Sample records for xanthan gum guar

  1. Effect of guar and xanthan gums on functional properties of mango (Mangifera indica) kernel starch.

    PubMed

    Nawab, Anjum; Alam, Feroz; Haq, Muhammad Abdul; Hasnain, Abid

    2016-12-01

    The effects of different concentrations of guar and xanthan gums on functional properties of mango kernel starch (MKS) were studied. Both guar and xanthan gum enhanced the water absorption of MKS. The addition of xanthan gum appeared to reduce the SP (swelling power) and solubility at higher temperatures while guar gum significantly enhanced the SP as well as solubility of MKS. The addition of both gums produced a reinforcing effect on peak viscosity of MKS as compared to control. Pasting temperature of MKS was higher than that of starch modified by gums indicating ease of gelatinization. Guar gum played an accelerative effect on setback but xanthan gum delayed the setback phenomenon during the cooling of the starch paste. Both gums were found to be effective in reducing the syneresis while gel firmness was markedly improved. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Influence of xanthan, guar, CMC and gum acacia on functional properties of water chestnut (Trapa bispinosa) starch.

    PubMed

    Lutfi, Zubala; Nawab, Anjum; Alam, Feroz; Hasnain, Abid; Haider, Syed Zia

    2017-10-01

    This study was performed to determine the effect of xanthan, guar, CMC and gum acacia on functional and pasting properties of starch isolated from water chestnut (Trapa bispinosa). Morphological properties of water chestnut starch with CMC were studied by scanning electron microscopy (SEM). The addition of hydrocolloids significantly enhanced the solubility of water chestnut starch (WCS) while reduced swelling power and freeze-thaw stability. The hydrophilic tendency of WCS was increased by xanthan gum; however, with addition of gum acacia it decreased significantly. Starch was modified with guar and gum acacia exhibited highest% syneresis. Guar gum was found to be effective in increasing the clarity of water chestnut starch paste. The addition of CMC significantly reduced the pasting temperature of WCS indicating ease of gelatinization. The setback was accelerated in the presence of xanthan gum but gum acacia delayed this effect during the cooling of the starch paste. Only xanthan gum was found to be effective in increasing breakdown showing good paste stability of WCS. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Application of guar-xanthan gum mixture as a partial fat replacer in meat emulsions.

    PubMed

    Rather, Sajad A; Masoodi, F A; Akhter, Rehana; Rather, Jahangir A; Gani, Adil; Wani, S M; Malik, A H

    2016-06-01

    The physicochemical, oxidative, texture and microstructure properties were evaluated for low fat meat emulsions containing varying levels of guar/xanthan gum mixture (1:1 ratio) as a fat substitute. Partial replacement of fat with guar/xanthan gum resulted in higher emulsion stability and cooking yield but lower penetration force. Proximate composition revealed that high fat control had significantly higher fat and lower moisture content due to the difference in basic formulation. Colour evaluation revealed that low fat formulations containing gum mixture had significantly lower lightness and higher yellowness values than high fat control formulation. However non-significant difference was observed in redness values between low fat formulations and the high fat control. The pH values of the low fat formulations containing gum mixture were lower than the control formulations (T0 and TC). The MetMb% of the high fat emulsion formulation was higher than low fat formulations. The significant increase of TBARS value, protein carbonyl groups and loss of protein sulphydryl groups in high fat formulation reflect the more oxidative degradation of lipids and muscle proteins during the preparation of meat emulsion than low fat formulations. The SEM showed a porous matrix in the treatments containing gum mixture. Thus, the guar/xanthan gum mixture improved the physicochemical and oxidative quality of low fat meat emulsions than the control formulations.

  4. Water adsorption isotherms of carboxymethyl cellulose, guar, locust bean, tragacanth and xanthan gums.

    PubMed

    Torres, María D; Moreira, Ramón; Chenlo, Francisco; Vázquez, María J

    2012-06-20

    Water adsorption isotherms of carboxymethyl cellulose (CMC), guar gum (GG), locust bean gum (LBG), tragacanth gum (TG) and xanthan gum (XG) were determined at different temperatures (20, 35, 50, and 65°C) using a gravimetric method. Several saturated salt solutions were selected to obtain different water activities in the range from 0.09 to 0.91. Water adsorption isotherms of tested hydrocolloids were classified like type II isotherms. In all cases, equilibrium moisture content decreased with increasing temperature at each water activity value. Three-parameter Guggenheim-Anderson-de Boer (GAB) model was employed to fit the experimental data in the water activity range and statistical analysis indicated that this model gave satisfactory results. CMC and GG were the most and the least hygroscopic gums, respectively. Sorption heats decreased with increasing moisture content. Monolayer moisture content evaluated with GAB model was consistent with equilibrium conditions of maximum stability calculated from thermodynamic analysis of net integral entropy. Values of equilibrium relative humidity at 20°C are proposed to storage adequately the tested gums. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Effect of organic matter on estuarine flocculation: a laboratory study using montmorillonite, humic acid, xanthan gum, guar gum and natural estuarine flocs.

    PubMed

    Furukawa, Yoko; Reed, Allen H; Zhang, Guoping

    2014-01-03

    Riverine particles undergo a rapid transformation when they reach estuaries. The rapid succession of hydrodynamic and biogeochemical regimes forces the particles to flocculate, settle and enter the sediment pool. The rates and magnitudes of flocculation depend on the nature of the particles which are primarily affected by the types and quantities of organic matter (OM). Meanwhile, the OM characteristics vary widely between environments, as well as within a single environment due to seasonal climate and land use variability. We investigated the effect of the OM types and quantities through laboratory experiments using natural estuarine particles from the Mississippi Sound and Atchafalaya Bay as well as model mixtures of montmorillonite and organic molecules (i.e., biopolymers (guar/xanthan gums) and humic acid). Biopolymers promote flocculation but the magnitude depends on the types and quantities. Nonionic guar gum yields much larger flocs than anionic xanthan gum, while both of them exhibit a nonlinear behavior in which the flocculation is the most pronounced at the intermediate OM loading. Moreover, the effect of guar gum is independent of salinity whereas the effect of xanthan gum is pronounced at higher salinity. Meanwhile, humic acid does not affect flocculation at all salinity values tested in this study. These results are echoed in the laboratory manipulation of the natural estuarine particles. Flocculation of the humic acid-rich Mississippi Sound particles is unaffected by the OM, whereas that of biopolymer-rich Atchafalaya Bay particles is enhanced by the OM. Flocculation is positively influenced by the presence of biopolymers that are produced as the result of marine primary production. Meanwhile, humic acid, which is abundant in the rivers that drain the agricultural soils of Southeastern United States, has little influence on flocculation. Thus, it is expected that humic acid-poor riverine particles (e.g., Mississippi River, and Atchafalaya River, to a

  6. Effect of organic matter on estuarine flocculation: a laboratory study using montmorillonite, humic acid, xanthan gum, guar gum and natural estuarine flocs

    PubMed Central

    2014-01-01

    Background Riverine particles undergo a rapid transformation when they reach estuaries. The rapid succession of hydrodynamic and biogeochemical regimes forces the particles to flocculate, settle and enter the sediment pool. The rates and magnitudes of flocculation depend on the nature of the particles which are primarily affected by the types and quantities of organic matter (OM). Meanwhile, the OM characteristics vary widely between environments, as well as within a single environment due to seasonal climate and land use variability. We investigated the effect of the OM types and quantities through laboratory experiments using natural estuarine particles from the Mississippi Sound and Atchafalaya Bay as well as model mixtures of montmorillonite and organic molecules (i.e., biopolymers (guar/xanthan gums) and humic acid). Results Biopolymers promote flocculation but the magnitude depends on the types and quantities. Nonionic guar gum yields much larger flocs than anionic xanthan gum, while both of them exhibit a nonlinear behavior in which the flocculation is the most pronounced at the intermediate OM loading. Moreover, the effect of guar gum is independent of salinity whereas the effect of xanthan gum is pronounced at higher salinity. Meanwhile, humic acid does not affect flocculation at all salinity values tested in this study. These results are echoed in the laboratory manipulation of the natural estuarine particles. Flocculation of the humic acid-rich Mississippi Sound particles is unaffected by the OM, whereas that of biopolymer-rich Atchafalaya Bay particles is enhanced by the OM. Conclusions Flocculation is positively influenced by the presence of biopolymers that are produced as the result of marine primary production. Meanwhile, humic acid, which is abundant in the rivers that drain the agricultural soils of Southeastern United States, has little influence on flocculation. Thus, it is expected that humic acid-poor riverine particles (e.g., Mississippi

  7. Intrinsic viscosity of binary gum mixtures with xanthan gum and guar gum: Effect of NaCl, sucrose, and pH.

    PubMed

    Bak, J H; Yoo, B

    2018-05-01

    The intrinsic viscosity ([η]) values of binary gum mixtures with xanthan gum (XG) and guar gum (GG) mixed with NaCl and sucrose at different concentrations as well as in the presence of different pH levels were examined in dilute solution as a function of XG/GG mixing ratio (100/0, 75/25, 50/50, and 0/100). Experimental values of concentration (C) and relative viscosity (η rel ) or specific viscosity (η sp ) of gums in dilute solution were fitted to five models to determine [η] values of binary gum mixtures including individual gums. A [η] model (η rel =1+[η]C) of Tanglertpaibul and Rao is recommended as the best model to estimate [η] values for the binary gum mixtures with XG and GG as affected by NaCl, sucrose, and pH. Overall, the synergistic interaction of XG-GG mixtures in the presence of NaCl and sucrose showed a greatly positive variation between measured and calculated values of [η]. In contrast, the binary gum mixtures showed synergy only under an acidic condition (pH3). These results suggest that the NaCl and sucrose addition or acidic condition appears to affect the intermolecular interaction occurred between XG and GG at different gum mixing ratios. Copyright © 2018 Elsevier B.V. All rights reserved.

  8. Effects of xanthan, guar, carrageenan and locust bean gum addition on physical, chemical and sensory properties of meatballs.

    PubMed

    Demirci, Zeynep Ozben; Yılmaz, Ismail; Demirci, Ahmet Şukru

    2014-05-01

    This study evaluated the effects of xanthan gum, guar gum, carrageenan and locust bean gum on physical, chemical and sensory properties of meatballs. Meatball samples were produced with three different formulations including of 0.5, 1, and 1.5% each gum addition and gum added samples were compared with the control meatballs. Physical and chemical analyses were carried out on raw and cooked samples separately. Moisture contents of raw samples decreased by addition of gums. There were significant decreases (p < 0.05) in moisture and fat contents of raw and cooked meatball samples formulated with gum when compared with control. Ash contents and texture values increased with gum addition to meatballs. Meatball redness decreased with more gum addition in raw and cooked meatball samples, which means that addition of gums resulted in a lighter-coloured product. According to sensory analysis results, locust bean gum added (1%) samples were much preferred by the panelists.

  9. Fluoroacetic acid in guar gum.

    PubMed

    Vartiainen, T; Gynther, J

    1984-04-01

    The toxicity of guar gum, derived from the Indian leguminous plant Cyamopsis tetragonolobus, is thought to be due to a globulin which can be denaturated and made non-toxic. Another very toxic compound, fluoroacetic acid, has been detected at a low level in raw samples of guar gum (0.07-1.42 micrograms fluoroacetic acid/g). A sample of a guar-gum pharmaceutical formulation contained only 0.08 ppm fluoroacetate. One exceptionally high value of 9.5 micrograms/g was found in a guar-gum powder. The low concentrations of fluoroacetate found in guar gum dispel any considerations about possible health risks associated with fluoroacetate during the prolonged use of guar gum at the recommended doses.

  10. 21 CFR 573.1010 - Xanthan gum.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.1010 Xanthan gum. The food additive xanthan gum may be safely used in animal feed as follows: (a) The food additive is xanthan gum as defined in § 172.695 of this chapter and meets all of the...

  11. 21 CFR 573.1010 - Xanthan gum.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.1010 Xanthan gum. The food additive xanthan gum may be safely used in animal feed as follows: (a) The food additive is xanthan gum as defined in § 172.695 of this chapter and meets all of the...

  12. 21 CFR 573.1010 - Xanthan gum.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.1010 Xanthan gum. The food additive xanthan gum may be safely used in animal feed as follows: (a) The food additive is xanthan gum as defined in § 172.695 of this chapter and meets all of the...

  13. 21 CFR 573.1010 - Xanthan gum.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.1010 Xanthan gum. The food additive xanthan gum may be safely used in animal feed as follows: (a) The food additive is xanthan gum as defined in § 172.695 of this chapter and meets all of the...

  14. 21 CFR 573.1010 - Xanthan gum.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.1010 Xanthan gum. The food additive xanthan gum may be safely used in animal feed as follows: (a) The food additive is xanthan gum as defined in § 172.695 of this chapter and meets all of the...

  15. Occupational allergic rhinitis from guar gum.

    PubMed

    Kanerva, L; Tupasela, O; Jolanki, R; Vaheri, E; Estlander, T; Keskinen, H

    1988-05-01

    Three cases of allergic rhinitis from a vegetable gum, guar gum, have been detected. Two subjects were exposed to fine guar gum powder (Emco Gum 563, Meyhall Chemical AG, Switzerland), an insulator in rubber cables, when opening cables in a power cable laboratory. After 1-2 years' exposure the patients developed rhinitis. Scratch-chamber tests, nasal provocation tests, nasal eosinophilia and a RAST test proved their allergy. A third subject developed allergic rhinitis from another guar gum product (Meyproid 5306, Meyhall Chemical AG) after 2 years' exposure in a paper factory. A positive skin test and nasal provocation test confirmed the diagnosis. A fourth case of possible allergy to guar gum after exposure to Meyproid 5306 in a paper factory is also presented. No final diagnosis was reached in this case (in 1974). The present subjects, only one of whom was atopic, developed allergy within 2 years, although their exposure to guar gum was not especially heavy. Therefore, when handling guar, adequate ventilation facilities should be provided and protective clothing, including a respiratory mask, should be worn.

  16. Rheological characterizations of concentrated binary gum mixtures with xanthan gum and galactomannans.

    PubMed

    Jo, Wonjun; Bak, June Ha; Yoo, Byoungseung

    2018-03-20

    The steady and dynamic shear rheological properties of binary gum mixtures with xanthan gum (XG) and galactomannans (guar gum (GG) and locust bean gum (LBG)) were examined in a concentrated solution (1% w/w) as a function of gum mixing ratio (100/0, 75/25, 50/50, and 0/100). All samples, except for individual GG and LBG, showed high shear-thinning behavior with yield stress. The values of flow (K, η a,50 , and σ oc ) and dynamic rheological parameters (G' and G″) of XG-GG and XG-LBG mixtures were significantly higher compared to XG alone, indicating that the flow and viscoelastic properties of binary gum mixtures were greatly affected by the addition of GG and LBG. The maximum elasticity synergistic interaction for XG-galactomannans mixtures was observed at a mixing ratio of 50/50, showing a greatly positive deviation between measured and calculated values of G'. These results suggest that the synergistic effect of GG and LBG addition on rheological properties of XG appears to be due to intermolecular interaction occurred between XG and galactomannans, as confirmed by dynamic rheological properties. Copyright © 2018 Elsevier B.V. All rights reserved.

  17. 21 CFR 582.7339 - Guar gum.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Guar gum. 582.7339 Section 582.7339 Food and Drugs..., AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7339 Guar gum. (a) Product. Guar gum. (b) Conditions of use. This substance is generally recognized as safe when used in...

  18. 21 CFR 582.7339 - Guar gum.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Guar gum. 582.7339 Section 582.7339 Food and Drugs..., AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7339 Guar gum. (a) Product. Guar gum. (b) Conditions of use. This substance is generally recognized as safe when used in...

  19. 21 CFR 184.1339 - Guar gum.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Guar gum. 184.1339 Section 184.1339 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Substances Affirmed as GRAS § 184.1339 Guar gum. (a) Guar gum is the natural substance obtained from the...

  20. 21 CFR 582.7339 - Guar gum.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Guar gum. 582.7339 Section 582.7339 Food and Drugs..., AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7339 Guar gum. (a) Product. Guar gum. (b) Conditions of use. This substance is generally recognized as safe when used in...

  1. 21 CFR 184.1339 - Guar gum.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Guar gum. 184.1339 Section 184.1339 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Substances Affirmed as GRAS § 184.1339 Guar gum. (a) Guar gum is the natural substance obtained from the...

  2. Occupational asthma caused by guar gum.

    PubMed

    Lagier, F; Cartier, A; Somer, J; Dolovich, J; Malo, J L

    1990-04-01

    Some vegetable gums have been reported to cause asthma. We describe three subjects who were exposed at work to guar gum, which is derived from the outer part of Cyanopsis tetragonolobus, a vegetable that grows in India. The first subject worked for a pharmaceutical company; the second and third subjects worked at a carpet-manufacturing plant. All three subjects developed symptoms of rhinitis and asthma after the onset of exposure to guar gum. All subjects were atopic and demonstrated mild bronchial hyperresponsiveness to inhaled histamine at the time they were observed. Skin prick tests demonstrated an immediate skin reaction to guar gum. All three subjects had high levels of serum IgE antibodies to guar gum. Specific inhalation challenges in which the three subjects were exposed for short intervals (less than or equal to 4 minutes) to powder of guar gum elicited isolated immediate bronchospastic reactions in two subjects and a dual reaction in the other subject.

  3. 76 FR 44811 - Carboxymethyl Guar Gum Sodium Salt and Carboxymethyl-Hydroxypropyl Guar; Exemption From the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-27

    ... Guar Gum Sodium Salt and Carboxymethyl- Hydroxypropyl Guar; Exemption From the Requirement of a... establishes an exemption from the requirement of a tolerance for residues of carboxymethyl guar gum sodium... carboxymethyl guar gum sodium salt and carboxymethyl- hydroxypropyl guar. DATES: This regulation is effective...

  4. Colon targeted curcumin delivery using guar gum.

    PubMed

    Elias, Edwin J; Anil, Singhal; Ahmad, Showkat; Daud, Anwar

    2010-06-01

    Curcumin is used in the treatment of colon cancer, but its very poor absorption in the upper part of the GIT is a major concern. As a site for drug delivery, the colon offers a near neutral pH, reduced digestive enzymatic activity, a long transit time and an increased responsiveness to absorption enhancers. The aim of the present study was to identify a suitable polymer (guar gum) based matrix tablet for curcumin with sufficient mechanical strength and promising in vitro mouth-to-colon release profile. Three formulations of curcumin were prepared using varying concentrations of guar gum containing 50 mg curcumin by the wet granulation method. Tablets were subjected to evaluation by studying parameter like hardness, friability, drug content uniformity, and in-vitro drug release. In vitro drug release was evaluated using simulated stomach, intestinal and colonic fluids. The susceptibility of guar gum to colonic bacteria was also assessed by a drug release study with rat caecal contents. The 40% guar gum containing formulation (F-1) showed better drug release (91.1%) after 24 hours in the presence of rat caecal contents in comparison with the 50% guar gum containing formulation (F-2) (82.1%). Curcumin could, thus, be positively delivered to the colon for effective colon cancer treatment using guar gum.

  5. Thiol derivatization of Xanthan gum and its evaluation as a mucoadhesive polymer.

    PubMed

    Bhatia, Meenakshi; Ahuja, Munish; Mehta, Heena

    2015-10-20

    Thiol-derivatization of xanthan gum polysaccharide was carried out by esterification with mercaptopropionic acid and thioglycolic acid. Thiol-derivatization was confirmed by Fourier-transformed infra-red spectroscopy. Xanthan-mercaptopropionic acid conjugate and xanthan-thioglycolic acid conjugate were found to possess 432.68mM and 465.02mM of thiol groups as determined by Ellman's method respectively. Comparative evaluation of mucoadhesive property of metronidazole loaded buccal pellets of xanthan and thiolated xanthan gum using chicken buccal pouch membrane revealed higher ex vivo bioadhesion time of thiolated xanthan gum as compared to xanthan gum. Improved mucoadhesive property of thiolated xanthan gum over the xanthan gum can be attributed to the formation of disulfide bond between mucus and thiolated xanthan gum. In vitro release study conducted using phosphate buffer (pH 6.8) revealed a sustained release profile of metronidazole from thiolated xanthan pellets as compared to xanthan pellets. In conclusion, thiolation of xanthan improves its mucoadhesive property and sustained the release of metronidazole over a prolonged period. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. 21 CFR 582.7339 - Guar gum.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Guar gum. 582.7339 Section 582.7339 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7339 Guar gum. (a...

  7. 21 CFR 582.7339 - Guar gum.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Guar gum. 582.7339 Section 582.7339 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7339 Guar gum. (a...

  8. Biobased alternatives to guar gum as tackifiers for hydromulch

    USDA-ARS?s Scientific Manuscript database

    Guar gum, obtained from guar [Cyamopsis tetragonoloba (L.) Taub.] seeds, is currently the principal gum used as a tackifier (binder) for hydraulically-applied mulches (hydromulches) used in erosion control. The oil industry’s increased use of guar gum in hydraulic fracturing together with lower glo...

  9. Radiation induced degradation of xanthan gum in aqueous solution

    NASA Astrophysics Data System (ADS)

    Hayrabolulu, Hande; Demeter, Maria; Cutrubinis, Mihalis; Güven, Olgun; Şen, Murat

    2018-03-01

    In our previous study, we have investigated the effect of gamma rays on xanthan gum in the solid state and it was determined that dose rate was an important factor effecting the radiation degradation of xanthan gum. In the present study, in order to provide a better understanding of how ionizing radiation effect xanthan gum, we have investigated the effects of ionizing radiation on aqueous solutions of xanthan at various concentrations (0.5-4%). Xanthan solutions were irradiated with gamma rays in air, at ambient temperature, at different dose rates (0.1-3.3-7.0 kGy/h) and doses (2.5-50 kGy). Change in their molecular weights was followed by size exclusion chromatography (SEC). Chain scission yield (G(S)), and degradation rate constants (k) were calculated. It was determined that, solution concentration was a factor effecting the degradation chemical yield and degradation rate of xanthan gum. Chain scission reactions were more effective for lower solution concentrations.

  10. Guar gum: processing, properties and food applications-A Review.

    PubMed

    Mudgil, Deepak; Barak, Sheweta; Khatkar, Bhupendar Singh

    2014-03-01

    Guar gum is a novel agrochemical processed from endosperm of cluster bean. It is largely used in the form of guar gum powder as an additive in food, pharmaceuticals, paper, textile, explosive, oil well drilling and cosmetics industry. Industrial applications of guar gum are possible because of its ability to form hydrogen bonding with water molecule. Thus, it is chiefly used as thickener and stabilizer. It is also beneficial in the control of many health problems like diabetes, bowel movements, heart disease and colon cancer. This article focuses on production, processing, composition, properties, food applications and health benefits of guar gum.

  11. Mango kernel starch-gum composite films: Physical, mechanical and barrier properties.

    PubMed

    Nawab, Anjum; Alam, Feroz; Haq, Muhammad Abdul; Lutfi, Zubala; Hasnain, Abid

    2017-05-01

    Composite films were developed by the casting method using mango kernel starch (MKS) and guar and xanthan gums. The concentration of both gums ranged from 0% to 30% (w/w of starch; db). Mechanical properties, oxygen permeability (OP), water vapor permeability (WVP), solubility in water and color parameters of composite films were evaluated. The crystallinity and homogeneity between the starch and gums were also evaluated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The scanning electron micrographs showed homogeneous matrix, with no signs of phase separation between the components. XRD analysis demonstrated diminished crystalline peak. Regardless of gum type the tensile strength (TS) of composite films increased with increasing gum concentration while reverse trend was noted for elongation at break (EAB) which found to be decreased with increasing gum concentration. The addition of both guar and xanthan gums increased solubility and WVP of the composite films. However, the OP was found to be lower than that of the control with both gums. Furthermore, addition of both gums led to changes in transparency and opacity of MKS films. Films containing 10% (w/w) xanthan gum showed lower values for solubility, WVP and OP, while film containing 20% guar gum showed good mechanical properties. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Application of xanthan gum as polysaccharide in tissue engineering: A review.

    PubMed

    Kumar, Anuj; Rao, Kummara Madhusudana; Han, Sung Soo

    2018-01-15

    Xanthan gum is a microbial high molecular weight exo-polysaccharide produced by Xanthomonas bacteria (a Gram-negative bacteria genus that exhibits several different species) and it has widely been used as an additive in various industrial and biomedical applications such as food and food packaging, cosmetics, water-based paints, toiletries, petroleum, oil-recovery, construction and building materials, and drug delivery. Recently, it has shown great potential in issue engineering applications and a variety of modification methods have been employed to modify xanthan gum as polysaccharide for this purpose. However, xanthan gum-based biomaterials need further modification for several targeted applications due to some disadvantages (e.g., processing and mechanical performance of xanthan gum), where modified xanthan gum will be well suited for tissue engineering products. In this review, the current scenario of the use of xanthan gum for various tissue engineering applications, including its origin, structure, properties, modification, and processing for the preparation of the hydrogels and/or the scaffolds is precisely reviewed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Partially hydrolyzed guar gum as a potential prebiotic source.

    PubMed

    Mudgil, Deepak; Barak, Sheweta; Patel, Ami; Shah, Nihir

    2018-06-01

    Guar galactomannan was enzymatically hydrolyzed to obtain partially hydrolyzed guar gum which can be utilized as prebiotic source. In present study, growth of probiotics (Lactic Acid Bacteria strains) were studied with glucose, partially hydrolyzed guar gum and native guar gum. All the six strains were galactose &/or mannose positive using the API CHl 50 test. Almost all these strains showed an ability to assimilate partially hydrolyzed guar gum with respect to increase in optical density and viable cell count with concomitant decrease in the pH of the growth medium. Streptococcus thermophilus MD2 exhibited higher growth (7.78 log cfu/ml) while P. parvulus AI1 showed comparatively less growth (7.24 log cfu/ml) as compared to used lactobacillus and Weissella strains. Outcomes of the current study suggest that partially hydrolyzed guar can be considered as potential prebiotic compound that may further stimulate the growth of potentially probiotic bacteria or native gut microflora. Copyright © 2018 Elsevier B.V. All rights reserved.

  14. Effect of enzymatic depolymerization on physicochemical and rheological properties of guar gum.

    PubMed

    Mudgil, Deepak; Barak, Sheweta; Khatkar, B S

    2012-09-01

    Depolymerization of guar gum using enzymatic hydrolysis was performed to obtain depolymerized guar gum having functional application as soluble dietary fiber. Enzymatic hydrolysis of guar gum significantly affected the physicochemical and rheological characteristics of guar gum. The depolymerized guar gum showed a significant increase in crystallinity index from 3.86% to 13.2% and flow behavior index from 0.31 to 1.7 as compared to native guar gum. Remarkable decrease in intrinsic viscosity and consistency index was also observed from 9 to 0.28 and 4.04 to 0.07, respectively. Results revealed that enzymatic hydrolysis of guar gum resulted in a polysaccharide with low degree of polymerization, viscosity and consistency which could make it useful for incorporation in food products as dietary fiber without affecting the rheology, consistency and texture of the products. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Antioxidant Effect of Xanthan Gum on Ram Sperm after Freezing and Thawing.

    PubMed

    Gastal, G DA; Silva, E F; Mion, B; Varela Junior, A S; Rosa, C E; Corcini, C D; Mondadori, R G; Vieira, A D; Bianchi, I; Lucia, T

    Xanthan gum is used as thickener in media to preserve food products, having cryoprotectant and antioxidant properties that may be relevant for sperm cryopreservation. To evaluate the effects of adding xanthan gum to freezing extenders on post-thawing quality and oxidant activity of ram sperm. Ejaculates from seven rams extended TRIS-egg yolk-glycerol were split in three treatments including xanthan gum (0.15%; 0.20%; and 0.25%) and a control with no xanthan gum. After thawing, motility and production of reactive oxygen species (ROS) with 0.20% and 0.25% xanthan gum were lower than for the control (P < 0.05), but mitochondrial functionality and integrity of membrane, acrosome and DNA did not differ (P > 0.05). Xanthan gum at 0.20% and 0.25% may be an efficient antioxidant for frozen-thawed ram sperm, due to the reduction in ROS production.

  16. Effect of guar gum added to the diet of patients with duodenal ulcer.

    PubMed

    Harju, E J; Larmi, T K

    1985-01-01

    In a randomized, double-blind, controlled clinical study, the effects of 5 g of guar gum, a dietary fiber composed of galactose and mannose, or placebo added to the diet of 20 patients with duodenal ulcer for 1 wk each were examined. Ten patients derived evident benefit and five some help from guar gum, on comparing symptoms during administration of guar gum with those experienced earlier or during the placebo week, whereas four patients found that neither guar gum nor placebo had any effect (p less than 0.001). The beneficial effect was associated with increased feelings of repletion after meals. Patients with fewest symptoms benefited only slightly, or not at all, from guar gum. In one patient, guar gum abolished pain felt earlier and on placebo, but also caused severe gastric retention after meals. This patient had pyloric stenosis. In patients who were intolerant to berries, fruits, sugar, sweet rolls, and pizza these foodstuffs were better tolerated during guar gum administration. The diarrhea which occurs in some patients ingesting guar gum was avoided by giving low initial doses. In three patients unpalatability of guar gum was a minor complaint. It is concluded that guar gum is helpful to many patients with uncomplicated duodenal ulcer, but that it is harmful to those having increased gastric emptying, eg, pyloric stenosis patients, and that guar gum may exert its effects by increasing gastric emptying time.

  17. 78 FR 43226 - Xanthan Gum From Austria and China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-19

    ... Austria and China Determinations On the basis of the record \\1\\ developed in the subject investigations... injury by reason of imports from China of xanthan gum provided for in subheading 3913.90.20 of the... China of xanthan gum. Background The Commission instituted these investigations effective June 5, 2012...

  18. Determination of locust bean gum and guar gum by polymerase chain reaction and restriction fragment length polymorphism analysis.

    PubMed

    Meyer, K; Rosa, C; Hischenhuber, C; Meyer, R

    2001-01-01

    A polymerase chain reaction (PCR) was developed to differentiate the thickening agents locust bean gum (LBG) and the cheaper guar gum in finished food products. Universal primers for amplification of the intergenic spacer region between trnL 3' (UAA) exon and trnF (GAA) gene in the chloroplast (cp) genome and subsequent restriction analysis were applied to differentiate guar gum and LBG. The presence of <5% (w/w) guar gum powder added to LBG powder was detectable. Based on data obtained from sequencing this intergenic spacer region, a second PCR method for the specific detection of guar gum DNA was also developed. This assay detected guar gum powder in LBG in amounts as low as 1% (w/w). Both methods successfully detected guar gum and/or LBG in ice cream stabilizers and in foodstuffs, such as dairy products, ice cream, dry seasoning mixes, a finished roasting sauce, and a fruit jelly product, but not in products with highly degraded DNA, such as tomato ketchup and sterilized chocolate cream. Both methods detected guar gum and LBG in ice cream and fresh cheese at levels <0.1%.

  19. Ultrasound assisted enzymatic depolymerization of aqueous guar gum solution.

    PubMed

    Prajapat, Amrutlal L; Subhedar, Preeti B; Gogate, Parag R

    2016-03-01

    The present work investigates the effectiveness of application of low intensity ultrasonic irradiation for the intensification of enzymatic depolymerization of aqueous guar gum solution. The extent of depolymerization of guar gum has been analyzed in terms of intrinsic viscosity reduction. The effect of ultrasonic irradiation on the kinetic and thermodynamic parameters related to the enzyme activity as well as the intrinsic viscosity reduction of guar gum using enzymatic approach has been evaluated. The kinetic rate constant has been found to increase with an increase in the temperature and cellulase loading. It has been observed that application of ultrasound not only enhances the extent of depolymerization but also reduces the time of depolymerization as compared to conventional enzymatic degradation technique. In the presence of cellulase enzyme, the maximum extent of depolymerization of guar gum has been observed at 60 W of ultrasonic rated power and ultrasonic treatment time of 30 min. The effect of ultrasound on the kinetic and thermodynamic parameters as well as the molecular structure of cellulase enzyme was evaluated with the help of the chemical reaction kinetics model and fluorescence spectroscopy. Application of ultrasound resulted in a reduction in the thermodynamic parameters of activation energy (Ea), enthalpy (ΔH), entropy (ΔS) and free energy (ΔG) by 47%, 50%, 65% and 1.97%, respectively. The changes in the chemical structure of guar gum treated using ultrasound assisted enzymatic approach in comparison to the native guar gum were also characterized by FTIR. The results revealed that enzymatic depolymerization of guar gum resulted in a polysaccharide with low degree of polymerization, viscosity and consistency index without any change in the core chemical structure which could make it useful for incorporation in food products. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Potential utilization of guar gum industrial waste in vermicompost production.

    PubMed

    Suthar, Surendra

    2006-12-01

    Recycling of guar gum industrial waste through vermitechnology was studied under laboratory conditions by using composting earthworm Perionyx excavatus (Perrier). Three different combination of guar gum industrial waste namely guar gum industrial waste:cow dung:saw dust in 40:30:30 ratio (T1), guar gum industrial waste:cow dung:saw dust in 60:20:20 ratio (T2), and guar gum industrial waste:cow dung:saw dust in 75:15:10 ratio (T3) were used for vermicomposting experiments. Chemical changes during vermicomposting were measured and comparatively T2 showed great increase (from its initial level) for total N (25.4%), phosphorus (72.8%) and potassium (20.9%) than the other treatments. T2 also showed higher vermicomposting coefficient (VC), higher mean biomass for P. excavatus (146.68 mg) and higher cocoon production (about 21.9% and 645.5% more than the T1 and T3, respectively). Maximum earthworm mortality during vermicomposting was recorded with T3 treatment while zero mortality was recorded for T2 treatment after 150 days. Overall, T2 treatment appeared to be an ideal combination for enhancing maximum biopotential of earthworms to management guar gum industrial waste as well as for earthworm biomass and cocoon production.

  1. Dietary guar gum effects on postprandial blood glucose, insulin and hydroxyproline in humans.

    PubMed

    Torsdottir, I; Alpsten, M; Andersson, H; Einarsson, S

    1989-12-01

    Meals (425 kcal) containing various doses of guar gum (0, 2.5, 7.5 or 12.5 g) were ingested by nine healthy male subjects after a 12-h fast. The rise in blood glucose was higher after the control meal without guar gum than after the guar gum-containing meals, which all gave a similar rise in glucose. In contrast, increased doses of guar gum led to a greater reduction in the postprandial rise in insulin. The postprandial increase in serum hydroxyproline, an amino acid added to all meals, was decreased in a similar manner by all of the guar gum doses. Gastric emptying was measured after the control meal without guar gum and the meal containing 12.5 g of guar gum by monitoring 51Cr, which was added to the meals. Guar gum was found to reduce the variation between individuals, as well as the initial rate of gastric emptying, which correlated with changes in both serum hydroxyproline (rs = 0.93, P less than 0.01) and blood glucose (rs = 0.83, P less than 0.01). The effectiveness of guar gum in reducing postprandial response was lost after heating and homogenization for canning. A threshold in the reduction in rise of glucose or hydroxyproline was reached with the lowest dose (2.5 g) of viscous guar gum; larger doses had no additional effects. The reduced absorption seems to be an effect of a slower gastric emptying rate.

  2. Selective depression behavior of guar gum on talc-type scheelite flotation

    NASA Astrophysics Data System (ADS)

    Zhang, Yong-zhong; Gu, Guo-hua; Wu, Xiang-bin; Zhao, Kai-le

    2017-08-01

    The depression behavior and mechanism of guar gum on talc-type scheelite flotation were systematically investigated by flotation experiments, adsorption tests, zeta-potential measurements, and infrared spectroscopic analyses. The flotation results for monominerals, mixed minerals, and actual mineral samples indicated that guar gum exhibited much higher selective depression for talc than for scheelite. Bench-scale closed-circuit tests showed that a tungsten concentrate with a WO3 grade of 51.43% and a WO3 recovery of 76.18% was obtained. Adsorption tests, zeta-potential measurements, and infrared spectral analyses confirmed that guar gum absorbed more strongly onto the talc surface than onto the scheelite surface because of chemisorption between guar gum and talc. This chemisorption is responsible for the guar gum's highly selective depression for talc and small depression for scheelite. The flotation results provide technical support for talc-type scheelite flotation.

  3. Synthesis and characterization of grafting polystyrene from guar gum using atom transfer radical addition.

    PubMed

    Yang, Yang; Chen, Fu; Chen, Qi; He, Jie; Bu, Tao; He, Xuemei

    2017-11-15

    To broaden the application fields for guar gum, this natural polymer is often grafted to/from the surface to modify its properties. Polystyrene-guar gum (PS-guar gum) is successfully synthesized using atom transfer radical addition based n-BuBr(C 4 H 9 Br), Cu(I)Cl and N,N,N',N″,N‴-penthamethyldiethylenetriamine (C 9 H 23 N 3 ,PMDETA) as initiator, electronating agent and ligand respectively in an inert atmosphere. The graft copolymer is characterized by FT-IR, 1 H NMR, XRD and scanning electron microscope (SEM). The results show that styrene is successfully introduced onto guar gum and particles of PS-guar gum adopt a disordered morphology with diameters of 100nm, and PS-guar gum are largely amorphous with poor crystallinity. Besides, add on shows an increasing trend on increasing the concentration of PS. Swelling behavior, hydrophobicity and thermal stability of PS-guar gum indicate that PS-guar gum has great thickening capacity and thermal stability. Nevertheless, modification of guar gum via ATRA truly is convenient to industrial production since facilitating the manufacturing process. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Structural, Thermal, Physical, Mechanical, and Barrier Properties of Chitosan Films with the Addition of Xanthan Gum.

    PubMed

    de Morais Lima, Maria; Carneiro, Lucia Cesar; Bianchini, Daniela; Dias, Alvaro Renato Guerra; Zavareze, Elessandra da Rosa; Prentice, Carlos; Moreira, Angelita da Silveira

    2017-03-01

    Films based on chitosan and xanthan gum were prepared using casting technique aiming to investigate the potential of these polymers as packaging materials. Six formulations of films were studied varying the proportion of chitosan and xanthan gum: 100:0 (chitosan:xanthan gum, w/w, C100XG0 film); 90:10 (chitosan:xanthan gum, w/w, C90XG10 film); 80:20 (chitosan:xanthan gum, w/w, C80XG20 film); 70:30 (chitosan:xanthan gum, w/w, C70XG30 film); 60:40 (chitosan:xanthan gum, w/w, C60XG40 film); and 50:50 (chitosan:xanthan gum, w/w, C50XG50 film). The total quantity of solids (chitosan and xanthan gum) in the filmogenic solution was 1.5 g per 100 mL of aqueous solution for all treatments, according to the proportion of each polymer. The films were evaluated by their functional groups, structural, thermal, morphological, physical, mechanical, and barrier properties. All films have presented endothermic peaks in the range of 122 to 175 °C and broad exothermic peaks above 200 °C, which were assigned to the melting temperature and thermal decomposition, respectively. These results demonstrated that films with xanthan gum have the highest T m and Δ m H. The films containing higher content of xanthan gum show also the highest tensile strength and the lowest elongation. Xanthan gum addition did not affect the water vapor permeability, solubility, and moisture of films. This set of data suggests the formation of chitosan-xanthan complexes in the films. © 2017 Institute of Food Technologists®.

  5. Effect of guar gum on gastric emptying in growing pigs.

    PubMed

    Rainbird, A L; Low, A G

    1986-01-01

    1. Simple gastric cannulas were surgically fitted to four pigs, initially of 30 kg live weight, to examine the effects of guar gum on gastric emptying. 2. Four semi-purified high-fat diets based on starch, casein, soya-bean oil and tallow were given to each pig. They contained 0 (control), 20, 40 or 60 g powdered guar gum/kg diet. The meals as fed contained 257 g dry matter (DM)/kg. 3. The contents of the stomach were evacuated, with rinsing, before feeding or 0.5, 1, 2 or 4 h after feeding. 4. The mean pH of the digesta was unaffected by guar gum until 4 h after feeding when the value increased as the amount of guar gum in the diet rose. 5. The only significant effects of guar gum on the emptying of digesta and its components (compared with the control diet) were to reduce the rate of emptying of (a) digesta 1 h after feeding (60 g/kg diet) and 4 h after feeding (40 and 60 g/kg diets), (b) dry matter and glucose 1 h after feeding (60 g/kg diet), (c) nitrogen 1 h after feeding (60 g/kg diet) and 4 h after feeding (40 and 60 g/kg diets). 6. When expressed on a half-time (T50) basis, the emptying of digesta and N (but not of DM and glucose) were significantly slower for diets containing 40 and 60 g guar gum/kg than for the control diet. 7. The apparent viscosity of the gastric digesta ranged between 0.5 and 23.7% of the values for the diets as consumed. 8. It was concluded that the effects of guar gum on gastric emptying of high-solid meals were small, and that this was unlikely to be an important aspect of the mechanism by which guar gum reduces postprandial blood glucose concentrations.

  6. Construction and application of a Xanthomonas campestris CGMCC15155 strain that produces white xanthan gum.

    PubMed

    Dai, Xiaohui; Gao, Ge; Wu, Mengmeng; Wei, Weiying; Qu, Jianmei; Li, Guoqiang; Ma, Ting

    2018-04-15

    In the industrial production of xanthan gum using Xanthomonas campestris CGMCC15155, large amounts of ethanol are required to extract xanthan gum from the fermentation broth and remove xanthomonadin impurities. To reduce the amount of ethanol and the overall production cost of xanthan gum, a xanthomonadin-deficient strain of CGMCC15155 was constructed by inserting the Vitreoscilla globin (vgb) gene, under the control of the LacZ promoter, into the region of the pigA gene, which is involved in xanthomonadin synthesis. The insertion of vgb inactivated pigA, resulting in the production of white xanthan gum. The lack of xanthomonadins resulted in a decreased yield of xanthan gum. However, the expression product of vgb gene, VHb, could increase the metabolism of X. campestris, which allowed the production of xanthan gum to reach wild-type levels in the engineered strain. The yield, molecular weight, and rheological properties of the xanthan gum synthesized by the engineered and wild-type bacteria were essentially the same. When the same volume of ethanol was used, the whiteness values of the xanthan gum extracted from engineered and wild-type bacteria were 65.20 and 38.17, respectively. To extract xanthan gum with the same whiteness, three and seven times the fermentation volume of ethanol was required for the engineered and wild-type strains, respectively. Thus, the engineered train reduced the requirement for ethanol in xanthan gum production by 133.3%. The results demonstrated that the engineered bacteria used less ethanol, thus reducing the downstream processing cost in xanthan gum production. © 2018 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

  7. Influence of gas injection on viscous and viscoelastic properties of Xanthan gum.

    PubMed

    Bobade, Veena; Cheetham, Madalyn; Hashim, Jamal; Eshtiaghi, Nicky

    2018-05-01

    Xanthan gum is widely used as a model fluid for sludge to mimic the rheological behaviour under various conditions including impact of gas injection in sludge. However, there is no study to show the influence of gas injection on rheological properties of xanthan gum specifically at the concentrations at which it is used as a model fluid for sludge with solids concentration above 2%. In this paper, the rheological properties of aqueous xanthan gum solutions at different concentrations were measured over a range of gas injection flow rates. The effect of gas injection on both the flow and viscoelastic behaviour of Xanthan gum (using two different methods - a creep test and a time sweep test) was evaluated. The viscosity curve of different solid concentrations of digested sludge and waste activated sludge were compared with different solid concentrations of Xanthan gum and the results showed that Xanthan gum can mimic the flow behaviour of sludge in flow regime. The results in linear viscoelastic regime showed that increasing gas flow rate increases storage modulus (G'), indicating an increase in the intermolecular associations within the material structure leading to an increase in material strength and solid behaviour. Similarly, in creep test an increase in the gas flow rate decreased strain%, signifying that the material has become more resistant to flow. Both observed behaviour is opposite to what occurs in sludge under similar conditions. The results of both the creep test and the time sweep test indicated that choosing Xanthan gum aqueous solution as a transparent model fluid for sludge in viscoelastic regime under similar conditions involving gas injection in a concentration range studied is not feasible. However Xanthan gum can be used as a model material for sludge in flow regime; because it shows a similar behaviour to sludge. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. Thickening compositions containing xanthomonas gum and hydroxyalkyl ether of guar gum

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jordan, W.A.

    1973-07-24

    Natural and synthetic gums have been used as thickeners for foods, coatings, paints, dyes, explosive slurries, oil-well fluids, and many other applications. Thickening compositions are described which consist of xanthomonas gum and hydroxyalkyl ether of guar gum and are suitable for use in explosive slurries. Aqueous sols of xanthomonas gum are plastic in nature and exhibit higher gel strengths than sols of other gums. Aqueous sols of hydroxyalkyl ether of guar are almost Newtonian and exhibit little or no gel strength. Aqueous sols of the thickening compositions of the present invention are plastic in character. At certain concentrations of themore » thickening compositions in aqueous sols, the sols have higher gel strengths than can be obtained from xanthomonas gum alone. At certain concentrations, the aqueous sols containing the thickening compositions exhibit greater viscosity differentials than do sols containing xanthomonas gum alone. In addition, the aqueous sols exhibit a greater drop in viscosity as the thickening composition concentration is reduced than do aqueous sols of xanthomonas gum alone.(5 claims)« less

  9. Effects of guar gum ingestion on postprandial blood pressure in older adults.

    PubMed

    Jang, A L; Hwang, S K; Kim, D U

    2015-03-01

    The aim of this study was to investigate the effects of guar gum on postprandial blood pressure in older people. A randomized, double-blind, placebo-controlled, cross-over design. Community senior centers in B city, South Korea. Twenty-two older female adults aged 67 to 88 with postprandial hypotension. The participants were randomly assigned to guar gum (semi-fluid food with 9 gram) or placebo intervention during the first treatment phase. After a washout period of 1 week, the two interventions were switched to the other in the second treatment phase. Blood pressure was measured during both phases before having a meal and every 15 minutes during 120 minutes after a meal with automated sphygmomanometer. Change in systolic blood pressure (SBP) over time was significantly different between guar gum and placebo groups (F=4.07, p=0.001). Compared with placebo group, guar gum group had significantly low prevalence of postprandial hypotension (PPH) (guar gum group=18.2% vs. placebo group=72.7%; χ² =13.20, p<0.001). It also had significant difference in change of diastolic blood pressure (DBP) over time between guar gum and placebo groups (F=2.49, p=0.027). This findings show that guar gum could be effective on postprandial drops in blood pressure in older female adults.

  10. Production of xanthan gum from a chemically defined medium introduction

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Weisrock, W.P.; Klein, H.S.

    1983-02-22

    Heteropolysaccharides produced by the action of Xanthomonas bacteria on carbohydrate media have a potential application as film forming agents, as thickeners in oil field drilling fluids and fracturing liquids and as emulsifying, stabilizing, and sizing agents. Heteropolysaccharides, particularly, xanthan gum, have a significant potential as mobility control agents in micellar polymer flooding. Xanthan gum has excellent viscosifying properties at low concentration, is resistant to shear degradation and exhibits only minimal losses in viscosity as a function of temperature, pH, and ionic strength. For these reasons, xanthan gum is an attractive alternative to synthetic polyacrylamides for enhanced oil recovery operations. 15more » claims.« less

  11. Functionality of maize, wheat, teff and cassava starches with stearic acid and xanthan gum.

    PubMed

    Maphalla, Thabelang Gladys; Emmambux, Mohammad Naushad

    2016-01-20

    Consumer concerns to synthetic chemicals have led to strong preference for 'clean' label starches. Lipid and hydrocolloids are food friendly chemicals. This study determines the effects of stearic acid and xanthan gum alone and in combination on the functionality of maize, wheat, teff and cassava starches. An increase in viscosity was observed for all starches with stearic acid and xanthan gum compared to the controls with cassava having the least increase. A further increase in viscosity was observed for the cereal starches with combination of stearic acid and xanthan gum. Stearic acid reduced retrogradation, resulting in soft textured pastes. Combination of stearic acid and xanthan gum reduced the formation of type IIb amylose-lipid complexes, syneresis, and hysteresis in cereal starches compared to stearic acid alone. A combination of stearic acid and xanthan gum produce higher viscosity non-gelling starches and xanthan gum addition increases physical stability to freezing and better structural recovery after shear. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. X-ray diffraction, IR spectroscopy and thermal characterization of partially hydrolyzed guar gum.

    PubMed

    Mudgil, Deepak; Barak, Sheweta; Khatkar, B S

    2012-05-01

    Guar gum was hydrolyzed using cellulase from Aspergillus niger at 5.6 pH and 50°C temperature. Hydrolyzed guar gum sample was characterized using Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, X-ray diffraction, dilute solution viscometry and rotational viscometry. Viscometry analysis of native guar gum showed a molecular weight of 889742.06, whereas, after enzymatic hydrolysis, the resultant product had a molecular weight of 7936.5. IR spectral analysis suggests that after enzymatic hydrolysis of guar gum there was no major transformation of functional group. Thermal analysis revealed no major change in thermal behavior of hydrolyzed guar gum. It was shown that partial hydrolysis of guar gum could be achieved by inexpensive and food grade cellulase (Aspergillus niger) having commercial importance and utilization as a functional soluble dietary fiber for food industry. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Rapid screening of guar gum using portable Raman spectral identification methods.

    PubMed

    Srivastava, Hirsch K; Wolfgang, Steven; Rodriguez, Jason D

    2016-01-25

    Guar gum is a well-known inactive ingredient (excipient) used in a variety of oral pharmaceutical dosage forms as a thickener and stabilizer of suspensions and as a binder of powders. It is also widely used as a food ingredient in which case alternatives with similar properties, including chemically similar gums, are readily available. Recent supply shortages and price fluctuations have caused guar gum to come under increasing scrutiny for possible adulteration by substitution of cheaper alternatives. One way that the U.S. FDA is attempting to screen pharmaceutical ingredients at risk for adulteration or substitution is through field-deployable spectroscopic screening. Here we report a comprehensive approach to evaluate two field-deployable Raman methods--spectral correlation and principal component analysis--to differentiate guar gum from other gums. We report a comparison of the sensitivity of the spectroscopic screening methods with current compendial identification tests. The ability of the spectroscopic methods to perform unambiguous identification of guar gum compared to other gums makes them an enhanced surveillance alternative to the current compendial identification tests, which are largely subjective in nature. Our findings indicate that Raman spectral identification methods perform better than compendial identification methods and are able to distinguish guar gum from other gums with 100% accuracy for samples tested by spectral correlation and principal component analysis. Published by Elsevier B.V.

  14. Long-term effects of guar gum in subjects with non-insulin-dependent diabetes mellitus.

    PubMed

    Groop, P H; Aro, A; Stenman, S; Groop, L

    1993-10-01

    The effects of 15 g guar gum/d on glycemic control, lipids, and insulin secretion were studied in 15 (8 male, 7 female) diet-treated subjects with non-insulin-dependent diabetes mellitus for 48 wk. Mean age (+/- SD) was 60 +/- 2 y (range 45-70 y), body mass index (in kg/m2) 28.6 +/- 0.9 (range 21.6 +/- 39.2), and duration of diabetes 6 +/- 1 y (range 2-14 y). Guar gum was preceded and followed by 8-wk placebo periods. Guar gum improved long-term glycemic control, postprandial glucose tolerance and lipid concentrations. The C-peptide response to a test meal increased by time during guar gum treatment, whereas the insulin response remained unchanged. This indicates that insulin secretion is enhanced by guar gum as reflected by increased C-peptide. A decreased molar ratio of insulin to C-peptide suggests that guar gum may increase hepatic insulin extraction. In conclusion, guar gum has favorable long-term effects on glycemic control and lipid concentrations.

  15. Evaluation of the flow properties of xanthan gum solution

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Duda, J.L.; Klaus, E.E.; Leung, W.C.

    1981-02-01

    In this study, the solution properties of two forms of xanthan gum, a powder and a broth, which are commercially available were evaluated. As previous studies have shown, the solutions prepared from the broth do exhibit better injectivity properties. However, this investigation also shows that other properties of these solutions are not equivalent. In its natural state, xanthane gum exists as a multistranded helix. This ordered confirmation can be destroyed and in a denatured state, the xanthan gum exhibits a more random configuration and consequently higher viscosity. One of the major conclusions of this study is that the xanthan powdermore » is partially denatured when compared to the xanthan molecules which exist in the broth. This denaturing may occur during the drying process in which the xanthan solids are removed from the broth. Solutions prepared from the broth in the absence of the added salt show a transition in the viscosity-temperature relationship at approximately 40 to 50/sup 0/C. This is consistent with the behavior of native xanthan gum solutions. At approximately 50/sup 0/C, the molecules in solution go into a more random state and consequently, an abrupt rise in the viscosity is observed. However, solutions prepared from the polymer powder do not show any evidence of such a transition. The solutions prepared from the broth can be thermally denatured, and this denaturing results in viscosities which are equivalent to the viscosities realized with the powdered polymer. Before denaturing, the broth solution showed a lower viscosity. Further, intrinsic viscosity measurements indicate that the hydrodynamic volume of the polymer solutions prepared from the borth are smaller than the hydrodynamic volumes of solutions prepared from the powder.« less

  16. Optimization of enzymatic hydrolysis of guar gum using response surface methodology.

    PubMed

    Mudgil, Deepak; Barak, Sheweta; Khatkar, B S

    2014-08-01

    Guar gum is a polysaccharide obtained from guar seed endosperm portion. Enzymatically hydrolyzed guar gum is low in viscosity and has several health benefits as dietary fiber. In this study, response surface methodology was used to determine the optimum conditions for hydrolysis that give minimum viscosity of guar gum. Central composite was employed to investigate the effects of pH (3-7), temperature (20-60 °C), reaction time (1-5 h) and cellulase concentration (0.25-1.25 mg/g) on viscosity during enzymatic hydrolysis of guar (Cyamopsis tetragonolobus) gum. A second order polynomial model was developed for viscosity using regression analysis. Results revealed statistical significance of model as evidenced from high value of coefficient of determination (R(2) = 0.9472) and P < 0.05. Viscosity was primarily affected by cellulase concentration, pH and hydrolysis time. Maximum viscosity reduction was obtained when pH, temperature, hydrolysis time and cellulase concentration were 6, 50 °C, 4 h and 1.00 mg/g, respectively. The study is important in optimizing the enzymatic process for hydrolysis of guar gum as potential source of soluble dietary fiber for human health benefits.

  17. Rheological Behavior of Xanthan Gum Solution Related to Shear Thinning Fluid Delivery for Subsurface Remediation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhong, Lirong; Oostrom, Martinus; Truex, Michael J.

    Xanthan gum, a biopolymer, forms shear thinning fluids which can be used as delivery media to improve the distribution of remedial amendments injected into heterogeneous subsurface environments. The rheological behavior of the shear thinning solution needs to be known to develop an appropriate design for field injection. In this study, the rheological properties of xanthan gum solutions were obtained under various chemical and environmental conditions relevant to delivery of remedial amendments to groundwater. Higher xanthan concentration raised the absolute solution viscosity and increased the degree of shear thinning. Addition of remedial amendments (e.g., phosphate, sodium lactate, ethyl lactate) caused themore » dynamic viscosity of xanthan gum to decrease, but the solutions maintained shear-thinning properties. Use of simple salt (e.g. Na+, Ca2+) to increase the solution ionic strength also decreased the dynamic viscosity of xanthan and the degree of shear thinning, although the effect is a function of xanthan gum concentration and diminished as the xanthan gum concentration was increased. At high xanthan concentration, addition of salt to the solution increased dynamic viscosity. In the absence of sediments, xanthan gum solutions maintain their viscosity properties for months. However, xanthan gum solutions were shown to lose dynamic viscosity over a period of days to weeks when contacted with saturated site sediment. Loss of viscosity is attributed to physical and biodegradation processes.« less

  18. Enhance the anti-microorganism activity of cinnamon oil by xanthan gum as emulsifying agent

    NASA Astrophysics Data System (ADS)

    Lieu, Dong M.; Dang, Thuy T. K.; Nguyen, Huong T.

    2018-04-01

    The aim of this study was to evaluate the effect of emulsifying agents (tween 20, DMSO (Dimethyl Sulfoxide) and xanthan gum) to inhibit Escherichia coli; Staphylococcus aureus; Saccharomyces cerevisiae and Aspergillus niger by cinnamon oil (Cinnamomum Cassia). Cinnamon oil was added in the emulsifying agents independently: tween 20 (0.3% v/v). DMSO (0.3% v/v) and xanthan gum (0.3% w/v) at different concentrations and evaluated their anti-microorganism activity by agar disk diffusion, mycelial growth inhibition and growth inhibition in liquid phase. The result indicated that, cinnamon oil diluted in different emulsifying agents showed the difference of the anti-microorganism activity, in which DMSO showed the lowest result. Xanthan gum and tween 20 show good stable emulsion. The anti-microorganism effect of cinnamon oil in tween 20 and xanthan gum was not significant difference. However, cinnamon oil in xanthan gum showed anti-microorganism activity better than tween 20 at low concentration in agar disk diffusion. This suggests that, cinnamon oil could be encapsulated by xanthan gum to enhance the anti-microorganism activity.

  19. Xanthan gum: an economical substitute for agar in plant tissue culture media.

    PubMed

    Jain, R; Babbar, S B

    2006-03-01

    Xanthan gum, a microbial desiccation-resistant polysaccharide prepared commercially by aerobic submerged fermentation from Xanthomonas campestris, has been successfully used as a solidifying agent for plant tissue culture media. Its suitability as a substitute to agar was demonstrated for in vitro seed germination, caulogenesis and rhizogenesis of Albizzia lebbeck, androgenesis in anther cultures of Datura innoxia, and somatic embryogenesis in callus cultures of Calliandra tweedii. Culture media used for eliciting these morphogenic responses were gelled with either 1% xanthan gum or 0.9% agar. Xanthan gum, like agar, supported all these responses.

  20. Glucose absorption, hormonal release and hepatic metabolism after guar gum ingestion

    NASA Technical Reports Server (NTRS)

    Simoes Nunes, C.; Malmlof, K.

    1992-01-01

    Six non-anaesthetized Large White pigs (mean body weight 59 +/- 1.7 kg) were fitted with permanent catheters in the portal vein, the brachiocephalic artery and the right hepatic vein and with electromagnetic flow probes around the portal vein and the hepatic artery. The animals were provided a basal none-fibre diet (diet A) alone or together with 6% guar gum (diet B) or 15% purified cellulose (diet C). The diets were given for 1 week and according to a replicated 3 x 3 latin-square design. On the last day of each adaptation period test meals of 800 g were given prior to blood sampling. The sampling was continued for 8 h. Guar gum strongly reduced the glucose absorption as well as the insulin, gastric inhibitory polypeptide (GIP) and insulin-like growth factor-1 (IGF-1) production. However, the reduction in peripheral blood insulin levels caused by guar gum was not associated with a change in hepatic insulin extraction. IGF-1 appeared to be strongly produced by the gut. The liver had a net uptake of the peptide. Ingestion of guar gum increased the hepatic extraction coefficient of gut produced IGF-1. Guar gum ingestion also appeared to decrease pancreatic glucagon secretion. Cellulose at the level consumed had very little effect on the parameters considered. It is suggested that the modulation of intestinal mechanisms by guar gum was sufficient to mediate the latter internal metabolic effects.

  1. The influence of guar gum on intestinal cholesterol transport in the rat.

    PubMed

    Gee, J M; Blackburn, N A; Johnson, I T

    1983-09-01

    Everted sacs of rat proximal small intestine were used to determine the effect of guar gum (5 g/l) on the uptake of cholesterol (0.1 mM) from a solution of micelles. The uptake of cholesterol was found to be linear both in the presence and absence of guar gum. When guar was present throughout the whole of the incubation medium, the uptake of cholesterol was reduced to approximately 40% of control values. Sacs which had been pre-incubated in guar gum before exposure to cholesterol in a guar-free medium also showed a reduction in cholesterol uptake but this was less pronounced. A two-stage perfusion technique, previously described (Blackburn & Johnson, 1981), was used to determine the effect of a guar layer adsorbed to the mucosal surface on cholesterol absorption in vivo. Such a layer leads to a reduction of approximately 36%; it was concluded that guar slows the absorption of cholesterol from micelles by a mechanism, or mechanisms, involving an increased resistance to diffusion in the aqueous medium. Groups of rats were meal-fed for at least 30 d on semi-synthetic diets with or without the inclusion of guar gum (20 g/kg). Rates of intestinal absorption of cholesterol, glucose and fluid were then determined by the perfusion technique in vivo. There was no reduction in absorption in the test animals compared with the controls. It is proposed that guar gum is able to slow the intestinal transport of cholesterol from a suspension of pre-formed micelles, but only when both are present in the lumen together. No evidence was obtained to suggest that the consumption by rats of a diet containing guar gum, at a level similar to that used in human studies, leads to any adaptive reduction in their rates of cholesterol or glucose absorption.

  2. Structure of xanthan gum and cell ultrastructure at different times of alkali stress

    PubMed Central

    de Mello Luvielmo, Márcia; Borges, Caroline Dellinghausen; de Oliveira Toyama, Daniela; Vendruscolo, Claire Tondo; Scamparini, Adilma Regina Pippa

    2016-01-01

    The effect of alkali stress on the yield, viscosity, gum structure, and cell ultrastructure of xanthan gum was evaluated at the end of fermentation process of xanthan production by Xanthomonas campestris pv. manihotis 280-95. Although greater xanthan production was observed after a 24 h-alkali stress process, a lower viscosity was observed when compared to the alkali stress-free gum, regardless of the alkali stress time. However, this outcome is not conclusive as further studies on gum purification are required to remove excess sodium, verify the efficiency loss and the consequent increase in the polymer viscosity. Alkali stress altered the structure of xanthan gum from a polygon-like shape to a star-like form. At the end of the fermentation, early structural changes in the bacterium were observed. After alkali stress, marked structural differences were observed in the cells. A more vacuolated cytoplasm and discontinuities in the membrane cells evidenced the cell lysis. Xanthan was observed in the form of concentric circles instead of agglomerates as observed prior to the alkali stress. PMID:26887232

  3. Biosynthesis of xanthan gum by Xanthomonas campestris LRELP-1 using kitchen waste as the sole substrate.

    PubMed

    Li, Panyu; Li, Ting; Zeng, Yu; Li, Xiang; Jiang, Xiaolong; Wang, Yabo; Xie, Tonghui; Zhang, Yongkui

    2016-10-20

    Herein, we report the production of xanthan gum by fermentation using kitchen waste as the sole substrate. The kitchen waste was firstly pretreated by a simple hydrolysis method, after which the obtained kitchen waste hydrolysate was diluted with an optimal ratio 1:2. In a 5-L fermentor, the maximum xanthan production, reducing sugar conversion and utilization rates reached 11.73g/L, 67.07% and 94.82%, respectively. The kinetics of batch fermentation was also investigated. FT-IR and XRD characterizations confirmed the fermentation product as xanthan gum. TGA analyses showed that the thermal stability of the xanthan gum obtained in this study was similar to commercial sample. The molecular weights of xanthan gum were measured to be 0.69-1.37×10(6)g/mol. The maximum pyruvate and acetyl contents in xanthan gum were 6.11% and 2.49%, respectively. This study provides a cost-effective solution for the reusing of kitchen waste and a possible low-cost approach for xanthan production. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Effect of Guar Gum with Sorbitol Coating on the Properties and Oil Absorption of French Fries.

    PubMed

    Jia, Bo; Fan, Daming; Li, Jinwei; Duan, Zhenhua; Fan, Liuping

    2017-12-13

    This paper investigated the effects of guar gum with sorbitol coating on the oil absorption of French fries by combined dye oil methods, confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The results showed that pretreatment of blanching with calcium ions and coating with guar gum and sorbitol could significantly reduce the structural oil (STO) and penetrated surface oil (PSO) of French fries and have no negative effects on its texture and also effectively control the final moisture content ( p < 0.05). Compared with control or samples coated with guar gum (blanching with or without calcium ions), the total oil (TO) of French fries with guar gum and sorbitol reduced by 50.8%, 33.1% and 30.6%, respectively. CLSM photographs confirmed that STO significantly reduced after coating with guar gum and sorbitol, followed by PSO. In the process of frying, the coatings of guar gum or guar gum with sorbitol could effectively prevent oil from infiltrating the potato tissue, which can be seen in the SEM photographs. The barrier properties of French fries were enhanced by coating guar gum, and sorbitol was added to avoid pores and cracks. Blanching with calcium ion can significantly reduce the final moisture content of coating French fries.

  5. Effect of Guar Gum with Sorbitol Coating on the Properties and Oil Absorption of French Fries

    PubMed Central

    Jia, Bo; Fan, Daming; Li, Jinwei; Duan, Zhenhua; Fan, Liuping

    2017-01-01

    This paper investigated the effects of guar gum with sorbitol coating on the oil absorption of French fries by combined dye oil methods, confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The results showed that pretreatment of blanching with calcium ions and coating with guar gum and sorbitol could significantly reduce the structural oil (STO) and penetrated surface oil (PSO) of French fries and have no negative effects on its texture and also effectively control the final moisture content (p < 0.05). Compared with control or samples coated with guar gum (blanching with or without calcium ions), the total oil (TO) of French fries with guar gum and sorbitol reduced by 50.8%, 33.1% and 30.6%, respectively. CLSM photographs confirmed that STO significantly reduced after coating with guar gum and sorbitol, followed by PSO. In the process of frying, the coatings of guar gum or guar gum with sorbitol could effectively prevent oil from infiltrating the potato tissue, which can be seen in the SEM photographs. The barrier properties of French fries were enhanced by coating guar gum, and sorbitol was added to avoid pores and cracks. Blanching with calcium ion can significantly reduce the final moisture content of coating French fries. PMID:29236044

  6. Steady and dynamic shear rheological properties of gum-based food thickeners used for diet modification of patients with dysphagia: effect of concentration.

    PubMed

    Seo, Chan-Won; Yoo, Byoungseung

    2013-06-01

    Gum-based food thickeners are widely used for diet modification for patients with dysphagia in Korea. In this study, the rheological properties of two commercially available gum-based food thickeners (xanthan gum and xanthan-guar gum mixture) marketed in Korea were determined as a function of concentration. The steady and dynamic shear rheological properties of the food thickeners in water were investigated at five different concentrations (1.0 %, 1.5 %, 2.0 %, 2.5 %, and 3.0 % w/w). Both food thickeners showed high shear-thinning fluid characteristics (n = 0.14-0.19) at all concentrations (1.0-3.0 %). In general, the thickener with the xanthan-guar gum mixture showed higher values for steady shear viscosity compared to that with xanthan alone, whereas it showed lower dynamic rheological parameter values. Steady and dynamic rheological parameters demonstrated differences in rheological behaviors between the gum-based food thickeners, indicating that their rheological properties are related to the type of gum and gum concentration. In particular, the type of gum played a role in the time-dependent flow properties of the gum-based food thickeners. Appropriately selecting a commercial food thickener appears to be of great importance for dysphagia therapists and patients.

  7. Guar gum effects on food intake, blood serum lipids and glucose levels of Wistar rats.

    PubMed

    Frias, A C; Sgarbieri, V C

    1998-01-01

    The effects of guar gum derived from the endosperm of Cyamopsis tetragonoloba (75% soluble fiber, 7.6% insoluble fiber, 2.16% crude protein, 0.78% total lipids, 0.54% ash and 9.55% moisture) on food intake, levels of blood serum cholesterol, triacylglycerols, glucose and LDL and HDL-cholesterol were studied. The effects of guar gum on indices of protein absorption and utilization were also investigated. Diets containing 0%, 10% and 20% (w/w) guar gum or 10% and 20% cellulose powder (reference) were fed to normal rats for 60 days. The rats fed the guar gum diets showed significantly (p < or = 0.05) lower levels of blood serum cholesterol, triacylglycerols, reduced food intake and body weight gain. Furthermore, a concomitant increase in HDL-cholesterol with a substantial elevation of the HDL/LDL cholesterol ratio were noted. Guar gum decreased blood serum glucose only during the first month of the experiment, and no changes in the indices of protein absorption and utilization were found. The guar gum caused a 10% increase in the small intestine length and a 25% retardation in the intestinal transit. The results of this research suggested that guar gum could potentially be effective in the treatment of hypercholesterolemia and obesity in humans.

  8. Guar gum coupled microscale ZVI for in situ treatment of CAHs: continuous-flow column study.

    PubMed

    Velimirovic, Milica; Simons, Queenie; Bastiaens, Leen

    2014-01-30

    A column study was performed under in situ conditions to evaluate to which extend the inactivation of the microscale zerovalent iron (mZVI) by guar gum occurs under continuous flow conditions. Five aquifer containing columns were set up under different conditions. Efficient removal of trichloroethene was observed for the column amended by mZVI. Stabilization of the mZVI with guar gum led to slightly reduced activity. More reduced reactivity was observed in the poisoned column containing guar gum stabilized mZVI. This confirms that soil microorganisms can degrade guar gum and that subsequent removal of the oligosaccharides by the groundwater flow (flushing effect) can reactivate the mZVI. After more than six months of continuous operation the columns were dismantled. DNA-based qPCR analysis revealed that mZVI does not significantly affect the bacterial community, while guar gum stabilized mZVI particles can even induce bacterial growth. Overall, this study suggests that the temporarily decreased mZVI reactivity due to guar gum, has a rather limited impact on the performance of in situ reactive zones. The presence of guar gum slightly reduced the reactivity of iron, but also slowed down the iron corrosion rate which prolongs the life time of reactive zone. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. Effect of xanthan gum on lipid digestion and bioaccessibility of β-carotene-loaded rice starch-based filled hydrogels.

    PubMed

    Park, Shinjae; Mun, Saehun; Kim, Yong-Ro

    2018-03-01

    The aim of this study was to examine the effects of xanthan gum on the lipid digestibility, rheological properties, and β-carotene bioaccessibility of rice starch-based filled hydrogels. β-Carotene was solubilized within lipid droplets of emulsion that were then entrapped within rice starch hydrogels fabricated with different concentrations of xanthan gum. At a low concentration of xanthan gum (<0.5wt%), the viscous characteristics of the filled starch hydrogels increased. Furthermore, these hydrogels had a slower rate of lipid digestion than the β-carotene-loaded emulsion. As the concentration of xanthan gum was increased (to 1.0wt% and 2.0wt%), the filled starch hydrogels became more elastic gel-like than those without xanthan gum, and also had the fastest rate and highest final extent of lipid digestion. The addition of xanthan gum to the filled starch hydrogel lowered the bioaccessibility of β-carotene to varying degrees, depending on the xanthan gum concentration. The results obtained from this study can be useful in designing gel-like food products fortified with lipophilic nutraceuticals. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. In vitro studies on guar gum based formulation for the colon targeted delivery of Sennosides.

    PubMed

    Momin, Munira; Pundarikakshudu, K

    2004-09-24

    The objective of the present study is to develop colon targeted drug delivery systems for sennosides using guar gum as a carrier. Matrix tablets containing various proportions of guar gum were prepared by wet granulation technique using starch paste as a binder. The tablets were evaluated for content uniformity and in vitro drug release study as per BP method. T(50) % value from the dissolution studies was taken for selecting the best formulation. Guar gum matrix tablets released 4-18% sennosides in the physiological environment of gastrointestinal tract depending on the proportion of the guar gum used in the formulation. The matrix tablets containing 50% of guar gum were found to be suitable for targeting of sennosides for local action in the colon. Compared to tablets having 30% and 40% of guar gum, those with 50% guar gum gave better T(50)% (11.7 h) le and fewer amounts (5-8%) of drug release in upper GIT. These tablets with 50% guar gum released 43% and 96% sennosides with and without rat caecal fluids. This suggests the susceptibility of matrix to the colonic micro flora. The similarity factor (f2 value) for drug release with and without rat caecal fluids was found to be less than 30. When hydroxy propyl methylcellulose phthalate (10%) was used as a coat material on the matrix tablets, the initial loss of 5-8% sennosides in stomach could be completely averted. These tablets showed no change in physical appearance, content and dissolution profile upon storage at 45 degrees C / 75% relative humidity for 3 months. The results of our study indicates that matrix tablets containing 50% guar gum and coated with 10% hydroxy propyl methylcellulose phthalate are most suitable for drugs like sennosides which are mainly active in the lower GIT.

  11. Preparation and in vitro evaluation of guar gum based triple-layer matrix tablet of diclofenac sodium

    PubMed Central

    Chavda, H.V.; Patel, M.S.; Patel, C.N.

