Tissue distribution and developmental expression of type XVI collagen in the mouse.

PubMed

Lai, C H; Chu, M L

1996-04-01

The expression of a recently identified collagen, alpha 1 (XVI), in adult mouse tissue and developing mouse embryo was examined by immunohistochemistry and in situ hybridization. A polyclonal antiserum was raised against a recombinant fusion protein, which contained a segment of 161 amino acids in the N-terminal noncollagenous domain of the human alpha 1 (XVI) collagen. Immunoprecipitation of metabolically labelled human or mouse fibroblast cell lysates with this antibody revealed a major, bacterial collagenase sensitive polypeptide of approximately 210 kDa. The size agrees with the prediction from the full-length cDNA. Immunofluorescence examination of adult mouse tissues using the affinity purified antibody revealed a rather broad distribution of the protein. The heart, kidney, intestine, ovary, testis, eye, arterial walls and smooth muscles all exhibited significant levels of expression, while the skeletal muscle, lung and brain showed very restricted and low signals. During development, no significant expression of the mRNA or protein was observed in embryo of day 8 of gestation, but strong signals was detected in placental trophoblasts. Expression in embryos was detectable first after day 11 of gestation with weak positive signals appearing in the heart. In later stages of development, stronger RNA hybridizations were observed in a variety of tissues, particularly in atrial and ventricular walls of the developing heart, spinal root neural fibers and skin. These data demonstrate that type XVI collagen represents another collagenous component widely distributed in the extracellular matrix and may contribute to the structural integrity of various tissues.

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

49 CFR 229.209 - Alternative locomotive crashworthiness designs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Alternative locomotive crashworthiness designs... Locomotive Crashworthiness Design Requirements § 229.209 Alternative locomotive crashworthiness designs. (a... locomotive crashworthiness designs which are not consistent with any FRA-approved locomotive crashworthiness...

49 CFR 229.209 - Alternative locomotive crashworthiness designs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Alternative locomotive crashworthiness designs... Locomotive Crashworthiness Design Requirements § 229.209 Alternative locomotive crashworthiness designs. (a... locomotive crashworthiness designs which are not consistent with any FRA-approved locomotive crashworthiness...

49 CFR 229.209 - Alternative locomotive crashworthiness designs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Alternative locomotive crashworthiness designs... Locomotive Crashworthiness Design Requirements § 229.209 Alternative locomotive crashworthiness designs. (a... locomotive crashworthiness designs which are not consistent with any FRA-approved locomotive crashworthiness...

49 CFR 229.209 - Alternative locomotive crashworthiness designs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Alternative locomotive crashworthiness designs... Locomotive Crashworthiness Design Requirements § 229.209 Alternative locomotive crashworthiness designs. (a... locomotive crashworthiness designs which are not consistent with any FRA-approved locomotive crashworthiness...

45 CFR 233.145 - Expiration of medical assistance programs under titles I, IV-A, X, XIV and XVI of the Social...

Code of Federal Regulations, 2014 CFR

2014-10-01

... titles I, IV-A, X, XIV and XVI of the Social Security Act. 233.145 Section 233.145 Public Welfare... FINANCIAL ASSISTANCE PROGRAMS § 233.145 Expiration of medical assistance programs under titles I, IV-A, X..., enacted July 30, 1965, no payment may be made to any State under title I, IV-A, X, XIV or XVI of the...

45 CFR 233.145 - Expiration of medical assistance programs under titles I, IV-A, X, XIV and XVI of the Social...

Code of Federal Regulations, 2010 CFR

2010-10-01

... titles I, IV-A, X, XIV and XVI of the Social Security Act. 233.145 Section 233.145 Public Welfare... FINANCIAL ASSISTANCE PROGRAMS § 233.145 Expiration of medical assistance programs under titles I, IV-A, X..., enacted July 30, 1965, no payment may be made to any State under title I, IV-A, X, XIV or XVI of the...

45 CFR 233.145 - Expiration of medical assistance programs under titles I, IV-A, X, XIV and XVI of the Social...

Code of Federal Regulations, 2011 CFR

2011-10-01

... titles I, IV-A, X, XIV and XVI of the Social Security Act. 233.145 Section 233.145 Public Welfare... FINANCIAL ASSISTANCE PROGRAMS § 233.145 Expiration of medical assistance programs under titles I, IV-A, X..., enacted July 30, 1965, no payment may be made to any State under title I, IV-A, X, XIV or XVI of the...

45 CFR 233.145 - Expiration of medical assistance programs under titles I, IV-A, X, XIV and XVI of the Social...

Code of Federal Regulations, 2012 CFR

2012-10-01

... titles I, IV-A, X, XIV and XVI of the Social Security Act. 233.145 Section 233.145 Public Welfare... FINANCIAL ASSISTANCE PROGRAMS § 233.145 Expiration of medical assistance programs under titles I, IV-A, X..., enacted July 30, 1965, no payment may be made to any State under title I, IV-A, X, XIV or XVI of the...

45 CFR 233.145 - Expiration of medical assistance programs under titles I, IV-A, X, XIV and XVI of the Social...

Code of Federal Regulations, 2013 CFR

2013-10-01

... titles I, IV-A, X, XIV and XVI of the Social Security Act. 233.145 Section 233.145 Public Welfare... FINANCIAL ASSISTANCE PROGRAMS § 233.145 Expiration of medical assistance programs under titles I, IV-A, X..., enacted July 30, 1965, no payment may be made to any State under title I, IV-A, X, XIV or XVI of the...

Alternative Natural Energy Sources in Building Design.

ERIC Educational Resources Information Center

Davis, Albert J.; Schubert, Robert P.

This publication provides a discussion of various energy conserving building systems and design alternatives. The information presented here covers alternative space and water heating systems, and energy conserving building designs incorporating these systems and other energy conserving techniques. Besides water, wind, solar, and bio conversion…

40 CFR 72.22 - Alternate designated representative.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the term “designated representative” is used under the Acid Rain Program, the term shall be construed...), whenever the term “alternate designated representative” is used under the Acid Rain Program, the term shall... used under the Acid Rain Program, the term shall be construed to include either of the alternate...

40 CFR 72.22 - Alternate designated representative.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the term “designated representative” is used under the Acid Rain Program, the term shall be construed...), whenever the term “alternate designated representative” is used under the Acid Rain Program, the term shall...” is used under the Acid Rain Program, the term shall be construed to include either of the alternate...

40 CFR 72.22 - Alternate designated representative.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the term “designated representative” is used under the Acid Rain Program, the term shall be construed...), whenever the term “alternate designated representative” is used under the Acid Rain Program, the term shall...” is used under the Acid Rain Program, the term shall be construed to include either of the alternate...

40 CFR 72.22 - Alternate designated representative.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the term “designated representative” is used under the Acid Rain Program, the term shall be construed...), whenever the term “alternate designated representative” is used under the Acid Rain Program, the term shall...” is used under the Acid Rain Program, the term shall be construed to include either of the alternate...

40 CFR 72.22 - Alternate designated representative.

Code of Federal Regulations, 2011 CFR

2011-07-01

... the term “designated representative” is used under the Acid Rain Program, the term shall be construed...), whenever the term “alternate designated representative” is used under the Acid Rain Program, the term shall...” is used under the Acid Rain Program, the term shall be construed to include either of the alternate...

Designing oligo libraries taking alternative splicing into account

NASA Astrophysics Data System (ADS)

Shoshan, Avi; Grebinskiy, Vladimir; Magen, Avner; Scolnicov, Ariel; Fink, Eyal; Lehavi, David; Wasserman, Alon

2001-06-01

We have designed sequences for DNA microarrays and oligo libraries, taking alternative splicing into account. Alternative splicing is a common phenomenon, occurring in more than 25% of the human genes. In many cases, different splice variants have different functions, are expressed in different tissues or may indicate different stages of disease. When designing sequences for DNA microarrays or oligo libraries, it is very important to take into account the sequence information of all the mRNA transcripts. Therefore, when a gene has more than one transcript (as a result of alternative splicing, alternative promoter sites or alternative poly-adenylation sites), it is very important to take all of them into account in the design. We have used the LEADS transcriptome prediction system to cluster and assemble the human sequences in GenBank and design optimal oligonucleotides for all the human genes with a known mRNA sequence based on the LEADS predictions.

Brayton heat exchanger unit development program (alternate design)

NASA Technical Reports Server (NTRS)

Duncan, J. D.; Gibson, J. C.; Graves, R. F.; Morse, C. J.; Richard, C. E.

1973-01-01

A Brayton Heat Exchanger Unit Alternate Design (BHXU-Alternate) consisting of a recuperator, a heat sink heat exchanger, and a gas ducting system, was designed and fabricated. The design was formulated to provide a high performance unit suitable for use in a long-life Brayton-cycle powerplant. Emphasis was on double containment against external leakage and leakage of the organic coolant into the gas stream. A parametric analysis and design study was performed to establish the optimum component configurations to achieve low weight and size and high reliability, while meeting the requirements of high effectiveness and low pressure drop. Layout studies and detailed mechanical and structural design were performed to obtain a flight-type packaging arrangement, including the close-coupled integration of the BHXU-Alternate with the Brayton Rotating Unit (BRU).

PREFACE: Symmetries in Science XVI

NASA Astrophysics Data System (ADS)

2014-10-01

This volume of the proceedings ''Symmetries in Science XVI'' is dedicated to the memory of Miguel Lorente and Allan Solomon who both participated several times in these Symposia. We lost not only two great scientists and colleagues, but also two wonderful persons of high esteem whom we will always remember. Dieter Schuch, Michael Ramek There is a German saying ''all good things come in threes'' and ''Symmetries in Science XVI'', convened July 20-26, 2013 at the Mehrerau Monastery, was our third in the sequel of these symposia since taking it over from founder Bruno Gruber who instigated it in 1988 (then in Lochau). Not only the time seemed to have been perfect (one week of beautiful sunshine), but also the medley of participants could hardly have been better. This time, 34 scientists from 16 countries (more than half outside the European Union) came together to report and discuss their latest results in various fields of science, all related to symmetries. The now customary grouping of renowned experts and talented newcomers was very rewarding and stimulating for all. The informal, yet intense, discussions at ''Gasthof Lamm'' occurred (progressively later) each evening till well after midnight and finally till almost daybreak! However, prior to the opening ceremony and during the conference, respectively, we were informed that Miguel Lorente and Allan Solomon had recently passed away. Both attended the SIS Symposia several times and had many friends among present and former participants. Professor Peter Kramer, himself a long-standing participant and whose 80th birthday commemoration prevented him from attending SIS XVI, kindly agreed to write the obituary for Miguel Lorente. Professors Richard Kerner and Carol Penson (both also former attendees) penned, at very short notice, the tribute to Allan Solomon. The obituaries are included in these Proceedings and further tributes have been posted to our conference website. In 28 lectures and an evening poster

Field test of an alternative longwall gate road design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, R.M.; Vandergrift, T.L.; McDonnell, J.P.

1994-01-01

The US Bureau of Mines (USBM) MULSIM/ML modeling technique has been used to analyze anticipated stress distributions for a proposed alternative longwall gate road design for a western Colorado coal mine. The model analyses indicated that the alternative gate road design would reduce stresses in the headgate entry. To test the validity of the alternative gate road design under actual mining conditions, a test section of the alternative system was incorporated into a subsequent set of gate roads developed at the mine. The alternative gate road test section was instrumented with borehole pressure cells, as part of an ongoing USBMmore » research project to monitor ground pressure changes as longwall mining progressed. During the excavation of the adjacent longwall panels, the behavior of the alternative gate road system was monitored continuously using the USBM computer-assisted Ground Control Management System. During these field tests, the alternative gate road system was first monitored and evaluated as a headgate, and later monitored and evaluated as a tailgate. The results of the field tests confirmed the validity of using the MULSIM/NL modeling technique to evaluate mine designs.« less

31 CFR 0.104 - Designated Agency Ethics Official and Alternate Designated Agency Ethics Official.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance: Treasury 1 2011-07-01 2011-07-01 false Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. 0.104 Section 0.104 Money and Finance: Treasury Office of the... Responsibilities § 0.104 Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. The...

31 CFR 0.104 - Designated Agency Ethics Official and Alternate Designated Agency Ethics Official.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. 0.104 Section 0.104 Money and Finance: Treasury Office of the... Responsibilities § 0.104 Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. The...

31 CFR 0.104 - Designated Agency Ethics Official and Alternate Designated Agency Ethics Official.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance: Treasury 1 2013-07-01 2013-07-01 false Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. 0.104 Section 0.104 Money and Finance: Treasury Office of the... Responsibilities § 0.104 Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. The...

31 CFR 0.104 - Designated Agency Ethics Official and Alternate Designated Agency Ethics Official.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance: Treasury 1 2014-07-01 2014-07-01 false Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. 0.104 Section 0.104 Money and Finance: Treasury Office of the... Responsibilities § 0.104 Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. The...

31 CFR 0.104 - Designated Agency Ethics Official and Alternate Designated Agency Ethics Official.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance: Treasury 1 2012-07-01 2012-07-01 false Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. 0.104 Section 0.104 Money and Finance: Treasury Office of the... Responsibilities § 0.104 Designated Agency Ethics Official and Alternate Designated Agency Ethics Official. The...

20 CFR 416.1535 - Services in a proceeding under title XVI of the Act.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Services in a proceeding under title XVI of the Act. 416.1535 Section 416.1535 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY INCOME FOR THE AGED, BLIND, AND DISABLED Representation of Parties § 416.1535 Services in a...

20 CFR 416.1535 - Services in a proceeding under title XVI of the Act.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Services in a proceeding under title XVI of the Act. 416.1535 Section 416.1535 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL SECURITY INCOME FOR THE AGED, BLIND, AND DISABLED Representation of Parties § 416.1535 Services in a...

29 CFR 2703.2 - Designated agency ethics official and alternate designated agency ethics official.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 9 2011-07-01 2011-07-01 false Designated agency ethics official and alternate designated agency ethics official. 2703.2 Section 2703.2 Labor Regulations Relating to Labor (Continued) FEDERAL... agency ethics official and alternate designated agency ethics official. The Chairman shall appoint an...

29 CFR 2703.2 - Designated agency ethics official and alternate designated agency ethics official.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Designated agency ethics official and alternate designated agency ethics official. 2703.2 Section 2703.2 Labor Regulations Relating to Labor (Continued) FEDERAL... agency ethics official and alternate designated agency ethics official. The Chairman shall appoint an...

29 CFR 2703.2 - Designated agency ethics official and alternate designated agency ethics official.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 9 2013-07-01 2013-07-01 false Designated agency ethics official and alternate designated agency ethics official. 2703.2 Section 2703.2 Labor Regulations Relating to Labor (Continued) FEDERAL... agency ethics official and alternate designated agency ethics official. The Chairman shall appoint an...

29 CFR 2703.2 - Designated agency ethics official and alternate designated agency ethics official.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 9 2014-07-01 2014-07-01 false Designated agency ethics official and alternate designated agency ethics official. 2703.2 Section 2703.2 Labor Regulations Relating to Labor (Continued) FEDERAL... agency ethics official and alternate designated agency ethics official. The Chairman shall appoint an...

29 CFR 2703.2 - Designated agency ethics official and alternate designated agency ethics official.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 9 2012-07-01 2012-07-01 false Designated agency ethics official and alternate designated agency ethics official. 2703.2 Section 2703.2 Labor Regulations Relating to Labor (Continued) FEDERAL... agency ethics official and alternate designated agency ethics official. The Chairman shall appoint an...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Alternate design considerations. 116.340 Section 116.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS CONSTRUCTION AND ARRANGEMENT Hull Structure § 116.340 Alternate...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Alternate design considerations. 116.340 Section 116.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS CONSTRUCTION AND ARRANGEMENT Hull Structure § 116.340 Alternate...

40 CFR 96.212 - Changing CAIR designated representative and alternate CAIR designated representative; changes in...

Code of Federal Regulations, 2010 CFR

2010-07-01

... BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS FOR STATE IMPLEMENTATION PLANS CAIR Designated Representative for CAIR SO2 Sources § 96.212 Changing CAIR designated representative and alternate... CAIR SO2 source and the CAIR SO2 units at the source. (b) Changing alternate CAIR designated...

40 CFR 96.211 - Alternate CAIR designated representative.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS (CONTINUED) NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS FOR STATE IMPLEMENTATION PLANS CAIR Designated Representative for CAIR SO2 Sources § 96.211 Alternate CAIR designated...

40 CFR 97.211 - Alternate CAIR designated representative.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROGRAMS (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS CAIR Designated Representative for CAIR SO2 Sources § 97.211 Alternate CAIR designated representative. (a) A...

20 CFR 416.590 - Are there additional methods for recovery of title XVI benefit overpayments?

Code of Federal Regulations, 2010 CFR

2010-04-01

... entered into such an arrangement, you have failed to make any payment for two consecutive months. (3) You... those sections, we have determined that we will not waive collection of the overpayment. (4) You have... may recover an overpayment under title XVI of the Act from you under the rules in subparts D and E of...

Analysis of Alternative Ring Resonator Designs

DTIC Science & Technology

2014-08-01

the ring strip of the antenna as in the case of the original design. Both the alternative dielectric laminate and the increased thickness laminate...adjustments to the geometry parameters. 2. Ring Resonator Antenna Design The ring resonator is a two port antenna consisting of a ring strip and two...for various soil sample depths indicates that most of the measureable response is from within 2 mm of the resonator antenna strip surface. For the

Alternating phase-shifted mask for logic gate levels, design, and mask manufacturing

NASA Astrophysics Data System (ADS)

Liebmann, Lars W.; Graur, Ioana C.; Leipold, William C.; Oberschmidt, James M.; O'Grady, David S.; Regaill, Denis

1999-07-01

While the benefits of alternating phase shifted masks in improving lithographic process windows at increased resolution are well known throughout the lithography community, broad implementation of this potentially powerful technique has been slow due to the inherent complexity of the layout design and mask manufacturing process. This paper will review a project undertaken at IBM's Semiconductor Research and Development Center and Mask Manufacturing and Development facility to understand the technical and logistical issues associated with the application of alternating phase shifted mask technology to the gate level of a full microprocessor chip. The work presented here depicts an important milestone toward integration of alternating phase shifted masks into the manufacturing process by demonstrating an automated design solution and yielding a functional alternating phase shifted mask. The design conversion of the microprocessor gate level to a conjugate twin shifter alternating phase shift layout was accomplished with IBM's internal design system that automatically scaled the design, added required phase regions, and resolved phase conflicts. The subsequent fabrication of a nearly defect free phase shifted mask, as verified by SEM based die to die inspection, highlights the maturity of the alternating phase shifted mask manufacturing process in IBM's internal mask facility. Well defined and recognized challenges in mask inspection and repair remain and the layout of alternating phase shifted masks present a design and data preparation overhead, but the data presented here demonstrate the feasibility of designing and building manufacturing quality alternating phase shifted masks for the gate level of a microprocessor.

Alternate Design of ITER Cryostat Skirt Support System

NASA Astrophysics Data System (ADS)

Pandey, Manish Kumar; Jha, Saroj Kumar; Gupta, Girish Kumar; Bhattacharya, Avik; Jogi, Gaurav; Bhardwaj, Anil Kumar

2017-04-01

The skirt support of ITER cryostat is a support system which takes all the load of cryostat cylinder and dome during normal and operational condition. The present design of skirt support has full penetration weld joints at the bottom (shell to horizontal plate joint). To fulfil the requirements of tolerances and control the welding distortions, we have proposed to change the full penetration weld into fillet weld. A detail calculation is done to check the feasibility and structural impact due to proposed design. The calculations provide the size requirements of fillet weld. To verify the structural integrity during most severe load case, finite element analysis (FEA) has been done in line with ASME section VIII division 2 [1]. By FEA ‘Plastic Collapse’ and ‘Local Failure’ modes has been assessed. 5° sector of skirt clamp has been modelled in CATIA V5 R21 and used in FEA. Fillet weld at shell to horizontal plate joint has been modelled and symmetry boundary condition at ± 2.5° applied. ‘Elastic Plastic Analysis’ has been performed for the most severe loading case i.e. Category IV loading. The alternate design of Cryostat Skirt support system has been found safe by analysis against Plastic collapse and Local Failure Modes with load proportionality factor 2.3. Alternate design of Cryostat skirt support system has been done and validated by FEA. As per alternate design, the proposal of fillet weld has been implemented in manufacturing.

78 FR 9987 - Social Security Ruling, SSR 13-1p; Titles II and XVI: Agency Processes for Addressing Allegations...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2012-0071] Social Security Ruling, SSR 13-1p; Titles II and XVI: Agency Processes for Addressing Allegations of Unfairness, Prejudice, Partiality, Bias, Misconduct, or Discrimination by Administrative Law Judges (ALJs); Correction AGENCY: Social Security...

Permanent-magnet linear alternators. I - Fundamental equations. II - Design guidelines

NASA Astrophysics Data System (ADS)

Boldea, I.; Nasar, S. A.

1987-01-01

The general equations of permanent-magnet heteropolar three-phase and single-phase linear alternators, powered by free-piston Stirling engines, are presented, with application to space power stations and domestic applications including solar power plants. The equations are applied to no-load and short-circuit conditions, illustrating the end-effect caused by the speed-reversal process. In the second part, basic design guidelines for a three-phase tubular linear alternator are given, and the procedure is demonstrated with the numerical example of the design of a 25-kVA, 14.4-m/s, 120/220-V, 60-Hz alternator.

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

MEASUREMENT AND MODELING OF Na-LIKE Fe XVI INNER-SHELL SATELLITES BETWEEN 14.5 A AND 18 A

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graf, A.; Beiersdorfer, P.; Brown, G. V.

2009-04-20

We have used the University of California Lawrence Livermore National Laboratory's EBIT-I electron beam ion trap to perform measurements of the wavelengths and relative intensities of the X-ray lines from inner-shell satellite transitions in sodium-like Fe XVI. The measurements were carried out with high-resolution crystal and grating spectrometers and covered the 14.5-18 A wavelength band. In contrast to some predicted line strengths and positions found in the literature, our results show that the strongest relatively unblended inner-shell satellites of Fe XVI are located near 15.2 A. This is near the location of the 3d{yields} 2p intercombination line in Fe XVII.more » Calculations using the Flexible Atomic Code (FAC) are presented. The average deviation between the EBIT-I measurements and the FAC calculations for the wavelength positions and line ratios are 22 mA and a factor of 2.3, respectively, where the average is taken over the ten features included in this work.« less

MCC Guest Viewing Program of Pope Benedict XVI's call to the ISS/STS-134 crew.

NASA Image and Video Library

2011-05-21

JSC2011-E-046602 (21 May 2011) --- A group of guests in the viewing room of the Mission Control Center at NASA?s Johnson Space Center are pictured during a special call from Pope Benedict XVI (visible on the monitors) to the STS-134 and Expedition 27 crews on the International Space Station. The event was conducted from The Vatican at 6:11 a.m. (CDT) on May 21, 2011, and aired live on NASA television. Photo credit: NASA

An alternative tensiometer design for deep vadose zone monitoring

NASA Astrophysics Data System (ADS)

Moradi, A. B.; Kandelous, M. M.; Hopmans, J. W.

2015-12-01

The conventional tensiometer is among the most accurate devices for soil water matric potential measurements, as well as for estimations of soil water flux from soil water potential gradients. Uncertainties associated with conventional tensiometers such as caused by ambient temperature effects and the draining of the tensiometer tube, as well as their limitation for deep soil monitoring has prevented their widespread use for vadose zone monitoring, despite their superior accuracy, in general. We introduce an alternative tensiometer design that offers the accuracy of the conventional tensiometer, while minimizing afore-mentioned uncertainties and limitations. The proposed alternative tensiometer largely eliminates temperature-induced diurnal fluctuations and uncertainties associated with the draining of the tensiometer tube, and removes the limitation in installation depth. In addition, the manufacturing costs of this alternative tensiometer design is close to that of the conventional tensiometer, while it is especially suited for monitoring of soil water potential gradients as required for soil water flux measurements.

49 CFR 451.14 - Alternative approval of new containers by design type.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Approval of New Containers § 451.14 Alternative approval of new containers by design type. (a) New... 49 Transportation 6 2010-10-01 2010-10-01 false Alternative approval of new containers by design...

49 CFR 451.14 - Alternative approval of new containers by design type.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Approval of New Containers § 451.14 Alternative approval of new containers by design type. (a) New... 49 Transportation 6 2013-10-01 2013-10-01 false Alternative approval of new containers by design...

49 CFR 451.14 - Alternative approval of new containers by design type.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Approval of New Containers § 451.14 Alternative approval of new containers by design type. (a) New... 49 Transportation 6 2012-10-01 2012-10-01 false Alternative approval of new containers by design...

49 CFR 451.14 - Alternative approval of new containers by design type.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Approval of New Containers § 451.14 Alternative approval of new containers by design type. (a) New... 49 Transportation 6 2014-10-01 2014-10-01 false Alternative approval of new containers by design...

49 CFR 451.14 - Alternative approval of new containers by design type.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) COAST GUARD, DEPARTMENT OF HOMELAND SECURITY SAFETY APPROVAL OF CARGO CONTAINERS TESTING AND APPROVAL OF CONTAINERS Approval of New Containers § 451.14 Alternative approval of new containers by design type. (a) New... 49 Transportation 6 2011-10-01 2011-10-01 false Alternative approval of new containers by design...

Refuge alternatives relief valve testing and design

PubMed Central

Lutz, T.J.; Bissert, P.T.; Homce, G.T.; Yonkey, J.A.

2016-01-01

The U.S. National Institute for Occupational Safety and Health (NIOSH) has been researching refuge alternatives (RAs) since 2007. RAs typically have built-in pressure relief valves (PRVs) to prevent the unit from reaching unsafe pressures. The U.S. Mine Safety and Health Administration requires that these valves vent the chamber at a maximum pressure of 1.25 kPa (0.18 psi, 5.0 in. H2O), or as specified by the manufacturer, above mine atmospheric pressure in the RA. To facilitate PRV testing, an instrumented benchtop test fixture was developed using an off-the-shelf centrifugal blower and ductwork. Relief pressures and flow characteristics were measured for three units: (1) a modified polyvinyl chloride check valve, (2) an off-the-shelf brass/cast-iron butterfly check valve and (3) a commercially available valve that was designed specifically for one manufacturer’s steel prefabricated RAs and had been adapted for use in one mine operator’s built-in-place RA. PRVs used in tent-style RAs were not investigated. The units were tested with different modifications and configurations in order to check compliance with Title 30 Code of Federal Regulations, or 30 CFR, regulations. The commercially available relief valve did not meet the 30 CFR relief pressure specification but may meet the manufacturer’s specification. Alternative valve designs were modified to meet the 30 CFR relief pressure specification, but all valve designs will need further design research to examine survivability in the event of a 103 kPa (15.0 psi) impulse overpressure during a disaster. PMID:28018003

46 CFR 160.027-7 - Pre-approval tests for alternate platform designs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Pre-approval tests for alternate platform designs. 160... § 160.027-7 Pre-approval tests for alternate platform designs. (a) The tests in this section are for... deformation as a result of this test. (c) The float body must be supported so that the platform is suspended...

46 CFR 160.027-7 - Pre-approval tests for alternate platform designs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 6 2011-10-01 2011-10-01 false Pre-approval tests for alternate platform designs. 160... § 160.027-7 Pre-approval tests for alternate platform designs. (a) The tests in this section are for... deformation as a result of this test. (c) The float body must be supported so that the platform is suspended...

46 CFR 160.027-7 - Pre-approval tests for alternate platform designs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Pre-approval tests for alternate platform designs. 160... § 160.027-7 Pre-approval tests for alternate platform designs. (a) The tests in this section are for... deformation as a result of this test. (c) The float body must be supported so that the platform is suspended...

46 CFR 160.027-7 - Pre-approval tests for alternate platform designs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Pre-approval tests for alternate platform designs. 160... § 160.027-7 Pre-approval tests for alternate platform designs. (a) The tests in this section are for... deformation as a result of this test. (c) The float body must be supported so that the platform is suspended...

46 CFR 160.027-7 - Pre-approval tests for alternate platform designs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 6 2012-10-01 2012-10-01 false Pre-approval tests for alternate platform designs. 160... § 160.027-7 Pre-approval tests for alternate platform designs. (a) The tests in this section are for... deformation as a result of this test. (c) The float body must be supported so that the platform is suspended...

MCC Guest Viewing Program of Pope Benedict XVI's call to the ISS/STS-134 crew.

NASA Image and Video Library

2011-05-21

JSC2011-E-046605 (21 May 2011) --- His Eminence Daniel Cardinal DiNardo, Archbishop of Galveston-Houston, speaks to a group of guests in the viewing room of the Mission Control Center at NASA?s Johnson Space Center following a special call from Pope Benedict XVI to the STS-134 and Expedition 27 crews on the International Space Station. The event was conducted from The Vatican at 6:11 a.m. (CDT) on May 21, 2011, and aired live on NASA television. Photo credit: NASA

40 CFR 97.212 - Changing CAIR designated representative and alternate CAIR designated representative; changes in...

Code of Federal Regulations, 2010 CFR

2010-07-01

...) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS CAIR Designated Representative for CAIR SO2 Sources § 97.212 Changing CAIR designated representative and alternate CAIR designated... representative and the owners and operators of the CAIR SO2 source and the CAIR SO2 units at the source. (b...

[Menarche, menstrual and sociodemographic characteristics of Puerto Rican female athletes in the XV and XVI Central American and Caribbean Games].

PubMed

Rivera, M A; Mendez Zamora, I; Matos, R M; Rivera, A

1993-09-01

This investigation described maturation, menstrual and socio-demographic characteristics of 65 Puerto Rican women athletes that were interviewed during the XVI Central American and Caribbean Games (CACG), Mexico City in 1990. The results were compared with those of Puerto Rican women athletes (n = 52) at the XV CACG, Santiago Dominican Republic, 1986. The quantitative variables (age, age at initiation of training, years of training, age at menarche, birth order, and family size) were not statistically different (t-independent, p > or = 0.05). The observed frequencies for the qualitative variables (menstrual characteristics, degree of certainty in the recall of age of menarche, use of oral contraceptives, and marital status) were very similar. the women at the XVI CAC in Mexico demonstrated similar maturational, menstrual and socio-demographic characteristics to the those athletes evaluated four years earlier in Santiago and based on their long history of training, both samples were representative of athletically mature athletes. The findings were very similar to those reported for olympic athletes and such data expands the available information on Puerto Rican women athletes.

Locomotive cab design development. Volume 1 : analysis of locomotive cab environment & development of cab design alternatives

DOT National Transportation Integrated Search

1976-10-01

This report presents an analysis of the line haul freight : engineer's working and living environment, the resultant locomotive : cab design and design alternatives. The analysis is based on a : delineation of functional requirements found in current...

Environmental assessment of airport pavement design and construction alternatives : final report.

DOT National Transportation Integrated Search

2016-02-01

The objective of this study is to quantify energy and environmental sustainability of asphalt and concrete : runway pavements using Life-Cycle Assessment (LCA). The design alternatives include runway rehabilitation/reconstruction : designs considered...

Comparison of a fully mapped plot design to three alternative designs for volume and area estimates using Maine inventory data

Treesearch

Stanford L. Arner

1998-01-01

A fully mapped plot design is compared to three alternative designs using data collected for the recent inventory of Maine's forest resources. Like the fully mapped design, one alternative eliminates the bias of previous procedures, and should be less costly and more consistent. There was little difference in volume and area estimates or in sampling errors among...

77 FR 30047 - Petition for Alternative Locomotive Crashworthiness Design

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-21

... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration [Docket Number FRA-2012-0036..., the National Railroad Passenger Corporation (Amtrak) has petitioned the Federal Railroad Administration (FRA) for approval of alternative locomotive crashworthiness design for an electric locomotive...

Visual preference and ecological assessments for designed alternative brownfield rehabilitations.

PubMed

Lafortezza, Raffaele; Corry, Robert C; Sanesi, Giovanni; Brown, Robert D

2008-11-01

This paper describes an integrative method for quantifying, analyzing, and comparing the effects of alternative rehabilitation approaches with visual preference. The method was applied to a portion of a major industrial area located in southern Italy. Four alternative approaches to rehabilitation (alternative designs) were developed and analyzed. The scenarios consisted of the cleanup of the brownfields plus: (1) the addition of ground cover species; (2) the addition of ground cover species and a few trees randomly distributed; (3) the addition of ground cover species and a few trees in small groups; and (4) the addition of ground cover species and several trees in large groups. The approaches were analyzed and compared to the baseline condition through the use of cost-surface modeling (CSM) and visual preference assessment (VPA). Statistical results showed that alternatives that were more ecologically functional for forest bird species dispersal were also more visually preferable. Some differences were identified based on user groups and location of residence. The results of the study are used to identify implications for enhancing both ecological attributes and visual preferences of rehabilitating landscapes through planning and design.

