 kilopascals, and there must be a thick fluid layer below the ice to allow sufficient tidal amplitude.

Work stress and mental health in a changing society.

PubMed

Kopp, Maria S; Stauder, Adrienne; Purebl, György; Janszky, Imre; Skrabski, Arpád

2008-06-01

The aim of this representative study in the Hungarian population was to analyse the association between work-related factors and self-reported mental and physical health after controlling for negative affect and hostility as personality traits. The effects of job related factors on Beck Depression Score, WHO well-being score and self-rated health (SRH) were analysed in a representative sample of 3153 male and 2710 female economically active Hungarians. In both genders negative affect was the most important correlate of depression, well-being and SRH, whereas hostility was closely associated only with depression. Job insecurity, low control and low social support at work, weekend work hours, job-related life events and dissatisfaction with work and with boss were independent mental health risk factors, but there were important gender differences. Job related factors seem to be equally important predictors of mental health as social support from family. The results of this large national representative study indicate that independent of negative affect and hostility, a cluster of stressful work-related psychosocial conditions accounts for a substantial part of variation in self-reported mental and physical health of the economically active population in Hungary.

The Work Design Method for Human Friendly

NASA Astrophysics Data System (ADS)

Harada, Narumi; Sasaki, Masatoshi; Ichikawa, Masami

In order to realize “the product life cycle with respect for human nature". we ought to make work design so that work environment should be configured to be sound in mind and body, with due consideration of not only physical but also mental factors from the viewpoint of workers. The former includes too heavy work, unreasonable working posture, local fatigue of the body, the safety, and working comfort, and the latter includes work motivation, work worthiness, stress, etc. For the purpose of evaluating the degree of working comfort and safety at human-oriented production lines, we acknowledged, for the work design, the effectiveness of the work designing technique with working time variation duly considered. And, we formulated a model for a mental factor experienced by workers from the degree of working delays. This study covers a work design technique we developed with the effect of the factor as the value of evaluation.

Associations between prenatal, childhood, and adolescent stress and variations in white-matter properties in young men.

PubMed

Jensen, Sarah K G; Pangelinan, Melissa; Björnholm, Lassi; Klasnja, Anja; Leemans, Alexander; Drakesmith, Mark; Evans, C J; Barker, Edward D; Paus, Tomáš

2017-10-21

Previous studies have shown that both pre- and post-natal adversities, the latter including exposures to stress during childhood and adolescence, explain variation in structural properties of white matter (WM) in the brain. While previous studies have examined effects of independent stress exposures within one developmental period, such as childhood, we examine effects of stress across development using data from a prospective longitudinal study. More specifically, we ask how stressful events during prenatal development, childhood, and adolescence relate to variation in WM properties in early adulthood in young men recruited from a birth cohort. Using data from 393 mother-son pairs from a community-based birth cohort from England (Avon Longitudinal Study of Parents and Children), we examined how stressful life events relate to variation in different structural properties of WM in the corpus callosum and across the whole brain in early adulthood in men aged 18-21 years. We distinguish between stress occurring during three developmental periods: a) prenatal maternal stress, b) postnatal stress within the first four years of life, c) stress during adolescence (age 12-16 years). To obtain a comprehensive quantification of variation in WM, we assess structural properties of WM using four different measures, namely fractional anisotropy (FA), mean diffusivity (MD), magnetization transfer ratio (MTR) and myelin water fraction (MWF). The developmental model shows that prenatal stress is associated with lower MTR and MWF in the genu and/or splenium of the corpus callosum, and with lower MTR in global (lobar) WM. Stress during early childhood is associated with higher MTR in the splenium, and stress during adolescence is associated with higher MTR in the genu and lower MD in the splenium. We see no associations between postnatal stress and variation in global (lobar) WM. The current study found evidence for independent effects of stress on WM properties during distinct neurodevelopmental periods. We speculate that these independent effects are due to differences in the developmental processes unfolding at different developmental time points. We suggest that associations between prenatal stress and WM properties may relate to abnormalities in neurogenesis, affecting the number and density of axons, while postnatal stress may interfere with processes related to myelination or radial growth of axons. Potential consequences of prenatal glucocorticoid exposure should be considered in obstetric care. Copyright © 2017 Elsevier Inc. All rights reserved.

First-Ply-Failure Performance of Composite Clamped Spherical Shells

NASA Astrophysics Data System (ADS)

Ghosh, A.; Chakravorty, D.

2018-05-01

The failure aspects of composites are available for plates, but studies of the literature on shells unveils that similar reports on them are very limited in number. The aim of this work was to investigate the first-ply-failure of industrially and aesthetically important spherical shells under uniform loadings. Apart from solving benchmark problems, numerical experiments were carried out with different variations of their parameters to obtain the first-ply-failure stresses by using the finite-element method. The load was increased in steps, and the lamina strains and stresses were put into well-established failure criteria to evaluate their first-ply-failure stress, the failed ply, the point of initiation of failure, and failure modes and tendencies. The results obtained are analyzed to extract the points of engineering significance.

The role of fluid pressure on frictional behavior at the base of the seismogenic zone

USGS Publications Warehouse

Hirth, Greg; Beeler, Nicholas M.

2015-01-01

To characterize stress and deformation style at the base of the seismogenic zone, we investigate how the mechanical properties of fluid-rock systems respond to variations in temperature and strain rate. The role of fluids on the processes responsible for the brittle-ductile transition in quartz-rich rocks has not been explored at experimental conditions where the kinetic competition between microcracking and viscous flow is similar to that expected in the Earth. Our initial analysis of this competition suggests that the effective stress law for sliding friction should not work as efficiently near the brittle-ductile transition as it does at shallow conditions

Effect of wafer geometry on lithography chucking processes

NASA Astrophysics Data System (ADS)

Turner, Kevin T.; Sinha, Jaydeep K.

2015-03-01

Wafer flatness during exposure in lithography tools is critical and is becoming more important as feature sizes in devices shrink. While chucks are used to support and flatten the wafer during exposure, it is essential that wafer geometry be controlled as well. Thickness variations of the wafer and high-frequency wafer shape components can lead to poor flatness of the chucked wafer and ultimately patterning problems, such as defocus errors. The objective of this work is to understand how process-induced wafer geometry, resulting from deposited films with non-uniform stress, can lead to high-frequency wafer shape variations that prevent complete chucking in lithography scanners. In this paper, we discuss both the acceptable limits of wafer shape that permit complete chucking to be achieved, and how non-uniform residual stresses in films, either due to patterning or process non-uniformity, can induce high spatial frequency wafer shape components that prevent chucking. This paper describes mechanics models that relate non-uniform film stress to wafer shape and presents results for two example cases. The models and results can be used as a basis for establishing control strategies for managing process-induced wafer geometry in order to avoid wafer flatness-induced errors in lithography processes.

Measurement of Temperature and Relative Humidity with Polymer Optical Fiber Sensors Based on the Induced Stress-Optic Effect

PubMed Central

Pontes, Maria José

2018-01-01

This paper presents a system capable of measuring temperature and relative humidity with polymer optical fiber (POF) sensors. The sensors are based on variations of the Young’s and shear moduli of the POF with variations in temperature and relative humidity. The system comprises two POFs, each with a predefined torsion stress that resulted in a variation in the fiber refractive index due to the stress-optic effect. Because there is a correlation between stress and material properties, the variation in temperature and humidity causes a variation in the fiber’s stress, which leads to variations in the fiber refractive index. Only two photodiodes comprise the sensor interrogation, resulting in a simple and low-cost system capable of measuring humidity in the range of 5–97% and temperature in the range of 21–46 °C. The root mean squared errors (RMSEs) between the proposed sensors and the reference were 1.12 °C and 1.36% for the measurements of temperature and relative humidity, respectively. In addition, fiber etching resulted in a sensor with a 2 s response time for a relative humidity variation of 10%, which is one of the lowest recorded response times for intrinsic POF humidity sensors. PMID:29558387

Measurement of Temperature and Relative Humidity with Polymer Optical Fiber Sensors Based on the Induced Stress-Optic Effect.

PubMed

Leal-Junior, Arnaldo; Frizera-Neto, Anselmo; Marques, Carlos; Pontes, Maria José

2018-03-20

This paper presents a system capable of measuring temperature and relative humidity with polymer optical fiber (POF) sensors. The sensors are based on variations of the Young's and shear moduli of the POF with variations in temperature and relative humidity. The system comprises two POFs, each with a predefined torsion stress that resulted in a variation in the fiber refractive index due to the stress-optic effect. Because there is a correlation between stress and material properties, the variation in temperature and humidity causes a variation in the fiber's stress, which leads to variations in the fiber refractive index. Only two photodiodes comprise the sensor interrogation, resulting in a simple and low-cost system capable of measuring humidity in the range of 5-97% and temperature in the range of 21-46 °C. The root mean squared errors (RMSEs) between the proposed sensors and the reference were 1.12 °C and 1.36% for the measurements of temperature and relative humidity, respectively. In addition, fiber etching resulted in a sensor with a 2 s response time for a relative humidity variation of 10%, which is one of the lowest recorded response times for intrinsic POF humidity sensors.

The von Mises stress distribution on the surface of UHMWPE with texture-shaped variation in the presence of normal load and dry sliding contact

NASA Astrophysics Data System (ADS)

Lestari, W. D.; Jamari, J.; Bayuseno, A. P.

2017-04-01

The texture shapes play a key role in the tribological performance of the surface material. This paper presents a study on the use of the 3D finite element method for surface stress analysis on the different texture shape under load and dry sliding contact. The five texture-shaped model was investigated in this work, namely square, circle, ellipse, triangle, and chevron. The result shown that the square shape has the highest value of von Mises resultant stress under static load. In contrast, the dry sliding contact on the triangle shape provided the highest von Mises stress distribution. The lowest value of von Mises stress can be found in the texture pattern of circle, square, and chevron under influence of load for 17 N, 30 N, and 50 N, respectively. Those texture patterns applied to surface of Ultra High Molecular Weight Polyethylene (UHMWPE) may have a strong effect on the reduction of wear rate and enhance tribological performance.

Preliminary analysis of cold stress responsive proteins in Mesocestoides corti larvae.

PubMed

Canclini, Lucía; Esteves, Adriana

2007-07-01

Many parasites undergo sudden changes in environmental conditions at some stage during their life cycle. The molecular response to this variation is characterised by a rapid transcriptional activation of a specific set of genes coding for proteins generically known as stress proteins. They appear to be also involved in various biological processes including cell proliferation and differentiation. The platyhelminth parasite, Mesocestoides corti (Cestoda) presents important properties as a model organism. Under stress conditions, key molecules involved in metabolic pathways as well as in the growth and differentiation of the parasite can be identified. 2D protein expression profile of tetrathyridia of M. corti, submitted to nutritional starvation and cold stress is described, as well as the recovery pattern. A set of specifically expressed proteins was observed in each experimental condition. Quantitative and qualitative differences and stress recovery pattern are also reported. This work makes evident the high plasticity and resistance to extreme environmental conditions of these parasites at the molecular level.

Indirect Effect of Corticotropin-Releasing Hormone Receptor 1 Gene Variation on Negative Emotionality and Alcohol Use via Right Ventrolateral Prefrontal Cortex

PubMed Central

Glaser, Yi G.; Zubieta, Jon-Kar; Hsu, David T.; Villafuerte, Sandra; Mickey, Brian J.; Trucco, Elisa M.; Burmeister, Margit; Zucker, Robert A.

2014-01-01

Variations in the corticotropin-releasing hormone receptor 1 (CRHR1) gene have been found to interact with stress in modulating excessive alcohol consumption. However, the neural mechanisms through which CRHR1 influences this risk in humans is largely unknown. This study examined the influence of an intronic CRHR1 gene variant, rs110402, on brain responses to negative emotional words, negative emotional traits, and alcohol use in adolescents and young adults at high risk for alcoholism. Childhood stress was investigated as a potential moderator. Using functional magnetic resonance imaging, we found that a region in the right ventrolateral prefrontal cortex (rVLPFC) was more engaged during negative emotional word processing in G homozygotes than in A allele carriers (p(FWE corrected) < 0.01, N = 77). Moreover, an indirect effect of genotype on negative emotionality via rVLPFC activation (p < 0.05, N = 69) was observed, which was further moderated by childhood stress (p < 0.05, N = 63). Specifically, with low childhood stress, G homozygotes exhibited lower levels of negative emotionality associated with greater rVLPFC activation, suggesting that the rVLPFC is involved in reappraisal that neutralizes negative emotional responses. In addition, we found that genotype indirectly modulated excessive alcohol consumption (p < 0.05, N = 69). Specifically, G homozygotes showed greater rVLPFC activation and had lower levels of negative emotionality, which were associated with fewer binge-drinking days and fewer alcohol related problems. This work provides support for a model in which CRHR1 gene variation modulates the risk of problem drinking via an internalizing/negative affect pathway involving rVLPFC and reappraisal of negative emotion. PMID:24623788

[Influence of age and gender on plasma norepinephrine changes produced by orthostatic stress].

PubMed

Arata de Bellabarba, G; Molina, C; Dávila Spinetti, D; Villarroel, V; Bellabarba, S A; Torres, A

2001-01-01

The aim of this work was to determine the effect of aging and gender on plasma norepinephrine (NE) response to orthostatic stress. Fifty-six men and sixty women non-smokers, sedentary, non-obese, were studied at supine and standing positions. On the basis of the age of the subjects, they were divided into three groups of either men or women. Group A, young, range 17-34 years, Group B, middle-age, range 40-60 years, and Group C: senescent, range 61-91 years. Senescent subjects had the highest absolute supine values of NE and significant differences between women and men were found in groups B Men: 298 +/- 15 pg/mL; Women: 348 +/- 14 pg/mL), and C (M: 386 +/- 29 pg/mL; W: 473 +/- 19 pg/mL), but not between young (M: 246 +/- 21 pg/mL; W: 261 +/- 18 pg/mL). NE increased markedly in response to the orthostatic stress but the relative (percentage) increases were smaller in the older subjects perhaps related to their elevated baseline levels. The highest percent positive variation was observed in group A (M: 85%; W: 82%). The oldest group (C), had the lowest variation (M: 23%; W: 21%). The relative increases in NE responses were not different in men and women. The orthostatic-induced variation in NE was negatively related to aging in both men and women (M: r = -0.654; p < 0.0001; W: r = -0.557; p < 0.0001). It is concluded that orthostatic stress induced rise of blood NE is attenuated by age but does not appear to be dependent on gender.

Indirect effect of corticotropin-releasing hormone receptor 1 gene variation on negative emotionality and alcohol use via right ventrolateral prefrontal cortex.

PubMed

Glaser, Yi G; Zubieta, Jon-Kar; Hsu, David T; Villafuerte, Sandra; Mickey, Brian J; Trucco, Elisa M; Burmeister, Margit; Zucker, Robert A; Heitzeg, Mary M

2014-03-12

Variations in the corticotropin-releasing hormone receptor 1 (CRHR1) gene have been found to interact with stress in modulating excessive alcohol consumption. However, the neural mechanisms through which CRHR1 influences this risk in humans is largely unknown. This study examined the influence of an intronic CRHR1 gene variant, rs110402, on brain responses to negative emotional words, negative emotional traits, and alcohol use in adolescents and young adults at high risk for alcoholism. Childhood stress was investigated as a potential moderator. Using functional magnetic resonance imaging, we found that a region in the right ventrolateral prefrontal cortex (rVLPFC) was more engaged during negative emotional word processing in G homozygotes than in A allele carriers (p(FWE corrected) < 0.01, N = 77). Moreover, an indirect effect of genotype on negative emotionality via rVLPFC activation (p < 0.05, N = 69) was observed, which was further moderated by childhood stress (p < 0.05, N = 63). Specifically, with low childhood stress, G homozygotes exhibited lower levels of negative emotionality associated with greater rVLPFC activation, suggesting that the rVLPFC is involved in reappraisal that neutralizes negative emotional responses. In addition, we found that genotype indirectly modulated excessive alcohol consumption (p < 0.05, N = 69). Specifically, G homozygotes showed greater rVLPFC activation and had lower levels of negative emotionality, which were associated with fewer binge-drinking days and fewer alcohol related problems. This work provides support for a model in which CRHR1 gene variation modulates the risk of problem drinking via an internalizing/negative affect pathway involving rVLPFC and reappraisal of negative emotion.

Safety culture perceptions of pharmacists in Malaysian hospitals and health clinics: a multicentre assessment using the Safety Attitudes Questionnaire

PubMed Central

Samsuri, Srima Elina; Pei Lin, Lua; Fahrni, Mathumalar Loganathan

2015-01-01

Objective To assess the safety attitudes of pharmacists, provide a profile of their domains of safety attitude and correlate their attitudes with self-reported rates of medication errors. Design A cross-sectional study utilising the Safety Attitudes Questionnaire (SAQ). Setting 3 public hospitals and 27 health clinics. Participants 117 pharmacists. Main outcome measure(s) Safety culture mean scores, variation in scores across working units and between hospitals versus health clinics, predictors of safety culture, and medication errors and their correlation. Results Response rate was 83.6% (117 valid questionnaires returned). Stress recognition (73.0±20.4) and working condition (54.8±17.4) received the highest and lowest mean scores, respectively. Pharmacists exhibited positive attitudes towards: stress recognition (58.1%), job satisfaction (46.2%), teamwork climate (38.5%), safety climate (33.3%), perception of management (29.9%) and working condition (15.4%). With the exception of stress recognition, those who worked in health clinics scored higher than those in hospitals (p<0.05) and higher scores (overall score as well as score for each domain except for stress recognition) correlated negatively with reported number of medication errors. Conversely, those working in hospital (versus health clinic) were 8.9 times more likely (p<0.01) to report a medication error (OR 8.9, CI 3.08 to 25.7). As stress recognition increased, the number of medication errors reported increased (p=0.023). Years of work experience (p=0.017) influenced the number of medication errors reported. For every additional year of work experience, pharmacists were 0.87 times less likely to report a medication error (OR 0.87, CI 0.78 to 0.98). Conclusions A minority (20.5%) of the pharmacists working in hospitals and health clinics was in agreement with the overall SAQ questions and scales. Pharmacists in outpatient and ambulatory units and those in health clinics had better perceptions of safety culture. As perceptions improved, the number of medication errors reported decreased. Group-specific interventions that target specific domains are necessary to improve the safety culture. PMID:26610761

Configurational forces in electronic structure calculations using Kohn-Sham density functional theory

NASA Astrophysics Data System (ADS)

Motamarri, Phani; Gavini, Vikram

2018-04-01

We derive the expressions for configurational forces in Kohn-Sham density functional theory, which correspond to the generalized variational force computed as the derivative of the Kohn-Sham energy functional with respect to the position of a material point x . These configurational forces that result from the inner variations of the Kohn-Sham energy functional provide a unified framework to compute atomic forces as well as stress tensor for geometry optimization. Importantly, owing to the variational nature of the formulation, these configurational forces inherently account for the Pulay corrections. The formulation presented in this work treats both pseudopotential and all-electron calculations in a single framework, and employs a local variational real-space formulation of Kohn-Sham density functional theory (DFT) expressed in terms of the nonorthogonal wave functions that is amenable to reduced-order scaling techniques. We demonstrate the accuracy and performance of the proposed configurational force approach on benchmark all-electron and pseudopotential calculations conducted using higher-order finite-element discretization. To this end, we examine the rates of convergence of the finite-element discretization in the computed forces and stresses for various materials systems, and, further, verify the accuracy from finite differencing the energy. Wherever applicable, we also compare the forces and stresses with those obtained from Kohn-Sham DFT calculations employing plane-wave basis (pseudopotential calculations) and Gaussian basis (all-electron calculations). Finally, we verify the accuracy of the forces on large materials systems involving a metallic aluminum nanocluster containing 666 atoms and an alkane chain containing 902 atoms, where the Kohn-Sham electronic ground state is computed using a reduced-order scaling subspace projection technique [P. Motamarri and V. Gavini, Phys. Rev. B 90, 115127 (2014), 10.1103/PhysRevB.90.115127].

Determination of the maximum operating range of hydrodynamic stress in mammalian cell culture.

PubMed

Neunstoecklin, Benjamin; Stettler, Matthieu; Solacroup, Thomas; Broly, Hervé; Morbidelli, Massimo; Soos, Miroslav

2015-01-20

Application of quality by design (QbD) requires identification of the maximum operating range for parameters affecting the cell culture process. These include hydrodynamic stress, mass transfer or gradients in dissolved oxygen and pH. Since most of these are affected by the impeller design and speed, the main goal of this work was to identify a maximum operating range for hydrodynamic stress, where no variation of cell growth, productivity and product quality can be ensured. Two scale-down models were developed operating under laminar and turbulent condition, generating repetitive oscillating hydrodynamic stress with maximum stress values ranging from 0.4 to 420Pa, to compare the effect of the different flow regimes on the cells behavior. Two manufacturing cell lines (CHO and Sp2/0) used for the synthesis of therapeutic proteins were employed in this study. For both cell lines multiple process outputs were used to determine the threshold values of hydrodynamic stress, such as cell growth, morphology, metabolism and productivity. They were found to be different in between the cell lines with values equal to 32.4±4.4Pa and 25.2±2.4Pa for CHO and Sp2/0, respectively. Below the measured thresholds both cell lines do not show any appreciable effect of the hydrodynamic stress on any critical quality attribute, while above, cells responded negatively to the elevated stress. To confirm the applicability of the proposed method, the obtained results were compared with data generated from classical small-scale reactors with a working volume of 3L. Copyright © 2014 Elsevier B.V. All rights reserved.

Viscosity of dilute suspensions of rigid bead arrays at low shear: accounting for the variation in hydrodynamic stress over the bead surfaces.

PubMed

Allison, Stuart A; Pei, Hongxia

2009-06-11

In this work, we examine the viscosity of a dilute suspension of irregularly shaped particles at low shear. A particle is modeled as a rigid array of nonoverlapping beads of variable size and geometry. Starting from a boundary element formalism, approximate account is taken of the variation in hydrodynamic stress over the surface of the individual beads. For a touching dimer of two identical beads, the predicted viscosity is lower than the exact value by 5.2%. The methodology is then applied to several other model systems including tetramers of variable conformation and linear strings of touching beads. An analysis is also carried out of the viscosity and translational diffusion of several dilute amino acids and diglycine in water. It is concluded that continuum hydrodynamic modeling with stick boundary conditions is unable to account for the experimental viscosity and diffusion data simultaneously. A model intermediate between "stick" and "slip" could possibly reconcile theory and experiment.

Effects of Chronic Interpersonal Stress Exposure on Depressive Symptoms are Moderated by Genetic Variation at IL6 and IL1β in Youth

PubMed Central

Tartter, Margaret; Hammen, Constance; Bower, Julienne E.; Brennan, Patricia A.; Cole, Steven

2015-01-01

Aims Close to one third of patients with major depression show increases in pro-inflammatory cytokines, which are in turn associated with risk for inflammatory disease. Genetic variants that enhance immune reactivity may thus enhance inflammatory and depressive reactions to stress. The aim of the present study was to investigate a trio of functional SNPs in the promoter regions of IL6 (-174G>C, rs1800795), IL1β (-511C>T, rs16944), and TNF (-308G>A, rs1800629) as moderators of the relationship between chronic stress exposure and elevations in depressive symptoms. Methods Participants were 444 Australian youth (mean age = 20.12) whose exposure to chronic stress in the past 6 months was assessed using the semi-structured UCLA Life Stress Interview, and who completed the Beck Depression Inventory II at ages 15 and 20. Between ages 22 and 25, all participants in the selected sample provided blood samples for genotyping. Results In line with a hypothesized moderation effect, -174G allele carriers at IL6 had fewer depressive symptoms following interpersonal stress, relative to C/C homozygotes with equal interpersonal stress exposure. However, IL6 genotype did not moderate the effects of non-interpersonal stress exposure (i.e., financial, work and health-related difficulties) on depression. Also in line with hypotheses, the -511C allele in IL1β, previously associated with higher IL-1β expression, was associated with more severe depression following chronic interpersonal stress exposure, relative to T/T homozygotes. Again, the moderating effect was specific to interpersonal stressors and did not generalize to non-interpersonal stress. TNF was not a moderator of the effects of either interpersonal or non-interpersonal stress on later depression outcomes. Conclusion Findings were consistent with the hypothesis that pro-inflammatory genetic variation increases the risk of stress-induced depression. The present results provide evidence of a genetic mechanism contributing to individual differences in depressive symptomatology following interpersonal stress exposure. PMID:25596176

Temporal static stress drop variations due to injection activity at The Geysers geothermal field, California

NASA Astrophysics Data System (ADS)

Staszek, M.; Orlecka-Sikora, B.; Leptokaropoulos, K.; Kwiatek, G.; Martínez-Garzón, P.

2017-07-01

We use a high-quality data set from the NW part of The Geysers geothermal field to determine statistical significance of temporal static stress drop variations and their relation to injection rate changes. We use a group of 322 seismic events which occurred in the proximity of Prati-9 and Prati-29 injection wells to examine the influence of parameters such as moment magnitude, focal mechanism, hypocentral depth, and normalized hypocentral distances from open-hole sections of injection wells on static stress drop changes. Our results indicate that (1) static stress drop variations in time are statistically significant, (2) statistically significant static stress drop changes are inversely related to injection rate fluctuations. Therefore, it is highly expected that static stress drop of seismic events is influenced by pore pressure in underground fluid injection conditions and depends on the effective normal stress and strength of the medium.

Stresses and deformations in cross-ply composite tubes subjected to a uniform temperature change: Elasticity and Approximate Solutions

NASA Technical Reports Server (NTRS)

Hyer, M. W.; Cooper, D. E.; Cohen, D.

1985-01-01

The effects of a uniform temperature change on the stresses and deformations of composite tubes are investigated. The accuracy of an approximate solution based on the principle of complementary virtual work is determined. Interest centers on tube response away from the ends and so a planar elasticity approach is used. For the approximate solution a piecewise linear variation of stresses with the radial coordinate is assumed. The results from the approximate solution are compared with the elasticity solution. The stress predictions agree well, particularly peak interlaminar stresses. Surprisingly, the axial deformations also agree well. This, despite the fact that the deformations predicted by the approximate solution do not satisfy the interface displacement continuity conditions required by the elasticity solution. The study shows that the axial thermal expansion coefficient of tubes with a specific number of axial and circumferential layers depends on the stacking sequence. This is in contrast to classical lamination theory which predicts the expansion to be independent of the stacking arrangement. As expected, the sign and magnitude of the peak interlaminar stresses depends on stacking sequence.

Hsp70-GlcNAc-binding activity is released by stress, proteasome inhibition, and protein misfolding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guinez, Celine; Mir, Anne-Marie; Leroy, Yves

2007-09-21

Numerous recent works strengthen the idea that the nuclear and cytosolic-specific O-GlcNAc glycosylation protects cells against injuries. We have first investigated O-GlcNAc level and Hsp70-GlcNAc-binding activity (HGBA) behaviour after exposure of HeLa and HepG{sub 2} cells to a wide variety of stresses. O-GlcNAc and HGBA responses were different according to the stress and according to the cell. HGBA was released for almost all stresses, while O-GlcNAc level was modified either upwards or downwards, depending to the stress. Against all expectations, we demonstrated that energy charge did not significantly vary with stress whereas UDP-GlcNAc pools were more dramatically affected even ifmore » differences in UDP-GlcNAc contents were not correlated with O-GlcNAc variations suggesting that O-GlcNAc transferase is itself finely regulated during cell injury. Finally, HGBA could be triggered by proteasome inhibition and by L-azetidine-2-carboxylic acid (a proline analogue) incorporation demonstrating that protein misfolding is one of the key-activator of this Hsp70 property.« less

Variation in Emergency Medical Services Workplace Safety Culture

PubMed Central

Patterson, P. Daniel; Huang, David T.; Fairbanks, Rollin J.; Simeone, Scott; Weaver, Matthew; Wang, Henry E.

2010-01-01

Introduction Workplace attitude, beliefs and culture may impact the safety of patient care. This study characterized perceptions of safety culture in a nationwide sample of Emergency Medical Services (EMS) agencies. Methods We conducted a cross-sectional survey involving 61 Advanced Life Support EMS agencies in North America. We administered a modified version of the Safety Attitudes Questionnaire (SAQ), a survey instrument measuring dimensions of workplace safety culture (Safety Climate, Teamwork Climate, Perceptions of Management, Job Satisfaction, Working Conditions, and Stress Recognition). We included full-time and part-time paramedics and Emergency Medical Technicians. We determined the variation in safety culture scores across EMS agencies. Using Hierarchical Linear Models (HLM), we determined associations between safety culture scores and individual and EMS agency characteristics. Results We received 1,715 completed surveys from 61 EMS agencies (mean agency response rate 47%; 95% CI 10%, 83%). There was wide variation in safety culture scores across EMS agencies [mean (min, max)]: Safety Climate 74.5 (Min 49.9, Max 89.7), Teamwork Climate 71.2 (Min 45.1, Max 90.1), Perceptions of Management 67.2 (Min 31.1, Max 92.2), Job Satisfaction 75.4 (Min 47.5, Max 93.8), Working Conditions 66.9 (Min 36.6, Max 91.4), Stress Recognition 55.1 (Min 31.3, Max 70.6). Air medical EMS agencies tended to score higher across all safety culture domains. Lower safety culture scores were associated with increased annual patient contacts. Safety climate domain scores were not associated with other individual or EMS agency characteristics. Conclusion In this sample, workplace safety culture varies between EMS agencies. PMID:20809688

Determination of necking time in tensile test specimens, under high-temperature creep conditions, subjected to distribution of stresses over the cross-section

NASA Astrophysics Data System (ADS)

Lokoshchenko, A.; Teraud, W.

2018-04-01

The work describes an experimental research of creep of cylindrical tensile test specimens made of aluminum alloy D16T at a constant temperature of 400°C. The issue to be examined was the necking at different values of initial tensile stresses. The use of a developed noncontacting measuring system allowed us to see variations in the specimen shape and to estimate the true stress in various times. Based on the obtained experimental data, several criteria were proposed for describing the point of time at which the necking occurs (necking point). Calculations were carried out at various values of the parameters in these criteria. The relative interval of deformation time in which the test specimen is uniformly stretched was also determined.

Numerical Analysis of Residual Stress and Distortion Use Finite Element Method on Inner Bottom Construction of Geomarin IV Survey Ship with Welding Sequence Variations

NASA Astrophysics Data System (ADS)

Syahroni, N.; Hartono, A. B. W.; Murtedjo, M.

2018-03-01

In the ship fabrication industry, welding is the most critical stage. If the quality of welding on ship fabrication is not good, then it will affect the strength and overall appearance of the structure. One of the factors that affect the quality of welding is residual stress and distortion. In this research welding simulation is performed on the inner bottom construction of Geomarin IV Ship Survey using shell element and has variation to welding sequence. In this study, welding simulations produced peak temperatures at 2490 K at variation 4. While the lowest peak temperature was produced by variation 2 with a temperature of 2339 K. After welding simulation, it continued simulating residual stresses and distortion. The smallest maximum tensile residual stress found in the inner bottom construction is 375.23 MPa, and the maximum tensile pressure is -20.18 MPa. The residual stress is obtained from variation 3. The distortion occurring in the inner bottom construction for X=720 mm is 4.2 mm and for X=-720 mm, the distortion is 4.92 mm. The distortion is obtained from the variation 3. Near the welding area, distortion value reaches its minimum point. This is because the stiffeners in the form of frames serves as anchoring.

Stress and fatigue in sound engineers: the effect of broadcasting in a life show and shift work.

PubMed

Vangelova, Katia K

2008-06-01

The aim was to study the time-of-day variations of cortisol, fatigue and sleep disturbances in sound engineers in relation to job task and shift work. The concentration of saliva cortisol and feeling of stress, sleepiness and fatigue were followed at three hour intervals in 21 sound engineers: 13 sound engineers, aged 45.1 +/- 7.3 years, broadcasting in a life show during fast forward rotating shifts and 8 sound engineers, aged 47.1 +/- 9.8 years, making records in a studio during fast rotating day shifts. Cortisol concentration was assessed in saliva with radioimmunological kits. The participants reported for stress symptoms during the shifts and filled sleep diary. The data were analyzed by tests of between-subjects effects (SPSS). A trend for higher cortisol was found with the group broadcasting in a life show. The sound engineers broadcasting in a life show reported higher scores of stress, sleepiness and fatigue, but no significant differences concerning the sleep disturbances between the groups were found. In conclusion our data show moderate level of stress and fatigue with the studied sound engineers, higher with the subjects broadcasting in a life show. The quality of sleep showed no significant differences between the studied groups, an indication that the sound engineers were able to tolerate the fast forward rotating shifts.

Heart rate never lies: interventional cardiologist and Braude's quote revised

PubMed Central

Cook, Stéphane; Stauffer, Jean-Christophe; Goy, Jean-Jacques; Graf, Denis; Puricel, Serban; Frobert, Aurélien; Muller, Olivier; Togni, Mario; Arroyo, Diego

2016-01-01

Background Interventional cardiologists may be immune to stress, allowing them to perform complex percutaneous interventions under pressure. Objectives To assess heart rate (HR) variations as a surrogate marker of stress of interventional cardiologists during percutaneous cardiac procedures and in every-day life. Design This is a single-centre observational study including a total of six male interventional cardiologists performing coronary interventions and pacemaker implantations. Participants were asked to record their HR with the Apple Watch Device during procedures, every-day life and control activities such as outpatient consultations, sport, marital conflicts and sexual intercourse. Results Average daily HR was 88±17 bpm. During work days, HR increased significantly during procedures (90±17 bpm) compared with days outside the cathlab (87±17 bpm, p=0.02). The average HR was higher during a regular week working (88±16 bpm) compared with weekends off (84±18 bpm, p=0.002). Complex cardiac procedures were associated with higher HR up to 122 bpm. Peak HR were higher during physical exertion. Of note, participants complained of hypersexuality and mania after night shifts. Conclusions Work and especially percutaneous cardiac procedures increase HR independently of physical exertion suggesting that interventional cardiologists experience mental stress and emotions. PMID:26835145

The effects of stress on the enzymes of peripheral leukocytes

NASA Technical Reports Server (NTRS)

Leise, E. M.; Gray, I.

1973-01-01

Previous work showed an early response of rabbit and human leukocyte enzymes to the stress of bacterial infection. Since these represented a mixed population of leukocytes and since polymorphonuclear leukocytes (PMN) increased in these preparations, it was necessary to establish whether the observed increase in lactate dehydrenase (LDH) and protein was the result of an increase in any one particular cell type or in all cells. The need for the development of a simple reproducible method for the differential separation of peripheral leukocytes for the furtherance of our own studies was apparent. It was also becoming increasingly apparent that morphologically similar cells, such as small lymphocytes (L) and macrophages, were capable of different biological functions. A dextran gradient centrifugation method was developed which has provided an easily reproducible technique for separating L from PMN. During the course of this work, in which over 250 rabbits were examined, the pattern of daily leukocyte protein and enzyme variation became increasingly more apparent. This information could have some impact on future work with leukocyte enzymes, by our group and by other workers. The differences in normal protein and enzyme levels maintained by some individuals, and some inbred strains, were evaluated and reported separately. It has been shown that one type of leukocyte may react more to a given stress than other leukocytes.

Microstructures, Forming Limit and Failure Analyses of Inconel 718 Sheets for Fabrication of Aerospace Components

NASA Astrophysics Data System (ADS)

Sajun Prasad, K.; Panda, Sushanta Kumar; Kar, Sujoy Kumar; Sen, Mainak; Murty, S. V. S. Naryana; Sharma, Sharad Chandra

2017-04-01

Recently, aerospace industries have shown increasing interest in forming limits of Inconel 718 sheet metals, which can be utilised in designing tools and selection of process parameters for successful fabrication of components. In the present work, stress-strain response with failure strains was evaluated by uniaxial tensile tests in different orientations, and two-stage work-hardening behavior was observed. In spite of highly preferred texture, tensile properties showed minor variations in different orientations due to the random distribution of nanoprecipitates. The forming limit strains were evaluated by deforming specimens in seven different strain paths using limiting dome height (LDH) test facility. Mostly, the specimens failed without prior indication of localized necking. Thus, fracture forming limit diagram (FFLD) was evaluated, and bending correction was imposed due to the use of sub-size hemispherical punch. The failure strains of FFLD were converted into major-minor stress space ( σ-FFLD) and effective plastic strain-stress triaxiality space ( ηEPS-FFLD) as failure criteria to avoid the strain path dependence. Moreover, FE model was developed, and the LDH, strain distribution and failure location were predicted successfully using above-mentioned failure criteria with two stages of work hardening. Fractographs were correlated with the fracture behavior and formability of sheet metal.

Heart rate never lies: interventional cardiologist and Braude's quote revised.

PubMed

Cook, Stéphane; Stauffer, Jean-Christophe; Goy, Jean-Jacques; Graf, Denis; Puricel, Serban; Frobert, Aurélien; Muller, Olivier; Togni, Mario; Arroyo, Diego

2016-01-01

Interventional cardiologists may be immune to stress, allowing them to perform complex percutaneous interventions under pressure. To assess heart rate (HR) variations as a surrogate marker of stress of interventional cardiologists during percutaneous cardiac procedures and in every-day life. This is a single-centre observational study including a total of six male interventional cardiologists performing coronary interventions and pacemaker implantations. Participants were asked to record their HR with the Apple Watch Device during procedures, every-day life and control activities such as outpatient consultations, sport, marital conflicts and sexual intercourse. Average daily HR was 88±17 bpm. During work days, HR increased significantly during procedures (90±17 bpm) compared with days outside the cathlab (87±17 bpm, p=0.02). The average HR was higher during a regular week working (88±16 bpm) compared with weekends off (84±18 bpm, p=0.002). Complex cardiac procedures were associated with higher HR up to 122 bpm. Peak HR were higher during physical exertion. Of note, participants complained of hypersexuality and mania after night shifts. Work and especially percutaneous cardiac procedures increase HR independently of physical exertion suggesting that interventional cardiologists experience mental stress and emotions.

Reliability prediction of large fuel cell stack based on structure stress analysis

NASA Astrophysics Data System (ADS)

Liu, L. F.; Liu, B.; Wu, C. W.

2017-09-01

The aim of this paper is to improve the reliability of Proton Electrolyte Membrane Fuel Cell (PEMFC) stack by designing the clamping force and the thickness difference between the membrane electrode assembly (MEA) and the gasket. The stack reliability is directly determined by the component reliability, which is affected by the material property and contact stress. The component contact stress is a random variable because it is usually affected by many uncertain factors in the production and clamping process. We have investigated the influences of parameter variation coefficient on the probability distribution of contact stress using the equivalent stiffness model and the first-order second moment method. The optimal contact stress to make the component stay in the highest level reliability is obtained by the stress-strength interference model. To obtain the optimal contact stress between the contact components, the optimal thickness of the component and the stack clamping force are optimally designed. Finally, a detailed description is given how to design the MEA and gasket dimensions to obtain the highest stack reliability. This work can provide a valuable guidance in the design of stack structure for a high reliability of fuel cell stack.

Stresses and deformations in cross-ply composite tubes subjected to a uniform temperature change

NASA Technical Reports Server (NTRS)

Hyer, M. W.; Cooper, D. E.; Cohen, D.

1986-01-01

This study investigates the effects of a uniform temperature change on the stresses and deformations of composite tubes and determines the accuracy of an approximate solution based on the principle of complementary virtual work. Interest centers on tube response away from the ends and so a planar elasticity approach is used. For the approximate solution a piecewise linear variation of stresses with the radial coordinate is assumed. The results from the approximate solution are compared with the elasticity solution. The stress predictions agree well, particularly peak interlaminar stresses. Surprisingly, the axial deformations also agree well, despite the fact that the deformations predicted by the approximate solution do not satisfy the interface displacement continuity conditions required by the elasticity solution. The study shows that the axial thermal expansion coefficient of tubes with a specific number of axial and circumferential layers depends on the stacking sequence. This is in contrast to classical lamination theory, which predicts that the expansion will be independent of the stacking arrangement. As expected, the sign and magnitude of the peak interlaminar stresses depend on stacking sequence. For tubes with a specific number of axial and circumferential layers, thermally induced interlaminar stresses can be controlled by altering stacking arrangement.

Potassium Retention under Salt Stress Is Associated with Natural Variation in Salinity Tolerance among Arabidopsis Accessions

PubMed Central

Sun, Yanling; Kong, Xiangpei; Li, Cuiling; Liu, Yongxiu; Ding, Zhaojun

2015-01-01

Plants are exposed to various environmental stresses during their life cycle such as salt, drought and cold. Natural variation mediated plant growth adaptation has been employed as an effective approach in response to the diverse environmental cues such as salt stress. However, the molecular mechanism underlying this process is not well understood. In the present study, a collection of 82 Arabidopsis thaliana accessions (ecotypes) was screened with a view to identify variation for salinity tolerance. Seven accessions showed a higher level of tolerance than Col-0. The young seedlings of the tolerant accessions demonstrated a higher K+ content and a lower Na+/K+ ratio when exposed to salinity stress, but its Na+ content was the same as that of Col-0. The K+ transporter genes AtHAK5, AtCHX17 and AtKUP1 were up-regulated significantly in almost all the tolerant accessions, even in the absence of salinity stress. There was little genetic variation or positive transcriptional variation between the selections and Col-0 with respect to Na+-related transporter genes, as AtSOS genes, AtNHX1 and AtHKT1;1. In addition, under salinity stress, these selections accumulated higher compatible solutes and lower reactive oxygen species than did Col-0. Taken together, our results showed that natural variation in salinity tolerance of Arabidopsis seems to have been achieved by the strong capacity of K+ retention. PMID:25993093

Determination of Stress Intensity Factor Distributions for "Interface" Cracks in Incompressible, Dissimilar Materials

NASA Technical Reports Server (NTRS)

Smith, C. W.

1997-01-01

The present study was undertaken in order to develop test methods and procedures for measuring the variation of the stress intensity factor through the thickness in bimaterial specimens containing cracks within and parallel to the bond line using the frozen stress photoelastic method. Since stress freezing materials are incompressible above critical temperature, and since thick plates are to be employed which tend to produce a state of plane strain near the crack tip, the interface near tip fracture equations reduce to the classic form for homogeneous materials. Moreover, zero thickness interfaces do not exist when materials are bonded together. It was decided early on that it would be important to insure a uniform straight and accurate crack tip region through the thickness of the body to reduce scatter in the SIF distribution through the thickness. It was also observed that rubberlike materials which were desired to be modeled exhibited significant tip blunting prior to crack extension and that some blunting of the tip would provide a more realistic model. It should be noted that, in normal stress freezing photoelastic work, it is considered good practice to avoid utilizing data near bond lines in photoelastic models due to the bond line stresses which inevitably develop when two parts are bonded together. Thus, the present study involves certain exploratory aspects in deviating from standard practice in stress freezing work. With the above ideas in mind, several different test methods were investigated and are described in the following sections and appendices. The geometry selected for the program was a thick, edge cracked specimen containing a bond line.

Stress-related methylation of the catechol-O-methyltransferase Val 158 allele predicts human prefrontal cognition and activity.

PubMed

Ursini, Gianluca; Bollati, Valentina; Fazio, Leonardo; Porcelli, Annamaria; Iacovelli, Luisa; Catalani, Assia; Sinibaldi, Lorenzo; Gelao, Barbara; Romano, Raffaella; Rampino, Antonio; Taurisano, Paolo; Mancini, Marina; Di Giorgio, Annabella; Popolizio, Teresa; Baccarelli, Andrea; De Blasi, Antonio; Blasi, Giuseppe; Bertolino, Alessandro

2011-05-04

DNA methylation at CpG dinucleotides is associated with gene silencing, stress, and memory. The catechol-O-methyltransferase (COMT) Val(158) allele in rs4680 is associated with differential enzyme activity, stress responsivity, and prefrontal activity during working memory (WM), and it creates a CpG dinucleotide. We report that methylation of the Val(158) allele measured from peripheral blood mononuclear cells (PBMCs) of Val/Val humans is associated negatively with lifetime stress and positively with WM performance; it interacts with stress to modulate prefrontal activity during WM, such that greater stress and lower methylation are related to reduced cortical efficiency; and it is inversely related to mRNA expression and protein levels, potentially explaining the in vivo effects. Finally, methylation of COMT in prefrontal cortex and that in PBMCs of rats are correlated. The relationship of methylation of the COMT Val(158) allele with stress, gene expression, WM performance, and related brain activity suggests that stress-related methylation is associated with silencing of the gene, which partially compensates the physiological role of the high-activity Val allele in prefrontal cognition and activity. Moreover, these results demonstrate how stress-related DNA methylation of specific functional alleles impacts directly on human brain physiology beyond sequence variation.

Variational theorems for superimposed motions in elasticity, with application to beams

NASA Technical Reports Server (NTRS)

Doekmeci, M. C.

1976-01-01

Variational theorems are presented for a theory of small motions superimposed on large static deformations and governing equations for prestressed beams on the basis of 3-D theory of elastodynamics. First, the principle of virtual work is modified through Friedrichs's transformation so as to describe the initial stress problem of elastodynamics. Next, the modified principle together with a chosen displacement field is used to derive a set of 1-D macroscopic governing equations of prestressed beams. The resulting equations describe all the types of superimposed motions in elastic beams, and they include all the effects of transverse shear and normal strains, and the rotatory inertia. The instability of the governing equations is discussed briefly.

On searching applicants for mechanism of solar-lithosphere relations

NASA Astrophysics Data System (ADS)

Kairatkyzy, Dina; Andreyev, Alexey; Zhumabayeva, Saltanat; Seraliyev, Alibek

2016-04-01

It is actively discussed at present a question on possible influence of solar activity (high-speed solar wind streams bearing the "frozen" magnetic field lines of the Sun) on the stress status of the lithosphere and, consequently, on the Earth's seismic activity (e.g. Zhang, 1998, Acta Seismologica Sinica; Khachikyan et al., EGU2016-2754-1; IUGG2015-3132). There are at least two ideas on possible applicants for physical mechanism of solar-lithosphere relations: (i) - the muons of cosmic rays, which can penetrate the Earth's crust to a depth of at least the first ten kilometers and in tense seismic environment generate nuclear-electromagnetic cascade which energy can be a trigger of earthquake (Tsarev and Chechin, 1988, Preprint № 179, Physical Institute after Lebedev, Moscow); (ii) - the geomagnetic storms (Sobolev et al., 1998, Physics of the Earth #7) when the high-frequency oscillations of the geomagnetic field during the main phase of the storm generate significant induction currents which electric energy entering into the crust can be converted into mechanical energy increasing the stress status of the lithosphere (Sobolev and Demin, Mechano-electric phenomena into the Earth. M . Nauka. 1980). Besides this, among the possible cosmogenic factors changing the stress state of the lithosphere, could be the variation of the angular velocity of rotation of the Earth (e.g. Bostrom, 2000. Tectonic consequence of the Earth's Rotation), if it depends on solar activity variations. More of 50 years ago, Munk and Donald (The Rotation of the Earth, Cambrige University Press, 1960) suggested that the interaction between solar wind and geomagnetic field would probably influence the short period variation of angular velocity of the Earth. In this work, we check up this suggestion on the base of very precise data on the length of day (LOD) from 1986 to the present, which are presented by the International Earth Rotation and Reference Systems Service (IERS). Using the methods of spectral analysis, we studied the temporal variations in amplitudes of short period variation of the LOD and compared them with the temporal variations of the solar activity data. The obtained results are presented in this report.

Testing microdensitometric ability to determine Monterey pine urban tree stress

Treesearch

David J. Nowak; Joe R. McBride

1993-01-01

Microdensitometric analysis of aerial photographs has been used to quantify urban tree stress of deciduous species. A test of this procedure applied to Monterey pine indicates that variations in ground cover beneath urban trees among cities and variations in crown morphology among tree species can limit the ability of microdensitometry to quantify urban tree stress....

Earth tides, volcanos and climatic change

NASA Technical Reports Server (NTRS)

Roosen, R. G.; Harrington, R. S.; Giles, J.; Browning, I.

1976-01-01

The effect of variations in tidal stresses on the earth caused by the sun and moon on volcanic activity and climate is investigated. A statistically significant correlation is found between the derivatives of the envelopes of peak tidal stresses at high northern latitudes and the mean temperature of the Northern Hemisphere as reflected in oxygen isotope ratios in the Greenland ice cap. It is suggested that variations in tidal stresses cause changes in the amount of stratospheric dust produced by volcanic activity, which affects the thickness of the stratospheric dust veil and the atmospheric radiation balance. For a simple model, periodic variations in tidal stress account for 13% of the variance in the ice-core temperature record.

Physiological relevance of plant 2-Cys peroxiredoxin overoxidation level and oligomerization status.

PubMed

Cerveau, Delphine; Ouahrani, Djelloul; Marok, Mohamed Amine; Blanchard, Laurence; Rey, Pascal

2016-01-01

Peroxiredoxins are ubiquitous thioredoxin-dependent peroxidases presumed to display, upon environmental constraints, a chaperone function resulting from a redox-dependent conformational switch. In this work, using biochemical and genetic approaches, we aimed to unravel the factors regulating the redox status and the conformation of the plastidial 2-Cys peroxiredoxin (2-Cys PRX) in plants. In Arabidopsis, we show that in optimal growth conditions, the overoxidation level mainly depends on the availability of thioredoxin-related electron donors, but not on sulfiredoxin, the enzyme reducing the 2-Cys PRX overoxidized form. We also observed that upon various physiological temperature, osmotic and light stress conditions, the overoxidation level and oligomerization status of 2-Cys PRX can moderately vary depending on the constraint type. Further, no major change was noticed regarding protein conformation in water-stressed Arabidopsis, barley and potato plants, whereas species-dependent up- and down-variations in overoxidation were observed. In contrast, both 2-Cys PRX overoxidation and oligomerization were strongly induced during a severe oxidative stress generated by methyl viologen. From these data, revealing that the oligomerization status of plant 2-Cys PRX does not exhibit important variation and is not tightly linked to the protein redox status upon physiologically relevant environmental constraints, the possible in planta functions of 2-Cys PRX are discussed. © 2015 John Wiley & Sons Ltd.

Protective resources and perceptions of stress in a multi-ethnic sample of school-age children.

PubMed

Taxis, J Carole; Rew, Lynn; Jackson, Kate; Kouzekanani, Kamiar

2004-01-01

To investigate the relationship among protective resources of social connectedness, coping skills, and the perception of stress in 613 Hispanic and White school-aged children. A secondary analysis of data, part of a longitudinal cohort-sequential study designed to investigate health-risk behaviors in school-age children. Data were collected by computer-assisted self-interviewing from a non-probability sample of 8-12-year-olds in three independent school districts. Hierarchical multiple regression analysis indicated that social connectedness and the frequency of coping strategies used accounted for 18.8% of the variation in stress. "Feeling sick" was the primary stressor of the participants, while the two most frequently endorsed coping strategies were "watch TV or listen to music" and "draw, write, or read something." The findings are significant because nurses working with children are in a strategic position to assess risk factors and protective resources related to stress and intervene in a timely manner to assist children and families develop resiliency.

Measuring the effects of pore-pressure changes on seismic amplitude using crosswell continuous active-source seismic monitoring (CASSM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marchesini, Pierpaolo; Daley, Thomas; Ajo-Franklin, Jonathan

Monitoring of time-varying reservoir properties, such as the state of stress, is a primary goal of geophysical investigations, including for geological sequestration of CO 2, enhanced hydrocarbon recovery (EOR), and other subsurface engineering activities. In this work, we used Continuous Active-Source Seismic Monitoring (CASSM), with cross-well geometry, to measure variation in seismic coda amplitude, as a consequence of effective stress change (in the form of changes in pore fluid pressure). To our knowledge, the presented results are the first in-situ example of such crosswell measurement at reservoir scale and in field conditions. Data compliment the findings of our previous workmore » which investigated the relationship between pore fluid pressure and seismic velocity (velocity-stress sensitivity) using the CASSM system at the same field site (Marchesini et al., 2017, in review). We find that P-wave coda amplitude decreases with decreasing pore pressure (increasing effective stress).« less

Response of hot element flush wall gauges in oscillating laminar flow

NASA Technical Reports Server (NTRS)

Giddings, T. A.; Cook, W. J.

1986-01-01

The time dependent response characteristics of flush-mounted hot element gauges used as instruments to measure wall shear stress in unsteady periodic air flows were investigated. The study was initiated because anomalous results were obtained from the gauges in oscillating turbulent flows for the phase relation of the wall shear stress variation, indicating possible gauge response problems. Flat plate laminar oscillating turbulent flows characterized by a mean free stream velocity with a superposed sinusoidal variation were performed. Laminar rather than turbulent flows were studied, because a numerical solution for the phase angle between the free stream velocity and the wall shear stress variation that is known to be correct can be obtained. The focus is on comparing the phase angle indicated by the hot element gauges with corresponding numerical prediction for the phase angle, since agreement would indicate that the hot element gauges faithfully follow the true wall shear stress variation.

Effect of ferrite transformation on the tensile and stress corrosion properties of type 316 L stainless steel weld metal thermally aged at 873 K

NASA Astrophysics Data System (ADS)

Shaikh, H.; Khatak, H. S.; Seshadri, S. K.; Gnanamoorthy, J. B.; Rodriguez, P.

1995-07-01

This article deals with the effect of the microstructural changes, due to transformation of delta ferrite, on the associated variations that take place in the tensile and stress corrosion properties of type 316 L stainless steel weld deposits when subjected to postweld heat treatment at 873 K for prolonged periods (up to 2000 hours). On aging for short durations (up to 20 hours), carbide/ carbonitride was the dominant transformation product, whereas sigma phase was dominant at longer aging times. The changes in the tensile and stress corrosion behavior of the aged weld metal have been attributed to the two competitive processes of matrix softening and hardening. Yield strength (YS) was found to depend predominantly on matrix softening only, while sig-nificant changes in the ultimate tensile strength (UTS) and the work-hardening exponent, n, occurred due to matrix hardening. Ductility and stress corrosion properties were considerably affected by both factors. Fractographic observations on the weld metal tested for stress-corrosion cracking (SCC) indicated a combination of transgranular cracking of the austenite and interface cracking.

Genome-Wide Survey on Genomic Variation, Expression Divergence, and Evolution in Two Contrasting Rice Genotypes under High Salinity Stress

PubMed Central

Jiang, Shu-Ye; Ma, Ali; Ramamoorthy, Rengasamy; Ramachandran, Srinivasan

2013-01-01

Expression profiling is one of the most important tools for dissecting biological functions of genes and the upregulation or downregulation of gene expression is sufficient for recreating phenotypic differences. Expression divergence of genes significantly contributes to phenotypic variations. However, little is known on the molecular basis of expression divergence and evolution among rice genotypes with contrasting phenotypes. In this study, we have implemented an integrative approach using bioinformatics and experimental analyses to provide insights into genomic variation, expression divergence, and evolution between salinity-sensitive rice variety Nipponbare and tolerant rice line Pokkali under normal and high salinity stress conditions. We have detected thousands of differentially expressed genes between these two genotypes and thousands of up- or downregulated genes under high salinity stress. Many genes were first detected with expression evidence using custom microarray analysis. Some gene families were preferentially regulated by high salinity stress and might play key roles in stress-responsive biological processes. Genomic variations in promoter regions resulted from single nucleotide polymorphisms, indels (1–10 bp of insertion/deletion), and structural variations significantly contributed to the expression divergence and regulation. Our data also showed that tandem and segmental duplication, CACTA and hAT elements played roles in the evolution of gene expression divergence and regulation between these two contrasting genotypes under normal or high salinity stress conditions. PMID:24121498

Effect of pressurization on helical guided wave energy velocity in fluid-filled pipes.

PubMed

Dubuc, Brennan; Ebrahimkhanlou, Arvin; Salamone, Salvatore

2017-03-01

The effect of pressurization stresses on helical guided waves in a thin-walled fluid-filled pipe is studied by modeling leaky Lamb waves in a stressed plate bordered by fluid. Fluid pressurization produces hoop and longitudinal stresses in a thin-walled pipe, which corresponds to biaxial in-plane stress in a plate waveguide model. The effect of stress on guided wave propagation is accounted for through nonlinear elasticity and finite deformation theory. Emphasis is placed on the stress dependence of the energy velocity of the guided wave modes. For this purpose, an expression for the energy velocity of leaky Lamb waves in a stressed plate is derived. Theoretical results are presented for the mode, frequency, and directional dependent variations in energy velocity with respect to stress. An experimental setup is designed for measuring variations in helical wave energy velocity in a thin-walled water-filled steel pipe at different levels of pressure. Good agreement is achieved between the experimental variations in energy velocity for the helical guided waves and the theoretical leaky Lamb wave solutions. Copyright © 2016 Elsevier B.V. All rights reserved.

Psychological distress in Canada: the role of employment and reasons of non-employment.

PubMed

Marchand, Alain; Drapeau, Aline; Beaulieu-Prévost, Dominic

2012-11-01

This study investigated variations in psychological distress in a large sample of the Canadian population according to employment status, occupation, work organization conditions, reasons for non-employment, stress and support outside the work environment, family situation and individual characteristics. Data came from cycle 4 (2000-1) of the Canadian National Population Health Survey conducted by Statistics Canada. Multiple regression analyses, adjusted for the family situation, the level of support from the social network and the individual characteristics, were carried out on a sample of 7258 individuals aged from 18 to 65 years. Occupation, social support at work, age, self-esteem, presence of children aged five and under and social support outside of the workplace were associated with lower levels of psychological distress, while permanent and temporary disability, psychological demands in the workplace, job insecurity, female gender, and stressful financial, marital and parental situations were related to higher levels of psychological distress. Findings from this study suggest that, in terms of psychological distress, having a job is not always better than non-employment, and that specific non-employment situations associate differently with psychological distress.

The Lithospheric Geoid as a Constraint on Plate Dynamics

NASA Astrophysics Data System (ADS)

Richardson, R. M.; Coblentz, D. D.

2015-12-01

100 years after Wegener's pioneering work there is still considerable debate about the dynamics of present-day plate motions. A better understanding of present-day dynamics is key to a better understanding of the supercontinent cycle. The Earth's gravity field is one of the primary data sets to help constrain horizontal density contrasts, and hence plate dynamic forces. Previous work has shown that the global average for the geoid step up from old oceanic lithosphere across passive continental margins to stable continental lithosphere is about 6-9m, and the global average for the geoid anomaly associated with cooling oceanic lithosphere (the so-called "ridge push") is 10-12m. The ridge geoid anomaly corresponds to a net force of ~3x1012N/m (averaged over the thickness of the lithosphere) due to 'ridge push.' However, for individual continental margins and mid-ocean ridge systems, there is considerable variation in the geoid step and geoid anomaly and consequently the associated forces contributing to the stress field. We explore the variation in geoid step across passive continental margins looking for correlations with age of continental breakup (and hence place within the supercontinent cycle), hot spot tracks, continental plate velocities, long-wavelength geoid energy (that may be masking signal), and small scale convection. For mid-ocean ridges, we explore variations in geoid anomaly looking for correlations with plate spreading rates, hot spot tracks, long-wavelength geoid energy (that may be masking signal), and small scale convection. We use a band-pass spherical harmonic filter on the full geoid (e.g., EGM2008-WGS84, complete to spherical harmonic degree and order 2159) between orders 6 and 80. The evaluation of the role of spatial variations in the geoid gradient for cooling oceanic lithosphere and across the continental margin in the dynamics of the intraplate stress field requires high spatial resolution modeling. We perform a high resolution finite element analysis (~35,000 elements for a spatial resolution of approximately 50 km) for the North American plate, where previous lower resolution modeling has shown the importance of the lithospheric cooling (ridge push) force to model the broad scale stress patterns observed from the middle of the continent to the Mid-Atlantic ridge.

The theory and prototype development of a stress-monitoring system

USGS Publications Warehouse

Swolfs, H.S.; Walsh, J.B.

1990-01-01

A new approach has been developed by which changes in rock stress can be measured directly. The measurement of stress change depends on the reaction of a slender, compliant cavity to the transient variations of rock stress about the cavity. A liquid-filled pressurized cell, emplaced in the cavity, provides the means by which changes in pressure can be monitored. Earthquake-related variations in the stress field in a highly fractured quartz-monzonite stock have been observed to occur in a characteristic way prior to a microseismic event. The precursory stress change (decompression followed by compression) lasted about 5 hours and led directly to a stress drop of 15 ?? 10-3 bar. -from Authors

Genome-Wide Association Study Reveals a New QTL for Salinity Tolerance in Barley (Hordeum vulgare L.)

PubMed Central

Fan, Yun; Zhou, Gaofeng; Shabala, Sergey; Chen, Zhong-Hua; Cai, Shengguan; Li, Chengdao; Zhou, Meixue

2016-01-01

Salinity stress is one of the most severe abiotic stresses that affect agricultural production. Genome wide association study (GWAS) has been widely used to detect genetic variations in extensive natural accessions with more recombination and higher resolution. In this study, 206 barley accessions collected worldwide were genotyped with 408 Diversity Arrays Technology (DArT) markers and evaluated for salinity stress tolerance using salinity tolerance score – a reliable trait developed in our previous work. GWAS for salinity tolerance had been conducted through a general linkage model and a mixed linkage model based on population structure and kinship. A total of 24 significant marker-trait associations were identified. A QTL on 4H with the nearest marker of bPb-9668 was consistently detected in all different methods. This QTL has not been reported before and is worth to be further confirmed with bi-parental populations. PMID:27446173

The stress response and exploratory behaviour in Yucatan minipigs (Sus scrofa): Relations to sex and social rank.

PubMed

Adcock, Sarah J J; Martin, Gerard M; Walsh, Carolyn J

2015-12-01

According to the coping styles hypothesis, an individual demonstrates an integrated behavioural and physiological response to environmental challenge that is consistent over time and across situations. Individual consistency in behavioural responses to challenge has been documented across the animal kingdom. Comparatively few studies, however, have examined inter-individual variation in the physiological response, namely glucocorticoid and catecholamine levels, the stress hormones secreted by the hypothalamic-pituitary-adrenal axis and the sympathetic nervous system, respectively. Variation in coping styles between individuals may be explained in part by differences in social rank and sex. Using 20 Yucatan minipigs (Sus scrofa) we: (1) investigated the existence of consistent inter-individual variation in exploratory behaviour and the hormonal stress response, and tested for correlations as predicted by the coping styles hypothesis; and (2) evaluated whether inter-individual behavioural and hormonal variation is related to social rank and sex. Salivary stress biomarkers (cortisol, alpha-amylase, chromogranin A) were assessed in the presence and absence of a stressor consisting of social isolation in a crate for 10 min. Principal components analysis on a set of behavioural variables revealed two traits, which we labelled exploratory tendency and neophobia. Neither exploratory tendency nor neophobia predicted the physiological stress response. Subordinate pigs exhibited higher catecholamine levels compared to dominant conspecifics. We observed sex differences in the repeatability of salivary stress markers and reactivity of the stress systems. The results do not provide support for the existence of behavioural-physiological coping styles in pigs. Sex is an important determinant of the physiological stress response and warrants consideration in research addressing behavioural and hormonal variation. Copyright © 2015 Elsevier Inc. All rights reserved.