    2012-01-01

    The objective of the present study was to design an oral controlled drug delivery system for sparingly soluble diclofenac sodium (DCL) using guar gum as triple-layer matrix tablets. Matrix tablet granules containing 30% (D1), 40% (D2) or 50% (D3) of guar gum were prepared by the conventional wet granulation technique. Matrix tablets of diclofenac sodium were prepared by compressing three layers one by one. Centre layer of sandwich like structure was incorporated with matrix granules containing DCL which was covered on either side by guar gum granule layers containing either 70, 80 or 87% of guar gum as release retardant layers. The tablets were evaluated for hardness, thickness, drug content, and drug release studies. To ascertain the kinetics of drug release, the dissolution profiles were fitted to various mathematical models. The in vitro drug release from proposed system was best explained by the Hopfenberg model indicating that the release of drug from tablets displayed heterogeneous erosion. D3G3, containing 87% of guar gum in guar gum layers and 50% of guar gum in DCL matrix granule layer was found to provide the release rate for prolonged period of time. The results clearly indicate that guar gum could be a potential hydrophilic carrier in the development of oral controlled drug delivery systems. PMID:23181081

  12. Influence of xanthan gum on the structural characteristics of myofibrillar proteins treated by high pressure.

    PubMed

    Villamonte, Gina; Jury, Vanessa; Jung, Stéphanie; de Lamballerie, Marie

    2015-03-01

    The effects of xanthan gum on the structural modifications of myofibrillar proteins (0.3 M NaCl, pH 6) induced by high pressure (200, 400, and 600 MPa, 6 min) were investigated. The changes in the secondary and tertiary structures of myofibrillar proteins were analyzed by circular dichroism. The protein denaturation was also evaluated by differential scanning calorimetry. Likewise, the protein surface hydrophobicity and the solubility of myofibrillar proteins were measured. High pressure (600 MPa) induced the loss of α-helix structures and an increase of β-sheet structures. However, the presence of xanthan gum hindered the former mechanism of protein denaturation by high pressure. In fact, changes in the secondary (600 MPa) and the tertiary structure fingerprint of high-pressure-treated myofibrillar proteins (400 to 600 MPa) were observed in the presence of xanthan gum. These modifications were confirmed by the thermal analysis, the thermal transitions of high-pressure (400 to 600 MPa)-treated myofibrillar proteins were modified in systems containing xanthan gum. As consequence, the high-pressure-treated myofibrillar proteins with xanthan gum showed increased solubility from 400 MPa, in contrast to high-pressure treatment (600 MPa) without xanthan gum. Moreover, the surface hydrophobicity of high-pressure-treated myofibrillar proteins was enhanced in the presence of xanthan gum. These effects could be due to the unfolding of myofibrillar proteins at high-pressure levels, which exposed sites that most likely interacted with the anionic polysaccharide. This study suggests that the role of food additives could be considered for the development of meat products produced by high-pressure processing. © 2015 Institute of Food Technologists®

  13. Thermal stability and haemolytic effects of depolymerized guar gum derivatives.

    PubMed

    Hussain, Majid; Zahoor, Tahir; Akhtar, Saeed; Ismail, Amir; Hameed, Aneela

    2018-03-01

    The purpose of current study was to purify and partially depolymerize guar gum by β-mannanase, HCl, Ba(OH) 2 actions and subjected to inspect compositional, thermogravimetric analysis (TGA) and haemolytic activity. Chemical composition revealed mannose and galactose ratio remained un-altered even after process of purification and hydrolysis. TGA thermograms affirmed initial and final decomposition temperature in various zones. Major decomposition stages apparently revealed partially hydrolyzed guar gum (PHGG) exhibited better heat stable properties having more zones of degradation than crude one. Furthermore, all guar fractions (2.5-250 mg/mL) were subjected to haemolysis to evaluate toxic effects during process of hydrolysis. The crude and hydrolyzed guar galactomannans exhibited minor haemolytic activity (1.9 ± 0.03-7.24 ± 0.02%) when compared to 0.1% Triton-X 100 (100% haemolysis) showing no toxic effects to human RBC's. Conclusively, hydrolyzed guar-galactomannans are safe and can be used in food products with improved heat stability.

  14. TECHNICAL NOTE: The effect of the green additive guar gum on the properties of magnetorheological fluid

    NASA Astrophysics Data System (ADS)

    Fang, Chen; Zhao, Bin Yuan; Chen, LeSheng; Wu, Qing; Liu, Nan; Hu, Ke Ao

    2005-02-01

    Magnetorheological (MR) fluid containing guar gum was prepared for the first time by ball-milling the guar gum powder together with silicone oil and carbonyl iron powder. By forming a coating layer over the ground carbonyl iron powder, the guar gum improves the sedimentation stability and thixotropy of the MR fluid effectively.

  15. Xanthan Gum-a lyotropic, liquid crystalline polymer and its properties as a suspending agent

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Salamone, J.C.; Clough, S.B.; Jamison, D.E.

    1982-08-01

    Studies a variety of xanthan solutions of various polymer concentrations in the presence and absence of various salts under a polarized light microscope (100X) in order to test xanthan gum for liquid crystalline order. Xanthan gum, a polysaccharide used in drilling fluids and in tertiary recovery, has relatively stable viscosity properties as a function of salt concentration, pH, temperature, and shear degradation. With solutions from 2 to 10% (wt/vol) xanthan gum in distilled water at room temperature, birefringent, ordered domains were observed at 10% concentration, with a decrease in birefringence as the polymer concentration decreased. When the xanthan solution ismore » sheared between a glass slide and a cover slip, the optic axis (chain direction) aligns using the shear direction (as determined by the colors displayed using a first-order red plate). Examines liquid crystalline behavior of other naturally occurring polymers.« less

  16. Rheological Differences of Waxy Barley Flour Dispersions Mixed with Various Gums

    PubMed Central

    Kim, Chong-Yeon; Yoo, Byoungseung

    2017-01-01

    Rheological properties of waxy barley flour (WBF) dispersions mixed with various gums (carboxyl methyl celluleose, guar gum, gum arabic, konjac gum, locust bean gum, tara gum, and xanthan gum) at different gum concentrations were examined in steady and dynamic shear. WBF-gum mixture samples showed a clear trend of shear-thinning behavior and had a non-Newtonian nature with yield stress. Rheological tests indicated that the flow and dynamic rheological parameter (apparent viscosity, consistency index, yield stress, storage modulus, and loss modulus) values of WBF dispersions mixed with gums, except for gum arabic, were significantly higher than those of WBF with no gum, and also increased with an increase in gum concentration. In particular, konjac gum at 0.6% among other gums showed the highest rheological parameter values. Tan δ values of WBF-xanthan gum mixtures were lower than those of other gums, showing that there is a more pronounced synergistic effect on the elastic properties of WBF in the presence of xanthan gum. Such synergistic effect was hypothesized by considering thermodynamic compatibility between xanthan gum and WBF. These rheological results suggest that in the WBF-gum mixture systems, the addition of gums modified the flow and viscoelastic properties of WBF, and that these modifications were dependent on the type of gum and gum concentration. PMID:28401089

  17. Self-healing guar gum and guar gum-multiwalled carbon nanotubes nanocomposite gels prepared in an ionic liquid.

    PubMed

    Sharma, Mukesh; Mondal, Dibyendu; Mukesh, Chandrakant; Prasad, Kamalesh

    2013-10-15

    Guar gum is a galactomannan extracted from the seed of the leguminous shrub Cyamopsis tetragonoloba. It was found to form a soft viscoelastic gel in 1-butyl-3-methylimidazolium chloride, an ionic liquid at an optimized concentration of 10%w/v. A nanocomposite gel of the gum with enhanced strength could be prepared with 0.2%w/v of multiwalled carbon nanotubes (MWCNTs) in the ionic liquid. When the gels thus prepared were subjected to surface fractures or bisected completely, they found to self-heal at room temperature without any external interventions. The self-healing process could be repeated several times. These viscoelastic gel systems showed thixotropic nature and recovery of the storage modulus with time for several cycles was observed upon rheological investigations. The interaction took place between ionic liquid, guar gum and MWCNT was studied by SEM, TEM, FT-IR, powder XRD and rheometry. The results suggested that, upon standing at room temperature development of electrostatic interactions and the van der Waals interactions among the ionic liquid molecules facilitated the formation of reversible noncovalent bonds and eventually activated the self-healing in the gel systems through appropriate chain entanglements. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Effect of partially depolymerized guar gum on acute metabolic variables in patients with non-insulin-dependent diabetes.

    PubMed

    Gatenby, S J; Ellis, P R; Morgan, L M; Judd, P A

    1996-04-01

    Fourteen patients with non-insulin-dependent diabetes (NIDDM) attended the study centre on 4 mornings separated by at least 3 days, to receive in random order 75 g carbohydrate breakfast meals of control or guar breads with jam and butter. Guar gum flours of low, medium, and high molecular weight (MW) were incorporated into wheat bread rolls to provide 7.6 g guar per meal. Venous blood samples were taken via an indwelling cannula in a forearm vein at fasting and at eight postprandial times and then analysed for blood glucose, plasma insulin, C-peptide, and gastric inhibitory polypeptide (GIP). Guar gum bread significantly reduced the postprandial rise in blood glucose, plasma insulin, and, except for bread containing low MW guar gum, plasma GIP levels compared to the control. Thus, the partial depolymerization of guar gum does not diminish its physiological activity. No reductions in postprandial plasma C-peptide levels were seen after any of the guar bread meals. This suggests that guar gum attenuates the insulin concentration in peripheral venous blood in patients with NIDDM by increasing the hepatic extraction of insulin.

  19. Effect of guar gum on gastric emptying of test meals of varying energy content in growing pigs.

    PubMed

    Rainbird, A L

    1986-01-01

    1. Existing information on whether the action of guar gum in decreasing postprandial blood glucose concentrations is due, at least in part, to a reduced rate of gastric emptying is conflicting, possibly because three types of test meals have been used. In order to test whether the type of test meal used influences the action of guar gum, these three types of meal were compared, either without or with guar gum, in growing pigs. The meals were: a high-energy meal (HEM), a low-energy milky drink (LEMD) and a glucose drink (GD). 2. Six pigs were prepared with a simple gastric cannula which allowed complete removal of the stomach contents just before or 0.5, 1, 2 or 4 h after feeding. 3. The three types of test meal without guar gum gave rise to very different postprandial profiles of gastric pH and of digesta and dry matter (DM) emptying from the stomach. 4. Addition of guar gum to the GD significantly raised gastric pH at 0.5 and 1 h after feeding but, when it was added to HEM, gastric pH was only significantly raised 4 h after feeding. No significant effect on gastric pH was seen when guar gum was added to LEMD. 5. Although addition of guar gum to GD had no significant effect on the emptying of digesta from the stomach, when added to HEM the rate of emptying of digesta was significantly reduced 1, 2 and 4 h after feeding. Addition of guar gum to LEMD only significantly increased the amount of digesta remaining in the stomach 2 h after feeding. 6. There was no significant effect on the emptying of DM from the stomach when guar gum was added to either HEM or LEMD. However, addition of guar gum to GD significantly reduced the mean rate of emptying of DM 0.5 h after feeding. 7. Addition of guar gum to either LEMD or GD had no significant effect on the DM concentration of the evacuated gastric digesta. However, addition of guar gum to HEM significantly lowered the DM concentration of the evacuated gastric digesta 1, 2 and 4 h after feeding. 8. It was concluded that

  20. Xanthan gum recovery from fermentation broth using ultrafiltration: Kinetics and process evaluation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lo, Y.M.; Yang, S.T.; Min, D.B.

    1995-12-01

    Ultrafiltration of xanthan gum solution as an alternative method to alcohol precipitation for xanthan gum recovery from dilute fermentation broth was studied. A polysulfone membrane (with 500,000 MWCO) hollow fiber (106 mil fiber diameter) tubular cartridge was used to concentrate xanthan broth from less than 3 (w/v) % to {approximately}13.5 (w/v) %, with the xanthan recovery yield of {approximately}95 % or higher. During ultrafiltration, the filtrate flux was one order of magnitude lower for xanthan broth than for water, However, the flux remained almost constant for xanthan concentrations up to {approximately}8%. It was then reduced dramatically as the xanthan concentrationmore » increased beyond 8%. The reduced filtrate flux was caused by the reduced pumping (shear) rate and higher viscosities at higher xanthan concentrations. At constant xanthan concentration, the filtrate flux remained almost unchanged for the entire period studied, suggesting that the process is not subject to membrane fouling. In general, the filtrate flux decreased with increasing the xanthan concentration and increased with increasing the pumping (shear) rate and the trans-membrane pressure difference. Changing the solution pH had a slight effect on the viscosity of xanthan solution, but did not affect the filtration performance. Even under high-shear-rate conditions, ultrafiltration did not give any adverse effects on the rheological properties and molecular weight of the xanthan polymer. Thus, ultra filtration can be used to concentrate xanthan broth from fermentation by a factor of four or higher and to reduce the subsequent alcohol recovery costs by at least 75 %.« less

  1. Guar gum and bile: effects on postprandial gallbladder contraction and on serum bile acids in man.

    PubMed

    Hansen, W E; Maurer, H; Vollmar, J; Bräuning, C

    1983-08-01

    In a randomized cross-over study, 10 healthy volunteers received a fiber-depleted liquid mixed meal alone and, exactly 7 days apart, a combination with 15 g guar gum. Addition of the dietary fiber inhibited emptying of the gall bladder after 30 min to 7 (5-10) ml instead of 4 (3-6) ml (p less than 0.05) and delayed its refilling. Also the postprandial increase in conjugated serum bile acids was prevented by guar gum. The maximal postprandial blood glucose 30 min after ingestion of the meal was reduced from 120 (117-135) mg/dl to 110 (105-119) mg/dl (p less than or equal to 0.05) by guar gum. Serum insulin levels were unaffected by guar gum.--Our data suggest that the addition of guar gum to meals affects enterohepatic circulation of bile acids as well as digestion of carbohydrates.

  2. 21 CFR 184.1339 - Guar gum.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Guar gum. 184.1339 Section 184.1339 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific...

  3. 21 CFR 184.1339 - Guar gum.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Guar gum. 184.1339 Section 184.1339 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) DIRECT FOOD SUBSTANCES AFFIRMED AS GENERALLY RECOGNIZED AS SAFE Listing of Specific...

  4. Oxidized guar gum-ZnO hybrid nanostructures: synthesis, characterization and antibacterial activity

    NASA Astrophysics Data System (ADS)

    Singh, Vandana; Dwivedi, Lalit Mohan; Baranwal, Kirti; Asthana, Sugandha; Sundaram, Shanthy

    2018-04-01

    In the present study, guar gum (GG) and oxidized guar gum (OGG) have been used for modulating the antibacterial activity of ZnO. Oxidized guar gum-zinc oxide (OGG-ZnO) or guar gum-zinc oxide (GG-ZnO) nanostructures were synthesized by adding aqueous ammonia to zinc acetate solution in the presence of OGG or GG, respectively. OGG could significantly enhance the antibacterial activity of ZnO for a range of Gram-negative and Gram-positive bacterial strains and this enhancement was most pronounced for Bacillus subtilis and Salmonella typhi. At the same time, GG-ZnO nanostructures were found to be less bioactive than the pure ZnO for the same strains. TEM analysis revealed that optimum OGG-ZnO nanostructure (Z4) is of 200 nm size, oblong in shape, and has slightly clustered texture, while XRD confirmed its crystalline structure with hexagonal phase. The extra surface oxygen species (thus oxygen deficiency) has been assigned for better antibacterial behavior of OGG-ZnO. The study may be extended for other polysaccharide/derivatives to obtain ZnO nanostructures with enhanced antibacterial properties.

  5. Antihyperglycemic and antihyperlipidemic effects of guar gum on streptozotocin-induced diabetes in male rats

    PubMed Central

    Saeed, Samarghandian; Mosa-Al-Reza, Hadjzadeh; Fatemeh, Amin Nya; Saeideh, Davoodi

    2012-01-01

    Background: Herbal medicine is widely used in the treatment of diseases like diabetes mellitus. We investigated the effects of guar gum in diabetic rats for the reduction of the risk of diabetes and cardiovascular disease. Dietary pattern emphasizing foods high in complex carbohydrates and fiber are associated with low blood glucose and cholesterol levels. Materials and Methods: Diet containing 0%, 5%, 10% and 20% (w/w) guar gum was fed to diabetic rats for 28 days. Blood serum glucose, triglycerides, cholesterol, low-density lipoprotein cholesterol (LDL-C), high-density lipoprotein cholesterol levels, atherogenic index levels, body weights and food intake were monitored at 0, 7.14 and 28 days after induction of diabetes. Results: In spite of the fact that diabetes elevated blood lipids in all rats after 14 days, the guar gum diet significantly decreased the serum concentration of cholesterol, triacylglicerols and LDL-C and atherogenic index. The most significant result in this study was the reduction of blood glucose in diabetic rats treated with the guar gum diet after 28 days versus non- and glibenclamide-treated rats. The gum promoted a general improvement in the condition of the diabetic rats in body weight and food intake in comparison with nontreated rats. Conclusion: The results of this research suggest that guar gum was significantly effective in comparison with glibenclamide in the treatment of hyperlipidemia and hyperglycemia in diabetes rats. Therefore, it may be suggested as a reliable fiber in diabetic regimes in diabetic patients. PMID:22438666

  6. Effects of guar gum and cellulose on glucose absorption, hormonal release and hepatic metabolism in the pig.

    PubMed

    Nunes, C S; Malmlöf, K

    1992-11-01

    Six Large White pigs (mean body-weight 59 (SE 1.7) kg) were surgically fitted with permanent catheters in the portal vein, the brachiocephalic artery and the right hepatic vein, as well as with electromagnetic flow probes around the portal vein and the hepatic artery, and allowed to recover. The non-anaesthetized animals were given a basal non-fibre diet (diet A) alone or together with 60 g guar gum/kg (diet B) or 150 g purified cellulose/kg (diet C) by substitution for mica. The diets were given for weekly periods and according to a replicated 3 x 3 Latin square design. On the last day of each such adaptation period, test meals of 800 g were given before blood sampling. Sampling was continued for 8 h. Guar gum strongly reduced glucose apparent absorption without changing the absorption and the hepatic uptake profiles. Production rates of insulin, gastric inhibitory polypeptide and insulin-like growth factor-1 (IGF-1) were lowest after guar gum ingestion. However, the reductions in peripheral blood insulin levels caused by guar gum were not associated with a change in hepatic insulin extraction. IGF-1 appeared to be strongly secreted by the gut, whereas the liver had a net uptake of the peptide. Ingestion of guar gum increased the hepatic extraction coefficient of gut-produced IGF-1. Guar gum ingestion appeared also to decrease glucagon secretion. Cellulose at the level consumed had very few effects on the variables considered. It is suggested that the modulation of intestinal mechanisms by guar gum was sufficient to mediate the metabolic effects described.

  7. Effects of guar gum and cellulose on glucose absorption, hormonal release and hepatic metabolism in the pig

    NASA Technical Reports Server (NTRS)

    Nunes, C. S.; Malmlof, K.

    1992-01-01

    Six Large White pigs (mean body-weight 59 (SE 1.7) kg) were surgically fitted with permanent catheters in the portal vein, the brachiocephalic artery and the right hepatic vein, as well as with electromagnetic flow probes around the portal vein and the hepatic artery, and allowed to recover. The non-anaesthetized animals were given a basal non-fibre diet (diet A) alone or together with 60 g guar gum/kg (diet B) or 150 g purified cellulose/kg (diet C) by substitution for mica. The diets were given for weekly periods and according to a replicated 3 x 3 Latin square design. On the last day of each such adaptation period, test meals of 800 g were given before blood sampling. Sampling was continued for 8 h. Guar gum strongly reduced glucose apparent absorption without changing the absorption and the hepatic uptake profiles. Production rates of insulin, gastric inhibitory polypeptide and insulin-like growth factor-1 (IGF-1) were lowest after guar gum ingestion. However, the reductions in peripheral blood insulin levels caused by guar gum were not associated with a change in hepatic insulin extraction. IGF-1 appeared to be strongly secreted by the gut, whereas the liver had a net uptake of the peptide. Ingestion of guar gum increased the hepatic extraction coefficient of gut-produced IGF-1. Guar gum ingestion appeared also to decrease glucagon secretion. Cellulose at the level consumed had very few effects on the variables considered. It is suggested that the modulation of intestinal mechanisms by guar gum was sufficient to mediate the metabolic effects described.

  8. Highly viscous guar gum shifts dietary amino acids from metabolic use to fermentation substrate in domestic cats.

    PubMed

    Rochus, Kristel; Janssens, Geert P J; Van de Velde, Hannelore; Verbrugghe, Adronie; Wuyts, Birgitte; Vanhaecke, Lynn; Hesta, Myriam

    2013-03-28

    The present study evaluated the potential of affecting amino acid metabolism through intestinal fermentation in domestic cats, using dietary guar gum as a model. Apparent protein digestibility, plasma fermentation metabolites, faecal fermentation end products and fermentation kinetics (exhaled breath hydrogen concentrations) were evaluated. Ten cats were randomly assigned to either guar gum- or cellulose-supplemented diets, that were fed in two periods of 5 weeks in a crossover design. No treatment effect was seen on fermentation kinetics. The apparent protein digestibility (P= 0.07) tended to be lower in guar gum-supplemented cats. As a consequence of impaired small-intestinal protein digestion and amino acid absorption, fermentation of these molecules in the large intestine was stimulated. Amino acid fermentation has been shown to produce high concentrations of acetic and butyric acids. Therefore, no treatment effect on faecal propionic acid or plasma propionylcarnitine was observed in the present study. The ratio of faecal butyric acid:total SCFA tended to be higher in guar gum-supplemented cats (P= 0.05). The majority of large-intestinal butyric acid is absorbed by colonocytes and metabolised to 3-hydroxy-butyrylcoenzyme A, which is then absorbed into the bloodstream. This metabolite was analysed in plasma as 3-hydroxy-butyrylcarnitine, which was higher (P= 0.02) in guar gum-supplemented cats. In all probability, the high viscosity of the guar gum supplement was responsible for the impaired protein digestion and amino acid absorption. Further research is warranted to investigate whether partially hydrolysed guar gum is useful to potentiate the desirable in vivo effects of this fibre supplement.

  9. Electrospinning of guar gum/corn starch blends

    USDA-ARS?s Scientific Manuscript database

    In this study, electrospun nanofibers were prepared for the first time from aqueous blends of guar gum (GG) and corn starch with amylose contents of 27.8% (CS28) and 50% (CS50). The fiber morphology and fiber diameter sizes (FDS) were correlated with solution rheology. The spinning solutions were pr...

  10. Effect of guar gum conjugation on functional, antioxidant and antimicrobial activity of egg white lysozyme.

    PubMed

    Hamdani, Afshan Mumtaz; Wani, Idrees Ahmed; Bhat, Naseer Ahmad; Siddiqi, Raushid Ahmad

    2018-02-01

    This study was undertaken to analyze the effect of conjugation of egg-white lysozyme with guar gum. Lysozyme is an antimicrobial polypeptide that can be used for food preservation. Its antibacterial activity is limited to gram positive bacteria. Conjugation with polysaccharides like guar gum may broaden its activity against gram negatives. Conjugate was developed through Maillard reaction. Assays carried out included sugar estimation, SDS-PAGE, GPC, color, FT-IR, DSC, thermal stability, solubility, emulsifying, foaming and antioxidant activity. In addition, antimicrobial activity of the conjugate was determined against two gram positive (Staphyllococcus aureus and Enterococcus) and two gram negative pathogens (E. coli and Salmonella). Results showed higher functional properties of lysozyme-guar gum conjugate. The antioxidant properties increased from 2.02-35.80% (Inhibition of DPPH) and 1.65-4.93AAE/g (reducing power) upon guar gum conjugation. Conjugate significantly inhibited gram negative bacteria and the antibacterial activity also increased significantly against gram positive pathogens. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Rapid Retort Processing of Eggs

    DTIC Science & Technology

    2006-12-04

    cyclodextrin, xanthan gum , ι-carrageenan, λ-carrageenan, κ-carrageenan, guar gum , locust bean gum , xanthan gum and starch. To improve the flavor of the...Cyclodextrin and κ-carrageenan were not effective in preventing synerisis. Guar gum and locust bean gum , and λ-carrageenan resulted in products with a slimy...Laboratory batches were prepared by hydrating the xanthan gum and pregelatinized starch in water which contained the salt and citric acid. The powdered

  12. Combination of PLGA nanoparticles with mucoadhesive guar-gum films for buccal delivery of antihypertensive peptide.

    PubMed

    Castro, Pedro M; Baptista, Patrícia; Madureira, Ana Raquel; Sarmento, Bruno; Pintado, Manuela E

    2018-05-22

    Oral administration of proteins and peptides still is a challenging task to overcome due to low permeability through absorptive epithelia, degradation and metabolism that lead to poor bioavailability. Attempting to overcome such limitations, an antihypertensive peptide derived from whey protein, with KGYGGVSLPEW sequence, was incorporated for the first time into polymeric nanoparticles. An experimental design was followed in order to optimize drug-loading, association efficiency, mean particle size, zeta-potential and polydispersity index of a formulation of poly(lactic-co-glycolic acid) (PLGA) nanoparticles as carriers for bioactive peptides. In sequence, peptide-loaded PLGA nanoparticles were incorporated in a guar-gum film matrix, resulting in a combined delivery system aiming to promote slow release and permeation across buccal epithelium. Neither PLGA nanoparticles, guar-gum films nor the conjugation of PLGA nanoparticles and guar-gum films (GfNp) significantly compromised in vitro TR146 human buccal carcinoma cell line viability after 12 h contact, as assessed by 3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide reduction assay (MTT). In vitro release assay for developed formulations allowed to conclude that the combination of orodispersible film and nanoparticles granted a slower release of AhP when compared with PLGA or guar-gum films alone or with control. GfNp offered more effective, synergistic, in vitro permeation of TR146 cell multilayer in comparison with guar-gum films or PLGA nanoparticles alone. The combination of PLGA nanoparticles with guar-gum films represent a suitable alternative to conventional per os delivery systems, leading to an increased buccal permeability of carried antihypertensive peptide. Copyright © 2018 Elsevier B.V. All rights reserved.

  13. Investigation of cellular fatty acid composition of Xanthomonas spp. as chemical markers of productivity and quality of xanthan gum.

    PubMed

    Miranda, Andrea Lobo; Costa, Samantha Serra; Assis, Denilson de Jesus; Andrade, Bianca Bomfim; de Souza, Carolina Oliveira; Oliveira, Maria Beatriz Prior Pinto; Guimarães, Alaíse Gil; Druzian, Janice Izabel

    2018-07-15

    In this study, we investigated the cellular fatty acid profiles of different Xanthomonas pathovars producing xanthan gum and explored the fatty acid composition to identify chemical markers of xanthan gum productivity and quality. Three Xanthomonas pathovars were studied. The fermentation was conducted for 168 h. Samples from the fermented medium were collected for extraction, quantification, and characterization of xanthan. The unsaturated/saturated (U/S) fatty acid ratio in Xanthomonas cells during fermentation was correlated with production, viscosity, and molecular weight of the gum obtained at each 24 h. The Xanthomonas axonopodis pv manihotis 290 strain showed a higher U/S ratio for major cell fatty acids (C16:1ω7/C16:0) as compared with the other two strains; this high ratio was directly associated with xanthan production. No correlation was observed between cellular fatty acid composition and characteristics of xanthan synthesized. Thus, it was possible to determine a production chemical marker for xanthan gum in Xanthomonas strains. Copyright © 2018 Elsevier Ltd. All rights reserved.

  14. Importance of the rate of hydration of pharmaceutical preparations of guar gum; a new in vitro monitoring method.

    PubMed

    Ellis, P R; Morris, E R

    1991-05-01

    Dietary supplements of guar gum are known to improve blood glucose control in diabetic patients. The efficacy of guar is probably dependent mainly upon its capacity to hydrate rapidly and thus to increase viscosity in the small intestine post-prandially. Measurement of the rate of hydration in vitro might therefore be a useful index of the effectiveness of guar formulations. A simple method for monitoring the hydration rate of guar gum has been developed, which involves measuring the changes in viscosity at discrete time intervals over a period of 5 h using a Brookfield RVT rotoviscometer. Six different samples of guar gum (four pharmaceutical preparations and two food grades of guar flour) were hydrated in sealed glass jars rotated at 6 rev min-1 in order to prevent particle aggregation. Marked differences in hydration rate and ultimate (maximum) viscosity between the different guar samples were observed. Three of the four pharmaceutical preparations were lower in viscosity than the food grades of guar flour during the first 60 min of hydration. Two of the preparations hydrated so slowly that even after 5 h they attained viscosity levels of only 60% of their ultimate viscosity. These results may explain why some guar gum preparations are clinically ineffective.

  15. Effects of dietary oat, barley, and guar gums on serum and liver lipid concentrations in diet-induced hypertriglyceridemic rats.

    PubMed

    Oda, T; Aoe, S; Imanishi, S; Kanazawa, Y; Sanada, H; Ayano, Y

    1994-04-01

    Effects of dietary oat, barley, and guar gums on serum and liver triglyceride or cholesterol concentrations were examined in diet-induced hypertriglyceridemic rats. Male Sprague-Dawley rats were fed a hypertriglyceridemic diet that contained 20% coconut oil, 17.5% fructose, 17.5% sucrose, and 5% cellulose at 4 weeks of age for 14 days. In the gum-supplemented diets, 2% cellulose was replaced by oat gum, barley gum, or guar gum. Hypertriglyceridemia was observed in the control group, whereas serum cholesterol concentration was not increased. All of the gums lowered serum and liver cholesterol concentrations except barley gum which had no significant effect on liver cholesterol. Both oat and barley gums suppressed the elevation of serum and liver triglyceride concentrations but guar gum had no effect.

  16. The effect of guar gum on carbohydrate-, fat- and protein-stimulated gut hormone secretion: modification of postprandial gastric inhibitory polypeptide and gastrin responses.

    PubMed

    Morgan, L M; Tredger, J A; Madden, A; Kwasowski, P; Marks, V

    1985-05-01

    The effect of incorporating guar gum into predominantly single-component meals of carbohydrate, fat or protein on liquid gastric emptying and on the secretion of gastric inhibitory polypeptide (GIP), gastrin and motilin, was studied in healthy human volunteers. Volunteers were given either 80 ml Hycal (carbohydrate meal), 150 g cooked lean minced beef (protein meal) or 200 ml double cream (fat meal) either with or without 5 or 6 g guar gum. Liquid gastric emptying was monitored in the fat and protein meals by taking 1.5 g paracetamol, consumed in water, with the meals and monitoring its appearance in circulation. Postprandial insulin and GIP levels were both significantly reduced by addition of guar gum to the carbohydrate meal. Postprandial GIP secretion was also reduced by addition of guar gum to the protein meal, but protein-stimulated gastrin secretion was enhanced by guar gum. There was a significant negative correlation between peak circulating gastrin levels and the corresponding GIP levels. Postprandial GIP secretion and plasma motilin levels were unaffected by addition of guar gum to the fat meal. 5 and 10 g guar gum/l solutions in water possessed buffering capacities between pH 2.75 and 5.5. Guar gum at 5 g/l caused no detectable change in liquid gastric-emptying time. The observed augmentation of gastrin secretion by guar gum following a protein meal could be due either to the buffering capacity of guar gum or to the attenuation of GIP secretion. It is possible that the chronic use of guar gum could be associated with changes in gastric acid secretion.

  17. Graft polymerization of guar gum with acryl amide irradiated by microwaves for colonic drug delivery.

    PubMed

    Shahid, Muhammad; Bukhari, Shazia Anwer; Gul, Yousra; Munir, Hira; Anjum, Fozia; Zuber, Mohammad; Jamil, Tahir; Zia, Khalid Mahmood

    2013-11-01

    This article is aimed to discuss the modification of guar gum through microwave irradiation by varying the time of irradiation. The characterization of the modified products was carried out using FTIR spectroscopic analysis. The FT-IR spectrum of the pure guar gum (GG) sample showed a broad peak at 3298 cm(-1) while the modified GG sample displayed a peak at 1541 cm(-1) which was absent in the crude sample. The X-ray diffraction (XRD) analysis confirmed the increase in crystallinity due to grafting of the sample with polyacrylamide (GG-g-PAM). Scanning electron microscope (SEM) images revealed that granular form of guar gum was changed into fibrillar structure after grafting. Thermo-gravimetric analysis of the modified samples was also carried out and discussed. The role of guar gum as a matrix for controlled release of drug triamcinolone was evaluated. The GG-acrylamide grafted samples presented a correlation between drug release and time of microwave exposure. The results revealed that such modified product has potential applications in colonic drug delivery system. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Guar gum and reduction of post-prandial glycaemia: effect of incorporation into solid food, liquid food, and both.

    PubMed

    Wolever, T M; Jenkins, D J; Nineham, R; Alberti, K G

    1979-05-01

    1. The influence of the dose and the form in which guar gum was given on the degree of "flattening" of blood glucose curves was studied in five subjects using meals of bread and soup containing 5 or 10 g guar gum. 2. When 5 g guar gum was added to bread the peak increase of blood glucose was reduced by 41% (P less than 0.002), with 5 g guar in soup, the reduction was 54% (P less than 0.001) while a reduction of 68% (P less than 0.001) was seen with 10 g guar gum (5 g in bread and 5 g in soup). The corresponding reduction in insulin peak increases were 37% (P less than 0.002), 50% (P less than 0.001) and 65% (P less than 0.001) respectively. 3. The difference between the two 5 g doses was significant with respect to the reduction of the peak increases in blood glucose and serum insulin; however the difference between the 5 g dose in bread and the 10 g dose was significantly different (P less than 0.02 for glucose, P less than 0.01 for insulin). 4. The results indicate that as little as 5 g guar gum may reduce the glycaemia following a 45 g carbohydrate meal, but perhaps due to earlier and more complete mixing, guar gum is most effective when added to the liquid phase of the meal.

  19. Xanthan gum as a fat replacer in goshtaba-a traditional meat product of India: effects on quality and oxidative stability.

    PubMed

    Rather, Sajad A; Masoodi, F A; Akhter, Rehana; Gani, Adil; Wani, S M; Malik, A H

    2015-12-01

    Goshtaba is a restructured meat product of Kashmiri wazwan prepared from meat emulsion with added fat (20 %), salt, spices and condiments and cooked in the curd. The present study was undertaken for the development of low fat goshtaba with the addition of xanthan gum as a fat replacer and was evaluated for proximate composition, pH, colour, lipid and protein oxidation, texture, microstructure and sensory properties. Low fat goshtaba formulations containing xanthan gum were higher in protein and moisture contents but, lower in fat content and pH value than the high fat control (p < 0.05). Colour evaluation revealed that high fat goshtaba had significantly higher L* value, but lower a* value than its low fat counterparts (p < 0.05). The significant decrease of TBARS values, protein carbonyls and loss of protein sulphydryl groups in low fat goshtaba formulations reflects the potential antioxidant activity of xanthan gum (p < 0.05). Hardness was significantly higher in high fat control but, cohesiveness, gumminess, and chewiness did not show any significant difference. Springiness increased with the increasing concentration of xanthan gum (0.5-1.5 %) and was higher in low fat product containing 1.5 % xanthan gum. SEM results indicate that xanthan gum lead to formation of an additional gel network which holds more water. Sensory evaluation revealed that goshtaba product with 0.5 % xanthan gum had quality characteristics that were similar to the control product containing 20 % fat.

  20. The effect of guar gum on the distribution of a radiolabelled meal in the gastrointestinal tract of the rat.

    PubMed

    Brown, N J; Worlding, J; Rumsey, R D; Read, N W

    1988-03-01

    1. The effect of addition of guar gum (5 and 10 g/l) to a radiolabelled, homogenized, baked-bean test meal on the distribution of that meal in the gastrointestinal tract was investigated in groups of male rats killed at 25, 50, 100, 200, 300 and 400 min after gavage. 2. Addition of 5 and 10 g guar gum/l significantly increased the proportion of the meal remaining in the stomach at 25 and 50 min after gavage (P less than 0.01). 3. The heads of the control meal and meals containing guar gum reached the distal intestine within 25 min after gavage but radioactivity was not observed in the caecum until 100 min after administration of each of the meals. Addition of guar gum (5 and 10 g/l) delayed caecal filling even though the head of each meal reached the caecum at the same time after gavage. 4. The geometric centres of guar-gum-containing meals were proximal to that of the control meal at all times after gavage. 5. The observed delay in the passage of a guar-gum-containing meal through the stomach and small intestine is probably due to the viscous nature of the meal resisting the propulsive and mixing effects of the gastrointestinal contractions, thereby reducing access of the glucose to the absorptive epithelium. This could contribute to the observed reductions in postprandial glycaemia seen in previous studies after incorporating guar gum into a meal.

  1. Effect of incorporation of pumpkin (Cucurbita moshchata) powder and guar gum on the rheological properties of wheat flour.

    PubMed

    Kundu, Himani; Grewal, Raj Bala; Goyal, Ankit; Upadhyay, Neelam; Prakash, Saurabh

    2014-10-01

    The present study was carried out to study the effect of incorporation of fibre rich pumpkin powder and guar gum on the farinographic characteristics of wheat flour. The flour and pumpkin powder were assessed for proximate composition, total dietary fibre, minerals and β-carotene. Pumpkin powder contained appreciable amount of fibre, minerals and β-carotene. The effects of incorporation of different levels of pumpkin powder and guar gum along with pumpkin powder on farinographic characteristics were studied. Dough development time, dough stability, time to break down and farinograph quality number increased whereas mixing tolerance index decreased with incorporation of pumpkin powder (> 5 %) and guar gum (1.0 and 1.5 %) along with pumpkin powder in the flour. Resistance to extension as well as extensibility of dough prepared increased significantly by adding pumpkin powder (5-15 %) whereas increase in resistance to extension only was noticed with inclusion of guar gum (0.5-1.5 %) to flour containing 5 % pumpkin powder. Results indicated that pumpkin can be processed to powder that can be utilized with guar gum for value addition.

  2. Chemical and Physical Properties, Safety and Application of Partially Hydrolized Guar Gum as Dietary Fiber

    PubMed Central

    Yoon, Seon-Joo; Chu, Djong-Chi; Raj Juneja, Lekh

    2008-01-01

    The ideal water-soluble dietary fiber for the fiber-enrichment of foods must be very low in viscosity, tasteless, odorless, and should produce clear solutions in beverages. Partially hydrolyzed guar gum (PHGG) produced from guar gum by enzymatic process has the same chemical structure with intact guar gum but less than one-tenth the original molecular length of guar gum, which make available to be used as film former, foam stabilizer and swelling agent. The viscosity of PHGG is about 10 mPa·s in 5% aqueous solution, whereas 1% solution of guar gum shows range from 2,000 to 3,000 mPa·s. In addition, PHGG is greatly stable against low pH, heat, acid and digestive enzyme. For these reasons, PHGG seems to be one of the most beneficial dietary fiber materials. It also showed that interesting physiological functions still fully exert the nutritional function of a dietary fiber. PHGG has, therefore, been used primarily for a nutritional purpose and became fully integrated food material without altering the rheology, taste, texture and color of final products. PHGG named as Benefiber® in USA has self-affirmation on GRAS status of standard grade PHGG. PHGG named as Sunfiber® is now being used in various beverages, food products and medicinal foods as a safe, natural and functional dietary fiber in all over the world. PMID:18231623

  3. Colon targeted guar gum compression coated tablets of flurbiprofen: formulation, development, and pharmacokinetics.

    PubMed

    Vemula, Sateesh Kumar; Bontha, Vijaya Kumar

    2013-01-01

    The rationale of the present study is to formulate flurbiprofen colon targeted compression coated tablets using guar gum to improve the therapeutic efficacy by increasing drug levels in colon, and also to reduce the side effects in upper gastrointestinal tract. Direct compression method was used to prepare flurbiprofen core tablets, and they were compression coated with guar gum. Then the tablets were optimized with the support of in vitro dissolution studies, and further it was proved by pharmacokinetic studies. The optimized formulation (F4) showed almost complete drug release in the colon (99.86%) within 24 h without drug loss in the initial lag period of 5 h (only 6.84% drug release was observed during this period). The pharmacokinetic estimations proved the capability of guar gum compression coated tablets to achieve colon targeting. The C(max) of colon targeted tablets was 11956.15 ng/mL at T max of 10 h whereas it was 15677.52 ng/mL at 3 h in case of immediate release tablets. The area under the curve for the immediate release and compression coated tablets was 40385.78 and 78214.50 ng-h/mL and the mean resident time was 3.49 and 10.78 h, respectively. In conclusion, formulation of guar gum compression coated tablets was appropriate for colon targeting of flurbiprofen.

  4. Guar gum as efficient non-toxic inhibitor of carbon steel corrosion in phosphoric acid medium: Electrochemical, surface, DFT and MD simulations studies

    NASA Astrophysics Data System (ADS)

    Messali, M.; Lgaz, H.; Dassanayake, R.; Salghi, R.; Jodeh, S.; Abidi, N.; Hamed, O.

    2017-10-01

    Guar gum is a water-soluble, nonionic, nontoxic, biodegradable and biocompatible hetero polysaccharide with unlimited number of industrial applications. In this study, guar gum was evaluated as a natural inhibitor of carbon steel (CS) corrosion in 2 M H3PO4 solution. The characteristic effect of guar gum on the steel corrosion was studied at concentration ranges from 0.1 to 1.0 g/L at 298-328 K by weight loss and electrochemical methods. Obtained results showed that, the inhibition efficiency (η%) of guar gum decreased slightly when the temperature increased and increased by increasing the inhibitor concentration reaching the maximum value at 1.0 g/L. The adsorption of guar gum on steel surface was studied by the Temkin adsorption model. EIS measurements indicate that the values of the polarization resistance (Rp) of CS in presence of guar gum are significantly higher than that of the untreated surface. Steel surface coated with guar gum was analyzed by SEM, FTIR and XRD. The quantum calculations using DFT method and Molecular Dynamic (MD) simulations were performed to define the relationship between inhibition performance of investigated compound and their molecular structure.

  5. Role of viscous guar gums in lowering the glycemic response after a solid meal.

    PubMed

    Leclère, C J; Champ, M; Boillot, J; Guille, G; Lecannu, G; Molis, C; Bornet, F; Krempf, M; Delort-Laval, J; Galmiche, J P

    1994-04-01

    The aim of the present study was to investigate how guar gum viscosity acts on starch digestion and glucose absorption in humans. Six healthy subjects received a mixed diet composed of 60.4% carbohydrate in the form of maize glucose or pregelatinized starch, to which was added 5.6% low- or high-viscosity guar gums. Meals were ingested or instilled in the duodenum and postprandial insulin and glucose responses were monitored for 3 h. Infusion of meals containing glucose showed that the delay in the diffusion rate to the duodenal mucosa due to bolus viscosity was not significant. Infusion of meals containing starch showed that a decrease in the digestion rate of starch in the upper small intestine accounted for part of the effect of viscosity on glycemic response, whereas the main effect of guar gum was apparently to slow gastric emptying.

  6. Bioadhesive Controlled Metronidazole Release Matrix Based on Chitosan and Xanthan Gum

    PubMed Central

    Eftaiha, Ala’a F.; Qinna, Nidal; Rashid, Iyad S.; Al Remawi, Mayyas M.; Al Shami, Munther R.; Arafat, Tawfiq A.; Badwan, Adnan A.

    2010-01-01

    Metronidazole, a common antibacterial drug, was incorporated into a hydrophilic polymer matrix composed of chitosan xanthan gum mixture. Hydrogel formation of this binary chitosan-xanthan gum combination was tested for its ability to control the release of metronidazole as a drug model. This preparation (MZ-CR) was characterized by in vitro, ex vivo bioadhesion and in vivo bioavailability study. For comparison purposes a commercial extended release formulation of metronidazole (CMZ) was used as a reference. The in vitro drug-release profiles of metronidazole preparation and CMZ were similar in 0.1 M HCl and phosphate buffer pH 6.8. Moreover, metronidazole preparation and CMZ showed a similar detachment force to sheep stomach mucosa, while the bioadhesion of the metronidazole preparation was higher three times than CMZ to sheep duodenum. The results of in vivo study indicated that the absorption of metronidazole from the preparation was faster than that of CMZ. Also, MZ-CR leads to higher metronidazole Cmax and AUC relative to that of the CMZ. This increase in bioavailability might be explained by the bioadhesion of the preparation at the upper part of the small intestine that could result in an increase in the overall intestinal transit time. As a conclusion, formulating chitosan-xanthan gum mixture as a hydrophilic polymer matrix resulted in a superior pharmacokinetic parameters translated by better rate and extent of absorption of metronidazole. PMID:20559494

  7. Thermodynamic compatibility and interactions between Speckled Sugar bean protein and xanthan gum for production of multilayer O/W emulsion.

    PubMed

    Rahmati, Nazanin Fatemeh; Koocheki, Arash; Varidi, Mehdi; Kadkhodaee, Rassoul

    2018-03-01

    Thermodynamic compatibility and probable interactions between Speckled Sugar been protein (SSBP) and xanthan gum for production of multilayer O/W emulsion (30% oil) were investigated. Different interactions were observed between SSBP and xanthan at different pH (3-7) including electrostatic interactions and hydrogen bonding. These interactions were predominant at pH 3. When low xanthan gum concentration (0.1%) was used, phase separation and complex coacervation observed at this pH (negative effect of interactions). However, at pH 5, only 0.1% xanthan was enough to drastically reduce non-dissolved protein and its precipitation which normally occurs at this pH. In addition, incompatibility or segregative phase behavior which normally occurs when protein and polysaccharide have same charges was not observed (positive effects of interactions). Protein-gum interactions influenced emulsion properties (zeta potential, particle size, PDI, rheology, emulsion capacity, heat stability and creaming rate). Interactions had considerable influence on emulsion shelf life and produced completely stable emulsions at all pH values. Results confirmed that SSBP-xanthan gum mixture has a high potential for production of multilayer emulsions.

  8. Physicochemical properties of exopolysaccharide produced by Lactobacillus kefiranofaciens ZW3 isolated from Tibet kefir.

    PubMed

    Wang, Yanping; Ahmed, Zaheer; Feng, Wu; Li, Chao; Song, Shiying

    2008-10-01

    An exopolysaccharide (EPS) producing strain, ZW3, was isolated from Tibet kefir grain and was identified as Lactobacillus kefiranofaciens. FT-IR spectroscopy revealed the presence of carboxyl, hydroxyl, and amide groups, which correspond to a typical heteropolymeric polysaccharide. The GC analysis of ZW3 EPS revealed that it was glucogalactan in nature. Exopolymer showed similar flocculation stability like xanthan gum but better than guar gum with a melting point of 93.38 degrees C which is lower than xanthan gum (153.4 degrees C) and guar gum (490.11 degrees C). Compared with other commercially available hydrocolloids like xanthan gum, guar gum and locust gum ZW3 EPS showed much better emulsifying capability.

  9. Synthesis of oxidized guar gum by dry method and its application in reactive dye printing.

    PubMed

    Gong, Honghong; Liu, Mingzhu; Zhang, Bing; Cui, Dapeng; Gao, Chunmei; Ni, Boli; Chen, Jiucun

    2011-12-01

    The aim of this study was to prepare oxidized guar gum with a simple dry method, basing on guar gum, hydrogen peroxide and a small amount of solvent. To obtain a product with suitable viscosity for reactive dye printing, the effects of various factors such as the amount of oxidant and solvent, reaction temperature and time were studied with respect to the viscosity of reaction products. The product was characterized by Fourier transform infrared spectroscopy, size exclusion chromatography, scanning electron microscopy and differential scanning calorimetry. The hydrated rate of guar gum and oxidized guar gum was estimated through measuring the required time when their solutions (1%, w/v) reached the maximum viscosity. The effects of the salt concentration and pH on viscosity of the resultant product were studied. The mixed paste containing oxidized guar gum and carboxymethyl starch was prepared and its viscosity was determined by the viscometer. The rheological property of the mixed paste was appraised by the printing viscosity index. In addition, the applied effect of mixed paste in reactive dye printing was examined by assessing the fabric stiffness, color yield and sharp edge to the printed image in comparison with sodium alginate. And the results indicated that the mixed paste could partially replace sodium alginate as thickener in reactive dye printing. The study also showed that the method was low cost and eco-friendly and the product would have an extensive application in reactive dye printing. Copyright © 2011 Elsevier B.V. All rights reserved.

  10. Colon Targeted Guar Gum Compression Coated Tablets of Flurbiprofen: Formulation, Development, and Pharmacokinetics

    PubMed Central

    Bontha, Vijaya Kumar

    2013-01-01

    The rationale of the present study is to formulate flurbiprofen colon targeted compression coated tablets using guar gum to improve the therapeutic efficacy by increasing drug levels in colon, and also to reduce the side effects in upper gastrointestinal tract. Direct compression method was used to prepare flurbiprofen core tablets, and they were compression coated with guar gum. Then the tablets were optimized with the support of in vitro dissolution studies, and further it was proved by pharmacokinetic studies. The optimized formulation (F4) showed almost complete drug release in the colon (99.86%) within 24 h without drug loss in the initial lag period of 5 h (only 6.84% drug release was observed during this period). The pharmacokinetic estimations proved the capability of guar gum compression coated tablets to achieve colon targeting. The C max of colon targeted tablets was 11956.15 ng/mL at T max of 10 h whereas it was 15677.52 ng/mL at 3 h in case of immediate release tablets. The area under the curve for the immediate release and compression coated tablets was 40385.78 and 78214.50 ng-h/mL and the mean resident time was 3.49 and 10.78 h, respectively. In conclusion, formulation of guar gum compression coated tablets was appropriate for colon targeting of flurbiprofen. PMID:24260738

  11. Role of background ions in guar gum adsorption on oxide minerals and kaolinite.

    PubMed

    Ma, Xiaodong; Pawlik, Marek

    2007-09-15

    Adsorption of guar gum onto alumina, titania (rutile), hematite, quartz, and kaolinite was investigated as a function of pH, ionic strength (from distilled water to saturated NaCl and KCl), and the type of background electrolyte (0.01 mol/L LiCl, NaCl, KCl, and CsCl). It was demonstrated that the adsorption density of the polymer does not depend on pH for any of the tested minerals, so only hydrogen bonding was identified as the dominant adsorption mechanism. The minerals could, however, be divided into two groups depending on the effect of the salt type on polymer adsorption. Guar gum adsorption onto quartz and kaolinite significantly increased in the presence of even a small amount of KCl, while NaCl equally enhanced guar gum adsorption on these two minerals only at concentrations approaching saturation. In contrast, no significant differences between the effects of KCl and NaCl on polysaccharide adsorption were observed on titania, alumina, and hematite. The results were correlated with the chaotropic (KCl) and kosmotropic (NaCl) properties of the background salts, and-based on a review of the available literature data-with the presence (quartz) or absence (titania, alumina, hematite) of an extensive hydration layer on the oxide surfaces. It was concluded that the main role of background ions in the studied systems was to control the stability of the interfacial water layer on oxide particles whose presence serves as a barrier to guar gum adsorption.

  12. Guar gum as a promising starting material for diverse applications: A review.

    PubMed

    Thombare, Nandkishore; Jha, Usha; Mishra, Sumit; Siddiqui, M Z

    2016-07-01

    Guar gum is the powdered endosperm of the seeds of the Cyamopsis tetragonolobus which is a leguminous crop. The endosperm contains a complex polysaccharide called galactomannan, which is a polymer of d-galactose and d-mannose. This hydroxyl group rich polymer when added to water forms hydrogen bonding imparting significant viscosity and thickening to the solution. Due to its thickening, emulsifying, binding and gelling properties, quick solubility in cold water, wide pH stability, film forming ability and biodegradability, it finds applications in large number of industries. In last few decades a lot of research has been done on guar gum to fit it into particular application, as such or by its structural modifications. This review gives an overview of the nature, chemistry and properties of guar gum and discusses recent developments in its modifications and applications in major industries like hydraulic fracturing, explosives, food, agriculture, textile, paper, cosmetics, bioremediation, drug delivery, medical and pharmaceuticals. This article would help researchers engaged in biopolymer area and other end-users who want to begin research in natural polysaccharides. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Preparation and characterization of cross-linked excipient of coprocessed xanthan gum-acacia gum as matrix for sustained release tablets

    NASA Astrophysics Data System (ADS)

    Surini, Silvia; Wati, Dina Risma; Syahdi, Rezi Riadhi

    2018-02-01

    Sustained release tablet is solid dosage form which is designed to release drugs slowly in the body. This research was intended to prepare and characterize the cross-linked excipients of co-processed xanthan gum-acacia gum (CL-Co-XGGA) as matrices for sustained release tablets with gliclazide as a model drug. CL-Co-XGGA excipients were cross-linked materials of co-processed excipients of xanthan gum-acacia gum (Co-XGGA) using sodium trimetaphosphate. Co-processed excipients of xanthan gum-acacia gum were prepared in the ratio of each excipient 1:2, 1:1 and 2:1. Co-XGGA and CL-Co-XGGA excipients were characterized physically, chemically and functionally. Then, the sustained release (SR) tablets were formulated by wet granulation method using CL-Co-XGGA excipients as matrices. Also, the dissolution study of the gliclazide SR tablets was carried out in phosphate buffer medium pH 7,4 containing sodium lauryl sulphate 0.2% for 12 hours. The results showed that the degree of substitution (DS) of CL-Co-XGGA 1:2, 1:1, 2:1 excipients were respectively 0.067, 0.082 and 0.08. Besides that, the excipients gel strengths were 14.03, 17.27 and 20,70 gF, respectively. The cross-linked excipients had improved flow properties and swelling capability compared to the Co-XGGA excipients. The results of the gliclazide SR tablets evaluations showed that all tablets were passed all tablet requirements. Moreover, the gliclazide release from SR tablets F1 - F6 revealed the sustained release profile, which was following zero order kinetics (F1, F2, F3, F6) and Higuchi kinetics (F4 and F5). It could be concluded that the obtained CL-Co-XGGA excipients might be used as matrices for sustained release tablets and could retard drug release up to 8 until 32 hours.

  14. TECHNICAL NOTE: The strengthening effect of guar gum on the yield stress of magnetorheological fluid

    NASA Astrophysics Data System (ADS)

    Wu, Wei Ping; Zhao, Bin Yuan; Wu, Qing; Chen, LeSheng; Hu, Ke Ao

    2006-08-01

    In this paper we present a novel approach for producing obvious strengthening of the magnetorheological (MR) effect of MR fluids. Carbonyl iron powders coated with guar gum were used as magnetic particles in the MR fluid. Experimental results showed that inducing a guar gum coating not only greatly improved the sedimentation stability but also strengthened the yield stress of the MR fluid. An intermolecular force based model was proposed for explaining the strengthening effect.

  15. Reversible obstructive sleep apnea caused by occupational exposure to guar gum dust.

    PubMed

    Leznoff, A; Haight, J S; Hoffstein, V

    1986-05-01

    This report describes a case of reversible obstructive sleep apnea caused by occupational exposure to an inhaled allergen, guar gum powder. The patient, a pet food plant employee, also experienced severe cough, rhinitis, and conjunctivitis. Skin tests confirmed the specific guar allergy. Pharyngeal cross-sectional area was smaller than normal. Pulmonary function studies, histamine challenge tests, nasal air-flow resistance measurements, and nocturnal polysomnography were performed on 3 separate occasions: while the patient was working at his usual occupation, at the end of a 3-wk holiday, and after a guar dust challenge in an inhalation chamber. Pulmonary function and histamine challenge tests were consistently normal. At the time of the initial tests, nasal resistance was elevated, and nocturnal polysomnography revealed obstructive sleep apnea. After absence from work, obstructive sleep apnea resolved, and the nasal resistance returned to normal. After challenge with guar gum dust, the patient developed increased resistance to nasal air flow, and obstructive sleep apnea reappeared. This case demonstrates that allergy can cause reversible obstructive sleep apnea and that occupational exposure should be considered in the assessment of patients with this disease.

  16. Kinetic degradation of guar gum in oilfield wastewater by photo-Fenton process.

    PubMed

    Wang, Shunwu; Li, Ziwang; Yu, Qinglong

    2017-01-01

    Guar gum is considered as a main component of oilfield wastewater. This work is intended to optimize the experimental conditions (H 2 O 2 dosage, Fe 2+ dosage, initial concentration of organics, initial pH and temperature) for the maximum oxidative degradation of guar gum by Fenton's reagent. The kinetics of guar gum removal were evaluated by means of the chemical oxygen demand (COD) and the absorbance measurements. The batch experiment results showed that the optimum conditions were: H 2 O 2 dosage, 10,000 mg/L; Fe 2+ dosage, 2,000 mg/L; initial concentration of organics, 413 mg/L; pH, 3 and temperature, 35 °C, under which the COD removal could reach 61.07% and fairly good stability could be obtained. Under the optimum experimental conditions, using UV irradiation to treat the wastewater, the photo-Fenton systems can successfully eliminate COD from guar gum solution. The COD removal always obeyed a pseudo-first-order kinetics and the degradation rate (k app ) was increased by 25.7% in the photo-Fenton process compared to the Fenton process. The photo-Fenton system needed less time and consequently less quantity of H 2 O 2 to obtain the same results as the Fenton process. The photo-Fenton process needs a dose of H 2 O 2 20.46% lower than that used in the Fenton process to remove 79.54% of COD. The cost of the photo/Fenton process amounted to RMB9.43/m 3 , which was lower than that of the classic Fenton process alone (RMB10.58/m 3 ) and the overall water quality of the final effluent could meet the class Ι national wastewater discharge standard for the petrochemical industry of China.

  17. A new breakfast cereal containing guar gum reduces postprandial plasma glucose and insulin concentrations in normal-weight human subjects.

    PubMed

    Fairchild, R M; Ellis, P R; Byrne, A J; Luzio, S D; Mir, M A

    1996-07-01

    A new guar-containing wheatflake product was developed to assess its effect on carbohydrate tolerance in normal-weight, healthy subjects. The extruded wheatflake breakfast cereals containing 0 (control) or approximately 90 g guar gum/kg DM were fed to ten fasting, normal-weight, healthy subjects using a repeated measures design. The meals were similar in energy (approximately 1.8 MJ), available carbohydrate (78 g), protein (15 g) and fat (5.4 g) content. The guar gum content of the test meals was 6.3 g. Venous blood samples were taken fasting and at 15, 30, 45, 60, 90, 120, 150 and 240 min after commencing each breakfast and analysed for plasma glucose, insulin and C-peptide. The guar wheatflake meal produced a significant main effect for glucose and insulin at 0-60 min and 0-240 min time intervals respectively, but not for the C-peptide levels compared with the control meal. Significant reductions in postprandial glucose and insulin responses were seen following the guar wheatflake meal compared with the control meal at 15 and 60 min (glucose) and 15, 60, 90 and 120 min (insulin). The 60 and 120 min areas under the curve for glucose and insulin were significantly reduced by the guar gum meal, as was the 240 min area under the curve for insulin. Thus, it can be concluded that the use of a severe method of heat extrusion to produce guar wheatflakes does not diminish the physiological activity of the guar gum.

  18. Guar gum does not impair the absorption and utilization of dietary nitrogen but affects early endogenous urea kinetics in humans.

    PubMed

    Mariotti, F; Pueyo, M E; Tomé, D; Benamouzig, R; Mahé, S

    2001-10-01

    Viscous gums enhance viscosity in the upper gastrointestinal lumen, quickly disturbing motility and promoting fluid secretion. We sought to determine whether guar gum could acutely affect the absorption and utilization of dietary nitrogen and whether these luminal effects could also perturb the kinetics of urea. We studied the short-term effect of adding 1% of highly viscous guar gum to a (15)N-labeled protein meal (30 g soy protein isolate in 500 mL water) during the postprandial phase in humans. The effects on bioavailability were studied by using the [(13)C]glycine breath test (to assess gastric emptying) and (15)N enrichment in plasma amino acids (for systemic amino acid bioavailability). The kinetics of dietary and endogenous urea were assessed in plasma and urine. Guar gum modulated the gastric emptying kinetics of the liquid phase of the meal slightly (P < 0.05), but had no significant effect on either the systemic appearance of dietary amino acids or plasma and urinary dietary urea kinetics. Without significantly affecting plasma urea concentrations, guar gum reduced by approximately 40% the urinary excretion of endogenous urea for the first 2-h period after the meal (P < 0.01), although endogenous urinary excretion was similar at later stages. Guar gum did not significantly affect the bioavailability or utilization of dietary protein. We showed an early effect of guar gum on endogenous urea kinetics, which most probably arose from very early, short-term stimulation of the intestinal disposal of endogenous urea, at the expense of its urinary excretion.

  19. Molecular Properties of Guar Gum and Pectin Modify Cecal Bile Acids, Microbiota, and Plasma Lipopolysaccharide-Binding Protein in Rats

    PubMed Central

    Ghaffarzadegan, Tannaz; Marungruang, Nittaya; Fåk, Frida; Nyman, Margareta

    2016-01-01

    Bile acids (BAs) act as signaling molecules in various physiological processes, and are related to colonic microbiota composition as well as to different types of dietary fat and fiber. This study investigated whether guar gum and pectin—two fibers with distinct functional characteristics—affect BA profiles, microbiota composition, and gut metabolites in rats. Low- (LM) or high-methoxylated (HM) pectin, and low-, medium-, or high-molecular-weight (MW) guar gum were administered to rats that were fed either low- or high-fat diets. Cecal BAs, short-chain fatty acids (SCFA) and microbiota composition, and plasma lipopolysaccharide-binding protein (LBP) levels were analyzed, by using novel methodologies based on gas chromatography (BAs and SCFAs) and 16S rRNA gene sequencing on the Illumina MiSeq platform. Strong correlations were observed between cecal BA and SCFA levels, microbiota composition, and portal plasma LBP levels in rats on a high-fat diet. Notably, guar gum consumption with medium-MW increased the cecal amounts of cholic-, chenodeoxycholic-, and ursodeoxycholic acids as well as α-, β-, and ω-muricholic acids to a greater extent than other types of guar gum or the fiber-free control diet. In contrast, the amounts of cecal deoxycholic- and hyodeoxycholic acid were reduced with all types of guar gum independent of chain length. Differences in BA composition between pectin groups were less obvious, but cecal levels of α- and ω-muricholic acids were higher in rats fed LM as compared to HM pectin or the control diet. The inflammatory marker LBP was downregulated in rats fed medium-MW guar gum and HM pectin; these two fibers decreased the cecal abundance of Oscillospira and an unclassified genus in Ruminococcaceae, and increased that of an unclassified family in RF32. These results indicate that the molecular properties of guar gum and pectin are important for their ability to modulate cecal BA formation, gut microbiota composition, and high-fat diet

  20. Guar gum based biodegradable, antibacterial and electrically conductive hydrogels.

    PubMed

    Kaith, Balbir S; Sharma, Reena; Kalia, Susheel

    2015-04-01

    Guar gum-polyacrylic acid-polyaniline based biodegradable electrically conductive interpenetrating network (IPN) structures were prepared through a two-step aqueous polymerization. Hexamine and ammonium persulfate (APS) were used as a cross linker-initiator system to crosslink the poly(AA) chains on Guar gum (Ggum) backbone. Optimum reaction conditions for maximum percentage swelling (7470.23%) were time (min) = 60; vacuum (mmHg) = 450; pH = 7.0; solvent (mL) = 27.5; [APS] (mol L(-1)) = 0.306 × 10(-1); [AA] (mol L(-1)) = 0.291 × 10(-3) and [hexamine] (mol L(-1))=0.356 × 10(-1). The semi-interpenetrating networks (semi-IPNs) were converted into IPNs through impregnation of polyaniline chains under acidic and neutral conditions. Fourier transform infra-red spectroscopy (FTIR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) techniques were used to characterize the semi-IPNs and IPNs. Synthesized semi-IPNs and IPNs were further evaluated for moisture retention in different soils, antibacterial and biodegradation behavior. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Reduction of the viscosity of solutions viscosified with xanthan gum polymers

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bridges, K.L.; Kalinski, K.L.

    1991-10-08

    This patent describes a process for reducing the viscosity of a drilling fluid containing Xanthan gum polymer solution. It comprises: contacting the drilling fluid with hydrogen peroxide and adjusting the pH of the solution to a level of at least about between 8 and 10.

  2. The release kinetics of β-carotene nanocapsules/xanthan gum coating and quality changes in fresh-cut melon (cantaloupe).

    PubMed

    Zambrano-Zaragoza, María L; Quintanar-Guerrero, David; Del Real, Alicia; Piñon-Segundo, Elizabeth; Zambrano-Zaragoza, José F

    2017-02-10

    The main aim of this work was to evaluate the effect of the β-carotene release rate from nanocapsules incorporated into a xanthan gumcoating on the physical and physicochemical properties of fresh-cut melon (var. cantaloupe). Several coatings were studied: xanthan gum alone (XG), xanthan gum combined with nanocapsules (Ncs/XG), xanthan gum combined with nanospheres (Nsp/XG), nanocapsules (Ncs), and nanospheres (Nsp), all of which were compared to untreated fresh-cut melon in order to determine their preservation efficiency. The β-carotene release profiles from the Ncs and Ncs/XG treatments corresponded better to a Higuchi-type behavior (t 1/2 ) for matrix systems (R2>0.95). Also observed was a good correlation between the release of β-carotene by the Ncs/XG treatment and the minor changes observed in the whiteness index (≤10%) and firmness (≤2%). These results lead to the conclusion that incorporating β-carotene nanocapsules into a polysaccharide matrix improves the properties of the coatings, thereby increasing storage time to 21days at 4°C. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Long term effects of guar gum on metabolic control, serum cholesterol and blood pressure levels in type 2 (non-insulin-dependent) diabetic patients with high blood pressure.

    PubMed

    Uusitupa, M; Tuomilehto, J; Karttunen, P; Wolf, E

    1984-01-01

    A double-blind, placebo-controlled trial was carried out in 17 Type 2 (non-insulin-dependent) diabetic patients, treated with diet therapy alone to study the effects of guar gum on metabolic control, serum lipids, and blood pressure levels. Thirteen of the patients had drug treatment for hypertension. Guar gum was taken with meals three times a day, and the dose was gradually increased to 21 g per day. A slight, but not significant improvement was found in the metabolic control of the patients after the guar gum treatment compared to the placebo. Serum total cholesterol was 11% (p greater than 0.01) lower after the guar gum but no significant differences were found in HDL-cholesterol or serum triglycerides during the guar gum treatment compared to the placebo. Diastolic blood pressure level was significantly lower during the guar gum treatment compared to placebo. No difference was observed in systolic blood pressure levels between the guar gum and placebo treatments. The reduction of diastolic blood pressure was independent of changes in fasting blood glucose level or body weight, but could in part be due to simultaneous reduction in serum cholesterol concentration. The changes associated with guar gum supplementation suggest a reduction in the risk for cardiovascular complications in diabetic patients.

  4. Effects of a gel forming dietary fiber, guar gum, on the absorption of glibenclamide and metabolic control and serum lipids in patients with non-insulin-dependent (type 2) diabetes.

    PubMed

    Uusitupa, M; Södervik, H; Silvasti, M; Karttunen, P

    1990-04-01

    Nine patients with non-insulin-dependent diabetes (NIDDM) treated with glibenclamide (3.5 mg b.i.d.) participated in this randomized double-blind placebo controlled crossover study to evaluate the effects of granulated guar gum (5 g t.i.d. with meals) on the absorption of glibenclamide and metabolic control and serum lipids. Each treatment period lasted for 4 weeks, and there was a wash-out period of one week between the treatments. The fasting blood glucose (10.5 +/- 3.4 mmol/l on guar gum vs 11.3 +/- 3.7 mmol/l on placebo, p less than 0.05) and serum total cholesterol (5.9 +/- 1.4 mmol/l on guar gum vs 6.6 +/- 1.6 mmol/l on placebo; p less than 0.05) levels were lower after the treatment with guar gum than placebo. No significant differences were observed in serum triglycerides or HDL cholesterol between guar gum and placebo treatments. The administration of guar gum together with glibenclamide did not change significantly the maximum concentration (223 +/- 196 ng/ml on guar gum vs 184 +/- 138 ng/ml on placebo; n = 7, NS) or area under the curve (AUC0-6) [729 +/- 813 (ng/ml) X h on guar gum vs 560 +/- 513 (ng/ml) X h on placebo; NS] of glibenclamide. The fasting serum glibenclamide concentrations were similar at the end of the 4-week treatment period with guar gum and placebo. In conclusion, guar gum improved the metabolic control and decreased serum lipids of patients with NIDDM. In addition, guar gum ingested with glibenclamide did not interfere with the absorption of glibenclamide.

  5. Grafting of vinyl acetate-ethylacrylate binary monomer mixture onto guar gum.

    PubMed

    Singh, Vandana; Singh, Angela; Joshi, Sneha; Malviya, Tulika

    2016-03-01

    Present article reports on guar gum (GG) functionalization through graftcopolymerization of vinylacetate (VAC) and ethylacrylate (EA) from their binary mixtures. The potassium persulfate/ascorbic acid (KPS/AA) redox initiator system has been used for the binary grafting under the previously optimized conditions for VAC grafting at guar gum. The concentration of ascorbic acid (AA), persulfate (KPS), and grafting temperature were varied to optimize the binary grafting. A preliminary investigation revealed that the copolymer has excellent ability to capture Hg(II) from aqueous solution. It was observed that the optimum % grafting sample (CP3) was best at Hg(II) adsorption. CP3 and mercury loaded CP3 (CP3-Hg) have been extensively characterized using Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Thermo gravimetric analysis (TGA) and a plausible mechanism for the grafting has been proposed. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. Carboxymethyl guar gum synthesis in homogeneous phase and macroporous 3D scaffolds design for tissue engineering.

    PubMed

    Kundu, Sonia; Das, Aatrayee; Basu, Aalok; Ghosh, Debjani; Datta, Pallab; Mukherjee, Arup

    2018-07-01

    Guar gum (GG) is a galactomannan obtained directly from the Cyamopsis tetragonoloba seeds pericarb. The biopolymer hydrates hugely in three chain associated coil formations. Chaotropic Hofmeister ion like lithium interacts at the hydrogen bonding sites and render GG homogenization in polar solvents like dimethyl sulfoxide. This phenomenon was used for the first time for galactomannan derivatisations in homogeneous phase. Higher degree of substitution (DS) that was hereto unattainable in GG was achieved due to Hofmeister ion assisted assembly deformations. Furthermore, carboxymethyl guar gum (CMGG, DS = 1.10) blends well in poly-vinyl alcohol (PVA) at 2:1 mass ratio and enabled hydrophilic porous scaffold design for cell propagation. CMGG-PVA scaffolds porosity was 70-90% and the tensile strength was 6.32 MPa. CMGG-PVA scaffolds were useful as cell factories and in tissue engineering. New generation guar gum derivative scaffolds were non cytotoxic and permitted cell propagation in growth medium. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Effective remediation of phenol,2,4-bis(1,1-dimethylethyl) and bis(2-ethylhexyl) phthalate in farm effluent using Guar gum--A plant based biopolymer.

    PubMed

    Kee, Yang Ling; Mukherjee, Sumona; Pariatamby, Agamuthu

    2015-10-01

    This study was carried out to evaluate the efficiency of Guar gum in removing Persistent Organic Pollutants (POPs), viz. phenol,2,4-bis(1,1-dimethylethyl) and bis(2-ethylhexyl) phthalate (DEHP), from farm effluent. The removal efficiency was compared with alum. The results indicated that 4.0 mg L(-1) of Guar gum at pH 7 could remove 99.70% and 99.99% of phenol,2,4-bis(1,1-dimethylethyl) and DEHP, respectively. Box Behnken design was used for optimization of the operating parameters for optimal POPs removal. Scanning Electron Microscopy (SEM) and Fourier Transform Infrared (FTIR) spectroscopy studies were conducted on the flocs. SEM micrographs showed numerous void spaces in the flocs produced by Guar gum as opposed to those produced by alum. This indicated why Guar gum was more effective in capturing and removal of suspended particles and POPs as compared to alum. FTIR spectra indicated a shift in the bonding of functional groups in the flocs produced by Guar gum as compared to raw Guar gum powder signifying chemical attachment of the organics present in the effluent to the coagulant resulting in their removal. Guar gum is highly recommended as a substitute to chemical coagulant in treating POPs due to its non-toxic and biodegradable characteristics. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Protection against the Metabolic Syndrome by Guar Gum-Derived Short-Chain Fatty Acids Depends on Peroxisome Proliferator-Activated Receptor γ and Glucagon-Like Peptide-1

    PubMed Central

    den Besten, Gijs; Gerding, Albert; van Dijk, Theo H.; Ciapaite, Jolita; Bleeker, Aycha; van Eunen, Karen; Havinga, Rick; Groen, Albert K.; Reijngoud, Dirk-Jan; Bakker, Barbara M.

