Modeling OPC complexity for design for manufacturability

NASA Astrophysics Data System (ADS)

Gupta, Puneet; Kahng, Andrew B.; Muddu, Swamy; Nakagawa, Sam; Park, Chul-Hong

2005-11-01

Increasing design complexity in sub-90nm designs results in increased mask complexity and cost. Resolution enhancement techniques (RET) such as assist feature addition, phase shifting (attenuated PSM) and aggressive optical proximity correction (OPC) help in preserving feature fidelity in silicon but increase mask complexity and cost. Data volume increase with rise in mask complexity is becoming prohibitive for manufacturing. Mask cost is determined by mask write time and mask inspection time, which are directly related to the complexity of features printed on the mask. Aggressive RET increase complexity by adding assist features and by modifying existing features. Passing design intent to OPC has been identified as a solution for reducing mask complexity and cost in several recent works. The goal of design-aware OPC is to relax OPC tolerances of layout features to minimize mask cost, without sacrificing parametric yield. To convey optimal OPC tolerances for manufacturing, design optimization should drive OPC tolerance optimization using models of mask cost for devices and wires. Design optimization should be aware of impact of OPC correction levels on mask cost and performance of the design. This work introduces mask cost characterization (MCC) that quantifies OPC complexity, measured in terms of fracture count of the mask, for different OPC tolerances. MCC with different OPC tolerances is a critical step in linking design and manufacturing. In this paper, we present a MCC methodology that provides models of fracture count of standard cells and wire patterns for use in design optimization. MCC cannot be performed by designers as they do not have access to foundry OPC recipes and RET tools. To build a fracture count model, we perform OPC and fracturing on a limited set of standard cells and wire configurations with all tolerance combinations. Separately, we identify the characteristics of the layout that impact fracture count. Based on the fracture count (FC) data from OPC and mask data preparation runs, we build models of FC as function of OPC tolerances and layout parameters.

Formal design and verification of a reliable computing platform for real-time control. Phase 1: Results

NASA Technical Reports Server (NTRS)

Divito, Ben L.; Butler, Ricky W.; Caldwell, James L.

1990-01-01

A high-level design is presented for a reliable computing platform for real-time control applications. Design tradeoffs and analyses related to the development of the fault-tolerant computing platform are discussed. The architecture is formalized and shown to satisfy a key correctness property. The reliable computing platform uses replicated processors and majority voting to achieve fault tolerance. Under the assumption of a majority of processors working in each frame, it is shown that the replicated system computes the same results as a single processor system not subject to failures. Sufficient conditions are obtained to establish that the replicated system recovers from transient faults within a bounded amount of time. Three different voting schemes are examined and proved to satisfy the bounded recovery time conditions.

Interdependency of Reactive Oxygen Species generating and scavenging system in salt sensitive and salt tolerant cultivars of rice.

PubMed

Kaur, Navdeep; Dhawan, Manish; Sharma, Isha; Pati, Pratap Kumar

2016-06-10

Salinity stress is a major constrain in the global rice production and hence serious efforts are being undertaken towards deciphering its remedial strategies. The comparative analysis of differential response of salt sensitive and salt tolerant lines is a judicious approach to obtain essential clues towards understanding the acquisition of salinity tolerance in rice plants. However, adaptation to salt stress is a fairly complex process and operates through different mechanisms. Among various mechanisms involved, the reactive oxygen species mediated salinity tolerance is believed to be critical as it evokes cascade of responses related to stress tolerance. In this background, the present paper for the first time evaluates the ROS generating and the scavenging system in tandem in both salt sensitive and salt tolerant cultivars of rice for getting better insight into salinity stress adaptation. Comparative analysis of ROS indicates the higher level of hydrogen peroxide (H2O2) and lower level of superoxide ions (O(2-)) in the salt tolerant as compared to salt sensitive cultivars. Specific activity of ROS generating enzyme, NADPH oxidase was also found to be more in the tolerant cultivars. Further, activities of various enzymes involved in enzymatic and non enzymatic antioxidant defence system were mostly higher in tolerant cultivars. The transcript level analysis of antioxidant enzymes were in alignment with the enzymatic activity. Other stress markers like proline were observed to be higher in tolerant varieties whereas, the level of malondialdehyde (MDA) equivalents and chlorophyll content were estimated to be more in sensitive. The present study showed significant differences in the level of ROS production and antioxidant enzymes activities among sensitive and tolerant cultivars, suggesting their possible role in providing natural salt tolerance to selected cultivars of rice. Our study demonstrates that the cellular machinery for ROS production and scavenging system works in an interdependent manner to offer better salt stress adaptation in rice. The present work further highlights that the elevated level of H2O2 which is considered as a key determinant for conferring salt stress tolerance to rice might have originated through an alternative route of photocatalytic activity of chlorophyll.

Perceived organizational tolerance for workplace harassment and distress and drinking over time [harassment and mental health].

PubMed

Richman, Judith A; Rospenda, Kathleen M; Flaherty, Joseph A; Freels, Sally; Zlatoper, Ken

2004-01-01

Research has linked workplace harassment and abuse with distress and drinking. However, increasing societal attention to sexual harassment (SH) has been accompanied by pressures on work organizations to censure harassing behaviors. We address altered perceptions of the organizational tolerance (OT) for SH and generalized workplace abuse (GWA), changes in the prevalence and incidence of these experiences, and their impact on distress and drinking behaviors. A cohort of workers completed a mail survey at three points in time. Questionnaires assessed perceptions of OT for SH and GWA, experiences of SH and GWA, coping, and distress and drinking behaviors. Both sexes perceived that tolerance of SH and GWA has decreased over time. Changes in reported prevalence of these experiences differed by gender, and incidence for both genders decreased more strongly than prevalence. The linkages between SH/GWA and distress and drinking changed over time, but in different ways for women and men. SH and GWA still have deleterious consequences, and replications of this research and greater efforts at prevention are needed.

Strategies for Suicide Intervention by Telephone.

ERIC Educational Resources Information Center

Hinson, Jennifer

1982-01-01

Describes techniques helpful for telephone counselors dealing with suicide intervention, including reinstating control, reducing anxiety through problem clarification, and providing hope by active listening and tolerance of dispositions. The use of time-outs and detective work is also discussed. (JAC)

[Measles-Mumps-Rubella vaccination of an egg-allergic child sensitized to gelatin].

PubMed

Dumortier, B; Nosbaum, A; Ponvert, C; Nicolas, J-F; Bérard, F

2013-08-01

The Measles-Mumps-Rubella (MMR) vaccine is often postponed in egg-allergic patients due to fear of anaphylactic reaction at the time of injection of this vaccin produced on egg derivates. However, this vaccine is recommended by health authorities, especially in case of increased measles incidence, and international recommendations indicate that there is no need for predictive allergological work-up and that the MMR vaccine is well tolerated in egg-allergic patients. We report on the case of a 12-year-old child with severe immediate-type egg allergy. Immediate-reading intradermal skin tests performed prior to the MMR vaccine were positive. Subsequent allergological work-up revealed a gelatin sensitization, and the child tolerated injections of the vaccine given according to a tolerance induction protocol. Gelatin is used as a stabilizer in numerous vaccines and may be responsible for immediate-type hypersentivity reactions to gelatin-containing vaccines. In case of reaction induced by the MMR vaccine, one needs to explore a potential gelatin sensitization/allergy. The MMR vaccine should be given and is well tolerated in patients with immediate-type egg hypersensitivity, even when gelatin sensitization is combined. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Alternative theories: Pregnancy and immune tolerance.

PubMed

Bonney, Elizabeth A

2017-09-01

For some time, reproductive immunologists have worked to understand the balance between maternal tolerance of the fetus, maternal health, and fetal protection which leads to successful pregnancy in mammalian species. We have always understood the potential importance of multiple factors, including nutrition, genetics, anatomy, hormonal regulation, environmental insult and many others. Yet, we still struggle to combine our knowledge of these factors and immunology to finally understand complex diseases of pregnancy, such as preeclampsia. Data, and potentially other factors (e.g. politics, economics), support the work to fit pregnancy into classical immune theory driven by the concept of self-non-self-discrimination. However, based on data, many classical theorists call pregnancy "a special case." This review is a first-pass suggestion to attempt to view three models of immune system activation and tolerance as potential alternatives to classical self-non-self-discrimination and to propose a theoretical framework to view them in the context of pregnancy. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluating the tolerability and acceptability of an alcohol-based hand rub - real-life experience with the WHO protocol.

PubMed

Wolfensberger, Aline; Durisch, Nina; Mertin, Juliane; Ajdler-Schaeffler, Evelyne; Sax, Hugo

2015-01-01

Optimizing user satisfaction with alcohol-based hand rubs (ABHR) may be vital to enhance hand hygiene performance. This study tested the tolerability and acceptability of a new ABHR (EVO9; Ecolab) in healthcare workers under daily working conditions and evaluated the practicability of the corresponding WHO protocol. We strictly applied the WHO single product ABHR evaluation protocol. A trained observer assessed hand skin conditions of healthy volunteers using at least 30 ml ABHR per day during their clinical work at baseline, day 3-5 and one month (visit 1-3). Participants rated ABHR tolerability and acceptability at visit 2 and 3. Additionally, we registered study time for participants and study team. Among 46 volunteers, 76% were female; 37% nurses, 28% physicians. Skin was observer-rated "not" or "incidentally" dry in 64.4%, 77.8%, and 90.9% participants at visit 1, 2, and 3, respectively. EVO9 was scored ≥5 (progressive scale, 1-7) for appearance, intactness, moisture content, and sensation by 95.7%, 97.7%, 88.9%, and 97.8% participants at visit 3, respectively. All WHO benchmarks were exceeded except for "speed of drying" at visit 2, and "texture" at visit 2 and 3. Cumulative study time expenditure was 14 days for the observer and four days for participants. EVO9 was well tolerated and accepted according to the WHO single ABHR evaluation protocol with the potential for improvement for stickiness. The WHO protocol is feasible but requires considerable time and logistics. It does not preclude bias, in this case especially due to the necessary switch to personal dispensers.

29 CFR 552.104 - Babysitting services performed on a casual basis.

Code of Federal Regulations, 2011 CFR

2011-07-01

... accompany families for a vacation period to take care of the children if the duration of such employment...” devotes more than 20 percent of his or her time to household work during a babysitting assignment, the... percent tolerance is not exceeded. (d) Individuals who engage in babysitting as a full-time occupation are...

29 CFR 552.104 - Babysitting services performed on a casual basis.

Code of Federal Regulations, 2010 CFR

2010-07-01

... accompany families for a vacation period to take care of the children if the duration of such employment...” devotes more than 20 percent of his or her time to household work during a babysitting assignment, the... percent tolerance is not exceeded. (d) Individuals who engage in babysitting as a full-time occupation are...

Insect capa neuropeptides impact desiccation and cold tolerance

PubMed Central

Terhzaz, Selim; Teets, Nicholas M.; Cabrero, Pablo; Henderson, Louise; Ritchie, Michael G.; Nachman, Ronald J.; Dow, Julian A. T.; Denlinger, David L.; Davies, Shireen-A.

2015-01-01

The success of insects is linked to their impressive tolerance to environmental stress, but little is known about how such responses are mediated by the neuroendocrine system. Here we show that the capability (capa) neuropeptide gene is a desiccation- and cold stress-responsive gene in diverse dipteran species. Using targeted in vivo gene silencing, physiological manipulations, stress-tolerance assays, and rationally designed neuropeptide analogs, we demonstrate that the Drosophila melanogaster capa neuropeptide gene and its encoded peptides alter desiccation and cold tolerance. Knockdown of the capa gene increases desiccation tolerance but lengthens chill coma recovery time, and injection of capa peptide analogs can reverse both phenotypes. Immunohistochemical staining suggests that capa accumulates in the capa-expressing Va neurons during desiccation and nonlethal cold stress but is not released until recovery from each stress. Our results also suggest that regulation of cellular ion and water homeostasis mediated by capa peptide signaling in the insect Malpighian (renal) tubules is a key physiological mechanism during recovery from desiccation and cold stress. This work augments our understanding of how stress tolerance is mediated by neuroendocrine signaling and illustrates the use of rationally designed peptide analogs as agents for disrupting protective stress tolerance. PMID:25730885

Impact of CPAP on physical exercise tolerance and sympathetic-vagal balance in patients with chronic heart failure.

PubMed

Reis, Hugo V; Borghi-Silva, Audrey; Catai, Aparecida M; Reis, Michel S

2014-01-01

Chronic heart failure (CHF) leads to exercise intolerance. However, non-invasive ventilation is able to improve functional capacity of patients with CHF. The aim of this study was to evaluate the effectiveness of continuous positive airway pressure (CPAP) on physical exercise tolerance and heart rate variability (HRV) in patients with CHF. Method : Seven men with CHF (62 ± 8 years) and left ventricle ejection fraction of 41 ± 8% were submitted to an incremental symptom-limited exercise test (IT) on the cicloergometer. On separate days, patients were randomized to perform four constant work rate exercise tests to maximal tolerance with and without CPAP (5 cmH2O) in the following conditions: i) at 50% of peak work rate of IT; and ii) at 75% of peak work rate of IT. At rest and during these conditions, instantaneous heart rate (HR) was recorded using a cardiofrequencimeter and HRV was analyzed in time domain (SDNN and RMSSD indexes). For statistical procedures, Wilcoxon test or Kruskall-Wallis test with Dunn's post-hoc were used accordingly. In addition, categorical variables were analysed through Fischer's test (p<0.05). There were significant improvements in exercise tolerance at 75% of peak work rate of IT with CPAP (405 ± 52 vs. 438 ± 58 s). RMSSD indexes were lower during exercise tests compared to CPAP at rest and with 50% of peak work rate of IT. These data suggest that CPAP appears to be a useful strategy to improve functional capacity in patients with CHF. However, the positive impact of CPAP did not generate significant changes in the HRV during physical exercises.

Solar-Blind Photodetectors for Harsh Electronics

PubMed Central

Tsai, Dung-Sheng; Lien, Wei-Cheng; Lien, Der-Hsien; Chen, Kuan-Ming; Tsai, Meng-Lin; Senesky, Debbie G.; Yu, Yueh-Chung; Pisano, Albert P.; He, Jr-Hau

2013-01-01

We demonstrate solar-blind photodetectors (PDs) by employing AlN thin films on Si(100) substrates with excellent temperature tolerance and radiation hardness. Even at a bias higher than 200 V the AlN PDs on Si show a dark current as low as ~ 1 nA. The working temperature is up to 300°C and the radiation tolerance is up to 1013 cm−2 of 2-MeV proton fluences for AlN metal-semiconductor-metal (MSM) PDs. Moreover, the AlN PDs show a photoresponse time as fast as ~ 110 ms (the rise time) and ~ 80 ms (the fall time) at 5 V bias. The results demonstrate that AlN MSM PDs hold high potential in next-generation deep ultraviolet PDs for use in harsh environments. PMID:24022208

75 FR 37738 - 1-Naphthaleneacetic Acid; Time-Limited Tolerance, Technical Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-30

...-Naphthaleneacetic Acid; Time-Limited Tolerance, Technical Correction AGENCY: Environmental Protection Agency (EPA..., ethylene oxide, fenvalerate, et al.; tolerance actions. Today's rule restores the time-limited tolerance...-3) establishing a time-limited tolerance for residues of 1-naphthaleneacetic acid ethyl ester in or...

[Burden and health effects of shift work].

PubMed

Heitmann, Jörg

2010-10-01

In Germany aprox. 15% of all employees have irregular or flexible working hours. Disturbed sleep and/or hypersomnia are direct consequences of shift work and therefore described as shift work disorder. Beyond this, shift work can also be associated with specific pathological disorders. There are individual differences in tolerance to shift work. Optimization of both shift schedules and sleep to "non-physiological" times of the day are measures to counteract the negative effects of shift work. There is still not enough evidence to recommend drugs for routine use in shift workers. © Georg Thieme Verlag Stuttgart · New York.

Minimum expected delay-based routing protocol (MEDR) for Delay Tolerant Mobile Sensor Networks.

PubMed

Feng, Yong; Liu, Ming; Wang, Xiaomin; Gong, Haigang

2010-01-01

It is a challenging work to develop efficient routing protocols for Delay Tolerant Mobile Sensor Networks (DTMSNs), which have several unique characteristics such as sensor mobility, intermittent connectivity, energy limit, and delay tolerability. In this paper, we propose a new routing protocol called Minimum Expected Delay-based Routing (MEDR) tailored for DTMSNs. MEDR achieves a good routing performance by finding and using the connected paths formed dynamically by mobile sensors. In MEDR, each sensor maintains two important parameters: Minimum Expected Delay (MED) and its expiration time. According to MED, messages will be delivered to the sensor that has at least a connected path with their hosting nodes, and has the shortest expected delay to communication directly with the sink node. Because of the changing network topology, the path is fragile and volatile, so we use the expiration time of MED to indicate the valid time of the path, and avoid wrong transmissions. Simulation results show that the proposed MEDR achieves a higher message delivery ratio with lower transmission overhead and data delivery delay than other DTMSN routing approaches.

Validation Methods for Fault-Tolerant avionics and control systems, working group meeting 1

NASA Technical Reports Server (NTRS)

1979-01-01

The proceedings of the first working group meeting on validation methods for fault tolerant computer design are presented. The state of the art in fault tolerant computer validation was examined in order to provide a framework for future discussions concerning research issues for the validation of fault tolerant avionics and flight control systems. The development of positions concerning critical aspects of the validation process are given.

Effect of the first night shift period on sleep in young nurse students.

PubMed

Fietze, Ingo; Knoop, Karsten; Glos, Martin; Holzhausen, Martin; Peter, Jan Giso; Penzel, Thomas

2009-12-01

In young hospital nurses being exposed to a night shift work schedule for the first time in their occupational life, sleep quality is investigated quantitatively. A main sleep period and supplementary sleep periods were defined and analyzed to investigate sleep behavior and quality. A total of 30 young nurses (26 women, 4 men), mean age 20.2 +/- 2.1 years participated. A 3 week nursing school period was followed by a 3 week work period with a 3-5 night shift sub-period and recovery days. Sleep-wake behavior was assessed with an actigraph, sleep diaries, Epworth sleepiness scale (ESS), and quality of life was assessed with a standard questionnaire (SF-36). Comparing the school period with the work shift period when excluding recovery days after night shift period significant increase of total sleep time within 24 h was found during the work days (ANOVA P < 0.05). During the night shift sub-period, there was just a small decline of the main sleep period at day (n.s.) which was not compensated by supplementary sleep episodes. The supplementary sleep during work day varied between 11 min (school period) and 18 min after recovery days from night shift (n.s.). Young healthy nurses tolerate the first night shift exposure very well, according to objective and subjective parameters related to quality of sleep. An increased sleep need during work days lead to longer total sleep time, but do not lead to longer supplementary sleep episodes. Young nurses tolerate the first rotating shift period and the first night shift period very well.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, Amjad Majid; Albert, Don; Andersson, Par

SLURM is an open source, fault-tolerant, and highly scalable cluster management and job scheduling system for large and small computer clusters. As a cluster resource manager, SLURM has three key functions. First, it allocates exclusive and/or non-exclusive access to resources (compute nodes) to users for some duration of time so they can perform work. Second, it provides a framework for starting, executing, and monitoring work 9normally a parallel job) on the set of allocated nodes. Finally, it arbitrates conflicting requests for resources by managing a queue of pending work.

Assessing the Efficiency of Phenotyping Early Traits in a Greenhouse Automated Platform for Predicting Drought Tolerance of Soybean in the Field.

PubMed

Peirone, Laura S; Pereyra Irujo, Gustavo A; Bolton, Alejandro; Erreguerena, Ignacio; Aguirrezábal, Luis A N

2018-01-01

Conventional field phenotyping for drought tolerance, the most important factor limiting yield at a global scale, is labor-intensive and time-consuming. Automated greenhouse platforms can increase the precision and throughput of plant phenotyping and contribute to a faster release of drought tolerant varieties. The aim of this work was to establish a framework of analysis to identify early traits which could be efficiently measured in a greenhouse automated phenotyping platform, for predicting the drought tolerance of field grown soybean genotypes. A group of genotypes was evaluated, which showed variation in their drought susceptibility index (DSI) for final biomass and leaf area. A large number of traits were measured before and after the onset of a water deficit treatment, which were analyzed under several criteria: the significance of the regression with the DSI, phenotyping cost, earliness, and repeatability. The most efficient trait was found to be transpiration efficiency measured at 13 days after emergence. This trait was further tested in a second experiment with different water deficit intensities, and validated using a different set of genotypes against field data from a trial network in a third experiment. The framework applied in this work for assessing traits under different criteria could be helpful for selecting those most efficient for automated phenotyping.

Problems related to the integration of fault tolerant aircraft electronic systems

NASA Technical Reports Server (NTRS)

Bannister, J. A.; Adlakha, V.; Triyedi, K.; Alspaugh, T. A., Jr.

1982-01-01

Problems related to the design of the hardware for an integrated aircraft electronic system are considered. Taxonomies of concurrent systems are reviewed and a new taxonomy is proposed. An informal methodology intended to identify feasible regions of the taxonomic design space is described. Specific tools are recommended for use in the methodology. Based on the methodology, a preliminary strawman integrated fault tolerant aircraft electronic system is proposed. Next, problems related to the programming and control of inegrated aircraft electronic systems are discussed. Issues of system resource management, including the scheduling and allocation of real time periodic tasks in a multiprocessor environment, are treated in detail. The role of software design in integrated fault tolerant aircraft electronic systems is discussed. Conclusions and recommendations for further work are included.

A randomized comparative study of tolerance and satisfaction in the treatment of actinic keratosis of the face and scalp between 5% imiquimod cream and photodynamic therapy with methyl aminolaevulinate.

PubMed

Serra-Guillen, C; Nagore, E; Hueso, L; Llombart, B; Requena, C; Sanmartín, O; Botella-Estrada, R; Guillen, C

2011-02-01

Photodynamic therapy (PDT) and imiquimod are two excellent treatments for actinic keratosis but are often not well tolerated by patients. To ascertain which treatment is better tolerated and which produces greater patient satisfaction. A secondary objective was to determine the factors related to the patient's tolerance to each treatment. Patients with at least five actinic keratosis lesions on the face and scalp were selected. The patients were randomized to receive treatment with PDT with methyl aminolaevulinate or treatment with imiquimod. Tolerance, satisfaction and predisposition to repeat the treatment were evaluated. Most patients exhibited good or acceptable tolerance to both PDT and imiquimod treatment. There was a higher percentage of patients treated with PDT (93%) who were very satisfied compared with imiquimod (62%) (P=0·004). Most patients treated with either one of the two options would repeat the same treatment. No significant relationship was found between age, sex, working time exposed to the sun, phototype and hair colour and the tolerance to both treatments. Both PDT and imiquimod are treatments that are generally well tolerated. While both treatments provide a high level of satisfaction, PDT appears to be slightly superior in this regard. © 2011 The Authors. BJD © 2011 British Association of Dermatologists.

Relationship between tolerance/intolerance of ambiguity and perceived environmental uncertainty in hospitals.

PubMed

Callahan, P; Young-Cureton, G; Zalar, M; Wahl, S

1997-11-01

1 Many variables may contribute to a nurse's perceptions when working in a changing health care environment, especially in the field of psychiatry. 2 While this study did not find a relationship between tolerance for ambiguity and perceived environmental uncertainty in hospitals, age and educational background appear to be variable, which may warrant further study as ultimately impacting nursing. 3 Research which explores those personality variables which underlie perception would assist nurse administrators in designing interventions, opening new lines of communication, and increasing sensitivity to individual nurse's need in these changing times.

Metabolite profiling during cold acclimation of Lolium perenne genotypes distinct in the level of frost tolerance.

PubMed

Bocian, Aleksandra; Zwierzykowski, Zbigniew; Rapacz, Marcin; Koczyk, Grzegorz; Ciesiołka, Danuta; Kosmala, Arkadiusz

2015-11-01

Abiotic stresses, including low temperature, can significantly reduce plant yielding. The knowledge on the molecular basis of stress tolerance could help to improve its level in species of relatively high importance to agriculture. Unfortunately, the complex research performed so far mainly on model species and also, to some extent, on cereals does not fully cover the demands of other agricultural plants of temperate climate, including forage grasses. Two Lolium perenne (perennial ryegrass) genotypes with contrasting levels of frost tolerance, the high frost tolerant (HFT) and the low frost tolerant (LFT) genotypes, were selected for comparative metabolomic research. The work focused on the analysis of leaf metabolite accumulation before and after seven separate time points of cold acclimation. Gas chromatography-mass spectrometry (GC/MS) was used to identify amino acids (alanine, proline, glycine, glutamic and aspartic acid, serine, lysine and asparagine), carbohydrates (fructose, glucose, sucrose, raffinose and trehalose) and their derivatives (mannitol, sorbitol and inositol) accumulated in leaves in low temperature. The observed differences in the level of frost tolerance between the analysed genotypes could be partially due to the time point of cold acclimation at which the accumulation level of crucial metabolite started to increase. In the HFT genotype, earlier accumulation was observed for proline and asparagine. The increased amounts of alanine, glutamic and aspartic acids, and asparagine during cold acclimation could be involved in the regulation of photosynthesis intensity in L. perenne. Among the analysed carbohydrates, only raffinose revealed a significant association with the acclimation process in this species.

Fault tolerance in computational grids: perspectives, challenges, and issues.

PubMed

Haider, Sajjad; Nazir, Babar

2016-01-01

Computational grids are established with the intention of providing shared access to hardware and software based resources with special reference to increased computational capabilities. Fault tolerance is one of the most important issues faced by the computational grids. The main contribution of this survey is the creation of an extended classification of problems that incur in the computational grid environments. The proposed classification will help researchers, developers, and maintainers of grids to understand the types of issues to be anticipated. Moreover, different types of problems, such as omission, interaction, and timing related have been identified that need to be handled on various layers of the computational grid. In this survey, an analysis and examination is also performed pertaining to the fault tolerance and fault detection mechanisms. Our conclusion is that a dependable and reliable grid can only be established when more emphasis is on fault identification. Moreover, our survey reveals that adaptive and intelligent fault identification, and tolerance techniques can improve the dependability of grid working environments.

Comparative studies of various hyaluronic acids produced by microbial fermentation for potential topical ophthalmic applications.

PubMed

Guillaumie, Fanny; Furrer, Pascal; Felt-Baeyens, Olivia; Fuhlendorff, Birgit L; Nymand, Søren; Westh, Peter; Gurny, Robert; Schwach-Abdellaoui, Khadija

2010-03-15

This work presents a comparative study of various hyaluronic acids (HA) produced by fermentation of either Bacillus subtilis or Streptococcus towards the selection of an optimal molecular weight (MW) HA for the preparation of topical ophthalmic formulations. The influence of HA MW on water binding capacity, sterile filtration, rheological properties, precorneal residence time and ocular tolerance of ophthalmic solutions was investigated. Molecular weight did not affect hydration of hyaluronic acid according to differential scanning calorimetry (DSC). In general, medium MW HA (0.6-1 MDa) resulted in solutions that were superior in terms of sterile filtration and kinematic viscosity requirements compared to high MW HA (>1 MDa). Moreover, all HA-based solutions exhibited well-defined viscoelastic properties that depend on MW. Gamma scintigraphic data indicated that HA MW at 0.1% concentration (w/v) and HA origin did not significantly affect the corneal residence time on rabbit eyes. A 0.3% solution of high MW HA had a prolonged residence time in the precorneal area compared to a medium MW HA at the same concentration. Finally, an in vivo ocular irritation test based on confocal laser scanning ophthalmoscopy (CLSO) conclusively showed the excellent tolerance of both Bacillus-derived HA and Streptococcus-derived HA after topical instillation onto the corneal surface. Overall, this comprehensive work highlights the superiority of medium MW hyaluronic acid for topical ophthalmic formulations based on their physico-chemical and biological properties, tolerance and handling. Such solutions are expected to enhance tear film stability, to allow for maximum comfort, and to exhibit high residence times, while being biocompatible and easy to sterile filter. (c) 2009 Wiley Periodicals, Inc.

Setup in a clinical workflow and impact on radiotherapy routine of an in vivo dosimetry procedure with an electronic portal imaging device

PubMed Central

Piermattei, Angelo; Kang, Shengwei; Xiao, Mingyong; Tang, Bin; Liao, Xiongfei; Xin, Xin; Grusio, Mattia

2018-01-01

High conformal techniques such as intensity-modulated radiation therapy and volumetric-modulated arc therapy are widely used in overloaded radiotherapy departments. In vivo dosimetric screening is essential in this environment to avoid important dosimetric errors. This work examines the feasibility of introducing in vivo dosimetry (IVD) checks in a radiotherapy routine. The causes of dosimetric disagreements between delivered and planned treatments were identified and corrected during the course of treatment. The efficiency of the corrections performed and the added workload needed for the entire procedure were evaluated. The IVD procedure was based on an electronic portal imaging device. A total of 3682 IVD tests were performed for 147 patients who underwent head and neck, abdomen, pelvis, breast, and thorax radiotherapy treatments. Two types of indices were evaluated and used to determine if the IVD tests were within tolerance levels: the ratio R between the reconstructed and planned isocentre doses and a transit dosimetry based on the γ-analysis of the electronic portal images. The causes of test outside tolerance level were investigated and corrected and IVD test was repeated during subsequent fraction. The time needed for each step of the IVD procedure was registered. Pelvis, abdomen, and head and neck treatments had 10% of tests out of tolerance whereas breast and thorax treatments accounted for up to 25%. The patient setup was the main cause of 90% of the IVD tests out of tolerance and the remaining 10% was due to patient morphological changes. An average time of 42 min per day was sufficient to monitor a daily workload of 60 patients in treatment. This work shows that IVD performed with an electronic portal imaging device is feasible in an overloaded department and enables the timely realignment of the treatment quality indices in order to achieve a patient’s final treatment compliant with the one prescribed. PMID:29432473

Inflammation reduces physiological tissue tolerance in the development of work-related musculoskeletal disorders.

PubMed

Barr, Ann E; Barbe, Mary F

2004-02-01

Work-related musculoskeletal disorders (MSDs) cause substantial worker discomfort, disability and loss of productivity. Due to the difficulty in analyzing the tissues of patients in the early stages of work-related MSD, there is controversy concerning the pathomechanisms of the development of these disorders. The pathophysiology of work-related MSD can be studied more easily in animal models. The purpose of this review is to relate theories of the development of tissue injury due to repeated motion to findings of recent investigations in animals that address the role of the inflammatory response in propagating tissue injury and contributing to chronic or recurring tissue injury. These tissue effects are related to behavioral indicators of discomfort and movement dysfunction with the aim of clarifying key time points for specific intervention approaches. The results from animal models of MSD are discussed in the light of findings in patients, whose tissues are examined at a much later phase of MSD development. Finally, a conceptual model of the potentially negative impact of inflammation on tissue tolerance is proposed along with suggestions for future research directions.

29 CFR 5.15 - Limitations, variations, tolerances, and exemptions under the Contract Work Hours and Safety...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the Contract Work Hours and Safety Standards Act. 5.15 Section 5.15 Labor Office of the Secretary of... WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.15 Limitations, variations, tolerances, and exemptions under the Contract Work Hours and Safety Standards Act. (a...

Dynamic Response of an Optomechanical System to a Stationary Random Excitation in the Time Domain

DOE PAGES

Palmer, Jeremy A.; Paez, Thomas L.

2011-01-01

Modern electro-optical instruments are typically designed with assemblies of optomechanical members that support optics such that alignment is maintained in service environments that include random vibration loads. This paper presents a nonlinear numerical analysis that calculates statistics for the peak lateral response of optics in an optomechanical sub-assembly subject to random excitation of the housing. The work is unique in that the prior art does not address peak response probability distribution for stationary random vibration in the time domain for a common lens-retainer-housing system with Coulomb damping. Analytical results are validated by using displacement response data from random vibration testingmore » of representative prototype sub-assemblies. A comparison of predictions to experimental results yields reasonable agreement. The Type I Asymptotic form provides the cumulative distribution function for peak response probabilities. Probabilities are calculated for actual lens centration tolerances. The probability that peak response will not exceed the centration tolerance is greater than 80% for prototype configurations where the tolerance is high (on the order of 30 micrometers). Conversely, the probability is low for those where the tolerance is less than 20 micrometers. The analysis suggests a design paradigm based on the influence of lateral stiffness on the magnitude of the response.« less

Simple Linux Utility for Resource Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jette, M.

2009-09-09

SLURM is an open source, fault-tolerant, and highly scalable cluster management and job scheduling system for large and small computer clusters. As a cluster resource manager, SLURM has three key functions. First, it allocates exclusive and/or non exclusive access to resources (compute nodes) to users for some duration of time so they can perform work. Second, it provides a framework for starting, executing, and monitoring work (normally a parallel job) on the set of allciated nodes. Finally, it arbitrates conflicting requests for resouces by managing a queue of pending work.

Generating a fault-tolerant global clock using high-speed control signals for the MetaNet architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ofek, Y.

1994-05-01

This work describes a new technique, based on exchanging control signals between neighboring nodes, for constructing a stable and fault-tolerant global clock in a distributed system with an arbitrary topology. It is shown that it is possible to construct a global clock reference with time step that is much smaller than the propagation delay over the network's links. The synchronization algorithm ensures that the global clock tick' has a stable periodicity, and therefore, it is possible to tolerate failures of links and clocks that operate faster and/or slower than nominally specified, as well as hard failures. The approach taken inmore » this work is to generate a global clock from the ensemble of the local transmission clocks and not to directly synchronize these high-speed clocks. The steady-state algorithm, which generates the global clock, is executed in hardware by the network interface of each node. At the network interface, it is possible to measure accurately the propagation delay between neighboring nodes with a small error or uncertainty and thereby to achieve global synchronization that is proportional to these error measurements. It is shown that the local clock drift (or rate uncertainty) has only a secondary effect on the maximum global clock rate. The synchronization algorithm can tolerate any physical failure. 18 refs.« less

Assessing the Efficiency of Phenotyping Early Traits in a Greenhouse Automated Platform for Predicting Drought Tolerance of Soybean in the Field

PubMed Central

Peirone, Laura S.; Pereyra Irujo, Gustavo A.; Bolton, Alejandro; Erreguerena, Ignacio; Aguirrezábal, Luis A. N.

2018-01-01

Conventional field phenotyping for drought tolerance, the most important factor limiting yield at a global scale, is labor-intensive and time-consuming. Automated greenhouse platforms can increase the precision and throughput of plant phenotyping and contribute to a faster release of drought tolerant varieties. The aim of this work was to establish a framework of analysis to identify early traits which could be efficiently measured in a greenhouse automated phenotyping platform, for predicting the drought tolerance of field grown soybean genotypes. A group of genotypes was evaluated, which showed variation in their drought susceptibility index (DSI) for final biomass and leaf area. A large number of traits were measured before and after the onset of a water deficit treatment, which were analyzed under several criteria: the significance of the regression with the DSI, phenotyping cost, earliness, and repeatability. The most efficient trait was found to be transpiration efficiency measured at 13 days after emergence. This trait was further tested in a second experiment with different water deficit intensities, and validated using a different set of genotypes against field data from a trial network in a third experiment. The framework applied in this work for assessing traits under different criteria could be helpful for selecting those most efficient for automated phenotyping. PMID:29774042

Survivable algorithms and redundancy management in NASA's distributed computing systems

NASA Technical Reports Server (NTRS)

Malek, Miroslaw

1992-01-01

The design of survivable algorithms requires a solid foundation for executing them. While hardware techniques for fault-tolerant computing are relatively well understood, fault-tolerant operating systems, as well as fault-tolerant applications (survivable algorithms), are, by contrast, little understood, and much more work in this field is required. We outline some of our work that contributes to the foundation of ultrareliable operating systems and fault-tolerant algorithm design. We introduce our consensus-based framework for fault-tolerant system design. This is followed by a description of a hierarchical partitioning method for efficient consensus. A scheduler for redundancy management is introduced, and application-specific fault tolerance is described. We give an overview of our hybrid algorithm technique, which is an alternative to the formal approach given.

The interplay among stress, frustration tolerance, mindfulness, and social support in Internet gaming disorder symptoms among Chinese working adults.

PubMed

Yu, Shu; Mao, Sijie; Wu, Anise M S

2018-05-24

Internet gaming disorder (IGD) is a growing mental health threat across age groups, but existing literature regarding IGD mainly focuses on student populations. Empirical investigation of the risk and protective factors in adult populations is warranted. This study aimed to fill the research gap by examining whether stress and 3 positive psychology factors (ie, frustration tolerance, mindfulness, and social support) are associated with IGD symptoms in working adults. It was also the first attempt to test the buffering effects of these positive psychology factors on the relationship between stress and IGD vulnerability. This cross-sectional study was conducted in Shenzhen, China. We recruited 327 full-time working Chinese adults (mean age = 31.93 years), who had online gaming experience and voluntarily completed an anonymous questionnaire with DSM-5 criteria to measure their IGD symptoms. Internet gaming disorder symptoms were positively correlated with stress and negatively correlated with the 3 positive psychology factors, among which mindfulness emerged as the most salient protective factor. Moreover, mindfulness, but not frustration tolerance and social support, was found to significantly alleviate the relationship between stress and IGD. Our findings provide supportive evidence for the protective and moderating roles of positive psychology variables against IGD among Chinese working adults. Workplace-based prevention programs may take the identified factors into account to help promote individuals' personal resources to mitigate development of IGD. © 2018 John Wiley & Sons Australia, Ltd.

An improved ant colony optimization algorithm with fault tolerance for job scheduling in grid computing systems

PubMed Central

Idris, Hajara; Junaidu, Sahalu B.; Adewumi, Aderemi O.

2017-01-01

The Grid scheduler, schedules user jobs on the best available resource in terms of resource characteristics by optimizing job execution time. Resource failure in Grid is no longer an exception but a regular occurring event as resources are increasingly being used by the scientific community to solve computationally intensive problems which typically run for days or even months. It is therefore absolutely essential that these long-running applications are able to tolerate failures and avoid re-computations from scratch after resource failure has occurred, to satisfy the user’s Quality of Service (QoS) requirement. Job Scheduling with Fault Tolerance in Grid Computing using Ant Colony Optimization is proposed to ensure that jobs are executed successfully even when resource failure has occurred. The technique employed in this paper, is the use of resource failure rate, as well as checkpoint-based roll back recovery strategy. Check-pointing aims at reducing the amount of work that is lost upon failure of the system by immediately saving the state of the system. A comparison of the proposed approach with an existing Ant Colony Optimization (ACO) algorithm is discussed. The experimental results of the implemented Fault Tolerance scheduling algorithm show that there is an improvement in the user’s QoS requirement over the existing ACO algorithm, which has no fault tolerance integrated in it. The performance evaluation of the two algorithms was measured in terms of the three main scheduling performance metrics: makespan, throughput and average turnaround time. PMID:28545075

Critical factors and paths influencing construction workers' safety risk tolerances.

PubMed

Wang, Jiayuan; Zou, Patrick X W; Li, Penny P

2016-08-01

While workers' safety risk tolerances have been regarded as a main reason for their unsafe behaviors, little is known about why different people have different risk tolerances even when confronting the same situation. The aim of this research is to identify the critical factors and paths that influence workers' safety risk tolerance and to explore how they contribute to accident causal model from a system thinking perceptive. A number of methods were carried out to analyze the data collected through interviews and questionnaire surveys. In the first and second steps of the research, factor identification, factor ranking and factor analysis were carried out, and the results show that workers' safety risk tolerance can be influenced by four groups of factors, namely: (1) personal subjective perception; (2) work knowledge and experiences; (3) work characteristics; and (4) safety management. In the third step of the research, hypothetical influencing path model was developed and tested by using structural equation modeling (SEM). It is found that the effects of external factors (safety management and work characteristics) on risk tolerance are larger than that of internal factors (personal subjective perception and work knowledge & experiences). Specifically, safety management contributes the most to workers' safety risk tolerance through its direct effect and indirect effect; while personal subjective perception comes the second and can act as an intermedia for work characteristics. This research provides an in-depth insight of workers' unsafe behaviors by depicting the contributing factors as shown in the accident causal model developed in this research. Copyright © 2015 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sadayappan, Ponnuswamy

Exascale computing systems will provide a thousand-fold increase in parallelism and a proportional increase in failure rate relative to today's machines. Systems software for exascale machines must provide the infrastructure to support existing applications while simultaneously enabling efficient execution of new programming models that naturally express dynamic, adaptive, irregular computation; coupled simulations; and massive data analysis in a highly unreliable hardware environment with billions of threads of execution. We propose a new approach to the data and work distribution model provided by system software based on the unifying formalism of an abstract file system. The proposed hierarchical data model providesmore » simple, familiar visibility and access to data structures through the file system hierarchy, while providing fault tolerance through selective redundancy. The hierarchical task model features work queues whose form and organization are represented as file system objects. Data and work are both first class entities. By exposing the relationships between data and work to the runtime system, information is available to optimize execution time and provide fault tolerance. The data distribution scheme provides replication (where desirable and possible) for fault tolerance and efficiency, and it is hierarchical to make it possible to take advantage of locality. The user, tools, and applications, including legacy applications, can interface with the data, work queues, and one another through the abstract file model. This runtime environment will provide multiple interfaces to support traditional Message Passing Interface applications, languages developed under DARPA's High Productivity Computing Systems program, as well as other, experimental programming models. We will validate our runtime system with pilot codes on existing platforms and will use simulation to validate for exascale-class platforms. In this final report, we summarize research results from the work done at the Ohio State University towards the larger goals of the project listed above.« less

Mind-Body Skills Training to Improve Distress Tolerance in Medical Students: A Pilot Study.

PubMed

Kraemer, Kristen M; Luberto, Christina M; O'Bryan, Emily M; Mysinger, Erica; Cotton, Sian

2016-01-01

Medical students face rigorous and stressful work environments, resulting in high rates of psychological distress. However, there has been a dearth of empirical work aimed at modifying risk factors for psychopathology among this at-risk group. Distress tolerance, defined as the ability to withstand emotional distress, is one factor that may be important in promoting psychological well-being in medical students. Thus, the aim of the current mixed-methods study was (a) to describe changes in facets of distress tolerance (i.e., emotional tolerance, absorption, appraisal, regulation) for medical students who completed a mind-body skills training group, and a no-intervention control group of students; (b) to examine the relationship between changes in psychological variables and changes in distress tolerance; and (c) to report students' perceptions of the mind-body group, with an emphasis on how the group may have affected personal and professional functioning due to improvements in distress tolerance. The mind-body program was an 11-week, 2-hour skills training group that focused on introducing, practicing, and processing mind-body skills such as biofeedback, guided imagery, relaxation, several forms of meditation (e.g., mindfulness), breathing exercises, and autogenic training. Participants were 52 first- and second-year medical students (62.7% female, Mage = 23.45, SD = 1.51) who participated in a mind-body group or a no-intervention control group and completed self-report measures before and after the 11-week period. Students in the mind-body group showed a modest improvement in all distress tolerance subscales over time (ΔM = .42-.53, p = .01-.03, d = .44-.53), whereas the control group showed less consistent changes across most subscales (ΔM = .11-.42, p = .10-.65, d = .01-.42). Students in the mind-body group qualitatively reported an improved ability to tolerate affective distress. Overall, improvements in psychological symptoms were associated with improvements in distress tolerance in the mind-body group but not in the control group. These preliminary findings provide support for the notion that improving distress tolerance through mind-body skills training might serve to protect medical students from becoming functionally impaired by psychological distress. Thus, implementing mind-body skills training into medical school education may help to improve the psychological well-being of medical students. Future studies utilizing more methodologically rigorous designs are warranted.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riesen, Rolf E.; Bridges, Patrick G.; Stearley, Jon R.

Next-generation exascale systems, those capable of performing a quintillion (10{sup 18}) operations per second, are expected to be delivered in the next 8-10 years. These systems, which will be 1,000 times faster than current systems, will be of unprecedented scale. As these systems continue to grow in size, faults will become increasingly common, even over the course of small calculations. Therefore, issues such as fault tolerance and reliability will limit application scalability. Current techniques to ensure progress across faults like checkpoint/restart, the dominant fault tolerance mechanism for the last 25 years, are increasingly problematic at the scales of future systemsmore » due to their excessive overheads. In this work, we evaluate a number of techniques to decrease the overhead of checkpoint/restart and keep this method viable for future exascale systems. More specifically, this work evaluates state-machine replication to dramatically increase the checkpoint interval (the time between successive checkpoint) and hash-based, probabilistic incremental checkpointing using graphics processing units to decrease the checkpoint commit time (the time to save one checkpoint). Using a combination of empirical analysis, modeling, and simulation, we study the costs and benefits of these approaches on a wide range of parameters. These results, which cover of number of high-performance computing capability workloads, different failure distributions, hardware mean time to failures, and I/O bandwidths, show the potential benefits of these techniques for meeting the reliability demands of future exascale platforms.« less

Fault tolerant architectures for integrated aircraft electronics systems

NASA Technical Reports Server (NTRS)

Levitt, K. N.; Melliar-Smith, P. M.; Schwartz, R. L.

1983-01-01

Work into possible architectures for future flight control computer systems is described. Ada for Fault-Tolerant Systems, the NETS Network Error-Tolerant System architecture, and voting in asynchronous systems are covered.

Return to work: a case of PTSD, dissociative identity disorder, and satanic ritual abuse.

PubMed

Precin, Patricia

2011-01-01

This case study investigated an intervention that enabled an individual with Posttraumatic Stress Disorder (PTSD), Dissociative Identity Disorder (DID), and satanic ritual abuse to return to work after discharge from psychiatric inpatient treatment. The Occupational Questionnaire [88] revealed past difficulties in organization, awareness of time, communication, cooperation, frustration tolerance, competition, stress management, goal setting, and amnesia resulting in incomplete tasks and sporadic attendance at work. The Role Checklist [72] identified alters valuing work and employed in the past. The Modified Interest Checklist [70] identified running as an interest that 24 alters shared. Based on the initial evaluations, three times a week treadmill running was used as an intervention that built work skills (as measured by the Clerical Work Sample of the Valpar Component Work Sample Series [97]) necessary to sustain gainful employment upon discharge. After intervention, this individual improved in awareness of time, stress management, and goal setting abilities and was less amnestic as per the Occupational Questionnaire [88] and four additional alters expressed an interest in work according to the Modified Interest Checklist [70].

Aging and heat tolerance at rest or during work.

PubMed

Pandolf, K B

1991-01-01

Collectively, the literature on heat tolerance suggests that middle-aged (45-64 year old) men and women are more work-heat intolerant, and suffer more physiological strain during heat acclimation, than do younger individuals. However, it is unclear whether the age differences in work-heat intolerance and physiological strain during heat acclimation are related to age per se or associated with other factors such as certain disease states, decreased physical activity, and/or lowered aerobic fitness. In contrast, the work-heat tolerance and physiological responses during heat acclimation of habitually active or aerobically trained middle-aged men are the same or better than younger individuals. The reviewed studies emphasize the importance of aerobic fitness and pertinent morphological factors, such as body fat, body weight, and surface area in maintaining work-heat tolerance with aging. Recent studies suggest that middle-aged and older men and women may be more susceptible to greater heat strain at physiologically significant levels of dehydration than those younger. However, additional research appears necessary to support this hypothesis. When the effects of chronic debilitating diseases in the elderly (greater than 64 years old) are minimized, their heat tolerance and thermoregulatory responses are comparable to those younger. In fact, healthy and well-acclimated elderly men and women appear to perform as well as those younger during desert walks in dry heat. This review shall discuss experimental observations from previously published studies concerning aging and heat tolerance or the physiological heat strain during heat acclimation at rest or during work; and, will suggest future research efforts needed to advance the area.

Postprandial metabolic profiles following meals and snacks eaten during simulated night and day shift work.

PubMed

Al-Naimi, S; Hampton, S M; Richard, P; Tzung, C; Morgan, L M

2004-01-01

Shift workers are known to have an increased risk of developing cardiovascular disease (CVD) compared with day workers. An important factor contributing to this increased risk could be the increased incidence of postprandial metabolic risk factors for CVD among shift workers, as a consequence of the maladaptation of endogenous circadian rhythms to abrupt changes in shift times. We have previously shown that both simulated and real shift workers showed relatively impaired glucose and lipid tolerance if a single test meal was consumed between 00:00-02:00 h (night shift) compared with 12:00-14:00 h (day shift). The objective of the present study was to extend these observations to compare the cumulative metabolic effect of consecutive snacks/meals, as might normally be consumed throughout a period of night or day shift work. In a randomized crossover study, eight healthy nonobese men (20-33 yrs, BMI 20-25kg/m2) consumed a combination of two meals and a snack on two occasions following a standardized prestudy meal, simulating night and day shift working (total energy 2500 kcal: 40% fat, 50% carbohydrate, 10% protein). Meals were consumed at 01:00/ 13:00 h and 07:00/19:00h, and the snack at 04:00/16:00 h. Blood was taken after an overnight fast, and for 8 h following the first meal on each occasion, for the measurement of glucose, insulin, triacylglycerol (TAG), and nonesterified fatty acids (NEFA). RM-ANOVA (factors time and shift) showed a significant effect of shift for plasma TAG, with higher levels on simulated night compared to day shift (p < 0.05). There was a trend toward an effect of shift for plasma glucose, with higher plasma glucose at night (p = 0.08), and there was a time-shift interaction for plasma insulin levels (p < 0.01). NEFA levels were unaffected by shift. Inspection of the area under the plasma response curve (AUC) following each meal and snack revealed that the differences in lipid tolerance occurred throughout the study, with greatest differences occurring following the mid-shift snack. In contrast, glucose tolerance was relatively impaired following the first night-time meal, with no differences observed following the second meal. Plasma insulin levels were significantly lower following the first meal (p < 0.05), but significantly higher following the second meal (p < 0.01) on the simulated night shift. These findings confirm our previous observations of raised postprandial TAG and glucose at night, and show that sequential meal ingestion has a more pronounced effect on subsequent lipid than carbohydrate tolerance.

Future Development of Dense Ferroelectric Memories for Space Applications

NASA Technical Reports Server (NTRS)

Philpy, Stephen C.; Derbenwick, Gary F.

2001-01-01

The availability of high density, radiation tolerant, nonvolatile memories is critical for space applications. Ferroelectric memories, when fabricated with radiation hardened complementary metal oxide semiconductors (CMOS), can be manufactured and packaged to provide high density replacements for Flash memory, which is not radiation tolerant. Previous work showed ferroelectric memory cells to be resistant to single event upsets and proton irradiation, and ferroelectric storage capacitors to be resistant to neutron exposure. In addition to radiation hardness, the fast programming times, virtually unlimited endurance, and low voltage, low power operation make ferroelectric memories ideal for space missions. Previously, a commercial double level metal 64-kilobit ferroelectric memory was presented. Although the capabilities of radiation hardened wafer fabrication facilities lag behind those of the most modern commercial wafer fabrication facilities, several paths to achieving radiation tolerant, dense ferroelectric memories are emerging. Both short and long term solutions are presented in this paper. Although worldwide major semiconductor companies are introducing commercial ferroelectric memories, funding limitations must be overcome to proceed with the development of high density, radiation tolerant ferroelectric memories.

76 FR 57657 - Tetrachlorvinphos; Extension of Time-Limited Interim Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

...] Tetrachlorvinphos; Extension of Time-Limited Interim Pesticide Tolerances AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: This regulation establishes an extension of time-limited interim..., and Cosmetic Act (FFDCA). The time-limited tolerances expire on March 18, 2013. DATES: This regulation...

Can we well assess the relative efficacy and tolerability of a new drug versus others at the time of marketing authorization using mixed treatment comparisons? A detailed illustration with escitalopram.

PubMed

Llorca, Pierre-Michel; Lançon, Christophe; Brignone, Mélanie; Painchault, Caroline; Rive, Benoit; Toumi, Mondher; François, Clément

2015-01-01

To assess the variation of relative efficacy and tolerability of an antidepressant versus others based on both pre-marketing (registration studies) and post-marketing studies versus pre-marketing studies only in patients with major depressive disorder. The relative efficacy and tolerability of antidepressants was assessed by mixed treatment comparisons (MTCs) using data acquired over two time periods: before registration of the reference drug escitalopram (1989-2002) and up to 5 years later (1989-2007). Ranking probability outputs were presented for efficacy, using change from baseline to 8 weeks on Montgomery-Åsberg Depression Rating Scale total score, and tolerability, using withdrawals due to adverse events. The relative efficacy and tolerability of some selected antidepressants, including escitalopram, varied considerably over the two time periods. The improved relative efficacy and tolerability of escitalopram over time, compared with citalopram, was demonstrated by greater separation of ranking probability curves for efficacy and tolerability. In 2002, escitalopram ranked low with 13.9% and 5.1% probability of being in the top four antidepressants' relative efficacy and tolerability, respectively. In 2007, ranking probabilities for relative efficacy and tolerability of escitalopram increased to 52.5% and 82.1%, respectively. Time of marketing authorization may not be the most appropriate time to evaluate the relative efficacy and tolerability of a new antidepressant based on MTC approach due to the asymmetry of information between new and older compounds. However, the first evaluation of relative effect of a new drug for health technology assessment recommendations is commonly done at this time. Re-evaluation of a drug several years after its launch is likely to provide a more accurate indication of its relative efficacy and tolerability.

Heavy metal capture by autochthonous yeasts from a volcanic influenced environment of Patagonia.

PubMed

Russo, Gabriel; Libkind, Diego; Giraudo, María Rosa; Delgado, Osvaldo Daniel

2016-11-01

Heavy metals at elevated concentrations are a major threat to agricultural and human health. Typically, human activities tend to release these metals to the environment in aqueous solutions, generating high levels of pollution due to the mobility of the heavy metals. The aim of the present work was to assess heavy metal tolerance in yeasts isolated from Río Agrio - Lake Caviahue volcanic acidic aquatic environment and to evaluate the capacity of selected strains to capture metals in acidic culture media conditions. The ability of three yeast species, Cryptococcus agrionensis, Cryptococcus sp. 2, and Coniochaeta fodinicola, to tolerate and capture metals in live cultures has been evaluated. These three yeast species showed high tolerance to low pH and elevated concentrations of metals, thus implying their autochthonous status. Minimal inhibitory concentration (MIC) for growth obtained for these isolates showed elevated tolerance to the six heavy metals evaluated and were significantly higher than those registered for other microorganisms. C. agrionensis was able to capture 15.80 mg (g biomass) -1 of Cu 2+ (MIC: 0.22 g L -1 ), Cryptococcus sp. 2 was able to capture 36.25 and 65.28 mg (g biomass) -1 of Ni 2+ and Zn 2+ , respectively (MIC: 0.56 and 1.68, respectively), and C. fodinicola was able to capture 67.11 mg (g biomass) -1 of Zn 2+ (MIC: 3.75). This work reported the ability of yeasts to capture metals in acidic conditions for the first time. We hope that it represents the step-stone for future researches in the ability and metabolism of yeasts form acidic aquatic environment related to metal tolerance and capture. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Assessment of flat rolling theories for the use in a model-based controller for high-precision rolling applications

NASA Astrophysics Data System (ADS)

Stockert, Sven; Wehr, Matthias; Lohmar, Johannes; Abel, Dirk; Hirt, Gerhard

2017-10-01

In the electrical and medical industries the trend towards further miniaturization of devices is accompanied by the demand for smaller manufacturing tolerances. Such industries use a plentitude of small and narrow cold rolled metal strips with high thickness accuracy. Conventional rolling mills can hardly achieve further improvement of these tolerances. However, a model-based controller in combination with an additional piezoelectric actuator for high dynamic roll adjustment is expected to enable the production of the required metal strips with a thickness tolerance of +/-1 µm. The model-based controller has to be based on a rolling theory which can describe the rolling process very accurately. Additionally, the required computing time has to be low in order to predict the rolling process in real-time. In this work, four rolling theories from literature with different levels of complexity are tested for their suitability for the predictive controller. Rolling theories of von Kármán, Siebel, Bland & Ford and Alexander are implemented in Matlab and afterwards transferred to the real-time computer used for the controller. The prediction accuracy of these theories is validated using rolling trials with different thickness reduction and a comparison to the calculated results. Furthermore, the required computing time on the real-time computer is measured. Adequate results according the prediction accuracy can be achieved with the rolling theories developed by Bland & Ford and Alexander. A comparison of the computing time of those two theories reveals that Alexander's theory exceeds the sample rate of 1 kHz of the real-time computer.

78 FR 14487 - Tetrachlorvinphos; Proposed Extension of Time-Limited Interim Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

...] Tetrachlorvinphos; Proposed Extension of Time-Limited Interim Pesticide Tolerances AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: This regulation proposes the extension of the time-limited... related to EPA's extension of the time-limited interim tolerances for the combined residues of the...

78 FR 15880 - Tetrachlorvinphos; Extension of Time-Limited Interim Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-13

... Tetrachlorvinphos; Extension of Time-Limited Interim Pesticide Tolerances AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: This regulation extends the time-limited interim tolerances for the... . II. Background A detailed summary of the background related to EPA's extension of the time-limited...

Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites

NASA Astrophysics Data System (ADS)

Potluri, P.; Hogg, P.; Arshad, M.; Jetavat, D.; Jamshidi, P.

2012-10-01

3D woven composites, due to the presence of through-thickness fibre-bridging, have the potential to improve damage tolerance and at the same time to reduce the manufacturing costs. However, ability to withstand damage depends on weave topology as well as geometry of individual tows. There is an extensive literature on damage tolerance of 2D prepreg laminates but limited work is reported on the damage tolerance of 3D weaves. In view of the recent interest in 3D woven composites from aerospace as well as non-aerospace sectors, this paper aims to provide an understanding of the impact damage resistance as well as damage tolerance of 3D woven composites. Four different 3D woven architectures, orthogonal, angle interlocked, layer-to-layer and modified layer-to-layer structures, have been produced under identical weaving conditions. Two additional structures, Unidirectional (UD) cross-ply and 2D plain weave, have been developed for comparison with 3D weaves. All the four 3D woven laminates have similar order of magnitude of damage area and damage width, but significantly lower than UD and 2D woven laminates. Damage Resistance, calculated as impact energy per unit damage area, has been shown to be significantly higher for 3D woven laminates. Rate of change of CAI strength with impact energy appears to be similar for all four 3D woven laminates as well as UD laminate; 2D woven laminate has higher rate of degradation with respect to impact energy. Undamaged compression strength has been shown to be a function of average tow waviness angle. Additionally, 3D weaves exhibit a critical damage size; below this size there is no appreciable reduction in compression strength. 3D woven laminates have also exhibited a degree of plasticity during compression whereas UD laminates fail instantly. The experimental work reported in this paper forms a foundation for systematic development of computational models for 3D woven architectures for damage tolerance.

Visual working memory is more tolerant than visual long-term memory.

PubMed

Schurgin, Mark W; Flombaum, Jonathan I

2018-05-07

Human visual memory is tolerant, meaning that it supports object recognition despite variability across encounters at the image level. Tolerant object recognition remains one capacity in which artificial intelligence trails humans. Typically, tolerance is described as a property of human visual long-term memory (VLTM). In contrast, visual working memory (VWM) is not usually ascribed a role in tolerant recognition, with tests of that system usually demanding discriminatory power-identifying changes, not sameness. There are good reasons to expect that VLTM is more tolerant; functionally, recognition over the long-term must accommodate the fact that objects will not be viewed under identical conditions; and practically, the passive and massive nature of VLTM may impose relatively permissive criteria for thinking that two inputs are the same. But empirically, tolerance has never been compared across working and long-term visual memory. We therefore developed a novel paradigm for equating encoding and test across different memory types. In each experiment trial, participants saw two objects, memory for one tested immediately (VWM) and later for the other (VLTM). VWM performance was better than VLTM and remained robust despite the introduction of image and object variability. In contrast, VLTM performance suffered linearly as more variability was introduced into test stimuli. Additional experiments excluded interference effects as causes for the observed differences. These results suggest the possibility of a previously unidentified role for VWM in the acquisition of tolerant representations for object recognition. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Student-on-Student Harassment and Zero Tolerance: Achieving a Delicate Balance

ERIC Educational Resources Information Center

Essex, Nathan L.

2009-01-01

Zero tolerance policy. Most school districts have a zero tolerance policy in place for drug use, weapons on campus, sexual harassment, or all of the above. At their very core, zero tolerance policies make schools safer. However, a one-size-fits-all approach does not work well in all situations involving student misconduct. This article outlines…

Timing and Frequency of Sublethal Exposure Modifies the Induction and Retention of Increased Insecticide Tolerance in Wood Frogs (Lithobates sylvaticus).

PubMed

Jones, Devin K; Yates, Erika K; Mattes, Brian M; Hintz, William D; Schuler, Matthew S; Relyea, Rick A

2018-05-22

While the paradigm for increased tolerance to pesticides has been by selection on constitutive (naïve) traits, recent research has shown it can also occur through phenotypic plasticity. However, the time period in which induction can occur, the duration of induced tolerance, and the influence of multiple induction events remain unknown. We hypothesized that the induction of increased pesticide tolerance is limited to early sensitive periods, the magnitude of induced tolerance depends on the number of exposures, and the retention of induced tolerance depends on the time elapsed after an exposure and the number of exposures. To test these hypotheses, we exposed wood frog tadpoles to either a no-carbaryl control (water) or 0.5 mg/L carbaryl at four time periods, and later tested their tolerance to carbaryl using time-to-death assays. We discovered that tadpoles induced increased tolerance early and midway, but not late, in our experiment and their constitutive tolerance increased with age. We found no difference in the magnitude of induced tolerance following one or two exposures. Lastly, induced pesticide tolerance was reversed within 6 d, but was retained only when tadpoles experienced all four consecutive exposures. Phenotypic plasticity provides an immediate response for sensitive amphibian larvae to early pesticide exposures and reduces phenotypic mismatches in aquatic environments contaminated by agrochemicals. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Unpredictability of fighter pilots' g duration tolerance by anthropometric and physiological characteristics.

PubMed

Park, Myunghwan; Yoo, Seunghoon; Seol, Hyeongju; Kim, Cheonyoung; Hong, Youngseok

2015-04-01

While the factors affecting fighter pilots' G level tolerance have been widely accepted, the factors affecting fighter pilots' G duration tolerance have not been well understood. Thirty-eight subjects wearing anti-G suits were exposed to sustained high G forces using a centrifuge. The subjects exerted AGSM and decelerated the centrifuge when they reached the point of loss of peripheral vision. The G profile consisted of a +2.3 G onset rate, +7.3 G single plateau, and -1.6 G offset rate. Each subject's G tolerance time was recorded and the relationship between the tolerance time and the subject's anthropometric and physiological factors were analyzed. The mean tolerance time of the 38 subjects was 31.6 s, and the min and max tolerance times were 20 s and 58 s, respectively. The correlation analysis indicated that none of the factors had statistically significant correlations with the subjects' G duration tolerance. Stepwise multiple regression analysis showed that G duration tolerance was not dependent on any personal factors of the subjects. After the values of personal factors were simplified into 0 or 1, the t-test analysis showed that subjects' heights were inversely correlated with G duration tolerance at a statistically significant level. However, a logistic regression analysis suggested that the effect of the height factor to a pilot's G duration tolerance was too weak to be used as a predictor of a pilot's G tolerance. Fighter pilots' G duration tolerance could not be predicted by pilots' anthropometric and physiological factors.

Training for Efficiency: Work, Time and Systems-based Practice in Medical Residency*

PubMed Central

Szymczak, Julia E.; Bosk, Charles L.

2013-01-01

Medical residency is a period of intense socialization with a heavy workload. Previous sociological studies have identified efficiency as a practical skill necessary for success. However, many contextual features of the training environment have undergone dramatic change since these studies were conducted. What are the consequences of these changes for the socialization of residents to time management and the development of a professional identity? Based on observations of and interviews with internal medicine residents at 3 training programs, we find that efficiency is both a social norm and strategy that residents employ to manage a workload for which the demand for work exceeds the supply of time available to accomplish it. We found that residents struggle to be efficient in the face of seemingly intractable “systems” problems. Residents work around these problems, and in doing so develop a tolerance for organizational vulnerabilities. PMID:22863601

A Log-Scaling Fault Tolerant Agreement Algorithm for a Fault Tolerant MPI

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hursey, Joshua J; Naughton, III, Thomas J; Vallee, Geoffroy R

The lack of fault tolerance is becoming a limiting factor for application scalability in HPC systems. The MPI does not provide standardized fault tolerance interfaces and semantics. The MPI Forum's Fault Tolerance Working Group is proposing a collective fault tolerant agreement algorithm for the next MPI standard. Such algorithms play a central role in many fault tolerant applications. This paper combines a log-scaling two-phase commit agreement algorithm with a reduction operation to provide the necessary functionality for the new collective without any additional messages. Error handling mechanisms are described that preserve the fault tolerance properties while maintaining overall scalability.

76 FR 5704 - Sulfentrazone; Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-02

... subgroups. This regulation also deletes a time- limited tolerance on bean, succulent seed without pod (lima bean and cowpea), as the tolerance expired on December 31, 2007. Interregional Research Project Number... deletes the time-limited tolerance for bean, succulent seed without pod (lima bean and cowpea) at 0.1 ppm...

Real-time mapping of salt glands on the leaf surface of Cynodon dactylon L. using scanning electrochemical microscopy.

PubMed

Parthasarathy, Meera; Pemaiah, Brindha; Natesan, Ravichandran; Padmavathy, Saralla R; Pachiappan, Jayaraman

2015-02-01

Salt glands are specialized organelles present in the leaf tissues of halophytes, which impart salt-tolerance capability to the plant species. These glands are usually identified only by their morphology using conventional staining procedures coupled with optical microscopy. In this work, we have employed scanning electrochemical microscopy to identify the salt glands not only by their morphology but also by their salt excretion behavior. Bermuda grass (Cynodon dactylon L.) species was chosen for the study as they are known to be salt-tolerant and contain salt glands on leaf surfaces. Scanning electrochemical microscopy performed in sodium chloride medium in the presence and absence of potassium ferrocyanide as redox mediator, reveals the identity of salt glands. More insight into the ion expulsion behavior of these glands was obtained by mapping lateral and vertical variations in ion concentrations using surface impedance measurements which indicated five times higher resistance over the salt glands compared to the surrounding tissues and bulk solution. The protocol could be used to understand the developmental processes in plants grown in different soil/water conditions in order to improve salt tolerance of food crops by genetic engineering and hence improve their agricultural productivity.

Ultra-high resolution water window x ray microscope optics design and analysis

NASA Technical Reports Server (NTRS)

Shealy, David L.; Wang, C.

1993-01-01

This project has been focused on the design and analysis of an ultra-high resolution water window soft-x-ray microscope. These activities have been accomplished by completing two tasks contained in the statement of work of this contract. The new results from this work confirm: (1) that in order to achieve resolutions greater than three times the wavelength of the incident radiation, it will be necessary to use spherical mirror surfaces and to use graded multilayer coatings on the secondary in order to accommodate the large variations of the angle of incidence over the secondary when operating the microscope at numerical apertures of 0.35 or greater; (2) that surface contour errors will have a significant effect on the optical performance of the microscope and must be controlled to a peak-to-valley variation of 50-100 A and a frequency of 8 periods over the surface of a mirror; and (3) that tolerance analysis of the spherical Schwarzschild microscope has been shown that the water window operations will require 2-3 times tighter tolerances to achieve a similar performance of operations with 130 A radiation. These results have been included in a manuscript included in the appendix.

Statistical Tolerance and Clearance Analysis for Assembly

NASA Technical Reports Server (NTRS)

Lee, S.; Yi, C.

1996-01-01

Tolerance is inevitable because manufacturing exactly equal parts is known to be impossible. Furthermore, the specification of tolerances is an integral part of product design since tolerances directly affect the assemblability, functionality, manufacturability, and cost effectiveness of a product. In this paper, we present statistical tolerance and clearance analysis for the assembly. Our proposed work is expected to make the following contributions: (i) to help the designers to evaluate products for assemblability, (ii) to provide a new perspective to tolerance problems, and (iii) to provide a tolerance analysis tool which can be incorporated into a CAD or solid modeling system.

An Overt Chemical Protective Garment Reduces Thermal Strain Compared with a Covert Garment in Warm-Wet but Not Hot-Dry Environments.

PubMed

Maley, Matthew J; Costello, Joseph T; Borg, David N; Bach, Aaron J E; Hunt, Andrew P; Stewart, Ian B

2017-01-01

Objectives: A commercial chemical, biological, radiological and nuclear (CBRN) protective covert garment has recently been developed with the aim of reducing thermal strain. A covert CBRN protective layer can be worn under other clothing, with equipment added for full chemical protection when needed. However, it is unknown whether the covert garment offers any alleviation to thermal strain during work compared with a traditional overt ensemble. Therefore, the aim of this study was to compare thermal strain and work tolerance times during work in an overt and covert ensemble offering the same level of CBRN protection. Methods : Eleven male participants wore an overt (OVERT) or covert (COVERT) CBRN ensemble and walked (4 km·h -1 , 1% grade) for a maximum of 120 min in either a wet bulb globe temperature [WBGT] of 21, 30, or 37°C (Neutral, WarmWet and HotDry, respectively). The trials were ceased if the participants' gastrointestinal temperature reached 39°C, heart rate reached 90% of maximum, walking time reached 120 min or due to self-termination. Results: All participants completed 120 min of walking in Neutral. Work tolerance time was greater in OVERT compared with COVERT in WarmWet ( P < 0.001, 116.5[9.9] vs. 88.9[12.2] min, respectively), though this order was reversed in HotDry ( P = 0.003, 37.3[5.3] vs. 48.4[4.6] min, respectively). The rate of change in mean body temperature and mean skin temperature was greater in COVERT (0.025[0.004] and 0.045[0.010]°C·min -1 , respectively) compared with OVERT (0.014[0.004] and 0.027[0.007]°C·min -1 , respectively) in WarmWet ( P < 0.001 and P = 0.028, respectively). However, the rate of change in mean body temperature and mean skin temperature was greater in OVERT (0.068[0.010] and 0.170[0.026]°C·min -1 , respectively) compared with COVERT (0.059[0.004] and 0.120[0.017]°C·min -1 , respectively) in HotDry ( P = 0.002 and P < 0.001, respectively). Thermal sensation, thermal comfort, and ratings of perceived exertion did not differ between garments at trial cessation ( P > 0.05). Conclusion: Those dressed in OVERT experienced lower thermal strain and longer work tolerance times compared with COVERT in a warm-wet environment. However, COVERT may be an optimal choice in a hot-dry environment. These findings have practical implications for those making decisions on the choice of CBRN ensemble to be used during work.

An Overt Chemical Protective Garment Reduces Thermal Strain Compared with a Covert Garment in Warm-Wet but Not Hot-Dry Environments

PubMed Central

Maley, Matthew J.; Costello, Joseph T.; Borg, David N.; Bach, Aaron J. E.; Hunt, Andrew P.; Stewart, Ian B.