48 CFR 52.204-8 - Annual Representations and Certifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... than DoD, NASA, and the Coast Guard. (B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard. (x) 52.219-2, Equal Low Bids. This provision applies to... of, EPA-designated items. (xvi) 52.225-2, Buy American Certificate. This provision applies to...

Optimizing Monitoring Designs under Alternative Objectives

DOE PAGES

Gastelum, Jason A.; USA, Richland Washington; Porter, Ellen A.; ...

2014-12-31

This paper describes an approach to identify monitoring designs that optimize detection of CO2 leakage from a carbon capture and sequestration (CCS) reservoir and compares the results generated under two alternative objective functions. The first objective function minimizes the expected time to first detection of CO2 leakage, the second more conservative objective function minimizes the maximum time to leakage detection across the set of realizations. The approach applies a simulated annealing algorithm that searches the solution space by iteratively mutating the incumbent monitoring design. The approach takes into account uncertainty by evaluating the performance of potential monitoring designs across amore » set of simulated leakage realizations. The approach relies on a flexible two-tiered signature to infer that CO2 leakage has occurred. This research is part of the National Risk Assessment Partnership, a U.S. Department of Energy (DOE) project tasked with conducting risk and uncertainty analysis in the areas of reservoir performance, natural leakage pathways, wellbore integrity, groundwater protection, monitoring, and systems level modeling.« less

PIXE analysis of Italian ink drawings of the XVI century

NASA Astrophysics Data System (ADS)

Zucchiatti, A.; Climent-Font, A.; Enguita, O.; Fernandez-Jimenez, M. T.; Finaldi, G.; Garrido, C.; Matillas, J. M.

2005-10-01

The composition of inks in a group of 24 drawings of ten XVI century Italian painters, has been determined by PIXE at the external micro-beam line of the Centro de Micro Análisis de Materiales of the Universidad Autónoma de Madrid. Ink elemental thicknesses have been determined by comparison with a set of certified thin standards. A comprehensive comparison of inks has also been performed by renormalisation of spectra and definition of an ink-to-ink distance. The elemental compositions and the ink-to-ink distances give consistent results that are generally in line with the appearance of the drawings and add relevant instrumental information to the stylistic observation, revealing for example the presence of retouches and additions in different parts of a drawing. Cluster analysis performed on a subgroup of 13 artefacts from the Genoese painter Luca Cambiaso and his school has revealed a partition that separates neatly the work of the master from that of his followers.

Preliminary design of a mini-Brayton Compressor-Alternator-Turbine (CAT)

NASA Technical Reports Server (NTRS)

1973-01-01

The preliminary design of a mini-Brayton compressor-alternator-turbine system is discussed. The program design goals are listed. The optimum system characteristics over the entire range of power output were determined by performing a wide-range parametric study. The ability to develop the required components to the degree necessary within the limitations of present technology is evaluated. The sensitivity of the system to various individual design parameters was analyzed.

48 CFR 52.204-8 - Annual Representations and Certifications.

Code of Federal Regulations, 2013 CFR

2013-10-01

... than DoD, NASA, and the Coast Guard. (B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard. (x) 52.219-2, Equal Low Bids. This provision applies to... of, EPA-designated items. (xvi) 52.225-2, Buy American Act Certificate. This provision applies to...

Digital-computer program for design analysis of salient, wound pole alternators

NASA Technical Reports Server (NTRS)

Repas, D. S.

1973-01-01

A digital computer program for analyzing the electromagnetic design of salient, wound pole alternators is presented. The program, which is written in FORTRAN 4, calculates the open-circuit saturation curve, the field-current requirements at rated voltage for various loads and losses, efficiency, reactances, time constants, and weights. The methods used to calculate some of these items are presented or appropriate references are cited. Instructions for using the program and typical program input and output for an alternator design are given, and an alphabetical list of most FORTRAN symbols and the complete program listing with flow charts are included.

An Alternative View of Some FIA Sample Design and Analysis Issues

Treesearch

Paul C. Van Deusen

2005-01-01

Sample design and analysis decisions are the result of compromises and inputs from many sources. The end result would likely change if different individuals or groups were involved in the planning process. Discussed here are some alternatives to the procedures that are currently being used for the annual inventory. The purpose is to indicate that alternatives exist and...

The Bayer Facts of Science Education XVI: "US STEM Workforce Shortage--Myth or Reality? Fortune 1000 Talent Recruiters on the Debate"

ERIC Educational Resources Information Center

Journal of Science Education and Technology, 2014

2014-01-01

A major debate is currently underway in the USA about whether there is, in fact, a science, technology, engineering and mathematics (STEM) workforce shortage in the country or not. This is the subject of the "Bayer Facts of Science Education XVI: US STEM Workforce Shortage--Myth or Reality? Fortune 1000 Talent Recruiters on the Debate."…

Alternative designs for space x-ray telescopes

NASA Astrophysics Data System (ADS)

Hudec, R.; Pína, L.; Maršíková, Veronika; Černá, Daniela; Inneman, A.; Tichý, V.

2017-11-01

The X-ray optics is a key element of space X-ray telescopes, as well as other X-ray imaging instruments. The grazing incidence X-ray lenses represent the important class of X-ray optics. Most of grazing incidence (reflective) X-ray imaging systems used in astronomy but also in other (laboratory) applications are based on the Wolter 1 (or modified) arrangement. But there are also other designs and configurations proposed, used and considered for future applications both in space and in laboratory. The Kirkpatrick-Baez (K-B) lenses as well as various types of Lobster-Eye optics and MCP/Micropore optics serve as an example. Analogously to Wolter lenses, the X-rays are mostly reflected twice in these systems to create focal images. Various future projects in X-ray astronomy and astrophysics will require large segments with multiple thin shells or foils. The large Kirkpatrick-Baez modules, as well as the large Lobster-Eye X-ray telescope modules in Schmidt arrangement may serve as examples. All related space projects will require high quality and light segmented shells (bent or flat foils) with high X-ray reflectivity and excellent mechanical stability. The Multi Foil Optics (MFO) approach represent a promising alternative for both LE and K-B X-ray optical modules. Several types of reflecting substrates may be considered for these applications, with emphasis on thin float glass sheets and, more recently, high quality silicon wafers. This confirms the importance of non-Wolter X-ray optics designs for the future. The alternative designs require novel reflective substrates which are also discussed in the paper.

Alternate Lattice Design for Advanced Photon Source Multi-Bend Achromat Upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Yipeng; Borland, Michael

2015-01-01

A 67-pm hybrid-seven-bend achromat (H7BA) lattice is proposed for a futureAdvanced Photon Source (APS)multibend- achromat (MBA) upgrade. This lattice requires use of a swap-out (on-axis) injection scheme. Alternate lattice design work has also been performed to achieve better beam dynamics performance than the nominal APS MBA lattice, in order to allow beam accumulation. One of such alternate H7BA lattice designs, which still targets a very low emittance of 76 pm, is discussed in this paper. With these lattices, existing APS injector complex can be employed without the requirement of a very high charge operation. Studies show that an emittance belowmore » 76 pm can be achieved with the employment of reverse bends in an alternate lattice. We discuss the predicted performance and requirements for these lattices and compare them to the nominal lattice.« less

48 CFR 52.204-8 - Annual Representations and Certifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... are issued by other than DoD, NASA, and the Coast Guard. (B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard. (x) 52.219-2, Equal Low Bids. This... solicitations that are for, or specify the use of, EPA-designated items. (xvi) 52.225-2, Buy American Act...

48 CFR 52.204-8 - Annual Representations and Certifications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... are issued by other than DoD, NASA, and the Coast Guard. (B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard. (x) 52.219-2, Equal Low Bids. This... solicitations that are for, or specify the use of, EPA-designated items. (xvi) 52.225-2, Buy American Act...

20 CFR 404.535 - How much will we withhold from your title VIII and title XVI benefits to recover a title II...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false How much will we withhold from your title... Officer § 404.535 How much will we withhold from your title VIII and title XVI benefits to recover a title II overpayment? (a) If past-due benefits are payable to you, we will withhold the lesser of the...

Alternating treatments design: one strategy for comparing the effects of two treatments in a single subject.

PubMed Central

Barlow, D H; Hayes, S C

1979-01-01

A little used and often confused design, capable of comparing two treatments within a single subject, has been termed, variously, a multielement baseline design, a multiple schedule design, and a randomization design. The background of these terms is reviewed, and a new, more descriptive term, Alternating Treatments Design, is proposed. Critical differences between this design and a Simultaneous Treatment Design are outlined, and experimental questions answerable by each design are noted. Potential problems with multiple treatment interference in this procedure are divided into sequential confounding, carryover effects, and alternation effects and the importance of these issues vis-a-vis other single-case experimental designs is considered. Methods of minimizing multiple treatment interference as well as methods of studying these effects are outlined. Finally, appropriate uses of Alternating Treatments Designs are described and discussed in the context of recent examples. PMID:489478

34. ALTERNATE DESIGN USING BATTERED AND UNSHEATHED LIFT TOWERS, WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

34. ALTERNATE DESIGN USING BATTERED AND UNSHEATHED LIFT TOWERS, WITH DEEPENED TRUSS ON LIFT SPAN. Pen-and-ink drawing by project architect Alfred Eichler, 1934. - Sacramento River Bridge, Spanning Sacramento River at California State Highway 275, Sacramento, Sacramento County, CA

A Study of Consistency in Design Selection and the Rank Ordering of Alternatives Using a Value Driven Design Approach

NASA Astrophysics Data System (ADS)

Subramanian, Tenkasi R.

In the current day, with the rapid advancement in technology, engineering design is growing in complexity. Nowadays, engineers have to deal with design problems that are large, complex and involving multi-level decision analyses. With the increase in complexity and size of systems, the production and development cost tend to overshoot the allocated budget and resources. This often results in project delays and project cancellation. This is particularly true for aerospace systems. Value Driven Design proves to be means to strengthen the design process and help counter such trends. Value Driven is a novel framework for optimization which puts stakeholder preferences at the forefront of the design process to capture their true preferences to present system alternatives that are consistent the stakeholder's expectations. Traditional systems engineering techniques promote communication of stakeholder preferences in the form of requirements which confines the design space by imposing additional constraints on it. This results in a design that does not capture the true preferences of the stakeholder. Value Driven Design provides an alternate approach to design wherein a value function is created that corresponds to the true preferences of the stakeholder. The applicability of VDD broad, but it is imperative to first explore its feasibility to ensure the development of an efficient, robust and elegant system design. The key to understanding the usability of VDD is to investigate the formation, propagation and use of a value function. This research investigates the use of rank correlation metrics to ensure consistent rank ordering of design alternatives, while investigating the fidelity of the value function. The impact of design uncertainties on rank ordering. A satellite design system consisting of a satellite, ground station and launch vehicle is used to demonstrate the use of the metrics to aid in decision support during the design process.

Expert System Approach For Generating And Evaluating Engine Design Alternatives

NASA Astrophysics Data System (ADS)

Shen, Stewart N. T.; Chew, Meng-Sang; Issa, Ghassan F.

1989-03-01

Artificial intelligence is becoming an increasingly important subject of study for computer scientists, engineering designers, as well as professionals in other fields. Even though AI technology is a relatively new discipline, many of its concepts have already found practical applications. Expert systems, in particular, have made significant contributions to technologies in such fields as business, medicine, engineering design, chemistry, and particle physics. This paper describes an expert system developed to aid the mechanical designer with the preliminary design of variable-stroke internal-combustion engines. The expert system accomplished its task by generating and evaluating a large number of design alternatives represented in the form of graphs. Through the application of structural and design rules directly to the graphs, optimal and near optimal preliminary design configurations of engines are deduced.

Lamb shift and fine structure of n = 2 in /sup 35/C1 XVI

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berry, H.G.; DeSerio, R.; Livingston, A.E.

We have measured the wavelengths of the 2s /sup 3/S/sub 1/-2p /sup 3/P/sub 2/ and 2s /sup 3/S/sub 1/ -- 2p /sup 3/P/sub 0/ transitions in C1 XVI to be 613.825 +- 0.013 A and 705.854 +- 0.076 A. Our precision is sufficient to provide measurements of the 2s/sub 1/2/-2p/sub 3/2/ Lamb shifts to an accuracy of +- 0.3% and to test quantum electrodynamics (QED) theory in the strong-field region. We compres our results with the one-electron QED theories of Mohr and Erickson and discuss the accuracy of calculations of electron correlation in two-electron atoms.

35. ALTERNATE DESIGN USING THROUGH ARCH SPANS, WITH ARCH REPEATED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. ALTERNATE DESIGN USING THROUGH ARCH SPANS, WITH ARCH REPEATED BETWEEN TOWER LEGS, AND ASHLAR MASONRY WALLS AND PYLONS Pen-and-ink drawing by project architect Alfred Eichler, 1934. - Sacramento River Bridge, Spanning Sacramento River at California State Highway 275, Sacramento, Sacramento County, CA

37. ALTERNATE DESIGN, SIMILAR TO THAT ULTIMATELY SELECTED, BUT USING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

37. ALTERNATE DESIGN, SIMILAR TO THAT ULTIMATELY SELECTED, BUT USING STEPPED TOWERS, AND WITH PYLONS CAPPED BY LANTERNS Pen-and-ink drawing by project architect Alfred Eichler, ca. 1934. - Sacramento River Bridge, Spanning Sacramento River at California State Highway 275, Sacramento, Sacramento County, CA

Alternative Instructional Design Paradigms: What's Worth Discussing and What Isn't.

ERIC Educational Resources Information Center

Willis, Jerry

1998-01-01

Examines the paradigm debate over established (behavioral and cognitive) and alternative (constructivist) models of instructional design (ID). Discusses instructional strategies and principles, new terms versus new meaning, "straw man" and personalized arguments, expert-determined goals, research-based versus "brand-X" models,…

Evaluation of HiPHES convective reformer design alternatives. Phase 2, Final issue

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-08-01

Phase I Stone & Webster presented three potential design configurations for a ceramic-tubed steam-methane reformer. These were the Tube-Within-a-Tube (TWIT) design, the Once-Through design, and the Monolith design. Although the TWIT design configuration appeared to be the most viable, the inclusion of a more detailed examination of design alternatives for the HiPHES reformer was deemed appropriate for the Phase II program. Of particular concern was the length of the ceramic tubes required for the TWIT design. To assist in this evaluation, Stone & Webster established a Development Team consisting of specialists in the areas of heat transfer, ceramic materials, exchangermore » design, vessel design, and potential users. Stone & Webster reviewed the critical areas of concern for a ceramic convective reformer, evaluated competing design configurations, and presented the results to the Development Team. This report presents Stone & Webster`s evaluations and the comments and recommendations of the Development Team. This effort comprised the majority of Task 1 of Phase II of Stone & Webster`s HiPHES project. The design review was executed in parallel with the material coupon screening tests at BP America. The goal of both tasks was to confirm the materials selection and reformer design configuration so that the conditions for the tube and joint tests to be conducted at Oak Ridge National Laboratory (ORNL) could be specified. The ORNL tests are intended to evaluate the reformer design configuration and materials of construction used for the reformer design in Phase II, and to be used in the demonstration unit in Phase III. The Task 1 (Evaluation of Alternative Reformer Designs) effort has identified a preferred design configuration for the proposed ceramic reformer. Additional engineering and material evaluation work is necessary before an operating prototype can be designed.« less

Predicting the effectiveness of road safety campaigns through alternative research designs.

PubMed

Adamos, Giannis; Nathanail, Eftihia

2016-12-01

A large number of road safety communication campaigns have been designed and implemented in the recent years; however their explicit impact on driving behavior and road accident rates has been estimated in a rather low proportion. Based on the findings of the evaluation of three road safety communication campaigns addressing the issues of drinking and driving, seat belt usage, and driving fatigue, this paper applies different types of research designs (i.e., experimental, quasi-experimental, and non-experimental designs), when estimating the effectiveness of road safety campaigns, implements a cross-design assessment, and conducts a cross-campaign evaluation. An integrated evaluation plan was developed, taking into account the structure of evaluation questions, the definition of measurable variables, the separation of the target audience into intervention (exposed to the campaign) and control (not exposed to the campaign) groups, the selection of alternative research designs, and the appropriate data collection methods and techniques. Evaluating the implementation of different research designs in estimating the effectiveness of road safety campaigns, results showed that the separate pre-post samples design demonstrated better predictability than other designs, especially in data obtained from the intervention group after the realization of the campaign. The more constructs that were added to the independent variables, the higher the values of the predictability were. The construct that most affects behavior is intention, whereas the rest of the constructs have a lower impact on behavior. This is particularly significant in the Health Belief Model (HBM). On the other hand, behavioral beliefs, normative beliefs, and descriptive norms, are significant parameters for predicting intention according to the Theory of Planned Behavior (TPB). The theoretical and applied implications of alternative research designs and their applicability in the evaluation of road safety

Evaluation of occupational health interventions using a randomized controlled trial: challenges and alternative research designs.

PubMed

Schelvis, Roosmarijn M C; Oude Hengel, Karen M; Burdorf, Alex; Blatter, Birgitte M; Strijk, Jorien E; van der Beek, Allard J

2015-09-01

Occupational health researchers regularly conduct evaluative intervention research for which a randomized controlled trial (RCT) may not be the most appropriate design (eg, effects of policy measures, organizational interventions on work schedules). This article demonstrates the appropriateness of alternative designs for the evaluation of occupational health interventions, which permit causal inferences, formulated along two study design approaches: experimental (stepped-wedge) and observational (propensity scores, instrumental variables, multiple baseline design, interrupted time series, difference-in-difference, and regression discontinuity). For each design, the unique characteristics are presented including the advantages and disadvantages compared to the RCT, illustrated by empirical examples in occupational health. This overview shows that several appropriate alternatives for the RCT design are feasible and available, which may provide sufficiently strong evidence to guide decisions on implementation of interventions in workplaces. Researchers are encouraged to continue exploring these designs and thus contribute to evidence-based occupational health.

Behavioral headache research: methodologic considerations and research design alternatives.

PubMed

Hursey, Karl G; Rains, Jeanetta C; Penzien, Donald B; Nash, Justin M; Nicholson, Robert A

2005-05-01

Behavioral headache treatments have garnered solid empirical support in recent years, but there is substantial opportunity to strengthen the next generation of studies with improved methods and consistency across studies. Recently, Guidelines for Trials of Behavioral Treatments for Recurrent Headache were published to facilitate the production of high-quality research. The present article compliments the guidelines with a discussion of methodologic and research design considerations. Since there is no research design that is applicable in every situation, selecting an appropriate research design is fundamental to producing meaningful results. Investigators in behavioral headache and other areas of research consider the developmental phase of the research, the principle objectives of the project, and the sources of error or alternative interpretations in selecting a design. Phases of clinical trials typically include pilot studies, efficacy studies, and effectiveness studies. These trials may be categorized as primarily pragmatic or explanatory. The most appropriate research designs for these different phases and different objectives vary on such characteristics as sample size and assignment to condition, types of control conditions, periods or frequency of measurement, and the dimensions along which comparisons are made. A research design also must fit within constraints on available resources. There are a large number of potential research designs that can be used and considering these characteristics allows selection of appropriate research designs.

Single-Case Research Design: An Alternative Strategy for Evidence-Based Practice

ERIC Educational Resources Information Center

Stapleton, Drue; Hawkins, Andrew

2015-01-01

Objective: The trend of utilizing evidence-based practice (EBP) in athletic training is now requiring clinicians, researchers, educators, and students to be equipped to both engage in and make judgments about research evidence. Single-case design (SCD) research may provide an alternative approach to develop such skills and inform clinical and…

Structural optimization of an alternate design for the Space Shuttle solid rocket booster field joint

NASA Technical Reports Server (NTRS)

Barthelemy, Jean-Francois M.; Rogers, James L., Jr.; Chang, Kwan J.

1987-01-01

A structural optimization procedure is used to determine the shape of an alternate design for the Shuttle's solid rocket booster field joint. In contrast to the tang and clevis design of the existing joint, this alternate design consists of two flanges bolted together. Configurations with 150 studs of 1 1/8 in diameter and 135 studs of 1 3/16 in diameter are considered. Using a nonlinear programming procedure, the joint weight is minimized under constraints on either von Mises or maximum normal stresses, joint opening and geometry. The procedure solves the design problem by replacing it by a sequence of approximate (convex) subproblems; the pattern of contact between the joint halves is determined every few cycles by a nonlinear displacement analysis. The minimum weight design has 135 studs of 1 3/16 in diameter and is designed under constraints on normal stresses. It weighs 1144 lb per joint more than the current tang and clevis design.

42 CFR 124.514 - Compliance alternative for facilities with small annual obligations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... HUMAN SERVICES HEALTH RESOURCES DEVELOPMENT MEDICAL FACILITY CONSTRUCTION AND MODERNIZATION Reasonable... recent year for which a published index is available. (ii) Title XVI-assisted facilities. (A) For the...

42 CFR 124.514 - Compliance alternative for facilities with small annual obligations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... HUMAN SERVICES HEALTH RESOURCES DEVELOPMENT MEDICAL FACILITY CONSTRUCTION AND MODERNIZATION Reasonable... recent year for which a published index is available. (ii) Title XVI-assisted facilities. (A) For the...

SU-E-J-50: An Evaluation of the Stability of Image Quality Parameters of the Elekta XVI and IView Imaging Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stanley, D; Papanikolaou, N; Gutierrez, A

2015-06-15

Introduction Quality assurance of the image quality for image guided localization systems is crucial to ensure accurate visualization and localization of target volumes. In this study, the long term stability of selected image parameters was assessed and evaluated for CBCT mode, planar radiographic kV mode and MV mode. Methods and Materials: The CATPHAN, QckV-1 and QC-3 phantoms were used to evaluate the image quality parameters. The planar radiographic images were analyzed in PIPSpro™ with spatial resolution (f30, f40, f50) being recorded. For XVI CBCT, Head and Neck Small20 (S20) and Pelvis Medium20 (M20) standard acquisition modes were evaluated for Uniformity,more » Noise, Spatial Resolution and HU constancy. Dose and kVp for the XVI were recorded using the Unfors RaySafe Xi system with the R/F Low Detector for the kV planar radiographic mode. Results A total of 20 and 10 measurements were acquired for the planar radiographic and CBCT systems respectively over a two month period. Values were normalized to the mean and the standard deviations (STD) were recorded. For the planar radiographic spatial resolution, the STD for f30, f40, f50 were 0.004, 0.002, 0.002 and 0.005, 0.007, 0.008 for the kV and MV, respectively. The average recorded dose for kV was 38.7±2.7 μGy. The STD of the evaluated metrics for the S20 acquisition were: 0.444(f30), 0.067(f40), 0.062(f50), 0.018(Water/poly-HU constancy), 0.028(uniformity) and 0.106(noise). The standard deviations for the M20 acquisition were: 0.108(f30), 0.073(f40), 0.091(f50), 0.008(Water/poly-HU constancy), 0.005(uniformity) and 0.005(noise). Using these, tolerances can be reported as a warning and action threshold of 1σ and 2σ. Conclusion A study was performed to assess the stability of the basic image quality parameters recommended by TG-142 for the Elekta XVI and iView imaging systems. Consistent imaging and dosimetric properties over the evaluated time frame were noted. This work was funded in part by the

Alternative Spring Break at the Savannah College of Art and Design: Engaging Art and Design Students in Community Service

ERIC Educational Resources Information Center

Hoey, J. Joseph; Feld-Gore, Jeffrey A.

2014-01-01

This chapter describes the impact of an alternative spring break program on students at the Savannah College of Art and Design over a set of years as well as its effectiveness as a service-learning tool.

Alternative communication network designs for an operational Plato 4 CAI system

NASA Technical Reports Server (NTRS)

Mobley, R. E., Jr.; Eastwood, L. F., Jr.

1975-01-01

The cost of alternative communications networks for the dissemination of PLATO IV computer-aided instruction (CAI) was studied. Four communication techniques are compared: leased telephone lines, satellite communication, UHF TV, and low-power microwave radio. For each network design, costs per student contact hour are computed. These costs are derived as functions of student population density, a parameter which can be calculated from census data for one potential market for CAI, the public primary and secondary schools. Calculating costs in this way allows one to determine which of the four communications alternatives can serve this market least expensively for any given area in the U.S. The analysis indicates that radio distribution techniques are cost optimum over a wide range of conditions.

XVI European Charcot Foundation Lecture: Nutrition and environment, can MS be prevented?

PubMed Central

Simon, Kelly Claire; Munger, Kassandra L; Ascherio, Alberto

2012-01-01

Multiple sclerosis is a relatively common debilitating neurologic disease that affects people in early adulthood. While the characteristic pathology of MS has been well described, the etiology of the disease is not well understood, despite decades of research and the identification of strong genetic and environmental candidates for susceptibility. A question central to all diseases, but posed specifically for MS at the XVI European Charcot Foundation Lecture, was ‘Can MS be prevented?’ To address this question, we have evaluated the available data regarding nutritional and environmental factors that may be related to MS susceptibility and suggest the extent to which a potential intervention may reduce disease burden. It is our opinion that intervention, particularly supplementation with vitamin D, could have a dramatic impact on disease prevalence. Understanding that any intervention or behavioral modification will surely act in the context of genetic susceptibility and unidentified stochastic events, it is likely that not all MS is ‘preventable’. Epidemiologic observation has provided key insights into environmental and nutritional factors that may alter one’s susceptibility to MS, however, there are still many questions in unraveling the etiology of this complex disease. PMID:21975017

Aerodynamic Design of Axial-flow Compressors. Volume III

NASA Technical Reports Server (NTRS)

Johnson, Irving A; Bullock, Robert O; Graham, Robert W; Costilow, Eleanor L; Huppert, Merle C; Benser, William A; Herzig, Howard Z; Hansen, Arthur G; Jackson, Robert J; Yohner, Peggy L;

Electron-density-sensitive Line Ratios of Fe XIII– XVI from Laboratory Sources Compared to CHIANTI

NASA Astrophysics Data System (ADS)

Weller, M. E.; Beiersdorfer, P.; Soukhanovskii, V. A.; Scotti, F.; LeBlanc, B. P.

2018-02-01

We present electron-density-sensitive line ratios for Fe XIII– XVI measured in the spectral wavelength range of 200–440 Å and an electron density range of (1–4) × 1013 cm‑3. The results provide a test at the high-density limit of density-sensitive line ratios useful for astrophysical studies. The measurements were performed on the National Spherical Torus Experiment-Upgrade, where electron densities were measured independently by the laser Thomson scattering diagnostic. Spectra were collected with a flat-field grazing-incidence spectrometer, which provided a spectral resolution of up to 0.3 Å, i.e., high resolution across the broad wavelength range. The response of the instrument was relatively calibrated using spectroscopic techniques in order to improve accuracy. The line ratios are compared to other laboratory sources and the latest version of CHIANTI (8.0.2), and an agreement within 30% is found.

Designing an Alternate Mission Operations Control Room

NASA Technical Reports Server (NTRS)

Montgomery, Patty; Reeves, A. Scott

2014-01-01

The Huntsville Operations Support Center (HOSC) is a multi-project facility that is responsible for 24x7 real-time International Space Station (ISS) payload operations management, integration, and control and has the capability to support small satellite projects and will provide real-time support for SLS launches. The HOSC is a service-oriented/ highly available operations center for ISS payloads-directly supporting science teams across the world responsible for the payloads. The HOSC is required to endure an annual 2-day power outage event for facility preventive maintenance and safety inspection of the core electro-mechanical systems. While complete system shut-downs are against the grain of a highly available sub-system, the entire facility must be powered down for a weekend for environmental and safety purposes. The consequence of this ground system outage is far reaching: any science performed on ISS during this outage weekend is lost. Engineering efforts were focused to maximize the ISS investment by engineering a suitable solution capable of continuing HOSC services while supporting safety requirements. The HOSC Power Outage Contingency (HPOC) System is a physically diversified compliment of systems capable of providing identified real-time services for the duration of a planned power outage condition from an alternate control room. HPOC was designed to maintain ISS payload operations for approximately three continuous days during planned HOSC power outages and support a local Payload Operations Team, International Partners, as well as remote users from the alternate control room located in another building.

Alternative Shear Panel Configurations for Light Wood Construction. Development, Seismic Performance, and Design Guidance

NASA Astrophysics Data System (ADS)

Wilcoski, James; Fischer, Chad; Allison, Tim; Malach, Kelly Jo

2002-04-01

Shear panels are used in light wood construction to resist lateral loads resulting from earthquakes or strong winds. These panels are typically made of wooden sheathing nailed to building frame members, but this standard panel design interferes with the installation of sheet insulation. A non-insulated shear panel conducts heat between the building interior and exterior wasting considerable amounts of energy. Several alternative shear panel designs were developed to avoid this insulation-mounting problem and sample panels were tested according to standard cyclic test protocols. One of the alternative designs consisted of diagonal steel straps nailed directly to the structural framing. Several others consisted of sheathing nailed to 2 x 4 framing then set into a larger 2 x 6 structural frame in such a way that no sheathing protruded beyond the edge of the 2 x 6 members. Also samples of industry-standard shear panels were constructed and tested in order to establish a performance baseline. Analytical models were developed to size test panels and predict panel behavior. A procedure was developed for establishing design capacities based on both test data and established baseline panel design capacity. The behavior of each panel configuration is documented and recommended design capacities are presented.

Lithography alternatives meet design style reality: How do they "line" up?

NASA Astrophysics Data System (ADS)

Smayling, Michael C.

2016-03-01

Optical lithography resolution scaling has stalled, giving innovative alternatives a window of opportunity. One important factor that impacts these lithographic approaches is the transition in design style from 2D to 1D for advanced CMOS logic. Just as the transition from 3D circuits to 2D fabrication 50 years ago created an opportunity for a new breed of electronics companies, the transition today presents exciting and challenging time for lithographers. Today, we are looking at a range of non-optical lithography processes. Those considered here can be broadly categorized: self-aligned lithography, self-assembled lithography, deposition lithography, nano-imprint lithography, pixelated e-beam lithography, shot-based e-beam lithography .Do any of these alternatives benefit from or take advantage of 1D layout? Yes, for example SAPD + CL (Self Aligned Pitch Division combined with Complementary Lithography). This is a widely adopted process for CMOS nodes at 22nm and below. Can there be additional design / process co-optimization? In spite of the simple-looking nature of 1D layout, the placement of "cut" in the lines and "holes" for interlayer connections can be tuned for a given process capability. Examples of such optimization have been presented at this conference, typically showing a reduction of at least one in the number of cut or hole patterns needed.[1,2] Can any of the alternatives complement each other or optical lithography? Yes.[3] For example, DSA (Directed Self Assembly) combines optical lithography with self-assembly. CEBL (Complementary e-Beam Lithography) combines optical lithography with SAPD for lines with shot-based e-beam lithography for cuts and holes. Does one (shrinking) size fit all? No, that's why we have many alternatives. For example NIL (Nano-imprint Lithography) has been introduced for NAND Flash patterning where the (trending lower) defectivity is acceptable for the product. Deposition lithography has been introduced in 3D NAND Flash to

Refuge alternatives relief valve testing and design with updated test stand.

PubMed

Lutz, T J; Bissert, P T; Homce, G T; Yonkey, J A

2018-03-01

Underground refuge alternatives require an air source to supply breathable air to the occupants. This requires pressure relief valves to prevent unsafe pressures from building up within the refuge alternative. The U.S. Mine Safety and Health Administration (MSHA) mandates that pressure relief valves prevent pressure from exceeding 1.25 kPa (0.18 psi), or as specified by the manufacturer, above mine atmospheric pressure when a fan or compressor is used for the air supply. The U.S. National Institute for Occupational Safety and Health (NIOSH) tested a variety of pressure relief valves using an instrumented test fixture consisting of data acquisition equipment, a centrifugal blower, ductwork and various sensors to determine if the subject pressure relief valves meet the MSHA requirement. Relief pressures and flow characteristics, including opening pressure and flow rate, were measured for five different pressure relief valves under a variety of conditions. The subject pressure relief valves included two off-the-shelf modified check valves, two check valves used in MSHA-approved built-in-place refuge alternatives, and a commercially available valve that was designed for a steel refuge alternative and is currently being used in some built-in-place refuge alternatives. The test results showed relief pressures ranging from 0.20 to 1.53 kPa (0.03 to 0.22 psi) and flow rates up to 19.3 m 3 /min (683 scfm). As tested, some of the pressure relief valves did not meet the 1.25 kPa (0.18 psi) relief specification.