Sequence and expression variations suggest an adaptive role for the DA1-like gene family in the evolution of soybeans.

PubMed

Zhao, Man; Gu, Yongzhe; He, Lingli; Chen, Qingshan; He, Chaoying

2015-05-15

The DA1 gene family is plant-specific and Arabidopsis DA1 regulates seed and organ size, but the functions in soybeans are unknown. The cultivated soybean (Glycine max) is believed to be domesticated from the annual wild soybeans (Glycine soja). To evaluate whether DA1-like genes were involved in the evolution of soybeans, we compared variation at both sequence and expression levels of DA1-like genes from G. max (GmaDA1) and G. soja (GsoDA1). Sequence identities were extremely high between the orthologous pairs between soybeans, while the paralogous copies in a soybean species showed a relatively high divergence. Moreover, the expression variation of DA1-like paralogous genes in soybean was much greater than the orthologous gene pairs between the wild and cultivated soybeans during development and challenging abiotic stresses such as salinity. We further found that overexpressing GsoDA1 genes did not affect seed size. Nevertheless, overexpressing them reduced transgenic Arabidopsis seed germination sensitivity to salt stress. Moreover, most of these genes could improve salt tolerance of the transgenic Arabidopsis plants, corroborated by a detection of expression variation of several key genes in the salt-tolerance pathways. Our work suggested that expression diversification of DA1-like genes is functionally associated with adaptive radiation of soybeans, reinforcing that the plant-specific DA1 gene family might have contributed to the successful adaption to complex environments and radiation of the plants.

Does oxidative stress shorten telomeres?

PubMed

Boonekamp, Jelle J; Bauch, Christina; Mulder, Ellis; Verhulst, Simon

2017-05-01

Oxidative stress shortens telomeres in cell culture, but whether oxidative stress explains variation in telomere shortening in vivo at physiological oxidative stress levels is not well known. We therefore tested for correlations between six oxidative stress markers and telomere attrition in nestling birds (jackdaws Corvus monedula ) that show a high rate of telomere attrition in early life. Telomere attrition was measured between ages 5 and 30 days, and was highly variable (average telomere loss: 323 bp, CV = 45%). Oxidative stress markers were measured in blood at age 20 days and included markers of oxidative damage (TBARS, dROMs and GSSG) and markers of antioxidant protection (GSH, redox state, uric acid). Variation in telomere attrition was not significantly related to these oxidative stress markers (| r | ≤ 0.08, n = 87). This finding raises the question whether oxidative stress accelerates telomere attrition in vivo The accumulation of telomere attrition over time depends both on the number of cell divisions and on the number of base pairs lost per DNA replication and, based on our findings, we suggest that in a growing animal cell proliferation, dynamics may be more important for explaining variation in telomere attrition than oxidative stress. © 2017 The Author(s).

Hot deformation characteristics of AZ80 magnesium alloy: Work hardening effect and processing parameter sensitivities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Y.; Wan, L.; Guo, Z. H.

Isothermal compression experiment of AZ80 magnesium alloy was conducted by Gleeble thermo-mechanical simulator in order to quantitatively investigate the work hardening (WH), strain rate sensitivity (SRS) and temperature sensitivity (TS) during hot processing of magnesium alloys. The WH, SRS and TS were described by Zener-Hollomon parameter (Z) coupling of deformation parameters. The relationships between WH rate and true strain as well as true stress were derived from Kocks-Mecking dislocation model and validated by our measurement data. The slope defined through the linear relationship of WH rate and true stress was only related to the annihilation coefficient Ω. Obvious WH behaviormore » could be exhibited at a higher Z condition. Furthermore, we have identified the correlation between the microstructural evolution including β-Mg17Al12 precipitation and the SRS and TS variations. Intensive dynamic recrystallization and homogeneous distribution of β-Mg17Al12 precipitates resulted in greater SRS coefficient at higher temperature. The deformation heat effect and β-Mg17Al12 precipitate content can be regarded as the major factors determining the TS behavior. At low Z condition, the SRS becomes stronger, in contrast to the variation of TS. The optimum hot processing window was validated based on the established SRS and TS values distribution maps for AZ80 magnesium alloy.« less

Effect of Mechanical Stresses on Characteristics of Chip Tantalum Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander A.

2007-01-01

The effect of compressive mechanical stresses on chip solid tantalum capacitors is investigated by monitoring characteristics of different part types under axial and hydrostatic stresses. Depending on part types, an exponential increase of leakage currents was observed when stresses exceeded 10 MPa to 40 MPa. For the first time, reversible variations of leakage currents (up to two orders of magnitude) with stress have been demonstrated. Mechanical stresses did not cause significant changes of AC characteristics of the capacitors, whereas breakdown voltages measured during the surge current testing decreased substantially indicating an increased probability of failures of stressed capacitors in low impedance applications. Variations of leakage currents are explained by a combination of two mechanisms: stress-induced scintillations and stress-induced generation of electron traps in the tantalum pentoxide dielectric.

Modeling spanwise nonuniformity in the cross-sectional analysis of composite beams

NASA Astrophysics Data System (ADS)

Ho, Jimmy Cheng-Chung

Spanwise nonuniformity effects are modeled in the cross-sectional analysis of beam theory. This modeling adheres to an established numerical framework on cross-sectional analysis of uniform beams with arbitrary cross-sections. This framework is based on two concepts: decomposition of the rotation tensor and the variational-asymptotic method. Allowance of arbitrary materials and geometries in the cross-section is from discretization of the warping field by finite elements. By this approach, dimensional reduction from three-dimensional elasticity is performed rigorously and the sectional strain energy is derived to be asymptotically-correct. Elastic stiffness matrices are derived for inputs into the global beam analysis. Recovery relations for the displacement, stress, and strain fields are also derived with care to be consistent with the energy. Spanwise nonuniformity effects appear in the form of pointwise and sectionwise derivatives, which are approximated by finite differences. The formulation also accounts for the effects of spanwise variations in initial twist and/or curvature. A linearly tapered isotropic strip is analyzed to demonstrate spanwise nonuniformity effects on the cross-sectional analysis. The analysis is performed analytically by the variational-asymptotic method. Results from beam theory are validated against solutions from plane stress elasticity. These results demonstrate that spanwise nonuniformity effects become significant as the rate at which the cross-sections vary increases. The modeling of transverse shear modes of deformation is accomplished by transforming the strain energy into generalized Timoshenko form. Approximations in this transformation procedure from previous works, when applied to uniform beams, are identified. The approximations are not used in the present work so as to retain more accuracy. Comparison of present results with those previously published shows that these approximations sometimes change the results measurably and thus are inappropriate. Static and dynamic results, from the global beam analysis, are calculated to show the differences between using stiffness constants from previous works and the present work. As a form of validation of the transformation procedure, calculations from the global beam analysis of initially twisted isotropic beams from using curvilinear coordinate axes featuring twist are shown to be equivalent to calculations using Cartesian coordinates.

Safety culture perceptions of pharmacists in Malaysian hospitals and health clinics: a multicentre assessment using the Safety Attitudes Questionnaire.

PubMed

Samsuri, Srima Elina; Pei Lin, Lua; Fahrni, Mathumalar Loganathan

2015-11-26

To assess the safety attitudes of pharmacists, provide a profile of their domains of safety attitude and correlate their attitudes with self-reported rates of medication errors. A cross-sectional study utilising the Safety Attitudes Questionnaire (SAQ). 3 public hospitals and 27 health clinics. 117 pharmacists. Safety culture mean scores, variation in scores across working units and between hospitals versus health clinics, predictors of safety culture, and medication errors and their correlation. Response rate was 83.6% (117 valid questionnaires returned). Stress recognition (73.0±20.4) and working condition (54.8±17.4) received the highest and lowest mean scores, respectively. Pharmacists exhibited positive attitudes towards: stress recognition (58.1%), job satisfaction (46.2%), teamwork climate (38.5%), safety climate (33.3%), perception of management (29.9%) and working condition (15.4%). With the exception of stress recognition, those who worked in health clinics scored higher than those in hospitals (p<0.05) and higher scores (overall score as well as score for each domain except for stress recognition) correlated negatively with reported number of medication errors. Conversely, those working in hospital (versus health clinic) were 8.9 times more likely (p<0.01) to report a medication error (OR 8.9, CI 3.08 to 25.7). As stress recognition increased, the number of medication errors reported increased (p=0.023). Years of work experience (p=0.017) influenced the number of medication errors reported. For every additional year of work experience, pharmacists were 0.87 times less likely to report a medication error (OR 0.87, CI 0.78 to 0.98). A minority (20.5%) of the pharmacists working in hospitals and health clinics was in agreement with the overall SAQ questions and scales. Pharmacists in outpatient and ambulatory units and those in health clinics had better perceptions of safety culture. As perceptions improved, the number of medication errors reported decreased. Group-specific interventions that target specific domains are necessary to improve the safety culture. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Effects of the Variation in Brain Tissue Mechanical Properties on the Intracranial Response of a 6-Year-Old Child.

PubMed

Cui, Shihai; Li, Haiyan; Li, Xiangnan; Ruan, Jesse

2015-01-01

Brain tissue mechanical properties are of importance to investigate child head injury using finite element (FE) method. However, these properties used in child head FE model normally vary in a large range in published literatures because of the insufficient child cadaver experiments. In this work, a head FE model with detailed anatomical structures is developed from the computed tomography (CT) data of a 6-year-old healthy child head. The effects of brain tissue mechanical properties on traumatic brain response are also analyzed by reconstruction of a head impact on engine hood according to Euro-NCAP testing regulation using FE method. The result showed that the variations of brain tissue mechanical parameters in linear viscoelastic constitutive model had different influences on the intracranial response. Furthermore, the opposite trend was obtained in the predicted shear stress and shear strain of brain tissues caused by the variations of mentioned parameters.

Magnetic storms and variations in hormone levels among residents of North Polar area - Svalbard

NASA Astrophysics Data System (ADS)

Breus, T. K.; Boiko, E. R.; Zenchenko, T. A.

2015-01-01

In the present work four examinations (January, March, June, October 1991-1992) of the blood concentration of adrenal hormones (cortisol) and thyroid hormones (triiodothyronine (T3) and thyroxine T4) and their dependence on space and terrestrial weather parameters have been done for large groups of healthy inhabitants of high latitudes (Svalbard, the most northerly in the world year-round inhabited settlements). The aim of this study was to find the possible sensitivity of these biochemical parameters to variations of external natural factors at high latitudes in three independent groups of people living in this region (miners and people working underground (364 samples), the men working on the ground (274 samples) and women working on the ground (280 samples)). The obtained data indicate that the most expressed dependence of concentration of the three studied hormones is on the level of geomagnetic activity (GMA) - Kp, Ap, Kpmax - 3h. For two of the four seasons (June and October) with increasing levels of GMA a significant (p < 0.05) increase in cortisol concentration in all three independent groups of people was observed. Range of increases in cortisol concentration in different groups were about 30% of the observed variation in the average intragroup concentration in June and from 16% to 38% in October. For T3 dependence was found only in June: drop in hormone secretion with increasing levels of GMA from 18 to 30% of the average range of intragroup variations. Thus it was shown for the first time that at high geographical latitudes with increased level of GMA a significant change in the level of secretion of several hormones leads to the type of adaptive stress reaction.

Magnetic storms and variations in hormone levels among residents of North Polar area--Svalbard.

PubMed

Breus, T K; Boiko, E R; Zenchenko, T A

2015-01-01

In the present work four examinations (January, March, June, October 1991-1992) of the blood concentration of adrenal hormones (cortisol) and thyroid hormones (triiodothyronine (T3) and thyroxine T4) and their dependence on space and terrestrial weather parameters have been done for large groups of healthy inhabitants of high latitudes (Svalbard, the most northerly in the world year-round inhabited settlements). The aim of this study was to find the possible sensitivity of these biochemical parameters to variations of external natural factors at high latitudes in three independent groups of people living in this region (miners and people working underground (364 samples), the men working on the ground (274 samples) and women working on the ground (280 samples)). The obtained data indicate that the most expressed dependence of concentration of the three studied hormones is on the level of geomagnetic activity (GMA) - Kp, Ap, Kpmax - 3h. For two of the four seasons (June and October) with increasing levels of GMA a significant (p<0.05) increase in cortisol concentration in all three independent groups of people was observed. Range of increases in cortisol concentration in different groups were about 30% of the observed variation in the average intragroup concentration in June and from 16% to 38% in October. For T3 dependence was found only in June: drop in hormone secretion with increasing levels of GMA from 18 to 30% of the average range of intragroup variations. Thus it was shown for the first time that at high geographical latitudes with increased level of GMA a significant change in the level of secretion of several hormones leads to the type of adaptive stress reaction. Copyright © 2014 The Committee on Space Research (COSPAR). Published by Elsevier Ltd. All rights reserved.

The variation of the unitary stresses occurring in the working part in relation to the type of soil, using the finite element method

NASA Astrophysics Data System (ADS)

Chiorescu, E.; Chiorescu, D.

2017-08-01

Agriculture brings a major contribution to the sustainable development of the economy, providing food to people. Because of the continuous growth of the population, there is an ever increasing need of food worldwide. For this reason, it is necessary to study the contact between the soil and the active tool of the cultivators, in relation to the type of soil and its parameters. The physical-mechanical characteristics of the soils are influenced by the moving velocity of the working part, as well as by the humidity of the soil. The humidity triggers the change of the friction coefficient at the soil-steel contact, being of significant importance for the decrease of the working resistance of the working tools and responsible for increasing exploitation costs. The model used for the soil has a non-linear plastic behavior of the Drucker Prager type, being different from the Mises model. The programming software Ansys was used for the simulation with the finite element method, allowing the study of the behavior of the active working part, the normal stress being analyzed in real conditions, at various depths and velocities for a soil with a clay-sandy texture.

Seasonal variations of anti-/apoptotic and antioxidant proteins in the heart and gastrocnemius muscle of the water frog Pelophylax ridibundus.

PubMed

Feidantsis, Konstantinos; Anestis, Andreas; Michaelidis, Basile

2013-10-01

In the present work we investigated the seasonal variations of apoptotic and antioxidant proteins in the heart and gastrocnemius muscle of the amphibian Pelophylax ridibundus. Particularly processes studied included the evaluation of hypoxia through the levels of transcriptional factor Hif-1α, of apoptosis through the determination of Bcl-2 and Bax, ubiquitin conjugates levels and the antioxidant defense through the determination of the activity of enzymes such as superoxide dismutase, catalase and glutathione peroxidase. Due to a general metabolic depression during overwintering, levels of the above mentioned proteins and enzymes are generally retained at low levels of expression and activity in the examined tissues of P. ridibundus. On the other hand recovery from overwintering induces oxidative stress, followed by increased levels of the specific proteins and enzymes. A milder up-regulation of antioxidant enzymes during overwintering probably prepares P. ridibundus for oxidative stress during arousal. The seasonal activation of these mechanisms seems to protect this species from these unfavourable conditions. Copyright © 2013 Elsevier Inc. All rights reserved.

[Monitoring of occupational activities under the risk of heat stress: use of mathematical models in the prediction of physiological parameters].

PubMed

Terzi, R; Catenacci, G; Marcaletti, G

1985-01-01

Some authors proposed mathematical models that, starting from standardized conditions of environmental microclimate parameters, thermal impedance of the clothing, and energetic expenditure allowed the forecast of the body temperature and heart rate variations in respect to the basal values in subjects standing in the same environment. In the present work we verify the usefulness of these models applied to the working tasks characterized by standardized job made under unfavourable thermal conditions. In subject working in an electric power station the values of the body temperature and heart rate are registered and compared with the values obtained by the application of the studied models. The results are discussed in view of the practical use.

On the phenomenon of curved microcracks in /(S)/90n/s laminates - Their shapes, initiation angles and locations

NASA Technical Reports Server (NTRS)

Hu, Shoufeng; Bark, Jong S.; Nairn, John A.

1993-01-01

A variational analysis of the stress state in microcracked cross-ply laminates has been used to investigate the phenomenon of curved microcracking in /(S)/90n/s laminates. Previous investigators proposed that the initiation and orientation of curved microcracks are controlled by local maxima and stress trajectories of the principal stresses. We have implemented a principal stress model using a variational mechanics stress analysis and we were able to make predictions about curved microcracks. The predictions agree well with experimental observations and therefore support the assertion that the variational analysis gives an accurate stress state that is useful for modeling the microcracking properties of cross-ply laminates. An important prediction about curved microcracks is that they are a late stage of microcracking damage. They occur only when the crack density of straight microcracks exceeds the critical crack density for curved microcracking. The predicted critical crack density for curved microcracking agrees well with experimental observations.

Automatic measurement and representation of prosodic features

NASA Astrophysics Data System (ADS)

Ying, Goangshiuan Shawn

Effective measurement and representation of prosodic features of the acoustic signal for use in automatic speech recognition and understanding systems is the goal of this work. Prosodic features-stress, duration, and intonation-are variations of the acoustic signal whose domains are beyond the boundaries of each individual phonetic segment. Listeners perceive prosodic features through a complex combination of acoustic correlates such as intensity, duration, and fundamental frequency (F0). We have developed new tools to measure F0 and intensity features. We apply a probabilistic global error correction routine to an Average Magnitude Difference Function (AMDF) pitch detector. A new short-term frequency-domain Teager energy algorithm is used to measure the energy of a speech signal. We have conducted a series of experiments performing lexical stress detection on words in continuous English speech from two speech corpora. We have experimented with two different approaches, a segment-based approach and a rhythm unit-based approach, in lexical stress detection. The first approach uses pattern recognition with energy- and duration-based measurements as features to build Bayesian classifiers to detect the stress level of a vowel segment. In the second approach we define rhythm unit and use only the F0-based measurement and a scoring system to determine the stressed segment in the rhythm unit. A duration-based segmentation routine was developed to break polysyllabic words into rhythm units. The long-term goal of this work is to develop a system that can effectively detect the stress pattern for each word in continuous speech utterances. Stress information will be integrated as a constraint for pruning the word hypotheses in a word recognition system based on hidden Markov models.

Effect of thermal and mechanical parameter’s damage numerical simulation cycling effects on defects in hot metal forming processes

NASA Astrophysics Data System (ADS)

El Amri, Abdelouahid; el yakhloufi Haddou, Mounir; Khamlichi, Abdellatif

2017-10-01

Damage mechanisms in hot metal forming processes are accelerated by mechanical stresses arising during Thermal and mechanical properties variations, because it consists of the materials with different thermal and mechanical loadings and swelling coefficients. In this work, 3D finite element models (FEM) are developed to simulate the effect of Temperature and the stresses on the model development, using a general purpose FE software ABAQUS. Explicit dynamic analysis with coupled Temperature displacement procedure is used for a model. The purpose of this research was to study the thermomechanical damage mechanics in hot forming processes. The important process variables and the main characteristics of various hot forming processes will also be discussed.

Sex Differences in Drug-Related Stress-System Changes: Implications for Treatment in Substance-Abusing Women

PubMed Central

Fox, Helen C.; Sinha, Rajita

2009-01-01

Extensive research indicates that chronic substance abuse disrupts stress and reward systems of the brain. Gender variation within these stress-system alterations, including the impact of sex hormones on these changes, may influence sex-specific differences in both the development of, and recovery from, dependency. As such, gender variations in stress-system function may also provide a viable explanation for why women are markedly more vulnerable than men to the negative consequences of drug use. This article therefore initially reviews studies that have examined gender differences in emotional and biophysiological changes to the stress and reward system following the acute administration of drugs, including cocaine, alcohol, and nicotine. The article then reviews studies that have examined gender differences in response to various types of stress in both healthy and drug-abusing populations. Studies examining the impact of sex hormones on these gender-related responses are also reported. The implications of these sex-specific variations in stress and reward system function are discussed in terms of both comorbid psychopathology and treatment outcome. PMID:19373619

Influence of peak oral temperatures on veneer–core interface stress state

PubMed Central

Marrelli, Massimo; Pujia, Antonella; Apicella, Davide; Sansalone, Salvatore; Tatullo, Marco

2015-01-01

Abstract Objective: There is a growing interest for the use of Y-TZP zirconia as core material in veneered all-ceramic prostheses. The objective of this study was to evaluate the influence of CET on the stress distribution of a porcelain layered to zirconia core single crowns by finite elements analysis. Material and methods: CET of eight different porcelains was considered during the analysis. Results: Results of this study indicated that the mismatch in CET between the veneering porcelain and the Y-TZP zirconia core has to be minimum (0.5–1 μm/mK) so as to decrease the growing of residual stresses which could bring chipping. Conclusions: The stress state due to temperature variation should be carefully taken into consideration while studying the effect of mechanical load on zirconia core crown by FEA. The interfacial stress state can be increased by temperature variation up to 20% with respect to the relative failure parameter (interface strength in this case). This means that stress due to mechanical load combined to temperature variation-induced stress can lead porcelain veneer–zirconia core interfaces to failure. PMID:28642897

A focus on natural variation for abiotic constraints response in the model species Arabidopsis thaliana.

PubMed

Lefebvre, Valérie; Kiani, Seifollah Poormohammad; Durand-Tardif, Mylène

2009-08-13

Plants are particularly subject to environmental stress, as they cannot move from unfavourable surroundings. As a consequence they have to react in situ. In any case, plants have to sense the stress, then the signal has to be transduced to engage the appropriate response. Stress response is effected by regulating genes, by turning on molecular mechanisms to protect the whole organism and its components and/or to repair damage. Reactions vary depending on the type of stress and its intensity, but some are commonly turned on because some responses to different abiotic stresses are shared. In addition, there are multiple ways for plants to respond to environmental stress, depending on the species and life strategy, but also multiple ways within a species depending on plant variety or ecotype. It is regularly accepted that populations of a single species originating from diverse geographic origins and/or that have been subjected to different selective pressure, have evolved retaining the best alleles for completing their life cycle. Therefore, the study of natural variation in response to abiotic stress, can help unravel key genes and alleles for plants to cope with their unfavourable physical and chemical surroundings. This review is focusing on Arabidopsis thaliana which has been largely adopted by the global scientific community as a model organism. Also, tools and data that facilitate investigation of natural variation and abiotic stress encountered in the wild are set out. Characterization of accessions, QTLs detection and cloning of alleles responsible for variation are presented.

The Correction of Fiber Throughput Variation due to Focal Ratio Degradation

NASA Astrophysics Data System (ADS)

Chen, Jianjun; Bai, Zhongrui; Li, Guangwei; Zhang, Haotong

2014-01-01

The focal ratio degradation (FRD) of optical fibers is a major source causing light loss to astronomical multi-fibre instruments like LAMOST (Oliveira, A. C, et al. 2005). The effects of stress and twist during mounting and rotation of the fibers could change the FRD for individual fibers (Clayton 1989), which means that the transmission efficiency of each individual fiber will vary. We investigate such throughput variation among LAMOST fibers and its relevance to the intensity of sky emission lines (Garstang 1989) over the full wavelength coverage. On the basis of the work, we present an approach to correct the varied fiber throughput by measuring the strength of the sky emission lines as the secondary throughput correction.

Effect of coating material on heat transfer and skin friction due to impinging jet onto a laser producedhole

NASA Astrophysics Data System (ADS)

Shuja, S. Z.; Yilbas, B. S.

2013-07-01

Jet impingement onto a two-layer structured hole in relation to laser drilling is investigated. The hole consists of a coating layer and a base material. The variations in the Nusselt number and the skin friction are predicted for various coating materials. The Reynolds stress turbulent model is incorporated to account for the turbulence effect of the jet flow and nitrogen is used as the working fluid. The study is extended to include two jet velocities emanating from the conical nozzle. It is found that coating material has significant effect on the Nusselt number variation along the hole wall. In addition, the skin friction varies considerably along the coating thickness in thehole.

Heritable stress response dynamics revealed by single-cell genealogy

PubMed Central

2018-01-01

Cells often respond to environmental stimuli by activating specific transcription factors. Upon exposure to glucose limitation stress, it is known that yeast Saccharomyces cerevisiae cells dephosphorylate the general stress response factor Msn2, leading to its nuclear localization, which in turn activates the expression of many genes. However, the precise dynamics of Msn2 nucleocytoplasmic translocations and whether they are inherited over multiple generations in a stress-dependent manner are not well understood. Tracking Msn2 localization events in yeast lineages grown on a microfluidic chip, here we report how cells modulate the amplitude, duration, frequency, and dynamic pattern of the localization events in response to glucose limitation stress. Single yeast cells were found to modulate the amplitude and frequency of Msn2 nuclear localization, but not its duration. Moreover, the Msn2 localization frequency was epigenetically inherited in descendants of mother cells, leading to a decrease in cell-to-cell variation in localization frequency. An analysis of the time dynamic patterns of nuclear localizations between genealogically related cell pairs using an information theory approach found that the magnitude of pattern similarity increased with stress intensity and was strongly inherited by the descendant cells at the highest stress level. By dissecting how general stress response dynamics is contributed by different modulation schemes over long time scales, our work provides insight into which scheme evolution might have acted on to optimize fitness in stressful environments. PMID:29675464

Theoretical and experimental evaluation of effective stress-induced sorption capacity change and its influence on coal permeability

NASA Astrophysics Data System (ADS)

Li, Chengwu; Dong, Lihui; Xu, Xiaomeng; Hu, Po; Tian, Jianwei; Zhang, Yihuai; Yang, Leilei

2017-06-01

The gas sorption effect is an important factor affecting the gas permeability of a coal seam, which has been proved in many previous experimental measurements and analytical permeability studies. However, the sorption capacity of coal is usually not static due to the complexity of external stress variation and internal gas media features. The stress-induced sorption capacity variation and its effect on the coal permeability change have not been fully identified yet. Thus, in this paper we present a preliminary evaluation of the stress-induced sorption capacity change by introducing the adsorption capacity modified term, and an experiment is carried out to verify the influence of the altered effective stress on coal permeability. Langmuir-like adsorption deformation constant parameters were combined into the modified coal permeability model and were given values to fully estimate the influence on permeability caused by the modification term. We found that different change modes of effective stress would yield different change effects on the permeability, that is, with the same effective stress change amount, the altered external stress-induced change had less influence than the altered-pore pressure-induced change; however, both modes demonstrated that the model taking sorption capacity change into consideration is more consistent with the experimental data. The effect of sorption capacity change on coal permeability variation was also found to be tightly connected with the physical and mechanical properties of the coal itself. It is proved that considering stress-induced sorption ability change has a critical role in characterizing the permeability variation of coal.

Synchrotron-based measurement of the impact of thermal cycling on the evolution of stresses in Cu through-silicon vias

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okoro, Chukwudi, E-mail: chukwudi.okoro@nist.gov; Obeng, Yaw; Levine, Lyle E.

2014-06-28

One of the main causes of failure during the lifetime of microelectronics devices is their exposure to fluctuating temperatures. In this work, synchrotron-based X-ray micro-diffraction is used to study the evolution of stresses in copper through-silicon via (TSV) interconnects, “as-received” and after 1000 thermal cycles. For both test conditions, significant fluctuations in the measured normal and shear stresses with depth are attributed to variations in the Cu grain orientation. Nevertheless, the mean hydrostatic stresses in the “as-received” Cu TSV were very low, at (16 ± 44) MPa, most likely due to room temperature stress relaxation. In contrast, the mean hydrostatic stresses alongmore » the entire length of the Cu TSV that had undergone 1000 thermal cycles (123 ± 37) MPa were found to be eight times greater, which was attributed to increased strain-hardening. The evolution in stresses with thermal cycling is a clear indication that the impact of Cu TSVs on front-end-of-line (FEOL) device performance will change through the lifetime of the 3D stacked dies, and ought to be accounted for during FEOL keep-out-zone design rules development.« less

On the continuity of mean total normal stress in geometrical multiscale cardiovascular problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blanco, Pablo J., E-mail: pjblanco@lncc.br; INCT-MACC, Instituto Nacional de Ciência e Tecnologia em Medicina Assistida por Computação Científica, Petrópolis; Deparis, Simone, E-mail: simone.deparis@epfl.ch

2013-10-15

In this work an iterative strategy to implicitly couple dimensionally-heterogeneous blood flow models accounting for the continuity of mean total normal stress at interface boundaries is developed. Conservation of mean total normal stress in the coupling of heterogeneous models is mandatory to satisfy energetic consistency between them. Nevertheless, existing methodologies are based on modifications of the Navier–Stokes variational formulation, which are undesired when dealing with fluid–structure interaction or black box codes. The proposed methodology makes possible to couple one-dimensional and three-dimensional fluid–structure interaction models, enforcing the continuity of mean total normal stress while just imposing flow rate data or evenmore » the classical Neumann boundary data to the models. This is accomplished by modifying an existing iterative algorithm, which is also able to account for the continuity of the vessel area, when required. Comparisons are performed to assess differences in the convergence properties of the algorithms when considering the continuity of mean normal stress and the continuity of mean total normal stress for a wide range of flow regimes. Finally, examples in the physiological regime are shown to evaluate the importance, or not, of considering the continuity of mean total normal stress in hemodynamics simulations.« less

Strength analysis and lightweight research of a fertilizing and soil covering vehicle

NASA Astrophysics Data System (ADS)

Sun, Heng-Hui; Zhang, Zheng-Yong; Liu, Yang; Xu, Hai-Ming; Chen, En-Wei

2018-03-01

In this paper, parametric modeling is carried out for the frame part of a kind of fertilizing and soil covering vehicle to define boundary conditions such as load, constraint, etc. when the frame is under the working condition of normal full load. ANSYS software is used to produce finite element model of frame, and to analyze and solve the model, so as to obtain stress and stain variation diagram of each part of frame under working condition of normal full load. The calculation result shows that: the structure of frame is able to meet the strength requirement, and the maximum value of stress is located at joint between frame and external hinge, which should be appropriately improved in thickening way. According to the result of finite element, the scheme with size optimization is employed to design the frame in lightweight way. The research result of this paper provides the theoretical basis for the design of frame of fertilizing and soil covering vehicle, which has deep theoretical significance and application value.

Stress-strain state of the lithosphere in the southern Baikal region and northern Mongolia from data on seismic moments of earthquakes

NASA Astrophysics Data System (ADS)

Klyuchevskii, A. V.; Dem'yanovich, V. M.

2006-05-01

Investigation and understanding of the present-day geodynamic situation are of key importance for the elucidation of the laws and evolution of the seismic process in a seismically active region. In this work, seismic moments of nearly 26000 earthquakes with K p ≥ 7 ( M LH ≥ 2) that occurred in the southern Baikal region and northern Mongolia (SBNM) (48° 54°N, 96° 108°E) from 1968 through 1994 are determined from amplitudes and periods of maximum displacements in transverse body waves. The resulting set of seismic moments is used for spatial-temporal analysis of the stress-strain state of the SBNM lithosphere. The stress fields of the Baikal rift and the India-Asia collision zone are supposed to interact in the region studied. Since the seismic moment of a tectonic earthquake depends on the type of motion in the source, seismic moments and focal mechanisms of earthquakes belonging to four long-term aftershock and swarm clusters of shocks in the Baikal region were used to “calibrate” average seismic moments in accordance with the source faulting type. The study showed that the stress-strain state of the SBNM lithosphere is spatially inhomogeneous and nonstationary. A space-time discrepancy is observed in the formation of faulting types in sources of weak ( K p = 7 and 8) and stronger ( K p ≥ 9) earthquakes. This discrepancy is interpreted in terms of rock fracture at various hierarchical levels of ruptures on differently oriented general, regional, and local faults. A gradual increase and an abrupt, nearly pulsed, decrease in the vertical component of the stress field S v is a characteristic feature of time variations. The zones where the stress S v prevails are localized at “singular points” of the lithosphere. Shocks of various energy classes in these zones are dominated by the normal-fault slip mechanism. For earthquakes with K p = 9, the source faulting changes with depth from the strike-slip type to the normal-strike-slip and normal types, suggesting an increase in S v . On the whole, the results of this study are well consistent with the synergism of open unstable dissipative systems and are usable for interpreting the main observable variations in the stress-strain state of the lithosphere in terms of spatiotemporal variations in the vertical component of the stress field S v . This suggests the influence of rifting on the present-day geodynamic processes in the SBNM lithosphere.

Spatial variation of present-day stress field and tectonic regime in Tunisia and surroundings from formal inversion of focal mechanisms: Geodynamic implications for central Mediterranean

NASA Astrophysics Data System (ADS)

Soumaya, Abdelkader; Ben Ayed, Noureddine; Delvaux, Damien; Ghanmi, Mohamed

2015-06-01

We compiled 123 focal mechanisms from various sources for Tunisia and adjacent regions up to Sicily, to image the current stress field in the Maghrebides chain (from Tunisia to Sicily) and its foreland. Stress inversion of all the available data provides a first-order stress field with a N150°E horizontal compression (SHmax) and a transpressional tectonic regime, but the obtained stress tensor poorly fit to the data set. We separated them into regional subsets (boxes) in function of their geographical proximity, kinematic regime, homogeneity of kinematic orientations, and tectonic setting. Their respective inversion evidences second- and third-order spatial variations in tectonic regime and horizontal stress directions. The stress field gradually changes from compression in the Maghrebides thrust belt to transpression and strike slip in the Atlassic and Pelagian foreland, respectively, where preexisting NW-SE to E-W deep faults system are reactivated. This spatial variation of the sismotectonic stress field and tectonic regime is consistent with the neotectonic stress field determined by others from fault slip data. The major Slab Transfer Edge Propagator faults (i.e., North-South Axis-Hammamet relay and Malte Escarpment), which laterally delimit the subducting slabs, play an active role in second- and third-order lateral variations of the tectonic regime and stress field orientations over the Tunisian/Sicilian domain. The past and current tectonic deformations and kinematics of the central Mediterranean are subordinately guided by the plate convergence (i.e., Africa-Eurasia), controlled or influenced by lateral slab migration/segmentation and by deep dynamics such as lithosphere-mantle interaction.

Thermo-mechanical assessment of full SiC/SiC composite cladding for LWR applications with sensitivity analysis

NASA Astrophysics Data System (ADS)

Singh, Gyanender; Terrani, Kurt; Katoh, Yutai

2018-02-01

SiC/SiC composites are considered among leading candidates for accident tolerant fuel cladding in light water reactors. However, when SiC-based materials are exposed to neutron irradiation, they experience significant changes in dimensions and physical properties. Under a large heat flux application (i.e. fuel cladding), the non-uniform changes in the dimensions and physical properties will lead to build-up of stresses in the structure over the course of time. To ensure reliable and safe operation of such a structure it is important to assess its thermo-mechanical performance under in-reactor conditions of irradiation and elevated temperature. In this work, the foundation for 3D thermo-mechanical analysis of SiC/SiC cladding is put in place and a set of analyses with simplified boundary conditions has been performed. The analyses were carried out with two different codes that were benchmarked against one another and prior results in the literature. A constitutive model is constructed and solved numerically to predict the stress distribution and variation in the cladding under normal operating conditions. The dependence of dimensions and physical properties variation with irradiation and temperature has been incorporated. These robust models may now be modified to take into account the axial and circumferential variation in neutron and heat flux to fully account for 3D effects. The results from the simple analyses show the development of high tensile stresses especially in the circumferential and axial directions at the inner region of the cladding. Based on the results obtained, design guidelines are recommended. For lack of certainty in or tailor-ability for the physical and mechanical properties of SiC/SiC composite material a sensitivity analysis is conducted. The analysis results establish a precedence order of the properties based on the extent to which these properties influence the temperature and the stresses.

A Polymer Optical Fiber Temperature Sensor Based on Material Features.

PubMed

Leal-Junior, Arnaldo; Frizera-Netoc, Anselmo; Marques, Carlos; Pontes, Maria José

2018-01-19

This paper presents a polymer optical fiber (POF)-based temperature sensor. The operation principle of the sensor is the variation in the POF mechanical properties with the temperature variation. Such mechanical property variation leads to a variation in the POF output power when a constant stress is applied to the fiber due to the stress-optical effect. The fiber mechanical properties are characterized through a dynamic mechanical analysis, and the output power variation with different temperatures is measured. The stress is applied to the fiber by means of a 180° curvature, and supports are positioned on the fiber to inhibit the variation in its curvature with the temperature variation. Results show that the sensor proposed has a sensitivity of 1.04 × 10 -3 °C -1 , a linearity of 0.994, and a root mean squared error of 1.48 °C, which indicates a relative error of below 2%, which is lower than the ones obtained for intensity-variation-based temperature sensors. Furthermore, the sensor is able to operate at temperatures up to 110 °C, which is higher than the ones obtained for similar POF sensors in the literature.

Environmentally induced (co)variance in sperm and offspring phenotypes as a source of epigenetic effects.

PubMed

Marshall, Dustin J

2015-01-01

Traditionally, it has been assumed that sperm are a vehicle for genes and nothing more. As such, the only source of variance in offspring phenotype via the paternal line has been genetic effects. More recently, however, it has been shown that the phenotype or environment of fathers can affect the phenotype of offspring, challenging traditional theory with implications for evolution, ecology and human in vitro fertilisation. Here, I review sources of non-genetic variation in the sperm phenotype and evidence for co-variation between sperm and offspring phenotypes. I distinguish between two environmental sources of variation in sperm phenotype: the pre-release environment and the post-release environment. Pre-release, sperm phenotypes can vary within species according to male phenotype (e.g. body size) and according to local conditions such as the threat of sperm competition. Post-release, the physicochemical conditions that sperm experience, either when freely spawned or when released into the female reproductive tract, can further filter or modify sperm phenotypes. I find evidence that both pre- and post-release sperm environments can affect offspring phenotype; fertilisation is not a new beginning – rather, the experiences of sperm with the father and upon release can drive variation in the phenotype of the offspring. Interestingly, there was some evidence for co-variation between the stress resistance of sperm and the stress resistance of offspring, though more studies are needed to determine whether such effects are widespread. Overall, it appears that environmentally induced covariation between sperm and offspring phenotypes is non-negligible and further work is needed to determine their prevalence and strength. © 2015. Published by The Company of Biologists Ltd.

Neonatal Intensive Care Unit Safety Culture Varies Widely

PubMed Central

Profit, Jochen; Etchegaray, Jason; Petersen, Laura A; Sexton, J Bryan; Hysong, Sylvia J; Mei, Minghua; Thomas, Eric J

2013-01-01

background Variation in health care delivery and outcomes in NICUs may be partly explained by differences in safety culture. objective To describe NICU caregiver assessments of safety culture, explore the variability within and between NICUs on safety culture domains, and test for association with caregiver characteristics. methods We surveyed NICU caregivers in a convenience sample of 12 hospitals from a single health care system, using the Safety Attitudes Questionnaire (SAQ). The six scales of the SAQ include teamwork climate, safety climate, job satisfaction, stress recognition, perception of management, and working conditions. For each NICU we calculated scale means, standard deviations and percent positives (percent agreement). results We found substantial variation in safety culture domains among participating NICUs. A composite mean score across the six safety culture domains ranged from 56.3 to 77.8 on a 100-point scale and NICUs in the top four NICUs were significantly different from the bottom four (p < .001). Across the six domains, respondent assessments varied widely, but were least positive on perceptions of management (3–80% positive; mean 33.3%) and stress recognition (18–61% positive; mean 41.3%). Comparisons of SAQ scale scores between NICUs and a previously published cohort of adult ICUs generally revealed higher scores for NICUs. Physicians composite scores were 8.2 (p = .04) and 9.5 (p =.02) points higher than nurses and ancillary personnel. conclusion Significant variation and scope for improvement in safety culture exists among this sample of NICUs. The NICU variation was similar to variation in adult ICUs, but NICU scores were generally higher than adult ICU scores. Future studies should validate whether safety culture as measured with the SAQ correlates with clinical and operational outcomes in the NICU setting. PMID:21930691

Herbal Extracts That Reduce Ocular Oxidative Stress May Enhance Attentive Performance in Humans.

PubMed

Cho, Hohyun; Kwon, Moonyoung; Jang, Hyojung; Lee, Jee-Bum; Yoon, Kyung Chul; Jun, Sung Chan

2016-01-01

We used herbal extracts in this study to investigate the effects of blue-light-induced oxidative stress on subjects' attentive performance, which is also associated with work performance. We employed an attention network test (ANT) to measure the subjects' work performance indirectly and used herbal extracts to reduce ocular oxidative stress. Thirty-two subjects participated in either an experimental group (wearing glasses containing herbal extracts) or a control group (wearing glasses without herbal extracts). During the ANT experiment, we collected electroencephalography (EEG) and electrooculography (EOG) data and measured button responses. In addition, electrocardiogram (ECG) data were collected before and after the experiments. The EOG results showed that the experimental group exhibited a reduced number of eye blinks per second during the experiment and faster button responses with a smaller variation than did the control group; this group also showed relatively more sustained tension in their ECG results. In the EEG analysis, the experimental group had significantly greater cognitive processing, with larger P300 and parietal 2-6 Hz activity, an orienting effect with neural processing of frontal area, high beta activity in the occipital area, and an alpha and beta recovery process after the button response. We concluded that reducing blue-light-induced oxidative stress with herbal extracts may be associated with reducing the number of eye blinks and enhancing attentive performance.

Microscopic Optical Characterization of Free Standing III-Nitride Substrates, ZnO Bulk Crystals, and III-V Structures for Non-Linear Optics

DTIC Science & Technology

2013-03-01

necessary. Therefore, a study of the main defects involved in these materials is essential to the understanding of their main properties and to...working with various strains, growth conditions, temperature variation, and impurities, and studies crystal growth parameters necessary to improve the...Sirtl applied with Light), and the stress distribution around the domain walls. This study shows how to improve the crystal quality of the OP GaAs

Core clock, SUB1, and ABAR genes mediate flooding and drought responses via alternative splicing in soybean.

PubMed

Syed, Naeem H; Prince, Silvas J; Mutava, Raymond N; Patil, Gunvant; Li, Song; Chen, Wei; Babu, Valliyodan; Joshi, Trupti; Khan, Saad; Nguyen, Henry T

2015-12-01

Circadian clocks are a great evolutionary innovation and provide competitive advantage during the day/night cycle and under changing environmental conditions. The circadian clock mediates expression of a large proportion of genes in plants, achieving a harmonious relationship between energy metabolism, photosynthesis, and biotic and abiotic stress responses. Here it is shown that multiple paralogues of clock genes are present in soybean (Glycine max) and mediate flooding and drought responses. Differential expression of many clock and SUB1 genes was found under flooding and drought conditions. Furthermore, natural variation in the amplitude and phase shifts in PRR7 and TOC1 genes was also discovered under drought and flooding conditions, respectively. PRR3 exhibited flooding- and drought-specific splicing patterns and may work in concert with PRR7 and TOC1 to achieve energy homeostasis under flooding and drought conditions. Higher expression of TOC1 also coincides with elevated levels of abscisic acid (ABA) and variation in glucose levels in the morning and afternoon, indicating that this response to abiotic stress is mediated by ABA, endogenous sugar levels, and the circadian clock to fine-tune photosynthesis and energy utilization under stress conditions. It is proposed that the presence of multiple clock gene paralogues with variation in DNA sequence, phase, and period could be used to screen exotic germplasm to find sources for drought and flooding tolerance. Furthermore, fine tuning of multiple clock gene paralogues (via a genetic engineering approach) should also facilitate the development of flooding- and drought-tolerant soybean varieties. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

AN INVERSE MODELING APPROACH FOR STRESS ESTIMATION IN MITRAL VALVE ANTERIOR LEAFLET VALVULOPLASTY FOR IN-VIVO VALVULAR BIOMATERIAL ASSESSMENT

PubMed Central

Lee, Chung-Hao; Amini, Rouzbeh; Gorman, Robert C.; Gorman, Joseph H.; Sacks, Michael S.

2013-01-01

Estimation of regional tissue stresses in the functioning heart valve remains an important goal in our understanding of normal valve function and in developing novel engineered tissue strategies for valvular repair and replacement. Methods to accurately estimate regional tissue stresses are thus needed for this purpose, and in particular to develop accurate, statistically informed means to validate computational models of valve function. Moreover, there exists no currently accepted method to evaluate engineered heart valve tissues and replacement heart valve biomaterials undergoing valvular stresses in blood contact. While we have utilized mitral valve anterior leaflet valvuloplasty as an experimental approach to address this limitation, robust computational techniques to estimate implant stresses are required. In the present study, we developed a novel numerical analysis approach for estimation of the in-vivo stresses of the central region of the mitral valve anterior leaflet (MVAL) delimited by a sonocrystal transducer array. The in-vivo material properties of the MVAL were simulated using an inverse FE modeling approach based on three pseudo-hyperelastic constitutive models: the neo-Hookean, exponential-type isotropic, and full collagen-fiber mapped transversely isotropic models. A series of numerical replications with varying structural configurations were developed by incorporating measured statistical variations in MVAL local preferred fiber directions and fiber splay. These model replications were then used to investigate how known variations in the valve tissue microstructure influence the estimated ROI stresses and its variation at each time point during a cardiac cycle. Simulations were also able to include estimates of the variation in tissue stresses for an individual specimen dataset over the cardiac cycle. Of the three material models, the transversely anisotropic model produced the most accurate results, with ROI averaged stresses at the fully-loaded state of 432.6±46.5 kPa and 241.4±40.5 kPa in the radial and circumferential directions, respectively. We conclude that the present approach can provide robust instantaneous mean and variation estimates of tissue stresses of the central regions of the MVAL. PMID:24275434

ERP evidence for implicit L2 word stress knowledge in listeners of a fixed-stress language.

PubMed

Kóbor, Andrea; Honbolygó, Ferenc; Becker, Angelika B C; Schild, Ulrike; Csépe, Valéria; Friedrich, Claudia K

2018-06-01

Languages with contrastive stress, such as English or German, distinguish some words only via the stress status of their syllables, such as "CONtent" and "conTENT" (capitals indicate a stressed syllable). Listeners with a fixed-stress native language, such as Hungarian, have difficulties in explicitly discriminating variation of the stress position in a second language (L2). However, Event-Related Potentials (ERPs) indicate that Hungarian listeners implicitly notice variation from their native fixed-stress pattern. Here we used ERPs to investigate Hungarian listeners' implicit L2 processing. In a cross-modal word fragment priming experiment, we presented spoken stressed and unstressed German word onsets (primes) followed by printed versions of initially stressed and initially unstressed German words (targets). ERPs reflected stress priming exerted by both prime types. This indicates that Hungarian listeners implicitly linked German words with the stress status of the primes. Thus, the formerly described explicit stress discrimination difficulty associated with a fixed-stress native language does not generalize to implicit aspects of L2 word stress processing. Copyright © 2018 Elsevier B.V. All rights reserved.

Does infectious disease cause global variation in the frequency of intrastate armed conflict and civil war?

PubMed

Letendre, Kenneth; Fincher, Corey L; Thornhill, Randy

2010-08-01

Geographic and cross-national variation in the frequency of intrastate armed conflict and civil war is a subject of great interest. Previous theory on this variation has focused on the influence on human behaviour of climate, resource competition, national wealth, and cultural characteristics. We present the parasite-stress model of intrastate conflict, which unites previous work on the correlates of intrastate conflict by linking frequency of the outbreak of such conflict, including civil war, to the intensity of infectious disease across countries of the world. High intensity of infectious disease leads to the emergence of xenophobic and ethnocentric cultural norms. These cultures suffer greater poverty and deprivation due to the morbidity and mortality caused by disease, and as a result of decreased investment in public health and welfare. Resource competition among xenophobic and ethnocentric groups within a nation leads to increased frequency of civil war. We present support for the parasite-stress model with regression analyses. We find support for a direct effect of infectious disease on intrastate armed conflict, and support for an indirect effect of infectious disease on the incidence of civil war via its negative effect on national wealth. We consider the entanglements of feedback of conflict into further reduced wealth and increased incidence of disease, and discuss implications for international warfare and global patterns of wealth and imperialism.

Genetic Variations of Physiological Responses Following Heat Stress in Laying Hens

USDA-ARS?s Scientific Manuscript database

Heat stress (HS), also known as hyperthermia, is a major problem experienced by poultry during high-temperature conditions. The ability to manage the detrimental effects of HS can be attributed to many factors, including genetics. The objective of the present study was to determine the variation of ...

Effects of changing stress states on the development of caldera-bounding faults: Geological evidence from Kumano caldera, Japan

NASA Astrophysics Data System (ADS)

Miura, Daisuke

2005-06-01

Collapse of a large caldera can cause spatial and temporal perturbations of stress, and formation of "caldera faults." The stress variations influence the direction of slip vectors on the fault planes; hence, stress estimation is important for the study of caldera-forming processes. In our paleostress estimation, the stress variations in the collapse of the ca. 14 Ma Kumano caldera in Japan have been revealed. A stress inversion method based on the Wallace-Bott hypothesis was used to compute the orientation of the principal stress axes ( σ1≥ σ2≥ σ3) and the stress ratio ϕ=( σ2- σ3)/( σ1- σ3), where 0≤ ϕ≤1. The caldera faults formed simultaneously with the caldera-forming ash-flow tuff eruption. Therefore, paleostress solutions obtained from slip data measured on such faults show the spatial and temporal changes of the stress at the time of the caldera collapse. The computed stress ratio ϕ characterizes a pair of stress fields. In the early stage, the stress field with ϕ˜1.0 shows a semi-radial trajectory of stress σ2 and an eastern concentric trajectory of stress σ3. This stress regime, resulting from pre-collapse tumescence, counteracts the gravitational force and thus produces smaller net vertical stress. The regional tumescence above an inflated magma chamber is the most plausible source of the stress field, and it is consistent with the timing of the caldera formation. In the late stage, the stress field with ϕ˜0.5 shows the semi-radial trajectory of stress σ2 and the west-convex and concentric trajectory of stress σ3. Change of the stress ratio ϕ from 1.0 to 0.5 implies that increase in the relative magnitude of the stress σ1 caused the deeper subsidence of the caldera floor. Stress variations may be of significant value for reconstructing the structural history of the caldera.

Adversity, time, and well-being: A longitudinal analysis of time perspective in adulthood.

PubMed

Holman, E Alison; Silver, Roxane Cohen; Mogle, Jacqueline A; Scott, Stacey B

2016-09-01

Despite the prominence of time in influential aging theories and the ubiquity of stress across the life span, research addressing how time perspective (TP) and adversity are associated with well-being across adulthood is rare. Examining the role of TP in coping with life events over the life span would be best accomplished after large-scale population-based exposure to a specific event, with repeated assessments to examine within- and between-person differences over time. A national sample aged 18-91 years (N = 722, M = 49.4 years) was followed for 3 years after the September 11, 2001 (9/11) terrorist attacks. Respondents completed assessments of 9/11-related television (TV) exposure 9-21 days after the attacks, temporal disintegration 2 months post-9/11, and TP, ongoing stress, and well-being at 12, 24, and 36 months post-9/11. Results provided support for measurement invariance of TP across time and across age. Early 9/11-related TV exposure was significantly associated with greater temporal disintegration. Temporal disintegration and ongoing stress, in turn, were associated with between- and within-person variation in past TP. This effect was qualified by an age interaction that indicated a stronger relationship between ongoing stress and past TP for younger compared with older adults. Past and future TP were significantly and independently related to individual differences and within-person variation in psychological well-being, regardless of age. Future work should incorporate adversity as an important correlate of TP across adulthood. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Elastic constants of stressed and unstressed materials in the phase-field crystal model

NASA Astrophysics Data System (ADS)

Wang, Zi-Le; Huang, Zhi-Feng; Liu, Zhirong

2018-04-01

A general procedure is developed to investigate the elastic response and calculate the elastic constants of stressed and unstressed materials through continuum field modeling, particularly the phase-field crystal (PFC) models. It is found that for a complete description of system response to elastic deformation, the variations of all the quantities of lattice wave vectors, their density amplitudes (including the corresponding anisotropic variation and degeneracy breaking), the average atomic density, and system volume should be incorporated. The quantitative and qualitative results of elastic constant calculations highly depend on the physical interpretation of the density field used in the model, and also importantly, on the intrinsic pressure that usually pre-exists in the model system. A formulation based on thermodynamics is constructed to account for the effects caused by constant pre-existing stress during the homogeneous elastic deformation, through the introducing of a generalized Gibbs free energy and an effective finite strain tensor used for determining the elastic constants. The elastic properties of both solid and liquid states can be well produced by this unified approach, as demonstrated by an analysis for the liquid state and numerical evaluations for the bcc solid phase. The numerical calculations of bcc elastic constants and Poisson's ratio through this method generate results that are consistent with experimental conditions, and better match the data of bcc Fe given by molecular dynamics simulations as compared to previous work. The general theory developed here is applicable to the study of different types of stressed or unstressed material systems under elastic deformation.

Mothers of children with developmental disabilities: stress in early and middle childhood.

PubMed

Azad, Gazi; Blacher, Jan; Marcoulides, George A

2013-10-01

Using a sample of 219 families of children with (n=94) and without (n=125) developmental disabilities, this study examined the longitudinal perspectives of maternal stress in early (ages 3-5) and middle childhood (ages 6-13) and its relationship to mothers' and children's characteristics. Multivariate latent curve models indicated that maternal stress remained high and stable with minimal individual variation in early childhood, but declined with significant individual variation in middle childhood. Maternal stress at the beginning of middle childhood was associated with earlier maternal stress, as well as children's behavioral problems and social skills. The trajectory of maternal stress across middle childhood was related to children's behavioral problems. Implications for interventions are discussed. Copyright © 2013. Published by Elsevier Ltd.

Stress analysis of ZrO2/SiO2 multilayers deposited on different substrates with different thickness periods

NASA Astrophysics Data System (ADS)

Shao, Shuying; Shao, Jianda; He, Hongbo; Fan, Zhengxiu

2005-08-01

The effects of repeating thickness periods on stress are studied in ZrO2/SiO2 multilayers deposited by electron-beam evaporation on BK7 glass and fused-silica substrates. The results show that the residual stress is compressive and decreases with an increase of the periods of repeating thickness in the ZrO2/SiO2 multilayers. At the same time, the residual stress in multilayers deposited on BK7 glass is less than that of samples deposited on fused silica. The variation of the microstructure examined by x-ray diffraction shows that microscopic deformation does not correspond to macroscopic stress, which may be due to variation of the interface stress.

Extremely high wall-shear stress events in a turbulent boundary layer

NASA Astrophysics Data System (ADS)

Pan, Chong; Kwon, Yongseok

2018-04-01

The present work studies the fluctuating characteristics of the streamwise wall-shear stress in a DNS of a turbulent boundary layer at Re τ =1500 from a structural view. The two-dimensional field of the fluctuating friction velocity u‧ τ (x,z) is decomposed into the large- and small-scale components via a recently proposed scale separation algorithm, Quasi-bivariate Variational Mode Decomposition (QB-VMD). Both components are found to be dominated by streak-like structures, which can be regarded as the wall signature of the inner-layer streaks and the outer-layer LSMs, respectively. Extreme positive/negative wall-shear stress fluctuation events are detected in the large-scale component. The former’s occurrence frequency is nearly one order of magnitude higher than the latter; therefore, they contribute a significant portion of the long tail of the wall-shear stress distribution. Both two-point correlations and conditional averages show that these extreme positive wall-shear stress events are embedded in the large-scale positive u‧ τ streaks. They seem to be formed by near-wall ‘splatting’ process, which are related to strong finger-like sweeping (Q4) events originated from the outer-layer positive LSMs.

Free-edge effects in laminates under extension, bending and twisting. II - Sublaminate/layer modeling and analysis

NASA Technical Reports Server (NTRS)

Yin, Wan-Lee

1992-01-01

The stress-function-based variational method of Yin (1991) is extended and modified into a combined layer/sublaminate approach applicable to a laminated strip composed of a large number of differently orientated, anisotropic elastic plies. Lekhnitskii's (1963) stress functions are introduced into two interior layers adjacent to a particular interface. The remaining layers are grouped into an upper sublaminate and a lower sublaminate. The stress functions are expanded in truncated power series of the thickness coordinate, and the differential equations governing the coefficient functions are derived by using the complementary virtual work principle. The layer/sublaminate approach limits the dimension of the eigenvalue problem to a fixed number irrespective of the number of layers in the sublaminate, so that reasonably accurate solutions of the interlaminar stresses can be computed with extreme ease. For symmetric, four-layer, angle-ply and cross-ply laminates, a comparison of the previous analysis results based on the pure layer model and new results based on two different layer/sublaminate models indicates reasonable over-all agreement in the interlaminar stresses and superior agreement in the total peeling and shearing force.

Viscosity of thickened fluids that relate to the Australian National Standards.

PubMed

Karsten Hadde, Enrico; Ann Yvette Cichero, Julie; Michael Nicholson, Timothy

2016-08-01

In 2007, Australia published standardized terminology and definitions for three levels of thickened fluids used in the management of dysphagia. This study examined the thickness of the current Australian National Fluid Standards rheologically (i.e. viscosity, yield stress) and correlated these results with the "fork test", as described in the national standards. Clinicians who prescribe or work with thickened liquids and laypersons were recruited to categorize 15 different thickened fluids of known viscosities using the fork test. The mean apparent viscosity and the yield stress for each fluid category were calculated. Clear responses were obtained by both clinicians and laypersons for very thin fluids (< 90 mPa.s) and very thick fluids (> 1150 mPa.s), but large variations of responses were seen for intermediate viscosities. Measures of viscosity and yield stress were important in allocating liquids to different categories. Three bands of fluid viscosity with distinct intermediate band gaps and associated yield stress measures were clearly identifiable and are proposed as objective complements to the Australian National Standards. The "fork test" provides rudimentary information about both viscosity and yield stress, but is an inexact measure of both variables.

Contribution of trans regulatory eQTL to cryptic genetic variation in C. elegans.

PubMed

Snoek, Basten L; Sterken, Mark G; Bevers, Roel P J; Volkers, Rita J M; Van't Hof, Arjen; Brenchley, Rachel; Riksen, Joost A G; Cossins, Andrew; Kammenga, Jan E

2017-06-29

Cryptic genetic variation (CGV) is the hidden genetic variation that can be unlocked by perturbing normal conditions. CGV can drive the emergence of novel complex phenotypes through changes in gene expression. Although our theoretical understanding of CGV has thoroughly increased over the past decade, insight into polymorphic gene expression regulation underlying CGV is scarce. Here we investigated the transcriptional architecture of CGV in response to rapid temperature changes in the nematode Caenorhabditis elegans. We analyzed regulatory variation in gene expression (and mapped eQTL) across the course of a heat stress and recovery response in a recombinant inbred population. We measured gene expression over three temperature treatments: i) control, ii) heat stress, and iii) recovery from heat stress. Compared to control, exposure to heat stress affected the transcription of 3305 genes, whereas 942 were affected in recovering animals. These affected genes were mainly involved in metabolism and reproduction. The gene expression pattern in recovering animals resembled both the control and the heat-stress treatment. We mapped eQTL using the genetic variation of the recombinant inbred population and detected 2626 genes with an eQTL in the heat-stress treatment, 1797 in the control, and 1880 in the recovery. The cis-eQTL were highly shared across treatments. A considerable fraction of the trans-eQTL (40-57%) mapped to 19 treatment specific trans-bands. In contrast to cis-eQTL, trans-eQTL were highly environment specific and thus cryptic. Approximately 67% of the trans-eQTL were only induced in a single treatment, with heat-stress showing the most unique trans-eQTL. These results illustrate the highly dynamic pattern of CGV across three different environmental conditions that can be evoked by a stress response over a relatively short time-span (2 h) and that CGV is mainly determined by response related trans regulatory eQTL.

Gear tooth stress measurements of two helicopter planetary stages

NASA Technical Reports Server (NTRS)

Krantz, Timothy L.

1992-01-01

Two versions of the planetary reduction stages from U.S. Army OH-58 helicopter main rotor transmissions were tested at NASA Lewis. One sequential and one nonsequential planetary were tested. Sun gear and ring gear teeth strains were measured, and stresses were calculated from the strains. The alternating stress at the fillet of both the loaded and unloaded sides of the teeth and at the root of the sun gear teeth are reported. Typical stress variations as the gear tooth moves through mesh are illustrated. At the tooth root location of the thin rimmed sun gear, a significant stress was produced by a phenomenon other than the passing of a planet gear. The load variation among the planets was studied. Each planet produced its own distinctive load distribution on the ring and sun gears. The load variation was less for a three planet, nonsequential design as compared to that of a four planet, sequential design. The reported results enhance the data base for gear stress levels and provide data for the validation of analytical methods.

Three-dimensional elastic-plastic finite-element analyses of constraint variations in cracked bodies

NASA Technical Reports Server (NTRS)

Newman, J. C., Jr.; Bigelow, C. A.; Shivakumar, K. N.

1993-01-01

Three-dimensional elastic-plastic (small-strain) finite-element analyses were used to study the stresses, deformations, and constraint variations around a straight-through crack in finite-thickness plates for an elastic-perfectly plastic material under monotonic and cyclic loading. Middle-crack tension specimens were analyzed for thicknesses ranging from 1.25 to 20 mm with various crack lengths. Three local constraint parameters, related to the normal, tangential, and hydrostatic stresses, showed similar variations along the crack front for a given thickness and applied stress level. Numerical analyses indicated that cyclic stress history and crack growth reduced the local constraint parameters in the interior of a plate, especially at high applied stress levels. A global constraint factor alpha(sub g) was defined to simulate three-dimensional effects in two-dimensional crack analyses. The global constraint factor was calculated as an average through-the-thickness value over the crack-front plastic region. Values of alpha(sub g) were found to be nearly independent of crack length and were related to the stress-intensity factor for a given thickness.

Stresses in curved nematic membranes.

PubMed

Santiago, J A

2018-05-01

Ordering configurations of a director field on a curved membrane induces stress. In this work, we present a theoretical framework to calculate the stress tensor and the torque as a consequence of the nematic ordering; we use the variational principle and invariance of the energy under Euclidean motions. Euler-Lagrange equations of the membrane as well as the corresponding boundary conditions also appear as natural results. The stress tensor found includes attraction-repulsion forces between defects; likewise, defects are attracted to patches with the same sign in Gaussian curvature. These forces are mediated by the Green function of the Laplace-Beltrami operator of the surface. In addition, we find nonisotropic forces that involve derivatives of the Green function and the Gaussian curvature, even in the normal direction to the membrane. We examine the case of axial membranes to analyze the spherical one. For spherical vesicles we find the modified Young-Laplace law as a consequence of the nematic texture. In the case of spherical cap with defect at the north pole, we find that the force is repulsive with respect to the north pole, indicating that it is an unstable equilibrium point.

Sex ratios in the two Germanies: a test of the economic stress hypothesis.

PubMed

Catalano, Ralph A

2003-09-01

Literature describing temporal variation in the secondary sex ratio among humans reports an association between population stressors and declines in the odds of male birth. Explanations of this phenomenon draw on reports that stressed females spontaneously abort male more than female fetuses, and that stressed males exhibit reduced sperm motility. This work has led to the argument that population stress induced by a declining economy reduces the human sex ratio. No direct test of this hypothesis appears in the literature. Here, a test is offered based on a comparison of the sex ratio in East and West Germany for the years 1946 to 1999. The theory suggests that the East German sex ratio should be lower in 1991, when East Germany's economy collapsed, than expected from its own history and from the sex ratio in West Germany. The hypothesis is tested using time-series modelling methods. The data support the hypothesis. The sex ratio in East Germany was at its lowest in 1991. This first direct test supports the hypothesis that economic decline reduces the human sex ratio.

