Engineering analysis of shortfall for new technologies. Analysis memorandum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-03-11

The engineering principles that govern the mpg performance of alternative technologies on the EPA test procedure and under in-use conditions are examined. The results can be used to interpret the shortfall of alternative technologies derived from statistical analyses. The analysis examines each of the four technologies in comparison to the conventional technology counterpart. Manual transmissions are compared to automatics, fuel injected S.I. engines to carburetted S.I. engines, front-wheel drive vehicles to rear-wheel drive vehicles and diesel engines to carburetted S.I. engines. The changes in shortfall of the four technologies in comparison to conventional technologies are explained through differences in responsesmore » to the factors.« less

Cost/benefit analysis of advanced materials technology candidates for the 1980's, part 2

NASA Technical Reports Server (NTRS)

Dennis, R. E.; Maertins, H. F.

1980-01-01

Cost/benefit analyses to evaluate advanced material technologies projects considered for general aviation and turboprop commuter aircraft through estimated life-cycle costs, direct operating costs, and development costs are discussed. Specifically addressed is the selection of technologies to be evaluated; development of property goals; assessment of candidate technologies on typical engines and aircraft; sensitivity analysis of the changes in property goals on performance and economics, cost, and risk analysis for each technology; and ranking of each technology by relative value. The cost/benefit analysis was applied to a domestic, nonrevenue producing, business-type jet aircraft configured with two TFE731-3 turbofan engines, and to a domestic, nonrevenue producing, business type turboprop aircraft configured with two TPE331-10 turboprop engines. In addition, a cost/benefit analysis was applied to a commercial turboprop aircraft configured with a growth version of the TPE331-10.

SILICATE TECHNOLOGY CORPORATION'S SOLIDIFICATION/ STABILIZATION TECHNOLOGY FOR ORGANIC AND INORGANIC CONTAMINANTS IN SOILS - APPLICATIONS ANALYSIS REPORT

EPA Science Inventory

This Applications Analysis Report evaluates the solidification/stabilization treatment process of Silicate Technology Corporation (STC) for the on-site treatment of hazardous waste. The STC immobilization technology utilizes a proprietary product (FMS Silicate) to chemically stab...

76 FR 68189 - Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... FEDERAL TRADE COMMISSION [File No. 111 0097] Healthcare Technology Holdings, Inc.; Analysis of... Public Comment I. Introduction The Federal Trade Commission (``Commission'') has accepted from Healthcare Technology Holdings, Inc. (``Healthcare Technology''), subject to final approval, an Agreement Containing...

The application of decision analysis to life support research and technology development

NASA Technical Reports Server (NTRS)

Ballin, Mark G.

1994-01-01

Applied research and technology development is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Decision making regarding which technologies to advance and what resources to devote to them is a challenging but essential task. In the application of life support technology to future manned space flight, new technology concepts typically are characterized by nonexistent data and rough approximations of technology performance, uncertain future flight program needs, and a complex, time-intensive process to develop technology to a flight-ready status. Decision analysis is a quantitative, logic-based discipline that imposes formalism and structure to complex problems. It also accounts for the limits of knowledge that may be available at the time a decision is needed. The utility of decision analysis to life support technology R & D was evaluated by applying it to two case studies. The methodology was found to provide insight that is not possible from more traditional analysis approaches.

Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

NASA Technical Reports Server (NTRS)

ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

[THE TECHNOLOGY "CELL BLOCK" IN CYTOLOGICAL PRACTICE].

PubMed

Volchenko, N N; Borisova, O V; Baranova, I B

2015-08-01

The article presents summary information concerning application of "cell block" technology in cytological practice. The possibilities of implementation of various modern techniques (immune cytochemnical analysis. FISH, CISH, polymerase chain reaction) with application of "cell block" method are demonstrated. The original results of study of "cell block" technology made with gelatin, AgarCyto and Shadon Cyoblock set are presented. The diagnostic effectiveness of "cell block" technology and common cytological smear and also immune cytochemical analysis on samples of "cell block" technology and fluid cytology were compared. Actually application of "cell block" technology is necessary for ensuring preservation of cell elements for subsequent immune cytochemical and molecular genetic analysis.

Determining Trends and Issues in Educational Technology through Content Analysis.

ERIC Educational Resources Information Center

Ely, Donald P.; And Others

A content analysis was performed to determine the trends and issues in educational technology for the period from October 1, 1987 through September 30, 1988. Sources for the analysis included five leading professional journals in educational technology, papers given at annual conventions of three professional associations, dissertations from five…

ECONOMIC AND ENVIRONMENTAL ANALYSIS OF TECHNOLOGIES TO TREAT MERCURY AND DISPOSE IN A WASTE CONTAINMENT FACILITY

EPA Science Inventory

This report is intended to describe an economic and environmental analysis of a number of technologies for the treatment and disposal of elemental mercury. The analysis considers three treatment technologies that convert elemental mercury into a stable form of mercury. The techno...

A network meta-analysis on the effects of information technology application on preoperative knowledge of patients.

PubMed

Lai, Yi-Horng

2015-01-01

The application of information technology in health education plan in Taiwan has existed for a long time. The purpose of this study is to explore the relationship between information technology application in health education and patients' preoperative knowledge by synthesizing existing researches that compare the effectiveness of information technology application and traditional instruction in the health education plan. In spite of claims regarding the potential benefits of using information technology in health education plan, results of previous researches were conflicting. This study is carried out to examine the effectiveness of information technology by using network meta-analysis, which is a statistical analysis of separate but similar studies in order to test the pooled data for statistical significance. Information technology application in health education discussed in this study include interactive technology therapy (person-computer), group interactive technology therapy (person-person), multimedia technology therapy and video therapy. The result has shown that group interactive technology therapy is the most effective, followed by interactive technology therapy. And these four therapies of information technology are all superior to the traditional health education plan (leaflet therapy).

Matching Jobs, People, and Instructional Content: An Innovative Application of a Latent Semantic Analysis-Based Technology

DTIC Science & Technology

2003-03-01

information technologies that can: (a) represent knowledge and skills, (b) identify people with all or parts of the knowledge and task experience...needed but lacked, A might be at too advanced a level for the 8 individual to understand given his or her previous knowledge , B might overlap too...SEMANTIC ANALYSIS-BASED TECHNOLOGY Darrell Laham Knowledge Analysis Technologies 4940 Pearl East Circle #200 Boulder, CO 80301 Winston

Text mining factor analysis (TFA) in green tea patent data

NASA Astrophysics Data System (ADS)

Rahmawati, Sela; Suprijadi, Jadi; Zulhanif

2017-03-01

Factor analysis has become one of the most widely used multivariate statistical procedures in applied research endeavors across a multitude of domains. There are two main types of analyses based on factor analysis: Exploratory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA). Both EFA and CFA aim to observed relationships among a group of indicators with a latent variable, but they differ fundamentally, a priori and restrictions made to the factor model. This method will be applied to patent data technology sector green tea to determine the development technology of green tea in the world. Patent analysis is useful in identifying the future technological trends in a specific field of technology. Database patent are obtained from agency European Patent Organization (EPO). In this paper, CFA model will be applied to the nominal data, which obtain from the presence absence matrix. While doing processing, analysis CFA for nominal data analysis was based on Tetrachoric matrix. Meanwhile, EFA model will be applied on a title from sector technology dominant. Title will be pre-processing first using text mining analysis.

Knowledge Consolidation Analysis: Toward a Methodology for Studying the Role of Argument in Technology Development

ERIC Educational Resources Information Center

Dyehouse, Jeremiah

2007-01-01

Researchers studying technology development often examine how rhetorical activity contributes to technologies' design, implementation, and stabilization. This article offers a possible methodology for studying one role of rhetorical activity in technology development: knowledge consolidation analysis. Applying this method to an exemplar case, the…

Treating technology as a luxury? 10 necessary tools.

PubMed

Berger, Steven H

2007-02-01

Technology and techniques that every hospital should acquire and use for effective financial management include: Daily dashboards. Balanced scorecards. Benchmarking. Flexible budgeting and monitoring. Labor management systems. Nonlabor management analysis. Service, line, physician, and patient-level reporting and analysis. Cost accounting technology. Contract management technology. Denials management software.

The Relative Efficiencies of Research Universities of Science and Technology in China: Based on the Data Envelopment Analysis and Stochastic Frontier Analysis

ERIC Educational Resources Information Center

Chuanyi, Wang; Xiaohong, Lv; Shikui, Zhao

2016-01-01

This paper applies data envelopment analysis (DEA) and stochastic frontier analysis (SFA) to explore the relative efficiency of China's research universities of science and technology. According to the finding, when talent training is the only output, the efficiency of research universities of science and technology is far lower than that of…

Methods of Technological Forecasting,

DTIC Science & Technology

1977-05-01

Trend Extrapolation Progress Curve Analogy Trend Correlation Substitution Analysis or Substitution Growth Curves Envelope Curve Advances in the State of...the Art Technological Mapping Contextual Mapping Matrix Input-Output Analysis Mathematical Models Simulation Models Dynamic Modelling. CHAPTER IV...Generation Interaction between Needs and Possibilities Map of the Technological Future — (‘ross- Impact Matri x Discovery Matrix Morphological Analysis

Fuel Cell Technology Status Analysis Project: Partnership Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fact sheet describing the National Renewable Energy Laboratory's (NREL's) Fuel Cell Technology Status Analysis Project. NREL is seeking fuel cell industry partners from the United States and abroad to participate in an objective and credible analysis of commercially available fuel cell products to benchmark the current state of the technology and support industry growth.

Usage of information safety requirements in improving tube bending process

NASA Astrophysics Data System (ADS)

Livshitz, I. I.; Kunakov, E.; Lontsikh, P. A.

2018-05-01

This article is devoted to an improvement of the technological process's analysis with the information security requirements implementation. The aim of this research is the competition increase analysis in aircraft industry enterprises due to the information technology implementation by the example of the tube bending technological process. The article analyzes tube bending kinds and current technique. In addition, a potential risks analysis in a tube bending technological process is carried out in terms of information security.

Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

NASA Technical Reports Server (NTRS)

Doyle, Monica; ONeil, Daniel A.; Christensen, Carissa B.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS) is a decision support tool designed to aid program managers and strategic planners in determining how to invest technology research and development dollars. It is an Excel-based modeling package that allows a user to build complex space architectures and evaluate the impact of various technology choices. ATLAS contains system models, cost and operations models, a campaign timeline and a centralized technology database. Technology data for all system models is drawn from a common database, the ATLAS Technology Tool Box (TTB). The TTB provides a comprehensive, architecture-independent technology database that is keyed to current and future timeframes.

System-of-Systems Technology-Portfolio-Analysis Tool

NASA Technical Reports Server (NTRS)

O'Neil, Daniel; Mankins, John; Feingold, Harvey; Johnson, Wayne

2012-01-01

Advanced Technology Life-cycle Analysis System (ATLAS) is a system-of-systems technology-portfolio-analysis software tool. ATLAS affords capabilities to (1) compare estimates of the mass and cost of an engineering system based on competing technological concepts; (2) estimate life-cycle costs of an outer-space-exploration architecture for a specified technology portfolio; (3) collect data on state-of-the-art and forecasted technology performance, and on operations and programs; and (4) calculate an index of the relative programmatic value of a technology portfolio. ATLAS facilitates analysis by providing a library of analytical spreadsheet models for a variety of systems. A single analyst can assemble a representation of a system of systems from the models and build a technology portfolio. Each system model estimates mass, and life-cycle costs are estimated by a common set of cost models. Other components of ATLAS include graphical-user-interface (GUI) software, algorithms for calculating the aforementioned index, a technology database, a report generator, and a form generator for creating the GUI for the system models. At the time of this reporting, ATLAS is a prototype, embodied in Microsoft Excel and several thousand lines of Visual Basic for Applications that run on both Windows and Macintosh computers.

How do we evaluate the cost of healthcare technology?

NASA Astrophysics Data System (ADS)

Nobel, Joel J.

1994-12-01

Five critical questions apply when evaluating the cost of healthcare technology: Who is asking the question (of how to evaluate healthcare costs)? For what purpose? What is the nature of the decision that must be made? At what state of a technology's development and diffusion are the questions being posed? What type of technology is stimulating the questions? A large number of organizations, both national and international, are engaged in technology assessment, and constructive disagreement improves the overall quality of those assessments. Current cost measurements tools such as cost-utility analysis, cost-benefit analysis, cost- effectiveness analysis, and outcomes research are weak and ineffective. Recently, pharmaceutical manufacturers have adopted more global cost-effectiveness studies. Technology assessments will ultimately focus on examining the relative cost-effectiveness of alternative technologies for a specific pathology or examining the relative cost-effectiveness of alternative technologies for a specific pathology or DRG. In addition to the traditional healthcare facility--hospital, outpatient facility, or group practice, group purchasing organizations are also asking about cost-effectiveness of healthcare. ECRI's SELECTTM process, unlike less effective technology assessments, takes into account real-world user experience data and life-cycle cost analysis in addition to detailed comparisons of technical features and performance.

"There's Not Enough Knowledge Out There": Examining Older Adults' Perceptions of Digital Technology Use and Digital Inclusion Classes.

PubMed

Betts, Lucy R; Hill, Rowena; Gardner, Sarah E

2017-10-01

Older adults' definitions of digital technology, and experiences of digital inclusion sessions, were examined using qualitative approaches. Seventeen older adults (aged between 54 and 85 years) participated in two focus groups that each lasted approximately 90 min to explore how older adults understood technology within their lived experience. Interpretative phenomenological analysis yielded two main themes: thirst for knowledge and a wish list for digital technology sessions. A separate content analysis was performed to identify what technology older adults identified as digital technology. This analysis revealed that the older adults most frequently defined digital technology as computers and telephones. The findings support the conclusions that this group of older adults, some of whom were "successful users," have a wide knowledge of digital technology, are interested in gaining more skills, and desire knowledge acquisition through personalized one-to-one learning sessions.

Ares Project Technology Assessment: Approach and Tools

NASA Technical Reports Server (NTRS)

Hueter, Uwe; Tyson, Richard

2010-01-01

Technology assessments provide a status of the development maturity of specific technologies. Along with benefit analysis, the risks the project assumes can be quantified. Normally due to budget constraints, the competing technologies are prioritized and decisions are made which ones to fund. A detailed technology development plan is produced for the selected technologies to provide a roadmap to reach the desired maturity by the project s critical design review. Technology assessments can be conducted for both technology only tasks or for product development programs. This paper is primarily biased toward the product development programs. The paper discusses the Ares Project s approach to technology assessment. System benefit analysis, risk assessment, technology prioritization, and technology readiness assessment are addressed. A description of the technology readiness level tool being used is provided.

Assessment of Technologies for the Space Shuttle External Tank Thermal Protection System and Recommendations for Technology Improvement. Part 2; Structural Analysis Technologies and Modeling Practices

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Nemeth, Michael P.; Hilburger, Mark W.

2004-01-01

A technology review and assessment of modeling and analysis efforts underway in support of a safe return to flight of the thermal protection system (TPS) for the Space Shuttle external tank (ET) are summarized. This review and assessment effort focuses on the structural modeling and analysis practices employed for ET TPS foam design and analysis and on identifying analysis capabilities needed in the short-term and long-term. The current understanding of the relationship between complex flight environments and ET TPS foam failure modes are reviewed as they relate to modeling and analysis. A literature review on modeling and analysis of TPS foam material systems is also presented. Finally, a review of modeling and analysis tools employed in the Space Shuttle Program is presented for the ET TPS acreage and close-out foam regions. This review includes existing simplified engineering analysis tools are well as finite element analysis procedures.

An Analysis of the Federal Role in Instructional Technology in the Era of the New Federalism.

ERIC Educational Resources Information Center

Scandura, Joseph M.

This analysis of how the federal government might best promote excellence in education via instructional technology identifies strengths and weaknesses of instructional technology during the 1980's, indicates how technology might aid the teaching and learning process, and suggests how the federal goverment might best assist states and localities…

Explaining Technology Integration in K-12 Classrooms: A Multilevel Path Analysis Model

ERIC Educational Resources Information Center

Liu, Feng; Ritzhaupt, Albert D.; Dawson, Kara; Barron, Ann E.

2017-01-01

The purpose of this research was to design and test a model of classroom technology integration in the context of K-12 schools. The proposed multilevel path analysis model includes teacher, contextual, and school related variables on a teacher's use of technology and confidence and comfort using technology as mediators of classroom technology…

Environmental life cycle assessment of methanol and electricity co-production system based on coal gasification technology.

PubMed

Śliwińska, Anna; Burchart-Korol, Dorota; Smoliński, Adam

2017-01-01

This paper presents a life cycle assessment (LCA) of greenhouse gas emissions generated through methanol and electricity co-production system based on coal gasification technology. The analysis focuses on polygeneration technologies from which two products are produced, and thus, issues related to an allocation procedure for LCA are addressed in this paper. In the LCA, two methods were used: a 'system expansion' method based on two approaches, the 'avoided burdens approach' and 'direct system enlargement' methods and an 'allocation' method involving proportional partitioning based on physical relationships in a technological process. Cause-effect relationships in the analysed production process were identified, allowing for the identification of allocation factors. The 'system expansion' method involved expanding the analysis to include five additional variants of electricity production technologies in Poland (alternative technologies). This method revealed environmental consequences of implementation for the analysed technologies. It was found that the LCA of polygeneration technologies based on the 'system expansion' method generated a more complete source of information on environmental consequences than the 'allocation' method. The analysis shows that alternative technologies chosen for generating LCA results are crucial. Life cycle assessment was performed for the analysed, reference and variant alternative technologies. Comparative analysis was performed between the analysed technologies of methanol and electricity co-production from coal gasification as well as a reference technology of methanol production from the natural gas reforming process. Copyright © 2016 Elsevier B.V. All rights reserved.

The challenge of technology transfer: Buying in without selling out

PubMed Central

Pennypacker, H. S.

1986-01-01

Highly effective technologies flowing from the discipline of behavior analysis have not been widely adopted, thus threatening the survival of the discipline itself. An analysis of the contingencies underlying successful technology transfer suggests the need for direct, empirical involvement in the marketplace in order to insure that the maximum demonstrable benefits reach the ultimate users. A successful example of this strategy of technology transfer is provided. Three areas of intense national concern—urban violence, illiteracy, and declining industrial productivity—provide immediate opportunities for the technologies of behavior analysis to secure the place of the discipline in the intellectual mosaic of the 21st century. PMID:22478656

Patent Network Analysis and Quadratic Assignment Procedures to Identify the Convergence of Robot Technologies

PubMed Central

Lee, Woo Jin; Lee, Won Kyung

2016-01-01

Because of the remarkable developments in robotics in recent years, technological convergence has been active in this area. We focused on finding patterns of convergence within robot technology using network analysis of patents in both the USPTO and KIPO. To identify the variables that affect convergence, we used quadratic assignment procedures (QAP). From our analysis, we observed the patent network ecology related to convergence and found technologies that have great potential to converge with other robotics technologies. The results of our study are expected to contribute to setting up convergence based R&D policies for robotics, which can lead new innovation. PMID:27764196

Application of Interface Technology in Progressive Failure Analysis of Composite Panels

NASA Technical Reports Server (NTRS)

Sleight, D. W.; Lotts, C. G.

2002-01-01

A progressive failure analysis capability using interface technology is presented. The capability has been implemented in the COMET-AR finite element analysis code developed at the NASA Langley Research Center and is demonstrated on composite panels. The composite panels are analyzed for damage initiation and propagation from initial loading to final failure using a progressive failure analysis capability that includes both geometric and material nonlinearities. Progressive failure analyses are performed on conventional models and interface technology models of the composite panels. Analytical results and the computational effort of the analyses are compared for the conventional models and interface technology models. The analytical results predicted with the interface technology models are in good correlation with the analytical results using the conventional models, while significantly reducing the computational effort.

Comparative analysis of the application of different Low Power Wide Area Network technologies in power grid

NASA Astrophysics Data System (ADS)

Wang, Hao; Sui, Hong; Liao, Xing; Li, Junhao

2018-03-01

Low Power Wide Area Network (LPWAN) technologies developed rapidly in recent years, but the application principle of different LPWAN technologies in power grid is still not clear. This paper gives a comparative analysis of two mainstream LPWAN technologies including NB-IoT and LoRa, and gives an application suggestion of these two LPWAN technologies, which can guide the planning and construction of LPWAN in power grid.

Applying Technology Ranking and Systems Engineering in Advanced Life Support

NASA Technical Reports Server (NTRS)

Jones, Harry; Luna, Bernadette (Technical Monitor)

2000-01-01

According to the Advanced Life Support (ALS) Program Plan, the Systems Modeling and Analysis Project (SMAP) has two important tasks: 1) prioritizing investments in ALS Research and Technology Development (R&TD), and 2) guiding the evolution of ALS systems. Investments could be prioritized simply by independently ranking different technologies, but we should also consider a technology's impact on system design. Guiding future ALS systems will require SMAP to consider many aspects of systems engineering. R&TD investments can be prioritized using familiar methods for ranking technology. The first step is gathering data on technology performance, safety, readiness level, and cost. Then the technologies are ranked using metrics or by decision analysis using net present economic value. The R&TD portfolio can be optimized to provide the maximum expected payoff in the face of uncertain future events. But more is needed. The optimum ALS system can not be designed simply by selecting the best technology for each predefined subsystem. Incorporating a new technology, such as food plants, can change the specifications of other subsystems, such as air regeneration. Systems must be designed top-down starting from system objectives, not bottom-up from selected technologies. The familiar top-down systems engineering process includes defining mission objectives, mission design, system specification, technology analysis, preliminary design, and detail design. Technology selection is only one part of systems analysis and engineering, and it is strongly related to the subsystem definitions. ALS systems should be designed using top-down systems engineering. R&TD technology selection should consider how the technology affects ALS system design. Technology ranking is useful but it is only a small part of systems engineering.

Space science technology: In-situ science. Sample Acquisition, Analysis, and Preservation Project summary

NASA Technical Reports Server (NTRS)

Aaron, Kim

1991-01-01

The Sample Acquisition, Analysis, and Preservation Project is summarized in outline and graphic form. The objective of the project is to develop component and system level technology to enable the unmanned collection, analysis and preservation of physical, chemical and mineralogical data from the surface of planetary bodies. Technology needs and challenges are identified and specific objectives are described.

Nuclear Proliferation: A Historical Overview

DTIC Science & Technology

2008-03-01

Talbert, “Nuclear Proliferation Technology Trends Analysis ,” Pacific Northwest National Laboratory, PNNL -14480 (September 2005), p. 92. 1973: Closed...L. Coles, and R. J. Talbert, “Nuclear Proliferation Technology Trends Analysis ,” Pacific Northwest National Laboratory, PNNL -14480 (September 2005...D. Zentner, G. L. Coles, and R. J. Talbert, “Nuclear Proliferation Technology Trends Analysis ,” Pacific Northwest National Laboratory, PNNL -14480

Naturally-Emerging Technology-Based Leadership Roles in Three Independent Schools: A Social Network-Based Case Study Using Fuzzy Set Qualitative Comparative Analysis

ERIC Educational Resources Information Center

Velastegui, Pamela J.

2013-01-01

This hypothesis-generating case study investigates the naturally emerging roles of technology brokers and technology leaders in three independent schools in New York involving 92 school educators. A multiple and mixed method design utilizing Social Network Analysis (SNA) and fuzzy set Qualitative Comparative Analysis (FSQCA) involved gathering…

Geospatial Data Science Analysis | Geospatial Data Science | NREL

Science.gov Websites

different levels of technology maturity. Photo of a man taking field measurements. Geospatial analysis energy for different technologies across the nation? Featured Analysis Products Renewable Energy

Technology Systems Analysis | Energy Analysis | NREL

Science.gov Websites

RD&D areas in terms of potential costs, benefits, risks, uncertainties, and timeframes. For examples of our technology systems analysis work, see these research areas: Bioenergy Buildings Grid

VENTILATION TECHNOLOGY SYSTEMS ANALYSIS

EPA Science Inventory

The report gives results of a project to develop a systems analysis of ventilation technology and provide a state-of-the-art assessment of ventilation and indoor air quality (IAQ) research needs. (NOTE: Ventilation technology is defined as the hardware necessary to bring outdoor ...

Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Hanks, G. W.; Shomber, H. A.; Dethman, H. A.; Gratzer, L. B.; Maeshiro, A.; Gangsaas, D.; Blight, J. D.; Buchan, S. M.; Crumb, C. B.; Dorwart, R. J.

1981-01-01

The current status of the Active Controls Technology (ACT) for the advanced subsonic transport project is investigated through analysis of the systems technical data. Control systems technologies under examination include computerized reliability analysis, pitch axis fly by wire actuator, flaperon actuation system design trade study, control law synthesis and analysis, flutter mode control and gust load alleviation analysis, and implementation of alternative ACT systems. Extensive analysis of the computer techniques involved in each system is included.

Cost-effectiveness analysis and innovation.

PubMed

Jena, Anupam B; Philipson, Tomas J

2008-09-01

While cost-effectiveness (CE) analysis has provided a guide to allocating often scarce resources spent on medical technologies, less emphasis has been placed on the effect of such criteria on the behavior of innovators who make health care technologies available in the first place. A better understanding of the link between innovation and cost-effectiveness analysis is particularly important given the large role of technological change in the growth in health care spending and the growing interest of explicit use of CE thresholds in leading technology adoption in several Westernized countries. We analyze CE analysis in a standard market context, and stress that a technology's cost-effectiveness is closely related to the consumer surplus it generates. Improved CE therefore often clashes with interventions to stimulate producer surplus, such as patents. We derive the inconsistency between technology adoption based on CE analysis and economic efficiency. Indeed, static efficiency, dynamic efficiency, and improved patient health may all be induced by the cost-effectiveness of the technology being at its worst level. As producer appropriation of the social surplus of an innovation is central to the dynamic efficiency that should guide CE adoption criteria, we exemplify how appropriation can be inferred from existing CE estimates. For an illustrative sample of technologies considered, we find that the median technology has an appropriation of about 15%. To the extent that such incentives are deemed either too low or too high compared to dynamically efficient levels, CE thresholds may be appropriately raised or lowered to improve dynamic efficiency.

Technology assessment of solar energy utilization

NASA Astrophysics Data System (ADS)

Jaeger, F.

1985-11-01

The general objectives and methods of Technology Assessment (TA) are outlined. Typical analysis steps of a TA for solar energy are reviewed: description of the technology and its further development; identification of impact areas; analysis of boundary conditions and definition of scenarios; market penetration of solar technologies; projection of consequences in areas of impact; and assessment of impacts and identification of options for action.

Voice stress analysis and evaluation

NASA Astrophysics Data System (ADS)

Haddad, Darren M.; Ratley, Roy J.

2001-02-01

Voice Stress Analysis (VSA) systems are marketed as computer-based systems capable of measuring stress in a person's voice as an indicator of deception. They are advertised as being less expensive, easier to use, less invasive in use, and less constrained in their operation then polygraph technology. The National Institute of Justice have asked the Air Force Research Laboratory for assistance in evaluating voice stress analysis technology. Law enforcement officials have also been asking questions about this technology. If VSA technology proves to be effective, its value for military and law enforcement application is tremendous.

Analysis of Information Contained in Completed North American Innovative Remediation Technology Demonstration Projects

EPA Pesticide Factsheets

This report prepared by the Groundwater Remediation Technologies Analysis Center (GWRTAC) provides an analysis of information pertaining to ground-water remediation projects contained in the title document.

The Evolution of U.S. e-Learning Policy: A Content Analysis of the National Education Technology Plans

ERIC Educational Resources Information Center

Roumell, Elizabeth Anne; Salajan, Florin Daniel

2016-01-01

The purpose of this study was threefold: to expand on existing reviews of 20 years of educational technology policy in the United States, to perform an empirical content analysis of the four National Education Technology Plan (NETP) documents issued by the Department of Education since 1996, and to provide a dialectic analysis of the evolution of…

The change in critical technologies for computational physics

NASA Technical Reports Server (NTRS)

Watson, Val

1990-01-01

It is noted that the types of technology required for computational physics are changing as the field matures. Emphasis has shifted from computer technology to algorithm technology and, finally, to visual analysis technology as areas of critical research for this field. High-performance graphical workstations tied to a supercommunicator with high-speed communications along with the development of especially tailored visualization software has enabled analysis of highly complex fluid-dynamics simulations. Particular reference is made here to the development of visual analysis tools at NASA's Numerical Aerodynamics Simulation Facility. The next technology which this field requires is one that would eliminate visual clutter by extracting key features of simulations of physics and technology in order to create displays that clearly portray these key features. Research in the tuning of visual displays to human cognitive abilities is proposed. The immediate transfer of technology to all levels of computers, specifically the inclusion of visualization primitives in basic software developments for all work stations and PCs, is recommended.

[Research advances in water quality monitoring technology based on UV-Vis spectrum analysis].

PubMed

Wei, Kang-Lin; Wen, Zhi-yu; Wu, Xin; Zhang, Zhong-Wei; Zeng, Tian-Ling

2011-04-01

The application of spectral analysis to water quality monitoring is an important developing trend in the field of modern environment monitoring technology. The principle and characteristic of water quality monitoring technology based on UV-Vis spectrum analysis are briefly reviewed. And the research status and advances are introduced from two aspects, on-line monitoring and in-situ monitoring. Moreover, the existent key technical problems are put forward. Finally, the technology trends of multi-parameter water quality monitoring microsystem and microsystem networks based on microspectrometer are prospected, which has certain reference value for the research and development of environmental monitoring technology and modern scientific instrument in the authors' country.

The influence of government actions on innovative activities in the development of environmental technologies to control sulfur dioxide emissions from stationary sources

NASA Astrophysics Data System (ADS)

Taylor, Margaret R.

2001-12-01

A better understanding of the influence of government actions on innovation is needed to inform future policy endeavors in areas ranging from industrial competitiveness to environmentally sustainable growth. Environmental control technology is a rich area for the study of this influence, since government has stronger incentives to promote innovation in these technologies than does the private sector. This dissertation investigated the case of sulfur dioxide (SO2) control technologies for electric power plants. In studying innovation in these technologies, it was very important to understand the details of these technologies as well as their long organizational history. These technologies have been affected by government actions ranging from government-sponsored research and technology transfer mechanisms to national regulatory events. The dissertation integrated insights from several complementary and repeatable innovation evaluation methods; this approach supported a fuller understanding of innovation while it structured the research results for potential future comparative analysis. Innovative activities were investigated through: patent activity analysis; technical content analysis and researcher co-authorship network analysis in a conference held for over twenty years; learning curve analysis for eighty-eight U.S. power plants; and a dozen expert interviews from a variety of innovative actors. Innovative outcomes were investigated through: analysis of observed improvements in newly installed technologies over time; evaluation of historic cost studies on standardized systems; and expert interviews. Several policy-relevant findings resulted from this dissertation. (1) The existence of national government regulation stimulated inventive activity more than government research support alone. (2) The existence and the anticipation of government regulation appeared to spur inventive activity, while regulatory stringency appeared to drive inventive activity and the communication process underlying knowledge transfer and diffusion. (3) The regulatory-forced adoption of SO2 control technologies led to a learning curve effect in which operating experience with the equipment resulted in significant cost improvements. This learning curve effect is comparable with findings in many other industries and is likely to be useful in predictions of the costs of future environmental technologies. (4) Performance improvements and cost reductions occurred in a quantifiable fashion as the technology became more widely adopted.

NASA Subsonic Rotary Wing Project-Multidisciplinary Analysis and Technology Development: Overview

NASA Technical Reports Server (NTRS)

Yamauchi, Gloria K.

2009-01-01

This slide presentation reviews the objectives of the Multidisciplinary Analysis and Technology Development (MDATD) in the Subsonic Rotary Wing project. The objectives are to integrate technologies and analyses to enable advanced rotorcraft and provide a roadmap to guide Level 1 and 2 research. The MDATD objectives will be met by conducting assessments of advanced technology benefits, developing new or enhanced design tools, and integrating Level 2 discipline technologies to develop and enable system-level analyses and demonstrations.

Influences on selection of assistive technology for young children in South Africa: perspectives from rehabilitation professionals.

PubMed

van Niekerk, Karin; Dada, Shakila; Tönsing, Kerstin

2017-12-20

Selection of assistive technology for young children is a complex process. Within a context with limited resources, such as South Africa, research is needed to determine the factors influencing the assistive technology selection process, as these could ultimately either facilitate or hinder the availability and accessibility of affordable, adaptable, acceptable, and high quality assistive technology for this age group. Two asynchronous online focus groups were conducted with 16 rehabilitation professionals to identify the factors they perceived to influence the selection and provision of assistive technology to young children within the South African context. A process of deductive thematic analysis was followed by inductive analysis of the data. Components of the Assistive Technology Device Selection Framework were used as themes to guide the deductive analysis, followed by inductive analysis to create subthemes. The important role of the professional was highlighted in negotiating all the factors to consider in the assistive technology selection and provision process. Adaptation of the Assistive Technology Device Selection Framework is suggested in order to facilitate application to low resourced contexts, such as South Africa. Implications for rehabilitation Assistive technology selection is a complex process with factors pertaining to the users (child and family) of the assistive technology, as well as the rehabilitation professional recommending the assistive technology influencing the process. Although it may be an important factor, the availability of financial resources to purchase assistive technology is not the only determining factor in providing appropriate assistive technology to young children in contexts with limited resources. Formalized support, such as reflective supervision or mentorship programs should be facilitated and utilized by recommending professionals. Home and school visits during assessment ensure a good match between assistive technology and users within the particular context. Facilitating the availability of assistive technology for trial during assessment and/or for a period afterwards will increase the likelihood that appropriate recommendations for assistive technology are made.

Computer-Aided Analysis of Patents for Product Technology Maturity Forecasting

NASA Astrophysics Data System (ADS)

Liang, Yanhong; Gan, Dequan; Guo, Yingchun; Zhang, Peng

Product technology maturity foresting is vital for any enterprises to hold the chance for innovation and keep competitive for a long term. The Theory of Invention Problem Solving (TRIZ) is acknowledged both as a systematic methodology for innovation and a powerful tool for technology forecasting. Based on TRIZ, the state -of-the-art on the technology maturity of product and the limits of application are discussed. With the application of text mining and patent analysis technologies, this paper proposes a computer-aided approach for product technology maturity forecasting. It can overcome the shortcomings of the current methods.

Life support systems analysis and technical trades for a lunar outpost

NASA Technical Reports Server (NTRS)

Ferrall, J. F.; Ganapathi, G. B.; Rohatgi, N. K.; Seshan, P. K.

1994-01-01

The NASA/JPL life support systems analysis (LISSA) software tool was used to perform life support system analysis and technology trades for a Lunar Outpost. The life support system was modeled using a chemical process simulation program on a steady-state, one-person, daily basis. Inputs to the LiSSA model include metabolic balance load data, hygiene load data, technology selection, process operational assumptions and mission parameter assumptions. A baseline set of technologies has been used against which comparisons have been made by running twenty-two cases with technology substitutions. System, subsystem, and technology weights and powers are compared for a crew of 4 and missions of 90 and 600 days. By assigning a weight value to power, equivalent system weights are compared. Several less-developed technologies show potential advantages over the baseline. Solid waste treatment technologies show weight and power disadvantages but one could have benefits associated with the reduction of hazardous wastes and very long missions. Technology development towards reducing the weight of resupplies and lighter materials of construction was recommended. It was also recommended that as technologies are funded for development, contractors should be required to generate and report data useful for quantitative technology comparisons.

Energy Analysis Publications | Energy Analysis | NREL

Science.gov Websites

Systems Impact Analysis We perform impact analysis to evaluate and understand the impact of markets publications. Featured Publications Complex Systems Analysis Complex systems analysis integrates all aspects of , policies, and financing on technology uptake and the impact of new technologies on markets and policy

Acousto-Optic Technology for Topographic Feature Extraction and Image Analysis.

DTIC Science & Technology

1981-03-01

This report contains all findings of the acousto - optic technology study for feature extraction conducted by Deft Laboratories Inc. for the U.S. Army...topographic feature extraction and image analysis using acousto - optic (A-O) technology. A conclusion of this study was that A-O devices are potentially

Affordance Analysis--Matching Learning Tasks with Learning Technologies

ERIC Educational Resources Information Center

Bower, Matt

2008-01-01

This article presents a design methodology for matching learning tasks with learning technologies. First a working definition of "affordances" is provided based on the need to describe the action potentials of the technologies (utility). Categories of affordances are then proposed to provide a framework for analysis. Following this, a…

Technology Outlook for Australian Tertiary Education 2013-2018: An NMC Horizon Project Regional Analysis

ERIC Educational Resources Information Center

Johnson, L.; Adams Becker, S.; Cummins, M.; Freeman, A.; Ifenthaler, D.; Vardaxis, N.

2013-01-01

The "Technology Outlook Australian Tertiary Education 2013-2018: An NMC Horizon Project Regional Analysis" reflects a collaborative research effort between the New Media Consortium (NMC) and Open Universities Australia to help inform Australian educational leaders about significant developments in technologies supporting teaching,…

Understanding the New Job-Analysis Technology.

ERIC Educational Resources Information Center

Aho, Kaye L.

1989-01-01

The author examines such trends as rapid job change, organizational decentralization, the need for increased productivity, legal challenges, and changing work force needs; the evolving job-analysis technology; and the potential impact of this technology on human resources professionals. She also summarizes the key features to look for in a…

Values in the Net Neutrality Debate: Applying Content Analysis to Testimonies from Public Hearings

ERIC Educational Resources Information Center

Cheng, An-Shou

2012-01-01

The Net neutrality debate is an important telecommunications policy issue that closely tied to technological innovation, economic development, and information access. Existing studies on Net neutrality have focused primarily on technological requirements, economic analysis, and regulatory justifications. Since values, technology, and policy are…

Low Carbon Technology Options for the Natural Gas ...

EPA Pesticide Factsheets

The ultimate goal of this task is to perform environmental and economic analysis of natural gas based power production technologies (different routes) to investigate and evaluate strategies for reducing emissions from the power sector. It is a broad research area. Initially, the research will be focused on the preliminary analyses of hydrogen fuel based power production technologies utilizing hydrogen fuel in a large size, heavy-duty gas turbines in integrated reformer combined cycle (IRCC) and integrated gasification combined cycle (IGCC) for electric power generation. The research will be expanded step-by-step to include other advanced (e.g., Net Power, a potentially transformative technology utilizing a high efficiency CO2 conversion cycle (Allam cycle), and chemical looping etc.) pre-combustion and post-combustion technologies applied to natural gas, other fossil fuels (coal and heavy oil) and biomass/biofuel based on findings. Screening analysis is already under development and data for the analysis is being processed. The immediate action on this task include preliminary economic and environmental analysis of power production technologies applied to natural gas. Data for catalytic reforming technology to produce hydrogen from natural gas is being collected and compiled on Microsoft Excel. The model will be expanded for exploring and comparing various technologies scenarios to meet our goal. The primary focus of this study is to: 1) understand the chemic

Evaluating Learning Technology Content with Discourse Analysis

ERIC Educational Resources Information Center

Duvall, Matthew

2016-01-01

The researcher combined qualitative media analysis with tools for discourse analysis to review Blackboard Collaborate™, a tool often used in online education. Technology design references Discourses which dictate how and why these tools should be used. The analysis showed Collaborate™ uses sign systems and knowledge, along with politics, to…

The Effect of Online Systems Analysis Training on Aerospace Industry Business Performance: A Qualitative Study

ERIC Educational Resources Information Center

Burk, Erlan

2012-01-01

Aerospace companies needed additional research on technology-based training to verify expectations when enhancing human capital through online systems analysis training. The research for online systems analysis training provided aerospace companies a means to verify expectations for systems analysis technology-based training on business…

General Mission Analysis Tool (GMAT) Mathematical Specifications

NASA Technical Reports Server (NTRS)

Hughes, Steve

2007-01-01

The General Mission Analysis Tool (GMAT) is a space trajectory optimization and mission analysis system developed by NASA and private industry in the spirit of the NASA Mission. GMAT contains new technology and is a testbed for future technology development.

General Mission Analysis Tool (GMAT)

NASA Technical Reports Server (NTRS)

Hughes, Steven P.

2007-01-01

The General Mission Analysis Tool (GMAT) is a space trajectory optimization and mission analysis system developed by NASA and private industry in the spirit of the NASA Mission. GMAT contains new technology and is a testbed for future technology development. The goal of the GMAT project is to develop new space trajectory optimization and mission design technology by working inclusively with ordinary people, universities, businesses, and other government organizations, and to share that technology in an open and unhindered way. GMAT is a free and open source software system licensed under the NASA Open Source Agreement: free for anyone to use in development of new mission concepts or to improve current missions, freely available in source code form for enhancement or further technology development.

XML technology planning database : lessons learned

NASA Technical Reports Server (NTRS)

Some, Raphael R.; Neff, Jon M.

2005-01-01

A hierarchical Extensible Markup Language(XML) database called XCALIBR (XML Analysis LIBRary) has been developed by Millennium Program to assist in technology investment (ROI) analysis and technology Language Capability the New return on portfolio optimization. The database contains mission requirements and technology capabilities, which are related by use of an XML dictionary. The XML dictionary codifies a standardized taxonomy for space missions, systems, subsystems and technologies. In addition to being used for ROI analysis, the database is being examined for use in project planning, tracking and documentation. During the past year, the database has moved from development into alpha testing. This paper describes the lessons learned during construction and testing of the prototype database and the motivation for moving from an XML taxonomy to a standard XML-based ontology.

Advanced life support study

NASA Technical Reports Server (NTRS)

1991-01-01

Summary reports on each of the eight tasks undertaken by this contract are given. Discussed here is an evaluation of a Closed Ecological Life Support System (CELSS), including modeling and analysis of Physical/Chemical Closed Loop Life Support (P/C CLLS); the Environmental Control and Life Support Systems (ECLSS) evolution - Intermodule Ventilation study; advanced technologies interface requirements relative to ECLSS; an ECLSS resupply analysis; the ECLSS module addition relocation systems engineering analysis; an ECLSS cost/benefit analysis to identify rack-level interface requirements of the alternate technologies evaluated in the ventilation study, with a comparison of these with the rack level interface requirements for the baseline technologies; advanced instrumentation - technology database enhancement; and a clean room survey and assessment of various ECLSS evaluation options for different growth scenarios.

