The seduction of models. Chinampa agriculture in Mexico.

PubMed

Chapin, M

1988-01-01

Considerable excitement accompanied Mexico's plan in the mid-1970s to build "Chinampas," in the swampy region of Veracruz and Tabasco, that is, agriculture involving the construction of raised farming beds in shallow lakes or marshes. The plan was devised by Mexico's Instituto Nacional de Investigaciones sobre los Recursos Bioticos (INIREB). Perfected by the inhabitants of the Valley of Mexico before the Spanish Conquest, chinampas had nearly vanished except in a few isolated and shrinking areas around Mexico City. The chinampas have been steadily constricted in recent years as Mexico City has extended out and swallowed the best known of them, Xochimilco. The introduction of chinampa technology in Tucta, a Chontal village of approximately 300 families in 1978, began on a grand scale. The INI's objectives for the project were: to provide the landless Chontale Indians with permanent employment; to bring about self-sufficient food production in the area; to ensure a constant production of vegetables for the internal market of Villahermosa; to strengthen indigenous cultural identity; and to develop a real alternative for the incorporation of swampland into productive activities. In 1979, INIREB became involved in a 2nd chinampa project in the "ejido" of El Castillo, Veracruz. El Castillo was selected as an experimental project site because of the lake as well as the village's proximity to INIREB's central office in Xalapa, rather than community interest in chinampas. The examples of chinampa technology transfer presented had different outcomes, but they shared several crucial defects. In both cases, the stated and unstated objectives of project managers had little fit with the interests and needs of the farmers. The 2 projects were designed and implemented by outside technicians without significant local participation, and both rapidly fell apart when "beneficiaries" failed to cooperate. The Chontal case is notable because, after a series of failures, it finally worked

Complete Genome Sequence of Paenibacillus larvae MEX14, Isolated from Honey Bee Larvae from the Xochimilco Quarter in Mexico City

PubMed Central

Peréz de la Rosa, D.; Pérez de la Rosa, J. J.; Cossio-Bayugar, R.; Miranda-Miranda, E.; Lozano, L.; Bravo-Díaz, M. A.; Rocha-Martínez, M. K.

2015-01-01

Paenibacillus larvae strain MEX14 is a facultative anaerobic endospore-forming bacterium that infects Apis mellifera larvae. Strain MEX14 was isolated from domestic bee larvae collected in a backyard in Mexico City. The estimated genome size was determined to be 4.18 Mb, and it harbors 4,806 protein coding genes (CDSs). PMID:26316636

Complete Genome Sequence of Paenibacillus larvae MEX14, Isolated from Honey Bee Larvae from the Xochimilco Quarter in Mexico City.

PubMed

Peréz de la Rosa, D; Pérez de la Rosa, J J; Cossio-Bayugar, R; Miranda-Miranda, E; Lozano, L; Bravo-Díaz, M A; Rocha-Martínez, M K; Sachman-Ruiz, B

2015-08-27

Paenibacillus larvae strain MEX14 is a facultative anaerobic endospore-forming bacterium that infects Apis mellifera larvae. Strain MEX14 was isolated from domestic bee larvae collected in a backyard in Mexico City. The estimated genome size was determined to be 4.18 Mb, and it harbors 4,806 protein coding genes (CDSs). Copyright © 2015 Peréz de la Rosa et al.

S2PLOT: Three-dimensional (3D) Plotting Library

NASA Astrophysics Data System (ADS)

Barnes, D. G.; Fluke, C. J.; Bourke, P. D.; Parry, O. T.

2011-03-01

We present a new, three-dimensional (3D) plotting library with advanced features, and support for standard and enhanced display devices. The library - S2PLOT - is written in C and can be used by C, C++ and FORTRAN programs on GNU/Linux and Apple/OSX systems. S2PLOT draws objects in a 3D (x,y,z) Cartesian space and the user interactively controls how this space is rendered at run time. With a PGPLOT inspired interface, S2PLOT provides astronomers with elegant techniques for displaying and exploring 3D data sets directly from their program code, and the potential to use stereoscopic and dome display devices. The S2PLOT architecture supports dynamic geometry and can be used to plot time-evolving data sets, such as might be produced by simulation codes. In this paper, we introduce S2PLOT to the astronomical community, describe its potential applications, and present some example uses of the library.

Effect of lixiviated sediments affected with treated water on Selenastrum capricornutum, Printz and Origanum vulgare L.

PubMed

Ramos, Guadalupe E; Lopez, Martin H; Flores, Antonio M; Figueroa, Guadalupe T; De Leon, Fernando G

2010-01-01

Xochimilco is an area of Mexico City fulfilling important ecological functions. However, the water of the canal network in the lacustrine zone of Xochimilco is supplied by the water treatment plants of the city, implying a risk of accumulated contaminants in the sediments. This study reports the effect of lixiviates obtained from sediments collected in the canals of Xochimilco on the growth of the alga Selenastrum capricornutum and the angiosperm Origanum vulgare. Three factors were tested: (a) water source in terms of the effluent from the two water treatment plants (urban waste-water, located at Cerro de la Estrella (CE) and urban-rural waters at San Luis Tlaxialtemalco (SLT); (b) sampling season (January, dry season; May and September, rainy season; and (c) distances from the water discharge point in the Xochimilco's main canal (5200 and 1000 m for CE, and 0, 200 m for SLT). The chemical water properties analyzed were: pH, electrical conductivity, N-NO(3), N-NH(3), N(Total), P-PO(4) and P(Total). The alga was more sensitive to the contaminants than O. vulgare, showing growth inhibition of 93-100%. The effect of sampling season on the inhibition of algal growth was ordered as follows: September > May > January. Lixiviates obtained from sediment samples 200 and 1000 m from the main point of water discharge caused a higher algal growth inhibition than the samples obtained at the source point. Lixiviate promoted the growth of seedlings of O. vulgare.

Aquifer test interpretation using derivative analysis and diagnostic plots

NASA Astrophysics Data System (ADS)

Hernández-Espriú, Antonio; Real-Rangel, Roberto; Cortés-Salazar, Iván; Castro-Herrera, Israel; Luna-Izazaga, Gabriela; Sánchez-León, Emilio

2017-04-01

Pumping tests remain a method of choice to deduce fundamental aquifer properties and to assess well condition. In the oil and gas (O&G) industry, well testing has been the core technique in examining reservoir behavior over the last 50 years. The pressure derivative by Bourdet, it is perhaps, the most significant single development in the history of well test analysis. Recently, the so-called diagnostics plots (e.g. drawdown and drawdown derivative in a log-log plot) have been successfully tested in aquifers. However, this procedure is still underutilized by groundwater professionals. This research illustrates the applicability range, advantages and drawbacks (e.g. smoothing procedures) of diagnostic plots using field examples from a wide spectrum of tests (short/long tests, constant/variable flow rates, drawdown/buildup stages, pumping well/observation well) in dissimilar geological conditions. We analyze new and pre-existent aquifer tests in Mexico, USA, Canada, Germany, France and Saudi Arabia. In constant flow rate tests, our results show that derivative analysis is an easy, robust and powerful tool to assess near-borehole damage effects, formation heterogeneity, boundaries, flow regimes, infinite-acting radial stages, i.e., valid Theisian framework, and fracture-driven flow. In step tests, the effectiveness relies on high-frequency drawdown measurements. Moreover, we adapt O&G analytical solutions to cater for the conditions in groundwater systems. In this context, further parameters can be computed analytically from the plots, such as skin factor, head losses, wellbore storage, distance to the boundary, channel-aquifer and/or fracture zone width, among others. Therefore, diagnostic plots should be considered a mandatory tool for pumping tests analysis among hydrogeologists. This project has been supported by DGAPA (UNAM) under the research project PAPIIT IN-112815.

Faster simulation plots

NASA Technical Reports Server (NTRS)

Fowell, Richard A.

1989-01-01

Most simulation plots are heavily oversampled. Ignoring unnecessary data points dramatically reduces plot time with imperceptible effect on quality. The technique is suited to most plot devices. The departments laser printer's speed was tripled for large simulation plots by data thinning. This reduced printer delays without the expense of a faster laser printer. Surpisingly, it saved computer time as well. All plot data are now thinned, including PostScript and terminal plots. The problem, solution, and conclusions are described. The thinning algorithm is described and performance studies are presented. To obtain FORTRAN 77 or C source listings, mail a SASE to the author.

[Harassment experiences among students of health-related professional careers in Mexico].

PubMed

Ortiz-Hernández, Luis; Compeán-Dardón, María Sandra; Gallardo-Hernández, Georgina; Támez-González, Silvia; Pérez-Salgado, Diana; Verde-Flota, Elizabeth

2010-01-01

This study focuses on the frequency with which students of health-related professional careers have perceived themselves as victims of sexual harassment, how this has occurred, and the characteristics of those students associated with that experience. Cross-sectional descriptive study, with a sample of 530 students from health-related schools at the Universidad Autónoma Metropolitana Xochimilco in Mexico City. Statistical analysis was stratified by sex, age, race, perception of physical attractiveness, transgression of gender stereotypes, and sexual orientation. Experiences of sexual harassment were assessed based on a scale of 19 questions. Five components were identified by factor analysis: verbal and/or physical harassment by inadequate staring/glancing, inadequate proposals, and comments. In general, women were more harassed by inadequate staring/glancing; those who perceived themselves as being more physically attractive were more verbally harassed, whereas those who transgressed gender stereotypes were more exposed to physical harassment and harrassing glances as compared to men who were seen themselves as being less attractive and who did not transgressed the gender stereotype. Sexual harassment is an existing situation occurring among students. It is necessary to detect and recognize the forms of presentation of gender inequalities to avoid imposing sanctions on conducts that are not adhered to gender stereotypes.

Improved NASTRAN plotting

NASA Technical Reports Server (NTRS)

Chan, Gordon C.

1991-01-01

The new 1991 COSMIC/NASTRAN version, compatible with the older versions, tries to remove some old constraints and make it easier to extract information from the plot file. It also includes some useful improvements and new enhancements. New features available in the 1991 version are described. They include a new PLT1 tape with simplified ASCII plot commands and short records, combined hidden and shrunk plot, an x-y-z coordinate system on all structural plots, element offset plot, improved character size control, improved FIND and NOFIND logic, a new NASPLOT post-prosessor to perform screen plotting or generate PostScript files, and a BASIC/NASTPLOT program for PC.

Restoring sand shinnery oak prairies with herbicide and grazing in New Mexico

USGS Publications Warehouse

Zavaleta, Jennifer C.; Haukos, David A.; Grisham, Blake A.; Boal, Clint W.; Dixon, Charles

2016-01-01

Sand shinnery oak (Quercus havardii) prairies are increasingly disappearing and increasingly degraded in the Southern High Plains of Texas and New Mexico. Restoring and managing sand shinnery oak prairie can support biodiversity, specific species of conservation concern, and livestock production. We measured vegetation response to four treatment combinations of herbicide (tebuthiuron applied at 0.60 kg/ha) and moderate-intensity grazing (50% removal of annual herbaceous production) over a 10-year period in a sand shinnery oak prairie of eastern New Mexico. We compared the annual vegetation response to the historical climax plant community (HCPC) as outlined by the U.S. Department of Agriculture Ecological Site Description. From 2 to 10 years postapplication, tebuthiuron-treated plots had reduced shrub cover with twice as much forb and grass cover as untreated plots. Tebuthiuron-treated plots, regardless of the presence of grazing, most frequently met HCPC. Tebuthiuron and moderate-intensity grazing increased vegetation heterogeneity and, based on comparison of the HCPC, successfully restored sand shinnery oak prairie to a vegetation composition similar to presettlement.

Product plots.

PubMed

Wickham, Hadley; Hofmann, Heike

2011-12-01

We propose a new framework for visualising tables of counts, proportions and probabilities. We call our framework product plots, alluding to the computation of area as a product of height and width, and the statistical concept of generating a joint distribution from the product of conditional and marginal distributions. The framework, with extensions, is sufficient to encompass over 20 visualisations previously described in fields of statistical graphics and infovis, including bar charts, mosaic plots, treemaps, equal area plots and fluctuation diagrams. © 2011 IEEE

Fancy plots for SIG

DOE Office of Scientific and Technical Information (OSTI.GOV)

Norris, J.; Daniels, B.

1986-02-01

The fancy plot package is a group of five programs which allow the user to make 2- and 3-dimensional document quality plots from the SIG data base. The fancyplot package was developed using a DEC VT100 terminal fitted with a Digital Engineering Retrographics board and the QMS Laserprinter. If a terminal emulates the VT100/Retrographic terminal the package should work. A Pericom terminal for example, works perfectly. The fancy plot package is available to provide report-ready plots without resorting to cutting and pasting. This package is contained in programs FFP, TFP, TDFD, 3DFFP and 3DTFP in directory ERD131::USER2 DISK:(HUDSON.SIG). These programsmore » may be summarized as follows: FFP - 2-Dimensional Frequency Fancy Plots with magnitude/phase option; TFP - 2-Dimensional Time Fancy Plots; TDFD - 2-Dimensional Time Domain Frequency Domain Plots; and 3DFFP - equally spaced 3-Dimensional Frequency Fancy Plots; 3DTFP - equally spaced 3-Dimensional Time Plots. 8 figs.« less

New Mexico Forest Inventory and Analysis: American Recovery and Reinvestment Act Project, Field Report: 2010-2012

Treesearch

Mary Stuever; John Capuano

2014-01-01

For a 3-year period, from 2010-2012, the New Mexico Forestry Division utilized contractors to collect Forest Inventory and Analysis (FIA) data in New Mexico. Funded through the American Recovery and Reinvestment Act, the State partnered with the Interior West FIA Program. Together, both agencies collected data on approximately 6,450 plots. This effort represents the...

STILTS Plotting Tools

NASA Astrophysics Data System (ADS)

Taylor, M. B.

2009-09-01

The new plotting functionality in version 2.0 of STILTS is described. STILTS is a mature and powerful package for all kinds of table manipulation, and this version adds facilities for generating plots from one or more tables to its existing wide range of non-graphical capabilities. 2- and 3-dimensional scatter plots and 1-dimensional histograms may be generated using highly configurable style parameters. Features include multiple dataset overplotting, variable transparency, 1-, 2- or 3-dimensional symmetric or asymmetric error bars, higher-dimensional visualization using color, and textual point labeling. Vector and bitmapped output formats are supported. The plotting options provide enough flexibility to perform meaningful visualization on datasets from a few points up to tens of millions. Arbitrarily large datasets can be plotted without heavy memory usage.

Nonlinear Dot Plots.

PubMed

Rodrigues, Nils; Weiskopf, Daniel

2018-01-01

Conventional dot plots use a constant dot size and are typically applied to show the frequency distribution of small data sets. Unfortunately, they are not designed for a high dynamic range of frequencies. We address this problem by introducing nonlinear dot plots. Adopting the idea of nonlinear scaling from logarithmic bar charts, our plots allow for dots of varying size so that columns with a large number of samples are reduced in height. For the construction of these diagrams, we introduce an efficient two-way sweep algorithm that leads to a dense and symmetrical layout. We compensate aliasing artifacts at high dot densities by a specifically designed low-pass filtering method. Examples of nonlinear dot plots are compared to conventional dot plots as well as linear and logarithmic histograms. Finally, we include feedback from an expert review.

NEMAR plotting computer program

NASA Technical Reports Server (NTRS)

Myler, T. R.

1981-01-01

A FORTRAN coded computer program which generates CalComp plots of trajectory parameters is examined. The trajectory parameters are calculated and placed on a data file by the Near Earth Mission Analysis Routine computer program. The plot program accesses the data file and generates the plots as defined by inputs to the plot program. Program theory, user instructions, output definitions, subroutine descriptions and detailed FORTRAN coding information are included. Although this plot program utilizes a random access data file, a data file of the same type and formatted in 102 numbers per record could be generated by any computer program and used by this plot program.

Fuzzy recurrence plots

NASA Astrophysics Data System (ADS)

Pham, T. D.

2016-12-01

Recurrence plots display binary texture of time series from dynamical systems with single dots and line structures. Using fuzzy recurrence plots, recurrences of the phase-space states can be visualized as grayscale texture, which is more informative for pattern analysis. The proposed method replaces the crucial similarity threshold required by symmetrical recurrence plots with the number of cluster centers, where the estimate of the latter parameter is less critical than the estimate of the former.

[Non-neoplastic enlargement of salivary glands: clinico-histologic analysis].

PubMed

González Guevara, Martha Beatriz; Torres Tejero, Marco Antonio; Martínez Mata, Guillermo

2005-01-01

We carried out a retrospective study on non-neoplastic enlargement of the salivary glands at the Oral Histopathology Diagnostic Center of the Autonomous Metropolitan University at Xochimilco (UAM-Xochimilco) in Mexico during a period of 24 years (1979-2003). From 5,625 biopsies received and analyzed, a total of 461 (8.2%) were non-neoplastic enlargement of the salivary glands; for each case, we registered demographic data as well as clinic characteristics. These lesions were characterized as a heterogeneous group of pathologic entities among which we included local, obstructive, infectious, and immunopathologic lesions. The most frequent lesion was the extravasation cyst in 341 (74%) cases, followed by chronic sialoadenitis and Sjögren's syndrome with 54 (11.7%) and 41 (8.8%) cases, respectively, and at a lesser percentage mucous retention cyst, sialosis, benign lymphoepithelial lesions and those related with sialolytes. Females were affected more frequently; mean age was second to third life decades. These lesions were most frequently localized on inferior labial mucosa.

Plotting equation for gaussian percentiles and a spreadsheet program for generating probability plots

USGS Publications Warehouse

Balsillie, J.H.; Donoghue, J.F.; Butler, K.M.; Koch, J.L.

2002-01-01

Two-dimensional plotting tools can be of invaluable assistance in analytical scientific pursuits, and have been widely used in the analysis and interpretation of sedimentologic data. We consider, in this work, the use of arithmetic probability paper (APP). Most statistical computer applications do not allow for the generation of APP plots, because of apparent intractable nonlinearity of the percentile (or probability) axis of the plot. We have solved this problem by identifying an equation(s) for determining plotting positions of Gaussian percentiles (or probabilities), so that APP plots can easily be computer generated. An EXCEL example is presented, and a programmed, simple-to-use EXCEL application template is hereby made publicly available, whereby a complete granulometric analysis including data listing, moment measure calculations, and frequency and cumulative APP plots, is automatically produced.

NPLOT - NASTRAN PLOT

NASA Technical Reports Server (NTRS)

Mcentire, K.

1994-01-01

NPLOT is an interactive computer graphics program for plotting undeformed and deformed NASTRAN finite element models (FEMs). Although there are many commercial codes already available for plotting FEMs, these have limited use due to their cost, speed, and lack of features to view BAR elements. NPLOT was specifically developed to overcome these limitations. On a vector type graphics device the two best ways to show depth are by hidden line plotting or haloed line plotting. A hidden line algorithm generates views of models with all hidden lines removed, and a haloed line algorithm displays views with aft lines broken in order to show depth while keeping the entire model visible. A haloed line algorithm is especially useful for plotting models composed of many line elements and few surface elements. The most important feature of NPLOT is its ability to create both hidden line and haloed line views accurately and much more quickly than with any other existing hidden or haloed line algorithms. NPLOT is also capable of plotting a normal wire frame view to display all lines of a model. NPLOT is able to aid in viewing all elements, but it has special features not generally available for plotting BAR elements. These features include plotting of TRUE LENGTH and NORMALIZED offset vectors and orientation vectors. Standard display operations such as rotation and perspective are possible, but different view planes such as X-Y, Y-Z, and X-Z may also be selected. Another display option is the Z-axis cut which allows a portion of the fore part of the model to be cut away to reveal details of the inside of the model. A zoom function is available to terminals with a locator (graphics cursor, joystick, etc.). The user interface of NPLOT is designed to make the program quick and easy to use. A combination of menus and commands with help menus for detailed information about each command allows experienced users greater speed and efficiency. Once a plot is on the screen the interface

Effects of Selective Logging on Birds in the Sierra de Coalcoman, Sierra Madre del Sur, Michoacan, Western Mexico

Treesearch

Jose Fernando Villaseñor; Neyra Sosa; Laura Villaseñor

2005-01-01

In order to determine the effects of selective logging on pine-oak forest?s bird communities in central-western Mexico, we gathered information through 10-min point counts in plots without wood extraction and sites logged at different times in the past (1, 4, and 8 years). We did not find evidences to argue for effects of logging on bird communities; the study plots...

MID Plot: a new lithology technique. [Matrix identification plot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clavier, C.; Rust, D.H.

1976-01-01

Lithology interpretation by the Litho-Porosity (M-N) method has been used for years, but is evidently too cumbersome and ambiguous for widespread acceptance as a field technique. To set aside these objections, another method has been devised. Instead of the log-derived parameters M and N, the MID Plot uses quasi-physical quantities, (rho/sub ma/)/sub a/ and (..delta..t/sub ma/)/sub a/, as its porosity-independent variables. These parameters, taken from suitably scaled Neutron-Density and Sonic-Neutron crossplots, define a unique matrix mineral or mixture for each point on the logs. The matrix points on the MID Plot thus remain constant in spite of changes in mudmore » filtrate, porosity, or neutron tool types (all of which significantly affect the M-N Plot). This new development is expected to bring welcome relief in areas where lithology identification is a routine part of log analysis.« less

Geology and stratigraphy of the San Lorenzo Tezonco deep well and its correlation to surrounding ranges, Mexico Basin

NASA Astrophysics Data System (ADS)

Arce, J. L.; Layer, P. W.; Morales-Casique, E.; Benowitz, J.

2014-12-01

The San Lorenzo Tezonco deep well stratigraphy records intense episodic volcanic activity in the Mexico Basin and surroundings during the past 20 Ma. The 2008-m deep lithological column is dominated by volcanic material, either as lava flows or pyroclastic deposits (97%), and only the upper most 70 m are composed of lacustrine deposits (3%). Based on geochronology and geochemistry, the lower part of the drill core is represented by rocks correlating to the Tepoztlán Formation (876-2008 m deep) that vary in composition from basaltic-andesite to rhyolite, and ages ranging from 13 to 21.2 Ma. On the surface this formation outcrops near the towns of Malinalco and Tepoztlán, ~43 km south of the deep well. Between depths of 581 and 875 m, volcanic rocks were recovered and are interpreted as lavas from the Sierra de las Cruces that vary in composition from andesite to dacite and range in age from 0.9 Ma to 5 Ma. Additionally, we documented rocks belonging to the Xochitepec Formation, outcropping around Xochimilco, in the Mexico City, with ages ranging from 1.2 and 1.7 Ma, in contrast with the Oligocene age proposed in previous works for these rocks. These new ages plus the chemical composition data, allow us to correlate the Xochitepec rocks with Sierra de las Cruces. Upward in the drill core (510-580 m) there are andesitic rocks that correlate with the 0.25 Ma Cerro de la Estrella volcanic center. The last volcanic package found in the well is correlated to the Santa Catarina basaltic andesites (70-120 m) that are younger than 0.25 Ma, and probably Holocene. Lacustrine deposits crown the stratigraphic column of the drill core with ages probably younger than 34 ka. The San Lorenzo Tezonco well is in a graben-like structure that was filled with more than 1900 m of volcanic products, suggesting that volcanism were intense in the Miocene to the Recent, and the south drainage of the Mexico Basin was closed probably in the early Pleistocene.

Map_plot and bgg_plot: software for integration of geoscience datasets

NASA Astrophysics Data System (ADS)

Gaillot, Philippe; Punongbayan, Jane T.; Rea, Brice

2004-02-01

Since 1985, the Ocean Drilling Program (ODP) has been supporting multidisciplinary research in exploring the structure and history of Earth beneath the oceans. After more than 200 Legs, complementary datasets covering different geological environments, periods and space scales have been obtained and distributed world-wide using the ODP-Janus and Lamont Doherty Earth Observatory-Borehole Research Group (LDEO-BRG) database servers. In Earth Sciences, more than in any other science, the ensemble of these data is characterized by heterogeneous formats and graphical representation modes. In order to fully and quickly assess this information, a set of Unix/Linux and Generic Mapping Tool-based C programs has been designed to convert and integrate datasets acquired during the present ODP and the future Integrated ODP (IODP) Legs. Using ODP Leg 199 datasets, we show examples of the capabilities of the proposed programs. The program map_plot is used to easily display datasets onto 2-D maps. The program bgg_plot (borehole geology and geophysics plot) displays data with respect to depth and/or time. The latter program includes depth shifting, filtering and plotting of core summary information, continuous and discrete-sample core measurements (e.g. physical properties, geochemistry, etc.), in situ continuous logs, magneto- and bio-stratigraphies, specific sedimentological analyses (lithology, grain size, texture, porosity, etc.), as well as core and borehole wall images. Outputs from both programs are initially produced in PostScript format that can be easily converted to Portable Document Format (PDF) or standard image formats (GIF, JPEG, etc.) using widely distributed conversion programs. Based on command line operations and customization of parameter files, these programs can be included in other shell- or database-scripts, automating plotting procedures of data requests. As an open source software, these programs can be customized and interfaced to fulfill any specific

Pollen-Mediated Gene Flow in Maize: Implications for Isolation Requirements and Coexistence in Mexico, the Center of Origin of Maize.

PubMed

Baltazar, Baltazar M; Castro Espinoza, Luciano; Espinoza Banda, Armando; de la Fuente Martínez, Juan Manuel; Garzón Tiznado, José Antonio; González García, Juvencio; Gutiérrez, Marco Antonio; Guzmán Rodríguez, José Luis; Heredia Díaz, Oscar; Horak, Michael J; Madueño Martínez, Jesús Ignacio; Schapaugh, Adam W; Stojšin, Duška; Uribe Montes, Hugo Raúl; Zavala García, Francisco

2015-01-01

Mexico, the center of origin of maize (Zea mays L.), has taken actions to preserve the identity and diversity of maize landraces and wild relatives. Historically, spatial isolation has been used in seed production to maintain seed purity. Spatial isolation can also be a key component for a strategy to minimize pollen-mediated gene flow in Mexico between transgenic maize and sexually compatible plants of maize conventional hybrids, landraces, and wild relatives. The objective of this research was to generate field maize-to-maize outcrossing data to help guide coexistence discussions in Mexico. In this study, outcrossing rates were determined and modeled from eight locations in six northern states, which represent the most economically important areas for the cultivation of hybrid maize in Mexico. At each site, pollen source plots were planted with a yellow-kernel maize hybrid and surrounded by plots with a white-kernel conventional maize hybrid (pollen recipient) of the same maturity. Outcrossing rates were then quantified by assessing the number of yellow kernels harvested from white-kernel hybrid plots. The highest outcrossing values were observed near the pollen source (12.9% at 1 m distance). The outcrossing levels declined sharply to 4.6, 2.7, 1.4, 1.0, 0.9, 0.5, and 0.5% as the distance from the pollen source increased to 2, 4, 8, 12, 16, 20, and 25 m, respectively. At distances beyond 20 m outcrossing values at all locations were below 1%. These trends are consistent with studies conducted in other world regions. The results suggest that coexistence measures that have been implemented in other geographies, such as spatial isolation, would be successful in Mexico to minimize transgenic maize pollen flow to conventional maize hybrids, landraces and wild relatives.

Pollen-Mediated Gene Flow in Maize: Implications for Isolation Requirements and Coexistence in Mexico, the Center of Origin of Maize

PubMed Central

Gutiérrez, Marco Antonio; Guzmán Rodríguez, José Luis; Horak, Michael J.; Madueño Martínez, Jesús Ignacio; Schapaugh, Adam W.; Stojšin, Duška; Uribe Montes, Hugo Raúl

2015-01-01

Mexico, the center of origin of maize (Zea mays L.), has taken actions to preserve the identity and diversity of maize landraces and wild relatives. Historically, spatial isolation has been used in seed production to maintain seed purity. Spatial isolation can also be a key component for a strategy to minimize pollen-mediated gene flow in Mexico between transgenic maize and sexually compatible plants of maize conventional hybrids, landraces, and wild relatives. The objective of this research was to generate field maize-to-maize outcrossing data to help guide coexistence discussions in Mexico. In this study, outcrossing rates were determined and modeled from eight locations in six northern states, which represent the most economically important areas for the cultivation of hybrid maize in Mexico. At each site, pollen source plots were planted with a yellow-kernel maize hybrid and surrounded by plots with a white-kernel conventional maize hybrid (pollen recipient) of the same maturity. Outcrossing rates were then quantified by assessing the number of yellow kernels harvested from white-kernel hybrid plots. The highest outcrossing values were observed near the pollen source (12.9% at 1 m distance). The outcrossing levels declined sharply to 4.6, 2.7, 1.4, 1.0, 0.9, 0.5, and 0.5% as the distance from the pollen source increased to 2, 4, 8, 12, 16, 20, and 25 m, respectively. At distances beyond 20 m outcrossing values at all locations were below 1%. These trends are consistent with studies conducted in other world regions. The results suggest that coexistence measures that have been implemented in other geographies, such as spatial isolation, would be successful in Mexico to minimize transgenic maize pollen flow to conventional maize hybrids, landraces and wild relatives. PMID:26162097

PLOT3D user's manual

NASA Technical Reports Server (NTRS)

Walatka, Pamela P.; Buning, Pieter G.; Pierce, Larry; Elson, Patricia A.

1990-01-01

PLOT3D is a computer graphics program designed to visualize the grids and solutions of computational fluid dynamics. Seventy-four functions are available. Versions are available for many systems. PLOT3D can handle multiple grids with a million or more grid points, and can produce varieties of model renderings, such as wireframe or flat shaded. Output from PLOT3D can be used in animation programs. The first part of this manual is a tutorial that takes the reader, keystroke by keystroke, through a PLOT3D session. The second part of the manual contains reference chapters, including the helpfile, data file formats, advice on changing PLOT3D, and sample command files.

Aquatic Humic Substances: Relationship Between Origin and Complexing Capacity.

PubMed

González-Guadarrama, María de Jesús; Armienta-Hernández, Ma Aurora; Rosa, André H

2018-05-01

Aiming to determine the relationship between source and complexing capacity, humic substances obtained from three sites (Sorocaba and Itapanhau Brasilian rivers, and Xochimilco Lake in Mexico) were studied. Copper, manganese, zinc and arsenic complexing capacity were determined for the three substances under various pH conditions. Results showed similar complexing capacity for the three elements depending on the chemistry of each one and on the physico-chemical conditions. Speciation diagrams showed that these conditions affect both, the humic substances, and the transition metals and arsenic.

General purpose film plotting system

NASA Technical Reports Server (NTRS)

Mcquillan, C.

1977-01-01

The general purpose film plotting system which is a plot program design to handle a majority of the data tape formats presently available under OS/360 was discussed. The convenience of this program is due to the fact that the user merely describes the format of his data set and the type of data plots he desires. It processes the input data according to the given specifications. The output is generated on a tape which yields data plots when processed by the selected plotter. A summary of each job is produced on the printer.

Tracking Changes in Cardiac Output: Statistical Considerations on the 4-Quadrant Plot and the Polar Plot Methodology.

PubMed

Saugel, Bernd; Grothe, Oliver; Wagner, Julia Y

2015-08-01

When comparing 2 technologies for measuring hemodynamic parameters with regard to their ability to track changes, 2 graphical tools are omnipresent in the literature: the 4-quadrant plot and the polar plot recently proposed by Critchley et al. The polar plot is thought to be the more advanced statistical tool, but care should be taken when it comes to its interpretation. The polar plot excludes possibly important measurements from the data. The polar plot transforms the data nonlinearily, which may prevent it from being seen clearly. In this article, we compare the 4-quadrant and the polar plot in detail and thoroughly describe advantages and limitations of each. We also discuss pitfalls concerning the methods to prepare the researcher for the sound use of both methods. Finally, we briefly revisit the Bland-Altman plot for the use in this context.

Normal probability plots with confidence.

PubMed

Chantarangsi, Wanpen; Liu, Wei; Bretz, Frank; Kiatsupaibul, Seksan; Hayter, Anthony J; Wan, Fang

2015-01-01

Normal probability plots are widely used as a statistical tool for assessing whether an observed simple random sample is drawn from a normally distributed population. The users, however, have to judge subjectively, if no objective rule is provided, whether the plotted points fall close to a straight line. In this paper, we focus on how a normal probability plot can be augmented by intervals for all the points so that, if the population distribution is normal, then all the points should fall into the corresponding intervals simultaneously with probability 1-α. These simultaneous 1-α probability intervals provide therefore an objective mean to judge whether the plotted points fall close to the straight line: the plotted points fall close to the straight line if and only if all the points fall into the corresponding intervals. The powers of several normal probability plot based (graphical) tests and the most popular nongraphical Anderson-Darling and Shapiro-Wilk tests are compared by simulation. Based on this comparison, recommendations are given in Section 3 on which graphical tests should be used in what circumstances. An example is provided to illustrate the methods. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

WCPP-THE WOLF PLOTTING AND CONTOURING PACKAGE

NASA Technical Reports Server (NTRS)

Masaki, G. T.

1994-01-01

The WOLF Contouring and Plotting Package provides the user with a complete general purpose plotting and contouring capability. This package is a complete system for producing line printer, SC4020, Gerber, Calcomp, and SD4060 plots. The package has been designed to be highly flexible and easy to use. Any plot from a quick simple plot (which requires only one call to the package) to highly sophisticated plots (including motion picture plots) can be easily generated with only a basic knowledge of FORTRAN and the plot commands. Anyone designing a software system that requires plotted output will find that this package offers many advantages over the standard hardware support packages available. The WCPP package is divided into a plot segment and a contour segment. The plot segment can produce output for any combination of line printer, SC4020, Gerber, Calcomp, and SD4060 plots. The line printer plots allow the user to have plots available immediately after a job is run at a low cost. Although the resolution of line printer plots is low, the quick results allows the user to judge if a high resolution plot of a particular run is desirable. The SC4020 and SD4060 provide high speed high resolution cathode ray plots with film and hard copy output available. The Gerber and Calcomp plotters provide very high quality (of publishable quality) plots of good resolution. Being bed or drum type plotters, the Gerber and Calcomp plotters are usually slow and not suited for large volume plotting. All output for any or all of the plotters can be produced simultaneously. The types of plots supported are: linear, semi-log, log-log, polar, tabular data using the FORTRAN WRITE statement, 3-D perspective linear, and affine transformations. The labeling facility provides for horizontal labels, vertical labels, diagonal labels, vector characters of a requested size (special character fonts are easily implemented), and rotated letters. The gridding routines label the grid lines according to

Box-and-Whisker Plots.

ERIC Educational Resources Information Center

Larsen, Russell D.

1985-01-01

Box-and-whisker plots (which give rapid visualization of batches of data) can be effectively used to present diverse collections of data used in traditional first-year chemistry courses. Construction of box-and-whisker plots and their use with bond energy data and data on heats of formation and solution are discussed. (JN)

A first look at measurement error on FIA plots using blind plots in the Pacific Northwest

Treesearch

Susanna Melson; David Azuma; Jeremy S. Fried

2002-01-01

Measurement error in the Forest Inventory and Analysis work of the Pacific Northwest Station was estimated with a recently implemented blind plot measurement protocol. A small subset of plots was revisited by a crew having limited knowledge of the first crew's measurements. This preliminary analysis of the first 18 months' blind plot data indicates that...

Program Manipulates Plots For Effective Display

NASA Technical Reports Server (NTRS)

Bauer, F.; Downing, J.

1990-01-01

Windowed Observation of Relative Motion (WORM) computer program primarily intended for generation of simple X-Y plots from data created by other programs. Enables user to label, zoom, and change scales of various plots. Three-dimensional contour and line plots provided. Written in PASCAL.

Program Aids Creation Of X-Y Plots

NASA Technical Reports Server (NTRS)

Jeletic, James F.

1993-01-01

VEGAS computer program enables application programmers to create X-Y plots in various modes through high-level subroutine calls. Modes consist of passive, autoupdate, and interactive modes. In passive mode, VEGAS takes input data, produces plot, and returns control to application program. In autoupdate mode, forms plots and automatically updates them as more information received. In interactive mode, displays plot and provides popup menus for user to alter appearance of plot or to modify data. Written in FORTRAN 77.

Rhizobium etli and Rhizobium gallicum Nodulate Common Bean (Phaseolus vulgaris) in a Traditionally Managed Milpa Plot in Mexico: Population Genetics and Biogeographic Implications

PubMed Central

Silva, Claudia; Vinuesa, Pablo; Eguiarte, Luis E.; Martínez-Romero, Esperanza; Souza, Valeria

2003-01-01

The stability of the genetic structure of rhizobial populations nodulating Phaseolus vulgaris cultivated in a traditionally managed milpa plot in Mexico was studied over three consecutive years. The set of molecular markers analyzed (including partial rrs, glnII, nifH, and nodB sequences), along with host range experiments, placed the isolates examined in Rhizobium etli bv. phaseoli and Rhizobium gallicum bv. gallicum. Cluster analysis of multilocus enzyme electrophoresis and plasmid profile data separated the two species and identified numerically dominant clones within each of them. Population genetic analyses showed that there was high genetic differentiation between the two species and that there was low intrapopulation differentiation of the species over the 3 years. The results of linkage disequilibrium analyses are consistent with an epidemic genetic structure for both species, with frequent genetic exchange taking place within conspecific populations but not between the R. etli and R. gallicum populations. A subsample of isolates was selected and used for 16S ribosomal DNA PCR-restriction fragment length polymorphism analysis, nifH copy number determination, and host range experiments. Plasmid profiles and nifH hybridization patterns also revealed the occurrence of lateral plasmid transfer among distinct multilocus genotypes within species but not between species. Both species were recovered from nodules of the same plants, indicating that mechanisms other than host, spatial, or temporal isolation may account for the genetic barrier between the species. The biogeographic implications of finding an R. gallicum bv. gallicum population nodulating common bean in America are discussed. PMID:12571008

Numerical computation of Pop plot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Menikoff, Ralph

The Pop plot — distance-of-run to detonation versus initial shock pressure — is a key characterization of shock initiation in a heterogeneous explosive. Reactive burn models for high explosives (HE) must reproduce the experimental Pop plot to have any chance of accurately predicting shock initiation phenomena. This report describes a methodology for automating the computation of a Pop plot for a specific explosive with a given HE model. Illustrative examples of the computation are shown for PBX 9502 with three burn models (SURF, WSD and Forest Fire) utilizing the xRage code, which is the Eulerian ASC hydrocode at LANL. Comparisonmore » of the numerical and experimental Pop plot can be the basis for a validation test or as an aid in calibrating the burn rate of an HE model. Issues with calibration are discussed.« less

Heterogeneous Molecular Catalysis of Electrochemical Reactions: Volcano Plots and Catalytic Tafel Plots.

PubMed

Costentin, Cyrille; Savéant, Jean-Michel

2017-06-14

We analyze here, in the framework of heterogeneous molecular catalysis, the reasons for the occurrence or nonoccurrence of volcanoes upon plotting the kinetics of the catalytic reaction versus the stabilization free energy of the primary intermediate of the catalytic process. As in the case of homogeneous molecular catalysis or catalysis by surface-active metallic sites, a strong motivation of such studies relates to modern energy challenges, particularly those involving small molecules, such as water, hydrogen, oxygen, proton, and carbon dioxide. This motivation is particularly pertinent for what concerns heterogeneous molecular catalysis, since it is commonly preferred to homogeneous molecular catalysis by the same molecules if only for chemical separation purposes and electrolytic cell architecture. As with the two other catalysis modes, the main drawback of the volcano plot approach is the basic assumption that the kinetic responses depend on a single descriptor, viz., the stabilization free energy of the primary intermediate. More comprehensive approaches, investigating the responses to the maximal number of experimental factors, and conveniently expressed as catalytic Tafel plots, should clearly be preferred. This is more so in the case of heterogeneous molecular catalysis in that additional transport factors in the supporting film may additionally affect the current-potential responses. This is attested by the noteworthy presence of maxima in catalytic Tafel plots as well as their dependence upon the cyclic voltammetric scan rate.

Is there willingness to buy and pay a surcharge for agro-ecological products? Case study of the production of vegetables in Xochimilco, Mexico.

PubMed

Revollo-Fernández, Daniel

2016-04-01

Around the world there are approximately 2.5 trillion small-scale farmers, most of them subsistence farmers. In the 1970s the green revolution unfolded, which brought benefits to some producers, but it also brought costs, especially for small producers. Agro-ecology is presented as an alternative, but it is necessary to examine whether it is accepted in the markets, especially in developing countries. This study proves that there is a potential market, in this case in Mexico, but that it will depend on some socio-economic variables such as age, income, gender, product information, among others. Similarly, it is evident that buyers are willing to make an additional payment as compensation. Agro-ecology should not be considered as subsistence farming incompatible with the markets. It offers good prospects for increasing production and improving the sustainability of agriculture in marginal areas with few economic resources. © 2015 Society of Chemical Industry.

sPlot - the new global vegetation-plot database for addressing trait-environment relationships across the world's biomes

NASA Astrophysics Data System (ADS)

Purschke, Oliver; Dengler, Jürgen; Bruelheide, Helge; Chytrý, Milan; Jansen, Florian; Hennekens, Stephan; Jandt, Ute; Jiménez-Alfaro, Borja; Kattge, Jens; De Patta Pillar, Valério; Sandel, Brody; Winter, Marten

2015-04-01

The trait composition of plant communities is determined by abiotic, biotic and historical factors, but the importance of macro-climatic factors in explaining trait-environment relationships at the local scale remains unclear. Such knowledge is crucial for biogeographical and ecological theory but also relevant to devise management measures to mitigate the negative effects of climate change. To address these questions, an iDiv Working Group has established the first global vegetation-plot database (sPlot). sPlot currently contains ~700,000 plots from over 50 countries and all biomes, and is steadily growing. Approx. 70% of the most frequent species are represented by at least one trait in the global trait database TRY and gap-filled data will become available for the most common traits. We will give an overview about the structure and present content of sPlot in terms of spatial distribution, data properties and trait coverage. We will explain next steps and perspectives, present first cross-biome analyses of community-weighted mean traits and trait variability, and highlight some ecological questions that can be addressed with sPlot.

Microbiological implications of periurban agriculture and water reuse in Mexico City.

PubMed

Mazari-Hiriart, Marisa; Ponce-de-León, Sergio; López-Vidal, Yolanda; Islas-Macías, Pilar; Amieva-Fernández, Rosa Isabel; Quiñones-Falconi, Francisco

2008-05-28

Recycled treated or untreated wastewater represents an important health challenge in developing countries due to potential water related microbiological exposure. Our aim was to assess water quality and health implications in a Mexico City periurban agricultural area. A longitudinal study in the Xochimilco wetland area was conducted, and 42 sites were randomly selected from 211, including irrigation water canals and effluents of treatment plants. Sample collection took place during rainy and dry seasons (2000-2001). Microbiological parameters (total coliforms, fecal coliforms, streptococci/enterococci, and bacteria other than Vibrio grown on TCBS), Helicobacter pylori, and physicochemical parameters including trihalomethanes (THM) were determined. Fecal coliforms and fecal streptococci are appropriate indicators of human or animal fecal contamination. Fecal coliform counts surpass Mexican and World Health Organization irrigation water guidelines. Identified microorganisms associated with various pathologies in humans and domestic animals comprise Escherichia coli, Klebsiella spp., Salmonella spp., Enterobacter spp., Enterococcus spp., and Pseudomonas spp; H. pylori was also present in the water. An environmental characteristic of the canal system showed high Total Organic Carbon content and relatively low dissolved oxygen concentration; residual chlorine as a disinfection control is not efficient, but THMs do not represent a problem. During the rainy season, temperature and conductivity were higher; in contrast, pH, dissolved oxygen, ammonia, and residual chlorine were lower. This is related with the continuous load of feces from human and animal sources, and to the aquatic systems, which vary seasonally and exhibit evidence of lower water quality in effluents from treatment plants. There is a need for improvement of wastewater treatment systems, as well as more efficient monitoring, regulation, and enforcement procedures for wastewater disposal into bodies of

The precision-recall plot is more informative than the ROC plot when evaluating binary classifiers on imbalanced datasets.

PubMed

Saito, Takaya; Rehmsmeier, Marc

2015-01-01

Binary classifiers are routinely evaluated with performance measures such as sensitivity and specificity, and performance is frequently illustrated with Receiver Operating Characteristics (ROC) plots. Alternative measures such as positive predictive value (PPV) and the associated Precision/Recall (PRC) plots are used less frequently. Many bioinformatics studies develop and evaluate classifiers that are to be applied to strongly imbalanced datasets in which the number of negatives outweighs the number of positives significantly. While ROC plots are visually appealing and provide an overview of a classifier's performance across a wide range of specificities, one can ask whether ROC plots could be misleading when applied in imbalanced classification scenarios. We show here that the visual interpretability of ROC plots in the context of imbalanced datasets can be deceptive with respect to conclusions about the reliability of classification performance, owing to an intuitive but wrong interpretation of specificity. PRC plots, on the other hand, can provide the viewer with an accurate prediction of future classification performance due to the fact that they evaluate the fraction of true positives among positive predictions. Our findings have potential implications for the interpretation of a large number of studies that use ROC plots on imbalanced datasets.

Optimal design of a plot cluster for monitoring

Treesearch

Charles T. Scott

1993-01-01

Traveling costs incurred during extensive forest surveys make cluster sampling cost-effective. Clusters are specified by the type of plots, plot size, number of plots, and the distance between plots within the cluster. A method to determine the optimal cluster design when different plot types are used for different forest resource attributes is described. The method...

Presenting simulation results in a nested loop plot.

PubMed

Rücker, Gerta; Schwarzer, Guido

2014-12-12

Statisticians investigate new methods in simulations to evaluate their properties for future real data applications. Results are often presented in a number of figures, e.g., Trellis plots. We had conducted a simulation study on six statistical methods for estimating the treatment effect in binary outcome meta-analyses, where selection bias (e.g., publication bias) was suspected because of apparent funnel plot asymmetry. We varied five simulation parameters: true treatment effect, extent of selection, event proportion in control group, heterogeneity parameter, and number of studies in meta-analysis. In combination, this yielded a total number of 768 scenarios. To present all results using Trellis plots, 12 figures were needed. Choosing bias as criterion of interest, we present a 'nested loop plot', a diagram type that aims to have all simulation results in one plot. The idea was to bring all scenarios into a lexicographical order and arrange them consecutively on the horizontal axis of a plot, whereas the treatment effect estimate is presented on the vertical axis. The plot illustrates how parameters simultaneously influenced the estimate. It can be combined with a Trellis plot in a so-called hybrid plot. Nested loop plots may also be applied to other criteria such as the variance of estimation. The nested loop plot, similar to a time series graph, summarizes all information about the results of a simulation study with respect to a chosen criterion in one picture and provides a suitable alternative or an addition to Trellis plots.

Round versus rectangular: Does the plot shape matter?

NASA Astrophysics Data System (ADS)

Iserloh, Thomas; Bäthke, Lars; Ries, Johannes B.

2016-04-01

Field rainfall simulators are designed to study soil erosion processes and provide urgently needed data for various geomorphological, hydrological and pedological issues. Due to the different conditions and technologies applied, there are several methodological aspects under review of the scientific community, particularly concerning design, procedures and conditions of measurement for infiltration, runoff and soil erosion. Extensive discussions at the Rainfall Simulator Workshop 2011 in Trier and the Splinter Meeting at EGU 2013 "Rainfall simulation: Big steps forward!" lead to the opinion that the rectangular shape is the more suitable plot shape compared to the round plot. A horizontally edging Gerlach trough is installed for sample collection without forming unnatural necks as is found at round or triangle plots. Since most research groups did and currently do work with round plots at the point scale (<1m²), a precise analysis of the differences between the output of round and square plots are necessary. Our hypotheses are: - Round plot shapes disturb surface runoff, unnatural fluvial dynamics for the given plot size such as pool development especially directly at the plot's outlet occur. - A square plot shape prevent these problems. A first comparison between round and rectangular plots (Iserloh et al., 2015) indicates that the rectangular plot could indeed be the more suitable, but the rather ambiguous results make a more elaborate test setup necessary. The laboratory test setup includes the two plot shapes (round, square), a standardised silty substrate and three inclinations (2°, 6°, 12°). The analysis of the laboratory test provide results on the best performance concerning undisturbed surface runoff and soil/water sampling at the plot's outlet. The analysis of the plot shape concerning its influence on runoff and erosion shows that clear methodological standards are necessary in order to make rainfall simulation experiments comparable. Reference

The rainfall plot: its motivation, characteristics and pitfalls.

PubMed

Domanska, Diana; Vodák, Daniel; Lund-Andersen, Christin; Salvatore, Stefania; Hovig, Eivind; Sandve, Geir Kjetil

2017-05-18

A visualization referred to as rainfall plot has recently gained popularity in genome data analysis. The plot is mostly used for illustrating the distribution of somatic cancer mutations along a reference genome, typically aiming to identify mutation hotspots. In general terms, the rainfall plot can be seen as a scatter plot showing the location of events on the x-axis versus the distance between consecutive events on the y-axis. Despite its frequent use, the motivation for applying this particular visualization and the appropriateness of its usage have never been critically addressed in detail. We show that the rainfall plot allows visual detection even for events occurring at high frequency over very short distances. In addition, event clustering at multiple scales may be detected as distinct horizontal bands in rainfall plots. At the same time, due to the limited size of standard figures, rainfall plots might suffer from inability to distinguish overlapping events, especially when multiple datasets are plotted in the same figure. We demonstrate the consequences of plot congestion, which results in obscured visual data interpretations. This work provides the first comprehensive survey of the characteristics and proper usage of rainfall plots. We find that the rainfall plot is able to convey a large amount of information without any need for parameterization or tuning. However, we also demonstrate how plot congestion and the use of a logarithmic y-axis may result in obscured visual data interpretations. To aid the productive utilization of rainfall plots, we demonstrate their characteristics and potential pitfalls using both simulated and real data, and provide a set of practical guidelines for their proper interpretation and usage.

[Basis for designing a medical course curriculum].

PubMed

Villarreal, R; Bojalil, L F; Mercer, H

1977-01-01

This article sets forth the reasons for the structure given to the Division of Biology and Health on the Xochimilco campus of Metropolitan Autonomous University in Mexico: to adjust the university to the process of social change going forward in the country and gear the university to the problems of the present by avoiding the rigidity of its structure. The basic aspects of curriculum design are cited against a background of an historical analysis of the socioeconomic structure of education and health. The principles underlying the curriculum and the course work are then described on the basis of that analysis.

[Research in the Master's Degree program in Social Medicine].

PubMed

Laurell, C; Mercer, H

1981-01-01

The authors report on research as part of the master's degree in social medicine at the Metropolitan Autonomous University, Xochimilco campus, Mexico. They discuss research within the curriculum design, instructional research, teaching staff and research, and research as a source of knowledge. They explain that in order to establish guidelines for research it is necessary to consider the health-disease process and medical practice within the economic and social framework and therefore subject to analysis by the social sciences. Finally, they summarize ongoing research in the fields of social epidemiology, medical practice and planning, and human resources.

Mexico.