Stresses in curved nematic membranes

NASA Astrophysics Data System (ADS)

Santiago, J. A.

2018-05-01

Ordering configurations of a director field on a curved membrane induces stress. In this work, we present a theoretical framework to calculate the stress tensor and the torque as a consequence of the nematic ordering; we use the variational principle and invariance of the energy under Euclidean motions. Euler-Lagrange equations of the membrane as well as the corresponding boundary conditions also appear as natural results. The stress tensor found includes attraction-repulsion forces between defects; likewise, defects are attracted to patches with the same sign in Gaussian curvature. These forces are mediated by the Green function of the Laplace-Beltrami operator of the surface. In addition, we find nonisotropic forces that involve derivatives of the Green function and the Gaussian curvature, even in the normal direction to the membrane. We examine the case of axial membranes to analyze the spherical one. For spherical vesicles we find the modified Young-Laplace law as a consequence of the nematic texture. In the case of spherical cap with defect at the north pole, we find that the force is repulsive with respect to the north pole, indicating that it is an unstable equilibrium point.

Turbulent stresses and secondary currents in a tidal-forced channel with significant curvature and asymmetric bed forms

USGS Publications Warehouse

Fong, D.A.; Monismith, Stephen G.; Stacey, M.T.; Burau, J.R.

2009-01-01

Acoustic Doppler current profilers are deployed to measure both the mean flow and turbulent properties in a channel with significant curvature. Direct measurements of the Reynolds stress show a significant asymmetry over the tidal cycle where stresses are enhanced during the flood tide and less prominent over the ebb tide. This asymmetry is corroborated by logarithmic fits using 10 min averaged velocity data. A smaller yet similar tendency asymmetry in drag coefficient is inferred by fitting the velocity and estimated large-scale pressure gradient to a one-dimensional along-channel momentum balance. This smaller asymmetry is consistent with recent modeling work simulating regional flows in the vicinity of the study site. The asymmetry in drag suggests the importance of previously reported bed forms for this channel and demonstrates spatial and temporarily variations in bed stress. Secondary circulation patterns observed in a relatively straight section of channel appear driven by local curvature rather than being remotely forced by the regions of significant curvature only a few hundred meters from the measurement site. ?? 2009 ASCE.

[Preliminary study on evaluation system of mental workers strain based on primary and middle school teachers].

PubMed

Lian, Yulong; Liu, Jiwen; Zhang, Chen; Yuan, Fang

2010-09-01

To use primary and middle schools teacher as samples to preliminarily build the mental work stress effect evaluation system, providing the methological platform for the research on the stress effect mechanism and mental workers interference measures. 851 teachers in primary and middle schools were selected with randomly stratified cluster methods. Use ISTA 6.0 and Life Events Evaluation Table to measure the stress factors, and use Work Tension Reaction Questionnaire, Symptom Self-Evaluation Table Questionnaire, and General Happiness Sensing Table to measure psychological stress reaction, blood sugar and blood fat, blood cortical, ACTH, nerve behavior function, for measuring physiological stress reaction. The Comprehensive Working Ability Index Table to measure working ability. And then use the mathematical model to build the mental workers stress effect evaluation system. And apply the simple random sampling method to select 400 environmental protection workers to perform cross effect validation. The model fits relatively well (RMSEA = 0.100, GFI = 0.93, NNFI = 1.00, CFI = 1.00) and conforms with the theory, reflecting the loads of the indice, such as, working stress reaction, psychological stress reaction, physiological stress reaction and working ability, are relatively high. At the same time, the stress reaction of those 4 dimensions can fit the 2-grade factor (stress effect) very well. The physiological stress reaction is negatively correlated (P < 0.05) with the working stress reaction, psychological stress reaction, working ability decrease, while is positively correlated (P < 0.05) with the working stress, psychological stress reaction, physiological stress reaction and working ability decrease. The social support is the protection factor for working stress, psychological stress reaction, physiological stress reaction and working ability decrease (gamma(s) are -0.55, -0.77, 0.73, -0.79, respectively, P < 0.05). While working stress factors, social life stress factors and dangerous individual characters are the risk factors (P < 0.05) for working stress, psychological stress reaction, physiological stress reaction increase and the working ability decrease. The utilization of the environment protection workers further validates this model. It conforms with the theory to evaluate the mental workers stress effects from the 4 dimensions, working stress, psychological stress reaction, physiological stress reaction, and working ability. And these 4 dimensions influence each other, and also are mutually different. The working and social life stress factors influence the stress effects with certain degrees. This evaluation model can tentatively be the methodological basis for the mental workers occupational stress evaluation.

Surface energy and surface stress on vicinals by revisiting the Shuttleworth relation

NASA Astrophysics Data System (ADS)

Hecquet, Pascal

2018-04-01

In 1998 [Surf. Sci. 412/413, 639 (1998)], we showed that the step stress on vicinals varies as 1/L, L being the distance between steps, while the inter-step interaction energy primarily follows the law as 1/L2 from the well-known Marchenko-Parshin model. In this paper, we give a better understanding of the interaction term of the step stress. The step stress is calculated with respect to the nominal surface stress. Consequently, we calculate the diagonal surface stresses in both the vicinal system (x, y, z) where z is normal to the vicinal and the projected system (x, b, c) where b is normal to the nominal terrace. Moreover, we calculate the surface stresses by using two methods: the first called the 'Zero' method, from the surface pressure forces and the second called the 'One' method, by homogeneously deforming the vicinal in the parallel direction, x or y, and by calculating the surface energy excess proportional to the deformation. By using the 'One' method on the vicinal Cu(0 1 M), we find that the step deformations, due to the applied deformation, vary as 1/L by the same factor for the tensor directions bb and cb, and by twice the same factor for the parallel direction yy. Due to the vanishing of the surface stress normal to the vicinal, the variation of the step stress in the direction yy is better described by using only the step deformation in the same direction. We revisit the Shuttleworth formula, for while the variation of the step stress in the direction xx is the same between the two methods, the variation in the direction yy is higher by 76% for the 'Zero' method with respect to the 'One' method. In addition to the step energy, we confirm that the variation of the step stress must be taken into account for the understanding of the equilibrium of vicinals when they are not deformed.

Design and analysis of a toroidal tester for the measurement of core losses under axial compressive stress

NASA Astrophysics Data System (ADS)

Alatawneh, Natheer; Rahman, Tanvir; Lowther, David A.; Chromik, Richard

2017-06-01

Electric machine cores are subjected to mechanical stresses due to manufacturing processes. These stresses include radial, circumferential and axial components that may have significant influences on the magnetic properties of the electrical steel and hence, on the output and efficiencies of electrical machines. Previously, most studies of iron losses due to mechanical stress have considered only radial and circumferential components. In this work, an improved toroidal tester has been designed and developed to measure the core losses and the magnetic properties of electrical steel under a compressive axial stress. The shape of the toroidal ring has been verified using 3D stress analysis. Also, 3D electromagnetic simulations show a uniform flux density distribution in the specimen with a variation of 0.03 T and a maximum average induction level of 1.5 T. The developed design has been prototyped, and measurements were carried out using a steel sample of grade 35WW300. Measurements show that applying small mechanical stresses normal to the sample thickness rises the delivered core losses, then the losses decrease continuously as the stress increases. However, the drop in core losses at high stresses does not go lower than the free-stress condition. Physical explanations for the observed trend of core losses as a function of stress are provided based on core loss separation to the hysteresis and eddy current loss components. The experimental results show that the effect of axial compressive stress on magnetic properties of electrical steel at high level of inductions becomes less pronounced.

Modeling and simulation of Charpy impact test of maraging steel 300 using Abaqus

NASA Astrophysics Data System (ADS)

Madhusudhan, D.; Chand, Suresh; Ganesh, S.; Saibhargavi, U.

2018-03-01

This work emphasizes the modeling and simulation of Charpy impact test to evaluate fracture energy at different pendulum velocities of armor maraging steel 300 using ABAQUS. To evaluate the fracture energy, V-notch specimen is fractured using the Johnson and Cook Damage model. The Charpy impact tests are of great importance related to fracture properties of steels. The objective of this work is to present absorbed energy variation at pendulum velocities of 5 m/sec, 6 m/sec, 7 m/sec and 9 m/sec in addition to stress distribution at v-notch. Finite Element Method of modeling for three dimensional specimens is used for simulation in commercial software of ABAQUS.

Shape and mechanics in thalattosuchian (Crocodylomorpha) skulls: implications for feeding behaviour and niche partitioning

PubMed Central

Pierce, S E; Angielczyk, K D; Rayfield, E J

2009-01-01

Variation in modern crocodilian and extinct thalattosuchian crocodylomorph skull morphology is only weakly correlated with phylogeny, implying that factors other than evolutionary proximity play important roles in determining crocodile skull shape. To further explore factors potentially influencing morphological differentiation within the Thalattosuchia, we examine teleosaurid and metriorhynchid skull shape variation within a mechanical and dietary context using a combination of finite element modelling and multivariate statistics. Patterns of stress distribution through the skull were found to be very similar in teleosaurid and metriorhynchid species, with stress peaking at the posterior constriction of the snout and around the enlarged supratemporal fenestrae. However, the magnitudes of stresses differ, with metriorhynchids having generally stronger skulls. As with modern crocodilians, a strong linear relationship between skull length and skull strength exists, with short-snouted morphotypes experiencing less stress through the skull than long-snouted morphotypes under equivalent loads. Selection on snout shape related to dietary preference was found to work in orthogonal directions in the two families: diet is associated with snout length in teleosaurids and with snout width in metriorhynchids, suggesting that teleosaurid skulls were adapted for speed of attack and metriorhynchid skulls for force production. Evidence also indicates that morphological and functional differentiation of the skull occurred as a result of dietary preference, allowing closely related sympatric species to exploit a limited environment. Comparisons of the mechanical performance of the thalattosuchian skull with extant crocodilians show that teleosaurids and long-snouted metriorhynchids exhibit stress magnitudes similar to or greater than those of long-snouted modern forms, whereas short-snouted metriorhynchids display stress magnitudes converging on those found in short-snouted modern species. As a result, teleosaurids and long-snouted metriorhynchids were probably restricted to lateral attacks of the head and neck, but short-snouted metriorhynchids may have been able to employ the grasp and shake and/or ‘death roll’ feeding and foraging behaviours. PMID:19702868

Cryptic Genetic Variation for Arabidopsis thaliana Seed Germination Speed in a Novel Salt Stress Environment

PubMed Central

Yuan, Wei; Flowers, Jonathan M.; Sahraie, Dustin J.; Purugganan, Michael D.

2016-01-01

The expansion of species ranges frequently necessitates responses to novel environments. In plants, the ability of seeds to disperse to marginal areas relies in part to its ability to germinate under stressful conditions. Here we examine the genetic architecture of Arabidopsis thaliana germination speed under a novel, saline environment, using an Extreme QTL (X-QTL) mapping platform we previously developed. We find that early germination in normal and salt conditions both rely on a QTL on the distal arm of chromosome 4, but we also find unique QTL on chromosomes 1, 2, 4, and 5 that are specific to salt stress environments. Moreover, different QTLs are responsible for early vs. late germination, suggesting a temporal component to the expression of life history under these stress conditions. Our results indicate that cryptic genetic variation exists for responses to a novel abiotic stress, which may suggest a role of such variation in adaptation to new climactic conditions or growth environments. PMID:27543295

Work stress prevention needs of employees and supervisors.

PubMed

Havermans, Bo M; Brouwers, Evelien P M; Hoek, Rianne J A; Anema, Johannes R; van der Beek, Allard J; Boot, Cécile R L

2018-05-21

Work stress prevention can reduce health risks for individuals, as well as organisational and societal costs. The success of work stress interventions depends on proper implementation. Failure to take into account the needs of employees and supervisors can hinder intervention implementation. This study aimed to explore employee and supervisor needs regarding organisational work stress prevention. Semi-structured telephone interviews were conducted with employees (n = 7) and supervisors (n = 8) from different sectors, such as the finance, health care, and services industry. The interviews focused on respondents' needs regarding the prevention of work stress within an organisational setting. Performing thematic analysis, topics and themes were extracted from the verbatim transcribed interviews using Atlas.ti. Both employees and supervisors reported a need for: 1) communication about work stress, 2) attention for determinants of work stress, 3) supportive circumstances (prerequisites) for work stress prevention, 4) involvement of various stakeholders in work stress prevention, and 5) availability of work stress prevention measures. Both employees and supervisors expressed the need for supervisors to communicate about work stress. Employees and supervisors reported similar psychosocial work factors that should be targeted for prevention (e.g., social support and autonomy). There was greater variety in the sub-themes within communication about work stress and supportive circumstances for work stress prevention in supervisor responses, and greater variety in the sub-themes within availability of work stress prevention measures in employee responses. Both employees and supervisors were explicit about who should take part in communication about work stress, what prerequisites for work stress prevention should exist, and which stakeholders should be involved. These results can inform work stress prevention practice, supporting selection and implementation of interventions. This study was registered in the Netherlands National Trial Register, trial code: NTR5527 .

Investigation of non-linear contact for a clearance-fit bolt in a graphite/epoxy laminate

NASA Technical Reports Server (NTRS)

Prabhakaran, R.; Naik, R. A.

1986-01-01

Numerous analytical studies have been published for the nonlinear load-contact variations in clearance-fit bolted joints. In these studies, stress distributions have been obtained and failure predictions have been made. However, very little experimental work has been reported regarding the contact or the stresses. This paper describes a fiber-optic technique for measuring the angle of contact in a clearance-fit bolt-loaded hole. Measurements of the contact angle have been made in a quasi-isotropic graphite-epoxy laminate by the optical as well as an electrical technique, and the results have been compared with those obtained from a finite-element analysis. The results from the two experimental techniques show excellent agreement; the finite-element results show some discrepancy, probably due to the interfacial frictions.

To reduce the maximum stress and the stress shielding effect around a dental implant-bone interface using radial functionally graded biomaterials.

PubMed

Asgharzadeh Shirazi, H; Ayatollahi, M R; Asnafi, A

2017-05-01

In a dental implant system, the value of stress and its distribution plays a pivotal role on the strength, durability and life of the implant-bone system. A typical implant consists of a Titanium core and a thin layer of biocompatible material such as the hydroxyapatite. This coating has a wide range of clinical applications in orthopedics and dentistry due to its biocompatibility and bioactivity characteristics. Low bonding strength and sudden variation of mechanical properties between the coating and the metallic layers are the main disadvantages of such common implants. To overcome these problems, a radial distributed functionally graded biomaterial (FGBM) was proposed in this paper and the effect of material property on the stress distribution around the dental implant-bone interface was studied. A three-dimensional finite element simulation was used to illustrate how the use of radial FGBM dental implant can reduce the maximum von Mises stress and, also the stress shielding effect in both the cortical and cancellous bones. The results, of course, give anybody an idea about optimized behaviors that can be achieved using such materials. The finite element solver was validated by familiar methods and the results were compared to previous works in the literature.

Estimation of stress distribution in ferromagnetic tensile specimens using low cost eddy current stress measurement system and BP neural network.

PubMed

Li, Jianwei; Zhang, Weimin; Zeng, Weiqin; Chen, Guolong; Qiu, Zhongchao; Cao, Xinyuan; Gao, Xuanyi

2017-01-01

Estimation of the stress distribution in ferromagnetic components is very important for evaluating the working status of mechanical equipment and implementing preventive maintenance. Eddy current testing technology is a promising method in this field because of its advantages of safety, no need of coupling agent, etc. In order to reduce the cost of eddy current stress measurement system, and obtain the stress distribution in ferromagnetic materials without scanning, a low cost eddy current stress measurement system based on Archimedes spiral planar coil was established, and a method based on BP neural network to obtain the stress distribution using the stress of several discrete test points was proposed. To verify the performance of the developed test system and the validity of the proposed method, experiment was implemented using structural steel (Q235) specimens. Standard curves of sensors at each test point were achieved, the calibrated data were used to establish the BP neural network model for approximating the stress variation on the specimen surface, and the stress distribution curve of the specimen was obtained by interpolating with the established model. The results show that there is a good linear relationship between the change of signal modulus and the stress in most elastic range of the specimen, and the established system can detect the change in stress with a theoretical average sensitivity of -0.4228 mV/MPa. The obtained stress distribution curve is well consonant with the theoretical analysis result. At last, possible causes and improving methods of problems appeared in the results were discussed. This research has important significance for reducing the cost of eddy current stress measurement system, and advancing the engineering application of eddy current stress testing.

Estimation of stress distribution in ferromagnetic tensile specimens using low cost eddy current stress measurement system and BP neural network

PubMed Central

Li, Jianwei; Zeng, Weiqin; Chen, Guolong; Qiu, Zhongchao; Cao, Xinyuan; Gao, Xuanyi

2017-01-01

Estimation of the stress distribution in ferromagnetic components is very important for evaluating the working status of mechanical equipment and implementing preventive maintenance. Eddy current testing technology is a promising method in this field because of its advantages of safety, no need of coupling agent, etc. In order to reduce the cost of eddy current stress measurement system, and obtain the stress distribution in ferromagnetic materials without scanning, a low cost eddy current stress measurement system based on Archimedes spiral planar coil was established, and a method based on BP neural network to obtain the stress distribution using the stress of several discrete test points was proposed. To verify the performance of the developed test system and the validity of the proposed method, experiment was implemented using structural steel (Q235) specimens. Standard curves of sensors at each test point were achieved, the calibrated data were used to establish the BP neural network model for approximating the stress variation on the specimen surface, and the stress distribution curve of the specimen was obtained by interpolating with the established model. The results show that there is a good linear relationship between the change of signal modulus and the stress in most elastic range of the specimen, and the established system can detect the change in stress with a theoretical average sensitivity of -0.4228 mV/MPa. The obtained stress distribution curve is well consonant with the theoretical analysis result. At last, possible causes and improving methods of problems appeared in the results were discussed. This research has important significance for reducing the cost of eddy current stress measurement system, and advancing the engineering application of eddy current stress testing. PMID:29145500

Micromechanical processes of frictional aging and the affect of shear stress on fault healing: insights from material characterization and ultrasonic velocity measurements

NASA Astrophysics Data System (ADS)

Ryan, K. L.; Marone, C.

2015-12-01

During the seismic cycle, faults repeatedly fail and regain strength. The gradual strength recovery is often referred to as frictional healing, and existing works suggest that healing can play an important role in determining the mode of fault slip ranging from dynamic rupture to slow earthquakes. Laboratory studies can play an important role in identifying the processes of frictional healing and their evolution with shear strain during the seismic cycle. These studies also provide data for laboratory-derived friction constitutive laws, which can improve dynamic earthquake models. Previous work shows that frictional healing varies with shear stress on a fault during the interseismic period. Unfortunately, the micromechanical processes that cause shear stress dependent frictional healing are not well understood and cannot be incorporated into current earthquake models. In fault gouge, frictional healing involves compaction and particle rearrangement within sheared granular layers. Therefore, to address these issues, we investigate the role grain size reduction plays in frictional re-strengthening processes at different levels of shear stress. Sample material was preserved from biaxial deformation experiments on granular Westerly granite. The normal stress was held constant at 25 MPa and we performed several 100 second slide-hold-slide tests in each experiment. We conducted a series of 5 experiments each with a different value of normalized shear stress (ranging from 0 to 1), defined as the ratio of the pre-hold shear stress to the shear stress during the hold. The particle size distribution for each sample was analyzed. In addition, acoustic measurements were recorded throughout our experiments to investigate variations in ultrasonic velocity and signal amplitude that reflect changes in the elastic moduli of the layer. Acoustic monitoring provides information about healing mechanisms and can provide a link between laboratory studies and tectonic fault zones.

Stress analysis in curved composites due to thermal loading

NASA Astrophysics Data System (ADS)

Polk, Jared Cornelius

Many structures in aircraft, cars, trucks, ships, machines, tools, bridges, and buildings, consist of curved sections. These sections vary from straight line segments that have curvature at either one or both ends, segments with compound curvatures, segments with two mutually perpendicular curvatures or Gaussian curvatures, and segments with a simple curvature. With the advancements made in multi-purpose composites over the past 60 years, composites slowly but steadily have been appearing in these various vehicles, compound structures, and buildings. These composite sections provide added benefits over isotropic, polymeric, and ceramic materials by generally having a higher specific strength, higher specific stiffnesses, longer fatigue life, lower density, possibilities in reduction of life cycle and/or acquisition cost, and greater adaptability to intended function of structure via material composition and geometry. To be able to design and manufacture a safe composite laminate or structure, it is imperative that the stress distributions, their causes, and effects are thoroughly understood in order to successfully accomplish mission objectives and manufacture a safe and reliable composite. The objective of the thesis work is to expand upon the knowledge of simply curved composite structures by exploring and ascertaining all pertinent parameters, phenomenon, and trends in stress variations in curved laminates due to thermal loading. The simply curved composites consist of composites with one radius of curvature throughout the span of the specimen about only one axis. Analytical beam theory, classical lamination theory, and finite element analysis were used to ascertain stress variations in a flat, isotropic beam. An analytical method was developed to ascertain the stress variations in an isotropic, simply curved beam under thermal loading that is under both free-free and fixed-fixed constraint conditions. This is the first such solution to Author's best knowledge of such a problem. It was ascertained and proven that the general, non-modified (original) version of classical lamination theory cannot be used for an analytical solution for a simply curved beam or any other structure that would require rotations of laminates out their planes in space. Finite element analysis was used to ascertain stress variations in a simply curved beam. It was verified that these solutions reduce to the flat beam solutions as the radius of curvature of the beams tends to infinity. MATLAB was used to conduct the classical lamination theory numerical analysis. A MATLAB program was written to conduct the finite element analysis for the flat and curved beams, isotropic and composite. It does not require incompatibility techniques used in mechanics of isotropic materials for indeterminate structures that are equivalent to fixed-beam problems. Finally, it has the ability to enable the user to define and create unique elements not accessible in commercial software, and modify finite element procedures to take advantage of new paradigms.

Individual stress vulnerability is predicted by short-term memory and AMPA receptor subunit ratio in the hippocampus.

PubMed

Schmidt, Mathias V; Trümbach, Dietrich; Weber, Peter; Wagner, Klaus; Scharf, Sebastian H; Liebl, Claudia; Datson, Nicole; Namendorf, Christian; Gerlach, Tamara; Kühne, Claudia; Uhr, Manfred; Deussing, Jan M; Wurst, Wolfgang; Binder, Elisabeth B; Holsboer, Florian; Müller, Marianne B

2010-12-15

Increased vulnerability to aversive experiences is one of the main risk factors for stress-related psychiatric disorders as major depression. However, the molecular bases of vulnerability, on the one hand, and stress resilience, on the other hand, are still not understood. Increasing clinical and preclinical evidence suggests a central involvement of the glutamatergic system in the pathogenesis of major depression. Using a mouse paradigm, modeling increased stress vulnerability and depression-like symptoms in a genetically diverse outbred strain, and we tested the hypothesis that differences in AMPA receptor function may be linked to individual variations in stress vulnerability. Vulnerable and resilient animals differed significantly in their dorsal hippocampal AMPA receptor expression and AMPA receptor binding. Treatment with an AMPA receptor potentiator during the stress exposure prevented the lasting effects of chronic social stress exposure on physiological, neuroendocrine, and behavioral parameters. In addition, spatial short-term memory, an AMPA receptor-dependent behavior, was found to be predictive of individual stress vulnerability and response to AMPA potentiator treatment. Finally, we provide evidence that genetic variations in the AMPA receptor subunit GluR1 are linked to the vulnerable phenotype. Therefore, we propose genetic variations in the AMPA receptor system to shape individual stress vulnerability. Those individual differences can be predicted by the assessment of short-term memory, thereby opening up the possibility for a specific treatment by enhancing AMPA receptor function.

Measuring Stress Before and During Pregnancy: A Review of Population-Based Studies of Obstetric Outcomes

PubMed Central

Witt, Whitney; Litzelman, Kristin; Cheng, Erika R; Wakeel, Fathima; Barker, Emily S.

2013-01-01

Objectives Mounting evidence from clinic and convenience samples suggests that stress is an important predictor of adverse obstetric outcomes. Using a proposed theoretical framework, this review identified and synthesized the population-based literature on the measurement of stress prior to and during pregnancy in relation to obstetric outcomes. Methods Population-based, peer-reviewed empirical articles that examined stress prior to or during pregnancy in relation to obstetric outcomes were identified in the PubMed and PsycInfo databases. Articles were evaluated to determine the domain(s) of stress (environmental, psychological, and/or biological), period(s) of stress (preconception and/or pregnancy), and strength of the association between stress and obstetric outcomes. Results Thirteen studies were evaluated. The identified studies were all conducted in developed countries. The majority of studies examined stress only during pregnancy (n=10); three examined stress during both the preconception and pregnancy periods (n=3). Most studies examined the environmental domain (e.g., life events) only (n=9), two studies examined the psychological domain only, and two studies examined both. No study incorporated a biological measure of stress. Environmental stressors before and during pregnancy were associated with worse obstetric outcomes, although some conflicting findings exist. Conclusions Few population-based studies have examined stress before or during pregnancy in relation to obstetric outcomes. Although considerable variation exists in the measurement of stress across studies, environmental stress increased the risk for poor obstetric outcomes. Additional work using a lifecourse approach is needed to fill the existing gaps in the literature and to develop a more comprehensive understanding of the mechanisms by which stress impacts obstetric outcomes. PMID:23447085

Local residual stress monitoring of aluminum nitride MEMS using UV micro-Raman spectroscopy

DOE PAGES

Choi, Sukwon; Griffin, Benjamin A.

2016-01-06

Localized stress variation in aluminum nitride (AlN) sputtered on patterned metallization has been monitored through the use of UV micro-Raman spectroscopy. This technique utilizing 325 nm laser excitation allows detection of the AlN E2(high) phonon mode in the presence of metal electrodes beneath the AlN layer with a high spatial resolution of less than 400 nm. The AlN film stress shifted 400 MPa from regions where AlN was deposited over a bottom metal electrode versus silicon dioxide. Thus, across wafer stress variations were also investigated showing that wafer level stress metrology, for example using wafer curvature measurements, introduces large uncertaintiesmore » for predicting the impact of AlN residual stress on the device performance.« less

Contribution of job strain, job status and marital status to laboratory and ambulatory blood pressure in patients with mild hypertension.

PubMed

Blumenthal, J A; Thyrum, E T; Siegel, W C

1995-02-01

The effects of job strain, occupational status, and marital status on blood pressure were evaluated in 99 men and women with mild hypertension. Blood pressure was measured during daily life at home and at work over 15 h of ambulatory blood pressure monitoring. On a separate day, blood pressure was measured in the laboratory during mental stress testing. As expected, during daily life, blood pressure was higher at work than at home. High job strain was associated with elevated systolic blood pressure among women, but not men. However, both men and women with high status occupations had significantly higher blood pressures during daily life and during laboratory mental stress testing. This was especially true for men, in that men with high job status had higher systolic blood pressures than low job status men. Marital status also was an important moderating variable, particularly for women, with married women having higher ambulatory blood pressures than single women. During mental stress testing, married persons had higher systolic blood pressures than unmarried individuals. These data suggest that occupational status and marital status may contribute even more than job strain to variations in blood pressure during daily life and laboratory testing.

Job demands and job strain as risk factors for employee wellbeing in elderly care: an instrumental-variables analysis.

PubMed

Elovainio, Marko; Heponiemi, Tarja; Kuusio, Hannamaria; Jokela, Markus; Aalto, Anna-Mari; Pekkarinen, Laura; Noro, Anja; Finne-Soveri, Harriet; Kivimäki, Mika; Sinervo, Timo

2015-02-01

The association between psychosocial work environment and employee wellbeing has repeatedly been shown. However, as environmental evaluations have typically been self-reported, the observed associations may be attributable to reporting bias. Applying instrumental-variable regression, we used staffing level (the ratio of staff to residents) as an unconfounded instrument for self-reported job demands and job strain to predict various indicators of wellbeing (perceived stress, psychological distress and sleeping problems) among 1525 registered nurses, practical nurses and nursing assistants working in elderly care wards. In ordinary regression, higher self-reported job demands and job strain were associated with increased risk of perceived stress, psychological distress and sleeping problems. The effect estimates for the associations of these psychosocial factors with perceived stress and psychological distress were greater, but less precisely estimated, in an instrumental-variables analysis which took into account only the variation in self-reported job demands and job strain that was explained by staffing level. No association between psychosocial factors and sleeping problems was observed with the instrumental-variable analysis. These results support a causal interpretation of high self-reported job demands and job strain being risk factors for employee wellbeing. © The Author 2014. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Gender/Sex Differences in the Relationship between Psychosocial Work Exposures and Work and Life Stress.

PubMed

Padkapayeva, Kathy; Gilbert-Ouimet, Mahée; Bielecky, Amber; Ibrahim, Selahadin; Mustard, Cameron; Brisson, Chantal; Smith, Peter

2018-04-18

Stress is an important factor affecting the health of working population. While work exposures are determinants of levels of work and life stress, we do not know whether similar or different exposures are related to stress levels for men and women. This study aimed to formally examine male/female differences in the relationships between psychosocial work exposures and work and life stress in a representative sample of Canadian labour market participants. We used data from 2012 cycle of the Canadian Community Health Survey (CCHS), a representative population-based survey conducted by Statistics Canada. The sample was restricted to employed labour force participants working 15+ hours per week (N = 8328, 48% female). To examine the relationship between work exposures and work and life stress, we conducted path analyses. Psychosocial work exposures included social support, job insecurity, job control, and job strain. Differences between estimates for men and women were explored using multigroup analyses, constraining paths between male and female models to be equivalent and examining the impact on change in model fit. Male/female differences were observed in the relationships between supervisor support and work stress levels as well as between job control, job insecurity, job strain, and life stress levels. Higher levels of supervisor support at work were associated with lower work stress among women, but not among men. Low job control had a direct protective effect on life stress for men but not for women, while high job strain had a direct adverse effect on life stress among women but not among men. Higher job insecurity was more strongly associated with higher life stress among men compared with women. The relationship between work stress and life stress was similar among men and women. The findings of this study suggest that the relationships between psychosocial exposures and work and life stress differ for men and women. Our study also raised important questions about which work exposures are considered when assessing work stress, with level of job control not related to work stress but associated with levels of life stress among men. Our study highlights the role of psychosocial work environment for both work and life stress and suggests differences in the importance of specific psychosocial work dimensions for feelings of stress among men and women, and for work stress versus life stress. Future study designs should ensure that measures are included to better disentangle the relative contribution of social and biological factors in explaining these differences among men and women.

Seasonal variations in shallow Alaska seismicity and stress modulation from GRACE derived hydrological loading

NASA Astrophysics Data System (ADS)

Johnson, C. W.; Fu, Y.; Burgmann, R.

2017-12-01

Shallow (≤50 km), low magnitude (M≥2.0) seismicity in southern Alaska is examined for seasonal variations during the annual hydrological cycle. The seismicity is declustered with a spatio-temporal epidemic type aftershock sequence (ETAS) model. The removal of aftershock sequences allows detailed investigation of seismicity rate changes, as water and ice loads modulate crustal stresses throughout the year. The GRACE surface loads are obtained from the JPL mass concentration blocks (mascons) global land and ocean solutions. The data product is smoothed with a 9˚ Gaussian filter and interpolated on a 25 km grid. To inform the surface loading model, the global solutions are limited to the region from -160˚ to -120˚ and 50˚ to 70˚. The stress changes are calculated using a 1D spherical layered earth model at depth intervals of 10 km from 10 - 50 km in the study region. To evaluate the induced seasonal stresses, we use >30 years of earthquake focal mechanisms to constrain the background stress field orientation and assess the stress change with respect to the principal stress orientation. The background stress field is assumed to control the preferred orientation of faulting, and stress field perturbations are expected to increase or decrease seismicity. The number of excess earthquakes is calculated with respect to the background seismicity rates. Here, we present preliminary results for the shallow seismicity variations and quantify the seasonal stresses associated with changes in hydrological loading.

Variation of the distribution of crack lengths during corrosion fatigue

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishihara, S.; Miyao, K.; Shiozawa, K.

1984-07-01

The detailed initiation and growth behaviour of distributed cracks on a specimen surface was investigated during corrosion fatigue. It can be clarified that the changes of the distribution of crack lengths with stress cycling reflect the behaviour of initiation and growth of distributed cracks. The distribution of crack lengths for certain stress cycles could be explained by a statistical calculation which takes into account both the variation of number of cracks during stress cycling and the scatter of crack growth rate.

Periodic and chaotic psychological stress variations as predicted by a social support buffered response model

NASA Astrophysics Data System (ADS)

Field, Richard J.; Gallas, Jason A. C.; Schuldberg, David

2017-08-01

Recent work has introduced social dynamic models of people's stress-related processes, some including amelioration of stress symptoms by support from others. The effects of support may be ;direct;, depending only on the level of support, or ;buffering;, depending on the product of the level of support and level of stress. We focus here on the nonlinear buffering term and use a model involving three variables (and 12 control parameters), including stress as perceived by the individual, physical and psychological symptoms, and currently active social support. This model is quantified by a set of three nonlinear differential equations governing its stationary-state stability, temporal evolution (sometimes oscillatory), and how each variable affects the others. Chaos may appear with periodic forcing of an environmental stress parameter. Here we explore this model carefully as the strength and amplitude of this forcing, and an important psychological parameter relating to self-kindling in the stress response, are varied. Three significant observations are made: 1. There exist many complex but orderly regions of periodicity and chaos, 2. there are nested regions of increasing number of peaks per cycle that may cascade to chaos, and 3. there are areas where more than one state, e.g., a period-2 oscillation and chaos, coexist for the same parameters; which one is reached depends on initial conditions.

Age-related Decline of Abiotic Stress Tolerance in Young Drosophila melanogaster Adults.

PubMed

Colinet, Hervé; Chertemps, Thomas; Boulogne, Isabelle; Siaussat, David

2016-12-01

Stress tolerance generally declines with age as a result of functional senescence. Age-dependent alteration of stress tolerance can also occur in early adult life. In Drosophila melanogaster, evidence of such a decline in young adults has only been reported for thermotolerance. It is not known whether early adult life entails a general stress tolerance reduction and whether the response is peculiar to thermal traits. The present work was designed to investigate whether newly eclosed D melanogaster adults present a high tolerance to a range of biotic and abiotic insults. We found that tolerance to most of the abiotic stressors tested (desiccation, paraquat, hydrogen peroxide, deltamethrin, and malathion) was high in newly eclosed adults before dramatically declining over the next days of adult life. No clear age-related pattern was found for resistance to biotic stress (septic or fungal infection) and starvation. These results suggest that newly eclosed adults present a culminating level of tolerance to extrinsic stress which is likely unrelated to immune process. We argue that stress tolerance variation at very young age is likely a residual attribute from the previous life stage (ontogenetic carryover) or a feature related to the posteclosion development. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Nanoscale Probing of Thermal, Stress, and Optical Fields under Near-Field Laser Heating

PubMed Central

Tang, Xiaoduan; Xu, Shen; Wang, Xinwei

2013-01-01

Micro/nanoparticle induced near-field laser ultra-focusing and heating has been widely used in laser-assisted nanopatterning and nanolithography to pattern nanoscale features on a large-area substrate. Knowledge of the temperature and stress in the nanoscale near-field heating region is critical for process control and optimization. At present, probing of the nanoscale temperature, stress, and optical fields remains a great challenge since the heating area is very small (∼100 nm or less) and not immediately accessible for sensing. In this work, we report the first experimental study on nanoscale mapping of particle-induced thermal, stress, and optical fields by using a single laser for both near-field excitation and Raman probing. The mapping results based on Raman intensity variation, wavenumber shift, and linewidth broadening all give consistent conjugated thermal, stress, and near-field focusing effects at a 20 nm resolution (<λ/26, λ = 32 nm). Nanoscale mapping of near-field effects of particles from 1210 down to 160 nm demonstrates the strong capacity of such a technique. By developing a new strategy for physical analysis, we have de-conjugated the effects of temperature, stress, and near-field focusing from the Raman mapping. The temperature rise and stress in the nanoscale heating region is evaluated at different energy levels. High-fidelity electromagnetic and temperature field simulation is conducted to accurately interpret the experimental results. PMID:23555566

Strain-dependent activation energy of shear transformation in metallic glasses

NASA Astrophysics Data System (ADS)

Xu, Bin; Falk, Michael; Li, Jinfu; Kong, Lingti

2017-04-01

Shear transformation (ST) plays a decisive role in determining the mechanical behavior of metallic glasses, which is believed to be a stress-assisted thermally activated process. Understanding the dependence in its activation energy on the stress imposed on the material is of central importance to model the deformation process of metallic glasses and other amorphous solids. Here a theoretical model is proposed to predict the variation of the minimum energy path (MEP) associated with a particular ST event upon further deformation. Verification based on atomistic simulations and calculations are also conducted. The proposed model reproduces the MEP and activation energy of an ST event under different imposed macroscopic strains based on a known MEP at a reference strain. Moreover, an analytical approach is proposed based on the atomistic calculations, which works well when the stress varies linearity along the MEP. These findings provide necessary background for understanding the activation processes and, in turn, the mechanical behavior of metallic glasses.

Laterality strength is linked to stress reactivity in Port Jackson sharks (Heterodontus portusjacksoni).

PubMed

Byrnes, Evan E; Vila Pouca, Catarina; Brown, Culum

2016-05-15

Cerebral lateralization is an evolutionarily deep-rooted trait, ubiquitous among the vertebrates and present even in some invertebrates. Despite the advantages of cerebral lateralization in enhancing cognition and facilitating greater social cohesion, large within population laterality variation exists in many animal species. It is proposed that this variation is maintained due links with inter-individual personality trait differences. Here we explored for lateralization in Port Jackson sharks (Heterodontus portusjacksoni) using T-maze turn and rotational swimming tasks. Additionally, we explored for a link between personality traits, boldness and stress reactivity, and cerebral lateralization. Sharks demonstrated large individual and sex biased laterality variation, with females demonstrating greater lateralization than males overall. Stress reactivity, but not boldness, was found to significantly correlate with lateralization strength. Stronger lateralized individuals were more reactive to stress. Demonstrating laterality in elasmobranchs for the first time indicates ancient evolutionary roots of vertebrate lateralization approximately 240 million years old. Greater lateralization in female elasmobranchs may be related enhancing females' ability to process multiple stimuli during mating, which could increase survivability and facilitate insemination. Despite contrasting evidence in teleost fishes, the results of this study suggest that stress reactivity, and other personality traits, may be linked to variation in lateralization. Copyright © 2016 Elsevier B.V. All rights reserved.

An experimental analysis of the heritability of variation in glucocorticoid concentrations in a wild avian population

PubMed Central

Jenkins, Brittany R.; Vitousek, Maren N.; Hubbard, Joanna K.; Safran, Rebecca J.

2014-01-01

Glucocorticoid hormones (CORT) are predicted to promote adaptation to variable environments, yet little is known about the potential for CORT secretion patterns to respond to selection in free-living populations. We assessed the heritable variation underlying differences in hormonal phenotypes using a cross-foster experimental design with nestling North American barn swallows (Hirundo rustica erythrogaster). Using a bivariate animal model, we partitioned variance in baseline and stress-induced CORT concentrations into their additive genetic and rearing environment components and estimated their genetic correlation. Both baseline and stress-induced CORT were heritable with heritability of 0.152 and 0.343, respectively. We found that the variation in baseline CORT was best explained by rearing environment, whereas the variation in stress-induced CORT was contributed to by a combination of genetic and environmental factors. Further, we did not detect a genetic correlation between these two hormonal traits. Although rearing environment appears to play an important role in the secretion of both types of CORT, our results suggest that stress-induced CORT levels are underlain by greater additive genetic variance compared with baseline CORT levels. Accordingly, we infer that the glucocorticoid response to stress has a greater potential for evolutionary change in response to selection compared with baseline glucocorticoid secretion patterns. PMID:25056627

Snail phenotypic variation and stress proteins: do different heat response strategies contribute to Waddington's widget in field populations?

PubMed

Köhler, Heinz-R; Lazzara, Raimondo; Dittbrenner, Nils; Capowiez, Yvan; Mazzia, Christophe; Triebskorn, Rita

2009-03-15

On the basis of studies with laboratory strains of Drosophila and Arabidopsis, it has been hypothesized that potential buffers to the expression of phenotypic morphological variation, such as Hsp90 and possibly Hsp70, represent important components of Waddington's widget, which may confer capacitive evolution. As studies on field populations of living organisms to test this hypothesis are lacking, we tested whether a heat response strategy involving high stress protein levels is associated with low morphological variation and vice versa, using four natural populations of Mediterranean pulmonate snails. In response to 8 hr of elevated temperatures, a population of Xeropicta derbentina with uniform shell pigmentation pattern showed remarkably high Hsp70 but low Hsp90 levels. In contrast, a highly variable population of Cernuella virgata kept both Hsp90 and Hsp70 levels low when held at diverse though environmentally relevant temperatures. Two other populations (Theba pisana and another X. derbentina population) with intermediate variation in shell pigmentation pattern were also intermediate in inducing Hsp70, though Hsp90 was maintained at a low level. The observed correlation of stress protein levels and coloration pattern variation provide the first indirect evidence for an association of stress proteins with Waddington's widget under natural conditions.

Human Service Employees Coping with Job Stress, Family Stress and Work-Family Conflict.

ERIC Educational Resources Information Center

Carbone, Dominic J.

The intersection of work and family life has always been a popular topic of discussion among family theorists. This study examined human service employees in direct service positions coping with work stress, family stress, and work-family conflict. The effects of work stress, family stress and work-family conflict on depression were examined.…

Thinner regions of intracranial aneurysm wall correlate with regions of higher wall shear stress: a 7.0 tesla MRI

PubMed Central

Blankena, Roos; Kleinloog, Rachel; Verweij, Bon H.; van Ooij, Pim; ten Haken, Bennie; Luijten, Peter R.; Rinkel, Gabriel J.E.; Zwanenburg, Jaco J.M.

2016-01-01

Purpose To develop a method for semi-quantitative wall thickness assessment on in vivo 7.0 tesla (7T) MRI images of intracranial aneurysms for studying the relation between apparent aneurysm wall thickness and wall shear stress. Materials and Methods Wall thickness was analyzed in 11 unruptured aneurysms in 9 patients, who underwent 7T MRI with a TSE based vessel wall sequence (0.8 mm isotropic resolution). A custom analysis program determined the in vivo aneurysm wall intensities, which were normalized to signal of nearby brain tissue and were used as measure for apparent wall thickness (AWT). Spatial wall thickness variation was determined as the interquartile range in AWT (the middle 50% of the AWT range). Wall shear stress was determined using phase contrast MRI (0.5 mm isotropic resolution). We performed visual and statistical comparisons (Pearson’s correlation) to study the relation between wall thickness and wall shear stress. Results 3D colored AWT maps of the aneurysms showed spatial AWT variation, which ranged from 0.07 to 0.53, with a mean variation of 0.22 (a variation of 1.0 roughly means a wall thickness variation of one voxel (0.8mm)). In all aneurysms, AWT was inversely related to WSS (mean correlation coefficient −0.35, P<0.05). Conclusions A method was developed to measure the wall thickness semi-quantitatively, using 7T MRI. An inverse correlation between wall shear stress and AWT was determined. In future studies, this non-invasive method can be used to assess spatial wall thickness variation in relation to pathophysiologic processes such as aneurysm growth and –rupture. PMID:26892986

Monitoring transient changes within overpressured regions of subduction zones using ambient seismic noise.

PubMed

Chaves, Esteban J; Schwartz, Susan Y

2016-01-01

In subduction zones, elevated pore fluid pressure, generally linked to metamorphic dehydration reactions, has a profound influence on the mechanical behavior of the plate interface and forearc crust through its control on effective stress. We use seismic noise-based monitoring to characterize seismic velocity variations following the 2012 Nicoya Peninsula, Costa Rica earthquake [M w (moment magnitude) 7.6] that we attribute to the presence of pressurized pore fluids. Our study reveals a strong velocity reduction (~0.6%) in a region where previous work identified high forearc pore fluid pressure. The depth of this velocity reduction is constrained to be below 5 km and therefore not the result of near-surface damage due to strong ground motions; rather, we posit that it is caused by fracturing of the fluid-pressurized weakened crust due to dynamic stresses. Although pressurized fluids have been implicated in causing coseismic velocity reductions beneath the Japanese volcanic arc, this is the first report of a similar phenomenon in a subduction zone setting. It demonstrates the potential to identify pressurized fluids in subduction zones using temporal variations of seismic velocity inferred from ambient seismic noise correlations.

Spatial and Temporal Stress Drop Variations of the 2011 Tohoku Earthquake Sequence

NASA Astrophysics Data System (ADS)

Miyake, H.

2013-12-01

The 2011 Tohoku earthquake sequence consists of foreshocks, mainshock, aftershocks, and repeating earthquakes. To quantify spatial and temporal stress drop variations is important for understanding M9-class megathrust earthquakes. Variability and spatial and temporal pattern of stress drop is a basic information for rupture dynamics as well as useful to source modeling. As pointed in the ground motion prediction equations by Campbell and Bozorgnia [2008, Earthquake Spectra], mainshock-aftershock pairs often provide significant decrease of stress drop. We here focus strong motion records before and after the Tohoku earthquake, and analyze source spectral ratios considering azimuth- and distance dependency [Miyake et al., 2001, GRL]. Due to the limitation of station locations on land, spatial and temporal stress drop variations are estimated by adjusting shifts from the omega-squared source spectral model. The adjustment is based on the stochastic Green's function simulations of source spectra considering azimuth- and distance dependency. We assumed the same Green's functions for event pairs for each station, both the propagation path and site amplification effects are cancelled out. Precise studies of spatial and temporal stress drop variations have been performed [e.g., Allmann and Shearer, 2007, JGR], this study targets the relations between stress drop vs. progression of slow slip prior to the Tohoku earthquake by Kato et al. [2012, Science] and plate structures. Acknowledgement: This study is partly supported by ERI Joint Research (2013-B-05). We used the JMA unified earthquake catalogue and K-NET, KiK-net, and F-net data provided by NIED.

Effects of the Variation in Brain Tissue Mechanical Properties on the Intracranial Response of a 6-Year-Old Child

PubMed Central

Cui, Shihai; Li, Haiyan; Li, Xiangnan; Ruan, Jesse

2015-01-01

Brain tissue mechanical properties are of importance to investigate child head injury using finite element (FE) method. However, these properties used in child head FE model normally vary in a large range in published literatures because of the insufficient child cadaver experiments. In this work, a head FE model with detailed anatomical structures is developed from the computed tomography (CT) data of a 6-year-old healthy child head. The effects of brain tissue mechanical properties on traumatic brain response are also analyzed by reconstruction of a head impact on engine hood according to Euro-NCAP testing regulation using FE method. The result showed that the variations of brain tissue mechanical parameters in linear viscoelastic constitutive model had different influences on the intracranial response. Furthermore, the opposite trend was obtained in the predicted shear stress and shear strain of brain tissues caused by the variations of mentioned parameters. PMID:26495031

A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous stress

NASA Astrophysics Data System (ADS)

Tchitchekova, Deyana S.; Morthomas, Julien; Ribeiro, Fabienne; Ducher, Roland; Perez, Michel

2014-07-01

A novel method for accurate and efficient evaluation of the change in energy barriers for carbon diffusion in ferrite under heterogeneous stress is introduced. This method, called Linear Combination of Stress States, is based on the knowledge of the effects of simple stresses (uniaxial or shear) on these diffusion barriers. Then, it is assumed that the change in energy barriers under a complex stress can be expressed as a linear combination of these already known simple stress effects. The modifications of energy barriers by either uniaxial traction/compression and shear stress are determined by means of atomistic simulations with the Climbing Image-Nudge Elastic Band method and are stored as a set of functions. The results of this method are compared to the predictions of anisotropic elasticity theory. It is shown that, linear anisotropic elasticity fails to predict the correct energy barrier variation with stress (especially with shear stress) whereas the proposed method provides correct energy barrier variation for stresses up to ˜3 GPa. This study provides a basis for the development of multiscale models of diffusion under non-uniform stress.

A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous stress.

PubMed

Tchitchekova, Deyana S; Morthomas, Julien; Ribeiro, Fabienne; Ducher, Roland; Perez, Michel

2014-07-21

A novel method for accurate and efficient evaluation of the change in energy barriers for carbon diffusion in ferrite under heterogeneous stress is introduced. This method, called Linear Combination of Stress States, is based on the knowledge of the effects of simple stresses (uniaxial or shear) on these diffusion barriers. Then, it is assumed that the change in energy barriers under a complex stress can be expressed as a linear combination of these already known simple stress effects. The modifications of energy barriers by either uniaxial traction/compression and shear stress are determined by means of atomistic simulations with the Climbing Image-Nudge Elastic Band method and are stored as a set of functions. The results of this method are compared to the predictions of anisotropic elasticity theory. It is shown that, linear anisotropic elasticity fails to predict the correct energy barrier variation with stress (especially with shear stress) whereas the proposed method provides correct energy barrier variation for stresses up to ∼3 GPa. This study provides a basis for the development of multiscale models of diffusion under non-uniform stress.

Genetic variation of the weaning weight of beef cattle as a function of accumulated heat stress.

PubMed

Santana, M L; Bignardi, A B; Eler, J P; Ferraz, J B S

2016-04-01

The objective of this study was to identify the genetic variation in the weaning weight (WW) of beef cattle as a function of heat stress. The WWs were recorded at approximately 205 days of age in three Brazilian beef cattle populations: Nelore (93,616), Brangus (18,906) and Tropical Composite (62,679). In view of the cumulative nature of WW, the effect of heat stress was considered as the accumulation of temperature and humidity index units (ACTHI) from the animal's birth to weaning. A reaction norm model was used to estimate the (co)variance components of WW across the ACTHI scale. The accumulation of THI units from birth to weaning negatively affected the WW. The definition of accumulated THI units as an environmental descriptor permitted to identify important genetic variation in the WW as a function of heat stress. As evidence of genotype by environment interaction, substantial heterogeneity was observed in the (co)variance components for WW across the environmental gradient. In this respect, the best animals in less stressful environments are not necessarily the best animals in more stressful environments. Furthermore, the response to selection for WW is expected to be lower in more stressful environments. © 2015 Blackwell Verlag GmbH.

Genetic Moderation of Stress Effects on Corticolimbic Circuitry.

PubMed

Bogdan, Ryan; Pagliaccio, David; Baranger, David Aa; Hariri, Ahmad R

2016-01-01

Stress exposure is associated with individual differences in corticolimbic structure and function that often mirror patterns observed in psychopathology. Gene x environment interaction research suggests that genetic variation moderates the impact of stress on risk for psychopathology. On the basis of these findings, imaging genetics, which attempts to link variability in DNA sequence and structure to neural phenotypes, has begun to incorporate measures of the environment. This research paradigm, known as imaging gene x environment interaction (iGxE), is beginning to contribute to our understanding of the neural mechanisms through which genetic variation and stress increase psychopathology risk. Although awaiting replication, evidence suggests that genetic variation within the canonical neuroendocrine stress hormone system, the hypothalamic-pituitary-adrenal axis, contributes to variability in stress-related corticolimbic structure and function, which, in turn, confers risk for psychopathology. For iGxE research to reach its full potential it will have to address many challenges, of which we discuss: (i) small effects, (ii) measuring the environment and neural phenotypes, (iii) the absence of detailed mechanisms, and (iv) incorporating development. By actively addressing these challenges, iGxE research is poised to help identify the neural mechanisms underlying genetic and environmental associations with psychopathology.

EARLY HEAD START FAMILIES' EXPERIENCES WITH STRESS: UNDERSTANDING VARIATIONS WITHIN A HIGH-RISK, LOW-INCOME SAMPLE.

PubMed

Hustedt, Jason T; Vu, Jennifer A; Bargreen, Kaitlin N; Hallam, Rena A; Han, Myae

2017-09-01

The federal Early Head Start program provides a relevant context to examine families' experiences with stress since participants qualify on the basis of poverty and risk. Building on previous research that has shown variations in demographic and economic risks even among qualifying families, we examined possible variations in families' perceptions of stress. Family, parent, and child data were collected to measure stressors and risk across a variety of domains in families' everyday lives, primarily from self-report measures, but also including assay results from child cortisol samples. A cluster analysis was employed to examine potential differences among groups of Early Head Start families. Results showed that there were three distinct subgroups of families, with some families perceiving that they experienced very high levels of stress while others perceived much lower levels of stress despite also experiencing poverty and heightened risk. These findings have important implications in that they provide an initial step toward distinguishing differences in low-income families' experiences with stress, thereby informing interventions focused on promoting responsive caregiving as a possible mechanism to buffer the effects of family and social stressors on young children. © 2017 Michigan Association for Infant Mental Health.

Political influences on greenhouse gas emissions from US states.

PubMed

Dietz, Thomas; Frank, Kenneth A; Whitley, Cameron T; Kelly, Jennifer; Kelly, Rachel

2015-07-07

Starting at least in the 1970s, empirical work suggested that demographic (population) and economic (affluence) forces are the key drivers of anthropogenic stress on the environment. We evaluate the extent to which politics attenuates the effects of economic and demographic factors on environmental outcomes by examining variation in CO2 emissions across US states and within states over time. We find that demographic and economic forces can in part be offset by politics supportive of the environment--increases in emissions over time are lower in states that elect legislators with strong environmental records.

Nutrigenetics and modulation of oxidative stress.

PubMed

Da Costa, Laura A; Badawi, Alaa; El-Sohemy, Ahmed

2012-01-01

Oxidative stress develops as a result of an imbalance between the production and accumulation of reactive species and the body's ability to manage them using exogenous and endogenous antioxidants. Exogenous antioxidants obtained from the diet, including vitamin C, vitamin E, and carotenoids, have important roles in preventing and reducing oxidative stress. Individual genetic variation affecting proteins involved in the uptake, utilization and metabolism of these antioxidants may alter their serum levels, exposure to target cells and subsequent contribution to the extent of oxidative stress. Endogenous antioxidants include the antioxidant enzymes superoxide dismutase, catalase, glutathione peroxidase, paraoxanase, and glutathione S-transferase. These enzymes metabolize reactive species and their by-products, reducing oxidative stress. Variation in the genes coding these enzymes may impact their enzymatic antioxidant activity and, thus, the levels of reactive species, oxidative stress, and risk of disease development. Oxidative stress may contribute to the development of chronic disease, including osteoporosis, type 2 diabetes, neurodegenerative diseases, cardiovascular disease, and cancer. Indeed, polymorphisms in most of the genes that code for antioxidant enzymes have been associated with several types of cancer, although inconsistent findings between studies have been reported. These inconsistencies may, in part, be explained by interactions with the environment, such as modification by diet. In this review, we highlight some of the recent studies in the field of nutrigenetics, which have examined interactions between diet, genetic variation in antioxidant enzymes, and oxidative stress. Copyright © 2012 S. Karger AG, Basel.

Lack of genetic variation in tree ring delta13C suggests a uniform, stomatally-driven response to drought stress across Pinus radiata genotypes.

PubMed

Rowell, Douglas M; Ades, Peter K; Tausz, Michael; Arndt, Stefan K; Adams, Mark A

2009-02-01

We assessed the variation in delta(13)C signatures of Pinus radiata D. Don stemwood taken from three genetic trials in southern Australia. We sought to determine the potential of using delta(13)C signatures as selection criteria for drought tolerance. Increment cores were taken from P. radiata and were used to determine the basal area increment and the delta(13)C signature of extracted cellulose. Both growth increment and cellulose delta(13)C were affected by water availability. Growth increment and delta(13)C were negatively correlated suggesting that growth was water-limited. While there was significant genetic variation in growth, there was no significant genetic variation in cellulose delta(13)C of tree rings. This suggests that different genotypes of P. radiata display significant differences in growth and yet respond similarly to drought stress. The delta(13)C response to drought stress was more due to changes in stomatal conductance than to the variation in photosynthetic capacity, and this may explain the lack of genetic variation in delta(13)C. The lack of genetic variation in cellulose delta(13)C of tree rings precludes its use as a selection criterion for drought tolerance among P. radiata genotypes.

PAC1 receptor antagonism in the bed nucleus of the stria terminalis (BNST) attenuates the endocrine and behavioral consequences of chronic stress

PubMed Central

Roman, Carolyn W.; Lezak, Kim R.; Hartsock, Matthew J.; Falls, William A.; Braas, Karen M.; Howard, Alan B.; Hammack, Sayamwong E.; May, Victor

2015-01-01

Summary Chronic or repeated stressor exposure can induce a number of maladaptive behavioral and physiological consequences and among limbic structures, the bed nucleus of the stria terminalis (BNST) has been implicated in the integration and interpretation of stress responses. Previous work has demonstrated that chronic variate stress (CVS) exposure in rodents increases BNST pituitary adenylate cyclase activating polypeptide (PACAP, Adcyap1) and PAC1 receptor (Adcyap1r1) transcript expression, and that acute BNST PACAP injections can stimulate anxiety-like behavior. Here we show that chronic stress increases PACAP expression selectively in the oval nucleus of the dorsolateral BNST in patterns distinct from those for corticotropin releasing hormone (CRH). Among receptor subtypes, BNST PACAP signaling through PAC1 receptors not only heightened anxiety responses as measured by different behavioral parameters but also induced anorexic-like behavior to mimic the consequences of stress. Conversely, chronic inhibition of BNST PACAP signaling by continuous infusion with the PAC1 receptor antagonist PACAP(6-38) during the week of CVS attenuated these stress-induced behavioral responses and changes in weight gain. BNST PACAP signaling stimulated the hypothalamic-pituitary-adrenal (HPA) axis and heightened corticosterone release; further, BNST PACAP(6-38) administration blocked corticosterone release in a sensitized stress model. In aggregate with recent associations of PACAP/PAC1 receptor dysregulation with altered stress responses including post-traumatic stress disorder, these data suggest that BNST PACAP/PAC1 receptor signaling mechanisms may coordinate the behavioral and endocrine consequences of stress. PMID:25001965

The variations in the nuclear proteome reveal new transcription factors and mechanisms involved in UV stress response in Pinus radiata.

PubMed

Pascual, Jesús; Alegre, Sara; Nagler, Matthias; Escandón, Mónica; Annacondia, María Luz; Weckwerth, Wolfram; Valledor, Luis; Cañal, María Jesús

2016-06-30

The importance of UV stress and its side-effects over the loss of plant productivity in forest species demands a deeper understanding of how pine trees respond to UV irradiation. Although the response to UV stress has been characterized at system and cellular levels, the dynamics within the nuclear proteome triggered by UV is still unknown despite that they are essential for gene expression and regulation of plant physiology. To fill this gap this work aims to characterize the variations in the nuclear proteome as a response to UV irradiation by using state-of-the-art mass spectrometry-based methods combined with novel bioinformatics workflows. The combination of SEQUEST, de novo sequencing, and novel annotation pipelines allowed cover sensing and transduction pathways, endoplasmic reticulum-related mechanisms and the regulation of chromatin dynamism and gene expression by histones, histone-like NF-Ys, and other transcription factors previously unrelated to this stress source, as well as the role of alternative splicing and other mechanisms involved in RNA translation and protein synthesis. The determination of 33 transcription factors, including NF-YB13, Pp005698_3 (NF-YB) and Pr009668_2 (WD-40), which are correlated to stress responsive mechanisms like an increased accumulation of photoprotective pigments and reduced photosynthesis, pointing them as strong candidate biomarkers for breeding programs aimed to improve UV resistance of pine trees. The description of the nuclear proteome of Pinus radiata combining a classic approach based on the use of SEQUEST and the use of a mass accuracy precursor alignment (MAPA) allowed an unprecedented protein coverage. This workflow provided the methodological basis for characterizing the changes in the nuclear proteome triggered by UV irradiation, allowing the depiction of the nuclear events involved in stress response and adaption. The relevance of some of the discovered proteins will suppose a major advance in stress biology field, also providing a set of transcription factors that can be considered as strong biomarker candidates to select trees more tolerant to UV radiation in forest upgrade programs. Copyright © 2016 Elsevier B.V. All rights reserved.

Search for Anisotropy Changes Associated with Two Large Earthquakes in Japan and New Zealand

NASA Astrophysics Data System (ADS)

Savage, M. K.; Graham, K.; Aoki, Y.; Arnold, R.

2017-12-01

Seismic anisotropy is often considered to be an indicator of stress in the crust, because the closure of cracks due to differential stress leads to waves polarized parallel to the cracks travelling faster than the orthogonal direction. Changes in shear wave splitting have been suggested to result from stress changes at volcanoes and earthquakes. However, the effects of mineral or structural alignment, and the difficulty of distinguishing between changes in anisotropy along an earthquake-station path from distinguishing changes in the path itself, have made such findings controversial. Two large earthquakes in 2016 provide unique datasets to test the use of shear wave splitting for measuring variations in stress because clusters of closely-spaced earthquakes occurred both before and after a mainshock. We use the automatic, objective splitting analysis code MFAST to speed process and minimize unwitting observer bias when determining time variations. The sequence of earthquakes related to the M=7.2 Japanese Kumamoto earthquake of 14 April 2016 includes both foreshocks, mainshocks and aftershocks. The sequence was recorded by the NIED permanent network, which already contributed background seismic anisotropy measurements in a previous study of anisotropy and stress in Kyushu. Preliminary measurements of shear wave splitting from earthquakes that occurred in 2016 show results at some stations that clearly differ from those of the earlier study. They also change between earthquakes recorded before and after the mainshock. Further work is under way to determine whether the changes are more likely due to changes in stress during the observation time, or due to spatial changes in anisotropy combined with changes in earthquake locations. Likewise, background seismicity and also foreshocks and aftershocks in the 2013 Cook Strait earthquake sequence including two M=6.5 earthquakes in 2013 in New Zealand were in the same general region as aftershocks of the M=7.8 Kaikoura earthquake that occurred on 14 November 2016. Here again, preliminary analysis suggests the possibility that we are observing changes in stress, but detailed analysis is needed to confirm that.

When you see it coming: Stressor anticipation modulates stress effects on negative affect.

PubMed

Neubauer, Andreas B; Smyth, Joshua M; Sliwinski, Martin J

2018-04-01

Research on the effect of exposure to minor stressors in people's daily lives consistently reports negative effects on indicators of well-being, often coined stress reactivity. Recent advances in the intensity of data collection have brought about an increasing interest in within-day associations of stress exposure and indicators of well-being, including dynamic aspects of the stress response such as stress recovery. In the present work, we investigated the other end of the stress response: the anticipation of a stressor. We hypothesized that anticipation of an upcoming stressor would be accompanied by higher negative affect. Based on the anticipatory coping account, lower negative affect after occurrence of anticipated (vs. not anticipated) stressors was predicted. We approached this question with a measurement burst study that allowed us to disentangle variation in stress processes across different time scales. One-hundred and seventy-five participants (mean age = 50, range 20-79) completed up to 3 measurement bursts. Each burst consisted of an ecological momentary assessment with 5 assessments per day over 7 days. In line with our expectations, negative affect was significantly higher after stressor anticipation, especially on days with high levels of intrusive thoughts. However, negative affect was not lower after anticipated (vs. not anticipated) stressors. Findings point to the role of perseverative cognition in the effect of stressor anticipation. Directions for future research including the role of controllability and effects on stress recovery are outlined. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Effects of thermal deformation on optical instruments for space application

NASA Astrophysics Data System (ADS)

Segato, E.; Da Deppo, V.; Debei, S.; Cremonese, G.