Refuge alternatives relief valve testing and design with updated test stand

PubMed Central

Lutz, T.J.; Bissert, P.T.; Homce, G.T.; Yonkey, J.A.

2018-01-01

Underground refuge alternatives require an air source to supply breathable air to the occupants. This requires pressure relief valves to prevent unsafe pressures from building up within the refuge alternative. The U.S. Mine Safety and Health Administration (MSHA) mandates that pressure relief valves prevent pressure from exceeding 1.25 kPa (0.18 psi), or as specified by the manufacturer, above mine atmospheric pressure when a fan or compressor is used for the air supply. The U.S. National Institute for Occupational Safety and Health (NIOSH) tested a variety of pressure relief valves using an instrumented test fixture consisting of data acquisition equipment, a centrifugal blower, ductwork and various sensors to determine if the subject pressure relief valves meet the MSHA requirement. Relief pressures and flow characteristics, including opening pressure and flow rate, were measured for five different pressure relief valves under a variety of conditions. The subject pressure relief valves included two off-the-shelf modified check valves, two check valves used in MSHA-approved built-in-place refuge alternatives, and a commercially available valve that was designed for a steel refuge alternative and is currently being used in some built-in-place refuge alternatives. The test results showed relief pressures ranging from 0.20 to 1.53 kPa (0.03 to 0.22 psi) and flow rates up to 19.3 m3/min (683 scfm). As tested, some of the pressure relief valves did not meet the 1.25 kPa (0.18 psi) relief specification. PMID:29563650

Economic analysis of alternate uses and design. Crosbyton Solar Power project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jonish, J.E.; O'Hair, E.A.

This portion of the Crosbyton Solar Power Project (CSPP) has four objectives: (1) to provide a brief overview for the design, components and estimated energy performance of the baseline 60/sup 0/ rim solar bowl technology or FMDF; (2) to explain the basis for the cost estimates of the baseline 60/sup 0/ bowl and the alternate shallow bowl design, and to examine potential sensitivities in cost due to economies of scale and learning curve effects; (3) to provide life cycle cost simulations using the baseline and shallow bowl design and costs and annual performance estimates under a standardized set of modelmore » assumptions; and (4) to suggest potential applications of the CSPP concept in repowering, chemicals, fuel alcohol or malt beverages and integrated agriculture.« less

Electron-density-sensitive Line Ratios of Fe xiii– xvi from Laboratory Sources Compared to CHIANTI

DOE PAGES

Weller, M. E.; Beiersdorfer, P.; Soukhanovskii, V. A.; ...

2018-02-15

We present electron-density-sensitive line ratios for Fe xiii– xvi measured in the spectral wavelength range of 200–440 Å and an electron density range of (1-4) × 10 13 cm -3. The results provide a test at the high-density limit of density-sensitive line ratios useful for astrophysical studies. The measurements were performed on the National Spherical Torus Experiment-Upgrade, where electron densities were measured independently by the laser Thomson scattering diagnostic. Spectra were collected with a flat-field grazing-incidence spectrometer, which provided a spectral resolution of up to 0.3 Å, i.e., high resolution across the broad wavelength range. The response of the instrumentmore » was relatively calibrated using spectroscopic techniques in order to improve accuracy. Lastly, the line ratios are compared to other laboratory sources and the latest version of CHIANTI (8.0.2), and an agreement within 30% is found.« less

Electron-density-sensitive Line Ratios of Fe xiii– xvi from Laboratory Sources Compared to CHIANTI

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weller, M. E.; Beiersdorfer, P.; Soukhanovskii, V. A.

We present electron-density-sensitive line ratios for Fe xiii– xvi measured in the spectral wavelength range of 200–440 Å and an electron density range of (1-4) × 10 13 cm -3. The results provide a test at the high-density limit of density-sensitive line ratios useful for astrophysical studies. The measurements were performed on the National Spherical Torus Experiment-Upgrade, where electron densities were measured independently by the laser Thomson scattering diagnostic. Spectra were collected with a flat-field grazing-incidence spectrometer, which provided a spectral resolution of up to 0.3 Å, i.e., high resolution across the broad wavelength range. The response of the instrumentmore » was relatively calibrated using spectroscopic techniques in order to improve accuracy. Lastly, the line ratios are compared to other laboratory sources and the latest version of CHIANTI (8.0.2), and an agreement within 30% is found.« less

An Evaluation of Alternative Designs for a Grid Information Service

NASA Technical Reports Server (NTRS)

Smith, Warren; Waheed, Abdul; Meyers, David; Yan, Jerry; Kwak, Dochan (Technical Monitor)

2001-01-01

The Globus information service wasn't working well. There were many updates of data from Globus daemons which saturated the single server and users couldn't retrieve information. We created a second server for NASA and Alliance. Things were great on that server, but a bit slow on the other server. We needed to know exactly how the information service was being used. What were the best servers and configurations? This viewgraph presentation gives an overview of the evaluation of alternative designs for a Grid Information Service. Details are given on the workload characterization, methodology used, and the performance evaluation.

A demonstration of motion base design alternatives for the National Advanced Driving Simulator

NASA Technical Reports Server (NTRS)

Mccauley, Michael E.; Sharkey, Thomas J.; Sinacori, John B.; Laforce, Soren; Miller, James C.; Cook, Anthony

1992-01-01

A demonstration of the capability of NASA's Vertical Motion Simulator to simulate two alternative motion base designs for the National Advanced Driving simulator (NADS) is reported. The VMS is located at ARC. The motion base conditions used in this demonstration were as follows: (1) a large translational motion base; and (2) a motion base design with limited translational capability. The latter had translational capability representative of a typical synergistic motion platform. These alternatives were selected to test the prediction that large amplitude translational motion would result in a lower incidence or severity of simulator induced sickness (SIS) than would a limited translational motion base. A total of 10 drivers performed two tasks, slaloms and quick-stops, using each of the motion bases. Physiological, objective, and subjective measures were collected. No reliable differences in SIS between the motion base conditions was found in this demonstration. However, in light of the cost considerations and engineering challenges associated with implementing a large translation motion base, performance of a formal study is recommended.

Crossbar H-mode drift-tube linac design with alternative phase focusing for muon linac

NASA Astrophysics Data System (ADS)

Otani, M.; Futatsukawa, K.; Hasegawa, K.; Kitamura, R.; Kondo, Y.; Kurennoy, S.

2017-07-01

We have developed a Crossbar H-mode (CH) drift-tube linac (DTL) design with an alternative phase focusing (APF) scheme for a muon linac, in order to measure the anomalous magnetic moment and electric dipole moment (EDM) of muons at the Japan Proton Accelerator Research Complex (J-PARC). The CH-DTL accelerates muons from β = v/c = 0.08 to 0.28 at an operational frequency of 324 MHz. The design and results are described in this paper.

Alternative Ultrasound Gel for a Sustainable Ultrasound Program: Application of Human Centered Design.

PubMed

Salmon, Margaret; Salmon, Christian; Bissinger, Alexa; Muller, Mundenga Mutendi; Gebreyesus, Alegnta; Geremew, Haimanot; Wendel, Sarah K; Wendell, Sarah; Azaza, Aklilu; Salumu, Maurice; Benfield, Nerys

2015-01-01

This paper describes design of a low cost, ultrasound gel from local products applying aspects of Human Centered Design methodology. A multidisciplinary team worked with clinicians who use ultrasound where commercial gel is cost prohibitive and scarce. The team followed the format outlined in the Ideo Took Kit. Research began by defining the challenge "how to create locally available alternative ultrasound gel for a low-resourced environment? The "End-Users," were identified as clinicians who use ultrasound in Democratic Republic of the Congo and Ethiopia. An expert group was identified and queried for possible alternatives to commercial gel. Responses included shampoo, oils, water and cornstarch. Cornstarch, while a reasonable solution, was either not available or too expensive. We then sought deeper knowledge of locally sources materials from local experts, market vendors, to develop a similar product. Suggested solutions gleaned from these interviews were collected and used to create ultrasound gel accounting for cost, image quality, manufacturing capability. Initial prototypes used cassava root flour from Great Lakes Region (DRC, Rwanda, Uganda, Tanzania) and West Africa, and bula from Ethiopia. Prototypes were tested in the field and resulting images evaluated by our user group. A final prototype was then selected. Cassava and bula at a 32 part water, 8 part flour and 4 part salt, heated, mixed then cooled was the product design of choice.

Clean Air Program : Design Guidelines for Bus Transit Systems Using Alcohol Fuel (Methanol and Ethanol) as an Alternative Fuel

DOT National Transportation Integrated Search

1996-08-01

Although there are over one thousand transit buses in revenue service in the U.S. that are powered by alternative fuels, there are no comprehensive guidelines for the safe design and operation of alternative fuel facilities and vehicles for transit s...

Designing an Alternate Mission Operations Control Room

NASA Technical Reports Server (NTRS)

Montgomery, Patty; Reeves, A. Scott

2014-01-01

The Huntsville Operations Support Center (HOSC) is a multi-project facility that is responsible for 24x7 real-time International Space Station (ISS) payload operations management, integration, and control and has the capability to support small satellite projects and will provide real-time support for SLS launches. The HOSC is a serviceoriented/ highly available operations center for ISS payloads-directly supporting science teams across the world responsible for the payloads. The HOSC is required to endure an annual 2-day power outage event for facility preventive maintenance and safety inspection of the core electro-mechanical systems. While complete system shut-downs are against the grain of a highly available sub-system, the entire facility must be powered down for a weekend for environmental and safety purposes. The consequence of this ground system outage is far reaching: any science performed on ISS during this outage weekend is lost. Engineering efforts were focused to maximize the ISS investment by engineering a suitable solution capable of continuing HOSC services while supporting safety requirements. The HOSC Power Outage Contingency (HPOC) System is a physically diversified compliment of systems capable of providing identified real-time services for the duration of a planned power outage condition from an alternate control room. HPOC was designed to maintain ISS payload operations for approximately three continuous days during planned HOSC power outages and support a local Payload Operations Team, International Partners, as well as remote users from the alternate control room located in another building. This paper presents the HPOC architecture and lessons learned during testing and the planned maiden operational commissioning. Additionally, this paper documents the necessity of an HPOC capability given the unplanned HOSC Facility power outage on April 27th, 2011, as a result of the tornado outbreak that damaged the electrical grid to such a degree that

Preliminary Evaluation of Alternate Designs for HFIR Low-Enriched Uranium Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renfro, David G; Chandler, David; Cook, David Howard

2014-11-01

Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium (HEU) to low-enriched uranium (LEU) fuel are ongoing at Oak Ridge National Laboratory (ORNL) as part of an effort sponsored by the U.S. Department of Energy s Global Threat Reduction Initiative (GTRI)/Reduced Enrichment for Research and Test Reactors (RERTR) program. The fuel type selected by the program for the conversion of the five high-power research reactors in the U.S. that still use HEU fuel is a new U-Mo monolithic fuel. Studies by ORNL have previously indicated that HFIR can be successfully convertedmore » using the new fuel provided (1) the reactor power can be increased from 85 MW to 100 MW and (2) the fuel can be fabricated to a specific reference design. Fabrication techniques for the new fuel are under development by the program but are still immature, especially for the complex aspects of the HFIR fuel design. In FY 2012, the program underwent a major shift in focus to emphasize developing and qualifying processes for the fabrication of reliable and affordable LEU fuel. In support of this new focus and in an effort to ensure that the HFIR fuel design is as suitable for reliable fabrication as possible, ORNL undertook the present study to propose and evaluate several alternative design features. These features include (1) eliminating the fuel zone axial contouring in the previous reference design by substituting a permanent neutron absorber in the lower unfueled region of all of the fuel plates, (2) relocating the burnable neutron absorber from the fuel plates of the inner fuel element to the side plates of the inner fuel element (the fuel plates of the outer fuel element do not contain a burnable absorber), (3) relocating the fuel zone inside the fuel plate to be centered on the centerline of the depth of the plate, and (4) reshaping the radial contour of the relocated fuel zone to be symmetric about this centerline. The

Preliminary Evaluation of Alternate Designs for HFIR Low-Enriched Uranium Fuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renfro, David; Chandler, David; Cook, David

2014-10-30

Engineering design studies of the feasibility of conversion of the High Flux Isotope Reactor (HFIR) from high-enriched uranium (HEU) to low-enriched uranium (LEU) fuel are ongoing at Oak Ridge National Laboratory (ORNL) as part of an effort sponsored by the U.S. Department of Energy’s Global Threat Reduction Initiative (GTRI)/Reduced Enrichment for Research and Test Reactors (RERTR) program. The fuel type selected by the program for the conversion of the five high-power research reactors in the U.S. that still use HEU fuel is a new U-Mo monolithic fuel. Studies by ORNL have previously indicated that HFIR can be successfully converted usingmore » the new fuel provided (1) the reactor power can be increased from 85 MW to 100 MW and (2) the fuel can be fabricated to a specific reference design. Fabrication techniques for the new fuel are under development by the program but are still immature, especially for the “complex” aspects of the HFIR fuel design. In FY 2012, the program underwent a major shift in focus to emphasize developing and qualifying processes for the fabrication of reliable and affordable LEU fuel. In support of this new focus and in an effort to ensure that the HFIR fuel design is as suitable for reliable fabrication as possible, ORNL undertook the present study to propose and evaluate several alternative design features. These features include (1) eliminating the fuel zone axial contouring in the previous reference design by substituting a permanent neutron absorber in the lower unfueled region of all of the fuel plates, (2) relocating the burnable neutron absorber from the fuel plates of the inner fuel element to the side plates of the inner fuel element (the fuel plates of the outer fuel element do not contain a burnable absorber), (3) relocating the fuel zone inside the fuel plate to be centered on the centerline of the depth of the plate, and (4) reshaping the radial contour of the relocated fuel zone to be symmetric about this centerline

Critical appraisal of arguments for the delayed-start design proposed as alternative to the parallel-group randomized clinical trial design in the field of rare disease.

PubMed

Spineli, Loukia M; Jenz, Eva; Großhennig, Anika; Koch, Armin

2017-08-17

A number of papers have proposed or evaluated the delayed-start design as an alternative to the standard two-arm parallel group randomized clinical trial (RCT) design in the field of rare disease. However the discussion is felt to lack a sufficient degree of consideration devoted to the true virtues of the delayed start design and the implications either in terms of required sample-size, overall information, or interpretation of the estimate in the context of small populations. To evaluate whether there are real advantages of the delayed-start design particularly in terms of overall efficacy and sample size requirements as a proposed alternative to the standard parallel group RCT in the field of rare disease. We used a real-life example to compare the delayed-start design with the standard RCT in terms of sample size requirements. Then, based on three scenarios regarding the development of the treatment effect over time, the advantages, limitations and potential costs of the delayed-start design are discussed. We clarify that delayed-start design is not suitable for drugs that establish an immediate treatment effect, but for drugs with effects developing over time, instead. In addition, the sample size will always increase as an implication for a reduced time on placebo resulting in a decreased treatment effect. A number of papers have repeated well-known arguments to justify the delayed-start design as appropriate alternative to the standard parallel group RCT in the field of rare disease and do not discuss the specific needs of research methodology in this field. The main point is that a limited time on placebo will result in an underestimated treatment effect and, in consequence, in larger sample size requirements compared to those expected under a standard parallel-group design. This also impacts on benefit-risk assessment.

Exploration of alternate catalytic mechanisms and optimization strategies for retroaldolase design.

PubMed

Bjelic, Sinisa; Kipnis, Yakov; Wang, Ling; Pianowski, Zbigniew; Vorobiev, Sergey; Su, Min; Seetharaman, Jayaraman; Xiao, Rong; Kornhaber, Gregory; Hunt, John F; Tong, Liang; Hilvert, Donald; Baker, David

2014-01-09

Designed retroaldolases have utilized a nucleophilic lysine to promote carbon-carbon bond cleavage of β-hydroxy-ketones via a covalent Schiff base intermediate. Previous computational designs have incorporated a water molecule to facilitate formation and breakdown of the carbinolamine intermediate to give the Schiff base and to function as a general acid/base. Here we investigate an alternative active-site design in which the catalytic water molecule was replaced by the side chain of a glutamic acid. Five out of seven designs expressed solubly and exhibited catalytic efficiencies similar to previously designed retroaldolases for the conversion of 4-hydroxy-4-(6-methoxy-2-naphthyl)-2-butanone to 6-methoxy-2-naphthaldehyde and acetone. After one round of site-directed saturation mutagenesis, improved variants of the two best designs, RA114 and RA117, exhibited among the highest kcat (>10(-3)s(-1)) and kcat/KM (11-25M(-1)s(-1)) values observed for retroaldolase designs prior to comprehensive directed evolution. In both cases, the >10(5)-fold rate accelerations that were achieved are within 1-3 orders of magnitude of the rate enhancements reported for the best catalysts for related reactions, including catalytic antibodies (kcat/kuncat=10(6) to 10(8)) and an extensively evolved computational design (kcat/kuncat>10(7)). The catalytic sites, revealed by X-ray structures of optimized versions of the two active designs, are in close agreement with the design models except for the catalytic lysine in RA114. We further improved the variants by computational remodeling of the loops and yeast display selection for reactivity of the catalytic lysine with a diketone probe, obtaining an additional order of magnitude enhancement in activity with both approaches. © 2013.

Analytical design of a parasitic-loading digital speed controller for a 400-hertz turbine driven alternator

NASA Technical Reports Server (NTRS)

Ingle, B. D.; Ryan, J. P.

1972-01-01

A design for a solid-state parasitic speed controller using digital logic was analyzed. Parasitic speed controllers are used in space power electrical generating systems to control the speed of turbine-driven alternators within specified limits. The analysis included the performance characteristics of the speed controller and the generation of timing functions. The speed controller using digital logic applies step loads to the alternator. The step loads conduct for a full half wave starting at either zero or 180 electrical degrees.

Methods in Enzymology: “Flexible backbone sampling methods to model and design protein alternative conformations”

PubMed Central

Ollikainen, Noah; Smith, Colin A.; Fraser, James S.; Kortemme, Tanja

2013-01-01

Sampling alternative conformations is key to understanding how proteins work and engineering them for new functions. However, accurately characterizing and modeling protein conformational ensembles remains experimentally and computationally challenging. These challenges must be met before protein conformational heterogeneity can be exploited in protein engineering and design. Here, as a stepping stone, we describe methods to detect alternative conformations in proteins and strategies to model these near-native conformational changes based on backrub-type Monte Carlo moves in Rosetta. We illustrate how Rosetta simulations that apply backrub moves improve modeling of point mutant side chain conformations, native side chain conformational heterogeneity, functional conformational changes, tolerated sequence space, protein interaction specificity, and amino acid co-variation across protein-protein interfaces. We include relevant Rosetta command lines and RosettaScripts to encourage the application of these types of simulations to other systems. Our work highlights that critical scoring and sampling improvements will be necessary to approximate conformational landscapes. Challenges for the future development of these methods include modeling conformational changes that propagate away from designed mutation sites and modulating backbone flexibility to predictively design functionally important conformational heterogeneity. PMID:23422426

NASA Alternative Orion Small Cell Battery Design Support

NASA Technical Reports Server (NTRS)

Haynes, Chuck

2016-01-01

and analysis were completed and reviewed for endorsement by NASA Engineering and Safety Center team members. All Key Test Objectives were met and the small cell design alternative was demonstrated and selected to be a feasible drop in replacement for the MPCV Orion CM Battery for EM2 mission.

X-ray fluorescence analysis of yellow pigments in altarpieces by Valencian artists of the XV and XVI centuries

NASA Astrophysics Data System (ADS)

Ferrero, J. L.; Roldán, C.; Ardid, M.; Navarro, E.

1999-02-01

XRF analysis has allowed a quick and precise detection and identification of the inorganic elements that compose the yellow pigments in altarpieces of the XV and XVI centuries painted by the Valencian artists Miguel Alcañiz, Vicente Macip, Juan de Juanes, Hernando Yáñez de la Almedina and Hernando Llanos. The analyses have been carried out with an XRF portable system that consists of a tube of X-rays and detectors of Si(Li) and cadmium zinc telluride. This system has enabled a non-aggressive and non-destructive analysis of many pieces at the Museo de Bellas Artes of Valencia (Spain). Among the yellow pigments we have identified a pigment composed by lead and tin oxides named lead-tin yellow (Pb 2SnO 4), frequently used in European paintings from the XIV century until the first half of the XVIII century. This fact demonstrates the influence of elements and pictorial techniques from Europe to the region of Valencia.

Investigation of the accuracy of MV radiation isocentre calculations in the Elekta cone-beam CT software XVI.

PubMed

Riis, Hans L; Moltke, Lars N; Zimmermann, Sune J; Ebert, Martin A; Rowshanfarzad, Pejman

2016-06-07

Accurate determination of the megavoltage (MV) radiation isocentre of a linear accelerator (linac) is an important task in radiotherapy. The localization of the MV radiation isocentre is crucial for correct calibration of the in-room lasers and the cone-beam CT scanner used for patient positioning prior to treatment. Linac manufacturers offer tools for MV radiation isocentre localization. As a user, there is no access to the documentation for the underlying method and calculation algorithm used in the commercial software. The idea of this work was to evaluate the accuracy of the software tool for MV radiation isocentre calculation as delivered by Elekta using independent software. The image acquisition was based on the scheme designed by the manufacturer. Eight MV images were acquired in each series of a ball-bearing (BB) phantom attached to the treatment couch. The images were recorded at cardinal angles of the gantry using the electronic portal imaging device (EPID). Eight Elekta linacs with three different types of multileaf collimators (MLCs) were included in the test. The influence of MLC orientation, x-ray energy, and phantom modifications were examined. The acquired images were analysed using the Elekta x-ray volume imaging (XVI) software and in-house developed (IHD) MATLAB code. Results from the two different software were compared. A discrepancy in the longitudinal direction of the isocentre localization was found averaging 0.23 mm up to a maximum of 0.75 mm. The MLC orientation or the phantom asymmetry in the longitudinal direction do not appear to cause the discrepancy. The main cause of the differences could not be clearly identified. However, it is our opinion that the commercial software delivered by the linac manufacturer should be improved to reach better stability and precise results in the MV radiation isocentre calculations.

Treating Youths with Selective Mutism with an Alternating Design of Exposure-Based Practice and Contingency Management

ERIC Educational Resources Information Center

Vecchio, Jennifer; Kearney, Christopher A.

2009-01-01

Selective mutism is a severe childhood disorder involving failure to speak in public situations in which speaking is expected. The present study examined 9 youths with selective mutism treated with child-focused, exposure-based practices and parent-focused contingency management via an alternating treatments design. Broadband measures of…

Alternative pavement designs : Randolph park and ride.

DOT National Transportation Integrated Search

2013-05-01

Previous research on alternative pavement type bidding has proven that various treatments : are unique in terms of constructability, material characteristics, and associated performance. : While some treatments may have higher initial costs, it is im...

Tolerance of the archaeal Sac7d scaffold protein to alternative library designs: characterization of anti-immunoglobulin G Affitins.

PubMed

Béhar, Ghislaine; Bellinzoni, Marco; Maillasson, Mike; Paillard-Laurance, Lauranne; Alzari, Pedro M; He, Xuemei; Mouratou, Barbara; Pecorari, Frédéric

2013-04-01

Engineered protein scaffolds have received considerable attention as alternatives to antibodies in both basic and applied research, as they can offer superior biophysical properties often associated with a simpler molecular organization. Sac7d has been demonstrated as an effective scaffold for molecular recognition. Here, we used the initial L1 'flat surface' library constructed by randomization of 14 residues, to identify ligands specific for human immunoglobulin G. To challenge the plasticity of the Sac7d protein scaffold, we designed the alternative L2 'flat surface & loops' library whereof only 10 residues are randomized. Representative binders (Affitins) of the two libraries exhibited affinities in the low nanomolar range and were able to recognize different epitopes within human immunoglobulin G. These Affitins were stable up to pH 12 while largely conserving other favorable properties of Sac7d protein, such as high expression yields in Escherichia coli, solubility, thermal stability up to 80.7°C, and acidic stability (pH 0). In agreement with our library designs, mutagenesis study revealed two distinct binding areas, one including loops. Together, our results indicate that the Sac7d scaffold tolerates alternative library designs, which further expands the diversity of Affitins and may provide a general way to create tailored affinity tools for demanding applications.

Survey of alternative gas turbine engine and cycle design. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lukas, H.

1986-02-01

In the period of the 1940's to 1960's much experimentation was performed in the areas of intercooling, reheat, and recuperation, as well as the use of low-grade fuels in gas turbines. The Electric Power Research Institute (EPRI), in an effort to document past experience which can be used as the basis for current design activities, commissioned a study to document alternate cycles and components used in gas turbine design. The study was performed by obtaining the important technical and operational criteria of the cycles through a literature search of published documents, articles, and papers. Where possible the information was augmentedmore » through dialogue with persons associated with those cycles and with the manufacturers. The survey indicated that many different variations of the simple open-cycle gas turbine plant were used. Many of these changes resulted in increases in efficiency over the low simple-cycle efficiency of that period. Metallurgy, as well as compressor and turbine design, limited the simple-cycle efficiency to the upper teens. The cycle modifications increased those efficiencies to the twenties and thirties. Advances in metallurgy as well as compressor and turbine design, coupled with the decrease in flue cost, stopped the development of these complex cycles. Many of the plants operated successfully for many years, and only because newer simple-cycle gas turbine plants and large steam plants had better heat rates were these units shutdown or put into stand-by service. 24 refs., 25 figs., 114 tabs.« less

Evaluating the accuracy of the XVI dual registration tool compared with manual soft tissue matching to localise tumour volumes for post-prostatectomy patients receiving radiotherapy.

PubMed

Campbell, Amelia; Owen, Rebecca; Brown, Elizabeth; Pryor, David; Bernard, Anne; Lehman, Margot

2015-08-01

Cone beam computerised tomography (CBCT) enables soft tissue visualisation to optimise matching in the post-prostatectomy setting, but is associated with inter-observer variability. This study assessed the accuracy and consistency of automated soft tissue localisation using XVI's dual registration tool (DRT). Sixty CBCT images from ten post-prostatectomy patients were matched using: (i) the DRT and (ii) manual soft tissue registration by six radiation therapists (RTs). Shifts in the three Cartesian planes were recorded. The accuracy of the match was determined by comparing shifts to matches performed by two genitourinary radiation oncologists (ROs). A Bland-Altman method was used to assess the 95% levels of agreement (LoA). A clinical threshold of 3 mm was used to define equivalence between methods of matching. The 95% LoA between DRT-ROs in the superior/inferior, left/right and anterior/posterior directions were -2.21 to +3.18 mm, -0.77 to +0.84 mm, and -1.52 to +4.12 mm, respectively. The 95% LoA between RTs-ROs in the superior/inferior, left/right and anterior/posterior directions were -1.89 to +1.86 mm, -0.71 to +0.62 mm and -2.8 to +3.43 mm, respectively. Five DRT CBCT matches (8.33%) were outside the 3-mm threshold, all in the setting of bladder underfilling or rectal gas. The mean time for manual matching was 82 versus 65 s for DRT. XVI's DRT is comparable with RTs manually matching soft tissue on CBCT. The DRT can minimise RT inter-observer variability; however, involuntary bladder and rectal filling can influence the tools accuracy, highlighting the need for RT evaluation of the DRT match. © 2015 The Royal Australian and New Zealand College of Radiologists.

The impact of extreme weather conditions on the life of settlers in the Central Russia in X - XVI centuries

NASA Astrophysics Data System (ADS)

Graves, Irina; Nizovtsev, Viacheslav; Erman, Natalia

2017-04-01

resulted in crop damage and famine. From the XIV century the little Ice Age began. Year average temperature becomes lower by 1.4°C and summer temperature - by 2-3°C. In the XIV century the chronicles mentioned a total of 100 extreme natural phenomena, as a result of which Russia experienced more than 37 years of famine. The climate was particularly variable in late XIV - early XV century and XVI - XVII centuries, when there were years of particularly cold winters and increased humidity (due to winter precipitation). The duration of the crop growing season was reduced by three weeks. At the beginning of the XVII century spruce became dominant in the spruce-deciduous forests and co-dominant in deciduous forests. There was a transfer of settlements and agricultural land to interfluve areas and higher river valleys. The determining factors were demographic, socio-economic and historical factors, but the role of natural factors cannot be overlooked. The end of the XVI century was marked by the most severe political and economic crisis in the Russian State (oprichnina (political and administrative apparatus established by Ivan IV) and Livonian Wars by Ivan IV), which, combined with deteriorating environmental conditions (increased humidity of the climate, the average annual temperature drop) caused massive desolation of the lands. Many hundreds of villages turned into wasteland. In this period the Moscow land was reported as a "wild desert, covered with shrubs, bogs and imbanks", there were also memories of the past navigation on small rivers, data on mills on the streams. The climate deterioration caused the agrarian revolution in Russia in XIV-XVI centuries. Slash-and-burn and shifting cultivation was replaced by plow farming system (two- and three-field), which was more adapted to the harsh climatic conditions. The work is performed under project № 17-05-00662of the Russian Foundation for Basic Research

Implementing a method of screening one-well hydraulic barrier design alternatives.

PubMed

Rubin, Hillel; Shoemaker, Christine A; Köngeter, Jürgen

2009-01-01

This article provides details of applying the method developed by the authors (Rubin et al. 2008b) for screening one-well hydraulic barrier design alternatives. The present article with its supporting information (manual and electronic spreadsheets with a case history example) provides the reader complete details and examples of solving the set of nonlinear equations developed by Rubin et al. (2008b). It allows proper use of the analytical solutions and also depicting the various charts given by Rubin et al. (2008b). The final outputs of the calculations are the required position and the discharge of the pumping well. If the contaminant source is nonaqueous phase liquid (NAPL) entrapped within the aquifer, then the method provides an estimate of the aquifer remediation progress (which is a by-product) due to operating the hydraulic barrier.

Randomized controlled trials and neuro-oncology: should alternative designs be considered?

PubMed

Mansouri, Alireza; Shin, Samuel; Cooper, Benjamin; Srivastava, Archita; Bhandari, Mohit; Kondziolka, Douglas

2015-09-01

quality of design/reporting of RCTs in neuro-oncology persist. Quality improvement is necessary. Consideration of alternative strategies should be considered.

Performance of R-410A Alternative Refrigerants in a Reciprocating Compressor Designed for Air Conditioning Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shrestha, Som S; Vineyard, Edward Allan; Mumpower, Kevin

In response to environmental concerns raised by the use of refrigerants with high Global Warming Potential (GWP), the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) has launched an industry-wide cooperative research program, referred to as the Low-GWP Alternative Refrigerants Evaluation Program (AREP), to identify and evaluate promising alternative refrigerants for major product categories. After successfully completing the first phase of the program in December 2013, AHRI launched a second phase of the Low-GWP AREP in 2014 to continue research in areas that were not previously addressed, including refrigerants in high ambient conditions, refrigerants in applications not tested in the first phase,more » and new refrigerants identified since testing for the program began. Although the Ozone Depletion Potential of R-410A is zero, this refrigerant is under scrutiny due to its high GWP. Several candidate alternative refrigerants have already demonstrated low global warming potential. Performance of these low-GWP alternative refrigerants is being evaluated for Air conditioning and heat pump applications to ensure acceptable system capacity and efficiency. This paper reports the results of a series of compressor calorimeter tests conducted for the second phase of the AREP to evaluate the performance of R-410A alternative refrigerants in a reciprocating compressor designed for air conditioning systems. It compares performance of alternative refrigerants ARM-71A, L41-1, DR-5A, D2Y-60, and R-32 to that of R-410A over a wide range of operating conditions. The tests showed that, in general, cooling capacities were slightly lower (except for the R-32), but energy efficiency ratios (EER) of the alternative refrigerants were comparable to that of R-410A.« less

Using micro-simulation to investigate the safety impacts of transit design alternatives at signalized intersections.