ERIC Educational Resources Information Center

Semaan, Leslie

The text explores Mexico's history, geography, art, religion, and lifestyles in the context of its complex economy. The text focuses on Mexico's economy and reasons for its current situation. Part I of this teaching unit includes: Teacher Overview, Why Study Mexico, Mexico Fact Sheet, Map of Mexico, the Land and Climate, History, Government,…

Storytelling in Earth sciences: The eight basic plots

NASA Astrophysics Data System (ADS)

Phillips, Jonathan

2012-11-01

Reporting results and promoting ideas in science in general, and Earth science in particular, is treated here as storytelling. Just as in literature and drama, storytelling in Earth science is characterized by a small number of basic plots. Though the list is not exhaustive, and acknowledging that multiple or hybrid plots and subplots are possible in a single piece, eight standard plots are identified, and examples provided: cause-and-effect, genesis, emergence, destruction, metamorphosis, convergence, divergence, and oscillation. The plots of Earth science stories are not those of literary traditions, nor those of persuasion or moral philosophy, and deserve separate consideration. Earth science plots do not conform those of storytelling more generally, implying that Earth scientists may have fundamentally different motivations than other storytellers, and that the basic plots of Earth Science derive from the characteristics and behaviors of Earth systems. In some cases preference or affinity to different plots results in fundamentally different interpretations and conclusions of the same evidence. In other situations exploration of additional plots could help resolve scientific controversies. Thus explicit acknowledgement of plots can yield direct scientific benefits. Consideration of plots and storytelling devices may also assist in the interpretation of published work, and can help scientists improve their own storytelling.

Corrections for Cluster-Plot Slop

Treesearch

Harry T. Valentine; Mark J. Ducey; Jeffery H. Gove; Adrian Lanz; David L.R. Affleck

2006-01-01

Cluster-plot designs, including the design used by the Forest Inventory and Analysis program of the USDA Forest Service (FIA), are attended by a complicated boundary slopover problem. Slopover occurs where inclusion zones of objects of interest cross the boundary of the area of interest. The dispersed nature of inclusion zones that arise from the use of cluster plots...

Mapped Plot Patch Size Estimates

Treesearch

Paul C. Van Deusen

2005-01-01

This paper demonstrates that the mapped plot design is relatively easy to analyze and describes existing formulas for mean and variance estimators. New methods are developed for using mapped plots to estimate average patch size of condition classes. The patch size estimators require assumptions about the shape of the condition class, limiting their utility. They may...

Vegetation resurvey is robust to plot location uncertainty

PubMed Central

Kopecký, Martin; Macek, Martin

2017-01-01

Aim Resurveys of historical vegetation plots are increasingly used for the assessment of decadal changes in plant species diversity and composition. However, historical plots are usually relocated only approximately. This potentially inflates temporal changes and undermines results. Location Temperate deciduous forests in Central Europe. Methods To explore if robust conclusions can be drawn from resurvey studies despite location uncertainty, we compared temporal changes in species richness, frequency, composition and compositional heterogeneity between exactly and approximately relocated plots. We hypothesized that compositional changes should be lower and changes in species richness should be less variable on exactly relocated plots, because pseudo-turnover inflates temporal changes on approximately relocated plots. Results Temporal changes in species richness were not more variable and temporal changes in species composition and compositional heterogeneity were not higher on approximately relocated plots. Moreover, the frequency of individual species changed similarly on both plot types. Main conclusions The resurvey of historical vegetation plots is robust to uncertainty in original plot location and, when done properly, provides reliable evidence of decadal changes in plant communities. This provides important background for other resurvey studies and opens up the possibility for large-scale assessments of plant community change. PMID:28503083

Spatially Locating FIA Plots from Pixel Values

Treesearch

Greg C. Liknes; Geoffrey R. Holden; Mark D. Nelson; Ronald E. McRoberts

2005-01-01

The USDA Forest Service Forest Inventory and Analysis (FIA) program is required to ensure the confidentiality of the geographic locations of plots. To accommodate user requests for data without releasing actual plot coordinates, FIA creates overlays of plot locations on various geospatial data, including satellite imagery. Methods for reporting pixel values associated...

Conceptual recurrence plots: revealing patterns in human discourse.

PubMed

Angus, Daniel; Smith, Andrew; Wiles, Janet

2012-06-01

Human discourse contains a rich mixture of conceptual information. Visualization of the global and local patterns within this data stream is a complex and challenging problem. Recurrence plots are an information visualization technique that can reveal trends and features in complex time series data. The recurrence plot technique works by measuring the similarity of points in a time series to all other points in the same time series and plotting the results in two dimensions. Previous studies have applied recurrence plotting techniques to textual data; however, these approaches plot recurrence using term-based similarity rather than conceptual similarity of the text. We introduce conceptual recurrence plots, which use a model of language to measure similarity between pairs of text utterances, and the similarity of all utterances is measured and displayed. In this paper, we explore how the descriptive power of the recurrence plotting technique can be used to discover patterns of interaction across a series of conversation transcripts. The results suggest that the conceptual recurrence plotting technique is a useful tool for exploring the structure of human discourse.

Evaluating Plot Designs for the Tropics

Treesearch

Paul C. van Deusen; Bruce Bayle

1991-01-01

Theory and procedures are reviewed for determining the best type of plot for a given forest inventory. A general methodology is given that clarifies the relationship between different plot designs and the associated methods to produce the inventory estimates.

An Advanced, Three-Dimensional Plotting Library for Astronomy

NASA Astrophysics Data System (ADS)

Barnes, David G.; Fluke, Christopher J.; Bourke, Paul D.; Parry, Owen T.

2006-07-01

We present a new, three-dimensional (3D) plotting library with advanced features, and support for standard and enhanced display devices. The library - s2plot - is written in c and can be used by c, c++, and fortran programs on GNU/Linux and Apple/OSX systems. s2plot draws objects in a 3D (x,y,z) Cartesian space and the user interactively controls how this space is rendered at run time. With a pgplot-inspired interface, s2plot provides astronomers with elegant techniques for displaying and exploring 3D data sets directly from their program code, and the potential to use stereoscopic and dome display devices. The s2plot architecture supports dynamic geometry and can be used to plot time-evolving data sets, such as might be produced by simulation codes. In this paper, we introduce s2plot to the astronomical community, describe its potential applications, and present some example uses of the library.

Microbiological Implications of Periurban Agriculture and Water Reuse in Mexico City

PubMed Central

Mazari-Hiriart, Marisa; Ponce-de-León, Sergio; López-Vidal, Yolanda; Islas-Macías, Pilar; Amieva-Fernández, Rosa Isabel; Quiñones-Falconi, Francisco

2008-01-01

Background Recycled treated or untreated wastewater represents an important health challenge in developing countries due to potential water related microbiological exposure. Our aim was to assess water quality and health implications in a Mexico City periurban agricultural area. Methodology/Principal Findings A longitudinal study in the Xochimilco wetland area was conducted, and 42 sites were randomly selected from 211, including irrigation water canals and effluents of treatment plants. Sample collection took place during rainy and dry seasons (2000–2001). Microbiological parameters (total coliforms, fecal coliforms, streptococci/enterococci, and bacteria other than Vibrio grown on TCBS), Helicobacter pylori, and physicochemical parameters including trihalomethanes (THM) were determined. Fecal coliforms and fecal streptococci are appropriate indicators of human or animal fecal contamination. Fecal coliform counts surpass Mexican and World Health Organization irrigation water guidelines. Identified microorganisms associated with various pathologies in humans and domestic animals comprise Escherichia coli, Klebsiella spp., Salmonella spp., Enterobacter spp., Enterococcus spp., and Pseudomonas spp; H. pylori was also present in the water. An environmental characteristic of the canal system showed high Total Organic Carbon content and relatively low dissolved oxygen concentration; residual chlorine as a disinfection control is not efficient, but THMs do not represent a problem. During the rainy season, temperature and conductivity were higher; in contrast, pH, dissolved oxygen, ammonia, and residual chlorine were lower. This is related with the continuous load of feces from human and animal sources, and to the aquatic systems, which vary seasonally and exhibit evidence of lower water quality in effluents from treatment plants. Conclusions/Significance There is a need for improvement of wastewater treatment systems, as well as more efficient monitoring, regulation

Split-plot designs for robotic serial dilution assays.

PubMed

Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

2011-12-01

This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs. © 2011, The International Biometric Society.

Lidar-based estimates of aboveground biomass in the continental US and Mexico using ground, airborne, and satellite observations

Treesearch

Ross Nelson; Hank Margolis; Paul Montesano; Guoqing Sun; Bruce Cook; Larry Corp; Hans-Erik Andersen; Ben deJong; Fernando Paz Pellat; Thaddeus Fickel; Jobriath Kauffman; Stephen Prisley

2017-01-01

Existing national forest inventory plots, an airborne lidar scanning (ALS) system, and a space profiling lidar system (ICESat-GLAS) are used to generate circa 2005 estimates of total aboveground dry biomass (AGB) in forest strata, by state, in the continental United States (CONUS) and Mexico. The airborne lidar is used to link ground observations of AGB to space lidar...

Application of mapped plots for single-owner forest surveys

Treesearch

Paul C. Van Deusen; Francis Roesch

2009-01-01

Mapped plots are used for the nation forest inventory conducted by the U.S. Forest Service. Mapped plots are also useful foro single ownership inventoires. Mapped plots can handle boundary overlap and can aprovide less variable estimates for specified forest conditions. Mapping is a good fit for fixed plot inventories where the fixed area plot is used for both mapping...

An Excel macro for generating trilinear plots.

PubMed

Shikaze, Steven G; Crowe, Allan S

2007-01-01

This computer note describes a method for creating trilinear plots in Microsoft Excel. Macros have been created in MS Excel's internal language: Visual Basic for Applications (VBA). A simple form has been set up to allow the user to input data from an Excel worksheet. The VBA macro is used to convert the triangular data (which consist of three columns of percentage data) into X-Y data. The macro then generates the axes, labels, and grid for the trilinear plot. The X-Y data are plotted as scatter data in Excel. By providing this macro in Excel, users can create trilinear plots in a quick, inexpensive manner.

Permanent field plot methodology and equipment

Treesearch

Thomas G. Cole

1993-01-01

Long-term research into the composition, phenology, yield, and growth rates of agroforests can be accomplished with the use of permanent field plots. The periodic remeasurement of these plots provides researchers a quantitative measure of what changes occur over time in indigenous agroforestry systems.

PlotXY: A High Quality Plotting System for the Herschel Interactive Processing Environment (HIPE) and the Astronomical Community

NASA Astrophysics Data System (ADS)

Panuzzo, P.; Li, J.; Caux, E.

2012-09-01

The Herschel Interactive Processing Environment (HIPE) was developed by the European Space Agency (ESA) in collaboration with NASA and the Herschel Instrument Control Centres, to provide the astronomical community a complete environment to process and analyze the data gathered by the Herschel Space Observatory. One of the most important components of HIPE is the plotting system (named PlotXY) that we present here. With PlotXY it is possible to produce easily high quality publication-ready 2D plots. It provides a long list of features, with fully configurable components, and interactive zooming. The entire code of HIPE is written in Java and is open source released under the GNU Lesser General Public License version 3. A new version of PlotXY is being developed to be independent from the HIPE code base; it is available to the software development community for the inclusion in other projects at the URL http://code.google.com/p/jplot2d/.

Box Plots in the Australian Curriculum

ERIC Educational Resources Information Center

Watson, Jane M.

2012-01-01

This article compares the definition of "box plot" as used in the "Australian Curriculum: Mathematics" with other definitions used in the education community; describes the difficulties students experience when dealing with box plots; and discusses the elaboration that is necessary to enable teachers to develop the knowledge…

Spatial heterogeneity of water quality in a highly degraded tropical freshwater ecosystem.

PubMed

Zambrano, Luis; Contreras, Victoria; Mazari-Hiriart, Marisa; Zarco-Arista, Alba E

2009-02-01

Awareness of environmental heterogeneity in ecosystems is critical for management and conservation. We used the Xochimilco freshwater system to describe the relationship between heterogeneity and human activities. This tropical aquatic ecosystem south of Mexico City is comprised of a network of interconnected canals and lakes that are influenced by agricultural and urban activities. Environmental heterogeneity was characterized by spatially extensive surveys within four regions of Xochimilco during rainy and dry seasons over 2 years. These surveys revealed a heterogeneous system that was shallow (1.1 m, SD=0.4 ), warm (17 degrees C, SD=2.9), well oxygenated (5.0 mg l(-1), SD=3), turbid (45.7 NTU SD = 26.96), and extremely nutrient-rich (NO(3)-N=15.9 mg l(-1), SD=13.7; NH(4)-N=2.88 mg l(-1), SD=4.24; and PO(4)-P=8.3 mg l(-1), SD=2.4). Most of the variables were not significantly different between years, but did differ between seasons, suggesting a dynamic system within a span of a year but with a high resilience over longer periods of time. Maps were produced using interpolations to describe distributions of all variables. There was no correlation between individual variables and land use. Consequently, we searched for relationships using all variables together by generating a combined water quality index. Significant differences in the index were apparent among the four regions. Index values also differed within individual region and individual water bodies (e.g., within canals), indicating that Xochimilco has high local heterogeneity. Using this index on a map helped to relate water quality to human activities and provides a simple and clear tool for managers and policymakers.

Spatial Heterogeneity of Water Quality in a Highly Degraded Tropical Freshwater Ecosystem

NASA Astrophysics Data System (ADS)

Zambrano, Luis; Contreras, Victoria; Mazari-Hiriart, Marisa; Zarco-Arista, Alba E.

2009-02-01

Awareness of environmental heterogeneity in ecosystems is critical for management and conservation. We used the Xochimilco freshwater system to describe the relationship between heterogeneity and human activities. This tropical aquatic ecosystem south of Mexico City is comprised of a network of interconnected canals and lakes that are influenced by agricultural and urban activities. Environmental heterogeneity was characterized by spatially extensive surveys within four regions of Xochimilco during rainy and dry seasons over 2 years. These surveys revealed a heterogeneous system that was shallow (1.1 m, SD = 0.4 ), warm (17°C, SD = 2.9), well oxygenated (5.0 mg l-1, SD = 3), turbid (45.7 NTU SD = 26.96), and extremely nutrient-rich (NO3-N = 15.9 mg l-1, SD=13.7; NH4-N = 2.88 mg l-1, SD = 4.24; and PO4-P = 8.3 mg l-1, SD = 2.4). Most of the variables were not significantly different between years, but did differ between seasons, suggesting a dynamic system within a span of a year but with a high resilience over longer periods of time. Maps were produced using interpolations to describe distributions of all variables. There was no correlation between individual variables and land use. Consequently, we searched for relationships using all variables together by generating a combined water quality index. Significant differences in the index were apparent among the four regions. Index values also differed within individual region and individual water bodies (e.g., within canals), indicating that Xochimilco has high local heterogeneity. Using this index on a map helped to relate water quality to human activities and provides a simple and clear tool for managers and policymakers.

The Doghouse Plot: History, Construction Techniques, and Application

NASA Astrophysics Data System (ADS)

Wilson, John Robert

The Doghouse Plot visually represents an aircraft's performance during combined turn-climb maneuvers. The Doghouse Plot completely describes the turn-climb capability of an aircraft; a single plot demonstrates the relationship between climb performance, turn rate, turn radius, stall margin, and bank angle. Using NASA legacy codes, Empirical Drag Estimation Technique (EDET) and Numerical Propulsion System Simulation (NPSS), it is possible to reverse engineer sufficient basis data for commercial and military aircraft to construct Doghouse Plots. Engineers and operators can then use these to assess their aircraft's full performance envelope. The insight gained from these plots can broaden the understanding of an aircraft's performance and, in turn, broaden the operational scope of some aircraft that would otherwise be limited by the simplifications found in their Airplane Flight Manuals (AFM). More importantly, these plots can build on the current standards of obstacle avoidance and expose risks in operation.

SPRUCE Shrub-Layer Growth Assessments in S1-Bog Plots and SPRUCE Experimental Plots beginning in 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanson, P.J.; Phillips, J.R.; Brice, D.J.

This data set reports shrub layer growth assessments for the S1-Bog on the Marcell Experimental Forest in Minnesota from 2010 through 2017. Data were obtained by destructively harvesting two 0.25 m2 plots within defined plot areas of the S1-Bog or SPRUCE experimental plots. In 2015, SPRUCE plots 4, 6, 8, 10, 11, 13, 16, 17, 19 and 20 were enclosed in the SPRUCE enclosures. Prior to 2015 all data are for open ambient conditions. In early years a distinct hummock and a hollow sampling square were both collected, but in later years unsampled hollow areas became unavailable due to priormore » sampling or instrument installations. All vegetation material above the Sphagnum surface of the bog was clipped and transferred to plastic storage bags which were then frozen until the samples could be sorted. Sorting was done by species, tissue type (leaves vs. stems) and tissue age (current-year vs. older tissues).« less

Characterization of Escherichia coli Isolates from an Urban Lake Receiving Water from a Wastewater Treatment Plant in Mexico City: Fecal Pollution and Antibiotic Resistance.

PubMed

Rosas, Irma; Salinas, Eva; Martínez, Leticia; Cruz-Córdova, Ariadnna; González-Pedrajo, Bertha; Espinosa, Norma; Amábile-Cuevas, Carlos F

2015-10-01

The presence of enteric bacteria in water bodies is a cause of public health concerns, either by directly causing water- and food-borne diseases, or acting as reservoirs for antibiotic resistance determinants. Water is used for crop irrigation; and sediments and aquatic plants are used as fertilizing supplements and soil conditioners. In this work, the bacterial load of several micro-environments of the urban lake of Xochimilco, in Mexico City, was characterized. We found a differential distribution of enteric bacteria between the water column, sediment, and the rhizoplane of aquatic plants, with human fecal bacteria concentrating in the sediment, pointing to the need to assess such bacterial load for each micro-environment, for regulatory agricultural purposes, instead of only the one of the water, as is currently done. Resistance to tetracycline, ampicillin, chloramphenicol, and trimethoprim-sulfamethoxazole was common among Escherichia coli isolates, but was also differentially distributed, being again higher in sediment isolates. A distinct distribution of chloramphenicol minimum inhibitory concentrations (MIC) among these isolates suggests the presence of a local selective pressure favoring lower MICs than those of isolates from treated water. Fecal bacteria of human origin, living in water bodies along with their antibiotic resistance genes, could be much more common than typically considered, and pose a higher health risk, if assessments are only made on the water column of such bodies.

Adjusted variable plots for Cox's proportional hazards regression model.

PubMed

Hall, C B; Zeger, S L; Bandeen-Roche, K J

1996-01-01

Adjusted variable plots are useful in linear regression for outlier detection and for qualitative evaluation of the fit of a model. In this paper, we extend adjusted variable plots to Cox's proportional hazards model for possibly censored survival data. We propose three different plots: a risk level adjusted variable (RLAV) plot in which each observation in each risk set appears, a subject level adjusted variable (SLAV) plot in which each subject is represented by one point, and an event level adjusted variable (ELAV) plot in which the entire risk set at each failure event is represented by a single point. The latter two plots are derived from the RLAV by combining multiple points. In each point, the regression coefficient and standard error from a Cox proportional hazards regression is obtained by a simple linear regression through the origin fit to the coordinates of the pictured points. The plots are illustrated with a reanalysis of a dataset of 65 patients with multiple myeloma.

Recurrence plot statistics and the effect of embedding

NASA Astrophysics Data System (ADS)

March, T. K.; Chapman, S. C.; Dendy, R. O.

2005-01-01

Recurrence plots provide a graphical representation of the recurrent patterns in a timeseries, the quantification of which is a relatively new field. Here we derive analytical expressions which relate the values of key statistics, notably determinism and entropy of line length distribution, to the correlation sum as a function of embedding dimension. These expressions are obtained by deriving the transformation which generates an embedded recurrence plot from an unembedded plot. A single unembedded recurrence plot thus provides the statistics of all possible embedded recurrence plots. If the correlation sum scales exponentially with embedding dimension, we show that these statistics are determined entirely by the exponent of the exponential. This explains the results of Iwanski and Bradley [J.S. Iwanski, E. Bradley, Recurrence plots of experimental data: to embed or not to embed? Chaos 8 (1998) 861-871] who found that certain recurrence plot statistics are apparently invariant to embedding dimension for certain low-dimensional systems. We also examine the relationship between the mutual information content of two timeseries and the common recurrent structure seen in their recurrence plots. This allows time-localized contributions to mutual information to be visualized. This technique is demonstrated using geomagnetic index data; we show that the AU and AL geomagnetic indices share half their information, and find the timescale on which mutual features appear.

The Heuristic Interpretation of Box Plots

ERIC Educational Resources Information Center

Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

2013-01-01

Box plots are frequently used, but are often misinterpreted by students. Especially the area of the box in box plots is often misinterpreted as representing number or proportion of observations, while it actually represents their density. In a first study, reaction time evidence was used to test whether heuristic reasoning underlies this…

iCanPlot: Visual Exploration of High-Throughput Omics Data Using Interactive Canvas Plotting

PubMed Central

Sinha, Amit U.; Armstrong, Scott A.

2012-01-01

Increasing use of high throughput genomic scale assays requires effective visualization and analysis techniques to facilitate data interpretation. Moreover, existing tools often require programming skills, which discourages bench scientists from examining their own data. We have created iCanPlot, a compelling platform for visual data exploration based on the latest technologies. Using the recently adopted HTML5 Canvas element, we have developed a highly interactive tool to visualize tabular data and identify interesting patterns in an intuitive fashion without the need of any specialized computing skills. A module for geneset overlap analysis has been implemented on the Google App Engine platform: when the user selects a region of interest in the plot, the genes in the region are analyzed on the fly. The visualization and analysis are amalgamated for a seamless experience. Further, users can easily upload their data for analysis—which also makes it simple to share the analysis with collaborators. We illustrate the power of iCanPlot by showing an example of how it can be used to interpret histone modifications in the context of gene expression. PMID:22393367

Faithfulness of Recurrence Plots: A Mathematical Proof

NASA Astrophysics Data System (ADS)

Hirata, Yoshito; Komuro, Motomasa; Horai, Shunsuke; Aihara, Kazuyuki

It is practically known that a recurrence plot, a two-dimensional visualization of time series data, can contain almost all information related to the underlying dynamics except for its spatial scale because we can recover a rough shape for the original time series from the recurrence plot even if the original time series is multivariate. We here provide a mathematical proof that the metric defined by a recurrence plot [Hirata et al., 2008] is equivalent to the Euclidean metric under mild conditions.

Computer routine adds plotting capabilities to existing programs

NASA Technical Reports Server (NTRS)

Harris, J. C.; Linnekin, J. S.

1966-01-01

PLOTAN, a generalized plot analysis routine written for the IBM 7094 computer, minimizes the difficulties in adding plot capabilities to large existing programs. PLOTAN is used in conjunction with a binary tape writing routine and has the ability to plot any variable on the intermediate binary tape as a function of any other.

National FIA plot intensification procedure report

Treesearch

Jock A. Blackard; Paul L. Patterson

2014-01-01

The Forest Inventory and Analysis (FIA) program of the U.S. Forest Service (USFS) measures a spatially distributed base grid of forest inventory plots across the United States. The sampling intensity of plots may be increased in some regions when warranted by specific inventory objectives. Several intensification methods have been developed within FIA and USFS National...

Mexico

NASA Technical Reports Server (NTRS)

2002-01-01

This true-color image of Mexico was acquired by the Moderate-resolution Imaging Spectroradiometer (MODIS), flying aboard NASA's Terra spacecraft. In areal extent, Mexico is the third largest country on the continent of North America (not counting Greenland, which is a province of Denmark), comprised of almost 2 million square kilometers (756,000 square miles) of land. Home to roughly 100 million people, Mexico is second only to the United States in population, making it the world's largest Spanish-speaking nation. To the north, Mexico shares its border with the United States-a line that runs some 3,100 kilometers (1,900 miles) east to west. About half of this border is defined by the Rio Grande River, which runs southeast to the Gulf of Mexico (partially obscured by clouds in this image) and marks the dividing line between Texas and Mexico. Toward the upper left (northwest) corner of this image is the Baja California peninsula, which provides the western land boundary for the Gulf of California. Toward the northwestern side of the Mexican mainland, you can see the Sierra Madre Occidental Mountains (brownish pixels) running southeast toward Lake Chapala and the city of Guadalajara. About 400 km (250 miles) east and slightly south of Lake Chapala is the capital, Mexico City. Extending northward from Mexico City is the Sierra Madre Oriental Mountains, the irregular line of brownish pixels that seem to frame the western edges of the bright white cumulus clouds in this image. Between these two large mountain ranges is a large, relatively dry highland region. To the south, Mexico shares borders with Guatemala and Belize, both of which are located south of Mexico's Yucatan Peninsula. Image courtesy Reto Stockli, Brian Montgomery, and Robert Simmon, based on data from the MODIS Science Team

Woody plant diversity and structure of shade-grown-coffee plantations in northern Chiapas, Mexico.

PubMed

Soto-Pinto, L; Romero-Alvarado, Y; Caballero-Nieto, J; Segura Warnholtz, G

2001-01-01

Shade-grown coffee is an agricultural system that contains some forest-like characteristics. However, structure and diversity are poorly known in shade coffee systems. In 61 coffee-growers' plots of Chiapas, Mexico, structural variables of shade vegetation and coffee yields were measured, recording species and their use. Coffee stands had five vegetation strata. Seventy seven woody species mostly used as wood were found (mean density 371.4 trees per hectare). Ninety percent were native species (40% of the local flora), the remaining were introduced species, mainly fruit trees/shrubs. Diametric distribution resembles that of a secondary forest. Principal Coordinates Analysis grouped plots in four classes by the presence of Inga, however the majority of plots are diverse. There was no difference in equitability among groups or coffee yields. Coffee yield was 835 g clean coffee per shrub, or ca. 1,668 kg ha-1. There is a significant role of shade-grown coffee as diversity refuge for woody plants and presumably associated fauna as well as an opportunity for shade-coffee growers to participate in the new biodiversity-friendly-coffee market.

The poor man's Geographic Information System: plot expansion factors

Treesearch

Paul C. Van Deusen

2007-01-01

Plot expansion factors can serve as a crude Geographic Information System for users of Forest Inventory and Analysis (FIA) data. Each FIA plot has an associated expansion factor that is often interpreted as the number of forested acres that the plot represents. The derivation of expansion factors is discussed and it is shown that the mapped plot design requires a...

Measurements of smoke from chipped and unchipped plots

Treesearch

Gary L. Achtemeier; Jeff Glitzenstein; Luke P. Naeher

2006-01-01

Smoke data were collected from two instrumented plots located on the Francis Marion National Forest in South Carolina during prescribed burns on Feb. 12, 2003. One of the plots had been subjected to mechanical chipping. Particulate matter (PM2.5) data analyzed by gravimetric methods were collected at nine locations on the downwind sides of each plot. In addition,...

Genome U-Plot: a whole genome visualization.

PubMed

Gaitatzes, Athanasios; Johnson, Sarah H; Smadbeck, James B; Vasmatzis, George

2018-05-15

The ability to produce and analyze whole genome sequencing (WGS) data from samples with structural variations (SV) generated the need to visualize such abnormalities in simplified plots. Conventional two-dimensional representations of WGS data frequently use either circular or linear layouts. There are several diverse advantages regarding both these representations, but their major disadvantage is that they do not use the two-dimensional space very efficiently. We propose a layout, termed the Genome U-Plot, which spreads the chromosomes on a two-dimensional surface and essentially quadruples the spatial resolution. We present the Genome U-Plot for producing clear and intuitive graphs that allows researchers to generate novel insights and hypotheses by visualizing SVs such as deletions, amplifications, and chromoanagenesis events. The main features of the Genome U-Plot are its layered layout, its high spatial resolution and its improved aesthetic qualities. We compare conventional visualization schemas with the Genome U-Plot using visualization metrics such as number of line crossings and crossing angle resolution measures. Based on our metrics, we improve the readability of the resulting graph by at least 2-fold, making apparent important features and making it easy to identify important genomic changes. A whole genome visualization tool with high spatial resolution and improved aesthetic qualities. An implementation and documentation of the Genome U-Plot is publicly available at https://github.com/gaitat/GenomeUPlot. vasmatzis.george@mayo.edu. Supplementary data are available at Bioinformatics online.

A Performance Comparison on the Probability Plot Correlation Coefficient Test using Several Plotting Positions for GEV Distribution.

NASA Astrophysics Data System (ADS)

Ahn, Hyunjun; Jung, Younghun; Om, Ju-Seong; Heo, Jun-Haeng

2014-05-01

It is very important to select the probability distribution in Statistical hydrology. Goodness of fit test is a statistical method that selects an appropriate probability model for a given data. The probability plot correlation coefficient (PPCC) test as one of the goodness of fit tests was originally developed for normal distribution. Since then, this test has been widely applied to other probability models. The PPCC test is known as one of the best goodness of fit test because it shows higher rejection powers among them. In this study, we focus on the PPCC tests for the GEV distribution which is widely used in the world. For the GEV model, several plotting position formulas are suggested. However, the PPCC statistics are derived only for the plotting position formulas (Goel and De, In-na and Nguyen, and Kim et al.) in which the skewness coefficient (or shape parameter) are included. And then the regression equations are derived as a function of the shape parameter and sample size for a given significance level. In addition, the rejection powers of these formulas are compared using Monte-Carlo simulation. Keywords: Goodness-of-fit test, Probability plot correlation coefficient test, Plotting position, Monte-Carlo Simulation ACKNOWLEDGEMENTS This research was supported by a grant 'Establishing Active Disaster Management System of Flood Control Structures by using 3D BIM Technique' [NEMA-12-NH-57] from the Natural Hazard Mitigation Research Group, National Emergency Management Agency of Korea.

Influence plots for LASSO

DOE PAGES

Jang, Dae -Heung; Anderson-Cook, Christine Michaela

2016-11-22

With many predictors in regression, fitting the full model can induce multicollinearity problems. Least Absolute Shrinkage and Selection Operation (LASSO) is useful when the effects of many explanatory variables are sparse in a high-dimensional dataset. Influential points can have a disproportionate impact on the estimated values of model parameters. Here, this paper describes a new influence plot that can be used to increase understanding of the contributions of individual observations and the robustness of results. This can serve as a complement to other regression diagnostics techniques in the LASSO regression setting. Using this influence plot, we can find influential pointsmore » and their impact on shrinkage of model parameters and model selection. Lastly, we provide two examples to illustrate the methods.« less

Influence plots for LASSO

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jang, Dae -Heung; Anderson-Cook, Christine Michaela

With many predictors in regression, fitting the full model can induce multicollinearity problems. Least Absolute Shrinkage and Selection Operation (LASSO) is useful when the effects of many explanatory variables are sparse in a high-dimensional dataset. Influential points can have a disproportionate impact on the estimated values of model parameters. Here, this paper describes a new influence plot that can be used to increase understanding of the contributions of individual observations and the robustness of results. This can serve as a complement to other regression diagnostics techniques in the LASSO regression setting. Using this influence plot, we can find influential pointsmore » and their impact on shrinkage of model parameters and model selection. Lastly, we provide two examples to illustrate the methods.« less

Properties of added variable plots in Cox's regression model.

PubMed

Lindkvist, M

2000-03-01

The added variable plot is useful for examining the effect of a covariate in regression models. The plot provides information regarding the inclusion of a covariate, and is useful in identifying influential observations on the parameter estimates. Hall et al. (1996) proposed a plot for Cox's proportional hazards model derived by regarding the Cox model as a generalized linear model. This paper proves and discusses properties of this plot. These properties make the plot a valuable tool in model evaluation. Quantities considered include parameter estimates, residuals, leverage, case influence measures and correspondence to previously proposed residuals and diagnostics.

MetaPlotR: a Perl/R pipeline for plotting metagenes of nucleotide modifications and other transcriptomic sites.

PubMed

Olarerin-George, Anthony O; Jaffrey, Samie R

2017-05-15

An increasing number of studies are mapping protein binding and nucleotide modifications sites throughout the transcriptome. Often, these sites cluster in certain regions of the transcript, giving clues to their function. Hence, it is informative to summarize where in the transcript these sites occur. A metagene is a simple and effective tool for visualizing the distribution of sites along a simplified transcript model. In this work, we introduce MetaPlotR, a Perl/R pipeline for creating metagene plots. The code and associated tutorial are available at https://github.com/olarerin/metaPlotR . srj2003@med.cornell.edu. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Plot Description (PD)

Treesearch

Robert E. Keane

2006-01-01

The Plot Description (PD) form is used to describe general characteristics of the FIREMON macroplot to provide ecological context for data analyses. The PD data characterize the topographical setting, geographic reference point, general plant composition and cover, ground cover, fuels, and soils information. This method provides the general ecological data that can be...

HEATPLOT: a temperature distribution plotting program for heating

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elrod, D.C.; Turner, W.D.

1977-07-01

HEATPLOT is a temperature distribution plotting program that may be used with HEATING5, a generalized heat conduction code. HEATPLOT is capable of drawing temperature contours (isotherms), temperature-time profiles, and temperature-distance profiles from the current HEATING5 temperature distribution or from temperature changes relative to the initial temperature distribution. Contour plots may be made for two- or three-dimensional models. Temperature-time profiles and temperature-distance profiles may be made for one-, two-, and three-dimensional models. HEATPLOT is an IBM 360/370 computer code which uses the DISSPLA plotting package. Plots may be created on the CALCOMP pen-and-ink, and CALCOMP cathode ray tube (CRT), or themore » EAI pen-and-ink plotters. Printer plots may be produced or a compressed data set that may be routed to any of the available plotters may be made.« less

Presence of polycyclic aromatic hydrocarbons (PAHs) in apple in rural terrains from Mexico City.

PubMed

Salinas, Rutilio Ortiz; González, Gilberto Díaz; Bermudez, Beatriz Schettino; Tolentino, Rey Gutiérrez; Vega Y León, Salvador

2010-08-01

This paper describes PAH concentrations in apple crops that are growing in rural terrains in Mexico City. The concentrations of individual PAHs showed great variability, there being low and high molecular weight compounds in dry (high molecular weight for Tlahuac 7.06 microg/g and Milpa Alta 3.96 microg/g) and wet months (high molecular weight for Tlahuac 11.25 microg/g and Milpa Alta 12.05 microg/g). Some PAHs indicators and cross plot ratios Ant/(Ant + Phe) and Flu/(Flu + Pyr) define fossil fuels and vegetation combustion as the source of contamination over the cuticle of the apples. It is likely that deposition (dry and wet) is the principal source o f contamination over the apple surface. This study reveals the presence of PAHs in apples due to the high air contamination of Mexico City.

Study of the lithology, petrology and rock chemistry for the Pyramid Mountains, New Mexico

NASA Technical Reports Server (NTRS)

Grant, S. K.

1985-01-01

Rock and soil samples were collected at 24 sites within the Pyramid Mountains of southwestern New Mexico. The site locations are specified as 10-acre plots within the Section, Township, and Range land survey system. Hand specimen are described. The specimen were analyzed by X-ray fluorescence. The technique is designed to obtain good analysis for silica. The other elements are run so that matrix factor logic can be used to adjust the silica intensities, and to compensate for the element interaction.

A fast hidden line algorithm for plotting finite element models

NASA Technical Reports Server (NTRS)

Jones, G. K.

1982-01-01

Effective plotting of finite element models requires the use of fast hidden line plot techniques that provide interactive response. A high speed hidden line technique was developed to facilitate the plotting of NASTRAN finite element models. Based on testing using 14 different models, the new hidden line algorithm (JONES-D) appears to be very fast: its speed equals that for normal (all lines visible) plotting and when compared to other existing methods it appears to be substantially faster. It also appears to be very reliable: no plot errors were observed using the new method to plot NASTRAN models. The new algorithm was made part of the NPLOT NASTRAN plot package and was used by structural analysts for normal production tasks.

Advancements in LiDAR-based registration of FIA field plots

Treesearch

Demetrios Gatziolis

2012-01-01

Meaningful integration of National Forest Inventory field plot information with spectral imagery acquired from satellite or airborne platforms requires precise plot registration. Global positioning system-based plot registration procedures, such as the one employed by the Forest Inventory and Analysis (FIA) Program, yield plot coordinates that, although adequate for...

Mexico.

PubMed

1988-02-01

Focus in this discussion of Mexico is on the following: geography; the people; history; political conditions; the economy; foreign relations; and relations between the US and Mexico. As of July 1987, the population of Mexico numbered 81.9 million with an estimated annual growth rate of 2.09%. 60% of the population is Indian-Spanish (mestizo), 30% American Indian, 9% white, and 1% other. Mexico is the most populous Spanish-speaking country in the world and the 2nd most populous country in Latin America. Education is decentralized and expanded. Mexico's topography ranges from low desert plains and jungle-like coastal strips to high plateaus and rugged mountains. Hernan Cortes conquered Mexico in 1919-21 and founded a Spanish colony that lasted for almost 300 years. Independence from Spain was proclaimed by Father Miguel Hidalgo on September 16, 1810; the republic was established on December 6, 1822. Mexico's constitution of 1917 provides for a federal republic with a separation of powers into independent executive, legislative, and judicial branches of government. Significant political themes of the administration of President Miguel de la Madrid Hurtado, who began his 6-year term in 1982, have been restructuring the economy, liberalizing trade practices, decentralizing government services, and eliminating corruption among public servants. In 1987, estimates put the real growth of the Mexican economy at 1.5%; the gross domestic product (GDP) had shrunk by 3.5% in 1986. Yet, on the positive side, Mexico's international reserves increased to record levels in 1987 (to about $15 billion), and its current account surplus reached more than $3 billion. Mexico has made considerable progress in moving to restructure its economy. It has substantially reduced impediments to international trade and has moved to reduce the number of parastatal firms. 1987 was the 2nd consecutive year in which Mexico recorded triple-digit inflation; inflation reached 158.8%. Other problems include

CFD Extraction Tool for TecPlot From DPLR Solutions

NASA Technical Reports Server (NTRS)

Norman, David

2013-01-01

This invention is a TecPlot macro of a computer program in the TecPlot programming language that processes data from DPLR solutions in TecPlot format. DPLR (Data-Parallel Line Relaxation) is a NASA computational fluid dynamics (CFD) code, and TecPlot is a commercial CFD post-processing tool. The Tec- Plot data is in SI units (same as DPLR output). The invention converts the SI units into British units. The macro modifies the TecPlot data with unit conversions, and adds some extra calculations. After unit conversions, the macro cuts a slice, and adds vectors on the current plot for output format. The macro can also process surface solutions. Existing solutions use manual conversion and superposition. The conversion is complicated because it must be applied to a range of inter-related scalars and vectors to describe a 2D or 3D flow field. It processes the CFD solution to create superposition/comparison of scalars and vectors. The existing manual solution is cumbersome, open to errors, slow, and cannot be inserted into an automated process. This invention is quick and easy to use, and can be inserted into an automated data-processing algorithm.

Method development and validation for the simultaneous determination of organochlorine and organophosphorus pesticides in a complex sediment matrix.

PubMed

Alcántara-Concepción, Victor; Cram, Silke; Gibson, Richard; Ponce de León, Claudia; Mazari-Hiriart, Marisa

2013-01-01

The Xochimilco area in the southeastern part of Mexico City has a variety of socioeconomic activities, such as periurban agriculture, which is of great importance in the Mexico City metropolitan area. Pesticides are used extensively, some being legal, mostly chlorpyrifos and malathion, and some illegal, mostly DDT. Sediments are a common sink for pesticides in aquatic systems near agricultural areas, and Xochimilco sediments have a complex composition with high contents of organic matter and clay that are ideal adsorption sites for organochlorine (OC) and organophosphorus (OP) pesticides. Therefore, it is important to have a quick, affordable, and reliable method to determine these pesticides. Conventional methods for the determination of OC and OP pesticides are long, laborious, and costly owing to the high volume of solvents and adsorbents. The present study developed and validated a method for determining 18 OC and five OP pesticides in sediments with high organic and clay contents. In contrast with other methods described in the literature, this method allows isolation of the 23 pesticides with a 12 min microwave-assisted extraction (MAE) and one-step cleanup of pesticides. The method developed is a simpler, time-saving procedure that uses only 3.5 g of dry sediment. The use of MAE eliminates excessive handling and the possible loss of analytes. It was shown that the use of LC-Si cartridges with hexane-ethyl acetate (75+25, v/v) in the cleanup procedure recovered all pesticides with rates between 70 and 120%. The validation parameters demonstrated good performance of the method, with intermediate precision ranging from 7.3 to 17.0%, HorRat indexes all below 0.5, and tests of accuracy with the 23 pesticides at three concentration levels demonstrating recoveries ranging from 74 to 114% and RSDs from 3.3 to 12.7%.

ResidPlots-2: Computer Software for IRT Graphical Residual Analyses

ERIC Educational Resources Information Center

Liang, Tie; Han, Kyung T.; Hambleton, Ronald K.

2009-01-01

This article discusses the ResidPlots-2, a computer software that provides a powerful tool for IRT graphical residual analyses. ResidPlots-2 consists of two components: a component for computing residual statistics and another component for communicating with users and for plotting the residual graphs. The features of the ResidPlots-2 software are…

SplicePlot: a utility for visualizing splicing quantitative trait loci.

PubMed

Wu, Eric; Nance, Tracy; Montgomery, Stephen B

2014-04-01

RNA sequencing has provided unprecedented resolution of alternative splicing and splicing quantitative trait loci (sQTL). However, there are few tools available for visualizing the genotype-dependent effects of splicing at a population level. SplicePlot is a simple command line utility that produces intuitive visualization of sQTLs and their effects. SplicePlot takes mapped RNA sequencing reads in BAM format and genotype data in VCF format as input and outputs publication-quality Sashimi plots, hive plots and structure plots, enabling better investigation and understanding of the role of genetics on alternative splicing and transcript structure. Source code and detailed documentation are available at http://montgomerylab.stanford.edu/spliceplot/index.html under Resources and at Github. SplicePlot is implemented in Python and is supported on Linux and Mac OS. A VirtualBox virtual machine running Ubuntu with SplicePlot already installed is also available.

Reaction Order Ambiguity in Integrated Rate Plots

ERIC Educational Resources Information Center

Lee, Joe

2008-01-01

Integrated rate plots are frequently used in reaction kinetics to determine orders of reactions. It is often emphasised, when using this methodology in practice, that it is necessary to monitor the reaction to a substantial fraction of completion for these plots to yield unambiguous orders. The present article gives a theoretical and statistical…

BOREAS TE-23 Map Plot Data

NASA Technical Reports Server (NTRS)

Rich, Paul M.; Fournier, Robert; Hall, Forrest G. (Editor); Papagno, Andrea (Editor)

2000-01-01

The Boreal Ecosystem-Atmospheric Study (BOREAS) TE-23 (Terrestrial Ecology) team collected map plot data in support of its efforts to characterize and interpret information on canopy architecture and understory cover at the BOREAS tower flux sites and selected auxiliary sites from May to August 1994. Mapped plots (typical dimensions 50 m x 60 m) were set up and characterized at all BOREAS forested tower flux and selected auxiliary sites. Detailed measurement of the mapped plots included: (1) stand characteristics (location, density, basal area); (2) map locations diameter at breast height (DBH) of all trees; (3) detailed geometric measures of a subset of trees (height, crown dimensions); and (4) understory cover maps. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Long-term tree inventory data from mountain forest plots in France.

PubMed

Fuhr, Marc; Cordonnier, Thomas; Courbaud, Benoît; Kunstler, Georges; Mermin, Eric; Riond, Catherine; Tardif, Pascal

2017-04-01

We present repeated tree measurement data from 63 permanent plots in mountain forests in France. Plot elevations range from 800 (lower limit of the montane belt) to 1942 m above sea level (subalpine belt). Forests mainly consist of pure or mixed stands dominated by European beech (Fagus sylvatica), Silver fir (Abies alba), and Norway spruce (Picea abies), in association with various broadleaved species at low elevation and with Arolla pine (Pinus cembra) at high elevation. The plot network includes 23 plots in stands that have not been managed for the last 40 years (at least) and 40 plots in plots managed according to an uneven-aged system with single-tree or small-group selection cutting. Plot sizes range from 0.2 to 1.9 ha. Plots were installed from 1994 to 2004 and remeasured two to five times during the 1994-2015 period. During the first census (installation), living trees more than 7.5 cm in dbh were identified, their diameter at breast height (dbh) was measured and their social status (strata) noted. Trees were spatially located, either with x, y, and z coordinates (40 plots) or within 0.25-ha square subplots (23 plots). In addition, in a subset of plots (58 plots), tree heights and tree crown dimensions were measured on a subset of trees and dead standing trees and stumps were included in the census. Remeasurements after installation include live tree diameters (including recruited trees), tree status (living, damaged, dead, stump), and for a subset of trees, height. At the time of establishment of the plots, plot densities range from 181 to 1328 stems/ha and plot basal areas range from 13.6 to 81.3 m 2 /ha. © 2017 by the Ecological Society of America.

PET kinetic analysis --pitfalls and a solution for the Logan plot.

PubMed

Kimura, Yuichi; Naganawa, Mika; Shidahara, Miho; Ikoma, Yoko; Watabe, Hiroshi

2007-01-01

The Logan plot is a widely used algorithm for the quantitative analysis of neuroreceptors using PET because it is easy to use and simple to implement. The Logan plot is also suitable for receptor imaging because its algorithm is fast. However, use of the Logan plot, and interpretation of the formed receptor images should be regarded with caution, because noise in PET data causes bias in the Logan plot estimates. In this paper, we describe the basic concept of the Logan plot in detail and introduce three algorithms for the Logan plot. By comparing these algorithms, we demonstrate the pitfalls of the Logan plot and discuss the solution.

Seasonal variations of rotifers from a high altitude urban shallow water body, La Cantera Oriente (Mexico City, Mexico)

NASA Astrophysics Data System (ADS)

Gutiérrez, Sergio González; Sarma, S. S. S.; Nandini, S.

2017-11-01

La Cantera Oriente is a shallow freshwater volcanic water body located at an altitude of 2 270 m above sea level in the Ecological Reserve of San Angel Pedregal of Mexico City (Mexico). In order to ensure the conservation of its biological heritage including zooplankton, the present work was undertaken to quantify the seasonal changes in the diversity and density of rotifers and the selected physico-chemical variables during 2013-2014. Qualitative analysis of the zooplankton samples yielded 68 rotifer species which represented 24 genera in 15 families. B rachionus calyciflorus Pallas, 1766, B. quadridentatus Hermann, 1783, Polyarthra vulgaris Carlin, 1943, Lecane closterocerca (Schmarda, 1859) and Keratella cochlearis (Gosse, 1851) were the most common species. Preston plots of species frequency-density revealed that as many as 30% of the rotifer taxa were dominant throughout the year. The species with high population densities were Brachionus quadridentatus, Lecane closterocerca, Keratella cochlearis, and Lepadella patella; their peak densities were 2 000, 1 000, 180 and 90 ind./L, all occurring in summer. Canonical correspondence analysis showed that Platyias quadricornis was related to the concentration of phosphates available in the environment and the conductivity, while B. quadridentatus was positively correlated with chlorophyll- a. The trophic status of the lake was eutrophic based on Chl- a content but oligotrophic with relation to the Brachionus: Trichocerca ratio.

Digital data collection in forest dynamics plots

Treesearch

Faith Inman-Narahari; Christian Giardina; Rebecca Ostertag; Susan Cordell; Lawren Sack

2010-01-01

Summary 1. Computers are widely used in all aspects of research but their application to in-field data collection for forest plots has rarely been evaluated. 2. We developed digital data collection methods using ESRI mapping software and ruggedized field computers to map and measure ~30 000 trees in two 4-ha forest dynamics plots in wet and dry...

Longleaf pine regeneration following Hurricane Ivan utilizing the RLGS plots

Treesearch

John C. Gilbert; John S. Kush

2013-01-01

On September 16, 2004, Hurricane Ivan hit the Alabama coast and severely impacted numerous plots in the U.S. Forest Service’s Regional Longleaf Growth Study (RLGS). The Escambia Experimental Forest (EEF) has 201 of the 325 RLGS plots. Nearly one-third of the EEF was impacted. Nine plots with pole-sized trees were entirely lost. Another 54 plots had some type of damage...

[Blood pressure was associated with body mass but no with pre- and postnatal growth in Mexican school-children].

PubMed

Cruz Angeles, Laura Isabel; Ortiz-Hernández, Luis

2006-01-01

1) To know the prevalence of malnourishment and high values of arterial blood pressure in schoolchildren of Xochimilco county, Mexico. 2) To analyze the association of pre- and postnatal growth and the body mass with high values of blood pressure. It is a cross-sectional, observational and analytic study. During the elective year 2003-2004, 972 students of Xochimilco county was studied. The independent variables was age, sex, intrauterine and infant growth, body mass, body fat and socioeconomic status. It was assessed the relationship between the independent variables and the values of blood pressure by a logistic regression model. The indicators of intrauterine (birth weight and length) and infantile (head circumference and height-for-age index) growth were not associated with the high levels of systolic and diastolic blood pressure. After adjusted other variables, women had more risk to show high levels of systolic blood pressure, as the overweight children had more risk to show high blood pressure systolic and diastolic levels. In the students the overweight and obesity increase the probability to show high blood pressure values therefore it is necessary to implement programs to promote an adequate nutritional status. In this study was not observed empiric support to the Barker hypothesis according to the intrauterine and infantile growth could have negative effects in the blood pressure levels.

SEGY to ASCII: Conversion and Plotting Program

USGS Publications Warehouse

Goldman, Mark R.

1999-01-01

This report documents a computer program to convert standard 4 byte, IBM floating point SEGY files to ASCII xyz format. The program then optionally plots the seismic data using the GMT plotting package. The material for this publication is contained in a standard tar file (of99-126.tar) that is uncompressed and 726 K in size. It can be downloaded by any Unix machine. Move the tar file to the directory you wish to use it in, then type 'tar xvf of99-126.tar' The archive files (and diskette) contain a NOTE file, a README file, a version-history file, source code, a makefile for easy compilation, and an ASCII version of the documentation. The archive files (and diskette) also contain example test files, including a typical SEGY file along with the resulting ASCII xyz and postscript files. Requirements for compiling the source code into an executable are a C++ compiler. The program has been successfully compiled using Gnu's g++ version 2.8.1, and use of other compilers may require modifications to the existing source code. The g++ compiler is a free, high quality C++ compiler and may be downloaded from the ftp site: ftp://ftp.gnu.org/gnu Requirements for plotting the seismic data is the existence of the GMT plotting package. The GMT plotting package may be downloaded from the web site: http://www.soest.hawaii.edu/gmt/

True versus perturbed forest inventory plot locations for modeling: a simulation study

Treesearch

John W. Coulston; Kurt H. Riitters; Ronald E. McRoberts; William D. Smith

2006-01-01

USDA Forest Service Forest Inventory and Analysis plot information is widely used for timber inventories, forest health assessments, and environmental risk analyses. With few exceptions, true plot locations are not revealed; the plot coordinates are manipulated to obscure the location of field plots and thereby preserve plot integrity. The influence of perturbed plot...

Texas-Mexico multimodal transportation: developments in Mexico

NASA Astrophysics Data System (ADS)

Boske, Leigh B.