2017-11-01

Optical instruments for space missions work in hostile environment, it's thus necessary to accurately study the effects of ambient parameters variations on the equipment. In particular optical instruments are very sensitive to ambient conditions, especially temperature. This variable can cause dilatations and misalignments of the optical elements, and can also lead to rise of dangerous stresses in the optics. Their displacements and the deformations degrade the quality of the sampled images. In this work a method for studying the effects of the temperature variations on the performance of imaging instrument is presented. The optics and their mountings are modeled and processed by a thermo-mechanical Finite Element Model (FEM) analysis, then the output data, which describe the deformations of the optical element surfaces, are elaborated using an ad hoc MATLAB routine: a non-linear least square optimization algorithm is adopted to determine the surface equations (plane, spherical, nth polynomial) which best fit the data. The obtained mathematical surface representations are then directly imported into ZEMAX for sequential raytracing analysis. The results are the variations of the Spot Diagrams, of the MTF curves and of the Diffraction Ensquared Energy due to simulated thermal loads. This method has been successfully applied to the Stereo Camera for the BepiColombo mission reproducing expected operative conditions. The results help to design and compare different optical housing systems for a feasible solution and show that it is preferable to use kinematic constraints on prisms and lenses to minimize the variation of the optical performance of the Stereo Camera.

Transposable elements contribute to activation of maize genes in response to abiotic stress.

PubMed

Makarevitch, Irina; Waters, Amanda J; West, Patrick T; Stitzer, Michelle; Hirsch, Candice N; Ross-Ibarra, Jeffrey; Springer, Nathan M

2015-01-01

Transposable elements (TEs) account for a large portion of the genome in many eukaryotic species. Despite their reputation as "junk" DNA or genomic parasites deleterious for the host, TEs have complex interactions with host genes and the potential to contribute to regulatory variation in gene expression. It has been hypothesized that TEs and genes they insert near may be transcriptionally activated in response to stress conditions. The maize genome, with many different types of TEs interspersed with genes, provides an ideal system to study the genome-wide influence of TEs on gene regulation. To analyze the magnitude of the TE effect on gene expression response to environmental changes, we profiled gene and TE transcript levels in maize seedlings exposed to a number of abiotic stresses. Many genes exhibit up- or down-regulation in response to these stress conditions. The analysis of TE families inserted within upstream regions of up-regulated genes revealed that between four and nine different TE families are associated with up-regulated gene expression in each of these stress conditions, affecting up to 20% of the genes up-regulated in response to abiotic stress, and as many as 33% of genes that are only expressed in response to stress. Expression of many of these same TE families also responds to the same stress conditions. The analysis of the stress-induced transcripts and proximity of the transposon to the gene suggests that these TEs may provide local enhancer activities that stimulate stress-responsive gene expression. Our data on allelic variation for insertions of several of these TEs show strong correlation between the presence of TE insertions and stress-responsive up-regulation of gene expression. Our findings suggest that TEs provide an important source of allelic regulatory variation in gene response to abiotic stress in maize.

Residual Stress Induced Mechanical Property Enhancement in Steel Encapsulated Light Metal Matrix Composites

NASA Astrophysics Data System (ADS)

Fudger, Sean James

Macro hybridized systems consisting of steel encapsulated light metal matrix composites (MMCs) were produced with the goal of creating a low cost/light weight composite system with enhanced mechanical properties. MMCs are frequently incorporated into advanced material systems due to their tailorable material properties. However, they often have insufficient ductility for many structural applications. The macro hybridized systems take advantage of the high strength, modulus, and damage tolerance of steels and high specific stiffness and low density of MMCs while mitigating the high density of steels and the poor ductility of MMCs. Furthermore, a coefficient of thermal expansion (CTE) mismatch induced residual compressive stress method is utilized as a means of improving the ductility of the MMCs and overall efficiency of the macro hybridized systems. Systems consisting of an A36, 304 stainless steel, or NitronicRTM 50 stainless steel shell filled with an Al-SiC, Al-Al2O3, or Mg-B4C MMC are evaluated in this work. Upon cooling from processing temperatures, residual strains are generated due to a CTE mismatch between each of the phases. The resulting systems offer higher specific properties and a more structurally efficient system can be attained. Mechanical testing was performed and improvements in yield stress, ultimate tensile stress, and ductility were observed. However, the combination of these dissimilar materials often results in the formation of intermetallic compounds. In certain loading situations, these typically brittle intermetallic layers can result in degraded performance. X-ray Diffraction (XRD), X-ray Energy Dispersive Spectroscopy (EDS), and Electron Backscatter Diffraction (EBSD) are utilized to characterize the intermetallic layer formation at the interface between the steel and MMC. As the residual stress condition in each phase has a large impact on the mechanical property improvement, accurate quantification of these strains/stresses is paramount. X-ray Diffraction Residual Stress Analysis (XRD-RSA) or Neutron diffraction was performed on numerous systems in multiple steel shell thickness variations. The analysis shows variation in the measured strain and stress results due to outer steel thickness, difference in CTE between materials, and relative position within the composite. Improvements in mechanical properties, namely ductility and yield stress, are a direct result of these measured strains.

Temporal changes of static stress drop as a proxy for poroelastic effects at The Geysers geothermal field, California

NASA Astrophysics Data System (ADS)

Staszek, Monika; Orlecka-Sikora, Beata; Lasocki, Stanislaw; Kwiatek, Grzegorz; Leptokaropoulos, Konstantinos; Martinez-Garzon, Patricia

2017-04-01

One of the major environmental impacts of shale gas exploitation is triggered and induced seismicity. Due to the similarity of fluid injection process data from geothermal fields can be used as a proxy for shale gas exploitation associated seismicity. Therefore, in this paper we utilize 'The Geysers' dataset compiled within SHale gas Exploration and Exploitation induced Risks (SHEER) project. The dependence of earthquake static stress drops on pore pressure in the medium was previously suggested by Goertz-Allmann et al. (2011), who observed an increase of the static stress drop with the distance from injection well during reservoir stimulation at Deep Heat Mining project in Basel, Switzerland. Similar observation has been done by Kwiatek et al. (2014) in Berlín geothermal field, El Salvador. In this study, we use a high-quality data from The Geysers geothermal field to determine whether the static stress drops and the stress drop distributions change statistically significantly in time or not, and how such changes are correlated with the values of hypocenter depth, water injection rate, and distance from injection well. For the analyses we use a group of 354 earthquakes, which occurred in the proximity of Prati-9 and Prati-29 injection wells. Spectral parameters of these earthquakes were determined using mesh spectral ratio technique. Our results indicate that: (1) the static stress drop variation in time is statistically significant, (2) median static stress drop is inversely related to median injection rate. Therefore, it is highly expected that static stress drop is influenced by pore pressure in underground fluid injection conditions. References: Goertz-Allmann B., Goertz A., Wiemer S. (2011), Stress drop variations of induced earthquakes at the Basel geothermal site. Geophysical Research Letters, 38, L09308, doi:10.1029/2011GL047498. Kwiatek G., Bulut F., Bohnhoff M., Dresen G. (2014), High-resolution analysis of seismicity induced at Berlin geothermal field, El Salvador. Geothermics, 52, 98-111, doi: 10.1016/j.geothermics.2013.09.008. Acknowledgements: This work was supported under SHEER: "Shale Gas Exploration and Exploitation Induced Risks" project funded from Horizon 2020 - R&I Framework Programme, call H2020-LCE-2014-1 and by the Ministry of Science and Higher Education of Poland under project no. 500-10-27.

Health Professionals Facing Burnout: What Do We Know about Nursing Managers?

PubMed

Heeb, Jean-Luc; Haberey-Knuessi, Véronique

2014-01-01

Objective. To address the degree of burnout in nursing managers in hospitals of Western Switzerland, including comparison with medical managers, and its relationship with personal, work-related, and organizational characteristics. Methods. Statistical analysis of the scores of the Maslach Burnout Inventory-Human Services Survey from 257 nursing managers who answered a standardized electronic questionnaire. Results. Nursing managers showed a low degree of burnout, which was similar to that of medical managers. Most of them had a low level of emotional exhaustion and a low level of depersonalization, while personal accomplishment was contrasted. Only 2.3% had a high degree of burnout. These findings challenge the hypothesis of high stress being associated with high burnout, as nursing managers can be supposed to have a highly demanding job due to their intermediary position within the hospital hierarchy. Variations of burnout by personal, work-related, and organizational characteristics mainly concerned emotional exhaustion. Conclusion. Though nursing managers face a highly demanding job, they may benefit from resources (including coping strategies and empowerment) which help counterbalance job stress. Unequal distribution of resources may play a central role when facing burnout.

Health Professionals Facing Burnout: What Do We Know about Nursing Managers?

PubMed Central

Haberey-Knuessi, Véronique

2014-01-01

Objective. To address the degree of burnout in nursing managers in hospitals of Western Switzerland, including comparison with medical managers, and its relationship with personal, work-related, and organizational characteristics. Methods. Statistical analysis of the scores of the Maslach Burnout Inventory-Human Services Survey from 257 nursing managers who answered a standardized electronic questionnaire. Results. Nursing managers showed a low degree of burnout, which was similar to that of medical managers. Most of them had a low level of emotional exhaustion and a low level of depersonalization, while personal accomplishment was contrasted. Only 2.3% had a high degree of burnout. These findings challenge the hypothesis of high stress being associated with high burnout, as nursing managers can be supposed to have a highly demanding job due to their intermediary position within the hospital hierarchy. Variations of burnout by personal, work-related, and organizational characteristics mainly concerned emotional exhaustion. Conclusion. Though nursing managers face a highly demanding job, they may benefit from resources (including coping strategies and empowerment) which help counterbalance job stress. Unequal distribution of resources may play a central role when facing burnout. PMID:24804090

Bias Stress and Temperature Impact on InGaZnO TFTs and Circuits

PubMed Central

Martins, Jorge; Bahubalindruni, Pydi; Rovisco, Ana; Kiazadeh, Asal; Martins, Rodrigo; Fortunato, Elvira; Barquinha, Pedro

2017-01-01

This paper focuses on the analysis of InGaZnO thin-film transistors (TFTs) and circuits under the influence of different temperatures and bias stress, shedding light into their robustness when used in real-world applications. For temperature-dependent measurements, a temperature range of 15 to 85 °C was considered. In case of bias stress, both gate and drain bias were applied for 60 min. Though isolated transistors show a variation of drain current as high as 56% and 172% during bias voltage and temperature stress, the employed circuits were able to counteract it. Inverters and two-TFT current mirrors following simple circuit topologies showed a gain variation below 8%, while the improved robustness of a cascode current mirror design is proven by showing a gain variation less than 5%. The demonstration that the proper selection of TFT materials and circuit topologies results in robust operation of oxide electronics under different stress conditions and over a reasonable range of temperatures proves that the technology is suitable for applications such as smart food packaging and wearables. PMID:28773037

Bias Stress and Temperature Impact on InGaZnO TFTs and Circuits.

PubMed

Martins, Jorge; Bahubalindruni, Pydi; Rovisco, Ana; Kiazadeh, Asal; Martins, Rodrigo; Fortunato, Elvira; Barquinha, Pedro

2017-06-21

This paper focuses on the analysis of InGaZnO thin-film transistors (TFTs) and circuits under the influence of different temperatures and bias stress, shedding light into their robustness when used in real-world applications. For temperature-dependent measurements, a temperature range of 15 to 85 °C was considered. In case of bias stress, both gate and drain bias were applied for 60 min. Though isolated transistors show a variation of drain current as high as 56% and 172% during bias voltage and temperature stress, the employed circuits were able to counteract it. Inverters and two-TFT current mirrors following simple circuit topologies showed a gain variation below 8%, while the improved robustness of a cascode current mirror design is proven by showing a gain variation less than 5%. The demonstration that the proper selection of TFT materials and circuit topologies results in robust operation of oxide electronics under different stress conditions and over a reasonable range of temperatures proves that the technology is suitable for applications such as smart food packaging and wearables.

A RE-EXAMINATION OF VARIATION ASSOCIATED WITH ENVIRONMENTALLY STRESSED ORGANISMS

EPA Science Inventory

Variation is an essential feature of biological systems. Populations adapt to dynamic environments, in part, because of this variation. In this review, we re-examine phenotypic variation, especially in organisms living in polluted environments. A recent goal of ecotoxicology is t...

Lipid peroxidation, occupational stress and aging in workers of a prehospital emergency service.

PubMed

Casado, Angela; De Lucas, Nieves; López-Fernández, Encarnación; Sánchez, Alberto; Jimenez, José-Antonio

2006-06-01

Stressful conditions lead to formation of excessive free radicals, and lipid peroxidation is one of the major outcomes of free radical-mediated injury that directly damages membranes and generates a number of secondary products. To determine the levels of malondialdehyde, an end product of lipid peroxidation, according to demographic and occupational variables in workers of a prehospital emergency service and to analyse the relationship between malondialdehyde levels and burnout. One hundred and eleven healthy workers of a prehospital emergency service and eighty aged-matched healthy individuals of both sexes as a control group were surveyed. Malondialdehyde levels were measured by the Bull and Marnett method. To measure burnout, the Maslach Burnout Inventory was used. Professional category is associated with lipid peroxidation and burnout levels (Malondialdehyde levels were: physicians 338.10+/-14.47, nurses 329.17+/-12.62 and technicians 296.74+/-14.28; burnout levels were: physicians 41.29+/-3.59, nurses 37.38+/-6.05 and technicians 35.33+/-5.87). Working at night and in the evening increased malondialdehyde and burnout levels. Malondialdehyde levels increase with age. No significant variations with respect to sex were detected. Significant variations in malondialdehyde levels were detected between singles (303.13+/-12.74) and married people (344.43+/-13.43) but not with respect to divorcees (326.44+/-11.74). Significant differences were detected in erythrocyte malondialdehyde levels between smokers (341.37+/-17.09) and nonsmokers (302.21+/-12.38), but not for alcohol consumption. These findings suggest a positive correlation between malondialdehyde, a biomarker of lipid peroxidation and occupational stress, as estimated by elements of the Maslach Burnout Inventory, and oxidative stress.

Mechanics of Multifault Earthquake Ruptures

NASA Astrophysics Data System (ADS)

Fletcher, J. M.; Oskin, M. E.; Teran, O.

2015-12-01

The 2010 El Mayor-Cucapah earthquake of magnitude Mw 7.2 produced the most complex rupture ever documented on the Pacific-North American plate margin, and the network of high- and low-angle faults activated in the event record systematic changes in kinematics with fault orientation. Individual faults have a broad and continuous spectrum of slip sense ranging from endmember dextral strike slip to normal slip, and even faults with thrust sense of dip slip were commonly observed in the aftershock sequence. Patterns of coseismic slip are consistent with three-dimensional constrictional strain and show that integrated transtensional shearing can be accommodated in a single earthquake. Stress inversions of coseismic surface rupture and aftershock focal mechanisms define two coaxial, but permuted stress states. The maximum (σ1) and intermediate (σ2) principal stresses are close in magnitude, but flip orientations due to topography- and density-controlled gradients in lithostatic load along the length of the rupture. Although most large earthquakes throughout the world activate slip on multiple faults, the mechanical conditions of their genesis remain poorly understood. Our work attempts to answer several key questions. 1) Why do complex fault systems exist? They must do something that simple, optimally-oriented fault systems cannot because the two types of faults are commonly located in close proximity. 2) How are faults with diverse orientations and slip senses prepared throughout the interseismic period to fail spontaneously together in a single earthquake? 3) Can a single stress state produce multi-fault failure? 4) Are variations in pore pressure, friction and cohesion required to produce simultaneous rupture? 5) How is the fabric of surface rupture affected by variations in orientation, kinematics, total geologic slip and fault zone architecture?

Stress monitoring versus microseismic ruptures in an active deep mine

NASA Astrophysics Data System (ADS)

Tonnellier, Alice; Bouffier, Christian; Bigarré, Pascal; Nyström, Anders; Österberg, Anders; Fjellström, Peter

2015-04-01

Nowadays, underground mining industry has developed high-technology mass mining methods to optimise the productivity at deep levels. Such massive extraction induces high-level stress redistribution generating seismic events around the mining works, threatening safety and economics. For this reason mining irregular deep ore bodies calls for steadily enhanced scientific practises and technologies to guarantee the mine environment to be safer and stable for the miners and the infrastructures. INERIS, within the framework of the FP7 European project I2Mine and in partnership with the Swedish mining company Boliden, has developed new methodologies in order to monitor both quasi-static stress changes and ruptures in a seismic prone area. To this purpose, a unique local permanent microseismic and stress monitoring network has been installed into the deep-working Garpenberg mine situated to the north of Uppsala (Sweden). In this mine, ore is extracted using sublevel stoping with paste fill production/distribution system and long-hole drilling method. This monitoring network has been deployed between about 1100 and 1250 meter depth. It consists in six 1-component and five 3-component microseismic probes (14-Hz geophones) deployed in the Lappberget area, in addition to three 3D stress monitoring cells that focus on a very local exploited area. Objective is three-fold: to quantify accurately quasi-static stress changes and freshly-induced stress gradients with drift development in the orebody, to study quantitatively those stress changes versus induced detected and located microseismic ruptures, and possibly to identify quasi-static stress transfer from those seismic ruptures. Geophysical and geotechnical data are acquired continuously and automatically transferred to INERIS datacenter through the web. They are made available on a secured web cloud monitoring infrastructure called e.cenaris and completed with mine data. Such interface enables the visualisation of the monitoring data coming from the mine in quasi-real time and facilitates information exchanges and decision making for experts and stakeholders. On the basis of these data acquisition and sharing, preliminary analysis has been started to highlight whether stress variations and seismic sources behaviour might be directly bound with mine working evolution and could improve the knowledge on the equilibrium states inside the mine. Knowing such parameters indeed will be a potential solution to understand better the response of deep mining activities to the exploitation solicitations and to develop, if possible, methods to prevent from major hazards such as rock bursts and other ground failure phenomena.

Biotic and abiotic drivers of intraspecific trait variation within plant populations of three herbaceous plant species along a latitudinal gradient.

PubMed

Helsen, Kenny; Acharya, Kamal P; Brunet, Jörg; Cousins, Sara A O; Decocq, Guillaume; Hermy, Martin; Kolb, Annette; Lemke, Isgard H; Lenoir, Jonathan; Plue, Jan; Verheyen, Kris; De Frenne, Pieter; Graae, Bente J

2017-12-12

The importance of intraspecific trait variation (ITV) is increasingly acknowledged among plant ecologists. However, our understanding of what drives ITV between individual plants (ITV BI ) at the population level is still limited. Contrasting theoretical hypotheses state that ITV BI can be either suppressed (stress-reduced plasticity hypothesis) or enhanced (stress-induced variability hypothesis) under high abiotic stress. Similarly, other hypotheses predict either suppressed (niche packing hypothesis) or enhanced ITV BI (individual variation hypothesis) under high niche packing in species rich communities. In this study we assess the relative effects of both abiotic and biotic niche effects on ITV BI of four functional traits (leaf area, specific leaf area, plant height and seed mass), for three herbaceous plant species across a 2300 km long gradient in Europe. The study species were the slow colonizing Anemone nemorosa, a species with intermediate colonization rates, Milium effusum, and the fast colonizing, non-native Impatiens glandulifera. Climatic stress consistently increased ITV BI across species and traits. Soil nutrient stress, on the other hand, reduced ITV BI for A. nemorosa and I. glandulifera, but had a reversed effect for M. effusum. We furthermore observed a reversed effect of high niche packing on ITV BI for the fast colonizing non-native I. glandulifera (increased ITV BI ), as compared to the slow colonizing native A. nemorosa and M. effusum (reduced ITV BI ). Additionally, ITV BI in the fast colonizing species tended to be highest for the vegetative traits plant height and leaf area, but lowest for the measured generative trait seed mass. This study shows that stress can both reduce and increase ITV BI , seemingly supporting both the stress-reduced plasticity and stress-induced variability hypotheses. Similarly, niche packing effects on ITV BI supported both the niche packing hypothesis and the individual variation hypothesis. These results clearly illustrates the importance of simultaneously evaluating both abiotic and biotic factors on ITV BI . This study adds to the growing realization that within-population trait variation should not be ignored and can provide valuable ecological insights.

Allele specific expression analysis identifies regulatory variation associated with stress-related genes in the Mexican highland maize landrace Palomero Toluqueño

PubMed Central

González-Segovia, Eric; Ross-Ibarra, Jeffrey; Simpson, June K.

2017-01-01

Background Gene regulatory variation has been proposed to play an important role in the adaptation of plants to environmental stress. In the central highlands of Mexico, farmer selection has generated a unique group of maize landraces adapted to the challenges of the highland niche. In this study, gene expression in Mexican highland maize and a reference maize breeding line were compared to identify evidence of regulatory variation in stress-related genes. It was hypothesised that local adaptation in Mexican highland maize would be associated with a transcriptional signature observable even under benign conditions. Methods Allele specific expression analysis was performed using the seedling-leaf transcriptome of an F1 individual generated from the cross between the highland adapted Mexican landrace Palomero Toluqueño and the reference line B73, grown under benign conditions. Results were compared with a published dataset describing the transcriptional response of B73 seedlings to cold, heat, salt and UV treatments. Results A total of 2,386 genes were identified to show allele specific expression. Of these, 277 showed an expression difference between Palomero Toluqueño and B73 alleles under benign conditions that anticipated the response of B73 cold, heat, salt and/or UV treatments, and, as such, were considered to display a prior stress response. Prior stress response candidates included genes associated with plant hormone signaling and a number of transcription factors. Construction of a gene co-expression network revealed further signaling and stress-related genes to be among the potential targets of the transcription factors candidates. Discussion Prior activation of responses may represent the best strategy when stresses are severe but predictable. Expression differences observed here between Palomero Toluqueño and B73 alleles indicate the presence of cis-acting regulatory variation linked to stress-related genes in Palomero Toluqueño. Considered alongside gene annotation and population data, allele specific expression analysis of plants grown under benign conditions provides an attractive strategy to identify functional variation potentially linked to local adaptation. PMID:28852597

Variations of melatonin and stress hormones under extended shifts and radiofrequency electromagnetic radiation.

PubMed

Vangelova, Katia Koicheva; Israel, Mishel Salvador

2005-01-01

We studied the time-of-day variations in urinary levels of 6-sulphatoxy-melatonin and three stress hormones in operators working fast-rotating extended shifts under radiofrequency electromagnetic radiation (EMR). The excretion rate of the hormones was monitored by radioimmunoassay and spectrofluorimetry at 4-hour intervals in a group of 36 male operators comprising 12 broadcasting station operators, 12 TV station operators, and a control group of 12 satellite station operators. Measuring the time-weighted average (TWA) of EMR exposure revealed a high-level of exposure in broadcasting station operators (TWAmean= 3.10 microW/ cm2, TWAmax = 137.00 microW/cm2), a low-level in TV station operators (TWAmean = 1.89 microW/cm2, TWAmax = 5.24 microW/cm2), and a very low level in satellite station operators. The differences among the groups remained the same after confounding factors were taken into account. Radiofrequency EMR had no effect on the typical diurnal pattern of 6-sulphatoxymelatonin. High-level radiofrequency EMR exposure significantly increased the excretion rates of cortisol (p < 0.001), adrenaline (p = 0.028), and noradrenaline (p < 0.000), whereas changes under low-level exposure did not reach significance. The 24-hour excretion of cortisol and noradrenaline correlated with TWAmean and TWAmax. In conclusion, the excretion of 6-sulphatoxymelatonin retained a typical diurnal pattern under fast-rotating extended shifts and radiofrequency EMR, but showed an exposure-effect relation with stress hormones.

Characterization of PDMS samples with variation of its synthesis parameters for tunable optics applications

NASA Astrophysics Data System (ADS)

Marquez-Garcia, Josimar; Cruz-Félix, Angel S.; Santiago-Alvarado, Agustin; González-García, Jorge

2017-09-01

Nowadays the elastomer known as polydimethylsiloxane (PDMS, Sylgard 184), due to its physical properties, low cost and easy handle, have become a frequently used material for the elaboration of optical components such as: variable focal length liquid lenses, optical waveguides, solid elastic lenses, etc. In recent years, we have been working in the characterization of this material for applications in visual sciences; in this work, we describe the elaboration of PDMSmade samples, also, we present physical and optical properties of the samples by varying its synthesis parameters such as base: curing agent ratio, and both, curing time and temperature. In the case of mechanical properties, tensile and compression tests were carried out through a universal testing machine to obtain the respective stress-strain curves, and to obtain information regarding its optical properties, UV-vis spectroscopy is applied to the samples to obtain transmittance and absorbance curves. Index of refraction variation was obtained through an Abbe refractometer. Results from the characterization will determine the proper synthesis parameters for the elaboration of tunable refractive surfaces for potential applications in robotics.

Transport properties at fluids interfaces: a molecular study for a macroscopic modelling

NASA Astrophysics Data System (ADS)

Russo, Antonio; Morciano, Matteo; Sibley, David N.; Nold, Andreas; Goddard, Benjamin D.; Asinari, Pietro; Kalliadasis, Serafim

2017-11-01

Rapid developments in the field of micro- and nano-fluidics require detailed analysis of the properties of matter at the molecular level. But despite numerous works in the literature, appropriate macroscopic relations able to integrate a microscopic description of fluid and soft matter properties at liquid-vapour and multi-fluid interfaces are missing. As a consequence, studies on interfacial phenomena and micro-device designs often rely on oversimplified assumptions, e.g. that the viscosities can be considered constant across interfaces. In our work, we present non-equilibrium MD simulations to scrutinise efficiently and systematically, through the tools of statistical mechanics, the anisotropic properties of fluids, namely density variations, stress tensor, and shear viscosity, at the fluid interfaces between liquid and vapour and between two partially miscible fluids. Our analysis has led to the formulation of a general relation between shear viscosity and density variations validated for a wide spectrum of interfacial fluid problems. In addition, it provides a rational description of other interfacial quantities of interest, including surface tension and its origins, and more generally, it offers valuable insight of molecular transport phenomena at interfaces.

A study on work stress, stress coping strategies and health promoting lifestyle among district hospital nurses in Taiwan.

PubMed

Lee, Wei-Lun; Tsai, Shieunt-Han; Tsai, Chao-Wen; Lee, Chia-Ying

2011-01-01

To determine work stress, and stress-coping strategies, and to analyze their the relationships in order to improve health-promoting lifestyle of nurses in Taiwan. Three hundred eighty-five nurses who had work experience for more than 6 mo, were selected from four district hospitals in Kaohsiung and Ping Tung. We used a stratified cluster random sampling method for the selection. The nurses answered a self-report questionnaire, which was categorized into four sections: personal background data, work stress, stress-coping strategies, and health-promoting lifestyle. The findings indicate work stress and the health promoting lifestyle of nurses are at a higher level, with stress-coping strategies being at a medium level. Work stress and stress-coping strategies were significantly and positively correlated. Professional relationships, managerial role, personal responsibility, and recognition of work stress and the responsibilities of a health-promoting lifestyle were negatively correlated. Managerial role, personal responsibility, and organizational atmosphere of work stress as well as realization, an item of health-promoting lifestyle, were negatively correlated. Recognition of work stress and stress management, items of health-promoting lifestyle, were negatively correlated. Health responsibility, and self-actualization, items of health-promoting lifestyle, as well as stress-coping strategies were negatively correlated. Nutrition, an item of health-promoting lifestyle, and the support stress-coping strategy was negatively correlated. Nurses have greater work pressure and better work stress-coping strategies, but worse health responsibility and realization of a health-promoting lifestyle. We suggest hospitals build good relationships and appropriately increase employment of nurses through a good work atmosphere to achieve nurses' realization of a health-promoting lifestyle.

Monitoring stress-related mass variations in Amazon trees using accelerometers

NASA Astrophysics Data System (ADS)

van Emmerik, T. H. M.; Steele-Dunne, S. C.; Gentine, P.; Hut, R.; Guerin, M. F.; Leus, G.; Oliveira, R. S.; Van De Giesen, N.

2016-12-01

Containing half of the world's rainforests, the Amazon plays a key role in the global water and carbon budget. However, the Amazon remains poorly understood, but appears to be vulnerable to increasing moisture stress, and future droughts have the potential to considerably change the global water and carbon budget. Field measurements will allow further investigations of the effects of moisture stress and droughts on tree dynamics, and its impact on the water and carbon budget. This study focuses on studying the diurnal mass variations of seven Amazonian tree species. The mass of trees is influenced by physiological processes within the tree (e.g. transpiration and root water uptake), as well as external loads (e.g. intercepted precipitation). Depending on the physiological traits of an individual tree, moisture stress and drought affect processes such as photosynthesis, assimilation, transpiration, and root water uptake. In turn, these have their influence on diurnal mass variations of a tree. Our study uses measured three-dimensional displacement and acceleration of trees, to detect and quantify their diurnal (bio)mass variations. Nineteen accelerometers and dendrometers were installed on seven different tree species in the Amazon rainforest, covering an area of 250 x 250 m. The selected species span a wide range in wood density (0.5 - 1.1), diameter (15 - 40 cm) and height (25 - 60 m). Acceleration was measured with a frequency of 10 Hz, from August 2015 to June 2016, covering both the wet and dry season. On-site additional measurements of net radiation, wind speed at three heights, temperature, and precipitation as available every 15 minutes. Dendrometers measured variation in xylem and bark thickness every 5 minutes. The MUltiple SIgnal Classification (MUSIC) algorithm was applied to the acceleration time series to estimate the frequency spectrum of each tree. A correction was necessary to account for the dominant effect of wind. The resulting spectra reveal clear diurnal variations, as well as changes during precipitation events. Comparison with ancillary data suggests that we can extract information on diurnal mass variations from the accelerometer data. This may provide valuable insight into the effects of water stress on mass variations in different Amazon tree species.

Piezo-tunnel effect in Al/Al2O3/Al junctions elaborated by atomic layer deposition

NASA Astrophysics Data System (ADS)

Rafael, R.; Puyoo, E.; Malhaire, C.

2017-11-01

In this work, the electrical transport in Al/Al2O3/Al junctions under mechanical stress is investigated in the perspective to use them as strain sensors. The metal/insulator/metal junctions are elaborated with a low temperature process (≤200 °C) fully compatible with CMOS back-end-of-line. The conduction mechanism in the structure is found to be Fowler-Nordheim tunneling, and efforts are made to extract the relevant physical parameters. Gauge factors up to -32.5 were found in the fabricated devices under tensile stress. Finally, theoretical mechanical considerations give strong evidence that strain sensitivity in Al/Al2O3/Al structures originates not only from geometrical deformations but also from the variation of interface barrier height and/or effective electronic mass in the tunneling oxide layer.

Spectral (optical) and mechanical responses of fresh and cryopreserved issued arteries

NASA Astrophysics Data System (ADS)

Pery, Emilie; Blondel, Walter C.; Goebel, Jean-Christophe; Didelon, Jacques; Guillemin, Francois

2005-04-01

Cryopreservation is the only method for conserving blood vessels as future allografts with biological immunity controls. Although it affects vessels mechanical structure, no biomechanical integrity simple test is available today. Biological tissues optical properties characterization by spectroscopic methods is of interest due to their types or natures variations. Collected data complementarity contributes to "photodiagnosis" applicative prospects (cancer, vascular...). Pig carotid artery rings were tested after excision and after one month cryopreservation. An uniaxial mechanical testing device was used for ring stretching, and elongation and axial forces measurement. Circumferential large strains and stresses were calculated. Simultaneously, each artery ring optical characteristics was measured using fibered autofluorescence and elastic scattering spectrometers. Mechanical results showed nonlinear strain/stress curves and large deformations in good agreement with other referenced works. Significant differences (p<0.05) between fresh and cryopreserved rings mechanical properties were noticed. Elastic scattering spectra intensity variations were well correlated with artery mechanical properties. The standardized autofluorescence spectra were more clearly correlated with anatomo-histological changes due to cryopreservation, providing rather accurate differentiation between fresh and cryopreserved samples. This study offers a new perspective to detect changes of cryopreserved arterial samples mechanical properties. Coupling mechanical tests (uniaxial traction of arterial rings) and optical spectroscopic measurements (autofluorescence, elastic scattering) is the driving point: it allows correlating mechanical modifications and spectral variations of artery rings before and after cryopreservation. Ultimately, this new approach could help developping a device allowing non-invasive, atraumatic and contactless optical examinations of arterial graft to assess its mechanical state before reimplantation.

Work stress, burnout, and perceived quality of care: a cross-sectional study among hospital pediatricians.

PubMed

Weigl, M; Schneider, A; Hoffmann, F; Angerer, P

2015-09-01

Poor hospital work environments affect physicians' work stress. With a focus on hospital pediatricians, we sought to investigate associations between work stress, burnout, and quality of care. A cross-sectional study was conducted in N = 96 pediatricians of a German academic children's hospital (response rate = 73.8 %). All variables were assessed with standardized questionnaires. Multivariate regression analyses were applied to investigate associations after adjusting for potential confounders. Critically high work stress (effort/reward ratio, ERR > 1.0) was reported by N = 25 (28.4 %) participants. Pediatricians in inpatient wards had significantly more work stress than their colleagues in intensive care units and outpatient wards; 10.2 % of surveyed pediatricians reported critically high burnout. Again, inpatient ward staff reported significantly increased emotional exhaustion. After controlling for several confounders, we found that pediatricians with high work stress and emotional exhaustion reported reduced quality of care. Mediation analyses revealed that especially pediatricians' emotional exhaustion partially mediated the effect of work stress on quality of care. Results demonstrate close relationships between increased work stress and burnout as well as diminished quality of care. High work stress environments in pediatric care influence mental health of pediatricians as well as quality of patient care. • The quality of pediatricians' work environment in the hospital is associated with their work stress and burnout. • The consequences of pediatricians' work life for the quality of care need to be addressed in order to inform interventions to improve work life and care quality. • Our study shows associations between increased work stress and burnout with mitigated quality of care. • Beyond indirect effects of work stress through emotional exhaustion on quality of care we also observed direct detrimental effects of pediatricians' work stress on mitigated care quality.

Adrenal sensitivity to stress is maintained despite variation in baseline glucocorticoids in moulting seals

PubMed Central

Champagne, Cory; Tift, Michael; Houser, Dorian; Crocker, Daniel

2015-01-01

Stressful disturbances activate the hypothalamic–pituitary–adrenal (HPA) axis and result in the release of glucocorticoid (GC) hormones. This characteristic stress response supports immediate energetic demands and subsequent recovery from disturbance. Increased baseline GC concentrations may indicate chronic stress and can impair HPA axis function during exposure to additional stressors. Levels of GCs, however, vary seasonally and with life-history stage, potentially confounding their interpretation. Our objective was to evaluate HPA axis function across variations in baseline GC levels. Northern elephant seals show substantial baseline variation in GC levels during their annual moulting period. We therefore conducted measurements early, in the middle and at the end of moulting; we simulated an acute stressor by administering adrenocorticotrophic hormone and evaluated the changes in circulating hormones and metabolites over the following 2 h. The stress response was characterized by increases in both cortisol and aldosterone (F7,105 = 153 and 25.3, respectively; P < 0.001). These hormones increased in parallel and the slopes of their relationship varied by study group, suggesting they are regulated in a co-­ordinated manner during acute stress in this species. There was no detectable difference in the total release of cortisol or aldosterone among study groups, indicating that the HPA axis remained sensitive to stimulation by adrenocorticotrophic hormone despite varying baseline levels of GCs. Acute stress influenced carbohydrate and fat metabolism in all study groups, but protein catabolism was affected to a far lesser degree. These findings suggest that elephant seals, and potentially other pinniped species, are resilient to moderate variations in baseline GC levels and remain capable of mounting a response to additional stressors. PMID:27293689

Seasonality influence on biochemical and hematological indicators of stress and growth of pirarucu (Arapaima gigas), an Amazonian air-breathing fish.

PubMed

Bezerra, Rosiely Felix; Soares, Maria do Carmo Figueiredo; Santos, Athiê Jorge Guerra; Carvalho, Elba Verônica Matoso Maciel; Coelho, Luana Cassandra Breitenbach Barroso

2014-01-01

Environmental factors such as seasonal cycles are the main chronic stress cause in fish increasing incidence of disease and mortality and affecting productive performance. Arapaima gigas (pirarucu) is an Amazonian air-breathing and largest freshwater fish with scales in the world. The captivity development of pirarucu is expanding since it can fatten up over 1 kg per month reaching 10 kg body mass in the first year of fattening. This work was conducted in three periods (April to July 2010, August to November 2010, and December 2010 to March 2011) defined according to rainfall and medium temperatures. Seasonality effect analysis was performed on biochemical (lectin activity, lactate dehydrogenase, and alkaline phosphatase activities) and hematological (total count of red blood cells, hematocrit, hemoglobin, and hematimetric Wintrobe indexes) stress indicators, as well as on growth and wellbeing degree expressed by pirarucu condition factor developed in captivity. All biochemical and hematological stress indicators showed seasonal variations. However, the fish growth was allometrically positive; condition factor high values indicated good state of healthiness in cultivation. These results reinforce the robust feature of pirarucu and represent a starting point for understanding stress physiology and environmental changes during cultivation enabling identification and prevention of fish adverse health conditions.

Interactive Effects of Nutrient and Mechanical Stresses on Plant Morphology

PubMed Central

Puijalon, Sara; Lena, Jean-Paul; Bornette, Gudrun

2007-01-01

Background and Aims Plant species frequently encounter multiple stresses under natural conditions, and the way they cope with these stresses is a major determinant of their ecological breadth. The way mechanical (e.g. wind, current) and resource stresses act simultaneously on plant morphological traits has been poorly addressed, even if both stresses often interact. This paper aims to assess whether hydraulic stress affects plant morphology in the same way at different nutrient levels. Methods An examination was made of morphological variations of an aquatic plant species growing under four hydraulic stress (flow velocity) gradients located in four habitats distributed along a nutrient gradient. Morphological traits covering plant size, dry mass allocation, organ water content and foliage architecture were measured. Key Results Significant interactive effects of flow velocity and nutrient level were observed for all morphological traits. In particular, increased flow velocity resulted in size reductions under low nutrient conditions, suggesting an adaptive response to flow stress (escape strategy). On the other hand, moderate increases in flow velocity resulted in increased size under high nutrient conditions, possibly related to an inevitable growth response to a higher nutrient supply induced by water renewal at the plant surface. For some traits (e.g. dry mass allocation), a consistent sense of variation as a result of increasing flow velocity was observed, but the amount of variation was either reduced or amplified under nutrient-rich compared with nutrient-poor conditions, depending on the traits considered. Conclusions These results suggest that, for a given species, a stress factor may result, in contrasting patterns and hence strategies, depending on a second stress factor. Such results emphasize the relevance of studies on plant responses to multiple stresses for understanding the actual ecological breadth of species. PMID:17913725

Theoretical Study on Stress Sensitivity of Fractal Porous Media with Irreducible Water

NASA Astrophysics Data System (ADS)

Lei, Gang; Dong, Zhenzhen; Li, Weirong; Wen, Qingzhi; Wang, Cai

The couple flow deformation behavior in porous media has drawn tremendous attention in various scientific and engineering fields. However, though the coupled flow deformation mechanism has been intensively investigated in the last decades, the essential controls on stress sensitivity are not determined. It is of practical significance to use analytic methods to study stress sensitivity of porous media. Unfortunately, because of the disordered and extremely complicated microstructures of porous media, the theoretical model for stress sensitivity is scarce. The goal of this work is to establish a novel and reasonable quantitative model to determine the essential controls on stress sensitivity. The predictions of the theoretical model, derived from the Hertzian contact theory and fractal geometry, agree well with the available experimental data. Compared with the previous models, our model takes into account more factors, including the influence of the water saturation and the microstructural parameters of the pore space. The proposed models can reveal more mechanisms that affect the coupled flow deformation behavior in fractal porous media. The results show that the irreducible water saturation increases with the increase of effective stress, and decreases with the increased rock elastic modulus (or increased power law index) at a given effective stress. The effect of stress variation on porosity is smaller than that on permeability. Under a given effective stress, the normalized permeability (or the normalized porosity) becomes smaller with the decrease of rock elastic modulus (or the decrease of power law index). And a lower capillary pressure will correspond to an increased rock elastic modulus (or an increased power law index) under a given water saturation.

Subsurface Stress Fields in FCC Single Crystal Anisotropic Contacts

NASA Technical Reports Server (NTRS)

Arakere, Nagaraj K.; Knudsen, Erik; Swanson, Gregory R.; Duke, Gregory; Ham-Battista, Gilda

2004-01-01

Single crystal superalloy turbine blades used in high pressure turbomachinery are subject to conditions of high temperature, triaxial steady and alternating stresses, fretting stresses in the blade attachment and damper contact locations, and exposure to high-pressure hydrogen. The blades are also subjected to extreme variations in temperature during start-up and shutdown transients. The most prevalent high cycle fatigue (HCF) failure modes observed in these blades during operation include crystallographic crack initiation/propagation on octahedral planes, and non-crystallographic initiation with crystallographic growth. Numerous cases of crack initiation and crack propagation at the blade leading edge tip, blade attachment regions, and damper contact locations have been documented. Understanding crack initiation/propagation under mixed-mode loading conditions is critical for establishing a systematic procedure for evaluating HCF life of single crystal turbine blades. This paper presents analytical and numerical techniques for evaluating two and three dimensional subsurface stress fields in anisotropic contacts. The subsurface stress results are required for evaluating contact fatigue life at damper contacts and dovetail attachment regions in single crystal nickel-base superalloy turbine blades. An analytical procedure is presented for evaluating the subsurface stresses in the elastic half-space, based on the adaptation of a stress function method outlined by Lekhnitskii. Numerical results are presented for cylindrical and spherical anisotropic contacts, using finite element analysis (FEA). Effects of crystal orientation on stress response and fatigue life are examined. Obtaining accurate subsurface stress results for anisotropic single crystal contact problems require extremely refined three-dimensional (3-D) finite element grids, especially in the edge of contact region. Obtaining resolved shear stresses (RSS) on the principal slip planes also involves considerable post-processing work. For these reasons it is very advantageous to develop analytical solution schemes for subsurface stresses, whenever possible.

A parametric approach to irregular fatigue prediction

NASA Technical Reports Server (NTRS)

Erismann, T. H.

1972-01-01

A parametric approach to irregular fatigue protection is presented. The method proposed consists of two parts: empirical determination of certain characteristics of a material by means of a relatively small number of well-defined standard tests, and arithmetical application of the results obtained to arbitrary loading histories. The following groups of parameters are thus taken into account: (1) the variations of the mean stress, (2) the interaction of these variations and the superposed oscillating stresses, (3) the spectrum of the oscillating-stress amplitudes, and (4) the sequence of the oscillating-stress amplitudes. It is pointed out that only experimental verification can throw sufficient light upon possibilities and limitations of this (or any other) prediction method.

Combined effect of Piezo-viscous dependency and non- Newtonian couple stresses in Annular Plates Squeeze-Film characteristics

NASA Astrophysics Data System (ADS)

Hanumagowda, B. N.; Savitramma, G.; Salma, A.; Noorjahan

2018-04-01

In this article, the theoretical analysis of the combined study of non-Newtonian couple stresses with piezo-viscous dependency for annular plates squeeze film bearings have been carried out, with help of stokes micro continuum theory along with the exponential variation of viscosity with pressure. An approximate analytical solution is found using a small perturbation method. The solution for pressure and load capacity with distinct values of viscosity-pressure parameter are calculated and compared with iso-viscous couple stress and Newtonian lubricants and the results reveals that the effect of couple stresses and pressure-dependent viscosity variation enhances the load-carrying capacity and lengthens the squeeze film time.

Residual thermal stresses in a solid sphere cast from a thermosetting material

NASA Technical Reports Server (NTRS)

Levitsky, M.; Shaffer, B. W.

1975-01-01

Expressions are developed for the residual thermal stresses in a solid sphere cast from a chemically hardening thermosetting material in a rigid spherical mold. The description of the heat generation rate and temperature variation is derived from a first-order chemical reaction. Solidification is described by the continuous transformation of the material from an inviscid liquidlike state into an elastic solid, with intermediate properties determined by the degree of chemical reaction. Residual stress components are obtained as functions of the parameters of the hardening process and the properties of the hardening material. Variation of the residual stresses with a nondimensionalized reaction rate parameter and the relative compressibility of the hardened material is discussed in detail.

Stiffness of the endplate boundary layer and endplate surface topography are associated with brittleness of human whole vertebral bodies

PubMed Central

Nekkanty, Srikant; Yerramshetty, Janardhan; Kim, Do-Gyoon; Zauel, Roger; Johnson, Evan; Cody, Dianna D.; Yeni, Yener N.

2013-01-01

Stress magnitude and variability as estimated from large scale finite element (FE) analyses have been associated with compressive strength of human vertebral cancellous cores but these relationships have not been explored for whole vertebral bodies. In this study, the objectives were to investigate the relationship of FE-calculated stress distribution parameters with experimentally determined strength, stiffness, and displacement based ductility measures in human whole vertebral bodies, investigate the effect of endplate loading conditions on vertebral stiffness, strength, and ductility and test the hypothesis that endplate topography affects vertebral ductility and stress distributions. Eighteen vertebral bodies (T6-L3 levels; 4 female and 5 male cadavers, aged 40-98 years) were scanned using a flat panel CT system and followed with axial compression testing with Wood’s metal as filler material to maintain flat boundaries between load plates and specimens. FE models were constructed using reconstructed CT images and filler material was added digitally. Two different FE models with different filler material modulus simulating Wood’s metal and intervertebral disc (W-layer and D-layer models) were used. Element material modulus to cancellous bone was based on image gray value. Average, standard deviation, and coefficient of variation of von Mises stress in vertebral bone for W-layer and D-layer models and also the ratios of FE parameters from the two models (W/D) were calculated. Inferior and superior endplate surface topographical distribution parameters were calculated. Experimental stiffness, maximum load and work to fracture had the highest correlation with FE-calculated stiffness while experimental ductility measures had highest correlations with FE-calculated average von Mises stress and W-layer to D-layer stiffness ratio. Endplate topography of the vertebra was also associated with its structural ductility and the distribution parameter that best explained this association was kurtosis of inferior endplate topography. Our results indicate that endplate topography variations may provide insight into the mechanisms responsible for vertebral fractures. PMID:20633709

Dispersive stresses in wind farms

NASA Astrophysics Data System (ADS)

Segalini, Antonio; Braunbehrens, Robert; Hyvarinen, Ann

2017-11-01

One of the most famous models of wind farms is provided by the assumption that the farm can be approximated as a horizontally-homogeneous forest canopy with vertically-varying force intensity. By means of this approximation, the flow-motion equations become drastically simpler, as many of the three-dimensional effects are gone. However, the application of the horizontal average operator to the RANS equations leads to the appearance of new transport terms (called dispersive stresses) originating from the horizontal (small-scale) variation of the mean velocity field. Since these terms are related to the individual turbine signature, they are expected to vanish outside the roughness sublayer, providing a definition for the latter. In the present work, an assessment of the dispersive stresses is performed by means of a wake-model approach and through the linearised code ORFEUS developed at KTH. Both approaches are very fast and enable the characterization of a large number of wind-farm layouts. The dispersive stress tensor and its effect on the turbulence closure models are investigated, providing guidelines for those simulations where it is impossible to resolve the farm at a turbine scale due to grid requirements (as, for instance, mesoscale simulations).

Accelerated stress testing of thin film solar cells: Development of test methods and preliminary results

NASA Technical Reports Server (NTRS)

Lathrop, J. W.

1985-01-01

If thin film cells are to be considered a viable option for terrestrial power generation their reliability attributes will need to be explored and confidence in their stability obtained through accelerated testing. Development of a thin film accelerated test program will be more difficult than was the case for crystalline cells because of the monolithic construction nature of the cells. Specially constructed test samples will need to be fabricated, requiring committment to the concept of accelerated testing by the manufacturers. A new test schedule appropriate to thin film cells will need to be developed which will be different from that used in connection with crystalline cells. Preliminary work has been started to seek thin film schedule variations to two of the simplest tests: unbiased temperature and unbiased temperature humidity. Still to be examined are tests which involve the passage of current during temperature and/or humidity stress, either by biasing in the forward (or reverse) directions or by the application of light during stress. Investigation of these current (voltage) accelerated tests will involve development of methods of reliably contacting the thin conductive films during stress.

Cardiovascular reactivity in a simulated job interview: the role of gender role self-concept.

PubMed

Sieverding, Monika; Weidner, Gerdi; von Volkmann, Bettina

2005-01-01

This study investigated the relation of gender role self-concept (G-SC) to cardiovascular and emotional reactions to an ecologically relevant stressor in a sample of graduating male and female university students. Thirty-seven men and 37 women completed the Personal Attribute Questionnaire and worked on four tasks designed to reflect common features of a job interview. Blood pressure and heart rate were measured at baseline, during, and after each task; subjective stress was measured at baseline and after each task. Subjective and objective stress scores were averaged across tasks and analyzed by sex and G-SC (i.e., instrumentality, expressiveness). Results indicated that women as a group demonstrated greater emotional reactivity, but did not differ in their physiological reactions when compared to men. Regardless of sex, participants' instrumentality scores contributed significantly to the variation in subjective stress response: those scoring high on instrumentality reported less stress, but evidenced greater blood pressure reactivity than those scoring low on instrumentality. These results suggest that gender roles, particularly an instrumental self-concept, may play an important role in both subjective and objective reactions to an ecologically relevant stressor.

Conflict management style, supportive work environments and the experience of work stress in emergency nurses.

PubMed

Johansen, Mary L; Cadmus, Edna

2016-03-01

To examine the conflict management style that emergency department (ED) nurses use to resolve conflict and to determine whether their style of managing conflict and a supportive work environment affects their experience of work stress. Conflict is a common stressor that is encountered as nurses strive to achieve patient satisfaction goals while delivering quality care. How a nurse perceives support may impact work stress levels and how they deal with conflict. A correlational design examined the relationship between supportive work environment, and conflict management style and work stress in a sample of 222 ED nurses using the expanded nurse work stress scale; the survey of perceived organisational support; and the Rahim organisational conflict inventory-II. Twenty seven percent of nurses reported elevated levels of work stress. A supportive work environment and avoidant conflict management style were significant predictors of work stress. Findings suggest that ED nurses' perception of a supportive work environment and their approach to resolving conflict may be related to their experience of work stress. Providing opportunities for ED nurses in skills training in constructive conflict resolution may help to reduce work stress and to improve the quality of patient care. © 2015 John Wiley & Sons Ltd.

On the Variation of Hardness Due to Uniaxial and Equi-Biaxial Residual Surface Stresses at Elastic-Plastic Indentation

NASA Astrophysics Data System (ADS)

Larsson, Per-Lennart

2018-05-01

It is established long since that the material hardness is independent of residual stresses at predominantly plastic deformation close to the contact region at indentation. Recently though, it has been shown that when elastic and plastic deformations are of equal magnitude this invariance is lost. For materials such as ceramics and polymers, this will complicate residual stress determination but can also, if properly understood, provide additional important information for performing such a task. Indeed, when the residual stresses are equi-biaxial, the situation is quite well understood, but additional efforts have to be made to understand the mechanical behavior in other loading states. Presently therefore, the variation of hardness, due to residual stresses, is examined at a uniaxial stress state. Correlation with global indentation quantities is analyzed, discussed and compared to corresponding equi-biaxial results. Cone indentation of elastic-perfectly plastic materials is considered.

Monitoring stress related velocity variation in concrete with a 2 x 10(-5) relative resolution using diffuse ultrasound.

PubMed

Larose, Eric; Hall, Stephen

2009-04-01

Ultrasonic waves propagating in solids have stress-dependent velocities. The relation between stress (or strain) and velocity forms the basis of non-linear acoustics. In homogeneous solids, conventional time-of-flight techniques have measured this dependence with spectacular precision. In heterogeneous media such as concrete, the direct (ballistic) wave around 500 kHz is strongly attenuated and conventional techniques are less efficient. In this manuscript, the effect of weak stress changes on the late arrivals constituting the acoustic diffuse coda is tracked. A resolution of 2 x 10(-5) in relative velocity change is attained which corresponds to a sensitivity to stress change of better than 50 kPa. Therefore, the technique described here provides an original way to measure the non-linear parameter with stress variations on the order of tens of kPa.

High-Temperature Slow Crack Growth of Silicon Carbide Determined by Constant-Stress-Rate and Constant-Stress Testing

NASA Technical Reports Server (NTRS)

Choi, Sung H.; Salem, J. A.; Nemeth, N. N.

1998-01-01

High-temperature slow-crack-growth behaviour of hot-pressed silicon carbide was determined using both constant-stress-rate ("dynamic fatigue") and constant-stress ("static fatigue") testing in flexure at 1300 C in air. Slow crack growth was found to be a governing mechanism associated with failure of the material. Four estimation methods such as the individual data, the Weibull median, the arithmetic mean and the median deviation methods were used to determine the slow crack growth parameters. The four estimation methods were in good agreement for the constant-stress-rate testing with a small variation in the slow-crack-growth parameter, n, ranging from 28 to 36. By contrast, the variation in n between the four estimation methods was significant in the constant-stress testing with a somewhat wide range of n= 16 to 32.

A Viscoplastic Stress Relaxation Model for Predicting Variations of the Least Principal Stress With Depth in Unconventional Reservoirs

NASA Astrophysics Data System (ADS)

Zoback, M. D.; Xu, S.; Rassouli, F.; Ma, X.

2016-12-01

In this paper we extend the viscoplastic stress relaxation model of Sone and Zoback (Jour. Petrol. Sci. and Eng., 2014) for predicting variations of least principal stress with stress and its impact on the vertical propagation of hydraulic fractures. Viscoplastic stress relaxation in clay-rich (or diagenetically immature) sedimentary rocks makes the stress field more isotropic. In normal faulting and strike-slip faulting environments, this causes the least principal stress to increase making such formations likely barriers to vertical hydraulic fracture growth. In order to predict the magnitude of viscoplastic stress relaxation in different unconventional formations, we generalize a constitutive law developed from a wide range of creep experiments in our lab over the past several years and apply it to areas of stacked pay in Oklahoma and Texas. Using frac gradients were measured from minifrac and DFIT (Diagnostic Fracture Injection Test) experiments. The viscoplastic model does a good job of explaining vertical hydraulic fracture propagation, as indicated by the distribution of microseismic events recorded during stimulation.

Coherency Between Volume Transport in the Antarctic Circumpolar Current and Southern Hemisphere Winds

NASA Astrophysics Data System (ADS)

Makowski, Jessica; Chambers, Don; Bonin, Jennifer

2013-04-01

Previous studies have suggested that ocean bottom pressure (OBP) can be used to measure the transport variability of the Antarctic Circumpolar Current (ACC). The OBP observations from the Gravity Recovery and Climate Experiment (GRACE) will be used to calculate transport along the 150°E longitude choke point, between Antarctica and Australia. We will examine whether zonally averaged wind stress, wind stress curl, or local zonal winds are more coherent with zonal mass transport variability. Preliminary studies suggest that seasonal variation in transport across 150°E is more correlated with winds along and north of the northern front of the ACC: the Sub Tropical front (STF). It also appears that interannual variations in transport along 150°E are related to wind variations south of the STF and centered south of the Sub Antarctic Front (SAF). We have observed a strong anti-correlation across the SAF, in the Indian Ocean, which suggests wind stress curl may also be responsible for transport variations. Preliminary results will be presented.

The Consequence of Combined Pain and Stress on Work Ability in Female Laboratory Technicians: A Cross-Sectional Study.

PubMed

Jay, Kenneth; Friborg, Maria Kristine; Sjøgaard, Gisela; Jakobsen, Markus Due; Sundstrup, Emil; Brandt, Mikkel; Andersen, Lars Louis

2015-12-11

Musculoskeletal pain and stress-related disorders are leading causes of impaired work ability, sickness absences and disability pensions. However, knowledge about the combined detrimental effect of pain and stress on work ability is lacking. This study investigates the association between pain in the neck-shoulders, perceived stress, and work ability. In a cross-sectional survey at a large pharmaceutical company in Denmark 473 female laboratory technicians replied to questions about stress (Perceived Stress Scale), musculoskeletal pain intensity (scale 0-10) of the neck and shoulders, and work ability (Work Ability Index). General linear models tested the association between variables. In the multi-adjusted model, stress (p < 0.001) and pain (p < 0.001) had independent main effects on the work ability index score, and there was no significant stress by pain interaction (p = 0.32). Work ability decreased gradually with both increased stress and pain. Workers with low stress and low pain had the highest Work Ability Index score (44.6 (95% CI 43.9-45.3)) and workers with high stress and high pain had the lowest score (32.7 (95% CI 30.6-34.9)). This cross-sectional study indicates that increased stress and musculoskeletal pain are independently associated with lower work ability in female laboratory technicians.

On the Nature of People's Reaction to Space Weather and Meteorological Weather Changes

NASA Astrophysics Data System (ADS)

Khabarova, O. V.; Dimitrova, S.

2009-12-01

Our environment includes many natural and artificial agents affecting any person on the Earth in one way or other. This work is focused on two of them - weather and space weather, which are permanently effective. Their cumulative effect is proved by means of the modeling. It is shown that combination of geomagnetic and solar indices and weather strength parameter (which includes six main meteorological parameters) correlates with health state significantly better (up to R=0.7), than separate environmental parameters do. The typical shape of any health characteristics' time-series during human body reaction to any negative impact represents a curve, well-known in medicine as a General Adaptation Syndrome curve by Hans Selye. We demonstrate this on the base of blood pressure time-series and acupunctural experiment data, averaged by group. The first stage of adaptive stress-reaction (resistance to stress) is sometimes observed 1-2 days before geomagnetic storm onset. The effect of "outstripping reaction to magnetic storm", named Tchizhevsky- Velkhover effect, had been known for many years, but its explanation was obtained recently due to the consideration of the near-Earth space plasma processes. It was shown that lowfrequency variations of the solar wind density on a background of the density growth can stimulate the development of the geomagnetic filed (GMF) variations of the wide frequency range. These variations seem to have "bioeffective frequencies", resonant with own frequencies of body organs and systems. The mechanism of human body reaction is supposed to be a parametrical resonance in low-frequency range (which is determined by the resonance in large-scale organs and systems) and a simple forced resonance in GHz-range of variations (the resonance of micro-objects in the organism such as DNA, cell membranes, blood ions etc.) Given examples of mass-reaction of the objects to ULF-range GMF variations during quiet space weather time prove this hypothesis.

Stress Reactivity and Corticolimbic Response to Emotional Faces in Adolescents

ERIC Educational Resources Information Center

Liu, Jie; Chaplin, Tara M.; Wang, Fei; Sinha, Rajita; Mayes, Linda C.; Blumberg, Hilary P.

2012-01-01

Objective: Adolescence is a critical period in the development of lifelong patterns of responding to stress. Understanding underpinnings of variations in stress reactivity in adolescents is important, as adolescents with altered stress reactivity are vulnerable to negative risk-taking behaviors including substance use, and have increased lifelong…

Plasma cortisol stress response in channel catfish, Ictalurus punctatus influences susceptibility to Edwardeseilla ictaluri

USDA-ARS?s Scientific Manuscript database

Cortisol is a primary stress hormone in fish as its plasma variations correlate with the occurrence of various stressful situations. Past studies have demonstrated that fish subjected to handling stress or poor water quality had a reduced ability to resist pathogens. Channel catfish fingerlings th...

Energetics of a two-phase model of lithospheric damage, shear localization and plate-boundary formation

NASA Astrophysics Data System (ADS)

Bercovici, David; Ricard, Yanick

2003-03-01

The two-phase theory for compaction and damage proposed by Bercovici et al. (2001a, J. Geophys. Res.,106, 8887-8906) employs a nonequilibrium relation between interfacial surface energy, pressure and viscous deformation, thereby providing a model for damage (void generation and microcracking) and a continuum description of weakening, failure and shear localization. Here we examine further variations of the model which consider (1) how interfacial surface energy, when averaged over the mixture, appears to be partitioned between phases; (2) how variability in deformational-work partitioning greatly facilitates localization; and (3) how damage and localization are manifested in heat output and bulk energy exchange. Microphysical considerations of molecular bonding and activation energy suggest that the apparent partitioning of surface energy between phases goes as the viscosity of the phases. When such partitioning is used in the two-phase theory, it captures the melt-compaction theory of McKenzie (1984, J. Petrol.,25, 713-765) exactly, as well as the void-damage theory proposed in a companion paper (Ricard & Bercovici, submitted). Calculations of 1-D shear localization with this variation of the theory still show at least three possible regimes of damage and localization: at low stress is weak localization with diffuse slowly evolving shear bands; at higher stress strong localization with narrow rapidly growing bands exists; and at yet higher shear stress it is possible for the system to undergo broadly distributed damage and no localization. However, the intensity of localization is strongly controlled by the variability of the deformational-work partitioning with dilation rate, represented by the parameter γ. For γ>> 1, extreme localization is allowed, with sharp profiles in porosity (weak zones), nearly discontinuous separation velocities and effectively singular dilation rates. Finally, the bulk heat output is examined for the 1-D system to discern how much deformational work is effectively stored as surface energy. In the high-stress, distributed-damage cases, heat output is reduced as more interfacial surface energy is created. Yet, in either the weak or strong localizing cases, the system always releases surface energy, regardless of the presence of damage or not, and thus slightly more heat is in fact released than energy is input through external work. Moreover, increased levels of damage (represented by the maximum work-partitioning f*) make the localizing system release surface energy faster as damage enhances phase separation and focusing of the porosity field, thus yielding more rapid loss of net interfacial surface area. However, when cases with different levels of damage are compared at similar stages of development (say, the peak porosity of the localization) it is apparent that increased damage causes smaller relative heat release and retards loss of net interfacial surface energy. The energetics and energy partitioning of this damage and shear-localization model are applied to estimating the energy costs of forming plate boundaries and generating plates from mantle convection.