An application of multiattribute decision analysis to the Space Station Freedom program. Case study: Automation and robotics technology evaluation

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Levin, Richard R.; Carpenter, Elisabeth J.

1990-01-01

The results are described of an application of multiattribute analysis to the evaluation of high leverage prototyping technologies in the automation and robotics (A and R) areas that might contribute to the Space Station (SS) Freedom baseline design. An implication is that high leverage prototyping is beneficial to the SS Freedom Program as a means for transferring technology from the advanced development program to the baseline program. The process also highlights the tradeoffs to be made between subsidizing high value, low risk technology development versus high value, high risk technology developments. Twenty one A and R Technology tasks spanning a diverse array of technical concepts were evaluated using multiattribute decision analysis. Because of large uncertainties associated with characterizing the technologies, the methodology was modified to incorporate uncertainty. Eight attributes affected the rankings: initial cost, operation cost, crew productivity, safety, resource requirements, growth potential, and spinoff potential. The four attributes of initial cost, operations cost, crew productivity, and safety affected the rankings the most.

Air Force Research Laboratory space technology strategic investment model: analysis and outcomes for warfighter capabilities

NASA Astrophysics Data System (ADS)

Preiss, Bruce; Greene, Lloyd; Kriebel, Jamie; Wasson, Robert

2006-05-01

The Air Force Research Laboratory utilizes a value model as a primary input for space technology planning and budgeting. The Space Sector at AFRL headquarters manages space technology investment across all the geographically disparate technical directorates and ensures that integrated planning is achieved across the space community. The space investment portfolio must ultimately balance near, mid, and far-term investments across all the critical space mission areas. Investment levels and growth areas can always be identified by a typical capability analysis or gap analysis, but the value model approach goes one step deeper and helps identify the potential payoff of technology investments by linking the technology directly to an existing or potential concept. The value of the technology is then viewed from the enabling performance perspective of the concept that ultimately fulfills the Air Force mission. The process of linking space technologies to future concepts and technology roadmaps will be reviewed in this paper, along with representative results from this planning cycle. The initial assumptions in this process will be identified along with the strengths and weaknesses of this planning methodology.

Plant stress analysis technology deployment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ebadian, M.A.

1998-01-01

Monitoring vegetation is an active area of laser-induced fluorescence imaging (LIFI) research. The Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU) is assisting in the transfer of the LIFI technology to the agricultural private sector through a market survey. The market survey will help identify the key eco-agricultural issues of the nations that could benefit from the use of sensor technologies developed by the Office of Science and Technology (OST). The principal region of interest is the Western Hemisphere, particularly, the rapidly growing countries of Latin America and the Caribbean. The analysis of needs will assure thatmore » the focus of present and future research will center on economically important issues facing both hemispheres. The application of the technology will be useful to the agriculture industry for airborne crop analysis as well as in the detection and characterization of contaminated sites by monitoring vegetation. LIFI airborne and close-proximity systems will be evaluated as stand-alone technologies and additions to existing sensor technologies that have been used to monitor crops in the field and in storage.« less

Comprehensive helicopter analysis: A state of the art review

NASA Technical Reports Server (NTRS)

Johnson, W.

1978-01-01

An assessment of the status of helicopter theory and analysis is presented. The technology level embodied in available design tools (computer programs) is examined, considering the problem areas of performance, loads and vibration, handling qualities and simulation, and aeroelastic stability. The effectiveness of the present analyses is discussed. The characteristics of the technology in the analyses are reviewed, including the aerodynamics technology, induced velocity and wake geometry, dynamics technology, and machine limitations.

Interface Technology for Geometrically Nonlinear Analysis of Multiple Connected Subdomains

NASA Technical Reports Server (NTRS)

Ransom, Jonathan B.

1997-01-01

Interface technology for geometrically nonlinear analysis is presented and demonstrated. This technology is based on an interface element which makes use of a hybrid variational formulation to provide for compatibility between independently modeled connected subdomains. The interface element developed herein extends previous work to include geometric nonlinearity and to use standard linear and nonlinear solution procedures. Several benchmark nonlinear applications of the interface technology are presented and aspects of the implementation are discussed.

Health Monitoring System Technology Assessments: Cost Benefits Analysis

NASA Technical Reports Server (NTRS)

Kent, Renee M.; Murphy, Dennis A.

2000-01-01

The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

The Content of Educational Technology Curricula: A Cross-Curricular State of the Art

ERIC Educational Resources Information Center

Aesaert, Koen; Vanderlinde, Ruben; Tondeur, Jo; van Braak, Johan

2013-01-01

The purpose of this study is to analyze the content features of educational technology curricula for primary education developed by national governments. A qualitative cross-case document analysis of the national educational technology curriculum of Norway, Flanders and England was conducted. The analysis focuses on the underlying visions,…

Deriving a Typology of Web 2.0 Learning Technologies

ERIC Educational Resources Information Center

Bower, Matt

2016-01-01

This paper presents the methods and outcomes of a typological analysis of Web 2.0 technologies. A comprehensive review incorporating over 2000 links led to identification of over 200 Web 2.0 technologies that were suitable for learning and teaching purposes. The typological analysis involved development of relevant Web 2.0 dimensions, grouping…

A Meta-Analysis of Effectiveness Studies on Computer Technology-Supported Language Learning

ERIC Educational Resources Information Center

Grgurovic, Maja; Chapelle, Carol A.; Shelley, Mack C.

2013-01-01

With the aim of summarizing years of research comparing pedagogies for second/foreign language teaching supported with computer technology and pedagogy not-supported by computer technology, a meta-analysis was conducted of empirical research investigating language outcomes. Thirty-seven studies yielding 52 effect sizes were included, following a…

Environmental Technology (Laboratory Analysis and Environmental Sampling) Curriculum Development Project. Final Report.

ERIC Educational Resources Information Center

Hinojosa, Oscar V.; Guillen, Alfonso

A project assessed the need and developed a curriculum for environmental technology (laboratory analysis and environmental sampling) in the emerging high technology centered around environmental safety and health in Texas. Initial data were collected through interviews by telephone and in person and through onsite visits. Additional data was…

Barriers to Successful Implementation of Technology Integration in Educational Settings: A Case Study

ERIC Educational Resources Information Center

Laferrière, T.; Hamel, C.; Searson, M.

2013-01-01

Representing issues discussed at the EduSummIT 2011 relative to essential conditions and barriers to successful technology integration, this article presents a systemic analysis of barriers that needed to be overcome for an information technology initiative (Remote Networked School project) to be successfully implemented. The analysis was…

Innovative Technology-Based Interventions for Autism Spectrum Disorders: A Meta-Analysis

ERIC Educational Resources Information Center

Grynszpan, Ouriel; Weiss, Patrice L.; Perez-Diaz, Fernando; Gal, Eynat

2014-01-01

This article reports the results of a meta-analysis of technology-based intervention studies for children with autism spectrum disorders. We conducted a systematic review of research that used a pre-post design to assess innovative technology interventions, including computer programs, virtual reality, and robotics. The selected studies provided…

Education for Sustainable Development in Technology Education in Irish Schools: A Curriculum Analysis

ERIC Educational Resources Information Center

McGarr, Oliver

2010-01-01

This paper explores the integration of Education for Sustainable Development (ESD) in technology education and the extent to which it is currently addressed in curriculum documents and state examinations in technology education at post-primary level in Ireland. This analysis is conducted amidst the backdrop of considerable change in technology…

Application of mathematical methods of analysis in selection of competing information technologies

NASA Astrophysics Data System (ADS)

Semenov, V. L.; Kadyshev, E. N.; Zakharova, A. N.; Patianova, A. O.; Dulina, G. S.

2018-05-01

The article discusses the use of qualimetry methods using the apparatus of mathematical analysis in the formation of the integral index that allows one to select the best option among competing information technology. The authors propose the use of affine space in the evaluation and selection of competing information technologies.

Educational Technology--Mapping the Terrain with Bernstein as Cartographer

ERIC Educational Resources Information Center

Czerniewicz, L.

2010-01-01

This paper uses the literature of educational technology as the site of analysis in order to map the field of educational technology. Having considered Kuhn and Bourdieu's theories, the paper frames the analysis of the field in Bernsteinian terms as a horizontal knowledge structure in a vertical knowledge discourse. Using the concepts of…

Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

NASA Technical Reports Server (NTRS)

Krishen, Kumar (Compiler)

1994-01-01

This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

Coal conversion processes and analysis methodologies for synthetic fuels production. [technology assessment and economic analysis of reactor design for coal gasification

NASA Technical Reports Server (NTRS)

1979-01-01

Information to identify viable coal gasification and utilization technologies is presented. Analysis capabilities required to support design and implementation of coal based synthetic fuels complexes are identified. The potential market in the Southeast United States for coal based synthetic fuels is investigated. A requirements analysis to identify the types of modeling and analysis capabilities required to conduct and monitor coal gasification project designs is discussed. Models and methodologies to satisfy these requirements are identified and evaluated, and recommendations are developed. Requirements for development of technology and data needed to improve gasification feasibility and economies are examined.

How different types of users develop trust in technology: A qualitative analysis of the antecedents of active and passive user trust in a shared technology

PubMed Central

Xu, Jie; Le, Kim; Deitermann, Annika; Montague, Enid

2014-01-01

The aim of this study was to investigate the antecedents of trust in technology for active users and passive users working with a shared technology. According to the prominence-interpretation theory, to assess the trustworthiness of a technology, a person must first perceive and evaluate elements of the system that includes the technology. An experimental study was conducted with 54 participants who worked in two-person teams in a multi-task environment with a shared technology. Trust in technology was measured using a trust in technology questionnaire and antecedents of trust were elicited using an open-ended question. A list of antecedents of trust in technology was derived using qualitative analysis techniques. The following categories emerged from the antecedent: technology factors, user factors, and task factors. Similarities and differences between active users and passive user responses, in terms of trust in technology were discussed. PMID:24882059

How different types of users develop trust in technology: a qualitative analysis of the antecedents of active and passive user trust in a shared technology.

PubMed

Xu, Jie; Le, Kim; Deitermann, Annika; Montague, Enid

2014-11-01

The aim of this study was to investigate the antecedents of trust in technology for active users and passive users working with a shared technology. According to the prominence-interpretation theory, to assess the trustworthiness of a technology, a person must first perceive and evaluate elements of the system that includes the technology. An experimental study was conducted with 54 participants who worked in two-person teams in a multi-task environment with a shared technology. Trust in technology was measured using a trust in technology questionnaire and antecedents of trust were elicited using an open-ended question. A list of antecedents of trust in technology was derived using qualitative analysis techniques. The following categories emerged from the antecedent: technology factors, user factors, and task factors. Similarities and differences between active users and passive user responses, in terms of trust in technology were discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Toward a technology of derived stimulus relations: an analysis of articles published in the journal of applied behavior analysis, 1992-2009.

PubMed

Rehfeldt, Ruth Anne

2011-01-01

Every article on stimulus equivalence or derived stimulus relations published in the Journal of Applied Behavior Analysis was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure (automated vs. tabletop), stimuli, and stimulus sensory modality; types of relations targeted and emergent skills demonstrated by participants; and presence versus absence of evaluation of generalization and maintenance. In most respects, published reports suggested the possibility of applied technologies but left the difficult work of technology development to future investigations, suggestions for which are provided.

A decision model for selecting sustainable drinking water supply and greywater reuse systems for developing communities with a case study in Cimahi, Indonesia.

PubMed

Henriques, Justin J; Louis, Garrick E

2011-01-01

Capacity Factor Analysis is a decision support system for selection of appropriate technologies for municipal sanitation services in developing communities. Developing communities are those that lack the capability to provide adequate access to one or more essential services, such as water and sanitation, to their residents. This research developed two elements of Capacity Factor Analysis: a capacity factor based classification for technologies using requirements analysis, and a matching policy for choosing technology options. First, requirements analysis is used to develop a ranking for drinking water supply and greywater reuse technologies. Second, using the Capacity Factor Analysis approach, a matching policy is developed to guide decision makers in selecting the appropriate drinking water supply or greywater reuse technology option for their community. Finally, a scenario-based informal hypothesis test is developed to assist in qualitative model validation through case study. Capacity Factor Analysis is then applied in Cimahi Indonesia as a form of validation. The completed Capacity Factor Analysis model will allow developing communities to select drinking water supply and greywater reuse systems that are safe, affordable, able to be built and managed by the community using local resources, and are amenable to expansion as the community's management capacity increases. Copyright © 2010 Elsevier Ltd. All rights reserved.

Clearing the Fog of Anticancer Patents from 1993–2013: Through an In-Depth Technology Landscape & Target Analysis from Pioneer Research Institutes and Universities Worldwide

PubMed Central

Dara, Ajay; Sangamwar, Abhay T.

2014-01-01

Background In a search for an effective anticancer therapy the R&D units from leading universities and institutes reveal numerous technologies in the form of patent documents. The article addressed comparative anticancer patent landscape and technology assessment of Council of Scientific and Industrial Research (CSIR): India’s largest R&D organisation with top twenty international public funded universities and institutes from eight different countries. Methodology/Principal Findings The methodology include quantitative and qualitative assessment based on the bibliometric parameters and manual technology categorisation to understand the changing patent trends and recent novel technologies. The research finding analysed 25,254 patent documents from the year 1993 to 2013 and reported the insights of latest anticancer technologies and targets through categorisation studies at the level of drug discovery, development and treatment & diagnosis. The article has reported the technology correlation matrix of twelve secondary class technologies with 34 tertiary sub-class research area to identify the leading technologies and scope of future research through whitespaces analysis. In addition, the results have also addressed the target analysis, leading inventor, assignee, collaboration network, geographical distribution, patent trend analysis, citation maps and technology assessment with respect to international patent classification systems such as CPC, IPC and CPI codes. Conclusions/Significance The result suggested peptide technology as the dominating research area next to gene therapy, vaccine and medical preparation containing organic compounds. The Indian CSIR has ranked itself at seventh position among the top 20 universities. Globally, the anticancer research was focused in the area of genetics and immunology, whereas Indian CSIR reported more patents related to plant extract and organic preparation. The article provided a glimpse of two decade anticancer scenario with respect to top public funded universities worldwide. PMID:25083710

Clearing the fog of anticancer patents from 1993-2013: through an in-depth technology landscape & target analysis from pioneer research institutes and universities worldwide.

PubMed

Dara, Ajay; Sangamwar, Abhay T

2014-01-01

In a search for an effective anticancer therapy the R&D units from leading universities and institutes reveal numerous technologies in the form of patent documents. The article addressed comparative anticancer patent landscape and technology assessment of Council of Scientific and Industrial Research (CSIR): India's largest R&D organisation with top twenty international public funded universities and institutes from eight different countries. The methodology include quantitative and qualitative assessment based on the bibliometric parameters and manual technology categorisation to understand the changing patent trends and recent novel technologies. The research finding analysed 25,254 patent documents from the year 1993 to 2013 and reported the insights of latest anticancer technologies and targets through categorisation studies at the level of drug discovery, development and treatment & diagnosis. The article has reported the technology correlation matrix of twelve secondary class technologies with 34 tertiary sub-class research area to identify the leading technologies and scope of future research through whitespaces analysis. In addition, the results have also addressed the target analysis, leading inventor, assignee, collaboration network, geographical distribution, patent trend analysis, citation maps and technology assessment with respect to international patent classification systems such as CPC, IPC and CPI codes. The result suggested peptide technology as the dominating research area next to gene therapy, vaccine and medical preparation containing organic compounds. The Indian CSIR has ranked itself at seventh position among the top 20 universities. Globally, the anticancer research was focused in the area of genetics and immunology, whereas Indian CSIR reported more patents related to plant extract and organic preparation. The article provided a glimpse of two decade anticancer scenario with respect to top public funded universities worldwide.

Single-Cell Analysis Using Hyperspectral Imaging Modalities.

PubMed

Mehta, Nishir; Shaik, Shahensha; Devireddy, Ram; Gartia, Manas Ranjan

2018-02-01

Almost a decade ago, hyperspectral imaging (HSI) was employed by the NASA in satellite imaging applications such as remote sensing technology. This technology has since been extensively used in the exploration of minerals, agricultural purposes, water resources, and urban development needs. Due to recent advancements in optical re-construction and imaging, HSI can now be applied down to micro- and nanometer scales possibly allowing for exquisite control and analysis of single cell to complex biological systems. This short review provides a description of the working principle of the HSI technology and how HSI can be used to assist, substitute, and validate traditional imaging technologies. This is followed by a description of the use of HSI for biological analysis and medical diagnostics with emphasis on single-cell analysis using HSI.

Evaluating New Technology.

PubMed

Carniol, Paul J; Heffelfinger, Ryan N; Grunebaum, Lisa D

2018-05-01

There are multiple complex issues to consider when evaluating any new technology. First evaluate the efficacy of the device. Then considering your patient population decide whether this technology brings an added benefit to your patients. If it meets these 2 criteria, then proceed to the financial analysis of acquiring this technology. The complete financial analysis has several important components that include but are not limited to cost, value, alternatives, return on investment, and associated marketing expense. Copyright © 2018 Elsevier Inc. All rights reserved.

Application of Statistics in Engineering Technology Programs

ERIC Educational Resources Information Center

Zhan, Wei; Fink, Rainer; Fang, Alex

2010-01-01

Statistics is a critical tool for robustness analysis, measurement system error analysis, test data analysis, probabilistic risk assessment, and many other fields in the engineering world. Traditionally, however, statistics is not extensively used in undergraduate engineering technology (ET) programs, resulting in a major disconnect from industry…

1992 NASA Life Support Systems Analysis workshop

NASA Technical Reports Server (NTRS)

Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.

1992-01-01

The 1992 Life Support Systems Analysis Workshop was sponsored by NASA's Office of Aeronautics and Space Technology (OAST) to integrate the inputs from, disseminate information to, and foster communication among NASA, industry, and academic specialists. The workshop continued discussion and definition of key issues identified in the 1991 workshop, including: (1) modeling and experimental validation; (2) definition of systems analysis evaluation criteria; (3) integration of modeling at multiple levels; and (4) assessment of process control modeling approaches. Through both the 1991 and 1992 workshops, NASA has continued to seek input from industry and university chemical process modeling and analysis experts, and to introduce and apply new systems analysis approaches to life support systems. The workshop included technical presentations, discussions, and interactive planning, with sufficient time allocated for discussion of both technology status and technology development recommendations. Key personnel currently involved with life support technology developments from NASA, industry, and academia provided input to the status and priorities of current and future systems analysis methods and requirements.

Developing an instrument for assessing students' concepts of the nature of technology

NASA Astrophysics Data System (ADS)

Liou, Pey-Yan

2015-05-01

Background:The nature of technology has been rarely discussed despite the fact that technology plays an essential role in modern society. It is important to discuss students' concepts of the nature of technology, and further to advance their technological literacy and adaptation to modern society. There is a need to assess high school students' concepts of the nature of technology. Purpose:This study aims to engage in discourse on students' concepts of the nature of technology based on a proposed theoretical framework. Moreover, another goal is to develop an instrument for measuring students' concepts of the nature of technology. Sample:Four hundred and fifty-five high school students' perceptions of technology were qualitatively analyzed. Furthermore, 530 students' responses to a newly developed questionnaire were quantitatively analyzed in the final test. Design and method:First, content analysis was utilized to discuss and categorize students' statements regarding technology and its related issues. The Student Concepts of the Nature of Technology Questionnaire was developed based on the proposed theoretical framework and was supported by the students' qualitative data. Finally, exploratory factor analysis and reliability analysis were applied to determine the structure of the items and the internal consistency of each scale. Results:Through a process of instrument development, the Student Concepts of the Nature of Technology Questionnaire was shown to be a valid and reliable tool for measuring students' concepts of the nature of technology. This newly developed questionnaire is composed of 29 items in six scales, namely 'technology as artifacts,' 'technology as an innovation change,' 'the current role of technology in society,' 'technology as a double-edged sword,' 'technology as a science-based form,' and 'history of technology.' Conclusions:The Student Concepts of the Nature of Technology Questionnaire has been confirmed as a reasonably valid and reliable instrument. This study provides a useful questionnaire for educational researchers and practitioners for measuring students' concepts of the nature of technology.

Safety System Design for Technology Education. A Safety Guide for Technology Education Courses K-12.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

This manual is designed to involve both teachers and students in planning and controlling a safety system for technology education classrooms. The safety program involves students in the design and maintenance of the system by including them in the analysis of the classroom environment, job safety analysis, safety inspection, and machine safety…

The Regulation of Technology-Assisted Distance Counseling and Supervision in the United States: An Analysis of Current Extent, Trends, and Implications

ERIC Educational Resources Information Center

McAdams, Charles R.; Wyatt, Kristi Lee

2010-01-01

Counseling licensure boards report emerging needs to regulate technology-assisted distance counseling and supervision. An analysis of published regulations and telephone interviews with board administrators nationwide suggests that boards agree generally on 7 aspects of technology-assisted distance practice that need to be regulated. Nevertheless,…

Comparative Analysis of Pedagogical Technologies in the Context of Future Agrarians' Multicultural Education in the USA

ERIC Educational Resources Information Center

Kravets, Ruslan

2015-01-01

In the article the comparative analysis of pedagogical technologies in the USA has been carried out in the context of future agrarians' multicultural education. The essence of traditional and innovative pedagogical technologies and the peculiarities of their realization at higher educational establishments have been viewed. The expediency of…

Analysis of Job Announcements and the Required Competencies for Instructional Technology Professionals.

ERIC Educational Resources Information Center

Moallem, Mahnaz

A study was conducted to analyze current job announcements in the field of instructional design and technology and to produce descriptive information that portrays the required skills and areas of knowledge for instructional technology graduates. Content analysis, in its general terms, was used as the research method for this study. One hundred…

Analysis of an Interactive Technology Supported Problem-Based Learning STEM Project Using Selected Learning Sciences Interest Areas (SLSIA)

ERIC Educational Resources Information Center

Kumar, David Devraj

2017-01-01

This paper reports an analysis of an interactive technology-supported, problem-based learning (PBL) project in science, technology, engineering and mathematics (STEM) from a Learning Sciences perspective using the Selected Learning Sciences Interest Areas (SLSIA). The SLSIA was adapted from the "What kinds of topics do ISLS [International…

Benefits and Pitfalls of Multimedia and Interactive Features in Technology-Enhanced Storybooks: A Meta-Analysis

ERIC Educational Resources Information Center

Takacs, Zsofia K.; Swart, Elise K.; Bus, Adriana G.

2015-01-01

A meta-analysis was conducted on the effects of technology-enhanced stories for young children's literacy development when compared to listening to stories in more traditional settings like storybook reading. A small but significant additional benefit of technology was found for story comprehension (g+ = 0.17) and expressive vocabulary (g+ =…

Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D Laser Scanning Technology, and Collaborative Product Lifecycle Management on Ship Maintenance and Modernization Cost Savings

DTIC Science & Technology

2016-01-30

SPONSORED REPORT SERIES Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D Laser Scanning Technology, and Collaborative...Report Series Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D Laser Scanning Technology, and Collaborative Product Lifecycle...Application Areas for 3D Printing ........................................................ 36 Figure 15. Potential Applications of 3D

High Energy Laser Technology Assessment: Volume 1. The Technology Assessment: An Initial Study

DTIC Science & Technology

1975-01-01

technically feasible and economically cost effective Such an analysis is beyord the capability of this exploratory study Therefore, to proceed with... Analysis R&D Management fffft jygJfQ JQ Q^^ 20 ABSTRACT fConllnu* im r«»«ra« •!«#• II ifcmmnmrr mt4 Idtmllty hf Heck A technology assessment ha...by an abreviated impact analysis whose intent is to be illustrative of the methodology, rather than be a comprehensive treatment of the subject. 00

The Clean Energy Manufacturing Analysis Center (CEMAC): Providing Analysis and Insights on Clean Technology Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Nicholi S

The U.S. Department of Energy's Clean Energy Manufacturing Analysis Center (CEMAC) provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Policymakers and industry leaders seek CEMAC insights to inform choices to promote economic growth and the transition to a clean energy economy.

Dual-Use Space Technology Transfer Conference and Exhibition. Volume 1

NASA Technical Reports Server (NTRS)

Krishen, Kumar (Compiler)

1994-01-01

This document contains papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; new ways of doing business; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; ans robotics technologies. More than 77 papers, 20 presentations, and 20 exhibits covering various disciplines were presented b experts from NASA, universities, and industry.

NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

NASA Technical Reports Server (NTRS)

ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

The Status of Spacecraft Bus and Platform Technology Development under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Glaab, Louis; Peterson, Todd

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System and ultralightweight propellant tank technologies. Future directions for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV); and 3) electric propulsion. These technologies are more vehicles and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These inspace propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

The status of spacecraft bus and platform technology development under the NASA ISPT program

NASA Astrophysics Data System (ADS)

Anderson, D. J.; Munk, M. M.; Pencil, E.; Dankanich, J.; Glaab, L.; Peterson, T.

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA's Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN& C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System and ultra-lightweight propellant tank technologies. Future directions for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV); and 3) electric propulsion. These technologies are more vehicles and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicabilit- to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

The Status of Spacecraft Bus and Platform Technology Development Under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric J.; Dankanich, John; Glaab, Louis J.

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance 2) NASAs Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future direction for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV) 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) and 3) electric propulsion. These technologies are more vehicle and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

Aircraft System Analysis of Technology Benefits to Civil Transport Rotorcraft

NASA Technical Reports Server (NTRS)

Wilkerson, Joseph B.; Smith, Roger L.

2008-01-01

An aircraft systems analysis was conducted to evaluate the net benefits of advanced technologies on two conceptual civil transport rotorcraft, to quantify the potential of future civil rotorcraft to become operationally viable and economically competitive, with the ultimate goal of alleviating congestion in our airways, runways and terminals. These questions are three of many that must be resolved for the successful introduction of civil transport rotorcraft: 1) Can civil transport rotorcraft actually relieve current airport congestion and improve overall air traffic and passenger throughput at busy hub airports? What is that operational scenario? 2) Can advanced technology make future civil rotorcraft economically competitive in scheduled passenger transport? What are those enabling technologies? 3) What level of investment is necessary to mature the key enabling technologies? This study addresses the first two questions, and several others, by applying a systems analysis approach to a broad spectrum of potential advanced technologies at a conceptual level of design. The method was to identify those advanced technologies that showed the most promise and to quantify their benefits to the design, development, production, and operation of future civil rotorcraft. Adjustments are made to sizing data by subject matter experts to reflect the introduction of new technologies that offer improved performance, reduced weight, reduced maintenance, or reduced cost. This study used projected benefits from new, advanced technologies, generally based on research results, analysis, or small-scale test data. The technologies are identified, categorized and quantified in the report. The net benefit of selected advanced technologies is quantified for two civil transport rotorcraft concepts, a Single Main Rotor Compound (SMRC) helicopter designed for 250 ktas cruise airspeed and a Civil Tilt Rotor (CTR) designed for 350 ktas cruise airspeed. A baseline design of each concept was sized for a representative civil passenger transport mission, using current technology. Individual advanced technologies are quantified and applied to resize the aircraft, thereby quantifying the net benefit of that technology to the rotorcraft. Estimates of development cost, production cost and operating and support costs are made with a commercial cost estimating program, calibrated to Boeing products with adjustments for future civil production processes. A cost metric of cash direct operating cost per available seat-mile (DOC ASM) is used to compare the cost benefit of the technologies. The same metric is used to compare results with turboprop operating costs. Reduced engine SFC was the most advantageous advanced technology for both rotorcraft concepts. Structural weight reduction was the second most beneficial technology, followed by advanced drive systems and then by technology for rotorcraft performance. Most of the technologies evaluated in this report should apply similarly to conventional helicopters. The implicit assumption is that resources will become available to mature the technologies for fullscale production aircraft. That assumption is certainly the weak link in any forecast of future possibilities. The analysis serves the purpose of identifying which technologies offer the most potential benefit, and thus the ones that should receive the highest priority for continued development. This study directly addressed the following NASA Subsonic Rotary Wing (SRW) subtopics: SR W.4.8.I.J Establish capability for rotorcraft system analysis and SRW. 4.8.I.4 Conduct limited technology benefit assessment on baseline rotorcraft configurations.

Smart roadside initiative macro benefit analysis : user’s guide for the benefit-cost analysis tool.

DOT National Transportation Integrated Search

2015-03-01

Through the Smart Roadside Initiative (SRI), a Benefit-Cost Analysis (BCA) tool was developed for the evaluation of various new transportation technologies at a State level and to provide results that could support technology adoption by a State Depa...

A New Methodology for Systematic Exploitation of Technology Databases.

ERIC Educational Resources Information Center

Bedecarrax, Chantal; Huot, Charles

1994-01-01

Presents the theoretical aspects of a data analysis methodology that can help transform sequential raw data from a database into useful information, using the statistical analysis of patents as an example. Topics discussed include relational analysis and a technology watch approach. (Contains 17 references.) (LRW)

Translational bioinformatics in the cloud: an affordable alternative

PubMed Central

2010-01-01

With the continued exponential expansion of publicly available genomic data and access to low-cost, high-throughput molecular technologies for profiling patient populations, computational technologies and informatics are becoming vital considerations in genomic medicine. Although cloud computing technology is being heralded as a key enabling technology for the future of genomic research, available case studies are limited to applications in the domain of high-throughput sequence data analysis. The goal of this study was to evaluate the computational and economic characteristics of cloud computing in performing a large-scale data integration and analysis representative of research problems in genomic medicine. We find that the cloud-based analysis compares favorably in both performance and cost in comparison to a local computational cluster, suggesting that cloud computing technologies might be a viable resource for facilitating large-scale translational research in genomic medicine. PMID:20691073

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA"s proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for the develpoment of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA's proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for development of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Land border monitoring with remote sensing technologies

NASA Astrophysics Data System (ADS)

Malinowski, Radoslaw

2010-09-01

The remote sensing technology has many practical applications in different fields of science and industry. There is also a need to examine its usefulness for the purpose of land border surveillance. This research started with analysis of potential direct use of Earth Observation technology for monitoring migrations of people and preventing smuggling. The research, however, proved that there are still many fields within which the EO technology needs to be improved. From that point the analysis focused on improving Border Permeability Index which utilizes EO techniques as a source of information. The result of BPI analysis with use of high resolution data provides new kind of information which can support and make more effective work of authorities from security domain.

NASA In-Space Propulsion Technologies and Their Infusion Potential

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil,Eric J.; Peterson, Todd; Vento, Daniel; Munk, Michelle M.; Glaab, Louis J.; Dankanich, John W.

2012-01-01

The In-Space Propulsion Technology (ISPT) program has been developing in-space propulsion technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (Electric and Chemical), Entry Vehicle Technologies (Aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies that will be ready for flight infusion in the near future will be Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future focuses for ISPT are sample return missions and other spacecraft bus technologies like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions; and 3) electric propulsion for sample return and low cost missions. These technologies are more vehicle-focused, and present a different set of technology infusion challenges. While the Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

Cloud Based Resource for Data Hosting, Visualization and Analysis Using UCSC Cancer Genomics Browser | Informatics Technology for Cancer Research (ITCR)

Cancer.gov

The Cancer Analysis Virtual Machine (CAVM) project will leverage cloud technology, the UCSC Cancer Genomics Browser, and the Galaxy analysis workflow system to provide investigators with a flexible, scalable platform for hosting, visualizing and analyzing their own genomic data.

The effect of information technology on hospital performance.

PubMed

Williams, Cynthia; Asi, Yara; Raffenaud, Amanda; Bagwell, Matt; Zeini, Ibrahim

2016-12-01

While healthcare entities have integrated various forms of health information technology (HIT) into their systems due to claims of increased quality and decreased costs, as well as various incentives, there is little available information about which applications of HIT are actually the most beneficial and efficient. In this study, we aim to assist administrators in understanding the characteristics of top performing hospitals. We utilized data from the Health Information and Management Systems Society and the Center for Medicare and Medicaid to assess 1039 hospitals. Inputs considered were full time equivalents, hospital size, and technology inputs. Technology inputs included personal health records (PHR), electronic medical records (EMRs), computerized physician order entry systems (CPOEs), and electronic access to diagnostic results. Output variables were measures of quality, hospital readmission and mortality rate. The analysis was conducted in a two-stage methodology: Data Envelopment Analysis (DEA) and Automatic Interaction Detector Analysis (AID), decision tree regression (DTreg). Overall, we found that electronic access to diagnostic results systems was the most influential technological characteristics; however organizational characteristics were more important than technological inputs. Hospitals that had the highest levels of quality indicated no excess in the use of technology input, averaging one use of a technology component. This study indicates that prudent consideration of organizational characteristics and technology is needed before investing in innovative programs.

Evolutionary technology adoption in an oligopoly market with forward-looking firms

NASA Astrophysics Data System (ADS)

Lamantia, F.; Radi, D.

2018-05-01

In this paper, we propose an evolutionary oligopoly game of technology adoption in a market with isoelastic demand and two possible (linear) production technologies. While one technology is characterized by lower marginal costs, the magnitude of fixed costs entails that a technology does not necessarily dominate the other. Firms are forward-looking as they assess the profitability of employing either technology according to the corresponding expected profits. The dynamics of the system is studied through a piecewise-smooth map, for which we present a local stability analysis of equilibria and show the occurrence of smooth and border collision bifurcations. Global analysis of the model is also presented to show the coexistence of attractors and its economic significance. This investigation reveals that firms can fail to learn to adopt the more efficient technology.

Evolutionary technology adoption in an oligopoly market with forward-looking firms.

PubMed

Lamantia, F; Radi, D

2018-05-01

In this paper, we propose an evolutionary oligopoly game of technology adoption in a market with isoelastic demand and two possible (linear) production technologies. While one technology is characterized by lower marginal costs, the magnitude of fixed costs entails that a technology does not necessarily dominate the other. Firms are forward-looking as they assess the profitability of employing either technology according to the corresponding expected profits. The dynamics of the system is studied through a piecewise-smooth map, for which we present a local stability analysis of equilibria and show the occurrence of smooth and border collision bifurcations. Global analysis of the model is also presented to show the coexistence of attractors and its economic significance. This investigation reveals that firms can fail to learn to adopt the more efficient technology.

[Application of risk-based approach for determination of critical factors in technology transfer of production of medicinal products].

PubMed

Beregovykh, V V; Spitskiy, O R

2014-01-01

Risk-based approach is used for examination of impact of different factors on quality of medicinal products in technology transfer. A general diagram is offered for risk analysis execution in technology transfer from pharmaceutical development to production. When transferring technology to full- scale commercial production it is necessary to investigate and simulate production process application beforehand in new real conditions. The manufacturing process is the core factorfor risk analysis having the most impact on quality attributes of a medicinal product. Further importantfactors are linked to materials and products to be handled and manufacturing environmental conditions such as premises, equipment and personnel. Usage of risk-based approach in designing of multipurpose production facility of medicinal products is shown where quantitative risk analysis tool RAMM (Risk Analysis and Mitigation Matrix) was applied.

Solid-phase microextraction technology for in vitro and in vivo metabolite analysis

PubMed Central

Zhang, Qihui; Zhou, Liandi; Chen, Hua; Wang, Chong-Zhi; Xia, Zhining; Yuan, Chun-Su

2016-01-01

Analysis of endogenous metabolites in biological samples may lead to the identification of biomarkers in metabolomics studies. To achieve accurate sample analysis, a combined method of continuous quick sampling and extraction is required for online compound detection. Solid-phase microextraction (SPME) integrates sampling, extraction and concentration into a single solvent-free step for chemical analysis. SPME has a number of advantages, including simplicity, high sensitivity and a relatively non-invasive nature. In this article, we reviewed SPME technology in in vitro and in vivo analyses of metabolites after the ingestion of herbal medicines, foods and pharmaceutical agents. The metabolites of microorganisms in dietary supplements and in the gastrointestinal tract will also be examined. As a promising technology in biomedical and pharmaceutical research, SPME and its future applications will depend on advances in analytical technologies and material science. PMID:27695152

Identifying Multimedia Production Competencies and Skills of Instructional Design and Technology Professionals: An Analysis of Recent Job Postings

ERIC Educational Resources Information Center

Sugar, William; Hoard, Brent; Brown, Abbie; Daniels, Lee

2012-01-01

In an effort to document necessary multimedia production competencies of Instructional Design and Technology graduates, a recent analysis of over 7 months' worth of Instructional Design and Technology job advertisements (n = 615) were conducted. Specific job skills from these postings were categorized and analyzed. The data set includes three job…

Post LANDSAT D Advanced Concept Evaluation (PLACE). [with emphasis on mission planning, technological forecasting, and user requirements

NASA Technical Reports Server (NTRS)

1977-01-01

An outline is given of the mission objectives and requirements, system elements, system concepts, technology requirements and forecasting, and priority analysis for LANDSAT D. User requirements and mission analysis and technological forecasting are emphasized. Mission areas considered include agriculture, range management, forestry, geology, land use, water resources, environmental quality, and disaster assessment.

Information Communication Technology and Politics: A Synthesized Analysis of the Impacts of Information Technology on Voter Participation in Kenya

ERIC Educational Resources Information Center

Tsuma, Clive Katiba

2011-01-01

The availability of political information throughout society made possible by the evolution of contemporary information communication technology has precipitated conflicting debate regarding the effects of technology use on real life political participation. Proponents of technology argue that the use of new information technology stimulates…

Social and ethical analysis in health technology assessment.

PubMed

Tantivess, Sripen

2014-05-01

This paper presents a review of the domestic and international literature on the assessment of the social and ethical implications of health technologies. It gives an overview of the key concepts, principles, and approaches that should be taken into account when conducting a social and ethical analysis within health technology assessment (HTA). Although there is growing consensus among healthcare experts that the social and ethical ramifications of a given technology should be examined before its adoption, the demand for this kind of analysis among policy-makers around the world, including in Thailand, has so far been lacking. Currently decision-makers mainly base technology adoption decisions using evidence on clinical effectiveness, value for money, and budget impact, while social and ethical aspects have been neglected. Despite the recognized importance of considering equity, justice, and social issues when making decisions regarding health resource allocation, the absence of internationally-accepted principles and methodologies, among other factors, hinders research in these areas. Given that developing internationally agreed standards takes time, it has been recommended that priority be given to defining processes that are justifiable, transparent, and contestable. A discussion of the current situation in Thailand concerning social and ethical analysis of health technologies is also presented.

Cost-effectiveness analysis: problems and promise for evaluating medical technology

NASA Astrophysics Data System (ADS)

Juday, Timothy R.

1994-12-01

Although using limited financial resources in the most beneficial way, in principle, a laudable goal, actually developing standards for measuring the cost-effectiveness of medical technologies and incorporating them into the coverage process is a much more difficult proposition. Important methodological difficulties include determining how to compare a technology to its leading alternative, defining costs, incorporating patient preferences, and defining health outcomes. In addition, more practical questions must be addressed. These questions include: who does the analysis? who makes the decisions? which technologies to evaluate? what resources are required? what is the political and legal environment? how much is a health outcome worth? The ultimate question that must be answered is what is a health outcome worth? Cost-effectiveness analysis cannot answer this question; it only enables comparison of cost-effectiveness ratios across technologies. In order to determine whether a technology should be covered, society or individual insurers must determine how much they are willing to pay for the health benefits. Conducting cost-effectiveness analysis will not remove the need to make difficult resource allocation decisions; however, explicitly examining the tradeoffs involved in these decisions should help to improve the process.

The Current State of Human Performance Technology: A Citation Network Analysis of "Performance Improvement Quarterly," 1988-2010

ERIC Educational Resources Information Center

Cho, Yonjoo; Jo, Sung Jun; Park, Sunyoung; Kang, Ingu; Chen, Zengguan

2011-01-01

This study conducted a citation network analysis (CNA) of human performance technology (HPT) to examine its current state of the field. Previous reviews of the field have used traditional research methods, such as content analysis, survey, Delphi, and citation analysis. The distinctive features of CNA come from using a social network analysis…

SUPERFUND INNOVATIVE TECHNOLOGIES EVALUATION ...

EPA Pesticide Factsheets

This task seeks to identify high priority needs of the Regions and Program Offices for innovative field sampling, characterization, monitoring, and measurement technologies. When an appropriate solution to a specific problem is identified, a field demonstration is conducted to document the performance and cost of the proposed technologies. The use of field analysis almost always provides a savings in time and cost over the usual sample and ship to a conventional laboratory for analysis approach to site characterization and monitoring. With improvements in technology and appropriate quality assurance/quality control, field analysis has been shown to provide high quality data, useful for most environmental monitoring or characterization projects. An emphasis of the program is to seek out innovative solutions to existing problems and to provide the cost and performance data a user would require to make an informed decision regarding the adequacy of a technology to address a specific environmental problem. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

Technological innovation capability in Malaysian-owned resource-based manufacturing companies: Early findings

NASA Astrophysics Data System (ADS)

Razali, Nur Fhathyhah; Mohd Suradi, Nur Riza; Ahmad Shahabuddin, Faridatul Azna; Ismail, Wan Rosmanira; Abidin, Norkisme Zainal; Ahmad, Nor Amalina; Mustafa, Zainol

2013-04-01

This study aims to identify the determinants of technological innovation capability of Malaysian-owned companies in the resources-based manufacturing, to identify the relationship between technological innovation capability (TIC) and technological innovation performance (TIP) for the resource-based manufacturing. Furthermore, this study also aims to identify innovation capability factors that need more emphasis and improvements from the respective authority. The scope of the study covers four industries which are petrochemical industries, pharmaceutical industries, palm oil-based industries and food processing industries which are located in the state of Selangor. Descriptive analysis, correlation analysis and performance capability analysis were used in this study. It was found that, technological innovation capabilities (TIC) for companies in the resource-based manufacturing are moderate. Factors such as policies capability, human resources capability and facilities capability have a positive relationship with the performance of technological innovation (TIP). These findings will help the government in making decisions and better implementation of policies to strengthen the competitiveness of the company, particularly in resource-based manufacturing.

Research Infrastructure for Collaborative Team Science: Challenges in Technology-Supported Workflows in and Across Laboratories, Institutions, and Geographies.