1994-03-01

This presentation highlights the results of a recently completed study that examines the Texas- Mexico multimodal transport system already in place, current plans for improvements or expansion, and opportunities and constraints faced by each transport mode -- motor carriage, rail, maritime, and air. Particular emphasis is given to findings regarding transportation developments in Mexico. The study concludes that in Mexico, all modes are working at establishing new services and strategic alliances, intermodal arrangements are on the rise, and private-sector participation in infrastructure improvements is growing daily at Mexican seaports and airports as well as within that nation's highway and rail systems. This presentation looks at developments that concern privatization, deregulation, infrastructure improvements, financing arrangements, and new services in Mexico.

FLOWCHART; a computer program for plotting flowcharts

USGS Publications Warehouse

Bender, Bernice

1982-01-01

The computer program FLOWCHART can be used to very quickly and easily produce flowcharts of high quality for publication. FLOWCHART centers each element or block of text that it processes on one of a set of (imaginary) vertical lines. It can enclose a text block in a rectangle, circle or other selected figure. It can draw a 'line connecting the midpoint of any side of any figure with the midpoint of any side of any other figure and insert an arrow pointing in the direction of flow. It can write 'yes' or 'no' next to the line joining two figures. FLOWCHART creates flowcharts using some basic plotting subroutine* which permit plots to be generated interactively and inspected on a Tektronix compatible graphics screen or plotted in a deferred mode on a Houston Instruments 42' pen plotter. The size of the plot, character set and character height in inches are inputs to the program. Plots generated using the pen plotter can be up to 42' high--the larger size plots being directly usable as visual aids in a talk. FLOWCHART centers each block of text on an imaginary column line. (The number of columns and column width are specified as input.) The midpoint of the longest line of text within the block is defined to be the center of the block and is placed on the column line. The spacing of individual words within the block is not altered when the block is positioned. The program writes the first block of text in a designated column and continues placing each subsequent block below the previous block in the same column. A block of text may be placed in a different column by specifying the number of the column and an earlier block of text with which the new block is to be aligned. If block zero is given as the earlier block, the new text is placed in the new column continuing down the page below the previous block. Optionally a column and number of inches from the top of the page may be given for positioning the next block of text. The program will normally draw one of five

Workplace statistical literacy for teachers: interpreting box plots

NASA Astrophysics Data System (ADS)

Pierce, Robyn; Chick, Helen

2013-06-01

As a consequence of the increased use of data in workplace environments, there is a need to understand the demands that are placed on users to make sense of such data. In education, teachers are being increasingly expected to interpret and apply complex data about student and school performance, and, yet it is not clear that they always have the appropriate knowledge and experience to interpret the graphs, tables and other data that they receive. This study examined the statistical literacy demands placed on teachers, with a particular focus on box plot representations. Although box plots summarise the data in a way that makes visual comparisons possible across sets of data, this study showed that teachers do not always have the necessary fluency with the representation to describe correctly how the data are distributed in the representation. In particular, a significant number perceived the size of the regions of the box plot to be depicting frequencies rather than density, and there were misconceptions associated with outlying data that were not displayed on the plot. As well, teachers' perceptions of box plots were found to relate to three themes: attitudes, perceived value and misconceptions.

Measurement of surface water runoff from plots of two different sizes

NASA Astrophysics Data System (ADS)

Joel, Abraham; Messing, Ingmar; Seguel, Oscar; Casanova, Manuel

2002-05-01

Intensities and amounts of water infiltration and runoff on sloping land are governed by the rainfall pattern and soil hydraulic conductivity, as well as by the microtopography and soil surface conditions. These components are closely interrelated and occur simultaneously, and their particular contribution may change during a rainfall event, or their effects may vary at different field scales. The scale effect on the process of infiltration/runoff was studied under natural field and rainfall conditions for two plot sizes: small plots of 0·25 m2 and large plots of 50 m2. The measurements were carried out in the central region of Chile in a piedmont most recently used as natural pastureland. Three blocks, each having one large plot and five small plots, were established. Cumulative rainfall and runoff quantities were sampled every 5 min. Significant variations in runoff responses to rainfall rates were found for the two plot sizes. On average, large plots yielded only 40% of runoff quantities produced on small plots per unit area. This difference between plot sizes was observed even during periods of continuous runoff.

Dalitz plot distributions in presence of triangle singularities

DOE PAGES

Szczepaniak, Adam P.

2016-03-25

We discuss properties of three-particle Dalitz distributions in coupled channel systems in presence of triangle singularities. The single channel case was discussed long ago where it was found that as a consequence of unitarity, effects of a triangle singularity seen in the Dalitz plot are not seen in Dalitz plot projections. In the coupled channel case we find the same is true for the sum of intensities of all interacting channels. As a result, unlike the single channel case, however, triangle singularities do remain visible in Dalitz plot projections of individual channels.

Dalitz plot distributions in presence of triangle singularities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szczepaniak, Adam P.

We discuss properties of three-particle Dalitz distributions in coupled channel systems in presence of triangle singularities. The single channel case was discussed long ago where it was found that as a consequence of unitarity, effects of a triangle singularity seen in the Dalitz plot are not seen in Dalitz plot projections. In the coupled channel case we find the same is true for the sum of intensities of all interacting channels. As a result, unlike the single channel case, however, triangle singularities do remain visible in Dalitz plot projections of individual channels.

Inside the Outbreak of the 2009 Influenza A (H1N1)v Virus in Mexico

PubMed Central

Zepeda-Lopez, Hector M.; Perea-Araujo, Lizbeth; Miliar-García, Angel; Dominguez-López, Aarón; Xoconostle-Cázarez, Beatriz; Lara-Padilla, Eleazar; Ramírez Hernandez, Jorge A.; Sevilla-Reyes, Edgar; Orozco, Maria Esther; Ahued-Ortega, Armando; Villaseñor-Ruiz, Ignacio; Garcia-Cavazos, Ricardo J.; Teran, Luis M.

2010-01-01

Background Influenza viruses pose a threat to human health because of their potential to cause global disease. Between mid March and mid April a pandemic influenza A virus emerged in Mexico. This report details 202 cases of infection of humans with the 2009 influenza A virus (H1N1)v which occurred in Mexico City as well as the spread of the virus throughout the entire country. Methodology and Findings From May 1st to May 5th nasopharyngeal swabs, derived from 751 patients, were collected at 220 outpatient clinics and 28 hospitals distributed throughout Mexico City. Analysis of samples using real time RT-PCR revealed that 202 patients out of the 751 subjects (26.9%) were confirmed to be infected with the new virus. All confirmed cases of human infection with the strain influenza (H1N1)v suffered respiratory symptoms. The greatest number of confirmed cases during the outbreak of the 2009 influenza A (H1N1)v were seen in neighbourhoods on the northeast side of Mexico City including Iztapalapa, Gustavo A. Madero, Iztacalco, and Tlahuac which are the most populated areas in Mexico City. Using these data, together with data reported by the Mexican Secretariat of Health (MSH) to date, we plot the course of influenza (H1N1)v activity throughout Mexico. Conclusions Our data, which is backed up by MSH data, show that the greatest numbers of the 2009 influenza A (H1N1) cases were seen in the most populated areas. We speculate on conditions in Mexico which may have sparked this flu pandemic, the first in 41 years. We accept the hypothesis that high population density and a mass gathering which took in Iztapalapa contributed to the rapid spread of the disease which developed in three peaks of activity throughout the Country. PMID:20949040

Air Data - Tile Plot

EPA Pesticide Factsheets

This tool plots daily AQI values for a specific location and time period. Each square or “tile” represents one day of the year and is color-coded based on the AQI level for that day. The legend tallies the number of days in each AQI category.

The quartile benefit plot: a middle ear surgery benefit assessment scheme.

PubMed

Schmerber, Sébastien; Karkas, Alexandre; Righini, Christian A; Chahine, Karim A

2008-05-01

The purpose of this study is to present a new method for the assessment of hearing improvement following stapes surgery, taking into account additional, previously omitted evaluation criteria. Retrospective. A quartile plot, based on the currently used Glasgow benefit plot, is structured to include two additional criteria of hearing assessment, namely the absence of postoperative sensorineural hearing loss and the closure of the air-bone gap to <10 dB. Pre- and postoperative hearing results of 132 patients diagnosed with bilateral otosclerosis and treated with bilateral stapes surgery were plotted on both the classical Glasgow benefit plot and the new quartile benefit plot. The difference in success assessment due to stricter assessment criteria is demonstrated. Functional success rate following bilateral stapes surgery as plotted on the traditional Glasgow benefit plot was 51.5%. Success rate for bilateral stapes surgery assessed on the new quartile plot with the addition of the two new criteria was 38.64%. The difference in success rates was found to be statistically significant. The basis of benefit assessment in stapes surgery solely on the mean deficit in air conduction results in overestimation of success rate. This study demonstrates that results that appear satisfactory when judged by the Glasgow benefit plot are of modest success when assessed by the new quartile plot. The quartile benefit plot presented in this paper provides a strict measure of presentation and evaluation of stapes surgery results.

The Plotting Library http://astroplotlib.stsci.edu

NASA Astrophysics Data System (ADS)

Úbeda, L.

2014-05-01

astroplotlib is a multi-language astronomical library of plots. It is a collection of software templates that are useful to create paper-quality figures. All current templates are coded in IDL, some in Python and Mathematica. This free resource supported at Space Telescope Science Institute allows users to download any plot and customize it to their own needs. It is also intended as an educational tool.

PLOT3D Export Tool for Tecplot

NASA Technical Reports Server (NTRS)

Alter, Stephen

2010-01-01

The PLOT3D export tool for Tecplot solves the problem of modified data being impossible to output for use by another computational science solver. The PLOT3D Exporter add-on enables the use of the most commonly available visualization tools to engineers for output of a standard format. The exportation of PLOT3D data from Tecplot has far reaching effects because it allows for grid and solution manipulation within a graphical user interface (GUI) that is easily customized with macro language-based and user-developed GUIs. The add-on also enables the use of Tecplot as an interpolation tool for solution conversion between different grids of different types. This one add-on enhances the functionality of Tecplot so significantly, it offers the ability to incorporate Tecplot into a general suite of tools for computational science applications as a 3D graphics engine for visualization of all data. Within the PLOT3D Export Add-on are several functions that enhance the operations and effectiveness of the add-on. Unlike Tecplot output functions, the PLOT3D Export Add-on enables the use of the zone selection dialog in Tecplot to choose which zones are to be written by offering three distinct options - output of active, inactive, or all zones (grid blocks). As the user modifies the zones to output with the zone selection dialog, the zones to be written are similarly updated. This enables the use of Tecplot to create multiple configurations of a geometry being analyzed. For example, if an aircraft is loaded with multiple deflections of flaps, by activating and deactivating different zones for a specific flap setting, new specific configurations of that aircraft can be easily generated by only writing out specific zones. Thus, if ten flap settings are loaded into Tecplot, the PLOT3D Export software can output ten different configurations, one for each flap setting.

Realtime multi-plot graphics system

NASA Technical Reports Server (NTRS)

Shipkowski, Michael S.

1990-01-01

The increased complexity of test operations and customer requirements at Langley Research Center's National Transonic Facility (NTF) surpassed the capabilities of the initial realtime graphics system. The analysis of existing hardware and software and the enhancements made to develop a new realtime graphics system are described. The result of this effort is a cost effective system, based on hardware already in place, that support high speed, high resolution, generation and display of multiple realtime plots. The enhanced graphics system (EGS) meets the current and foreseeable future realtime graphics requirements of the NTF. While this system was developed to support wind tunnel operations, the overall design and capability of the system is applicable to other realtime data acquisition systems that have realtime plot requirements.

PETRO.CALC.PLOT, Microsoft Excel macros to aid petrologic interpretation

USGS Publications Warehouse

Sidder, G.B.

1994-01-01

PETRO.CALC.PLOT is a package of macros which normalizes whole-rock oxide data to 100%, calculates the cation percentages and molecular proportions used for normative mineral calculations, computes the apices for ternary diagrams, determines sums and ratios of specific elements of petrologic interest, and plots 33 X-Y graphs and five ternary diagrams. PETRO.CALC.PLOT also may be used to create other diagrams as desired by the user. The macros run in Microsoft Excel 3.0 and 4.0 for Macintosh computers and in Microsoft Excel 3.0 and 4.0 for Windows. Macros provided in PETRO.CALC.PLOT minimize repetition and time required to recalculate and plot whole-rock oxide data for petrologic analysis. ?? 1994.

Instrumentation for full-year plot-scale runoff monitoring

USDA-ARS?s Scientific Manuscript database

Replicated 0.34 ha cropping systems plots have been in place since 1991 at the USDA-ARS Goodwater Creek Experimental Watershed in central Missouri. Recently, instrumentation has been installed at 18 of those plots for continuous runoff water quality and quantity monitoring. That installation require...

Plotting and Analyzing Data Trends in Ternary Diagrams Made Easy

NASA Astrophysics Data System (ADS)

John, Cédric M.

2004-04-01

Ternary plots are used in many fields of science to characterize a system based on three components. Triangular plotting is thus useful to a broad audience in the Earth sciences and beyond. Unfortunately, it is typically the most expensive commercial software packages that offer the option to plot data in ternary diagrams, and they lack features that are paramount to the geosciences, such as the ability to plot data directly into a standardized diagram and the possibility to analyze temporal and stratigraphic trends within this diagram. To address these issues, δPlot was developed with a strong emphasis on ease of use, community orientation, and availability free of charges. This ``freeware'' supports a fully graphical user interface where data can be imported as text files, or by copying and pasting. A plot is automatically generated, and any standard diagram can be selected for plotting in the background using a simple pull-down menu. Standard diagrams are stored in an external database of PDF files that currently holds some 30 diagrams that deal with different fields of the Earth sciences. Using any drawing software supporting PDF, one can easily produce new standard diagrams to be used with δPlot by simply adding them to the library folder. An independent column of values, commonly stratigraphic depths or ages, can be used to sort the data sets.

Digital data from the Questa-San Luis and Santa Fe East helicopter magnetic surveys in Santa Fe and Taos Counties, New Mexico, and Costilla County, Colorado

USGS Publications Warehouse

Bankey, Viki; Grauch, V.J.S.; Drenth, B.J.; ,

2006-01-01

This report contains digital data, image files, and text files describing data formats and survey procedures for aeromagnetic data collected during high-resolution aeromagnetic surveys in southern Colorado and northern New Mexico in December, 2005. One survey covers the eastern edge of the San Luis basin, including the towns of Questa, New Mexico and San Luis, Colorado. A second survey covers the mountain front east of Santa Fe, New Mexico, including the town of Chimayo and portions of the Pueblos of Tesuque and Nambe. Several derivative products from these data are also presented as grids and images, including reduced-to-pole data and data continued to a reference surface. Images are presented in various formats and are intended to be used as input to geographic information systems, standard graphics software, or map plotting packages.

Import Manipulate Plot RELAP5/MOD3 Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, K. R.

1999-10-05

XMGR5 was derived from an XY plotting tool called ACE/gr, which is copyrighted by Paul J. Turner and in the public domain. The interactive version of ACE/GR is xmgr, and includes a graphical interface to the X-windows system. Enhancements to xmgr have been developed which import, manipualate, and plot data from RELAP/MOD3, MELCOR, FRAPCON, and SINDA codes, and NRC databank files. capabilities, include two-phase property table lookup functions, an equation interpreter, arithmetic library functions, and units conversion. Plot titles, labels, legends, and narrative can be displayed using Latin or Cyrillic alphabets.

Detection of Fracture Patterns Within the Southern Portion of a Residential Complex (Tepozanes), Los Reyes-La Paz County (Edo. de Mexico)

NASA Astrophysics Data System (ADS)

Chavez, R. E.; Arango, C.; Tejero, A.; Cifuentes, G.; Hernandez, E.

2008-12-01

Most of the urban zone within the Valley of Mexico is built on top of the sediments of the ancient lakes of Chalco, Xochimilco, Mexico, Texcoco, Xaltocan and Zumpango. The sediments that cover this great valley are mainly composed by highly saturated clay-sandy materials; which offer a weak resistance to the constructions built on top. In addition, the increasing need of water supply for the population living in the valley (~22 million inhabitants) has weakened the main groundwater aquifers. This has lead to a differentiated subsidence and collapse of buildings, habitation units and roads. These effects put in a serious risk the inhabitants and the infrastructure of the city. As an example, we present a case of an area located in a densely populated zone, within a low-income residential complex denominated Tepozanes. This is located in the Los Reyes-La Paz County (Mexico State), towards the southeastern portion of the Valley of Mexico. The area is geologically limited by the Chimalhuacan Hill to the N, by the Santa Catarina volcanic range to the S. The previously mentioned effects are evident in the constructions of some buildings, where an exposed fracture is found in the NE-SW direction. This feature is affecting the structure of one of them in the residential complex, where the fracture runs underneath. A geophysical study was proposed to characterize the subsoil and to define the fracturing patterns in the zone. The electrical resistivity tomography (ETR) method employing the capacitive and galvanic modes was used to define the fracturing patters and the position at depth of the saturated layers, which might affect the Residential buildings. As a complement, GPR (Ground Penetrating Radar) profiles were carried out on the same profiles to correlate the information obtained from the ETR capacitive method which has a better resolution in the shallower zone. The computed results show that the buildings foundations were set on top of a high resistivity layer (~1000

Slope Stability of Geosynthetic Clay Liner Test Plots

EPA Science Inventory

Fourteen full-scale field test plots containing five types of geosynthetic clay liners (GCLs) were constructed on 2H:IV and 3H:IV slopes for the purpose of assessing slope stability. The test plots were designed to simulate typical final cover systems for landfill. Slides occurr...

FORTRAN plotting subroutines for the space plasma laboratory

NASA Technical Reports Server (NTRS)

Williams, R.

1983-01-01

The computer program known as PLOTRW was custom made to satisfy some of the graphics requirements for the data collected in the Space Plasma Laboratory at the Johnson Space Center (JSC). The general requirements for the program were as follows: (1) all subroutines shall be callable through a FORTRAN source program; (2) all graphs shall fill one page and be properly labeled; (3) there shall be options for linear axes and logarithmic axes; (4) each axis shall have tick marks equally spaced with numeric values printed at the beginning tick mark and at the last tick mark; and (5) there shall be three options for plotting. These are: (1) point plot, (2) line plot and (3) point-line plot. The subroutines were written in FORTRAN IV for the LSI-11 Digital equipment Corporation (DEC) Computer. The program is now operational and can be run on any TEKTRONICX graphics terminal that uses a DEC Real-Time-11 (RT-11) operating system.

Possibility of using NURBS for surface plotting by survey data

NASA Astrophysics Data System (ADS)

Pravdina, E. A.; Lepikhina, O. J.

2018-05-01

Different methods of surface plotting were discussed in this article. Constructing the surface with the help of the Delaunay triangulation algorithm is described. The TIN-surfaces (triangles irregular net) method is used in the entire CAD software. This type of surfaces is plotting by results of laser scanning and stadia surveying. Possibility of using spline surfaces (NURBS) for surface plotting is studied. For a defined number of points by Mathcad software, the curvilinear function that described two-dimensional spline surfaces was calculated and plotted.

User manual for two simple postscript output FORTRAN plotting routines

NASA Technical Reports Server (NTRS)

Nguyen, T. X.

1991-01-01

Graphics is one of the important tools in engineering analysis and design. However, plotting routines that generate output on high quality laser printers normally come in graphics packages, which tend to be expensive and system dependent. These factors become important for small computer systems or desktop computers, especially when only some form of a simple plotting routine is sufficient. With the Postscript language becoming popular, there are more and more Postscript laser printers now available. Simple, versatile, low cost plotting routines that can generate output on high quality laser printers are needed and standard FORTRAN language plotting routines using output in Postscript language seems logical. The purpose here is to explain two simple FORTRAN plotting routines that generate output in Postscript language.

Mineral Plot from Esperance Target

NASA Image and Video Library

2014-01-23

This plot segregates various minerals examined by NASA Mars Exploration Rover Opportunity according to their different compositions; for example, those with more iron and magnesium oxides are located in the lower right corner.

Establishment of monitoring plots and evaluation of trees injured by ozone

Treesearch

Daniel Duriscoe; Kenneth Stolte; John Pronos

1996-01-01

By establishing long–term monitoring plots, it is possible to record environmental and biological conditions of the plot and individual trees, evaluate the condition of crowns of trees in the plot, and determine the extent of ozone injury to western conifers. This chapter recommends various methods for recording data and selecting plots, and provides information for...

Simplified plotting package for the LSI-11 computer and Tektronix terminals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henline, P.

1980-12-01

These plotting subroutines were written to allow the user to do plotting easily and quickly, but do not contain many fancy features in order to minimize memory space. Plots are produced of real values only. The first element of the plotting array contains the number of points to plot and the values to plot are stored in the remaining array locations. The maximum number of points which can be plotted is 300. The user must provide titles and other alpha numeric information. This can be done easily by a call to LOCATE, then ALPHA, and then doing a FORTRAN write.more » LOCATE and ALPHA are part of the Oak Ridge TEK11 Graphics Package. All plots are framed and labeled. The X axis has ten tick marks and three labels (left, center, and right side) and the Y axis has three tick marks and three labels. The subroutines assume the user is smart. Curves (especially when more than one is drawn on one plot) are assumed to be completely within the defined area as no clipping or dark lines are drawn. The user has the ability to do multiple curves on one graph or multiple graphs on a page.« less

A Study of the Magnetic Fingerprint of Tsunami Induced Deposits in the Ixtapa-Zihuatanejo Area (Western Mexico)

NASA Astrophysics Data System (ADS)

Goguitchaichrili, A.; Ramirez-Herrera, M.; Calvo-Rathert, M.; Aguilar, B.; Carrancho, Alonso; Morales, J.; Caballero, C. I.; Bautista, F.

2013-05-01

The Pacific coast of Mexico has repeatedly been exposed to destructive tsunamis. Recent studies have shown that rock-magnetic methods can be a promising approach for identification of tsunami or storm induced deposits. We present new rock-magnetic and anisotropy of magnetic susceptibility results to try to distinguish tsunami deposits in the Ixtapa-Zihuatanejo area (Western Mexico). The sampled, 80 cm deep sequence is characterised by the presence of two anomalous sand beds within fine-grained coastal deposits. The first lower lying sand bed is probably associated with the 14th March 1979 Petatlán earthquake (MW = 7.6) while the second one was originated by the September 21st 1985 Mexico earthquake (MW = 8.1). Rock magnetic experiments have shown significant variations within the analysed sequence. Thermomagnetic curves reveal two types of behaviour: In the upper part of the sequence, after the occurrence of the first tsunami and in the lower part of the sequence, during that event and below. Analysis of hysteresis parameter ratios in a Day-plot also allows distinguishing two kinds of behaviour. The samples associated to the second tsunami plot in the PSD area, while specimens associated to the first tsunami and the time between both tsunamis display a very different trend which can be ascribed to the production of a considerable amount of superparamagnetic grains which might be due to pedogenic processes after the first tsunami. The studied profile is characterised by a sedimentary fabric with almost vertical minimum principal susceptibilities. The maximum susceptibility axis shows a declination angle D = 27, suggesting a NNE flow direction which is equal for both tsunamis and normal currents. The standard AMS parameters display a significant enhancement within the transitional zone between both tsunamis. The study of rock-magnetic parameters may represent a useful tool for the identification and understanding of tsunami deposits.

Intelligence Constraints on Terrorist Network Plots

NASA Astrophysics Data System (ADS)

Woo, Gordon

Since 9/11, the western intelligence and law enforcement services have managed to interdict the great majority of planned attacks against their home countries. Network analysis shows that there are important intelligence constraints on the number and complexity of terrorist plots. If two many terrorists are involved in plots at a given time, a tipping point is reached whereby it becomes progressively easier for the dots to be joined and for the conspirators to be arrested, and for the aggregate evidence to secure convictions. Implications of this analysis are presented for the campaign to win hearts and minds.

Advanced Bode Plot Techniques for Ultrasonic Transducers

NASA Astrophysics Data System (ADS)

DeAngelis, D. A.; Schulze, G. W.

The Bode plot, displayed as either impedance or admittance versus frequency, is the most basic test used by ultrasonic transducer designers. With simplicity and ease-of-use, Bode plots are ideal for baseline comparisons such as spacing of parasitic modes or impedance, but quite often the subtleties that manifest as poor process control are hard to interpret or are nonexistence. In-process testing of transducers is time consuming for quantifying statistical aberrations, and assessments made indirectly via the workpiece are difficult. This research investigates the use of advanced Bode plot techniques to compare ultrasonic transducers with known "good" and known "bad" process performance, with the goal of a-priori process assessment. These advanced techniques expand from the basic constant voltage versus frequency sweep to include constant current and constant velocity interrogated locally on transducer or tool; they also include up and down directional frequency sweeps to quantify hysteresis effects like jumping and dropping phenomena. The investigation focuses solely on the common PZT8 piezoelectric material used with welding transducers for semiconductor wire bonding. Several metrics are investigated such as impedance, displacement/current gain, velocity/current gain, displacement/voltage gain and velocity/voltage gain. The experimental and theoretical research methods include Bode plots, admittance loops, laser vibrometry and coupled-field finite element analysis.

On-plot drinking water supplies and health: A systematic review.

PubMed

Overbo, Alycia; Williams, Ashley R; Evans, Barbara; Hunter, Paul R; Bartram, Jamie

2016-07-01

Many studies have found that household access to water supplies near or within the household plot can reduce the probability of diarrhea, trachoma, and other water-related diseases, and it is generally accepted that on-plot water supplies produce health benefits for households. However, the body of research literature has not been analyzed to weigh the evidence supporting this. A systematic review was conducted to investigate the impacts of on-plot water supplies on diarrhea, trachoma, child growth, and water-related diseases, to further examine the relationship between household health and distance to water source and to assess whether on-plot water supplies generate health gains for households. Studies provide evidence that households with on-plot water supplies experience fewer diarrheal and helminth infections and greater child height. Findings suggest that water-washed (hygiene associated) diseases are more strongly impacted by on-plot water access than waterborne diseases. Few studies analyzed the effects of on-plot water access on quantity of domestic water used, hygiene behavior, and use of multiple water sources, and the lack of evidence for these relationships reveals an important gap in current literature. The review findings indicate that on-plot water access is a useful health indicator and benchmark for the progressive realization of the Sustainable Development Goal target of universal safe water access as well as the human right to safe water. Copyright © 2016 Elsevier GmbH. All rights reserved.

Effect of crude extracts from cyanobacterial blooms in Lake Texcoco (Mexico) on the population growth of Brachionus calyciflorus (Rotifera).

PubMed

Barrios, Cesar Alejandro Zamora; Nandini, S; Sarma, S S S

2017-12-01

Unlike temperate regions, tropical ecosystems are characterized by high temperatures (>18 °C) all year, promoting blooms of cyanobacteria which often produce secondary metabolites toxic to zooplankton. Nabor Carillo and the Recreational Lake are part of the saline, Lake Texcoco, in Central Mexico which is filled nowadays with treated waste water. Both water bodies are dominated by Planktothrix, Anabaenopsis, Spirulina and Microcystis. In this study we present the concentration of microcystins in these waterbodies over an annual cycle. We also evaluated the chronic effects of cyanobacterial crude extracts from both lakes on two clones of the rotifer Brachionus calyciflorus, one from Nabor Carrillo Lake and the other from a canal in the shallow, Lake Xochimilco. The experiments on population growth were performed, beginning with 10 individuals per container for each of the following treatments: control (no crude extract), concentrated crude extract, and diluted crude extract (50:50) with moderately hard water and Chlorella vulgaris in a concentration of 0.5 × 10 6  cells ml -1 . The cyanotoxin levels were measured using an ELISA test and ranged between 0.20 and 2.4 μg L -1 in the lake water. The results showed that the Recreational Lake extracts were more toxic, killing the rotifers in less than five days. The r values ranged from -1.74 to 0.48 in the presence of the crude extracts and 0.16 and 0.24 in the controls. The results have been discussed with emphasis on the importance of conducting regular studies to test ecotoxicological impacts of cyanobacterial blooms in tropical waters. Copyright © 2017 Elsevier Ltd. All rights reserved.

Iron status determination in pregnancy using the Thomas plot.

PubMed

Weyers, R; Coetzee, M J; Nel, M

2016-04-01

Physiological changes during pregnancy affect routine tests for iron deficiency. The reticulocyte haemoglobin equivalent (RET-He) and serum-soluble transferrin receptor (sTfR) assay are newer diagnostic parameters for the detection of iron deficiency, combined in the Thomas diagnostic plot. We used this plot to determine the iron status of pregnant women presenting for their first visit to an antenatal clinic in Bloemfontein, South Africa. Routine laboratory tests (serum ferritin, full blood count and C-reactive protein) and RET-He and sTfR were performed. The iron status was determined using the Thomas plot. For this study, 103 pregnant women were recruited. According to the Thomas plot, 72.8% of the participants had normal iron stores and erythropoiesis. Iron-deficient erythropoiesis was detected in 12.6%. A third of participants were anaemic. Serum ferritin showed excellent sensitivity but poor specificity for detecting depleted iron stores. HIV status had no influence on the iron status of the participants. Our findings reiterate that causes other than iron deficiency should be considered in anaemic individuals. When compared with the Thomas plot, a low serum ferritin is a sensitive but nonspecific indicator of iron deficiency. The Thomas plot may provide useful information to identify pregnant individuals in whom haematologic parameters indicate limited iron availability for erythropoiesis. © 2015 John Wiley & Sons Ltd.

FERMI/GLAST Integrated Trending and Plotting System Release 5.0

NASA Technical Reports Server (NTRS)

Ritter, Sheila; Brumer, Haim; Reitan, Denise

2012-01-01

An Integrated Trending and Plotting System (ITPS) is a trending, analysis, and plotting system used by space missions to determine performance and status of spacecraft and its instruments. ITPS supports several NASA mission operational control centers providing engineers, ground controllers, and scientists with access to the entire spacecraft telemetry data archive for the life of the mission, and includes a secure Web component for remote access. FERMI/GLAST ITPS Release 5.0 features include the option to display dates (yyyy/ddd) instead of orbit numbers along orbital Long-Term Trend (LTT) plot axis, the ability to save statistics from daily production plots as image files, and removal of redundant edit/create Input Definition File (IDF) screens. Other features are a fix to address invalid packet lengths, a change in naming convention of image files in order to use in script, the ability to save all ITPS plot images (from Windows or the Web) as GIF or PNG format, the ability to specify ymin and ymax on plots where previously only the desired range could be specified, Web interface capability to plot IDFs that contain out-oforder page and plot numbers, and a fix to change all default file names to show yyyydddhhmmss time stamps instead of hhmmssdddyyyy. A Web interface capability sorts files based on modification date (with newest one at top), and the statistics block can be displayed via a Web interface. Via the Web, users can graphically view the volume of telemetry data from each day contained in the ITPS archive in the Web digest. The ITPS could be also used in nonspace fields that need to plot data or trend data, including financial and banking systems, aviation and transportation systems, healthcare and educational systems, sales and marketing, and housing and construction.

Automatic Extraction of Small Spatial Plots from Geo-Registered UAS Imagery

NASA Astrophysics Data System (ADS)

Cherkauer, Keith; Hearst, Anthony

2015-04-01

Accurate extraction of spatial plots from high-resolution imagery acquired by Unmanned Aircraft Systems (UAS), is a prerequisite for accurate assessment of experimental plots in many geoscience fields. If the imagery is correctly geo-registered, then it may be possible to accurately extract plots from the imagery based on their map coordinates. To test this approach, a UAS was used to acquire visual imagery of 5 ha of soybean fields containing 6.0 m2 plots in a complex planting scheme. Sixteen artificial targets were setup in the fields before flights and different spatial configurations of 0 to 6 targets were used as Ground Control Points (GCPs) for geo-registration, resulting in a total of 175 geo-registered image mosaics with a broad range of geo-registration accuracies. Geo-registration accuracy was quantified based on the horizontal Root Mean Squared Error (RMSE) of targets used as checkpoints. Twenty test plots were extracted from the geo-registered imagery. Plot extraction accuracy was quantified based on the percentage of the desired plot area that was extracted. It was found that using 4 GCPs along the perimeter of the field minimized the horizontal RMSE and enabled a plot extraction accuracy of at least 70%, with a mean plot extraction accuracy of 92%. The methods developed are suitable for work in many fields where replicates across time and space are necessary to quantify variability.

Myth Structure and Media Fiction Plot: An Exploration.

ERIC Educational Resources Information Center

Harless, James D.

Based on the general research of Joseph Campbell in adventure plots from mythology, the author explores the simplified monomyth plots currently in frequent use in mass media programing. The close relationship of media fiction to mythic stories is established through the analysis of more than 25 stories resulting from media broadcasting. The media…

Water availability and usage on the New Mexico/Mexico border.

PubMed

Li, Yongmei; Arnold, Stephen D; Kozel, Charles; Forster-Cox, Sue

2005-10-01

New Mexico, one of four states on the U.S./Mexico border, is faced with a pressing concern--lack of water. Since the region is either arid or semiarid, it is chronically short of continually available surface-water resources. Groundwater resources are used beyond their capacity to be recharged, and most surface-water resources are used to the maximum. The quality of groundwater varies widely. As a result of nonpoint- and point-source contamination, as well as natural occurrence, water in some areas is too salty or has high levels of natural uranium, fluoride, or arsenic. To date, the New Mexico Environment Department (NMED) has recognized 1,400 cases of groundwater contamination, and 1,907 water supply wells have been affected (NMED, 2001a). Of approximate 4,000 miles of coninously flowing rivers and streams in New Mexico, 92 perent are affected by nonpoint sources of pollution (NMED, 2001b). Numerous critical water issues exist along the New Mexico/Mexico border as a result of the impending critical issue of water availability, usage, and quality, as well as the fast-growing population. Related public health problems along the New Mexico/Mexico border are indicative of the need for a holistic, concrete, and sustainable solution to meet water demands in New Mexico. In order to accomplish the goals an objectives of Border XXI, Healthy People 2010, and Heathy Border 2010, a comprehensive statewide water management plan is needed. Solutions to the water demands of the region will be addressed in a subsequent manuscript.

Comparing Mapped Plot Estimators

Treesearch

Paul C. Van Deusen

2006-01-01

Two alternative derivations of estimators for mean and variance from mapped plots are compared by considering the models that support the estimators and by simulation. It turns out that both models lead to the same estimator for the mean but lead to very different variance estimators. The variance estimators based on the least valid model assumptions are shown to...

[Comparative quality measurements part 3: funnel plots].

PubMed

Kottner, Jan; Lahmann, Nils

2014-02-01

Comparative quality measurements between organisations or institutions are common. Quality measures need to be standardised and risk adjusted. Random error must also be taken adequately into account. Rankings without consideration of the precision lead to flawed interpretations and enhances "gaming". Application of confidence intervals is one possibility to take chance variation into account. Funnel plots are modified control charts based on Statistical Process Control (SPC) theory. The quality measures are plotted against their sample size. Warning and control limits that are 2 or 3 standard deviations from the center line are added. With increasing group size the precision increases and so the control limits are forming a funnel. Data points within the control limits are considered to show common cause variation; data points outside special cause variation without the focus of spurious rankings. Funnel plots offer data based information about how to evaluate institutional performance within quality management contexts.

Permanent-plot procedures for silvicultural and yield research.

Treesearch

Robert O. Curtis; David D. Marshall

2005-01-01

This paper reviews purposes and procedures for establishing and maintaining permanent plots for silvicultural and yield research, sampling and plot design, common errors, and procedures for measuring and recording data. It is a revision and update of a 1983 publication. Although some details are specific to coastal Pacific Northwest conditions, most of the material is...

Polychromatic plots: graphical display of multidimensional data.

PubMed

Roederer, Mario; Moody, M Anthony

2008-09-01

Limitations of graphical displays as well as human perception make the presentation and analysis of multidimensional data challenging. Graphical display of information on paper or by current projectors is perforce limited to two dimensions; the encoding of information from other dimensions must be overloaded into the two physical dimensions. A number of alternative means of encoding this information have been implemented, such as offsetting data points at an angle (e.g., three-dimensional projections onto a two-dimensional surface) or generating derived parameters that are combinations of other variables (e.g., principal components). Here, we explore the use of color to encode additional dimensions of data. PolyChromatic Plots are standard dot plots, where the color of each event is defined by the values of one, two, or three of the measurements for that event. The measurements for these parameters are mapped onto an intensity value for each primary color (red, green, or blue) based on different functions. In addition, differential weighting of the priority with which overlapping events are displayed can be defined by these same measurements. PolyChromatic Plots can encode up to five independent dimensions of data in a single display. By altering the color mapping function and the priority function, very different displays that highlight or de-emphasize populations of events can be generated. As for standard black-and-white dot plots, frequency information can be significantly biased by this display; care must be taken to ensure appropriate interpretation of the displays. PolyChromatic Plots are a powerful display type that enables rapid data exploration. By virtue of encoding as many as five dimensions of data independently, an enormous amount of information can be gleaned from the displays. In many ways, the display performs somewhat like an unsupervised cluster algorithm, by highlighting events of similar distributions in multivariate space.

Mexico City, Mexico as seen from STS-62

NASA Technical Reports Server (NTRS)

1994-01-01

This image is the clearest photo of Mexico City, Mexico taken from U.S. Manned Spacecraft. North is to the upper right. Mexico City sits in a basin surrounded by large volcanoes. The restricted atmospheric circulation in the basin, coupled with the inevitable air emissions produced by a city of 20 million people has created a critical air pollution problem for the city. In most photographs of the region, Mexico City is obscured by haze. The clarity of the photograph allows many key cultural features to be identified, including all of the major boulevards, the horse track (western part of the city), the university (south of the city), and the museum areas. Large, man-made ponds east of the city also stand out.

Development of a GIFTS (Graphics-Oriented Interactive Finite-Element Time-Sharing System) Plotting Package Compatible with Either PLOT10 or IBM/DSM Graphics.

DTIC Science & Technology

1983-06-01

1D-A132 95 DEVELOPMENT OF A GIFTS (GRAPHICS ORIENTED INTERACTIVE i/i FINITE-ELEMENT TIME..(U) NAVAL POSTGRADUATE SCHOOL I MONTEREY CA T R PICKLES JUN...183 THESIS " DEVELOPMENT OF A GIFTS PLOTTING PACKAGE COMPATIBLE WITH EITHER PLOT10 OR IBM/DSM GRAPHICS by Thomas R. Pickles June 1983 Thesis Advisor: G...TYPEAFtWEPORT & PERIOD COVERED Development of GIFTS Plotting Package Bi ’s Thesis; Compatible with either PLOTl0 or June 1983 IBM/DSM Graphics 6. PERFORMING ORO

Compensating for missing plot observations inforest inventory estimation

Treesearch

Ronald E. McRoberts

2003-01-01

The Enhanced Forest Inventory and Analysis program of the U.S. Forest Service has established a nationwide array of permanent field plots, each representing approximately 2400 ha. Each plot has been assigned to one of five interpenetrating, nonoverlapping panels, with one panel selected for measurement on a rotating basis each year. As with most large surveys,...

The 2002 RPA Plot Summary database users manual

Treesearch

Patrick D. Miles; John S. Vissage; W. Brad Smith

2004-01-01

Describes the structure of the RPA 2002 Plot Summary database and provides information on generating estimates of forest statistics from these data. The RPA 2002 Plot Summary database provides a consistent framework for storing forest inventory data across all ownerships across the entire United States. The data represents the best available data as of October 2001....

Online plot services for paleomagnetism and rock magnetism

NASA Astrophysics Data System (ADS)

Hatakeyama, T.

2017-12-01

In paleomagnetism and rock magnetism, a lot of types of original plots are used for obtained data from measurements. Many researchers in paleomagnetism often use not only general-purpose plotting programs such as Microsoft Excel but also single-purpose tools. A large benefit of using the latter tools is that we can make a beautiful figure for our own data. However, those programs require specific environment for their operation such as type of hardware and platform, type of operation system and its version, libraries for execution and so on. Therefore, it is difficult to share the result and graphics among the collaborators who use different environments on their PCs. Thus, one of the best solution is likely a program operated on popular environment. The most popular is web environment as we all know. Almost all current operating systems have web browsers as standard and all people use them regularly. Now we provide a web-based service plotting paleomagnetic results easily.We develop original programs with a command-line user interface (non-GUI), and we prepared web pages for input of the simple measured data and options and a wrapper script which transfers the entered values to the program. The results, analyzed values and plotted graphs from the program are shown in the HTML page and downloadable. Our plot services are provided in http://mage-p.org/mageplot/. In this talk, we introduce our program and service and discuss the philosophy and efficiency of these services.

Parametric-Studies and Data-Plotting Modules for the SOAP

NASA Technical Reports Server (NTRS)

2008-01-01

"Parametric Studies" and "Data Table Plot View" are the names of software modules in the Satellite Orbit Analysis Program (SOAP). Parametric Studies enables parameterization of as many as three satellite or ground-station attributes across a range of values and computes the average, minimum, and maximum of a specified metric, the revisit time, or 21 other functions at each point in the parameter space. This computation produces a one-, two-, or three-dimensional table of data representing statistical results across the parameter space. Inasmuch as the output of a parametric study in three dimensions can be a very large data set, visualization is a paramount means of discovering trends in the data (see figure). Data Table Plot View enables visualization of the data table created by Parametric Studies or by another data source: this module quickly generates a display of the data in the form of a rotatable three-dimensional-appearing plot, making it unnecessary to load the SOAP output data into a separate plotting program. The rotatable three-dimensionalappearing plot makes it easy to determine which points in the parameter space are most desirable. Both modules provide intuitive user interfaces for ease of use.

Selection of Plot Remeasurement in an Annual Inventory

Treesearch

Mark H. Hansen; Hans T. Schreuder; Dave Heinzen

2000-01-01

A plot selection approach is proposed based on experience from the Annual Forest Inventory System (AFIS) in the Aspen-Birch Unit of northestern Minnesota. The emphasisis on a mixture of strategies. Although the Agricultural Act of 1998 requires that a fixed 20 percent of plots be measured each year in each state, sooner or later we will need to vary the scheme to...

Non-parametric and least squares Langley plot methods

NASA Astrophysics Data System (ADS)

Kiedron, P. W.; Michalsky, J. J.

2016-01-01

Langley plots are used to calibrate sun radiometers primarily for the measurement of the aerosol component of the atmosphere that attenuates (scatters and absorbs) incoming direct solar radiation. In principle, the calibration of a sun radiometer is a straightforward application of the Bouguer-Lambert-Beer law V = V0e-τ ṡ m, where a plot of ln(V) voltage vs. m air mass yields a straight line with intercept ln(V0). This ln(V0) subsequently can be used to solve for τ for any measurement of V and calculation of m. This calibration works well on some high mountain sites, but the application of the Langley plot calibration technique is more complicated at other, more interesting, locales. This paper is concerned with ferreting out calibrations at difficult sites and examining and comparing a number of conventional and non-conventional methods for obtaining successful Langley plots. The 11 techniques discussed indicate that both least squares and various non-parametric techniques produce satisfactory calibrations with no significant differences among them when the time series of ln(V0)'s are smoothed and interpolated with median and mean moving window filters.

Splatterplots: overcoming overdraw in scatter plots.

PubMed

Mayorga, Adrian; Gleicher, Michael

2013-09-01

We introduce Splatterplots, a novel presentation of scattered data that enables visualizations that scale beyond standard scatter plots. Traditional scatter plots suffer from overdraw (overlapping glyphs) as the number of points per unit area increases. Overdraw obscures outliers, hides data distributions, and makes the relationship among subgroups of the data difficult to discern. To address these issues, Splatterplots abstract away information such that the density of data shown in any unit of screen space is bounded, while allowing continuous zoom to reveal abstracted details. Abstraction automatically groups dense data points into contours and samples remaining points. We combine techniques for abstraction with perceptually based color blending to reveal the relationship between data subgroups. The resulting visualizations represent the dense regions of each subgroup of the data set as smooth closed shapes and show representative outliers explicitly. We present techniques that leverage the GPU for Splatterplot computation and rendering, enabling interaction with massive data sets. We show how Splatterplots can be an effective alternative to traditional methods of displaying scatter data communicating data trends, outliers, and data set relationships much like traditional scatter plots, but scaling to data sets of higher density and up to millions of points on the screen.

Splatterplots: Overcoming Overdraw in Scatter Plots

PubMed Central

Mayorga, Adrian; Gleicher, Michael

2014-01-01

We introduce Splatterplots, a novel presentation of scattered data that enables visualizations that scale beyond standard scatter plots. Traditional scatter plots suffer from overdraw (overlapping glyphs) as the number of points per unit area increases. Overdraw obscures outliers, hides data distributions, and makes the relationship among subgroups of the data difficult to discern. To address these issues, Splatterplots abstract away information such that the density of data shown in any unit of screen space is bounded, while allowing continuous zoom to reveal abstracted details. Abstraction automatically groups dense data points into contours and samples remaining points. We combine techniques for abstraction with with perceptually based color blending to reveal the relationship between data subgroups. The resulting visualizations represent the dense regions of each subgroup of the dataset as smooth closed shapes and show representative outliers explicitly. We present techniques that leverage the GPU for Splatterplot computation and rendering, enabling interaction with massive data sets. We show how splatterplots can be an effective alternative to traditional methods of displaying scatter data communicating data trends, outliers, and data set relationships much like traditional scatter plots, but scaling to data sets of higher density and up to millions of points on the screen. PMID:23846097

Splatterplots: Overcoming Overdraw in Scatter Plots.

PubMed

Mayorga, Adrian; Gleicher, Michael

2013-03-20

We introduce Splatterplots, a novel presentation of scattered data that enables visualizations that scale beyond standard scatter plots. Traditional scatter plots suffer from overdraw (overlapping glyphs) as the number of points per unit area increases. Overdraw obscures outliers, hides data distributions, and makes the relationship among subgroups of the data difficult to discern. To address these issues, Splatterplots abstract away information such that the density of data shown in any unit of screen space is bounded, while allowing continuous zoom to reveal abstracted details. Abstraction automatically groups dense data points into contours and samples remaining points. We combine techniques for abstraction with with perceptually based color blending to reveal the relationship between data subgroups. The resulting visualizations represent the dense regions of each subgroup of the dataset as smooth closed shapes and show representative outliers explicitly. We present techniques that leverage the GPU for Splatterplot computation and rendering, enabling interaction with massive data sets. We show how splatterplots can be an effective alternative to traditional methods of displaying scatter data communicating data trends, outliers, and data set relationships much like traditional scatter plots, but scaling to data sets of higher density and up to millions of points on the screen.

PLOT3D- DRAWING THREE DIMENSIONAL SURFACES

NASA Technical Reports Server (NTRS)

Canright, R. B.

1994-01-01

PLOT3D is a package of programs to draw three-dimensional surfaces of the form z = f(x,y). The function f and the boundary values for x and y are the input to PLOT3D. The surface thus defined may be drawn after arbitrary rotations. However, it is designed to draw only functions in rectangular coordinates expressed explicitly in the above form. It cannot, for example, draw a sphere. Output is by off-line incremental plotter or online microfilm recorder. This package, unlike other packages, will plot any function of the form z = f(x,y) and portrays continuous and bounded functions of two independent variables. With curve fitting; however, it can draw experimental data and pictures which cannot be expressed in the above form. The method used is division into a uniform rectangular grid of the given x and y ranges. The values of the supplied function at the grid points (x, y) are calculated and stored; this defines the surface. The surface is portrayed by connecting successive (y,z) points with straight-line segments for each x value on the grid and, in turn, connecting successive (x,z) points for each fixed y value on the grid. These lines are then projected by parallel projection onto the fixed yz-plane for plotting. This program has been implemented on the IBM 360/67 with on-line CDC microfilm recorder.

SpectraPlot.com: Integrated spectroscopic modeling of atomic and molecular gases

NASA Astrophysics Data System (ADS)

Goldenstein, Christopher S.; Miller, Victor A.; Mitchell Spearrin, R.; Strand, Christopher L.

2017-10-01

SpectraPlot is a web-based application for simulating spectra of atomic and molecular gases. At the time this manuscript was written, SpectraPlot consisted of four primary tools for calculating: (1) atomic and molecular absorption spectra, (2) atomic and molecular emission spectra, (3) transition linestrengths, and (4) blackbody emission spectra. These tools currently employ the NIST ASD, HITRAN2012, and HITEMP2010 databases to perform line-by-line simulations of spectra. SpectraPlot employs a modular, integrated architecture, enabling multiple simulations across multiple databases and/or thermodynamic conditions to be visualized in an interactive plot window. The primary objective of this paper is to describe the architecture and spectroscopic models employed by SpectraPlot in order to provide its users with the knowledge required to understand the capabilities and limitations of simulations performed using SpectraPlot. Further, this manuscript discusses the accuracy of several underlying approximations used to decrease computational time, in particular, the use of far-wing cutoff criteria.

Standardized mean differences cause funnel plot distortion in publication bias assessments.

PubMed

Zwetsloot, Peter-Paul; Van Der Naald, Mira; Sena, Emily S; Howells, David W; IntHout, Joanna; De Groot, Joris Ah; Chamuleau, Steven Aj; MacLeod, Malcolm R; Wever, Kimberley E

2017-09-08

Meta-analyses are increasingly used for synthesis of evidence from biomedical research, and often include an assessment of publication bias based on visual or analytical detection of asymmetry in funnel plots. We studied the influence of different normalisation approaches, sample size and intervention effects on funnel plot asymmetry, using empirical datasets and illustrative simulations. We found that funnel plots of the Standardized Mean Difference (SMD) plotted against the standard error (SE) are susceptible to distortion, leading to overestimation of the existence and extent of publication bias. Distortion was more severe when the primary studies had a small sample size and when an intervention effect was present. We show that using the Normalised Mean Difference measure as effect size (when possible), or plotting the SMD against a sample size-based precision estimate, are more reliable alternatives. We conclude that funnel plots using the SMD in combination with the SE are unsuitable for publication bias assessments and can lead to false-positive results.

Standardized mean differences cause funnel plot distortion in publication bias assessments

PubMed Central

Van Der Naald, Mira; Sena, Emily S; Howells, David W; IntHout, Joanna; De Groot, Joris AH; Chamuleau, Steven AJ; MacLeod, Malcolm R

2017-01-01

Meta-analyses are increasingly used for synthesis of evidence from biomedical research, and often include an assessment of publication bias based on visual or analytical detection of asymmetry in funnel plots. We studied the influence of different normalisation approaches, sample size and intervention effects on funnel plot asymmetry, using empirical datasets and illustrative simulations. We found that funnel plots of the Standardized Mean Difference (SMD) plotted against the standard error (SE) are susceptible to distortion, leading to overestimation of the existence and extent of publication bias. Distortion was more severe when the primary studies had a small sample size and when an intervention effect was present. We show that using the Normalised Mean Difference measure as effect size (when possible), or plotting the SMD against a sample size-based precision estimate, are more reliable alternatives. We conclude that funnel plots using the SMD in combination with the SE are unsuitable for publication bias assessments and can lead to false-positive results. PMID:28884685

Bridging scale gaps between regional maps of forest aboveground biomass and field sampling plots using TanDEM-X data

NASA Astrophysics Data System (ADS)

Ni, W.; Zhang, Z.; Sun, G.