A Comparison of Affect Ratings Obtained with Ecological Momentary Assessment and the Day Reconstruction Method

PubMed Central

Dockray, Samantha; Grant, Nina; Stone, Arthur A.; Kahneman, Daniel; Wardle, Jane

2010-01-01

Measurement of affective states in everyday life is of fundamental importance in many types of quality of life, health, and psychological research. Ecological momentary assessment (EMA) is the recognized method of choice, but the respondent burden can be high. The day reconstruction method (DRM) was developed by Kahneman and colleagues (Science, 2004, 306, 1776–1780) to assess affect, activities and time use in everyday life. We sought to validate DRM affect ratings by comparison with contemporaneous EMA ratings in a sample of 94 working women monitored over work and leisure days. Six EMA ratings of happiness, tiredness, stress, and anger/frustration were obtained over each 24 h period, and were compared with DRM ratings for the same hour, recorded retrospectively at the end of the day. Similar profiles of affect intensity were recorded with the two techniques. The between-person correlations adjusted for attenuation ranged from 0.58 (stress, working day) to 0.90 (happiness, leisure day). The strength of associations was not related to age, educational attainment, or depressed mood. We conclude that the DRM provides reasonably reliable estimates both of the intensity of affect and variations in affect over the day, so is a valuable instrument for the measurement of everyday experience in health and social research. PMID:21113328

Design and strength analysis of a fertilizing and soil covering vehicle

NASA Astrophysics Data System (ADS)

Sun, Heng-Hui; Zhang, Zheng-Yong; Liu, Yang; Zhu, Li-Kai; Chen, En-Wei

2018-03-01

In this paper, a kind of fertilizing and soil covering vehicle is designed with compact structure, easy control and substituting manual work to conduct the operations including fertilizing and soil covering. In accordance with movement, structure and loading feature of fertilizing and soil covering vehicle, parametric modeling is carried out for the frame part of this fertilizing and soil covering vehicle to define boundary conditions such as load, constraint, etc. when the frame is under the working condition of normal full load. ANSYS software is used to produce finite element model of frame, and to analyze and solve the model, so as to obtain stress and stain variation diagram of each part of frame under working condition of normal full load. The calculation result shows that: the structure of frame is able to meet the strength requirement, and the maximum value of stress is located at joint between frame and external hinge, which should be appropriately improved in thickening way. In addition, a larger deformation occurring at damper on lower part of hopper may be reduced by adding rib plate at damper on lower part of hopper. The research result of this paper provides the theoretical basis for the design of frame of fertilizing and soil covering vehicle, which has deep theoretical significance and application value.

Stressful environments induce novel phenotypic variation: hierarchical reaction norms for sperm performance of a pervasive invader

PubMed Central

Purchase, Craig F; Moreau, Darek T R

2012-01-01

Genetic variation for phenotypic plasticity is ubiquitous and important. However, the scale of such variation including the relative variability present in reaction norms among different hierarchies of biological organization (e.g., individuals, populations, and closely related species) is unknown. Complicating interpretation is a trade-off in environmental scale. As plasticity can only be inferred over the range of environments tested, experiments focusing on fine tuned responses to normal or benign conditions may miss cryptic phenotypic variation expressed under novel or stressful environments. Here, we sought to discern the presence and shape of plasticity in the performance of brown trout sperm as a function of optimal to extremely stressful river pH, and demarcate if the reaction norm varies among genotypes. Our overarching goal was to determine if deteriorating environmental quality increases expressed variation among individuals. A more applied aim was to ascertain whether maintaining sperm performance over a wide pH range could help explain how brown trout are able to invade diverse river systems when transplanted outside of their native range. Individuals differed in their reaction norms of phenotypic expression of an important trait in response to environmental change. Cryptic variation was revealed under stressful conditions, evidenced through increasing among-individual variability. Importantly, data on population averages masked this variability in plasticity. In addition, canalized reaction norms in sperm swimming velocities of many individuals over a very large range in water chemistry may help explain why brown trout are able to colonize a wide variety of habitats. PMID:23145341

Work stress and cardiovascular disease: a life course perspective.

PubMed

Li, Jian; Loerbroks, Adrian; Bosma, Hans; Angerer, Peter

2016-05-25

Individuals in employment experience stress at work, and numerous epidemiological studies have documented its negative health effects, particularly on cardiovascular disease (CVD). Although evidence on the various interrelationships between work stress and CVD has been accumulated, those observations have not yet been conceptualized in terms of a life course perspective. Using the chain of risk model, we would like to propose a theoretical model incorporating six steps: (1) work stress increases the risk of incident CVD in healthy workers. (2) Among those whose work ability is not fully and permanently damaged, work stress acts as a determinant of the process of return to work after CVD onset. (3) CVD patients experience higher work stress after return to work. (4) Work stress increases the risk of recurrent CVD in workers with prior CVD. (5) CVD patients who fully lose their work ability transit to disability retirement. (6) Disability retirees due to CVD have an elevated risk of CVD mortality. The life course perspective might facilitate an in-depth understanding of the diverse interrelationships between work stress and CVD, thereby leading to work stress management interventions at each period of the lifespan and three-level prevention of CVD.

Nicotine and oxidative stress induced exomic variations are concordant and overrepresented in cancer-associated genes

PubMed Central

Bavarva, Jasmin H.; Tae, Hongseok; McIver, Lauren; Garner, Harold R.

2014-01-01

Although the connection between cancer and cigarette smoke is well established, nicotine is not characterized as a carcinogen. Here, we used exome sequencing to identify nicotine and oxidative stress-induced somatic mutations in normal human epithelial cells and its correlation with cancer. We identified over 6,400 SNVs, indels and microsatellites in each of the stress exposed cells relative to the control, of which, 2,159 were consistently observed at all nicotine doses. These included 429 nsSNVs including 158 novel and 79 cancer-associated. Over 80% of consistently nicotine induced variants overlap with variations detected in oxidative stressed cells, indicating that nicotine induced genomic alterations could be mediated through oxidative stress. Nicotine induced mutations were distributed across 1,585 genes, of which 49% were associated with cancer. MUC family genes were among the top mutated genes. Analysis of 591 lung carcinoma tumor exomes from The Cancer Genome Atlas (TCGA) revealed that 20% of non-small-cell lung cancer tumors in smokers have mutations in at least one of the MUC4, MUC6 or MUC12 genes in contrast to only 6% in non-smokers. These results indicate that nicotine induces genomic variations, promotes instability potentially mediated by oxidative stress, implicating nicotine in carcinogenesis, and establishes MUC genes as potential targets. PMID:24947164

Weekly Rhythms of Parents' Work Stress, Home Stress, and Parent-Adolescent Tension.

ERIC Educational Resources Information Center

Almeida, David M.; McDonald, Daniel

1998-01-01

Examined relationships between weekly rhythms of work and family stress and parent-adolescent tension. Found that parent-adolescent tension was most likely to occur on Sundays and Mondays, because parental work stress was more frequent at the beginning of the work week and home stress happened most on the weekend. Mothers' work and home stress…

The behavioral ecology of cultural psychological variation.

PubMed

Sng, Oliver; Neuberg, Steven L; Varnum, Michael E W; Kenrick, Douglas T

2018-04-23

Recent work has documented a wide range of important psychological differences across societies. Multiple explanations have been offered for why such differences exist, including historical philosophies, subsistence methods, social mobility, social class, climactic stresses, and religion. With the growing body of theory and data, there is an emerging need for an organizing framework. We propose here that a behavioral ecological perspective, particularly the idea of adaptive phenotypic plasticity, can provide an overarching framework for thinking about psychological variation across cultures and societies. We focus on how societies vary as a function of six important ecological dimensions: density, relatedness, sex ratio, mortality likelihood, resources, and disease. This framework can: (a) highlight new areas of research, (b) integrate and ground existing cultural psychological explanations, (c) integrate research on variation across human societies with research on parallel variations in other animal species, (d) provide a way for thinking about multiple levels of culture and cultural change, and (e) facilitate the creation of an ecological taxonomy of societies, from which one can derive specific predictions about cultural differences and similarities. Finally, we discuss the relationships between the current framework and existing perspectives. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Job satisfaction or production? How staff and leadership understand operating room efficiency: a qualitative study.

PubMed

Arakelian, E; Gunningberg, L; Larsson, J

2008-11-01

How to increase efficiency in operating departments has been widely studied. However, there is no overall definition of efficiency. Supervisors urging staff to work efficiently may meet strong reactions due to staff believing that demands for efficiency means just stress at work. Differences in how efficiency is understood may constitute an obstacle to supervisors' efforts to promote it. This study aimed to explore how staff and leadership understand operating room efficiency. Twenty-one members of staff and supervisors in an operating department in a Swedish county hospital were interviewed. The analysis was performed with a phenomenographic approach that aims to discover the variations in how a phenomenon is understood by a group of people. Six categories were found in the understanding of operation room efficiency: (A) having the right qualifications; (B) enjoying work; (C) planning and having good control and overview; (D) each professional performing the correct tasks; (E) completing a work assignment; and (F) producing as much as possible per time unit. The most significant finding was that most of the nurses and assistant nurses understood efficiency as individual knowledge and experience emphasizing the importance of the work process, whereas the supervisors and physicians understood efficiency in terms of production per time unit or completing an assignment. The concept 'operating room efficiency' is understood in different ways by leadership and staff members. Supervisors who are aware of this variation will have better prerequisites for defining the concept and for creating a common platform towards becoming efficient.

Job stress, depression, work performance, and perceptions of supervisors in military personnel.

PubMed

Pflanz, Steven E; Ogle, Alan D

2006-09-01

Recent studies have identified high levels of job stress in military personnel. This study examined the relationship among job stress, depression, work performance, types of stressors, and perceptions about supervisors in military personnel. Eight hundred nine military personnel answered a 43-item survey on work stress, physical and emotional health, work performance, perceptions about leadership, job stressors, and demographics. More than one- quarter (27.4%) of this military population reported suffering from significant job stress. Both the report of work stress and depression were significantly related to impaired work performance, more days of missed work, poorer physical health, and negative perceptions about the abilities of supervisors and commanders. Depression and job stress were significantly and positively related to each other. These results support accumulating data indicating that work stress is a significant occupational health hazard in the routine military work environment. Targeting and eliminating sources of job stress should be a priority for the U.S. military to preserve and protect the mental health of military personnel.

Mechanical properties characterization of polymethyl methacrylate polymer optical fibers after thermal and chemical treatments

NASA Astrophysics Data System (ADS)

Leal-Junior, Arnaldo; Frizera, Anselmo; Marques, Carlos; Pontes, Maria José

2018-07-01

This paper presents the dynamic mechanical analysis (DMA) in polymer optical fibers (POFs) made of Polymethyl Methacrylate (PMMA) that were submitted to different thermal and chemical treatments, namely annealing and etching processes. The prepared samples were submitted to stress-strain cycles to evaluate the Young's modulus of each fiber. Also, test with constant stress and temperature variation were performed to estimate the thermal expansion coefficient of the fibers submitted to each thermal and chemical treatment. The samples were also tested under different temperature, humidity and strain cycle frequency conditions to analyze the variation of their mechanical properties with these parameters. Results show that the thermal and chemical treatments lead to a reduction of Young's modulus and an increase of the thermal expansion coefficient, which can produce sensors based on intensity variation or fiber Bragg grating with higher dynamic range, stress and temperature sensitivity. Furthermore, the etching and annealing resulted in fiber that presents lower Young's modulus variation with temperature, humidity and strain cycling frequency in most cases. However, the annealing made under water and the combinations of etching and annealing resulted in POFs with higher modulus variation with humidity, which enable their application as intensity variation or FBG-based sensors in humidity/moisture assessment.

Parenting stress and salivary cortisol in parents of children with autism spectrum disorder: Longitudinal variations in the context of a service dog's presence in the family.

PubMed

Fecteau, Stéphanie-M; Boivin, Louise; Trudel, Marcel; Corbett, Blythe A; Harrell, Frank E; Viau, Robert; Champagne, Noël; Picard, Frédéric

2017-02-01

A significant portion of parents of children with autism spectrum disorder report high levels of stress related to parenting responsibilities, which have been linked to abnormal cortisol patterns. This study seeks to better understand the parents' adaptation to caregiving demands and use of a service dog, by taking into account longitudinal variations in salivary cortisol and perception of parental stress. Salivary cortisol was collected one day per week for 15 weeks by 98 primary caregivers of children with ASD. Overall, parents perceived high levels of stress at baseline. Mean morning cortisol increase was below expected levels for healthy adults, and perception of stress predicted morning cortisol activity. Hypocorticolism related to chronic stress may be present in parents of children with ASD. Longitudinal analysis revealed that the presence of a service dog in the family had an effect on parenting stress, wakening and morning cortisol levels. Copyright © 2016 Elsevier B.V. All rights reserved.

Stress Field Variation after the 2001 Skyros Earthquake, Greece, Derived from Seismicity Rate Changes

NASA Astrophysics Data System (ADS)

Leptokaropoulos, K.; Papadimitriou, E.; Orlecka-Sikora, B.; Karakostas, V.

2012-04-01

The spatial variation of the stress field (ΔCFF) after the 2001 strong (Mw=6.4) Skyros earthquake in North Aegean Sea, Greece, is investigated in association with the changes of earthquake production rates. A detailed slip model is considered in which the causative fault is consisted of several sub-faults with different coseismic slip onto each one of them. First the spatial distribution of aftershock productivity is compared with the static stress changes due to the coseismic slip. Calculations of ΔCFF are performed at different depths inside the seismogenic layer, defined from the vertical distribution of the aftershocks. Seismicity rates of the smaller magnitude events with M≥Mc for different time increments before and after the main shock are then derived from the application of a Probability Density Function (PDF). These rates are computed by spatially smoothing the seismicity and for this purpose a normal grid of rectangular cells is superimposed onto the area and the PDF determines seismicity rate values at the center of each cell. The differences between the earthquake occurrence rates before and after the main shock are compared and used as input data in a stress inversion algorithm based upon the Rate/State dependent friction concept in order to provide an independent estimation of stress changes. This model incorporates the physical properties of the fault zones (characteristic relaxation time, fault constitutive parameters, effective friction coefficient) with a probabilistic estimation of the spatial distribution of seismicity rates, derived from the application of the PDF. The stress patterns derived from the previously mentioned approaches are compared and the quantitative correlation between the respective results is accomplished by the evaluation of Pearson linear correlation coefficient and its confidence intervals to quantify their significance. Different assumptions and combinations of the physical and statistical parameters are tested for the model performance and robustness to be evaluated. Simulations will provide a measure of how robust is the use of seismicity rate changes as a stress meter for both positive and negative stress steps. This work was partially prepared within the framework of the research projects No. N N307234937 and 3935/B/T02/2010/39 financed by the Ministry of Education and Science of Poland during the period 2009 to 2011 and 2010 to 2012, respectively.

Work-related stress, associated comorbidities and stress causes in French community pharmacies: a nationwide cross-sectional study

PubMed Central

Pereira, Bruno; Virot, Julie; Lambert, Céline; Collin, Aurore; Alapini, David; Gagnaire, Jean-Marc; Authier, Nicolas; Cuny, Damien; Vennat, Brigitte

2017-01-01

Background Like other health professionals, community pharmacists are exposed to stress factors (being efficient, avoiding mistakes and bearing emotional load), but they are also under the pressure of entrepreneurial responsibilities. The main objective was to assess the level of work-related stress in French community pharmacies. The other objectives of the study were to assess the associated comorbidities and causes of work-related stress. Methods This observational cross-sectional study was sent to all French community pharmacies by email. The survey was anonymous and designed to collect the following items: socio-demographic factors, professional status, characteristics of community pharmacy, work-related stress (visual analogic scale—VAS), fatigue (VAS), sleep disturbances (questions), anxiety and depression symptoms (hospital anxiety and depression scale), medical consultation for work-related stress, medication use for work related stress, psychoactive drug-use and causes of work-related stress. Participants were included in the survey if they were pharmacists (owner or assistant) or pharmacy technicians working in a community pharmacy at the time of the survey. Exclusion criteria were defined as follows: pharmacy students or other professionals involved in a community pharmacy (e.g. dietician, beautician) and lack of professional status information. There was no age limitation. Results After three months of data collection, 1,339 participants answered the survey and 1,272 participants were included in conformity with the inclusion and exclusion criteria, and to avoid missing data on the primary endpoint. Work-related stress was detected in 32.8% (417/1,272) of individuals (scores ≥70/100). Men were significantly more affected than women and there was no difference between professional statuses and no relation with the age of the participants. Work-related stress was significantly associated with anxiety, depression, fatigue, sleep disturbances, medical consultations, medication use, alcohol consumption above the WHO recommendations for men and psychoactive drug use. Three causes of stress were clearly identified and related to stress levels, workload, working atmosphere and deterioration of work quality. However, causes of work-related stress were significantly different among professionals, for example: entrepreneurial burden for pharmacists-in-charge and workload for employees (assistant pharmacists and pharmacy technicians). Discussion Work-related stress has a very strong impact in French community pharmacies. This stress was associated with several comorbidities and induces health resource consumption. Several causes of work-related stress have been identified such as workload, working atmosphere and deterioration of work quality; however, these causes could be detected and managed to improve stress levels. We recommend developing individual and organizational stress management in French community pharmacies. PMID:29085764

Work-related stress, associated comorbidities and stress causes in French community pharmacies: a nationwide cross-sectional study.

PubMed

Balayssac, David; Pereira, Bruno; Virot, Julie; Lambert, Céline; Collin, Aurore; Alapini, David; Gagnaire, Jean-Marc; Authier, Nicolas; Cuny, Damien; Vennat, Brigitte

2017-01-01

Like other health professionals, community pharmacists are exposed to stress factors (being efficient, avoiding mistakes and bearing emotional load), but they are also under the pressure of entrepreneurial responsibilities. The main objective was to assess the level of work-related stress in French community pharmacies. The other objectives of the study were to assess the associated comorbidities and causes of work-related stress. This observational cross-sectional study was sent to all French community pharmacies by email. The survey was anonymous and designed to collect the following items: socio-demographic factors, professional status, characteristics of community pharmacy, work-related stress (visual analogic scale-VAS), fatigue (VAS), sleep disturbances (questions), anxiety and depression symptoms (hospital anxiety and depression scale), medical consultation for work-related stress, medication use for work related stress, psychoactive drug-use and causes of work-related stress. Participants were included in the survey if they were pharmacists (owner or assistant) or pharmacy technicians working in a community pharmacy at the time of the survey. Exclusion criteria were defined as follows: pharmacy students or other professionals involved in a community pharmacy (e.g. dietician, beautician) and lack of professional status information. There was no age limitation. After three months of data collection, 1,339 participants answered the survey and 1,272 participants were included in conformity with the inclusion and exclusion criteria, and to avoid missing data on the primary endpoint. Work-related stress was detected in 32.8% (417/1,272) of individuals (scores ≥70/100). Men were significantly more affected than women and there was no difference between professional statuses and no relation with the age of the participants. Work-related stress was significantly associated with anxiety, depression, fatigue, sleep disturbances, medical consultations, medication use, alcohol consumption above the WHO recommendations for men and psychoactive drug use. Three causes of stress were clearly identified and related to stress levels, workload, working atmosphere and deterioration of work quality. However, causes of work-related stress were significantly different among professionals, for example: entrepreneurial burden for pharmacists-in-charge and workload for employees (assistant pharmacists and pharmacy technicians). Work-related stress has a very strong impact in French community pharmacies. This stress was associated with several comorbidities and induces health resource consumption. Several causes of work-related stress have been identified such as workload, working atmosphere and deterioration of work quality; however, these causes could be detected and managed to improve stress levels. We recommend developing individual and organizational stress management in French community pharmacies.

Job insecurity during recessions: effects on survivors' work stress.

PubMed

Modrek, Sepideh; Cullen, Mark R

2013-10-06

Previous studies show a variety of negative health consequences for the remaining workforce after downsizing events. This study examined self-reported work stress from 2009-2012 in the context of a large multi-site aluminum manufacturing company that underwent severe downsizing in 2009. This study examined the association between work stress and working at a work site that underwent severe downsizing. We assessed the level of downsizing across thirty plants in 2009 and categorized seven as having undergone severe downsizing. We linked plant-level downsizing information to individual workers' responses to an annual work engagement survey, which included three work stress questions. From 2009 to 2012 over 14, 000 employees were asked about their experience of work stress. Though the surveys were anonymous, the surveys captured employees' demographic and employment characteristic as well as plant location. We used hierarchical logistic regressions to compare responses of workers at severely downsized plants to workers at all other plant while controlling for demographic and plant characteristics. Responses to the work stress questions and one control question were examined. In all yearly surveys salaried workers consistently reported having more work stress than hourly workers. There was no differential in work stress for workers at severely downsized plants in 2009. In 2010 to 2012, salaried workers who remained at severely downsized plants reported significantly higher work stress than salaried workers at all other plants across multiple work stress questions. Examination of the 2006 survey confirmed that there were no pre-existing differences in work stress among salaried employees working at plants that would eventually experience severe downsizing. In addition, there was no difference in responses to the control question at severely downsized plants. Salaried workers at plants with high layoffs experienced more work stress after 2009 than their counterparts at non-high layoff plants. Increased work stress is important to monitor and may be a mediating pathway through which the external economic environment leads to adverse health outcomes.

The relationship of work stress and family stress to the self-rated health of women employed in the industrial sector in Korea.

PubMed

Kim, Gwang Suk; Cho, Won Jung; Lee, Chung Yul; Marion, Lucy N; Kim, Mi Ja

2005-01-01

To identify the relationship of work stress and family stress to the health of women in Korea. Cross-sectional study. Three hundred and thirty-one married women working in 14 manufacturing companies in Korea. Subjects responded to a questionnaire that included items on work stress, family stress, social support, and general characteristics. Perceived health status (PHS) was assessed with the Short Form-36. There was a significant positive relationship between social support and PHS, but significant negative relationships were found between PHS and work stress as well as family stress. Hierarchical multiple regression analysis explained the health status of married working women by four categories: personal, work related, family related, and social support, and accounted for 45.4% of the variance. When family-related factors were added to the model, the power of explanation was increased by 17.9% compared with the explained variance. Family stress was a major variable not only for explaining the variance but also for correlating with health status. Both work stress and family stress should be considered together when addressing the health of working women in the industrial sector in Korea.

Constitutive differences in glucocorticoid responsiveness to stress are related to variation in aggression and anxiety-related behaviors.

PubMed

Walker, Sophie E; Zanoletti, Olivia; Guillot de Suduiraut, Isabelle; Sandi, Carmen

2017-10-01

Glucocorticoids coordinate responses that enable an individual to cope with stressful challenges and, additionally, mediate adaptation following cessation of a stressor. There are important individual differences in the magnitude of glucocorticoid responsiveness to stressors. However, whether individual differences in glucocorticoid responsiveness to stress are linked to different behavioral strategies in coping with social and non-social challenges is not easily studied, owing to the lack of appropriate animal models. To address this, we generated three lines of Wistar rats selectively bred for the magnitude of their glucocorticoid responses following exposure to a variety of stressors over three consecutive days at juvenility. Here, we present findings following observations of a high level of variation in glucocorticoid responsiveness to stress in outbred Wistar rats, and the strong response to selection for this trait over a few generations. When challenged with different stressful challenges, rats from the three lines differed in their coping behaviors. Strikingly, the line with high glucocorticoid responsiveness to stress displayed enhanced aggression and anxiety-like behaviors. In addition, these rats also showed alterations in the expression of genes within both central and peripheral nodes of the hypothalamic-pituitary-adrenal (HPA) axis and enhanced reactivity to acute stress exposure. Together, these findings strongly link differences in glucocorticoid responsiveness to stress with marked differences in coping styles. The developed rat lines are thus a promising model with which to examine the relationship between variation in reactivity of the HPA axis and stress-related pathophysiology and could be employed to assess the therapeutic potential of treatments modulating stress habituation to ameliorate psychopathology. Copyright © 2017 Elsevier Ltd. All rights reserved.

Nurses' work-related stress in China: a comparison between psychiatric and general hospitals.

PubMed

Qi, Yun-Ke; Xiang, Yu-Tao; An, Feng-Rong; Wang, Jing; Zeng, Jiao-Ying; Ungvari, Gabor S; Newhouse, Robin; Yu, Doris S F; Lai, Kelly Y C; Ding, Yan-Ming; Yu, Liuyang; Zhang, Xiang-Yang; Chiu, Helen F K

2014-01-01

Little is known about the level of work-related stress in nurses in China.This study compared the level of work-related stress between female nurses working in psychiatric and general hospitals in China. A descriptive comparative cross-sectional design was used.A consecutive sample of nurses from two psychiatric hospitals (N = 297) and a medical unit (N = 408) of a general hospital completed a written survey including socio-demographic data and a measure of work-related stress (Nurse Stress Inventory). Compared to the nurses working in the general hospital, those working in the psychiatric setting had a higher level of stress in the domains of working environment and resources (p < .001) and patient care (p < .001), but lower workload and time (p < .001).Multivariate analyses revealed that college or higher level of education(b = .1, p < .001), exposure to violence in the past 6 months (b = .2, p < .001),longer working experience, and working in psychiatric hospitals were associated with high work-related stress (b = .2, p < .001). Considering the harmful effects of work-related stress, specific stress management workshops and effective staff supportive initiatives for Chinese nurses are warranted.

A model for seasonal changes in GPS positions and seismic wave speeds due to thermoelastic and hydrologic variations

USGS Publications Warehouse

Tsai, V.C.

2011-01-01

It is known that GPS time series contain a seasonal variation that is not due to tectonic motions, and it has recently been shown that crustal seismic velocities may also vary seasonally. In order to explain these changes, a number of hypotheses have been given, among which thermoelastic and hydrology-induced stresses and strains are leading candidates. Unfortunately, though, since a general framework does not exist for understanding such seasonal variations, it is currently not possible to quickly evaluate the plausibility of these hypotheses. To fill this gap in the literature, I generalize a two-dimensional thermoelastic strain model to provide an analytic solution for the displacements and wave speed changes due to either thermoelastic stresses or hydrologic loading, which consists of poroelastic stresses and purely elastic stresses. The thermoelastic model assumes a periodic surface temperature, and the hydrologic models similarly assume a periodic near-surface water load. Since all three models are two-dimensional and periodic, they are expected to only approximate any realistic scenario; but the models nonetheless provide a quantitative framework for estimating the effects of thermoelastic and hydrologic variations. Quantitative comparison between the models and observations is further complicated by the large uncertainty in some of the relevant parameters. Despite this uncertainty, though, I find that maximum realistic thermoelastic effects are unlikely to explain a large fraction of the observed annual variation in a typical GPS displacement time series or of the observed annual variations in seismic wave speeds in southern California. Hydrologic loading, on the other hand, may be able to explain a larger fraction of both the annual variations in displacements and seismic wave speeds. Neither model is likely to explain all of the seismic wave speed variations inferred from observations. However, more definitive conclusions cannot be made until the model parameters are better constrained. Copyright ?? 2011 by the American Geophysical Union.

A principle of organization which facilitates broad Lamarckian-like adaptations by improvisation.

PubMed

Soen, Yoav; Knafo, Maor; Elgart, Michael

2015-12-02

During the lifetime of an organism, every individual encounters many combinations of diverse changes in the somatic genome, epigenome and microbiome. This gives rise to many novel combinations of internal failures which are unique to each individual. How any individual can tolerate this high load of new, individual-specific scenarios of failure is not clear. While stress-induced plasticity and hidden variation have been proposed as potential mechanisms of tolerance, the main conceptual problem remains unaddressed, namely: how largely non-beneficial random variation can be rapidly and safely organized into net benefits to every individual. We propose an organizational principle which explains how every individual can alleviate a high load of novel stressful scenarios using many random variations in flexible and inherently less harmful traits. Random changes which happen to reduce stress, benefit the organism and decrease the drive for additional changes. This adaptation (termed 'Adaptive Improvisation') can be further enhanced, propagated, stabilized and memorized when beneficial changes reinforce themselves by auto-regulatory mechanisms. This principle implicates stress not only in driving diverse variations in cells tissues and organs, but also in organizing these variations into adaptive outcomes. Specific (but not exclusive) examples include stress reduction by rapid exchange of mobile genetic elements (or exosomes) in unicellular, and rapid changes in the symbiotic microorganisms of animals. In all cases, adaptive changes can be transmitted across generations, allowing rapid improvement and assimilation in a few generations. We provide testable predictions derived from the hypothesis. The hypothesis raises a critical, but thus far overlooked adaptation problem and explains how random variation can self-organize to confer a wide range of individual-specific adaptations beyond the existing outcomes of natural selection. It portrays gene regulation as an inseparable synergy between natural selection and adaptation by improvisation. The latter provides a basis for Lamarckian adaptation that is not limited to a specific mechanism and readily accounts for the remarkable resistance of tumors to treatment.

Work-related stress management by Finnish enterprises.

PubMed

Kinnunen-Amoroso, Maritta; Liira, Juha

2014-01-01

Work-related stress has become one of the major problems in working societies and it increases employees' risk of disease. Its importance has been emphasized also due to its' great socio-economic consequences. Different stress management and worksite interventions have been implemented, however, the actual practices in companies have been assessed little. The purpose of this study was to examine how enterprises in Finland manage work-related stress. An assessment of work-related stress methods was conducted in 40 enterprises acting in the metropolitan area of Finland in May 2010 by a questionnaire. The concept of work-related stress was well known by participants. Enterprises rarely had their own work-related stress management protocol even though all of the workplaces had experienced work-related stress at some point. The collaboration between the workplace and occupational health services varied. Companies easily placed the responsibility for work-related stress assessment and handling on occupational health services. Workplaces have to pay more attention to work-related stress and related issues. The easiest way to do this is to collaborate with occupational health services. Protocols for collaboration should be developed jointly using the available models which have been established as cost-effective.

Work and family stress is associated with menstrual disorders but not with fibrocystic changes: cross-sectional findings in Chinese working women.

PubMed

Zhou, Mei; Wege, Natalia; Gu, Huakang; Shang, Li; Li, Jian; Siegrist, Johannes

2010-01-01

To explore the separate and combined effects of work and family stress on menstrual disorders and fibrocystic changes in Chinese working women. Data were obtained from a cross-sectional study of 1,642 female railway workers. The Effort-Reward Imbalance Questionnaire and Family Stress Scale were used to measure work stress and family stress, respectively; the menstrual and breast conditions were evaluated by gynecologic interview and a medical examination. Multivariate log-binomial regression was performed to analyze the associations. Menstrual disorders were found in 59.3% of female workers, and 54.8% had fibrocystic changes. The risk of menstrual disorders was significantly elevated with respect to work and family stress. The highest risk was found in the group with combined exposure to both work and family stress (RR with 95% CI 1.33 (1.18-1.49)). No significant association between stress and fibrocystic changes was observed. Menstrual disorders were associated with stress from work and family life, but not fibrocystic changes, in working women. Tailored intervention measures reducing the burden of stressful psychosocial work and family environment are needed to improve women's reproductive well-being.

Stress analysis on passenger deck due to modification from passenger ship to vehicle-carrying ship

NASA Astrophysics Data System (ADS)

Zubaydi, A.; Sujiatanti, S. H.; Hariyanto, T. R.

2018-03-01

Stress is a basic concept in learning about material mechanism. The main focus that needs to be brought to attention in analyzing stress is strength, which is the structural capacity to carry or distribute loads. The structural capacity not only measured by comparing the maximum stress with the material’s yield strength but also with the permissible stress required by the Indonesian Classification Bureau (BKI), which certainly makes it much safer. This final project analyzes stress in passenger deck that experiences modification due to load changes, from passenger load to vehicle one, carrying: 6-wheels truck with maximum weight of 14 tons, a passenger car with maximum weight of 3.5 tons, and a motorcycle with maximum weight of 0.4 tons. The deck structure is modelled using finite element software. The boundary conditions given to the structural model are fix and simple constraint. The load that works on this deck is the deck load which comes from the vehicles on deck with three vehicles’ arrangement plans. After that, software modelling is conducted for analysis purpose. Analysis result shows a variation of maximum stress that occurs i.e. 135 N/mm2, 133 N/mm2, and 152 N/mm2. Those maximum stresses will not affect the structure of passenger deck’s because the maximum stress that occurs indicates smaller value compared to the Indonesian Classification Bureau’s permissible stress (175 N/mm2) as well as the material’s yield strength (235 N/mm2). Thus, the structural strength of passenger deck is shown to be capable of carrying the weight of vehicles in accordance with the three vehicles’ arrangement plans.

Stress Prevention@Work: a study protocol for the evaluation of a multifaceted integral stress prevention strategy to prevent employee stress in a healthcare organization: a cluster controlled trial.

PubMed

Hoek, Rianne J A; Havermans, Bo M; Houtman, Irene L D; Brouwers, Evelien P M; Heerkens, Yvonne F; Zijlstra-Vlasveld, Moniek C; Anema, Johannes R; van der Beek, Allard J; Boot, Cécile R L

2017-07-17

Adequate implementation of work-related stress management interventions can reduce or prevent work-related stress and sick leave in organizations. We developed a multifaceted integral stress-prevention strategy for organizations from several sectors that includes a digital platform and collaborative learning network. The digital platform contains a stepwise protocol to implement work-related stress-management interventions. It includes stress screeners, interventions and intervention providers to facilitate access to and the selection of matching work-related stress-management interventions. The collaborative learning network, including stakeholders from various organizations, plans meetings focussing on an exchange of experiences and good practices among organizations for the implementation of stress prevention measures. This paper describes the design of an integral stress-prevention strategy, Stress Prevention@Work, and the protocol for the evaluation of: 1) the effects of the strategy on perceived stress and work-related outcomes, and 2) the barriers and facilitators for implementation of the strategy. The effectiveness of Stress Prevention@Work will be evaluated in a cluster controlled trial, in a large healthcare organization in the Netherlands, at six and 12 months. An independent researcher will match teams on working conditions and size and allocate the teams to the intervention or control group. Teams in the intervention group will be offered Stress Prevention@Work. For each intervention team, one employee is responsible for applying the strategy within his/her team using the digital platform and visiting the collaborative learning network. Using a waiting list design, the control group will be given access to the strategy after 12 months. The primary outcome is the employees' perceived stress measured by the stress subscale of the Depression, Anxiety, and Stress Scale (DASS-21). Secondary outcome measures are job demands, job resources and the number of preventive stress measures implemented at the team level. Alongside the trial, a process evaluation, including barriers and facilitators of the implementation of Stress Prevention@Work, will be conducted in one healthcare organisation. If Stress Prevention@Work is found to be effective in one healthcare organisation, further implementation on a broader scale might lead to increased productivity and decreased stress and sick leave in other organizations. Results are expected in 2018. NTR5527 . Registered 7 Dec 2015.

Tube Bulge Process : Theoretical Analysis and Finite Element Simulations

NASA Astrophysics Data System (ADS)

Velasco, Raphael; Boudeau, Nathalie

2007-05-01

This paper is focused on the determination of mechanics characteristics for tubular materials, using tube bulge process. A comparative study is made between two different models: theoretical model and finite element analysis. The theoretical model is completely developed, based first on a geometrical analysis of the tube profile during bulging, which is assumed to strain in arc of circles. Strain and stress analysis complete the theoretical model, which allows to evaluate tube thickness and state of stress, at any point of the free bulge region. Free bulging of a 304L stainless steel is simulated using Ls-Dyna 970. To validate FE simulations approach, a comparison between theoretical and finite elements models is led on several parameters such as: thickness variation at the free bulge region pole with bulge height, tube thickness variation with z axial coordinate, and von Mises stress variation with plastic strain. Finally, the influence of geometrical parameters deviations on flow stress curve is observed using analytical model: deviations of the tube outer diameter, its initial thickness and the bulge height measurement are taken into account to obtain a resulting error on plastic strain and von Mises stress.

A real-time assessment of work stress in physicians and nurses.

PubMed

Rutledge, Thomas; Stucky, Erin; Dollarhide, Adrian; Shively, Martha; Jain, Sonia; Wolfson, Tanya; Weinger, Matthew B; Dresselhaus, Timothy

2009-03-01

This study adapted ecological momentary assessment methods to: (a) examine differences in work stress between nurses and physicians, and (b) to study relationships between work stress, work activity patterns, and sleep. A total of 185 physicians and 119 nurses (206 women, 98 men) working in four teaching hospitals participated in an observational study of work stress. Participants carried handheld computers that randomly prompted them for work activity, patient load, and work stress information. Participants completed more than 9,500 random interval surveys during the study (an average of 30.8 surveys per person-week). Approximately 85% of all surveys were completed in full (73.3%) or partially (11.6%). Emotional stress scores among physicians were nearly 50% higher (26.9[19.0]) than those of nurses (18.1[14.9], r[302] = .37, p < .001). Direct and indirect care activities were associated with higher stress reports by both clinician groups (rs[159] = .14-.26, ps < .01). Sleep quality and quantity were predictors of work stress scores (ps < .05). Finally, higher work stress and lower sleep quality were also associated with poorer memory performance (r[302] = -.12, .17, ps < 05). The findings identify patterns of work stress in relationship to work activities, sleep habits, and provider differences that may be used to assist ongoing hospital work reform efforts. (c) 2009 APA, all rights reserved

Heat resistance throughout ontogeny: body size constrains thermal tolerance.

PubMed

Klockmann, Michael; Günter, Franziska; Fischer, Klaus

2017-02-01

Heat tolerance is a trait of paramount ecological importance and may determine a species' ability to cope with ongoing climate change. Although critical thermal limits have consequently received substantial attention in recent years, their potential variation throughout ontogeny remained largely neglected. We investigate whether such neglect may bias conclusions regarding a species' sensitivity to climate change. Using a tropical butterfly, we found that developmental stages clearly differed in heat tolerance. It was highest in pupae followed by larvae, adults and finally eggs and hatchlings. Strikingly, most of the variation found in thermal tolerance was explained by differences in body mass, which may thus impose a severe constraint on adaptive variation in stress tolerance. Furthermore, temperature acclimation was beneficial by increasing heat knock-down time and therefore immediate survival under heat stress, but it affected reproduction negatively. Extreme temperatures strongly reduced survival and subsequent reproductive success even in our highly plastic model organism, exemplifying the potentially dramatic impact of extreme weather events on biodiversity. We argue that predictions regarding a species' fate under changing environmental conditions should consider variation in thermal tolerance throughout ontogeny, variation in body mass and acclimation responses as important predictors of stress tolerance. © 2016 John Wiley & Sons Ltd.

Effects of work stress and home stress on autonomic nervous function in Japanese male workers

PubMed Central

MAEDA, Eri; IWATA, Toyoto; MURATA, Katsuyuki

2014-01-01

Autonomic imbalance is one of the important pathways through which psychological stress contributes to cardiovascular diseases/sudden death. Although previous studies have focused mainly on stress at work (work stress), the association between autonomic function and stress at home (home stress) is still poorly understood. The purpose was to clarify the effect of work/home stress on autonomic function in 1,809 Japanese male workers. We measured corrected QT (QTc) interval and QT index on the electrocardiogram along with blood pressure and heart rate. Participants provided self-reported information about the presence/absence of work/home stress and the possible confounders affecting QT indicators. Home stress was related positively to QT index (p=0.040) after adjusting for the possible confounders, though work stress did not show a significant relation to QTc interval or QT index. The odds ratio of home stress to elevated QT index (≥105) was 2.677 (95% CI, 1.050 to 6.822). Work/home stress showed no significant relation to blood pressure or heart rate. These findings suggest that autonomic imbalance, readily assessed by QT indicators, can be induced by home stress in Japanese workers. Additional research is needed to identify different types of home stress that are strongly associated with autonomic imbalance. PMID:25382383

Effects of work stress and home stress on autonomic nervous function in Japanese male workers.

PubMed

Maeda, Eri; Iwata, Toyoto; Murata, Katsuyuki

2015-01-01

Autonomic imbalance is one of the important pathways through which psychological stress contributes to cardiovascular diseases/sudden death. Although previous studies have focused mainly on stress at work (work stress), the association between autonomic function and stress at home (home stress) is still poorly understood. The purpose was to clarify the effect of work/home stress on autonomic function in 1,809 Japanese male workers. We measured corrected QT (QTc) interval and QT index on the electrocardiogram along with blood pressure and heart rate. Participants provided self-reported information about the presence/absence of work/home stress and the possible confounders affecting QT indicators. Home stress was related positively to QT index (p=0.040) after adjusting for the possible confounders, though work stress did not show a significant relation to QTc interval or QT index. The odds ratio of home stress to elevated QT index (≥105) was 2.677 (95% CI, 1.050 to 6.822). Work/home stress showed no significant relation to blood pressure or heart rate. These findings suggest that autonomic imbalance, readily assessed by QT indicators, can be induced by home stress in Japanese workers. Additional research is needed to identify different types of home stress that are strongly associated with autonomic imbalance.

Work stress among nursing home care attendants in Taiwan: a questionnaire survey.

PubMed

Hsu, Hui-Chuan; Kung, Yuan-Wei; Huang, Hsiao-Chien; Ho, Pei-Yu; Lin, Ya-Ying; Chen, Wen-Shin

2007-07-01

Care attendants constitute the main workforce in nursing homes, but their heavy workload, low autonomy, and indefinite responsibility result in high levels of stress and may affect quality of care. However, few studies have focused of this problem. The aim of this study was to examine work-related stress and associated factors that affect care attendants in nursing homes and to offer suggestions for how management can alleviate these problems in care facilities. We recruited participants from nine nursing homes with 50 or more beds located in middle Taiwan; 110 care attendants completed the questionnaire. The work stress scale for the care attendants was validated and achieved good reliability (Cronbach's alpha=0.93). We also conducted exploratory factor analysis. Six factors were extracted from the work stress scale: insufficient ability, stressful reactions, heavy workload, trouble in care work, poor management, and working time problems. The explained variance achieved 64.96%. Factors related to higher work stress included working in a hospital-based nursing home, having a fixed schedule, night work, feeling burden, inconvenient facility, less enthusiasm, and self-rated higher stress. Work stress for care attendants in nursing homes is related to human resource management and quality of care. We suggest potential management strategies to alleviate work stress for these workers.

Laboratory Investigation of Coal Deformation Behavior and Its Influence on Permeability Evolution During Methane Displacement by CO2

NASA Astrophysics Data System (ADS)

Fan, Jingjing; Feng, Ruimin; Wang, Jin; Wang, Yanbin

2017-07-01

Geological sequestration of CO2 in coal seams is of significant interest to both academia and industry. A thorough laboratory investigation of mechanical and flow behaviors is crucial for understanding the complex response of coalbeds to CO2 injection-enhanced coalbed methane recovery (CO2-ECBM) operation. In this work, systematic experiments were carried out on cylindrical coal core specimens under different uniform confining stresses. The coal deformation caused by variations in effective stress as well as the sorption-induced matrix swelling/shrinkage was monitored. The competitive gas sorption characteristics and permeability evolution during the process of methane displacement by CO2 were also investigated. The measured volumetric strain results indicate that sorption-induced strain is the dominant factor in the coal deformation. The relationship between the volumetric strain and the adsorbed gas volume has been revealed to be a linear function. Experimental results obtained under different stress conditions suggest that higher confining stress suppresses the increase in both volumetric strain and the adsorbed gas volume. Furthermore, both methane displacement and CO2 injection are reduced when applying higher confining stresses. In addition, the permeability enhancement is heavily suppressed at higher confining stress. At a certain confining stress, a characteristic "U-shaped" trend of permeability is presented as a function of decreasing pore pressure. This study contributes to the understanding of coal deformation and its impact on permeability evolution under uniformly stressed condition, which has practical significance for CO2 sequestration and CO2-ECBM operation in the Qinshui basin.

Monitoring vegetation dynamics in the Amazon with RapidScat

NASA Astrophysics Data System (ADS)

van Emmerik, Tim; Steele-Dunne, Susan; Paget, Aaron C.; van de Giesen, Nick

2017-04-01

Several studies affiliated diurnal variations in radar backscatter over the Amazon [1,2] with vegetation water stress. Recent studies on tree and corn canopies [3,4] have demonstrated that during periods of low soil moisture availability, the total radar backscatter is primarily sensitive to changes in leaf water content, highlighting the potential of radar for water stress detection. The RapidScat mission (Ku-band, 13.4GHz), mounted on the International Space Station, observes the Earth in a non-sun-synchronous orbit [5]. This unique orbit allows for reconstructing diurnal cycles of radar backscatter. We hypothesize that the state of the canopy is a significant portion of the diurnal variations observed in the radar backscatter. Recent, yet inconclusive, analyses support the theory of the impact of vegetation water content on diurnal variation in RapidScat radar backscatter over the Amazon and Congo. Linking ground measurements of canopy dynamics to radar backscatter will allow further exploration of the possibilities for monitoring vegetation dynamics. Our presentation focuses of two parts. First, we reconstruct diurnal cycles of RapidScat backscatter over the Amazon, and study its variation over time. Second, we analyze the pre-dawn backscatter over time. The water content at this time of day is a measure of water stress, and might therefore be visible in the backscatter time series. References [1] Frolking, S., et al.: "Tropical forest backscatter anomaly evident in SeaWinds scatterometer morning overpass data during 2005 drought in Amazonia", Remote Sensing of Environment, 2011. [2] Jaruwatanadilok, S., and B. Stiles: "Trends and variation in Ku-band backscatter of natural targets on land observed in QuikSCAT data", IEEE Transactions on Geoscience and Remote Sensing , 2014. [3] Steele-Dunne, S., et al.: "Using diurnal variation in backscatter to detect vegetation water stress", IEEE Transactions on Geoscience and Remote Sensing, 2012. [4] van Emmerik, T., et al.: "Impact of diurnal variation in vegetation water content on radar backscatter from maize during water stress", IEEE Transactions on Geoscience and Remote Sensing, 2015. [5] Paget, A., et al.: "RapidScat Diurnal Cycles Over Land", IEEE Transactions on Geoscience and Remote Sensing, 2016.

Work-related stress: A survey of Indian anesthesiologists.

PubMed

Bakshi, Sumitra Ganesh; Divatia, Jigeeshu Vasishtha; Kannan, Sadhana; Myatra, Sheila Nainan

2017-01-01

Work-related stress is common among medical caregivers and concerns all perioperative care providers. Although anesthesiologists are known to experience stress, there are limited Indian data addressing this issue. This survey was conducted among Indian anesthesiologists to determine their awareness about work stress and views regarding prevention programs. A survey questionnaire was distributed to delegates visiting the exhibits at the national anesthesiology conference in 2011. The questionnaire had ten questions on the work pattern, five on work-related stress, nine on opinion regarding the need and willingness to participate in stress-related programs. There were 1178 responders. Forty-three percent were faculty in medical institutions, 26% were residents and 25% were in free-lance practice. Ninety-one percent of participants rated their stress as moderate-extreme. There was a significant correlation between the amount of stress and working for more than 8 h ( P < 0.001), handling high risk patients ( P = 0.002), working on weekends ( P = 0.002), and carrying work back home ( P < 0.001). Forty-one percent of respondents were very satisfied professionally. Seventy-six percent of doctors agreed that the questionnaire had made them think about work stress. Eighty-four percent of participants felt the need for stress management programs and 69% expressed their willingness to participate in the same. The majority of participants rated their stress as moderate-extreme and was higher in anesthesiologists working long hours, over the weekend and those handling high-risk patients. A majority of participants felt the survey made them think about work-related stress and expressed their willingness to participate in stress management programs.

Honey bee (Apis mellifera) drones survive oxidative stress due to increased tolerance instead of avoidance or repair of oxidative damage

USDA-ARS?s Scientific Manuscript database

Oxidative stress can lead to premature aging symptoms and cause acute mortality at higher doses in a range of organisms. Oxidative stress resistance and longevity are mechanistically and phenotypically linked: considerable variation in oxidative stress resistance exists among and within species and ...

Variation among black walnut seedling families in resistance to competition and allelopathy

Treesearch

George Rink; J.W. Van Sambeek

1985-01-01

Of three environmental variables affecting black walnut seedling establishment, moisture stress overshadowed the effects of fescue leachate and fertilizer. Interactions between moisture stress and family and between fescue leachate and moisture stress for both seedling height and dry weight suggested that selection for tolerance to moisture stress is possible, whereas...

SASS-1--SUBASSEMBLY STRESS SURVEY CODE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedrich, C.M.

1960-01-01

SASS-1, an IBM-704 FORTRAN code, calculates pressure, thermal, and combined stresses in a nuclear reactor core subassembly. In addition to cross- section stresses, the code calculates axial shear stresses needed to keep plane cross sections plane under axial variations of temperature. The input and output nomenclature, arrangement, and formats are described. (B.O.G.)

Turbulence Model Predictions of Strongly Curved Flow in a U-Duct

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.; Gatski, Thomas B.; Morrison, Joseph H.

2000-01-01

The ability of three types of turbulence models to accurately predict the effects of curvature on the flow in a U-duct is studied. An explicit algebraic stress model performs slightly better than one- or two-equation linear eddy viscosity models, although it is necessary to fully account for the variation of the production-to-dissipation-rate ratio in the algebraic stress model formulation. In their original formulations, none of these turbulence models fully captures the suppressed turbulence near the convex wall, whereas a full Reynolds stress model does. Some of the underlying assumptions used in the development of algebraic stress models are investigated and compared with the computed flowfield from the full Reynolds stress model. Through this analysis, the assumption of Reynolds stress anisotropy equilibrium used in the algebraic stress model formulation is found to be incorrect in regions of strong curvature. By the accounting for the local variation of the principal axes of the strain rate tensor, the explicit algebraic stress model correctly predicts the suppressed turbulence in the outer part of the boundary layer near the convex wall.

Negative Affectivity, Role Stress, and Work-Family Conflict.

ERIC Educational Resources Information Center

Stoeva, Albena Z.; Chiu, Randy K.; Greenhaus, Jeffrey H.

2002-01-01

Measures of job and family stress and negative affectivity were completed by 148 (of 400) Hong Kong civil service employees. Persons with high negative affectivity experience more work and family stress. Job stress was associated with extensive interference of work with family, and family stress with extensive interference of family with work.…

Impact of inhomogeneity on SH-type wave propagation in an initially stressed composite structure

NASA Astrophysics Data System (ADS)

Saha, S.; Chattopadhyay, A.; Singh, A. K.

2018-02-01

The present analysis has been made on the influence of distinct form of inhomogeneity in a composite structure comprised of double superficial layers lying over a half-space, on the phase velocity of SH-type wave propagating through it. Propagation of SH-type wave in the said structure has been examined in four distinct cases of inhomogeneity viz. when inhomogeneity in double superficial layer is due to exponential variation in density only (Case I); when inhomogeneity in double superficial layers is due to exponential variation in rigidity only (Case II); when inhomogeneity in double superficial layer is due to exponential variation in rigidity, density and initial stress (Case III) and when inhomogeneity in double superficial layer is due to linear variation in rigidity, density and initial stress (Case IV). Closed-form expression of dispersion relation has been accomplished for all four aforementioned cases through extensive application of Debye asymptotic analysis. Deduced dispersion relations for all the cases are found in well-agreement to the classical Love-wave equation. Numerical computation has been carried out to graphically demonstrate the effect of inhomogeneity parameters, initial stress parameters as well as width ratio associated with double superficial layers in the composite structure for each of the four aforesaid cases on dispersion curve. Meticulous examination of distinct cases of inhomogeneity and initial stress in context of considered problem has been carried out with detailed analysis in a comparative approach.

Reproductive stage physiological and transcriptional responses to salinity stress in reciprocal populations derived from tolerant (Horkuch) and susceptible (IR29) rice

NASA Astrophysics Data System (ADS)

Razzaque, Samsad; Haque, Taslima; Elias, Sabrina M.; Rahman, Md. Sazzadur; Biswas, Sudip; Schwartz, Scott; Ismail, Abdelbagi M.; Walia, Harkamal; Juenger, Thomas E.; Seraj, Zeba I.

2017-04-01

Global increase in salinity levels has made it imperative to identify novel sources of genetic variation for tolerance traits, especially in rice. The rice landrace Horkuch, endemic to the saline coastal area of Bangladesh, was used in this study as the source of tolerance in reciprocal crosses with the sensitive but high-yielding IR29 variety for discovering transcriptional variation associated with salt tolerance in the resulting populations. The cytoplasmic effect of the Horkuch background in leaves under stress showed functional enrichment for signal transduction, DNA-dependent regulation and transport activities. In roots the enrichment was for cell wall organization and macromolecule biosynthesis. In contrast, the cytoplasmic effect of IR29 showed upregulation of apoptosis and downregulation of phosphorylation across tissues relative to Horkuch. Differential gene expression in leaves of the sensitive population showed downregulation of GO processes like photosynthesis, ATP biosynthesis and ion transport. Roots of the tolerant plants conversely showed upregulation of GO terms like G-protein coupled receptor pathway, membrane potential and cation transport. Furthermore, genes involved in regulating membrane potentials were constitutively expressed only in the roots of tolerant individuals. Overall our work has developed genetic resources and elucidated the likely mechanisms associated with the tolerance response of the Horkuch genotype.

Globalization and modernization: an obesogenic combination.

PubMed

Huneault, L; Mathieu, M-È; Tremblay, A

2011-05-01

Animal research has well established that a link exists between variations in corticosteroids and the proneness to excess body fat accumulation. Accordingly, it is known that adrenalectomy is an efficient approach to counteract weight gain in most animal models of obesity. In humans, the association between variations in corticosteroids, its stress-related environmental effects and the predisposition to obesity is more difficult to demonstrate. In this paper, we propose that this relationship is accentuated by globalization and modernization which favour a labour context imposing additional stress and changes in life habits promoting a positive energy balance. Our main hypothesis is that the increase in knowledge-based work, and the decrease of quality and duration of sleep both induce an increase in cortisolaemia and glycaemia instability, which results in an increase in food intake, a reduction in energy expenditure and body fat gain. The authors of this paper believe that, from a socioeconomic perspective, globalization leads every nation of the world in conflict with itself and may consequently represent a real problem. On one hand, there are preoccupations related to productivity and money making. On the other hand, people have to adopt a daily lifestyle leading to hyperphagia and decreased energy expenditure in order to maintain their economic competitiveness. © 2011 The Authors. obesity reviews © 2011 International Association for the Study of Obesity.

Analysis of natural variation in bermudagrass (Cynodon dactylon) reveals physiological responses underlying drought tolerance.

PubMed

Shi, Haitao; Wang, Yanping; Cheng, Zhangmin; Ye, Tiantian; Chan, Zhulong

2012-01-01

Bermudagrass (Cynodon dactylon) is a widely used warm-season turfgrass and one of the most drought tolerant species. Dissecting the natural variation in drought tolerance and physiological responses will bring us powerful basis and novel insight for plant breeding. In the present study, we evaluated the natural variation of drought tolerance among nine bermudagrass varieties by measuring physiological responses after drought stress treatment through withholding water. Three groups differing in drought tolerance were identified, including two tolerant, five moderately tolerant and two susceptible varieties. Under drought stress condition, drought sensitive variety (Yukon) showed relative higher water loss, more severe cell membrane damage (EL), and more accumulation of hydrogen peroxide (H₂O₂) and malondialdehyde (MDA), while drought tolerant variety (Tifgreen) exhibited significantly higher antioxidant enzymes activities. Further results indicated that drought induced cell injury in different varieties (Yukon, SR9554 and Tifgreen) exhibited liner correlation with leaf water content (LWC), H₂O₂ content, MDA content and antioxidant enzyme activities. Additionally, Tifgreen plants had significantly higher levels of osmolytes (proline level and soluble sugars) when compared with Yukon and SR9554 under drought stress condition. Taken together, our results indicated that natural variation of drought stress tolerance in bermudagrass varieties might be largely related to the induced changes of water status, osmolyte accumulation and antioxidant defense system.

The Thin Oil Film Equation

NASA Technical Reports Server (NTRS)

Brown, James L.; Naughton, Jonathan W.

1999-01-01

A thin film of oil on a surface responds primarily to the wall shear stress generated on that surface by a three-dimensional flow. The oil film is also subject to wall pressure gradients, surface tension effects and gravity. The partial differential equation governing the oil film flow is shown to be related to Burgers' equation. Analytical and numerical methods for solving the thin oil film equation are presented. A direct numerical solver is developed where the wall shear stress variation on the surface is known and which solves for the oil film thickness spatial and time variation on the surface. An inverse numerical solver is also developed where the oil film thickness spatial variation over the surface at two discrete times is known and which solves for the wall shear stress variation over the test surface. A One-Time-Level inverse solver is also demonstrated. The inverse numerical solver provides a mathematically rigorous basis for an improved form of a wall shear stress instrument suitable for application to complex three-dimensional flows. To demonstrate the complexity of flows for which these oil film methods are now suitable, extensive examination is accomplished for these analytical and numerical methods as applied to a thin oil film in the vicinity of a three-dimensional saddle of separation.

Do sleep, stress, and illness explain daily variations in fatigue? A prospective study.

PubMed

Akerstedt, Torbjörn; Axelsson, John; Lekander, Mats; Orsini, Nicola; Kecklund, Göran

2014-04-01

Fatigue is related to a number of serious diseases, as well as to general well-being. It is also a major cause of sickness absence and use of health facilities. Still, the determinants of variations in fatigue are little investigated. The purpose of present study was to investigate the relationships between the daily variations of fatigue with sleep during the previous night, stress or disease symptoms during the same day - across 42 consecutive days of normal life. 50 individuals participated and gave diary reports and used an actigraph across the 42days. The data was analyzed using a multilevel approach with mixed model regression. The analyses showed that the day-to-day variation in fatigue was related to (poor) sleep quality (p<.001) and (reduced) sleep duration (p<.01) the previous night, as well as to higher stress (p<.05), and to the occurrence of a cold or fever (p<.001) during the same day as the fatigue rating. Fatigue was also strongly related to poorer subjective health (p<.001) and sleepiness (p<.001) during the same day. The results indicate that prior sleep (and sleepiness) as well as stress and illness are consistently connected to how fatigue is experienced during normal living conditions. Copyright © 2014 Elsevier Inc. All rights reserved.

Political influences on greenhouse gas emissions from US states

PubMed Central

Dietz, Thomas; Frank, Kenneth A.; Whitley, Cameron T.; Kelly, Jennifer; Kelly, Rachel

2015-01-01

Starting at least in the 1970s, empirical work suggested that demographic (population) and economic (affluence) forces are the key drivers of anthropogenic stress on the environment. We evaluate the extent to which politics attenuates the effects of economic and demographic factors on environmental outcomes by examining variation in CO2 emissions across US states and within states over time. We find that demographic and economic forces can in part be offset by politics supportive of the environment—increases in emissions over time are lower in states that elect legislators with strong environmental records. PMID:26080396

Catechol-O-Methyltransferase moderates effect of stress mindset on affect and cognition

PubMed Central

Akinola, Modupe; Turnwald, Bradley P.; Kaptchuk, Ted J.; Hall, Kathryn T.

2018-01-01

There is evidence that altering stress mindset—the belief that stress is enhancing vs. debilitating—can change cognitive, affective and physiological responses to stress. However individual differences in responsiveness to stress mindset manipulations have not been explored. Given the previously established role of catecholamines in both placebo effects and stress, we hypothesized that genetic variation in catechol-O-methyltransferase (COMT), an enzyme that metabolizes catecholamines, would moderate responses to an intervention intended to alter participants’ mindsets about stress. Participants (N = 107) were exposed to a stress mindset manipulation (videos highlighting either the enhancing or debilitating effects of stress) prior to engaging in a Trier Social Stress task and subsequent cognitive tasks. The associations of the COMT rs4680 polymorphism with the effect of stress mindset video manipulations on cognitive and affective responses were examined. Genetic variation at rs4680 modified the effects of stress mindset on affective and cognitive responses to stress. Individuals homozygous for rs4680 low-activity allele (met/met) were responsive to the stress-is-enhancing mindset manipulation as indicated by greater increases in positive affect, improved cognitive functioning, and happiness bias in response to stress. Conversely, individuals homozygous for the high-activity allele (val/val) were not as responsive to the stress mindset manipulation. These results suggest that responses to stress mindset intervention may vary with COMT genotype. These findings contribute to the understanding of gene by environment interactions for mindset interventions and stress reactivity and therefore warrant further investigations. PMID:29677196

Proteome Characterization of Leaves in Common Bean

PubMed Central

Robison, Faith M.; Heuberger, Adam L.; Brick, Mark A.; Prenni, Jessica E.

2015-01-01

Dry edible bean (Phaseolus vulgaris L.) is a globally relevant food crop. The bean genome was recently sequenced and annotated allowing for proteomics investigations aimed at characterization of leaf phenotypes important to agriculture. The objective of this study was to utilize a shotgun proteomics approach to characterize the leaf proteome and to identify protein abundance differences between two bean lines with known variation in their physiological resistance to biotic stresses. Overall, 640 proteins were confidently identified. Among these are proteins known to be involved in a variety of molecular functions including oxidoreductase activity, binding peroxidase activity, and hydrolase activity. Twenty nine proteins were found to significantly vary in abundance (p-value < 0.05) between the two bean lines, including proteins associated with biotic stress. To our knowledge, this work represents the first large scale shotgun proteomic analysis of beans and our results lay the groundwork for future studies designed to investigate the molecular mechanisms involved in pathogen resistance. PMID:28248269

Characterization of the Hot Deformation Behavior of a Newly Developed Nickel-Based Superalloy

NASA Astrophysics Data System (ADS)

Shi, Zhaoxia; Yan, Xiaofeng; Duan, Chunhua; Tang, Cunjiang; Pu, Enxiang

2018-03-01

To clarify the microstructural evolution and hot workability of GH4282 during hot forming processes, the hot deformation behavior of this superalloy was investigated by isothermal compression tests in the temperature interval of 950-1210 °C and the strain rate range of 0.01-10 s-1 with a true strain of 0.7. The results show that the flow stresses decrease with an increase in the deformation temperature and a decrease in the strain rate. The characteristic of dynamic recrystallization is revealed by the flow curves. The variation rule of the flow stress can be well described by the hyperbolic sine type equation, and the thermal deformation activation energy is determined to be 498.118 kJ/mol. The optimum hot working parameters are 1100-1180 °C and 0.01-0.1 s-1, under which the fine and uniform microstructure can be obtained.

Taylor Impact Tests and Simulations on PBX 9501

NASA Astrophysics Data System (ADS)

Clements, Brad; Thompson, Darla G.; Luscher, D. J.; Deluca, Racci

2011-06-01

Taylor impact tests have been conducted previously on plastic bonded explosives (PBXs) to characterize the stress state of these materials as they impact smooth and flat steel anvil surfaces at speeds of ~100m/s (i.e. Christopher, et al, 11th Detonation Symposium). In 2003, C. Liu and R. Ellis (unpublished, Los Alamos National Laboratory) performed Taylor tests on PBX 9501 up to speeds of 115 m/s, capturing impact images. In the work presented here, we have extended these tests to velocities of 200 m/s using a composite-lined gun barrel and no specimen sabot. Specimen images are used to validate the thermo-mechanical constitutive model ViscoSCRAM. ViscoSCRAM has been parameterized for PBX 9501 in uniaxial stress configurations. Simulating Taylor impact experiments tests the model in situations undergoing extreme damage. In addition, experimental variations to specimen confinement and friction are introduced in an attempt to establish ignition thresholds in this velocity regime.

Applications of Analytical Self-Similar Solutions of Reynolds-Averaged Models for Instability-Induced Turbulent Mixing

NASA Astrophysics Data System (ADS)

Hartland, Tucker; Schilling, Oleg

2017-11-01

Analytical self-similar solutions to several families of single- and two-scale, eddy viscosity and Reynolds stress turbulence models are presented for Rayleigh-Taylor, Richtmyer-Meshkov, and Kelvin-Helmholtz instability-induced turbulent mixing. The use of algebraic relationships between model coefficients and physical observables (e.g., experimental growth rates) following from the self-similar solutions to calibrate a member of a given family of turbulence models is shown. It is demonstrated numerically that the algebraic relations accurately predict the value and variation of physical outputs of a Reynolds-averaged simulation in flow regimes that are consistent with the simplifying assumptions used to derive the solutions. The use of experimental and numerical simulation data on Reynolds stress anisotropy ratios to calibrate a Reynolds stress model is briefly illustrated. The implications of the analytical solutions for future Reynolds-averaged modeling of hydrodynamic instability-induced mixing are briefly discussed. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

Calculations of hydrogen diffusivity in Zr-based alloys: Influence of alloying elements and effect of stress

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, J.; Jiang, C.; Zhang, Y.

