Approaches to automated protein crystal harvesting

PubMed Central

Deller, Marc C.; Rupp, Bernhard

2014-01-01

The harvesting of protein crystals is almost always a necessary step in the determination of a protein structure using X-ray crystallographic techniques. However, protein crystals are usually fragile and susceptible to damage during the harvesting process. For this reason, protein crystal harvesting is the single step that remains entirely dependent on skilled human intervention. Automation has been implemented in the majority of other stages of the structure-determination pipeline, including cloning, expression, purification, crystallization and data collection. The gap in automation between crystallization and data collection results in a bottleneck in throughput and presents unfortunate opportunities for crystal damage. Several automated protein crystal harvesting systems have been developed, including systems utilizing microcapillaries, microtools, microgrippers, acoustic droplet ejection and optical traps. However, these systems have yet to be commonly deployed in the majority of crystallography laboratories owing to a variety of technical and cost-related issues. Automation of protein crystal harvesting remains essential for harnessing the full benefits of fourth-generation synchrotrons, free-electron lasers and microfocus beamlines. Furthermore, automation of protein crystal harvesting offers several benefits when compared with traditional manual approaches, including the ability to harvest microcrystals, improved flash-cooling procedures and increased throughput. PMID:24637746

Ranking Alaska moose nutrition: Signals to begin liberal antlerless harvests

USGS Publications Warehouse

Boertje, Rodney D.; Kellie, Kalin A.; Seaton, C. Tom; Keech, Mark A.; Young, Donald D.; Dale, Bruce W.; Adams, Layne G.; Aderman, Andrew R.

2007-01-01

We focused on describing low nutritional status in an increasing moose (Alces alces gigas) population with reduced predation in Game Management Unit (GMU) 20A near Fairbanks, Alaska, USA. A skeptical public disallowed liberal antlerless harvests of this moose population until we provided convincing data on low nutritional status. We ranked nutritional status in 15 Alaska moose populations (in boreal forests and coastal tundra) based on multiyear twinning rates. Data on age-of-first-reproduction and parturition rates provided a ranking consistent with twinning rates in the 6 areas where comparative data were available. Also, short-yearling mass provided a ranking consistent with twinning rates in 5 of the 6 areas where data were available. Data from 5 areas implied an inverse relationship between twinning rate and browse removal rate. Only in GMU 20A did nutritional indices reach low levels where justification for halting population growth was apparent, which supports prior findings that nutrition is a minor factor limiting most Alaska moose populations compared to predation. With predator reductions, the GMU 20A moose population increased from 1976 until liberal antlerless harvests in 2004. During 1997–2005, GMU 20A moose exhibited the lowest nutritional status reported to date for wild, noninsular, North American populations, including 1) delayed reproduction until moose reached 36 months of age and the lowest parturition rate among 36-month-old moose (29%, n = 147); 2) the lowest average multiyear twinning rates from late-May aerial surveys (x̄ = 7%, SE = 0.9%, n = 9 yr, range = 3–10%) and delayed twinning until moose reached 60 months of age; 3) the lowest average mass of female short-yearlings in Alaska (x̄ = 155 ± 1.6 [SE] kg in the Tanana Flats subpopulation, up to 58 kg below average masses found elsewhere); and 4) high removal (42%) of current annual browse biomass compared to 9–26% elsewhere in boreal forests. When average multiyear twinning

Techniques for increasing machine-harvest efficiency in highbush blueberry

USDA-ARS?s Scientific Manuscript database

Southern highbush blueberries (SHB) (Vaccinium darrowi x V. corymbosum) are mostly hand harvested for the fresh market. Hand harvesting of blueberry is labor intensive (approximately 500 hours/acre) and costly. With the uncertainty of labor availability in the near future, efforts are underway to ...

X-15 Model in 7x10 FT Tunnel

NASA Image and Video Library

1959-09-17

X-15 launch techniques were investigated using on-twentieth scale models mounted in the 7x10 FT Tunnel. -- Photograph published in Winds of Change, 75th Anniversary NASA publication (page 67), by James Schultz. -- Photograph also published in Sixty Years of Aeronautical Research 1917-1977 - a NASA publication (page 49), by David A. Anderton.

Synthesis of perylene-porphyrin building blocks and polymers thereof for the production of light-harvesting arrays

DOEpatents

Loewe, Robert S.; Tomizaki, Kin-ya; Lindsey, Jonathan S.

2005-07-12

The present invention provides methods, compounds, and compositions for the synthesis of light harvesting arrays, such arrays comprising: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to said first electrode, each of said light harvesting rods comprising a polymer of Formula I: wherein m is at least 1; X.sup.1 is a charge separation group, and X.sup.2 through X.sup.m+1 are chromophores. At least one of X.sup.2 through X.sup.m+1 has at least one perylene group coupled thereto.

1/10th Scale Model X-15

NASA Image and Video Library

1958-07-08

A 1/10th Scale Model of the X-15 research plane is prepared in Langley's 7 x 10 Foot Wind Tunnel for studies relating to spin characteristics. -- Photograph published in Winds of Change, 75th Anniversary NASA publication (page 66), by James Schultz.

Characterization of Primary Carrier Transport Properties of the Light-Harvesting Chalcopyrite Semiconductors CuIn(S 1–xSe x) 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frick, Jessica J.; Kushwaha, Satya K.; Cava, Robert J.

We report the carrier transport properties of CuIn(S 1-xSe x) 2 (0 ≤ x ≤ 1), a promising chalcopyrite semiconductor series for solar water splitting. A low concentration Mg dopant is used to decrease the carrier resistivity through facilitating bulk p-type transport at ambient temperature. Temperature-dependent resistivity measurements reveal a four-order magnitude decrease in bulk electrical resistivity (from 10 3 to 10 –1 Ohm cm) for 1% Mg-doped CuIn(S 1–xSe x) 2 as x increases from 0 to 1. Hall effect measurements at room temperature reveal p-type majority carrier concentrations that vary from 10 15 to 10 18 cm –3more » and mobilities of approximately 1–10 cm 2 V –1 s –1. These results provide insights into the fundamental carrier transport properties of CuIn(S 1–xSe x) 2 and will be of value in optimizing these materials further for photoelectrochemistry applications.« less

Characterization of Primary Carrier Transport Properties of the Light-Harvesting Chalcopyrite Semiconductors CuIn(S 1–xSe x) 2

DOE PAGES

Frick, Jessica J.; Kushwaha, Satya K.; Cava, Robert J.; ...

2017-07-27

We report the carrier transport properties of CuIn(S 1-xSe x) 2 (0 ≤ x ≤ 1), a promising chalcopyrite semiconductor series for solar water splitting. A low concentration Mg dopant is used to decrease the carrier resistivity through facilitating bulk p-type transport at ambient temperature. Temperature-dependent resistivity measurements reveal a four-order magnitude decrease in bulk electrical resistivity (from 10 3 to 10 –1 Ohm cm) for 1% Mg-doped CuIn(S 1–xSe x) 2 as x increases from 0 to 1. Hall effect measurements at room temperature reveal p-type majority carrier concentrations that vary from 10 15 to 10 18 cm –3more » and mobilities of approximately 1–10 cm 2 V –1 s –1. These results provide insights into the fundamental carrier transport properties of CuIn(S 1–xSe x) 2 and will be of value in optimizing these materials further for photoelectrochemistry applications.« less

Design and experimental evaluation of flextensional-cantilever based piezoelectric transducers for flow energy harvesting

NASA Astrophysics Data System (ADS)

Lee, Hyeong Jae; Sherrit, Stewart; Tosi, Luis Phillipe; Colonius, Tim

2016-04-01

Cantilever type piezoelectric harvesters, such as bimorphs, are typically used for vibration induced energy harvesting. However, a major drawback of a piezoelectric bimorph is its brittle nature in harsh environments, precipitating short life-times as well as output power degradation. The emphasis in this work is to design robust, highly efficient piezoelectric harvesters that are capable of generating electrical power in the milliwatt range. Various harvesters were modeled, designed and prototyped, and the flextensional actuator based harvester, where the metal cantilever is mounted and coupled between two flextensional actuators, was found to be a viable alternative to the cantilever type piezoelectric harvesters. Preliminary tests show that these devices equipped with 5x5x36 mm two piezoelectric PZT stacks can produce greater than 50 mW of power under air flow induced vibrations.

50 CFR 20.20 - Migratory Bird Harvest Information Program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Migratory Bird Harvest Information Program... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Taking § 20.20 Migratory Bird Harvest... information will be used to provide a sampling frame for the national Migratory Bird Harvest Survey. Response...

50 CFR 20.20 - Migratory Bird Harvest Information Program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 8 2011-10-01 2011-10-01 false Migratory Bird Harvest Information Program... IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Taking § 20.20 Migratory Bird Harvest... information will be used to provide a sampling frame for the national Migratory Bird Harvest Survey. Response...

Synthesis of layered perovskite oxides, ACa[sub 2-x]La[sub x]Nb[sub 3-x]Ti[sub x]O[sub 10] (A = K, Rb, Cs), and characterization of new solid acids, HCa[sub 2-x]La[sub x]Nb[sub 3-x]Ti[sub x]O[sub 10] (O < x [le] 2), exhibiting variable Bronsted acidity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gopalakrishnan, J.; Uma, S.; Bhat, V.

1993-01-01

Layered perovskite oxides of the formula ACa[sub 2-x]La[sub x]Nb[sub 3-x]Ti[sub x]O[sub 10] (A = K, Rb, Cs and 0 , x [le] 2) have been prepared. The members adopt the structures of the parent ACa[sub 2]Nb[sub 3]O[sub 10]. Interlayer alkali cations in the niobium-titanium oxide series can be ion-exchanged with Li[sup +], Na[sup +], NG[sub 4][sup +], of H[sup +] to give new derivatives. Intercalation of the protonated derivatives with organic bases reveals that the Bronsted acidity of the solid solution series, HCa[sub 2-x]La[sub x]Nb[sub 3-x]Ti[sub x]O[sub 10], depends on the titanium content. While the x = 1 member (HCaLaNb[submore » 2]TiO[sub 10]) is nearly as acidic as the parent HCa[sub 2]Nb[sub 3]O[sub 10], the x = 2 member (HLA[sub 2]NbTi[sub 2]O[sub 10]) is a weak acid hardly intercalating organic bases with pK[sub a] [approximately] 11.3. The variation of acidity is probably due to an ordering of Nb/Ti atoms in the triple octahedral perovskite slabs, [Ca[sub 2-x]La[sub x]Nb[sub 3-x]Ti[sub x]O[sub 10

Comets C/2003 X5-X11 and Y2-Y10 (SOHO)

NASA Astrophysics Data System (ADS)

Battams, K.; Boschat, M.; Zhou, X.-M.; Hoffman, T.; Leprette, X.; Matson, R.; Kracht, R.; Sachs, J.; Marsden, B. G.; Kisala, R.

2004-06-01

Further to IAUC 8356, K. Battams reports measurements for additional Kreutz sungrazing comets found on SOHO website C2 images by M. Boschat (C/2003 X5, X7, Y5, Y8), X.-m. Zhou (C/2003 X6, X9, X11), T. Hoffman (C/2003 X8), X. Leprette (C/2003 X10, Y2), R. Matson (2003 Y3, Y9, Y10), R. Kracht (C/2003 Y4, Y7), and J. Sachs (C/2003 Y6). C/2003 Y6 and Y7 were also visible on C3 images. The reductions by B. G. Marsden (and by R. Kisala for C/2003 Y8, Y9, Y10) and orbital elements by Marsden appear on the MPECs cited below. Comet 2003 UT R.A. (2000) Decl. MPEC C/2003 X5 Dec. 4.896 16 46.9 -24 12 2004-L24 C/2003 X6 6.396 16 52.2 -24 20 2004-L24 C/2003 X7 7.829 16 58.6 -24 27 2004-L24 C/2003 X8 8.246 17 00.9 -24 31 2004-L24 C/2003 X9 8.621 17 02.2 -24 34 2004-L24 C/2003 X10 11.188 17 14.5 -24 41 2004-L25 C/2003 X11 13.588 17 25.7 -24 57 2004-L25 C/2003 Y2 19.621 17 53.6 -25 08 2004-L25 C/2003 Y3 19.979 17 55.0 -25 02 2004-L25 C/2003 Y4 20.729 17 58.8 -25 14 2004-L25 C/2003 Y5 22.771 18 08.5 -25 08 2004-L25 C/2003 Y6 23.571 18 14.3 -27 22 2004-L26 C/2003 Y7 24.638 18 20.0 -27 44 2004-L26 C/2003 Y8 25.288 18 19.6 -25 00 2004-L67 C/2003 Y9 25.479 18 20.7 -24 46 2004-L67 C/2003 Y10 26.064 18 23.5 -24 50 2004-L67

50 CFR 300.132 - Lobster harvest limitations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Lobster harvest limitations. 300.132... FISHERIES REGULATIONS Vessels of the United States Fishing in Colombian Treaty Waters § 300.132 Lobster harvest limitations. (a) Berried lobsters. A berried (egg-bearing) lobster in treaty waters may not be...

50 CFR 300.132 - Lobster harvest limitations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 9 2011-10-01 2011-10-01 false Lobster harvest limitations. 300.132... FISHERIES REGULATIONS Vessels of the United States Fishing in Colombian Treaty Waters § 300.132 Lobster harvest limitations. (a) Berried lobsters. A berried (egg-bearing) lobster in treaty waters may not be...

Microstructure and magnetic microstructure of the Pr 60Al 10Ni 10Cu 20-xFe x ( x=0, 4, 10, 15, 18) alloys observed by magnetic force microscopy

NASA Astrophysics Data System (ADS)

Pang, Z. Y.; Han, S. H.; Wang, Y. T.; Wang, W. H.; Han, B. S.

2005-03-01

The microstructure and magnetic microstructure of the Pr 60Al 10Ni 10Cu 20-xFe x ( x=0, 4, 10, 15, 18) alloys have been achieved simultaneously by employing a magnetic force microscope directly on the as-cast cylinder rod surface for the first time. By varying the content of Fe, the microstructure of the Pr-based alloy changes progressively from a full glassy state to a composite state with nanocrystalline particles embedded in the glassy matrix, and finally into a nanostructured state. The accompanying magnetic property gradually changes from paramagnetic to hard. The experiment directly evidences the existence of exchange coupling between the crystallites and the variety of the grain-size-dependent magnetic properties can be well explained by Löffler et al.'s new random-anisotropy model (Löffler, et al., Phys. Rev. Lett. 85 (9) (2000) 1990).

Using magnetic materials to harvest microalgal biomass: evaluation of harvesting and detachment efficiency.

PubMed

Zhu, L-D; Hiltunen, Erkki; Li, Zhaohua

2017-12-15

Using naked iron oxide (Fe 3 O 4 ) and yttrium iron oxide (Y 3 Fe 5 O 12 ) nanoparticles as flocculants, the harvesting efficiency of Chlorella vulgaris biomass was investigated. The harvesting process includes two steps, which are the separation of microalgae from the culture solution with the magnetic nanoparticles and then the separation of the algae from the magnetic nanoparticles. The optimal dosages and pH values for the magnetic harvesting of microalgal biomass were determined. Results showed that Y 3 Fe 5 O 12 nanoparticles were more efficient in microalgal biomass harvesting than Fe 3 O 4 nanoparticles. In an effort to achieve more than 90% of harvesting efficiency, optimal dosages for Fe 3 O 4 and Y 3 Fe 5 O 12 to harvest microalgal biomass were 10 and 2.5 g/L, while the appropriate pH values were 6.2 and 7.3, respectively. The harvesting efficiency of Fe 3 O 4 and Y 3 Fe 5 O 12 nanoparticles increased as the pH value decreased. The experimental results also showed that under a higher pH value Fe 3 O 4 nanoparticles were much easier to be separated from the flocs than Y 3 Fe 5 O 12 . 62.9% of Fe 3 O 4 nanoparticles could be de-attached from the aggregates, when the floc pH value reached 12.3.

Manual harvesting of high population Leucaena stands

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pecson, R.D.; Van Den Beldt, R.J.

1983-01-01

Five-year-old giant Leucaena leucocephala, planted at spacing 1x0.5 m, were harvested using bolos (Filipino machetes) and chainsaws. For felling alone, chainsaws took 35% less time than bolos. For the total harvest including delimbing and hauling an average 20 m to the edge of the stand, chainsaws took 20% less time than bolos. Assuming chainsaws are economically viable, it may be advisable to fell with chainsaws in advance of bolo teams that buck and haul. 2 references.

Multiple Graft Harvestings from Deep Partial-Thickness Scald Wounds Healed under the Influence of Weak Direct Current

DTIC Science & Technology

1990-01-01

acanthosis (H&E, 10X). FIG. 8. Scald wound of a treated animal 16 days after the second split-thickness skin graft harvesting. A) Gross appearance...that is, simply cutting the skin graft at a prede- Doctor Monafo’s questions about another model: yes, in fact, termined thickness and then

1. 8' x 10' enlargement from 4' x 5' negative ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. 8' x 10' enlargement from 4' x 5' negative Kevin Kriesel-Coons, Photographer, November 13, 1990 EXTERIOR OF HYDRO PLANT, SHOWING CURRENT STATE OF DISREPAIR. VIEW FROM WALKWAY OVER TAILRACE OF CROSSCUT CANAL TO THE LARGER, ORIGINAL CROSSCUT HYDRO PLANT. - Crosscut Steam Plant, Ancillary Hydro Unit, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

50 CFR 665.169 - Gold coral harvest moratorium.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 11 2011-10-01 2011-10-01 false Gold coral harvest moratorium. 665.169... Fisheries § 665.169 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.169 - Gold coral harvest moratorium.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Gold coral harvest moratorium. 665.169... Fisheries § 665.169 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.469 - Gold coral harvest moratorium.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Gold coral harvest moratorium. 665.469... Archipelago Fisheries § 665.469 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.270 - Gold coral harvest moratorium.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Gold coral harvest moratorium. 665.270... Fisheries § 665.270 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.169 - Gold coral harvest moratorium.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 13 2012-10-01 2012-10-01 false Gold coral harvest moratorium. 665.169... Fisheries § 665.169 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.469 - Gold coral harvest moratorium.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 11 2011-10-01 2011-10-01 false Gold coral harvest moratorium. 665.469... Archipelago Fisheries § 665.469 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.270 - Gold coral harvest moratorium.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 13 2012-10-01 2012-10-01 false Gold coral harvest moratorium. 665.270... Fisheries § 665.270 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.469 - Gold coral harvest moratorium.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 13 2012-10-01 2012-10-01 false Gold coral harvest moratorium. 665.469... Archipelago Fisheries § 665.469 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.270 - Gold coral harvest moratorium.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 11 2011-10-01 2011-10-01 false Gold coral harvest moratorium. 665.270... Fisheries § 665.270 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

Light-harvesting photocatalysis for water oxidation using mesoporous organosilica.

PubMed

Takeda, Hiroyuki; Ohashi, Masataka; Goto, Yasutomo; Ohsuna, Tetsu; Tani, Takao; Inagaki, Shinji

2014-07-14

An organic-based photocatalysis system for water oxidation, with visible-light harvesting antennae, was constructed using periodic mesoporous organosilica (PMO). PMO containing acridone groups in the framework (Acd-PMO), a visible-light harvesting antenna, was supported with [Ru(II)(bpy)3(2+)] complex (bpy = 2,2'-bipyridyl) coupled with iridium oxide (IrO(x)) particles in the mesochannels as photosensitizer and catalyst, respectively. Acd-PMO absorbed visible light and funneled the light energy into the Ru complex in the mesochannels through excitation energy transfer. The excited state of Ru complex is oxidatively quenched by a sacrificial oxidant (Na2S2O8) to form Ru(3+) species. The Ru(3+) species extracts an electron from IrO(x) to oxidize water for oxygen production. The reaction quantum yield was 0.34 %, which was improved to 0.68 or 1.2 % by the modifications of PMO. A unique sequence of reactions mimicking natural photosystem II, 1) light-harvesting, 2) charge separation, and 3) oxygen generation, were realized for the first time by using the light-harvesting PMO. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Genetics Home Reference: ethylmalonic encephalopathy

MedlinePlus

... Tiranti V, Zeviani M. Altered sulfide (H(2)S) metabolism in ethylmalonic encephalopathy. Cold Spring Harb Perspect Biol. 2013 Jan 1;5(1):a011437. doi: 10.1101/cshperspect.a011437. Review. Citation on PubMed or Free article on PubMed Central More from Genetics Home Reference ...

In(1-x)Ga(x)N@ZnO: a rationally designed and quantum dot integrated material for water splitting and solar harvesting applications.

PubMed

Rajaambal, Sivaraman; Mapa, Maitri; Gopinath, Chinnakonda S

2014-09-07

The highly desirable combination of the visible light absorption properties of In1-xGaxN Quantum dots (QD) along with the multifunctionality of ZnO into a single integrated material was prepared for solar harvesting. This is the first report on InGaN QD integrated with ZnO (InGaN@ZnO), synthesized by a highly reproducible, simple combustion method in 15 min. Structural, microstructural and electronic integration of the nitride and oxide components of InGaN@ZnO was demonstrated by appropriate characterization methods. Self-assembly of InGaN QD is induced in growing nascent zinc oxo nanoclusters taking advantage of the common wurtzite structure and nitrogen incorporation at the expense of oxygen vacancies. Direct integration brings about a single phase structure exhibiting extensive visible light absorption and high photostability. InGaN@ZnO suggests synergistic operation of light harvesting and charge conducting components for solar H2 generation without using any co-catalyst or sacrificial agent, and a promising photocurrent generation at 0 V under visible light illumination. The present study suggests a direct integration of QD with the host matrix and is a potential method to realize the advantages of QDs.

SpaceX CRS-10 Post Launch News Conference

NASA Image and Video Library

2017-02-19

In the Press Site auditorium of NASA's Kennedy Space Center in Florida, Jessica Jensen, Dragon mission manager for SpaceX, speaks to the news media at a post-launch news conference following the liftoff of SpaceX CRS-10, a commercial resupply services mission to the International Space Station. SpaceX CRS-10 lifted off atop a Falcon 9 rocket from Kennedy's Launch Complex 39A at 9:39 a.m. EST.

50 CFR 665.669 - Gold coral harvest moratorium.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 13 2012-10-01 2012-10-01 false Gold coral harvest moratorium. 665.669... Island Area Fisheries § 665.669 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.669 - Gold coral harvest moratorium.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Gold coral harvest moratorium. 665.669... Island Area Fisheries § 665.669 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

50 CFR 665.669 - Gold coral harvest moratorium.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 11 2011-10-01 2011-10-01 false Gold coral harvest moratorium. 665.669... Island Area Fisheries § 665.669 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2013. ...

Low-frequency meandering piezoelectric vibration energy harvester.

PubMed

Berdy, David F; Srisungsitthisunti, Pornsak; Jung, Byunghoo; Xu, Xianfan; Rhoads, Jeffrey F; Peroulis, Dimitrios

2012-05-01

The design, fabrication, and characterization of a novel low-frequency meandering piezoelectric vibration energy harvester is presented. The energy harvester is designed for sensor node applications where the node targets a width-to-length aspect ratio close to 1:1 while simultaneously achieving a low resonant frequency. The measured power output and normalized power density are 118 μW and 5.02 μW/mm(3)/g(2), respectively, when excited by an acceleration magnitude of 0.2 g at 49.7 Hz. The energy harvester consists of a laser-machined meandering PZT bimorph. Two methods, strain-matched electrode (SME) and strain-matched polarization (SMP), are utilized to mitigate the voltage cancellation caused by having both positive and negative strains in the piezoelectric layer during operation at the meander's first resonant frequency. We have performed finite element analysis and experimentally demonstrated a prototype harvester with a footprint of 27 x 23 mm and a height of 6.5 mm including the tip mass. The device achieves a low resonant frequency while maintaining a form factor suitable for sensor node applications. The meandering design enables energy harvesters to harvest energy from vibration sources with frequencies less than 100 Hz within a compact footprint.

Granulocyte-colony stimulating factor (G-CSF)-primed, delayed marrow harvests as a source of hematopoietic stem and progenitor cells for allogeneic transplantation.

PubMed

Phillips, G L; Davey, D D; Hale, G A; Marshall, K W; Munn, R K; Nath, R; Reece, D E; Van Zant, G

1999-10-01

We evaluated the ability of G-CSF to increase the number of hematopoietic stem cells obtained by "delayed" BM harvest for allogeneic transplantation. Five normal donors received G-CSF @ 10 mcg/kg/day x 5 followed by repeat PB and BM assays at day 6 and 16, and BM harvest at day 16. Stem cells were not increased in the BM at day 16. Five patients underwent BMT and engrafted at +10 to +19 days. While the tested strategy offers no intrinsic advantages, its potential cannot be evaluated fully without alternative timing and/or additional, "early acting" growth factors.

SpaceX CRS-10 Liftoff

NASA Image and Video Library

2017-02-19

A SpaceX Falcon 9 rocket lifts off from Launch Complex 39A at NASA's Kenney Space Center in Florida. This is the company's 10th commercial resupply services mission to the International Space Station. Liftoff was at 9:39 a.m. EST from the historic launch site now operated by SpaceX under a property agreement with NASA. The Dragon spacecraft will deliver about 5,500 pounds of supplies to the space station, including the Stratospheric Aerosol and Gas Experiment (SAGE) III instrument to further study ozone in the atmosphere.

[Immobilization of pectawamorine G10x on silichromes].

PubMed

Bogatskiĭ, A V; Davidenko, T I; Gren', T A

1980-01-01

Immobilization of pectawamorine G10x on silochromes, using cyanuric chloride, 2,4-toluylene diisocyanate, glutaric dialdehyde, thionyl chloride, phosphorus tribromide, titanium tetrachloride, zirconium oxychloride and hafnium oxychloride was studied. The use of glutaric dialdehyde assured the strongest binding and the preatest stability of activity. Properties of the native pectawamorine G10x and immobilized preparations were studied on a comparative basis. Pectawamorine G10x immobilized by means of hafnium oxychloride showed increased stability when stored at 5 degrees C and used repeatedly. In every case, except for cyanuric chloride and glutaric dialdehyde, maximum activity was at a temperature 10 degrees C higher than for the native enzyme, and optimum pH varied for the preparations with different binding reagents.

Consideration of impedance matching techniques for efficient piezoelectric energy harvesting.

PubMed

Kim, Hyeoungwoo; Priya, Shashank; Stephanou, Harry; Uchino, Kenji

2007-09-01

This study investigates multiple levels of impedance-matching methods for piezoelectric energy harvesting in order to enhance the conversion of mechanical to electrical energy. First, the transduction rate was improved by using a high piezoelectric voltage constant (g) ceramic material having a magnitude of g33 = 40 x 10(-3) V m/N. Second, a transducer structure, cymbal, was optimized and fabricated to match the mechanical impedance of vibration source to that of the piezoelectric transducer. The cymbal transducer was found to exhibit approximately 40 times higher effective strain coefficient than the piezoelectric ceramics. Third, the electrical impedance matching for the energy harvesting circuit was considered to allow the transfer of generated power to a storage media. It was found that, by using the 10-layer ceramics instead of the single layer, the output current can be increased by 10 times, and the output load can be reduced by 40 times. Furthermore, by using the multilayer ceramics the output power was found to increase by 100%. A direct current (DC)-DC buck converter was fabricated to transfer the accumulated electrical energy in a capacitor to a lower output load. The converter was optimized such that it required less than 5 mW for operation.

50 CFR 665.469 - Gold coral harvest moratorium.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Gold coral harvest moratorium. 665.469... Archipelago Fisheries § 665.469 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2018. [78 FR 32182, May 29, 2013] ...

50 CFR 665.270 - Gold coral harvest moratorium.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 13 2013-10-01 2013-10-01 false Gold coral harvest moratorium. 665.270... Fisheries § 665.270 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2018. [78 FR 32182, May 29, 2013] ...

50 CFR 665.469 - Gold coral harvest moratorium.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 13 2013-10-01 2013-10-01 false Gold coral harvest moratorium. 665.469... Archipelago Fisheries § 665.469 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2018. [78 FR 32182, May 29, 2013] ...

50 CFR 665.270 - Gold coral harvest moratorium.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Gold coral harvest moratorium. 665.270... Fisheries § 665.270 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2018. [78 FR 32182, May 29, 2013] ...

50 CFR 665.169 - Gold coral harvest moratorium.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 13 2013-10-01 2013-10-01 false Gold coral harvest moratorium. 665.169... Fisheries § 665.169 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2018. [78 FR 32182, May 29, 2013] ...

50 CFR 665.169 - Gold coral harvest moratorium.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Gold coral harvest moratorium. 665.169... Fisheries § 665.169 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2018. [78 FR 32182, May 29, 2013] ...

50 CFR 665.669 - Gold coral harvest moratorium.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 13 2013-10-01 2013-10-01 false Gold coral harvest moratorium. 665.669... Island Area Fisheries § 665.669 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2018. [78 FR 32182, May 29, 2013] ...

50 CFR 665.669 - Gold coral harvest moratorium.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Gold coral harvest moratorium. 665.669... Island Area Fisheries § 665.669 Gold coral harvest moratorium. Fishing for, taking, or retaining any gold coral in any precious coral permit area is prohibited through June 30, 2018. [78 FR 32182, May 29, 2013] ...

Vibrational energy harvesting by exploring structural benefits and nonlinear characteristics

NASA Astrophysics Data System (ADS)

Wei, Chongfeng; Jing, Xingjian

2017-07-01

Traditional energy harvesters are often of low efficiency due to very limited energy harvesting bandwidth, which should also be enough close to the ambient excitation frequency. To overcome this difficulty, some attempts can be seen in the literature typically with the purposes of either increasing the energy harvesting bandwidth with a harvester array, or enhancing the energy harvesting bandwidth and peak with nonlinear coupling effect etc. This paper presents an alternative way which can achieve tuneable resonant frequency (from high frequency to ultralow frequency) and improved energy harvesting bandwidth and peak simultaneously by employing special structural benefits and advantageous displacement-dependent nonlinear damping property. The proposed energy harvesting system employs a lever systems combined with an X-shape supporting structure and demonstrates very adjustable stiffness and unique nonlinear damping characteristics which are very beneficial for energy harvesting. It is shown that the energy harvesting performance of the proposed system is directly determined by several easy-to-tune structural parameters and also by the relative displacement in a special nonlinear manner, which provides a great flexibility and/or a unique tool for tuning and improving energy harvesting efficiency via matching excitation frequencies and covering a broader frequency band. This study potentially provides a new insight into the design of energy harvesting systems by employing structural benefits and geometrical nonlinearities.

SpaceX CRS-10 Prelaunch News Conference

NASA Image and Video Library

2017-02-17

In the Kennedy Space Center’s Press Site auditorium, agency and industry leaders speak to members of the media at a prelaunch news conference for the SpaceX CRS-10 commercial resupply services mission to the International Space Station. Jessica Jensen, director of Dragon mission management for SpaceX, answers questions.