PubMed

Li, Lu; Persaud, Bhagwant; Shalaby, Amer

2017-03-01

This study investigates the use of crash prediction models and micro-simulation to develop an effective surrogate safety assessment measure at the intersection level. With the use of these tools, hypothetical scenarios can be developed and explored to evaluate the safety impacts of design alternatives in a controlled environment, in which factors not directly associated with the design alternatives can be fixed. Micro-simulation models are developed, calibrated, and validated. Traffic conflicts in the micro-simulation models are estimated and linked with observed crash frequency, which greatly alleviates the lengthy time needed to collect sufficient crash data for evaluating alternatives, due to the rare and infrequent nature of crash events. A set of generalized linear models with negative binomial error structure is developed to correlate the simulated conflicts with the observed crash frequency in Toronto, Ontario, Canada. Crash prediction models are also developed for crashes of different impact types and for transit-involved crashes. The resulting statistical significance and the goodness-of-fit of the models suggest adequate predictive ability. Based on the established correlation between simulated conflicts and observed crashes, scenarios are developed in the micro-simulation models to investigate the safety effects of individual transit line elements by making hypothetical modifications to such elements and estimating changes in crash frequency from the resulting changes in conflicts. The findings imply that the existing transit signal priority schemes can have a negative effect on safety performance, and that the existing near-side stop positioning and streetcar transit type can be safer at their current state than if they were to be replaced by their respective counterparts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Reliability of Radioisotope Stirling Convertor Linear Alternator

NASA Technical Reports Server (NTRS)

Shah, Ashwin; Korovaichuk, Igor; Geng, Steven M.; Schreiber, Jeffrey G.

2006-01-01

Onboard radioisotope power systems being developed and planned for NASA s deep-space missions would require reliable design lifetimes of up to 14 years. Critical components and materials of Stirling convertors have been undergoing extensive testing and evaluation in support of a reliable performance for the specified life span. Of significant importance to the successful development of the Stirling convertor is the design of a lightweight and highly efficient linear alternator. Alternator performance could vary due to small deviations in the permanent magnet properties, operating temperature, and component geometries. Durability prediction and reliability of the alternator may be affected by these deviations from nominal design conditions. Therefore, it is important to evaluate the effect of these uncertainties in predicting the reliability of the linear alternator performance. This paper presents a study in which a reliability-based methodology is used to assess alternator performance. The response surface characterizing the induced open-circuit voltage performance is constructed using 3-D finite element magnetic analysis. Fast probability integration method is used to determine the probability of the desired performance and its sensitivity to the alternator design parameters.

A study of alternative designs for a system to concentrate carbon dioxide in a hydrogen-depolarized cell

NASA Technical Reports Server (NTRS)

1973-01-01

Experimental results are presented on alternative designs for a hydrogen depolarized cell to concentrate CO2 in spacecraft atmospheric control systems. Data cover technical problems, methods for solving these problems, and the suitability of such a cell for CO2 removal and control of atmospheric humidity during the flight mode.

Alternation as a form of allocation for quality improvement studies in primary healthcare settings: the on-off study design.

PubMed

Mathe, Nonsikelelo; Johnson, Steven T; Wozniak, Lisa A; Majumdar, Sumit R; Johnson, Jeffrey A

2015-08-25

Randomized controlled trials are considered the "gold standard" for scientific rigor in the assessment of benefits and harms of interventions in healthcare. They may not always be feasible, however, when evaluating quality improvement interventions in real-world healthcare settings. Non-randomized controlled trials (NCTs) are designed to answer questions of effectiveness of interventions in routine clinical practice to inform a decision or process. The on-off NCT design is a relatively new design where participant allocation is by alternation. In alternation, eligible patients are allocated to the intervention "on" or control "off " groups in time series dependent sequential clusters. We used two quality improvement studies undertaken in a Canadian primary care setting to illustrate the features of the on-off design. We also explored the perceptions and experiences of healthcare providers tasked with implementing the on-off study design. The on-off design successfully allocated patients to intervention and control groups. Imbalances between baseline variables were attributed to chance, with no detectable biases. However, healthcare providers' perspectives and experiences with the design in practice reveal some conflict. Specifically, providers described the process of allocating patients to the off group as unethical and immoral, feeling it was in direct conflict with their professional principle of providing care for all. The degree of dissatisfaction seemed exacerbated by: 1) the patient population involved (e.g., patient population viewed as high-risk (e.g., depressed or suicidal)), 2) conducting assessments without taking action (e.g., administering the PHQ-9 and not acting on the results), and 3) the (non-blinded) allocation process. Alternation, as in the on-off design, is a credible form of allocation. The conflict reported by healthcare providers in implementing the design, while not unique to the on-off design, may be alleviated by greater emphasis on

Alternatives for Jet Engine Control. Volume 1: Modelling and Control Design with Jet Engine Data

NASA Technical Reports Server (NTRS)

Sain, M. K.

1985-01-01

This document compiles a comprehensive list of publications supported by, or related to, National Aeronautics and Space Administration Grant NSG-3048, entitled "Alternatives for Jet Engine Control". Dr. Kurt Seldner was the original Technical Officer for the grant, at Lewis Research Center. Dr. Bruce Lehtinen was the final Technical Officer. At the University of Notre Dame, Drs. Michael K. Sain and R. Jeffrey Leake were the original Project Directors, with Dr. Sain becoming the final Project Director. Publications cover work over a ten-year period. The Final Report is divided into two parts. Volume i, "Modelling and Control Design with Jet Engine Data", follows in this report. Volume 2, "Modelling and Control Design with Tensors", has been bound separately.

Sodium Bearing Waste Processing Alternatives Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murphy, James Anthony; Palmer, Brent J; Perry, Keith Joseph

2003-12-01

A multidisciplinary team gathered to develop a BBWI recommendation to DOE-ID on the processing alternatives for the sodium bearing waste in the INTEC Tank Farm. Numerous alternatives were analyzed using a rigorous, systematic approach. The data gathered were evaluated through internal and external peer reviews for consistency and validity. Three alternatives were identified to be top performers: Risk-based Calcination, MACT to WIPP Calcination and Cesium Ion Exchange. A dual-path through early Conceptual design is recommended for MACT to WIPP Calcination and Cesium Ion Exchange since Risk-based Calcination does not require design. If calcination alternatives are not considered based on givingmore » Type of Processing criteria significantly greater weight, the CsIX/TRUEX alternative follows CsIX in ranking. However, since CsIX/TRUEX shares common uncertainties with CsIX, reasonable backups, which follow in ranking, are the TRUEX and UNEX alternatives. Key uncertainties must be evaluated by the decision-makers to choose one final alternative. Those key uncertainties and a path forward for the technology roadmapping of these alternatives is provided.« less

Alternatives for Jet Engine Control

NASA Technical Reports Server (NTRS)

Leake, R. J.; Sain, M. K.

1976-01-01

Approaches are developed as alternatives to current design methods which rely heavily on linear quadratic and Riccati equation methods. The main alternatives are discussed in two broad categories, local multivariable frequency domain methods and global nonlinear optimal methods.

Parametric Optimization of Some Critical Operating System Functions--An Alternative Approach to the Study of Operating Systems Design

ERIC Educational Resources Information Center

Sobh, Tarek M.; Tibrewal, Abhilasha

2006-01-01

Operating systems theory primarily concentrates on the optimal use of computing resources. This paper presents an alternative approach to teaching and studying operating systems design and concepts by way of parametrically optimizing critical operating system functions. Detailed examples of two critical operating systems functions using the…

Efficient dispersion tailoring by designing alternately arranged dispersion compensating fibers and fiber amplifiers to create self-similar parabolic pulses

NASA Astrophysics Data System (ADS)

Ghosh, Dipankar; Basu, Mousumi

2010-11-01

The parabolic similariton pulse formation by alternate arrangements of passive and active dispersion compensating fibers (DCFs) is presented here. These combinations of passive and active DCFs with constant core radii and constant nonlinearities are suggested as equivalent profiles of a dispersion tailored fiber amplifier in normal dispersion regime. The dispersion tailored fibers, usually known as dispersion decreasing fibers (DDFs) in normal dispersion regime, are capable of producing linearly chirped parabolic self-similar pulses. The DDF is designed and optimized with proper choice of fiber parameters so that considerable variation of nonlinearity can be achieved, which in turn enhances the effective gain coefficient of the fiber. Inclusion of this nonlinear variation along the DDF amplifier length leads to obtain the simulated output pulses with very small misfit parameters with respect to perfect parabolic pulse at sufficiently reduced optimum length. At the same time to avoid the fabrication difficulties of the DDF, the alternately arranged passive and active DCFs are suggested as suitable alternatives of the DDF. The performances of the cascaded systems for generation of self-similar parabolic pulses are compared with that of the DDF amplifier as well as combined systems consisting of DCFs with equal gain. The results show that the proposed alternately arranged cascaded system with less pumping requirements, are efficient enough to produce similar parabolic pulses as compared to the previously designed DDF, even when considerable amount of splice loss at each joint is included.

Dental stigmata and enamel thickness in a probable case of congenital syphilis from XVI century Croatia.

PubMed

Lauc, Tomislav; Fornai, Cinzia; Premužić, Zrinka; Vodanović, Marin; Weber, Gerhard W; Mašić, Boris; Rajić Šikanjić, Petra

2015-10-01

To analyse the dental remains of an individual with signs of congenital syphilis by using macroscopic observation, CBCT and micro-CT images, and the analysis of the enamel thickness. Anthropological analysis of human skeletal remains from the 16th century archaeological site Park Grič in Zagreb, Croatia discovered a female, 17-20 years old at the time of death, with dental signs supportive of congenital syphilis: mulberry molars and canine defects, as well as non-specific hypoplastic changes on incisors. The focus of the analysis was on three aspects: gross morphology, hypoplastic defects of the molars, canines and incisors, as well as enamel thickness of the upper first and second molars. The observed morphology of the first molars corresponds to the typical aspect of mulberry molars, while that of the canines is characterised by hypomineralisation. Hypoplastic grooves were observed on the incisal edges of all incisors. The enamel of the first molars is underdeveloped while in the second molars a thick-enamelled condition is observed. Our observations for the dental and skeletal evidence are supportive to a diagnosis of congenital syphilis for this specimen from XVI century Croatia. The use of CT imaging helped documenting the diagnostic features and quantifying the effect of the dental stigmata on first molars. Copyright © 2015 Elsevier Ltd. All rights reserved.

Rapid Prototyping: An Alternative Instructional Design Strategy.

ERIC Educational Resources Information Center

Tripp, Steven D.; Bichelmeyer, Barbara

1990-01-01

Discusses the nature of instructional design and describes rapid prototyping as a feasible model for instructional system design (ISD). The use of prototyping in software engineering is described, similarities between software design and instructional design are discussed, and an example is given which uses rapid prototyping in designing a…

Turbo-alternator-compressor design for supercritical high density working fluids

DOEpatents

Wright, Steven A.; Fuller, Robert L.

2013-03-19

Techniques for generating power are provided. Such techniques involve a thermodynamic system including a housing, a turbine positioned in a turbine cavity of the housing, a compressor positioned in a compressor cavity of the housing, and an alternator positioned in a rotor cavity between the turbine and compressor cavities. The compressor has a high-pressure face facing an inlet of the compressor cavity and a low-pressure face on an opposite side thereof. The alternator has a rotor shaft operatively connected to the turbine and compressor, and is supported in the housing by bearings. Ridges extending from the low-pressure face of the compressor may be provided for balancing thrust across the compressor. Seals may be positioned about the alternator for selectively leaking fluid into the rotor cavity to reduce the temperature therein.

Global Energy Issues and Alternate Fueling

NASA Technical Reports Server (NTRS)

Hendricks, Robert C.

2007-01-01

This viewgraph presentation describes world energy issues and alternate fueling effects on aircraft design. The contents include: 1) US Uses about 100 Quad/year (1 Q = 10(exp 15) Btu) World Energy Use: about 433 Q/yr; 2) US Renewable Energy about 6%; 3) Nuclear Could Grow: Has Legacy Problems; 4) Energy Sources Primarily NonRenewable Hydrocarbon; 5) Notes; 6) Alternate Fuels Effect Aircraft Design; 7) Conventional-Biomass Issue - Food or Fuel; 8) Alternate fuels must be environmentally benign; 9) World Carbon (CO2) Emissions Problem; 10) Jim Hansen s Global Warming Warnings; 11) Gas Hydrates (Clathrates), Solar & Biomass Locations; 12) Global Energy Sector Response; 13) Alternative Renewables; 14) Stratospheric Sulfur Injection Global Cooling Switch; 15) Potential Global Energy Sector Response; and 16) New Sealing and Fluid Flow Challenges.

45 CFR 1302.32 - Alternative agency-prohibition.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Alternative agency-prohibition. 1302.32 Section 1302.32 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT... Alternative agency—prohibition. (a) No agency will be designated as the alternative agency pursuant to this...

Thermal Alternating Polymer Nanocomposite (TAPNC) Coating Designed to Prevent Aerodynamic Insect Fouling

PubMed Central

Bayer, Ilker S.; Krishnan, K. Ghokulla; Robison, Robert; Loth, Eric; Berry, Douglas H.; Farrell, Thomas E.; Crouch, Jeffrey D.

2016-01-01

Insect residue adhesion to moving surfaces such as turbine blades and aircraft not only causes surface contamination problems but also increases drag on these surfaces. Insect fouling during takeoff, climb and landing can result in increased drag and fuel consumption for aircraft with laminar-flow surfaces. Hence, certain topographical and chemical features of non-wettable surfaces need to be designed properly for preventing insect residue accumulation on surfaces. In this work, we developed a superhydrophobic coating that is able to maintain negligible levels of insect residue after 100 high speed (50 m/s) insect impact events produced in a wind tunnel. The coating comprises alternating layers of a hydrophobic, perfluorinated acrylic copolymer and hydrophobic surface functional silicon dioxide nanoparticles that are infused into one another by successive thermal treatments. The design of this coating was achieved as a result of various experiments conducted in the wind tunnel by using a series of superhydrophobic surfaces made by the combination of the same polymer and nanoparticles in the form of nanocomposites with varying surface texture and self-cleaning hydrophobicity properties. Moreover, the coating demonstrated acceptable levels of wear abrasion and substrate adhesion resistance against pencil hardness, dry/wet scribed tape peel adhesion and 17.5 kPa Taber linear abraser tests. PMID:27924913

Thermal Alternating Polymer Nanocomposite (TAPNC) Coating Designed to Prevent Aerodynamic Insect Fouling.

PubMed

Bayer, Ilker S; Krishnan, K Ghokulla; Robison, Robert; Loth, Eric; Berry, Douglas H; Farrell, Thomas E; Crouch, Jeffrey D

2016-12-07

Insect residue adhesion to moving surfaces such as turbine blades and aircraft not only causes surface contamination problems but also increases drag on these surfaces. Insect fouling during takeoff, climb and landing can result in increased drag and fuel consumption for aircraft with laminar-flow surfaces. Hence, certain topographical and chemical features of non-wettable surfaces need to be designed properly for preventing insect residue accumulation on surfaces. In this work, we developed a superhydrophobic coating that is able to maintain negligible levels of insect residue after 100 high speed (50 m/s) insect impact events produced in a wind tunnel. The coating comprises alternating layers of a hydrophobic, perfluorinated acrylic copolymer and hydrophobic surface functional silicon dioxide nanoparticles that are infused into one another by successive thermal treatments. The design of this coating was achieved as a result of various experiments conducted in the wind tunnel by using a series of superhydrophobic surfaces made by the combination of the same polymer and nanoparticles in the form of nanocomposites with varying surface texture and self-cleaning hydrophobicity properties. Moreover, the coating demonstrated acceptable levels of wear abrasion and substrate adhesion resistance against pencil hardness, dry/wet scribed tape peel adhesion and 17.5 kPa Taber linear abraser tests.

Thermal Alternating Polymer Nanocomposite (TAPNC) Coating Designed to Prevent Aerodynamic Insect Fouling

NASA Astrophysics Data System (ADS)

Bayer, Ilker S.; Krishnan, K. Ghokulla; Robison, Robert; Loth, Eric; Berry, Douglas H.; Farrell, Thomas E.; Crouch, Jeffrey D.

2016-12-01

Insect residue adhesion to moving surfaces such as turbine blades and aircraft not only causes surface contamination problems but also increases drag on these surfaces. Insect fouling during takeoff, climb and landing can result in increased drag and fuel consumption for aircraft with laminar-flow surfaces. Hence, certain topographical and chemical features of non-wettable surfaces need to be designed properly for preventing insect residue accumulation on surfaces. In this work, we developed a superhydrophobic coating that is able to maintain negligible levels of insect residue after 100 high speed (50 m/s) insect impact events produced in a wind tunnel. The coating comprises alternating layers of a hydrophobic, perfluorinated acrylic copolymer and hydrophobic surface functional silicon dioxide nanoparticles that are infused into one another by successive thermal treatments. The design of this coating was achieved as a result of various experiments conducted in the wind tunnel by using a series of superhydrophobic surfaces made by the combination of the same polymer and nanoparticles in the form of nanocomposites with varying surface texture and self-cleaning hydrophobicity properties. Moreover, the coating demonstrated acceptable levels of wear abrasion and substrate adhesion resistance against pencil hardness, dry/wet scribed tape peel adhesion and 17.5 kPa Taber linear abraser tests.

Alternative fuels and vehicles choice model

DOT National Transportation Integrated Search

1994-10-01

This report describes the theory and implementation of a model of alternative fuel and vehicle choice (AFVC), designed for use with the United States Department of Energy's Alternative Fuels Trade Model (AFTM). The AFTM is a static equilibrium model ...

Thermoelectric converters for alternating current standards

NASA Astrophysics Data System (ADS)

Anatychuk, L. I.; Taschuk, D. D.

2012-06-01

Thermoelectric converters of alternating current remain priority instruments when creating standard equipment. This work presents the results of design and manufacture of alternating current converter for a military standard of alternating current in Ukraine. Results of simulation of temperature distribution in converter elements, ways of optimization to improve the accuracy of alternating current signal reproduction are presented. Results of metrological trials are given. The quality of thermoelectric material specially created for alternating current metrology is verified. The converter was used in alternating current standard for the frequency range from 10 Hz to 30 MHz. The efficiency of using thermoelectric signal converters in measuring instruments is confirmed.

Crop changes from the XVI century to the present in a hill/mountain area of eastern Liguria (Italy)

PubMed Central

Gentili, Rodolfo; Gentili, Elio; Sgorbati, Sergio

2009-01-01

Background Chronological information on the composition and structure of agrocenoses and detailed features of land cover referring to specific areas are uncommon in ethnobotanical studies, especially for periods before the XIX century. The aim of this study was to analyse the type of crop or the characteristics of soil cover from the XVI century to the present. Methods This diachronic analysis was accomplished through archival research on the inventories of the Parish of St. Mary and those of the Municipality of Pignone and from recent surveys conducted in an area of eastern Liguria (Italy). Results Archival data revealed that in study area the primary means of subsistence during the last five centuries, until the first half of the XX century, was chestnuts. In the XVIII and XIX centuries, crop diversification strongly increased in comparison with previous and subsequent periods. In more recent times, the abandonment of agricultural practices has favoured the re-colonisation of mixed woodland or cluster-pine woodland. Conclusion Ancient documents in the ecclesiastic or municipal inventories can be a very useful tool for enhancing the knowledge of agricultural practice, as well as of subsistence methods favoured by local populations during a particular time and for reconstructing land use change over time. PMID:19361339

Building Low Carbon Cities: Framework to Design and Evaluate Alternative Technologies and Policies for Land Use Planning

NASA Astrophysics Data System (ADS)

Hashimoto, S.; Hamano, H.; Fujita, T.; Hori, H.

2008-12-01

Annex I parties of the Kyoto Protocol are facing even greater pressures to fulfill their commitment for GHG reduction as they enter the first commitment period of the Kyoto Protocol 2008-2012. In Japanese context, one such challenge is to reduce CO2 emissions from the household and business sectors because CO2 emissions from the both sectors has increased by 12% and 20% respectively since 1990 while the industry has achieved 21% of CO2 emissions reduction. Land use planning, which, either directly or indirectly, controls appropriate uses for land within jurisdictions, might play very important roles to deal with CO2 reductions from the household and business sectors. In this research, aiming at effective reductions of air- conditioning energy consumption and resultant CO2 emissions from the household and business sectors, the framework to design and evaluate land use planning was developed. The design and evaluation processes embraced in this framework consist of GIS database, technology and policy inventory for planning, one- dimensional urban canopy model which evaluate urban climate at neighborhood level and air-conditioning load calculation procedure. The GIS database provides spatial information of target areas such as land use, building use and road networks, which, then, helps design alternative land use plans. The technology and policy inventory includes various planning options ranging from those for land over control to those for building energy control, which, combined with the GIS database, serves for planning process. The urban canopy model derives vertical profiles of local climate, such as temperature and humidity, using the information of land use, building height and so on, aided by the GIS database. Vertical profiles of the urban climate are then utilized to derive air-conditioning load and associated CO2 emissions for each building located in target areas. The framework developed was applied to the coastal district of Kawasaki, Japan, with an

Measurement And Modeling Of Fe VIII To Fe XVI M-shell Emission In The Extreme Ultraviolet

NASA Astrophysics Data System (ADS)

Beiersdorfer, Peter; Lepson, J. K.; Hurwitz, M.

2007-05-01

The solar EUV emission near 200 Å is presently being studied with high resolution with the Cosmic Hot Interstellar Plasma Spectrometer (CHIPS), which focuses on the emission between 90 and 270 Å, and with the EUV Imaging Spectrometer on Hinode, which focuses on the region 180 to 204 Å and 250 to 290 Å. The Solar EUV Experiment on the TIMED spacecraft also observes this spectral band but with greatly reduced resolution. The spectrum in this region is dominated by emission from moderate charge states of iron. The interpretation of the data relies on accurate and complete plasma emission models, notably CHIANTI. We have performed a series of laboratory measurements of the 3-3 emission from M-shell iron ions. The measurements cover the range 170 - 250 Å and are made at an electron density of about 1011 cm-3. Emission from Fe VIII through Fe XVI has been identified. Excellent agreement with CHIANTI predictions is found. A few weak transitions are noted in the laboratory data that are predicted by CHIANTI to be vanishingly small and should not have been observed. These are tentatively attributed to transitions in Fe XV. A comparison with observations from CHIPS is also presented. This work was supported in part by NASA's Solar and Heliospheric Physics Supporting Research and Technology Program. Work at UC-LLNL was performed under the auspices of the DOE by under Contract W-7405-Eng-48.

An alternative experimental case-control design for genetic association studies on bovine mastitis.

PubMed

Biffani, S; Del Corvo, M; Capoferri, R; Pedretti, A; Luini, M; Williams, J L; Pagnacco, G; Minvielle, F; Minozzi, G

2017-04-01

The possibility of using genetic control strategies to increase disease resistance to infectious diseases relies on the identification of markers to include in the breeding plans. Possible incomplete exposure of mastitis-free (control) animals, however, is a major issue to find relevant markers in genetic association studies for infectious diseases. Usually, designs based on elite dairy sires are used in association studies, but an epidemiological case-control strategy, based on cows repeatedly field-tested could be an alternative for disease traits. To test this hypothesis, genetic association results obtained in the present work from a cohort of Italian Holstein cows tested for mastitis over time were compared with those from a previous genome-wide scan on Italian Holstein sires genotyped with 50k single nucleotide polymorphisms for de-regressed estimated breeding values for somatic cell counts (SCCs) on Bos taurus autosome (BTA6) and BTA14. A total of 1121 cows were selected for the case-control approach (cases=550, controls=571), on a combination of herd level of SCC incidence and of within herd individual level of SCC. The association study was conducted on nine previously identified markers, six on BTA6 and four on BTA14, using the R statistical environment with the 'qtscore' function of the GenABEL package, on high/low adjusted linear score as a binomial trait. The results obtained in the cow cohort selected on epidemiological information were in agreement with those obtained from the previous sire genome-wide association study (GWAS). Six out of the nine markers showed significant association, four on BTA14 (rs109146371, rs109234250, rs109421300, rs109162116) and two on BTA6 (rs110527224 and rs42766480). Most importantly, using mastitis as a case study, the current work further validated the alternative use of historical field disease data in case-control designs for genetic analysis of infectious diseases in livestock.

Alternative Schools. Research Report 1976-3.

ERIC Educational Resources Information Center

National School Boards Association, Washington, DC.

During the 1970's, school districts throughout the country have created alternative educational programs allowing students and parents to choose the appropriate educational structure and methodology that suit their individual needs. School boards who establish alternative schools must assess, plan, design, effect, and evaluate educational programs…

Greenhouse gas emissions of alternative pavement designs: framework development and illustrative application.

PubMed

Liu, Xiaoyu; Cui, Qingbin; Schwartz, Charles

2014-01-01

Pavement rehabilitation is carbon intensive and the choice of pavement type is a critical factor in controlling greenhouse gas (GHG) emissions. The existing body of knowledge is not able to support decision-making on pavement choice due to a lack of consensus on the system boundaries, the functional units and the estimation periods. Excessive data requirements further inhibit the generalization of the existing methodologies for design evaluation at the early planning stage. This study proposes a practical life-cycle GHG estimation approach, which is arguably effective to benchmark pavement emissions given project bid tabulation. A set of case studies conducted for this study suggest that recycled asphalt pavement (e.g., foam stabilized base (FSB), and warm mix asphalt (WMA)) would prevent up to 50% of GHGs from the initial construction phase. However, from a life-cycle perspective, pavement emissions are dictated largely by the traffic characteristics and the analysis period for the use phase. The benefits from using recycled materials (e.g., FSB) are likely to diminish if the recycled products do not perform as well as those properly proportioned with less recycled materials, or if the recycled materials are locally unavailable. When the AADT reaches 10,000, use phase releases more than 97% of the life cycle emissions and the emissions difference among alternative designs will be within 1%. Copyright © 2013 Elsevier Ltd. All rights reserved.

Analysis of Pulsed Flow Modification Alternatives, Lower Missouri River, 2005

USGS Publications Warehouse

Jacobson, Robert B.

2008-01-01

The graphical, tabular, and statistical data presented in this report resulted from analysis of alternative flow regime designs considered by a group of Missouri River managers, stakeholders, and scientists during the summer of 2005. This plenary group was charged with designing a flow regime with increased spring flow pulses to support reproduction and survival of the endangered pallid sturgeon. Environmental flow components extracted from the reference natural flow regime were used to design and assess performance of alternative flow regimes. The analysis is based on modeled flow releases from Gavins Point Dam (near Yankton, South Dakota) for nine design alternatives and two reference scenarios; the reference scenarios are the run-of-the-river and the water-control plan implemented in 2004. The alternative designs were developed by the plenary group with the goal of providing pulsed spring flows, while retaining traditional social and economic uses of the river.

Cost-benefit analysis of alternative fuels and motive designs.

DOT National Transportation Integrated Search

2013-04-01

This project was funded by the Federal Railroad Administration to better understand the potential cost and benefits of using alternative fuels for U.S. freight and passenger locomotive operations. The framework for a decision model was developed by T...

Alternative Fuels Data Center

Science.gov Websites

strategic locations along major highways to improve the mobility of alternative fuel vehicles. To designate providers and purchasers, and reestablishing the goal of achieving strategic deployment of fueling

Sun/earth: alternative energy design for architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crowther, R.L.

1983-01-01

A survey of architecture and its relation to the natural environment is presented. A holistic design approach is presented for use in design and construction that reduces inflation, creates a more healthful and vitalizing environment, deploys capital more effectively, increases savings in residential and commercial architecture and construction, and increases cash flow by reducing money spent on utilities. Holistic design also creates a cohesive urban texture.

Preliminary design study of an alternate heat source assembly for a Brayton isotope power system

NASA Technical Reports Server (NTRS)

Strumpf, H. J.

1978-01-01

Results are presented for a study of the preliminary design of an alternate heat source assembly (HSA) intended for use in the Brayton isotope power system (BIPS). The BIPS converts thermal energy emitted by a radioactive heat source into electrical energy by means of a closed Brayton cycle. A heat source heat exchanger configuration was selected and optimized. The design consists of a 10 turn helically wound Hastelloy X tube. Thermal analyses were performed for various operating conditions to ensure that post impact containment shell (PICS) temperatures remain within specified limits. These limits are essentially satisfied for all modes of operation except for the emergency cooling system for which the PICS temperatures are too high. Neon was found to be the best choice for a fill gas for auxiliary cooling system operation. Low cycle fatigue life, natural frequency, and dynamic loading requirements can be met with minor modifications to the existing HSA.

Using Alternate Reality Games to Support First Year Induction with ELGG

ERIC Educational Resources Information Center

Piatt, Katie

2009-01-01

Purpose: This paper aims to describe a pilot project investigating the use of alternate reality game/treasure-hunt formats to provide an alternative to existing mechanisms for introducing new students to university information and services. Design/methodology/approach: An alternate reality game was designed to be played online and offline, which…

LIFE CYCLE ASSESSMENT OF ELECTRICITY GENERATION ALTERNATIVES

EPA Science Inventory

This presentation summarizes various electricity and electricity/steam cogeneration alternatives. Among these alternatives, are fossil fuel and biomass power generation plants. These plants have different designs due to the need in fossil fuel (coal) plants to include process u...

Study of free-piston Stirling engine driven linear alternators

NASA Technical Reports Server (NTRS)

Nasar, S. A.; Chen, C.

1987-01-01

The analysis, design and operation of single phase, single slot tubular permanent magnet linear alternator is presented. Included is the no-load and on-load magnetic field investigation, permanent magnet's leakage field analysis, parameter identification, design guidelines and an optimal design of a permanent magnet linear alternator. For analysis of the magnetic field, a simplified magnetic circuit is utilized. The analysis accounts for saturation, leakage and armature reaction.

ALTERNATIVE FUTURES ANALYSIS: A FRAMEWORK FOR COMMUNITY DECISION-MAKING

EPA Science Inventory

Alternative futures analysis is an assessment approach designed to inform community decisions about land and water use. We conducted an alternative futures analysis in Oregon's Willamette River Basin. Three alternative future landscapes for the year 2050 were depicted and compare...

Designing and Implementing Effective In-School Alternatives to Suspension.

ERIC Educational Resources Information Center

Mizell, M. Hayes

Because of widespread disillusion with suspension as a discipline procedure, school officials are developing inschool alternative programs. Institution of such a program must begin with reflection about how current disciplinary programs are succeeding or failing. The primary purposes of the program must include helping the child and identifying…

From the Tightrope: Designing, Developing, and Delivering an Alternative Teacher Education Model

ERIC Educational Resources Information Center

Yancey, Patty

2006-01-01

In the fall of 2003 a number of factors came together to create a fertile environment for developing an alternative, pre-service teacher education model. The overarching goal of the model is to diversify a rural university's credential program(s) by developing and offering alternative paths toward teacher certification within the constraints of a…

EXPERIMENT - APOLLO XVI (UV)

NASA Image and Video Library

1972-06-06

S72-40818 (21 April 1972) --- A color enhancement of an ultra-violet photograph of the geocorona, a halo of low density hydrogen around Earth. Sunlight is shining from the left, and the geocorona is brighter on that side. The UV camera was operated by astronaut John W. Young on the Apollo 16 lunar landing mission. It was designed and built at the Naval Research Laboratory, Washington, D.C. While astronauts Young, commander, and Charles M. Duke Jr., lunar module pilot, descended in the Lunar Module (LM) "Orion" to explore the Descartes highlands region of the moon, astronaut Thomas K. Mattingly II, command module pilot, remained with the Command and Service Modules (CSM) "Casper" in lunar orbit.

Six Powerful Practices for Alternative Education Programs

ERIC Educational Resources Information Center

Maillet, Andre L.

2017-01-01

Alternative schools can provide all students, especially those with challenging behaviors, low motivation, poor attendance, failing grades, or those afraid to even walk into the school building, with an engaging and enriching educational experience. Through designing, leading, and serving students as an administrator of an alternative middle…

Alternative Teacher Certification--An Update. ERIC Digest.

ERIC Educational Resources Information Center

Otuya, Ebo

This digest reviews alternative certification on the basis of educational quality and the need to fill teacher shortages. Following a definition of traditional certification, the alternative certification route is described as a process designed to certify candidates who have subject-matter competencies, without going through formal teacher…

Complementary and Alternative Therapies for Chronic Constipation

PubMed Central

2015-01-01

Chronic constipation, an ancient disease, is prevalent, and costly in the general population. Complementary and alternative therapies are frequently used for constipation. This review introduces various methods of complementary and alternative therapies, including acupuncture, moxibustion, massage, and herbal medicine. Efficacy, safety, influence factors, sham control design, and mechanisms of these therapies are discussed and evaluated. Acupuncture or electroacupuncture was found to be most commonly used for constipation among these complementary and alternative therapies, followed by herbal medicine. Although only a small number of clinical studies are flawless, our review of the literature seems to suggest that acupuncture or electroacupuncture and herbal medicine are effective in treating constipation, whereas findings on massage and moxibustion are inconclusive. More well-designed clinical trials are needed to improve and prove the efficacy of the complementary and alternative therapies for constipation; mechanistic studies that would lead to wide spread use and improvement of the methods are also discussed in this review. PMID:26064163

Valley Fill Design and Construction Alternatives to Improve Ecological Performance

EPA Pesticide Factsheets

This presentation discusses; current challenges, comprehensive approaches, BMPs, the Middlefork Development, the Guy Cove project, and a path forward when looking at construction alternatives to improve the ecological performance of valley fills.