This report summarizes the progress on modeling hydrogen diffusivity in Zr-based alloys. The presence of hydrogen (H) can detrimentally affect the mechanical properties of many metals and alloys. To mitigate these detrimental effects requires fundamental understanding of the thermodynamics and kinetics governing H pickup and hydride formation. In this work, we focus on H diffusion in Zr-based alloys by studying the effects of alloying elements and stress, factors that have been shown to strongly affect H pickup and hydride formation in nuclear fuel claddings. A recently developed accelerated kinetic Monte Carlo method is used for the study. It is foundmore » that for the alloys considered here, H diffusivity depends weakly on composition, with negligible effect at high temperatures in the range of 600-1200 K. Therefore, the small variation in compositions of these alloys is likely not a major cause of the very different H pickup rates. In contrast, stress strongly affects H diffusivity. This effect needs to be considered for studying hydride formation and delayed hydride cracking.« less

On the origin of residual strain in shape memory alloys: experimental investigation on evolutions in the microstructure of CuAlBe during complex thermomechanical loadings

NASA Astrophysics Data System (ADS)

Barati, M.; Arbab Chirani, S.; Kadkhodaei, M.; Saint-Sulpice, L.; Calloch, S.

2017-02-01

The behaviors of shape memory alloys (SMAs) strongly depend on the presence of different phases: austenite, thermally-induced martensite and stress-induced martensite. Consequently, it is important to know the phase volume fraction of each phases and their evolution during thermomechanical loadings. In this work, a three-phase proportioning method based on electric resistivity variation of a CuAlBe SMA is proposed. Simple thermomechanical loadings (i. e. pseudoplasticity and pseudoelasticity), one-way shape memory effect, recovery stress, assisted two-way memory effect at different level of stress and cyclic pseudoelasticity tests are investigated. Based on the electric resistivity results, during each loading path, evolution of the microstructure is determined. The origin of residual strain observed during the considered thermomechanical loadings is discussed. A special attention is paid to two-way shape memory effect generated after considered cyclic loadings and its relation with the developed residual strain. These results permit to identify and to validate the macroscopic models of SMAs behaviors.

Isolation of an indigenous Chlorella vulgaris from swine wastewater and characterization of its nutrient removal ability in undiluted sewage.

PubMed

Wen, Yangmin; He, Yongjin; Ji, Xiaowei; Li, Shaofeng; Chen, Ling; Zhou, Youcai; Wang, Mingzi; Chen, Bilian

2017-11-01

Bio-treatment of wastewater mediated by microalgae is considered as a promising solution. This work aimed to isolate an indigenous microalgal strain (named MBFJNU-1) from swine wastewater effluent and identify as Chlorella vulgaris. After 12days, the removal efficiencies of total nitrogen (TN) and total phosphorus (TP) in undiluted swine slurry were 90.51% and 91.54%, respectively. Stress tolerance in response to wastewater was verified by cultivating in artificial wastewater containing different levels of chemical oxygen demand (COD), TN and TP. MBFJNU-1 could grow well in undiluted swine slurry and artificial wastewater containing 30,000mg/L COD or 2000mg/L TN. Furthermore, global nuclear DNA methylation (5-mC) of MBFJNU-1 was employed to explore the possible mechanism in response to wastewater stress. The results showed that the level of 5-mC was inversely proportional to the growth of MBFJNU-1 in different diluted swine slurry, helping to understand 5-mC variation in response to stress environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Perceived stress at work is associated with attenuated DHEA-S response during acute psychosocial stress.

PubMed

Lennartsson, Anna-Karin; Theorell, Töres; Kushnir, Mark M; Bergquist, Jonas; Jonsdottir, Ingibjörg H

2013-09-01

Dehydroepiandrosterone (DHEA) and dehydroepiandrosterone sulfate (DHEA-S) have been suggested to play a protective role during acute psychosocial stress, because they act as antagonists to the effects of the stress hormone cortisol. This study aims to investigate whether prolonged psychosocial stress, measured as perceived stress at work during the past week, is related to the capacity to produce DHEA and DHEA-S during acute psychosocial stress. It also aims to investigate whether prolonged perceived stress affects the balance between production of cortisol and DHEA-S during acute psychosocial stress. Thirty-six healthy subjects (19 men and 17 women, mean age 37 years, SD 5 years), were included. Perceived stress at work during the past week was measured by using the Stress-Energy (SE) Questionnaire. The participants were divided into three groups based on their mean scores; Low stress, Medium stress and High stress. The participants underwent the Trier Social Stress Test (TSST) and blood samples were collected before, directly after the stress test, and after 30 min of recovery. General Linear Models were used to investigate if the Medium stress group and the High stress group differ regarding stress response compared to the Low stress group. Higher perceived stress at work was associated with attenuated DHEA-S response during acute psychosocial stress. Furthermore, the ratio between the cortisol production and the DHEA-S production during the acute stress test were higher in individuals reporting higher perceived stress at work compared to individuals reporting low perceived stress at work. There was no statistical difference in DHEA response between the groups. This study shows that prolonged stress, measured as perceived stress at work during the past week, seems to negatively affect the capacity to produce DHEA-S during acute stress. Given the protective functions of DHEA-S, attenuated DHEA-S production during acute stress may lead to higher risk for adverse effects on psychological and physiological health, particularly if stress exposure continues. Copyright © 2013 Elsevier Ltd. All rights reserved.

Elastocaloric effect in poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) terpolymer

NASA Astrophysics Data System (ADS)

Yoshida, Yukihiro; Yuse, Kaori; Guyomar, Daniel; Capsal, Jean-Fabien; Sebald, Gael

2016-06-01

The elastocaloric properties of poly (vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) [P(VDF-TrFE-CTFE)] terpolymer were directly characterized using an infrared imaging camera. At a strain of 12%, a reversible adiabatic temperature variation of 2.15 °C was measured, corresponding to an isothermal entropy variation of 21.5 kJ m-3 K-1 or 11 J kg-1 K-1. In comparison with other elastocaloric materials, P(VDF-TrFE-CTFE) appears to represent a trade-off between the large required stresses in shape memory alloys and the large required strains in natural rubber. The internal energy of the P(VDF-TrFE-CTFE) polymer was found to be independent of the strain, resulting in complete conversion of the mechanical work into heat, as for pure elastomeric materials. The elastocaloric effect therefore originates from a pure entropic elasticity, which is likely to be related to the amorphous phase of the polymer only.

Characterizing water resources of the Nile Basin using remotely sensed data

NASA Astrophysics Data System (ADS)

Mekonnen, Z. T.; Gebremichael, M.; Demissie, S. S.

2015-12-01

The Nile is one of the largest river basin in the world with a rich biodiversity as well supporting the lives of 450 million people residing within the 11 riparian countries. This vital resource is under a growing stress due to population growth, rapid development and climate change. In this work, we explore the use of the latest various remote sensing products to capture the water resource of the basin: rainfall from GPM and TRMM, soil moisture from SMAP and SMOS, evapotranspiration from MODIS and EUMETSAT LSA-SAF, and total water storage variations from GRACE. The satellite estimates were supplemented and checked by ground measurements whenever possible. Our results show that spatiotemporal variations of the basin's water resources characteristics are well captured by remote sensing products rather than the scarce point measurements that currently exist. Several aspects of our results will be presented and discussed.

Modeling of outgassing and matrix decomposition in carbon-phenolic composites

NASA Technical Reports Server (NTRS)

Mcmanus, Hugh L.

1994-01-01

Work done in the period Jan. - June 1994 is summarized. Two threads of research have been followed. First, the thermodynamics approach was used to model the chemical and mechanical responses of composites exposed to high temperatures. The thermodynamics approach lends itself easily to the usage of variational principles. This thermodynamic-variational approach has been applied to the transpiration cooling problem. The second thread is the development of a better algorithm to solve the governing equations resulting from the modeling. Explicit finite difference method is explored for solving the governing nonlinear, partial differential equations. The method allows detailed material models to be included and solution on massively parallel supercomputers. To demonstrate the feasibility of the explicit scheme in solving nonlinear partial differential equations, a transpiration cooling problem was solved. Some interesting transient behaviors were captured such as stress waves and small spatial oscillations of transient pressure distribution.

Viscous pulsational instability of the transonic region of isothermal geometrically thin accretion discs. I - Analytical results

NASA Astrophysics Data System (ADS)

Kato, Shoji; Honma, Fumio; Matsumoto, Ryoji

1988-03-01

Viscous instability of the transonic region of the conventional geometrically thin alpha-type accretion disks is examined analytically. For simplicity, isothermal disks and isothermal perturbations are assumed. It is found that when the value of alpha is larger than a critical value the disk is unstable against two types of perturbations. One is local propagating perturbations of inertial acoustic waves. Results suggest the possibility that unstable perturbations develop to overstable global oscillations which are restricted only in the innermost region of the disk. The other is standing growing perturbations localized just at the transonic point. The cause of these instabilities is that the azimuthal component of the Lagrangian velocity variation associated with the perturbations becomes in phase with the variation of the viscous stress force. Because of this phase matching work is done on perturbations, and they are amplified.

Kinematic, Dynamic, and Energy Characteristics of Diastolic Flow in the Left Ventricle

PubMed Central

Khalafvand, Seyed Saeid; Hung, Tin-Kan; Ng, Eddie Yin-Kwee; Zhong, Liang

2015-01-01

Blood flow characteristics in the normal left ventricle are studied by using the magnetic resonance imaging, the Navier-Stokes equations, and the work-energy equation. Vortices produced during the mitral valve opening and closing are modeled in a two-dimensional analysis and correlated with temporal variations of the Reynolds number and pressure drop. Low shear stress and net pressures on the mitral valve are obtained for flow acceleration and deceleration. Bernoulli energy flux delivered to blood from ventricular dilation is practically balanced by the energy influx and the rate change of kinetic energy in the ventricle. The rates of work done by shear and energy dissipation are small. The dynamic and energy characteristics of the 2D results are comparable to those of a 3D model. PMID:26417381

Pore Pressure and Field stress variation from Salt Water Injection; A case Study from Beaver Lodge Field in Williston Basin

NASA Astrophysics Data System (ADS)

Mohammed, R. A.; Khatibi, S.

2017-12-01

One of the major concerns in producing from oil and gas reservoirs in North American Basins is the disposal of high salinity salt water. It is a misconception that Hydro frack triggers Earthquakes, but due to the high salinity and density of water being pumped to the formation that has pore space of the rock already filled, which is not the case in Hydro-frack or Enhanced Oil Recovery in which fracturing fluid is pumped into empty pore space of rocks in depleted reservoirs. A review on the Bakken history showed that the concerns related to induce seismicity has increased over time due to variations in Pore pressure and In-situ stress that have shown steep changes in the region over the time. In this study, we focused on Pore pressure and field Stress variations in lower Cretaceous Inyan Kara and Mississippian Devonian Bakken, Inyan Kara is the major source for class-II salt-water disposal in the basin. Salt-water disposal is the major cause for induced seismicity. A full field study was done on Beaver Lodge Field, which has many salt-water disposal wells Adjacent to Oil and Gas Wells. We analyzed formation properties, stresses, pore-pressure, and fracture gradient profile in the field and. The constructed Mechanical Earth Model (MEM) revealed changes in pore pressure and stresses over time due to saltwater injection. Well drilled in the past were compared to recently drilled wells, which showed much stress variations. Safe mud weight Window of wells near proximity of injection wells was examined which showed many cases of wellbore instabilities. Results of this study will have tremendous impact in studying environmental issues and the future drilling and Fracking operations.

Interactions between ecology, demography, capture stress, and profiles of corticosterone and glucose in a free-living population of Australian freshwater crocodiles.

PubMed

Jessop, Tim S; Tucker, Anton D; Limpus, Colin J; Whittier, Joan M

2003-06-01

In this study we examined three aspects pertaining to adrenocortical responsiveness in free-ranging Australian freshwater crocodiles (Crocodylus johnstoni). First, we examined the ability of freshwater crocodiles to produce corticosterone in response to a typical capture-stress protocol. A second objective addressed the relationship between capture stress, plasma glucose and corticosterone. Next we examined if variation in basal and capture-stress-induced levels of plasma corticosterone was linked to ecological or demographic factors for individuals in this free-ranging population. Blood samples obtained on three field trips were taken from a cross-sectional sample of the population. Crocodiles were bled once during four time categories at 0, 0.5, 6, and 10h post-capture. Plasma corticosterone increased significantly with time post-capture. Plasma glucose also significantly increased with duration of capture-stress and exhibited a positive and significant relationship with plasma corticosterone. Significant variation in basal or stress induced levels of corticosterone in crocodiles was not associated with any ecological or demographic factors including sex, age class or the year of capture that the crocodiles were sampled from. However, three immature males had basal levels of plasma corticosterone greater than 2 standard deviations above the mean. While crocodiles exhibited a pronounced adrenocortical and hyperglycaemic response to capture stress, limited variation in adrenocortical responsiveness due to ecological and demographic factors was not evident. This feature could arise in part because this population was sampled during a period of environmental benigness.

Quantitative analysis of scapholunate diastasis using stress speckle-tracking sonography: a proof-of-concept and feasibility study.

PubMed

Gondim Teixeira, Pedro Augusto; Badr, Sammy; Hossu, Gabriela; Lefebvre, Guillaume; Abou Arab, Waled; Blum, Alain; Cotten, Anne

2017-12-01

To evaluate the feasibility and potential clinical applicability of speckle-tracking sonography for the dynamic evaluation of the scapholunate diastasis during stress manoeuvres. Two readers used speckle tracking sonography to evaluate scapholunate diastasis during a clenching fist manoeuver in 30 normal wrists. Scapholunate peak strain, mean scapholunate diastasis and the diastasis variation coefficient were analysed. IRB exemption was granted for this study. Conventional and stress wrist radiographs of 26 patients with and without a scapholunate ligament tear were retrospectively analysed to ascertain the range of variation in scapholunate diastasis. Speckle-tracking parameters in normal wrists were similar between the two readers (p  > 0.2061). The maximal scapholunate peak strain during stress was relatively low (<0.34-0.47 mm). The normal radiographic diastasis amplitude was similar to maximal strain peak values in normal volunteers (0.49 ± 0.51 mm). The radiographic diastasis amplitude in cases of scapholunate ligament tears was 1.48 ± 0.78 mm, which was higher than the 95% confidence interval of the scapholunate gap peak strain. Speckle-tracking sonography could represent an interesting alternative for stress evaluation of the scapholunate ligament in patients with scapholunate diastasis. • Speckle-tracking sonography can assess scapholunate diastasis under stress testing. • Scapholunate gap shows little variation under stress in healthy volunteers. • Scapholunate gap measurements are influenced by grip strength. • Sex and BMI have a significant influence on strain measurements.

Crustal anisotropy in the forearc of the Northern Cascadia Subduction Zone, British Columbia

NASA Astrophysics Data System (ADS)

Balfour, N. J.; Cassidy, J. F.; Dosso, S. E.

2012-01-01

This paper aims to identify sources and variations of crustal anisotropy from shear-wave splitting measurements in the forearc of the Northern Cascadia Subduction Zone of southwest British Columbia. Over 20 permanent stations and 15 temporary stations were available for shear-wave splitting analysis on ˜4500 event-station pairs for local crustal earthquakes. Results from 1100 useable shear-wave splitting measurements show spatial variations in fast directions, with margin-parallel fast directions at most stations and margin-perpendicular fast directions at stations in the northeast of the region. Crustal anisotropy is often attributed to stress and has been interpreted as the fast direction being related to the orientation of the maximum horizontal compressive stress. However, studies have also shown anisotropy can be complicated by crustal structure. Southwest British Columbia is a complex region of crustal deformation and some of the stations are located near large ancient faults. To use seismic anisotropy as a stress indicator requires identifying which stations are influenced by stress and which by structure. We determine the source of anisotropy at each station by comparing fast directions from shear-wave splitting results to the maximum horizontal compressive stress orientation determined from earthquake focal mechanism inversion. Most stations show agreement between the fast direction and the maximum horizontal compressive stress. This suggests that anisotropy is related to stress-aligned fluid-filled microcracks based on extensive dilatancy anisotropy. These stations are further analysed for temporal variations to lay groundwork for monitoring temporal changes in the stress over extended time periods. Determining the sources of variability in anisotropy can lead to a better understanding of the crustal structure and stress, and in the future may be used as a monitoring and mapping tool.

A cross-sectional study on the relationships among the polymorphism of period2 gene, work stress, and insomnia.

PubMed

Li, Ju; Huang, Chan; Lan, Yajia; Wang, Yongwei

2015-12-01

Work-related stress factors are commonly considered to be increasing the risk of insomnia. But the association between circadian-rhythm gene period2 (per2) and insomnia remains unknown. The paper aimed to examine the relationships among the polymorphism in rs7602358 of Per2 gene, work stress, and insomnia. In the cross-sectional study of a total of 364 Chinese workers recruited, 218 had insomnia tested by the Athens Insomnia Scale (AIS-5). Work stress was assessed using the General Job Stress Questionnaire (GJSQ). Per2 genotypes were determined by SNaPshot technology. Unconditional logistic regression analysis was used to examine the interaction between polymorphism of Per2 and work stress in insomnia. The genotype AC or allele C of Per2 significantly increased the risk of insomnia (OR, 5.41; 95 % CI, 2.23-13.1) (OR, 3.29; 95 % CI, 1.55-6.98). Compared to low work stress, high work stress had a higher risk of insomnia (OR, 2.73; 95 % CI, 1.77-4.22). A significant interaction between Per2 and work stress in the risk of insomnia was found. Compared to workers with low work stress and genotype AA, those with high work stress and genotype AC had a higher risk of insomnia (OR, 15.12; 95 % CI, 3.46-66.09). The effect of genotype AC or allele C of Per2 on insomnia was relatively stronger than that of high work stress, suggesting that individual's susceptibility should be taken into consideration when intervening and controlling insomnia of workers.

The five-factor model of personality, work stress and professional quality of life in neonatal intensive care unit nurses.

PubMed

Barr, Peter

2018-06-01

The study aim was to determine the direct and indirect relations of the five-factor model of personality traits and work stress with professional quality of life in neonatal nurses. Neonatal intensive care nursing has positive and negative effects on neonatal nurses' psychological well-being. Although individual and situational factors interact to influence professional quality of life, there have been few studies of these relationships in neonatal nurses. A cross-sectional study conducted in 2016. Self-report questionnaires were used to measure professional quality of life (burnout, secondary traumatic stress and compassion satisfaction), five-factor model of personality traits (neuroticism, agreeableness, extraversion, conscientiousness and openness) and work stress (role ambiguity, role conflict and role overload). One hundred and forty (34%) of 405 eligible neonatal nurses provided the data. After controlling for work stress, neuroticism and agreeableness were related to burnout, neuroticism was related to secondary traumatic stress, and extraversion was related to compassion satisfaction. Work stress controlled for personality traits was related to burnout and secondary traumatic stress, but not to compassion satisfaction. Neuroticism moderated the effect of work stress on secondary traumatic stress and agreeableness and openness moderated the effect of work stress on compassion satisfaction. Work stress mediated the effect of neuroticism and extraversion on burnout and the effects of extraversion and conscientiousness on compassion satisfaction. Strategies to reduce work stress may not lessen burnout and secondary traumatic stress or increase compassion satisfaction in neonatal nurses who are prone to high neuroticism, low agreeableness and low extraversion. © 2018 John Wiley & Sons Ltd.

Is occupational stress associated with work engagement ?

PubMed

Padula, Rosimeire Simprini; Chiavegato, Luciana Dias; Cabral, Cristina Maria Nunes; Almeid, Talita; Ortiz, Thais; Carregaro, Rodrigo Luiz

2012-01-01

The occupational stress is associated with dissatisfaction, excessive demand at work and personal factors. Those factors can reduce work performance and can predispose workers to various diseases. Workers' health may be protected if there is encouragement to face challenges, which may lessen the impact on psychological and somatic stress and thus have greater personal and professional satisfaction. The aim of this study was to evaluate the association between occupational stress and work engagement. Participated in this study 457 male and female workers of a metallurgical industry. Subjects answered personal data, and the Job Stress Scale and Utrecht Work Engagement Scale were applied. Results showed an association between occupational stress and work engagement (P=0,001). The way the individual deals with his frustrations, or rather the work engagement, is associated with the occupational stress.

Adaptive diversification of growth allometry in the plant Arabidopsis thaliana.

PubMed

Vasseur, François; Exposito-Alonso, Moises; Ayala-Garay, Oscar J; Wang, George; Enquist, Brian J; Vile, Denis; Violle, Cyrille; Weigel, Detlef

2018-03-27

Seed plants vary tremendously in size and morphology; however, variation and covariation in plant traits may be governed, at least in part, by universal biophysical laws and biological constants. Metabolic scaling theory (MST) posits that whole-organismal metabolism and growth rate are under stabilizing selection that minimizes the scaling of hydrodynamic resistance and maximizes the scaling of resource uptake. This constrains variation in physiological traits and in the rate of biomass accumulation, so that they can be expressed as mathematical functions of plant size with near-constant allometric scaling exponents across species. However, the observed variation in scaling exponents calls into question the evolutionary drivers and the universality of allometric equations. We have measured growth scaling and fitness traits of 451 Arabidopsis thaliana accessions with sequenced genomes. Variation among accessions around the scaling exponent predicted by MST was correlated with relative growth rate, seed production, and stress resistance. Genomic analyses indicate that growth allometry is affected by many genes associated with local climate and abiotic stress response. The gene with the strongest effect, PUB4 , has molecular signatures of balancing selection, suggesting that intraspecific variation in growth scaling is maintained by opposing selection on the trade-off between seed production and abiotic stress resistance. Our findings suggest that variation in allometry contributes to local adaptation to contrasting environments. Our results help reconcile past debates on the origin of allometric scaling in biology and begin to link adaptive variation in allometric scaling to specific genes. Copyright © 2018 the Author(s). Published by PNAS.

Adaptive diversification of growth allometry in the plant Arabidopsis thaliana

PubMed Central

Vasseur, François; Ayala-Garay, Oscar J.; Wang, George; Enquist, Brian J.; Vile, Denis; Violle, Cyrille

2018-01-01

Seed plants vary tremendously in size and morphology; however, variation and covariation in plant traits may be governed, at least in part, by universal biophysical laws and biological constants. Metabolic scaling theory (MST) posits that whole-organismal metabolism and growth rate are under stabilizing selection that minimizes the scaling of hydrodynamic resistance and maximizes the scaling of resource uptake. This constrains variation in physiological traits and in the rate of biomass accumulation, so that they can be expressed as mathematical functions of plant size with near-constant allometric scaling exponents across species. However, the observed variation in scaling exponents calls into question the evolutionary drivers and the universality of allometric equations. We have measured growth scaling and fitness traits of 451 Arabidopsis thaliana accessions with sequenced genomes. Variation among accessions around the scaling exponent predicted by MST was correlated with relative growth rate, seed production, and stress resistance. Genomic analyses indicate that growth allometry is affected by many genes associated with local climate and abiotic stress response. The gene with the strongest effect, PUB4, has molecular signatures of balancing selection, suggesting that intraspecific variation in growth scaling is maintained by opposing selection on the trade-off between seed production and abiotic stress resistance. Our findings suggest that variation in allometry contributes to local adaptation to contrasting environments. Our results help reconcile past debates on the origin of allometric scaling in biology and begin to link adaptive variation in allometric scaling to specific genes. PMID:29540570

Poor working conditions and work stress among Canadian sex workers.

PubMed

Duff, P; Sou, J; Chapman, J; Dobrer, S; Braschel, M; Goldenberg, S; Shannon, K

2017-10-01

While sex work is often considered the world's oldest profession, there remains a dearth of research on work stress among sex workers (SWs) in occupational health epidemiological literature. A better understanding of the drivers of work stress among SWs is needed to inform sex work policy, workplace models and standards. To examine the factors that influence work stress among SWs in Metro Vancouver. Analyses drew from a longitudinal cohort of SWs, known as An Evaluation of Sex Workers' Health Access (AESHA) (2010-14). A modified standardized 'work stress' scale, multivariable linear regression with generalized estimating equations was used to longitudinally examine the factors associated with work stress. In multivariable analysis, poor working conditions were associated with increased work stress and included workplace physical/sexual violence (β = 0.18; 95% confidence interval (CI) 0.06, 0.29), displacement due to police (β = 0.26; 95% CI 0.14, 0.38), working in public spaces (β = 0.73; 95% CI 0.61, 0.84). Older (β = -0.02; 95% CI -0.03, -0.01) and Indigenous SWs experienced lower work stress (β = -0.25; 95% CI -0.43, -0.08), whereas non-injection (β = 0.32; 95% CI 0.14, 0.49) and injection drug users (β = 0.17; 95% CI 0.03, 0.31) had higher work stress. Vancouver-based SWs' work stress was largely shaped by poor work conditions, such as violence, policing, lack of safe workspaces. There is a need to move away from criminalized approaches which shape unsafe work conditions and increase work stress for SWs. Policies that promote SWs' access to the same occupational health, safety and human rights standards as workers in other labour sectors are also needed. © The Author 2017. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Impact of prenatal stress on offspring glucocorticoid levels: A phylogenetic meta-analysis across 14 vertebrate species.

PubMed

Thayer, Zaneta M; Wilson, Meredith A; Kim, Andrew W; Jaeggi, Adrian V

2018-03-21

Prenatal exposure to maternal stress is commonly associated with variation in Hypothalamic Pituitary Adrenal (HPA)-axis functioning in offspring. However, the strength or consistency of this response has never been empirically evaluated across vertebrate species. Here we meta-analyzed 114 results from 39 studies across 14 vertebrate species using Bayesian phylogenetic mixed-effects models. We found a positive overall effect of prenatal stress on offspring glucocorticoids (d' = 0.43) though the 95% Highest Posterior Density Interval overlapped with 0 (-0.16-0.95). Meta-regressions of potential moderators highlighted that phylogeny and life history variables predicted relatively little variation in effect size. Experimental studies (d' = 0.64) produced stronger effects than observational ones (d' = -0.01), while prenatal stress affected glucocorticoid recovery following offspring stress exposure more strongly (d' = 0.75) than baseline levels (d' = 0.48) or glucocorticoid peak response (d' = 0.36). These findings are consistent with the argument that HPA-axis sensitivity to prenatal stress is evolutionarily ancient and occurs regardless of a species' overall life history strategy. These effects may therefore be especially important for mediating intra-specific life-history variation. In addition, these findings suggest that animal models of prenatal HPA-axis programming may be appropriate for studying similar effects in humans.

Welding induced residual stress evaluation using laser-generated Rayleigh waves

NASA Astrophysics Data System (ADS)

Ye, Chong; Zhou, Yuanlai; Reddy, Vishnu V. B.; Mebane, Aaron; Ume, I. Charles

2018-04-01

Welding induced residual stress could affect the dimensional stability, fatigue life, and chemical resistance of the weld joints. Ultrasonic method serves as an important non-destructive tool for the residual stress evaluation due to its easy implementation, low cost and wide application to different materials. Residual stress would result in the ultrasonic wave velocity variation, which is the so called acoustoelastic effect. In this paper, Laser/EMAT ultrasonic technique was proposed to experimentally study the relative velocity variation ΔV/V of Rayleigh wave, which has the potential to evaluate surface/subsurface longitudinal residual stress developed during the Gas Metal Arc Welding process. Broad band ultrasonic waves were excited by pulsed Q-Switched Nd: YAG laser. An electromagnetic acoustic transducer (EMAT) attached to the welded plates was used to capture the Rayleigh wave signals propagating along the weld seam direction. Different time of flight measurements were conducted by varying the distance between the weld seam and Rayleigh wave propagating path in the range of 0 to 45 mm. The maximum relative velocity difference was found on the weld seam. With the increasing distance away from the weld seam, the relative velocity difference sharply decreased to negative value. With further increase in distance, the relative velocity difference slowly increased and approached zero. The distribution of relative velocity variations indicates that tensile stress appears in the melted zone as it becomes compressive near the heat-affected zone.

Physical stress, mass, and energy for non-relativistic matter

NASA Astrophysics Data System (ADS)

Geracie, Michael; Prabhu, Kartik; Roberts, Matthew M.

2017-06-01

For theories of relativistic matter fields there exist two possible definitions of the stress-energy tensor, one defined by a variation of the action with the coframes at fixed connection, and the other at fixed torsion. These two stress-energy tensors do not necessarily coincide and it is the latter that corresponds to the Cauchy stress measured in the lab. In this note we discuss the corresponding issue for non-relativistic matter theories. We point out that while the physical non-relativistic stress, momentum, and mass currents are defined by a variation of the action at fixed torsion, the energy current does not admit such a description and is naturally defined at fixed connection. Any attempt to define an energy current at fixed torsion results in an ambiguity which cannot be resolved from the background spacetime data or conservation laws. We also provide computations of these quantities for some simple non-relativistic actions.

Consequences of boundary-spanning demands and resources for work-to-family conflict and perceived stress.

PubMed

Voydanoff, Patricia

2005-10-01

Using work-family border theory, this article examines relationships between boundary-spanning demands and resources and work-to-family conflict and perceived stress. The analysis uses data from 2,109 respondents from the 2002 National Study of the Changing Workforce. The demands that were positively related to work-to-family conflict and perceived stress were commuting time, bringing work home, job contacts at home, and work-family multitasking. Work-family multitasking partially explained the effects of bringing work home and job contacts at home on conflict and stress. For resources, time off for family responsibilities and a supportive work-family culture showed negative associations with conflict and stress. Work-to-family conflict partially mediated relationships between several demands and resources and perceived stress. Copyright (c) 2005 APA, all rights reserved.

HOLEGAGE 1.0 - Strain-Gauge Drilling Analysis Program

NASA Technical Reports Server (NTRS)

Hampton, Roy V.

1992-01-01

Interior stresses inferred from changes in surface strains as hole is drilled. Computes stresses using strain data from each drilled-hole depth layer. Planar stresses computed in three ways: least-squares fit for linear variation with depth, integral method to give incremental stress data for each layer, and/or linear fit to integral data. Written in FORTRAN 77.

Damped regional-scale stress inversions: Methodology and examples for southern California and the Coalinga aftershock sequence

USGS Publications Warehouse

Hardebeck, J.L.; Michael, A.J.

2006-01-01

We present a new focal mechanism stress inversion technique to produce regional-scale models of stress orientation containing the minimum complexity necessary to fit the data. Current practice is to divide a region into small subareas and to independently fit a stress tensor to the focal mechanisms of each subarea. This procedure may lead to apparent spatial variability that is actually an artifact of overfitting noisy data or nonuniquely fitting data that does not completely constrain the stress tensor. To remove these artifacts while retaining any stress variations that are strongly required by the data, we devise a damped inversion method to simultaneously invert for stress in all subareas while minimizing the difference in stress between adjacent subareas. This method is conceptually similar to other geophysical inverse techniques that incorporate damping, such as seismic tomography. In checkerboard tests, the damped inversion removes the stress rotation artifacts exhibited by an undamped inversion, while resolving sharper true stress rotations than a simple smoothed model or a moving-window inversion. We show an example of a spatially damped stress field for southern California. The methodology can also be used to study temporal stress changes, and an example for the Coalinga, California, aftershock sequence is shown. We recommend use of the damped inversion technique for any study examining spatial or temporal variations in the stress field.

Experimental investigation and constitutive model for lime mudstone.

PubMed

Wang, Junbao; Liu, Xinrong; Zhao, Baoyun; Song, Zhanping; Lai, Jinxing

2016-01-01

In order to investigate the mechanical properties of lime mudstone, conventional triaxial compression tests under different confining pressures (0, 5, 15 and 20 MPa) are performed on lime mudstone samples. The test results show that, from the overall perspective of variation law, the axial peak stress, axial peak strain and elastic modulus of lime mudstone tend to gradually increase with increasing confining pressure. In the range of tested confining pressure, the variations in axial peak stress and elastic modulus with confining pressure can be described with linear functions; while the variation in axial peak strain with confining pressure can be reflected with a power function. To describe the axial stress-strain behavior in failure process of lime mudstone, a new constitutive model is proposed, with the model characteristics analyzed and the parameter determination method put forward. Compared with Wang' model, only one parameter n is added to the new model. The comparison of predicted curves from the model and test data indicates that the new model can preferably simulate the strain softening property of lime mudstone and the axial stress-strain response in rock failure process.

Leptin regulates dopamine responses to sustained stress in humans.

PubMed

Burghardt, Paul R; Love, Tiffany M; Stohler, Christian S; Hodgkinson, Colin; Shen, Pei-Hong; Enoch, Mary-Anne; Goldman, David; Zubieta, Jon-Kar

2012-10-31

Neural systems that identify and respond to salient stimuli are critical for survival in a complex and changing environment. In addition, interindividual differences, including genetic variation and hormonal and metabolic status likely influence the behavioral strategies and neuronal responses to environmental challenges. Here, we examined the relationship between leptin allelic variation and plasma leptin levels with DAD2/3R availability in vivo as measured with [(11)C]raclopride PET at baseline and during a standardized pain stress challenge. Allelic variation in the leptin gene was associated with varying levels of dopamine release in response to the pain stressor, but not with baseline D2/3 receptor availability. Circulating leptin was also positively associated with stress-induced dopamine release. These results show that leptin serves as a regulator of neuronal function in humans and provides an etiological mechanism for differences in dopamine neurotransmission in response to salient stimuli as related to metabolic function. The capacity for leptin to influence stress-induced dopaminergic function is of importance for pathological states where dopamine is thought to play an integral role, such as mood, substance-use disorders, eating disorders, and obesity.

On the penetration of a hot diapir through a strongly temperature-dependent viscosity medium

NASA Technical Reports Server (NTRS)

Daly, S. F.; Raefsky, A.

1985-01-01

The ascent of a hot spherical body through a fluid with a strongly temperature-dependent viscosity has been studied using an axisymmetric finite element method. Numerical solutions range over Peclet numbers of 0.1 - 1000 from constant viscosity up to viscosity variations of 100,000. Both rigid and stress-free boundary conditions were applied at the surface of the sphere. The dependence of drag on viscosity variation was shown to have no dependence on the stress boundary condition except for a Stokes flow scaling factor. A Nusselt number parameterization based on the stress-free constant viscosity functional dependence on the Peclet number scaled by a parameter depending on the viscosity structure fits both stress-free and rigid boundary condition data above viscosity variations of 100. The temperature scale height was determined as a function of sphere radius. For the simple physical model studied in this paper pre-heating is required to reduce the ambient viscosity of the country rock to less than 10 to the 22nd sq cm/s in order for a 10 km diapir to penetrate a distance of several radii.

Crystallographic Orientation Identification in Multicrystalline Silicon Wafers Using NIR Transmission Intensity

NASA Astrophysics Data System (ADS)

Skenes, Kevin; Kumar, Arkadeep; Prasath, R. G. R.; Danyluk, Steven

2018-02-01

Near-infrared (NIR) polariscopy is a technique used for the non-destructive evaluation of the in-plane stresses in photovoltaic silicon wafers. Accurate evaluation of these stresses requires correct identification of the stress-optic coefficient, a material property which relates photoelastic parameters to physical stresses. The material stress-optic coefficient of silicon varies with crystallographic orientation. This variation poses a unique problem when measuring stresses in multicrystalline silicon (mc-Si) wafers. This paper concludes that the crystallographic orientation of silicon can be estimated by measuring the transmission of NIR light through the material. The transmission of NIR light through monocrystalline wafers of known orientation were compared with the transmission of NIR light through various grains in mc-Si wafers. X-ray diffraction was then used to verify the relationship by obtaining the crystallographic orientations of these assorted mc-Si grains. Variation of transmission intensity for different crystallographic orientations is further explained by using planar atomic density. The relationship between transmission intensity and planar atomic density appears to be linear.

Stress-Induced Mutagenesis: Implications in Cancer and Drug Resistance.

PubMed

Fitzgerald, Devon M; Hastings, P J; Rosenberg, Susan M

2017-03-01

Genomic instability underlies many cancers and generates genetic variation that drives cancer initiation, progression, and therapy resistance. In contrast with classical assumptions that mutations occur purely stochastically at constant, gradual rates, microbes, plants, flies, and human cancer cells possess mechanisms of mutagenesis that are upregulated by stress responses. These generate transient, genetic-diversity bursts that can propel evolution, specifically when cells are poorly adapted to their environments-that is, when stressed. We review molecular mechanisms of stress-response-dependent (stress-induced) mutagenesis that occur from bacteria to cancer, and are activated by starvation, drugs, hypoxia, and other stressors. We discuss mutagenic DNA break repair in Escherichia coli as a model for mechanisms in cancers. The temporal regulation of mutagenesis by stress responses and spatial restriction in genomes are common themes across the tree of life. Both can accelerate evolution, including the evolution of cancers. We discuss possible anti-evolvability drugs, aimed at targeting mutagenesis and other variation generators, that could be used to delay the evolution of cancer progression and therapy resistance.

Stress-Induced Mutagenesis: Implications in Cancer and Drug Resistance

PubMed Central

Fitzgerald, Devon M.; Hastings, P.J.; Rosenberg, Susan M.

2017-01-01

Genomic instability underlies many cancers and generates genetic variation that drives cancer initiation, progression, and therapy resistance. In contrast with classical assumptions that mutations occur purely stochastically at constant, gradual rates, microbes, plants, flies, and human cancer cells possess mechanisms of mutagenesis that are upregulated by stress responses. These generate transient, genetic-diversity bursts that can propel evolution, specifically when cells are poorly adapted to their environments—that is, when stressed. We review molecular mechanisms of stress-response-dependent (stress-induced) mutagenesis that occur from bacteria to cancer, and are activated by starvation, drugs, hypoxia, and other stressors. We discuss mutagenic DNA break repair in Escherichia coli as a model for mechanisms in cancers. The temporal regulation of mutagenesis by stress responses and spatial restriction in genomes are common themes across the tree of life. Both can accelerate evolution, including the evolution of cancers. We discuss possible anti-evolvability drugs, aimed at targeting mutagenesis and other variation generators, that could be used to delay the evolution of cancer progression and therapy resistance. PMID:29399660

Work stress, work motivation and their effects on job satisfaction in community health workers: a cross-sectional survey in China.

PubMed

Li, Li; Hu, Hongyan; Zhou, Hao; He, Changzhi; Fan, Lihua; Liu, Xinyan; Zhang, Zhong; Li, Heng; Sun, Tao

2014-06-05

It is well documented that both work stress and work motivation are key determinants of job satisfaction. The aim of this study was to examine levels of work stress and motivation and their contribution to job satisfaction among community health workers in Heilongjiang Province, China. Cross-sectional survey. Heilongjiang Province, China. The participants were 930 community health workers from six cities in Heilongjiang Province. Multistage sampling procedures were used to measure socioeconomic and demographic status, work stress, work motivation and job satisfaction. Logistic regression analysis was performed to assess key determinants of job satisfaction. There were significant differences in some subscales of work stress and work motivation by some of the socioeconomic characteristics. Levels of overall stress perception and scores on all five work stress subscales were higher in dissatisfied workers relative to satisfied workers. However, levels of overall motivation perception and scores on the career development, responsibility and recognition motivation subscales were higher in satisfied respondents relative to dissatisfied respondents. The main determinants of job satisfaction were occupation; age; title; income; the career development, and wages and benefits subscales of work stress; and the recognition, responsibility and financial subscales of work motivation. The findings indicated considerable room for improvement in job satisfaction among community health workers in Heilongjiang Province in China. Healthcare managers and policymakers should take both work stress and motivation into consideration, as two subscales of work stress and one subscale of work motivation negatively influenced job satisfaction and two subscales of work motivation positively influenced job satisfaction. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

How do line managers experience and handle the return to work of employees on sick leave due to work-related stress? A one-year follow-up study.

PubMed

Ladegaard, Yun; Skakon, Janne; Elrond, Andreas Friis; Netterstrøm, Bo

2017-08-28

To examine how line managers experience and manage the return to work process of employees on sick leave due to work-related stress and to identify supportive and inhibiting factors. Semi-structured interviews with 15 line managers who have had employees on sick leave due to work-related stress. The grounded theory approach was employed. Even though managers may accept the overall concept of work-related stress, they focus on personality and individual circumstances when an employee is sick-listed due to work-related stress. The lack of a common understanding of stress creates room for this focus. Line managers experience cross-pressure, discrepancies between strategic and human-relationship perspectives and a lack of organizational support in the return to work process. Organizations should aim to provide support for line managers. Research-based knowledge and guidelines on work-related stress and return to work process are essential, as is the involvement of coworkers. A commonly accepted definition of stress and a systematic risk assessment is also important. Cross-pressure on line managers should be minimized and room for adequate preventive actions should be provided as such an approach could support both the return to work process and the implementation of important interventions in the work environment. Implication for rehabilitation Organizations should aim to provide support for line managers handling the return to work process. Cross-pressure on line managers should be minimized and adequate preventive actions should be provided in relation to the return to work process. Research-based knowledge and guidelines on work-related stress and return to work are essential. A common and formal definition of stress should be emphasized in the workplace.

Work stress, work motivation and their effects on job satisfaction in community health workers: a cross-sectional survey in China

PubMed Central

Li, Li; Hu, Hongyan; Zhou, Hao; He, Changzhi; Fan, Lihua; Liu, Xinyan; Zhang, Zhong; Li, Heng; Sun, Tao

2014-01-01

Objective It is well documented that both work stress and work motivation are key determinants of job satisfaction. The aim of this study was to examine levels of work stress and motivation and their contribution to job satisfaction among community health workers in Heilongjiang Province, China. Design Cross-sectional survey. Setting Heilongjiang Province, China. Participants The participants were 930 community health workers from six cities in Heilongjiang Province. Primary and secondary outcome measures Multistage sampling procedures were used to measure socioeconomic and demographic status, work stress, work motivation and job satisfaction. Logistic regression analysis was performed to assess key determinants of job satisfaction. Results There were significant differences in some subscales of work stress and work motivation by some of the socioeconomic characteristics. Levels of overall stress perception and scores on all five work stress subscales were higher in dissatisfied workers relative to satisfied workers. However, levels of overall motivation perception and scores on the career development, responsibility and recognition motivation subscales were higher in satisfied respondents relative to dissatisfied respondents. The main determinants of job satisfaction were occupation; age; title; income; the career development, and wages and benefits subscales of work stress; and the recognition, responsibility and financial subscales of work motivation. Conclusions The findings indicated considerable room for improvement in job satisfaction among community health workers in Heilongjiang Province in China. Healthcare managers and policymakers should take both work stress and motivation into consideration, as two subscales of work stress and one subscale of work motivation negatively influenced job satisfaction and two subscales of work motivation positively influenced job satisfaction. PMID:24902730

Has Work Replaced Home as a Haven? Re-examining Arlie Hochschild's Time Bind Proposition with Objective Stress Data

PubMed Central

Damaske, Sarah; Smyth, Joshua M.; Zawadzki, Matthew J.

2014-01-01

Using innovative data with objective and subjective measures of stress collected from 122 employed men and women, this paper tests the thesis of the Time Bind by asking whether people report lower stress levels at work than at home. The study finds consistent support for the Time Bind hypothesis when examining objective stress data: when participants were at work they had lower values of the stress hormone cortisol than when they were at home. Two variables moderated this association – income and children at home – such that the work as haven effect was stronger for those with lower incomes and no children living at home. Participants also, however, consistently reported higher subjective stress levels on work days than on non-work days, which is in direct contrast to the Time Bind hypothesis. Although our overall findings support Hochschild's hypothesis that stress levels are lower at work, it appears that combining work and home increases people's subjective experience of daily stress. PMID:24869785

Improvement of the Work Environment and Work-Related Stress: A Cross-Sectional Multilevel Study of a Nationally Representative Sample of Japanese Workers.

PubMed

Watanabe, Kazuhiro; Tabuchi, Takahiro; Kawakami, Norito

2017-03-01

This cross-sectional multilevel study aimed to investigate the relationship between improvement of the work environment and work-related stress in a nationally representative sample in Japan. The study was based on a national survey that randomly sampled 1745 worksites and 17,500 nested employees. The survey asked the worksites whether improvements of the work environment were conducted; and it asked the employees to report the number of work-related stresses they experienced. Multilevel multinominal logistic and linear regression analyses were conducted. Improvement of the work environment was not significantly associated with any level of work-related stress. Among men, it was significantly and negatively associated with the severe level of work-related stress. The association was not significant among women. Improvements to work environments may be associated with reduced work-related stress among men nationwide in Japan.

[A study of work stress and professional commitment in outpatient department nurses].

PubMed

Tsai, Ming-Hsiu; Liu, Meng-Fen; Chen, Yu-Ju; Liu, Cheng-Ching

2012-06-01

Nurses working in outpatient departments face tremendous pressure from multiple sources. The effect of nurse professional commitment on continued professional development is an issue worth exploring further. This study explored relationships among nurses' personal attributes, work stress and professional commitment. The Lazarus cognitive appraisal model framed the research plan design. Tools used included stress level and professional commitment scales for healthcare professionals. Of 180 questionnaires sent to outpatient department nurses nurses, 171 (95%) were returned and used in analysis. SPSS 12.0 for windows software was used for statistical analysis. We found a significant negative correlation between work stress and professional commitment and no significant relationship between level of education and either ability to handle work stress or professional commitment. Years of work experience, age and position all correlated positively with ability to handle work stress. Years of work experience correlated positively with professional commitment. This study suggests that nurses experience the highest work stress levels during their first five years of work. Findings show that providing nurses a clear career development path, in addition to attractive incentives and a reasonable workload, is essential to reducing work stress, bolstering professional commitment and increasing retention.

Work-related stress and reward: an Australian study of multidisciplinary pediatric oncology healthcare providers.

PubMed

Bowden, M J; Mukherjee, S; Williams, L K; DeGraves, S; Jackson, M; McCarthy, M C

2015-11-01

Managing staff stress and preventing long-term burnout in oncology staff are highly important for both staff and patient well-being. Research addressing work-related stress in adult oncology is well documented; however, less is known about this topic in the pediatric context. This study examined sources of work-related stress and reward specific to multidisciplinary staff working in pediatric oncology in Australia. Participants were 107 pediatric oncology clinicians, including medical, nursing, and allied health staff from two Australian pediatric oncology centers. Participants completed an online survey using two newly developed measures: the work stressors scale-pediatric oncology and the work rewards scale-pediatric oncology. The most commonly reported sources of both stress and reward are related to patient care and interactions with children. Results indicated that levels of work-related stress and reward were similar between the professional disciplines and between the two hospitals. Regression analyses revealed no demographic or organizational factors that were associated with either stress or reward. Work-related stress and reward are not mutually exclusive; particular situations and events can be simultaneously stressful and rewarding for healthcare providers. Although patient care and interactions with children was found to be the most stressful aspect of working in this speciality, it was also the greatest source of reward. Results are discussed in relation to workplace approaches to staff well-being and stress reduction. Copyright © 2015 John Wiley & Sons, Ltd.

Genetic variation of transgenerational plasticity of offspring germination in response to salinity stress and the seed transcriptome of Medicago truncatula.

PubMed

Vu, Wendy T; Chang, Peter L; Moriuchi, Ken S; Friesen, Maren L

2015-04-01

Transgenerational plasticity provides phenotypic variation that contributes to adaptation. For plants, the timing of seed germination is critical for offspring survival in stressful environments, as germination timing can alter the environmental conditions a seedling experiences. Stored seed transcripts are important determinants of seed germination, but have not previously been linked with transgenerational plasticity of germination behavior. In this study we used RNAseq and growth chamber experiments of the model legume M. trucantula to test whether parental exposure to salinity stress influences the expression of stored seed transcripts and early offspring traits and test for genetic variation. We detected genotype-dependent parental environmental effects (transgenerational plasticity) on the expression levels of stored seed transcripts, seed size, and germination behavior of four M. truncatula genotypes. More than 50% of the transcripts detected in the mature, ungerminated seed transcriptome were annotated as regulating seed germination, some of which are involved in abiotic stress response and post-embryonic development. Some genotypes showed increased seed size in response to parental exposure to salinity stress, but no parental environmental influence on germination timing. In contrast, other genotypes showed no seed size differences across contrasting parental conditions but displayed transgenerational plasticity for germimation timing, with significantly delayed germination in saline conditions when parental plants were exposed to salinity. In genotypes that show significant transgenerational plastic germination response, we found significant coexpression networks derived from salt responsive transcripts involved in post-transcriptional regulation of the germination pathway. Consistent with the delayed germination response to saline conditions in these genotypes, we found genes associated with dormancy and up-regulation of abscisic acid (ABA). Our results demonstrate genetic variation in transgenerational plasticity within M. truncatula and show that parental exposure to salinity stress influences the expression of stored seed transcripts, seed weight, and germination behavior. Furthermore, we show that the parental environment influences gene expression to modulate biological pathways that are likely responsible for offspring germination responses to salinity stress.

Spatio-temporal variations of stress drop in and around the asperity of the Mw 6.1, 6 April 2009 L'Aquila earthquake.

NASA Astrophysics Data System (ADS)

Calderoni, G.

2015-12-01

We investigate the variability of Brune stress drop in the normal fault system activated by the Mw 6.1 L'Aquila earthquake in the complex tectonic setting of the central Apennine. We re-analyze the dataset used by Calderoni et al. [2013], augmented by additional earthquakes and additional records at closer distance stations. We refine the EGF method used by Calderoni et al. [2013] applying more restrictive criteria in the selection of the EGF events and removing outliers based on statistical criteria. We focus on spatio-temporal variations in the Paganica fault before the mainshock. Using 51 earthquakes (9 foreshocks, the mainshock, and 42 aftershocks), we show that, after the Mw 4.1 largest foreshock of 30 March 2009, the Brune stress drop goes down to the lowest values (0.4 MPa). This largest foreshock was indicated as a marker for the onset of the temporal variations in efficiency of fault-zone guided waves (Calderoni et al., 2015) and other independent seismic parameters such as the b value [Papadopoulos et al., 2010; Sugan et al., 2014], and the P-to-S wave velocity ratio [Di Luccio et al., 2010; Lucente et al., 2010]. The low values of stress drop after the Mw 4.1 foreshock are consistent with the increase of pore pressure invoked by other authors to explain the increase of the Vp/Vs ratio and the decrease of Vs in the damage fault zone. In contrast, immediate foreshocks occurring a few hours before the mainshock very close to its nucleation are characterized by the highest values observed for foreshocks (≈5 MPa). These high stress drop foreshocks are located in the fault patch where a low b value anomaly indicates highly stressed rock before the main shock rupture [Sugan et al., 2014]. These results provide further evidence to previous observations before major earthquakes suggesting that stress drop variations can provide insight into the preparatory phase of impending earthquakes.

Optimization study on structural analyses for the J-PARC mercury target vessel

NASA Astrophysics Data System (ADS)

Guan, Wenhai; Wakai, Eiichi; Naoe, Takashi; Kogawa, Hiroyuki; Wakui, Takashi; Haga, Katsuhiro; Takada, Hiroshi; Futakawa, Masatoshi

2018-06-01

The spallation neutron source at the Japan Proton Accelerator Research Complex (J-PARC) mercury target vessel is used for various materials science studies, work is underway to achieve stable operation at 1 MW. This is very important for enhancing the structural integrity and durability of the target vessel, which is being developed for 1 MW operation. In the present study, to reduce thermal stress and relax stress concentrations more effectively in the existing target vessel in J-PARC, an optimization approach called the Taguchi method (TM) is applied to thermo-mechanical analysis. The ribs and their relative parameters, as well as the thickness of the mercury vessel and shrouds, were selected as important design parameters for this investigation. According to the analytical results of 18 model types designed using the TM, the optimal design was determined. It is characterized by discrete ribs and a thicker vessel wall than the current design. The maximum thermal stresses in the mercury vessel and the outer shroud were reduced by 14% and 15%, respectively. Furthermore, it was indicated that variations in rib width, left/right rib intervals, and shroud thickness could influence the maximum thermal stress performance. It is therefore concluded that the TM was useful for optimizing the structure of the target vessel and to reduce the thermal stress in a small number of calculation cases.

Puff and bite: the relationship between the glucocorticoid stress response and anti-predator performance in checkered puffer (Sphoeroides testudineus).

PubMed

Cull, Felicia; O'Connor, Constance M; Suski, Cory D; Shultz, Aaron D; Danylchuk, Andy J; Cooke, Steven J

2015-04-01

Individual variation in the endocrine stress response has been linked to survival and performance in a variety of species. Here, we evaluate the relationship between the endocrine stress response and anti-predator behaviors in wild checkered puffers (Sphoeroides testudineus) captured at Eleuthera Island, Bahamas. The checkered puffer has a unique and easily measurable predator avoidance strategy, which is to inflate or 'puff' to deter potential predators. In this study, we measured baseline and stress-induced circulating glucocorticoid levels, as well as bite force, a performance measure that is relevant to both feeding and predator defence, and 'puff' performance. We found that puff performance and bite force were consistent within individuals, but generally decreased following a standardized stressor. Larger puffers were able to generate a higher bite force, and larger puffers were able to maintain a more robust puff performance following a standardized stressor relative to smaller puffers. In terms of the relationship between the glucocorticoid stress response and performance metrics, we found no relationship between post-stress glucocorticoid levels and either puff performance or bite force. However, we did find that baseline glucocorticoid levels predicted the ability of a puffer to maintain a robust puff response following a repeated stressor, and this relationship was more pronounced in larger individuals. Our work provides a novel example of how baseline glucocorticoids can predict a fitness-related anti-predator behavior. Copyright © 2015 Elsevier Inc. All rights reserved.

Role of Slip Mode on Stress Corrosion Cracking Behavior

NASA Astrophysics Data System (ADS)

Vasudevan, A. K.; Sadananda, K.

2011-02-01

In this article, we examine the effect of aging treatment and the role of planarity of slip on stress corrosion cracking (SCC) behavior in precipitation-hardened alloys. With aging, the slip mode can change from a planar slip in the underage (UA) to a wavy slip in the overage (OA) region. This, in turn, results in sharpening the crack tip in the UA compared to blunting in the OA condition. We propose that the planar slip enhances the stress concentration effects by making the alloys more susceptible to SCC. In addition, the planarity of slip enhances plateau velocities, reduces thresholds for SCC, and reduces component life. We show that the effect of slip planarity is somewhat similar to the effects of mechanically induced stress concentrations such as due to the presence of sharp notches. Aging treatment also causes variations in the matrix and grain boundary (GB) microstructures, along with typical mechanical and SCC properties. These properties include yield stress, work hardening rate, fracture toughness K IC , thresholds K Iscc, and steady-state plateau velocity ( da/ dt). The SCC data for a wide range of ductile alloys including 7050, 7075, 5083, 5456 Al, MAR M steels, and solid solution copper-base alloys are collected from the literature. Our assertion is that slip mode and the resulting stress concentration are important factors in SCC behavior. This is further supported by similar observations in many other systems including some steels, Al alloys, and Cu alloys.

Moderating effects of coping on work stress and job performance for nurses in tertiary hospitals: a cross-sectional survey in China.

PubMed

Li, Li; Ai, Hua; Gao, Lei; Zhou, Hao; Liu, Xinyan; Zhang, Zhong; Sun, Tao; Fan, Lihua

2017-06-12

Work stress is a major problem for nurses and it can negatively influence job performance. Therefore, it is critical to explore variables that can reduce or buffer the negative effects of work stress. This study explores the moderating effects of coping strategies on the relationship between work stress and job performance for nurses in China. A cross-sectional survey of 852 nurses from four tertiary hospitals in Heilongjiang Province, China, was conducted in 2013. Descriptive statistics were reported for socioeconomic status and demographic characteristics, level of work stress, coping strategies, and job performance. Regression analysis was conducted to test the interaction between work stress and coping strategies on job performance. Three subscales of work stress were negatively related to job performance. Positive coping strategies moderated Patient Care and job performance while negative coping strategies moderated Workload and Time and performance, and between Working Environment and Resources and performance. Positive coping strategies reduce or buffer the negative effects of work stress on job performance and negative coping strategies increased the negative effects.

Association between psychosomatic symptoms and work stress among Taiwan police officers.

PubMed

Chueh, Ke-Hsin; Yen, Cheng-Fang; Lu, Luo; Yang, Mei-Sang

2011-04-01

The aim of the study was to explore the association between the severity of psychosomatic symptoms and perceived work stress among male police officers in southern Taiwan. By stratified random sampling, a total of 698 male police officers were recruited into this study (the response rate was 73.4%; 512 of 698). A structured self-administered questionnaire on demographic and working characteristics, the severity of psychosomatic symptoms, perceived work stress, and social support was used to collect data anonymously. The results of multiple regression analysis revealed that (1) the police officers who perceived high-work stress reported more severe psychosomatic symptoms than those who perceived low-work stress; and (2) perceived social support had a moderating effect on the association between severity of psychosomatic symptoms and perceived work stress. Perceived work stress is an indicator of psychosomatic symptoms in police officers. Strategies for reducing psychosomatic symptoms of police officers include police administrators taking into account the level of work stress as well as more attention being paid to the resources of social support. Copyright © 2011 Elsevier Taiwan LLC. All rights reserved.

Bidirectional relations between work-related stress, sleep quality and perseverative cognition.

PubMed

Van Laethem, Michelle; Beckers, Debby G J; Kompier, Michiel A J; Kecklund, Göran; van den Bossche, Seth N J; Geurts, Sabine A E

2015-11-01

In this longitudinal two-wave study, bidirectional relations between work-related stress and sleep quality were examined. Moreover, it was investigated whether perseverative cognition is a potential underlying mechanism in this association, related to both work-related stress and sleep quality. A randomly selected sample of Dutch employees received an online survey in 2012 and 2013. Of all invited employees, 877 participated in both waves. Structural equation modeling was performed to analyze the data. We found evidence for reversed relations between work-related stress and sleep quality. Specifically, when controlling for perseverative cognition, work-related stress was not directly related to subsequent sleep quality, but low sleep quality was associated with an increase in work-related stress over time. Moreover, negative bidirectional associations over time were found between perseverative cognition and sleep quality, and positive bidirectional associations were found between work-related stress and perseverative cognition. Lastly, a mediation analysis showed that perseverative cognition fully mediated the relationship between work-related stress and sleep quality. The study findings suggest that perseverative cognition could be an important underlying mechanism in the association between work-related stress and sleep quality. The bidirectionality of the studied relationships could be an indication of a vicious cycle, in which work-related stress, perseverative cognition, and sleep quality mutually influence each other over time. Copyright © 2015 Elsevier Inc. All rights reserved.

Understanding work related musculoskeletal pain: does repetitive work cause stress symptoms?

PubMed

Bonde, J P; Mikkelsen, S; Andersen, J H; Fallentin, N; Baelum, J; Svendsen, S W; Thomsen, J F; Frost, P; Kaergaard, A

2005-01-01

Pain in the neck and upper extremity is reported with high frequency in repetitive work. Mechanical overload of soft tissues seems a plausible mechanism, but psychological factors have received considerable attention during the past decade. If psychological factors are important for development of regional pain in repetitive work, stress symptoms would likely be on the causal path. To examine whether objective measures of repetitive monotonous work are related to occurrence and development of stress symptoms. In 1994-95, 2033 unskilled workers with continuous repetitive work and 813 workers with varied work were enrolled. Measures of repetitiveness and force requirements were quantified using video observations to obtain individual exposure estimates. Stress symptoms were recorded at baseline and after approximately one, two, and three years by the Setterlind Stress Profile Inventory. Repetitive work, task cycle time, and quantified measures of repetitive upper extremity movements including force requirements were not related to occurrence of stress symptoms at baseline or development of stress symptoms during three years of follow up. The findings do not indicate that repetitive work is associated with stress symptoms, but small effects cannot be ruled out. Thus the results question the importance of mental stress mechanisms in the causation of regional pain related to repetitive work. However, the findings should be interpreted with caution because the stress inventory has not been validated against a gold standard.

Elastic and viscoelastic model of the stress history of sedimentary rocks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warpinski, N.R.

A model has been developed to calculate the elastic and viscoelastic stresses which develop in rocks at depth due to burial, uplift and diagenesis. This model includes the effect of the overburden load, tectonic or geometric strains, thermal strains, varying material properties, pore pressure variations, and viscoeleastic relaxation. Calculations for some simple examples are given to show the contributions of the individual stress components due to gravity, tectonics, thermal effects and pore pressure. A complete stress history for Mesaverde rocks in the Piceance basin is calculated based on available burial history, thermal history and expected pore pressure, material property andmore » tectonic strain variations through time. These calculations show the importance of including material property changes and viscoelastic effects. 15 refs., 48 figs.« less

Management of work-related stress by Finnish occupational physicians.

PubMed

Kinnunen-Amoroso, M; Liira, J

2013-07-01

Occupational stress is a serious threat to the well-being of employees and organizations and may cause ill-health and loss of productivity. Determining the methods that occupational health (OH) services and employers use to manage work-related stress can help to detect both barriers and facilitating factors for effective stress management. To examine stress management methods used by OH physicians in Finland. Anonymous, self-administered e-mail questionnaire to Finnish OH physicians. A total of 222 OH physicians responded. Neither OH services nor their client organizations used standardized tools to assess or manage work-related stress. Work-related stress was assessed using patient interviews. Physicians reported that the main method used to manage occupational stress was supporting the individual employee. Half of the physicians attempted to involve workplaces in stress management by asking their patients to contact their supervisors regarding stress issues. In order to tackle work-related stress consistently and effectively employers and OH services should have agreed standardized protocols for managing stress in the workplace.

Natural variation reveals relationships between pre-stress carbohydrate nutritional status and subsequent responses to xenobiotic and oxidative stress in Arabidopsis thaliana.

PubMed

Ramel, Fanny; Sulmon, Cécile; Gouesbet, Gwenola; Couée, Ivan

2009-12-01

Soluble sugars are involved in responses to stress, and act as signalling molecules that activate specific or hormone cross-talk transduction pathways. Thus, exogenous sucrose treatment efficiently induces tolerance to the herbicide atrazine in Arabidopsis thaliana plantlets, at least partially through large-scale modifications of expression of stress-related genes. Availability of sugars in planta for stress responses is likely to depend on complex dynamics of soluble sugar accumulation, sucrose-starch partition and organ allocation. The question of potential relationships between endogenous sugar levels and stress responses to atrazine treatment was investigated through analysis of natural genetic accessions of A. thaliana. Parallel quantitative and statistical analysis of biochemical parameters and of stress-sensitive physiological traits was carried out on a set of 11 accessions. Important natural variation was found between accessions of A. thaliana in pre-stress shoot endogenous sugar levels and responses of plantlets to subsequent atrazine stress. Moreover, consistent trends and statistically significant correlations were detected between specific endogenous sugar parameters, such as the pre-stress end of day sucrose level in shoots, and physiological markers of atrazine tolerance. These significant relationships between endogenous carbohydrate metabolism and stress response therefore point to an important integration of carbon nutritional status and induction of stress tolerance in plants. The specific correlation between pre-stress sucrose level and greater atrazine tolerance may reflect adaptive mechanisms that link sucrose accumulation, photosynthesis-related stress and sucrose induction of stress defences.