Triple Hybrid Energy Harvesting Interface Electronics

NASA Astrophysics Data System (ADS)

Uluşan, H.; Chamanian, S.; Pathirana, W. M. P. R.; Zorlu, Ö.; Muhtaroğlu, A.; Külah, H.

2016-11-01

This study presents a novel triple hybrid system that combines simultaneously generated power from thermoelectric (TE), vibration-based electromagnetic (EM) and piezoelectric (PZT) harvesters for a relatively high power supply capability. In the proposed solution each harvesting source utilizes a distinct power management circuit that generates a DC voltage suitable for combining the three parallel supplies. The circuits are designed and implemented in 180 nm standard CMOS technology, and are terminated with a schottky diode to avoid reverse current flow. The harvested AC signal from the EM harvester is rectified with a self-powered AC-DC doubler, which utilizes active diode structures to minimize the forward- bias voltage drop. The PZT interface electronics utilizes a negative voltage converter as the first stage, followed by synchronous power extraction and DC-to-DC conversion through internal switches, and an external inductor. The ultra-low voltage DC power harvested by the TE generator is stepped up through a charge-pump driven by an LC oscillator with fully- integrated center-tapped differential inductors. Test results indicate that hybrid energy harvesting circuit provides more than 1 V output for load resistances higher than 100 kΩ (10 μW) where the stand-alone harvesting circuits are not able to reach 1 V output. This is the first hybrid harvester circuit that simultaneously extracts energy from three independent sources, and delivers a single DC output.

77 FR 39573 - Additional Designations, Foreign Narcotics Kingpin Designation Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

..., Ali Houssein (a.k.a. HARB, Ali Hussein), Calle 10A No. 11-63, Maicao, La Guajira, Colombia; Calle 13... to the Kingpin Act: SALEH, Ali Mohamad, c/o ALMACEN BATUL; c/o COMERCIAL ESTILO Y MODA; DOB 1 Jan 1974; Cedula No. 1124006380 (Colombia) (individual) [SDNTK]. The listing appears as follows: SALEH, Ali...

50 CFR 31.13 - Do we allow commercial harvest of fishery resources?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Do we allow commercial harvest of fishery... Conditions of Wildlife Reduction and Disposal § 31.13 Do we allow commercial harvest of fishery resources? Refuge managers may allow commercial harvest of fishery resources by issuance of a permit or by refuge...

SpaceX CRS-10 Post Launch News Conference

NASA Image and Video Library

2017-02-19

In the Press Site auditorium of NASA's Kennedy Space Center in Florida, NASA and industry leaders speak to media at a post-launch news conference following the liftoff of SpaceX CRS-10, a commercial resupply services mission to the International Space Station. From left are: William Spetch, deputy manager of the International Space Station Transportation Office; Jessica Jensen, Dragon mission manager for SpaceX; and Pam Underwood, manager of the Operations Integration Division of the Federal Aviation Administration Office of Commercial Space Transportation. SpaceX CRS-10 lifted off atop a Falcon 9 rocket from Kennedy's Launch Complex 39A at 9:39 a.m. EST.

SpaceX CRS-10 Post Launch News Conference

NASA Image and Video Library

2017-02-19

In the Press Site auditorium of NASA's Kennedy Space Center in Florida, NASA and industry leaders speak to media at a post-launch news conference following the liftoff of SpaceX CRS-10, a commercial resupply services mission to the International Space Station. From left are: George Diller, NASA Communications; William Spetch, deputy manager of the International Space Station Transportation Office; Jessica Jensen, Dragon mission manager for SpaceX; and Pam Underwood, manager of the Operations Integration Division of the Federal Aviation Administration Office of Commercial Space Transportation. SpaceX CRS-10 lifted off atop a Falcon 9 rocket from Kennedy's Launch Complex 39A at 9:39 a.m. EST.

SpaceX CRS-10 Post Launch Press Conference

NASA Image and Video Library

2017-02-19

In the Press Site auditorium of NASA's Kennedy Space Center in Florida, NASA and industry leaders speak to media at a post-launch news conference following the liftoff of SpaceX CRS-10, a commercial resupply services mission to the International Space Station. From left are: George Diller, NASA Communications; William Spetch, deputy manager of the International Space Station Transportation Office; Jessica Jensen, Dragon mission manager for SpaceX; and Pam Underwood, manager of the Operations Integration Division of the Federal Aviation Administration Office of Commercial Space Transportation. SpaceX CRS-10 lifted off atop a Falcon 9 rocket from Kennedy's Launch Complex 39A at 9:39 a.m. EST.

SpaceX CRS-10 Post Launch News Conference

NASA Image and Video Library

2017-02-19

In the Press Site auditorium of NASA's Kennedy Space Center in Florida, William Spetch, deputy manager of the International Space Station Transportation Office, speaks to the news media at a post-launch news conference following the liftoff of SpaceX CRS-10, a commercial resupply services mission to the International Space Station. SpaceX CRS-10 lifted off atop a Falcon 9 rocket from Kennedy's Launch Complex 39A at 9:39 a.m. EST.

High-frequency electron-spin-resonance measurements on Mn x Mg1-x O (x = 1.0×10-4) and DPPH at very low temperatures

NASA Astrophysics Data System (ADS)

Ishikawa, Y.; Ohya, K.; Miura, S.; Fujii, Y.; Mitsudo, S.; Mizusaki, T.; Fukuda, A.; Matsubara, A.; Kikuchi, H.; Asano, T.; Yamamori, H.; Lee, S.; Vasiliev, S.

2018-03-01

We have developed a millimeter-wave electron-spin-resonance (ESR) system for very low temperatures (T < 1 K) that can be employed for nuclear-magnetic-resonance measurements by using dynamic nuclear polarization. The system uses a Fabry-Pérot resonator that works in the frequency range of 125 – 130 GHz and covers the temperature range of 0.09 – 6.5 K. We have performed ESR measurements in the frequency around 128 GHz by using Mn x Mg1-x O (x = 1.0 × 10-4) and free-radical samples of 1, 1-diphenyl-2-picrylhydrazyl (DPPH), because these samples have been proposed as field and sensitivity markers. Temperature dependence of the ESR signal intensity for Mn x Mg1-x O shows anomalies originating from magnetic order are found around 3.5 – 4 K. We estimate the sensitivity of the system for ESR detections to be 6 × 1013 spins/G at 5.8 K. Because DPPH shows no observable shift in the magnetic field, we propose it as a useful standard marker for ESR measurements at very low temperatures.

Sub-10-ms X-ray tomography using a grating interferometer

NASA Astrophysics Data System (ADS)

Yashiro, Wataru; Noda, Daiji; Kajiwara, Kentaro

2017-05-01

An X-ray phase tomogram was successfully obtained with an exposure time of less than 10 ms by X-ray grating interferometry, an X-ray phase imaging technique that enables high-sensitivity X-ray imaging even of materials consisting of light elements. This high-speed X-ray imaging experiment was performed at BL28B2, SPring-8, where a white X-ray beam is available, and the tomogram was reconstructed from projection images recorded at a frame rate of 100,000 fps. The setup of the experiment will make it possible to realize three-dimensional observation of unrepeatable high-speed phenomena with a time resolution of less than 10 ms.

SpaceX CRS-10 Post Launch News Conference

NASA Image and Video Library

2017-02-19

In the Press Site auditorium of NASA's Kennedy Space Center in Florida, Pam Underwood, manager of the Operations Integration Division of the Federal Aviation Administration Office of Commercial Space Transportation, speaks to the news media at a post-launch news conference following the liftoff of SpaceX CRS-10, a commercial resupply services mission to the International Space Station. SpaceX CRS-10 lifted off atop a Falcon 9 rocket from Kennedy's Launch Complex 39A at 9:39 a.m. EST.

Calibration of TOPEX/POSEIDON at Platform Harvest

NASA Technical Reports Server (NTRS)

Christensen, E. J.; Haines, B. J.; Keihm, S. J.; Morris, C. S.; Norman, R. A.; Purcell, G. H.; Williams, B. G.; Wilson, B. D.; Born, G. H.; Parke, M. E.

1994-01-01

We present estimates for the mean bias of the TOPEX/POSEIDON NASA altimeter (ALT) and the Centre National d'Etudes Spatiales altimeter (SSALT) using in-situ data gathered at Platform Harvest during the first 36 cycles of the mission. Data for 21 overflights of the ALT and six overflights of the SSALT have been analyzed. The analysis includes an independent assessment of in-situ measurements of sea level, the radial component of the orbit, wet tropospheric path delay, and ionospheric path delay. (The sign convention used is such that, to correct the geophysical data record values for sea level, add the bias algebraically. Unless otherwise stated, the uncertainty in a given parameter is depicted by +/- sigma(sub x), where sigma(sub x) is the sample standard deviation of x about the mean.) Tide gauges at Harvest provide estimates of sea level with an uncertainty of +/- 1.5 cm. The uncertainty in the radial component of the orbit is estimated to be +/- 1.3 cm. In-situ measurements of tropopsheric path delay at Harvest compare to within +/- 1.3 cm of the TOPEX/POSEIDON microwave radiometer, and in-situ measurements of the ionospheric path delay compare to within -0.4 +/- 0.7 cm of the dual-frequency ALT and 1.1 +/- 0.6 cm of Doppler orbitography and radiopositioning integrated by satellite. We obtain mean bias estimates of -14.5 +/- 2.9 cm for the ALT and +0.9 +/- 3.1 cm for the SSALT (where the uncertainties are based on the standard deviation of the estimated mean (sigma(sub bar x/y), which is derived from sample statistics and estimates for errors that cannot be observed). These results are consistent with independent estimates for the relative bias between the two altimeters. A linear regression applied to the complete set of data shows that there is a discernable secular trend in the time series for the ALT bias estimates. A preliminary analysis of data obtained through cycle 48 suggests that the apparent secular drift may be the result of a poorly sampled annual

Effects of horseshoe crab harvest in delaware bay on red knots: Are harvest restrictions working?

USGS Publications Warehouse

Niles, L.J.; Bart, J.; Sitters, H.P.; Dey, A.D.; Clark, K.E.; Atkinson, P.W.; Baker, Allan J.; Bennett, K.A.; Kalasz, K.S.; Clark, N.A.; Clark, J.; Gillings, S.; Gates, A.S.; Gonzalez, P.M.; Hernandez, D.E.; Minton, C.D.T.; Morrison, R.I.G.; Porter, R.R.; Ross, R.K.; Veitch, C.R.

2009-01-01

Each May, red knots (Calidris canutus rufa) congregate in Delaware Bay during their northward migration to feed on horseshoe crab eggs (Limulus polyphemus) and refuel for breeding in the Arctic. During the 1990s, the Delaware Bay harvest of horseshoe crabs for bait increased 10-fold, leading to a more than 90% decline in the availability of their eggs for knots. The proportion of knots achieving weights of more than 180 grams by 26-28 May, their main departure period, dropped from 0.6-0.8 to 0.14-0.4 over 1997-2007. During the same period, the red knot population stopping in Delaware Bay declined by more than 75%, in part because the annual survival rate of adult knots wintering in Tierra del Fuego declined. Despite restrictions, the 2007 horseshoe crab harvest was still greater than the 1990 harvest, and no recovery of knots was detectable. We propose an adaptive management strategy with recovery goals and annual monitoring that, if adopted, will both allow red knot and horseshoe crab populations to recover and permit a sustainable harvest of horseshoe crabs.

xLPR Sim Editor 1.0 User's Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mariner, Paul E.

2017-03-01

The United States Nuclear Regulatory Commission in cooperation with the Electric Power Research Institute contracted Sandia National Laboratories to develop the framework of a probabilistic fracture mechanics assessment code called xLPR ( Extremely Low Probability of Rupture) Version 2.0 . The purpose of xLPR is to evaluate degradation mechanisms in piping systems at nuclear power plants and to predict the probability of rupture. This report is a user's guide for xLPR Sim Editor 1.0 , a graphical user interface for creating and editing the xLPR Version 2.0 input file and for creating, editing, and using the xLPR Version 2.0 databasemore » files . The xLPR Sim Editor, provides a user - friendly way for users to change simulation options and input values, s elect input datasets from xLPR data bases, identify inputs needed for a simulation, and create and modify an input file for xLPR.« less

Biogeography of photosynthetic light-harvesting genes in marine phytoplankton.

PubMed

Bibby, Thomas S; Zhang, Yinan; Chen, Min

2009-01-01

Photosynthetic light-harvesting proteins are the mechanism by which energy enters the marine ecosystem. The dominant prokaryotic photoautotrophs are the cyanobacterial genera Prochlorococcus and Synechococcus that are defined by two distinct light-harvesting systems, chlorophyll-bound protein complexes or phycobilin-bound protein complexes, respectively. Here, we use the Global Ocean Sampling (GOS) Project as a unique and powerful tool to analyze the environmental diversity of photosynthetic light-harvesting genes in relation to available metadata including geographical location and physical and chemical environmental parameters. All light-harvesting gene fragments and their metadata were obtained from the GOS database, aligned using ClustalX and classified phylogenetically. Each sequence has a name indicative of its geographic location; subsequent biogeographical analysis was performed by correlating light-harvesting gene budgets for each GOS station with surface chlorophyll concentration. Using the GOS data, we have mapped the biogeography of light-harvesting genes in marine cyanobacteria on ocean-basin scales and show that an environmental gradient exists in which chlorophyll concentration is correlated to diversity of light-harvesting systems. Three functionally distinct types of light-harvesting genes are defined: (1) the phycobilisome (PBS) genes of Synechococcus; (2) the pcb genes of Prochlorococcus; and (3) the iron-stress-induced (isiA) genes present in some marine Synechococcus. At low chlorophyll concentrations, where nutrients are limited, the Pcb-type light-harvesting system shows greater genetic diversity; whereas at high chlorophyll concentrations, where nutrients are abundant, the PBS-type light-harvesting system shows higher genetic diversity. We interpret this as an environmental selection of specific photosynthetic strategy. Importantly, the unique light-harvesting system isiA is found in the iron-limited, high-nutrient low-chlorophyll region of

Evaluation of modern cotton harvest systems on irrigated cotton: harvester performance

USDA-ARS?s Scientific Manuscript database

Picker and stripper harvest systems were evaluated on production-scale irrigated cotton on the High Plains of Texas over three harvest seasons. Observations on harvester performance, including time-in-motion, harvest loss, seed cotton composition, and turnout, were conducted at seven locations with...

Photocopy of drawing (this photograph is an 8' x 10' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8' x 10' copy of an 8' x 10' negative; 1917 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Building No. 18, Marine Barracks Sheet No. 1 - U.S. Naval Air Station, Marine Barracks, 232 East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; microfilm of 1935 architectural drawing located at NARA) Quarters "I" Floor plan, sheet 1 of 1 - U.S. Naval Air Station, Senior Officers' Quarters Q-2, Q-2 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; microfilm of 1908 architectural drawing located at NARA) Plumbing arrangement for quarters G and I - U.S. Naval Air Station, Senior Officers' Quarters Q-2, Q-2 North Avenue, Pensacola, Escambia County, FL

Recent Rates of Forest Harvest and Conversion in North America

NASA Technical Reports Server (NTRS)

Masek, Jeffrey G.; Cohen, Warren B.; Leckie, Donald; Wulder, Michael A.; Vargas, Rodrigo; de Jong, Ben; Healey, Sean; Law, Beverly; Birdsey, Richard; Houghton, R. A.;

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1987 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) HANDICAP RESTROOM, BUILDING NO. 1, SHEET 1 OF 2 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1923 architectural drawing located at NAS Pensacola, Florida, Building No. 458) PLAN FOR BUILDING NO. 107 WITH DIAGRAM OF AMMONIA REFRIGERATION SYSTEM. - U.S. Naval Air Station, Refrigeration Plant, Center Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; undated architectural drawing located at NAS Pensacola, Florida, Building No. 458) PLAN AND SECTION OF 23 FOOT EXTENSION TO BUILDING NO. 107. - U.S. Naval Air Station, Refrigeration Plant, Center Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1968 architectural drawing located at NAS Pensacola, Florida, Building No. 458) PLANS, SECTION, AND DETAILS FOR A FIREPROOF VAULT IN BUILDING NO. 322. - U.S. Naval Air Station, YMCA Building, West Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1933 architectural drawing located at NAS Pensacola, Florida, Building No. 458) ALTERATIONS TO LIBRARY, BUILDING NO. 322, PANELING DETAILS, SHEET 2 OF 3. - U.S. Naval Air Station, YMCA Building, West Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 2005 architectural drawing located at NAS Pensacola, Florida, Building No. 51) BUILDING NO. 51, FIRE EXTINGUISHER REPAIR/STORAGE, FIRST LEVEL FLOOR PLAN - U.S. Naval Air Station, Locomotive Shed, South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 2005 architectural drawing located at NAS Pensacola, Florida, Building No. 51) BUILDING NO. 51, FIRE EXTINGUISHER REPAIR/STORAGE, SECOND LEVEL FLOOR PLAN - U.S. Naval Air Station, Locomotive Shed, South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1956 original architectural drawing located at Building No. 458, NAS, Pensacola, Florida) QUARTERS Q-8 FLOOR PLAN, SHEET 1 OF 1 - U.S. Naval Air Station, Captain's Quarters, Q-8 North Avenue, Pensacola, Escambia County, FL

Harvesting

USDA-ARS?s Scientific Manuscript database

The spindle picker and brush-roll stripper are the two machines used to harvest cotton produced in the United States. Adoption of each harvester type is dictated by regional differences in regard to production environment, production practices, cultivar, and yield. The spindle picker is a selectiv...

Photocopy of drawing (this photograph is an 8' x 10' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8' x 10' copy of an 8' x 10' negative; 1996 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Marine Complex, Building No. 18 Toilet/Shower room elevations, Sheet no. 21 - U.S. Naval Air Station, Marine Barracks, 232 East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1963 architectural drawing located at NAS Pensacola, Florida, Building No. 458) BUILDING NO. 107 EQUIPMENT LOCATION FOR ADDITIONAL PROCESS FACILITIES, SHEET 3 OF 7. - U.S. Naval Air Station, Refrigeration Plant, Center Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1962 architectural drawing located at NAS Pensacola, Florida, Building No. 458) BUILDING NO. 322, RENOVATION FOR OCCUPANCY BY PEN-AIR CREDIT UNION, ELECTRICAL PLANS. - U.S. Naval Air Station, YMCA Building, West Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1955 architectural drawing located at NAS Pensacola, Florida, Building No. 458) ROMAN CATHOLIC CHAPEL, BUILDING NO. 322, FLOOR PLAN AND ELEVATIONS, SHEET 1 OF 1. - U.S. Naval Air Station, YMCA Building, West Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1916 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) FREIGHT ELEVATOR, BUILDING NO. 1, GENERAL ARRANGEMENT, SHEET 1 OF 1 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1965 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Quarters 3 floor plans, Sheet 1 of 1 - U.S. Naval Air Station, Senior Officers' Quarters Q-3, Q-3 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1972 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Alterations to Quarters 2, sheet 1 of 2 - U.S. Naval Air Station, Senior Officers' Quarters Q-2, Q-2 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1935 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Quarters 3 floor plans, Sheet 1 of 1 - U.S. Naval Air Station, Senior Officers' Quarters Q-3, Q-3 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1964 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Quarters 2 electrical plan, sheet 1 of 1 - U.S. Naval Air Station, Senior Officers' Quarters Q-2, Q-2 North Avenue, Pensacola, Escambia County, FL

Improved priming for mobilization of and optimal timing for harvest of peripheral blood stem cells.

PubMed

Knudsen, L M; Gaarsdal, E; Jensen, L; Nielsen, K J; Nikolaisen, K; Johnsen, H E

1996-08-01

The time of stem cell harvest and the mobilization regimen may play important roles in terms of achieving adequate numbers of stem cells by leukapheresis. To optimize the timing of leukapheresis, we have determined simultaneously the number of CD34+ cells in the peripheral blood as well as in the leukapheresis product of 214 apheresis procedures performed in 66 unselected patients with malignant hematologic diseases and solid tumors. A significant correlation between the number of CD34+ cells in peripheral blood and the leukapheresis product (R = 0.8) was found. The presence of more than 20 x 10(3)/ml blood CD34+ cells gave a sufficient yield (> or = 1.0 x 10(6) CD34+ cells/kg) in 81% of the cases. In an attempt to compare two priming regimens, we performed leukapheresis twice in 12 patients with stable disease. In the first sequence, stem cells were mobilized with rhG-CSF (10 micrograms/kg/day) alone and, in the second sequence, with cyclophosphamide (4 g/m2) plus rhG-CSF. A significantly higher yield of CD34+ cells and a better correlation between CD34+ cells in the peripheral blood and the leukapheresis product were found after priming with high-dose cyclophosphamide plus rhG-CSF, compared with priming with rhG-CSF alone. In a multivariate analysis, three factors were found to correlate with the yield of CD34+ cells, namely prior chemotherapy, bone marrow function, and the mobilization regimen. The use of cyclophosphamide priming improves CD34+ mobilization, and the introduction of blood CD34+ level optimizes the timing for harvest of stem cells, which should be performed early during treatment of malignancies.

Harvests from bone marrow donors who weigh less than their recipients are associated with a significantly increased probability of a suboptimal harvest yield.

PubMed

Anthias, Chloe; Billen, Annelies; Arkwright, Rebecca; Szydlo, Richard M; Madrigal, J Alejandro; Shaw, Bronwen E

2016-05-01

Previous studies have demonstrated the importance of bone marrow (BM) harvest yield in determining transplant outcomes, but little is known regarding donor and procedure variables associated with achievement of an optimal yield. We hypothesized that donor demographics and variables relating to the procedure were likely to impact the yield (total nucleated cells [TNCs]/kg recipient weight) and quality (TNCs/mL) of the harvest. To test our hypothesis, BM harvests of 110 consecutive unrelated donors were evaluated. The relationship between donor or procedure characteristics and the BM harvest yield was examined. The relationship between donor and recipient weight significantly influenced the harvest yield; only 14% of BM harvests from donors who weighed less than their recipient achieved a TNC count of more than 4 × 10(8) /kg compared to 56% of harvests from donors heavier than their recipient (p = 0.001). Higher-volume harvests were significantly less likely to achieve an optimal yield than lower-volume harvests (32% vs. 78%; p = 0.007), and higher-volume harvests contained significantly fewer TNCs/mL, indicating peripheral blood contamination. BM harvest quality also varied significantly between collection centers adding to recent concerns regarding maintenance of BM harvest expertise within the transplant community. Since the relationship between donor and recipient weight has a critical influence yield, we recommend prioritizing this secondary donor characteristic when selecting from multiple well-matched donors. Given the declining number of requests for BM harvests, it is crucial that systems are developed to train operators and ensure expertise in this procedure is retained. © 2016 AABB.

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1993 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) REPAIR AND RESTORATION OF BUILDING NO. 74, ARCHITECTURAL FLOOR PLAN, SHEET 5 OF 17 - U.S. Naval Air Station, Seaplane Hangar, 521 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1991 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Replace windows, Building No. 45, Architectural building elevations, Sheet 2 of 2 - U.S. Naval Air Station, Equipment Shops & Offices, 206 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1983 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) CORRECT FIRE/SAFETY DEFICIENCIES, BUILDING NO. 1, SECTIONS AND DETAILS, SHEET 3 OF 3 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; ca. 1910 original architectural drawing located at National Archives and Records Administration NARA) PLAN OF BUILDING NO.1 BOAT, SHIPWRIGHT AND JOINER SHOP, SHEET 2 OF 4 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8' x 10' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8' x 10' copy of an 8' x 10' negative; 1996 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Marine Complex, Building No. 18, Plumbing, First floor plan- Area A, Sheet No. 35 - U.S. Naval Air Station, Marine Barracks, 232 East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1963 architectural drawing located at NAS Pensacola, Florida, Building No. 458) BUILDING NO. 107 PLANS, DETAILS, AND SCHEDULES FOR ADDITIONAL PROCESS FACILITIES, SHEET 2 OF 7. - U.S. Naval Air Station, Refrigeration Plant, Center Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1963 architectural drawing located at NAS Pensacola, Florida, Building No. 458) BUILDING NO. 107 ELEVATIONS AND WLL SECTION FOR ADDITIONAL PROCESS FACILITIES, SHEET 1 OF 7. - U.S. Naval Air Station, Refrigeration Plant, Center Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1960 architectural drawing located at NAS Pensacola, Florida, Building No. 458) BUILDING NO. 107 DETAILS OF EXTRUDER, RUBBER PRESS AND VENTILATION INSTALLATIONS, SHEET 3 OF 6. - U.S. Naval Air Station, Refrigeration Plant, Center Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1996 architectural drawing located at NAS Pensacola, Florida, Building No. 458) MARINE COMPLEX, BUILDING NO. 52, FIRST AND SECOND FLOOR PLANS INDICATING COMMUNICATION LINES AND CONNECTIONS, SHEET45. - U.S. Naval Air Station, Paint Shop, 222 East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1975 architectural drawing located at NAS Pensacola, Florida, Building No. 458) MECHANICAL PLAN, ELECTRICAL PLAN, FLOOR PLAN AND DETAILS FOR ALTERATIONS TO BUILDING NO. 322, SHEET 1 OF 1. - U.S. Naval Air Station, YMCA Building, West Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1945 architectural drawing located at NAS Pensacola, Florida, Building No. 458) ROMAN CATHOLIC CHAPEL, BUILDING NO. 322, PLAN AND SECTIONS FOR VENTILATION IMPROVEMENTS, SHEET 1 OF 1. - U.S. Naval Air Station, YMCA Building, West Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1923 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) PLAN OF BUILDING NO. 1 JOINER, FABRIC AND PAINT SHOP, PROPOSED LOCATION OF RADIATORS - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1983 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) CORRECT FIRE/SAFETY DEFICIENCIES, BUILDING NO. 1, FIRE PROTECTION CEILING PLANS, SHEET 2 OF 3 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1875 original architectural drawing located at NARA) Officers quarters US Navy Yard Pensacola, partition wall quarters B, C,D,E,H,K,M - U.S. Naval Air Station, Senior Officers' Quarters Q-2, Q-2 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1987 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Quarters 3, Exterior painting, legends and floor plans, Sheet 1 of 3 - U.S. Naval Air Station, Senior Officers' Quarters Q-3, Q-3 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1871 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Temporary Officers Quarters Ground plans of kitchens to officers quarters - U.S. Naval Air Station, Senior Officers' Quarters Q-3, Q-3 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; undated architectural drawing located at NAS Pensacola, Florida, Building No. 38-A) DESIGN FOR BOILER AND DYNAMO ROOMS. C AND R DEPARTMENT AT U.S. NAVY YARD, PENSACOLA FLA. - U.S. Naval Air Station, Blacksmith Shop, South Avenue, Pensacola, Escambia County, FL

Variation in cassava germplasm for tolerance to post-harvest physiological deterioration.

PubMed

Venturini, M T; Santos, L R; Vildoso, C I A; Santos, V S; Oliveira, E J

2016-05-06

Tolerant varieties can effectively control post-harvest physiological deterioration (PPD) of cassava, although knowledge on the genetic variability and inheritance of this trait is needed. The objective of this study was to estimate genetic parameters and identify sources of tolerance to PPD and their stability in cassava accessions. Roots from 418 cassava accessions, grown in four independent experiments, were evaluated for PPD tolerance 0, 2, 5, and 10 days post-harvest. Data were transformed into area under the PPD-progress curve (AUP-PPD) to quantify tolerance. Genetic parameters, stability (Si), adaptability (Ai), and the joint analysis of stability and adaptability (Zi) were obtained via residual maximum likelihood (REML) and best linear unbiased prediction (BLUP) methods. Variance in the genotype (G) x environment (E) interaction and genotypic variance were important for PPD tolerance. Individual broad-sense heritability (hg(2)= 0.38 ± 0.04) and average heritability in accessions (hmg(2)= 0.52) showed high genetic control of PPD tolerance. Genotypic correlation of AUP-PPD in different experiments was of medium magnitude (ȓgA = 0.42), indicating significant G x E interaction. The predicted genotypic values o f G x E free of interaction (û + ĝi) showed high variation. Of the 30 accessions with high Zi, 19 were common to û + ĝi, Si, and Ai parameters. The genetic gain with selection of these 19 cassava accessions was -55.94, -466.86, -397.72, and -444.03% for û + ĝi, Si, Ai, and Zi, respectively, compared with the overall mean for each parameter. These results demonstrate the variability and potential of cassava germplasm to introduce PPD tolerance in commercial varieties.

70. Photocopy of 4' 10 x 3'10 Propeller, U.S. Coast ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

70. Photocopy of 4' 10 x 3'10 Propeller, U.S. Coast Guard 133 Ft. Tender. Columbian Bronze Corporation, Freeport, Long Island, New York, Coast Guard Headquarters Drawing No. 540-WAGL-4400-4, dated July 1953. Original drawing property of the U.S. Coast Guard. - U.S. Coast Guard Cutter WHITE HEATH, USGS Integrated Support Command Boston, 427 Commercial Street, Boston, Suffolk County, MA

Comparison of the 10x10 and the 8x6 Supersonic Wind Tunnels at the NASA Glenn Research Center for Low-Speed (Subsonic) Operation

NASA Technical Reports Server (NTRS)

Hoffman, Thomas R.; Johns, Albert L.; Bury, Mark E.

2002-01-01

NASA Glenn Research Center and Lockheed Martin tested an aircraft model in two wind tunnels to compare low-speed (subsonic) flow characteristics. Test objectives were to determine and document similarities and uniqueness of the tunnels and to verify that the 10- by 10-Foot Supersonic Wind Tunnel (10x10 SWT) is a viable low-speed test facility when compared to the 8- by 6-Foot Supersonic Wind Tunnel (8x6 SWT). Conclusions are that the data from the two facilities compares very favorably and that the 10-by 10-Foot Supersonic Wind Tunnel at NASA Glenn Research Center is a viable low-speed wind tunnel.

Flux free single crystal growth and characterization of FeTe1-xSx (x=0.00 and 0.10) crystals

NASA Astrophysics Data System (ADS)

Maheshwari, P. K.; Awana, V. P. S.

2018-05-01

We report synthesis of S doped FeTe1-xSx (x = 0.00 and 0.10) single crystals using flux free method via solid state reaction. Single crystal XRD patterns of FeTe1-xSx (x = 0.00 and 0.10) confirm the single crystalline property, as the crystals are grown in (00l) plane only. Powder XRD result of FeTe1-xSx (x = 0.00 and 0.10) crystals show that crystalline in tetragonal structure having P4/nmm space group. Rietveld refinement results show that both a and c lattice parameters decreases with S doping of 10% at Te site in FeTe1-xSx. Detailed scanning electron microscopy (SEM) image of FeTe0.90S0.10 shows that the growth of crystal is in slab-like morphology. Electrical resistivity measurement results onset confirm the superconductivity in S doped 10% sample at Te site and superconducting transition Tconset occurs at 9.5K and Tcoffset(ρ=0) occurs at 6.5K. ρ-T measurement has been performed under various magnetic field up to 12 Tesla down to 2K. Upper critical field Hc2(0), for x=0.10, which comes around 70Tesla, 60Tesla and 45Tesla of normal resistivity criterion ρn = 90%, 50% and 10% criterion respectively.