    2015-01-01

    The dietary fiber guar gum has beneficial effects on obesity, hyperglycemia and hypercholesterolemia in both humans and rodents. The major products of colonic fermentation of dietary fiber, the short-chain fatty acids (SCFAs), have been suggested to play an important role. Recently, we showed that SCFAs protect against the metabolic syndrome via a signaling cascade that involves peroxisome proliferator-activated receptor (PPAR) γ repression and AMP-activated protein kinase (AMPK) activation. In this study we investigated the molecular mechanism via which the dietary fiber guar gum protects against the metabolic syndrome. C57Bl/6J mice were fed a high-fat diet supplemented with 0% or 10% of the fiber guar gum for 12 weeks and effects on lipid and glucose metabolism were studied. We demonstrate that, like SCFAs, also guar gum protects against high-fat diet-induced metabolic abnormalities by PPARγ repression, subsequently increasing mitochondrial uncoupling protein 2 expression and AMP/ATP ratio, leading to the activation of AMPK and culminating in enhanced oxidative metabolism in both liver and adipose tissue. Moreover, guar gum markedly increased peripheral glucose clearance, possibly mediated by the SCFA-induced colonic hormone glucagon-like peptide-1. Overall, this study provides novel molecular insights into the beneficial effects of guar gum on the metabolic syndrome and strengthens the potential role of guar gum as a dietary-fiber intervention. PMID:26292284

  9. The effect of different dosages of guar gum on gastric emptying and small intestinal transit of a consumed semisolid meal.

    PubMed

    van Nieuwenhoven, M A; Kovacs, E M; Brummer, R J; Westerterp-Plantenga, M S; Brouns, F

    2001-02-01

    There is no consensus about the effect of guar gum supplementation on gastrointestinal transit. It has been suggested that guar gum slows gastric emptying and intestinal transit, thus inducing an increased feeling of satiety. To investigate whether addition of guar gum to a semisolid meal affects gastrointestinal transit. Eight male subjects were randomly studied four times. They consumed a standard semisolid test meal containing either 0 g, 2.5 g, 3.5 g, or 4.5 g of guar gum. The test meals contained 1 mCi 99mTc-hepatate for scintigraphy and 5 g lactulose for the H2-breath test. Scintigraphic scanning was performed for at least two hours, and gastric half-emptying time (T1/2) was calculated. Breath samples were collected at 15 minute intervals and analyzed for H2-enrichment. The orocecal transit time (OCTT) was then determined. A parameter of intestinal transit (PIT) was obtained by subtracting the T1/2 from the OCTT. There were no significant differences (in minutes) between the different tests in both T1/2 (0 g, t = 88.2 +/- 11, 2.5 g, t = 83.3 +/- 11.9, 3.5 g, t = 83.3 +/- 13.6, 4.5 g, t = 72.4 +/- 7.2, p = 0.86) and PIT (0 g, t = 149.9 +/- 26.6, 2.5 g, t = 145.5 +/- 25.6, t = 3.5 g, t = 175.3 +/- 17.6, t = 4.5 g, t = 152.6 +/- 22.4, p = 0.52). Addition of guar gum to a semisolid meal up to a dosage of 4.5 g does not affect gastrointestinal transit. Other mechanisms than gastrointestinal motility are involved in a possible satiating effect of guar gum supplementation.

  10. Glycaemic and insulin responses of diabetic patients to traditional Malaysian meals and the effect of guar gum.

    PubMed

    Khalid, B A; Lee, L F; Samad, A H; Ng, M L

    1996-12-01

    The aims of the project were to determine the glycaemic and insulin responses of non-insulin dependent diabetic patients (NIDDM) to 3 traditional Malaysian meals compared to oral glucose, and to determine whether guar gum would affect these responses. Patients with NIDDM were tested with 75 g oral glucose and three common breakfast meals of the three main ethnic groups of Malaysia. When compared with the oral glucose group, significantly by lower blood glucose responses were seen at 90 and 120 minutes post prandial for nasi lemak (p<0.05) and at 60, 75 and 90 minutes for mee sup (p<0.05). No significant difference was seen for roti telur. There was no significant difference in plasma glucose at any time point of the study when the three test meals were compared with each other. Addition of 5g granulated guar gum mixed with water taken prior to the glucose significantly lowered the plasma glucose at 60, 120 and 150 minutes postprandially (p<0.05). Similarly for the test meals, guar gum significantly lowered plasma glucose concentration between 15 and 45 minutes (p<0.03) postprandial for nasi lemak and between 15 and 30 minutes (p<0.03) for mee sup but not with roti telur. With addition of guar gum, there was no significant change of insulin responses with the three meals but a significant increase was seen at 30 minutes (p<0.02) after ingestion of glucose.

  11. Graft copolymerization of ethylacrylate onto xanthan gum, using potassium peroxydisulfate as an initiator.

    PubMed

    Pandey, Sadanand; Mishra, Shivani B

    2011-11-01

    Graft copolymer of xanthan gum (XG) and ethylacrylate (EA) has been synthesized by free radical polymerization using potassium peroxydisulfate (KPS) as an initiator in an air atmosphere. The grafting parameters, i.e. grafting ratio and efficiency decrease with increase in concentration of xanthan gum from 0.050 mg/25 mL to 0.350 mg/25 mL, but these grafting parameters increase with increase in concentration of ethylacrylate from 9×10(-2) to 17×10(-2) ML(-1), and KPS from 15×10(-3) to 35×10(-3) ML(-1). The graft copolymer has been characterized by FTIR, XRD, TGA and SEM analysis. The grafted copolymer was also evaluated as efficient Zn(2+) metal binder. The grafted copolymer shows improvement in the stability, solubility as well as their sorbing capacity. Thus graft copolymer formed could find applications in metal ion removal and in drug delivery. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. Effect of charge density of polysaccharides on self-assembled intragastric gelation of whey protein/polysaccharide under simulated gastric conditions.

    PubMed

    Zhang, Sha; Zhang, Zhong; Vardhanabhuti, Bongkosh

    2014-08-01

    This study focuses on the behavior of mixed protein and polysaccharides with different charge densities under simulated gastric conditions. Three types of polysaccharides, namely, guar gum, xanthan gum and carrageenan (neutral, medium negatively, and highly negatively charged, respectively) were selected for heating together with whey protein isolate (WPI) at a biopolymer ratio ranging from 0.01 to 0.1. Upon mixing with simulated gastric fluid (SGF), all WPI-guar gum samples remained soluble, whereas WPI-xanthan gum and WPI-carrageenan at biopolymer ratio higher than 0.01 led to self-assembled intragastric gelation immediately after mixing with SGF. The mechanism behind the intragastric gelation is believed to be the cross-linking between oppositely charged protein and polysaccharides when pH was reduced to below the pI of the protein. Higher biopolymer ratio led to a higher degree of intermolecular interaction, which tends to form stronger gel. More negatively charged carrageenan also formed a stronger gel than xanthan gum. SDS-PAGE results show that the digestibility of protein was not affected by the presence of guar gum as well as xanthan gum and carrageenan at biopolymer ratio lower than 0.02. However, intragastric gel formed by WPI-xanthan gum and WPI-carrageenan at biopolymer ratio higher than 0.02 significantly slows down the digestion rate of protein, which could potentially be used to delay gastric emptying and promote satiety.

  13. Determination of the Degree of Substitution of Cationic Guar Gum by Headspace-Based Gas Chromatography during Its Synthesis.

    PubMed

    Wan, Xiaofang; Guo, Congbao; Feng, Jiarui; Yu, Teng; Chai, Xin-Sheng; Chen, Guangxue; Xie, Wei-Qi

    2017-08-16

    This study reports on a headspace-based gas chromatography (HS-GC) technique for determining the degree of substitution (DS) of cationic guar gum during the synthesis process. The method is based on the determination of 2,3-epoxypropyltrimethylammonium chloride in the process medium. After a modest pretreatment procedure, the sample was added to a headspace vial containing bicarbonate solution for measurement of evolved CO 2 by HS-GC. The results showed that the method had a good precision (relative standard deviation of <3.60%) and accuracy for the 2,3-epoxypropyltrimethylammonium chloride measurement, with recoveries in the range of 96-102%, matching with the data obtained by a reference method, and were within 12% of the values obtained by the more arduous Kjeldahl method for the calculated DS of cationic guar gum. The HS-GC method requires only a small volume of sample and, thus, is suitable for determining the DS of cationic guar gum in laboratory-scale process-related applications.

  14. Effect of guar gum on hunger and satiety after meals of differing fat content: relationship with gastric emptying.

    PubMed

    French, S J; Read, N W

    1994-01-01

    To determine whether the satiating effects of fiber are due to delaying gastric emptying or slowing absorption of meals, 3% guar gum was added to high- and low-fat soups and gastric emptying rate, hunger, and satiety were measured in eight male volunteers. Guar gum delayed the emptying of the low-fat soup but the small delays in the return of hunger and decline of fullness were significantly correlated with the gastric emptying, suggesting mediation by gastric mechanoreceptors. The high-fat soup also emptied more slowly but this had no effect on the return of hunger or the decline in fullness. The delays in the return of hunger and decline of fullness were far greater when guar gum was added to the fatty soup; these delays were not correlated with the small additional delay in gastric emptying. This is more compatible with slowed absorption and prolonged contact of nutrients with intestinal chemoreceptors.

  15. 21 CFR 201.319 - Water-soluble gums, hydrophilic gums, and hydrophilic mucilloids (including, but not limited to...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... gum, kelp, methylcellulose, plantago seed (psyllium), polycarbophil tragacanth, and xanthan gum) as... gum, kelp, methylcellulose, plantago seed (psyllium), polycarbophil tragacanth, and xanthan gum) as..., methylcellulose, plantago seed (psyllium), polycarbophil, tragacanth, and xanthan gum. Esophageal obstruction and...

  16. 21 CFR 201.319 - Water-soluble gums, hydrophilic gums, and hydrophilic mucilloids (including, but not limited to...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... gum, kelp, methylcellulose, plantago seed (psyllium), polycarbophil tragacanth, and xanthan gum) as... gum, kelp, methylcellulose, plantago seed (psyllium), polycarbophil tragacanth, and xanthan gum) as..., methylcellulose, plantago seed (psyllium), polycarbophil, tragacanth, and xanthan gum. Esophageal obstruction and...

  17. Effect of partially hydrolyzed guar gum on pasting, thermo-mechanical and rheological properties of wheat dough.

    PubMed

    Mudgil, Deepak; Barak, Sheweta; Khatkar, B S

    2016-12-01

    Partially hydrolyzed guar gum was prepared using enzymatic hydrolysis of native guar gum that can be utilized as soluble fiber source. The effect of partially hydrolyzed guar gum (PHGG) on pasting, thermo-mechanical and rheological properties of wheat flour was investigated using rapid visco-analyzer, Mixolab and Microdoughlab. Wheat flour was replaced with 1-5g PHGG per 100g of wheat flour on weight basis. PHGG addition decreased the peak, trough, breakdown, setback and final viscosity of wheat flour. Water absorption and amylase activity of wheat dough were increased whereas starch gelatinization and protein weakening of wheat dough were reduced as a result of PHGG addition to wheat flour. PHGG addition also increased the peak dough height, arrival time, dough development time, dough stability and peak energy of wheat dough system. However, dough softening was decreased after PHGG addition to wheat flour dough. Overall, it can be assumed that PHGG has influenced the properties of wheat flour dough system by decreasing the RVA viscosities and increasing the water absorption and starch gelatinization of wheat dough system. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Attenuation of the meal-induced increase in plasma lipids and adipose tissue lipoprotein lipase by guar gum in rats.

    PubMed

    Deshaies, Y; Begin, F; Savoie, L; Vachon, C

    1990-01-01

    This study was designed to evaluate the effect of guar gum on the postprandial increase in plasma lipids, insulin and lipoprotein lipase (LPL) activity in white adipose tissue (WAT). Male rats were given ad libitum access to purified diets containing either no fiber or 5% guar gum for 3 wk. The animals were killed at various times after a meal (10% of daily ad libitum intake of their respective diets). Consumption of guar gum resulted in smaller final body weight (-7%, P less than 0.05) and ad libitum food intake (-10%, P less than 0.05). The difference in epididymal WAT weight induced by the concomitant diet was relatively larger (-29%, P less than 0.05) than that of whole body weight. Although no difference was seen in fasting plasma total and high density lipoprotein cholesterol levels between dietary groups, the postprandial increase in these variables was larger in the animals given the fiber-free meal than in those receiving the fiber-supplemented meal (P less than 0.01). Guar also attenuated the postprandial rise in plasma triacylglycerols. The presence of fiber in the meal reduced the postprandial increase in plasma insulin (P less than 0.01). The meal-induced rise in LPL activity of WAT was significantly smaller (P less than 0.02) in the animals fed the diet containing fiber than in those receiving the fiber-free diet. Thus, guar gum altered the activity of LPL in WAT, an effect that may be related to the insulin response to this dietary component.(ABSTRACT TRUNCATED AT 250 WORDS)

  19. Optimization of corn, rice and buckwheat formulations for gluten-free wafer production.

    PubMed

    Dogan, Ismail Sait; Yildiz, Onder; Meral, Raciye

    2016-07-01

    Gluten-free baked products for celiac sufferers are essential for healthy living. Cereals having gluten such as wheat and rye must be removed from the diet for the clinical and histological improvement. The variety of gluten-free foods should be offered for the sufferers. In the study, gluten-free wafer formulas were optimized using corn, rice and buckwheat flours, xanthan and guar gum blend as an alternative product for celiac sufferers. Wafer sheet attributes and textural properties were investigated. Considering all wafer sheet properties in gluten-free formulas, better results were obtained by using 163.5% water, 0.5% guar and 0.1% xanthan in corn formula; 173.3% water, 0.45% guar and 0.15% xanthan gum in rice formula; 176% water, 0.1% guar and 0.5% xanthan gum in buckwheat formula. Average desirability values in gluten-free formulas were between 0.86 and 0.91 indicating they had similar visual and textural profiles to control sheet made with wheat flour. © The Author(s) 2015.

  20. Rate and yield relationships in the production of xanthan gum by batch fermentations using complex and chemically defined growth media

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pinches, A.; Pallent, L.J.

    1986-10-01

    Rate and yield information relating to biomass and product formation and to nitrogen, glucose and oxygen consumption are described for xanthan gum batch fermentations in which both chemically defined (glutamate nitrogen) and complex (peptone nitrogen) media are employed. Simple growth and product models are used for data interpretation. For both nitrogen sources, rate and yield parameter estimates are shown to be independent of initial nitrogen concentrations. For stationary phases, specific rates of gum production are shown to be independent of nitrogen source but dependent on initial nitrogen concentration. The latter is modeled empirically and suggests caution in applying simple productmore » models to xanthan gum fermentations. 13 references.« less

  1. Effect of a modified guar gum preparation on glucose and lipid levels in diabetics and healthy volunteers.

    PubMed

    Smith, U; Holm, G

    1982-10-01

    Six healthy volunteers and 17 diabetics (6 insulin-dependent and 11 diet- and tablet-treated) were treated with a special processed, palatable guar gum (10 g b.i.d. immediately before meals) for periods of one or three weeks or, in some cases, up to 13 weeks. A standardized test meal was given to study the effect of the fiber on postprandial glucose levels. Ten g guar was stirred in water and taken immediately before the test meal. The postprandial blood glucose levels were similar in the healthy volunteers but significantly lower in the diabetics following treatment with guar for one and three weeks, respectively. Furthermore, the fasting blood glucose levels were significantly lower in the diabetics after three, but not one, weeks of treatment. The lower postprandial glucose levels were coupled with attenuated and delayed insulin levels in accordance with an effect of guar gum on the rate of carbohydrate absorption. The cholesterol levels were on average reduced with 14% in the diabetics following three weeks' treatment with guar. The higher the initial cholesterol level, the greater the reduction in cholesterol; 26% reduction was achieved in four patients with initial levels above 7 mM. The alpha-lipoprotein cholesterol levels were not significantly changed, thus an increase in the alpha-lipoprotein cholesterol/total serum cholesterol ratio was obtained. Neither plasma triglycerides nor body weights altered during treatment. The reported side-effects were as expected and were usually mild and transient (e.g. increased flatulence). The data show that guar gum also reduces postprandial glucose levels on a long-term basis and may improve the diabetic control. Additionally, treatment with this fiber leads to a concentration-dependent decrease in cholesterol levels.

  2. Blood glucose and serum insulin responses to breakfast including guar gum and cooked or uncooked milk in type 2 (non-insulin-dependent) diabetic patients.

    PubMed

    Uusitupa, M; Aro, A; Korhonen, T; Tuunainen, A; Sarlund, H; Penttilä, I

    1984-06-01

    The post-prandial blood glucose and serum insulin responses to test meals, each including 300 ml fat-free milk taken separately with the meal or premixed before cooking into the meal consisting of oatmeal porridge, were studied in 10 diet-treated Type 2 (non-insulin-dependent) diabetic subjects. The modifying effect of guar gum on the responses was also studied by supplementing both types of test meals with 5 g granulated guar gum taken at the beginning of the meal. The blood glucose response was higher after the meal which contained cooked milk than after the respective meal with milk taken separately. The guar gum supplementation attenuated the blood glucose response after the meals, but the effect was more pronounced after the meal containing cooked milk. Post-prandial serum insulin responses were similar after all test meals. The results suggest that cooking may facilitate the absorption of lactose from milk-containing foods, and that supplementation with guar gum may counteract this response.

  3. Sonication-Based Improvement of the Physicochemical Properties of Guar Gum as a Potential Substrate for Modified Drug Delivery Systems

    PubMed Central

    Ansari, Siddique Akber; Cencetti, Claudia; Carafa, Maria; Mazzuca, Claudia; Capitani, Donatella; Coviello, Tommasina

    2013-01-01

    Guar Gum is a natural polysaccharide that, due to its physicochemical properties, is extensively investigated for biomedical applications as a matrix for modified drug delivery, but it is also used in the food industry as well as in cosmetics. A commercial sample of Guar Gum was sonicated for different periods of time, and the reduction in the average molecular weight was monitored by means of viscometric measurements. At the same time, the rheological behaviour was also followed, in terms of viscoelasticity range, flow curves, and mechanical spectra. Sonicated samples were used for the preparation of gels in the presence of borate ions. The effect of borax on the new samples was investigated by recording mechanical spectra, flow curves, and visible absorption spectra of complexes with Congo Red. The anisotropic elongation, observed in previous studies with tablets of Guar Gum and borax, was remarkably reduced when the sonicated samples were used for the preparation of the gels. PMID:23984426

  4. The Use of Xanthan Gum as Vaccine Adjuvant: An Evaluation of Immunostimulatory Potential in BALB/c Mice and Cytotoxicity In Vitro

    PubMed Central

    Oliveira, Thaís Larré; Collares, Thaís Farias; Monte, Leonardo Garcia; Inda, Guilherme Roig; Moreira, Angelita da Silveira

    2017-01-01

    The successful production of new, safe, and effective vaccines that generate immunological memory is directly related to adjuvant feature, which is responsible for increasing and/or modulating the immune response. Several compounds display adjuvant activity, including carbohydrates. These compounds play important roles in the immune response, as well as having biocompatible properties in vaccine formulations. One such carbohydrate is xanthan gum, a polysaccharide that is produced by the plant-pathogenic bacterium Xanthomonas spp., which has adjuvant attributes. This study evaluated the immune response induced by xanthan gum associated with ovalbumin in BALB/c mice, which were subcutaneously immunized, in terms of antibody production (IgG1, IgG2a, IgG2b, and IgG3), and assessed the levels of IFN-γ in the splenocyte culture using indirect ELISA. Furthermore, we investigated in vitro cytotoxicity of xanthan in the embryo fibroblasts cell line of the NIH/3T3 mouse by MTT assay and propidium iodide uptake assay. The mice immunized with ovalbumin plus xanthan gum exhibited higher antibody IgG1 responses than control groups. Furthermore, the xanthan polysaccharide was capable of increasing the immunogenicity of antigens by producing IFN-γ and did not exhibit cytotoxicity effects in NIH/3T3 mouse fibroblast cells, considered a promising candidate for vaccine adjuvant. PMID:28555192

  5. Numerical simulation of a bubble rising in an environment consisting of Xanthan gum

    NASA Astrophysics Data System (ADS)

    Aguirre, Víctor A.; Castillo, Byron A.; Narvaez, Christian P.

    2017-09-01

    An improved numerical algorithm for front tracking method is developed to simulate a bubble rising in viscous liquid. In the new numerical algorithm, volume correction is introduced to conserve the bubble volume while tracking the bubble's rising and deforming. Volume flux conservation is adopted to solve the Navier-Stokes equation for fluid flow using finite volume method. Non-Newtonian fluids are widely used in industry such as feed and energy industries. In this research we used Xanthan gum which is a microbiological polysaccharide. In order to obtain the properties of the Xanthan gum, such as viscosity, storage and loss modulus, shear rate, etc., it was necessary to do an amplitude sweep and steady flow test in a rheometer with a concentric cylinder as geometry. Based on the data given and using a numerical regression, the coefficients required by Giesekus model are obtained. With these coefficients, it is possible to simulate the comportment of the fluid by the use of the developed algorithm. Once the data given by OpenFOAM is acquired, it is compared with the experimental data.

  6. 77 FR 39210 - Xanthan Gum From Austria and the People's Republic of China: Initiation of Antidumping Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-02

    ...\\ According to Petitioner, lysine and MSG are both produced via fermentation, use similar production equipment..., sugars, minerals, and salts. Xanthan gum is a polysaccharide produced by aerobic fermentation of...

  7. The effect of prolonged dietary supplementation with guar gum on subsequent iron absorption and retention in rats.

    PubMed

    Swindell, T E; Johnson, I T

    1987-03-01

    The effect of prolonged consumption of guar gum on iron absorption and Fe status was investigated in rats. Experiments with closed loops of duodenum, isolated in situ, were designed to reveal changes in the short-term regulation of duodenal Fe uptake, induced by challenge with low- and high-Fe meals. In separate experiments, the effect of guar gum on the capacity of intact rats to maintain Fe status and to absorb Fe from a test-meal was investigated. Male Wistar rats were given either a control, semi-synthetic diet (C) for 21 d or a similar diet containing 100 g guar gum (G)/kg for 27 d. Both diets contained 36 mg Fe/kg. Two subgroups were then challenged with meals containing low-Fe (8 mg/kg) or high-Fe (566 mg/kg), while a third subgroup received a meal of the control diet (36 mg Fe/kg). At intervals of 12, 36, 60 and 84 h after the dietary challenge, the uptake of [59Fe]ferric citrate was measured using closed duodenal loops in situ. All G-supplemented animals absorbed less Fe than their C-fed counterparts. Within group C, animals given the high-Fe challenge had lower absorptions 12, 36 and 60 h later, compared with those given the maintenance diet, whilst those given the low-Fe meal showed much increased uptake 12 and 36 h later. The latter effect was virtually abolished by guar gum. In the second experiment, male Wistar rats were fed on the C or G diets containing 8, 15, 20, 26 or 36 mg Fe/kg for approximately 10 weeks ad lib.(ABSTRACT TRUNCATED AT 250 WORDS)

  8. Effect of salt on turbulent drag reduction of xanthan gum.

    PubMed

    Hong, Cheng Hai; Choi, Hyoung Jin; Zhang, Ke; Renou, Frederic; Grisel, Michel

    2015-05-05

    The turbulent flow of an aqueous KCl solution driven by a rotating disc in a closed chamber showed significant drag reduction (DR) when a small amount of xanthan gum (XG) was added. The effects of the experimental parameters (XG and KCl concentrations, and time) on the drag reduction efficiency were examined. While the DR efficiency of XG decreased with increasing salt (KCl) concentration, the time-dependent DR efficiency was found to be fitted well using Brostow model equation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Sensory and rheological characteristics of thickened liquids differing concentrations of a xanthan gum-based thickener.

    PubMed

    Kim, Hyeri; Hwang, Han-Im; Song, Ki-Won; Lee, Jeehyun

    2017-12-01

    The objectives of this study were to develop and compare sensory characteristics of beverages and soups thickened with different concentrations of a xanthan gum-based thickener, and to examine, using rheological measurement, whether the viscosity of the thickened liquids conformed to the recommendations of the National Dysphagia Diet (NDD) Task Force. Beverages tested included water, apple juice, orange juice, soymilk, and Yakult. The thickening agent was added to samples at concentrations of 1, 2, or 3%. Addition of the thickening agent had a significant effect on the appearance, texture, and starchy flavor, which were evaluated by descriptive sensory evaluation. The reference standards of viscosity used in sensory descriptive analysis could be useful to practitioners who have to make dysphagia diets and need to learn to make them properly. In rheological measurement, viscosity of thickened liquids in stationary state would be perceived as higher compared to that while swallowing, because of the shear thinning property. This could lead to noncompliance of the medical advice or malnutrition. It is necessary to determine optimal proportion of xanthan gum-based thickener or uncover alternatives, which have shear thinning properties lower than those of xanthan gum, for the acceptance of dysphagia patients. There was no pudding-like viscosity as classified by NDD, when prepared following instructions. Future studies should include higher concentrations of thickener to find out the concentration of the thickener resulting in pudding-like viscosity as recommended by NDD. When a manufacturer modifies or develops a xanthan gum-based thickener, findings from this study can be utilized to understand sensory and rheological characteristics of thickened liquid. For practitioners who have to make dysphagia diets, the reference standards of viscosity used in sensory descriptive analysis could be helpful for deciding the viscosity level of thickened liquids based only on visual

  10. Application of guar gum biopolymer in the prescription of tablets with sodium ibuprofen--quality tests and pharmaceutical availability in vitro.

    PubMed

    Berner-Strzelczyk, Aneta; Kołodziejska, Justyna; Zgoda, Marian Mikołaj

    2006-01-01

    The increasing interest of the technology of drug form in natural biopolymers has become the reason for undertaking investigations on the possibility of guar gum application in the prescription of oral solid form of a drug. Alternative compositions and technology of the production of tablets of regulated in time sodium ibuprofen release were worked out for children. Two series of tablets were prepared with guar gum (5 and 10% content) and a series without the biopolymer. The tablet mass in each case contained keryostatic sorbitol and bioadhesive polyvinylpyrrolidone. All tablets were tested as regards the quality of production, compliance with the requirements of Polish Pharmacopoeia VI and potential therapeutic usefulness, manifestation of which is pharmaceutical availability of the therapeutic agent (sodium ibuprofen). The tests demonstrated that the produced tablets with sodium ibuprofen have proper physicochemical properties, in compliance with Polish Pharmacopoeia VI requirements. Application of biopolymer of guar gum type as adjuvant substance contributes to the improvement of the tablet hardness parameters and prevents technological problems (lining mixture of powders to tableting machine punch). The designed tablets demonstrate proper pharmaceutical availability of over 80%. Introduction of guar gum into their prescription prolonged their disintegration time and the rate of sodium ibuprofen release, which predisposes the produced form of a drug to have the function of a tablet with slowed-down release.

  11. 77 FR 34997 - Xanthan Gum From Austria and China; Institution of Antidumping Duty Investigations and Scheduling...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-12

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-1202-1203 (Preliminary)] Xanthan Gum... Phase Investigations AGENCY: United States International Trade Commission. ACTION: Notice. SUMMARY: The... Investigations, U.S. International Trade Commission, 500 E Street SW., Washington, DC 20436. Hearing-impaired...

  12. Field assessment of guar gum stabilized microscale zerovalent iron particles for in-situ remediation of 1,1,1-trichloroethane

    NASA Astrophysics Data System (ADS)

    Velimirovic, Milica; Tosco, Tiziana; Uyttebroek, Maarten; Luna, Michela; Gastone, Francesca; De Boer, Cjestmir; Klaas, Norbert; Sapion, Hans; Eisenmann, Heinrich; Larsson, Per-Olof; Braun, Juergen; Sethi, Rajandrea; Bastiaens, Leen

    2014-08-01

    A pilot injection test with guar gum stabilized microscale zerovalent iron (mZVI) particles was performed at test site V (Belgium) where different chlorinated aliphatic hydrocarbons (CAHs) were present as pollutants in the subsurface. One hundred kilograms of 56 μm-diameter mZVI (~ 70 g L- 1) was suspended in 1.5 m3 of guar gum (~ 7 g L- 1) solution and injected into the test area. In order to deliver the guar gum stabilized mZVI slurry, one direct push bottom-up injection (Geoprobe) was performed with injections at 5 depths between 10.5 and 8.5 m bgs. The direct push technique was preferred above others (e.g. injection at low flow rate via screened wells) because of the limited hydraulic conductivity of the aquifer, and to the large size of the mZVI particles. A final heterogeneous distribution of the mZVI in the porous medium was observed explicable by preferential flow paths created during the high pressure injection. The maximum observed delivery distance was 2.5 m. A significant decrease in 1,1,1-TCA concentrations was observed in close vicinity of spots where the highest concentration of mZVI was observed. Carbon stable isotope analysis (CSIA) yielded information on the success of the abiotic degradation of 1,1,1-TCA and indicated a heterogeneous spatio-temporal pattern of degradation. Finally, the obtained results show that mZVI slurries stabilized by guar gum can be prepared at pilot scale and directly injected into low permeable aquifers, indicating a significant removal of 1,1,1-TCA.

  13. Long term ingestion of a preload containing fructo-oligosaccharide or guar gum decreases fat mass but not food intake in mice.

    PubMed

    Hadri, Zouheyr; Chaumontet, Catherine; Fromentin, Gilles; Even, Patrick C; Darcel, Nicolas; Bouras, Abdelkader Dilmi; Tomé, Daniel; Rasoamanana, Rojo

    2015-08-01

    Fermentable dietary fibre such as fructo-oligosaccharide and viscous dietary fibers such as guar gum and alginate affect energy homeostasis. The goal of this study was to compare the impact of long term intake of these three dietary fibers on food intake, meal pattern, body weight and fat accumulation in mice. Over a period of 3weeks, the mice were fed daily with a preload containing 32mg of fructo-oligosaccharide or alginate or 13mg of guar gum. Food intake and body weight were monitored weekly, while meal patterns, adiposity and the expression of hypothalamic neuropeptide genes were evaluated at the end of the study period. The 3 dietary fibers produced a similar decrease in total daily food intake (14 to 22%) at the end of the first week, and this effect disappeared over time. The 3 dietary fibers induced a slight variation in satiation parameters. Body weight and expression of hypothalamic neuropeptide genes were not affected by any of the treatment. Preload of fructo-oligosaccharide and guar gum induced a similar and substantial decrease in the development of adiposity (17% and 14%, respectively), while alginate had no effect. Our results demonstrate mainly that the inhibitory effect of dietary fiber on food intake is lost over time, and that guar gum limits fat storage. Copyright © 2015. Published by Elsevier Inc.

  14. 21 CFR 201.319 - Water-soluble gums, hydrophilic gums, and hydrophilic mucilloids (including, but not limited to...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., carboxymethylcellulose sodium, carrageenan, chondrus, glucomannan ((B-1,4 linked) polymannose acetate), guar gum, karaya..., carboxymethylcellulose sodium, carrageenan, chondrus, glucomannan ((B-1,4 linked) polymannose acetate), guar gum, karaya..., carrageenan, chondrus, glucomannan ((B-1,4 linked) polymannose acetate), guar gum, karaya gum, kelp...

  15. Gelation and thermal characteristics of microwave extracted fish gelatin-natural gum composite gels.

    PubMed

    Binsi, P K; Nayak, Natasha; Sarkar, P C; Joshy, C G; Ninan, George; Ravishankar, C N

    2017-02-01

    In this study, the gelation and thermal characteristics of microwave extracted fish scale gelatin blended with natural gums such as gum arabic (AG), xanthan gum (XG), guar gum (GG), and tragacanth gum (TG) was evaluated. The nature of interaction and behavior of gelatin in presence of various gums was confirmed by particle size analysis, viscosity profile, FT-IR analysis and turbidity measurements. DSC data revealed that addition of AG, TG and GG remarkably improved the thermal stability of fish gelatin gel. The composite gels of TG, AG, and XG exhibited higher hardness and bloom strength values as compared to pure fish gelatin implying its textural synergy. Based on qualitative descriptive analysis, TG was found to be superior in improving the stability of fish gelatin gel, closely followed by AG. The results suggest that addition of these gums can reduce syneresis and retard melting of gelatin gels at ambient temperature, which are otherwise soft and thermally unstable.

  16. 77 FR 65361 - Xanthan Gum From Austria and the People's Republic of China: Postponement of Preliminary...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-26

    ... Austria and the People's Republic of China: Postponement of Preliminary Determinations of Antidumping Duty...: October 26, 2012. FOR FURTHER INFORMATION CONTACT: Karine Gziryan (Austria) or Brandon Farlander (People's... of initiation of antidumping duty investigations of xanthan gum from Austria and the People's...

  17. High Temperature Stable Separator for Lithium Batteries Based on SiO2 and Hydroxypropyl Guar Gum

    PubMed Central

    Carvalho, Diogo Vieira; Loeffler, Nicholas; Kim, Guk-Tae; Passerini, Stefano

    2015-01-01

    A novel membrane based on silicon dioxide (SiO2) and hydroxypropyl guar gum (HPG) as binder is presented and tested as a separator for lithium-ion batteries. The separator is made with renewable and low cost materials and an environmentally friendly manufacturing processing using only water as solvent. The separator offers superior wettability and high electrolyte uptake due to the optimized porosity and the good affinity of SiO2 and guar gum microstructure towards organic liquid electrolytes. Additionally, the separator shows high thermal stability and no dimensional-shrinkage at high temperatures due to the use of the ceramic filler and the thermally stable natural polymer. The electrochemical tests show the good electrochemical stability of the separator in a wide range of potential, as well as its outstanding cycle performance. PMID:26512701

  18. Field assessment of guar gum stabilized microscale zerovalent iron particles for in-situ remediation of 1,1,1-trichloroethane.

    PubMed

    Velimirovic, Milica; Tosco, Tiziana; Uyttebroek, Maarten; Luna, Michela; Gastone, Francesca; De Boer, Cjestmir; Klaas, Norbert; Sapion, Hans; Eisenmann, Heinrich; Larsson, Per-Olof; Braun, Juergen; Sethi, Rajandrea; Bastiaens, Leen

    2014-08-01

    A pilot injection test with guar gum stabilized microscale zerovalent iron (mZVI) particles was performed at test site V (Belgium) where different chlorinated aliphatic hydrocarbons (CAHs) were present as pollutants in the subsurface. One hundred kilograms of 56μm-diameter mZVI (~70gL(-1)) was suspended in 1.5m(3) of guar gum (~7gL(-1)) solution and injected into the test area. In order to deliver the guar gum stabilized mZVI slurry, one direct push bottom-up injection (Geoprobe) was performed with injections at 5 depths between 10.5 and 8.5m bgs. The direct push technique was preferred above others (e.g. injection at low flow rate via screened wells) because of the limited hydraulic conductivity of the aquifer, and to the large size of the mZVI particles. A final heterogeneous distribution of the mZVI in the porous medium was observed explicable by preferential flow paths created during the high pressure injection. The maximum observed delivery distance was 2.5m. A significant decrease in 1,1,1-TCA concentrations was observed in close vicinity of spots where the highest concentration of mZVI was observed. Carbon stable isotope analysis (CSIA) yielded information on the success of the abiotic degradation of 1,1,1-TCA and indicated a heterogeneous spatio-temporal pattern of degradation. Finally, the obtained results show that mZVI slurries stabilized by guar gum can be prepared at pilot scale and directly injected into low permeable aquifers, indicating a significant removal of 1,1,1-TCA. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Preparation and Characterization of Guar-Montmorillonite Nanocomposites

    PubMed Central

    Mansa, Rola; Detellier, Christian

    2013-01-01

    Polymer-clay nanocomposites are highly sought-after materials, mainly due to their applicability in a variety of avenues. From the standpoint of the preparation of these nanocomposites, however, organic compatibility with clay and adherence to “green chemistry” concepts and principles can be limiting factors. As such, the objective was to prepare a biopolymer-modified clay nanocomposite using a simple and environmentally friendly method of preparation, whereby pre-treatment of the clay for organic compatibility was bypassed. Novel montmorillonite nanocomposites were prepared using neutral guar gum and cationic guar gum. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the formation of intercalated structures. A monolayer configuration of cationic guar within the interlayer space was indicated by XRD results, while treatment with neutral guar gum resulted in the observance of both monolayer and bilayer configurations. Additionally, TEM results indicated partial exfoliation. Results attributed from 13C cross polarization/magic angle spinning nuclear magnetic resonance spectroscopy (CP/MAS NMR) of the nanocomposites indicated peaks corresponding to the guar constituent, confirming the adsorption of the biopolymer. Inductively coupled plasma emission spectrometry (ICP-ES) results indicated the exchange of cations present in neutral guar gum with the sodium cations of montmorillonite, in the case of the neutral guar nanocomposites. PMID:28788384

  20. Temperature dependency of the interaction between xanthan gum and sage seed gum: An interpretation of dynamic rheology and thixotropy based on creep test.

    PubMed

    Razavi, Seyed M A; Behrouzian, Fataneh; Alghooneh, Ali

    2017-10-01

    The viscoelastic (transient and dynamic) and time-dependent rheological behaviors of XG (xanthan gum), SSG (sage seed gum) and their blends at various ratios (1-3, 1-1, and 3-1 SSG-XG) and temperatures (10, 30, and 50C) were investigated using creep and recovery analyses. The creep compliance was converted to stress relaxation data; then, the structural kinetic model satisfactorily fitted the time-dependent relaxation modulus. Furthermore, dynamic rheology of mixtures was investigated using creep analyses. The most important contribution of the Maxwell spring to deformation (53.51%), was that corresponding to the SSG at 50C and the most important contribution of the Maxwell dashpot to the maximum deformation, were those corresponding to the XG (61.44%) and 1-3 SSG-XG (58.91%) samples both at 50C. The breakdown rate constant ( α) of the crosslinked gum structure in SSG and 3-1 SSG-XG under the application of external shear stress increases with temperature from 10 to 50C in the range of 0.14-0.32 (1/s) and 0.14-0.24 (1/s), respectively, whereas other dispersions showed the reverse trend. Among all dispersions, only XG and 1-3 SSG-XG demonstrated crossover frequency at 9.95 and 31.47 rad/s, respectively, at 50C, indicative of the lowest entanglement density for 1-3 SSG-XG. The greatest interaction between SSG and XG occurred for 3-1 ratio at 50C, which was confirmed by the Han curves. Hydrocolloid blends, particularly those consisting of xanthan gum and a galactomannan from new source can provide a range of attractive textural properties. Rheological studies contribute to the description of the molecular structure and prediction of the structural changes during their manufacturing processes. Sage seed gum (SSG), as a polyelectrolyte galactomannan, has a great potential to exert stabilizing, thickening, gelling and binding properties in food, cosmetics, and pharmaceutical systems. Therefore, we elaborate the interactions between SSG and xanthan gum and also the

  1. Texture profile analysis of yogurt as influenced by partially hydrolyzed guar gum and process variables.

    PubMed

    Mudgil, Deepak; Barak, Sheweta; Khatkar, B S

    2017-11-01

    Effect of partially hydrolyzed guar gum (PHGG) level (1-5%), culture level (1.5-3.5%) and incubation time (4-8 h) on texture profile of yogurt was studied using response surface methodology. The fortification of partially hydrolyzed guar gum in yogurt decreased the firmness and gumminess while it increased the adhesiveness, cohesiveness and springiness of yogurt significantly at p  < 0.01. The culture level did not affect the textural properties of yogurt significantly except gumminess whereas textural properties of yogurt were negatively correlated with incubation time. The coefficient of determination for hardness/hardness, adhesiveness, cohesiveness, springiness and gumminess were 0.9216, 0.9397, 0.8914, 0.8971 and 0.9156, respectively, which revealed that the models obtained were significant as coefficient of determination value was close to one. The optimum conditions obtained were PHGG level 3.37%, culture level 1.96% and incubation time 5.96 h which leads to preparation of yogurt with desired textural characteristics.

  2. 78 FR 32152 - Guar Hydroxypropyltrimethylammo-nium Chloride; Exemption From the Requirement of a Tolerance

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-29

    ... studies with guar gum in mice, rats, and hamsters did not indicate that guar gum is a teratogen, up to... gum in mice, rats, and hamsters did not indicate that guar gum is a teratogen, up to levels of 800 mg...

  3. Formulation and characterization of bread using coconut-pulp flour and wheat flour composite with addition of xanthan-gum

    NASA Astrophysics Data System (ADS)

    Erminawati; Sidik, W.; Listanti, R.; Zulfakar, H.

    2018-01-01

    Coconut-pulp flour is coconut flour made from by-product of coconut-milk based food products. The flour contains no gluten and high fibre, which can be considered as functional potential food. Bread made from composite-flour of coconut-pulp flour and wheat flour was studied for its physic-chemical and sensory characteristics. Addition of hydrocolloid, like xanthan-gum, was aimed to provide viscoelasticity for the dough which is essential for baked product. Composite-flour proportion used in this study was; 10CPF/90WF, 15CPF/85WF and 20CPF/80WF; and xanthan gum to total flour of 0,1% and 0,4%. Variable observed were; crumb-texture, crumb-colour, taste of coconut, preference and flavour; moisture, ash, fiber and soluble-protein contents. The research showed that addition of coconut-pulp flour in the composite-flour decreased specific volume value and increased the bread texture produced. It also increased the bread moisture-content, ash-content, fibre-content and soluble protein-content. Moreover, the xanthan-gum addition resulted in decreased specific-volume value and increased texture and fiber-content of the bread produced. Overall, the sensory characteristic of crumb colour, flavour and panellist preference revealed better than control bread made from wheat flour, however its crumb texture harder compare to control bread made from wheat flour. This study showed that coconut-pulp flour potential to be developed for production of functional food.

  4. 78 FR 33354 - Xanthan Gum From Austria: Final Determination of Sales at Less Than Fair Value

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-04

    ..., sugars, minerals, and salts. Xanthan gum is a polysaccharide produced by aerobic fermentation of... backbone of two P-1,4-D- Glucose monosaccharide units, the second with a trisaccharide side chain consisting of P-D-Mannose-(1,4)-P-DGlucuronic acid-(1,2)-a-D- Mannose monosaccharide units. The terminal...

  5. 78 FR 43143 - Xanthan Gum From the People's Republic of China: Amended Final Determination of Sales at Less...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-19

    ..., and salts. Xanthan gum is a polysaccharide produced by aerobic fermentation of Xanthomonas campestris... Biotechnologies Fufeng Biotechnologies Co., Co., Ltd. (aka Ltd.)/Shandong Fufeng Inner Mongolia Fermentation Co., Ltd. Fufeng Biotechnologies Co., Ltd.)/ Shandong Fufeng Fermentation Co., Ltd. Deosen Biochemical Ltd...

  6. QbD based synthesis and characterization of polyacrylamide grafted corn fibre gum.

    PubMed

    Singh, Akashdeep; Mangla, Bhumika; Sethi, Sheshank; Kamboj, Sunil; Sharma, Radhika; Rana, Vikas

    2017-01-20

    The aim of present investigation was to utilize quality by design approach for the synthesis of polyacrylamide corn fibre gum (PAAm-g-CFG) from corn fibre gum (CFG) by varying concentration of acrylamide and initiator. The spectral analysis (ATR-FTIR, 1 H NMR, DSC, X-ray and Mass spectroscopy) was conducted to assure grafting copolymerization of CFG with acrylamide. The powder flow properties confirm the porous nature of PAAm-g-CFG. The grafted copolymer dispersion showed shear thinning behaviour that follows Herschel Bulkley model. The viscoelastic analysis suggested viscous liquid like nature of PAAm-g-CFG and its viscosity increases with increase in concentration of PAAm-g-CFG. The mucoadhesive strength of synthesized PAAm-g-CFG was found to be higher than moringa oleifera gum, karaya gum, guar gum, xanthan gum, chitosan and gelatin. Further, the results pointed toward enhanced thermal stability of PAAm-g-CFG. Thus, PAAm-g-CFG has a great potential to be used in food and pharmaceutical industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Application of design of experiment for polyox and xanthan gum coated floating pulsatile delivery of sumatriptan succinate in migraine treatment.

    PubMed

    Jagdale, Swati C; Pawar, Chandrakala R

    2014-01-01

    Migraine follows circadian rhythm in which headache is more painful at the awakening time. This needs administration of dosage form at night time to release drug after lag period when pain gets worse. Sumatriptan succinate is a drug of choice for migraine. Sumatriptan succinate has bitter taste, low oral bioavailability, and shorter half-life. Present work deals with application of design of experiment for polyox and xanthan gum in development of press coated floating pulsatile tablet. Floating pulsatile concept was applied to increase gastric residence of the dosage form. Burst release was achieved through immediate release tablet using crospovidone as superdisintegrant (10%). Pulse lag time was achieved using swellable polymer polyox WSR 205 and xanthan gum. 3(2) experimental design was applied. Optimized formulation was evaluated for physical characteristics and in-vitro and in-vivo study. From results, it can be concluded that optimized batch F8 containing polyox WSR205 (72.72%) and xanthan gum (27.27%) of total weight of polymer has shown floating lag time of 55 ± 2 sec, drug content of 100.35 ± 0.4%, hardness of 6 ± 0.1 Kg/cm(2), and 98.69 ± 2% drug release in pulse manner with lag time of 7 ± 0.1 h. Optimized batch showed prolong gastric residence which was confirmed by in-vivo X-ray study.

  8. Application of Design of Experiment for Polyox and Xanthan Gum Coated Floating Pulsatile Delivery of Sumatriptan Succinate in Migraine Treatment

    PubMed Central

    Jagdale, Swati C.; Pawar, Chandrakala R.

    2014-01-01

    Migraine follows circadian rhythm in which headache is more painful at the awakening time. This needs administration of dosage form at night time to release drug after lag period when pain gets worse. Sumatriptan succinate is a drug of choice for migraine. Sumatriptan succinate has bitter taste, low oral bioavailability, and shorter half-life. Present work deals with application of design of experiment for polyox and xanthan gum in development of press coated floating pulsatile tablet. Floating pulsatile concept was applied to increase gastric residence of the dosage form. Burst release was achieved through immediate release tablet using crospovidone as superdisintegrant (10%). Pulse lag time was achieved using swellable polymer polyox WSR 205 and xanthan gum. 32 experimental design was applied. Optimized formulation was evaluated for physical characteristics and in-vitro and in-vivo study. From results, it can be concluded that optimized batch F8 containing polyox WSR205 (72.72%) and xanthan gum (27.27%) of total weight of polymer has shown floating lag time of 55 ± 2 sec, drug content of 100.35 ± 0.4%, hardness of 6 ± 0.1 Kg/cm2, and 98.69 ± 2% drug release in pulse manner with lag time of 7 ± 0.1 h. Optimized batch showed prolong gastric residence which was confirmed by in-vivo X-ray study. PMID:25530963

  9. Guar gum as biosourced building block to generate highly conductive and elastic ionogels with poly(ionic liquid) and ionic liquid.

    PubMed

    Zhang, Biao; Sudre, Guillaume; Quintard, Guilhem; Serghei, Anatoli; David, Laurent; Bernard, Julien; Fleury, Etienne; Charlot, Aurélia

    2017-02-10

    In this study, we report on the simple and straightforward preparation of ionogels arising from the addition of guar gum (a plant-based polysaccharide) in a solution of precisely-defined poly(ionic liquid) chains (PIL) in imidazolium-based ionic liquid (IL). The development of intermolecular polar interactions (mainly hydrogen bonds) and topologic chain entanglements induces the formation of physical biohybrid ionogels, whose elastic properties can be easily tuned by varying the composition (up to 30000Pa). The combined presence of guar gum and PIL confers excellent dimensional stability to the ionogels with no IL exudation combined with high thermal properties (up to 310°C). The resulting materials are shown to exhibit gel scattering profiles and high conductivities (> 10 -4 S/cm at 30°C). The benefit linked to the formation of guar/PIL associations in IL medium enables to find a good compromise between the mechanical cohesion and the mobility ensuring the ionic transport. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. The Short-Chain Fatty Acid Uptake Fluxes by Mice on a Guar Gum Supplemented Diet Associate with Amelioration of Major Biomarkers of the Metabolic Syndrome

    PubMed Central

    den Besten, Gijs; Havinga, Rick; Bleeker, Aycha; Rao, Shodhan; Gerding, Albert; van Eunen, Karen; Groen, Albert K.; Reijngoud, Dirk-Jan; Bakker, Barbara M.

    2014-01-01

    Studies with dietary supplementation of various types of fibers have shown beneficial effects on symptoms of the metabolic syndrome. Short-chain fatty acids (SCFAs), the main products of intestinal bacterial fermentation of dietary fiber, have been suggested to play a key role. Whether the concentration of SCFAs or their metabolism drives these beneficial effects is not yet clear. In this study we investigated the SCFA concentrations and in vivo host uptake fluxes in the absence or presence of the dietary fiber guar gum. C57Bl/6J mice were fed a high-fat diet supplemented with 0%, 5%, 7.5% or 10% of the fiber guar gum. To determine the effect on SCFA metabolism, 13C-labeled acetate, propionate or butyrate were infused into the cecum of mice for 6 h and the isotopic enrichment of cecal SCFAs was measured. The in vivo production, uptake and bacterial interconversion of acetate, propionate and butyrate were calculated by combining the data from the three infusion experiments in a single steady-state isotope model. Guar gum treatment decreased markers of the metabolic syndrome (body weight, adipose weight, triglycerides, glucose and insulin levels and HOMA-IR) in a dose-dependent manner. In addition, hepatic mRNA expression of genes involved in gluconeogenesis and fatty acid synthesis decreased dose-dependently by guar gum treatment. Cecal SCFA concentrations were increased compared to the control group, but no differences were observed between the different guar gum doses. Thus, no significant correlation was found between cecal SCFA concentrations and metabolic markers. In contrast, in vivo SCFA uptake fluxes by the host correlated linearly with metabolic markers. We argue that in vivo SCFA fluxes, and not concentrations, govern the protection from the metabolic syndrome by dietary fibers. PMID:25203112

  11. 78 FR 2251 - Xanthan Gum From Austria: Preliminary Determination of Sales at Less Than Fair Value and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-10

    ... limited to, sugars, minerals, and salts. Xanthan gum is a polysaccharide produced by aerobic fermentation... consists of a backbone of two P-1,4-D- Glucose monosaccharide units, the second with a trisaccharide side chain consisting of P-D-Mannose-(1,4)- P-DGlucuronic acid-(1,2) - a-D- Mannose monosaccharide units. The...

  12. Guar Gum Stimulates Biogenic Sulfide Production at Elevated Pressures: Implications for Shale Gas Extraction

    PubMed Central

    Nixon, Sophie L.; Walker, Leanne; Streets, Matthew D. T.; Eden, Bob; Boothman, Christopher; Taylor, Kevin G.; Lloyd, Jonathan R.

    2017-01-01

    Biogenic sulfide production is a common problem in the oil industry, and can lead to costly hydrocarbon processing and corrosion of extraction infrastructure. The same phenomenon has recently been identified in shale gas extraction by hydraulic fracturing, and organic additives in fracturing fluid have been hypothesized to stimulate this process. Constraining the relative effects of the numerous organic additives on microbial metabolism in situ is, however, extremely challenging. Using a bespoke bioreactor system we sought to assess the potential for guar gum, the most commonly used gelling agent in fracturing fluids, to stimulate biogenic sulfide production by sulfate-reducing microorganisms at elevated pressure. Two pressurized bioreactors were fed with either sulfate-amended freshwater medium, or low-sulfate natural surface water, in addition to guar gum (0.05 w/v%) and an inoculum of sulfate-reducing bacteria for a period of 77 days. Sulfide production was observed in both bioreactors, even when the sulfate concentration was low. Analysis of 16S rRNA gene sequences indicate that heterotrophic bacteria closely associated with the genera Brevundimonas and Acinetobacter became enriched early in the bioreactor experiments, followed by an increase in relative abundance of 16S rRNA genes associated with sulfate-reducing bacteria (Desulfosporosinus and Desulfobacteraceae) at later time points. Results demonstrate that guar gum can stimulate acid- and sulfide-producing microorganisms at elevated pressure, and may have implications for the potential role in microbially induced corrosion during hydraulic fracturing operations. Key differences between experimental and in situ conditions are discussed, as well as additional sources of carbon and energy for biogenic sulfide production during shale gas extraction. Our laboratory approach can be tailored to better simulate deep subsurface conditions in order to probe the role of other fracturing fluid additives and downhole

  13. Guar Gum Stimulates Biogenic Sulfide Production at Elevated Pressures: Implications for Shale Gas Extraction.

    PubMed

    Nixon, Sophie L; Walker, Leanne; Streets, Matthew D T; Eden, Bob; Boothman, Christopher; Taylor, Kevin G; Lloyd, Jonathan R

    2017-01-01

    Biogenic sulfide production is a common problem in the oil industry, and can lead to costly hydrocarbon processing and corrosion of extraction infrastructure. The same phenomenon has recently been identified in shale gas extraction by hydraulic fracturing, and organic additives in fracturing fluid have been hypothesized to stimulate this process. Constraining the relative effects of the numerous organic additives on microbial metabolism in situ is, however, extremely challenging. Using a bespoke bioreactor system we sought to assess the potential for guar gum, the most commonly used gelling agent in fracturing fluids, to stimulate biogenic sulfide production by sulfate-reducing microorganisms at elevated pressure. Two pressurized bioreactors were fed with either sulfate-amended freshwater medium, or low-sulfate natural surface water, in addition to guar gum (0.05 w/v%) and an inoculum of sulfate-reducing bacteria for a period of 77 days. Sulfide production was observed in both bioreactors, even when the sulfate concentration was low. Analysis of 16S rRNA gene sequences indicate that heterotrophic bacteria closely associated with the genera Brevundimonas and Acinetobacter became enriched early in the bioreactor experiments, followed by an increase in relative abundance of 16S rRNA genes associated with sulfate-reducing bacteria ( Desulfosporosinus and Desulfobacteraceae) at later time points. Results demonstrate that guar gum can stimulate acid- and sulfide-producing microorganisms at elevated pressure, and may have implications for the potential role in microbially induced corrosion during hydraulic fracturing operations. Key differences between experimental and in situ conditions are discussed, as well as additional sources of carbon and energy for biogenic sulfide production during shale gas extraction. Our laboratory approach can be tailored to better simulate deep subsurface conditions in order to probe the role of other fracturing fluid additives and downhole

  14. Formulation and in vitro evaluation of xanthan gum or carbopol 934-based mucoadhesive patches, loaded with nicotine.

    PubMed

    Abu-Huwaij, Rana; Obaidat, Rana M; Sweidan, Kamal; Al-Hiari, Yusuf

    2011-03-01

    Bilayer nicotine mucoadhesive patches were prepared and evaluated to determine the feasibility of the formulation as a nicotine replacement product to aid in smoking cessation. Nicotine patches were prepared using xanthan gum or carbopol 934 as a mucoadhesive polymers and ethyl cellulose as a backing layer. The patches were evaluated for their thickness, weight and content uniformity, swelling behavior, drug-polymers interaction, adhesive properties, and drug release. The physicochemical interactions between nicotine and the polymers were investigated by Fourier transform infrared (FTIR) spectroscopy. Mucoadhesion was assessed using two-arm balance method, and the in vitro release was studied using the Franz cell. FTIR revealed that there was an acid base interaction between nicotine and carbopol as well as nicotine and xanthan. Interestingly, the mucoadhesion and in vitro release studies indicated that this interaction was strong between the drug and carbopol whereas it was weak between the drug and xanthan. Loading nicotine concentration to non-medicated patches showed a significant decrease in the mucoadhesion strength of carbopol patches and no significant effect on the mucoadhesion strength of xanthan patches. In vitro release studies of the xanthan patches showed a reasonable fast initial release profile followed by controlled drug release over a 10-h period. © 2010 American Association of Pharmaceutical Scientists

  15. Effect of the aerated structure on selected properties of freeze-dried hydrocolloid gels

    NASA Astrophysics Data System (ADS)

    Ciurzyńska, Agnieszka; Lenart, Andrzej

    2016-01-01

    The ability to create diverse structures and studies on the effect of the aerated structure on selected properties with the use of freeze-dried gels may provide knowledge about the properties of dried foods. Such gels can be a basis for obtaining innovative food products. For the gel preparation, 3 types of hydrocolloids were used: low-methoxyl pectin, a mixture of xanthan gum and locust-bean gum, and a mixture of xanthan gum and guar gum. Gels were aerated for 3 and 7 min, frozen at a temperature of -45°C 2 h-1, and freeze-dried at a temperature of 30°C. For the samples obtained, structure, porosity, shrinkage, rehydration, and colour were investigated. It was shown that the type of the hydrocolloid and aeration time influence the structure of freeze-dried gels, which determines such properties of samples as porosity, shrinkage, density, rehydration, and colour. The bigger pores of low-methoxyl pectin gels undergo rehydration in the highest degree. The delicate and aerated structure of gels with the mixture of xanthan gum and locust-bean gum was damaged during freeze-drying and shrinkage exhibited the highest value. Small pores of samples with the mixture of xanthan gum and guar gum were responsible for the lower rehydration properties, but the highest porosity value contributed to the highest lightness value.

  16. 78 FR 13379 - Xanthan Gum from Austria and China; Scheduling of the Final Phase of an Antidumping Investigation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-27

    ..., sugars, minerals, and salts. Xanthan gum is a polysaccharide produced by aerobic fermentation of... backbone of two P-1,4-D- Glucose monosaccharide units, the second with a trisaccharide side chain consisting of P-D-Mannose-(1,4)-P-DGlucuronic acid-(1,2)-a-D- Mannose monosaccharide units. The terminal...

  17. The effect of high-molecular-weight guar gum on net apparent glucose absorption and net apparent insulin and gastric inhibitory polypeptide production in the growing pig: relationship to rheological changes in jejunal digesta.

    PubMed

    Ellis, P R; Roberts, F G; Low, A G; Morgan, L M

    1995-10-01

    The present study was designed to determine the quantitative effects of starchy meals containing guar gum on rates of net apparent glucose absorption and net apparent insulin and gastric inhibitory polypeptide (GIP) production in growing pigs. The effects of these meals on the viscosity of jejunal digesta were also examined and correlated to changes in glucose absorption. Four growing pigs were each given either a low-fat semi-purified diet (control) or the same diet supplemented with a high-molecular-weight guar gum at concentrations in the diet of 20 or 40 g/kg. Blood samples were removed simultaneously via indwelling catheters from the mesenteric artery and the hepatic portal vein. Samples of jejunal digesta were removed via a T-piece cannula and used immediately for viscosity measurements at 39 degrees. The 'zero-shear' viscosity of each sample was then calculated. Blood-flow measurements were made using an ultrasonic flow probe fitted to the hepatic portal vein. All measurements were made at intervals of 10 or 30 min during a 4 h postprandial period. Meals containing guar gum significantly increased (P < 0.05) the viscosity of jejunal digesta, an effect that was strongly dependent on the concentration of guar gum in the original diet. No significant differences in blood-flow rates were found between the control and guar-containing diets. Both concentrations of guar gum significantly reduced (P < 0.05) glucose absorption and insulin and GIP secretion rates over the 4 h postprandial period. An inverse relationship between the rate of glucose absorption and the 'zero-shear' viscosity of jejunal digesta was found. This study also provides direct evidence for the important role played by the enteroinsular axis in modifying the glycaemic response to a meal containing guar gum.

  18. Rheological characteristics of cold thickened beverages containing xanthan gum-based food thickeners used for dysphagia diets.

    PubMed

    Cho, Hyun M; Yoo, Byoungseung

    2015-01-01

    Cold beverages are commonly thickened with commercial gum-based food thickeners for consumption by patients with dysphagia. In this study, the rheological properties of a thickened water and five thickened beverages (orange juice, apple juice, grape juice, whole milk, and a sport drink) that were prepared with four commercial instant xanthan gum-based thickeners (coded A-D) were investigated at a 3% thickener concentration. All thickened samples showed high shear-thinning behavior with yield stress at the serving temperature of 8°C. The magnitudes of apparent viscosity (ηa,50), consistency index (K), storage modulus (G'), and loss modulus (G'') of the thickened beverages, except for water, with food thickener A were significantly higher compared with other thickeners (B, C, and D) (P<0.05). The largest increases in K values for thickened beverages were observed at 1-hour storage, and at longer times their K values, except for milk, remained approximately constant. Rheological parameters demonstrated statistically significant differences in flow and dynamic behaviors between the cold thickened beverages prepared with the xanthan gum-based food thickeners (P<0.05), indicating that their rheological properties are strongly influenced by the dispersing medium, the type of food thickener, and storage time. In particular, appropriately selecting a commercial food thickener for preparing thickened beverages seems to be of importance for managing dysphagia. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  19. Xanthan Gum Production by Xanthomonas campestris pv. campestris IBSBF 1866 and 1867 from Lignocellulosic Agroindustrial Wastes.

    PubMed

    da Silva, Juliana Albuquerque; Cardoso, Lucas Guimarães; de Jesus Assis, Denilson; Gomes, Gleice Valéria Pacheco; Oliveira, Maria Beatriz Prior Pinto; de Souza, Carolina Oliveira; Druzian, Janice Izabel

    2018-05-05

    This study aimed to evaluate the properties of xanthan gum produced by Xanthomonas campestris pv. campestris 1866 and 1867 from lignocellulosic agroindustrial wastes. XG was produced using an orbital shaker in a culture medium containing coconut shell (CS), cocoa husks (CH), or sucrose (S) minimally supplemented with urea and potassium. The XG production results varied between the CS, CH, and S means, and it was higher with the CH in strains 1866 (4.48 g L -1 ) and 1867 (3.89 g L -1 ). However, there was more apparent viscosity in the S gum (181.88 mPas) and the CS gum (112.06 mPas) for both 1866 and 1867, respectively. The ability of XG CS and XG CH to emulsify different vegetable oils was similar to the ability of XG S . All gums exhibited good thermal stability and marked groups in the elucidation of compounds and particles with rough surfaces.

  20. Effect of guar on second-meal glucose tolerance in normal man.

    PubMed

    Trinick, T R; Laker, M F; Johnston, D G; Keir, M; Buchanan, K D; Alberti, K G

    1986-07-01

    Whole body glucose turnover and absorption of a 50 g glucose drink was studied in six healthy volunteers on two occasions, 4 h after a 'breakfast' of 50 g of glucose, mixed on one occasion with 20 g of guar gum. Plasma glucose concentrations were significantly reduced with guar gum compared with those obtained without guar gum (P less than 0.0001). Whole body glucose turnover studied by an intravenous primed dose constant infusion technique using D-[3-3H]glucose showed no significant difference between the two groups: 353 +/- 15 mmol with guar and 350 +/- 9 mmol without guar. Total oral glucose absorption, followed with a D-[1-14C]glucose tracer, was significantly decreased by guar treatment, being 219 +/- 3 mmol with guar and 239 +/- 5 mmol without guar (P less than 0.05). Serum insulin levels were lowered by guar treatment (P less than 0.05) while those of C-peptide, gastric inhibitory polypeptide, glucagon, cortisol and pancreatic polypeptide did not differ significantly. Blood lactate concentrations were raised in the guar treated group (P less than 0.05) whereas pyruvate, alanine, glycerol and 3-hydroxybutyrate concentrations did not differ significantly. These results support the suggestion that guar improves second-meal tolerance to glucose by decreasing absorption.

  1. Isolation and properties of an endo-β-mannanase-producing Bacillus sp. LX114 capable of degrading guar gum.

    PubMed

    Jiang, Baohang; Sun, Zhen; Hou, Yingmin; Yang, Lan; Yang, Fan; Chen, Xiaoyi; Li, Xianzhen

    2016-07-03

    Endo-β-mannanase, catalyzing the random hydrolysis of β-1,4-mannosidic linkage in the backbone of (hetero) mannan, can increase feed conversion efficiency of animal feed or form functional mannanooligosaccharides. In this study, a gram-positive, straight-rod, facultative anaeorobic bacterium producing endo-β-mannanase was isolated from soil sample. The isolate only fermented glucose, galactose, sorbose, and raffinose to acid. The test in hydrogen sulfide production was positive. Combining the data acquired from phenotypic analysis and phylogenetic analysis based on 16S rRNA gene sequences, this strain presumably represented a novel species of the genus Bacillus and was designated as LX114. The strain LX114 could break down guar gum molecules, leading to a rapid decrease of the viscosity of guar gum solutions. Endo-β-mannanase activity was also detected in the culture supernatant. The isolate LX114 would be useful for potential application in degrading plant cell walls for increasing feed conversion efficiency and formation of functional oligosaccharides.

  2. Transport of barium through dolomite rocks under the presence of guar gum and brine salinities of hydraulic fracturing wastewater

    NASA Astrophysics Data System (ADS)

    Ebrahimi, P.; Vilcaez, J.

    2017-12-01

    Hydraulic fracturing wastewater (HFW) containing high concentrations of Ba, is commonly disposed into the deep saline aquifers. We investigate the effect of brine salinity, competing cations (Ca and Mg), and guar gum (most common fracturing viscosifier) on the sorption and transport of Ba through dolomite rocks. To this aim, we have conducted batch sorption and core-flooding experiments at both ambient (22°C) and deep subsurface (60°C) temperature conditions. The effect of mineral composition is assessed by comparing batch and core-flooding experimental results obtained with sandstone and dolomite rocks. Batch sorption experiments conducted using powdered dolomite rocks (500-600 µm particle size) revealed that Ba sorption on dolomite greatly decreases with increasing brine salinity (0 - 180,000 mg-NaCl/L), and that at brine salinities of HFW, chloro-complexation reactions between Ba and Cl ions and changes in pH (that results from dolomite dissolution) are the controlling factors of Ba sorption on dolomite. Organo-complexation reactions between Ba and guar gum, and competition of Ba with common cations (Ca and Mg) for hydration sites of dolomite, play a secondary role. This finding is in accordance with core-flooding experimental results, showing that the transport of Ba through synthetic dolomite rocks of high flow properties (25-29.6% porosity, 9.6-13.7 mD permeability), increases with increasing brine salinity (0-180,000 mg-NaCl/L), while the presence of guar gum (50-500 mg/L) does not affect the transport of Ba. On the other hand, core-flooding experiments conducted using natural dolomite core plugs (6.5-8.6% porosity, 0.06-0.3 mD permeability), indicates that guar gum can clog the pore throats of tight dolomite rocks retarding the transport of Ba. Results of our numerical simulation studies indicate that the mechanism of Ba sorption on dolomite can be represented by a sorption model that accounts for both surface complexation reactions on three distinct

  3. Removal of chromium (VI) using poly(methylacrylate) functionalized guar gum.

    PubMed

    Singh, Vandana; Kumari, Premlata; Pandey, Sadanand; Narayan, Tripti

    2009-03-01

    Using persulfate/ascorbic acid redox pair, poly(methylacrylate) was grafted on to guar gum and the conditions for the grafting were optimized. The copolymer sample having maximum %G was evaluated for the removal of Cr(VI) and the sorption conditions were optimized. The sorption was found pH dependent, pH 1.0 being the optimum value. Sorption data at pH 1.0 were modeled using both the Langmuir and Freundlich isotherms where the data fitted better to Freundlich isotherm. The equilibrium sorption capacity of 29.67mg/g was determined from the Langmuir isotherm. The sorption followed a pseudo-second-order kinetics with a rate constant 2.5x10(-4)gmg(-1) min(-1). The grafted product was also evaluated for Cr(VI) removal from local electroplating industrial waste water. The regeneration experiments revealed that the guar-graft-poly(methylacrylate) could be successfully reused for five cycles. In the present study conductivity measurements were used instead of conventional photometric method for determining Cr(VI) concentration in the equilibrium solutions and the results obtained have been compared with photometric method. Optimum Cr(VI) binding under highly acidic conditions indicated significant contribution of non electrostatic forces in the adsorption process.

  4. Rheology of different hydrocolloids–rice starch blends. Effect of successive heating–cooling cycles

    USDA-ARS?s Scientific Manuscript database

    Hydrocolloids are frequently used for modifying starch functionality. In the present study the possible interaction of three different hydrocolloids - guar gum, hydroxypropylmethylcellulose (HPMC) and xanthan gum - with rice starch was explored by determining the pasting, viscoelastic and swelling ...

  5. Effect of CMC addition on steady and dynamic shear rheological properties of binary systems of xanthan gum and guar gum.

    PubMed

    Bak, J H; Yoo, B

    2018-04-12

    The effect of CMC on the steady and dynamic shear rheological properties of binary mixtures of XG and GG was examined at different mixing ratios. All XG-GG-CMC ternary mixtures had high shear-thinning behavior and the n value of the sample with 5% CMC was the smallest compared with those of other samples. A marked increase in K and η a,50 values was observed for ternary mixtures at a lower content (5%) of CMC, indicating that the synergistic interactions of the XG-GG binary mixture were affected by the content of CMC. The effect of temperature on the η a,50 was well described by the Arrhenius equation for all samples. The activation energy values of all ternary gum mixtures are higher than that of binary gum mixture, and these values also decreased with an increase in CMC content from 5 to 15%. The dynamic moduli of ternary gum mixtures decreased with an increase in CMC content. The tan δ value of the ternary gum mixture with 5% CMC was much lower than those of other ternary mixtures. In general, these results suggest that the flow and dynamic shear rheological properties of XG-GG binary mixtures are strongly influenced by a small addition of CMC. Copyright © 2018. Published by Elsevier B.V.

  6. Optimization of gluten-free formulations for French-style breads.

    PubMed

    Mezaize, S; Chevallier, S; Le Bail, A; de Lamballerie, M

    2009-04-01

    The formulation of gluten-free bread, which will be suitable for patients with coeliac disease, was optimized to provide bread similar to French bread. The effects of the presence of hydrocolloids and the substitution of the flour basis by flour or proteins from different sources were studied. The added ingredients were (1) hydrocolloids (carboxymethylcellulose [CMC], guar gum, hydroxypropylmethylcellulose [HPMC], and xanthan gum), and (2) substitutes (buckwheat flour, whole egg powder, and whey proteins). The bread quality parameters measured were specific volume, dry matter of bread, crust color, crumb hardness, and gas cell size distribution. Specific volume was increased by guar gum and HPMC. Breads with guar gum had color characteristics similar to French bread. Hardness decreased with the addition of hydrocolloids, especially HPMC and guar. Breads with guar gum had the most heterogeneous cell size distribution, and guar gum was therefore selected for further formulations. Bread prepared with buckwheat flour had improved quality: an increased specific volume, a softer texture, color characteristics, and gas-cell size distribution similar to French bread. Bread with 1.9% guar gum (w/w, total flour basis) and 5% buckwheat flour (of all flours and substitutes) mimicked French bread quality attributes.

  7. Development and evaluation of Ca(+ 2) ion cross-linked carboxymethyl xanthan gum tablet prepared by wet granulation technique.

    PubMed

    Maity, Siddhartha; Sa, Biswanath

    2014-08-01

    The objective of this work was to study the release behavior of prednisolone from calcium-cross-linked carboxymethyl xanthan gum (CMXG) tablets in dissolution medium having different pH values prevailing in the gastrointestinal lumen. Xanthan gum (XG) was derivatized to CMXG which was then cross-linked in situ with Ca(+2) ion during wet massing step of tablet preparation. Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry studies did not show any drug-polymer interaction although the drug underwent solid-state transformation during compression as evident from X-ray diffraction analysis. In vitro release study demonstrated that increase in the amount of Ca(+2) ion decreased the drug release, and beyond a certain amount, the drug release increased. While increase in both drug load and tablet crushing strength decreased the drug release, increase in exposure time in acid solution of pH 1.2 increased the overall release of the drug. The mechanism of drug release was non-Fickian/anomalous. The results indicated that variation in the amount of Ca(+2) ion can modulate the drug release from CMXG matrix tablets as needed.

  8. Intrinsic viscosity and rheological properties of natural and substituted guar gums in seawater.

    PubMed

    Wang, Shibin; He, Le; Guo, Jianchun; Zhao, Jinzhou; Tang, Hongbiao

    2015-05-01

    The intrinsic viscosity and rheological properties of guar gum (GG), hydroxypropyl guar (HPG) and carboxymethyl guar (CMG) in seawater and the effects of shear rate, concentration, temperature and pH on these properties were investigated. An intrinsic viscosity-increasing effect was observed with GG and HPG in seawater (SW) compared to deionized water (DW), whereas the intrinsic viscosity of CMG in seawater was much lower than that in DW due to a screening effect that reduced the repulsion between the polymer chains. Regardless of the functional groups, all sample solutions was well characterized by a modified Cross model that exhibited the transition from Newtonian to pseudoplastic in the low shear rate range at the concentrations of interest to industries, and their viscosity increased with the increase in their concentration but decreased with the increase in temperature. In contrast to nonionic GG or HPG, anionic CMG had a slightly decreased viscosity property in SW, exhibiting polyelectrolyte viscosity behavior. The α value in the zero-shear rate viscosity vs. concentration power-law equation for the samples gave the order of CMG>HPG>GG while the SW solution of CMG had the lowest viscous flow activation energy and exhibited a strong pH-dependent viscosity by a different shear rate. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. Effect of pH on the rheological properties of borate crosslinked hydroxypropyl guar gum hydrogel and hydroxypropyl guar gum.