Job related stress among nurses working in Jimma Zone public hospitals, South West Ethiopia: a cross sectional study.

PubMed

Dagget, Tadesse; Molla, Ashagre; Belachew, Tefera

2016-01-01

Occupational stress exists in every profession, nevertheless, the nursing profession appears to experience more stress at work compared to other health care workers. Unmanaged stress leads to high levels of employee dissatisfaction, illness, absenteeism, high turnover, and decreased productivity that compromise provision of quality service to clients. However, there is a scarcity of information about nurses' job stress in Jimma zone public hospital nurses. The aim of the present study was to assess job related stress and its predictors among nurses working in Jimma Zone public hospitals, South-West Ethiopia in 2014. An institution based cross sectional study was conducted from March 10 to April 10, 2014 through a census of nurses who are working in Jimma Zone public hospitals using a structured self-administered questionnaire. SPSS Statistics Version 20 used. For the outcome variable: overall job related stress, the participant's responses on each item score summed: a stress score ranging from a minimum of 26 and maximum score of 116. The higher the sum the more the stressed the nurse. The level of stress calculated through tertial the lower to low stress, the middle to moderate & the higher to high stress. Moreover, bivariate and multivariable linear regressions done to see the association between the predictor (sex, age, mutual understanding at work, Job satisfaction and working unit/department) and the outcome variable (Job related stress). A total of 341 nurses working in Jimma Zone public hospitals were given the questionnaire, and the response rate was 92.3 % (315). This study indicated an average overall job related stress level of 58.46 ± 12.62. The highest level of job related stress was on the sub scale of dealing with death & dying mean score of 62.94 % followed by uncertainty regarding patient treatment 57.72 % and workload 57.6 %. While job related stress from sexual harassment had the lowest mean score of 46.19 %. Overall job related stress varies across working unit. Working in a chronic illness follow up clinic, the mutual understanding at work between nurse & physician and job satisfaction were negatively associated predictors of job related stress.

Morphological and Biological alteration of maize root architectures on drought stress

USDA-ARS?s Scientific Manuscript database

Drought tolerance is a complex agronomic trait and root characteristics logically play an important role in determining the response of plants to drought stress. Studies were conducted to investigate genotypic variations in morphological and physiological responses of roots to drought stress in corn...

Morphological and biological alteration of maize root architectures on drought stress

USDA-ARS?s Scientific Manuscript database

Drought tolerance is a complex agronomic trait and root characteristics logically play an important role in determining the response of plants to drought stress. Studies were conducted to investigate genotypic variations in morphological and physiological responses of roots to drought stress in corn...

Ground Motion Prediction Equations Empowered by Stress Drop Measurement

NASA Astrophysics Data System (ADS)

Miyake, H.; Oth, A.

2015-12-01

Significant variation of stress drop is a crucial issue for ground motion prediction equations and probabilistic seismic hazard assessment, since only a few ground motion prediction equations take into account stress drop. In addition to average and sigma studies of stress drop and ground motion prediction equations (e.g., Cotton et al., 2013; Baltay and Hanks, 2014), we explore 1-to-1 relationship for each earthquake between stress drop and between-event residual of a ground motion prediction equation. We used the stress drop dataset of Oth (2013) for Japanese crustal earthquakes ranging 0.1 to 100 MPa and K-NET/KiK-net ground motion dataset against for several ground motion prediction equations with volcanic front treatment. Between-event residuals for ground accelerations and velocities are generally coincident with stress drop, as investigated by seismic intensity measures of Oth et al. (2015). Moreover, we found faster attenuation of ground acceleration and velocities for large stress drop events for the similar fault distance range and focal depth. It may suggest an alternative parameterization of stress drop to control attenuation distance rate for ground motion prediction equations. We also investigate 1-to-1 relationship and sigma for regional/national-scale stress drop variation and current national-scale ground motion equations.

Work and Family: Satisfaction, Stress, and Spousal Support.

ERIC Educational Resources Information Center

Phillips-Miller, Dianne L.; Campbell, N. Jo; Morrison, Charles R.

2000-01-01

Married veterinarians were surveyed about work satisfaction, work-related stress, marital-family stress, and spousal support for their career. Female veterinarians reported greater effect of martial/family stress on career and less perceived support than did their male counterparts. Areas of greatest work dissatisfaction for both genders were…

The Culture-Work-Health Model and Work Stress.

ERIC Educational Resources Information Center

Peterson, Michael; Wilson, John F.

2002-01-01

Examines the role of organizational culture in the etiology of workplace stress through the framework of the Culture-Work- Health model. A review of relevant business and health literature indicates that culture is an important component of work stress and may be a key to creating effective organizational stress interventions. (SM)

A year in transition: a qualitative study examining the trajectory of first year residents’ well-being

PubMed Central

2013-01-01

Background It is generally understood that trainees experience periods of heightened stress during first year residency, yet there is little information on variations in stress and well-being over the transition period or those factors that contribute to these variations. This qualitative study explored the trajectory of well-being described by first year residents in the context of challenges, supports and adaptations over time. Methods In-depth interviews were conducted face-to-face with 17 first year residents at the University of Toronto. Participants drew a graph of their well-being over the course of their first year and described critical periods of challenge and adaptation. Interviews were audio-taped and transcribed. Results were organized into a thematic analysis using NVivo software. Results Residents described a pattern of well-being that varied in accordance with changes in rotations. Well-being increased when residents perceived high levels of team support, felt competent and experienced valued learning opportunities. Well-being decreased with low team support, heavy work demands, few learning opportunities and poor orientations. Anxiety and excitement in the beginning of the year gave way to heightened confidence but increased fatigue and apathy towards the year’s end. Residents used a number of cognitive, behavioural and self-care strategies to cope with transitional challenges. Conclusions Residents experienced a pattern of highly fluctuating well-being that coincided with changes in rotations. Residents’ well-being varied according to levels of supervisor and colleague support, learning opportunities, and work demands. Residents’ well-being may be improved by program interventions that facilitate better team and supervisory supports, maintain optimal service to learning ratios, establish effective fatigue and risk management systems, offer wellness support services and integrate skills based resiliency training into the curriculum. PMID:23842470

ADRA2B Deletion Variant Influences Time-Dependent Effects of Pre-Learning Stress on Long-Term Memory

PubMed Central

Zoladz, Phillip R.; Dailey, Alison M.; Nagle, Hannah E.; Fiely, Miranda K.; Mosley, Brianne E.; Brown, Callie M.; Duffy, Tessa J.; Scharf, Amanda R.; Earley, McKenna B.; Rorabaugh, Boyd R.

2017-01-01

Extensive work over the past few decades has shown that certain genetic variations interact with life events to confer increased susceptibility for the development of psychological disorders. The deletion variant of the ADRA2B gene, which has been associated with enhanced emotional memory and heightened amygdala responses to emotional stimuli, might confer increased susceptibility for the development of post-traumatic stress disorder (PTSD) or related phenotypes by increasing the likelihood of traumatic memory formation. Thus, we examined whether this genetic variant would predict stress effects on learning and memory in a non-clinical sample. Two hundred and thirty-five individuals were exposed to the socially evaluated cold pressor test or a control condition immediately or 30 min prior to learning a list of words that varied in emotional valence and arousal level. Participants’ memory for the words was tested immediately (recall) and 24 h after learning (recall and recognition), and saliva samples were collected to genotype participants for the ADRA2B deletion variant. Results showed that stress administered immediately before learning selectively enhanced long-term recall in deletion carriers. Stress administered 30 min before learning impaired recognition memory in male deletion carriers, while enhancing recognition memory in female deletion carriers. These findings provide additional evidence to support the idea that ADRA2B deletion variant carriers retain a sensitized stress response system, which results in amplified effects of stress on learning and memory. The accumulating evidence regarding this genetic variant implicates it as a susceptibility factor for traumatic memory formation and PTSD-related phenotypes. PMID:28254464

Perceived work stress, imbalance between work and family/personal lives, and mental disorders.

PubMed

Wang, Jian Li

2006-07-01

Occupational mental health research has been focusing on the relationship between work stress and depression. However, the impacts of work stress on anxiety disorders and of imbalance between work and family life on workers' mental health have not been well studied. This analysis investigated the association between levels of perceived work stress and of imbalance between work and family/personal lives and current mood/anxiety disorders. This was a cross-sectional study using data from the Canadian Community Health Survey-Mental Health and Well-being (CCHS-1.2) (n=36,984). Mood and anxiety disorders were measured using the World Mental Health-Composite International Diagnostic Interview. The 1-month prevalence of mood and anxiety disorders among those with a work stress score at the 75th percentile value and above was 3.6% and 4.0%. Among those who reported that their work and family/personal lives "never" balanced in the past month, the 1-month prevalence of mood and anxiety disorders was 21.2% and 17.9%. In multivariate analyses, work stress and imbalance between work and family/personal lives were independently associated with mood and anxiety disorders. There was no evidence that perceived work stress interacted with imbalance between work and family/personal lives to increase the likelihood of having mental disorders. Gender was associated with anxiety disorders, but not with major depressive disorder and mood disorders. Work stress and imbalance between work and family/personal lives may be part of the etiology of mood and anxiety disorders in the working population. Community based longitudinal studies are needed to delineate the causal relationships among work stress, imbalance between work and family/personal lives and mental disorders.

Work stress and reduced health in young physicians: prospective evidence from Swiss residents.

PubMed

Buddeberg-Fischer, Barbara; Klaghofer, Richard; Stamm, Martina; Siegrist, Johannes; Buddeberg, Claus

2008-10-01

Job stress, investigated by the effort-reward model in various working environments in different countries, has been widely reported, yet studies addressing physicians are lacking. The present study investigated the perceived job stress, its association with the amount of working hours, and its impact on young physicians' self-reported health and their satisfaction with life during residency. In a prospective study design, a cohort of Swiss medical school graduates was followed up, beginning in 2001. In their second and fourth years of residency, 433 physicians assessed their effort-reward imbalance, overcommitment, physical and mental well-being and satisfaction in life. Taking the longitudinal design into account, four categories of stressed residents were defined: (1) subjects not reporting high work stress at either measurement, (2) subjects reporting high work stress in the second but not in the fourth year of residency, (3) subjects with onset of high work stress in fourth year and (4) residents reporting high work stress at both measurements. All components of the perceived stress at work were significantly correlated with the amount of working hours, effort showing the highest correlation. While two-thirds of the participants do not report high work stress, assessed by the extrinsic part of the effort-reward imbalance model (the ratio between effort and reward) and 12% show a decrease of stress over time, there are 15% with an increase of stress over time, and 10% with persistently high stress experience. In terms of the intrinsic stress component (overcommitment), 71% show low values, 12% show a decrease, 9% an increase and 8% constantly high values. The groups with constant and increasing extrinsic and intrinsic stress experience exhibit significantly worse health and life satisfaction compared to the remaining groups, after controlling for gender and baseline health. Stress at work in young physicians, especially when being experienced over a longer period in postgraduate training, has to be a matter of concern because of its negative impact on health and life satisfaction and the risk of developing symptoms of burnout in the long run.

Work-related stress in the veterinary profession in New Zealand.

PubMed

Gardner, D H; Hini, D

2006-06-01

To investigate sources of work-related stress in the veterinary profession in New Zealand, perceptions of levels of stress being experienced, and the social support that veterinarians are using to manage work-related stress. A postal survey was distributed to 1,907 veterinarians registered with the Veterinary Council of New Zealand (VCNZ). The survey collected information on respondents' age, gender, type and number of people in the workplace, stress levels, depression, suicidal thoughts and attempts, causes of stress and sources of support. Nine hundred and twenty-seven (48.6%) veterinarians returned useable responses. Veterinarians who were retired, working overseas or did not provide information about their type of work were excluded from the analysis, leaving data from 849 (44.5%) veterinarians. Women experienced more work-related stress and depression than men, veterinarians in small animal/mixed practice reported more stress and depression than those in other types of work, and younger veterinarians experienced higher levels of stress than older veterinarians. The main sources of stress were hours worked, client expectations, and unexpected outcomes. Respondents were also stressed by the need to keep up their knowledge and technical skills, and by personal relationships, finances and their expectations of themselves. Most respondents reported that they had good networks of family and friends to help them deal with stress. In general, respondents tended to rely on informal networks such as family and friends, other veterinarians and workmates to provide support. The small proportion of respondents who reported clinical depression or suicidal thoughts or attempts were more likely than respondents in general to have used health professionals, counselling, pastoral/spiritual support and the Vets in Stress phone line, but less likely to have sought support from employers and workmates. There is a need for a wide range of strategies to manage work-related stress among veterinarians. Sources of stress in the workplace must be identified and strategies developed to control those which present a significant hazard. Strategies may include attention to workloads and working hours, design of work processes, and increasing social support. Training in work-related skills such as communication, conflict management and stress management may be helpful where lack of these skills is contributing to stress. Support services such as help lines and mentor schemes are also available and information about these needs to be more accessible.

Trench motion-controlled slab morphology and stress variations: Implications for the isolated 2015 Bonin Islands deep earthquake

NASA Astrophysics Data System (ADS)

Yang, Ting; Gurnis, Michael; Zhan, Zhongwen

2017-07-01

The subducted old and cold Pacific Plate beneath the young Philippine Sea Plate at the Izu-Bonin trench over the Cenozoic hosts regional deep earthquakes. We investigate slab morphology and stress regimes under different trench motion histories with mantle convection models. Viscosity, temperature, and deviatoric stress are inherently heterogeneous within the slab, which we link to the occurrence of isolated earthquakes. Models expand on previous suggestions that observed slab morphology variations along the Izu-Bonin subduction zone, exhibited as shallow slab dip angles in the north and steeper dip angles in the south, are mainly due to variations in the rate of trench retreat from the north (where it is fast) to the south (where it is slow). Geodynamic models consistent with the regional plate tectonics, including oceanic plate age, plate convergence rate, and trench motion history, reproduce the seismologically observed principal stress direction and slab morphology. We suggest that the isolated 680 km deep, 30 May 2015 Mw 7.9 Bonin Islands earthquake, which lies east of the well-defined Benioff zone and has its principal compressional stress direction oriented toward the tip of the previously defined Benioff zone, can be explained by Pacific slab buckling in response to the slow trench retreat.

Effect of temperature on the permeability of gas adsorbed coal under triaxial stress conditions

NASA Astrophysics Data System (ADS)

Li, Xiangchen; Yan, Xiaopeng; Kang, Yili

2018-04-01

The combined effects of gas sorption, stress and temperature play a significant role in the changing behavior of gas permeability in coal seams. The effect of temperature on nitrogen and methane permeability of naturally fractured coal is investigated. Coal permeability, P-wave velocity and axial strain were simultaneously measured under two effective stresses and six different temperatures. The results showed that the behavior of nitrogen and methane permeability presented nonmonotonic changes with increasing temperature. The variation in the P-wave velocity and axial strain showed a good correspondence with coal permeability. A higher effective stress limited the bigger deformation and caused the small change in permeability. Methane adsorption and desorption significantly influence the mechanical properties of coal and play an important role in the variations in coal permeability. The result of coal permeability during a complete stress-strain process showed that the variation in permeability is determined by the evolution of the internal structure. The increase in the temperature of the gas saturated coal causes the complex interaction between matrix swelling, matrix shrinkage and micro-fracture generation, which leads to the complex changes in coal structure and permeability. These results are helpful to understand the gas transport mechanism for exploiting coal methane by heat injection.

The generation of thermal stress and strain during quenching

NASA Astrophysics Data System (ADS)

Soomro, A. B.

A viscoelastic-plastic mathematical model was used to calculate the thermal stress and strain generated during the quenching of an infinite plate of high hardenability steel (835M30) in water, oil and Polymer. In the present work the mathematical model was modified to include the effect of initial stress on the rate of stress relaxation, which has been found to be significant. The data required to incorporate this effect into the calculations, were obtained experimentally during the-.present investigation. The effect of an applied stress during transformation (transformation plasticity) was also introduced in the mathematical model. The new model produced a marked improvement in the degree of agreement between the calculated and experimental residual stress, although the corresponding level of agreement in the case of residual strain was less good. In particular, strains after water quenching agreed less well with experiment as a consequence of the change in the model, although this drawback was not found after oil and polymer quenching. The new mathematical model was used to investigate the effect of martempering, section size and transformation temperature range on the generation of thermal stress and strain. A salt bath treatment above the Ms temperature followed by air cooling prevented residual stress development, but an oil quench after the salt bath treatment generated a level of residual stress at the end of cooling that was similar to that obtained after a direct oil quench from 850°C. Neither martempering process was successful in reducing residual strain.With.an increase in section size a reduction in the residual stress and an increase in the distortions was obtained after a water quench. However, after oil quenching the overall effect of section size on residual stress and strain was small. The effect of variation in the transformation temperature range was found to be small in the case of residual stress but an increase in Ms temperature produced a significant increase in the level of residual strain.

Effects of work stress on work-related rumination, restful sleep, and nocturnal heart rate variability experienced on workdays and weekends.

PubMed

Vahle-Hinz, Tim; Bamberg, Eva; Dettmers, Jan; Friedrich, Niklas; Keller, Monika

2014-04-01

The present study reports the lagged effects of work stress on work-related rumination, restful sleep, and nocturnal heart rate variability experienced during both workdays and weekends. Fifty employees participated in a diary study. Multilevel and regression analyses revealed a significant relationship between work stress measured at the end of a workday, work-related rumination measured during the evening, and restful sleep measured the following morning. Work stress, measured as the mean of 2 consecutive workdays, was substantially but not significantly related to restful sleep on weekends. Work stress was unrelated to nocturnal heart rate variability. Work-related rumination was related to restful sleep on weekends but not on workdays. Additionally, work-related rumination on weekends was positively related to nocturnal heart rate variability during the night between Saturday and Sunday. No mediation effects of work stress on restful sleep or nocturnal heart rate variability via work-related rumination were confirmed.

Self-efficacy, stress, and acculturation as predictors of first year science success among Latinos at a South Texas university

NASA Astrophysics Data System (ADS)

McNamara, Mark W.

The study tested the hypothesis that self-efficacy, stress, and acculturation are useful predictors of academic achievement in first year university science, independent of high school GPA and SAT scores, in a sample of Latino students at a South Texas Hispanic serving institution of higher education. The correlational study employed a mixed methods explanatory sequential model. The non-probability sample consisted of 98 university science and engineering students. The study participants had high science self-efficacy, low number of stressors, and were slightly Anglo-oriented bicultural to strongly Anglo-oriented. As expected, the control variables of SAT score and high school GPA were statistically significant predictors of the outcome measures. Together, they accounted for 19.80% of the variation in first year GPA, 13.80% of the variation in earned credit hours, and 11.30% of the variation in intent to remain in the science major. After controlling for SAT scores and high school GPAs, self-efficacy was a statistically significant predictor of credit hours earned and accounted for 5.60% of the variation; its unique contribution in explaining the variation in first year GPA and intent to remain in the science major was not statistically significant. Stress and acculturation were not statistically significant predictors of any of the outcome measures. Analysis of the qualitative data resulted in six themes (a) high science self-efficacy, (b) stressors, (c) positive role of stress, (d) Anglo-oriented, (e) bicultural, and (f) family. The quantitative and qualitative results were synthesized and practical implications were discussed.

Psychological stress in undergraduate dental students: baseline results from seven European dental schools.

PubMed

Humphris, Gerry; Blinkhorn, Andy; Freeman, Ruth; Gorter, Ronald; Hoad-Reddick, Gillian; Murtomaa, Heikki; O'Sullivan, Robin; Splieth, Christian

2002-02-01

To determine the degree of psychological distress, the experience of emotional exhaustion, and the extent of stress associated with course work in dental students and to compare these measurements among seven European dental schools. Multi-centred survey. Dental Schools at Amsterdam, Belfast, Cork, Greifswald, Helsinki, Liverpool and Manchester. 333 undergraduate first-year dental students. General Health Questionnaire (GHQ12), Maslach Burnout Inventory (MBI), Dental Environment Stress Questionnaire (DES), demographic variables. Questionnaire administered to all students attending first year course. Completed questionnaires sent to central office for processing. Seventy-nine percent of the sampled students responded. Over a third of the students (36%) reported significant psychological distress (morbidity) at the recommended cut-off point (>3 on GHQ). These scores were similar to those reported for medical undergraduates. Twenty-two percent recorded comparatively high scores on emotional exhaustion. A wide variation in these 2 measurements was found across schools (p's<0.001). Stress levels indicated by the DES were less variable (p>0.5). Some evidence showed that contact with patients and the level of support afforded by living at home may be protective. Higher than expected levels of emotional exhaustion were found in a large sample of first-year undergraduate dental students in Europe.

Association between stress and blood pressure variation in a Caribbean population.

PubMed

Hutchinson, J

1986-09-01

Based on the work of Selye (The Stress of Life, New York: McGraw-Hill, 1976) it is hypothesized that stress can produce physiological abnormalities, i.e., elevated blood pressure, and that social variables can be used as indicators or risk factors for disease. It is theorized that deviations from acceptable social patterns or traditional life-styles can produce stressful conditions that are associated with disease and that these situations can be demonstrated by examination of certain social characteristics. This association is examined among the Black Caribs of St. Vincent, West Indies. The social variables included in this analysis are marital status (single, married, widowed, or separated), frequency of church attendance (frequently, sometimes, seldom, or never), years of education, and number of children (for women only). The findings show that single individuals have higher pressures than married subjects and that males who never attend church have higher pressures than men who frequently attend church; a relationship was not demonstrated for females. Among males, as the years of education increased, blood pressure also increased, but for females, increased education was associated with lower pressures. Family size was not associated with systolic or diastolic pressure. The analysis of these selected social variables suggests that these variables influence male systolic and diastolic pressures, but only female diastolic pressure.

The effect of spherical nanoparticles on rheological properties of bi-dispersed magnetorheological fluids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kannappan, K. Thiruppathi, E-mail: thiruppathi.ka@gmail.com; Laherisheth, Zarana; Parekh, Kinnari

2015-06-24

In the present investigation, the rheological properties of bi-dispersed magnetorheological (MR) fluid based on Fe{sub 3}O{sub 4} nanosphere and microsphere of iron particles are experimentally investigated. The MR fluid is prepared by substituting nanosphere of 40nm Fe{sub 3}O{sub 4} particles in MR fluids having microsphere iron particles (7-8 μm). Three different weight fractions (0%, 1% and 3%) of nanosphere-microsphere MR fluids are synthesized. In the absence of the magnetic field, substitution of magnetic nanosphere decreases the viscosity lower than without substituted sample at high as well as low shear rate. Upon the application of the magnetic field, the particles alignmore » along the direction of the field, which promotes the yield stress. Here too the yield stress value decreases with magnetic nanosphere substitution. This behaviour is explain based on the inter-particle interaction as well as formation of nanosphere cloud around the magnetic microsphere, which effectively reduces the viscosity and works as weak point when chains are formed. Variation of dynamic yield stress with magnetic field is explained using microscopic model. In any event such fluid does not sediment and is not abrasive so it could be useful if not too high yield stress is needed.« less

Coral seas in fifty years: Need for local policies

NASA Astrophysics Data System (ADS)

Longley, P.; Cheng, N. S.; Fontaine, R. M.; Horton, K.; Bhattacharya, A.

2017-12-01

Arising stressors from both global and local sources threaten coral reefs, with studies indicating that local and global sources might reduce coral resilience. Local sources include sediment stress and nutrient stress from fishing; global sources include increasing sea surface temperature and ocean acidification. Through an in-depth review and re-analysis of published work, conducted under the scope of a course in the spring of 2017 semester and follow up research over the summer of 2017 and fall of 2017, students in Environmental Studies Course, ENVS 4100: Coral reefs, at the University of Colorado Boulder have developed a framework to initiate a discussion of global and local policies focused on protection of coral reefs. The research aims to assess current threats and suggest mitigation efforts. The paper uses secondary research to analyze impact of ocean acidification on aragonite saturation levels, current thermal stress, nutrient stress, and sediment factors that influence the health of coral and its surrounding ecosystem over the Common Era. Case studies in this paper include the Caribbean and Red Sea coral reefs, due to the variation of the atmosphere, temperature, and human activity in these regions. This paper intends to offer sufficient evidence that will lead to appropriate policy decisions that pertain to reef conservation.

Automatic Detection of Regions in Spinach Canopies Responding to Soil Moisture Deficit Using Combined Visible and Thermal Imagery

PubMed Central

Raza, Shan-e-Ahmed; Smith, Hazel K.; Clarkson, Graham J. J.; Taylor, Gail; Thompson, Andrew J.; Clarkson, John; Rajpoot, Nasir M.

2014-01-01

Thermal imaging has been used in the past for remote detection of regions of canopy showing symptoms of stress, including water deficit stress. Stress indices derived from thermal images have been used as an indicator of canopy water status, but these depend on the choice of reference surfaces and environmental conditions and can be confounded by variations in complex canopy structure. Therefore, in this work, instead of using stress indices, information from thermal and visible light imagery was combined along with machine learning techniques to identify regions of canopy showing a response to soil water deficit. Thermal and visible light images of a spinach canopy with different levels of soil moisture were captured. Statistical measurements from these images were extracted and used to classify between canopies growing in well-watered soil or under soil moisture deficit using Support Vector Machines (SVM) and Gaussian Processes Classifier (GPC) and a combination of both the classifiers. The classification results show a high correlation with soil moisture. We demonstrate that regions of a spinach crop responding to soil water deficit can be identified by using machine learning techniques with a high accuracy of 97%. This method could, in principle, be applied to any crop at a range of scales. PMID:24892284

Modeling and Studying the Effect of Texture and Elastic Anisotropy of Copper Microstructure in Nanoscale Interconnects on Reliability in Integrated Circuits

NASA Astrophysics Data System (ADS)

Basavalingappa, Adarsh

Copper interconnects are typically polycrystalline and follow a lognormal grain size distribution. Polycrystalline copper interconnect microstructures with a lognormal grain size distribution were obtained with a Voronoi tessellation approach. The interconnect structures thus obtained were used to study grain growth mechanisms, grain boundary scattering, scattering dependent resistance of interconnects, stress evolution, vacancy migration, reliability life times, impact of orientation dependent anisotropy on various mechanisms, etc. In this work, the microstructures were used to study the impact of microstructure and elastic anisotropy of copper on thermal and electromigration induced failure. A test structure with copper and bulk moduli values was modeled to do a comparative study with the test structures with textured microstructure and elastic anisotropy. By subjecting the modeled test structure to a thermal stress by ramping temperature down from 400 °C to 100 °C, a significant variation in normal stresses and pressure were observed at the grain boundaries. This variation in normal stresses and hydrostatic stresses at the grain boundaries was found to be dependent on the orientation, dimensions, surroundings, and location of the grains. This may introduce new weak points within the metal line where normal stresses can be very high depending on the orientation of the grains leading to delamination and accumulation sites for vacancies. Further, the hydrostatic stress gradients act as a driving force for vacancy migration. The normal stresses can exceed certain grain orientation dependent critical threshold values and induce delamination at the copper and cap material interface, thereby leading to void nucleation and growth. Modeled test structures were subjected to a series of copper depositions at 250 °C followed by copper etch at 25 °C to obtain initial stress conditions. Then the modeled test structures were subjected to 100,000 hours ( 11.4 years) of simulated thermal stress at an elevated temperature of 150 °C. Vacancy migration due to concentration gradients, thermal gradients, and mechanical stress gradients were considered under the applied thermal stress. As a result, relatively high concentrations of vacancies were observed in the test structure due to a driving force caused by the pressure gradients resulting from the elastic anisotropy of copper. The grain growth mechanism was not considered in these simulations. Studies with two grain analysis demonstrated that the stress gradients developed will be severe when (100) grains are adjacent to (111) grains, therefore making them the weak points for potentially reliability failures. Ilan Blech discovered that electromigration occurs above a critical product of the current density and metal length, commonly referred as Blech condition. Electromigration stress simulations in this work were carried out by subjecting test structures to scaled current densities to overcome the Blech condition of (jL)crit for small dimensions of test structure and the low temperature stress condition used. Vacancy migration under the electromigration stress conditions was considered along with the vacancy migration induced stress evolution. A simple void growth model was used which assumes voids start to form when vacancies reach a critical level. Increase of vacancies in a localized region increases the resistance of the metal line. Considering a 10% increase in resistance as a failure criterion, the distributions of failure times were obtained for given electromigration stress conditions. Bimodal/multimodal failure distributions were obtained as a result. The sigma values were slightly lower than the ones commonly observed from experiments. The anisotropy of the elastic moduli of copper leads to the development of significantly different stress values which are dependent on the orientation of the grains. This results in some grains having higher normal stress than the others. This grain orientation dependent normal stress can reach a critical stress necessary to induce delamination at the copper and cap interface. Time taken to reach critical stress was considered as time to fail and distributions of failure times were obtained for structures with different grain orientations in the microstructure for different critical stress values. The sigma values of the failure distributions thus obtained for different constant critical stress values had a strong dependence of on the critical stress. It is therefore critical to use the appropriate critical stress value for the delamination of copper and cap interface. The critical stress necessary to overcome the local adhesion of the copper and the cap material interface is dependent on grain orientation of the copper. Simulations were carried out by considering grain orientation dependent critical normal stress values as failure criteria. The sigma value thus obtained with selected critical stress values were comparable to sigma values commonly observed from experiments.

Interplay between plasma hormone profiles, sex and body condition in immature hawksbill turtles (Eretmochelys imbricata) subjected to a capture stress protocol.

PubMed

Jessop, Tim S; Sumner, Joanna M; Limpus, Colin J; Whittier, Joan M

2004-01-01

We investigated plasma hormone profiles of corticosterone and testosterone in immature hawksbill turtles (Eretmochelys imbricata) in response to a capture stress protocol. Further, we examined whether sex and body condition were covariates associated with variation in the adrenocortical response of immature turtles. Hawksbill turtles responded to the capture stress protocol by significantly increasing plasma levels of corticosterone over a 5 h period. There was no significant sex difference in the corticosterone stress response of immature turtles. Plasma testosterone profiles, while significantly different between the sexes, did not exhibit a significant change during the 5 h capture stress protocol. An index of body condition was not significantly associated with a turtle's capacity to produce plasma corticosterone both prior to and during exposure to the capture stress protocol. In summary, while immature hawksbill turtles exhibited an adrenocortical response to a capture stress protocol, neither their sex nor body condition was responsible for variation in endocrine responses. This lack of interaction between the adrenocortical response and these internal factors suggests that the inactive reproductive- and the current energetic- status of these immature turtles are important factors that could influence plasma hormone profiles during stress.

Fingerprinting stress: stylolite and calcite twinning paleopiezometry reveal the complexity of stress distribution during the growth of the Monte Nero anticline (Apennines, Italy).

NASA Astrophysics Data System (ADS)

Beaudoin, Nicolas; Koehn, Daniel; Lacombe, Olivier; Lecouty, Alexandre; Billi, Andrea; Aharonov, Einat; Parlangeau, Camille

2016-04-01

This contribution presents for the first time how quantitative stress estimates can be derived by combining calcite twinning and stylolite roughness stress fingerprinting techniques in a structure part of a complex fold and thrust belts. We report a high-resolution deformation and stress history that was experienced by Meso-Cenozoic limestone strata in the overturned Monte Nero Anticline during its late Miocene-Pliocene growth in the Umbria-Marche Arcuate Ridge (northern Apennines, Italy). New methodological development enables an easier use for the inversion technique of sedimentary and tectonic stylolite roughness. A stylolite-fracture network developed during layer-parallel shortening (LPS), as well as syn- and post-folding. Stress fingerprinting shows how stress builds up in the sedimentary strata during LPS with variations of differential stress before folding around a value of 50 MPa. The stress regime oscillated between strike-slip and compressional during LPS and became transiently extensional in limbs of developing fold due to a coeval increase of vertical stress related to local burial and decrease of maximum horizontal stress related to hinge development, before ultimately becoming strike-slip again during late stage fold tightening. Our case study shows that stress fingerprinting is possible and that this novel method can be used to unravel complex temporal relationships that relate to local variations within evolving regional orogenic stresses. Beyond regional implication, this study validates our approach as a new exciting toolbox to high-resolution stress fingerprinting in basins and orogens.

Stressors, Appraisal of Stressors, Experienced Stress and Cardiac Response: A Real-Time, Real-Life Investigation of Work Stress in Nurses.

PubMed

Johnston, Derek; Bell, Cheryl; Jones, Martyn; Farquharson, Barbara; Allan, Julia; Schofield, Patricia; Ricketts, Ian; Johnston, Marie

2016-04-01

Stress in health care professionals may reflect both the work and appraisal of work and impacts on the individuals, their patients, colleagues and managers. The purpose of the present study is to examine physiological and psychological effects of stressors (tasks) and theory-based perceptions of work stressors within and between nurses in real time. During two work shifts, 100 nurses rated experienced stress, affect, fatigue, theory-based measures of work stress and nursing tasks on electronic diaries every 90 min, whereas heart rate and activity were measured continuously. Heart rate was associated with both demand and effort. Experienced stress was related to demand, control, effort and reward. Effort and reward interacted as predicted (but only within people). Results were unchanged when allowance was made for work tasks. Real-time appraisals were more important than actual tasks in predicting both psychological and physiological correlates of stress. At times when effort was high, perceived reward reduced stress.

(Project 14-6770) An Investigation to Establish Multiphysical Property Dataset of Nuclear Materials Based on in-situ Observations and Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tomar, Vikas; Haque, Aman; Hattar, Khalid

In-core nuclear materials including fuel pins and cladding materials fail due to issues including corrosion, mechanical wear, and pellet cladding interaction. In most such scenario microstructure dependent and corrosioninduced chemistry dependent property changes significantly affect performance of cladding, pellet, and housing. Emphasis of this work was on replace conventional pellet-cladding material models with a new straingradient viscoplasticity model that is informed by transmission electron microscopy (TEM) based measurements and by nanomechanical Raman spectroscopy (NMRS) based measurements. The TEM measurements are quantitative in nature and therefore reveal stress-strain relations with simultaneous insights into mechanisms of deformation at nanoscale. The NMRS measurementsmore » reveal the similar information at mesoscale along with additional information on relating local microstructural stresses with applied stresses. The resulting information is used to fit constants in the strain gradient viscoplasticity model as well as to validate one. During TEM measurements, a micro-electro-mechanical system based setup was developed with mechanical actuation, sensing, heating, and electrical loading. Contrary to post-mortem analysis or qualitative visualization, this setup combines direct visualization of the mechanisms behind deformation with measurement of stress, strain, thermal and electrical properties. The unique research philosophy of visualizing the microstructure at high resolution while measuring the properties led to fundamental understanding in grain size and temperature effects on measured mechanical properties such as fracture toughness. A key contribution is the role of mechanical loading boundary conditions to deconvolute the insitu TEM based nanoscale and NMRS based mesoscale data to bulk behavior. First the literature based pellet cladding mechanical interaction model based on the work of Retel’s and Williamson’s in literature work to predict tempurature and stress distribution in cladding and pellet at normal operating condition was analyzed. Later the data was fitted to find constants for a viscoplastic strain gradient model. The developed model still needs to be refined and calibrated using various experimental results. That remains the focus of future work. Overall, a major thrust of the work was therefore on active control of the microstructure (grain size, defect density and types) exploiting the multi-physics coupling in materials. In particular, using experiments the synergy of current density, mechanical stress and temperature were studied to annihilate defects and recrystallize grains. The developed model is being examined for implementation in BISON. Multiple invited talks, international journal publications, and conference publications were performed by students supported on this work. Another output is support multiple PhD and masters thesis students who will be an important asset for future basic nuclear research. Future Work Recommendations: A nuclear reactor operates under significant variations of thermal loads due to energy cycling and mechanical loads due to constraint effects. Significant thermal and chemical diffusion takes place at the pallet-cladding level. While the proposed work established new experimental approach and new dataset for Zircaloy-4, the irradiation level was in the range of 1-2 dpa. Samples with higher dpa need to be examined. Therefore, a continual of support of the performed work is essential. Currently, these are the only experiments that can measure the produced data. The work also needs to be extended to different fuel types and cladding types such as SiC and FeCrAl based claddings. A combination of datasets for these materials can then be used to analyze accurately predict behavior of critical pellet cladding systems in accident scenario with high heat flux and high thermal loads. This is a BIG unknown as if now.« less

Healthcare managers' leadership profiles in relation to perceptions of work stressors and stress.

PubMed

Lornudd, Caroline; Bergman, David; Sandahl, Christer; von Thiele Schwarz, Ulrica

2016-05-03

Purpose The purpose of this study is to investigate the relationship between leadership profiles and differences in managers' own levels of work stress symptoms and perceptions of work stressors causing stress. Design/methodology/approach Cross-sectional data were used. Healthcare managers ( n = 188) rated three dimensions of their leadership behavior and levels of work stressors and stress. Hierarchical cluster analysis was performed to identify leadership profiles based on leadership behaviors. Differences in stress-related outcomes between profiles were assessed using one-way analysis of variance. Findings Four distinct clusters of leadership profiles were found. They discriminated in perception of work stressors and stress: the profile distinguished by the lowest mean in all behavior dimensions, exhibited a pattern with significantly more negative ratings compared to the other profiles. Practical implications This paper proposes that leadership profile is an individual factor involved in the stress process, including work stressors and stress, which may inform targeted health promoting interventions for healthcare managers. Originality/value This is the first study to investigate the relationship between leadership profiles and work stressors and stress in healthcare managers.

[Nursery Teacher's Stress Scale (NTSS): reliability and validity].

PubMed

Akada, Taro

2010-06-01

This study describes the development and evaluation of the Nursery Teacher's Stress Scale (NTSS), which explores the relation between daily hassles at work and work-related stress. In Analysis 1, 29 items were chosen to construct the NTSS. Six factors were identified: I. Stress relating to child care; II. Stress from human relations at work; III. Stress from staff-parent relations; IV. Stress from lack of time; V. Stress relating to compensation; and VI. Stress from the difference between individual beliefs and school policy. All these factors had high degrees of internal consistency. In Analysis 2, the concurrent validity of the NTSS was examined. The results showed that the NTSS total scores were significantly correlated with the Job Stress Scale-Revised Version (job stressor scale, r = .68), the Pre-school Teacher-efficacy Scale (r = -.21), and the WHO-five Well-Being Index Japanese Version (r = -.40). Work stresses are affected by several daily hassles at work. The NTSS has acceptable reliability and validity, and can be used to improve nursery teacher's mental health.

Analysis of Natural Variation in Bermudagrass (Cynodon dactylon) Reveals Physiological Responses Underlying Drought Tolerance

PubMed Central

Cheng, Zhangmin; Ye, Tiantian; Chan, Zhulong

2012-01-01

Bermudagrass (Cynodon dactylon) is a widely used warm-season turfgrass and one of the most drought tolerant species. Dissecting the natural variation in drought tolerance and physiological responses will bring us powerful basis and novel insight for plant breeding. In the present study, we evaluated the natural variation of drought tolerance among nine bermudagrass varieties by measuring physiological responses after drought stress treatment through withholding water. Three groups differing in drought tolerance were identified, including two tolerant, five moderately tolerant and two susceptible varieties. Under drought stress condition, drought sensitive variety (Yukon) showed relative higher water loss, more severe cell membrane damage (EL), and more accumulation of hydrogen peroxide (H2O2) and malondialdehyde (MDA), while drought tolerant variety (Tifgreen) exhibited significantly higher antioxidant enzymes activities. Further results indicated that drought induced cell injury in different varieties (Yukon, SR9554 and Tifgreen) exhibited liner correlation with leaf water content (LWC), H2O2 content, MDA content and antioxidant enzyme activities. Additionally, Tifgreen plants had significantly higher levels of osmolytes (proline level and soluble sugars) when compared with Yukon and SR9554 under drought stress condition. Taken together, our results indicated that natural variation of drought stress tolerance in bermudagrass varieties might be largely related to the induced changes of water status, osmolyte accumulation and antioxidant defense system. PMID:23285294

Hyperion Studies Of Crop Stress In Mexico

NASA Technical Reports Server (NTRS)

Lobell, David B.; Asner, Gregory P.

2004-01-01

Satellite-based measurements of crop stress could provide much needed information for cropland management, especially in developing countries where other precision agriculture technologies are too expensive (Pierce and Nowak 1999; Robert 2002). For example, detection of areas that are nitrogen deficient or water stressed could guide fertilizer and water management decisions for all farmers within the swath of the satellite. Several approaches have been proposed to quantify canopy nutrient or water content based on spectral reflectance, most of which involve combinations of reflectance in the form of vegetation indices. While these indices are designed to maximize sensitivity to leaf chemistry, variations in other aspects of plant canopies may significantly impact remotely sensed reflectance. These confounding factors include variations in canopy structural properties (e.g., leaf area index, leaf angle distribution) as well as the extent of canopy cover, which determines the amount of exposed bare soil within a single pixel. In order to assess the utility of spectral indices for monitoring crop stress, it is therefore not only necessary to establish relationships at the leaf level, but also to test the relative importance of variations in other canopy attributes at the spatial scale of the remote sensing measurement. In this context, the relative importance of a given attribute will depend on (1) the sensitivity of the reflectance index to variation in the attribute and (2) the degree to which the attribute varies spatially and temporally.

Thermal-Fatigue Crack-Growth Characteristics and Mechanical Strain Cycling Behavior of A-286 Discaloy, and 16-25-6 Austenitic Steels

NASA Technical Reports Server (NTRS)

Smith, Robert W.; Smith, Gordon T.

1960-01-01

Thermal-fatigue crack-growth characteristics of notched- and unnotched-disk specimens of A-286, Discaloy, hot-cold worked 16-25-6, and overaged 16-25-6 were experimentally studied. Separately controlled variables were total strain range (0.0043 to 0.0079 in./in.), maximum cycle temperature (1300 and 1100 F), and hold time at maximum temperature (O and 5 min). A limited number of mechanical, push-pull, constant-strain cycle tests at room temperature were made using notched and un-notched bars of the same materials. In these tests the number of cycles to failure as well as the variation of load change with accumulated cycles was measured, and the effects of mean stress were observed. Constant-strain-range mechanical-fatigue tests at room temperature revealed notched-bar fatigue life to be strongly influenced by mean stress. For a specific strain range, the longest fatigue life was always found to be associated with the least-tensile (or most compressive) mean stress. By defining thermal-fatigue life as the number of cycles required to produce a crack area of 6000 square mils, the relative thermal-fatigue resistances of the test materials were established. Notched-disk specimens of A-286 and Discaloy steels exhibited longer fatigue lives than either hot-cold worked or overaged 16-25-6. On the other hand, unnotched-disk specimens of Discaloy and hot-cold worked 16-25-6 had longer lives than A-286 and overaged 16-25-6. Separation of the crack-growth data into microstage and macrostage periods revealed that the macrostage period accounted for the greatest part of the difference among materials when tested in the notched configuration, while the microstage was largely responsible for the differences encountered in unnotched disks.

Impact of variation in the BDNF gene on social stress sensitivity and the buffering impact of positive emotions: replication and extension of a gene-environment interaction.

PubMed

van Winkel, Mark; Peeters, Frenk; van Winkel, Ruud; Kenis, Gunter; Collip, Dina; Geschwind, Nicole; Jacobs, Nele; Derom, Catherine; Thiery, Evert; van Os, Jim; Myin-Germeys, Inez; Wichers, Marieke

2014-06-01

A previous study reported that social stress sensitivity is moderated by the brain-derived-neurotrophic-factor(Val66Met) (BDNF rs6265) genotype. Additionally, positive emotions partially neutralize this moderating effect. The current study aimed to: (i) replicate in a new independent sample of subjects with residual depressive symptoms the moderating effect of BDNF(Val66Met) genotype on social stress sensitivity, (ii) replicate the neutralizing impact of positive emotions, (iii) extend these analyses to other variations in the BDNF gene in the new independent sample and the original sample of non-depressed individuals. Previous findings were replicated in an experience sampling method (ESM) study. Negative Affect (NA) responses to social stress were stronger in "Val/Met" carriers of BDNF(Val66Met) compared to "Val/Val" carriers. Positive emotions neutralized the moderating effect of BDNF(Val66Met) genotype on social stress sensitivity in a dose-response fashion. Finally, two of four additional BDNF SNPs (rs11030101, rs2049046) showed similar moderating effects on social stress-sensitivity across both samples. The neutralizing effect of positive emotions on the moderating effects of these two additional SNPs was found in one sample. In conclusion, ESM has important advantages in gene-environment (GxE) research and may attribute to more consistent findings in future GxE research. This study shows how the impact of BDNF genetic variation on depressive symptoms may be explained by its impact on subtle daily life responses to social stress. Further, it shows that the generation of positive affect (PA) can buffer social stress sensitivity and partially undo the genetic susceptibility. Copyright © 2014 Elsevier B.V. and ECNP. All rights reserved.

Genetic variation for tolerance to terminal heat stress in Dasypyrum villosum

USDA-ARS?s Scientific Manuscript database

Heat stress substantially reduces the grain yield and quality of wheat and poses a major challenge to sustain productivity due to global warming. Across wheat growing regions in the US and globally, wheat often experiences terminal heat stress during the post-flowering period. Dasypyrum villosum, a ...

Genome wide association analysis for seedling response traits to thermal stress in sorghum germplasm

USDA-ARS?s Scientific Manuscript database

The sorghum association panel exhibited extensive variation for seedling traits under cold and heat stress. Genome-wide analyses identified thirty single nucleotide polymorphisms (SNPs) that were strongly associated with traits measured at seedling stage under cold stress and tagged genes that act a...

Self-Reported Work and Family Stress of Female Primary Teachers.

ERIC Educational Resources Information Center

Thomas, Narelle; Clarke, Valerie; Lavery, Judy

2003-01-01

Results of a self-report questionnaire indicated that female primary teachers in Australia report moderate levels of global, work, and family stress. Time and workload pressure was the major work stressor, and responsibility for child rearing the major family stressor. Work stress and home stress both impacted on each other. (EV)

Stress and the medical technologist: I. A general overview.

PubMed

Matteson, M T; Ivancevich, J M

1982-03-01

Up to 682 medical technologists were surveyed twice at a six month interval regarding a number of factors dealing with job-related stress, nonjob-related stress, personality factors and general health conditions and behaviors. This report summarizes the first data collection period. Overall work stress was found to be associated with a number of specific job and organizational stress sources. Additionally, those high in work stress differed from those low in work stress on a number of personality and health characteristics. Some additional differences were found in comparisons of supervisory and non-supervisory employees, and among those working different shifts.

Has work replaced home as a haven? Re-examining Arlie Hochschild's Time Bind proposition with objective stress data.

PubMed

Damaske, Sarah; Smyth, Joshua M; Zawadzki, Matthew J

2014-08-01

Using innovative data with objective and subjective measures of stress collected from 122 employed men and women, this paper tests the thesis of the Time Bind by asking whether people report lower stress levels at work than at home. The study finds consistent support for the Time Bind hypothesis when examining objective stress data: when participants were at work they had lower values of the stress hormone cortisol than when they were at home. Two variables moderated this association - income and children at home - such that the work as haven effect was stronger for those with lower incomes and no children living at home. Participants also, however, consistently reported higher subjective stress levels on work days than on non-work days, which is in direct contrast to the Time Bind hypothesis. Although our overall findings support Hochschild's hypothesis that stress levels are lower at work, it appears that combining work and home increases people's subjective experience of daily stress. Copyright © 2014 Elsevier Ltd. All rights reserved.

Level of Work Related Stress among Teachers in Elementary Schools.

PubMed

Agai-Demjaha, Teuta; Bislimovska, Jovanka Karadzinska; Mijakoski, Dragan

2015-09-15

Teaching is considered a highly stressful occupation, with work-related stress levels among teachers being among the highest compared to other professions. Unfortunately there are very few studies regarding the levels of work-related stress among teachers in the Republic of Macedonia. To identify the level of self-perceived work-related stress among teachers in elementary schools and its relationship to gender, age, position in the workplace, the level of education and working experience. We performed a descriptive-analytical model of a cross-sectional study that involved 300 teachers employed in nine elementary schools. Evaluation of examined subjects included completion of a specially designed questionnaire. We found that the majority of interviewed teachers perceive their work-related stress as moderate. The level of work-related stress was significantly high related to the gender, age, position in workplace, as well as working experience (p < 0.01), while it was significant related to level of education (p < 0.05). Significantly greater number of lower-grade teachers perceives the workplace as extremely stressful as compared to the upper-grade teachers (18.5% vs. 5.45%), while the same is true for female respondents as compared to the male ones (15.38% vs. 3.8%). In addition, our results show that teachers with university education significantly more often associate their workplace with stronger stress than their colleagues with high education (13.48% vs. 9.4%). We also found that there is no significant difference of stress levels between new and more experienced teachers. Our findings confirm that the majority of interviewed teachers perceived their work-related stress as high or very high. In terms of the relationship between the level of teachers' stress and certain demographic and job characteristics, according to our results, the level of work-related stress has shown significantly high relation to gender, age, levels of grades taught as well as working experience, and significant relation to the level of education.

Level of Work Related Stress among Teachers in Elementary Schools

PubMed Central

Agai–Demjaha, Teuta; Bislimovska, Jovanka Karadzinska; Mijakoski, Dragan

2015-01-01

BACKGROUND: Teaching is considered a highly stressful occupation, with work-related stress levels among teachers being among the highest compared to other professions. Unfortunately there are very few studies regarding the levels of work-related stress among teachers in the Republic of Macedonia. AIM: To identify the level of self-perceived work-related stress among teachers in elementary schools and its relationship to gender, age, position in the workplace, the level of education and working experience. MATERIAL AND METHODS: We performed a descriptive-analytical model of a cross-sectional study that involved 300 teachers employed in nine elementary schools. Evaluation of examined subjects included completion of a specially designed questionnaire. RESULTS: We found that the majority of interviewed teachers perceive their work-related stress as moderate. The level of work-related stress was significantly high related to the gender, age, position in workplace, as well as working experience (p < 0.01), while it was significant related to level of education (p < 0.05). Significantly greater number of lower-grade teachers perceives the workplace as extremely stressful as compared to the upper-grade teachers (18.5% vs. 5.45%), while the same is true for female respondents as compared to the male ones (15.38% vs. 3.8%). In addition, our results show that teachers with university education significantly more often associate their workplace with stronger stress than their colleagues with high education (13.48% vs. 9.4%). We also found that there is no significant difference of stress levels between new and more experienced teachers. CONCLUSION: Our findings confirm that the majority of interviewed teachers perceived their work-related stress as high or very high. In terms of the relationship between the level of teachers’ stress and certain demographic and job characteristics, according to our results, the level of work-related stress has shown significantly high relation to gender, age, levels of grades taught as well as working experience, and significant relation to the level of education. PMID:27275275

Managing work-related stress in the district nursing workplace.

PubMed

Burke, Michelle

2013-11-01

This article aims to highlight the issue of work-related stress within the district nursing workplace. It will acknowledge how the management of work-related stress has previously been discussed within nursing literature and will consider the emerging relationship between staff working conditions, staff wellbeing and quality of patient care. It will reintroduce the Health and Safety Executive's (HSE's) Management Standards approach to tackling work-related stress, which provides management support to reduce environmental work stressors and encourage enabling work environments and a positive workplace culture.

Health and safety matters! Associations between organizational practices and personal support workers' life and work stress in Ontario, Canada.

PubMed

Zeytinoglu, Isik U; Denton, Margaret; Brookman, Catherine; Davies, Sharon; Sayin, Firat K

2017-06-21

The home and community care sector is one of the fastest growing sectors globally and most prominently in mature industrialized countries. Personal support workers (PSWs) are the largest occupational group in the sector. This paper focuses on the emotional health of PSWs working in the home and community care sector in Ontario, Canada. The purpose of this paper is to present evidence on the associations between PSWs' life and work stress and organizational practices of full-time and guaranteed hours, and PSWs' perceptions of support at work and preference for hours. Data come from our 2015 survey of 1543 PSWs. Dependent variables are life and work stress. Independent variables are: objective organizational practices of full-time and guaranteed hours, and subjective organizational practices of perceived support at work, and preferred hours of work. Descriptive statistics, correlations and ordinary least square regression analyses with collinearity tests are conducted. Organizational practices of employing PSWs in full-time or guaranteed hours are not associated with their life and work stress. However, those who perceive support from their organizations are also the ones reporting lower life and work stress. In addition, those PSWs perceiving support from their supervisor report lower work stress. PSWs would like to work in their preferred hours, and those who prefer to work more hours report lower life and work stress, and conversely, those who prefer to work less hours report life and work stress. For PSWs in home and community care, perceived support from their organizations and supervisors, and employment in preferred hours are important factors related to their life and work stress.

Stress hormones in relation to breeding status and territory location in colonial king penguin: a role for social density?

PubMed

Viblanc, Vincent A; Gineste, Benoit; Stier, Antoine; Robin, Jean-Patrice; Groscolas, René

2014-07-01

Because glucocorticoid (stress) hormones fundamentally affect various aspects of the behaviour, life history and fitness of free-living vertebrates, there is a need to understand the environmental factors shaping their variation in natural populations. Here, we examined whether spatial heterogeneity in breeding territory quality affected the stress of colonial king penguin (Aptenodytes patagonicus). We assessed the effects of local climate (wind, sun and ambient temperature) and social conditions (number of neighbours, distance to neighbours) on the baseline levels of plasma total corticosterone (CORT) in 77 incubating and 42 chick-brooding birds, breeding on territories of central or peripheral colony location. We also assessed the oxidative stress status of a sub-sample of central vs. peripheral chick-brooders to determine whether chronic stress arose from breeding on specific territories. On average, we found that brooders had 55% higher CORT levels than incubators. Regardless of breeding status, central birds experienced greater social density (higher number of neighbours, shorter distance between territories) and had higher CORT levels than peripheral birds. Increasing social density positively explained 40% of the variation in CORT levels of both incubators and brooders, but the effect was more pronounced in brooders. In contrast, climate was similar among breeding territories and did not significantly affect the CORT levels of breeding birds. In brooders, oxidative stress status was not affected by local density or weather conditions. These results highlight that local heterogeneity in breeding (including social) conditions may strongly affect the stress levels of breeding seabirds. The fitness consequences of such variation remain to be investigated.

Hematological variations at rest and during maximal and submaximal exercise in a cold (0°C) environment

NASA Astrophysics Data System (ADS)

Vogelaere, P.; Brasseur, M.; Quirion, A.; Leclercq, R.; Laurencelle, L.; Bekaert, S.

1990-03-01

The affect of negative thermal stress on hematological variables at rest, and during submaximal (sub ex) and maximal exercise (max ex) were observed for young males who volunteered in two experimental sessions, performed in cold (0°C) and in normal room temperature (20°C). At rest, hematological variables such as RBC and derivates Hb and Hct were significantly increased ( P<0.05) during cold stress exposure, while plasma volume decreased. The findings of this study suggest that the major factor inducing hypovolemia during low thermal stress can be imputed to local plasma water-shift mechanisms and especially to a transient shift of plasma water from intrato extravascular compartments. Rest values for WBC and platelets (Pla) were also slightly increased during cold stress exposure. However this increase can partly be related to hemoconcentration but also to the cold induced hyperventilation activating the lung circulation. Maximal exhaustive exercise induced, in both experimental temperatures, significant ( P<0.05) increments of RBC, Hb, Hct, and WBC while plasma volume decreased. However, Pla increase was less marked. On the other hand, cold stress raised slightly the observed variations of the different hematological variables. Submaximal exercise induced a similar, though non-significant, pattern for the different hematological variables in both experimental conditions. Observed plasma volume (Δ PV%) reduction appears during exercise. However cold stress induced resting plasma volume variations that are transferred at every exercise level. Neither exercise nor cold inducement significantly modified the hematological indices (MCH, MCV, MCHC). In conclusion hematological variables are affected by cold stress exposure, even when subjects perform a physical activity.

A statistical approach for generating synthetic tip stress data from limited CPT soundings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basalams, M.K.

CPT tip stress data obtained from a Uranium mill tailings impoundment are treated as time series. A statistical class of models that was developed to model time series is explored to investigate its applicability in modeling the tip stress series. These models were developed by Box and Jenkins (1970) and are known as Autoregressive Moving Average (ARMA) models. This research demonstrates how to apply the ARMA models to tip stress series. Generation of synthetic tip stress series that preserve the main statistical characteristics of the measured series is also investigated. Multiple regression analysis is used to model the regional variationmore » of the ARMA model parameters as well as the regional variation of the mean and the standard deviation of the measured tip stress series. The reliability of the generated series is investigated from a geotechnical point of view as well as from a statistical point of view. Estimation of the total settlement using the measured and the generated series subjected to the same loading condition are performed. The variation of friction angle with depth of the impoundment materials is also investigated. This research shows that these series can be modeled by the Box and Jenkins ARMA models. A third degree Autoregressive model AR(3) is selected to represent these series. A theoretical double exponential density function is fitted to the AR(3) model residuals. Synthetic tip stress series are generated at nearby locations. The generated series are shown to be reliable in estimating the total settlement and the friction angle variation with depth for this particular site.« less

The Contagion of Stress across Multiple Roles.

ERIC Educational Resources Information Center

Bolger, Niall; And Others

1989-01-01

Examined causal dynamics of stress contagion across work and home domains in married couples. Results revealed that husbands were more likely than wives to bring home stresses into workplace. Stress contagion from work to home was evident for both husbands and wives. Contagion of work stress into home appeared to set into motion process of dyadic…

Mapping groundwater level and aquifer storage variations from InSAR measurements in the Madrid aquifer, Central Spain

NASA Astrophysics Data System (ADS)

Béjar-Pizarro, Marta; Ezquerro, Pablo; Herrera, Gerardo; Tomás, Roberto; Guardiola-Albert, Carolina; Ruiz Hernández, José M.; Fernández Merodo, José A.; Marchamalo, Miguel; Martínez, Rubén

2017-04-01

Groundwater resources are under stress in many regions of the world and the future water supply for many populations, particularly in the driest places on Earth, is threatened. Future climatic conditions and population growth are expected to intensify the problem. Understanding the factors that control groundwater storage variation is crucial to mitigate its adverse consequences. In this work, we apply satellite-based measurements of ground deformation over the Tertiary detritic aquifer of Madrid (TDAM), Central Spain, to infer the spatio-temporal evolution of water levels and estimate groundwater storage variations. Specifically, we use Persistent Scatterer Interferometry (PSI) data during the period 1992-2010 and piezometric time series on 19 well sites covering the period 1997-2010 to build groundwater level maps and quantify groundwater storage variations. Our results reveal that groundwater storage loss occurred in two different periods, 1992-1999 and 2005-2010 and was mainly concentrated in a region of ∼200 km2. The presence of more compressible materials in that region combined with a long continuous water extraction can explain this volumetric deficit. This study illustrates how the combination of PSI and piezometric data can be used to detect small aquifers affected by groundwater storage loss helping to improve their sustainable management.

Stakeholder perceptions of job stress in an industrialized country: implications for policy and practice.

PubMed

Page, Kathryn M; LaMontagne, Anthony D; Louie, Amber M; Ostry, Aleck S; Shaw, Andrea; Shoveller, Jeannie A

2013-08-01

We used a secondary, qualitative analysis of stakeholder perceptions of work stress in Australia to characterize the context for policy and practice intervention. Themes included: Individual versus contextual descriptions of stress; perceived 'gender' differences in manifesting and reporting of stress; the work/home interface; and perceived sectoral and occupational differences in compensation claim rates. We found that people often still perceive stress as an individual rather than organizational problem and view work stress as a stereotypically feminine weakness that affects only certain people. Organizations downplay and overlook risks, increasing worker reluctance to report stressors, creating barriers to job stress interventions. Our study may be relevant to other industrial countries where researchers currently study job stress interventions to improve their effectiveness. Comprehensive approaches can increase knowledge and decrease stigma about job stress and mental illness, and target both work- and non-work-related influences on mental health.

Studies on laws of stress-magnetization based on magnetic memory testing technique

NASA Astrophysics Data System (ADS)

Ren, Shangkun; Ren, Xianzhi

2018-03-01

Metal magnetic memory (MMM) testing technique is a novel testing method which can early test stress concentration status of ferromagnetic components. Under the different maximum tensile stress, the relationship between the leakage magnetic field of at certain point of cold rolled steel specimen and the tensile stress was measured during the process of loading and unloading by repeated. It shows that when the maximum tensile stress is less than 610 MPa, the relationship between the magnetic induction intensity and the stress is linear; When the maximum tensile stress increase from 610 MPa to 653 MPa of yield point, the relationship between the magnetic induction intensity and the tensile becomes bending line. The location of the extreme point of the bending line will move rapidly from the position of smaller stress to the larger stress position, and the variation of magnetic induction intensity increases rapidly. When the maximum tensile stress is greater than the 653 MPa of yield point, the variation of the magnetic induction intensity remains large, and the position of the extreme point moves very little. In theoretical aspects, tensile stress is to be divided into ordered stress and disordered stress. In the stage of elastic stress, a microscopic model of the order stress magnetization is established, and the conclusions are in good agreement with the experimental data. In the plastic deformation stage, a microscopic model of disordered stress magnetization is established, and the conclusions are in good agreement with the experimental data, too. The research results can provide reference for the accurate quantitative detection and evaluation of metal magnetic memory testing technology.

Heart Rate Variability Frequency Domain Alterations among Healthy Nurses Exposed to Prolonged Work Stress.

PubMed

Borchini, Rossana; Veronesi, Giovanni; Bonzini, Matteo; Gianfagna, Francesco; Dashi, Oriana; Ferrario, Marco Mario

2018-01-11

The deregulation of the autonomic nervous system assessed through the heart rate variability (HRV) analysis is a promising pathway linking work stress and cardiovascular diseases. We aim to investigate the associations between HRV High Frequency (HF) and Low Frequency (LF) powers and work stress in a sample of 36 healthy nurses. Perceived work stress was assessed twice one year apart, using the Job Content and Effort Reward Imbalance questionnaires. This allows to classify nurses in three exposure groups: "prolonged high stress" (PHS), "recent high stress" (RHS) and "stable low stress" (SLS). A 24-h ECG monitoring was later performed during a working day (WD) and a subsequent resting day (RD). Statistically significantly lower ( p < 0.02) HF and LF means were found in PHS and RHS nurses during the working periods. In the subsequent resting periods, HF means showed increases over time in the RHS (beta = +0.41, p < 0.05), but not in PHS nurses. LF means did not show any substantial increases in the resting periods, in the PHS group with geometric means lower when compared to SLS, in the non-working and resting periods. Our study evidences that both prolonged and recent perceived high work stress were associated with a reduction of HF and LF powers during work. In addition, prolonged stress was associated with a lack of recovery during not-working and resting periods.

The moderating effects of aging and cognitive abilities on the association between work stress and negative affect.