Note: Enhanced energy harvesting from low-frequency magnetic fields utilizing magneto-mechano-electric composite tuning-fork.

PubMed

Yang, Aichao; Li, Ping; Wen, Yumei; Yang, Chao; Wang, Decai; Zhang, Feng; Zhang, Jiajia

2015-06-01

A magnetic-field energy harvester using a low-frequency magneto-mechano-electric (MME) composite tuning-fork is proposed. This MME composite tuning-fork consists of a copper tuning fork with piezoelectric Pb(Zr(1-x)Ti(x))O3 (PZT) plates bonded near its fixed end and with NdFeB magnets attached at its free ends. Due to the resonance coupling between fork prongs, the MME composite tuning-fork owns strong vibration and high Q value. Experimental results show that the proposed magnetic-field energy harvester using the MME composite tuning-fork exhibits approximately 4 times larger maximum output voltage and 7.2 times higher maximum power than the conventional magnetic-field energy harvester using the MME composite cantilever.

1971 Oregon timber harvest.

Treesearch

Brian R. Wall

1972-01-01

The 1971 Oregon timber harvest of 9.03 billion board feet was the highest since 1969 when 9.15 billion board feet was harvested. The 1971 total harvest was 13.1 percent above the 1970 figure. Western Oregon's harvest rose 11-5 percent, and eastern Oregon's harvest rose 18.6 percent.

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5”archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MAY 5, 1933 PHOTOGRAPH NO. 10 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PILE RIG AT PIER C. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JULY 10, 1933 PHOTOGRAPH NO. 27 OF CONTRACT NO. 5 SHOWING EAST APPROACH – PEDESTALS AND FORMS FOR HIGHWAY ABUTMENT. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1989 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Interior renovation, Navy recruiting orientation unit, Building No. 45, Architectural floor plan and window details, Sheet 3 of 29 - U.S. Naval Air Station, Equipment Shops & Offices, 206 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1969 original architectural drawing, for 1969 addition, located at Building No. 458, NAS Pensacola, Florida) ARCHITECTURAL ELEVATIONS FOR ADDITION TO BUILDING NO. 604 FOR A CONSOLIDATED PLATING FACILITY, SHEET 7 OF 135. - U.S. Naval Air Station, Assembly & Repair Shop, East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1989 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Interior renovation, Navy recruiting orientation unit, Building No. 45, Architectural second floor plan, Sheet 4 of 29 - U.S. Naval Air Station, Equipment Shops & Offices, 206 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1989 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Interior renovation, Navy recruiting orientation unit, Building No. 45, Architectural third floor plan, Sheet 5 of 29 - U.S. Naval Air Station, Equipment Shops & Offices, 206 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1987 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) RENOVATED STORAGE AREA, MEZZANINE LEVEL, BUILDING NO. 1, ARCHITECTURAL FLOOR PLAN AND DETAILS, SHEET 1 OF 2 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1991 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) INTERIOR MODIFICATION SECOND FLOOR, BUILDING NO. 1, ARCHITECTURAL PLANS, SECTIONS AND SCHEDULES, SHEET 1 OF 3 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1990 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Quarters "4" as built floor plans, architectural floor plan (first floor), sheet 1 of 2 - U.S. Naval Air Station, Senior Officers' Quarters Q-4, Q-4 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1989 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Interior renovation, Navy recruiting orientation unit, Building No. 45, Architectural floor plan and general notes, Sheet 2 of 29 - U.S. Naval Air Station, Equipment Shops & Offices, 206 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1990 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Quarters "4" as built floor plans, architectural floor plan (second floor), sheet 2 of 2 - U.S. Naval Air Station, Senior Officers' Quarters Q-4, Q-4 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1949 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) INSTALLATION OF FREIGHT ELEVATOR, BUILDING NO. 1, PLANS, SECTIONS, AND DETAILS OF EXISTING HOISTWAY, SHEET 1 OF 1 - U.S. Naval Air Station, Ship Carpenter's Workshop, 368 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8' x 10' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8' x 10' copy of an 8' x 10' negative; 1952 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Conversion of Building No. 18 for overhaul and repair department electronics shop, second floor equipment plan, sheet 7 of 21 - U.S. Naval Air Station, Marine Barracks, 232 East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8' x 10' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8' x 10' copy of an 8' x 10' negative; 1952 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Conversion of Building No. 18 for overhaul and repair department electronics shop, section, elevations and details, sheet 3 of 21 - U.S. Naval Air Station, Marine Barracks, 232 East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8' x 10' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8' x 10' copy of an 8' x 10' negative; 1952 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Conversion of Building No. 18 for overhaul and repair department electronics shop, elevations and details, sheet 2 of 21 - U.S. Naval Air Station, Marine Barracks, 232 East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8' x 10' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8' x 10' copy of an 8' x 10' negative; 1944 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Photographic school building No. 18, air conditioning small dark room, first floor plan, sheet 1 of 2 - U.S. Naval Air Station, Marine Barracks, 232 East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; microfilm of 1908 architectural drawing located at National Archives and Records Administration at College Park, Maryland) Plumbing arrangement for Quarters G and I, Sheet 4 of 4 - U.S. Naval Air Station, Senior Officers' Quarters Q-3, Q-3 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1938 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Quarters "I" Alterations to west porch, floor plan and details, sheet 1 of 1 - U.S. Naval Air Station, Senior Officers' Quarters Q-2, Q-2 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1977 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Repairs of various quarters, Quarters No. 3, plans, elevations and details, Sheet 2 of 4 - U.S. Naval Air Station, Senior Officers' Quarters Q-3, Q-3 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1936 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Quarters "I" Alterations to west porch, floor plan and details, sheet 1 of 1 - U.S. Naval Air Station, Senior Officers' Quarters Q-2, Q-2 North Avenue, Pensacola, Escambia County, FL

SpaceX CRS-10 What's on Board Science Briefing

NASA Image and Video Library

2017-02-17

During the SpaceX CRS-10 "What's On Board?" Science Briefing inside the Press Site Auditorium, members of social media learned about the science aboard the Dragon spacecraft. The briefing focused on growth of crystals in microgravity planned for the International Space Station following the arrival of a Dragon spacecraft. The Dragon is scheduled to be launched from Kennedy’s Launch Complex 39A on Feb. 18 atop a SpaceX Falcon 9 rocket on the company's 10th Commercial Resupply Services mission to the space station.

Harvesting

Treesearch

John R. Jones; Wayne D. Shepperd

1985-01-01

Harvesting is the removal of produce from the forest for utilization. It includes cutting, any further initial processing, such as topping and trimming, and extraction (Ford-Robertson 1971). Commercial intermediate cutting, such as commercial thinning, as well as regeneration cutting are included. Harvesting and the income that it produces sometimes is regarded as an...

1975 Washington timber harvest.

Treesearch

J.D. Jr. Lloyd

1977-01-01

In 1975, the Washington timber harvest declined for the 2d year to 6.2 billion board feet, 10 percent below 1974, and the lowest level in 8 years. The decrease, which occurred on almost all ownerships, amounted to 561 million board feet in western Washington and 130 million board feet in eastern Washington.

The X-Ray Binary Population of the Nearby Dwarf Starburst Galaxy IC 10: Variable and Transient X-Ray Sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laycock, Silas; Cappallo, Rigel; Williams, Benjamin F.

We have monitored the Cassiopeia dwarf galaxy (IC 10) in a series of 10 Chandra ACIS-S observations to capture its variable and transient X-ray source population, which is expected to be dominated by High Mass X-ray Binaries (HMXBs). We present a sample of 21 X-ray sources that are variable between observations at the 3 σ level, from a catalog of 110 unique point sources. We find four transients (flux variability ratio greater than 10) and a further eight objects with ratios >5. The observations span the years 2003–2010 and reach a limiting luminosity of >10{sup 35} erg s{sup −1}, providingmore » sensitivity to X-ray binaries in IC 10 as well as flare stars in the foreground Milky Way. The nature of the variable sources is investigated from light curves, X-ray spectra, energy quantiles, and optical counterparts. The purpose of this study is to discover the composition of the X-ray binary population in a young starburst environment. IC 10 provides a sharp contrast in stellar population age (<10 My) when compared to the Magellanic Clouds (40–200 My) where most of the known HMXBs reside. We find 10 strong HMXB candidates, 2 probable background Active Galactic Nuclei, 4 foreground flare-stars or active binaries, and 5 not yet classifiable sources. Complete classification of the sample requires optical spectroscopy for radial velocity analysis and deeper X-ray observations to obtain higher S/N spectra and search for pulsations. A catalog and supporting data set are provided.« less

Hyper-X Mach 10 Trajectory Reconstruction

NASA Technical Reports Server (NTRS)

Karlgaard, Christopher D.; Martin, John G.; Tartabini, Paul V.; Thornblom, Mark N.

2005-01-01

This paper discusses the formulation and development of a trajectory reconstruction tool for the NASA X-43A/Hyper-X high speed research vehicle, and its implementation for the reconstruction and analysis of flight test data. Extended Kalman filtering techniques are employed to reconstruct the trajectory of the vehicle, based upon numerical integration of inertial measurement data along with redundant measurements of the vehicle state. The equations of motion are formulated in order to include the effects of several systematic error sources, whose values may also be estimated by the filtering routines. Additionally, smoothing algorithms have been implemented in which the final value of the state (or an augmented state that includes other systematic error parameters to be estimated) and covariance are propagated back to the initial time to generate the best-estimated trajectory, based upon all available data. The methods are applied to the problem of reconstructing the trajectory of the Hyper-X vehicle from data obtained during the Mach 10 test flight, which occurred on November 16th 2004.

50 CFR 660.65 - Groundfish harvest specifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Groundfish harvest specifications. 660.65 Section 660.65 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OFF WEST COAST STATES West Coast...

1972 Oregon timber harvest.

Treesearch

J.D. Jr. Lloyd

1973-01-01

The 1972 Oregon timber harvest of 9.6 billion board feet was 602 million board feet (6.7 percent) above the 1971 harvest. Western Oregon's harvest rose 8 percent and eastern Oregon's harvest rose 2 percent.

Design and fabrication of a PZT cantilever for low frequency vibration energy harvesting.

PubMed

Kim, Moonkeun; Hwang, Beomseok; Min, Nam Ki; Jeong, Jaehwa; Kwon, Kwang-Ho; Park, Kang-Bak

2011-07-01

In this study, a PZT cantilever with a Si proof mass is designed and fabricated for a low frequency energy harvesting application. A mathematical model of a multi-layer composite beam was derived and applied in a parametric analysis of the piezoelectric cantilever. Finally, the dimensions of the cantilever were determined for the resonant frequency of the cantilever. Our cantilever design was based on MATLAB and ANSYS simulations. For this simulation, the proof mass volumes were varied from 0 to 0.5 mm3 and resonant frequencies were calculated from 833.5 Hz to 125.5 Hz, respectively. Based on simulation, we fabricated a device with beam dimensions of about 4.10 mm x 0.48 mm x 0.012 mm, and an integrated Si proof mass with dimensions of about 0.481 mm x 0.48 mm x 0.45 mm. The resonant frequency, maximum peak voltage, and highest average power of the cantilever device were 224.8 Hz, 4.8 mV, and 2.24 nW, respectively.

Platinum Alloy Tailored All-Weather Solar Cells for Energy Harvesting from Sun and Rain.

PubMed

Tang, Qunwei; Duan, Yanyan; He, Benlin; Chen, Haiyan

2016-11-07

Solar cells that can harvest energy in all weathers are promising in solving the energy crisis and environmental problems. The power outputs are nearly zero under dark conditions for state-of-the-art solar cells. To address this issue, we present herein a class of platinum alloy (PtM x , M=Ni, Fe, Co, Cu, Mo) tailored all-weather solar cells that can harvest energy from rain and realize photoelectric conversion under sun illumination. By tuning the stoichiometric Pt/M ratio and M species, the optimized solar cell yields a photoelectric conversion efficiency of 10.38 % under simulated sunlight irradiation (AM 1.5, 100 mW cm -2 ) as well as current of 3.90 μA and voltage of 115.52 μV under simulated raindrops. Moreover, the electric signals are highly dependent on the dripping velocity and the concentration of simulated raindrops along with concentrations of cation and anion. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1969 original architectural drawing, for 1969 addition, located at Building No. 458, NAS Pensacola, Florida) ARCHITECTURAL FIRST FLOOR PLAN FOR ADDITION TO BUILDING NO. 604 FOR A CONSOLIDATED PLATING FACILITY, SHEET 4 OF 135. - U.S. Naval Air Station, Assembly & Repair Shop, East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1969 original architectural drawing, for 1969 addition, located at Building No. 458, NAS Pensacola, Florida) ARCHITECTURAL SECOND FLOOR PLAN FOR ADDITION TO BUILDING NO. 604 FOR A CONSOLIDATED PLATING FACILITY, SHEET 5 OF 135. - U.S. Naval Air Station, Assembly & Repair Shop, East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1989 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Renovation and revised office layout, Building No. 45, third floor, architectural floor plans, details and schedules, Sheet 1 of 3 - U.S. Naval Air Station, Equipment Shops & Offices, 206 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" copy of an 8" x 10" negative; 1963 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) QUARTERS 5, NEW ELECTRIC SERVICE, NEW MAIN DISTRIBUTION PANEL AND NEW RISER DIAGRAM, ELECTRICAL PLAN, SHEET 1 OF 1 - U.S. Naval Air Station, Senior Officers' Quarters, Q-5 North Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8' x 10' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8' x 10' copy of an 8' x 10' negative; 1952 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Conversion of Building No. 18 for overhaul and repair department electronics shop, existing first and second floor plan, sheet 9 of 21 - U.S. Naval Air Station, Marine Barracks, 232 East Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is an 8' x 10' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8' x 10' copy of an 8' x 10' negative; 1952 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Conversion of Building No. 18 for overhaul and repair department electronics shop. first and second floor plan sheet 1 of 21 - U.S. Naval Air Station, Marine Barracks, 232 East Avenue, Pensacola, Escambia County, FL

Self-tuning stochastic resonance energy harvester for smart tires

NASA Astrophysics Data System (ADS)

Kim, Hongjip; Tai, Wei Che; Zuo, Lei

2018-03-01

Energy harvesting from smart tire has been an influential topic for researchers over several years. In this paper, we propose novel energy harvester for smart tire taking advantage of adaptive tuning stochastic resonance. Compared to previous tire energy harvesters, it can generate large power and has wide bandwidth. Large power is achieved by stochastic resonance while wide-bandwidth is accomplished by adaptive tuning via centrifugal stiffening effect. Energy harvesting configuration for modulated noise is described first. It is an electromagnetic energy harvester consists of rotating beam subject to centrifugal buckling. Equation of motion for energy harvester is derived to investigate the effect of centrifugal stiffening. Numerical analysis was conducted to simulate response. The result show that high power is achieved with wide bandwidth. To verify the theoretical and simulation results, the experiment was conducted. Equivalent horizontal rotating platform is built to mimic tire environment. Experiment results showed good agreement with the numerical result with around 10% of errors, which verified feasibility of proposed harvester. Maximum power 1.8mW is achieved from 3:1 scale experiment setup. The equivalent working range of harvester is around 60-105 km/h which is typical speed for car in general road and highway.

Photoinduced Electronic Energy Transfer: Theoretical and Experimental Issues for Light Harvesting Applications

DTIC Science & Technology

2013-10-21

PHOTOINDUCED ELECTRONIC ENERGY TRANSFER - THEORETICAL AND EXPERIMENTAL ISSUES FOR LIGHT HARVESTING APPLICATIONS PAUL BRUMER UNIV OF TORONTO 10/21... Applications 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA9550-10-1-0260 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...Harvesting Applications Grant Number: FA9550-10-1-0260 Program Manager: Dr. Tatjana Curcic, AFOSR Stated aims of the project

Veg-01 Plant Harvest

NASA Image and Video Library

2015-08-10

ISS044E045825 (08/11/2015) --- NASA astronauts Scott Kelly and Kjell Lindgren on the International Space Station are getting their taste buds ready for the first taste of food that's grown, harvested and eaten in space, a critical step on the path to Mars. The crew took their first bites on Aug. 10, 2015.

1975 Oregon timber harvest.

Treesearch

J.D. Jr. Lloyd

1976-01-01

The 1975 Oregon timber harvest declined to its lowest level since 1961 with a harvest of 7.37 billion board feet, 991 million board feet (11.9 percent) below the 1974 harvest. The harvest was down in both western Oregon (823 million board feet, 13.2 percent) and eastern Oregon (168 million board feet, 7.7 percent). For the first time since 1961, the harvest on private...

Harvest prediction in `Algerie' loquat

NASA Astrophysics Data System (ADS)

Hueso, Juan J.; Pérez, Mercedes; Alonso, Francisca; Cuevas, Julián

2007-05-01

Plant phenology is in great measure driven by air temperature. To forecast harvest time for ‘Algerie’ loquat accurately, the growing degree days (GDD) needed from bloom to ripening were determined using data from nine seasons. The methods proposed by Zalom et al. (Zalom FG, Goodell PB, Wilson LT, Barnett WW, Bentley W, Degree-days: the calculation and use of heat units in pest management, leaflet no 21373, Division Agriculture and Natural Resources, University of California 10 pp, 1983) were compared as regards their ability to estimate heat summation based on hourly records. All the methods gave remarkably similar results for our cultivation area, although the double-sine method showed higher performance when temperatures were low. A base temperature of 3°C is proposed for ‘Algerie’ loquat because it provides a coefficient of variation in GDD among seasons of below 5%, and because of its compatibility with loquat growth. Based on these determinations, ‘Algerie’ loquat requires 1,715 GDD from bloom to harvest; under our conditions this heat is accumulated over an average of 159 days. Our procedure permits the ‘Algerie’ harvest date to be estimated with a mean error of 4.4 days (<3% for the bloom-harvest period). GDD summation did not prove superior to the use of the number of calendar days for predicting ‘Algerie’ harvest under non-limiting growing conditions. However, GDD reflects the developmental rate in water-stressed trees better than calendar days. Trees under deficit irrigation during flower development required more time and more heat to ripen their fruits.

Harvest prediction in 'Algerie' loquat.

PubMed

Hueso, Juan J; Pérez, Mercedes; Alonso, Francisca; Cuevas, Julián

2007-05-01

Plant phenology is in great measure driven by air temperature. To forecast harvest time for 'Algerie' loquat accurately, the growing degree days (GDD) needed from bloom to ripening were determined using data from nine seasons. The methods proposed by Zalom et al. (Zalom FG, Goodell PB, Wilson LT, Barnett WW, Bentley W, Degree-days: the calculation and use of heat units in pest management, leaflet no 21373, Division Agriculture and Natural Resources, University of California 10 pp, 1983) were compared as regards their ability to estimate heat summation based on hourly records. All the methods gave remarkably similar results for our cultivation area, although the double-sine method showed higher performance when temperatures were low. A base temperature of 3 degrees C is proposed for 'Algerie' loquat because it provides a coefficient of variation in GDD among seasons of below 5%, and because of its compatibility with loquat growth. Based on these determinations, 'Algerie' loquat requires 1,715 GDD from bloom to harvest; under our conditions this heat is accumulated over an average of 159 days. Our procedure permits the 'Algerie' harvest date to be estimated with a mean error of 4.4 days (<3% for the bloom-harvest period). GDD summation did not prove superior to the use of the number of calendar days for predicting 'Algerie' harvest under non-limiting growing conditions. However, GDD reflects the developmental rate in water-stressed trees better than calendar days. Trees under deficit irrigation during flower development required more time and more heat to ripen their fruits.

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 4, 1935 PHOTOGRAPH NO. 152 OF CONTRACT NO. 4 SHOWING COMPLETED HIGHWAY. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

Post-harvest physiology

USDA-ARS?s Scientific Manuscript database

Weather and management constraints, as well as the intended use of the harvested forage, all influence the forage harvest system selected by the producer. Generally, maximum retention of dry matter from harvested forage crops is achieved at moistures intermediate between the standing fresh crop and ...

Quality and Quantity of Sorghum Hydroponic Fodder from Different Varieties and Harvest Time

NASA Astrophysics Data System (ADS)

Chrisdiana, R.

2018-02-01

This experiment was designed to compare different varieties and harvest time of sorghum hydroponic fodder based on nutrient content and biomass production. Experimental design for fodder productivity was completely randomized design with 2 x 3 factorial, i.e., sorghum varieties (KD 4 and Super-1) and time of harvesting the sorghum hydroponic fodder (8,12 and 16 d). Total biomass and DM production, were affected significantly (p<0.05) on harvest time. Total biomass and nutrient content were increased in longer harvest time. The nutrient content were increased with decreasing total value of DM. Super-1 varieties produce larger biomass and nutrient content higher than KD4 (p<0.05). Based on sorghum hidroponic fodder quality and quantity, sorghum hidroponic fodder with Super-1 varieties harvested at 12 d had a good quality of fodder and it can be alternative of technology providing quality forage and land saving with a short time planting period and continous production.

Broadband pendulum energy harvester

NASA Astrophysics Data System (ADS)

Liang, Changwei; Wu, You; Zuo, Lei

2016-09-01

A novel electromagnetic pendulum energy harvester with mechanical motion rectifier (MMR) is proposed and investigated in this paper. MMR is a mechanism which rectifies the bidirectional swing motion of the pendulum into unidirectional rotation of the generator by using two one-way clutches in the gear system. In this paper, two prototypes of pendulum energy harvester with MMR and without MMR are designed and fabricated. The dynamic model of the proposed MMR pendulum energy harvester is established by considering the engagement and disengagement of the one way clutches. The simulation results show that the proposed MMR pendulum energy harvester has a larger output power at high frequencies comparing with non-MMR pendulum energy harvester which benefits from the disengagement of one-way clutch during pendulum vibration. Moreover, the proposed MMR pendulum energy harvester is broadband compare with non-MMR pendulum energy harvester, especially when the equivalent inertia is large. An experiment is also conducted to compare the energy harvesting performance of these two prototypes. A flywheel is attached at the end of the generator to make the disengagement more significant. The experiment results also verify that MMR pendulum energy harvester is broadband and has a larger output power at high frequency over the non-MMR pendulum energy harvester.

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MAY 20, 1933 PHOTOGRAPH NO. 12 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE FALSEWORK MATERIAL READY FOR USE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MAY 26, 1933 PHOTOGRAPH NO. 13 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE DRIVING SHEET PILING AT PIER V. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. APRIL 3, 1933 PHOTOGRAPH NO. 6 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE WILLOW TREE MATTRESS FOR PIER NO. 1. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MAY 12, 1933 PHOTOGRAPH NO. 11 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE FALSEWORK AT PIER V. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. AUGUST 21, 1933 PHOTOGRAPH NO. 25 OF CONTRACT NO. 3 SHOWING ERECTION OF STEEL SHELL AT RIVER PIER III. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. APRIL 7, 1933 PHOTOGRAPH NO. 7 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE BORING RIG AT PIER I DOWNSTREAM. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. SEPTEMBER 20, 1933 PHOTOGRAPH NO. 12 OF CONTRACT NO. 6 SHOWING EAST APPROACH – GROUT AROUND RUST JOINT. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MAY 28, 1934 PHOTOGRAPH NO. 162 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE GENERAL VIEW OF PIERS A TO IV. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MAY 28, 1934 PHOTOGRAPH NO. 164 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PIER A COMPLETE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 28, 1934 PHOTOGRAPH NO. 198 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE GENERAL VIEW OF PIERS. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. DECEMBER 18, 1934 PHOTOGRAPH NO. 181 OF CONTRACT NO. 5 SHOWING WEST APPROACH – GRADING TRAFFIC CIRCLE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5”archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 23, 1934 PHOTOGRAPH NO. 193 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE – CONCRETE PLANT AT PIER IV. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JUNE 30, 1933 PHOTOGRAPH NO. 3 OF CONTRACT NO. 6 SHOWING EAST APPROACH – ERECTING STEELWORK, TOWER NO. 1 AND NO. 2. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 5, 1934 PHOTOGRAPH NO. 43 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE CANTILEVER STRUCTURE ERECTION AT PIER II. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 2, 1933 PHOTOGRAPH NO. 45 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PLACING COFFERDAM AT PIER NO. V. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. SEPTEMBER 25, 1933 PHOTOGRAPH NO. 41 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PLACING SAND ISLAND FILL AT PIER NO. III. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 13, 1933 PHOTOGRAPH NO. 69 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE DREDGING THIRD LIFT OF CAISSON AT PIER III. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 6, 1933 PHOTOGRAPH NO. 68 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PIER II FIRST LIFT OF FORMS. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. AUGUST 12, 1935 PHOTOGRAPH NO. 133 OF CONTRACT NO. 4 SHOWING GENERAL VIEW OF EAST APPROACH TO BRIDGE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 7, 1935 PHOTOGRAPH NO. 145 OF CONTRACT NO. 4 SHOWING ERECTION OF 330 FOOT DECK SPAN. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. AUGUST 28, 1933 PHOTOGRAPH NO. 37 OF CONTRACT NO. 5 SHOWING EAST APPROACH – PLACING CONCRETE AT BENT NO. 108. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4 x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 13, 1933 PHOTOGRAPH NO. 72 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PIER II SECOND LIFT OF FORMS. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 22, 1934 PHOTOGRAPH NO. 41 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE STEEL ERECTION AT PIER II. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 28, 1934 PHOTOGRAPH NO. 199 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE GENERAL VIEW OF PIERS. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. APRIL 30, 1934 PHOTOGRAPH NO. 151 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE CONCRETING SHAFT AT PIER III. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 11, 1933 PHOTOGRAPH NO. 49 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE CONSTRUCTION OF FOOTING AT PIER C. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. AUGUST 21, 1933 PHOTOGRAPH NO. 32 OF CONTRACT NO. 5 SHOWING EAST APPROACH – CONCRETING AT BENT NO. 105. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 6, 1933 PHOTOGRAPH NO. 67 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE SHAFT PIER C. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 23, 1933 PHOTOGRAPH NO. 88 OF CONTRACT NO. 5 SHOWING WEST APPROACH – CONCRETING PEDESTAL BENT NO. 9. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 26, 1933 PHOTOGRAPH NO. 78 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE SETTING GRANITE ON PIER V. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JUNE 30, 1933 PHOTOGRAPH NO. 25 OF CONTRACT NO. 5 SHOWING EAST APPROACH – EXCAVATION, BENT 41 AT JEFFERSON HIGHWAY. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JANUARY 8, 1934 PHOTOGRAPH NO. 97 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PIER C COMPLETED. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MARCH 12, 1934 PHOTOGRAPH NO. 130 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE DRIVING FALSEWORK PILES AT PIER IV. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. SEPTEMBER 5, 1933 PHOTOGRAPH NO. 31 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE ERECTION OF SHELL. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MARCH 19, 1934 PHOTOGRAPH NO. 134 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE ERECTING FORMS PIER D. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” X 5”inch archival negative made from print. Original photographer unknown. Original 8” X 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 4, 1935 PHOTOGRAPH NO. 151 OF CONTRACT NO. 4 SHOWING PORTAL OF MAIN CANTILEVER BRIDGE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JANUARY 28, 1935 PHOTOGRAPH NO. 70 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE DISMANTLING FASLEWORK BENT AT LA 8 EAST ANCHOR ARM. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 23, 1933 PHOTOGRAPH NO. 93 OF CONTRACT NO. 5 SHOWING EAST APPROACH – HIGHWAY FILL. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. SEPTEMBER 25, 1933 PHOTOGRAPH NO. 42 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE REMOVAL OF FORMS AT CAISSON PIER NO. V. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 14, 1933 PHOTOGRAPH NO. 82 OF CONTRACT NO. 5 SHOWING EAST APPROACH – HIGHWAY EMBANKMENT. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. FEBRUARY 5, 1934 PHOTOGRAPH NO. 112 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE SETTING CUTTING EDGE AT PIER I. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JUNE 16, 1933 PHOTOGRAPH NO. 22 OF CONTRACT NO. 5 SHOWING EAST APPROACH – CONCRETE PLANT AT BENT NO. 28. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 20, 1933 PHOTOGRAPH NO. 73 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE TOP OF CAISSON AT ELEVATION -35.O FEET. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 15, 1934 PHOTOGRAPH NO. 192 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE TOPPING OUT AT PIER I. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. AUGUST 12, 1935 PHOTOGRAPH NO. 135 OF CONTRACT NO. 4 SHOWING RAILROAD DECK WEST ANCHOR ARM. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 23, 1933 PHOTOGRAPH NO. 59 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PLACING OF CUTTING EDGE AT PIER A. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. DECEMBER 4, 1933 PHOTOGRAPH NO. 80 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE CONCRETING SHAFT AT PIER C. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 29, 1934 PHOTOGRAPH NO. 194 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE ERECTING SHAFT FORMS AT PIER IV. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. AUGUST 26, 1935 PHOTOGRAPH NO. 139 OF CONTRACT NO. 4 SHOWING RAILROAD DECK BETWEEN PIERS D TO V. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MAY 15, 1934 PHOTOGRAPH NO. 156 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE SHAFT FORMS PIER II. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MARCH 27, 1934 PHOTOGRAPH NO. 4 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE START OF PLACING ERECTING DERRICK SPAN V-B. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 20, 1933 PHOTOGRAPH NO. 75 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE SETTING FORMS FOR SHAFT PIER C. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MAY 15, 1934 PHOTOGRAPH NO. 8 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE SPAN BETWEEN PIERS V AND B. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. FEBRUARY 19, 1934 PHOTOGRAPH NO. 118 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE CUTTING EDGE FORMS AT PIER I. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JULY 27, 1934 PHOTOGRAPH NO. 171 OF CONTRACT NO. 5 SHOWING WEST APPROACH – PLACING HIGHWAY FILL. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. FEBRUARY 26, 1934 PHOTOGRAPH NO. 124 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE ERECTING FORMS AT PIER SHAFT PIER A. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 30, 1933 PHOTOGRAPH NO. 62 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE DRIVING SHEET PILING AT PIER B. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 17, 1933 PHOTOGRAPH NO. 57A OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PLACING OF SAND FILL AT PIER NO. II. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 23, 1933 PHOTOGRAPH NO. 58 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PLACING OF CUTTING EDGE AT PIER NO. II. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 2, 1933 PHOTOGRAPH NO. 55 OF CONTRACT NO. 5 SHOWING WEST APPROACH – PILE DRIVER AT BENT NO. 24. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JUNE 18, 1934 PHOTOGRAPH NO. 170 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PIER III COMPLETE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. DECEMBER 26, 1933 PHOTOGRAPH NO. 91 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE EXCAVATING AROUND PILES, PIER D. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JULY 27, 1934 PHOTOGRAPH NO. 170 OF CONTRACT NO. 5 SHOWING WEST APPROACH – PLACING FILL AT HIGHWAY ABUTMENT. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. DECEMBER 11, 1933 PHOTOGRAPH NO. 83 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE COPING FORMS AT PIER C. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. DECEMBER 4, 1934 PHOTOGRAPH NO. 50 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE ERECTING FALSEWORK BENT WEST ANCHOR ARM. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JANUARY 20, 1933 PHOTOGRAPH NO. 1 OF CONTRACT NO. 5 SHOWING EAST APPROACH – FIRST TEST PILE – FOOTING 3 RIGHT. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. DECEMBER 4, 1933 PHOTOGRAPH NO. 81 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE EXCAVATING PIER B. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. AUGUST 6, 1934 PHOTOGRAPH NO. 26 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE ERECTING HIGHWAY STEEL SPAN BETWEEN PIERS B AND C. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. DECEMBER 18, 1933 PHOTOGRAPH NO. 87 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE SAND ISLAND FILL PIER I. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JANUARY 15, 1934 PHOTOGRAPH NO. 102 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE BUILDING COFFERDAM AT PIER A. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. AUGUST 28, 1933 PHOTOGRAPH NO. 29 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PLACING OF WELL FORMS AT PIER NO. IV. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. OCTOBER 30, 1933 PHOTOGRAPH NO. 62 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE DRIVING SHEET PILING AT PIER A. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JULY 16, 1934 PHOTOGRAPH NO. 179 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE DREDGING PIER IV. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. AUGUST 6, 1934 PHOTOGRAPH NO. 27 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE FALSEWORK BEND AND DERRICK AT PIER II. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. APRIL 15, 1935 PHOTOGRAPH NO. 92 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE GENERAL VIEW OF BRIDGE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. SEPTEMBER 24, 1934 PHOTOGRAPH NO. 189 OF CONTRACT NO. 3 SHOWING MAIN SETTING GRANITE AT PIER IV. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JUNE 25, 1934 PHOTOGRAPH NO. 172 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE CONCRETING COPING PIER II. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JANUARY 7, 1935 PHOTOGRAPH NO. 64 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE STEEL ERECTION PIER I. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JANUARY 22, 1934 PHOTOGRAPH NO. 107 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE ERECTING COFFERDAM AT PIER III. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. FEBRUARY 5, 1934 PHOTOGRAPH NO. 114 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PIER NO. V. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JULY 1, 1935 PHOTOGRAPH NO. 116 OF CONTRACT NO. 4 SHOWING RAILROAD DECK WEST ANCHOR ARM. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. APRIL 30, 1934 PHOTOGRAPH NO. 150 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE PIER D COMPLETE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MARCH 11, 1935 PHOTOGRAPH NO. 83A OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE GENERAL VIEW OF BRIDGE. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. FEBRUARY 12, 1934 PHOTOGRAPH NO. 116 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE SETTING SHAFT FORM AT PIER III. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JANUARY 22, 1934 PHOTOGRAPH NO. 106 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE ERECTING COPING FORMS AT PIER V. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. MARCH 12, 1934 PHOTOGRAPH NO. 152 OF CONTRACT NO. 5 SHOWING WEST APPROACH – CONCRETING FOOTING AT BENT NO. 94. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. DECEMBER 31, 1934 PHOTOGRAPH NO. 61 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE UPSTREAM CONCRETE ROADWAY. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” and white photographic print made from original ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” and white photographic print made from original 1935, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JANUARY 28, 1935 PHOTOGRAPH NO. 72 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE COMPLETED HIGHWAY SLAB BETWEEN PIERS V TO B. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. DECEMBER 11, 1933 PHOTOGRAPH NO. 85 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE SETTING GRANITE ON RIVER PIER. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