    PubMed

    Wang, Shibin; Tang, Hongbiao; Guo, Jianchun; Wang, Kunjie

    2016-08-20

    pH is an important factor affecting the performance of polymer fluid. The rheological properties of hydroxypropyl guar gum (HPG) base fluid and the structural strength, rheological properties, viscoelastic properties and thixotropy properties of HPG gel depend largely on the pH values. For the base fluid, an apparent viscosity-increasing effect was observed over the pH range from 7 to 11, and the apparent viscosity gradually decreased at pH 11.5-14, exhibiting electrostatic repulsion behavior and steric effects. For the HPG gel, at pH 7-12.5, the gel possessed higher apparent viscosity, higher elastic modulus (G'), lower tanδ (the ratio of the viscous modulus to the elastic modulus) and an "8"-shaped hysteresis loop, indicating stronger gel structure strength and the elastic dominant property. At pH 13-13.5, the gel samples exhibited the transition from a pseudoplastic fluid to a Newtonian fluid, and their viscosity, elastic modulus decreased but tanδ increased with the increase in pH values, exhibiting gradually weakened elastic properties. When the pH was 14, the gel mainly exhibited viscous characteristics. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Effect of brine salinity and guar gum on the transport of barium through dolomite rocks: Implications for unconventional oil and gas wastewater disposal.

    PubMed

    Ebrahimi, Pouyan; Vilcáez, Javier

    2018-05-15

    This research aimed to elucidate the effect of brine salinity and guar gum on the sorption and transport of Ba in dolomite rocks collected from the Arbuckle formation in Oklahoma, USA. Guar gum represents the most important organic additive used in viscosified fracturing fluids, and Ba constitutes the most common and abundant heavy metal found in unconventional oil and gas (UOG) wastewater. Batch experiments conducted using powdered dolomite rocks (500-600 μm particle size) revealed that at brine salinities of UOG wastewater, chloro-complexation reactions between Ba and Cl ions and pH changes that results from dolomite dissolution are the controlling factors of Ba sorption on dolomite. Competition of Ba with common cations (Ca and Mg) for hydration sites of dolomite, plays a secondary role. Core-flooding experiments conducted to analyze the transport of Ba through natural and synthetic dolomite core plugs are in agreement with the batch sorption experimental results. The transport of Ba through dolomite rocks, increases with increasing brine salinity (0-180,000 mg-NaCl/L). The presence guar gum (50-500 mg/L) does not affect the transport of Ba through dolomite rocks of high flow properties (25-29.6% porosity, 9.6-13.7 mD permeability). However, core-flooding experiments conducted using tight dolomite rocks (6.5-8.6% porosity, 0.06-0.3 mD permeability), revealed that guar gum can retard the transport of Ba by clogging high permeability/porosity regions of tight dolomite rocks. The mechanism of Ba sorption on dolomite can be represented by a sorption model that accounts for both surface complexation reactions on three distinct hydration sites (>CaOH o , >MgOH o , and >CO 3 H o ), and the kinetic dissolution of dolomite. These results are important in understanding and predicting the fate of Ba present in UOG wastewater disposed into deep dolomite saline aquifers. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Guar by-product improves carbohydrate tolerance in healthy human subjects.

    PubMed

    Track, N S; Lai, V W; Chiu, S S

    1985-08-01

    Guar gum possesses distinct hypoglycemic properties. The other fraction of the guar bean, guar by-product (GBP), was studied to determine if it possesses any hypoglycemic properties. When 25 g GBP or wheat bran were consumed with a carbohydrate test meal by 10 healthy subjects, at 15 and 30 min after the GBP test meal significantly lower normalized plasma glucose responses were measured. Postprandial plasma insulin responses were similar after both test meals. During the first 60 min postprandially, the mean integrated plasma glucose response area was significantly lower after the GBP test meal. These data indicate that GBP, like guar gum, possesses hypoglycemic properties; because of the different chemical characteristics of these 2 guar bean fractions, it seems that their hypoglycemic properties are due probably to different mechanisms.

  12. Effect of gums on the rheological, microstructural and extrusion printing characteristics of mashed potatoes.

    PubMed

    Liu, Zhenbin; Zhang, Min; Bhandari, Bhesh

    2018-06-10

    This paper studied the rheological, microstructural and 3D printing characteristics of mashed potatoes (MP) with gums of xanthan (XG), guar (GG), k-carrageenan (KG) and k-carrageenan- xanthan gum blend (KG-XG). Addition of gums increased the viscosity, storage modulus (G'), and loss modulus (G″) of MP except XG. Creep results indicated that self-supporting performance followed decreasing order of KG > KG-XG > GG > contorl > XG. Fourier Transform infrared spectroscopy (FT-IR) and Nuclear Magnetic Resonance (NMR) results well explained the behavior by enhancing hydrogen bonding and constraining water molecules' mobility. KG-MP samples possessed good self-supporting performance but with rough surface and lots of defective points. The parts printed using XG-MP were "fatter" than target objects but with a smooth surface structure. This probably because the excellent extrudability (more fluid-like behavior, tanδ 0.185) but with poor self-supporting ability indicated by lower G' and greater creep strain 0.88%. The printed objects using KG-XG-MP possessed a smooth surface structure (visual appearance), and good printing precision indicated by the lowest dimensional printing deviation for a printed cuboid shape (2.19%, 2.20%, 2% for length, width, height direction, respectively). This was probably because the creaminess effect provided by XG render the printed objects a smooth surface structure, while KG provided MP with sufficient mechanical strength (proper G' and load bearing capacity) to be capable of self-supporting. Copyright © 2017. Published by Elsevier B.V.

  13. Pressure-controlled injection of guar gum stabilized microscale zerovalent iron for groundwater remediation.

    PubMed

    Luna, M; Gastone, F; Tosco, T; Sethi, R; Velimirovic, M; Gemoets, J; Muyshondt, R; Sapion, H; Klaas, N; Bastiaens, L

    2015-10-01

    The paper reports a pilot injection test of microsized zerovalent iron (mZVI) dispersed in a guar gum shear thinning solution. The test was performed in the framework of the EU research project AQUAREHAB in a site in Belgium contaminated by chlorinated aliphatic hydrocarbons (CAHs). The field application was aimed to overcome those critical aspects which hinder mZVI field injection, mainly due to the colloidal instability of ZVI-based suspensions. The iron slurry properties (iron particles size and concentration, polymeric stabilizer type and concentration, slurry viscosity) were designed in the laboratory based on several tests (reactivity tests towards contaminants, sedimentation tests and rheological measurements). The particles were delivered into the aquifer through an injection well specifically designed for controlled-pressure delivery (approximately 10 bars). The well characteristics and the critical pressure of the aquifer (i.e. the injection pressure above which fracturing occurs) were assessed via two innovative injection step rate tests, one performed with water and the other one with guar gum. Based on laboratory and field preliminary tests, a flow regime at the threshold between permeation and preferential flow was selected for mZVI delivery, as a compromise between the desired homogeneous distribution of the mZVI around the injection point (ensured by permeation flow) and the fast and effective injection of the slurry (guaranteed by high discharge rates and injection pressure, resulting in the generation of preferential flow paths). A monitoring setup was designed and installed for the real-time monitoring of relevant parameters during injection, and for a fast determination of the spatial mZVI distribution after injection via non-invasive magnetic susceptibility measurements. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. Effects of guar gum, ispaghula and microcrystalline cellulose on abdominal symptoms, gastric emptying, orocaecal transit time and gas production in healthy volunteers.

    PubMed

    Bianchi, M; Capurso, L

    2002-09-01

    Dietary fibres are carbohydrates that resist hydrolysis by human intestinal enzymes but are fermented by colonic microflora. Soluble dietary fibres are fermented by anaerobic bacteria with production of gases, short chain fatty acids and other metabolic products believed to cause symptoms such as bloating, abdominal distension, flatulence. Insoluble fibres are only partially fermented, serving almost exclusively as bulking agents that result in shorter transit time and increased faecal mass. To evaluate effect of a supplementation of a single 5 g dose of dietary fibre to a solid meal on gastric emptying, orocaecal transit time, gas production and symptom genesis, in healthy volunteers. Three different dietary fibres were tested, two soluble (guar gum and ispaghula] and one insoluble (microcrystalline cellulose). After a 24-hour low fibre diet, 10 healthy subjects had a standard meal consisting of white bread and one 70 g egg the yolk of which was mixed with 100 mg of 13C octanoic acid and fried. Breath samples were collected for 13CO2 measurements with a mass spectrophotometer and excretion curve (Tlag, T1/2) evaluation. Further breath samples were collected and analysed with a gas chromatograph for the evaluation of H2 and CH4 production and orocaecal transit time. Each evaluation was repeated adding to standard meal, diluted in 300 ml tap water, respectively: a single 5 g dose of microcrystalline cellulose, guar gum or ispaghula. Subjects were asked to report all symptoms experienced from time of meal ingestion over 24 hours, evaluating the intensity. Dietary fibres did not significantly change gastric emptying (Tlag, T1/2) and orocaecal transit time of standard meal. Subjects experienced more symptoms when meals were supplemented with guar gum (p=0.009 vs standard meal) and ispaghula (p=0.048 vs standard meal). There was a poor, but significant, correlation between gas production and symptoms (r=0. 38, p=0. 01). Addition of different dietary fibres to a solid

  15. Preparation of guar gum scaffold film grafted with ethylenediamine and fish scale collagen, cross-linked with ceftazidime for wound healing application.

    PubMed

    Jana, Piyali; Mitra, Tapas; Selvaraj, Thirupathi Kumara Raja; Gnanamani, A; Kundu, P P

    2016-11-20

    Present study describes the synthesis of carboxymethyl guar gum (CMGG) from the native guar gum (GG) and the prepared CMGG is grafted with ethylenediamine (EDA) to form aminated CMGG. Then, fish scale collagen and aminated CMGG are cross-linked by ceftazidime drug through non- covalent ionic interaction. The resultant cross-linked film is subjected to the analysis of (1)HNMR, ATR-FTIR, TGA, SEM and XRD. The TNBS results revealed that 45% of interaction between EDA and CMGG and 90-95% of Ceftazidime is released from aminated CMGG-Ceftazidime-Collagen (ACCC) film after 96h of incubation at physiological pH. In vitro cell line studies reveal the biocompatibility of the cross-linked film and the antimicrobial studies display the growth inhibition against Staphylococcus aureus and Pseudomonas aeruginosa organisms. Overall, the study indicates that the incorporation of Ceftazidime into collagen and aminated CMGG can improve the functional property of aminated CMGG as well as collagen, leading to its biomedical applications. Copyright © 2016. Published by Elsevier Ltd.

  16. Fast microwave-assisted green synthesis of xanthan gum grafted acrylic acid for enhanced methylene blue dye removal from aqueous solution.

    PubMed

    Makhado, Edwin; Pandey, Sadanand; Nomngongo, Philiswa N; Ramontja, James

    2017-11-15

    In the present project, graft polymerization was employed to synthesis a novel adsorbent using acrylic acid (AA) and xanthan gum (XG) for cationic methylene dye (MB + ) removal from aqueous solution. The XG was rapidly grafted with acrylic acid (CH 2 =CHCOOH) under microwave heating. Fourier-transform infrared spectroscopy (FTIR), Proton Nuclear magnetic resonance spectroscopy ( 1 H NMR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Thermal gravimetric analysis (TGA) techniques were used to verify the adsorbent formed under optimized reaction conditions. Optimum reaction conditions [AA (0.4M), APS (0.05M), XG (2gL -1 ), MW power (100%), MW time (80s)] offer maximum %G and %GE of 484 and 78.3, respectively. The removal ratio of adsorbent to MB + reached to 92.8% at 100mgL -1 . Equilibrium and kinetic adsorptions of dyes were better explained by the Langmuir isotherm and pseudo second-order kinetic model respectively. The results demonstrate xanthan gum grafted polyacrylic acid (mw XG-g-PAA) absorbent had the universality for removal of dyes through the chemical adsorption mechanism. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Effect of viscous fiber (guar) on postprandial motor activity in human small bowel.

    PubMed

    Schönfeld, J; Evans, D F; Wingate, D L

    1997-08-01

    Both caloric value and chemical composition of a meal have been shown to regulate postprandial small bowel motility in dog. In the same species, duration of and contractile activity within the postprandial period also depends on mean viscosity. It is unknown, however, whether meal viscosity and fiber content also regulate small bowel motor activity in man. In human volunteers, we therefore studied the effect of guar gum on small bowel motor response to liquid and solid meals. Twenty-six prolonged ambulatory small bowel manometry studies were performed in 12 volunteers. A total of 620 hr of recording were analyzed visually for phase III of the MMC and a validated computer program calculated the incidence and amplitude of contractions after ingestion of water (300 ml), a pure glucose drink (300 ml/330 kcal) or a solid meal (530 kcal) with and without 5 g of guar gum. Addition of 5 g of guar gum did not significantly delay reappearance of phase III after ingestion of water (59 +/- 11 vs 106 +/- 21 min; P = 0.09). However, guar gum significantly prolonged duration of postprandial motility pattern both after the glucose drink (123 +/- 19 vs 199 +/- 24 min; P < 0.05) and after the solid meal (310 +/- 92 vs 419 +/- 22 min; P = 0.005). Contractile activity during these periods was not affected by guar gum. This was true for mean incidence of contractions after water (1.9 +/- 0.3 vs 1.8 +/- 0.5 min-1), after the glucose drink (1.6 +/- 0.4 vs. 1.7 +/- 0.3 min-1) and after the solid meal (2.4 +/- 0.4 vs 2.6 +/- 0.4 min-1). Likewise, mean amplitude of contractions was not affected by guar gum after water (22.8 +/- 1.4 vs 20.9 +/- 1.9 mm Hg), after the glucose drink (20.5 +/- 1.4 vs 21.3 +/- 1.2), and after the solid meal (20.3 +/- 1.5 vs 21.5 +/- 1.6 mm Hg). Thus a guar gum-induced increase in chyme viscosity markedly prolonged duration of postprandial motor activity in the human small bowel. Contractile activity within the postprandial period, however, was not affected. We

  18. Water vapor permeability, mechanical, optical and sensorial properties of plasticized guar gumedible films

    USDA-ARS?s Scientific Manuscript database

    Edible films were prepared by casting method using guar gum and glycerol in different ratios. The concentration of guar gum was 1.0, 1.5 and 2.0% whereas glycerol concentration was 20, 30 and 40% (w/v). The water vapor permeability (WVP), mechanical properties (tensile strength and elongation), thic...

  19. Effect of guar gum and salt concentrations on drag reduction and shear degradation properties of turbulent flow of water in a pipe.

    PubMed

    Sokhal, Kamaljit Singh; Gangacharyulu, Dasaroju; Bulasara, Vijaya Kumar

    2018-02-01

    Concentrated solutions of guar gum in water (1000-3000ppm) with and without KCl salt (1000-4000ppm) were injected near the wall for a short period (2.5min) to investigate their effect on drag reduction in turbulent flow of water through a pipe (Re≈17000-45000). Relative to bulk solution, the concentrations of polymer and salt were 50-150ppm and 50-200ppm, respectively. A drag reduction of 71.45% was observed for 3000ppm of biopolymer without salt. Guar gum experienced mechanical degradation under high shear conditions and addition of KCl improved shear stability up to 47% (for Re≈45000). A polymer concentration of 3000ppm and salt concentration of 2000ppm in the injection fluid were found to be optimum for achieving the highest drag reduction with better shear stability. Results indicated that boundary layer injection shows better drag reduction ability than pre-mixed solutions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. New Guar Biopolymer Silver Nanocomposites for Wound Healing Applications

    PubMed Central

    Abdullah, Md Farooque; Das, Suvadra; Roy, Partha; Datta, Sriparna; Mukherjee, Arup

    2013-01-01

    Wound healing is an innate physiological response that helps restore cellular and anatomic continuity of a tissue. Selective biodegradable and biocompatible polymer materials have provided useful scaffolds for wound healing and assisted cellular messaging. In the present study, guar gum, a polymeric galactomannan, was intrinsically modified to a new cationic biopolymer guar gum alkylamine (GGAA) for wound healing applications. Biologically synthesized silver nanoparticles (Agnp) were further impregnated in GGAA for extended evaluations in punch wound models in rodents. SEM studies showed silver nanoparticles well dispersed in the new guar matrix with a particle size of ~18 nm. In wound healing experiments, faster healing and improved cosmetic appearance were observed in the new nanobiomaterial treated group compared to commercially available silver alginate cream. The total protein, DNA, and hydroxyproline contents of the wound tissues were also significantly higher in the treated group as compared with the silver alginate cream (P < 0.05). Silver nanoparticles exerted positive effects because of their antimicrobial properties. The nanobiomaterial was observed to promote wound closure by inducing proliferation and migration of the keratinocytes at the wound site. The derivatized guar gum matrix additionally provided a hydrated surface necessary for cell proliferation. PMID:24175306

  1. New guar biopolymer silver nanocomposites for wound healing applications.

    PubMed

    Ghosh Auddy, Runa; Abdullah, Md Farooque; Das, Suvadra; Roy, Partha; Datta, Sriparna; Mukherjee, Arup

    2013-01-01

    Wound healing is an innate physiological response that helps restore cellular and anatomic continuity of a tissue. Selective biodegradable and biocompatible polymer materials have provided useful scaffolds for wound healing and assisted cellular messaging. In the present study, guar gum, a polymeric galactomannan, was intrinsically modified to a new cationic biopolymer guar gum alkylamine (GGAA) for wound healing applications. Biologically synthesized silver nanoparticles (Agnp) were further impregnated in GGAA for extended evaluations in punch wound models in rodents. SEM studies showed silver nanoparticles well dispersed in the new guar matrix with a particle size of ~18 nm. In wound healing experiments, faster healing and improved cosmetic appearance were observed in the new nanobiomaterial treated group compared to commercially available silver alginate cream. The total protein, DNA, and hydroxyproline contents of the wound tissues were also significantly higher in the treated group as compared with the silver alginate cream (P < 0.05). Silver nanoparticles exerted positive effects because of their antimicrobial properties. The nanobiomaterial was observed to promote wound closure by inducing proliferation and migration of the keratinocytes at the wound site. The derivatized guar gum matrix additionally provided a hydrated surface necessary for cell proliferation.

  2. Formulation and in vitro characterization of xanthan gum-based sustained release matrix tables of isosorbide-5- mononitrate.

    PubMed

    Kar, Rajat; Mohapatra, Snehamayee; Bhanja, Satyabrata; Das, Debjyoti; Barik, Bhaktibhusan

    2010-01-01

    In the present investigation an attempt has been made to increase therapeutic efficacy, to reduce frequency of administration and to improve patient compliance by developing a sustained release matrix tablets of isosorbide-5-mononitrate. Sustained release matrix tablets of isosorbide-5-mononitrate were developed by using different drug: polymer ratios, such in F1 (1:0.75), F2 (1:1), F3 (1:1.5), F4 (1:1.75) and F6 (1:2). Xanthan gum was used as matrix former and microcrystalline cellulose as diluent. All the lubricated formulations were compressed, using 8mm flat faced punches. Compressed tablets were evaluated for uniformity of weight, content of active ingredient, friability, hardness, thickness, in vitro dissolution study using basket method and swelling index. Each formulation showed compliance with pharmacopoeial standards. Among all formulations, F5 showed a greater sustained release pattern of drug over a 12 h period with 92.12% of drug being released. The kinetic studies showed that drug release follows the Higuchi model (r(2) =0.9851). Korsemeyer and Peppas equation gave an n-value of 0.4566, which was close to 0.5, indicating that drug release follows the Fickian diffusion. Thus, xanthan gum can be used as an effective matrix former to extend the release of isosorbide-5-mononitrate. No significant difference was observed in the dissolution profile of optimized formulation, using basket and paddle apparatus.

  3. Budesonide-Loaded Guar Gum Microspheres for Colon Delivery: Preparation, Characterization and in Vitro/in Vivo Evaluation

    PubMed Central

    Liu, Ye; Zhou, Hong

    2015-01-01

    A novel budesonide (BUD) colon delivery release system was developed by using a natural polysaccharide, guar gum. The rigidity of the microspheres was induced by a chemical cross-linking method utilizing glutaraldehyde as the cross-linker. The mean particle size of the microspheres prepared was found to be 15.21 ± 1.32 µm. The drug loading and entrapment efficiency of the formulation were 17.78% ± 2.31% and 81.6% ± 5.42%, respectively. The microspheres were spherical in shape with a smooth surface, and the size was uniform. The in vitro release profiles indicated that the release of BUD from the microspheres exhibited a sustained release behavior. The model that fitted best for BUD released from the microspheres was the Higuchi kinetic model with a correlation coefficient r = 0.9993. A similar phenomenon was also observed in a pharmacokinetic study. The prolongation of the half-life (t1/2), enhanced residence time (mean residence time, MRT) and decreased total clearance (CL) indicated that BUD microspheres could prolong the acting time of BUD in vivo. In addition, BUD guar gum microspheres are thought to have the potential to maintain BUD concentration within target ranges for a long time, decreasing the side effects caused by concentration fluctuation, ensuring the efficiency of treatment and improving patient compliance by reducing dosing frequency. None of the severe signs, like the appearance of epithelial necrosis and the sloughing of epithelial cells, were detected. PMID:25629228

  4. Effects of different hydrocolloids on properties of gluten-free bread based on small broken rice berry flour.

    PubMed

    Numfon, Rakkhumkaew

    2017-06-01

    Gluten-free bread formulations based on small broken rice berry using various types of hydrocolloids (xanthan gum, guar gum, and locust bean gum) at different concentrations (0, 1, 1.5, and 2 g/100 g) were tested in this study. The effects of hydrocolloid addition on the pasting properties of flour were also investigated, including the quality parameters of the breads. The pasting properties of small broken rice berry flour incorporated with guar gum were most affected. Gluten-free bread containing hydrocolloid showed improved qualities in terms of loaf specific volume, texture, sensory values, and microstructure. A 1 g/100 g of hydrocolloid addition was sufficient to improve the physical and chemical qualities of bread. The highest score of all attributes from the sensory evaluation was obtained by gluten-free bread containing 1 g/100 g guar gum.

  5. Rheological and fracturing characteristics of a novel sulfonated hydroxypropyl guar gum.

    PubMed

    Qiu, Liewei; Shen, Yiding; Wang, Tao; Wang, Chen

    2018-05-15

    A series of sulfonated hydroxypropyl guar gum (SHG) samples with different degrees of substitution (DSs) were prepared, and the SHG solution and SHG fracturing fluid were prepared and analyzed. The SHG aqueous solutions with different DSs all exhibit shear thinning behavior, which is well correlated with the Ostwald-deWaele model. Owing to the electrostatic repulsion of SHG molecular chains, SHG solutions with a higher DS will exhibit weaker thixotropic performance and strong anti-salinity ability. In addition, the SHG fracturing fluids, which were formed by interactions between SHG and organic zirconium, exhibit good temperature- and shear-resistant properties, proppant suspension properties, and salt tolerance. Furthermore, SHG gel-breaking fluids show low interfacial and surface tensions, with low residue content and small core permeability damage. These results provide useful indicators for the applications of SHG in the oil field industry. Copyright © 2017. Published by Elsevier B.V.

  6. Robust Guar Gum/Cellulose Nanofibrils Multilayer Films with Good Barrier Properties.

    PubMed

    Dai, Lei; Long, Zhu; Chen, Jie; An, Xingye; Cheng, Dong; Khan, Avik; Ni, Yonghao

    2017-02-15

    The pursuit of sustainable functional materials requires development of materials based on renewable resources and efficient fabrication methods. Hereby, we fabricated all-polysaccharides multilayer films using cationic guar gum (CGG) and anionic cellulose nanofibrils (i.e., TEMPO-oxidized cellulose nanofibrils, TOCNs) through a layer-by-layer casting method. This technique is based on alternate depositions of oppositely charged water-based CGG and TOCNs onto laminated films. The resultant polyelectrolyte multilayer films were transparent, ductile, and strong. More importantly, the self-standing films exhibited excellent gas (water vapor and oxygen) and oil barrier performances. Another outstanding feature of these resultant films was their resistance to various organic solvents including methanol, acetone, N,N-dimethylacetamide (DMAc) and tetrahydrofuran (THF). The proposed film fabrication process is environmentally benign, cost-effective, and easy to scale-up. The developed CGG/TOCNs multilayer films can be used as a renewable material for industrial applications such as packaging.

  7. Novel synergistic transparent k-Carrageenan/Xanthan gum/Gellan gum hydrogel film: Mechanical, thermal and water barrier properties.

    PubMed

    Balasubramanian, R; Kim, Sam Soo; Lee, Jaewoong

    2018-06-24

    The aim is to develop novel synergistic transparent k-Carrageenan/Xanthan gum/Gellan gum (k-C/X/G) hydrogel films with different weight ratio composition and to study the effect of these compositions on the physical properties of the films. The structure and morphological properties of the films were investigated by Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and differential scanning calorimeter (DSC). Results for FT-IR, DSC and SEM analysis showed a clear interaction between k-C, X, and G to form a new material. The mechanical, thermal and water barrier properties such as water vapor permeability (WVP), water contact angle (WCA) and moisture content were determined. The temperature at 5% weight loss (T 5% ) are in the range of 64.2-121.9 °C. The WVP exhibits are in the range of 1.8-2.4, contact angle are in the range of 32-65.8° and moisture content 16.5-21.51. The hydrogel film had good tensile strength of 19.1-31.0 MPa and elongation at break of 13-19% and tensile modulus of 1.6-2.4 GPa. The UV results indicate that the films were very transparent. The range of properties of the ternary k-C/X/G hydrogel films suggest that the presence molecular interaction and cross linking within the blends. Copyright © 2018. Published by Elsevier B.V.

  8. Quantitative measurement of negligible trypsin inhibitor activity and nutrient analysis of guar meal fractions.

    PubMed

    Lee, Jason T; Connor-Appleton, Stacey; Haq, Akram U; Bailey, Christopher A; Cartwright, Aubrey L

    2004-10-20

    A complete nutrient characterization of three possible products of guar bean processing does not apparently exist in the literature. Guar meal is a high-protein byproduct produced during extraction of galactomannan gum from the guar bean. During the extraction process, two fractions are produced (germ and hull). Germ and hull fractions are usually combined to form the marketed product, guar meal. Analyses characterized the nutrient, trypsin inhibitor, and galactomannan gum content of the three guar meal byproducts to determine which fraction is more valuable as an ingredient in poultry diets. Analyses indicated that the germ fraction is most appropriate for inclusion in poultry diets. Trypsin inhibitor activity previously reported as an antigrowth factor associated with guar meal was negligible and not considered to be a significant factor limiting its use in poultry feeds. Copyright 2004 American Chemical Society

  9. Improvement of viability of probiotic bacteria, organoleptic qualities and physical characteristics in kefir using transglutaminase and xanthan.

    PubMed

    Sabooni, Pooria; Pourahmad, Rezvan; Adeli, Hamid Reza Mahdavi

    2018-01-01

    Using kefir as a probiotic food carrier has many benefits. At the same time, it is considered an appropriate product for the dairy industry. The aim of this study was to evaluate the effect of xanthan gum and transglutaminase enzyme on the viability of probiotics and the organoleptic qualities and physicochemical characteristics of kefir. Three levels of transglutaminase enzyme (50, 100 and 150 ppm), and xanthan gum (0.05%, 0.1% and 0.2%) were used. Sensory and physicochemical properties and viability of probiotic bac- teria were measured over 2 weeks of storage at 4°C. By increasing the amounts of xanthan gum and transglutaminase, the viscosity of the samples was increased and syneresis was reduced significantly (P < 0.05). The kefir sample containing 150 ppm enzyme and 0.2% gum had the highest number of probiotic bacteria. Moreover, the highest organoleptic scores were found for this sample. It can be concluded that adding 150 ppm transglutaminase and 0.2% xanthan improved the vi- ability of probiotics and the physical and organoleptic characteristics of kefir.

  10. Interaction between xanthan gum and cationic cellulose JR400 in aqueous solution.

    PubMed

    Li, Haiping; Hou, Wanguo; Li, Xiuzhi

    2012-06-05

    The electrostatic and hydrogen bonding interactions between xanthan gum (XG) and semisynthetic cationic cellulose (JR400) in aqueous solution are investigated via stability map, FT-IR spectra, thermogravimetric analysis, potentiometric measurement and rheological method. The stability map shows three regions, a stable region with XG as the major component, a flocculated region and another stable region with JR400 as the major component. The stability of mixing system depends on both the concentration fraction of JR400 (fJR) and the overlapping concentrations of these two polymers. In the region near the stoichiometric fJR, the mixture shows stoichiometric flocculation, which is independent of the total polymer concentration. However, in the regions away from the stoichiometric fJR, the mixtures are stable when the concentration of major polymer component is higher than its overlapping concentration. In stable regions, the electrostatic and hydrogen bonding interactions can enhance the viscosity of mixing system at appropriate fJR values. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Microencapsulation of grape (Vitis labrusca var. Bordo) skin phenolic extract using gum Arabic, polydextrose, and partially hydrolyzed guar gum as encapsulating agents.

    PubMed

    Kuck, Luiza Siede; Noreña, Caciano Pelayo Zapata

    2016-03-01

    Bordo grape skin extract was microencapsulated by spray-drying and freeze-drying, using gum arabic (GA), partially hydrolyzed guar gum (PHGG), and polydextrose (PD) as encapsulating agents. Total phenolics and total monomeric anthocyanin, antioxidant activity, color, moisture, water activity (aw), solubility, hygroscopicity, glass transition temperature (Tg), particle size, and microstructure of the powders were evaluated. The retention of phenolics and anthocyanins ranged from 81.4% to 95.3%, and 80.8% to 99.6%, respectively, while the retention of antioxidant activity ranged from 45.4% to 83.7%. Treatments subjected to spray-drying had lower moisture, aw, and particle size, and greater solubility, while the freeze-dried samples were less hygroscopic. Tg values ranged from 10.1 to 52.2°C, and the highest values corresponded to the spray-dried microparticles. The spray-dried particles had spherical shape, while the freeze-dried powders showed irregular structures. The spray drying technique and the use of 5% PHGG and 5% PD has proven to be the best treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. 21 CFR 201.319 - Water-soluble gums, hydrophilic gums, and hydrophilic mucilloids (including, but not limited to...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Water-soluble gums, hydrophilic gums, and..., carboxymethylcellulose sodium, carrageenan, chondrus, glucomannan ((B-1,4 linked) polymannose acetate), guar gum, karaya... active ingredients; required warnings and directions. 201.319 Section 201.319 Food and Drugs FOOD AND...

  13. Ultrasound degradation of xanthan polymer in aqueous solution: Its scission mechanism and the effect of NaCl incorporation.

    PubMed

    Saleh, H M; Annuar, M S M; Simarani, K

    2017-11-01

    Degradation of xanthan polymer in aqueous solution by ultrasonic irradiation was investigated. The effects of selected variables i.e. sonication intensity, irradiation time, concentration of xanthan gum and molar concentration of NaCl in solution were studied. Combined approach of full factorial design and conventional one-factor-at-a-time was applied to obtain optimum degradation at sonication power intensity of 11.5Wcm -2 , irradiation time 120min and 0.1gL -1 xanthan in a salt-free solution. Molecular weight reduction of xanthan gum under sonication was described by an exponential decay function with higher rate constant for polymer degradation in the salt free solution. The limiting molecular weight where fragments no longer undergo scission was determined from the function. The incorporation of NaCl in xanthan solution resulted in a lower limiting molecular weight. The ultrasound-mediated degradation of aqueous xanthan polymer chain agreed with a random scission model. Side chain of xanthan polymer is proposed to be the primary site of scission action. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. The Development of High Transition Temperature Superconducting Ceramic Thick Films and Wire Composites

    DTIC Science & Technology

    1991-12-02

    number of protein or sugar agents were experimented with including Agar, pectin, carboxymethylcellulose, gelatin, alginic acid, xanthan gum , guar gum ...I) Introduction and Description of Scientific Goals 1 II) Material and Powder Synthesis 1 A) Freeze Dried Fabrication of Powders 1 B) Utilization of...composites. II). Material and Powder Synthesis The availability of a reliable technique for producing large quantities of phase pure, submicron powders

  15. Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres.

    PubMed

    Bhattacharya, Shiv Sankar; Mazahir, Farhan; Banerjee, Subham; Verma, Anurag; Ghosh, Amitava

    2013-10-15

    Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Xanthan gum production using jackfruit-seed-powder-based medium: optimization and characterization.

    PubMed

    Felicia Katherine, R; Muthukumaran, C; Sharmila, G; Manoj Kumar, N; Tamilarasan, K; Jaiganesh, R

    2017-08-01

    Xanthan gum (XG) production by Xanthomonas campestris NCIM 2961 using jackfruit seed powder (JSP) as a novel substrate was reported. Central composite design (CCD) of response surface method (RSM) was used to evaluate the linear and interaction effects of five medium variables (JSP, peptone, citric acid, K 2 HPO 4 and KH 2 PO 4 ) for XG production. Maximum XG production (51.62 g/L) was observed at the optimum level of JSP (4 g/L), peptone (0.93 g/L), citric acid (0.26 g/L), K 2 HPO 4 (1.29 g/L) and KH 2 PO 4 (0.5 g/L). K 2 HPO 4 and KH 2 PO 4 were found as significant medium components, which served as buffering agents as well as nutrients for X. campestris growth. The obtained biopolymer was characterized as XG by XRD and FTIR analysis. Results of this study revealed that JSP was found to be a suitable low cost substrate for XG production.

  17. Anomalous Diffusion of Particles Dispersed in Xanthan Solutions Subjected to Shear Flow

    NASA Astrophysics Data System (ADS)

    Takikawa, Yoshinori; Yasuta, Muneharu; Fujii, Shuji; Orihara, Hiroshi; Tanaka, Yoshimi; Nishinari, Katsuyoshi

    2018-05-01

    Xanthan gum exhibits viscoelastic and shear-thinning properties. We investigate the Brownian motion of particles dispersed in xanthan gum solutions that are subjected to simple shear flow. The mean square displacements (MSDs) are obtained in both the flow and vorticity directions. In the absence of shear flow, subdiffusion is observed, MSD ∝ tα with α < 1, where t is time. In the presence of shear flow, however, the exponent α becomes larger together with the MSD itself in both the flow and vorticity directions. We show that the diffusion is enhanced by Taylor dispersion in the flow direction, whereas in the vorticity direction it is enhanced by nonthermal self-diffusion.

  18. Multiple functionalities of Ni nanoparticles embedded in carboxymethyl guar gum polymer: catalytic activity and superparamagnetism

    NASA Astrophysics Data System (ADS)

    Sardar, Debasmita; Sengupta, Manideepa; Bordoloi, Ankur; Ahmed, Md. A.; Neogi, S. K.; Bandyopadhyay, Sudipta; Jain, Ruchi; Gopinath, Chinnakonda S.; Bala, Tanushree

    2017-05-01

    Composites comprising of metallic nanoparticles in polymer matrices have allured significant importance due to multifunctionalities. Here a simple protocol has been described to embed Ni nanoparticles in carboxymethyl guar gum (CMGG) polymer. The composite formation helps in the stabilization of Ni nanoparticles which are otherwise prone towards aerial oxidation. Further the nanoparticles retain their superparamagnetic nature and catalytic capacity. Ni-Polymer composite catalyses the reduction of 4-Nitrophenol to 4-Aminophenol very efficiently in presence of NaBH4, attaining a complete conversion under some experimental conditions. Ni-Polymer composite is well characterized using UV-vis spectroscopy, FTIR, XPS, powder XRD, TGA, SEM and TEM. A detailed magnetic measurement using superconducting quantum interference device-vibrating sample magnetometer (SQUID-VSM) reveals superparamagnetic behaviour of the composite.

  19. Preparation and Characterization of Selenium Incorporated Guar Gum Nanoparticle and Its Interaction with H9c2 Cells

    PubMed Central

    Soumya, Rema Sreenivasan; Vineetha, Vadavanath Prabhakaran; Reshma, Premachandran Latha; Raghu, Kozhiparambil Gopalan

    2013-01-01

    This study deals with the preparation and characterization of selenium incorporated guar gum nanoparticle (SGG), and its effect on H9c2 cardiomyoblast. Herein, nanoprecipitation techniques had been employed for the preparation of SGG nanoparticle. The prepared nanoparticle had been subjected to various types of analytical techniques like transmission electron microscopy (TEM), X-ray diffraction (XRD) and particle size analysis to confirm the characteristics of nanoparticle as well as for selenium incorporation. Physical characterization of nanoparticle showed that the size of nanoparticles increase upto ∼69–173 nm upon selenium incorporation from ∼41–132 nm. Then the prepared nanoparticles were evaluated for its effect on H9c2 cells. In this regard, the effect of nanoparticle on various vital parameters of H9c2 cells was studied. Parameters like cell viability, uptake of selenium incorporated guar gum nanoparticle by the cells, effect of SGG on DNA integrity, apoptosis, reactive oxygen species generation, alteration in transmembrane potential of mitochondria and cytoskeletal integrity had been investigated. Viability results showed that up to 25 nM of SGG was safe (10.31%) but beyond that it induces cytotoxicity. Cellular uptake of selenium showed that cell permeability for SGG is significantly high compared to normal selenium (7.2 nM of selenium for 25 nM SGG compared with 5.2 nM selenium for 25 nM sodium selenite). There was no apoptosis with SGG and also it protects DNA from hydroxyl radical induced breakage. Likewise no adverse effect on mitochondria and cytoskeleton was observed for 25 nM of SGG. Overall results reveal that SGG is highly suitable for biomedical research application. PMID:24098647

  20. Immunomodulatory effects of xanthan gum in LPS-stimulated RAW 264.7 macrophages.

    PubMed

    Liu, Fuyan; Zhang, Xiaofeng; Ling, Peixue; Liao, Joshua; Zhao, Mingsheng; Mei, Li; Shao, Huarong; Jiang, Peng; Song, Zhigang; Chen, Qixin; Wang, Fengshan

    2017-08-01

    In this study, we evaluated the immunomodulatory effects of xanthan gum (XG) in RAW264.7 macrophages and the underlying molecular mechanisms. We used scanning electron microscopy (SEM) to analyze the morphology of XG-treated RAW264.7 cells with and without lipopolysaccharide (LPS) stimulation and investigated the subsequent effects on nitric oxide (NO), interleukin-1β (IL-1β), interleukin-6 (IL-6), tumor necrosis factor (TNF-α), inducible nitric oxide synthase (iNOS), and cyclooxygenase-2 (COX-2) levels in LPS-activated mouse RAW264.7 macrophages. We also analyzed the binding affinity of XG to Toll-like receptor 4 (TLR4) with surface plasmon resonance (SPR) analysis and observed that XG decreased NO, IL-6 and TNF-α secretion into the culture medium and iNOS and COX-2 protein levels induced by LPS. This study reveals a two-way immunomodulatory effect of XG on inflammatory mediators in RAW264.7 macrophages that may involve the TLR4 signal pathway, providing a pharmacological basis for the use of XG in the control of inflammatory disorders. Copyright © 2017. Published by Elsevier Ltd.

  1. Optimization of calcium phosphate fine ceramic powders preparation

    NASA Astrophysics Data System (ADS)

    Sezanova, K.; Tepavitcharova, S.; Rabadjieva, D.; Gergulova, R.; Ilieva, R.

    2013-12-01

    The effect of biomimetic synthesis method, reaction medium and further precursor treatments on the chemical and phase composition, crystal size and morphology of calcium phosphates was examined. Nanosized calcium phosphate precursors were biomimetically precipitated by the method of continuous precipitation in three types of reaction media at pH 8: (i) SBF as an inorganic electrolyte system; (ii) organic (glycerine) modified SBF (volume ratio of 1:1); (iii) polymer (10 g/l xanthan gum or 10 g/l guar gum) modified SBF (volume ratio of 1:1). After maturation (24 h) the samples were lyophilized, calcinated at 300°C for 3 hours, and washed with water, followed by new gelation, lyophilization and step-wise (200, 400, 600, 800, and 1000°C, each for 3 hours) sintering. The reaction medium influenced the chemical composition and particle size but not the morphology of the calcium phosphate powders. In all studied cases bi-phase calcium phosphate fine powders with well-shaped spherical grains, consisting of β-tricalcium phosphate (β-TCP) and hydroxyapatite (HA) with a Ca/P ratio of 1.3 - 1.6 were obtained. The SBF modifiers decreased the particle size of the product in the sequence guar gum ˜ xanthan gum < glycerin < SBF medium.

  2. Effects of guar meal by-product with and without beta-mannanase Hemicell on broiler performance.

    PubMed

    Lee, J T; Connor-Appleton, S; Bailey, C A; Cartwright, A L

    2005-08-01

    Guar gum production yields a high protein guar meal that can be subdivided into germ and hull fractions. Feeding high concentrations of guar meal reduces body weight and feed efficiency in chickens due to the presence of a residual guar gum. Two experiments determined the upper feeding levels of guar meal and the hull and germ fractions in broiler chickens. An industrial source beta-mannanase (Hemicell) also was fed in combination with guar meals. Experiment 1 utilized a 3 x 4 factorial design to feed broiler chickens diets containing guar germ, guar hull, or guar meal at 4 levels (2.5, 5.0, 7.5, and 10.0%) compared with a negative control diet. Results indicated that any of the 3 guar meals could be fed at a 2.5% dietary inclusion rate without adversely affecting broiler chicken growth to 6 wk of age. In experiment 2, a 4 x 2 factorial design consisting of the 3 by-products meals at 5% inclusion and soybean meal control with and without enzyme tested whether Hemicell could increase inclusion rates without decreasing broiler growth or feed consumption to 6 wk of age. Addition of Hemicell to feed had no effect on measures of growth in chickens fed the control diet. Hemicell significantly improved feed:gain ratio of diets containing 5% of each fraction of guar meal versus the untreated diets. Feed:gain ratio for the Hemicell-treated 5% germ fraction diet was improved to control diet levels. Results indicated that the upper feeding level of guar meal and germ and hull fraction of guar meal is 2.5%, and addition of beta-mannanase (Hemicell) increases the upper feeding level for the germ fraction to 5%.

  3. Enzymatic degradation of guar galactomannans: A rheological study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tayal, Akash; Khan, S.A.

    1995-12-01

    Aqueous gels of guar gum and its derivatives are widely used in hydraulic fracturing for enhancing oil or gas production. Subsequently, these gels need to be degraded and flushed out of the wells to provide passage for oil or gas flow. The use of thermostable enzymes to hydrolyze the guar gums offers a novel and viable approach to polymer degradation for this application. Most wells of commercial interest are at high temperatures and the use of enzymatic degradation can lead to a significant expansion in the use of hydraulic fracturing for oil and gas recovery. In this study, steady shearmore » measurements are used to determine the effect of several enzymes on polymer viscosity. The effect of various parameters such as enzyme type and concentration, temperature of hydrolysis and pH of the solutions on the extent and kinetics of polymer degradation are discussed.« less

  4. Effect of xanthan and locust bean gum synergistic interaction on characteristics of biodegradable edible film.

    PubMed

    Kurt, Abdullah; Toker, Omer Said; Tornuk, Fatih

    2017-09-01

    The present study was aimed to use different combinations of xanthan (XG) and locust bean gum (LBG) in the biodegradable edible film preparation by benefitting from their synergistic interactions for the first time. Concentrations of LBG, XG and glycerol of the optimized film sample were found to be 89.6%, 10.4% and 20%, respectively. At the optimum point the WVP, TS, E% and EM values of film were found 0.22gmmh -1 m 2 kPa, 86.97MPa, 33.34% and 177.25MPa, respectively. The optimized film was characterized for its physical, thermal and structural behavior. The scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and fourier transform infrared spectroscopy (FTIR) analyses exhibited miscibility and presence of interaction between polymers. In conclusion, XG and LBG interaction was used successfully to get biodegradable films and coatings with improved characteristics. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Formulation and in vitro evaluation of xanthan gum-based bilayered mucoadhesive buccal patches of zolmitriptan.

    PubMed

    Shiledar, Rewathi R; Tagalpallewar, Amol A; Kokare, Chandrakant R

    2014-01-30

    A novel bilayered mucoadhesive buccal patch of zolmitriptan was prepared using xanthan gum (XG) as mucoadhesive polymer. Hydroxypropyl methylcellulose E-15 was used as film-former and polyvinyl alcohol (PVA) was incorporated, to increase the tensile strength of the patches. To study the effect of independent variables viz. concentrations of XG and PVA, on various dependent variables like in vitro drug release, ex vivo mucoadhesive strength and swelling index, 3(2) factorial design was employed. In vitro drug release studies of optimized formulation showed initially, rapid drug release; 43.15% within 15 min, followed by sustained release profile over 5h. Incorporation of 4% dimethyl sulfoxide enhanced drug permeability by 3.29 folds, transported 29.10% of drug after 5h and showed no buccal mucosal damage after histopathological studies. In conclusion, XG can be used as a potential drug release modifier and mucoadhesive polymer for successful formulation of zolmitriptan buccal patches. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Stability of cardamom (Elettaria cardamomum) essential oil in microcapsules made of whey protein isolate, guar gum, and carrageenan.

    PubMed

    Mehyar, Ghadeer F; Al-Ismail, Khalid M; Al-Isamil, Khalid M; Al-Ghizzawi, Hana'a M; Holley, Richard A

    2014-10-01

    The effects of microencapsulating cardamom essential oil (CEO) in whey protein isolate (WPI) alone and combined with guar gum (GG) and carrageen (CG) on microencapsulation efficiency, oil chemical stability, and microcapsule structure were investigated. Freeze-dried microcapsules were prepared from emulsions containing (w/w): 15% and 30% WPI; 0.1% GG, and 0.2% CG as wall materials with CEO (at 10% of polymer concentration) as core material, and physical properties and chemical stability were compared. Bulk density of microcapsules was highest in WPI without GG or CG and in 30% WPI + GG microcapsules, and was more affected by moisture content (r = -0.6) than by mean particle diameter (d43 ; r = -0.2) and span (r = 0.1). Microcapsules containing only WPI had the highest entrapped oil (7.5%) and microencapsulation efficiency (98.5%). The concentrations of 1,8-cineole and d-limonene were used as indicators for microcapsule chemical stability since they were the main components of CEO. Microcapsules retained higher (P ≤ 0.05) concentrations of both components than non-microencapsulated CEO during 16 wk storage at 20 ºC, but higher loss of both components was noted at 35 ºC. Microencapsulated d-limonene was reduced faster than 1,8-cineole regardless of temperature. The 30% WPI and 30% WPI + GG microcapsules retained CEO best throughout storage at both storage temperatures. Scanning electron micrographs revealed that WPI microcapsules had smooth surfaces, were relatively homogenous and regular in shape, whereas GG and CG addition increased visual surface porosity and reduced shape regularity. It was concluded that the best formulation for encapsulating CEO was 30% WPI. Encapsulating cardamom essential oil in whey protein isolate alone or combined with guar gum produced dried powders that effectively retained and chemically stabilized CEO, and therefore enhanced its handling and storability. © 2014 Institute of Food Technologists®

  7. Impact of electrical conductivity on acid hydrolysis of guar gum under induced electric field.

    PubMed

    Li, Dandan; Zhang, Yao; Yang, Na; Jin, Zhengyu; Xu, Xueming

    2018-09-01

    This study aimed to improve induced electric field (IEF)-assisted hydrolysis of polysaccharide by controlling electrical conductivity. As the conductivity of reaction medium was increased, the energy efficiency of IEF was increased because of deceased impedance, as well as enhanced output voltage and temperature, thus the hydrolysis of guar gum (GG) was accelerated under IEF. Changes in weight-average molecular weight (Mw) suggested that IEF-assisted hydrolysis of GG could be described by the first-order kinetics 1/Mw ∝ kt, with the rate constant (k), varying directly with the medium conductivity. Although IEF-assisted hydrolysis largely disrupted the morphological structure of GG, it had no impact on the chemical structure. In comparison to native GG, the steady shear viscosity of hydrolyzed GG dramatically declined while the thermal stability slightly decreased. This study extended the knowledge of electrical conductivity upon IEF-assisted acid hydrolysis of GG and might contribute to a better utilization of IEF for polysaccharide modification. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. Effect of added ingredients on water status and physico-chemical properties of tomato sauce.

    PubMed

    Diantom, Agoura; Curti, Elena; Carini, Eleonora; Vittadini, Elena

    2017-12-01

    Different ingredients (guar, xanthan, carboxy methyl cellulose, locust bean gums, potato fiber, milk, potato and soy proteins) were added to tomato sauce to investigate their effect on its physico-chemical properties. The products were characterized in terms of colour, rheological properties (Bostwick consistency, flow behavior and consistency coefficient), water status (water activity, moisture content) and molecular mobility by 1 H Nuclear Magnetic Resonance (NMR). Water activity was significantly decreased only by the addition of potato fiber. Xanthan, locust bean, guar and carboxy methyl cellulose significantly enhanced Bostwick consistency and consistency coefficient. Type of ingredient and concentration significantly affected 1 H NMR mobility indicators. Principal component analysis (PCA) indicated that only 1 H NMR mobility parameters were able to differentiate the effect of milk protein, xanthan and potato fiber on tomato sauce properties. The information collected in this work provides information to intelligently modulate tomato sauce attributes and tailor its properties for specific applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Role of guar fiber in appetite control.

    PubMed

    Rao, Theertham Pradyumna

    2016-10-01

    Appetite control and reduction of additional calorie intake may be a logical approach for proper weight management. Viscous dietary fibers are effective in appetite control but difficult to apply in normal serving sizes in foods and nutritional supplements due to their viscosity and required high doses. Guar fiber popularly known as partially hydrolyzed guar gum (PHGG) is near non-viscous soluble fiber that has been proven effective in providing many physiological benefits. Guar fiber has also been identified as potential natural food and nutritional supplement ingredient for appetite control. The aim of this review is to summarize all the clinical studies pertinent to its effects on appetite control in normal subjects and postulate the mechanism of action. Guar fiber exhibited appetite control via delaying the colonic transit time of digested food, stimulation of satiety hormone cholecystokinin (CCK) and induction of prolonged perception of post-meal satiation and satiety effects. Regular intake of guar fiber at a dose of 2g/serving provided significant sustained post-meal satiation effects and minimized the inter-meal calorie intake by about 20% in normal subjects. The intake of guar fiber alone at a dose >5g/serving or its combination with protein (2.6g guar fiber+8g protein/serving) showed acute satiety effects in normal subjects. Guar fiber containing >85% dietary fiber, with clear solubility and negligible taste impact, may be an ideal natural dietary fiber for use in food and supplement applications at low dosage levels for appetite control. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. Time-dependent rheological behavior of natural polysaccharide xanthan gum solutions in interrupted shear and step-incremental/reductional shear flow fields

    NASA Astrophysics Data System (ADS)

    Lee, Ji-Seok; Song, Ki-Won

    2015-11-01

    The objective of the present study is to systematically elucidate the time-dependent rheological behavior of concentrated xanthan gum systems in complicated step-shear flow fields. Using a strain-controlled rheometer (ARES), step-shear flow behaviors of a concentrated xanthan gum model solution have been experimentally investigated in interrupted shear flow fields with a various combination of different shear rates, shearing times and rest times, and step-incremental and step-reductional shear flow fields with various shearing times. The main findings obtained from this study are summarized as follows. (i) In interrupted shear flow fields, the shear stress is sharply increased until reaching the maximum stress at an initial stage of shearing times, and then a stress decay towards a steady state is observed as the shearing time is increased in both start-up shear flow fields. The shear stress is suddenly decreased immediately after the imposed shear rate is stopped, and then slowly decayed during the period of a rest time. (ii) As an increase in rest time, the difference in the maximum stress values between the two start-up shear flow fields is decreased whereas the shearing time exerts a slight influence on this behavior. (iii) In step-incremental shear flow fields, after passing through the maximum stress, structural destruction causes a stress decay behavior towards a steady state as an increase in shearing time in each step shear flow region. The time needed to reach the maximum stress value is shortened as an increase in step-increased shear rate. (iv) In step-reductional shear flow fields, after passing through the minimum stress, structural recovery induces a stress growth behavior towards an equilibrium state as an increase in shearing time in each step shear flow region. The time needed to reach the minimum stress value is lengthened as a decrease in step-decreased shear rate.

  11. Functional vegetable guar (Cyamopsis tetragonoloba L. Taub.) accessions for improving flavonoid concentrations in immature pods

    USDA-ARS?s Scientific Manuscript database

    Dry guar (Cyamopsis tetragonoloba L. Taub) seed are primarily used to extract galactomannan gum for oil fracking, however the immature pods are used as a vegetable in India and sold in ethnic grocery stores in the Atlanta, GA area. Twenty-two guar genotypes were grown in the field at Griffin, GA, US...

  12. Formulation and Evaluation of Fixed-Dose Combination of Bilayer Gastroretentive Matrix Tablet Containing Atorvastatin as Fast-Release and Atenolol as Sustained-Release

    PubMed Central

    Dey, Sanjay; Chattopadhyay, Sankha; Mazumder, Bhaskar

    2014-01-01

    The objective of the present study was to develop bilayer tablets of atorvastatin and atenolol that are characterized by initial fast-release of atorvastatin in the stomach and comply with the release requirements of sustained-release of atenolol. An amorphous, solvent evaporation inclusion complex of atorvastatin with β-cyclodextrin, present in 1 : 3 (drug/cyclodextrin) molar ratio, was employed in the fast-release layer to enhance the dissolution of atorvastatin. Xanthan gum and guar gum were integrated in the sustained-release layer. Bilayer tablets composed of sustained-release layer (10% w/w of xanthan gum and guar gum) and fast-release layer [1 : 3 (drug/cyclodextrin)] showed the desired release profile. The atorvastatin contained in the fast-release layer showed an initial fast-release of more than 60% of its drug content within 2 h, followed by sustained release of the atenolol for a period of 12 h. The pharmacokinetic study illustrated that the fast absorption and increased oral bioavailability of atorvastatin as well as therapeutic concentration of atenolol in blood were made available through adoption of formulation strategy of bilayer tablets. It can be concluded that the bilayer tablets of atorvastatin and atenolol can be successfully employed for the treatment of hypertension and hypercholesterolemia together through oral administration of single tablet. PMID:24527446

  13. Micronised bran-enriched fresh egg tagliatelle: Significance of gums addition on pasta technological features.

    PubMed

    Martín-Esparza, M E; Raga, A; González-Martínez, C; Albors, A

    2018-06-01

    The aim of the work was to produce fibre-enriched fresh pasta based on micronised wheat bran and durum wheat semolina with appropriate techno-functional properties. Wheat semolina was replaced with fine particle size (50% below 75 µm) wheat bran - up to 11.54% (w/w). A Box-Behnken design with randomised response surface methodology was used to determine a suitable combination of carboxymethylcellulose, xanthan gum and locust bean gum to improve pasta attributes: minimum cooking loss, maximum values for water gain and swelling index, as well as better colour and texture characteristics before and after cooking. The proximate chemical composition of wheat semolina and bran was determined and the microstructure of uncooked pasta was observed as well. From the response surface methodology analysis, it is recommended to use: (i) xanthan gum over 0.6% w/w as it led to bran-enriched pasta with a better developed structure and superior cooking behaviour, (ii) a combination of xanthan gum (0.8% w/w) and carboxymethylcellulose (over 0.6% w/w) to enhance uncooked pasta yellowness.

  14. Analysis of cDNA libraries from developing seeds of guar (Cyamopsis tetragonoloba (L.) Taub)

    PubMed Central

    Naoumkina, Marina; Torres-Jerez, Ivone; Allen, Stacy; He, Ji; Zhao, Patrick X; Dixon, Richard A; May, Gregory D

    2007-01-01

    Background Guar, Cyamopsis tetragonoloba (L.) Taub, is a member of the Leguminosae (Fabaceae) family and is economically the most important of the four species in the genus. The endosperm of guar seed is a rich source of mucilage or gum, which forms a viscous gel in cold water, and is used as an emulsifier, thickener and stabilizer in a wide range of foods and industrial applications. Guar gum is a galactomannan, consisting of a linear (1→4)-β-linked D-mannan backbone with single-unit, (1→6)-linked, α-D-galactopyranosyl side chains. To better understand regulation of guar seed development and galactomannan metabolism we created cDNA libraries and a resulting EST dataset from different developmental stages of guar seeds. Results A database of 16,476 guar seed ESTs was constructed, with 8,163 and 8,313 ESTs derived from cDNA libraries I and II, respectively. Library I was constructed from seeds at an early developmental stage (15–25 days after flowering, DAF), and library II from seeds at 30–40 DAF. Quite different sets of genes were represented in these two libraries. Approximately 27% of the clones were not similar to known sequences, suggesting that these ESTs represent novel genes or may represent non-coding RNA. The high flux of energy into carbohydrate and storage protein synthesis in guar seeds was reflected by a high representation of genes annotated as involved in signal transduction, carbohydrate metabolism, chaperone and proteolytic processes, and translation and ribosome structure. Guar unigenes involved in galactomannan metabolism were identified. Among the seed storage proteins, the most abundant contig represented a conglutin accounting for 3.7% of the total ESTs from both libraries. Conclusion The present EST collection and its annotation provide a resource for understanding guar seed biology and galactomannan metabolism. PMID:18034910

  15. Silver nanoparticles-containing dual-function hydrogels based on a guar gum-sodium borohydride system

    PubMed Central

    Dai, Lei; Nadeau, Ben; An, Xingye; Cheng, Dong; Long, Zhu; Ni, Yonghao

    2016-01-01

    Dual-function hydrogels, possessing both stimuli-responsive and self-healing properties, have recently attracted attention of both chemists and materials scientists. Here we report a new paradigm using natural polymer (guar gum, GG) and sodium borohydride (NaBH4), for the preparation of silver nanoparticles (AgNPs)-containing smart hydrogels in a simple, fast and economical way. NaBH4 performs as a reducing agent for AgNPs synthesis using silver nitrate (AgNO3) as the precursor. Meanwhile, sodium metaborate (NaBO2) (from NaBH4) behaves as a cross-linking agent between GG molecular chains. The AgNPs/GG hydrogels with excellent viscoelastic properties can be obtained within 3 min at room temperature without the addition of other cross-linkers. The resultant AgNPs/GG hydrogels are flowable and injectable, and they possess excellent pH/thermal responsive properties. Additionally, they exhibit rapid self-healing capacity. This work introduces a facile and scale-up way to prepare a class of hydrogels that can have great potential to biomedical and other industrial applications. PMID:27819289

  16. Characterization of the mannan synthase promoter from guar (Cyamopsis tetragonoloba)

    USDA-ARS?s Scientific Manuscript database

    Guar seed gum, consisting primarily of a high molecular weight galactomannan, is the most cost effective natural thickener, having broad applications in the food, cosmetics, paper, pharmaceutical and petroleum industries. The properties of the polymer can potentially be enhanced by genetic modificat...

  17. Changes in electrical energy requirements to operate an ice cream freezer as a function of sweeteners and gums

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Smith, D.E.; Bakshi, A.S.; Gay, S.A.

    1985-01-01

    Changes in electrical energy required to operate a continuous freezer were monitored for various ice cream formulae. Ice cream formulae consisted of nine different combinations of sucrose, 36 DE corn syrup, and 42 high fructose corn syrup as well as two ratios of guar gum to locust bean gum. Within the same sweetening system, a mix high in locust bean gum tended to have a lower energy demand than mix with large amounts of guar gum. This was especially pronounced in mixes with 50% 42 high fructose corn syrup and/or 50% 36 DE corn syrup solids.

  18. Synthesis and characterization of guar-alginate hybrid bead templated mercury sorbing titania spheres.

    PubMed

    Singh, Vandana; Preeti; Singh, Angela; Singh, Devendra; Singh, Yadveer; Pandey, Arvind Kumar

    2015-01-01

    Present communication reports on the synthesis and characterization of Hg(II) sorbing millimeter sized porous titania spheres (TSP). The synthesis utilizes guar gum-alginate hybrid beads as sacrificial template to polymerize titanium(IV) isopropoxide. The hybrid beads are crafted by pouring guar-alginate mixed solution to calcium bath. The mechanical strength of the beads depended on guar to alginate ratio in the mixed solution. The equal weight ratio of the two polysaccharides is appropriate for adequate mechanical strength beads. The unique performance of the templating beads is attributed to the synergistic interaction between guar gum and sodium alginate. FTIR, BET, SEM, TEM, XRD, TGA, and DTG analyses have been used for the characterization of the optimum performance TSP (TSPAG2). TSPAG2 is a mesoporous material that has higher surface area and narrower pore size distribution than pure alginate derived titania spheres (TSPA). TEM study demonstrated that TSPAG2 spheres are constituted of aggregated TiO2 nanoparticles of ∼ 10 nm size. TSPAG2 is able to capture >95% Hg(II) from synthetic Hg(II) solution in 10h at pH 5 as opposed to only 68% removal by TSPA. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. The effect of guar gum and fiber-enriched wheat bran on gastric emptying of a semisolid meal in healthy subjects.

    PubMed

    Rydning, A; Berstad, A; Berstad, T; Hertzenberg, L

    1985-04-01

    The effect of physiological doses of guar gum (Guarem), 5 g, and fiber-enriched wheat bran (Fiberform), 10.5 g, on gastric emptying was studied by two different methods in healthy subjects: by a simple isotope localization monitor placed over the upper part of the abdomen and by gamma camera. The fiber preparations were added to a semisolid meal consisting of wheatmeal porridge and juice, using technetium-99 DTPA as a marker. The gamma camera showed no effect of fiber on gastric emptying. The isotope localization monitor, however, indicated that Fiberform prevented a postprandial accumulation of the meal within the upper part of the stomach. The simple isotope localization monitor cannot be recommended for measurements of gastric emptying.

  20. Cost-effective endo-mannanase from Bacillus sp. CFR1601 and its application in generation of oligosaccharides from guar gum and as detergent additive.

    PubMed

    Srivastava, Praveen Kumar; Kapoor, Mukesh

    2014-01-01

    The indigenous bacteria Bacillus sp. CFR1601 produced significant levels of endo-mannanase when grown on agro-wastes, namely, green gram husk and sunflower oil cake (25.6 IU/mL), used as sole carbon and nitrogen sources, respectively. Under immobilized cell system, synthetic supports (polyurethane foam, scotch brite, polyester; up to 33.2 IU/mL) were found marginally superior as compared to natural supports (cotton and silk; up to 28.2 IU/mL) for endo-mannanase production. Cooperative interactions between L-lysine HCl (0.3% w/v), Tween 60 (0.3% v/v), and sunflower oil cake (3.0% w/v) in central composite design response surface methodology ameliorated (1.61-fold) endo-mannanase titers to 48.0 IU/mL. Partially purified endo-mannanase was tested for its ability to produce oligosaccharides from guar gum. These oligosaccharides were tested in vitro for their ability to promote growth of Lactobacillus plantarum MTCC 5422 and Lactobacillus salivarius CHS 1E. Results indicated that low-molecular-weight degraded products from guar gum were (1) able to support the growth of tested strains [increased O.D600nm up to 2.3-fold and decrease in pH (<6.3) due to production of short chain fatty acid (SCFA)] when used as sole carbon source; and (2) after purification and analysis by electron spray ionization-mass spectrometry (ESI-MS) were found to be composed of mainly disaccharide and tetrasaccharide. The compatibility of endo-mannanase with various detergents together with wash performance test confirmed its potential applicability for laundry industry.

  1. Design and development of guar gum based novel, superabsorbent and moisture retaining hydrogels for agricultural applications.

    PubMed

    Thombare, Nandkishore; Mishra, Sumit; Siddiqui, M Z; Jha, Usha; Singh, Deodhari; Mahajan, Gopal R

    2018-04-01

    The novel hydrogels were synthesized by grafting guar gum with acrylic acid and cross-linking with ethylene glycol di methacrylic acid (EGDMA). The synthesis of hydrogel was confirmed by characterization through 13 C NMR, FTIR spectroscopy, SEM micrography, thermo-gravimetric analysis and water absorption studies under different solutions. Synthesized hydrogel (GG-AA-EGDMA) was confirmed to be biodegradable with half-life period of 77 days through soil burial biodegradation studies. The effects of hydrogel treatment on soil were evaluated by studying various physico-chemical properties of soil like bulk density, porosity, water absorption and retention capacity etc. The hydrogel which could absorb up to 800 ml water per gram, after addition to soil, improved its porosity, moisture absorption and retention capacity significantly. Water holding capacity of water increased up to 54% of its original and porosity also increased up to 9% of its original. The synthesized hydrogel revealed tremendous potential as soil conditioning material for agricultural applications. Copyright © 2018 Elsevier Ltd. All rights reserved.

  2. Xanthan production on polyurethane foam and its enhancement by air pressure pulsation.

    PubMed

    Zhang, Zhi-guo; Chen, Hong-zhang

    2010-12-01

    In this study, we evaluated the feasibility of solid-state fermentation (SSF) on polyurethane foam (PUF) for xanthan production. The effects of air pressure pulsation (APP) on biomass accumulation and final xanthan concentration were also studied. Under suitable conditions (15% inoculum, 0.5-cm (side length) PUF cubes, 15 mL medium per gram cubes and 4.5 cm bed depth), the broth was dispersed on the PUF as a film. When the initial glucose concentration in the media was low (20 and 40 g L⁻¹), there was no significant difference between the final xanthan concentration in static SSF and submerged fermentation (SMF). When high initial glucose concentrations (60 and 80 g L⁻¹) were used, the final gum concentrations in SSF were much higher than those in SMF. When the APP technique was applied in xanthan production with a medium containing a high glucose concentration (80 g L⁻¹), the oxygen consumption rate of Xanthomonas campestris was significantly enhanced at the later stages of fermentation, and both the biomass and xanthan concentration were improved. The results indicated that SSF on PUF is suitable for xanthan preparation, especially when the initial glucose concentration ranged from 60 to 80 g L⁻¹. Those results also demonstrated that APP technology can be used to enhance xanthan yields.

  3. Rheological Behavior Xanthan and SlurryPro Polymer Solutions Evaluated as Shear Thinning Delivery Fluids for Subsurface Remediation

    NASA Astrophysics Data System (ADS)

    Zhong, L.; Oostrom, M.; Truex, M.; Vermeul, V.

    2011-12-01

    Shear thinning fluids can be applied as a delivery means to enhance the uniformity of remedial amendment distribution in heterogeneous aquifers, thereby to improve remediation performance. The rheological behavior of biopolymer xanthan gum and synthetic polymer SlurryPro were tested, and their influence on the amendment delivery performance was evaluated. The impact of polymer concentration, basic water chemistry, salinity (e.g., Br-, Na+, Ca2+ concentrations), remedial amendments (phosphate, sodium lactate, ethyl lactate, lactate oil, whey), sediments, and the mixing approach on the rheological properties of the polymer solutions was determined. The SlurryPro polymer lost shear-thinning properties even at relatively low solution ionic strength. However, the xanthan gum polymer maintained shear-thinning properties under most of the tested conditions, though with some loss in absolute viscosity with increasing ionic strength. Xanthan appeared to be the better candidate for enhanced amendment delivery. Increasing in xanthan concentration not only increased the solution viscosity, but also increased degree of shear thinning. Addition of salt decreased the solution viscosity and the degree of shear thinning, while the influence was diminished when the polymer concentration was higher. After reaching a critical xanthan concentration, addition of salt increased solution viscosity. The degradation of xanthan and SlurryPro in the presence of site aquifer materials and microbes was studied in batch tests in which the field sediment/water ratio was simulated. The viscosity of the polymer solutions dropped 85% or more in the first week, while the solution chemical oxygen demand (COD) decreasing occurred at a much slower rate.

  4. Pore blocking: An innovative formulation strategy for the design of alcohol resistant multi-particulate dosage forms.

    PubMed

    Schrank, Simone; Jedinger, Nicole; Wu, Shengqian; Piller, Michael; Roblegg, Eva

    2016-07-25

    In this work calcium stearate (CaSt) multi-particulates loaded with codeine phosphate (COP) were developed in an attempt to provide extended release (ER) combined with alcohol dose dumping (ADD) resistance. The pellets were prepared via wet/extrusion spheronization and ER characteristics were obtained after fluid bed drying at 30°C. Pore blockers (i.e., xanthan, guar gum and TiO2) were integrated to control the uptake of ethanolic media, the CaSt swelling and consequently, the COP release. While all three pore blockers are insoluble in ethanol, xanthan dissolves, guar gum swells and TiO2 does not interact with water. The incorporation of 10 and 15% TiO2 still provided ER characteristics and yielded ADD resistance in up to 40v% ethanol. The in-vitro data were subjected to PK simulations, which revealed similar codeine plasma levels when the medication is used concomitantly with alcoholic beverages. Taken together the in-vitro and in-silico results demonstrate that the incorporation of appropriate pore blockers presents a promising strategy to provide ADD resistance of multi-particulate systems. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. 21 CFR 172.695 - Xanthan gum.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... polysaccharide gum derived from Xanthomonas campestris by a pure-culture fermentation process and purified by... 1.0 gram of the powdered polysaccharide to be tested. Add the blend slowly (approximately 1/2 minute... polysaccharide to be tested in 200 milliliters of distilled water previously heated to 80 °C (omit the locust...

  6. 21 CFR 172.695 - Xanthan gum.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... polysaccharide gum derived from Xanthomonas campestris by a pure-culture fermentation process and purified by... 1.0 gram of the powdered polysaccharide to be tested. Add the blend slowly (approximately 1/2 minute... polysaccharide to be tested in 200 milliliters of distilled water previously heated to 80 °C (omit the locust...

  7. 21 CFR 172.695 - Xanthan gum.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... polysaccharide gum derived from Xanthomonas campestris by a pure-culture fermentation process and purified by... 1.0 gram of the powdered polysaccharide to be tested. Add the blend slowly (approximately 1/2 minute... polysaccharide to be tested in 200 milliliters of distilled water previously heated to 80 °C (omit the locust...

  8. 21 CFR 172.695 - Xanthan gum.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... following prescribed conditions: (a) The additive is a polysaccharide gum derived from Xanthomonas... polysaccharide to be tested. Add the blend slowly (approximately 1/2 minute) at the point of maximum agitation to.... In the event that a gel is obtained, make up a 1 percent solution of the polysaccharide to be tested...

  9. 21 CFR 172.695 - Xanthan gum.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... polysaccharide gum derived from Xanthomonas campestris by a pure-culture fermentation process and purified by... 1.0 gram of the powdered polysaccharide to be tested. Add the blend slowly (approximately 1/2 minute... polysaccharide to be tested in 200 milliliters of distilled water previously heated to 80 °C (omit the locust...

  10. Rapid, facile microwave-assisted synthesis of xanthan gum grafted polyaniline for chemical sensor.

    PubMed

    Pandey, Sadanand; Ramontja, James

    2016-08-01

    Grafting method, through microwave radiation procedure is extremely productive in terms of time consumption, cost effectiveness and environmental friendliness. In this study, conductive and thermally stable composite (mwXG-g-PANi) was synthesized by grafting of aniline (ANi) on to xanthan gum (XG) using catalytic weight of initiator, ammonium peroxydisulfate in the process of microwave irradiation in an aqueous medium. The synthesis of mwXG-g-PANi were confirm by FTIR, XRD, TGA, and SEM. The influence of altering the microwave power, exposure time of microwave, concentration of monomer and the amount of initiator of graft polymerization were studied over the grafting parameters, for example, grafting percentage (%G) and grafting efficiency (%E). The maximum %G and %E achieved was 172 and 74.13 respectively. The outcome demonstrates that the microwave irradiation strategy can increase the reaction rate by 72 times over the conventional method. Electrical conductivity of XG and mwXG-g-PANi composite film was performed. The fabricated grafted sample film were then examined for the chemical sensor. The mwXG-g-PANi, effectively integrated and handled, are NH3 sensitive and exhibit a rapid sensing in presence of NH3 vapor. Chemiresistive NH3 sensors with superior room temperature sensing performance were produced with sensor response of 905 at 1ppb and 90% recovery within few second. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. In-vitro and In-vivo Pharmacokinetic Evaluation of Guar Gum-Eudragit® S100 Based Colon-targeted Spheroids of Sulfasalazine Co-administered with Probiotics.