PubMed

Mirel, Barbara; Luo, Airong; Harris, Marcelline

2015-05-01

Collaborative research has many challenges. One under-researched challenge is how to align collaborators' research practices and evolving analytical reasoning with technologies and configurations of technologies that best support them. The goal of such alignment is to enhance collaborative problem solving capabilities in research. Toward this end, we draw on our own research and a synthesis of the literature to characterize the workflow of collaborating scientists in systems-level renal disease research. We describe the various phases of a hypothetical workflow among diverse collaborators within and across laboratories, extending from their primary analysis through secondary analysis. For each phase, we highlight required technology supports, and. At time, complementary organizational supports. This survey of supports matching collaborators' analysis practices and needs in research projects to technological support is preliminary, aimed ultimately at developing a research capability framework that can help scientists and technologists mutually understand workflows and technologies that can help enable and enhance them. Copyright © 2015 Elsevier Inc. All rights reserved.

Information Technology: A Community of Practice. A Workplace Analysis

ERIC Educational Resources Information Center

Guerrero, Tony

2014-01-01

Information Technology (IT) encompasses all aspects of computing technology. IT is concerned with issues relating to supporting technology users and meeting their needs within an organizational and societal context through the selection, creation, application, integration, and administration of computing technologies (Lunt, et. al., 2008). The…

Report on Community College Industrial Production Technology Programs.

ERIC Educational Resources Information Center

Illinois Community Coll. Board, Springfield.

This report provides an in-depth analysis of the Industrial Production Technology Programs in Illinois, which, according to Illinois Community College Board policy, must be reviewed at least once every five years. The disciplines included in this report are: industrial manufacturing technology, corrosion technology, plastics technology, and…

Analysis of Engineering Content within Technology Education Programs

ERIC Educational Resources Information Center

Fantz, Todd D.; Katsioloudis, Petros J.

2011-01-01

In order to effectively teach engineering, technology teachers need to be taught engineering content, concepts, and related pedagogy. Some researchers posit that technology education programs may not have enough content to prepare technology teachers to teach engineering design. Certain technology teacher education programs have responded by…

On School Educational Technology Leadership

ERIC Educational Resources Information Center

Davies, Patricia M.

2010-01-01

This analysis of the literatures on school educational technology leadership addresses definitions of school technology leaders and leadership, their role in educational change, and why schools are now changing as a result of 21st century advancements in technology. The literatures disagree over the definition of educational technology leadership.…

Technology Facilitation in the Rural School: An Analysis of Options.

ERIC Educational Resources Information Center

Hawkes, Mark; Halverson, Pamela; Brockmueller, Bradley

2002-01-01

A study examining technology support in rural schools surveyed 129 school technology coordinators in four upper plains states. Heavy pedagogical and technical demands were placed on rural technology coordinators. Rural technology coordinators should have teaching experience and advanced degree work in network administration, computer hardware…

75 FR 18484 - Emerging Technology and Research Advisory Committee; Notice of Open Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-12

... Emerging Technologies Analysis. 2. ETRAC Panel on Emerging Technologies. 3. History of the Laser. 4... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Open Meeting The Emerging Technology and Research Advisory Committee (ETRAC) [[Page...

APPLICATIONS ANALYSIS REPORT: CHEMFIX TECHNOLOGIES, INC. - SOLIDIFICATION/STABILIZATION PROCESS

EPA Science Inventory

In support of the U.S. Environmental Protection Agency's (EPA) Superfund Innovative Technology Evaluation (SITE) Program, this report evaluates the Chemfix Technologies, Inc. (Chemfix), solidification/stabilization technology for on-site treatment of hazardous waste. The Chemfix ...

Solar Market Research and Analysis | Solar Research | NREL

Science.gov Websites

stakeholder engagement, NREL's Solar Market Research and Analysis efforts further solar technologies' role in technologies' role in supporting a more efficient and better performing U.S. electricity system. Learn more

The CICT Earth Science Systems Analysis Model

NASA Technical Reports Server (NTRS)

Pell, Barney; Coughlan, Joe; Biegel, Bryan; Stevens, Ken; Hansson, Othar; Hayes, Jordan

2004-01-01

Contents include the following: Computing Information and Communications Technology (CICT) Systems Analysis. Our modeling approach: a 3-part schematic investment model of technology change, impact assessment and prioritization. A whirlwind tour of our model. Lessons learned.

Economic Impact of Large-Scale Deployment of Offshore Marine and Hydrokinetic Technology in Oregon Coastal Counties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jimenez, T.; Tegen, S.; Beiter, P.

To begin understanding the potential economic impacts of large-scale WEC technology, the Bureau of Ocean Energy Management (BOEM) commissioned the National Renewable Energy Laboratory (NREL) to conduct an economic impact analysis of largescale WEC deployment for Oregon coastal counties. This report follows a previously published report by BOEM and NREL on the jobs and economic impacts of WEC technology for the entire state (Jimenez and Tegen 2015). As in Jimenez and Tegen (2015), this analysis examined two deployment scenarios in the 2026-2045 timeframe: the first scenario assumed 13,000 megawatts (MW) of WEC technology deployed during the analysis period, and themore » second assumed 18,000 MW of WEC technology deployed by 2045. Both scenarios require major technology and cost improvements in the WEC devices. The study is on very large-scale deployment so readers can examine and discuss the potential of a successful and very large WEC industry. The 13,000-MW is used as the basis for the county analysis as it is the smaller of the two scenarios. Sensitivity studies examined the effects of a robust in-state WEC supply chain. The region of analysis is comprised of the seven coastal counties in Oregon—Clatsop, Coos, Curry, Douglas, Lane, Lincoln, and Tillamook—so estimates of jobs and other economic impacts are specific to this coastal county area.« less

USAF solar thermal applications overview

NASA Technical Reports Server (NTRS)

Hauger, J. S.; Simpson, J. A.

1981-01-01

Process heat applications were compared to solar thermal technologies. The generic process heat applications were analyzed for solar thermal technology utilization, using SERI's PROSYS/ECONOMAT model in an end use matching analysis and a separate analysis was made for solar ponds. Solar technologies appear attractive in a large number of applications. Low temperature applications at sites with high insolation and high fuel costs were found to be most attractive. No one solar thermal technology emerges as a clearly universal or preferred technology, however,, solar ponds offer a potential high payoff in a few, selected applications. It was shown that troughs and flat plate systems are cost effective in a large number of applications.

Methods and Technologies Branch (MTB)

Cancer.gov

The Methods and Technologies Branch focuses on methods to address epidemiologic data collection, study design and analysis, and to modify technological approaches to better understand cancer susceptibility.

Using Cluster Analysis for Data Mining in Educational Technology Research

ERIC Educational Resources Information Center

Antonenko, Pavlo D.; Toy, Serkan; Niederhauser, Dale S.

2012-01-01

Cluster analysis is a group of statistical methods that has great potential for analyzing the vast amounts of web server-log data to understand student learning from hyperlinked information resources. In this methodological paper we provide an introduction to cluster analysis for educational technology researchers and illustrate its use through…

A Synthetic Vision Preliminary Integrated Safety Analysis

NASA Technical Reports Server (NTRS)

Hemm, Robert; Houser, Scott

2001-01-01

This report documents efforts to analyze a sample of aviation safety programs, using the LMI-developed integrated safety analysis tool to determine the change in system risk resulting from Aviation Safety Program (AvSP) technology implementation. Specifically, we have worked to modify existing system safety tools to address the safety impact of synthetic vision (SV) technology. Safety metrics include reliability, availability, and resultant hazard. This analysis of SV technology is intended to be part of a larger effort to develop a model that is capable of "providing further support to the product design and development team as additional information becomes available". The reliability analysis portion of the effort is complete and is fully documented in this report. The simulation analysis is still underway; it will be documented in a subsequent report. The specific goal of this effort is to apply the integrated safety analysis to SV technology. This report also contains a brief discussion of data necessary to expand the human performance capability of the model, as well as a discussion of human behavior and its implications for system risk assessment in this modeling environment.

Exploring the Relationship between Access Technology and Standardized Test Scores for Youths with Visual Impairments: Secondary Analysis of the National Longitudinal Transition Study 2

ERIC Educational Resources Information Center

Freeland, Amy L.; Emerson, Robert Wall; Curtis, Amy B.; Fogarty, Kieran

2010-01-01

This article presents the findings of a secondary analysis of the National Longitudinal Transition Study 2 that explored the predictive association between training in access technology and performance on the Woodcock-Johnson Tests of Academic Achievement: III. The results indicated that the use of access technology had a limited predictive…

Survival Analysis of US Air Force Officer Retention Rate

DTIC Science & Technology

2017-03-23

Air Force Institute of Technology AFIT Scholar Theses and Dissertations 3-23-2017 Survival Analysis of US Air Force Officer Retention Rate Courtney N...AIR UNIVERSITY AIR FORCE INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force Base, Ohio DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE...to the Faculty Department of Operational Sciences Graduate School of Engineering and Management Air Force Institute of Technology Air University

Electric Propulsion Requirements and Mission Analysis Under NASA's In-Space Propulsion Technology Project

NASA Technical Reports Server (NTRS)

Dudzinski, Leonard a.; Pencil, Eric J.; Dankanich, John W.

2007-01-01

The In-Space Propulsion Technology Project (ISPT) is currently NASA's sole investment in electric propulsion technologies. This project is managed at NASA Glenn Research Center (GRC) for the NASA Headquarters Science Mission Directorate (SMD). The objective of the electric propulsion project area is to develop near-term and midterm electric propulsion technologies to enhance or enable future NASA science missions while minimizing risk and cost to the end user. Systems analysis activities sponsored by ISPT seek to identify future mission applications in order to quantify mission requirements, as well as develop analytical capability in order to facilitate greater understanding and application of electric propulsion and other propulsion technologies in the ISPT portfolio. These analyses guide technology investments by informing decisions and defining metrics for technology development to meet identified mission requirements. This paper discusses the missions currently being studied for electric propulsion by the ISPT project, and presents the results of recent electric propulsion (EP) mission trades. Recent ISPT systems analysis activities include: an initiative to standardize life qualification methods for various electric propulsion systems in order to retire perceived risk to proposed EP missions; mission analysis to identify EP requirements from Discovery, New Frontiers, and Flagship classes of missions; and an evaluation of system requirements for radioisotope-powered electric propulsion. Progress and early results of these activities is discussed where available.

Technology-Dependent Children: Hospital v. Home Care: A Technical Memorandum.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

This technical memorandum examines the problems of health care financing encountered by technology-dependent children. A working definition of technology dependence is provided and the prevalence of technology dependence among American children is estimated. Analysis shows that the population of technology-dependent children has increased in size…

An Analysis of the Relationship between Professional Development, School Leadership, Technology Infrastructure, and Technology Use

ERIC Educational Resources Information Center

Mishnick, Nicole

2017-01-01

This dissertation study investigates the relationship between professional development, school leadership, technology infrastructure and technology use. Three research questions were developed. The first examines the relationship between professional development and technology use, the second examines the relationship between school leadership and…

Some historical relationships between science and technology with implications for behavior analysis

PubMed Central

Moxley, Roy A.

1989-01-01

The relationship between science and technology is examined in terms of some implications for behavior analysis. Problems result when this relationship is seen as one in which science generally begets technology in a one-way, or hierarchical, relationship. These problems are not found when the relationship between science and technology is seen as two-way, or symmetrical, within a larger context of relationships. Some historical examples are presented. Collectively, these and other examples in the references weaken the case for a prevailing one-way, hierarchical relationship and strengthen the case for a two-way, symmetrical relationship. In addition to being more accurate historically, the symmetrical relationship is also more consistent with the principles of behavior analysis. PMID:22478016

Environmental Control and Life Support Systems technology options for Space Station application

NASA Technical Reports Server (NTRS)

Hall, J. B., Jr.; Ferebee, M. J., Jr.; Sage, K. H.

1985-01-01

Continuous assessments regarding the suitability of candidate technologies for manned Space Stations will be needed over the next several years to obtain a basis for recommending the optimum system for an Initial Operating Capability (IOC) Space Station which is to be launched in the early 1990's. This paper has the objective to present analysis programs, the candidate recommendations, and the recommended approach for integration these candidates into the NASA Space Station reference configuration. Attention is given to ECLSS (Environmental Control and Life Support System) technology assessment program, an analysis approach for candidate technology recommendations, mission model variables, a candidate integration program, metabolic oxygen recovery, urine/flush water and all waste water recovery, wash water and condensate water recovery, and an integration analysis.

Completed | Office of Cancer Clinical Proteomics Research

Cancer.gov

Prior to the current Clinical Proteomic Tumor Analysis Consortium (CPTAC), previously funded initiatives associated with clinical proteomics research included: Clinical Proteomic Tumor Analysis Consortium (CPTAC 2.0) Clinical Proteomic Technologies for Cancer Initiative (CPTC) Mouse Proteomic Technologies Initiative

Tracking the use of onboard safety technologies across the truck fleet.

DOT National Transportation Integrated Search

2009-03-01

The Transportation Safety Analysis and the Automotive Analysis Divisons at the University of Michigan Transportation Research Institute (UMTRI) initiated the Onboard Safety Technologies project in 2007, supported by FMCSA, to collect detailed informa...

Arthropod surveillance programs: Basic components, strategies, and analysis

USDA-ARS?s Scientific Manuscript database

Effective entomological surveillance planning stresses a careful consideration of methodology, trapping technologies, and analysis techniques. Herein, the basic principles and technological components of arthropod surveillance plans are described, as promoted in the symposium “Advancements in arthro...

The multi-level perspective analysis: Indonesia geothermal energy transition study

NASA Astrophysics Data System (ADS)

Wisaksono, A.; Murphy, J.; Sharp, J. H.; Younger, P. L.

2018-01-01

The study adopts a multi-level perspective in technology transition to analyse how the transition process in the development of geothermal energy in Indonesia is able to compete against the incumbent fossil-fuelled energy sources. Three levels of multi-level perspective are socio-technical landscape (ST-landscape), socio-technical regime (ST-regime) and niche innovations in Indonesia geothermal development. The identification, mapping and analysis of the dynamic relationship between each level are the important pillars of the multi-level perspective framework. The analysis considers the set of rules, actors and controversies that may arise in the technological transition process. The identified geothermal resource risks are the basis of the emerging geothermal technological innovations in Indonesian geothermal. The analysis of this study reveals the transition pathway, which yields a forecast for the Indonesian geothermal technology transition in the form of scenarios and probable impacts.

Benchmarks of Global Clean Energy Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandor, Debra; Chung, Donald; Keyser, David

The Clean Energy Manufacturing Analysis Center (CEMAC), sponsored by the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Benchmarks of Global Clean Energy Manufacturing sheds light on several fundamental questions about the global clean technology manufacturing enterprise: How does clean energy technology manufacturing impact national economies? What are the economic opportunities across the manufacturing supply chain? What are the global dynamics of clean energy technology manufacturing?

Ultra Lightweight Ballutes for Return to Earth from the Moon

NASA Technical Reports Server (NTRS)

Masciarelli, James P.; Lin, John K. H.; Ware, Joanne S.; Rohrschneider, Reuben R.; Braun, Robert D.; Bartels, Robert E.; Moses, Robert W.; Hall, Jeffery L.

2006-01-01

Ultra lightweight ballutes offer revolutionary mass and cost benefits along with flexibility in flight system design compared to traditional entry system technologies. Under funding provided by NASA s Exploration Systems Research & Technology program, our team was able to make progress in developing this technology through systems analysis and design, evaluation of materials and construction methods, and development of critical analysis tools. Results show that once this technology is mature, significant launch mass savings, operational simplicity, and mission robustness will be available to help carry out NASA s Vision for Space Exploration.

Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Indirect Liquefaction, Fast Pyrolysis, and Hydrothermal Liquefaction: Update of the 2016 State-of-Technology Cases and Design Cases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Hao; Dunn, Jennifer; Pegallapati, Ambica

The Department of Energy’s (DOE) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts and biopower through public and private partnerships (DOE, 2016). BETO and its national laboratory teams conduct in-depth technoeconomic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels, and life-cycle analysis of overall system sustainability.

Using residents' worries about technology as a way of resolving environmental remediation dilemmas.

PubMed

Prior, Jason; Hubbard, Phil; Rai, Tapan

2017-02-15

The choice of technologies used to remediate contaminated environments are increasingly made via engagement with affected local residents. Despite this, little is known about how residents perceive remediation technology applications. Building on the findings of broader technology worry research, and drawing on data from a telephone survey of 2009 residents living near thirteen contaminated sites in Australia, regression analysis of closed-ended survey questions and coding analysis of open-ended survey questions are combined to identify the main predictors of worries concerning particular remediation technologies, and how worry affects them. This suggests respondents are more worried about the application of chemical remediation technologies than the application of physical and thermal technologies, which in turn caused more worry than the application of biotechnology. The paper suggests that these worries can be reduced via direct engagement with residents about remediation technologies, suggesting that such engagement can provide knowledge that improves remediation technology decisions. Copyright © 2016 Elsevier B.V. All rights reserved.

Utilization of Multimedia Laboratory: An Acceptance Analysis using TAM

NASA Astrophysics Data System (ADS)

Modeong, M.; Palilingan, V. R.

2018-02-01

Multimedia is often utilized by teachers to present a learning materials. Learning that delivered by multimedia enables people to understand the information of up to 60% of the learning in general. To applying the creative learning to the classroom, multimedia presentation needs a laboratory as a space that provides multimedia needs. This study aims to reveal the level of student acceptance on the multimedia laboratories, by explaining the direct and indirect effect of internal support and technology infrastructure. Technology Acceptance Model (TAM) is used as the basis of measurement on this research, through the perception of usefulness, ease of use, and the intention, it’s recognized capable of predicting user acceptance about technology. This study used the quantitative method. The data analysis using path analysis that focuses on trimming models, it’s performed to improve the model of path analysis structure by removing exogenous variables that have insignificant path coefficients. The result stated that Internal Support and Technology Infrastructure are well mediated by TAM variables to measure the level of technology acceptance. The implications suggest that TAM can measure the success of multimedia laboratory utilization in Faculty of Engineering UNIMA.

The Intellectual Structure of Research on Educational Technology in Science Education (ETiSE): A Co-citation Network Analysis of Publications in Selected Journals (2008-2013)

NASA Astrophysics Data System (ADS)

Tang, Kai-Yu; Tsai, Chin-Chung

2016-01-01

The main purpose of this paper is to investigate the intellectual structure of the research on educational technology in science education (ETiSE) within the most recent years (2008-2013). Based on the criteria for educational technology research and the citation threshold for educational co-citation analysis, a total of 137 relevant ETiSE papers were identified from the International Journal of Science Education, the Journal of Research in Science Teaching, Science Education, and the Journal of Science Education and Technology. Then, a series of methodologies were performed to analyze all 137 source documents, including document co-citation analysis, social network analysis, and exploratory factor analysis. As a result, 454 co-citation ties were obtained and then graphically visualized with an undirected network, presenting a global structure of the current ETiSE research network. In addition, four major underlying intellectual subfields within the main component of the ETiSE network were extracted and named as: (1) technology-enhanced science inquiry, (2) simulation and visualization for understanding, (3) technology-enhanced chemistry learning, and (4) game-based science learning. The most influential co-citation pairs and cross-boundary phenomena were then analyzed and visualized in a co-citation network. This is the very first attempt to illuminate the core ideas underlying ETiSE research by integrating the co-citation method, factor analysis, and the networking visualization technique. The findings of this study provide a platform for scholarly discussion of the dissemination and research trends within the current ETiSE literature.

Spacecraft Bus and Platform Technology Development under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Glaab, Louis; Peterson, Todd

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future direction for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions; and 3) electric propulsion for sample return and low cost missions. These technologies are more vehicle and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

Spacecraft Bus and Platform Technology Development under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric J.; Dankanich, John W.; Glaab, Louis J.; Peterson, Todd T.

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance 2) NASAs Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future direction for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV) 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions and 3) electric propulsion for sample return and low cost missions. These technologies are more vehicle and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

PubMed Central

DAMONTI, A.; MORELLI, P.; MUSSI, M.; PATREGNANI, C.; GARAGIOLA, E.; FOGLIA, E.; PAGANI, R.; CARMINATI, R.; PORAZZI, E.

2015-01-01

Summary Introduction. The objective of this paper is the comparison between two different technologies used for the removal of a uterine myoma, a frequent benign tumor: the standard technology currently used, laparoscopy, and an innovative one, colpoceliotomy. It was considered relevant to evaluate the real and the potential effects of the two technologies implementation and, in addition, the consequences that the introduction or exclusion of the innovative technology would have for both the National Health System (NHS) and the entire community. Methods. The comparison between these two different technologies, the standard and the innovative one, was conducted using a Health Technology Assessment (HTA). In particular, in order to analyse their differences, a multi-dimensional approach was considered: effectiveness, costs and budget impact analysis data were collected, applying different instruments, such as the Activity Based Costing methodology (ABC), the Cost-Effectiveness Analysis (CEA) and the Budget Impact Analysis (BIA). Organisational, equity and social impact were also evaluated. Results. The results showed that the introduction of colpoceliotomy would provide significant economic savings to the Regional and National Health Service; in particular, a saving of € 453.27 for each surgical procedure. Discussion. The introduction of the innovative technology, colpoceliotomy, could be considered a valuable tool; one offering many advantages related to less invasiveness and a shorter surgical procedure than the standard technology currently used (laparoscopy). PMID:26900330

APPLICATIONS ANALYSIS REPORT: AWD TECHNOLOGIES, INC AQUADETOX®/SVE TECHNOLOGY

EPA Science Inventory

In support of the U.S. Environmental Protection Agency’s (EPA) Superfund Innovative Technology Evaluation (SITE) Program, this report evaluates the AWD Technologies, Inc., integrated AquaDetox®/SVE treatment system for simultaneous on-site treatment of contaminated groundwater an...

Production cost analysis and use of pesticides in the transgenic and conventional corn crop [Zea mays (L.)] in the valley of San Juan, Tolima.

PubMed

Méndez, Kelly Avila; Chaparro Giraldo, Alejandro; Moreno, Giovanni Reyes; Castro, Carlos Silva

2011-01-01

A survey of 10 producers of conventional corn (Hybrids PAC 105 and Maximus) and 10 producers of transgenic corn (Pioneer Hybrid 30T17) was carried out in the municipality of Valle de San Juan in the territorial division of Tolima (Colombia), in order to analyze the differences in production costs and environmental impacts of these two agricultural technologies.  The environmental impacts were determined by calculating the field "Environmental Index Quotient" (EIQ). In the production cost analysis, a difference of 15% was found in benefit of the transgenic technology. The structure of costs of the transgenic technology was benefited by the reduced use of pesticides (insecticides and herbicides). In regards to production, the transgenic technology showed a greater yield, 5.22 ton/ha in comparison to 4.25 ton/ha the conventional technology, thus a 22% difference in yield. Finally, the EIQ calculation showed quantitative differences of 196.12 for the conventional technology (EIQ insecticides 165.14 + EIQ herbicides 30.98), while the transgenic technology was of 4.24 (EIQ insecticides 0 + EIQ herbicides 4.24). These results show a minor environmental impact when using the transgenic technology in comparison to the conventional technology, in regards to the use of insecticides and herbicides in a temporal, spatial and genotypical context analysis. :

Smart roadside initiative macro benefit analysis project report.

DOT National Transportation Integrated Search

2015-03-31

Through the Smart Roadside Initiative (SRI), a Benefit-Cost Analysis (BCA) tool was developed for the evaluation of various new transportation technologies at a State level and to provide results that could support technology adoption by a State Depa...

JUPITER PROJECT - MERGING INVERSE PROBLEM FORMULATION TECHNOLOGIES

EPA Science Inventory

The JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) project seeks to enhance and build on the technology and momentum behind two of the most popular sensitivity analysis, data assessment, calibration, and uncertainty analysis programs used in envi...

Technology Resource, Distribution, and Development Characteristics of Global Influenza Virus Vaccine: A Patent Bibliometric Analysis.

PubMed

Chen, Ning; Liu, Yun; Cheng, Yijie; Liu, Long; Yan, Zhe; Tao, Lixin; Guo, Xiuhua; Luo, Yanxia; Yan, Aoshuang

2015-01-01

Influenza virus vaccine (IVV) is a promising research domain that is closely related to global health matters, which has been acknowledged not only by scientists and technology developers, but also by policy-makers. Meanwhile, patents encompass valuable technological information and reflect the latest technological inventions as well as the innovative capability of a nation. However, little research has examined this up-and-coming research field using patent bibliometric method. Thus, this paper (a) designs the technology classification system and search strategy for the identification of IVV; and (b) presents a longitudinal analysis of the global IVV development based on the European Patent Office (EPO) patents. Bibliometric analysis is used to rank countries, institutions, inventors and technology subfields contributing to IVV technical progress. The results show that the global trends of IVV are a multi-developing feature of variety but an uneven technical resource distribution. Although the synthetic peptide vaccine is a comparatively young field, it already demonstrates the powerful vitality and the enormous development space. With the worldwide competition increasing, all nations especially China should be looking to increase devotion, enhance capability and regard effectiveness of technological innovation.

Content analysis to locate assistive technology in Queensland's motor injury insurance rehabilitation legislation and guidelines.

PubMed

Steel, Emily J

2018-06-08

Reforms to Australia's disability and rehabilitation sectors have espoused the potential of assistive technology as an enabler. As new insurance systems are being developed it is timely to examine the structure of existing systems. This exploratory study examined the policies guiding assistive technology provision in the motor accident insurance sector of one Australian state. Policy documents were analyzed iteratively with set of qualitative questions to understand the intent and interpretation of policies guiding assistive technology provision. Content analysis identified relevant sections and meaningful terminology, and context analysis explored the dominant perspectives informing policy. The concepts and language of assistive technology are not part of the policy frameworks guiding rehabilitation practice in Queensland's motor accident insurance sector. The definition of rehabilitation in the legislation is consistent contemporary international interpretations that focus on optimizing functioning in interaction with the environment. However, the supporting documents are focused on recovery from injuries where decisions are guided by clinical need and affordability. The policies frame rehabilitation in a medical model that assistive technology provision from the rehabilitation plan. The legislative framework provides opportunities to develop and improve assistive technology provision as part of an integrated approach to rehabilitation.

Technology Resource, Distribution, and Development Characteristics of Global Influenza Virus Vaccine: A Patent Bibliometric Analysis

PubMed Central

Liu, Long; Yan, Zhe; Tao, Lixin; Guo, Xiuhua; Luo, Yanxia; Yan, Aoshuang

2015-01-01

Influenza virus vaccine (IVV) is a promising research domain that is closely related to global health matters, which has been acknowledged not only by scientists and technology developers, but also by policy-makers. Meanwhile, patents encompass valuable technological information and reflect the latest technological inventions as well as the innovative capability of a nation. However, little research has examined this up-and-coming research field using patent bibliometric method. Thus, this paper (a) designs the technology classification system and search strategy for the identification of IVV; and (b) presents a longitudinal analysis of the global IVV development based on the European Patent Office (EPO) patents. Bibliometric analysis is used to rank countries, institutions, inventors and technology subfields contributing to IVV technical progress. The results show that the global trends of IVV are a multi-developing feature of variety but an uneven technical resource distribution. Although the synthetic peptide vaccine is a comparatively young field, it already demonstrates the powerful vitality and the enormous development space. With the worldwide competition increasing, all nations especially China should be looking to increase devotion, enhance capability and regard effectiveness of technological innovation. PMID:26372160

Assessment of Intelligent Tutoring Systems Technologies and Opportunities (Evaluation et opportunites des technologies des systemes de tutorat intelligents)

DTIC Science & Technology

2018-01-01

His research designs adaptive systems for online content, by integrating research in psychology and education, human- ANNEX A − INTELLIGENT TUTORING...related scientific activities that include systems engineering, operational research and analysis, synthesis, integration and validation of knowledge...System Analysis and Studies Panel • SCI Systems Concepts and Integration Panel • SET Sensors and Electronics Technology Panel These Panels and Group

Extending the Technological, Discursive, and Rhetorical Horizons of Academic Research Libraries' Information Architectures: An Analysis of North Carolina State University's James B. Hunt Jr. Library

ERIC Educational Resources Information Center

Carr, Patrick L.

2017-01-01

This dissertation analyzes how North Carolina State University's (NCSU) James B. Hunt Jr. Library extends the ways in which the information architectures of academic research libraries can function as a technology, as discourse, and as rhetoric. The starting point for the analysis is the libraries of antiquity, which functioned technologically as…

[The method and application to construct experience recommendation platform of acupuncture ancient books based on data mining technology].

PubMed

Chen, Chuyun; Hong, Jiaming; Zhou, Weilin; Lin, Guohua; Wang, Zhengfei; Zhang, Qufei; Lu, Cuina; Lu, Lihong

2017-07-12

To construct a knowledge platform of acupuncture ancient books based on data mining technology, and to provide retrieval service for users. The Oracle 10 g database was applied and JAVA was selected as development language; based on the standard library and ancient books database established by manual entry, a variety of data mining technologies, including word segmentation, speech tagging, dependency analysis, rule extraction, similarity calculation, ambiguity analysis, supervised classification technology were applied to achieve text automatic extraction of ancient books; in the last, through association mining and decision analysis, the comprehensive and intelligent analysis of disease and symptom, meridians, acupoints, rules of acupuncture and moxibustion in acupuncture ancient books were realized, and retrieval service was provided for users through structure of browser/server (B/S). The platform realized full-text retrieval, word frequency analysis and association analysis; when diseases or acupoints were searched, the frequencies of meridian, acupoints (diseases) and techniques were presented from high to low, meanwhile the support degree and confidence coefficient between disease and acupoints (special acupoint), acupoints and acupoints in prescription, disease or acupoints and technique were presented. The experience platform of acupuncture ancient books based on data mining technology could be used as a reference for selection of disease, meridian and acupoint in clinical treatment and education of acupuncture and moxibustion.

Using Citation Analysis Methods to Assess the Influence of Science, Technology, Engineering, and Mathematics Education Evaluations

ERIC Educational Resources Information Center

Greenseid, Lija O.; Lawrenz, Frances

2011-01-01

This study explores the use of citation analysis methods to assess the influence of program evaluations conducted within the area of science, technology, engineering, and mathematics (STEM) education. Citation analysis is widely used within scientific research communities to measure the relative influence of scientific research enterprises and/or…

Technology's Effect on Achievement in Higher Education: A Stage I Meta-Analysis of Classroom Applications

ERIC Educational Resources Information Center

Schmid, Richard F.; Bernard, Robert M.; Borokhovski, Eugene; Tamim, Rana; Abrami, Philip C.; Wade, C. Anne; Surkes, Michael A.; Lowerison, Gretchen

2009-01-01

This paper reports the findings of a Stage I meta-analysis exploring the achievement effects of computer-based technology use in higher education classrooms (non-distance education). An extensive literature search revealed more than 6,000 potentially relevant primary empirical studies. Analysis of a representative sample of 231 studies (k = 310)…

Impact of Technological and Structural Change on Employment: Prospective Analysis 2020. Background Report.

ERIC Educational Resources Information Center

Christidis, Panayotis, Ed.; Hernandez, Hector, Ed.; Lievonen, Jorma, Ed.

A study examined the role of technology in the European Union's (EU's) economy and its impacts on employment. Starting point was Technology and Employment Maps of the FUTURES project that identified main emerging technological developments (TDs) and their implications for employment. Technologies' potential impact on productivity growth and…

Growing Reading Fluency: Engaging Readers with Technology and Text

ERIC Educational Resources Information Center

Parenti, Melissa A.; Chen, Xiaojun

2015-01-01

The presence of technology in K-12 classrooms continues to increase. With the onset of these technological advances, a refined lens for analysis of the effectiveness of these tools is required. Web based tools necessitate a synthesis of Technological, Pedagogical and Content knowledge. Moreover, the use of technology should support the content and…

A Mathematics Teacher's Practice in a Technological Environment: A Case Study Analysis Using Two Complementary Theories

ERIC Educational Resources Information Center

Tabach, Michal

2011-01-01

Integrating technology in school mathematics has become more and more common. The teacher is a key person in integrating technology into everyday practice. To understand teacher practice in a technological environment, this study proposes using two theoretical perspectives: the theory of technological pedagogical content knowledge to analyze…

Value analysis for advanced technology products

NASA Astrophysics Data System (ADS)

Soulliere, Mark

2011-03-01

Technology by itself can be wondrous, but buyers of technology factor in the price they have to pay along with performance in their decisions. As a result, the ``best'' technology may not always win in the marketplace when ``good enough'' can be had at a lower price. Technology vendors often set pricing by ``cost plus margin,'' or by competitors' offerings. What if the product is new (or has yet to be invented)? Value pricing is a methodology to price products based on the value generated (e.g. money saved) by using one product vs. the next best technical alternative. Value analysis can often clarify what product attributes generate the most value. It can also assist in identifying market forces outside of the control of the technology vendor that also influence pricing. These principles are illustrated with examples.

[Technology in nursing care: an analysis from the conceptual framework of Fundamental Nursing].

PubMed

da Silva, Rafael Celestino; Ferreira, Márcia de Assunção

2014-01-01

This is a qualitative, field research, whose purpose was to discuss the use of technologies in the nursing care in intensive therapy, taking as reference the theoretical conceptual framework of Fundamental Nursing. Observation and interviews were conducted with twenty two nurses of an intensive therapy unit, with ethnographic analysis. The technology, from the domain of a technological language, provides conditions so that the fundamentals of the nursing care can be effectively incorporated to the nurse practice. The idea of dehumanization linked to the technology can be explained by the way that the nurse ads sense to the things related to his daily life, which will guide his action. The conclusion is that the technologies help to promote life and to rescue the human.

Analysis of Impact of 3D Printing Technology on Traditional Manufacturing Technology

NASA Astrophysics Data System (ADS)

Wu, Niyan; Chen, Qi; Liao, Linzhi; Wang, Xin

With quiet rise of 3D printing technology in automobile, aerospace, industry, medical treatment and other fields, many insiders hold different opinions on its development. This paper objectively analyzes impact of 3D printing technology on mold making technology and puts forward the idea of fusion and complementation of 3D printing technology and mold making technology through comparing advantages and disadvantages of 3D printing mold and traditional mold making technology.

A Meta-analysis Method to Advance Design of Technology-Based Learning Tool: Combining Qualitative and Quantitative Research to Understand Learning in Relation to Different Technology Features

NASA Astrophysics Data System (ADS)

Zhang, Lin

2014-02-01

Educators design and create various technology tools to scaffold students' learning. As more and more technology designs are incorporated into learning, growing attention has been paid to the study of technology-based learning tool. This paper discusses the emerging issues, such as how can learning effectiveness be understood in relation to different technology features? And how can pieces of qualitative and quantitative results be integrated to achieve a broader understanding of technology designs? To address these issues, this paper proposes a meta-analysis method. Detailed explanations about the structure of the methodology and its scientific mechanism are provided for discussions and suggestions. This paper ends with an in-depth discussion on the concerns and questions that educational researchers might raise, such as how this methodology takes care of learning contexts.

Performance, Cost, and Market Share of Conventional Vehicle Efficiency Technologies? Retrospective Comparison of Regulatory Document Projections for Corporate Average Fuel Economy and Greenhouse Gas Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Fei; Lin, Zhenhong; Nealer, Rachael

This paper conducted an analysis of regulatory documents on current energy- and greenhouse gas–relevant conventional vehicle efficiency technologies in the corporate average fuel economy standards (2017 to 2025) and greenhouse gas rulemaking context by NHTSA and EPA. The focus was on identifying what technologies today—as estimated now (2015 to 2016)—receive higher or lower expectations with regard to effectiveness, cost, and consumer adoption than what experts projected during the 2010 to 2011 rulemaking period. A broad range of conventional vehicle efficiency technologies, including gasoline engine and diesel engine, transmission, accessory, hybrid, and vehicle body technologies, was investigated in this analysis. Finally,more » most assessed technologies were found to have had better competitiveness than expected with regard to effectiveness or costs, or both, with costs and market penetration more difficult to predict than technology effectiveness.« less

Development and validation of the computer technology literacy self-assessment scale for Taiwanese elementary school students.

PubMed

Chang, Chiung-Sui

2008-01-01

The purpose of this study was to describe the development and validation of an instrument to identify various dimensions of the computer technology literacy self-assessment scale (CTLS) for elementary school students. The instrument included five CTLS dimensions (subscales): the technology operation skills, the computer usages concepts, the attitudes toward computer technology, the learning with technology, and the Internet operation skills. Participants were 1,539 elementary school students in Taiwan. Data analysis indicated that the instrument developed in the study had satisfactory validity and reliability. Correlations analysis supported the legitimacy of using multiple dimensions in representing students' computer technology literacy. Significant differences were found between male and female students, and between grades on some CTLS dimensions. Suggestions are made for use of the instrument to examine complicated interplays between students' computer behaviors and their computer technology literacy.

Performance, Cost, and Market Share of Conventional Vehicle Efficiency Technologies? Retrospective Comparison of Regulatory Document Projections for Corporate Average Fuel Economy and Greenhouse Gas Standards

DOE PAGES

Xie, Fei; Lin, Zhenhong; Nealer, Rachael

2017-09-30

This paper conducted an analysis of regulatory documents on current energy- and greenhouse gas–relevant conventional vehicle efficiency technologies in the corporate average fuel economy standards (2017 to 2025) and greenhouse gas rulemaking context by NHTSA and EPA. The focus was on identifying what technologies today—as estimated now (2015 to 2016)—receive higher or lower expectations with regard to effectiveness, cost, and consumer adoption than what experts projected during the 2010 to 2011 rulemaking period. A broad range of conventional vehicle efficiency technologies, including gasoline engine and diesel engine, transmission, accessory, hybrid, and vehicle body technologies, was investigated in this analysis. Finally,more » most assessed technologies were found to have had better competitiveness than expected with regard to effectiveness or costs, or both, with costs and market penetration more difficult to predict than technology effectiveness.« less

Innovative technology-based interventions for autism spectrum disorders: a meta-analysis.

PubMed

Grynszpan, Ouriel; Weiss, Patrice L Tamar; Perez-Diaz, Fernando; Gal, Eynat

2014-05-01

This article reports the results of a meta-analysis of technology-based intervention studies for children with autism spectrum disorders. We conducted a systematic review of research that used a pre-post design to assess innovative technology interventions, including computer programs, virtual reality, and robotics. The selected studies provided interventions via a desktop computer, interactive DVD, shared active surface, and virtual reality. None employed robotics. The results provide evidence for the overall effectiveness of technology-based training. The overall mean effect size for posttests of controlled studies of children with autism spectrum disorders who received technology-based interventions was significantly different from zero and approached the medium magnitude, d = 0.47 (confidence interval: 0.08-0.86). The influence of age and IQ was not significant. Differences in training procedures are discussed in the light of the negative correlation that was found between the intervention durations and the studies' effect sizes. The results of this meta-analysis provide support for the continuing development, evaluation, and clinical usage of technology-based intervention for individuals with autism spectrum disorders.

Basics of image analysis

USDA-ARS?s Scientific Manuscript database

Hyperspectral imaging technology has emerged as a powerful tool for quality and safety inspection of food and agricultural products and in precision agriculture over the past decade. Image analysis is a critical step in implementing hyperspectral imaging technology; it is aimed to improve the qualit...

Technology Assessment and Policy Analysis

ERIC Educational Resources Information Center

Majone, Giandomenico

1977-01-01

Argues that the application of policy analysis to technology assessment requires the abandonment of stereotyped approaches and a reformulation of analytical paradigms to include consideration of institutional constraints. Available from: Elsevier Scientific Publishing Company, Box 211, Amsterdam, the Netherlands, single copies available.…

Propulsion Technology Lifecycle Operational Analysis

NASA Technical Reports Server (NTRS)

Robinson, John W.; Rhodes, Russell E.

2010-01-01

The paper presents the results of a focused effort performed by the members of the Space Propulsion Synergy Team (SPST) Functional Requirements Sub-team to develop propulsion data to support Advanced Technology Lifecycle Analysis System (ATLAS). This is a spreadsheet application to analyze the impact of technology decisions at a system-of-systems level. Results are summarized in an Excel workbook we call the Technology Tool Box (TTB). The TTB provides data for technology performance, operations, and programmatic parameters in the form of a library of technical information to support analysis tools and/or models. The lifecycle of technologies can be analyzed from this data and particularly useful for system operations involving long running missions. The propulsion technologies in this paper are listed against Chemical Rocket Engines in a Work Breakdown Structure (WBS) format. The overall effort involved establishing four elements: (1) A general purpose Functional System Breakdown Structure (FSBS). (2) Operational Requirements for Rocket Engines. (3) Technology Metric Values associated with Operating Systems (4) Work Breakdown Structure (WBS) of Chemical Rocket Engines The list of Chemical Rocket Engines identified in the WBS is by no means complete. It is planned to update the TTB with a more complete list of available Chemical Rocket Engines for United States (US) engines and add the Foreign rocket engines to the WBS which are available to NASA and the Aerospace Industry. The Operational Technology Metric Values were derived by the SPST Sub-team in the form of the TTB and establishes a database for users to help evaluate and establish the technology level of each Chemical Rocket Engine in the database. The Technology Metric Values will serve as a guide to help determine which rocket engine to invest technology money in for future development.

Rural energy survey and cost-effectiveness analysis of renewable-energy technologies for a Philippine Island community

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manibog, F.R.