2017-01-01

Objectives: A commercial chemical, biological, radiological and nuclear (CBRN) protective covert garment has recently been developed with the aim of reducing thermal strain. A covert CBRN protective layer can be worn under other clothing, with equipment added for full chemical protection when needed. However, it is unknown whether the covert garment offers any alleviation to thermal strain during work compared with a traditional overt ensemble. Therefore, the aim of this study was to compare thermal strain and work tolerance times during work in an overt and covert ensemble offering the same level of CBRN protection. Methods: Eleven male participants wore an overt (OVERT) or covert (COVERT) CBRN ensemble and walked (4 km·h−1, 1% grade) for a maximum of 120 min in either a wet bulb globe temperature [WBGT] of 21, 30, or 37°C (Neutral, WarmWet and HotDry, respectively). The trials were ceased if the participants' gastrointestinal temperature reached 39°C, heart rate reached 90% of maximum, walking time reached 120 min or due to self-termination. Results: All participants completed 120 min of walking in Neutral. Work tolerance time was greater in OVERT compared with COVERT in WarmWet (P < 0.001, 116.5[9.9] vs. 88.9[12.2] min, respectively), though this order was reversed in HotDry (P = 0.003, 37.3[5.3] vs. 48.4[4.6] min, respectively). The rate of change in mean body temperature and mean skin temperature was greater in COVERT (0.025[0.004] and 0.045[0.010]°C·min−1, respectively) compared with OVERT (0.014[0.004] and 0.027[0.007]°C·min−1, respectively) in WarmWet (P < 0.001 and P = 0.028, respectively). However, the rate of change in mean body temperature and mean skin temperature was greater in OVERT (0.068[0.010] and 0.170[0.026]°C·min−1, respectively) compared with COVERT (0.059[0.004] and 0.120[0.017]°C·min−1, respectively) in HotDry (P = 0.002 and P < 0.001, respectively). Thermal sensation, thermal comfort, and ratings of perceived exertion did not differ between garments at trial cessation (P > 0.05). Conclusion: Those dressed in OVERT experienced lower thermal strain and longer work tolerance times compared with COVERT in a warm-wet environment. However, COVERT may be an optimal choice in a hot-dry environment. These findings have practical implications for those making decisions on the choice of CBRN ensemble to be used during work. PMID:29170644

Benefits of supplemental oxygen in exercise training in nonhypoxemic chronic obstructive pulmonary disease patients.

PubMed

Emtner, Margareta; Porszasz, Janos; Burns, Mary; Somfay, Attila; Casaburi, Richard

2003-11-01

Supplemental oxygen improves exercise tolerance of normoxemic and hypoxemic chronic obstructive pulmonary disease (COPD) patients. We determined whether nonhypoxemic COPD patients undergoing exercise training while breathing supplemental oxygen achieve higher intensity and therefore improve exercise capacity more than patients breathing air. A double-blinded trial was performed involving 29 nonhypoxemic patients (67 years, exercise SaO2 > 88%) with COPD (FEV1 = 36% predicted). All exercised on cycle ergometers for 45 minutes, 3 times per week for 7 weeks at high-intensity targets. During exercise, they received oxygen (3 L/minute) (n = 14) or compressed air (3 L/minute) (n = 15). Both groups had a higher exercise tolerance after training and when breathing oxygen. However, the oxygen-trained group increased the training work rate more rapidly than the air-trained group. The mean +/- SD work rate during the last week was 62 +/- 19 W (oxygen-trained group) and 52 +/- 22 W (air-trained group) (p < 0.01). After training, endurance in constant work rate tests increased more in the oxygen-trained group (14.5 minutes) than in the air-trained group (10.5 minutes) (p < 0.05). At isotime, the breathing rate decreased four breaths per minute in the oxygen-trained group and one breath per minute in the air-trained group (p = 0.001). We conclude that supplemental oxygen provided during high-intensity training yields higher training intensity and evidence of gains in exercise tolerance in laboratory testing.

High intensity interval exercise is an effective alternative to moderate intensity exercise for improving glucose tolerance and insulin sensitivity in adolescent boys.

PubMed

Cockcroft, Emma J; Williams, Craig A; Tomlinson, Owen W; Vlachopoulos, Dimitris; Jackman, Sarah R; Armstrong, Neil; Barker, Alan R

2015-11-01

High-intensity interval exercise (HIIE) may offer a time efficient means to improve health outcomes compared to moderate-intensity exercise (MIE). This study examined the acute effect of HIIE compared to a work-matched bout of MIE on glucose tolerance, insulin sensitivity (IS), resting fat oxidation and exercise enjoyment in adolescent boys. Within-measures design with counterbalanced experimental conditions. Nine boys (14.2 ± 0.4 years) completed three conditions on separate days in a counterbalanced order: (1) HIIE; (2) work matched MIE, both on a cycle ergometer; and (3) rest (CON). An oral glucose tolerance test (OGTT) was performed after exercise or rest and the area under curve (AUC) responses for plasma [glucose] and [insulin] were calculated, and IS estimated (Cederholm index). Energy expenditure and fat oxidation were measured following the OGTT using indirect calorimetry. Exercise enjoyment was assessed using the Physical Activity Enjoyment Scale. The incremental AUC (iAUC) for plasma [glucose] was reduced following both MIE (-23.9%, P = 0.013, effect size [ES] = -0.64) and HIIE (-28.9%, P=0.008, ES = -0.84) compared to CON. The iAUC for plasma [insulin] was lower for HIIE (-24.2%, P = 0.021, ES = -0.71) and MIE (-29.1%, P = 0.012, ES = -0.79) compared to CON. IS increased by 11.2% after HIIE (P = 0.03, ES = 0.76) and 8.4% after MIE (P = 0.10, ES = 0.58). There was a trend for an increase in fat oxidation following HIIE (P = 0.097, ES = 0.70). Both HIIE and MIE were rated as equally enjoyable (P > 0.05, ES < 0.01). A single bout of time efficient HIIE is an effective alternative to MIE for improving glucose tolerance and IS in adolescent boys immediately after exercise. Copyright © 2014 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

The DESCARTES-Nantes survey of kidney transplant recipients displaying clinical operational tolerance identifies 35 new tolerant patients and 34 almost tolerant patients.

PubMed

Massart, Annick; Pallier, Annaïck; Pascual, Julio; Viklicky, Ondrej; Budde, Klemens; Spasovski, Goce; Klinger, Marian; Sever, Mehmet Sukru; Sørensen, Søren Schwartz; Hadaya, Karine; Oberbauer, Rainer; Dudley, Christopher; De Fijter, Johan W; Yussim, Alexander; Hazzan, Marc; Wekerle, Thomas; Berglund, David; De Biase, Consuelo; Pérez-Sáez, María José; Mühlfeld, Anja; Orlando, Giuseppe; Clemente, Katia; Lai, Quirino; Pisani, Francesco; Kandus, Aljosa; Baas, Marije; Bemelman, Frederike; Ponikvar, Jadranka Buturovic; Mazouz, Hakim; Stratta, Piero; Subra, Jean-François; Villemain, Florence; Hoitsma, Andries; Braun, Laura; Cantarell, Maria Carmen; Colak, Hulya; Courtney, Aisling; Frasca, Giovanni Maria; Howse, Matthew; Naesens, Maarten; Reischig, Tomas; Serón, Daniel; Seyahi, Nurhan; Tugmen, Cem; Alonso Hernandez, Angel; Beňa, Luboslav; Biancone, Luigi; Cuna, Vania; Díaz-Corte, Carmen; Dufay, Alexandre; Gaasbeek, André; Garnier, Arnaud; Gatault, Philippe; Gentil Govantes, Miguel Angel; Glowacki, François; Gross, Oliver; Hurault de Ligny, Bruno; Huynh-Do, Uyen; Janbon, Bénédicte; Jiménez Del Cerro, Luis Antonio; Keller, Frieder; La Manna, Gaetano; Lauzurica, Ricardo; Le Monies De Sagazan, Hervé; Thaiss, Friedrich; Legendre, Christophe; Martin, Séverine; Moal, Marie-Christine; Noël, Christian; Pillebout, Evangeline; Piredda, Gian Benedetto; Puga, Ana Ramírez; Sulowicz, Wladyslaw; Tuglular, Serhan; Prokopova, Michaela; Chesneau, Mélanie; Le Moine, Alain; Guérif, Pierrick; Soulillou, Jean-Paul; Abramowicz, Marc; Giral, Magali; Racapé, Judith; Maggiore, Umberto; Brouard, Sophie; Abramowicz, Daniel

2016-06-01

Kidney recipients maintaining a prolonged allograft survival in the absence of immunosuppressive drugs and without evidence of rejection are supposed to be exceptional. The ERA-EDTA-DESCARTES working group together with Nantes University launched a European-wide survey to identify new patients, describe them and estimate their frequency for the first time. Seventeen coordinators distributed a questionnaire in 256 transplant centres and 28 countries in order to report as many 'operationally tolerant' patients (TOL; defined as having a serum creatinine <1.7 mg/dL and proteinuria <1 g/day or g/g creatinine despite at least 1 year without any immunosuppressive drug) and 'almost tolerant' patients (minimally immunosuppressed patients (MIS) receiving low-dose steroids) as possible. We reported their number and the total number of kidney transplants performed at each centre to calculate their frequency. One hundred and forty-seven questionnaires were returned and we identified 66 TOL (61 with complete data) and 34 MIS patients. Of the 61 TOL patients, 26 were previously described by the Nantes group and 35 new patients are presented here. Most of them were noncompliant patients. At data collection, 31/35 patients were alive and 22/31 still operationally tolerant. For the remaining 9/31, 2 were restarted on immunosuppressive drugs and 7 had rising creatinine of whom 3 resumed dialysis. Considering all patients, 10-year death-censored graft survival post-immunosuppression weaning reached 85% in TOL patients and 100% in MIS patients. With 218 913 kidney recipients surveyed, cumulative incidences of operational tolerance and almost tolerance were estimated at 3 and 1.5 per 10 000 kidney recipients, respectively. In kidney transplantation, operational tolerance and almost tolerance are infrequent findings associated with excellent long-term death-censored graft survival. © The Author 2016. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Ambiguity and uncertainty tolerance, need for cognition, and their association with stress. A study among Italian practicing physicians

PubMed Central

Iannello, Paola; Mottini, Anna; Tirelli, Simone; Riva, Silvia; Antonietti, Alessandro

2017-01-01

ABSTRACT Medical practice is inherently ambiguous and uncertain. The physicians’ ability to tolerate ambiguity and uncertainty has been proved to have a great impact on clinical practice. The primary aim of the present study was to test the hypothesis that higher degree of physicians’ ambiguity and uncertainty intolerance and higher need for cognitive closure will predict higher work stress. Two hundred and twelve physicians (mean age = 42.94 years; SD = 10.72) from different medical specialties with different levels of expertise were administered a set of questionnaires measuring perceived levels of work-related stress, individual ability to tolerate ambiguity, stress deriving from uncertainty, and personal need for cognitive closure. A linear regression analysis was performed to examine which variables predict the perceived level of stress. The regression model was statistically significant [R2 = .32; F(10,206) = 8.78, p ≤ .001], thus showing that, after controlling for gender and medical specialty, ambiguity and uncertainty tolerance, decisiveness (a dimension included in need for closure), and the years of practice were significant predictors of perceived work-related stress. Findings from the present study have some implications for medical education. Given the great impact that the individual ability to tolerate ambiguity and uncertainty has on the physicians’ level of perceived work-related stress, it would be worth paying particular attention to such a skill in medical education settings. It would be crucial to introduce or to empower educational tools and strategies that could increase medical students’ ability to tolerate ambiguity and uncertainty. Abbreviations: JSQ: Job stress questionnaire; NFCS: Need for cognitive closure scale; PRU: Physicians’ reactions to uncertainty; TFA: Tolerance for ambiguity PMID:28178917

Ambiguity and uncertainty tolerance, need for cognition, and their association with stress. A study among Italian practicing physicians.

PubMed

Iannello, Paola; Mottini, Anna; Tirelli, Simone; Riva, Silvia; Antonietti, Alessandro

2017-01-01

Medical practice is inherently ambiguous and uncertain. The physicians' ability to tolerate ambiguity and uncertainty has been proved to have a great impact on clinical practice. The primary aim of the present study was to test the hypothesis that higher degree of physicians' ambiguity and uncertainty intolerance and higher need for cognitive closure will predict higher work stress. Two hundred and twelve physicians (mean age = 42.94 years; SD = 10.72) from different medical specialties with different levels of expertise were administered a set of questionnaires measuring perceived levels of work-related stress, individual ability to tolerate ambiguity, stress deriving from uncertainty, and personal need for cognitive closure. A linear regression analysis was performed to examine which variables predict the perceived level of stress. The regression model was statistically significant [R 2  = .32; F(10,206) = 8.78, p ≤ .001], thus showing that, after controlling for gender and medical specialty, ambiguity and uncertainty tolerance, decisiveness (a dimension included in need for closure), and the years of practice were significant predictors of perceived work-related stress. Findings from the present study have some implications for medical education. Given the great impact that the individual ability to tolerate ambiguity and uncertainty has on the physicians' level of perceived work-related stress, it would be worth paying particular attention to such a skill in medical education settings. It would be crucial to introduce or to empower educational tools and strategies that could increase medical students' ability to tolerate ambiguity and uncertainty. JSQ: Job stress questionnaire; NFCS: Need for cognitive closure scale; PRU: Physicians' reactions to uncertainty; TFA: Tolerance for ambiguity.

Can we well assess the relative efficacy and tolerability of a new drug versus others at the time of marketing authorization using mixed treatment comparisons? A detailed illustration with escitalopram

PubMed Central

Llorca, Pierre-Michel; Lançon, Christophe; Brignone, Mélanie; Painchault, Caroline; Rive, Benoit; Toumi, Mondher; François, Clément

2015-01-01

Objective To assess the variation of relative efficacy and tolerability of an antidepressant versus others based on both pre-marketing (registration studies) and post-marketing studies versus pre-marketing studies only in patients with major depressive disorder. Methods The relative efficacy and tolerability of antidepressants was assessed by mixed treatment comparisons (MTCs) using data acquired over two time periods: before registration of the reference drug escitalopram (1989–2002) and up to 5 years later (1989–2007). Ranking probability outputs were presented for efficacy, using change from baseline to 8 weeks on Montgomery–Åsberg Depression Rating Scale total score, and tolerability, using withdrawals due to adverse events. Results The relative efficacy and tolerability of some selected antidepressants, including escitalopram, varied considerably over the two time periods. The improved relative efficacy and tolerability of escitalopram over time, compared with citalopram, was demonstrated by greater separation of ranking probability curves for efficacy and tolerability. In 2002, escitalopram ranked low with 13.9% and 5.1% probability of being in the top four antidepressants’ relative efficacy and tolerability, respectively. In 2007, ranking probabilities for relative efficacy and tolerability of escitalopram increased to 52.5% and 82.1%, respectively. Conclusions Time of marketing authorization may not be the most appropriate time to evaluate the relative efficacy and tolerability of a new antidepressant based on MTC approach due to the asymmetry of information between new and older compounds. However, the first evaluation of relative effect of a new drug for health technology assessment recommendations is commonly done at this time. Re-evaluation of a drug several years after its launch is likely to provide a more accurate indication of its relative efficacy and tolerability. PMID:27123184

Thermal tolerance reduces hyperthermia-induced disruption of working memory: a role for endogenous opiates?

PubMed

Mickley, G A; Cobb, B L

1998-03-01

Previous reports indicate that microwave-induced hyperthermia can impair learning and memory. Here, we report that preexposure to a single 20-min period of hyperthermia can produce thermal tolerance and, thereby, attenuate future physiological and behavioral reactions to heating. Because endogenous opioids have been implicated in thermoregulation and reactions to microwave exposure, we also determined how opioid receptor antagonism might modulate these effects. In an initial experiment, rats were exposed daily, over 5 successive days, to 600-MHz microwaves (at a whole-body specific absorption rate of 9.3 W/kg) or sham exposed. In animals exposed to microwaves, thermal tolerance was evidenced by declining rectal temperatures over time. Temperature reductions following microwave exposure were prominent after a single previous exposure. Therefore, in a second study, a single hyperthermic episode was used to induce thermal tolerance. On Day 1, rats were either exposed, over a 20-min period, to 600-MHz microwaves (at a whole-body specific absorption rate of 9.3 W/kg) or sham exposed. Just prior to radiation/sham-radiation treatment, rats received either saline or naltrexone (0.1 or 10 mg/kg, intraperitoneally (i.p.)). The following day (Day 2), rats were either microwave or sham exposed and tested on a task which measures the relative time subjects explore a familiar versus a novel stimulus object. Normothermic rats spend significantly more time in contact with new environmental components and less time with familiar objects. Brain (dura) and rectal temperatures were recorded on both days of the study. Microwave exposure produced a reliable hyperthermia which was significantly lower (on Day 2) in rats receiving repeated treatments (tolerant group). On the behavioral test, rats exposed only once to microwave-induced hyperthermia (nontolerant group) exhibited significantly different patterns of object discrimination than did tolerant or sham-exposed animals. Sham-exposed and tolerant animals showed a distinct preference for the new object whereas the nontolerant animals did not. Naltrexone (10 mg/kg) antagonized the hyperthermia-induced disruption of the object discrimination task (in nontolerant rats) and produced patterns of object exploration that were similar to those of sham-irradiated and thermal-tolerant rats, suggesting that endogenous opioids play a role in the organism's response to heating. Taken together, these data are consistent with the conclusions that 1) microwave-induced hyperthermia can cause a dose-dependent disruption of the normal discrimination between new and familiar objects, 2) physiological reactions to a single hyperthermic episode can produce a thermotolerance that expresses itself in both reduced levels of hyperthermia and attenuated behavioral disruptions following microwave exposure, and 3) opioid antagonism can partially reverse some of the behavioral effects of microwave-induced hyperthermia.

Optimization of Aerospace Structure Subject to Damage Tolerance Criteria

NASA Technical Reports Server (NTRS)

Akgun, Mehmet A.

1999-01-01

The objective of this cooperative agreement was to seek computationally efficient ways to optimize aerospace structures subject to damage tolerance criteria. Optimization was to involve sizing as well as topology optimization. The work was done in collaboration with Steve Scotti, Chauncey Wu and Joanne Walsh at the NASA Langley Research Center. Computation of constraint sensitivity is normally the most time-consuming step of an optimization procedure. The cooperative work first focused on this issue and implemented the adjoint method of sensitivity computation in an optimization code (runstream) written in Engineering Analysis Language (EAL). The method was implemented both for bar and plate elements including buckling sensitivity for the latter. Lumping of constraints was investigated as a means to reduce the computational cost. Adjoint sensitivity computation was developed and implemented for lumped stress and buckling constraints. Cost of the direct method and the adjoint method was compared for various structures with and without lumping. The results were reported in two papers. It is desirable to optimize topology of an aerospace structure subject to a large number of damage scenarios so that a damage tolerant structure is obtained. Including damage scenarios in the design procedure is critical in order to avoid large mass penalties at later stages. A common method for topology optimization is that of compliance minimization which has not been used for damage tolerant design. In the present work, topology optimization is treated as a conventional problem aiming to minimize the weight subject to stress constraints. Multiple damage configurations (scenarios) are considered. Each configuration has its own structural stiffness matrix and, normally, requires factoring of the matrix and solution of the system of equations. Damage that is expected to be tolerated is local and represents a small change in the stiffness matrix compared to the baseline (undamaged) structure. The exact solution to a slightly modified set of equations can be obtained from the baseline solution economically without actually solving the modified system. Sherrnan-Morrison-Woodbury (SMW) formulas are matrix update formulas that allow this. SMW formulas were therefore used here to compute adjoint displacements for sensitivity computation and structural displacements in damaged configurations.

Nurses' daily life: gender relations from the time spent in hospital.

PubMed

Pereira, Audrey Vidal

2015-01-01

to analyze the everyday life of nurses through the sexual work division as well as through interdependence relations and the time in hospital. quanti-qualitative study, based on the Time Use Survey and in Norbert Elias's Configuration Theory of Interdependencies. Daily shifts distribution record, directed by 42 participants--with self-confrontation--by interviews which drew dialogues on subjective aspects of the everyday experiences related to use of time, based on a job at a university hospital. The theoretical intake that founded data analysis was based on concepts of conflicts of interest, power struggles, sexual work division and polychronic-monochronic concepts--whether the work environment demands multitasking nurses or not. time records allowed to observe differences between the groups studied, useful to identify conflicts, tensions, power struggles and gender inequalities in interviewees' everyday affairs that do not only affect physical and mental health, but also their way of life. the analytical path pointed out the need for public policies that promote equity in gender relations, keeping at sight the exercise of plural discourses and tolerant stances capable to respect differences between individual and collective time.

Teaching Tolerance: Notes from the Front Line.

ERIC Educational Resources Information Center

Heller, Carol; Hawkins, Joseph A.

1994-01-01

The Southern Poverty Law Center's (Alabama) Teaching Tolerance Project provides free products and services to teachers and schools working to promote racial tolerance. Other programs combatting racism include the Westridge Young Writers Workshop, Facing History and Ourselves, the Sidewalk Theatre of New York, the Fratney School (Wisconsin), and…

The ecological genomic basis of salinity adaptation in Tunisian Medicago truncatula.

PubMed

Friesen, Maren L; von Wettberg, Eric J B; Badri, Mounawer; Moriuchi, Ken S; Barhoumi, Fathi; Chang, Peter L; Cuellar-Ortiz, Sonia; Cordeiro, Matilde A; Vu, Wendy T; Arraouadi, Soumaya; Djébali, Naceur; Zribi, Kais; Badri, Yazid; Porter, Stephanie S; Aouani, Mohammed Elarbi; Cook, Douglas R; Strauss, Sharon Y; Nuzhdin, Sergey V

2014-12-22

As our world becomes warmer, agriculture is increasingly impacted by rising soil salinity and understanding plant adaptation to salt stress can help enable effective crop breeding. Salt tolerance is a complex plant phenotype and we know little about the pathways utilized by naturally tolerant plants. Legumes are important species in agricultural and natural ecosystems, since they engage in symbiotic nitrogen-fixation, but are especially vulnerable to salinity stress. Our studies of the model legume Medicago truncatula in field and greenhouse settings demonstrate that Tunisian populations are locally adapted to saline soils at the metapopulation level and that saline origin genotypes are less impacted by salt than non-saline origin genotypes; these populations thus likely contain adaptively diverged alleles. Whole genome resequencing of 39 wild accessions reveals ongoing migration and candidate genomic regions that assort non-randomly with soil salinity. Consistent with natural selection acting at these sites, saline alleles are typically rare in the range-wide species' gene pool and are also typically derived relative to the sister species M. littoralis. Candidate regions for adaptation contain genes that regulate physiological acclimation to salt stress, such as abscisic acid and jasmonic acid signaling, including a novel salt-tolerance candidate orthologous to the uncharacterized gene AtCIPK21. Unexpectedly, these regions also contain biotic stress genes and flowering time pathway genes. We show that flowering time is differentiated between saline and non-saline populations and may allow salt stress escape. This work nominates multiple potential pathways of adaptation to naturally stressful environments in a model legume. These candidates point to the importance of both tolerance and avoidance in natural legume populations. We have uncovered several promising targets that could be used to breed for enhanced salt tolerance in crop legumes to enhance food security in an era of increasing soil salinization.

A Study of Interactions among Ambiguity Tolerance, Classroom Work Styles, and English Proficiency

ERIC Educational Resources Information Center

Chiang, Hui-Hua

2016-01-01

This article presents a preliminary investigation of the inter-relationships between English learners' tolerance for ambiguity, their classroom work styles, and their level of English proficiency. The study population comprised 46 English as a foreign language (EFL) students attending a technical college in Taiwan. The findings indicated that a…

Estimation of Subjective Mental Work Load Level with Heart Rate Variability by Tolerance to Driver's Mental Load

NASA Astrophysics Data System (ADS)

Yokoi, Toshiyuki; Itoh, Michimasa; Oguri, Koji

Most of the traffic accidents have been caused by inappropriate driver's mental state. Therefore, driver monitoring is one of the most important challenges to prevent traffic accidents. Some studies for evaluating the driver's mental state while driving have been reported; however driver's mental state should be estimated in real-time in the future. This paper proposes a way to estimate quantitatively driver's mental workload using heart rate variability. It is assumed that the tolerance to driver's mental workload is different depending on the individual. Therefore, we classify people based on their individual tolerance to mental workload. Our estimation method is multiple linear regression analysis, and we compare it to NASA-TLX which is used as the evaluation method of subjective mental workload. As a result, the coefficient of correlation improved from 0.83 to 0.91, and the standard deviation of error also improved. Therefore, our proposed method demonstrated the possibility to estimate mental workload.

Fault-Tolerant Algorithms for Connectivity Restoration in Wireless Sensor Networks.

PubMed

Zeng, Yali; Xu, Li; Chen, Zhide

2015-12-22

As wireless sensor network (WSN) is often deployed in a hostile environment, nodes in the networks are prone to large-scale failures, resulting in the network not working normally. In this case, an effective restoration scheme is needed to restore the faulty network timely. Most of existing restoration schemes consider more about the number of deployed nodes or fault tolerance alone, but fail to take into account the fact that network coverage and topology quality are also important to a network. To address this issue, we present two algorithms named Full 2-Connectivity Restoration Algorithm (F2CRA) and Partial 3-Connectivity Restoration Algorithm (P3CRA), which restore a faulty WSN in different aspects. F2CRA constructs the fan-shaped topology structure to reduce the number of deployed nodes, while P3CRA constructs the dual-ring topology structure to improve the fault tolerance of the network. F2CRA is suitable when the restoration cost is given the priority, and P3CRA is suitable when the network quality is considered first. Compared with other algorithms, these two algorithms ensure that the network has stronger fault-tolerant function, larger coverage area and better balanced load after the restoration.

40 CFR 176.9 - Publication of a tolerance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Publication of a tolerance. 176.9... TIME-LIMITED TOLERANCES FOR EMERGENCY EXEMPTIONS § 176.9 Publication of a tolerance. (a) If EPA issues... tolerance under this part may be established without prior publication of a proposed tolerance or comment...

Coordinated Fault Tolerance for High-Performance Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dongarra, Jack; Bosilca, George; et al.

2013-04-08

Our work to meet our goal of end-to-end fault tolerance has focused on two areas: (1) improving fault tolerance in various software currently available and widely used throughout the HEC domain and (2) using fault information exchange and coordination to achieve holistic, systemwide fault tolerance and understanding how to design and implement interfaces for integrating fault tolerance features for multiple layers of the software stack—from the application, math libraries, and programming language runtime to other common system software such as jobs schedulers, resource managers, and monitoring tools.

[Working overseas and cardiovascular diseases: application of a screening method on Oil&Gas employees].

PubMed

Cappelli, M I; Macchione, M; Pulini, S; Aquilina, T; Cancanelli, G

2012-01-01

Working overseas is a reality for decades in the Oil&Gas Industry and many noxae impact on the cardiovascular system. In fitness to work evaluation the physician should consider besides the conventional risk factors, the presence of cardiovascular diseases, and prevent their evolution. A cardiovascular screening and follow up after 2 years was carried out on 42 Oil&Gas employees, over 45 of age, during medical fitness to work. The main tests were ECG, exercise tolerance test (ETT) and echocardiocolordoppler, completed with other instrumental tests. Cardiovascular diseases causing unfitness to working overseas occurred in 7%, blood hypertension in 23%. The screening permitted to diagnose and correct acute cardiovascular diseases, that caused unfitness to work, and disease that can get worse related to occupational risk. Moreover it was fundamental for evaluation of fitness and timing of health surveillance.

Tolerance to repeated nicotine administration on performance, subjective, and physiological responses in nonsmokers.

PubMed

Heishman, S J; Henningfield, J E

2000-10-01

When administered acutely to nonsmokers, nicotine's effects on performance are inconsistent, perhaps because of suboptimal dosing or initial dysphoria that could interfere with performance. The purpose of this study was to determine if a range of nicotine doses administered for 8 days to nonsmokers would enhance psychomotor and cognitive abilities and to document the development of nicotine tolerance or sensitization. Twelve male volunteers, who reported ever smoking five cigarettes or less, participated in 8 consecutive experimental days in which they were administered four doses of nicotine polacrilex gum each day in this order: 0, 2, 4, and 8 mg. Performance, subjective, and physiological measures were assessed before and after each dose. Plasma nicotine concentration ranged from 6.9 to 11.5 ng/ml following the 8 mg dose. Nicotine increased rate of responding and decreased response time on working memory (digit recall); however, accuracy was impaired. Nicotine also decreased accuracy on visual scanning and attention (two-letter search), and the 8 mg dose impaired gross motor coordination (circular lights). Tolerance did not develop to the performance impairing effects of nicotine. Nicotine produced dose-related increases in ratings of dysphoria and negative mood, including tension, anxiety, nervousness, turning of stomach, and sedation. Tolerance developed to some, but not all, of these aversive effects. Tolerance also was not observed to the increased cardiovascular measures. Although tolerance developed to some of the aversive effects of nicotine, performance enhancement was not observed. These data do not support the hypothesis that nicotine-induced performance enhancement contributes to the reinforcing effects of tobacco use during the early stages of dependence development.

The first step toward genetic selection for host tolerance to infectious pathogens: obtaining the tolerance phenotype through group estimates

PubMed Central

Doeschl-Wilson, Andrea B.; Villanueva, Beatriz; Kyriazakis, Ilias

2012-01-01

Reliable phenotypes are paramount for meaningful quantification of genetic variation and for estimating individual breeding values on which genetic selection is based. In this paper, we assert that genetic improvement of host tolerance to disease, although desirable, may be first of all handicapped by the ability to obtain unbiased tolerance estimates at a phenotypic level. In contrast to resistance, which can be inferred by appropriate measures of within host pathogen burden, tolerance is more difficult to quantify as it refers to change in performance with respect to changes in pathogen burden. For this reason, tolerance phenotypes have only been specified at the level of a group of individuals, where such phenotypes can be estimated using regression analysis. However, few stsudies have raised the potential bias in these estimates resulting from confounding effects between resistance and tolerance. Using a simulation approach, we demonstrate (i) how these group tolerance estimates depend on within group variation and co-variation in resistance, tolerance, and vigor (performance in a pathogen free environment); and (ii) how tolerance estimates are affected by changes in pathogen virulence over the time course of infection and by the timing of measurements. We found that in order to obtain reliable group tolerance estimates, it is important to account for individual variation in vigor, if present, and that all individuals are at the same stage of infection when measurements are taken. The latter requirement makes estimation of tolerance based on cross-sectional field data challenging, as individuals become infected at different time points and the individual onset of infection is unknown. Repeated individual measurements of within host pathogen burden and performance would not only be valuable for inferring the infection status of individuals in field conditions, but would also provide tolerance estimates that capture the entire time course of infection. PMID:23412990

Design of a fault tolerant airborne digital computer. Volume 2: Computational requirements and technology

NASA Technical Reports Server (NTRS)

Ratner, R. S.; Shapiro, E. B.; Zeidler, H. M.; Wahlstrom, S. E.; Clark, C. B.; Goldberg, J.

1973-01-01

This final report summarizes the work on the design of a fault tolerant digital computer for aircraft. Volume 2 is composed of two parts. Part 1 is concerned with the computational requirements associated with an advanced commercial aircraft. Part 2 reviews the technology that will be available for the implementation of the computer in the 1975-1985 period. With regard to the computation task 26 computations have been categorized according to computational load, memory requirements, criticality, permitted down-time, and the need to save data in order to effect a roll-back. The technology part stresses the impact of large scale integration (LSI) on the realization of logic and memory. Also considered was module interconnection possibilities so as to minimize fault propagation.

Software fault tolerance for real-time avionics systems

NASA Technical Reports Server (NTRS)

Anderson, T.; Knight, J. C.

1983-01-01

Avionics systems have very high reliability requirements and are therefore prime candidates for the inclusion of fault tolerance techniques. In order to provide tolerance to software faults, some form of state restoration is usually advocated as a means of recovery. State restoration can be very expensive for systems which utilize concurrent processes. The concurrency present in most avionics systems and the further difficulties introduced by timing constraints imply that providing tolerance for software faults may be inordinately expensive or complex. A straightforward pragmatic approach to software fault tolerance which is believed to be applicable to many real-time avionics systems is proposed. A classification system for software errors is presented together with approaches to recovery and continued service for each error type.

Metacognitive self-reflectivity moderates the relationship between distress tolerance and empathy in schizophrenia.

PubMed

Bonfils, Kelsey A; Minor, Kyle S; Leonhardt, Bethany L; Lysaker, Paul H

2018-07-01

Deficits in empathy seen in schizophrenia are thought to play a major role in the social dysfunction seen in the disorder. However, little work has investigated potential determinants of empathic deficits. This study aimed to fill that gap by examining the effects of two variables on empathy - distress tolerance and metacognitive self-reflectivity. Fifty-four people with schizophrenia-spectrum disorders receiving services at an urban VA or community mental health center were assessed for empathy, metacognition, and distress tolerance. Bivariate correlations and moderation methods were used to ascertain associations amongst these variables and examine interactions. Results revealed that, against hypotheses, empathy was not related at the bivariate level to either distress tolerance or metacognitive self-reflectivity. However, consistent with hypotheses, moderation analyses revealed that participants with higher self-reflectivity showed no relationship between distress tolerance and empathy, while those with lower self-reflectivity showed a relationship such that reduced ability to tolerate distress predicted reduced empathy. Taken together, results of this study suggest that lack of distress tolerance can negatively affect empathy in people with schizophrenia with lesser capacity for metacognitive self-reflection; thus, fostering self-reflectivity may help overcome that negative impact. Future work is needed investigating the impact of metacognitively-tailored interventions on empathy in this population. Copyright © 2018. Published by Elsevier B.V.

Randomised, double-blind, placebo-controlled trial of EPs 7630 in adults with COPD.

PubMed

Matthys, Heinrich; Pliskevich, Dina A; Bondarchuk, Oleksandr M; Malek, Fathi A; Tribanek, Michael; Kieser, Meinhard

2013-05-01

Preventing and managing exacerbations is one major component in COPD treatment. We investigated whether EPs 7630, a herbal drug preparation from the roots of Pelargonium sidoides, could prolong time to acute exacerbation in patients with COPD stage II/III. In this randomised, double-blind, placebo-controlled clinical trial, patients were randomly allocated to oral 24-week add-on therapy with 3 × 30 drops/day EPs 7630 (n = 99) or placebo (n = 101) to a standardised baseline-treatment. Primary endpoint was time to first exacerbation of COPD. Secondary endpoints were number of exacerbations, consumption of antibiotics, quality of life, patient satisfaction, inability to work, and tolerability. Median time to exacerbation was significantly prolonged with EPs 7630 compared to placebo (57 versus 43 days, Kaplan-Maier-estimate; p = 0.005, one-sided centre-stratified log-rank test). The superiority of EPs 7630 was also confirmed in secondary endpoints, e.g., fewer exacerbations, less patients with antibiotic use, improved quality of life, higher patient satisfaction, and less days of inability to work. The incidence of minor gastrointestinal adverse events was higher in the EPs 7630 group. The results demonstrate a statistically significant and clinically relevant superiority of add-on therapy with EPs 7630 over placebo and a good long-term tolerability in the treatment of moderate to severe COPD. EPs 7630 prolonged time to exacerbations and reduced exacerbation frequency and antibiotic use. Trial Registration No.: ISRCTN01681733. Copyright © 2013 Elsevier Ltd. All rights reserved.

Extensive Acclimation in Ectotherms Conceals Interspecific Variation in Thermal Tolerance Limits

PubMed Central

Pintor, Anna F. V.; Schwarzkopf, Lin; Krockenberger, Andrew K.

2016-01-01

Species’ tolerance limits determine their capacity to tolerate climatic extremes and limit their potential distributions. Interspecific variation in thermal tolerances is often proposed to indicate climatic vulnerability and is, therefore, the subject of many recent meta-studies on differential capacities of species from climatically different habitats to deal with climate change. Most studies on thermal tolerances do not acclimate animals or use inconsistent, and insufficient, acclimation times, limiting our knowledge of the shape, duration and extent of acclimation responses. Consequently patterns in thermal tolerances observed in meta-analyses, based on data from the literature are based on inconsistent, partial acclimation and true trends may be obscured. In this study we describe time-course of complete acclimation of critical thermal minima in the tropical ectotherm Carlia longipes and compare it to the average acclimation response of other reptiles, estimated from published data, to assess how much acclimation time may contribute to observed differences in thermal limits. Carlia longipes decreased their lower critical thermal limits by 2.4°C and completed 95% of acclimation in 17 weeks. Wild populations did not mirror this acclimation process over the winter. Other reptiles appear to decrease cold tolerance more quickly (95% in 7 weeks) and to a greater extent, with an estimated average acclimation response of 6.1°C. However, without data on tolerances after longer acclimation times available, our capacity to estimate final acclimation state is very limited. Based on the subset of data available for meta-analysis, much of the variation in cold tolerance observed in the literature can be attributed to acclimation time. Our results indicate that (i) acclimation responses can be slow and substantial, even in tropical species, and (ii) interspecific differences in acclimation speed and extent may obscure trends assessed in some meta-studies. Cold tolerances of wild animals are representative of cumulative responses to recent environments, while lengthy acclimation is necessary for controlled comparisons of physiological tolerances. Measures of inconsistent, intermediate acclimation states, as reported by many studies, represent neither the realised nor the potential tolerance in that population, are very likely underestimates of species’ physiological capacities and may consequently be of limited value. PMID:26990769

Extensive Acclimation in Ectotherms Conceals Interspecific Variation in Thermal Tolerance Limits.

PubMed

Pintor, Anna F V; Schwarzkopf, Lin; Krockenberger, Andrew K

2016-01-01

Species' tolerance limits determine their capacity to tolerate climatic extremes and limit their potential distributions. Interspecific variation in thermal tolerances is often proposed to indicate climatic vulnerability and is, therefore, the subject of many recent meta-studies on differential capacities of species from climatically different habitats to deal with climate change. Most studies on thermal tolerances do not acclimate animals or use inconsistent, and insufficient, acclimation times, limiting our knowledge of the shape, duration and extent of acclimation responses. Consequently patterns in thermal tolerances observed in meta-analyses, based on data from the literature are based on inconsistent, partial acclimation and true trends may be obscured. In this study we describe time-course of complete acclimation of critical thermal minima in the tropical ectotherm Carlia longipes and compare it to the average acclimation response of other reptiles, estimated from published data, to assess how much acclimation time may contribute to observed differences in thermal limits. Carlia longipes decreased their lower critical thermal limits by 2.4°C and completed 95% of acclimation in 17 weeks. Wild populations did not mirror this acclimation process over the winter. Other reptiles appear to decrease cold tolerance more quickly (95% in 7 weeks) and to a greater extent, with an estimated average acclimation response of 6.1°C. However, without data on tolerances after longer acclimation times available, our capacity to estimate final acclimation state is very limited. Based on the subset of data available for meta-analysis, much of the variation in cold tolerance observed in the literature can be attributed to acclimation time. Our results indicate that (i) acclimation responses can be slow and substantial, even in tropical species, and (ii) interspecific differences in acclimation speed and extent may obscure trends assessed in some meta-studies. Cold tolerances of wild animals are representative of cumulative responses to recent environments, while lengthy acclimation is necessary for controlled comparisons of physiological tolerances. Measures of inconsistent, intermediate acclimation states, as reported by many studies, represent neither the realised nor the potential tolerance in that population, are very likely underestimates of species' physiological capacities and may consequently be of limited value.

Improved performance of analog and digital acousto-optic modulation with feedback under profiled beam propagation for secure communication using chaos

NASA Astrophysics Data System (ADS)

Almehmadi, Fares S.; Chatterjee, Monish R.

2014-12-01

Using intensity feedback, the closed-loop behavior of an acousto-optic hybrid device under profiled beam propagation has been recently shown to exhibit wider chaotic bands potentially leading to an increase in both the dynamic range and sensitivity to key parameters that characterize the encryption. In this work, a detailed examination is carried out vis-à-vis the robustness of the encryption/decryption process relative to parameter mismatch for both analog and pulse code modulation signals, and bit error rate (BER) curves are used to examine the impact of additive white noise. The simulations with profiled input beams are shown to produce a stronger encryption key (i.e., much lower parametric tolerance thresholds) relative to simulations with uniform plane wave input beams. In each case, it is shown that the tolerance for key parameters drops by factors ranging from 10 to 20 times below those for uniform plane wave propagation. Results are shown to be at consistently lower tolerances for secure transmission of analog and digital signals using parameter tolerance measures, as well as BER performance measures for digital signals. These results hold out the promise for considerably greater information transmission security for such a system.

ALLIANCE: An architecture for fault tolerant, cooperative control of heterogeneous mobile robots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, L.E.

1995-02-01

This research addresses the problem of achieving fault tolerant cooperation within small- to medium-sized teams of heterogeneous mobile robots. The author describes a novel behavior-based, fully distributed architecture, called ALLIANCE, that utilizes adaptive action selection to achieve fault tolerant cooperative control in robot missions involving loosely coupled, largely independent tasks. The robots in this architecture possess a variety of high-level functions that they can perform during a mission, and must at all times select an appropriate action based on the requirements of the mission, the activities of other robots, the current environmental conditions, and their own internal states. Since suchmore » cooperative teams often work in dynamic and unpredictable environments, the software architecture allows the team members to respond robustly and reliably to unexpected environmental changes and modifications in the robot team that may occur due to mechanical failure, the learning of new skills, or the addition or removal of robots from the team by human intervention. After presenting ALLIANCE, the author describes in detail experimental results of an implementation of this architecture on a team of physical mobile robots performing a cooperative box pushing demonstration. These experiments illustrate the ability of ALLIANCE to achieve adaptive, fault-tolerant cooperative control amidst dynamic changes in the capabilities of the robot team.« less

Predictors of noninvasive ventilation tolerance in patients with amyotrophic lateral sclerosis.

PubMed

Gruis, K L; Brown, D L; Schoennemann, A; Zebarah, V A; Feldman, E L

2005-12-01

Noninvasive ventilation (NIV) appears to improve survival and quality of life in patients with amyotrophic lateral sclerosis (ALS), but little is known about predictors of NIV tolerance. NIV use was assessed and clinical predictors of tolerance were investigated, using predictive modeling, in ALS patients diagnosed and followed in our clinic until death over a 4-year time period. Patients were prescribed NIV based on current practice parameters when respiratory symptoms were present or forced vital capacity was less than 50%. We prescribed NIV in 52% (72) of patients. For those prescribed NIV, information regarding tolerance was available for 50 patients, with 72% (36) tolerant to its use. Tolerance was six times more likely in limb-onset than bulbar-onset ALS patients, with a trend toward reduced tolerance in those with lower forced vital capacity at NIV initiation. Age, gender, and duration of disease were not predictors of NIV tolerance. We conclude that a majority of ALS patients who are prescribed NIV can successfully become tolerant to its use.

Effects of Starvation and Thermal Stress on the Thermal Tolerance of Silkworm, Bombyx mori: Existence of Trade-offs and Cross-Tolerances.

PubMed

Mir, A H; Qamar, A

2017-09-27

Organisms, in nature, are often subjected to multiple stressors, both biotic and abiotic. Temperature and starvation are among the main stressors experienced by organisms in their developmental cycle and the responses to these stressors may share signaling pathways, which affects the way these responses are manifested. Temperature is a major factor governing the performance of ectothermic organisms in ecosystems worldwide and, therefore, the thermal tolerance is a central issue in the thermobiology of these organisms. Here, we investigated the effects of starvation as well as mild heat and cold shocks on the thermal tolerance of the larvae of silkworm, Bombyx mori (Linnaeus). Starvation acted as a meaningful or positive stressor as it improved cold tolerance, measured as chill coma recovery time (CCRT), but, at the same time, it acted as a negative stressor and impaired the heat tolerance, measured as heat knockdown time (HKT). In the case of heat tolerance, starvation negated the positive effects of both mild cold as well as mild heat shocks and thus indicated the existence of trade-off between these stressors. Both mild heat and cold shocks improved the thermal tolerance, but the effects were more prominent when the indices were measured in response to a stressor of same type, i.e., a mild cold shock improved the cold tolerance more than the heat tolerance and vice versa. This improvement in thermal tolerance by both mild heat as well as cold shocks indicated the possibility of cross-tolerance between these stressors.

Determination of halothane-induced sleeping time in the rat: effect of prior administration of centrally active drugs.

PubMed Central

Turnbull, M J; Watkins, J W

1976-01-01

A method is described for the determination of halothane-induced sleeping time in the rat. 2 The sleeping time exhibited a diurnal variation which was due, at least in part, to a change in the sensitivity of the central nervous system (CNS) to the anaesthetic. 3 Tolerance to halothane did not develop in rats repeatedly exposed to the anaesthetic over a period of over 48 hours. 4 Repeated sleeping time determinations have been used to follow changes in the sensitivity of the CNS to the anaesthetic occurring with time. 5 A tolerance to halothane was induced by pretreatment of rats with doses of amylobarbitone, pentobarbitone or meprobamate sufficient to keep animals anaesthetized for approximately 12 hours. This tolerance was followed by a period of halothane-hypersensitivity. 6 Halothane-tolerant animals awakened with higher brain halothane concentrations and were also tolerant to intracerebroventricularly administered pentobarbitone. 7 Halothane-hypertensive rats awakened with lower brain halothane concentrations and were also hypersensitivity to intracerebroventricularly administered pentobarbitone. 8 The possibility that the induction of cross-tolerance to halothane may be indicative of a drug's potential to produce dependence is discussed. PMID:987820

A socio-cognitive strategy to address farmers' tolerance of high risk work: Disrupting the effects of apprenticeship of observation.

PubMed

Mazur, Joan M; Westneat, Susan

2017-02-01

Why do generations of farmers tolerate the high-risk work of agricultural work and resist safe farm practices? This study presents an analysis inspired by empirical data from studies conducted from 1993 to 2012 on the differing effects of farm safety interventions between participants who live or work on farms and those who don't, when both were learning to be farm safety advocates. Both groups show statistically significant gains in knowledge and behavioral change proxy measures. However, non-farm participants' gains consistently outstripped their live/work farm counterparts. Drawing on socio-cultural perspectives, a grounded theory qualitative analysis focused on identifying useful constructs to understand the farmers' resistance to adopt safety practices. Understanding apprenticeships of observation and its relation to experiential learning over time can expose sources of deeply anchored beliefs and how they operate insidiously to promote familiar, albeit unsafe farming practices. The challenge for intervention-prevention programs becomes how to disrupt what has been learned during these apprenticeships of observation and to address what has been obscured during this powerful socialization process. Implications focus on the design and implementation of farm safety prevention and education programs. First, farm safety advocates and prevention researchers need to attend to demographics and explicitly explore the prior experiences and background of safety program participants. Second, farm youth in particular need to explore, explicitly, their own apprenticeships of observations, preferably through the use of new social media and or digital forms of expression, resulting in a story repair process. Third, careful study of the organization of work and farm experiences and practices need to provide the foundations for intervention programs. Finally, it is crucial that farm safety programs understand apprenticeships of observation are generational and ongoing over time, and interventions prevention programs need to be 'in it' for the long haul. Copyright © 2016. Published by Elsevier Ltd.

Fostering Tolerance of Obesity through Empathy and Critical Reflection: A Curricular Unit Incorporating Filmed Testimonials

ERIC Educational Resources Information Center

Ogle, Jennifer Paff; Damhorst, Mary Lynn

2010-01-01

With the prevalence of overweight and obesity on the rise in America, the role of educators in creating transformative learning contexts that minimize obesity bias and that foster tolerance has become increasingly crucial. The purpose of this work was to develop and explore the effectiveness of a curricular unit to promote tolerance and…

40 CFR 86.115-78 - EPA urban dynamometer driving schedule.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the target schedule as closely as possible. The speed tolerance at any given time for these schedules... time. (3)(i) Speed variations greater than the tolerances (such as may occur during gear changes or... variations greater than the tolerance are acceptable, provided they occur for less than 15 seconds on any...

"That's so gay!" Exploring college students' attitudes toward the LGBT population.

PubMed

Holland, Laurel; Matthews, Todd L; Schott, Melinda R

2013-01-01

Traditional students are often introduced to unfamiliar subcultures for the first time on the college campus. Recent high school graduates find themselves transitioning from an atmosphere in which homophobia is likely to be tolerated and possibly even expected to an educational setting in which diversity is promoted. Research shows that the college years are influential in the re-socialization of core values, yet very little work focuses on the ideological shifts that may take place in attitudes toward the lesbian, gay, bisexual, and transgendered (LGBT) population. The research presented in this study includes a modified version of LaMar and Kite's Component Measure, which has been broken down into 6 distinctive components of tolerance. In addition to examining religion, gender, and race--factors that have been correlated in past research with differing levels of tolerance toward the LGBT community--this study adds politics, sexual orientation, academic class standing, and college of major--variables that have received little or no attention in this literature. Higher levels of LGBT tolerance are consistently observed across the indexes among women, more liberal Christian traditions, non-Christian faiths, the non-religious, and those who self-identify as LGBT. The distinctive contribution of this study is that students in the College of Arts and Sciences and students further along in their college careers are also more tolerant. Based on these findings, recommendations are made for inter-college curriculum changes that integrate students in all disciplines and students of all classifications.

Fault Tolerant Real-Time Systems

DTIC Science & Technology

1993-09-30

The ART (Advanced Real-Time Technology) Project of Carnegie Mellon University is engaged in wide ranging research on hard real - time systems . The...including hardware and software fault tolerance using temporal redundancy and analytic redundancy to permit the construction of real - time systems whose

Deciphering the role of the phenylpropanoid metabolism in the tolerance of Capsicum annuum L. to Verticillium dahliae Kleb.

PubMed

Novo, Marta; Silvar, Cristina; Merino, Fuencisla; Martínez-Cortés, Teresa; Lu, Fachuang; Ralph, John; Pomar, Federico

2017-05-01

Verticillium dahliae is an economically relevant soilborne pathogen that causes vascular wilt in several crops, including pepper (Capsicum annuum). Fungal infection is usually visualized as a vascular browning, likely due to the onset of phenylpropanoid metabolism, which also seems to play a crucial role in the tolerance of some pepper varieties. In the current work, the potential function of distinct phenylpropanoid derivatives (suberin, lignin and phenolic compounds) in the pepper tolerance response against V. dahliae, was investigated. Histochemical and biochemical analyses ruled out suberin as a key player in the pepper-fungus interaction. However, changes observed in lignin composition and higher deposition of bound phenolics in infected stems seemed to contribute to the reinforcement of cell walls and the impairment of V. dahliae colonization. Most importantly, this is the first time that the accumulation of the hydroxycinnamic acid amide N-feruloyltyramine was reported in pepper stems in response to a vascular fungus. Fungitoxic activity for that hydroxycinnamate-tyramine conjugate was demonstrated as well. Copyright © 2017 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brandt, Riley E.; Poindexter, Jeremy R.; Gorai, Prashun

Recently, we and others have proposed screening criteria for 'defect-tolerant' photovoltaic (PV) absorbers, identifying several classes of semiconducting compounds with electronic structures similar to those of hybrid lead-halide perovskites. In this work, we reflect on the accuracy and prospects of these new design criteria through a combined experimental and theoretical approach. We construct a model to extract photoluminescence lifetimes of six of these candidate PV absorbers, including four (InI, SbSI, SbSeI, and BiOI) for which time-resolved photoluminescence has not been previously reported. The lifetimes of all six candidate materials exceed 1 ns, a threshold for promising early stage PV devicemore » performance. However, there are variations between these materials, and none achieve lifetimes as high as those of the hybrid lead-halide perovskites, suggesting that the heuristics for defect-tolerant semiconductors are incomplete. Here, we explore this through first-principles point defect calculations and Shockley-Read-Hall recombination models to describe the variation between the measured materials. In light of these insights, we discuss the evolution of screening criteria for defect tolerance and high-performance PV materials.« less

Handling Ibuprofen Increases Pain Tolerance and Decreases Perceived Pain Intensity in a Cold Pressor Test

PubMed Central

Rutchick, Abraham M.; Slepian, Michael L.

2013-01-01

Pain contributes to health care costs, missed work and school, and lower quality of life. Extant research on psychological interventions for pain has focused primarily on developing skills that individuals can apply to manage their pain. Rather than examining internal factors that influence pain tolerance (e.g., pain management skills), the current work examines factors external to an individual that can increase pain tolerance. Specifically, the current study examined the nonconscious influence of exposure to meaningful objects on the perception of pain. Participants (N = 54) completed a cold pressor test, examined either ibuprofen or a control object, then completed another cold pressor test. In the second test, participants who previously examined ibuprofen reported experiencing less intense pain and tolerated immersion longer (relative to baseline) than those who examined the control object. Theoretical and applied implications of these findings are discussed. PMID:23469170

Attitudes toward women and tolerance for sexual harassment among reservists.

PubMed

Vogt, Dawne; Bruce, Tamara A; Street, Amy E; Stafford, Jane

2007-09-01

Women are more likely to experience sexual harassment in some work settings than others; specifically, work settings that have a large proportion of male workers, include a predominance of male supervisors, and represent traditional male occupations may be places in which there is greater tolerance for sexual harassment. The focus of the study was to document attitudes toward women among military personnel, to identify demographic and military characteristics associated with more positive attitudes toward women, and to examine associations between attitudes toward women and tolerance for sexual harassment. The study was based on data from 2,037 male and female former Reservists who reported minimal or no experiences of sexual harassment and no sexual assault in the military. Results suggest that attitudes toward women vary across content domains, are associated with several key demographic and military characteristics, and predict tolerance for sexual harassment. Implications of the findings and future directions are discussed.

Redundant and fault-tolerant algorithms for real-time measurement and control systems for weapon equipment.

PubMed

Li, Dan; Hu, Xiaoguang

2017-03-01

Because of the high availability requirements from weapon equipment, an in-depth study has been conducted on the real-time fault-tolerance of the widely applied Compact PCI (CPCI) bus measurement and control system. A redundancy design method that uses heartbeat detection to connect the primary and alternate devices has been developed. To address the low successful execution rate and relatively large waste of time slices in the primary version of the task software, an improved algorithm for real-time fault-tolerant scheduling is proposed based on the Basic Checking available time Elimination idle time (BCE) algorithm, applying a single-neuron self-adaptive proportion sum differential (PSD) controller. The experimental validation results indicate that this system has excellent redundancy and fault-tolerance, and the newly developed method can effectively improve the system availability. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Effect of Exercise Training and +Gz Acceleration Training on Men

NASA Technical Reports Server (NTRS)

Greenleaf, John E.; Simonson, Shawn R.; Stocks, Jodie M.; Evans, Joyce; Knapp, Charles F.; Cowell, Stephenie A.; Pemberton, Kendra N.; Wilson, Heather W.; Vener, Jamie M.; Evetts, Simon N.

2001-01-01

Countermeasures for reduction in work capacity (maximal oxygen uptake and strength) during spaceflight and enhanced orthostatic intolerance during re-entry, landing and egress from the return vehicle are continuing problems. The purpose for this study was to test the hypothesis that passive-acceleration training; supine, interval, exercise plus acceleration training and exercise combined with acceleration training would improve orthostatic tolerance in ambulatory men; and that addition of the aerobic exercise conditioning would not alter this improved tolerance from that of passive-acceleration training. Seven men (24-38 yr) underwent "Passive" training on the Ames human-powered centrifuge (HPC) for 30 min, "Exercise" training on the cycle ergometer with constant +Gz acceleration; and "Combined" exercise training at 40% to 90% of the HPC +Gz(max) exercise level. Maximal supine exercise loads increased significant (P<0.05) by 8.3% (Passive), 12.6% (Exercise), and by 15.4% (Combined) after training, but their post-training maximal oxygen uptakes and maximal heart rates were unchanged. Maximal time to fatigue (endurance) was unchanged with Passive was increased (P<0.05) with Exercise and Combined training. Thus, the exercise in the Exercise and Combined training Phases resulted in greater maximal loads and endurance without effect on maximal oxygen uptake or heart rate. There was a 4% to 6% increase (P<0.05) in all four quadriceps muscle volumes (right and left) after post-Combined training. Resting pre-tilt heart rate was elevated by 12.9% (P<0.05) only after Passive training suggesting that the exercise training attenuated the HR response. Plasma volume (% Delta) was uniformly decreased by 8% to 14% (P<0.05) at tilt-tolerance pre- vs. post-training indicating essentially no effect of training on the level of hypovolemia. Post-training tilt-tolerance time and heart rate were increased (P<0.05) only with Passive training by 37.8% and by 29.1%, respectively. Thus, addition of exercise training appeared to attenuate the increased Passive tilt-tolerance.

More than visual literacy: art and the enhancement of tolerance for ambiguity and empathy.

PubMed

Bentwich, Miriam Ethel; Gilbey, Peter

2017-11-10

Comfort with ambiguity, mostly associated with the acceptance of multiple meanings, is a core characteristic of successful clinicians. Yet past studies indicate that medical students and junior physicians feel uncomfortable with ambiguity. Visual Thinking Strategies (VTS) is a pedagogic approach involving discussions of art works and deciphering the different possible meanings entailed in them. However, the contribution of art to the possible enhancement of the tolerance for ambiguity among medical students has not yet been adequately investigated. We aimed to offer a novel perspective on the effect of art, as it is experienced through VTS, on medical students' tolerance of ambiguity and its possible relation to empathy. Quantitative method utilizing a short survey administered after an interactive VTS session conducted within mandatory medical humanities course for first-year medical students. The intervention consisted of a 90-min session in the form of a combined lecture and interactive discussions about art images. The VTS session and survey were filled by 67 students in two consecutive rounds of first-year students. 67% of the respondents thought that the intervention contributed to their acceptance of multiple possible meanings, 52% thought their visual observation ability was enhanced and 34% thought that their ability to feel the sufferings of other was being enhanced. Statistically significant moderate-to-high correlations were found between the contribution to ambiguity tolerance and contribution to empathy (0.528-0.744; p ≤ 0.01). Art may contribute especially to the development of medical students' tolerance of ambiguity, also related to the enhancement of empathy. The potential contribution of visual art works used in VTS to the enhancement of tolerance for ambiguity and empathy is explained based on relevant literature regarding the embeddedness of ambiguity within art works, coupled with reference to John Dewey's theory of learning. Given the situational nature of the tolerance for ambiguity in this context, VTS provides a path for enhancing ambiguity tolerance that is less conditioned by character traits. Moreover, the modest form of VTS we utilized, not requesting a significant alteration in the pre-clinical curricula, suggests that enhancing the tolerance of ambiguity and empathy among medical students may be particularly feasible.

Air-Cooled Stack Freeze Tolerance Freeze Failure Modes and Freeze Tolerance Strategies for GenDriveTM Material Handling Application Systems and Stacks Final Scientific Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hancock, David, W.

2012-02-14

Air-cooled stack technology offers the potential for a simpler system architecture (versus liquid-cooled) for applications below 4 kilowatts. The combined cooling and cathode air allows for a reduction in part count and hence a lower cost solution. However, efficient heat rejection challenges escalate as power and ambient temperature increase. For applications in ambient temperatures below freezing, the air-cooled approach has additional challenges associated with not overcooling the fuel cell stack. The focus of this project was freeze tolerance while maintaining all other stack and system requirements. Through this project, Plug Power advanced the state of the art in technology formore » air-cooled PEM fuel cell stacks and related GenDrive material handling application fuel cell systems. This was accomplished through a collaborative work plan to improve freeze tolerance and mitigate freeze-thaw effect failure modes within innovative material handling equipment fuel cell systems designed for use in freezer forklift applications. Freeze tolerance remains an area where additional research and understanding can help fuel cells to become commercially viable. This project evaluated both stack level and system level solutions to improve fuel cell stack freeze tolerance. At this time, the most cost effective solutions are at the system level. The freeze mitigation strategies developed over the course of this project could be used to drive fuel cell commercialization. The fuel cell system studied in this project was Plug Power's commercially available GenDrive platform providing battery replacement for equipment in the material handling industry. The fuel cell stacks were Ballard's commercially available FCvelocity 9SSL (9SSL) liquid-cooled PEM fuel cell stack and FCvelocity 1020ACS (Mk1020) air-cooled PEM fuel cell stack.« less

Topping cycle for coal-fueled electric power plants using the ceramic helical expander

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myers, B.; Landingham, R.; Mohr, P.

Ceramic helical expanders are advocated as the work output element in a 2500/sup 0/F direct coal-fired Brayton topping cycle for central power station application. When combined with a standard steam electric power plant cycle, such a cycle could result in an overall thermal conversion efficiency in excess of 50 percent. The performance, coal tolerance, and system-development-time advantages of the ceramic helical expander approach are enumerated. A perspective on the choice of design and materials is provided. A preliminary consideration of physical properties, economic questions, and service experience has led us to a preference for the silicon nitride and silicon carbidemore » family of materials. A program to confirm the performance and coal tolerance aspects of a ceramic helical expander system is planned.« less

SU-D-BRC-02: Application of Six Sigma Approach to Improve the Efficiency of Patient-Specific QA in Proton Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

LAH, J; Shin, D; Manger, R

Purpose: To show how the Six Sigma DMAIC (Define-Measure-Analyze-Improve-Control) can be used for improving and optimizing the efficiency of patient-specific QA process by designing site-specific range tolerances. Methods: The Six Sigma tools (process flow diagram, cause and effect, capability analysis, Pareto chart, and control chart) were utilized to determine the steps that need focus for improving the patient-specific QA process. The patient-specific range QA plans were selected according to 7 treatment site groups, a total of 1437 cases. The process capability index, Cpm was used to guide the tolerance design of patient site-specific range. We also analyzed the financial impactmore » of this project. Results: Our results suggested that the patient range measurements were non-capable at the current tolerance level of ±1 mm in clinical proton plans. The optimized tolerances were calculated for treatment sites. Control charts for the patient QA time were constructed to compare QA time before and after the new tolerances were implemented. It is found that overall processing time was decreased by 24.3% after establishing new site-specific range tolerances. The QA failure for whole process in proton therapy would lead up to a 46% increase in total cost. This result can also predict how costs are affected by changes in adopting the tolerance design. Conclusion: We often believe that the quality and performance of proton therapy can easily be improved by merely tightening some or all of its tolerance requirements. This can become costly, however, and it is not necessarily a guarantee of better performance. The tolerance design is not a task to be undertaken without careful thought. The Six Sigma DMAIC can be used to improve the QA process by setting optimized tolerances. When tolerance design is optimized, the quality is reasonably balanced with time and cost demands.« less

Income Mobility Breeds Tolerance for Income Inequality: Cross-National and Experimental Evidence.

PubMed

Shariff, Azim F; Wiwad, Dylan; Aknin, Lara B

2016-05-01

American politicians often justify income inequality by referencing the opportunities people have to move between economic stations. Though past research has shown associations between income mobility and resistance to wealth redistribution policies, no experimental work has tested whether perceptions of mobility influence tolerance for inequality. In this article, we present a cross-national comparison showing that income mobility is associated with tolerance for inequality and experimental work demonstrating that perceptions of higher mobility directly affect attitudes toward inequality. We find support for both the prospect of upward mobility and the view that peoples' economic station is the product of their own efforts, as mediating mechanisms. © The Author(s) 2016.

40 CFR 180.184 - Linuron; tolerances for residues.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Linuron; tolerances for residues. (a) General. Tolerances are established for residues of the herbicide.... Time-limited tolerances are established for residues of the herbicide linuron [3-(3,4-dichlorophenyl)-1... herbicide linuron (3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea), including its metabolites and degradates...

78 FR 38226 - Sulfoxaflor; Pesticide Tolerances; Technical Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-26

... and removing Sec. 180.670. This document additionally removes the time-limited tolerances for cotton, undelinted seed; cotton, gin byproducts; and cotton, hulls as the tolerances have been superseded by...-limited tolerances for cotton, undelinted seed; cotton, gin byproducts; and cotton, hulls contained in...

Geopathic stress zones: short-term effects on work performance and well-being?

PubMed

Augner, Christoph; Hacker, Gerhard W; Jekel, Ilse

2010-06-01

The aim of the study was to evaluate whether two different locations in the same room as tested by dowsers ("geopathic stress zone" [GSZ] versus "more neutral zone" [NZ]) would show significant short-term effects on work performance and well-being. It was also tested whether a device reported to "neutralize" GSZ would influence results obtained with the specific setup used in this study. This was a blinded, randomized, short-term laboratory experiment using a within-subject design. The study was conducted in the laboratory of the Research Institute for Frontier Questions of Medicine and Biotechnology at Salzburg Federal Hospital. The subjects were 26 persons, aged 20-57. Participants had to accomplish reaction tasks during three different conditions: GSZ, NZ, and GSZ with a device reported to "neutralize" GSZ. These conditions were counterbalanced into six different sequences and randomized to the subjects. At the end of each condition, a standardized well-being questionnaire had to be completed. Dependent variables were reactive stress tolerance (reaction time, timely right answers, right answers, false answers, left out) and well-being (described by six adjectives). No location-dependent effects on performance during reactive stress tolerance test were seen. For well-being, analysis of variance revealed a trend (p = 0.07) and showed significantly poorer well-being during the GSZ condition compared to NZ (p = 0.01). This study shows that well-being can be location dependent and that this might be caused by a so-called GSZ. However, in our short-term experiment, factors of work performance tested remained unaffected.

Fluid restriction during exercise in the heat reduces tolerance to progressive central hypovolaemia.

PubMed

Schlader, Zachary J; Gagnon, Daniel; Rivas, Eric; Convertino, Victor A; Crandall, Craig G

2015-08-01

What is the central question of this study? Interactions between dehydration, as occurs during exercise in the heat without fluid replacement, and hyperthermia on the ability to tolerate central hypovolaemia are unknown. What is the main finding and its importance? We show that inadequate fluid intake during exercise in the heat can impair tolerance to central hypovolaemia even when it elicits only mild dehydration. These findings suggest that hydration during physical work in the heat has important military and occupational relevance for protection against the adverse effects of a subsequent haemorrhagic injury. This study tested the hypothesis that dehydration induced via exercise in the heat impairs tolerance to central hypovolaemia. Eleven male subjects (32 ± 7 years old, 81.5 ± 11.1 kg) walked (O2 uptake 1.7 ± 0.4 l min(-1) ) in a 40°C, 30% relative humidity environment on three occasions, as follows: (i) subjects walked for 90 min, drinking water to offset sweat loss (Hydrated, n = 11); (ii) water intake was restricted, and exercise was terminated when intestinal temperature increased to the same level as in the Hydrated trial (Isothermic Dehydrated, n = 11); and (iii) water intake was restricted, and exercise duration was 90 min (Time Match Dehydrated, n = 9). For each trial, tolerance to central hypovolaemia was determined following exercise via progressive lower body negative pressure and quantified as time to presyncope. Increases in intestinal temperature prior to lower body negative pressure were not different (P = 0.91) between Hydrated (1.1 ± 0.4°C) and Isothermic Dehydrated trials (1.1 ± 0.4°C), but both were lower than in the Time Match Dehydrated trial (1.7 ± 0.5°C, P < 0.01). Prior to lower body negative pressure, body weight was unchanged in the Hydrated trial (-0.1 ± 0.2%), but was reduced in Isothermic Dehydrated (-0.9 ± 0.4%) and further so in Time Match Dehydrated trial (-1.9 ± 0.6%, all P < 0.01). Time to presyncope was greater in Hydrated (14.7 ± 3.2 min) compared with Isothermic Dehydrated (11.9 ± 3.3 min, P < 0.01) and Time Match Dehydrated trials (10.2 ± 1.6 min, P = 0.03), which were not different (P = 0.19). These data indicate that inadequate fluid intake during exercise in the heat reduces tolerance to central hypovolaemia independent of increases in body temperature. © 2015 The Authors. Experimental Physiology © 2015 The Physiological Society.

Effects of Heavy Metals and Arbuscular Mycorrhiza on the Leaf Proteome of a Selected Poplar Clone: A Time Course Analysis

PubMed Central

Lingua, Guido; Bona, Elisa; Todeschini, Valeria; Cattaneo, Chiara; Marsano, Francesco; Berta, Graziella; Cavaletto, Maria

2012-01-01

Arbuscular mycorrhizal (AM) fungi establish a mutualistic symbiosis with the roots of most plant species. While receiving photosynthates, they improve the mineral nutrition of the plant and can also increase its tolerance towards some pollutants, like heavy metals. Although the fungal symbionts exclusively colonize the plant roots, some plant responses can be systemic. Therefore, in this work a clone of Populus alba L., previously selected for its tolerance to copper and zinc, was used to investigate the effects of the symbiosis with the AM fungus Glomus intraradices on the leaf protein expression. Poplar leaf samples were collected from plants maintained in a glasshouse on polluted (copper and zinc contaminated) or unpolluted soil, after four, six and sixteen months of growth. For each harvest, about 450 proteins were reproducibly separated on 2DE maps. At the first harvest the most relevant effect on protein modulation was exerted by the AM fungi, at the second one by the metals, and at the last one by both treatments. This work demonstrates how importantly the time of sampling affects the proteome responses in perennial plants. In addition, it underlines the ability of a proteomic approach, targeted on protein identification, to depict changes in a specific pattern of protein expression, while being still far from elucidating the biological function of each protein. PMID:22761694

The ventilatory anaerobic threshold is related to, but is lower than, the critical power, but does not explain exercise tolerance at this workrate.

PubMed

Okudan, N; Gökbel, H

2006-03-01

The aim of the present study was to investigate the relationships between critical power (CP), maximal aerobic power and the anaerobic threshold and whether exercise time to exhaustion and work at the CP can be used as an index in the determination of endurance. An incremental maximal cycle exercise test was performed on 30 untrained males aged 18-22 years. Lactate analysis was carried out on capillary blood samples at every 2 minutes. From gas exchange parameters and heart rate and lactate values, ventilatory anaerobic thresholds, heart rate deflection point and the onset of blood lactate accumulation were calculated. CP was determined with linear work-time method using 3 loads. The subjects exercised until they could no longer maintain a cadence above 24 rpm at their CP and exercise time to exhaustion was determined. CP was lower than the power output corresponding to VO2max, higher than the power outputs corresponding to anaerobic threshold. CP was correlated with VO2max and anaerobic threshold. Exercise time to exhaustion and work at CP were not correlated with VO2max and anaerobic threshold. Because of the correlations of the CP with VO2max and anaerobic threshold and no correlation of exercise time to exhaustion and work at the CP with these parameters, we conclude that exercise time to exhaustion and work at the CP cannot be used as an index in the determination of endurance.

Investigation of a rotary valving system with variable valve timing for internal combustion engines

NASA Astrophysics Data System (ADS)

Cross, Paul C.; Hansen, Craig N.

1994-11-01

The objective of the program was to provide a functional demonstration of the Hansen Rotary Valving System with Variable Valve Timing (HRVS/VVT), capable of throttleless inlet charge control, as an alternative to conventional poppet-valves for use in spark ignited internal combustion engines. The goal of this new technology is to secure benefits in fuel economy, broadened torque band, vibration reduction, and overhaul accessibility. Additionally, use of the variable valve timing capability to vary the effective compression ratio is expected to improve multifuel tolerance and efficiency. Efforts directed at the design of HRVS components proved to be far more extensive than had been anticipated, ultimately requiring that proof-trial design/development work be performed. Although both time and funds were exhausted before optical or ion-probe types of in-cylinder investigation could be undertaken, a great deal of laboratory data was acquired during the course of the design/development work. This laboratory data is the basis for the information presented in this final report.