2017-12-01

Several large-scale maps of forest AGB have been released [1] [2] [3]. However, these existing global or regional datasets were only approximations based on combining land cover type and representative values instead of measurements of actual forest aboveground biomass or forest heights [4]. Rodríguez-Veiga et al[5] reported obvious discrepancies of existing forest biomass stock maps with in-situ observations in Mexico. One of the biggest challenges to the credibility of these maps comes from the scale gaps between the size of field sampling plots used to develop(or validate) estimation models and the pixel size of these maps and the availability of field sampling plots with sufficient size for the verification of these products [6]. It is time-consuming and labor-intensive to collect sufficient number of field sampling data over the plot size of the same as resolutions of regional maps. The smaller field sampling plots cannot fully represent the spatial heterogeneity of forest stands as shown in Figure 1. Forest AGB is directly determined by forest heights, diameter at breast height (DBH) of each tree, forest density and tree species. What measured in the field sampling are the geometrical characteristics of forest stands including the DBH, tree heights and forest densities. The LiDAR data is considered as the best dataset for the estimation of forest AGB. The main reason is that LiDAR can directly capture geometrical features of forest stands by its range detection capabilities.The remotely sensed dataset, which is capable of direct measurements of forest spatial structures, may serve as a ladder to bridge the scale gaps between the pixel size of regional maps of forest AGB and field sampling plots. Several researches report that TanDEM-X data can be used to characterize the forest spatial structures [7, 8]. In this study, the forest AGB map of northeast China were produced using ALOS/PALSAR data taking TanDEM-X data as a bridges. The TanDEM-X InSAR data used in

Pilot Inventory of FIA plots traditionally called `nonforest'

Treesearch

Rachel Riemann

2003-01-01

Forest-inventory data were collected on plots defined as ?nonforest? by the USDA Forest Service?s Forest Inventory and Analysis (FIA) unit. Nonforest plots may have trees on them, but they do not fit FIA?s definition of forest because the area covered by trees is too small, too sparsely populated by trees, too narrow (e.g., trees between fields or in the middle of a...

Selection of plot remeasurement in an annual inventory

Treesearch

Mark H. Hansen; Hans T. Schreuder; Dave Heinzen

2000-01-01

A plot selection approach is proposed based on experience from the Annual Forest Inventory System (AFIS) in the Aspen-Birch Unit of northeastern Minnesota. The emphasis is on a mixture of strategies. Although the Agricultural Act of 1998 requires that a fixed 20 percent of plots be measured each year in each state, sooner or later we will need to vary the scheme to...

Organophosphorus pesticides effect on early stages of the axolotl Ambystoma mexicanum (Amphibia: Caudata).

PubMed

Robles-Mendoza, C; García-Basilio, C; Cram-Heydrich, S; Hernández-Quiroz, M; Vanegas-Pérez, C

2009-02-01

Ambystoma mexicanum is an endemic salamander of Xochimilco, a wetland of the basin of Mexico valley. Nowadays, axolotl populations are decreasing due environmental stressors. Particularly, studies about organophosphorus pesticides (OPPs; i.e. chlorpyrifos and malathion) toxicity are of great importance due to their intensive use in agricultural activities in Xochimilco. Thus, the aim of this study was to evaluate under controlled conditions the toxicity of chlorpyrifos (CPF) and malathion (MLT) on embryos and larvae (stage 44 and 54) of A. mexicanum. Embryos and larvae were exposure 96h from 0.5 to 3mg CPFL(-1) and from 10 to 30mg MLTL(-1) in independent tests. Embryos at the end of this period were maintained 9d without pesticide in order to identify possible recuperation. Differences obtained in mortality, hatching success, development, morphological abnormalities, behaviour and activity, suggest that toxicity of CPF and MLT differs in embryos and larval stages. Embryos were less sensitive to OPPs acute exposure than axolotl larvae; additionally, toxicity of CPF in larval stages was greater than MLT. On the other hand, data obtained in axolotl embryos during the period of recuperation to CPF in particular as delay and inhibition of development, malformations and success of hatching, indicated that these responses turned out more sensitive than mortality. This study allowed to identify the toxicological potential of OPPs on early developmental stages of A. mexicanum and it is a valuable contribution for the future management of the axolotl wild population.

From fuzzy recurrence plots to scalable recurrence networks of time series

NASA Astrophysics Data System (ADS)

Pham, Tuan D.

2017-04-01

Recurrence networks, which are derived from recurrence plots of nonlinear time series, enable the extraction of hidden features of complex dynamical systems. Because fuzzy recurrence plots are represented as grayscale images, this paper presents a variety of texture features that can be extracted from fuzzy recurrence plots. Based on the notion of fuzzy recurrence plots, defuzzified, undirected, and unweighted recurrence networks are introduced. Network measures can be computed for defuzzified recurrence networks that are scalable to meet the demand for the network-based analysis of big data.

"Delta Plots"--A New Way to Visualize Electronic Excitation.

ERIC Educational Resources Information Center

Morrison, Harry; And Others

1985-01-01

Presents procedures for obtaining and examples of delta plots (a way of illustrating electron density changes associated with electronic excitation). These plots are pedagogically useful for visualizing simple and complex transitions and provide a way of "seeing" the origin of highest occupied molecular orbital (HOMO)-dictated carbonyl…

Igloo-Plot: a tool for visualization of multidimensional datasets.

PubMed

Kuntal, Bhusan K; Ghosh, Tarini Shankar; Mande, Sharmila S

2014-01-01

Advances in science and technology have resulted in an exponential growth of multivariate (or multi-dimensional) datasets which are being generated from various research areas especially in the domain of biological sciences. Visualization and analysis of such data (with the objective of uncovering the hidden patterns therein) is an important and challenging task. We present a tool, called Igloo-Plot, for efficient visualization of multidimensional datasets. The tool addresses some of the key limitations of contemporary multivariate visualization and analysis tools. The visualization layout, not only facilitates an easy identification of clusters of data-points having similar feature compositions, but also the 'marker features' specific to each of these clusters. The applicability of the various functionalities implemented herein is demonstrated using several well studied multi-dimensional datasets. Igloo-Plot is expected to be a valuable resource for researchers working in multivariate data mining studies. Igloo-Plot is available for download from: http://metagenomics.atc.tcs.com/IglooPlot/. Copyright © 2014 Elsevier Inc. All rights reserved.

SEGY to ASCII Conversion and Plotting Program 2.0

USGS Publications Warehouse

Goldman, Mark R.

2005-01-01

INTRODUCTION SEGY has long been a standard format for storing seismic data and header information. Almost every seismic processing package can read and write seismic data in SEGY format. In the data processing world, however, ASCII format is the 'universal' standard format. Very few general-purpose plotting or computation programs will accept data in SEGY format. The software presented in this report, referred to as SEGY to ASCII (SAC), converts seismic data written in SEGY format (Barry et al., 1975) to an ASCII data file, and then creates a postscript file of the seismic data using a general plotting package (GMT, Wessel and Smith, 1995). The resulting postscript file may be plotted by any standard postscript plotting program. There are two versions of SAC: one version for plotting a SEGY file that contains a single gather, such as a stacked CDP or migrated section, and a second version for plotting multiple gathers from a SEGY file containing more than one gather, such as a collection of shot gathers. Note that if a SEGY file has multiple gathers, then each gather must have the same number of traces per gather, and each trace must have the same sample interval and number of samples per trace. SAC will read several common standards of SEGY data, including SEGY files with sample values written in either IBM or IEEE floating-point format. In addition, utility programs are present to convert non-standard Seismic Unix (.sux) SEGY files and PASSCAL (.rsy) SEGY files to standard SEGY files. SAC allows complete user control over all plotting parameters including label size and font, tick mark intervals, trace scaling, and the inclusion of a title and descriptive text. SAC shell scripts create a postscript image of the seismic data in vector rather than bitmap format, using GMT's pswiggle command. Although this can produce a very large postscript file, the image quality is generally superior to that of a bitmap image, and commercial programs such as Adobe Illustrator

Model-independent plot of dynamic PET data facilitates data interpretation and model selection.

PubMed

Munk, Ole Lajord

2012-02-21

When testing new PET radiotracers or new applications of existing tracers, the blood-tissue exchange and the metabolism need to be examined. However, conventional plots of measured time-activity curves from dynamic PET do not reveal the inherent kinetic information. A novel model-independent volume-influx plot (vi-plot) was developed and validated. The new vi-plot shows the time course of the instantaneous distribution volume and the instantaneous influx rate. The vi-plot visualises physiological information that facilitates model selection and it reveals when a quasi-steady state is reached, which is a prerequisite for the use of the graphical analyses by Logan and Gjedde-Patlak. Both axes of the vi-plot have direct physiological interpretation, and the plot shows kinetic parameter in close agreement with estimates obtained by non-linear kinetic modelling. The vi-plot is equally useful for analyses of PET data based on a plasma input function or a reference region input function. The vi-plot is a model-independent and informative plot for data exploration that facilitates the selection of an appropriate method for data analysis. Copyright © 2011 Elsevier Ltd. All rights reserved.

Volcano plots in analyzing differential expressions with mRNA microarrays.

PubMed

Li, Wentian

2012-12-01

A volcano plot displays unstandardized signal (e.g. log-fold-change) against noise-adjusted/standardized signal (e.g. t-statistic or -log(10)(p-value) from the t-test). We review the basic and interactive use of the volcano plot and its crucial role in understanding the regularized t-statistic. The joint filtering gene selection criterion based on regularized statistics has a curved discriminant line in the volcano plot, as compared to the two perpendicular lines for the "double filtering" criterion. This review attempts to provide a unifying framework for discussions on alternative measures of differential expression, improved methods for estimating variance, and visual display of a microarray analysis result. We also discuss the possibility of applying volcano plots to other fields beyond microarray.

Atrial fibrillation detection by heart rate variability in Poincare plot.

PubMed

Park, Jinho; Lee, Sangwook; Jeon, Moongu

2009-12-11

Atrial fibrillation (AFib) is one of the prominent causes of stroke, and its risk increases with age. We need to detect AFib correctly as early as possible to avoid medical disaster because it is likely to proceed into a more serious form in short time. If we can make a portable AFib monitoring system, it will be helpful to many old people because we cannot predict when a patient will have a spasm of AFib. We analyzed heart beat variability from inter-beat intervals obtained by a wavelet-based detector. We made a Poincare plot using the inter-beat intervals. By analyzing the plot, we extracted three feature measures characterizing AFib and non-AFib: the number of clusters, mean stepping increment of inter-beat intervals, and dispersion of the points around a diagonal line in the plot. We divided distribution of the number of clusters into two and calculated mean value of the lower part by k-means clustering method. We classified data whose number of clusters is more than one and less than this mean value as non-AFib data. In the other case, we tried to discriminate AFib from non-AFib using support vector machine with the other feature measures: the mean stepping increment and dispersion of the points in the Poincare plot. We found that Poincare plot from non-AFib data showed some pattern, while the plot from AFib data showed irregularly irregular shape. In case of non-AFib data, the definite pattern in the plot manifested itself with some limited number of clusters or closely packed one cluster. In case of AFib data, the number of clusters in the plot was one or too many. We evaluated the accuracy using leave-one-out cross-validation. Mean sensitivity and mean specificity were 91.4% and 92.9% respectively. Because pulse beats of ventricles are less likely to be influenced by baseline wandering and noise, we used the inter-beat intervals to diagnose AFib. We visually displayed regularity of the inter-beat intervals by way of Poincare plot. We tried to design an

46 CFR 15.816 - Automatic radar plotting aids (ARPAs).

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Automatic radar plotting aids (ARPAs). 15.816 Section 15.816 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY MERCHANT MARINE OFFICERS AND SEAMEN MANNING REQUIREMENTS Computations § 15.816 Automatic radar plotting aids (ARPAs). Every person in the required...

PLOT3D/AMES, SGI IRIS VERSION (WITHOUT TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

PLOT3D/AMES, SGI IRIS VERSION (WITH TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

SPRUCE Peat Physical and Chemical Characteristics from Experimental Plot Cores, 2012

DOE Data Explorer

Iversen, C. M. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.; Hanson, P. J. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.; Brice, D. J. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.; Phillips, J. R. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.; McFarlane, K. J. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.; Hobbie, E. A. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.; Kolka, R. K. [Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.

2012-01-01

This data set reports the results of physical and chemical analyses of peat core samples from the SPRUCE experimental study plots located in the S1-Bog. On August 13-15, 2012, a team of SPRUCE investigators and collaborators collected core samples of peat in the SPRUCE experimental plots. The goal was to characterize the biological, physical, and chemical characteristics of peat, and how those characteristics changed throughout the depth profile of the bog, prior to the initialization of the SPRUCE experimental warming and CO2 treatments. Cores were collected from 16 experimental plots; samples were collected from the hummock and hollow surfaces to depths of 200-300 cm in defined increments. Three replicate cores were collected from both hummock and hollow locations in each plot. The coring locations within each plot were mapped

Plotting Lightning-Stroke Data

NASA Technical Reports Server (NTRS)

Tatom, F. B.; Garst, R. A.

1986-01-01

Data on lightning-stroke locations become easier to correlate with cloudcover maps with aid of new graphical treatment. Geographic region divided by grid into array of cells. Number of lightning strokes in each cell tabulated, and value representing density of lightning strokes assigned to each cell. With contour-plotting routine, computer draws contours of lightning-stroke density for region. Shapes of contours compared directly with shapes of storm cells.

The Use of Crow-AMSAA Plots to Assess Mishap Trends

NASA Technical Reports Server (NTRS)

Dawson, Jeffrey W.

2011-01-01

Crow-AMSAA (CA) plots are used to model reliability growth. Use of CA plots has expanded into other areas, such as tracking events of interest to management, maintenance problems, and safety mishaps. Safety mishaps can often be successfully modeled using a Poisson probability distribution. CA plots show a Poisson process in log-log space. If the safety mishaps are a stable homogenous Poisson process, a linear fit to the points in a CA plot will have a slope of one. Slopes of greater than one indicate a nonhomogenous Poisson process, with increasing occurrence. Slopes of less than one indicate a nonhomogenous Poisson process, with decreasing occurrence. Changes in slope, known as "cusps," indicate a change in process, which could be an improvement or a degradation. After presenting the CA conceptual framework, examples are given of trending slips, trips and falls, and ergonomic incidents at NASA (from Agency-level data). Crow-AMSAA plotting is a robust tool for trending safety mishaps that can provide insight into safety performance over time.

Trichuriasis and low-iron status in schoolchildren from Northwest Mexico.

PubMed

Quihui-Cota, L; Morales-Figueroa, G G; Esparza-Romero, J; Valencia, M E; Astiazarán-García, H; Méndez, R O; Pacheco-Moreno, B I; Crompton, D W T; Diaz-Camacho, S P

2010-10-01

The aim of this study was to investigate the association between trichuriasis and iron status in rural schoolchildren from Northwest Mexico. A total of 73 schoolchildren (37 boys, 36 girls) between the ages of 6 and 10 years were voluntarily recruited from the public primary school of the rural community of El Higueral in Culiacan, Sinaloa (Northwest Mexico) for a cross-sectional study with a longitudinal follow-up of 5 weeks. Data were collected on socioeconomic status, anthropometry, haematological and biochemical indices of iron status, daily iron intake, and prevalence and intensity of trichuriasis. Multiple regression models, independent t-test and paired t-test were used to analyse the association between trichuriasis and iron status in cross-sectional and longitudinal samples, respectively. Adjusted models were tested for linear regression assumptions using residual plots. The mean age of the Trichuris-free and Trichuris-infected groups was 7.7±1.3 and 7.7±1.5 years respectively (P=0.92). The height for age was significantly higher in the Trichuris-free group than the Trichuris-infected group (P=0.02). No differences were found in the socioeconomic variables between the two groups. At baseline, significantly higher concentrations of haemoglobin, haematocrit, blood cell count (RBC) and serum iron were measured in the Trichuris-free group compared with the Trichuris-infected children (P<0.05). An association was found between trichuriasis and haemoglobin adjusted for socioeconomic variables, age and sex. Haemoglobin, RBC and serum ferritin concentrations were significantly increased in the infected children 5 weeks after treatment (P<0.05). Trichuriasis could be a risk factor for low-iron status in the schoolchildren of Northwest Mexico.

Extended quantification of the generalized recurrence plot

NASA Astrophysics Data System (ADS)

Riedl, Maik; Marwan, Norbert; Kurths, Jürgen

2016-04-01

The generalized recurrence plot is a modern tool for quantification of complex spatial patterns. Its application spans the analysis of trabecular bone structures, Turing structures, turbulent spatial plankton patterns, and fractals. But, it is also successfully applied to the description of spatio-temporal dynamics and the detection of regime shifts, such as in the complex Ginzburg-Landau- equation. The recurrence plot based determinism is a central measure in this framework quantifying the level of regularities in temporal and spatial structures. We extend this measure for the generalized recurrence plot considering additional operations of symmetry than the simple translation. It is tested not only on two-dimensional regular patterns and noise but also on complex spatial patterns reconstructing the parameter space of the complex Ginzburg-Landau-equation. The extended version of the determinism resulted in values which are consistent to the original recurrence plot approach. Furthermore, the proposed method allows a split of the determinism into parts which based on laminar and non-laminar regions of the two-dimensional pattern of the complex Ginzburg-Landau-equation. A comparison of these parts with a standard method of image classification, the co-occurrence matrix approach, shows differences especially in the description of patterns associated with turbulence. In that case, it seems that the extended version of the determinism allows a distinction of phase turbulence and defect turbulence by means of their spatial patterns. This ability of the proposed method promise new insights in other systems with turbulent dynamics coming from climatology, biology, ecology, and social sciences, for example.

Polar plot representation of time-resolved fluorescence.

PubMed

Eichorst, John Paul; Wen Teng, Kai; Clegg, Robert M

2014-01-01

Measuring changes in a molecule's fluorescence emission is a common technique to study complex biological systems such as cells and tissues. Although the steady-state fluorescence intensity is frequently used, measuring the average amount of time that a molecule spends in the excited state (the fluorescence lifetime) reveals more detailed information about its local environment. The lifetime is measured in the time domain by detecting directly the decay of fluorescence following excitation by short pulse of light. The lifetime can also be measured in the frequency domain by recording the phase and amplitude of oscillation in the emitted fluorescence of the sample in response to repetitively modulated excitation light. In either the time or frequency domain, the analysis of data to extract lifetimes can be computationally intensive. For example, a variety of iterative fitting algorithms already exist to determine lifetimes from samples that contain multiple fluorescing species. However, recently a method of analysis referred to as the polar plot (or phasor plot) is a graphical tool that projects the time-dependent features of the sample's fluorescence in either the time or frequency domain into the Cartesian plane to characterize the sample's lifetime. The coordinate transformations of the polar plot require only the raw data, and hence, there are no uncertainties from extensive corrections or time-consuming fitting in this analysis. In this chapter, the history and mathematical background of the polar plot will be presented along with examples that highlight how it can be used in both cuvette-based and imaging applications.

Psychology in Mexico

ERIC Educational Resources Information Center

Ruiz, Eleonora Rubio

2011-01-01

The first formal psychology course taught in Mexico was in 1896 at Mexico's National University; today, National Autonomous University of Mexico (UNAM in Spanish). The modern psychology from Europe and the US in the late 19th century were the primary influences of Mexican psychology, as well as psychoanalysis and both clinical and experimental…

An ecoinformatics application for forest dynamics plot data management and sharing

Treesearch

Chau-Chin Lin; Abd Rahman Kassim; Kristin Vanderbilt; Donald Henshaw; Eda C. Melendez-Colom; John H. Porter; Kaoru Niiyama; Tsutomu Yagihashi; Sek Aun Tan; Sheng-Shan Lu; Chi-Wen Hsiao; Li-Wan Chang; Meei-Ru Jeng

2011-01-01

Several forest dynamics plot research projects in the East-Asia Pacific region of the International Long-Term Ecological Research network actively collect long-term data, and some of these large plots are members of the Center for Tropical Forest Science network. The wealth of forest plot data presents challenges in information management to researchers. In order to...

SPRUCE Porewater Chemistry Data for Experimental Plots Beginning in 2013

DOE Data Explorer

Griffiths, N. A. [Center, Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.; Sebestyen, S. D. [Center, Oak Ridge National Laboratory, U.S. Department of Energy, Oak Ridge, Tennessee, U.S.A.

2016-01-01

This data set reports the chemistry of porewater in the SPRUCE plots located in the S1 bog. Sample collection and analyses started in August of 2013 and will continue for the duration of the experiment. Results will be added to this data set and released to the public periodically as quality assurance and publication of results are accomplished. These data are the pre- and post-treatment data from the warming and elevated CO2 treatments associated with the SPRUCE experiment. There are 10 experimental plots in SPRUCE: 5 temperature treatments (+0, +2.25, +4.5, +6.75, +9°C) at ambient CO2, and the same 5 temperature treatments at elevated CO2 (+500 ppm). There are 7 additional ambient plots without experimental enclosures, and thus a total of 17 plots.

A Universal Graph Plotting Routine.

ERIC Educational Resources Information Center

Bogart, Theodore F., Jr.

1984-01-01

Presents a programing subroutine which will create a graphical plot that occupies any number of columns specified by user and will run with versions of BASIC programming language. Illustrations of the subroutine's ability to operate successfully for three possibilities (negative values, positive values, and both positive and negative values) are…

Triangular Plots and Spreadsheet Software.

ERIC Educational Resources Information Center

Holm, Paul Eric

1988-01-01

Describes how the limitations of the built-in graphics capabilities of spreadsheet software can be overcome by making full use of the flexibility of the grahics options. Uses triangular plots with labeled field boundaries produced using Lotus 1-2-3 to demonstrate these techniques and their use in teaching geology. (CW)

Unbalanced and Minimal Point Equivalent Estimation Second-Order Split-Plot Designs

NASA Technical Reports Server (NTRS)

Parker, Peter A.; Kowalski, Scott M.; Vining, G. Geoffrey

2007-01-01

Restricting the randomization of hard-to-change factors in industrial experiments is often performed by employing a split-plot design structure. From an economic perspective, these designs minimize the experimental cost by reducing the number of resets of the hard-to- change factors. In this paper, unbalanced designs are considered for cases where the subplots are relatively expensive and the experimental apparatus accommodates an unequal number of runs per whole-plot. We provide construction methods for unbalanced second-order split- plot designs that possess the equivalence estimation optimality property, providing best linear unbiased estimates of the parameters; independent of the variance components. Unbalanced versions of the central composite and Box-Behnken designs are developed. For cases where the subplot cost approaches the whole-plot cost, minimal point designs are proposed and illustrated with a split-plot Notz design.

Influence of lidar, Landsat imagery, disturbance history, plot location accuracy, and plot size on accuracy of imputation maps of forest composition and structure

Treesearch

Harold S.J. Zald; Janet L. Ohmann; Heather M. Roberts; Matthew J. Gregory; Emilie B. Henderson; Robert J. McGaughey; Justin Braaten

2014-01-01

This study investigated how lidar-derived vegetation indices, disturbance history from Landsat time series (LTS) imagery, plot location accuracy, and plot size influenced accuracy of statistical spatial models (nearest-neighbor imputation maps) of forest vegetation composition and structure. Nearest-neighbor (NN) imputation maps were developed for 539,000 ha in the...

Plot shape effects on plant species diversity measurements

USGS Publications Warehouse

Keeley, Jon E.; Fotheringham, C.J.

2005-01-01

Abstract. Question: Do rectangular sample plots record more plant species than square plots as suggested by both empirical and theoretical studies?Location: Grasslands, shrublands and forests in the Mediterranean-climate region of California, USA.Methods: We compared three 0.1-ha sampling designs that differed in the shape and dispersion of 1-m2 and 100-m2 nested subplots. We duplicated an earlier study that compared the Whittaker sample design, which had square clustered subplots, with the modified Whittaker design, which had dispersed rectangular subplots. To sort out effects of dispersion from shape we used a third design that overlaid square subplots on the modified Whittaker design. Also, using data from published studies we extracted species richness values for 400-m2 subplots that were either square or 1:4 rectangles partially overlaid on each other from desert scrub in high and low rainfall years, chaparral, sage scrub, oak savanna and coniferous forests with and without fire.Results: We found that earlier empirical reports of more than 30% greater richness with rectangles were due to the confusion of shape effects with spatial effects, coupled with the use of cumulative number of species as the metric for comparison. Average species richness was not significantly different between square and 1:4 rectangular sample plots at either 1- or 100-m2. Pairwise comparisons showed no significant difference between square and rectangular samples in all but one vegetation type, and that one exhibited significantly greater richness with squares. Our three intensive study sites appear to exhibit some level of self-similarity at the scale of 400 m2, but, contrary to theoretical expectations, we could not detect plot shape effects on species richness at this scale.Conclusions: At the 0.1-ha scale or lower there is no evidence that plot shape has predictable effects on number of species recorded from sample plots. We hypothesize that for the mediterranean

Procedures for establishing and maintaining permanent plots for silvicultural and yield research.

Treesearch

Robert O. Curtis

1983-01-01

This paper reviews procedures for establishing and maintaining permanent plots for silvicultural and yield research; discusses purposes, sampling, and plot design; points out common errors; and makes recommendations for research plot designs and procedures for measuring and recording data.

Comparison of Imputation Procedures for Replacing Denied-access Plots

Treesearch

Susan L. King

2005-01-01

In forest inventories, missing plots are caused by hazardous terrain, inaccessible locations, or denied access. Maryland had a large number of denied-access plots in the latest periodic inventory conducted by the Northeastern Forest Inventory and Analysis unit. The denial pattern, which can introduce error into the estimates, was investigated by dropping the 1999...

Stain Associated with Nails in Trees on Permanent Plots

Treesearch

Charles B. Briscoe; Benton H. Box

1959-01-01

In studies involving the measurement and subsequent remeasurement of trees, such as CFI plots or siliviculture research plots, the trees are commonly identified by metal tags fastened to the trees by means of nails. In 1957 a study was begun to determine whether this practice would lead to dregrade or scalable defect in the trees.

Refining FIA plot locations using LiDAR point clouds

Treesearch

Charlie Schrader-Patton; Greg C. Liknes; Demetrios Gatziolis; Brian M. Wing; Mark D. Nelson; Patrick D. Miles; Josh Bixby; Daniel G. Wendt; Dennis Kepler; Abbey Schaaf

2015-01-01

Forest Inventory and Analysis (FIA) plot location coordinate precision is often insufficient for use with high resolution remotely sensed data, thereby limiting the use of these plots for geospatial applications and reducing the validity of models that assume the locations are precise. A practical and efficient method is needed to improve coordinate precision. To...

DISSPLA plotting routines for the G-189A EC/LS computer program

NASA Technical Reports Server (NTRS)

Simpson, C. D.

1982-01-01

Data from a G-189A execution is formatted and plotted. The plotting may be done at the time of execution of the program. DISSPLA plot packages are used. The user has the choice of FR80 or TEKTRONIX output.

Opportunity for America: Mexico`s coal future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loose, V.W.

1993-09-01

This study examines the history, current status and future prospects for increased coal use in Mexico. Environmental implications of the power-generation capacity expansion plans are examined in general terms. Mexican environmental law and regulations are briefly reviewed along with the new sense of urgency in the cleanup of existing environmental problems and avoidance of new problems as clearly mandated in recent Mexican government policy initiatives. It is expected that new capital facilities will need to incorporate the latest in process and technology to comply with existing environmental regulation. Technology developments which address these issues are identified. What opportunities have newmore » initiatives caused by the recent diversification of Mexico`s energy economy offered US firms? This report looks at the potential future use of coal in the Mexican energy economy, examining this issue with an eye toward identifying markets that might be available to US coal producers and the best way to approach them. Market opportunities are identified by examining new developments in the Mexican economy generally and the energy economy particularly. These developments are examined in light of the current situation and the history which brought Mexico to its present status.« less

Boundary pint corrections for variable radius plots - simulation results

Treesearch

Margaret Penner; Sam Otukol

2000-01-01

The boundary plot problem is encountered when a forest inventory plot includes two or more forest conditions. Depending on the correction method used, the resulting estimates can be biased. The various correction alternatives are reviewed. No correction, area correction, half sweep, and toss-back methods are evaluated using simulation on an actual data set. Based on...

Effects of plot size on forest-type algorithm accuracy

Treesearch

James A. Westfall

2009-01-01

The Forest Inventory and Analysis (FIA) program utilizes an algorithm to consistently determine the forest type for forested conditions on sample plots. Forest type is determined from tree size and species information. Thus, the accuracy of results is often dependent on the number of trees present, which is highly correlated with plot area. This research examines the...

Estimating mapped-plot forest attributes with ratios of means

Treesearch

S.J. Zarnoch; W.A. Bechtold

2000-01-01

The mapped-plot design utilized by the U.S. Department of Agriculture (USDA) Forest Inventory and Analysis and the National Forest Health Monitoring Programs is described. Data from 2458 forested mapped plots systematically spread across 25 States reveal that 35 percent straddle multiple conditions. The ratio-of-means estimator is developed as a method to obtain...

Mexico`s basins could provide niches for various sized firms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, G.; Wilson, J.L.

The recent Shell Oil Co.-led exploratory well in 7,000 ft of water in the Gulf of Mexico off Brownsville, Texas, and close to Mexican territory, initially provoked a controversy in Mexico. The announcement of the Baha well reminded Mexicans that the US Senate has not yet ratified the draft treaty to define territorial and resource boundaries. News of the well was portrayed in mexico as poaching and old-fashioned American imperialism. Although subsequent reports confirmed that the well is unequivocally in US waters, the initial confusion added to a growing dilemma in professional geological circles and with a few federal, state,more » and local officials. In this discussion, which is part of a larger study, the authors wish to clarify some of the issues in the upstream policy debate in Mexico. They do this by visualizing a counter-factual condition: that worldwide E and P patterns and norms exist in Mexico. The discussion will not treat the implementation of such patterns or norms (e.g., by reference to the Venezuelan or Argentine models). For this discussion they assume simply that worldwide production practices and agreements exist in Mexico. Just as important, they assume that industrial efficiencies, by producer type, are the principal drivers of the allocation of E and P resources in Mexico. The authors discuss the illustrative areas and fields of hydrocarbon production, actual and potential, from the perspective of the advantages and limitations associated with the various categories of explorationists and producers.« less

Considerations in Forest Growth Estimation Between Two Measurements of Mapped Forest Inventory Plots

Treesearch

Michael T. Thompson

2006-01-01

Several aspects of the enhanced Forest Inventory and Analysis (FIA) program?s national plot design complicate change estimation. The design incorporates up to three separate plot sizes (microplot, subplot, and macroplot) to sample trees of different sizes. Because multiple plot sizes are involved, change estimators designed for polyareal plot sampling, such as those...

New Mexico: Los Alamos

Atmospheric Science Data Center

2014-05-15

article title:  Los Alamos, New Mexico     View Larger JPEG image ... kb) Multi-angle views of the Fire in Los Alamos, New Mexico, May 9, 2000. These true-color images covering north-central New Mexico ...

Gulf of Mexico

Atmospheric Science Data Center

2014-05-15

article title:  Gulf of Mexico Oil Slick       View ... 22, 2010, the Deepwater Horizon oil platform in the Gulf of Mexico sank in nearly 1,500 meters (4,900 feet) of water after an explosion ... appear lighter blue on the darker blue waters of the Gulf of Mexico. Some clouds are visible in the extreme lower left corner of the image. ...

Automatic Target Recognition Based on Cross-Plot

PubMed Central

Wong, Kelvin Kian Loong; Abbott, Derek

2011-01-01

Automatic target recognition that relies on rapid feature extraction of real-time target from photo-realistic imaging will enable efficient identification of target patterns. To achieve this objective, Cross-plots of binary patterns are explored as potential signatures for the observed target by high-speed capture of the crucial spatial features using minimal computational resources. Target recognition was implemented based on the proposed pattern recognition concept and tested rigorously for its precision and recall performance. We conclude that Cross-plotting is able to produce a digital fingerprint of a target that correlates efficiently and effectively to signatures of patterns having its identity in a target repository. PMID:21980508

National land cover monitoring using large, permanent photo plots

Treesearch

Raymond L. Czaplewski; Glenn P. Catts; Paul W. Snook

1987-01-01

A study in the State of North Carplina, U.S.A. demonstrated that large, permanent photo plots (400 hectares) can be used to monitor large regions of land by using remote sensing techniques. Estimates of area in a variety of land cover categories were made by photointerpretation of medium-scale aerial photography from a single month using 111 photo plots. Many of these...

[Heart rate variability study based on a novel RdR RR Intervals Scatter Plot].

PubMed

Lu, Hongwei; Lu, Xiuyun; Wang, Chunfang; Hua, Youyuan; Tian, Jiajia; Liu, Shihai

2014-08-01

On the basis of Poincare scatter plot and first order difference scatter plot, a novel heart rate variability (HRV) analysis method based on scatter plots of RR intervals and first order difference of RR intervals (namely, RdR) was proposed. The abscissa of the RdR scatter plot, the x-axis, is RR intervals and the ordinate, y-axis, is the difference between successive RR intervals. The RdR scatter plot includes the information of RR intervals and the difference between successive RR intervals, which captures more HRV information. By RdR scatter plot analysis of some records of MIT-BIH arrhythmias database, we found that the scatter plot of uncoupled premature ventricular contraction (PVC), coupled ventricular bigeminy and ventricular trigeminy PVC had specific graphic characteristics. The RdR scatter plot method has higher detecting performance than the Poincare scatter plot method, and simpler and more intuitive than the first order difference method.

Flyby Error Analysis Based on Contour Plots for the Cassini Tour

NASA Technical Reports Server (NTRS)

Stumpf, P. W.; Gist, E. M.; Goodson, T. D.; Hahn, Y.; Wagner, S. V.; Williams, P. N.

2008-01-01

The maneuver cancellation analysis consists of cost contour plots employed by the Cassini maneuver team. The plots are two-dimensional linear representations of a larger six-dimensional solution to a multi-maneuver, multi-encounter mission at Saturn. By using contours plotted with the dot product of vectors B and R and the dot product of vectors B and T components, it is possible to view the effects delta V on for various encounter positions in the B-plane. The plot is used in operations to help determine if the Approach Maneuver (ensuing encounter minus three days) and/or the Cleanup Maneuver (ensuing encounter plus three days) can be cancelled and also is a linear check of an integrated solution.

Using canopy resistance for infrared heater control when warming open-field plots

USDA-ARS?s Scientific Manuscript database

Several research groups are using or planning to use arrays of infrared heaters to simulate global warming in open-field plots with a control strategy that involves maintaining a constant rise in canopy temperatures of the heated plots above those of un-heated Reference plots. . However, if the warm...

Experimental Garden Plots for Botany Lessons

ERIC Educational Resources Information Center

Gorodnicheva, V. V.; Vasil'eva, E. I.

1976-01-01

Discussion of the botany lessons used at two schools points out the need for fifth and sixth grade students to be taught the principles of plant life through observations made at an experimental garden plot at the school. (ND)

How effective are biodiversity conservation payments in Mexico?

PubMed

Costedoat, Sébastien; Corbera, Esteve; Ezzine-de-Blas, Driss; Honey-Rosés, Jordi; Baylis, Kathy; Castillo-Santiago, Miguel Angel

2015-01-01

We assess the additional forest cover protected by 13 rural communities located in the southern state of Chiapas, Mexico, as a result of the economic incentives received through the country's national program of payments for biodiversity conservation. We use spatially explicit data at the intra-community level to define a credible counterfactual of conservation outcomes. We use covariate-matching specifications associated with spatially explicit variables and difference-in-difference estimators to determine the treatment effect. We estimate that the additional conservation represents between 12 and 14.7 percent of forest area enrolled in the program in comparison to control areas. Despite this high degree of additionality, we also observe lack of compliance in some plots participating in the PES program. This lack of compliance casts doubt on the ability of payments alone to guarantee long-term additionality in context of high deforestation rates, even with an augmented program budget or extension of participation to communities not yet enrolled.

How Effective Are Biodiversity Conservation Payments in Mexico?

PubMed Central

Costedoat, Sébastien; Corbera, Esteve; Ezzine-de-Blas, Driss; Honey-Rosés, Jordi; Baylis, Kathy; Castillo-Santiago, Miguel Angel

2015-01-01

We assess the additional forest cover protected by 13 rural communities located in the southern state of Chiapas, Mexico, as a result of the economic incentives received through the country's national program of payments for biodiversity conservation. We use spatially explicit data at the intra-community level to define a credible counterfactual of conservation outcomes. We use covariate-matching specifications associated with spatially explicit variables and difference-in-difference estimators to determine the treatment effect. We estimate that the additional conservation represents between 12 and 14.7 percent of forest area enrolled in the program in comparison to control areas. Despite this high degree of additionality, we also observe lack of compliance in some plots participating in the PES program. This lack of compliance casts doubt on the ability of payments alone to guarantee long-term additionality in context of high deforestation rates, even with an augmented program budget or extension of participation to communities not yet enrolled. PMID:25807118

Towards a plot size for Canada's national forest inventory

Treesearch

Steen Magnussen; P. Boudewyn; M. Gillis

2000-01-01

A proposed national forest inventory for Canada is to report on the state and trends of resource attributes gathered mainly from aerial photos of sample plots located on a national grid. A pilot project in New Brunswick indicates it takes about 2,800 square 400-ha plots (10 percent inventoried) to achieve a relative standard error of 10 percent or less on 14 out of 17...

Fitting Data to Model: Structural Equation Modeling Diagnosis Using Two Scatter Plots

ERIC Educational Resources Information Center

Yuan, Ke-Hai; Hayashi, Kentaro

2010-01-01

This article introduces two simple scatter plots for model diagnosis in structural equation modeling. One plot contrasts a residual-based M-distance of the structural model with the M-distance for the factor score. It contains information on outliers, good leverage observations, bad leverage observations, and normal cases. The other plot contrasts…

Mexico and Central America.

PubMed

Bronfman, M

1998-01-01

This article reviews the literature on migration and HIV/AIDS in Mexico and Central America, including Belize, Costa Rica, El Salvador, Guatemala, Honduras, Mexico, Nicaragua, and Panama. Most migrants travel to the US through Mexico. US-Mexico trade agreements created opportunities for increased risk of HIV transmission. The research literature focuses on Mexico. Most countries, with the exception of Belize and Costa Rica, are sending countries. Human rights of migrants are violated in transit and at destination. Migration policies determine migration processes. The Mexican-born population in the US is about 3% of US population and 8% of Mexico's population. About 22% arrived during 1992-97, and about 500,000 are naturalized US citizens. An additional 11 million have a Mexican ethnic background. Mexican migrants are usually economically active men who had jobs before leaving and were urban people who settled in California, Texas, Illinois, and Arizona. Most Mexican migrants enter illegally. Many return to Mexico. The main paths of HIV transmission are homosexual, heterosexual, and IV-drug-injecting persons. Latino migrants frequently use prostitutes, adopt new sexual practices including anal penetration among men, greater diversity of sexual partners, and use of injectable drugs.

Zipper plot: visualizing transcriptional activity of genomic regions.

PubMed

Avila Cobos, Francisco; Anckaert, Jasper; Volders, Pieter-Jan; Everaert, Celine; Rombaut, Dries; Vandesompele, Jo; De Preter, Katleen; Mestdagh, Pieter

2017-05-02

Reconstructing transcript models from RNA-sequencing (RNA-seq) data and establishing these as independent transcriptional units can be a challenging task. Current state-of-the-art tools for long non-coding RNA (lncRNA) annotation are mainly based on evolutionary constraints, which may result in false negatives due to the overall limited conservation of lncRNAs. To tackle this problem we have developed the Zipper plot, a novel visualization and analysis method that enables users to simultaneously interrogate thousands of human putative transcription start sites (TSSs) in relation to various features that are indicative for transcriptional activity. These include publicly available CAGE-sequencing, ChIP-sequencing and DNase-sequencing datasets. Our method only requires three tab-separated fields (chromosome, genomic coordinate of the TSS and strand) as input and generates a report that includes a detailed summary table, a Zipper plot and several statistics derived from this plot. Using the Zipper plot, we found evidence of transcription for a set of well-characterized lncRNAs and observed that fewer mono-exonic lncRNAs have CAGE peaks overlapping with their TSSs compared to multi-exonic lncRNAs. Using publicly available RNA-seq data, we found more than one hundred cases where junction reads connected protein-coding gene exons with a downstream mono-exonic lncRNA, revealing the need for a careful evaluation of lncRNA 5'-boundaries. Our method is implemented using the statistical programming language R and is freely available as a webtool.

An exploratory drilling exhaustion sequence plot program

USGS Publications Warehouse

Schuenemeyer, J.H.; Drew, L.J.

1977-01-01

The exhaustion sequence plot program computes the conditional area of influence for wells in a specified rectangular region with respect to a fixed-size deposit. The deposit is represented by an ellipse whose size is chosen by the user. The area of influence may be displayed on computer printer plots consisting of a maximum of 10,000 grid points. At each point, a symbol is presented that indicates the probability of that point being exhausted by nearby wells with respect to a fixed-size ellipse. This output gives a pictorial view of the manner in which oil fields are exhausted. In addition, the exhaustion data may be used to estimate the number of deposits remaining in a basin. ?? 1977.

SpectraPLOT, Visualization Package with a User-Friendly Graphical Interface

NASA Astrophysics Data System (ADS)

Sebald, James; Macfarlane, Joseph; Golovkin, Igor

2017-10-01

SPECT3D is a collisional-radiative spectral analysis package designed to compute detailed emission, absorption, or x-ray scattering spectra, filtered images, XRD signals, and other synthetic diagnostics. The spectra and images are computed for virtual detectors by post-processing the results of hydrodynamics simulations in 1D, 2D, and 3D geometries. SPECT3D can account for a variety of instrumental response effects so that direct comparisons between simulations and experimental measurements can be made. SpectraPLOT is a user-friendly graphical interface for viewing a wide variety of results from SPECT3D simulations, and applying various instrumental effects to the simulated images and spectra. We will present SpectraPLOT's ability to display a variety of data, including spectra, images, light curves, streaked spectra, space-resolved spectra, and drilldown plasma property plots, for an argon-doped capsule implosion experiment example. Future SpectraPLOT features and enhancements will also be discussed.

76 FR 73595 - Healthcare Technology, Policy & Trade Mission: Mexico City, Mexico, May 13-16, 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... printed company directory; Networking reception at Ambassador's residence or other venue in Mexico City on... Mission: Mexico City, Mexico, May 13-16, 2012 AGENCY: International Trade Administration, Department of... policy and trade mission to Mexico City, May 13-16, 2012. This mission is intended to focus on a variety...

On the Nature of Earth-Mars Porkchop Plots

NASA Technical Reports Server (NTRS)

Woolley, Ryan C.; Whetsel, Charles W.

2013-01-01

Porkchop plots are a quick and convenient tool to help mission designers plan ballistic trajectories between two bodies. Parameter contours give rise to the familiar 'porkchop' shape. Each synodic period the pattern repeats, but not exactly, primarily due to differences in inclination and non-zero eccentricity. In this paper we examine the morphological features of Earth-to-Mars porkchop plots and the orbital characteristics that create them. These results are compared to idealistic and optimized transfers. Conclusions are drawn about 'good' opportunities versus 'bad' opportunities for different mission applications.

9 CFR 108.2 - Plot plans, blueprints, and legends required.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Plot plans, blueprints, and legends required. 108.2 Section 108.2 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.2 Plot plans, blueprints, and legends required. Each applicant...

Visual analytics of large multidimensional data using variable binned scatter plots

NASA Astrophysics Data System (ADS)

Hao, Ming C.; Dayal, Umeshwar; Sharma, Ratnesh K.; Keim, Daniel A.; Janetzko, Halldór

2010-01-01

The scatter plot is a well-known method of visualizing pairs of two-dimensional continuous variables. Multidimensional data can be depicted in a scatter plot matrix. They are intuitive and easy-to-use, but often have a high degree of overlap which may occlude a significant portion of data. In this paper, we propose variable binned scatter plots to allow the visualization of large amounts of data without overlapping. The basic idea is to use a non-uniform (variable) binning of the x and y dimensions and plots all the data points that fall within each bin into corresponding squares. Further, we map a third attribute to color for visualizing clusters. Analysts are able to interact with individual data points for record level information. We have applied these techniques to solve real-world problems on credit card fraud and data center energy consumption to visualize their data distribution and cause-effect among multiple attributes. A comparison of our methods with two recent well-known variants of scatter plots is included.

[Effect of comprehensive control and prevention for chronic disease in demonstration plot of Chongqing].

PubMed

Qi, Li; Ding, Xian-bin; Mao, De-qiang; Feng, Lian-gui; Wang, Yu-lin; Jiao, Yan; Zhang, Chun-hua; Lü, Xiao-yan; Li, Hong; Xia, Yi-yin

2013-03-01

To evaluate the effect of comprehensive control and prevention for chronic diseases in demonstration plot of Chongqing. Residents were enrolled through multi-stage stratified random sampling method from 17 districts or counties which had successfully established demonstration plots and 21 districts or counties which had not established demonstration plots (non-demonstration plot for short) yet on May, 2012. Questionnaire was designed to survey awareness of health knowledge, health behaviors and utilization of health supportive tools. The results were analyzed by SPSS 15.0 software. We investigated 15 108 residents, 6156 of which were in demonstration plot and others (8951) were not. The findings revealed the percentage of the people who were aware the national action of health lifestyle in demonstration plot and in non-demonstration plot were 44.4% (2734/6157) and 40.2% (3598/8951), respectively, and the awareness of the hypertension risk of too much sodium were 72.4% (4458/6156) and 67.5% (6042/8951), respectively, and the awareness of the cardinal vascular disease (CVD) risk of obesity and overweight were 77.2% (4753/6157) and 69.6% (6230/8951), respectively. About the residents' health behaviors in demonstration plot and in non-demonstration plot, the utilization rates of salt restriction scoop or pot were 23.5% (1447/6157) and 17.9% (1602/8951), and the utilization rates of oil restriction pot were 16.7% (1028/6157) and 11.8% (1064/8951), respectively. Totally, 33 of the 37 indexes were shown higher in demonstration plot than that in non-demonstration plot (P < 0.05). The chronic diseases comprehensive control and prevention in demonstration plot was more effective, and the remarkable improvement of health knowledge and behaviors level had been achieved in demonstration plot.

Modeling post-fire woody carbon dynamics with data from remeasured inventory plots

Treesearch

Bianca N.I. Eskelson; Jeremy Fried; Vicente Monleon

2015-01-01

In California, the Forest Inventory and Analysis (FIA) plots within large fires were visited one year after the fire occurred resulting in a time series of measurements before and after fire. During this additional plot visit, the standard inventory measurements were augmented for these burned plots to assess fire effects. One example of the additional measurements is...

New Mexico Math Pathways Taskforce Report

ERIC Educational Resources Information Center

New Mexico Higher Education Department, 2016

2016-01-01

In April 2015 New Mexico faculty, Dana Center staff, and New Mexico Higher Education (NMHED) co-presented the need for better math pathways statewide. Faculty from 6 institutions (New Mexico State University, New Mexico Highlands University, Dine College, Eastern New Mexico University, El Paso Community College, and San Juan College) participated…

[Effects of sampling plot number on tree species distribution prediction under climate change].

PubMed

Liang, Yu; He, Hong-Shi; Wu, Zhi-Wei; Li, Xiao-Na; Luo, Xu

2013-05-01

Based on the neutral landscapes under different degrees of landscape fragmentation, this paper studied the effects of sampling plot number on the prediction of tree species distribution at landscape scale under climate change. The tree species distribution was predicted by the coupled modeling approach which linked an ecosystem process model with a forest landscape model, and three contingent scenarios and one reference scenario of sampling plot numbers were assumed. The differences between the three scenarios and the reference scenario under different degrees of landscape fragmentation were tested. The results indicated that the effects of sampling plot number on the prediction of tree species distribution depended on the tree species life history attributes. For the generalist species, the prediction of their distribution at landscape scale needed more plots. Except for the extreme specialist, landscape fragmentation degree also affected the effects of sampling plot number on the prediction. With the increase of simulation period, the effects of sampling plot number on the prediction of tree species distribution at landscape scale could be changed. For generalist species, more plots are needed for the long-term simulation.

Smoothed Residual Plots for Generalized Linear Models. Technical Report #450.

ERIC Educational Resources Information Center

Brant, Rollin

Methods for examining the viability of assumptions underlying generalized linear models are considered. By appealing to the likelihood, a natural generalization of the raw residual plot for normal theory models is derived and is applied to investigating potential misspecification of the linear predictor. A smooth version of the plot is also…

Activities: Plotting and Predicting from Pairs.

ERIC Educational Resources Information Center

Shulte, Albert P.; Swift, Jim

1984-01-01

This teacher's guide provides objectives, procedures, and list of materials needed for activities which center around the use of a scatter plot to examine relationships shown by bivariate data. The activities are suitable for grades 7 to 12. Four student worksheets are included. (JN)

Orientation-Enhanced Parallel Coordinate Plots.

PubMed

Raidou, Renata Georgia; Eisemann, Martin; Breeuwer, Marcel; Eisemann, Elmar; Vilanova, Anna

2016-01-01

Parallel Coordinate Plots (PCPs) is one of the most powerful techniques for the visualization of multivariate data. However, for large datasets, the representation suffers from clutter due to overplotting. In this case, discerning the underlying data information and selecting specific interesting patterns can become difficult. We propose a new and simple technique to improve the display of PCPs by emphasizing the underlying data structure. Our Orientation-enhanced Parallel Coordinate Plots (OPCPs) improve pattern and outlier discernibility by visually enhancing parts of each PCP polyline with respect to its slope. This enhancement also allows us to introduce a novel and efficient selection method, the Orientation-enhanced Brushing (O-Brushing). Our solution is particularly useful when multiple patterns are present or when the view on certain patterns is obstructed by noise. We present the results of our approach with several synthetic and real-world datasets. Finally, we conducted a user evaluation, which verifies the advantages of the OPCPs in terms of discernibility of information in complex data. It also confirms that O-Brushing eases the selection of data patterns in PCPs and reduces the amount of necessary user interactions compared to state-of-the-art brushing techniques.

Digital computer programs for generating oblique orthographic projections and contour plots

NASA Technical Reports Server (NTRS)

Giles, G. L.

1975-01-01

User and programer documentation is presented for two programs for automatic plotting of digital data. One of the programs generates oblique orthographic projections of three-dimensional numerical models and the other program generates contour plots of data distributed in an arbitrary planar region. A general description of the computational algorithms, user instructions, and complete listings of the programs is given. Several plots are included to illustrate various program options, and a single example is described to facilitate learning the use of the programs.

A computational model of selection by consequences: log survivor plots.