    PubMed

    Sharma, Abhinav; Kumar, Bimlesh; Singh, Sachin Kumar; Gulati, Monica; Vaidya, Yogyata; Rathee, Harish; Ghai, Deepak; Malik, Adil Hussain; Yadav, Ankit Kumar; Maharshi, Peddi; Bawa, Palak; Rajesh, Sarvi Yadav; Sharma, Parth; Pandey, Narendra Kumar; Mohanta, Souvik

    2018-01-01

    Polysaccharide based delivery systems have been successfully used to target drugs to colon. In some recent reports, the superiority of concomitant administration of probiotics with such systems has been established. However, the pharmacokinetics of such symbiotic therapy remain unexplored hitherto. This study deciphers the pharmacokinetic parameters of guar gum based colon targeted spheroids of sulfasalazine with co-administration of probiotics in experimental rats. Thirty rats were divided into five groups using Latin square design. These were subjected to treatment with delayed release formulation, uncoated spheroids, coated spheroid and coated spheroids along with probiotics. In case of delayed release formulation, negligible presence of sulfasalazine in plasma was observed in first 2h, followed by significant increase in sulfasalazine concentration after 3h. Higher plasma concentrations of sulfasalazine were detected for uncoated spheroids with and without probiotics. Negligible release of drug upto 5h and delayed Tmax in case of guar-gum coated sulfasalazine spheroids with or without probiotics clearly indicated successful formulation of colon targeted spheroids. Further, for coated spheroids (both with and without probiotics), the value of Tmax is found to be significantly higher than those with the other treatments. Colon targeted spheroids were therefore, found to reduce absorption of drug which, in turn, is expected to reduce the side effects as only local action in colon is required for treatment of colitis. This is the first report on pharmacokinetic study of a colon targeted delivery system co-administered with probiotics. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  12. Natural gum-type biopolymers as potential modified nonpolar drug release systems.

    PubMed

    Salamanca, Constain H; Yarce, Cristhian J; Moreno, Roger A; Prieto, Vanessa; Recalde, Juanita

    2018-06-01

    In this work, the relationship between surface properties and drug release mechanism from binary composition tablets formed by quetiapine fumarate and biopolymer materials was studied. The biopolymers correspond to xanthan and tragacanth gums, which are projected as modified drug release systems. The surface studies were carried out by the sessile drop method, while the surface free energy (SFE) was determinate through Young-Dupree and OWRK semi-empirical models. On the other hand, the drug release studies were performed by in vitro dissolution tests, where the data were analyzed through kinetic models of zero order, first order, Higuchi, and Korsmeyer-Peppas. The results showed that depending on the type and the proportion of biopolymer, surface properties, and the drug release processes are significantly affected, wherein tragacanth gum present a usual erosion mechanism, while xanthan gum describes a swelling mechanism that controls the release of the drug. Copyright © 2018 Elsevier Ltd. All rights reserved.

  13. The enhanced stability and biodegradation of dispersed crude oil droplets by Xanthan Gum as an additive of chemical dispersant.

    PubMed

    Wang, Aiqin; Li, Yiming; Yang, Xiaolong; Bao, Mutai; Cheng, Hua

    2017-05-15

    It is necessary for chemical dispersant to disperse oil effectively and maintain the stability of oil droplets. In this work, Xanthan Gum (XG) was used as an environmentally friendly additive in oil dispersant formulation to enhance the stability and biodegradation of dispersed crude oil droplets. When XG was used together with chemical dispersant 9500A, the dispersion effectiveness of crude oil in artificial sea water (ASW) and the oil droplet stability were both greatly enhanced. In the presence of XG, lower concentration of 9500A was needed to achieve the effective dispersion and stabilization. In addition to the enhancement of dispersion and stabilization, it was found that the biodegradation rate of crude oil by bacteria was dramatically enhanced when a mixture of 9500A and XG was used as a dispersant. Because of the low environmental impact of XG, this would be a potential way to formulate the dispersant with lower toxicity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Influence of Compositional Variations on Floc Size and Strength

    NASA Astrophysics Data System (ADS)

    Yin, H.; Tan, X.; Reed, A. H.; Furukawa, Y.; Zhang, G.

    2010-12-01

    Clay-biopolymer micro aggregates or flocs are abundant in waters, including rivers, lakes, and oceans. Owing to their small size and charged surfaces, fine-grained inorganic sediment particles, mainly clays, interact actively with organic substances, such as organic matter and biogenic polymers, to form aggregates or flocs, typically in the size of 10-1000 μm. The flocs in ocean waters are also termed “marine snow”. These flocs are typically porous, tenuous, and soft in nature. During transport in suspension, they may breakdown and decrease in size if the turbulent shear stress exceeds their strength. They may also collide and form larger ones if the shear stress is relatively small. Since flocs of different size and structure settle at different velocities, understanding their strength is also of essential importance for sediment hydrodynamics, transport, and management. Our study focuses on investigating the influence of compositional variations on floc size and strength so that a better understanding of floc dynamics can be achieved. A laser diffraction-based Cilas® particle size and shape analyzer with controllable fluid circulation velocity was employed to conduct floc size measurements and shape imaging, the latter achieved by a high resolution inverted optical microscope, which is also installed with the size analyzer. Totally two clay minerals, kaolinite and illite, were tested as the model inorganic solid skeleton minerals for floc formation, and two biopolymers, anionic xanthan gum and neutral guar gum, were chosen as analogs of naturally occurring organic matter or biopolymers to simulate clay-biopolymer floc formation. Moreover, the concentration of both organic and inorganic phases was varied. The floc breakage or tensile strength was indirectly estimated by the varied fluid flow velocity in the particle size analyzer’s circulation system. For each individual composition, stable flocs were formed by three different fluid circulating velocities

  15. Industrial yogurt manufacture: monitoring of fermentation process and improvement of final product quality.

    PubMed

    Soukoulis, C; Panagiotidis, P; Koureli, R; Tzia, C

    2007-06-01

    Lactic acid fermentation during the production of skim milk and whole fat set-style yogurt was continuously monitored by measuring pH. The modified Gompertz model was successfully applied to describe the pH decline and viscosity development during the fermentation process. The viscosity and incubation time data were also fitted to linear models against ln(pH). The investigation of the yogurt quality improvement practices included 2 different heat treatments (80 degrees C for 30 min and 95 degrees C for 10 min), 3 milk protein fortifying agents (skim milk powder, whey powder, and milk protein concentrate) added at 2.0%, and 4 hydrocolloids (kappa-carrageenan, xanthan, guar gum, and pectin) added at 0.01% to whole fat and skim yogurts. Heat treatment significantly affected viscosity and acetaldehyde development without influencing incubation time and acidity. The addition of whey powder shortened the incubation time but had a detrimental effect on consistency, firmness, and overall acceptance of yogurts. On the other hand, addition of skim milk powder improved the textural quality and decreased the vulnerability of yogurts to syneresis. Anionic stabilizers (kappa-carrageenan and pectin) had a poor effect on the texture and palatability of yogurts. However, neutral gums (xanthan and guar gum) improved texture and prevented the wheying-off defect. Skim milk yogurts exhibited longer incubation times and higher viscosities, whereas they were rated higher during sensory evaluation than whole fat yogurts.

  16. Drug release and swelling kinetics of directly compressed glipizide sustained-release matrices: establishment of level A IVIVC.

    PubMed

    Sankalia, Jolly M; Sankalia, Mayur G; Mashru, Rajashree C

    2008-07-02

    The purpose of this study was to examine a level A in vitro-in vivo correlation (IVIVC) for glipizide hydrophilic sustained-release matrices, with an acceptable internal predictability, in the presence of a range of formulation/manufacturing changes. The effect of polymeric blends of ethylcellulose, microcrystalline cellulose, hydroxypropylmethylcellulose, xanthan gum, guar gum, Starch 1500, and lactose on in vitro release profiles was studied and fitted to various release kinetics models. Water uptake kinetics with scanning electron microscopy (SEM) was carried out to support the drug release mechanism. An IVIVC was established by comparing the pharmacokinetic parameters of optimized (M-24) and marketed (Glytop-2.5 SR) formulations after single oral dose studies on white albino rabbits. The matrix M-19 (xanthan:MCC PH301 at 70:40) and M-24 (xanthan:HPMC K4M:Starch 1500 at 70:25:15) showed the glipizide release within the predetermined constraints at all time points with Korsmeyer-Peppas' and zero-order release mechanism, respectively. Kopcha model revealed that the xanthan gum is the major excipient responsible for the diffusional release profile and was further supported by SEM and swelling studies. A significant level A IVIVC with acceptable limits of prediction errors (below 15%) enables the prediction of in vivo performance from their in vitro release profile. It was concluded that proper selection of rate-controlling polymers with release rate modifier excipients will determine overall release profile, duration and mechanism from directly compressed matrices.

  17. Nonlinear Propagation of Sound in Recently Settled Flocculated Sediments

    NASA Astrophysics Data System (ADS)

    Reed, A. H.; Sanders, W. M.

    2016-12-01

    Cohesive sediments undergo changes in a whirlwind. Dumped out of the river and into the estuary, they get bathed in salty water and subject to turbulent motion. During this sequence of events, the clay particles form clay aggregates of larger size with higher settling rates than the clay particles. Once the flocs have settled, cohesive sediments may form a sediment deposit of mud. Our interest is in the factors that control the development of soundspeed within these muds. This paper addresses organic matter influences on floc aggregation and settling rates. In laboratory studies, organic matter type differed in mixtures with either bentonite or kaolinite clays. The organic matter types used were guar gum, a net positive biopolymer, and xanthan gum, a net negative biopolymer derived from bacterial exudates, similar to those commonly found in estuaries. These biopolymers were dissolved into low salinity water (0-10 ppt). The biopolymer mixture was degassed and during the degassing process, either bentonite or kaolinite clay was added to the vessel. Surprisingly, different settling rates occurred in the clay-biopolymer mixtures. The settling rates of the clay-guar mixtures was more rapid (1-2 days) than the settling rate for the clay-xanthan mixtures. While clay-guar consolidated further, clay-xanthan maintained consistency for more than 2 weeks with density slowly increasing during that period. Compressional soundspeed (Vp) measurements were made with depth through the vessel using 0.5 mHz piezoelectric transducers. It was found that Vp in water was similar to that of the clay-xanthan. Vp was the same in the upper 6 cm of mud as it was in the overlying water and Vp decreased to become slower with increasing depth. Compressional wave velocity (Vp) also changed slightly with the guar complexes below the sediment water interface to the depth of the vessel. Vp was slightly slower in the mud than in the water column. Vp of the water was 1480-1495 m/s whereas Vp within the

  18. Concentration Regimes of Biopolymers Xanthan, Tara, and Clairana, Comparing Dynamic Light Scattering and Distribution of Relaxation Time

    PubMed Central

    Oliveira, Patrícia D.; Michel, Ricardo C.; McBride, Alan J. A.; Moreira, Angelita S.; Lomba, Rosana F. T.; Vendruscolo, Claire T.

    2013-01-01

    The aim of this work was to evaluate the utilization of analysis of the distribution of relaxation time (DRT) using a dynamic light back-scattering technique as alternative method for the determination of the concentration regimes in aqueous solutions of biopolymers (xanthan, clairana and tara gums) by an analysis of the overlap (c*) and aggregation (c**) concentrations. The diffusion coefficients were obtained over a range of concentrations for each biopolymer using two methods. The first method analysed the behaviour of the diffusion coefficient as a function of the concentration of the gum solution. This method is based on the analysis of the diffusion coefficient versus the concentration curve. Using the slope of the curves, it was possible to determine the c* and c** for xanthan and tara gum. However, it was not possible to determine the concentration regimes for clairana using this method. The second method was based on an analysis of the DRTs, which showed different numbers of relaxation modes. It was observed that the concentrations at which the number of modes changed corresponded to the c* and c**. Thus, the DRT technique provided an alternative method for the determination of the critical concentrations of biopolymers. PMID:23671627

  19. Mechanism insights into enhanced trichloroethylene removal using xanthan gum-modified microscale zero-valent iron particles.

    PubMed

    Xin, Jia; Han, Jun; Zheng, Xilai; Shao, Haibing; Kolditz, Olaf

    2015-03-01

    This report focuses on the enhancement in trichloroethylene (TCE) removal from contaminated groundwater using xanthan gum (XG)-modified, microscale, zero-valent iron (mZVI). Compared with bare mZVI, XG-coated mZVI increased the TCE removal efficiency by 30.37% over a 480-h experimental period. Because the TCE removal is attributed to both sorption and reduction processes, the contributions from sorption and reduction were separately investigated to determine the mechanism of XG on TCE removal using mZVI. The results showed that the TCE sorption capacity of mZVI was lower in the presence of XG, whereas the TCE reduction capacity was significantly increased. The FTIR spectra confirmed that XG, which is rich in hydrophilic functional groups, was adsorbed onto the iron surface through intermolecular hydrogen bonds, which competitively repelled the sorption and mass transfer of TCE toward reactive sites. The variations in the pH, Eh, and Fe(2+) concentration as functions of the reaction time were recorded and indicated that XG buffered the solution pH, inhibited surface passivation, and promoted TCE reduction by mZVI. Overall, the XG-modified mZVI was considered to be potentially effective for the in-situ remediation of TCE contaminated groundwater due to its high stability and dechlorination reactivity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Partially hydrolyzed guar gum in pediatric functional abdominal pain.

    PubMed

    Romano, Claudio; Comito, Donatella; Famiani, Annalisa; Calamarà, Sabrina; Loddo, Italia

    2013-01-14

    To assess the effects of partially hydrolyzed guar gum (PHGG) diet supplement in pediatric chronic abdominal pain (CAP) and irritable bowel syndrome (IBS). A randomized, double-blind pilot study was performed in sixty children (8-16 years) with functional bowel disorders, such as CAP or IBS, diagnosed according to Rome III criteria. All patients underwent ultrasound, blood and stool examinations to rule out any organic disease. Patients were allocated to receive PHGG at dosage of 5 g/d (n = 30) or placebo (fruit-juice n = 30) for 4 wk. The evaluation of the efficacy of fiber supplement included IBS symptom severity score (Birmingham IBS Questionnaire), severity of abdominal pain (Wong-Baker Face Pain Rating Score) and bowel habit (Bristol Stool Scale). Symptom scores were completed at 2, 4, and 8 wk. The change from baseline in the symptom severity scale at the end of treatment and at 4 wk follow-up after treatment was the primary endpoint. The secondary endpoint was to evaluate compliance to supplementation with the PHGG in the pediatric population. Differences within groups during the treatment period and follow-up were evaluated by the Wilcoxon signed-rank test. The results of the study were assessed considering some variables, such as frequency and intensity of symptoms with modifications of the bowel habit. Both groups were balanced for baseline characteristics and all patients completed the study. Group A (PHGG group) presented a higher level of efficacy compared to group B (control group), (43% vs 5%, P = 0.025) in reducing clinical symptoms with modification of Birmingham IBS score (median 0 ± 1 vs 4 ± 1, P = 0.025), in intensity of CAP assessed with the Wong-Baker Face Pain Rating Score and in normalization of bowel habit evaluated with the Bristol Stool Scale (40% vs 13.3%, P = 0.025). In IBS subgroups, statistical analysis shown a tendency toward normalization of bowel movements, but there was no difference in the prevalence of improvement in two bowel

  1. Paenibacillus lentus sp. nov., a β-mannanolytic bacterium isolated from mixed soil samples in a selective enrichment using guar gum as the sole carbon source.

    PubMed

    Li, Yong-Fu; Calley, John N; Ebert, Philip J; Helmes, Emily Bulian

    2014-04-01

    A novel bacterial strain, CMG1240(T), was isolated in 1988 from mixed soil samples collected from the United States and South America in a selective enrichment medium with guar gum as the sole carbon source. This microbial isolate showed β-mannanolytic activity to hydrolyse the galactomannans present in guar gum. Strain CMG1240(T) was aerobic, Gram-stain-variable, non-motile, rod-shaped and endospore-forming. It was further examined based on a combination of phenotypic, physiological and genetic characterization. On the basis of 16S rRNA gene sequence similarity, cellular lipid profile and fatty acid composition, strain CMG1240(T) was shown to belong unequivocally to the genus Paenibacillus. Quinone analysis showed that MK-7 was the only menaquinone detected. The main cell-wall sugar was xylose with trace amounts of mannose and glucose. The major polar lipids were diphosphatidylglycerol, phosphatidylglycerol, phosphatidylethanolamine, and unknown glycolipids, phospholipids, phosphoglycolipids and other lipids. The peptidoglycan structure was A1γ (meso-diaminopimelic acid-direct). The major fatty acids were anteiso-C15 : 0 and C16 : 0. The DNA G+C content was 46 mol% as determined experimentally and by analysis of the genomic sequence. The 16S rRNA gene sequence of strain CMG1240(T) shared highest similarity with that of Paenibacillus fonticola ZL(T) (97.6 %) while all other tested Paenibacillus strains showed lower sequence similarities (≤95.3 %). The results of DNA-DNA hybridization and chemotaxonomic tests enabled the genotypic and phenotypic differentiation of strain CMG1240(T) from P. fonticola. Based on these results, strain CMG1240(T) ( = ATCC BAA-2594(T) = DSM 25539(T)) should be designated the type strain of a novel species within the genus Paenibacillus, for which the name Paenibacillus lentus sp. nov. is proposed.

  2. Partially Hydrolyzed Guar Gum Increases Ferroportin Expression in the Colon of Anemic Growing Rats

    PubMed Central

    Carvalho, Luciana; Brait, Débora; Vaz, Márcia; Lollo, Pablo; Morato, Priscila; Oesterreich, Silvia; Raposo, Jorge; Freitas, Karine

    2017-01-01

    Studies have reported a positive effect of prebiotics on the bioavailability of iron. This study evaluated the effect of partially hydrolyzed guar gum (PHGG) on iron absorption mechanisms in anemic rats. Male Wistar rats were fed 75g American Institute of Nutrition Rodent Diets for growth, pregnancy and lactation (AIN93-G) without iron for three weeks in order to induce iron deficiency anemia. Then they were fed a control diet (n = 12; without fiber) or a diet with 7.5% of PHGG (n = 12), both without iron. Food intake, body growth and the feed efficiency coefficient (FEC) were measured. The animals were euthanized after two weeks of treatment. The weight of the organs, the pH of the cecal content, and the hepatic iron and ferroportin expression in the cecum, duodenum, and liver were assessed. The intake of PHGG reduced food intake without affecting body growth, and there was a difference between the groups regarding the FEC (p = 0.026), with the highest value found in the PHGG group. The weight of the cecal content increased (p ≤ 0.001) and the pH of the cecal content was significantly lower in the PHGG group. The intake of PHGG significantly increased ferroportin expression in the cecum;however, the difference was not significant in the duodenum and the liver. PHGG seems to have a positive influence on iron absorption through transporter expression, and structural and physiological changes in the colon of anemic growing animals. PMID:28273797

  3. Determination of relationship between sensory viscosity rating and instrumental flow behaviour of soluble dietary fibers.

    PubMed

    Arora, Simran Kaur; Patel, A A; Kumar, Naveen; Chauhan, O P

    2016-04-01

    The shear-thinning low, medium and high-viscosity fiber preparations (0.15-1.05 % psyllium husk, 0.07-0.6 % guar gum, 0.15-1.20 % gum tragacanth, 0.1-0.8 % gum karaya, 0.15-1.05 % high-viscosity Carboxy Methyl Cellulose and 0.1-0.7 % xanthan gum) showed that the consistency coefficient (k) was a function of concentration, the relationship being exponential (R(2), 0.87-0.96; P < 0.01). The flow behaviour index (n) (except for gum karaya and CMC) was exponentially related to concentration (R(2), 0.61-0.98). The relationship between k and sensory viscosity rating (SVR) was essentially linear in nearly all cases. The SVR could be predicted from the consistency coefficient using the regression equations developed. Also, the relationship of k with fiber concentration would make it possible to identify the concentration of a particular gum required to have desired consistency in terms of SVR.

  4. Simulation of the injection of colloidal suspensions for the remediation of contaminated aquifer systems

    NASA Astrophysics Data System (ADS)

    Tosco, Tiziana; Gastone, Francesca; Sethi, Rajandrea

    2014-05-01

    Concentrated suspensions of microscale and nanoscale zerovalent iron particles (MZVI and NZVI) have been studied in recent years for the remediation of contaminated aquifers. The suspensions are injected into the subsurface to generate a reactive zone, and consequently the prediction of the particles distribution during the injection is a key aspect in the design of a field-scale injection. Colloidal dispersions of MZVI and NZVI are not stable in pure water, and shear thinning, environmentally friendly fluids (guar gum and xanthan gum solutions) were found to be effective in improving colloidal stability, thus greatly improving handling and injectability (1 - 3). Shear thinning fluids exhibit high viscosity in static conditions, improving the colloidal stability, and lower viscosity at high flow rates enabling the injection at limited pressures. Shear thinning fluids exhibit high viscosity in static conditions, improving the colloidal stability, and lower viscosity at high flow rates enabling the injection at limited pressures. In this work, co-funded by European Union project AQUAREHAB (FP7 - Grant Agreement Nr. 226565), laboratory and pilot field tests for MZVI injection in saturated porous media are reported. MZVI was dispersed in guar gum solutions, and the transport behaviour under several polymer concentrations and injection rates was assessed in column tests (4). Based on the experimental results, a modelling approach is proposed to simulate the transport in porous media of nanoscale iron slurries, implemented in E-MNM1D (www.polito.it/groundwater/software). Colloid transport mechanisms are controlled by particle-collector and particle-particle interactions, usually modelled by a non equilibrium kinetic model accounting for deposition and release processes. The key aspects included in the E-MNM1D are clogging phenomena (i.e. reduction of porosity and permeability due to particles deposition), and the rheological properties of the carrier fluid (in this

  5. Guar meal germ and hull fractions differently affect growth performance and intestinal viscosity of broiler chickens.

    PubMed

    Lee, J T; Bailey, C A; Cartwright, A L

    2003-10-01

    High concentrations of guar meal in poultry diets deleteriously affect growth, feed intake, and digesta viscosity. These effects are attributed to residual gum in the meal. A 2 x 5 factorial experiment investigated the impacts of two guar meal fractions (germ and hull) at five inclusion levels (0, 2.5, 5.0, 7.5, and 10.0%) on intestinal viscosity, measures of growth, and feed conversion in broiler chickens fed to 20 d of age. Growth and feed conversion ratio were not affected by inclusion of as much as 7.5% of the germ fraction into poultry diets, while inclusion of the hull fraction reduced growth at all concentrations. The hull fraction increased intestinal viscosity at all inclusion levels fed, although feed conversion was not affected until the inclusion rate exceeded 5.0%. The germ fraction significantly increased intestinal viscosity at 7.5 and 10% inclusion rates. When germ fraction was fed, relative organ weights remained constant through all concentrations except for the ventriculus and duodenum at 7.5 and 10% inclusion levels. Relative pancreas weight was significantly increased at the 10% level of the hull fraction. Increases in intestinal viscosity corresponded with growth depression. These results suggest that residual gum was responsible for some deleterious effects seen when guar meal was fed. The germ fraction was a superior ingredient when compared with the hull fraction. The guar meal germ fraction constituting as much as 7.5% of the diet supported growth and feed conversion measures similar to those observed with a typical corn-soybean poultry ration.

  6. Synthesis and characterization of low cost magnetorheological (MR) fluids

    NASA Astrophysics Data System (ADS)

    Sukhwani, V. K.; Hirani, H.

    2007-04-01

    Magnetorheological fluids have great potential for engineering applications due to their variable rheological behavior. These fluids find applications in dampers, brakes, shock absorbers, and engine mounts. However their relatively high cost (approximately US600 per liter) limits their wide usage. Most commonly used magnetic material "Carbonyl iron" cost more than 90% of the MR fluid cost. Therefore for commercial viability of these fluids there is need of alternative economical magnetic material. In the present work synthesis of MR fluid has been attempted with objective to produce low cost MR fluid with high sedimentation stability and greater yield stress. In order to reduce the cost, economical electrolytic Iron powder (US 10 per Kg) has been used. Iron powder of relatively larger size (300 Mesh) has been ball milled to reduce their size to few microns (1 to 10 microns). Three different compositions have been prepared and compared for MR effect produced and stability. All have same base fluid (Synthetic oil) and same magnetic phase i.e. Iron particles but they have different additives. First preparation involves organic additives Polydimethylsiloxane (PDMS) and Stearic acid. Other two preparations involve use of two environmental friendly low-priced green additives guar gum (US 2 per Kg) and xanthan gum (US 12 per Kg) respectively. Magnetic properties of Iron particles have been measured by Vibrating Sample Magnetometer (VSM). Morphology of Iron particles and additives guar gum and xanthan gum has been examined by Scanning Electron Microscopy (SEM) and Particles Size Distribution (PSD) has been determined using Particle size analyzer. Microscopic images of particles, MH plots and stability of synthesized MR fluids have been reported. The prepared low cost MR fluids showed promising performance and can be effectively used for engineering applications demanding controllability in operations.

  7. Qualitative profile of degummed guar (Cyamopsis tetragonoloba L.) seeds grown in a Mediterranean area for use as animal feed.

    PubMed

    Chiofalo, B; Lo Presti, V; D'Agata, A; Rao, R; Ceravolo, G; Gresta, F

    2018-02-01

    Guar (Cyamopsis tetragonoloba L.) is an interesting summer legume multipurpose crop used for the extraction of seed gum, due to its galactomannan content, and the high-protein by-product, (germ and hull) used for animal feed. The aim of this study was to assess qualitative traits of degummed seeds, named guar meal, of six guar varieties from India, South Africa and USA, grown in a Mediterranean environment (Sicily, Southern Italy), in order to explore their suitability for livestock, and comparing them with the marketed Indian products of guar meals, Churi and Korma. After harvest, seeds were manually degummed and proximate composition was analysed using the official method of analyses, total phenols and tannins by UV spectrophotometry and fatty acids by GC-FID. Qualitative profile of degummed guar seeds (DGS) was significantly (p < .05) influenced by the genotype. Among DGS, Matador showed a high (p < .05) content of protein (518 g/kg), lipids (59.4 g/kg) and the lowest (p < .05) NDF level (181 g/kg) compared to the other varieties. Total phenol content of DGS showed similar values among varieties (2.57 mg gallic acid/g, on average) and with those of guar meal Korma 50%-53% (2.89 mg gallic acid/g) and Korma 56%-58% (2.94 mg gallic acid/g). Tannins were below the instrumental limit of quantification (1.5 mg/g of catechin equivalents) in DGS, as well as in the marketed products. Fatty acid composition was significantly influenced (p < .05) by the genotype. Matador showed the significant highest content of polyunsaturated fatty acids (PUFA) of the n6 series (45.2 g/100 g), whereas India showed the significant (p < .05) highest content of PUFA of the n3 series (3.55 g/100 g), and the significant (p < .05) highest level of n3/n6 PUFA ratio (0.08), and the best (p < .05) Atherogenic Index (0.19) and Thrombogenic Index (0.46). This study shows the interesting nutritional characteristics of degummed guar seeds, underlining that, if the future of

  8. Structure and properties of cellulose and cellulose/guar blend membranes prepared from the n-methyl morpholine n-oxide/water solvent system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Luo, Mengkui; Winter, W.T.

    1995-12-01

    This paper describes membranes of cellulose or its blends with guar gums. Their morphology, hydration behavior, mechanical properties and permselectivity are all dependent upon preparation conditions. Wet membranes exhibit decreased strength but increased elasticity with increasing guar content. Morphologies of the wet membranes range from microporous to macrovoids to systems of regularly arranged conduits and could be formed in a reproducible manner. Dry membranes were invariably dense. Both wet and dry membranes had markedly higher permeation rates for molecules with 400 < M < 4000 than similarly treated commercial cellulose dialysis membranes and the rates increased with increasing guar content.more » Dried membranes of either cellulose or the blends showed appreciable permselectivity in this same intermediate molecular weight range which disappeared with increasing guar content.« less

  9. Growth performance of broilers fed on sprouted-roasted guar bean (Cyamopsis tetragonoloba) based diets.

    PubMed

    Madzimure, James; Muchapa, Lorraine; Gwiriri, Lovemore; Bakare, Archibold G; Masaka, Lawrence

    2017-06-01

    In a completely randomized block design with 96 Cobb-500 broilers, a study was conducted to evaluate the potential of dietary inclusion of sprouted then roasted guar bean in broiler diets. The 96 male day-old broiler chicks, blocked by pen into equal weight groups of six chicks replicated four times per treatment, were randomly allocated to treatment diets containing graded levels of sprouted then roasted guar bean meal (GBM) at 0, 50, 100 and 150 g kg -1 inclusion level. The guar bean was sprouted and roasted to reduce guar gum effect. Total feed intake decreased significantly as the guar bean meal content increased in the starter phase (P < 0.05), but no significant differences in intake of the finisher phase (P > 0.05) were observed. Diets containing 0 and 50 g kg -1 GBM recorded significantly higher total feed intake compared to the diet containing 150 g kg -1 GBM. Although average weight gain was not significantly different in birds fed 0 and 50 g kg -1 GBM diets, it was significantly higher than in birds fed on 100 and 150 g kg -1 GBM diets. Feed conversion ratio was not significantly different among treatment groups (P > 0.05) but showed a general decreasing trend with increasing guar bean meal inclusion level, the effect being more pronounced during the starter phase. In conclusion, the optimum inclusion level of sprouted then roasted guar bean meal in broiler diets is 50 g kg -1 .

  10. beta-Mannanase ameliorates viscosity-associated depression of growth in broiler chickens fed guar germ and hull fractions.

    PubMed

    Lee, J T; Bailey, C A; Cartwright, A L

    2003-12-01

    High concentrations of guar meal in broiler chicken diets reduce body weight and feed efficiency. The increased intestinal viscosity that is responsible for reduced measures of performance results from residual guar gum present in guar meal. Two experiments were designed to study the effects of 2 guar meal fractions at 3 different concentrations, germ (0, 5.0, and 7.5%) and hull (0, 2.5, and 5.0%), and the effectiveness of a beta-mannanase at three levels (0, 1x, and 4x; 1x = 1.09 x 10(5) units/ kg) on broiler growth and feed conversion. Growth and performance were measured as a function of intestinal viscosity. Addition of the germ fraction to rations did not reduce body weight, although feed conversion ratio was increased at 7.5% of the diet. Intestinal viscosity also increased significantly at this level. Enzyme addition significantly reduced intestinal viscosity. Due to an interaction that was present between hull and enzyme concentration, each treatment was compared separately. Inclusion of the hull fraction significantly reduced body weight at both levels of inclusion and increased feed conversion ratio at 5% inclusion. Addition of the enzyme significantly increased body weight and reduced feed conversion ratio in diets containing guar hull fractions. Supplementation of beta-mannanase to feeds containing either fraction of guar meal reduced intestinal viscosity and alleviated the deleterious effects associated with guar meal feeding.

  11. Hygroscopic growth and cloud droplet activation of xanthan gum as a proxy for marine hydrogels

    NASA Astrophysics Data System (ADS)

    Dawson, K. W.; Petters, M. D.; Meskhidze, N.; Petters, S. Suda; Kreidenweis, S. M.

    2016-10-01

    Knowledge of the physical characteristics and chemical composition of marine organic aerosols is needed for the quantification of their effects on cloud microphysical processes and solar radiative transfer. Here we use xanthan gum (XG)—a bacterial biopolymer—as a proxy for marine hydrogels. Measurements were performed for pure XG particles and mixtures of XG with sodium chloride, calcium nitrate, and calcium carbonate. The aerosol hygroscopicity parameter (κ) is derived from hygroscopic growth factor measurements (κgf) at variable water activity (aw) and from cloud condensation nuclei activation efficiency (κccn). The Zdanovskii, Stokes, and Robinson (ZSR) hygroscopicity parameter derived for multicomponent systems (κmix, sol) is used to compare measurements of κgf and κccn. Pure XG shows close agreement of κgf (at aw = 0.9) and κccn of 0.09 and 0.10, respectively. Adding salts to the system results in deviations of κgf (at aw = 0.9) from κccn. The measured κgf and ZSR-derived hygroscopicity parameter (κmix, sol) values for different solutions show close agreement at aw > 0.9, while κgf is lower in comparison to κmix, sol at aw < 0.9. The differences between predicted κmix, sol and measured κgf and κccn values are explained by the effects of hydration and presence of salt ions on the structure of the polymer networks. Results from this study imply that at supersaturations of 0.1 and 0.5%, the presence of 30% sea salt by mass can reduce the activation diameter of pure primary marine organic aerosols from 257 to 156 nm and from 87 to 53 nm, respectively.

  12. Short-term and long-term effects of guar on postprandial plasma glucose, insulin and glucagon-like peptide 1 concentration in healthy rats.

    PubMed

    Prieto, P G; Cancelas, J; Villanueva-Peñacarrillo, M L; Malaisse, W J; Valverde, I

    2006-06-01

    Ingestion of guar gum decreases postprandial glycemia and insulinemia and improves sensitivity to insulin in diabetic patients and several animal models of diabetes. The aim of the present study was to compare the short-term and long-term effects of guar on plasma insulin and glucagon-like peptide 1 concentration in healthy rats. In the short-term experiments, the concomitant intragastric administration of glucose and guar reduced the early increment in plasma glucose, insulin and glucagon-like peptide 1 concentration otherwise induced by glucose alone. Comparable findings were made after twelve days of meal training exposing the rats to either a control or guar-enriched diet for fifteen minutes. Mean plasma glucose concentrations were lower while mean insulin concentrations were higher in the guar group than in the controls according to intragastric glucose tolerance tests conducted in overnight fasted rats maintained for 19 to 36 days on either the control or guar-enriched diet. The intestinal content of glucagon-like peptide 1 at the end of the experiments was also lower in the guar group. Changes in body weight over 62 days of observation were comparable in the control and guar rats. Thus, long-term intake of guar improves glucose tolerance and insulin response to glucose absorption, without improving insulin sensitivity, in healthy rats.

  13. Process model economics of xanthan production from confectionery industry wastewaters.

    PubMed

    Bajić, Bojana Ž; Vučurović, Damjan G; Dodić, Siniša N; Grahovac, Jovana A; Dodić, Jelena M

    2017-12-01

    In this research a process and cost model for a xanthan production facility was developed using process simulation software (SuperPro Designer ® ). This work represents a novelty in the field for two reasons. One is that xanthan gum has been produced from several wastes but never from wastewaters from confectionery industries. The other more important is that the aforementioned software, which in intended exclusively for bioprocesses, is used for generating a base case, i.e. starting point for transferring the technology to industrial scales. Previously acquired experimental knowledge about using confectionery wastewaters from five different factories as substitutes for commercially used cultivation medium have been incorporated into the process model in order to obtain an economic viability of implementing such substrates. A lower initial sugar content in the medium based on wastewater (28.41 g/L) compared to the synthetic medium (30.00 g/L) gave a lower xanthan content at the end of cultivation (23.98 and 26.27 g/L, respectively). Although this resulted in somewhat poorer economic parameters, they were still in the range of being an investment of interest. Also the possibility of utilizing a cheap resource (waste) and reducing pollution that would result from its disposal has a positive effect on the environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Predicting guar seed splitting by compression between two plates using Hertz theory of contact stresses.

    PubMed

    Vishwakarma, R K; Shivhare, U S; Nanda, S K

    2012-09-01

    Hertz's theory of contact stresses was applied to predict the splitting of guar seeds during uni-axial compressive loading between 2 rigid parallel plates. The apparent modulus of elasticity of guar seeds varied between 296.18 and 116.19 MPa when force was applied normal to hilum joint (horizontal position), whereas it varied between 171.86 and 54.18 MPa when force was applied in the direction of hilum joint (vertical position) with in moisture content range of 5.16% to 15.28% (d.b.). At higher moisture contents, the seeds yielded after considerable deformation, thus showing ductile nature. Distribution of stresses below the point of contact were plotted to predict the location of critical point, which was found at 0.44 to 0.64 mm and 0.37 to 0.53 mm below the contact point in vertical and horizontal loading, respectively, depending upon moisture content. The separation of cotyledons from each other initiated before yielding of cotyledons and thus splitting of seed took place. The relationships between apparent modulus of elasticity, principal stresses with moisture content were described using second-order polynomial equations and validated experimentally. Manufacture of guar gum powder requires dehulling and splitting of guar seeds. This article describes splitting behavior of guar seeds under compressive loading. Results of this study may be used for design of dehulling and splitting systems of guar seeds. © 2012 Institute of Food Technologists®

  15. Xanthan gum stabilized PEGylated gold nanoparticles for improved delivery of curcumin in cancer

    NASA Astrophysics Data System (ADS)

    Swami Muddineti, Omkara; Kumari, Preeti; Ajjarapu, Srinivas; Manish Lakhani, Prit; Bahl, Rishabh; Ghosh, Balaram; Biswas, Swati

    2016-08-01

    In recent years, gold nanoparticles (AuNPs) have received immense interest in various biomedical applications including drug delivery, photothermal ablation of cancer and imaging agent for cancer diagnosis. However, the synthesis of AuNPs poses challenges due to the poor reproducibility and stability of the colloidal system. In the present work, we developed a one step, facile procedure for the synthesis of AuNPs from hydrogen tetrachloroaurate (III) hydrate (HAuCl4. 3H2O) by using ascorbic acid and xanthan gum (XG) as reducing agent and stabilizer, respectively. The effect of concentrations of HAuCl4, 3H2O, ascorbic acid and methoxy polyethylene glycol-thiol (mPEG800-SH) were optimized and it was observed that stable AuNPs were formed at concentrations of 0.25 mM, 50 μM and 1 mM for HAuCl4.3H2O, ascorbic acid, and mPEG800-SH, respectively. The XG stabilized, deep red wine colored AuNPs (XG-AuNPs) were obtained by drop-wise addition of aqueous solution of ascorbic acid (50 mM) and XG (1.5 mg ml-1). Synthesized XG-AuNPs showed λmax at 540 nm and a mean hydrodynamic diameter of 80 ± 3 nm. PEGylation was performed with mPEG800-SH to obtain PEGylated XG-AuNPs (PX-AuNPs) and confirmed by Ellman’s assay. No significant shift observed in λmax and hydrodynamic diameter between XG-AuNPs and PX-AuNPs. Colloidal stability of PX-AuNPs was studied in normal saline, buffers within a pH range of 1.2-7.4, DMEM complete medium and in normal storage condition at 4 ˚C. Further, water soluble curcumin was prepared using PVP-K30 as solid dispersion and loaded on to PX-AuNPs (CPX-AuNPs), and evaluated for cellular uptake and cytotoxicity in Murine melanoma (B16F10) cells. Time and concentration dependent studies using CPX-AuNPs showed efficient uptake and decreased cell viability compared to free curcumin.

  16. Development of pH Sensitive Nanoparticles for Intestinal Drug Delivery Using Chemically Modified Guar Gum Co-Polymer.

    PubMed

    Varma, Vegesna Naga Sravan Kumar; Shivakumar, Hosakote Gurumalappa; Balamuralidhara, Veerna; Navya, Manne; Hani, Umme

    2016-01-01

    The aim of the research work was to chemically modify guargum (GG) as a pH sensitive co-polymer and formulating intestinal targeting ESO nanoparticles (NPs) using the synthesized co-polymer. Poly acrylamide-grafted-guar gum (PAAm-g-GG) co-polymer was synthesized by free radical polymerization. Chemical modification of PAAm-g-GG by alkaline hydrolysis results in formation of a pH-sensitive co-polymer. The effect of GG and acryl amide (AAm) on grafting was studied. Esomeprazole magnesium (ESO) loaded pH sensitive NPs were prepared by nano-emulsification polymer crosslinking method and characterized. Sixteen formulations were prepared and the concentration of process variables wasvaried to obtain nanoparticles of 200-600 nm. The NPs were found to be homogenous in size distribution. The encapsulation efficiency and drug loading ranged from 33.2% to 50.1% and 12.2% to 17.2% respectively. Particle size, encapsulation efficiency and drug loading increasedalong with co-polymer concentration. In-vitro release studies at pH 1.2 for 2 h, followed by pH 6.8 showed that environment pH significantly affected the drug release. SEM has shown that NPsare spherical with smooth surface. The pH sensitive PAAm-g-GGNPs resisted the initial release of the drug from the drug loaded NPs in acidic pH and delayed the release process to a longer period in alkaline environment.

  17. Development of pH Sensitive Nanoparticles for Intestinal Drug Delivery Using Chemically Modified Guar Gum Co-Polymer

    PubMed Central

    Varma, Vegesna Naga Sravan Kumar; Shivakumar, Hosakote Gurumalappa; Balamuralidhara, Veerna; Navya, Manne; Hani, Umme

    2016-01-01

    The aim of the research work was to chemically modify guargum (GG) as a pH sensitive co-polymer and formulating intestinal targeting ESO nanoparticles (NPs) using the synthesized co-polymer. Poly acrylamide-grafted-guar gum (PAAm-g-GG) co-polymer was synthesized by free radical polymerization. Chemical modification of PAAm-g-GG by alkaline hydrolysis results in formation of a pH-sensitive co-polymer. The effect of GG and acryl amide (AAm) on grafting was studied. Esomeprazole magnesium (ESO) loaded pH sensitive NPs were prepared by nano-emulsification polymer crosslinking method and characterized. Sixteen formulations were prepared and the concentration of process variables wasvaried to obtain nanoparticles of 200-600 nm. The NPs were found to be homogenous in size distribution. The encapsulation efficiency and drug loading ranged from 33.2% to 50.1% and 12.2% to 17.2% respectively. Particle size, encapsulation efficiency and drug loading increasedalong with co-polymer concentration. In-vitro release studies at pH 1.2 for 2 h, followed by pH 6.8 showed that environment pH significantly affected the drug release. SEM has shown that NPsare spherical with smooth surface. The pH sensitive PAAm-g-GGNPs resisted the initial release of the drug from the drug loaded NPs in acidic pH and delayed the release process to a longer period in alkaline environment. PMID:27610149

  18. Characterization of Non-Newtonian Fluids for Environmental Applications

    NASA Astrophysics Data System (ADS)

    Espinoza, I.; Hauswirth, S.; Cerda, C. C.; Sadeghi, S.

    2017-12-01

    Non-Newtonian fluids are fluids that exhibit viscosity changes with time, stress, or changing shear rates. This distinctive quality is advantageous to a number of applications, such as hydraulic fracturing and contaminant remediation. The use of non-Newtonian fluids in contaminant remediation has recently increased as a method of improving delivery of chemical oxidants and surfactants in hard-to-reach, low permeability zones within the subsurface. As the application of these fluids continues to increase, a need to improve upon the basic understanding of non-Newtonian fluid rheology becomes increasingly important. This study investigates the characteristics of guar gum and xanthan gum, two common non-Newtonian polymers, and how factors such as composition, preparation method, and chemical and biological degradation impact the rheology of the fluids. Because the polymers are semi-hydrophobic, preparation of solutions requires blending, heating, pre-dissolution in alcohol, addition of surfactant, or stirring for extended time periods. Additionally, fluids are commonly filtered to remove undissolved material and gels, and subsequently stored under a variety of conditions. We investigated the effect of these processes on the fluids' rheology by producing solutions at a range of concentrations with a variety of preparation and storage methods. The rheological properties of the solutions were then measured over a period of months with a rotational rheometer. The experimental data were fit to standard rheological models, and the parameters of these models were used to quantitatively assess the effect of chemical composition, physical processing, and storage on the fluid rheology. The results of this study provide an improved basis with which to predict physical, chemical, and temporal alterations of guar and xanthan gum rheology, and thereby allow for improved design of experimental, modeling, and field applications utilizing non-Newtonian fluids.

  19. Fastidian gum: the Xylella fastidiosa exopolysaccharide possibly involved in bacterial pathogenicity.

    PubMed

    da Silva, F R; Vettore, A L; Kemper, E L; Leite, A; Arruda, P

    2001-09-25

    The Gram-negative bacterium Xylella fastidiosa was the first plant pathogen to be completely sequenced. This species causes several economically important plant diseases, including citrus variegated chlorosis (CVC). Analysis of the genomic sequence of X. fastidiosa revealed a 12 kb DNA fragment containing an operon closely related to the gum operon of Xanthomonas campestris. The presence of all genes involved in the synthesis of sugar precursors, existence of exopolysaccharide (EPS) production regulators in the genome, and the absence of three of the X. campestris gum genes suggested that X. fastidiosa is able to synthesize an EPS different from that of xanthan gum. This novel EPS probably consists of polymerized tetrasaccharide repeating units assembled by the sequential addition of glucose-1-phosphate, glucose, mannose and glucuronic acid on a polyprenol phosphate carrier.

  20. A Comparative Study Between Modified Starch and Xanthan Gum Thickeners in Post-Stroke Oropharyngeal Dysphagia.

    PubMed

    Vilardell, N; Rofes, L; Arreola, V; Speyer, R; Clavé, P

    2016-04-01

    Thickeners are used in post-stroke oropharyngeal dysphagia (OD) as a compensatory therapeutic strategy against aspirations. To compare the therapeutic effects of modified starch (MS) and xanthan gum (XG) thickeners on swallow safety and efficacy in chronic post-stroke OD patients using clinical and videofluoroscopic (VFS) assessment. Patients were studied by clinical assessment (volume-viscosity swallow test, V-VST) and VFS using 3 volumes (5, 10, 20 mL) and 3 viscosities (liquid, nectar and spoon thick), comparing MS and XG. We studied 122 patients (46MS, 76XG). (A) V-VST showed that both thickeners similarly improved safety of swallow. Prevalence of safe swallowing significantly increased with enhanced viscosity (P < 0.001 vs liquid), MS: 47.83 % at liquid, 84.93 % at nectar and 92.96 % at spoon thick; XG: 55.31 % at liquid, 77.78 % at nectar and 97.84 % at spoon thick. Patients on MS reported higher prevalence of pharyngeal residue at spoon-thick viscosities. (B) VFS: increasing bolus viscosity with either thickener increased prevalence of safe swallows (P < 0.001 vs liquid), MS: 30.25 % liquid, 61.07 % nectar and 92.64 % spoon thick; XG: 29.12 % liquid, 71.30 % nectar and 89.91 % spoon thick. Penetration-aspiration scale score was significantly reduced with increased viscosity with both thickeners. MS increased oral and pharyngeal residues at nectar and spoon-thick viscosities but XG did not. Timing of airway protection mechanisms and bolus velocity were not affected by either thickener. Increasing bolus viscosity with MS and XG thickeners strongly and similarly improved safety of swallow in chronic post-stroke OD by a compensatory mechanism; in contrast only MS thickeners increased oropharyngeal residue.

  1. Efficacy of a fixed combination of 0.09 % xanthan gum/0.1 % chondroitin sulfate preservative free vs polyethylene glycol/propylene glycol in subjects with dry eye disease: a multicenter randomized controlled trial.

    PubMed

    Pérez-Balbuena, Ana L; Ochoa-Tabares, Juan C; Belalcazar-Rey, Sandra; Urzúa-Salinas, Cristian; Saucedo-Rodríguez, Laura R; Velasco-Ramos, Regina; Suárez-Sánchez, Raúl G; Rodríguez-Carrizalez, Adolfo D; Oregón-Miranda, Aldo A

    2016-09-20

    Dry eye disease (DED) is multifactorial, affecting 5-34 % of the global adult population and reducing quality of life. The artificial tears or lubricants are the therapy most used for the treatment of DED, due to their low side effect profile, which attempt to modify the properties of the tear film. The aim of the present study was to evaluate the clinical efficacy of a fixed combination of xanthan gum and chondroitin sulfate preservative free on the ocular surface of patients with dry eye disease during 60 days of intervention. A phase III, double-blind, masked, controlled, multicenter, clinical trial of 148 subjects, randomized to either a fixed combination of xanthan gum 0.09 % and chondroitin sulfate 0.1 % (XG/CS) ophthalmic solution (n = 76) or a fixed combination of polyethylene glycol 400 0.4 % and propylene glycol 0.3 % (PEG/PG) (n = 72). Subjects self-dosed four times daily during 60 days. Follow-up was set on days 2, 7, 15, 30 and 60. Assessments of anterior/posterior segment ocular signs were performed. The outcome measures included Schirmer test, tear film break-up time and OSDI score. Security variables included intraocular pressure, lisamine green and fluorescein ocular surface stains. The primary efficacy endpoints were similar between groups at baseline. After intervention time Schirmer test increased in both groups compared to baseline, XG/CS (6.4 ± 2.2 vs 11.0 ± 6.6; p = 0.002) and PEG/PG (6.5 ± 2.5 vs 10.5 ± 5.6; p = 0.019) respectively. Similar results were reported in the tear film break-up time in XG/CS (5.5 ± 2.1 vs 7.4 ± 2.9; p = 0.027) and PEG/PG (5.2 ± 2.0 vs 7.4 ± 2.7; p = 0.046) respectively. The OSDI score decreased to normal values in both groups, XG/CS (19.3 ± 7.4 vs 7.3 ± 5.9; p = 0.001) and PEG/PG (19.3 ± 7.5 vs 7.9 ± 8.2; p = 0.001) respectively. There was no significant difference between treatments for any parameter. Moreover, both

  2. Post-meal perceivable satiety and subsequent energy intake with intake of partially hydrolysed guar gum.

    PubMed

    Rao, Theertham Pradyumna; Hayakawa, Mariko; Minami, Tadayasu; Ishihara, Noriyuki; Kapoor, Mahendra Parkash; Ohkubo, Tsutomu; Juneja, Lekh Raj; Wakabayashi, Kazuo

    2015-05-14

    Partially hydrolysed guar gum (PHGG), a soluble dietary fibre, has been shown to provide many health benefits. Previous studies had suggested that the combination of PHGG with protein provided a significant satiation effect on visual analogue scales (VAS). What was lacking was only the effect of administration of small doses of PHGG on post-meal satiation and subsequent energy intake. The objectives of the present investigations were to find the subjective perception of post-meal satiety with acute and long term administration of small amounts of PHGG alone with food, its effects on subsequent energy intake and the comparative effects among different types of soluble fibres. The following three separate studies were conducted: in study 1, healthy subjects (n 12) consumed PHGG along with breakfast, lunch and an evening snack; in study 2, healthy subjects (n 24) consumed 2 g of PHGG or dextrin along with yogurt as breakfast for 2 weeks; in study 3, healthy subjects (n 6) took 6 g each of either PHGG or indigestible dextrin or inulin along with lunch. In all the studies, various satiety parameters were measured on VAS before and after consumption of PHGG. The addition of PHGG showed significant (P < 0.05) acute (studies 1 and 3) and long-term (studies 1 and 2) satiety effects compared to the control and/or an equal amount of carbohydrate or other types of soluble fibre. Study 2 also indicated that the prolonged consumption of PHGG may significantly (P < 0.05) reduce energy intake from whole-day snacking. PHGG could be an ideal natural soluble fibre for delivering acute and long term satiety effects for comfortable appetite control.

  3. Fabrication of novel metal ion imprinted xanthan gum-layered double hydroxide nanocomposite for adsorption of rare earth elements.

    PubMed

    Iftekhar, Sidra; Srivastava, Varsha; Hammouda, Samia Ben; Sillanpää, Mika

    2018-08-15

    The work focus to enhance the properties of xanthan gum (XG) by anchoring metal ions (Fe, Zr) and encapsulating inorganic matrix (M@XG-ZA). The fabricated nanocomposite was characterized by Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX), Fourier Transform Infrared Spectroscopy (FTIR), surface area (BET) and zeta potential analysis. The adsorption of Sc, Nd, Tm and Yb was investigated after screening of synthesized materials in detail to understand the influence of pH, contact time, temperature and initial REE (rare earth element) concentration both in single and multicomponent system via batch adsorption. The adsorption mechanism was verified by FTIR, SEM and elemental mapping. The SEM images of Zr@XG-ZA demonstrate scutes structure, which disappeared after adsorption of REEs. The maximum adsorption capacities were 132.30, 14.01, 18.15 and 25.73 mg/g for Sc, Nd, Tm and Yb, respectively. The adsorption efficiency over Zr@XG-ZA in multicomponent system was higher than single system and the REEs followed the order: Sc > Yb > Tm > Nd. The Zr@XG-ZA demonstrate good adsorption behavior for REEs up to five cycles and then it can be used as photocatalyst for the degradation of tetracycline. Thus, the work adds a new insight to design and preparation of efficient bifunctional adsorbents from sustainable materials for water purification. Copyright © 2018 Elsevier Ltd. All rights reserved.

  4. Inhibitory effect of xanthan gum and synergistic surfactant additives for mild steel corrosion in 1M HCl.

    PubMed

    Mobin, Mohammad; Rizvi, Marziya

    2016-01-20

    Natural polymer xanthan gum (XG) was investigated as eco friendly corrosion inhibitor for mild steel in 1M HCl at 30 °C, 40 °C, 50 °C and 60 °C, respectively. The inhibition studies were performed using gravimetric analysis, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), quantum chemical calculations, scanning electron microscopy (SEM), and UV-visible spectrophotometry. XG significantly reduces the corrosion rates of mild steel. The inhibition efficiency (IE) of the XG increased with increase in concentration, but decreased with temperature; the maximum IE of 74.24% was obtained at concentration of 1000 ppm at 30 °C. The inhibiting action of XG is synergistically enhanced on addition of very small amount of surfactants sodium dodecyl sulfate (SDS), cetyl pyridinium chloride (CPC) and Triton X-100 (TX). The effect of SDS is more pronounced than other surfactants. Potentiodynamic polarization studies confirm XG as a mixed type inhibitor. Results of weight loss measurements are in good agreement of the results of electrochemical measurements. The UV-visible spectroscopic results indicate the formation of complex between XG and Fe(2+) ions during corrosion reaction. Mechanism of inhibition was also investigated by calculating the thermodynamic and activation parameters like ΔG(0), Ea, ΔH and ΔS. The adsorption of inhibitor on mild steel surface obeys Langmuir adsorption isotherm. SEM micrographs show a clearly different morphology in presence of XG and XG-surfactant additives and confirmed the existence of an adsorbed protective film on the mild steel surface. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Cyclodextrin Complexes of Reduced Bromonoscapine in Guar Gum Microspheres Enhance Colonic Drug Delivery

    PubMed Central

    2015-01-01

    Here, we report improved solubility and enhanced colonic delivery of reduced bromonoscapine (Red-Br-Nos), a cyclic ether brominated analogue of noscapine, upon encapsulation of its cyclodextrin (CD) complexes in bioresponsive guar gum microspheres (GGM). Phase–solubility analysis suggested that Red-Br-Nos complexed with β-CD and methyl-β-CD in a 1:1 stoichiometry, with a stability constant (Kc) of 2.29 × 103 M–1 and 4.27 × 103 M–1. Fourier transforms infrared spectroscopy indicated entrance of an O–CH2 or OCH3–C6H4–OCH3 moiety of Red-Br-Nos in the β-CD or methyl-β-CD cavity. Furthermore, the cage complex of Red-Br-Nos with β-CD and methyl-β-CD was validated by several spectral techniques. Rotating frame Overhauser enhancement spectroscopy revealed that the Ha proton of the OCH3–C6H4–OCH3 moiety was closer to the H5 proton of β-CD and the H3 proton of the methyl-β-CD cavity. The solubility of Red-Br-Nos in phosphate buffer saline (PBS, pH ∼ 7.4) was improved by ∼10.7-fold and ∼21.2-fold when mixed with β-CD and methyl-β-CD, respectively. This increase in solubility led to a favorable decline in the IC50 by ∼2-fold and ∼3-fold for Red-Br-Nos−β-CD-GGM and Red-Br-Nos–methyl-β-CD-GGM formulations respectively, compared to free Red-Br-Nos−β-CD and Red-Br-Nos–methyl-β-CD in human colon HT-29 cells. GGM-bearing drug complex formulations were found to be highly cytotoxic to the HT-29 cell line and further effective with simultaneous continuous release of Red-Br-Nos from microspheres. This is the first study to showing the preparation of drug-complex loaded GGMS for colon delivery of Red-Br-Nos that warrants preclinical assessment for the effective management of colon cancer. PMID:25350222

  6. Rapid adsorptive removal of toxic Pb(2+) ion from aqueous solution using recyclable, biodegradable nanocomposite derived from templated partially hydrolyzed xanthan gum and nanosilica.

    PubMed

    Ghorai, Soumitra; Sarkar, Amit Kumar; Pal, Sagar

    2014-10-01

    This work studied the application of a novel biodegradable nanocomposite based on partially hydrolyzed polyacrylamide grafted xanthan gum and nanosilica (h-XG/SiO2) towards efficient and rapid removal of toxic Pb(2+) ions from aqueous environment. The uptake ability of Pb(2+) using h-XG/SiO2 has been studied in batch adsorption experiments with variation of adsorption parameters. The excellent removal rate (99.54% adsorption within 25min) and superior adsorption capacity (Qmax=1012.15mgg(-1)) of the composite material have been explained on the basis of synergistic and chelating effects of h-XG/SiO2 with Pb(2+) ion through electrostatic interactions. The kinetics, isotherm and thermodynamics studies reveal that Pb(2+) adsorb rapidly on nanocomposite surface, which is in agreement with pseudo-second-order kinetics and Langmuir adsorption isotherm models. In consequence of excellent adsorption as well as regeneration characteristics of nanocomposite, it has been found to be a promising adsorbent towards removal of Pb(2+) ions from battery industry wastewater. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. The management of xerostomia in patients on haemodialysis: comparison of artificial saliva and chewing gum.

    PubMed

    Bots, Casper P; Brand, Henk S; Veerman, Enno C I; Valentijn-Benz, Marianne; Van Amerongen, Barbara M; Nieuw Amerongen, Arie V; Valentijn, Robert M; Vos, Pieter F; Bijlsma, Joost A; Bezemer, Pieter D; ter Wee, Piet M

    2005-04-01

    Many patients on haemodialysis (HD) therapy suffer from a dry mouth and xerostomia. This can be relieved by mechanical and gustatory stimulation or palliative care. The aim of this crossover study was to investigate the effect and preferences of a sugar-free chewing gum (Freedent White) and a xanthan gum-based artificial saliva (Xialine) in the management of xerostomia in chronic HD patients. Sixty-five HD patients participated in a 6-week crossover trial. The artificial saliva was rated significantly lower than the chewing gum for effectiveness, taste and a global assessment. No preference differences were found for gender and age, although older subjects rated the artificial saliva with a higher mark. Thirty-nine subjects (60%) preferred chewing gum, 15% (n=10) preferred the artificial saliva. Therefore, both chewing gum and artificial saliva could play an important role in the palliative care of xerostomia in HD patients.

  8. Pilot Study Report, Cape Canaveral Air Station, Florida. Permeable Reactive Treatment (PeRT) Wall Pilot Study. Revision 2

    DTIC Science & Technology

    1999-11-01

    slurry was made from mixing iron, guar gum , an enzyme and borax. The guar gum was Hercules Supercol™ food grade fine (200-mesh size) powder . It was...Florida The guar gum was mixed with water in batches in a stirred open top tank to form 2 to 3% solutions. The guar gum solution was pumped first to a...holding tank, then into a truck-mounted batch mixing plant. A positive displacement pump controlled the feed rate of guar gum to the batch mixing plant

  9. The effects of a xanthan gum-based thickener on the swallowing function of patients with dysphagia.

    PubMed

    Rofes, L; Arreola, V; Mukherjee, R; Swanson, J; Clavé, P

    2014-05-01

    Increasing bolus viscosity of thin liquids is a basic therapeutic strategy to protect patients with oropharyngeal dysphagia (OD) from aspiration. However, conventional starch thickeners increase post-deglutitive residue. To assess the therapeutic effect of a new xanthan gum-based thickener, Resource ThickenUp Clear (Nestlé Health Science, Vevey, Switzerland) on patients with oropharyngeal dysphagia. We studied the effect of Resource ThickenUp Clear using a clinical method and videofluoroscopy on 120 patients with oropharyngeal dysphagia (66 with stroke, 41 older and 13 with neurodegenerative diseases) and 14 healthy volunteers while swallowing thin-liquid, nectar-like and spoon-thick boluses. We assessed the prevalence of signs of impaired safety and efficacy of swallow and the physiology of the swallow response. Increasing bolus viscosity with Resource ThickenUp Clear: (i) improved safety of swallow demonstrated by a reduction in the prevalence of cough and voice changes in the clinical study and penetrations and aspirations during video fluoroscopy. Prevalence of aspirations was 12.7% with thin liquid, 7.7% with nectar-like (P < 0.01) and 3.4% with spoon-thick (P < 0.01) viscosities. Penetration-Aspiration Scale was reduced from 3.24 ± 0.18 at thin liquid to 2.20 ± 0.18 at nectar-like (P < 0.001) and to 1.53 ± 0.13 at spoon-thick (P < 0.001) viscosities; (ii) did not enhance pharyngeal residue; (iii) nectar-like viscosity did not affect bolus velocity nor timing of swallow response and (iv) spoon-thick viscosity reduced bolus velocity. Resource ThickenUp Clear improves the safety of swallow without increasing residue providing a viscosity-dependent therapeutic effect for patients with oropharyngeal dysphagia. At nectar viscosity, the effect is due to intrinsic texture properties, spoon-thick viscosity adding changes in swallow physiology. NCT01158313. © 2014 John Wiley & Sons Ltd.

  10. Evaluation of protective effect of different dietary fibers on polyphenolic profile stability of maqui berry (Aristotelia chilensis (Molina) Stuntz) during in vitro gastrointestinal digestion.

    PubMed

    Viuda-Martos, Manuel; Lucas-Gonzalez, Raquel; Ballester-Costa, Carmen; Pérez-Álvarez, José A; Muñoz, Loreto A; Fernández-López, Juana

    2018-01-24

    The aim of this work was to determine the protective effect of different dietary fibers on (i) the recovery and bioaccessibility indexes, and (ii) the stability of polyphenolic compounds (phenolic acids, flavonoids and anthocyanins) of maqui berry powder subjected to in vitro gastrointestinal digestion (GID). The extracts obtained in each phase (oral, gastric and intestinal) of GID were used to analyze the stability of polyphenolic compounds by HPLC, and the bioaccessibility of these compounds was also determined. At the end of the GID process, the mixture of maqui berry with the different fibers increased the bioaccessibility index of the phenolic and flavonoid compounds in all cases. The results obtained suggest that the anthocyanins and phenolic acids and flavonoid compounds present in maqui are stabilized through dietary fiber interactions, which might provide sufficient levels for absorption during gastrointestinal digestion. The gums sodium carboxymethyl cellulose, xanthan gum and guar gum provided the best protective effect.

  11. Partially hydrolyzed guar gum increases intestinal absorption of iron in growing rats with iron deficiency anemia.

    PubMed

    de Cássia Freitas, Karine; Amancio, Olga Maria Silvério; Ferreira Novo, Neil; Fagundes-Neto, Ulysses; de Morais, Mauro Batista

    2006-10-01

    The objective of this study was to evaluate the effect of partially hydrolyzed guar gum (PHGG) dietary fiber towards intestinal iron absorption, for dietary intake and on the growth of rats with iron deficiency anemia in comparison to those fed on a diet with cellulose and without dietary fiber. Male Wistar rats (n=24) weaned at 21 days were fed with AIN93-G diet without iron for 2 weeks in order to induce iron deficiency anemia. At 36 days old, the anemic rats were divided into three groups: (1) PHGG group-100g of PHGG per kg of diet; (2) Cellulose group-100g of cellulose per kg of diet; (3) Control group-diet without dietary fiber. All the diets had 25mg of elemental iron/kg of diet added to lead to recovery from iron deficiency anemia. The final hemoglobin values in g/dl, for the PHGG group, the cellulose group and the control group were, respectively: 11.3+/-1.2, 8.6+/-0.7 and 8.1+/-0.9 (P<0.001). The levels of hepatic iron, in mug/g of dry tissue, in the same order, were: 322.2+/-66.6, 217.2+/-59.1 and 203.7+/-42.4 (P<0.001). Apparent iron intestinal absorption was, respectively: 67.5+/-8.9%, 35.4+/-15.3% and 31.3+/-24.9% (P<0.001). The three groups consumed similar quantities of diet. The changes in weight and in body length were similar in the three groups studied. PHGG led to greater intestinal absorption of iron, regeneration of hemoglobin and hepatic levels of iron than diet with cellulose and diet control.

  12. Different effect of psyllium and guar dietary supplementation on blood pressure control in hypertensive overweight patients: a six-month, randomized clinical trial.

    PubMed

    Cicero, Arrigo F G; Derosa, Giuseppe; Manca, Marco; Bove, Marilisa; Borghi, Claudio; Gaddi, Antonio V

    2007-08-01

    In the setting of a six-month, open-label clinical trial, 141 consecutively enrolled, hypertensive, overweight patients were randomized to the oral ingestion of psyllium powder or guar gum 3.5 gr t.i.d., to be taken 20 min before the main two meals, or to standard diet. Both fibers improved significantly BMI, FPG, FPI, HOMA Index, HbA1c, LDL-C, and ApoB. Psyllium supplementation only exerted a significant improvement in plasma TG concentration, in SBP and DBP. In our study, six-month supplementation with psyllium fiber, but not with guar fiber nor standard diet, appears to significantly reduce both SBP and DBP in hypertensive overweight subjects.

  13. Sugar Metabolism of the First Thermophilic Planctomycete Thermogutta terrifontis: Comparative Genomic and Transcriptomic Approaches

    PubMed Central

    Elcheninov, Alexander G.; Menzel, Peter; Gudbergsdottir, Soley R.; Slesarev, Alexei I.; Kadnikov, Vitaly V.; Krogh, Anders; Bonch-Osmolovskaya, Elizaveta A.; Peng, Xu; Kublanov, Ilya V.

    2017-01-01

    Xanthan gum, a complex polysaccharide comprising glucose, mannose and glucuronic acid residues, is involved in numerous biotechnological applications in cosmetics, agriculture, pharmaceuticals, food and petroleum industries. Additionally, its oligosaccharides were shown to possess antimicrobial, antioxidant, and few other properties. Yet, despite its extensive usage, little is known about xanthan gum degradation pathways and mechanisms. Thermogutta terrifontis, isolated from a sample of microbial mat developed in a terrestrial hot spring of Kunashir island (Far-East of Russia), was described as the first thermophilic representative of the Planctomycetes phylum. It grows well on xanthan gum either at aerobic or anaerobic conditions. Genomic analysis unraveled the pathways of oligo- and polysaccharides utilization, as well as the mechanisms of aerobic and anaerobic respiration. The combination of genomic and transcriptomic approaches suggested a novel xanthan gum degradation pathway which involves novel glycosidase(s) of DUF1080 family, hydrolyzing xanthan gum backbone beta-glucosidic linkages and beta-mannosidases instead of xanthan lyases, catalyzing cleavage of terminal beta-mannosidic linkages. Surprisingly, the genes coding DUF1080 proteins were abundant in T. terrifontis and in many other Planctomycetes genomes, which, together with our observation that xanthan gum being a selective substrate for many planctomycetes, suggest crucial role of DUF1080 in xanthan gum degradation. Our findings shed light on the metabolism of the first thermophilic planctomycete, capable to degrade a number of polysaccharides, either aerobically or anaerobically, including the biotechnologically important bacterial polysaccharide xanthan gum. PMID:29163426

  14. Mobility of Nanoscale and Microscale iron for groundwater remediation: experiments and modelling

    NASA Astrophysics Data System (ADS)

    Tosco, T.; Gastone, F.; Sethi, R.

    2012-12-01

    Colloidal suspensions of zerovalent iron micro- and nanoparticles (MZVI and NZVI) have been studied in recent years for in-situ groundwater remediation. Thanks to their small size, MZVI and NZVI can be dispersed in aqueous suspensions and directly injected into the subsurface, for a targeted treatment of contamination plumes and even sources. However, colloidal dispersions of such particles are not stable in pure water, due to fast aggregation (for NZVI) and gravitational sedimentation (for MZVI). Viscous, environmentally friendly fluids (guar gum and xanthan gum solutions), which exhibit shear thinning rheological properties, were found to be effective in improving colloidal stability, thus greatly improving handling and injectability (1-3). The present work reports laboratory tests and numerical modelling concerning the mobility of MZVI and NZVI viscous suspensions in porous media. The efficacy of xanthan and guar gum was investigated in column transport tests, performed injecting highly concentrated iron suspensions (20 g/L), dispersed in xanthan gum (3g/L) and guar gum (3-6 g/l) solutions. Particle breakthrough curves and concentration profiles were monitored by magnetic susceptibility measurements. Pressure drop at column ends was also continuously monitored. The tests proved that green polymers can greatly improve both colloidal stability and mobility of the particles. Their use is fundamental in particular for MZVI, which cannot be transported nor even dispersed in pure water. A numerical model for NZVI and NZVI transport in porous media was then developed (E-MNM1D, Enhanced Micro-and Nanoparticle transport Model in porous media in 1D geometry) (4). Due to the high concentration of the particles and to the non-Newtonian rheology of the carrier fluid, hydrodynamic parameters, fluid properties and concentration of deposed and suspended particles are mutually influenced. The rheological properties of the suspensions are accounted for through a variable

  15. Effects of addition of hydrocolloids on the textural and structural properties of high-protein intermediate moisture food model systems containing sodium caseinate.

    PubMed

    Li, J; Wu, Y; Ma, Y; Lu, N; Regenstein, J M; Zhou, P

    2017-08-01

    High-protein intermediate moisture food (HPIMF) containing sodium caseinate (NaCN) often gave a harder texture compared with that made from whey proteins or soy proteins, due to the aggregation of protein particles. The objectives of this study were to explore whether the addition of hydrocolloids could soften the texture and illustrate the possible mechanism. Three kinds of hydrocolloids, xanthan gum, κ-carrageenan, and gum arabic were chosen, and samples including of these three kinds of hydrocolloids were studied through texture analysis using a TPA test and microstructure observation by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). The texture analysis results showed that xanthan gum was more effective at softening the HPIMF containing NaCN compared to κ-carrageenan and gum arabic. In addition, with the increase of xanthan gum concentration from 0.2 to 2%, the HPIMF matrix became softer, and fractures were observed during the compression for samples with xanthan gum added at low concentrations but not 2%. Microstructure observation suggested that the matrix originally dominated by the network formed through the aggregation of swollen protein particles was inhibited by the addition of xanthan gum, resulting in the softening of the texture and also contributing to the fracture during compression. With the increase of xanthan gum concentration up to 2%, the protein dominating network would be gradually replaced with a matrix dominated by the newly formed network of xanthan gum with protein particles as fillers. Furthermore, this formation of a xanthan gum dominating network structure also resulted in changes in small molecule distribution, as observed using low-field NMR.

  16. Shear-Resistant Drag Reduction Polymers. Part 1. Molecular Investigations of Polymer Drag Reduction and the Development of Laboratory Screening Methods

    DTIC Science & Technology

    1990-05-14

    systems was established and the influence of such variables on PAA drag reduction was evaluated using these flow systems. Guar gum , alleged to be a...studies of the shear resistance of two polymer systems, polyacrylic acid and guar gum (neither of which turned out to have the required characteristics...PAA is twice as efficient as that of guar gum . The outcome of this testing is of special importance, because there has been a common belief in guar gum

  17. The Physico-Chemical Properties of Dietary Fibre Determine Metabolic Responses, Short-Chain Fatty Acid Profiles and Gut Microbiota Composition in Rats Fed Low- and High-Fat Diets

    PubMed Central

    Kulcinskaja, Evelina; Marungruang, Nittaya; Matziouridou, Chrysoula; Nilsson, Ulf; Stålbrand, Henrik; Nyman, Margareta

    2015-01-01

    The aim of this study was to investigate how physico-chemical properties of two dietary fibres, guar gum and pectin, affected weight gain, adiposity, lipid metabolism, short-chain fatty acid (SCFA) profiles and the gut microbiota in male Wistar rats fed either low- or high-fat diets for three weeks. Both pectin and guar gum reduced weight gain, adiposity, liver fat and blood glucose levels in rats fed a high-fat diet. Methoxylation degree of pectin (low, LM and high (HM)) and viscosity of guar gum (low, medium or high) resulted in different effects in the rats, where total blood and caecal amounts of SCFA were increased with guar gum (all viscosities) and with high methoxylated (HM) pectin. However, only guar gum with medium and high viscosity increased the levels of butyric acid in caecum and blood. Both pectin and guar gum reduced cholesterol, liver steatosis and blood glucose levels, but to varying extent depending on the degree of methoxylation and viscosity of the fibres. The medium viscosity guar gum was the most effective preparation for prevention of diet-induced hyperlipidaemia and liver steatosis. Caecal abundance of Akkermansia was increased with high-fat feeding and with HM pectin and guar gum of all viscosities tested. Moreover, guar gum had distinct bifidogenic effects independent of viscosity, increasing the caecal abundance of Bifidobacterium ten-fold. In conclusion, by tailoring the viscosity and possibly also the degree of methoxylation of dietary fibre, metabolic effects may be optimized, through a targeted modulation of the gut microbiota and its metabolites. PMID:25973610

  18. Rheological Behaviors of Thickened Infant Formula Prepared with Xanthan Gum-Based Food Thickeners for Dysphagic Infants.