A curriculum for real-time computer and control systems engineering

NASA Technical Reports Server (NTRS)

Halang, Wolfgang A.

1990-01-01

An outline of a syllabus for the education of real-time-systems engineers is given. This comprises the treatment of basic concepts, real-time software engineering, and programming in high-level real-time languages, real-time operating systems with special emphasis on such topics as task scheduling, hardware architectures, and especially distributed automation structures, process interfacing, system reliability and fault-tolerance, and integrated project development support systems. Accompanying course material and laboratory work are outlined, and suggestions for establishing a laboratory with advanced, but low-cost, hardware and software are provided. How the curriculum can be extended into a second semester is discussed, and areas for possible graduate research are listed. The suitable selection of a high-level real-time language and supporting operating system for teaching purposes is considered.

Pseudomonas aeruginosa adapts to octenidine in the laboratory and a simulated clinical setting, leading to increased tolerance to chlorhexidine and other biocides.

PubMed

Shepherd, M J; Moore, G; Wand, M E; Sutton, J M; Bock, L J

2018-03-31

Octenidine is frequently used for infection prevention in neonatal and burn intensive care units, where Pseudomonas aeruginosa has caused nosocomial outbreaks. To investigate the efficacy and impact of using octenidine against P. aeruginosa. Seven clinical isolates of P. aeruginosa were exposed to increasing concentrations of octenidine over several days. Fitness, minimum bactericidal concentrations after 1 min, 5 min and 24 h, and minimum inhibitory concentrations (MICs) of a variety of antimicrobials were measured for the parental and octenidine-adapted P. aeruginosa strains. Octenidine and chlorhexidine MICs of a population of P. aeruginosa isolated from a hospital drain trap, exposed to a diluted octenidine formulation four times daily for three months, were also tested. Some planktonic cultures of P. aeruginosa survived >50% of the working concentration of an in-use octenidine formulation at the recommended exposure time. Seven strains of P. aeruginosa stably adapted following continuous exposure to increasing concentrations of octenidine. Adaptation increased tolerance to octenidine formulations and chlorhexidine up to 32-fold. In one strain, it also led to increased MICs of antipseudomonal drugs. Subsequent to continuous octenidine exposure of a multi-species community in a simulated clinical setting, up to eight-fold increased tolerance to octenidine and chlorhexidine of P. aeruginosa was also found, which was lost upon removal of octenidine. Incorrect use of octenidine formulations may lead to inadequate decontamination, and even increased tolerance of P. aeruginosa to octenidine, with resulting cross-resistance to other biocides. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

Selective labelling and eradication of antibiotic-tolerant bacterial populations in Pseudomonas aeruginosa biofilms

PubMed Central

Chua, Song Lin; Yam, Joey Kuok Hoong; Hao, Piliang; Adav, Sunil S.; Salido, May Margarette; Liu, Yang; Givskov, Michael; Sze, Siu Kwan; Tolker-Nielsen, Tim; Yang, Liang

2016-01-01

Drug resistance and tolerance greatly diminish the therapeutic potential of antibiotics against pathogens. Antibiotic tolerance by bacterial biofilms often leads to persistent infections, but its mechanisms are unclear. Here we use a proteomics approach, pulsed stable isotope labelling with amino acids (pulsed-SILAC), to quantify newly expressed proteins in colistin-tolerant subpopulations of Pseudomonas aeruginosa biofilms (colistin is a ‘last-resort' antibiotic against multidrug-resistant Gram-negative pathogens). Migration is essential for the formation of colistin-tolerant biofilm subpopulations, with colistin-tolerant cells using type IV pili to migrate onto the top of the colistin-killed biofilm. The colistin-tolerant cells employ quorum sensing (QS) to initiate the formation of new colistin-tolerant subpopulations, highlighting multicellular behaviour in antibiotic tolerance development. The macrolide erythromycin, which has been previously shown to inhibit the motility and QS of P. aeruginosa, boosts biofilm eradication by colistin. Our work provides insights on the mechanisms underlying the formation of antibiotic-tolerant populations in bacterial biofilms and indicates research avenues for designing more efficient treatments against biofilm-associated infections. PMID:26892159

Selective labelling and eradication of antibiotic-tolerant bacterial populations in Pseudomonas aeruginosa biofilms.

PubMed

Chua, Song Lin; Yam, Joey Kuok Hoong; Hao, Piliang; Adav, Sunil S; Salido, May Margarette; Liu, Yang; Givskov, Michael; Sze, Siu Kwan; Tolker-Nielsen, Tim; Yang, Liang

2016-02-19

Drug resistance and tolerance greatly diminish the therapeutic potential of antibiotics against pathogens. Antibiotic tolerance by bacterial biofilms often leads to persistent infections, but its mechanisms are unclear. Here we use a proteomics approach, pulsed stable isotope labelling with amino acids (pulsed-SILAC), to quantify newly expressed proteins in colistin-tolerant subpopulations of Pseudomonas aeruginosa biofilms (colistin is a 'last-resort' antibiotic against multidrug-resistant Gram-negative pathogens). Migration is essential for the formation of colistin-tolerant biofilm subpopulations, with colistin-tolerant cells using type IV pili to migrate onto the top of the colistin-killed biofilm. The colistin-tolerant cells employ quorum sensing (QS) to initiate the formation of new colistin-tolerant subpopulations, highlighting multicellular behaviour in antibiotic tolerance development. The macrolide erythromycin, which has been previously shown to inhibit the motility and QS of P. aeruginosa, boosts biofilm eradication by colistin. Our work provides insights on the mechanisms underlying the formation of antibiotic-tolerant populations in bacterial biofilms and indicates research avenues for designing more efficient treatments against biofilm-associated infections.

Physiological Tolerance to Uncompensable Heat Stress: Effects of Exercise Intensity, Protective Clothing, and Climate

DTIC Science & Technology

1994-01-01

Physiological tolerance to uncompensable heat stress: effects of exercise intensity, protective clothing , and climate SCOTT J. MONTAIN, MICHAEL N...effects of exercise 26), there remains little information to predict the inci- intensity, protective clothing , and climate. J. AppL PhysioL dence of...that pre- exercise intensity, protective clothing level, and climate on dict the physiological responses and work capability dur- physiological tolerance

Advanced development for space robotics with emphasis on fault tolerance

NASA Technical Reports Server (NTRS)

Tesar, D.; Chladek, J.; Hooper, R.; Sreevijayan, D.; Kapoor, C.; Geisinger, J.; Meaney, M.; Browning, G.; Rackers, K.

1995-01-01

This paper describes the ongoing work in fault tolerance at the University of Texas at Austin. The paper describes the technical goals the group is striving to achieve and includes a brief description of the individual projects focusing on fault tolerance. The ultimate goal is to develop and test technology applicable to all future missions of NASA (lunar base, Mars exploration, planetary surveillance, space station, etc.).

Feasibility of using the linac real-time log data for VMAT treatment verification

NASA Astrophysics Data System (ADS)

Midi, N. S.; Zin, Hafiz M.

2017-05-01

This study investigates the feasibility of using the real-time log data from a linac to verify Volumetric Modulated Arc Therapy (VMAT) treatment. The treatment log data for an Elekta Synergy linac can be recorded at a sampling rate of 4 Hz using the service graphing tool on the linac control computer. A treatment plan that simulates a VMAT treatment was delivered from the linac and all the dynamic treatment parameters including monitor unit (MU), Multileaf Collimator (MLC) position, jaw position, gantry angle and collimator angle were recorded in real-time using the service graphing tool. The recorded raw data were extracted and analysed using algorithms written in Matlab (MathWorks, Natick, MA). The actual treatment parameters logged using the service graphing tool was compared to the prescription and the deviations were analysed. The MLC position errors travelling at the speed range from -3.25 to 5.92 cm/s were between -1.7 mm to 2.5 mm, well within the 3.5 mm tolerance value (AAPM TG-142). The discrepancies of other delivery parameters were also within the tolerance. The real-time linac parameters logged using the service graphing tool can be used as a supplementary data for patient specific VMAT pre-treatment quality assurance.

40 CFR 180.576 - Cyhalofop-butyl; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Cyhalofop-butyl; tolerances for... § 180.576 Cyhalofop-butyl; tolerances for residues. (a) General. Time-limited tolerances are established for combined residues of cyhalofop (cyhalofop-butyl, R-(+)-n-butyl-2-(4(4-cyano-2-fluorophenoxy...

40 CFR 180.576 - Cyhalofop-butyl; tolerances for residues.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Cyhalofop-butyl; tolerances for... § 180.576 Cyhalofop-butyl; tolerances for residues. (a) General. Time-limited tolerances are established for combined residues of cyhalofop (cyhalofop-butyl, R-(+)-n-butyl-2-(4(4-cyano-2-fluorophenoxy...

48 CFR 22.304 - Variations, tolerances, and exemptions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Variations, tolerances, and exemptions. 22.304 Section 22.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Contract Work Hours...

48 CFR 22.304 - Variations, tolerances, and exemptions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Variations, tolerances, and exemptions. 22.304 Section 22.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SOCIOECONOMIC PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Contract Work Hours...

Species ecology determines the role of nitrogen nutrition in the frost tolerance of pine seedlings.

PubMed

Toca, Andrei; Oliet, Juan A; Villar-Salvador, Pedro; Maroto, Judit; Jacobs, Douglass F

2018-01-01

Frost determines the evolution and distribution of plants in temperate and cold regions. Several environmental factors can influence frost acclimation of woody plants but the magnitude and direction of the effect of nitrogen (N) availability is controversial. We studied the effect of N availability on root and shoot frost tolerance in mid-fall and in winter in seedlings of four pines of contrasting ecology: Pinus nigra J.F. Arnold, P. pinaster Ait., P. pinea L. and P. halepensis Mill.. Organ N and soluble sugar concentration, and timing of cessation of shoot elongation were measured to assess the physiological mechanisms underlying frost acclimation. Nitrogen was supplied at high and low rates only during the pre-hardening period and at a moderate N rate during hardening in the fall. Shoot frost tolerance increased over winter while root frost tolerance did not change in any species. Pre-hardening N availability affected the frost tolerance of both roots and shoots, although the effect was species-specific: high N reduced the overall root and shoot frost tolerance in P. pinea and P. halepensis, and increased the frost tolerance in P. nigra, but had no effect in P. pinaster. Nitrogen supply in the fall consistently increased frost tolerance in all species. Differences in frost tolerance among species and N treatments were not explained by variations in organ N or soluble carbohydrate concentration, nor by timing of cessation of shoot elongation; however, the most frost tolerant species ceased elongation earlier than the least frost tolerant species. Despite the close phylogenetic relatedness of the studied species, the effect of N availability on seedling frost tolerance differed among species, indicating that species ecology (especially frost acclimation physiology) and timing of N supply drives the effect of N availability on frost tolerance of pine species. © The Author(s) 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Successful pod infections by Moniliophthora roreri result in differential Theobroma cacao gene expression depending on the clone's level of tolerance.

PubMed

Ali, Shahin S; Melnick, Rachel L; Crozier, Jayne; Phillips-Mora, Wilberth; Strem, Mary D; Shao, Jonathan; Zhang, Dapeng; Sicher, Richard; Meinhardt, Lyndel; Bailey, Bryan A

2014-09-01

An understanding of the tolerance mechanisms of Theobroma cacao used against Moniliophthora roreri, the causal agent of frosty pod rot, is important for the generation of stable disease-tolerant clones. A comparative view was obtained of transcript populations of infected pods from two susceptible and two tolerant clones using RNA sequence (RNA-Seq) analysis. A total of 3009 transcripts showed differential expression among clones. KEGG (Kyoto Encyclopedia of Genes and Genomes) pathway analysis of differentially expressed genes indicated shifts in 152 different metabolic pathways between the tolerant and susceptible clones. Real-time quantitative reverse transcription polymerase chain reaction (real-time qRT-PCR) analyses of 36 genes verified the differential expression. Regression analysis validated a uniform progression in gene expression in association with infection levels and fungal loads in the susceptible clones. Expression patterns observed in the susceptible clones diverged in tolerant clones, with many genes showing higher expression at a low level of infection and fungal load. Principal coordinate analyses of real-time qRT-PCR data separated the gene expression patterns between susceptible and tolerant clones for pods showing malformation. Although some genes were constitutively differentially expressed between clones, most results suggested that defence responses were induced at low fungal load in the tolerant clones. Several elicitor-responsive genes were highly expressed in tolerant clones, suggesting rapid recognition of the pathogen and induction of defence genes. Expression patterns suggested that the jasmonic acid-ethylene- and/or salicylic acid-mediated defence pathways were activated in the tolerant clones, being enhanced by reduced brassinosteroid (BR) biosynthesis and catabolic inactivation of both BR and abscisic acids. Finally, several genes associated with hypersensitive response-like cell death were also induced in tolerant clones. © 2014 BSPP AND JOHN WILEY & SONS LTD.

Tempo and mode of the multiple origins of salinity tolerance in a water beetle lineage.

PubMed

Arribas, Paula; Andújar, Carmelo; Abellán, Pedro; Velasco, Josefa; Millán, Andrés; Ribera, Ignacio

2014-02-01

Salinity is one of the most important drivers of the distribution, abundance and diversity of organisms. Previous studies on the evolution of saline tolerance have been mainly centred on marine and terrestrial organisms, while lineages inhabiting inland waters remain largely unexplored. This is despite the fact that these systems include a much broader range of salinities, going from freshwater to more than six times the salinity of the sea (i.e. >200 g/L). Here, we study the pattern and timing of the evolution of the tolerance to salinity in an inland aquatic lineage of water beetles (Enochrus species of the subgenus Lumetus, family Hydrophilidae), with the general aim of understanding the mechanisms by which it was achieved. Using a time-calibrated phylogeny built from five mitochondrial and two nuclear genes and information about the salinity tolerance and geographical distribution of the species, we found that salinity tolerance appeared multiple times associated with periods of global aridification. We found evidence of some accelerated transitions from freshwater directly to high salinities, as reconstructed with extant lineages. This, together with the strong positive correlation found between salinity tolerance and aridity of the habitats in which species are found, suggests that tolerance to salinity may be based on a co-opted mechanism developed originally for drought resistance. © 2013 John Wiley & Sons Ltd.

[Decompression problems in diving in mountain lakes].

PubMed

Bühlmann, A A

1989-08-01

The relationship between tolerated high-pressure tissue nitrogen and ambient pressure is practically linear. The tolerated nitrogen high pressure decreases at altitude, as the ambient pressure is lower. Additionally, tissues with short nitrogen half-times have a higher tolerance than tissues which retain nitrogen for longer duration. For the purpose of determining safe decompression routines, the human body can be regarded as consisting of 16 compartments with half-times from 4 to 635 minutes for nitrogen. The coefficients for calculation of the tolerated nitrogen-high pressure in the tissues can be deduced directly from the half-times for nitrogen. We show as application the results of 573 simulated air dives in the pressure-chamber and 544 real dives in mountain lakes in Switzerland (1400-2600 m above sea level) and in Lake Titicaca (3800 m above sea level). They are in accordance with the computed limits of tolerance.

Evaluating contribution of ionic, osmotic and oxidative stress components towards salinity tolerance in barley

PubMed Central

2014-01-01

Background Salinity tolerance is a physiologically multi-faceted trait attributed to multiple mechanisms. Three barley (Hordeum vulgare) varieties contrasting in their salinity tolerance were used to assess the relative contribution of ionic, osmotic and oxidative stress components towards overall salinity stress tolerance in this species, both at the whole-plant and cellular levels. In addition, transcriptional changes in the gene expression profile were studied for key genes mediating plant ionic and oxidative homeostasis (NHX; RBOH; SOD; AHA and GORK), to compare a contribution of transcriptional and post-translational factors towards the specific components of salinity tolerance. Results Our major findings are two-fold. First, plant tissue tolerance was a dominating component that has determined the overall plant responses to salinity, with root K+ retention ability and reduced sensitivity to stress-induced hydroxyl radical production being the main contributing tolerance mechanisms. Second, it was not possible to infer which cultivars were salinity tolerant based solely on expression profiling of candidate genes at one specific time point. For the genes studied and the time point selected that transcriptional changes in the expression of these specific genes had a small role for barley’s adaptive responses to salinity. Conclusions For better tissue tolerance, sodium sequestration, K+ retention and resistance to oxidative stress all appeared to be crucial. Because these traits are highly interrelated, it is suggested that a major progress in crop breeding for salinity tolerance can be achieved only if these complementary traits are targeted at the same time. This study also highlights the essentiality of post translational modifications in plant adaptive responses to salinity. PMID:24774965

Tolerance design of patient-specific range QA using the DMAIC framework in proton therapy.

PubMed

Rah, Jeong-Eun; Shin, Dongho; Manger, Ryan P; Kim, Tae Hyun; Oh, Do Hoon; Kim, Dae Yong; Kim, Gwe-Ya

2018-02-01

To implement the DMAIC (Define-Measure-Analyze-Improve-Control) can be used for customizing the patient-specific QA by designing site-specific range tolerances. The DMAIC framework (process flow diagram, cause and effect, Pareto chart, control chart, and capability analysis) were utilized to determine the steps that need focus for improving the patient-specific QA. The patient-specific range QA plans were selected according to seven treatment site groups, a total of 1437 cases. The process capability index, C pm was used to guide the tolerance design of patient site-specific range. For prostate field, our results suggested that the patient range measurements were capable at the current tolerance level of ±1 mm in clinical proton plans. For other site-specific ranges, we analyzed that the tolerance tends to be overdesigned to insufficient process capability calculated by the patient-specific QA data. The customized tolerances were calculated for treatment sites. Control charts were constructed to simulate the patient QA time before and after the new tolerances were implemented. It is found that the total simulation QA time was decreased on average of approximately 20% after establishing new site-specific range tolerances. We simulated the financial impact of this project. The QA failure for whole process in proton therapy would lead up to approximately 30% increase in total cost. DMAIC framework can be used to provide an effective QA by setting customized tolerances. When tolerance design is customized, the quality is reasonably balanced with time and cost demands. © 2017 American Association of Physicists in Medicine.

Fault tolerant architectures for integrated aircraft electronics systems, task 2

NASA Technical Reports Server (NTRS)

Levitt, K. N.; Melliar-Smith, P. M.; Schwartz, R. L.

1984-01-01

The architectural basis for an advanced fault tolerant on-board computer to succeed the current generation of fault tolerant computers is examined. The network error tolerant system architecture is studied with particular attention to intercluster configurations and communication protocols, and to refined reliability estimates. The diagnosis of faults, so that appropriate choices for reconfiguration can be made is discussed. The analysis relates particularly to the recognition of transient faults in a system with tasks at many levels of priority. The demand driven data-flow architecture, which appears to have possible application in fault tolerant systems is described and work investigating the feasibility of automatic generation of aircraft flight control programs from abstract specifications is reported.

Go out or stay in? The effects of zero tolerance laws on alcohol use and drinking and driving patterns among college students.

PubMed

Liang, Lan; Huang, Jidong

2008-11-01

Zero tolerance laws make it illegal per se for anyone under age 21 to drive with any measurable amount of blood alcohol. Although a link has been established between zero tolerance laws and lower motor vehicle fatalities, research has not produced strong evidence on how zero tolerance laws influence individual alcohol use and drinking and driving behaviors. Using a unique data set and a difference-in-difference-in-difference-type research design, we are able to analyze a number of pathways through which zero tolerance laws can work among an important underage population, college students. We find that zero tolerance laws reduce drinking and driving among college students. Further analysis of our detailed alcohol use measures suggests that zero tolerance laws are particularly effective at reducing the probability of driving after drinking for those who reported drinking away from home.

Full-Authority Fault-Tolerant Electronic Engine Control System for Variable Cycle Engines.

DTIC Science & Technology

1982-04-01

single internally self-checked VLSI micro - processor . The selected configuration is an externally checked pair of com- mercially available...Electronic Engine Control FPMH Failures per Million Hours FTMP Fault Tolerant Multi- Processor FTSC Fault Tolerant Spaceborn Computer GRAMP Generalized...Removal * MTBR Mean Time Between Repair MTTF Mean Time to Failure xiii List of Abbreviations (continued) - NH High Pressure Rotor Speed O&S Operating

A Fault Oblivious Extreme-Scale Execution Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKie, Jim

The FOX project, funded under the ASCR X-stack I program, developed systems software and runtime libraries for a new approach to the data and work distribution for massively parallel, fault oblivious application execution. Our work was motivated by the premise that exascale computing systems will provide a thousand-fold increase in parallelism and a proportional increase in failure rate relative to today’s machines. To deliver the capability of exascale hardware, the systems software must provide the infrastructure to support existing applications while simultaneously enabling efficient execution of new programming models that naturally express dynamic, adaptive, irregular computation; coupled simulations; and massivemore » data analysis in a highly unreliable hardware environment with billions of threads of execution. Our OS research has prototyped new methods to provide efficient resource sharing, synchronization, and protection in a many-core compute node. We have experimented with alternative task/dataflow programming models and shown scalability in some cases to hundreds of thousands of cores. Much of our software is in active development through open source projects. Concepts from FOX are being pursued in next generation exascale operating systems. Our OS work focused on adaptive, application tailored OS services optimized for multi → many core processors. We developed a new operating system NIX that supports role-based allocation of cores to processes which was released to open source. We contributed to the IBM FusedOS project, which promoted the concept of latency-optimized and throughput-optimized cores. We built a task queue library based on distributed, fault tolerant key-value store and identified scaling issues. A second fault tolerant task parallel library was developed, based on the Linda tuple space model, that used low level interconnect primitives for optimized communication. We designed fault tolerance mechanisms for task parallel computations employing work stealing for load balancing that scaled to the largest existing supercomputers. Finally, we implemented the Elastic Building Blocks runtime, a library to manage object-oriented distributed software components. To support the research, we won two INCITE awards for time on Intrepid (BG/P) and Mira (BG/Q). Much of our work has had impact in the OS and runtime community through the ASCR Exascale OS/R workshop and report, leading to the research agenda of the Exascale OS/R program. Our project was, however, also affected by attrition of multiple PIs. While the PIs continued to participate and offer guidance as time permitted, losing these key individuals was unfortunate both for the project and for the DOE HPC community.« less

Spinal interaction between the highly selective μ agonist DAMGO and several δ opioid receptor ligands in naive and morphine-tolerant mice.

PubMed

Szentirmay, A K; Király, K P; Lenkey, N; Lackó, E; Al-Khrasani, M; Friedmann, T; Timár, J; Gyarmati, S; Tóth, G; Fürst, S; Riba, P

2013-01-01

Since the discovery of opioid receptor dimers their possible roles in opioid actions were intensively investigated. Here we suggest a mechanism that may involve the μ-δ opioid heterodimers. The exact role of δ opioid receptors in antinociception and in the development of opioid tolerance is still unclear. While receptor up-regulation can be observed during the development of opioid tolerance no μ receptor down-regulation could be detected within five days. In our present work we investigated how the selective δ opioid receptor agonists and antagonists influence the antinociceptive effect of the selective μ receptor agonist DAMGO in naïve and morphine-tolerant mice. We treated male NMRI mice with 200 μmol/kg subcutaneous (s.c.) morphine twice daily for three days. On the fourth day we measured the antinociceptive effect of DAMGO alone and combined with delta ligands: DPDPE, deltorphin II (agonists), TIPP and TICPψ (antagonists), respectively, administered intrathecally (i.t.) in mouse tail-flick test. In naive control mice none of the δ ligands caused significant changes in the antinociceptive action of DAMGO. The treatment with s.c. morphine resulted in approximately four-fold tolerance to i.t. DAMGO, i.e. the ED₅₀ value of DAMGO was four times as high as in naive mice. 500 and 1000 pmol/mouse of the δ₁ selective agonist DPDPE enhanced the tolerance to DAMGO while 1000 pmol/mouse of the δ₂ selective agonist deltorphin II did not influence the degree of tolerance. However, both δ antagonists TIPP and TICPψ potentiated the antinociceptive effect of i.t. DAMGO, thus they restored the potency of DAMGO to the control level. The inhibitory action of DPDPE against the antinociceptive effect of DAMGO could be antagonized by TIPP and TICPψ. We hypothesize that during the development of morphine tolerance the formation of μδ heterodimers may contribute to the spinal opioid tolerance. δ ligands may affect the dimer formation differently. Those, like DPDPE may facilitate the dimer formation hence inhibit the antinociceptive effect of DAMGO by causing virtual μ receptor down-regulation. Ligands that do not affect the dimer formation do not influence antinociception either but ligands with the presumed capability of disconnecting the dimers may decrease the spinal tolerance to DAMGO. Copyright © 2012 Elsevier Inc. All rights reserved.

Multicast Delayed Authentication For Streaming Synchrophasor Data in the Smart Grid

PubMed Central

Câmara, Sérgio; Anand, Dhananjay; Pillitteri, Victoria; Carmo, Luiz

2017-01-01

Multicast authentication of synchrophasor data is challenging due to the design requirements of Smart Grid monitoring systems such as low security overhead, tolerance of lossy networks, time-criticality and high data rates. In this work, we propose inf -TESLA, Infinite Timed Efficient Stream Loss-tolerant Authentication, a multicast delayed authentication protocol for communication links used to stream synchrophasor data for wide area control of electric power networks. Our approach is based on the authentication protocol TESLA but is augmented to accommodate high frequency transmissions of unbounded length. inf TESLA protocol utilizes the Dual Offset Key Chains mechanism to reduce authentication delay and computational cost associated with key chain commitment. We provide a description of the mechanism using two different modes for disclosing keys and demonstrate its security against a man-in-the-middle attack attempt. We compare our approach against the TESLA protocol in a 2-day simulation scenario, showing a reduction of 15.82% and 47.29% in computational cost, sender and receiver respectively, and a cumulative reduction in the communication overhead. PMID:28736582

Multicast Delayed Authentication For Streaming Synchrophasor Data in the Smart Grid.

PubMed

Câmara, Sérgio; Anand, Dhananjay; Pillitteri, Victoria; Carmo, Luiz

2016-01-01

Multicast authentication of synchrophasor data is challenging due to the design requirements of Smart Grid monitoring systems such as low security overhead, tolerance of lossy networks, time-criticality and high data rates. In this work, we propose inf -TESLA, Infinite Timed Efficient Stream Loss-tolerant Authentication, a multicast delayed authentication protocol for communication links used to stream synchrophasor data for wide area control of electric power networks. Our approach is based on the authentication protocol TESLA but is augmented to accommodate high frequency transmissions of unbounded length. inf TESLA protocol utilizes the Dual Offset Key Chains mechanism to reduce authentication delay and computational cost associated with key chain commitment. We provide a description of the mechanism using two different modes for disclosing keys and demonstrate its security against a man-in-the-middle attack attempt. We compare our approach against the TESLA protocol in a 2-day simulation scenario, showing a reduction of 15.82% and 47.29% in computational cost, sender and receiver respectively, and a cumulative reduction in the communication overhead.

Evolution and mechanisms of plant tolerance to flooding stress

PubMed Central

Jackson, Michael B.; Ishizawa, Kimiharu; Ito, Osamu

2009-01-01

Background In recognition of the 200th anniversary of Charles Darwin's birth, this short article on flooding stress acknowledges not only Darwin's great contribution to the concept of evolution but also to the study of plant physiology. In modern biology, Darwin-inspired reductionist physiology continues to shed light on mechanisms that confer competitive advantage in many varied and challenging environments, including those where flooding is prevalent. Scope Mild flooding is experienced by most land plants but as its severity increases, fewer species are able to grow and survive. At the extreme, a highly exclusive aquatic lifestyle appears to have evolved numerous times over the past 120 million years. Although only 1–2% of angiosperms are aquatics, some of their adaptive characteristics are also seen in those adopting an amphibious lifestyle where flooding is less frequent. Lowland rice, the staple cereal for much of tropical Asia falls into this category. But, even amongst dry-land dwellers, or certain of their sub-populations, modest tolerance to occasional flooding is to be found, for example in wheat. The collection of papers summarized in this article describes advances to the understanding of mechanisms that explain flooding tolerance in aquatic, amphibious and dry-land plants. Work to develop more tolerant crops or manage flood-prone environments more effectively is also included. The experimental approaches range from molecular analyses, through biochemistry and metabolomics to whole-plant physiology, plant breeding and ecology. PMID:19145714

PRELIMINARY EVALUATION OF FeCrAl CLADDING AND U-Si FUEL FOR ACCIDENT TOLERANT FUEL CONCEPTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hales, J. D.; Gamble, K. A.

2015-09-01

Since the accident at the Fukushima Daiichi Nuclear Power Station, enhancing the accident tolerance of light water reactors (LWRs) has become an important research topic. In particular, the community is actively developing enhanced fuels and cladding for LWRs to improve safety in the event of accidents in the reactor or spent fuel pools. Fuels with enhanced accident tolerance are those that, in comparison with the standard UO2-zirconium alloy system, can tolerate loss of active cooling in the reactor core for a considerably longer time period during design-basis and beyond design-basis events while maintaining or improving the fuel performance during normalmore » operations and operational transients. This paper presents early work in developing thermal and mechanical models for two materials that may have promise: U-Si for fuel, and FeCrAl for cladding. These materials would not necessarily be used together in the same fuel system, but individually have promising characteristics. BISON, the finite element-based fuel performance code in development at Idaho National Laboratory, was used to compare results from normal operation conditions with Zr-4/UO2 behavior. In addition, sensitivity studies are presented for evaluating the relative importance of material parameters such as ductility and thermal conductivity in FeCrAl and U-Si in order to provide guidance on future experiments for these materials.« less

Identification of novel drought-tolerant-associated SNPs in common bean (Phaseolus vulgaris)

PubMed Central

Villordo-Pineda, Emiliano; González-Chavira, Mario M.; Giraldo-Carbajo, Patricia; Acosta-Gallegos, Jorge A.; Caballero-Pérez, Juan

2015-01-01

Common bean (Phaseolus vulgaris L.) is a leguminous in high demand for human nutrition and a very important agricultural product. Production of common bean is constrained by environmental stresses such as drought. Although conventional plant selection has been used to increase production yield and stress tolerance, drought tolerance selection based on phenotype is complicated by associated physiological, anatomical, cellular, biochemical, and molecular changes. These changes are modulated by differential gene expression. A common method to identify genes associated with phenotypes of interest is the characterization of Single Nucleotide Polymorphims (SNPs) to link them to specific functions. In this work, we selected two drought-tolerant parental lines from Mesoamerica, Pinto Villa, and Pinto Saltillo. The parental lines were used to generate a population of 282 families (F3:5) and characterized by 169 SNPs. We associated the segregation of the molecular markers in our population with phenotypes including flowering time, physiological maturity, reproductive period, plant, seed and total biomass, reuse index, seed yield, weight of 100 seeds, and harvest index in three cultivation cycles. We observed 83 SNPs with significant association (p < 0.0003 after Bonferroni correction) with our quantified phenotypes. Phenotypes most associated were days to flowering and seed biomass with 58 and 44 associated SNPs, respectively. Thirty-seven out of the 83 SNPs were annotated to a gene with a potential function related to drought tolerance or relevant molecular/biochemical functions. Some SNPs such as SNP28 and SNP128 are related to starch biosynthesis, a common osmotic protector; and SNP18 is related to proline biosynthesis, another well-known osmotic protector. PMID:26257755

Identification of novel drought-tolerant-associated SNPs in common bean (Phaseolus vulgaris).

PubMed

Villordo-Pineda, Emiliano; González-Chavira, Mario M; Giraldo-Carbajo, Patricia; Acosta-Gallegos, Jorge A; Caballero-Pérez, Juan

2015-01-01

Common bean (Phaseolus vulgaris L.) is a leguminous in high demand for human nutrition and a very important agricultural product. Production of common bean is constrained by environmental stresses such as drought. Although conventional plant selection has been used to increase production yield and stress tolerance, drought tolerance selection based on phenotype is complicated by associated physiological, anatomical, cellular, biochemical, and molecular changes. These changes are modulated by differential gene expression. A common method to identify genes associated with phenotypes of interest is the characterization of Single Nucleotide Polymorphims (SNPs) to link them to specific functions. In this work, we selected two drought-tolerant parental lines from Mesoamerica, Pinto Villa, and Pinto Saltillo. The parental lines were used to generate a population of 282 families (F3:5) and characterized by 169 SNPs. We associated the segregation of the molecular markers in our population with phenotypes including flowering time, physiological maturity, reproductive period, plant, seed and total biomass, reuse index, seed yield, weight of 100 seeds, and harvest index in three cultivation cycles. We observed 83 SNPs with significant association (p < 0.0003 after Bonferroni correction) with our quantified phenotypes. Phenotypes most associated were days to flowering and seed biomass with 58 and 44 associated SNPs, respectively. Thirty-seven out of the 83 SNPs were annotated to a gene with a potential function related to drought tolerance or relevant molecular/biochemical functions. Some SNPs such as SNP28 and SNP128 are related to starch biosynthesis, a common osmotic protector; and SNP18 is related to proline biosynthesis, another well-known osmotic protector.

Hand to Hand: Teaching Tolerance and Social Justice One Child at a Time

ERIC Educational Resources Information Center

Zakin, Andrea

2012-01-01

Tolerance connotes patience, forbearance, and impartiality, as well as open-mindedness. In early childhood, possessing tolerance would refer to children's burgeoning awareness of themselves in relation to others, and the capability to accept appearance and behavior different from one's own. But is teaching tolerance, additionally considered the…

40 CFR 180.1241 - Eucalyptus oil; exemption from the requirement of a tolerance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Eucalyptus oil; exemption from the... Exemptions From Tolerances § 180.1241 Eucalyptus oil; exemption from the requirement of a tolerance. Time-limited exemptions from the requirement of a tolerance are established for residues of eucalyptus oil on...

40 CFR 180.1241 - Eucalyptus oil; exemption from the requirement of a tolerance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Eucalyptus oil; exemption from the... Exemptions From Tolerances § 180.1241 Eucalyptus oil; exemption from the requirement of a tolerance. Time-limited exemptions from the requirement of a tolerance are established for residues of eucalyptus oil on...

40 CFR 180.1241 - Eucalyptus oil; exemption from the requirement of a tolerance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Eucalyptus oil; exemption from the... Exemptions From Tolerances § 180.1241 Eucalyptus oil; exemption from the requirement of a tolerance. Time-limited exemptions from the requirement of a tolerance are established for residues of eucalyptus oil on...

40 CFR 180.1241 - Eucalyptus oil; exemption from the requirement of a tolerance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Eucalyptus oil; exemption from the... Exemptions From Tolerances § 180.1241 Eucalyptus oil; exemption from the requirement of a tolerance. Time-limited exemptions from the requirement of a tolerance are established for residues of eucalyptus oil on...

40 CFR 180.1241 - Eucalyptus oil; exemption from the requirement of a tolerance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Eucalyptus oil; exemption from the... Exemptions From Tolerances § 180.1241 Eucalyptus oil; exemption from the requirement of a tolerance. Time-limited exemptions from the requirement of a tolerance are established for residues of eucalyptus oil on...

Influence of Very High Breathing Resistance on Exercise Tolerance, Part 1 - Dry Exercise

DTIC Science & Technology

2016-01-01

Influence of Very High Breathing Resistance on Exercise Tolerance, Part 1 – Dry Exercise Authors...Tolerance, Part 1 – Dry Exercise 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Warkander D...exercise (60% of peak O2 consumption) on a cycle ergometer on dry land at sea level. R was such that the work of breathing per volume (volume-averaged

Tolerance of Volume Control Noninvasive Ventilation in Subjects With Amyotrophic Lateral Sclerosis.

PubMed

Martínez, Daniel; Sancho, Jesús; Servera, Emilio; Marín, Julio

2015-12-01

Noninvasive ventilation (NIV) tolerance has been identified as an independent predictor of survival in amyotrophic lateral sclerosis (ALS). Volume control continuous mandatory ventilation (VC-CMV) NIV has been associated with poor tolerance. The aim of this study was to determine the tolerance of subjects with ALS to VC-CMV NIV. This was a prospective study involving subjects with ALS who were treated with VC-CMV NIV. Respiratory and functional parameters were recorded when the subjects began ventilatory support. NIV tolerance was evaluated after 3 months. Eighty-seven subjects with ALS were included. After 3 months, 80 subjects (92%) remained tolerant of NIV. Tolerant subjects presented greater survival (median 22.0 months, 95% CI 14.78-29.21) than intolerant subjects (median 6.0 months, 95% CI 0.86-11.13) (P = .03). The variables that best predicted NIV tolerance were mechanically assisted cough peak flow (P = .01) and percentage of time spent with SpO2 < 90% at night while on NIV (P = .03) CONCLUSIONS: VC-CMV NIV provides high rates of NIV tolerance in subjects with ALS. Mechanically assisted cough peak flow and percentage of time spent with SpO2 < 90% at night while using NIV are the 2 factors associated with tolerance of VC-CMV NIV in subjects with ALS. Copyright © 2015 by Daedalus Enterprises.

Differential expression of benzodiazepine anticonvulsant cross-tolerance according to time following flurazepam or diazepam treatment.

PubMed

Rosenberg, H C

1995-01-01

In previous studies in which the anti-pentylenetetrazol (PTZ) effect of benzodiazepines was used to measure tolerance, the results depended on the benzodiazepine used for chronic treatment as well as the benzodiazepine given acutely to test for tolerance. In this study, the time course of tolerance reversal was studied in rats given two treatments known to cause anticonvulsant tolerance, 1-week flurazepam (FZP), and 3-week diazepam (DZP). Neither treatment altered convulsive threshold for IV PTZ, but both treatments decreased the convulsive threshold for bicuculline. Withdrawing DZP, but not FZP, treatment resulted in a loss of body weight. Twelve hours after 1-week FZP treatment, all benzodiazepines were significantly less effective, showing tolerance. Forty-eight hours after the 1-week FZP treatment, tolerance was still observed with DZP, FZP, and zolpidem, but was no longer present with clonazepam or bretazenil. After the 3-week DZP treatment, rats were tolerant to all benzodiazepines tested at 12 h of withdrawal, but had lost tolerance to all the drugs except bretazenil by 48 h. The results suggest differences in the way these benzodiazepines interact with their receptors, allowing differential expression of tolerance, and that chronic DZP and FZP treatments affected interactions of the benzodiazepines with their receptors, but not in the same fashion.

Optical and mechanical tolerances in hybrid concentrated thermal-PV solar trough.

PubMed

Diaz, Liliana Ruiz; Cocilovo, Byron; Miles, Alexander; Pan, Wei; Blanche, Pierre-Alexandre; Norwood, Robert A

2018-05-14

Hybrid thermal-PV solar trough collectors combine concentrated photovoltaics and concentrated solar power technology to harvest and store solar energy. In this work, the optical and mechanical requirements for optimal efficiency are analyzed using non-sequential ray tracing techniques. The results are used to generate opto-mechanical tolerances that can be compared to those of traditional solar collectors. We also explore ideas on how to relieve tracking tolerances for single-axis solar collectors. The objective is to establish a basis for tolerances required for the fabrication and manufacturing of hybrid solar trough collectors.

Parameter-tolerant design of high contrast gratings

NASA Astrophysics Data System (ADS)

Chevallier, Christyves; Fressengeas, Nicolas; Jacquet, Joel; Almuneau, Guilhem; Laaroussi, Youness; Gauthier-Lafaye, Olivier; Cerutti, Laurent; Genty, Frédéric

2015-02-01

This work is devoted to the design of high contrast grating mirrors taking into account the technological constraints and tolerance of fabrication. First, a global optimization algorithm has been combined to a numerical analysis of grating structures (RCWA) to automatically design HCG mirrors. Then, the tolerances of the grating dimensions have been precisely studied to develop a robust optimization algorithm with which high contrast gratings, exhibiting not only a high efficiency but also large tolerance values, could be designed. Finally, several structures integrating previously designed HCGs has been simulated to validate and illustrate the interest of such gratings.

Cost and benefits design optimization model for fault tolerant flight control systems

NASA Technical Reports Server (NTRS)

Rose, J.

1982-01-01

Requirements and specifications for a method of optimizing the design of fault-tolerant flight control systems are provided. Algorithms that could be used for developing new and modifying existing computer programs are also provided, with recommendations for follow-on work.

Vegetable soybean tolerance to pyroxasulfone

USDA-ARS?s Scientific Manuscript database

If registered for use on vegetable soybean, pyroxasulfone would fill an important gap in weed management systems in the crop. In order to determine the potential crop injury risk of pyroxasulfone on vegetable soybean, the objective of this work was to quantify vegetable soybean tolerance to pyroxasu...

Multiple tolerances dilute the second order cooperative dilemma

NASA Astrophysics Data System (ADS)

Sui, Xiukai; Wu, Bin; Wang, Long

2017-12-01

A peer punisher directly imposes fines upon defectors at a cost to himself. It is one of the mechanisms promoting cooperation, which is ubiquitous in nature. Typically, it is assumed that a peer punisher punishes provided that there is one defector in the group. The threshold that triggers punishment, however, is not necessarily one. The larger the threshold is, the more tolerant the peer punisher is. We study the evolutionary dynamics of those diverse tolerant peer punishment strategies in public goods game. We find that, i) less tolerant punishers prevail over tolerant ones; ii) large group size could enhance punishment, in contrast with the case in the first-order cooperative dilemma. Our analytical results are based on weak selection limit and large population size, which are verified by simulations. Our work sheds light on how punishment of diverse tolerance evolves.

Developing sporophytes transition from an inducible to a constitutive ecological strategy of desiccation tolerance in the moss Aloina ambigua: effects of desiccation on fitness

PubMed Central

Stark, Lloyd R.; Brinda, John C.

2015-01-01

Background and Aims Two ecological strategies of desiccation tolerance exist in plants, constitutive and inducible. Because of difficulties in culturing sporophytes, very little is known about desiccation tolerance in this generation and how desiccation affects sexual fitness. Methods Cultured sporophytes and vegetative shoots from a single genotype of the moss Aloina ambigua raised in the laboratory were tested for their strategy of desiccation tolerance by desiccating the shoot–sporophyte complex and vegetative shoots at different intensities, and comparing outcomes with those of undried shoot–sporophyte complexes and vegetative shoots. By using a dehardened clonal line, the effects of field, age and genetic variance among plants were removed. Key Results The gametophyte and embryonic sporophyte were found to employ a predominantly inducible strategy of desiccation tolerance, while the post-embryonic sporophyte was found to employ a moderately constitutive strategy of desiccation tolerance. Further, desiccation reduced sporophyte fitness, as measured by sporophyte mass, seta length and capsule size. However, the effects of desiccation on sporophyte fitness were reduced if the stress occurred during embryonic development as opposed to postembryonic desiccation. Conclusions The effects of desiccation on dehardened sporophytes of a bryophyte are shown for the first time. The transition from one desiccation tolerance strategy to the other in a single structure or generation is shown for only the second time in plants and for the first time in bryophytes. Finding degrees of inducible strategies of desiccation tolerance in different life phases prompts the formulation of a continuum hypothesis of ecological desiccation tolerance in mosses, where desiccation tolerance is not an either/or phenomenon, but varies in degree along a gradient of ecological inducibility. PMID:25578378

Searching for “Defect-Tolerant” Photovoltaic Materials: Combined Theoretical and Experimental Screening

DOE PAGES

Brandt, Riley E.; Poindexter, Jeremy R.; Gorai, Prashun; ...

2017-05-09

Recently, we and others have proposed screening criteria for 'defect-tolerant' photovoltaic (PV) absorbers, identifying several classes of semiconducting compounds with electronic structures similar to those of hybrid lead-halide perovskites. In this work, we reflect on the accuracy and prospects of these new design criteria through a combined experimental and theoretical approach. We construct a model to extract photoluminescence lifetimes of six of these candidate PV absorbers, including four (InI, SbSI, SbSeI, and BiOI) for which time-resolved photoluminescence has not been previously reported. The lifetimes of all six candidate materials exceed 1 ns, a threshold for promising early stage PV devicemore » performance. However, there are variations between these materials, and none achieve lifetimes as high as those of the hybrid lead-halide perovskites, suggesting that the heuristics for defect-tolerant semiconductors are incomplete. Here, we explore this through first-principles point defect calculations and Shockley-Read-Hall recombination models to describe the variation between the measured materials. In light of these insights, we discuss the evolution of screening criteria for defect tolerance and high-performance PV materials.« less

High Performance and Cost-Effective Direct Methanol Fuel Cells: Fe-N-C Methanol-Tolerant Oxygen Reduction Reaction Catalysts.

PubMed

Sebastián, David; Serov, Alexey; Artyushkova, Kateryna; Gordon, Jonathan; Atanassov, Plamen; Aricò, Antonino S; Baglio, Vincenzo

2016-08-09

Direct methanol fuel cells (DMFCs) offer great advantages for the supply of power with high efficiency and large energy density. The search for a cost-effective, active, stable and methanol-tolerant catalyst for the oxygen reduction reaction (ORR) is still a great challenge. In this work, platinum group metal-free (PGM-free) catalysts based on Fe-N-C are investigated in acidic medium. Post-treatment of the catalyst improves the ORR activity compared with previously published PGM-free formulations and shows an excellent tolerance to the presence of methanol. The feasibility for application in DMFC under a wide range of operating conditions is demonstrated, with a maximum power density of approximately 50 mW cm(-2) and a negligible methanol crossover effect on the performance. A review of the most recent PGM-free cathode formulations for DMFC indicates that this formulation leads to the highest performance at a low membrane-electrode assembly (MEA) cost. Moreover, a 100 h durability test in DMFC shows suitable applicability, with a similar performance-time behavior compared to common MEAs based on Pt cathodes. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Preliminary work toward the development of a dimensional tolerance standard for rapid prototyping

NASA Technical Reports Server (NTRS)

Kennedy, W. J.

1996-01-01

Rapid prototyping is a new technology for building parts quickly from CAD models. It works by slicing a CAD model into layers, then by building a model of the part one layer at a time. Since most parts can be sliced, most parts can be modeled using rapid prototyping. The layers themselves are created in a number of different ways - by using a laser to cure a layer of an epoxy or a resin, by depositing a layer of plastic or wax upon a surface, by using a laser to sinter a layer of powder, or by using a laser to cut a layer of paper. Rapid prototyping (RP) is new, and a standard part for use in comparing dimensional tolerances has not yet been chosen and accepted by ASTM (the American Society for Testing Materials). Such a part is needed when RP is used to build parts for investment casting or for direct use. The objective of this project was to start the development of a standard part by using statistical techniques to choose the features of the part which show curl - the vertical deviation of a part from its intended horizontal plane.

Differential antioxidative responses to dehydration-induced oxidative stress in core set of foxtail millet cultivars [Setaria italica (L.)].

PubMed

Lata, Charu; Jha, Sarita; Dixit, Vivek; Sreenivasulu, Nese; Prasad, Manoj

2011-10-01

Foxtail millet (Setaria italica L.) known as a relatively drought-tolerant crop across the world is grown in arid and semi-arid regions. To the best of our knowledge, no systematic study on drought tolerance screening of foxtail millet germplasm being a drought-tolerant crop has been reported so far. To explore genetic diversity of drought-induced oxidative stress tolerance in foxtail millet, we employed lipid peroxidation measure to assess membrane integrity under stress as biochemical marker to screen 107 cultivars and classified the genotypes as highly tolerant, tolerant, sensitive, and highly sensitive. From this comprehensive screening, four cultivars showing differential response to dehydration tolerance were selected to understand the physiological and biochemical basis of tolerance mechanisms. The dehydration-tolerant cultivars (IC-403579 and Prasad) showed considerably lower levels of lipid peroxidation and electrolyte leakage as compared with dehydration-sensitive cultivars (IC-480117 and Lepakshi), indicating better cell membrane integrity in tolerant cultivars. Correspondingly, tolerant genotypes maintained higher activity of catalase (EC 1.11.1.6), ascorbate peroxidase (APX; EC 1.11.1.11), and glutathione reductase (GR; EC 1.6.4.2) across different time-course period of polyethylene glycol (PEG) treatments in comparison to sensitive ones. The above biochemical results were further validated through quantitative real-time PCR analysis of APX and GR, whose transcripts were substantially induced by PEG treatments in tolerant cultivars. These results suggest that tolerant cultivars possess wider array of antioxidant machinery with efficient ascorbate-glutathione pathway to cope with drought-induced oxidative stress.

Four days of simulated shift work reduces insulin sensitivity in humans.

PubMed

Bescos, R; Boden, M J; Jackson, M L; Trewin, A J; Marin, E C; Levinger, I; Garnham, A; Hiam, D S; Falcao-Tebas, F; Conte, F; Owens, J A; Kennaway, D J; McConell, G K

2018-06-01

The aim of this study was to investigate the effects of 4 consecutive simulated night shifts on glucose homeostasis, mitochondrial function and central and peripheral rhythmicities compared with a simulated day shift schedule. Seventeen healthy adults (8M:9F) matched for sleep, physical activity and dietary/fat intake participated in this study (night shift work n = 9; day shift work n = 8). Glucose tolerance and insulin sensitivity before and after 4 nights of shift work were measured by an intravenous glucose tolerance test and a hyperinsulinaemic euglycaemic clamp respectively. Muscles biopsies were obtained to determine insulin signalling and mitochondrial function. Central and peripheral rhythmicities were assessed by measuring salivary melatonin and expression of circadian genes from hair samples respectively. Fasting plasma glucose increased (4.4 ± 0.1 vs. 4.6 ± 0.1 mmol L -1 ; P = .001) and insulin sensitivity decreased (25 ± 7%, P < .05) following the night shift, with no changes following the day shift. Night shift work had no effect on skeletal muscle protein expression (PGC1α, UCP3, TFAM and mitochondria Complex II-V) or insulin-stimulated pAkt Ser473, pTBC1D4Ser318 and pTBC1D4Thr642. Importantly, the metabolic changes after simulated night shifts occurred despite no changes in the timing of melatonin rhythmicity or hair follicle cell clock gene expression across the wake period (Per3, Per1, Nr1d1 and Nr1d2). Only 4 days of simulated night shift work in healthy adults is sufficient to reduce insulin sensitivity which would be expected to increase the risk of T2D. © 2018 Scandinavian Physiological Society. Published by John Wiley & Sons Ltd.

Education for Toleration in an Era of Zero Tolerance School Policies: A Deweyan Analysis

ERIC Educational Resources Information Center

Rice, Suzanne

2009-01-01

Americans in U.S. Society find themselves at a historical juncture where schools are implementing zero tolerance policies and--at the same time--also trying to promote tolerance, typically across differences such as race, class, culture, ability, and religion. Both these efforts respond to deeply held and serious concerns. But depending on the…

SWAPDT: A method for Short-time Withering Assessment of Probability for Drought Tolerance in Camellia sinensis validated by targeted metabolomics.

PubMed

Nyarukowa, Christopher; Koech, Robert; Loots, Theodor; Apostolides, Zeno

2016-07-01

Climate change is causing droughts affecting crop production on a global scale. Classical breeding and selection strategies for drought-tolerant cultivars will help prevent crop losses. Plant breeders, for all crops, need a simple and reliable method to identify drought-tolerant cultivars, but such a method is missing. Plant metabolism is often disrupted by abiotic stress conditions. To survive drought, plants reconfigure their metabolic pathways. Studies have documented the importance of metabolic regulation, i.e. osmolyte accumulation such as polyols and sugars (mannitol, sorbitol); amino acids (proline) during drought. This study identified and quantified metabolites in drought tolerant and drought susceptible Camellia sinensis cultivars under wet and drought stress conditions. For analyses, GC-MS and LC-MS were employed for metabolomics analysis.%RWC results show how the two drought tolerant and two drought susceptible cultivars differed significantly (p≤0.05) from one another; the drought susceptible exhibited rapid water loss compared to the drought tolerant. There was a significant variation (p<0.05) in metabolite content (amino acid, sugars) between drought tolerant and drought susceptible tea cultivars after short-time withering conditions. These metabolite changes were similar to those seen in other plant species under drought conditions, thus validating this method. The Short-time Withering Assessment of Probability for Drought Tolerance (SWAPDT) method presented here provides an easy method to identify drought tolerant tea cultivars that will mitigate the effects of drought due to climate change on crop losses. Copyright © 2016. Published by Elsevier GmbH.

An argument for intolerance

PubMed Central

Catherwood, J.

2000-01-01

"Multiculturalism", "pluralism" and "tolerance" have become buzz words in applied ethics. While serious and well thought out work is going on in these areas, a misunderstanding of the importance of tolerance, and the difficulties raised by multicultural moral conflict seems common. In this paper I argue that intolerance of some cultural traditions is morally required, and suggest that the forging of a moral mono-culture is preferable to pluralism. Key Words: Pluralism • multicultural • tolerance • relativism PMID:11129841

The association between perceived distress tolerance and cannabis use problems, cannabis withdrawal symptoms, and self-efficacy for quitting cannabis: The explanatory role of pain-related affective distress.

PubMed

Manning, Kara; Rogers, Andrew H; Bakhshaie, Jafar; Hogan, Julianna B D; Buckner, Julia D; Ditre, Joseph W; Zvolensky, Michael J

2018-10-01

Rates of cannabis use and related problems continue to rise, ranking as the third most common substance use disorder in the United States, behind tobacco and alcohol use. Past work suggests that perceived distress tolerance is related to several clinically significant features of cannabis use (e.g., coping-oriented use). However, there has been little exploration of the mechanisms that may underlie relations between perceived distress tolerance and cannabis use problems, withdrawal severity, and self-efficacy for quitting. The current study sought to examine the experience of pain, which frequently co-occurs with cannabis use (Ashrafioun, Bohnert, Jannausch, & Ilgen, 2015), as an underlying factor in the relation between perceived distress tolerance and cannabis related problems among 203 current cannabis-using adults (29.2% female, M = 37.7 years, SD = 10.2, 63% African American). Results indicated that perceived distress tolerance via pain related affective distress significantly predicted the severity of cannabis use problems (Pm = 0.60), degree of cannabis withdrawal (Pm = 0.39), and lower self-efficacy for quitting cannabis (Pm = 0.36). Future work may usefully explore the role of pain-related affective distress as a mechanistic factor in the context of perceived distress tolerance-cannabis relations. Copyright © 2018 Elsevier Ltd. All rights reserved.

Inter-individual differences in sleep response to shift work in novice police officers - A prospective study.

PubMed

Lammers-van der Holst, Heidi M; Van Dongen, Hans P A; Drosopoulos, Spyridon; Kerkhof, Gerard A

2016-01-01

The aim of this longitudinal study on novice police officers was to investigate inter-individual differences in sleep response to shift work, and to identify potential baseline predictors thereof. A total of 42 subjects were assessed at baseline, prior to commencing shift work. They were re-assessed during three follow-up sessions within the first 2 years of shift work exposure after approximately 4, 12, and 20 months of rotating shift work. Wrist actigraphy and sleep logs were used to investigate nocturnal sleep at baseline and daytime sleep after night shifts during the follow-up sessions. Actigraphically estimated total sleep time and subjective sleep quality were analyzed as outcome variables, using mixed-effects analysis of variance. Systematic inter-individual differences were observed in the overall response of these outcome variables to shift work. In this sample, flexibility of sleeping habits and gender were found to be predictors of daytime total sleep time in the first 2 years of shift work exposure. Flexibility of sleeping habits and subjective quality of nighttime sleep prior to shift work were found to be predictors of subjective quality of daytime sleep. These results suggest that it may be possible to detect and even predict sleep deficiencies in response to shift work early on, which could be a basis for the development of individualized interventions to improve shift work tolerance.

Characterization of cold-associated microRNAs in the freeze-tolerant gall fly Eurosta solidaginis using high-throughput sequencing.

PubMed

Lyons, Pierre J; Govaere, Louise; Crapoulet, Nicolas; Storey, Kenneth B; Morin, Pier Jr

2016-12-01

Significant physiological and biochemical changes are observed in freeze-tolerant insects when confronted with cold temperatures. These insects have adapted to winter by retreating into a hypometabolic state of diapause and implementing cryoprotective mechanisms that allow them to survive whole body freezing. MicroRNAs (miRNAs), a family of short ribonucleic acids, are emerging as likely molecular players underlying the process of cold adaptation. Unfortunately, the data is sparse concerning the signature of miRNAs that are modulated following cold exposure in the freeze-tolerant goldenrod gall fly Eurosta solidaginis. Leveraging for the first time a next-generation sequencing approach, differentially expressed miRNAs were evaluated in 5°C and -15°C-exposed E. solidaginis larvae. Next-generation sequencing expression data was subsequently validated by qRT-PCR for selected miRNA targets. Results demonstrate 24 differentially expressed freeze-responsive miRNAs. Notable, miR-1-3p, a miRNA modulated at low temperature in another cold-hardy insect, and miR-14-3p, a miRNA associated with stress response in the fruit fly, were shown to be significantly up-regulated in -15°C-exposed larvae. Overall, this work identifies, for the first time in a high-throughput manner, differentially expressed miRNAs in cold-exposed E. solidaginis larvae and further clarifies an emerging signature of miRNAs modulated at low temperatures in cold-hardy insects. Copyright © 2016 Elsevier Inc. All rights reserved.

Root biomass response to foliar application of imazapyr for two imidazolinone tolerant alleles of sunflower (Helianthus annuus L.)

PubMed Central

Sala, Carlos A.; Bulos, Mariano; Altieri, Emiliano; Ramos, María Laura

2012-01-01

Imisun and CLPlus are two imidazolinone tolerance traits in sunflower (Helianthus annuus L.) determined by the expression of two alleles at the locus Ahasl1. Both traits differed in their tolerance level to imazapyr —a type of imidazolinone herbicide— when aboveground biomass is considered, but the concomitant herbicide effect over the root system has not been reported. The objective of this work was to quantify the root biomass response to increased doses of imazapyr in susceptible (ahasl1/ahasl1), Imisun (Ahasl1-1/Ahasl1-1) and CLPlus (Ahasl1-3/Ahasl1-3) homozygous sunflower genotypes. These materials were sprayed at the V2–V4 stage with increased doses of imazapyr (from 0 to 480 g active ingredient ha−1) and 14 days after treatment root biomass of each plant was assessed. Genotype at the Ahasl1 locus, dose of imazapyr and their interaction significantly contributed (P < 0.001) to explain the reduction in root biomass accumulation after herbicide application. Estimated dose of imazapyr required to reduce root biomass accumulation by fifty percent (GR50) differed statistically for the three genotypes under study (P < 0.001). CLPlus genotypes showed the highest values of GR50, 300 times higher on average than the susceptible genotypes, and almost 8 times higher than Imisun materials, demonstrating that both alleles differ in their root biomass response to foliar application of increased doses of imazapyr. PMID:23226083

Comparative study of Saccharomyces cerevisiae wine strains to identify potential marker genes correlated to desiccation stress tolerance.

PubMed

Capece, Angela; Votta, Sonia; Guaragnella, Nicoletta; Zambuto, Marianna; Romaniello, Rossana; Romano, Patrizia

2016-05-01

The most diffused formulation of starter for winemaking is active dry yeast (ADY). ADYs production process is essentially characterized by air-drying stress, a combination of several stresses, including thermal, hyperosmotic and oxidative and cell capacity to counteract such multiple stresses will determine its survival. The molecular mechanisms underlying cell stress response to desiccation have been mostly studied in laboratory and commercial yeast strains, but a growing interest is currently developing for indigenous yeast strains which represent a valuable and alternative source of genetic and molecular biodiversity to be exploited. In this work, a comparative study of different Saccharomyces cerevisiae indigenous wine strains, previously selected for their technological traits, has been carried out to identify potentially relevant genes involved in desiccation stress tolerance. Cell viability was evaluated along desiccation treatment and gene expression was analyzed by real-time PCR before and during the stress. Our data show that the observed differences in individual strain sensitivity to desiccation stress could be associated to specific gene expression over time. In particular, either the basal or the stress-induced mRNA levels of certain genes, such as HSP12, SSA3, TPS1, TPS2, CTT1 and SOD1, result tightly correlated to the strain survival advantage. This study provides a reliable and sensitive method to predict desiccation stress tolerance of indigenous wine yeast strains which could be preliminary to biotechnological applications. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Feasibility and Testing of Additive Manufactured Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dehoff, Ryan R.; Hummelt, Ed; Solovyeva, Lyudmila

2016-09-01

This project focused on demonstrating the ability to fabricate two parts with different geometry: an arc flash interrupter and a hydraulic manifold. Eaton Corporation provided ORNL solid models, information related to tolerances and sensitive parameters of the parts and provided testing and evaluation. ORNL successfully manufactured both components, provided cost models of the manufacturing (materials, labor, time and post processing) and delivered test components for Eaton evaluation. The arc flash suppressor was fabricated using the Renishaw laser powder bed technology in CoCrMo while the manifold was produced from Ti-6Al-4V using the Arcam electron beam melting technology. These manufacturing techniques weremore » selected based on the design and geometrical tolerances required. A full-scale manifold was produced on the Arcam A2 system (nearly 12 inches tall). A portion of the manifold was also produced in the Arcam Q10 system. Although a full scale manifold could not be produced in the system, a full scale manifold is expected to have similar material properties, geometric accuracy, and surface finish as could be fabricated on an Arcam Q20 system that is capable of producing four full scale manifolds in a production environment. In addition to the manifold, mechanical test specimens, geometric tolerance artifacts, and microstructure samples were produced alongside the manifold. The development and demonstration of these two key components helped Eaton understand the impact additive manufacturing can have on many of their existing products. By working within the MDF and leveraging ORNL’s manufacturing and characterization capabilities, the work will ensure the rapid insertion and commercialization of this technology.« less

Lemna minor tolerance to metal-working fluid residues: implications for rhizoremediation.

PubMed

Grijalbo, L; Becerril, J M; Barrutia, O; Gutierrez-Mañero, J; Lucas Garcia, J A

2016-07-01

For the first time in the literature, duckweed (Lemna minor) tolerance (alone or in combination with a consortium of bacteria) to spent metal-working fluid (MWF) was assessed, together with its capacity to reduce the chemical oxygen demand (COD) of this residue. In a preliminary study, L. minor response to pre-treated MWF residue (ptMWF) and vacuum-distilled MWF water (MWFw) was tested. Plants were able to grow in both residues at different COD levels tested (up to 2300 mg·l(-1) ), showing few toxicity symptoms (mainly growth inhibition). Plant response to MWFw was more regular and dose responsive than when exposed to ptMWF. Moreover, COD reduction was less significant in ptMWF. Thus, based on these preliminary results, a second study was conducted using MWFw to test the effectiveness of inoculation with a bacterial consortium isolated from a membrane bioreactor fed with the same residue. After 5 days of exposure, COD in solutions containing inoculated plants was significantly lower than in non-inoculated ones. Moreover, inoculation reduced β+γ-tocopherol levels in MWFw-exposed plants, suggesting pollutant imposed stress was reduced. We therefore conclude from that L. minor is highly tolerant to spent MWF residues and that this species can be very useful, together with the appropriate bacterial consortium, in reducing COD of this residue under local legislation limits and thus minimise its potential environmental impact. Interestingly, the lipophilic antioxidant tocopherol (especially the sum of β+γ isomers) proved to be an effective plant biomarker of pollution. © 2016 German Botanical Society and The Royal Botanical Society of the Netherlands.

The role of ROS signaling in cross-tolerance: from model to crop

PubMed Central

Perez, Ilse Barrios; Brown, Patrick J.

2014-01-01

Reactive oxygen species (ROS) are key signaling molecules produced in response to biotic and abiotic stresses that trigger a variety of plant defense responses. Cross-tolerance, the enhanced ability of a plant to tolerate multiple stresses, has been suggested to result partly from overlap between ROS signaling mechanisms. Cross-tolerance can manifest itself both as a positive genetic correlation between tolerance to different stresses (inherent cross-tolerance), and as the priming of systemic plant tolerance through previous exposure to another type of stress (induced cross-tolerance). Research in model organisms suggests that cross-tolerance could be used to benefit the agronomy and breeding of crop plants. However, research under field conditions has been scarce and critical issues including the timing, duration, and intensity of a stressor, as well as its interactions with other biotic and abiotic factors, remain to be addressed. Potential applications include the use of chemical stressors to screen for stress-resistant genotypes in breeding programs and the agronomic use of chemical inducers of plant defense for plant protection. Success of these applications will rely on improving our understanding of how ROS signals travel systemically and persist over time, and of how genetic correlations between resistance to ROS, biotic, and abiotic stresses are shaped by cooperative and antagonistic interactions within the underlying signaling pathways. PMID:25566313

The negative effect of starvation and the positive effect of mild thermal stress on thermal tolerance of the red flour beetle, Tribolium castaneum

NASA Astrophysics Data System (ADS)

Scharf, Inon; Wexler, Yonatan; MacMillan, Heath Andrew; Presman, Shira; Simson, Eddie; Rosenstein, Shai

2016-04-01

The thermal tolerance of a terrestrial insect species can vary as a result of differences in population origin, developmental stage, age, and sex, as well as via phenotypic plasticity induced in response to changes in the abiotic environment. Here, we studied the effects of both starvation and mild cold and heat shocks on the thermal tolerance of the red flour beetle, Tribolium castaneum. Starvation led to impaired cold tolerance, measured as chill coma recovery time, and this effect, which was stronger in males than females, persisted for longer than 2 days but less than 7 days. Heat tolerance, measured as heat knockdown time, was not affected by starvation. Our results highlight the difficulty faced by insects when encountering multiple stressors simultaneously and indicate physiological trade-offs. Both mild cold and heat shocks led to improved heat tolerance in both sexes. It could be that both mild shocks lead to the expression of heat shock proteins, enhancing heat tolerance in the short run. Cold tolerance was not affected by previous mild cold shock, suggesting that such a cold shock, as a single event, causes little stress and hence elicits only weak physiological reaction. However, previous mild heat stress led to improved cold tolerance but only in males. Our results point to both hardening and cross-tolerance between cold and heat shocks.

Making real-time reactive systems reliable

NASA Technical Reports Server (NTRS)

Marzullo, Keith; Wood, Mark

1990-01-01

A reactive system is characterized by a control program that interacts with an environment (or controlled program). The control program monitors the environment and reacts to significant events by sending commands to the environment. This structure is quite general. Not only are most embedded real time systems reactive systems, but so are monitoring and debugging systems and distributed application management systems. Since reactive systems are usually long running and may control physical equipment, fault tolerance is vital. The research tries to understand the principal issues of fault tolerance in real time reactive systems and to build tools that allow a programmer to design reliable, real time reactive systems. In order to make real time reactive systems reliable, several issues must be addressed: (1) How can a control program be built to tolerate failures of sensors and actuators. To achieve this, a methodology was developed for transforming a control program that references physical value into one that tolerates sensors that can fail and can return inaccurate values; (2) How can the real time reactive system be built to tolerate failures of the control program. Towards this goal, whether the techniques presented can be extended to real time reactive systems is investigated; and (3) How can the environment be specified in a way that is useful for writing a control program. Towards this goal, whether a system with real time constraints can be expressed as an equivalent system without such constraints is also investigated.

Genetic dissection of acetic acid tolerance in Saccharomyces cerevisiae.

PubMed

Geng, Peng; Xiao, Yin; Hu, Yun; Sun, Haiye; Xue, Wei; Zhang, Liang; Shi, Gui-Yang

2016-09-01

Dissection of the hereditary architecture underlying Saccharomyces cerevisiae tolerance to acetic acid is essential for ethanol fermentation. In this work, a genomics approach was used to dissect hereditary variations in acetic acid tolerance between two phenotypically different strains. A total of 160 segregants derived from these two strains were obtained. Phenotypic analysis indicated that the acetic acid tolerance displayed a normal distribution in these segregants, and suggested that the acetic acid tolerant traits were controlled by multiple quantitative trait loci (QTLs). Thus, 220 SSR markers covering the whole genome were used to detect QTLs of acetic acid tolerant traits. As a result, three QTLs were located on chromosomes 9, 12, and 16, respectively, which explained 38.8-65.9 % of the range of phenotypic variation. Furthermore, twelve genes of the candidates fell into the three QTL regions by integrating the QTL analysis with candidates of acetic acid tolerant genes. These results provided a novel avenue to obtain more robust strains.

Tolerance-based punishment in continuous public goods game

NASA Astrophysics Data System (ADS)

Gao, Jia; Li, Zhi; Cong, Rui; Wang, Long

2012-08-01

Altruistic punishment for defectors is considered as a key motive for the explanation of cooperation. However, there is no clear border between the cooperative and defective behaviors in a continuous strategy game. We propose a model to study the effect of punishment on the evolution of cooperation in continuous public goods game, wherein individuals have the traits to punish the co-players based on social tolerance. We show that a reasonable punishment with a uniform tolerance can spur individuals to make more investments. Additionally, for a fixed punishment cost and a fixed fine, a moderate value of tolerance can result in the best promotion of cooperation. Furthermore, we investigate the coevolutionary dynamics of investment and tolerance. We find that the population splits into two branches: high-tolerance individuals who make high investments and low-tolerance individuals who make low investments. A dynamic equilibrium is achieved between these two types of individuals. Our work extends punishment to continuous cooperative behaviors and the results may enhance the understanding of altruistic punishment in the evolution of human cooperation.

The Perils of Repressive Tolerance in Music Education Curriculum

ERIC Educational Resources Information Center

Perrine, William M.

2017-01-01

In recent years, philosophers of music education have called for a greater degree of political engagement by music education practitioners. Using Marcuse's discussion of "repressive tolerance" as a conceptual framework, I argue that a politicized curriculum in music education works against the liberal ideas of free speech and a free…

The Relationship between Tolerance of Ambiguity and Stereotyping: Implications for BSW Education

ERIC Educational Resources Information Center

Valutis, Stephanie A.

2015-01-01

Ambiguity tolerance and intolerance can influence one's professional practice. The study of such influences remains sparse within the social work literature. Behaviors that reduce uncertainty, including categorizing or stereotyping, are used by those who feel discomfort in ambiguous situations. This study explores explore the relationship between…

48 CFR 822.304 - Variations, tolerances, and exemptions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and Safety Standards Act 822.304 Variations, tolerances, and exemptions. When issuing a contract for nursing home care, a contracting officer may exempt a contractor from certain requirements of the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708) regarding the payment of overtime (see 29 CFR...

48 CFR 822.304 - Variations, tolerances, and exemptions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... and Safety Standards Act 822.304 Variations, tolerances, and exemptions. When issuing a contract for nursing home care, a contracting officer may exempt a contractor from certain requirements of the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708) regarding the payment of overtime (see 29 CFR...

Molecular breeding for developing drought tolerant and disease resistant maize in sub Saharan Africa

USDA-ARS?s Scientific Manuscript database

The International Maize and Wheat Improvement Center (CIMMYT), in collaboration with public and private partners, is working on developing and disseminating drought tolerant maize for sub Saharan Africa (SSA) using pedigree selection and molecular breeding. In this paper, we provide an overview of ...

Comparative genome analysis of a thermotolerant Escherichia coli obtained by Genome Replication Engineering Assisted Continuous Evolution (GREACE) and its parent strain provides new understanding of microbial heat tolerance.