Lattice damage and compositional changes in Xe ion irradiated In{sub x}Ga{sub 1-x}N (x = 0.32−1.0) single crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Limin, E-mail: zhanglm@lzu.edu.cn; Peng, Jinxin; Ai, Wensi

2016-06-28

Lattice disorder and compositional changes in In{sub x}Ga{sub 1-x}N (x = 0.32, 0.47, 0.7, 0.8, and 1.0) films on GaN/Al{sub 2}O{sub 3} substrates, induced by room-temperature irradiation of 5 MeV Xe ions, have been investigated using both Rutherford backscattering spectrometry under ion-channeling conditions and time-of-flight secondary ion mass spectrometry. The results show that for a fluence of 3 × 10{sup 13 }cm{sup −2}, the relative level of lattice disorder in In{sub x}Ga{sub 1-x}N increases monotonically from 59% to 90% with increasing indium concentration x from 0.32 to 0.7; a further increase in x up to 1.0 leads to little increase in the disorder level. In contrastmore » to Ga-rich In{sub x}Ga{sub 1-x}N (x = 0.32 and 0.47), significant volume swelling of up to ∼25% accompanied with oxidation in In-rich In{sub x}Ga{sub 1-x}N (x = 0.7, 0.8, and 1.0) is observed. In addition, irradiation-induced atomic mixing occurs at the interface of In-rich In{sub x}Ga{sub 1-x}N and GaN. The results from this study indicate an extreme susceptibility of the high In-content In{sub x}Ga{sub 1-x}N to heavy-ion irradiation, and suggest that cautions must be exercised in applying ion-implantation techniques to these materials at room temperature. Further studies of the irradiation behavior at elevated temperatures are warranted.« less

Photocopy of drawing (this photograph is and 8' x10' copy ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is and 8' x10' copy of an 8' x 10' negative; 1907 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Central power station building No. 47, General arrangement of machinery - U.S. Naval Air Station, Power Plant, 328 South Avenue, Pensacola, Escambia County, FL

Gamma rays of energy or = 10(15) eV from Cyg X-3

NASA Technical Reports Server (NTRS)

Kifune, T.; Nishijima, K.; Hara, T.; Hatano, Y.; Hayashida, N.; Honda, M.; Kamata, K.; Matsubara, Y.; Mori, M.; Nagano, M.

1985-01-01

The experimental data of extensive air showers observed at Akeno have been analyzed to detect the gamma ray signal from Cyg X-3. After muon poor air showers are selected, the correlation of data acquisition time with 4.8 hours X-ray period is studied, giving the data concentration near the phase 0.6, the time of X-ray maximum. The probability that uniform backgrounds create the distribution is 0.2%. The time averaged integral gamma ray flux is estimated as (1.1 + or - 0.4)x 10 to the -14th power cm(-2) sec(-1) for Eo 10 to the 15th power eV and (8.8 + or - 5.0)x 10 to the 14th power cm(-2) sec(-1) for Eo 6 x 10 to the 14th power eV.

Airflow energy harvesting with high wind velocities for industrial applications

NASA Astrophysics Data System (ADS)

Chew, Z. J.; Tuddenham, S. B.; Zhu, M.

2016-11-01

An airflow energy harvester capable of harvesting energy from vortices at high speed is presented in this paper. The airflow energy harvester is implemented using a modified helical Savonius turbine and an electromagnetic generator. A power management module with maximum power point finding capability is used to manage the harvested energy and convert the low voltage magnitude from the generator to a usable level for wireless sensors. The airflow energy harvester is characterized using vortex generated by air hitting a plate in a wind tunnel. By using an aircraft environment with wind speed of 17 m/s as case study, the output power of the airflow energy harvester is measured to be 126 mW. The overall efficiency of the power management module is 45.76 to 61.2%, with maximum power point tracking efficiency of 94.21 to 99.72% for wind speed of 10 to 18 m/s, and has a quiescent current of 790 nA for the maximum power point tracking circuit.

Photocopy of drawing (this photograph is an 8" x 10" ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8" x 10" enlargement from a 4" x 5" negative; November 1993 revision of a November 10, 1973 as-built drawing by F. Marquez, in possession of the Highway System Administration Office of the Puerto Rico Highway and Transportation Authority). BRIDGE OVER HONDO RIVER ROUTE NO. 156 K.M. 28.9, COMERIO, P.R. - Puente Rio Hondo, Spanning Hondo River on PR Road 156, Barrio Rio Hondo, Comerio, Comerio Municipio, PR

A triboelectric wind turbine for small-scale energy harvesting

NASA Astrophysics Data System (ADS)

Perez, Matthias; Boisseau, Sebastien; Geisler, Matthias; Despesse, Ghislain; Reboud, Jean Luc

2016-11-01

This paper deals with a rotational energy harvester including a Horizontal Axis Wind Turbine (HAWT), a cylindrical stator covered by several electrodes, and thin Teflon dielectric membranes hung on the rotor. The sliding contact of the Teflon membranes on the stator provides simultaneously large capacitance variations and a polarization source for the electrostatic converter by exploiting triboelectric phenomena. 1μW has been harvested at 4m/s; 130μW at 10m/s and 550μW at 20m/s with a 40mmØ device. In order to validate the energy harvesting chain, the airflow energy harvester has been connected to a power management circuit implementing Synchronous Electric Charge Extraction (SECE) to supply a wireless sensor node with temperature and acceleration measurements, transmitted to a computer at 868MHz.

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. FEBRUARY 24, 1933 PHOTOGRAPH NO. 1 OF CONTRACT NO. 3 SHOWING MAIN BRIDGE CONSTRUCTION TRESTLE ON EAST BANK LOOKING SOUTHEAST TOWARD WEST BANK. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1933, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. JULY 28, 1933 PHOTOGRAPH NO. 21 OF CONTRACT NO. 3 SHOWING PROGRESS OF WORK AT PIER C AS OF JULY 15, 1933 ON EAST BANK. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. APRIL 23, 1934 PHOTOGRAPH NO. 8 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE FALSEWORK BENT THAT WAS SCOURED OUT BETWEEN PIER IV AND V. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

8” x 10” black and white photographic print made from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8” x 10” black and white photographic print made from original 1934, 8” x 10” black and white photographic negative. New 4” x 5” archival negative made from print. Original photographer unknown. Original 8” x 10” negative located in the files of the New Orleans Public Belt Railroad administrative offices at 5100 Jefferson Highway, Jefferson, LA 70123. NOVEMBER 5, 1934 PHOTOGRAPH NO. 44 OF CONTRACT NO. 4 SHOWING BRIDGE SUPERSTRUCTURE ERECTING HIGHWAY FORMS UPSTREAM ROADWAY BETWEEN PIERS V TO D. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

Photocopy of drawing (this photograph is and 8' x10' copy ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is and 8' x10' copy of an 8' x 10' negative; 1993 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Repair chimney, building No. 47, architectural elevations, exterior plan, details, genera notes, sheet 2 of 3 - U.S. Naval Air Station, Power Plant, 328 South Avenue, Pensacola, Escambia County, FL

Photocopy of drawing (this photograph is and 8' x10' copy ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is and 8' x10' copy of an 8' x 10' negative; 1907 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Plan showing floor for basement and support for machinery foundations, central power house building No. 47 - U.S. Naval Air Station, Power Plant, 328 South Avenue, Pensacola, Escambia County, FL

Application of the OCRA Method in the sugar cane harvest and its repercussion on the workers' health. Preliminary study.

PubMed

Ruddy, Facci; Eduardo, Marcatto; Edoardo, Santino

2012-01-01

In Brazil the sugar ethanol industry has had strong growth in the last 10 years, sometimes due to the growing sugar exportation, sometimes due to the alcohol production for automobile fuel and for exportation. Despite the growing mechanization of the raw material harvest (sugar cane), the manual work still persists. The development of this article was based in the application of the OCRA Method in the sugar cane harvesting process, to evaluate the risks to the upper limbs by repetitive movements and epidemiologically prove the ratio risk x harm to the heath of the workers, as well as the probability of developing improvements in the working conditions. The analysis process consists of studying the work organization, the risks to the health of the worker and the distribution of the recovery periods during the working day.

Energy Harvesting & Recapture from Human Subjects: Dual-Stage MEMS Cantilever Energy Harvester

DTIC Science & Technology

2015-03-01

15 Figure 5. (a) In-plane overlap-varying capacitive harvester, (b) In-plane gap-closing capacitive harvester, (c) Out -of-plane gap-closing...capacitive harvester, (c) Out -of-plane gap-closing capacitive harvester [1] The two-way arrows in each subpart of Figure 5 indicate the shuttle’s direction...are compatible with other wafer -based technologies. Bismuth Telluride (Bi2Te3), a common Seebeck thermoelectric material, is able to be processed

SpaceX CRS-10 "What's On Board" Science Briefing

NASA Image and Video Library

2017-02-17

Mike Cisewski, Stratospheric Aerosol and Gas Experiment (SAGE) III Project manager at NASA’s Langley Research Center in Hampton, Virginia, speaks to members of social media in the Kennedy Space Center’s Press Site auditorium. The briefing focused on instruments to be delivered to the International Space Station on the SpaceX CRS-10 mission. Cisewski explained that the SAGE III is designed to study ozone in the atmosphere. A Dragon spacecraft is scheduled to be launched from Kennedy’s Launch Complex 39A on Feb. 18 atop a SpaceX Falcon 9 rocket on the company's 10th Commercial Resupply Services mission to the space station.

SpaceX CRS-10 "What's On Board" Science Briefing

NASA Image and Video Library

2017-02-17

Dr. Richard Blakeslee of NASA’s Marshall Space Flight Center in Huntsville, Alabama, speaks to members of social media in the Kennedy Space Center’s Press Site auditorium. The briefing focused on instruments to be delivered to the International Space Station on the SpaceX CRS-10 mission. Blakeslee explained that the Lightning Imaging Sensor (LIS) is designed to measure the amount, rate and energy of lightning around the world. A Dragon spacecraft is scheduled to be launched from Kennedy’s Launch Complex 39A on Feb. 18 atop a SpaceX Falcon 9 rocket on the company's 10th Commercial Resupply Services mission to the space station.

Phonons of Fe-based superconductor Ca 10Pt 4As 8(Fe 1-xPt xAs) 10

DOE PAGES

Ikeuchi, K.; Kobayashi, Y.; Suzuki, K.; ...

2015-10-28

In this paper, we report the results of inelastic neutron scattering measurements on particular phonons of a superconducting (SC) Ca10Pt 4As 8(Fe 1-xPt xAs) 10 with the onset transition temperature T c ~ 33 K to investigate mainly what roles orbital fluctuation plays in Cooper pairing, where we observed a slight softening of the in-plane transverse acoustic mode corresponding to the elastic constant C 66. This softening starts at temperature T well above the superconducting T c, as T decreases. An anomalously strong change of the scattering intensity of in-plane optical modes was observed at the M point of themore » pseudo tetragonal reciprocal space in the range of 35 < ω < 40 meV with decreasing T from far above T c. Finally, because this ω region mainly corresponds to the motion of Fe and As atoms in the FeAs planes, the finding presents information on the coupling between the orbital fluctuation of Fe 3d electrons and the lattice system, useful for studying the possible roles of orbital fluctuation in the pairing mechanism and/or the appearance of the so-called nematic phase.« less

Photocopy of drawing (this photograph is and 8' x10' copy ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is and 8' x10' copy of an 8' x 10' negative; 1939 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Central power plant, installation of turbo-alternator and air compressor, plan above basement, sheet 1 of 6 - U.S. Naval Air Station, Power Plant, 328 South Avenue, Pensacola, Escambia County, FL

SpaceX CRS-10 Prelaunch News Conference

NASA Image and Video Library

2017-02-17

In the Kennedy Space Center’s Press Site auditorium, agency and industry leaders speak to members of the media at a prelaunch news conference for the SpaceX CRS-10 commercial resupply services mission to the International Space Station. Tara Ruttley, associate scientist for the International Space Station Program at Johnson Space Center in Houston, answers questions.

SpaceX CRS-10 Prelaunch News Conference

NASA Image and Video Library

2017-02-17

In the Kennedy Space Center’s Press Site auditorium, agency and industry leaders speak to members of the media at a prelaunch news conference for the SpaceX CRS-10 commercial resupply services mission to the International Space Station. Tara Ruttley, associate scientist for the International Space Station Program at Johnson Space Center in Houston answers questions.

Verification of sex from harvested sea otters using DNA testing

USGS Publications Warehouse

Scribner, Kim T.; Green, Ben A.; Gorbics, Carol; Bodkin, James L.

2005-01-01

We used molecular genetic methods to determine the sex of 138 sea otters (Enhydra lutris) harvested from 3 regions of Alaska from 1994 to 1997, to assess the accuracy of post‐harvest field‐sexing. We also tested each of a series of factors associated with errors in field‐sexing of sea otters, including male or female bias, age‐class bias, regional bias, and bias associated with hunt characteristics. Blind control results indicated that sex was determined with 100% accuracy using polymerase chain reaction (PCR) amplification using primers that co‐amplify the zinc finger‐Y‐X gene, located on both the mammalian Y‐ and X‐chromosomes, and Testes Determining Factor (TDF), located on the mammalian Y‐chromosome. DNA‐based sexing revealed that 12.3% of the harvested sea otters were incorrectly sexed in the field, with most errors (13 of 17) occurring as males incorrectly reported as females. Thus, female harvest was overestimated. Using logistic regression analysis, we detected no statistical association of incorrect determination of sex in the field with age class, hunt region, or hunt type. The error in field‐sexing appears to be random, at least with respect to the variables evaluated in this study.

The effects of variations in Reynolds number between 3.0 x 10sub6 and 25.0 x 10sub6 upon the aerodynamic characteristics of a number of NACA 6-series airfoil sections

NASA Technical Reports Server (NTRS)

Loftin, Laurence K, Jr; Bursnall, William J

1950-01-01

Results are presented of an investigation made to determine the two-dimensional lift and drag characteristics of nine NACA 6-series airfoil section at Reynolds numbers of 15.0 x 10sub6, 20.0 x 10sub6, and 25.0 x 10sub6. Also presented are data from NACA Technical Report 824 for the same airfoils at Reynolds numbers of 3.0 x 10sub6, 6.0 x 10sub6, and 9.0 x 10sub6. The airfoils selected represent sections having variations in the airfoil thickness, thickness form, and camber. The characteristics of an airfoil with a split flap were determined in one instance, as was the effect of surface roughness. Qualitative explanations in terms of flow behavior are advanced for the observed types of scale effect.

1974 Oregon timber harvest.

Treesearch

J.D. Jr. Lloyd

1976-01-01

The 1974 Oregon timber harvest of 8.36 billion board feet was 9.2 percent, or 0.84 billion board feet, below the 1973 harvest. (The data for 1973 were adjusted to reflect the change in reporting of harvest on Bureau of Land Management lands; see footnote 3 of table.) While the harvest in western Oregon decreased 14.7 percent, eastern Oregon cut increased 11.5 percent...

Analog self-powered harvester achieving switching pause control to increase harvested energy

NASA Astrophysics Data System (ADS)

Makihara, Kanjuro; Asahina, Kei

2017-05-01

In this paper, we propose a self-powered analog controller circuit to increase the efficiency of electrical energy harvesting from vibrational energy using piezoelectric materials. Although the existing synchronized switch harvesting on inductor (SSHI) method is designed to produce efficient harvesting, its switching operation generates a vibration-suppression effect that reduces the harvested levels of electrical energy. To solve this problem, the authors proposed—in a previous paper—a switching method that takes this vibration-suppression effect into account. This method temporarily pauses the switching operation, allowing the recovery of the mechanical displacement and, therefore, of the piezoelectric voltage. In this paper, we propose a self-powered analog circuit to implement this switching control method. Self-powered vibration harvesting is achieved in this study by attaching a newly designed circuit to an existing analog controller for SSHI. This circuit aims to effectively implement the aforementioned new switching control strategy, where switching is paused in some vibration peaks, in order to allow motion recovery and a consequent increase in the harvested energy. Harvesting experiments performed using the proposed circuit reveal that the proposed method can increase the energy stored in the storage capacitor by a factor of 8.5 relative to the conventional SSHI circuit. This proposed technique is useful to increase the harvested energy especially for piezoelectric systems having large coupling factor.

Structural and relaxor-like dielectric properties of unfilled tungsten bronzes Ba5-5xSm5xTi5xNb10-5xO30

NASA Astrophysics Data System (ADS)

Wei, T.; Dong, Z.; Zhao, C. Z.; Guo, Y. Y.; Zhou, Q. J.; Li, Z. P.

2016-03-01

New unfilled tetragonal tungsten bronze (TTB) oxides, Ba5-5xSm5xTi5xNb10-5xO30 (BSTN-x), where 0.10 ≤ x ≤ 0.35, have been synthesized in this work. Their crystal structure was determined and analyzed based on Rietveld structural refinement. It is found that single TTB phase can be formed in a particular x range (i.e., 0.15 ≤ x ≤ 0.3) due to the competition interaction between tolerance factor and electronegativity difference. Furthermore, dielectric and ferroelectric results indicate that phase transitions and ferroelectric states are sensitive to x. Referring to the local chemistry, we suggest that the raise of vacancies at the A2-site compared with that of A1-site will intensely depress the normal ferroelectric phase and is in favor of relaxor ferroelectric state. Macroscopically, previous A-site size difference standpoint on fill TTB compounds cannot give a reasonable explanation about the variation of dielectric maximum temperature (Tm) for present BSTN-x compounds. Alternatively, tetragonality (c/a) is adopted which can well describe the variation of Tm in whole x range. In addition, one by one correspondence between tetragonality and electrical features can be found, and the compositions involving high c/a are usually stabilized in normal ferroelectric phase. It is believed that c/a is a more appropriate parameter to illustrate the variation of ferroelectric properties for unfilled TTB system.

Toward a semi-mechanical harvesting platform system for harvesting blueberries with fresh-market quality

USDA-ARS?s Scientific Manuscript database

Major concerns related to harvesting blueberries for fresh market with over-the-row (OTR) harvesters are that the quality of the fruit harvested with OTR machines is generally low and ground loss is excessive. Machine-harvested blueberries have more internal bruise and usually soften rapidly in col...

Photocopy of drawing (this photograph is and 8' x10' copy ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is and 8' x10' copy of an 8' x 10' negative; 1940 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Central power plant building No. 47, electrical work, salt water pumps, auxiliary bus and fire pump, plan, details and changes, sheet 1 of 1. - U.S. Naval Air Station, Power Plant, 328 South Avenue, Pensacola, Escambia County, FL

EU mitigation potential of harvested wood products.

PubMed

Pilli, Roberto; Fiorese, Giulia; Grassi, Giacomo

2015-12-01

The new rules for the Land Use, Land Use Change and Forestry sector under the Kyoto Protocol recognized the importance of Harvested Wood Products (HWP) in climate change mitigation. We used the Tier 2 method proposed in the 2013 IPCC KP Supplement to estimate emissions and removals from HWP from 1990 to 2030 in EU-28 countries with three future harvest scenarios (constant historical average, and +/-20% in 2030). For the historical period (2000-2012) our results are consistent with other studies, indicating a HWP sink equal on average to -44.0 Mt CO 2 yr -1 (about 10% of the sink by forest pools). Assuming a constant historical harvest scenario and future distribution of the total harvest among each commodity, the HWP sink decreases to -22.9 Mt CO 2 yr -1 in 2030. The increasing and decreasing harvest scenarios produced a HWP sink of -43.2 and -9.0 Mt CO 2 yr -1 in 2030, respectively. Other factors may play an important role on HWP sink, including: (i) the relative share of different wood products, and (ii) the combined effect of production, import and export on the domestic production of each commodity. Maintaining a constant historical harvest, the HWP sink will slowly tend to saturate, i.e. to approach zero in the long term. The current HWP sink will be maintained only by further increasing the current harvest; however, this will tend to reduce the current sink in forest biomass, at least in the short term. Overall, our results suggest that: (i) there is limited potential for additional HWP sink in the EU; (ii) the HWP mitigation potential should be analyzed in conjunction with other mitigation components (e.g. sink in forest biomass, energy and material substitution by wood).

Bi-stable frequency up-conversion piezoelectric energy harvester driven by non-contact magnetic repulsion

NASA Astrophysics Data System (ADS)

Tang, Q. C.; Yang, Y. L.; Li, Xinxin

2011-12-01

This paper presents miniaturized energy harvesters, where the frequency up-conversion technique is used to improve the bandwidth of vibration energy harvesters. The proposed and developed miniature piezoelectric energy harvester utilizes magnetic repulsion forces to achieve non-contact frequency up-conversion, thereby avoiding mechanical collision and wear for long-term working durability. A pair of piezoelectric resonant cantilevers is micro-fabricated to generate electric power. A simplified model involving linear oscillators and magnetic interaction is deployed to demonstrate the feasibility of the device design. A bench-top harvester has been fabricated and characterized, resulting in average power generation of over 10 µW within a broad frequency range of 10-22 Hz under 1g acceleration.

Stump Harvesting

Treesearch

Dana Mitchell

2009-01-01

Increased use of forest fuel requires larger and larger procurement areas. Inclusion of stump material within the shorter distances could make this unusual source of biomass more economical to harvest. Land clearing activities are also helping to raise interest in stump harvesting. Processing stump material for biomass is an alternative...

Development of an adaptive harvest management program for Taiga bean geese

USGS Publications Warehouse

Johnson, Fred A.; Alhainen, Mikko; Fox, Anthony D.; Madsen, Jesper

2016-01-01

This report describes recent progress in specifying the elements of an adaptive harvest program for taiga bean goose. It describes harvest levels appropriate for first rebuilding the population of the Central Management Unit and then maintaining it near the goal specified in the AEWA International Single Species Action Plan (ISSAP). This report also provides estimates of the length of time it would take under ideal conditions (no density dependence and no harvest) to rebuild depleted populations in the Western and Eastern Management Units. We emphasize that our estimates are a first approximation because detailed demographic information is lacking for taiga bean geese. Using allometric relationships, we estimated parameters of a thetalogistic matrix population model. The mean intrinsic rate of growth was estimated as r = 0.150 (90% credible interval: 0.120 – 0.182). We estimated the mean form of density dependence as   2.361 (90% credible interval: 0.473 – 11.778), suggesting the strongest density dependence occurs when the population is near its carrying capacity. Based on expert opinion, carrying capacity (i.e., population size expected in the absence of hunting) for the Central Management Unit was estimated as K  87,900 (90% credible interval: 82,000 – 94,100). The ISSAP specifies a population goal for the Central Management Unit of 60,000 – 80,000 individuals in winter; thus, we specified a preliminary objective function as one which would minimize the difference between this goal and population size. Using the concept of stochastic dominance to explicitly account for uncertainty in demography, we determined that optimal harvest rates for 5, 10, 15, and 20-year time horizons were h = 0.00, 0.02, 0.05, and 0.06, respectively. These optima represent a tradeoff between the harvest rate and the time required to achieve and maintain a population size within desired bounds. We recognize, however, that regulation of absolute harvest rather than

Field-induced antiferroelectric to ferroelectric transitions in (Pb 1–xLa x)(Zr 0.90Ti 0.10) 1–x/ 4O 3 investigated by in situ X-ray diffraction

DOE PAGES

Ciuchi, Ioana V.; Chung, Ching -Chang; Fancher, Christopher M.; ...

2017-06-17

Phase transitions and field-induced preferred orientation in (Pb 1-xLa x)(Zr 0.90Ti 0.10) 1–x/ 4O 3 (PLZT x/90/10) ceramics upon electric field cycling using in situ X-ray diffraction were studied. The evolution of the {200} pc and {111} pc diffraction line profiles indicate that PLZT 4/90/10 and PLZT 3/90/10 compositions undergo an antiferroelectric (AFE)–ferroelectric (FE) phase switching. Both PLZT 4/90/10 and PLZT 3/90/10 exhibit irreversible preferred orientation after experiencing the field-induced AFE-to-FE phase switching. An electric field-induced structure develops in both compositions which has a reversible character during the field decreasing in PLZT 4/90/10 and an irreversible character in PLZT 3/90/10.more » In addition, structural analysis of pre-poled PLZT 3/90/10 ceramics show that it is possible to induce consecutive FE-to-AFE and AFE-to-FE transitions when fields of reversed polarity are applied in sequence. The field range required to induce the AFE phase is broad, and the phase transition is kinetically slow. In conclusion, this kind of transition has rarely been reported before.« less

Field-induced antiferroelectric to ferroelectric transitions in (Pb 1–xLa x)(Zr 0.90Ti 0.10) 1–x/ 4O 3 investigated by in situ X-ray diffraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ciuchi, Ioana V.; Chung, Ching -Chang; Fancher, Christopher M.

Phase transitions and field-induced preferred orientation in (Pb 1-xLa x)(Zr 0.90Ti 0.10) 1–x/ 4O 3 (PLZT x/90/10) ceramics upon electric field cycling using in situ X-ray diffraction were studied. The evolution of the {200} pc and {111} pc diffraction line profiles indicate that PLZT 4/90/10 and PLZT 3/90/10 compositions undergo an antiferroelectric (AFE)–ferroelectric (FE) phase switching. Both PLZT 4/90/10 and PLZT 3/90/10 exhibit irreversible preferred orientation after experiencing the field-induced AFE-to-FE phase switching. An electric field-induced structure develops in both compositions which has a reversible character during the field decreasing in PLZT 4/90/10 and an irreversible character in PLZT 3/90/10.more » In addition, structural analysis of pre-poled PLZT 3/90/10 ceramics show that it is possible to induce consecutive FE-to-AFE and AFE-to-FE transitions when fields of reversed polarity are applied in sequence. The field range required to induce the AFE phase is broad, and the phase transition is kinetically slow. In conclusion, this kind of transition has rarely been reported before.« less

Burnt Sugarcane Harvesting – Cardiovascular Effects on a Group of Healthy Workers, Brazil

PubMed Central

Barbosa, Cristiane Maria Galvão; Terra-Filho, Mário; de Albuquerque, André Luis Pereira; Di Giorgi, Dante; Grupi, Cesar; Negrão, Carlos Eduardo; Rondon, Maria Urbana Pinto Brandão; Martinez, Daniel Godoy; Marcourakis, Tânia; dos Santos, Fabiana Almeida; Braga, Alfésio Luís Ferreira; Zanetta, Dirce Maria Trevisan; Santos, Ubiratan de Paula

2012-01-01

Background Brazil is the world's largest producer of sugarcane. Harvest is predominantly manual, exposing workers to health risks: intense physical exertion, heat, pollutants from sugarcane burning. Design Panel study to evaluate the effects of burnt sugarcane harvesting on blood markers and on cardiovascular system. Methods Twenty-eight healthy male workers, living in the countryside of Brazil were submitted to blood markers, blood pressure, heart rate variability, cardiopulmonary exercise testing, sympathetic nerve activity evaluation and forearm blood flow measures (venous occlusion plethysmography) during burnt sugarcane harvesting and four months later while they performed other activities in sugar cane culture. Results Mean participant age was 31±6.3 years, and had worked for 9.8±8.4 years on sugarcane work. Work during the harvest period was associated with higher serum levels of Creatine Kinase – 136.5 U/L (IQR: 108.5–216.0) vs. 104.5 U/L (IQR: 77.5–170.5), (p = 0.001); plasma Malondialdehyde–7.5±1.4 µM/dl vs. 6.9±1.0 µM/dl, (p = 0.058); Glutathione Peroxidase – 55.1±11.8 Ug/Hb vs. 39.5±9.5 Ug/Hb, (p<0.001); Glutathione Transferase– 3.4±1.3 Ug/Hb vs. 3.0±1.3 Ug/Hb, (p = 0.001); and 24-hour systolic blood pressure – 120.1±10.3 mmHg vs. 117.0±10.0 mmHg, (p = 0.034). In cardiopulmonary exercise testing, rest-to-peak diastolic blood pressure increased by 11.12 mmHg and 5.13 mmHg in the harvest and non-harvest period, respectively. A 10 miliseconds reduction in rMSSD and a 10 burst/min increase in sympathetic nerve activity were associated to 2.2 and 1.8 mmHg rises in systolic arterial pressure, respectively. Conclusion Work in burnt sugarcane harvesting was associated with changes in blood markers and higher blood pressure, which may be related to autonomic imbalance. PMID:23029413

Harvest and reporting rates of game-farm ring-necked pheasants

USGS Publications Warehouse

Diefenbach, D.R.; Riegner, C.F.; Hardisky, T.S.