    PubMed

    Yoon, Sung-No; Yoo, Byoungseung

    2017-06-01

    Thickened infant formula (TIF) prepared with commercial xanthan gum (XG)-based food thickeners are commonly used to care for infants with swallowing difficulties or regurgitation. In this study, the rheological properties of TIF prepared with four commercial food thickeners (coded A-D) were determined as a function of thickener concentration, thickener type, and setting time because the selection of an appropriate food thickener for TIF preparation is necessary for managing dysphagia in infants. The flow and dynamic rheological properties of TIF were investigated at three different concentrations (1.0, 2.0, and 3.0% w/w) of XG-based thickener. The flow properties of TIF were described by the power law and Casson models. All TIF samples demonstrated high shear-thinning (n = 0.12-0.33) behavior at all concentrations (1.0-3.0%). Their apparent viscosity (η a,50 ), consistency index (K), yield stress (σ oc ), storage modulus (G'), and loss modulus (G″) increased with an increase in thickener concentration. In general, TIF with thickener A had much higher values for all flow parameters at each thickener concentration when compared to TIF with other thickeners (B, C, and D). However, the n values of TIF samples with thickener A were much lower, indicating that they are less slimy and have better mouthfeel than those of TIF samples with other thickeners. All TIF samples with different thickeners produced different thickening patterns over a setting time. The flow and dynamic rheological parameters demonstrated differences in the rheological behaviors between XG-based thickeners, indicating that their rheological properties are related to the concentration and type of thickener as well as the setting time. These results suggest the importance of considering not only the concentration and type of thickeners but also the time being administered after its addition to effectively treat dysphagic infants. In addition, selecting an appropriate commercial food thickener

  19. Gas chromatographic-mass spectrometric characterisation of plant gums in samples from painted works of art.

    PubMed

    Bonaduce, Ilaria; Brecoulaki, Hariclia; Colombini, Maria Perla; Lluveras, Anna; Restivo, Vincenzo; Ribechini, Erika

    2007-12-21

    This paper presents an analytical GC-MS procedure to study the chemical composition of plant gums, determining aldoses and uronic acids in one step. The procedure is based on the silylation of aldoses and uronic acids, released from plant gums by microwave assisted hydrolysis, and previously converted into the corresponding diethyl-dithioacetals and diethyl-dithioacetal lactones. Using this method only one peak for each compound is obtained, thus providing simple and highly reproducible chromatograms. The analytical procedure was optimised using reference samples of raw plant gums (arabic, karaya, ghatti, guar, locust bean and tragacanth, cherry, plum and peach gums), commercial watercolours and paint layers prepared according to ancient recipes at the Opificio delle Pietre Dure of Florence (Italy). To identify gum media in samples of unknown composition, a decisional schema for the gum identification and the principal component analysis of the relative sugar percentage contents were employed. The procedure was used to study samples collected from wall paintings from Macedonian tombs (4th-3rd centuries bc) and from the Mycenaean "Palace of Nestor" (13th century bc) in Pylos, Greece. The presence of carbohydrates was ascertained and plant gum binders (fruit and a mixture of tragacanth and fruit tree gums) were identified in some of the samples.

  20. Molecular dynamics study on the structural and dynamic properties of xanthan gum in a dilute solution under the effect of temperature

    NASA Astrophysics Data System (ADS)

    Ong, Ernest E. S.; O'Byrne, Sean; Liow, Jong-Leng

    2018-04-01

    Xanthan gum (XG) is considered one of the most industrially important polysaccharides, with applications ranging from food products such as ice creams and salad dressings to pharmaceuticals and oil well drilling fluids. The wide application of XG is due to its favourable rheological properties and its capability to resist degradation under a high shear or high temperature environment. It is generally accepted that both inter- and intramolecular interactions, including hydrogen bonding (HB), are responsible for its unique properties. To date, there is still a lack of comprehensive examination on the HB mechanism in polysaccharides. Therefore, the study proposed here was conducted using molecular dynamics (MD) simulations that are able to provide insights with an unparalleled temporal and spatial resolution. Since XG is used over a broad range of temperatures, the implications of thermal effect on the structure and molecular interactions of XG in an aqueous solution are discussed in this paper. MD simulations were run at an isobaric-isothermal condition with 1 atm target pressure and five temperatures ranging between 283K and 353K. From the simulation results, an increasingly extended conformation of XG is observed as the temperature rises, and this finding matches qualitatively with the results published in the literature. The radius of gyration, radial pair distribution functions and intramolecular HB of XG were also discussed. The outcomes of the present study may serve as a stepping stone for the future studies on polysaccharides using MD simulations.

  1. A novel hydrogel plug of Sterculia urens for pulsatile delivery: in vitro and in vivo evaluation.

    PubMed

    Amrutkar, Jitendra R; Gattani, Surendra G

    2012-01-01

    The objective of this study was to investigate a novel hydrogel plug using isolated root mucilage of Sterculia urens to obtain a desired lag time for an oral chronotherapeutic colon-specific pulsatile drug delivery of indomethacin. Pulsatile drug delivery was developed using chemically treated hard gelatin capsule bodies filled with eudragit multiparticulates of indomethacin, and sealed with different hydrogel plugs (root mucilage of S. urens, xanthan gum, guar gum, HPMC K4M and combination of maltodextrin with guar gum). Indomethacin multiparticulates were prepared using extrusion spheronization, spray drying and solvent evaporation techniques with Eudragit® L-100 and S-100 (1:2) by varying drug-to-polymer ratio. After oral administration, the water-soluble cap of capsule dissolved in the intestinal fluid and the hydrogel plug swells. After a controlled time, the swollen plug subsequently ejected from the dosage form, releases the contents of the capsule. The formulation factors affecting the drug release were concentration and types of hydrogel plug used. In vivo gamma scintigraphy study in healthy rabbits proved the capability of the system to release drug in lower parts of the gastrointestinal tract after a programmed lag time. This study demonstrates that the indomethacin multiparticulates could be successfully colon-targeted by the design of time and pH-dependent modified chronopharmaceutical formulation. In conclusion, the investigated novel hydrogel plug could be a valuable tool for achieving desired lag time.

  2. Milk whey proteins and xanthan gum interactions in solution and at the air-water interface: a rheokinetic study.

    PubMed

    Perez, Adrián A; Sánchez, Cecilio Carrera; Patino, Juan M Rodríguez; Rubiolo, Amelia C; Santiago, Liliana G

    2010-11-01

    In this contribution, we present experimental information about the effect of xanthan gum (XG) on the adsorption behaviour of two milk whey protein samples (MWP), beta-lactoglobulin (beta-LG) and whey protein concentrate (WPC), at the air-water interface. The MWP concentration studied corresponded to the protein bulk concentration which is able to saturate the air-water interface (1.0 wt%). Temperature, pH and ionic strength of aqueous systems were kept constant at 20 degrees C, pH 7 and 0.05 M, respectively, while the XG bulk concentration varied in the range 0.00-0.25 wt%. Biopolymer interactions in solution were analyzed by extrinsic fluorescence spectroscopy using 1-anilino-8-naphtalene sulphonic acid (ANS) as a protein fluorescence probe. Interfacial biopolymer interactions were evaluated by dynamic tensiometry and surface dilatational rheology. Adsorption behaviour was discussed from a rheokinetic point of view in terms of molecular diffusion, penetration and conformational rearrangement of adsorbed protein residues at the air-water interface. Differences in the interaction magnitude, both in solution and at the interface vicinity, and in the adsorption rheokinetic parameters were observed in MWP/XG mixed systems depending on the protein type (beta-LG or WPC) and biopolymer relative concentration. beta-LG adsorption in XG presence could be promoted by mechanisms based on biopolymer segregative interactions and thermodynamic incompatibility in the interface vicinity, resulting in better surface and viscoelastic properties. The same mechanism could be responsible of WPC interfacial adsorption in the presence of XG. The interfacial functionality of WPC was improved by the synergistic interactions with XG, although WPC chemical complexity might complicate the elucidation of molecular events that govern adsorption dynamics of WPC/XG mixed systems at the air-water interface. Copyright (c) 2010 Elsevier B.V. All rights reserved.

  3. Guar gum succinate-sodium alginate beads as a pH-sensitive carrier for colon-specific drug delivery.

    PubMed

    Seeli, D Sathya; Dhivya, S; Selvamurugan, N; Prabaharan, M

    2016-10-01

    Guar gum succinate - sodium alginate (GGS-SA) beads cross-linked with barium ions were prepared and characterized as a pH sensitive carrier for colon-specific drug delivery. The structure of GGS-SA beads was confirmed by FT-IR spectroscopy. Scanning Electron Microscope (SEM) studies revealed that the drug loaded GGS-SA beads prepared using 2:2 (w/v) weight percent of GGS and SA had a diameter about 1.4mm and roughly spherical in shape. X-ray diffraction (XRD) studies showed that the peaks corresponding to GGS and SA at 13.5°, 17.5°, 20.2° and 13.5°, 22°, 24.1°, respectively were destroyed in GGS-SA beads which show that these beads are more amorphous in nature. Swelling studies demonstrated the pH-dependent swelling behavior of GGS-SA beads. The beads showed higher swelling degrees in pH 7.4 than that in pH 1.2 due to the existence of anionic groups in the polymer chains. The drug release study showed that the amount of model drug, ibuprofen, released from the GGS-SA beads was higher in pH 7.4 than that in pH 1.2 due to the pH-dependent swelling behavior of the beads. MTT assay revealed that GGS-SA beads at a concentration range of 0-30μg/ml had no cytotoxic effect on the cultured mouse mesenchymal stem cells (C3H10T1/2). These results suggest that GGS-SA beads can be used as effective colon-specific drug delivery system with pH-dependent drug release ability. Copyright © 2016 Elsevier B.V. All rights reserved.

  4. Biophysical characterization of the outer membrane polysaccharide export protein and the polysaccharide co-polymerase protein from Xanthomonas campestris.

    PubMed

    Bianco, M I; Jacobs, M; Salinas, S R; Salvay, A G; Ielmini, M V; Ielpi, L

    2014-09-01

    This study investigated the structural and biophysical characteristics of GumB and GumC, two Xanthomonas campestris membrane proteins that are involved in xanthan biosynthesis. Xanthan is an exopolysaccharide that is thought to be a virulence factor that contributes to bacterial in planta growth. It also is one of the most important industrial biopolymers. The first steps of xanthan biosynthesis are well understood, but the polymerization and export mechanisms remain unclear. For this reason, the key proteins must be characterized to better understand these processes. Here we characterized, by biochemical and biophysical techniques, GumB, the outer membrane polysaccharide export protein, and GumC, the polysaccharide co-polymerase protein of the xanthan biosynthesis system. Our results suggested that recombinant GumB is a tetrameric protein in solution. On the other hand, we observed that both native and recombinant GumC present oligomeric conformation consistent with dimers and higher-order oligomers. The transmembrane segments of GumC are required for GumC expression and/or stability. These initial results provide a starting point for additional studies that will clarify the roles of GumB and GumC in the xanthan polymerization and export processes and further elucidate their functions and mechanisms of action. Copyright © 2014 Elsevier Inc. All rights reserved.

  5. The effect of guar gum addition to a semisolid meal on appetite related to blood glucose, in dieting men.

    PubMed

    Kovacs, E M R; Westerterp-Plantenga, M S; Saris, W H M; Melanson, K J; Goossens, I; Geurten, P; Brouns, F

    2002-08-01

    To investigate whether addition of modified guar gum (GG) to a low-energy semisolid meal might be effective on appetite by modifying the response of blood glucose and other blood parameters. Three intervention periods of 2 weeks each, separated by washout periods of 4 weeks. Randomized and cross-over design. Fifteen overweight male subjects (mean+/-s.d.; age, 44+/-9 y; body mass index, 28.6+/-1.8 kg/m(2)). Subjects consumed a low-energy diet divided over three times a day, consisting of a semisolid meal with (SSM+) or without (SSM) addition of 2.5 g GG, or a solid meal (SM) with the same energy content (947 kJ) and macronutrient composition, plus a dinner of the subject's own choice. At the end of each intervention, time and number of meal initiations, dynamics of blood glucose and other blood parameters, and appetite ratings such as hunger and satiety were determined in a time-blinded situation. The changes in blood glucose from meal initiation to blood glucose peak and from peak to nadir were smaller with SSM+ and SM compared to SSM. Satiety before the third meal was higher with SSM+ and SM compared to SSM (P<0.01). Meal pattern, general appetite and total energy intake were similar for all treatments. We conclude that, similar to SM, SSM+ resulted in a more moderate change in blood glucose compared to SSM and positively affected satiety before the third meal, while general appetite, total energy intake and meal pattern did not differ.

  6. Enhancement of Oxygen Mass Transfer and Gas Holdup Using Palm Oil in Stirred Tank Bioreactors with Xanthan Solutions as Simulated Viscous Fermentation Broths

    PubMed Central

    Mohd Sauid, Suhaila; Huey Ling, Tan; Veluri, Murthy V. P. S.

    2013-01-01

    Volumetric mass transfer coefficient (k L a) is an important parameter in bioreactors handling viscous fermentations such as xanthan gum production, as it affects the reactor performance and productivity. Published literatures showed that adding an organic phase such as hydrocarbons or vegetable oil could increase the k L a. The present study opted for palm oil as the organic phase as it is plentiful in Malaysia. Experiments were carried out to study the effect of viscosity, gas holdup, and k L a on the xanthan solution with different palm oil fractions by varying the agitation rate and aeration rate in a 5 L bench-top bioreactor fitted with twin Rushton turbines. Results showed that 10% (v/v) of palm oil raised the k L a of xanthan solution by 1.5 to 3 folds with the highest k L a value of 84.44 h−1. It was also found that palm oil increased the gas holdup and viscosity of the xanthan solution. The k L a values obtained as a function of power input, superficial gas velocity, and palm oil fraction were validated by two different empirical equations. Similarly, the gas holdup obtained as a function of power input and superficial gas velocity was validated by another empirical equation. All correlations were found to fit well with higher determination coefficients. PMID:24350269

  7. Enhancement of oxygen mass transfer and gas holdup using palm oil in stirred tank bioreactors with xanthan solutions as simulated viscous fermentation broths.

    PubMed

    Mohd Sauid, Suhaila; Krishnan, Jagannathan; Huey Ling, Tan; Veluri, Murthy V P S

    2013-01-01

    Volumetric mass transfer coefficient (kLa) is an important parameter in bioreactors handling viscous fermentations such as xanthan gum production, as it affects the reactor performance and productivity. Published literatures showed that adding an organic phase such as hydrocarbons or vegetable oil could increase the kLa. The present study opted for palm oil as the organic phase as it is plentiful in Malaysia. Experiments were carried out to study the effect of viscosity, gas holdup, and kLa on the xanthan solution with different palm oil fractions by varying the agitation rate and aeration rate in a 5 L bench-top bioreactor fitted with twin Rushton turbines. Results showed that 10% (v/v) of palm oil raised the kLa of xanthan solution by 1.5 to 3 folds with the highest kLa value of 84.44 h(-1). It was also found that palm oil increased the gas holdup and viscosity of the xanthan solution. The kLa values obtained as a function of power input, superficial gas velocity, and palm oil fraction were validated by two different empirical equations. Similarly, the gas holdup obtained as a function of power input and superficial gas velocity was validated by another empirical equation. All correlations were found to fit well with higher determination coefficients.

  8. Enhanced Amendment Delivery to Low Permeability Zones for Chlorinated Solvent Source Area Bioremediation

    DTIC Science & Technology

    2014-09-01

    suspend manganese dioxide particles produced from oxidation of permanganate in aqueous phase (Crimi and Ko, 2009). Xanthan gum is a biopolymer that...shear-thinning fluids for improving treatment of low-k zones. This study established that combinations of xanthan gum and potassium permanganate ...flow cell experiments using xanthan gum solution to deliver permanganate , Chokejaroenrat et al. (2013, 2014) presented a set of data supporting that

  9. Guar-pasta: a new diet for obese subjects?

    PubMed

    Tognarelli, M; Miccoli, R; Giampietro, O; Cerri, M; Navalesi, R

    1986-01-01

    A pasta containing 10% guar-flour was successfully prepared and administered to ten obese women in a seven-day experimental design which included: a control meal (day 1) containing alimentary wheat-pasta, a first guar-pasta meal (day 2), to assess the acute effects of guar-pasta, a second guar-pasta meal (day 7), performed after four days of a weight-maintenance diet containing one guar-pasta meal per day. Compared to wheat-pasta, guar-pasta significantly lowered glucose and insulin response, as well as fasting total cholesterol. Moreover, it had excellent palatability and no gastrointestinal side-effects.

  10. Polyacrylamide Ferrogels with Magnetite or Strontium Hexaferrite: Next Step in the Development of Soft Biomimetic Matter for Biosensor Applications

    PubMed Central

    Safronov, Alexander P.; Mikhnevich, Ekaterina A.; Blyakhman, Felix A.; Sklyar, Tatyana F.; Larrañaga Varga, Aitor; Medvedev, Anatoly I.; Fernández Armas, Sergio

    2018-01-01

    Magnetic biosensors are an important part of biomedical applications of magnetic materials. As the living tissue is basically a “soft matter.” this study addresses the development of ferrogels (FG) with micron sized magnetic particles of magnetite and strontium hexaferrite mimicking the living tissue. The basic composition of the FG comprised the polymeric network of polyacrylamide, synthesized by free radical polymerization of monomeric acrylamide (AAm) in water solution at three levels of concentration (1.1 M, 0.85 M and 0.58 M) to provide the FG with varying elasticity. To improve FG biocompatibility and to prevent the precipitation of the particles, polysaccharide thickeners—guar gum or xanthan gum were used. The content of magnetic particles in FG varied up to 5.2 wt % depending on the FG composition. The mechanical properties of FG and their deformation in a uniform magnetic field were comparatively analyzed. FG filled with strontium hexaferrite particles have larger Young’s modulus value than FG filled with magnetite particles, most likely due to the specific features of the adhesion of the network’s polymeric subchains on the surface of the particles. FG networks with xanthan are stronger and have higher modulus than the FG with guar. FG based on magnetite, contract in a magnetic field 0.42 T, whereas some FG based on strontium hexaferrite swell. Weak FG with the lowest concentration of AAm shows a much stronger response to a field, as the concentration of AAm governs the Young’s modulus of ferrogel. A small magnetic field magnetoimpedance sensor prototype with Co68.6Fe3.9Mo3.0Si12.0B12.5 rapidly quenched amorphous ribbon based element was designed aiming to develop a sensor working with a disposable stripe sensitive element. The proposed protocol allowed measurements of the concentration dependence of magnetic particles in gels using magnetoimpedance responses in the presence of magnetite and strontium hexaferrite ferrogels with xanthan. We

  11. Improvement on the freeze-thaw stability of corn starch gel by the polysaccharide from leaves of Corchorus olitorius L.

    PubMed

    Yamazaki, Eiji; Sago, Toru; Kasubuchi, Yoshiaki; Imamura, Kazuhito; Matsuoka, Toshio; Kurita, Osamu; Nambu, Hironobu; Matsumura, Yasuki

    2013-04-15

    Effect of the polysaccharide from leaves of Corchorus olitorius L. (PLC) on the freeze-thaw (FT) stability of corn starch gel was studied. PLC was incorporated into the starch gel at 0.7% and total solid was adjusted to 6.0%. The syneresis was measured by the centrifugal-filtration method and, as a result, addition of PLC reduced effectively the syneresis of the starch gel even after 5 FT cycles, which was less than one third that of the normal starch gel. The rheological changes of the starch/PLC gel during the FT treatments were evaluated while the gel remained on the rheometer plate. The starch/PLC gel had less significant changes in the rheological parameters during the FT cycles than starch/guar gum or xanthan gum gel systems. SEM images showed that PLC stabilized the gel matrix surrounding pores, which would contribute to both a lower syneresis production and a higher stability in the rheological behavior at FT. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. Enhanced removal of methylene blue and methyl violet dyes from aqueous solution using a nanocomposite of hydrolyzed polyacrylamide grafted xanthan gum and incorporated nanosilica.

    PubMed

    Ghorai, Soumitra; Sarkar, Asish; Raoufi, Mohammad; Panda, Asit Baran; Schönherr, Holger; Pal, Sagar

    2014-04-09

    The synthesis and characterization of a novel nanocomposite is reported that was developed as an efficient adsorbent for the removal of toxic methylene blue (MB) and methyl violet (MV) from aqueous solution. The nanocomposite comprises hydrolyzed polyacrylamide grafted onto xanthan gum as well as incorporated nanosilica. The synthesis exploits the saponification of the grafted polyacrylamide and the in situ formation of nanoscale SiO2 by a sol-gel reaction, in which the biopolymer matrix promotes the silica polymerization and therefore acts as a novel template for nanosilica formation. The detailed investigation of the kinetics and the adsorption isotherms of MB and MV from aqueous solution showed that the dyes adsorb rapidly, in accordance with a pseudo-second-order kinetics and a Langmuir adsorption isotherm. The entropy driven process was furthermore found to strongly depend on the point of zero charge (pzc) of the adsorbent. The remarkably high adsorption capacity of dyes on the nanocomposites (efficiency of MB removal, 99.4%; maximum specific removal Qmax, 497.5 mg g(-1); and efficiency of MV removal, 99.1%; Qmax, 378.8 mg g(-1)) is rationalized on the basis of H-bonding interactions as well as dipole-dipole and electrostatic interactions between anionic adsorbent and cationic dye molecules. Because of the excellent regeneration capacity the nanocomposites are considered interesting materials for the uptake of, for instance, toxic dyes from wastewater.

  13. [How much does partially hydrolyzed guar gum affect the weight, moisture and hardness of feces?].

    PubMed

    Sakata, Yukiko; Shimbo, Shinichiro

    2006-04-01

    The ministry of Health, Labor and Welfare recommends Japanese people to intake a certain amount of dietary fiber, believing that incorporating more dietary fiber into our diet can reduce the risk of colorectal cancer. The present study aimed to demonstrate and confirm the theory's validity by applying it to reality-to what extent is the intake of partially hydrolyzed guar gum (PHGG) useful in promoting bowel movements, and what problems are involved? We therefore investigated to what extent PHGG affects the weight, moisture and hardness of feces when healthy female students consumed PHGG as a supplement. During two fourteen-day sessions in spring and autumn, 9 healthy female students took the same diets. During the first session, the students were provided a strict dietary formula, while during the second session, they were administered an amount of 12.5 g/day PHGG (purity 80%, equivalent to 10 g of dietary fiber) dissolved in adequate amount of water at the end of each meal. Feces of the subjects were collected and weighted just after defection. A moisture meter was used to measure fecal moisture and a rheometer was used to measure fecal hardness. Fecal conditions and intestinal motility were also examined. (1) Due to the PHGG intake, the fecal bulk increased in 4 subjects and decreased in 2 subjects, significantly, out of 9. (2) Due to the PHGG intake, the fecal condition softened in 3 subjects while significantly hardening in 4 subjects. (3) The PHGG intake induced an increased of fecal moisture in 5 subjects, while moisture decreased in 2 subjects. (4) Fecal hardness measured more than 150 g/cm when it is classified as "frozen hard". (5) A significant inverse correlation could be seen between fecal hardness and fecal bulk, and between fecal hardness and its moisture. When PHGG was administered a significant inverse correlation could be seen between fecal hardness and its moisture. The conclusion is that the PHGG intake resulted in increase of the fecal bulk for

  14. Entrapment of anaerobic thermophilic and hyperthermophilic marine micro-organisms in a gellan/xanthan matrix.

    PubMed

    Landreau, M; Duthoit, F; Claeys-Bruno, M; Vandenabeele-Trambouze, O; Aubry, T; Godfroy, A; Le Blay, G

    2016-06-01

    The aims of this study were (i) to develop a protocol for the entrapment of anaerobic (hyper)thermophilic marine micro-organisms; (ii) to test the use of the chosen polymers in a range of physical and chemical conditions and (iii) to validate the method with batch cultures. The best conditions for immobilization were obtained at 80°C with gellan and xanthan gums. After 5-week incubation, beads showed a good resistance to all tested conditions except those simultaneously including high temperature (100°C), low NaCl (<0∙5 mol l(-1) ) and extreme pH (4/8). To confirm the method efficiency, batch cultures with immobilized Thermosipho sp. strain AT1272 and Thermococcus kodakarensis strain KOD1 showed an absence of detrimental effect on cell viability and a good growth within and outside the beads. This suggests that entrapment in a gellan-xanthan matrix could be employed for the culture of anaerobic (hyper)thermophilic marine micro-organisms. (Hyper)thermophilic marine micro-organisms possess a high biotechnological potential. Generally microbial cells are grown as free-cell cultures. The use of immobilized cells may offer several advantages such as protection against phage attack, high cell biomass and better production rate of desired metabolites. © 2016 The Society for Applied Microbiology.

  15. Chitosan-guar gum-silver nanoparticles hybrid matrix with immobilized enzymes for fabrication of beta-glucan and glucose sensing photometric flow injection system.

    PubMed

    Bagal-Kestwal, Dipali R; Kestwal, Rakesh Mohan; Hsieh, Wen-Ting; Chiang, Been-Huang

    2014-01-01

    Simple and fast photometric flow injection analysis system was developed for sensing of β-1,3-glucan from medicinal mushroom Ganoderma lucidum during fermentation. For this purpose, the chitosan-guar gum-silver nanoparticle-beta glucanase (Ch-GG-AgNPs-βG) beads and Ch-GG-AgNPs-GOD (glucose oxidase) beads were prepared. The bead packed mini-columns were then used to assemble a flow injection analysis (FIA) system for the detection of β-(1→3)-d-glucan biomarker or glucose. This colorimetric flow system can detect glucose and glucan with detection limits as low as 50ngmL(-1) and 100ngmL(-1) (S/N=3), respectively. The analysis time of this FIA was approximately 40s, which is faster than the previously reported glucan sensors. The glucose and glucan calibration curves were obtained in the range of 0.25-1.25μgmL(-1) (R(2)=0.988) and 0.2-1.0μgmL(-1)(R(2)=0.979), respectively. The applicability of the nano-bio-composite FIA sensor system for spiked and real β-(1→3)-d-glucan samples were tested, and the accuracy of the results were greater than 95%. Thus, the designed FIA provides a simple, interference free and rapid tool for monitoring glucose and β-glucan content, which can be used for various food samples with a little modification. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. Evaluation of Permeable Reactive Barrier Performance

    DTIC Science & Technology

    2002-12-09

    and-fill operation, where the trench was initially stabilized using guar gum and subsequently broken down by circulating an enzyme through the trench...80 Peerless Reactive cell placed within gravel-filled capture trench, guar gum used during installation Uranium Mill Tailings Site...Regulatory Issues 5.3.1 Biostat. The use of guar gum (a natural food thickener) as a reactive medium or as a support for trench excavation, is gaining

  17. Development and evaluation of natural gum-based extended release matrix tablets of two model drugs of different water solubilities by direct compression.

    PubMed

    Ofori-Kwakye, Kwabena; Mfoafo, Kwadwo Amanor; Kipo, Samuel Lugrie; Kuntworbe, Noble; Boakye-Gyasi, Mariam El

    2016-01-01

    The study was aimed at developing extended release matrix tablets of poorly water-soluble diclofenac sodium and highly water-soluble metformin hydrochloride by direct compression using cashew gum, xanthan gum and hydroxypropylmethylcellulose (HPMC) as release retardants. The suitability of light grade cashew gum as a direct compression excipient was studied using the SeDeM Diagram Expert System. Thirteen tablet formulations of diclofenac sodium (∼100 mg) and metformin hydrochloride (∼200 mg) were prepared with varying amounts of cashew gum, xanthan gum and HPMC by direct compression. The flow properties of blended powders and the uniformity of weight, crushing strength, friability, swelling index and drug content of compressed tablets were determined. In vitro drug release studies of the matrix tablets were conducted in phosphate buffer (diclofenac: pH 7.4; metformin: pH 6.8) and the kinetics of drug release was determined by fitting the release data to five kinetic models. Cashew gum was found to be suitable for direct compression, having a good compressibility index (ICG) value of 5.173. The diclofenac and metformin matrix tablets produced generally possessed fairly good physical properties. Tablet swelling and drug release in aqueous medium were dependent on the type and amount of release retarding polymer and the solubility of drug used. Extended release of diclofenac (∼24 h) and metformin (∼8-12 h) from the matrix tablets in aqueous medium was achieved using various blends of the polymers. Drug release from diclofenac tablets fitted zero order, first order or Higuchi model while release from metformin tablets followed Higuchi or Hixson-Crowell model. The mechanism of release of the two drugs was mostly through Fickian diffusion and anomalous non-Fickian diffusion. The study has demonstrated the potential of blended hydrophilic polymers in the design and optimization of extended release matrix tablets for soluble and poorly soluble drugs by direct

  18. Experimental investigation of heat transfer characteristics of guar-based polymer solutions and gels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Azouz, I.; Vinod, P.S.; Shah, S.N.

    1996-12-31

    An experimental investigation of the heat transfer characteristics of hydraulic fracturing fluids was conducted at the Fracturing Fluid Characterization Facility (FFCF) of the University of Oklahoma. The facility is equipped with a high pressure fracture simulator, coiled tubing fluid pre-conditioning system, and a full-scale, counter-current, double pipe heat exchanger. The fluids investigated include non-crosslinked and borate-crosslinked guar gum and hydroxypropyl guar (HPG). Results were also obtained for water and were used as a basis for comparison. The effects of flow rate, operating temperature, pH, and various levels of shear pre-conditioning, on the heat transfer behavior of the test fluids weremore » investigated. Results show a significant difference between the heat transfer coefficient of the pure solvent (water) and those of the polymer solutions tested. While all polymer solutions tested exhibited lower heat transfer coefficients than that of the pure solvent, crosslinking appears to enhance the heat transfer characteristics of the polymer fluids. It was also observed that shear preconditioning does not seem to have a significant effect on the heat transfer coefficient of the crosslinked gels. These findings are of great interest to the industry, especially to the petroleum industry where these fluids are commonly used during hydraulic fracturing of hydrocarbon reservoirs.« less

  19. An Experimental Study of Polymer Drag Reduction and Boundary Layer Diffusion Characteristics for Incompressible Flow Over a Flat Plate.

    DTIC Science & Technology

    1979-08-15

    well industry with the use of the plant derivative, Guar Gum . Solutions of the product were used to suspend sand in the high-pressure, sand-water...Polymer Concentration (WPP.) Gum Karaya 850 Guar 400 Polyacrylamide, Polyhall-250 20 Polyox WSR-301 10 Hoyt and Fabula (1964) and Virk (1971) present data...achieved by Elata, Lehner, and Kahanovity (1966) for Guar Gum solutions and Meyer (1966) and Wells (1965) for Polyox. Many authors have described drag

  20. The Effect of Polymer Additives on the Cavitation Threshold of Water

    DTIC Science & Technology

    1982-02-01

    AeSTRACT (Continue an reverse side it necesary and fdmflo bp WeekB nimwot) The effect of the polymer additives Polyox and Guar Gum on the acousticI...and different concentrations of Polyox and Guar Gum at variousI dissolved oxygen concentrations, using an ultrasonic technique. In this study, poor...of the polymer additives Polyox and Guar Gum on the acoustic cavitation threshold of water was studied as a function of polymer concentration and

  1. Incorporation of beads into oral films for buccal and oral delivery of bioactive molecules.

    PubMed

    Castro, Pedro M; Sousa, Flávia; Magalhães, Rui; Ruiz-Henestrosa, Victor Manuel Pizones; Pilosof, Ana M R; Madureira, Ana Raquel; Sarmento, Bruno; Pintado, Manuela E

    2018-08-15

    The association of alginate beads and guar-gum films in a single delivery system was idealized to promote a more effective buccal and oral delivery of bioactive molecules. A response surface method (experimental design approach) was performed to obtain optimal formulations of alginate beads to be incorporated into guar gum oral films as combined buccal and oral delivery systems for caffeine delivery. The combined formulation was further characterized regarding physicochemical properties, drug release, cell viability and buccal permeability. Beads average size, determined by dynamic light scattering (DLS), was of 3.37 ± 6.36 μm. Film thickness was set to 62 μm. Scanning electron microscopy micrographs revealed that beads were evenly distributed onto the film matrix and beads size was in accordance to data obtained from DLS analysis. Evaluation of Fourier-transform infrared spectra did not indicate the formation of new covalent bonds between the matrix of guar-gum films, alginate beads and caffeine. In vitro release assays by dialysis membrane allowed understanding that the combination of guar-gum films and alginate beads assure a slower release of caffeine when compared with the delivery profile of free caffeine from alginate beads or guar-gum films alone. MTT assay, performed on human buccal carcinoma TR146 cell line, allowed concluding that neither guar-gum film, alginate beads nor guar-gum film incorporated into alginate beads significantly compromised cell viability after 12 h of exposure. As demonstrated by in vitro permeability assay using TR146 human buccal carcinoma cell lines, combination of guar-gum films and alginate beads also promoted a slower release and, thus, lower apparent permeability (1.15E-05 ± 3.50E-06) than for caffeine solution (2.68E-05 ± 7.30E-06), guar-gum film (3.12E-05 ± 4.70E-06) or alginate beads (2.01E-05 ± 3.90E-06). The conjugation of alginate beads within an orodispersible film matrix represents an

  2. Gums induced microstructure stability in Ca(II)-alginate beads containing lactase analyzed by SAXS.

    PubMed

    Traffano-Schiffo, Maria Victoria; Castro-Giraldez, Marta; Fito, Pedro J; Perullini, Mercedes; Santagapita, Patricio R

    2018-01-01

    Previous works show that the addition of trehalose and gums in β-galactosidase (lactase) Ca(II)-alginate encapsulation systems improved its intrinsic stability against freezing and dehydration processes in the pristine state. However, there is no available information on the evolution in microstructure due to the constraints imposed by the operational conditions. The aim of this research is to study the time course of microstructural changes of Ca(II)-alginate matrices driven by the presence of trehalose, arabic and guar gums as excipients and to discuss how these changes influence the diffusional transport (assessed by LF-NMR) and the enzymatic activity of the encapsulated lactase. The structural modifications at different scales were assessed by SAXS. The incorporation of gums as second excipients induces a significant stabilization in the microstructure not only at the rod scale, but also in the characteristic size and density of alginate dimers (basic units of construction of rods) and the degree of interconnection of rods at a larger scale, improving the performance in terms of lactase activity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Acute effects of different dietary polysaccharides added in milk on food intake, postprandial appetite and glycemic responses in healthy young females.

    PubMed

    Arshad, Muhammad Umair; Ishtiaq, Saima; Anjum, Faqir Muhammad; Saeed, Farhan; Chatha, Shahzad Ali Shahid; Imran, Ali

    2016-09-01

    In the present study we compared the postprandial glycemic and satiety responses of different dietary polysaccharides when added in milk (2% M.F.). The objective of this study was to evaluate different polysaccharides against postprandial glucose, appetite responses and food intake at subsequent meal. In a repeated measures design, 30 females (18-30 years) consumed 250 ml milk 2% M.F. (control), or milk with carrageenan (2.5 g), guar gum (2.5 g) and alginate (2.5 g), followed by an ad libitum pizza meal after 120 min. Alginate and guar gum addition resulted in lower caloric intake at subsequent pizza meal. The post-treatment (0-120 min) glucose and average appetite were suppressed by alginate and guar gum (p < 0.0001), with more pronounced effect of guar gum. However, alginate resulted in lower blood glucose (p < 0.0001) compared with control and carrageenan during post-treatment. Alginate and guar gum added beverages would be beneficial in short-term regulation of postprandial glycemia and satiety.

  4. Use of guar by-products in high-production laying hen diets.

    PubMed

    Gutierrez, O; Zhang, C; Cartwright, A L; Carey, J B; Bailey, C A

    2007-06-01

    A 5x5 Latin square experiment was conducted to evaluate the effect of feeding low concentrations of guar germ or a combination of guar germ and hull (guar meal) in high-production laying hen diets. A total of 125 Lohmann laying hens (21 wk old) of similar BW were randomly assigned to 5 blocks. Each block was divided into 5 experimental units, consisting of 5 hens per unit. Hens were fed either a nonguar control diet, or 1 of 4 diets containing either 2.5 or 5% guar germ, or 2.5 or 5% guar meal over a 20-wk trial period (five 4-wk periods). No significant differences were observed when feeding either 2.5 or 5% guar germ or meal (P>0.05) on hen-day egg production or feed consumption. Significant differences in egg weight, total egg mass per hen, and feed conversion ratio were detected in hens fed 2.5% guar meal, whereas they remained unchanged for diets containing either level of guar germ or 5% guar meal. Feeding either level of guar germ or guar meal did not affect shell quality (shell thickness, egg breaking force, and specific gravity), Haugh units, or egg yolk color (L*, a*, b*). The results showed that both guar germ and guar meal can be fed to high-production laying hens at up to 5% without adverse effects on laying hen performance.

  5. DARPA Advanced Cannon Propellant (ACP) Library User’s Guide. Appendix F. Patents Dealing with Fluid Propellant Technology

    DTIC Science & Technology

    1981-06-15

    tallisation temperature were added 0.4 parts of hydrox- mannitol, and 15.0 parts coarse aluminium powder were ypropylated guar gum which was allowed to...3.0 parts of8 15 coarse aluminium powder , 0.5 parts of hydroxy- propylated guar gum , 0.2 parts of zinc chromate and A slurry was prepared by the mixing...4 molecules of ethylene oxide), 10 parts of foaming agent and entrapped air bubbles into the comn- coarse aluminium powder , 0.7 parts of guar gum

  6. Encapsulation of lead from hazardous CRT glass wastes using biopolymer cross-linked concrete systems.

    PubMed

    Kim, Daeik; Quinlan, Michael; Yen, Teh Fu

    2009-01-01

    Discarded computer monitors and television sets are identified as hazardous materials due to the high content of lead in their cathode ray tubes (CRTs). Over 98% of lead is found in CRT glass. More than 75% of obsolete electronics including TV and CRT monitors are in storage because appropriate e-waste management and remediation technologies are insufficient. Already an e-waste tsunami is starting to roll across the US and the whole world. Thus, a new technology was developed as an alternative to current disposal methods; this method uses a concrete composite crosslinked with minute amounts of biopolymers and a crosslinking agent. Commercially available microbial biopolymers of xanthan gum and guar gum were used to encapsulate CRT wastes, reducing Pb leachability as measured by standard USEPA methods. In this investigation, the synergistic effect of the crosslinking reaction was observed through blending two different biopolymers or adding a crosslinking agent in biopolymer solution. This CRT-biopolymer-concrete (CBC) composite showed higher compressive strength than the standard concrete and a considerable decrease in lead leachability.

  7. Role of synbiotics in polysaccharide assisted colon targeted microspheres of mesalamine for the treatment of ulcerative colitis.

    PubMed

    Kaur, Rupinderjeet; Gulati, Monica; Singh, Sachin Kumar

    2017-02-01

    The present study explains the effect of concomitant administration of synbiotics with the polysaccharide based colon targeted delivery system. As the gut microflora get deranged on administration of mesalamine, drug release from such delivery systems is expected to be jeopardised because the release trigger is dependent solely on the colonic microbiota. To overcome this limitation, mesalamine was formulated as microspheres with guar gum and xanthan gum (prebiotics). These were combined with probiotics containing Lactobacillus acidophilus, L. rhamnosus, Bifidobacterium longumand Saccharomyces boulardi. Dissolution studies of the prepared formulation conducted in simulated colonic fluid clearly demonstrated its superiority over the marketed, delayed release dosage forms of mesalamine. The therapeutic benefit of the concomitant administration of synbiotic with mesalamine was evidenced by the comparative evaluation of faecal contents, weight gain trend and histopathological studies conducted in rats. The results suggest that co-administration of synbiotics with mesalamine can be used as a convenient methodology to achieve efficient and cost-effective targeting of the drug to colon. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Encapsulation of lead from hazardous CRT glass wastes using biopolymer cross-linked concrete systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kim, Daeik; Quinlan, Michael; Yen, Teh Fu

    2009-01-15

    Discarded computer monitors and television sets are identified as hazardous materials due to the high content of lead in their cathode ray tubes (CRTs). Over 98% of lead is found in CRT glass. More than 75% of obsolete electronics including TV and CRT monitors are in storage because appropriate e-waste management and remediation technologies are insufficient. Already an e-waste tsunami is starting to roll across the US and the whole world. Thus, a new technology was developed as an alternative to current disposal methods; this method uses a concrete composite crosslinked with minute amounts of biopolymers and a crosslinking agent.more » Commercially available microbial biopolymers of xanthan gum and guar gum were used to encapsulate CRT wastes, reducing Pb leachability as measured by standard USEPA methods. In this investigation, the synergistic effect of the crosslinking reaction was observed through blending two different biopolymers or adding a crosslinking agent in biopolymer solution. This CRT-biopolymer-concrete (CBC) composite showed higher compressive strength than the standard concrete and a considerable decrease in lead leachability.« less

  9. Effects of a beverage containing an enzymatically induced-viscosity dietary fiber, with or without fructose, on the postprandial glycemic response to a high glycemic index food in humans.

    PubMed

    Wolf, B W; Wolever, T M S; Lai, C S; Bolognesi, C; Radmard, R; Maharry, K S; Garleb, K A; Hertzler, S R; Firkins, J L

    2003-09-01

    Dietary supplementation with guar gum or fructose has been reported to reduce the postprandial glycemic response to an oral glucose challenge. As a result of the poor palatability of most foods containing guar gum, a novel low-viscosity beverage with guar gum was developed that becomes viscous in vivo through an enzymatic induction. The primary study objective was to determine the effect of an amylase-induced viscosity (I-V) product, with or without supplemental fructose, on the postprandial glycemic response to a high glycemic index test meal in healthy nondiabetic subjects. The study was a four-treatment, placebo-controlled, double-blind, randomized block protocol. The study was performed at Glycaemic Index Testing, Inc., Toronto, Ontario, Canada. A total of 30 healthy nondiabetic volunteers (13 male, 17 female, mean+/-s.e.m. age of 51+/-3 y and body mass index of 24.2+/-0.4 kg/m(2)) participated in the study. In the morning after an overnight fast, subjects participated in four 3-h meal glucose tolerance tests on separate occasions. The test meals contained 50 g of available carbohydrate from maltodextrin and white bread (control) or the same meal with either 5 g of guar gum (3.6 g galactomannan), 5 g of fructose, or 5 g of guar gum +5 g of fructose. Treatments containing guar gum had a reduced (P<0.01) baseline-adjusted peak glucose response and incremental area under the glucose curve. In contrast to previous studies, fructose increased (P<0.05) the baseline-adjusted peak glucose concentration. Guar gum incorporated into an amylase I-V product provided a means to stabilize blood glucose levels by reducing the early phase excursion and then by appropriately maintaining the later phase excursion in healthy nondiabetic humans.

  10. Green synthesis of xanthan conformation-based silver nanoparticles: antibacterial and catalytic application.

    PubMed

    Xu, Wei; Jin, Weiping; Lin, Liufeng; Zhang, Chunlan; Li, Zhenshun; Li, Yan; Song, Rong; Li, Bin

    2014-01-30

    Silver nanoparticles (Ag NPs) were green synthetized using xanthan gum (XG) dissolved in water as reducing and capping agent for the first time. The structure, morphology, and size of Ag NPs in XG aqueous solutions were investigated with UV-vis spectroscopy, transmission electron microscopy and Fourier transform infrared. The results indicated Ag NPs were integrated successfully in the XG matrix and the optical properties and morphology of Ag NPs could be regulated by the synthesis condition. The aggregation of the XG-bonded Ag NPs increased with storage, whereas the size barely changed. The assemble behavior was related to the XG conformation transition of denaturation and renaturation. The one spot formed Ag NPs showed favorable antibacterial effect on Escherichia coli and Staphyloccocus aureus and excellent catalytic capability of 4-nitrophenol reduction. This work provided a feasible method to detect the biopolymer space structure transition through the intensity of metal nanoparticles labeled on the chain. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  11. Production of a Biopolymer at Reactor Scale: A Laboratory Experience

    ERIC Educational Resources Information Center

    Genc, Rukan; Rodriguez-Couto, Susana

    2011-01-01

    Undergraduate students of biotechnology became familiar with several aspects of bioreactor operation via the production of xanthan gum, an industrially relevant biopolymer, by "Xanthomonas campestris" bacteria. The xanthan gum was extracted from the fermentation broth and the yield coefficient and productivity were calculated. (Contains 2 figures.)

  12. Fish meal replacement by plant protein substitution and guar gum addition in trout feed. Part II: Effects on faeces stability and rheology.

    PubMed

    Brinker, Alexander; Friedrich, Christian

    2012-01-01

    In the explosively growing aquaculture industry, the challenge of sustainability includes a requirement to produce more fish than are consumed by stock. A promising avenue of research is the substitution of the fish meal in feeds with plant protein. However, there are inherent risks in the development of such feeds, and serious consideration should be given not only to nutritional content, but also to the mechanical quality of resulting faecal wastes. The present study uses a plate on plate rheometer running in different flow modes (creep, oscillation) to assess the rheological properties of wastes resulting from different diets.All faeces were shown to be thixotropic in nature, independent of diet composition. Details of dietary composition influence the consistency and the characteristic stresses at which faecal structure changes from a viscoelastic solid into a viscoelastic liquid. Furthermore, in linking active food components with mechanical properties of chyme faeces, rheological studies may be used to understand and counteract some problematic properties. Substituting 100% of fish meal with plant proteins leads to faeces that rapidly disintegrate into very fine solids which threaten the viability of aquacultural operations. Adding just 0.3% of the rapidly hydrating non-starch polysaccharide, guar gum (GG), significantly increased the viscosity and elastic modulus of the faeces. These mechanical improvements increase the size of the resulting particles and the effectiveness with which they can be removed, thereby leading to optimized water quality. GG addition was sufficiently effective to counter the stability and particle size effects of a 50% substitution of fish meal, but could not mitigate those of a 100% substitution, wherein dissolution effects of an unknown emulsifier are suspected.

  13. Suppressive effect of viscous dietary fiber on elevations of uric acid in serum and urine induced by dietary RNA in rats is associated with strength of viscosity.

    PubMed

    Koguchi, Takashi; Nakajima, Hisao; Koguchi, Hiromi; Wada, Masahiro; Yamamoto, Yuji; Innami, Satoshi; Maekawa, Akio; Tadokoro, Tadahiro

    2003-10-01

    This study was performed to clarify how dietary fiber (DF) with different viscosities would be associated with dietary RNA metabolism. Male Wistar strain rats, four weeks old, were fed diets containing a 3% (w/w) yeast RNA and a 5% (w/w) viscous DF for five days. Viscosity of DF samples used, in order of strength, were xanthan gum (XG) > guar gum (GG) > locust bean gum (LBG) > karaya gum (KG) > pectin (PE) = arabic gum (AG) > CM-cellulose (CMC) = inulin (IN). The serum uric acid concentration in the viscous DF groups significantly decreased as compared with that in the cellulose (CL) group. The urinary excretions of uric acid and allantoin in the respective groups given AG, GG, IN, KG, PE, and XG were significantly suppressed as compared with those in the CL group. The fecal RNA excretion was markedly increased in the IN, KG, PE, and XG groups in comparison to the CL group. The DF with high viscosity significantly suppressed RNA digestion by RNase A and decreased uptakes of 14C-labeled adenosine and adenosine 5'-monophosphate (5'-AMP) in rat jejunum. The results reveal that the suppressive effect of DF on elevation of serum uric acid concentration induced by dietary RNA in rats is associated with the strength of DF viscosity. The mechanism by which this is accomplished is suggested to be attributed to the inhibitions of digestion for dietary RNA and/or absorption of the hydrolyzed compounds.

  14. Improvement of physical properties of gluten-free steamed cake based on black waxy rice flour using different hydrocolloids.

    PubMed

    Itthivadhanapong, Pimchada; Jantathai, Srinual; Schleining, Gerhard

    2016-06-01

    This study aimed to compare the effects of 1 % addition of four selected hydrocolloids (xanthan, guar, hypdroxypropylmethylcellulose and carrageenan) on quality characteristics of batter and of black waxy rice steamed cake compared to a control without hydrocolloids. Dynamic frequency sweeps of the batters at 25 °C indicated that all formulations exhibited gel-like behaviour with storage moduli (G') higher than loss moduli (G″). Hydrocolloids increased the apparent viscosity and the thixotropic behaviour, depending on the type of hydrocolloids. Xanthan had the greatest effects on both moduli, whereas carrageenan had the smallest effects. During a storage period of 4 days the cakes with xanthan remained softer than control samples. The overall acceptability of cake with xanthan and guar were higher than control. This study is the first report on using black waxy rice flour as a main raw material in gluten free cake. The results of this study provided useful information for selection hydrocolloids as ingredients that can help to improve the physical properties of waxy rice steamed cake.

  15. Examination and Manipulation of Clay Aggregates - Initial Inquiry

    DTIC Science & Technology

    2011-06-06

    and the first conclusions in the examination and testing of clay aggregates composed of montmorillonite clay and a polysaccharide (xanthan gum, also...and the first conclusions in the examination and testing of clay aggregates composed of montmorillonite clay and a polysaccharide (xanthan gum, also...PSU and the X-gum content from 0% to 10% of the mineral content of the clay (by weight). Montmorillonite was used in all the suspensions prepared

  16. PELLETS AND PELLETIZATION: EMERGING TRENDS IN THE PHARMA INDUSTRY.

    PubMed

    Zaman, Muhammad; Saeed-Ul-Hassan, Syed; Sarfraz, Rai Muhammad; Batool, Nighat; Qureshi, Muhammad Junaid; Akram, Muhammad Abdullah; Munir, Saiqa; Danish, Zeeshan

    2016-11-01

    The present time is considered as an era of advancements in drug delivery systems. Different novel approaches are under investigation that range from uniparticulate to multi particulate system, macro to micro and nano particulate systems. Pelletization is one of the novel drug delivery technique that provides an effective way to deliver the drug in modified pattern. It is advantageous in providing site specific delivery of the drug. Drugs with unpleasant taste, poor bioavailability and short biological half-life can be delivered efficiently through pellets. Their reduced size makes them more valuable as compared to the conventional drug deliv- ery system. Different techniques are used to fabricate the pellets such as extrusion and spheronization, hot melt extrusion, powder layering, suspension or solution layering, freeze pelletization and pelletization by direct compression method. Various natural polymers including xanthan gum, guar gum, tragacanth and gum acacia, semisynthetic polymers like cellulose derivatives, synthetic polymers like derivatives of acrylamides, can be used in pellets formulation. Information provided in this review is collected from various national and intemational research articles, review articles and literature available in the books. The purpose of the current review is to discuss pellets, their characterizations, different techniques of pelletization and the polymers with potential of being suitable for pellets formulation.

  17. Effect of high hydrostatic pressure and high dynamic pressure on stability and rheological properties of model oil-in-water emulsions

    NASA Astrophysics Data System (ADS)

    Bigikocin, Erman; Mert, Behic; Alpas, Hami

    2011-09-01

    Both static and dynamic high pressure applications provide interesting modifications in food structures which lead to new product formulations. In this study, the effects of two different treatments, high hydrostatic pressure (HHP) and high dynamic pressure (HDP), on oil-in-water emulsions were identified and compared. Microfluidization was selected from among the HDP homogenization techniques. The performance of each process was analyzed in terms of rheological modifications and emulsion stability improvements compared with the coarse emulsions. The stability of the emulsions was determined comparatively by using an analytical photo-centrifuge device employing novel analysis technology. Whey protein isolate (WPI) in combination with a food polysaccharide (xanthan gum, guar gum or locust bean gum) were used as emulsifying and stabilizing ingredients. The effective disruption of oil droplets and the degradation of polysaccharides by the shear forces under high pressure in HDP microfluidization yielded finer emulsions with lower viscosities, leading to distinctive improvements in emulsion stability. On the other hand, improvements in stability obtained with HHP treatment were due to the thickening of the emulsions mainly induced by protein unfolding. The corresponding increases in viscosity were intensified in emulsion formulations containing higher oil content. Apart from these, HHP treatment was found to be relatively more contributive to the enhancements in viscoelastic properties.

  18. Application of simplex-centroid mixture design to optimize stabilizer combinations for ice cream manufacture.

    PubMed

    BahramParvar, Maryam; Tehrani, Mostafa Mazaheri; Razavi, Seyed M A; Koocheki, Arash

    2015-03-01

    This study aimed to obtain the optimum formulation for stabilizers in ice cream that could contest with blends presented nowadays. Thus, different mixtures of three stabilizers, i.e. basil seed gum, carboxymethyl cellulose, and guar gum, at two concentrations (0.15 % & 0.35 %) were studied using mixture design methodology. The influence of these mixtures on some properties of ice cream and the regression models for them were also determined. Generally, high ratios of basil seed gum in mixture developed the apparent viscosity of ice cream mixes and decreased the melting rate. Increasing proportion of this stabilizer as well as guar gum in the mixtures at concentration of 0.15 % enhanced the overrun of samples. Based on the optimization criteria, the most excellent combination was 84.43 % basil seed gum and 15.57 % guar gum at concentration of 0.15 %. This research proved the capability of basil seed gum as a novel stabilizer in ice cream stabilization.

  19. Development and Characterization of Nanoembedded Microparticles for Pulmonary Delivery of Antitubercular Drugs against Experimental Tuberculosis.

    PubMed

    Goyal, Amit Kumar; Garg, Tarun; Rath, Goutam; Gupta, Umesh Datta; Gupta, Pushpa

    2015-11-02

    The foremost objective of the present research study was to develop and evaluate the potential of rifampicin (RIF) and isoniazid (INH) loaded spray dried nanoembedded microparticles against experimental tuberculosis (TB). In this study, RIF-INH loaded various formulations (chitosan, guar gum, mannan, and guar gum coated chitosan) were prepared by spray drying and characterized on the basis of in vitro as well as in vivo studies. Results showed that guar gum spray dried particles showed uniform size distribution with smooth surface as compare to mannan formulations. Guar gum batches exhibited excellent flow ability attributed to their optimum moisture content and uniform size distribution. The drug release showed the biphasic pattern of release, i.e., initial burst followed by a sustained release pattern. The preferential uptake of guar gum coated formulations suggested the presence and selective uptake capability of mannose moiety to the specific cell surface of macrophages. In vivo lung distribution study showed that guar gum coated chitosan (GCNP) batches demonstrated prolonged residence at the target site and thereby improve the therapeutic utility of drug with a significant reduction in systemic toxicity. Optimized drug loaded GCNP formulation has resulted in almost 5-fold reduction of the number of bacilli as compared to control group. Histopathology study also demonstrated that none of the treated groups show any evidence of lung tissue abnormality. Hence, GCNPs could be a promising carrier for selective delivery of antitubercular drugs to alveolar macrophages with the interception of minimal side effects, for efficient management of TB.

  20. Structure influence on mechanical and acoustic properties of freeze-dried gels obtained with the use of hydrocolloids.

    PubMed

    Ciurzyńska, Agnieszka; Marzec, Agata; Mieszkowska, Arleta; Lenart, Andrzej

    2017-04-01

    The influence of the structure formed by the type of hydrocolloids (low-methoxyl pectin, the mixture of xanthan gum, and locust bean gum, and mixture of xanthan gum, and guar gum) and the aeration time (3, 5, 7, and 9 min) on textural properties of freeze-dried gels were investigated. The hardest texture generating the strongest acoustic emission was obtained by freeze-dried pectin gel, characterised by the lowest porosity and the largest pore diameter. Aeration time significantly affected mechanical and acoustic properties of the pectin gel lyophilisate. No effect of gel aeration time on tested characteristics of samples with mixture of hydrocolloids was observed. Strong positive correlations between acoustic energy as well as the maximum force and work and negative ones between porosity and pore diameter indicate that greater resilience and stronger acoustic emission of freeze-dried gels was caused by the reduction of porosity and the increase in the pore size of the material. The research is expected to show the phenomenon of structure formation when preparing and freeze-drying gels and explain the influence of the process parameters (time of aeration, the type of hydrocolloids) on the formation of the internal structure and physical properties of a dried product, especially mechanical and acoustic properties. This achievement will contribute to the development of the science of food and human nutrition, especially within the context of the popular research on aerated diet products. The expected result will be the ability to develop a new technology for producing food with a delicate texture, using the phenomenon of sublimation. As a result, designing changes in the structure of freeze-dried fruit gels with a delicate structure will be possible due to the choice of ingredients and aeration parameters in order to develop innovative food characterised by favorable nutritional, health and functional properties, which will be attractive for the consumers. © 2016

  1. The effect of addition of modified guar gum to a low-energy semisolid meal on appetite and body weight loss.

    PubMed

    Kovacs, E M; Westerterp-Plantenga, M S; Saris, W H; Goossens, I; Geurten, P; Brouns, F

    2001-03-01

    To investigate the effect of addition of modified guar gum (GG) to a low-energy semisolid meal on appetite and body weight (BW) loss. Twenty eight mainly overweight male volunteers (age, 19-56 y; body mass index, 29+/-2 kg x m(-2); BW, 89.4+/-9.2 kg). Baseline of one week with self-selected diet. Three treatments of 2 weeks with a low-energy diet divided over three times a day, consisting of a semisolid meal with (SSM+) or without GG (SSM) or a solid meal (SM) with the same energy content (947 kJ) and macronutrient composition, and a dinner of the subject's own choice. Washout periods lasted 4 weeks. Compared to baseline values, reduction in energy intake and BW loss were similar for SSM+, SSM and SM. Appetite (hunger, desire to eat or estimation of how much one could eat) was increased in SSM and in SM compared to baseline, but not in SSM+. Satiety and fullness in SSM+, SSM and SM were similar to baseline. Any intervention was more effective on BW loss when it took place the first time compared to the second and third times (2.6+/-0.2 kg, 1.7+/-0.2 kg and 1.1+/-0.2 kg, respectively; P<0.001). The SM-SSM+-SSM sequence was more effective on BW loss compared to the SSM+-SSM-SM sequence (5.6+/-1.0 and 2.5+/-0.6 kg, respectively; P<0.05). All the three treatments were equally effective with respect to BW loss. GG addition to a semisolid meal prevented an increase in appetite, hunger and desire to eat, which increase was present in the other treatments. However, differences between treatments were not statistically significant. The order effect shows that repeated 2-week bouts of dieting become increasingly ineffective. The sequence SM-SSM+-SSM was more effective than the sequence SSM+-SSM-SM, probably because compliance was relatively higher with the SSM+ or SSM diet, and compliance decreased towards the end of the complete experiment.

  2. Guar meal ameliorates Eimeria tenella infection in broiler chicks.

    PubMed

    Hassan, Sherif M; El-Gayar, Amal K; Cadwell, David J; Bailey, Christopher A; Cartwright, Aubrey L

    2008-10-20

    Guar meal contains relatively high levels of saponins, which are known to have antiprotozoal activity and may be effective against coccidiosis. A 2x2 factorial experiment investigated the impact of guar meal (0 or 5%) corn-soy-based starter broiler diets on chicks unchallenged or challenged with Eimeria tenella. At 1 day of age, 120 unsexed RossxRoss broiler chicks were randomly distributed among four treatment groups. Chicks were challenged with 5x10(3) sporulated oocysts of E. tenella in 0.5 ml at 10 days of age by oral gavage. Weekly body weight, body weight gains, feed conversion ratio and mortality rate were recorded for chicks fed from 0 to 21 days of age. Oocysts shed per gram feces were recorded from 6 to 10 days post-challenge. Results showed that challenged chicks fed 0% guar meal had significantly higher oocysts per gram shed in feces than the other groups. No significant differences among treatment groups in mortality rate were observed. Body weights of unchallenged and challenged chicks fed 0% guar meal were significantly higher than those fed 5% guar meal at 2 weeks of age. Results indicated that including 5% guar meal in the diet of chicks challenged with E. tenella decreased oocysts shed per gram feces and prevented bloody diarrhea, but without affects on body weight and feed conversion ratio at 11 days post-challenge.

  3. 78 FR 74216 - Guar Global Ltd.; Order of Suspension of Trading

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-10

    ... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Guar Global Ltd.; Order of Suspension of... and the protection of investors require a suspension of trading in the securities of Guar Global Ltd. (``Guar Global'') because of concerns regarding the accuracy and adequacy of information in the...

  4. A Randomized Controlled Comparison of Esophageal Clearance Times of Oral Budesonide Preparations.

    PubMed

    Hefner, Jody N; Howard, Robin S; Massey, Robert; Valencia, Miland; Stocker, Derek J; Philla, Katherine Q; Goldman, Matthew D; Nylund, Cade M; Min, Steve B

    2016-06-01

    Topical steroids prepared as oral viscous slurries have become common in the treatment of eosinophilic esophagitis. Esophageal mucosal contact time correlates with clinical and histologic improvement. To compare the mucosal contact time of alternative oral viscous budesonide (OVB) slurries with the conventional sucralose OVB. A blinded randomized crossover trial investigating esophageal clearance of three OVB slurry preparations was done on healthy adults. Honey and xanthan gum OVB slurries were compared with standard sucralose OVB in 24 randomly assigned subjects. Each subject ingested the sucralose OVB and either the honey or xanthan gum OVB slurries. The esophageal clearance of each slurry was evaluated as an area under the curve (AUC) using 1 millicurie of technetium-99m-sulfur colloid (Tc99) co-administered in each OVB preparation using nuclear scintigraphy. A standardized taste survey was also administered. Xanthan gum had greater mucosal contact time compared to sucralose as measured by a higher AUC at 3 min (P = 0.002), while honey showed no significant difference in esophageal clearance relative to sucralose. Taste scores were significantly higher in the honey group, while scores for xanthan gum were no different from standard sucralose. OVB slurries utilizing xanthan gum may be a superior alternative to a sucralose-based slurry due to its increased mucosal contact time and similar taste tolerance. Honey may be a suitable alternative as well, due to its similar contact time and favorable taste.

  5. Improved glucose tolerance four hours after taking guar with glucose.

    PubMed

    Jenkins, D J; Wolever, T M; Nineham, R; Sarson, D L; Bloom, S R; Ahern, J; Alberti, K G; Hockaday, T D

    1980-07-01

    To gain some insights about the possible cumulative metabolic effect after a high-fibre meal, 6 subjects took two 80 g oral glucose loads, 4 h apart. Addition of 22.3 g guar to the first load decreased the rise in blood glucose and insulin after the second (guar-free) load by 50% (p less than 0.002) and 31% (p less than 0.02) respectively. This corresponded with decreased 3-hydroxybutyrate levels at the start of the glucose tolerance test after guar (by 20%, p less than 0.02). When no guar was added to the first glucose load, both 3-hydroxybutyrate and non-esterified fatty acids tended to rise before the second test. No significant effect was seen in the responses of the gut hormones, gastric inhibitory peptide and enteroglucagon. Spreading the intake of the first 80 g of glucose over the initial 4 h (2 subjects) similarly flattened the glycaemic but increased the insulin response. The effect of guar on carbohydrate and fat metabolism, therefore, lasts at least 4 h and may result in improved carbohydrate tolerance to subsequent guar-free meals.

  6. Design Guidance for Application of Permeable Barriers to Remediate Dissolved Chlorinated Solvents,

    DTIC Science & Technology

    1997-02-01

    fill slurry composed of a reactive medium, such as iron powder and guar gum , can then be injected into the fracture to form a reactive treatment zone...slurry (Owaidat, 1996). The slurry, which is composed of powdered guar bean, acts to maintain the integrity of the trench walls during installation of...the cell. The guar gum will later biodegrade to mostly water after wall completion, and will have minimal effect on the permeability of the trench

  7. Isolation and characterization of xanthan-degrading Enterobacter sp. nov. LB37 for reducing the viscosity of xanthan in petroleum industry.

    PubMed

    Chen, Xiaoyi; Wang, Mi; Yang, Fan; Tang, Wenzhu; Li, Xianzhen

    2014-05-01

    A Gram-negative, straight rod and facultative anaerobic bacterium was isolated from soil sample. It exhibits the phenotypic characteristics consistent with its classification in the genus Enterobacter. The isolate ferment glucose to acid and gas. Arginine dihydrolase, ornithin decarboxylase and gelatinase but not deoxyribonuclease was produced by this isolate. There was no hydrogen sulfide production. On the basis of the phenotypic data, together with phylogenetic analysis based on 16S rDNA gene sequences, this strain should represent a novel species of the genus Enterobacter and was designated as LB37. The strain LB37 could degrade xanthan molecules resulting in the rapid decrease of the viscosity of xanthan solution used in oil drilling process. Endoxanthanase activity was also detected in the culture supernatant. To our knowledge, it is the first report on the microbes being involved in the xanthan degradation for oil industry. The isolate LB37 would be useful for potential application in enhanced oil recovery and oil drilling field.

  8. Comparative proteomic analysis reveals that T3SS, Tfp, and xanthan gum are key factors in initial stages of Citrus sinensis infection by Xanthomonas citri subsp. citri.

    PubMed

    Facincani, Agda P; Moreira, Leandro M; Soares, Márcia R; Ferreira, Cristiano B; Ferreira, Rafael M; Ferro, Maria I T; Ferro, Jesus A; Gozzo, Fabio C; de Oliveira, Julio C F

    2014-03-01

    The bacteria Xanthomonas citri subsp. citri (Xac) is the causal agent of citrus canker. The disease symptoms are characterized by localized host cell hyperplasia followed by tissue necrosis at the infected area. An arsenal of bacterial pathogenicity- and virulence-related proteins is expressed to ensure a successful infection process. At the post-genomic stage of Xac, we used a proteomic approach to analyze the proteins that are displayed differentially over time when the pathogen attacks the host plant. Protein extracts were prepared from infectious Xac grown in inducing medium (XAM1) for 24 h or from host citrus plants for 3 or 5 days after infection, detached times to evaluate the adaptation and virulence of the pathogen. The protein extracts were proteolyzed, and the peptides derived from tryptic digestion were investigated using liquid chromatography and tandem mass spectrometry. Changes in the protein expression profile were compared with the Xac genome and the proteome recently described under non-infectious conditions. An analysis of the proteome of Xac under infectious conditions revealed proteins directly involved in virulence such as the type III secretion system (T3SS) and effector proteins (T3SS-e), the type IV pilus (Tfp), and xanthan gum biosynthesis. Moreover, four new mutants related to proteins detected in the proteome and with different functions exhibited reduced virulence relative to the wild-type proteins. The results of the proteome analysis of infectious Xac define the processes of adaptation to the host and demonstrate the induction of the virulence factors of Xac involved in plant-pathogen interactions.

  9. Guar Near and Far: How One Crop Could Profit Lakota Country

    ERIC Educational Resources Information Center

    Singh, Subodh K.

    2014-01-01

    A Sinte Gleska University professor is exploring the feasibility of cultivating guar, one of the most expensive crops in the world, as a means to bring economic development to the Rosebud reservation and beyond. Guar is a drought-resistant industrial crop mainly grown in the Thar Desert of India and Pakistan. Since guar belongs to the legume…

  10. Partially hydrolyzed guar gum supplement reduces high-fat diet increased blood lipids and oxidative stress and ameliorates FeCl3-induced acute arterial injury in hamsters

    PubMed Central

    Kuo, Dar-Chih; Hsu, Shih-Ping; Chien, Chiang-Ting

    2009-01-01

    Increased reactive oxygen species (ROS) and hyperlipidemia can promote arterial thrombus. We evaluated the potential of a partially hydrolyzed guar gum (PHGG) as dietary fiber on lipid profiles and FeCl3-induced arterial thrombosis in the high fat-diet fed hamsters. Our in vitro results found that PHGG is efficient to scavenge O2-•, H2O2, and HOCl. High fat-diet increased plasma triglyceride, total cholesterol, LDL, VLDL, methylguanidine and dityrosine level and accelerated FeCl3-induced arterial thrombosis formation (from 463 ± 51 to 303 ± 45 sec). Low dose PHGG supplement significantly decreased the total cholesterol, LDL, methylguanidine and dityrosine level and delayed the time for arterial thrombosis formation (528 ± 75 sec). High dose PHGG supplement decreased the level in triglyceride, total cholesterol, LDL and VLDL and further delayed the time for arterial thrombus (671 ± 36 sec). The increased Bax protein and decreased Bcl-2 and HSP-70 protein expression was found in the carotid and femoral arteries of high fat-diet hamsters. Low and high dose of PHGG supplement decreased Bax expression and increased Bcl-2 and HSP-70 protein expression. We found that FeCl3 significantly enhanced intercellular adhesion molecule-1 and 4-hydroxynonenal expression in the endothelial site of damaged artery after 150-sec FeCl3 stimulation. PHGG supplement decreased the endothelial ICAM-1 and 4-hydroxynonenal expression after 150-sec FeCl3 stimulation. Based on these results, we conclude that PHGG supplement can increase antioxidant protein expression and thus decrease oxidative stress induced arterial injury. PMID:19272178

  11. Laboratory study of polymer solutions used for mobility control during in situ NAPL recovery

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Martel, K.E.; Martel, R.; Lefebvre, R.

    1998-12-31

    The use of surfactant solutions for the in situ recovery of residual NAPL in aquifers is increasingly considered as a viable remediation technique. The injection of a few pore volumes of high-concentration surfactant solutions can mobilize or solubilize most of the residual NAPL contacted by the solutions. However, the washing solutions` physico-chemical properties (low density and high viscosity), combined with the natural porous media heterogeneity, can prevent a good sweep of the entire contaminated volume. The objective of this laboratory study is first to select and characterize polymers that would be suitable for aquifer restoration. Their experiments showed that amongmore » several polymers, xanthan gum is the most suitable for aquifer remediation. An evaluation of xanthan gum solution rheology was made in order to predict shear rates, xanthan gum concentrations, salinity, and temperature effects on solution viscosity. The second set of experiments were made with a sand box which was designed to reproduce a simple heterogeneous media consisting of layers of sand with different permeability. These tests illustrate the xanthan gum solution`s ability to increase surfactant solution`s sweep efficiency and limit viscous fingering.« less

  12. Enhanced oral bioavailability and controlled release of dutasteride by a novel dry elixir.

    PubMed

    Jang, Dong-Jin; Kim, Sung Tae; Oh, Euichaul; Ban, Eunmi

    2014-01-01

    To develop a solid dosage form of dutasteride for improving its oral bioavailability, a novel dry elixir (DE) system was fabricated. DEs incorporating dextrin and/or xanthan gum were prepared using spray-drying and evaluated by morphology, ethanol content, crystallinity, dissolution and oral bioavailability. DEs were spherical with a smooth surface and had an average particle size of 20-25 μm. The ethanol content could be easily varied by controlling the spray-drying temperature. The dissolution profiles of dutasteride from each DE proved to be much faster than that of dutasteride powder due to the amorphous state and a high amount of incorporated ethanol. In particular, the pharmacokinetic profiles of dutasteride were significantly altered depending on the proportions of dextrin and xanthan gum. Blood concentrations of dutasteride from DE formulations were similar to those of market products and much greater than those of native dutasteride. Interestingly, the dissolution and pharmacokinetic profiles were easily controlled by changing the ratio of dextrin to xanthan gum. The data suggests that a DE using dextrin and/or xanthan gum could provide an applicable solid dosage form to improve the dissolution and bio-availability of dutasteride as well as to modulate its pharmacokinetics.

  13. Physicochemical, total phenols and pectin methylesterase changes on quality maintenance on guava fruit (Psidium guajava L.) coated with candeuba wax solid lipid nanoparticles-xanthan gum.

    PubMed

    García-Betanzos, Claudia Idalid; Hernández-Sánchez, Humberto; Bernal-Couoh, Tanía Florencia; Quintanar-Guerrero, David; Zambrano-Zaragoza, María de la Luz

    2017-11-01

    The objective of this work was to evaluate the application of candeuba wax solid lipid nanoparticles (SLN) and xanthan gum (XG) as coatings on guava, and their effect on the fruit's physicochemical and nutritional parameters, complementing a previous publication carried out by Zambrano-Zaragoza et al. (2013). The concentrations of SLN were selected according to those reported as the most (65g/L) and least (75g/L) efficient in post-harvest life preservation, and were compared to a coating of XG and untreated control samples. According to results, the submicron-sized systems used in the coatings with a particle size range of 267-344nm, a polydispersity index <0.2, and zeta potential of -22.8 to -30mV remained stable during 8weeks of storage. The best results were from the fruits coated with 65g/L of SLN and stored at 10°C, as they showed the lowest O 2 and CO 2 respiration rates and, consequently, less weight loss. They also had the best retention of ascorbic acid and total phenol content, with less change in fruit color compared to the control guava and those coated only with XG. These findings indicate that this batch continued their natural maturation process, but at a slower rate than the other samples. The firmness was affected by the activity of the enzyme pectin methylesterase, but results show that the 65g/L coating was efficient in maintaining fruit texture. In contrast, the 75g/L coating produced epoxy in the fruit, causing physiological damage. Finally, the guava coated with XG only had a maturation rate similar to that of the control fruit. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. 21 CFR 184.1349 - Karaya gum (sterculia gum).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Karaya gum (sterculia gum). 184.1349 Section 184.1349 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... as GRAS § 184.1349 Karaya gum (sterculia gum). (a) Karaya gum (sterculia gum) is the dried gummy...