PubMed

Hyun, Jinshil; Sliwinski, Martin J; Almeida, David M; Smyth, Joshua M; Scott, Stacey B

2018-05-01

Given that the association between work stress and negative affect can exacerbate negative health and workplace outcomes, it is important to identify the protective and risk factors that moderate this association. Socioemotional aging and cognitive abilities might influence how people utilize emotion regulation skills and engage in practical problem solving to manage their work stress. The aim of this study is to examine whether age and cognitive abilities independently and interactively moderate the association between work-related stress and negative affect. A diverse working adult sample (N = 139, age 25-65, 69% of females) completed a cross-sectional survey that assessed chronic work stress, negative affect, and fluid and crystallized cognitive abilities. Results from regression analyses suggested that both fluid and crystallized cognitive abilities, but not age, moderated the association between work stress and negative affect. Further, we found that crystallized cognition had a stronger attenuating effect on the work stress-negative affect association for older compared to younger workers. The moderating effect of fluid cognition was invariant across age. Our findings demonstrate that cognitive abilities are an important personal resource that might protect individuals against the negative impacts of work stress and negative affect. Although the role that fluid cognition plays in work stress-negative affect association is comparably important for both younger and older workers, crystallized cognition might play a more valuable role for older than younger workers.

Walking to work in Canada: health benefits, socio-economic characteristics and urban-regional variations.

PubMed

Kitchen, Peter; Williams, Allison; Chowhan, James

2011-04-04

There is mounting concern over increasing rates of physical inactivity and overweight/obesity among children and adult in Canada. There is a clear link between the amount of walking a person does and his or her health. The purpose of this paper is to assess the health factors, socio-economic characteristics and urban-regional variations of walking to work among adults in Canada. Data is drawn from two cycles of the Canadian Community Health Survey: 2001 and 2005. The study population is divided into three groups: non-walkers, lower-duration walkers and high-duration walkers. Logistic regression modeling tests the association between levels of walking and health related outcomes (diabetes, high blood pressure, stress, BMI, physical activity), socio-economic characteristics (sex, age, income, education) and place of residence (selected Census Metropolitan Areas). In 2005, the presence of diabetes and high blood pressure was not associated with any form of walking. Adults within the normal weight range were more likely to be high-duration walkers. Females and younger people were more likely to be lower-duration walkers but less likely to be high-duration walkers. There was a strong association between SES (particularly relative disadvantage) and walking to work. In both 2001 and 2005, the conditions influencing walking to work were especially prevalent in Canada's largest city, Toronto, as well as in several small to medium sized urban areas including Halifax, Kingston, Hamilton, Regina, Calgary and Victoria. A number of strategies can be followed to increase levels of walking in Canada. It is clear that for many people walking to work is not possible. However, strategies can be developed to encourage adults to incorporate walking into their daily work and commuting routines. These include mass transit walking and workplace walking programs.

Development of a Model for Dynamic Recrystallization Consistent with the Second Derivative Criterion.

PubMed

Imran, Muhammad; Kühbach, Markus; Roters, Franz; Bambach, Markus

2017-11-02

Dynamic recrystallization (DRX) processes are widely used in industrial hot working operations, not only to keep the forming forces low but also to control the microstructure and final properties of the workpiece. According to the second derivative criterion (SDC) by Poliak and Jonas, the onset of DRX can be detected from an inflection point in the strain-hardening rate as a function of flow stress. Various models are available that can predict the evolution of flow stress from incipient plastic flow up to steady-state deformation in the presence of DRX. Some of these models have been implemented into finite element codes and are widely used for the design of metal forming processes, but their consistency with the SDC has not been investigated. This work identifies three sources of inconsistencies that models for DRX may exhibit. For a consistent modeling of the DRX kinetics, a new strain-hardening model for the hardening stages III to IV is proposed and combined with consistent recrystallization kinetics. The model is devised in the Kocks-Mecking space based on characteristic transition in the strain-hardening rate. A linear variation of the transition and inflection points is observed for alloy 800H at all tested temperatures and strain rates. The comparison of experimental and model results shows that the model is able to follow the course of the strain-hardening rate very precisely, such that highly accurate flow stress predictions are obtained.

Development of a Model for Dynamic Recrystallization Consistent with the Second Derivative Criterion

PubMed Central

Imran, Muhammad; Kühbach, Markus; Roters, Franz; Bambach, Markus

2017-01-01

Dynamic recrystallization (DRX) processes are widely used in industrial hot working operations, not only to keep the forming forces low but also to control the microstructure and final properties of the workpiece. According to the second derivative criterion (SDC) by Poliak and Jonas, the onset of DRX can be detected from an inflection point in the strain-hardening rate as a function of flow stress. Various models are available that can predict the evolution of flow stress from incipient plastic flow up to steady-state deformation in the presence of DRX. Some of these models have been implemented into finite element codes and are widely used for the design of metal forming processes, but their consistency with the SDC has not been investigated. This work identifies three sources of inconsistencies that models for DRX may exhibit. For a consistent modeling of the DRX kinetics, a new strain-hardening model for the hardening stages III to IV is proposed and combined with consistent recrystallization kinetics. The model is devised in the Kocks-Mecking space based on characteristic transition in the strain-hardening rate. A linear variation of the transition and inflection points is observed for alloy 800H at all tested temperatures and strain rates. The comparison of experimental and model results shows that the model is able to follow the course of the strain-hardening rate very precisely, such that highly accurate flow stress predictions are obtained. PMID:29099068

The Arabidopsis DNA Methylome Is Stable under Transgenerational Drought Stress1[OPEN

PubMed Central

2017-01-01

Improving the responsiveness, acclimation, and memory of plants to abiotic stress holds substantive potential for improving agriculture. An unresolved question is the involvement of chromatin marks in the memory of agriculturally relevant stresses. Such potential has spurred numerous investigations yielding both promising and conflicting results. Consequently, it remains unclear to what extent robust stress-induced DNA methylation variation can underpin stress memory. Using a slow-onset water deprivation treatment in Arabidopsis (Arabidopsis thaliana), we investigated the malleability of the DNA methylome to drought stress within a generation and under repeated drought stress over five successive generations. While drought-associated epi-alleles in the methylome were detected within a generation, they did not correlate with drought-responsive gene expression. Six traits were analyzed for transgenerational stress memory, and the descendants of drought-stressed lineages showed one case of memory in the form of increased seed dormancy, and that persisted one generation removed from stress. With respect to transgenerational drought stress, there were negligible conserved differentially methylated regions in drought-exposed lineages compared with unstressed lineages. Instead, the majority of observed variation was tied to stochastic or preexisting differences in the epigenome occurring at repetitive regions of the Arabidopsis genome. Furthermore, the experience of repeated drought stress was not observed to influence transgenerational epi-allele accumulation. Our findings demonstrate that, while transgenerational memory is observed in one of six traits examined, they are not associated with causative changes in the DNA methylome, which appears relatively impervious to drought stress. PMID:28986422

The effect of Reiki on work-related stress of the registered nurse.

PubMed

Cuneo, Charlotte L; Curtis Cooper, Maureen R; Drew, Carolyn S; Naoum-Heffernan, Christine; Sherman, Tricia; Walz, Kathleen; Weinberg, Janice

2011-03-01

The Reiki Master Teacher group at a large academic, urban medical center studied the effects of Reiki on work-related stress in Registered Nurse Reiki I class participants. Research suggests that work-related stress is an influential factor in nursing burn out and retention. Reiki, an ancient form of Oriental "energy work" or healing, has been found to decrease stress. The Perceived Stress Scale tool was administered prior to the Reiki I class and after three weeks of practicing self-Reiki. Seventeen participants returned follow-up data. Results indicated that practicing Reiki more often resulted in reduced perceived stress levels. Data from this small pilot study supports educating nurses about Reiki practice to decrease work-related stress.

Drought stress limits the geographic ranges of two tree species via different physiological mechanisms.

PubMed

Anderegg, Leander D L; HilleRisLambers, Janneke

2016-03-01

Range shifts are among the most ubiquitous ecological responses to anthropogenic climate change and have large consequences for ecosystems. Unfortunately, the ecophysiological forces that constrain range boundaries are poorly understood, making it difficult to mechanistically project range shifts. To explore the physiological mechanisms by which drought stress controls dry range boundaries in trees, we quantified elevational variation in drought tolerance and in drought avoidance-related functional traits of a widespread gymnosperm (ponderosa pine - Pinus ponderosa) and angiosperm (trembling aspen - Populus tremuloides) tree species in the southwestern USA. Specifically, we quantified tree-to-tree variation in growth, water stress (predawn and midday xylem tension), drought avoidance traits (branch conductivity, leaf/needle size, tree height, leaf area-to-sapwood area ratio), and drought tolerance traits (xylem resistance to embolism, hydraulic safety margin, wood density) at the range margins and range center of each species. Although water stress increased and growth declined strongly at lower range margins of both species, ponderosa pine and aspen showed contrasting patterns of clinal trait variation. Trembling aspen increased its drought tolerance at its dry range edge by growing stronger but more carbon dense branch and leaf tissues, implying an increased cost of growth at its range boundary. By contrast, ponderosa pine showed little elevational variation in drought-related traits but avoided drought stress at low elevations by limiting transpiration through stomatal closure, such that its dry range boundary is associated with limited carbon assimilation even in average climatic conditions. Thus, the same climatic factor (drought) may drive range boundaries through different physiological mechanisms - a result that has important implications for process-based modeling approaches to tree biogeography. Further, we show that comparing intraspecific patterns of trait variation across ranges, something rarely done in a range-limit context, helps elucidate a mechanistic understanding of range constraints. © 2015 John Wiley & Sons Ltd.

Technical and clinical aspects of cortisol as a biochemical marker of chronic stress.

PubMed

Lee, Do Yup; Kim, Eosu; Choi, Man Ho

2015-04-01

Stress is now recognized as a universal premorbid factor associated with many risk factors of various chronic diseases. Acute stress may induce an individual's adaptive response to environmental demands. However, chronic, excessive stress causes cumulative negative impacts on health outcomes through "allostatic load". Thus, monitoring the quantified levels of long-term stress mediators would provide a timely opportunity for prevention or earlier intervention of stress-related chronic illnesses. Although either acute or chronic stress could be quantified through measurement of changes in physiological parameters such as heart rate, blood pressure, and levels of various metabolic hormones, it is still elusive to interpret whether the changes in circulating levels of stress mediators such as cortisol can reflect the acute, chronic, or diurnal variations. Both serum and salivary cortisol levels reveal acute changes at a single point in time, but the overall long-term systemic cortisol exposure is difficult to evaluate due to circadian variations and its protein-binding capacity. Scalp hair has a fairy predictable growth rate of approximately 1 cm/month, and the most 1 cm segment approximates the last month's cortisol production as the mean value. The analysis of cortisol in hair is a highly promising technique for the retrospective assessment of chronic stress.

PHEOCHROMOCYTOMA: AN ENDOCRINE STRESS MIMICKING DISORDER

PubMed Central

Kantorovich, Vitaly; Eisenhofer, Graeme; Pacak, Karel

2008-01-01

Pheochromocytoma is an endocrine tumor that can uniquely mimic numerous stress-associated disorders, with variations in clinical manifestations resulting from different patterns of catecholamine secretion and actions of released catecholamines on physiological systems. PMID:19120142

Work-related stress, work/life balance and personal life coaching.

PubMed

Hawksley, Barbara

2007-01-01

Work-related stress adversely affects personal performance, organizational efficiency and patient care as well as costing the NHS millions of pounds each year. Reducing the effects of work-related stress is a legal duty for all employers. There are a number of resources available to help both employees and employers, such as the Health and Safety Executive stress management standards. Personal life coaching is one approach to reducing work-related stress, which is well established amongst business and management executives as well as some public sector organizations.

New Variational Formulations of Hybrid Stress Elements

NASA Technical Reports Server (NTRS)

Pian, T. H. H.; Sumihara, K.; Kang, D.

1984-01-01

In the variational formulations of finite elements by the Hu-Washizu and Hellinger-Reissner principles the stress equilibrium condition is maintained by the inclusion of internal displacements which function as the Lagrange multipliers for the constraints. These versions permit the use of natural coordinates and the relaxation of the equilibrium conditions and render considerable improvements in the assumed stress hybrid elements. These include the derivation of invariant hybrid elements which possess the ideal qualities such as minimum sensitivity to geometric distortions, minimum number of independent stress parameters, rank sufficient, and ability to represent constant strain states and bending moments. Another application is the formulation of semiLoof thin shell elements which can yield excellent results for many severe test cases because the rigid body nodes, the momentless membrane strains, and the inextensional bending modes are all represented.

Environmental gradients and grassland trait variation: Insight into the effects of climate change

NASA Astrophysics Data System (ADS)

Tardella, Federico M.; Piermarteri, Karina; Malatesta, Luca; Catorci, Andrea

2016-10-01

The research aim was to understand how variation of temperature and water availability drives trait assemblage of seminatural grasslands in sub-Mediterranean climate, where climate change is expected to intensify summer aridity. In the central Italy, we recorded species abundance and elevation, slope aspect and angle in 129 plots. The traits we analysed were life span, growth form, clonality, belowground organs, leaf traits, plant height, seed mass, and palatability. We used Ellenberg's indicators as a proxy to assess air temperature and soil moisture gradients. From productive to harsh conditions, we observed a shift from tolerance to avoidance strategies, and a change in resource allocation strategies to face competition and stress or that maximize exploitation of patchily distributed soil resource niches. In addition, we found that the increase of temperature and water scarcity leads to the establishment of regeneration strategies that enable plants to cope with the unpredictability of changes in stress intensity and duration. Since the dry habitats of higher elevations are also constrained by winter cold stress, we argue that, within the sub-Mediterranean bioclimate, climate change will likely lead to a variation in dominance inside plant communities rather than a shift upwards of species ranges. At higher elevations, drought-adaptive traits might become more abundant on south-facing slopes that are less stressed by winter low temperatures; traits related to productive conditions and cold stress would be replaced on north-facing slopes by those adapted to overcome both the drought and the cold stresses.

Is telomere length a molecular marker of past thermal stress in wild fish?

PubMed

Debes, Paul V; Visse, Marko; Panda, Bineet; Ilmonen, Petteri; Vasemägi, Anti

2016-11-01

Telomeres protect eukaryotic chromosomes; variation in telomere length has been linked (primarily in homoeothermic animals) to variation in stress, cellular ageing and disease risk. Moreover, telomeres have been suggested to function as biomarker for quantifying past environmental stress, but studies in wild animals remain rare. Environmental stress, such as extreme environmental temperatures in poikilothermic animals, may result in oxidative stress that accelerates telomere attrition. However, growth, which may depend on temperature, can also contribute to telomere attrition. To test for associations between multitissue telomere length and past water temperature while accounting for the previous individual growth, we used quantitative PCR to analyse samples from 112 young-of-the-year brown trout from 10 natural rivers with average water temperature differences of up to 6°C (and an absolute maximum of 23°C). We found negative associations between relative telomere length (RTL) and both average river temperature and individual body size. We found no indication of RTL-temperature association differences among six tissues, but we did find indications for differences among the tissues for associations between RTL and body size; size trends, albeit nonsignificant in their differences, were strongest in muscle and weakest in fin. Although causal relationships among temperature, growth, oxidative stress, and cross-sectional telomere length remain largely unknown, our results indicate that telomere-length variation in a poikilothermic wild animal is associated with both past temperature and growth. © 2016 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd.

Transient Interfacial Phenomena in Miscible Polymer Systems (TIPMPS)

NASA Technical Reports Server (NTRS)

Pojman, John A.; Bessonov, Nicholas; Volpert, Vitaly; Wilke, Hermann

2003-01-01

Almost one hundred years ago Korteweg published a theory of how stresses could be induced in miscible fluids by concentration gradients, causing phenomena that would appear to be the same as with immiscible fluids. Miscible fluids could manifest a transient or effective interfacial tension (EIT). To this day, there has been no definitive experiment to confirm Korteweg's model but numerous fascinating and suggestive experiments have been reported. The goal of TIPMPS is to answer the question: Can concentration and temperature gradients in miscible materials induce stresses that cause convection? Many polymer processes involving miscible monomer and polymer systems could be affected by fluid flow and so this work could help understand miscible polymer processing, not only in microgravity, but also on earth. Demonstrating the existence of this phenomenon in miscible fluids will open up a new area of study for materials science. The science objectives of TIPMPS are: (1) Determine if convection can be induced by variation of the width of a miscible interface; (2) Determine if convection can be induced by variation of temperature along a miscible interface; (3) Determine if convection can be induced by variation of conversion along a miscible interface An interface between two miscible fluids can best be created via a spatially-selective photopolymerization of dodecyl acrylate with a photoinitiator, which allows the creation of precise and accurate concentration gradients between polymer and monomer. Optical techniques will be used to measure the refractive index variation caused by the resultant temperature and concentration fields. The viscosity of the polymer will be measured from the increase in the fluorescence of pyrene. Because the large concentration and temperature gradients cause buoyancy-driven convection that prevents the observation of the predicted flows, the experiment must be done in microgravity. In this report, we will consider our efforts to estimate the square gradient parameter, k, and our use of the estimates in modeling of the planned TIPMPS experiments. We developed a model consisting of the heat and diffusion equations with convective terms and of the Navier-Stokes equations with an additional volume force written in the form of the Korteweg stresses arising from nonlocal interaction in the fluid. The fluid's viscosity dependence on polymer conversion and temperature was taken from measurements of poly(dodecyl acrylate). Numerical modeling demonstrated that significant flows would arise for conditions corresponding to the planned experiments.

The impact of the 2008 financial crisis on psychological work stress among financial workers and lawyers.

PubMed

Tsai, Feng-Jen; Chan, Chang-Chuan

2011-04-01

The aim of this study was to investigate the impact of the financial crisis on psychological work stress among financial workers and lawyers. The Chinese versions of Karasek's job content questionnaire (C-JCQ) and Siegrist's ERI questionnaire (C-ERI) were used to measure work stress, and the Copenhagen Burnout Inventory (C-CBI) questionnaire was used to measure personal and work-related burnout for 38 financial workers and 97 lawyers before and after the financial crisis in 2008. A paired t test was used to compare changes in work stress and burnout. A logistic regression was performed to determine the association between psychosocial work stress and burnout. After the financial crisis, financial workers reported significantly higher stress from fear of layoffs, increased experiences of undesirable changes and more fear of making mistakes during work. On the contrary, lawyers reported significantly higher scores of reward, fewer psychological demands and less exhaustion. In addition to high psychological demand and a high effort-reward ratio, high effort, over-commitment and stress of layoffs also contributed to personal and work-related burnout after the financial crisis. After the financial crisis, lawyers' personal burnout decreased with the increase of reward, and their work-related burnout decreased with the decrease in psychological demand. The financial crisis has an unequal psychological impact on financial workers and lawyers. Financial workers' psychosocial work stress and burnout were aggravated, while lawyers' psychosocial work stress and burnout were alleviated.

Work-related stress and Type 2 diabetes: systematic review and meta-analysis.

PubMed

Cosgrove, M P; Sargeant, L A; Caleyachetty, R; Griffin, S J

2012-04-01

Work-related psychosocial stress has been hypothesized to increase the individual risk of Type 2 diabetes; however, observational epidemiological studies investigating the association between work-related psychosocial stress and Type 2 diabetes have provided an inconsistent picture. To evaluate whether work-related psychosocial stress (defined by a work-related stress model or by long work hours) is associated with the risk of Type 2 diabetes. A systematic review of the literature was conducted until March 2010. Studies eligible for inclusion were published observational epidemiological studies of adult participants in community or occupational settings if they had a measure of work-related stress on a validated scale or a measure of work hours or overtime assessed prior to, or at the same time as, assessment of Type 2 diabetes status. Where possible, meta-analysis was conducted to obtain summary odds ratios of the association. We located nine studies (four prospective, one case-control and four cross-sectional). The meta-analyses did not show any statistically significant associations between any individual aspect of work-related psychosocial stress or job strain and risk of Type 2 diabetes. The specific hypothesis that a working environment characterized by high psychosocial stress is directly associated with increased risk of Type 2 diabetes could not be supported from the meta-analysis.

Job stress, coping and health perceptions of Hong Kong primary care nurses.

PubMed

Lee, Joseph K L

2003-04-01

Few empirical studies have investigated job stress, coping and health perceptions of nurses working in primary care settings. One thousand self-report questionnaires, which consisted of the modified Nursing Stress Scale, Coping with Work Stress Checklist and Health Perceptions Questionnaire, were distributed randomly to a group of Hong Kong nurses working in primary care settings, to examine issues related to job stress. Three hundred and sixty-two nurses responded. Findings indicated that nurses in these settings experienced low-to-moderate frequency of stress, adopted direct coping strategies, and perceived themselves as rather healthy. There were also statistically significant links between job stress, coping and perceived health status. The findings of this study suggest that job stress, coping and health perception of nurses working in primary care settings were distinct from their colleagues working in acute care settings.

Numerical development of a new correlation between biaxial fracture strain and material fracture toughness for small punch test

NASA Astrophysics Data System (ADS)

Kumar, Pradeep; Dutta, B. K.; Chattopadhyay, J.

2017-04-01

The miniaturized specimens are used to determine mechanical properties of the materials, such as yield stress, ultimate stress, fracture toughness etc. Use of such specimens is essential whenever limited quantity of material is available for testing, such as aged/irradiated materials. The miniaturized small punch test (SPT) is a technique which is widely used to determine change in mechanical properties of the materials. Various empirical correlations are proposed in the literature to determine the value of fracture toughness (JIC) using this technique. bi-axial fracture strain is determined using SPT tests. This parameter is then used to determine JIC using available empirical correlations. The correlations between JIC and biaxial fracture strain quoted in the literature are based on experimental data acquired for large number of materials. There are number of such correlations available in the literature, which are generally not in agreement with each other. In the present work, an attempt has been made to determine the correlation between biaxial fracture strain (εqf) and crack initiation toughness (Ji) numerically. About one hundred materials are digitally generated by varying yield stress, ultimate stress, hardening coefficient and Gurson parameters. Such set of each material is then used to analyze a SPT specimen and a standard TPB specimen. Analysis of SPT specimen generated biaxial fracture strain (εqf) and analysis of TPB specimen generated value of Ji. A graph is then plotted between these two parameters for all the digitally generated materials. The best fit straight line determines the correlation. It has been also observed that it is possible to have variation in Ji for the same value of biaxial fracture strain (εqf) within a limit. Such variation in the value of Ji has been also ascertained using the graph. Experimental SPT data acquired earlier for three materials were then used to get Ji by using newly developed correlation. A reasonable comparison of calculated Ji with the values quoted in literature confirmed usefulness of the correlation.

Meaningful work and mental health: job satisfaction as a moderator.

PubMed

Allan, Blake A; Dexter, Chelsea; Kinsey, Rebecca; Parker, Shelby

2018-02-01

Depression, anxiety and stress are common problems for modern workers. Although having meaningful work, or work that is significant, facilitates personal growth, and contributes to the greater good, has been linked to better mental health, people's work might also need to be satisfying or enjoyable to improve outcomes. The purpose of the present study was to examine meaningful work's relation to mental health (i.e. depression, anxiety and stress) and investigate job satisfaction as a moderator of this relation. The study hypotheses were tested with a large, diverse sample recruited from an online source. Partially supporting hypotheses, when controlling for job satisfaction, meaningful work negatively correlated with depression but did not have a significant relation with anxiety and stress. Similarly, job satisfaction negatively predicted depression and stress. Furthermore, the relations between meaningful work and both anxiety and stress were moderated by job satisfaction. Specifically, only people perceiving their work as meaningful and satisfying reported less anxiety and stress. Although continued research is needed, employers and employees may have to target both the meaningfulness and job satisfaction to address the issues of stress and anxiety among working adults.

Perceptions of work stress causes and effective interventions in employees working in public, private and non-governmental organisations: a qualitative study

PubMed Central

Bhui, Kamaldeep; Dinos, Sokratis; Galant-Miecznikowska, Magdalena; de Jongh, Bertine; Stansfeld, Stephen

2016-01-01

Aims and method To identify causes of stress at work as well as individual, organisational and personal interventions used by employees to manage stress in public, private and non-governmental organizations (NGOs). Qualitative interviews were conducted with 51 employees from a range of organisations. Results Participants reported adverse working conditions and management practices as common causes of work stress. Stress-inducing management practices included unrealistic demands, lack of support, unfair treatment, low decision latitude, lack of appreciation, effort–reward imbalance, conflicting roles, lack of transparency and poor communication. Organisational interventions were perceived as effective if they improved management styles, and included physical exercise, taking breaks and ensuring adequate time for planning work tasks. Personal interventions used outside of work were important to prevent and remedy stress. Clinical implications Interventions should improve management practices as well as promoting personal interventions outside of the work setting. PMID:28377811

Work Stress, Burnout, and Social and Personal Resources among Direct Care Workers

PubMed Central

Gray-Stanley, Jennifer A.; Muramatsu, Naoko

2014-01-01

Work stress is endemic among direct care workers (DCWs) who serve people with intellectual and developmental disabilities. Social resources, such as work social support, and personal resources, such as an internal locus of control, may help DCWs perceive work overload and other work-related stressors as less threatening and galvanize them to cope more effectively to prevent burnout. However, little is known about what resources are effective for coping with what types of work stress. Thus, we examined how work stress and social and personal resources are associated with burnout for DCWs. We conducted a survey of DCWs (n = 323) from five community-based organizations that provide residential, vocational, and personal care services for adults with intellectual and developmental disabilities. Participants completed a self-administered survey about their perceptions of work stress, work social support, locus of control, and burnout relative to their daily work routine. We conducted multiple regression analysis to test both the main and interaction effects of work stress and resources with respect to burnout. Work stress, specifically work overload, limited participation decision-making, and client disability care was positively associated with burnout (p < .001). The association between work social support and burnout depended on the levels of work overload (p < .05), and the association between locus of control and burnout depended on the levels of work overload (p < .05) and participation in decision-making (p < .05). Whether work social support and locus of control make a difference depends on the kinds and the levels of work stressors. The findings underscore the importance of strong work-based social support networks and stress management resources for DCWs. PMID:21316918

Do work-related stress and reactivity to stress predict dementia more than 30 years later?

PubMed

Crowe, Michael; Andel, Ross; Pedersen, Nancy L; Gatz, Margaret

2007-01-01

The purpose of this study was to examine associations for work-related stress, reactivity to stress, and subsequent risk of dementia. The sample consisted of members of the population-based Swedish Twin Registry who were participants in the HARMONY study (n=2,049). We used case control and cotwin control designs, with information on work-related stress and reactivity to stress collected as part of a questionnaire completed in 1967. Dementia was diagnosed approximately 30 years later using a 2-stage procedure-screening for cognitive impairment followed by full clinical evaluation. We found that measures of work-related stress (job dissatisfaction and high job demands) were not associated with dementia risk. Greater reactivity to stress predicted higher risk of dementia controlling for age, education, sex, occupational status, alcohol use, and smoking status (odds ratio=1.57, 95% confidence interval 1.08-2.31). Cotwin control analyses also showed that dementia probands were more likely to report high reactivity to stress than their nondemented cotwins. We did not find evidence of an interaction between work stress and reactivity in predicting dementia. Overall, indicators of stress due to environment (ie, work) were not associated with dementia, whereas the individual characteristic of reactivity to stress predicted dementia risk.

Insights into the movements of landslides from combinations of field monitoring and novel direct shear testing

NASA Astrophysics Data System (ADS)

Petley, D. N.; Carey, J.; Massey, C. I.; Brain, M.

2015-12-01

The mechanisms of pre- and post-failure movement of translational landslides remain surprisingly poorly investigated. Previous approaches have focussed on field monitoring, for example through high resolution automated surveying and/or GPS measurements, or from modelling using dedicated codes. There has been some experimental work too, most notably using ring shear devices, although there are limitations as to the type of analyses that can be completed in these devices. In recent years the author has been involved in a series of studies that have sought to understand pre- and post-failure behaviour in translational landslides using both high precision monitoring and experimental investigation using novel apparatus. The latter approach has involved the use of the back pressured shear box, a direct shear machine that allows near-infinite variation of the normal and shear stress state, and measurement and control of the pore water pressure. More recently, a more advanced version of this machine has been developed that allows dynamic loading of both direct and normal shear stresses. This paper presents key lessons learnt about the behaviour of translational landslides from these approaches. The data highlight a number of key elements: The important differences in pre-failure behaviour for materials that show a brittle response compared with those that are ductile. In particular, some aspects of behaviour (e.g. the hyperbolic acceleration to failure) can only be replicated in materials that show brittle cracking processes; In the post-failure domain, all materials show a high level of sensitivity to small changes in pore water pressure when the Factor of Safety is close to unity; Rates of strain are not simply related to pore water pressure / stress state. In particular, some materials show a different deformation response during phases of increasing pore water pressure to that during periods of pore water pressure reduction. The reasons for this require further study; Dynamic behaviour is complex, with variations in behaviour between different materials types being greater than expected. These results show that the behaviour of materials in the post-failure domain is more complex than had been appreciated previously, suggesting that more work is needed to explain landslide behaviour in this regime.

Post-Heading Heat Stress in Rice of South China during 1981-2010

PubMed Central

Shi, Peihua; Tang, Liang; Wang, Lihuan; Sun, Ting; Liu, Leilei; Cao, Weixing; Zhu, Yan

2015-01-01

Frequent extreme heat events are the serious threat to rice production, but the historical trend of heat stress associated with phenology shift and its impact on rice yield over a long period are poorly known. Based on the analysis of observed climate and phenology data from 228 stations in South China during 1981-2010, the spatio-temporal variation of post-heading heat stress was investigated among two single-season rice sub-regions in the northern Middle and Lower Reaches of Yangtze River (S-NMLYtz) and Southwest Plateau (S-SWP), and two double-season early rice sub-regions in the southern Middle and Lower Reaches of Yangtze River (DE-SMLYtz) and Southern China (DE-SC). Post-heading heat stress was more severe in DE-SMLYtz, west S-NMLYtz and east S-SWP than elsewhere, because of rice exposure to the hot season during post-heading stage. The spatial variation of post-heading heat stress was greater in single-season rice region than in double-season early rice region due to the greater spatial variation of heading and maturity dates. Post-heading heat stress increased from 1981 to 2010 in most areas, with significant increases in the east of double-season early rice region and west S-SWP. Phenology shift during 1981-2010 mitigated the increasing trends of heat stress in most areas, but not in west S-SWP. Post-heading heat stress played a dominated role in the reduction of rice yield in South China. Grain yield was more sensitive to post-heading heat stress in double-season early rice region than that in single-season rice region. Rice yield decreased by 1.5%, 6.2%, 9.7% and 4.6% in S-NMLYtz, S-SWP, DE-SMLYtz and DE-SC, respectively, because of post-heading heat stress during 1981-2010, although there were some uncertainties. Given the current level and potential increase of post-heading heat stress in South China, the specific adaptation or mitigation strategies are necessary for different sub-regions to stabilize rice production under heat stress. PMID:26110263

Natural variation reveals relationships between pre-stress carbohydrate nutritional status and subsequent responses to xenobiotic and oxidative stress in Arabidopsis thaliana

PubMed Central

Ramel, Fanny; Sulmon, Cécile; Gouesbet, Gwenola; Couée, Ivan

2009-01-01

Background Soluble sugars are involved in responses to stress, and act as signalling molecules that activate specific or hormone cross-talk transduction pathways. Thus, exogenous sucrose treatment efficiently induces tolerance to the herbicide atrazine in Arabidopsis thaliana plantlets, at least partially through large-scale modifications of expression of stress-related genes. Methods Availability of sugars in planta for stress responses is likely to depend on complex dynamics of soluble sugar accumulation, sucrose–starch partition and organ allocation. The question of potential relationships between endogenous sugar levels and stress responses to atrazine treatment was investigated through analysis of natural genetic accessions of A. thaliana. Parallel quantitative and statistical analysis of biochemical parameters and of stress-sensitive physiological traits was carried out on a set of 11 accessions. Key Results Important natural variation was found between accessions of A. thaliana in pre-stress shoot endogenous sugar levels and responses of plantlets to subsequent atrazine stress. Moreover, consistent trends and statistically significant correlations were detected between specific endogenous sugar parameters, such as the pre-stress end of day sucrose level in shoots, and physiological markers of atrazine tolerance. Conclusions These significant relationships between endogenous carbohydrate metabolism and stress response therefore point to an important integration of carbon nutritional status and induction of stress tolerance in plants. The specific correlation between pre-stress sucrose level and greater atrazine tolerance may reflect adaptive mechanisms that link sucrose accumulation, photosynthesis-related stress and sucrose induction of stress defences. PMID:19789177

Stress Models of the Annual Hydrospheric, Atmospheric, Thermal, and Tidal Loading Cycles on California Faults: Perturbation of Background Stress and Changes in Seismicity

NASA Astrophysics Data System (ADS)

Johnson, Christopher W.; Fu, Yuning; Bürgmann, Roland

2017-12-01

Stresses in the lithosphere arise from multiple natural loading sources that include both surface and body forces. The largest surface loads include near-surface water storage, snow and ice, atmosphere pressure, ocean loading, and temperature changes. The solid Earth also deforms from celestial body interactions and variations in Earth's rotation. We model the seasonal stress changes in California from 2006 through 2014 for seven different loading sources with annual periods to produce an aggregate stressing history for faults in the study area. Our modeling shows that the annual water loading, atmosphere, temperature, and Earth pole tides are the largest loading sources and should each be evaluated to fully describe seasonal stress changes. In California we find that the hydrological loads are the largest source of seasonal stresses. We explore the seasonal stresses with respect to the background principal stress orientation constrained with regional focal mechanisms and analyze the modulation of seismicity. Our results do not suggest a resolvable seasonal variation for the ambient stress orientation in the shallow crust. When projecting the seasonal stresses into the background stress orientation we find that the timing of microseismicity modestly increases from an 8 kPa seasonal mean-normal-stress perturbation. The results suggest that faults in California are optimally oriented with the background stress field and respond to subsurface pressure changes, possibly due to processes we have not considered in this study. At any time a population of faults are near failure as evident from earthquakes triggered by these slight seasonal stress perturbations.

The Relationship between Supervisee Stress, Coping Resources, the Working Alliance, and the Supervisory Working Alliance

ERIC Educational Resources Information Center

Gnilka, Philip B.; Chang, Catherine Y.; Dew, Brian J.

2012-01-01

The authors examined the relationship of perceived stress, specific types of coping resources, the working alliance, and the supervisory working alliance among 232 counselor supervisees. The working alliance and the supervisory working alliance were negatively related to perceived stress and positively related to multiple coping resources. Two…

Evolution of crustal stress, pressure and temperature around shear zones during orogenic wedge formation: a 2D thermo-mechanical numerical study

NASA Astrophysics Data System (ADS)

Markus Schmalholz, Stefan; Jaquet, Yoann

2016-04-01

We study the formation of an orogenic wedge during lithospheric shortening with 2D numerical simulations. We consider a viscoelastoplastic rheology, thermo-mechanical coupling by shear heating and temperature-dependent viscosities, gravity and erosion. In the initial model configuration there is either a lateral temperature variation at the model base or a lateral variation in crustal thickness to generate slight stress variations during lithospheric shortening. These stress variations can trigger the formation of shear zones which are caused by thermal softening associated with shear heating. We do not apply any kind of strain softening, such as reduction of friction angle with progressive plastic strain. The first major shear zone that appears during shortening crosscuts the entire crust and initiates the asymmetric subduction/underthrusting of mainly the mechanically strong lower crust. After some deformation, the first shear zone in the upper crust is abandoned, the deformation propagates towards the foreland and a new shear zone forms only in the upper crust. The shear zone propagation occurs several times where new shear zones form in the upper crust and the mechanically strong top of the lower crust acts as detachment horizon. We calculate the magnitudes of the maximal and minimal principal stresses and of the mean stress (or dynamic pressure), and we record also the temperature for several marker points in the upper and lower crust. We analyse the evolution of stresses and temperature with burial depth and time. Deviatoric stresses (half the differential stress) in the upper crust are up to 200 MPa and associated shear heating in shear zones ranges between 40 - 80 °C. Lower crustal rocks remain either at the base of the orogenic wedge at depths of around 50 km or are subducted to depths of up to 120 km, depending on their position when the first shear zone formed. Largest deviatotric stresses in the strong part of the lower crust are about 1000 MPa and maximal shear heating in shear zones is approximately 200 °C. Marker points can migrate through the main shear zone in the lower crust which remains active throughout lithospheric shortening. Some pressure-temperature paths show an anti-clockwise evolution. The impact of various model parameters on the results is discussed as well as applications of the results to geological data.

Compassion Fatigue in Pediatric Nurses.

PubMed

Berger, Jill; Polivka, Barbara; Smoot, Elizabeth Ann; Owens, Heather

2015-01-01

Compassion fatigue in nursing has been shown to impact the quality of patient care and employee satisfaction and engagement. The aims of this study were to determine the prevalence and severity of compassion fatigue among pediatric nurses and variations in prevalence based on respondent demographics using a cross-sectional survey design. Nurses under 40 years of age, with 6-10 years of experience and/or working in a medical-surgical unit had significantly lower compassion satisfaction and higher levels of burnout. Secondary traumatic stress from caring for children with severe illness or injury or end of life was a key contributor to compassion fatigue. Copyright © 2015 Elsevier Inc. All rights reserved.

Incremental analysis of large elastic deformation of a rotating cylinder

NASA Technical Reports Server (NTRS)

Buchanan, G. R.

1976-01-01

The effect of finite deformation upon a rotating, orthotropic cylinder was investigated using a general incremental theory. The incremental equations of motion are developed using the variational principle. The governing equations are derived using the principle of virtual work for a body with initial stress. The governing equations are reduced to those for the title problem and a numerical solution is obtained using finite difference approximations. Since the problem is defined in terms of one independent space coordinate, the finite difference grid can be modified as the incremental deformation occurs without serious numerical difficulties. The nonlinear problem is solved incrementally by totaling a series of linear solutions.

Psychosocial burden among offshore drilling platform employees.

PubMed

Leszczyńska, Irena; Jeżewska, Maria

2010-01-01

Conditions of work on offshore drilling platforms are particularly hard due to extreme environmental situations created both by nature and technological processes. Oil drilling workers employed on the open sea are potentially exposed to permanently high stress. Apart from the obvious objective factors affecting drilling platform employees, a great role in the general work-related stress level is played by the working conditions and work-related psychosocial factors, defined according to Karask's concept as demands, control, and social support. A total of 184 drill platform workers were examined using objective and subjective research methods. The level of subjective stress among drilling platform workers is lower than the level of objective stress and the stress resulting from prognoses related with specificity of work in extremely hard conditions (audit). The examinations of drilling platform workers reveal a positive role of stress in psychological adaptation, being a special case of the "work ethos" and attachment to the firm. In such investigations of work-related stress on drilling platforms, which are very specific workplaces, a multi-aspect character, sociological and economic aspects, organizational culture conditions in the firm, and a tendency to conceal ailments and the stress experienced should be taken into account. It is important to apply measures referring to at least three different types of evidence (objective demands, subjective stress, health problems reported). Otherwise, the result reflecting work-related stress may not be objective and far from the truth.

Work stress, occupational burnout and depression levels: a clinical study of paediatric intensive care unit nurses in Taiwan.

PubMed

Lin, Tzu-Ching; Lin, Huey-Shyan; Cheng, Su-Fen; Wu, Li-Min; Ou-Yang, Mei-Chen

2016-04-01

This study aimed to examine the relationship between work stress and depression; and investigate the mediating effect of occupational burnout among nurses in paediatric intensive care units. The relationships among work stress, occupational burnout and depression level have been explored, neither regarding occupational burnout as the mediating role that causes work stress to induce depression nor considering the paediatric intensive care unit context. A cross-sectional correlational design was conducted. One hundred and forty-four female paediatric intensive care unit nurses from seven teaching hospitals in southern Taiwan were recruited as the participants. Data were collected by structured questionnaires including individual demographics, the Nurse Stress Checklist, the Occupational Burnout Inventory and the Taiwan Depression Questionnaire. The results indicated that after controlling for individual demographic variables, the correlations of work stress with occupational burnout, as well as work stress and occupational burnout with depression level were all positive. Furthermore, occupational burnout may exert a partial mediating effect on the relationship between work stress and depression level. This study provides information about work stress, occupational burnout and depression level, and their correlations, as well as the mediating role of occupational burnout among paediatric intensive care unit nurses. It suggests government departments and hospital administrators when formulating interventions to prevent work stress and occupational burnout. These interventions can subsequently prevent episodes of depression in paediatric intensive care unit nurses, thereby providing patients with a safe and high-quality nursing environment. © 2016 John Wiley & Sons Ltd.

Overtime work and stress response in a group of Japanese workers.

PubMed

Sato, Yuji; Miyake, Hitoshi; Thériault, Gilles

2009-01-01

Working long overtime hours is considered a cause of mental health problems among workers but such a relationship has yet to be empirically confirmed. To clarify the influence of overtime work on response to stress and to assess the role of other stress-related factors on this relationship. The study was conducted among 24 685 employees of a company in Japan. Stress response, job stressors and social supports were assessed by the Brief Job Stress Questionnaire. Participants were divided into five categories of overtime (0-19, 20-39, 40-59, >or=60 h of overtime per month and exempted employees). The nonadjusted odds ratios for stress response for 40-59 and >or=60 overtime hours per month in reference to 0-19 overtime hours were 1.11 [95% confidence interval (CI) 1.03-1.19] and 1.62 (95% CI 1.50-1.76), respectively. After adjustment for self-assessed amount of work, mental workload and sleeping time, the association between overtime work and stress response disappeared. This large cross-sectional study shows that overtime work appears to influence stress response indirectly through other stress factors such as self-assessed amount of work, mental workload and sleeping time.

The Effects of Stress at Work and at Home on Inflammation and Endothelial Dysfunction

PubMed Central

Non, Amy L.; Rimm, Eric B.; Kawachi, Ichiro; Rewak, Marissa A.; Kubzansky, Laura D.

2014-01-01

This study examined whether stress at work and at home may be related to dysregulation of inflammation and endothelial function, two important contributors to the development of cardiovascular disease. In order to explore potential biological mechanisms linking stress with cardiovascular health, we investigated cross-sectional associations between stress at work and at home with an inflammation score (n's range from 406–433) and with two endothelial biomarkers (intercellular and vascular adhesion molecules, sICAM-1 and sVCAM-1; n's range from 205–235) in a cohort of healthy US male health professionals. No associations were found between stress at work or at home and inflammation. Men with high or medium levels of stress at work had significantly higher levels of sVCAM-1 (13% increase) and marginally higher levels of sICAM-1 (9% increase), relative to those reporting low stress at work, independent of health behaviors. Men with high levels of stress at home had marginally higher levels of both sVCAM-1 and sICAM-1 than those with low stress at home. While lack of findings related to inflammation are somewhat surprising, if replicated in future studies, these findings may suggest that endothelial dysfunction is an important biological mechanism linking stress at work with cardiovascular health outcomes in men. PMID:24722508

Where does work stress come from? A generalizability analysis of stress in police officers.

PubMed

Lucas, Todd; Weidner, Nathan; Janisse, James

2012-01-01

Differences among workers and workplace stressors both contribute to perceiving work as stressful. However, the relative importance of these sources to work stress is not well delineated. Moreover, the extent to which work stress additionally reflects unique matches between specific workers and particular job stressors is also unclear. In this study, we use generalizability theory to specify and compare sources of variance in stress associated with police work. US police officers (N = 115) provided ratings of 60 stressors commonly associated with policing duties. Primary and secondary stress appraisal ratings reflected differences among officers in tendencies to generally perceive work stressors as stressful (14-15% officer effect), and also agreement among officers in viewing some stressors as more stressful than others (18-19% stressor effect). However, ratings especially reflected distinct pairings of officers and stressors (38-41% interaction effect). Additional analyses revealed individual differences and stressor characteristics associated with each variance component, including an officer × stressor interaction - compared to officers low in neuroticism, highly neurotic officers provided lower primary appraisal ratings of stressors generally seen as not serious, and also higher primary appraisal ratings of stressors that were seen as serious. We discuss implications of the current approach for the continued study of stress at work.

The effects of stress at work and at home on inflammation and endothelial dysfunction.

PubMed

Non, Amy L; Rimm, Eric B; Kawachi, Ichiro; Rewak, Marissa A; Kubzansky, Laura D

2014-01-01

This study examined whether stress at work and at home may be related to dysregulation of inflammation and endothelial function, two important contributors to the development of cardiovascular disease. In order to explore potential biological mechanisms linking stress with cardiovascular health, we investigated cross-sectional associations between stress at work and at home with an inflammation score (n's range from 406-433) and with two endothelial biomarkers (intercellular and vascular adhesion molecules, sICAM-1 and sVCAM-1; n's range from 205-235) in a cohort of healthy US male health professionals. No associations were found between stress at work or at home and inflammation. Men with high or medium levels of stress at work had significantly higher levels of sVCAM-1 (13% increase) and marginally higher levels of sICAM-1 (9% increase), relative to those reporting low stress at work, independent of health behaviors. Men with high levels of stress at home had marginally higher levels of both sVCAM-1 and sICAM-1 than those with low stress at home. While lack of findings related to inflammation are somewhat surprising, if replicated in future studies, these findings may suggest that endothelial dysfunction is an important biological mechanism linking stress at work with cardiovascular health outcomes in men.

Stress at the place of work and cognitive functions among women performing intellectual work during peri- and post-menopausal period.

PubMed

Gujski, Mariusz; Pinkas, Jarosław; Juńczyk, Tomasz; Pawełczak-Barszczowska, Adrianna; Raczkiewicz, Dorota; Owoc, Alfred; Bojar, Iwona

2017-10-06

The analysis of the relationship between stress at work and results of cognitive functions amongst women, at peri- and post-menopausal age, performing intellectual work. The study group included women, aged 45-66 years old, employed as intellectual workers. Research instruments were: the Montreal Cognitive Assessment; computer tests of the CNS Vital Signs; the Subjective Work Characteristics Questionnaire, and a questionnaire designed by the author. The results were statistically analyzed. Nearly a half of respondents experienced high stress at the place of work; 1/3 - on the average level, on a low level - every fifth. The largest number of respondents experienced stress caused by social contacts. Among a half of the women, stress was caused by the lack of awards at work, followed by the lack of support. Slightly fewer of them experienced stress caused by the feeling of psychological load related to the complexity of work or the feeling of uncertainty caused by the organization of work. Every third woman experienced stress due to the sense of responsibility or the lack of control. The smallest number experienced stress caused by physical arduousness, the sense of threat and unpleasant working conditions. The examined women obtained the best results with respect to simple attention, the worst results - with respect to the reaction time. The results concerning the remaining 9 cognitive functions were ranked in the middle of the aforementioned results. The intensity of stress at work and factors which caused this stress, negatively correlated with simple attention of women in the early peri-menopausal period, while positively correlating with the psychomotor and processing speed of women in the late peri-menopausal period. Among the post-menopausal women, negative correlations were observed between the majority of cognitive functions and the intensity of stress at work, and the majority of factors which caused this stress. Cognitive functions of the examined women remained within the range of average evaluations, and were correlated with stress-inducing factors at the place of work. Int J Occup Med Environ Health 2017;30(6):943-961. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Modeling of flow stress size effect based on variation of dislocation substructure in micro-tension of pure nickel

NASA Astrophysics Data System (ADS)

Wang, Chuanjie; Liu, Huan; Zhang, Ying; Chen, Gang; Li, Yujie; Zhang, Peng

2017-12-01

Micro-forming is one promising technology for manufacturing micro metal parts. However, the traditional metal-forming theories fail to analyze the plastic deformation behavior in micro-scale due to the size effect arising from the part geometry scaling down from macro-scale to micro-scale. To reveal the mechanism of plastic deformation behavior size effect in micro-scale, the geometrical parameters and the induced variation of microstructure by them need to be integrated in the developed constitutive models considering the free surface effect. In this research, the variations of dislocation cell diameter with original grain size, strain and location (surface grain or inner grain) are derived according the previous research data. Then the overall flow stress of the micro specimen is determined by employing the surface layer model and the relationship between dislocation cell diameter and the flow stress. This new developed constitutive model considers the original grain size, geometrical dimension and strain simultaneously. The flow stresses in micro-tensile tests of thin sheets are compared with calculated results using the developed constitutive model. The calculated and experimental results match well. Thus the validity of the developed constitutive model is verified.

Work-related stress and associated factors among nurses working in public hospitals of Addis Ababa, Ethiopia: a cross-sectional study.

PubMed

Salilih, Selamawit Zewdu; Abajobir, Amanuel Alemu

2014-08-01

Work-related stress is a pattern of reactions to work demands unmatched to nurses' knowledge, skills, or abilities; these challenges exceed their ability to cope, resulting in burnout, turnover, and low quality patient care. An institution-based cross-sectional study of 343 nurses was conducted in public hospitals of Addis Ababa in 2012. Data were collected by pretested and self-administered questionnaires using a nursing stress scale. One hundred twenty-one (37.8%) (95% confidence interval: 34.3 to 39.1) nurses reported experiencing occupational stress. Significant associations were found between nurses' stress and gender, work shift, illness, marital status, and worksite or unit. Prevalence of work-related stress was higher than expected and opportunities exist for stake holders to design stress reduction and management programs for nurses. Copyright 2014, SLACK Incorporated.

Stress at work: Differential experiences of high versus low SES workers.

PubMed

Damaske, Sarah; Zawadzki, Matthew J; Smyth, Joshua M

2016-05-01

This paper asks whether workers with higher socioeconomic status (SES) experience different levels of stress at work than workers with lower SES and, if so, what might explain these differences. We collected innovative assessments of immediate objective and subjective measures of stress at multiple time points across consecutive days from 122 employed men and women. We find that in comparison to higher SES individuals, those with lower SES reported greater happiness at work, less self-reported stress, and less perceived stress; cortisol, a biological marker of stress, was unrelated to SES. Worker's momentary perceptions of the workplace were predicted by SES, with higher SES individuals more commonly reporting feeling unable to meet work demands, fewer work resources, and less positive work appraisals. In turn, perceptions of the workplace had a generally consistent and robust effect on positive mood, subjective stress, and cortisol. Copyright © 2016 Elsevier Ltd. All rights reserved.

Stress at Work: Differential Experiences of High versus Low SES Workers

PubMed Central

Damaske, Sarah; Zawadzki, Matthew J.; Smyth, Joshua M.

2016-01-01

This paper asks whether workers with greater socioeconomic status (SES) experience different levels of stress at work than workers with lower SES and, if so, what might explain these differences. We collected innovative assessments of immediate objective and subjective measures of stress at multiple time points across consecutive days from 122 employed men and women. We find that in comparison to higher SES individuals, those with lower SES reported greater happiness at work, less self-reported stress, and less perceived stress; cortisol, a biological marker of stress, was unrelated to SES. Worker's momentary perceptions of the workplace were predicted by SES, with higher SES individuals more commonly reporting feeling unable to meet work demands, fewer work resources, and less positive work appraisals. In turn, perceptions of the workplace had a generally consistent and robust effect on positive mood, subjective stress, and cortisol. PMID:27038320

Chronic and Acute Stress, Gender, and Serotonin Transporter Gene-Environment Interactions Predicting Depression Symptoms in Youth

ERIC Educational Resources Information Center

Hammen, Constance; Brennan, Patricia A.; Keenan-Miller, Danielle; Hazel, Nicholas A.; Najman, Jake M.

2010-01-01

Background: Many recent studies of serotonin transporter gene by environment effects predicting depression have used stress assessments with undefined or poor psychometric methods, possibly contributing to wide variation in findings. The present study attempted to distinguish between effects of acute and chronic stress to predict depressive…

Police Work Absence: An Analysis of Stress and Resiliency

PubMed Central

Fekedulegn, Desta; Hartley, Tara A.; Andrew, Michael E.; Charles, Luenda; Tinney-Zara, Cathy A.; Burchfiel, Cecil M.

2015-01-01

Police work is a high stress occupation and stress has been implicated in work absence. The present study examined (1) associations between specific types of police stress and work absences, (2) distinctions between “voluntary” (1-day) and “involuntary” (> 3-days) absences; and (3) the modifying effect of resiliency. Officers (n=337) from the Buffalo Cardio-Metabolic Occupational Police Stress study were included in the present study. The sample was 72% male, 77% Caucasian, 73% married, and 75% patrol officers. Mean age was 41 years (SD=6.4). Measures included: the Spielberger Police Stress Survey, 1-year payroll absence data, and the Dispositional Resilience Scale. The negative binomial regression was used to estimate rate ratios (RR) of 1-day and >3-days work absences for increasing stress scores. Models were adjusted for age, race/ethnicity, rank, smoking status, alcohol intake, and sleep duration. For one-unit increase in stress scores, the covariate adjusted RRs for one-day work absences were: total stress score (RR=1.19, 95% CI: 1.04–1.36); administrative stress (RR=1.52, 95% CI: 1.05–2.18); physical/psychological stress (RR=1.54, 95% CI: 1.14–2.07); and lack of support (RR=1.75, 95% CI: 1.01–3.05). Results suggest that officers were more likely to take voluntary 1-day absences due to specific types of stress at work. When the entire sample was considered, there was no significant association between police specific stress and episodes of work absence lasting at least three consecutive days. Hardy individuals, including those with high scores on the challenge sub-score, may use 1-day absences as a positive coping strategy. PMID:26709384

An embedded stress sensor for concrete SHM based on amorphous ferromagnetic microwires.

PubMed

Olivera, Jesús; González, Margarita; Fuente, José Vicente; Varga, Rastislav; Zhukov, Arkady; Anaya, José Javier

2014-10-24

A new smart concrete aggregate design as a candidate for applications in structural health monitoring (SHM) of critical elements in civil infrastructure is proposed. The cement-based stress/strain sensor was developed by utilizing the stress/strain sensing properties of a magnetic microwire embedded in cement-based composite (MMCC). This is a contact-less type sensor that measures variations of magnetic properties resulting from stress variations. Sensors made of these materials can be designed to satisfy the specific demand for an economic way to monitor concrete infrastructure health. For this purpose, we embedded a thin magnetic microwire in the core of a cement-based cylinder, which was inserted into the concrete specimen under study as an extra aggregate. The experimental results show that the embedded MMCC sensor is capable of measuring internal compressive stress around the range of 1-30 MPa. Two stress sensing properties of the embedded sensor under uniaxial compression were studied: the peak amplitude and peak position of magnetic switching field. The sensitivity values for the amplitude and position within the measured range were 5 mV/MPa and 2.5 µs/MPa, respectively.

Relationship Between Earthquake b-Values and Crustal Stresses in a Young Orogenic Belt

NASA Astrophysics Data System (ADS)

Wu, Yih-Min; Chen, Sean Kuanhsiang; Huang, Ting-Chung; Huang, Hsin-Hua; Chao, Wei-An; Koulakov, Ivan

2018-02-01

It has been reported that earthquake b-values decrease linearly with the differential stresses in the continental crust and subduction zones. Here we report a regression-derived relation between earthquake b-values and crustal stresses using the Anderson fault parameter (Aϕ) in a young orogenic belt of Taiwan. This regression relation is well established by using a large and complete earthquake catalog for Taiwan. The data set consists of b-values and Aϕ values derived from relocated earthquakes and focal mechanisms, respectively. Our results show that b-values decrease linearly with the Aϕ values at crustal depths with a high correlation coefficient of -0.9. Thus, b-values could be used as stress indicators for orogenic belts. However, the state of stress is relatively well correlated with the surface geological setting with respect to earthquake b-values in Taiwan. Temporal variations in the b-value could constitute one of the main reasons for the spatial heterogeneity of b-values. We therefore suggest that b-values could be highly sensitive to temporal stress variations.

Stress and deformation analysis of tapered cantilever castellated beam using numerical method

NASA Astrophysics Data System (ADS)

Ilham Maulana, Taufiq; Soebandono, Bagus; Satria Jagad, Beta; Prayuda, Hakas

2018-05-01

The castellated beam is often used in buildings because of its lighter weight compared with a normal steel beam. There are many types of an opening in the castellated beam, one of which is hexagonal openings. This paper will discuss the analysis of stress and deformation on castellated beam with a variation of openings diameter, space between holes, and angle of hexagonal openings. Furthermore, stress distribution on specimen will be seen under static loading. This study used IWF section 150x75x5x7 with 4 variations of the span with one fixed support, and yield strength is 400 MPa. Linear finite element analysis is used with 10-node tetrahedron solid element, by observing von Misses stress. The software used in this study are freeware, which is LISAFEA 8.0 for analyzing and FreeCAD for drawing. The result shows that value of stress and deformation for each sample is quite volatile, but it can be concluded that stress distribution around the opening is larger than in web and flange.

[Occupational stress effects on work ability in chemistry workers].

PubMed

Yang, Huifang; Wang, Mianzhen; Wang, Zhiming; Lan, Yajia

2004-03-01

Investigating the status of work ability and occupational stress in 1030 chemistry workers at levels of chemical materials and explore their relationship and influence factors (481 workers of study group, 549 workers of control group). Work ability and occupational stress were measured with the work ability index (WAI) and occupational stress questionnaire (OSQ). The risk factors of work ability decline were evaluated. WAI and OSQ scores scores are significantly different between study group and control group (P < 0.01), and work ability correlated inversely with occupational stress (P < 0.01). The WAI scores are reducing with a higher of the OSQ. The work ability of chemistry-workers became lower with the increasing of age. Variables that influence work ability included the factors of disorder of musculoskeletal function (OR = 2.884), assessment of the current health (OR = 2.651), the diseases (OR = 2.498), emotion status (OR = 2.407), physical load (OR = 1.254) and lack of exercise (OR = 1.956). The stress levels and stress factors had affected work ability in chemistry-workers, and it was suggested that the findings could be helpful for the measures protecting and promoting of work ability on the health of workers.

Psychosocial work stress, leisure time physical exercise and the risk of chronic pain in the neck/shoulders: Longitudinal data from the Norwegian HUNT Study.

PubMed

Fanavoll, Rannveig; Nilsen, Tom Ivar Lund; Holtermann, Andreas; Mork, Paul Jarle

2016-01-01

To prospectively investigate if the risk of chronic neck/shoulder pain is associated with work stress and job control, and to assess if physical exercise modifies these associations. The study population comprised 29 496 vocationally active women and men in the Norwegian Nord-Trøndelag Health Study (HUNT Study) without chronic pain at baseline in 1984-1986. Chronic neck/shoulder pain was assessed during a follow-up in 1995-1997. A generalized linear model (Poisson regression) was used to calculate adjusted relative risks (RRs). Work stress was dosedependently associated with the risk of neck/shoulder pain (ptrend < 0.001 in both sexes). The women and men who perceived their work as stressful "almost all the time" had multi-adjusted RRs = 1.27 (95% confidence interval (CI): 1.1-1.47) and 1.71 (95% CI: 1.46-2), respectively, referencing those with no stressful work. Work stress interacted with sex (p < 0.001). Poor job control was not associated with the risk of neck/shoulder pain among the women (RR = 1.04, 95% CI: 0.92-1.19) nor the men (RR = 1.09, 95% CI: 0.95-1.26). Combined analyses showed an inverse dose-dependent association between hours of physical exercise/week and the risk of neck/shoulder pain in the men with no stressful work (ptrend = 0.05) and among the men who perceived their work as "rarely stressful" (ptrend < 0.02). This effect was not statistically significant among the women or among men with more frequent exposure to work stress. Work stress is an independent predictor of chronic neck/shoulder pain and the effect is stronger in men than in women. Physical exercise does not substantially reduce the risk among the persons with frequent exposure to work stress. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Relationship between psychosocial stress dimensions and salivary cortisol in military police officers 1

PubMed Central

Tavares, Juliana Petri; Lautert, Liana; Magnago, Tânia Solange Bosi de Souza; Consiglio, Angélica Rosat; Pai, Daiane Dal

2017-01-01

Abstract Objective: to analyze the relationship between psychosocial stress dimensions and salivary cortisol in military police officers. Method: cross-sectional and analytical study with 134 military police officers. The Effort-Reward Imbalance (ERI) Model scale has been used to assess psychosocial stress. Salivary cortisol was collected in three samples. The following tests were used: Student's t-test, Mann-Whitney, ANOVA, Bonferroni, Kruskal-Wallis and Dunn. Pearson and Spearman correlation methods were used, as well as multiple linear regression. Cortisol at night showed an ascending statistical association with the psychosocial reward (p=0.004) and a descending association with the effort-impairment scores (p=0.017). Being part of the Special Tactical Operations Group (GATE) and the diastolic blood pressure explained 13.5% of the variation in cortisol levels on waking up. The sectors GATE, Special Patrol of the Elite Squad of the Military Police and Motorcyclists explained 21.9% of the variation in cortisol levels 30-minute after awakening. The variables GATE sector and Effort Dimension explained 27.7% of the variation in cortisol levels at night. Conclusion: it was evidenced that salivary cortisol variation was influenced by individual, labor and psychosocial variables. PMID:28443994

Relationship between psychosocial stress dimensions and salivary cortisol in military police officers.

PubMed

Tavares, Juliana Petri; Lautert, Liana; Magnago, Tânia Solange Bosi de Souza; Consiglio, Angélica Rosat; Pai, Daiane Dal

2017-04-20

to analyze the relationship between psychosocial stress dimensions and salivary cortisol in military police officers. cross-sectional and analytical study with 134 military police officers. The Effort-Reward Imbalance (ERI) Model scale has been used to assess psychosocial stress. Salivary cortisol was collected in three samples. The following tests were used: Student's t-test, Mann-Whitney, ANOVA, Bonferroni, Kruskal-Wallis and Dunn. Pearson and Spearman correlation methods were used, as well as multiple linear regression. Cortisol at night showed an ascending statistical association with the psychosocial reward (p=0.004) and a descending association with the effort-impairment scores (p=0.017). Being part of the Special Tactical Operations Group (GATE) and the diastolic blood pressure explained 13.5% of the variation in cortisol levels on waking up. The sectors GATE, Special Patrol of the Elite Squad of the Military Police and Motorcyclists explained 21.9% of the variation in cortisol levels 30-minute after awakening. The variables GATE sector and Effort Dimension explained 27.7% of the variation in cortisol levels at night. it was evidenced that salivary cortisol variation was influenced by individual, labor and psychosocial variables.

Stress and deformation analysis of double curvature arc dams using finite element method (FEM): A case of budhi gandaki hydropower project

NASA Astrophysics Data System (ADS)

Mishra, Aanand Kumar; Singh, Ajay; Bahadur Singh, Akal

2018-06-01

High rise arc dams are widely used in the development of storage type hydropower project because of the economic advantage. Among different phases considered during the lifetime of dam, control of dam’s safety and performance becomes more concerned during the lifetime. This paper proposed the 3 – D finite element method (FEM) for stress and deformation analysis of double curvature arc dam considering the non – linearity of foundation rock following the Hoek – Brown Criterion. The proposed methodology is implemented through MATLAB scripting language and studied the double curvature arc dam proposed for Budhi Gandaki hydropower project. The stress developed in the foundation rock, compressive and tensile stress acting on the dam are investigated and analysed for the reservoir level variation. Deformation at the top of the dam and in the foundation rock is also investigated. In addition to that, stress and deformation variation in the foundation rock is analysed for various rock properties.