2000-01-01

Many state natural resource agencies release ring-necked pheasants (Phasianus colchicus) for hunting, but the effectiveness of these programs has never been evaluated on a statewide basis. We conducted a reward-band study to estimate harvest, reporting, and survival rates of pheasants raised and released by the Pennsylvania Game Commission (PGC) for the fall 1998 hunting season. We banded 6,770 of 199,613 released pheasants with leg bands worth $0-$400. Rewards >$75 produced 100% reporting rates. Hunters reported 71.0% of harvested pheasants banded with standard bands (no reward). Cocks had an estimated 62.3% harvest rate when released on public land and a 46.8% harvest rate on private land. Hens had an estimated 50.4% harvest rate when released on public land and a 31.1% harvest rate on private land. Estimated harvest rate for hen pheasants released in September in the either-sex zone was 15.5%. In the late season, pheasants released on public land had a 33.6% harvest rate and a 23.5% harvest rate on private land. We found that few pheasants (30 days and birds released on public land had reduced survival rates primarily because of greater harvest rates. In fiscal year 1998-99, the net cost to raise and release 199,613 pheasants was $2,813,138 ($14.09 per bird). The average cost per harvested pheasant was $29.10, but ranged from $22.63 to $90.74 depending on the date and location of release. We estimated that 49.9% (82,017 birds) of pheasants stocked immediately prior to and during the regular and late seasons (excluding September releases of hens) were harvested by hunters. Percentage of pheasants harvested by hunters could be increased by expanding the either-sex zone in Pennsylvania so that more hens could be legally killed by hunters and by allocating releases to seasons and locations with greater harvest rates. However, before such changes are implemented, we recommend a survey of Pennsylvania pheasant hunters to ascertain their opinions and desires regarding

Effects of open-entry spike-bull, limited-entry branched-bull harvesting on elk composition in Washington

USGS Publications Warehouse

Bender, L.C.; Fowler, P.E.; Bernatowicz, J.A.; Musser, J.L.; Stream, L.E.

2002-01-01

The Washington Department of Fish and Wildlife implemented an open-entry spike-bull, limited-entry branched-bull elk (Cervus elaphus) harvest strategy in the Blue Mountains (1989), Yakima (1994), and Colockum (1994) herd areas of Washington state with goals of increasing numbers of adult bulls to increase breeding efficiency and possibly calf recruitment. Numbers of total bulls/100 cows (x??=5.4) and branched bulls/100 cows (x??=5.3) increased with the change in harvest strategy, while yearling bulls/100 cows remained unchanged; calves/100 cows declined (x??=-8.6). Calves/100 cows were always negatively correlated with both total bulls/100 cows and branched bulls/100 cows in each area; correlations were significant in 5 of 9 comparisons with total-bull ratios and 5 of 9 comparisons with branched-bull ratios. Open-entry spike-bull, limited-entry branched-bull harvesting can be used to increase total-bull and branched-bulls ratios in hunted elk populations. However, the increased ratios of bulls and branched bulls were unimportant in influencing calf recruitment, likely because of the importance of female condition on production and survival of young.

Stand, Harvest, and Equipment Interactions in Simulated Harvesting Prescriptions

Treesearch

Jingxin Wang; W. Dale Greene; Bryce J. Stokes

1998-01-01

We evaluated potential interactions of stand type, harvesting method, and equipment in an experiment using interactive simulation. We examined three felling methods (chain saw, feller-buncher, harvester) and two extraction methods (grapple skidder and forwarder) performing clearcuts, sheltenvood cuts, and single-tree selection cuts in both an uneven-aged natural stand...

Structural and magnetic aspects of La4(Co1-xNix)3O10+δ (0 ≤ x ≤ 1)

NASA Astrophysics Data System (ADS)

Nagell, Marius Uv; Kumar, Susmit; Sørby, Magnus H.; Fjellvåg, Helmer; Olafsen Sjåstad, Anja

2015-10-01

The Ruddlesden-Popper (RP3) type oxides, La4Co3O10+δ and La4Ni3O10+δ, form a complete solid solution. Powder X-ray and neutron diffraction data show that La4(Co1-xNix)3O10+δ is isostructural to the monoclinic La4Co3O10+δ structure (P21/a) described for all compositions without any further structural distortions as suggested in the literature. A slight elongation of the Co/Ni-O bonds facing the rock salt interlayer occurs for Ni-rich compositions. The magnetic properties of the solid solution series are mapped in the temperature range from 4 to 300 K, and the results are presented in a magnetic phase diagram. Three regimes with antiferromagnetic order (AF) exist at low temperatures, TN < 10 - 30 K. For x = 0.00, the AF is ascribed to Co(II), whereas a broader AF regime around x = 0.50 is ascribed mainly to Ni(II). Pauli paramagnetism is observed close to metallic La4Ni3O10+δ, x > 0.80. The possibility to tune the oxidation state of the transition metal atoms is demonstrated for La4Co3O10+δ, and exemplified by weakening of a temperature-induced spin transition at around 480 K.

Micro electro-mechanical system piezoelectric cantilever array for a broadband vibration energy harvester.

PubMed

Chun, Inwoo; Lee, Hyun-Woo; Kwon, Kwang-Ho

2014-12-01

Limited energy sources of ubiquitous sensor networks (USNs) such as fuel cells and batteries have grave drawbacks such as the need for replacements and re-charging owing to their short durability and environmental pollution. Energy harvesting which is converting environmental mechanical vibration into electrical energy has been researched with some piezoelectric materials and various cantilever designs to increase the efficiency of energy-harvesting devices. In this study, we focused on an energy-harvesting cantilever with a broadband vibration frequency. We fabricated a lead zirconate titanate (PZT) cantilever array with various Si proof masses on small beams (5.5 mm x 0.5 mm x 0.5 mm). We obtained broadband resonant frequencies ranging between 127 Hz and 136 Hz using a micro electro-mechanical system (MEMS) process. In order to obtain broadband resonant characteristics, the cantilever array was comprised of six cantilevers with different resonant frequencies. We obtained an output power of about 2.461 μW at an acceleration of 0.23 g and a resistance of 4 kΩ. The measured bandwidth of the resonant frequency was approximately 9 Hz (127-136 Hz), which is about six times wider than the bandwidth of a single cantilever.

Waterfowl harvest at Tule Lake National Wildlife Refuge, 1936-41

USGS Publications Warehouse

Gilmer, D.S.; Hicks, J.M.; Bartonek, J.C.; McCollum, E.H.

1986-01-01

Waterfowl harvest at Tule Lake National Wildlife Refuge (NWR) for the 6-yr period 1936-41 is described and compared with a recent (1978-83) period. During the early period 46,987 geese and 76,143 ducks were bagged during 48,610 hunter-visits. Hunting seasons were 30 to 60 d in length. Greater White-fronted Geese Anser albifrons, followed by Northern Pintails Anas acuta, and Cackling Canada Geese Branta canadensis minima were the most important birds in the harvest. Average harvest was 1.0 goose and 1.6 ducks per hunter-visit. A short (30-d) and late hunting season drastically curtailed harvest in 1937. Reduced hunting activity in 1941 was attributed to military mobilization. During the 1978-83 period 34,416 geese and 63,458 ducks were bagged during 69,170 hunter-visits. Hunting seasons during this period were mostly 93 d in length. The most important bird in the harvest was the Mallard A. platyrhynchos, followed by White-fronted Goose and Northern Pintail. Average harvest was 0.5 goose and 0.9 duck per hunter-visit. In general dabbling ducks increased in overall importance while diving ducks decreased between the two periods. Harvest decreased 20.5% while hunter-visits increased 42.3%.

Giant light-harvesting nanoantenna for single-molecule detection in ambient light

PubMed Central

Trofymchuk, Kateryna; Reisch, Andreas; Didier, Pascal; Fras, François; Gilliot, Pierre; Mely, Yves; Klymchenko, Andrey S.

2017-01-01

Here, we explore the enhancement of single molecule emission by polymeric nano-antenna that can harvest energy from thousands of donor dyes to a single acceptor. In this nano-antenna, the cationic dyes are brought together in very close proximity using bulky counterions, thus enabling ultrafast diffusion of excitation energy (≤30 fs) with minimal losses. Our 60-nm nanoparticles containing >10,000 rhodamine-based donor dyes can efficiently transfer energy to 1-2 acceptors resulting in an antenna effect of ~1,000. Therefore, single Cy5-based acceptors become 25-fold brighter than quantum dots QD655. This unprecedented amplification of the acceptor dye emission enables observation of single molecules at illumination powers (1-10 mW cm-2) that are >10,000-fold lower than typically required in single-molecule measurements. Finally, using a basic setup, which includes a 20X air objective and a sCMOS camera, we could detect single Cy5 molecules by simply shining divergent light on the sample at powers equivalent to sunlight. PMID:28983324

X-15A-2 and HL-10 parked on NASA ramp

NASA Technical Reports Server (NTRS)

1966-01-01

Both the HL-10 and X-15A2, shown here parked beside one another on the NASA ramp in 1966, underwent modifications. The X-15 No. 2 had been damaged in a crash landing in November 1962. Subsequently, the fuselage was lengthened, and it was outfitted with two large drop tanks. These modifications allowed the X-15A-2 to reach the speed of Mach 6.7. On the HL-10, the stability problems that appeared on the first flight at the end of 1966 required a reshaping of the fins' leading edges to eliminate the separated airflow that was causing the unstable flight. By cambering the leading edges of the fins, the HL-10 team achieved attached flow and stable flight. The HL-10 was one of five heavyweight lifting-body designs flown at NASA's Flight Research Center (FRC--later Dryden Flight Research Center), Edwards, California, from July 1966 to November 1975 to study and validate the concept of safely maneuvering and landing a low lift-over-drag vehicle designed for reentry from space. Northrop Corporation built the HL-10 and M2-F2, the first two of the fleet of 'heavy' lifting bodies flown by the NASA Flight Research Center. The contract for construction of the HL-10 and the M2-F2 was $1.8 million. 'HL' stands for horizontal landing, and '10' refers to the tenth design studied by engineers at NASA's Langley Research Center, Hampton, Va. After delivery to NASA in January 1966, the HL-10 made its first flight on Dec. 22, 1966, with research pilot Bruce Peterson in the cockpit. Although an XLR-11 rocket engine was installed in the vehicle, the first 11 drop flights from the B-52 launch aircraft were powerless glide flights to assess handling qualities, stability, and control. In the end, the HL-10 was judged to be the best handling of the three original heavy-weight lifting bodies (M2-F2/F3, HL-10, X-24A). The HL-10 was flown 37 times during the lifting body research program and logged the highest altitude and fastest speed in the Lifting Body program. On Feb. 18, 1970, Air Force

INFINITY harvest

NASA Image and Video Library

2012-05-07

Lauren Lombard from Benjamin E. Mays Preparatory School in New Orleans enjoys lettuce she helped to harvest at the INFINITY at NASA Stennis Space Center facility May 7, 2012. The Louisiana students assisted in the first harvest of lettuce from the Controlled Environment Agriculture unit, which uses an aeroponic process that involves no soil and advance LED lighting techniques

Search for gluon saturation at Bjorken-x of 10-6-10-5 with the LHCb detector

NASA Astrophysics Data System (ADS)

da Silva, Cesar; LHCb Collaboration

2017-09-01

Gluon saturation at small Byorken- x has been in the minds of particle and nuclear physicists for decades. This state can explain several recent observations such as 1) particle collectivity observed in p+p, p+A and A+A collisions at RHIC and LHC; and 2) depleted yield of particles coming from soft gluons. Previous results from DIS experiments at HERA show a fast increase of gluons as their fractional momentum x decreases. The LHCb experiment is a forward spectrometer with vertexing, tracking, p, K, pi , e, μ identification and calorimetry in the rapidity region 1.6 < η < 4.9. LHCb is the only experiment in the world which can probe x 10-6 -10-5 , up to two orders of magnitude smaller than HERA. A direct probe of gluons at small-x and small Q2 can be performed with γ+jet correlation measurements. The current detector acceptance is not optimized for soft particles coming from Q2 < 10 [GeV/c]2 processes, where gluon saturation is expected. R&D is underway for a new tracking detector to be placed inside the LHCb magnet, the Magnet Station (MS), which will enable measurements of these soft particles. This talk is going to report the status of the analysis efforts aimed at finding the gluon saturation scale at LHCb, and details of the MS. Los Alamos National Lab LDRD program.

Fog Harvesting with Harps.

PubMed

Shi, Weiwei; Anderson, Mark J; Tulkoff, Joshua B; Kennedy, Brook S; Boreyko, Jonathan B

2018-04-11

Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture microscopic fog droplets, whereas fine meshes suffer from clogging issues. Here, we design and fabricate fog harvesters comprising an array of vertical wires, which we call "fog harps". Under controlled laboratory conditions, the fog-harvesting rates for fog harps with three different wire diameters were compared to conventional meshes of equivalent dimensions. As expected for the mesh structures, the mid-sized wires exhibited the largest fog collection rate, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog-harvesting rate continually increased with decreasing wire diameter for the fog harps due to efficient droplet shedding that prevented clogging. This resulted in a 3-fold enhancement in the fog-harvesting rate for the harp design compared to an equivalent mesh.

1973 Oregon timber harvest.

Treesearch

J.D. Jr. Lloyd

1974-01-01

The 1973 Oregon timber harvest of 9.36 billion board feet was 265 million board feet (2.8 percent) below the 1972 harvest. The greater portion of the decrease occurred in eastern Oregon where timber harvest dropped 9.4 percent compared with 0.9 percent in western Oregon.

A new harvest operation cost model to evaluate forest harvest layout alternatives

Treesearch

Mark M. Clark; Russell D. Meller; Timothy P. McDonald; Chao Chi Ting

1997-01-01

The authors develop a new model for harvest operation costs that can be used to evaluate stands for potential harvest. The model is based on felling, extraction, and access costs, and is unique in its consideration of the interaction between harvest area shapes and access roads. The scientists illustrate the model and evaluate the impact of stand size, volume, and road...

Timber harvest in interior Alaska.

Treesearch

Tricia L. Wurtz; Robert A. Ott; John C. Maisch

2006-01-01

The most active period of timber harvesting in the history of Alaska's interior occurred nearly a century ago (Roessler 1997). The beginning of this era was the year 1869, when steam-powered, stern-wheeled riverboats first operated on the Yukon River (Robe 1943). Gold was discovered in Alaska in the 40-Mile River area in 1886, a find that was overshadowed 10 years...

Harvesting wood for energy.

Treesearch

Rodger A. Arola; Edwin W. Miyata

1981-01-01

Illustrates the potential of harvesting wood for industrial energy, based on the results of five harvesting studies. Presents information on harvesting operations, equipment costs, and productivity. Discusses mechanized thinning of hardwoods, clearcutting of low-value stands and recovery of hardwood tops and limbs. Also includes basic information on the physical and...

Ecological impacts of energy-wood harvests: lessons from whole-tree harvesting and natural disturbance

USGS Publications Warehouse

Berger, Alaina L.; Palik, Brian; D'Amato, Anthony W.; Fraver, Shawn; Bradford, John B.; Nislow, Keith H.; King, David; Brooks, Robert T.

2013-01-01

Recent interest in using forest residues and small-diameter material for biofuels is generating a renewed focus on harvesting impacts and forest sustainability. The rich legacy of research from whole-tree harvesting studies can be examined in light of this interest. Although this research largely focused on consequences for forest productivity, in particular carbon and nutrient pools, it also has relevance for examining potential consequences for biodiversity and aquatic ecosystems. This review is framed within a context of contrasting ecosystem impacts from whole-tree harvesting because it represents a high level of biomass removal. Although whole-tree harvesting does not fully use the nonmerchantable biomass available, it indicates the likely direction and magnitude of impacts that can occur through energy-wood harvesting compared with less-intensive conventional harvesting and to dynamics associated with various natural disturbances. The intent of this comparison is to gauge the degree of departure of energy-wood harvesting from less intensive conventional harvesting. The review of the literature found a gradient of increasing departure in residual structural conditions that remained in the forest when conventional and whole-tree harvesting was compared with stand-replacing natural disturbance. Important stand- and landscape-level processes were related to these structural conditions. The consequence of this departure may be especially potent because future energy-wood harvests may more completely use a greater range of forest biomass at potentially shortened rotations, creating a great need for research that explores the largely unknown scale of disturbance that may apply to our forest ecosystems.

INFINITY harvest

NASA Image and Video Library

2012-05-07

Shania Etheridge from Benjamin E. Mays Preparatory School in New Orleans shows off the head of lettuce she harvested at the INFINITY at NASA Stennis Space Center facility May 7, 2012. The Louisiana students assisted in the first harvest of lettuce from the Controlled Environment Agriculture unit, which uses an aeroponic process that involves no soil and advance LED lighting techniques.

Quantitative analysis of the patella following the harvest of a quadriceps tendon autograft with a bone block.

PubMed

Ferrer, Gerald A; Miller, R Matthew; Murawski, Christopher D; Tashman, Scott; Irrgang, James J; Musahl, Volker; Fu, Freddie H; Debski, Richard E

2016-09-01

The objective of this study was to determine parameters associated with patellar fracture after quadriceps tendon autograft harvest. Thirteen non-fractured and five fractured patella surface models were created based on patient data obtained from a prospective randomized clinical trial in order to assess geometric parameters and bending stress. Measurements that describe the bone block harvest site geometry were used to calculate three normalized parameters. The relative depth parameter describes the thickness of the bone block harvest site with respect to the thickness of the patella at the harvest site. The asymmetry parameter defines the medial-lateral location of the bone bock harvest site. The normalized bending stress parameter assesses the bending stress experienced by the remaining bone beneath the bone block harvest site. The relative depth of the bone block harvest site in the non-fractured patellae was 27 ± 12 % and for the fractured patellae was 42 ± 14 % (p < 0.05). With a value <1 indicating a more lateral location of the harvest site, asymmetry for the non-fractured group was 1.0 ± 0.5 and 0.7 ± 0.4 for the fractured group (n.s.). The maximum bending stress experienced by the non-fractured patellae was (1.8 × 10(-3) ± 1.3 × 10(-3)) mm(-3) × M and for the fractured patellae was over three times greater (6.3 × 10(-3) ± 3.7 × 10(-3)) mm(-3) × M (p < 0.05). Based on the non-uniform geometry of the patella, an emphasis should be made on harvesting a standard percentage of patella thickness rather than a fixed depth. In order to minimize the incidence of a patellar fracture, bone blocks should not be taken laterally and should not exceed 30 % of the total patella thickness at the harvest site.

Microalgae harvesting techniques: A review.

PubMed

Singh, Gulab; Patidar, S K

2018-07-01

Microalgae with wide range of commercial applications have attracted a lot of attention of the researchers in the last few decades. However, microalgae utilization is not economically sustainable due to high cost of harvesting. A wide range of solid - liquid separation techniques are available for microalgae harvesting. The techniques include coagulation and flocculation, flotation, centrifugation and filtration or a combination of various techniques. Despite the importance of harvesting to the economics and energy balance, there is no universal harvesting technique for microalgae. Therefore, this review focuses on assessing technical, economical and application potential of various harvesting techniques so as to allow selection of an appropriate technology for cost effectively harvesting of microalgae from their culture medium. Various harvesting and concentrating techniques of microalgae were reviewed to suggest order of suitability of the techniques for four main microalgae applications i.e biofuel, human and animal food, high valued products, and water quality restoration. For deciding the order of suitability, a comparative analysis of various harvesting techniques based on the six common criterions (i.e biomass quality, cost, biomass quantity, processing time, species specific and toxicity) has been done. Based on the order of various techniques vis-a-vis various criteria and preferred order of criteria for various applications, order of suitability of harvesting techniques for various applications has been decided. Among various harvesting techniques, coagulation and flocculation, centrifugation and filtration were found to be most suitable for considered applications. These techniques may be used alone or in combination for increasing the harvesting efficiency. Copyright © 2018 Elsevier Ltd. All rights reserved.

Accounting carbon storage in decaying root systems of harvested forests.

PubMed

Wang, G Geoff; Van Lear, David H; Hu, Huifeng; Kapeluck, Peter R

2012-05-01

Decaying root systems of harvested trees can be a significant component of belowground carbon storage, especially in intensively managed forests where harvest occurs repeatedly in relatively short rotations. Based on destructive sampling of root systems of harvested loblolly pine trees, we estimated that root systems contained about 32% (17.2 Mg ha(-1)) at the time of harvest, and about 13% (6.1 Mg ha(-1)) of the soil organic carbon 10 years later. Based on the published roundwood output data, we estimated belowground biomass at the time of harvest for loblolly-shortleaf pine forests harvested between 1995 and 2005 in South Carolina. We then calculated C that remained in the decomposing root systems in 2005 using the decay function developed for loblolly pine. Our calculations indicate that the amount of C stored in decaying roots of loblolly-shortleaf pine forests harvested between 1995 and 2005 in South Carolina was 7.1 Tg. Using a simple extrapolation method, we estimated 331.8 Tg C stored in the decomposing roots due to timber harvest from 1995 to 2005 in the conterminous USA. To fully account for the C stored in the decomposing roots of the US forests, future studies need (1) to quantify decay rates of coarse roots for major tree species in different regions, and (2) to develop a methodology that can determine C stock in decomposing roots resulting from natural mortality.

Flexible energy harvesting from hard piezoelectric beams

NASA Astrophysics Data System (ADS)

Delnavaz, Aidin; Voix, Jérémie

2016-11-01

This paper presents design, multiphysics finite element modeling and experimental validation of a new miniaturized PZT generator that integrates a bulk piezoelectric ceramic onto a flexible platform for energy harvesting from the human body pressing force. In spite of its flexibility, the mechanical structure of the proposed device is simple to fabricate and efficient for the energy conversion. The finite element model involves both mechanical and piezoelectric parts of the device coupled with the electrical circuit model. The energy harvester prototype was fabricated and tested under the low frequency periodic pressing force during 10 seconds. The experimental results show that several nano joules of electrical energy is stored in a capacitor that is quite significant given the size of the device. The finite element model is validated by observing a good agreement between experimental and simulation results. the validated model could be used for optimizing the device for energy harvesting from earcanal deformations.

SpaceX CRS-10 "What's On Board" Science Briefing

NASA Image and Video Library

2017-02-17

Speaking to members of the media in the Kennedy Space Center’s Press Site auditorium, Dr. Michael Freilich of the Earth Science Division at NASA Headquarters in Washington, D.C., left, and Dr. Richard Blakeslee of NASA’s Marshall Space Flight Center in Huntsville, Alabama, discussed instruments to be delivered to the International Space Station on the SpaceX CRS-10 mission. The Lightning Imaging Sensor (LIS) is to measure the amount, rate and energy of lightning around the world. The SAGE III instrument is designed to study ozone in the atmosphere. A Dragon spacecraft is scheduled to be launched from Kennedy’s Launch Complex 39A on Feb. 18 atop a SpaceX Falcon 9 rocket on the company's 10th Commercial Resupply Services mission to the space station.

Photocopy of drawing (this photograph is an 8” x 10” ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of drawing (this photograph is an 8” x 10” copy of an 8” x 10” negative; 1962 original architectural drawing located at Building No. 458, NAS Pensacola, Florida) Air conditioning in building No. 27, plan, elevations and vicinity map, Sheet 1 of 4 - U.S. Naval Air Station, Coal Shed, 499 South Avenue, Pensacola, Escambia County, FL

INFINITY harvest

NASA Image and Video Library

2012-05-07

Janice Hueschen of Innovative Imaging & Research Corp. at Stennis Space Center helps students from Benjamin E. Mays Preparatory School in New Orleans harvest lettuce at the INFINITY at NASA Stennis Space Center facility May 7, 2012. The Louisiana students assisted in the first harvest of lettuce from the Controlled Environment Agriculture unit, which uses an aeroponic process that involves no soil and advance LED lighting techniques.

Magnetic and structural properties of Mn1-xCrxAlGe (0 ≤ x ≤ 1.0)

NASA Astrophysics Data System (ADS)

Masumitsu, Hayato; Yoshinaga, Soshi; Mitsui, Yoshifuru; Umetsu, Rie Y.; Hiroi, Masahiko; Uwatoko, Yoshiya; Koyama, Keiichi

2018-06-01

The magnetic and structural properties of Mn1-xCrxAlGe (0 ≤ x ≤ 1.0) compounds were investigated. The spontaneous magnetization Ms and Curie temperature TC of Mn1-xCrxAlGe has a cusp at x = 0.2. The maximum values of Ms and TC are 1.74 μB/f.u. and 601 K, respectively. It was found that the tetragonal Cu2Sb-type structure was stable for 0 ≤ x ≤ 0.75, whereas orthorhombic TiSi2-type structure was observed for x ≥ 0.8. The reciprocal susceptibility as a function of temperature suggested that the magnetic moment of Cr is antiferromagnetically coupled with that of Mn in Cu2Sb-type structure.

Endovascular vein harvest: systemic carbon dioxide absorption.

PubMed

Maslow, Andrew M; Schwartz, Carl S; Bert, Arthur; Hurlburt, Peter; Gough, Jeffrey; Stearns, Gary; Singh, Arun K

2006-06-01

Endovascular vein harvest (EDVH) requires CO(2) insufflation to expand the subcutaneous space, allowing visualization and dissection of the saphenous vein. The purpose of this study was to assess the extent of CO(2) absorption during EDVH. Prospective observational study. Single tertiary care hospital. Sixty patients (30 EDVH and 30 open-vein harvest) undergoing isolated coronary artery bypass graft surgery. Hemodynamic, procedural, and laboratory data were collected prior to (baseline), during, and at it the conclusion (final) of vein harvesting. Data were also collected during cardiopulmonary bypass (CPB). Data were compared by using t tests, analysis of variance, and correlation statistics when needed. There were significant increases in arterial CO(2) (PaCO(2), 35%) and decreases in pH (1.35%) during EDVH. These were associated with increases in heart rate, mean blood pressure, and cardiac output. Within the EDVH group, greater elevations (>10 mmHg) in PaCO2 were more likely during difficult harvest procedures, and these patients exhibited greater increase in heart rate. Elevated CO(2) persisted during CPB, requiring higher systemic gas flows and greater use of phenylephrine to maintain desired hemodynamics. EDVH was associated with systemic absorption of CO(2). Greater absorption was more likely in difficult procedures and was associated with greater hemodynamic changes requiring medical therapy.

Dunaliella spp. Under Environmental Stress: Enhancing Lipid Production and Optimizing Harvest

NASA Astrophysics Data System (ADS)

Mixson, Stephanie Marie

Agricultural crops including corn, sugar cane, and oil palm have been investigated as potential sources for biofuel; however, they produce only a fraction of the oil percent biomass as compared to that of microalgae. Growth and lipid production by microalgae is regulated by a variety of environmental factors, including light intensity, availability of nutrients, temperature regime and salinity. We assessed 14 strains of the saltwater algae Dunaliella spp. (Teodoresco) in unialgal cultures within four species to determine a best strain or strain(s) as potential feedstock for biofuels. The taxonomy of these 14 strains was elucidated by comparing both physiological characteristics and the ITS2 and 18S regions. After careful analysis, the data suggest that the 14 strains grouped within four species: D. tertiolecta, D. pseudosalina, D. salina, and D. viridis. In addition, the isolation and accurate quantification of neutral lipids in Dunaliella was developed from existing techniques. Nile Red was optimized as a qualitative stain to rapidly screen and visualize neutral lipids. Direct transesterification was determined to be the best quantitative method because it yielded high amounts of neutral lipids with precise and reproducible results when compared to conventional extraction methods. Seven strains were selected for further efforts to enhance lipid production using salinity stress, nutrient limitation, pH stress, continuous light, and bubbling with carbon dioxide (CO2). High salinity yielded the maximum total fatty acid (FA) content (up to 65% by dry weight) in comparison to controls (˜10-25% total FAs). High pH x low salinity, low pH, and continuous light x CO2 yielded near maximum FA content (56%, 43%, and 42%, respectively). Nitrogen and/or phosphorus limitation and 12:12 (light:dark photoperiod) x CO 2 did not significantly enhance FA production (23% and 31%, respectively). Results were strain-specific with high intraspecific variation observed within each

X-15A-2 and HL-10 parked on NASA ramp

NASA Technical Reports Server (NTRS)

1966-01-01

The HL-10 is shown next to the X-15A-2 in 1966. Both aircraft later went on to set records. On October 3, 1967, the X-15A-2 reached a speed of Mach 6.7, which was the highest speed achieved by a piloted aircraft until the Space Shuttles far exceeded that speed in 1981 and afterwards. The HL-10 later became the fastest piloted lifting body when it flew at a speed of Mach 1.86 on February 18, 1970. The HL-10 was one of five heavyweight lifting-body designs flown at NASA's Flight Research Center (FRC--later Dryden Flight Research Center), Edwards, California, from July 1966 to November 1975 to study and validate the concept of safely maneuvering and landing a low lift-over-drag vehicle designed for reentry from space. Northrop Corporation built the HL-10 and M2-F2, the first two of the fleet of 'heavy' lifting bodies flown by the NASA Flight Research Center. The contract for construction of the HL-10 and the M2-F2 was $1.8 million. 'HL' stands for horizontal landing, and '10' refers to the tenth design studied by engineers at NASA's Langley Research Center, Hampton, Va. After delivery to NASA in January 1966, the HL-10 made its first flight on Dec. 22, 1966, with research pilot Bruce Peterson in the cockpit. Although an XLR-11 rocket engine was installed in the vehicle, the first 11 drop flights from the B-52 launch aircraft were powerless glide flights to assess handling qualities, stability, and control. In the end, the HL-10 was judged to be the best handling of the three original heavy-weight lifting bodies (M2-F2/F3, HL-10, X-24A). The HL-10 was flown 37 times during the lifting body research program and logged the highest altitude and fastest speed in the Lifting Body program. On Feb. 18, 1970, Air Force test pilot Peter Hoag piloted the HL-10 to Mach 1.86 (1,228 mph). Nine days later, NASA pilot Bill Dana flew the vehicle to 90,030 feet, which became the highest altitude reached in the program. Some new and different lessons were learned through the successful

Timber harvest as the predominant disturbance regime in northeastern U.S. forests: Effects of harvest intensification

USGS Publications Warehouse

Brown, Michelle L.; Canham, Charles D.; Murphy, Lora; Donovan, Therese M.