1982-01-01

This study presents the methodology and results of: (1) a rural energy survey that was conducted in a Philippine island community; and (2) a cost-effectiveness analysis of selected conventional and renewable-energy technologies. The rural energy survey section compares different survey techniques and analyzes energy utilization by providing: (1) a breakdown of energy flows and use patterns; (2) information on energy prices, ownership patterns, social relations, and their effects in terms of differential access to energy sources; (3) per household and per capita consumption figures; and (4) a village energy-consumption table. Correlation analysis is used to determine if the stratified, independentmore » socio-economic variables are indicators for dependent energy variables. Results of the economic analysis indicate that renewable-energy technologies are already least-cost alternatives to diesel generation in the village case study. The sensitivity analysis also shows that these technologies remain the least-cost options even if their capital costs were underestimated. The findings of the study are useful to the current Philippine renewable-energy program in terms of providing: (1) information essential for determining end-users' priority energy needs and for improving technology choice and project design; and (2) justification for promoting auto-generation based on renewable energy sources as alternatives to diesel fuel.« less

Final Report: Hydrogen Production Pathways Cost Analysis (2013 – 2016)

DOE Office of Scientific and Technical Information (OSTI.GOV)

James, Brian David; DeSantis, Daniel Allan; Saur, Genevieve

This report summarizes work conducted under a three year Department of Energy (DOE) funded project to Strategic Analysis, Inc. (SA) to analyze multiple hydrogen (H 2) production technologies and project their corresponding levelized production cost of H 2. The analysis was conducted using the H2A Hydrogen Analysis Tool developed by the DOE and National Renewable Energy Laboratory (NREL). The project was led by SA but conducted in close collaboration with the NREL and Argonne National Laboratory (ANL). In-depth techno-economic analysis (TEA) of five different H 2 production methods was conducted. These TEAs developed projections for capital costs, fuel/feedstock usage, energymore » usage, indirect capital costs, land usage, labor requirements, and other parameters, for each H 2 production pathway, and use the resulting cost and system parameters as inputs into the H2A discounted cash flow model to project the production cost of H 2 ($/kgH 2). Five technologies were analyzed as part of the project and are summarized in this report: Proton Exchange Membrane technology (PEM), High temperature solid oxide electrolysis cell technology (SOEC), Dark fermentation of biomass for H 2 production, H 2 production via Monolithic Piston-Type Reactors with rapid swing reforming and regeneration reactions, and Reformer-Electrolyzer-Purifier (REP) technology developed by Fuel Cell Energy, Inc. (FCE).« less

Application of Microchip for Biomarker Analysis

NASA Astrophysics Data System (ADS)

Kataoka, Masatoshi; Yatsushiro, Shouki; Yamamura, Shouhei; Abe, Hiroko

Microchip technologies have received considerable attention, due to their competitive advantages, especially in regards to reduced sample and reagent consumption, analysis time, and easy operation. This approach has been successfully used to analyze DNA, amino acids, proteins, and carbohydrates. In the present study, we showed the potential of microchip technologies for the biomarker analysis, blood carbohydrate analysis on microchip electrophoresis, quantitative analysis of protein with antigen-antibody reaction on microchip, and the detection of malaria-infected erythrocyte with a cell microarray chip.

Identifying Potential Implications of Technologies on Military and Security Options

DTIC Science & Technology

2006-06-01

Technology Readiness Level (TRL) ratings. THE DISCUSSION Technology surprise occurs through the use of rapidly-emerging and disruptive technologies by...NATO RTB Systems Analysis and Studies Panel, Exploratory Team on the Impact of Disruptive Technologies The objectives of this task group (TG...Workshop on Emerging Disruptive Technologies and the Implications for Defence advanced the view that TTCP should examine the potential of emerging

Understanding Preservice Teachers' Technology Use through TPACK Framework

ERIC Educational Resources Information Center

Pamuk, S.

2012-01-01

This study discusses preservice teachers' achievement barriers to technology integration, using principles of technological pedagogical content knowledge (TPACK) as an evaluative framework. Technology-capable participants each freely chose a content area to comprise project. Data analysis based on interactions among core components of TPACK…

Innovative eLearning: Technology Shaping Contemporary Problem Based Learning: A Cross-Case Analysis

ERIC Educational Resources Information Center

Blackburn, Greg

2015-01-01

Preparing students to be critical thinkers and effective communicators is essential in today's multinational and technologically sophisticated environment. New electronic technologies provide opportunities for creating learning environments that extend the possibilities of "old" but still essential technologies: books, blackboards, and…

Sounding Out Science: Incorporating Audio Technology to Assist Students with Learning Differences in Science Education

NASA Astrophysics Data System (ADS)

Gomes, Clement V.

With the current focus to have all students reach scientific literacy in the U.S, there exists a need to support marginalized students, such as those with Learning Disabilities/Differences (LD), to reach the same educational goals as their mainstream counterparts. This dissertation examines the benefits of using audio assistive technology on the iPad to support LD students to achieve comprehension of science vocabulary and semantics. This dissertation is composed of two papers, both of which include qualitative information supported by quantified data. The first paper, titled Using Technology to Overcome Fundamental Literacy Constraints for Students with Learning Differences to Achieve Scientific Literacy, provides quantified evidence from pretest and posttest analysis that audio technology can be beneficial for seventh grade LD students when learning new and unfamiliar science content. Analysis of observations and student interviews support the findings. The second paper, titled Time, Energy, and Motivation: Utilizing Technology to Ease Science Understanding for Students with Learning Differences, supports the importance of creating technology that is clear, audible, and easy for students to use so they benefit and desire to utilize the learning tool. Multiple correlation of Likert Survey analysis was used to identify four major items and was supported with analysis from observations of and interviews with students, parents, and educators. This study provides useful information to support the rising number of identified LD students and their parents and teachers by presenting the benefits of using audio assistive technology to learn science.

Cost benefit analysis of space communications technology: Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Holland, L. D.; Sassone, P. G.; Gallagher, J. J.; Robinette, S. L.; Vogler, F. H.; Zimmer, R. P.

1976-01-01

The questions of (1) whether or not NASA should support the further development of space communications technology, and, if so, (2) which technology's support should be given the highest priority are addressed. Insofar as the issues deal principally with resource allocation, an economics perspective is adopted. The resultant cost benefit methodology utilizes the net present value concept in three distinct analysis stages to evaluate and rank those technologies which pass a qualification test based upon probable (private sector) market failure. User-preference and technology state-of-the-art surveys were conducted (in 1975) to form a data base for the technology evaluation. The program encompassed near-future technologies in space communications earth stations and satellites, including the noncommunication subsystems of the satellite (station keeping, electrical power system, etc.). Results of the research program include confirmation of the applicability of the methodology as well as a list of space communications technologies ranked according to the estimated net present value of their support (development) by NASA.

Role of technology in the cost of health care: is there a conflict between improved health delivery and lowering costs?

NASA Astrophysics Data System (ADS)

Young, Donald A.

1994-12-01

Technology is a major contributor to both medical price inflation and increased utilization and intensity. While attention is frequently focused on the cost of new technology, the continued diffusion and utilization of existing technologies may be a more important contributor to cost escalation. An annual analysis done by the Prospective Payment Assessment Commission has demonstrated that the added costs of quality of care enhancing new technology and scientific advances adds only about half of one percent each year to the cost furnishing inpatient hospital care to Medicare beneficiaries. In addition, many of the technologies included in this analysis are not entirely new, but have been available for a number of years. The utilization of these technologies, such as MRI, thrombolytic therapy, and implantable defibrillators, continues to increase each year, adding to the growth of spending. Other well established technologies, such as CAT scanning, diagnostic ultrasound, radiation therapy, and cardiac catheterization, also continue to diffuse, with annual increases in utilization.

How cutting-edge technologies impact the design of electrochemical (bio)sensors for environmental analysis. A review.

PubMed

Arduini, Fabiana; Cinti, Stefano; Scognamiglio, Viviana; Moscone, Danila; Palleschi, Giuseppe

2017-03-22

Through the years, scientists have developed cutting-edge technologies to make (bio)sensors more convenient for environmental analytical purposes. Technological advancements in the fields of material science, rational design, microfluidics, and sensor printing, have radically shaped biosensor technology, which is even more evident in the continuous development of sensing systems for the monitoring of hazardous chemicals. These efforts will be crucial in solving some of the problems constraining biosensors to reach real environmental applications, such as continuous analyses in field by means of multi-analyte portable devices. This review (with 203 refs.) covers the progress between 2010 and 2015 in the field of technologies enabling biosensor applications in environmental analysis, including i) printing technology, ii) nanomaterial technology, iii) nanomotors, iv) biomimetic design, and (v) microfluidics. Next section describes futuristic cutting-edge technologies that are gaining momentum in recent years, which furnish highly innovative aspects to biosensing devices. Copyright © 2016 Elsevier B.V. All rights reserved.

A Probabilistic System Analysis of Intelligent Propulsion System Technologies

NASA Technical Reports Server (NTRS)

Tong, Michael T.

2007-01-01

NASA s Intelligent Propulsion System Technology (Propulsion 21) project focuses on developing adaptive technologies that will enable commercial gas turbine engines to produce fewer emissions and less noise while increasing reliability. It features adaptive technologies that have included active tip-clearance control for turbine and compressor, active combustion control, turbine aero-thermal and flow control, and enabling technologies such as sensors which are reliable at high operating temperatures and are minimally intrusive. A probabilistic system analysis is performed to evaluate the impact of these technologies on aircraft CO2 (directly proportional to fuel burn) and LTO (landing and takeoff) NO(x) reductions. A 300-passenger aircraft, with two 396-kN thrust (85,000-pound) engines is chosen for the study. The results show that NASA s Intelligent Propulsion System technologies have the potential to significantly reduce the CO2 and NO(x) emissions. The results are used to support informed decisionmaking on the development of the intelligent propulsion system technology portfolio for CO2 and NO(x) reductions.

Application of Artificial Intelligence technology to the analysis and synthesis of reliable software systems

NASA Technical Reports Server (NTRS)

Wild, Christian; Eckhardt, Dave

1987-01-01

The development of a methodology for the production of highly reliable software is one of the greatest challenges facing the computer industry. Meeting this challenge will undoubtably involve the integration of many technologies. This paper describes the use of Artificial Intelligence technologies in the automated analysis of the formal algebraic specifications of abstract data types. These technologies include symbolic execution of specifications using techniques of automated deduction and machine learning through the use of examples. On-going research into the role of knowledge representation and problem solving in the process of developing software is also discussed.

Technology and Research Requirements for Combating Human Trafficking: Enhancing Communication, Analysis, Reporting, and Information Sharing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kreyling, Sean J.; West, Curtis L.; Olson, Jarrod

2011-03-17

DHS’ Science & Technology Directorate directed PNNL to conduct an exploratory study on the domain of human trafficking in the Pacific Northwest in order to examine and identify technology and research requirements for enhancing communication, analysis, reporting, and information sharing – activities that directly support efforts to track, identify, deter, and prosecute human trafficking – including identification of potential national threats from smuggling and trafficking networks. This effort was conducted under the Knowledge Management Technologies Portfolio as part of the Integrated Federal, State, and Local/Regional Information Sharing (RISC) and Collaboration Program.

Passive Infrared Surveillance: New Methods of Analysis

DTIC Science & Technology

1979-09-24

f NRL Memorandum Report 4078 EOTPO Report 55 Passive Infrared Surveillance: New Methods of Analysis RICHARD A. STINBERG Electro- Optical Technology...Progrant Offtcw Management Information and Special Programs Organizallon September 24, 1979 KL I -r- ’I . ,3 ELECTRO- OPTICAL TECHNOLOGY PROGRAM OFFICE...by Dr.Joh M.Ma1a1u m ,J, I’ Head, Bleutro- Optical Technology Program Office SECURITY CLASSIPICATION Of THII4 PAGE (Wim"u Data Bille) REPORT

Assessment of Self-Efficacy in Systems Engineering as an Indicator of Competency Level Achievement

DTIC Science & Technology

2014-06-01

11  C.  RESEARCH ON SELF-EFFICACY IN INFORMATION TECHNOLOGY —A PARALLEL TO SYSTEMS ENGINEERING ......13  1.  Stakeholder Analysis...Expectancy value theory FA Factor analysis IT Information technology KSA Knowledge, skills, abilities MIS Management information systems NPS...item in particular reflected statistically significant pre- and post-survey results at p<.001, which was the student’s ability to pick a technology for

The Intellectual Structure of Research on Educational Technology in Science Education (ETiSE): A Co-Citation Network Analysis of Publications in Selected Journals (2008-2013)

ERIC Educational Resources Information Center

Tang, Kai-Yu; Tsai, Chin-Chung

2016-01-01

The main purpose of this paper is to investigate the intellectual structure of the research on educational technology in science education (ETiSE) within the most recent years (2008-2013). Based on the criteria for educational technology research and the citation threshold for educational co-citation analysis, a total of 137 relevant ETiSE papers…

Proposal and Justification for Establishing Strategic Technology Information Analysis Center.

DTIC Science & Technology

1981-12-04

decision to establish a Strategic Technology Information Analysis Center (STIAC). This Center would provide a mission-oriented focus for Strategic Technology...SECTION 1. INTRODUCTION This proposal provides the Defense Logistic Agency with the following critical data to assist them in making the decision on...time consuming for the strategic BID community to acquire. 1.2 EVOLVING NEED FOR STIAC The need for a STIAC has been surfacing along multiple paths

Rotorcraft Low Altitude IFR Benefit/Cost Analysis: Operations Analysis

DTIC Science & Technology

1991-12-01

Anoll Len D. Dzamba Linda J. LaBelle Randahl N. Lindgren Robert B. Newman Deborah J. Peisen Systems Control Technology , Inc. 1611 N. Kent Street, Suite...Lindgren, Robert B. Newman, Deborah J. Peisen 9. Performing Organization Name and Address 10. Work Unit No. (TRAIS) Systems Control Technology , Inc. 1611...headquarters of United Technology /Sikorsky to get them through this area. 5.7.3.3 Communications Coverage Corporate/executive operators were well satisfied

A Needs Analysis for Technology Integration Plan: Challenges and Needs of Teachers

ERIC Educational Resources Information Center

Vatanartiran, Sinem; Karadeniz, Sirin

2015-01-01

Lack of technology leadership and technology integration plans are important obstacles for using technology effectively in schools. We carried out a large-scale study to be able to design a technology integration plan for one of the pilot provinces that Fatih Project was initiated. The purpose of this research is to examine the perceived…

University Researchers Contributing to Technology Markets 1900-85. A Long-Term Analysis of Academic Patenting in Finland

ERIC Educational Resources Information Center

Kaataja, Sampsa

2011-01-01

Regardless of the increased interest in technological innovation in universities, relatively little is known about the technology developed by academic scientists. Long-term analyses of researchers' technological contribution are notably missing. This paper examines university-based technology in Finland during the period 1900-85. The focus is on…

Marketing technology in macroeconomics.

PubMed

Tamegawa, Kenichi

2012-01-01

In this paper, we incorporate a marketing technology into a dynamic stochastic general equilibrium model by assuming a matching friction for consumption. An improvement in matching can be interpreted as an increase in matching technology, which we call marketing technology because of similar properties. Using a simulation analysis, we confirm that a positive matching technology shock can increase output and consumption.

A Comparative Analysis of Point-of-View Modeling for Industrial and Technology Education Courses

ERIC Educational Resources Information Center

Katsioloudis, Petros J.; Fantz, Todd D.; Jones, Millie

2013-01-01

Enrollment in technology education at the college level has been declining, so it is becoming essential for technology teacher educators to investigate ways to increase the enrollment in their programs. Technology teacher educators are exploring the extent to which distance-learning technologies such as video modeling can be used by industrial and…

Gian Porro | NREL

Science.gov Websites

Technical Risk Analysis for the Geothermal Technologies ProgramPDF. Golden, CO: National Renewable Energy analysis and planning activities (PAE Hub) Research Interests Analytical support to Geothermal Technologies Program, including assessment of the competitiveness of geothermal electricity generation Investigation of

Toward a Technology of Derived Stimulus Relations: An Analysis of Articles Published in the "Journal of Applied Behavior Analysis," 1992-2009

ERIC Educational Resources Information Center

Rehfeldt, Ruth Anne

2011-01-01

Every article on stimulus equivalence or derived stimulus relations published in the "Journal of Applied Behavior Analysis" was evaluated in terms of characteristics that are relevant to the development of applied technologies: the type of participants, settings, procedure automated vs. tabletop), stimuli, and stimulus sensory modality; types of…

Cost-effectiveness Analysis for Technology Acquisition.

PubMed

Chakravarty, A; Naware, S S

2008-01-01

In a developing country with limited resources, it is important to utilize the total cost visibility approach over the entire life-cycle of the technology and then analyse alternative options for acquiring technology. The present study analysed cost-effectiveness of an "In-house" magnetic resonance imaging (MRI) scan facility of a large service hospital against outsourcing possibilities. Cost per unit scan was calculated by operating costing method and break-even volume was calculated. Then life-cycle cost analysis was performed to enable total cost visibility of the MRI scan in both "In-house" and "outsourcing of facility" configuration. Finally, cost-effectiveness analysis was performed to identify the more acceptable decision option. Total cost for performing unit MRI scan was found to be Rs 3,875 for scans without contrast and Rs 4,129 with contrast. On life-cycle cost analysis, net present value (NPV) of the "In-house" configuration was found to be Rs-(4,09,06,265) while that of "outsourcing of facility" configuration was Rs-(5,70,23,315). Subsequently, cost-effectiveness analysis across eight Figures of Merit showed the "In-house" facility to be the more acceptable option for the system. Every decision for acquiring high-end technology must be subjected to life-cycle cost analysis.

Spreadsheets for Analyzing and Optimizing Space Missions

NASA Technical Reports Server (NTRS)

Some, Raphael R.; Agrawal, Anil K.; Czikmantory, Akos J.; Weisbin, Charles R.; Hua, Hook; Neff, Jon M.; Cowdin, Mark A.; Lewis, Brian S.; Iroz, Juana; Ross, Rick

2009-01-01

XCALIBR (XML Capability Analysis LIBRary) is a set of Extensible Markup Language (XML) database and spreadsheet- based analysis software tools designed to assist in technology-return-on-investment analysis and optimization of technology portfolios pertaining to outer-space missions. XCALIBR is also being examined for use in planning, tracking, and documentation of projects. An XCALIBR database contains information on mission requirements and technological capabilities, which are related by use of an XML taxonomy. XCALIBR incorporates a standardized interface for exporting data and analysis templates to an Excel spreadsheet. Unique features of XCALIBR include the following: It is inherently hierarchical by virtue of its XML basis. The XML taxonomy codifies a comprehensive data structure and data dictionary that includes performance metrics for spacecraft, sensors, and spacecraft systems other than sensors. The taxonomy contains >700 nodes representing all levels, from system through subsystem to individual parts. All entries are searchable and machine readable. There is an intuitive Web-based user interface. The software automatically matches technologies to mission requirements. The software automatically generates, and makes the required entries in, an Excel return-on-investment analysis software tool. The results of an analysis are presented in both tabular and graphical displays.

Advanced Propulsion System Studies for General Aviation Aircraft

NASA Technical Reports Server (NTRS)

Eisenberg, Joseph D. (Technical Monitor); German, Jon

2003-01-01

This final report addresses the following topics: Market Impact Analysis (1) assessment of general aviation, including commuter/regional, aircraft market impact due to incorporation of advanced technology propulsion system on acquisition and operating costs, job creation and/or manpower demand, and future fleet size; (2) selecting an aircraft and engine for the study by focusing on the next generation 19-passenger commuter and the Williams International FJ44 turbofan engine growth. Propulsion System Analysis Conducted mission analysis studies and engine cycle analysis to define a new commuter mission and required engine performance, define acquisition and operating costs and, select engine configuration and initiated preliminary design for hardware modifications required. Propulsion System Benefits (1) assessed and defined engine emissions improvements, (2) assessed and defined noise reduction potential and, (3) conducted a cost analysis impact study. Review of Relevant NASA Programs Conducted literature searches using NERAC and NASA RECON services for related technology in the emissions and acoustics area. Preliminary Technology Development Plans Defined plan to incorporate technology improvements for an FJ44-2 growth engine in performance, emissions, and noise suppression.

75 FR 62508 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... Noon 1. Welcome and Introductions. 2. ETRAC Member Discussion Emerging Technology Analysis. 3. Public... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC...

75 FR 72792 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

... Noon 1. Welcome and Introductions. 2. ETRAC Member Discussion Emerging Technology Analysis. 3. Public... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC...

A life cycle assessment and economic analysis of the Scum-to-Biodiesel technology in wastewater treatment plants.

PubMed

Mu, Dongyan; Addy, Min; Anderson, Erik; Chen, Paul; Ruan, Roger

2016-03-01

This study used life cycle assessment and technical economic analysis tools in evaluating a novel Scum-to-Biodiesel technology and compares the technology with scum digestion and combustion processes. The key variables that control environmental and economic performance are identified and discussed. The results show that all impacts examined for the Scum-to-Biodiesel technology are below zero indicating significant environmental benefits could be drawn from it. Of the three technologies examined, the Scum-to-Biodiesel technology has the best environmental performance in fossil fuel depletion, GHG emissions, and eutrophication, whereas combustion has the best performance on acidification. Of all process inputs assessed, process heat, glycerol, and methanol uses had the highest impacts, much more than any other inputs considered. The Scum-to-Biodiesel technology also makes higher revenue than other technologies. The diesel price is a key variable for its economic performance. The research demonstrates the feasibility and benefits in developing Scum-to-Biodiesel technology in wastewater treatment facilities. Copyright © 2015 Elsevier Ltd. All rights reserved.

After the clinic? Researching sexual health technology in context.

PubMed

Davis, Mark

2015-01-01

There is great interest in what testing, pharmaceutical, information and social media technology can do for sexual health. Much programmatic and research activity is focused on assessing how these technologies can be used to best effect. Less obvious are analyses that place technology into historical, political and real-world settings. Developing an 'in-context' analysis of sexual health technology, this paper draws on interviews with leading community advocates, researchers and clinicians in Australia, Canada and the UK and looks across examples, including social media, rapid HIV testing, pre-Exposure Prophylaxis for HIV and polymerase chain reaction Chlamydia testing. The analysis is framed by studies of techno-society and the dialectics of sex-affirmative advocacy with biomedical authority and attends to: the rationalistic and affective dimensions of the imaginary associated with technology; the role of technology in the re-spatialisation and re-temporalisation of the sexual health clinic; and the re-invention of technology in its real-world contexts. This in-context approach is important for: the effective implementation of new technology; strengthening the social science contribution to the field; and enriching social theory in general on life in techno-societies.

Aeronautics Technology Possibilities for 2000: Report of a Workshop

NASA Technical Reports Server (NTRS)

1984-01-01

Topics discussed include: Aerodynamics; Propulsion; Structural Analysis and Design Technology; Materials for Structural Members, Propulsion Systems, and Subsystems; Guidance, Navigation, and Control; Computer and Information Technology; Human Factors Engineering; Systems Integration.

Application of forensic DNA testing in the legal system.

PubMed

Primorac, D; Schanfield, M S

2000-03-01

DNA technology has taken an irreplaceable position in the field of the forensic sciences. Since 1985, when Peter Gill and Alex Jeffreys first applied DNA technology to forensic problems, to the present, more than 50,000 cases worldwide have been solved through the use of DNA based technology. Although the development of DNA typing in forensic science has been extremely rapid, today we are witnessing a new era of DNA technology including automation and miniaturization. In forensic science, DNA analysis has become "the new form of scientific evidence" and has come under public scrutiny and the demand to show competence. More and more courts admit the DNA based evidence. We believe that in the near future this technology will be generally accepted in the legal system. There are two main applications of DNA analysis in forensic medicine: criminal investigation and paternity testing. In this article we present background information on DNA, human genetics, and the application of DNA analysis to legal problems, as well as the commonly applied respective mathematics.

Actor-network theory: a tool to support ethical analysis of commercial genetic testing.

PubMed

Williams-Jones, Bryn; Graham, Janice E

2003-12-01

Social, ethical and policy analysis of the issues arising from gene patenting and commercial genetic testing is enhanced by the application of science and technology studies, and Actor-Network Theory (ANT) in particular. We suggest the potential for transferring ANT's flexible nature to an applied heuristic methodology for gathering empirical information and for analysing the complex networks involved in the development of genetic technologies. Three concepts are explored in this paper--actor-networks, translation, and drift--and applied to the case of Myriad Genetics and their commercial BRACAnalysis genetic susceptibility test for hereditary breast cancer. Treating this test as an active participant in socio-technical networks clarifies the extent to which it interacts with, shapes and is shaped by people, other technologies, and institutions. Such an understanding enables more sophisticated and nuanced technology assessment, academic analysis, as well as public debate about the social, ethical and policy implications of the commercialization of new genetic technologies.

A Framework for Assessment of Aviation Safety Technology Portfolios

NASA Technical Reports Server (NTRS)

Jones, Sharon M.; Reveley, Mary S.

2014-01-01

The programs within NASA's Aeronautics Research Mission Directorate (ARMD) conduct research and development to improve the national air transportation system so that Americans can travel as safely as possible. NASA aviation safety systems analysis personnel support various levels of ARMD management in their fulfillment of system analysis and technology prioritization as defined in the agency's program and project requirements. This paper provides a framework for the assessment of aviation safety research and technology portfolios that includes metrics such as projected impact on current and future safety, technical development risk and implementation risk. The paper also contains methods for presenting portfolio analysis and aviation safety Bayesian Belief Network (BBN) output results to management using bubble charts and quantitative decision analysis techniques.

[Quantitative data analysis for live imaging of bone.

PubMed

Seno, Shigeto

Bone tissue is a hard tissue, it was difficult to observe the interior of the bone tissue alive. With the progress of microscopic technology and fluorescent probe technology in recent years, it becomes possible to observe various activities of various cells forming bone society. On the other hand, the quantitative increase in data and the diversification and complexity of the images makes it difficult to perform quantitative analysis by visual inspection. It has been expected to develop a methodology for processing microscopic images and data analysis. In this article, we introduce the research field of bioimage informatics which is the boundary area of biology and information science, and then outline the basic image processing technology for quantitative analysis of live imaging data of bone.

Image Sharing Technologies and Reduction of Imaging Utilization: A Systematic Review and Meta-analysis.

PubMed

Vest, Joshua R; Jung, Hye-Young; Ostrovsky, Aaron; Das, Lala Tanmoy; McGinty, Geraldine B

2015-12-01

Image sharing technologies may reduce unneeded imaging by improving provider access to imaging information. A systematic review and meta-analysis were conducted to summarize the impact of image sharing technologies on patient imaging utilization. Quantitative evaluations of the effects of PACS, regional image exchange networks, interoperable electronic heath records, tools for importing physical media, and health information exchange systems on utilization were identified through a systematic review of the published and gray English-language literature (2004-2014). Outcomes, standard effect sizes (ESs), settings, technology, populations, and risk of bias were abstracted from each study. The impact of image sharing technologies was summarized with random-effects meta-analysis and meta-regression models. A total of 17 articles were included in the review, with a total of 42 different studies. Image sharing technology was associated with a significant decrease in repeat imaging (pooled effect size [ES] = -0.17; 95% confidence interval [CI] = [-0.25, -0.09]; P < .001). However, image sharing technology was associated with a significant increase in any imaging utilization (pooled ES = 0.20; 95% CI = [0.07, 0.32]; P = .002). For all outcomes combined, image sharing technology was not associated with utilization. Most studies were at risk for bias. Image sharing technology was associated with reductions in repeat and unnecessary imaging, in both the overall literature and the most-rigorous studies. Stronger evidence is needed to further explore the role of specific technologies and their potential impact on various modalities, patient populations, and settings. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Image Sharing Technologies and Reduction of Imaging Utilization: A Systematic Review and Meta-analysis

PubMed Central

Vest, Joshua R.; Jung, Hye-Young; Ostrovsky, Aaron; Das, Lala Tanmoy; McGinty, Geraldine B.

2016-01-01

Introduction Image sharing technologies may reduce unneeded imaging by improving provider access to imaging information. A systematic review and meta-analysis were conducted to summarize the impact of image sharing technologies on patient imaging utilization. Methods Quantitative evaluations of the effects of PACS, regional image exchange networks, interoperable electronic heath records, tools for importing physical media, and health information exchange systems on utilization were identified through a systematic review of the published and gray English-language literature (2004–2014). Outcomes, standard effect sizes (ESs), settings, technology, populations, and risk of bias were abstracted from each study. The impact of image sharing technologies was summarized with random-effects meta-analysis and meta-regression models. Results A total of 17 articles were included in the review, with a total of 42 different studies. Image sharing technology was associated with a significant decrease in repeat imaging (pooled effect size [ES] = −0.17; 95% confidence interval [CI] = [−0.25, −0.09]; P < .001). However, image sharing technology was associated with a significant increase in any imaging utilization (pooled ES = 0.20; 95% CI = [0.07, 0.32]; P = .002). For all outcomes combined, image sharing technology was not associated with utilization. Most studies were at risk for bias. Conclusions Image sharing technology was associated with reductions in repeat and unnecessary imaging, in both the overall literature and the most-rigorous studies. Stronger evidence is needed to further explore the role of specific technologies and their potential impact on various modalities, patient populations, and settings. PMID:26614882

Technology selection for ballast water treatment by multi-stakeholders: A multi-attribute decision analysis approach based on the combined weights and extension theory.

PubMed

Ren, Jingzheng

2018-01-01

This objective of this study is to develop a generic multi-attribute decision analysis framework for ranking the technologies for ballast water treatment and determine their grades. An evaluation criteria system consisting of eight criteria in four categories was used to evaluate the technologies for ballast water treatment. The Best-Worst method, which is a subjective weighting method and Criteria importance through inter-criteria correlation method, which is an objective weighting method, were combined to determine the weights of the evaluation criteria. The extension theory was employed to prioritize the technologies for ballast water treatment and determine their grades. An illustrative case including four technologies for ballast water treatment, i.e. Alfa Laval (T 1 ), Hyde (T 2 ), Unitor (T 3 ), and NaOH (T 4 ), were studied by the proposed method, and the Hyde (T 2 ) was recognized as the best technology. Sensitivity analysis was also carried to investigate the effects of the combined coefficients and the weights of the evaluation criteria on the final priority order of the four technologies for ballast water treatment. The sum weighted method and the TOPSIS was also employed to rank the four technologies, and the results determined by these two methods are consistent to that determined by the proposed method in this study. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mobile technology in clinical teaching.

PubMed

Mackay, B J; Anderson, J; Harding, T

2017-01-01

Technology is having a profound effect on education in the 21st century and nurse educators are being challenged to integrate technological innovation to assist students in their learning. This paper reports a study on the introduction of smart mobile technology to support student learning in the clinical environment. In a climate of collaborative inquiry, clinical lecturers and two researchers from the same department carried out a project in three phases: formation, implementation and analysis. Following the formation phase, six clinical lecturers adopted iPads to support their clinical teaching (implementation phase). At this time they also kept reflective journals. In the analysis phase a thematic analysis of the data from the journals and from a focus group found both enabling and constraining factors influenced the use of iPads by clinical lecturers. The themes categorised as enablers were: resources and technology; and, management and technology support. Those identified as barriers or constraining factors were: clinical staff engagement; and lecturer experience with technology. Student engagement and learning, and connectivity were both enabling and constraining factors. This paper concludes that the use of a mobile device such as an iPad can enhance teaching in clinical settings but that in order for such devices to be successfully integrated into clinical teaching consideration needs to be given to professional development needs, adequate resourcing and technology support. Copyright © 2016 Elsevier Ltd. All rights reserved.

The 2011 nuclear medicine technology job analysis project of the American Registry of Radiologic Technologists.

PubMed

Anderson, Dan; Hubble, William; Press, Bret A; Hall, Scott K; Michels, Ann D; Koenen, Roxanne; Vespie, Alan W

2010-12-01

The American Registry of Radiologic Technologists (ARRT) conducts periodic job analysis projects to update the content and eligibility requirements for all certification examinations. In 2009, the ARRT conducted a comprehensive job analysis project to update the content specifications and clinical competency requirements for the nuclear medicine technology examination. ARRT staff and a committee of volunteer nuclear medicine technologists designed a job analysis survey that was sent to a random sample of 1,000 entry-level staff nuclear medicine technologists. Through analysis of the survey data and judgments of the committee, the project resulted in changes to the nuclear medicine technology examination task list, content specifications, and clinical competency requirements. The primary changes inspired by the project were the introduction of CT content to the examination and the expansion of the content covering cardiac procedures.

Technologies of democracy: experiments and demonstrations.

PubMed

Laurent, Brice

2011-12-01

Technologies of democracy are instruments based on material apparatus, social practices and expert knowledge that organize the participation of various publics in the definition and treatment of public problems. Using three examples related to the engagement of publics in nanotechnology in France (a citizen conference, a series of public meetings, and an industrial design process), the paper argues that Science and Technology Studies provide useful tools and methods for the analysis of technologies of democracy. Operations of experiments and public demonstrations can be described, as well as controversies about technologies of democracy giving rise to counter-experiments and counter-demonstrations. The political value of the analysis of public engagement lies in the description of processes of stabilization of democratic orders and in the display of potential alternative political arrangements.

Commercial non-aerospace technology transfer program for the 2000s: Strategic analysis and implementation

NASA Technical Reports Server (NTRS)

Horsham, Gary A. P.

1992-01-01

This report presents a strategic analysis and implementation plan for NASA's Office of Commercial Programs (OCP), Technology Transfer Division's (TTD), Technology Transfer Program. The main objectives of this study are to: (1) characterize the NASA TTD's environment and past organizational structure; (2) clearly identify current and prospective programmatic efforts; (3) determine an evolutionary view of an organizational structure which could lead to the accomplishment of NASA's future technology transfer aims; and (4) formulate a strategy and plan to improve NASA's (and other federal agencies) ability to transfer technology to the non-aerospace sectors of the U.S. economy. The planning horizon for this study extends through the remainder of the 1990s to the year 2000.

Green Curriculum Analysis in Technological Education

ERIC Educational Resources Information Center

Chakraborty, Arpita; Singh, Manvendra Pratap; Roy, Mousumi

2018-01-01

With rapid industrialization and technological development, India is facing adverse affects of unsustainable pattern of production and consumption. Education for sustainable development has been widely recognized to reduce the threat of environmental degradation and resource depletion. This paper used the content analysis method to explore the…

Reconsidering Human Performance Technology

ERIC Educational Resources Information Center

Jang, Hwan Young

2008-01-01

This article discusses three perceived challenges in the field of human performance technology: a missing link from training to performance, limitations in gap analysis and cause analysis, and a lack of attention to business and organization performance. It then provides possible alternatives for each issue, such as instructional system…

The HTA Risk Analysis Chart: Visualising the Need for and Potential Value of Managed Entry Agreements in Health Technology Assessment.

PubMed

Grimm, Sabine Elisabeth; Strong, Mark; Brennan, Alan; Wailoo, Allan J

2017-12-01

Recent changes to the regulatory landscape of pharmaceuticals may sometimes require reimbursement authorities to issue guidance on technologies that have a less mature evidence base. Decision makers need to be aware of risks associated with such health technology assessment (HTA) decisions and the potential to manage this risk through managed entry agreements (MEAs). This work develops methods for quantifying risk associated with specific MEAs and for clearly communicating this to decision makers. We develop the 'HTA risk analysis chart', in which we present the payer strategy and uncertainty burden (P-SUB) as a measure of overall risk. The P-SUB consists of the payer uncertainty burden (PUB), the risk stemming from decision uncertainty as to which is the truly optimal technology from the relevant set of technologies, and the payer strategy burden (PSB), the additional risk of approving a technology that is not expected to be optimal. We demonstrate the approach using three recent technology appraisals from the UK National Institute for Health and Clinical Excellence (NICE), each of which considered a price-based MEA. The HTA risk analysis chart was calculated using results from standard probabilistic sensitivity analyses. In all three HTAs, the new interventions were associated with substantial risk as measured by the P-SUB. For one of these technologies, the P-SUB was reduced to zero with the proposed price reduction, making this intervention cost effective with near complete certainty. For the other two, the risk reduced substantially with a much reduced PSB and a slightly increased PUB. The HTA risk analysis chart shows the risk that the healthcare payer incurs under unresolved decision uncertainty and when considering recommending a technology that is not expected to be optimal given current evidence. This allows the simultaneous consideration of financial and data-collection MEA schemes in an easily understood format. The use of HTA risk analysis charts will help to ensure that MEAs are considered within a standard utility-maximising health economic decision-making framework.

Space station commonality analysis

NASA Technical Reports Server (NTRS)

1988-01-01

This study was conducted on the basis of a modification to Contract NAS8-36413, Space Station Commonality Analysis, which was initiated in December, 1987 and completed in July, 1988. The objective was to investigate the commonality aspects of subsystems and mission support hardware while technology experiments are accommodated on board the Space Station in the mid-to-late 1990s. Two types of mission are considered: (1) Advanced solar arrays and their storage; and (2) Satellite servicing. The point of departure for definition of the technology development missions was a set of missions described in the Space Station Mission Requirements Data Base. (MRDB): TDMX 2151 Solar Array/Energy Storage Technology; TDMX 2561 Satellite Servicing and Refurbishment; TDMX 2562 Satellite Maintenance and Repair; TDMX 2563 Materials Resupply (to a free-flyer materials processing platform); TDMX 2564 Coatings Maintenance Technology; and TDMX 2565 Thermal Interface Technology. Issues to be addressed according to the Statement of Work included modularity of programs, data base analysis interactions, user interfaces, and commonality. The study was to consider State-of-the-art advances through the 1990s and to select an appropriate scale for the technology experiments, considering hardware commonality, user interfaces, and mission support requirements. The study was to develop evolutionary plans for the technology advancement missions.

Human Welfare and Technological Innovation. Open Grants Papers No. 2.

ERIC Educational Resources Information Center

Hayashi, Yujiro

This publication on human welfare and technological innovation contains two sections. The first section examines the objectives and functions of technological innovation while the second section discusses the direction and analysis of technology transfer between Japan and other nations. Subtopics within the first section include: (1)…

SCIENCE AND TECHNOLOGY AS DEVELOPMENT FACTORS.

ERIC Educational Resources Information Center

LENGYEL, PETER

PROCEEDINGS FROM A MEETING OF UNESCO'S ADVISORY COUNCIL TO ITS OFFICE OF ECONOMIC ANALYSIS AND ITS DIVISION OF SCIENCE POLICY ARE REPORTED. THE CENTRAL THEME OF THE CONFERENCE IS SCIENCE AND TECHNOLOGY IN ECONOMIC DEVELOPMENT. AN INTRODUCTORY PAPER DEALS WITH RESOURCES IN SCIENCE AND TECHNOLOGY, THE INFLUENCE OF SCIENCE AND TECHNOLOGY ON…

Technology Expenditures: A Policy Analysis in a Selected School and Return on Investment

ERIC Educational Resources Information Center

Ferguson, Timothy Brian

2012-01-01

The process of retooling schools to prepare students for the Twenty-First Century requires that schools invest in technology resources and ongoing professional development for teachers to support the transformation of teaching and learning practices through technology integration. Technology resources are still considered to be educational…

Quantitative Analysis of Non-Financial Motivators and Job Satisfaction of Information Technology Professionals

ERIC Educational Resources Information Center

Mieszczak, Gina L.

2013-01-01

Organizations depend extensively on Information Technology professionals to drive and deliver technology solutions quickly, efficiently, and effectively to achieve business goals and profitability. It has been demonstrated that professionals with experience specific to the company are valuable assets, and their departure puts technology projects…

Doing What Comes Naturally? Student Perceptions and Use of Collaborative Technologies

ERIC Educational Resources Information Center

Kalin, Jason

2012-01-01

This study investigates how students perceive and use collaborative technologies while also examining the meanings students assign to both collaboration and technology. A qualitative inductive analysis of students' assignments in a professional communication course demonstrates that students use technology to collaborate for its Accessibility,…

Technology for large space systems: A bibliography with indexes (supplement 08)

NASA Technical Reports Server (NTRS)

1983-01-01

This bibliography lists 414 reports, articles and other documents introduced into the NASA scientific and technical information system. It provides helpful information to the researcher, manager, and designer in technology development and mission design in the area of Large Space System Technology. Subject matter is grouped according to systems, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems.

Readiness for living technology: a comparative study of the uptake of robot technology in the Danish health-care sector.

PubMed

Peronard, Jean-Paul

2013-01-01

This article is a comparative analysis between workers in health care with high and low degree of readiness for living technology such as robotics. To explore the differences among workers' readiness, statistical analysis was conducted in a data set obtained from 200 respondents. The results showed important differences between high- and low-readiness types on issues such as staff security, documentation, autonomy, and future challenges.

Technology for large space systems: A bibliography with indexes (supplement 09)

NASA Technical Reports Server (NTRS)

1983-01-01

This bibliography lists 414 reports, articles and other documents introduced into the NASA scientific and technical information system between January 1, 1983 and June 30, 1983. Information on technology development and mission design in the area of Large Space System Technology is provided. Subject matter is grouped according to systems, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics. advanced materials, assembly concepts, propulsion, and solar power satellite systems.

Technology for large space systems: A bibliography with indexes (supplement 10)

NASA Technical Reports Server (NTRS)

1984-01-01

The bibliography lists 408 reports, articles and other documents introduced into the NASA scientific and technical information system to provide helpful information to the researcher, manager, and designer in technology development and mission design in the area of large space system technology. Subject matter is grouped according to systems, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems.

Methodology for the comparative assessment of the Satellite Power System (SPS) and alternative technologies

NASA Technical Reports Server (NTRS)

Wolsko, T.; Buehring, W.; Cirillo, R.; Gasper, J.; Habegger, L.; Hub, K.; Newsom, D.; Samsa, M.; Stenehjem, E.; Whitfield, R.

1980-01-01

The energy systems concerned are the satellite power system, several coal technologies, geothermal energy, fission, fusion, terrestrial solar systems, and ocean thermal energy conversion. Guidelines are suggested for the characterization of these systems, side-by-side analysis, alternative futures analysis, and integration and aggregation of data. A description of the methods for assessing the technical, economic, environmental, societal, and institutional issues surrounding the development of the selected energy technologies is presented.

Impact of new computing systems on computational mechanics and flight-vehicle structures technology

NASA Technical Reports Server (NTRS)

Noor, A. K.; Storaasli, O. O.; Fulton, R. E.

1984-01-01

Advances in computer technology which may have an impact on computational mechanics and flight vehicle structures technology were reviewed. The characteristics of supersystems, highly parallel systems, and small systems are summarized. The interrelations of numerical algorithms and software with parallel architectures are discussed. A scenario for future hardware/software environment and engineering analysis systems is presented. Research areas with potential for improving the effectiveness of analysis methods in the new environment are identified.