PubMed

Kulubekova, Saule; McDowell, J J

2008-06-01

[McDowell, J.J, 2004. A computational model of selection by consequences. J. Exp. Anal. Behav. 81, 297-317] instantiated the principle of selection by consequences in a virtual organism with an evolving repertoire of possible behaviors undergoing selection, reproduction, and mutation over many generations. The process is based on the computational approach, which is non-deterministic and rules-based. The model proposes a causal account for operant behavior. McDowell found that the virtual organism consistently showed a hyperbolic relationship between response and reinforcement rates according to the quantitative law of effect. To continue validation of the computational model, the present study examined its behavior on the molecular level by comparing the virtual organism's IRT distributions in the form of log survivor plots to findings from live organisms. Log survivor plots did not show the "broken-stick" feature indicative of distinct bouts and pauses in responding, although the bend in slope of the plots became more defined at low reinforcement rates. The shape of the virtual organism's log survivor plots was more consistent with the data on reinforced responding in pigeons. These results suggest that log survivor plot patterns of the virtual organism were generally consistent with the findings from live organisms providing further support for the computational model of selection by consequences as a viable account of operant behavior.

English Teaching in Mexico.

ERIC Educational Resources Information Center

Salazar, Denise

2002-01-01

Discusses teaching English in Mexico, a country with important social, cultural, and economic ties to the United States. Looks at the various English teaching situations as well as teacher education for teachers in Mexico. Concludes that the English teaching situation in Mexico reflects great diversity and growth, and that the knowledge of English…

Procedures to handle inventory cluster plots that straddle two or more conditions

Treesearch

Jerold T. Hahn; Colin D. MacLean; Stanford L. Arner; William A. Bechtold

1995-01-01

We review the relative merits and field procedures for four basic plot designs to handle forest inventory plots that straddle two or more conditions, given that subplots will not be moved. A cluster design is recommended that combines fixed-area subplots and variable-radius plot (VRP) sampling. Each subplot in a cluster consists of a large fixed-area subplot for...

Distribution of permanent plots to evaluate silvicultural treatments in the Inland Empire

Treesearch

John C. Byrne; Albert R. Stage; David L. Renner

1988-01-01

To assess the adequacy of a permanent-plot data base for estimating growth and yield, one first needs to know how the plots in the data base are distributed in relation to the population they are presumed to represent. The distribution of permanent plots to study forest growth in the Inland Empire (northeastern Washington, northern Idaho, and western Montana) is...

Saline water in southeastern New Mexico

USGS Publications Warehouse

Hiss, W.L.; Peterson, J.B.; Ramsey, T.R.

1969-01-01

Saline waters from formations of several geologic ages are being studied in a seven-county area in southeastern New Mexico and western Texas, where more than 30,000 oil and gas tests have been drilled in the past 40 years. This area of 7,500 sq. miles, which is stratigraphically complex, includes the northern and eastern margins of the Delaware Basin between the Guadalupe and Glass Mountains. Chloride-ion concentrations in water produced from rocks of various ages and depths have been mapped in Lea County, New Mexico, using machine map-plotting techniques and trend analyses. Anomalously low chloride concentrations (1,000-3,000 mg/l) were found along the western margin of the Central Basin platform in the San Andres and Capitan Limestone Formations of Permian age. These low chloride-ion concentrations may be due to preferential circulation of ground water through the more porous and permeable rocks. Data being used in the study were obtained principally from oil companies and from related service companies. The P.B.W.D.S. (Permian Basin Well Data System) scout-record magnetic-tape file was used as a framework in all computer operations. Shallow or non-oil-field water analyses acquired from state, municipal, or federal agencies were added to these data utilizing P.B.W.D.S.-compatible reference numbers and decimal latitude-longitude coordinates. Approximately 20,000 water analyses collected from over 65 sources were coded, recorded on punch cards and stored on magnetic tape for computer operations. Extensive manual and computer error checks for duplication and accuracy were made to eliminate data errors resulting from poorly located or identified samples; non-representative or contaminated samples; mistakes in coding, reproducing or key-punching; laboratory errors; and inconsistent reporting. The original 20,000 analyses considered were reduced to 6,000 representative analyses which are being used in the saline water studies. ?? 1969.

Precise FIA plot registration using field and dense LIDAR data

Treesearch

Demetrios Gatziolis

2009-01-01

Precise registration of forest inventory and analysis (FIA) plots is a prerequisite for an effective fusion of field data with ancillary spatial information, which is an approach commonly employed in the mapping of various forest parameters. Although the adoption of Global Positioning System technology has improved the precision of plot coordinates obtained during...

An investigation of condition mapping and plot proportion calculation issues

Treesearch

Demetrios Gatziolis

2007-01-01

A systematic examination of Forest Inventory and Analysis condition data collected under the annual inventory protocol in the Pacific Northwest region between 2000 and 2004 revealed the presence of errors both in condition topology and plot proportion computations. When plots were compiled to generate population estimates, proportion errors were found to cause...

A Guided Inquiry on Hubble Plots and the Big Bang

ERIC Educational Resources Information Center

Forringer, Ted

2014-01-01

In our science for non-science majors course "21st Century Physics," we investigate modern "Hubble plots" (plots of velocity versus distance for deep space objects) in order to discuss the Big Bang, dark matter, and dark energy. There are two potential challenges that our students face when encountering these topics for the…

Another Mexico

ERIC Educational Resources Information Center

Romano, Carlin

2009-01-01

A Mexican saying holds that "Como Mexico no hay dos"--There is only one Mexico. American media these days interpret that notion with a vengeance. Story after story depicts a country overrun by out-of-control drug wars and murder, where corrupt police officers trip over beheaded victims more often than they nab perpetrators. South of the…

A Bayesian CUSUM plot: Diagnosing quality of treatment.

PubMed

Rosthøj, Steen; Jacobsen, Rikke-Line

2017-12-01

To present a CUSUM plot based on Bayesian diagnostic reasoning displaying evidence in favour of "healthy" rather than "sick" quality of treatment (QOT), and to demonstrate a technique using Kaplan-Meier survival curves permitting application to case series with ongoing follow-up. For a case series with known final outcomes: Consider each case a diagnostic test of good versus poor QOT (expected vs. increased failure rates), determine the likelihood ratio (LR) of the observed outcome, convert LR to weight taking log to base 2, and add up weights sequentially in a plot showing how many times odds in favour of good QOT have been doubled. For a series with observed survival times and an expected survival curve: Divide the curve into time intervals, determine "healthy" and specify "sick" risks of failure in each interval, construct a "sick" survival curve, determine the LR of survival or failure at the given observation times, convert to weights, and add up. The Bayesian plot was applied retrospectively to 39 children with acute lymphoblastic leukaemia with completed follow-up, using Nordic collaborative results as reference, showing equal odds between good and poor QOT. In the ongoing treatment trial, with 22 of 37 children still at risk for event, QOT has been monitored with average survival curves as reference, odds so far favoring good QOT 2:1. QOT in small patient series can be assessed with a Bayesian CUSUM plot, retrospectively when all treatment outcomes are known, but also in ongoing series with unfinished follow-up. © 2017 John Wiley & Sons, Ltd.

Biological Responses of the American Coot (Fulica americana), in wetlands with contrasting environmental conditions (Basin of México).

PubMed

López-Islas, María Eugenia; Ibarra-Meza, Itzel; Ortiz-Ordóñez, Esperanza; Favari, Liliana; Elías Sedeño-Díaz, J; López-López, Eugenia

2017-01-01

Wetland ecosystems are subject to severe impacts (physical and chemical) and to the input of various xenobiotics that provoke toxicological consequences. Waterbirds are potential sentinel species of these environments. To analyze how habitat conditions affect the health of Fulica americana, early-warning biomarkers, histopathology, somatic indices, and water quality were examined in two wetlands of the Basin of Mexico: Xochimilco, an urban wetland highly eutrophic with a mixture of pollutants, and Tecocomulco (the reference site), a rural wetland with hunting migratory birds in winter, and with some agricultural contaminants. Coots were collected over 1 year, and the birds were aged, eviscerated, and weighed. Liver samples were analyzed biochemically and histologically. Biomarkers revealed that coots displayed higher lipid peroxidation and elevated activities of gamma-glutamyl transferase and alanine aminotransferase, suggesting hepatic damage during autumn and winter. In Tecocomulco, coots during winter has the highest thiobarbituric acid reactive substances (as a measure of oxidative stress), which may be associated with the presence of predators. In Tecocomulco, the higher gonadosomatic index was detected in spring and summer, while in Xochimilco it was elevated in summer, indicating a delayed egg laying and reproduction in coots from the latter study site. In both wetlands, leukocyte infiltration, alone or combined with vasocongestion, reflected alterations in the inflammatory processes in liver throughout the annual cycle and thus potentially altered hepatic function and organism survival. In both wetlands, coots were permanent residents and chronically exposed to different stressors, suggesting damage may be irreversible with potentially adversely reproductive consequences.

Effect of rainfall simulator and plot scale on overland flow and phosphorus transport.

PubMed

Sharpley, Andrew; Kleinman, Peter

2003-01-01

Rainfall simulation experiments are widely used to study erosion and contaminant transport in overland flow. We investigated the use of two rainfall simulators designed to rain on 2-m-long (2-m2) and 10.7-m-long (32.6-m2) plots to estimate overland flow and phosphorus (P) transport in comparison with watershed-scale data. Simulated rainfall (75 mm h(-1)) generated more overland flow from 2-m-long (20 L m2) than from 10.7-m-long (10 L m2) plots established in grass, no-till corn (Zea mays L.), and recently tilled fields, because a relatively greater area of the smaller plots became saturated (>75% of area) during rainfall compared with large plots (<75% area). Although average concentrations of dissolved reactive phosphorus (DRP) in overland flow were greater from 2-m-long (0.50 mg L(-1)) than 10.7-m-long (0.35 mg L(-1)) plots, the relationship between DRP and Mehlich-3 soil P (as defined by regression slope) was similar for both plots and for published watershed data (0.0022 for grassed, 0.0036 for no-till, and 0.0112 for tilled sites). Conversely, sediment, particulate phosphorus (PP), and total phosphorus (TP) concentrations and selective transport of soil fines (<2 microm) were significantly lower from 2- than 10.7-m-long plots. However, slopes of the logarithmic regression between P enrichment ratio and sediment discharge were similar (0.281-0.301) for 2- and 10.7-m-long plots, and published watershed data. While concentrations and loads of P change with plot scales, processes governing DRP and PP transport in overland flow are consistent, supporting the limited use of small plots and rainfall simulators to assess the relationship between soil P and overland flow P as a function of soil type and management.

Convex Arrhenius plots and their interpretation

PubMed Central

Truhlar, Donald G.; Kohen, Amnon

2001-01-01

This paper draws attention to selected experiments on enzyme-catalyzed reactions that show convex Arrhenius plots, which are very rare, and points out that Tolman's interpretation of the activation energy places a fundamental model-independent constraint on any detailed explanation of these reactions. The analysis presented here shows that in such systems, the rate coefficient as a function of energy is not just increasing more slowly than expected, it is actually decreasing. This interpretation of the data provides a constraint on proposed microscopic models, i.e., it requires that any successful model of a reaction with a convex Arrhenius plot should be consistent with the microcanonical rate coefficient being a decreasing function of energy. The implications and limitations of this analysis to interpreting enzyme mechanisms are discussed. This model-independent conclusion has broad applicability to all fields of kinetics, and we also draw attention to an analogy with diffusion in metastable fluids and glasses. PMID:11158559

Master plot analysis of microcracking in graphite/epoxy and graphite/PEEK laminates

NASA Technical Reports Server (NTRS)

Nairn, John A.; Hu, Shoufeng; Bark, Jong Song

1993-01-01

We used a variational stress analysis and an energy release rate failure criterion to construct a master plot analysis of matrix microcracking. In the master plot, the results for all laminates of a single material are predicted to fall on a single line whose slope gives the microcracking toughness of the material. Experimental results from 18 different layups of AS4/3501-6 laminates show that the master plot analysis can explain all observations. In particular, it can explain the differences between microcracking of central 90 deg plies and of free-surface 90 deg plies. Experimental results from two different AS4/PEEK laminates tested at different temperatures can be explained by a modified master plot that accounts for changes in the residual thermal stresses. Finally, we constructed similar master plot analyses for previous literature microcracking models. All microcracking theories that ignore the thickness dependence of the stresses gave poor results.

Plotting Rates of Photosynthesis as a Function of Light Quantity.

ERIC Educational Resources Information Center

Dean, Rob L.

1996-01-01

Discusses methods for plotting rates of photosynthesis as a function of light quantity. Presents evidence that suggests that empirically derived conversion factors, which are used to convert foot candles to photon fluence rates, should be used with extreme caution. Suggests how rate data are best plotted when any kind of light meter is not…

An Intuitive Graphical Approach to Understanding the Split-Plot Experiment

ERIC Educational Resources Information Center

Robinson, Timothy J.; Brenneman, William A.; Myers, William R.

2009-01-01

While split-plot designs have received considerable attention in the literature over the past decade, there seems to be a general lack of intuitive understanding of the error structure of these designs and the resulting statistical analysis. Typically, students learn the proper error terms for testing factors of a split-plot design via "expected…

magicaxis: Pretty scientific plotting with minor-tick and log minor-tick support

NASA Astrophysics Data System (ADS)

Robotham, Aaron S. G.

2016-04-01

The R suite magicaxis makes useful and pretty plots for scientific plotting and includes functions for base plotting, with particular emphasis on pretty axis labelling in a number of circumstances that are often used in scientific plotting. It also includes functions for generating images and contours that reflect the 2D quantile levels of the data designed particularly for output of MCMC posteriors where visualizing the location of the 68% and 95% 2D quantiles for covariant parameters is a necessary part of the post MCMC analysis, can generate low and high error bars, and allows clipping of values, rejection of bad values, and log stretching.

Linear scaling relationships and volcano plots in homogeneous catalysis - revisiting the Suzuki reaction.

PubMed

Busch, Michael; Wodrich, Matthew D; Corminboeuf, Clémence

2015-12-01

Linear free energy scaling relationships and volcano plots are common tools used to identify potential heterogeneous catalysts for myriad applications. Despite the striking simplicity and predictive power of volcano plots, they remain unknown in homogeneous catalysis. Here, we construct volcano plots to analyze a prototypical reaction from homogeneous catalysis, the Suzuki cross-coupling of olefins. Volcano plots succeed both in discriminating amongst different catalysts and reproducing experimentally known trends, which serves as validation of the model for this proof-of-principle example. These findings indicate that the combination of linear scaling relationships and volcano plots could serve as a valuable methodology for identifying homogeneous catalysts possessing a desired activity through a priori computational screening.

[Migration to metropolitan Mexico City].

PubMed

Cantu Gutierrez, J J; Luque Gonzalez, R

1990-01-01

Accelerated urbanization, especially after 1940, has been among the great transformations in Mexico associated with rapid and sustained economic growth during 1950-80. The urbanization process was highly selective, favoring in particular Mexico City, Guadalajara, and Monterey, which together contain about 25% of Mexico¿s total population. Metropolitan Mexico City alone contained around 18.2% of the total 1990 population on 0.2% of Mexico¿s land area. Mexico City¿s population grew at an average annual rate of 4.2%, from 1.6 million in 1940 to 14.8 million in 1990, largely due to in-migration. Migrants and their reproduction are estimated to have accounted for 51.2% of Mexico City¿s growth since 1940, and physical expansion of the metropolitan zone for another 5.7%. Slightly over 80% of migrants come from 10 states that are mostly rural, relatively densely populated, not distant, and below average in living levels. Women predominate slightly. Nearly half of migrants are aged 15-29 years on arrival. The proportion with no more than primary education is higher than that of Mexico City natives, but the proportion with post-secondary education is similar. Pollution, lack of public safety, and other urban problems will probably combine to discourage migration to Mexico City in the future and encourage departures to less difficult cities.

Propagules of arbuscular mycorrhizal fungi in a secondary dry forest of Oaxaca, Mexico.

PubMed

Guadarrama, Patricia; Castillo-Argüero, Silvia; Ramos-Zapata, José A; Camargo-Ricalde, Sara L; Alvarez-Sánchez, Javier

2008-03-01

Plant cover loss due to changes in land use promotes a decrease in spore diversity of arbuscular mycorrhizal fungi (AMF), viable mycelium and, therefore, in AMF colonization, this has an influence in community diversity and, as a consequence, in its recovery. To evaluate different AMF propagules, nine plots in a tropical dry forest with secondary vegetation were selected: 0, 1, 7, 10, 14, 18, 22, 25, and 27 years after abandonment in Nizanda, Oaxaca, Mexico. The secondary vegetation with different stages of development is a consequence of slash and burn agriculture, and posterior abandonment. Soil samples (six per plot) were collected and percentage of AMF field colonization, extrarradical mycelium, viable spore density, infectivity and most probable number (MPN) ofAMF propagules were quantified through a bioassay. Means for field colonization ranged between 40% and 70%, mean of total mycelium length was 15.7 +/- 1.88 mg(-1) dry soil, with significant differences between plots; however, more than 40% of extracted mycelium was not viable, between 60 and 456 spores in 100 g of dry soil were recorded, but more than 64% showed some kind of damage. Infectivity values fluctuated between 20% and 50%, while MPN showed a mean value of 85.42 +/- 44.17 propagules (100 g dry soil). We conclude that secondary communities generated by elimination of vegetation with agricultural purposes in a dry forest in Nizanda do not show elimination of propagules, probably as a consequence of the low input agriculture practices in this area, which may encourage natural regeneration.

CASPER: A GENERALIZED PROGRAM FOR PLOTTING AND SCALING DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lietzke, M.P.; Smith, R.E.

A Fortran subroutine was written to scale floating-point data and generate a magnetic tape to plot it on the Calcomp 570 digital plotter. The routine permits a great deal of flexibility, and may be used with any type of FORTRAN or FAP calling program. A simple calling program was also written to permit the user to read in data from cards and plot it without any additional programming. Both the Fortran and binary decks are available. (auth)

In-situ polymerization PLOT columns I: divinylbenzene

NASA Technical Reports Server (NTRS)

Shen, T. C.

1992-01-01

A novel method for preparation of porous-layer open-tubular (PLOT) columns is described. The method involves a simple and reproducible, straight-forward in-situ polymerization of monomer directly on the metal tube.

Consistency of patterns in concentration‐discharge plots

USGS Publications Warehouse

Chanat, Jeffrey G.; Rice, Karen C.; Hornberger, George M.

2002-01-01

Concentration‐discharge (c‐Q) plots have been used to infer how flow components such as event water, soil water, and groundwater mix to produce the observed episodic hydrochemical response of small catchments. Because c‐Q plots are based only on observed streamflow and solute concentration, their interpretation requires assumptions about the relative volume, hydrograph timing, and solute concentration of the streamflow end‐members. Evans and Davies [1998] present a taxonomy of c‐Q loops resulting from three‐component conservative mixing. Their analysis, based on a fixed template of end‐member hydrograph volume, timing, and concentration, suggests a unique relationship between c‐Q loop form and the rank order of end‐member concentrations. Many catchments exhibit variability in component contributions to storm flow in response to antecedent conditions or rainfall characteristics, but the effects of such variation on c‐Q relationships have not been studied systematically. Starting with a “baseline” condition similar to that assumed by Evans and Davies [1998], we use a simple computer model to characterize the variability in c‐Q plot patterns resulting from variation in end‐member volume, timing, and solute concentration. Variability in these three factors can result in more than one c‐Q loop shape for a given rank order of end‐member solute concentrations. The number of resulting hysteresis patterns and their relative frequency depends on the rank order of solute concentrations and on their separation in absolute value. In ambiguous cases the c‐Q loop shape is determined by the relative “prominence” of the event water versus soil water components. This “prominence” is broadly defined as a capacity to influence the total streamflow concentration and may result from a combination of end‐member volume, timing, or concentration. The modeling results indicate that plausible hydrological variability in field situations can

Mexico Country Analysis Brief

EIA Publications

2016-01-01

Mexico is one of the largest producers of petroleum and other liquids in the world. Mexico is also the fourth-largest producer in the Americas after the United States, Canada, and Brazil, and an important partner in U.S. energy trade. In 2015, Mexico accounted for 688,000 barrels per day (b/d), or 9%, of U.S. crude oil imports.

PLOT3D/AMES, GENERIC UNIX VERSION USING DISSPLA (WITH TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

PLOT3D/AMES, GENERIC UNIX VERSION USING DISSPLA (WITHOUT TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

Plotting landscape perspectives of clearcut units.

Treesearch

Roger H. Twito

1978-01-01

The aesthetics of clearcut units potentially visible from a distance can be improved by judicious design. Screening clearcuts from view or shaping them to characterize natural openings are current methods used for this purpose. Perspective plots illustrating how proposed clearcut units will look from specific off-site viewing points provide an...

Influence of tree spatial pattern and sample plot type and size on inventory

Treesearch

John-Pascall Berrill; Kevin L. O' Hara

2012-01-01

Sampling with different plot types and sizes was simulated using tree location maps and data collected in three even-aged coast redwood (Sequoia sempervirens) stands selected to represent uniform, random, and clumped spatial patterns of tree locations. Fixed-radius circular plots, belt transects, and variable-radius plots were installed by...

Using volcano plots and regularized-chi statistics in genetic association studies.

PubMed

Li, Wentian; Freudenberg, Jan; Suh, Young Ju; Yang, Yaning

2014-02-01

Labor intensive experiments are typically required to identify the causal disease variants from a list of disease associated variants in the genome. For designing such experiments, candidate variants are ranked by their strength of genetic association with the disease. However, the two commonly used measures of genetic association, the odds-ratio (OR) and p-value may rank variants in different order. To integrate these two measures into a single analysis, here we transfer the volcano plot methodology from gene expression analysis to genetic association studies. In its original setting, volcano plots are scatter plots of fold-change and t-test statistic (or -log of the p-value), with the latter being more sensitive to sample size. In genetic association studies, the OR and Pearson's chi-square statistic (or equivalently its square root, chi; or the standardized log(OR)) can be analogously used in a volcano plot, allowing for their visual inspection. Moreover, the geometric interpretation of these plots leads to an intuitive method for filtering results by a combination of both OR and chi-square statistic, which we term "regularized-chi". This method selects associated markers by a smooth curve in the volcano plot instead of the right-angled lines which corresponds to independent cutoffs for OR and chi-square statistic. The regularized-chi incorporates relatively more signals from variants with lower minor-allele-frequencies than chi-square test statistic. As rare variants tend to have stronger functional effects, regularized-chi is better suited to the task of prioritization of candidate genes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Gulf of Mexico

Atmospheric Science Data Center

2014-05-15

article title:  Continued Spread of Gulf of Mexico Oil Slick       View ... passed over the Deepwater Horizon oil slick in the Gulf of Mexico on May 8, 2010, at approximately 16:50 UTC (11:50 a.m. local time), then ...

Mexico: Rasgos de Su Historia. (Mexico: Highlights of Its History).

ERIC Educational Resources Information Center

Orozco, Cecilio

Intended for both teachers and students, this publication, written in Spanish, briefly traces Mexico's history from its Conquest in 1519 to the overthrow of Porfirio Diaz in 1910. The following are briefly discussed: Mexico's Conquest in 1519; events immediately after the fall of Tenochtitlan; the War for Independence; Texas' separation from…

Representing Uncertainty on Model Analysis Plots

ERIC Educational Resources Information Center

Smith, Trevor I.

2016-01-01

Model analysis provides a mechanism for representing student learning as measured by standard multiple-choice surveys. The model plot contains information regarding both how likely students in a particular class are to choose the correct answer and how likely they are to choose an answer consistent with a well-documented conceptual model.…

A Guided Inquiry on Hubble Plots and the Big Bang

NASA Astrophysics Data System (ADS)

Forringer, Ted

2014-04-01

In our science for non-science majors course "21st Century Physics," we investigate modern "Hubble plots" (plots of velocity versus distance for deep space objects) in order to discuss the Big Bang, dark matter, and dark energy. There are two potential challenges that our students face when encountering these topics for the first time. The first challenge is in understanding and interpreting Hubble plots. The second is that some of our students have religious or cultural objections to the concept of a "Big Bang" or a universe that is billions of years old. This paper presents a guided inquiry exercise that was created with the goal of introducing students to Hubble plots and giving them the opportunity to discover for themselves why we believe our universe started with an explosion billions of years ago. The exercise is designed to be completed before the topics are discussed in the classroom. We did the exercise during a one hour and 45 minute "lab" time and it was done in groups of three or four students, but it would also work as an individual take-home assignment.

78 FR 14983 - Fisheries of the Gulf of Mexico; Gulf of Mexico Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-08

... the Gulf of Mexico; Gulf of Mexico Fishery Management Council; Public Meeting AGENCY: National Marine... of Gulf of Mexico Fishery Management Council Spanish Mackerel and Cobia Stock Assessment Review Workshop. SUMMARY: Independent peer review of Gulf of Mexico Spanish Mackerel and Cobia stocks will be...

IMS/Satellite Situation Center report: Predicted orbit plots for IMP-J-1976

NASA Technical Reports Server (NTRS)

1975-01-01

Predicted orbit plots for the IMP-J satellite were given for the time period January-December 1976. These plots are shown in three projections. The time period covered by each set of projections is 12 days and 6 hours, corresponding approximately to the period of IMP-J. The three coordinate systems used are the Geocentric Solar Ecliptic system (GSE), the Geocentric Solar Magnetospheric system (GSM), and the Solar Magnetic system (SM). For each of the three projections, time ticks and codes are given on the satellite trajectories. The codes are interpreted in the table at the base of each plot. Time is given in the table as year/day/decimal hour, and the total time covered by each plot is shown at the bottom of each table.

Binational Teacher Development: Teacher Ambassador Exchange Program, New Mexico, USA and Nuevo Leon, Mexico.

ERIC Educational Resources Information Center

Habermann, Mary Jean

The report describes the rationale for and history of an exchange program for Nuevo Leon (Mexico) and New Mexico bilingual education teachers. The program evolved from the need to help Spanish-speaking students maintain their own language and culture while in the United States. New Mexico's state policy concerning language-minority children and…

Split-plot microarray experiments: issues of design, power and sample size.

PubMed

Tsai, Pi-Wen; Lee, Mei-Ling Ting

2005-01-01

This article focuses on microarray experiments with two or more factors in which treatment combinations of the factors corresponding to the samples paired together onto arrays are not completely random. A main effect of one (or more) factor(s) is confounded with arrays (the experimental blocks). This is called a split-plot microarray experiment. We utilise an analysis of variance (ANOVA) model to assess differentially expressed genes for between-array and within-array comparisons that are generic under a split-plot microarray experiment. Instead of standard t- or F-test statistics that rely on mean square errors of the ANOVA model, we use a robust method, referred to as 'a pooled percentile estimator', to identify genes that are differentially expressed across different treatment conditions. We illustrate the design and analysis of split-plot microarray experiments based on a case application described by Jin et al. A brief discussion of power and sample size for split-plot microarray experiments is also presented.

Emma Lucy Braun's forest plots in eastern North America.

PubMed

Ricklefs, Robert E

2018-02-01

Relative abundances of tree species are presented for the 348 forest plots described in E. Lucy Braun's (1950) book, Deciduous Forests of Eastern North America (Hafner, New York, facsimile reprint 1972). Information about the plots includes forest type, location with latitude and longitude, WorldClim climate variables, and sources of original studies where applicable. No copyright restrictions are associated with the use of this data set. Please cite this article when the data are used in other publications. © 2017 by the Ecological Society of America.

NPLOT: an Interactive Plotting Program for NASTRAN Finite Element Models

NASA Technical Reports Server (NTRS)

Jones, G. K.; Mcentire, K. J.

1985-01-01

The NPLOT (NASTRAN Plot) is an interactive computer graphics program for plotting undeformed and deformed NASTRAN finite element models. Developed at NASA's Goddard Space Flight Center, the program provides flexible element selection and grid point, ASET and SPC degree of freedom labelling. It is easy to use and provides a combination menu and command driven user interface. NPLOT also provides very fast hidden line and haloed line algorithms. The hidden line algorithm in NPLOT proved to be both very accurate and several times faster than other existing hidden line algorithms. A fast spatial bucket sort and horizon edge computation are used to achieve this high level of performance. The hidden line and the haloed line algorithms are the primary features that make NPLOT different from other plotting programs.

Comparison of combinations of sighting devices and target objects for establishing circular plots in the field

Treesearch

Sylvio Mannel; Mark A. Rumble; Maribeth Price; Thomas M. Juntti; Dong Hua

2006-01-01

Many aspects of ecological research require measurement of characteristics within plots. Often, the time spent establishing plots is small relative to the time spent collecting and recording data. However, some studies require larger numbers of plots, where the time spent establishing the plot is consequential to the field effort. In open habitats, circular plots are...

A computer program for obtaining airplane configuration plots from digital Datcom input data

NASA Technical Reports Server (NTRS)

Roy, M. L.; Sliwa, S. M.

1983-01-01

A computer program is described which reads the input file for the Stability and Control Digital Datcom program and generates plots from the aircraft configuration data. These plots can be used to verify the geometric input data to the Digital Datcom program. The program described interfaces with utilities available for plotting aircraft configurations by creating a file from the Digital Datcom input data.

The influence of fipronil on Reticulitermes flavipes (Isoptera: Rhinotermitidae) feeding beyond treated plots

Treesearch

Thomas Shelton

2013-01-01

A small-plot field trial was conducted to examine the area of influence of fipronil at incremental distances away from treated plots on the Harrison Experimental Forest near Saucier, MS. Small treated (water and fipronil) plots were surrounded by untreated wooden boards in an eight-point radial pattern, and examined for evidence of termite feeding every 60 d for 1 yr...

9 CFR 93.427 - Cattle from Mexico.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Cattle from Mexico. 93.427 Section 93... CONVEYANCE AND SHIPPING CONTAINERS Ruminants Mexico 10 § 93.427 Cattle from Mexico. (a) Cattle and other ruminants imported from Mexico, except animals being transported in bond for immediate return to Mexico or...

Plots, pixels, and partnerships: prospects for mapping, monitoring and modeling biodiversity.

Treesearch

H. Gyde Lund; Victor A. Rudis; Kenneth W. Stolte

1998-01-01

Many biodiversity inventories are conducted in relatively small areas, yet information is needed at the national, regional, and global levels.Most nations have forest inventory plot networks.While forest inventories may not contain the detailed species information that biodiversity inventories do, the forest inventory plot networks do represent large areas.Linkages...

Rainfall–runoff model parameter estimation and uncertainty evaluation on small plots

EPA Science Inventory

Four seasonal rainfall simulations in 2009 and 2010were applied to a field containing 36 plots (0.75 × 2 m each), resulting in 144 runoff events. In all simulations, a constant rate of rainfall was applied then halted 60min after initiation of runoff, with plot-scale monitoring o...

On-Line 1D and 2D PLOT/LC-ESI-MS Using 10 μm i.d. Poly(styrene–divinylbenzene) Porous Layer Open Tubular (PLOT) Columns For Ultrasensitive Proteomic Analysis

PubMed Central

Luo, Quanzhou; Yue, Guihua; Valaskovic, Gary A; Gu, Ye; Wu, Shiaw-Lin; Karger, Barry L.

2008-01-01

Following on our recent work, on-line one dimensional (1D) and two dimensional (2D) PLOT/LC-ESI-MS platforms using 3.2 m × 10 μm i.d. poly(styrenedivinylbenzene) (PS-DVB) porous layer open tubular (PLOT) columns have been developed to provide robust, high performance and ultrasensitive proteomic analysis. Using a PicoClear tee, the dead volume connection between a 50 μm i.d. PS-DVB monolithic microSPE column and the PLOT column was minimized. The microSPE/PLOT column assembly provided a separation performance similar to that obtained with direct injection onto the PLOT column at a mobile phase flow rate of 20 nL/min. The trace analysis potential of the platform was evaluated using an in-gel tryptic digest sample of a gel fraction (15 to 40 kDa) of a cervical cancer (SiHa) cell line. As an example of the sensitivity of the system, ∼2.5 ng of protein in 2 μL solution, an amount corresponding to 20 SiHa cells, was subjected to on-line microSPE-PLOT/LC-ESIMS/MS analysis using a linear ion trap MS. 237 peptides associated with 163 unique proteins were identified from a single analysis when using stringent criteria associated with a false positive rate less than 1% . The number of identified peptides and proteins increased to 638 and 343, respectively, as the injection amount was raised to ∼45 ng of protein, an amount corresponding to 350 SiHa cells. In comparison, only 338 peptides and 231 unique proteins were identified (false positive rate again less than 1%) from 750 ng of protein from the identical gel fraction, an amount corresponding to 6000 SiHa cells, using a typical 15 cm × 75 μm i.d. packed capillary column. The greater sensitivity, higher recovery, and higher resolving power of the PLOT column resulted in the increased number of identifications from only ∼5% of the injected sample amount. The resolving power of the microSPE/PLOT assembly was further extended by 2D chromatography via combination of the high-efficiency reversed phase PLOT column

21 CFR 808.81 - New Mexico.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false New Mexico. 808.81 Section 808.81 Food and Drugs... and Local Exemptions § 808.81 New Mexico. The following New Mexico medical device requirement is... from preemption under section 521(b) of the act: New Mexico Statutes Annotated, section 67-36-16(F...

21 CFR 808.81 - New Mexico.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false New Mexico. 808.81 Section 808.81 Food and Drugs... and Local Exemptions § 808.81 New Mexico. The following New Mexico medical device requirement is... from preemption under section 521(b) of the act: New Mexico Statutes Annotated, section 67-36-16(F...

21 CFR 808.81 - New Mexico.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false New Mexico. 808.81 Section 808.81 Food and Drugs... and Local Exemptions § 808.81 New Mexico. The following New Mexico medical device requirement is... from preemption under section 521(b) of the act: New Mexico Statutes Annotated, section 67-36-16(F...

21 CFR 808.81 - New Mexico.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false New Mexico. 808.81 Section 808.81 Food and Drugs... and Local Exemptions § 808.81 New Mexico. The following New Mexico medical device requirement is... from preemption under section 521(b) of the act: New Mexico Statutes Annotated, section 67-36-16(F...

21 CFR 808.81 - New Mexico.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false New Mexico. 808.81 Section 808.81 Food and Drugs... and Local Exemptions § 808.81 New Mexico. The following New Mexico medical device requirement is... from preemption under section 521(b) of the act: New Mexico Statutes Annotated, section 67-36-16(F...

Mexico City, Mexico as seen from STS-62

NASA Image and Video Library

1994-03-05

STS062-84-028 (4-18 March 1994) --- According to NASA scientists this image is the clearest photo of Mexico City taken from United States manned spacecraft. North is to the upper right. Mexico City sits in a basin surrounded by large volcanoes. The restricted atmospheric circulation in the basin, coupled with the inevitable air emissions produced by a city of 20 million people has created a critical air pollution problem for the city. In most photographs of the region, Mexico City is obscured by haze. Scientists feel the clear atmosphere in this photograph may be due, in part, to the stringent air emission restrictions now in place. The clarity of the photograph allows many key cultural features to be identified, including all of the major boulevards, the horse track (western part of the city), the university (south of the city), and the museum areas. Large, man-made ponds east of the city also stand out.

Experimental strategies in carrying out VCU for tobacco crop I: plot design and size.

PubMed

Toledo, F H R B; Ramalho, M A P; Pulcinelli, C E; Bruzi, A T

2013-09-19

We aimed to establish standards for tobacco Valor de Cultivo e Uso (VCU) in Brazil. We obtained information regarding the size and design of plots of two varietal groups of tobacco (Virginia and Burley). Ten inbred lines of each varietal group were evaluated in a randomized complete block design with four replications. The plot contained 42 plants with six rows of seven columns each. For each experiment plant, considering the position of the respective plant in the plot (row and column) as a reference, cured leaf weight (g/plant), total sugar content (%), and total alkaloid content (%) were determined. The maximum curvature of the variations in coefficients was estimated. Trials with the number of plants per plot ranging from 2 to 41 were simulated. The use of a border was not justified because the interactions between inbred lines x position in the plots were never significant, showing that the behavior of the inbred lines coincided with the different positions. The plant performance varied according to the column position in the plot. To lessen the effect of this factor, the use of plots with more than one row is recommended. Experimental precision, evaluated by the CV%, increased with an increase in plot size; nevertheless, the maximum curvature of the variation coefficient method showed no expressive increase in precision if the number of plants was greater than seven. The result in identification of the best inbred line, in terms of the size of each plot, coincided with the maximum curvature method.

Confidence limits for contribution plots in multivariate statistical process control using bootstrap estimates.

PubMed

Babamoradi, Hamid; van den Berg, Frans; Rinnan, Åsmund

2016-02-18

In Multivariate Statistical Process Control, when a fault is expected or detected in the process, contribution plots are essential for operators and optimization engineers in identifying those process variables that were affected by or might be the cause of the fault. The traditional way of interpreting a contribution plot is to examine the largest contributing process variables as the most probable faulty ones. This might result in false readings purely due to the differences in natural variation, measurement uncertainties, etc. It is more reasonable to compare variable contributions for new process runs with historical results achieved under Normal Operating Conditions, where confidence limits for contribution plots estimated from training data are used to judge new production runs. Asymptotic methods cannot provide confidence limits for contribution plots, leaving re-sampling methods as the only option. We suggest bootstrap re-sampling to build confidence limits for all contribution plots in online PCA-based MSPC. The new strategy to estimate CLs is compared to the previously reported CLs for contribution plots. An industrial batch process dataset was used to illustrate the concepts. Copyright © 2016 Elsevier B.V. All rights reserved.

Exploration of the forbidden regions of the Ramachandran plot (ϕ-ψ) with QTAIM.

PubMed

Momen, Roya; Azizi, Alireza; Wang, Lingling; Ping, Yang; Xu, Tianlv; Kirk, Steven R; Li, Wenxuan; Manzhos, Sergei; Jenkins, Samantha

2017-10-04

A new QTAIM interpretation of the Ramachandran plot is formulated from the most and least facile eigenvectors of the second-derivative matrix of the electron density with a set of 29 magainin-2 peptide conformers. The presence of QTAIM eigenvectors associated with the most and least preferred directions of electronic charge density explained the role of hydrogen bonding, HH contacts and the glycine amino acid monomer in peptide folding. The highest degree of occupation of the QTAIM interpreted Ramachandran plot was found for the glycine amino acid monomer compared with the remaining backbone peptide bonds. The mobility of the QTAIM eigenvectors of the glycine amino acid monomer was higher than for the other amino acids and was comparable to that of the hydrogen bonding, explaining the flexibility of the magainin-2 backbone. We experimented with a variety of hybrid QTAIM-Ramachandran plots to highlight and explain why the glycine amino acid monomer largely occupies the 'forbidden' region on the Ramachandran plot. In addition, the new hybrid QTAIM-Ramachandran plots contained recognizable regions that can be associated with concepts familiar from the conventional Ramachandran plot whilst retaining the character of the QTAIM most and least preferred regions.

9 CFR 108.7 - Filing of plot plans, blueprints, and legends.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Filing of plot plans, blueprints, and legends. 108.7 Section 108.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.7 Filing of plot plans, blueprints, and legends. Three copies of...

Rainfall-runoff model parameter estimation and uncertainty evaluation on small plots

USDA-ARS?s Scientific Manuscript database

Four seasonal rainfall simulations in 2009 and 2010 were applied to a field containing 36 plots (0.75 × 2 m each), resulting in 144 runoff events. In all simulations, a constant rate of rainfall was applied, then halted 60 minutes after initiation of runoff, with plot-scale monitoring of runoff ever...

Spatial and Temporal Distribution of Tuberculosis in the State of Mexico, Mexico

PubMed Central

Zaragoza Bastida, Adrian; Hernández Tellez, Marivel; Bustamante Montes, Lilia P.; Medina Torres, Imelda; Jaramillo Paniagua, Jaime Nicolás; Mendoza Martínez, Germán David; Ramírez Durán, Ninfa

2012-01-01

Tuberculosis (TB) is one of the oldest human diseases that still affects large population groups. According to the World Health Organization (WHO), there were approximately 9.4 million new cases worldwide in the year 2010. In Mexico, there were 18,848 new cases of TB of all clinical variants in 2010. The identification of clusters in space-time is of great interest in epidemiological studies. The objective of this research was to identify the spatial and temporal distribution of TB during the period 2006–2010 in the State of Mexico, using geographic information system (GIS) and SCAN statistics program. Nine significant clusters (P < 0.05) were identified using spatial and space-time analysis. The conclusion is that TB in the State of Mexico is not randomly distributed but is concentrated in areas close to Mexico City. PMID:22919337

Immunization Coverage and Medicaid Managed Care in New Mexico: A Multimethod Assessment

PubMed Central

Schillaci, Michael A.; Waitzkin, Howard; Carson, E. Ann; López, Cynthia M.; Boehm, Deborah A.; López, Leslie A.; Mahoney, Sheila F.

2004-01-01

BACKGROUND We wanted to examine the association between Medicaid managed care (MMC) and changing immunization coverage in New Mexico, a predominantly rural, poor, and multiethnic state. METHODS As part of a multimethod assessment of MMC, we studied trends in quantitative data from the National Immunization Survey (NIS) using temporal plots, Fisher’s exact test, and the Cochran-Armitage trend test. To help explain changes in immunization rates in relation to MMC, we analyzed qualitative data gathered through ethnographic observations at safety net institutions: income support (welfare) offices, community health centers, hospital emergency departments, private physicians’ offices, mental health institutions, managed care organizations, and agencies of state government. RESULTS Immunization coverage decreased significantly after implementation of MMC, from 80% in 1996 to 73% in 2001 for the 4:3:1 vaccination series (Fisher’s exact test, P = .031). New Mexico dropped in rank among states from 30th for this vaccination series in 1996 to 50th in 2001. A significant decreasing trend (Cochran-Armitage P = .025) in coverage occurred between 1996 and 2001. Findings from the ethnographic study revealed conditions that might have contributed to decreased immunization coverage: (1) reduced funding for immunizations at public health clinics, and difficulties in gaining access to MMC providers; (2) informal referrals from managed care organizations and contracting physicians to community health centers and state-run public health clinics; and (3) increased workloads and delays at community health centers, linked partly to these informal referrals for immunizations. CONCLUSIONS Medicaid reform in New Mexico did not improve immunization coverage, which declined significantly to among the lowest in the nation. Reduced funding for public health clinics and informal referrals may have contributed to this decline. These observations show how unanticipated and adverse consequences

Combining FIA plot data with topographic variables: Are precise locations needed?

Treesearch

Stephen P. Prisley; Huei-Jin Wang; Philip J Radtke; John Coulston

2009-01-01

Plot data from the USFS FIA program could be combined with terrain variables to attempt to explain how terrain characteristics influence forest growth, species composition, productivity, fire behavior, wildlife habitat, and other phenomena. While some types of analyses using FIA data have been shown to be insensitive to precision of plot locations, it has been...

76 FR 64248 - Gulf of Mexico Reef Fish Fishery; Closure of the 2011 Gulf of Mexico Commercial Sector for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

.... 040205043-4043-01] RIN 0648-XA766 Gulf of Mexico Reef Fish Fishery; Closure of the 2011 Gulf of Mexico... the commercial sector for greater amberjack in the exclusive economic zone (EEZ) of the Gulf of Mexico... Reef Fish Resources of the Gulf of Mexico (FMP). The FMP was prepared by the Gulf of Mexico Fishery...

shinyCircos: an R/Shiny application for interactive creation of Circos plot.

PubMed

Yu, Yiming; Ouyang, Yidan; Yao, Wen

2018-04-01

Creation of Circos plot is one of the most efficient approaches to visualize genomic data. However, the installation and use of existing tools to make Circos plot are challenging for users lacking of coding experiences. To address this issue, we developed an R/Shiny application shinyCircos, a graphical user interface for interactive creation of Circos plot. shinyCircos can be easily installed either on computers for personal use or on local or public servers to provide online use to the community. Furthermore, various types of Circos plots could be easily generated and decorated with simple mouse-click. shinyCircos and its manual are freely available at https://github.com/venyao/shinyCircos. shinyCircos is deployed at https://yimingyu.shinyapps.io/shinycircos/ and http://shinycircos.ncpgr.cn/ for online use. diana1983941@mail.hzau.edu.cn or yaowen@henau.edu.cn.

An analysis of mortality inventory tally using large plots compared to tally using small plot clusters

Treesearch

Vernon J. LaBau; John W. Hazard

2000-01-01

During an inventory to assess spruce bark beetle impact on the Kenai Peninsula in south-central Alaska, 5-year mortality estimates were made for all growing-stock trees on 0.6 ha areas, on 0.4 ha areas, and on a cluster of four 1/60-ha subplots. The analysis of the results of the comparison between cluster data and the larger plot data highlighted some of the problems...

40 CFR 81.332 - New Mexico.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., the New Mexico-Mexico international line on the south, the Range 3E-Range 2E line on the west, and the... line on the south, the Range 3E-Range 2E line on the west, and the N3200 latitude line on the north..., New Mexico-Mexico international line on the south, the range 3E-Range 2E line on the west, and the...

Programming Details for MDPLOT: A Program for Plotting Multi-Dimensional Data

Treesearch

W.L. Nance; B.H. Polmer; G.C. Keith

1975-01-01

The program is written in ASA FORTRAN IV and consists of the main program (MAIN) with 14 subroutines. Subroutines SETUP, PLOT, GRID, SCALE, and 01s are microfilm-dependent and therefore must be replaced with the equivalent routines written for the high resolution plotting device available at the user's installation. The calls to these subroutines are flagged...

Estimating number and size of forest patches from FIA plot data

Treesearch

Mark D. Nelson; Andrew J. Lister; Mark H. Hansen

2009-01-01

Forest inventory and analysis (FIA) annual plot data provide for estimates of forest area, type, volume, growth, and other attributes. Estimates of forest landscape metrics, such as those describing abundance, size, and shape of forest patches, however, typically are not derived from FIA plot data but from satellite image-based land cover maps. Associating image-based...

Faunistic patterns of leaf beetles (Coleoptera, Chrysomelidae) within elevational and temporal gradients in Sierra de San Carlos, Mexico

PubMed Central

Sánchez-Reyes, Uriel Jeshua; Niño-Maldonado, Santiago; Barrientos-Lozano, Ludivina; Clark, Shawn M.; Jones, Robert W.

2016-01-01

Abstract The study of biodiversity of Chrysomelidae in Mexico and its variation within ecological gradients has increased recently, although important areas in the country remain to be explored. We conducted a faunistic inventory and analyzed the elevational and temporal variation of leaf beetle communities in the Sierra de San Carlos, in the state of Tamaulipas, in northeastern Mexico. This is an area with high to extreme priority for conservation, and due to its insular geographical position and to the vegetational communities present, it must be considered as a sky island. We selected seven sample sites distributed in different elevations within three localities, and comprising different vegetational communities. At each site, we randomly delimited 12 sample plots of 400 m2 where sampling was conducted by entomological sweep netting and collecting directly by hand. Sampling was conducted monthly at each plot, for a total of 1,008 samples between February 2013 and January 2014. By the end of the study, we had obtained a total of 3,081 specimens belonging to six subfamilies, 65 genera, and 113 species, with Trichaltica scabricula (Crotch, 1873) being recorded for first time in Mexico. Species richness was less than the values observed at other studies conducted in the same region, which is attributed to differences in the number of plant species and to the insular location of Sierra de San Carlos; however, the higher diversity values suggest a higher quality of natural resources and vegetational communities. No consistent pattern of leaf beetle communities was correlated with elevation, although higher values of species richness and diversity were obtained at the highest elevation site. The seasonal gradient showed that the rainy season is most favorable for leaf beetle communities. We found that species composition was different between sites and months, and also that there exists a significant association between the abundance obtained at each site and

User's manual for THPLOT, A FORTRAN 77 Computer program for time history plotting

NASA Technical Reports Server (NTRS)

Murray, J. E.

1982-01-01

A general purpose FORTRAN 77 computer program (THPLOT) for plotting time histories using Calcomp pen plotters is described. The program is designed to read a time history data file and to generate time history plots for selected time intervals and/or selected data channels. The capabilities of the program are described. The card input required to define the plotting operation is described and examples of card input and the resulting plotted output are given. The examples are followed by a description of the printed output, including both normal output and error messages. Lastly, implementation of the program is described. A complete listing of the program with reference maps produced by the CDC FTN 5.0 compiler is included.

Design criteria and eigensequence plots for satellite computed tomography

NASA Technical Reports Server (NTRS)

Wahba, G.

1983-01-01

The use of the degrees of freedom for signal is proposed as a design criteria for comparing different designs for satellite and other measuring systems. It is also proposed that certain eigensequence plots be examined at the design stage along with appropriate estimates of the parameter lambda playing the role of noise to signal ratio. The degrees of freedom for signal and the eigensequence plots may be determined using prior information in the spectral domain which is presently available along with a description of the system, and simulated data for estimating lambda. This work extends the 1972 work of Weinreb and Crosby.

Design criteria and eigensequence plots for satellite computed tomography

NASA Astrophysics Data System (ADS)

Wahba, G.

1983-11-01

The use of the degrees of freedom for signal is proposed as a design criteria for comparing different designs for satellite and other measuring systems. It is also proposed that certain eigensequence plots be examined at the design stage along with appropriate estimates of the parameter lambda playing the role of noise to signal ratio. The degrees of freedom for signal and the eigensequence plots may be determined using prior information in the spectral domain which is presently available along with a description of the system, and simulated data for estimating lambda. This work extends the 1972 work of Weinreb and Crosby.

Encounters with neighbours : current developments of concepts based on recurrence plots and their applications

NASA Astrophysics Data System (ADS)

Marwan, Norbert

2003-09-01

In this work, different aspects and applications of the recurrence plot analysis are presented. First, a comprehensive overview of recurrence plots and their quantification possibilities is given. New measures of complexity are defined by using geometrical structures of recurrence plots. These measures are capable to find chaos-chaos transitions in processes. Furthermore, a bivariate extension to cross recurrence plots is studied. Cross recurrence plots exhibit characteristic structures which can be used for the study of differences between two processes or for the alignment and search for matching sequences of two data series. The selected applications of the introduced techniques to various kind of data demonstrate their ability. Analysis of recurrence plots can be adopted to the specific problem and thus opens a wide field of potential applications. Regarding the quantification of recurrence plots, chaos-chaos transitions can be found in heart rate variability data before the onset of life threatening cardiac arrhythmias. This may be of importance for the therapy of such cardiac arrhythmias. The quantification of recurrence plots allows to study transitions in brain during cognitive experiments on the base of single trials. Traditionally, for the finding of these transitions the averaging of a collection of single trials is needed. Using cross recurrence plots, the existence of an El Niño/Southern Oscillation-like oscillation is traced in northwestern Argentina 34,000 yrs. ago. In further applications to geological data, cross recurrence plots are used for time scale alignment of different borehole data and for dating a geological profile with a reference data set. Additional examples from molecular biology and speech recognition emphasize the suitability of cross recurrence plots. Diese Arbeit beschäftigt sich mit verschiedenen Aspekten und Anwendungen von Recurrence Plots. Nach einer Übersicht über Methoden, die auf Recurrence Plots basieren, werden neue

First report of Stegomyia aegypti (= Aedes aegypti) in Mexico City, Mexico.