PubMed

Luan, Guodong; Bao, Guanhui; Lin, Zhao; Li, Yang; Chen, Zugen; Li, Yin; Cai, Zhen

2015-12-25

Heat tolerance of microbes is of great importance for efficient biorefinery and bioconversion. However, engineering and understanding of microbial heat tolerance are difficult and insufficient because it is a complex physiological trait which probably correlates with all gene functions, genetic regulations, and cellular metabolisms and activities. In this work, a novel strain engineering approach named Genome Replication Engineering Assisted Continuous Evolution (GREACE) was employed to improve the heat tolerance of Escherichia coli. When the E. coli strain carrying a mutator was cultivated under gradually increasing temperature, genome-wide mutations were continuously generated during genome replication and the mutated strains with improved thermotolerance were autonomously selected. A thermotolerant strain HR50 capable of growing at 50°C on LB agar plate was obtained within two months, demonstrating the efficiency of GREACE in improving such a complex physiological trait. To understand the improved heat tolerance, genomes of HR50 and its wildtype strain DH5α were sequenced. Evenly distributed 361 mutations covering all mutation types were found in HR50. Closed material transportations, loose genome conformation, and possibly altered cell wall structure and transcription pattern were the main differences of HR50 compared with DH5α, which were speculated to be responsible for the improved heat tolerance. This work not only expanding our understanding of microbial heat tolerance, but also emphasizing that the in vivo continuous genome mutagenesis method, GREACE, is efficient in improving microbial complex physiological trait. Copyright © 2015 Elsevier B.V. All rights reserved.

Comparative Analysis of Disruption Tolerant Network Routing Simulations in the One and NS-3

DTIC Science & Technology

2017-12-01

real systems with less work compared to ns-2. In order to meet the design goals of ns-3, the entire code structure changed to a modular design . As a...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS COMPARATIVE ANALYSIS OF DISRUPTION TOLERANT NETWORK ROUTING SIMULATIONS IN THE ONE AND NS-3...Thesis 03-23-2016 to 12-15-2017 4. TITLE AND SUBTITLE COMPARATIVE ANALYSIS OF DISRUPTION TOLERANT NETWORK ROUTING SIMULATIONS IN THE ONE AND NS-3 5

Tolerance response of multidrug-resistant Salmonella enterica strains to habituation to Origanum vulgare L. essential oil

PubMed Central

Monte, Daniel F. M.; Tavares, Adassa G.; Albuquerque, Allan R.; Sampaio, Fábio C.; Oliveira, Tereza C. R. M.; Franco, Octavio L.; Souza, Evandro L.; Magnani, Marciane

2014-01-01

Multidrug-resistant Salmonella enterica isolates from human outbreaks or from poultry origin were investigated for their ability to develop direct-tolerance or cross-tolerance to sodium chloride, potassium chloride, lactic acid, acetic acid, and ciprofloxacin after habituation in subinhibitory amounts ( of the minimum inhibitory concentration – (MIC) and of the minimum inhibitory concentration – MIC) of Origanum vulgare L. essential oil (OVEO) at different time intervals. The habituation of S. enterica to OVEO did not induce direct-tolerance or cross-tolerance in the tested strains, as assessed by the modulation of MIC values. However, cells habituated to OVEO maintained or increased susceptibility to the tested antimicrobials agents, with up to fourfold double dilution decrease from previously determined MIC values. This study reports for the first time the non-inductive effect of OVEO on the acquisition of direct-tolerance or cross-tolerance in multidrug-resistant S. enterica strains to antimicrobial agents that are largely used in food preservation, as well as to CIP, the therapeutic drug of salmonellosis. PMID:25566231

Distress Tolerance and Psychopathological Symptoms and Disorders: A Review of the Empirical Literature among Adults

PubMed Central

Leyro, Teresa M.; Zvolensky, Michael J.; Bernstein, Amit

2010-01-01

In the present paper, we review theory and empirical study of distress tolerance, an emerging risk factor candidate for various forms of psychopathology. Despite the long-standing interest in, and promise of work on, distress tolerance for understanding adult psychopathology, there has not been a comprehensive review of the extant empirical literature focused on the construct. As a result, a comprehensive synthesis of theoretical and empirical scholarship on distress tolerance including integration of extant research on the relations between distress tolerance and psychopathology is lacking. Inspection of the scientific literature indicates that there are a number of promising ways to conceptualize and measure distress tolerance, as well as documented relations between distress tolerance factor(s) and psychopathological symptoms and disorders. Although promising, there also is notable conceptual and operational heterogeneity across the distress tolerance literature(s). Moreoever, a number of basic questions remain unanswered regarding the associations between distress tolerance and other risk and protective factors and processes, as well as its putative role(s) in vulnerability for, and resilience to, psychopathology. Thus, the current paper provides a comprehensive review of past and contemporary theory and research and proposes key areas for future empirical study of this construct. PMID:20565169

Heavy metal tolerance in plants: A model evolutionary system.

PubMed

Macnair, M R

1987-12-01

Evolved tolerance to toxic concentrations of heavy metals in plants inhabiting spoil heaps of mines is a well known phenomenon that has been the subject of much research in the last two decades. These plants are useful models for studying processes involved in the early stages of the speciation of edaphic endemics. Recent work has revealed the importance of several phenomena in the differentiation of tolerant populations, including natural selection, founder effects and 'hitch-hiking', and has demonstrated the early evolution of morphological differentiation and reproductive isolating mechanisms. Further studies of the biochemistry and molecular biology of heavy metal tolerance will help to show why some plant groups, such as Agrostis, are far more prone to evolve tolerance than others. Copyright © 1987. Published by Elsevier Ltd.

Expression pattern of salt tolerance-related genes in Aegilops cylindrica.

PubMed

Arabbeigi, Mahbube; Arzani, Ahmad; Majidi, Mohammad Mahdi; Sayed-Tabatabaei, Badraldin Ebrahim; Saha, Prasenjit

2018-02-01

Aegilops cylindrica , a salt-tolerant gene pool of wheat, is a useful plant model for understanding mechanism of salt tolerance. A salt-tolerant USL26 and a salt-sensitive K44 genotypes of A. cylindrica , originating from Uremia Salt Lake shores in Northwest Iran and a non-saline Kurdestan province in West Iran, respectively, were identified based on screening evaluation and used for this work. The objective of the current study was to investigate the expression patterns of four genes related to ion homeostasis in this species. Under treatment of 400 mM NaCl, USL26 showed significantly higher root and shoot dry matter levels and K + concentrations, together with lower Na + concentrations than K44 genotype. A. cylindrica HKT1;5 ( AecHKT1;5 ), SOS1 ( AecSOS1 ), NHX1 ( AecNHX1 ) and VP1 ( AecVP1 ) were partially sequenced to design each gene specific primer. Quantitative real-time PCR showed a differential expression pattern of these genes between the two genotypes and between the root and shoot tissues. Expressions of AecHKT1;5 and AecSOS1 was greater in the roots than in the shoots of USL26 while AecNHX1 and AecVP1 were equally expressed in both tissues of USL26 and K44. The higher transcripts of AecHKT1;5 in the roots versus the shoots could explain both the lower Na + in the shoots and the much lower Na + and higher K + concentrations in the roots/shoots of USL26 compared to K44. Therefore, the involvement of AecHKT1;5 in shoot-to-root handover of Na + in possible combination with the exclusion of excessive Na + from the root in the salt-tolerant genotype are suggested.

Combining inhibitor tolerance and D-xylose fermentation in industrial Saccharomyces cerevisiae for efficient lignocellulose-based bioethanol production.

PubMed

Demeke, Mekonnen M; Dumortier, Françoise; Li, Yingying; Broeckx, Tom; Foulquié-Moreno, María R; Thevelein, Johan M

2013-08-26

In addition to efficient pentose utilization, high inhibitor tolerance is a key trait required in any organism used for economically viable industrial bioethanol production with lignocellulose biomass. Although recent work has succeeded in establishing efficient xylose fermentation in robust industrial Saccharomyces cerevisiae strains, the resulting strains still lacked sufficient inhibitor tolerance for efficient sugar fermentation in lignocellulose hydrolysates. The aim of the present work was to combine high xylose fermentation activity and high inhibitor tolerance in a single industrial yeast strain. We have screened 580 yeast strains for high inhibitor tolerance using undetoxified acid-pretreated spruce hydrolysate and identified a triploid industrial baker's yeast strain as having the highest inhibitor tolerance. From this strain, a mating competent diploid segregant with even higher inhibitor tolerance was obtained. It was crossed with the recently developed D-xylose fermenting diploid industrial strain GS1.11-26, with the Ethanol Red genetic background. Screening of 819 diploid segregants from the tetraploid hybrid resulted in two strains, GSF335 and GSF767, combining high inhibitor tolerance and efficient xylose fermentation. In a parallel approach, meiotic recombination of GS1.11-26 with a haploid segregant of Ethanol Red and screening of 104 segregants resulted in a similar inhibitor tolerant diploid strain, GSE16. The three superior strains exhibited significantly improved tolerance to inhibitors in spruce hydrolysate, higher glucose consumption rates, higher aerobic growth rates and higher maximal ethanol accumulation capacity in very-high gravity fermentation, compared to GS1.11-26. In complex medium, the D-xylose utilization rate by the three superior strains ranged from 0.36 to 0.67 g/g DW/h, which was lower than that of GS1.11-26 (1.10 g/g DW/h). On the other hand, in batch fermentation of undetoxified acid-pretreated spruce hydrolysate, the three superior strains showed comparable D-xylose utilization rates as GS1.11-26, probably because of their higher inhibitor tolerance. They produced up to 23% more ethanol compared to Ethanol Red. We have successfully constructed three superior industrial S. cerevisiae strains that combine efficient D-xylose utilization with high inhibitor tolerance. Since the background strain Ethanol Red has a proven record of successful industrial application, the three new superior strains have strong potential for direct application in industrial bioethanol production.

Combining inhibitor tolerance and D-xylose fermentation in industrial Saccharomyces cerevisiae for efficient lignocellulose-based bioethanol production

PubMed Central

2013-01-01

Background In addition to efficient pentose utilization, high inhibitor tolerance is a key trait required in any organism used for economically viable industrial bioethanol production with lignocellulose biomass. Although recent work has succeeded in establishing efficient xylose fermentation in robust industrial Saccharomyces cerevisiae strains, the resulting strains still lacked sufficient inhibitor tolerance for efficient sugar fermentation in lignocellulose hydrolysates. The aim of the present work was to combine high xylose fermentation activity and high inhibitor tolerance in a single industrial yeast strain. Results We have screened 580 yeast strains for high inhibitor tolerance using undetoxified acid-pretreated spruce hydrolysate and identified a triploid industrial baker’s yeast strain as having the highest inhibitor tolerance. From this strain, a mating competent diploid segregant with even higher inhibitor tolerance was obtained. It was crossed with the recently developed D-xylose fermenting diploid industrial strain GS1.11-26, with the Ethanol Red genetic background. Screening of 819 diploid segregants from the tetraploid hybrid resulted in two strains, GSF335 and GSF767, combining high inhibitor tolerance and efficient xylose fermentation. In a parallel approach, meiotic recombination of GS1.11-26 with a haploid segregant of Ethanol Red and screening of 104 segregants resulted in a similar inhibitor tolerant diploid strain, GSE16. The three superior strains exhibited significantly improved tolerance to inhibitors in spruce hydrolysate, higher glucose consumption rates, higher aerobic growth rates and higher maximal ethanol accumulation capacity in very-high gravity fermentation, compared to GS1.11-26. In complex medium, the D-xylose utilization rate by the three superior strains ranged from 0.36 to 0.67 g/g DW/h, which was lower than that of GS1.11-26 (1.10 g/g DW/h). On the other hand, in batch fermentation of undetoxified acid-pretreated spruce hydrolysate, the three superior strains showed comparable D-xylose utilization rates as GS1.11-26, probably because of their higher inhibitor tolerance. They produced up to 23% more ethanol compared to Ethanol Red. Conclusions We have successfully constructed three superior industrial S. cerevisiae strains that combine efficient D-xylose utilization with high inhibitor tolerance. Since the background strain Ethanol Red has a proven record of successful industrial application, the three new superior strains have strong potential for direct application in industrial bioethanol production. PMID:23971950

Analog assessment of frustration tolerance: association with self-reported child abuse risk and physiological reactivity.

PubMed

Rodriguez, Christina M; Russa, Mary Bower; Kircher, John C

2015-08-01

Although frustration has long been implicated in promoting aggression, the potential for poor frustration tolerance to function as a risk factor for physical child abuse risk has received minimal attention. Instead, much of the extant literature has examined the role of anger in physical abuse risk, relying on self-reports of the experience or expression of anger, despite the fact that this methodology is often acknowledged as vulnerable to bias. Therefore, the present investigation examined whether a more implicit, analog assessment of frustration tolerance specifically relevant to parenting would reveal an association with various markers of elevated physical child abuse risk in a series of samples that varied with regard to age, parenting status, and abuse risk. An analog task was designed to evoke parenting-relevant frustration: the task involved completing an unsolvable task while listening to a crying baby or a toddler's temper tantrum; time scores were generated to gauge participants' persistence in the task when encountering such frustration. Across these studies, low frustration tolerance was associated with increased physical child abuse potential, greater use of parent-child aggression in discipline encounters, dysfunctional disciplinary style, support for physical discipline use and physical discipline escalation, and increased heart rate. Future research directions that could better inform intervention and prevention programs are discussed, including working to clarify the processes underlying frustration intolerance and potential interactive influences that may exacerbate physical child abuse. Copyright © 2015 Elsevier Ltd. All rights reserved.

Temperature-Related Death and Illness. Chapter 2

NASA Technical Reports Server (NTRS)

Sarofim, Marcus C.; Saha, Shubhayu; Hawkins, Michelle D.; Mills, David M.; Hess, Jeremy; Horton, Radley; Kinney, Patrick; Schwartz, Joel; St. Juliana, Alexis

2016-01-01

Based on present-day sensitivity to heat, an increase of thousands to tens of thousands of premature heat-related deaths in the summer and a decrease of premature cold-related deaths in the winter are projected each year as a result of climate change by the end of the century. Future adaptation will very likely reduce these impacts (see Changing Tolerance to Extreme Heat Finding). The reduction in cold-related deaths is projected to be smaller than the increase in heat-related deaths in most regions. Days that are hotter than usual in the summer or colder than usual in the winter are both associated with increased illness and death. Mortality effects are observed even for small differences from seasonal average temperatures. Because small temperature differences occur much more frequently than large temperature differences, not accounting for the effect of these small differences would lead to underestimating the future impact of climate change. An increase in population tolerance to extreme heat has been observed over time. Changes in this tolerance have been associated with increased use of air conditioning, improved social responses, and or physiological acclimatization, among other factors. Expected future increases in this tolerance will reduce the projected increase in deaths from heat. Older adults and children have a higher risk of dying or becoming ill due to extreme heat. People working outdoors, the socially isolated and economically disadvantaged, those with chronic illnesses, as well as some communities of color, are also especially vulnerable to death or illness.

Comparative Polygenic Analysis of Maximal Ethanol Accumulation Capacity and Tolerance to High Ethanol Levels of Cell Proliferation in Yeast

PubMed Central

Pais, Thiago M.; Foulquié-Moreno, María R.; Hubmann, Georg; Duitama, Jorge; Swinnen, Steve; Goovaerts, Annelies; Yang, Yudi; Dumortier, Françoise; Thevelein, Johan M.

2013-01-01

The yeast Saccharomyces cerevisiae is able to accumulate ≥17% ethanol (v/v) by fermentation in the absence of cell proliferation. The genetic basis of this unique capacity is unknown. Up to now, all research has focused on tolerance of yeast cell proliferation to high ethanol levels. Comparison of maximal ethanol accumulation capacity and ethanol tolerance of cell proliferation in 68 yeast strains showed a poor correlation, but higher ethanol tolerance of cell proliferation clearly increased the likelihood of superior maximal ethanol accumulation capacity. We have applied pooled-segregant whole-genome sequence analysis to identify the polygenic basis of these two complex traits using segregants from a cross of a haploid derivative of the sake strain CBS1585 and the lab strain BY. From a total of 301 segregants, 22 superior segregants accumulating ≥17% ethanol in small-scale fermentations and 32 superior segregants growing in the presence of 18% ethanol, were separately pooled and sequenced. Plotting SNP variant frequency against chromosomal position revealed eleven and eight Quantitative Trait Loci (QTLs) for the two traits, respectively, and showed that the genetic basis of the two traits is partially different. Fine-mapping and Reciprocal Hemizygosity Analysis identified ADE1, URA3, and KIN3, encoding a protein kinase involved in DNA damage repair, as specific causative genes for maximal ethanol accumulation capacity. These genes, as well as the previously identified MKT1 gene, were not linked in this genetic background to tolerance of cell proliferation to high ethanol levels. The superior KIN3 allele contained two SNPs, which are absent in all yeast strains sequenced up to now. This work provides the first insight in the genetic basis of maximal ethanol accumulation capacity in yeast and reveals for the first time the importance of DNA damage repair in yeast ethanol tolerance. PMID:23754966

Genome-wide association mapping of frost tolerance in barley (Hordeum vulgare L.)

PubMed Central

2013-01-01

Background Frost tolerance is a key trait with economic and agronomic importance in barley because it is a major component of winter hardiness, and therefore limits the geographical distribution of the crop and the effective transfer of quality traits between spring and winter crop types. Three main frost tolerance QTL (Fr-H1, Fr-H2 and Fr-H3) have been identified from bi-parental genetic mapping but it can be argued that those mapping populations only capture a portion of the genetic diversity of the species. A genetically broad dataset consisting of 184 genotypes, representative of the barley gene pool cultivated in the Mediterranean basin over an extended time period, was genotyped with 1536 SNP markers. Frost tolerance phenotype scores were collected from two trial sites, Foradada (Spain) and Fiorenzuola (Italy) and combined with the genotypic data in genome wide association analyses (GWAS) using Eigenstrat and kinship approaches to account for population structure. Results GWAS analyses identified twelve and seven positive SNP associations at Foradada and Fiorenzuola, respectively, using Eigenstrat and six and four, respectively, using kinship. Linkage disequilibrium analyses of the significant SNP associations showed they are genetically independent. In the kinship analysis, two of the significant SNP associations were tightly linked to the Fr-H2 and HvBmy loci on chromosomes 5H and 4HL, respectively. The other significant kinship associations were located in genomic regions that have not previously been associated with cold stress. Conclusions Haplotype analysis revealed that most of the significant SNP loci are fixed in the winter or facultative types, while they are freely segregating within the un-adapted spring barley genepool. Although there is a major interest in detecting new variation to improve frost tolerance of available winter and facultative types, from a GWAS perspective, working within the un-adapted spring germplasm pool is an attractive alternative strategy which would minimize statistical issues, simplify the interpretation of the data and identify phenology independent genetic determinants of frost tolerance. PMID:23802597

Pregnant at work: time for prenatal care providers to act.

PubMed

Karkowsky, Chavi Eve; Morris, Liz

2016-09-01

Fifty years ago, when a woman became pregnant, she was expected to stop working. Today, however, most women who work are the primary, sole, or co-breadwinner for their families, and their earnings during pregnancy are often essential to their families' economic well-being. Medical data about working during pregnancy are sparse but generally show that both low-risk and high-risk women can tolerate work-related duties well, although some work accommodations (eg, providing a chair for sitting, allowing snacks, or modifying the work schedule) may be necessary. However, some employers refuse to accommodate pregnant women who need adjustments. This can result in a woman being forced to make the choice between working without accommodations and losing her income and health insurance or even her job. Prenatal care providers can play an important role by implementing changes in their own practice, shaping public policy, and conducting research to increase protections for pregnant women and to ensure that they receive medically recommended accommodations while continuing to earn income for their growing families. Copyright © 2016 Elsevier Inc. All rights reserved.

ROBUS-2: A Fault-Tolerant Broadcast Communication System

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo; Malekpour, Mahyar R.; Miner, Paul S.

2005-01-01

The Reliable Optical Bus (ROBUS) is the core communication system of the Scalable Processor-Independent Design for Enhanced Reliability (SPIDER), a general-purpose fault-tolerant integrated modular architecture currently under development at NASA Langley Research Center. The ROBUS is a time-division multiple access (TDMA) broadcast communication system with medium access control by means of time-indexed communication schedule. ROBUS-2 is a developmental version of the ROBUS providing guaranteed fault-tolerant services to the attached processing elements (PEs), in the presence of a bounded number of faults. These services include message broadcast (Byzantine Agreement), dynamic communication schedule update, clock synchronization, and distributed diagnosis (group membership). The ROBUS also features fault-tolerant startup and restart capabilities. ROBUS-2 is tolerant to internal as well as PE faults, and incorporates a dynamic self-reconfiguration capability driven by the internal diagnostic system. This version of the ROBUS is intended for laboratory experimentation and demonstrations of the capability to reintegrate failed nodes, dynamically update the communication schedule, and tolerate and recover from correlated transient faults.

Paradoxical effects of density on measurement of copper tolerance in Silene paradoxa L.

PubMed

Capuana, Maurizio; Colzi, Ilaria; Buccianti, Antonella; Coppi, Andrea; Palm, Emily; Del Bubba, Massimo; Gonnelli, Cristina

2018-01-01

This work investigated if the assessment of tolerance to trace metals can depend on plant density in the experimental design. A non-metallicolous and a metallicolous populations of Silene paradoxa were hydroponically cultivated at increasing density and in both the absence (-Cu conditions) and excess of copper (+Cu conditions). In -Cu conditions, the metallicolous population showed a lower susceptibility to plant density in comparison to the non-metallicolous one, explained by a higher capacity of the metallicolous population to exploit resources. In +Cu conditions, an alleviating effect of increasing density was found in roots. Such effect was present to a greater extent in the non-metallicolous population, thus making the populations equally copper-tolerant at the highest density used. In shoots, an additive effect of increasing plant density to copper toxicity was reported. Its higher intensity in the metallicolous population reverted the copper tolerance relationship at the highest plant densities used. In both populations, a density-induced decrease in root copper accumulation was observed, thus concurring to the reported mitigation in +Cu conditions. Our work revealed the importance of density studies on the optimization of eco-toxicological bioassays and of metal tolerance assessment and it can be considered the first example of an alleviating effect of increasing plant number on copper stress in a metallophyte.

Energy-efficient fault tolerance in multiprocessor real-time systems

NASA Astrophysics Data System (ADS)

Guo, Yifeng

The recent progress in the multiprocessor/multicore systems has important implications for real-time system design and operation. From vehicle navigation to space applications as well as industrial control systems, the trend is to deploy multiple processors in real-time systems: systems with 4 -- 8 processors are common, and it is expected that many-core systems with dozens of processing cores will be available in near future. For such systems, in addition to general temporal requirement common for all real-time systems, two additional operational objectives are seen as critical: energy efficiency and fault tolerance. An intriguing dimension of the problem is that energy efficiency and fault tolerance are typically conflicting objectives, due to the fact that tolerating faults (e.g., permanent/transient) often requires extra resources with high energy consumption potential. In this dissertation, various techniques for energy-efficient fault tolerance in multiprocessor real-time systems have been investigated. First, the Reliability-Aware Power Management (RAPM) framework, which can preserve the system reliability with respect to transient faults when Dynamic Voltage Scaling (DVS) is applied for energy savings, is extended to support parallel real-time applications with precedence constraints. Next, the traditional Standby-Sparing (SS) technique for dual processor systems, which takes both transient and permanent faults into consideration while saving energy, is generalized to support multiprocessor systems with arbitrary number of identical processors. Observing the inefficient usage of slack time in the SS technique, a Preference-Oriented Scheduling Framework is designed to address the problem where tasks are given preferences for being executed as soon as possible (ASAP) or as late as possible (ALAP). A preference-oriented earliest deadline (POED) scheduler is proposed and its application in multiprocessor systems for energy-efficient fault tolerance is investigated, where tasks' main copies are executed ASAP while backup copies ALAP to reduce the overlapped execution of main and backup copies of the same task and thus reduce energy consumption. All proposed techniques are evaluated through extensive simulations and compared with other state-of-the-art approaches. The simulation results confirm that the proposed schemes can preserve the system reliability while still achieving substantial energy savings. Finally, for both SS and POED based Energy-Efficient Fault-Tolerant (EEFT) schemes, a series of recovery strategies are designed when more than one (transient and permanent) faults need to be tolerated.

Multiscale Multiphysics Developments for Accident Tolerant Fuel Concepts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamble, K. A.; Hales, J. D.; Yu, J.

2015-09-01

U 3Si 2 and iron-chromium-aluminum (Fe-Cr-Al) alloys are two of many proposed accident-tolerant fuel concepts for the fuel and cladding, respectively. The behavior of these materials under normal operating and accident reactor conditions is not well known. As part of the Department of Energy’s Accident Tolerant Fuel High Impact Problem program significant work has been conducted to investigate the U 3Si 2 and FeCrAl behavior under reactor conditions. This report presents the multiscale and multiphysics effort completed in fiscal year 2015. The report is split into four major categories including Density Functional Theory Developments, Molecular Dynamics Developments, Mesoscale Developments, andmore » Engineering Scale Developments. The work shown here is a compilation of a collaborative effort between Idaho National Laboratory, Los Alamos National Laboratory, Argonne National Laboratory and Anatech Corp.« less

Personality Change as a Function of Voluteer Experience in a Psychiatric Hospital

ERIC Educational Resources Information Center

King, Mark; And Others

1970-01-01

Members of an undergraduate course in psychology (n equals 416) were tested for moral tolerance and self acceptance before and after course completion. Sixteen students did concurrent hospital work. The volunteer experience did not significantly affect moral tolerance scores, but did result in greater self acceptance scores. (Author/CJ)

Calculation of Retention Time Tolerance Windows with Absolute Confidence from Shared Liquid Chromatographic Retention Data

PubMed Central

Boswell, Paul G.; Abate-Pella, Daniel; Hewitt, Joshua T.

2015-01-01

Compound identification by liquid chromatography-mass spectrometry (LC-MS) is a tedious process, mainly because authentic standards must be run on a user’s system to be able to confidently reject a potential identity from its retention time and mass spectral properties. Instead, it would be preferable to use shared retention time/index data to narrow down the identity, but shared data cannot be used to reject candidates with an absolute level of confidence because the data are strongly affected by differences between HPLC systems and experimental conditions. However, a technique called “retention projection” was recently shown to account for many of the differences. In this manuscript, we discuss an approach to calculate appropriate retention time tolerance windows for projected retention times, potentially making it possible to exclude candidates with an absolute level of confidence, without needing to have authentic standards of each candidate on hand. In a range of multi-segment gradients and flow rates run among seven different labs, the new approach calculated tolerance windows that were significantly more appropriate for each retention projection than global tolerance windows calculated for retention projections or linear retention indices. Though there were still some small differences between the labs that evidently were not taken into account, the calculated tolerance windows only needed to be relaxed by 50% to make them appropriate for all labs. Even then, 42% of the tolerance windows calculated in this study without standards were narrower than those required by WADA for positive identification, where standards must be run contemporaneously. PMID:26292624

Calculation of retention time tolerance windows with absolute confidence from shared liquid chromatographic retention data.

PubMed

Boswell, Paul G; Abate-Pella, Daniel; Hewitt, Joshua T

2015-09-18

Compound identification by liquid chromatography-mass spectrometry (LC-MS) is a tedious process, mainly because authentic standards must be run on a user's system to be able to confidently reject a potential identity from its retention time and mass spectral properties. Instead, it would be preferable to use shared retention time/index data to narrow down the identity, but shared data cannot be used to reject candidates with an absolute level of confidence because the data are strongly affected by differences between HPLC systems and experimental conditions. However, a technique called "retention projection" was recently shown to account for many of the differences. In this manuscript, we discuss an approach to calculate appropriate retention time tolerance windows for projected retention times, potentially making it possible to exclude candidates with an absolute level of confidence, without needing to have authentic standards of each candidate on hand. In a range of multi-segment gradients and flow rates run among seven different labs, the new approach calculated tolerance windows that were significantly more appropriate for each retention projection than global tolerance windows calculated for retention projections or linear retention indices. Though there were still some small differences between the labs that evidently were not taken into account, the calculated tolerance windows only needed to be relaxed by 50% to make them appropriate for all labs. Even then, 42% of the tolerance windows calculated in this study without standards were narrower than those required by WADA for positive identification, where standards must be run contemporaneously. Copyright © 2015 Elsevier B.V. All rights reserved.

Using Performance Tools to Support Experiments in HPC Resilience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naughton, III, Thomas J; Boehm, Swen; Engelmann, Christian

2014-01-01

The high performance computing (HPC) community is working to address fault tolerance and resilience concerns for current and future large scale computing platforms. This is driving enhancements in the programming environ- ments, specifically research on enhancing message passing libraries to support fault tolerant computing capabilities. The community has also recognized that tools for resilience experimentation are greatly lacking. However, we argue that there are several parallels between performance tools and resilience tools . As such, we believe the rich set of HPC performance-focused tools can be extended (repurposed) to benefit the resilience community. In this paper, we describe the initialmore » motivation to leverage standard HPC per- formance analysis techniques to aid in developing diagnostic tools to assist fault tolerance experiments for HPC applications. These diagnosis procedures help to provide context for the system when the errors (failures) occurred. We describe our initial work in leveraging an MPI performance trace tool to assist in provid- ing global context during fault injection experiments. Such tools will assist the HPC resilience community as they extend existing and new application codes to support fault tolerances.« less

Active Fault Tolerant Control for Ultrasonic Piezoelectric Motor

NASA Astrophysics Data System (ADS)

Boukhnifer, Moussa

2012-07-01

Ultrasonic piezoelectric motor technology is an important system component in integrated mechatronics devices working on extreme operating conditions. Due to these constraints, robustness and performance of the control interfaces should be taken into account in the motor design. In this paper, we apply a new architecture for a fault tolerant control using Youla parameterization for an ultrasonic piezoelectric motor. The distinguished feature of proposed controller architecture is that it shows structurally how the controller design for performance and robustness may be done separately which has the potential to overcome the conflict between performance and robustness in the traditional feedback framework. A fault tolerant control architecture includes two parts: one part for performance and the other part for robustness. The controller design works in such a way that the feedback control system will be solely controlled by the proportional plus double-integral PI2 performance controller for a nominal model without disturbances and H∞ robustification controller will only be activated in the presence of the uncertainties or an external disturbances. The simulation results demonstrate the effectiveness of the proposed fault tolerant control architecture.

Water-soluble metal working fluids additives derived from the esters of acid anhydrides with higher alcohols for aluminum alloy materials.

PubMed

Yamamoto, Syutaro; Tomoda, Hideyuki; Watanabe, Shoji

2007-01-01

Water-soluble metal working fluids are used for processing of aluminum alloy materials. This short article describes properties of new additives in water-soluble metal working fluids for aluminum alloy materials. Many half esters or diesters were prepared from the reactions of higher alcohols with acid anhydrides. Interestingly, diesters of PTMG (tetrahydrofuran oligomer, MW = 650 and 1000) and polybutylene oxide (MW = 650) with maleic anhydride and succinic anhydride showed both of an excellent anti-corrosion property for aluminum alloy and a good hard water tolerance. The industrial soluble type processing oils including these additives also showed anti-corrosion property and hard water tolerance.

Flooding tolerance in interspecific introgression lines containing chromosome segments from teosinte (Zea nicaraguensis) in maize (Zea mays subsp. mays).

PubMed

Mano, Y; Omori, F

2013-10-01

Nicaraguan teosinte (Zea nicaraguensis), a species found in frequently flooded areas, provides useful germplasm for breeding flooding-tolerant maize (Z. mays subsp. mays). The objective of this study was to select flooding-tolerant lines using a library of introgression lines (ILs), each containing a chromosome segment from Z. nicaraguensis in the maize inbred line Mi29. To produce the ILs, a single F1 plant derived from a cross between maize Mi29 and Z. nicaraguensis was backcrossed to Mi29 three times, self-pollinated four times and genotyped using simple sequence repeat markers. Flooding tolerance was evaluated at the seedling stage under reducing soil conditions. By backcrossing and selfing, a series of 45 ILs were developed covering nearly the entire maize genome. Five flooding-tolerant lines were identified from among the ILs by evaluating leaf injury. Among these, line IL#18, containing a Z. nicaraguensis chromosome segment on the long arm of chromosome 4, showed the greatest tolerance to flooding, suggesting the presence of a major quantitative trait locus (QTL) in that region. The presence of the QTL was verified by examining flooding tolerance in a population segregating for the candidate region of chromosome 4. There was no significant relationship between the capacity to form constitutive aerenchyma and flooding tolerance in the ILs, indicating the presence of other factors related to flooding tolerance under reducing soil conditions. A flooding-tolerant genotype, IL#18, was identified; this genotype should be useful for maize breeding. In addition, because the chromosome segments of Z. nicaraguensis in the ILs cover nearly the entire genome and Z. nicaraguensis possesses several unique traits related to flooding tolerance, the ILs should be valuable material for additional QTL detection and the development of flooding-tolerant maize lines.

Developing sporophytes transition from an inducible to a constitutive ecological strategy of desiccation tolerance in the moss Aloina ambigua: effects of desiccation on fitness.

PubMed

Stark, Lloyd R; Brinda, John C

2015-03-01

Two ecological strategies of desiccation tolerance exist in plants, constitutive and inducible. Because of difficulties in culturing sporophytes, very little is known about desiccation tolerance in this generation and how desiccation affects sexual fitness. Cultured sporophytes and vegetative shoots from a single genotype of the moss Aloina ambigua raised in the laboratory were tested for their strategy of desiccation tolerance by desiccating the shoot-sporophyte complex and vegetative shoots at different intensities, and comparing outcomes with those of undried shoot-sporophyte complexes and vegetative shoots. By using a dehardened clonal line, the effects of field, age and genetic variance among plants were removed. The gametophyte and embryonic sporophyte were found to employ a predominantly inducible strategy of desiccation tolerance, while the post-embryonic sporophyte was found to employ a moderately constitutive strategy of desiccation tolerance. Further, desiccation reduced sporophyte fitness, as measured by sporophyte mass, seta length and capsule size. However, the effects of desiccation on sporophyte fitness were reduced if the stress occurred during embryonic development as opposed to postembryonic desiccation. The effects of desiccation on dehardened sporophytes of a bryophyte are shown for the first time. The transition from one desiccation tolerance strategy to the other in a single structure or generation is shown for only the second time in plants and for the first time in bryophytes. Finding degrees of inducible strategies of desiccation tolerance in different life phases prompts the formulation of a continuum hypothesis of ecological desiccation tolerance in mosses, where desiccation tolerance is not an either/or phenomenon, but varies in degree along a gradient of ecological inducibility. © The Author 2015. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

An image retrieval framework for real-time endoscopic image retargeting.

PubMed

Ye, Menglong; Johns, Edward; Walter, Benjamin; Meining, Alexander; Yang, Guang-Zhong

2017-08-01

Serial endoscopic examinations of a patient are important for early diagnosis of malignancies in the gastrointestinal tract. However, retargeting for optical biopsy is challenging due to extensive tissue variations between examinations, requiring the method to be tolerant to these changes whilst enabling real-time retargeting. This work presents an image retrieval framework for inter-examination retargeting. We propose both a novel image descriptor tolerant of long-term tissue changes and a novel descriptor matching method in real time. The descriptor is based on histograms generated from regional intensity comparisons over multiple scales, offering stability over long-term appearance changes at the higher levels, whilst remaining discriminative at the lower levels. The matching method then learns a hashing function using random forests, to compress the string and allow for fast image comparison by a simple Hamming distance metric. A dataset that contains 13 in vivo gastrointestinal videos was collected from six patients, representing serial examinations of each patient, which includes videos captured with significant time intervals. Precision-recall for retargeting shows that our new descriptor outperforms a number of alternative descriptors, whilst our hashing method outperforms a number of alternative hashing approaches. We have proposed a novel framework for optical biopsy in serial endoscopic examinations. A new descriptor, combined with a novel hashing method, achieves state-of-the-art retargeting, with validation on in vivo videos from six patients. Real-time performance also allows for practical integration without disturbing the existing clinical workflow.

Formal design and verification of a reliable computing platform for real-time control. Phase 2: Results

NASA Technical Reports Server (NTRS)

Butler, Ricky W.; Divito, Ben L.

1992-01-01

The design and formal verification of the Reliable Computing Platform (RCP), a fault tolerant computing system for digital flight control applications is presented. The RCP uses N-Multiply Redundant (NMR) style redundancy to mask faults and internal majority voting to flush the effects of transient faults. The system is formally specified and verified using the Ehdm verification system. A major goal of this work is to provide the system with significant capability to withstand the effects of High Intensity Radiated Fields (HIRF).

Modulation of motor performance and motor learning by transcranial direct current stimulation.

PubMed

Reis, Janine; Fritsch, Brita

2011-12-01

Transcranial direct current stimulation (tDCS) has shown preliminary success in improving motor performance and motor learning in healthy individuals, and restitution of motor deficits in stroke patients. This brief review highlights some recent work. Within the past years, behavioural studies have confirmed and specified the timing and polarity specific effects of tDCS on motor skill learning and motor adaptation. There is strong evidence that timely co-application of (hand/arm) training and anodal tDCS to the contralateral M1 can improve motor learning. Improvements in motor function as measured by clinical scores have been described for combined tDCS and training in stroke patients. For this purpose, electrode montages have been modified with respect to interhemispheric imbalance after brain injury. Cathodal tDCS applied to the unlesioned M1 or bihemispheric M1 stimulation appears to be well tolerated and useful to induce improvements in motor function. Mechanistic studies in humans and animals are discussed with regard to physiological motor learning. tDCS is well tolerated, easy to use and capable of inducing lasting improvements in motor function. This method holds promise for the rehabilitation of motor disabilities, although acute studies in patients with brain injury are so far lacking.

The control of acute diarrhea in a large industrial plant.

PubMed

Martins, J K; Roedl, G

1978-04-01

Diarrhea causes considerable absenteeism and loss of working time among employees in the United States. One hundred employees with acute diarrhea at a Ford Motor Company plant were studied for four months to determine if loperamide hydrochloride treatment would control diarrheal symptoms, reduce absenteeism due to the condition, and be well-tolerated. Diarrhea was controlled with a median dosage of three capsules (6 mg total dose) and a range of two to 12 capsules. Ninety-six percent of the subjects were controlled after the first day, 98% by the third day. A statistically significant number were symptom free at their last clinical visits. Side effects were generally minor in nature. Substantially more than 1,000 man-hours of lost time were saved because of the treatment. Known drug dependents did not suffer from CNS effects or "highs". Loperamide acts directly on the intestinal wall to inhibit excessive peristalsis, thereby providing prompt, effective relief, with normal bowel patterns observed in these patients. The simple, individualized dosage is patient-oriented, rather than based on a fixed regimen. Because of its rapid onset of action, effective control of symptoms, low dosage, and being well-tolerated, loperamide meets the criteria for an effective antidiarrheal agent in industry.

Adjoint Techniques for Topology Optimization of Structures Under Damage Conditions

NASA Technical Reports Server (NTRS)

Akgun, Mehmet A.; Haftka, Raphael T.

2000-01-01

The objective of this cooperative agreement was to seek computationally efficient ways to optimize aerospace structures subject to damage tolerance criteria. Optimization was to involve sizing as well as topology optimization. The work was done in collaboration with Steve Scotti, Chauncey Wu and Joanne Walsh at the NASA Langley Research Center. Computation of constraint sensitivity is normally the most time-consuming step of an optimization procedure. The cooperative work first focused on this issue and implemented the adjoint method of sensitivity computation (Haftka and Gurdal, 1992) in an optimization code (runstream) written in Engineering Analysis Language (EAL). The method was implemented both for bar and plate elements including buckling sensitivity for the latter. Lumping of constraints was investigated as a means to reduce the computational cost. Adjoint sensitivity computation was developed and implemented for lumped stress and buckling constraints. Cost of the direct method and the adjoint method was compared for various structures with and without lumping. The results were reported in two papers (Akgun et al., 1998a and 1999). It is desirable to optimize topology of an aerospace structure subject to a large number of damage scenarios so that a damage tolerant structure is obtained. Including damage scenarios in the design procedure is critical in order to avoid large mass penalties at later stages (Haftka et al., 1983). A common method for topology optimization is that of compliance minimization (Bendsoe, 1995) which has not been used for damage tolerant design. In the present work, topology optimization is treated as a conventional problem aiming to minimize the weight subject to stress constraints. Multiple damage configurations (scenarios) are considered. Each configuration has its own structural stiffness matrix and, normally, requires factoring of the matrix and solution of the system of equations. Damage that is expected to be tolerated is local and represents a small change in the stiffness matrix compared to the baseline (undamaged) structure. The exact solution to a slightly modified set of equations can be obtained from the baseline solution economically without actually solving the modified system.. Shennan-Morrison-Woodbury (SMW) formulas are matrix update formulas that allow this (Akgun et al., 1998b). SMW formulas were therefore used here to compute adjoint displacements for sensitivity computation and structural displacements in damaged configurations.

Measuring the RC time constant with Arduino

NASA Astrophysics Data System (ADS)

Pereira, N. S. A.

2016-11-01

In this work we use the Arduino UNO R3 open source hardware platform to assemble an experimental apparatus for the measurement of the time constant of an RC circuit. With adequate programming, the Arduino is used as a signal generator, a data acquisition system and a basic signal visualisation tool. Theoretical calculations are compared with direct observations from an analogue oscilloscope. Data processing and curve fitting is performed on a spreadsheet. The results obtained for the six RC test circuits are within the expected interval of values defined by the tolerance of the components. The hardware and software prove to be adequate to the proposed measurements and therefore adaptable to a laboratorial teaching and learning context.

A method of setting limits for the purpose of quality assurance

NASA Astrophysics Data System (ADS)

Sanghangthum, Taweap; Suriyapee, Sivalee; Kim, Gwe-Ya; Pawlicki, Todd

2013-10-01

The result from any assurance measurement needs to be checked against some limits for acceptability. There are two types of limits; those that define clinical acceptability (action limits) and those that are meant to serve as a warning that the measurement is close to the action limits (tolerance limits). Currently, there is no standard procedure to set these limits. In this work, we propose an operational procedure to set tolerance limits and action limits. The approach to establish the limits is based on techniques of quality engineering using control charts and a process capability index. The method is different for tolerance limits and action limits with action limits being categorized into those that are specified and unspecified. The procedure is to first ensure process control using the I-MR control charts. Then, the tolerance limits are set equal to the control chart limits on the I chart. Action limits are determined using the Cpm process capability index with the requirements that the process must be in-control. The limits from the proposed procedure are compared to an existing or conventional method. Four examples are investigated: two of volumetric modulated arc therapy (VMAT) point dose quality assurance (QA) and two of routine linear accelerator output QA. The tolerance limits range from about 6% larger to 9% smaller than conventional action limits for VMAT QA cases. For the linac output QA, tolerance limits are about 60% smaller than conventional action limits. The operational procedure describe in this work is based on established quality management tools and will provide a systematic guide to set up tolerance and action limits for different equipment and processes.

Different-Level Simultaneous Minimization Scheme for Fault Tolerance of Redundant Manipulator Aided with Discrete-Time Recurrent Neural Network

PubMed Central

Jin, Long; Liao, Bolin; Liu, Mei; Xiao, Lin; Guo, Dongsheng; Yan, Xiaogang

2017-01-01

By incorporating the physical constraints in joint space, a different-level simultaneous minimization scheme, which takes both the robot kinematics and robot dynamics into account, is presented and investigated for fault-tolerant motion planning of redundant manipulator in this paper. The scheme is reformulated as a quadratic program (QP) with equality and bound constraints, which is then solved by a discrete-time recurrent neural network. Simulative verifications based on a six-link planar redundant robot manipulator substantiate the efficacy and accuracy of the presented acceleration fault-tolerant scheme, the resultant QP and the corresponding discrete-time recurrent neural network. PMID:28955217

Adjustment of gripping force by optical systems

NASA Astrophysics Data System (ADS)

Jalba, C. K.; Barz, C.

2018-01-01

With increasing automation, robotics also requires ever more intelligent solutions in the handling of various tasks. In this context, many grippers must also be re-designed. For this, they must always be adapted for different requirements. The equipment of the gripper systems with sensors should help to make the gripping process more intelligent. In order to achieve such objectives, optical systems can also be used. This work analyzes how the gripping force can be adjusted by means of an optical recognition. The result of this work is the creation of a connection between optical recognition, tolerances, gripping force and real-time control. In this way, algorithms can be created, with the aid of which robot grippers as well as other gripping systems become more intelligent.

7 CFR 51.307 - Application of tolerances.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS) United States Standards for Grades of Apples Application of Tolerances § 51.307 Application of... least one apple which is seriously damaged by insects or affected by decay or internal breakdown may be... have more than 3 times the tolerance specified, except that at least three defective apples may be...

7 CFR 51.307 - Application of tolerances.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS) United States Standards for Grades of Apples Application of Tolerances § 51.307 Application of... least one apple which is seriously damaged by insects or affected by decay or internal breakdown may be... have more than 3 times the tolerance specified, except that at least three defective apples may be...

7 CFR 51.307 - Application of tolerances.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS) United States Standards for Grades of Apples Application of Tolerances § 51.307 Application of... least one apple which is seriously damaged by insects or affected by decay or internal breakdown may be... have more than 3 times the tolerance specified, except that at least three defective apples may be...

Split-shift work in relation to stress, health and psychosocial work factors among bus drivers.

PubMed

Ihlström, Jonas; Kecklund, Göran; Anund, Anna

2017-01-01

Shift work has been associated with poor health, sleep and fatigue problems and low satisfaction with working hours. However, one type of shift working, namely split shifts, have received little attention. This study examined stress, health and psychosocial aspects of split-shift schedules among bus drivers in urban transport. A questionnaire was distributed to drivers working more than 70% of full time which 235 drivers in total answered. In general, drivers working split-shift schedules (n = 146) did not differ from drivers not working such shifts (n = 83) as regards any of the outcome variables that were studied. However, when individual perceptions towards split-shift schedules were taken into account, a different picture appeared. Bus drivers who reported problems working split shifts (36%) reported poorer health, higher perceived stress, working hours interfering with social life, lower sleep quality, more persistent fatigue and lower general work satisfaction than those who did not view split shifts as a problem. Moreover, drivers who reported problems with split shifts also perceived lower possibilities to influence working hours, indicating lower work time control. This study indicates that split shifts were not associated with increased stress, poorer health and adverse psychosocial work factors for the entire study sample. However, the results showed that individual differences were important and approximately one third of the drivers reported problems with split shifts, which in turn was associated with stress, poor health and negative psychosocial work conditions. More research is needed to understand the individual and organizational determinants of tolerance to split shifts.

Transcriptome Exploration in Leymus chinensis under Saline-Alkaline Treatment Using 454 Pyrosequencing

PubMed Central

Sun, Yepeng; Wang, Fawei; Wang, Nan; Dong, Yuanyuan; Liu, Qi; Zhao, Lei; Chen, Huan; Liu, Weican; Yin, Hailong; Zhang, Xiaomei; Yuan, Yanxi; Li, Haiyan

2013-01-01

Background Leymus chinensis (Trin.) Tzvel. is a high saline-alkaline tolerant forage grass genus of the tribe Gramineae family, which also plays an important role in protection of natural environment. To date, little is known about the saline-alkaline tolerance of L. chinensis on the molecular level. To better understand the molecular mechanism of saline-alkaline tolerance in L. chinensis, 454 pyrosequencing was used for the transcriptome study. Results We used Roche-454 massive parallel pyrosequencing technology to sequence two different cDNA libraries that were built from the two samples of control and under saline-alkaline treatment (optimal stress concentration-Hoagland solution with 100 mM NaCl and 200 mM NaHCO3). A total of 363,734 reads in control group and 526,267 reads in treatment group with an average length of 489 bp and 493 bp were obtained, respectively. The reads were assembled into 104,105 unigenes with MIRA sequence assemable software, among which, 73,665 unigenes were in control group, 88,016 unigenes in treatment group and 57,576 unigenes in both groups. According to the comparative expression analysis between the two groups with the threshold of “log2 Ratio ≥1”, there were 36,497 up-regulated unegenes and 18,218 down-regulated unigenes predicted to be the differentially expressed genes. After gene annotation and pathway enrichment analysis, most of them were involved in stress and tolerant function, signal transduction, energy production and conversion, and inorganic ion transport. Furthermore, 16 of these differentially expressed genes were selected for real-time PCR validation, and they were successfully confirmed with the results of 454 pyrosequencing. Conclusions This work is the first time to study the transcriptome of L. chinensis under saline-alkaline treatment based on the 454-FLX massively parallel DNA sequencing platform. It also deepened studies on molecular mechanisms of saline-alkaline in L. chinensis, and constituted a database for future studies. PMID:23365637

TH-CD-207A-02: Implementation of Live EPID-Based Inspiration Level Assessment (LEILA) for Deepinspiration Breath-Hold (DIBH) Monitoring Using MV Fluoroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lehmann, J; The University of Sydney, Sydney; The University of Newcastle, Newcastle

Purpose: As prior work has shown that current DIBH monitoring approaches using surrogate measures (marker block on chest) do not always correspond with the clinical quantity of interest (lung depth, LD), a software tool and workflow are introduced to use MV fluoroscopy during treatment for real-time / Live EPID-based Inspiration Level Assessment (LEILA). Methods: A prototype software tool calculates and displays the LD during the treatment of left sided breast cancer. Calculations are based on MV cine images which are acquired with the treatment beam thereby not incurring any additional imaging dose. Image capture and processing are implemented using amore » dedicated frame grabber computer. The calculation engine automatically detects image orientation and includes provisions for large treatment fields that exceed the size of the EPID panel. LD is measured along a line profile in the middle of the field. LEILA’s interface displays the current MV image, a reference image (DRR), the current LD, as well as a trace of LD over treatment time. The display includes patient specific LD tolerances. Tolerances are specified for each field and loaded before the treatment. A visual warning is generated when the tolerance is exceeded. LEILA is initially run in parallel with current DIBH techniques. When later run by itself DIBH setup will be done using skin marks and room laser. Results: Offline tests of LEILA confirmed accurate automatic LD measurement for a variety of patient geometries. Deployment of the EPID during all left sided breast treatments was well tolerated by patients and staff during a multi-month pilot. The frame grabber provides 11 frames-per-second; the MATLAB based LEILA prototype software can analyze five frames-per-second standalone on standard desktop hardware. Conclusion: LEILA provides an automated approach to quantitatively monitor LD on MV images during DIBH treatment. Future improvements include a database and further speed optimization.« less

Cold resistance depends on acclimation and behavioral caste in a temperate ant

NASA Astrophysics Data System (ADS)

Modlmeier, Andreas P.; Pamminger, Tobias; Foitzik, Susanne; Scharf, Inon

2012-10-01

Adjusting to low temperatures is important for animals living in cold environments. We studied the chill-coma recovery time in temperate ant workers ( Temnothorax nylanderi) from colonies collected in autumn and spring in Germany. We experimentally acclimated these ant colonies to cold temperatures followed by warm temperatures. As expected, cold-acclimated workers recovered faster from freezing temperatures, but subsequent heat acclimation did not change the short recovery times observed after cold acclimation. Hence, either heat acclimation improves cold tolerance, possibly as a general response to stress, or at least it does not negate enhanced cold tolerance following cold acclimation. Colonies collected in spring showed similar cold tolerance levels to cold-acclimated colonies in the laboratory. Next, we compared the chill-coma recovery time of different worker castes and found that exterior workers recovered faster than interior workers. This difference may be related to their more frequent exposure to cold, higher activity level, or distinct physiology. Interior workers were also heavier and showed a higher gaster-to-head ratio and thorax ratio compared to exterior workers. An obvious difference between exterior and interior workers is activity level, but we found no link between activity and cold tolerance. This suggests that physiology rather than behavioral differences could cause the increased cold tolerance of exterior workers. Our study reveals the importance of acclimation for cold tolerance under natural and standardized conditions and demonstrates differences in cold tolerance and body dimensions in monomorphic behavioral castes of an ant.

Mercury toxicity in the aquatic oligochaete Sparganophilus pearsei. II: Autotomy as a novel form of protection.

PubMed

Vidal, D E; Horne, A J

2003-11-01

Aquatic oligochaetes are commonly used for toxicity testing and for assessment of sediment impairment; some species can be relatively tolerant of sediment contaminants. However, there have been few studies of tolerance mechanisms; most work has focused on behavioral changes. The aquatic oligochaete worm, Sparganophilus pearsei, can be extremely tolerant to mercury in sediments depending on its prior history of exposure. Three S. pearsei populations, differing in their history of mercury exposure and in their tolerance to mercury, were assessed to determine tolerance mechanisms. In mercury-contaminated sediments, tolerant worms accumulated this contaminant in their caudal segments (i.e., their tails), which were then jettisoned via the process of autotomy, thus providing a mechanism of detoxification. This detoxification process appears to require a certain level of tolerance and may represent a novel exposure route for other organisms via feeding on discarded tails or release of accumulated contaminants as the tails decompose. Measurements of tissue mercury concentrations as contaminant body residues for this species (CBRs) are compared to other aquatic invertebrates.

Stress Introduction Rate Alters the Benefit of AcrAB-TolC Efflux Pumps.

PubMed

Langevin, Ariel M; Dunlop, Mary J

2018-01-01

Stress tolerance studies are typically conducted in an all-or-none fashion. However, in realistic settings-such as in clinical or metabolic engineering applications-cells may encounter stresses at different rates. Therefore, how cells tolerate stress may depend on its rate of appearance. To address this, we studied how the rate of stress introduction affects bacterial stress tolerance by focusing on a key stress response mechanism. Efflux pumps, such as AcrAB-TolC of Escherichia coli , are membrane transporters well known for the ability to export a wide variety of substrates, including antibiotics, signaling molecules, and biofuels. Although efflux pumps improve stress tolerance, pump overexpression can result in a substantial fitness cost to the cells. We hypothesized that the ideal pump expression level would involve a rate-dependent trade-off between the benefit of pumps and the cost of their expression. To test this, we evaluated the benefit of the AcrAB-TolC pump under different rates of stress introduction, including a step, a fast ramp, and a gradual ramp. Using two chemically diverse stresses, the antibiotic chloramphenicol and the jet biofuel precursor pinene, we assessed the benefit provided by the pumps. A mathematical model describing these effects predicted the benefit as a function of the rate of stress introduction. Our findings demonstrate that as the rate of introduction is lowered, stress response mechanisms provide a disproportionate benefit to pump-containing strains, allowing cells to survive beyond the original inhibitory concentrations. IMPORTANCE Efflux pumps are ubiquitous in nature and provide stress tolerance in the cells of species ranging from bacteria to mammals. Understanding how pumps provide tolerance has far-reaching implications for diverse fields, from medicine to biotechnology. Here, we investigated how the rate of stressor appearance impacts tolerance. We focused on two distinct substrates of AcrAB-TolC efflux pumps, the antibiotic chloramphenicol and the biofuel precursor pinene. Interestingly, tolerance is highly dependent on the rate of stress introduction. Therefore, it is important to consider not only the total quantity of a stressor but also the rate at which it is applied. The implications of this work are significant because environments are rarely static; antibiotic concentrations change during dosing, and metabolic engineering processes change with time. Copyright © 2017 American Society for Microbiology.

Specialized Microbiome of a Halophyte and its Role in Helping Non-Host Plants to Withstand Salinity

PubMed Central

Yuan, Zhilin; Druzhinina, Irina S.; Labbé, Jessy; Redman, Regina; Qin, Yuan; Rodriguez, Russell; Zhang, Chulong; Tuskan, Gerald A.; Lin, Fucheng

2016-01-01

Root microbiota is a crucial determinant of plant productivity and stress tolerance. Here, we hypothesize that the superior halo-tolerance of seepweed Suaeda salsa is tightly linked to a specialized belowground microbiome. To test this hypothesis, we performed a phylogenetic trait-based framework analysis based on bacterial 16S rRNA gene and fungal nuclear rRNA internal transcribed spacer profiling. Data showed that the dominant α-proteobacteria and γ-proteobacteria communities in bulk soil and root endosphere tend to be phylogenetically clustered and at the same time exhibit phylogenetic over-dispersion in rhizosphere. Likewise, the dominant fungal genera occurred at high phylogenetic redundancy. Interestingly, we found the genomes of rhizospheric and endophytic bacteria associated with S. salsa to be enriched in genes contributing to salt stress acclimatization, nutrient solubilization and competitive root colonization. A wide diversity of rhizobacteria with similarity to known halotolerant taxa further supported this interpretation. These findings suggest that an ecological patterned root-microbial interaction strategy has been adopted in S. salsa system to confront soil salinity. We also demonstrated that the potential core microbiome members improve non-host plants growth and salt tolerance. This work provides a platform to improve plant fitness with halophytes-microbial associates and novel insights into the functions of plant microbiome under salinity. PMID:27572178

Network topology and resilience analysis of South Korean power grid

NASA Astrophysics Data System (ADS)

Kim, Dong Hwan; Eisenberg, Daniel A.; Chun, Yeong Han; Park, Jeryang

2017-01-01

In this work, we present topological and resilience analyses of the South Korean power grid (KPG) with a broad voltage level. While topological analysis of KPG only with high-voltage infrastructure shows an exponential degree distribution, providing another empirical evidence of power grid topology, the inclusion of low voltage components generates a distribution with a larger variance and a smaller average degree. This result suggests that the topology of a power grid may converge to a highly skewed degree distribution if more low-voltage data is considered. Moreover, when compared to ER random and BA scale-free networks, the KPG has a lower efficiency and a higher clustering coefficient, implying that highly clustered structure does not necessarily guarantee a functional efficiency of a network. Error and attack tolerance analysis, evaluated with efficiency, indicate that the KPG is more vulnerable to random or degree-based attacks than betweenness-based intentional attack. Cascading failure analysis with recovery mechanism demonstrates that resilience of the network depends on both tolerance capacity and recovery initiation time. Also, when the two factors are fixed, the KPG is most vulnerable among the three networks. Based on our analysis, we propose that the topology of power grids should be designed so the loads are homogeneously distributed, or functional hubs and their neighbors have high tolerance capacity to enhance resilience.

Ethanol Cellular Defense Induce Unfolded Protein Response in Yeast

PubMed Central

Pérez-Torrado, Roberto

2016-01-01

Ethanol is a valuable industrial product and a common metabolite used by many cell types. However, this molecule produces high levels of cytotoxicity affecting cellular performance at several levels. In the presence of ethanol, cells must adjust some of their components, such as the membrane lipids to maintain homeostasis. In the case of microorganism as Saccharomyces cerevisiae, ethanol is one of the principal products of their metabolism and is the main stress factor during fermentation. Although, many efforts have been made, mechanisms of ethanol tolerance are not fully understood and very little evidence is available to date for specific signaling by ethanol in the cell. This work studied two S. cerevisiae strains, CECT10094, and Temohaya-MI26, isolated from flor wine and agave fermentation (a traditional fermentation from Mexico) respectively, which differ in ethanol tolerance, in order to understand the molecular mechanisms underlying the ethanol stress response and the reasons for different ethanol tolerance. The transcriptome was analyzed after ethanol stress and, among others, an increased activation of genes related with the unfolded protein response (UPR) and its transcription factor, Hac1p, was observed in the tolerant strain CECT10094. We observed that this strain also resist more UPR agents than Temohaya-MI26 and the UPR-ethanol stress correlation was corroborated observing growth of 15 more strains and discarding UPR correlation with other stresses as thermal or oxidative stress. Furthermore, higher activation of UPR pathway in the tolerant strain CECT10094 was observed using a UPR mCherry reporter. Finally, we observed UPR activation in response to ethanol stress in other S. cerevisiae ethanol tolerant strains as the wine strains T73 and EC1118. This work demonstrates that the UPR pathway is activated under ethanol stress occurring in a standard fermentation and links this response to an enhanced ethanol tolerance. Thus, our data suggest that there is a room for ethanol tolerance improvement by enhancing UPR response. PMID:26925053

Time and temperature interactions in freezing tolerance of winter wheat

USDA-ARS?s Scientific Manuscript database

In order to survive the temperature fluctuations that occur during the winter months, winter wheat (Triticum aestivum L.) plants must tolerate episodes of freezing to various temperatures for various lengths of time. In this study, the ability of six wheat cultivars to survive exposure to -13.5 to ...

Proteomic Techniques and Management of Flooding Tolerance in Soybean.

PubMed

Komatsu, Setsuko; Tougou, Makoto; Nanjo, Yohei

2015-09-04

Climate change is considered a major threat to world agriculture and food security. To improve the agricultural productivity and sustainability, the development of high-yielding stress-tolerant, and climate-resilient crops is essential. Of the abiotic stresses, flooding stress is a very serious hazard because it markedly reduces plant growth and grain yield. Proteomic analyses indicate that the effects of flooding stress are not limited to oxygen deprivation but include many other factors. Although many flooding response mechanisms have been reported, flooding tolerance mechanisms have not been fully clarified for soybean. There were limitations in soybean materials, such as mutants and varieties, while they were abundant in rice and Arabidopsis. In this review, plant proteomic technologies are introduced and flooding tolerance mechanisms of soybeans are summarized to assist in the improvement of flooding tolerance in soybeans. This work will expedite transgenic or marker-assisted genetic enhancement studies in crops for developing high-yielding stress-tolerant lines or varieties under abiotic stress.

Enrichment, isolation and characterization of fungi tolerant to 1-ethyl-3-methylimidazolium acetate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singer, S.W.; Reddy, A. P.; Gladden, J. M.

2010-12-15

This work aims to characterize microbial tolerance to 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]), ionic liquid that has emerged as a novel biomass pretreatment for lignocellulosic biomass. Enrichment experiments performed using inocula treated with [C2mim][OAc] under solid and liquid cultivation yielded fungal populationsdominated by Aspergilli. Ionic liquid-tolerant Aspergillus isolates from these enrichments were capable of growing in a radial plate growth assay in the presence of 10% [C2mim][OAc]. When a [C2mim][OAc]-tolerant Aspergillus fumigatus strain was grown in the presence of switchgrass, endoglucanases and xylanases were secreted that retained residual enzymatic activity in the presence of 20% [C2mim][OAc]. The results of the study suggestmore » tolerance to ionic liquids is a general property of Aspergilli. Tolerance to an industrially important ionic liquid was discovered in a fungal genera that is widely used in biotechnology, including biomass deconstruction.« less

Effect of Voriconazole on Candida tropicalis Biofilms: Relation with ERG Genes Expression.

PubMed

Fernandes, Tânia; Silva, Sónia; Henriques, Mariana

2016-10-01

Candida tropicalis has emerged as the third most prevalent fungal pathogens and its ability to form biofilms has been considered one of the most important virulence factors, since biofilms represent high tolerance to antifungal agents. However, the mechanisms of C. tropicalis biofilm resistance to antifungals remain poorly understood. Thus, the main aim of this work was to infer about the effect of voriconazole on the formation and control of C. tropicalis biofilms and disclose its relationship with ERG genes' expression. Planktonic cells tolerance of several C. tropicalis clinical isolates to voriconazole was determined through of antifungal susceptibility test, and the effect of this azole against C. tropicalis biofilm formation and pre-formed biofilms was evaluated by cultivable cells determination and total biomass quantification. ERG genes expression was analyzed by quantitative real-time polymerase chain reaction. This work showed that C. tropicalis resistance to voriconazole is strain dependent and that voriconazole was able to partially control biofilm formation, but was unable to eradicate C. tropicalis pre-formed biofilms. Moreover, C. tropicalis biofilms resistance to voriconazole seems to be associated with alterations of sterol content in the cell membrane, resulting in ERG genes overexpression. Voriconazole is unable to control C. tropicalis biofilms, and the overexpression of ERG genes is a possible mechanism of biofilm resistance.

Multiple objects tracking with HOGs matching in circular windows

NASA Astrophysics Data System (ADS)

Miramontes-Jaramillo, Daniel; Kober, Vitaly; Díaz-Ramírez, Víctor H.

2014-09-01

In recent years tracking applications with development of new technologies like smart TVs, Kinect, Google Glass and Oculus Rift become very important. When tracking uses a matching algorithm, a good prediction algorithm is required to reduce the search area for each object to be tracked as well as processing time. In this work, we analyze the performance of different tracking algorithms based on prediction and matching for a real-time tracking multiple objects. The used matching algorithm utilizes histograms of oriented gradients. It carries out matching in circular windows, and possesses rotation invariance and tolerance to viewpoint and scale changes. The proposed algorithm is implemented in a personal computer with GPU, and its performance is analyzed in terms of processing time in real scenarios. Such implementation takes advantage of current technologies and helps to process video sequences in real-time for tracking several objects at the same time.

Intellectual property rights related to the genetically modified glyphosate tolerant soybeans in Brazil.

PubMed

Rodrigues, Roberta L; Lage, Celso L S; Vasconcellos, Alexandre G

2011-06-01

The present work analyzes the different modalities of protection of the intellectual creations in the biotechnology agricultural field. Regarding the Brazilian legislations related to the theme (the Industrial Property Law - no. 9. 279/96 and the Plant Variety Protection Law - no. 9. 456/97), and based in the international treaties signed by Brazil, the present work points to the inclusions of each of them, as well as to their interfaces using as reference the case study of glyphosate tolerant genetically modified soybean. For this case study, Monsanto's pipelines patents were searched and used to analyze the limits of patent protection in respect to others related to the Intellectual Property (IP) laws. Thus, it was possible to elucidate the complex scenario of the Intellectual Property of the glyphosate tolerant soybeans, since for the farmer it is hard to correlate the royalties payment with the IP enterprise's rights.

40 CFR 86.515-78 - EPA urban dynamometer driving schedule.

Code of Federal Regulations, 2010 CFR

2010-07-01

... I(b) (b) The speed tolerance at any given time on the dynamometer driving schedule prescribed in... than the tolerances (such as may occur during gear changes) are acceptable provided they occur for less... requirements of § 86.532 the speed tolerance shall be as specified above, except that the upper and lower...

Urbanism, Region, and Tolerance Revisited: The Case of Racial Prejudice.

ERIC Educational Resources Information Center

Tuch, Steven A.

1987-01-01

Using prejudice toward blacks as the outcome measure, analysis of national survey data for 1972 and 1985 indicates that: urbanites and non-Southerners are more racially tolerant than their non-urban and Southern counterparts; the net effects of urbanism on tolerance have increased over time while region effects have decreased; and urban to…

Adjoint-Based, Three-Dimensional Error Prediction and Grid Adaptation

NASA Technical Reports Server (NTRS)

Park, Michael A.

2002-01-01

Engineering computational fluid dynamics (CFD) analysis and design applications focus on output functions (e.g., lift, drag). Errors in these output functions are generally unknown and conservatively accurate solutions may be computed. Computable error estimates can offer the possibility to minimize computational work for a prescribed error tolerance. Such an estimate can be computed by solving the flow equations and the linear adjoint problem for the functional of interest. The computational mesh can be modified to minimize the uncertainty of a computed error estimate. This robust mesh-adaptation procedure automatically terminates when the simulation is within a user specified error tolerance. This procedure for estimating and adapting to error in a functional is demonstrated for three-dimensional Euler problems. An adaptive mesh procedure that links to a Computer Aided Design (CAD) surface representation is demonstrated for wing, wing-body, and extruded high lift airfoil configurations. The error estimation and adaptation procedure yielded corrected functions that are as accurate as functions calculated on uniformly refined grids with ten times as many grid points.

Comparison of benthic indices for the evaluation of ecological status of three Slovenian transitional water bodies (northern Adriatic).

PubMed

Pitacco, Valentina; Lipej, Lovrenc; Mavrič, Borut; Mistri, Michele; Munari, Cristina

2018-04-01

Benthic indicators are important tools for the classification of coastal and transitional water bodies. The aim of the work was to assess for the first time the Environmental Status (ES) of Slovenian transitional waters, comparing the following biotic indices: richness, Shannon-Weaver diversity, AMBI, M-AMBI, BENTIX and BITS indices. A total of 13 stations were sampled with a Van Veen grab, in three ecosystems in the northern Adriatic. Samples were sieved and sorted, invertebrates identified and counted. The anthropogenic impact was estimated with professional judgement. Richness and diversity showed a good response to anthropogenic pressure. Conversely, indices based on sensitivity/tolerance groups did not showed a clear distinction between more and less impacted ecosystems. In particular BENTIX underestimated the ES, while with BITS there was a overestimation. The best evaluation was obtained with M-AMBI, because even if based on a sensitivity/tolerance approach, it considered also the structural aspect of the community. Copyright © 2017 Elsevier Ltd. All rights reserved.

Natural Selection on Individual Variation in Tolerance of Gastrointestinal Nematode Infection

PubMed Central

Hayward, Adam D.; Nussey, Daniel H.; Wilson, Alastair J.; Berenos, Camillo; Pilkington, Jill G.; Watt, Kathryn A.; Pemberton, Josephine M.; Graham, Andrea L.

2014-01-01

Hosts may mitigate the impact of parasites by two broad strategies: resistance, which limits parasite burden, and tolerance, which limits the fitness or health cost of increasing parasite burden. The degree and causes of variation in both resistance and tolerance are expected to influence host–parasite evolutionary and epidemiological dynamics and inform disease management, yet very little empirical work has addressed tolerance in wild vertebrates. Here, we applied random regression models to longitudinal data from an unmanaged population of Soay sheep to estimate individual tolerance, defined as the rate of decline in body weight with increasing burden of highly prevalent gastrointestinal nematode parasites. On average, individuals lost weight as parasite burden increased, but whereas some lost weight slowly as burden increased (exhibiting high tolerance), other individuals lost weight significantly more rapidly (exhibiting low tolerance). We then investigated associations between tolerance and fitness using selection gradients that accounted for selection on correlated traits, including body weight. We found evidence for positive phenotypic selection on tolerance: on average, individuals who lost weight more slowly with increasing parasite burden had higher lifetime breeding success. This variation did not have an additive genetic basis. These results reveal that selection on tolerance operates under natural conditions. They also support theoretical predictions for the erosion of additive genetic variance of traits under strong directional selection and fixation of genes conferring tolerance. Our findings provide the first evidence of selection on individual tolerance of infection in animals and suggest practical applications in animal and human disease management in the face of highly prevalent parasites. PMID:25072883

Frequency of satisfaction and dissatisfaction with practice among rural-based, group-employed physicians and non-physician practitioners.

PubMed

Waddimba, Anthony C; Scribani, Melissa; Krupa, Nicole; May, John J; Jenkins, Paul

2016-10-22

Widespread dissatisfaction among United States (U.S.) clinicians could endanger ongoing reforms. Practitioners in rural/underserved areas withstand stressors that are unique to or accentuated in those settings. Medical professionals employed by integrating delivery systems are often distressed by the cacophony of organizational change(s) that such consolidation portends. We investigated the factors associated with dis/satisfaction with rural practice among doctors/non-physician practitioners employed by an integrated healthcare delivery network serving 9 counties of upstate New York, during a time of organizational transition. We linked administrative data about practice units with cross-sectional data from a self-administered multi-dimensional questionnaire that contained practitioner demographics plus valid scales assessing autonomy/relatedness needs, risk aversion, tolerance for uncertainty/ambiguity, meaningfulness of patient care, and workload. We targeted medical professionals on the institutional payroll for inclusion. We excluded those who retired, resigned or were fired during the study launch, plus members of the advisory board and research team. Fixed-effects beta regressions were performed to test univariate associations between each factor and the percent of time a provider was dis/satisfied. Factors that manifested significant fixed effects were entered into multivariate, inflated beta regression models of the proportion of time that practitioners were dis/satisfied, incorporating clustering by practice unit as a random effect. Of the 473 eligible participants. 308 (65.1 %) completed the questionnaire. 59.1 % of respondents were doctoral-level; 40.9 % mid-level practitioners. Practitioners with heavier workloads and/or greater uncertainty intolerance were less likely to enjoy top-quintile satisfaction; those deriving greater meaning from practice were more likely. Higher meaningfulness and gratified relational needs increased one's likelihood of being in the lowest quintile of dissatisfaction; heavier workload and greater intolerance of uncertainty reduced that likelihood. Practitioner demographics and most practice unit characteristics did not manifest any independent effect. Mutable factors, such as workload, work meaningfulness, relational needs, uncertainty/ambiguity tolerance, and risk-taking attitudes displayed the strongest association with practitioner satisfaction/dissatisfaction, independent of demographics and practice unit characteristics. Organizational efforts should be dedicated to a redesign of group-employment models, including more equitable division of clinical labor, building supportive peer networks, and uncertainty/risk tolerance coaching, to improve the quality of work life among rural practitioners.