Intelligent Control in Automation Based on Wireless Traffic Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurt Derr; Milos Manic

2007-09-01

Wireless technology is a central component of many factory automation infrastructures in both the commercial and government sectors, providing connectivity among various components in industrial realms (distributed sensors, machines, mobile process controllers). However wireless technologies provide more threats to computer security than wired environments. The advantageous features of Bluetooth technology resulted in Bluetooth units shipments climbing to five million per week at the end of 2005 [1, 2]. This is why the real-time interpretation and understanding of Bluetooth traffic behavior is critical in both maintaining the integrity of computer systems and increasing the efficient use of this technology in controlmore » type applications. Although neuro-fuzzy approaches have been applied to wireless 802.11 behavior analysis in the past, a significantly different Bluetooth protocol framework has not been extensively explored using this technology. This paper presents a new neurofuzzy traffic analysis algorithm of this still new territory of Bluetooth traffic. Further enhancements of this algorithm are presented along with the comparison against the traditional, numerical approach. Through test examples, interesting Bluetooth traffic behavior characteristics were captured, and the comparative elegance of this computationally inexpensive approach was demonstrated. This analysis can be used to provide directions for future development and use of this prevailing technology in various control type applications, as well as making the use of it more secure.« less

Intelligent Control in Automation Based on Wireless Traffic Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurt Derr; Milos Manic

Wireless technology is a central component of many factory automation infrastructures in both the commercial and government sectors, providing connectivity among various components in industrial realms (distributed sensors, machines, mobile process controllers). However wireless technologies provide more threats to computer security than wired environments. The advantageous features of Bluetooth technology resulted in Bluetooth units shipments climbing to five million per week at the end of 2005 [1, 2]. This is why the real-time interpretation and understanding of Bluetooth traffic behavior is critical in both maintaining the integrity of computer systems and increasing the efficient use of this technology in controlmore » type applications. Although neuro-fuzzy approaches have been applied to wireless 802.11 behavior analysis in the past, a significantly different Bluetooth protocol framework has not been extensively explored using this technology. This paper presents a new neurofuzzy traffic analysis algorithm of this still new territory of Bluetooth traffic. Further enhancements of this algorithm are presented along with the comparison against the traditional, numerical approach. Through test examples, interesting Bluetooth traffic behavior characteristics were captured, and the comparative elegance of this computationally inexpensive approach was demonstrated. This analysis can be used to provide directions for future development and use of this prevailing technology in various control type applications, as well as making the use of it more secure.« less

Power Systems Life Cycle Analysis Tool (Power L-CAT).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andruski, Joel; Drennen, Thomas E.

2011-01-01

The Power Systems L-CAT is a high-level dynamic model that calculates levelized production costs and tracks environmental performance for a range of electricity generation technologies: natural gas combined cycle (using either imported (LNGCC) or domestic natural gas (NGCC)), integrated gasification combined cycle (IGCC), supercritical pulverized coal (SCPC), existing pulverized coal (EXPC), nuclear, and wind. All of the fossil fuel technologies also include an option for including carbon capture and sequestration technologies (CCS). The model allows for quick sensitivity analysis on key technical and financial assumptions, such as: capital, O&M, and fuel costs; interest rates; construction time; heat rates; taxes; depreciation;more » and capacity factors. The fossil fuel options are based on detailed life cycle analysis reports conducted by the National Energy Technology Laboratory (NETL). For each of these technologies, NETL's detailed LCAs include consideration of five stages associated with energy production: raw material acquisition (RMA), raw material transport (RMT), energy conversion facility (ECF), product transportation and distribution (PT&D), and end user electricity consumption. The goal of the NETL studies is to compare existing and future fossil fuel technology options using a cradle-to-grave analysis. The NETL reports consider constant dollar levelized cost of delivered electricity, total plant costs, greenhouse gas emissions, criteria air pollutants, mercury (Hg) and ammonia (NH3) emissions, water withdrawal and consumption, and land use (acreage).« less

Exploration Laboratory Analysis

NASA Technical Reports Server (NTRS)

Krihak, M.; Ronzano, K.; Shaw, T.

2016-01-01

The Exploration Laboratory Analysis (ELA) project supports the Exploration Medical Capability (ExMC) risk to minimize or reduce the risk of adverse health outcomes and decrements in performance due to in-flight medical capabilities on human exploration missions. To mitigate this risk, the availability of inflight laboratory analysis instrumentation has been identified as an essential capability for manned exploration missions. Since a single, compact space-ready laboratory analysis capability to perform all exploration clinical measurements is not commercially available, the ELA project objective is to demonstrate the feasibility of emerging operational and analytical capability as a biomedical diagnostics precursor to long duration manned exploration missions. The initial step towards ground and flight demonstrations in fiscal year (FY) 2015 was the downselection of platform technologies for demonstrations in the space environment. The technologies selected included two Small Business Innovation Research (SBIR) performers: DNA Medicine Institute's rHEALTH X and Intelligent Optical System's lateral flow assays combined with Holomic's smartphone analyzer. The selection of these technologies were based on their compact size, breadth of analytical capability and favorable ability to process fluids in a space environment, among several factors. These two technologies will be advanced to meet ground and flight demonstration success criteria and requirements. The technology demonstrations and metrics for success will be finalized in FY16. Also, the downselected performers will continue the technology development phase towards meeting prototype deliverables in either late 2016 or 2017.

EVALUATION OF THE EFFECTIVENESS OF TRUCK EFFICIENCY TECHNOLOGIES IN CLASS 8 TRACTOR-TRAILERS BASED ON A TRACTIVE ENERGY ANALYSIS USING MEASURED DRIVE CYCLE DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaClair, Tim J; Gao, Zhiming; Fu, Joshua S.

2014-01-01

Quantifying the fuel savings that can be achieved from different truck fuel efficiency technologies for a fleet s specific usage allows the fleet to select the combination of technologies that will yield the greatest operational efficiency and profitability. This paper presents an analysis of vehicle usage in a commercial vehicle fleet and an assessment of advanced efficiency technologies using an analysis of measured drive cycle data for a class 8 regional commercial shipping fleet. Drive cycle measurements during a period of a full year from six tractor-trailers in normal operations in a less-than-truckload (LTL) carrier were analyzed to develop amore » characteristic drive cycle that is highly representative of the fleet s usage. The vehicle mass was also estimated to account for the variation of loads that the fleet experienced. The drive cycle and mass data were analyzed using a tractive energy analysis to quantify the fuel efficiency and CO2 emissions benefits that can be achieved on class 8 tractor-trailers when using advanced efficiency technologies, either individually or in combination. Although differences exist among class 8 tractor-trailer fleets, this study provides valuable insight into the energy and emissions reduction potential that various technologies can bring in this important trucking application.« less

Titanium and advanced composite structures for a supersonic cruise arrow wing configuration

NASA Technical Reports Server (NTRS)

Turner, M. J.; Hoy, J. M.

1976-01-01

Structural design studies were made, based on current technology and on an estimate of technology to be available in the mid 1980's, to assess the relative merits of structural concepts and materials for an advanced arrow wing configuration cruising at Mach 2.7. Preliminary studies were made to insure compliance of the configuration with general design criteria, integrate the propulsion system with the airframe, and define an efficient structural arrangement. Material and concept selection, detailed structural analysis, structural design and airplane mass analysis were completed based on current technology. Based on estimated future technology, structural sizing for strength and a preliminary assessment of the flutter of a strength designed composite structure were completed. An advanced computerized structural design system was used, in conjunction with a relatively complex finite element model, for detailed analysis and sizing of structural members.

Trends and Issues in Technology Education Research in Taiwan: A Co-Word Analysis of 1994-2013 Graduate Theses

ERIC Educational Resources Information Center

Lee, Lung-Sheng; Fang, Yu-Shen

2015-01-01

In Taiwan, the Technology Education for 1-12 graders is comprised of two courses--Living Technology (LT) and Information Technology (IT). With its ever-changing feature, Technology Education needs on-going research to support its decisions and actions. The education-related academic programs in universities regularly concern about the development…

Aeronautics systems technology studies

NASA Technical Reports Server (NTRS)

Bauchspies, J. S.

1983-01-01

Data collection and analysis in the areas of air transportation, aircraft manufacturing and sales, airline operations, market projections, internal trade, and energy consumption; legislation and regulations, technology needs; surveys; decision-making; cost analyses; and technology transfer are discussed.

Plant phenomics: an overview of image acquisition technologies and image data analysis algorithms

PubMed Central

Perez-Sanz, Fernando; Navarro, Pedro J

2017-01-01

Abstract The study of phenomes or phenomics has been a central part of biology. The field of automatic phenotype acquisition technologies based on images has seen an important advance in the last years. As with other high-throughput technologies, it addresses a common set of problems, including data acquisition and analysis. In this review, we give an overview of the main systems developed to acquire images. We give an in-depth analysis of image processing with its major issues and the algorithms that are being used or emerging as useful to obtain data out of images in an automatic fashion. PMID:29048559

A Survey of CAD/CAM Technology Applications in the U.S. Shipbuilding Industry

DTIC Science & Technology

1984-01-01

operation for drafting. Computer Aided Engineering (CAE) analysis is used primarily to determine the validity of design characteristics and produc- tion...include time standard generation, sea trial analysis , and group Systems integration While no systems surveyed Aided Design (CAD) is the technology... analysis . is the largest problem involving software packages. are truly integrated, many are interfaced. Computer most interfaced category with links

Applications and benefits of technology in naturally fractured, low permeability reservoirs with special emphasis on results from GRI`s devonian shale and berea sand research in the appalachian basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jochen, J.E.; Hopkins, C.W.

1993-12-31

;Contents: Naturally fractured reservoir description; Geologic considerations; Shale-specific log model; Stress profiles; Berea reasearch; Benefits analysis; Summary of technologies; Novel well test methods; Natural fracture identification; Reverse drilling; Production data analysis; Fracture treatment quality control; Novel core analysis methods; and Shale well cleanouts.

40 CFR 1042.245 - Deterioration factors.

Code of Federal Regulations, 2014 CFR

2014-07-01

... to meet the Tier 1 and Tier 2 emission standards would qualify as established technology. We must... deterioration factors for Category 1 and Category 2 engines, either with an engineering analysis, with pre... deterioration factors for an engine family with established technology based on engineering analysis instead of...

40 CFR 1042.245 - Deterioration factors.

Code of Federal Regulations, 2012 CFR

2012-07-01

... to meet the Tier 1 and Tier 2 emission standards would qualify as established technology. We must... deterioration factors for Category 1 and Category 2 engines, either with an engineering analysis, with pre... deterioration factors for an engine family with established technology based on engineering analysis instead of...

40 CFR 1042.245 - Deterioration factors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... to meet the Tier 1 and Tier 2 emission standards would qualify as established technology. We must... deterioration factors for Category 1 and Category 2 engines, either with an engineering analysis, with pre... deterioration factors for an engine family with established technology based on engineering analysis instead of...

40 CFR 1042.245 - Deterioration factors.

Code of Federal Regulations, 2011 CFR

2011-07-01

... to meet the Tier 1 and Tier 2 emission standards would qualify as established technology. We must... deterioration factors for Category 1 and Category 2 engines, either with an engineering analysis, with pre... deterioration factors for an engine family with established technology based on engineering analysis instead of...

40 CFR 1042.245 - Deterioration factors.

Code of Federal Regulations, 2013 CFR

2013-07-01

... to meet the Tier 1 and Tier 2 emission standards would qualify as established technology. We must... deterioration factors for Category 1 and Category 2 engines, either with an engineering analysis, with pre... deterioration factors for an engine family with established technology based on engineering analysis instead of...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fact sheet describing the National Renewable Energy Laboratory's (NREL's) Fuel Cell Technology Status Analysis Project. NREL is seeking fuel cell industry partners from the United States and abroad to participate in an objective and credible analysis of commercially available fuel cell products to benchmark the current state of the technology and support industry growth.

TECHNOLOGICAL INNOVATION IN NEUROSURGERY: A QUANTITATIVE STUDY

PubMed Central

Marcus, Hani J; Hughes-Hallett, Archie; Kwasnicki, Richard M; Darzi, Ara; Yang, Guang-Zhong; Nandi, Dipankar

2015-01-01

Object Technological innovation within healthcare may be defined as the introduction of a new technology that initiates a change in clinical practice. Neurosurgery is a particularly technologically intensive surgical discipline, and new technologies have preceded many of the major advances in operative neurosurgical technique. The aim of the present study was to quantitatively evaluate technological innovation in neurosurgery using patents and peer-reviewed publications as metrics of technology development and clinical translation respectively. Methods A patent database was searched between 1960 and 2010 using the search terms “neurosurgeon” OR “neurosurgical” OR “neurosurgery”. The top 50 performing patent codes were then grouped into technology clusters. Patent and publication growth curves were then generated for these technology clusters. A top performing technology cluster was then selected as an exemplar for more detailed analysis of individual patents. Results In all, 11,672 patents and 208,203 publications relating to neurosurgery were identified. The top performing technology clusters over the 50 years were: image guidance devices, clinical neurophysiology devices, neuromodulation devices, operating microscopes and endoscopes. Image guidance and neuromodulation devices demonstrated a highly correlated rapid rise in patents and publications, suggesting they are areas of technology expansion. In-depth analysis of neuromodulation patents revealed that the majority of high performing patents were related to Deep Brain Stimulation (DBS). Conclusions Patent and publication data may be used to quantitatively evaluate technological innovation in neurosurgery. PMID:25699414

Supporting Weather Data

NASA Technical Reports Server (NTRS)

2004-01-01

Since its founding in 1992, Global Science & Technology, Inc. (GST), of Greenbelt, Maryland, has been developing technologies and providing services in support of NASA scientific research. GST specialties include scientific analysis, science data and information systems, data visualization, communications, networking and Web technologies, computer science, and software system engineering. As a longtime contractor to Goddard Space Flight Center s Earth Science Directorate, GST scientific, engineering, and information technology staff have extensive qualifications with the synthesis of satellite, in situ, and Earth science data for weather- and climate-related projects. GST s experience in this arena is end-to-end, from building satellite ground receiving systems and science data systems, to product generation and research and analysis.

All the Missiles Work: Technological Dislocations and Military Innovation: A Case Study in US Air Force Air-to-Air Armament, Post-World War II through Operation Rolling Thunder

DTIC Science & Technology

2015-01-01

technological momentum attempted to reconcile two of the disparate perspectives???social constructivism and technological determinism . The theory of...perspectives—social constructivism and technological determinism . The theory of technological dislocations advanced by this thesis is a refinement of...constructivism to technological determinism is unidirectional.114 His theory therefore tends to focus historical analysis on characterizing the

Sustainability assessment of tertiary wastewater treatment technologies: a multi-criteria analysis.

PubMed

Plakas, K V; Georgiadis, A A; Karabelas, A J

2016-01-01

The multi-criteria analysis gives the opportunity to researchers, designers and decision-makers to examine decision options in a multi-dimensional fashion. On this basis, four tertiary wastewater treatment (WWT) technologies were assessed regarding their sustainability performance in producing recycled wastewater, considering a 'triple bottom line' approach (i.e. economic, environmental, and social). These are powdered activated carbon adsorption coupled with ultrafiltration membrane separation (PAC-UF), reverse osmosis, ozone/ultraviolet-light oxidation and heterogeneous photo-catalysis coupled with low-pressure membrane separation (photocatalytic membrane reactor, PMR). The participatory method called simple multi-attribute rating technique exploiting ranks was employed for assigning weights to selected sustainability indicators. This sustainability assessment approach resulted in the development of a composite index as a final metric, for each WWT technology evaluated. The PAC-UF technology appears to be the most appropriate technology, attaining the highest composite value regarding the sustainability performance. A scenario analysis confirmed the results of the original scenario in five out of seven cases. In parallel, the PMR was highlighted as the technology with the least variability in its performance. Nevertheless, additional actions and approaches are proposed to strengthen the objectivity of the final results.

Teacher Learning of Technology Enhanced Formative Assessment

NASA Astrophysics Data System (ADS)

Feldman, Allan; Capobianco, Brenda M.

2008-02-01

This study examined the integration of technology enhanced formative assessment (FA) into teachers' practice. Participants were high school physics teachers interested in improving their use of a classroom response system (CRS) to promote FA. Data were collected using interviews, direct classroom observations, and collaborative discussions. The physics teachers engaged in collaborative action research (AR) to learn how to use FA and CRS to promote student and teacher learning. Data were analyzed using open coding, cross-case analysis, and content analysis. Results from data analysis allowed researchers to construct a model for knowledge skills necessary for the integration of technology enhanced FA into teachers' practice. The model is as a set of four technologies: hardware and software; methods for constructing FA items; pedagogical methods; and curriculum integration. The model is grounded in the idea that teachers must develop these respective technologies as they interact with the CRS (i.e., hardware and software, item construction) and their existing practice (i.e., pedagogical methods, curriculum). Implications are that for teachers to make FA an integral part of their practice using CRS, they must: 1) engage in the four technologies; 2) understand the nature of FA; and 3) collaborate with other interested teachers through AR.

A Transforming Electricity System: Understanding the Interactions Between Clean Energy Technologies, Markets, and Policies

NASA Astrophysics Data System (ADS)

Mooney, David

The U.S. electricity system is currently undergoing a dramatic transformation. State-level renewable portfolio standards, abundant natural gas at low prices, and rapidly falling prices for wind and solar technologies are among the factors that have ushered in this transformation. With objective, rigorous, technology-neutral analysis, NREL aims to increase the understanding of energy policies, markets, resources, technologies, and infrastructure and their connections with economic, environmental, and security priorities. The results of these analyses are meant to inform R&D, policy, and investment decisions as energy-efficient and renewable energy technologies advance from concept to commercial application to market penetration. This talk will provide an overview of how NREL uses high-fidelity data, deep knowledge of energy technology cost and performance, and advanced models and tools to provide the information needed to ensure this transformation occurs economically, while maintaining system reliability. Examples will be explored and will include analysis of tax credit impacts on wind and solar deployment and power sector emissions, as well as analysis of power systems operations in the Eastern Interconnection under 30% wind and solar penetration scenarios. Invited speaker number 47185.

Characterization, monitoring, and sensor technology catalogue

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matalucci, R.V.; Esparza-Baca, C.; Jimenez, R.D.

1995-12-01

This document represents a summary of 58 technologies that are being developed by the Department of Energy`s (DOE`s) Office of Science and Technology (OST) to provide site, waste, and process characterization and monitoring solutions to the DOE weapons complex. The information was compiled to provide performance data on OST-developed technologies to scientists and engineers responsible for preparing Remedial Investigation/Feasibility Studies (RI/FSs) and preparing plans and compliance documents for DOE cleanup and waste management programs. The information may also be used to identify opportunities for partnering and commercialization with industry, DOE laboratories, other federal and state agencies, and the academic community.more » Each technology is featured in a format that provides: (1) a description, (2) technical performance data, (3) applicability, (4) development status, (5) regulatory considerations, (6) potential commercial applications, (7) intellectual property, and (8) points-of-contact. Technologies are categorized into the following areas: (1) Bioremediation Monitoring, (2) Decontamination and Decommissioning, (3) Field Analytical Laboratories, (4) Geophysical and Hydrologic Characterization, (5) Hazardous Inorganic Contaminant Analysis, (6) Hazardous Organic Contaminant Analysis, (7) Mixed Waste, (8) Radioactive Contaminant Analysis, (9) Remote Sensing,(10)Sampling and Drilling, (11) Statistically Guided Sampling, and (12) Tank Waste.« less

High Altitude Long Endurance UAV Analysis of Alternatives and Technology Requirements Development

NASA Technical Reports Server (NTRS)

Nickol, Craig L.; Guynn, Mark D.; Kohout, Lisa L.; Ozoroski, Thomas A.

2007-01-01

An Analysis of Alternatives and a Technology Requirements Study were conducted for two mission areas utilizing various types of High Altitude Long Endurance (HALE) Unmanned Aerial Vehicles (UAV). A hurricane science mission and a communications relay mission provided air vehicle requirements which were used to derive sixteen potential HALE UAV configurations, including heavier-than-air (HTA) and lighter-than-air (LTA) concepts with both consumable fuel and solar regenerative propulsion systems. A HTA diesel-fueled wing-body-tail configuration emerged as the preferred concept given near-term technology constraints. The cost effectiveness analysis showed that simply maximizing vehicle endurance can be a sub-optimum system solution. In addition, the HTA solar regenerative configuration was utilized to perform both a mission requirements study and a technology development study. Given near-term technology constraints, the solar regenerative powered vehicle was limited to operations during the long days and short nights at higher latitudes during the summer months. Technology improvements are required in energy storage system specific energy and solar cell efficiency, along with airframe drag and mass reductions to enable the solar regenerative vehicle to meet the full mission requirements.

Field transportable beta spectrometer. Innovative technology summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-01

The objective of the Large-Scale Demonstration Project (LSDP) is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory-East (ANL) Chicago Pile-5 Test Reactor (CP-5). The purpose of the LSDP is to demonstrate that by using innovative and improved deactivation and decommissioning (D and D) technologies from various sources, significant benefits can be achieved when compared to baseline D and D technologies. One such capability being addressed by the D and D Focus Area is rapid characterization for facility contaminants. The technology was field demonstrated during the period January 7 through January 9, 1997, and offers several potentialmore » benefits, including faster turn-around time, cost reduction, and reduction in secondary waste. This report describes a PC controlled, field-transportable beta counter-spectrometer which uses solid scintillation coincident counting and low-noise photomultiplier tubes to count element-selective filters and other solid media. The dry scintillation counter used in combination with an element-selective technology eliminates the mess and disposal costs of liquid scintillation cocktails. Software in the instrument provides real-time spectral analysis. The instrument can detect and measure Tc-99, Sr-90, and other beta emitters reaching detection limits in the 20 pCi range (with shielding). Full analysis can be achieved in 30 minutes. The potential advantages of a field-portable beta counter-spectrometer include the savings gained from field generated results. The basis for decision-making is provided with a rapid turnaround analysis in the field. This technology would be competitive with the radiometric analysis done in fixed laboratories and the associated chain of custody operations.« less

CONTROLLING SO2 EMISSIONS: A REVIEW OF TECHNOLOGIES

EPA Science Inventory

The report describes flue gas desulfurization (FGD) technologies, assesses their applications, and characterizes their performance. Additionally, it describes some of the advancements that have occurred in FGD technologies. Finally, it presents an analysis of the costs associated...

Research and technology, 1984 report

NASA Technical Reports Server (NTRS)

1984-01-01

Research and technology projects in the following areas are described: cryogenic engineering, hypergolic engineering, hazardous warning instrumentation, structures and mechanics, sensors and controls, computer sciences, communications, material analysis, biomedicine, meteorology, engineering management, logistics, training and maintenance aids, and technology applications.

Analysis on the Efficiency of Science and Technology Resources Utilization in the Provinces along the Belt and Road

NASA Astrophysics Data System (ADS)

Qiong, Wu; Yali, Wang

2018-05-01

With the proposal of the "Belt and Road Initiatives for Science and Technology Innovation" in May 2017, science and technology resources show great value in many areas along the Belt and Road. It is necessary to correctly describe the status and analyze utilization efficiency of science and technology resources in a region, then scientific suggestions for improvement can be put forward.This article choose Guangdong province and Jiangsu province as comparative objects,which are important areas along the Belt and Road.After collecting data from 2002 to 2013, this paper analyze the efficiency of input and output in sci-tech in these two provinces by using Data Envelopment Analysis. Problems in utilization of science and technology resources and suggestions are put forward in this paper. This article aims to offer great reference for improving the utilization of science and technology resources along the Belt and Road.

Personal health technologies, micropolitics and resistance: A new materialist analysis.

PubMed

Fox, Nick J

2017-03-01

Personal health technologies are near-body devices or applications designed for use by a single individual, principally outside healthcare facilities. They enable users to monitor physiological processes or body activity, are frequently communication-enabled and sometimes also intervene therapeutically. This article explores a range of personal health technologies, from blood pressure or blood glucose monitors purchased in pharmacies and fitness monitors such as Fitbit and Nike+ Fuelband to drug pumps and implantable medical devices. It applies a new materialist analysis, first reverse engineering a range of personal health technologies to explore their micropolitics and then forward engineering personal health technologies to meet, variously, public health, corporate, patient and resisting-citizen agendas. This article concludes with a critical discussion of personal health technologies and the possibilities of designing devices and apps that might foster subversive micropolitics and encourage collective and resisting 'citizen health'.

Report explores Congress' science policy

NASA Astrophysics Data System (ADS)

Jones, Richard

Scientists interested in understanding how Congress develops science policy would find it useful to read a recent report by the Carnegie Commission on Science, Technology, and Government. “Science, Technology and Congress: Analysis and Advice from the Congressional Support Agencies” contains revealing insights about the often hard-pressed system that Congress uses to analyze science and technology issues.“Congress is on the front line of many battles over the directions of science and technology,” says the 70-page report. “The quality of congressional decisions on these issues often depends on the quality and usefulness of information and analysis made available to Congress.” The report describes the overwhelming amount of information received by members of Congress, few of whom have “substantial training or experience” in science and technology. Making this information understandable and useful is the role of the Office of Technology Assessment, the Congressional Research Service, the General Accounting Office, and the Congressional Budget Office.

Introduction of new process technology into the wastewater treatment sector.

PubMed

Parker, Denny S

2011-06-01

Innovative wastewater treatment technologies are developed to respond to changing regulatory requirements, increase efficiency, and enhance sustainability or to reduce capital or operating costs. Drawing from experience of five successful new process introductions from both the inventor/developer's and adopter's viewpoints coupled with the application of marketing analysis tools (an S curve), the phases of new technology market penetration can be identified along with the influence of market drivers, marketing, patents and early adopters. The analysis is used to identify measures that have increased the capture of benefits from new technology introduction. These have included funding by the government for research and demonstrations, transparency of information, and the provision of independent technology evaluations. To reduce the barriers and speed the introduction of new technology, and thereby harvest the full benefits from it, our industry must develop mechanisms for sharing risks and any consequences of failure more broadly than just amongst the early adopters. WEF and WERF will continue to have the central role in providing reliable information networks and independent technology evaluations.

Supply Chain Sustainability Analysis of Whole Algae Hydrothermal Liquefaction and Upgrading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pegallapati, Ambica Koushik; Dunn, Jennifer B.; Frank, Edward D.

2015-04-01

The Department of Energy's Bioenergy Technology Office (BETO) collaborates with a wide range of institutions towards the development and deployment of biofuels and bioproducts. To facilitate this effort, BETO and its partner national laboratories develop detailed techno-economic assessments (TEA) of biofuel production technologies as part of the development of design cases and state of technology (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand,more » an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available.« less

The utilization of information technology in biomedicine

NASA Astrophysics Data System (ADS)

Isaev, E. A.; Tarasov, P. A.

2017-01-01

Biomedicine is a branch of medicine that studies the human body, its structure and function in health and disease, pathological condition, methods of diagnosis, treatment and correction [1]. At the moment, to solve their diverse problems associated with the collection, storage, and data analysis, process modeling, biomedicine extensively uses modern technical equipment. The goal of this article - to make a brief analysis of existing technologies (big data, mobile and cloud technologies), in terms of their applicability to the needs of biomedicine.

Operationalising United Nations Security Council Resolution 1325 within the Australian Defence Force

DTIC Science & Technology

2016-01-01

Hutchinson Joint & Operations Analysis Division Defence Science and Technology Group DST- Group -GD-0909 ABSTRACT This literature...LIMITATION UNCLASSIFIED UNCLASSIFIED Published by Joint & Operations Analysis Division Defence Science and Technology Group 506 Lorimer St...This page intentionally blank UNCLASSIFIED DST- Group -GD-0909 UNCLASSIFIED Contents 1. INTRODUCTION

Spaceborne power systems preference analyses. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Smith, J. H.; Feinberg, A.; Miles, R. F., Jr.

1985-01-01

Sixteen alternative spaceborne nuclear power system concepts were ranked using multiattribute decision analysis to identify promising concepts for further technology development. Four groups interviewed were: safety, systems definition and design, technology assessment, and mission analysis. The ranking results were consistent from group and for different utility function models for individuals.

40 CFR 89.118 - Deterioration factors and service accumulation.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., subsystems, or components selected by the manufacturer under § 89.117(d). The manufacturer shall describe the... must be based on good engineering judgment. (iii) Engineering analysis for established technologies. (A) In the case where an engine family uses established technology, an analysis based on good engineering...

40 CFR 89.118 - Deterioration factors and service accumulation.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., subsystems, or components selected by the manufacturer under § 89.117(d). The manufacturer shall describe the... must be based on good engineering judgment. (iii) Engineering analysis for established technologies. (A) In the case where an engine family uses established technology, an analysis based on good engineering...

40 CFR 89.118 - Deterioration factors and service accumulation.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., subsystems, or components selected by the manufacturer under § 89.117(d). The manufacturer shall describe the... must be based on good engineering judgment. (iii) Engineering analysis for established technologies. (A) In the case where an engine family uses established technology, an analysis based on good engineering...

40 CFR 89.118 - Deterioration factors and service accumulation.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., subsystems, or components selected by the manufacturer under § 89.117(d). The manufacturer shall describe the... must be based on good engineering judgment. (iii) Engineering analysis for established technologies. (A) In the case where an engine family uses established technology, an analysis based on good engineering...

40 CFR 89.118 - Deterioration factors and service accumulation.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., subsystems, or components selected by the manufacturer under § 89.117(d). The manufacturer shall describe the... must be based on good engineering judgment. (iii) Engineering analysis for established technologies. (A) In the case where an engine family uses established technology, an analysis based on good engineering...

Digital Radiographic Image Processing and Analysis.

PubMed

Yoon, Douglas C; Mol, André; Benn, Douglas K; Benavides, Erika

2018-07-01

This article describes digital radiographic imaging and analysis from the basics of image capture to examples of some of the most advanced digital technologies currently available. The principles underlying the imaging technologies are described to provide a better understanding of their strengths and limitations. Copyright © 2018 Elsevier Inc. All rights reserved.

Microcomputers and Stimulus Control: From the Laboratory to the Classroom.

ERIC Educational Resources Information Center

LeBlanc, Judith M.; And Others

1985-01-01

The need for developing a technology of teaching that equals current sophistication of microcomputer technology is addressed. The importance of principles of learning and behavior analysis is emphasized. Potential roles of stimulus control and precise error analysis in educational program development and in prescription of specific learning…

Optimization, an Important Stage of Engineering Design

ERIC Educational Resources Information Center

Kelley, Todd R.

2010-01-01

A number of leaders in technology education have indicated that a major difference between the technological design process and the engineering design process is analysis and optimization. The analysis stage of the engineering design process is when mathematical models and scientific principles are employed to help the designer predict design…

STEM: Science Technology Engineering Mathematics. State-Level Analysis

ERIC Educational Resources Information Center

Carnevale, Anthony P.; Smith, Nicole; Melton, Michelle

2011-01-01

The science, technology, engineering, and mathematics (STEM) state-level analysis provides policymakers, educators, state government officials, and others with details on the projections of STEM jobs through 2018. This report delivers a state-by-state snapshot of the demand for STEM jobs, including: (1) The number of forecast net new and…

Web-based bioinformatics workflows for end-to-end RNA-seq data computation and analysis in agricultural animal species

USDA-ARS?s Scientific Manuscript database

Remarkable advances in next-generation sequencing (NGS) technologies, bioinformatics algorithms, and computational technologies have significantly accelerated genomic research. However, complicated NGS data analysis still remains as a major bottleneck. RNA-seq, as one of the major area in the NGS fi...

75 FR 51272 - Proposed Collection; Comment Request; STAR METRICS-Science and Technology in America's...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-19

... data collection projects, the Office of Science Policy Analysis (OSPA), the National Institutes of..., Health Science Policy Analyst, Office of Science and Technology Policy, OSP, OD; NIH, Building 1, Room... this publication. Dated: August 12, 2010. Lynn D. Hudson, Director, Office of Science Policy Analysis...

The Design of Lessons Using Mathematics Analysis Software to Support Multiple Representations in Secondary School Mathematics

ERIC Educational Resources Information Center

Pierce, Robyn; Stacey, Kaye; Wander, Roger; Ball, Lynda

2011-01-01

Current technologies incorporating sophisticated mathematical analysis software (calculation, graphing, dynamic geometry, tables, and more) provide easy access to multiple representations of mathematical problems. Realising the affordances of such technology for students' learning requires carefully designed lessons. This paper reports on design…

Technological Literacy Learning with Cumulative and Stepwise Integration of Equations into Electrical Circuit Diagrams

ERIC Educational Resources Information Center

Ozogul, G.; Johnson, A. M.; Moreno, R.; Reisslein, M.

2012-01-01

Technological literacy education involves the teaching of basic engineering principles and problem solving, including elementary electrical circuit analysis, to non-engineering students. Learning materials on circuit analysis typically rely on equations and schematic diagrams, which are often unfamiliar to non-engineering students. The goal of…

The Impact of Information Technology on Organizations: Implications for Organizational Integration and the Management of Information Technology.

DTIC Science & Technology

1998-03-01

and role model for its mission: "To be a great company by the year 2000 - to be to the cycling industry what Nike is to athletic shoes and Apple is to...position in industry by using three analytical techniques: strength, weaknesses, opportunities, and threats ( SWOT ) analysis; strategic cost...analysis; and competitive strength assessment. SWOT analysis shows a company’s internal and external factors. SWOT analysis provides a quick way for an

Science and Technology for Communication and Persuasion Abroad: Gap Analysis and Survey

DTIC Science & Technology

2012-03-01

technology are heavily influenced by studying technology use in the West—which, some argue, biases the field toward individualist rather than collectivist ...serious games, particularly for non-Western cultures , and to develop new technologies to that end. Such investment should include immersive virtual...environments, which favor different strategies of influence than text-based environments.27 Rilla Khaled, " Culturally -Relevant Persuasive Technology

NASA Earth Science Mission Control Center Enterprise Emerging Technology Study Study (MCC Technology Study)

NASA Technical Reports Server (NTRS)

Smith, Dan; Horan, Stephen; Royer, Don; Sullivan, Don; Moe, Karen

2015-01-01

This paper reports on the results of the study to identify technologies that could have a significant impact on Earth Science mission operations when looking out at the 5-15 year horizon (through 2025). The potential benefits of the new technologies will be discussed, as well as recommendations for early research and development, prototyping, or analysis for these technologies.

Helicopter Dynamic Performance Program. Volume 2. User’s Manual

DTIC Science & Technology

1980-07-01

Technologies Corporation Stratford, Connecticut 06602 July 1980 Final Report / • ., . Approved for public release; I distribution unlimited. ; A - Prepared...for : APPLIED TECHNOLOGY LABORATORY U. S. ARMY RESEARCH AND TECHNOLOGY LABORATORIES (AVRADCOM) Fort Eustis, Va. 23604 80 8 27 D APPLIED TECHNOLOGY ... Technology Division. Technic31 review of this report was also pro- vided by Messrs. W_ A. Pleasants of Design Integration and Analysis Technical Area

Addressing the Nets for Students through Constructivist Technology Use in K-12 Classrooms

ERIC Educational Resources Information Center

Niederhauser, Dale S.; Lindstrom, Denise L.

2006-01-01

The National Educational Technology Standards for Students promote constructivist technology use for K-12 students in U.S. schools. In this study, researchers reported on 716 cases in which teachers described technology-based activities they conducted with their students. Narrative analysis was used to examine case transcripts relative to the…

Needed Actions within Defense Acquisitions Based on a Forecast of Future Mobile Information and Communications Technologies Deployed in Austere Environments

DTIC Science & Technology

2013-03-01

Deshmukh , and Vrat (2002) 30 performed an analysis to match forecasting techniques with specific technologies. In this study, the authors found...Technological Forecasting and Social Change, 79, 744-765. Mishra, S., Deshmukh , S., & Vrat, P. (2002). Matching of Technological Forecasting Technique to

Technology in Nonformal Education: A Critical Appraisal. Issues in Nonformal Education No. 2.

ERIC Educational Resources Information Center

Evans, David R.

In analyzing efforts to utilize technology in nonformal education programs, the applied communications aspects of instructional technology are most relevant, and locus of control and the technology of educational organization are two major components of analysis. Growing out of these components is the increasing recognition that educational…

Sequencing Technologies Panel at SFAF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turner, Steve; Fiske, Haley; Knight, Jim

2010-06-02

From left to right: Steve Turner of Pacific Biosciences, Haley Fiske of Illumina, Jim Knight of Roche, Michael Rhodes of Life Technologies and Peter Vander Horn of Life Technologies' Single Molecule Sequencing group discuss new sequencing technologies and applications on June 2, 2010 at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM

Persistence Factors of Women in Information Technology--A Multiple Case Study Analysis

ERIC Educational Resources Information Center

Hua, David M.

2010-01-01

Women have historically been underrepresented in the field of information technology. The literature related to the underrepresentation of women in information technology has focused on developing strategies for attracting more females into the industry. Despite these efforts, the number of women in information technology has been declining. The…

A Systematic Review of the Use of LENA Technology

ERIC Educational Resources Information Center

Wang, Ye; Hartman, Maria; Aziz, Nurul Akmar Abdul; Arora, Sonia; Shi, Lingyun; Tunison, Ellie

2017-01-01

The authors systematically reviewed peer-reviewed studies done with LENA (Language ENvironment Analysis) technology, guided by three research questions: (a) What types of studies have been conducted, and with which populations, since the launch of LENA technology?; (b) What challenges related to use of LENA technology were identified?; and (c)…

20 Years of Technology and Language Assessment in "Language Learning & Technology"

ERIC Educational Resources Information Center

Chapelle, Carol A.; Voss, Erik

2016-01-01

This review article provides an analysis of the research from the last two decades on the theme of technology and second language assessment. Based on an examination of the assessment scholarship published in "Language Learning & Technology" since its launch in 1997, we analyzed the review articles, research articles, book reviews,…

Thermal Deformation and RF Performance Analyses for the SWOT Large Deployable Ka-Band Reflectarray

NASA Technical Reports Server (NTRS)

Fang, H.; Sunada, E.; Chaubell, J.; Esteban-Fernandez, D.; Thomson, M.; Nicaise, F.

2010-01-01

A large deployable antenna technology for the NASA Surface Water and Ocean Topography (SWOT) Mission is currently being developed by JPL in response to NRC Earth Science Tier 2 Decadal Survey recommendations. This technology is required to enable the SWOT mission due to the fact that no currently available antenna is capable of meeting SWOT's demanding Ka-Band remote sensing requirements. One of the key aspects of this antenna development is to minimize the effect of the on-orbit thermal distortion to the antenna RF performance. An analysis process which includes: 1) the on-orbit thermal analysis to obtain the temperature distribution; 2) structural deformation analysis to get the geometry of the antenna surface; and 3) the RF performance with the given deformed antenna surface has been developed to accommodate the development of this antenna technology. The detailed analysis process and some analysis results will be presented and discussed by this paper.

[Globalization of acupuncture technology innovation: a quantitative analysis based on acupuncture patents in the U.S.A].

PubMed

Pan, Wei; Hu, Yuan-Jia; Wang, Yi-Tao

2011-08-01

The structure of international flow of acupuncture knowledge was explored in this article so as to promote the globalization of acupuncture technology innovation. Statistical methods were adopted to reveal geographical distribution of acupuncture patents in the U.S.A. and the influencing factors of cumulative advantage of acupuncture techniques as well as innovation value of application of acupuncture patents. Social network analysis was also utilized to establish a global innovation network of acupuncture technology. The result shows that the cumulative strength on acupuncture technology correlates with the patent retention period. The innovative value of acupuncture invention correlates with the frequency of patent citation. And the U. S. A. and Canada seize central positions in the global acupuncture information and technology delivery system.

Exploration Life Support Technology Development for Lunar Missions

NASA Technical Reports Server (NTRS)

Ewert, Michael K.; Barta, Daniel J.; McQuillan, Jeffrey

2009-01-01

Exploration Life Support (ELS) is one of NASA's Exploration Technology Development Projects. ELS plans, coordinates and implements the development of new life support technologies for human exploration missions as outlined in NASA's Vision for Space Exploration. ELS technology development currently supports three major projects of the Constellation Program - the Orion Crew Exploration Vehicle (CEV), the Altair Lunar Lander and Lunar Surface Systems. ELS content includes Air Revitalization Systems (ARS), Water Recovery Systems (WRS), Waste Management Systems (WMS), Habitation Engineering, Systems Integration, Modeling and Analysis (SIMA), and Validation and Testing. The primary goal of the ELS project is to provide different technology options to Constellation which fill gaps or provide substantial improvements over the state-of-the-art in life support systems. Since the Constellation missions are so challenging, mass, power, and volume must be reduced from Space Shuttle and Space Station technologies. Systems engineering analysis also optimizes the overall architecture by considering all interfaces with the life support system and potential for reduction or reuse of resources. For long duration missions, technologies which aid in closure of air and water loops with increased reliability are essential as well as techniques to minimize or deal with waste. The ELS project utilizes in-house efforts at five NASA centers, aerospace industry contracts, Small Business Innovative Research contracts and other means to develop advanced life support technologies. Testing, analysis and reduced gravity flight experiments are also conducted at the NASA field centers. This paper gives a current status of technologies under development by ELS and relates them to the Constellation customers who will eventually use them.

Multi-Metric Sustainability Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cowlin, Shannon; Heimiller, Donna; Macknick, Jordan

2014-12-01

A readily accessible framework that allows for evaluating impacts and comparing tradeoffs among factors in energy policy, expansion planning, and investment decision making is lacking. Recognizing this, the Joint Institute for Strategic Energy Analysis (JISEA) funded an exploration of multi-metric sustainability analysis (MMSA) to provide energy decision makers with a means to make more comprehensive comparisons of energy technologies. The resulting MMSA tool lets decision makers simultaneously compare technologies and potential deployment locations.

Smart roadside initiative gap analysis : trends in trucking technology utilization webinar summary.

DOT National Transportation Integrated Search

2014-04-01

The American Transportation Research Institute (ATRI) held the Trends in Trucking Technology Utilization webinar on January 23, 2014 in order to obtain industry feedback on technologies related to the Smart Roadside Initiative (SRI). During the...

40 CFR 94.218 - Deterioration factor determination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... family. (b) Calculation procedures—(1) For engines not utilizing aftertreatment technology (e.g... technology (e.g., catalyst). For each applicable emission constituent, a multiplicative deterioration factor.... (iii) Engineering analysis for established technologies. In the case where an engine family uses...

Breeding nursery tissue collection for possible genomic analysis

USDA-ARS?s Scientific Manuscript database

Phenotyping is considered a major bottleneck in breeding programs. With new genomic technologies, high throughput genotype schemes are constantly being developed. However, every genomic technology requires phenotypic data to inform prediction models generated from the technology. Forage breeders con...