Digital Hardware Design Teaching: An Alternative Approach

ERIC Educational Resources Information Center

Benkrid, Khaled; Clayton, Thomas

2012-01-01

This article presents the design and implementation of a complete review of undergraduate digital hardware design teaching in the School of Engineering at the University of Edinburgh. Four guiding principles have been used in this exercise: learning-outcome driven teaching, deep learning, affordability, and flexibility. This has identified…

14 CFR 135.221 - IFR: Alternate airport weather minimums.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false IFR: Alternate airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.221 IFR: Alternate airport weather minimums. No person may designate an alternate airport unless the weather reports or forecasts, or any...

14 CFR 135.221 - IFR: Alternate airport weather minimums.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false IFR: Alternate airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.221 IFR: Alternate airport weather minimums. No person may designate an alternate airport unless the weather reports or forecasts, or any...

14 CFR 135.221 - IFR: Alternate airport weather minimums.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false IFR: Alternate airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.221 IFR: Alternate airport weather minimums. No person may designate an alternate airport unless the weather reports or forecasts, or any...

14 CFR 135.221 - IFR: Alternate airport weather minimums.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false IFR: Alternate airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.221 IFR: Alternate airport weather minimums. No person may designate an alternate airport unless the weather reports or forecasts, or any...

14 CFR 135.221 - IFR: Alternate airport weather minimums.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false IFR: Alternate airport weather minimums... VFR/IFR Operating Limitations and Weather Requirements § 135.221 IFR: Alternate airport weather minimums. No person may designate an alternate airport unless the weather reports or forecasts, or any...

Alternatives for jet engine control

NASA Technical Reports Server (NTRS)

Sain, M. K.

1983-01-01

The technical progress of researches on alternatives for jet engine control, is reported. The principal new activities involved the initial testing of an input design method for choosing the inputs to a non-linear system to aid the approximation of its tensor parameters, and the beginning of order reduction studies designed to remove unnecessary monomials from tensor models.

The Design and Implementation of an Alternative High School.

ERIC Educational Resources Information Center

Kritek, William J.

The analysis of the planning for an implementation of an alternative high school in a large urban school system is the focus of this study. Interview data are used. This investigation draws on, and compliments, the previous literature on implementation. While most of the earlier studies look at failures, this one is based on an instance of…

Tapping the potential of alternative medicine.

PubMed

La Puma, J; Eiler, G

1998-04-01

Interest in alternative medicine is growing among healthcare consumers. Health plans and healthcare organizations may be able to improve clinical outcomes and benefit financially by providing patients with access to alternative services. Organizations that can assess their communities' particular needs, draw on interested professional staff to help develop alternative medicine programs and protocols, and study quality outcomes will stand a better chance of making such programs successful. Educating medical staff, designing a credible program, and forging strategic alliances with respected partners can help organizations create a sharply focused brand identity in the community.

Life cycle assessment of a parabolic trough concentrating solar power plant and the impacts of key design alternatives.

PubMed

Burkhardt, John J; Heath, Garvin A; Turchi, Craig S

2011-03-15

Climate change and water scarcity are important issues for today's power sector. To inform capacity expansion decisions, hybrid life cycle assessment is used to evaluate a reference design of a parabolic trough concentrating solar power (CSP) facility located in Daggett, CA, along four sustainability metrics: life cycle (LC) greenhouse gas (GHG) emissions, water consumption, cumulative energy demand (CED), and energy payback time (EPBT). This wet-cooled, 103 MW plant utilizes mined nitrates salts in its two-tank, thermal energy storage (TES) system. Design alternatives of dry-cooling, a thermocline TES, and synthetically derived nitrate salt are evaluated. During its LC, the reference CSP plant is estimated to emit 26 g of CO(2eq) per kWh, consume 4.7 L/kWh of water, and demand 0.40 MJ(eq)/kWh of energy, resulting in an EPBT of approximately 1 year. The dry-cooled alternative is estimated to reduce LC water consumption by 77% but increase LC GHG emissions and CED by 8%. Synthetic nitrate salts may increase LC GHG emissions by 52% compared to mined. Switching from two-tank to thermocline TES configuration reduces LC GHG emissions, most significantly for plants using synthetically derived nitrate salts. CSP can significantly reduce GHG emissions compared to fossil-fueled generation; however, dry-cooling may be required in many locations to minimize water consumption.

Radiation protective structure alternatives for habitats of a lunar base research outpost

NASA Technical Reports Server (NTRS)

Bell, Fred J.; Foo, Lai T.; Mcgrew, William P.

1988-01-01

The solar and galactic cosmic radiation levels on the Moon pose a hazard to extended manned lunar missions. Lunar soil represents an available, economical material to be used for radiation shielding. Several alternatives have been suggested to use lunar soil to protect the inhabitants of a lunar base research outpost from radiation. The Universities Space Research Association has requested that a comparative analysis of the alternatives be performed, with the purpose of developing the most advantageous design. Eight alternatives have been analyzed, including an original design which was developed to satisfy the identified design criteria. The original design consists of a cylindrical module and airlock, partially buried in the lunar soil, at a depth sufficient to achieve adequate radiation shielding. The report includes descriptions of the alternatives considered, the method of analysis used, and the final design selected.

22 CFR 129.7 - Prior approval (license).

Code of Federal Regulations, 2010 CFR

2010-04-01

...; (ii) Nuclear weapons strategic delivery systems and all components, parts, accessories, attachments specifically designed for such systems and associated equipment; (iii) Nuclear weapons design and test equipment of a nature described by Category XVI of Part 121; (iv) Naval nuclear propulsion equipment of a...

22 CFR 129.7 - Prior approval (license).

Code of Federal Regulations, 2011 CFR

2011-04-01

...; (ii) Nuclear weapons strategic delivery systems and all components, parts, accessories, attachments specifically designed for such systems and associated equipment; (iii) Nuclear weapons design and test equipment of a nature described by Category XVI of part 121; (iv) Naval nuclear propulsion equipment of a...

10 CFR 435.305 - Alternative compliance procedure.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Alternative compliance procedure. 435.305 Section 435.305... Alternative compliance procedure. (a) If a proposed building design includes unusual or innovative energy... estimated unit energy cost on the compliance forms, on the basis of selecting the optimum levels on the...

10 CFR 435.305 - Alternative compliance procedure.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Alternative compliance procedure. 435.305 Section 435.305... Alternative compliance procedure. (a) If a proposed building design includes unusual or innovative energy... estimated unit energy cost on the compliance forms, on the basis of selecting the optimum levels on the...

10 CFR 435.305 - Alternative compliance procedure.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Alternative compliance procedure. 435.305 Section 435.305... Alternative compliance procedure. (a) If a proposed building design includes unusual or innovative energy... estimated unit energy cost on the compliance forms, on the basis of selecting the optimum levels on the...

Composting on Mars or the Moon: I. Comparative evaluation of process design alternatives

NASA Technical Reports Server (NTRS)

Finstein, M. S.; Strom, P. F.; Hogan, J. A.; Cowan, R. M.; Janes, H. W. (Principal Investigator)

1999-01-01

As a candidate technology for treating solid wastes and recovering resources in bioregenerative Advanced Life Support, composting potentially offers such advantages as compactness, low mass, near ambient reactor temperatures and pressures, reliability, flexibility, simplicity, and forgiveness of operational error or neglect. Importantly, the interactions among the physical, chemical, and biological factors that govern composting system behavior are well understood. This article comparatively evaluates five Generic Systems that describe the basic alternatives to composting facility design and control. These are: 1) passive aeration; 2) passive aeration abetted by mechanical agitation; 3) forced aeration--O2 feedback control; 4) forced aeration--temperature feedback control; 5) forced aeration--integrated O2 and temperature feedback control. Each of the five has a distinctive pattern of behavior and process performance characteristics. Only Systems 4 and 5 are judged to be viable candidates for ALS on alien worlds, though which is better suited in this application is yet to be determined.

Modeling and design study using HFC-236ea as an alternative refrigerant in a centrifugal compressor. Final report, January 1994-September 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Popovic, P.; Shapiro, H.N.

1997-04-01

The Environmental Protection Agency (EPA) in cooperation with the Navy has been seeking a CFC-114 drop-in placement. One alternative HFC refrigerant which appears to satisfy all physical and chemical characteristics for the Navy fleet was found to be HFC-236ea refrigerant. The project represents a part of the investigation directed to evaluate this CFC-114 alternative refrigerant as a possible drop-in replacement in Navy chillers. The objective of the study was to conduct a thorough literature review regarding centrifugal compressors and the, on the basis of the information gathered, build an accurate but simple compressor model utilizing the available compressor experimental data.more » Further, the developed compressor model would be used to suggest eventual design adjustments to enhance compressor performance with the alternative HFC-236ea refrigerant.« less

Alternative designs for petroleum product storage tanks for groundwater protection.

PubMed

Oke Adeleke, Samson

In developing countries, there are numerous occurrences of petroleum product spillage in groundwater. The current practice of burying storage tanks beneath the surface without adequate safety devices facilitates this phenomenon. Underground tanks rust and leak, and spilled petroleum products migrate downward. The movement of the oil in the soil depends on its viscosity and quantity, the permeability of the soil/rock, and the presence of fractures within the rock. The oil spreads laterally in the form of a thin pancake due to its lower specific gravity, and soluble components dissolve in water. The pollution plume of petroleum products and dissolved phases moves in the direction of groundwater flow in the aquifer within the pores of soil and sediments or along fractures in basement complex areas. Most communities reply heavily on groundwater for potable and industrial supplies. However, the sustainability of this resource is under threat in areas where there are filling stations as a result of significant groundwater contamination from petroleum product spillage. Drinking water becomes unpalatable when it contains petroleum products in low concentrations, and small quantities may contaminate large volumes of water. Considering the losses incurred from spillage, the cost of cleaning the aquifer, and the fact that total cleansing and attenuation is impossible, the need to prevent spillage and if it happens to prevent it from getting into the groundwater system is of paramount importance. This paper proposes alternative design procedures with a view to achieving these objectives.

ALTERNATIVE FUTURES FOR THE WILLAMETTE RIVER BASIN, OREGON

EPA Science Inventory

Alternative futures analysis is an assessment approach designed to inform community decisions regarding land and water use. We conducted an alternative futures analysis in the Willamette River Basin in western Oregon. Based on detailed input from local stakeholders, three alter...

Energy Levels, Lifetimes, and Transition Rates for P-like Ions from Cr X to Zn XVI from Large-scale Relativistic Multiconfiguration Calculations

NASA Astrophysics Data System (ADS)

Wang, K.; Jönsson, P.; Gaigalas, G.; Radžiūtė, L.; Rynkun, P.; Del Zanna, G.; Chen, C. Y.

2018-04-01

The fully relativistic multiconfiguration Dirac–Hartree–Fock method is used to compute excitation energies and lifetimes for the 143 lowest states of the 3{s}23{p}3, 3s3p 4, 3{s}23{p}23d, 3s3p 33d, 3p 5, 3{s}23p3{d}2 configurations in P-like ions from Cr X to Zn XVI. Multipole (E1, M1, E2, M2) transition rates, line strengths, oscillator strengths, and branching fractions among these states are also given. Valence–valence and core–valence electron correlation effects are systematically accounted for using large basis function expansions. Computed excitation energies are compared with the NIST ASD and CHIANTI compiled values and previous calculations. The mean average absolute difference, removing obvious outliers, between computed and observed energies for the 41 lowest identified levels in Fe XII, is only 0.057%, implying that the computed energies are accurate enough to aid identification of new emission lines from the Sun and other astrophysical sources. The amount of energy and transition data of high accuracy are significantly increased for several P-like ions of astrophysics interest, where experimental data are still very scarce.

Educational Telecommunications Alternatives for Alaska. Product 1.

ERIC Educational Resources Information Center

Wilke, Jennifer L.; And Others

This study explores a wide variety of technical alternatives, from equipment needs and on-the-ground system design, to equipment operation and suggested applications for department activities, both now and in the future. Some suggested alternatives include (1) communication satellites, (2) one way audio transmission, (3) one and two way hard copy…

Large scale CIV3 calculations of fine-structure energy levels, oscillator strengths, and lifetimes in Fe XIV and Ni XVI

NASA Astrophysics Data System (ADS)

Gupta, G. P.; Msezane, A. Z.

2005-01-01

We have performed large scale CIV3 calculations of excitation energies from ground states for 109 fine-structure levels as well as of oscillator strengths and radiative decay rates for all electric-dipole-allowed and intercombination transitions among the (1s 22s 22p 6)3s 23p( 2P 0), 3s3p 2( 2S, 2P, 2D, 4P), 3s 23d( 2D), 3p 3( 4S 0, 2P 0, 2D 0), 3s3p( 3P 0)3d( 2P 0, 2D 0, 2F 0, 4P 0, 4D 0, 4F 0), 3s3p( 1P 0)3d( 2P 0, 2D 0, 2F 0), 3p 2( 1S)3d( 2D), 3p 2( 1D)3d( 2S, 2P, 2D), 3p 2( 3P)3d( 2P, 2D, 4P), 3s3d 2( 2S, 2P, 2D, 4P), 3p3d 2( 1S)( 2P 0), 3p3d 2( 1D)( 2P 0, 2D 0, 2F 0), 3p3d 2( 1G)( 2F 0), 3p3d 2( 3P)( 2P 0, 2D 0, 4S 0, 4P 0, 4D 0), 3p3d 2( 3F)( 2D 0, 2F 0, 4D 0, 4F 0), 3s 24s( 2S), 3s 24p( 2P 0), 3s 24d( 2D), 3s 24f( 2F 0), 3s3p( 3P 0)4s( 2P 0, 4P 0), and 3s3p( 1P 0)4s( 2P 0) states of Fe XIV and Ni XVI. These states are represented by very extensive configuration-interaction (CI) wavefunctions obtained using the CIV3 computer code of Hibbert. The relativistic effects in intermediate coupling are incorporated by means of the Breit-Pauli Hamiltonian which consists of the nonrelativistic term plus the one-body mass correction, Darwin term, and spin-orbit, spin-other-orbit, and spin-spin operators. The errors which often occur with sophisticated ab initio atomic structure calculations are reduced. Our calculated excitation energies, including their ordering, are in excellent agreement with the available experimental results for both of the ions studied. From our transition probabilities, we have also calculated radiative lifetimes of the lowest 37 fine-structure levels in Fe XIV and Ni XVI and compared them with available theoretical and experimental results. The mixing among several fine-structure levels is found to be so strong that the correct identification of these levels becomes very difficult. We predict new data for several levels where no other theoretical and/or experimental results are available. We hope that our extensive calculations will be useful

Technical Criteria and Procedures for Evaluating the Crashworthiness and Occupant Protection Performance of Alternatively Designed Passenger Rail Equipment for Use in Tier I Service

DOT National Transportation Integrated Search

2011-10-01

Criteria and procedures have been developed for assessing crashworthiness and occupant protection performance of alternatively designed trainsets to be used in Tier I (not exceeding 125 mph) passenger service. These criteria and procedures take advan...

Lightweight linear alternators with and without capacitive tuning

NASA Astrophysics Data System (ADS)

Niedra, Janis M.

1993-06-01

Permanent magnet excited linear alternators rated tens of kW and coupled to free-piston Stirling engines are presently viewed as promising candidates for long term generation of electric power in both space and terrestrial applications. Series capacitive cancellation of the internal inductive reactance of such alternators was considered a viable way to both increase power extraction and to suppress unstable modes of the thermodynamic oscillation. Idealized toroidal and cylindrical alternator geometries are used for a comparative study of the issues of specific mass and capacitive tuning, subject to stability criteria. The analysis shows that the stator mass of an alternator designed to be capacitively tuned is always greater than the minimum achievable stator mass of an alternator designed with no capacitors, assuming equal utilization of materials ratings and the same frequency and power to a resistive load. This conclusion is not substantially altered when the usually lesser masses of the magnets and of any capacitors are added. Within the reported stability requirements and under circumstances of normal materials ratings, this study finds no clear advantage to capacitive tuning. Comparative plots of the various constituent masses are presented versus the internal power factor taken as a design degree of freedom. The explicit formulas developed for stator core, coil, capacitor, and magnet masses and for the degree of magnet utilization provide useful estimates of scaling effects.

Lightweight linear alternators with and without capacitive tuning

NASA Technical Reports Server (NTRS)

Niedra, Janis M.

1993-01-01

Permanent magnet excited linear alternators rated tens of kW and coupled to free-piston Stirling engines are presently viewed as promising candidates for long term generation of electric power in both space and terrestrial applications. Series capacitive cancellation of the internal inductive reactance of such alternators was considered a viable way to both increase power extraction and to suppress unstable modes of the thermodynamic oscillation. Idealized toroidal and cylindrical alternator geometries are used for a comparative study of the issues of specific mass and capacitive tuning, subject to stability criteria. The analysis shows that the stator mass of an alternator designed to be capacitively tuned is always greater than the minimum achievable stator mass of an alternator designed with no capacitors, assuming equal utilization of materials ratings and the same frequency and power to a resistive load. This conclusion is not substantially altered when the usually lesser masses of the magnets and of any capacitors are added. Within the reported stability requirements and under circumstances of normal materials ratings, this study finds no clear advantage to capacitive tuning. Comparative plots of the various constituent masses are presented versus the internal power factor taken as a design degree of freedom. The explicit formulas developed for stator core, coil, capacitor, and magnet masses and for the degree of magnet utilization provide useful estimates of scaling effects.

49 CFR 229.209 - Alternative locomotive crashworthiness designs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... locomotive crashworthiness design, in detail; (3) The intended type of service for locomotives built under the proposed design; and (4) Appropriate data and analysis showing how the design either satisfies the requirements of § 229.205 for the type of locomotive or provides at least an equivalent level of safety. Types...

Alternative Affinity Ligands for Immunoglobulins.

PubMed

Kruljec, Nika; Bratkovič, Tomaž

2017-08-16

The demand for recombinant therapeutic antibodies and Fc-fusion proteins is expected to increase in the years to come. Hence, extensive efforts are concentrated on improving the downstream processing. In particular, the development of better-affinity chromatography matrices, supporting robust time- and cost-effective antibody purification, is warranted. With the advances in molecular design and high-throughput screening approaches from chemical and biological combinatorial libraries, novel affinity ligands representing alternatives to bacterial immunoglobulin (Ig)-binding proteins have entered the scene. Here, we review the design, development, and properties of diverse classes of alternative antibody-binding ligands, ranging from engineered versions of Ig-binding proteins, to artificial binding proteins, peptides, aptamers, and synthetic small-molecular-weight compounds. We also provide examples of applications for the novel affinity matrices in chromatography and beyond.

Reduced-size spiral antenna design using dielectric overlay loading for use in ground penetrating radar and design of alternative antennas using Vivaldi radiators

NASA Astrophysics Data System (ADS)

Paolino, Donald D.; Neel, Michael M.; Franck, Charmaine C.

2002-08-01

Spiral antennas are one of the common radiators used in ground penetrating radar (GPR). Mine detection is generally performed in a frequency band of interest between 500 MHz to 4 GHz. This paper discusses technical recommendations and R&D performed by Naval Air Warfare Center (NAWC), China Lake, CA , resulting in our best effort spiral design emphasizing highest low band gain while maintaining overall axial ratio purity. This design consisted of a spiral printed on a high dielectric substrate that allowed the antenna to be used at lower frequencies then conventional plastic substrate based two arm spirals of the same diameter. A graded dielectric overlay scheme was employed to facilitate matching to free space on one side, and absorber lined cavity on the other. Test data is given in terms of match and free space patterns using spin linear sources to obtain antenna axial ratios. The low-end gain was improved from -17 dBi to -5 dBi. Two Vivaldi slot antennas (star junction fed and an antipodal construction) are discussed as alternative antennas offering broadband high gain and economical construction. Both designs produced good patterns with a +5 dBi average gain over the band. Patterns for the log spiral and Archimedean spiral, together with recommendations for future improvements are provided.

76 FR 26651 - Reducing Regulatory Burden; Retrospective Review Under E.O. 13563

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

... Department of State's plan is designed to create a defined mechanism for identifying certain significant... Already Underway Independent of E.O. 13563 a. Summary of Pre-Existing Agency Efforts (Independent of E.O...--Spacecraft Systems and Associated Equipment [cir] Category XVI--Nuclear Weapons, Design and Testing Related...

Alternative Instructional Strategies in an IS Curriculum

ERIC Educational Resources Information Center

Parker, Kevin R.; LeRouge, Cynthia; Trimmer, Ken

2005-01-01

Systems Analysis and Design is a core component of an education in information systems. To appeal to a wider range of constituents and facilitate the learning process, the content of a traditional Systems Analysis and Design course has been supplemented with an alternative modeling approach. This paper presents an instructional design that…

Methods for Characterization of Alternative RNA Splicing.

PubMed

Harvey, Samuel E; Cheng, Chonghui

2016-01-01

Quantification of alternative splicing to detect the abundance of differentially spliced isoforms of a gene in total RNA can be accomplished via RT-PCR using both quantitative real-time and semi-quantitative PCR methods. These methods require careful PCR primer design to ensure specific detection of particular splice isoforms. We also describe analysis of alternative splicing using a splicing "minigene" in mammalian cell tissue culture to facilitate investigation of the regulation of alternative splicing of a particular exon of interest.

An alternative design for a sparse distributed memory

NASA Technical Reports Server (NTRS)

Jaeckel, Louis A.

1989-01-01

A new design for a Sparse Distributed Memory, called the selected-coordinate design, is described. As in the original design, there are a large number of memory locations, each of which may be activated by many different addresses (binary vectors) in a very large address space. Each memory location is defined by specifying ten selected coordinates (bit positions in the address vectors) and a set of corresponding assigned values, consisting of one bit for each selected coordinate. A memory location is activated by an address if, for all ten of the locations's selected coordinates, the corresponding bits in the address vector match the respective assigned value bits, regardless of the other bits in the address vector. Some comparative memory capacity and signal-to-noise ratio estimates for the both the new and original designs are given. A few possible hardware embodiments of the new design are described.

Impact of Rate Design Alternatives on Residential Solar Customer Bills. Increased Fixed Charges, Minimum Bills and Demand-based Rates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bird, Lori; Davidson, Carolyn; McLaren, Joyce

With rapid growth in energy efficiency and distributed generation, electric utilities are anticipating stagnant or decreasing electricity sales, particularly in the residential sector. Utilities are increasingly considering alternative rates structures that are designed to recover fixed costs from residential solar photovoltaic (PV) customers with low net electricity consumption. Proposed structures have included fixed charge increases, minimum bills, and increasingly, demand rates - for net metered customers and all customers. This study examines the electricity bill implications of various residential rate alternatives for multiple locations within the United States. For the locations analyzed, the results suggest that residential PV customers offset,more » on average, between 60% and 99% of their annual load. However, roughly 65% of a typical customer's electricity demand is non-coincidental with PV generation, so the typical PV customer is generally highly reliant on the grid for pooling services.« less

Alternative Sport Programmes and Social Inclusion in Norway

ERIC Educational Resources Information Center

Skille, Eivind Asrum; Waddington, Ivan

2006-01-01

This article examines the "alternative" sport and physical activities provided by the Sports City Programme (SCP) in Norway, which are designed to attract more young people (especially inactive young people) to take part in physical activities. In particular, it examines whether these "alternative" sports have been more…

Variables Affecting the Success of Alternative School Programs in Mississippi

ERIC Educational Resources Information Center

Haley, Sherlyn Williams

2009-01-01

This study focused on examining the effect of two alternative school types on student success in Mississippi. To determine alternative school type, alternative program directors self-reported program design, and schools were divided into two groups. Type I schools were defined as "punitive-based" programs in which students receive…

Exploration of a Capability-Focused Aerospace System of Systems Architecture Alternative with Bilayer Design Space, Based on RST-SOM Algorithmic Methods

PubMed Central

Li, Zhifei; Qin, Dongliang

2014-01-01

In defense related programs, the use of capability-based analysis, design, and acquisition has been significant. In order to confront one of the most challenging features of a huge design space in capability based analysis (CBA), a literature review of design space exploration was first examined. Then, in the process of an aerospace system of systems design space exploration, a bilayer mapping method was put forward, based on the existing experimental and operating data. Finally, the feasibility of the foregoing approach was demonstrated with an illustrative example. With the data mining RST (rough sets theory) and SOM (self-organized mapping) techniques, the alternative to the aerospace system of systems architecture was mapping from P-space (performance space) to C-space (configuration space), and then from C-space to D-space (design space), respectively. Ultimately, the performance space was mapped to the design space, which completed the exploration and preliminary reduction of the entire design space. This method provides a computational analysis and implementation scheme for large-scale simulation. PMID:24790572

Exploration of a capability-focused aerospace system of systems architecture alternative with bilayer design space, based on RST-SOM algorithmic methods.

PubMed

Li, Zhifei; Qin, Dongliang; Yang, Feng

2014-01-01

In defense related programs, the use of capability-based analysis, design, and acquisition has been significant. In order to confront one of the most challenging features of a huge design space in capability based analysis (CBA), a literature review of design space exploration was first examined. Then, in the process of an aerospace system of systems design space exploration, a bilayer mapping method was put forward, based on the existing experimental and operating data. Finally, the feasibility of the foregoing approach was demonstrated with an illustrative example. With the data mining RST (rough sets theory) and SOM (self-organized mapping) techniques, the alternative to the aerospace system of systems architecture was mapping from P-space (performance space) to C-space (configuration space), and then from C-space to D-space (design space), respectively. Ultimately, the performance space was mapped to the design space, which completed the exploration and preliminary reduction of the entire design space. This method provides a computational analysis and implementation scheme for large-scale simulation.

Assessment of 25 kW free-piston Stirling technology alternatives for solar applications

NASA Technical Reports Server (NTRS)

Erbeznik, Raymond M.; White, Maurice A.; Penswick, L. B.; Neely, Ronald E.; Ritter, Darren C.; Wallace, David A.

1992-01-01

The final design, construction, and testing of a 25-kW free-piston advanced Stirling conversion system (ASCS) are examined. The final design of the free-piston hydraulic ASCS consists of five subsystems: heat transport subsystem (solar receiver and pool boiler), free-piston hydraulic Stirling engine, hydraulic subsystem, cooling subsystem, and electrical and control subsystem. Advantages and disadvantages are identified for each technology alternative. Technology alternatives considered are gas bearings vs flexure bearings, stationary magnet linear alternator vs moving magnetic linear alternator, and seven different control options. Component designs are generated using available in-house procedures to meet the requirements of the free-piston Stirling convertor configurations.

BWR Steam Dryer Alternating Stress Assessment Procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morante, R. J.; Hambric, S. A.; Ziada, S.

2016-12-01

This report presents an overview of Boiling Water Reactor (BWR) steam dryer design; the fatigue cracking failures that occurred at the Quad Cities (QC) plants and their root causes; a history of BWR Extended Power Uprates (EPUs) in the USA; and a discussion of steam dryer modifications/replacements, alternating stress mechanisms on steam dryers, and structural integrity evaluations (static and alternating stress).

10 CFR 61.54 - Alternative requirements for design and operations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Section 61.54 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Technical Requirements for Land Disposal Facilities § 61.54 Alternative requirements for... other than those set forth in §§ 61.51 through 61.53 for the segregation and disposal of waste and for...

10 CFR 61.54 - Alternative requirements for design and operations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Section 61.54 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Technical Requirements for Land Disposal Facilities § 61.54 Alternative requirements for... other than those set forth in §§ 61.51 through 61.53 for the segregation and disposal of waste and for...

10 CFR 61.54 - Alternative requirements for design and operations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Section 61.54 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Technical Requirements for Land Disposal Facilities § 61.54 Alternative requirements for... other than those set forth in §§ 61.51 through 61.53 for the segregation and disposal of waste and for...

10 CFR 61.54 - Alternative requirements for design and operations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 61.54 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Technical Requirements for Land Disposal Facilities § 61.54 Alternative requirements for... other than those set forth in §§ 61.51 through 61.53 for the segregation and disposal of waste and for...

10 CFR 61.54 - Alternative requirements for design and operations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Section 61.54 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Technical Requirements for Land Disposal Facilities § 61.54 Alternative requirements for... other than those set forth in §§ 61.51 through 61.53 for the segregation and disposal of waste and for...

Alternative analyses of locomotive structural designs for crashworthiness

DOT National Transportation Integrated Search

2000-01-01

Enhanced crashworthiness performance of North American locomotives is proposed by both increasing the design loads on specific structural components or by describing the crashworthiness performance under specific impact conditions. The design loads f...

The Explorer XVI Micrometeoroid Satellite Description and Preliminary Results for the Period December 16, 1962 Through January 13, 1963

NASA Technical Reports Server (NTRS)

Hastings, E. C., Jr.

1963-01-01

Explorer XVI (1962 Beta Chi l) data that have been analyzed for the period between December 16, 1962 (launch date), and January 13, 1963, indicate that the orbit achieved was close to the predicted orbit. Ten punctures of annealed 0.001-inch-thick beryllium-copper have been used to determine a puncture rate of 0.035 per square foot per day in this material. One puncture of a 0.002-inch-thick sample has also occurred in this period. A tentative evaluation of the puncture rate for the 0.001-inch beryllium-copper in terms of the rate for an equivalent thickness of aluminum has been attempted, and the result has been compared with two different puncture rate estimates. The three micrometeoroid impact detecting systems are operating. Counting rates for the high- and low-sensitivity systems were close to anticipated values near the end of one week. Two of the 0.001-inch-steel-covered grid detectors have been punctured, but none of the 0.003- or 0.006-inch-steel-covered grid detectors have indicated punctures. One of the cadmium sulfide cells indicates three punctures of the 0.00025-inch Mylar cover. None of the 0.002- or 0.003-inch-copper-wire cards have indicated a break in the period covered. Telemetry temperatures were initially higher than expected although they remained well within operating limits. Sensor temperatures have remained within the expected bounds.

A Proposed Design for an Interim Space Rescue Ferry Vehicle.

DTIC Science & Technology

1985-12-01

Mussack of the SOS Lab deserves credit for helping me to determine the effects of plume impingement on vehicle control. Jack Tiffany, head of the AFIT... Effective Thruster Forces .. .......... . 85 XV. Simulation Results--Solo MMU/Primary Control Mode ....... .................... 91 XVI. Simulation...will be made as explained in 2 and 3 (9:2-34--36). Figure 2.7 does not reflect the effects of a limb motion filter, which briefly delays AAH response

Life cycle assessment of a power tower concentrating solar plant and the impacts of key design alternatives.

PubMed

Whitaker, Michael B; Heath, Garvin A; Burkhardt, John J; Turchi, Craig S

2013-06-04

A hybrid life cycle assessment (LCA) is used to evaluate four sustainability metrics over the life cycle of a power tower concentrating solar power (CSP) facility: greenhouse gas (GHG) emissions, water consumption, cumulative energy demand (CED), and energy payback time (EPBT). The reference design is for a dry-cooled, 106 MW(net) power tower facility located near Tucson, AZ that uses a mixture of mined nitrate salts as the heat transfer fluid and storage medium, a two-tank thermal energy storage system designed for six hours of full load-equivalent storage, and receives auxiliary power from the local electric grid. A thermocline-based storage system, synthetically derived salts, and natural gas auxiliary power are evaluated as design alternatives. Over its life cycle, the reference plant is estimated to have GHG emissions of 37 g CO2eq/kWh, consume 1.4 L/kWh of water and 0.49 MJ/kWh of energy, and have an EPBT of 15 months. Using synthetic salts is estimated to increase GHG emissions by 12%, CED by 7%, and water consumption by 4% compared to mined salts. Natural gas auxiliary power results in greater than 10% decreases in GHG emissions, water consumption, and CED. The thermocline design is most advantageous when coupled with the use of synthetic salts.

Promising roadmap alternatives for the SpaceLiner

NASA Astrophysics Data System (ADS)

Sippel, Martin

2010-06-01

The paper describes the vision and potential roadmap alternatives of an ultrafast intercontinental passenger transport based on a rocket powered two-stage reusable vehicle. An operational scenario and the latest technical lay-out of the configuration's preliminary design including flight performance are described. The question of how the revolutionary ultrafast transport can be realized is addressed by an assessment of the different technological and programmatic roadmap alternatives.

1 CFR 16.1 - Designation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 General Provisions 1 2011-01-01 2011-01-01 false Designation. 16.1 Section 16.1 General... DOCUMENTS AGENCY REPRESENTATIVES § 16.1 Designation. (a) Each agency shall designate, from its officers or...: (1) A liaison officer and an alternate. (2) A certifying officer and an alternate. (3) An authorizing...