Development of advanced fermentor control applications for use in an industrial automation environment.

PubMed

Hamilton, Ryan; Tamminana, Krishna; Boyd, John; Sasaki, Gen; Toda, Alex; Haskell, Sid; Danbe, Elizabeth

2013-04-01

We present a software platform developed by Genentech and MathWorks Consulting Group that allows arbitrary MATLAB (MATLAB is a registered trademark of The MathWorks, Inc.) functions to perform supervisory control of process equipment (in this case, fermentors) via the OLE for process control (OPC) communication protocol, under the direction of an industrial automation layer. The software features automated synchronization and deployment of server control code and has been proven to be tolerant of OPC communication interruptions. Since deployment in the spring of 2010, this software has successfully performed supervisory control of more than 700 microbial fermentations in the Genentech pilot plant and has enabled significant reductions in the time required to develop and implement novel control strategies (months reduced to days). The software is available for download at the MathWorks File Exchange Web site at http://www.mathworks.com/matlabcentral/fileexchange/36866.

Serial Monitoring of Immune Markers Being Represented Regulatory T Cell/T Helper 17 Cell Ratio: Indicating Tolerance for Tapering Immunosuppression after Liver Transplantation

PubMed Central

Jhun, JooYeon; Lee, Seung Hoon; Lee, Soon Kyu; Kim, Hee Yeon; Jung, Eun Sun; Kim, Dong Goo; Choi, JeongWon; Bae, Si Hyun; Yoon, Seung Kew; Chung, Byung Ha; Yang, Chul Woo; Cho, Mi-La; Choi, Jong Young

2018-01-01

Recipients of liver transplantation (LT) require long-term immunosuppressive drug treatment, but lifelong immunosuppressive treatment has severe side effects. It is known that some LT recipients develop immune tolerance, and although the development of such operational tolerance should allow a decrease in the burden of immunosuppressive drug treatment, the factors that indicate operational tolerance are not clear. This study aimed to monitor immunological markers over time in LT recipients to identify those markers indicating the development of operational tolerance. We performed a prospective pilot study measuring immune markers, including the ratio of regulatory T (Treg) and T helper (Th) 17 cells in peripheral blood in the 14 most immunologically stable patients among 70 clinically stable LT recipients. The doses of immunosuppressive drugs given to these 14 LT recipients were tapered over time and they were monitored for immunological markers related to the development of immune tolerance. As the doses of immunosuppressive drugs were reduced, the Treg/Th17, Th1/Th17, and CD8/Th17 ratio in tolerant recipients was significantly increased compared with that of nontolerant recipients. These results suggest that monitoring of changes in the immune makers, including Treg/Th17 ratio during tapering of immunosuppression may allow prediction of the development of tolerance. PMID:29545795

Antimicrobial Tolerance in Biofilms

PubMed Central

Stewart, Philip S.

2015-01-01

The tolerance of microorganisms in biofilms to antimicrobial agents is examined through a meta-analysis of literature data. A numerical tolerance factor comparing the rates of killing in the planktonic and biofilm states is defined to provide a quantitative basis for the analysis. Tolerance factors for biocides and antibiotics range over three orders of magnitude. This variation is not explained by taking into account the molecular weight of the agent, the chemistry of the agent, the substratum material, or the speciation of the microorganisms. Tolerance factors do depend on the areal cell density of the biofilm at the time of treatment and on the age of the biofilm as grown in a particular experimental system. This suggests that there is something that happens during biofilm maturation, either physical or physiological, that is essential for full biofilm tolerance. Experimental measurements of antimicrobial penetration times in biofilms range over orders of magnitude, with slower penetration (>12 min) observed for reactive oxidants and cationic molecules. These agents are retarded through the interaction of reaction, sorption, and diffusion. The specific physiological status of microbial cells in a biofilm contributes to antimicrobial tolerance. A conceptual framework for categorizing physiological cell states is discussed in the context of antimicrobial susceptibility. It is likely that biofilms harbor cells in multiple states simultaneously (e.g., growing, stress-adapted, dormant, inactive) and that this physiological heterogeneity is an important factor in the tolerance of the biofilm state. PMID:26185072

Health Effects of Shift Work

PubMed Central

LaDou, Joseph

1982-01-01

More than 13.5 million American workers, close to 20 percent of the work force, are assigned to evening or night shifts. In some industries such as automobile, petrochemical and textile manufacturing the proportion of shift workers is greater than 50 percent. As the popularity of shift work and other “alternative work schedules” grows, concern is increasing over the disturbance created in the lives of workers and their families by these economically and socially useful innovations. Twenty percent of workers are unable to tolerate shift work. Daily physiologic variations termed circadian rhythms are interactive and require a high degree of phase relationship to produce subjective feelings of wellbeing. Disturbance of these activities, circadian desynchronization, whether from passage over time zones or from shift rotation, results in health effects such as disturbance of the quantity and quality of sleep, disturbance of gastrointestinal and other organ system activities, and aggravation of diseases such as diabetes mellitus, epilepsy and thyrotoxicosis. Worker selection can reduce the number of health problems resulting from shift work. The periodic examination of shift workers is recommended. PMID:6962577

Performance of various branch-point tolerant phase reconstructors with finite time delays and measurement noise

NASA Astrophysics Data System (ADS)

Zetterlind, Virgil E., III; Magee, Eric P.

2002-06-01

This study extends branch point tolerant phase reconstructor research to examine the effect of finite time delays and measurement error on system performance. Branch point tolerant phase reconstruction is particularly applicable to atmospheric laser weapon and communication systems, which operate in extended turbulence. We examine the relative performance of a least squares reconstructor, least squares plus hidden phase reconstructor, and a Goldstein branch point reconstructor for various correction time-delays and measurement noise scenarios. Performance is evaluated using a wave-optics simulation that models a 100km atmospheric propagation of a point source beacon to a transmit/receive aperture. Phase-only corrections are then calculated using the various reconstructor algorithms and applied to an outgoing uniform field. Point Strehl is used as the performance metric. Results indicate that while time delays and measurement noise reduce the performance of branch point tolerant reconstructors, these reconstructors can still outperform least squares implementations in many cases. We also show that branch point detection becomes the limiting factor in measurement noise corrupted scenarios.

Cyber situation awareness: modeling detection of cyber attacks with instance-based learning theory.

PubMed

Dutt, Varun; Ahn, Young-Suk; Gonzalez, Cleotilde

2013-06-01

To determine the effects of an adversary's behavior on the defender's accurate and timely detection of network threats. Cyber attacks cause major work disruption. It is important to understand how a defender's behavior (experience and tolerance to threats), as well as adversarial behavior (attack strategy), might impact the detection of threats. In this article, we use cognitive modeling to make predictions regarding these factors. Different model types representing a defender, based on Instance-Based Learning Theory (IBLT), faced different adversarial behaviors. A defender's model was defined by experience of threats: threat-prone (90% threats and 10% nonthreats) and nonthreat-prone (10% threats and 90% nonthreats); and different tolerance levels to threats: risk-averse (model declares a cyber attack after perceiving one threat out of eight total) and risk-seeking (model declares a cyber attack after perceiving seven threats out of eight total). Adversarial behavior is simulated by considering different attack strategies: patient (threats occur late) and impatient (threats occur early). For an impatient strategy, risk-averse models with threat-prone experiences show improved detection compared with risk-seeking models with nonthreat-prone experiences; however, the same is not true for a patient strategy. Based upon model predictions, a defender's prior threat experiences and his or her tolerance to threats are likely to predict detection accuracy; but considering the nature of adversarial behavior is also important. Decision-support tools that consider the role of a defender's experience and tolerance to threats along with the nature of adversarial behavior are likely to improve a defender's overall threat detection.

Predicting coexistence of plants subject to a tolerance-competition trade-off.

PubMed

Haegeman, Bart; Sari, Tewfik; Etienne, Rampal S

2014-06-01

Ecological trade-offs between species are often invoked to explain species coexistence in ecological communities. However, few mathematical models have been proposed for which coexistence conditions can be characterized explicitly in terms of a trade-off. Here we present a model of a plant community which allows such a characterization. In the model plant species compete for sites where each site has a fixed stress condition. Species differ both in stress tolerance and competitive ability. Stress tolerance is quantified as the fraction of sites with stress conditions low enough to allow establishment. Competitive ability is quantified as the propensity to win the competition for empty sites. We derive the deterministic, discrete-time dynamical system for the species abundances. We prove the conditions under which plant species can coexist in a stable equilibrium. We show that the coexistence conditions can be characterized graphically, clearly illustrating the trade-off between stress tolerance and competitive ability. We compare our model with a recently proposed, continuous-time dynamical system for a tolerance-fecundity trade-off in plant communities, and we show that this model is a special case of the continuous-time version of our model.

Development of low-loading, carbon monoxide tolerant PEM fuel cell electrodes

NASA Astrophysics Data System (ADS)

Haug, Andrew Thomas

This work discusses the problems of, and potential solutions to, high catalyst cost of and carbon monoxide (CO) poisoning of the proton-exchange membrane fuel cell (PEMFC). As this is a comprehensive work, background on fuel cells and specifically PEMFCs is first presented. A discussion of the current status of PEMFCs is presented showing ongoing work for stationary, transportation, portable and military applications. This leads into two of the more significant problems preventing widespread commercialization of PEMFC technology: poisoning of the catalyst by CO and the cost of the catalyst. A thorough examination of CO poisoning of the PEMFC anode is presented from how CO comes to be present in the feed stream of the PEMFC anode to how it then poisons the PEMFC anode. The first work presented here describes the development of a novel CO tolerant anode (the Ruthenium filter). It shows that by placing a layer of carbon-supported Ruthenium catalyst between the Pt catalyst and the anode flow field to form a filter, tolerance to CO will be increased relative to a Pt:Ru alloy when oxygen is added to the anode fuel stream. Secondly, after an introduction to catalyst preparation techniques used today and a brief discussion of catalyst-cost in PEMFCs, it is shown how sputter-deposition technology may be used to create more kinetically active PEMFC catalyst electrodes versus standard ink-based techniques. The technologies of the Ru filter and sputter-deposition are then combined to create a low-loading, CO tolerant anode for the PEMFC. In the final work, the effect of the airbleed on CO oxidation is then modeled. In the concluding chapter, it is shown how the work presented can lead the PEMFC closer to large-scale commercialization. The Appendix A provides a detailed method by which PEMFC MEAs were manufactured using catalyst inks. This method served as the basis for all original works presented. Appendix B--F provide further background and information on the mathematical model developed, including a printout of the Fortran code used to generate the model results.

Human-in-the-loop Bayesian optimization of wearable device parameters

PubMed Central

Malcolm, Philippe; Speeckaert, Jozefien; Siviy, Christoper J.; Walsh, Conor J.; Kuindersma, Scott

2017-01-01

The increasing capabilities of exoskeletons and powered prosthetics for walking assistance have paved the way for more sophisticated and individualized control strategies. In response to this opportunity, recent work on human-in-the-loop optimization has considered the problem of automatically tuning control parameters based on realtime physiological measurements. However, the common use of metabolic cost as a performance metric creates significant experimental challenges due to its long measurement times and low signal-to-noise ratio. We evaluate the use of Bayesian optimization—a family of sample-efficient, noise-tolerant, and global optimization methods—for quickly identifying near-optimal control parameters. To manage experimental complexity and provide comparisons against related work, we consider the task of minimizing metabolic cost by optimizing walking step frequencies in unaided human subjects. Compared to an existing approach based on gradient descent, Bayesian optimization identified a near-optimal step frequency with a faster time to convergence (12 minutes, p < 0.01), smaller inter-subject variability in convergence time (± 2 minutes, p < 0.01), and lower overall energy expenditure (p < 0.01). PMID:28926613

The RTE inversion on FPGA aboard the solar orbiter PHI instrument

NASA Astrophysics Data System (ADS)

Cobos Carrascosa, J. P.; Aparicio del Moral, B.; Ramos Mas, J. L.; Balaguer, M.; López Jiménez, A. C.; del Toro Iniesta, J. C.

2016-07-01

In this work we propose a multiprocessor architecture to reach high performance in floating point operations by using radiation tolerant FPGA devices, and under narrow time and power constraints. This architecture is used in the PHI instrument that carries out the scientific analysis aboard the ESA's Solar Orbiter mission. The proposed architecture, in a SIMD flavor, is aimed to be an accelerator within the Data Processing Unit (it is composed by a main Leon processor and two FPGAs) for carrying out the RTE inversion on board the spacecraft using a relatively slow FPGA device - Xilinx XQR4VSX55-. The proposed architecture squeezes the FPGA resources in order to reach the computational requirements and improves the ground-based system performance based on commercial CPUs regarding time and power consumption. In this work we demonstrate the feasibility of using this FPGA devices embedded in the SO/PHI instrument. With that goal in mind, we perform tests to evaluate the scientific results and to measure the processing time and power consumption for carrying out the RTE inversion.

Acquired Immunological Tolerance to a Fraction of Bovine Gamma Globulin

PubMed Central

Dresser, D. W.

1961-01-01

A state of acquired immunological tolerance to bovine gamma globulin (BGG) has been observed in CBA mice injected with 10 mg. BGG within 12 hours of birth. Tolerance was demonstrated by a lack of immune elimination of 131I labelled BGG (BGG-131I) after prior challenge with Freund's adjuvant containing BGG. The degree of tolerance was found to diminish when the time between the tolerance injection and the challenge injection with adjuvant was increased. Mice were found to be tolerant 4 months after injection of 10 mg. BGG at birth but other similarly treated mice were found to be partially immune when challenged 6 months after the tolerance injection. This diminution of tolerance could be prevented by injections of antigen into adult mice whilst they were still tolerant. Precipitin and haemagglutination tests showed that antibody to BGG was present in mice shown to be tolerant to BGG by the antigen-elimination technique. The Ouchterlony double-diffusion technique showed that the mice were tolerant to one fraction of BGG but immune to at least one other fraction. The tolerated fraction of BGG was identified by means of starch-gel electrophoresis. ImagesFIG. 2 PMID:13724353

Flooding tolerance in interspecific introgression lines containing chromosome segments from teosinte (Zea nicaraguensis) in maize (Zea mays subsp. mays)

PubMed Central

Mano, Y.; Omori, F.

2013-01-01

Background and Aims Nicaraguan teosinte (Zea nicaraguensis), a species found in frequently flooded areas, provides useful germplasm for breeding flooding-tolerant maize (Z. mays subsp. mays). The objective of this study was to select flooding-tolerant lines using a library of introgression lines (ILs), each containing a chromosome segment from Z. nicaraguensis in the maize inbred line Mi29. Methods To produce the ILs, a single F1 plant derived from a cross between maize Mi29 and Z. nicaraguensis was backcrossed to Mi29 three times, self-pollinated four times and genotyped using simple sequence repeat markers. Flooding tolerance was evaluated at the seedling stage under reducing soil conditions. Key Results By backcrossing and selfing, a series of 45 ILs were developed covering nearly the entire maize genome. Five flooding-tolerant lines were identified from among the ILs by evaluating leaf injury. Among these, line IL#18, containing a Z. nicaraguensis chromosome segment on the long arm of chromosome 4, showed the greatest tolerance to flooding, suggesting the presence of a major quantitative trait locus (QTL) in that region. The presence of the QTL was verified by examining flooding tolerance in a population segregating for the candidate region of chromosome 4. There was no significant relationship between the capacity to form constitutive aerenchyma and flooding tolerance in the ILs, indicating the presence of other factors related to flooding tolerance under reducing soil conditions. Conclusions A flooding-tolerant genotype, IL#18, was identified; this genotype should be useful for maize breeding. In addition, because the chromosome segments of Z. nicaraguensis in the ILs cover nearly the entire genome and Z. nicaraguensis possesses several unique traits related to flooding tolerance, the ILs should be valuable material for additional QTL detection and the development of flooding-tolerant maize lines. PMID:23877074

Copper tolerance of brown-rot fungi : time course of oxalic acid production

Treesearch

Frederick Green; Carol A. Clausen

2003-01-01

The increase in the use of non-arsenical copper-based wood preservatives in response to environmental concerns has been accompanied by interest in copper-tolerant decay fungi. Oxalic acid production by brown-rot fungi has been proposed as one mechanism of copper tolerance. Fifteen brown-rot fungi representing the genera Postia, Wolfiporia, Meruliporia, Gloeophyllum,...

75 FR 80343 - Extension of Tolerances for Emergency Exemptions (Multiple Chemicals)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

... Timothy grass for control of Banks grass mite in Nevada. This regulation extends time-limited tolerances... fenoxaprop-ethyl in or on grass grown for seed for control of noxious weed species in Oregon. This regulation... on grass forage and grass hay at 0.05 ppm for an additional 3-year period. These tolerances will...

The effects of cold acclimation on photosynthetic apparatus and the expression of COR14b in four genotypes of barley (Hordeum vulgare) contrasting in their tolerance to freezing and high-light treatment in cold conditions.

PubMed

Rapacz, Marcin; Wolanin, Barbara; Hura, Katarzyna; Tyrka, Miroslaw

2008-04-01

Cold acclimation modifies the balance of the energy absorbed and metabolized in the dark processes of photosynthesis, which may affect the expression of cold-regulated (COR) genes. At the same time, a gradual acclimation to the relatively high light conditions is observed, thereby minimizing the potential for photo-oxidative damage. As a result, the resistance to photoinhibition in the cold has often been identified as a trait closely related to freezing tolerance. Using four barley genotypes that differentially express both traits, the effect of cold acclimation on freezing tolerance and high-light tolerance was studied together with the expression of COR14b, one of the best-characterized barley COR genes. Plants were cold acclimated for 2 weeks at 2 degrees C. Freezing tolerance was studied by means of electrolyte leakage. Changes in photosynthetic apparatus and high-light tolerance were monitored by means of chlorophyll fluorescence. Accumulation of COR14b and some proteins important in photosynthetic acclimation to cold were studied with western analysis. COR14b transcript accumulation during cold acclimation was assessed with real-time PCR. Cold acclimation increased both freezing tolerance and high-light tolerance, especially when plants were treated with high light after non-lethal freezing. In all plants, cold acclimation triggered the increase in photosynthetic capacity during high-light treatment. In two plants that were characterized by higher high-light tolerance but lower freezing tolerance, higher accumulation of COR14b transcript and protein was observed after 7 d and 14 d of cold acclimation, while a higher transient induction of COR14b expression was observed in freezing-tolerant plants during the first day of cold acclimation. High-light tolerant plants were also characterized with a higher level of PsbS accumulation and more efficient dissipation of excess light energy. Accumulation of COR14b in barley seems to be important for resistance to combined freezing and high-light tolerance, but not for freezing tolerance per se.

Efficacy, safety and tolerability of rasagiline as adjunctive therapy in elderly patients with Parkinson's disease.

PubMed

Tolosa, E; Stern, M B

2012-02-01

Rasagiline, an MAO-B inhibitor, is indicated for the treatment of Parkinson's disease (PD). In this post hoc analysis, the efficacy, safety and tolerability of rasagiline as an adjunct to levodopa were compared with placebo in elderly (≥70 years) and younger (<70 years) patients with PD. Data were pooled from the Parkinson's Rasagiline: Efficacy and Safety on the Treatment of 'OFF' and Lasting effect in Adjunct therapy with Rasagiline Given Once daily randomized, double-blind, placebo-controlled trials with the primary efficacy end-point being the reduction from baseline in daily OFF time. Secondary efficacy end-points included scores for Clinical Global Improvement (CGI)-Examiner during ON time, Unified Parkinson's Disease Rating Scale (UPDRS)-ADL during OFF time, UPDRS-Motor during ON time and total daily ON time with and without troublesome dyskinesia. Tolerability was evaluated from adverse events (AEs) in the two age groups. Rasagiline decreased daily OFF time versus placebo (P<0.01) and improved CGI-Examiner score (P=0.001) and UPDRS-Motor ON score (P<0.05). Changes in UPDRS-ADL OFF score and total daily ON time without dyskinesia also favoured rasagiline but were not significant. Between-group comparisons (≥70 vs. <70 years) showed that efficacy was unaffected by age for all end-points (P>0.1), and rasagiline was well tolerated amongst both groups of patients with a comparable incidence of total and dopaminergic AEs (P>0.1). Adjunct rasagiline is efficacious and well tolerated in elderly non-demented patients (≥70 years) with moderate to advanced PD. Confirmation of the efficacy and safety of rasagiline in the elderly patient subgroup is especially relevant because of the increasing number of elderly patients with PD. © 2011 The Author(s). European Journal of Neurology © 2011 EFNS.

Rapid recovery from transient faults in the fault-tolerant processor with fault-tolerant shared memory

NASA Technical Reports Server (NTRS)

Harper, Richard E.; Butler, Bryan P.

1990-01-01

The Draper fault-tolerant processor with fault-tolerant shared memory (FTP/FTSM), which is designed to allow application tasks to continue execution during the memory alignment process, is described. Processor performance is not affected by memory alignment. In addition, the FTP/FTSM incorporates a hardware scrubber device to perform the memory alignment quickly during unused memory access cycles. The FTP/FTSM architecture is described, followed by an estimate of the time required for channel reintegration.

Loss of tolerance for fishes previously tolerated in children with fish food protein induced enterocolitis syndrome.

PubMed

Miceli Sopo, S; Fantacci, C; Bersani, G; Romano, A; Monaco, S

We describe two case reports presenting some novel information on fish FPIES. Fish FPIES to one fish does not always start at the same time to other fish. Additionally, development of tolerance to the index fish do not necessarily imply tolerance to other reactive fish. This reflects on the best management of children with FPIES fish. Copyright © 2017 SEICAP. Published by Elsevier España, S.L.U. All rights reserved.

A time reference distribution concept for a time division communication network

NASA Technical Reports Server (NTRS)

Stover, H. A.

1973-01-01

Starting with an assumed ideal network having perfect clocks at every node and known fixed transmission delays between nodes, the effects of adding tolerances to both transmission delays and nodal clocks is described. The advantages of controlling tolerances on time rather than frequency are discussed. Then a concept is presented for maintaining these tolerances on time throughout the network. This concept, called time reference distribution, is a systematic technique for distributing time reference to all nodes of the network. It is reliable, survivable and possesses many other desirable characteristics. Some of its features such as an excellent self monitoring capability will be pointed out. Some preliminary estimates of the accuracy that might be expected are developed and there is a brief discussion of the impact upon communication system costs. Time reference distribution is a concept that appears very attractive. It has not had experimental evaluation and has not yet been endorsed for use in any communication network.

Understanding of how Propionibacterium acidipropionici respond to propionic acid stress at the level of proteomics

PubMed Central

Guan, Ningzi; Shin, Hyun-dong; Chen, Rachel R.; Li, Jianghua; Liu, Long; Du, Guocheng; Chen, Jian

2014-01-01

Propionic acid (PA) is an important platform chemical in the food, agriculture, and pharmaceutical industries and is mainly biosynthesized by propionibacteria. Acid tolerance in PA-producing strains is crucial. In previous work, we investigated the acid tolerance mechanism of Propionibacterium acidipropionici at microenvironmental levels by analyzing physiological changes in the parental strain and three PA-tolerant mutants obtained by genome shuffling. However, the molecular mechanism of PA tolerance in P. acidipropionici remained unclear. Here, we performed a comparative proteomics study of P. acidipropionici CGMCC 1.2230 and the acid-tolerant mutant P. acidipropionici WSH1105; MALDI-TOF/MS identified 24 proteins that significantly differed between the parental and shuffled strains. The differentially expressed proteins were mainly categorized as key components of crucial biological processes and the acid stress response. Quantitative reverse transcriptase polymerase chain reaction (qRT-PCR) was used to confirm differential expression of nine key proteins. Overexpression of the secretory protein glyceraldehyde-3-phosphate dehydrogenase and ATP synthase subunit α in Escherichia coli BL21 improved PA and acetic acid tolerance; overexpression of NADH dehydrogenase and methylmalonyl-CoA epimerase improved PA tolerance. These results provide new insights into the acid tolerance of P. acidipropionici and will facilitate the development of PA production through fermentation by propionibacteria. PMID:25377721

Enhanced fault-tolerant quantum computing in d-level systems.

PubMed

Campbell, Earl T

2014-12-05

Error-correcting codes protect quantum information and form the basis of fault-tolerant quantum computing. Leading proposals for fault-tolerant quantum computation require codes with an exceedingly rare property, a transversal non-Clifford gate. Codes with the desired property are presented for d-level qudit systems with prime d. The codes use n=d-1 qudits and can detect up to ∼d/3 errors. We quantify the performance of these codes for one approach to quantum computation known as magic-state distillation. Unlike prior work, we find performance is always enhanced by increasing d.

Validation Methods Research for Fault-Tolerant Avionics and Control Systems: Working Group Meeting, 2

NASA Technical Reports Server (NTRS)

Gault, J. W. (Editor); Trivedi, K. S. (Editor); Clary, J. B. (Editor)

1980-01-01

The validation process comprises the activities required to insure the agreement of system realization with system specification. A preliminary validation methodology for fault tolerant systems documented. A general framework for a validation methodology is presented along with a set of specific tasks intended for the validation of two specimen system, SIFT and FTMP. Two major areas of research are identified. First, are those activities required to support the ongoing development of the validation process itself, and second, are those activities required to support the design, development, and understanding of fault tolerant systems.

40 CFR 180.463 - Quinclorac; tolerances for residues.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the herbicide quinclorac, including its metabolites and degradates, in or on the commodities in the... exemptions. Time-limited tolerances are established for residues of the herbicide quinclorac, including its...

An Evaluation of the Applicability of Damage Tolerance to Dynamic Systems

NASA Technical Reports Server (NTRS)

Forth, Scott C.; Le, Dy; Turnberg, Jay

2005-01-01

The Federal Aviation Administration, the National Aeronautics and Space Administration and the aircraft industry have teamed together to develop methods and guidance for the safe life-cycle management of dynamic systems. Based on the success of the United States Air Force damage tolerance initiative for airframe structure, a crack growth based damage tolerance approach is being examined for implementation into the design and management of dynamic systems. However, dynamic systems accumulate millions of vibratory cycles per flight hour, more than 12,000 times faster than an airframe system. If a detectable crack develops in a dynamic system, the time to failure is extremely short, less than 100 flight hours in most cases, leaving little room for error in the material characterization, life cycle analysis, nondestructive inspection and maintenance processes. In this paper, the authors review the damage tolerant design process focusing on uncertainties that affect dynamic systems and evaluate the applicability of damage tolerance on dynamic systems.

Minimal model for tag-based cooperation

NASA Astrophysics Data System (ADS)

Traulsen, Arne; Schuster, Heinz Georg

2003-10-01

Recently, Riolo et al. [Nature (London) 414, 441 (2001)] showed by computer simulations that cooperation can arise without reciprocity when agents donate only to partners who are sufficiently similar to themselves. One striking outcome of their simulations was the observation that the number of tolerant agents that support a wide range of players was not constant in time, but showed characteristic fluctuations. The cause and robustness of these tides of tolerance remained to be explored. Here we clarify the situation by solving a minimal version of the model of Riolo et al. It allows us to identify a net surplus of random changes from intolerant to tolerant agents as a necessary mechanism that produces these oscillations of tolerance, which segregate different agents in time. This provides a new mechanism for maintaining different agents, i.e., for creating biodiversity. In our model the transition to the oscillating state is caused by a saddle node bifurcation. The frequency of the oscillations increases linearly with the transition rate from tolerant to intolerant agents.

TERMINATION OF TOLERANCE TO HUMAN GAMMA GLOBULIN IN MICE BY ANTIGEN AND BACTERIAL LIPOPOLYSACCHARIDE (ENDOTOXIN)

PubMed Central

Chiller, Jacques M.; Weigle, William O.

1973-01-01

Bacterial lipopolysaccharides (endotoxin) allowed the circumvention of the thymus-derived (T) cell helper function otherwise required for the antibody response in mice to human gamma globulin (HGG). In an analogous fashion, the state of tolerance to HGG, existing at a time when bone marrow-derived (B) cells had lost their unresponsiveness, could be terminated by the injection of both immunogenic HGG and endotoxin, but by neither given alone. However, no effect on tolerance to HGG could be observed when this regimen was followed at a time when B cells were tolerant. After the spontaneous recovery from tolerance in B cells, it seemed that specific priming was occurring in that population. This phenomenon was observed either by the injection of endotoxin and HGG or by the adoptive transfer of cells into irradiated hosts. These data have been discussed in the light of potential autoimmune manifestations that could theoretically follow a simultaneous gram-negative bacterial infection along with a release of self-antigen. PMID:4120288

A fault-tolerant intelligent robotic control system

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.; Tso, Kam Sing

1993-01-01

This paper describes the concept, design, and features of a fault-tolerant intelligent robotic control system being developed for space and commercial applications that require high dependability. The comprehensive strategy integrates system level hardware/software fault tolerance with task level handling of uncertainties and unexpected events for robotic control. The underlying architecture for system level fault tolerance is the distributed recovery block which protects against application software, system software, hardware, and network failures. Task level fault tolerance provisions are implemented in a knowledge-based system which utilizes advanced automation techniques such as rule-based and model-based reasoning to monitor, diagnose, and recover from unexpected events. The two level design provides tolerance of two or more faults occurring serially at any level of command, control, sensing, or actuation. The potential benefits of such a fault tolerant robotic control system include: (1) a minimized potential for damage to humans, the work site, and the robot itself; (2) continuous operation with a minimum of uncommanded motion in the presence of failures; and (3) more reliable autonomous operation providing increased efficiency in the execution of robotic tasks and decreased demand on human operators for controlling and monitoring the robotic servicing routines.

Injury tolerance of tibia for the car-pedestrian impact.

PubMed

Mo, Fuhao; Arnoux, Pierre Jean; Jure, Jean Jaques; Masson, Catherine

2012-05-01

Lower limbs are normally the first contacted body region during car-pedestrian accidents, and easily suffer serious injuries. The previous tibia bending tolerances for pedestrian safety were mainly developed from three-point bending tests on tibia mid-shaft. The tibia tolerances of other locations are still not investigated enough. In addition, tibia loading condition under the car-pedestrian impact should be explored to compare with the three-point bending. This work aims to investigate the injury tolerance of tibia fracture with combined experimental data and numerical simulation. Eleven new reported quasi-static bending tests of tibia mid-shaft, and additional eleven dynamic mid-shaft bending test results in the previous literature were used to define injury risk functions. Furthermore, to investigate the influence of tibia locations on bending tolerance, finite element simulations with lower limb model were implemented according to three-point bending and pedestrian impact conditions. The regressive curve of tibia bending tolerance was obtained from the simulations on the different impact locations, and indicated that tibia fracture tolerance could vary largely due to the impact locations for the car-pedestrian crash. Copyright © 2011 Elsevier Ltd. All rights reserved.

Review of recent transgenic studies on abiotic stress tolerance and future molecular breeding in potato.

PubMed

Kikuchi, Akira; Huynh, Huu Duc; Endo, Tsukasa; Watanabe, Kazuo

2015-03-01

Global warming has become a major issue within the last decade. Traditional breeding programs for potato have focused on increasing productivity and quality and disease resistance, thus, modern cultivars have limited tolerance of abiotic stresses. The introgression of abiotic stress tolerance into modern cultivars is essential work for the future. Recently, many studies have investigated abiotic stress using transgenic techniques. This manuscript focuses on the study of abiotic stress, in particular drought, salinity and low temperature, during this century. Dividing studies into these three stress categories for this review was difficult. Thus, based on the study title and the transgene property, transgenic studies were classified into five categories in this review; oxidative scavengers, transcriptional factors, and above three abiotic categories. The review focuses on studies that investigate confer of stress tolerance and the identification of responsible factors, including wild relatives. From a practical application perspective, further evaluation of transgenic potato with abiotic stress tolerance is required. Although potato plants, including wild species, have a large potential for abiotic stress tolerance, exploration of the factors responsible for conferring this tolerance is still developing. Molecular breeding, including genetic engineering and conventional breeding using DNA markers, is expected to develop in the future.

Zinc and copper tolerance of Agrostis stolonifera L. in tissue culture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, L.; Antonovics, J.

1978-03-01

Callus tissue was induced from shoot meristematic tissue and root tips of a clone of the grass Agrostis stolonifera tolerant to both zinc and copper, and from a control clone tolerant to neither metal. Growth of the callus tissue on media containing zinc and copper showed that tolerance to both metals was maintained in tissue culture. The pattern of metal uptake in tissue culture resembled uptake by whole plants in that tolerant tissue took up more metal than nontolerant tissue. Plants regenerated from callus had the same copper and zinc tolerance as the original parental clones regardless of time ofmore » growth in tissue culture and shoot or root origin of the tissue. The results support previous evidence that metal tolerance is genetically determined and acts at the cellular level.« less

Parallel implementation of all-digital timing recovery for high-speed and real-time optical coherent receivers.

PubMed

Zhou, Xian; Chen, Xue

2011-05-09

The digital coherent receivers combine coherent detection with digital signal processing (DSP) to compensate for transmission impairments, and therefore are a promising candidate for future high-speed optical transmission system. However, the maximum symbol rate supported by such real-time receivers is limited by the processing rate of hardware. In order to cope with this difficulty, the parallel processing algorithms is imperative. In this paper, we propose a novel parallel digital timing recovery loop (PDTRL) based on our previous work. Furthermore, for increasing the dynamic dispersion tolerance range of receivers, we embed a parallel adaptive equalizer in the PDTRL. This parallel joint scheme (PJS) can be used to complete synchronization, equalization and polarization de-multiplexing simultaneously. Finally, we demonstrate that PDTRL and PJS allow the hardware to process 112 Gbit/s POLMUX-DQPSK signal at the hundreds MHz range. © 2011 Optical Society of America

[Obesity and work: an emerging problem].

PubMed

Capodaglio, Paolo; Capodaglio, Edda Maria; Precilios, Helmer; Vismara, Luca; Tacchini, Elena; Finozzi, Enrico; Brunani, Amelia

2011-01-01

In Italy, 42.5% of adult males is overweight and 10.5% obese, while 26.6% of the women is overweight and 9.1% obese. The economical consequences of a growing number of obese workers are relevant: obesity is associated to reduced participation to productive life, increased absenteeism, disability and need for health care, lower salaries, negative impact on productivity. The obese worker is characterized by reduced tolerance to effort, limited range of motion at spinal and joints level, reduced muscle strength normalized per body weight, lower tolerance to prolonged postures, reduced balance and overall reduced work capacity linear to the increase of body mass index. The present article reviews the most evident relationships between work factors (stress, musculoskeletal disorders, etc.) and obesity and speculates about possible interventions to prevent occupational issues for obese workers.

Tolerant compressed sensing with partially coherent sensing matrices

NASA Astrophysics Data System (ADS)

Birnbaum, Tobias; Eldar, Yonina C.; Needell, Deanna

2017-08-01

Most of compressed sensing (CS) theory to date is focused on incoherent sensing, that is, columns from the sensing matrix are highly uncorrelated. However, sensing systems with naturally occurring correlations arise in many applications, such as signal detection, motion detection and radar. Moreover, in these applications it is often not necessary to know the support of the signal exactly, but instead small errors in the support and signal are tolerable. Despite the abundance of work utilizing incoherent sensing matrices, for this type of tolerant recovery we suggest that coherence is actually beneficial . We promote the use of coherent sampling when tolerant support recovery is acceptable, and demonstrate its advantages empirically. In addition, we provide a first step towards theoretical analysis by considering a specific reconstruction method for selected signal classes.

Integrated polarization beam splitter with relaxed fabrication tolerances.

PubMed

Pérez-Galacho, D; Halir, R; Ortega-Moñux, A; Alonso-Ramos, C; Zhang, R; Runge, P; Janiak, K; Bach, H-G; Steffan, A G; Molina-Fernández, Í

2013-06-17

Polarization handling is a key requirement for the next generation of photonic integrated circuits (PICs). Integrated polarization beam splitters (PBS) are central elements for polarization management, but their use in PICs is hindered by poor fabrication tolerances. In this work we present a fully passive, highly fabrication tolerant polarization beam splitter, based on an asymmetrical Mach-Zehnder interferometer (MZI) with a Si/SiO(2) Periodic Layer Structure (PLS) on top of one of its arms. By engineering the birefringence of the PLS we are able to design the MZI arms so that sensitivities to the most critical fabrication errors are greatly reduced. Our PBS design tolerates waveguide width variations of 400nm maintaining a polarization extinction ratio better than 13dB in the complete C-Band.

Effects of coffee consumption on gut recovery after surgery of gynecological cancer patients: a randomized controlled trial.

PubMed

Güngördük, Kemal; Özdemir, İsa Aykut; Güngördük, Özgü; Gülseren, Varol; Gokçü, Mehmet; Sancı, Muzaffer

2017-02-01

Paralytic ileus that develops after elective surgery is a common and uncomfortable complication and is considered inevitable after an intraperitoneal operation. The purpose of this study was to investigate whether coffee consumption accelerates the recovery of bowel function after complete staging surgery of gynecologic cancers. In this randomized controlled trial, 114 patients were allocated preoperatively to either postoperative coffee consumption with 3 times daily (n=58) or routine postoperative care without coffee consumption (n=56). Total abdominal hysterectomy and bilateral salpingo-oophorectomy with systematic pelvic and paraaortic lymphadenectomy were performed on all patients as part of complete staging surgery for endometrial, ovarian, cervical, or tubal cancer. The primary outcome measure was the time to the first passage of flatus after surgery. Secondary outcomes were the time to first defecation, time to first bowel movement, and time to tolerance of a solid diet. The mean time to flatus (30.2±8.0 vs 40.2±12.1 hours; P<.001), mean time to defecation (43.1±9.4 vs 58.5±17.0 hours; P<.001), and mean time to the ability to tolerate food (3.4±1.2 vs 4.7±1.6 days; P<.001) were reduced significantly in patients who consumed coffee compared with control subjects. Mild ileus symptoms were observed in 17 patients (30.4%) in the control group compared with 6 patients (10.3%) in the coffee group (P=.01). Coffee consumption was well-tolerated and well-accepted by patients, and no intervention-related side-effects were observed. Coffee consumption after total abdominal hysterectomy and systematic paraaortic lymphadenectomy expedites the time to bowel motility and the ability to tolerate food. This simple, cheap, and well-tolerated treatment should be added as an adjunct to the postoperative care of gynecologic oncology patients. Copyright © 2016 Elsevier Inc. All rights reserved.

Secularism, Multiculturalism and Same-Sex Marriage: A Comment on Brenda Almond's "Education for Tolerance"

ERIC Educational Resources Information Center

Blum, Lawrence

2010-01-01

Although Almond argues that the contemporary West has lost touch with the value of tolerance, I argue that that value applied to those of different religions and sexual orientations is too minimal a standard for a pluralistic society. I suggest, in the spirit of the work of Charles Taylor and Tariq Modood, the more robust standard of respect and…

An argument for intolerance.

PubMed

Catherwood, J F

2000-12-01

"Multiculturalism", "pluralism" and "tolerance" have become buzz words in applied ethics. While serious and well thought out work is going on in these areas, a misunderstanding of the importance of tolerance, and the difficulties raised by multicultural moral conflict seems common. In this paper I argue that intolerance of some cultural traditions is morally required, and suggest that the forging of a moral mono-culture is preferable to pluralism.

Dissecting Tissue-Specific Transcriptomic Responses from Leaf and Roots under Salt Stress in Petunia hybrida Mitchell

PubMed Central

Villarino, Gonzalo H.; Hu, Qiwen; Scanlon, Michael J.; Mueller, Lukas; Mattson, Neil S.

2017-01-01

One of the primary objectives of plant biotechnology is to increase resistance to abiotic stresses, such as salinity. Salinity is a major abiotic stress and increasing crop resistant to salt continues to the present day as a major challenge. Salt stress disturbs cellular environment leading to protein misfolding, affecting normal plant growth and causing agricultural losses worldwide. The advent of state-of-the-art technologies such as high throughput mRNA sequencing (RNA-seq) has revolutionized whole-transcriptome analysis by allowing, with high precision, to measure changes in gene expression. In this work, we used tissue-specific RNA-seq to gain insight into the Petunia hybrida transcriptional responses under NaCl stress using a controlled hydroponic system. Roots and leaves samples were taken from a continuum of 48 h of acute 150 mM NaCl. This analysis revealed a set of tissue and time point specific differentially expressed genes, such as genes related to transport, signal transduction, ion homeostasis as well as novel and undescribed genes, such as Peaxi162Scf00003g04130 and Peaxi162Scf00589g00323 expressed only in roots under salt stress. In this work, we identified early and late expressed genes in response to salt stress while providing a core of differentially express genes across all time points and tissues, including the trehalose-6-phosphate synthase 1 (TPS1), a glycosyltransferase reported in salt tolerance in other species. To test the function of the novel petunia TPS1 allele, we cloned and showed that TPS1 is a functional plant gene capable of complementing the trehalose biosynthesis pathway in a yeast tps1 mutant. The list of candidate genes to enhance salt tolerance provided in this work constitutes a major effort to better understand the detrimental effects of salinity in petunia with direct implications for other economically important Solanaceous species. PMID:28771200

Involvement of ascorbate peroxidase and heat shock proteins on citrus tolerance to combined conditions of drought and high temperatures.

PubMed

Balfagón, Damián; Zandalinas, Sara I; Baliño, Pablo; Muriach, María; Gómez-Cadenas, Aurelio

2018-06-01

Usually several environmental stresses occur in nature simultaneously causing a unique plant response. However, most of the studies until now have focused in individually-applied abiotic stress conditions. Carrizo citrange (Poncirus trifoliata L. Raf. X Citrus sinensis L. Osb.) and Cleopatra mandarin (Citrus reshni Hort. ex Tan.) are two citrus rootstocks with contrasting tolerance to drought and heat stress and have been used in this work as a model for the study of plant tolerance to the combination of drought and high temperatures. According to our results, leaf integrity and photosynthetic machinery are less affected in Carrizo than in Cleopatra under combined conditions of drought and heat stress. The pattern of accumulation of three proteins (APX, HSP101 and HSP17.6) involved in abiotic stress tolerance shows that they do not accumulate under water stress conditions individually applied. However, contents of APX and HSP101 are higher in Carrizo than in Cleopatra under stress combination whereas HSP17.6 has a similar behavior in both types of plants. This, together with a better stomatal control and a higher APX activity of Carrizo, contributes to the higher tolerance of Carrizo plants to the combination of stresses and point to it as a better rootstock than Cleopatra (traditionally used in areas with scare water supplies) under the predictable future climatic conditions with frequent periods of drought combined with high temperatures. This work also provides the basis for testing the tolerance of different citrus varieties grafted on these rootstocks and growing under different field conditions. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Using growth-based methods to determine direct effects of salinity on soil microbial communities

NASA Astrophysics Data System (ADS)

Rath, Kristin; Rousk, Johannes

2015-04-01

Soil salinization is a widespread agricultural problem and increasing salt concentrations in soils have been found to be correlated with decreased microbial activity. A central challenge in microbial ecology is to link environmental factors, such as salinity, to responses in the soil microbial community. That is, it can be difficult to distinguish direct from indirect effects. In order to determine direct salinity effects on the community we employed the ecotoxicological concept of Pollution-Induced Community Tolerance (PICT). This concept is built on the assumption that if salinity had an ecologically relevant effect on the community, it should have selected for more tolerant species and strains, resulting in an overall higher community tolerance to salt in communities from saline soils. Growth-based measures, such as the 3H-leucine incorporation into bacterial protein , provide sensitive tools to estimate community tolerance. They can also provide high temporal resolution in tracking changes in tolerance over time. In our study we used growth-based methods to investigate: i) at what levels of salt exposure and over which time scales salt tolerance can be induced in a non-saline soil, and (ii) if communities from high salinity sites have higher tolerance to salt exposure along natural salinity gradients. In the first part of the study, we exposed a non-saline soil to a range of salinities and monitored the development of community tolerance over time. We found that community tolerance to intermediate salinities up to around 30 mg NaCl per g soil can be induced at relatively short time scales of a few days, providing evidence that microbial communities can adapt rapidly to changes in environmental conditions. In the second part of the study we used soil samples originating from natural salinity gradients encompassing a wide range of salinity levels, with electrical conductivities ranging from 0.1 dS/m to >10 dS/m. We assessed community tolerance to salt by measuring the bacterial growth response to added NaCl in a soil suspension. The bacterial community tolerance to salt increased along the salt gradients with higher in situ soil salinity. In samples from the low-saline end of the gradient, bacterial growth rates in the soil suspension showed a clear concentration-response relationship to NaCl resulting in inhibition curves. This relationship gradually changed toward higher salt concentrations. In soil samples from high salinity sites, bacterial growth was no longer inhibited by adding high concentrations of NaCl to the bacterial soil suspension. In fact, adding NaCl even promoted bacterial growth rates. These results show that salinity played an ecologically significant role in shaping communities at the highly saline end of the gradients and provide evidence for a direct salt effect on the microbial community

Association of late-night carbohydrate intake with glucose tolerance among pregnant African American women.

PubMed

Chandler-Laney, Paula C; Schneider, Camille R; Gower, Barbara A; Granger, Wesley M; Mancuso, Melissa S; Biggio, Joseph R

2016-10-01

Obesity and late-night food consumption are associated with impaired glucose tolerance. Late-night carbohydrate consumption may be particularly detrimental during late pregnancy because insulin sensitivity declines as pregnancy progresses. Further, women who were obese (Ob) prior to pregnancy have lower insulin sensitivity than do women of normal weight (NW). The aim of this study is to test the hypothesis that night-time carbohydrate consumption is associated with poorer glucose tolerance in late pregnancy and that this association would be exacerbated among Ob women. Forty non-diabetic African American women were recruited based upon early pregnancy body mass index (NW, <25 kg m(-2) ; Ob, ≥30 kg m(-2) ). Third trimester free-living dietary intake was assessed by food diary, and indices of glucose tolerance and insulin action were assessed during a 75-g oral glucose tolerance test. Women in the Ob group reported greater average 24-h energy intake (3055 kcal vs. 2415 kcal, P < 0.05). Across the whole cohort, night-time, but not day-time, carbohydrate intake was positively associated with glucose concentrations after the glucose load and inversely associated with early phase insulin secretion (P < 0.05). Multiple linear regression modelling within each weight group showed that the associations among late-night carbohydrate intake, glucose concentrations and insulin secretion were present only in the Ob group. This is the first study to report an association of night-time carbohydrate intake specifically on glucose tolerance and insulin action during pregnancy. If replicated, these results suggest that late-night carbohydrate intake may be a potential target for intervention to improve metabolic health of Ob women in late pregnancy. © 2015 John Wiley & Sons Ltd.

A somatostatin analog improves tilt table tolerance by decreasing splanchnic vascular conductance

PubMed Central

Florian, J. P.; Curren, M. J.; Pawelczyk, J. A.

2012-01-01

Splanchnic hemodynamics and tilt table tolerance were assessed after an infusion of placebo or octreotide acetate, a somatostatin analog whose vascular effects are largely confined to the splanchnic circulation. We hypothesized that reductions in splanchnic blood flow (SpBF) and splanchnic vascular conductance (SpVC) would be related to improvements in tilt table tolerance. In randomized, double-blind, crossover trials, hemodynamic variables were collected in 14 women and 16 men during baseline, 70° head-up tilt (HUT), and recovery. A repeated-measures analysis of variance was used to compare changes from baseline with respect to sex and condition. HUT elicited an increase in heart rate and decreases in mean arterial pressure, cardiac index, stroke index, and systemic vascular conductance. Additionally, SpVC and non-SpVC were lower during HUT. Octreotide reduced SpBF and SpVC and increased systemic vascular conductance and non-SpVC. Changes in SpBF and SpVC between supine and HUT were smaller in women (P < 0.05). Tilt table tolerance was increased after administration of octreotide [median tilt time: 15.7 vs. 37.0 min (P < 0.05) and 21.8 vs. 45.0 min (P < 0.05) for women and men, respectively]. A significant relationship existed between change (Δ) in SpBF (placebo-octreotide) and Δtilt time in women (Δtilt time = 2.5–0.0083 ΔSpBF, P < 0.01), but not men (Δtilt time = 3.41–0.0008 ΔSpBF, P = 0.59). In conclusion, administration of octreotide acetate improved tilt table tolerance, which was associated with a decrease in SpVC. In women, but not men, the magnitude of reduction in SpBF was positively associated with improvements in tilt tolerance. PMID:22345429

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perko, Z; Bortfeld, T; Hong, T

Purpose: The safe use of radiotherapy requires the knowledge of tolerable organ doses. For experimental fractionation schemes (e.g. hypofractionation) these are typically extrapolated from traditional fractionation schedules using the Biologically Effective Dose (BED) model. This work demonstrates that using the mean dose in the standard BED equation may overestimate tolerances, potentially leading to unsafe treatments. Instead, extrapolation of mean dose tolerances should take the spatial dose distribution into account. Methods: A formula has been derived to extrapolate mean physical dose constraints such that they are mean BED equivalent. This formula constitutes a modified BED equation where the influence of themore » spatial dose distribution is summarized in a single parameter, the dose shape factor. To quantify effects we analyzed 14 liver cancer patients previously treated with proton therapy in 5 or 15 fractions, for whom also photon IMRT plans were available. Results: Our work has two main implications. First, in typical clinical plans the dose distribution can have significant effects. When mean dose tolerances are extrapolated from standard fractionation towards hypofractionation they can be overestimated by 10–15%. Second, the shape difference between photon and proton dose distributions can cause 30–40% differences in mean physical dose for plans having the same mean BED. The combined effect when extrapolating proton doses to mean BED equivalent photon doses in traditional 35 fraction regimens resulted in up to 7–8 Gy higher doses than when applying the standard BED formula. This can potentially lead to unsafe treatments (in 1 of the 14 analyzed plans the liver mean dose was above its 32 Gy tolerance). Conclusion: The shape effect should be accounted for to avoid unsafe overestimation of mean dose tolerances, particularly when estimating constraints for hypofractionated regimens. In addition, tolerances established for a given treatment modality cannot necessarily be applied to other modalities with drastically different dose distributions.« less

76 FR 81393 - Extension of Tolerances for Emergency Exemptions (Multiple Chemicals)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-28

... Orange Rust (Puccinia kuehnii) on sugarcane in Florida. This regulation extends time-limited tolerances... section 18 the use of the fungicide, pyraclostrobin for control of Orange Rust (Puccinia kuehnii) on...

A single bout of high-intensity interval exercise and work-matched moderate-intensity exercise has minimal effect on glucose tolerance and insulin sensitivity in 7- to 10-year-old boys.

PubMed

Cockcroft, Emma J; Williams, Craig A; Jackman, Sarah R; Bassi, Shikhar; Armstrong, Neil; Barker, Alan R

2018-01-01

The purpose of this study was to assess the acute effect of high-intensity interval exercise (HIIE) and moderate-intensity exercise (MIE) on glucose tolerance, insulin sensitivity and fat oxidation in young boys. Eleven boys (8.8 ± 0.8 y) completed three conditions: 1) HIIE; 2) work-matched MIE; and 3) rest (CON) followed by an oral glucose tolerance test (OGTT) to determine glucose tolerance and insulin sensitivity (Cederholm index). Fat oxidation was measured following the OGTT using indirect calorimetry. There was no effect for condition on plasma [glucose] and [insulin] area under the curve (AUC) responses following the OGTT (P > 0.09). However, there was a "trend" for a condition effect for insulin sensitivity with a small increase after HIIE (P = 0.04, ES = 0.28, 9.7%) and MIE (P = 0.07, ES = 0.21, 6.5%) compared to CON. There was an increase in fat oxidation AUC following HIIE (P = 0.008, ES = 0.79, 38.9%) compared to CON, but with no differences between MIE and CON and HIIE and MIE (P > 0.13). In conclusion, 7- to 10-year-old boys may have limited scope to improve insulin sensitivity and glucose tolerance after a single bout of HIIE and MIE. However, fat oxidation is augmented after HIIE but not MIE.

Longitudinal Studies of a B Cell Derived Signature of Tolerance in Renal Transplant Recipients

PubMed Central

Newell, Kenneth A.; Asare, Adam; Sanz, Ignacio; Wei, Chungwen; Rosenberg, Alexander; Gao, Zhong; Kanaparthi, Sai; Asare, Smita; Lim, Noha; Stahly, Michael; Howell, Michael; Knechtle, Stuart; Kirk, Allan; Marks, William H.; Kawai, Tatsuo; Spitzer, Thomas; Tolkoff-Rubin, Nina; Sykes, Megan; Sachs, David H.; Cosimi, A. Benedict; Burlingham, William J.; Phippard, Deborah; Turka, Laurence A.

2016-01-01

Biomarkers of transplant tolerance would enhance the safety and feasibility of clinical tolerance trials and potentially facilitate management of patients receiving immunosuppression. To this end, we examined blood from spontaneously tolerant renal transplant recipients and patients enrolled in two interventional tolerance trials using flow cytometry and gene expression profiling. Using a previously reported tolerant cohort as well as newly identified tolerant patients we confirmed our previous finding that tolerance was associated with increased expression of B cell-associated genes relative to immunosuppressed patients. This was not accounted for merely by an increase in total B cell numbers, but was associated with the increased frequencies of transitional and naïve B cells. Moreover, serial measurements of gene expression demonstrated that this pattern persisted over several years although patients receiving immunosuppression also displayed an increase in the two most dominant tolerance-related B cell genes, IGKV1D-13 and IGLL-1, over time. Importantly, patients rendered tolerant via induction of transient mixed chimerism, and those weaned to minimal immunosuppression, showed similar increases in IGKV1D-13 as did spontaneously tolerant individuals. Collectively, these findings support the notion that alterations in B cells may be a common theme for tolerant kidney transplant recipients, and a useful monitoring tool in prospective trials. PMID:26461968

A community-based event delivery protocol in publish/subscribe systems for delay tolerant sensor networks.

PubMed

Liu, Nianbo; Liu, Ming; Zhu, Jinqi; Gong, Haigang

2009-01-01

The basic operation of a Delay Tolerant Sensor Network (DTSN) is to finish pervasive data gathering in networks with intermittent connectivity, while the publish/subscribe (Pub/Sub for short) paradigm is used to deliver events from a source to interested clients in an asynchronous way. Recently, extension of Pub/Sub systems in DTSNs has become a promising research topic. However, due to the unique frequent partitioning characteristic of DTSNs, extension of a Pub/Sub system in a DTSN is a considerably difficult and challenging problem, and there are no good solutions to this problem in published works. To ad apt Pub/Sub systems to DTSNs, we propose CED, a community-based event delivery protocol. In our design, event delivery is based on several unchanged communities, which are formed by sensor nodes in the network according to their connectivity. CED consists of two components: event delivery and queue management. In event delivery, events in a community are delivered to mobile subscribers once a subscriber comes into the community, for improving the data delivery ratio. The queue management employs both the event successful delivery time and the event survival time to decide whether an event should be delivered or dropped for minimizing the transmission overhead. The effectiveness of CED is demonstrated through comprehensive simulation studies.

Ensemble yield simulations: Using heat-tolerant and later-maturing varieties to adapt to climate warming.

PubMed

Zhang, Yi; Zhao, Yanxia

2017-01-01

The use of modern crop varieties is a dominant method of obtaining high yields in crop production. Efforts to identify suitable varieties, with characteristics that would increase crop yield under future climate conditions, remain essential to developing sustainable agriculture and food security. This work aims to evaluate potential genotypic adaptations (i.e., using varieties with increased ability to produce desirable grain numbers under high temperatures and with enhanced thermal time requirements during the grain-filling period) to cope with the negative impacts of climate change on maize yield. The contributions of different options were investigated at six sites in the North China Plain using the APSIM model and the outputs of 8 GCMs under RCP4.5 scenarios. It was found that without considering adaptation options, mean maize yield would decrease by 7~18% during 2010-2039 relative to 1976-2005. A large decrease in grain number relative to stabilized grain weight decreased maize yield under future climate scenarios. Using heat-tolerant varieties, maize yield could increase on average by 6% to 10%. Using later maturing varieties, e.g., enhanced thermal time requirements during the grain-filling period, maize yield could increase by 7% to 10%. The optimal adaptation options were site specific.

A game-theoretic approach to optimize ad hoc networks inspired by small-world network topology

NASA Astrophysics Data System (ADS)

Tan, Mian; Yang, Tinghong; Chen, Xing; Yang, Gang; Zhu, Guoqing; Holme, Petter; Zhao, Jing

2018-03-01

Nodes in ad hoc networks are connected in a self-organized manner. Limited communication radius makes information transmit in multi-hop mode, and each forwarding needs to consume the energy of nodes. Insufficient communication radius or exhaustion of energy may cause the absence of some relay nodes and links, further breaking network connectivity. On the other hand, nodes in the network may refuse to cooperate due to objective faulty or personal selfish, hindering regular communication in the network. This paper proposes a model called Repeated Game in Small World Networks (RGSWN). In this model, we first construct ad hoc networks with small-world feature by forming "communication shortcuts" between multiple-radio nodes. Small characteristic path length reduces average forwarding times in networks; meanwhile high clustering coefficient enhances network robustness. Such networks still maintain relative low global power consumption, which is beneficial to extend the network survival time. Then we use MTTFT strategy (Mend-Tolerance Tit-for-Tat) for repeated game as a rule for the interactions between neighbors in the small-world networks. Compared with other five strategies of repeated game, this strategy not only punishes the nodes' selfishness more reasonably, but also has the best tolerance to the network failure. This work is insightful for designing an efficient and robust ad hoc network.

Ensemble yield simulations: Using heat-tolerant and later-maturing varieties to adapt to climate warming

PubMed Central

Zhang, Yi

2017-01-01

The use of modern crop varieties is a dominant method of obtaining high yields in crop production. Efforts to identify suitable varieties, with characteristics that would increase crop yield under future climate conditions, remain essential to developing sustainable agriculture and food security. This work aims to evaluate potential genotypic adaptations (i.e., using varieties with increased ability to produce desirable grain numbers under high temperatures and with enhanced thermal time requirements during the grain-filling period) to cope with the negative impacts of climate change on maize yield. The contributions of different options were investigated at six sites in the North China Plain using the APSIM model and the outputs of 8 GCMs under RCP4.5 scenarios. It was found that without considering adaptation options, mean maize yield would decrease by 7~18% during 2010–2039 relative to 1976–2005. A large decrease in grain number relative to stabilized grain weight decreased maize yield under future climate scenarios. Using heat-tolerant varieties, maize yield could increase on average by 6% to 10%. Using later maturing varieties, e.g., enhanced thermal time requirements during the grain-filling period, maize yield could increase by 7% to 10%. The optimal adaptation options were site specific. PMID:28459880

Survey of Verification and Validation Techniques for Small Satellite Software Development

NASA Technical Reports Server (NTRS)

Jacklin, Stephen A.

2015-01-01

The purpose of this paper is to provide an overview of the current trends and practices in small-satellite software verification and validation. This document is not intended to promote a specific software assurance method. Rather, it seeks to present an unbiased survey of software assurance methods used to verify and validate small satellite software and to make mention of the benefits and value of each approach. These methods include simulation and testing, verification and validation with model-based design, formal methods, and fault-tolerant software design with run-time monitoring. Although the literature reveals that simulation and testing has by far the longest legacy, model-based design methods are proving to be useful for software verification and validation. Some work in formal methods, though not widely used for any satellites, may offer new ways to improve small satellite software verification and validation. These methods need to be further advanced to deal with the state explosion problem and to make them more usable by small-satellite software engineers to be regularly applied to software verification. Last, it is explained how run-time monitoring, combined with fault-tolerant software design methods, provides an important means to detect and correct software errors that escape the verification process or those errors that are produced after launch through the effects of ionizing radiation.

Conjugal transferring of resistance gene ptr for improvement of pristinamycin-producing Streptomyces pristinaespiralis.

PubMed

Jin, Zhihua; Jin, Xin; Jin, Qingchao

2010-03-01

Improving pristinamycin production from Streptomyces pristinaespiralis was performed by introducing the resistance gene ptr followed by selection for enhanced tolerance to pristinamycin and fermentation test. To transfer ptr into S. pristinaespiralis, an effective method was established for the first time by using the intergeneric conjugation of DNA from Escherichia coli to S. pristinaespiralis. The procedure was optimized with heat treatment, spore concentration, optimum medium used in conjugation, concentration of MgCl(2), etc. With the optimized conditions, the conjugation frequency was up to 1.36 x 10(-3) exconjugants per recipient. The procedure was used to transfer the ptr gene into S. pristinaespiralis, resulting in 146 exconjugants. These exconjugants were screened on the pristinamycin-resistant plates, and then the fermentation test subsequently. Finally, two strains (SPR1 and SPR2) were obtained with a high yield of 0.11 and 0.15 g/l, respectively, which is about six to eight times more than that of wild-strain ATCC25486. The subculture experiments indicated that the hereditary character of the high-producing S. pristinaespiralis SPR1 and SPR2 was stable. Our work suggests that introducing resistance gene ptr into S. pristinaespiralis could be the way to improve the production of pristinamycin through the enhancement of antibiotic tolerance.

Results of 20- versus 45-min post-infusion scalp cooling time in the prevention of docetaxel-induced alopecia.

PubMed

Komen, Manon M C; Breed, Wim P M; Smorenburg, Carolien H; van der Ploeg, Tjeerd; Goey, S H; van der Hoeven, Jacobus J M; Nortier, Johan W R; van den Hurk, Corina J G

2016-06-01

For patients, chemotherapy-induced alopecia (CIA) is one of the most distressing side effects of treatment. Scalp cooling can prevent or minimise CIA; the results may depend on the duration of cooling. Since a previous study on post-infusion cooling time in patients treated with docetaxel chemotherapy found no difference between 90 and 45 min, we investigated whether hair-preserving results could be maintained with a shorter post-infusion cooling time. In this prospective, multi-centre randomised study, 134 patients who started treatment with docetaxel 75-100 mg/m(2) in a 3-weekly schedule were randomly assigned in a 1:1 ratio to a post-infusion cooling time of 45 or 20 min. The primary end point was the need for a wig or other head covering as assessed by the patient. A visual analogue scale (VAS) with a range from 0 (not tolerable) to 10 (very tolerable) was used to measure tolerance. Scalp cooling results were similar for 45- and 20-min post-infusion cooling times. Thirty-three out of 45 patients (73 %) treated with 20 min of post-infusion cooling did not need a form of head covering, compared with 41 out of 52 patients (79 %) treated with 45 min of post-infusion cooling (p = 0.5). The procedure was well tolerated (mean visual analogue score 8.3). Six patients stopped due to intolerance during the first treatment cycle. A 20-min post-infusion cooling time is effective and tolerable for patients treated with scalp cooling to prevent docetaxel-induced alopecia. Trialregister.nl Identifier, NTR 1856.

Drought tolerance conferred to sugarcane by association with Gluconacetobacter diazotrophicus: a transcriptomic view of hormone pathways.

PubMed

Vargas, Lívia; Santa Brígida, Ailton B; Mota Filho, José P; de Carvalho, Thais G; Rojas, Cristian A; Vaneechoutte, Dries; Van Bel, Michiel; Farrinelli, Laurent; Ferreira, Paulo C G; Vandepoele, Klaas; Hemerly, Adriana S

2014-01-01

Sugarcane interacts with particular types of beneficial nitrogen-fixing bacteria that provide fixed-nitrogen and plant growth hormones to host plants, promoting an increase in plant biomass. Other benefits, as enhanced tolerance to abiotic stresses have been reported to some diazotrophs. Here we aim to study the effects of the association between the diazotroph Gluconacetobacter diazotrophicus PAL5 and sugarcane cv. SP70-1143 during water depletion by characterizing differential transcriptome profiles of sugarcane. RNA-seq libraries were generated from roots and shoots of sugarcane plants free of endophytes that were inoculated with G. diazotrophicus and subjected to water depletion for 3 days. A sugarcane reference transcriptome was constructed and used for the identification of differentially expressed transcripts. The differential profile of non-inoculated SP70-1143 suggests that it responds to water deficit stress by the activation of drought-responsive markers and hormone pathways, as ABA and Ethylene. qRT-PCR revealed that root samples had higher levels of G. diazotrophicus 3 days after water deficit, compared to roots of inoculated plants watered normally. With prolonged drought only inoculated plants survived, indicating that SP70-1143 plants colonized with G. diazotrophicus become more tolerant to drought stress than non-inoculated plants. Strengthening this hypothesis, several gene expression responses to drought were inactivated or regulated in an opposite manner, especially in roots, when plants were colonized by the bacteria. The data suggests that colonized roots would not be suffering from stress in the same way as non-inoculated plants. On the other hand, shoots specifically activate ABA-dependent signaling genes, which could act as key elements in the drought resistance conferred by G. diazotrophicus to SP70-1143. This work reports for the first time the involvement of G. diazotrophicus in the promotion of drought-tolerance to sugarcane cv. SP70-1143, and it describes the initial molecular events that may trigger the increased drought tolerance in the host plant.

Drought Tolerance Conferred to Sugarcane by Association with Gluconacetobacter diazotrophicus: A Transcriptomic View of Hormone Pathways

PubMed Central

Vargas, Lívia; Santa Brígida, Ailton B.; Mota Filho, José P.; de Carvalho, Thais G.; Rojas, Cristian A.; Vaneechoutte, Dries; Van Bel, Michiel; Farrinelli, Laurent; Ferreira, Paulo C. G.; Vandepoele, Klaas; Hemerly, Adriana S.

2014-01-01

Sugarcane interacts with particular types of beneficial nitrogen-fixing bacteria that provide fixed-nitrogen and plant growth hormones to host plants, promoting an increase in plant biomass. Other benefits, as enhanced tolerance to abiotic stresses have been reported to some diazotrophs. Here we aim to study the effects of the association between the diazotroph Gluconacetobacter diazotrophicus PAL5 and sugarcane cv. SP70-1143 during water depletion by characterizing differential transcriptome profiles of sugarcane. RNA-seq libraries were generated from roots and shoots of sugarcane plants free of endophytes that were inoculated with G. diazotrophicus and subjected to water depletion for 3 days. A sugarcane reference transcriptome was constructed and used for the identification of differentially expressed transcripts. The differential profile of non-inoculated SP70-1143 suggests that it responds to water deficit stress by the activation of drought-responsive markers and hormone pathways, as ABA and Ethylene. qRT-PCR revealed that root samples had higher levels of G. diazotrophicus 3 days after water deficit, compared to roots of inoculated plants watered normally. With prolonged drought only inoculated plants survived, indicating that SP70-1143 plants colonized with G. diazotrophicus become more tolerant to drought stress than non-inoculated plants. Strengthening this hypothesis, several gene expression responses to drought were inactivated or regulated in an opposite manner, especially in roots, when plants were colonized by the bacteria. The data suggests that colonized roots would not be suffering from stress in the same way as non-inoculated plants. On the other hand, shoots specifically activate ABA-dependent signaling genes, which could act as key elements in the drought resistance conferred by G. diazotrophicus to SP70-1143. This work reports for the first time the involvement of G. diazotrophicus in the promotion of drought-tolerance to sugarcane cv. SP70-1143, and it describes the initial molecular events that may trigger the increased drought tolerance in the host plant. PMID:25489849

Female acceleration tolerance: effects of menstrual state and physical condition.

PubMed

Heaps, C L; Fischer, M D; Hill, R C

1997-06-01

The literature contains a paucity of information on female tolerance to high sustained acceleration. With women now flying high-performance aircraft, gender-specific factors that may affect female acceleration tolerance have become increasingly important. The purpose of this investigation was to determine how menstrual state and physical condition affect acceleration tolerance. We hypothesized the menstrual cycle would have no effect on acceleration tolerance and that a positive correlation would exist between physical fitness level and tolerance to high sustained acceleration. Centrifuge exposures on 8 female subjects consisted of a relaxed gradual-onset run (0.1 G.s-1) to the visual endpoint, a rapid-onset run (6 G.s-1) to +5 GZ for 15 s, and a +4.5 to +7 GZ simulated aerial combat maneuver (SACM) to physical exhaustion. Acceleration tolerance data were collected at onset of menstruation and 1, 2 and 3 weeks following the onset for two complete menstrual cycles. On separate days, body composition, anaerobic power output and peak oxygen uptake were determined. Retrospective data from 10 male subjects who had performed the +4.5 to +7 GZ SACM were analyzed and compared to these data. Analysis of variance revealed no significant difference in relaxed tolerance or SACM duration between the four selected menstrual cycle time points. Time-to-fatigue on the +4.5 to +7 GZ SACM was positively (p < or = 0.05) correlated with absolute fat-free mass (r = 0.87) and anaerobic power production (r = 0.76) in female subjects. However, when these variables were adjusted for total body mass, the significant correlations no longer existed. No correlation was found between SACM duration and absolute (L min-1) nor relative (ml.kg-1.min-1) aerobic fitness. Time-to-fatigue during the SACM was not significantly different between male and female subjects (250 +/- 97 and 246 +/- 149 s, respectively).

Design of the Protocol Processor for the ROBUS-2 Communication System

NASA Technical Reports Server (NTRS)

Torres-Pomales, Wilfredo; Malekpour, Mahyar R.; Miner, Paul S.

2005-01-01

The ROBUS-2 Protocol Processor (RPP) is a custom-designed hardware component implementing the functionality of the ROBUS-2 fault-tolerant communication system. The Reliable Optical Bus (ROBUS) is the core communication system of the Scalable Processor-Independent Design for Enhanced Reliability (SPIDER), a general-purpose fault tolerant integrated modular architecture currently under development at NASA Langley Research Center. ROBUS is a time-division multiple access (TDMA) broadcast communication system with medium access control by means of time-indexed communication schedule. ROBUS-2 is a developmental version of the ROBUS providing guaranteed fault-tolerant services to the attached processing elements (PEs), in the presence of a bounded number of faults. These services include message broadcast (Byzantine Agreement), dynamic communication schedule update, time reference (clock synchronization), and distributed diagnosis (group membership). ROBUS also features fault-tolerant startup and restart capabilities. ROBUS-2 tolerates internal as well as PE faults, and incorporates a dynamic self-reconfiguration capability driven by the internal diagnostic system. ROBUS consists of RPPs connected to each other by a lower-level physical communication network. The RPP has a pipelined architecture and the design is parameterized in the behavioral and structural domains. The design of the RPP enables the bus to achieve a PE-message throughput that approaches the available bandwidth at the physical layer.