Biosensing Technologies for Mycobacterium tuberculosis Detection: Status and New Developments

PubMed Central

Zhou, Lixia; He, Xiaoxiao; He, Dinggeng; Wang, Kemin; Qin, Dilan

2011-01-01

Biosensing technologies promise to improve Mycobacterium tuberculosis (M. tuberculosis) detection and management in clinical diagnosis, food analysis, bioprocess, and environmental monitoring. A variety of portable, rapid, and sensitive biosensors with immediate “on-the-spot” interpretation have been developed for M. tuberculosis detection based on different biological elements recognition systems and basic signal transducer principles. Here, we present a synopsis of current developments of biosensing technologies for M. tuberculosis detection, which are classified on the basis of basic signal transducer principles, including piezoelectric quartz crystal biosensors, electrochemical biosensors, and magnetoelastic biosensors. Special attention is paid to the methods for improving the framework and analytical parameters of the biosensors, including sensitivity and analysis time as well as automation of analysis procedures. Challenges and perspectives of biosensing technologies development for M. tuberculosis detection are also discussed in the final part of this paper. PMID:21437177

Entry, Descent and Landing Systems Analysis: Exploration Feed Forward Internal Peer Review Slide Package

NASA Technical Reports Server (NTRS)

Dwyer Cianciolo, Alicia M. (Editor)

2011-01-01

NASA senior management commissioned the Entry, Descent and Landing Systems Analysis (EDL-SA) Study in 2008 to identify and roadmap the Entry, Descent and Landing (EDL) technology investments that the agency needed to successfully land large payloads at Mars for both robotic and human-scale missions. Year 1 of the study focused on technologies required for Exploration-class missions to land payloads of 10 to 50 mt. Inflatable decelerators, rigid aeroshell and supersonic retro-propulsion emerged as the top candidate technologies. In Year 2 of the study, low TRL technologies identified in Year 1, inflatables aeroshells and supersonic retropropulsion, were combined to create a demonstration precursor robotic mission. This part of the EDL-SA Year 2 effort, called Exploration Feed Forward (EFF), took much of the systems analysis simulation and component model development from Year 1 to the next level of detail.

Entry, Descent and Landing Systems Analysis Study: Phase 2 Report on Exploration Feed-Forward Systems

NASA Technical Reports Server (NTRS)

Dwyer Ciancolo, Alicia M.; Davis, Jody L.; Engelund, Walter C.; Komar, D. R.; Queen, Eric M.; Samareh, Jamshid A.; Way, David W.; Zang, Thomas A.; Murch, Jeff G.; Krizan, Shawn A.;

Status of the Combustion Devices Injector Technology Program at the NASA MSFC

NASA Technical Reports Server (NTRS)

Jones, Gregg; Protz, Christopher; Trinh, Huu; Tucker, Kevin; Nesman, Tomas; Hulka, James

2005-01-01

To support the NASA Space Exploration Mission, an in-house program called Combustion Devices Injector Technology (CDIT) is being conducted at the NASA Marshall Space Flight Center (MSFC) for the fiscal year 2005. CDIT is focused on developing combustor technology and analysis tools to improve reliability and durability of upper-stage and in-space liquid propellant rocket engines. The three areas of focus include injector/chamber thermal compatibility, ignition, and combustion stability. In the compatibility and ignition areas, small-scale single- and multi-element hardware experiments will be conducted to demonstrate advanced technological concepts as well as to provide experimental data for validation of computational analysis tools. In addition, advanced analysis tools will be developed to eventually include 3-dimensional and multi- element effects and improve capability and validity to analyze heat transfer and ignition in large, multi-element injectors.

Control of flexible structures

NASA Technical Reports Server (NTRS)

Russell, R. A.

1985-01-01

The requirements for future space missions indicate that many of these spacecraft will be large, flexible, and in some applications, require precision geometries. A technology program that addresses the issues associated with the structure/control interactions for these classes of spacecraft is discussed. The goal of the NASA control of flexible structures technology program is to generate a technology data base that will provide the designer with options and approaches to achieve spacecraft performance such as maintaining geometry and/or suppressing undesired spacecraft dynamics. This technology program will define the appropriate combination of analysis, ground testing, and flight testing required to validate the structural/controls analysis and design tools. This work was motivated by a recognition that large minimum weight space structures will be required for many future missions. The tools necessary to support such design included: (1) improved structural analysis; (2) modern control theory; (3) advanced modeling techniques; (4) system identification; and (5) the integration of structures and controls.

Characterization of biosurfactant produced by petrofilic bacteria isolated from hydrocarbon impacted soil and its potential application in bioremediation

NASA Astrophysics Data System (ADS)

Arsyah, D. M.; Kardena, E.; Helmy, Q.

2018-01-01

The study adopts a multi-level perspective in technology transition to analyse how the transition process in the development of geothermal energy in Indonesia is able to compete against the incumbent fossil-fuelled energy sources. Three levels of multi-level perspective are socio-technical landscape (ST-landscape), socio-technical regime (ST-regime) and niche innovations in Indonesia geothermal development. The identification, mapping and analysis of the dynamic relationship between each level are the important pillars of the multi-level perspective framework. The analysis considers the set of rules, actors and controversies that may arise in the technological transition process. The identified geothermal resource risks are the basis of the emerging geothermal technological innovations in Indonesian geothermal. The analysis of this study reveals the transition pathway, which yields a forecast for the Indonesian geothermal technology transition in the form of scenarios and probable impacts.

Medical technology as a key driver of rising health expenditure: disentangling the relationship

PubMed Central

Sorenson, Corinna; Drummond, Michael; Bhuiyan Khan, Beena

2013-01-01

Health care spending has risen steadily in most countries, becoming a concern for decision-makers worldwide. Commentators often point to new medical technology as the key driver for burgeoning expenditures. This paper critically appraises this conjecture, based on an analysis of the existing literature, with the aim of offering a more detailed and considered analysis of this relationship. Several databases were searched to identify relevant literature. Various categories of studies (eg, multivariate and cost-effectiveness analyses) were included to cover different perspectives, methodological approaches, and issues regarding the link between medical technology and costs. Selected articles were reviewed and relevant information was extracted into a standardized template and analyzed for key cross-cutting themes, ie, impact of technology on costs, factors influencing this relationship, and methodological challenges in measuring such linkages. A total of 86 studies were reviewed. The analysis suggests that the relationship between medical technology and spending is complex and often conflicting. Findings were frequently contingent on varying factors, such as the availability of other interventions, patient population, and the methodological approach employed. Moreover, the impact of technology on costs differed across technologies, in that some (eg, cancer drugs, invasive medical devices) had significant financial implications, while others were cost-neutral or cost-saving. In light of these issues, we argue that decision-makers and other commentators should extend their focus beyond costs solely to include consideration of whether medical technology results in better value in health care and broader socioeconomic benefits. PMID:23807855

Technological, Pedagogical, and Content Knowledge (TPACK): An Educational Landscape for Tertiary Science Faculty

NASA Astrophysics Data System (ADS)

Lavadia, Linda

Earlier studies concluded that technology's strength is in supporting student learning rather than as an instrument for content delivery (Angeli & Valanides, 2014). Current research espouses the merits of the Technological Pedagogical Content Knowledge (TPACK) framework as a guide for educators' reflections about technology integration within the context of content and instructional practice. Grounded by two theoretical frameworks, TPACK (Mishra & Koehler, 2006; 2008) and Rogers' (1983, 1995) theory of diffusion of innovation, the purpose of this mixed-methods research was two-fold: to explore the perceived competencies of tertiary science faculty at higher education institutions with respect to their integration of technology within the constructs of pedagogical practice and content learning and to analyze whether these perceived competencies may serve as predictive factors for technology adoption level. The literature review included past research that served as models for the Sci-TPACK instrument. Twenty-nine professors of tertiary science courses participated in an online Likert survey, and four professors provided in-depth interviews on their TPACK practices. Quantitative analysis of data consisted of descriptive and reliability statistics, calculations of means for each of the seven scales or domains of TPACK, and regression analysis. Open-ended questions on the Likert survey and individual interviews provided recurrent themes of the qualitative data. Final results revealed that the participants integrate technology into pedagogy and content through a myriad of TPACK practices. Regression analysis supported perceived TPACK competencies as predictive factors for technology adoption level.

Research of the application of the new communication technologies for distribution automation

NASA Astrophysics Data System (ADS)

Zhong, Guoxin; Wang, Hao

2018-03-01

Communication network is a key factor of distribution automation. In recent years, new communication technologies for distribution automation have a rapid development in China. This paper introduces the traditional communication technologies of distribution automation and analyse the defects of these traditional technologies. Then this paper gives a detailed analysis on some new communication technologies for distribution automation including wired communication and wireless communication and then gives an application suggestion of these new technologies.

Erbium Laser Technology vs Traditional Drilling for Caries Removal: A Systematic Review with Meta-Analysis.

PubMed

Tao, Siying; Li, Lan; Yuan, He; Tao, Sibei; Cheng, Yiming; He, Libang; Li, Jiyao

2017-12-01

The study aimed to assess the efficacy of erbium laser technology compared with traditional drilling for caries removal. A systematic search was conducted through Medline via PubMed, Embase, Cochrane databases, CNKI till December 2016. Randomised controlled trials, quasi-randomized controlled trials, or controlled clinical trials with data comparing the efficacy of erbium laser technology versus traditional drilling for caries removal were included. Fourteen studies were selected in our meta-analysis. Erbium laser technology showed an increased time when removing caries compared with drilling (mean difference: 3.48, 95% confidence interval: 1.90-5.06, P < .0001). However, erbium laser technology reduced the requirement for local anesthesia (risk ratio: 0.28, 95% confidence interval: 0.13-0.62, P = .002). Erbium laser technology was also not significantly different to traditional drilling with regard to restoration loss, pulpal vitality, and postoperative sensitivity. Erbium laser technology showed an increased time for cavity preparation compared with traditional drilling. However, erbium laser technology reduced the requirement for local anesthesia. There was no significant difference between erbium laser technology and traditional drilling regarding restoration loss, pulpal vitality, and postoperative sensitivity. Copyright © 2017 Elsevier Inc. All rights reserved.

Design and implementation of information visualization system on science and technology industry based on GIS

NASA Astrophysics Data System (ADS)

Wu, Xiaofang; Jiang, Liushi

2011-02-01

Usually in the traditional science and technology information system, the only text and table form are used to manage the data, and the mathematic statistics method is applied to analyze the data. It lacks for the spatial analysis and management of data. Therefore, GIS technology is introduced to visualize and analyze the information data on science and technology industry. Firstly, by using the developed platform-microsoft visual studio 2005 and ArcGIS Engine, the information visualization system on science and technology industry based on GIS is built up, which implements various functions, such as data storage and management, inquiry, statistics, chart analysis, thematic map representation. It can show the change of science and technology information from the space and time axis intuitively. Then, the data of science and technology in Guangdong province are taken as experimental data and are applied to the system. And by considering the factors of humanities, geography and economics so on, the situation and change tendency of science and technology information of different regions are analyzed and researched, and the corresponding suggestion and method are brought forward in order to provide the auxiliary support for development of science and technology industry in Guangdong province.

Decision support for redesigning wastewater treatment technologies.

PubMed

McConville, Jennifer R; Künzle, Rahel; Messmer, Ulrike; Udert, Kai M; Larsen, Tove A

2014-10-21

This paper offers a methodology for structuring the design space for innovative process engineering technology development. The methodology is exemplified in the evaluation of a wide variety of treatment technologies for source-separated domestic wastewater within the scope of the Reinvent the Toilet Challenge. It offers a methodology for narrowing down the decision-making field based on a strict interpretation of treatment objectives for undiluted urine and dry feces and macroenvironmental factors (STEEPLED analysis) which influence decision criteria. Such an evaluation identifies promising paths for technology development such as focusing on space-saving processes or the need for more innovation in low-cost, energy-efficient urine treatment methods. Critical macroenvironmental factors, such as housing density, transportation infrastructure, and climate conditions were found to affect technology decisions regarding reactor volume, weight of outputs, energy consumption, atmospheric emissions, investment cost, and net revenue. The analysis also identified a number of qualitative factors that should be carefully weighed when pursuing technology development; such as availability of O&M resources, health and safety goals, and other ethical issues. Use of this methodology allows for coevolution of innovative technology within context constraints; however, for full-scale technology choices in the field, only very mature technologies can be evaluated.

An Analysis of NASA Technology Transfer. Degree awarded by Pennsylvania State Univ.

NASA Technical Reports Server (NTRS)

Bush, Lance B.

1996-01-01

A review of previous technology transfer metrics, recommendations, and measurements is presented within the paper. A quantitative and qualitative analysis of NASA's technology transfer efforts is performed. As a relative indicator, NASA's intellectual property performance is benchmarked against a database of over 100 universities. Successful technology transfer (commercial sales, production savings, etc.) cases were tracked backwards through their history to identify the key critical elements that lead to success. Results of this research indicate that although NASA's performance is not measured well by quantitative values (intellectual property stream data), it has a net positive impact on the private sector economy. Policy recommendations are made regarding technology transfer within the context of the documented technology transfer policies since the framing of the Constitution. In the second thrust of this study, researchers at NASA Langley Research Center were surveyed to determine their awareness of, attitude toward, and perception about technology transfer. Results indicate that although researchers believe technology transfer to be a mission of the Agency, they should not be held accountable or responsible for its performance. In addition, the researchers are not well educated about the mechanisms to perform, or policies regarding, technology transfer.

Technology concept in the view of Iranian nurses.

PubMed

Mehraban, Marzieh Adel; Hassanpour, Marzieh; Yazdannik, Ahmadreza; Ajami, Sima

2013-05-01

Over the years, the concept technology has modified, especially from the viewpoint of the development of scientific knowledge as well as the philosophical and artistic aspects. However, the concept of technology in nursing are still poorly understood. Only small qualitative studies, especially in Iran, have investigated this phenomenon and they just are about information technology. The aim of this study is to gain a better understanding of the concept of technology in the view of Iranian nurses. This study was qualitative explorative study which was done with a purposeful sampling of 23 nurses (staffs, supervisors and chief nurse managers) working in Isfahan hospitals. Unstructured interviews were including 13 individual interviews and 2 focused-group interviews. In addition to this, filed notes and memos were used in data collection. After this data transcribing was done and then conventional content analysis was used for data coding and classification. The results showed that there are various definitions for technology among nurses. In the view of nurses, technology means using new equipment, computers, information technology, etc). Data analysis revealed that nurses understand technology up to three main concepts: Change, Equipment and Knowledge. In deep overview on categories, we found that the most important concept about technology in nursing perspective is equipment. Therefore, it is necessary to develop deep understanding about the possible concepts technology among nurses. We suppose that technology concepts must be defined separately in all disciplines.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spoerri, Andy, E-mail: andy.spoerri@env.ethz.c; Lang, Daniel J.; Staeubli, Beat

Understanding technological change provides a crucial basis for governing sustainability transitions. In this paper we present an analysis of technological change using the example of Swiss thermal waste processing. In recent years, increased concerns about the low quality of residues from grate-firing systems led to the examination of alternative technologies. Yet despite clear indications of a potential better performance with respect to residue quality, none of these alternatives has been adopted. Based on a two-stage knowledge integration among 15 leading experts, in a retrospective analysis we identified factors that have significantly affected technological change in Swiss thermal waste processing. Thesemore » factors were then related to three technological options representing different types of technological change, i.e., from incremental improvements of the existing to the implementation of a new technology. The results indicate that technological change is currently in a technological lock-in and provide detailed insights on the causes. The lock-in results in the step-wise further development of the status quo grate-firing system despite its limitations for improving the residue qualities. Almost all factors (legal, economic, societal, technological) of the existing 'thermal waste management' system have been well adapted to the cost- and energy-efficient grate-firing technology, blocking innovative technologies from entering the Swiss market. In addition, pressures from the context, e.g., societal pressure related to landfill risks, have not been strong enough to promote non-incremental change.« less

Biosensors for Cell Analysis.

PubMed

Zhou, Qing; Son, Kyungjin; Liu, Ying; Revzin, Alexander

2015-01-01

Biosensors first appeared several decades ago to address the need for monitoring physiological parameters such as oxygen or glucose in biological fluids such as blood. More recently, a new wave of biosensors has emerged in order to provide more nuanced and granular information about the composition and function of living cells. Such biosensors exist at the confluence of technology and medicine and often strive to connect cell phenotype or function to physiological or pathophysiological processes. Our review aims to describe some of the key technological aspects of biosensors being developed for cell analysis. The technological aspects covered in our review include biorecognition elements used for biosensor construction, methods for integrating cells with biosensors, approaches to single-cell analysis, and the use of nanostructured biosensors for cell analysis. Our hope is that the spectrum of possibilities for cell analysis described in this review may pique the interest of biomedical scientists and engineers and may spur new collaborations in the area of using biosensors for cell analysis.

Plant phenomics: an overview of image acquisition technologies and image data analysis algorithms.

PubMed

Perez-Sanz, Fernando; Navarro, Pedro J; Egea-Cortines, Marcos

2017-11-01

The study of phenomes or phenomics has been a central part of biology. The field of automatic phenotype acquisition technologies based on images has seen an important advance in the last years. As with other high-throughput technologies, it addresses a common set of problems, including data acquisition and analysis. In this review, we give an overview of the main systems developed to acquire images. We give an in-depth analysis of image processing with its major issues and the algorithms that are being used or emerging as useful to obtain data out of images in an automatic fashion. © The Author 2017. Published by Oxford University Press.

Ultra Wideband Indoor Positioning Technologies: Analysis and Recent Advances †

PubMed Central

Alarifi, Abdulrahman; Al-Salman, AbdulMalik; Alsaleh, Mansour; Alnafessah, Ahmad; Al-Hadhrami, Suheer; Al-Ammar, Mai A.; Al-Khalifa, Hend S.

2016-01-01

In recent years, indoor positioning has emerged as a critical function in many end-user applications; including military, civilian, disaster relief and peacekeeping missions. In comparison with outdoor environments, sensing location information in indoor environments requires a higher precision and is a more challenging task in part because various objects reflect and disperse signals. Ultra WideBand (UWB) is an emerging technology in the field of indoor positioning that has shown better performance compared to others. In order to set the stage for this work, we provide a survey of the state-of-the-art technologies in indoor positioning, followed by a detailed comparative analysis of UWB positioning technologies. We also provide an analysis of strengths, weaknesses, opportunities, and threats (SWOT) to analyze the present state of UWB positioning technologies. While SWOT is not a quantitative approach, it helps in assessing the real status and in revealing the potential of UWB positioning to effectively address the indoor positioning problem. Unlike previous studies, this paper presents new taxonomies, reviews some major recent advances, and argues for further exploration by the research community of this challenging problem space. PMID:27196906

Ultra Wideband Indoor Positioning Technologies: Analysis and Recent Advances.

PubMed

Alarifi, Abdulrahman; Al-Salman, AbdulMalik; Alsaleh, Mansour; Alnafessah, Ahmad; Al-Hadhrami, Suheer; Al-Ammar, Mai A; Al-Khalifa, Hend S

2016-05-16

In recent years, indoor positioning has emerged as a critical function in many end-user applications; including military, civilian, disaster relief and peacekeeping missions. In comparison with outdoor environments, sensing location information in indoor environments requires a higher precision and is a more challenging task in part because various objects reflect and disperse signals. Ultra WideBand (UWB) is an emerging technology in the field of indoor positioning that has shown better performance compared to others. In order to set the stage for this work, we provide a survey of the state-of-the-art technologies in indoor positioning, followed by a detailed comparative analysis of UWB positioning technologies. We also provide an analysis of strengths, weaknesses, opportunities, and threats (SWOT) to analyze the present state of UWB positioning technologies. While SWOT is not a quantitative approach, it helps in assessing the real status and in revealing the potential of UWB positioning to effectively address the indoor positioning problem. Unlike previous studies, this paper presents new taxonomies, reviews some major recent advances, and argues for further exploration by the research community of this challenging problem space.

Noninvasive blood pressure measurement scheme based on optical fiber sensor

NASA Astrophysics Data System (ADS)

Liu, Xianxuan; Yuan, Xueguang; Zhang, Yangan

2016-10-01

Optical fiber sensing has many advantages, such as volume small, light quality, low loss, strong in anti-jamming. Since the invention of the optical fiber sensing technology in 1977, optical fiber sensing technology has been applied in the military, national defense, aerospace, industrial, medical and other fields in recent years, and made a great contribution to parameter measurement in the environment under the limited condition .With the rapid development of computer, network system, the intelligent optical fiber sensing technology, the sensor technology, the combination of computer and communication technology , the detection, diagnosis and analysis can be automatically and efficiently completed. In this work, we proposed a noninvasive blood pressure detection and analysis scheme which uses optical fiber sensor. Optical fiber sensing system mainly includes the light source, optical fiber, optical detector, optical modulator, the signal processing module and so on. wavelength optical signals were led into the optical fiber sensor and the signals reflected by the human body surface were detected. By comparing actual testing data with the data got by traditional way to measure the blood pressure we can establish models for predicting the blood pressure and achieve noninvasive blood pressure measurement by using spectrum analysis technology. Blood pressure measurement method based on optical fiber sensing system is faster and more convenient than traditional way, and it can get accurate analysis results in a shorter period of time than before, so it can efficiently reduce the time cost and manpower cost.

[Relevance of big data for molecular diagnostics].

PubMed

Bonin-Andresen, M; Smiljanovic, B; Stuhlmüller, B; Sörensen, T; Grützkau, A; Häupl, T

2018-04-01

Big data analysis raises the expectation that computerized algorithms may extract new knowledge from otherwise unmanageable vast data sets. What are the algorithms behind the big data discussion? In principle, high throughput technologies in molecular research already introduced big data and the development and application of analysis tools into the field of rheumatology some 15 years ago. This includes especially omics technologies, such as genomics, transcriptomics and cytomics. Some basic methods of data analysis are provided along with the technology, however, functional analysis and interpretation requires adaptation of existing or development of new software tools. For these steps, structuring and evaluating according to the biological context is extremely important and not only a mathematical problem. This aspect has to be considered much more for molecular big data than for those analyzed in health economy or epidemiology. Molecular data are structured in a first order determined by the applied technology and present quantitative characteristics that follow the principles of their biological nature. These biological dependencies have to be integrated into software solutions, which may require networks of molecular big data of the same or even different technologies in order to achieve cross-technology confirmation. More and more extensive recording of molecular processes also in individual patients are generating personal big data and require new strategies for management in order to develop data-driven individualized interpretation concepts. With this perspective in mind, translation of information derived from molecular big data will also require new specifications for education and professional competence.

A Demonstration of Big Data Technology for Data Intensive Earth Science (Invited)

NASA Astrophysics Data System (ADS)

Kuo, K.; Clune, T.; Ramachandran, R.; Rushing, J.; Fekete, G.; Lin, A.; Doan, K.; Oloso, A. O.; Duffy, D.

2013-12-01

Big Data technologies exhibit great potential to change the way we conduct scientific investigations, especially analysis of voluminous and diverse data sets. Obviously, not all Big Data technologies are applicable to all aspects of scientific data analysis. Our NASA Earth Science Technology Office (ESTO) Advanced Information Systems Technology (AIST) project, Automated Event Service (AES), pioneers the exploration of Big Data technologies for data intensive Earth science. Since Earth science data are largely stored and manipulated in the form of multidimensional arrays, the project first evaluates array performance of several candidate Big Data technologies, including MapReduce (Hadoop), SciDB, and a custom-built Polaris system, which have one important feature in common: shared nothing architecture. The evaluation finds SicDB to be the most promising. In this presentation, we demonstrate SciDB using a couple of use cases, each operating on a distinct data set in the regular latitude-longitude grid. The first use case is the discovery and identification of blizzards using NASA's Modern Era Retrospective-analysis for Research and Application (MERRA) data sets. The other finds diurnal signals in the same 8-year period using SSMI data from three different instruments with different equator crossing times by correlating their retrieved parameters. In addition, the AES project is also developing a collaborative component to enable the sharing of event queries and results. Preliminary capabilities will be presented as well.

Effectiveness and feasibility of utilizing E4D technology as a teaching tool in a preclinical dental education environment.

PubMed

Callan, Richard S; Palladino, Christie L; Furness, Alan R; Bundy, Emily L; Ange, Brittany L

2014-10-01

Recent efforts have been directed towards utilizing CAD/CAM technology in the education of future dentists. The purpose of this pilot study was to investigate the feasibility of implementing CAD/CAM technology in instruction on preparing a tooth for restoration. Students at one dental school were assigned access to CAD/CAM technology vs. traditional preparation methods in a randomized, crossover design. In a convenience sample of a second-year class, seventy-six of the seventy-nine students volunteered to participate, for a response rate of 96 percent. Two analyses were performed on this pilot data: a primary effectiveness analysis comparing students' competency exam scores by intervention group (intention-to-treat analysis) and a secondary efficacy analysis comparing competency exam scores among students who reported using CAD/CAM versus those who did not. The effectiveness analysis showed no difference in outcomes by intervention group assignment. While student survey results indicated interest in utilizing the technology, the actual utilization rate was much less than one might anticipate, yielding a sample size that limited statistical power. The secondary analysis demonstrated higher mean competency exam scores for students reporting use of CAD/CAM compared to those who did not use the technology, but these results did not reach statistical significance (p=0.075). Prior research has investigated the efficacy of CAD/CAM in a controlled educational trial, but this study adds to the literature by investigating student use of CAD/CAM in a real-world, self-study fashion. Further studies should investigate ways in which to increase student utilization of CAD/CAM and whether or not increased utilization, with a larger sample size, would yield significant outcomes.

A Meta-Analysis Method to Advance Design of Technology-Based Learning Tool: Combining Qualitative and Quantitative Research to Understand Learning in Relation to Different Technology Features

ERIC Educational Resources Information Center

Zhang, Lin

2014-01-01

Educators design and create various technology tools to scaffold students' learning. As more and more technology designs are incorporated into learning, growing attention has been paid to the study of technology-based learning tool. This paper discusses the emerging issues, such as how can learning effectiveness be understood in relation to…

Turnaround Operations Analysis for OTV. Volume 3: Technology Development Plan

NASA Technical Reports Server (NTRS)

1988-01-01

An integrated technology development plan for the technologies required to process both GBOTVs and SBOTVs are described. The plan includes definition of the tests and experiments to be accomplished on the ground, in a Space Shuttle Sortie Mission, on an Expendable Launch Vehicle, or at the Space Station as a Technology Development Mission (TDM). The plan reflects and accommodates current and projected research and technology programs where appropriate.

Prototype Space Technology Hall of Fame exhibit at Technology 2003: Analysis of data from computer-based questionaire

NASA Technical Reports Server (NTRS)

Ewell, Robert N.

1994-01-01

The U.S. Space Foundation displayed its prototype Space Technology Hall of Fame exhibit design at the Technology 2003 conference in Anaheim, CA, December 7-9, 1993. In order to sample public opinion on space technology in general and the exhibit in particular, a computer-based survey was set up as a part of the display. The data collected was analyzed.

ULTROX INTERNATIONAL ULTRAVIOLET RADIATION/OXIDATION TECHNOLOGY APPLICATIONS ANALYSIS REPORT

EPA Science Inventory

In support of the U.S. Environmental Protection Agency’s (EPA) Superfund Innovative Technology Evaluation (SITE) Program, this report evaluates the Ultrox International technology and its applicability as an on-site treatment method for contaminated groundwater. The ULTROX® techn...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aabakken, J.

This report, prepared by NREL's Strategic Energy Analysis Center, includes up-to-date information on power technologies, including complete technology profiles. The data book also contains charts on electricity restructuring, power technology forecasts, electricity supply, electricity capability, electricity generation, electricity demand, prices, economic indicators, environmental indicators, and conversion factors.

Technology Transfer: Technocultures, Power and Communication--The Australian Experience.

ERIC Educational Resources Information Center

More, Elizabeth; Irwin, Harry

1995-01-01

Discusses issues of communication and power in the organizational dimensions of international technology transfer, including technoculture differences and strategic political alliances. Theoretical discussion is supplemented by analysis of international technology transfer activities involving Australian participation in the aerospace and…

EPOC WATER INC. MICROFILTRATION TECHNOLOGY - APPLICATIONS ANALYSIS REPORT

EPA Science Inventory

This document is an evaluation of the performance of the EPOC Water, Inc. Microfiltration Technology and its applicability as a treatment technique for water contaminated with metals. oth the technical aspects arid the economics of this technology were examined. Operational data ...

Stalking The Silent Killers.

ERIC Educational Resources Information Center

DeYoung, H. Garrett

1983-01-01

New technologies have been developed to diagnose such disorders as cancer, heart disease, and defects of the newborn in presymptomatic stages. Several technologies, including amniocentesis, radioimmunoassay, enzyme immunoassay, multichannel analysis and others are discussed. Development of these technologies and issues related to their use are…

Our Way Into the Twenty-First Century: The Meaning of Educational Technology

ERIC Educational Resources Information Center

Muller, Gerhard K.

1969-01-01

Discusses the strongly connotative meanings of educational technology, the role social attitudes play in changing educational philosophies and methods, and suggests a systematic frame of analysis for rational development of new educational technology in West Germany. (DE)

Using Research to Inform Learning Technology Practice and Policy: A Qualitative Analysis of Student Perspectives

ERIC Educational Resources Information Center

Russell, Carol; Malfroy, Janne; Gosper, Maree; McKenzie, Jo

2014-01-01

As learning technologies are now integral to most higher education student learning experiences, universities need to make strategic choices about what technologies to adopt and how to best support and develop the use of these technologies, particularly in a climate of limited resources. Information from students is therefore a valuable…

An Analysis of Teacher and School Administrator Technology Beliefs and Skills as They Enter into a High Achieving Schools Program

ERIC Educational Resources Information Center

Hildebrand, Shelly Marie

2009-01-01

Teachers and administrators possess varied technology abilities and beliefs. In a study by Williams, Atkinson, Cate, and O'Hair (2008), technology integration and learning community development were positively related. As the teachers and administrators engaged in learning community development and technology integration substantive school…

Technology as "A Human Practice with Social Meaning:" A New Scenery for Engineering Education

ERIC Educational Resources Information Center

Gana, Maria Teresa Santander; Fuentes, Luis Antonio Trejo

2006-01-01

In a world sustained and interconnected by technology, people make choices. Therefore, they have to consider that technology is subject to analysis and interpretation because it is designed by humans with varied histories, experiences and cultures. To generate an understanding of the technological phenomenon, this article proposes to view the…

Analyzing the Discourse of Chais Conferences for the Study of Innovation and Learning Technologies via a Data-Driven Approach

ERIC Educational Resources Information Center

Silber-Varod, Vered; Eshet-Alkalai, Yoram; Geri, Nitza

2016-01-01

The current rapid technological changes confront researchers of learning technologies with the challenge of evaluating them, predicting trends, and improving their adoption and diffusion. This study utilizes a data-driven discourse analysis approach, namely culturomics, to investigate changes over time in the research of learning technologies. The…

An Investigation of Factors Influencing Student Use of Technology in K-12 Classrooms Using Path Analysis

ERIC Educational Resources Information Center

Ritzhaupt, Albert D.; Dawson, Kara; Cavanaugh, Cathy

2012-01-01

The purpose of this research was to examine the effects of teachers' characteristics, school characteristics, and contextual characteristics on classroom technology integration and teacher use of technology as mediators of student use of technology. A research-based path model was designed and tested based on data gathered from 732 teachers from…

Analysis of Preservice Teacher and Instructor Technology Uses and Beliefs

ERIC Educational Resources Information Center

Salentiny, Adrienne M.

2012-01-01

In our technology-immersed society in which information is central to the economy, citizens should be fluent with technology and possess 21 st century skills that support responsible and effective technology use (e.g., Lin, 2000; P21, 2009). Given the role of public education in creating citizenry with the skills society needs, these qualities…

Understanding Student Teachers' Behavioural Intention to Use Technology: Technology Acceptance Model (TAM) Validation and Testing

ERIC Educational Resources Information Center

Wong, Kung-Teck; Osman, Rosma bt; Goh, Pauline Swee Choo; Rahmat, Mohd Khairezan

2013-01-01

This study sets out to validate and test the Technology Acceptance Model (TAM) in the context of Malaysian student teachers' integration of their technology in teaching and learning. To establish factorial validity, data collected from 302 respondents were tested against the TAM using confirmatory factor analysis (CFA), and structural equation…

Developing a Critical Dialog for Educational Technology: Understanding the Nature of Technology and the Legacy of Scientific Management in Our Schools

ERIC Educational Resources Information Center

Frizelle, Thomas Kenneth

2012-01-01

This dissertation examines the legacy of scientific management and the dominance of one-dimensional thinking in the field of educational technology. Through this analysis, I demonstrate that the ways practitioners and policymakers frame educational technology, assess its effectiveness, and make judgments about its potential, often exclude…

Examination of Studies on Technology-Assisted Collaborative Learning Published between 2010-2014

ERIC Educational Resources Information Center

Arnavut, Ahmet; Özdamli, Fezile

2016-01-01

This study is a content analysis of the articles about technology-assisted collaborative learning published in Science Direct database between the years of 2010 and 2014. Developing technology has become a topic that we encounter in every aspect of our lives. Educators deal with the contribution and integration of technology into education.…

Factors Affecting Faculty Use of Learning Technologies: Implications for Models of Technology Adoption

ERIC Educational Resources Information Center

Buchanan, Tom; Sainter, Phillip; Saunders, Gunter

2013-01-01

This study examines factors associated with the use of learning technologies by higher education faculty. In an online survey in a UK university, 114 faculty respondents completed a measure of Internet self-efficacy, and reported on their use of learning technologies along with barriers to their adoption. Principal components analysis suggested…

Technology Readiness of Early Career Nurse Trainees: Utilization of the Technology Readiness Index (TRI).

PubMed

Odlum, Michelle

2016-01-01

Health Information Technology (HIT) adoption by clinicians, including nurses, will lead to reduction in healthcare costs and clinical errors and improve health outcomes. Understanding the importance of technology adoption, the current study utilized the Technology Readiness Index to explore technology perceptions of nursing students. Our analysis identifies factors that may influence perceptions of technology, including decreased optimism for students with clinical experience and increased discomfort of US born students. Our study provides insight to inform training programs to further meet the increasing demands of skilled nursing staff.

System technology analysis of aeroassisted orbital transfer vehicles: Moderate lift/drag (0.75-1.5). Volume 2: Supporting research and technology report, phase 1 and 2

NASA Technical Reports Server (NTRS)

1985-01-01

Technology payoffs of representative ground based (Phase 1) and space based (Phase 2) mid lift/drag ratio (L/D) aeroassisted orbit transfer vehicles (AOTV) were assessed and prioritized. The methodology employed to generate technology payoffs, the major payoffs identified, the urgency of the technology effort required, and the technology plans suggested are summarized for both study phases. Technology issues concerning aerodynamics, aerothermodynamics, thermal protection, propulsion, and guidance, navigation and control are addressed.

Status of Propulsion Technology Development Under the NASA In-space Propulsion Technology Program

NASA Technical Reports Server (NTRS)

Anderson, David; Kamhawi, Hani; Patterson, Mike; Dankanich, John; Pencil, Eric; Pinero, Luis

2014-01-01

Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies for NASA's Science Mission Directorate (SMD). These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, Flagship and sample return missions currently under consideration. The ISPT program is currently developing technology in three areas that include Propulsion System Technologies, Entry Vehicle Technologies, and Systems Mission Analysis. ISPT's propulsion technologies include: 1) the 0.6-7 kW NASA's Evolutionary Xenon Thruster (NEXT) gridded ion propulsion system; 2) a 0.3-3.9kW Hall-effect electric propulsion (HEP) system for low cost and sample return missions; 3) the Xenon Flow Control Module (XFCM); 4) ultra-lightweight propellant tank technologies (ULTT); and 5) propulsion technologies for a Mars Ascent Vehicle (MAV). The HEP system is composed of the High Voltage Hall Accelerator (HiVHAc) thruster, a power processing unit (PPU), and the XFCM. NEXT and the HiVHAc are throttle-able electric propulsion systems for planetary science missions. The XFCM and ULTT are two component technologies which being developed with nearer-term flight infusion in mind. Several of the ISPT technologies are related to sample return missions needs like: MAV propulsion and electric propulsion. And finally, one focus of the SystemsMission Analysis area is developing tools that aid the application or operation of these technologies on wide variety of mission concepts. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness.

ECONOMIC AND ENVIRONMENTAL ANALYSIS OF TECHNOLOGIES TO TREAT MERCURY AND DISPOSE IN A MONOFILL

EPA Science Inventory

If all of the chlor alkali plants in the world shut down, it is estimated that 25-30,000 metric tons of mercury would be available worldwide. This presentation is intended to describe the economic and environmental analysis of a number of technologies for the long term management...

Benefits and Financial Impacts of Adopting Technology in Learning

ERIC Educational Resources Information Center

Grenman, Katri; Isomursu, Minna; Federley, Maija; Seisto, Anu

2013-01-01

This paper summarizes the results of an analysis of the impacts of adopting information and communication technology (ICT) solutions in a learning context. The analysis is based on a literature survey of articles reporting research cases studying the impact of adopting ICT based solutions in various learning contexts. The subject has been reviewed…

Informing Music Teaching and Learning Using Movement Analysis Technology

ERIC Educational Resources Information Center

Visentin, Peter; Shan, Gongbing; Wasiak, Edwin B.

2008-01-01

This study explores the utility of movement analysis technology as a means of contributing to a performance pedagogy informed in part by science. Two research questions were investigated: Can biomechanical skills needed for performance on the violin be accurately and objectively characterized and generalized? Can these data be used to inform…

Technology and Performance Analysis Tools | Energy Analysis | NREL

Science.gov Websites

optimize renewable energy and energy efficiency technologies for your project. Many of these tools can be the consumer or energy professional. Biomass Scenario Model (BSM) Determine which supply chain changes (BLCC) Analyze capital investments in buildings. Includes the Energy Escalation Rate Calculator 2.0-15

Review and analysis of potential safety impacts of and regulatory barriers to fuel efficiency technologies and alternative fuels in medium- and heavy-duty vehicles

DOT National Transportation Integrated Search

2015-06-01

This report summarizes a safety analysis of medium- and heavy-duty vehicles (MD/HDVs) equipped with fuel efficiency (FE) technologies and/or using alternative fuels (natural gas-CNG and LNG, propane, biodiesel and power train electrification). The st...

Analysis of Connected and Automated Vehicle Technologies Highlights

Science.gov Websites

Uncertainty in Potential Effects on Fuel Use, Miles Traveled | News | NREL Analysis of Connected and Automated Vehicle Technologies Highlights Uncertainty in Potential Effects on Fuel Use, Miles Potential Effects on Fuel Use, Miles Traveled December 13, 2016 A joint study from the U.S. Department of

Inquiring the Most Critical Teacher's Technology Education Competences in the Highest Efficient Technology Education Learning Organization

ERIC Educational Resources Information Center

Yung-Kuan, Chan; Hsieh, Ming-Yuan; Lee, Chin-Feng; Huang, Chih-Cheng; Ho, Li-Chih

2017-01-01

Under the hyper-dynamic education situation, this research, in order to comprehensively explore the interplays between Teacher Competence Demands (TCD) and Learning Organization Requests (LOR), cross-employs the data refined method of Descriptive Statistics (DS) method and Analysis of Variance (ANOVA) and Principal Components Analysis (PCA)…

76 FR 70722 - Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-15

... FEDERAL TRADE COMMISSION [File No. 111 0097] Healthcare Technology Holdings, Inc.; Analysis of Proposed Agreement Containing Consent Orders To Aid Public Comment Correction In notice document 2011-28497 appearing on pages 68189-68191 in the issue of Thursday, November 3, 2011, make the following corrections: 1...

Pedagogy with Information and Communications Technologies in Transition

ERIC Educational Resources Information Center

Webb, Mary

2014-01-01

This paper presents an analysis of ways in which pedagogy with information and communications technologies (ICTs) may need to adapt to accommodate to a major shift in our conceptions of knowledge and learning. A holistic approach to this analysis based on Checkland's "systems thinking" suggested changes in pedagogy needed for 21st…

IT Educational Experience and Workforce Development for Information Systems and Technology Students

ERIC Educational Resources Information Center

Legier, John T., Jr.; Soares, Andrey

2014-01-01

This study involves an analysis of a cohort of student's during their pursuit of a Bachelor of Science degree in Information Systems Technologies (IST) at a Midwestern university. Demographics and analysis of this cohort include basic demographic information, student home-life and personal responsibilities, employment and work experience, and…

Technologies for Teaching and Learning about Box Plots and Statistical Analysis

ERIC Educational Resources Information Center

Forster, Patricia A.

2007-01-01

This paper analyses technology-based instruction on data-analysis with box plots. Examples of instruction taken from the research literature inform a study of two classes of 17 year-old students (upper secondary) in which the mathematical relationships that their teachers targeted are distinguished as being, or not being, relevant to statistical…

Analysis of Strategies for Reducing Multiple Emissions from Electric Power Plants with Advanced Technology

EIA Publications

2001-01-01

This analysis responds to a request of Senators James M. Jeffords and Joseph I. Lieberman. This report describes the impacts of technology improvements and other market-based opportunities on the costs of emissions reductions from electricity generators, including nitrogen oxides, sulfur dioxide, mercury, and carbon dioxide.

Design of Training Systems. Computerization of the Educational Technology Assessment Model. Volume 1.

ERIC Educational Resources Information Center

Duffy, Larry B.; And Others

The Educational Technology Assessment Model (ETAM) is a set of comprehensive procedures and variables for the analysis, synthesis, and decision making, in regard to the benefits, costs, and risks associated with introducing technical innovations in education and training. This final report summarizes the analysis, design, and development…

Identifying the Ethical Challenges Encountered by Information Technology Professionals Working within the Nevada Casino Industry

ERIC Educational Resources Information Center

Essig, Michael R.

2014-01-01

A thematic analysis qualitative study was used to identify the unethical challenges encountered by Information Technology (IT) professionals working within the Nevada casino industry. Fourteen current and former IT leaders working or who worked in the Nevada casino industry were interviewed. Using thematic analysis, nine themes regarding ethical…

Combined heat and power systems: economic and policy barriers to growth.