2018-01-01

Harvesting is the leading cause of adult tree mortality in forests of the northeastern United States. While current rates of timber harvest are generally sustainable, there is considerable pressure to increase the contribution of forest biomass to meet renewable energy goals. We estimated current harvest regimes for different forest types and regions across the U.S. states of New York, Vermont, New Hampshire, and Maine using data from the U.S. Forest Inventory and Analysis Program. We implemented the harvest regimes in SORTIE‐ND, an individual‐based model of forest dynamics, and simulated the effects of current harvest regimes and five additional harvest scenarios that varied by harvest frequency and intensity over 150 yr. The best statistical model for the harvest regime described the annual probability of harvest as a function of forest type/region, total plot basal area, and distance to the nearest improved road. Forests were predicted to increase in adult aboveground biomass in all harvest scenarios in all forest type and region combinations. The magnitude of the increase, however, varied dramatically—increasing from 3% to 120% above current landscape averages as harvest frequency and intensity decreased. The variation can be largely explained by the disproportionately high harvest rates estimated for Maine as compared with the rest of the region. Despite steady biomass accumulation across the landscape, stands that exhibited old‐growth characteristics (defined as ≥300 metric tons of biomass/hectare) were rare (8% or less of stands). Intensified harvest regimes had little effect on species composition due to widespread partial harvesting in all scenarios, resulting in dominance by late‐successional species over time. Our analyses indicate that forest biomass can represent a sustainable, if small, component of renewable energy portfolios in the region, although there are tradeoffs between carbon sequestration in forest biomass and sustainable

Burnt sugarcane harvesting is associated with rhinitis symptoms and inflammatory markers.

PubMed

Trevisan, Iara Buriola; Santos, Ubiratan de Paula; Leite, Marceli Rocha; Ferreira, Aline Duarte; Silva, Bruna Spolador de Alencar; Freire, Ana Paula Coelho Figueira; Brigida, Gabriel Faustino Santa; Ramos, Ercy Mara Cipulo; Ramos, Dionei

2018-04-05

Burnt sugarcane harvesting requires intense physical exertion in an environment with high temperatures and exposure to particulate matter. To evaluate the effects of burnt sugarcane harvesting on rhinitis symptoms and inflammatory markers in sugarcane workers. 32 male sugarcane workers were evaluated with questionnaire for rhinitis symptoms, and for inflammatory markers on peripheral blood and nasal lavage, in the non-harvesting, and 3 and 6 months into the sugarcane harvesting period. Weather data and particulate matter fine concentrations were measured in the same day. The particulate matter concentrations in sugarcane harvesting were 27 (23-33μg/m 3 ), 112 (96-122μg/m 3 ), and 63 (17-263μg/m 3 ); 24h temperatures were 32.6 (25.4-37.4°C), 32.3 (26.7-36.7°C) and 29.7 (24.1-34.0°C) and relative humidities were 45.4 (35.0-59.7%), 47.9 (39.1-63.0%), and 59.9 (34.7-63.2%) in the non-harvesting period, three and 6 months of the harvesting period. The age was 37.4±10.9 years. The prevalence of rhinitis symptoms was significantly higher at 3 months of the harvesting period (53.4%), compared to non-harvesting period (26.7%; p=0.039) and at 6 months into the harvesting period (20%; p=0.006). Concentrations of interleukin 6 (IL-6) in nasal lavage increased after 3 months of the harvesting period compared to the non-harvesting period (p=0.012). The presence of rhinitis symptoms, after 3 months of the harvesting period, was directly associated with blood eosinophils and inversely associated with neutrophils. After 3 months of work in burnt sugarcane harvesting the prevalence of rhinitis symptoms and IL-6 in nasal lavage increased. Furthermore, eosinophil counts were directly associated with the rhinitis symptoms in the period of higher concentration of particulate matter. Copyright © 2018. Published by Elsevier Editora Ltda.

Harvest and dynamics of duck populations

USGS Publications Warehouse

Sedinger, James S.; Herzog, Mark P.

2012-01-01

The role of harvest in the dynamics of waterfowl populations continues to be debated among scientists and managers. Our perception is that interested members of the public and some managers believe that harvest influences North American duck populations based on calls for more conservative harvest regulations. A recent review of harvest and population dynamics of North American mallard (Anas platyrhynchos) populations (Pöysä et al. 2004) reached similar conclusions. Because of the importance of this issue, we reviewed the evidence for an impact of harvest on duck populations. Our understanding of the effects of harvest is limited because harvest effects are typically confounded with those of population density; regulations are typically most liberal when populations are greatest. This problem also exists in the current Adaptive Harvest Management Program (Conn and Kendall 2004). Consequently, even where harvest appears additive to other mortality, this may be an artifact of ignoring effects of population density. Overall, we found no compelling evidence for strong additive effects of harvest on survival in duck populations that could not be explained by other factors.

1971 Washington timber harvest.

Treesearch

Brian R. Wall

1972-01-01

Washington's 1971 timber harvest of 6.45 billion board feet was nearly the same as the 1970 harvest level. The total timber harvest on public lands increased nearly 4 percent with a 30-percent increase in eastern Washington more than offsetting a 5-percent decline in western Washington. Part of the increase in eastern Washington reflects salvage of a large volume...

Influence of Sm doping on structural and dielectric properties of Y{sub 1-x}Sm{sub x}MnO{sub 3} (x = 0, 0.10, 0.20) manganites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dar, Mashkoor Ahmad, E-mail: darmashkoor.phst@gmail.com; Dar, Hilal Ahmad; Varshney, Dinesh, E-mail: vdinesh33@rediffmail.com

2016-05-06

Structural and dielectric properties of polycrystalline YMnO{sub 3} (x = 0.0, 0.10 and 0.20) which was prepared by solid-state reaction route, have been investigated. The X-ray diffraction pattern reveals that all the samples are in single phase and show hexagonal structure with P63cm space group. The particle size decreases with increase in Sm doping while to that X-ray density increases with increasing x. The dielectric constant (ε’) of Y{sub 1-x}Sm{sub x}MnO{sub 3} measured in the frequency range 10 Hz to 1MHz is much higher at lower frequencies (≤ 1KHz) and its value decreases with enhanced frequency. At very high frequencies, ε’more » becomes frequency independent and is attributed to Maxwell Wagner type of interfacial polarization model. A very high value of dielectric constant ∼18642 is observed for x = 10%. The dielectric loss (tan δ) decreases wit increase in Sm doping.« less

Electrical and optical evaluation of n-type doping in In x Ga(1-x)P nanowires.

PubMed

Zeng, Xulu; Mourão, Renato T; Otnes, Gaute; Hultin, Olof; Dagytė, Vilgailė; Heurlin, Magnus; Borgström, Magnus T

2018-06-22

To harvest the benefits of III-V nanowires in optoelectronic devices, the development of ternary materials with controlled doping is needed. In this work, we performed a systematic study of n-type dopant incorporation in dense In x Ga (1-x) P nanowire arrays using tetraethyl tin (TESn) and hydrogen sulfide (H 2 S) as dopant precursors. The morphology, crystal structure and material composition of the nanowires were characterized by use of scanning electron microscopy, transmission electron microscopy and energy dispersive x-ray analysis. To investigate the electrical properties, the nanowires were broken off from the substrate and mechanically transferred to thermally oxidized silicon substrates, after which electron beam lithography and metal evaporation were used to define electrical contacts to selected nanowires. Electrical characterization, including four-probe resistivity and Hall effect, as well as back-gated field effect measurements, is combined with photoluminescence spectroscopy to achieve a comprehensive evaluation of the carrier concentration in the doped nanowires. We measure a carrier concentration of ∼1 × 10 16 cm -3 in nominally intrinsic nanowires, and the maximum doping level achieved by use of TESn and H 2 S as dopant precursors using our parameters is measured to be ∼2 × 10 18 cm -3 , and ∼1 × 10 19 cm -3 , respectively (by Hall effect measurements). Hence, both TESn and H 2 S are suitable precursors for a wide range of n-doping levels in In x Ga (1-x) P nanowires needed for optoelectronic devices, grown via the vapor-liquid-solid mode.

North American X-15 model tested in 300MPH Low Speed 7x10 Tunnel

NASA Image and Video Library

1958-09-07

A one-twentieth scale model of the X-15 originally suspended beneath the wing of a B-52 is observed by a scientist of the National Aeronautics and Space Administration (NASA) as it leaves the bomber model in tests to determine the release characteristics and drop motion of the research airplane. Caption: The aerodynamics of air launching the North American X-15 being investigated in the 300MPH Low Speed 7x10 Tunnel, about 1957. Photograph published in Engineer in Charge: A History of the Langley Aeronautical Laboratory, 1917-1958 by James R. Hansen. Page 366. Photograph also published in Sixty Years of Aeronautical Research 1917-1977 By David A. Anderton. A NASA publication. Page 49.

Survival and harvest-related mortality of white-tailed deer in Massachusetts

USGS Publications Warehouse

Mcdonald, John E.; DeStefano, Stephen; Gaughan, Christopher; Mayer, Michael; Woytek, William A.; Christensen, Sonja; Fuller, Todd K.

2011-01-01

We monitored 142 radiocollared adult (≥1.0 yr old) white-tailed deer (Odocoileus virginianus) in 3 study areas of Massachusetts, USA, to estimate annual survival and mortality due to legal hunting. We then applied these rates to deer harvest information to estimate deer population trends over time, and compared these to trends derived solely from harvest data estimates. Estimated adult female survival rates were similar (0.82–0.86), and uniformly high, across 3 management zones in Massachusetts that differed in landscape composition, human density, and harvest regulations. Legal hunting accounted for 16–29% of all adult female mortality. Estimated adult male survival rates varied from 0.55 to 0.79, and legal hunting accounted for 40–75% of all mortality. Use of composite hunting mortality rates produced realistic estimates for adult deer populations in 2 zones, but not for the third, where estimation was hindered by regulatory restrictions on antlerless deer harvest. In addition, the population estimates we calculated were generally higher than those derived from population reconstruction, likely due to relatively low harvest pressure. Legal harvest may not be the dominant form of deer mortality in developed landscapes; thus, estimates of populations or trends that rely solely on harvest data will likely be underestimates.

1968 Oregon timber harvest.

Treesearch

Brian R. Wall

1969-01-01

Oregon's 1968 timber harvest of 9.74 billion board feet was the largest since 1952, when a record 9.80 billion board feet was produced. Public agencies' harvests increased 25.0 percent in western Oregon and 4.1 percent in eastern Oregon for a total increase of 19.1 percent, 864.9 million board feet above the public harvest in 1967. National Forests had the...

1967 Oregon timber harvest.

Treesearch

Brian R. Wall

1968-01-01

Oregon's timber harvest was 8.4 billion board feet in 1967, 6.3 percent below the 1966 harvest. The total private harvest declined 7 percent in 1967 with a 153-million-board-foot (4.3-percent) decrease in western Oregon and a 138-million-board-foot (22.7-percent) drop in eastern Oregon. Forest industries had the greatest decline in production of all owners; their...

1967 Washington timber harvest.

Treesearch

Brian R. Wall

1968-01-01

Washington's 1967 timber harvest declined to 5.9 billion board feet, 2.3 percent below the 1966 harvest. The cut on public lands remained about the same as in 1966 with a 6.7-percent increase in public cut in eastern Washington, offsetting a 2.2-percent decrease in western Washington. The Indian lands had the greatest increase in harvest, up 35 million board feet...

1970 Washington timber harvest.

Treesearch

Brian R. Wall

1971-01-01

Washington's 1970 timber harvest of 6.46 billion board feet was 7.8 percent below the near record harvest of 7 billion board feet established in 1969. Timber harvests on all public lands declined 13 percent with a 9.0-percent reduction in western Washington and a 22.9-percent drop in eastern Washington. State lands led the decline in public production with a 142-...

Superconductivity, pairing symmetry, and disorder in the doped topological insulator Sn 1 - x In x Te for x ≥ 0.10

DOE PAGES

Smylie, M. P.; Claus, H.; Kwok, W. -K.; ...

2018-01-19

The temperature dependence of the London penetration depth Δλ(T) in the superconducting doped topological crystalline insulator Sn 1-xIn x Te was measured down to 450 mK for two different doping levels, x ≈ 0.45 (optimally doped) and x ≈ 0.10 (underdoped), bookending the range of cubic phase in the compound. The results indicate no deviation from fully gapped BCS-like behavior, eliminating several candidate unconventional gap structures. Critical field values below 1 K and other superconducting parameters are also presented. The introduction of disorder by repeated particle irradiation with 5 MeV protons does not enhance T c, indicating that ferroelectric interactionsmore » do not compete with superconductivity.« less

Superconductivity, pairing symmetry, and disorder in the doped topological insulator Sn 1 - x In x Te for x ≥ 0.10

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smylie, M. P.; Claus, H.; Kwok, W. -K.

The temperature dependence of the London penetration depth Δλ(T) in the superconducting doped topological crystalline insulator Sn 1-xIn x Te was measured down to 450 mK for two different doping levels, x ≈ 0.45 (optimally doped) and x ≈ 0.10 (underdoped), bookending the range of cubic phase in the compound. The results indicate no deviation from fully gapped BCS-like behavior, eliminating several candidate unconventional gap structures. Critical field values below 1 K and other superconducting parameters are also presented. The introduction of disorder by repeated particle irradiation with 5 MeV protons does not enhance T c, indicating that ferroelectric interactionsmore » do not compete with superconductivity.« less

Site preparation treatments and nutrient loss following complete harvest csing the Nicholson-Koch mobile chipper

Treesearch

R. Gordon; James H. Miller; C. Brewer

1981-01-01

Site disturbance, vegetation control, and nutrient loss were assessed following complete biomass harvesting of a pine plantation by the Nicholson-Koch mobile chipper. Thirty-two percent of the soil area was significantly compacted to a 10 cm depth. Litter zone material showed a two-fold increase due to chips lost during harvest. Herbicide treatments (Tordon 10K and...

Light-Harvesting Organic Nanocrystals Capable of Photon Upconversion.

PubMed

Li, Li; Zeng, Yi; Yu, Tianjun; Chen, Jinping; Yang, Guoqiang; Li, Yi

2017-11-23

Harvesting and converting low energy photons into higher ones through upconversion have great potential in solar energy conversion. A light-harvesting nanocrystal assembled from 9,10-distyrylanthracene and palladium(II) meso-tetraphenyltetrabenzoporphyrin as the acceptor and the sensitizer, respectively effects red-to-green upconversion under incoherent excitation of low power density. An upconversion quantum yield of 0.29±0.02 % is obtained upon excitation with 640 nm laser of 120 mW cm -2 . The well-organized packing of acceptor molecules with aggregation-induced emission in the nanocrystals dramatically reduces the nonradiative decay of the excited acceptor, benefits the triplet-triplet annihilation (TTA) upconversion and guides the consequent upconverted emission. This work provides a straightforward strategy to develop light-harvesting nanocrystals based on TTA upconversion, which is attractive for energy conversion and photonic applications. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Designing and synthesis of a polymer matrix piezoelectric composite for energy harvesting

NASA Astrophysics Data System (ADS)

Biswal, Asutya Kumar; Das, Satyabati; Roy, Amritendu

2017-02-01

Now a day, a large variety of electronic and network devices require small yet steady power supply for operation. Traditionally, these devices are battery operated and the batteries are periodically charged for continuous operation. Often, the devices are so located that supply of power to recharge the batteries becomes challenging. Electrical energy harvesting by means of principle of piezoelectricity could be a viable solution to the above problem by means of providing a permanent power source. In this regard, piezoelectric lead zirconium titanate (PZT) was found to be a potential material. However, poor mechanical properties (brittleness) of bulk ceramic materials have been a concern for energy harvesting by means of mechanical motion (footsteps). In the present work, Pb(Zr 0.52 Ti 0.48)1-x NbxO 3 at x=0.05 was prepared by conventional solid state synthesis route. XRD and SEM analyses were performed for structural characterization. PZT powders were found to be in single phase with tetragonal symmetry without any trace of a second phase. To render the required mechanical properties (flexibility), in the present work, we designed a polymer matrix ceramic composite without much compromising the piezoelectric properties. We prepared composite thick films of lead zirconium titanate (PZT) ceramic in poly vinylidene fluoride (PVDF) polymer matrix with varied composition of PZT from 10-50 vol %. The study of surface morphology by scanning electron microscope (SEM) shows good degree of dispersion of PZT in PVDF matrix. Ferroelectric characteristics of the composite films were studied by measuring the polarization-electric field hysteresis loops. Generated output voltage and current from the composite films are found to be approximately 0.35 volt and 4 nA, respectively.

Factors influencing reporting and harvest probabilities in North American geese

USGS Publications Warehouse

Zimmerman, G.S.; Moser, T.J.; Kendall, W.L.; Doherty, P.F.; White, Gary C.; Caswell, D.F.

2009-01-01

We assessed variation in reporting probabilities of standard bands among species, populations, harvest locations, and size classes of North American geese to enable estimation of unbiased harvest probabilities. We included reward (US10,20,30,50, or100) and control (0) banded geese from 16 recognized goose populations of 4 species: Canada (Branta canadensis), cackling (B. hutchinsii), Ross's (Chen rossii), and snow geese (C. caerulescens). We incorporated spatially explicit direct recoveries and live recaptures into a multinomial model to estimate reporting, harvest, and band-retention probabilities. We compared various models for estimating harvest probabilities at country (United States vs. Canada), flyway (5 administrative regions), and harvest area (i.e., flyways divided into northern and southern sections) scales. Mean reporting probability of standard bands was 0.73 (95 CI 0.690.77). Point estimates of reporting probabilities for goose populations or spatial units varied from 0.52 to 0.93, but confidence intervals for individual estimates overlapped and model selection indicated that models with species, population, or spatial effects were less parsimonious than those without these effects. Our estimates were similar to recently reported estimates for mallards (Anas platyrhynchos). We provide current harvest probability estimates for these populations using our direct measures of reporting probability, improving the accuracy of previous estimates obtained from recovery probabilities alone. Goose managers and researchers throughout North America can use our reporting probabilities to correct recovery probabilities estimated from standard banding operations for deriving spatially explicit harvest probabilities.

1966 Washington timber harvest.

Treesearch

Brian R. Wall

1967-01-01

The 1966 Washington timber harvest of 6.1 billion board feet was 6.8 percent below the 1965 level. This was the first decline since 1961. In part, the lower harvest in 1966 was due to completion of salvage logging of the 1962 blowdown. The volume of dead timber salvaged in 1966 was only 6 percent of the total, compared with 15 percent in 1965. The live timber harvest...

Intricate Li-Sn Disorder in Rare-Earth Metal-Lithium Stannides. Crystal Chemistry of RE3Li4- xSn4+ x (RE = La-Nd, Sm; x < 0.3) and Eu7Li8- xSn10+ x ( x ≈ 2.0).

PubMed

Suen, Nian-Tzu; Guo, Sheng-Ping; Hoos, James; Bobev, Svilen

2018-05-07

Reported are the syntheses, crystal structures, and electronic structures of six rare-earth metal-lithium stannides with the general formulas RE 3 Li 4- x Sn 4+ x (RE = La-Nd, Sm) and Eu 7 Li 8- x Sn 10+ x . These new ternary compounds have been synthesized by high-temperature reactions of the corresponding elements. Their crystal structures have been established using single-crystal X-ray diffraction methods. The RE 3 Li 4- x Sn 4+ x phases crystallize in the orthorhombic body-centered space group Immm (No. 71) with the Zr 3 Cu 4 Si 4 structure type (Pearson code oI22), and the Eu 7 Li 8- x Sn 10+ x phase crystallizes in the orthorhombic base-centered space group Cmmm (No. 65) with the Ce 7 Li 8 Ge 10 structure type (Pearson code oC50). Both structures can be consdered as part of the [RESn 2 ] n [RELi 2 Sn] m homologous series, wherein the structures are intergrowths of imaginary RESn 2 (AlB 2 -like structure type) and RELi 2 Sn (MgAl 2 Cu-like structure type) fragments. Close examination the structures indicates complex occupational Li-Sn disorder, apparently governed by the drive of the structure to achieve an optimal number of valence electrons. This conclusion based on experimental results is supported by detailed electronic structure calculations, carried out using the tight-binding linear muffin-tin orbital method.

The impact of donor characteristics on the immune cell composition of mixture allografts of granulocyte-colony-stimulating factor-mobilized marrow harvests and peripheral blood harvests.

PubMed

Wang, Yu-Tong; Zhao, Xiang-Yu; Zhao, Xiao-Su; Xu, Lan-Ping; Zhang, Xiao-Hui; Wang, Yu; Liu, Kai-Yan; Chang, Ying-Jun; Huang, Xiao-Jun

2015-12-01

The association of donor characteristics with immune cell composition in allografts remains poorly understood. In this retrospective study, the effects of donor characteristics on immune cell composition in allografts were investigated. The correlations of donor characteristics with the immune cell composition in mixture allografts of granulocyte-colony-stimulating factor-mobilized marrow harvests and peripheral blood harvests of 390 healthy donors (male, 240; female, 150; median age, 40 years old) were analyzed. The median doses of CD3+ T cells, CD4+ T cells, CD8+ T cells, CD3+CD4-CD8- T cells, and monocytes in mixture allografts were 160.57 × 10(6), 89.29 × 10(6), 56.16 × 10(6), 10.87 × 10(6), and 137.94 × 10(6)/kg, respectively. Multivariate analysis showed that younger donor age was associated with a higher dose of CD3+ T cells (p = 0.006), CD3+CD8+ T cells (p < 0.001), CD3+CD4-CD8- T cells (p = 0.004), and monocytes (p = 0.014), as well as a higher ratio of CD3+CD4-CD8- T cells/CD3+ T cells (p < 0.001) in the mixture allografts. A negative association of donor weight with CD3+ T cells (p < 0.001), CD4+ T cells (p = 0.002), CD8+ T cells (p < 0.001), and CD3+CD4-CD8- T cells (p = 0.044) was observed. The count of peripheral blood lymphocyte pre-peripheral blood apheresis was correlated with the yield of CD3+ T cells (p < 0.001) and CD4+ T cells (p = 0.001). The peripheral blood monocyte count before marrow harvest predicted the monocyte dose (p = 0.002). The results suggested that older and overweight donors should not be chosen. The monocyte and lymphocyte counts before harvest could predict the yield of immune cells in allografts. © 2015 AABB.

Advancements in Cotton Harvesting Research

USDA-ARS?s Scientific Manuscript database

Cotton harvesting research within USDA ARS is focused on improving harvest productivity, cotton quality, and producer profitability. In recent years, our work has encompassed efforts to improve both spindle picker and brush-roll stripper harvesting systems. Specifically, work with cotton pickers i...

Nonlinear energy harvesting.

PubMed

Cottone, F; Vocca, H; Gammaitoni, L

2009-02-27

Ambient energy harvesting has been in recent years the recurring object of a number of research efforts aimed at providing an autonomous solution to the powering of small-scale electronic mobile devices. Among the different solutions, vibration energy harvesting has played a major role due to the almost universal presence of mechanical vibrations. Here we propose a new method based on the exploitation of the dynamical features of stochastic nonlinear oscillators. Such a method is shown to outperform standard linear oscillators and to overcome some of the most severe limitations of present approaches. We demonstrate the superior performances of this method by applying it to piezoelectric energy harvesting from ambient vibration.

Superconductivity, pairing symmetry, and disorder in the doped topological insulator Sn 1 - x In x Te for x ≥ 0.10

DOE PAGES

Smylie, M. P.; Claus, H.; Kwok, W. -K.; ...

2018-01-19

In this paper, the temperature dependence of the London penetration depth Δλ(T) in the superconducting doped topological crystalline insulator Sn 1-xIn xTe was measured down to 450 mK for two different doping levels, x ≈ 0.45 (optimally doped) and x ≈ 0.10 (underdoped), bookending the range of cubic phase in the compound. The results indicate no deviation from fully gapped BCS-like behavior, eliminating several candidate unconventional gap structures. Critical field values below 1 K and other superconducting parameters are also presented. Finally, the introduction of disorder by repeated particle irradiation with 5 MeV protons does not enhance T c, indicatingmore » that ferroelectric interactions do not compete with superconductivity.« less

Superconductivity, pairing symmetry, and disorder in the doped topological insulator Sn 1 - x In x Te for x ≥ 0.10

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smylie, M. P.; Claus, H.; Kwok, W. -K.

In this paper, the temperature dependence of the London penetration depth Δλ(T) in the superconducting doped topological crystalline insulator Sn 1-xIn xTe was measured down to 450 mK for two different doping levels, x ≈ 0.45 (optimally doped) and x ≈ 0.10 (underdoped), bookending the range of cubic phase in the compound. The results indicate no deviation from fully gapped BCS-like behavior, eliminating several candidate unconventional gap structures. Critical field values below 1 K and other superconducting parameters are also presented. Finally, the introduction of disorder by repeated particle irradiation with 5 MeV protons does not enhance T c, indicatingmore » that ferroelectric interactions do not compete with superconductivity.« less

50 CFR 679.64 - Harvesting sideboard limits in other fisheries.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 11 2011-10-01 2011-10-01 false Harvesting sideboard limits in other fisheries. 679.64 Section 679.64 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OF THE EXCLUSIVE...

A Miniature Magnetic-Force-Based Three-Axis AC Magnetic Sensor with Piezoelectric/Vibrational Energy-Harvesting Functions.

PubMed

Hung, Chiao-Fang; Yeh, Po-Chen; Chung, Tien-Kan

2017-02-08

In this paper, we demonstrate a miniature magnetic-force-based, three-axis, AC magnetic sensor with piezoelectric/vibrational energy-harvesting functions. For magnetic sensing, the sensor employs a magnetic-mechanical-piezoelectric configuration (which uses magnetic force and torque, a compact, single, mechanical mechanism, and the piezoelectric effect) to convert x -axis and y -axis in-plane and z -axis magnetic fields into piezoelectric voltage outputs. Under the x -axis magnetic field (sine-wave, 100 Hz, 0.2-3.2 gauss) and the z -axis magnetic field (sine-wave, 142 Hz, 0.2-3.2 gauss), the voltage output with the sensitivity of the sensor are 1.13-26.15 mV with 8.79 mV/gauss and 1.31-8.92 mV with 2.63 mV/gauss, respectively. In addition, through this configuration, the sensor can harness ambient vibrational energy, i.e., possessing piezoelectric/vibrational energy-harvesting functions. Under x -axis vibration (sine-wave, 100 Hz, 3.5 g) and z -axis vibration (sine-wave, 142 Hz, 3.8 g), the root-mean-square voltage output with power output of the sensor is 439 mV with 0.333 μW and 138 mV with 0.051 μW, respectively. These results show that the sensor, using this configuration, successfully achieves three-axis magnetic field sensing and three-axis vibration energy-harvesting. Due to these features, the three-axis AC magnetic sensor could be an important design reference in order to develop future three-axis AC magnetic sensors, which possess energy-harvesting functions, for practical industrial applications, such as intelligent vehicle/traffic monitoring, processes monitoring, security systems, and so on.

[Effects of Triton X-100 on the oxygen uptake rate of photosystem I particles treated at 70 degrees C].

PubMed

Chen, Wei; Yang, Zhen-Le; Li, Liang-Bi; Kuang, Ting-Yun

2005-06-01

The characteristics including oxygen uptake rates, fluorescence spectra and absorption spectra of photosystem I particles with or without Triton-X 100 treatment before or after the incubation at 70 degrees C for 10 min were compared. The oxygen uptake rates of photosystem I particles decreased after being incubated at 70 degrees C for 10 min, which could be recovered by the addition of Triton-X 100. Singlet oxygen was formed when the light-harvesting complex I was separated from the core complex of photosystem I, which resulted in high oxygen uptake rate. There was much difference in the fluorescence spectra of photosystem I particles between photosystem I particles treated with Triton-X 100 after the incubation at 70 degrees C for 10 min or not, which implies the ability of Triton-X 100 to promote the recovery of photosystem I particles after the incubation at 70 degrees C for 10 min.

Veg-01 Plant Harvest

NASA Image and Video Library

2014-06-10

ISS040-E-009125 (10 June 2014) --- In the International Space Station?s Harmony node, NASA astronaut Steve Swanson, Expedition 40 commander, harvests a crop of red romaine lettuce plants that were grown from seed inside the station?s Veggie facility, a low-cost plant growth chamber that uses a flat-panel light bank for plant growth and crew observation. For the Veg-01 experiment, researchers are testing and validating the Veggie hardware, and the plants will be returned to Earth to determine food safety.

Veg-01 Plant Harvest

NASA Image and Video Library

2014-06-10

ISS040-E-009124 (10 June 2014) --- In the International Space Station?s Harmony node, NASA astronaut Steve Swanson, Expedition 40 commander, harvests a crop of red romaine lettuce plants that were grown from seed inside the station?s Veggie facility, a low-cost plant growth chamber that uses a flat-panel light bank for plant growth and crew observation. For the Veg-01 experiment, researchers are testing and validating the Veggie hardware, and the plants will be returned to Earth to determine food safety.

Veg-01 Plant Harvest

NASA Image and Video Library

2014-06-10

ISS040-E-009116 (10 June 2014) --- In the International Space Station?s Harmony node, NASA astronaut Steve Swanson, Expedition 40 commander, harvests a crop of red romaine lettuce plants that were grown from seed inside the station?s Veggie facility, a low-cost plant growth chamber that uses a flat-panel light bank for plant growth and crew observation. For the Veg-01 experiment, researchers are testing and validating the Veggie hardware, and the plants will be returned to Earth to determine food safety.

Hydrologic resilience of a Canadian Foothills watershed to forest harvest

NASA Astrophysics Data System (ADS)

Goodbrand, Amy; Anderson, Axel

2016-04-01

Recent investigations of long-term hydrometeorological, groundwater, and streamflow data from watersheds on the eastern slopes of the Canadian Rocky Mountains showed the streamflow regime was resilient to forest harvest. These watersheds had low levels of harvest relative to their size and a large area of sparsely vegetated alpine talus slopes and exposed bedrock; an area shown to generate the majority of runoff for streamflow. In contrast, watersheds located in the foothills of the Rocky Mountains are of lower relief and typically have harvestable timber throughout the watershed; therefore, these watersheds may be more sensitive to forest disturbance and have increased potential for streamflow response. This project assesses the hydrologic resilience of an Alberta Foothills watershed to forest harvest using a 23-year dataset from the Tri-Creeks Experimental Watershed (Tri-Creeks). Tri-Creeks has been the site of intensive streamflow, groundwater, snow accumulation, and precipitation observations from 1967 - 1990. During the early 1980s, forestry experiments were conducted to compare the effects of timber harvest and riparian buffers, and the effectiveness of timber harvesting ground rules in protecting fisheries and maintaining water resources within three sub-watersheds: Eunice (16.8 km2; control); Deerlick (15.2 km2; 36% streamside timber removal); and, Wampus (28.3 km2; 37% clear-cut). Statistical analyses were used to compare the pre-and post-harvest ratios of treatment to control sub-watershed runoff for: water year, monthly (April - October), snowmelt peak flow, and low flow (10th percentile streamflow) periods as an assessment of hydrologic resilience to forest harvest. The only significant post-harvest change was an increase in water yield during May at Wampus (Mann-Whitney (MW), p<0.05) and Deerlick (MW, p<0.1) Creeks. The lack of change in snowmelt peak flow timing or magnitude was not expected, particularly in Deerlick, which had 36% streamside timber

Green Chile Pepper Harvest Mechanization

USDA-ARS?s Scientific Manuscript database

Pungent green chile (genus /Capsicum/, also spelled chili) is a large, fragile fruit growing on berry shrubs. Chile is harvested by hand to maximize yields and minimize fruit damage. Labor for hand harvesting chile is increasingly costly and difficult to obtain. Harvest mechanization is viewed as...