Mechanisms Underlying Tolerance after Long-Term Benzodiazepine Use: A Future for Subtype-Selective GABAA Receptor Modulators?

PubMed Central

Vinkers, Christiaan H.; Olivier, Berend

2012-01-01

Despite decades of basic and clinical research, our understanding of how benzodiazepines tend to lose their efficacy over time (tolerance) is at least incomplete. In appears that tolerance develops relatively quickly for the sedative and anticonvulsant actions of benzodiazepines, whereas tolerance to anxiolytic and amnesic effects probably does not develop at all. In light of this evidence, we review the current evidence for the neuroadaptive mechanisms underlying benzodiazepine tolerance, including changes of (i) the GABAA receptor (subunit expression and receptor coupling), (ii) intracellular changes stemming from transcriptional and neurotrophic factors, (iii) ionotropic glutamate receptors, (iv) other neurotransmitters (serotonin, dopamine, and acetylcholine systems), and (v) the neurosteroid system. From the large variance in the studies, it appears that either different (simultaneous) tolerance mechanisms occur depending on the benzodiazepine effect, or that the tolerance-inducing mechanism depends on the activated GABAA receptor subtypes. Importantly, there is no convincing evidence that tolerance occurs with α subunit subtype-selective compounds acting at the benzodiazepine site. PMID:22536226

Growth under visible light increases conidia and mucilage production and tolerance to UV-B radiation in the plant pathogenic fungus Colletotrichum acutatum.

PubMed

de Menezes, Henrique D; Massola, Nelson S; Flint, Stephan D; Silva, Geraldo J; Bachmann, Luciano; Rangel, Drauzio E N; Braga, Gilberto U L

2015-01-01

Light conditions can influence fungal development. Some spectral wavebands can induce conidial production, whereas others can kill the conidia, reducing the population size and limiting dispersal. The plant pathogenic fungus Colletotrichum acutatum causes anthracnose in several crops. During the asexual stage on the host plant, Colletototrichum produces acervuli with abundant mucilage-embedded conidia. These conidia are responsible for fungal dispersal and host infection. This study examined the effect of visible light during C. acutatum growth on the production of conidia and mucilage and also on the UV tolerance of these conidia. Conidial tolerance to an environmentally realistic UV irradiance was determined both in conidia surrounded by mucilage on sporulating colonies and in conidial suspension. Exposures to visible light during fungal growth increased production of conidia and mucilage as well as conidial tolerance to UV. Colonies exposed to light produced 1.7 times more conidia than colonies grown in continuous darkness. The UV tolerances of conidia produced under light were at least two times higher than conidia produced in the dark. Conidia embedded in the mucilage on sporulating colonies were more tolerant of UV than conidia in suspension that were washed free of mucilage. Conidial tolerance to UV radiation varied among five selected isolates. © 2014 The American Society of Photobiology.

Specific oral tolerance induction in childhood.

PubMed

Peters, Rachel L; Dang, Thanh D; Allen, Katrina J

2016-12-01

Food allergy continues to be a significant public health concern for which there are no approved treatments and management strategies primarily include allergen avoidance and pharmacological measures for accidental exposures. Food allergy is thought to result from either a failure to establish oral tolerance or the breakdown of existing oral tolerance, and therefore, experimental preventative and treatment strategies are now aimed at inducing specific oral tolerance. This may occur in infancy prior to the development of food allergy through the optimal timing of dietary exposure (primary oral tolerance induction) or as a treatment for established food allergy through oral immunotherapy (secondary oral tolerance induction). Trials examining the effectiveness of early dietary allergen exposure to prevent food allergy have yielded promising results for peanut allergy but not so for other allergens, although the results of several trials are yet to be published. Although infant feeding guidelines no longer advise to avoid allergenic foods and exposure to food allergens orally is an important step in inducing food tolerance by the immune system, evidence regarding the optimal timing, dose and form of these foods into the infant's diet is lacking. Likewise, oral immunotherapy trials appear promising for inducing desensitization; however, the long-term efficacy in achieving sustained desensitization and optimal protocols to achieve this is unknown. More research is needed in this emerging field. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

On the use of adaptive multiresolution method with time-varying tolerance for compressible fluid flows

NASA Astrophysics Data System (ADS)

Soni, V.; Hadjadj, A.; Roussel, O.

2017-12-01

In this paper, a fully adaptive multiresolution (MR) finite difference scheme with a time-varying tolerance is developed to study compressible fluid flows containing shock waves in interaction with solid obstacles. To ensure adequate resolution near rigid bodies, the MR algorithm is combined with an immersed boundary method based on a direct-forcing approach in which the solid object is represented by a continuous solid-volume fraction. The resulting algorithm forms an efficient tool capable of solving linear and nonlinear waves on arbitrary geometries. Through a one-dimensional scalar wave equation, the accuracy of the MR computation is, as expected, seen to decrease in time when using a constant MR tolerance considering the accumulation of error. To overcome this problem, a variable tolerance formulation is proposed, which is assessed through a new quality criterion, to ensure a time-convergence solution for a suitable quality resolution. The newly developed algorithm coupled with high-resolution spatial and temporal approximations is successfully applied to shock-bluff body and shock-diffraction problems solving Euler and Navier-Stokes equations. Results show excellent agreement with the available numerical and experimental data, thereby demonstrating the efficiency and the performance of the proposed method.

About problematic peculiarities of Fault Tolerance digital regulation organization

NASA Astrophysics Data System (ADS)

Rakov, V. I.; Zakharova, O. V.

2018-05-01

The solution of problems concerning estimation of working capacity of regulation chains and possibilities of preventing situations of its violation in three directions are offered. The first direction is working out (creating) the methods of representing the regulation loop (circuit) by means of uniting (combining) diffuse components and forming algorithmic tooling for building predicates of serviceability assessment separately for the components and the for regulation loops (circuits, contours) in general. The second direction is creating methods of Fault Tolerance redundancy in the process of complex assessment of current values of control actions, closure errors and their regulated parameters. The third direction is creating methods of comparing the processes of alteration (change) of control actions, errors of closure and regulating parameters with their standard models or their surroundings. This direction allows one to develop methods and algorithmic tool means, aimed at preventing loss of serviceability and effectiveness of not only a separate digital regulator, but also the whole complex of Fault Tolerance regulation.

Specialized microbiome of a halophyte and its role in helping non-host plants to withstand salinity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yuan, Zhilin; Druzhinina, Irina S.; Labbé, Jessy

Root microbiota is a crucial determinant of plant productivity and stress tolerance. Here, we hypothesize that the superior halo-tolerance of seepweed Suaeda salsa is tightly linked to a specialized belowground microbiome. To test this hypothesis, we performed a phylogenetic trait-based framework analysis based on bacterial 16S rRNA gene and fungal nuclear rRNA internal transcribed spacer profiling. Data showed that the dominant α-proteobacteria and γ-proteobacteria communities in bulk soil and root endosphere tend to be phylogenetically clustered and at the same time exhibit phylogenetic over-dispersion in rhizosphere. Likewise, the dominant fungal genera occurred at high phylogenetic redundancy. Interestingly, we found themore » genomes of rhizospheric and endophytic bacteria associated with S. salsa to be enriched in genes contributing to salt stress acclimatization, nutrient solubilization and competitive root colonization. A wide diversity of rhizobacteria with similarity to known halotolerant taxa further supported this interpretation. These findings suggest that an ecological patterned root-microbial interaction strategy has been adopted in S. salsa system to confront soil salinity. We also demonstrated that the potential core microbiome members improve non-host plants growth and salt tolerance. As a result, this work provides a platform to improve plant fitness with halophytes-microbial associates and novel insights into the functions of plant microbiome under salinity.« less

The complex spine: the multidimensional system of causal pathways for low-back disorders.

PubMed

Marras, William S

2012-12-01

The aim of this study was to examine the logic behind the knowledge of low-back problem causal pathways. Low-back pain and low-back disorders (LBDs) continue to represent the major musculoskeletal risk problem in the workplace,with the prevalence and costs of such disorders increasing over time. In recent years, there has been much criticism of the ability of ergonomics methods to control the risk of LBDs. Logical assessment of the systems logic associated with our understanding and prevention of LBDs. Current spine loading as well as spine tolerance research efforts are bringing the field to the point where there is a better systems understanding of the inextricable link between the musculoskeletal system and the cognitive system. Loading is influenced by both the physical environment factors as well as mental demands, whereas tolerances are defined by both physical tissue tolerance and biochemically based tissue sensitivities to pain. However, the logic used in many low-back risk assessment tools may be overly simplistic, given what is understood about causal pathways. Current tools typically assess only load or position in a very cursory manner. Efforts must work toward satisfying both the physical environment and the cognitive environment for the worker if one is to reliably lower the risk of low-back problems. This systems representation of LBD development may serve as a guide to identify gaps in our understanding of LBDs.

Specialized microbiome of a halophyte and its role in helping non-host plants to withstand salinity

DOE PAGES

Yuan, Zhilin; Druzhinina, Irina S.; Labbé, Jessy; ...

2016-08-30

Root microbiota is a crucial determinant of plant productivity and stress tolerance. Here, we hypothesize that the superior halo-tolerance of seepweed Suaeda salsa is tightly linked to a specialized belowground microbiome. To test this hypothesis, we performed a phylogenetic trait-based framework analysis based on bacterial 16S rRNA gene and fungal nuclear rRNA internal transcribed spacer profiling. Data showed that the dominant α-proteobacteria and γ-proteobacteria communities in bulk soil and root endosphere tend to be phylogenetically clustered and at the same time exhibit phylogenetic over-dispersion in rhizosphere. Likewise, the dominant fungal genera occurred at high phylogenetic redundancy. Interestingly, we found themore » genomes of rhizospheric and endophytic bacteria associated with S. salsa to be enriched in genes contributing to salt stress acclimatization, nutrient solubilization and competitive root colonization. A wide diversity of rhizobacteria with similarity to known halotolerant taxa further supported this interpretation. These findings suggest that an ecological patterned root-microbial interaction strategy has been adopted in S. salsa system to confront soil salinity. We also demonstrated that the potential core microbiome members improve non-host plants growth and salt tolerance. As a result, this work provides a platform to improve plant fitness with halophytes-microbial associates and novel insights into the functions of plant microbiome under salinity.« less

Temperature-induced lipocalin (TIL): a shield against stress-inducing environmental shocks in Saccharomyces cerevisiae.

PubMed

Berterame, Nadia Maria; Bertagnoli, Stefano; Codazzi, Vera; Porro, Danilo; Branduardi, Paola

2017-09-01

The yeast Saccharomyces cerevisiae is a well-established workhorse, either for recombinant or natural products, thanks to its natural traits and easily editable metabolism. However, during a bio-based industrial process it meets multiple stresses generated by operative conditions such as non-optimal temperature, pH, oxygenation and product accumulation. The development of tolerant strains is therefore indispensable for the improvement of production, yield and productivity of fermentative processes. In this regard, plants as resilient organisms are a generous source for fishing genes and/or metabolites that can help the cell factory to counteract environmental constraints. Plants possess proteins named temperature-induced lipocalins, TIL, whose levels in the cells correlates with the tolerance to sudden temperature changes and with the scavenging of reactive oxygen species. In this work, the gene encoding for the Arabidopsis thaliana TIL protein was for the first time expressed in S. cerevisiae. The recombinant strain was compared and analysed against the parental counterpart under heat shock, freezing, exposure to organic acid and oxidative agents. In all the tested conditions, TIL expression conferred a higher tolerance to the stress imposed, making this strain a promising candidate for the development of robust cell factories able to overtake the major impairments of industrial processes. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Enhance nisin yield via improving acid-tolerant capability of Lactococcus lactis F44.

PubMed

Zhang, Jian; Caiyin, Qinggele; Feng, Wenjing; Zhao, Xiuli; Qiao, Bin; Zhao, Guangrong; Qiao, Jianjun

2016-06-16

Traditionally, nisin was produced industrially by using Lactococcus lactis in the neutral fermentation process. However, nisin showed higher activity in the acidic environment. How to balance the pH value for bacterial normal growth and nisin activity might be the key problem. In this study, 17 acid-tolerant genes and 6 lactic acid synthetic genes were introduced in L. lactis F44, respectively. Comparing to the 2810 IU/mL nisin yield of the original strain F44, the nisin titer of the engineered strains over-expressing hdeAB, ldh and murG, increased to 3850, 3979 and 4377 IU/mL, respectively. These engineered strains showed more stable intracellular pH value during the fermentation process. Improvement of lactate production could partly provide the extra energy for the expression of acid tolerance genes during growth. Co-overexpression of hdeAB, murG, and ldh(Z) in strain F44 resulted in the nisin titer of 4913 IU/mL. The engineered strain (ABGL) could grow on plates with pH 4.2, comparing to the surviving pH 4.6 of strain F44. The fed-batch fermentation showed nisin titer of the co-expression L. lactis strain could reach 5563 IU/mL with lower pH condition and longer cultivation time. This work provides a novel strategy of constructing robust strains for use in industry process.

Diversity and Evolution of Salt Tolerance in the Genus Vigna

PubMed Central

Iseki, Kohtaro; Takahashi, Yu; Muto, Chiaki; Naito, Ken; Tomooka, Norihiko

2016-01-01

Breeding salt tolerant plants is difficult without utilizing a diversity of wild crop relatives. Since the genus Vigna (family Fabaceae) is comprised of many wild relatives adapted to various environmental conditions, we evaluated the salt tolerance of 69 accessions of this genus, including that of wild and domesticated accessions originating from Asia, Africa, Oceania, and South America. We grew plants under 50 mM and 200 mM NaCl for two weeks and then measured the biomass, relative quantum yield of photosystem II, leaf Na+ concentrations, and leaf K+ concentrations. The accessions were clustered into four groups: the most tolerant, tolerant, moderately susceptible, and susceptible. From the most tolerant group, we selected six accessions, all of which were wild accessions adapted to coastal environments, as promising sources of salt tolerance because of their consistently high relative shoot biomass and relative quantum yield. Interestingly, variations in leaf Na+ concentration were observed between the accessions in the most tolerant group, suggesting different mechanisms were responsible for their salt tolerance. Phylogenetic analysis with nuclear DNA sequences revealed that salt tolerance had evolved independently at least four times in the genus Vigna, within a relatively short period. The findings suggested that simple genetic changes in a few genes might have greatly affected salt tolerances. The elucidation of genetic mechanisms of salt tolerances in the selected accessions may contribute to improving the poor salt tolerance in legume crops. PMID:27736995

Linking waterlogging tolerance with Mn²⁺ toxicity: a case study for barley.

PubMed

Huang, X; Shabala, S; Shabala, L; Rengel, Z; Wu, X; Zhang, G; Zhou, M

2015-01-01

Vast agricultural areas are affected by flooding, causing up to 80% yield reduction and resulting in multibillion dollar losses. Up to now, the focus of plant breeders was predominantly on detrimental effects of anoxia, while other (potentially equally important) traits were essentially neglected; one of these is soil elemental toxicity. Excess water triggers a progressive decrease in soil redox potential, thus increasing the concentration of Mn(2+) that can be toxic to plants if above a specific threshold. This work aimed to quantify the relative contribution of Mn(2+) toxicity to waterlogging stress tolerance, using barley as a case study. Twenty barley (Hordeum vulgare) genotypes contrasting in waterlogging stress tolerance were studied for their ability to cope with toxic (1 mm) amounts of Mn(2+) in the root rhizosphere. Under Mn(2+) toxicity, chlorophyll content of most waterlogging-tolerant genotypes (TX9425, Yerong, CPI-71284-48 and CM72) remained above 60% of the control value, whereas sensitive genotypes (Franklin and Naso Nijo) had 35% less chlorophyll than 35% of controls. Manganese concentration in leaves was not related to visual Mn(2+) toxicity symptoms, suggesting that various Mn(2+) tolerance mechanisms might operate in different tolerant genotypes, i.e. avoidance versus tissue tolerance. The overall significant (r = 0.60) correlation between tolerance to Mn(2+) toxicity and waterlogging in barley suggests that plant breeding for tolerance to waterlogging traits may be advanced by targeting mechanisms conferring tolerance to Mn(2+) toxicity, at least in this species. © 2014 German Botanical Society and The Royal Botanical Society of the Netherlands.

Natural variation underlies alterations in Nramp aluminum transporter (NRAT1) expression and function that play a key role in rice aluminum tolerance

PubMed Central

Li, Jian-Yong; Liu, Jiping; Dong, Dekun; Jia, Xiaomin; McCouch, Susan R.; Kochian, Leon V.

2014-01-01

Aluminum (Al) toxicity is a major constraint for crop production on acid soils which compose ∼40% of arable land in the tropics and subtropics. Rice is the most Al-tolerant cereal crop and offers a good model for identifying Al tolerance genes and mechanisms. Here we investigated natural variation in the rice Nramp aluminum transporter (NRAT1) gene encoding a root plasma membrane Al uptake transporter previously hypothesized to underlie a unique Al tolerance mechanism. DNA sequence variation in the NRAT1 coding and regulatory regions was associated with changes in NRAT1 expression and NRAT1 Al transport properties. These sequence changes resulted in significant differences in Al tolerance that were found to be associated with changes in the Al content of root cell wall and cell sap in 24 representative rice lines from a rice association panel. Expression of the tolerant OsNRAT1 allele in yeast resulted in higher Al uptake than did the sensitive allele and conferred greater Al tolerance when expressed in transgenic Arabidopsis. These findings indicate that NRAT1 plays an important role in rice Al tolerance by reducing the level of toxic Al in the root cell wall and transporting Al into the root cell, where it is ultimately sequestered in the vacuole. Given its ability to enhance Al tolerance in rice and Arabidopsis, this work suggests that the NRAT1 gene or its orthologs may be useful tools for enhancing Al tolerance in a wide range of plant species. PMID:24728832

Issues on human acceleration tolerance after long-duration space flights

NASA Technical Reports Server (NTRS)

Kumar, K. Vasantha; Norfleet, William T.

1992-01-01

This report reviewed the literature on human tolerance to acceleration at 1 G and changes in tolerance after exposure to hypogravic fields. It was found that human tolerance decreased after exposure to hypokinetic and hypogravic fields, but the magnitude of such reduction ranged from 0 to 30 percent for plateau G forces and 30 to 70 percent for time tolerance on sustained G forces. A logistic regression model of the probability of individuals with 25 percent reduction in +Gz tolerance after 1 to 41 days of hypogravic exposures was constructed. The estimated values from the model showed a good correlation with the observed data. A brief review of the need for in-flight centrifuge during long-duration missions was also presented. Review of the available data showed that the use of countermeasures (such as anti-G suits, periodic acceleration, and exercise) reduced the decrement in acceleration tolerance after long-duration space flights. Areas of further research include quantification of the effect of countermeasures on tolerance, and methods to augment tolerance during and after exposures to hypogravic fields. Such data are essential for planning long-duration human missions.

Tolerance of Erythrocytes in Poultry: Induction and Specificity

PubMed Central

Mitchison, N. A.

1962-01-01

Measurement of the rate of elimination of 51Cr-labelled erythrocytes provides a reliable test of immunity in fowls. Chickens can be rendered tolerant of homologous and turkey erythrocytes, as judged by this test, by receiving a series of transfusions of irradiated blood. The series were arranged so that foreign cells remained present in the circulation from the time of hatching. Tolerance induced by this treatment is generally incomplete, but can last indefinitely. In some chickens the manifestation of tolerance of turkey erythrocytes is delayed, probably because of passive transmission of antibody from the dam. Chickens old enough to react against small transfusions of homologous blood can still be rendered tolerant by massive transfusions. Tolerance of the erythrocytes from an individual donor extends only slightly to those from other donors. Tolerance acquired in this way, through transfusion of irradiated blood, stands in contrast to the more stable and complete tolerance that can be acquired through administration of viable cells. Viable cells, on the other hand, provide a less sensitive test, for birds which tolerate skin homografts often eliminate rapidly erythrocytes from the same donor. PMID:14474652

Maize ZmALMT2 is a root anion transporter that mediates constitutive root malate efflux.

PubMed

Ligaba, Ayalew; Maron, Lyza; Shaff, Jon; Kochian, Leon; Piñeros, Miguel

2012-07-01

Root efflux of organic acid anions underlies a major mechanism of plant aluminium (Al) tolerance on acid soils. This efflux is mediated by transporters of the Al-activated malate transporter (ALMT) or the multi-drug and toxin extrusion (MATE) families. ZmALMT2 was previously suggested to be involved in Al tolerance based on joint association-linkage mapping for maize Al tolerance. In the current study, we functionally characterized ZmALMT2 by heterologously expressing it in Xenopus laevis oocytes and transgenic Arabidopsis. In oocytes, ZmALMT2 mediated an Al-independent electrogenic transport product of organic and inorganic anion efflux. Ectopic overexpression of ZmALMT2 in an Al-hypersensitive Arabidopsis KO/KD line lacking the Al tolerance genes, AtALMT1 and AtMATE, resulted in Al-independent constitutive root malate efflux which partially restored the Al tolerance phenotype. The lack of correlation between ZmALMT2 expression and Al tolerance (e.g., expression not localized to the root tip, not up-regulated by Al, and higher in sensitive versus tolerance maize lines) also led us to question ZmALMT2's role in Al tolerance. The functional properties of the ZmALMT2 transporter presented here, along with the gene expression data, suggest that ZmALMT2 is not involved in maize Al tolerance but, rather, may play a role in mineral nutrient acquisition and transport. Published 2011. This article is a U.S. Government work and is in the public domain in the USA.

Furfural tolerance and detoxification mechanism in Candida tropicalis.

PubMed

Wang, Shizeng; Cheng, Gang; Joshua, Chijioke; He, Zijun; Sun, Xinxiao; Li, Ruimin; Liu, Lexuan; Yuan, Qipeng

2016-01-01

Current biomass pretreatment by hydrothermal treatment (including acid hydrolysis, steam explosion, and high-temperature steaming) and ionic liquids generally generate inhibitors to the following fermentation process. Furfural is one of the typical inhibitors generated in hydrothermal treatment of biomass. Furfural could inhibit cell growth rate and decrease biofuel productivity of microbes. Candida tropicalis is a promising microbe for the production of biofuels and value-added chemicals using hemicellulose hydrolysate as carbon source. In this study, C. tropicalis showed a comparable ability of furfural tolerance during fermentation. We investigated the mechanism of C. tropicalis 's robust tolerance to furfural and relevant metabolic responses to obtain more information for metabolic engineering of microbes for efficient lignocellulose fermentation. Candida tropicalis showed comparable intrinsic tolerance to furfural and a fast rate of furfural detoxification. C. tropicalis 's half maximal inhibitory concentration for furfural with xylose as the sole carbon source was 3.69 g/L, which was higher than that of most wild-type microbes reported in the literature to our knowledge. Even though furfural prolonged the lag phase of C. tropicalis , the final biomass in the groups treated with 1 g/L furfural was slightly greater than that in the control groups. By real-time PCR analysis, we found that the expression of ADH1 in C. tropicalis ( ctADH1 ) was induced by furfural and repressed by ethanol after furfural depletion. The expression of ctADH1 could be regulated by both furfural and ethanol. After the disruption of gene ctADH1 , we found that C. tropicalis 's furfural tolerance was weakened. To further confirm the function of ctADH1 and enhance Escherichia coli 's furfural tolerance, ctADH1 was overexpressed in E. coli BL21 (DE3). The rate of furfural degradation in E. coli BL21 (DE3) with pET-ADH1 (high-copy plasmid) and pCS-ADH1 (medium-copy plasmid) was increased by 1.59-fold and 1.28-fold, respectively. Candida tropicalis was a robust strain with intrinsic tolerance to inhibitor furfural. The mechanism of furfural detoxification and metabolic responses were identified by multiple analyses. Alcohol dehydrogenase 1 was confirmed to be responsible for furfural detoxification. C. tropicalis showed a complex regulation system during furfural detoxification to minimize adverse effects caused by furfural. Furthermore, the mechanism we uncovered in this work was successfully applied to enhance E. coli 's furfural tolerance by heterologous expression of ctADH1 . The study provides deeper insights into strain modification for biofuel production by efficient lignocellulose fermentation.

Individual differences in the cortisol-awakening response during the first two years of shift work: A longitudinal study in novice police officers.

PubMed

Lammers-van der Holst, Heidi M; Kerkhof, Gerard A

2015-01-01

Cortisol acts as a critical biological intermediary through which chronic stressors like shift work impact upon multiple physiological, neuro-endocrine and hormonal functions. Therefore, the cortisol awakening response (CAR) is suggested as a prime index of shift work tolerance. Repeated assessments of the CAR (calculated as MnInc) in a group of 25 young novice police officers showed that in the interval between about 4 and 14 months after transitioning from regular day work to rotating shift work, mean values began to rise from baseline to significantly higher levels at about 14 months after they commenced shift work. Visual inspection of the individual trends revealed that a subgroup of 10 subjects followed a monotonically rising trend, whereas another 14 subjects, after an initial rise from about 4-14 months, reverted to a smaller, baseline level cortisol response at about 20 months after the start of shift work. If the initial increase in the cortisol response marks the development of a chronic stress response, the subsequent reversal to baseline levels in the subgroup of 14 participants might be indicative of a process of recovery, possibly the development of shift work tolerance.

Antimicrobial Tolerance of Pseudomonas aeruginosa Biofilms Is Activated during an Early Developmental Stage and Requires the Two-Component Hybrid SagS

PubMed Central

Gupta, Kajal; Marques, Cláudia N. H.; Petrova, Olga E.

2013-01-01

A hallmark characteristic of biofilms is their extraordinary tolerance to antimicrobial agents. While multiple factors are thought to contribute to the high level of antimicrobial tolerance of biofilms, little is known about the timing of induction of biofilm tolerance. Here, we asked when over the course of their development do biofilms gain their tolerance to antimicrobial agents? We demonstrate that in Pseudomonas aeruginosa, biofilm tolerance is linked to biofilm development, with transition to the irreversible attachment stage regulated by the two-component hybrid SagS, marking the timing when biofilms switch to the high-level tolerance phenotype. Inactivation of sagS rendered biofilms but not planktonic cells more susceptible to tobramycin, norfloxacin, and hydrogen peroxide. Moreover, inactivation of sagS also eliminated the recalcitrance of biofilms to killing by bactericidal antimicrobial agents, a phenotype comparable to that observed upon inactivation of brlR, which encodes a MerR-like transcriptional regulator required for biofilm tolerance. Multicopy expression of brlR in a ΔsagS mutant restored biofilm resistance and recalcitrance to killing by bactericidal antibiotics to wild-type levels. In contrast, expression of sagS did not restore the susceptibility phenotype of ΔbrlR mutant biofilms to wild-type levels, indicating that BrlR functions downstream of SagS. Inactivation of sagS correlated with reduced BrlR levels in biofilms, with the produced BrlR being impaired in binding to the previously described BrlR-activated promoters of the two multidrug efflux pump operons mexAB-oprM and mexEF-oprN. Our findings demonstrate that biofilm tolerance is linked to early biofilm development and SagS, with SagS contributing indirectly to BrlR activation. PMID:23995639

Methadone Reverses Analgesic Tolerance Induced by Morphine Pretreatment

PubMed Central

Posa, Luca; Accarie, Alison; Marie, Nicolas

2016-01-01

Background: Opiates such as morphine are the most powerful analgesics, but their protracted use is restrained by the development of tolerance to analgesic effects. Recent works suggest that tolerance to morphine might be due to its inability to promote mu opioid receptor endocytosis, and the co-injection of morphine with a mu opioid receptor internalizing agonist like [D-Ala2,N-Me-Phe4,Gly-ol5]enkephalin reduces tolerance to morphine. So far, no studies have been conducted to evaluate the ability of methadone to reduce morphine tolerance in morphine-pretreated animals, a treatment sequence that could be encountered in opiate rotation protocol. We investigated the ability of methadone (a mu opioid receptor internalizing agonist used in therapy) to reverse morphine tolerance and the associated cellular mechanisms in the periaqueductal gray matter, a region involved in pain control. Methods: We measured analgesic response following a challenge dose of morphine in the hot plate test and investigated regulation of mu opioid receptor (coupling and endocytosis) and some cellular mechanisms involved in tolerance such as adenylate cyclase superactivation and changes in N-methyl-d-aspartate receptor subunits expression and phosphorylation state. Results: A chronic treatment with morphine promoted tolerance to its analgesic effects and was associated with a lack of mu opioid receptor endocytosis, adenylate cyclase overshoot, NR2A and NR2B downregulation, and phosphorylation of NR1. We reported that a methadone treatment in morphine-treated mice reversed morphine tolerance to analgesia by promoting mu opioid receptor endocytosis and blocking cellular mechanisms of tolerance. Conclusions: Our data might lead to rational strategies to tackle opiate tolerance in the frame of opiate rotation. PMID:26390873

Sequoia: A fault-tolerant tightly coupled multiprocessor for transaction processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernstein, P.A.

1988-02-01

The Sequoia computer is a tightly coupled multiprocessor, and thus attains the performance advantages of this style of architecture. It avoids most of the fault-tolerance disadvantages of tight coupling by using a new fault-tolerance design. The Sequoia architecture is similar to other multimicroprocessor architectures, such as those of Encore and Sequent, in that it gives dozens of microprocessors shared access to a large main memory. It resembles the Stratus architecture in its extensive use of hardware fault-detection techniques. It resembles Stratus and Auragen in its ability to quickly recover all processes after a single point failure, transparently to the user.more » However, Sequoia is unique in its combination of a large-scale tightly coupled architecture with a hardware approach to fault tolerance. This article gives an overview of how the hardware architecture and operating systems (OS) work together to provide a high degree of fault tolerance with good system performance.« less

The growth threshold conjecture: a theoretical framework for understanding T-cell tolerance.

PubMed

Arias, Clemente F; Herrero, Miguel A; Cuesta, José A; Acosta, Francisco J; Fernández-Arias, Cristina

2015-07-01

Adaptive immune responses depend on the capacity of T cells to target specific antigens. As similar antigens can be expressed by pathogens and host cells, the question naturally arises of how can T cells discriminate friends from foes. In this work, we suggest that T cells tolerate cells whose proliferation rates remain below a permitted threshold. Our proposal relies on well-established facts about T-cell dynamics during acute infections: T-cell populations are elastic (they expand and contract) and they display inertia (contraction is delayed relative to antigen removal). By modelling inertia and elasticity, we show that tolerance to slow-growing populations can emerge as a population-scale feature of T cells. This result suggests a theoretical framework to understand immune tolerance that goes beyond the self versus non-self dichotomy. It also accounts for currently unexplained observations, such as the paradoxical tolerance to slow-growing pathogens or the presence of self-reactive T cells in the organism.

Physiological, cellular and molecular aspects of the desiccation tolerance in Anadenanthera colubrina seeds during germination.

PubMed

Castro, L E; Guimarães, C C; Faria, J M R

2017-11-01

During germination, orthodox seeds become gradually intolerant to desiccation, and for this reason, they are a good model for recalcitrance studies. In the present work, physiological, biochemical, and ultrastructural aspects of the desiccation tolerance were characterized during the germination process of Anadenanthera colubrina seeds. The seeds were imbibed during zero (control), 2, 8, 12 (no germinated seeds), and 18 hours (germinated seeds with 1 mm protruded radicle); then they were dried for 72 hours, rehydrated and evaluated for survivorship. Along the imbibition, cytometric and ultrastructural analysis were performed, besides the extraction of the heat-stable proteins. Posteriorly to imbibition and drying, the evaluation of ultrastructural damages was performed. Desiccation tolerance was fully lost after root protrusion. There was no increase in 4C DNA content after the loss of desiccation tolerance. Ultrastructural characteristics of cells from 1mm roots resembled those found in the recalcitrant seeds, in both hydrated and dehydrated states. The loss of desiccation tolerance coincided with the reduction of heat-stable proteins.

Expression of Mitochondrial Cytochrome C Oxidase Chaperone Gene (COX20) Improves Tolerance to Weak Acid and Oxidative Stress during Yeast Fermentation

PubMed Central

Kumar, Vinod; Hart, Andrew J.; Keerthiraju, Ethiraju R.; Waldron, Paul R.; Tucker, Gregory A.; Greetham, Darren

2015-01-01

Introduction Saccharomyces cerevisiae is the micro-organism of choice for the conversion of fermentable sugars released by the pre-treatment of lignocellulosic material into bioethanol. Pre-treatment of lignocellulosic material releases acetic acid and previous work identified a cytochrome oxidase chaperone gene (COX20) which was significantly up-regulated in yeast cells in the presence of acetic acid. Results A Δcox20 strain was sensitive to the presence of acetic acid compared with the background strain. Overexpressing COX20 using a tetracycline-regulatable expression vector system in a Δcox20 strain, resulted in tolerance to the presence of acetic acid and tolerance could be ablated with addition of tetracycline. Assays also revealed that overexpression improved tolerance to the presence of hydrogen peroxide-induced oxidative stress. Conclusion This is a study which has utilised tetracycline-regulated protein expression in a fermentation system, which was characterised by improved (or enhanced) tolerance to acetic acid and oxidative stress. PMID:26427054

40 CFR 180.569 - Forchlorfenuron; tolerances for residues.

Code of Federal Regulations, 2013 CFR

2013-07-01

... residues of the plant growth regulator forchlorfenuron; N-(2-chloro-4-pyridinyl)-N′phenyl urea in or on the....06 Kiwifruit 0.04 (2) Time-limited tolerances are established for residues of the plant growth...

40 CFR 180.569 - Forchlorfenuron; tolerances for residues.

Code of Federal Regulations, 2012 CFR

2012-07-01

... residues of the plant growth regulator forchlorfenuron; N-(2-chloro-4-pyridinyl)-N′phenyl urea in or on the....06 Kiwifruit 0.04 (2) Time-limited tolerances are established for residues of the plant growth...

40 CFR 180.569 - Forchlorfenuron; tolerances for residues.

Code of Federal Regulations, 2010 CFR

2010-07-01

... residues of the plant growth regulator forchlorfenuron; N-(2-chloro-4-pyridinyl)-N′phenyl urea in or on the....06 Kiwifruit 0.04 (2) Time-limited tolerances are established for residues of the plant growth...

40 CFR 180.569 - Forchlorfenuron; tolerances for residues.

Code of Federal Regulations, 2011 CFR

2011-07-01

... residues of the plant growth regulator forchlorfenuron; N-(2-chloro-4-pyridinyl)-N′phenyl urea in or on the....06 Kiwifruit 0.04 (2) Time-limited tolerances are established for residues of the plant growth...

Culture, Work, and Deviance: Implications for Rehabilitation Counseling

ERIC Educational Resources Information Center

Jaques, Marceline E.; Hershenson, David B.

1970-01-01

It is concluded that rehabilitaition counseling is most relevant in a cultural context that is sufficiently affluent to tolerate deviance and that has sufficient work role for the counselor. Speculations are made on the counselor's role in a posttechnological culture. (Author)

The Influence of a Personal Values Intervention on Cold Pressor-Induced Distress Tolerance.

PubMed

Smith, Brooke M; Villatte, Jennifer L; Ong, Clarissa W; Butcher, Grayson M; Twohig, Michael P; Levin, Michael E; Hayes, Steven C

2018-06-01

Research has demonstrated that values and acceptance interventions can increase distress tolerance, but the individual contribution of each remains unclear. The current study examined the isolated effect of a values intervention on immersion time in a cold pressor. Participants randomized to Values ( n = 18) and Control ( n = 14) conditions completed two cold pressor tasks, separated by a 30-min values or control intervention. Immersion time increased 51.06 s for participants in the Values condition and decreased by 10.79 s for those in the Control condition. Increases in self-reported pain and distress predicted decreases in immersion time for Control, but not Values, participants. The best-fitting model accounted for 39% of the variance in immersion time change. Results suggest that a brief isolated values exercise can be used to improve distress tolerance despite increased perceptions of pain and distress, such that values alone may be sufficient to facilitate openness to difficult experiences.

Self-stabilizing byzantine-fault-tolerant clock synchronization system and method

NASA Technical Reports Server (NTRS)

Malekpour, Mahyar R. (Inventor)

2012-01-01

Systems and methods for rapid Byzantine-fault-tolerant self-stabilizing clock synchronization are provided. The systems and methods are based on a protocol comprising a state machine and a set of monitors that execute once every local oscillator tick. The protocol is independent of specific application specific requirements. The faults are assumed to be arbitrary and/or malicious. All timing measures of variables are based on the node's local clock and thus no central clock or externally generated pulse is used. Instances of the protocol are shown to tolerate bursts of transient failures and deterministically converge with a linear convergence time with respect to the synchronization period as predicted.

Simulated fault injection - A methodology to evaluate fault tolerant microprocessor architectures

NASA Technical Reports Server (NTRS)

Choi, Gwan S.; Iyer, Ravishankar K.; Carreno, Victor A.

1990-01-01

A simulation-based fault-injection method for validating fault-tolerant microprocessor architectures is described. The approach uses mixed-mode simulation (electrical/logic analysis), and injects transient errors in run-time to assess the resulting fault impact. As an example, a fault-tolerant architecture which models the digital aspects of a dual-channel real-time jet-engine controller is used. The level of effectiveness of the dual configuration with respect to single and multiple transients is measured. The results indicate 100 percent coverage of single transients. Approximately 12 percent of the multiple transients affect both channels; none result in controller failure since two additional levels of redundancy exist.

The administration of psilocybin to healthy, hallucinogen-experienced volunteers in a mock-functional magnetic resonance imaging environment: a preliminary investigation of tolerability.

PubMed

Carhart-Harris, Robin L; Williams, Tim M; Sessa, Ben; Tyacke, Robin J; Rich, Ann S; Feilding, Amanda; Nutt, David J

2011-11-01

This study sought to assess the tolerability of intravenously administered psilocybin in healthy, hallucinogen-experienced volunteers in a mock-magnetic resonance imaging environment as a preliminary stage to a controlled investigation using functional magnetic resonance imaging to explore the effects of psilocybin on cerebral blood flow and activity. The present pilot study demonstrated that up to 2 mg of psilocybin delivered as a slow intravenous injection produces short-lived but typical drug effects that are psychologically and physiologically well tolerated. With appropriate care, this study supports the viability of functional magnetic resonance imaging work with psilocybin.

[Terrorism and mental health (problem's scale, population tolerance, management of care)].

PubMed

Iastrebov, V S

2004-01-01

The consequences of terrorist threat and terrorist acts for mental health of the individual, groups of individuals and community in general are analyzed. Mental disorders emerging in the victims of terrorism is described. The problem of terrorist threats use as a psychic weapon is discussed. Tolerance of population to terrorism can be divided into two types--psychophysiological and socio-psychological. The ways for elevating tolerability to terrorist threat and terrorist acts are suggested. Help in the centers of terrorist act must be of the complex character, being provided by different specialists including psychologists and psychiatrists. The importance of state structures and community support in this work is emphasized.

Age-related Decline of Abiotic Stress Tolerance in Young Drosophila melanogaster Adults.

PubMed

Colinet, Hervé; Chertemps, Thomas; Boulogne, Isabelle; Siaussat, David

2016-12-01

Stress tolerance generally declines with age as a result of functional senescence. Age-dependent alteration of stress tolerance can also occur in early adult life. In Drosophila melanogaster, evidence of such a decline in young adults has only been reported for thermotolerance. It is not known whether early adult life entails a general stress tolerance reduction and whether the response is peculiar to thermal traits. The present work was designed to investigate whether newly eclosed D melanogaster adults present a high tolerance to a range of biotic and abiotic insults. We found that tolerance to most of the abiotic stressors tested (desiccation, paraquat, hydrogen peroxide, deltamethrin, and malathion) was high in newly eclosed adults before dramatically declining over the next days of adult life. No clear age-related pattern was found for resistance to biotic stress (septic or fungal infection) and starvation. These results suggest that newly eclosed adults present a culminating level of tolerance to extrinsic stress which is likely unrelated to immune process. We argue that stress tolerance variation at very young age is likely a residual attribute from the previous life stage (ontogenetic carryover) or a feature related to the posteclosion development. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Plasticity and local adaptation explain lizard cold tolerance.

PubMed

Card, Daren C; Schield, Drew R; Castoe, Todd A

2018-05-01

How does climate variation limit the range of species and what does it take for species to colonize new regions? In this issue of Molecular Ecology, Campbell-Staton et al. () address these broad questions by investigating cold tolerance adaptation in the green anole lizard (Anolis carolinensis) across a latitudinal transect. By integrating physiological data, gene expression data and acclimation experiments, the authors disentangle the mechanisms underlying cold adaptation. They first establish that cold tolerance adaptation in Anolis lizards follows the predictions of the oxygen- and capacity-limited thermal tolerance hypothesis, which states that organisms are limited by temperature thresholds at which oxygen supply cannot meet demand. They then explore the drivers of cold tolerance at a finer scale, finding evidence that northern populations are adapted to cooler thermal regimes and that both phenotypic plasticity and heritable genetic variation contribute to cold tolerance. The integration of physiological and gene expression data further highlights the varied mechanisms that drive cold tolerance adaptation in Anolis lizards, including both supply-side and demand-side adaptations that improve oxygen economy. Altogether, their work provides new insight into the physiological and genetic mechanisms underlying adaptation to new climatic niches and demonstrates that cold tolerance in northern lizard populations is achieved through the synergy of physiological plasticity and local genetic adaptation for thermal performance. © 2018 John Wiley & Sons Ltd.

A robust whole-cell biocatalyst that introduces a thermo- and solvent-tolerant lipase into Aspergillus oryzae cells: characterization and application to enzymatic biodiesel production.

PubMed

Adachi, Daisuke; Koh, FookHee; Hama, Shinji; Ogino, Chiaki; Kondo, Akihiko

2013-05-10

To develop a robust whole-cell biocatalyst that works well at moderately high temperature (40-50°C) with organic solvents, a thermostable lipase from Geobacillus thermocatenulatus (BTL2) was introduced into an Aspergillus oryzae whole-cell biocatalyst. The lipase-hydrolytic activity of the immobilized A. oryzae (r-BTL) was highest at 50°C and was maintained even after an incubation of 24-h at 60°C. In addition, r-BTL was highly tolerant to 30% (v/v) organic solvents (dimethyl carbonate, ethanol, methanol, 2-propanol or acetone). The attractive characteristics of r-BTL also worked efficiently on palm oil methanolysis, resulting in a nearly 100% conversion at elevated temperature from 40 to 50°C. Moreover, r-BTL catalyzed methanolysis at a high methanol concentration without a significant loss of lipase activity. In particular, when 2 molar equivalents of methanol were added 2 times, a methyl ester content of more than 90% was achieved; the yield was higher than those of conventional whole-cell biocatalyst and commercial Candida antarctica lipase (Novozym 435). On the basis of the results regarding the excellent lipase characteristics and efficient biodiesel production, the developed whole-cell biocatalyst would be a promising biocatalyst in a broad range of applications including biodiesel production. Copyright © 2013 Elsevier Inc. All rights reserved.

Study of fault-tolerant software technology

NASA Technical Reports Server (NTRS)

Slivinski, T.; Broglio, C.; Wild, C.; Goldberg, J.; Levitt, K.; Hitt, E.; Webb, J.

1984-01-01

Presented is an overview of the current state of the art of fault-tolerant software and an analysis of quantitative techniques and models developed to assess its impact. It examines research efforts as well as experience gained from commercial application of these techniques. The paper also addresses the computer architecture and design implications on hardware, operating systems and programming languages (including Ada) of using fault-tolerant software in real-time aerospace applications. It concludes that fault-tolerant software has progressed beyond the pure research state. The paper also finds that, although not perfectly matched, newer architectural and language capabilities provide many of the notations and functions needed to effectively and efficiently implement software fault-tolerance.

Investigation, Modeling, and Analysis of Integrated Metroplex Arrival and Departure Coordination Concepts

NASA Technical Reports Server (NTRS)

Clarke, John-Paul B.; Brooks, James; McClain, Evan; Paladhi, Anwesha Roy; Li, Leihong; Schleicher, David; Saraf, Aditya; Timar, Sebastian; Crisp, Don; Bertino, Jason;

Proactive Fault Tolerance Using Preemptive Migration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engelmann, Christian; Vallee, Geoffroy R; Naughton, III, Thomas J

2009-01-01

Proactive fault tolerance (FT) in high-performance computing is a concept that prevents compute node failures from impacting running parallel applications by preemptively migrating application parts away from nodes that are about to fail. This paper provides a foundation for proactive FT by defining its architecture and classifying implementation options. This paper further relates prior work to the presented architecture and classification, and discusses the challenges ahead for needed supporting technologies.

Tissue Tolerable Plasma and Polihexanide: Are Synergistic Effects Possible to Promote Healing of Chronic wounds? In Vivo and In Vitro Results

NASA Astrophysics Data System (ADS)

Bender, Claudia P.; Hübner, Nils-Olaf; Weltmann, Klaus-Dieter; Scharf, Christian; Kramer, Axel

The assumption is that tissue tolerable plasma works as promoter for wound healing and can be beneficially combined with the antiseptic polihexanide to avoid bacterial recolonization. The effects of a combined plasma - polihexanide (PHMB) application on cell integrity, cytotoxicity and its irritative and inflammative potential were tested in vitro and in two dogs in vivo.

The gut-brain interaction in opioid tolerance.

PubMed

Akbarali, Hamid I; Dewey, William L

2017-12-01

The prevailing opioid crisis has necessitated the need to understand mechanisms leading to addiction and tolerance, the major contributors to overdose and death and to develop strategies for developing drugs for pain treatment that lack abuse liability and side-effects. Opioids are commonly used for treatment of pain and symptoms of inflammatory bowel disease. The significant effect of opioids in the gut, both acute and chronic, includes persistent constipation and paradoxically may also worsen pain symptoms. Recent work has suggested a significant role of the gastrointestinal microbiome in behavioral responses to opioids, including the development of tolerance to its pain-relieving effects. In this review, we present current concepts of gut-brain interaction in analgesic tolerance to opioids and suggest that peripheral mechanisms emanating from the gut can profoundly affect central control of opioid function. Copyright © 2017 Elsevier Ltd. All rights reserved.

Design, assembly, and metrology of an oil-immersion microscope objective with long working distance

NASA Astrophysics Data System (ADS)

Peng, Wei-Jei; Lin, Wen-Lung; Kuo, Hui-Jean; Ho, Cheng-Fang; Hsu, Wei-Yao

2016-10-01

The design, tolerance sensitivity reduction, assembly, and optical bench test for an oil-immersion microscope objective with long working distance employed in a lattice light-sheet microscope is presented in this paper. In this application, the orthogonal excitation and detection objectives are dipped in an oil medium. The excitation objective focuses the incident laser beam to generate fluorescence on specimen for collecting by detection objective. The excitation objective is custom-designed to meet the requirement specification such as oil-immersion, the long working distance, and numerical aperture (NA) of 0.5, etc. To produce an acceptable point spread function (PSF) for effective excitation, the performance of the objective needs to be close to diffraction limit. Because the tolerance of the modulation transfer function (MTF) is more and more sensitive at higher spatial frequency, it is extremely critical to keep the performance after manufacture. Consequently, an insensitive optical design is very important for relaxing tolerance. We compare the design with and without tolerance sensitivity reduction, and the as-built MTF shows the result. Furthermore, the method for sensitivity reduction is presented. The opto-mechanical design and assembly method are also discussed. Eventually, the objective with five spherical lenses was fabricated. In optical bench test, the depth of the oil is sensitive to MTF, and it leads to the complicated adjustment. For solving this issue, we made an index-matching lens to replace oil for measurement easily. Finally, the measured MTF of the excitation objective can accomplish the requirement specification and successfully employed in a lattice light-sheet microscope.

Clinical pharmacokinetics of Icotinib, an anti-cancer drug: evaluation of dose proportionality, food effect, and tolerability in healthy subjects.

PubMed

Liu, Dongyang; Jiang, Ji; Zhang, Li; Tan, Fenlai; Wang, Yingxiang; Zhang, Don; Hu, Pei

2014-04-01

Icotinib, an oral epidermal growth factor receptor tyrosine kinase inhibitor, has proved effectiveness in xenografted nude mice. Purpose of the present studies was to investigate tolerability and pharmacokinetics of Icotinib in healthy subjects for the first time, including dose proportionality, food effect, and tolerability. Two studies were conducted in total of 22 healthy subjects: a randomized, two-Latin-square crossover, dose proportional study (n = 12) and a randomized two-way crossover food-effect study (n = 10). Plasma concentration of Icotinib reached peak at a median Tmax of 0.75-3.5 h after single dose and then declined with a mean t1/2β of 6.02-7.83 h. Over the dose range of 100-600 mg, AUC values were proportional to dose and Cmax showed a slight saturation when dose increases. Only 0.2 % of the dose was excreted through kidney in unchanged Icotinib. After dosing 400 mg of Icotinib with high-fat and high-calorie meal, mean Cmax and AUC were significantly increased by 59 and 79 %, respectively. Three subjects experienced four adverse events (rash, increase in AST and ALT, and external injury). Rash and increased levels of AST and ALT were considered as drug-related. No serious adverse events were reported. The current work demonstrated that Icotinib was well tolerated in healthy male subjects (n = 22) over the dose range of 100-600 mg with or without food. Icotinib exposure, expressed in AUC, was proportionally increased with dose over the above dose range. Food intake significantly increased the absorption and exposure of Icotinib in healthy subjects.

Reproductive stage physiological and transcriptional responses to salinity stress in reciprocal populations derived from tolerant (Horkuch) and susceptible (IR29) rice

NASA Astrophysics Data System (ADS)

Razzaque, Samsad; Haque, Taslima; Elias, Sabrina M.; Rahman, Md. Sazzadur; Biswas, Sudip; Schwartz, Scott; Ismail, Abdelbagi M.; Walia, Harkamal; Juenger, Thomas E.; Seraj, Zeba I.

2017-04-01

Global increase in salinity levels has made it imperative to identify novel sources of genetic variation for tolerance traits, especially in rice. The rice landrace Horkuch, endemic to the saline coastal area of Bangladesh, was used in this study as the source of tolerance in reciprocal crosses with the sensitive but high-yielding IR29 variety for discovering transcriptional variation associated with salt tolerance in the resulting populations. The cytoplasmic effect of the Horkuch background in leaves under stress showed functional enrichment for signal transduction, DNA-dependent regulation and transport activities. In roots the enrichment was for cell wall organization and macromolecule biosynthesis. In contrast, the cytoplasmic effect of IR29 showed upregulation of apoptosis and downregulation of phosphorylation across tissues relative to Horkuch. Differential gene expression in leaves of the sensitive population showed downregulation of GO processes like photosynthesis, ATP biosynthesis and ion transport. Roots of the tolerant plants conversely showed upregulation of GO terms like G-protein coupled receptor pathway, membrane potential and cation transport. Furthermore, genes involved in regulating membrane potentials were constitutively expressed only in the roots of tolerant individuals. Overall our work has developed genetic resources and elucidated the likely mechanisms associated with the tolerance response of the Horkuch genotype.

Galactinol synthase transcriptional profile in two genotypes of Coffea canephora with contrasting tolerance to drought

PubMed Central

Santos, Tiago Benedito Dos; de Lima, Rogério Barbosa; Nagashima, Getúlio Takashi; Petkowicz, Carmen Lucia de Oliveira; Carpentieri-Pípolo, Valéria; Pereira, Luiz Filipe Protasio; Domingues, Douglas Silva; Vieira, Luiz Gonzaga Esteves

2015-01-01

Increased synthesis of galactinol and raffinose family oligosaccharides (RFOs) has been reported in vegetative tissues in response to a range of abiotic stresses. In this work, we evaluated the transcriptional profile of a Coffea canephora galactinol synthase gene (CcGolS1) in two clones that differed in tolerance to water deficit in order to assess the contribution of this gene to drought tolerance. The expression of CcGolS1 in leaves was differentially regulated by water deficit, depending on the intensity of stress and the genotype. In clone 109A (drought-susceptible), the abundance of CcGolS1 transcripts decreased upon exposure to drought, reaching minimum values during recovery from severe water deficit and stress. In contrast, CcGolS1 gene expression in clone 14 (drought-tolerant) was stimulated by water deficit. Changes in galactinol and RFO content did not correlate with variation in the steady-state transcript level. However, the magnitude of increase in RFO accumulation was higher in the tolerant cultivar, mainly under severe water deficit. The finding that the drought-tolerant coffee clone showed enhanced accumulation of CcGolS1 transcripts and RFOs under water deficit suggests the possibility of using this gene to improve drought tolerance in this important crop. PMID:26273221

Galactinol synthase transcriptional profile in two genotypes of Coffea canephora with contrasting tolerance to drought.

PubMed

Santos, Tiago Benedito Dos; de Lima, Rogério Barbosa; Nagashima, Getúlio Takashi; Petkowicz, Carmen Lucia de Oliveira; Carpentieri-Pípolo, Valéria; Pereira, Luiz Filipe Protasio; Domingues, Douglas Silva; Vieira, Luiz Gonzaga Esteves

2015-05-01

Increased synthesis of galactinol and raffinose family oligosaccharides (RFOs) has been reported in vegetative tissues in response to a range of abiotic stresses. In this work, we evaluated the transcriptional profile of a Coffea canephora galactinol synthase gene (CcGolS1) in two clones that differed in tolerance to water deficit in order to assess the contribution of this gene to drought tolerance. The expression of CcGolS1 in leaves was differentially regulated by water deficit, depending on the intensity of stress and the genotype. In clone 109A (drought-susceptible), the abundance of CcGolS1 transcripts decreased upon exposure to drought, reaching minimum values during recovery from severe water deficit and stress. In contrast, CcGolS1 gene expression in clone 14 (drought-tolerant) was stimulated by water deficit. Changes in galactinol and RFO content did not correlate with variation in the steady-state transcript level. However, the magnitude of increase in RFO accumulation was higher in the tolerant cultivar, mainly under severe water deficit. The finding that the drought-tolerant coffee clone showed enhanced accumulation of CcGolS1 transcripts and RFOs under water deficit suggests the possibility of using this gene to improve drought tolerance in this important crop.

Dissecting the genetic architecture of frost tolerance in Central European winter wheat.

PubMed

Zhao, Yusheng; Gowda, Manje; Würschum, Tobias; Longin, C Friedrich H; Korzun, Viktor; Kollers, Sonja; Schachschneider, Ralf; Zeng, Jian; Fernando, Rohan; Dubcovsky, Jorge; Reif, Jochen C

2013-11-01

Abiotic stress tolerance in plants is pivotal to increase yield stability, but its genetic basis is still poorly understood. To gain insight into the genetic architecture of frost tolerance, this work evaluated a large mapping population of 1739 wheat (Triticum aestivum L.) lines and hybrids adapted to Central Europe in field trials in Germany and fingerprinted the lines with a 9000 single-nucleotide polymorphism array. Additive effects prevailed over dominance effects. A two-dimensional genome scan revealed the presence of epistatic effects. Genome-wide association mapping in combination with a robust cross-validation strategy identified one frost tolerance locus with a major effect located on chromosome 5B. This locus was not in linkage disequilibrium with the known frost loci Fr-B1 and Fr-B2. The use of the detected diagnostic markers on chromosome 5B, however, does not allow prediction of frost tolerance with high accuracy. Application of genome-wide selection approaches that take into account also loci with small effect sizes considerably improved prediction of the genetic variation of frost tolerance in wheat. The developed prediction model is valuable for improving frost tolerance because this trait displays a wide variation in occurrence across years and is therefore a difficult target for conventional phenotypic selection.

Habituation of Salmonella spp. at Reduced Water Activity and Its Effect on Heat Tolerance

PubMed Central

Mattick, K. L.; Jørgensen, F.; Legan, J. D.; Lappin-Scott, H. M.; Humphrey, T. J.

2000-01-01

The effect of habituation at reduced water activity (aw) on heat tolerance of Salmonella spp. was investigated. Stationary-phase cells were exposed to aw 0.95 in broths containing glucose-fructose, sodium chloride, or glycerol at 21°C for up to a week prior to heat challenge at 54°C. In addition, the effects of different aws and heat challenge temperatures were investigated. Habituation at aw 0.95 resulted in increased heat tolerance at 54°C with all solutes tested. The extent of the increase and the optimal habituation time depended on the solute used. Exposure to broths containing glucose-fructose (aw 0.95) for 12 h resulted in maximal heat tolerance, with more than a fourfold increase in D54 values. Cells held for more than 72 h in these conditions, however, became as heat sensitive as nonhabituated populations. Habituation in the presence of sodium chloride or glycerol gave rise to less pronounced but still significant increases in heat tolerance at 54°C, and a shorter incubation time was required to maximize tolerance. The increase in heat tolerance following habituation in broths containing glucose-fructose (aw 0.95) was RpoS independent. The presence of chloramphenicol or rifampin during habituation and inactivation did not affect the extent of heat tolerance achieved, suggesting that de novo protein synthesis was probably not necessary. These data highlight the importance of cell prehistory prior to heat inactivation and may have implications for food manufacturers using low-aw ingredients. PMID:11055944

Global analysis of glycoproteins identifies markers of endotoxin tolerant monocytes and GPR84 as a modulator of TNFα expression.

PubMed

Müller, Mario M; Lehmann, Roland; Klassert, Tilman E; Reifenstein, Stella; Conrad, Theresia; Moore, Christoph; Kuhn, Anna; Behnert, Andrea; Guthke, Reinhard; Driesch, Dominik; Slevogt, Hortense

2017-04-12

Exposure of human monocytes to lipopolysaccharide (LPS) induces a temporary insensitivity to subsequent LPS challenges, a cellular state called endotoxin tolerance. In this study, we investigated the LPS-induced global glycoprotein expression changes of tolerant human monocytes and THP-1 cells to identify markers and glycoprotein targets capable to modulate the immunosuppressive state. Using hydrazide chemistry and LC-MS/MS analysis, we analyzed glycoprotein expression changes during a 48 h LPS time course. The cellular snapshots at different time points identified 1491 glycoproteins expressed by monocytes and THP-1 cells. Label-free quantitative analysis revealed transient or long-lasting LPS-induced expression changes of secreted or membrane-anchored glycoproteins derived from intracellular membrane coated organelles or from the plasma membrane. Monocytes and THP-1 cells demonstrated marked differences in glycoproteins differentially expressed in the tolerant state. Among the shared differentially expressed glycoproteins G protein-coupled receptor 84 (GPR84) was identified as being capable of modulating pro-inflammatory TNFα mRNA expression in the tolerant cell state when activated with its ligand Decanoic acid.

A highly reliable, high performance open avionics architecture for real time Nap-of-the-Earth operations

NASA Technical Reports Server (NTRS)

Harper, Richard E.; Elks, Carl

1995-01-01

An Army Fault Tolerant Architecture (AFTA) has been developed to meet real-time fault tolerant processing requirements of future Army applications. AFTA is the enabling technology that will allow the Army to configure existing processors and other hardware to provide high throughput and ultrahigh reliability necessary for TF/TA/NOE flight control and other advanced Army applications. A comprehensive conceptual study of AFTA has been completed that addresses a wide range of issues including requirements, architecture, hardware, software, testability, producibility, analytical models, validation and verification, common mode faults, VHDL, and a fault tolerant data bus. A Brassboard AFTA for demonstration and validation has been fabricated, and two operating systems and a flight-critical Army application have been ported to it. Detailed performance measurements have been made of fault tolerance and operating system overheads while AFTA was executing the flight application in the presence of faults.

Fault tolerance of artificial neural networks with applications in critical systems

NASA Technical Reports Server (NTRS)

Protzel, Peter W.; Palumbo, Daniel L.; Arras, Michael K.

1992-01-01

This paper investigates the fault tolerance characteristics of time continuous recurrent artificial neural networks (ANN) that can be used to solve optimization problems. The principle of operations and performance of these networks are first illustrated by using well-known model problems like the traveling salesman problem and the assignment problem. The ANNs are then subjected to 13 simultaneous 'stuck at 1' or 'stuck at 0' faults for network sizes of up to 900 'neurons'. The effects of these faults is demonstrated and the cause for the observed fault tolerance is discussed. An application is presented in which a network performs a critical task for a real-time distributed processing system by generating new task allocations during the reconfiguration of the system. The performance degradation of the ANN under the presence of faults is investigated by large-scale simulations, and the potential benefits of delegating a critical task to a fault tolerant network are discussed.

Glucose, insulin and C-peptide secretion in obese and non obese women with polycystic ovarian disease.

PubMed

Mahabeer, S; Naidoo, C; Joubert, S M

1990-06-01

Plasma glucose, immunoreactive insulin (IRI) and C-peptide responses during oral glucose tolerance testing (OGTT) were evaluated in 10 non obese women with polycystic ovarian disease (NOB-PCOD) and 10 obese women with polycystic ovarian disease (OB-PCOD). Mean plasma glucose response at 120 minutes in OB-PCOD showed impaired glucose tolerance. Also in this group, 1 patient had frank diabetes mellitus, whilst 3 other patients had impaired glucose tolerance 1 NOB-PCOD patient had impaired glucose tolerance. Mean plasma glucose levels and mean incremental glucose areas were higher in the OB-PCOD at all time intervals and reached statistical significance at 60 and 90 minutes. Mean plasma IRI levels were also higher in OB-PCOD at all time intervals, and reached statistically significant higher levels at 0, 60 and 90 minutes. Mean serum C-peptide valves were also higher at all time intervals in OB-PCOD. The relationship between acanthosis nigricans, obesity and PCOD was also analysed. It is evident from this study that obesity has a significant negative impact on the overall carbohydrate status in women with PCOD.

Evaluation of a Reverse Gradient Garment for prevention of bed-rest deconditioning

NASA Technical Reports Server (NTRS)

Sandler, H.; Dolkas, D.; Newsom, B.; Webb, P.; Annis, J.; Pace, N.; Grunbaum, B. W.

1983-01-01

A Reverse Gradient Garment (RGG) was used to intermittently induce venous pooling in the extremities of a magnitude similar to that seen in going from a lying to standing position during the course of a 15-d period of horizontal bed rest. Venous pooling failed to improve bed-rest-induced losses in +2.5 Gz and +3.0 Gz centrifugation tolerance or to prevent increased heart-rate responses to lower-body negative pressure (LBNP). Four subjects served as controls, four were treated. Tests during the 7-d recovery period showed fluid/electrolyte and body composition values to have returned to pre-bed-rest levels with continued depression of acceleration tolerance times (56% decreased at +2.5 Gz and 74% decreased at +3.0 Gz compared to pre-bed-rest levels) and exaggerated blood insulin response on glucose tolerance testing (blood insulin for treated group increased 95% at 1 h before bed rest and 465% during recovery). This study demonstrates that the physiologic changes after bed rest persist for significant periods of time. Acceleration tolerance time proved to be a sensitive test for the deconditioning process.

Nurses aged over 50 years and their experiences of shift work.

PubMed

Clendon, Jill; Walker, Leonie

2013-10-01

The Late Career Nurse project examined views and characteristics of nurses working in New Zealand who were born before 1960. This paper focuses on the experiences of such nurses who undertake shift work. The mean age of registered nurses in New Zealand has been rising steadily, and 40% are now aged 50 years or over. While there is substantial literature on the phenomenon and consequences of the ageing nursing workforce, little is known of the particular experiences of nurses aged over 50 years who work shifts. An anonymous online survey was emailed to eligible nurse New Zealand Nurses Organisation members aged over 50 years in February 2012. Quantitative and qualitative analyses of the 3273 responses received were undertaken. Over 45% of respondents worked shifts or flexible hours. While shift work suited many, others noted deleterious effects on family and social relationships, physical and mental health (notably sleep patterns and fatigue), and decreasing tolerance for shift work as they age. Poor scheduling practices were particularly detrimental. Worldwide, workforce ageing means strategies are required to retain older nurses in the workforce. Improved scheduling practices including increasing access to flexible and part time work hours, and development of resources on coping with shift work are recommended. © 2013 John Wiley & Sons Ltd.

Discretized Streams: A Fault-Tolerant Model for Scalable Stream Processing

DTIC Science & Technology

2012-12-14

Discretized Streams: A Fault-Tolerant Model for Scalable Stream Processing Matei Zaharia Tathagata Das Haoyuan Li Timothy Hunter Scott Shenker Ion...SUBTITLE Discretized Streams: A Fault-Tolerant Model for Scalable Stream Processing 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER...time. However, current programming models for distributed stream processing are relatively low-level often leaving the user to worry about consistency of

Exercise Versus +Gz Acceleration Training

NASA Technical Reports Server (NTRS)

Greenleaf, John E.; Simonson, S. R.; Stocks, J. M.; Evans, J. M.; Knapp, C. F.; Dalton, Bonnie P. (Technical Monitor)

2002-01-01

Decreased working capacity and "orthostatic" intolerance are two major problems for astronauts during and after landing from spaceflight in a return vehicle. The purpose was to test the hypotheses that (1) supine-passive-acceleration training, supine-interval-exercise plus acceleration training, and supine exercise plus acceleration training will improve orthostatic tolerance (OT) in ambulatory men; and that (2) addition of aerobic exercise conditioning will not influence this enhanced OT from that of passive-acceleration training. Seven untrained men (24-38 yr) underwent 3 training regimens (30 min/d x 5d/wk x 3wk on the human-powered centrifuge - HPC): (a) Passive acceleration (alternating +1.0 Gz to 50% Gzmax); (b) Exercise acceleration (alternating 40% - 90% V02max leg cycle exercise plus 50% of HPCmax acceleration); and (c) Combined intermittent exercise-acceleration at 40% to 90% HPCmax. Maximal supine exercise workloads increased (P < 0.05) by 8.3% with Passive, by 12.6% with Exercise, and by 15.4% with Combined; but maximal V02 and HR were unchanged in all groups. Maximal endurance (time to cessation) was unchanged with Passive, but increased (P < 0.05) with Exercise and Combined. Resting pre-tilt HR was elevated by 12.9% (P < 0.05) only after Passive training, suggesting that exercise training attenuated this HR response. All resting pre-tilt blood pressures (SBP, DBP, MAP) were not different pre- vs. post-training. Post-training tilt-tolerance time and HR were increased (P < 0.05) only with Passive training by 37.8% and by 29.1%, respectively. Thus, addition of exercise training attenuated the increased Passive tilt tolerance. Resting (pre-tilt) and post-tilt cardiac R-R interval, stroke volume, end-diastolic volume, and cardiac output were all uniformly reduced (P < 0.05) while peripheral resistance was uniformly increased (P < 0.05) pre-and post-training for the three regimens indicating no effect of any training regimen on those cardiovascular variables. Plasma volume (% delta) was uniformly decreased by 8% to 14% (P < 0.05) at tilt-tolerance pre- vs. post-training for all regimens indicating no effect of these training regimens on the level of vascular fluid shifts.

Experimental evaluation of certification trails using abstract data type validation

NASA Technical Reports Server (NTRS)

Wilson, Dwight S.; Sullivan, Gregory F.; Masson, Gerald M.

1993-01-01

Certification trails are a recently introduced and promising approach to fault-detection and fault-tolerance. Recent experimental work reveals many cases in which a certification-trail approach allows for significantly faster program execution time than a basic time-redundancy approach. Algorithms for answer-validation of abstract data types allow a certification trail approach to be used for a wide variety of problems. An attempt to assess the performance of algorithms utilizing certification trails on abstract data types is reported. Specifically, this method was applied to the following problems: heapsort, Hullman tree, shortest path, and skyline. Previous results used certification trails specific to a particular problem and implementation. The approach allows certification trails to be localized to 'data structure modules,' making the use of this technique transparent to the user of such modules.

Controlling geometric phase optically in a single spin in diamond

NASA Astrophysics Data System (ADS)

Yale, Christopher G.

Geometric phase, or Berry phase, is an intriguing quantum mechanical phenomenon that arises from the cyclic evolution of a quantum state. Unlike dynamical phases, which rely on the time and energetics of the interaction, the geometric phase is determined solely by the geometry of the path travelled in parameter space. As such, it is robust to certain types of noise that preserve the area enclosed by the path, and shows promise for the development of fault-tolerant logic gates. Here, we demonstrate the optical control of geometric phase within a solid-state spin qubit, the nitrogen-vacancy center in diamond. Using stimulated Raman adiabatic passage (STIRAP), we evolve a coherent dark state along `tangerine slice' trajectories on the Bloch sphere and probe these paths through time-resolved state tomography. We then measure the accumulated geometric phase through phase reference to a third ground spin state. In addition, we examine the limits of this control due to adiabatic breakdown as well as the longer timescale effect of far-detuned optical fields. Finally, we intentionally introduce noise into the experimental control parameters, and measure the distributions of the resulting phases to probe the resilience of the phase to differing types of noise. We also examine this robustness as a function of traversal time as well as the noise amplitude. Through these studies, we demonstrate that geometric phase is a promising route toward fault-tolerant quantum information processing. This work is supported by the AFOSR, the NSF, and the German Research Foundation.

Development of Electrical Capacitance Sensors for Accident Tolerant Fuel (ATF) Testing at the Transient Reactor Test (TREAT) Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Maolong; Ryals, Matthew; Ali, Amir

2016-08-01

A variety of instruments are being developed and qualified to support the Accident Tolerant Fuels (ATF) program and future transient irradiations at the Transient Reactor Test (TREAT) facility at Idaho National Laboratory (INL). The University of New Mexico (UNM) is working with INL to develop capacitance-based void sensors for determining the timing of critical boiling phenomena in static capsule fuel testing and the volume-averaged void fraction in flow-boiling in-pile water loop fuel testing. The static capsule sensor developed at INL is a plate-type configuration, while UNM is utilizing a ring-type capacitance sensor. Each sensor design has been theoretically and experimentallymore » investigated at INL and UNM. Experiments are being performed at INL in an autoclave to investigate the performance of these sensors under representative Pressurized Water Reactor (PWR) conditions in a static capsule. Experiments have been performed at UNM using air-water two-phase flow to determine the sensitivity and time response of the capacitance sensor under a flow boiling configuration. Initial measurements from the capacitance sensor have demonstrated the validity of the concept to enable real-time measurement of void fraction. The next steps include designing the cabling interface with the flow loop at UNM for Reactivity Initiated Accident (RIA) ATF testing at TREAT and further characterization of the measurement response for each sensor under varying conditions by experiments and modeling.« less

Toward Human-Carnivore Coexistence: Understanding Tolerance for Tigers in Bangladesh

PubMed Central

Inskip, Chloe; Roberts, Thomas; MacMillan, Douglas

2016-01-01

Fostering local community tolerance for endangered carnivores, such as tigers (Panthera tigris), is a core component of many conservation strategies. Identification of antecedents of tolerance will facilitate the development of effective tolerance-building conservation action and secure local community support for, and involvement in, conservation initiatives. We use a stated preference approach for measuring tolerance, based on the ‘Wildlife Stakeholder Acceptance Capacity’ concept, to explore villagers’ tolerance levels for tigers in the Bangladesh Sundarbans, an area where, at the time of the research, human-tiger conflict was severe. We apply structural equation modeling to test an a priori defined theoretical model of tolerance and identify the experiential and psychological basis of tolerance in this community. Our results indicate that beliefs about tigers and about the perceived current tiger population trend are predictors of tolerance for tigers. Positive beliefs about tigers and a belief that the tiger population is not currently increasing are both associated with greater stated tolerance for the species. Contrary to commonly-held notions, negative experiences with tigers do not directly affect tolerance levels; instead, their effect is mediated by villagers’ beliefs about tigers and risk perceptions concerning human-tiger conflict incidents. These findings highlight a need to explore and understand the socio-psychological factors that encourage tolerance towards endangered species. Our research also demonstrates the applicability of this approach to tolerance research to a wide range of socio-economic and cultural contexts and reveals its capacity to enhance carnivore conservation efforts worldwide. PMID:26760035

Toward Human-Carnivore Coexistence: Understanding Tolerance for Tigers in Bangladesh.