PubMed

Kuri-Morales, P; Correa-Morales, F; González-Acosta, C; Sánchez-Tejeda, G; Dávalos-Becerril, E; Fernanda Juárez-Franco, M; Díaz-Quiñonez, A; Huerta-Jimenéz, H; Mejía-Guevara, M D; Moreno-García, M; González-Roldán, J F

2017-06-01

Stegomyia aegypti (= Aedes aegypti) (Diptera: Culicidae) is a species of mosquito that is currently widespread in Mexico. Historically, the mosquito has been distributed across most tropical and subtropical areas lower than 1700 m a.s.l. Currently, populations that are found at higher altitudes in regions with cold and dry climates suggest that these conditions do not limit the colonization and population growth of S. aegypti. During a survey of mosquitoes in September 2015, larvae of S. aegypti mosquitoes were found in two different localities in Mexico City, which is located at about 2250 m a.s.l. Mexico City is the most populous city in Mexico and has inefficient drainage and water supply systems. These factors may result in the provision of numerous larval breeding sites. Mosquito monitoring and surveillance are now priorities for the city. © 2017 The Royal Entomological Society.

Similarity-dissimilarity plot for visualization of high dimensional data in biomedical pattern classification.

PubMed

Arif, Muhammad

2012-06-01

In pattern classification problems, feature extraction is an important step. Quality of features in discriminating different classes plays an important role in pattern classification problems. In real life, pattern classification may require high dimensional feature space and it is impossible to visualize the feature space if the dimension of feature space is greater than four. In this paper, we have proposed a Similarity-Dissimilarity plot which can project high dimensional space to a two dimensional space while retaining important characteristics required to assess the discrimination quality of the features. Similarity-dissimilarity plot can reveal information about the amount of overlap of features of different classes. Separable data points of different classes will also be visible on the plot which can be classified correctly using appropriate classifier. Hence, approximate classification accuracy can be predicted. Moreover, it is possible to know about whom class the misclassified data points will be confused by the classifier. Outlier data points can also be located on the similarity-dissimilarity plot. Various examples of synthetic data are used to highlight important characteristics of the proposed plot. Some real life examples from biomedical data are also used for the analysis. The proposed plot is independent of number of dimensions of the feature space.

PLOT3D/AMES, DEC VAX VMS VERSION USING DISSPLA (WITHOUT TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P. G.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

PLOT3D/AMES, DEC VAX VMS VERSION USING DISSPLA (WITH TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

Sampling Error in Relation to Cyst Nematode Population Density Estimation in Small Field Plots.

PubMed

Župunski, Vesna; Jevtić, Radivoje; Jokić, Vesna Spasić; Župunski, Ljubica; Lalošević, Mirjana; Ćirić, Mihajlo; Ćurčić, Živko

2017-06-01

Cyst nematodes are serious plant-parasitic pests which could cause severe yield losses and extensive damage. Since there is still very little information about error of population density estimation in small field plots, this study contributes to the broad issue of population density assessment. It was shown that there was no significant difference between cyst counts of five or seven bulk samples taken per each 1-m 2 plot, if average cyst count per examined plot exceeds 75 cysts per 100 g of soil. Goodness of fit of data to probability distribution tested with χ 2 test confirmed a negative binomial distribution of cyst counts for 21 out of 23 plots. The recommended measure of sampling precision of 17% expressed through coefficient of variation ( cv ) was achieved if the plots of 1 m 2 contaminated with more than 90 cysts per 100 g of soil were sampled with 10-core bulk samples taken in five repetitions. If plots were contaminated with less than 75 cysts per 100 g of soil, 10-core bulk samples taken in seven repetitions gave cv higher than 23%. This study indicates that more attention should be paid on estimation of sampling error in experimental field plots to ensure more reliable estimation of population density of cyst nematodes.

Mars Science Laboratory Launch-Arrival Space Study: A Pork Chop Plot Analysis

NASA Technical Reports Server (NTRS)

Cianciolo, Alicia Dwyer; Powell, Richard; Lockwood, Mary Kae

2006-01-01

Launch-Arrival, or "pork chop", plot analysis can provide mission designers with valuable information and insight into a specific launch and arrival space selected for a mission. The study begins with the array of entry states for each pair of selected Earth launch and Mars arrival dates, and nominal entry, descent and landing trajectories are simulated for each pair. Parameters of interest, such as maximum heat rate, are plotted in launch-arrival space. The plots help to quickly identify launch and arrival regions that are not feasible under current constraints or technology and also provide information as to what technologies may need to be developed to reach a desired region. This paper provides a discussion of the development, application, and results of a pork chop plot analysis to the Mars Science Laboratory mission. This technique is easily applicable to other missions at Mars and other destinations.

Variable Selection Strategies for Small-area Estimation Using FIA Plots and Remotely Sensed Data

Treesearch

Andrew Lister; Rachel Riemann; James Westfall; Mike Hoppus

2005-01-01

The USDA Forest Service's Forest Inventory and Analysis (FIA) unit maintains a network of tens of thousands of georeferenced forest inventory plots distributed across the United States. Data collected on these plots include direct measurements of tree diameter and height and other variables. We present a technique by which FIA plot data and coregistered...

Crop residue decomposition in Minnesota biochar-amended plots

NASA Astrophysics Data System (ADS)

Weyers, S. L.; Spokas, K. A.

2014-06-01

Impacts of biochar application at laboratory scales are routinely studied, but impacts of biochar application on decomposition of crop residues at field scales have not been widely addressed. The priming or hindrance of crop residue decomposition could have a cascading impact on soil processes, particularly those influencing nutrient availability. Our objectives were to evaluate biochar effects on field decomposition of crop residue, using plots that were amended with biochars made from different plant-based feedstocks and pyrolysis platforms in the fall of 2008. Litterbags containing wheat straw material were buried in July of 2011 below the soil surface in a continuous-corn cropped field in plots that had received one of seven different biochar amendments or a uncharred wood-pellet amendment 2.5 yr prior to start of this study. Litterbags were collected over the course of 14 weeks. Microbial biomass was assessed in treatment plots the previous fall. Though first-order decomposition rate constants were positively correlated to microbial biomass, neither parameter was statistically affected by biochar or wood-pellet treatments. The findings indicated only a residual of potentially positive and negative initial impacts of biochars on residue decomposition, which fit in line with established feedstock and pyrolysis influences. Overall, these findings indicate that no significant alteration in the microbial dynamics of the soil decomposer communities occurred as a consequence of the application of plant-based biochars evaluated here.

Crop residue decomposition in Minnesota biochar amended plots

NASA Astrophysics Data System (ADS)

Weyers, S. L.; Spokas, K. A.

2014-02-01

Impacts of biochar application at laboratory scales are routinely studied, but impacts of biochar application on decomposition of crop residues at field scales have not been widely addressed. The priming or hindrance of crop residue decomposition could have a cascading impact on soil processes, particularly those influencing nutrient availability. Our objectives were to evaluate biochar effects on field decomposition of crop residue, using plots that were amended with biochars made from different feedstocks and pyrolysis platforms prior to the start of this study. Litterbags containing wheat straw material were buried below the soil surface in a continuous-corn cropped field in plots that had received one of seven different biochar amendments or a non-charred wood pellet amendment 2.5 yr prior to start of this study. Litterbags were collected over the course of 14 weeks. Microbial biomass was assessed in treatment plots the previous fall. Though first-order decomposition rate constants were positively correlated to microbial biomass, neither parameter was statistically affected by biochar or wood-pellet treatments. The findings indicated only a residual of potentially positive and negative initial impacts of biochars on residue decomposition, which fit in line with established feedstock and pyrolysis influences. Though no significant impacts were observed with field-weathered biochars, effective soil management may yet have to account for repeat applications of biochar.

SPRUCE: Sphagnum Productivity and Community Composition in the SPRUCE Experimental Plots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Norby, R.J.; Childs, J.

This data set reports annual dry matter production of Sphagnum in replicated growth columns, the composition of the moss community, and plot-average Sphagnum productivity in the SPRUCE experimental study plots located in the S1-Bog. Data are reported for 2016 (October 2015 to October 2016) and 2017 (October 2016 to October 2017). Additional data will be appended as they become available.

Field methods and data processing techniques associated with mapped inventory plots

Treesearch

William A. Bechtold; Stanley J. Zarnoch

1999-01-01

The U.S. Forest Inventory and Analysis (FIA) and Forest Health Monitoring (FHM) programs utilize a fixed-area mapped-plot design as the national standard for extensive forest inventories. The mapped-plot design is explained, as well as the rationale for its selection as the national standard. Ratio-of-means estimators am presented as a method to process data from...

Mexico.

PubMed

1993-01-01

The background notes on Mexico provide text and recent statistical information on the geography, population, government, economy, and foreign relations, specifically the North American Free Trade Agreement with US. The 1992 population is estimated at 89 million of which 60% are mestizo (Indian-Spanish), 30% are American Indian, 9% are Caucasian, and 1% are other. 90% are Roman Catholic. There are 8 years of compulsory education. Infant mortality is 30/1000 live births. Life expectancy for males is 68 years and 76 years for females. The labor force is comprised of 30% in services, 24% in agriculture and fishing, 19% in manufacturing, 13% in commerce, 7% in construction, 4% in transportation and communication, and .4% in mining. There are 31 states and a federal district. Gross domestic product (GDP) per capita was $3200 in 1991. Military expenditures were .5% of GDP in 1991. The average inflation rate is 19%. Mexico City with 20 million is the largest urban center in the world. In recent years, the economy has been restructured with market oriented reforms; the result has been a growth of GDP of 3.6% in 1991 from 2% in 1987. Dependence on oil exports has decreased. There has been privatization and deregulation of state-owned companies. Subsidies to inefficient companies have been stopped. Tariff rates were reduced. The financial debt has been reduced and turned into a surplus of .8% in 1992. Mexico's foreign debt has been reduced from its high in 1987 of $107 billion. Agricultural reforms have been ongoing for 50 years. Land was redistributed, but standards of living and productivity have improved only slightly. Rural land tenure regulations have been changed, and other economic reforms are expected. Mexico engages in ad hoc international groups and is selective about membership in international organizations.

Computer user's manual for a generalized curve fit and plotting program

NASA Technical Reports Server (NTRS)

Schlagheck, R. A.; Beadle, B. D., II; Dolerhie, B. D., Jr.; Owen, J. W.

1973-01-01

A FORTRAN coded program has been developed for generating plotted output graphs on 8-1/2 by 11-inch paper. The program is designed to be used by engineers, scientists, and non-programming personnel on any IBM 1130 system that includes a 1627 plotter. The program has been written to provide a fast and efficient method of displaying plotted data without having to generate any additions. Various output options are available to the program user for displaying data in four different types of formatted plots. These options include discrete linear, continuous, and histogram graphical outputs. The manual contains information about the use and operation of this program. A mathematical description of the least squares goodness of fit test is presented. A program listing is also included.

Multiscale Poincaré plots for visualizing the structure of heartbeat time series.

PubMed

Henriques, Teresa S; Mariani, Sara; Burykin, Anton; Rodrigues, Filipa; Silva, Tiago F; Goldberger, Ary L

2016-02-09

Poincaré delay maps are widely used in the analysis of cardiac interbeat interval (RR) dynamics. To facilitate visualization of the structure of these time series, we introduce multiscale Poincaré (MSP) plots. Starting with the original RR time series, the method employs a coarse-graining procedure to create a family of time series, each of which represents the system's dynamics in a different time scale. Next, the Poincaré plots are constructed for the original and the coarse-grained time series. Finally, as an optional adjunct, color can be added to each point to represent its normalized frequency. We illustrate the MSP method on simulated Gaussian white and 1/f noise time series. The MSP plots of 1/f noise time series reveal relative conservation of the phase space area over multiple time scales, while those of white noise show a marked reduction in area. We also show how MSP plots can be used to illustrate the loss of complexity when heartbeat time series from healthy subjects are compared with those from patients with chronic (congestive) heart failure syndrome or with atrial fibrillation. This generalized multiscale approach to Poincaré plots may be useful in visualizing other types of time series.

77 FR 56168 - Reef Fish Fishery of the Gulf of Mexico; Gulf of Mexico Individual Fishing Quota Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

.... 090206140-91081-03] RIN 0648-XC227 Reef Fish Fishery of the Gulf of Mexico; Gulf of Mexico Individual... red snapper and grouper/tilefish components of the reef fish fishery in the Gulf of Mexico (Gulf), the... INFORMATION: The reef fish fishery of the Gulf of Mexico is managed under the Fishery Management Plan for Reef...

EPA Collaboration with Mexico

EPA Pesticide Factsheets

EPA works with our Mexican neighbors on the U.S.-Mexico Environmental Program, a collaboration between the United States and Mexico to improve the environment and protect the health of the nearly 12 million people living along the border.

Comparison of Enterococcus faecium and Enterococcus faecalis Strains Isolated from Water and Clinical Samples: Antimicrobial Susceptibility and Genetic Relationships

PubMed Central

Castillo-Rojas, Gonzalo; Mazari-Hiríart, Marisa; Ponce de León, Sergio; Amieva-Fernández, Rosa I.; Agis-Juárez, Raúl A.; Huebner, Johannes; López-Vidal, Yolanda

2013-01-01

Enterococci are part of the normal intestinal flora in a large number of mammals, and these microbes are currently used as indicators of fecal contamination in water and food for human consumption. These organisms are considered one of the primary causes of nosocomial and environmental infections due to their ability to survive in the environment and to their intrinsic resistance to antimicrobials. The aims of this study were to determine the biochemical patterns and antimicrobial susceptibilities of Enterococcus faecalis and E. faecium isolates from clinical samples and from water (groundwater, water from the Xochimilco wetland, and treated water from the Mexico City Metropolitan Area) and to determine the genetic relationships among these isolates. A total of 121 enterococcus strains were studied; 31 and 90 strains were isolated from clinical samples and water (groundwater, water from the Xochimilco wetland, and water for agricultural irrigation), respectively. Identification to the species level was performed using a multiplex PCR assay, and antimicrobial profiles were obtained using a commercial kit. Twenty-eight strains were analyzed by pulsed-field gel electrophoresis (PFGE). E. faecium strains isolated from water showed an atypical biochemical pattern. The clinical isolates showed higher resistance to antibiotics than those from water. Both the enterococci isolated from humans, and those isolated from water showed high genetic diversity according to the PFGE analysis, although some strains seemed to be closely related. In conclusion, enterococci isolated from humans and water are genetically different. However, water represents a potential route of transmission to the community and a source of antimicrobial resistance genes that may be readily transmitted to other, different bacterial species. PMID:23560050

Comparison of Enterococcus faecium and Enterococcus faecalis Strains isolated from water and clinical samples: antimicrobial susceptibility and genetic relationships.

PubMed

Castillo-Rojas, Gonzalo; Mazari-Hiríart, Marisa; Ponce de León, Sergio; Amieva-Fernández, Rosa I; Agis-Juárez, Raúl A; Huebner, Johannes; López-Vidal, Yolanda

2013-01-01

Enterococci are part of the normal intestinal flora in a large number of mammals, and these microbes are currently used as indicators of fecal contamination in water and food for human consumption. These organisms are considered one of the primary causes of nosocomial and environmental infections due to their ability to survive in the environment and to their intrinsic resistance to antimicrobials. The aims of this study were to determine the biochemical patterns and antimicrobial susceptibilities of Enterococcus faecalis and E. faecium isolates from clinical samples and from water (groundwater, water from the Xochimilco wetland, and treated water from the Mexico City Metropolitan Area) and to determine the genetic relationships among these isolates. A total of 121 enterococcus strains were studied; 31 and 90 strains were isolated from clinical samples and water (groundwater, water from the Xochimilco wetland, and water for agricultural irrigation), respectively. Identification to the species level was performed using a multiplex PCR assay, and antimicrobial profiles were obtained using a commercial kit. Twenty-eight strains were analyzed by pulsed-field gel electrophoresis (PFGE). E. faecium strains isolated from water showed an atypical biochemical pattern. The clinical isolates showed higher resistance to antibiotics than those from water. Both the enterococci isolated from humans, and those isolated from water showed high genetic diversity according to the PFGE analysis, although some strains seemed to be closely related. In conclusion, enterococci isolated from humans and water are genetically different. However, water represents a potential route of transmission to the community and a source of antimicrobial resistance genes that may be readily transmitted to other, different bacterial species.

[Aging in Mexico].

PubMed

Contreras de Lehr, E

1986-01-01

Demographic social and economic aspects of the situation of the elderly in Mexico are described with special emphasis upon education programmes and types of care in nursing homes. Considering the future trends of an increase in Mexico's elderly population, the author calls for more efforts in research and training in the field of gerontology. First results in this area are reported.

77 FR 4461 - New Mexico Regulatory Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

... [SATS No. NM-048-FOR; Docket ID OSM-2010-0014] New Mexico Regulatory Program AGENCY: Office of Surface... approving an amendment to the New Mexico regulatory program (the ``New Mexico program'') under the Surface Mining Control and Reclamation Act of 1977 (``SMCRA'' or ``the Act''). New Mexico proposed non...

Diffusional falsification of kinetic constants on Lineweaver-Burk plots.

PubMed

Ghim, Y S; Chang, H N

1983-11-07

The effect of mass transfer resistances on the Lineweaver-Burk plots in immobilized enzyme systems has been investigated numerically and with analytical approximate solutions. While Hamilton, Gardner & Colton (1974) studied the effect of internal diffusion resistances in planar geometry, our study was extended to the combined effect of internal and external diffusion in cylindrical and spherical geometries as well. The variation of Lineweaver-Burk plots with respect to the geometries was minimized by modifying the Thiele modulus and the Biot number with the shape factor. Especially for a small Biot number all the three Lineweaver-Burk plots fell on a single line. As was discussed by Hamilton et al. (1974), the curvature of the line for large external diffusion resistances was small enough to be assumed linear, which was confirmed from the two approximate solutions for large and small substrate concentrations. Two methods for obtaining intrinsic kinetic constants were proposed: First, we obtained both maximum reaction rate and Michaelis constant by fitting experimental data to a straight line where external diffusion resistance was relatively large, and second, we obtained Michaelis constant from apparent Michaelis constant from the figure in case we knew maximum reaction rate a priori.

Classes of Split-Plot Response Surface Designs for Equivalent Estimation

NASA Technical Reports Server (NTRS)

Parker, Peter A.; Kowalski, Scott M.; Vining, G. Geoffrey

2006-01-01

When planning an experimental investigation, we are frequently faced with factors that are difficult or time consuming to manipulate, thereby making complete randomization impractical. A split-plot structure differentiates between the experimental units associated with these hard-to-change factors and others that are relatively easy-to-change and provides an efficient strategy that integrates the restrictions imposed by the experimental apparatus. Several industrial and scientific examples are presented to illustrate design considerations encountered in the restricted randomization context. In this paper, we propose classes of split-plot response designs that provide an intuitive and natural extension from the completely randomized context. For these designs, the ordinary least squares estimates of the model are equivalent to the generalized least squares estimates. This property provides best linear unbiased estimators and simplifies model estimation. The design conditions that allow for equivalent estimation are presented enabling design construction strategies to transform completely randomized Box-Behnken, equiradial, and small composite designs into a split-plot structure.

Semiarid ethnoagroforestry management: Tajos in the Sierra Gorda, Guanajuato, Mexico.

PubMed

Hoogesteger van Dijk, Vincent M; Casas, Alejandro; Moreno-Calles, Ana Isabel

2017-06-12

The semi-arid environments harbor nearly 40% of biodiversity, and half of indigenous cultures of Mexico. Thousands of communities settled in these areas depend on agriculture and using wild biodiversity for their subsistence. Water, soil, and biodiversity management strategies are therefore crucial for people's life. The tajos, from Sierra Gorda, are important, poorly studied, biocultural systems established in narrow, arid alluvial valleys. The systems are constructed with stone-walls for capturing sediments, gradually creating fertile soils in terraces suitable for agriculture in places where it would not be possible. We analyzed biocultural, ecological, economic and technological relevance of the artificial oasis-like tajos, hypothesizing their high capacity for maintaining agricultural and wild biodiversity while providing resources to people. We conducted our research in three sections of the Mezquital-Xichú River, in three communities of Guanajuato, Mexico. Agroforestry management practices were documented through semi-structured and in-depth qualitative interviews. Vegetation composition of local forests and that maintained in tajos was sampled and compared. Tajos harbor high agrobiodiversity, including native varieties of maize and beans, seven secondary crops, 47 native and 25 introduced perennial plant species. Perennial plants cover on average 26.8% of the total surface of plots. Tajos provide nearly 70% of the products required by households' subsistence and are part of their cultural identity. Tajos are heritage of TEK and land management forms of pre-Columbian Mexican and Mediterranean agricultural techniques, adapting and integrating modern agricultural practices. Tajos are valuable biocultural systems adapted to local semiarid conditions and sources of technology for similar areas of the World.

PLOT3D/AMES, UNIX SUPERCOMPUTER AND SGI IRIS VERSION (WITHOUT TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

PLOT3D/AMES, UNIX SUPERCOMPUTER AND SGI IRIS VERSION (WITH TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

Stemflow variation in Mexico's northeastern forest communities: Its contribution to soil moisture content and aquifer recharge

NASA Astrophysics Data System (ADS)

Návar, José

2011-09-01

SummaryStemflow hydro-ecological importance was measured in trees and assessed in Mexico's northeast forest stands by answering three basic questions: (a) what are the intra and inter-specific stemflow variations; (b) is the stemflow coefficient constant from tree level to stand scales? and (c) what is the stemflow area and wetted soil volume in individual trees and the stemflow volume discharged at the stand scale in two plant communities of northeastern Mexico? Gross rainfall and stemflow flux measurements were conducted on 78 trees of semi-arid, sub-tropical (31 Diospyros texana; 14 Acacia rigidula; four Bumelia celastrina; five Condalia hookeri; three Cordia bioissieri; three Pithecellobium pallens) and temperate forest communities (six Pinus pseudostrobus Lindl. and 12 Quercus spp.). Stemflow was extrapolated from individual trees to the stand scale using 98 inventory plots (1600 m 2 ha -1 each) placed in oak-pine forests and 37 quadrats (5 m × 5 m each) distributed across the Tamaulipan thornscrub forest range. Stemflow infiltration flux and infiltration area measurements assessed the wetted soil volume. Daily measurements were conducted from May of 1997 to November of 1998. Results showed that stemflow coefficients varied between plant communities since they averaged (confidence intervals, α = 0.05) 2.49% (0.57), 0.30% (0.09), and 0.77% (0.27) of the bulk precipitation for Tamaulipan thornscrub, pine, and oak forests, respectively. Intra-specific stemflow variations could not be identified in Tamaulipan although in temperate tree species. Basal diameter explained intra-specific stemflow variation in both plant communities. Stemflow increased threefold since it accounted for by 6.38% and 2.19% of the total bulk rainfall for Tamaulipan thornscrub quadrats and temperate oak-pine inventory plots, respectively. Small shrubs growing underneath large trees, in combination with the presence of small-diameter trees that recorded the largest stemflow coefficients

Geothermal energy from deep sedimentary basins: The Valley of Mexico (Central Mexico)

NASA Astrophysics Data System (ADS)

Lenhardt, Nils; Götz, Annette E.

2015-04-01

The geothermal potential of the Valley of Mexico has not been addressed in the past, although volcaniclastic settings in other parts of the world contain promising target reservoir formations. A first assessment of the geothermal potential of the Valley of Mexico is based on thermophysical data gained from outcrop analogues, covering all lithofacies types, and evaluation of groundwater temperature and heat flow values from literature. Furthermore, the volumetric approach of Muffler and Cataldi (1978) leads to a first estimation of ca. 4000 TWh (14.4 EJ) of power generation from Neogene volcanic rocks within the Valley of Mexico. Comparison with data from other sedimentary basins where deep geothermal reservoirs are identified shows the high potential of the Valley of Mexico for future geothermal reservoir utilization. The mainly low permeable lithotypes may be operated as stimulated systems, depending on the fracture porosity in the deeper subsurface. In some areas also auto-convective thermal water circulation might be expected and direct heat use without artificial stimulation becomes reasonable. Thermophysical properties of tuffs and siliciclastic rocks qualify them as promising target horizons (Lenhardt and Götz, 2015). The here presented data serve to identify exploration areas and are valuable attributes for reservoir modelling, contributing to (1) a reliable reservoir prognosis, (2) the decision of potential reservoir stimulation, and (3) the planning of long-term efficient reservoir utilization. References Lenhardt, N., Götz, A.E., 2015. Geothermal reservoir potential of volcaniclastic settings: The Valley of Mexico, Central Mexico. Renewable Energy. [in press] Muffler, P., Cataldi, R., 1978. Methods for regional assessment of geothermal resources. Geothermics, 7, 53-89.

Plotting the Analemma from Shadow Stick Observations.

ERIC Educational Resources Information Center

Glenn, William H.

1982-01-01

Secondary students can study time and the motions of the sun by plotting an analemma, a graphic representation of the declination of the sun and the equation of time for every day of the year. They can collect data by measuring a dowel stick's shadow in the noon sun. (KC)

New Mexico Library Directory and Statistics. 1995.

ERIC Educational Resources Information Center

Baca, Chris L., Ed.

This directory identifies members of the New Mexico State Library Commission, the New Mexico Advisory Council on Libraries, and staff at the New Mexico State Library. It goes on to list New Mexico libraries alphabetically by city. Within each city libraries are subdivided into public, academic, special, and school categories. Electronic mail…

The Zombie Plot: A Simple Graphic Method for Visualizing the Efficacy of a Diagnostic Test.

PubMed

Richardson, Michael L

2016-08-09

One of the most important jobs of a radiologist is to pick the most appropriate imaging test for a particular clinical situation. Making a proper selection sometimes requires statistical analysis. The objective of this article is to introduce a simple graphic technique, an ROC plot that has been divided into zones of mostly bad imaging efficacy (ZOMBIE, hereafter referred to as the "zombie plot"), that transforms information about imaging efficacy from the numeric domain into the visual domain. The numeric rationale for the use of zombie plots is given, as are several examples of the clinical use of these plots. Two online calculators are described that simplify the process of producing a zombie plot.

Recurrence plots and recurrence quantification analysis of human motion data

NASA Astrophysics Data System (ADS)

Josiński, Henryk; Michalczuk, Agnieszka; Świtoński, Adam; Szczesna, Agnieszka; Wojciechowski, Konrad

2016-06-01

The authors present exemplary application of recurrence plots, cross recurrence plots and recurrence quantification analysis for the purpose of exploration of experimental time series describing selected aspects of human motion. Time series were extracted from treadmill gait sequences which were recorded in the Human Motion Laboratory (HML) of the Polish-Japanese Academy of Information Technology in Bytom, Poland by means of the Vicon system. Analysis was focused on the time series representing movements of hip, knee, ankle and wrist joints in the sagittal plane.

D-GENIES: dot plot large genomes in an interactive, efficient and simple way.

PubMed

Cabanettes, Floréal; Klopp, Christophe

2018-01-01

Dot plots are widely used to quickly compare sequence sets. They provide a synthetic similarity overview, highlighting repetitions, breaks and inversions. Different tools have been developed to easily generated genomic alignment dot plots, but they are often limited in the input sequence size. D-GENIES is a standalone and web application performing large genome alignments using minimap2 software package and generating interactive dot plots. It enables users to sort query sequences along the reference, zoom in the plot and download several image, alignment or sequence files. D-GENIES is an easy-to-install, open-source software package (GPL) developed in Python and JavaScript. The source code is available at https://github.com/genotoul-bioinfo/dgenies and it can be tested at http://dgenies.toulouse.inra.fr/.

78 FR 14225 - Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Gulf of Mexico Reef Fish Fishery...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

.... 120417412-2412-01] RIN 0648-XC510 Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Gulf of Mexico Reef Fish Fishery; 2013 Accountability Measure for Gulf of Mexico Commercial Gray Triggerfish... measure (AM) for commercial gray triggerfish in the Gulf of Mexico (Gulf) reef fish fishery for the 2013...

Recurrence plots revisited

NASA Astrophysics Data System (ADS)

Casdagli, M. C.

1997-09-01

We show that recurrence plots (RPs) give detailed characterizations of time series generated by dynamical systems driven by slowly varying external forces. For deterministic systems we show that RPs of the time series can be used to reconstruct the RP of the driving force if it varies sufficiently slowly. If the driving force is one-dimensional, its functional form can then be inferred up to an invertible coordinate transformation. The same results hold for stochastic systems if the RP of the time series is suitably averaged and transformed. These results are used to investigate the nonlinear prediction of time series generated by dynamical systems driven by slowly varying external forces. We also consider the problem of detecting a small change in the driving force, and propose a surrogate data technique for assessing statistical significance. Numerically simulated time series and a time series of respiration rates recorded from a subject with sleep apnea are used as illustrative examples.

Coarse-graining time series data: Recurrence plot of recurrence plots and its application for music

NASA Astrophysics Data System (ADS)

Fukino, Miwa; Hirata, Yoshito; Aihara, Kazuyuki

2016-02-01

We propose a nonlinear time series method for characterizing two layers of regularity simultaneously. The key of the method is using the recurrence plots hierarchically, which allows us to preserve the underlying regularities behind the original time series. We demonstrate the proposed method with musical data. The proposed method enables us to visualize both the local and the global musical regularities or two different features at the same time. Furthermore, the determinism scores imply that the proposed method may be useful for analyzing emotional response to the music.

Coarse-graining time series data: Recurrence plot of recurrence plots and its application for music.

PubMed

Fukino, Miwa; Hirata, Yoshito; Aihara, Kazuyuki

2016-02-01

We propose a nonlinear time series method for characterizing two layers of regularity simultaneously. The key of the method is using the recurrence plots hierarchically, which allows us to preserve the underlying regularities behind the original time series. We demonstrate the proposed method with musical data. The proposed method enables us to visualize both the local and the global musical regularities or two different features at the same time. Furthermore, the determinism scores imply that the proposed method may be useful for analyzing emotional response to the music.

Do Plot Scale Studies Yield Useful Data When Assessing Field Scale Practices?

USDA-ARS?s Scientific Manuscript database

Plot scale data has been used to develop models used to assess field and watershed scale nutrient losses. The objective of this study was to determine if phosphorus (P) loss results from plot scale rainfall simulation studies are “directionally correct” when compared to field scale P losses. Two fie...

Linked Micromap Plots for South America -- General Design Considerations and Specific Adjustments

EPA Science Inventory

Linked Micromap (LM) plots have been in use in the United States of America (USA) since their introduction in 1996 as an effective way to display regional data, such as for states or counties. However, LM plots were always hard to create by non--experts. The introduction of the m...

Otomi de San Andres Cuexcontitlan, Estado de Mexico (Otomi of San Andres Cuexcontitlan, State of Mexico).

ERIC Educational Resources Information Center

Lastra, Yolanda

This document is one of 17 volumes on indigenous Mexican languages and is the result of a project undertaken by the Archivo de Lenguas Indigenas de Mexico. This volume contains information on Otomi, an indigenous language of Mexico spoken in San Andres Cuexcontitlan, in the state of Mexico. The objective of collecting such a representative…

Visualizing the deep end of sound: plotting multi-parameter results from infrasound data analysis

NASA Astrophysics Data System (ADS)

Perttu, A. B.; Taisne, B.

2016-12-01

Infrasound is sound below the threshold of human hearing: approximately 20 Hz. The field of infrasound research, like other waveform based fields relies on several standard processing methods and data visualizations, including waveform plots and spectrograms. The installation of the International Monitoring System (IMS) global network of infrasound arrays, contributed to the resurgence of infrasound research. Array processing is an important method used in infrasound research, however, this method produces data sets with a large number of parameters, and requires innovative plotting techniques. The goal in designing new figures is to be able to present easily comprehendible, and information-rich plots by careful selection of data density and plotting methods.

Subsidence Induced Faulting Hazard risk maps in Mexico City and Morelia, central Mexico

NASA Astrophysics Data System (ADS)

Cabral-Cano, E.; Solano-Rojas, D.; Hernández-Espriu, J.; Cigna, F.; Wdowinski, S.; Osmanoglu, B.; Falorni, G.; Bohane, A.; Colombo, D.

2012-12-01

Subsidence and surface faulting have affected urban areas in Central Mexico for decades and the process has intensified as a consequence of urban sprawl and economic growth. This process causes substantial damages to the urban infrastructure and housing structures and in several cities it is becoming a major factor to be considered when planning urban development, land use zoning and hazard mitigation strategies in the next decades. Subsidence is usually associated with aggressive groundwater extraction rates and a general decrease of aquifer static level that promotes soil consolidation, deformation and ultimately, surface faulting. However, local stratigraphic and structural conditions also play an important role in the development and extension of faults. Despite its potential for damaging housing, and other urban infrastructure, the economic impact of this phenomena is poorly known, in part because detailed, city-wide subsidence induced faulting risk maps have not been published before. Nevertheless, modern remote sensing techniques are most suitable for this task. We present the results of a risk analysis for subsidence induced surface faulting in two cities in central Mexico: Morelia and Mexico City. Our analysis in Mexico City and Morelia is based on a risk matrix using the horizontal subsidence gradient from a Persistent Scatterer InSAR (Morelia) and SqueeSAR (Mexico City) analysis and 2010 census population distribution data from Mexico's National Institute of Statistics and Geography. Defining subsidence induced surface faulting vulnerability within these urbanized areas is best determined using both magnitude and horizontal subsidence gradient. Our Morelia analysis (597,000 inhabitants with localized subsidence rates up to 80 mm/yr) shows that 7% of the urbanized area is under a high to very high risk level, and 14% of its population (11.7% and 2.3% respectively) lives within these areas. In the case of the Mexico City (15'490,000 inhabitants for the

9 CFR 93.325 - Horses from Mexico.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Horses from Mexico. 93.325 Section 93... CONVEYANCE AND SHIPPING CONTAINERS Horses Mexico 18 § 93.325 Horses from Mexico. Horses offered for entry from Mexico shall be inspected as provided in §§ 93.306 and 93.323; shall be accompanied by a...

9 CFR 93.325 - Horses from Mexico.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Horses from Mexico. 93.325 Section 93... CONVEYANCE AND SHIPPING CONTAINERS Horses Mexico 18 § 93.325 Horses from Mexico. Horses offered for entry from Mexico shall be inspected as provided in §§ 93.306 and 93.323; shall be accompanied by a...

9 CFR 93.325 - Horses from Mexico.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Horses from Mexico. 93.325 Section 93... CONVEYANCE AND SHIPPING CONTAINERS Horses Mexico 18 § 93.325 Horses from Mexico. Horses offered for entry from Mexico shall be inspected as provided in §§ 93.306 and 93.323; shall be accompanied by a...

9 CFR 93.325 - Horses from Mexico.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Horses from Mexico. 93.325 Section 93... CONVEYANCE AND SHIPPING CONTAINERS Horses Mexico 18 § 93.325 Horses from Mexico. Horses offered for entry from Mexico shall be inspected as provided in §§ 93.306 and 93.323; shall be accompanied by a...

9 CFR 93.325 - Horses from Mexico.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Horses from Mexico. 93.325 Section 93... CONVEYANCE AND SHIPPING CONTAINERS Horses Mexico 18 § 93.325 Horses from Mexico. Horses offered for entry from Mexico shall be inspected as provided in §§ 93.306 and 93.323; shall be accompanied by a...

Psychosocial needs of young breast cancer survivors in Mexico City, Mexico

PubMed Central

Rosenberg, Shoshana M.; González-Robledo, Maria Cecilia; Cohn, Julia G.; Villarreal-Garza, Cynthia; Partridge, Ann H.; Knaul, Felicia M.

2018-01-01

Objective Young breast cancer survivors in Mexico face distinct psychosocial challenges that have not been characterized. This study aims to describe the psychosocial needs of young breast cancer survivors in Mexico at 5 or more years of survivorship, identifying areas of focus for early interventions. Methods Breast cancer patients diagnosed at age 40 or prior with 5 or more years since diagnosis were invited to participate in one-on-one 30–60 minute semi-structured audio-recorded interviews at the Instituto Nacional de Cancerología in Mexico City. Transcripts were coded using thematic analysis with NVivo software. Results 25 women participated. Five major phenomena emerged from analysis: (1) minimization of fertility concerns; (2) persistence of body image disturbance over time; (3) barriers to employment during survivorship; (4) impact on family relationships and social networks; & (5) unmet psychological care and informational needs. Conclusions Early interventions with a focus on fertility loss education, access to reconstructive surgery and body image support, guidance during return-to-work, assistance with childcare, integration of psychological care and the fulfillment of informational needs could ameliorate long-term psychological and social distress for young breast cancer survivors in Mexico. PMID:29787612

Psychosocial needs of young breast cancer survivors in Mexico City, Mexico.

PubMed

Hubbeling, Harper G; Rosenberg, Shoshana M; González-Robledo, Maria Cecilia; Cohn, Julia G; Villarreal-Garza, Cynthia; Partridge, Ann H; Knaul, Felicia M

2018-01-01

Young breast cancer survivors in Mexico face distinct psychosocial challenges that have not been characterized. This study aims to describe the psychosocial needs of young breast cancer survivors in Mexico at 5 or more years of survivorship, identifying areas of focus for early interventions. Breast cancer patients diagnosed at age 40 or prior with 5 or more years since diagnosis were invited to participate in one-on-one 30-60 minute semi-structured audio-recorded interviews at the Instituto Nacional de Cancerología in Mexico City. Transcripts were coded using thematic analysis with NVivo software. 25 women participated. Five major phenomena emerged from analysis: (1) minimization of fertility concerns; (2) persistence of body image disturbance over time; (3) barriers to employment during survivorship; (4) impact on family relationships and social networks; & (5) unmet psychological care and informational needs. Early interventions with a focus on fertility loss education, access to reconstructive surgery and body image support, guidance during return-to-work, assistance with childcare, integration of psychological care and the fulfillment of informational needs could ameliorate long-term psychological and social distress for young breast cancer survivors in Mexico.

Mexico, Arizona and New Mexico as seen from the Gemini 12 spacecraft

NASA Technical Reports Server (NTRS)

1966-01-01

Northern portion of Sonora, Mexico; southeastern Arizona and southwestern New Mexico, as seen from the Gemini 12 spacecraft during its 30th revolution of the earth. Includes the Tucson, Phoenix, Mogollon Rim, and Painted Desert areas. A 100 ft. tether line connects the Agena Target Docking Vehicle with the Gemini 12 spacecraft.

7 CFR 319.8-13 - From Northwest Mexico.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false From Northwest Mexico. 319.8-13 Section 319.8-13... for the Entry of Cotton and Covers from Mexico § 319.8-13 From Northwest Mexico. Contingent upon continued freedom of Northwest Mexico and of the West Coast of Mexico from infestations of the pink bollworm...

7 CFR 319.8-13 - From Northwest Mexico.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 5 2012-01-01 2012-01-01 false From Northwest Mexico. 319.8-13 Section 319.8-13... for the Entry of Cotton and Covers from Mexico § 319.8-13 From Northwest Mexico. Contingent upon continued freedom of Northwest Mexico and of the West Coast of Mexico from infestations of the pink bollworm...

7 CFR 319.8-13 - From Northwest Mexico.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false From Northwest Mexico. 319.8-13 Section 319.8-13... for the Entry of Cotton and Covers from Mexico § 319.8-13 From Northwest Mexico. Contingent upon continued freedom of Northwest Mexico and of the West Coast of Mexico from infestations of the pink bollworm...

7 CFR 319.8-13 - From Northwest Mexico.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 5 2013-01-01 2013-01-01 false From Northwest Mexico. 319.8-13 Section 319.8-13... for the Entry of Cotton and Covers from Mexico § 319.8-13 From Northwest Mexico. Contingent upon continued freedom of Northwest Mexico and of the West Coast of Mexico from infestations of the pink bollworm...

7 CFR 319.8-13 - From Northwest Mexico.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false From Northwest Mexico. 319.8-13 Section 319.8-13... for the Entry of Cotton and Covers from Mexico § 319.8-13 From Northwest Mexico. Contingent upon continued freedom of Northwest Mexico and of the West Coast of Mexico from infestations of the pink bollworm...

USING LINKED MICROMAP PLOTS TO CHARACTERIZE OMERNIK ECOREGIONS

EPA Science Inventory

The paper introduces linked micromap (LM plots for presenting environmental summaries. The LM template includes parallel sequences of micromap, able, and statistical summary graphics panels with attention paid to perceptual grouping, sorting and linking of the summary components...

The hexagon/panel system for selecting FIA plots under an annual inventory

Treesearch

Gary J. Brand; Mark D. Nelson; Daniel G. Wendt; Kevin K. Nimerfro

2000-01-01

Forest Inventory and Analysis (FIA) is changing to an annual nationwide forest inventory. This paper describes the sampling grid used to distribute FIA plots across the landscape and to allocate them to a particular measurement year. We also describe the integration of the F1A and Forest Health Monitoring (FHM) plot networks.

[Recurrence plot analysis of HRV for brain ischemia and asphyxia].

PubMed

Chen, Xiaoming; Qiu, Yihong; Zhu, Yisheng

2008-02-01

Heart rate variability (HRV) is the tiny variability existing in the cycles of the heart beats, which reflects the corresponding balance between sympathetic and vagus nerves. Since the nonlinear characteristic of HRV is confirmed, the Recurrence Plot method, a nonlinear dynamic analysis method based on the complexity, could be used to analyze HRV. The results showed the recurrence plot structures and some quantitative indices (L-Mean, L-Entr) during asphyxia insult vary significantly as compared to those in normal conditions, which offer a new method to monitor brain asphyxia injury.

Automatic Classification of Station Quality by Image Based Pattern Recognition of Ppsd Plots

NASA Astrophysics Data System (ADS)

Weber, B.; Herrnkind, S.

2017-12-01

The number of seismic stations is growing and it became common practice to share station waveform data in real-time with the main data centers as IRIS, GEOFON, ORFEUS and RESIF. This made analyzing station performance of increasing importance for automatic real-time processing and station selection. The value of a station depends on different factors as quality and quantity of the data, location of the site and general station density in the surrounding area and finally the type of application it can be used for. The approach described by McNamara and Boaz (2006) became standard in the last decade. It incorporates a probability density function (PDF) to display the distribution of seismic power spectral density (PSD). The low noise model (LNM) and high noise model (HNM) introduced by Peterson (1993) are also displayed in the PPSD plots introduced by McNamara and Boaz allowing an estimation of the station quality. Here we describe how we established an automatic station quality classification module using image based pattern recognition on PPSD plots. The plots were split into 4 bands: short-period characteristics (0.1-0.8 s), body wave characteristics (0.8-5 s), microseismic characteristics (5-12 s) and long-period characteristics (12-100 s). The module sqeval connects to a SeedLink server, checks available stations, requests PPSD plots through the Mustang service from IRIS or PQLX/SQLX or from GIS (gempa Image Server), a module to generate different kind of images as trace plots, map plots, helicorder plots or PPSD plots. It compares the image based quality patterns for the different period bands with the retrieved PPSD plot. The quality of a station is divided into 5 classes for each of the 4 bands. Classes A, B, C, D define regular quality between LNM and HNM while the fifth class represents out of order stations with gain problems, missing data etc. Over all period bands about 100 different patterns are required to classify most of the stations available on the

The PLOT (Paleolimnological Transect) Project in the Russian Arctic

NASA Astrophysics Data System (ADS)

Gromig, R.; Andreev, A.; Baumer, M.; Bolshiyanov, D.; Fedorov, G.; Frolova, L.; Krastel, S.; Lebas, E.; Ludikova, A.; Melles, M.; Meyer, H.; Nazarova, L.; Pestryakova, L.; Savelieva, L.; Shumilovskikh, L.; Subetto, D.; Wagner, B.; Wennrich, V.

2017-12-01

The joint Russian- German project 'PLOT - Paleolimnological Transec' aims to recover lake sediment sequences along a >6000 km long longitudinal transect across the Eurasian Arctic in order to investigate the Late Quaternary climatic and environmental history. The climate history of the Arctic is of particular interest since it is the region, which is experiencing major impact of the current climate change. The project is funded for three years (2015-2018) by the Russian and German Ministries of Research. Since 2013 extensive fieldwork, including seismic surveys, coring, and hydrological investigations, was carried out at lakes Ladoga (NW Russia, pilot study), Bolshoye Shuchye (Polar Urals), Emanda (Verkhoyansk Range, field campaign planned for August 2017), Levinson-Lessing and Taymyr (Taymyr Peninsula). Fieldwork at lakes Bolshoye Shuchye, Levinson-Lessing and Taymyr was conducted in collaboration with the Russian-Norwegian CHASE (Climate History along the Arctic Seaboard of Eurasia) project. A major objective of the PLOT project was to recover preglacial sediments. A multiproxy approach was applied to the analytical work of all cores, including (bio-)geochemical, sedimentological, geophysical, and biological analyses. First data implies the presence of preglacial sediments in the cores from all lakes so far visited. Age-depth models, based on radiocarbon dating, OSL dating, paleomagnetic measurements, identification of cryptotephra, and varve counting (where applicable), are in progress. Climate variability in the records shall be compared to that recorded at Lake Eĺgygytgyn (NE Russia), which represents the master record for the Siberian Arctic. The outcome of the PLOT project will be a better understanding of the temporal and spatial variability and development of the Arctic climate. Here, we present the major results and first key interpretations of the PLOT project, along with an outlook on the future strategy and foci. First results from lakes Ladoga

Mesozoic to Recent, regional tectonic controls on subsidence patterns in the Gulf of Mexico basin

NASA Astrophysics Data System (ADS)

Almatrood, M.; Mann, P.; Bugti, M. N.

2016-12-01

We have produced subsidence plots for 26 deep wells into the deeper-water areas of the Gulf of Mexico (GOM) in order to identify regional tectonic controls and propose tectonic phases. Our results show three sub-regions of the GOM basin that have distinctive and correlative subsidence patterns: 1) Northern GOM from offshore Texas to central Florida (9 wells) - this area is characterized by a deeply buried, Triassic-early Jurassic rift event that is not represented by our wells that penetrate only the post-rift Cretaceous to recent passive margin phase. The sole complexity in the passive margin phase of this sub-region is the acceleration of prograding clastic margins including the Mississippi fan in Miocene time; 2) Southeastern GOM in the Straits of Florida and Cuba area (5 wells) - this area shows that the Cretaceous passive margin overlying the rift phase is abruptly drowned in late Cretaceous as this part of the passive margin of North America that is flexed and partially subducted beneath the Caribbean arc as it encroaches from the southwest to eventually collide with the North American passive margin in the Paleogene; 3) Western GOM along the length of the eastern continental margin of Mexico (12 wells) - this is the most complex of the three areas in that shares the Mesozic rifting and passive margin phase but is unique with a slightly younger collisional event and foreland basin phase associated with the Laramide orogeny in Mexico extending from the KT boundary to the Oligocene. Following this orogenic event there is a re-emergence of the passive margin phase during the Neogene along locally affected by extensional and convergent deformation associated with passive margin fold belts. In summary, the GOM basin exhibits evidence for widespread rifting and passive margin formation associated with the breakup of Pangea in Mesozoic times that was locally superimposed and deformed during the late Cretaceous-Paleogene period by: 1) Caribbean subduction and

Laboratory manual: mineral X-ray diffraction data retrieval/plot computer program

USGS Publications Warehouse

Hauff, Phoebe L.; VanTrump, George

1976-01-01

The Mineral X-Ray Diffraction Data Retrieval/Plot Computer Program--XRDPLT (VanTrump and Hauff, 1976a) is used to retrieve and plot mineral X-ray diffraction data. The program operates on a file of mineral powder diffraction data (VanTrump and Hauff, 1976b) which contains two-theta or 'd' values, and intensities, chemical formula, mineral name, identification number, and mineral group code. XRDPLT is a machine-independent Fortran program which operates in time-sharing mode on a DEC System i0 computer and the Gerber plotter (Evenden, 1974). The program prompts the user to respond from a time-sharing terminal in a conversational format with the required input information. The program offers two major options: retrieval only; retrieval and plot. The first option retrieves mineral names, formulas, and groups from the file by identification number, by the mineral group code (a classification by chemistry or structure), or by searches based on the formula components. For example, it enables the user to search for minerals by major groups (i.e., feldspars, micas, amphiboles, oxides, phosphates, carbonates) by elemental composition (i.e., Fe, Cu, AI, Zn), or by a combination of these (i.e., all copper-bearing arsenates). The second option retrieves as the first, but also plots the retrieved 2-theta and intensity values as diagrammatic X-ray powder patterns on mylar sheets or overlays. These plots can be made using scale combinations compatible with chart recorder diffractograms and 114.59 mm powder camera films. The overlays are then used to separate or sieve out unrelated minerals until unknowns are matched and identified.

Aztec Mexico: Discovery of Templo Mayor.

ERIC Educational Resources Information Center

Breslav, Marc

1982-01-01

Describes the Aztec archaeological artifacts shown in the American Museum of Natural History exhibit: "Aztec Mexico: Discovery of Templo Mayor." More than 100 objects, ranging from human skulls to jewelry, found in the excavation of the Great Temple of Mexico located under the center of Mexico City, were displayed. (AM)

[Murderers in white coats--the physicians' plot against Stalin].

PubMed

Olsen, B

1997-12-10

During the Moscow trials in 1936-38 several doctors were sentenced for participating in the murders of party leaders. As others who were accused, the doctors willingly confessed to crimes they could not possibly have committed. A second doctors' plot took place in the autumn of 1952. This time nine doctors, six of them Jews, were arrested for the attempted murder of political leaders. Only the unexpected death of Josef Stalin prevented a new wave of terror. With the single exception of Genrikh Grigorjevitsj Jagoda (1891-1938), head of the NKVD (KGB's predecessor), all those sentenced under the Moscow process are now rehabilitated. The participants of the second doctors' plot were rehabilitated immediately after Stalin's death.

The Chymistry of "The Learned Dr Plot" (1640-96).

PubMed

Roos, Anna Marie

2014-01-01

In the seventeenth century, there were developing norms of openness in the presentation of scientific knowledge that were at odds with traditions of secrecy among chymists, particularly practitioners of chrysopoeia, or the transmutation of metals. This chapter analyzes how Dr. Robert Plot, the first professor of chymistry at Oxford, negotiated these boundaries within an institutional context. I first delineate his chymical and experimental practice, which incorporated procedures from medieval alchemical sources, particularly the Lullian corpus, as well as more novel practices from seventeenth-century chymistry. Then, I analyze how personal and institutional ambitions and economic considerations shaped to what extent Plot negotiated the boundaries between secrecy and the public dissemination of chymical knowledge.

A statistical data analysis and plotting program for cloud microphysics experiments

NASA Technical Reports Server (NTRS)

Jordan, A. J.

1981-01-01

The analysis software developed for atmospheric cloud microphysics experiments conducted in the laboratory as well as aboard a KC-135 aircraft is described. A group of four programs was developed and implemented on a Hewlett Packard 1000 series F minicomputer running under HP's RTE-IVB operating system. The programs control and read data from a MEMODYNE Model 3765-8BV cassette recorder, format the data on the Hewlett Packard disk subsystem, and generate statistical data (mean, variance, standard deviation) and voltage and engineering unit plots on a user selected plotting device. The programs are written in HP FORTRAN IV and HP ASSEMBLY Language with the graphics software using the HP 1000 Graphics. The supported plotting devices are the HP 2647A graphics terminal, the HP 9872B four color pen plotter, and the HP 2608A matrix line printer.