Genotype x Harvest Date Analysis Reveals Late Sugar Phenotypes in Stage 2 of the Canal Point Sugarcane Cultivar Development Program

USDA-ARS?s Scientific Manuscript database

Florida’s sugarcane harvest season ranges from late October through early April. Commercial harvesting schedules can, however, be adversely affected by weather conditions that prevent entry of heavy equipment in the fields. The El Niño rainy season of 2015-2016 was such an example, where record rain...

Following the fate of harvest-damaged trees 13 years after harvests

Treesearch

Randy G. Jensen; John M. Kabrick

2014-01-01

Logging damage to residual trees during harvest operations can reduce the future volume, quality, and value of wood products. Timber harvests in 1996 on the Missouri Ozark Forest Ecosystem Project (MOFEP) provided a rare opportunity to follow the fate of trees wounded by felling or by skidding with rubber-tired skidders.

Apex-4 for SpaceX CRS-10

NASA Image and Video Library

2017-02-16

APEX-04, or Advanced Plant EXperiments-04, is being prepared in a cold room in the Kennedy Space Center Processing Facility for SpaceX-10. The 30 petri plates are bundled into groups of 10 and placed into one of three science kits. The science kits allow easy handling when the crew removes the plates from cold stowage on station. Dr. Anna Lisa Paul of the University of Florida is the principal investigator for APEX-04. Apex-04 is an experiment involving Arabidopsis in petri plates inside the Veggie facility aboard the International Space Station. Since Arabidopsis is the genetic model of the plant world, it is a perfect sample organism for performing genetic studies in spaceflight. The experiment is the result of a grant from NASA’s Space Life and Physical Sciences division.

A novel high-density power energy harvesting methodology for transmission line online monitoring devices.

PubMed

Liu, Yadong; Xie, Xiaolei; Hu, Yue; Qian, Yong; Sheng, Gehao; Jiang, Xiuchen; Liu, Yilu

2016-07-01

This paper presents a novel energy-harvesting model which takes the primary current, secondary turns, dimension, the magnitude of magnetic flux density B, and the core loss resistance into consideration systematically. The relationship among the potential maximum output power, the dimension of energy harvesting coil (EHC), the load type of EHC, and the secondary turns is predicted by theoretical analysis and further verified by experiments. A high power density harvester is also developed and tested. It is shown that the power density of this novel harvester is 0.7 mW/g at 10 A, which is more than 2 times powerful than the traditional ones. Hence, it could lighten the half weight of the harvester at the same conditions.

A 66pW Discontinuous Switch-Capacitor Energy Harvester for Self-Sustaining Sensor Applications.

PubMed

Wu, Xiao; Shi, Yao; Jeloka, Supreet; Yang, Kaiyuan; Lee, Inhee; Sylvester, Dennis; Blaauw, David

2016-06-01

We present a discontinuous harvesting approach for switch capacitor DC-DC converters that enables ultra-low power energy harvesting. By slowly accumulating charge on an input capacitor and then transferring it to a battery in burst-mode, switching and leakage losses in the DC-DC converter can be optimally traded-off with the loss due to non-ideal MPPT operation. The harvester uses a 15pW mode controller, an automatic conversion ratio modulator, and a moving sum charge pump for low startup energy upon a mode switch. In 180nm CMOS, the harvester achieves >40% end-to-end efficiency from 113pW to 1.5μW with 66pW minimum input power, marking a >10× improvement over prior ultra-low power harvesters.

Piezoelectric energy harvesting from heartbeat vibrations for leadless pacemakers

NASA Astrophysics Data System (ADS)

Ansari, M. H.; Karami, M. Amin

2015-12-01

This paper studies energy harvesting from heartbeat vibrations using fan-folded piezoelectric beams. The generated energy from the heartbeat can be used to power a leadless pacemaker. In order to utilize the available 3 dimensional space to the energy harvester, we chose the fan-folded design. The proposed device consists of several piezoelectric beams stacked on top of each other. The size for this energy harvester is 2 cm by 0.5 cm by 1 cm, which makes the natural frequency very high. High natural frequency is one major concern about the micro-scaled energy harvesters. By utilizing the fan-folded geometry and adding tip mass and link mass to the configuration, this natural frequency is reduced to the desired range. This fan-folded design makes it possible to generate more than 10 μW of power. The proposed device does not incorporate magnets and is thus Magnetic resonance imaging (MRI) compatible. Although our device is a linear energy harvester, it is shown that the device is relatively insensitive to the heartrate. The natural frequencies and the mode shapes of the device are calculated. An analytical solution is presented and the method is verified by experimental investigation. We use a closed loop shaker controller and a shaker to simulate the heartbeat vibrations. The developed analytical model is verified through comparison of theoretical and experimental tip displacement and acceleration frequency response functions.

Double synchronized switch harvesting (DSSH): a new energy harvesting scheme for efficient energy extraction.

PubMed

Lallart, Mickaël; Garbuio, Lauric; Petit, Lionel; Richard, Claude; Guyomar, Daniel

2008-10-01

This paper presents a new technique for optimized energy harvesting using piezoelectric microgenerators called double synchronized switch harvesting (DSSH). This technique consists of a nonlinear treatment of the output voltage of the piezoelectric element. It also integrates an intermediate switching stage that ensures an optimal harvested power whatever the load connected to the microgenerator. Theoretical developments are presented considering either constant vibration magnitude, constant driving force, or independent extraction. Then experimental measurements are carried out to validate the theoretical predictions. This technique exhibits a constant output power for a wide range of load connected to the microgenerator. In addition, the extracted power obtained using such a technique allows a gain up to 500% in terms of maximal power output compared with the standard energy harvesting method. It is also shown that such a technique allows a fine-tuning of the trade-off between vibration damping and energy harvesting.

Superconductivity, Pairing Symmetry, and Disorder in the Doped Topological Insulator Sn 1-xIn xTe for x >= 0.10.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smylie, M. P.; Claus, H.; Kwok, W. -K.

The temperature dependence of the London penetration depth Delta lambda(T) in the superconducting doped topological crystalline insulator Sn1-xInxTe was measured down to 450 mK for two different doping levels, x approximate to 0.45 (optimally doped) and x approximate to 0.10 (underdoped), bookending the range of cubic phase in the compound. The results indicate no deviation from fully gapped BCS-like behavior, eliminating several candidate unconventional gap structures. Critical field values below 1 K and other superconducting parameters are also presented. The introduction of disorder by repeated particle irradiation with 5 MeV protons does not enhance T-c, indicating that ferroelectric interactions domore » not compete with superconductivity.« less

Transition métal—isolant dans V 1-xMn xO 2-2xF 2x (0 < x ≤ 0, 10)étude des propriétés structurales, magnétiques, etélectriques

NASA Astrophysics Data System (ADS)

Akroune, A.; Casalot, A.

1987-05-01

V 1- xMn xO 2-2 xF 2 x samples (0 < x ≤ 0, 10) have been prepared by solid state reaction in sealed platinium tubes. The metal ⇄ insulator transition occurs at a quickly decreasing temperatures as MnF 2 increases. The crystallographic, magnetic, transport properties, and DTA have been determined and discussed.

32 CFR 2003.10 - Approval, amendment, and publication of bylaws, rules, and procedures (Article X).

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Approval, amendment, and publication of bylaws, rules, and procedures (Article X). 2003.10 Section 2003.10 National Defense Other Regulations Relating... Bylaws § 2003.10 Approval, amendment, and publication of bylaws, rules, and procedures (Article X...

32 CFR 2003.10 - Approval, amendment, and publication of bylaws, rules, and procedures (Article X).

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Approval, amendment, and publication of bylaws, rules, and procedures (Article X). 2003.10 Section 2003.10 National Defense Other Regulations Relating... Bylaws § 2003.10 Approval, amendment, and publication of bylaws, rules, and procedures (Article X...

Magnetoelectric Energy Harvesting

DTIC Science & Technology

2014-11-20

materials to rotating or moving machinery , make it difficult to locate piezoelectric material devices in contact with the mechanical stress generator which...mechanical energy harvesting device and more particularly relates to such a device that has a magnetostrictive and piezoelectric component. (2...makes them a candidate as the active material in energy harvesting devices. By utilizing the direct piezoelectric (or pyroelectric) effect when

A 66pW Discontinuous Switch-Capacitor Energy Harvester for Self-Sustaining Sensor Applications

PubMed Central

Wu, Xiao; Shi, Yao; Jeloka, Supreet; Yang, Kaiyuan; Lee, Inhee; Sylvester, Dennis; Blaauw, David

2016-01-01

We present a discontinuous harvesting approach for switch capacitor DC-DC converters that enables ultra-low power energy harvesting. By slowly accumulating charge on an input capacitor and then transferring it to a battery in burst-mode, switching and leakage losses in the DC-DC converter can be optimally traded-off with the loss due to non-ideal MPPT operation. The harvester uses a 15pW mode controller, an automatic conversion ratio modulator, and a moving sum charge pump for low startup energy upon a mode switch. In 180nm CMOS, the harvester achieves >40% end-to-end efficiency from 113pW to 1.5μW with 66pW minimum input power, marking a >10× improvement over prior ultra-low power harvesters. PMID:28392977

Catchment hydro-biogeochemical response to forest harvest intensity and spatial pattern

EPA Science Inventory

We apply a new model, Visualizing Ecosystems for Land Management Assessment (VELMA), to Watershed 10 (WS10) in the H.J. Andrews Experimental Forest to simulate the effects of harvest intensity and spatial pattern on catchment hydrological and biogeochemical processes. Specificall...

Harvesting to get a Eucalyptus coppice crop

Treesearch

Thomas F. Geary

1983-01-01

Coppicing of eucalypts saves replanting after harvesting, but plan for coppice before planting seedlings. Select a species that coppices in the planned season of harvest; plan spacing and harvesting methods so that harvesting will not damage stumps; plan coppice management. Best coppice is produced by spring harvest with chain saws, low stumps, no bark or root damage,...

Photovoltaic characteristics of natural light harvesting dye sensitized solar cells

NASA Astrophysics Data System (ADS)

Hafez, H. S.; Shenouda, S. S.; Fadel, M.

2018-03-01

In this work of research, anthocyanin as a natural dye obtained from raspberry fruits, was used and tested as a photon harvesting/electron donating dye in titanium dioxide nanoparticle-based DSSCs. A working photoelectrode made from TiO2 nanoparticles with an average particle size (10-40 nm) that is coated on Florine doped tin-oxide substrate, was prepared via a simple and low cost hydrothermal method. A detailed structural and morphological analysis of the TiO2 photoactive electrode was investigated by X-ray diffraction (XRD), diffuse reflectance spectrometer, transmission electron microscope (TEM) and scanning electron microscope (SEM). Complete photovoltaic characteristics including (current, voltage, outpower, and responsivity) of the natural anthocyanin based dye sensitized solar cell have been investigated under different illumination intensity ranging from 10 to 100 mW.cm- 2. The cell responsivity and efficiency of the fabricated solar cell under different illumination intensity were found to be in the range (R = 15.6-23.8 mA.W- 1 and η = 0.13-0.25) at AM = 1.5 conditions. This study is important for enhancing the future applications of the promising DSSC technology.

Photovoltaic characteristics of natural light harvesting dye sensitized solar cells.

PubMed

Hafez, H S; Shenouda, S S; Fadel, M

2018-03-05

In this work of research, anthocyanin as a natural dye obtained from raspberry fruits, was used and tested as a photon harvesting/electron donating dye in titanium dioxide nanoparticle-based DSSCs. A working photoelectrode made from TiO 2 nanoparticles with an average particle size (10-40nm) that is coated on Florine doped tin-oxide substrate, was prepared via a simple and low cost hydrothermal method. A detailed structural and morphological analysis of the TiO 2 photoactive electrode was investigated by X-ray diffraction (XRD), diffuse reflectance spectrometer, transmission electron microscope (TEM) and scanning electron microscope (SEM). Complete photovoltaic characteristics including (current, voltage, outpower, and responsivity) of the natural anthocyanin based dye sensitized solar cell have been investigated under different illumination intensity ranging from 10 to 100mW.cm -2 . The cell responsivity and efficiency of the fabricated solar cell under different illumination intensity were found to be in the range (R=15.6-23.8mA.W -1 and η=0.13-0.25) at AM=1.5 conditions. This study is important for enhancing the future applications of the promising DSSC technology. Copyright © 2017 Elsevier B.V. All rights reserved.

A batch process micromachined thermoelectric energy harvester: fabrication and characterization

NASA Astrophysics Data System (ADS)

Su, J.; Leonov, V.; Goedbloed, M.; van Andel, Y.; de Nooijer, M. C.; Elfrink, R.; Wang, Z.; Vullers, R. J. M.

2010-10-01

Micromachined thermopiles are considered as a cost-effective solution for energy harvesters working at a small temperature difference and weak heat flows typical for, e.g., the human body. They can be used for powering autonomous wireless sensor nodes in a body area network. In this paper, a micromachined thermoelectric energy harvester with 6 µm high polycrystalline silicon germanium (poly-SiGe) thermocouples fabricated on a 6 inch wafer is presented. An open circuit voltage of 1.49 V and an output power of 0.4 µW can be generated with 3.5 K temperature difference in a model of a wearable micromachined energy harvester of the discussed design, which has a die size of 1.0 mm × 2.5 mm inside a watch-size generator.

A Miniature Magnetic-Force-Based Three-Axis AC Magnetic Sensor with Piezoelectric/Vibrational Energy-Harvesting Functions

PubMed Central

Hung, Chiao-Fang; Yeh, Po-Chen; Chung, Tien-Kan

2017-01-01

In this paper, we demonstrate a miniature magnetic-force-based, three-axis, AC magnetic sensor with piezoelectric/vibrational energy-harvesting functions. For magnetic sensing, the sensor employs a magnetic–mechanical–piezoelectric configuration (which uses magnetic force and torque, a compact, single, mechanical mechanism, and the piezoelectric effect) to convert x-axis and y-axis in-plane and z-axis magnetic fields into piezoelectric voltage outputs. Under the x-axis magnetic field (sine-wave, 100 Hz, 0.2–3.2 gauss) and the z-axis magnetic field (sine-wave, 142 Hz, 0.2–3.2 gauss), the voltage output with the sensitivity of the sensor are 1.13–26.15 mV with 8.79 mV/gauss and 1.31–8.92 mV with 2.63 mV/gauss, respectively. In addition, through this configuration, the sensor can harness ambient vibrational energy, i.e., possessing piezoelectric/vibrational energy-harvesting functions. Under x-axis vibration (sine-wave, 100 Hz, 3.5 g) and z-axis vibration (sine-wave, 142 Hz, 3.8 g), the root-mean-square voltage output with power output of the sensor is 439 mV with 0.333 μW and 138 mV with 0.051 μW, respectively. These results show that the sensor, using this configuration, successfully achieves three-axis magnetic field sensing and three-axis vibration energy-harvesting. Due to these features, the three-axis AC magnetic sensor could be an important design reference in order to develop future three-axis AC magnetic sensors, which possess energy-harvesting functions, for practical industrial applications, such as intelligent vehicle/traffic monitoring, processes monitoring, security systems, and so on. PMID:28208693

Nerve stripper-assisted sural nerve harvest.

PubMed

Hassanpour, Esmail; Yavari, Masoud; Karbalaeikhani, Ali; Saremi, Hossein

2014-03-01

Sural nerve has the favorite length and size for nerve graft interposition. Here two techniques, that is, "stocking seam" and "stair-step" or "stepladder," have been used for harvesting sural nerve. The first technique results in an unsightly scar at the posterior calf, and the latter one takes a long time to perform and exert undue traction to the graft during harvesting. The purpose of this article is to describe our experience in harvesting the sural nerve by a nerve stripper. A nerve stripper was used for harvesting sural nerve in 35 adult patients (in 6 patients, sural harvesting was done bilaterally), 27 men and 8 women. Thirty-one sural nerve harvests were done by closed technique (i.e., harvesting of sural nerve only by two incisions, one in the posterior of the lateral malleolus and the other in popliteal fossa), in 8 others by limited open technique, and in 2 cases, there was early laceration of the sural nerve at the beginning of the study. The contralateral sural nerve was harvested in one patient and medial antebrachial nerve in another by open technique. The mean length of the retrieved sural nerve was 34.5 cm in the closed technique group and 35 cm in the limited open technique group. We detected advancing Tinel's sign in all nerve stripper-assisted sural nerve harvested group members in both the closed and limited open groups. Sural nerve harvesting by the nerve stripper is a reliable and simple technique, and it is applicable as a routine technique. Applying controlled rotatory movements of the nerve stripper instead of pushing can result in satisfactory harvesting of the sural nerve without early laceration. Georg Thieme Verlag KG Stuttgart · New York.

An Optical and Infrared Time-domain Study of the Supergiant Fast X-Ray Transient Candidate IC 10 X-2

NASA Astrophysics Data System (ADS)

Kwan, Stephanie; Lau, Ryan M.; Jencson, Jacob; Kasliwal, Mansi M.; Boyer, Martha L.; Ofek, Eran; Masci, Frank; Laher, Russ

2018-03-01

We present an optical and infrared (IR) study of IC 10 X-2, a high-mass X-ray binary in the galaxy IC 10. Previous optical and X-ray studies suggest that X-2 is a Supergiant Fast X-ray Transient: a large-amplitude (factor of ∼100), short-duration (hours to weeks) X-ray outburst on 2010 May 21. We analyze R- and g-band light curves of X-2 from the intermediate Palomar Transient Factory taken between 2013 July 15 and 2017 February 14 that show high-amplitude (≳1 mag), short-duration (≲8 days) flares and dips (≳0.5 mag). Near-IR spectroscopy of X-2 from Palomar/TripleSpec show He I, Paschen-γ, and Paschen-β emission lines with similar shapes and amplitudes as those of luminous blue variables (LBVs) and LBV candidates (LBVc). Mid-IR colors and magnitudes from Spitzer/Infrared Array Camera photometry of X-2 resemble those of known LBV/LBVcs. We suggest that the stellar companion in X-2 is an LBV/LBVc and discuss possible origins of the optical flares. Dips in the optical light curve are indicative of eclipses from optically thick clumps formed in the winds of the stellar counterpart. Given the constraints on the flare duration (0.02–0.8 days) and the time between flares (15.1 ± 7.8 days), we estimate the clump volume filling factor in the stellar winds, f V , to be 0.01< {f}V< 0.71, which overlaps with values measured from massive star winds. In X-2, we interpret the origin of the optical flares as the accretion of clumps formed in the winds of an LBV/LBVc onto the compact object.

Structure and magnetic properties of Sm1-xZrx Fe10Si2 (x=0.2-0.6) alloys

NASA Astrophysics Data System (ADS)

Gjoka, M.; Sarafidis, C.; Psycharis, V.; Devlin, E.; Niarchos, D.; Hadjipanayis, G.

2017-10-01

Structure and magnetic properties of Sm1-xZrxFe10Si2 (0.1 ≤ x ≤ 0.6) alloys have been characterized using X-ray diffraction, thermomagnetic analysis and Mössbauer spectroscopy. The formation of the tetragonal ThMn12 -type structure was been observed in all alloys, without further annealing. The Curie temperature decreases linearly with Zr substitution from 322 °C for x=0.1 to 395 °C for x=0.6. Mössbauer spectroscopy showed the iron hyperfine field values decrease with increasing Zr content, and also confirmed changes to the magnetic anisotropy with increasing Zr content observed by XRD on oriented samples.

X-38 Experimental Aeroheating at Mach 10

NASA Technical Reports Server (NTRS)

Berry, Scott A.; Horvath, Thomas J.; Weilmuenster, K. James; Alter, Stephan J.; Merski, N. Ronald

2001-01-01

This report provides an update of the hypersonic aerothermodynamic wind tunnel test program conducted at the NASA Langley Research Center in support of the X-38 program. Global surface heat transfer distributions were measured on 0.0177 and 0.0236 scale models of the proposed X-38 configuration at Mach 10 in air. The parametrics that were investigated primarily include freestream unit Reynolds numbers of 0.6 to 2.2 million per foot and body flap deflections of 15, 20, and 25 deg for an angle-of-attack of 40 deg. The model-scale variance was tested to obtain laminar, transitional, and turbulent heating levels on the defected bodyflaps. In addition, a limited investigation of forced boundary layer transition through the use of discrete roughness elements was performed. Comparisons of the present experimental results to computational predictions and previous experimental data were conducted Laminar, transitional, and turbulent heating levels were observed on the deflected body flap, which compared favorably to the computational results and to the predicted heating based on the flight aerothermodynamic database.

The effects of shelterwood harvesting on oak regeneration two years after harvest in southern Ohio

Treesearch

James D. Downs; Roger A. Williams; Joni A. Downs

2011-01-01

This research examines the effects of two intensities of shelterwood harvesting (reduction of stocking levels to 50 and 70 percent of full stocking) on oak regeneration in southeastern Ohio 2 years after harvest. The main goal of this study is to develop an understanding of the relationship between residual stocking (harvesting intensity) and the successful release of...

Energy Harvesting Characteristics from Water Flow by Piezoelectric Energy Harvester Device Using Cr/Nb Doped Pb(Zr,Ti)O3 Bimorph Cantilever

NASA Astrophysics Data System (ADS)

Kim, Kyoung-Bum; Kim, Chang Il; Jeong, Young Hun; Cho, Jeong-Ho; Paik, Jong-Hoo; Nahm, Sahn; Lim, Jong Bong; Seong, Tae-Hyeon

2013-10-01

A water flow energy harvester, which can convert water flow energy to electric energy, was fabricated for its application to rivers. This harvester can generate power from the bending and releasing motion of piezoelectric bimorph cantilevers. A Pb(Zr0.54Ti0.46)O3 + 0.2 wt % Cr2O3 + 1.0 wt % Nb2O5 (PZT-CN) thick film and a 250-µm-thick stainless steel were used as a bimorph cantilever. The electrical impedance matching was achieved across a resistive load of 1 kΩ. Four bimorph cantilevers can generate power from 5 to 105 rpm. The output powers were steadily increased by increasing the rpm. The maximum output power was 68 mW by 105 rpm. It was found that the water flow energy harvester can generate 58 mW by a flow velocity of (2 m/s) from the stream with the four bimorph cantilevers.

Overview With Results and Lessons Learned of the X-43A Mach 10 Flight

NASA Technical Reports Server (NTRS)

Marshall, Laurie A.; Bahm, Catherine; Corpening, Griffin P.; Sherrill, Robert

2005-01-01

This paper provides an overview of the final flight of the NASA X-43A project. The project consisted of three flights, two planned for Mach 7 and one for Mach 10. The third and final flight, November 16, 2004, was the first Mach 10 flight demonstration of an airframe-integrated, scramjet-powered, hypersonic vehicle. The goals and objectives for the project as well as those for the third flight are presented. The configuration of the Hyper-X stack including the X-43A, Hyper-X launch vehicle, and Hyper-X research vehicle adapter is discussed. The second flight of the X-43A was successfully conducted on March 27, 2004. Mission differences, vehicle modifications and lessons learned from the second flight as they applied to the third flight are also discussed. An overview of flight 3 results is presented.

Harvesting cattail (Typha SPP) rhizomes as an alternative feedstock for alcohol production: modifications of potato harvester. Final report, July 1, 1981-December 31, 1982

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schertz, C.; Dubbe, D.; Pratt, D.

1983-03-01

The belowground portion of the cattail plant is a desirable alcohol fuel feedstock because of its high yield and sugar and starch content. Belowground yields of 22 Mt/hectare (10 tons/acre) with a sugar and starch content of 40% have been reported. In order to utilize this resource, a device must be developed to harvest it. The main objective of the project was to produce such a device based on existing harvesting technology which would be capable of removing and separating cattail rhizomes and shoot bases from the substrate in which they are growing. The device would eventually serve as amore » vital component of a harvesting machine for the entire plant. Associated objectives of this project included the gathering of information necessary to assess required draft forces, traction requirements, and soil moisture conditions.« less

Harvest season, high polluted season in East China

NASA Astrophysics Data System (ADS)

Huang, Xin; Song, Yu; Li, Mengmeng; Li, Jianfeng; Zhu, Tong

2012-12-01

East China, a major agricultural zone with a dense population, suffers from severe air pollution during June, the agricultural harvest season, every year. Crop burning emits tremendous amounts of combustion products into the atmosphere, not only rapidly degrading the local air quality but also affecting the tropospheric chemistry, threatening public health and affecting climate change. Recently, in mid-June 2012, crop fires left a thick pall of haze over East China. We evaluated the PM10, PM2.5 (particulates less than 10 and 2.5 μm in aerodynamic diameter) and BC (black carbon) emissions by analyzing detailed census data and moderate resolution imaging spectroradiometer (MODIS) remote sensing images and then simulated the consequent pollution using meteorological and dispersion models. The results show that the crop fires sweeping from the south to the north are responsible for the intensive air pollution during harvest season. It is necessary for scientists and governments to pay more attention to this issue.

Improved synthesis of ADAM10 inhibitor GI254023X.

PubMed

Hoettecke, Nicole; Ludwig, Andreas; Foro, Sabine; Schmidt, Boris

2010-01-01

The metalloproteinases ADAM10 and ADAM17 are involved in various diseases: neurodegeneration, cancer and inflammation. The inhibition of these proteases is a promising target in the treatment of inflammation and cancer. In this study, we present an improved synthesis of the ADAM10 reference inhibitor GI254023X with a higher overall yield, enhanced detection ability and increased acid stability, providing easier handling. This upscaled synthesis, free of diastereomeric intermediates, ensures single-batch identity, thus warranting its reproducibility in further biological investigations. 2010 S. Karger AG, Basel.

High-efficiency piezoelectric micro harvester for collecting low-frequency mechanical energy.

PubMed

Li, Xin; Song, Jinhui; Feng, Shuanglong; Xie, Xiong; Li, Zhenhu; Wang, Liang; Pu, Yayun; Soh, Ai Kah; Shen, Jun; Lu, Wenqiang; Liu, Shuangyi

2016-12-02

A single-layer zinc oxide (ZnO) nanorod array-based micro energy harvester was designed and integrated with a piezoelectric metacapacitor. The device presents outstanding low-frequency (1-10 Hz) mechanical energy harvesting capabilities. When compared with conventional pristine ZnO nanostructured piezoelectric harvesters or generators, both open-circuit potential and short-circuit current are significantly enhanced (up to 3.1 V and 124 nA cm -2 ) for a single mechanical knock (∼34 kPa). Higher electromechanical conversion efficiency (1.3 pC/Pa) is also observed. The results indicate that the integration of the piezoelectric metacapacitor is a crucial factor for improving the low-frequency energy harvesting performance. A double piezoelectric-driven mechanism is proposed to explain current higher output power, in which the metacapacitor plays the multiple roles of charge pumping, storing and transferring. An as-fabricated prototype device for lighting an LED demonstrates high power transference capability, with over 95% transference efficiency to the external load.

Fabrication and characterization of non-resonant magneto-mechanical low-frequency vibration energy harvester

NASA Astrophysics Data System (ADS)

Nammari, Abdullah; Caskey, Logan; Negrete, Johnny; Bardaweel, Hamzeh

2018-03-01

This article presents a non-resonant magneto-mechanical vibration energy harvester. When externally excited, the energy harvester converts vibrations into electric charge using a guided levitated magnet oscillating inside a multi-turn coil that is fixed around the exterior of the energy harvester. The levitated magnet is guided using four oblique mechanical springs. A prototype of the energy harvester is fabricated using additive manufacturing. Both experiment and model are used to characterize the static and dynamic behavior of the energy harvester. Measured restoring forces show that the fabricated energy harvester retains a mono-stable potential energy well with desired stiffness nonlinearities. Results show that magnetic spring results in hardening effect which increases the resonant frequency of the energy harvester. Additionally, oblique mechanical springs introduce geometric, negative, nonlinear stiffness which improves the harvester's response towards lower frequency spectrum. The unique design can produce a tunable energy harvester with multi-well potential energy characteristics. A finite element model is developed to estimate the average radial flux density experienced by the multi-turn coil. Also, a lumped parameter model of the energy harvester is developed and validated against measured data. Both upward and downward frequency sweeps are performed to determine the frequency response of the harvester. Results show that at higher excitation levels hardening effects become more apparent, and the system dynamic response turns into non-resonant. Frequency response curves exhibit frequency jump phenomena as a result of coexistence of multiple energy states at the frequency branch. The fabricated energy harvester is hand-held and measures approximately 100.5 [cm3] total volume. For a base excitation of 1.0 g [m/s2], the prototype generates a peak voltage and normalized power density of approximately 3.5 [V] and 0.133 [mW/cm3 g2], respectively, at 15.5 [Hz].

Harvesting microalgal biomass using submerged microfiltration membranes.

PubMed

Bilad, M R; Vandamme, D; Foubert, I; Muylaert, K; Vankelecom, Ivo F J

2012-05-01

This study was performed to investigate the applicability of submerged microfiltration as a first step of up-concentration for harvesting both a freshwater green algae species Chlorella vulgaris and a marine diatom Phaeodactylum tricornutum using three lab-made membranes with different porosity. The filtration performance was assessed by conducting the improved flux step method (IFM) and batch up-concentration filtrations. The fouling autopsy of the membranes was performed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR). The cost analysis was estimated based on the data of a related full-scale submerged membrane bioreactor (MBR). Overall results suggest that submerged microfiltration for algal harvesting is economically feasible. The IFM results indicate a low degree of fouling, comparable to the one obtained for a submerged MBR. By combining the submerged microfiltration with centrifugation to reach a final concentration of 22% w/v, the energy consumption to dewater C. vulgaris and P. tricornutum is 0.84 kW h/m(3) and 0.91 kW h/m(3), respectively. Copyright © 2012 Elsevier Ltd. All rights reserved.

50 CFR 100.6 - Licenses, permits, harvest tickets, tags, and reports.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 9 2012-10-01 2012-10-01 false Licenses, permits, harvest tickets, tags, and reports. 100.6 Section 100.6 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR (CONTINUED) NATIONAL WILDLIFE MONUMENTS SUBSISTENCE MANAGEMENT REGULATIONS FOR PUBLIC LANDS IN ALASKA General Provisions § 10...