PubMed

Inskip, Chloe; Carter, Neil; Riley, Shawn; Roberts, Thomas; MacMillan, Douglas

2016-01-01

Fostering local community tolerance for endangered carnivores, such as tigers (Panthera tigris), is a core component of many conservation strategies. Identification of antecedents of tolerance will facilitate the development of effective tolerance-building conservation action and secure local community support for, and involvement in, conservation initiatives. We use a stated preference approach for measuring tolerance, based on the 'Wildlife Stakeholder Acceptance Capacity' concept, to explore villagers' tolerance levels for tigers in the Bangladesh Sundarbans, an area where, at the time of the research, human-tiger conflict was severe. We apply structural equation modeling to test an a priori defined theoretical model of tolerance and identify the experiential and psychological basis of tolerance in this community. Our results indicate that beliefs about tigers and about the perceived current tiger population trend are predictors of tolerance for tigers. Positive beliefs about tigers and a belief that the tiger population is not currently increasing are both associated with greater stated tolerance for the species. Contrary to commonly-held notions, negative experiences with tigers do not directly affect tolerance levels; instead, their effect is mediated by villagers' beliefs about tigers and risk perceptions concerning human-tiger conflict incidents. These findings highlight a need to explore and understand the socio-psychological factors that encourage tolerance towards endangered species. Our research also demonstrates the applicability of this approach to tolerance research to a wide range of socio-economic and cultural contexts and reveals its capacity to enhance carnivore conservation efforts worldwide.

Psychological aspects of political tolerance among adolescents.

PubMed

Sotelo, M J; Sangrador, J L

1997-12-01

This study concerns 273 Spanish adolescents, aged between 14 and 17, 125 boys and 148 girls. The measured variables were political tolerance, liking for several groups, political experience, cognitive moral reasoning, support for democratic norms, support for violent groups, identification with a group of friends, identification with a religious group, and identification with a soccer team. The objectives of this work were (a) to establish groups of adolescents based on the relationship between their willingness to extend rights to several groups and their liking of these groups, (b) to know the personality characteristics of tolerant and intolerant adolescents, and (c) to set up correlations between age and total tolerance, total liking, and the variables correlated with tolerance. The main findings are that older and younger adolescents belong to different groups, with respect to tolerance, and something similar can be said about boys and girls. Intolerant adolescents perceive themselves as anxious, insecure, solitary, and obstinate. Significant positive correlations between age and political experience, rated support for democratic norms and ratings for identification with a group of friends were found. On the contrary, there were significant negative correlations between age and rated support for violent groups, identification with a religious group, and identification with a soccer team.

Evaluation of zinc accumulation, allocation, and tolerance in Zea mays L. seedlings: implication for zinc phytoextraction.

PubMed

Bashmakov, Dmitry I; Lukatkin, Alexander S; Anjum, Naser A; Ahmad, Iqbal; Pereira, Eduarda

2015-10-01

This work investigated the accumulation, allocation, and impact of zinc (Zn; 1.0 μM-10 mM) in maize (Zea mays L.) seedlings under simulated laboratory conditions. Z. mays exhibited no significant change in its habitus (the physical characteristics of plants) up to 10-1000 μM of Zn (vs 5-10 mM Zn). Zn tolerance evaluation, based on the root test, indicated a high tolerance of Z. mays to both low and intermediate (or relatively high) concentrations of Zn, whereas this plant failed to tolerate 10 mM Zn and exhibited a 5-fold decrease in its Zn tolerance. Contingent to Zn treatment levels, Zn hampered the growth of axial organs and brought decreases in the leaf area, water regime, and biomass accumulation. Nevertheless, at elevated levels of Zn (10 mM), Zn(2+) was stored in the root cytoplasm and inhibited both axial organ growth and water regime. However, accumulation and allocation of Zn in Z. mays roots, studied herein employing X-ray fluorimeter and histochemical methods, were close to Zn accumulator plants. Overall, the study outcomes revealed Zn tolerance of Z. mays, and also implicate its potential role in Zn phytoextraction.

Post-translocational adaptation drives evolution through genetic selection and transcriptional shift in Saccharomyces cerevisiae.

PubMed

Tosato, Valentina; Sims, Jason; West, Nicole; Colombin, Martina; Bruschi, Carlo V

2017-05-01

Adaptation by natural selection might improve the fitness of an organism and its probability to survive in unfavorable environmental conditions. Decoding the genetic basis of adaptive evolution is one of the great challenges to deal with. To this purpose, Saccharomyces cerevisiae has been largely investigated because of its short division time, excellent aneuploidy tolerance and the availability of the complete sequence of its genome with a thorough genome database. In the past, we developed a system, named bridge-induced translocation, to trigger specific, non-reciprocal translocations, exploiting the endogenous recombination system of budding yeast. This technique allows users to generate a heterogeneous population of cells with different aneuploidies and increased phenotypic variation. In this work, we demonstrate that ad hoc chromosomal translocations might induce adaptation, fostering selection of thermo-tolerant yeast strains with improved phenotypic fitness. This "yeast eugenomics" correlates with a shift to enhanced expression of genes involved in stress response, heat shock as well as carbohydrate metabolism. We propose that the bridge-induced translocation is a suitable approach to generate adapted, physiologically boosted strains for biotechnological applications.

Navigation Ground Data System Engineering for the Cassini/Huygens Mission

NASA Technical Reports Server (NTRS)

Beswick, R. M.; Antreasian, P. G.; Gillam, S. D.; Hahn, Y.; Roth, D. C.; Jones, J. B.

2008-01-01

The launch of the Cassini/Huygens mission on October 15, 1997, began a seven year journey across the solar system that culminated in the entry of the spacecraft into Saturnian orbit on June 30, 2004. Cassini/Huygens Spacecraft Navigation is the result of a complex interplay between several teams within the Cassini Project, performed on the Ground Data System. The work of Spacecraft Navigation involves rigorous requirements for accuracy and completeness carried out often under uncompromising critical time pressures. To support the Navigation function, a fault-tolerant, high-reliability/high-availability computational environment was necessary to support data processing. Configuration Management (CM) was integrated with fault tolerant design and security engineering, according to the cornerstone principles of Confidentiality, Integrity, and Availability. Integrated with this approach are security benchmarks and validation to meet strict confidence levels. In addition, similar approaches to CM were applied in consideration of the staffing and training of the system administration team supporting this effort. As a result, the current configuration of this computational environment incorporates a secure, modular system, that provides for almost no downtime during tour operations.

Quantitative risk assessment integrated with process simulator for a new technology of methanol production plant using recycled CO₂.

PubMed

Di Domenico, Julia; Vaz, Carlos André; de Souza, Maurício Bezerra

2014-06-15

The use of process simulators can contribute with quantitative risk assessment (QRA) by minimizing expert time and large volume of data, being mandatory in the case of a future plant. This work illustrates the advantages of this association by integrating UNISIM DESIGN simulation and QRA to investigate the acceptability of a new technology of a Methanol Production Plant in a region. The simulated process was based on the hydrogenation of chemically sequestered carbon dioxide, demanding stringent operational conditions (high pressures and temperatures) and involving the production of hazardous materials. The estimation of the consequences was performed using the PHAST software, version 6.51. QRA results were expressed in terms of individual and social risks. Compared to existing tolerance levels, the risks were considered tolerable in nominal conditions of operation of the plant. The use of the simulator in association with the QRA also allowed testing the risk in new operating conditions in order to delimit safe regions for the plant. Copyright © 2014 Elsevier B.V. All rights reserved.

Enhancement in ionic liquid tolerance of cellulase immobilized on PEGylated graphene oxide nanosheets: Application in saccharification of lignocellulose.

PubMed

Xu, Jiaxing; Sheng, Zhenhuan; Wang, Xinfeng; Liu, Xiaoyan; Xia, Jun; Xiong, Peng; He, Bingfang

2016-01-01

The objective of the present work was to improve ionic liquid (IL) tolerance of cellulase based on the exploration of functional nanoscale carriers for potential application in lignocellulosic biorefinery. PEGylated graphene oxide (GO) composite was successfully fabricated by chemical binding of 4-arm-PEG-NH2 and GO and applied to the immobilization of cellulase. The PEGylated GO-Cellulase retained 61% of the initial activity in 25% (w/v) 1-butyl-3-methylimidazolium chloride ([Bmim][Cl]) while free cellulase only retained 2%. The IL stability was enhanced more than 30 times. The relatively minor change in Km value (from 2.7 to 3.2mgmL(-1)) after the immobilization suggested that PEGylated GO-Cellulase was capable of closely mimicking the performance of free enzyme. After treating rice straw with [Bmim][Cl] and dilution to a final IL concentration of 15% (w/v), the slurry was directly hydrolyzed using PEGylated GO-Cellulase without IL removing and a high hydrolysis rate of 87% was achieved. Copyright © 2015 Elsevier Ltd. All rights reserved.

Modeling and measurement of fault-tolerant multiprocessors

NASA Technical Reports Server (NTRS)

Shin, K. G.; Woodbury, M. H.; Lee, Y. H.

1985-01-01

The workload effects on computer performance are addressed first for a highly reliable unibus multiprocessor used in real-time control. As an approach to studing these effects, a modified Stochastic Petri Net (SPN) is used to describe the synchronous operation of the multiprocessor system. From this model the vital components affecting performance can be determined. However, because of the complexity in solving the modified SPN, a simpler model, i.e., a closed priority queuing network, is constructed that represents the same critical aspects. The use of this model for a specific application requires the partitioning of the workload into job classes. It is shown that the steady state solution of the queuing model directly produces useful results. The use of this model in evaluating an existing system, the Fault Tolerant Multiprocessor (FTMP) at the NASA AIRLAB, is outlined with some experimental results. Also addressed is the technique of measuring fault latency, an important microscopic system parameter. Most related works have assumed no or a negligible fault latency and then performed approximate analyses. To eliminate this deficiency, a new methodology for indirectly measuring fault latency is presented.

The GBT-SCA, a radiation tolerant ASIC for detector control and monitoring applications in HEP experiments

NASA Astrophysics Data System (ADS)

Caratelli, A.; Bonacini, S.; Kloukinas, K.; Marchioro, A.; Moreira, P.; De Oliveira, R.; Paillard, C.

2015-03-01

The future upgrades of the LHC experiments will increase the beam luminosity leading to a corresponding growth of the amounts of data to be treated by the data acquisition systems. To address these needs, the GBT (Giga-Bit Transceiver optical link [1,2]) architecture was developed to provide the simultaneous transfer of readout data, timing and trigger signals as well as slow control and monitoring data. The GBT-SCA ASIC, part of the GBT chip-set, has the purpose to distribute control and monitoring signals to the on-detector front-end electronics and perform monitoring operations of detector environmental parameters. In order to meet the requirements of different front-end ASICs used in the experiments, it provides various user-configurable interfaces capable to perform simultaneous operations. It is designed employing radiation tolerant design techniques to ensure robustness against SEUs and TID radiation effects and is implemented in a commercial 130 nm CMOS technology. This work presents the GBT-SCA architecture, the ASIC interfaces, the data transfer protocol, and its integration with the GBT optical link.

A novel cellulase free alkaliphilic xylanase from alkali tolerant Penicillium citrinum: production, purification and characterization.

PubMed

Dutta, T; Sengupta, R; Sahoo, R; Sinha Ray, S; Bhattacharjee, A; Ghosh, S

2007-02-01

The enzymatic hydrolysis of xylan has potential economic and environment-friendly applications. Therefore, attention is focused here on the discovery of new extremophilic xylanase in order to meet the requirements of industry. An extracellular xylanase was purified from the culture filtrate of P. citrinum grown on wheat bran bed in solid substrate fermentation. Single step purification was achieved using hydrophobic interaction chromatography. The purified enzyme showed a single band on SDS-PAGE with an apparent molecular weight of c. 25 kDa and pI of 3.6. Stimulation of the activity by beta mercaptoethanol, dithiotheritol (DTT) and cysteine was observed. Moderately thermostable xylanase showed optimum activity at 50 degrees C at pH 8.5. Xylanase purified from P. citrinum was alkaliphilic and moderately thermostable in nature. The present work reports for the first time the purification and characterization of a novel endoglucanase free alkaliphilic xylanase from the alkali tolerant fungus Penicillium citrinum. The alkaliphilicity and moderate thermostability of this xylanase may have potential implications in paper and pulp industries.

40 CFR 176.5 - Establishment of a time-limited tolerance or exemption.

Code of Federal Regulations, 2010 CFR

2010-07-01

... authorizes an emergency exemption or a crisis exemption. EPA will consider establishing such a tolerance only... exemption, has stated its intention to issue a crisis exemption, or has issued a crisis exemption for a use...

78 FR 79579 - Energy Conservation Program: Alternative Efficiency Determination Methods, Basic Model Definition...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-31

... Working Group agreed on a one- sided 5 percent tolerance when comparing the validation test results to the... one DOE representative. 78 FR 22431. The members of the Working Group were selected to ensure a broad... Issues 1. Pre-Approval The Working Group unanimously recommended that DOE not require pre- approval for...

Analyzing the revolution of anaerobic ammonium oxidation (anammox) performance and sludge characteristics under zinc inhibition.

PubMed

Zhang, Qian-Qian; Zhang, Zheng-Zhe; Guo, Qiong; Wang, Jiao-Jiao; Wang, Hui-Zhong; Jin, Ren-Cun

2015-04-01

In the present study, the short- and long-term effects of Zn(II) on the anaerobic ammonium oxidation (anammox) performance and sludge characteristics were evaluated. The anammox activity decreased with increasing Zn(II) concentration and pre-exposure time in short-term tests. The half maximal inhibitory concentration (IC50) of Zn(II) was found to be 25.0 mg L(-1). The 24 and 48-h pre-exposure time was a restricted factor impacting the anammox activity, and washing the inhibited sludge with buffer solution only worked under 0 and 24-h pre-exposure time. The anammox sludge could tolerate 5 mg L(-1) Zn(II) but was suppressed at 8 mg L(-1). The inhibited performance could be remitted, as the combination strategies were applied, and after the short term of recovery period, the inhibited sludge characteristics were remitted to the normal.

The linear sizes tolerances and fits system modernization

NASA Astrophysics Data System (ADS)

Glukhov, V. I.; Grinevich, V. A.; Shalay, V. V.

2018-04-01

The study is carried out on the urgent topic for technical products quality providing in the tolerancing process of the component parts. The aim of the paper is to develop alternatives for improving the system linear sizes tolerances and dimensional fits in the international standard ISO 286-1. The tasks of the work are, firstly, to classify as linear sizes the elements additionally linear coordinating sizes that determine the detail elements location and, secondly, to justify the basic deviation of the tolerance interval for the element's linear size. The geometrical modeling method of real details elements, the analytical and experimental methods are used in the research. It is shown that the linear coordinates are the dimensional basis of the elements linear sizes. To standardize the accuracy of linear coordinating sizes in all accuracy classes, it is sufficient to select in the standardized tolerance system only one tolerance interval with symmetrical deviations: Js for internal dimensional elements (holes) and js for external elements (shafts). The main deviation of this coordinating tolerance is the average zero deviation, which coincides with the nominal value of the coordinating size. Other intervals of the tolerance system are remained for normalizing the accuracy of the elements linear sizes with a fundamental change in the basic deviation of all tolerance intervals is the maximum deviation corresponding to the limit of the element material: EI is the lower tolerance for the of the internal elements (holes) sizes and es is the upper tolerance deviation for the outer elements (shafts) sizes. It is the sizes of the material maximum that are involved in the of the dimensional elements mating of the shafts and holes and determine the fits type.

Change in blood coagulation indices as a function of the incubation period of plasma in a constant magnetic field. [considering heparin tolerance and recalcification

NASA Technical Reports Server (NTRS)

Yepishina, S. G.

1974-01-01

The influence of a constant magnetic field (CMF) with a strength of 250 and 2500 oersteds on the recalcification reaction and the tolerance of plasma to heparin was studied as a function of the exposure time of the plasma to the CMF. The maximum and reliable change in the activation of the coagulatory system of the blood was observed after a 20-hour incubation of the plasma in a CMF. As the exposure time increased, the recalcification reaction changed insigificantly; the difference between the mean arithmetic of the experiment and control values was not statistically reliable. The tolerance of the plasma to heparin as a function of the exposure time to the CMF of the plasma was considerably modified, an was statistically reliable.

Synthesis of feedback systems with large plant ignorance for prescribed time domain tolerances

NASA Technical Reports Server (NTRS)

Horowitz, I. M.; Sidi, M.

1971-01-01

There is given a minimum-phase plant transfer function, with prescribed bounds on its parameter values. The plant is imbedded in a two-degree-of freedom feedback system, which is to be designed such that the system time response to a deterministic input lies within specified boundaries. Subject to the above, the design should be such as to minimize the effect of sensor noise at the input to the plant. This report presents a design procedure for this purpose, based on frequency response concepts. The time-domain tolerances are translated into equivalent frequency response tolerances. The latter lead to bounds on the loop transmission function in the form of continuous curves on the Nichols chart. The properties of the loop transmission function which satisfy these bounds with minimum effect of sensor noise, are derived.

Mitochondrial DNA Sequence and Lack of Response to Anoxia in the Annual Killifish Austrofundulus limnaeus.

PubMed

Wagner, Josiah T; Herrejon Chavez, Florisela; Podrabsky, Jason E

2016-01-01

The annual killifish Austrofundulus limnaeus inhabits ephemeral ponds in regions of Venezuela, South America. Permanent populations of A. limnaeus are maintained by production of stress-tolerant embryos that are able to persist in the desiccated sediment. Previous work has demonstrated that A. limnaeus have a remarkable ability to tolerate extended periods of anoxia and desiccating conditions. After considering temperature, A. limnaeus embryos have the highest known tolerance to anoxia when compared to any other vertebrate yet studied. Oxygen is completely essential for the process of oxidative phosphorylation by mitochondria, the intracellular organelle responsible for the majority of adenosine triphosphate production. Thus, understanding the unique properties of A. limnaeus mitochondria is of great interest. In this work, we describe the first complete mitochondrial genome (mtgenome) sequence of a single adult A. limnaeus individual and compare both coding and non-coding regions to several other closely related fish mtgenomes. Mitochondrial features were predicted using MitoAnnotator and polyadenylation sites were predicted using RNAseq mapping. To estimate the responsiveness of A. limnaeus mitochondria to anoxia treatment, we measure relative mitochondrial DNA copy number and total citrate synthase activity in both relatively anoxia-tolerant and anoxia-sensitive embryonic stages. Our cross-species comparative approach identifies unique features of ND1, ND5, ND6, and ATPase-6 that may facilitate the unique phenotype of A. limnaeus embryos. Additionally, we do not find evidence for mitochondrial degradation or biogenesis during anoxia/reoxygenation treatment in A. limnaeus embryos, suggesting that anoxia-tolerant mitochondria do not respond to anoxia in a manner similar to anoxia-sensitive mitochondria.

Design Manual for Impact Damage Tolerant Aircraft Structure

DTIC Science & Technology

1981-10-01

controlled AAA guns having a very high rate of fire, is a significant threat. The final type of non -exploding military projectile-missile warhead fragments...8217~ AGARD-AG-238 NORTH 4TLANTIC TR!EATY ORGANIZATION ADVISORY GROUP FOR AERGSPACE RESEARCH AND DEVELOPMENT (ORGANISATION DU TRAITE DE L’ATLANTIQUE NORD...within the Working Group on Impact Damage Tolerance of Structures and also at the Specialists’ Meeting held in Ankara in September 1975 (see AGARD

A Realistic Framework for Delay-Tolerant Network Routing in Open Terrains with Continuous Churn

NASA Astrophysics Data System (ADS)

Mahendran, Veeramani; Anirudh, Sivaraman K.; Murthy, C. Siva Ram

The conventional analysis of Delay-Tolerant Network (DTN) routing assumes that the terrain over which nodes move is closed implying that when the nodes hit a boundary, they either wrap around or get reflected. In this work, we study the effect of relaxing this closed terrain assumption on the routing performance, where a continuous stream of nodes enter the terrain and get absorbed upon hitting the boundary.

34 CFR 385.4 - What definitions apply to these programs?

Code of Federal Regulations, 2010 CFR

2010-07-01

... with disabilities to promote self-awareness and esteem, develop advocacy and self-empowerment skills... impairment that seriously limits one or more functional capacities (such as mobility, communication, self-care, self-direction, interpersonal skills, work tolerance, or work skills) in terms of an employment...

Alcohol-induced physiological displacements and their effects on flight-related functions.

DOT National Transportation Integrated Search

1982-03-01

Tolerances of human subjects for orthostasis and physical work were determined at a simulated altitude of 3,048 m. Orthostasis was induced with a lower body negative pressure (LBNP) device and physical work was done on a pedal ergometer. Altitude was...

Relationship between cold pressor pain-sensitivity and sleep quality in opioid-dependent males on methadone treatment

PubMed Central

Lee, Chee Siong; Tan, Soo Choon; Mohamad, Nasir; Lee, Yeong Yeh; Ismail, Rusli

2015-01-01

Aim. Poor sleep quality due to pain has been reported among opioid-dependent male patients on methadone maintenance therapy (MMT) but objective pain data are lacking. This study aimed to investigate the rate of pain-sensitivity using cold pressor test (CPT) and the relationship between pain-sensitivity and sleep quality in this population. Methods. A total of 168 male participants were included into the study. Objective pain-tolerance was evaluated at 0 h and at 24 h after the first CPT. Malay version of the Pittsburgh Sleep Quality Index (PSQI) and the subjective opiate withdrawal scale (SOWS) questionnaires were administered to evaluate the quality of sleep and withdrawal symptoms, respectively. Results. The mean age of study participants was 37.22 (SD 6.20) years old. Mean daily methadone dose was 76.64 (SD 37.63) mg/day, mean global PSQI score was 5.47 (SD 2.74) and mean averaged SOWS score was 5.43 (SD 6.91). The averaged pain-tolerance time ranged from 7 to 300 s with a mean time of 32.16 (SE 2.72) s, slightly below the cut-off score of 37.53 s. More specifically, 78.6% (n = 132) of participants were identified as pain-sensitive (averaged pain-tolerance time ≤37.53 s), and 36 (21.4%) participants were pain-tolerant (averaged pain-tolerance time >37.53 s). The pain-sensitive group reported poorer sleep quality with mean (SD) PSQI of 5.78 (2.80) compared with the pain-tolerant group with mean (SD) PSQI of 4.31 (2.18) (p = 0.005). With analysis of covariance, pain-sensitive group was found to have higher global PSQI scores (adjusted mean 5.76, 95% CI 5.29; 6.22) than pain-tolerant participants (adjusted mean 4.42, 95% CI 3.52; 5.32) (p = 0.010). Conclusions. Majority of opioid-dependent male patients on methadone treatment are pain-sensitive with CPT. Poor sleep quality is associated with cold pressor pain-sensitivity. Pain and sleep complaints in this male population should not be overlooked. PMID:25870765

Dry heat tolerance of the dry colony in Nostoc sp. HK-01 for useful usage in space agriculture

NASA Astrophysics Data System (ADS)

Kimura, Shunta; Tomita-Yokotani, Kaori; Yamashita, Masamichi; Sato, Seigo; Katoh, Hiroshi

Space agriculture producing foods is important as one of approach for space habitation. Nostoc sp. HK-01 is one of terrestrial cyanobacterium having a high dry tolerance and it has several ability, photosynthesis, nitrogen fixation and usefulness as a food, it is thought that it can be used for space agriculture. Besides, a study on each tolerance predicted at the time of introduction to space agriculture is necessary. Therefore, as one of the tolerance that are intended to space environment, dry heat ( 100(°) C, 10 h ) tolerance of dry colony in Nostoc sp. HK-01 has been investigated, but the detail function of them has not yet been elucidated. We focused on the extracellular polysaccharides ( EPS ) having the various tolerance, desiccation, low temperature, NaCl, and heavy particle beam. We will consider the function and useful usage of this cyanobacterum in space agriculture after the consideration of the results of contribution of the possibility that EPS improves dry heat tolerance under a dry condition.

Tolerance to MHC class II disparate allografts through genetic modification of bone marrow

PubMed Central

Jindra, Peter T.; Tripathi, Sudipta; Tian, Chaorui; Iacomini, John; Bagley, Jessamyn

2012-01-01

Induction of molecular chimerism through genetic modification of bone marrow is a powerful tool for the induction of tolerance. Here we demonstrate for the first time that expression of an allogeneic MHC class II gene in autologous bone marrow cells, resulting in a state of molecular chimerism, induces tolerance to MHC class II mismatched skin grafts, a stringent test of transplant tolerance. Reconstitution of recipients with syngeneic bone marrow transduced with retrovirus encoding H-2I-Ab (I-Ab) resulted the long-term expression of the retroviral gene product on the surface of MHC class II-expressing bone marrow derived cell types. Mechanistically, tolerance was maintained by the presence of regulatory T cells, which prevented proliferation and cytokine production by alloreactive host T cells. Thus, the introduction of MHC class II genes into bone marrow derived cells through genetic engineering results in tolerance. These results have the potential to extend the clinical applicability of molecular chimerism for tolerance induction. PMID:22833118

Effect of nicotinic acid on the sleep time and tolerance induced by ethanol in the rat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basilio, C.; Toro, A.; Yojay, L.

The intraperitoneal (i.p.) administration (50 mg/kg) of nicotinic acid (NA), markedly decreased the sleep time of rats pretreated (10 min before), post-treated (10 min after) or simultaneously treated with ethanol (4 g/Kg i.p.). A similar effect was observed on the sleep time induced by pentobarbital (37 mg/Kg i.p.). Blood alcohol levels (BAL) were the same or slightly higher in the animals pretreated with NA than in the control animals pre-injected with saline. Nicotinamide and NAD had no effect. A total of three doses of ethanol, each one administered weekly or biweekly, induced tolerance, which persisted for approximately six weeks. Aftermore » this period, a hypersensitivity to ethanol appeared to develop. This phenomenon was not observed when NA was pre-injected 10 min before each dose of ethanol. The sleep time of the latter animals did not change neither during the treatment period nor after six weeks without any treatment. BAL were slightly higher in NA treated than in control animals. The authors concluded that the effect of NA on the sleep time and tolerance induced by ethanol is not due to an increased rate of its metabolism and/or elimination but to a long-lasting effect that decreases the sensitivity of the nervous cells to ethanol. The mechanisms involved in the shortening of the sleep time as well as those responsible for the loss of the capacity to develop tolerance are under current investigation.« less

Changes in the retreatment radiation tolerance of the spinal cord with time after the initial treatment.

PubMed

Woolley, Thomas E; Belmonte-Beitia, Juan; Calvo, Gabriel F; Hopewell, John W; Gaffney, Eamonn A; Jones, Bleddyn

2018-06-01

To estimate, from experimental data, the retreatment radiation 'tolerances' of the spinal cord at different times after initial treatment. A model was developed to show the relationship between the biological effective doses (BEDs) for two separate courses of treatment with the BED of each course being expressed as a percentage of the designated 'retreatment tolerance' BED value, denoted [Formula: see text] and [Formula: see text]. The primate data of Ang et al. ( 2001 ) were used to determine the fitted parameters. However, based on rodent data, recovery was assumed to commence 70 days after the first course was complete, and with a non-linear relationship to the magnitude of the initial BED (BED init ). The model, taking into account the above processes, provides estimates of the retreatment tolerance dose after different times. Extrapolations from the experimental data can provide conservative estimates for the clinic, with a lower acceptable myelopathy incidence. Care must be taken to convert the predicted [Formula: see text] value into a formal BED value and then a practical dose fractionation schedule. Used with caution, the proposed model allows estimations of retreatment doses with elapsed times ranging from 70 days up to three years after the initial course of treatment.

Scalable Energy Efficiency with Resilience for High Performance Computing Systems: A Quantitative Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Li; Chen, Zizhong; Song, Shuaiwen

2016-01-18

Energy efficiency and resilience are two crucial challenges for HPC systems to reach exascale. While energy efficiency and resilience issues have been extensively studied individually, little has been done to understand the interplay between energy efficiency and resilience for HPC systems. Decreasing the supply voltage associated with a given operating frequency for processors and other CMOS-based components can significantly reduce power consumption. However, this often raises system failure rates and consequently increases application execution time. In this work, we present an energy saving undervolting approach that leverages the mainstream resilience techniques to tolerate the increased failures caused by undervolting.

SONGS IN THE COUNTERTRANSFERENCE OR "GILDING THE PHILOSOPHIC PILL".

PubMed

Peterson, Charles A

2017-06-01

Songs that interrupt the psychoanalytic psychotherapist's countertransference reverie are invariably relevant and potentially useful. Like any other countertransference "presence," songs accompanying the narrative may contribute to understanding both patient and analytic process. Taking their intrusive, fecund, pesky presence one step further, song lyrics may be used as metaphor-saturated interventions, helping reach the well-defended patient. Five brief vignettes illustrate the process. Because we must learn to tolerate ordinary unhappiness, Blues music, a carrier of preconscious mythic themes (love and work), may prove especially useful, helping the patient indirectly embrace everyday wisdom, endure hard times, universalize misery, and see ourselves in the roomy mirror of metaphor.

Investigating the Interplay between Energy Efficiency and Resilience in High Performance Computing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Li; Song, Shuaiwen; Wu, Panruo

2015-05-29

Energy efficiency and resilience are two crucial challenges for HPC systems to reach exascale. While energy efficiency and resilience issues have been extensively studied individually, little has been done to understand the interplay between energy efficiency and resilience for HPC systems. Decreasing the supply voltage associated with a given operating frequency for processors and other CMOS-based components can significantly reduce power consumption. However, this often raises system failure rates and consequently increases application execution time. In this work, we present an energy saving undervolting approach that leverages the mainstream resilience techniques to tolerate the increased failures caused by undervolting.

Scalable Energy Efficiency with Resilience for High Performance Computing Systems: A Quantitative Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Li; Chen, Zizhong; Song, Shuaiwen Leon

2015-11-16

Energy efficiency and resilience are two crucial challenges for HPC systems to reach exascale. While energy efficiency and resilience issues have been extensively studied individually, little has been done to understand the interplay between energy efficiency and resilience for HPC systems. Decreasing the supply voltage associated with a given operating frequency for processors and other CMOS-based components can significantly reduce power consumption. However, this often raises system failure rates and consequently increases application execution time. In this work, we present an energy saving undervolting approach that leverages the mainstream resilience techniques to tolerate the increased failures caused by undervolting.

Stretchable hydrogen sensors employing palladium nanosheets transferred onto an elastomeric substrate

NASA Astrophysics Data System (ADS)

Namgung, Gitae; Ta, Qui Thanh Hoai; Noh, Jin-Seo

2018-07-01

Stretchable hydrogen sensors were fabricated from Pd nanosheets that were transferred onto a PDMS substrate. To prepare the Pd nanosheets, a Pd thin film on PDMS was first biaxially stretched and then PDMS substrate was etched off. The size of Pd nanosheets decreased as the applied strain increased and the film thickness decreased. A transfer technique was utilized to implement the stretchable hydrogen sensors. The stretchable sensors exhibited negative response behaviors upon the exposure to hydrogen gas. Interestingly, the sensors worked even under large strains up to 30%, demonstrating a potential as a high-strain-tolerable hydrogen sensor for the first time.

Multiple Embedded Processors for Fault-Tolerant Computing

NASA Technical Reports Server (NTRS)

Bolotin, Gary; Watson, Robert; Katanyoutanant, Sunant; Burke, Gary; Wang, Mandy

2005-01-01

A fault-tolerant computer architecture has been conceived in an effort to reduce vulnerability to single-event upsets (spurious bit flips caused by impingement of energetic ionizing particles or photons). As in some prior fault-tolerant architectures, the redundancy needed for fault tolerance is obtained by use of multiple processors in one computer. Unlike prior architectures, the multiple processors are embedded in a single field-programmable gate array (FPGA). What makes this new approach practical is the recent commercial availability of FPGAs that are capable of having multiple embedded processors. A working prototype (see figure) consists of two embedded IBM PowerPC 405 processor cores and a comparator built on a Xilinx Virtex-II Pro FPGA. This relatively simple instantiation of the architecture implements an error-detection scheme. A planned future version, incorporating four processors and two comparators, would correct some errors in addition to detecting them.

Engineering membrane and cell-wall programs for tolerance to toxic chemicals: Beyond solo genes.

PubMed

Sandoval, Nicholas R; Papoutsakis, Eleftherios T

2016-10-01

Metabolite toxicity in microbes, particularly at the membrane, remains a bottleneck in the production of fuels and chemicals. Under chemical stress, native adaptation mechanisms combat hyper-fluidization by modifying the phospholipids in the membrane. Recent work in fluxomics reveals the mechanism of how membrane damage negatively affects energy metabolism while lipidomic and transcriptomic analyses show that strains evolved to be tolerant maintain membrane fluidity under stress through a variety of mechanisms such as incorporation of cyclopropanated fatty acids, trans-unsaturated fatty acids, and upregulation of cell wall biosynthesis genes. Engineered strains with modifications made in the biosynthesis of fatty acids, peptidoglycan, and lipopolysaccharide have shown increased tolerance to exogenous stress as well as increased production of desired metabolites of industrial importance. We review recent advances in elucidation of mechanisms or toxicity and tolerance as well as efforts to engineer the bacterial membrane and cell wall. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluating and extending user-level fault tolerance in MPI applications

DOE PAGES

Laguna, Ignacio; Richards, David F.; Gamblin, Todd; ...

2016-01-11

The user-level failure mitigation (ULFM) interface has been proposed to provide fault-tolerant semantics in the Message Passing Interface (MPI). Previous work presented performance evaluations of ULFM; yet questions related to its programability and applicability, especially to non-trivial, bulk synchronous applications, remain unanswered. In this article, we present our experiences on using ULFM in a case study with a large, highly scalable, bulk synchronous molecular dynamics application to shed light on the advantages and difficulties of this interface to program fault-tolerant MPI applications. We found that, although ULFM is suitable for master–worker applications, it provides few benefits for more common bulkmore » synchronous MPI applications. Furthermore, to address these limitations, we introduce a new, simpler fault-tolerant interface for complex, bulk synchronous MPI programs with better applicability and support than ULFM for application-level recovery mechanisms, such as global rollback.« less

Genome-Wide Association Study Reveals a New QTL for Salinity Tolerance in Barley (Hordeum vulgare L.)

PubMed Central

Fan, Yun; Zhou, Gaofeng; Shabala, Sergey; Chen, Zhong-Hua; Cai, Shengguan; Li, Chengdao; Zhou, Meixue

2016-01-01

Salinity stress is one of the most severe abiotic stresses that affect agricultural production. Genome wide association study (GWAS) has been widely used to detect genetic variations in extensive natural accessions with more recombination and higher resolution. In this study, 206 barley accessions collected worldwide were genotyped with 408 Diversity Arrays Technology (DArT) markers and evaluated for salinity stress tolerance using salinity tolerance score – a reliable trait developed in our previous work. GWAS for salinity tolerance had been conducted through a general linkage model and a mixed linkage model based on population structure and kinship. A total of 24 significant marker-trait associations were identified. A QTL on 4H with the nearest marker of bPb-9668 was consistently detected in all different methods. This QTL has not been reported before and is worth to be further confirmed with bi-parental populations. PMID:27446173

Digital frequency-offset detector

NASA Technical Reports Server (NTRS)

Bogart, R. W.; Juengst, M. J.

1977-01-01

Simple, low-cost device with designer-selectable tolerances provides accurate frequency comparison with minimal circuitry and ease of adjustment. Warning alerts if frequencies being compared fall outside selected tolerance. Device can be applied to any electronic system where accurate timing or frequency control is important.

76 FR 7712 - Clothianidin; Time-Limited Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... registration of this seed treatment. Valent has requested an experimental use permit and this tolerance to... evidence of increased quantitative or qualitative susceptibility of rat or rabbit fetuses following in utero exposure to clothianidin in developmental studies; however, increased quantitative susceptibility...

Radiation-induced amorphization resistance and radiation tolerance in structurally related oxides.

PubMed

Sickafus, Kurt E; Grimes, Robin W; Valdez, James A; Cleave, Antony; Tang, Ming; Ishimaru, Manabu; Corish, Siobhan M; Stanek, Christopher R; Uberuaga, Blas P

2007-03-01

Ceramics destined for use in hostile environments such as nuclear reactors or waste immobilization must be highly durable and especially resistant to radiation damage effects. In particular, they must not be prone to amorphization or swelling. Few ceramics meet these criteria and much work has been devoted in recent years to identifying radiation-tolerant ceramics and the characteristics that promote radiation tolerance. Here, we examine trends in radiation damage behaviour for families of compounds related by crystal structure. Specifically, we consider oxides with structures related to the fluorite crystal structure. We demonstrate that improved amorphization resistance characteristics are to be found in compounds that have a natural tendency to accommodate lattice disorder.

Statistical computation of tolerance limits

NASA Technical Reports Server (NTRS)

Wheeler, J. T.

1993-01-01

Based on a new theory, two computer codes were developed specifically to calculate the exact statistical tolerance limits for normal distributions within unknown means and variances for the one-sided and two-sided cases for the tolerance factor, k. The quantity k is defined equivalently in terms of the noncentral t-distribution by the probability equation. Two of the four mathematical methods employ the theory developed for the numerical simulation. Several algorithms for numerically integrating and iteratively root-solving the working equations are written to augment the program simulation. The program codes generate some tables of k's associated with the varying values of the proportion and sample size for each given probability to show accuracy obtained for small sample sizes.

Effects of nutrient and water restriction on thermal tolerance: A test of mechanisms and hypotheses.

PubMed

Mitchell, Katherine A; Boardman, Leigh; Clusella-Trullas, Susana; Terblanche, John S

2017-10-01

Nutritional deprivation or desiccation can influence thermal tolerance by impacting the insects' ability to evaporatively cool, maintain cell membrane integrity and conduct protective or repair processes. Recovery from chilling is also linked to the re-establishment of iono- and osmo-regulatory homeostasis. Here, using Mediterranean fruit fly (Ceratitis capitata, Diptera: Tephritidae), we manipulated water and nutrient availability to test the mechanistic expectation that changes in whole organism lipid and water content can elicit variation in cold or heat tolerance (scored as chill coma recovery time and heat knockdown time). We measured body condition (body water and lipid content) as well as heat shock protein 70 gene (hsp70) and protein (HSP70) levels. A significant reduction in body water content with water restriction did not translate into differences in chill coma recovery. When nutrient restriction was coupled with water deprivation, this resulted in a significant reduction (-54%) of heat knockdown time in females but male flies were unaffected. There was no evidence for an hsp70 or HSP70 response under any of the stress treatments and therefore no correlation with heat or cold tolerance. Heat hardening decreased all hsp levels. Therefore, although body water and total body lipid content differed between the treatment groups, the contribution of these factors to thermal tolerance was inconsistent with mechanistic expectations in heat knockdown time and insignificant for chill coma recovery. These results therefore highlight that the effects of resource restriction on thermal limits in insects are mechanistically more complex than previous models of stress resistance have suggested. Copyright © 2017 Elsevier Inc. All rights reserved.

Dendritic cell expression of the signaling molecule TRAF6 is required for immune tolerance in the lung

PubMed Central

Han, Daehee; Walsh, Matthew C; Kim, Kwang Soon; Hong, Sung-Wook; Lee, Junyoung; Yi, Jaeu; Rivas, Gloriany; Choi, Yongwon; Surh, Charles D

2017-01-01

Abstract Immune tolerance in the lung is important for preventing hypersensitivity, such as allergic asthma. Maintenance of tolerance in the lung is established by coordinated activities of poorly understood cellular and molecular mechanisms, including participation of dendritic cells (DCs). We have previously identified DC expression of the signaling molecule TRAF6 as a non-redundant requirement for the maintenance of immune tolerance in the small intestine of mice. Because mucosal tissues share similarities in how they interact with exogenous antigens, we examined the role of DC-expressed TRAF6 in the lung. As with the intestine, we found that the absence TRAF6 expression by DCs led to spontaneous generation of Th2-associated immune responses and increased susceptibility to model antigen-induced asthma. To examine the role of commensal microbiota, mice deficient in TRAF6 in DCs were treated with broad-spectrum antibiotics and/or re-derived on a germ-free (GF) background. Interestingly, we found that antibiotics-treated specific pathogen-free, but not GF, mice showed restored immune tolerance in the absence of DC-expressed TRAF6. We further found that antibiotics mediate microbiota-independent effects on lung T cells to promote immune tolerance in the lung. This work provides both a novel tool for studying immune tolerance in the lung and an advance in our conceptual understanding of potentially common molecular mechanisms of immune tolerance in both the intestine and the lung. PMID:28338920

β-Glucan Reverses the Epigenetic State of LPS-Induced Immunological Tolerance

PubMed Central

Novakovic, Boris; Habibi, Ehsan; Wang, Shuang-Yin; Arts, Rob J.W.; Davar, Robab; Megchelenbrink, Wout; Kim, Bowon; Kuznetsova, Tatyana; Kox, Matthijs; Zwaag, Jelle; Matarese, Filomena; van Heeringen, Simon J.; Janssen-Megens, Eva M.; Sharifi, Nilofar; Wang, Cheng; Keramati, Farid; Schoonenberg, Vivien; Flicek, Paul; Clarke, Laura; Pickkers, Peter; Heath, Simon; Gut, Ivo; Netea, Mihai G.; Martens, Joost H.A.; Logie, Colin; Stunnenberg, Hendrik G.

2018-01-01

Summary Innate immune memory is the phenomenon whereby innate immune cells such as monocytes or macrophages undergo functional reprogramming after exposure to microbial components such as lipopolysaccharide (LPS). We apply an integrated epigenomic approach to characterize the molecular events involved in LPS-induced tolerance in a time-dependent manner. Mechanistically, LPS-treated monocytes fail to accumulate active histone marks at promoter and enhancers of genes in the lipid metabolism and phagocytic pathways. Transcriptional inactivity in response to a second LPS exposure in tolerized macrophages is accompanied by failure to deposit active histone marks at promoters of tolerized genes. In contrast, β-glucan partially reverses the LPS-induced tolerance in vitro. Importantly, ex vivo β-glucan treatment of monocytes from volunteers with experimental endotoxemia re-instates their capacity for cytokine production. Tolerance is reversed at the level of distal element histone modification and transcriptional reactivation of otherwise unresponsive genes. PMID:27863248

Increases in Tolerance within Naturalistic, Self-Help Recovery Homes

PubMed Central

Olson, Brad D.; Jason, Leonard A.; Davidson, Michelle; Ferrari, Joseph R.

2011-01-01

Changes in tolerance toward others (i.e., universality/diversity measure) among 150 participants (93 women, 57 men) discharged from inpatient treatment centers randomly assigned to either a self-help, communal living setting or usual after-care and interviewed every 6 months for a 24 month period was explored. Hierarchical Linear Modeling examined the effect of condition (Therapeutic Communal Living versus Usual Care) and other moderator variables on wave trajectories of tolerance attitudes (i.e., universality/diversity scores). Over time, residents of the communal living recovery model showed significantly greater tolerance trajectories than usual care participants. Results supported the claim that residents of communal living settings unit around super-ordinate goals of overcoming substance abuse problems. Also older compared to younger residents living in a house for 6 or more months experienced the greatest increases in tolerance. Theories regarding these differential increases in tolerance, such as social contact theory and transtheoretical processes of change, are discussed. PMID:19838787

Acceptance and commitment therapy improves exercise tolerance in sedentary women.

PubMed

Ivanova, Elena; Jensen, Dennis; Cassoff, Jamie; Gu, Fei; Knäuper, Bärbel

2015-06-01

To test the efficacy of an acute intervention derived from acceptance and commitment therapy (ACT) for increasing high-intensity constant work rate (CWR) cycle exercise tolerance in a group of low-active women age 18-45 yr. The secondary goals were to examine whether ACT would reduce perceived effort and improve in-task affect during exercise and increase postexercise enjoyment. In a randomized controlled trial, 39 women were randomized to either the experimental (using ACT-based cognitive techniques and listening to music during the CWR exercise tests) or a control group (listening to music during the CWR exercise tests). Before (CWR-1) and after the intervention (CWR-2), participants completed a CWR cycle exercise test at 80% of maximal incremental work rate (Wmax) until volitional exhaustion. On average, ACT (n = 18) and control (n = 21) groups were matched for age, body mass index, weekly leisure activity scores, and Wmax (all P > 0.05). Exercise tolerance time (ETT) increased by 15% from CWR-1 to CWR-2 for the ACT group (392.05 ± 146.4 vs 459.39 ± 209.3 s; mean ± SD) and decreased by 8% (384.71 ± 120.1 vs 353.86 ± 127.9 s) for the control group (P = 0.008). RPE were lower (e.g., by 1.5 Borg 6-20 scale units at 55% of ETT, P ≤ 0.01) during CWR-2 in the ACT versus that in the control group. By contrast, ACT had no effect on in-task affect. Exercise enjoyment was higher after CWR-2 in the ACT group versus that in the control group (P < 0.001). An acute ACT intervention increased high-intensity ETT and postexercise enjoyment and reduced perceived effort in low-active women. Further investigations of ACT as an effective intervention for enhancing the established health benefits of high-intensity exercise need to be provided.

Perspectives on the relevance of the circadian time structure to workplace threshold limit values and employee biological monitoring.

PubMed

Smolensky, Michael H; Reinberg, Alain E; Sackett-Lundeen, Linda

2017-01-01

The circadian time structure (CTS) and its disruption by rotating and nightshift schedules relative to work performance, accident risk, and health/wellbeing have long been areas of occupational medicine research. Yet, there has been little exploration of the relevance of the CTS to setting short-term, time-weighted, and ceiling threshold limit values (TLVs); conducting employee biological monitoring (BM); and establishing normative reference biological exposure indices (BEIs). Numerous publications during the past six decades document the CTS substantially affects the disposition - absorption, distribution, metabolism, and elimination - and effects of medications. Additionally, laboratory animal and human studies verify the tolerance to chemical, biological (contagious), and physical agents can differ extensively according to the circadian time of exposure. Because of slow and usually incomplete CTS adjustment by rotating and permanent nightshift workers, occupational chemical and other contaminant encounters occur during a different circadian stage than for dayshift workers. Thus, the intended protection of some TLVs when working the nightshift compared to dayshift might be insufficient, especially in high-risk settings. The CTS is germane to employee BM in that large-amplitude predictable-in-time 24h variation can occur in the concentration of urine, blood, and saliva of monitored chemical contaminants and their metabolites plus biomarkers indicative of adverse xenobiotic exposure. The concept of biological time-qualified (for rhythms) reference values, currently of interest to clinical laboratory pathology practice, is seemingly applicable to industrial medicine as circadian time and workshift-specific BEIs to improve surveillance of night workers, in particular. Furthermore, BM as serial assessments performed frequently both during and off work, exemplified by employee self-measurement of lung function using a small portable peak expiratory flow meter, can easily identify intolerance before induction of pathology.

34 CFR 369.4 - What definitions apply to these programs?

Code of Federal Regulations, 2010 CFR

2010-07-01

... training in the use of prosthetic and orthotic devices; (3) Recreational therapy; (4) Physical and..., communication, self-care, self-direction, interpersonal skills, work tolerance, or work skills) in terms of an... to obtaining or retaining employment; (9) Eyeglasses and visual services, including visual training...

The effect of resting blood flow occlusion on exercise tolerance and W'.

PubMed

Broxterman, Ryan M; Craig, Jesse C; Ade, Carl J; Wilcox, Samuel L; Barstow, Thomas J

2015-09-15

It has previously been postulated that the anaerobic work capacity (W') may be utilized during resting blood flow occlusion in the absence of mechanical work. We tested the hypothesis that W' would not be utilized during an initial range of time following the onset of resting blood flow occlusion, after which W' would be utilized progressively more. Seven men completed blood flow occlusion constant power severe intensity handgrip exercise to task failure following 0, 300, 600, 900, and 1,200 s of resting blood flow occlusion. The work performed above critical power (CP) was not significantly different between the 0-, 300-, and 600-s conditions and was not significantly different from the total W' available. Significantly less work was performed above CP during the 1,200-s condition than the 900-s condition (P < 0.05), while both conditions were significantly less than the 0-, 300-, and 600-s conditions (P < 0.05). The work performed above CP during these conditions was significantly less than the total W' available (P < 0.05). The utilization of W' during resting blood flow occlusion did not begin until 751 ± 118 s, after which time W' was progressively utilized. The current findings demonstrate that W' is not utilized during the initial ∼751 s of resting blood flow occlusion, but is progressively utilized thereafter, despite no mechanical work being performed. Thus, the utilization of W' is not exclusive to exercise, and a constant amount of work that can be performed above CP is not the determining mechanism of W'. Copyright © 2015 the American Physiological Society.

Recovery after shift work: Relation to coronary risk factors in women.

PubMed

Axelsson, John; Lowden, Arne; Kecklund, Göran

2006-01-01

Shift work increases the risk for developing cardiovascular disease. There is, however, little knowledge of what aspects of shift scheduling that are detrimental and what characteristics promote good health. The aim of the present study was to evaluate whether coronary risk factors deteriorate after a hard work period and whether recovery, in the form of a week off, was sufficient to improve them. A total of 19 women worked an extremely rapidly rotating and clockwise shift schedule at a paper and pulp factory. They underwent two health examinations, one at the end of the work period and one after the week off. In addition, the women were divided into a tolerant and a vulnerable group, depending on their satisfaction with their work hours. Most risk factors did not change, but total cholesterol and low-density lipoprotein (LDL)-cholesterol were lower after the working period than after the week-off. In addition, vulnerable women had higher levels of total cholesterol and a higher ratio of total cholesterol/high-density lipoprotein (HDL) than tolerant ones. In conclusion, the finding that a week-off worsens cholesterol levels was against our hypothesis and suggests further studies on how activities/responsibilities outside the workplace affect shift-working women. It was also shown that susceptible shift workers had worse lipid profiles.

Competitive ability, stress tolerance and plant interactions along stress gradients.

PubMed

Qi, Man; Sun, Tao; Xue, SuFeng; Yang, Wei; Shao, DongDong; Martínez-López, Javier

2018-04-01

Exceptions to the generality of the stress-gradient hypothesis (SGH) may be reconciled by considering species-specific traits and stress tolerance strategies. Studies have tested stress tolerance and competitive ability in mediating interaction outcomes, but few have incorporated this to predict how species interactions shift between competition and facilitation along stress gradients. We used field surveys, salt tolerance and competition experiments to develop a predictive model interspecific interaction shifts across salinity stress gradients. Field survey and greenhouse tolerance tests revealed tradeoffs between stress tolerance and competitive ability. Modeling showed that along salinity gradients, (1) plant interactions shifted from competition to facilitation at high salinities within the physiological limits of salt-intolerant plants, (2) facilitation collapsed when salinity stress exceeded the physiological tolerance of salt-intolerant plants, and (3) neighbor removal experiments overestimate interspecific facilitation by including intraspecific effects. A community-level field experiment, suggested that (1) species interactions are competitive in benign and, facilitative in harsh condition, but fuzzy under medium environmental stress due to niche differences of species and weak stress amelioration, and (2) the SGH works on strong but not weak stress gradients, so SGH confusion arises when it is applied across questionable stress gradients. Our study clarifies how species interactions vary along stress gradients. Moving forward, focusing on SGH applications rather than exceptions on weak or nonexistent gradients would be most productive. © 2018 by the Ecological Society of America.

Use of skin temperature to predict tolerance to thermal environments.

DOT National Transportation Integrated Search

1971-01-01

Skin temperature is a sensitive index of the effect of the thermal environment on the seminude man. Skin temperatures and tolerance times from several studies have been utilized in an attempt to establish a relationship between (1) final skin tempera...

Aerobic fitness and orthostatic tolerance: Evidence against an association

NASA Technical Reports Server (NTRS)

Ebert, Thomas J.

1994-01-01

This presentation will focus on only one side of the debate as to whether high levels of aerobic fitness have a deleterious effect on tolerance to gravitational stress. This issue was raised in the early 1970's as a result of two research publications. The first work investigated the carotid sinus baroreflex of humans with an airtight chamber that surrounded the head and neck. The steady-state reflex changes in blood pressure that were recorded 3 minutes after application of the head and neck stimuli, were attenuated in an athletic group compared to a sedentary group of volunteers. A second report in the NASA literature indicated that five endurance-trained runners were less tolerant to LBNP than five nonrunners. These early research findings have stimulated a considerable amount of interest that has lead to a growing number of research efforts seeking an association between aerobic fitness and orthostatic tolerance in humans. I will briefly review some of the more pertinent published research information which suggests that there is no relationship between aerobic fitness and orthostatic tolerance in humans.

The Yeast HAL1 Gene Improves Salt Tolerance of Transgenic Tomato1

PubMed Central

Gisbert, Carmina; Rus, Ana M.; Bolarín, M. Carmen; López-Coronado, J. Miguel; Arrillaga, Isabel; Montesinos, Consuelo; Caro, Manuel; Serrano, Ramon; Moreno, Vicente

2000-01-01

Overexpression of the HAL1 gene in yeast has a positive effect on salt tolerance by maintaining a high internal K+ concentration and decreasing intracellular Na+ during salt stress. In the present work, the yeast gene HAL1 was introduced into tomato (Lycopersicon esculentum Mill.) by Agrobacterium tumefaciens-mediated transformation. A sample of primary transformants was self-pollinated, and progeny from both transformed and non-transformed plants (controls) were evaluated for salt tolerance in vitro and in vivo. Results from different tests indicated a higher level of salt tolerance in the progeny of two different transgenic plants bearing four copies or one copy of the HAL1 gene. In addition, measurement of the intracellular K+ to Na+ ratios showed that transgenic lines were able to retain more K+ than the control under salt stress. Although plants and yeast cannot be compared in an absolute sense, these results indicate that the mechanism controlling the positive effect of the HAL1 gene on salt tolerance may be similar in transgenic plants and yeast. PMID:10806256

Final Project Report. Scalable fault tolerance runtime technology for petascale computers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krishnamoorthy, Sriram; Sadayappan, P

With the massive number of components comprising the forthcoming petascale computer systems, hardware failures will be routinely encountered during execution of large-scale applications. Due to the multidisciplinary, multiresolution, and multiscale nature of scientific problems that drive the demand for high end systems, applications place increasingly differing demands on the system resources: disk, network, memory, and CPU. In addition to MPI, future applications are expected to use advanced programming models such as those developed under the DARPA HPCS program as well as existing global address space programming models such as Global Arrays, UPC, and Co-Array Fortran. While there has been amore » considerable amount of work in fault tolerant MPI with a number of strategies and extensions for fault tolerance proposed, virtually none of advanced models proposed for emerging petascale systems is currently fault aware. To achieve fault tolerance, development of underlying runtime and OS technologies able to scale to petascale level is needed. This project has evaluated range of runtime techniques for fault tolerance for advanced programming models.« less

Silicone ring versus pneumatic cuff tourniquet: a comparative quantitative study in healthy individuals.

PubMed

Drosos, Georgios I; Stavropoulos, Nikolaos I; Kazakos, Konstantinos; Tripsianis, Grigorios; Ververidis, Athanasios; Verettas, Dionisios-Alexandros

2011-04-01

The aim of the present study was to compare a new silicone ring tourniquet (SRT) with a classic pneumatic cuff tourniquet (PT) in terms of tolerance and recovery time following their use in healthy volunteers. Both tourniquets were applied in the arm and thigh of 15 healthy unmedicated volunteers. PT pressure was kept at 100 mmHg above the systolic blood pressure. The appropriate model of the SRT was used according to the systolic blood pressure. Pain was assessed by visual analogue scale and arterial blood pressure, pulse rate and oxygen saturation were monitored in all volunteers. There was no statistically significant difference in tolerance time between SRT and PT in the arm (19.13 vs. 18.25 min) and thigh (21.52 vs. 21.39 min) nor in recovery time between the two devices. The SRT performed similarly to the classic PT in terms of tolerance and recovery time when applied in the arm and thigh of unmedicated healthy volunteers.

Cadmium tolerance and accumulation of Althaea rosea Cav. and its potential as a hyperaccumulator under chemical enhancement.

PubMed

Liu, Jia Nv; Zhou, Qi Xing; Wang, Song; Sun, Ting

2009-02-01

The role of ornamental plants has drawn much attention as the urban pollution levels exacerbate. Althaea rosea Cav. had showed its strong tolerance and accumulation ability of Cd in our previous work, thus, the effects of ethylenediamine triacetic acid (EDTA), ethylenegluatarotriacetic acid (EGTA) and sodium dodecyl sulfate (SDS) on its Cd phytoremediation capacity were further investigated in this work. It reconfirmed that the species had strong tolerance and accumulation ability of Cd. Particularly, the species can be regarded as a potential Cd-hyperaccumulator through applying chemical agents. However, different chelators and surfactants had great differences in affecting hyperaccumulating characteristics of the species. EGTA and SDS could not only increase the dry biomass of the plants, but also promote Cd accumulation in shoots and roots. On the contrary, EDTA was toxic to the species by restraining the growth of plants, although it could promote Cd accumulation in shoots and roots of the plants to a certain extent. Thus, EGTA and SDS were effective in enhancing phytoremediation with Althaea rosea Cav. for Cd contaminated soils, while EDTA is ineffective in this regard.

Fault-tolerant, high-level quantum circuits: form, compilation and description

NASA Astrophysics Data System (ADS)

Paler, Alexandru; Polian, Ilia; Nemoto, Kae; Devitt, Simon J.

2017-06-01

Fault-tolerant quantum error correction is a necessity for any quantum architecture destined to tackle interesting, large-scale problems. Its theoretical formalism has been well founded for nearly two decades. However, we still do not have an appropriate compiler to produce a fault-tolerant, error-corrected description from a higher-level quantum circuit for state-of the-art hardware models. There are many technical hurdles, including dynamic circuit constructions that occur when constructing fault-tolerant circuits with commonly used error correcting codes. We introduce a package that converts high-level quantum circuits consisting of commonly used gates into a form employing all decompositions and ancillary protocols needed for fault-tolerant error correction. We call this form the (I)initialisation, (C)NOT, (M)measurement form (ICM) and consists of an initialisation layer of qubits into one of four distinct states, a massive, deterministic array of CNOT operations and a series of time-ordered X- or Z-basis measurements. The form allows a more flexible approach towards circuit optimisation. At the same time, the package outputs a standard circuit or a canonical geometric description which is a necessity for operating current state-of-the-art hardware architectures using topological quantum codes.

Interpopulational variation in the cold tolerance of a broadly distributed marine copepod

PubMed Central

Wallace, Gemma T.; Kim, Tiffany L.; Neufeld, Christopher J.

2014-01-01

Latitudinal trends in cold tolerance have been observed in many terrestrial ectotherms, but few studies have investigated interpopulational variation in the cold physiology of marine invertebrates. Here, the intertidal copepod Tigriopus californicus was used as a model system to study how local adaptation influences the cold tolerance of a broadly distributed marine crustacean. Among five populations spanning 18° in latitude, the following three metrics were used to compare cold tolerance: the temperature of chill-coma onset, the chill-coma recovery time and post-freezing recovery. In comparison to copepods from warmer southern latitudes, animals from northern populations exhibited lower chill-coma onset temperatures, shorter chill-coma recovery times and faster post-freezing recovery rates. Importantly, all three metrics showed a consistent latitudinal trend, suggesting that any single metric could be used equivalently in future studies investigating latitudinal variation in cold tolerance. Our results agree with previous studies showing that populations within a single species can display strong local adaptation to spatially varying climatic conditions. Thus, accounting for local adaptation in bioclimate models will be useful for understanding how broadly distributed species like T. californicus will respond to anthropogenic climate change. PMID:27293662

Interpopulational variation in the cold tolerance of a broadly distributed marine copepod.

PubMed

Wallace, Gemma T; Kim, Tiffany L; Neufeld, Christopher J

2014-01-01

Latitudinal trends in cold tolerance have been observed in many terrestrial ectotherms, but few studies have investigated interpopulational variation in the cold physiology of marine invertebrates. Here, the intertidal copepod Tigriopus californicus was used as a model system to study how local adaptation influences the cold tolerance of a broadly distributed marine crustacean. Among five populations spanning 18° in latitude, the following three metrics were used to compare cold tolerance: the temperature of chill-coma onset, the chill-coma recovery time and post-freezing recovery. In comparison to copepods from warmer southern latitudes, animals from northern populations exhibited lower chill-coma onset temperatures, shorter chill-coma recovery times and faster post-freezing recovery rates. Importantly, all three metrics showed a consistent latitudinal trend, suggesting that any single metric could be used equivalently in future studies investigating latitudinal variation in cold tolerance. Our results agree with previous studies showing that populations within a single species can display strong local adaptation to spatially varying climatic conditions. Thus, accounting for local adaptation in bioclimate models will be useful for understanding how broadly distributed species like T. californicus will respond to anthropogenic climate change.

Fuel Cycle Research and Development Accident Tolerant Fuels Series 1 (ATF-1) Irradiation Testing FY 2016 Status Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Core, Gregory Matthew

This report contains a summary of irradiation testing of Fuel Cycle Research and Development (FCRD) Accident Tolerant Fuels Series 1 (ATF 1) experiments performed at Idaho National Laboratory (INL) in FY 2016. ATF 1 irradiation testing work performed in FY 2016 included design, analysis, and fabrication of ATF-1B drop in capsule ATF 1 series experiments and irradiation testing of ATF-1 capsules in the ATR.

Time-dependent relation between smoking cessation and improved exercise tolerance in apparently healthy middle-age men and women.

PubMed

Berkovitch, Anat; Kivity, Shaye; Klempfner, Robert; Segev, Shlomo; Milwidsky, Assi; Goldenberg, Ilan; Sidi, Yechezkel; Maor, Elad

2015-06-01

Smoking is an independent cardiovascular risk factor and correlates with reduced exercise tolerance. However, data on the time dependent effect of smoking cessation on exercise tolerance are limited. We investigated 17,115 men and women who were annually screened at the Institute for Medical Screening of the Chaim Sheba Medical Centre. All subjects had their smoking status documented and performed an exercise stress testing (EST) according to Bruce protocol at each visit. Subjects were divided at baseline into four groups: active smokers (N = 2858), recent quitters (smoking cessation ≤2 years before baseline EST; N = 861), remote quitters (smoking cessation >2 years before the baseline EST; N = 3856) and never smokers (N = 9810). Baseline and follow up EST duration were compared among the four groups. Recent quitters demonstrated a 2.4-fold improvement in their EST duration compared with active smokers (improvement of 24 ± 157 vs. 10 ± 157 s, respectively, p = 0.02). Multivariate logistic regression showed that recent quitters were 26% more likely to improve their exercise tolerance compared with active smokers (95% confidence interval (CI) 1.08-1.47, p = 0.003). Assessing smoking status as a time-dependent covariate during four consecutive visits demonstrated that recent quitters were 17% more likely to improve their exercise tolerance compared with active smokers (95% CI 1.02-1.34, p = 0.02), with a less pronounced benefit among remote quitters (hazard ratio = 1.11, 95% CI 1.02-1.21; p = 0.01). Smoking cessation is independently associated with improved exercise tolerance. The benefits of smoking cessation are evident within the first two years of abstinence. © The European Society of Cardiology 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Improved catalytic efficiency, thermophilicity, anti-salt and detergent tolerance of keratinase KerSMD by partially truncation of PPC domain

PubMed Central

Fang, Zhen; Zhang, Juan; Du, Guocheng; Chen, Jian

2016-01-01

The keratinase from Stenotrophomonas maltophilia (KerSMD) is known for its high activity and pH stability in keratin degradation. However, catalytic efficiency and detergent tolerability need to be improved in order to be used for industrial application. In this work, we obtained several keratinase variants with enhanced catalytic efficiency, thermophilicity, and anti-salt and detergent tolerability by partially truncating the PPC domain of KerSMD. The variants all showed improved catalytic efficiency to synthetic substrate AAPF, with the V355 variant having the highest kcat /Km value of 143.6 s−1 mM−1. The truncation of keratinase had little effect on alkaline stability but obviously decreased collagenase activity, developing its potential application in leather treatment. The variants V380, V370, and V355 were thermophilic, with a 1.7-fold enhancement of keratinlytic activity at 60 °C when compared to the wild type. The entire truncation of PPC domain obtained the variant V355 with improved tolerance to alkalinity, salt, chaotropic agents, and detergents. The V355 variant showed more than a 40% improvement in activity under 15% (w/v) NaCl or 4% (w/v) SDS solution, showing excellent stability under harsh washing and unhairing conditions. Our work investigated how protein engineering affects the function of PPC domain of KerSMD. PMID:27298079

Improved catalytic efficiency, thermophilicity, anti-salt and detergent tolerance of keratinase KerSMD by partially truncation of PPC domain.

PubMed

Fang, Zhen; Zhang, Juan; Du, Guocheng; Chen, Jian

2016-06-14

The keratinase from Stenotrophomonas maltophilia (KerSMD) is known for its high activity and pH stability in keratin degradation. However, catalytic efficiency and detergent tolerability need to be improved in order to be used for industrial application. In this work, we obtained several keratinase variants with enhanced catalytic efficiency, thermophilicity, and anti-salt and detergent tolerability by partially truncating the PPC domain of KerSMD. The variants all showed improved catalytic efficiency to synthetic substrate AAPF, with the V355 variant having the highest kcat /Km value of 143.6 s(-1) mM(-1). The truncation of keratinase had little effect on alkaline stability but obviously decreased collagenase activity, developing its potential application in leather treatment. The variants V380, V370, and V355 were thermophilic, with a 1.7-fold enhancement of keratinlytic activity at 60 °C when compared to the wild type. The entire truncation of PPC domain obtained the variant V355 with improved tolerance to alkalinity, salt, chaotropic agents, and detergents. The V355 variant showed more than a 40% improvement in activity under 15% (w/v) NaCl or 4% (w/v) SDS solution, showing excellent stability under harsh washing and unhairing conditions. Our work investigated how protein engineering affects the function of PPC domain of KerSMD.

Performance Evaluation of Various STL File Mesh Refining Algorithms Applied for FDM-RP Process

NASA Astrophysics Data System (ADS)

Ledalla, Siva Rama Krishna; Tirupathi, Balaji; Sriram, Venkatesh

2018-06-01

Layered manufacturing machines use the stereolithography (STL) file to build parts. When a curved surface is converted from a computer aided design (CAD) file to STL, it results in a geometrical distortion and chordal error. Parts manufactured with this file, might not satisfy geometric dimensioning and tolerance requirements due to approximated geometry. Current algorithms built in CAD packages have export options to globally reduce this distortion, which leads to an increase in the file size and pre-processing time. In this work, different mesh subdivision algorithms are applied on STL file of a complex geometric features using MeshLab software. The mesh subdivision algorithms considered in this work are modified butterfly subdivision technique, loops sub division technique and general triangular midpoint sub division technique. A comparative study is made with respect to volume and the build time using the above techniques. It is found that triangular midpoint sub division algorithm is more suitable for the geometry under consideration. Only the wheel cap part is then manufactured on Stratasys MOJO FDM machine. The surface roughness of the part is measured on Talysurf surface roughness tester.

MO-FG-202-01: A Fast Yet Sensitive EPID-Based Real-Time Treatment Verification System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahmad, M; Nourzadeh, H; Neal, B

2016-06-15

Purpose: To create a real-time EPID-based treatment verification system which robustly detects treatment delivery and patient attenuation variations. Methods: Treatment plan DICOM files sent to the record-and-verify system are captured and utilized to predict EPID images for each planned control point using a modified GPU-based digitally reconstructed radiograph algorithm which accounts for the patient attenuation, source energy fluence, source size effects, and MLC attenuation. The DICOM and predicted images are utilized by our C++ treatment verification software which compares EPID acquired 1024×768 resolution frames acquired at ∼8.5hz from Varian Truebeam™ system. To maximize detection sensitivity, image comparisons determine (1) ifmore » radiation exists outside of the desired treatment field; (2) if radiation is lacking inside the treatment field; (3) if translations, rotations, and magnifications of the image are within tolerance. Acquisition was tested with known test fields and prior patient fields. Error detection was tested in real-time and utilizing images acquired during treatment with another system. Results: The computational time of the prediction algorithms, for a patient plan with 350 control points and 60×60×42cm^3 CT volume, is 2–3minutes on CPU and <27 seconds on GPU for 1024×768 images. The verification software requires a maximum of ∼9ms and ∼19ms for 512×384 and 1024×768 resolution images, respectively, to perform image analysis and dosimetric validations. Typical variations in geometric parameters between reference and the measured images are 0.32°for gantry rotation, 1.006 for scaling factor, and 0.67mm for translation. For excess out-of-field/missing in-field fluence, with masks extending 1mm (at isocenter) from the detected aperture edge, the average total in-field area missing EPID fluence was 1.5mm2 the out-of-field excess EPID fluence was 8mm^2, both below error tolerances. Conclusion: A real-time verification software, with EPID images prediction algorithm, was developed. The system is capable of performing verifications between frames acquisitions and identifying source(s) of any out-of-tolerance variations. This work was supported in part by Varian Medical Systems.« less

Error Mitigation of Point-to-Point Communication for Fault-Tolerant Computing

NASA Technical Reports Server (NTRS)

Akamine, Robert L.; Hodson, Robert F.; LaMeres, Brock J.; Ray, Robert E.

2011-01-01

Fault tolerant systems require the ability to detect and recover from physical damage caused by the hardware s environment, faulty connectors, and system degradation over time. This ability applies to military, space, and industrial computing applications. The integrity of Point-to-Point (P2P) communication, between two microcontrollers for example, is an essential part of fault tolerant computing systems. In this paper, different methods of fault detection and recovery are presented and analyzed.

New water-soluble metal working fluids additives from phosphonic acid derivatives for aluminum alloy materials.

PubMed

Kohara, Ichitaro; Tomoda, Hideyuki; Watanabe, Shoji

2007-01-01

Water-soluble metal working fluids are used for processing of aluminum alloy materials. This short paper describes properties of new additives for water-soluble cutting fluids for aluminum alloy materials. Some alkyldiphosphonic acids were prepared with known method. Amine salts of these phosphonic acids showed anti-corrosion property for aluminum alloy materials. However, they have no hard water tolerance. Monoesters of octylphosphonic acid were prepared by the reaction of octylphosphonic acid dichloride with various alcohols in the presence of triethylamine. Amine salts of monoester of octylphosphonic acid with diethyleneglycol monomethyl ether, ethyleneglycol monomethyl ether and triethyleneglycol monomethyl ether showed both of a good anti-corrosion property for aluminum alloy materials and hard water tolerance.