1 CFR 16.1 - Designation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Designation. 16.1 Section 16.1 General... DOCUMENTS AGENCY REPRESENTATIVES § 16.1 Designation. (a) Each agency shall designate, from its officers or...: (1) A liaison officer and an alternate. (2) A certifying officer and an alternate. (3) An authorizing...

1 CFR 16.1 - Designation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 1 General Provisions 1 2013-01-01 2012-01-01 true Designation. 16.1 Section 16.1 General... DOCUMENTS AGENCY REPRESENTATIVES § 16.1 Designation. (a) Each agency shall designate, from its officers or...: (1) A liaison officer and an alternate. (2) A certifying officer and an alternate. (3) An authorizing...

1 CFR 16.1 - Designation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 1 General Provisions 1 2012-01-01 2012-01-01 false Designation. 16.1 Section 16.1 General... DOCUMENTS AGENCY REPRESENTATIVES § 16.1 Designation. (a) Each agency shall designate, from its officers or...: (1) A liaison officer and an alternate. (2) A certifying officer and an alternate. (3) An authorizing...

1 CFR 16.1 - Designation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 1 General Provisions 1 2014-01-01 2012-01-01 true Designation. 16.1 Section 16.1 General... DOCUMENTS AGENCY REPRESENTATIVES § 16.1 Designation. (a) Each agency shall designate, from its officers or...: (1) A liaison officer and an alternate. (2) A certifying officer and an alternate. (3) An authorizing...

An alternate binding site for PPARγ ligands

PubMed Central

Hughes, Travis S.; Giri, Pankaj Kumar; de Vera, Ian Mitchelle S.; Marciano, David P.; Kuruvilla, Dana S.; Shin, Youseung; Blayo, Anne-Laure; Kamenecka, Theodore M.; Burris, Thomas P.; Griffin, Patrick R.; Kojetin, Douglas J.

2014-01-01

PPARγ is a target for insulin sensitizing drugs such as glitazones, which improve plasma glucose maintenance in patients with diabetes. Synthetic ligands have been designed to mimic endogenous ligand binding to a canonical ligand-binding pocket to hyperactivate PPARγ. Here we reveal that synthetic PPARγ ligands also bind to an alternate site, leading to unique receptor conformational changes that impact coregulator binding, transactivation and target gene expression. Using structure-function studies we show that alternate site binding occurs at pharmacologically relevant ligand concentrations, and is neither blocked by covalently bound synthetic antagonists nor by endogenous ligands indicating non-overlapping binding with the canonical pocket. Alternate site binding likely contributes to PPARγ hyperactivation in vivo, perhaps explaining why PPARγ full and partial or weak agonists display similar adverse effects. These findings expand our understanding of PPARγ activation by ligands and suggest that allosteric modulators could be designed to fine tune PPARγ activity without competing with endogenous ligands. PMID:24705063

33 CFR 154.1026 - Qualified individual and alternate qualified individual.

Code of Federal Regulations, 2010 CFR

2010-07-01

... alternate must: (1) Be located in the United States; (2) Speak fluent English; (3) Be familiar with the... facility may designate an organization to fulfill the role of the qualified individual and the alternate...

Alternative strategies: a better alternative.

PubMed

Doody, Dennis

2010-05-01

Alternatives can be defined as being any financial asset other than traditional stocks and bonds. They include marketable alternatives, private capital, and equity real estate. There are two primary reasons for investing in alternatives: the potential for greater return and the opportunity to diversify a portfolio. Although alternatives were challenged in the highly volatile environment that existed in 2008 and early 2009, they generally lived up to expectations.

Alternative Teacher Certification: Secondary School Principals' Perspective in Indiana

ERIC Educational Resources Information Center

Newblom, Jane Corinne

2013-01-01

As teacher recruitment intensifies to locate qualified teachers for our nation's classrooms, alternative teacher certification programs are becoming prevalent. Initially these programs were designed to attract professionals and college graduates to enter urban classrooms. However, what has occurred is that over 140 alternative certification…

Corrosion performance of alternative steam generator materials and designs. Volume 2. Posttest examination of a seawater-faulted alternative materials model steam generator. Final report. [PWR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krupowicz, J.J.; Scott, D.B.; Fink, G.C.

Corrosion results obtained from the post-test non-destructive and destructive examinations of an alternative materials model steam generator are described in this final report. The model operated under representative thermal and hydraulic and accelerated (high seawater contaminant concentration) steam generator secondary water chemistry conditions. Total exposure consisted of 114 steaming days under all volatile treatment (AVT) chemistry conditions followed by 282 fault steaming days at a 30 ppM chloride concentration in the secondary bulk water. Various support plate and lattice strip support designs incorporated Types 347, 405, 409 and SCR-3 stainless steels; Alloys 600 and 690; and carbon steel. Heat transfermore » tube materials included Alloy 600 in various heat treated conditions, Alloy 690, and Alloy 800. All tubing materials in this test exhibited moderate pitting, primarily in the sludge pile region above the tubesheet.« less

Corrosion performance of alternative steam generator materials and designs. Volume 3. Posttest examination of a freshwater-faulted alternative materials model steam generator. Final report. [PWR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krupowicz, J.J.; Scott, D.B.; Rentler, R.M.

Corrosion results obtained from the post-test non-destructive and destructive examinations of an alternative materials model steam generator are described in this final report. The model operated under representative thermal and hydraulic and accelerated (high fresh water contaminant concentration) steam generator secondary water chemistry conditions. Total exposure consisted of 114 steaming days under all volatile treatment (AVT) chemistry conditions followed by 358 fault steaming days at a 40 ppM sulfate concentration in the secondary bulk water. Various support plate and lattice strip support designs incorporated Types 347, 405, 409 and SCR-3 stainless steels; Alloys 600 and 690; and carbon steel. Heatmore » transfer tube materials included Alloy 600 in various heat treated conditions, Alloy 690, and Alloy 800. All tubing materials in this test exhibited significant general corrosion beneath thick surface deposits.« less

Alternative Fuels Data Center: Underwriters Laboratories Ethanol Dispenser

Science.gov Websites

alternate equivalent dispenser design to be submitted for approval. Each jurisdiction has its own process grant a waiver or variance on a case-by-case basis for alternative equivalent dispensers for mid- to procedures used to evaluate the product. The group of manufacturers and industry partners interested in

The Integration of an Alternative Curriculum: Skill Force

ERIC Educational Resources Information Center

Rogers, Lynne; Hallam, Susan; Shaw, Jacquelene; Rhamie, Jasmine

2009-01-01

The introduction of alternative curricula in the UK for students in the secondary phase is one of a number of strategies designed to improve attendance at school, reduce exclusion and improve attainment. Skill Force is a charitable youth initiative that offers 14- to 16-year-old students a key skills based vocational alternative to the traditional…

The Lockheed alternate partial polarizer universal filter

NASA Technical Reports Server (NTRS)

Title, A. M.

1976-01-01

A tunable birefringent filter using an alternate partial polarizer design has been built. The filter has a transmission of 38% in polarized light. Its full width at half maximum is .09A at 5500A. It is tunable from 4500 to 8500A by means of stepping motor actuated rotating half wave plates and polarizers. Wave length commands and thermal compensation commands are generated by a PPD 11/10 minicomputer. The alternate partial polarizer universal filter is compared with the universal birefringent filter and the design techniques, construction methods, and filter performance are discussed in some detail. Based on the experience of this filter some conclusions regarding the future of birefringent filters are elaborated.

Alternate bearing design fabrication and test program, exhibit B

NASA Technical Reports Server (NTRS)

1978-01-01

A 50 ft-lb-sec (FPS) reaction wheel was modified with an ironless armature brushless dc motor and a magnetic bearing suspension. The purpose was to demonstrate the performance of an alternate bearing concept, i.e., a magnetic bearing suspension, which could be used in Skylab type CMG's to meet the attitude control requirements of long term space stations. A magnetic suspension was built, installed and tested in the 50 FPS reaction wheel. A secondary effort included the build and test of a compatible reaction wheel motor. Performance characteristics of both are presented and discussed.

Cadmium Alternatives for High-Strength Steel

DTIC Science & Technology

2011-09-22

coating small parts, a barrel coater was developed which originally coated 75 pounds of steel fasteners during a coating run. By the early 1980s...technique to define design allowables. Other design authorities rely more heavily on axial tension-tension or tension- compression data. Some axial ...FINAL REPORT Cadmium Alternatives for High-Strength Steel WP-200022 Steven A. Brown Naval Air Warfare Center Aircraft Division Patuxent

NASA Alternative Aviation Fuel Research

NASA Astrophysics Data System (ADS)

Anderson, B. E.; Beyersdorf, A. J.; Thornhill, K. L., II; Moore, R.; Shook, M.; Winstead, E.; Ziemba, L. D.; Crumeyrolle, S.

2015-12-01

We present an overview of research conducted by NASA Aeronautics Research Mission Directorate to evaluate the performance and emissions of "drop-in" alternative jet fuels, highlighting experiment design and results from the Alternative Aviation Fuel Experiments (AAFEX-I & -II) and Alternative Fuel-Effects on Contrails and Cruise Emissions flight series (ACCESS-I & II). These projects included almost 100 hours of sampling exhaust emissions from the NASA DC-8 aircraft in both ground and airborne operation and at idle to takeoff thrust settings. Tested fuels included Fischer-Tropsch (FT) synthetic kerosenes manufactured from coal and natural-gas feedstocks; Hydro-treated Esters and Fatty-Acids (HEFA) fuels made from beef-tallow and camelina-plant oil; and 50:50 blends of these alternative fuels with Jet A. Experiments were also conducted with FT and Jet A fuels doped with tetrahydrothiophene to examine the effects of fuel sulfur on volatile aerosol and contrail formation and microphysical properties. Results indicate that although the absence of aromatic compounds in the alternative fuels caused DC-8 fuel-system leaks, the fuels did not compromise engine performance or combustion efficiency. And whereas the alternative fuels produced only slightly different gas-phase emissions, dramatic reductions in non-volatile particulate matter (nvPM) emissions were observed when burning the pure alternative fuels, particularly at low thrust settings where particle number and mass emissions were an order of magnitude lower than measured from standard jet fuel combustion; 50:50 blends of Jet A and alternative fuels typically reduced nvPM emissions by ~50% across all thrust settings. Alternative fuels with the highest hydrogen content produced the greatest nvPM reductions. For Jet A and fuel blends, nvPM emissions were positively correlated with fuel aromatic and naphthalene content. Fuel sulfur content regulated nucleation mode aerosol number and mass concentrations within aging

TO "LIMITATIONS OF ROI TESTING FOR VENTING DESIGN: DESCRIPTION OF AN ALTERNATIVE APPROACH BASED ON ATTAINMENT OF A CRITICAL PORE-GAS VELOCITY IN CONTAMINATED MEDIA

EPA Science Inventory

In this paper, we describe the limitations of radius of influence (ROI) evaluation for venting design in more detail than has been done previously and propose an alternative method based on specification and attainment of critical pore-gas velocities in contaminated subsurface me...

Study of the liquid-film-forming apparatus as an alternative aeration system: design criteria and operating condition.

PubMed

Hongprasith, Narapong; Imai, Tsuyoshi; Painmanakul, Pisut

2017-06-01

Aeration is an important factor in aquaculture systems because it is a vital condition for all organisms that live in water and respire aerobically. Generally, mechanical surface aerators are widely used in Thailand due to their advantage for increasing dissolved oxygen (DO) and for their horizontal mixing of aquaculture ponds with large surface areas. However, these systems still have some drawbacks, primarily the low oxygen transfer efficiency (OTE) and energy. Regarding this issue, alternative aeration systems should be studied and applied. Therefore, this research aims to study the aeration mechanism obtained by the diffused-air aeration combined with a liquid-film-forming apparatus (LFFA). The effect of gas flow rates, types, and patterns of aerator installation were investigated in an aquaculture pond of 10 m × 10 m × 1.5 m. The analytical parameters were volumetric mass transfer coefficient (k L a), OTE, and aeration efficiency (AE). From the results, the '4-D' with partitions was proposed as the suitable pattern for the LFFA installation. The advantage could be obtained from high energy performance with 1.2 kg/kW h of AE. Then, the operation conditions can be applied as a design guideline for this alternative aeration system in the aquaculture ponds.

Alternative sampling designs and estimators for annual surveys

Treesearch

Paul C. Van Deusen

2000-01-01

Annual forest inventory systems in the United States have generally converged on sampling designs that: (1) measure equal proportions of the total number of plots each year; and (2) call for the plots to be systematically dispersed. However, there will inevitably be a need to deviate from the basic design to respond to special requests, natural disasters, and budgetary...

Three-dimensional analysis of the Pratt and Whitney alternate design SSME fuel turbine

NASA Technical Reports Server (NTRS)

Kirtley, K. R.; Beach, T. A.; Adamczyk, J. J.

1991-01-01

The three dimensional viscous time-mean flow in the Pratt and Whitney alternate design space shuttle main engine fuel turbine is simulated using the average passage Navier-Stokes equations. The migration of secondary flows generated by upstream blade rows and their effect on the performance of downstream blade rows is studied. The present simulation confirms that the flow in this two stage turbine is highly three dimensional and dominated by the tip leakage flow. The tip leakage vortex generated by the first blade persists through the second blade and adversely affects its performance. The greatest mixing of the inlet total temperature distortion occurs in the second vane and is due to the large leakage vortex generated by the upstream rotor. It is assumed that the predominant spanwise mixing mechanism in this low aspect ratio turbine is the radial transport due to the deterministically unsteady vortical flow generated by upstream blade rows. A by-product of the analysis is accurate pressure and heat loads for all blade rows under the influence of neighboring blade rows. These aero loads are useful for advanced structural analysis of the vanes and blades.

Assessment of Alternative RF Linac Structures for APT

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The APT program has been examining both normal and superconducting variants of the APT linac for the past two years. A decision on which of the two will be the selected technology will depend upon several considerations including the results of ongoing feasibility experiments, the performance and overall attractiveness of each of the design concepts, and an assessment of the system-level features of both alternatives. The primary objective of the Assessment of Alternative RF Linac Structures for APT study reported herein was to assess and compare, at the system-level, the performance, capital and life cycle costs, reliability/availability/maintainability (RAM) and manufacturingmore » schedules of APT RF linear accelerators based upon both superconducting and normal conducting technologies. A secondary objective was to perform trade studies to explore opportunities for system optimization, technology substitution and alternative growth pathways and to identify sensitivities to design uncertainties.« less

A simple and efficient alternative to implementing systematic random sampling in stereological designs without a motorized microscope stage.

PubMed

Melvin, Neal R; Poda, Daniel; Sutherland, Robert J

2007-10-01

When properly applied, stereology is a very robust and efficient method to quantify a variety of parameters from biological material. A common sampling strategy in stereology is systematic random sampling, which involves choosing a random sampling [corrected] start point outside the structure of interest, and sampling relevant objects at [corrected] sites that are placed at pre-determined, equidistant intervals. This has proven to be a very efficient sampling strategy, and is used widely in stereological designs. At the microscopic level, this is most often achieved through the use of a motorized stage that facilitates the systematic random stepping across the structure of interest. Here, we report a simple, precise and cost-effective software-based alternative to accomplishing systematic random sampling under the microscope. We believe that this approach will facilitate the use of stereological designs that employ systematic random sampling in laboratories that lack the resources to acquire costly, fully automated systems.

The applicability of chemical alternatives assessment for engineered nanomaterials.

PubMed

Hjorth, Rune; Hansen, Steffen Foss; Jacobs, Molly; Tickner, Joel; Ellenbecker, Michael; Baun, Anders

2017-01-01

The use of alternatives assessment to substitute hazardous chemicals with inherently safer options is gaining momentum worldwide as a legislative and corporate strategy to minimize consumer, occupational, and environmental risks. Engineered nanomaterials represent an interesting case for alternatives assessment approaches, because they can be considered both emerging "chemicals" of concern, as well as potentially safer alternatives to hazardous chemicals. However, comparing the hazards of nanomaterials to traditional chemicals or to other nanomaterials is challenging, and critical elements in chemical hazard and exposure assessment may have to be fundamentally altered to sufficiently address nanomaterials. The aim of this paper is to assess the overall applicability of alternatives assessment methods for nanomaterials and to outline recommendations to enhance their use in this context. The present paper focuses on the adaptability of existing hazard and exposure assessment approaches to engineered nanomaterials as well as strategies to design inherently safer nanomaterials. We argue that alternatives assessment for nanomaterials is complicated by the sheer number of nanomaterials possible. As a result, the inclusion of new data tools that can efficiently and effectively evaluate nanomaterials as substitutes is needed to strengthen the alternatives assessment process. However, we conclude that with additional tools to enhance traditional hazard and exposure assessment modules of alternatives assessment, such as the use of mechanistic toxicity screens and control banding tools, alternatives assessment can be adapted to evaluate engineered nanomaterials as potential substitutes for chemicals of concern and to ensure safer nanomaterials are incorporated in the design of new products. Integr Environ Assess Manag 2017;13:177-187. © 2016 SETAC. © 2016 SETAC.

Systemic Operational Design: An Alternative to Estimate Planning

DTIC Science & Technology

2009-05-04

relationships found in the COE. Framing and campaign design, with emphasis on systems theory , have therefore made their way to the forefront of doctrinal...short explanation of the systems theory behind SOD, examines how the SOD process happens, and compares SOD with the time proven “Commander’s Estimate... Theory , Campaign planning, Contemporary Operating Environment, Commander’s Estimate Process, Operational design 16. SECURITY CLASSIFICATION OF

Design element alternatives for stress-management intervention websites.

PubMed

Williams, Reg A; Gatien, Gary; Hagerty, Bonnie

2011-01-01

Typical public and military-sponsored websites on stress and depression tend to be prescriptive. Some require users to complete lengthy questionnaires. Others reproduce printed flyers, papers, or educational materials not adapted for online use. Some websites require users to follow a prescribed path through the material. Stress Gym was developed as a first-level, evidence-based, website intervention to help U.S. military members learn how to manage mild to moderate stress and depressive symptoms using a self-help intervention with progress tracking and 24/7 availablility. It was designed using web-based, health-management intervention design elements that have been proven effective and users reported they prefer. These included interactivity, self-pacing, and pleasing aesthetics. Users learned how to manage stress by accessing modules they choose, and by practicing proven stress management strategies interactively immediately after login. Test results of Stress Gym with Navy members demonstrated that it was effective, with significant decreases in reported perceived stress levels from baseline to follow-up assessment. Stress Gym used design elements that may serve as a model for future websites to emulate and improve upon, and as a template against which to compare and contrast the design and functionality of future online, health-intervention websites. Copyright © 2011 Elsevier Inc. All rights reserved.

Alternative Practice Dental Hygiene in California: Past, Present, and Future

PubMed Central

MERTZ, ELIZABETH; GLASSMAN, PAUL

2012-01-01

This study examines the development of the registered dental hygienist in alternative practice in California through an analysis of archival documents, stakeholder interviews, and two surveys of the registered dental hygienist in alternative practice. Designing, testing and implementing a new practice model for dental hygienists took 23 years. Today, registered dental hygienists in alternative practice have developed viable alternative methods for delivering preventive oral health care services in a range of settings with patients who often have no other source of access to care. PMID:21337961

NPS alternate techsat satellite, design project for AE-4871

NASA Technical Reports Server (NTRS)

1993-01-01

This project was completed as part of AE-4871, Advanced Spacecraft Design. The intent of the course is to provide experience in the design of all the major components in a spacecraft system. Team members were given responsibility for the design of one of the six primary subsystems: power, structures, propulsion, attitude control, telemetry, tracking and control (TT&C), and thermal control. In addition, a single member worked on configuration control, launch vehicle integration, and a spacecraft test plan. Given an eleven week time constraint, a preliminary design of each subsystem was completed. Where possible, possible component selections were also made. Assistance for this project came principally from the Naval Research Laboratory's Spacecraft Technology Branch. Specific information on components was solicited from representatives in industry. The design project centers on a general purpose satellite bus that is currently being sought by the Strategic Defense Initiative.

Alternative Fuels Data Center: Alternative Fueling Station Locator

Science.gov Websites

Locate Stations Printable Version Share this resource Send a link to Alternative Fuels Data Center : Alternative Fueling Station Locator to someone by E-mail Share Alternative Fuels Data Center: Alternative Fuels Data Center: Alternative Fueling Station Locator on Digg Find More places to share Alternative

Simulation study to determine the impact of different design features on design efficiency in discrete choice experiments

PubMed Central

Vanniyasingam, Thuva; Cunningham, Charles E; Foster, Gary; Thabane, Lehana

2016-01-01

Objectives Discrete choice experiments (DCEs) are routinely used to elicit patient preferences to improve health outcomes and healthcare services. While many fractional factorial designs can be created, some are more statistically optimal than others. The objective of this simulation study was to investigate how varying the number of (1) attributes, (2) levels within attributes, (3) alternatives and (4) choice tasks per survey will improve or compromise the statistical efficiency of an experimental design. Design and methods A total of 3204 DCE designs were created to assess how relative design efficiency (d-efficiency) is influenced by varying the number of choice tasks (2–20), alternatives (2–5), attributes (2–20) and attribute levels (2–5) of a design. Choice tasks were created by randomly allocating attribute and attribute level combinations into alternatives. Outcome Relative d-efficiency was used to measure the optimality of each DCE design. Results DCE design complexity influenced statistical efficiency. Across all designs, relative d-efficiency decreased as the number of attributes and attribute levels increased. It increased for designs with more alternatives. Lastly, relative d-efficiency converges as the number of choice tasks increases, where convergence may not be at 100% statistical optimality. Conclusions Achieving 100% d-efficiency is heavily dependent on the number of attributes, attribute levels, choice tasks and alternatives. Further exploration of overlaps and block sizes are needed. This study's results are widely applicable for researchers interested in creating optimal DCE designs to elicit individual preferences on health services, programmes, policies and products. PMID:27436671

Mentoring Alternative Certification Teachers: Implementing an Online Collaborative Consultation Community

ERIC Educational Resources Information Center

Dukes, Lyman, III; Jones, Brett D.

2007-01-01

Online discussion boards have the potential to provide significant support to beginning teachers; thus, we designed an online collaborative consultation community to provide mentor support to university students enrolled in an alternative certification program. The results suggest that although students in alternative certification programs will…

Alternative Routes for Teacher Certification.

ERIC Educational Resources Information Center

Education Commission of the States, Denver, CO.

This publication presents a series of charts, designed for quick reference, which describe the status of alternative teacher certification routes in each of the 50 states. The charts were prepared in response to an increasing number of inquiries from educators, policy makers, and the public. Information was gathered by telephone surveys of state…

Alternative Work Schedules: Designing Compatible Work Systems

ERIC Educational Resources Information Center

Steen, Pamela L.

1977-01-01

Attempts to improve the quality of working life through changes in environmental factors, such as flexible hours, are likely to bring limited and short-term advantages unless the work process itself is well-designed and compatible with the environmental changes. (Author/LBH)

Technology Learning Activities. Design Brief--Measuring Inaccessible Distances. Alternative Energy Sources: Designing a Wind Powered Generator. Alternative Energy Sources: Designing a Hot Dog Heater Using Solar Energy.

ERIC Educational Resources Information Center

Technology Teacher, 1991

1991-01-01

These three learning activities are on measuring accessible distances, designing a wind powered generator, and designing a hot dog heater using solar energy. Each activity includes description of context, objectives, list of materials and equipment, challenge to students, and evaluation questions. (SK)

Treating youths with selective mutism with an alternating design of exposure-based practice and contingency management.

PubMed

Vecchio, Jennifer; Kearney, Christopher A

2009-12-01

Selective mutism is a severe childhood disorder involving failure to speak in public situations in which speaking is expected. The present study examined 9 youths with selective mutism treated with child-focused, exposure-based practices and parent-focused contingency management via an alternating treatments design. Broadband measures of functioning were employed, but particular focus was made on behavioral assessment of words spoken audibly and daily in public situations. Treatment ranged from 8 to 32 sessions and resulted in positive end-state functioning for 8 of 9 participants. Broader analyses indicated greater effectiveness for exposure-based practice than contingency management. The results support recent case reports of behavioral treatment for this population but in more rigorous fashion. Clinical and research challenges are discussed, including caveats about length and intensity of treatment for this population and need to develop standardized daily measures.

Alternative financial institutions? Sustainability, development, social reproduction, and gender analysis.

PubMed

Kidder, T

1999-08-01

This paper proposes a conceptual framework for alternative financial institutions in Nicaragua. The article includes a discussion on innovative services and policies, which differentiate CARUNA (National Savings and Credit Cooperative ¿Caja Rural¿), and other financial institutions from conventional banks. It further examines theories that have altered the way development practitioners think about the economy, poverty reduction, and the positions of men and women in the society. These theories are the feminist economic theory and alternative development theories. Specific ways to incorporate the concepts of alternative and feminist economic theories in the design of financial institutions include open credit, savings, and remittance mechanisms, and coordinating councils. The gender analysis approach was used to evaluate the design of financial institutions.

Radiation dose and image quality of X-ray volume imaging systems: cone-beam computed tomography, digital subtraction angiography and digital fluoroscopy.

PubMed

Paul, Jijo; Jacobi, Volkmar; Farhang, Mohammad; Bazrafshan, Babak; Vogl, Thomas J; Mbalisike, Emmanuel C

2013-06-01

Radiation dose and image quality estimation of three X-ray volume imaging (XVI) systems. A total of 126 patients were examined using three XVI systems (groups 1-3) and their data were retrospectively analysed from 2007 to 2012. Each group consisted of 42 patients and each patient was examined using cone-beam computed tomography (CBCT), digital subtraction angiography (DSA) and digital fluoroscopy (DF). Dose parameters such as dose-area product (DAP), skin entry dose (SED) and image quality parameters such as Hounsfield unit (HU), noise, signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were estimated and compared using appropriate statistical tests. Mean DAP and SED were lower in recent XVI than its previous counterparts in CBCT, DSA and DF. HU of all measured locations was non-significant between the groups except the hepatic artery. Noise showed significant difference among groups (P < 0.05). Regarding CNR and SNR, the recent XVI showed a higher and significant difference compared to its previous versions. Qualitatively, CBCT showed significance between versions unlike the DSA and DF which showed non-significance. A reduction of radiation dose was obtained for the recent-generation XVI system in CBCT, DSA and DF. Image noise was significantly lower; SNR and CNR were higher than in previous versions. The technological advancements and the reduction in the number of frames led to a significant dose reduction and improved image quality with the recent-generation XVI system. • X-ray volume imaging (XVI) systems are increasingly used for interventional radiological procedures. • More modern XVI systems use lower radiation doses compared with earlier counterparts. • Furthermore more modern XVI systems provide higher image quality. • Technological advances reduce radiation dose and improve image quality.

40 CFR 74.20 - Data for baseline and alternative baseline.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Data for baseline and alternative... PROGRAMS (CONTINUED) SULFUR DIOXIDE OPT-INS Allowance Calculations for Combustion Sources § 74.20 Data for baseline and alternative baseline. (a) Acceptable data. (1) The designated representative of a combustion...

LCA to choose among alternative design solutions: the case study of a new Italian incineration line.

PubMed

Scipioni, A; Mazzi, A; Niero, M; Boatto, T

2009-09-01

At international level LCA is being increasingly used to objectively evaluate the performances of different Municipal Solid Waste (MSW) management solutions. One of the more important waste management options concerns MSW incineration. LCA is usually applied to existing incineration plants. In this study LCA methodology was applied to a new Italian incineration line, to facilitate the prediction, during the design phase, of its potential environmental impacts in terms of damage to human health, ecosystem quality and consumption of resources. The aim of the study was to analyse three different design alternatives: an incineration system with dry flue gas cleaning (without- and with-energy recovery) and one with wet flue gas cleaning. The last two technological solutions both incorporating facilities for energy recovery were compared. From the results of the study, the system with energy recovery and dry flue gas cleaning revealed lower environmental impacts in relation to the ecosystem quality. As LCA results are greatly affected by uncertainties of different types, the second part of the work provides for an uncertainty analysis aimed at detecting the extent output data from life cycle analysis are influenced by uncertainty of input data, and employs both qualitative (pedigree matrix) and quantitative methods (Monte Carlo analysis).

Alternate nozzle ablative materials program

NASA Technical Reports Server (NTRS)

Kimmel, N. A.

1984-01-01

Four subscale solid rocket motor tests were conducted successfully to evaluate alternate nozzle liner, insulation, and exit cone structural overwrap components for possible application to the Space Shuttle Solid Rocket Motor (SRM) nozzle asasembly. The 10,000 lb propellant motor tests were simulated, as close as practical, the configuration and operational environment of the full scale SRM. Fifteen PAN based and three pitch based materials had no filler in the phenolic resin, four PAN based materials had carbon microballoons in the resin, and the rest of the materials had carbon powder in the resin. Three nozzle insulation materials were evaluated; an aluminum oxide silicon oxide ceramic fiber mat phenolic material with no resin filler and two E-glass fiber mat phenolic materials with no resin filler. It was concluded by MTI/WD (the fabricator and evaluator of the test nozzles) and NASA-MSFC that it was possible to design an alternate material full scale SRM nozzle assembly, which could provide an estimated 360 lb increased payload capability for Space Shuttle launches over that obtainable with the current qualified SRM design.

Advancing Alternative Analysis: Integration of Decision Science.

PubMed

Malloy, Timothy F; Zaunbrecher, Virginia M; Batteate, Christina M; Blake, Ann; Carroll, William F; Corbett, Charles J; Hansen, Steffen Foss; Lempert, Robert J; Linkov, Igor; McFadden, Roger; Moran, Kelly D; Olivetti, Elsa; Ostrom, Nancy K; Romero, Michelle; Schoenung, Julie M; Seager, Thomas P; Sinsheimer, Peter; Thayer, Kristina A

2017-06-13

Decision analysis-a systematic approach to solving complex problems-offers tools and frameworks to support decision making that are increasingly being applied to environmental challenges. Alternatives analysis is a method used in regulation and product design to identify, compare, and evaluate the safety and viability of potential substitutes for hazardous chemicals. We assessed whether decision science may assist the alternatives analysis decision maker in comparing alternatives across a range of metrics. A workshop was convened that included representatives from government, academia, business, and civil society and included experts in toxicology, decision science, alternatives assessment, engineering, and law and policy. Participants were divided into two groups and were prompted with targeted questions. Throughout the workshop, the groups periodically came together in plenary sessions to reflect on other groups' findings. We concluded that the further incorporation of decision science into alternatives analysis would advance the ability of companies and regulators to select alternatives to harmful ingredients and would also advance the science of decision analysis. We advance four recommendations: a ) engaging the systematic development and evaluation of decision approaches and tools; b ) using case studies to advance the integration of decision analysis into alternatives analysis; c ) supporting transdisciplinary research; and d ) supporting education and outreach efforts. https://doi.org/10.1289/EHP483.

An economic analysis of alternative paving materials

NASA Astrophysics Data System (ADS)

Mustain, J. L.

1982-12-01

The purpose of this paper is to present a means for economic analysis of alternative equivalent pavement designs, considering such factors as initial construction cost, annual maintenance cost, salvage value and the various intangibles which occur during the analysis period. Having established a means of economic comparison, it is then the intent of this paper to show that Portland Cement Concrete has been and is a viable pavement alternative and ought to receive due consideration in the military construction program.

7 CFR 925.27 - Alternate members.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Alternate members. 925.27 Section 925.27 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE GRAPES GROWN IN A DESIGNATED AREA OF...

7 CFR 925.27 - Alternate members.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Alternate members. 925.27 Section 925.27 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE GRAPES GROWN IN A DESIGNATED AREA OF...

7 CFR 925.27 - Alternate members.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Alternate members. 925.27 Section 925.27 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE GRAPES GROWN IN A DESIGNATED AREA OF...

7 CFR 925.27 - Alternate members.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Alternate members. 925.27 Section 925.27 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; FRUITS, VEGETABLES, NUTS), DEPARTMENT OF AGRICULTURE GRAPES GROWN IN A DESIGNATED AREA OF...

7 CFR 925.27 - Alternate members.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Alternate members. 925.27 Section 925.27 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE GRAPES GROWN IN A DESIGNATED AREA OF...

Alternative approaches to analytical designs in occupational injury epidemiology.