PubMed

Kalam, Adil; King, Abigail; Moret, Ellen; Weerasinghe, Upekha

2012-04-23

Combined Heat and Power (CHP) systems can provide a range of benefits to users with regards to efficiency, reliability, costs and environmental impact. Furthermore, increasing the amount of electricity generated by CHP systems in the United States has been identified as having significant potential for impressive economic and environmental outcomes on a national scale. Given the benefits from increasing the adoption of CHP technologies, there is value in improving our understanding of how desired increases in CHP adoption can be best achieved. These obstacles are currently understood to stem from regulatory as well as economic and technological barriers. In our research, we answer the following questions: Given the current policy and economic environment facing the CHP industry, what changes need to take place in this space in order for CHP systems to be competitive in the energy market? We focus our analysis primarily on Combined Heat and Power Systems that use natural gas turbines. Our analysis takes a two-pronged approach. We first conduct a statistical analysis of the impact of state policies on increases in electricity generated from CHP system. Second, we conduct a Cost-Benefit analysis to determine in which circumstances funding incentives are necessary to make CHP technologies cost-competitive. Our policy analysis shows that regulatory improvements do not explain the growth in adoption of CHP technologies but hold the potential to encourage increases in electricity generated from CHP system in small-scale applications. Our Cost-Benefit analysis shows that CHP systems are only cost competitive in large-scale applications and that funding incentives would be necessary to make CHP technology cost-competitive in small-scale applications. From the synthesis of these analyses we conclude that because large-scale applications of natural gas turbines are already cost-competitive, policy initiatives aimed at a CHP market dominated primarily by large-scale (and therefore already cost-competitive) systems have not been effectively directed. Our recommendation is that for CHP technologies using natural gas turbines, policy focuses should be on increasing CHP growth in small-scale systems. This result can be best achieved through redirection of state and federal incentives, research and development, adoption of smart grid technology, and outreach and education.

[Purifying process of gynostemma pentaphyllum saponins based on "adjoint marker" online control technology and identification of their compositions by UPLC-QTOF-MS].

PubMed

Fan, Dong-Dong; Kuang, Yan-Hui; Dong, Li-Hua; Ye, Xiao; Chen, Liang-Mian; Zhang, Dong; Ma, Zhen-Shan; Wang, Jin-Yu; Zhu, Jing-Jing; Wang, Zhi-Min; Wang, De-Qin; Li, Chu-Yuan

2017-04-01

To optimize the purification process of gynostemma pentaphyllum saponins (GPS) based on "adjoint marker" online control technology with GPS as the testing index. UPLC-QTOF-MS technology was used for qualitative analysis. "Adjoint marker" online control results showed that the end point of load sample was that the UV absorbance of effluent liquid was equal to half of that of load sample solution, and the absorbance was basically stable when the end point was stable. In UPLC-QTOF-MS qualitative analysis, 16 saponins were identified from GPS, including 13 known gynostemma saponins and 3 new saponins. This optimized method was proved to be simple, scientific, reasonable, easy for online determination, real-time record, and can be better applied to the mass production and automation of production. The results of qualitative analysis indicated that the "adjoint marker" online control technology can well retain main efficacy components of medicinal materials, and provide analysis tools for the process control and quality traceability. Copyright© by the Chinese Pharmaceutical Association.

National Technology Center and photonics

NASA Astrophysics Data System (ADS)

Vlannes, Nickolas P.

1992-05-01

A National Technology Center is proposed in order to meet the international challenges to the economy and security of the United States. This center would be tasked with the acquisition, analysis, assessment, and dissemination of worldwide scientific and technical information and data; technology transfer to the United States; and research and development in information and library sciences and technology. The National Technology Center would form a national network linking centers of excellence and expertise, and maintain a national technology library. With these functions, the National Technology Center has inherent requirements for technologies based on photonics, and will further motivate developments in this field.

Nuclear Proliferation Technology Trends Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zentner, Michael D.; Coles, Garill A.; Talbert, Robert J.

2005-10-04

A process is underway to develop mature, integrated methodologies to address nonproliferation issues. A variety of methodologies (both qualitative and quantitative) are being considered. All have one thing in common, a need for a consistent set of proliferation related data that can be used as a basis for application. One approach to providing a basis for predicting and evaluating future proliferation events is to understand past proliferation events, that is, the different paths that have actually been taken to acquire or attempt to acquire special nuclear material. In order to provide this information, this report describing previous material acquisition activitiesmore » (obtained from open source material) has been prepared. This report describes how, based on an evaluation of historical trends in nuclear technology development, conclusions can be reached concerning: (1) The length of time it takes to acquire a technology; (2) The length of time it takes for production of special nuclear material to begin; and (3) The type of approaches taken for acquiring the technology. In addition to examining time constants, the report is intended to provide information that could be used to support the use of the different non-proliferation analysis methodologies. Accordingly, each section includes: (1) Technology description; (2) Technology origin; (3) Basic theory; (4) Important components/materials; (5) Technology development; (6) Technological difficulties involved in use; (7) Changes/improvements in technology; (8) Countries that have used/attempted to use the technology; (9) Technology Information; (10) Acquisition approaches; (11) Time constants for technology development; and (12) Required Concurrent Technologies.« less

Technological innovation in neurosurgery: a quantitative study.

PubMed

Marcus, Hani J; Hughes-Hallett, Archie; Kwasnicki, Richard M; Darzi, Ara; Yang, Guang-Zhong; Nandi, Dipankar

2015-07-01

Technological innovation within health care may be defined as the introduction of a new technology that initiates a change in clinical practice. Neurosurgery is a particularly technology-intensive surgical discipline, and new technologies have preceded many of the major advances in operative neurosurgical techniques. The aim of the present study was to quantitatively evaluate technological innovation in neurosurgery using patents and peer-reviewed publications as metrics of technology development and clinical translation, respectively. The authors searched a patent database for articles published between 1960 and 2010 using the Boolean search term "neurosurgeon OR neurosurgical OR neurosurgery." The top 50 performing patent codes were then grouped into technology clusters. Patent and publication growth curves were then generated for these technology clusters. A top-performing technology cluster was then selected as an exemplar for a more detailed analysis of individual patents. In all, 11,672 patents and 208,203 publications related to neurosurgery were identified. The top-performing technology clusters during these 50 years were image-guidance devices, clinical neurophysiology devices, neuromodulation devices, operating microscopes, and endoscopes. In relation to image-guidance and neuromodulation devices, the authors found a highly correlated rapid rise in the numbers of patents and publications, which suggests that these are areas of technology expansion. An in-depth analysis of neuromodulation-device patents revealed that the majority of well-performing patents were related to deep brain stimulation. Patent and publication data may be used to quantitatively evaluate technological innovation in neurosurgery.

Training Needs Analysis and Evaluation for New Technologies through the Use of Problem-Based Inquiry

ERIC Educational Resources Information Center

Casey, Matthew Scott; Doverspike, Dennis

2005-01-01

The analysis of calls to a help desk, in this case calls to a computer help desk, can serve as a rich source of information on the real world problems that individuals are having with the implementation of a new technology. Thus, we propose that an analysis of help desk calls, a form of problem-based inquiry, can serve as a fast and low cost means…

Analysis of a rotating advanced-technology space station for the year 2025

NASA Technical Reports Server (NTRS)

Queijo, M. J.; Butterfield, A. J.; Cuddihy, W. F.; King, C. B.; Stone, R. W.; Garn, P. A.

1988-01-01

An analysis is made of several aspects of an advanced-technology rotating space station configuration generated under a previous study. The analysis includes examination of several modifications of the configuration, interface with proposed launch systems, effects of low-gravity environment on human subjects, and the space station assembly sequence. Consideration was given also to some aspects of space station rotational dynamics, surface charging, and the possible application of tethers.

[Construction and application of special analysis database of geoherbs based on 3S technology].

PubMed

Guo, Lan-ping; Huang, Lu-qi; Lv, Dong-mei; Shao, Ai-juan; Wang, Jian

2007-09-01

In this paper,the structures, data sources, data codes of "the spacial analysis database of geoherbs" based 3S technology are introduced, and the essential functions of the database, such as data management, remote sensing, spacial interpolation, spacial statistics, spacial analysis and developing are described. At last, two examples for database usage are given, the one is classification and calculating of NDVI index of remote sensing image in geoherbal area of Atractylodes lancea, the other one is adaptation analysis of A. lancea. These indicate that "the spacial analysis database of geoherbs" has bright prospect in spacial analysis of geoherbs.

Technologies for Clinical Diagnosis Using Expired Human Breath Analysis

PubMed Central

Mathew, Thalakkotur Lazar; Pownraj, Prabhahari; Abdulla, Sukhananazerin; Pullithadathil, Biji

2015-01-01

This review elucidates the technologies in the field of exhaled breath analysis. Exhaled breath gas analysis offers an inexpensive, noninvasive and rapid method for detecting a large number of compounds under various conditions for health and disease states. There are various techniques to analyze some exhaled breath gases, including spectrometry, gas chromatography and spectroscopy. This review places emphasis on some of the critical biomarkers present in exhaled human breath, and its related effects. Additionally, various medical monitoring techniques used for breath analysis have been discussed. It also includes the current scenario of breath analysis with nanotechnology-oriented techniques. PMID:26854142

Microarray technology for major chemical contaminants analysis in food: current status and prospects.

PubMed

Zhang, Zhaowei; Li, Peiwu; Hu, Xiaofeng; Zhang, Qi; Ding, Xiaoxia; Zhang, Wen

2012-01-01

Chemical contaminants in food have caused serious health issues in both humans and animals. Microarray technology is an advanced technique suitable for the analysis of chemical contaminates. In particular, immuno-microarray approach is one of the most promising methods for chemical contaminants analysis. The use of microarrays for the analysis of chemical contaminants is the subject of this review. Fabrication strategies and detection methods for chemical contaminants are discussed in detail. Application to the analysis of mycotoxins, biotoxins, pesticide residues, and pharmaceutical residues is also described. Finally, future challenges and opportunities are discussed.

Payload software technology

NASA Technical Reports Server (NTRS)

1976-01-01

A software analysis was performed of known STS sortie payload elements and their associated experiments. This provided basic data for STS payload software characteristics and sizes. A set of technology drivers was identified based on a survey of future technology needs and an assessment of current software technology. The results will be used to evolve a planned approach to software technology development. The purpose of this plan is to ensure that software technology is advanced at a pace and a depth sufficient to fulfill the identified future needs.

An illustrative analysis of technological alternatives for satellite communications

NASA Technical Reports Server (NTRS)

Metcalfe, M. R.; Cazalet, E. G.; North, D. W.

1979-01-01

The demand for satellite communications services in the domestic market is discussed. Two approaches to increasing system capacity are the expansion of service into frequencies presently allocated but not used for satellite communications, and the development of technologies that provide a greater level of service within the currently used frequency bands. The development of economic models and analytic techniques for evaluating capacity expansion alternatives such as these are presented. The satellite orbit spectrum problem, and also outlines of some suitable analytic approaches are examined. Illustrative analysis of domestic communications satellite technology options for providing increased levels of service are also examined. The analysis illustrates the use of probabilities and decision trees in analyzing alternatives, and provides insight into the important aspects of the orbit spectrum problem that would warrant inclusion in a larger scale analysis.

[Analysis of H2S/PH3/NH3/AsH3/Cl2 by Full-Spectral Flame Photometric Detector].

PubMed

Ding, Zhi-jun; Wang, Pu-hong; Li, Zhi-jun; Du, Bin; Guo, Lei; Yu, Jian-hua

2015-07-01

Flame photometric analysis technology has been proven to be a rapid and sensitive method for sulfur and phosphorus detection. It has been widely used in environmental inspections, pesticide detection, industrial and agricultural production. By improving the design of the traditional flame photometric detector, using grating and CCD sensor array as a photoelectric conversion device, the types of compounds that can be detected were expanded. Instead of a single point of characteristic spectral lines, full spectral information has been used for qualitative and quantitative analysis of H2S, PH3, NH3, AsH3 and Cl2. Combined with chemometric method, flame photometric analysis technology is expected to become an alternative fast, real-time on-site detection technology to simultaneously detect multiple toxic and harmful gases.

Big Data in HEP: A comprehensive use case study

NASA Astrophysics Data System (ADS)

Gutsche, Oliver; Cremonesi, Matteo; Elmer, Peter; Jayatilaka, Bo; Kowalkowski, Jim; Pivarski, Jim; Sehrish, Saba; Mantilla Surez, Cristina; Svyatkovskiy, Alexey; Tran, Nhan

2017-10-01

Experimental Particle Physics has been at the forefront of analyzing the worlds largest datasets for decades. The HEP community was the first to develop suitable software and computing tools for this task. In recent times, new toolkits and systems collectively called Big Data technologies have emerged to support the analysis of Petabyte and Exabyte datasets in industry. While the principles of data analysis in HEP have not changed (filtering and transforming experiment-specific data formats), these new technologies use different approaches and promise a fresh look at analysis of very large datasets and could potentially reduce the time-to-physics with increased interactivity. In this talk, we present an active LHC Run 2 analysis, searching for dark matter with the CMS detector, as a testbed for Big Data technologies. We directly compare the traditional NTuple-based analysis with an equivalent analysis using Apache Spark on the Hadoop ecosystem and beyond. In both cases, we start the analysis with the official experiment data formats and produce publication physics plots. We will discuss advantages and disadvantages of each approach and give an outlook on further studies needed.

Mobile Technology Boosts the Effectiveness of Psychotherapy and Behavioral Interventions: A Meta-analysis

PubMed Central

Lindhiem, Oliver; Bennett, Charles B.; Rosen, Dana; Silk, Jennifer

2015-01-01

We conducted a meta-analysis on the effects of mobile technology on treatment outcome for psychotherapy and other behavioral interventions. Our search of the literature resulted in 26 empirical articles describing 25 clinical trials testing the benefits of smartphone applications, PDAs, or text messaging systems either to supplement treatment or substitute for direct contact with a clinician. Overall, mobile technology use was associated with superior treatment outcome across all study designs and control conditions, ES = .34, p < .0001. For the subset of 10 studies that looked specifically at the added benefit of mobile technology using a rigorous “Treatment” versus “Treatment + Mobile” design, effect sizes were only slightly more modest (ES = .27) and still significant (p < .05). Overall, the results support the role of mobile technology for the delivery of psychotherapy and other behavioral interventions. PMID:26187164

[Automation and organization of technological process of urinalysis].

PubMed

Kolenkin, S M; Kishkun, A A; Kol'chenko, O L

2000-12-01

Results of introduction into practice of a working model of industrial technology of laboratory studies and KONE Specific Supra and Miditron M devices are shown as exemplified by clinical analysis of the urine. This technology helps standardize all stages and operations, improves the efficiency of quality control of laboratory studies, rationally organizes the work at all stages of the process, creates a system for permanent improvement of the efficiency of investigations at the preanalytical, analytical, and postanalytical stages of technological process of laboratory studies. As a result of introduction of this technology into laboratory practice, violations of quality criteria of clinical urinalysis decreased from 15 to 8% at the preanalytical stage and from 6 to 3% at the analytical stage. Automation of the analysis decreased the need in reagents 3-fold and improved the productivity at the analytical stage 4-fold.

Bioanalysis in microfluidic devices.

PubMed

Khandurina, Julia; Guttman, András

2002-01-18

Microfabricated bioanalytical devices (also referred to as laboratory-on-a-chip or micro-TAS) offer highly efficient platforms for simultaneous analysis of a large number of biologically important molecules, possessing great potential for genome, proteome and metabolome studies. Development and implementation of microfluidic-based bioanalytical tools involves both established and evolving technologies, including microlithography, micromachining, micro-electromechanical systems technology and nanotechnology. This article provides an overview of the latest developments in the key device subject areas and the basic interdisciplinary technologies. Important aspects of DNA and protein analysis, interfacing issues and system integration are all thoroughly discussed, along with applications for this novel "synergized" technology in high-throughput separations of biologically important molecules. This review also gives a better understanding of how to utilize these technologies as well as to provide appropriate technical solutions to problems perceived as being more fundamental.

[Guidelines for budget impact analysis of health technologies in Brazil].

PubMed

Ferreira-Da-Silva, Andre Luis; Ribeiro, Rodrigo Antonini; Santos, Vânia Cristina Canuto; Elias, Flávia Tavares Silva; d'Oliveira, Alexandre Lemgruber Portugal; Polanczyk, Carisi Anne

2012-07-01

Budget impact analysis (BIA) provides operational financial forecasts to implement new technologies in healthcare systems. There were no previous specific recommendations to conduct such analyses in Brazil. This paper reviews BIA methods for health technologies and proposes BIA guidelines for the public and private Brazilian healthcare system. The following recommendations were made: adopt the budget administrator's perspective; use a timeframe of 1 to 5 years; compare reference and alternative scenarios; consider the technology's rate of incorporation; estimate the target population by either an epidemiological approach or measured demand; consider restrictions on technologies' indication or factors that increase the demand for them; consider direct and averted costs; do not adjust for inflation or discounts; preferably, integrate information on a spreadsheet; calculate the incremental budget impact between scenarios; and summarize information in a budget impact report.

A Brief Report on the Ethical and Legal Guides For Technology Use in Marriage and Family Therapy.

PubMed

Pennington, Michael; Patton, Rikki; Ray, Amber; Katafiasz, Heather

2017-10-01

Marriage and family therapists (MFTs) use ethical codes and state licensure laws/rules as guidelines for best clinical practice. It is important that professional codes reflect the potential exponential use of technology in therapy. However, current standards regarding technology use lack clarity. To explore this gap, a summative content analysis was conducted on state licensure laws/rules and professional ethical codes to find themes and subthemes among the many aspects of therapy in which technology can be utilized. Findings from the content analysis indicated that while there have been efforts by both state and professional organizations to incorporate guidance for technology use in therapy, a clear and comprehensive "roadmap" is still missing. Future scholarship is needed that develops clearer guidelines for therapists. © 2017 American Association for Marriage and Family Therapy.

Health technologies for the improvement of chronic disease management: a review of the Medical Advisory Secretariat evidence-based analyses between 2006 and 2011.

PubMed

Nikitovic, M; Brener, S

2013-01-01

As part of ongoing efforts to improve the Ontario health care system, a mega-analysis examining the optimization of chronic disease management in the community was conducted by Evidence Development and Standards, Health Quality Ontario (previously known as the Medical Advisory Secretariat [MAS]). The purpose of this report was to identify health technologies previously evaluated by MAS that may be leveraged in efforts to optimize chronic disease management in the community. The Ontario Health Technology Assessment Series and field evaluations conducted by MAS and its partners between January 1, 2006, and December 31, 2011. Technologies related to at least 1 of 7 disease areas of interest (type 2 diabetes, coronary artery disease, atrial fibrillation, chronic obstructive pulmonary disease, congestive heart failure, stroke, and chronic wounds) or that may greatly impact health services utilization were reviewed. Only technologies with a moderate to high quality of evidence and associated with a clinically or statistically significant improvement in disease management were included. Technologies related to other topics in the mega-analysis on chronic disease management were excluded. Evidence-based analyses were reviewed, and outcomes of interest were extracted. Outcomes of interest included hospital utilization, mortality, health-related quality of life, disease-specific measures, and economic analysis measures. Eleven analyses were included and summarized. Technologies fell into 3 categories: those with evidence for the cure of chronic disease, those with evidence for the prevention of chronic disease, and those with evidence for the management of chronic disease. The impact on patient outcomes and hospitalization rates of new health technologies in chronic disease management is often overlooked. This analysis demonstrates that health technologies can reduce the burden of illness; improve patient outcomes; reduce resource utilization intensity; be cost-effective; and be a viable contributing factor to chronic disease management in the community. People with chronic diseases rely on the health care system to help manage their illness. Hospital use can be costly, so community-based alternatives are often preferred. Research published in the Ontario Health Technology Assessment Series between 2006 and 2011 was reviewed to identify health technologies that have been effective or cost-effective in helping to manage chronic disease in the community. All technologies identified led to better patient outcomes and less use of health services. Most were also cost-effective. Two technologies that can cure chronic disease and 1 that can prevent chronic disease were found. Eight technologies that can help manage chronic disease were also found. Health technologies should be considered an important part of chronic disease management in the community.

Health Technologies for the Improvement of Chronic Disease Management

PubMed Central

Nikitovic, M; Brener, S

2013-01-01

Background As part of ongoing efforts to improve the Ontario health care system, a mega-analysis examining the optimization of chronic disease management in the community was conducted by Evidence Development and Standards, Health Quality Ontario (previously known as the Medical Advisory Secretariat [MAS]). Objective The purpose of this report was to identify health technologies previously evaluated by MAS that may be leveraged in efforts to optimize chronic disease management in the community. Data Sources The Ontario Health Technology Assessment Series and field evaluations conducted by MAS and its partners between January 1, 2006, and December 31, 2011. Review Methods Technologies related to at least 1 of 7 disease areas of interest (type 2 diabetes, coronary artery disease, atrial fibrillation, chronic obstructive pulmonary disease, congestive heart failure, stroke, and chronic wounds) or that may greatly impact health services utilization were reviewed. Only technologies with a moderate to high quality of evidence and associated with a clinically or statistically significant improvement in disease management were included. Technologies related to other topics in the mega-analysis on chronic disease management were excluded. Evidence-based analyses were reviewed, and outcomes of interest were extracted. Outcomes of interest included hospital utilization, mortality, health-related quality of life, disease-specific measures, and economic analysis measures. Results Eleven analyses were included and summarized. Technologies fell into 3 categories: those with evidence for the cure of chronic disease, those with evidence for the prevention of chronic disease, and those with evidence for the management of chronic disease. Conclusions The impact on patient outcomes and hospitalization rates of new health technologies in chronic disease management is often overlooked. This analysis demonstrates that health technologies can reduce the burden of illness; improve patient outcomes; reduce resource utilization intensity; be cost-effective; and be a viable contributing factor to chronic disease management in the community. Plain Language Summary People with chronic diseases rely on the health care system to help manage their illness. Hospital use can be costly, so community-based alternatives are often preferred. Research published in the Ontario Health Technology Assessment Series between 2006 and 2011 was reviewed to identify health technologies that have been effective or cost-effective in helping to manage chronic disease in the community. All technologies identified led to better patient outcomes and less use of health services. Most were also cost-effective. Two technologies that can cure chronic disease and 1 that can prevent chronic disease were found. Eight technologies that can help manage chronic disease were also found. Health technologies should be considered an important part of chronic disease management in the community. PMID:24228075

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, ANEST IWATA CORPORATION W400-LV SPRAY GUN

EPA Science Inventory

Under EPA’s Environmental Technology Verification program, which provides objective and scientific third party analysis of new technology that can benefit the environment, the pollution prevention capabilities of a high transfer efficiency liquid spray gun was tested. This ...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, SHARPE MANUFACTURING TITANIUM T1-CG SPRAY GUN

EPA Science Inventory

Under EPA’s Environmental Technology Verification program, which provides objective and scientific third party analysis of new technology that can benefit the environment, the pollution prevention capabilities of a high transfer efficiency liquid spray gun was tested. This ...

Cooperation, Technology, and Performance: A Case Study.

ERIC Educational Resources Information Center

Cavanagh, Thomas; Dickenson, Sabrina; Brandt, Suzanne

1999-01-01

Describes the CTP (Cooperation, Technology, and Performance) model and explains how it is used by the Department of Veterans Affairs-Veteran's Benefit Administration (VBA) for training. Discusses task analysis; computer-based training; cooperative-based learning environments; technology-based learning; performance-assessment methods; courseware…

Definition of technology development missions for early space station, orbit transfer vehicle servicing, volume 2

NASA Technical Reports Server (NTRS)

1983-01-01

Propellant transfer, storage, and reliquefaction TDM; docking and berthing technology development mission; maintenance technology development mission; OTV/payload integration, space station interface/accommodations; combined TDM conceptual design; programmatic analysis; and TDM equipment usage are discussed.

SITE CHARACTERIZATION ANALYSIS PENETROMETER SYSTEM (SCAPS) - INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

In August 1994, a demonstration of cone penetrometer-mounted sensor technologies took place to evaluate their effectiveness in sampling and analyzing the physical and chemical characteristics of subsurface sod at hazardous waste sites. he effectiveness of each technology was eval...

Project for the analysis of technology transfer

NASA Technical Reports Server (NTRS)

Kottenstette, J. P.; Freeman, J. E.; Staskin, E. R.

1971-01-01

The special task of preparing technology transfer profiles during the first six months of 1971 produced two major results: refining a new method for identifying and describing technology transfer activities, and generating practical insights into a number of issues associated with transfer programs.

Future Work II.

ERIC Educational Resources Information Center

Harris, Philip R.

1985-01-01

Looks at changes in the manager's role due to technological advancement in the workplace. Discusses wider range of uses for computers (analysis, decision making, communications, planning, tracking trends), importance of supervisor training, cyberphobia (fear of new technology), cyberphrenia (addiction to new technology), and the effect of a work…

Analysis of the frontier technology of agricultural IoT and its predication research

NASA Astrophysics Data System (ADS)

Han, Shuqing; Zhang, Jianhua; Zhu, Mengshuai; Wu, Jianzhai; Shen, Chen; Kong, Fantao

2017-09-01

Agricultural IoT (Internet of Things) develops rapidly. Nanotechnology, biotechnology and optoelectronic technology are successfully integrated into the agricultural sensor technology. Big data, cloud computing and artificial intelligence technology have also been successfully used in IoT. This paper carries out the research on integration of agricultural sensor technology, nanotechnology, biotechnology and optoelectronic technology and the application of big data, cloud computing and artificial intelligence technology in agricultural IoT. The advantages and development of the integration of nanotechnology, biotechnology and optoelectronic technology with agricultural sensor technology were discussed. The application of big data, cloud computing and artificial intelligence technology in IoT and their development trend were analysed.

[Analysis of medical cost of atlantoaxial disorders in patients receiving innovated treatment technologies].

PubMed

Wu, Yunxia; Liu, Zhongjun

2016-01-19

To explore the effects of innovated technologies and products on improving outcomes and decreasing medical costs by analyzing a total and subtotal medical costs of patients with atlantoaxial disorders. The medical costs of 1 489 patients with atlantoaxial disorders from Peking University Third Hospital from 2005 to 2014, who received innovated technologies and products treatment were retrospectively analyzed and compared.Descriptive analysis and ANOVA were used for statistical analysis, and SPSS 19.0 was used to analyze data. From 2005 to 2014, under the situation of a general increase in medical cost by 327%, the total medical costs were stable for patients who used innovated technologies and products for treatment, fluctuating from 20 851 in 2005 to 20 878 in 2014; however, the cases of operation increased year by year, from 88 in 2005 to 163 in 2014; the average length of stay decreased from 21 in 2005 to 10 in 2014; the total cases of transfusion were 22 from 2005 to 2014; the safety, stability and feasibility of the innovated technologies and products were illustrated through the decrease of average length of stay, the reduction of bleeding and the significance of outcomes. It is illustrated that the innovated technologies and products not only decrease patients' suffering and medical costs but also are safe, stable and feasible.

Health technology prioritization: which criteria for prioritizing new technologies and what are their relative weights?

PubMed

Golan, Ofra; Hansen, Paul; Kaplan, Giora; Tal, Orna

2011-10-01

To review the criteria and 'other' considerations used internationally for prioritizing new health technologies, and to demonstrate a conjoint-analysis methodology (also known as discrete choice experiments) for deriving relative weights for the criteria. We searched the literature for criteria and other considerations for prioritizing new technologies. A convenience sample of 74 respondents completed a conjoint-analysis survey involving criteria related to technologies' 'benefits'. Encompassing 11 countries and the US state of Oregon, we were able to distinguish three main groups of criteria: (a) Need, appropriateness and clinical benefits; (b) Efficiency (including cost-effectiveness); and (c) Equality, solidarity and other ethical or social values. For several countries, the quality of the clinical and economic evidence and factors related to strategic issues and procedural justice respectively are also considered. The criteria and their weights from the conjoint-analysis survey are: 'Lives saved'=0.343, 'Life-prolongation benefits'=0.243, 'Quality-of-life gains'=0.217, a criterion representing the availability of alternative treatments=0.107, and 'Other important social/ethical benefits'=0.087. The criteria represent a pluralistic combination of needs-based, maximizing and egalitarian principles, and we demonstrated a methodology for deriving the weights for criteria related to technologies' 'benefits'. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Status and Mission Applicability of NASA's In-Space Propulsion Technology Project

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Dankanich, John; Pencil, Eric; Liou, Larry

2009-01-01

The In-Space Propulsion Technology (ISPT) project develops propulsion technologies that will enable or enhance NASA robotic science missions. Since 2001, the ISPT project developed and delivered products to assist technology infusion and quantify mission applicability and benefits through mission analysis and tools. These in-space propulsion technologies are applicable, and potentially enabling for flagship destinations currently under evaluation, as well as having broad applicability to future Discovery and New Frontiers mission solicitations. This paper provides status of the technology development, near-term mission benefits, applicability, and availability of in-space propulsion technologies in the areas of advanced chemical thrusters, electric propulsion, aerocapture, and systems analysis tools. The current chemical propulsion investment is on the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance for lower cost. Investments in electric propulsion technologies focused on completing NASA's Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system, and the High Voltage Hall Accelerator (HiVHAC) thruster, which is a mid-term product specifically designed for a low-cost electric propulsion option. Aerocapture investments developed a family of thermal protections system materials and structures; guidance, navigation, and control models of blunt-body rigid aeroshells; atmospheric models for Earth, Titan, Mars and Venus; and models for aerothermal effects. In 2009 ISPT started the development of propulsion technologies that would enable future sample return missions. The paper describes the ISPT project's future focus on propulsion for sample return missions. The future technology development areas for ISPT is: Planetary Ascent Vehicles (PAV), with a Mars Ascent Vehicle (MAV) being the initial development focus; multi-mission technologies for Earth Entry Vehicles (MMEEV) needed for sample return missions from many different destinations; propulsion for Earth Return Vehicles (ERV), transfer stages to the destination, and Electric Propulsion for sample return and low cost missions; and Systems/Mission Analysis focused on sample return propulsion. The ISPT project is funded by NASA's Science Mission Directorate (SMD).

Analysis of wavelet technology for NASA applications

NASA Technical Reports Server (NTRS)

Wells, R. O., Jr.

1994-01-01

The purpose of this grant was to introduce a broad group of NASA researchers and administrators to wavelet technology and to determine its future role in research and development at NASA JSC. The activities of several briefings held between NASA JSC scientists and Rice University researchers are discussed. An attached paper, 'Recent Advances in Wavelet Technology', summarizes some aspects of these briefings. Two proposals submitted to NASA reflect the primary areas of common interest. They are image analysis and numerical solutions of partial differential equations arising in computational fluid dynamics and structural mechanics.

High temperature solar thermal technology

NASA Technical Reports Server (NTRS)

Leibowitz, L. P.; Hanseth, E. J.; Peelgren, M. L.

1980-01-01

Some advanced technology concepts under development for high-temperature solar thermal energy systems to achieve significant energy cost reductions and performance gains and thus promote the application of solar thermal power technology are presented. Consideration is given to the objectives, current efforts and recent test and analysis results in the development of high-temperature (950-1650 C) ceramic receivers, thermal storage module checker stoves, and the use of reversible chemical reactions to transport collected solar energy. It is pointed out that the analysis and testing of such components will accelerate the commercial deployment of solar energy.

Multidisciplinary propulsion simulation using NPSS

NASA Technical Reports Server (NTRS)

Claus, Russell W.; Evans, Austin L.; Follen, Gregory J.

1992-01-01

The current status of the Numerical Propulsion System Simulation (NPSS) program, a cooperative effort of NASA, industry, and universities to reduce the cost and time of advanced technology propulsion system development, is reviewed. The technologies required for this program include (1) interdisciplinary analysis to couple the relevant disciplines, such as aerodynamics, structures, heat transfer, combustion, acoustics, controls, and materials; (2) integrated systems analysis; (3) a high-performance computing platform, including massively parallel processing; and (4) a simulation environment providing a user-friendly interface. Several research efforts to develop these technologies are discussed.

Technology for large space systems: A bibliography with indexes (supplement 12)

NASA Technical Reports Server (NTRS)

1985-01-01

A bibliography listing 516 reports, articles and other documents introduced into the NASA scientific and technical information system between July 1, 1984 and December 31, 1984 is presented. Its purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design in the area of Large Space System Technology. Subject matter is grouped according to system, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems.

Technology assessment of future intercity passenger transportation systems. Volume 7: Study recommendations

NASA Technical Reports Server (NTRS)

1976-01-01

Research and analysis tasks to alleviate negative impacts, to augment positive impacts, or to better understand the impacts produced by the potential introduction of the alternate transportation technologies are identified. The project team's recommendations on research and analysis efforts which have resulted from the technology assessment are provided. Many of the recommendations apply to the future supply of intercity passenger transportation services, categorized by mode. Other recommendations pertain to broad issues in intercity transportation--e.g., finance, regulation, traveler values--that will affect all modes.

Are we at a crossroads or a plateau? Radiomics and machine learning in abdominal oncology imaging.

PubMed

Summers, Ronald M

2018-05-05

Advances in radiomics and machine learning have driven a technology boom in the automated analysis of radiology images. For the past several years, expectations have been nearly boundless for these new technologies to revolutionize radiology image analysis and interpretation. In this editorial, I compare the expectations with the realities with particular attention to applications in abdominal oncology imaging. I explore whether these technologies will leave us at a crossroads to an exciting future or to a sustained plateau and disillusionment.

Construct exploit constraint in crash analysis by bypassing canary

NASA Astrophysics Data System (ADS)

Huang, Ning; Huang, Shuguang; Huang, Hui; Chang, Chao

2017-08-01

Selective symbolic execution is a common program testing technology. Developed on the basis of it, some crash analysis systems are often used to test the fragility of the program by constructing exploit constraints, such as CRAX. From the study of crash analysis based on symbolic execution, this paper find that this technology cannot bypass the canary stack protection mechanisms. This paper makes the improvement uses the API hook in Linux. Experimental results show that the use of API hook can effectively solve the problem that crash analysis cannot bypass the canary protection.

Integrated Technology Assessment Center (ITAC) Update

NASA Technical Reports Server (NTRS)

Taylor, J. L.; Neely, M. A.; Curran, F. M.; Christensen, E. R.; Escher, D.; Lovell, N.; Morris, Charles (Technical Monitor)

2002-01-01

The Integrated Technology Assessment Center (ITAC) has developed a flexible systems analysis framework to identify long-term technology needs, quantify payoffs for technology investments, and assess the progress of ASTP-sponsored technology programs in the hypersonics area. For this, ITAC has assembled an experienced team representing a broad sector of the aerospace community and developed a systematic assessment process complete with supporting tools. Concepts for transportation systems are selected based on relevance to the ASTP and integrated concept models (ICM) of these concepts are developed. Key technologies of interest are identified and projections are made of their characteristics with respect to their impacts on key aspects of the specific concepts of interest. Both the models and technology projections are then fed into the ITAC's probabilistic systems analysis framework in ModelCenter. This framework permits rapid sensitivity analysis, single point design assessment, and a full probabilistic assessment of each concept with respect to both embedded and enhancing technologies. Probabilistic outputs are weighed against metrics of interest to ASTP using a multivariate decision making process to provide inputs for technology prioritization within the ASTP. ITAC program is currently finishing the assessment of a two-stage-to-orbit (TSTO), rocket-based combined cycle (RBCC) concept and a TSTO turbine-based combined cycle (TBCC) concept developed by the team with inputs from NASA. A baseline all rocket TSTO concept is also being developed for comparison. Boeing has recently submitted a performance model for their Flexible Aerospace System Solution for Tomorrow (FASST) concept and the ISAT program will provide inputs for a single-stage-to-orbit (SSTO) TBCC based concept in the near-term. Both of these latter concepts will be analyzed within the ITAC framework over the summer. This paper provides a status update of the ITAC program.

Past Research in Instructional Technology: Results of a Content Analysis of Empirical Studies Published in Three Prominent Instructional Technology Journals from the Year 2000 through 2004

ERIC Educational Resources Information Center

Hew, Khe Foon; Kale, Ugur; Kim, Nari

2007-01-01

This article reviews and categorizes empirical studies related to instructional technology that were published in three prominent journals: "Educational Technology Research and Development, Instructional Science," and the "Journal of Educational Computing Research" from the year 2000 through 2004. Four questions guided this review: 1) What…

SEMATECH, A Case Study: Analysis of a Government-Industry Partnership

DTIC Science & Technology

1993-09-23

profit potential in the private market. Often, public sector technologies do not. Commercial technologies must be technically and economically...and Private Spending .................. 80 ix I. INTRODUCTION AND BACKGROUND Critics proclaim the Semiconductor Manufacturing Technology Initiative...in the R&D market and in the product market." (Katz and Ordover, 1990, p. 150) Technological spillovers result primarily from private R&D investment

The Effectiveness of Educational Technology Applications for Enhancing Mathematics Achievement in K-12 Classrooms: A Meta-Analysis. Educator's Summary

ERIC Educational Resources Information Center

Center for Research and Reform in Education, 2012

2012-01-01

This review summarizes research on the effects of technology use on mathematics achievement in K-12 classrooms. The main research questions included: (1) Do education technology applications improve mathematics achievement in K-12 classrooms as compared to traditional teaching methods without education technology?; and (2) What study and research…

A Comparative Analysis of Preferred Learning and Teaching Styles for Engineering, Industrial, and Technology Education Students and Faculty

ERIC Educational Resources Information Center

Katsioloudis, Petros; Fantz, Todd D.

2012-01-01

In the spring semester of 2010, a materials process course was selected as a means to perform a preferred learning style research study. This course was selected because it contained three groups of students: technology education, engineering technology, and industrial technology. The researchers believed that the differences in the students'…

Partners in Economic Growth: High Technology Industry and Postsecondary Education. The Report of the Task Force on High Technology.

ERIC Educational Resources Information Center

Saskatchewan Dept. of Advanced Education and Manpower, Saskatoon.

An analysis is presented of the adequacy of Saskatchewan's technical institutes to satisfy the skilled labor needs of the emergent high technology industry. After section 1 summarizes the recommendations of the Task Force appointed to study the issue, section 2 offers a definition of "high technology" industries, looks at the effects of…

A sensitivity analysis of process design parameters, commodity prices and robustness on the economics of odour abatement technologies.

PubMed

Estrada, José M; Kraakman, N J R Bart; Lebrero, Raquel; Muñoz, Raúl

2012-01-01

The sensitivity of the economics of the five most commonly applied odour abatement technologies (biofiltration, biotrickling filtration, activated carbon adsorption, chemical scrubbing and a hybrid technology consisting of a biotrickling filter coupled with carbon adsorption) towards design parameters and commodity prices was evaluated. Besides, the influence of the geographical location on the Net Present Value calculated for a 20 years lifespan (NPV20) of each technology and its robustness towards typical process fluctuations and operational upsets were also assessed. This comparative analysis showed that biological techniques present lower operating costs (up to 6 times) and lower sensitivity than their physical/chemical counterparts, with the packing material being the key parameter affecting their operating costs (40-50% of the total operating costs). The use of recycled or partially treated water (e.g. secondary effluent in wastewater treatment plants) offers an opportunity to significantly reduce costs in biological techniques. Physical/chemical technologies present a high sensitivity towards H2S concentration, which is an important drawback due to the fluctuating nature of malodorous emissions. The geographical analysis evidenced high NPV20 variations around the world for all the technologies evaluated, but despite the differences in wage and price levels, biofiltration and biotrickling filtration are always the most cost-efficient alternatives (NPV20). When, in an economical evaluation, the robustness is as relevant as the overall costs (NPV20), the hybrid technology would move up next to BTF as the most preferred technologies. Copyright © 2012 Elsevier Inc. All rights reserved.

Aircraft Maintenance Engineering: Factors Impacting Airlines E-Maintenance Technologies, Authoring and Illustrations

NASA Astrophysics Data System (ADS)

Karayianes, Frank

The purpose of this research was to evaluate factors influencing acceptance and use of technologies in the field of aircraft maintenance authoring, graphics, and documentation. Maintenance engineering authors convert complex engineering used in aircraft production and transform that data using technology (tools) into usable technical publications data. While the current literature includes a large volume of research in technology acceptance in various domains of industry and business, the problem is that no such studies exist with respect to the aircraft maintenance engineering authoring, allowing any number of tools to be used and acceptance to be unsure. The study was based on theoretical approaches of the Technology Acceptance Model and the associated hypothesis related to eight research questions. A survey questionnaire was developed for data collection from a selected population of aircraft maintenance engineering authors. Data collected from 148 responses were exposed to a range of statistical methods and analyses. Analysis of data were performed within the structural equation model using exploratory factor analysis, confirmatory factor analysis, and a range of regression methods. The analyses generally provided results consistent with prior literature. Two survey questions yielded unexpected results contrary to similar studies. The relationship between prior experience and job level did not show a significant relationship with perceived usefulness or perceived ease of use. Other results included the significant relationship between Perceived Usefulness and Perceived Ease of Use with Technology acceptance. Recommendations include understanding how Technology Acceptance can be improved for the industry and the need for further research not covered to refine recommendations for technology acceptance related to the aviation industry.

Farm and socio-economic characteristics of smallholder milk producers and their influence on technology adoption in Central Mexico.

PubMed

García, Carlos Galdino Martínez; Dorward, Peter; Rehman, Tahir

2012-08-01

In order to identify the factors influencing adoption of technologies promoted by government to small-scale dairy farmers in the highlands of central Mexico, a field survey was conducted. A total of 115 farmers were grouped through cluster analysis (CA) and divided into three wealth status categories (high, medium and low) using wealth ranking. Chi-square analysis was used to examine the association of wealth status with technology adoption. Four groups of farms were differentiated in terms of farms' dimensions, farmers' education, sources of incomes, wealth status, management of herd, monetary support by government and technological availability. Statistical differences (p < 0.05) were observed in the milk yield per herd per year among groups. Government organizations (GO) participated little in the promotion of the 17 technologies identified, six of which focused on crop or forage production and 11 of which were related to animal husbandry. Relatives and other farmers played an important role in knowledge diffusion and technology adoption. Although wealth status had a significant association (p < 0.05) with adoption, other factors including importance of the technology to farmers, usefulness and productive benefits of innovations together with farmers' knowledge of them, were important. It is concluded that the analysis of the information per group and wealth status was useful to identify suitable crop or forage related and animal husbandry technologies per group and wealth status of farmers. Therefore the characterizations of farmers could provide a useful starting point for the design and delivery of more appropriate and effective extension.