Apex-4 for SpaceX CRS-10

NASA Image and Video Library

2017-02-16

APEX-04, or Advanced Plant EXperiments-04, is being prepared in a cold room in the Kennedy Space Center Processing Facility for SpaceX-10. Dr. Anna Lisa Paul of the University of Florida is the principal investigator for APEX-04. Apex-04 is an experiment involving Arabidopsis in petri plates inside the Veggie facility aboard the International Space Station. Since Arabidopsis is the genetic model of the plant world, it is a perfect sample organism for performing genetic studies in spaceflight. The experiment is the result of a grant from NASA’s Space Life and Physical Sciences division.

Review of magnetostrictive vibration energy harvesters

NASA Astrophysics Data System (ADS)

Deng, Zhangxian; Dapino, Marcelo J.

2017-10-01

The field of energy harvesting has grown concurrently with the rapid development of portable and wireless electronics in which reliable and long-lasting power sources are required. Electrochemical batteries have a limited lifespan and require periodic recharging. In contrast, vibration energy harvesters can supply uninterrupted power by scavenging useful electrical energy from ambient structural vibrations. This article reviews the current state of vibration energy harvesters based on magnetostrictive materials, especially Terfenol-D and Galfenol. Existing magnetostrictive harvester designs are compared in terms of various performance metrics. Advanced techniques that can reduce device size and improve performance are presented. Models for magnetostrictive devices are summarized to guide future harvester designs.

Kinetics and thermal stability of the Ni62Nb38- x Ta x ( x=5, 10, 15, 20 and 25) bulk metallic glasses

NASA Astrophysics Data System (ADS)

He, MengKe; Zhang, Yi; Xia, Lei; Yu, Peng

2017-07-01

We studied thermal stability and its relationship to the glass-forming ability (GFA) of the Ni62Nb38- x Ta x ( x=5, 10, 15, 20, 25) bulk metallic glasses (BMG) from a kinetic point of view. By fitting the heating-rate dependence of glass transition temperature ( T g onset) and crystallization temperatures ( T x onset and T x peak) of the Ni62Nb38- x Ta x BMG using the Vogel-Fulcher-Tammann (VFT) equation, we obtained the ideal glass transition and crystallization temperatures ( T g 0 and T x 0) and the fragility parameter ( m), and also constructed continuous heating transition (CHT) diagrams for crystallization of the BMG. The CHT diagrams of the BMG indicate enhanced thermal stability by Ta addition; the T g 0 as well as the T x 0 also illustrates this improved stability limit. The compositional dependence of m, which agrees well with that of the reduced glass-transition temperature, indicates a strong correlation between liquid fragility and glass-forming ability in the present alloy system. These results provide new evidence for understanding thermal stability, liquid fragility, and GFA in BMG.

Harvesting systems and costs for short rotation poplar

Treesearch

B. Rummer; D. Mitchell

2013-01-01

The objective of this review is to compare the cost of coppice and longer rotation poplar harvesting technology. Harvesting technology for short rotation poplar has evolved over the years to address both coppice harvest and single-stem harvest systems. Two potential approaches for coppice harvesting are modified forage harvesters and modified mulcher-balers. Both of...

[Immobilization of pectawamorine G10x by gel entrapment].

PubMed

Bogatskiĭ, A V; Davidenko, T I; Areshidze, I V; Gren', T A; Sevast'ianov, O V

1979-01-01

Polyacrylamide gel immobilization of pectawamorine G10x was investigated. Its pectinesterase and polygalacturonase activity and stability in storage were measured. The degree of pectawamorine binding during gel immobilization was 80--90%, 55% of initial activity being retained. Thermal stability of the immobilized and native preparations was equal. Pectinesterase activity of the gel immobilized enzyme increased during storage.

Tropospheric ozone enhancement during post-harvest crop-residue fires at two downwind sites of the Indo-Gangetic Plain.

PubMed

Kumari, Sonal; Verma, Nidhi; Lakhani, Anita; Tiwari, Suresh; Kandikonda, Maharaj Kumari

2018-05-01

In the present study, surface ozone (O 3 ), nitrogen oxides (NO x ), and carbon monoxide (CO) levels were measured at two sites downwind of fire active region in the Indo-Gangetic Plain (IGP): Agra (27.16° N, 78.08° E) and Delhi (28.37° N, 77.12° E) to study the impact of post-harvest crop-residue fires. The study period was classified into two groups: Pre-harvest period and Post-harvest period. During the post-harvest period, an enhancement of 17.3 and 31.7 ppb in hourly averaged O 3 mixing ratios was observed at Agra and Delhi, respectively, under similar meteorological conditions. The rate of change of O 3 was also higher in the post-harvest period by 56.2% in Agra and 39.5% in Delhi. Relatively higher O 3 episodic days were observed in the post-harvest period. Fire hotspots detected by Moderate Resolution Imaging Spectroradiometer (MODIS) along with backward air-mass trajectory analysis suggested that the enhanced O 3 and CO levels at the study sites during the post-harvest period could be attributed to crop-residue burning over the North-West IGP (NW-IGP). Satellite observations of surface CO mixing ratios and tropospheric formaldehyde (HCHO) column also showed higher levels during the post-harvest period. Graphical abstract.

A modified barbell-shaped PNN-PZT-PIN piezoelectric ceramic energy harvester

NASA Astrophysics Data System (ADS)

Gao, Xiangyu; Wu, Jingen; Yu, Yang; Dong, Shuxiang

2017-11-01

The quaternary system of relaxor-ferroelectric based Pb(Ni1/3Nb2/3)O3-Pb(ZrxTi1-x)O3-Pb(In0.5Nb0.5)O3 (PNN-PZT-PIN) piezoelectric ceramic at the morphotropic phase boundary was investigated via the solid reaction method. The optimized ceramic with excellent electric properties of ɛr = 8084, d33 = 977 pC/N, kp = 0.61, and Ec = 3.0 kV/cm was fabricated into d33-mode discs with separated surface electrodes, which were arranged in a series connection and, then as a piezo-stack, assembled into a barbell-shaped energy harvester that could bear a strong mechanical vibration. It is found that under a vibration mass-induced bending moment, the energy harvester produces an open circuit voltage of 26.4 Vp-p at the acceleration of 2.5 g at a load of 1.56 MΩ, which is two times higher in comparison to one without surface electrode separation. Its power output is 30 μW at the acceleration of 1 g and 104 μW at 2.5 g, which are even six times higher than that of a previously reported barbell-shaped energy harvester at room-temperature with the same acceleration. The enhanced power output can be attributed to (i) the excellent piezoelectric response of PNN-PZT-PIN ceramic and (ii) harvesting positive and negative charges from the separated surface electrodes other than a full surface electrode on piezoelectric discs under bending moment. Furthermore, the practical test was performed within a car engine, which shows that the PNN-PZT-PIN piezoelectric ceramic is a promising candidate for vibration energy harvesting.

Harvesting costs and environmental impacts associated with skyline yarding shelterwood harvests and thinning in Appalachian hardwoods

Treesearch

J. E. Baumgras; C. B. LeDoux; J. R. Sherar

1993-01-01

To evaluate the potential for moderating the visual impact and soil disturbance associated with timber harvesting on steep-slope hardwood sites, thinning and shelterwood harvests were conducted with a skyline yarding system. Operations were monitored to document harvesting production, residual stand damage, soil disturbance, and visual quality. Yarding costs for...

Electrochemically driven mechanical energy harvesting.

PubMed

Kim, Sangtae; Choi, Soon Ju; Zhao, Kejie; Yang, Hui; Gobbi, Giorgia; Zhang, Sulin; Li, Ju

2016-01-06

Efficient mechanical energy harvesters enable various wearable devices and auxiliary energy supply. Here we report a novel class of mechanical energy harvesters via stress-voltage coupling in electrochemically alloyed electrodes. The device consists of two identical Li-alloyed Si as electrodes, separated by electrolyte-soaked polymer membranes. Bending-induced asymmetric stresses generate chemical potential difference, driving lithium ion flux from the compressed to the tensed electrode to generate electrical current. Removing the bending reverses ion flux and electrical current. Our thermodynamic analysis reveals that the ideal energy-harvesting efficiency of this device is dictated by the Poisson's ratio of the electrodes. For the thin-film-based energy harvester used in this study, the device has achieved a generating capacity of 15%. The device demonstrates a practical use of stress-composition-voltage coupling in electrochemically active alloys to harvest low-grade mechanical energies from various low-frequency motions, such as everyday human activities.

Electrochemically driven mechanical energy harvesting

PubMed Central

Kim, Sangtae; Choi, Soon Ju; Zhao, Kejie; Yang, Hui; Gobbi, Giorgia; Zhang, Sulin; Li, Ju

2016-01-01

Efficient mechanical energy harvesters enable various wearable devices and auxiliary energy supply. Here we report a novel class of mechanical energy harvesters via stress–voltage coupling in electrochemically alloyed electrodes. The device consists of two identical Li-alloyed Si as electrodes, separated by electrolyte-soaked polymer membranes. Bending-induced asymmetric stresses generate chemical potential difference, driving lithium ion flux from the compressed to the tensed electrode to generate electrical current. Removing the bending reverses ion flux and electrical current. Our thermodynamic analysis reveals that the ideal energy-harvesting efficiency of this device is dictated by the Poisson's ratio of the electrodes. For the thin-film-based energy harvester used in this study, the device has achieved a generating capacity of 15%. The device demonstrates a practical use of stress-composition–voltage coupling in electrochemically active alloys to harvest low-grade mechanical energies from various low-frequency motions, such as everyday human activities. PMID:26733282

Harvesting small stems -- A Southern USA perspective

Treesearch

William F. Watson; Bryce J. Stokes

1989-01-01

Operations that harvest small stems using conventional equipment are discussed. A typical operation consists of rubber-tired feller-bunchers with shear heads, rubber-tired grapple skidders, and in-woods chippers. These systems harvest the small stems either in a pre-harvest, postharvest, or integrated-harvest method.

Flow Energy Piezoelectric Bimorph Nozzle Harvester

NASA Technical Reports Server (NTRS)

Walkemeyer, Phillip E. (Inventor); Tosi, Phillipe (Inventor); Corbett, Thomas Gary (Inventor); Hall, Jeffrey L. (Inventor); Lee, Hyeong Jae (Inventor); Arrazola, Alvaro Jose (Inventor); Sherrit, Stewart (Inventor); Colonius, Tim (Inventor); Kim, Namhyo (Inventor); Sun, Kai (Inventor)

2016-01-01

A flow energy harvesting device having a harvester pipe includes a flow inlet that receives flow from a primary pipe, a flow outlet that returns the flow into the primary pipe, and a flow diverter within the harvester pipe having an inlet section coupled to the flow inlet, a flow constriction section coupled to the inlet section and positioned at a midpoint of the harvester pipe and having a spline shape with a substantially reduced flow opening size at a constriction point along the spline shape, and an outlet section coupled to the constriction section. The harvester pipe may further include a piezoelectric structure extending from the inlet section through the constriction section and point such that the fluid flow past the constriction point results in oscillatory pressure amplitude inducing vibrations in the piezoelectric structure sufficient to cause a direct piezoelectric effect and to generate electrical power for harvesting.

Photocopy of photograph (this photograph is an 8x10 enlargement from ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of photograph (this photograph is an 8x10 enlargement from a 4x5 negative); United State Army Corps of Engineers, Savannah District, photographer unknown, November 1968: Aerial (alt 4000') view to south with complex in lower left - Fort Bragg, Noncommissioned Officers' Service Club, South of Butner Road, Fayetteville, Cumberland County, NC

Development and application of remote video monitoring system for combine harvester based on embedded Linux

NASA Astrophysics Data System (ADS)

Chen, Jin; Wang, Yifan; Wang, Xuelei; Wang, Yuehong; Hu, Rui

2017-01-01

Combine harvester usually works in sparsely populated areas with harsh environment. In order to achieve the remote real-time video monitoring of the working state of combine harvester. A remote video monitoring system based on ARM11 and embedded Linux is developed. The system uses USB camera for capturing working state video data of the main parts of combine harvester, including the granary, threshing drum, cab and cut table. Using JPEG image compression standard to compress video data then transferring monitoring screen to remote monitoring center over the network for long-range monitoring and management. At the beginning of this paper it describes the necessity of the design of the system. Then it introduces realization methods of hardware and software briefly. And then it describes detailedly the configuration and compilation of embedded Linux operating system and the compiling and transplanting of video server program are elaborated. At the end of the paper, we carried out equipment installation and commissioning on combine harvester and then tested the system and showed the test results. In the experiment testing, the remote video monitoring system for combine harvester can achieve 30fps with the resolution of 800x600, and the response delay in the public network is about 40ms.

SpaceX CRS-10 at Pad 39A

NASA Image and Video Library

2017-02-16

A Falcon 9 rocket stands ready for liftoff at the Kennedy Space Center's Launch Complex 39A. The historic launch site now is operated by SpaceX under a property agreement signed with NASA. The rocket will boost a Dragon resupply spacecraft to the International Space Station. Liftoff is scheduled for 10:01 a.m. EST on Feb. 18. On its 10th commercial resupply services mission to the space station, Dragon will bring up 5,000 pounds of supplies, such as the Stratospheric Aerosol and Gas Experiment (SAGE) III instrument to further study ozone in the atmosphere. Once mounted on the space station, SAGE III will measure the Earth’s sunscreen, or ozone, along with other gases and aerosols, or tiny particles in the atmosphere.

A Five-Year Assessment of Corn Stover Harvest in Central Iowa, USA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Douglas L. Karlen; Stuart J. Birell; J. Richard Hess

Sustainable feedstock harvest strategies are needed to ensure bioenergy production does not irreversibly degrade soil resources. The objective for this study was to document corn (Zea mays L.) grain and stover fraction yields, plant nutrient removal and replacement costs, feedstock quality, soil-test changes, and soil quality indicator response to four stover harvest strategies for continuous corn and a corn-soybean [Glycine max. (L.) Merr.] rotation. The treatments included collecting (1) all standing plant material above a stubble height of 10 cm (whole plant), (2) the upper-half by height (ear shank upward), (3) the lower-half by height (from the 10 cm stubblemore » height to just below the earshank), or (4) no removal. Collectable biomass from Treatment 2 averaged 3.9 ({+-}0.8) Mg ha{sup -1} for continuous corn (2005 through 2009), and 4.8 ({+-}0.4) Mg ha{sup -1} for the rotated corn (2005, 2007, and 2009). Compared to harvesting only the grain, collecting stover increased the average N-P-K removal by 29, 3 and 34 kg ha{sup -1} for continuous corn and 42, 3, and 34 kg ha{sup -1} for rotated corn, respectively. Harvesting the lower-half of the corn plant (Treatment 3) required two passes, resulted in frequent plugging of the combine, and provided a feedstock with low quality for conversion to biofuel. Therefore, Treatment 3 was replaced by a 'cobs-only' harvest starting in 2009. Structural sugars glucan and xylan accounted for up to 60% of the chemical composition, while galactan, arabinan, and mannose constituted less than 5% of the harvest fractions collected from 2005 through 2008. Soil-test data from samples collected after the first harvest (2005) revealed low to very low plant-available P and K levels which reduced soybean yield in 2006 after harvesting the whole-plant in 2005. Average continuous corn yields were 21% lower than rotated yields with no significant differences due to stover harvest. Rotated corn yields in 2009 showed some significant

Post-harvest field manipulations to conserve waste rice for waterfowl

USGS Publications Warehouse

Stafford, J.D.; Kaminski, R.M.; Reinecke, K.J.; Kurtz, M.E.; Manley, S.W.

2005-01-01

Rice seeds escaping collection by combines during harvest (hereafter, waste rice) provide quality forage for migrating and wintering waterfowl in the Lower Mississippi Alluvial Valley (MAV) and other rice growing regions in the United States. Recent sample surveys across the MAV have revealed abundance of waste rice in fields declined an average of 71% between harvest and late autumn. Thus, we evaluated the ability of common post-harvest, field-management practices to conserve waste rice for waterfowl until early winter via controlled experiments in Mississippi rice test plots in 2001 and 2003 and analyses of data from MAV-wide surveys of waste rice in rice production fields in 2000-2002. Our experiments indicated test plots with burned rice stubble that were not flooded during autumn contained more waste rice than other treatments in 2001 (P?0.10). Waste-rice abundance in test plots did not differ among postharvest treatments in 2003 (P = 0.97). Our analyses of data from the MAV sample surveys did not detect differences in abundance of waste rice among fields burned, rolled, disked, or left in standing stubble post-harvest (P?0.04; Bonferroni corrected critical ( a= 0.017). Because results from test-plot experiments were inconclusive, we based our primary inference regarding best post-harvest treatments on patterns of rice abundance identified from the MAV surveys and previously documented environmental and agronomic benefits of managing harvested rice fields for wintering waterfowl. Therefore, we recommend leaving standing stubble in rice fields after harvest as a preliminary beneficial management practice. We suggest future research evaluate potential of postharvest practices to conserve waste rice for waterfowl and reduce straw in production rice fields managed for wintering waterfowl throughout the MAV.

Long term performance of wearable transducer for motion energy harvesting

NASA Astrophysics Data System (ADS)

McGarry, Scott A.; Behrens, Sam

2010-04-01

Personal electronic devices such as cell phones, GPS and MP3 players have traditionally depended on battery energy storage technologies for operation. By harvesting energy from a person's motion, these devices may achieve greater run times without increasing the mass or volume of the electronic device. Through the use of a flexible piezoelectric transducer such as poly-vinylidene fluoride (PVDF), and integrating it into a person's clothing, it becomes a 'wearable transducer'. As the PVDF transducer is strained during the person's routine activities, it produces an electrical charge which can then be harvested to power personal electronic devices. Existing wearable transducers have shown great promise for personal motion energy harvesting applications. However, they are presently physically bulky and not ergonomic for the wearer. In addition, there is limited information on the energy harvesting performance for wearable transducers, especially under realistic conditions and for extended cyclic force operations - as would be experienced when worn. In this paper, we present experimental results for a wearable PVDF transducer using a person's measured walking force profile, which is then cycled for a prolonged period of time using an experimental apparatus. Experimental results indicate that after an initial drop in performance, the transducer energy harvesting performance does not substantially deteriorate over time, as less than 10% degradation was observed. Longevity testing is still continuing at CSIRO.

Hf 3 Fe 4 Sn 4 and Hf 9 Fe 4-x Sn 10+x : Two stannide intermetallics with low-dimensional iron sublattices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calta, Nicholas P.; Kanatzidis, Mercouri G.

2016-04-01

This article reports two new Hf-rich intermetallics synthesized using Sn flux: Hf 3Fe 4Sn 4 and Hf 9Fe 4-xSn 10+x. Hf 3Fe 4Sn 4 adopts an ordered variant the Hf 3Cu 8 structure type in orthorhombic space group Pnma with unit cell edges of a=8.1143(5) Å, b=8.8466(5) Å, and c=10.6069(6) Å. Hf 9Fe 4-xSn 10+x, on the other hand, adopts a new structure type in Cmc21 with unit cell edges of a=5.6458(3) Å, b=35.796(2) Å, and c=8.88725(9) Å for x=0. It exhibits a small amount of phase width in which Sn substitutes on one of the Fe sites. Both structuresmore » are fully three-dimensional and are characterized by pseudo one- and two-dimensional networks of Fe–Fe homoatomic bonding. Hf 9Fe 4-xSn 10+x exhibits antiferromagnetic order at TN=46(2) K and its electrical transport behavior indicates that it is a normal metal with phonon-dictated resistivity. Hf 3Fe 4Sn 4 is also an antiferromagnet with a rather high ordering temperature of TN=373(5) K. Single crystal resistivity measurements indicate that Hf 3Fe 4Sn 4 behaves as a Fermi liquid at low temperatures, indicating strong electron correlation.« less

Heat-related symptoms in sugarcane harvesters.

PubMed

Crowe, Jennifer; Nilsson, Maria; Kjellstrom, Tord; Wesseling, Catharina

2015-05-01

Exposure to heat stress is a documented risk for Central American sugarcane harvesters. However, little is known about heat-related illness in this population. This study examined the frequency of heat-related health effects among harvesters (n = 106) exposed to occupational heat stress compared to non-harvesters (n = 63). Chi-square test and gamma statistic were used to evaluate differences in self-reported symptoms and trends over heat exposure categories. Heat and dehydration symptoms (headache, tachycardia, muscle cramps, fever, nausea, difficulty breathing, dizziness, swelling of hands/feet, and dysuria) were experienced at least once per week significantly more frequently among harvesters. Percentages of workers reporting heat and dehydration symptoms increased in accordance with increasing heat exposure categories. A large percentage of harvesters are experiencing heat illness throughout the harvest demonstrating an urgent need for improved workplace practices, particularly in light of climate change and the epidemic of chronic kidney disease prevalent in this population. © 2015 Wiley Periodicals, Inc.

X-38 flies free from NASA's B-52 mothership, July 10, 2001

NASA Technical Reports Server (NTRS)

2001-01-01

The second free-flight test of an evolving series of X-38 prototypes took place July 10, 2001 when the X-38 was released from NASA's B-52 mothership over the Edwards Air Force Base range in California's Mojave Desert. Shortly after the photo was taken, a sequenced deployment of a drogue parachute followed by a large parafoil fabric wing slowed the X-38 to enable it to land safely on Rogers Dry Lake at Edwards. NASA engineers from the Dryden Flight Research Center at Edwards, and the Johnson Space Center, Houston, Texas, are developing a 'lifeboat' for the International Space Station based on X-38 research.

X-38 flies free from NASA's B-52 mothership, July 10, 2001

NASA Image and Video Library

2001-07-10

The second free-flight test of an evolving series of X-38 prototypes took place July 10, 2001 when the X-38 was released from NASA's B-52 mothership over the Edwards Air Force Base range in California's Mojave Desert. Shortly after the photo was taken, a sequenced deployment of a drogue parachute followed by a large parafoil fabric wing slowed the X-38 to enable it to land safely on Rogers Dry Lake at Edwards. NASA engineers from the Dryden Flight Research Center at Edwards, and the Johnson Space Center, Houston, Texas, are developing a "lifeboat" for the International Space Station based on X-38 research.

Flexible nano-GFO/PVDF piezoelectric-polymer nano-composite films for mechanical energy harvesting

NASA Astrophysics Data System (ADS)

Mishra, Monali; Roy, Amritendu; Dash, Sukalyan; Mukherjee, Somdutta

2018-03-01

Owing to the persistent quest of renewable energy technology, piezoelectric energy harvesters are gathering considerable research interest due to their potential in driving microelectronic devices with small power requirement. Electrical energy (milli to microwatt range) is generated from mechanical counterparts such as vibrations of machines, human motion, flowing water etc. based on the principles of piezoelectricity. Flexible high piezoelectric constant (d33) ceramic/polymer composites are crucial components for fabricating these energy harvesters. The polymer composites composed of gallium ferrite nanoparticles and polyvinylidene fluoride (PVDF) as the matrix have been synthesized by solvent casting method. First, 8 wt. % PVDF was dissolved in DMF and then different compositions of GaFeO3 or GFO (10, 20, 30 wt. %) (with respect to PVDF only) nanocomposites were synthesized. The phase of the synthesized nanocomposites were studied by X- Ray diffraction which shows that with the increase in the GFO concentration, the intensity of diffraction peaks of PVDF steadily decreased and GFO peaks became increasingly sharp. As the concentration of GFO increases in the PVDF polymer matrix, band gap is also increased albeit to a small extent. The maximum measured output voltage and current during mechanical pressing and releasing conditions were found to be ~ 3.5 volt and 4 nA, respectively in 30 wt % GFO-PVDF composite, comparable to the available literature.

Apex-4 for SpaceX CRS-10

NASA Image and Video Library

2017-02-16

APEX-04, or Advanced Plant EXperiments-04, is being prepared in a cold room in the Kennedy Space Center Processing Facility for SpaceX-10. The three science kits are weighed prior to flight. Dr. Anna Lisa Paul of the University of Florida is the principal investigator for APEX-04. Apex-04 is an experiment involving Arabidopsis in petri plates inside the Veggie facility aboard the International Space Station. Since Arabidopsis is the genetic model of the plant world, it is a perfect sample organism for performing genetic studies in spaceflight. The experiment is the result of a grant from NASA’s Space Life and Physical Sciences division.

Assessment of bias in US waterfowl harvest estimates

USGS Publications Warehouse

Padding, Paul I.; Royle, J. Andrew

2012-01-01

Context. North American waterfowl managers have long suspected that waterfowl harvest estimates derived from national harvest surveys in the USA are biased high. Survey bias can be evaluated by comparing survey results with like estimates from independent sources. Aims. We used band-recovery data to assess the magnitude of apparent bias in duck and goose harvest estimates, using mallards (Anas platyrhynchos) and Canada geese (Branta canadensis) as representatives of ducks and geese, respectively. Methods. We compared the number of reported mallard and Canada goose band recoveries, adjusted for band reporting rates, with the estimated harvests of banded mallards and Canada geese from the national harvest surveys. Weused the results of those comparisons to develop correction factors that can be applied to annual duck and goose harvest estimates of the national harvest survey. Key results. National harvest survey estimates of banded mallards harvested annually averaged 1.37 times greater than those calculated from band-recovery data, whereas Canada goose harvest estimates averaged 1.50 or 1.63 times greater than comparable band-recovery estimates, depending on the harvest survey methodology used. Conclusions. Duck harvest estimates produced by the national harvest survey from 1971 to 2010 should be reduced by a factor of 0.73 (95% CI = 0.71–0.75) to correct for apparent bias. Survey-specific correction factors of 0.67 (95% CI = 0.65–0.69) and 0.61 (95% CI = 0.59–0.64) should be applied to the goose harvest estimates for 1971–2001 (duck stamp-based survey) and 1999–2010 (HIP-based survey), respectively. Implications. Although this apparent bias likely has not influenced waterfowl harvest management policy in the USA, it does have negative impacts on some applications of harvest estimates, such as indirect estimation of population size. For those types of analyses, we recommend applying the appropriate correction factor to harvest estimates.

Possible secondary population-level effects of selective harvest of adult male muskoxen.

PubMed

Schmidt, Joshua H; Gorn, Tony S

2013-01-01

Selective harvest regimes are often focused on males resulting in skewed sex-ratios, and for many ungulate species this strategy is sustainable. However, muskoxen (Ovibos moschatus) are very social and mature bulls (≥4 years old), particularly prime-age bulls (6-10 years old), play important roles in predator defense and recruitment. A year-round social structure incorporating large males into mixed-sex groups could make this species more susceptible to the effects of selective harvest if population composition and sex-ratios influence overall survival and reproductive success. Using detailed data collected on the muskox population occupying the Seward Peninsula, Alaska during 2002-2012, we formulated the hypothesis that the selective harvest of mature bulls may be related to documented changes in population composition and growth rates in this species. In addition, we reviewed existing published information from two other populations in Alaska, the Cape Thompson and Northeastern populations, to compare population growth rates among the three areas under differential harvest rates relative to our hypothesis. We found that on the Seward Peninsula, mature bull:adult cow ratios declined 4-12%/year and short-yearling:adult cow ratios (i.e., recruitment) declined 8-9%/year in the most heavily harvested areas. Growth rates in all 3 populations decreased disproportionately after increases in the number of bulls harvested, and calf:cow ratios declined in the Northeastern population as harvest increased. While lack of appropriate data prevented us from excluding other potential causes such as density dependent effects and changes in predator densities, our results did align with our hypothesis, suggesting that in the interest of conservation, harvest of mature males should be restricted until causal factors can be more definitively identified. If confirmed by additional research, our findings would have important implications for harvest management and conservation of

1970 Oregon timber harvest.

Treesearch

Brian R. Wall

1971-01-01

The 1970 Oregon timber harvest of 7.98 billion board feet was the lowest recorded since the recession year of 1961 when 7.41 billion board feet of timber was produced. The 1970 log production figure was 12.8 percent below the 1969 harvest, the second consecutive year of declining production in Oregon.

Harvesting small trees and forest residues

Treesearch

Bryce J. Stokes

1992-01-01

Eight countries collaborated and shared technical information on the harvesting of small trees and forest residues in a three year program. Proceedings and reports from workshops and reviews are summarized in a review of activities and harvesting systems of the participating countries. Four databases were developed for harvesting and transportation of these materials...

Approaches to automated protein crystal harvesting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deller, Marc C., E-mail: mdeller@scripps.edu; Rupp, Bernhard, E-mail: mdeller@scripps.edu

Approaches to automated and robot-assisted harvesting of protein crystals are critically reviewed. While no true turn-key solutions for automation of protein crystal harvesting are currently available, systems incorporating advanced robotics and micro-electromechanical systems represent exciting developments with the potential to revolutionize the way in which protein crystals are harvested.

Harvest survivability of oak advanced regeneration

Treesearch

Jeff Stringer

2005-01-01

Natural regeneration of oak requires the occurrence of advance regeneration and/or stems capable of stump sprouting. These stems must be present before harvest and adequate numbers must survive harvest for oaks to successfully regenerate. Regeneration predictions are based on pre-harvest advance regeneration inventories. However, the use of these inventories does not...

Hybrid density functional study of band alignment in ZnO-GaN and ZnO-(Ga(1-x)Zn(x))(N(1-x)O(x))-GaN heterostructures.

PubMed

Wang, Zhenhai; Zhao, Mingwen; Wang, Xiaopeng; Xi, Yan; He, Xiujie; Liu, Xiangdong; Yan, Shishen

2012-12-05

The band alignment in ZnO-GaN and related heterostructures is crucial for uses in solar harvesting technology. Here, we report our density functional calculations of the band alignment and optical properties of ZnO-GaN and ZnO-(Ga(1-x)Zn(x))(N(1-x)O(x))-GaN heterostructures using a Heyd-Scuseria-Ernzerhof (HSE) hybrid functional. We found that the conventional GGA functionals underestimate not only the band gap but also the band offset of these heterostructures. Using the hybrid functional calculations, we show that the (Ga(1-x)Zn(x))(N(1-x)O(x)) solid solution has a direct band gap of about 2.608 eV, in good agreement with the experimental data. More importantly, this solid solution forms type-II band alignment with the host materials. A GaN-(Ga(1-x)Zn(x))(N(1-x)O(x))-ZnO core-shell solar cell model is presented to improve the visible light absorption ability and carrier collection efficiency.

Alternate biomass harvesting systems using conventional equipment

Treesearch

Bryce J. Stokes; William F. Watson; I. Winston Savelle

1985-01-01

Three harvesting methods were field tested in two stand types. Costs and stand utilization rates were developed for a conventional harvesting system, without energy wood recovery; a two-pass roundwood and energy wood system; and a one-pass system that harvests roundwood and energy wood. The systems harvested 20-acre test blocks in two pine pulpwood plantations and in a...

Red Pine Seedling Establishment after Shelterwood-Strip Harvesting

Treesearch

John W. Benzie; Alvin A. Alm

1977-01-01

Shelterwood-strip harvesting in a mature red pine stand provided favorable growing conditions for red pine seedlings established by planting nursery stock, by planting 10-week-old to 1-year-old tubelings, and by direct seeding. How long the shelterwood-strips can be left standing before they seriously affect seedling development to be determined

Maple Sugar Harvesting/Wild Rice Harvesting.

ERIC Educational Resources Information Center

Minneapolis Public Schools, MN.