PubMed

Mittleman, M A; Maldonado, G; Gerberich, S G; Smith, G S; Sorock, G S

1997-08-01

In this paper, we discuss the theoretical framework upon which observational studies of occupational injuries are based. Following a general description of how causal effects are estimated, the challenges faced by researchers working in this area are outlined, with an emphasis on case-control studies. These challenges include defining the at-risk period for workers whose tasks change over time and whose hazard period may be very brief, evaluating the underreporting of both exposures and injuries, and considering the effects of multiple injuries per individual on study design and data analysis. We review both the theoretical and practical considerations in the design and conduct of traditional case-control studies, based on the collection of individual level data, as well as other approaches, such as using information culled from administrative and descriptive databases, and case-control studies in which the plant or work site is the unit of analysis. The case-crossover design is also reviewed and its utility for reducing confounding due to differences between individuals by self-matching is highlighted. While this design has not yet been applied to the work setting, its potential for increasing our understanding of the causes of acute-onset occupational injuries seems promising. Finally, a variety of hybrid designs are discussed, including combinations of case-control, case-crossover, and cohort designs.

Development and field testing of an alternative latrine design utilizing basic oxygen furnace slag as a treatment media for pathogen removal

NASA Astrophysics Data System (ADS)

Stimson, J.; Suhogusoff, A. V.; Blowes, D. W.; Hirata, R. A.; Ptacek, C. J.; Robertson, W. D.; Emelko, M. B.

2009-05-01

In densely-populated communities in developing countries, appropriate setback distances for pit latrines often cannot be met. An alternative latrine was designed that incorporates two permeable reactive media to treat pathogens and nitrate from effluent. Basic oxygen furnace (BOF) slag in contact with wastewater effluent elevates pH to levels (> 11) that inactivate pathogens. Saturated woodchip creates reducing conditions that encourage the growth of denitrifying bacteria which remove NO3-. The field application was constructed in Santo Antônio, a peri-urban community located 25 km south of the city of São Paulo, Brazil. A 2-m diameter pit was excavated to a depth of 4 m into the sandy-clay unsaturated zone. A geotextile liner was emplaced to create saturated conditions in the 0.5-m thick woodchip barrier. Above the woodchip barrier, a 1-m thick layer of BOF slag mixed with pea gravel and sand was emplaced. A series of filter layers, grading upward from coarse sand to fine gravel, where placed above the BOF layer, and gravel was also infilled around the outer perimeter of the excavation, to ensure O2 diffusion into the design, the formation of biofilm, and degradation of organic material. A control latrine, constructed with similar hydraulic characteristics and nonreactive materials, was constructed at a locality 100 m away, in the same geological materials. Total coliform, thermotolerant coliform, and E. coli are removed by approximately 4-5 log concentration units in less than one meter of vertical transport through the BOF slag media. In the control latrine, comparable reductions in these pathogenic indicators are observed over three meters of vertical transport. Removal of sulphur-reducing Clostridia, Clostridium perfrigens and somatic coliphage are also achieved in the alternative design, but initial concentrations in effluent are low. Some measurable concentrations of pathogen indicators are measured in lysimeters below the BOF layer, but are associated

Alternative Schools and Area Learning Centers. 1998 Minnesota Student Survey.

ERIC Educational Resources Information Center

Fulkerson, Jayne A.; Harrison, Patricia A.; Hedger, Scott A.

This report highlights findings from the 1998 Minnesota Student Survey, administered to 3,791 voluntary participants, comparing students in alternative school settings with those in public schools. Alternative schools and area learning centers are high school diploma granting programs designed for students who are behind in their work, have…

AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT XVII, LEARNING ABOUT AC GENERATOR (ALTERNATOR) PRINCIPLES (PART II).

ERIC Educational Resources Information Center

Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATING PRINCIPLES AND THE SERVICING AND TESTING PROCEDURES FOR ALTERNATING CURRENT (AC) GENERATORS AND REGULATORS USED ON DIESEL POWERED EQUIPMENT. TOPICS ARE REVIEW OF ALTERNATOR PRINCIPLES, ALTERNATOR SERVICING AND TESTING, ALTERNATOR REGULATOR OPERATING…

100-KE REACTOR CORE REMOVAL PROJECT ALTERNATIVE ANALYSIS WORKSHOP REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

HARRINGTON RA

2010-01-15

On December 15-16, 2009, a 100-KE Reactor Core Removal Project Alternative Analysis Workshop was conducted at the Washington State University Consolidated Information Center, Room 214. Colburn Kennedy, Project Director, CH2M HILL Plateau Remediation Company (CHPRC) requested the workshop and Richard Harrington provided facilitation. The purpose of the session was to select the preferred Bio Shield Alternative, for integration with the Thermal Shield and Core Removal and develop the path forward to proceed with project delivery. Prior to this workshop, the S.A. Robotics (SAR) Obstruction Removal Alternatives Analysis (565-DLV-062) report was issued, for use prior to and throughout the session, tomore » all the team members. The multidisciplinary team consisted ofrepresentatives from 100-KE Project Management, Engineering, Radcon, Nuclear Safety, Fire Protection, Crane/Rigging, SAR Project Engineering, the Department of Energy Richland Field Office, Environmental Protection Agency, Washington State Department of Ecology, Defense Nuclear Facility Safety Board, and Deactivation and Decommission subject matter experts from corporate CH2M HILL and Lucas. Appendix D contains the workshop agenda, guidelines and expectations, opening remarks, and attendance roster going into followed throughout the workshop. The team was successful in selecting the preferred alternative and developing an eight-point path forward action plan to proceed with conceptual design. Conventional Demolition was selected as the preferred alternative over two other alternatives: Diamond Wire with Options, and Harmonic Delamination with Conventional Demolition. The teams preferred alternative aligned with the SAR Obstruction Removal Alternative Analysis report conclusion. However, the team identified several Path Forward actions, in Appendix A, which upon completion will solidify and potentially enhance the Conventional Demolition alternative with multiple options and approaches to achieve project

Study of alternate space shuttle concepts

NASA Technical Reports Server (NTRS)

1971-01-01

A study of alternate space shuttle concepts was conducted to examine the stage-and-one-half concept and its potential for later conversion and use in the two stage reusable shuttle system. A study of external hydrogen tank concepts was conducted to determine the issues involved in the design and production of a low-cost expendable tank system. The major objectives of the study were to determine: (1) realistic drop tank program cost estimates, (2) estimated drop tank program cost for selected specific designs, and (3) change in program cost due to variations in design and manufacturing concepts and changes in program assumptions.

Alternative Fuels Data Center: Test Your Alternative Fuel IQ

Science.gov Websites

Test Your Alternative Fuel IQ to someone by E-mail Share Alternative Fuels Data Center: Test Your Alternative Fuel IQ on Facebook Tweet about Alternative Fuels Data Center: Test Your Alternative Fuel IQ on Twitter Bookmark Alternative Fuels Data Center: Test Your Alternative Fuel IQ on Google Bookmark

Test Results from a High Power Linear Alternator Test Rig

NASA Technical Reports Server (NTRS)

Birchenough, Arthur G.; Hervol, David S.; Gardner, Brent G.

2010-01-01

Stirling cycle power conversion is an enabling technology that provides high thermodynamic efficiency but also presents unique challenges with regard to electrical power generation, management, and distribution. The High Power Linear Alternator Test Rig (HPLATR) located at the NASA Glenn Research Center (GRC) in Cleveland, OH is a demonstration test bed that simulates electrical power generation from a Stirling engine driven alternator. It implements the high power electronics necessary to provide a well regulated DC user load bus. These power electronics use a novel design solution that includes active rectification and power factor control, active ripple suppression, along with a unique building block approach that permits the use of high voltage or high current alternator designs. This presentation describes the HPLATR, the test program, and the operational results.

Test Results From a High Power Linear Alternator Test Rig

NASA Technical Reports Server (NTRS)

Birchenough, Arthur G.; Hervol, David S.; Gardner, Brent G.

2010-01-01

Stirling cycle power conversion is an enabling technology that provides high thermodynamic efficiency but also presents unique challenges with regard to electrical power generation, management, and distribution. The High Power Linear Alternator Test Rig (HPLATR) located at the NASA Glenn Research Center (GRC) in Cleveland, Ohio is a demonstration test bed that simulates electrical power generation from a Stirling engine driven alternator. It implements the high power electronics necessary to provide a well regulated DC user load bus. These power electronics use a novel design solution that includes active rectification and power factor control, active ripple suppression, along with a unique building block approach that permits the use of high voltage or high current alternator designs. This report describes the HPLATR, the test program, and the operational results.

Consideration of alternative designs for a Percutaneous Endoscopic Gastrostomy feeding tube

NASA Astrophysics Data System (ADS)

Yerrabolu, Santosh Rohit

The inability of some people to chew or swallow foods (but can digest foods) due to problems associated with various diseases and complications leads them to insufficient nutritional intake and loss of quality of life. These individuals are generally provided with nutritional support by means of injecting or infusing food directly into their stomachs or small intestines via feeding tubes. Gastrostomy feeding tubes (G-tubes) are used when such nutritional support is required for over 3-6 weeks. Percutaneous Endoscopic Gastrostomy (PEG) tubes are one of the most widely used G- Tubes and devices which are inserted via an incision through the abdominal wall either through a pull or push method. This investigation proposes conceptual alternative Percutaneous Endoscopy Gastrostomy (PEG) feeding tube designs with optimized materials selection to be used for their construction. The candidate materials were chosen from 18 commercial catheters, 2 reference grade polymers and a commercial polymer; using tissue-catheter-friction testing and surface chemistry characterization (Infrared spectroscopy and Critical Surface Tension approximation). The main objectives considered were to minimize slipping/dislodgement of gastrostomy tube/seal, to reduce peristomal leakage, and to attain size variability of PEG tubes while maintaining a low profile. Scanning Electron Microscope- Energy Dispersive X-ray Spectroscopy was employed to further determine the filler materials used in the samples. Nylon coated with fatty ester and filled with Barium sulphate was determined as the optimum material for the construction of the tube part of the feeding tubes to reduce slipping/dislodgment of gastrostomy tube/seal and to minimize peristomal leakage. Nylon coated with fatty ester and filled with Silica is the suggested as a candidate material for construction of the bumper/mushroom sections of the feeding tubes to avoid the Buried Bumper Syndrome. Fused Deposition Modeling, Selective Laser Sintering

Simulation study to determine the impact of different design features on design efficiency in discrete choice experiments.

PubMed

Vanniyasingam, Thuva; Cunningham, Charles E; Foster, Gary; Thabane, Lehana

2016-07-19

Discrete choice experiments (DCEs) are routinely used to elicit patient preferences to improve health outcomes and healthcare services. While many fractional factorial designs can be created, some are more statistically optimal than others. The objective of this simulation study was to investigate how varying the number of (1) attributes, (2) levels within attributes, (3) alternatives and (4) choice tasks per survey will improve or compromise the statistical efficiency of an experimental design. A total of 3204 DCE designs were created to assess how relative design efficiency (d-efficiency) is influenced by varying the number of choice tasks (2-20), alternatives (2-5), attributes (2-20) and attribute levels (2-5) of a design. Choice tasks were created by randomly allocating attribute and attribute level combinations into alternatives. Relative d-efficiency was used to measure the optimality of each DCE design. DCE design complexity influenced statistical efficiency. Across all designs, relative d-efficiency decreased as the number of attributes and attribute levels increased. It increased for designs with more alternatives. Lastly, relative d-efficiency converges as the number of choice tasks increases, where convergence may not be at 100% statistical optimality. Achieving 100% d-efficiency is heavily dependent on the number of attributes, attribute levels, choice tasks and alternatives. Further exploration of overlaps and block sizes are needed. This study's results are widely applicable for researchers interested in creating optimal DCE designs to elicit individual preferences on health services, programmes, policies and products. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Using Design Capability Indices to Satisfy Ranged Sets of Design Requirements

NASA Technical Reports Server (NTRS)

Chen, Wei; Allen, Janet K.; Simpson, Timothy W.; Mistree, Farrokh

1996-01-01

For robust design it is desirable to allow the design requirements to vary within a certain range rather than setting point targets. This is particularly important during the early stages of design when little is known about the system and its requirements. Toward this end, design capability indices are developed in this paper to assess the capability of a family of designs, represented by a range of top-level design specifications, to satisfy a ranged set of design requirements. Design capability indices are based on process capability indices from statistical process control and provide a single objective, alternate approach to the use of Taguchi's signal-to- noise ratio which is often used for robust design. Successful implementation of design capability indices ensures that a family of designs conforms to a given ranged set of design requirements. To demonstrate an application and the usefulness of design capability indices, the design of a solar powered irrigation system is presented. Our focus in this paper is on the development and implementation of design capability indices as an alternate approach to the use of the signal-to-noise ratio and not on the results of the example problem, per se.

The Development of Mini Portable Digester Designs for Domestic and Restaurant Solid Waste Processing to be Clean Biogas as Energy's Alternative to Replace LPG

NASA Astrophysics Data System (ADS)

Mansur, A.; Janari dan, D.; Setiawan, N.

2016-02-01

Biofuel is developed as an alternative source of second generation energy that could be attained from organic waste. This research is purposed to create applicative and cheap Portable digester unit for society. The design concepts’ screening that was made under considerations of the experts is finally resumed. Design 1 with final weight score of 1, design 2 with final weight score of -1, design 3 with final weight score of 2, design 4 with final weight score 3, design 5 with final weight score of -1, design 6 with final weight score of 0. Accepted designs for further concept assessment are design 1, 2 and 6. The result of concept assessment applies weighting for the scoring. Design 1 resulting 2.67, design 2 results 2.15 while design 3 results 2.52. Design 1 is concluded as the design with biggest result, which is 2.67. Its specification is explained as follows: tank capacity of 60 liters, manual rotating crank pivot, tank's material is plastic with symbol 1, material of axle swivel arm is grey cast iron, 2 mm rotary blades with hole. The experiment 1 contained 23.78% methane and 13.65 carbon dioxide that resulted from content test.

Innovative IPV from attenuated Sabin poliovirus or newly designed alternative seed strains.

PubMed

Hamidi, Ahd; Bakker, Wilfried A M

2012-11-01

This article gives an overview of the patent literature related to innovative inactivated polio vaccine (i-IPV) based on using Sabin poliovirus strains and newly developed alternative recombinant poliovirus strains. This innovative approach for IPV manufacturing is considered to attribute to the requirement for affordable IPV in the post-polio-eradication era, which is on the horizon. Although IPV is a well-established vaccine, the number of patent applications in this field was seen to have significantly increased in the past decade. Currently, regular IPV appears to be too expensive for universal use. Future affordability may be achieved by using alternative cell lines, alternative virus seed strains, improved and optimized processes, dose sparing, or the use of adjuvants. A relatively short-term option to achieve cost-price reduction is to work on regular IPV, using wild-type poliovirus strains, or on Sabin-IPV, based on using attenuated poliovirus strains. This price reduction can be achieved by introducing efficiency in processing. There are also multiple opportunities to work on dose sparing, for example, by using adjuvants or fractional doses. Renewed interest in this field was clearly reflected in the number and diversity of patent applications. In a later stage, several innovative approaches may become even more attractive, for example the use of recombinant virus strains or even a totally synthetic vaccine. Currently, such work is mainly carried out by research institutes and universities and therefore clinical data are not available.

Alternative security

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weston, B.H.

This book contains the following chapters: The Military and Alternative Security: New Missions for Stable Conventional Security; Technology and Alternative Security: A Cherished Myth Expires; Law and Alternative Security: Toward a Just World Peace; Politics and Alternative Security: Toward a More Democratic, Therefore More Peaceful, World; Economics and Alternative Security: Toward a Peacekeeping International Economy; Psychology and Alternative Security: Needs, Perceptions, and Misperceptions; Religion and Alternative Security: A Prophetic Vision; and Toward Post-Nuclear Global Security: An Overview.

Hanson Russian River Ponds floodplain restoration: Feasibility study and conceptual design; Appendix G: Physical evaluation of the restoration alternatives

USGS Publications Warehouse

McDonald, Richard R.; Nelson, Jonathan M.

2016-01-01

Appendix G: Hanson Russian River Ponds Floodplain Restoration: Feasibility Study and Conceptual Design |G-1Appendix GPhysical Evaluation of the Restoration AlternativesRichard McDonald and Jonathan Nelson, PhDU.S. Geological Survey Geomorphology and Sediment Transport Laboratory, Golden, ColoradoIntroductionTo assess the relative and overall impacts of the scenarios proposed in Chapters 7 and 9,(Stage I-A–I-D and Stage II-A –II-E), each of the topographic configurations were evaluated over a range of flows. Thisevaluation was carried out using computational flow modeling tools available in the iRIC public-domain river modeling interface (www.i-ric.org, Nelsonet al.in press). Using the iRIC modeling tools described in more detail below, basic hydraulic computations of water-surface elevation, velocity, shear stress, and other hydraulic variables were carried out for the alternatives in the reach surrounding the project area, from the confluence of Dry Creek upstream to the Wohler road bridge downstream, for the full range of observed flows. This methodology allows comparison of the current channel configuration with the proposed alternatives in terms of inundation period and frequency, depth, water velocity, and other hydraulic information. By integrating this kind of information over the reach of interest and the flow record, critical metrics assessing the impacts of various topographic modifications can be compared to those same metrics for the existing condition or other modification scenarios. In addition, because the iRIC tools include predictions of sediment mobility, suspension of fines, and the potential evolution of the land surface in response to flow, these methods provide evaluation of sediment transport, stability of current and proposed surfaces, and evaluation of how these surfaces might evolve into the future. This hydraulic and sediment transport information is critically important for understanding theimpacts of various proposed alternatives on

Translating Vision into Design: A Method for Conceptual Design Development

NASA Technical Reports Server (NTRS)

Carpenter, Joyce E.

2003-01-01

One of the most challenging tasks for engineers is the definition of design solutions that will satisfy high-level strategic visions and objectives. Even more challenging is the need to demonstrate how a particular design solution supports the high-level vision. This paper describes a process and set of system engineering tools that have been used at the Johnson Space Center to analyze and decompose high-level objectives for future human missions into design requirements that can be used to develop alternative concepts for vehicles, habitats, and other systems. Analysis and design studies of alternative concepts and approaches are used to develop recommendations for strategic investments in research and technology that support the NASA Integrated Space Plan. In addition to a description of system engineering tools, this paper includes a discussion of collaborative design practices for human exploration mission architecture studies used at the Johnson Space Center.

Concept design and alternate arrangements of orbiter mid-deck habitability features

NASA Technical Reports Server (NTRS)

Church, R. A.; Ciciora, J. A.; Porter, K. L.; Stevenson, G. E.

1976-01-01

The evaluations and recommendations for habitability features in the space shuttle orbiter mid-deck are summarized. The orbiter mission plans, the mid-deck dimensions and baseline arrangements along with crew compliments and typical activities were defined. Female and male anthropometric data based on zero-g operations were also defined. Evaluations of baseline and alternate feasible concepts provided several recommendations which are discussed.

Topology Optimization of an Aircraft Wing

DTIC Science & Technology

2015-06-11

Fraction VWT Virtual Wind Tunnel xvi TOPOLOGY OPTIMIZATION OF AN AIRCRAFT WING I. Introduction 1.1 Background Current aircraft wing design , which...ware in order to optimize the design of individual spars and wing-box structures for large commercial aircraft . They considered a hybrid global/local...weight in an aircraft by eliminating unnecessary material. An optimized approach has the potential to streamline the design process by allowing a

Generation of Alternative Assessment Scores using TEST and online data sources

EPA Science Inventory

Alternatives assessment frameworks such as DfE (Design for the Environment) evaluate chemical alternatives in terms of human health effects, ecotoxicity, and fate. T.E.S.T. (Toxicity Estimation Software Tool) can be utilized to evaluate human health in terms of acute oral rat tox...

ALTERNATIVE ENERGY SOURCES FOR WASTEWATER TREATMENT PLANTS

EPA Science Inventory

The technology assessment provides an introduction to the use of several alternative energy sources at wastewater treatment plants. The report contains fact sheets (technical descriptions) and data sheets (cost and design information) for the technologies. Cost figures and schema...

Advancing Alternative Analysis: Integration of Decision Science

PubMed Central

Zaunbrecher, Virginia M.; Batteate, Christina M.; Blake, Ann; Carroll, William F.; Corbett, Charles J.; Hansen, Steffen Foss; Lempert, Robert J.; Linkov, Igor; McFadden, Roger; Moran, Kelly D.; Olivetti, Elsa; Ostrom, Nancy K.; Romero, Michelle; Schoenung, Julie M.; Seager, Thomas P.; Sinsheimer, Peter; Thayer, Kristina A.

2017-01-01

Background: Decision analysis—a systematic approach to solving complex problems—offers tools and frameworks to support decision making that are increasingly being applied to environmental challenges. Alternatives analysis is a method used in regulation and product design to identify, compare, and evaluate the safety and viability of potential substitutes for hazardous chemicals. Objectives: We assessed whether decision science may assist the alternatives analysis decision maker in comparing alternatives across a range of metrics. Methods: A workshop was convened that included representatives from government, academia, business, and civil society and included experts in toxicology, decision science, alternatives assessment, engineering, and law and policy. Participants were divided into two groups and were prompted with targeted questions. Throughout the workshop, the groups periodically came together in plenary sessions to reflect on other groups’ findings. Results: We concluded that the further incorporation of decision science into alternatives analysis would advance the ability of companies and regulators to select alternatives to harmful ingredients and would also advance the science of decision analysis. Conclusions: We advance four recommendations: a) engaging the systematic development and evaluation of decision approaches and tools; b) using case studies to advance the integration of decision analysis into alternatives analysis; c) supporting transdisciplinary research; and d) supporting education and outreach efforts. https://doi.org/10.1289/EHP483 PMID:28669940

Restricted mean survival time: an alternative to the hazard ratio for the design and analysis of randomized trials with a time-to-event outcome

PubMed Central

2013-01-01

Background Designs and analyses of clinical trials with a time-to-event outcome almost invariably rely on the hazard ratio to estimate the treatment effect and implicitly, therefore, on the proportional hazards assumption. However, the results of some recent trials indicate that there is no guarantee that the assumption will hold. Here, we describe the use of the restricted mean survival time as a possible alternative tool in the design and analysis of these trials. Methods The restricted mean is a measure of average survival from time 0 to a specified time point, and may be estimated as the area under the survival curve up to that point. We consider the design of such trials according to a wide range of possible survival distributions in the control and research arm(s). The distributions are conveniently defined as piecewise exponential distributions and can be specified through piecewise constant hazards and time-fixed or time-dependent hazard ratios. Such designs can embody proportional or non-proportional hazards of the treatment effect. Results We demonstrate the use of restricted mean survival time and a test of the difference in restricted means as an alternative measure of treatment effect. We support the approach through the results of simulation studies and in real examples from several cancer trials. We illustrate the required sample size under proportional and non-proportional hazards, also the significance level and power of the proposed test. Values are compared with those from the standard approach which utilizes the logrank test. Conclusions We conclude that the hazard ratio cannot be recommended as a general measure of the treatment effect in a randomized controlled trial, nor is it always appropriate when designing a trial. Restricted mean survival time may provide a practical way forward and deserves greater attention. PMID:24314264

A decision tool for selecting trench cap designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paige, G.B.; Stone, J.J.; Lane, L.J.

1995-12-31

A computer based prototype decision support system (PDSS) is being developed to assist the risk manager in selecting an appropriate trench cap design for waste disposal sites. The selection of the {open_quote}best{close_quote} design among feasible alternatives requires consideration of multiple and often conflicting objectives. The methodology used in the selection process consists of: selecting and parameterizing decision variables using data, simulation models, or expert opinion; selecting feasible trench cap design alternatives; ordering the decision variables and ranking the design alternatives. The decision model is based on multi-objective decision theory and uses a unique approach to order the decision variables andmore » rank the design alternatives. Trench cap designs are evaluated based on federal regulations, hydrologic performance, cover stability and cost. Four trench cap designs, which were monitored for a four year period at Hill Air Force Base in Utah, are used to demonstrate the application of the PDSS and evaluate the results of the decision model. The results of the PDSS, using both data and simulations, illustrate the relative advantages of each of the cap designs and which cap is the {open_quotes}best{close_quotes} alternative for a given set of criteria and a particular importance order of those decision criteria.« less

Perspectives on Teaching from Alternative Certification Teachers from Diverse Backgrounds

ERIC Educational Resources Information Center

Evans, Brian R.

2014-01-01

This article presents an interview with five teachers in an alternative certification program at a university in New York. All of the teachers were from the New York City Teaching Fellows (NYCTF) program, which is an alternative certification program in New York designed to quickly place teachers in high need schools throughout the city. The…

Evaluation of Alternative Programs, 1982-83.

ERIC Educational Resources Information Center

Stolar, Maxine

In the 1982-83 school year, the Cincinnati Public Schools operated 21 alternative programs designed to provide specialized learning experiences along with the traditional academic curricula. Since balanced racial composition is a primary goal of these programs, applications are received from students regardless of where they reside in Cincinnati,…

Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2013-03-01

This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sears, Ted

2014-06-01

This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

Field evaluation of alternative and cost efficient bridge approach slabs.

DOT National Transportation Integrated Search

2013-11-01

Based on a recent study on cost efficient alternative bridge approach slab (BAS) designs (Thiagarajan et al. 2010) has recommended : three new BAS designs for possible implementation by MoDOT namely a) 20 feet cast-inplace slab with sleeper slab (CIP...

Description of the Prometheus Program Alternator/Thruster Integration Laboratory (ATIL)

NASA Technical Reports Server (NTRS)

Baez, Anastacio N.; Birchenough, Arthur G.; Lebron-Velilla, Ramon C.; Gonzalez, Marcelo C.

2005-01-01

The Project Prometheus Alternator Electric Thruster Integration Laboratory's (ATIL) primary two objectives are to obtain test data to influence the power conversion and electric propulsion systems design, and to assist in developing the primary power quality specifications prior to system Preliminary Design Review (PDR). ATIL is being developed in stages or configurations of increasing fidelity and complexity in order to support the various phases of the Prometheus program. ATIL provides a timely insight of the electrical interactions between a representative Permanent Magnet Generator, its associated control schemes, realistic electric system loads, and an operating electric propulsion thruster. The ATIL main elements are an electrically driven 100 kWe Alternator Test Unit (ATU), an alternator controller using parasitic loads, and a thruster Power Processing Unit (PPU) breadboard. This paper describes the ATIL components, its development approach, preliminary integration test results, and current status.

Alternative Format Preferences among Secondary School Visually Impaired Students in Nigeria

ERIC Educational Resources Information Center

Adetoro, 'Niran

2012-01-01

Persons with visual impairment have consistently shown a preference for one alternative reading format over another, often because of factors outside their control. This study adopted survey research design to investigate alternative format preferences among secondary school visually impaired students, focusing on Southwestern Nigeria. Using total…

Introduction to Computers: Parallel Alternative Strategies for Students. Course No. 0200000.

ERIC Educational Resources Information Center

Chauvenne, Sherry; And Others

Parallel Alternative Strategies for Students (PASS) is a content-centered package of alternative methods and materials designed to assist secondary teachers to meet the needs of mainstreamed learning-disabled and emotionally-handicapped students of various achievement levels in the basic education content courses. This supplementary text and…

A comprehensive safety assessment methodology for innovative geometric designs.

DOT National Transportation Integrated Search

2017-05-01

As the population grows and travel demands increase, alternative interchange designs have become increasingly popular. The diverging diamond interchange is an alternative design that has been implemented in the United States. This design can accommod...

ETF magnet design alternatives for the national MHD program

NASA Astrophysics Data System (ADS)

Marston, P. G.; Thome, R. J.; Dawson, A. M.; Bobrov, E. S.; Hatch, A. M.

1981-01-01

Five superconducting magnet designs are evaluated for a 200 MWe test facility requiring a magnet with an on-axis field of 6 T, an inlet bore area of 4 sq m, storing 6 x 10 to the 9th J. The designs include a straightforward rectangular saddle coil set, a 'Cask' configuration based on staves and corner blocks as the main support structure, and an internally cooled, cabled superconductor to minimize the substructure and eliminate the helium vessel. Also, a modular design using six coils with individual helium vessels and an integrated structure produces a simplest configuration which utilizes a natural rectangular interface for packaging the MHD channel and its connections, and results in a lower capital cost.

EDITORIAL: Special issue: CAMOP MOLEC XVI

NASA Astrophysics Data System (ADS)

Ascenzi, Daniela; Franceschi, Pietro; Tosi, Paolo

2007-09-01

In this special issue of CAMOP/Physica Scripta we would like to present a picture of the state-of-the-art in the field of the dynamics of molecular systems. It contains a collection of papers submitted in association with the most recent MOLEC meeting (MOLEC XVI), which was held in September 2006 in Levico Terme (Italy) to celebrate the 30th anniversary of the MOLEC conference series. The series of biennial European Conferences on the Dynamics of Molecular Systems (MOLEC) started in 1976, when the first meeting was held in Trento (Italy). Successive conferences were organized in Brandbjerg Højskole (Denmark, 1978), Oxford (UK, 1980), Nijmegen (The Netherlands, 1982), Jerusalem (Israel, 1984), Aussois (France, 1986), Assisi (Italy, 1988), Bernkastel-Kues (Germany, 1990), Prague (Czech Republic, 1992), Salamanca (Spain, 1994), Nyborg Strand (Denmark, 1996), Bristol (UK, 1998), Jerusalem (Israel, 2000), Istanbul (Turkey, 2002) and Nunspeet (The Netherlands, 2004). This is the second time that Physica Scripta has hosted a special issue dedicated to MOLEC. The previous issue ( Physica Scripta (2006) 73 C1-C89) was edited by Steven Stolte and Harold Linnartz following the MOLEC 2004 conference. Following the philosophy of CAMOP, we have asked invited speakers to summarize important problems in their research area, with the objective of setting forth the current thinking of leading researchers in atomic, molecular and optical physics. This comprises discussions of open questions, important new applications, new theoretical and experimental approaches and also predictions of where the field is heading. In addition to being authoritative contributions of acknowledged experts, we hope that the papers also appeal to non-specialists as each work contains a clear and broad introduction and references to the accessible literature. The present special issue comprises 17 papers, which are arranged according to the following topics: theoretical and experimental studies of

Alternative and cost-effective bridge approach slabs.

DOT National Transportation Integrated Search

2010-10-01

The primary objectives of the proposed project are to investigate the causes for any bumps at the end of the bridge approach slab : and to develop remedial measures or alternative designs for a replacement. It is clear that the problem stems from geo...

Alternative Fuels Data Center: Johnson Space Center Explores Alternative

Science.gov Websites

Fuel Vehicles Johnson Space Center Explores Alternative Fuel Vehicles to someone by E-mail Share Alternative Fuels Data Center: Johnson Space Center Explores Alternative Fuel Vehicles on Facebook Tweet about Alternative Fuels Data Center: Johnson Space Center Explores Alternative Fuel Vehicles on

Design knowledge capture for a corporate memory facility

NASA Technical Reports Server (NTRS)

Boose, John H.; Shema, David B.; Bradshaw, Jeffrey M.

1990-01-01

Currently, much of the information regarding decision alternatives and trade-offs made in the course of a major program development effort is not represented or retained in a way that permits computer-based reasoning over the life cycle of the program. The loss of this information results in problems in tracing design alternatives to requirements, in assessing the impact of change in requirements, and in configuration management. To address these problems, the problem was studied of building an intelligent, active corporate memory facility which would provide for the capture of the requirements and standards of a program, analyze the design alternatives and trade-offs made over the program's lifetime, and examine relationships between requirements and design trade-offs. Early phases of the work have concentrated on design knowledge capture for the Space Station Freedom. Tools are demonstrated and extended which helps automate and document engineering trade studies, and another tool is being developed to help designers interactively explore design alternatives and constraints.

Alternative Fuels Data Center: Dimethyl Ether

Science.gov Websites

Hydrocarbon Biofuels Dimethyl Ether Dimethyl ether (DME) is a synthetically produced alternative to diesel for use in specially designed compression ignition diesel engines. Under normal atmospheric conditions ether has several fuel properties that make it attractive for use in diesel engines. It has a very high

A Collaborative, Alternative Teacher Certification Program.

ERIC Educational Resources Information Center

Securro, Samuel, Jr.; And Others

In the summer of 1986, three institutions (West Virginia State College, West Virigina College of Graduate Studies, and West Virgina Institute of Technology) consorted to design an alternative teacher certification program to attract and retain a qualified pool of mathematics and science teachers. Known as the Field-Based Training Program (FBTP),…

Chemical trends of the luminescence in wide band gap II 1-xMn xVI semimagnetic semiconductors

NASA Astrophysics Data System (ADS)

Benecke, C.; Busse, W.; Gumlich, H.-E.