Low carbon technology performance vs infrastructure vulnerability: analysis through the local and global properties space.

PubMed

Dawson, David A; Purnell, Phil; Roelich, Katy; Busch, Jonathan; Steinberger, Julia K

2014-11-04

Renewable energy technologies, necessary for low-carbon infrastructure networks, are being adopted to help reduce fossil fuel dependence and meet carbon mitigation targets. The evolution of these technologies has progressed based on the enhancement of technology-specific performance criteria, without explicitly considering the wider system (global) impacts. This paper presents a methodology for simultaneously assessing local (technology) and global (infrastructure) performance, allowing key technological interventions to be evaluated with respect to their effect on the vulnerability of wider infrastructure systems. We use exposure of low carbon infrastructure to critical material supply disruption (criticality) to demonstrate the methodology. A series of local performance changes are analyzed; and by extension of this approach, a method for assessing the combined criticality of multiple materials for one specific technology is proposed. Via a case study of wind turbines at both the material (magnets) and technology (turbine generators) levels, we demonstrate that analysis of a given intervention at different levels can lead to differing conclusions regarding the effect on vulnerability. Infrastructure design decisions should take a systemic approach; without these multilevel considerations, strategic goals aimed to help meet low-carbon targets, that is, through long-term infrastructure transitions, could be significantly jeopardized.

Smarter elder care? A cost-effectiveness analysis of implementing technology in elder care.

PubMed

Aanesen, Margrethe; Lotherington, Ann Therese; Olsen, Frank

2011-09-01

Whereas in most sectors, technology has taken over trivial and labour consuming tasks, this transformation has been delayed in the healthcare sector. Although appropriate technology is available, there is general resistance to substituting 'warm' hands with 'cold' technology. In the future, this may change as the number of elderly people increases relative to the people in the work force. In combination with an increasing demand for healthcare services, there are calls for efforts to increase productivity in the sector. Based on experience data from previous studies on information and communication technology efforts in the healthcare sector, we quantitatively assess the use of smart house technology and video visits in home care. Having identified healthcare providers, hospitals and relatives as the main affected groups, we show that smart house technology is cost-effective, even if only relatives gain from it. Video visits, which have higher implementation costs, demand effects on both relatives and health care providers in order to be a cost-effective tool in home care. As the analysis is purely quantitative, these results need to be complemented with qualitative effects and with more thorough discussions of the ethical, medical and legal aspects of the use of technology in home care.

Benefit-Cost Analysis of Integrated Paratransit Systems : Volume 5. The Impacts of Technological Innovation.

DOT National Transportation Integrated Search

1979-09-01

A number of new technologies have been implemented with or proposed for paratransit systems. As part of the overall IP benefit cost study, the potential impact of two such technologies, digital communications and computer dispatching, have been analy...

A Suite of Tools for Technology Assessment

DTIC Science & Technology

2007-09-01

Saden, Povinelli & Rosen, 1989). • This was a significant change in emphasis on the part of NASA, where technology had previously viewed as merely...Cost Analysis Symposium, April 13, 2005. A Suite of Tools for Technology Assessment 24 Bibliography - continued: • Sadin, Stanley T.; Povinelli

Comparative analysis between academic and patent publications based on Fenton Technologies among China, Brazil, and the rest of the world.

PubMed

de Luna, Airton José; Santos, Douglas Alves

2017-03-01

Worldwide, year by year, Fenton's Technologies have been highlighted in both academic and patent scopes, in part due to their proven efficiency as environment-friendly technologies destined to the abatement of organic pollutants, and also by their growing interest to produce industrial applications. Thus, aiming to understand the effective dynamic between two worlds, academy vs patents, the present study performs a comparative analysis about publications on Fenton-based Technologies (FbT). Therefore, in this work, technological foresight techniques were adopted focusing on patent and non-patent databases, employing for this, the Web of Science (WoS) database as a prospecting tool. The main results for the last decade point out to a strong increment of the Fenton's Technologies, as much in R&D as in patent applications in the world. Chinese Universities and firms command the scenario. There is an expressive gap between the academic and patent issues.

Supply Chain Sustainability Analysis of Fast Pyrolysis and Hydrotreating Bio-Oil to Produce Hydrocarbon Fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adom, Felix K.; Cai, Hao; Dunn, Jennifer B.

2016-03-01

The Department of Energy’s (DOE) Bioenergy Technology Office (BETO) aims at developing and deploying technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts and biopower through public and private partnerships (DOE, 2015). BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of technologies to produce biofuels. These assessments evaluate feedstock production, logistics of transporting the feedstock, and conversion of the feedstock to biofuel. There are two general types of TEAs. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables identification of data gaps and research andmore » development needs, and provides goals and targets against which technology progress is assessed. On the other hand, a state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available.« less

Implementation of newly adopted technology in acute care settings: a qualitative analysis of clinical staff

PubMed Central

Langhan, Melissa L.; Riera, Antonio; Kurtz, Jordan C.; Schaeffer, Paula; Asnes, Andrea G.

2015-01-01

Objective Technologies are not always successfully implemented into practise. We elicited experiences of acute care providers with the introduction of technology and identified barriers and facilitators in the implementation process. Methods A qualitative study using one-on-one interviews among a purposeful sample of 19 physicians and nurses within ten emergency departments and intensive care units was performed. Grounded theory, iterative data analysis and the constant comparative method were used to inductively generate ideas and build theories. Results Five major categories emerged: decision-making factors, the impact on practise, technology's perceived value, facilitators and barriers to implementation. Barriers included negative experiences, age, infrequent use, and access difficulties. A positive outlook, sufficient training, support staff, and user friendliness were facilitators. Conclusions This study describes strategies implicated in the successful implementation of newly adopted technology in acute care settings. Improved implementation methods and evaluation of implementation processes are necessary for successful adoption of new technology. PMID:25367721

Electrification Futures Study: End-Use Electric Technology Cost and Performance Projections through 2050

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vimmerstedt, Laura J.; Jadun, Paige; McMillan, Colin A.

This report provides projected cost and performance assumptions for electric technologies considered in the Electrification Futures Study, a detailed and comprehensive analysis of the effects of widespread electrification of end-use service demands in all major economic sectors - transportation, residential and commercial buildings, and industry - for the contiguous United States through 2050. Using extensive literature searches and expert assessment, the authors identify slow, moderate, and rapid technology advancement sensitivities on technology cost and performance, and they offer a comparative analysis of levelized cost metrics as a reference indicator of total costs. The identification and characterization of these end-use servicemore » demand technologies is fundamental to the Electrification Futures Study. This report, the larger Electrification Futures Study, and the associated data and methodologies may be useful to planners and analysts in evaluating the potential role of electrification in an uncertain future. The report could be broadly applicable for other analysts and researchers who wish to assess electrification and electric technologies.« less

FY2017 Analysis Annual Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

During fiscal year 2017, the U.S. Department of Energy Vehicle Technologies Office (VTO) funded analysis projects supportive of VTO’s goals to pursue early stage research in vehicle and mobility system technologies to reduce petroleum dependence, increase energy reliability and security, improve transportation affordability, and promote economic growth. VTO analysis projects result in a foundation of data, analytical models, and applied analyses that provide insights into critical transportation energy problems and assist in research investment prioritization and portfolio planning.

Behavior analysis: the science of training.

PubMed

Farhoody, Parvene

2012-09-01

Behavior analysis is a data-driven science dedicated to understanding the mechanisms of behavior. Applied behavior analysis is a branch of this scientific field that systematically applies scientific principles to real-world problems in an effort to improve quality of life. The use of the behavioral technology provides a way to teach human and nonhuman animals more effectively and efficiently and offers those using this technology increased success in achieving behavioral goals. Copyright © 2012 Elsevier Inc. All rights reserved.

Biomedical applications of aerospace technology

NASA Technical Reports Server (NTRS)

Castles, T. R.

1971-01-01

Aerospace technology transfer to biomedical research problems is discussed, including transfer innovations and potential applications. Statistical analysis of the transfer activities and impact is also presented.

Towards a Socio-Cultural Framework for the Analysis of Joint Student-Teacher Development over Technology-Based Mathematics Lessons

ERIC Educational Resources Information Center

Monaghan, John

2013-01-01

This paper offers a framework, an extension of Valsiner's "zone theory", for the analysis of joint student-teacher development over a series of technology-based mathematics lessons. The framework is suitable for developing research studies over a moderately long period of time and considers interrelated student-teacher development as…

Faculty Recommendations for Web Tools: Implications for Course Management Systems

ERIC Educational Resources Information Center

Oliver, Kevin; Moore, John

2008-01-01

A gap analysis of web tools in Engineering was undertaken as one part of the Digital Library Network for Engineering and Technology (DLNET) grant funded by NSF (DUE-0085849). DLNET represents a Web portal and an online review process to archive quality knowledge objects in Engineering and Technology disciplines. The gap analysis coincided with the…

A Co-Citation Network of Young Children's Learning with Technology

ERIC Educational Resources Information Center

Tang, Kai-Yu; Li, Ming-Chaun; Hsin, Ching-Ting; Tsai, Chin-Chung

2016-01-01

This paper used a novel literature review approach--co-citation network analysis--to illuminate the latent structure of 87 empirical papers in the field of young children's learning with technology (YCLT). Based on the document co-citation analysis, a total of 206 co-citation relationships among the 87 papers were identified and then graphically…

A Guide for Planning Drafting and Design Technology Programs. Section III, Data Collection and Analysis.

ERIC Educational Resources Information Center

1971

This document, the second of three related reports, constitutes the data collection and analysis section of the study designed to provide information for preparing a planning guide for drafting and design technology programs. The curriculum survey instrument mailed to 26 schools, contained questions regarding: (1) length of semesters, (2)…

Components of spatial information management in wildlife ecology: Software for statistical and modeling analysis [Chapter 14

Treesearch

Hawthorne L. Beyer; Jeff Jenness; Samuel A. Cushman

2010-01-01

Spatial information systems (SIS) is a term that describes a wide diversity of concepts, techniques, and technologies related to the capture, management, display and analysis of spatial information. It encompasses technologies such as geographic information systems (GIS), global positioning systems (GPS), remote sensing, and relational database management systems (...

A Meta-Analysis of the Effects of Computer Technology on School Students' Mathematics Learning

ERIC Educational Resources Information Center

Li, Qing; Ma, Xin

2010-01-01

This study examines the impact of computer technology (CT) on mathematics education in K-12 classrooms through a systematic review of existing literature. A meta-analysis of 85 independent effect sizes extracted from 46 primary studies involving a total of 36,793 learners indicated statistically significant positive effects of CT on mathematics…

Technology Integration in a One-to-One Laptop Initiative: A Multiple Case Study Analysis

ERIC Educational Resources Information Center

Jones, Marsha B.

2013-01-01

The purpose of this multiple case study analysis was to examine teachers' experiences and perceptions in order to understand what actions and interactions supported or inhibited technology integration during a one-to-one laptop initiative. This research sought to gain teachers' perspectives on the challenges and successes they faced as classroom…

Scaffolding Assignments: Analysis of Assignmentor as a Tool to Support First Year Students' Academic Writing Skills

ERIC Educational Resources Information Center

Silva, Pedro

2017-01-01

There are several technological tools which aim to support first year students' challenges, especially when it comes to academic writing. This paper analyses one of these tools, Wiley's AssignMentor. The Technological Pedagogical Content Knowledge framework was used to systematise this analysis. The paper showed an alignment between the tools'…

Challenges of Adopting the Use of Technology in Less Developed Countries: The Case of Cambodia

ERIC Educational Resources Information Center

Richardson, Jayson W.

2011-01-01

Drawing on Everett Rogers's theory of the diffusion of innovations, this article identifies the barriers, challenges, and successes in the adoption of technology training by teacher trainers in Cambodia. The analysis was based on data collected from an open-ended survey, face-to-face interviews, and document analysis. Findings reveal that the…

Middle School Science and Items of High School Entrance Examination: Examining the Gap in Turkey

ERIC Educational Resources Information Center

Cepni, Salih; Kara, Yilmaz; Cil, Emine

2012-01-01

This study presents findings from an analysis of the Turkish Science and Technology Curriculum Guidelines and their alignment to the university entrance examination. The analysis of the Science and Technology Curriculum focused on various related aspects: content areas and learning outcomes in terms of scientific process skills, science technology…

ICT Capacity Building: A Critical Discourse Analysis of Rwandan Policies from Higher Education Perspective

ERIC Educational Resources Information Center

Byungura, Jean Claude; Hansson, Henrik; Masengesho, Kamuzinzi; Karunaratne, Thashmee

2016-01-01

With the development of technology in the 21st Century, education systems attempt to integrate technology-based tools to improve experiences in pedagogy and administration. It is becoming increasingly prominent to build human and ICT infrastructure capacities at universities from policy to implementation level. Using a critical discourse analysis,…

Technography and Design-Actuality Gap-Analysis of Internet Computer Technologies-Assisted Education: Western Expectations and Global Education

ERIC Educational Resources Information Center

Greenhalgh-Spencer, Heather; Jerbi, Moja

2017-01-01

In this paper, we provide a design-actuality gap-analysis of the internet infrastructure that exists in developing nations and nations in the global South with the deployed internet computer technologies (ICT)-assisted programs that are designed to use internet infrastructure to provide educational opportunities. Programs that specifically…

A Content Analysis of Dissertations in the Field of Educational Technology: The Case of Turkey

ERIC Educational Resources Information Center

Durak, Gurhan; Cankaya, Serkan; Yunkul, Eyup; Misirli, Zeynel Abidin

2018-01-01

The present study aimed at conducting content analysis on dissertations carried out so far in the field of Educational Technology in Turkey. A total of 137 dissertations were examined to determine the key words, academic discipline, research areas, theoretical frameworks, research designs and models, statistical analyses, data collection tools,…

Decision-Making, Information Communication Technology, and Data Analysis by School Leaders about Student Achievement

ERIC Educational Resources Information Center

Akoma, Ahunna Margaux

2012-01-01

This case study of one school district examined how school leaders use student performance data and technology-based data analysis tools to engage in data-informed decision-making for continuous improvement. School leaders in this context included leaders at the district, school, and classroom levels. An extensive literature review provided the…

Aerobots as a Ubiquitous Part of Society

NASA Technical Reports Server (NTRS)

Young, Larry A.

2006-01-01

Small autonomous aerial robots (aerobots) have the potential to make significant positive contributions to modern society. Aerobots of various vehicle-types - CTOL, STOL, VTOL, and even possibly LTA - will be a part of a new paradigm for the distribution of goods and services. Aerobots as a class of vehicles may test the boundaries of aircraft design. New system analysis and design tools will be required in order to account for the new technologies and design parameters/constraints for such vehicles. The analysis tools also provide new approaches to defining/assessing technology goals and objectives and the technology portfolio necessary to accomplish those goals and objectives. Using the aerobot concept as an illustrative test case, key attributes of these analysis tools are discussed.

Adaptation of XMM-Newton SAS to GRID and VO architectures via web

NASA Astrophysics Data System (ADS)

Ibarra, A.; de La Calle, I.; Gabriel, C.; Salgado, J.; Osuna, P.

2008-10-01

The XMM-Newton Scientific Analysis Software (SAS) is a robust software that has allowed users to produce good scientific results since the beginning of the mission. This has been possible given the SAS capability to evolve with the advent of new technologies and adapt to the needs of the scientific community. The prototype of the Remote Interface for Science Analysis (RISA) presented here, is one such example, which provides remote analysis of XMM-Newton data with access to all the existing SAS functionality, while making use of GRID computing technology. This new technology has recently emerged within the astrophysical community to tackle the ever lasting problem of computer power for the reduction of large amounts of data.

New computing systems, future computing environment, and their implications on structural analysis and design

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Housner, Jerrold M.

1993-01-01

Recent advances in computer technology that are likely to impact structural analysis and design of flight vehicles are reviewed. A brief summary is given of the advances in microelectronics, networking technologies, and in the user-interface hardware and software. The major features of new and projected computing systems, including high performance computers, parallel processing machines, and small systems, are described. Advances in programming environments, numerical algorithms, and computational strategies for new computing systems are reviewed. The impact of the advances in computer technology on structural analysis and the design of flight vehicles is described. A scenario for future computing paradigms is presented, and the near-term needs in the computational structures area are outlined.

Automated array assembly task, phase 1

NASA Technical Reports Server (NTRS)

Carbajal, B. G.

1977-01-01

An assessment of state-of-the-art technologies that are applicable to silicon solar cell and solar cell module fabrication is provided. The assessment consists of a technical feasibility evaluation and a cost projection for high-volume production of silicon solar cell modules. The cost projection was approached from two directions; a design-to-cost analysis assigned cost goals to each major process element in the fabrication scheme, and a cost analysis built up projected costs for alternate technologies for each process element. A technical evaluation was used in combination with the cost analysis to identify a baseline low cost process. A novel approach to metal pattern design based on minimum power loss was developed. These design equations were used as a tool in the evaluation of metallization technologies.

The Status of Spacecraft Bus and Platform Technology Development Under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Glaab, Louis; Peterson, Todd

2014-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in three areas that include Propulsion System Technologies, Entry Vehicle Technologies, and Systems Mission Analysis. ISPTs propulsion technologies include: 1) NASAs Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; 2) a Hall-effect electric propulsion (HEP) system for sample return and low cost missions; 3) the Advanced Xenon Flow Control System (AXFS); ultra-lightweight propellant tank technologies (ULTT); and propulsion technologies for a Mars Ascent Vehicle (MAV). The AXFS and ULTT are two component technologies being developed with nearer-term flight infusion in mind, whereas NEXT and the HEP are being developed as EP systems. ISPTs entry vehicle technologies are: 1) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GNC) models of blunt-body rigid aeroshells; and aerothermal effect models; and 2) Multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions. The Systems Mission Analysis area is focused on developing tools and assessing the application of propulsion, entry vehicle, and spacecraft bus technologies to a wide variety of mission concepts. Several of the ISPT technologies are related to sample return missions and other spacecraft bus technology needs like: MAV propulsion, MMEEV, and electric propulsion. These technologies, as well as Aerocapture, are more vehicle and mission-focused, and present a different set of technology development challenges. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, Flagship and sample return missions currently under consideration. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness.

Technology utilization office data base analysis and design

NASA Technical Reports Server (NTRS)

Floyd, Stephen A.

1993-01-01

NASA Headquarters is placing a high priority on the transfer of NASA and NASA contractor developed technologies and expertise to the private sector and to other federal, state and local government organizations. The ultimate objective of these efforts is positive economic impact, an improved quality of life, and a more competitive U.S. posture in international markets. The Technology Utilization Office (TUO) currently serves seven states with its technology transfer efforts. Since 1989, the TUO has handled over one-thousand formal requests for NASA related technologies assistance. The technology transfer process requires promoting public awareness of NASA related soliciting requests for assistance, matching technologies to specific needs, assuring appropriate technology transfer, and monitoring and evaluating the process. Each of these activities have one very important aspect in common: the success of each is dissemination of appropriate high quality information. The purpose of the research was to establish the requirements and develop a preliminary design for a database system to increase the effectiveness and efficiency of the TUO's technology transfer function. The research was conducted following the traditional systems development life cycle methodology and was supported through the use of modern structured analysis techniques. The next section will describe the research and findings as conducted under the life cycle approach.

An economic analysis of private incentives to adopt DNA barcoding technology for fish species authentication in Canada.

PubMed

Ugochukwu, Albert I; Hobbs, Jill E; Phillips, Peter W B; Gray, Richard

2015-12-01

The increasing spate of species substitution and mislabelling in fish markets has become a concern to the public and a challenge to both the food industry and regulators. Species substitution and mislabelling within fish supply chains occurs because of price incentives to misrepresent products for economic gain. Emerging authenticity technologies, such as the DNA barcoding technology that has been used to identify plants and animal (particularly fish) species through DNA sequencing, offer a potential technological solution to this information problem. However, the adoption of these authenticity technologies depends also on economic factors. The present study uses economic welfare analysis to examine the effects of species substitution and mislabelling in fish markets, and examines the feasibility of the technology for a typical retail store in Canada. It is assumed that increased accuracy of the technology in detecting fraud and enforcement of legal penalties and other associated costs would be likely to discourage cheating. Empirical results suggest that DNA barcoding technology would be feasible presently for a typical retail store only if authentication is done in a third party laboratory, as it may not be feasible on an individual retail store level once fixed and other associated costs of the technology are considered.

(Ir)reconcilable differences? The debate concerning nursing and technology.

PubMed

Sandelowski, M

1997-01-01

To review and critique the debate concerning nursing and technology. Technology has been considered both at one and at odds with nursing. Mitcham's (1994) concepts of technological optimism and romanticism. Nursing literature since 1960. Historical analysis. Technological optimists in nursing have viewed technology as an extension of and as readily assimilable into humanistic nursing practice, and nursing as socially advantaged by technology. Technological romantics have viewed technology as irreconcilable with nursing culture, as an expression of masculine culture, and as recirculating existing gender and social inequalities. Both optimists and romantics essentialize technology and nursing, treating the two as singular and fixed entities. The (ir)reconcilability of nursing and technology may be a function of how devices are used by people in different contexts, or of the (ir)reconcilability of views of technology in nursing.

Arthropod Surveillance Programs: Basic Components, Strategies, and Analysis.

PubMed

Cohnstaedt, Lee W; Rochon, Kateryn; Duehl, Adrian J; Anderson, John F; Barrera, Roberto; Su, Nan-Yao; Gerry, Alec C; Obenauer, Peter J; Campbell, James F; Lysyk, Tim J; Allan, Sandra A

2012-03-01

Effective entomological surveillance planning stresses a careful consideration of methodology, trapping technologies, and analysis techniques. Herein, the basic principles and technological components of arthropod surveillance plans are described, as promoted in the symposium "Advancements in arthropod monitoring technology, techniques, and analysis" presented at the 58th annual meeting of the Entomological Society of America in San Diego, CA. Interdisciplinary examples of arthropod monitoring for urban, medical, and veterinary applications are reviewed. Arthropod surveillance consists of the three components: 1) sampling method, 2) trap technology, and 3) analysis technique. A sampling method consists of selecting the best device or collection technique for a specific location and sampling at the proper spatial distribution, optimal duration, and frequency to achieve the surveillance objective. Optimized sampling methods are discussed for several mosquito species (Diptera: Culicidae) and ticks (Acari: Ixodidae). The advantages and limitations of novel terrestrial and aerial insect traps, artificial pheromones and kairomones are presented for the capture of red flour beetle (Coleoptera: Tenebrionidae), small hive beetle (Coleoptera: Nitidulidae), bed bugs (Hemiptera: Cimicidae), and Culicoides (Diptera: Ceratopogonidae) respectively. After sampling, extrapolating real world population numbers from trap capture data are possible with the appropriate analysis techniques. Examples of this extrapolation and action thresholds are given for termites (Isoptera: Rhinotermitidae) and red flour beetles.

Seeing the NICE side of cost-effectiveness analysis: a qualitative investigation of the use of CEA in NICE technology appraisals.

PubMed

Bryan, Stirling; Williams, Iestyn; McIver, Shirley

2007-02-01

Resource scarcity is the raison d'être for the discipline of economics. Thus, the primary purpose of economic analysis is to help decision-makers when addressing problems arising due to the scarcity problem. The research reported here was concerned with how cost-effectiveness information is used by the National Institute for Health & Clinical Excellence (NICE) in national technology coverage decisions in the UK, and how its impact might be increased. The research followed a qualitative case study methodology with semi-structured interviews, supported by observation and analysis of secondary sources. Our research highlights that the technology appraisal function of NICE represents an important progression for the UK health economics community: new cost-effectiveness work is commissioned for each technology and that work directly informs national health policy. However, accountability in policy decisions necessitates that the information upon which decisions are based (including cost-effectiveness analysis, CEA) is accessible. This was found to be a serious problem and represents one of the main ongoing challenges. Other issues highlighted include perceived weaknesses in analysis methods and the poor alignment between the health maximisation objectives assumed in economic analyses and the range of other objectives facing decision-makers in reality. Copyright (c) 2006 John Wiley & Sons, Ltd.

A retrospective analysis of compact fluorescent lamp experience curves and their correlations to deployment programs

DOE PAGES

Smith, Sarah Josephine; Wei, Max; Sohn, Michael D.

2016-09-17

Experience curves are useful for understanding technology development and can aid in the design and analysis of market transformation programs. Here, we employ a novel approach to create experience curves, to examine both global and North American compact fluorescent lamp (CFL) data for the years 1990–2007. We move away from the prevailing method of fitting a single, constant, exponential curve to data and instead search for break points where changes in the learning rate may have occurred. Our analysis suggests a learning rate of approximately 21% for the period of 1990–1997, and 51% and 79% in global and North Americanmore » datasets, respectively, after 1998. We use price data for this analysis; therefore our learning rates encompass developments beyond typical “learning by doing”, including supply chain impacts such as market competition. We examine correlations between North American learning rates and the initiation of new programs, abrupt technological advances, and economic and political events, and find an increased learning rate associated with design advancements and federal standards programs. Our findings support the use of segmented experience curves for retrospective and prospective technology analysis, and may imply that investments in technology programs have contributed to an increase of the CFL learning rate.« less

A retrospective analysis of compact fluorescent lamp experience curves and their correlations to deployment programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Sarah Josephine; Wei, Max; Sohn, Michael D.

Experience curves are useful for understanding technology development and can aid in the design and analysis of market transformation programs. Here, we employ a novel approach to create experience curves, to examine both global and North American compact fluorescent lamp (CFL) data for the years 1990–2007. We move away from the prevailing method of fitting a single, constant, exponential curve to data and instead search for break points where changes in the learning rate may have occurred. Our analysis suggests a learning rate of approximately 21% for the period of 1990–1997, and 51% and 79% in global and North Americanmore » datasets, respectively, after 1998. We use price data for this analysis; therefore our learning rates encompass developments beyond typical “learning by doing”, including supply chain impacts such as market competition. We examine correlations between North American learning rates and the initiation of new programs, abrupt technological advances, and economic and political events, and find an increased learning rate associated with design advancements and federal standards programs. Our findings support the use of segmented experience curves for retrospective and prospective technology analysis, and may imply that investments in technology programs have contributed to an increase of the CFL learning rate.« less

Multimedia Image Technology and Computer Aided Manufacturing Engineering Analysis

NASA Astrophysics Data System (ADS)

Nan, Song

2018-03-01

Since the reform and opening up, with the continuous development of science and technology in China, more and more advanced science and technology have emerged under the trend of diversification. Multimedia imaging technology, for example, has a significant and positive impact on computer aided manufacturing engineering in China. From the perspective of scientific and technological advancement and development, the multimedia image technology has a very positive influence on the application and development of computer-aided manufacturing engineering, whether in function or function play. Therefore, this paper mainly starts from the concept of multimedia image technology to analyze the application of multimedia image technology in computer aided manufacturing engineering.

Status of Propulsion Technology Development Under the NASA In-Space Propulsion Technology Program

NASA Technical Reports Server (NTRS)

Anderson, David; Kamhawi, Hani; Patterson, Mike; Pencil, Eric; Pinero, Luis; Falck, Robert; Dankanich, John

2014-01-01

Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies for NASA's Science Mission Directorate (SMD). These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, Flagship and sample return missions currently under consideration. The ISPT program is currently developing technology in three areas that include Propulsion System Technologies, Entry Vehicle Technologies, and Systems/Mission Analysis. ISPT's propulsion technologies include: 1) the 0.6-7 kW NASA's Evolutionary Xenon Thruster (NEXT) gridded ion propulsion system; 2) a 0.3-3.9kW Halleffect electric propulsion (HEP) system for low cost and sample return missions; 3) the Xenon Flow Control Module (XFCM); 4) ultra-lightweight propellant tank technologies (ULTT); and 5) propulsion technologies for a Mars Ascent Vehicle (MAV). The NEXT Long Duration Test (LDT) recently exceeded 50,000 hours of operation and 900 kg throughput, corresponding to 34.8 MN-s of total impulse delivered. The HEP system is composed of the High Voltage Hall Accelerator (HIVHAC) thruster, a power processing unit (PPU), and the XFCM. NEXT and the HIVHAC are throttle-able electric propulsion systems for planetary science missions. The XFCM and ULTT are two component technologies which being developed with nearer-term flight infusion in mind. Several of the ISPT technologies are related to sample return missions needs: MAV propulsion and electric propulsion. And finally, one focus of the Systems/Mission Analysis area is developing tools that aid the application or operation of these technologies on wide variety of mission concepts. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness.

[Advances in automatic detection technology for images of thin blood film of malaria parasite].

PubMed

Juan-Sheng, Zhang; Di-Qiang, Zhang; Wei, Wang; Xiao-Guang, Wei; Zeng-Guo, Wang

2017-05-05

This paper reviews the computer vision and image analysis studies aiming at automated diagnosis or screening of malaria in microscope images of thin blood film smears. On the basis of introducing the background and significance of automatic detection technology, the existing detection technologies are summarized and divided into several steps, including image acquisition, pre-processing, morphological analysis, segmentation, count, and pattern classification components. Then, the principles and implementation methods of each step are given in detail. In addition, the promotion and application in automatic detection technology of thick blood film smears are put forwarded as questions worthy of study, and a perspective of the future work for realization of automated microscopy diagnosis of malaria is provided.

Methodological Variability Using Electronic Nose Technology For Headspace Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knobloch, Henri; Turner, Claire; Spooner, Andrew

Since the idea of electronic noses was published, numerous electronic nose (e-nose) developments and applications have been used in analyzing solid, liquid and gaseous samples in the food and automotive industry or for medical purposes. However, little is known about methodological pitfalls that might be associated with e-nose technology. Some of the methodological variation caused by changes in ambient temperature, using different filters and changes in mass flow rates are described. Reasons for a lack of stability and reproducibility are given, explaining why methodological variation influences sensor responses and why e-nose technology may not always be sufficiently robust for headspacemore » analysis. However, the potential of e-nose technology is also discussed.« less

Overcoming bias and systematic errors in next generation sequencing data.

PubMed

Taub, Margaret A; Corrada Bravo, Hector; Irizarry, Rafael A

2010-12-10

Considerable time and effort has been spent in developing analysis and quality assessment methods to allow the use of microarrays in a clinical setting. As is the case for microarrays and other high-throughput technologies, data from new high-throughput sequencing technologies are subject to technological and biological biases and systematic errors that can impact downstream analyses. Only when these issues can be readily identified and reliably adjusted for will clinical applications of these new technologies be feasible. Although much work remains to be done in this area, we describe consistently observed biases that should be taken into account when analyzing high-throughput sequencing data. In this article, we review current knowledge about these biases, discuss their impact on analysis results, and propose solutions.

Analysis of Land Subsidence Monitoring in Mining Area with Time-Series Insar Technology

NASA Astrophysics Data System (ADS)

Sun, N.; Wang, Y. J.

2018-04-01

Time-series InSAR technology has become a popular land subsidence monitoring method in recent years, because of its advantages such as high accuracy, wide area, low expenditure, intensive monitoring points and free from accessibility restrictions. In this paper, we applied two kinds of satellite data, ALOS PALSAR and RADARSAT-2, to get the subsidence monitoring results of the study area in two time periods by time-series InSAR technology. By analyzing the deformation range, rate and amount, the time-series analysis of land subsidence in mining area was realized. The results show that InSAR technology could be used to monitor land subsidence in large area and meet the demand of subsidence monitoring in mining area.

Microarray expression technology: from start to finish.

PubMed

Elvidge, Gareth

2006-01-01

The recent introduction of new microarray expression technologies and the further development of established platforms ensure that the researcher is presented with a range of options for performing an experiment. Whilst this has opened up the possibilities for future applications, such as exon-specific arrays, increased sample throughput and 'chromatin immunoprecipitation (ChIP) on chip' experiments, the initial decision processes and experiment planning are made more difficult. This review will give an overview of the various technologies that are available to perform a microarray expression experiment, from the initial planning stages through to the final data analysis. Both practical aspects and data analysis options will be considered. The relative advantages and disadvantages will be discussed with insights provided for future directions of the technology.

Media analysis of the representations of fusion and other future energy technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delicado, Ana; Schmidt, Luisa; Pereira, Sergio

2015-07-01

Media representations of energy have a relevant impact on public opinion and public support for investment in new energy sources. Fusion energy is one among several emerging energy technologies that requires a strong public investment on its research and development. This paper aims to characterise and compare the media representations of fusion and other emerging energy technologies in Portugal and in Spain. The emerging energy technologies selected for analysis are wave and tidal power, hydrogen, deep sea offshore wind power, energy applications of nanotechnology, bio-fuels from microalgae and IV generation nuclear fission. This work covered the news published in amore » selection of newspapers in Portugal and Spain between January 2007 and June 2013. (authors)« less

Analyzing crime scene videos

NASA Astrophysics Data System (ADS)

Cunningham, Cindy C.; Peloquin, Tracy D.

1999-02-01

Since late 1996 the Forensic Identification Services Section of the Ontario Provincial Police has been actively involved in state-of-the-art image capture and the processing of video images extracted from crime scene videos. The benefits and problems of this technology for video analysis are discussed. All analysis is being conducted on SUN Microsystems UNIX computers, networked to a digital disk recorder that is used for video capture. The primary advantage of this system over traditional frame grabber technology is reviewed. Examples from actual cases are presented and the successes and limitations of this approach are explored. Suggestions to companies implementing security technology plans for various organizations (banks, stores, restaurants, etc.) will be made. Future directions for this work and new technologies are also discussed.

Microfluidic technologies for synthetic biology.

PubMed

Vinuselvi, Parisutham; Park, Seongyong; Kim, Minseok; Park, Jung Min; Kim, Taesung; Lee, Sung Kuk

2011-01-01

Microfluidic technologies have shown powerful abilities for reducing cost, time, and labor, and at the same time, for increasing accuracy, throughput, and performance in the analysis of biological and biochemical samples compared with the conventional, macroscale instruments. Synthetic biology is an emerging field of biology and has drawn much attraction due to its potential to create novel, functional biological parts and systems for special purposes. Since it is believed that the development of synthetic biology can be accelerated through the use of microfluidic technology, in this review work we focus our discussion on the latest microfluidic technologies that can provide unprecedented means in synthetic biology for dynamic profiling of gene expression/regulation with high resolution, highly sensitive on-chip and off-chip detection of metabolites, and whole-cell analysis.

Advanced Launch Technology Life Cycle Analysis Using the Architectural Comparison Tool (ACT)

NASA Technical Reports Server (NTRS)

McCleskey, Carey M.

2015-01-01

Life cycle technology impact comparisons for nanolauncher technology concepts were performed using an Affordability Comparison Tool (ACT) prototype. Examined are cost drivers and whether technology investments can dramatically affect the life cycle characteristics. Primary among the selected applications was the prospect of improving nanolauncher systems. As a result, findings and conclusions are documented for ways of creating more productive and affordable nanolauncher systems; e.g., an Express Lane-Flex Lane concept is forwarded, and the beneficial effect of incorporating advanced integrated avionics is explored. Also, a Functional Systems Breakdown Structure (F-SBS) was developed to derive consistent definitions of the flight and ground systems for both system performance and life cycle analysis. Further, a comprehensive catalog of ground segment functions was created.

Techno-economic, location, and carbon emission analysis of thermochemical biomass to transportation fuels

NASA Astrophysics Data System (ADS)

Wright, Mark Mba

There are significant technological and systemic challenges faced by today's advanced biofuel industry. These challenges stem from the current state-of-technology and from the system (consumer market, infrastructure, environment...) in which this emerging industry is being developed. The state-of-technology will improve with continued efforts in technology development, but novel approaches are required to investigate the systemic challenges that limit the adoption of advanced biofuels. The motivation of this dissertation is to address the question of how to find cost-effective, sustainable, and environmentally responsible pathways for the production of biofuels. Economic competitiveness, long-term viability, and benign environmental impact are key for biofuels to be embraced by industry, government, and consumers. Techno-economic, location, and carbon emission analysis are research methodologies that help address each of these issues. The research approach presented in this dissertation is to combine these three methodologies into a holistic study of advanced biofuel technologies. The value of techno-economic, location, and carbon emission analysis is limited when conducted in isolation because of current public perception towards energy technologies. Energy technologies are evaluated based on multiple criteria with a significant emphasis on the three areas investigated in this study. There are important aspects within each of these fields that could significantly limit the value of advances in other fields of study. Therefore, it is necessary that future research in advanced biofuels always consider the systemic challenges faced by novel developments.

Exploration Laboratory Analysis

NASA Technical Reports Server (NTRS)

Krihak, M.; Ronzano, K.; Shaw, T.

2016-01-01

The Exploration Laboratory Analysis (ELA) project supports the Exploration Medical Capability (ExMC) risk to minimize or reduce the risk of adverse health outcomes and decrements in performance due to in-flight medical capabilities on human exploration missions. To mitigate this risk, the availability of inflight laboratory analysis instrumentation has been identified as an essential capability for manned exploration missions. Since a single, compact space-ready laboratory analysis capability to perform all exploration clinical measurements is not commercially available, the ELA project objective is to demonstrate the feasibility of emerging operational and analytical capability as a biomedical diagnostics precursor to long duration manned exploration missions. The initial step towards ground and flight demonstrations in fiscal year (FY) 2015 was the down selection of platform technologies for demonstrations in the space environment. The technologies selected included two Small Business Innovation Research (SBIR) performers: DNA Medicine Institutes rHEALTH X and Intelligent Optical Systems later flow assays combined with Holomics smartphone analyzer. The selection of these technologies were based on their compact size, breadth of analytical capability and favorable ability to process fluids in a space environment, among several factors. These two technologies will be advanced to meet ground and flight demonstration success criteria and requirements that will be finalized in FY16. Also, the down selected performers will continue the technology development phase towards meeting prototype deliverables in either late 2016 or 2017.

Liquid biopsy on chip: a paradigm shift towards the understanding of cancer metastasis.

PubMed

Tadimety, Amogha; Syed, Abeer; Nie, Yuan; Long, Christina R; Kready, Kasia M; Zhang, John X J

2017-01-23

This comprehensive review serves as a guide for developing scalable and robust liquid biopsies on chip for capture, detection, and analysis of circulating tumor cells (CTCs). Liquid biopsy, the detection of biomarkers from body fluids, has proven challenging because of CTC rarity and the heterogeneity of CTCs shed from tumors. The review starts with the underlying biological mechanisms that make liquid biopsy a challenge before moving into an evaluation of current technological progress. Then, a framework for evaluation of the technologies is presented with special attention to throughput, capture rate, and cell viability for analysis. Technologies for CTC capture, detection, and analysis will be evaluated based on these criteria, with a focus on current approaches, limitations and future directions. The paper provides a critical review for microchip developers as well as clinical investigators to build upon the existing progress towards the goal of designing CTC capture, detection, and analysis platforms.

1990 fuel cell seminar: Program and abstracts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-31

This volume contains author prepared short resumes of the presentations at the 1990 Fuel Cell Seminar held November 25-28, 1990 in Phoenix, Arizona. Contained herein are 134 short descriptions organized into topic areas entitled An Environmental Overview, Transportation Applications, Technology Advancements for Molten Carbonate Fuel Cells, Technology Advancements for Solid Fuel Cells, Component Technologies and Systems Analysis, Stationary Power Applications, Marine and Space Applications, Technology Advancements for Acid Type Fuel Cells, and Technology Advancement for Solid Oxide Fuel Cells.

Applying observations from technological transformations in complex adaptive systems to inform health policy on technology adoption.

PubMed

Phillips, Andrew B; Merrill, Jacqueline

2012-01-01

Many complex markets such as banking and manufacturing have benefited significantly from technology adoption. Each of these complex markets experienced increased efficiency, quality, security, and customer involvement as a result of technology transformation in their industry. Healthcare has not benefited to the same extent. We provide initial findings from a policy analysis of complex markets and the features of these transformations that can influence health technology adoption and acceptance.

Stress and Displacement Analysis of Microreactors during Thermal and Vacuum Loading

DTIC Science & Technology

2017-09-07

and extend the available energy density well beyond state-of-the-art battery technology (140 W·h/kg for rechargeable lithium [Li]- ion technology).1...time. In the 10–100 W+ power range, battery technology is the best solution currently available, but higher-energy dense technologies are needed to...augment batteries and extend the available energy density well beyond state-of-the-art battery technology. One way to approach this is to take

Industrial benefits and future expectations in materials and processes resulting from space technology

NASA Technical Reports Server (NTRS)

Meyer, J. D.

1977-01-01

Space technology transfer is discussed as applied to the field of materials science. Advances made in processing include improved computer techniques, and structural analysis. Technology transfer is shown to have an important impact potential in the overall productivity of the United States.

An Analysis of Instructional Design and Technology Departments

ERIC Educational Resources Information Center

West, Richard E.; Thomas, Rebecca A.; Bodily, Robert; Wright, Casey; Borup, Jered

2017-01-01

In this paper we explore the academic productivity of universities in the field of Instructional Design and Technology according to three types of publically available data: (1) publication in 20 leading journals, (2) representation in the "Handbook of Educational Communications Technology," and (3) reception of professional organization…

Application of Technology to Cognitive Development.

ERIC Educational Resources Information Center

Wilson, Louise

This report presents a summary of research being conducted at the University of Minnesota in which new technologies are being applied to development of cognition in hearing impaired learners. The study involved an application of concept analysis, information-processing theories, and group-based interactive technology in the teaching of…

Analysis of Relationships between Technological Pedagogical Content Knowledge and Educational Internet Use

ERIC Educational Resources Information Center

Sahin, Ismail; Celik, Ismail; Akturk, Ahmet Oguz; Aydin, Mustafa

2013-01-01

This study analyzes the relationships between preservice teachers' technological pedagogical content knowledge (TPACK) and their self-efficacy beliefs in educational Internet use. Findings show statistically significant relationships among the knowledge domains in technology, pedagogy, content, and their intersections. Also, results from the…

Geospatial Technologies and Higher Education in Argentina

ERIC Educational Resources Information Center

Leguizamon, Saturnino

2010-01-01

The term "geospatial technologies" encompasses a large area of fields involving cartography, spatial analysis, geographic information system, remote sensing, global positioning systems and many others. These technologies should be expected to be available (as "natural tools") for a country with a large surface and a variety of…