The Influence of Passive Acceleration and Exercise+Acceleration on Work Capacity and Orthostasis

NASA Technical Reports Server (NTRS)

Simonson, S. R.; Cowell, S. A.; Stocks, J. M.; Biagini, H. W.; Vener, J. M.; Evetts, S. N.; Bailey, K. N.; Evans, J.; Knapp, C.; Greenleaf, J. E.

1999-01-01

The losses of aerobic power and orthostatic tolerance are significant effects of manned C) spaceflight that can negatively impact crew health and safety. Daily acceleration and aerobic training may ameliorate these effects. To determine the influence of passive intermittent +Gz acceleration (PA) training and active acceleration + interval exercise (AE) training on work 0 0 capacity and the acute (1 min) response to 70 deg head-up tilt, 6 men (X-Bar SD: age, 33 +/- 6 y; height, 178.3 +/- 4.6 cm; mass, 86.3 +/- 6.6 kg) participated in two 3-wk training protocols. It was hypothesized that PA and AE training would improve orthostatic tolerance and that the addition of aerobic conditioning, would not alter this effect.

Tolerance to cocaine's effects on schedule-controlled behavior: role of delay between pause-ending responses and reinforcement.

PubMed

Macaskill, Anne C; Branch, Marc N

2012-01-01

The schedule of reinforcement under which behavior is maintained is an important contributor to whether tolerance to the behavioral effects of cocaine develops. Schedule parameter value (for example, fixed-ratio size) has been shown to affect the development of tolerance under some schedule types but not others, but the specific procedural variables causing this effect remain to be identified. To date, schedule-parameter-related tolerance has developed when a longer pause after reinforcement does not lead to a shorter delay between the response that ends the pause and reinforcement. The current study investigated the importance of this variable in pigeons using a multiple chained Fixed-Ratio 1, Fixed-Time x schedule, in which the first key peck in a trial produced a stimulus change and initiated a delay at the end of which food was presented regardless of whether or not additional pecks were made during the delay. Dose-response curves were assessed before, during and after chronic (daily) administration of cocaine. Tolerance to the pause-increasing effects of cocaine occurred to a similar degree regardless of the scheduled time between the end of the pause and reinforcement. Therefore, the relationship between pause length and delay to reinforcement does not provide an explanation for schedule-parameter-related tolerance. Copyright © 2011 Elsevier Inc. All rights reserved.

Biomechanical tolerance of whole lumbar spines in straightened posture subjected to axial acceleration.

PubMed

Stemper, Brian D; Chirvi, Sajal; Doan, Ninh; Baisden, Jamie L; Maiman, Dennis J; Curry, William H; Yoganandan, Narayan; Pintar, Frank A; Paskoff, Glenn; Shender, Barry S

2018-06-01

Quantification of biomechanical tolerance is necessary for injury prediction and protection of vehicular occupants. This study experimentally quantified lumbar spine axial tolerance during accelerative environments simulating a variety of military and civilian scenarios. Intact human lumbar spines (T12-L5) were dynamically loaded using a custom-built drop tower. Twenty-three specimens were tested at sub-failure and failure levels consisting of peak axial forces between 2.6 and 7.9 kN and corresponding peak accelerations between 7 and 57 g. Military aircraft ejection and helicopter crashes fall within these high axial acceleration ranges. Testing was stopped following injury detection. Both peak force and acceleration were significant (p < 0.0001) injury predictors. Injury probability curves using parametric survival analysis were created for peak acceleration and peak force. Fifty-percent probability of injury (95%CI) for force and acceleration were 4.5 (3.9-5.2 kN), and 16 (13-19 g). A majority of injuries affected the L1 spinal level. Peak axial forces and accelerations were greater for specimens that sustained multiple injuries or injuries at L2-L5 spinal levels. In general, force-based tolerance was consistent with previous shorter-segment lumbar spine testing (3-5 vertebrae), although studies incorporating isolated vertebral bodies reported higher tolerance attributable to a different injury mechanism involving structural failure of the cortical shell. This study identified novel outcomes with regard to injury patterns, wherein more violent exposures produced more injuries in the caudal lumbar spine. This caudal migration was likely attributable to increased injury tolerance at lower lumbar spinal levels and a faster inertial mass recruitment process for high rate load application. Published 2017. This article is a U.S. Government work and is in the public domain in the USA. J Orthop Res 36:1747-1756, 2018. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Materials and processes laboratory composite materials characterization task, part 1. Damage tolerance

NASA Technical Reports Server (NTRS)

Nettles, A. T.; Tucker, D. S.; Patterson, W. J.; Franklin, S. W.; Gordon, G. H.; Hart, L.; Hodge, A. J.; Lance, D. G.; Russel, S. S.

1991-01-01

A test run was performed on IM6/3501-6 carbon-epoxy in which the material was processed, machined into specimens, and tested for damage tolerance capabilities. Nondestructive test data played a major role in this element of composite characterization. A time chart was produced showing the time the composite material spent within each Branch or Division in order to identify those areas which produce a long turnaround time. Instrumented drop weight testing was performed on the specimens with nondestructive evaluation being performed before and after the impacts. Destructive testing in the form of cross-sectional photomicrography and compression-after-impact testing were used. Results show that the processing and machining steps needed to be performed more rapidly if data on composite material is to be collected within a reasonable timeframe. The results of the damage tolerance testing showed that IM6/3501-6 is a brittle material that is very susceptible to impact damage.

Dual-quaternion based fault-tolerant control for spacecraft formation flying with finite-time convergence.

PubMed

Dong, Hongyang; Hu, Qinglei; Ma, Guangfu

2016-03-01

Study results of developing control system for spacecraft formation proximity operations between a target and a chaser are presented. In particular, a coupled model using dual quaternion is employed to describe the proximity problem of spacecraft formation, and a nonlinear adaptive fault-tolerant feedback control law is developed to enable the chaser spacecraft to track the position and attitude of the target even though its actuator occurs fault. Multiple-task capability of the proposed control system is further demonstrated in the presence of disturbances and parametric uncertainties as well. In addition, the practical finite-time stability feature of the closed-loop system is guaranteed theoretically under the designed control law. Numerical simulation of the proposed method is presented to demonstrate the advantages with respect to interference suppression, fast tracking, fault tolerant and practical finite-time stability. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Distributed fault-tolerant time-varying formation control for high-order linear multi-agent systems with actuator failures.

PubMed

Hua, Yongzhao; Dong, Xiwang; Li, Qingdong; Ren, Zhang

2017-11-01

This paper investigates the fault-tolerant time-varying formation control problems for high-order linear multi-agent systems in the presence of actuator failures. Firstly, a fully distributed formation control protocol is presented to compensate for the influences of both bias fault and loss of effectiveness fault. Using the adaptive online updating strategies, no global knowledge about the communication topology is required and the bounds of actuator failures can be unknown. Then an algorithm is proposed to determine the control parameters of the fault-tolerant formation protocol, where the time-varying formation feasible conditions and an approach to expand the feasible formation set are given. Furthermore, the stability of the proposed algorithm is proven based on the Lyapunov-like theory. Finally, two simulation examples are given to demonstrate the effectiveness of the theoretical results. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Difference in oxidative stress tolerance between rice cultivars estimated with chlorophyll fluorescence analysis.

PubMed

Kasajima, Ichiro

2017-04-26

Oxidative stress is considered to be involved in growth retardation of plants when they are exposed to a variety of biotic and abiotic stresses. Despite its potential importance in improving crop production, comparative studies on oxidative stress tolerance between rice (Oryza sativa L.) cultivars are limited. This work describes the difference in term of oxidative stress tolerance between 72 rice cultivars. 72 rice cultivars grown under naturally lit greenhouse were used in this study. Excised leaf discs were subjected to a low concentration of methyl viologen (paraquat), a chemical reagent known to generate reactive oxygen species in chloroplast. Chlorophyll fluorescence analysis using a two-dimensional fluorescence meter, ion leakage analysis as well as the measurement of chlorophyll contents were used to evaluate the oxidative stress tolerance of leaf discs. Furthermore, fluorescence intensities were finely analyzed based on new fluorescence theories that we have optimized. Treatment of leaf discs with methyl viologen caused differential decrease of maximum quantum yield of photosystem II (Fv/Fm) between cultivars. Decrease of Fv/Fm was also closely correlated with increase of ion leakage and decrease of chlorophyll a/b ratio. Fv/Fm was factorized into photochemical and non-photochemical parameters to classify rice cultivars into sensitive and tolerant ones. Among the 72 compared rice cultivars, the traditional cultivar Co13 was identified as the most tolerant to oxidative stress. Koshihikari, a dominant modern Japonica cultivar in Japan as well as IR58, one of the modern Indica breeding lines exhibited a strong tolerance to oxidative stress. Close correlation between Fv/Fm and chlorophyll a/b ratio provides a simple method to estimate oxidative stress tolerance, without measurement of chlorophyll fluorescence with special equipment. The fact that modern cultivars, especially major cultivars possessed tolerance to oxidative stress suggests that oxidative stress tolerance is one of the agricultural traits prerequisite for improvement of modern rice cultivars. Data presented in this study would enable breeding of rice cultivars having strong tolerance to oxidative stress.

Genetic Architecture of Aluminum Tolerance in Rice (Oryza sativa) Determined through Genome-Wide Association Analysis and QTL Mapping

PubMed Central

Famoso, Adam N.; Zhao, Keyan; Clark, Randy T.; Tung, Chih-Wei; Wright, Mark H.; Bustamante, Carlos; Kochian, Leon V.; McCouch, Susan R.

2011-01-01

Aluminum (Al) toxicity is a primary limitation to crop productivity on acid soils, and rice has been demonstrated to be significantly more Al tolerant than other cereal crops. However, the mechanisms of rice Al tolerance are largely unknown, and no genes underlying natural variation have been reported. We screened 383 diverse rice accessions, conducted a genome-wide association (GWA) study, and conducted QTL mapping in two bi-parental populations using three estimates of Al tolerance based on root growth. Subpopulation structure explained 57% of the phenotypic variation, and the mean Al tolerance in Japonica was twice that of Indica. Forty-eight regions associated with Al tolerance were identified by GWA analysis, most of which were subpopulation-specific. Four of these regions co-localized with a priori candidate genes, and two highly significant regions co-localized with previously identified QTLs. Three regions corresponding to induced Al-sensitive rice mutants (ART1, STAR2, Nrat1) were identified through bi-parental QTL mapping or GWA to be involved in natural variation for Al tolerance. Haplotype analysis around the Nrat1 gene identified susceptible and tolerant haplotypes explaining 40% of the Al tolerance variation within the aus subpopulation, and sequence analysis of Nrat1 identified a trio of non-synonymous mutations predictive of Al sensitivity in our diversity panel. GWA analysis discovered more phenotype–genotype associations and provided higher resolution, but QTL mapping identified critical rare and/or subpopulation-specific alleles not detected by GWA analysis. Mapping using Indica/Japonica populations identified QTLs associated with transgressive variation where alleles from a susceptible aus or indica parent enhanced Al tolerance in a tolerant Japonica background. This work supports the hypothesis that selectively introgressing alleles across subpopulations is an efficient approach for trait enhancement in plant breeding programs and demonstrates the fundamental importance of subpopulation in interpreting and manipulating the genetics of complex traits in rice. PMID:21829395

Translational Applications of Nanodiamonds: From Biocompatibility to Theranostics

NASA Astrophysics Data System (ADS)

Moore, Laura Kent

Nanotechnology marks the next phase of development for drug delivery, contrast agents and gene therapy. For these novel systems to achieve success in clinical translation we must see that they are both effective and safe. Diamond nanoparticles, also known as nanodiamonds (NDs), have been gaining popularity as molecular delivery vehicles over the last decade. The uniquely faceted, carbon nanoparticles possess a number of beneficial properties that are being harnessed for applications ranging from small-molecule drug delivery to biomedical imaging and gene therapy. In addition to improving the effectiveness of a variety of therapeutics and contrast agents, initial studies indicate that NDs are biocompatible. In this work we evaluate the translational potential of NDs by demonstrating efficacy in molecular delivery and scrutinizing particle tolerance. Previous work has demonstrated that NDs are effective vehicles for the delivery of anthracycline chemotherapeutics and gadolinium(III) based contrast agents. We have sought to enhance the gains made in both areas through the addition of active targeting. We find that ND-mediated targeted delivery of epirubicin to triple negative breast cancers induces tumor regression and virtually eliminates drug toxicities. Additionally, ND-mediated delivery of the MRI contrast agent ProGlo boosts the per gadolinium relaxivity four fold, eliminates water solubility issues and effectively labels progesterone receptor expressing breast cancer cells. Both strategies open the door to the development of targeted, theranostic constructs based on NDs, capable of treating and labeling breast cancers at the same time. Although we have seen that NDs are effective vehicles for molecular delivery, for any nanoparticle to achieve clinical utility it must be biocompatible. Preliminary research has shown that NDs are non-toxic, however only a fraction of the ND-subtypes have been evaluated. Here we present an in depth analysis of the cellular response to multiple subtypes of NDs, including pristine, amine functionalized, fluorescent and daunorubicin-loaded NDs. Furthermore, we present the most comprehensive analysis of in vivo tolerance of nanodiamonds to date. We find that NDs, regardless of subtype, are non-toxic to multiple cell types. Furthermore, we find that NDs are well tolerated by mice and rats at both acute and sub-acute time frames. These results indicate that NDs are biocompatible and will serve as the foundation for future clinical translation of diamond-based imaging, therapeutic or theranostic agents.

Fixed or Rotating Night Shift Work Undertaken by Women: Implications for Fertility and Miscarriage.

PubMed

Fernandez, Renae C; Marino, Jennifer L; Varcoe, Tamara J; Davis, Scott; Moran, Lisa J; Rumbold, Alice R; Brown, Hannah M; Whitrow, Melissa J; Davies, Michael J; Moore, Vivienne M

2016-03-01

This review summarizes the evidence concerning effects of night shift work on women's reproductive health, specifically difficulty in conceiving and miscarriage. We distinguish between fixed night shift and rotating night shift, as the population subgroups exposed, the social and biological mechanisms, and the magnitude of effects are likely to differ; of note, women working fixed night shift are known to have high tolerance for this schedule. We identified two relevant systematic reviews with meta-analyses and five additional studies. Night shift work may give rise to menstrual cycle disturbances, but effect sizes are imprecise. Endometriosis may be elevated in night shift workers, but evidence is only preliminary. Adequate data are lacking to assess associations between night shift work and infertility or time to pregnancy. The weight of evidence begins to point to working at night, whether in fixed or rotating shifts, as a risk factor for miscarriage. There are many methodological problems with this literature, with substantial variation in the definitions of night shift and schedule types making comparisons between studies difficult and pooling across studies questionable. Nevertheless, there appears to be grounds for caution and counselling where women have concerns about night shift work and their reproductive health. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Stochastic Stability of Nonlinear Sampled Data Systems with a Jump Linear Controller

NASA Technical Reports Server (NTRS)

Gonzalez, Oscar R.; Herencia-Zapana, Heber; Gray, W. Steven

2004-01-01

This paper analyzes the stability of a sampled- data system consisting of a deterministic, nonlinear, time- invariant, continuous-time plant and a stochastic, discrete- time, jump linear controller. The jump linear controller mod- els, for example, computer systems and communication net- works that are subject to stochastic upsets or disruptions. This sampled-data model has been used in the analysis and design of fault-tolerant systems and computer-control systems with random communication delays without taking into account the inter-sample response. To analyze stability, appropriate topologies are introduced for the signal spaces of the sampled- data system. With these topologies, the ideal sampling and zero-order-hold operators are shown to be measurable maps. This paper shows that the known equivalence between the stability of a deterministic, linear sampled-data system and its associated discrete-time representation as well as between a nonlinear sampled-data system and a linearized representation holds even in a stochastic framework.

A Modular Low-Complexity ECG Delineation Algorithm for Real-Time Embedded Systems.

PubMed

Bote, Jose Manuel; Recas, Joaquin; Rincon, Francisco; Atienza, David; Hermida, Roman

2018-03-01

This work presents a new modular and low-complexity algorithm for the delineation of the different ECG waves (QRS, P and T peaks, onsets, and end). Involving a reduced number of operations per second and having a small memory footprint, this algorithm is intended to perform real-time delineation on resource-constrained embedded systems. The modular design allows the algorithm to automatically adjust the delineation quality in runtime to a wide range of modes and sampling rates, from a ultralow-power mode when no arrhythmia is detected, in which the ECG is sampled at low frequency, to a complete high-accuracy delineation mode, in which the ECG is sampled at high frequency and all the ECG fiducial points are detected, in the case of arrhythmia. The delineation algorithm has been adjusted using the QT database, providing very high sensitivity and positive predictivity, and validated with the MIT database. The errors in the delineation of all the fiducial points are below the tolerances given by the Common Standards for Electrocardiography Committee in the high-accuracy mode, except for the P wave onset, for which the algorithm is above the agreed tolerances by only a fraction of the sample duration. The computational load for the ultralow-power 8-MHz TI MSP430 series microcontroller ranges from 0.2% to 8.5% according to the mode used.

Stimulus-triggered enhancement of chilling tolerance in zebrafish embryos

PubMed Central

Szabó, Katalin; Budai, Csilla; Losonczi, Eszter; Bernáth, Gergely; Csenki-Bakos, Zsolt; Urbányi, Béla; Pribenszky, Csaba; Horváth, Ákos; Cserepes, Judit

2017-01-01

Background Cryopreservation of zebrafish embryos is still an unsolved problem despite market demand and massive efforts to preserve genetic variation among numerous existing lines. Chilled storage of embryos might be a step towards developing successful cryopreservation, but no methods to date have worked. Methods In the present study, we applied a novel strategy to improve the chilling tolerance of zebrafish embryos by introducing a preconditioning hydrostatic pressure treatment to the embryos. In our experiments, 26-somites and Prim-5 stage zebrafish embryos were chilled at 0°C for 24 hours after preconditioning. Embryo survival rate, ability to reach maturation and fertilizing capacity were tested. Results Our results indicate that applied preconditioning technology made it possible for the chilled embryos to develop normally until maturity, and to produce healthy offspring as normal, thus passing on their genetic material successfully. Treated embryos had a significantly higher survival and better developmental rate, moreover the treated group had a higher ratio of normal morphology during continued development. While all controls from chilled embryos died by 30 day-post-fertilization, the treated group reached maturity (~90–120 days) and were able to reproduce, resulting in offspring in expected quantity and quality. Conclusions Based on our results, we conclude that the preconditioning technology represents a significant improvement in zebrafish embryo chilling tolerance, thus enabling a long-time survival. Furthermore, as embryonic development is arrested during chilled storage this technology also provides a solution to synchronize or delay the development. PMID:28166301

Incipient balancing selection through adaptive loss of aquaporins in natural Saccharomyces cerevisiae populations.

PubMed

Will, Jessica L; Kim, Hyun Seok; Clarke, Jessica; Painter, John C; Fay, Justin C; Gasch, Audrey P

2010-04-01

A major goal in evolutionary biology is to understand how adaptive evolution has influenced natural variation, but identifying loci subject to positive selection has been a challenge. Here we present the adaptive loss of a pair of paralogous genes in specific Saccharomyces cerevisiae subpopulations. We mapped natural variation in freeze-thaw tolerance to two water transporters, AQY1 and AQY2, previously implicated in freeze-thaw survival. However, whereas freeze-thaw-tolerant strains harbor functional aquaporin genes, the set of sensitive strains lost aquaporin function at least 6 independent times. Several genomic signatures at AQY1 and/or AQY2 reveal low variation surrounding these loci within strains of the same haplotype, but high variation between strain groups. This is consistent with recent adaptive loss of aquaporins in subgroups of strains, leading to incipient balancing selection. We show that, although aquaporins are critical for surviving freeze-thaw stress, loss of both genes provides a major fitness advantage on high-sugar substrates common to many strains' natural niche. Strikingly, strains with non-functional alleles have also lost the ancestral requirement for aquaporins during spore formation. Thus, the antagonistic effect of aquaporin function-providing an advantage in freeze-thaw tolerance but a fitness defect for growth in high-sugar environments-contributes to the maintenance of both functional and nonfunctional alleles in S. cerevisiae. This work also shows that gene loss through multiple missense and nonsense mutations, hallmarks of pseudogenization presumed to emerge after loss of constraint, can arise through positive selection.

Higher miRNA Tolerance in Immortal Li-Fraumeni Fibroblasts with Abrogated Interferon Signaling Pathway

PubMed Central

Li, Qunfang; Tainsky, Michael A.

2013-01-01

The IFN pathway is abrogated in fibroblasts from Li-Fraumeni syndrome (LFS) patients during spontaneous cellular immortalization, a necessary step in carcinogenesis. Microarray profiling of differentially expressed microRNAs (miRNA) revealed that most miRNAs were upregulated in IFN pathway–defective MDAH087-10 fibroblasts compared with MDAH087-N cells with relatively normal IFN signaling. Overexpression of Dicer, a critical enzyme in miRNA biogenesis, promoted cell growth and colony formation in MDAH087-10 cells. However, double-stranded miRNA produced by Dicer enhanced the expression of IFN-stimulated genes in MDAH087-N cells resulting in significant cell death and reduced cell growth. Furthermore, manipulation of the IFN pathway in immortal LFS fibroblasts through transcription factor IRF7 reversed their response to Dicer overexpression due to changed IFN pathway activity. Dicer overexpressing MDAH087-N cells contained lower levels of miRNA than vector control, and conversely much higher miRNA expression was detected in Dicertransfected MDAH087-10 cells. Therefore, cells with a defective IFN pathway have a higher miRNA tolerance than cells with normal IFN pathway. This work indicates for the first time that the IFN pathway as mediated through the transcription factor IRF7 must be disrupted to permit miRNA upregulation to occur in early carcinogenesis. The IFN pathway appears to provide a checkpoint for miRNA level tolerance and its abrogation leads to cellular immortalization. PMID:21199806

Higher miRNA tolerance in immortal Li-Fraumeni fibroblasts with abrogated interferon signaling pathway.

PubMed

Li, Qunfang; Tainsky, Michael A

2011-01-01

The IFN pathway is abrogated in fibroblasts from Li-Fraumeni syndrome (LFS) patients during spontaneous cellular immortalization, a necessary step in carcinogenesis. Microarray profiling of differentially expressed microRNAs (miRNA) revealed that most miRNAs were upregulated in IFN pathway-defective MDAH087-10 fibroblasts compared with MDAH087-N cells with relatively normal IFN signaling. Overexpression of Dicer, a critical enzyme in miRNA biogenesis, promoted cell growth and colony formation in MDAH087-10 cells. However, double-stranded miRNA produced by Dicer enhanced the expression of IFN-stimulated genes in MDAH087-N cells resulting in significant cell death and reduced cell growth. Furthermore, manipulation of the IFN pathway in immortal LFS fibroblasts through transcription factor IRF7 reversed their response to Dicer overexpression due to changed IFN pathway activity. Dicer overexpressing MDAH087-N cells contained lower levels of miRNA than vector control, and conversely much higher miRNA expression was detected in Dicer-transfected MDAH087-10 cells. Therefore, cells with a defective IFN pathway have a higher miRNA tolerance than cells with normal IFN pathway. This work indicates for the first time that the IFN pathway as mediated through the transcription factor IRF7 must be disrupted to permit miRNA upregulation to occur in early carcinogenesis. The IFN pathway appears to provide a checkpoint for miRNA level tolerance and its abrogation leads to cellular immortalization. © 2011 AACR.

Females in Law Enforcement: Femininity, Competence, Attraction, and Work Acceptance.

ERIC Educational Resources Information Center

Hernandez, Ernie, Jr.

1982-01-01

Used photographs and biographical descriptions of female deputy strangers to examine effects of femininity and competence on male deputy attraction to and work acceptance of female deputies. Findings included an attraction preference for feminine-competent female deputies, and greater tolerance of feminine-incompetent female deputies for staff…

ASSESSMENT OF A SEQUENTIAL EXTRACTION PROCEDURE FOR PERTURBED LEAD-CONTAMINATED SAMPLES WITH AND WITHOUT PHOSPHOROUS AMENDMENTS

EPA Science Inventory

Sequential extraction procedures are used to determine the solid-phase association in which elements of interest exist in soil and sediment matrices. Foundational work by Tessier et al. (1) has found widespread acceptance and has worked tolerably as an operational definition for...

77 FR 20789 - Work Group on Measuring Systems for Taxis

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

.... SUMMARY: The National Institute of Standards and Technology (NIST) is forming a Work Group (WG) to develop proposals to revise the current Taximeters Code in NIST Handbook 44 (HB 44), Specifications, Tolerances, and... CONTACT: Mr. John Barton, NIST, Office of Weights and Measures, 100 Bureau Drive, Stop 2600, Gaithersburg...

40 CFR 180.463 - Quinclorac; tolerances for residues.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of the herbicide quinclorac, including its metabolites and degradates, in or on the commodities in... the herbicide quinclorac, including its metabolites and degradates, in or on the commodity in the...) Section 18 emergency exemptions. Time-limited tolerances are established for residues of the herbicide...

77 FR 48907 - Fludioxonil; Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-15

... permanent and time-limited tolerances. Interregional Research Project Number 4 (IR-4) and Syngenta Crop... pelvis in the presence of maternal toxicity. There was no quantitative or qualitative evidence of increased susceptibility to rats and rabbits following in utero exposure. There was also no quantitative or...

77 FR 75859 - Pyraflufen-Ethyl; Extension of Time-Limited Pesticide Tolerances

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... residues of pyraflufen-ethyl in or on cattle, meat byproducts; goat, meat byproducts; horse, meat byproducts; sheep, meat byproducts; and milk. Nichino America, Inc. requested the tolerance extensions under... on: Cattle, meat byproducts; goat, meat byproducts; horse, meat byproducts; sheep, meat byproducts...

Cascading Policies Provide Fault Tolerance for Pervasive Clinical Communications.

PubMed

Williams, Rose; Jalan, Srikant; Stern, Edie; Lussier, Yves A

2005-03-21

We implemented an end-to-end notification system that pushed urgent clinical laboratory results to Blackberry 7510 devices over the Nextel cellular network. We designed our system to use user roles and notification policies to abstract and execute clinical notification procedures. We anticipated some problems with dropped and non-delivered messages when the device was out-of-network, however, we did not expect the same problems in other situations like device reconnection to the network. We addressed these problems by creating cascading "fault tolerance" policies to drive notification escalation when messages timed-out or delivery failed. This paper describes our experience in providing an adaptable, fault tolerant pervasive notification system for delivering secure, critical, time-sensitive patient laboratory results.

Evolution of phenotypic plasticity and environmental tolerance of a labile quantitative character in a fluctuating environment.

PubMed

Lande, R

2014-05-01

Quantitative genetic models of evolution of phenotypic plasticity are used to derive environmental tolerance curves for a population in a changing environment, providing a theoretical foundation for integrating physiological and community ecology with evolutionary genetics of plasticity and norms of reaction. Plasticity is modelled for a labile quantitative character undergoing continuous reversible development and selection in a fluctuating environment. If there is no cost of plasticity, a labile character evolves expected plasticity equalling the slope of the optimal phenotype as a function of the environment. This contrasts with previous theory for plasticity influenced by the environment at a critical stage of early development determining a constant adult phenotype on which selection acts, for which the expected plasticity is reduced by the environmental predictability over the discrete time lag between development and selection. With a cost of plasticity in a labile character, the expected plasticity depends on the cost and on the environmental variance and predictability averaged over the continuous developmental time lag. Environmental tolerance curves derived from this model confirm traditional assumptions in physiological ecology and provide new insights. Tolerance curve width increases with larger environmental variance, but can only evolve within a limited range. The strength of the trade-off between tolerance curve height and width depends on the cost of plasticity. Asymmetric tolerance curves caused by male sterility at high temperature are illustrated. A simple condition is given for a large transient increase in plasticity and tolerance curve width following a sudden change in average environment. © 2014 The Author. Journal of Evolutionary Biology © 2014 European Society For Evolutionary Biology.

Lidocaine alleviates morphine tolerance via AMPK-SOCS3-dependent neuroinflammation suppression in the spinal cord.

PubMed

Zhang, Yan; Tao, Gao-Jian; Hu, Liang; Qu, Jie; Han, Yuan; Zhang, Guangqin; Qian, Yanning; Jiang, Chun-Yi; Liu, Wen-Tao

2017-11-02

Morphine tolerance is a clinical challenge, and its pathogenesis is closely related to the neuroinflammation mediated by Toll-like receptor 4 (TLR4). In Chinese pain clinic, lidocaine is combined with morphine to treat chronic pain. We found that lidocaine sufficiently inhibited neuroinflammation induced by morphine and improved analgesic tolerance on the basis of non-affecting pain threshold. CD-1 mice were utilized for tail-flick test to evaluate morphine tolerance. The microglial cell line BV-2 was utilized to investigate the mechanism of lidocaine. Neuroinflammation-related cytokines were measured by western blotting and real-time PCR. The level of suppressor of cytokine signaling 3 (SOCS3) and adenosine 5'-monophosphate (AMP)-activated protein kinase (AMPK)-related signaling pathway was evaluated by western blotting, real-time PCR, enzyme-linked immunosorbent assay (ELISA), and immunofluorescence staining. Lidocaine potentiated an anti-nociceptive effect of morphine and attenuated the chronic analgesic tolerance. Lidocaine suppressed morphine-induced activation of microglia and downregulated inflammatory cytokines, interleukin-1β (IL-1β), and tumor necrosis factor-alpha (TNF-α) via upregulating SOCS3 by activating AMPK. Lidocaine enhanced AMPK phosphorylation in a calcium-dependent protein kinase kinase β (CaMKKβ)-dependent manner. Furthermore, lidocaine decreased the phosphorylation of p38 mitogen-activated protein kinase (MAPK) and inhibited the nuclear factor-κB (NF-κB) in accordance with the inhibitory effects to TLR4. Lidocaine as a prevalent local anesthetic suppresses morphine tolerance efficiently. AMPK-dependent upregulation of SOCS3 by lidocaine plays a crucial role in the improvement of analgesic tolerance.

Early and progressive insulin resistance in young, non-obese cancer survivors treated with hematopoietic stem cell transplantation.

PubMed

Bizzarri, Carla; Pinto, Rita M; Ciccone, Sara; Brescia, Letizia P; Locatelli, Franco; Cappa, Marco

2015-09-01

It is unclear whether there is a causative relationship between the development of metabolic syndrome (MS) and increased risk of early cardiovascular morbidity in patients receiving hematopoietic stem cell transplantation (HSCT) during childhood. Early identification of risk factors associated with insulin resistance, MS, and abnormal glucose tolerance during childhood or adolescence in these patients could represent a useful tool for preventing cardiovascular disorders. In a single-center, prospective, descriptive, cross-sectional study, we studied 45 survivors of hematological malignancies (age: 13.9 ± 4.8 years) treated with HSCT before the age of 18 years and 90 matched healthy controls. We collected clinical, imaging, and laboratory data including oral glucose tolerance test (OGTT). 7/45 patients (15.6%) showed abnormal glucose tolerance at OGTT, 1/45 (2.2%) was obese, and none fulfilled the criteria for MS. A waist/height ratio >0.5 was associated with patients with abnormal glucose tolerance (85.7% of cases), compared to patients with normal glucose tolerance (42.1%) and controls (23.3%). In patients with abnormal glucose tolerance, use of total body irradiation (TBI) as conditioning regimen was more common, and time elapsed from HSCT was longer. Patients treated with HSCT may develop insulin resistance early after transplantation. They do not show overt obesity, but have redistribution of fat tissue with central fat accumulation. The main factors associated with increased metabolic risk are TBI and time from HSCT. Evaluation of MS and glucose tolerance should be part of hormonal follow-up, which should be routinely proposed to these patients. © 2015 Wiley Periodicals, Inc.

Reactivity to negative affect in smokers: the role of implicit associations and distress tolerance in smoking cessation.

PubMed

Cameron, Amy; Reed, Kathleen Palm; Ninnemann, Andrew

2013-12-01

Avoidance of negative affect is one motivational factor that explains smoking cessation relapse during cessation attempts. This negative reinforcement model of smoking cessation and relapse has demonstrated the importance of one's ability to tolerate nicotine withdrawal symptoms, particularly negative affect states, in remaining abstinent from smoking. Distress tolerance and implicit associations are two individual constructs that may influence the strength of this relationship. In this pilot study the authors examined implicit associations related to avoidance and negative affect using a modified Implicit Association Test (IAT), a measure designed to examine implicit associations related to negative affect and avoidance, and the relationship of these associations to distress tolerance and smoking relapse. In total, 40 participants were recruited through community flyers as part of a larger smoking cessation study. Participants completed a brief smoking history, behavioral distress tolerance assessments, and the modified IAT. Smoking status was assessed via phone 3days and 6days post-quit date. Results from a Cox proportional hazard model revealed that implicit associations between avoidance and negative affect were significantly negatively correlated with time to relapse after a smoking cessation attempt, whereas the behavioral distress tolerance assessments did not predict time to relapse. This study provides novel information about the cognitive associations that may underlie avoidant behavior in smokers, and may be important for understanding smoking relapse when negative affect states are particularly difficult to tolerate. Authors discuss the importance of implicit associations in understanding smoking relapse and how they can be targeted in treatment. © 2013.

Fault Mitigation Schemes for Future Spaceflight Multicore Processors

NASA Technical Reports Server (NTRS)

Alexander, James W.; Clement, Bradley J.; Gostelow, Kim P.; Lai, John Y.

2012-01-01

Future planetary exploration missions demand significant advances in on-board computing capabilities over current avionics architectures based on a single-core processing element. The state-of-the-art multi-core processor provides much promise in meeting such challenges while introducing new fault tolerance problems when applied to space missions. Software-based schemes are being presented in this paper that can achieve system-level fault mitigation beyond that provided by radiation-hard-by-design (RHBD). For mission and time critical applications such as the Terrain Relative Navigation (TRN) for planetary or small body navigation, and landing, a range of fault tolerance methods can be adapted by the application. The software methods being investigated include Error Correction Code (ECC) for data packet routing between cores, virtual network routing, Triple Modular Redundancy (TMR), and Algorithm-Based Fault Tolerance (ABFT). A robust fault tolerance framework that provides fail-operational behavior under hard real-time constraints and graceful degradation will be demonstrated using TRN executing on a commercial Tilera(R) processor with simulated fault injections.

Efficacy of Biocides Used in the Modern Food Industry To Control Salmonella enterica, and Links between Biocide Tolerance and Resistance to Clinically Relevant Antimicrobial Compounds

PubMed Central

Condell, Orla; Iversen, Carol; Cooney, Shane; Power, Karen A.; Walsh, Ciara; Burgess, Catherine

2012-01-01

Biocides play an essential role in limiting the spread of infectious disease. The food industry is dependent on these agents, and their increasing use is a matter for concern. Specifically, the emergence of bacteria demonstrating increased tolerance to biocides, coupled with the potential for the development of a phenotype of cross-resistance to clinically important antimicrobial compounds, needs to be assessed. In this study, we investigated the tolerance of a collection of susceptible and multidrug-resistant (MDR) Salmonella enterica strains to a panel of seven commercially available food-grade biocide formulations. We explored their abilities to adapt to these formulations and their active biocidal agents, i.e., triclosan, chlorhexidine, hydrogen peroxide, and benzalkonium chloride, after sequential rounds of in vitro selection. Finally, cross-tolerance of different categories of biocidal formulations, their active agents, and the potential for coselection of resistance to clinically important antibiotics were investigated. Six of seven food-grade biocide formulations were bactericidal at their recommended working concentrations. All showed a reduced activity against both surface-dried and biofilm cultures. A stable phenotype of tolerance to biocide formulations could not be selected. Upon exposure of Salmonella strains to an active biocidal compound, a high-level of tolerance was selected for a number of Salmonella serotypes. No cross-tolerance to the different biocidal agents or food-grade biocide formulations was observed. Most tolerant isolates displayed changes in their patterns of susceptibility to antimicrobial compounds. Food industry biocides are effective against planktonic Salmonella. When exposed to sublethal concentrations of individual active biocidal agents, tolerant isolates may emerge. This emergence was associated with changes in antimicrobial susceptibilities. PMID:22367085

Efficacy of biocides used in the modern food industry to control salmonella enterica, and links between biocide tolerance and resistance to clinically relevant antimicrobial compounds.

PubMed

Condell, Orla; Iversen, Carol; Cooney, Shane; Power, Karen A; Walsh, Ciara; Burgess, Catherine; Fanning, Séamus

2012-05-01

Biocides play an essential role in limiting the spread of infectious disease. The food industry is dependent on these agents, and their increasing use is a matter for concern. Specifically, the emergence of bacteria demonstrating increased tolerance to biocides, coupled with the potential for the development of a phenotype of cross-resistance to clinically important antimicrobial compounds, needs to be assessed. In this study, we investigated the tolerance of a collection of susceptible and multidrug-resistant (MDR) Salmonella enterica strains to a panel of seven commercially available food-grade biocide formulations. We explored their abilities to adapt to these formulations and their active biocidal agents, i.e., triclosan, chlorhexidine, hydrogen peroxide, and benzalkonium chloride, after sequential rounds of in vitro selection. Finally, cross-tolerance of different categories of biocidal formulations, their active agents, and the potential for coselection of resistance to clinically important antibiotics were investigated. Six of seven food-grade biocide formulations were bactericidal at their recommended working concentrations. All showed a reduced activity against both surface-dried and biofilm cultures. A stable phenotype of tolerance to biocide formulations could not be selected. Upon exposure of Salmonella strains to an active biocidal compound, a high-level of tolerance was selected for a number of Salmonella serotypes. No cross-tolerance to the different biocidal agents or food-grade biocide formulations was observed. Most tolerant isolates displayed changes in their patterns of susceptibility to antimicrobial compounds. Food industry biocides are effective against planktonic Salmonella. When exposed to sublethal concentrations of individual active biocidal agents, tolerant isolates may emerge. This emergence was associated with changes in antimicrobial susceptibilities.

A Locus in Drosophila sechellia Affecting Tolerance of a Host Plant Toxin

PubMed Central

Hungate, Eric A.; Earley, Eric J.; Boussy, Ian A.; Turissini, David A.; Ting, Chau-Ti; Moran, Jennifer R.; Wu, Mao-Lien; Wu, Chung-I; Jones, Corbin D.

2013-01-01

Many insects feed on only one or a few types of host. These host specialists often evolve a preference for chemical cues emanating from their host and develop mechanisms for circumventing their host’s defenses. Adaptations like these are central to evolutionary biology, yet our understanding of their genetics remains incomplete. Drosophila sechellia, an emerging model for the genetics of host specialization, is an island endemic that has adapted to chemical toxins present in the fruit of its host plant, Morinda citrifolia. Its sibling species, D. simulans, and many other Drosophila species do not tolerate these toxins and avoid the fruit. Earlier work found a region with a strong effect on tolerance to the major toxin, octanoic acid, on chromosome arm 3R. Using a novel assay, we narrowed this region to a small span near the centromere containing 18 genes, including three odorant binding proteins. It has been hypothesized that the evolution of host specialization is facilitated by genetic linkage between alleles contributing to host preference and alleles contributing to host usage, such as tolerance to secondary compounds. We tested this hypothesis by measuring the effect of this tolerance locus on host preference behavior. Our data were inconsistent with the linkage hypothesis, as flies bearing this tolerance region showed no increase in preference for media containing M. citrifolia toxins, which D. sechellia prefers. Thus, in contrast to some models for host preference, preference and tolerance are not tightly linked at this locus nor is increased tolerance per se sufficient to change preference. Our data are consistent with the previously proposed model that the evolution of D. sechellia as a M. citrifolia specialist occurred through a stepwise loss of aversion and gain of tolerance to M. citrifolia’s toxins. PMID:24037270

Effects of childhood experience with nature on tolerance of urban residents toward hornets and wild boars in Japan.

PubMed

Hosaka, Tetsuro; Sugimoto, Koun; Numata, Shinya

2017-01-01

Urban biodiversity conservation often aims to promote the quality of life for urban residents by providing ecosystem services as well as habitats for diverse wildlife. However, biodiversity inevitably brings some disadvantages, including problems and nuisances caused by wildlife. Although some studies have reported that enhancement of nature interaction among urban children promotes their affective attitude toward of favorable animals, its effect on tolerance toward problem-causing wildlife is unknown. In this study, we assessed the tolerance of 1,030 urban residents in Japan toward hornets and wild boar, and analyzed the effects of childhood experience with nature on tolerance using a structural equation model. The model used sociodemographic factors and childhood nature experience as explanatory variables, affective attitude toward these animals as a mediator, and tolerance as a response variable. The public tolerance toward hornets and boars was low; over 60% of the respondents would request the removal of hornets and wild boar from nearby green spaces by government services, even when the animals had not caused any damage. Tolerance was lower in females and elderly respondents. Childhood experience with nature had a greater influence on tolerance than did sociodemographic factors in the scenario where animals have not caused any problems; however, its effect was only indirect via promoting positive affective attitude toward wildlife when the animals have caused problems. Our results suggest that increasing people's direct experience with nature is important to raise public tolerance, but its effect is limited to cases where wildlife does not cause any problems. To obtain wider support for conservation in urban areas, conservationists, working together with municipal officials, educators and the media, should provide relevant information on the ecological functions performed by problem-causing wildlife and strategies for avoiding the problems that wildlife can cause.

The Application of Continuous Wavelet Transform Based Foreground Subtraction Method in 21 cm Sky Surveys

NASA Astrophysics Data System (ADS)

Gu, Junhua; Xu, Haiguang; Wang, Jingying; An, Tao; Chen, Wen

2013-08-01

We propose a continuous wavelet transform based non-parametric foreground subtraction method for the detection of redshifted 21 cm signal from the epoch of reionization. This method works based on the assumption that the foreground spectra are smooth in frequency domain, while the 21 cm signal spectrum is full of saw-tooth-like structures, thus their characteristic scales are significantly different. We can distinguish them in the wavelet coefficient space easily and perform the foreground subtraction. Compared with the traditional spectral fitting based method, our method is more tolerant to complex foregrounds. Furthermore, we also find that when the instrument has uncorrected response error, our method can also work significantly better than the spectral fitting based method. Our method can obtain similar results with the Wp smoothing method, which is also a non-parametric method, but our method consumes much less computing time.

Eigenstructure Assignment for Fault Tolerant Flight Control Design

NASA Technical Reports Server (NTRS)

Sobel, Kenneth; Joshi, Suresh (Technical Monitor)

2002-01-01

In recent years, fault tolerant flight control systems have gained an increased interest for high performance military aircraft as well as civil aircraft. Fault tolerant control systems can be described as either active or passive. An active fault tolerant control system has to either reconfigure or adapt the controller in response to a failure. One approach is to reconfigure the controller based upon detection and identification of the failure. Another approach is to use direct adaptive control to adjust the controller without explicitly identifying the failure. In contrast, a passive fault tolerant control system uses a fixed controller which achieves acceptable performance for a presumed set of failures. We have obtained a passive fault tolerant flight control law for the F/A-18 aircraft which achieves acceptable handling qualities for a class of control surface failures. The class of failures includes the symmetric failure of any one control surface being stuck at its trim value. A comparison was made of an eigenstructure assignment gain designed for the unfailed aircraft with a fault tolerant multiobjective optimization gain. We have shown that time responses for the unfailed aircraft using the eigenstructure assignment gain and the fault tolerant gain are identical. Furthermore, the fault tolerant gain achieves MIL-F-8785C specifications for all failure conditions.

Comparative study of SOS2 and a novel PMP3-1 gene expression in two sunflower (Helianthus annuus L.) lines differing in salt tolerance.

PubMed

Saadia, Mubshara; Jamil, Amer; Ashraf, Muhammad; Akram, Nudrat Aisha

2013-06-01

Gene expression pattern of two important regulatory proteins, salt overly sensitive 2 (SOS2) and plasma membrane protein 3-1 (PMP3-1), involved in ion homeostasis, was analyzed in two salinity-contrasting sunflower (Helianthus annuus L.) lines, Hysun-38 (salt tolerant) and S-278 (moderately salt tolerant). The pattern was studied at selected time intervals (24 h) under 150 mM NaCl treatment. Using reverse transcription PCR, SOS2 gene fragment was obtained from young leaf and root tissues of opposing lines while that for PMP3-1 was obtained only from young root tissues. Both tolerant and moderately tolerant lines showed a gradual increase in SOS2 expression in sunflower root tissues. Leaf tissues showed the gradually increasing pattern of SOS2 expression in tolerant plants as compared to that for moderately tolerant ones that showed a relatively lower level of expression for this gene. We found the highest level of PMP 3-1 expression in the roots of tolerant sunflower line at 6 and 12 h postsalinity treatment. The moderately tolerant line showed higher expression of PMP3-1 at 12 and 24 h after salt treatment. Overall, the expression of genes for both the regulator proteins varied significantly in the two sunflower lines differing in salinity tolerance.

Relationships of self-identified cold tolerance and cold-induced vasodilatation in the finger

NASA Astrophysics Data System (ADS)

Park, Joonhee; Lee, Joo-Young

2016-04-01

This study was conducted to investigate relationships of self-identified cold tolerance and cold-induced vasodilatation (CIVD) in the finger. Nine males and 34 females participated in the following 2 tests: a CIVD test and a self-reported survey. The CIVD test was conducted 30-min cold-water immersion (3.8 ± 0.3 °C) of the middle finger at an air temperature of 27.9 ± 0.1 °C. The self-reported questionnaire consisted of 28 questions about whole and local body cold and heat tolerances. By a cluster analysis on the survey results, the participants were divided into two groups: high self-identified cold tolerance (HSCT, n = 25) and low self-identified cold tolerance (LSCT, n = 18). LSCT had lower self-identified cold tolerance ( P < 0.001), preferred hot thermal stimulation ( P = 0.006), and wore heavier clothing during daily life ( P < 0.001) than HSCT. LSCT had significantly lower maximal finger temperatures ( T max) ( P = 0.040), smaller amplitude ( P = 0.029), and delayed onset time of CIVD ( P = 0.080) when compared to HSCT. Some questions examining the self-identified cold or heat tolerance had relationships with cold tolerance index, T max, and amplitude ( P < 0.1). These results indicate that self-identified cold tolerance classified through a standardized survey could be a good index to predict physiological cold tolerance.

Relationships of self-identified cold tolerance and cold-induced vasodilatation in the finger.

PubMed

Park, Joonhee; Lee, Joo-Young

2016-04-01

This study was conducted to investigate relationships of self-identified cold tolerance and cold-induced vasodilatation (CIVD) in the finger. Nine males and 34 females participated in the following 2 tests: a CIVD test and a self-reported survey. The CIVD test was conducted 30-min cold-water immersion (3.8 ± 0.3 °C) of the middle finger at an air temperature of 27.9 ± 0.1 °C. The self-reported questionnaire consisted of 28 questions about whole and local body cold and heat tolerances. By a cluster analysis on the survey results, the participants were divided into two groups: high self-identified cold tolerance (HSCT, n = 25) and low self-identified cold tolerance (LSCT, n = 18). LSCT had lower self-identified cold tolerance (P < 0.001), preferred hot thermal stimulation (P = 0.006), and wore heavier clothing during daily life (P < 0.001) than HSCT. LSCT had significantly lower maximal finger temperatures (T max) (P = 0.040), smaller amplitude (P = 0.029), and delayed onset time of CIVD (P = 0.080) when compared to HSCT. Some questions examining the self-identified cold or heat tolerance had relationships with cold tolerance index, T max, and amplitude (P < 0.1). These results indicate that self-identified cold tolerance classified through a standardized survey could be a good index to predict physiological cold tolerance.

Variability in Heat Strain in Fully Encapsulated Impermeable Suits in Different Climates and at Different Work Loads.

PubMed

DenHartog, Emiel A; Rubenstein, Candace D; Deaton, A Shawn; Bogerd, Cornelis Peter

2017-03-01

A major concern for responders to hazardous materials (HazMat) incidents is the heat strain that is caused by fully encapsulated impermeable (NFPA 1991) suits. In a research project, funded by the US Department of Defense, the thermal strain experienced when wearing these suits was studied. Forty human subjects between the ages of 25 and 50 participated in a protocol approved by the local ethical committee. Six different fully encapsulated impermeable HazMat suits were evaluated in three climates: moderate (24°C, 50% RH, 20°C WBGT), warm-wet (32°C, 60% RH, 30°C WBGT), and hot-dry (45°C, 20% RH, 37°C WBGT, 200 W m-2 radiant load) and at three walking speeds: 2.5, 4, and 5.5 km h-1. The medium speed, 4 km h-1, was tested in all three climates and the other two walking speeds were only tested in the moderate climate. Prior to the test a submaximal exercise test in normal clothing was performed to determine a relationship between heart rate and oxygen consumption (pretest). In total, 163 exposures were measured. Tolerance time ranged from as low as 20 min in the hot-dry condition to 60 min (the maximum) in the moderate climate, especially common at the lowest walking speed. Between the six difference suits limited differences were found, a two-layered aluminized suit exhibited significant shorter tolerance times in the moderate climate, but no other major significant differences were found for the other climates or workloads. An important characteristic of the overall dataset is the large variability between the subjects. Although the average responses seem suitable to be predicted, the variability in the warmer strain conditions ranged from 20 min up to 60 min. The work load in these encapsulated impermeable suits was also significantly higher than working in normal clothing and higher than predicted by the Pandolf equation. Heart rate showed a very strong correlation to body core temperature and was in many cases the limiting factor. Setting the heart rate maximum at 80% of predicted individual maximum (age based) would have prevented 95% of the cases with excessive heat strain. Monitoring of heart rate under operational conditions would further allow individually optimize working times and help in preventing exertional heat stroke. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Salt tolerance evolves more frequently in C4 grass lineages.

PubMed

Bromham, L; Bennett, T H

2014-03-01

Salt tolerance has evolved many times in the grass family, and yet few cereal crops are salt tolerant. Why has it been so difficult to develop crops tolerant of saline soils when salt tolerance has evolved so frequently in nature? One possible explanation is that some grass lineages have traits that predispose them to developing salt tolerance and that without these background traits, salt tolerance is harder to achieve. One candidate background trait is photosynthetic pathway, which has also been remarkably labile in grasses. At least 22 independent origins of the C4 photosynthetic pathway have been suggested to occur within the grass family. It is possible that the evolution of C4 photosynthesis aids exploitation of saline environments, because it reduces transpiration, increases water-use efficiency and limits the uptake of toxic ions. But the observed link between the evolution of C4 photosynthesis and salt tolerance could simply be due to biases in phylogenetic distribution of halophytes or C4 species. Here, we use a phylogenetic analysis to investigate the association between photosynthetic pathway and salt tolerance in the grass family Poaceae. We find that salt tolerance is significantly more likely to occur in lineages with C4 photosynthesis than in C3 lineages. We discuss the possible links between C4 photosynthesis and salt tolerance and consider the limitations of inferring the direction of causality of this relationship. © 2014 The Authors. Journal of Evolutionary Biology © 2014 European Society For Evolutionary Biology.

Laminins affect T cell trafficking and allograft fate

PubMed Central

Warren, Kristi J.; Iwami, Daiki; Harris, Donald G.; Bromberg, Jonathan S.; Burrell, Bryna E.

2014-01-01

Lymph nodes (LNs) are integral sites for the generation of immune tolerance, migration of CD4+ T cells, and induction of Tregs. Despite the importance of LNs in regulation of inflammatory responses, the LN-specific factors that regulate T cell migration and the precise LN structural domains in which differentiation occurs remain undefined. Using intravital and fluorescent microscopy, we found that alloreactive T cells traffic distinctly into the tolerant LN and colocalize in exclusive regions with alloantigen-presenting cells, a process required for Treg induction. Extracellular matrix proteins, including those of the laminin family, formed regions within the LN that were permissive for colocalization of alloantigen-presenting cells, alloreactive T cells, and Tregs. We identified unique expression patterns of laminin proteins in high endothelial venule basement membranes and the cortical ridge that correlated with alloantigen-specific immunity or immune tolerance. The ratio of laminin α4 to laminin α5 was greater in domains within tolerant LNs, compared with immune LNs, and blocking laminin α4 function or inducing laminin α5 overexpression disrupted T cell and DC localization and transmigration through tolerant LNs. Furthermore, reducing α4 laminin circumvented tolerance induction and induced cardiac allograft inflammation and rejection in murine models. This work identifies laminins as potential targets for immune modulation. PMID:24691446

Supervisor tolerance-responsiveness to substance abuse and workplace prevention training: use of a cognitive mapping tool.

PubMed

Bennett, Joel B; Lehman, Wayne E K

2002-02-01

Supervisor tolerance-responsiveness, referring to the attitudes and behaviors associated with either ignoring or taking proactive steps with troubled employees, was investigated in two studies. The studies were conducted to help examine, understand and improve supervisor responsiveness to employee substance abuse. Study 1 examined supervisor response to and tolerance of coworker substance use and ways of interfacing with the Employee Assistance Program (EAP) in two workplaces (n = 244 and 107). These surveys suggested that engaging supervisors in a dialogue about tolerance might improve their willingness to use the EAP. Study 2 was a randomized control field experiment that assessed a team-oriented training. This training adopted a cognitive mapping technique to help improve supervisor responsiveness. Supervisors receiving this training (n = 29) were more likely to improve on several dimensions of responsiveness (e.g. likely to contact the EAP) than were supervisors who received a more didactic, informational training (n = 23) or a no-training control group (n = 17). Trained supervisors also showed increases in their own help-seeking behavior. Procedures and maps from the mapping activity (two-stage conversational mapping) are described. Overall, results indicate that while supervisor tolerance of coworker substance use inhibits EAP utilization, it may be possible to address this tolerance using team-oriented prevention training in the work-site.

Impact of pseudo-continuous fermentation on the ethanol tolerance of Scheffersomyces stipitis.

PubMed

Liang, Meng; Kim, Min Hea; He, Qinghua Peter; Wang, Jin

2013-09-01

In this work we conducted the pseudo-continuous fermentation, i.e., continuous fermentation with cell retention, using Scheffersomyces stipitis, and studied its effect on ethanol tolerance of the strain. During the fermentation experiments, S. stipitis was adapted to a mild concentration of ethanol (20-26 g/L) for two weeks. Two substrates (glucose and xylose) were used in different fermentation experiments. After fermentation, various experiments were performed to evaluate the ethanol tolerance of adapted cells and unadapted cells. Compared to the unadapted cells, the viability of adapted cells increased by 8 folds with glucose as the carbon source and 6 folds with xylose as the carbon source following exposure to 60 g/L ethanol for 2 h. Improved ethanol tolerance of the adapted cells was also revealed in the effects of ethanol on plasma membrane permeability, extracellular alkalization and acidification. The mathematical modeling of cell leakage, extracellular alkalization and acidification revealed that cells cultured on glucose show better ethanol tolerance than cells cultured on xylose but the differences become smaller for adapted cells. The results show that pseudo-continuous fermentation can effectively improve cell's ethanol tolerance due to the environmental pressure during the fermentation process. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Proline accumulation and its implication in cold tolerance of regenerable maize callus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duncan, D.R.; Widholm, J.M.

1987-03-01

Embryogenic callus of maize (Zea mays L.) inbreds B37wx, H99, H99/sup 3/H95, Mo17, and Pa91 accumulated proline to levels 2.1 to 2.5 times that of control callus when subjected to mannitol-induced water stress, cool temperatures (19/sup 0/C) and abscisic acid (ABA). A combination of 0.53 molar mannitol plus 0.1 millimolar ABA induced a proline accumulation to about 4.5 times that of control callus, equivalent to approximately 0.18 millimoles proline per gram fresh weight of callus. Proline accumulation was directly related to the level of mannitol in the medium. Levels of ABA greater than 1.0 micromolar were required in the mediummore » to induce proline accumulation comparable to that induced by mannitol. Mannitol and ABA levels that induced maximum accumulation of proline also inhibited callus growth and increased tolerance to cold. Proline (12 millimolar) added to culture media also increased the tolerance of callus to 4/sup 0/C. The increased cold tolerance induced by the combination of mannitol and ABA has permitted the storage of the maize inbreds A632, A634Ht, B37wx, C103DTrf, Fr27rhm, H99, Pa91, Va35, and W117Ht at 4/sup 0/C for 90 days which is more than double the typical survival time of callus. These studies show that proline accumulation increase the cold tolerance of regenerable maize callus.« less

Comparative transcriptome analysis of differentially expressed genes in foxtail millet (Setaria italica L.) during dehydration stress.

PubMed

Lata, Charu; Sahu, Pranav Pankaj; Prasad, Manoj

2010-03-19

Dehydration stress is one of the most important abiotic stresses that adversely influence crop growth and productivity. With the aim to understand the molecular mechanisms underlying dehydration stress tolerance in foxtail millet (Setaria italica L.), a drought tolerant crop, we examined its transcriptome changes at two time points (early and late) of dehydration stress. Two suppression subtractive hybridization (SSH) forward libraries were constructed from 21-day old seedlings of tolerant cv. Prasad at 0.5 and 6h PEG-induced dehydration stress. A total of 327 unique ESTs were identified from both libraries and were classified into 11 different categories according to their putative functions. The plant response against dehydration stress was complex, representing major transcripts involved in metabolism, stress, signaling, transcription regulation, translation and proteolysis. By Reverse Northern (RN) technique we identified the differential expression pattern of 327 transcripts, 86 (about 26%) of which showed > or = 1.7-fold induction. Further the obtained results were validated by quantitative real-time PCR (qRT-PCR) to have a comparative expression profiling of randomly chosen 9 up-regulated transcripts (> or =2.5 fold induction) between cv. Prasad (tolerant) and cv. Lepakshi (sensitive) upon dehydration stress. These transcripts showed a differential expression pattern in both cultivars at different time points of stress treatment as analyzed by qRT-PCR. The possible relationship of the identified transcripts with dehydration tolerance mechanism is discussed. Copyright 2010 Elsevier Inc. All rights reserved.

Protease Activities Triggered by Ralstonia solanacearum Infection in Susceptible and Tolerant Tomato Lines.

PubMed

Planas-Marquès, Marc; Bernardo-Faura, Martí; Paulus, Judith; Kaschani, Farnusch; Kaiser, Markus; Valls, Marc; van der Hoorn, Renier A L; Coll, Núria S

2018-06-01

Activity-based protein profiling (ABPP) is a powerful proteomic technique to display protein activities in a proteome. It is based on the use of small molecular probes that react with the active site of proteins in an activity-dependent manner. We used ABPP to dissect the protein activity changes that occur in the intercellular spaces of tolerant (Hawaii 7996) and susceptible (Marmande) tomato plants in response to R. solanacearum , the causing agent of bacterial wilt, one of the most destructive bacterial diseases in plants. The intercellular space -or apoplast- is the first battlefield where the plant faces R. solanacearum Here, we explore the possibility that the limited R. solanacearum colonization reported in the apoplast of tolerant tomato is partly determined by its active proteome. Our work reveals specific activation of papain-like cysteine proteases (PLCPs) and serine hydrolases (SHs) in the leaf apoplast of the tolerant tomato Hawaii 7996 on R. solanacearum infection. The P69 family members P69C and P69F, and an unannotated lipase (Solyc02g077110.2.1), were found to be post-translationally activated. In addition, protein network analysis showed that deeper changes in network topology take place in the susceptible tomato variety, suggesting that the tolerant cultivar might be more prepared to face R. solanacearum in its basal state. Altogether this work identifies significant changes in the activity of 4 PLCPs and 27 SHs in the tomato leaf apoplast in response to R. solanacearum , most of which are yet to be characterized. Our findings denote the importance of novel proteomic approaches such as ABPP to provide new insights on old and elusive questions regarding the molecular basis of resistance to R. solanacearum . © 2018 by The American Society for Biochemistry and Molecular Biology, Inc.

Mini-Ckpts: Surviving OS Failures in Persistent Memory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiala, David; Mueller, Frank; Ferreira, Kurt Brian

Concern is growing in the high-performance computing (HPC) community on the reliability of future extreme-scale systems. Current efforts have focused on application fault-tolerance rather than the operating system (OS), despite the fact that recent studies have suggested that failures in OS memory are more likely. The OS is critical to a system's correct and efficient operation of the node and processes it governs -- and in HPC also for any other nodes a parallelized application runs on and communicates with: Any single node failure generally forces all processes of this application to terminate due to tight communication in HPC. Therefore,more » the OS itself must be capable of tolerating failures. In this work, we introduce mini-ckpts, a framework which enables application survival despite the occurrence of a fatal OS failure or crash. Mini-ckpts achieves this tolerance by ensuring that the critical data describing a process is preserved in persistent memory prior to the failure. Following the failure, the OS is rejuvenated via a warm reboot and the application continues execution effectively making the failure and restart transparent. The mini-ckpts rejuvenation and recovery process is measured to take between three to six seconds and has a failure-free overhead of between 3-5% for a number of key HPC workloads. In contrast to current fault-tolerance methods, this work ensures that the operating and runtime system can continue in the presence of faults. This is a much finer-grained and dynamic method of fault-tolerance than the current, coarse-grained, application-centric methods. Handling faults at this level has the potential to greatly reduce overheads and enables mitigation of additional fault scenarios.« less

Antitumor efficacy and tolerability of systemically administered gallium acetylacetonate-loaded gelucire-stabilized nanoparticles.

PubMed

Wehrung, Daniel; Bi, Lipeng; Geldenhuys, Werner J; Oyewumi, Moses O

2013-06-01

The widespread clinical success with most gallium compounds in cancer therapy is markedly hampered by lack of tumor specific accumulation, poor tumor permeability and undesirable toxicity to healthy tissues. The aim of this work was to investigate for the first time antitumor mechanism of a new gallium compound (gallium acetylacetonate; GaAcAc) while assessing effectiveness of gelucire-stabilized nanoparticles (NPs) for potential application in gallium-based lung cancer therapy. NPs loaded with GaAcAc (Ga-NPs) were prepared using mixtures of cetyl alcohol with Gelucire 44/14 (Ga-NP-1) or Gelucire 53/13 (Ga-NP-2) as matrix materials. Of special note from this work is the direct evidence of involvement of microtubule disruption in antitumor effects of GaAcAc on human lung adenocarcinoma (A549). In-vivo tolerability studies were based on plasma ALT, creatinine levels and histopathological examination of tissues. The superior in-vivo antitumor efficacy of Ga-NPs over GaAcAc was depicted in marked reduction of tumor weight and tumor volume as well as histological assessment of excised tumors. Compared to free GaAcAc, Ga-NPs showed a 3-fold increase in tumor-to-blood gallium concentrations with minimized overall exposure to healthy tissues. Overall, enhancement of antitumor effects of GaAcAc by gelucire-stabilized NPs coupled with reduced exposure of healthy tissues to gallium would likely ensure desired therapeutic outcomes and safety of gallium-based cancer treatment.

The effect of Holocene temperature fluctuations on the evolution and ecology of Neotoma (woodrats) in Idaho and northwestern Utah

USGS Publications Warehouse

Smith, F.A.; Betancourt, J.L.

2003-01-01

Animals respond to climatic change by adapting or by altering distributional patterns. How an animal responds is influenced by where it is positioned within its geographic range; the probability of extirpation is increased near range boundaries. Here, we examine the impact of Holocene climatic fluctuations on a small mammalian herbivore, the bushy-tailed woodrat (Neotoma cinerea), at five locations within south central Idaho and northwestern Utah. Previous work demonstrated that woodrats adapt to temperature shifts by altering body size. We focus here on the relationship between body mass, temperature, and location within the geographic range. Body mass is estimated by measuring fossil fecal pellets, a technique validated in earlier work. Overall, we find the predicted phenotypic response to climate change: Animals were larger during cold periods, and smaller during warmer episodes. However, we also identify several time periods when changes in environmental temperature exceeded the adaptive flexibility of N. cinerea. A smaller-bodied species, the desert woodrat (N. lepida) apparently invaded lower elevation sites during the mid-Holocene, despite being behaviorally and physically subordinate to N. cinerea. Analysis of contemporary patterns of body size and thermal tolerances for both woodrat species suggests this was because of the greater heat tolerance of N. lepida. The robust spatial relationship between contemporary body size and ambient temperature is used as a proxy to reconstruct local climate during the Holocene. ?? 2003 Elsevier Science (USA). All rights reserved.

Tolerance in Internet gaming disorder: A need for increasing gaming time or something else?

PubMed

King, Daniel L; Herd, Madeleine C E; Delfabbro, Paul H

2017-12-01

Background and aims The criterion of tolerance in DSM-5 Internet gaming disorder (IGD) refers to a need for increasing time spent gaming. However, this focus on "need for gaming time" may overlook some of the broader motivations, outcomes, or effects of gaming that underlie excessive play. This study aimed to explore regular and problematic gamers' experiences and perceptions of tolerance in IGD. Methods An online survey of 630 adult gamers yielded 1,417 text responses to open-ended questions. A thematic analysis of 23,373 words was conducted to extract dominant themes. Results Participants reported that they increasingly desired game items, status, or story progress as they became more involved or invested in games. As players develop higher standards of play in games, an increasing number of potential reward outcomes may have diminishing mood-modifying effects. None of the participants, including those with self-reported IGD, explicitly referred to a need for increasing time spent gaming. Discussion and conclusions These results suggest that players may be motivated by preferences for specific goals or reinforcers in games rather than wanting an amount of time spent gaming. Thus, problematic gaming may involve a need for completion of increasingly intricate, time-consuming, or difficult goals to achieve satisfaction and/or reduce fears of missing out. Further research is needed to determine whether these cognitive and motivational factors related to gaming stimuli should extend or replace the concept of tolerance in IGD or be considered as separate but related processes in disordered gaming.

An increased rectal maximum tolerable volume and long anal canal are associated with poor short-term response to biofeedback therapy for patients with anismus with decreased bowel frequency and normal colonic transit time.

PubMed

Rhee, P L; Choi, M S; Kim, Y H; Son, H J; Kim, J J; Koh, K C; Paik, S W; Rhee, J C; Choi, K W

2000-10-01

Biofeedback is an effective therapy for a majority of patients with anismus. However, a significant proportion of patients still failed to respond to biofeedback, and little has been known about the factors that predict response to biofeedback. We evaluated the factors associated with poor response to biofeedback. Biofeedback therapy was offered to 45 patients with anismus with decreased bowel frequency (less than three times per week) and normal colonic transit time. Any differences in demographics, symptoms, and parameters of anorectal physiologic tests were sought between responders (in whom bowel frequency increased up to three times or more per week after biofeedback) and nonresponders (in whom bowel frequency remained less than three times per week). Thirty-one patients (68.9 percent) responded to biofeedback and 14 patients (31.1 percent) did not. Anal canal length was longer in nonresponders than in responders (4.53 +/- 0.5 vs. 4.08 +/- 0.56 cm; P = 0.02), and rectal maximum tolerable volume was larger in nonresponders than in responders. (361 +/- 87 vs. 302 +/- 69 ml; P = 0.02). Anal canal length and rectal maximum tolerable volume showed significant differences between responders and nonresponders on multivariate analysis (P = 0.027 and P = 0.034, respectively). This study showed that a long anal canal and increased rectal maximum tolerable volume are associated with poor short-term response to biofeedback for patients with anismus with decreased bowel frequency and normal colonic transit time.

Immune tolerance induction in patients with haemophilia a and inhibitors: effectiveness and cost analysis in an European Cohort (The ITER Study).

PubMed

Rocino, A; Cortesi, P A; Scalone, L; Mantovani, L G; Crea, R; Gringeri, A

2016-01-01

Although immune tolerance induction (ITI) is considered the first choice treatment to eradicate inhibitors in haemophilia A patients, little is known about outcomes determinants and cost magnitude. A retrospective, multicentre study was conducted to assess the relationship between ITI outcome, clinical and treatment characteristics and cost of ITI treatment in haemophilia A patients. Data from 12 months before inhibitor diagnosis to 12 months after ITI completion were collected. Treatment cost was calculated in the third-party perspective and expressed as mean € per patient-month. Cox regression models were used to identify predictors of better outcome and the time taken to achieve tolerance. Seventy-one patients, aged 0.4-41 years (median: 3.8 years) at ITI start, were enrolled. Undetectable inhibitor was achieved in 84.5% of patients and inhibitor eradication with normal factor VIII (FVIII) pharmacokinetics in 74.2%. Median time to successful tolerance was 10.7 months (range 2.0-90.0 months). Peak inhibitor level on ITI was a significant predictor of ITI success. Breakthrough bleeding event incidence during ITI was associated with time to success. The mean cost of treatment for the time period between inhibitor diagnosis and ITI start was €3188 per patient-month (92.1% for bypassing agents), and €60 078 during ITI (76.8% for FVIII use in ITI). Immune tolerance induction in this patient cohort was successful in 84.5% of patients with a mean cost of €60 000 per patient-month. This high cost is dwarfed by comparison with the prospect of lifelong care of an inhibitor patient, in addition to gains in life expectancy and health-related quality of life. © 2015 John Wiley & Sons Ltd.

A prospective study of psychomotor performance of driving among two kinds of shift work in Iran

PubMed Central

Saadat, Soheil; Karbakhsh, Mojgan; Saremi, Mahnaz; Alimohammadi, Iraj; Ashayeri, Hassan; Fayaz, Mahsa; Rostami, Reza

2018-01-01

Background and aim Driving after a night shift imposes a risk on health care professionals and other road users. The aim of this study was to measure psychomotor performance of driving of night shift nurses compared to day-shift nurses. Methods Forty-seven volunteer female nurses working at Sina hospital in Tehran, Iran, with a call in all departments of hospital, participated in this study (23 night shift and 24 day shift nurses) in 2016. The tests included RT for simple reaction time, ATAVT for perceptual speed, LVT for visual orientation and ZBA for time anticipation. Data collection tools were individual characteristics, 11-item circadian type inventory (CTI), Stanford sleepiness scale (SSS), and Swedish occupational fatigue inventory (SOFI-20) questionnaires. Psychomotor driving performance was assessed using validated computerized traffic psychological battery of Vienna Test System (VTS), before and after the shifts. Data analysis was performed using paired-samples t-test and Linear Regression. Results The mean age of day and night-shift nurses were 31.4±5.6 and 28.7±3.9 years respectively, no significant difference between two groups. Thirty percent of night shift and 16.7% of day shift nurses reported traffic accidents in the past year. The results revealed that, scores based on viewing times in visual orientation test (p=0.005), and median reaction time score in choice reaction time and reactive stress tolerance test (p=0.045), had a significant association with a 12-hour night shift with a 3-hour nap. Conclusions Twelve-hour night shift work impairs choice reaction time and visual orientation in nurses, even though they take a 3- hour nap during the shift. These skills are required for safe driving. PMID:29629067

Formal design specification of a Processor Interface Unit

NASA Technical Reports Server (NTRS)

Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

1992-01-01

This report describes work to formally specify the requirements and design of a processor interface unit (PIU), a single-chip subsystem providing memory-interface bus-interface, and additional support services for a commercial microprocessor within a fault-tolerant computer system. This system, the Fault-Tolerant Embedded Processor (FTEP), is targeted towards applications in avionics and space requiring extremely high levels of mission reliability, extended maintenance-free operation, or both. The need for high-quality design assurance in such applications is an undisputed fact, given the disastrous consequences that even a single design flaw can produce. Thus, the further development and application of formal methods to fault-tolerant systems is of critical importance as these systems see increasing use in modern society.