  15. 21 CFR 184.1349 - Karaya gum (sterculia gum).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Karaya gum (sterculia gum). 184.1349 Section 184... Listing of Specific Substances Affirmed as GRAS § 184.1349 Karaya gum (sterculia gum). (a) Karaya gum (sterculia gum) is the dried gummy exudate from the trunk of trees of various species of the genus Sterculia...

  16. 21 CFR 184.1349 - Karaya gum (sterculia gum).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Karaya gum (sterculia gum). 184.1349 Section 184... Listing of Specific Substances Affirmed as GRAS § 184.1349 Karaya gum (sterculia gum). (a) Karaya gum (sterculia gum) is the dried gummy exudate from the trunk of trees of various species of the genus Sterculia...

  17. Salt type and concentration affect the viscoelasticity of polyelectrolyte solutions

    NASA Astrophysics Data System (ADS)

    Turkoz, Emre; Perazzo, Antonio; Arnold, Craig B.; Stone, Howard A.

    2018-05-01

    The addition of small amounts of xanthan gum to water yields viscoelastic solutions. In this letter, we show that the viscoelasticity of aqueous xanthan gum solutions can be tuned by different types of salts. In particular, we find that the decrease in viscoelasticity not only depends, as is known, on the salt concentration, but also is affected by the counterion ionic radius and the valence of the salt.

  18. Effect of pretreatment on the enzymatic hydrolysis of kitchen waste for xanthan production.

    PubMed

    Li, Panyu; Zeng, Yu; Xie, Yi; Li, Xiang; Kang, Yan; Wang, Yabo; Xie, Tonghui; Zhang, Yongkui

    2017-01-01

    The study was carried out to gain insight into the effect of pretreatment on enzymatic hydrolysis of kitchen waste (KW) for xanthan fermentation. Herein, various pretreatments were applied and it was found that chemical pretreatment had positive effect on the following enzymatic or overall hydrolysis process. The highest reducing sugar concentration was obtained as 51.87g/L from 2% HCl (90°C) pretreated sample, while the Kjeldahl nitrogen (KDN) concentration was 7.79g/L. Kinetic study showed that first order kinetic model was suitable to describe the enzymatic hydrolysis process. The obtained kitchen waste hydrolysate (KWH) was successfully applied for xanthan fermentation. Xanthan concentration reached 4.09-6.46g/L when KWH with 2% HCl (90°C) pretreatment was applied as medium. In comparison, a xanthan concentration of 3.25-5.57g/L was obtained from KWH without pretreatment. Therefore, pretreatment of KW using diluted acid is favorable for the overall hydrolysis process and effective for xanthan fermentation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Experiences with three different fiber supplements in weight reduction.

    PubMed

    Birketvedt, Grethe Støa; Shimshi, Mona; Erling, Thom; Florholmen, Jon

    2005-01-01

    Fiber supplements added to a caloric diet have additional effects on weight reduction in overweight subjects. The aim of this study was to compare the effect of various commercial fiber supplements (glucomannan, guar gum and alginate) on weight reduction in healthy overweight subjects. One hundred and seventy six men and women were included to receive either active fiber substance or placebo in randomized placebo-controlled studies. The fiber supplements consisted of the viscous fibers glucomannan (Chrombalance), glucomannan and guar gum (Appe-Trim) and glucomannan, guar gum and alginat (Glucosahl). All fiber supplements plus a balanced 1200 kcal diet induced significantly weight reduction more than placebo and diet alone, during a five week observation period. However, there were no significant differences between the different fibers in their ability to induce weight reduction, which was approximately 0.8 kg/week (3.8 +/- 0.9, 4.4 +/- 2.0, 4.1 +/- 0.6 in the Chrombalance, Appe-Trim and Glucosahl group, respectively). Glucomannan induced body weight reduction in healthy overweight subjects, whereas the addition of guar gum and alginate did not seem to cause additional loss of weight.

  20. Microencapsulation of β-Carotene Based on Casein/Guar Gum Blend Using Zeta Potential-Yield Stress Phenomenon: an Approach to Enhance Photo-stability and Retention of Functionality.

    PubMed

    Thakur, Deepika; Jain, Ashay; Ghoshal, Gargi; Shivhare, U S; Katare, O P

    2017-07-01

    β-Carotene, abundant majorly in carrot, pink guava yams, spinach, kale, sweet potato, and palm oil, is an important nutrient for human health due to its scavenging action upon reactive free radicals wherever produced in the body. Inclusion of liposoluble β-carotene in foods and food ingredients is a challenging aspect due to its labile nature and low absorption from natural sources. This fact has led to the application of encapsulation of β-carotene to improve stability and bioavailability. The present work was aimed to fabricate microcapsules (MCs) of β-carotene oily dispersion using the complex coacervation technique with casein (CA) and guar gum (GG) blend. The ratio of CA:GG was found to be 1:0.5 (w/v) when optimized on the basis of zeta potential-yield stress phenomenon. These possessed a higher percentage yield (71.34 ± 0.55%), lower particle size (176.47 ± 4.65 μm), higher encapsulation efficiency (65.95 ± 5.33%), and in general, a uniform surface morphology was observed with particles showing optimized release behavior. Prepared MCs manifested effective and controlled release (up to 98%) following zero-order kinetics which was adequately explained by the Korseymer-Peppas model. The stability of the freeze-dried MCs was established in simulated gastrointestinal fluids (SGF, SIF) for 8 h. Antioxidant activity of the MCs was studied and revealed the retention of the functional architecture of β-carotene in freeze-dried MCs. Minimal photolytic degradation upon encapsulation of β-carotene addressed the challenge regarding photo-stability of β-carotene as confirmed via mass spectroscopy.

  1. Responses of dietary ileal amino acid digestibility to consumption of different cultivars of potatoes and conventional fibers in grower pigs fed a high-fat basal diet.

    PubMed

    Wang, Q; Yang, X; Leonard, S; Archbold, T; Sullivan, J A; Duncan, A M; Ma, W D L; Bizimungu, B; Murphy, A; Htoo, J K; Fan, M Z

    2012-12-01

    Whereas dietary fibers are well recognized for nutritional management of human health issues, fiber is also known to be one of the dietary factors potentially affecting digestive use of dietary proteins. As a staple food, potato (Solanum tuberosum) may be a significant dietary fiber source. The objective of this study was to examine effects of dietary supplementation of six potato cultivar-genotype samples that differ in soluble fiber content and two conventional fiber components (i.e., cellulose and guar gum) on the apparent ileal AA digestibility in pigs fed a high-fat basal diet. The basal diet was formulated as a zero-fiber negative control (NC) to contain 41.5% poultry meal, 4% casein, 15% animal fat-oil blend, 2.8% sucrose, 31% corn (Zea mays) starch, 0.50% salt, and 0.40% trace mineral-vitamin supplement with fat contributing to 47% of the dietary GE. The two fiber diets were formulated by respectively diluting the basal diet with 10% guar gum and 10% cellulose at the expense of corn starch. Six other test diets were formulated by including 8.5% guar gum and further diluting the basal diet with 25.1% one of the six cultivar-genotype samples of dehydrated potato tuber powder to contain about 10% total dietary fiber at the expense of corn starch. Eighty-one 25-kg barrows were fitted with a simple T-cannula at the distal ileum and fed the diets according to a completely randomized block design with each block lasting 28 d. Compared with the NC, the ileal digestibility of Ala, Gly, and Pro were decreased (P < 0.05) by 10% guar gum whereas the digestibility of Gly was reduced (P < 0.05) by 10% cellulose. The ileal digestibility of several AA was decreased (P < 0.05) by the test potatoes plus 8.5% guar gum compared with the NC. Our results suggest that dietary inclusion of fiber at 10% from guar gum and cellulose and contributed by potatoes may adversely affect digestive use of dietary protein.

  2. Xanthan and κ-carrageenan based alkaline hydrogels as electrolytes for Al/air batteries.

    PubMed

    Di Palma, T M; Migliardini, F; Caputo, D; Corbo, P

    2017-02-10

    Xanthan and κ-carrageenan were used to prepare alkaline hydrogels to be used as electrolytes in aluminium air primary batteries. Two pasty gels were obtained starting from xanthan and KOH solutions (1M and 8M), while only the 8M KOH solution permitted the formation of a stable, elastic and gumminess hydrogel with κ-carrageenan. Discharge tests, performed on three Al/air cells assembled with Al anodes, electrolyte gels and Pt based cathodes, evidenced that all hydrogels exhibited appreciable properties of Al ion conductivities, according to the following performance order: xanthan with KOH 1M<xanthan with KOH 8M<κ-carrageenan KOH 8M. Characterization measurements (XRD, Ionic conductivity by EIS, SEM-EDS) were effected on hydrogels and galvanic cells to explain the behaviour differences detected between the hydrogels. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. The effect of β-mannanase on nutrient utilization and blood parameters in chicks fed diets containing soybean meal and guar gum.

    PubMed

    Caldas, Justina V; Vignale, Karen; Boonsinchai, Nirun; Wang, Jinrong; Putsakum, Monticha; England, Judith A; Coon, Craig N

    2018-05-11

    The present study was conducted to determine whether the addition of β-mannanase in broiler feed changes hormonal profiles in the blood and broiler performance and nutrient availability. Five hundred and four Cobb male chickens were studied during d 7 to 21. Three corn-soybean meal (SBM) based diets 1) Low SBM (18% SBM); 2) High SBM (31% SBM); and 3) High SBM+GG (31% SBM + Guar Gum (GG) 0.5%) with 3 levels of β-mannanase (0, 200, and 400 ppm) were mixed to produce 9 diets. A factorial design 3 × 3 was performed with JMP pro 13 (SAS, 2017). Analysis of variance and contrast analysis were used to test significance level at P < 0.05. Glucose (190 and 188 mg/dL) was increased with 200 and 400 ppm of β-mannanase, respectively, compared to control (182 mg/dL) in the fasted state (P < 0.037). Glucose was higher in chicks fed with the High SBM and High SBM + GG diets but lower in the fasted re-fed state (P < 0.01). Insulin was higher with 200 and 400 ppm added β-mannanase in the fed state (P < 0.021). Insulin-like growth factor-1 was higher with 400 ppm added to High SBM+GG. β-mannanase improved feed conversion ratio (FCR) 9 points with 400 ppm in High SBM diet (P < 0.01) and 16 and 18 points with 200 and 400 ppm, respectively, added to the High SBM+GG diet (P < 0.01). Viscosity decreased from 19.2 to 7 cps with both enzyme doses in the High SBM + GG diet (P < 0.01). Digestible energy was +152 kcal/kg with 400 ppm β-mannanase in the High SBM diet and +200 kcal/kg with both levels of enzyme in High SBM+GG diet. Digestibility of amino acids was improved from 0.8 to 3.6% with β-mannanase in High SBM+GG diet (P < 0.05). In conclusion, chicks fed with High SBM and High SBM+GG diets with added β-mannanase significantly improved blood glucose and anabolic hormone homeostasis, FCR, digestible energy, and digestible amino acids compared to chicks fed with same diets without β-mannanase.

  4. Designing a Clean Label Sponge Cake with Reduced Fat Content.

    PubMed

    Eslava-Zomeño, Cristina; Quiles, Amparo; Hernando, Isabel

    2016-10-01

    The fat in a sponge cake formulation was partially replaced (0%, 30%, 50%, and 70%) with OptiSol™5300.This natural functional ingredient derived from flax seeds, rich in fiber and alpha-linoleic acid, provides a natural substitute for guar and xanthan gums, avoiding E-numbers on labels. The structure and some physicochemical properties of the formulations were examined, sensory analysis was conducted and changes in starch digestibility due to adding this ingredient were determined. Increasing quantities of OptiSol™5300 gave harder cakes, with less weight loss during baking, without affecting the final cake height. There were no significant differences (P > 0.05) in texture, flavor and overall acceptance between the control and the 30% substitution cake, nor in the rapidly digestible starch values. Consequently, replacing up to 30% of the fat with OptiSol™5300 gives a new product with health benefits and a clean label that resembles the full-fat sponge cake. © 2016 Institute of Food Technologists®.

  5. Effects of dietary fibers with high water-binding capacity and swelling capacity on gastrointestinal functions, food intake and body weight in male rats.

    PubMed

    Tan, Chengquan; Wei, Hongkui; Zhao, Xichen; Xu, Chuanhui; Peng, Jian

    2017-01-01

    Objective : The aim of this study was to investigate the effects of supplementation of dietary soluble fibers with high water-binding capacity (WBC) and swelling capacity (SC) on gastrointestinal tract mass, physicochemical properties of digesta, gastrointestinal mean retention time (MRT), body weight, and food intake in male rats. Methods : Thirty-two male Sprague-Dawley rats were randomized to four equal groups and fed the control diet or diet containing 2% konjac flour (KF), pregelatinized waxy maize starch plus guar gum (PWMS+GG), andPWMS plus xanthan gum (PWMS+XG) for three weeks. Results : WBC and SC of diets followed the order of PWMS+GG > KF > PWMS + XG > control. PWMS+GG and KF groups had a lower average daily food intake than the control group, but all the groups showed no difference in final body weightand the weight gain rate. The high WBC and SC of the PWMS+GG and KF groupsled to an increase of WBC and SC in the stomach digesta, and a gain of the cecal digesta weight, due to increased cecal moisture content. Conclusion : The inclusion of the novel fiber, PWMS+GG, in the diet of male rats appears to facilitate the modulation of WBC and SC of stomach digesta and the reduction of food intake.

  6. Biopolymers to improve physical properties and leaching characteristics of mortar and concrete: A review

    NASA Astrophysics Data System (ADS)

    Olivia, M.; Jingga, H.; Toni, N.; Wibisono, G.

    2018-04-01

    The invention of environmentally friendly, high performance, and green material such as biopolymers marked an emerging trend for sustainable construction over the past decades. Biopolymer comprises of natural monomers and synthesized by plants or other organisms. The sustainable, biodegradable, and renewable biopolymers were used in concrete mixes to improve their physical and mechanical properties and durability. The aim of this paper is to provide a brief an overview of the impact of biopolymer addition into concrete and mortar mixes. Many studies on the influence of biopolymer on the properties of concrete and mortar by adding biopolymers at a certain proportion (usually less than one wt.%) to the concrete or mortar mixes, and the heavy metal leaching, rheological, and mechanical properties of the mixes were conducted. Biopolymers included in this review are chitosan (CH), xanthan gum (XG), guar gum (GG), lignosulphonate (LS), and cellulose ethers (CE). Data from previous studies showed that the addition of certain types of biopolymer into concrete and mortar mixes improve workability, water retention, and compressive strength by up to 30 percent. Chitosan strengthens heavy metal encapsulation in the mortar and neutralizes the negative impact of heavy metal on the mortar properties and environment. To sum up, the use of biopolymers improve physical properties and leaching characteristics of mortar and concrete.

  7. Soluble Fiber with High Water-Binding Capacity, Swelling Capacity, and Fermentability Reduces Food Intake by Promoting Satiety Rather Than Satiation in Rats.

    PubMed

    Tan, Chengquan; Wei, Hongkui; Zhao, Xichen; Xu, Chuanhui; Zhou, Yuanfei; Peng, Jian

    2016-10-02

    To understand whether soluble fiber (SF) with high water-binding capacity (WBC), swelling capacity (SC) and fermentability reduces food intake and whether it does so by promoting satiety or satiation or both, we investigated the effects of different SFs with these properties on the food intake in rats. Thirty-two male Sprague-Dawley rats were randomized to four equal groups and fed the control diet or diet containing 2% konjac flour (KF), pregelatinized waxy maize starch (PWMS) plus guar gum (PG), and PWMS starch plus xanthan gum (PX) for three weeks, with the measured values of SF, WBC, and SC in the four diets following the order of PG > KF > PX > control. Food intake, body weight, meal pattern, behavioral satiety sequence, and short-chain fatty acids (SCFAs) in cecal content were evaluated. KF and PG groups reduced the food intake, mainly due to the decreased feeding behavior and increased satiety, as indicated by decreased meal numbers and increased inter-meal intervals. Additionally, KF and PG groups increased concentrations of acetate acid, propionate acid, and SCFAs in the cecal contents. Our results indicate that SF with high WBC, SC, and fermentability reduces food intake-probably by promoting a feeling of satiety in rats to decrease their feeding behavior.

  8. Soluble Fiber with High Water-Binding Capacity, Swelling Capacity, and Fermentability Reduces Food Intake by Promoting Satiety Rather Than Satiation in Rats

    PubMed Central

    Tan, Chengquan; Wei, Hongkui; Zhao, Xichen; Xu, Chuanhui; Zhou, Yuanfei; Peng, Jian

    2016-01-01

    To understand whether soluble fiber (SF) with high water-binding capacity (WBC), swelling capacity (SC) and fermentability reduces food intake and whether it does so by promoting satiety or satiation or both, we investigated the effects of different SFs with these properties on the food intake in rats. Thirty-two male Sprague-Dawley rats were randomized to four equal groups and fed the control diet or diet containing 2% konjac flour (KF), pregelatinized waxy maize starch (PWMS) plus guar gum (PG), and PWMS starch plus xanthan gum (PX) for three weeks, with the measured values of SF, WBC, and SC in the four diets following the order of PG > KF > PX > control. Food intake, body weight, meal pattern, behavioral satiety sequence, and short-chain fatty acids (SCFAs) in cecal content were evaluated. KF and PG groups reduced the food intake, mainly due to the decreased feeding behavior and increased satiety, as indicated by decreased meal numbers and increased inter-meal intervals. Additionally, KF and PG groups increased concentrations of acetate acid, propionate acid, and SCFAs in the cecal contents. Our results indicate that SF with high WBC, SC, and fermentability reduces food intake—probably by promoting a feeling of satiety in rats to decrease their feeding behavior. PMID:27706095

  9. Obtention and characterization of dried gels prepared with whey proteins, honey and hydrocolloids mixture.

    PubMed

    Rodriguez, Ana C; Torrez Irigoyen, Martín R; Navarro, Alba S; Yamul, Diego K

    2017-11-01

    Large amounts of honey and liquid whey derived from the dairy industry are produced in Argentina. Honey is exported in bulk and whey is transformed into whey protein concentrates and isolates. The objective of this work was to investigate the effect of pH, composition and storage time on the properties of dried gels with honey, whey proteins and hydrocolloids. Color properties varied according to pH and composition. The fracture stress of dried gels prepared with corn starch was higher than that of gels prepared with guar gum in all conditions assayed. Young's modulus was higher at pH 7 for both compositions and increased with storage time. Rubbery characteristics were found in dried gels with guar gum, while both corn starch and guar gum made the microstructure rougher. Multivariate analysis showed that samples could be grouped by pH. Panelists preferred pH 7 products over acidic ones, and no significant differences in sensory properties were found using either corn starch or guar gum in the formulation. The results demonstrated that it is possible to generate a new product, which may open new applications for honey and whey in food formulations. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  10. Biomimetic hybrid porous scaffolds immobilized with platelet derived growth factor-BB promote cellularization and vascularization in tissue engineering.

    PubMed

    Murali, Ragothaman; Ponrasu, Thangavel; Cheirmadurai, Kalirajan; Thanikaivelan, Palanisamy

    2016-02-01

    Development of hybrid scaffolds with synergistic combination of growth factor is a promising approach to promote early in vivo wound repair and tissue regeneration. Here, we show the rapid wound healing in Wistar albino rats using biomimetic collagen-poly(dialdehyde) guar gum based hybrid porous scaffolds covalently immobilized with platelet derived growth factor-BB. The immobilized platelet derived growth factor in the hybrid scaffolds not only enhance the total protein, collagen, hexosamine, and uronic acid contents in the granulation tissue but also provide stronger tissues. The wound closure analysis reveal that the complete epithelialization period is 15.4 ± 0.9 days for collagen-poly(dialdehyde) guar gum-platelet derived growth factor hybrid scaffolds, whereas it is significantly higher for control, collagen, collagen- poly(dialdehyde) guar gum and povidine-iodine treated groups. Further, the histological evaluation shows that the immobilized platelet derived growth factor in the hybrid scaffolds induced a more robust cellular and vascular response in the implanted site. Hence, we demonstrate that the collagen-poly(dialdehyde) guar gum hybrid scaffolds loaded with platelet derived growth factor stimulates chemotactic effects in the implanted site to promote rapid tissue regeneration and wound repair without the assistance of antibacterial agents. © 2015 Wiley Periodicals, Inc.

  11. GI transit and absorption of solid food: multiple effects of guar.

    PubMed

    Meyer, J H; Doty, J E

    1988-08-01

    These experiments were undertaken in dogs with midintestinal fistulas to determine whether guar added to a meal of solid food would disrupt gastric sieving and give rise to maldigestion of solid food. Dogs were fed a standard meal of steak, chicken liver, bread, margarine, and water in which there was 0, 3.3, 7.5, or 15 g guar powder. The margarine or the liver contained [14C]triolein. Using an isotope ratio method, we determined how much [14C]triolein was absorbed at midintestine. We found that guar in a dose-related fashion increased the weight of chyme collected at midintestine, markedly reduced the percent of triolein absorbed by midintestine from 88 to 38%, and profoundly increased the passage to midintestine of large, poorly digestible pieces of steak and liver. The viscosity of the guar promoted the GI transit of large, poorly digestible pieces of food but also reduced absorption by other mechanisms.

  12. Can Re-Use of Demil Explosives and Propellants in Commercial Blasting Be Made Environmentally Acceptable?

    DTIC Science & Technology

    1994-08-01

    sodium nitrate dissolved in water and thickened or gel led by the addition of a gelling agent such as guar gum . Additional AN in the form of prills and...which can be pumped into the drillhole and further thickened by crosslinking of the guar gum to a rubbery consistency which has quite good water...moderate negative balances, and smokeless powders have small negative oxygen balances. When present in large pieces, these materials produce reaction

  13. The effect of unabsorbable carbohydrate on gut hormones. Modification of post-prandial GIP secretion by guar.

    PubMed

    Morgan, L M; Goulder, T J; Tsiolakis, D; Marks, V; Alberti, K G

    1979-08-01

    Five healthy volunteers and 6 diabetics were given a mixed test meal on two occasions--once with and once without 10 g guar flour. Addition of guar caused a 47% decrease in maximum post-prandial GIP levels, a 48% decrease in blood glucose and a 48% decrease in plasma insulin in normal subjects. In diabetics, addition of guar caused a 30% reduction in maximum post-prandial GIP and 58% decrease in blood glucose. Four normal and 6 diabetic subjects were given a predominantly carbohydrate meal, again with and without 10 g guar. Addition of guar caused a 78% decrease in blood glucose and a 59% decrease in plasma insulin in normal subjects. In diabetics addition of guar caused a 71% decrease in maximum post-prandial plasma GIP and a 68% decrease in blood glucose. Lowering of post-prandial blood glucose, plasma insulin and GIP levels by guar was statistically significant in every case. Addition of guar to the predominantly carbohydrate meal caused a decrease in total plasma GLI in both normal and diabetic subjects but reached statistical significance only in the normal subjects. There was a highly significant correlation (r = 0.83; p less than 0.0005) between peak post-prandial insulin levels in normal subjects and the corresponding plasma GIP concentration. The reduction of GIP or GLI secretion may, therefore, be partly responsible for the smaller rise in plasma insulin observed in normal volunteers when guar is added to meals.

  14. Comparative study of Acacia nilotica exudate gum and acacia gum.

    PubMed

    Bhushette, Pravin R; Annapure, Uday S

    2017-09-01

    Over 900 species of Acacia trees are found on earth, most of them produce gums. Acacia nilotica (Babul tree) is one of the major gum-yielding acacia species found in he Indian subcontinent. A. nilotica gum was collected from Maharashtra, India and characterised for its proximate analysis, physicochemical, functional, rheological and thermal properties. These properties further were compared with commercially available Acacia gum (AG). The sugar composition of the gums indicated the presence of arabinose, galactose, and rhamnose in ANG and AG. FTIR spectrums revealed the typical trend of polysaccharides for both the gums, however, the difference was observed in fingerprint region. The rheological outcomes were derived from flow curve measurements of gums at different concentrations and temperatures. Investigations of the flow curves of both gums revealed the diminutive difference in viscosity profile. The concentration difference in the monosaccharides of polysaccharides and proximate analysis of gums could be the responsible for the difference in rheological and thermal properties of gums. However, ANG shows good resemblance with AG and can be substituted for numerous applications in food and pharmaceutical industry. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Bleeding gums

    MedlinePlus

    ... form of gum and jawbone disease known as periodontitis . Other causes of bleeding gums include: Any bleeding ... if: The bleeding is severe or long-term (chronic) Your gums continue to bleed even after treatment ...

  16. The effect of acacia gum and a water-soluble dietary fiber mixture on blood lipids in humans.

    PubMed

    Jensen, C D; Spiller, G A; Gates, J E; Miller, A F; Whittam, J H

    1993-04-01

    Water-soluble dietary fibers (WSDF) are generally thought to lower cholesterol. This study compared the cholesterol-lowering effects of a medium viscosity WSDF mixture (psyllium, pectin, guar gum and locust bean gum) with an equal amount of WSDF from acacia gum, which has a lower viscosity. Hypercholesterolemic males (n = 13) and females (n = 16) were randomly assigned to one of two WSDF treatments provided in a low-calorie powder form for mixing into beverages (< 4 kcal/serving). Subjects were instructed to mix powders into their usual beverages and to consume them three times daily (5 g WSDF/serving) for 4 weeks while consuming their typical fat-modified diets. Exercise and body weights were also held constant. The WSDF mixture yielded a 10% decrease in plasma total cholesterol (from 251 +/- 20 to 225 +/- 19 mg/dL; p < 0.01), and a 14% reduction in low-density lipoprotein cholesterol (from 167 +/- 14 to 144 +/- 14 mg/dL; p < 0.001). No significant changes in plasma high-density lipoprotein cholesterol, very-low-density lipoprotein cholesterol or triglycerides were observed. In contrast, the acacia gum-treated group showed no change in any plasma lipid parameters. The WSDF treatments did not produce significant changes in mean dietary intakes within or between treatment groups. These data support previous findings that a diet rich in select WSDF can be a useful cholesterol-lowering adjunct to a fat-modified diet, but that caution should be exercised in ascribing cholesterol-lowering efficacy to dietary fibers based solely on their WSDF classification. Finally, WSDF viscosity is a potential cholesterol-lowering factor to be explored further.

  17. Morphological and reproductive characterization of guar genetic resources regenerated in Georgia, USA

    USDA-ARS?s Scientific Manuscript database

    Guar, Cyamopsis tetragonoloba is used worldwide in food, laxatives, paper, oil well drilling, and in the mining industry. The USDA, ARS, PGRCU conserves 1,298 accessions originating from Pakistan and India. Guar accessions were directly planted to the field in Griffin, GA between early May and the s...

  18. Electrospun Nanofibers of Guar Galactomannan for Targeted Drug Delivery

    NASA Astrophysics Data System (ADS)

    Chu, Hsiao Mei Annie

    2011-12-01

    Guar galactomannan is a biodegradable polysaccharide used widely in the food industry but also in the cosmetics, pharmaceutical, oil drilling, textile and paper industries. Guar consists of a mannose backbone and galactose side groups that are both susceptible to enzyme degradation, a unique property that can be explored for targeted drug delivery especially since those enzymes are naturally secreted by the microflora in human colon. The present study can be divided into three parts. In the first part, we discuss ways to modify guar to produce nanofibers by electrospinning, a process that involves the application of an electric field to a polymer solution or melt to facilitate production of fibers in the sub-micron range. Nanofibers are currently being explored as the next generation of drug carriers due to its many advantages, none more important than the fact that nanofibers are on a size scale that is a fraction of a hair's width and have large surface-to-volume ratio. The incorporation and controlled release of nano-sized drugs is one way in which nanofibers are being utilized in drug delivery. In the second part of the study, we explore various methods to crosslink guar nanofibers as a means to promote water-resistance in a potential drug carrier. The scope and utility of water-resistant guar nanofibers can only be fully appreciated when subsequent drug release studies are carried out. To that end, the third part of our study focuses on understanding the kinetics and diffusion mechanisms of a model drug, Rhodamine B, through moderately-swelling (crosslinked) hydrogel nanofibers in comparison to rapidly-swelling (non-crosslinked) nanofibers. Along the way, our investigations led us to a novel electrospinning set-up that has a unique collector designed to capture aligned nanofibers. These aligned nanofiber bundles can then be twisted to hold them together like yarn. From a practical standpoint, these yarns are advantageous because they come freely suspended and

  19. Gelation of soybean protein and polysaccharides delays digestion.

    PubMed

    Hu, Bing; Chen, Qing; Cai, Qimeng; Fan, Yun; Wilde, Peter J; Rong, Zhen; Zeng, Xiaoxiong

    2017-04-15

    Xanthan gum and carrageenan, representing the medium and highly negatively charged polysaccharides, were heated respectively together with soybean protein isolate (SPI) at different biopolymer ratios. Upon mixing with simulated stomach juice (SSJ), the xanthan-SPI and carrageenan-SPI at biopolymer ratios higher than 0.01 leads to self-assembled gelation immediately. Stronger gel is formed under higher biopolymer ratios. Highly negatively charged carrageenan forms a stronger gel than that composed with xanthan gum. SDS-PAGE results show the digestibility of SPI is delayed after incorporation with the polysaccharides, which is enhanced with the increase of the biopolymer mass ratios. And the polysaccharide with higher negative charge has stronger potential in delaying the digestion of SPI. Furthermore, the microstructure of the xanthan-SPI and carrageenan-SPI gel before and after simulated stomach digestion was characterized by scanning electron microscope (SEM), which also confirms that the gel delays the digestion of soybean protein. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Baclofen novel gastroretentive extended release gellan gum superporous hydrogel hybrid system: in vitro and in vivo evaluation.

    PubMed

    El-Said, Ibrahim A; Aboelwafa, Ahmed A; Khalil, Rawia M; ElGazayerly, Omaima N

    2016-01-01

    Baclofen is a centrally acting skeletal muscle relaxant with a short elimination half-life, which results in frequent daily dosing and subsequent poor patient compliance. The narrow absorption window of baclofen in the upper gastrointestinal tract limits its formulation as extended release dosage forms. In this study, baclofen extended release superporous hydrogel (SPH) systems, including conventional SPH, SPH composite and SPH hybrid (SPHH), were prepared aiming to increase the residence of baclofen at its absorption window. The applicability of different polymers, namely, gellan gum, guar gum, polyvinyl alcohol and gelatin, was investigated in preparation of SPHH systems. The prepared SPH systems were evaluated regarding weight and volume swelling ratio, porosity, mechanical properties, incorporation efficiency, degree of erosion and drug release. In vivo assessment was performed in dogs to evaluate gastric residence time by X-ray studies. In addition, the oral bioavailability of baclofen relative to commercially available Lioresal® immediate release tablets was also investigated. The novel baclofen gellan SPHH cross linked with calcium chloride was characterized by optimum mechanical properties, acceptable swelling properties as well as extended drug release. It also exhibited a prolonged plasma profile when compared to twice daily administered Lioresal®.

  1. Can Re-Use of Demil Explosives and Propellants in Commercial Blasting be Made Environmentally Acceptable

    DTIC Science & Technology

    1994-08-01

    the addition of a gelling agent such as guar gum . Additional AN in the form of prills and a sensitizer such as TNT flakes or grains is mixed into the...crosslinking of the guar gum to a rubbery consistency which has quite good water resistance although it is somewhat water soluble. The name water gel...negative oxygen balance: large negative for TNT and Comp. B, moderate for the AP/Al-based booster rocket propellants, and small for the smokeless powders

  2. The Use of D-Optimal Mixture Design in Optimizing Development of Okara Tablet Formulation as a Dietary Supplement.

    PubMed

    Zen, Nur Izzati Mohamad; Abd Gani, Siti Salwa; Shamsudin, Rosnah; Masoumi, Hamid Reza Fard

    2015-01-01

    The usage of soy is increasing year by year. It increases the problem of financial crisis due to the limited sources of soybeans. Therefore, production of oral tablets containing the nutritious leftover of soymilk production, called okara, as the main ingredient was investigated. The okara tablets were produced using the direct compression method. The percentage of okara, guar gum, microcrystalline cellulose (Avicel PH-101), and maltodextrin influenced tablets' hardness and friability which are analyzed using a D-optimal mixture design. Composition of Avicel PH-101 had positive effects for both hardness and friability tests of the tablets. Maltodextrin and okara composition had a significant positive effect on tablets' hardness, but not on percentage of friability of tablets. However, guar gum had a negative effect on both physical tests. The optimum tablet formulation was obtained: 47.0% of okara, 2.0% of guar gum, 35.0% of Avicel PH-101, and 14.0% of maltodextrin.

  3. The Use of D-Optimal Mixture Design in Optimizing Development of Okara Tablet Formulation as a Dietary Supplement

    PubMed Central

    Mohamad Zen, Nur Izzati; Shamsudin, Rosnah

    2015-01-01

    The usage of soy is increasing year by year. It increases the problem of financial crisis due to the limited sources of soybeans. Therefore, production of oral tablets containing the nutritious leftover of soymilk production, called okara, as the main ingredient was investigated. The okara tablets were produced using the direct compression method. The percentage of okara, guar gum, microcrystalline cellulose (Avicel PH-101), and maltodextrin influenced tablets' hardness and friability which are analyzed using a D-optimal mixture design. Composition of Avicel PH-101 had positive effects for both hardness and friability tests of the tablets. Maltodextrin and okara composition had a significant positive effect on tablets' hardness, but not on percentage of friability of tablets. However, guar gum had a negative effect on both physical tests. The optimum tablet formulation was obtained: 47.0% of okara, 2.0% of guar gum, 35.0% of Avicel PH-101, and 14.0% of maltodextrin. PMID:26171418

  4. Kiwifruit Non-Sugar Components Reduce Glycaemic Response to Co-Ingested Cereal in Humans.

    PubMed

    Mishra, Suman; Edwards, Haley; Hedderley, Duncan; Podd, John; Monro, John

    2017-10-30

    Kiwifruit (KF) effects on the human glycaemic response to co-ingested wheat cereal were determined. Participants (n = 20) consumed four meals in random order, all being made to 40 g of the same available carbohydrate, by adding kiwifruit sugars (KF sug; glucose, fructose, sucrose 2:2:1) to meals not containing KF. The meals were flaked wheat biscuit (WB)+KFsug, WB+KF, WB+guar gum+KFsug, WB+guar gum+KF, that was ingested after fasting overnight. Blood glucose was monitored 3 h and hunger measured at 180 min post-meal using a visual analogue scale. KF and guar reduced postprandial blood glucose response amplitude, and prevented subsequent hypoglycaemia that occurred with WB+KFsug. The area between the blood glucose response curve and baseline from 0 to 180 min was not significantly different between meals, 0-120 min areas were significantly reduced by KF and/or guar. Area from 120 to 180 min was positive for KF, guar, and KF+guar, while the area for the WB meal was negative. Hunger at 180 min was significantly reduced by KF and/or guar when compared with WB. We conclude that KF components other than available carbohydrate may improve the glycaemic response profile to co-ingested cereal food.

  5. Kiwifruit Non-Sugar Components Reduce Glycaemic Response to Co-Ingested Cereal in Humans

    PubMed Central

    Mishra, Suman; Edwards, Haley; Hedderley, Duncan; Podd, John; Monro, John

    2017-01-01

    Kiwifruit (KF) effects on the human glycaemic response to co-ingested wheat cereal were determined. Participants (n = 20) consumed four meals in random order, all being made to 40 g of the same available carbohydrate, by adding kiwifruit sugars (KF sug; glucose, fructose, sucrose 2:2:1) to meals not containing KF. The meals were flaked wheat biscuit (WB)+KFsug, WB+KF, WB+guar gum+KFsug, WB+guar gum+KF, that was ingested after fasting overnight. Blood glucose was monitored 3 h and hunger measured at 180 min post-meal using a visual analogue scale. KF and guar reduced postprandial blood glucose response amplitude, and prevented subsequent hypoglycaemia that occurred with WB+KFsug. The area between the blood glucose response curve and baseline from 0 to 180 min was not significantly different between meals, 0–120 min areas were significantly reduced by KF and/or guar. Area from 120 to 180 min was positive for KF, guar, and KF+guar, while the area for the WB meal was negative. Hunger at 180 min was significantly reduced by KF and/or guar when compared with WB. We conclude that KF components other than available carbohydrate may improve the glycaemic response profile to co-ingested cereal food. PMID:29084137

  6. Gum Disease

    MedlinePlus

    ... and gums isn't removed by good daily dental care, over time it will harden into a crust called calculus or tartar . Once tartar forms, it starts to destroy gum tissue, causing gums to bleed and pull away from the teeth. This is known as periodontitis (pronounced: pair-ee- ...

  7. Dietary fibre supplementation of a 'normal' breakfast administered to diabetics.

    PubMed

    Williams, D R; James, W P; Evans, I E

    1980-05-01

    The supplementation of a breakfast by 10 g of guar, pectin, agar or locust bean gum in powder form in 13 maturity onset, non-insulin dependent diabetics failed to decrease significantly the post-prandial rise in plasma glucose and insulin seen after a similar meal without the supplement. The values of one hour post-prandial increment in blood glucose seen with guar powder were, for control meal (mean +/- SEM) 5.8 %/- 0.4 mmol/l, for test, 5.7 +/- 0.5; with pectin powder, control 6.4 +/- 0.8 mmol/l, test 5.0 +/- 1.2 mmol/l; with agar powder, control 7.5 +/- 1.0, test 7.0 +/- 0.5; with locust bean gum powder, control 5.9 +/- 1.0, test 5.0 +/- 0.7. The equivalent values for one hour insulin (microU/ml, mean +/- SEM) were, for guar powder, 51 +/0 21 and 51 +/- 16; for pectin powder 60 +/- 24 and 63 +/- 17; for agar powder, 27 +/- 9 and 36 +/- 11 and, for locust bean gum powder 53 +/- 26 and 62 +/- 18. The guar, pectin and locust gum tended to form lumps, and all the substances tested were unpalatable in powder form producing feelings of abdominal discomfort and abnormal fullness. Administering the same quantity of guar or pectin in a well hydrated form (but not premixed with the carbohydrate portion of the food) to the same people under identical conditions did not enhance its effectiveness. Supplementing diets with any of these sources of dietary fibre in either of these forms and in these amounts is unlikely to be beneficial in the management of non-insulin dependent diabetes.

  8. PEG and Thickeners: A Critical Interaction Between Polyethylene Glycol Laxative and Starch-Based Thickeners.

    PubMed

    Carlisle, Brian J; Craft, Garrett; Harmon, Julie P; Ilkevitch, Alina; Nicoghosian, Jenik; Sheyner, Inna; Stewart, Jonathan T

    2016-09-01

    Clinicians commonly encounter dysphagia and constipation in a skilled nursing population. Increasing the viscosity of liquids, usually with a starch- or xanthan gum-based thickener, serves as a key intervention for patients with dysphagia. We report a newly identified and potentially dangerous interaction between polyethylene glycol 3350 laxative (PEG) and starch-thickened liquids. A patient requiring nectar-thickened liquids became constipated, and medical staff prescribed PEG for constipation. His nurse observed that the thickened apple juice immediately thinned to near-water consistency when PEG was added. She obtained the same results with thickened water and coffee. We quantified this phenomenon by isothermal rotational rheology. Results confirmed a precipitous loss of thickening when PEG was added to starch-based thickeners but not with xanthan gum-based thickeners. Clinicians and front-line staff should be aware of this potentially critical interaction between PEG- and starch-based thickeners. Although confirmatory studies are needed, our preliminary data suggest that PEG may be compatible with xanthan gum-- based thickeners. Copyright © 2016 AMDA – The Society for Post-Acute and Long-Term Care Medicine. All rights reserved.

  9. Applications of Natural Polymeric Materials in Solid Oral Modified-Release Dosage Forms.

    PubMed

    Li, Liang; Zhang, Xin; Gu, Xiangqin; Mao, Shirui

    2015-01-01

    Solid oral modified-release dosage forms provide numerous advantages for drug delivery compared to dosage forms where the drugs are released and absorbed rapidly following ingestion. Natural polymers are of particular interest as drug carriers due to their good safety profile, biocompatibility, biodegradability, and rich sources. This review described the current applications of important natural polymers, such as chitosan, alginate, pectin, guar gum, and xanthan gum, in solid oral modified-release dosage forms. It was shown that natural polymers have been widely used to fabricate solid oral modified-release dosage forms such as matrix tablets, pellets and beads, and especially oral drug delivery systems such as gastroretentive and colon drug delivery systems. Moreover, chemical modifications could overcome the shortcomings associated with the use of natural polymers, and the combination of two or more polymers presented further advantages compared with that of single polymer. In conclusion, natural polymers and modified natural polymers have promising applications in solid oral modified-release dosage forms. However, commercial products based on them are still limited. To accelerate the application of natural polymers in commercial products, in vivo behavior of natural polymers-based solid oral modified-release dosage forms should be deeply investigated, and meanwhile quality of the natural polymers should be controlled strictly, and the influence of formulation and process parameters need to be understood intensively.

  10. Influence of internal composition on physicochemical properties of alginate aqueous-core capsules.

    PubMed

    Ben Messaoud, Ghazi; Sánchez-González, Laura; Probst, Laurent; Desobry, Stéphane

    2016-05-01

    To enhance physicochemical properties of alginate aqueous-core capsules, conventional strategies were focused in literature on designing composite and coated capsules. In the present study, own effect of liquid-core composition on mechanical and release properties was investigated. Capsules were prepared by dripping a CaCl2 solution into an alginate gelling solution. Viscosity of CaCl2 solution was adjusted by adding cationic, anionic and non-ionic naturally derived polymers, respectively chitosan, xanthan gum and guar gum. In parallel, uniform alginate hydrogels were prepared by different methods (pouring, in situ forming and mixing). Mechanical stability of capsules and plane hydrogels were respectively evaluated by compression experiments and small amplitude oscillatory shear rheology and then correlated. Capsules permeability was evaluated by monitoring diffusion of encapsulated cochineal dye, riboflavin and BSA. The core-shell interactions were investigated by ATR-FTIR. Results showed that inner polymer had an impact on membrane stability and could act as an internal coating or provide mechanical reinforcement. Mechanical properties of alginate capsules were in a good agreement with rheological behavior of plane hydrogels. Release behavior of the entrapped molecules changed considerably. This study demonstrated the importance of aqueous-core composition, and gave new insights for possible adjusting of microcapsules physicochemical properties by modulating core-shell interactions. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. Sensory characteristics of liquids thickened with commercial thickeners to levels specified in the International Dysphagia Diet Standardization Initiative (IDDSI) framework.

    PubMed

    Ong, Jane Jun-Xin; Steele, Catriona M; Duizer, Lisa M

    2018-06-01

    Sensory characteristics are important for the acceptance of thickened liquids, but those of liquids thickened to the new standards put forth by the International Dysphagia Diet Standardization Initiative (IDDSI) are unknown. This research sought to identify and rate the perception of important sensory properties of liquids thickened to levels specified in the IDDSI framework. Samples were made with water, with and without added barium sulfate, and were thickened with a cornstarch or xanthan gum based thickener. Samples were characterized using projective mapping/ultra-flash profiling to identify important sample attributes, and then with trained descriptive analysis panels to characterize those attributes in non-barium and barium thickened liquids. Three main groups of attributes were observed. Taste and flavor attributes decreased in intensity with increasing thickener. Thickener specific attributes included graininess and chalkiness for the cornstarch thickened samples, and slipperiness for the xanthan gum samples. Within the same type of thickener, ratings of thickness-related attributes (perceived viscosity, adhesiveness, manipulation, and swallowing) at different IDDSI levels were significantly different from each other. However, in non-barium samples, cornstarch samples were perceived as thicker than xanthan gum samples even though they had similar apparent viscosities at 50 s -1 . On the other hand, the two thickeners had similar perceived thickness in the barium samples even though the apparent viscosities of cornstarch samples were higher than those of the xanthan gum samples. In conclusion, IDDSI levels can be distinguished based on sensory properties, but these properties may be affected by the type of thickener and medium being thickened.

  12. Effect of complexation conditions on microcapsulation of Lactobacillus acidophilus in xanthan-chitosan polyelectrolyte complex gels.

    PubMed

    Chen, He; Song, Yajuan; Liu, Nina; Wan, Hongchang; Shu, Guowei; Liao, Na

    2015-01-01

    Lactobacillus acidophilus has become increasingly popular because of their beneficial effects on health of their host, and are called proboscis. In order to exert beneficial effects for probiotics, they must be able to tolerate the acidic conditions of the stomach environment and the bile in the small intestine. Microencapsulated form has received reasonable attention, since it can protect probiotic organisms against an unfavourable environment, and to allow their release in a viable and metabolically active state in the intestine. The aim of this study was to investigate some factores, such as chitosan solution pH and concentration, xanthan concentration, cell suspension-xanthan ratio, mixed bacteria glue liquid-chitosan ratio, which impacted the process of microencapsulation of L. acidophilus. In this study, L. acidophilus was immobilized with xanthan⁄chitosan gel using extrusion method. The viable counts and encapsulation yield of L. acidophilus encapsulated in different chitosan solution pH (4.5, 5, 5.5 and 6), in different chitosan concentration (0.5%, 0.7%, 0.9% and 1.1%), in different xanthan concentration (0.5%, 0.7%, 0.9% and 1.1%), in different cell suspension-xanthan ratios (1:5, 1:10, 1:15 and 1:20), in different mixed bacteria glue liquid-chitosan ratios (1:3, 1:4, 1:5 and 1:6), have been investigated by single factor experiment method. The optimum conditions of microencapsulated L. acidophilus have been observed. The optimum chitosan solution pH for L. acidophilus was 5.5; the optimum chitosan concentration was 0.9%; the optimum xanthan concentration was 0.7%; the optimum cell suspension-xanthan ratio was 1:10; the optimum mixed bacteria glue liquid-chitosan ratio was 1:3. These results will be helpful to further optimize the process of L. acidophilus microencapsulation, and provide reference for obtaining higher viable counts and entrapped yield of L. acidophilus microcapsules.

  13. Reduced Solubility of Polymer-Oriented Water for Sodium Salts, Sugars, Amino Acids, and other Solutes Normally Maintained at Low Levels in Living Cells,

    DTIC Science & Technology

    1983-01-01

    following were obtained: gum arabic (64C-0252; gum ghatti (42C-2380; gum guar (32C1930); gum Karaya (103C-0720); gum locust bean (42C-2900); gum ...plotted against time of incubation. In the efflux method, usually the dry polymer powder was dissolved 22 + 35 in water containing the radioactive label...tragacanth (74C-0207); and gum xantham (888-0200); corn starch (6813-0216); potato starch (65B-2060); pectin (107B-0090); alginic acid (766-818); also

  14. An Examination of Issues Related to U.S. Lake Erie Natural Gas Development.

    DTIC Science & Technology

    1978-09-01

    37 pg/mL 27 pg/mL 27 pg/mL 27 pg/mL detergent Wac-8 Talc & guar Non-toxic to 10,000 pg/mL in 24 hours gum Wac-10 Talc, silica Non-toxic to 10,000 ug...mL in 24 hours guar gum Fr-10 High molecu- Bioassay Method not applicable lar weight synthetic Fr-19 Polymer Bioassay Method not applicable aData from...Adeorption None Activated carbon. Activated carbon Activated carbon Activated carbon Activated carbon powdered Filtration Sandb Activated carbon. Sand Sand

  15. Gum Graft Surgery

    MedlinePlus

    ... gum line and reduce sensitivity. What are the benefits of gum graft surgery? A gum graft can ... improve function or esthetics, patients often receive the benefits of both: a beautiful new smile and improved ...

  16. Thaumatin and gum arabic allergy in chewing gum factory workers.

    PubMed

    Tschannen, Mattias P; Glück, Ulrich; Bircher, Andreas J; Heijnen, Ingmar; Pletscher, Claudia

    2017-07-01

    Thaumatin is a sweetener and flavor modifier commonly used in the food industry. Likewise, gum arabic is widely used as a food stabilizer and thickening agent. We report here that a powder mixture composed of 10% thaumatin and 90% gum arabic led to allergic symptoms in the upper airways in occupationally exposed individuals: four of eight workers of a chewing gum factory exposed to this powder mixture had pronounced rhinitis. A positive skin prick test result for pure thaumatin was obtained in all four individuals with rhinitis of whom two also had a positive skin prick test result for pure gum arabic and gum arabic-specific IgE. Subsitution of a powdered thaumatin with a liquid form reduced symptoms among the rhinitic workers. Although gum arabic is a well-known potential allergen, we were unable to find prior documentation of allergic symptoms to thaumatin when it is used in the food industry. © 2017 Wiley Periodicals, Inc.

  17. Gummed-up memory: chewing gum impairs short-term recall.

    PubMed

    Kozlov, Michail D; Hughes, Robert W; Jones, Dylan M

    2012-01-01

    Several studies have suggested that short-term memory is generally improved by chewing gum. However, we report the first studies to show that chewing gum impairs short-term memory for both item order and item identity. Experiment 1 showed that chewing gum reduces serial recall of letter lists. Experiment 2 indicated that chewing does not simply disrupt vocal-articulatory planning required for order retention: Chewing equally impairs a matched task that required retention of list item identity. Experiment 3 demonstrated that manual tapping produces a similar pattern of impairment to that of chewing gum. These results clearly qualify the assertion that chewing gum improves short-term memory. They also pose a problem for short-term memory theories asserting that forgetting is based on domain-specific interference given that chewing does not interfere with verbal memory any more than tapping. It is suggested that tapping and chewing reduce the general capacity to process sequences.

  18. Effect of Food Thickener on Dissolution and Laxative Activity of Magnesium Oxide Tablets in Mice.

    PubMed

    Tomita, Takashi; Goto, Hidekazu; Yoshimura, Yuya; Kato, Kazushige; Yoshida, Tadashi; Tanaka, Katsuya; Sumiya, Kenji; Kohda, Yukinao

    2016-01-01

    The present study examined the dissolution of magnesium oxide (MgO) from MgO tablets placed in a food thickening agent (food thickener) and its effects on laxative activity. We prepared mixtures of MgO tablets suspended in an aqueous suspension and food thickeners in order to evaluate the dissolution of MgO. The results of the dissolution tests revealed that agar-based food thickeners did not affect the MgO dissolution. In contrast, some xanthan gum-based food-thickener products show dissolution rates with certain mixtures containing disintegrated MgO tablets suspended in a food thickener that decrease over time. However, other xanthan gum-based food-thickener products show dissolution rates that decrease immediately after mixing, regardless of the time they were allowed to stand. In order to investigate the laxative activity of MgO, we orally administered a mixture of MgO suspension and food thickener to mice and observed their bowel movements. The animal experiments showed that when agar-based food thickeners were used, the laxative activity of MgO was not affected, but it decreased when xanthan gum-based food thickeners were used.

  19. Environmentally Benign Aircraft Anti-icing and Deicing Fluids Based on Cost Effective, Bio-based Ingredients

    DTIC Science & Technology

    2012-09-01

    xanthan gum, welan gum, or carraggenan gum.(13) Examples of particulate thickeners include lightly cross-linked polyacrylic acid. Both types of ...based formulation.(14) The currently used Type IV AAFs are believed to primarily use polyacrylic acid (PAA) polymer, stabilized by potassium ...Prescribed by ANSI-Std Z39-18 REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information

  20. A fibre cocktail of fenugreek, guar gum and wheat bran reduces oxidative modification of LDL induced by an atherogenic diet in rats.

    PubMed

    Venkatesan, Nandini; Devaraj, S Niranjali; Devaraj, H

    2007-01-01

    LDL (low-density lipoprotein) oxidation is a key trigger factor for the development of atherosclerosis. Relatively few studies exist on the impact of dietary fibre on LDL oxidation. This study was undertaken to evaluate the influence of a novel fibre mix of fenugreek seed powder, guar gum and wheat bran (Fibernat) on LDL oxidation induced by an atherogenic diet. Male Wistar albino rats were administered one of the following diets: (1) a control diet that was fibre-free (Group I); (2) an atherogenic diet containing 1.5% cholesterol and 0.1% cholic acid (Group II) or (3) an atherogenic diet supplemented with Fibernat (Group III). Peroxidative changes in low-density lipoprotein (LDL) and the oxidative susceptibility of LDL and the LDL + VLDL (very low-density lipoprotein) fraction were determined. As a corollary to the oxidative modification theory, the titer of autoantibodies to oxidised LDL (oxLDL) was determined at various time points of the study. In addition, plasma homocysteine (tHcy) and lipoprotein (Lp (a)), apolipoprotein (apoB), cholesterol, triglyceride, phospholipid and alpha-tocopherol content of LDL were determined. A decrease in malonaldehyde (MDA) content (p<0.05) and relative electrophoretic mobility (REM) of LDL was observed in the group III rats as compared to the group II rats. An increase in lag time to oxidation (p<0.01) and decrease in maximum oxidation (p<0.01) and oxidation rate (p<0.01) were observed in the LDL + VLDL fraction of group III rats. In group II rats, formation of autoantibodies to oxLDL occurred at an earlier time point and at levels greater than in the group III rats. Fibernat, had a sparing effect on LDL alpha-tocopherol, which was about 51% higher in the group III rats than in the group II rats; apo B content of LDL was reduced by 37.6% in group III rats. LDL of group III rats displayed a decrease in free and ester cholesterol (p<0.01) as compared to that of group II. A decrease in plasma homocysteine (p<0.01) and an increase

  1. Chewing gum--facts and fiction: a review of gum-chewing and oral health.

    PubMed

    Imfeld, T

    1999-01-01

    The world market for chewing gum is estimated to be 560,000 tons per year, representing approximately US $5 billion. Some 374 billion pieces of chewing gum are sold worldwide every year, representing 187 billion hours of gum-chewing if each piece of gum is chewed for 30 minutes. Chewing gum can thus be expected to have an influence on oral health. The labeling of sugar-substituted chewing gum as "safe for teeth" or "tooth-friendly" has been proven beneficial to the informed consumer. Such claims are allowed for products having been shown in vivo not to depress plaque pH below 5.7, neither during nor for 30 minutes after the consumption. However, various chewing gum manufacturers have recently begun to make distinct health promotion claims, suggesting, e.g., reparative action or substitution for mechanical hygiene. The aim of this critical review--covering the effects of the physical properties of chewing gum and those of different ingredients both of conventional and of functional chewing gum--is to provide a set of guidelines for the interpretation of such claims and to assist oral health care professionals in counseling patients.

  2. Guar foaming albumin: a low molecular mass protein with high foaming activity and foam stability isolated from guar meal.

    PubMed

    Shimoyama, Ami; Kido, Shoko; Kinekawa, Yoh-ichi; Doi, Yukio

    2008-10-08

    The water extract of guar meal ( Cyamopsis tetragonolobus) was examined for its foamability. Compared with egg white, the extract showed an extraordinary foam stability: no drainage after 3 h of standing in contrast to 65% drainage for egg white at the same protein concentration. The acid-precipitated protein from the extract was responsible for the high foamability and designated guar foaming albumin (GFA). The foaming activity of GFA was 20 times higher than that of egg white. GFA consisted of two subunits with molecular masses of 6 and 11 kDa linked to each other through disulfide bonds. The cleavage of disulfide bonds in GFA affected the foamability only slightly. GFA remarkably decreased the surface tension of water at low protein concentrations. Immunoblotting analysis demonstrated that GFA did not react to the antisera from allergic patients against plant food. These results suggest that GFA serves as an effective food additive in developing protein-stabilized foam.

  3. The effect of autoclaving and enzyme supplementation of guar meal on the performance of chicks and laying hens.

    PubMed

    Patel, M B; McGinnis, J

    1985-06-01

    Four experiments with broilers and one with laying hens were conducted to study the effects of processing and hemicellulase supplementation of guar meal (37.0% protein) on growth, feed efficiency, and egg production. Guar meal at 0, 10, and 15%, either in raw form or autoclaved at 100, 102, or 132 C for 3, 15, or 30 min, was fed alone or in the presence of 0 to 250 ppm hemicellulase. In an experiment utilizing full-term broilers, 10 and 15% autoclaved guar meal was fed in the presence of lincomycin (3.3 ppm) or in combination with lincomycin and hemicellulase (25 ppm). The laying hen experiment was conducted with 36-week-old hens for 8 weeks. They were fed the raw or autoclaved meal (102 C, 15 min) alone and in combination with 30 ppm hemicellulase. The raw guar meal depressed growth and the depression was dose-related. Autoclaving at 102 C for 15 min increased growth and feed efficiency. A higher temperature or a longer time of autoclaving failed to give any further increase in growth or feed efficiency. The lowest (16.5 ppm) hemicellulase was as effective as the highest (250 ppm) in increasing growth and feed efficiency of chicks when added to guar meal diets. Penicillin had no effect on growth or feed efficiency when added to the diet containing autoclaved guar meal in the presence of hemicellulase. Dry heating at 150 C for 6 hr or water treatment of guar meal was not effective in stimulating growth or feed efficiency. Guar meal also increased stickiness of droppings; autoclaving enhanced the effect, whereas hemicellulase prevented the sticky droppings.(ABSTRACT TRUNCATED AT 250 WORDS)

  4. Effect of feeding guar meal on nutrient utilization and growth performance in Mahbubnagar local kids

    PubMed Central

    Janampet, Razia Sultana; Malavath, Kishan Kumar; Neeradi, Rajanna; Chedurupalli, Satyanarayana; Thirunahari, Raghunandan

    2016-01-01

    Aim: This study was conducted to evaluate the growth performance and nutrient digestibility of guar meal, an unconventional protein-rich feed ingredient in kids in comparison to conventional groundnut cake. Materials and Methods: A total of 18 kids were randomly allotted to three groups, and T1 group was fed on basal diet, T2 and T3 groups were offered diet replacing groundnut cake at 50% and 100% with guar meal, respectively, for a period of 120-day. At the end of the growth trial, a digestibility trial was conducted to evaluate the nutrient utilization. Results: There was no significant difference in dry matter intake among three groups. Nutrient digestibilities were significantly higher (p<0.05) in kids fed T2 ration with 50% replacement of groundnut cake with guar meal. Conclusion: It can be concluded that guar meal can be incorporated at 50% level in the concentrate mixture of goats replacing groundnut cake without any adverse effects. PMID:27847410

  5. Effect of feeding guar meal on nutrient utilization and growth performance in Mahbubnagar local kids.

    PubMed

    Janampet, Razia Sultana; Malavath, Kishan Kumar; Neeradi, Rajanna; Chedurupalli, Satyanarayana; Thirunahari, Raghunandan

    2016-10-01

    This study was conducted to evaluate the growth performance and nutrient digestibility of guar meal, an unconventional protein-rich feed ingredient in kids in comparison to conventional groundnut cake. A total of 18 kids were randomly allotted to three groups, and T1 group was fed on basal diet, T2 and T3 groups were offered diet replacing groundnut cake at 50% and 100% with guar meal, respectively, for a period of 120-day. At the end of the growth trial, a digestibility trial was conducted to evaluate the nutrient utilization. There was no significant difference in dry matter intake among three groups. Nutrient digestibilities were significantly higher (p<0.05) in kids fed T2 ration with 50% replacement of groundnut cake with guar meal. It can be concluded that guar meal can be incorporated at 50% level in the concentrate mixture of goats replacing groundnut cake without any adverse effects.

  6. Structural, thermal and rheological characterization of modified Dalbergia sissoo gum--A medicinal gum.

    PubMed

    Munir, Hira; Shahid, Muhammad; Anjum, Fozia; Mudgil, Deepak

    2016-03-01

    Dalbergia sissoo gum was purified by ethanol precipitation. The purified gum was modified and hydrolyzed. Gum was modified by performing polyacrylamide grafting and carboxymethylation methods. The hydrolysis was carried out by using mannanase, barium hydroxide and trifluoroacetic acid. The modified and hydrolyzed gums were characterized using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The decrease in viscosity was studied by performing the flow test. The modified and hydrolyzed gums were thermally stable as compared to crude gum. There was increase in crystallinity after modification and hydrolysis, determined through XRD. FTIR analysis exhibits no major transformation of functional group, only there was change in the intensity of transmittance. It is concluded that the modified and hydrolyzed gum can be used for pharmaceutical and food industry. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Assessment of hupu gum for its carrier property in the design and evaluation of solid mixtures of poorly water soluble drug - rofecoxib.

    PubMed

    Vadlamudi, Harini Chowdary; Raju, Y Prasanna; Asuntha, G; Nair, Rahul; Murthy, K V Ramana; Vulava, Jayasri

    2014-01-01

    There are no reports about the pharmaceutical applications of hupu gum (HG). Hence the present study was undertaken to test its suitability in the dissolution enhancement of poorly water soluble drug. Rofecoxib (RFB) was taken as model drug. For comparison solid mixtures were prepared with carriers such as poly vinyl pyrrolidone (PVP), sodium starch glycollate (SSG) and guar gum (GG). Physical mixing (PM), co-grinding (CG), kneading (KT) and solvent evaporation (SE) techniques were used to prepare the solid mixtures, using all the carriers in different carrier and drug ratios. The solid mixtures were characterized by powder X-ray diffraction (XRD) and Fourier-transformed infrared spectroscopy (FTIR). There was a significant improvement in the dissolution rate of solid mixtures of HG, when compared with the solid mixtures of other carriers. There was an increase in dissolution rate with increase in concentration of HG upto 1:1 ratio of carrier and drug. No drug-carrier interaction was found by FTIR studies. XRD studies indicated reduction in crystallinity of the drug with increase in HG concentration. Hence HG could be a useful carrier for the dissolution enhancement of poorly water soluble drugs.

  8. Controlled release of Lactobacillus rhamnosus biofilm probiotics from alginate-locust bean gum microcapsules.

    PubMed

    Cheow, Wean Sin; Kiew, Tie Yi; Hadinoto, Kunn

    2014-03-15

    Chitosan-coated alginate microcapsules containing high-density biofilm Lactobacillus rhamnosus have been previously shown to exhibit higher freeze drying- and thermal-tolerance than their planktonic counterparts. However, their cell release profile remains poor due to the capsules' susceptibility to the gastric environment. Herein the effects of adding locust bean (LB) and xanthan (XT) gums to alginate (AGN) capsules on the stress tolerance and cell release profiles in simulated gastrointestinal fluids are investigated. Compared to the AGN-only capsules, the AGN-LB capsules exhibit improved stress tolerance (i.e. ≈ 6x for freeze drying, 100x for thermotolerance, 10x for acid), whereas the AGN-XT capsules only improve the acid tolerance. Importantly, the AGN-LB capsules possess the optimal cell release profile with a majority of cells released in the simulated intestinal juice than in the gastric juice. The AGN-LB capsules' superiority is attributed to their stronger interaction with the chitosan coating and high swelling capacity, thus delaying their bulk dissolution. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Flow behavior characteristics of ice cream mix made with buffalo milk and various stabilizers.

    PubMed

    Minhas, Kuldip S; Sidhu, Jiwan S; Mudahar, Gurmail S; Singh, A K

    2002-01-01

    Ice cream made with buffalo milk, using optimum levels of various stabilizers of plant origin, was evaluated for its flow behavior characteristics, with the objective of producing an acceptable quality product. The minimum variation in the viscosity of mix was observed at three rates of shear (348.88, 523.33 and 1046.66 S(-1)) for all ice cream mixes. The flow behavior index (n) of all the mixes having optimum levels of various stabilizers was observed to be less than 1; indicating their pseudoplastic nature. Consistency coefficient (m) of sodium alginate was found to be 1.19; highest among all the stabilizers, followed by gelatin (1.17), karaya (1.08), guar gum (0.75), acacia gum (0.70), ghatti gum (0.36), and the control (0.29). The consistency coefficient (m) signifies the apparent viscosity of the pseudoplastic fluid. The viscosity of the mixes having various stabilizers (optimum levels) was found to be in descending order: Sodium alginate, gelatin, karaya, guar gum, acacia, ghatti and control.

  10. Isolation and characterization of an active mannanase-producing anaerobic bacterium, Clostridium tertium KT-5A, from lotus soil.

    PubMed

    Kataoka, N; Tokiwa, Y

    1998-03-01

    Of 10 strains of mannanase-producing anaerobic bacteria isolated from soils and methanogenic sludges, Clostridium tertium KT-5A, which was isolated from lotus soil, produced high amounts of extracellular beta-1,4-mannanase. The isolate was an aerotolerant anaerobe without quinon systems; the cell growth cultivated with no addition of reducing agents was also stable. High yields of mannanase were obtained by inducing enzyme production with galactomannan guar gum and beef extract/peptone as carbon and nitrogen sources, respectively. Fermentation end products on galactomannan fermentation were formate, acetate, lactate, butyrate, carbon dioxide and hydrogen. The extracellular mannanase displayed high activity on galactomannans of locust bean gum galactose/mannose (G/M) ratio 1:4 and spino gum (G/M 1:3), but weak activity on guar gum galactomannan (G/M 1:2) and konjac glucomannan. As far as is known, this is the first report on the isolation of an active mannanase-producing anaerobic bacterium from natural environments.

  11. 21 CFR 184.1349 - Karaya gum (sterculia gum).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...; stabilizer and thickener, § 170.3(o)(28) of this chapter. All other food categories .002 Formulation aid... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Karaya gum (sterculia gum). 184.1349 Section 184.1349 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED...

  12. 21 CFR 184.1349 - Karaya gum (sterculia gum).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...; stabilizer and thickener, § 170.3(o)(28) of this chapter. All other food categories .002 Formulation aid... 21 Food and Drugs 3 2011-04-01 2011-04-01 false Karaya gum (sterculia gum). 184.1349 Section 184.1349 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED...

  13. 21 CFR 201.319 - Water-soluble gums, hydrophilic gums, and hydrophilic mucilloids (including, but not limited to...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Water-soluble gums, hydrophilic gums, and... Specific Labeling Requirements for Specific Drug Products § 201.319 Water-soluble gums, hydrophilic gums... been associated with the ingestion of water-soluble gums, hydrophilic gums, and hydrophilic mucilloids...

  14. Comparison of Alcian blue and total carbohydrate assays for quantitation of transparent exopolymer particles (TEP) in biofouling studies.

    PubMed

    Li, Xu; Skillman, Lucy; Li, Dan; Ela, Wendell P

    2018-04-15

    Transparent exopolymer particles (TEP) and their precursors are gel-like acidic polysaccharide particles. Both TEP precursors and TEP have been identified as causal factors in fouling of desalination and water treatment systems. For comparison between studies, it is important to accurately measure the amount and fouling capacity of both components. However, the accuracy and recovery of the currently used Alcian blue based TEP measurement of different surrogates and different size fractions are not well understood. In this study, we compared Alcian blue based TEP measurements with a total carbohydrate assay method. Three surrogates; xanthan gum, pectin and alginic acid; were evaluated at different salinities. Total carbohydrate concentrations of particulates (>0.4 μm) and their precursors (<0.4 μm, >10 kDa) varied depending on water salinity and method of recovery. As xanthan gum is the most frequently used surrogate in fouling studies, TEP concentration is expressed as xanthan gum equivalents (mg XG eq /L) in this study. At a salinity of 35 mg/L sea salt, total carbohydrate assays showed a much higher particulate TEP fraction for alginic acid (38%) compared to xanthan gum (9%) and pectin (12%). The concentrations of particulate TEP therefore may only represent ∼10% of the total mass; while precursor TEP represents ∼80% of the total TEP. This highlights the importance of reporting both particulate and precursor TEP for membrane biofouling studies. The calculated concentrations of TEP and their precursors in seawater samples are also highly dependent on type of surrogate and resulting calibration factor. A linear correlation between TEP recovery and calibration factor was demonstrated in this study for all three surrogates. The relative importance and accuracy of measurement method, particulate size, surrogate type, and recovery are described in detail in this study. Copyright © 2017. Published by Elsevier Ltd.

  15. Laboratory Investigation of Rheology and Infiltration Process of Non-Newtonian Fluids through Porous Media in a Non-Isothermal Flow Regime for Effective Remediation of Contaminants

    NASA Astrophysics Data System (ADS)

    Naseer, F.

    2017-12-01

    Contamination of soil and groundwater by adsorbent (persistent) contaminants have been a major concern. Mine tailings, Acid mine drainage, waste disposal areas, active or abandoned surface and underground mines are some major causes of soil and water contamination. It is need of the hour to develop cost effective and efficient remediation techniques for clean-up of soil and aquifers. The objective of this research is to study a methodology of using non-Newtonian fluids for effective remediation of adsorbent contaminants in porous media under non-isothermal flow regimes. The research comprises of three components. Since, non-Newtonian fluid rheology has not been well studied in cold temperatures, the first component of the objective is to expose a non-Newtonian fluid (Guar gum solution) to different temperatures ranging from 30 °C through -5 °C to understand the change in viscosity, shear strength and contact angle of the fluid. Study of the flow characteristic of non-Newtonian fluids in complex porous media has been limited. Hence, the second component of this study will focus on a comparison of flow characteristics of a Newtonian fluid, non-Newtonian fluid and a combination of both fluids in a glass-tube-bundle setup that will act as a synthetic porous media. The study of flow characteristics will also be done for different thermal regimes ranging from -5 °C to 30 °C. The third component of the research will be to compare the effectiveness Guar gum to remediate a surrogate adsorbed contaminant at a certain temperature from the synthetic porous media. Guar gum is biodegradable and hence it is benign to the environment. Through these experiments, the mobility and behavior of Guar gum under varying temperature ranges will be characterized and its effectiveness in removing contaminants from soils will be understood. The impact of temperature change on the fluid and flow stability in the porous medium will be examined in this research. Guar gum is good suspension

  16. Release behavior and bioefficacy of imazethapyr formulations based on biopolymeric hydrogels.

    PubMed

    Kumar, Vikas; Singh, Anupama; Das, T K; Sarkar, Dhruba Jyoti; Singh, Shashi Bala; Dhaka, Rashmi; Kumar, Anil

    2017-06-03

    Controlled release formulations of imazethapyr herbicide have been developed employing guar gum-g-cl-polyacrylate/bentonite clay hydrogel composite (GG-HG) and guar gum-g-cl-PNIPAm nano hydrogel (GG-NHG) as carriers, to assess the suitability of biopolymeric hydrogels as controlled herbicide release devices. The kinetics of imazethapyr release from the developed formulations was studied in water and it revealed that the developed formulations of imazethapyr behaved as slow release formulations as compared to commercial formulation. The calculated diffusion exponent (n) values showed that Fickian diffusion was the predominant mechanism of imazethapyr release from the developed formulations. Time for release of half of the loaded imazethapyr (t 1/2 ) ranged between 0.06 and 4.8 days in case of GG-NHG and 4.4 and 12.6 days for the GG-HG formulations. Weed control index (WCI) of GG-HG and GG-NHG formulations was similar to that of the commercial formulation and the herbicidal effect was observed for relatively longer period. Guar gum-based biopolymeric hydrogels in both macro and nano particle size range can serve as potential carriers in developing slow release herbicide formulations.

  17. Application of exopolysaccharides to improve the performance of ceramic bodies in the unidirectional dry pressing process

    NASA Astrophysics Data System (ADS)

    Caneira, Inês; Machado-Moreira, Bernardino; Dionísio, Amélia; Godinho, Vasco; Neves, Orquídia; Dias, Diamantino; Saiz-Jimenez, Cesareo; Miller, Ana Z.

    2015-04-01

    Ceramic industry represents an important sector of economic activity in the European countries and involves complex and numerous manufacturing processes. The unidirectional dry pressing process includes milling and stirring of raw materials (mainly clay and talc minerals) in aqueous suspensions, followed by spray drying to remove excess water obtaining spray-dried powders further subjected to dry pressing process (conformation). However, spray-dried ceramic powders exhibit an important variability in their performance when subjected to the dry pressing process, particularly in the adhesion to the mold and mechanical strength, affecting the quality of the final conformed ceramic products. Therefore, several synthetic additives (deflocculants, antifoams, binders, lubricants and plasticizers) are introduced in the ceramic slips to achieve uniform and homogeneous pastes, conditioning their rheological properties. However, an important variability associated with the performance of the conformed products is still reported. Exopolysaccharides or Extracellular Polymeric Substances (EPS) are polymers excreted by living organisms, such as bacteria, fungi and algae, which may confer unique and potentially interesting properties with potential industrial uses, such as viscosity control, gelation, and flocculation. Polysaccharides, such as pullulan, gellan, carrageenan and xanthan have found a wide range of applications in food, pharmaceutical, petroleum, and in other industries. The aim of this study was the assessment of exopolysaccharides as natural additives to optimize the performance of spray-dried ceramic powders during the unidirectional dry pressing process, replacing the synthetic additives used in the ceramic production process. Six exopolysaccharides, namely pullulan, gellan, xanthan gum, κappa- and iota-carrageenan, and guar gum were tested in steatite-based spray-dried ceramic powders at different concentrations. Subsequently, these ceramic powders were

  18. Nicotine Gum

    MedlinePlus

    ... every 1 to 2 hours for the first 6 weeks, followed by one piece every 2 to 4 hours for 3 weeks, ... chances of quitting smoking, chew at least 9 pieces of nicotine gum each day for the first 6 weeks.Chew nicotine gum slowly until you can ...