In Search of Determinism-Sensitive Region to Avoid Artefacts in Recurrence Plots

NASA Astrophysics Data System (ADS)

Wendi, Dadiyorto; Marwan, Norbert; Merz, Bruno

As an effort to reduce parameter uncertainties in constructing recurrence plots, and in particular to avoid potential artefacts, this paper presents a technique to derive artefact-safe region of parameter sets. This technique exploits both deterministic (incl. chaos) and stochastic signal characteristics of recurrence quantification (i.e. diagonal structures). It is useful when the evaluated signal is known to be deterministic. This study focuses on the recurrence plot generated from the reconstructed phase space in order to represent many real application scenarios when not all variables to describe a system are available (data scarcity). The technique involves random shuffling of the original signal to destroy its original deterministic characteristics. Its purpose is to evaluate whether the determinism values of the original and the shuffled signal remain closely together, and therefore suggesting that the recurrence plot might comprise artefacts. The use of such determinism-sensitive region shall be accompanied by standard embedding optimization approaches, e.g. using indices like false nearest neighbor and mutual information, to result in a more reliable recurrence plot parameterization.

Computer program for plotting and fairing wind-tunnel data

NASA Technical Reports Server (NTRS)

Morgan, H. L., Jr.

1983-01-01

A detailed description of the Langley computer program PLOTWD which plots and fairs experimental wind-tunnel data is presented. The program was written for use primarily on the Langley CDC computer and CALCOMP plotters. The fundamental operating features of the program are that the input data are read and written to a random-access file for use during program execution, that the data for a selected run can be sorted and edited to delete duplicate points, and that the data can be plotted and faired using tension splines, least-squares polynomial, or least-squares cubic-spline curves. The most noteworthy feature of the program is the simplicity of the user-supplied input requirements. Several subroutines are also included that can be used to draw grid lines, zero lines, axis scale values and lables, and legends. A detailed description of the program operational features and each sub-program are presented. The general application of the program is also discussed together with the input and output for two typical plot types. A listing of the program code, user-guide, and output description are presented in appendices. The program has been in use at Langley for several years and has proven to be both easy to use and versatile.

PLOT3D/AMES, APOLLO UNIX VERSION USING GMR3D (WITHOUT TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

PLOT3D/AMES, APOLLO UNIX VERSION USING GMR3D (WITH TURB3D)

NASA Technical Reports Server (NTRS)

Buning, P.

1994-01-01

PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into

Historical growth plots in the Pacific Southwest

Treesearch

Lawrence A. Rabin; William W. Oliver; Robert F. Powers; Martin W. Ritchie; Matt D. Busse; Eric E. Knapp

2009-01-01

In the past, researchers from the Pacific Southwest Research Station (PSW) undertook forest growth studies to evaluate how best to manage timber resources. However, historical and future data collected at PSW growth plots also have the potential to increase our understanding of the ecological processes occurring in our forests and shed light on national issues of...

PuffinPlot: A versatile, user-friendly program for paleomagnetic analysis

NASA Astrophysics Data System (ADS)

Lurcock, P. C.; Wilson, G. S.

2012-06-01

PuffinPlot is a user-friendly desktop application for analysis of paleomagnetic data, offering a unique combination of features. It runs on several operating systems, including Windows, Mac OS X, and Linux; supports both discrete and long core data; and facilitates analysis of very weakly magnetic samples. As well as interactive graphical operation, PuffinPlot offers batch analysis for large volumes of data, and a Python scripting interface for programmatic control of its features. Available data displays include demagnetization/intensity, Zijderveld, equal-area (for sample, site, and suite level demagnetization data, and for magnetic susceptibility anisotropy data), a demagnetization data table, and a natural remanent magnetization intensity histogram. Analysis types include principal component analysis, Fisherian statistics, and great-circle path intersections. The results of calculations can be exported as CSV (comma-separated value) files; graphs can be printed, and can also be saved as publication-quality vector files in SVG or PDF format. PuffinPlot is free, and the program, user manual, and fully documented source code may be downloaded from http://code.google.com/p/puffinplot/.

Including the Tukey Mean-Difference (Bland-Altman) Plot in a Statistics Course

ERIC Educational Resources Information Center

Kozak, Marcin; Wnuk, Agnieszka

2014-01-01

The Tukey mean-difference plot, also called the Bland-Altman plot, is a recognized graphical tool in the exploration of biometrical data. We show that this technique deserves a place on an introductory statistics course by encouraging students to think about the kind of graph they wish to create, rather than just creating the default graph for the…

Measuring Forest Area Loss Over Time Using FIA Plots and Satellite Imagery

Treesearch

Michael L. Hoppus; Andrew J. Lister

2005-01-01

How accurately can FIA plots, scattered at 1 per 6,000 acres, identify often rare forest land loss, estimated at less than 1 percent per year in the Northeast? Here we explore this question mathematically, empirically, and by comparing FIA plot estimates of forest change with satellite image based maps of forest loss. The mathematical probability of exactly estimating...

Plots of ground coverage achieveable by global change monitoring instruments and spacecraft

NASA Technical Reports Server (NTRS)

Knight, Heather R.; Foernsler, Lynda

1991-01-01

Low Earth Orbit (LEO) and Geosynchronous Earth Orbit (GEO) satellite plots are given. All satellites are in an 800 km circular orbit at an inclination of 98.6 deg (sun synchronous). Specifics of the instrument package are given. Additionally, the time period of the plot and the percentage of the Earth covered during the time period are listed.

SPRUCE Tree Growth Assessments of Picea and Larix in S1-Bog Plots and SPRUCE Experimental Plots beginning in 2011

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanson, P.J.,; Phillips, J.R.; Wullschelger, S.D.

This data set reports tree growth measurements of mature Picea mariana and Larix laricina located in the S1-Bog permanent plots and the SPRUCE experimental study plots, Annual data collections were initiated in February of 2011and have been continued on an annual basis during mid-winter observation periods at the end of February or early March. Data collections are anticipated to continue through February of 2025 and this data set will be appended annually. Initial observations in 2011 included measurements of circumference at 1.3 m (diameter at breast height assessments; DBH) above the nominal bog hollow surface, tree heights and crown diameters.more » Subsequent annual measurements have focused on the measures of circumference at DBH. Circumference measurements to the nearest 0.1 cm are converted to DBH in cm and basal area at DBH in (cm2). Tree height and crown diameter are measured to the nearest 0.1 m.« less

History of nonnative Monk Parakeets in Mexico

PubMed Central

Smith-Vidaurre, Grace; Salinas-Melgoza, Alejandro

2017-01-01

Nonnative Monk Parakeets have been reported in increasing numbers across many cities in Mexico, and were formally classified as an invasive species in Mexico in late 2016. However, there has not been a large-scale attempt to determine how international pet trade and national and international governmental regulations have played a part in colonization, and when the species appeared in different areas. We describe the changes in regulations that led the international pet trade market to shift to Mexico, then used international trade data to determine how many parakeets were commercially imported each year and where those individuals originated. We also quantified the recent increases in Monk Parakeet (Myiopsitta monachus) sightings in Mexico in both the scientific literature and in citizen science reports. We describe the timeline of increased reports to understand the history of nonnative Monk Parakeets in Mexico. As in other areas where the species has colonized, the main mode of transport is through the international pet trade. Over half a million Monk Parakeets were commercially imported to Mexico during 2000–2015, with the majority of importation (90%) occurring in 2008–2014, and almost all (98%) were imported from Uruguay. The earliest record of a free-flying Monk Parakeet was observed during 1994–1995 in Mexico City, but sightings of the parakeets did not become geographically widespread in either the scientific literature or citizen science databases until 2012–2015. By 2015, parakeets had been reported in 97 cities in Mexico. Mexico City has consistently seen steep increases in reporting since this species was first reported in Mexico. Here we find that both national and international legal regulations and health concerns drove a rise and fall in Monk Parakeet pet trade importations, shortly followed by widespread sightings of feral parakeets across Mexico. Further monitoring of introduced Monk Parakeet populations in Mexico is needed to understand

History of nonnative Monk Parakeets in Mexico.

PubMed

Hobson, Elizabeth A; Smith-Vidaurre, Grace; Salinas-Melgoza, Alejandro

2017-01-01

Nonnative Monk Parakeets have been reported in increasing numbers across many cities in Mexico, and were formally classified as an invasive species in Mexico in late 2016. However, there has not been a large-scale attempt to determine how international pet trade and national and international governmental regulations have played a part in colonization, and when the species appeared in different areas. We describe the changes in regulations that led the international pet trade market to shift to Mexico, then used international trade data to determine how many parakeets were commercially imported each year and where those individuals originated. We also quantified the recent increases in Monk Parakeet (Myiopsitta monachus) sightings in Mexico in both the scientific literature and in citizen science reports. We describe the timeline of increased reports to understand the history of nonnative Monk Parakeets in Mexico. As in other areas where the species has colonized, the main mode of transport is through the international pet trade. Over half a million Monk Parakeets were commercially imported to Mexico during 2000-2015, with the majority of importation (90%) occurring in 2008-2014, and almost all (98%) were imported from Uruguay. The earliest record of a free-flying Monk Parakeet was observed during 1994-1995 in Mexico City, but sightings of the parakeets did not become geographically widespread in either the scientific literature or citizen science databases until 2012-2015. By 2015, parakeets had been reported in 97 cities in Mexico. Mexico City has consistently seen steep increases in reporting since this species was first reported in Mexico. Here we find that both national and international legal regulations and health concerns drove a rise and fall in Monk Parakeet pet trade importations, shortly followed by widespread sightings of feral parakeets across Mexico. Further monitoring of introduced Monk Parakeet populations in Mexico is needed to understand the

Impact of animal waste application on runoff water quality in field experimental plots.

PubMed

Hill, Dagne D; Owens, William E; Tchoounwou, Paul B

2005-08-01

Animal waste from dairy and poultry operations is an economical and commonly used fertilizer in the state of Louisiana. The application of animal waste to pasture lands not only is a source of fertilizer, but also allows for a convenient method of waste disposal. The disposal of animal wastes on land is a potential nonpoint source of water degradation. Water degradation and human health is a major concern when considering the disposal of large quantities of animal waste. The objective of this research was to determine the effect of animal waste application on biological (fecal coliform, Enterobacter spp. and Escherichia coli) and physical/chemical (temperature, pH, nitrate nitrogen, ammonia nitrogen, phosphate, copper, zinc, and sulfate) characteristics of runoff water in experimental plots. The effects of the application of animal waste have been evaluated by utilizing experimental plots and simulated rainfall events. Samples of runoff water were collected and analyzed for fecal coliforms. Fecal coliforms isolated from these samples were identified to the species level. Chemical analysis was performed following standard test protocols. An analysis of temperature, ammonia nitrogen, nitrate nitrogen, iron, copper, phosphate, potassium, sulfate, zinc and bacterial levels was performed following standard test protocols as presented in Standard Methods for the Examination of Water and Wastewater [1]. In the experimental plots, less time was required in the tilled broiler litter plots for the measured chemicals to decrease below the initial pre-treatment levels. A decrease of over 50% was noted between the first and second rainfall events for sulfate levels. This decrease was seen after only four simulated rainfall events in tilled broiler litter plots whereas broiler litter plots required eight simulated rainfall events to show this same type of reduction. A reverse trend was seen in the broiler litter plots and the tilled broiler plots for potassium. Bacteria numbers

The Tarahumara of Mexico.

ERIC Educational Resources Information Center

Paciotto, Carla

This paper reviews factors contributing to the loss of language and culture of the Tarahumara people of Mexico and describes a program aimed at preserving Tarahumara language and culture. The Tarahumara people reside in the Sierra Tarahumara in the northern state of Chihuahua, Mexico. Although the Tarahumara people successfully avoided…

Reproducibility Between Brain Uptake Ratio Using Anatomic Standardization and Patlak-Plot Methods.

PubMed

Shibutani, Takayuki; Onoguchi, Masahisa; Noguchi, Atsushi; Yamada, Tomoki; Tsuchihashi, Hiroko; Nakajima, Tadashi; Kinuya, Seigo

2015-12-01

The Patlak-plot and conventional methods of determining brain uptake ratio (BUR) have some problems with reproducibility. We formulated a method of determining BUR using anatomic standardization (BUR-AS) in a statistical parametric mapping algorithm to improve reproducibility. The objective of this study was to demonstrate the inter- and intraoperator reproducibility of mean cerebral blood flow as determined using BUR-AS in comparison to the conventional-BUR (BUR-C) and Patlak-plot methods. The images of 30 patients who underwent brain perfusion SPECT were retrospectively used in this study. The images were reconstructed using ordered-subset expectation maximization and processed using an automatic quantitative analysis for cerebral blood flow of ECD tool. The mean SPECT count was calculated from axial basal ganglia slices of the normal side (slices 31-40) drawn using a 3-dimensional stereotactic region-of-interest template after anatomic standardization. The mean cerebral blood flow was calculated from the mean SPECT count. Reproducibility was evaluated using coefficient of variation and Bland-Altman plotting. For both inter- and intraoperator reproducibility, the BUR-AS method had the lowest coefficient of variation and smallest error range about the Bland-Altman plot. Mean CBF obtained using the BUR-AS method had the highest reproducibility. Compared with the Patlak-plot and BUR-C methods, the BUR-AS method provides greater inter- and intraoperator reproducibility of cerebral blood flow measurement. © 2015 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

Surveillance of Site A and Plot M, Report for 2009.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Golchert, N. W.

2010-04-21

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2009 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are usedmore » to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.« less

Surveillance of Site A and Plot M report for 2010.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Golchert, N. W.

2011-05-31

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2010 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are usedmore » to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.« less

An emission processing system for air quality modelling in the Mexico City metropolitan area: Evaluation and comparison of the MOBILE6.2-Mexico and MOVES-Mexico traffic emissions.

PubMed

Guevara, M; Tena, C; Soret, A; Serradell, K; Guzmán, D; Retama, A; Camacho, P; Jaimes-Palomera, M; Mediavilla, A

2017-04-15

This article describes the High-Elective Resolution Modelling Emission System for Mexico (HERMES-Mex) model, an emission processing tool developed to transform the official Mexico City Metropolitan Area (MCMA) emission inventory into hourly, gridded (up to 1km 2 ) and speciated emissions used to drive mesoscale air quality simulations with the Community Multi-scale Air Quality (CMAQ) model. The methods and ancillary information used for the spatial and temporal disaggregation and speciation of the emissions are presented and discussed. The resulting emission system is evaluated, and a case study on CO, NO 2 , O 3 , VOC and PM 2.5 concentrations is conducted to demonstrate its applicability. Moreover, resulting traffic emissions from the Mobile Source Emission Factor Model for Mexico (MOBILE6.2-Mexico) and the MOtor Vehicle Emission Simulator for Mexico (MOVES-Mexico) models are integrated in the tool to assess and compare their performance. NO x and VOC total emissions modelled are reduced by 37% and 26% in the MCMA when replacing MOBILE6.2-Mexico for MOVES-Mexico traffic emissions. In terms of air quality, the system composed by the Weather Research and Forecasting model (WRF) coupled with the HERMES-Mex and CMAQ models properly reproduces the pollutant levels and patterns measured in the MCMA. The system's performance clearly improves in urban stations with a strong influence of traffic sources when applying MOVES-Mexico emissions. Despite reducing estimations of modelled precursor emissions, O 3 peak averages are increased in the MCMA core urban area (up to 30ppb) when using MOVES-Mexico mobile emissions due to its VOC-limited regime, while concentrations in the surrounding suburban/rural areas decrease or increase depending on the meteorological conditions of the day. The results obtained suggest that the HERMES-Mex model can be used to provide model-ready emissions for air quality modelling in the MCMA. Copyright © 2017 Elsevier B.V. All rights reserved.

New Mexico Charter Schools Annual Report

ERIC Educational Resources Information Center

New Mexico Public Education Department, 2013

2013-01-01

In 2011, the New Mexico legislature passed changes to the Charter School Act that provided more accountability for both charters and authorizers in New Mexico. As part of that law, the Public Education Department (PED) is asked to submit an annual report on the status of charter schools in New Mexico. This is the first report submitted under that…

Volcano plots in hydrogen electrocatalysis - uses and abuses.

PubMed

Quaino, Paola; Juarez, Fernanda; Santos, Elizabeth; Schmickler, Wolfgang

2014-01-01

Sabatier's principle suggests, that for hydrogen evolution a plot of the rate constant versus the hydrogen adsorption energy should result in a volcano, and several such plots have been presented in the literature. A thorough examination of the data shows, that there is no volcano once the oxide-covered metals are left out. We examine the factors that govern the reaction rate in the light of our own theory and conclude, that Sabatier's principle is only one of several factors that determine the rate. With the exception of nickel and cobalt, the reaction rate does not decrease for highly exothermic hydrogen adsorption as predicted, because the reaction passes through more suitable intermediate states. The case of nickel is given special attention; since it is a 3d metal, its orbitals are compact and the overlap with hydrogen is too low to make it a good catalyst.

NAIplot: An opensource web tool to visualize neuraminidase inhibitor (NAI) phenotypic susceptibility results using kernel density plots.

PubMed

Lytras, Theodore; Kossyvakis, Athanasios; Mentis, Andreas

2016-02-01

The results of neuraminidase inhibitor (NAI) enzyme inhibition assays are commonly expressed as 50% inhibitory concentration (IC50) fold-change values and presented graphically in box plots (box-and-whisker plots). An alternative and more informative type of graph is the kernel density plot, which we propose should be the preferred one for this purpose. In this paper we discuss the limitations of box plots and the advantages of the kernel density plot, and we present NAIplot, an opensource web application that allows convenient creation of density plots specifically for visualizing the results of NAI enzyme inhibition assays, as well as for general purposes. Copyright © 2015 Elsevier B.V. All rights reserved.

Computer Plotting Data Points in the Engine Research Building

NASA Image and Video Library

1956-09-21

A female computer plotting compressor data in the Engine Research Building at the NACA’s Lewis Flight Propulsion Laboratory. The Computing Section was introduced during World War II to relieve short-handed research engineers of some of the tedious data-taking work. The computers made the initial computations and plotted the data graphically. The researcher then analyzed the data and either summarized the findings in a report or made modifications or ran the test again. With the introduction of mechanical computer systems in the 1950s the female computers learned how to encode the punch cards. As the data processing capabilities increased, fewer female computers were needed. Many left on their own to start families, while others earned mathematical degrees and moved into advanced positions.

Comparative evolutionary diversity and phylogenetic structure across multiple forest dynamics plots: a mega-phylogeny approach

PubMed Central

Erickson, David L.; Jones, Frank A.; Swenson, Nathan G.; Pei, Nancai; Bourg, Norman A.; Chen, Wenna; Davies, Stuart J.; Ge, Xue-jun; Hao, Zhanqing; Howe, Robert W.; Huang, Chun-Lin; Larson, Andrew J.; Lum, Shawn K. Y.; Lutz, James A.; Ma, Keping; Meegaskumbura, Madhava; Mi, Xiangcheng; Parker, John D.; Fang-Sun, I.; Wright, S. Joseph; Wolf, Amy T.; Ye, W.; Xing, Dingliang; Zimmerman, Jess K.; Kress, W. John

2014-01-01

Forest dynamics plots, which now span longitudes, latitudes, and habitat types across the globe, offer unparalleled insights into the ecological and evolutionary processes that determine how species are assembled into communities. Understanding phylogenetic relationships among species in a community has become an important component of assessing assembly processes. However, the application of evolutionary information to questions in community ecology has been limited in large part by the lack of accurate estimates of phylogenetic relationships among individual species found within communities, and is particularly limiting in comparisons between communities. Therefore, streamlining and maximizing the information content of these community phylogenies is a priority. To test the viability and advantage of a multi-community phylogeny, we constructed a multi-plot mega-phylogeny of 1347 species of trees across 15 forest dynamics plots in the ForestGEO network using DNA barcode sequence data (rbcL, matK, and psbA-trnH) and compared community phylogenies for each individual plot with respect to support for topology and branch lengths, which affect evolutionary inference of community processes. The levels of taxonomic differentiation across the phylogeny were examined by quantifying the frequency of resolved nodes throughout. In addition, three phylogenetic distance (PD) metrics that are commonly used to infer assembly processes were estimated for each plot [PD, Mean Phylogenetic Distance (MPD), and Mean Nearest Taxon Distance (MNTD)]. Lastly, we examine the partitioning of phylogenetic diversity among community plots through quantification of inter-community MPD and MNTD. Overall, evolutionary relationships were highly resolved across the DNA barcode-based mega-phylogeny, and phylogenetic resolution for each community plot was improved when estimated within the context of the mega-phylogeny. Likewise, when compared with phylogenies for individual plots, estimates of

Real lives 3: Mexico.

PubMed

Werner, L

1994-01-01

Mexico City's earthquake of September 1985 killed 7000 people and destroyed tens of thousands of inner-city low-income housing units. It also spurred the growth of squatter settlements at the urban edge of the city. Dario Martinez is one such settlement, a colonia populare, to the city's south-east, just inside the federal district state of Mexico. Smoke pollution, garbage, open sewers, and industrial encroachment are typical for squatter settlements on the periphery. Even so, and despite the comparative lack of economic opportunity forcing people to commute to the city center for employment, the physical quality of life is better that what poor families can find further into the city. Residents in Mexico City are often told not to breathe when they go outside. The most common cause of urban flight in Mexico is therefore to escape the unhealthy environment. There are few urban services in the periphery such as electricity and piped water, but people do not suffer the problems of overcrowding, air pollution, chronic water shortages, and earthquake dangers.

Sierra Madre Oriental, Mexico

NASA Technical Reports Server (NTRS)

1985-01-01

This view of the Sierra Madre Oriental, Mexico (26.5N, 102.0W) west of Monclova, shows a mining region of northern Mexico. Mine tailings can be seen on the mountain slopes and in the valley floor. In addition to mining activity, several irrigated agricultural areas supporting the local communities can be seen in the area.

Techniques for plotting shadow patterns

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bainbridge, D.A.

1982-02-01

Basic approaches for plotting shadow patterns (summer or winter) are discussed, illustrated, and compared. The solar simulator technique uses floodlights or a moveable table to mimic the sun's path over a model of the building being studied. The drawback is that, for large developments, very small models would have to be built. Graphic solutions (2 types) are described in which: (1) sun angles are used to calculate shadow patterns using trigonometry and (2) drawings are made and shadows are calculated. Examples are given for a house on level ground and on sloping ground. Calculations of shade density are also illustrated.more » 8 references. (MJJ)« less

User Guide for the Plotting Software for the Los Alamos National Laboratory Nuclear Weapons Analysis Tools Version 2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cleland, Timothy James

The Los Alamos National Laboratory Plotting Software for the Nuclear Weapons Analysis Tools is a Java™ application based upon the open source library JFreeChart. The software provides a capability for plotting data on graphs with a rich variety of display options while allowing the viewer interaction via graph manipulation and scaling to best view the data. The graph types include XY plots, Date XY plots, Bar plots and Histogram plots.

Plot-scale effects on runoff and erosion along a slope degradation gradient

NASA Astrophysics Data System (ADS)

Moreno-de Las Heras, Mariano; Nicolau, José M.; Merino-MartíN, Luis; Wilcox, Bradford P.

2010-04-01

In Earth and ecological sciences, an important, crosscutting issue is the relationship between scale and the processes of runoff and erosion. In drylands, understanding this relationship is critical for understanding ecosystem functionality and degradation processes. Recent work has suggested that the effects of scale may differ depending on the extent of degradation. To test this hypothesis, runoff and sediment yield were monitored during a hydrological year on 20 plots of various lengths (1-15 m). These plots were located on a series of five reclaimed mining slopes in a Mediterranean-dry environment. The five slopes exhibited various degrees of vegetative cover and surface erosion. A general decrease of unit area runoff was observed with increasing plot scale for all slopes. Nevertheless, the amount of reinfiltrated runoff along each slope varied with the extent of degradation, being highest at the least degraded slope and vice versa. In other words, unit area runoff decreased the least on the most disturbed site as plot length increased. Unit area sediment yield declined with increasing plot length for the undisturbed and moderately disturbed sites, but it actually increased for the highly disturbed sites. The different scaling behavior of the most degraded slopes was especially clear under high-intensity rainfall conditions, when flow concentration favored rill erosion. Our results confirm that in drylands, the effects of scale on runoff and erosion change with the extent of degradation, resulting in a substantial loss of soil and water from disturbed systems, which could reinforce the degradation process through feedback mechanisms with vegetation.

Many Mexicos: An Artifact Exhibit on 7 Geographical and Cultural Regions of Mexico. Curriculum Projects. Fulbright-Hays Summer Seminars Abroad Program, 2002 (Mexico).

ERIC Educational Resources Information Center

Mountain, Victoria Snow

This project includes an assortment of artifacts designed to inform high school students about the variety of geographical and cultural regions of Mexico. The artifacts, derived from seven different geographical/cultural regions of Mexico, include maps, posters, objects that symbolize the regional culture, and typical regional costumes, music, and…

Activities toward Understanding Mexico's Transition to Democracy. Fulbright-Hays Summer Seminar Abroad 1996 (Mexico).

ERIC Educational Resources Information Center

Dombrowski, Teresa Turnbow

This unit for high school social studies and Spanish language students deals with Mexico's transition toward democracy. Lesson activities include: (1) "What Is An Early Democratic Family Incident That You Remember?"; (2) "What is Democracy?"; (3) "Locating the Five Nations of Mexico"; (4) "Scenes from the Five…

Impact of Animal Waste Application on Runoff Water Quality in Field Experimental Plots

PubMed Central

Hill, Dagne D.; Owens, William E.; Tchounwou, Paul B.

2005-01-01

Animal waste from dairy and poultry operations is an economical and commonly used fertilizer in the state of Louisiana. The application of animal waste to pasture lands not only is a source of fertilizer, but also allows for a convenient method of waste disposal. The disposal of animal wastes on land is a potential nonpoint source of water degradation. Water degradation and human health is a major concern when considering the disposal of large quantities of animal waste. The objective of this research was to determine the effect of animal waste application on biological (fecal coliform, Enterobacter spp. and Escherichia coli) and physical/chemical (temperature, pH, nitrate nitrogen, ammonia nitrogen, phosphate, copper, zinc, and sulfate) characteristics of runoff water in experimental plots. The effects of the application of animal waste have been evaluated by utilizing experimental plots and simulated rainfall events. Samples of runoff water were collected and analyzed for fecal coliforms. Fecal coliforms isolated from these samples were identified to the species level. Chemical analysis was performed following standard test protocols. An analysis of temperature, ammonia nitrogen, nitrate nitrogen, iron, copper, phosphate, potassium, sulfate, zinc and bacterial levels was performed following standard test protocols as presented in Standard Methods for the Examination of Water and Wastewater [1]. In the experimental plots, less time was required in the tilled broiler litter plots for the measured chemicals to decrease below the initial pre-treatment levels. A decrease of over 50% was noted between the first and second rainfall events for sulfate levels. This decrease was seen after only four simulated rainfall events in tilled broiler litter plots whereas broiler litter plots required eight simulated rainfall events to show this same type of reduction. A reverse trend was seen in the broiler litter plots and the tilled broiler plots for potassium. Bacteria numbers

[Amebiasis and amebic liver abscess in Mexico: a present-day public health problem].

PubMed

Escandón Romero, C; García Manzo, N T; Escobedo de la Peña, J; Hernández Ramos, J M; Olvera Alvarez, J; Cabral Soto, J

1996-01-01

Amebiasis still remains as a major public health problem in the world. It is one of the most common reasons for medical consult. There are more than half a million cases of amebiasis just at the Mexican Institute of the Social Security. There is still a lack of epidemiologic information on amebiasis in Mexico. To describe the secular trend fro amebiasis and for amebic liver abscess in the Mexican population, as well as in those covered by IMSS Solidaridad. An ecologic trend study was carried on. Incidence rate of amebiasis in all of its forms of presentation, and of amebic liver abscess, were plotted against each year for the 1986-1994 period. Amebiasis incidence in all of its forms of presentation showed a stable trend in this period, as it was seen with amebic liver abscess. Amebiasis is more common in the first years of life. On the contrary, amebic liver abscess showed an inverted 'J' pattern; its occurrence is higher in the extreme years of life. Fatality rates have shown a descendent trend. Amebiasis reflects socioeconomic conditions in Mexico and the fact that Mexican is still an endless culture. There is a need to promote health education, better diagnostic procedures and detection of asymptomatic carriers. Health policies for mothers that are asymptomatic carriers should be reviewed, due to the high rates of amebiasis and amebic liver abscess in children under one year of age.

Evaluation of New Mexico's anti-DWI efforts

DOT National Transportation Integrated Search

2000-02-01

This study is an assessment of the effects of the introduction of omnibus anti-DWI legislation in New Mexico. Several changes to New Mexico's DWI laws were introduced in the later half of 1993 and the beginning of 1994. New Mexico further initiated a...

United States-Mexico cross-border health insurance initiatives: Salud Migrante and Medicare in Mexico.

PubMed

Vargas Bustamante, Arturo; Laugesen, Miriam; Caban, Mabel; Rosenau, Pauline

2012-01-01

While U.S. health care reform will most likely reduce the overall number of uninsured Mexican-Americans, it does not address challenges related to health care coverage for undocumented Mexican immigrants, who will remain uninsured under the measures of the reform; documented low-income Mexican immigrants who have not met the five-year waiting period required for Medicaid benefits; or the growing number of retired U.S. citizens living in Mexico, who lack easy access to Medicare-supported services. This article reviews two promising binational initiatives that could help address these challenges-Salud Migrante and Medicare in Mexico; discusses their prospective applications within the context of U.S. health care reform; and identifies potential challenges to their implementation (legal, political, and regulatory), as well as the possible benefits, including coverage of uninsured Mexican immigrants, and their integration into the U.S. health care system (through Salud Migrante), and access to lower-cost Medicare-supported health care for U.S. retirees in Mexico (Medicare in Mexico).

United States-Mexico cross-border health insurance initiatives: Salud Migrante and Medicare in Mexico

PubMed Central

Bustamante, Arturo Vargas; Laugesen, Miriam; Caban, Mabel; Rosenau, Pauline

2014-01-01

While U.S. health care reform will most likely reduce the overall number of uninsured Mexican-Americans, it does not address challenges related to health care coverage for undocumented Mexican immigrants, who will remain uninsured under the measures of the reform; documented low-income Mexican immigrants who have not met the five-year waiting period required for Medicaid benefits; or the growing number of retired U.S. citizens living in Mexico, who lack easy access to Medicare-supported services. This article reviews two promising binational initiatives that could help address these challenges—Salud Migrante and Medicare in Mexico; discusses their prospective applications within the context of U.S. health care reform; and identifies potential challenges to their implementation (legal, political, and regulatory), as well as the possible benefits, including coverage of uninsured Mexican immigrants, and their integration into the U.S. health care system (through Salud Migrante), and access to lower-cost Medicare-supported health care for U.S. retirees in Mexico (Medicare in Mexico). PMID:22427168

Do Plot Studies Generate “Directionally” Correct Assessments of Field Level Phosphorus Losses?

USDA-ARS?s Scientific Manuscript database

The National P Research Project (NPRP) coordinated a tremendous amount of research at the plot scale to assess the influence of nutrient management on P transport at the fields scale. The objectives of this research were to determine of plot scale rainfall simulations could be used to assess P trans...

Automatic extraction of plots from geo-registered UAS imagery of crop fields with complex planting schemes

NASA Astrophysics Data System (ADS)

Hearst, Anthony A.

Complex planting schemes are common in experimental crop fields and can make it difficult to extract plots of interest from high-resolution imagery of the fields gathered by Unmanned Aircraft Systems (UAS). This prevents UAS imagery from being applied in High-Throughput Precision Phenotyping and other areas of agricultural research. If the imagery is accurately geo-registered, then it may be possible to extract plots from the imagery based on their map coordinates. To test this approach, a UAS was used to acquire visual imagery of 5 ha of soybean fields containing 6.0 m2 plots in a complex planting scheme. Sixteen artificial targets were setup in the fields before flights and different spatial configurations of 0 to 6 targets were used as Ground Control Points (GCPs) for geo-registration, resulting in a total of 175 geo-registered image mosaics with a broad range of geo-registration accuracies. Geo-registration accuracy was quantified based on the horizontal Root Mean Squared Error (RMSE) of targets used as checkpoints. Twenty test plots were extracted from the geo-registered imagery. Plot extraction accuracy was quantified based on the percentage of the desired plot area that was extracted. It was found that using 4 GCPs along the perimeter of the field minimized the horizontal RMSE and enabled a plot extraction accuracy of at least 70%, with a mean plot extraction accuracy of 92%. Future work will focus on further enhancing the plot extraction accuracy through additional image processing techniques so that it becomes sufficiently accurate for all practical purposes in agricultural research and potentially other areas of research.

SPRUCE Hollow Elevation Data for Experimental Plots Beginning in 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffiths, N. A.; Sebestyen, S. D.

2017-01-01

This data set provides hollow elevation data for the 17 SPRUCE experimental plots in the S1 bog on the Marcell Experimental Forest. Hollows were selected for measurement by walking along each octagonal boardwalk segment in a plot and identifying where a hollow intersected the boardwalk. The vertical distance between the surface of the boardwalk (with a known elevation) and the surface of the hollow was measured and the absolute elevation (in meters amsl) of the hollow surface was calculated. The hollow elevation measurements were carried out in October 2015, May 2016, and October 2016. These measurements will be repeated annuallymore » or more frequently.« less

On the role of final-state interactions in Dalitz plot studies

NASA Astrophysics Data System (ADS)

Kubis, Bastian; Niecknig, Franz; Schneider, Sebastian P.

2012-04-01

The study of Dalitz plots of heavy-meson decays to multi-hadron final states has received intensified interest by the possibility to gain access to precision investigations of CP violation. A thorough understanding of the hadronic final-state interactions is a prerequisite to achieve a highly sensitive, model-independent study of such Dalitz plots. We illustrate some of the theoretical tools, predominantly taken from dispersion theory, available for these and related purposes, and discuss the low-energy decays ω,ϕ→3π in some more detail.

Three-dimensional reconstruction of single-cell chromosome structure using recurrence plots.

PubMed

Hirata, Yoshito; Oda, Arisa; Ohta, Kunihiro; Aihara, Kazuyuki

2016-10-11

Single-cell analysis of the three-dimensional (3D) chromosome structure can reveal cell-to-cell variability in genome activities. Here, we propose to apply recurrence plots, a mathematical method of nonlinear time series analysis, to reconstruct the 3D chromosome structure of a single cell based on information of chromosomal contacts from genome-wide chromosome conformation capture (Hi-C) data. This recurrence plot-based reconstruction (RPR) method enables rapid reconstruction of a unique structure in single cells, even from incomplete Hi-C information.

Three-dimensional reconstruction of single-cell chromosome structure using recurrence plots

NASA Astrophysics Data System (ADS)

Hirata, Yoshito; Oda, Arisa; Ohta, Kunihiro; Aihara, Kazuyuki

2016-10-01

Single-cell analysis of the three-dimensional (3D) chromosome structure can reveal cell-to-cell variability in genome activities. Here, we propose to apply recurrence plots, a mathematical method of nonlinear time series analysis, to reconstruct the 3D chromosome structure of a single cell based on information of chromosomal contacts from genome-wide chromosome conformation capture (Hi-C) data. This recurrence plot-based reconstruction (RPR) method enables rapid reconstruction of a unique structure in single cells, even from incomplete Hi-C information.

A MS-lesion pattern discrimination plot based on geostatistics.

PubMed

Marschallinger, Robert; Schmidt, Paul; Hofmann, Peter; Zimmer, Claus; Atkinson, Peter M; Sellner, Johann; Trinka, Eugen; Mühlau, Mark

2016-03-01

A geostatistical approach to characterize MS-lesion patterns based on their geometrical properties is presented. A dataset of 259 binary MS-lesion masks in MNI space was subjected to directional variography. A model function was fit to express the observed spatial variability in x, y, z directions by the geostatistical parameters Range and Sill. Parameters Range and Sill correlate with MS-lesion pattern surface complexity and total lesion volume. A scatter plot of ln(Range) versus ln(Sill), classified by pattern anisotropy, enables a consistent and clearly arranged presentation of MS-lesion patterns based on geometry: the so-called MS-Lesion Pattern Discrimination Plot. The geostatistical approach and the graphical representation of results are considered efficient exploratory data analysis tools for cross-sectional, follow-up, and medication impact analysis.

On the Error of the Dixon Plot for Estimating the Inhibition Constant between Enzyme and Inhibitor

ERIC Educational Resources Information Center

Fukushima, Yoshihiro; Ushimaru, Makoto; Takahara, Satoshi

2002-01-01

In textbook treatments of enzyme inhibition kinetics, adjustment of the initial inhibitor concentration for inhibitor bound to enzyme is often neglected. For example, in graphical plots such as the Dixon plot for estimation of an inhibition constant, the initial concentration of inhibitor is usually plotted instead of the true inhibitor…

The Application of TD/GC/NICI-MS with an Al2O3-PLOT-S Column for the Determination of Perfluoroalkylcycloalkanes in the Atmosphere.

PubMed

Ren, Yu; Schlager, Hans; Martin, Damien

2014-01-01

A modified method for the quantitative determination of atmospheric perfluoroalkylcycloalkanes (PFCs) using thermal desorption coupled with gas chromatography and detection by negative ion chemical ionization-mass spectrometry was developed. Using an optimized analytical system, a commercially available Al 2 O 3 porous layer open tubular (PLOT) capillary column (30 m × 0.25 mm) deactivated with Na 2 SO 4 was used for separation of PFCs. Improvements in the separation of PFCs, the corresponding identification and the limit of detection of PFCs using this method and column are presented. The method was successfully applied to determine the atmospheric background concentrations of a range of PFCs from a number of samples collected at a rural site in Germany. The results of this study suggest that the method outlined using the Al 2 O 3 -PLOT-S capillary column has good sensitivity and selectivity, and that it can be deployed in a routine laboratory process for the analysis of PFCs in the future research work. In addition, the ability of this column to separate the isomers of one of the lower boiling PFCs (perfluorodimethylcyclobutane) and its ability to resolve perfluoroethylcyclohexane offer the opportunity for single-column analysis for multiple PFCs.

GenomeD3Plot: a library for rich, interactive visualizations of genomic data in web applications.

PubMed

Laird, Matthew R; Langille, Morgan G I; Brinkman, Fiona S L

2015-10-15

A simple static image of genomes and associated metadata is very limiting, as researchers expect rich, interactive tools similar to the web applications found in the post-Web 2.0 world. GenomeD3Plot is a light weight visualization library written in javascript using the D3 library. GenomeD3Plot provides a rich API to allow the rapid visualization of complex genomic data using a convenient standards based JSON configuration file. When integrated into existing web services GenomeD3Plot allows researchers to interact with data, dynamically alter the view, or even resize or reposition the visualization in their browser window. In addition GenomeD3Plot has built in functionality to export any resulting genome visualization in PNG or SVG format for easy inclusion in manuscripts or presentations. GenomeD3Plot is being utilized in the recently released Islandviewer 3 (www.pathogenomics.sfu.ca/islandviewer/) to visualize predicted genomic islands with other genome annotation data. However, its features enable it to be more widely applicable for dynamic visualization of genomic data in general. GenomeD3Plot is licensed under the GNU-GPL v3 at https://github.com/brinkmanlab/GenomeD3Plot/. brinkman@sfu.ca. © The Author 2015. Published by Oxford University Press.

Maintaining a permanent plot data base for growth and yield research: Solutions to some recurring problems

Treesearch

John C. Byrne

1993-01-01

Methods for solving some recurring problems of maintaining a permanent plot data base for growth and yield reseuch are described. These methods include documenting data from diverse sampling designs, changing sampling designs, changing field procedures, and coordinating activities in the plots with the land management agency. Managing a permanent plot data base (...

Practical Considerations When Using Perturbed Forest Inventory Plot Locations To Develop Spatial Models: A Case Study

Treesearch

John W. Coulston; Gregory A. Reams; Ronald E. McRoberts; William D. Smith

2006-01-01

U.S. Department of Agriculture Forest Service Forest Inventory and Analysis plot information is used in many capacities including timber inventories, forest health assessments, and environmental risk analyses. With few exceptions, actual plot locations cannot be revealed to the general public. The public does, however, have access to perturbed plot coordinates. The...

Social-group identity and population substructure in admixed populations in New Mexico and Latin America

PubMed Central

Healy, Meghan E.; Hill, Deirdre; Berwick, Marianne; Edgar, Heather; Gross, Jessica

2017-01-01

We examined the relationship between continental-level genetic ancestry and racial and ethnic identity in an admixed population in New Mexico with the goal of increasing our understanding of how racial and ethnic identity influence genetic substructure in admixed populations. Our sample consists of 98 New Mexicans who self-identified as Hispanic or Latino (NM-HL) and who further categorized themselves by race and ethnic subgroup membership. The genetic data consist of 270 newly-published autosomal microsatellites from the NM-HL sample and previously published data from 57 globally distributed populations, including 13 admixed samples from Central and South America. For these data, we 1) summarized the major axes of genetic variation using principal component analyses, 2) performed tests of Hardy Weinberg equilibrium, 3) compared empirical genetic ancestry distributions to those predicted under a model of admixture that lacked substructure, 4) tested the hypotheses that individuals in each sample had 100%, 0%, and the sample-mean percentage of African, European, and Native American ancestry. We found that most NM-HL identify themselves and their parents as belonging to one of two groups, conforming to a region-specific narrative that distinguishes recent immigrants from Mexico from individuals whose families have resided in New Mexico for generations and who emphasize their Spanish heritage. The “Spanish” group had significantly lower Native American ancestry and higher European ancestry than the “Mexican” group. Positive FIS values, PCA plots, and heterogeneous ancestry distributions suggest that most Central and South America admixed samples also contain substructure, and that this substructure may be related to variation in social identity. Genetic substructure appears to be common in admixed populations in the Americas and may confound attempts to identify disease-causing genes and to understand the social causes of variation in health outcomes and

Social-group identity and population substructure in admixed populations in New Mexico and Latin America.

PubMed

Healy, Meghan E; Hill, Deirdre; Berwick, Marianne; Edgar, Heather; Gross, Jessica; Hunley, Keith

2017-01-01

We examined the relationship between continental-level genetic ancestry and racial and ethnic identity in an admixed population in New Mexico with the goal of increasing our understanding of how racial and ethnic identity influence genetic substructure in admixed populations. Our sample consists of 98 New Mexicans who self-identified as Hispanic or Latino (NM-HL) and who further categorized themselves by race and ethnic subgroup membership. The genetic data consist of 270 newly-published autosomal microsatellites from the NM-HL sample and previously published data from 57 globally distributed populations, including 13 admixed samples from Central and South America. For these data, we 1) summarized the major axes of genetic variation using principal component analyses, 2) performed tests of Hardy Weinberg equilibrium, 3) compared empirical genetic ancestry distributions to those predicted under a model of admixture that lacked substructure, 4) tested the hypotheses that individuals in each sample had 100%, 0%, and the sample-mean percentage of African, European, and Native American ancestry. We found that most NM-HL identify themselves and their parents as belonging to one of two groups, conforming to a region-specific narrative that distinguishes recent immigrants from Mexico from individuals whose families have resided in New Mexico for generations and who emphasize their Spanish heritage. The "Spanish" group had significantly lower Native American ancestry and higher European ancestry than the "Mexican" group. Positive FIS values, PCA plots, and heterogeneous ancestry distributions suggest that most Central and South America admixed samples also contain substructure, and that this substructure may be related to variation in social identity. Genetic substructure appears to be common in admixed populations in the Americas and may confound attempts to identify disease-causing genes and to understand the social causes of variation in health outcomes and social

Digital archive of drilling mud weight pressures and wellbore temperatures from 49 regional cross sections of 967 well logs in Louisiana and Texas, onshore Gulf of Mexico basin

USGS Publications Warehouse

Burke, Lauri A.; Kinney, Scott A.; Kola-Kehinde, Temidayo B.

2011-01-01

This document provides the digital archive of in-situ temperature and drilling mud weight pressure data that were compiled from several historical sources. The data coverage includes the states of Texas and Louisiana in the Gulf of Mexico basin. Data are also provided graphically, for both Texas and Louisiana, as plots of temperature as a function of depth and pressure as a function of depth. The minimum, arithmetic average, and maximum values are tabulated for each 1,000-foot depth increment for temperature as well as pressure in the Texas and Louisiana data.

9 CFR 108.3 - Preparation of plot plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Preparation of plot plans. 108.3 Section 108.3 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... all buildings so that they may be correlated with the respective blueprints and legends. (e) Describe...

A method for analyzing temporal patterns of variability of a time series from Poincare plots.

PubMed

Fishman, Mikkel; Jacono, Frank J; Park, Soojin; Jamasebi, Reza; Thungtong, Anurak; Loparo, Kenneth A; Dick, Thomas E

2012-07-01

The Poincaré plot is a popular two-dimensional, time series analysis tool because of its intuitive display of dynamic system behavior. Poincaré plots have been used to visualize heart rate and respiratory pattern variabilities. However, conventional quantitative analysis relies primarily on statistical measurements of the cumulative distribution of points, making it difficult to interpret irregular or complex plots. Moreover, the plots are constructed to reflect highly correlated regions of the time series, reducing the amount of nonlinear information that is presented and thereby hiding potentially relevant features. We propose temporal Poincaré variability (TPV), a novel analysis methodology that uses standard techniques to quantify the temporal distribution of points and to detect nonlinear sources responsible for physiological variability. In addition, the analysis is applied across multiple time delays, yielding a richer insight into system dynamics than the traditional circle return plot. The method is applied to data sets of R-R intervals and to synthetic point process data extracted from the Lorenz time series. The results demonstrate that TPV complements the traditional analysis and can be applied more generally, including Poincaré plots with multiple clusters, and more consistently than the conventional measures and can address questions regarding potential structure underlying the variability of a data set.

A tool to determine crown and plot canopy transparency for forest inventory and analysis phase 3 plots using digital photographs

Treesearch

Matthew F. Winn; Philip A. Araman

2012-01-01

The USDA Forest Service Forest Inventory and Analysis (FIA) program collects crown foliage transparency estimates for individual trees on Phase 3 (P3) inventory plots. The FIA crown foliage estimate is obtained from a pair of perpendicular side views of the tree. Researchers with the USDA Forest Service Southern Research Station have developed a computer program that...

Field Testing New Plot Designs and Methods for Determining Hydrophytic Vegetation during Wetland Delineations in the United States

DTIC Science & Technology

2014-03-01

Trees and woody vines are sampled in large plots with 9 m (30 ft) radii. Saplings, shrubs , and herbs are sampled in nested smaller plots with 2 m (5 ft... woody vines in 9 m (30 ft) radius plots and saplings, shrubs , and herbaceous species in 2 m (5 ft) radius plots. In herbaceous meadows, only the 2 m (5...suggests stratifying vegetation by growth forms of trees, shrubs , herbs, and vines and sampling plant communities by using nested circular plots

Adding uncertainty to forest inventory plot locations: effects on analyses using geospatial data

Treesearch

Alexia A. Sabor; Volker C. Radeloff; Ronald E. McRoberts; Murray Clayton; Susan I. Stewart

2007-01-01

The Forest Inventory and Analysis (FIA) program of the USDA Forest Service alters plot locations before releasing data to the public to ensure landowner confidentiality and sample integrity, but using data with altered plot locations in conjunction with other spatially explicit data layers produces analytical results with unknown amounts of error. We calculated the...

SPRUCE Epiphytic Lichen Annual Biomass Growth in Experimental Plots, 2013-2016.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, R.J.; Nelson, P.R.; Jovan, S.

This data set provides annual biomass growth rates of epiphytic lichen transplants in the SPRUCE experimental plots at the S1 Bog of the Marcell Experimental Forest. Epiphytic lichens (Evernia mesomorpha, a boreal forest indicator species) were collected at S1 Bog outside the experimental enclosures and mounted on Picea mariana branches inside the 10 experimental enclosures and the 2 ambient plots without enclosures using transplant techniques. Lichen transplants were weighed annually, in August of 2013-2016, to measure biomass growth rates as a function of experimental temperature and CO2 treatments.

Mosses new to New Mexico

USDA-ARS?s Scientific Manuscript database

A bryophyte inventory was conducted in the Valles Caldera National Preserve (VCNP), New Mexico, from 2009 to 2011. Specimens representing 113 species of bryophytes were collected. Of those bryophytes, seven of the mosses were new to New Mexico: Atrichum tenellum (Rohling) Bruch & Schimper, Dicranum ...

Mexico's immunization programme gets results.

PubMed

1994-04-01

With a decline of almost 60% over the past decade in the mortality of children under age 5 years old to the current rate of 33 child deaths/1000 live births, Mexico has joined the 20 countries listed by UNICEF as making the most progress in reducing child mortality since 1980. Much of this progress can be attributed to Mexico's immunization program, which has brought the proportion of fully immunized children under age 5 years to 94% over the past 5 years. Mexico's president has been instrumental in the program's success, having a personal interest in childhood vaccination and supervising the twice-yearly immunization coverage surveys. Even though presidential elections are being held this year, the immunization program should remain strong regardless of who wins because all of Mexico's political parties have pledged to remain committed to immunization. Awareness in the population about the need for vaccination is maintained with the help of the mass media, especially radio and television. The country's enthusiasm for vaccination seems to be paying off in terms of declining child mortality and the eradication of wild poliovirus. The immunization program reaches all but 2-3% of Mexico's children, despite some logistical difficulties and resistance to vaccines among certain religious groups such as the Mennonites and Jehovah's witnesses.

Measurement of the ω → π+π-π0 Dalitz plot distribution

NASA Astrophysics Data System (ADS)

Adlarson, P.; Augustyniak, W.; Bardan, W.; Bashkanov, M.; Bergmann, F. S.; Berłowski, M.; Bhatt, H.; Bondar, A.; Büscher, M.; Calén, H.; Ciepał, I.; Clement, H.; Czerwiński, E.; Demmich, K.; Engels, R.; Erven, A.; Erven, W.; Eyrich, W.; Fedorets, P.; Föhl, K.; Fransson, K.; Goldenbaum, F.; Goswami, A.; Grigoryev, K.; Gullström, C.-O.; Heijkenskjöld, L.; Hejny, V.; Hüsken, N.; Jarczyk, L.; Johansson, T.; Kamys, B.; Kemmerling, G.; Khan, F. A.; Khatri, G.; Khoukaz, A.; Khreptak, O.; Kirillov, D. A.; Kistryn, S.; Kleines, H.; Kłos, B.; Krzemień, W.; Kulessa, P.; Kupść, A.; Kuzmin, A.; Lalwani, K.; Lersch, D.; Lorentz, B.; Magiera, A.; Maier, R.; Marciniewski, P.; Mariański, B.; Morsch, H.-P.; Moskal, P.; Ohm, H.; Perez del Rio, E.; Piskunov, N. M.; Prasuhn, D.; Pszczel, D.; Pysz, K.; Pyszniak, A.; Ritman, J.; Roy, A.; Rudy, Z.; Rundel, O.; Sawant, S.; Schadmand, S.; Schätti-Ozerianska, I.; Sefzick, T.; Serdyuk, V.; Shwartz, B.; Sitterberg, K.; Skorodko, T.; Skurzok, M.; Smyrski, J.; Sopov, V.; Stassen, R.; Stepaniak, J.; Stephan, E.; Sterzenbach, G.; Stockhorst, H.; Ströher, H.; Szczurek, A.; Trzciński, A.; Varma, R.; Wolke, M.; Wrońska, A.; Wüstner, P.; Yamamoto, A.; Zabierowski, J.; Zieliński, M. J.; Złomańczuk, J.; Żuprański, P.; Żurek, M.; Kubis, B.; Leupold, S.

2017-07-01

Using the production reactions pd →3He ω and pp → ppω, the Dalitz plot distribution for the ω →π+π-π0 decay is studied with the WASA detector at COSY, based on a combined data sample of (4.408 ± 0.042) ×104 events. The Dalitz plot density is parametrised by a product of the P-wave phase space and a polynomial expansion in the normalised polar Dalitz plot variables Z and ϕ. For the first time, a deviation from pure P-wave phase space is observed with a significance of 4.1σ. The deviation is parametrised by a linear term 1 + 2 αZ, with α determined to be + 0.147 ± 0.036, consistent with the expectations of ρ-meson-type final-state interactions of the P-wave pion pairs.

Intensive Site 1 Vegetation Plot Photos 2012

DOE Data Explorer

Norby, Richard; Sloan, Victoria

2015-04-02

Photographs were taken on 24th June, 15th July and 17th August 2012, using a Canon Ixus 70 7.1 megapixel digital camera. Photographs were taken during the recording of weekly soil moisture, temperature and thaw depth measurements (Sloan et al., 2014), over a time period spanning approximately 6 hours on each day. Photographs were taken from positions where matted trail allowed access to vegetation plots.

The Power of Refutational Text: Changing Intuitions about the Interpretation of Box Plots

ERIC Educational Resources Information Center

Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

2017-01-01

Graphicacy is an important skill in today's society; however, the interpretation of graphs proofs to be more difficult than it might seem. In this study, we focus on one specific misinterpretation, the area misinterpretation of box plots, which is caused by incorrect heuristic processing of salient features of the box plot. In this study, we tried…

New Mexico Indian Education Directory, 1986-1987.

ERIC Educational Resources Information Center

Oyengue-Salazar, Rena; Vigil, Priscilla

A comprehensive list of officials and programs with responsibility for all levels of Indian education in New Mexico is provided in this directory. Names, titles, addresses, and phone numbers are provided. Information is listed under the following headings: New Mexico State Board of Education, New Mexico State Department of Education/Indian School…

The Brazilian national system of forest permanent plots

Treesearch

Yeda Maria Malheiros de Oliveira; Maria Augusta Doetzer Rosot; Patricia Povoa de Mottos; Joberto Veloso de Freitas; Guilherme Luis Augusto Gomide; < i> et al< /i>

2009-01-01

The Brazilian National System of Forest Permanent Plots (SisPP) is a governmental initiative designed and being implemented in partnership by the Ministry of Environment (MMA), represented by the National Forest Programme (PNF) and the Brazilian Forest Service (SFB) and the Embrapa Forestry (a research center of the Brazilian Agricultural Research Corporation - Embrapa...

Box-and-Whisker Plots Applied to Food Chemistry

ERIC Educational Resources Information Center

Ferreira, Joao E. V.; Miranda, Ricardo M.; Figueiredo, Antonio F.; Barbosa, Jardel P.; Brasil, Edykarlos M.

2016-01-01

Box-and-whisker plots or simply boxplots are powerful graphical representations that give an overview of a data set. In this work five different examples illustrate the applications of boxplots in food chemistry. The examples involve relative sweetness of sugars and sugar alcohols with respect to sucrose, the potassium content of fruits and…

The Struggle of Rural Mexico.

ERIC Educational Resources Information Center

Esteva, Gustavo; And Others

Diverse aspects of rural problems and the social organization of Mexican labor are explored in this summary of Mexican rural history. Achnowledging Mexico's rich, unexhausted, and unexplored natural resources, Mexico is described as a poverty-stricken, hungry nation, with high degrees of malnutrition, deprivation, and illiteracy heavily…

76 FR 64327 - Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Gulf of Mexico Reef Fish Fishery...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... Drum, Reef Fish, Shrimp, and Coral and Coral Reefs Fishery Management Plans (Generic ACL Amendment) for... the Caribbean, Gulf of Mexico, and South Atlantic; Gulf of Mexico Reef Fish Fishery; South Atlantic... management unit in the Fishery Management Plan for Reef Fish Resources of the Gulf of Mexico (Reef Fish FMP...

Using T-Z plots as a graphical method to infer lithological variations from growth strata

NASA Astrophysics Data System (ADS)

Castelltort, Sébastien; Pochat, Stéphane; Van Den Driessche, Jean

2004-08-01

The 'T-Z plot' method consists of plotting the throw of sedimentary horizons across a growth fault versus their depth in the hanging wall. This method has been initially developed for the analysis of growth fault kinematics from seismic data. A brief analytical examination of such plots shows that they can also provide valuable information about the evolution of fault topography. When growth is a continuous process, stages of topography creation (fault scarp) and filling (of the space available in the hanging-wall) are related to non-dynamic (draping, mud-prone pelagic settling) and dynamic (sand-prone, dynamically deposited) sedimentation, respectively. In this case, the T-Z plot analysis becomes a powerful tool to predict major lithological variations on seismic profiles in faulted settings.

The isometric log-ratio (ilr)-ion plot: A proposed alternative to the Piper diagram

USGS Publications Warehouse

Shelton, Jenna L.; Engle, Mark A.; Buccianti, Antonella; Blondes, Madalyn S.

2018-01-01

The Piper diagram has been a staple for the analysis of water chemistry data since its introduction in 1944. It was conceived to be a method for water classification, determination of potential water mixing between end-members, and to aid in the identification of chemical reactions controlling a sample set. This study uses the information gleaned over the years since the release of the Piper diagram and proposes an alternative to it, capturing the strengths of the original diagram while adding new ideas to increase its robustness. The new method uses compositional data analysis to create 4 isometric log-ratio coordinates for the 6 major chemical species analyzed in the Piper diagram and transforms the data to a 4-field bi-plot, the ilr-ion plot. This ilr-ion plot conveys all of the information in the Piper diagram (water mixing, water types, and chemical reactions) while also visualizing additional data, the ability to examine Ca2+/Mg2+ versus Cl-/SO42−. The Piper and the ilr-ion plot were also compared using multiple synthetic and real datasets in order to illustrate the caveats and the advantages of using either diagram to analyze water chemistry data. Although there are challenges with using the ilr-ion plot (e.g., missing or zero values zeros in the dataset must be imputed by positive real numbers), it appears that the use of compositional data analysis coupled with the ilr-ion plot provides a more in-depth and complete analysis of water quality data compared to the original Piper diagram.

76 FR 78245 - Fisheries of the Caribbean, Gulf of Mexico, and South Atlantic; Gulf of Mexico Reef Fish Fishery...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... Coral and Coral Reefs FMPs (Generic ACL Amendment) for purposes of review by the Secretary under the... the Caribbean, Gulf of Mexico, and South Atlantic; Gulf of Mexico Reef Fish Fishery; South Atlantic... the FMP for Reef Fish Resources of the Gulf of Mexico (Reef Fish FMP). DATES: This action is effective...

Calibration of multivariate scatter plots for exploratory analysis of relations within and between sets of variables in genomic research.

PubMed

Graffelman, Jan; van Eeuwijk, Fred

2005-12-01

The scatter plot is a well known and easily applicable graphical tool to explore relationships between two quantitative variables. For the exploration of relations between multiple variables, generalisations of the scatter plot are useful. We present an overview of multivariate scatter plots focussing on the following situations. Firstly, we look at a scatter plot for portraying relations between quantitative variables within one data matrix. Secondly, we discuss a similar plot for the case of qualitative variables. Thirdly, we describe scatter plots for the relationships between two sets of variables where we focus on correlations. Finally, we treat plots of the relationships between multiple response and predictor variables, focussing on the matrix of regression coefficients. We will present both known and new results, where an important original contribution concerns a procedure for the inclusion of scales for the variables in multivariate scatter plots. We provide software for drawing such scales. We illustrate the construction and interpretation of the plots by means of examples on data collected in a genomic research program on taste in tomato.

American Armed Forces in Mexico? Not Any Time Soon

DTIC Science & Technology

2011-10-28

1848. U.S. declared war, invaded/operated in Mexico for 18 months, and occupied Mexico City. The Hidalgo treaty was signed in February 1848 ending...Mexico." January 2011. http://www.hrw.org/sites/default/files/related_material/mexico_2.pdf (accessed October 23, 2011): 1-2. 44. Mary Beth...Corporation, 2009. Sheridan, Mary Beth. "Clinton vows support for Mexico in drug war, urges progress on rights." The Washington Post, January 24, 2011

77 FR 20690 - Environmental Impact Statement: Albuquerque, New Mexico

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-05

...: Albuquerque, New Mexico AGENCY: Federal Highway Administration (FHWA), USDOT. ACTION: Rescind Notice of Intent... proposed improvements to the Interstate 25 and Paseo del Norte Interchange in Albuquerque, New Mexico. FOR... Mexico Division, 4001 Office Court Drive, Suite 801, Santa Fe, New Mexico 87507, Telephone (505) 820-2027...

76 FR 31299 - Northern New Mexico Resource Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... DEPARTMENT OF AGRICULTURE Forest Service Northern New Mexico Resource Advisory Committee AGENCY... Mexico Resource Advisory Committee (NNM RAC) will meet in Albuquerque, New Mexico. The committee is... Road Taos, New Mexico. Please call ahead to 575- 758-6344 to facilitate entry into the building to view...

Identifying hidden common causes from bivariate time series: a method using recurrence plots.

PubMed

Hirata, Yoshito; Aihara, Kazuyuki

2010-01-01

We propose a method for inferring the existence of hidden common causes from observations of bivariate time series. We detect related time series by excessive simultaneous recurrences in the corresponding recurrence plots. We also use a noncoverage property of a recurrence plot by the other to deny the existence of a directional coupling. We apply the proposed method to real wind data.

Assessing the extent and diversity of riparian ecosystems in Sonora, Mexico

USGS Publications Warehouse

Scott, M.L.; Nagler, P.L.; Glenn, E.P.; Valdes-Casillas, C.; Erker, J.A.; Reynolds, E.W.; Shafroth, P.B.; Gomez-Limon, E.; Jones, C.L.

2009-01-01

Conservation of forested riparian ecosystems is of international concern. Relatively little is known of the structure, composition, diversity, and extent of riparian ecosystems in Mexico. We used high- and low-resolution satellite imagery from 2000 to 2006, and ground-based sampling in 2006, to assess the spatial pattern, extent, and woody plant composition of riparian forests across a range of spatial scales for the state of Sonora, Mexico. For all 3rd and higher order streams, river bottomlands with riparian forests occupied a total area of 2,301 km2. Where forested bottomlands remained, on average, 34% of the area had been converted to agriculture while 39% remained forested. We estimated that the total area of riparian forest along the principal streams was 897 km2. Including fencerow trees, the total forested riparian area was 944 km2, or 0.5% of the total land area of Sonora. Ground-based sampling of woody riparian vegetation consisted of 92, 50 m radius circular plots. About 79 woody plant species were noted. The most important tree species, based on cover and frequency, were willow species Salix spp. (primarily S. goodingii and S. bonplandiana), mesquite species Prosopis spp. (primarily P. velutina), and Fremont cottonwood Populus fremontii. Woody riparian taxa at the reach scale showed a trend of increasing diversity from north to south within Sonora. Species richness was greatest in the willow-bald cypress Taxodium distichum var. mexicanum-Mexican cottonwood P. mexicana subsp. dimorphia ecosystem. The non-native tamarisk Tamarix spp. was rare, occurring at just three study reaches. Relatively natural stream flow patterns and fluvial disturbance regimes likely limit its establishment and spread. ?? 2008 Springer Science + Business Media BV.

Mesozoic Continental Sediment-dispersal Systems of Mexico Linked to Development of the Gulf of Mexico

NASA Astrophysics Data System (ADS)

Lawton, T. F.; Molina-Garza, R. S.; Barboza-Gudiño, R.; Rogers, R. D.

2013-05-01

Major sediment dispersal systems on western Pangea evolved in concert with thermal uplift, rift and drift phases of the Gulf of Mexico Basin, and were influenced by development of a continental arc on Pangea's western margin. Existing literature and preliminary data from fieldwork, sandstone petrology and detrital zircon analysis reveal how major drainages in Mexico changed from Late Triassic through Late Jurassic time and offer predictions for the ultimate destinations of sand-rich detritus along the Gulf and paleo-Pacific margins. Late Triassic rivers drained away from and across the present site of the Gulf of Mexico, which was then the location of a major thermal dome, the Texas uplift of recent literature. These high-discharge rivers with relatively mature sediment composition fed a large-volume submarine fan system on the paleo-Pacific continental margin of Mexico. Predictably, detrital zircon age populations are diverse and record sources as far away as the Amazonian craton. This enormous fluvial system was cut off abruptly near the Triassic-Jurassic boundary by extensive reorganization of continental drainages. Early and Middle Jurassic drainage systems had local headwaters and deposited sediment in extensional basins associated with arc magmatism. Redbeds accumulated across northern and eastern Mexico and Chiapas in long, narrow basins whose locations and dimensions are recorded primarily by inverted antiformal massifs. The Jurassic continental successions overlie Upper Triassic strata and local subvolcanic plutons; they contain interbedded volcanic rocks and thus have been interpreted as part of the Nazas continental-margin arc. The detritus of these fluvial systems is volcanic-lithic; syndepositional grain ages are common in the detrital zircon populations, which are mixed with Oaxaquia-derived Permo-Triassic and Grenville age populations. By this time, interior Pangea no longer supplied sediment to the paleo-Pacific margin, possibly because the

Insights into gait disorders: walking variability using phase plot analysis, Huntington's disease.

PubMed

Collett, Johnny; Esser, Patrick; Khalil, Hanan; Busse, Monica; Quinn, Lori; DeBono, Katy; Rosser, Anne; Nemeth, Andrea H; Dawes, Helen

2014-09-01

Huntington's disease (HD) is a progressive inherited neurodegenerative disorder. Identifying sensitive methodologies to quantitatively measure early motor changes have been difficult to develop. This exploratory observational study investigated gait variability and symmetry in HD using phase plot analysis. We measured the walking of 22 controls and 35 HD gene carriers (7 premanifest (PreHD)), 16 early/mid (HD1) and 12 late stage (HD2) in Oxford and Cardiff, UK. The unified Huntington's disease rating scale-total motor scores (UHDRS-TMS) and disease burden scores (DBS) were used to quantify disease severity. Data was collected during a clinical walk test (8.8 or 10 m) using an inertial measurement unit attached to the trunk. The 6 middle strides were used to calculate gait variability determined by spatiotemporal parameters (co-efficient of variation (CoV)) and phase plot analysis. Phase plots considered the variability in consecutive wave forms from vertical movement and were quantified by SDA (spatiotemporal variability), SDB (temporal variability), ratio ∀ (ratio SDA:SDB) and Δangleβ (symmetry). Step time CoV was greater in manifest HD (p<0.01, both manifest groups) than controls, as was stride length CoV for HD2 (p<0.01). No differences were found in spatiotemporal variability between PreHD and controls (p>0.05). Phase plot analysis identified differences between manifest HD and controls for SDB, Ratio ∀ and Δangle (all p<0.01, both manifest groups). Furthermore Ratio ∀ was smaller in PreHD compared with controls (p<0.01). Ratio ∀ also produced the strongest correlation with UHDRS-TMS (r=-0.61, p<0.01) and was correlated with DBS (r=-0.42, p=0.02). Phase plot analysis may be a sensitive method of detecting gait changes in HD and can be performed quickly during clinical walking tests. Copyright © 2014 Elsevier B.V. All rights reserved.

40 CFR 62.7855 - New Mexico Environmental Improvement Board.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false New Mexico Environmental Improvement... Mexico Landfill Gas Emissions from Existing Municipal Solid Waste Landfills § 62.7855 New Mexico... as described in 40 CFR part 60, subpart Cc, under the jurisdiction of the New Mexico State...

40 CFR 62.7855 - New Mexico Environmental Improvement Board.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 9 2012-07-01 2012-07-01 false New Mexico Environmental Improvement... Mexico Landfill Gas Emissions from Existing Municipal Solid Waste Landfills § 62.7855 New Mexico... as described in 40 CFR part 60, subpart Cc, under the jurisdiction of the New Mexico State...

40 CFR 62.7855 - New Mexico Environmental Improvement Board.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 8 2011-07-01 2011-07-01 false New Mexico Environmental Improvement... Mexico Landfill Gas Emissions from Existing Municipal Solid Waste Landfills § 62.7855 New Mexico... as described in 40 CFR part 60, subpart Cc, under the jurisdiction of the New Mexico State...

40 CFR 62.7855 - New Mexico Environmental Improvement Board.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 9 2014-07-01 2014-07-01 false New Mexico Environmental Improvement... Mexico Landfill Gas Emissions from Existing Municipal Solid Waste Landfills § 62.7855 New Mexico... as described in 40 CFR part 60, subpart Cc, under the jurisdiction of the New Mexico State...

40 CFR 62.7855 - New Mexico Environmental Improvement Board.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 9 2013-07-01 2013-07-01 false New Mexico Environmental Improvement... Mexico Landfill Gas Emissions from Existing Municipal Solid Waste Landfills § 62.7855 New Mexico... as described in 40 CFR part 60, subpart Cc, under the jurisdiction of the New Mexico State...

Android and iPhone Apps for Viewing Browse Plots from the Magnetospheric Imaging Instrument (MIMI) on Cassin

NASA Astrophysics Data System (ADS)

Vandegriff, J. D.; Kusterer, M. B.; Byun, S.; Steele, R. J.; Mitchell, D. G.

2017-12-01

We present a new mobile app for Android and an existing app for iPhone, both capable of viewing the numerous browse plots available for data collected by the MIMI suite on NASA's Cassini spacecraft. Both apps allow convenient mobile access to pre-made plots of data from various instruments on the suite, including daily, and monthly plots of particle intensities (line plots and spectrograms) from LEMMS, CHEMS and INCA. Also, the apps can show short movies made from sequences of INCA neutral atom images. Browsing the plots or movies is as simple as swiping to the left or right, and the app hides all access details needed to finding the images. Note that the app requires a data connection, since it locates and downloads the plot files live from various instrument team servers. We will demonstrate the current versions of both apps, which are available in Apple's App Store and the Google Play Store.

Graphical Data Analysis on the Circle: Wrap-Around Time Series Plots for (Interrupted) Time Series Designs.

PubMed

Rodgers, Joseph Lee; Beasley, William Howard; Schuelke, Matthew

2014-01-01

Many data structures, particularly time series data, are naturally seasonal, cyclical, or otherwise circular. Past graphical methods for time series have focused on linear plots. In this article, we move graphical analysis onto the circle. We focus on 2 particular methods, one old and one new. Rose diagrams are circular histograms and can be produced in several different forms using the RRose software system. In addition, we propose, develop, illustrate, and provide software support for a new circular graphical method, called Wrap-Around Time Series Plots (WATS Plots), which is a graphical method useful to support time series analyses in general but in particular in relation to interrupted time series designs. We illustrate the use of WATS Plots with an interrupted time series design evaluating the effect of the Oklahoma City bombing on birthrates in Oklahoma County during the 10 years surrounding the bombing of the Murrah Building in Oklahoma City. We compare WATS Plots with linear time series representations and overlay them with smoothing and error bands. Each method is shown to have advantages in relation to the other; in our example, the WATS Plots more clearly show the existence and effect size of the fertility differential.

Design criteria and eigensequence plots for satellite-computed tomography. [in meteorology

NASA Technical Reports Server (NTRS)

Wahba, G.

1985-01-01

The use of the degrees of freedom for signal is proposed as a design criteria for comparing different designs for satellite and other measuring systems. It is also proposed that certain eigensequence plots be examined at the design stage along with appropriate estimates of the parameter lambda playing the role of noise to signal ratio. The degrees of freedom for signal and the eigensequence plots may be determined using prior information in the spectral domain which is presently available along with a description of the system, and simulated data for estimating lambda. This work extends the 1972 work of Weinreb and Crosby.

Longitudinal strain bull's eye plot patterns in patients with cardiomyopathy and concentric left ventricular hypertrophy.

PubMed

Liu, Dan; Hu, Kai; Nordbeck, Peter; Ertl, Georg; Störk, Stefan; Weidemann, Frank

2016-05-10

Despite substantial advances in the imaging techniques and pathophysiological understanding over the last decades, identification of the underlying causes of left ventricular hypertrophy by means of echocardiographic examination remains a challenge in current clinical practice. The longitudinal strain bull's eye plot derived from 2D speckle tracking imaging offers an intuitive visual overview of the global and regional left ventricular myocardial function in a single diagram. The bull's eye mapping is clinically feasible and the plot patterns could provide clues to the etiology of cardiomyopathies. The present review summarizes the longitudinal strain, bull's eye plot features in patients with various cardiomyopathies and concentric left ventricular hypertrophy and the bull's eye plot features might serve as one of the cardiac workup steps on evaluating patients with left ventricular hypertrophy.

DON'T BE TRICKED BY YOUR INTEGRATED RATE PLOT!

EPA Science Inventory

Reaction order can be determined from kinetic data in a variety of ways. Two methods commonly employed are comparison of initial rates (while varying reactant concentration) and plotting integrated rate expressions. Both of these are introduced in general and physical chemistry t...

[Eugenics, an element of the literary plots of dystopia].

PubMed

Baum, Ewa; Musielak, Michał

2007-01-01

The work presents the ideas and assumptions of eugenics, a social philosophy established in 1883 by Francis Galton, which affected the social policies of numerous European countries in the first half of the 20th century. The work shows the effect of eugenics on the literary standards of European prose in the previous century. Two outstanding dystopian novels of the 20th century, The Brave New World by Aldous Huxley and 1984 by George Orwell, situate eugenics as a permanent element of the literary plot of dystopia. Apart from the typical features of this type of novel, for example: personal narration with a trace of irony, a totalitarian state and Newspeak, eugenics is an important element of the literary plot with is aim to exclude and marginalise certain social groups. Eugenics is also one of the main social ideas criticised by both the writers.

Volcano plots in hydrogen electrocatalysis – uses and abuses

PubMed Central

Quaino, Paola; Juarez, Fernanda; Santos, Elizabeth

2014-01-01

Summary Sabatier’s principle suggests, that for hydrogen evolution a plot of the rate constant versus the hydrogen adsorption energy should result in a volcano, and several such plots have been presented in the literature. A thorough examination of the data shows, that there is no volcano once the oxide-covered metals are left out. We examine the factors that govern the reaction rate in the light of our own theory and conclude, that Sabatier’s principle is only one of several factors that determine the rate. With the exception of nickel and cobalt, the reaction rate does not decrease for highly exothermic hydrogen adsorption as predicted, because the reaction passes through more suitable intermediate states. The case of nickel is given special attention; since it is a 3d metal, its orbitals are compact and the overlap with hydrogen is too low to make it a good catalyst. PMID:24991521

Auger parameter and Wagner plot studies of small copper clusters

NASA Astrophysics Data System (ADS)

Moretti, Giuliano; Palma, Amedeo; Paparazzo, Ernesto; Satta, Mauro

2016-04-01

We discuss application of the Auger parameter and Wagner plot concepts to the study of small copper clusters deposited on various supports such as C(graphite), SiO2 and Al2O3. We demonstrate that the cluster size and the electronic properties of the support influence the shifts of both the binding energy of the Cu 2p3/2 transition and the kinetic energy of the Cu L3M45M45; 1G Auger transition. We find that the Cu L3M45M45; 1G-2p3/2 Auger parameter and Wagner plot allow one to single out and measure both initial- and final-state effects with a detail which is superior to that achieved in photoemission studies.

Transport of cyazofamid and kresoxim methyl in runoff at the plot and catchment scales

NASA Astrophysics Data System (ADS)

Lefrancq, Marie; Joaquín García Verdú, Antonio; Maillard, Elodie; Imfeld, Gwenaël; Payraudeau, Sylvain

2013-04-01

Surface runoff and erosion during the course of rainfall events represent major processes of pesticides transport from agricultural land to aquatic ecosystem. In general, field and catchment studies on pesticide transfer are carried out separately. A study at both scales may enable to improve the understanding of scale effects on processes involved in pesticides transport and to give clues on the source areas within an agricultural catchment. In this study, the transport in runoff of two widely used fungicides, i.e. kresoxim methyl (KM) and cyazofamid (CY) was assessed in a 43 ha vineyard catchment and the relative contribution of the total fungicides export from one representative plot was evaluated. During an entire period of fungicide application, from May to August 2011, the discharge and loads of dissolved and particle-laden KM and CY were monitored at the plot and catchment scales. The results showed larger export coefficient of KM and CY from catchment (0.064 and 0.041‰ for KM and CY respectively) than from the studied plot (0.009 and 0.023 ‰ for KM and CY respectively). It suggests that the plot margins especially the road network contributed as well to the fungicide loads. This result underlines the impact of fungicide drift on non-target areas. Furthermore, a larger rainfall threshold is necessary at the plot scale to trigger runoff and mobilise pesticides than on the road network. At the plot scale, a rapid dissipation of the both fungicides in the top soil was observed. It highlights that the risky period encompasses the first rainfall events triggering runoff after the applications. At both scales, KM and CY were not detected in suspended solids (i.e. > 0.7 µm). However their partitioning in runoff water differed. 64.1 and 91.8% of the KM load was detected in the dissolved phase (i.e. < 0.22 µm) at the plot and catchment scales respectively, whereas 98.7 and 100% of the CY load was detected in the particulate phase (i.e. between 0.22 and 0.7 µm

Markedly divergent estimates of Amazon forest carbon density from ground plots and satellites.

PubMed

Mitchard, Edward T A; Feldpausch, Ted R; Brienen, Roel J W; Lopez-Gonzalez, Gabriela; Monteagudo, Abel; Baker, Timothy R; Lewis, Simon L; Lloyd, Jon; Quesada, Carlos A; Gloor, Manuel; Ter Steege, Hans; Meir, Patrick; Alvarez, Esteban; Araujo-Murakami, Alejandro; Aragão, Luiz E O C; Arroyo, Luzmila; Aymard, Gerardo; Banki, Olaf; Bonal, Damien; Brown, Sandra; Brown, Foster I; Cerón, Carlos E; Chama Moscoso, Victor; Chave, Jerome; Comiskey, James A; Cornejo, Fernando; Corrales Medina, Massiel; Da Costa, Lola; Costa, Flavia R C; Di Fiore, Anthony; Domingues, Tomas F; Erwin, Terry L; Frederickson, Todd; Higuchi, Niro; Honorio Coronado, Euridice N; Killeen, Tim J; Laurance, William F; Levis, Carolina; Magnusson, William E; Marimon, Beatriz S; Marimon Junior, Ben Hur; Mendoza Polo, Irina; Mishra, Piyush; Nascimento, Marcelo T; Neill, David; Núñez Vargas, Mario P; Palacios, Walter A; Parada, Alexander; Pardo Molina, Guido; Peña-Claros, Marielos; Pitman, Nigel; Peres, Carlos A; Poorter, Lourens; Prieto, Adriana; Ramirez-Angulo, Hirma; Restrepo Correa, Zorayda; Roopsind, Anand; Roucoux, Katherine H; Rudas, Agustin; Salomão, Rafael P; Schietti, Juliana; Silveira, Marcos; de Souza, Priscila F; Steininger, Marc K; Stropp, Juliana; Terborgh, John; Thomas, Raquel; Toledo, Marisol; Torres-Lezama, Armando; van Andel, Tinde R; van der Heijden, Geertje M F; Vieira, Ima C G; Vieira, Simone; Vilanova-Torre, Emilio; Vos, Vincent A; Wang, Ophelia; Zartman, Charles E; Malhi, Yadvinder; Phillips, Oliver L

2014-08-01

The accurate mapping of forest carbon stocks is essential for understanding the global carbon cycle, for assessing emissions from deforestation, and for rational land-use planning. Remote sensing (RS) is currently the key tool for this purpose, but RS does not estimate vegetation biomass directly, and thus may miss significant spatial variations in forest structure. We test the stated accuracy of pantropical carbon maps using a large independent field dataset. Tropical forests of the Amazon basin. The permanent archive of the field plot data can be accessed at: http://dx.doi.org/10.5521/FORESTPLOTS.NET/2014_1. Two recent pantropical RS maps of vegetation carbon are compared to a unique ground-plot dataset, involving tree measurements in 413 large inventory plots located in nine countries. The RS maps were compared directly to field plots, and kriging of the field data was used to allow area-based comparisons. The two RS carbon maps fail to capture the main gradient in Amazon forest carbon detected using 413 ground plots, from the densely wooded tall forests of the north-east, to the light-wooded, shorter forests of the south-west. The differences between plots and RS maps far exceed the uncertainties given in these studies, with whole regions over- or under-estimated by > 25%, whereas regional uncertainties for the maps were reported to be < 5%. Pantropical biomass maps are widely used by governments and by projects aiming to reduce deforestation using carbon offsets, but may have significant regional biases. Carbon-mapping techniques must be revised to account for the known ecological variation in tree wood density and allometry to create maps suitable for carbon accounting. The use of single relationships between tree canopy height and above-ground biomass inevitably yields large, spatially correlated errors. This presents a significant challenge to both the forest conservation and remote sensing communities, because neither wood density nor species

Markedly divergent estimates of Amazon forest carbon density from ground plots and satellites

PubMed Central

Mitchard, Edward T A; Feldpausch, Ted R; Brienen, Roel J W; Lopez-Gonzalez, Gabriela; Monteagudo, Abel; Baker, Timothy R; Lewis, Simon L; Lloyd, Jon; Quesada, Carlos A; Gloor, Manuel; ter Steege, Hans; Meir, Patrick; Alvarez, Esteban; Araujo-Murakami, Alejandro; Aragão, Luiz E O C; Arroyo, Luzmila; Aymard, Gerardo; Banki, Olaf; Bonal, Damien; Brown, Sandra; Brown, Foster I; Cerón, Carlos E; Chama Moscoso, Victor; Chave, Jerome; Comiskey, James A; Cornejo, Fernando; Corrales Medina, Massiel; Da Costa, Lola; Costa, Flavia R C; Di Fiore, Anthony; Domingues, Tomas F; Erwin, Terry L; Frederickson, Todd; Higuchi, Niro; Honorio Coronado, Euridice N; Killeen, Tim J; Laurance, William F; Levis, Carolina; Magnusson, William E; Marimon, Beatriz S; Marimon Junior, Ben Hur; Mendoza Polo, Irina; Mishra, Piyush; Nascimento, Marcelo T; Neill, David; Núñez Vargas, Mario P; Palacios, Walter A; Parada, Alexander; Pardo Molina, Guido; Peña-Claros, Marielos; Pitman, Nigel; Peres, Carlos A; Poorter, Lourens; Prieto, Adriana; Ramirez-Angulo, Hirma; Restrepo Correa, Zorayda; Roopsind, Anand; Roucoux, Katherine H; Rudas, Agustin; Salomão, Rafael P; Schietti, Juliana; Silveira, Marcos; de Souza, Priscila F; Steininger, Marc K; Stropp, Juliana; Terborgh, John; Thomas, Raquel; Toledo, Marisol; Torres-Lezama, Armando; van Andel, Tinde R; van der Heijden, Geertje M F; Vieira, Ima C G; Vieira, Simone; Vilanova-Torre, Emilio; Vos, Vincent A; Wang, Ophelia; Zartman, Charles E; Malhi, Yadvinder; Phillips, Oliver L

2014-01-01

Aim The accurate mapping of forest carbon stocks is essential for understanding the global carbon cycle, for assessing emissions from deforestation, and for rational land-use planning. Remote sensing (RS) is currently the key tool for this purpose, but RS does not estimate vegetation biomass directly, and thus may miss significant spatial variations in forest structure. We test the stated accuracy of pantropical carbon maps using a large independent field dataset. Location Tropical forests of the Amazon basin. The permanent archive of the field plot data can be accessed at: http://dx.doi.org/10.5521/FORESTPLOTS.NET/2014_1 Methods Two recent pantropical RS maps of vegetation carbon are compared to a unique ground-plot dataset, involving tree measurements in 413 large inventory plots located in nine countries. The RS maps were compared directly to field plots, and kriging of the field data was used to allow area-based comparisons. Results The two RS carbon maps fail to capture the main gradient in Amazon forest carbon detected using 413 ground plots, from the densely wooded tall forests of the north-east, to the light-wooded, shorter forests of the south-west. The differences between plots and RS maps far exceed the uncertainties given in these studies, with whole regions over- or under-estimated by > 25%, whereas regional uncertainties for the maps were reported to be < 5%. Main conclusions Pantropical biomass maps are widely used by governments and by projects aiming to reduce deforestation using carbon offsets, but may have significant regional biases. Carbon-mapping techniques must be revised to account for the known ecological variation in tree wood density and allometry to create maps suitable for carbon accounting. The use of single relationships between tree canopy height and above-ground biomass inevitably yields large, spatially correlated errors. This presents a significant challenge to both the forest conservation and remote sensing communities

CPdock: the complementarity plot for docking of proteins: implementing multi-dielectric continuum electrostatics.

PubMed

Basu, Sankar

2017-12-07

The complementarity plot (CP) is an established validation tool for protein structures, applicable to both globular proteins (folding) as well as protein-protein complexes (binding). It computes the shape and electrostatic complementarities (S m , E m ) for amino acid side-chains buried within the protein interior or interface and plots them in a two-dimensional plot having knowledge-based probabilistic quality estimates for the residues as well as for the whole structure. The current report essentially presents an upgraded version of the plot with the implementation of the advanced multi-dielectric functionality (as in Delphi version 6.2 or higher) in the computation of electrostatic complementarity to make the validation tool physico-chemically more realistic. The two methods (single- and multi-dielectric) agree decently in their resultant E m values, and hence, provisions for both methods have been kept in the software suite. So to speak, the global electrostatic balance within a well-folded protein and/or a well-packed interface seems only marginally perturbed by the choice of different internal dielectric values. However, both from theoretical as well as practical grounds, the more advanced multi-dielectric version of the plot is certainly recommended for potentially producing more reliable results. The report also presents a new methodology and a variant plot, namely CP dock , based on the same principles of complementarity specifically designed to be used in the docking of proteins. The efficacy of the method to discriminate between good and bad docked protein complexes has been tested on a recent state-of-the-art docking benchmark. The results unambiguously indicate that CP dock can indeed be effective in the initial screening phase of a docking scoring pipeline before going into more sophisticated and computationally expensive scoring functions. CP dock has been made available at https://github.com/nemo8130/CPdock . Graphical Abstract An example showing

The Effect Direction Plot: Visual Display of Non-Standardised Effects across Multiple Outcome Domains

ERIC Educational Resources Information Center

Thomson, Hilary J.; Thomas, Sian

2013-01-01

Visual display of reported impacts is a valuable aid to both reviewers and readers of systematic reviews. Forest plots are routinely prepared to report standardised effect sizes, but where standardised effect sizes are not available for all included studies a forest plot may misrepresent the available evidence. Tabulated data summaries to…

IMS/Satellite Situation Center report. Predicted orbit plots for Hawkeye 1, 1976

NASA Technical Reports Server (NTRS)

1975-01-01

The predicted orbit plots are shown in three projections. The time period covered by each set of projections is 2 days 1 hour, corresponding approximately to the period of Hawkeye 1. The three coordinate systems used are the Geocentric Solar Ecliptic system (GSE), the Geocentric Solar Magnetospheric system (GSM), and the Solar Magnetic system (SM). For each of the three projections, time ticks and codes are given on the satellite trajectories. The codes are interpreted in the table at the base of each plot. Time is given in the table as year/day/decimal hour. The total time covered by each plot is shown at the bottom of each table, and an additional variable is given in the table for each time tick. For the GSM and SM projection this variable is the geocentric distance to the satellite in earth radii, and for the GSE projection the variable is satellite ecliptic latitude in degrees.

NASA Spacecraft Images New Mexico Wildfire

Atmospheric Science Data Center

2014-05-15

article title:  NASA Spacecraft Images New Mexico Wildfire     Left, ...   Lightning ignited the Silver Fire in western New Mexico on June 7, 2013. It has since consumed more than 137,000 acres of timber ...

The pros and cons of funnel plots as an aid to risk communication and patient decision making.

PubMed

Rakow, Tim; Wright, Rebecca J; Spiegelhalter, David J; Bull, Catherine

2015-05-01

Funnel plots, which simultaneously display a sample statistic and the corresponding sample size for multiple cases, have a range of applications. In medicine, they are used to display treatment outcome rates and caseload volume by institution, which can inform strategic decisions about health care delivery. We investigated lay people's understanding of such plots and explored their suitability as an aid to individual treatment decisions. In two studies, 172 participants answered objective questions about funnel plots representing the surgical outcomes (survival or mortality rates) of institutions varying in caseload, and indicated their preferred institutions. Accuracy for extracting objective information was high, unless question phrasing was inconsistent with the plot's survival/mortality framing, or participants had low numeracy levels. Participants integrated caseload-volume and outcome-rate data when forming preferences, but were influenced by reference lines on the plot to make inappropriate discriminations between institutions with similar outcome rates. With careful choice of accompanying language, funnel plots can be readily understood and are therefore a useful tool for communicating risk. However, they are less effective as a decision aid for individual patient's treatment decisions, and we recommend refinements to the standard presentation of the plots if they are to be used for that purpose. © 2014 The British Psychological Society.

Poincaré plot analysis of autocorrelation function of RR intervals in patients with acute myocardial infarction.

PubMed

Chuang, Shin-Shin; Wu, Kung-Tai; Lin, Chen-Yang; Lee, Steven; Chen, Gau-Yang; Kuo, Cheng-Deng

2014-08-01

The Poincaré plot of RR intervals (RRI) is obtained by plotting RRIn+1 against RRIn. The Pearson correlation coefficient (ρRRI), slope (SRRI), Y-intercept (YRRI), standard deviation of instantaneous beat-to-beat RRI variability (SD1RR), and standard deviation of continuous long-term RRI variability (SD2RR) can be defined to characterize the plot. Similarly, the Poincaré plot of autocorrelation function (ACF) of RRI can be obtained by plotting ACFk+1 against ACFk. The corresponding Pearson correlation coefficient (ρACF), slope (SACF), Y-intercept (YACF), SD1ACF, and SD2ACF can be defined similarly to characterize the plot. By comparing the indices of Poincaré plots of RRI and ACF between patients with acute myocardial infarction (AMI) and patients with patent coronary artery (PCA), we found that the ρACF and SACF were significantly larger, whereas the RMSSDACF/SDACF and SD1ACF/SD2ACF were significantly smaller in AMI patients. The ρACF and SACF correlated significantly and negatively with normalized high-frequency power (nHFP), and significantly and positively with normalized very low-frequency power (nVLFP) of heart rate variability in both groups of patients. On the contrary, the RMSSDACF/SDACF and SD1ACF/SD2ACF correlated significantly and positively with nHFP, and significantly and negatively with nVLFP and low-/high-frequency power ratio (LHR) in both groups of patients. We concluded that the ρACF, SACF, RMSSDACF/SDACF, and SD1ACF/SD2ACF, among many other indices of ACF Poincaré plot, can be used to differentiate between patients with AMI and patients with PCA, and that the increase in ρACF and SACF and the decrease in RMSSDACF/SDACF and SD1ACF/SD2ACF suggest an increased sympathetic and decreased vagal modulations in both groups of patients.

Analytical drafting curves provide exact equations for plotted data

NASA Technical Reports Server (NTRS)

Stewart, R. B.

1967-01-01

Analytical drafting curves provide explicit mathematical expressions for any numerical data that appears in the form of graphical plots. The curves each have a reference coordinate axis system indicated on the curve as well as the mathematical equation from which the curve was generated.

Seroprevalence of Toxoplasma gondii infection in captive mammals in three zoos in Mexico City, Mexico

USDA-ARS?s Scientific Manuscript database

Antibodies to Toxoplasma gondii were determined in 167 mammals in 3 zoos in Mexico City, Mexico using the modified agglutination test (MAT). Overall, antibodies to T. gondii were found in 89 (53.3%) of the 167 animals tested. Antibodies were found in 35 of 43 wild Felidae: 2 of 2 bobcats (Lynx rufus...

77 FR 41874 - New Mexico Disaster #NM-00025

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-16

... SMALL BUSINESS ADMINISTRATION [Disaster Declaration 13105 and 13106] New Mexico Disaster NM-00025... Administrative declaration of a disaster for the State of New Mexico dated 07/09/2012. Incident: Little Bear Fire... disaster: Primary Counties: Lincoln. Contiguous Counties: New Mexico: Chaves, De Baca, Guadalupe, Otero...

Forensic parameters and admixture in Mestizos from five geographic regions of Mexico based on 20 autosomal STRs (Powerplex 21 system).

PubMed

Aguilar-Velázquez, J A; Martínez-Cortés, G; Inclán-Sánchez, A; Favela-Mendoza, A F; Velarde-Félix, J S; Rangel-Villalobos, H

2018-03-01

We analyzed Mestizo (admixed) population samples from different geographic regions of Mexico (n = 1283) with 20 autosomal STRs (PowerPlex® 21, Promega Corp.). Allele frequencies and forensic parameters from the Northwest, Northeast, West, Center, and Southeast regions are reported, as well as from the pooled Mexican population sample. The combined PD and PE for this 20 STR system were > 0.9999999999 and > 0.99999996593% in all five population samples, respectively. Analysis of molecular variance (AMOVA) of these Mexican population samples, plus Monterrey (Northeast) and Mexico (Center) Cities, showed low but significant differences among Mexican-Mestizos from the seven populations (Fst = 0.20%; p = 0.0000). Structure analysis showed the highest proportion of Native American ancestry in Mexico City, Center, and Southeast regions, respectively, which was in agreement with the estimated genetic distances represented in a MDS plot and a NJ tree. The best fit of population clusters (K = 4) obtained with the Structure software indicates that Mexican-Mestizos are mainly composed by European, African, and two Native American ancestries. The European and Native American ancestries displayed a contrary gradient, increasing toward the North-West and South-Southeast, respectively. These 20 autosomal STR loci improved the admixture estimation regarding previous studies with the 13 CODIS-STRs, as supported by the higher similarity with previous estimates based on genome-wide SNP. In brief, this study validates the confident use of the PowerPlex® 21 system for human identification purposes in Mestizo populations throughout the Mexican territory.

Macroecology of Australian Tall Eucalypt Forests: Baseline Data from a Continental-Scale Permanent Plot Network

PubMed Central

Wood, Sam W.; Prior, Lynda D.; Stephens, Helen C.; Bowman, David M. J. S.

2015-01-01

Tracking the response of forest ecosystems to climate change demands large (≥1 ha) monitoring plots that are repeatedly measured over long time frames and arranged across macro-ecological gradients. Continental scale networks of permanent forest plots have identified links between climate and carbon fluxes by monitoring trends in tree growth, mortality and recruitment. The relationship between tree growth and climate in Australia has been recently articulated through analysis of data from smaller forest plots, but conclusions were limited by (a) absence of data on recruitment and mortality, (b) exclusion of non-eucalypt species, and (c) lack of knowledge of stand age or disturbance histories. To remedy these gaps we established the Ausplots Forest Monitoring Network: a continental scale network of 48 1 ha permanent plots in highly productive tall eucalypt forests in the mature growth stage. These plots are distributed across cool temperate, Mediterranean, subtropical and tropical climates (mean annual precipitation 850 to 1900 mm per year; mean annual temperature 6 to 21°C). Aboveground carbon stocks (AGC) in these forests are dominated by eucalypts (90% of AGC) whilst non-eucalypts in the understorey dominated species diversity and tree abundance (84% of species; 60% of stems). Aboveground carbon stocks were negatively related to mean annual temperature, with forests at the warm end of the temperature range storing approximately half the amount of carbon as forests at the cool end of the temperature range. This may reflect thermal constraints on tree growth detected through other plot networks and physiological studies. Through common protocols and careful sampling design, the Ausplots Forest Monitoring Network will facilitate the integration of tall eucalypt forests into established global forest monitoring initiatives. In the context of projections of rapidly warming and drying climates in Australia, this plot network will enable detection of links between

A randomized comparison between league tables and funnel plots to inform health care decision-making.

PubMed

Anell, Anders; Hagberg, Oskar; Liedberg, Fredrik; Ryden, Stefan

2016-12-01

Comparison of provider performance is commonly used to inform health care decision-making. Little attention has been paid to how data presentations influence decisions. This study analyzes differences in suggested actions by decision-makers informed by league tables or funnel plots. Decision-makers were invited to a survey and randomized to compare hospital performance using either league tables or funnel plots for four different measures within the area of cancer care. For each measure, decision-makers were asked to suggest actions towards 12-16 hospitals (no action, ask for more information, intervene) and provide feedback related to whether the information provided had been useful. Swedish health care. Two hundred and twenty-one decision-makers at administrative and clinical levels. Data presentations in the form of league tables or funnel plots. Number of actions suggested by participants. Proportion of appropriate actions. For all four measures, decision-makers tended to suggest more actions based on the information provided in league tables compared to funnel plots (44% vs. 21%, P < 0.001). Actions were on average more appropriate for funnel plots. However, when using funnel plots, decision-makers more often missed to react even when appropriate. The form of data presentation had an influence on decision-making. With league tables, decision-makers tended to suggest more actions compared to funnel plots. A difference in sensitivity and specificity conditioned by the form of presentation could also be identified, with different implications depending on the purpose of comparisons. Explanations and visualization aids are needed to support appropriate actions. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Analysis of a Split-Plot Experimental Design Applied to a Low-Speed Wind Tunnel Investigation

NASA Technical Reports Server (NTRS)

Erickson, Gary E.

2013-01-01

A procedure to analyze a split-plot experimental design featuring two input factors, two levels of randomization, and two error structures in a low-speed wind tunnel investigation of a small-scale model of a fighter airplane configuration is described in this report. Standard commercially-available statistical software was used to analyze the test results obtained in a randomization-restricted environment often encountered in wind tunnel testing. The input factors were differential horizontal stabilizer incidence and the angle of attack. The response variables were the aerodynamic coefficients of lift, drag, and pitching moment. Using split-plot terminology, the whole plot, or difficult-to-change, factor was the differential horizontal stabilizer incidence, and the subplot, or easy-to-change, factor was the angle of attack. The whole plot and subplot factors were both tested at three levels. Degrees of freedom for the whole plot error were provided by replication in the form of three blocks, or replicates, which were intended to simulate three consecutive days of wind tunnel facility operation. The analysis was conducted in three stages, which yielded the estimated mean squares, multiple regression function coefficients, and corresponding tests of significance for all individual terms at the whole plot and subplot levels for the three aerodynamic response variables. The estimated regression functions included main effects and two-factor interaction for the lift coefficient, main effects, two-factor interaction, and quadratic effects for the drag coefficient, and only main effects for the pitching moment coefficient.

A new graphic plot analysis for determination of neuroreceptor binding in positron emission tomography studies.

PubMed

Ito, Hiroshi; Yokoi, Takashi; Ikoma, Yoko; Shidahara, Miho; Seki, Chie; Naganawa, Mika; Takahashi, Hidehiko; Takano, Harumasa; Kimura, Yuichi; Ichise, Masanori; Suhara, Tetsuya

2010-01-01

In positron emission tomography (PET) studies with radioligands for neuroreceptors, tracer kinetics have been described by the standard two-tissue compartment model that includes the compartments of nondisplaceable binding and specific binding to receptors. In the present study, we have developed a new graphic plot analysis to determine the total distribution volume (V(T)) and nondisplaceable distribution volume (V(ND)) independently, and therefore the binding potential (BP(ND)). In this plot, Y(t) is the ratio of brain tissue activity to time-integrated arterial input function, and X(t) is the ratio of time-integrated brain tissue activity to time-integrated arterial input function. The x-intercept of linear regression of the plots for early phase represents V(ND), and the x-intercept of linear regression of the plots for delayed phase after the equilibrium time represents V(T). BP(ND) can be calculated by BP(ND)=V(T)/V(ND)-1. Dynamic PET scanning with measurement of arterial input function was performed on six healthy men after intravenous rapid bolus injection of [(11)C]FLB457. The plot yielded a curve in regions with specific binding while it yielded a straight line through all plot data in regions with no specific binding. V(ND), V(T), and BP(ND) values calculated by the present method were in good agreement with those by conventional non-linear least-squares fitting procedure. This method can be used to distinguish graphically whether the radioligand binding includes specific binding or not.

Analysis and Visualization of ChIP-Seq and RNA-Seq Sequence Alignments Using ngs.plot.

PubMed

Loh, Yong-Hwee Eddie; Shen, Li

2016-01-01

The continual maturation and increasing applications of next-generation sequencing technology in scientific research have yielded ever-increasing amounts of data that need to be effectively and efficiently analyzed and innovatively mined for new biological insights. We have developed ngs.plot-a quick and easy-to-use bioinformatics tool that performs visualizations of the spatial relationships between sequencing alignment enrichment and specific genomic features or regions. More importantly, ngs.plot is customizable beyond the use of standard genomic feature databases to allow the analysis and visualization of user-specified regions of interest generated by the user's own hypotheses. In this protocol, we demonstrate and explain the use of ngs.plot using command line executions, as well as a web-based workflow on the Galaxy framework. We replicate the underlying commands used in the analysis of a true biological dataset that we had reported and published earlier and demonstrate how ngs.plot can easily generate publication-ready figures. With ngs.plot, users would be able to efficiently and innovatively mine their own datasets without having to be involved in the technical aspects of sequence coverage calculations and genomic databases.

Strong motion seismology in Mexico

NASA Astrophysics Data System (ADS)

Singh, S. K.; Ordaz, M.

1993-02-01

Since 1985, digital accelerographs have been installed along a 500 km segment above the Mexican subduction zone, at some inland sites which form an attenuation line between the Guerrero seismic gap and Mexico City, and in the Valley of Mexico. These networks have recorded a few large earthquakes and many moderate and small earthquakes. Analysis of the data has permitted a significant advance in the understanding of source characteristics, wave propagation and attenuation, and site effects. This, in turn, has permitted reliable estimations of ground motions from future earthquakes. This paper presents a brief summary of some important results which are having a direct bearing on current earthquake engineering practice in Mexico.

Runoff and soil erosion plot-scale studies under natural rainfall: A meta-analysis of the Brazilian experience

USDA-ARS?s Scientific Manuscript database

Research to measure soil erosion rates in the United States from natural rainfall runoff plots began in the early 1900’s. In Brazil, the first experimental study at the plot-scale was conducted in the 1940’s; however, the monitoring process and the creation of new experimental field plots have not c...

New Mexico Higher Education Department Annual Report, 2016

ERIC Educational Resources Information Center

New Mexico Higher Education Department, 2016

2016-01-01

The New Mexico Higher Education Department strives to bring leadership, guidance, and assistance to New Mexico's higher education stakeholders. The HED is committed to promoting best practices, institutional fiscal responsibility, and student achievement. Everything the agency does is through the lens of supporting New Mexico's higher education…