  19. Physicochemical Characterization and Thermodynamic Studies of Nanoemulsion-Based Transdermal Delivery System for Fullerene

    PubMed Central

    Basri, Mahiran; Tripathy, Minaketan; Abdul-Malek, Emilia

    2014-01-01

    Fullerene nanoemulsions were formulated in palm kernel oil esters stabilized by low amount of mixed nonionic surfactants. Pseudoternary phase diagrams were established in the colloidal system of PKOEs/Tween 80 : Span 80/water incorporated with fullerene as antioxidant. Preformulation was subjected to combination of high and low energy emulsification methods and the physicochemical characteristics of fullerene nanoemulsions were analyzed using electroacoustic spectrometer. Oil-in-water (O/W) nanoemulsions with particle sizes in the range of 70–160 nm were formed. The rheological characteristics of colloidal systems exhibited shear thinning behavior which fitted well into the power law model. The effect of xanthan gum (0.2–1.0%, w/w) and beeswax (1–3%, w/w) in the estimation of thermodynamics was further studied. From the energetic parameters calculated for the viscous flow, a moderate energy barrier for transport process was observed. Thermodynamic study showed that the enthalpy was positive in all xanthan gum and beeswax concentrations indicating that the formation of nanoemulsions could be endothermic in nature. Fullerene nanoemulsions with 0.6% or higher xanthan gum content were found to be stable against creaming and flocculation when exposed to extreme environmental conditions. PMID:25165736

  20. The addition of locust bean gum but not water delayed the gastric emptying rate of a nutrient semisolid meal in healthy subjects

    PubMed Central

    Darwiche, Gassan; Björgell, Ola; Almér, Lars-olof

    2003-01-01

    Background Most of the previous studies regarding the effects of gel-forming fibres have considered the gastric emptying of liquid or solid meals after the addition of pectin or guar gum. The influence of locust bean gum, on gastric emptying of nutrient semisolid meals in humans has been less well studied, despite its common occurrence in foods. Using a standardised ultrasound method, this study was aimed at investigating if the gastric emptying in healthy subjects could be influenced by adding locust been gum, a widely used thickening agent, or water directly into a nutrient semisolid test meal. Methods The viscosity of a basic test meal (300 g rice pudding, 330 kcal) was increased by adding Nestargel (6 g, 2.4 kcal), containing viscous dietary fibres (96.5%) provided as seed flour of locust bean gum, and decreased by adding 100 ml of water. Gastric emptying of these three test meals were evaluated in fifteen healthy non-smoking volunteers, using ultrasound measurements of the gastric antral area to estimate the gastric emptying rate (GER). Results The median value of GER with the basic test meal (rice pudding) was estimated at 63 %, (range 47 to 84 %), (the first quartile = 61 %, the third quartile = 69 %). Increasing the viscosity of the rice pudding by adding Nestargel, resulted in significantly lower gastric emptying rates (p < 0.01), median GER 54 %, (range 7 to 71 %), (the first quartile = 48 %, the third quartile = 60 %). When the viscosity of the rice pudding was decreased (basic test meal added with water), the difference in median GER 65 %, (range 38 to 79 %), (the first quartile = 56 %, the third quartile = 71 %) was not significantly different (p = 0.28) compared to the GER of the basic test meal. Conclusions We conclude that the addition of locust bean gum to a nutrient semisolid meal has a major impact on gastric emptying by delaying the emptying rate, but that the addition of water to this test meal has no influence on gastric emptying in healthy

  1. The addition of locust bean gum but not water delayed the gastric emptying rate of a nutrient semisolid meal in healthy subjects.

    PubMed

    Darwiche, Gassan; Björgell, Ola; Almér, Lars-Olof

    2003-06-06

    Most of the previous studies regarding the effects of gel-forming fibres have considered the gastric emptying of liquid or solid meals after the addition of pectin or guar gum. The influence of locust bean gum, on gastric emptying of nutrient semisolid meals in humans has been less well studied, despite its common occurrence in foods. Using a standardised ultrasound method, this study was aimed at investigating if the gastric emptying in healthy subjects could be influenced by adding locust been gum, a widely used thickening agent, or water directly into a nutrient semisolid test meal. The viscosity of a basic test meal (300 g rice pudding, 330 kcal) was increased by adding Nestargel (6 g, 2.4 kcal), containing viscous dietary fibres (96.5%) provided as seed flour of locust bean gum, and decreased by adding 100 ml of water. Gastric emptying of these three test meals were evaluated in fifteen healthy non-smoking volunteers, using ultrasound measurements of the gastric antral area to estimate the gastric emptying rate (GER). The median value of GER with the basic test meal (rice pudding) was estimated at 63%, (range 47 to 84%), (the first quartile = 61%, the third quartile = 69%). Increasing the viscosity of the rice pudding by adding Nestargel, resulted in significantly lower gastric emptying rates (p < 0.01), median GER 54%, (range 7 to 71%), (the first quartile = 48%, the third quartile = 60%). When the viscosity of the rice pudding was decreased (basic test meal added with water), the difference in median GER 65%, (range 38 to 79%), (the first quartile = 56%, the third quartile = 71%) was not significantly different (p = 0.28) compared to the GER of the basic test meal. We conclude that the addition of locust bean gum to a nutrient semisolid meal has a major impact on gastric emptying by delaying the emptying rate, but that the addition of water to this test meal has no influence on gastric emptying in healthy subjects.

  2. 21 CFR 184.1333 - Gum ghatti.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 3 2014-04-01 2014-04-01 false Gum ghatti. 184.1333 Section 184.1333 Food and....1333 Gum ghatti. (a) Gum ghatti (Indian gum) is an exudate from wounds in the bark of Anogeissus... cold 1-in-100 aqueous solution of the gum. An immediate, voluminous, opaque precipitate indicates...

  3. Gum Disease Symptoms

    MedlinePlus

    ... American Academy of Periodontology Names New Executive Director Marijuana Use Linked to Increased Gum Disease Risk Gum ... Bylaws Amendments AAP Grants Periodontal Societies AAP Member Benefits AAP Professional Education AAP Networking Opportunities AAP/Colgate ...

  4. Xanthanolides and xanthane epoxide derivatives from Xanthium strumarium.

    PubMed

    Mahmoud, A A

    1998-12-01

    From the aerial parts of Xanthium strumarium, three new xanthanolide and xanthane-type sesquiterpenoids, 11alpha,13-dihydroxanthatin, 4beta,5beta-epoxyxanthatin-1alpha,4alpha-endoperoxide, and 1beta,4beta,4alpha,5alpha-diepoxyxanth-11(13)-en-12-oic acid have been isolated, together with seven known compounds. The structures were determined by spectroscopic methods, particularly high resolution 1D, 2D NMR spectroscopy and NOE experiments.

  5. Consumption of guar gum and retrograded high-amylose corn resistant starch increases IL-10 abundance without affecting pro-inflammatory cytokines in the colon of pigs fed a high-fat diet.

    PubMed

    Fan, M Z; Archbold, T; Lackeyram, D; Liu, Q; Mine, Y; Paliyath, G

    2012-12-01

    Increases in dietary intake of viscous and nonviscous soluble fiber are reported to improve bowel health. However, related biological mechanisms are not very clear. This study was conducted to examine if colonic inflammation would occur in a typical Western diet model and determine if consumption of soluble fiber components would attenuate potential detrimental effects by differentially affecting colonic abundances of anti-inflammatory cytokine IL-10 and 2 pro-inflammatory cytokines tumor necrosis factor-alpha (TNF-α) and IL-6 in pigs fed a high-fat basal diet supplemented, respectively, with 15% viscous soluble fiber guar gum (GG) and 15% nonviscous soluble fiber, that is, retrograded high-amylose corn (Zea mays) resistant starch (RS). A total of 24 Yorkshire growing barrows were assigned into a standard corn and soybean (Glycine max) meal (SBM)-based grower diet as a positive control (PC), an animal protein-based high-fat basal diet as the negative control (NC), and 2 NC basal diets supplemented with 15% GG and 15% RS, respectively, according to a completely randomized block design for 4 wk. Abundance of these cytokines in homogenized and extracted colonic tissue supernatant samples was measured by ELISA. Although colonic IL-10 abundance was lower (P < 0.05) in the corn and SBM-based PC group than that in the high-fat basal NC group, there were no differences (P > 0.05) in colonic abundances of TNF-α and IL-6 between NC and PC groups and among all of the treatment groups. Compared with the NC group, consumption of GG and RS at 15% increased (P < 0.05) colonic IL-10 abundance. Moreover, there was no difference (P > 0.05) in colonic IL-10 abundance between the 15% GG and the 15% RS groups. Thus, consumption of a typical high-fat Western diet did not induce colonic inflammation. Diets supplemented with 15% GG or 15% RS may protect the colon from developing inflammation by enhancing IL-10 abundance.

  6. Bioadhesive hydrogels for cosmetic applications.

    PubMed

    Parente, M E; Ochoa Andrade, A; Ares, G; Russo, F; Jiménez-Kairuz, Á

    2015-10-01

    The use of bioadhesive hydrogels for skin care presents important advantages such as long residence times on the application site and reduced product administration frequency. The aim of the present work was to develop bioadhesive hydrogels for skin application, using caffeine as a model active ingredient. Eight hydrogels were formulated using binary combinations of a primary polymer (carbomer homopolymer type C (Carbopol(®) 980) or kappa carrageenan potassium salt (Gelcarin(®) GP-812 NF)) and a secondary polymer (carbomer copolymer type B (Pemulen(™) TR-1), xanthan gum or guar gum). Hydrogels were characterized by means of physico-chemical (dynamic rheological measurements, spreadability and adhesion measurements) and sensory methods (projective mapping in combination with a check-all-that-apply (CATA) question). Caffeine hydrogels were formulated using two of the most promising formulations regarding adhesion properties and sensory characteristics. In vitro active ingredient release studies were carried out. Hydrogel formulations showed a prevalently elastic rheological behaviour. Complex viscosity of carbomer homopolymer type C hydrogels was higher than that of the kappa carrageenan hydrogels. Besides, complex viscosity values were dependent on the secondary polymer present in the formulation. Significant differences among hydrogels were found in detachment force, work of adhesion and spreading diameter results. Association of projective mapping with CATA allowed to determine similarities and dissimilarities among samples. Cluster analysis associated the samples in two groups. Two hydrogels were selected to study the release of caffeine. Both hydrogels presented similar release profiles which were well described by the Higuchi model. Caffeine release was exclusively controlled by a diffusive process. Physico-chemical and sensory techniques enabled the identification of bioadhesive hydrogel formulations with positive characteristics for cosmetic applications

  7. Rheological and interfacial properties at the equilibrium of almond gum tree exudate (Prunus dulcis) in comparison with gum arabic.

    PubMed

    Mahfoudhi, Nesrine; Sessa, Mariarenata; Ferrari, Giovanna; Hamdi, Salem; Donsi, Francesco

    2016-06-01

    Almond gum contains an arabinogalactan-type polysaccharide, which plays an important role in defining its interfacial and rheological properties. In this study, rheological and interfacial properties of almond gum and gum arabic aqueous dispersions were comparatively investigated. The interfacial tension of almond gum and gum arabic aqueous dispersions was measured using the pendant drop method in hexadecane. The asymptotic interfacial tension values for almond gum were significantly lower than the corresponding values measured for gum arabic, especially at high concentration. Rheological properties were characterized by steady and oscillatory tests using a coaxial geometry. Almond gum flow curves exhibited a shear thinning non-Newtonian behavior with a tendency to a Newtonian plateau at low shear rate, while gum arabic flow curves exhibited such behavior only at high shear rate. The influence of temperature (5-50  ℃) on the flow curves was studied at 4% (m/m) gum concentration and the Newtonian viscosities at infinite and at zero shear rate, for gum arabic and almond gum, respectively, were accurately fitted by an Arrhenius-type equation. The dynamic properties of the two gum dispersions were also studied. Both gum dispersions exhibited viscoelastic properties, with the viscous component being predominant in a wider range of concentrations for almond gum, while for gum arabic the elastic component being higher than the elastic one especially at higher concentrations.The rheological and interfacial tension properties of almond gum suggest that it may represent a possible substitute of gum arabic in different food applications. © The Author(s) 2015.

  8. 21 CFR 184.1333 - Gum ghatti.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Gum ghatti. 184.1333 Section 184.1333 Food and... Substances Affirmed as GRAS § 184.1333 Gum ghatti. (a) Gum ghatti (Indian gum) is an exudate from wounds in..._locations.html.), to 5 ml of a cold 1-in-100 aqueous solution of the gum. An immediate, voluminous, opaque...

  9. 21 CFR 184.1333 - Gum ghatti.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Gum ghatti. 184.1333 Section 184.1333 Food and... Substances Affirmed as GRAS § 184.1333 Gum ghatti. (a) Gum ghatti (Indian gum) is an exudate from wounds in..._locations.html.), to 5 ml of a cold 1-in-100 aqueous solution of the gum. An immediate, voluminous, opaque...

  10. Influence of polysaccharides on the rheology and stabilization of α-pinene emulsions.

    PubMed

    García, Ma Carmen; Alfaro, Ma Carmen; Calero, Nuria; Muñoz, José

    2014-05-25

    This work focuses on the need to include polysaccharides in a slightly concentrated O(α-pinene)/W emulsion, formulated with amphiphilic copolymers as emulsifiers. Rheology, laser diffraction and multiple light scattering were the main techniques used to assess the performance of gellan gum, xanthan gum and a mixture of both hydrocolloids as stabilizers. Small amplitude oscillatory shear results were consistent with the existence of three distinct microstructures and relaxation mechanisms, which depended on the hydrocolloid system used. The mechanical spectrum of the emulsion containing both polysaccharides signalled the occurrence of thermodynamic incompatibility between the two. Flow curves fitted to the Carreau-Yasuda model demonstrated a negative synergistic effect between gellan and xanthan gums. The droplet size distribution was similar for these systems, which highlighted the importance of the continuous phase for emulsion stability. Multiple light scattering illustrated that creaming was practically eliminated by the incorporation of polysaccharides, coalescence being the main destabilization mechanism. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. Impact of gastric pH profiles on the proteolytic digestion of mixed βlg-Xanthan biopolymer gels.

    PubMed

    Dekkers, B L; Kolodziejczyk, E; Acquistapace, S; Engmann, J; Wooster, T J

    2016-01-01

    The understanding of how foods are digested and metabolised is essential to enable the design/selection of foods as part of a balanced diet. Essential to this endeavour is the development of appropriate biorelevant in vitro digestion tools. In this work, the influence of gastric pH profile on the in vitro digestion of mixtures of β-lactoglobulin (βlg) and xanthan gum prior to and after heat induced gelation was investigated. A conventional highly acidic (pH 1.9) gastric pH profile was compared to two dynamic gastric pH profiles (initial pH of 6.0 vs. 5.2 and H(+) secretion rates of 60 vs. 36 mmol h(-1)) designed to mimic the changes in gastric pH observed during clinical trials with high protein meals. In moving away from the pH 1.9 model, to a pH profile reflecting in vivo conditions, the initial rate and degree of protein digestion halved during the first 45 minutes. After 90 minutes of gastric digestion, all three pH profiles caused similar extents of protein digestion. Given that 50% gastric emptying times of (test) meals are in range of 30-90 min, it would seem highly relevant to use a dynamic pH gastric model rather than a pH 1.9 (USP) or pH 3 model (INFOGEST) in assessing the impact of food structuring approaches on protein digestion. The impact that heat induced gelation had on the degree of gel digestion by pepsin was also investigated. Surprisingly, it was found that heat induced gelation of βlg-xanthan mixtures at 70-90 °C for 20 minutes lead to a considerable decrease in the rate of proteolysis, which contrasts many studies of dispersed aggregates and gels of βlg alone whose heating accelerates pepsin activity due to unfolding. In the present case, the formation of a dense protein network created a fine pore structure which restricted pepsin access into the gel thereby slowing proteolysis. This work not only has implications for the in vitro assessment of protein digestion, but also highlights how protein digestion might be slowed, learnings that

  12. Nanoemulsion-based electrolyte triggered in situ gel for ocular delivery of acetazolamide.

    PubMed

    Morsi, Nadia; Ibrahim, Magdy; Refai, Hanan; El Sorogy, Heba

    2017-06-15

    In the present work the antiglaucoma drug, acetazolamide, was formulated as an ion induced nanoemulsion-based in situ gel for ocular delivery aiming a sustained drug release and an improved therapeutic efficacy. Different acetazolamide loaded nanoemulsion formulations were prepared using peanut oil, tween 80 and/or cremophor EL as surfactant in addition to transcutol P or propylene glycol as cosurfactant. Based on physicochemical characterization, the nanoemulsion formulation containing mixed surfactants and transcutol P was selected to be incorporated into ion induced in situ gelling systems composed of gellan gum alone and in combination with xanthan gum, HPMC or carbopol. The nanoemulsion based in situ gels showed a significantly sustained drug release in comparison to the nanoemulsion. Gellan/xanthan and gellan/HPMC possessed good stability at all studied temperatures, but gellan/carbopol showed partial drug precipitation upon storage and was therefore excluded from the study. Gellan/xanthan and gellan/HPMC showed higher therapeutic efficacy and more prolonged intraocular pressure lowering effect relative to that of commercial eye drops and oral tablet. Gellan/xanthan showed superiority over gellan/HPMC in all studied parameters and is thus considered as a promising mucoadhesive nanoemulsion-based ion induced in situ gelling formula for topical administration of acetazolamide. Copyright © 2017. Published by Elsevier B.V.

  13. Hydration, erosion, and release behavior of guar-based hydrophilic matrix tablets containing total alkaloids of Sophora alopecuroides.

    PubMed

    Zhao, Wenchang; Song, Lijun; Deng, Hongzhu; Yao, Hui

    2009-05-01

    It is a challenge to deliver water-soluble drug based on hydrophilic matrix to colon because of swelling and erosion of polysaccharides in contact with media. In our study, guar-based hydrophilic matrix tablets containing water-soluble total alkaloids of Sophora alopecuroides prepared by wet granulation technique were evaluated. A novel method was established to investigate the changes of swelling and volume for guar-based tablets in undynamic state, which generally showed a rapid swelling and volume change in the first 9 h, then the hydrated speed slowed down. On the other hand, the influence of different pH of the media on water uptake and erosion of various guar-based formulations in dynamic state indicated that the hydrated constants in simulated gastric fluid (SGF) was higher than that in SIF, which followed varied mechanism of water penetration by fitting Davidson and Peppas model. The extent of erosion was between 22.4 and 32.6% in SIF within 360 min. In vitro sophoridine release studies in successive different mimicking media showed that the guar matrix tablets released 13.5-25.6% of sophoridine in the first 6 h; therefore it was necessary to develop the bilayer matrix tablet by direct-compressing coating 100 mg guar granula on core tablet. The initial release of coated tablet was retarded and the bilayer matrix tablet was suitable for colon target.

  14. What Happens to Swallowed Gum?

    MedlinePlus

    ... chew a lot of sugary gum. But the human digestive tract can't digest the gum resin. It's moved through the digestive tract by the normal pushing (peristaltic) actions of the gut. The gum's journey ends during a trip to ...

  15. Discrimination of orange beverage emulsions with different formulations using multivariate analysis.

    PubMed

    Mirhosseini, Hamed; Tan, Chin Ping

    2010-06-01

    The constituents in a food emulsion interact with each other, either physically or chemically, determining the overall physico-chemical and organoleptic properties of the final product. Thus, the main objective of present study was to investigate the effect of emulsion components on beverage emulsion properties. In most cases, the second-order polynomial regression models with no significant (P > 0.05) lack of fit and high adjusted coefficient of determination (adjusted R(2), 0.851-0.996) were significantly fitted to explain the beverage emulsion properties as function of main emulsion components. The main effect of gum arabic was found to be significant (P < 0.05) in all response regression models. Orange beverage emulsion containing 222.0 g kg(-1) gum arabic, 2.4 g kg(-1) xanthan gum and 152.7 g kg(-1) orange oil was predicted to provide the desirable emulsion properties. The present study suggests that the concentration of gum arabic should be considered as a primary critical factor for the formulation of orange beverage emulsion. This study also indicated that the interaction effect between xanthan gum and orange oil showed the most significant (P < 0.05) effect among all interaction effects influencing all the physicochemical properties except for density. Copyright (c) 2010 Society of Chemical Industry.

  16. Development of Low-Fat Soft Dough Biscuits Using Carbohydrate-Based Fat Replacers

    PubMed Central

    Singh, Gurmukh; Kumbhar, B. K.

    2013-01-01

    Experiments were conducted to develop low-fat soft dough biscuits using carbohydrate-based fat replacers (maltodextrin and guar gum). A central composite rotatable design was used to optimise the level of sugar 24–36%, composite fat (fat 10.5–24.5%, maltodextrin 10.4–24%, and guar gum 0.1–0.5%), ammonium bicarbonate 0.5–2.5%, and water 20–24% for production of low-fat biscuits. Diameter (P < 0.01) and stress-strain ratio (P < 0.05) decreased significantly with increase in the amount of sugar. There was a significant decrease (P < 0.01) in spread ratio at high amount of water. Hardness was significantly affected by the interactions of ammonium bicarbonate with sugar (P < 0.05) and fat (P < 0.1). The optimum level of ingredients obtained for low-fat biscuits was sugar 31.7 g, fat 13.55 g, maltodextrin 21.15 g, guar gum 0.3 g, ammonium bicarbonate 2.21 g, and water 21 mL based on 100 g flour. The fat level in the optimised low-fat biscuit formulation was found to be 8.48% as compared to 22.65% in control; therefore, the reduction in fat was 62.5%. PMID:26904603

  17. 21 CFR 582.7349 - Sterculia gum.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Sterculia gum. 582.7349 Section 582.7349 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7349 Sterculia gum. (a) Product. Sterculia gum (karaya gum). (b) Conditions of use. This substance is generally...

  18. 21 CFR 582.7349 - Sterculia gum.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Sterculia gum. 582.7349 Section 582.7349 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7349 Sterculia gum. (a) Product. Sterculia gum (karaya gum). (b) Conditions of use. This substance is generally...

  19. 21 CFR 582.7349 - Sterculia gum.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Sterculia gum. 582.7349 Section 582.7349 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7349 Sterculia gum. (a) Product. Sterculia gum (karaya gum). (b) Conditions of use. This substance is generally...

  20. Assessing DNA recovery from chewing gum.

    PubMed

    Eychner, Alison M; Schott, Kelly M; Elkins, Kelly M

    2017-01-01

    The purpose of this study was to evaluate which DNA extraction method yields the highest quantity of DNA from chewing gum. In this study, several popular extraction methods were tested, including Chelex-100, phenol-chloroform-isoamyl alcohol (PCIA), DNA IQ, PrepFiler, and QIAamp Investigator, and the quantity of DNA recovered from chewing gum was determined using real-time polymerase chain reaction with Quantifiler. Chewed gum control samples were submitted by anonymous healthy adult donors, and discarded environmental chewing gum samples simulating forensic evidence were collected from outside public areas (e.g., campus bus stops, streets, and sidewalks). As expected, results indicate that all methods tested yielded sufficient amplifiable human DNA from chewing gum using the wet-swab method. The QIAamp performed best when DNA was extracted from whole pieces of control gum (142.7 ng on average), and the DNA IQ method performed best on the environmental whole gum samples (29.0 ng on average). On average, the QIAamp kit also recovered the most DNA from saliva swabs. The PCIA method demonstrated the highest yield with wet swabs of the environmental gum (26.4 ng of DNA on average). However, this method should be avoided with whole gum samples (no DNA yield) due to the action of the organic reagents in dissolving and softening the gum and inhibiting DNA recovery during the extraction.

  1. Structure of guar in solutions of H{sub 2}O and D{sub 2}O: An ultra-small-angle light-scattering study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gittings, M.R.; Cipelletti, L.; Trappe, V.

    2000-05-11

    The authors examine the structure of guar as a function of concentration in both H{sub 2}O and D{sub 2}O using several different scattering techniques. The range of scattering vectors spans 5 decades (143 cm{sup {minus}1} < q < 10.3 x 10{sup 6} cm{sup {minus}1}), providing insight into the supramolecular and local organization of the chains. This allows direct characterization of the large-scale aggregate structure of the guar, which can be on the order of 100 {micro}m. The aggregates are most likely loosely interconnected with single chains and other aggregates, and the structure and organization are critical in determining solution viscoelasticmore » properties. The solubility is poorer in D{sub 2}O as evidenced by larger aggregates, higher scattering intensities, a slightly higher fractal dimension, and a sublinear concentration dependence of the intensity. Aggregates were found in dilute neutral guar solutions as well as in cationic guar solutions (in H{sub 2}O), whether screened or unscreened. The presence of aggregates at all concentrations for neutral and charged guar indicates the difficulty in determining a molecular weight of the guar molecule.« less

  2. Effects of drilling fluids on soils and plants: I. Individual fluid components

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Miller, R.W.; Honarvar, S.; Hunsaker, B.

    1980-01-01

    The effects of 31 drilling fluid (drilling mud) components on the growth of green beans (Phaseolus vulgaris L., Tendergreen) and sweet corn (Zea may var. saccharata (Sturtev.) Bailey, Northrup King 199) were evaluated in greenhouse studies. Plants grew well in fertile Dagor silt loam soil (Cumulic Haploxeroll) when the soil was mixed with most soil-component mixtures at disposal proportions normally expected. Vinyl acetate and maleic acid polymer (VAMA) addition caused significantly increased growth at the 95% confidence level. No statistically significant depression of plant growth occurred at normal rates with asbestos, asphalt, barite, bentonite, calcium lignosulfonate, sodium polyacrylate, a modifiedmore » tannin, ethoxylated nonylphenol, a filming amine, gilsonite, a Xanthan gum, paraformaldehyde, a pipe dope, hydrolized polyacrylamide, sodium acid pyrophosphate, sodium carboxymethyl cellulose, sodium hydroxide added as pellets, and a sulfonated tall oil. Statistically significant reductions in plant yields (at the 95% confidence level) occurred at normal disposal rates with a long-chained aliphatic alcohol, sodium dichromate, diesel oil, guar gum, an iron chromelignosulfonate, lignite, a modified asphalt, a plant fibersynthetic fiber mixture, lignite, a nonfermenting starch, potassium chloride, pregelatinized starch, and sulfated triglyceride. Thirteen drilling fluid components added individually to a fluid base (water, bentonite, and barite) and then to soil were also tested for their effect on plant growth. Only the sulfated triglyceride (Torq-Trim) and the long-chain (high molecular weight) alcohol (Drillaid 405) caused no plant growth reductions at either rate added. The modified tannin (Desco) caused minimal reduction in bean growth only when added to soil in excess levels.« less

  3. An acoustic method for predicting relative strengths of cohesive sediment deposits

    NASA Astrophysics Data System (ADS)

    Reed, A. H.; Sanders, W. M.

    2017-12-01

    Cohesive sediment dynamics are fundamentally determined by sediment mineralogy, organic matter composition, ionic strength of water, and currents. These factors work to bind the cohesive sediments and to determine depositional rates. Once deposited the sediments exhibit a nonlinear response to stress and they develop increases in shear strength. Shear strength is critically important in resuspension, transport, creep, and failure predictions. Typically, shear strength is determined by point measurements, both indirectly from free-fall penetrometers or directly on cores with a shear vane. These values are then used to interpolate over larger areas. However, the remote determination of these properties would provide continuos coverage, yet it has proven difficult with sonar systems. Recently, findings from an acoustic study on cohesive sediments in a laboratory setting suggests that cohesive sediments may be differentiated using parametric acoustics; this method pulses two primary frequencies into the sediment and the resultant difference frequency is used to determine the degree of acoustic nonlinearity within the sediment. In this study, two marine clay species, kaolinite and montmorillonite, and two biopolymers, guar gum and xanthan gum were mixed to make nine different samples. The samples were evaluated in a parametric acoustic measurement tank. From the parametric acoustic measurements, the quadratic nonlinearity coefficient (beta) was determined. beta was correlated with the cation exchange capacity (CEC), an indicator of shear strength. The results indicate that increased acoustic nonlinearity correlates with increased CEC. From this work, laboratory measurements indicate that this correlation may be used evaluate geotechnical properties of cohesive sediments and may provide a means to predict sediment weakness in subaqueous environments.

  4. One hundred years of commercial food carbohydrates in the United States.

    PubMed

    BeMiller, James N

    2009-09-23

    Initiation and development of the industries producing specialty starches, modified food starches, high-fructose sweeteners, and food gums (hydrocolloids) over the past century provided major ingredients for the rapid and extensive growth of the processed food and beverage industries. Introduction of waxy maize starch and high-amylose corn starch occurred in the 1940s and 1950s, respectively. Development and growth of the modified food starch industry to provide ingredients with the functionalities required for the fast-growing processed food industry were rapid during the 1940s and 1950s. The various reagents used today for making cross-linked and stabilized starch products were introduced between 1942 and 1961. The initial report of enzyme-catalyzed isomerization of glucose to fructose was made in 1957. Explosive growth of high-fructose syrup manufacture and use occurred between 1966 and 1984. Maltodextrins were introduced between 1967 and 1973. Production of methylcelluloses and carboxymethylcelluloses began in the 1940s. The carrageenan industry began in the 1930s and grew rapidly in the 1940s and 1950s; the same is true of the development and production of alginate products. The guar gum industry developed in the 1940s and 1950s. The xanthan industry came into being during the 1950s and 1960s. Microcrystalline cellulose was introduced in the 1960s. Therefore, most carbohydrate food ingredients were introduced in about a 25 year period between 1940 and 1965. Exceptions are the introduction of maltodextrins and major developments in the high-fructose syrup industry, which occurred in the 1970s.

  5. A Study of the Drag Characteristics and Polymer Diffusion in the Boundary Layer of an Axisymmetric Body

    DTIC Science & Technology

    1976-03-12

    Reduction in Pipe Flow at R =14xl03 (from Hoyt (1972)) Guar Gum Karaya Polyox WSR 301 400 850 10 Polyacrylamide, Polyhall-250 20 21 ■.I...shown to be effec- tive drag reducers. Polysaccharides ( Guar ), polyethylene oxide, polyacrylamides, and sodium carboxymethyl...sifting the premeasured polyox powder onto the surface of the carefully weighed water which was being slowly stirred by a magnetic mixing bar. After a

  6. Plant gum identification in historic artworks

    PubMed Central

    Granzotto, Clara; Arslanoglu, Julie; Rolando, Christian; Tokarski, Caroline

    2017-01-01

    We describe an integrated and straightforward new analytical protocol that identifies plant gums from various sample sources including cultural heritage. Our approach is based on the identification of saccharidic fingerprints using mass spectrometry following controlled enzymatic hydrolysis. We developed an enzyme cocktail suitable for plant gums of unknown composition. Distinctive MS profiles of gums such as arabic, cherry and locust-bean gums were successfully identified. A wide range of oligosaccharidic combinations of pentose, hexose, deoxyhexose and hexuronic acid were accurately identified in gum arabic whereas cherry and locust bean gums showed respectively PentxHexy and Hexn profiles. Optimized for low sample quantities, the analytical protocol was successfully applied to contemporary and historic samples including ‘Colour Box Charles Roberson & Co’ dating 1870s and drawings from the American painter Arthur Dove (1880–1946). This is the first time that a gum is accurately identified in a cultural heritage sample using structural information. Furthermore, this methodology is applicable to other domains (food, cosmetic, pharmaceutical, biomedical). PMID:28425501

  7. Alginate Beads Containing Lactase: Stability and Microstructure.

    PubMed

    Traffano-Schiffo, Maria Victoria; Aguirre Calvo, Tatiana R; Castro-Giraldez, Marta; Fito, Pedro J; Santagapita, Patricio R

    2017-06-12

    β-Galactosidase (lactase) is a widely used enzyme in the food industry; however, it has low stability against thermal and mechanical treatments. Due to this, the purpose of the present research was to analyze the encapsulation of lactase in alginate-Ca(II) beads in order to maintain its enzymatic activity toward freezing, freezing/thawing, and storage. Also, the effect of the addition of trehalose, and arabic and guar gums and their influence on the microstructure as well as on thermal properties and molecular mobility were studied. Lactase was successfully encapsulated in alginate-Ca(II) beads, and the inclusion of trehalose was critical for activity preservation toward treatments, being improved in guar gum-containing systems. The gums increased the T m ' values, which represents a valuable technological improvement. Finally, the presence of secondary excipients affected the microstructure, showing rods with smaller outer diameter and with lower compactness than alginate-Ca(II) beads. Also, bead composition greatly affects the size, shape, and relaxation times.

  8. Gum Disease in Children

    MedlinePlus

    ... American Academy of Periodontology Names New Executive Director Marijuana Use Linked to Increased Gum Disease Risk Gum ... Bylaws Amendments AAP Grants Periodontal Societies AAP Member Benefits AAP Professional Education AAP Networking Opportunities AAP/Colgate ...

  9. Gum Disease and Men

    MedlinePlus

    ... American Academy of Periodontology Names New Executive Director Marijuana Use Linked to Increased Gum Disease Risk Gum ... Bylaws Amendments AAP Grants Periodontal Societies AAP Member Benefits AAP Professional Education AAP Networking Opportunities AAP/Colgate ...

  10. Gum Disease and Women

    MedlinePlus

    ... American Academy of Periodontology Names New Executive Director Marijuana Use Linked to Increased Gum Disease Risk Gum ... Bylaws Amendments AAP Grants Periodontal Societies AAP Member Benefits AAP Professional Education AAP Networking Opportunities AAP/Colgate ...

  11. Mind Your Mouth: Preventing Gum Disease

    MedlinePlus

    ... can lead to gum disease—technically known as periodontal disease. The most common and mild type of ... up and professional cleaning. Don’t smoke. Links Periodontal (Gum) Disease NIH Senior Health: Gum Disease Taking ...

  12. Gel sealants for the mitigation of spontaneous heatings in coal mines. Report of investigations/1995

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Miron, Y.

    1995-12-31

    The U.S. Bureau of Mines evaluated three sealant systems for this purpose, bentonite-water mixtures, silicate gel, and guar gum gels. The guar gum-based gel was the only sealant that possessed the desired properties of elasticity, ease of preparation, adaptability to the mine, and a long life. In addition, since the gel consists mostly of water, it could quench or cool nearby heatings. Optimal formulations were determined in laboratory tests, and then tested in the U.S. Bureau of Mines` Safety Research Coal Mine. Two formulations resulted in stable gels that lasted for at least 12 months in the mine. Semi-continuous preparationmore » of gel using an eductor was evaluated and appears feasible.« less

  13. Effect of GutsyGum(tm), A Novel Gum, on Subjective Ratings of Gastro Esophageal Reflux Following A Refluxogenic Meal.

    PubMed

    Brown, Rachel; Sam, Cecilia H Y; Green, Tim; Wood, Simon

    2015-06-01

    Chewing gum alleviates symptoms of gastro-esophageal reflux (GER) following a refluxogenic meal. GutsyGum(tm), a chewing gum developed to alleviate the symptoms of GER contains calcium carbonate, with a proprietary blend of licorice extract, papain, and apple cider vinegar (GiGs®). The efficacy of GutsyGum(tm) was determined in alleviating the symptoms of GER after a refluxogenic meal compared to placebo gum. This double-blind, placebo-controlled-crossover trial with a one-week washout between treatments had 24 participants with a history of GER consume a refluxogenic meal and then chew GutsyGum(tm) or placebo gum. Participants completed GER symptom questionnaires, consisting of symptom based 10 cm Visual Analogue Scales, immediately following the meal and then at regular intervals out to four hours postmeal. Adjusted mean ± SEM heartburn score (15-min postmeal to 240 min) was significantly lower in GutsyGum(tm) than in placebo gum treatment (0.81 ± 0.20 vs. 1.45 ± 0.20 cm; p = 0.034). Mean acid reflux score was significantly lower in GutsyGum(tm) than in placebo treatment (0.72 ± 0.19 vs. 1.46 ± 0.19 cm; p = 0.013). There were no significant differences for any of the secondary outcomes. However, pain approached significance with less pain reported in GutsyGum(tm) versus placebo treatment (0.4 ± 0.2 vs. 0.9 ± 0.2 cm; p = 0.081). Although nausea (p = 0.114) and belching (p = 0.154) were lower following GutsyGum(tm), the difference was not statistically significant. GutsyGum(tm) is more effective than a placebo gum in alleviating primary symptoms of heartburn and acid reflux (Clinical Trial Registration: ACTRN12612000973819).

  14. Use of two-surfactants mixtures to attain specific HLB values for assisted TPH-diesel biodegradation.

    PubMed

    Torres, Luis G; Rojas, Neftalí; Iturbe, Rosario

    2004-01-01

    In a surfactant assisted biodegradation process, the choice of surfactant(s) is of crucial importance. The question is: does the type of surfactant (i.e. chemical family) affect the biodegradation process at fixed hidrophillic-lypofillic balance (HLB) values? Microcosm assessments were developed using contaminated soil, with around of 5000 mg/kg of hydrocarbons as TPH-diesel. Mixtures of three nonionic surfactants were employed to get a wide range of specific HLB values. Tween20 and Span20 were mixed in the appropriate proportions to get HLB values between 8.6 and 16.7. Tween/Span60 mixtures reached HLB values between 4.7 and 14.9. Finally, Tween/Span80 combinations yielded HLB values between 4.3 and 15. TPH-diesel biodegradation was measured at the beginning, and after 8 weeks, as well as the FCU/gr(soil), as a measure of microorganisms' development during the biodegradation period. A second aim of this work was to assess the use of guar gum as a biodegradation enhancer instead of synthetic products. The conclusions of this work are that surfactant chemical family, and not only the HLB value clearly affects the assisted biodegradation rate. Surfactant's synergism was clearly observed. Regarding the use of guar gum, no biodegradation enhancement was observed for the three assessed concentrations, i.e., 2, 20, and 200 mg/kg, respectively. On the contrary, TPH-diesel removal was lower as the gum concentration increased. It is quite possible that guar gum was used as a microbial substrate.

  15. Design, formulation and evaluation of caffeine chewing gum.

    PubMed

    Aslani, Abolfazl; Jalilian, Fatemeh

    2013-01-01

    Caffeine which exists in drinks such as coffee as well as in drug dosage forms in the global market is among the materials that increase alertness and decrease fatigue. Compared to other forms of caffeine, caffeine gum can create faster and more prominent effects. In this study, the main goal is to design a new formulation of caffeine gum with desirable taste and assess its physicochemical properties. Caffeine gum was prepared by softening of gum bases and then mixing with other formulation ingredients. To decrease the bitterness of caffeine, sugar, aspartame, liquid glucose, sorbitol, manitol, xylitol, and various flavors were used. Caffeine release from gum base was investigated by mechanical chewing set. Content uniformity test was also performed on the gums. The gums were evaluated in terms of organoleptic properties by the Latin-Square design at different stages. After making 22 formulations of caffeine gums, F11 from 20 mg caffeine gums and F22 from 50 mg caffeine gums were chosen as the best formulation in organoleptic properties. Both types of gum released about 90% of their own drug content after 30 min. Drug content of 20 and 50 mg caffeine gum was about 18.2-21.3 mg and 45.7-53.6 mg respectively. In this study, 20 and 50 mg caffeine gums with suitable and desirable properties (i.e., good taste and satisfactory release) were formulated. The best flavor for caffeine gum was cinnamon. Both kinds of 20 and 50 mg gums succeeded in content uniformity test.

  16. Design, formulation and evaluation of caffeine chewing gum

    PubMed Central

    Aslani, Abolfazl; Jalilian, Fatemeh

    2013-01-01

    Background: Caffeine which exists in drinks such as coffee as well as in drug dosage forms in the global market is among the materials that increase alertness and decrease fatigue. Compared to other forms of caffeine, caffeine gum can create faster and more prominent effects. In this study, the main goal is to design a new formulation of caffeine gum with desirable taste and assess its physicochemical properties. Materials and Methods: Caffeine gum was prepared by softening of gum bases and then mixing with other formulation ingredients. To decrease the bitterness of caffeine, sugar, aspartame, liquid glucose, sorbitol, manitol, xylitol, and various flavors were used. Caffeine release from gum base was investigated by mechanical chewing set. Content uniformity test was also performed on the gums. The gums were evaluated in terms of organoleptic properties by the Latin-Square design at different stages. Results: After making 22 formulations of caffeine gums, F11 from 20 mg caffeine gums and F22 from 50 mg caffeine gums were chosen as the best formulation in organoleptic properties. Both types of gum released about 90% of their own drug content after 30 min. Drug content of 20 and 50 mg caffeine gum was about 18.2-21.3 mg and 45.7-53.6 mg respectively. Conclusion: In this study, 20 and 50 mg caffeine gums with suitable and desirable properties (i.e., good taste and satisfactory release) were formulated. The best flavor for caffeine gum was cinnamon. Both kinds of 20 and 50 mg gums succeeded in content uniformity test. PMID:24223387

  17. Guar sprinkled on food: effect on glycaemic control, plasma lipids and gut hormones in non-insulin dependent diabetic patients.

    PubMed

    Fuessl, H S; Williams, G; Adrian, T E; Bloom, S R

    1987-01-01

    The effects of guar granules sprinkled over food on carbohydrate and lipid metabolism were studied in a double-blind cross-over trial in 18 patients with non-insulin-dependent diabetes mellitus (mean +/- SEM age 61.3 +/- 2.5 years). Five-gram guar granules (Guarem, Rybar Laboratories, Amersham, Bucks) were sprinkled over food at each main meal for 4 weeks, and during a 4-week placebo period (separated by a 2-week 'wash-out' period), 5 g wheat bran was taken in the same way. Diabetic treatment was not changed during the study. Mean fasting plasma glucose (FPG) concentration and glycosylated haemoglobin (HbA1) concentration after treatment were significantly lower than after the placebo period (FPG 8.29 +/- 0.47 vs 8.78 +/- 0.53 mmol/l, p less than 0.05; HbA1: 8.70 +/- 0.39 vs 9.09 +/- 0.39%, p less than 0.05). There was a 50% reduction in the incremental area under the postprandial glycaemic curve when guar was eaten with a standardized test meal. Total plasma cholesterol decreased from 5.79 +/- 0.29 to 5.19 +/- 0.22 mmol/l (p less than 0.05) after the guar treatment period. Guar ingestion reduced postprandial insulin and enteroglucagon responses, the latter significantly so, but had no apparent effect on gastric inhibitory polypeptide, pancreatic glucagon, gastrin, and pancreatic polypeptide.

  18. Absence of guar efficacy in complex spaghetti meals on postprandial glucose and C-peptide levels in healthy control and non-insulin-dependent diabetes mellitus subjects.

    PubMed

    Sels, J P; De Bruin, H; Camps, M H; Postmes, T J; Menheere, P; Wolfenbuttel, B H; Kruseman, A C

    1992-01-01

    The effects of guar incorporated into a complex spaghetti meal on the glycaemic response in 11 healthy and 6 non-insulin dependent diabetic (NIDDM) subjects was studied. To this end, subjects consumed spaghetti made of either Triticum aestivum or Triticum durum wheat with or without 20 g% guar, as part of a complex meal containing 27% fat, 19% protein and 51% carbohydrate. In both the healthy as well as the NIDDM subjects the incremental integrated postprandial glucose and C-peptide responses after ingestion of a guar spaghetti meal were not different from the values found after a spaghetti meal without guar. In NIDDM subjects the incremental glucose and C-peptide levels were lower at 60 and 90 min and 90 and 150 min respectively after ingestion of guar aestivum spaghetti. Our negative results of effects of guar on postprandial glucose values may be explained by the presence of normal quantities of fat and protein in the meal and imply that addition of dietary fibre to a complex meal is not useful in the dietary management of NIDDM.

  19. Absorption of nutrients is only slightly reduced by supplementing enteral formulas with viscous fiber in miniature pigs.

    PubMed

    Ehrlein, H; Stockmann, A

    1998-12-01

    Viscous polysaccharides reduce intestinal absorption of glucose and diminish postprandial hyperglycemia. However, it is unknown whether viscous fiber also inhibits absorption of nutrients under conditions of enteric feeding. Therefore, we measured the absorption rates of nutrients in miniature pigs by perfusing a 150-cm length of jejunum with 8.37 kJ/min of the three following enteral diets: an isoosmotic oligomeric diet (1670 kJ/L), a hyperosmotic oligomeric diet and an isoosmotic polymeric diet (both 3350 kJ/L). The diets were supplemented with guar gum from 0 to 4.4 g/L. With the three guar-free diets, the mean absorption rate of energy was 5.2 +/- 0.32 kJ/min, corresponding to 62% of the energy infused. Absorption rates of carbohydrate, protein, fat and energy linearly declined as concentrations of guar or the logarithm of chyme viscosity increased. Due to modulations in viscosity, the inhibitory effects of guar were significantly different among the three diets. With the isoosmotic and hyperosmotic oligomeric and the polymeric diets, the addition of 1 g guar/L diminished the absorption of energy by 9.7, 6. 6 and 3.7%, respectively. The strong inhibitory effect on nutrient absorption with the isoosmotic oligomeric diet was caused by an increase in chyme viscosity due to water absorption. With the hyperosmotic oligomeric and the polymeric diets, the chyme viscosity and thus inhibitory effects on absorption were diminished by water secretion and the concomitant infusion of pancreatic enzymes. Results indicate that the addition of small amounts of guar gum to enteral diets of high energy density exerts only small effects on absorption of nutrients.

  20. A review of Explosives Used in Explosive Excavation Research Laboratory Projects Since 1969

    DTIC Science & Technology

    1974-12-01

    Boron compounds Potassium dichramat« Antimony compounds Bismuth compounds P«riodat«s Litharge Guar gum (polysaccSarid«) Storch Acrylomid... gum , and gelled with a cross- linking agent. The i-arliest slurries used Government surplus TNT as a fuel-sensitizer, but the majority o...Nonexplosive TNT PETN RDX Rentalite Composition B Guanidine nitrate Smokeless powder Nitres*: ch Alky’amine nitrates Nit.omannite Aluminum Sugar

  1. Flavour-enhanced cortisol release during gum chewing

    PubMed Central

    Hasegawa, Yoko; Tachibana, Yoshihisa; Ono, Takahiro; Kishimoto, Hiromitsu

    2017-01-01

    There is some evidence to suggest that chewing gum reduces chronic stress. However, it remains controversial how the taste and odour properties of chewing gum influence stress. The present study was designed to investigate this issue in human subjects. Using an enzyme-linked immunosorbent assay, we tested salivary cortisol concentration, which is thought to be a stress marker, in 96 adults who chewed gum with different combinations of taste and odour. Subjects could discriminate between the types of gum without prior information. Salivary cortisol concentrations were highest and lowest for the subjects who chewed the most flavourful gum and the least flavourful gum, respectively. These findings suggest that the salivary cortisol level during gum chewing is not a marker of negative emotions (i.e., stressful conditions) as traditionally considered but, rather, an index of positive emotions that can facilitate biological responses to overcome stressful conditions. PMID:28379983

  2. Flavour-enhanced cortisol release during gum chewing.

    PubMed

    Hasegawa, Yoko; Tachibana, Yoshihisa; Ono, Takahiro; Kishimoto, Hiromitsu

    2017-01-01

    There is some evidence to suggest that chewing gum reduces chronic stress. However, it remains controversial how the taste and odour properties of chewing gum influence stress. The present study was designed to investigate this issue in human subjects. Using an enzyme-linked immunosorbent assay, we tested salivary cortisol concentration, which is thought to be a stress marker, in 96 adults who chewed gum with different combinations of taste and odour. Subjects could discriminate between the types of gum without prior information. Salivary cortisol concentrations were highest and lowest for the subjects who chewed the most flavourful gum and the least flavourful gum, respectively. These findings suggest that the salivary cortisol level during gum chewing is not a marker of negative emotions (i.e., stressful conditions) as traditionally considered but, rather, an index of positive emotions that can facilitate biological responses to overcome stressful conditions.

  3. 21 CFR 582.7351 - Gum tragacanth.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Gum tragacanth. 582.7351 Section 582.7351 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7351 Gum tragacanth. (a) Product. Tragacanth (gum tragacanth). (b) Conditions of use. This substance is generally...

  4. 21 CFR 582.7351 - Gum tragacanth.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Gum tragacanth. 582.7351 Section 582.7351 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7351 Gum tragacanth. (a) Product. Tragacanth (gum tragacanth). (b) Conditions of use. This substance is generally...

  5. 21 CFR 582.7351 - Gum tragacanth.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Gum tragacanth. 582.7351 Section 582.7351 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7351 Gum tragacanth. (a) Product. Tragacanth (gum tragacanth). (b) Conditions of use. This substance is generally...

  6. Development of fish-based model systems with various microstructures.

    PubMed

    Verheyen, Davy; Baka, Maria; Glorieux, Seline; Duquenne, Barbara; Fraeye, Ilse; Skåra, Torstein; Van Impe, Jan F

    2018-04-01

    The effectiveness of predictive microbiology is limited by the lack of knowledge concerning the influence of food microstructure on microbial dynamics. Therefore, future modelling attempts should be based on experiments in structured food model systems as well as liquid systems. In this study, fish-based model systems with various microstructures were developed, i.e., two liquid systems (with and without xanthan gum), an emulsion, an aqueous gel, and a gelled emulsion. The microstructural effect was isolated by minimising compositional and physico-chemical changes among the different model systems. The systems were suitable for common growth and mild thermal inactivation experiments involving both homogeneous and surface inoculation. Average pH of the model systems was 6.36±0.03 and average a w was 0.988±0.002. The liquid system without xanthan gum behaved like a Newtonian fluid, while the emulsion and the liquid containing xanthan gum exhibited (non-Newtonian) pseudo-plastic behaviour. Both the aqueous gel and gelled emulsion were classified as strong gels, with a hardness of 1.35±0.07N and 1.25±0.05N, respectively. Fat droplet size of the emulsion and gelled emulsion model systems was evenly distributed around 1μm. In general, the set of model systems was proven to be suitable to study the influence of important aspects of food microstructure on microbial dynamics. Copyright © 2017. Published by Elsevier Ltd.

  7. Effects of soy-soluble fiber and flaxseed gum on the glycemic and insulinemic responses to glucose solutions and dairy products in healthy adult males.

    PubMed

    Au, Marco M C; Goff, H Douglas; Kisch, Julie A; Coulson, Alex; Wright, Amanda J

    2013-01-01

    Soy-soluble polysaccharides and flaxseed gum are underutilized dietary fibers of interest to the food industry. However, because the ability of soluble fibers to modulate postprandial glucose and insulin metabolism has been related to their viscous effects, the utility of these and other low-viscosity soluble fibers remains unproven. The objective of this study was to examine the associations between soy-soluble polysaccharides and flaxseed gum concentration, product viscosity, and the postprandial glycemic and insulinemic responses in the context of glucose solutions as well as fluid and gelled dairy products. Twelve healthy males participated in a randomized crossover postprandial study in which they visited the laboratory following overnight fasts on 11 occasions to consume one of 11 study treatments, each consisting of 50 g available carbohydrates. The study treatments included a glucose reference (in duplicate), glucose solutions containing soy-soluble polysaccharides (6%), flaxseed gum (0.7%), or guar gum (0.23%), all matched for an apparent viscosity of 61 mPa·s at 50 s⁻¹, as well as dairy-based beverages and puddings with 0% or 1% soluble fiber added. Blood samples were collected at fasting and up to 2 hours postprandially for determination of glucose and insulin concentrations. Area under the curve (AUC), peak concentration, and time-to-peak values as well as glycemic index (GI) and insulinemic index (II) were calculated. Fiber fortification of a 50 g glucose solution had no effect on postprandial blood glucose or insulin levels, even at a high concentration (i.e., 6% soy-soluble polysaccharides). Glucose AUC and GI values for the dairy-based beverage (p < 0.05) and pudding (p < 0.01) controls were significantly lower than the glucose reference. Glucose AUC and GI values for the soy-soluble polysaccharide-fortified dairy products (p < 0.01) and flaxseed gum-fortified dairy products (p < 0.001) were significantly lower than the glucose reference. No

  8. 21 CFR 582.3336 - Gum guaiac.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Gum guaiac. 582.3336 Section 582.3336 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... Gum guaiac. (a) Product. Gum guaiac. (b) Tolerance. 0.1 percent (equivalent antioxidant activity 0.01...

  9. 21 CFR 582.3336 - Gum guaiac.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Gum guaiac. 582.3336 Section 582.3336 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... Gum guaiac. (a) Product. Gum guaiac. (b) Tolerance. 0.1 percent (equivalent antioxidant activity 0.01...

  10. 21 CFR 582.3336 - Gum guaiac.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Gum guaiac. 582.3336 Section 582.3336 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... Gum guaiac. (a) Product. Gum guaiac. (b) Tolerance. 0.1 percent (equivalent antioxidant activity 0.01...

  11. 21 CFR 582.3336 - Gum guaiac.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Gum guaiac. 582.3336 Section 582.3336 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS... Gum guaiac. (a) Product. Gum guaiac. (b) Tolerance. 0.1 percent (equivalent antioxidant activity 0.01...

  12. 21 CFR 582.7330 - Gum arabic.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Gum arabic. 582.7330 Section 582.7330 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7330 Gum arabic. (a) Product. Acacia (gum arabic). (b) Conditions of use. This substance is generally recognized as...

  13. 21 CFR 582.7330 - Gum arabic.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Gum arabic. 582.7330 Section 582.7330 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7330 Gum arabic. (a) Product. Acacia (gum arabic). (b) Conditions of use. This substance is generally recognized as...

  14. 21 CFR 582.7330 - Gum arabic.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Gum arabic. 582.7330 Section 582.7330 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7330 Gum arabic. (a) Product. Acacia (gum arabic). (b) Conditions of use. This substance is generally recognized as...

  15. Gymnema

    MedlinePlus

    ... combination of gymnema, hydroxycitric acid, and niacin-bound chromium by mouth can reduce body weight in people ... these products include alpha-lipoic acid, bitter melon, chromium, devil's claw, fenugreek, garlic, guar gum, horse chestnut, ...

  16. 21 CFR 582.7333 - Gum ghatti.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Gum ghatti. 582.7333 Section 582.7333 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7333 Gum ghatti. (a) Product. Gum ghatti. (b) Conditions of use. This substance is generally recognized as safe when...

  17. 21 CFR 582.7333 - Gum ghatti.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Gum ghatti. 582.7333 Section 582.7333 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7333 Gum ghatti. (a) Product. Gum ghatti. (b) Conditions of use. This substance is generally recognized as safe when...

  18. 21 CFR 582.7333 - Gum ghatti.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 6 2014-04-01 2014-04-01 false Gum ghatti. 582.7333 Section 582.7333 Food and..., FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Stabilizers § 582.7333 Gum ghatti. (a) Product. Gum ghatti. (b) Conditions of use. This substance is generally recognized as safe when...

  19. Assessment of physical and structural characteristics of almond gum.

    PubMed

    Bashir, Mudasir; Haripriya, Sundaramoorthy

    2016-12-01

    Almond gum was investigated for its physical and structural characteristics in comparison to gum arabic. Among physical properties, bulk density was found to be 0.600±0.12g/mL and 0.502±0.20g/mL for almond and gum arabic respectively. Almond gum (0.820±0.13g/mL) displayed the maximum value for tapped density. Compressibility index of exudate gum powders varied from 26.79±1.47 to 37.46±0.50% and follow the order gum arabic>almond gum. Almond gum demonstrated good flow characteristics when compared to gum arabic. True density showed significant difference (p<0.05) among the exudate samples and it was recorded higher for gum arabic. The maximum value of porosity recorded in case of gum arabic indicates the presence of large number of interstitial spaces among its particles. Almond gum had fair flow character while good for the other exudate gum powder. Almond gum had relatively higher mineral content than gum arabic. The oil holding capacity of exudate gums varied from 0.87±0.05 to 0.92±0.02g/g. Exudate powder samples were found to lie in the first quadrant of the hue angle (0-90°) corresponding to the range of reddish-purple to yellow. The absence of peaks in the X-ray diffractograms of exudate samples reflects their amorphous nature. SEM micrographs revealed a lot of variability in shape and size of the exudate particles. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. 21 CFR 184.1351 - Gum tragacanth.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 3 2013-04-01 2013-04-01 false Gum tragacanth. 184.1351 Section 184.1351 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Substances Affirmed as GRAS § 184.1351 Gum tragacanth. (a) Gum tragacanth is the exudate from one of several...

  1. 21 CFR 184.1351 - Gum tragacanth.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 3 2012-04-01 2012-04-01 false Gum tragacanth. 184.1351 Section 184.1351 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Substances Affirmed as GRAS § 184.1351 Gum tragacanth. (a) Gum tragacanth is the exudate from one of several...

  2. Xanthan/chitosan gold chip for metal enhanced protein biomarker detection.

    PubMed

    Domnanich, Patrick; Peña, Dacimoneida Brito; Preininger, Claudia

    2011-01-15

    Protein microarrays for disease diagnostics are required to accurately quantify analytes in the low pg/mL range. This task is hampered by weak signal strengths and too low detector sensitivity. Herein we present reflective gold chips coated with polyelectrolyte multilayers (PEMs) for signal enhancement in immunoassays for melanoma-relevant biomarkers. Among tested (semi)natural polysaccharides (xanthan, chitosan, carboxymethylcellulose, hyaluronic acid) PEMs composed of xanthan and chitosan performed best in terms of detection of low analyte concentrations (ED10), spot morphology, fluorescence background and variability (<10%). Fluorescence signals on gold slides with a 75 nm coating of seven crosslinked polyelectrolyte double layers were up to 50 times higher than on bare glass slides. In comparison to commercial substrates the signal to noise ratio is enhanced by up to factor 11. Furthermore sandwich assays for interleukins 6, 8, 10, tumour necrosis factor alpha (TNFα), vascular endothelial growth factor A (VEGF-A) and S100B show working ranges which cover significantly lower concentrations (up to 38-fold). Not limited to above assays the presented substrates, which combine a biocompatible interface with metal-based signal amplification, are a valuable tool in a variety of biosensor applications. Copyright © 2010 Elsevier B.V. All rights reserved.

  3. Manual: Modern Gum Naval Stores Methods

    Treesearch

    Ralph W. Clements

    1974-01-01

    Modern gum naval stores methods have been developed to benefit both the gum producer and the timber owner. Following the methods described in this booklet will bring maximum gum yields, whill reduce chipping-labor requirements about 50 percent, and will make the worked-out tree saleable for other wood products. If these modern turpentining mehods are used, naval...

  4. Effect of natural flocculants on purity and properties of β-glucan extracted from barley and oat.

    PubMed

    Kurek, Marcin Andrzej; Karp, Sabina; Stelmasiak, Adrian; Pieczykolan, Ewelina; Juszczyk, Karolina; Rieder, Anne

    2018-05-15

    In this study, β-glucan was extracted from wholegrain oat and barley flours by a novel extraction and purification method employing natural flocculants (chitosan, guar gum and gelatin). The use of flocculants decreased the total amount of extracted gum, which was highest in control samples (9.07 and 7.9% for oat and barley, respectively). The β-glucan specific yield, however, increased with the use of chitosan and guar gum, which were able to remove protein and ash impurities resulting in gums with a higher purity.The highest concentration of chitosan (0.6 %) resulted in gums with the highest β-glucan content (82.0 ± 0.23 and 79.0 ± 0.19 for barley and oat, respectively) and highest β-glucan specific yield (96.9 and 93.3 % for oat and barley, respectively). Explanation is in R&D section. The use of gelatin was not successful. All gum samples had a high content of total dietary fiber (>74%) and a high water holding capacity (4.6-7.4 g/g), but differed in apparent viscosity, which was highest for the oat sample extracted with 0.6% chitosan. This sample also showed the highest β-glucan molecular weight among the oat samples, which were in general 10-fold higher than for the barley samples. Among the barley samples, β-glucan molecular weight was highest for the control. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Effect of Different Gums on Rheological Properties of Slurry

    NASA Astrophysics Data System (ADS)

    Weikey, Yogita; Sinha, S. L.; Dewangan, S. K.

    2018-02-01

    This paper presents the effect of different natural gums on water-bentonite slurry, which is used as based fluid in water based drilling fluid. The gums used are Babul gum (Acacia nilotica), Dhawda gum (Anogeissus latifolia), Katira gum (Cochlospermum religiosum) and Semal gum (Bombax ceiba). For present investigation, samples have been prepared by varying concentration of gums. The variation of shear stress and shear rate has been plotted and on the basis of this behaviour of fluids has been explained. The value of k and n are calculated by using Power law. R 2 values are also calculated to support the choice of gum selection.

  6. Fermentation of mucin and plant polysaccharides by strains of Bacteroides from the human colon.

    PubMed Central

    Salyers, A A; Vercellotti, J R; West, S E; Wilkins, T D

    1977-01-01

    Ten Bacteroides species found in the human colon were surveyed for their ability to ferment mucins and plant polysaccharides ("dietary fiber"). A number of strains fermented mucopolysaccharides (heparin, hyaluronate, and chondroitin sulfate) and ovomucoid. Only 3 of the 188 strains tested fermented beef submaxillary mucin, and none fermented porcine gastric mucin. Many of the Bacteroides strains tested were also able to ferment a variety of plant polysaccharides, including amylose, dextran, pectin, gum tragacanth, gum guar, larch arabinogalactan, alginate, and laminarin. Some plant polysaccharides such as gum arabic, gum karaya, gum ghatti and fucoidan, were not utilized by any of the strains tested. The ability to utilize mucins and plant polysaccharides varied considerably among the Bacteroides species tested. PMID:848954

  7. Gum Producers Can Improve Quality Of Gum Marketed and Get Higher Prices

    Treesearch

    Ralph W. Clements

    1979-01-01

    Acid waste from over-treatment and old, wornout iron cups have contributed significantly to the generally poor quality of gum marketed. Today producers are reluctant to purchase new cups and gutters and invest up to $1.80 per tree for production when the market price for gum averages 14.54 per pound annually. Guidelines are given for improving the quality by...

  8. 21 CFR 184.1339 - Guar gum.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... the following conditions: Maximum Usage Levels Permitted Food (as served) Percent Function Baked goods and baking mixes, § 170.3(n)(1) of this chapter 0.35 Emulsifier and emulsifier salts, § 170.3(o)(8) of...

  9. Flavor-Enhanced Modulation of Cerebral Blood Flow during Gum Chewing.

    PubMed

    Hasegawa, Yoko; Tachibana, Yoshihisa; Sakagami, Joe; Zhang, Min; Urade, Masahiro; Ono, Takahiro

    2013-01-01

    Flavor perception, the integration of taste and odor, is a critical factor in eating behavior. It remains unclear how such sensory signals influence the human brain systems that execute the eating behavior. WE TESTED CEREBRAL BLOOD FLOW (CBF) IN THE FRONTAL LOBES BILATERALLY WHILE SUBJECTS CHEWED THREE TYPES OF GUM WITH DIFFERENT COMBINATIONS OF TASTE AND ODOR: no taste/no odor gum (C-gum), sweet taste/no odor gum (T-gum), and sweet taste/lemon odor gum (TO-gum). Simultaneous recordings of transcranial Doppler ultrasound (TCD) and near infrared spectrometer (NIRS) were used to measure CBF during gum chewing in 25 healthy volunteers. Bilateral masseter muscle activity was also monitored. We found that subjects could discriminate the type of gum without prior information. Subjects rated the TO-gum as the most flavorful gum and the C-gum as the least flavorful. Analysis of masseter muscle activity indicated that masticatory motor output during gum chewing was not affected by taste and odor. The TCD/NIRS measurements revealed significantly higher hemodynamic signals when subjects chewed the TO-gum compared to when they chewed the C-gum and T-gum. These data suggest that taste and odor can influence brain activation during chewing in sensory, cognitive, and motivational processes rather than in motor control.

  10. Medicated chewing gum, a novel drug delivery system

    PubMed Central

    Aslani, Abolfazl; Rostami, Farnaz

    2015-01-01

    New formulations and technologies have been developed through oral drug delivery systems’ researches. Such researches display significance of oral route amongst patients. We’ve reviewed all the features associated with medicated chewing gum as a modern drug delivery by introducing the history, advantages and disadvantages, methods of manufacturing, composition differences, evaluation tests and examples of varieties of medicated chewing gums. Acceptance of medicated chewing gum has been augmented through years. The advantages and therapeutic benefits of chewing gum support its development as we can see new formulations with new drugs contained have been produced from past and are going to find a place in market by formulation of new medicated chewing gums. Potential applications of medicated chewing gums are highly widespread as they will be recognized in future. Nowadays standards for qualifying chewing gums are the same as tablets. Patient-centered studies include medicated chewing gums as a delivery system too which creates compliance for patients. PMID:26109999

  11. Biochemical and technological studies on the production of isolated guar protein.

    PubMed

    Khalil, M M

    2001-02-01

    Guar seeds contain 32% crude protein. Therefore, attempts were made to prepare protein isolates from guar seed flour (GSF) by extraction in different media (distilled water, salt solution, alkali solution alone or in combination) followed by a precipitation at acid pH. From the four technologies adopted, mixed salt-alkali solution was found to be the most satisfactory for extraction of protein from GSF. The highest amount of product was obtained in the mixed technology along with the highest amount of protein (87.5%). Protein isolates were also nutritionally evaluated following well-established rat bioassay procedures in a comparative study with casein as standard. The protein isolates are rich in lysine but poor in sulphur-containing amino acids such as methionine and cysteine. Protein isolates obtained by mixed salt-alkali solution showed high water and oil absorption as well as good emulsifying and foaming stability. The results indicate that protein isolates can be used as a supplementary source of protein in different food industries.

  12. Flavor-Enhanced Modulation of Cerebral Blood Flow during Gum Chewing

    PubMed Central

    Hasegawa, Yoko; Tachibana, Yoshihisa; Sakagami, Joe; Zhang, Min; Urade, Masahiro; Ono, Takahiro

    2013-01-01

    Background Flavor perception, the integration of taste and odor, is a critical factor in eating behavior. It remains unclear how such sensory signals influence the human brain systems that execute the eating behavior. Methods We tested cerebral blood flow (CBF) in the frontal lobes bilaterally while subjects chewed three types of gum with different combinations of taste and odor: no taste/no odor gum (C-gum), sweet taste/no odor gum (T-gum), and sweet taste/lemon odor gum (TO-gum). Simultaneous recordings of transcranial Doppler ultrasound (TCD) and near infrared spectrometer (NIRS) were used to measure CBF during gum chewing in 25 healthy volunteers. Bilateral masseter muscle activity was also monitored. Results We found that subjects could discriminate the type of gum without prior information. Subjects rated the TO-gum as the most flavorful gum and the C-gum as the least flavorful. Analysis of masseter muscle activity indicated that masticatory motor output during gum chewing was not affected by taste and odor. The TCD/NIRS measurements revealed significantly higher hemodynamic signals when subjects chewed the TO-gum compared to when they chewed the C-gum and T-gum. Conclusions These data suggest that taste and odor can influence brain activation during chewing in sensory, cognitive, and motivational processes rather than in motor control. PMID:23840440

  13. 7 CFR 160.7 - Gum spirits of turpentine.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 3 2014-01-01 2014-01-01 false Gum spirits of turpentine. 160.7 Section 160.7... STANDARDS FOR NAVAL STORES General § 160.7 Gum spirits of turpentine. The designation “gum spirits of turpentine” shall refer to the kind of spirits of turpentine obtained by distillation of the oleoresin (gum...

  14. 7 CFR 160.7 - Gum spirits of turpentine.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 3 2011-01-01 2011-01-01 false Gum spirits of turpentine. 160.7 Section 160.7... STANDARDS FOR NAVAL STORES General § 160.7 Gum spirits of turpentine. The designation “gum spirits of turpentine” shall refer to the kind of spirits of turpentine obtained by distillation of the oleoresin (gum...

  15. 7 CFR 160.7 - Gum spirits of turpentine.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 3 2012-01-01 2012-01-01 false Gum spirits of turpentine. 160.7 Section 160.7... STANDARDS FOR NAVAL STORES General § 160.7 Gum spirits of turpentine. The designation “gum spirits of turpentine” shall refer to the kind of spirits of turpentine obtained by distillation of the oleoresin (gum...

  16. 7 CFR 160.7 - Gum spirits of turpentine.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Gum spirits of turpentine. 160.7 Section 160.7... STANDARDS FOR NAVAL STORES General § 160.7 Gum spirits of turpentine. The designation “gum spirits of turpentine” shall refer to the kind of spirits of turpentine obtained by distillation of the oleoresin (gum...

  17. 7 CFR 160.7 - Gum spirits of turpentine.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Gum spirits of turpentine. 160.7 Section 160.7... STANDARDS FOR NAVAL STORES General § 160.7 Gum spirits of turpentine. The designation “gum spirits of turpentine” shall refer to the kind of spirits of turpentine obtained by distillation of the oleoresin (gum...

  18. Liamocins, sophorolipids, and frost grape polysaccharides. New carbohydrate research from the USDA’s NCAUR national laboratory

    USDA-ARS?s Scientific Manuscript database

    The USDA’s National Center for Agricultural Utilization Research has a prominent history in carbohydrate research, including the development of xanthan gum, ‘super slurper’ polysaccharides, beta-dextrans, alternan, and beta lactamase antibiotics (penicillins), as well as analytical tools such as ald...

  19. Quantification and Qualification of Bacteria Trapped in Chewed Gum

    PubMed Central

    Wessel, Stefan W.; van der Mei, Henny C.; Morando, David; Slomp, Anje M.; van de Belt-Gritter, Betsy; Maitra, Amarnath; Busscher, Henk J.

    2015-01-01

    Chewing of gum contributes to the maintenance of oral health. Many oral diseases, including caries and periodontal disease, are caused by bacteria. However, it is unknown whether chewing of gum can remove bacteria from the oral cavity. Here, we hypothesize that chewing of gum can trap bacteria and remove them from the oral cavity. To test this hypothesis, we developed two methods to quantify numbers of bacteria trapped in chewed gum. In the first method, known numbers of bacteria were finger-chewed into gum and chewed gums were molded to standard dimensions, sonicated and plated to determine numbers of colony-forming-units incorporated, yielding calibration curves of colony-forming-units retrieved versus finger-chewed in. In a second method, calibration curves were created by finger-chewing known numbers of bacteria into gum and subsequently dissolving the gum in a mixture of chloroform and tris-ethylenediaminetetraacetic-acid (TE)-buffer. The TE-buffer was analyzed using quantitative Polymerase-Chain-Reaction (qPCR), yielding calibration curves of total numbers of bacteria versus finger-chewed in. Next, five volunteers were requested to chew gum up to 10 min after which numbers of colony-forming-units and total numbers of bacteria trapped in chewed gum were determined using the above methods. The qPCR method, involving both dead and live bacteria yielded higher numbers of retrieved bacteria than plating, involving only viable bacteria. Numbers of trapped bacteria were maximal during initial chewing after which a slow decrease over time up to 10 min was observed. Around 108 bacteria were detected per gum piece depending on the method and gum considered. The number of species trapped in chewed gum increased with chewing time. Trapped bacteria were clearly visualized in chewed gum using scanning-electron-microscopy. Summarizing, using novel methods to quantify and qualify oral bacteria trapped in chewed gum, the hypothesis is confirmed that chewing of gum can trap

  20. What do GUM physicians think should be taught in a modern undergraduate GUM module? A qualitative inquiry.

    PubMed

    Fernando, I

    2015-10-01

    Traditional undergraduate Genitourinary Medicine (GUM) teaching in the UK concentrated on the management of individual sexually transmitted infections. There is significant variation, however, in the GUM teaching provided by different medical schools today. I undertook a qualitative interview study to gather views of GUM and other sexual health clinicians regarding what should be taught within a modern undergraduate GUM module. Nine GUM clinicians and two Sexual and Reproductive Health (SRH) clinicians participated in the study; all were directly involved in undergraduate teaching. Semi-structured interviews were conducted with study participants by a single interviewer, focusing on three key topics: their individual opinions regarding important learning outcomes (LOs) for a modern model GUM curriculum, their preferred teaching methods and the total recommended teaching time required. Interviews were audio-recorded with consent and professionally transcribed. Data were analysed by the content analysis method. Interviewees frequently stressed skill and attitudinal LOs, even above knowledge. Recommended important skills included sexual history taking, HIV risk assessment and testing, and male and female genital examination. Recommended attitudinal LOs were developing an open and non-judgemental approach to sexual health issues and understanding sexual well-being to be an important component of general health. Respondents were keen for a mixture of teaching methods, but generally agreed that clinic attendance and experiential learning were beneficial. They preferred that GUM teaching should be delivered in the latter years of the undergraduate curriculum. © The Author(s) 2015.