1990-04-01

Time resolved emission and excitation spectroscopy is used to investigate the Mn correlated luminescence in wide band gap II-VI compounds, i.e. Zn 1-xMn xS, Cd 1-xMn xSe, Zn 1-xMn xTe and Cd 1-xMn xTe. Additional Information has been obtained with CdxZnyMnzTe( x+ y+ z=1) in checking the luminescence by variation of the ratio of the cations Cd and Zn. Generally speaking, at least two distinct emissions bands can be observed for each II 1- xMn xVI compound. One emissions band is attributed to the internal transition 4T 1(G)→ 6A 1(S) of the 3d 5 electron of the Mn 2+ on regular metal sites with energies of about ≈2 eV. The other emission band is found to occur in the near infrared range of about ≈1.3 eV. This emission band is tentatively interpreted as a transition of Mn 2+ ions on interstitial sites or in small Mn chalcogenide clusters, both interpretations assuming cubic symmetry. This model is supported by the existence of low energy excitation bands and by the great similarity of the shape of the two emission bands which lead to comparable Huang-Rhys factors and effective phonon energies. Also the established trend in the experimental data of the II-VI compounds under consideration confirm this interpretation. For both the IR and the yellow Mn 2+ center, the Racah parameters B and C and the crystal field parameter Dq are determined on the basis of experimental data. As a result, the energy of both the emission and the excitation bands is predominantly determined by the sorrounding anions. These bands shift to higher energies when the anions are changed in the fixed order: Te→Se→S. Regularly, there is also a spectral shift when Zn is replaced by Cd, which is smaller than the shift due to the variation of onions.

Design of internal support structures for an inflatable lunar habitat

NASA Technical Reports Server (NTRS)

Cameron, Elizabeth A.; Duston, John A.; Lee, David D.

1990-01-01

NASA has a long range goal of constructing a fully equipped, manned lunar outpost on the near side of the moon by the year 2015. The proposed outpost includes an inflatable lunar habitat to support crews during missions longer that 12 months. A design for the internal support structures of the inflatable habitat is presented. The design solution includes material selection, substructure design, assembly plan development, and concept scale model construction. Alternate designs and design solutions for each component of the design are discussed. Alternate materials include aluminum, titanium, and reinforced polymers. Vertical support alternates include column systems, truss systems, suspension systems, and lunar lander supports. Horizontal alternates include beams, trusses, floor/truss systems, and expandable trusses. Feasibility studies on each alternate showed that truss systems and expandable trusses were the most feasible candidates for conceptual design. The team based the designs on the properties of 7075 T73 aluminum. The substructure assembly plan, minimizes assembly time and allows crews to construct the habitat without the use of EVA suits. In addition to the design solutions, the report gives conclusions and recommendations for further study of the inflatable habitat design.

Alternative Fuels Data Center: Alternative Fuels Save Money in Indy

Science.gov Websites

Alternative Fuels Save Money in Indy to someone by E-mail Share Alternative Fuels Data Center : Alternative Fuels Save Money in Indy on Facebook Tweet about Alternative Fuels Data Center: Alternative Fuels Save Money in Indy on Twitter Bookmark Alternative Fuels Data Center: Alternative Fuels Save Money in

Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative

Science.gov Websites

Fuels in Its Fleet Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet to someone by E-mail Share Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative Fuels in Its Fleet on Facebook Tweet about Alternative Fuels Data Center: Blue Ridge Parkway Incorporates Alternative

Alternative Fuels Data Center: Alaska Transportation Data for Alternative

Science.gov Websites

Fuels and Vehicles Alaska Transportation Data for Alternative Fuels and Vehicles to someone by E-mail Share Alternative Fuels Data Center: Alaska Transportation Data for Alternative Fuels and Vehicles on Facebook Tweet about Alternative Fuels Data Center: Alaska Transportation Data for Alternative

Inside-in, alternative paradigms for sound spatialization

NASA Astrophysics Data System (ADS)

Bahn, Curtis; Moore, Stephan

2003-04-01

Arrays of widely spaced mono-directional loudspeakers (P.A.-style stereo configurations or ``outside-in'' surround-sound systems) have long provided the dominant paradigms for electronic sound diffusion. So prevalent are these models that alternatives have largely been ignored and electronic sound, regardless of musical aesthetic, has come to be inseparably associated with single-channel speakers, or headphones. We recognize the value of these familiar paradigms, but believe that electronic sound can and should have many alternative, idiosyncratic voices. Through the design and construction of unique sound diffusion structures, one can reinvent the nature of electronic sound; when allied with new sensor technologies, these structures offer alternative modes of interaction with techniques of sonic computation. This paper describes several recent applications of spherical speakers (multichannel, outward-radiating geodesic speaker arrays) and Sensor-Speaker-Arrays (SenSAs: combinations of various sensor devices with outward-radiating multi-channel speaker arrays). This presentation introduces the development of four generations of spherical speakers-over a hundred individual speakers of various configurations-and their use in many different musical situations including live performance, recording, and sound installation. We describe the design and construction of these systems, and, more generally, the new ``voices'' they give to electronic sound.

Automated solar collector installation design including ability to define heterogeneous design preferences

DOEpatents

Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

2014-04-29

Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre -defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives. Embodiments may also include definition of one or more design apertures, each of which may correspond to boundaries in which solar collector layouts should comply with distinct sets of user-defined design preferences. Distinct apertures may provide heterogeneous regions of collector layout according to the user-defined design preferences.

Automated solar collector installation design including ability to define heterogeneous design preferences

DOEpatents

Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

2013-01-08

Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre-defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives. Embodiments may also include definition of one or more design apertures, each of which may correspond to boundaries in which solar collector layouts should comply with distinct sets of user-defined design preferences. Distinct apertures may provide heterogeneous regions of collector layout according to the user-defined design preferences.

Minute Man National Historical Park : alternative transportation evaluation

DOT National Transportation Integrated Search

2005-05-29

This study examines issues relevant to the implementation of an alternative transportation system designed to facilitate the movement of visitors throughout the park and, potentially, to sites of historical and recreational interest located outside t...

The Positive Alternative Credit Experience (PACE) Program a Quantitative Comparative Study

ERIC Educational Resources Information Center

Warren, Rebecca Anne

2011-01-01

The purpose of this quantitative comparative study was to evaluate the Positive Alternative Credit Experience (PACE) Program using an objectives-oriented approach to a formative program evaluation. The PACE Program was a semester-long high school alternative education program designed to serve students at-risk for academic failure or dropping out…

Adapting Evaluations of Alternative Payment Models to a Changing Environment.

PubMed

Grannemann, Thomas W; Brown, Randall S

2018-04-01

To identify the most robust methods for evaluating alternative payment models (APMs) in the emerging health care delivery system environment. We assess the impact of widespread testing of alternative payment models on the ability to find credible comparison groups. We consider the applicability of factorial research designs for assessing the effects of these models. The widespread adoption of alternative payment models could effectively eliminate the possibility of comparing APM results with a "pure" control or comparison group unaffected by other interventions. In this new environment, factorial experiments have distinct advantages over the single-model experimental or quasi-experimental designs that have been the mainstay of recent tests of Medicare payment and delivery models. The best prospects for producing definitive evidence of the effects of payment incentives for APMs include fractional factorial experiments that systematically vary requirements and payment provisions within a payment model. © Health Research and Educational Trust.

Investigation of a 7-pole/6-slot Halbach-magnetized permanent-magnet linear alternator used for free-piston stirling engines

NASA Astrophysics Data System (ADS)

Zheng, Ping; Tong, Chengde; Zhao, Jing; Yu, Bin; Li, Lin; Bai, Jingang; Zhang, Lu

2012-04-01

This paper investigates a 7-pole/6-slot Halbach-magnetized permanent-magnet linear alternator used for free piston Stirling engines (FPSEs). Taking the advantages of Halbach array, a 1 kW prototype alternator is designed. Considering the rms value of electromotive force (EMF) and harmonic distortion, the optimal length ratio of the axial- and radial-magnetized permanent magnets and thicknesses of the permanent magnets are optimized by 2D finite element method. The alternator detent force, which is an important factor for smooth operation of FPSEs, is studied by optimizing slot tip and end tooth. The load and thermal performances of the final design are simulated. A prototype alternator was designed, built and tested. Experimental data indicated satisfactory design.

DESIGNING GREENER SOLVENTS

EPA Science Inventory

Computer-aided design of chemicals and chemical mixtures provides a powerful tool to help engineers identify cleaner process designs and more-benign alternatives to toxic industrial solvents. Three software programs are discussed: (1) PARIS II (Program for Assisting the Replaceme...

Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Brochure)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2014-06-01

This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Book)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2010-11-01

This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

Air transportation energy efficiency - Alternatives and implications

NASA Technical Reports Server (NTRS)

Williams, L. J.

1976-01-01

Results from recent studies of air transportation energy efficiency alternatives are discussed, along with some of the implications of these alternatives. The fuel-saving alternatives considered include aircraft operation, aircraft modification, derivative aircraft, and new aircraft. In the near-term, energy efficiency improvements should be possible through small improvements in fuel-saving flight procedures, higher density seating, and higher load factors. Additional small near-term improvements could be obtained through aircraft modifications, such as the relatively inexpensive drag reduction modifications. Derivatives of existing aircraft could meet the requirements for new aircraft and provide energy improvements until advanced technology is available to justify the cost of a completely new design. In order to obtain significant improvements in energy efficiency, new aircraft must truly exploit advanced technology in such areas as aerodynamics, composite structures, active controls, and advanced propulsion.

Alternatives to the Randomized Controlled Trial

PubMed Central

West, Stephen G.; Duan, Naihua; Pequegnat, Willo; Gaist, Paul; Des Jarlais, Don C.; Holtgrave, David; Szapocznik, José; Fishbein, Martin; Rapkin, Bruce; Clatts, Michael; Mullen, Patricia Dolan

2008-01-01

Public health researchers are addressing new research questions (e.g., effects of environmental tobacco smoke, Hurricane Katrina) for which the randomized controlled trial (RCT) may not be a feasible option. Drawing on the potential outcomes framework (Rubin Causal Model) and Campbellian perspectives, we consider alternative research designs that permit relatively strong causal inferences. In randomized encouragement designs, participants are randomly invited to participate in one of the treatment conditions, but are allowed to decide whether to receive treatment. In quantitative assignment designs, treatment is assigned on the basis of a quantitative measure (e.g., need, merit, risk). In observational studies, treatment assignment is unknown and presumed to be nonrandom. Major threats to the validity of each design and statistical strategies for mitigating those threats are presented. PMID:18556609

Alternative Fuels Data Center: About the Alternative Fuels Data Center

Science.gov Websites

About Printable Version Share this resource Send a link to Alternative Fuels Data Center: About the Alternative Fuels Data Center to someone by E-mail Share Alternative Fuels Data Center: About the Alternative Fuels Data Center on Facebook Tweet about Alternative Fuels Data Center: About the Alternative Fuels

Automated solar collector installation design

DOEpatents

Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

2014-08-26

Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre-defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives.

Fluorescent Protein-Based Quantification of Alternative Splicing of a Target Cassette Exon in Mammalian Cells.

PubMed

Gurskaya, N G; Staroverov, D B; Lukyanov, K A

2016-01-01

Alternative splicing is an important mechanism of regulation of gene expression and expansion of proteome complexity. Recently we developed a new fluorescence reporter for quantitative analysis of alternative splicing of a target cassette exon in live cells (Gurskaya et al., 2012). It consists of a specially designed minigene encoding red and green fluorescent proteins (Katushka and TagGFP2) and a fragment of the target gene between them. Skipping or inclusion of the alternative exon induces a frameshift; ie, alternative exon length must not be a multiple of 3. Finally, red and green fluorescence intensities of cells expressing this reporter are used to estimate the percentage of alternative (exon-skipped) and normal (exon-retained) transcripts. Here, we provide a detailed description of design and application of the fluorescence reporter of a target alternative exon splicing in mammalian cell lines. © 2016 Elsevier Inc. All rights reserved.

NOEC and LOEC as merely concessive expedients: two unambiguous alternatives and some criteria to maximize the efficiency of dose-response experimental designs.

PubMed

Murado, M A; Prieto, M A

2013-09-01

NOEC and LOEC (no and lowest observed effect concentrations, respectively) are toxicological concepts derived from analysis of variance (ANOVA), a not very sensitive method that produces ambiguous results and does not provide confidence intervals (CI) of its estimates. For a long time, despite the abundant criticism that such concepts have raised, the field of the ecotoxicology is reticent to abandon them (two possible reasons will be discussed), adducing the difficulty of clear alternatives. However, this work proves that a debugged dose-response (DR) modeling, through explicit algebraic equations, enables two simple options to accurately calculate the CI of substantially lower doses than NOEC. Both ANOVA and DR analyses are affected by the experimental error, response profile, number of observations and experimental design. The study of these effects--analytically complex and experimentally unfeasible--was carried out using systematic simulations with realistic data, including different error levels. Results revealed the weakness of NOEC and LOEC notions, confirmed the feasibility of the proposed alternatives and allowed to discuss the--often violated--conditions that minimize the CI of the parametric estimates from DR assays. In addition, a table was developed providing the experimental design that minimizes the parametric CI for a given set of working conditions. This makes possible to reduce the experimental effort and to avoid the inconclusive results that are frequently obtained from intuitive experimental plans. Copyright © 2013 Elsevier B.V. All rights reserved.

Effectiveness of Alternative Extension Methods through Radio Broadcasting in West Africa

ERIC Educational Resources Information Center

Moussa, Bokar; Otoo, Miriam; Fulton, Joan; Lowenberg-DeBoer, James

2011-01-01

There is an urgent need to quantify which extension methods are most effective in Africa. The objective of this study was to determine the impact of alternative extension methods on adoption of the triple bagging cowpea storage technology in Niger and Burkina Faso. This study was designed as a quasi-experiment with two alternative extension…

Factors Associated with Student Resilience: Perspectives of Graduates of Alternative Education Programs

ERIC Educational Resources Information Center

Zolkoski, Staci M.; Bullock, Lyndal M.; Gable, Robert A.

2016-01-01

Many students with emotional and behavioral disorders placed in alternative education settings lack resilience and are likely to experience failure in school and beyond without carefully designed intervention programs. Although researchers have examined both resilience in children and youth and their placement in alternative education settings,…

Manananggal - a novel viewer for alternative splicing events.

PubMed

Barann, Matthias; Zimmer, Ralf; Birzele, Fabian

2017-02-21

Alternative splicing is an important cellular mechanism that can be analyzed by RNA sequencing. However, identification of splicing events in an automated fashion is error-prone. Thus, further validation is required to select reliable instances of alternative splicing events (ASEs). There are only few tools specifically designed for interactive inspection of ASEs and available visualization approaches can be significantly improved. Here, we present Manananggal, an application specifically designed for the identification of splicing events in next generation sequencing data. Manananggal includes a web application for visual inspection and a command line tool that allows for ASE detection. We compare the sashimi plots available in the IGV Viewer, the DEXSeq splicing plots and SpliceSeq to the Manananggal interface and discuss the advantages and drawbacks of these tools. We show that sashimi plots (such as those used by the IGV Viewer and SpliceSeq) offer a practical solution for simple ASEs, but also indicate short-comings for highly complex genes. Manananggal is an interactive web application that offers functions specifically tailored to the identification of alternative splicing events that other tools are lacking. The ability to select a subset of isoforms allows an easier interpretation of complex alternative splicing events. In contrast to SpliceSeq and the DEXSeq splicing plot, Manananggal does not obscure the gene structure by showing full transcript models that makes it easier to determine which isoforms are expressed and which are not.

Experimental Evaluation of the Free Piston Engine - Linear Alternator (FPLA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leick, Michael T.; Moses, Ronald W.

2015-03-01

This report describes the experimental evaluation of a prototype free piston engine - linear alternator (FPLA) system developed at Sandia National Laboratories. The opposed piston design wa developed to investigate its potential for use in hybrid electric vehicles (HEVs). The system is mechanically simple with two - stroke uniflow scavenging for gas exchange and timed port fuel injection for fuel delivery, i.e. no complex valving. Electrical power is extracted from piston motion through linear alternators wh ich also provide a means for passive piston synchronization through electromagnetic coupling. In an HEV application, this electrical power would be used to chargemore » the batteries. The engine - alternator system was designed, assembled and operated over a 2 - year period at Sandia National Laboratories in Livermore, CA. This report primarily contains a description of the as - built system, modifications to the system to enable better performance, and experimental results from start - up, motoring, and hydrogen combus tion tests.« less

Alternatives to School Disciplinary and Suspension Problems.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Div. of Instruction.

Policies and procedures for disciplining students should be designed to teach them responsibility, rather than simply punish them. Providing educational opportunities to behavioral deviants is a problem that does not have a simple solution. However, alternatives to suspension or expulsion must be attempted before these disciplinary actions are…

Organizing for Innovation: Alternative Designs for the American Educational R&D System.

ERIC Educational Resources Information Center

Wirt, John; And Others

This work has been done as part of the effort to plan the National Institute of Education (NIE). The report, one of a series, proposes and analyzes alternative ways of organizing and managing (1) the proposed National Institute of Education, (2) the relationship between NIE and the rest of the Department of Health, Education, and Welfare's…

Do labeled versus unlabeled treatments of alternatives' names influence stated choice outputs? Results from a mode choice study.

PubMed

Jin, Wen; Jiang, Hai; Liu, Yimin; Klampfl, Erica

2017-01-01

Discrete choice experiments have been widely applied to elicit behavioral preferences in the literature. In many of these experiments, the alternatives are named alternatives, meaning that they are naturally associated with specific names. For example, in a mode choice study, the alternatives can be associated with names such as car, taxi, bus, and subway. A fundamental issue that arises in stated choice experiments is whether to treat the alternatives' names as labels (that is, labeled treatment), or as attributes (that is, unlabeled treatment) in the design as well as the presentation phases of the choice sets. In this research, we investigate the impact of labeled versus unlabeled treatments of alternatives' names on the outcome of stated choice experiments, a question that has not been thoroughly investigated in the literature. Using results from a mode choice study, we find that the labeled or the unlabeled treatment of alternatives' names in either the design or the presentation phase of the choice experiment does not statistically affect the estimates of the coefficient parameters. We then proceed to measure the influence toward the willingness-to-pay (WTP) estimates. By using a random-effects model to relate the conditional WTP estimates to the socioeconomic characteristics of the individuals and the labeled versus unlabeled treatments of alternatives' names, we find that: a) Given the treatment of alternatives' names in the presentation phase, the treatment of alternatives' names in the design phase does not statistically affect the estimates of the WTP measures; and b) Given the treatment of alternatives' names in the design phase, the labeled treatment of alternatives' names in the presentation phase causes the corresponding WTP estimates to be slightly higher.

The regression discontinuity design showed to be a valid alternative to a randomized controlled trial for estimating treatment effects.

PubMed

Maas, Iris L; Nolte, Sandra; Walter, Otto B; Berger, Thomas; Hautzinger, Martin; Hohagen, Fritz; Lutz, Wolfgang; Meyer, Björn; Schröder, Johanna; Späth, Christina; Klein, Jan Philipp; Moritz, Steffen; Rose, Matthias

2017-02-01

To compare treatment effect estimates obtained from a regression discontinuity (RD) design with results from an actual randomized controlled trial (RCT). Data from an RCT (EVIDENT), which studied the effect of an Internet intervention on depressive symptoms measured with the Patient Health Questionnaire (PHQ-9), were used to perform an RD analysis, in which treatment allocation was determined by a cutoff value at baseline (PHQ-9 = 10). A linear regression model was fitted to the data, selecting participants above the cutoff who had received the intervention (n = 317) and control participants below the cutoff (n = 187). Outcome was PHQ-9 sum score 12 weeks after baseline. Robustness of the effect estimate was studied; the estimate was compared with the RCT treatment effect. The final regression model showed a regression coefficient of -2.29 [95% confidence interval (CI): -3.72 to -.85] compared with a treatment effect found in the RCT of -1.57 (95% CI: -2.07 to -1.07). Although the estimates obtained from two designs are not equal, their confidence intervals overlap, suggesting that an RD design can be a valid alternative for RCTs. This finding is particularly important for situations where an RCT may not be feasible or ethical as is often the case in clinical research settings. Copyright © 2016 Elsevier Inc. All rights reserved.

Sense of Efficacy in Beginning Teachers Participating in an Alternative Certification Program

ERIC Educational Resources Information Center

McKinney, Daniel Lee

2014-01-01

Despite the widespread use of alternatively certified personnel by school systems to address shortages of highly qualified teachers, alternative certification programs (ACPs) have appeared largely inconsistent in design and lacked research in effectiveness. Hence, benefit could be gained in evaluating the competency of ACP participants in terms of…

Inclusion of Alternative and Complementary Therapies in CACREP Training Programs: A Survey

ERIC Educational Resources Information Center

Lumadue, Christine A.; Munk, Melanie; Wooten, H. Ray

2005-01-01

Given a heightened focus within the mental health profession on creative, complementary, and alternative practices, the authors surveyed CACREP programs with respect to their inclusion of such approaches in counselor training. For the purpose of this study, these approaches were designated as complementary and alternative methods (CAM) and defined…

Solar power satellite: Analysis of alternatives for transporting material to geosynchronous orbit

NASA Technical Reports Server (NTRS)

Graff, W. J.; Huang, C. J.

1976-01-01

A systems design study of the alternative methods and relative merits of various approaches to transporting and assembling a solar power satellite in geosynchronous orbit was conducted. State of the art alternatives for chemical and electrical interorbital propulsion were studied, and several possible scenarios for construction were proposed.

Organizing for teamwork in healthcare: an alternative to team training?

PubMed

Rydenfält, Christofer; Odenrick, Per; Larsson, Per Anders

2017-05-15

Purpose The purpose of this paper is to explore how organizational design could support teamwork and to identify organizational design principles that promote successful teamwork. Design/methodology/approach Since traditional team training sessions take resources away from production, the alternative approach pursued here explores the promotion of teamwork by means of organizational design. A wide and pragmatic definition of teamwork is applied: a team is considered to be a group of people that are set to work together on a task, and teamwork is then what they do in relation to their task. The input - process - output model of teamwork provides structure to the investigation. Findings Six teamwork enablers from the healthcare team literature - cohesion, collaboration, communication, conflict resolution, coordination, and leadership - are discussed, and the organizational design measures required to implement them are identified. Three organizational principles are argued to facilitate the teamwork enablers: team stability, occasions for communication, and a participative and adaptive approach to leadership. Research limitations/implications The findings could be used as a foundation for intervention studies to improve team performance or as a framework for evaluation of existing organizations. Practical implications By implementing these organizational principles, it is possible to achieve many of the organizational traits associated with good teamwork. Thus, thoughtful organization for teamwork can be used as an alternative or complement to the traditional team training approach. Originality/value With regards to the vast literature on team training, this paper offers an alternative perspective on how to improve team performance in healthcare.

SSME alternate turbopump (pump section) axial load analysis

NASA Technical Reports Server (NTRS)

Crease, G. A.; Rosello, A., Jr.; Fetfatsidis, A. K.

1989-01-01

A flow balancing computer program constructed to calculate the axial loads on the Space Shuttle Main Engine (SSME) alternate turbopumps (ATs) pump sections are described. The loads are used in turn to determine load balancing piston design requirements. The application of the program to the inlet section, inducer/impeller/stage, bearings, seals, labyrinth, damper, piston, face and corner, and stationary/rotating surfaces is indicated. Design analysis results are reported which show that the balancing piston's designs are adequate and that performance and life will not be degraded by the turbopump's axial load characteristics.

Alternative design consistency rating methods for two-lane rural highways

DOT National Transportation Integrated Search

2000-08-01

Design consistency refers to the conformance of a highway's geometry with driver expectancy. Drivers make fewer errors in the vicinity of geometric features that conform with their expectations. Techniques to evaluate the consistency of a design docu...

System 6 alternatives: an economic analysis

Treesearch

Bruce G. Hansen; Hugh W. Reynolds; Hugh W. Reynolds

1984-01-01

Three System 6 mill-size alternatives were designed and evaluated to determine their overall economic potential for producing standard-size hardwood blanks. Internal rates of return ranged from about 15 to 35 percent after taxes. Cost per square foot of blanks ranged from about $0.88 to $1.19, depending on mill size and the amount of new investment required.

Alternative Fuels Data Center: Buying and Selling Pre-Owned Alternative

Science.gov Websites

Alternative Fuels Data Center: Buying and Selling Pre-Owned Alternative Fuel and Advanced Vehicles to someone by E-mail Share Alternative Fuels Data Center: Buying and Selling Pre-Owned Alternative Fuel and Advanced Vehicles on Facebook Tweet about Alternative Fuels Data Center: Buying and Selling Pre-Owned

Temporary practice pause then resumption (TPPR) study design: an extension of the withdrawal study design to complementary and alternative medicine mind and body interventions (CAM-MABI).

PubMed

Braun, M Miles

2013-10-01

Study of complementary and alternative medicine's mind and body interventions (CAM-MABI) is hindered not only by the inability to mask participants and their teachers to the study intervention but also by the major practical hurdles of long-term study of practices that can be lifelong. Two other important methodological problems are that study of newly trained practitioners cannot directly address long-term practice, and that long-term practitioners likely self-select in ways that make finding appropriate controls (or a comparison group) challenging. The temporary practice pause then resumption study design (TPPR) introduced here is a new tool that extends the withdrawal study design, established in the field of drug evaluation, to the field of CAM-MABI. With the exception of the inability to mask, TPPR can address the other methodological problems noted above. Of great interest to investigators will likely be measures in practitioners of CAM-MABI that change with temporary pausing of CAM-MABI practice, followed by return of the measures to pre-pause levels with resumption of practice; this would suggest a link of the practice to measured changes. Such findings using this tool may enhance our insight into fundamental biological processes, leading to beneficial practical applications.

Three-D Flow Analysis of the Alternate SSME HPOT TAD

NASA Technical Reports Server (NTRS)

Kubinski, Cheryl A.

1993-01-01

This paper describes the results of numerical flow analyses performed in support of design development of the Space Shuttle Main Engine Alternate High Pressure Oxidizer Turbine Turn-around duct (TAD). The flow domain has been modeled using a 3D, Navier-Stokes, general purpose flow solver. The goal of this effort is to achieve an alternate TAD exit flow distribution which closely matches that of the baseline configuration. 3D Navier Stokes CFD analyses were employed to evaluate numerous candidate geometry modifications to the TAD flowpath in order to achieve this goal. The design iterations are summarized, as well as a description of the computational model, numerical results and the conclusions based on these calculations.

High Velocity Jet Noise Source Location and Reduction. Task 6. Noise Abatement Nozzle Design Guide.

DTIC Science & Technology

1979-04-01

the Conical Nozzle 255 on the Bertin Aerotrain . xvi ji4 ’ . _______ p .. LIST OF ILLUSTRATIONS (Continued) Figure Page D-37. Predicted and Measured...Moving-Frame Noise from the 256 Conical Nozzle on the Bertin Aerotrain . D-38. Predicted and Measured Static Noise from the 104-Tube 257 Nozzle on the...Bertin Aerotrain . D-39. Predicted and Measured Moving-Frame Noise from the 104- 258 Tube Nozzle on the Bertin Aerotrain . D-40. Relative Velocity Index m

Exploring Dimensions of Social Inclusion among Alternative Learning Centres in the USA

ERIC Educational Resources Information Center

Henderson, Dawn X.; Barnes, Rachelle Redmond

2016-01-01

Increasing disparities in out-of-school suspension and dropout rates have led a number of school districts to develop alternative models of education to include alternative learning centres (ALCs). Using an exploratory mixed methods design, this study explores dimensions of social inclusion among ALCs, located in the southeastern region of the…

Alternative transitions between existing representations in multi-scale maps

NASA Astrophysics Data System (ADS)

Dumont, Marion; Touya, Guillaume; Duchêne, Cécile

2018-05-01

Map users may have issues to achieve multi-scale navigation tasks, as cartographic objects may have various representations across scales. We assume that adding intermediate representations could be one way to reduce the differences between existing representations, and to ease the transitions across scales. We consider an existing multiscale map on the scale range from 1 : 25k to 1 : 100k scales. Based on hypotheses about intermediate representations design, we build custom multi-scale maps with alternative transitions. We will conduct in a next future a user evaluation to compare the efficiency of these alternative maps for multi-scale navigation. This paper discusses the hypotheses and production process of these alternative maps.

Investigation of progressive failure robustness and alternate load paths for damage tolerant structures

NASA Astrophysics Data System (ADS)

Marhadi, Kun Saptohartyadi

Structural optimization for damage tolerance under various unforeseen damage scenarios is computationally challenging. It couples non-linear progressive failure analysis with sampling-based stochastic analysis of random damage. The goal of this research was to understand the relationship between alternate load paths available in a structure and its damage tolerance, and to use this information to develop computationally efficient methods for designing damage tolerant structures. Progressive failure of a redundant truss structure subjected to small random variability was investigated to identify features that correlate with robustness and predictability of the structure's progressive failure. The identified features were used to develop numerical surrogate measures that permit computationally efficient deterministic optimization to achieve robustness and predictability of progressive failure. Analysis of damage tolerance on designs with robust progressive failure indicated that robustness and predictability of progressive failure do not guarantee damage tolerance. Damage tolerance requires a structure to redistribute its load to alternate load paths. In order to investigate the load distribution characteristics that lead to damage tolerance in structures, designs with varying degrees of damage tolerance were generated using brute force stochastic optimization. A method based on principal component analysis was used to describe load distributions (alternate load paths) in the structures. Results indicate that a structure that can develop alternate paths is not necessarily damage tolerant. The alternate load paths must have a required minimum load capability. Robustness analysis of damage tolerant optimum designs indicates that designs are tailored to specified damage. A design Optimized under one damage specification can be sensitive to other damages not considered. Effectiveness of existing load path definitions and characterizations were investigated for continuum

Alternatives to animal testing: research, trends, validation, regulatory acceptance.

PubMed

Huggins, Jane

2003-01-01

Current trends and issues in the development of alternatives to the use of animals in biomedical experimentation are discussed in this position paper. Eight topics are considered and include refinement of acute toxicity assays; eye corrosion/irritation alternatives; skin corrosion/irritation alternatives; contact sensitization alternatives; developmental/reproductive testing alternatives; genetic engineering (transgenic) assays; toxicogenomics; and validation of alternative methods. The discussion of refinement of acute toxicity assays is focused primarily on developments with regard to reduction of the number of animals used in the LD(50) assay. However, the substitution of humane endpoints such as clinical signs of toxicity for lethality in these assays is also evaluated. Alternative assays for eye corrosion/irritation as well as those for skin corrosion/irritation are described with particular attention paid to the outcomes, both successful and unsuccessful, of several validation efforts. Alternative assays for contact sensitization and developmental/reproductive toxicity are presented as examples of methods designed for the examination of interactions between toxins and somewhat more complex physiological systems. Moreover, genetic engineering and toxicogenomics are discussed with an eye toward the future of biological experimentation in general. The implications of gene manipulation for research animals, specifically, are also examined. Finally, validation methods are investigated as to their effectiveness, or lack thereof, and suggestions for their standardization and improvement, as well as implementation are reviewed.

Alternatively Certified Teachers: Efficacy Beliefs and Ideology

ERIC Educational Resources Information Center

Malow-Iroff, Micheline Susan; O'Connor, Evelyn A.; Bisland, Beverly Milner

2004-01-01

`The Teaching Fellows (TF) program in New York City was designed to attract individuals interested in an alternative certification program in teaching. The present investigation represents the first two waves of an ongoing investigation of TF in a graduate elementary education program. The TF begin the program during the summer by participating in…

The Bayer Facts of Science Education XVI: US STEM Workforce Shortage— Myth or Reality? Fortune 1000 Talent Recruiters on the Debate

NASA Astrophysics Data System (ADS)

Bayer Corporation

2014-10-01

A major debate is currently underway in the USA about whether there is, in fact, a science, technology, engineering and mathematics (STEM) workforce shortage in the country or not. This is the subject of the Bayer Facts of Science Education XVI: US STEM Workforce Shortage—Myth or Reality? Fortune 1000 Talent Recruiters on the Debate. An ongoing public opinion research project commissioned by Bayer Corporation, the Bayer Facts surveys examine US STEM education, diversity and workforce issues. The 16th in the series, the newest survey asks talent recruiters at some of the country's largest employers—those included in the Fortune 1000—to weigh in on current and future demand for new hires with 2- and 4-year STEM degrees. As professionals responsible for scouting, recruiting and hiring talent at Fortune 1000 companies, both STEM and non-STEM alike, these individuals are on the frontlines, tasked with assessing and filling their companies' workforce needs. The survey asks the recruiters whether new hires with 2- and 4-year STEM degrees are as, more or less in demand than their peers without STEM degrees? Are more new STEM jobs being created at their companies than non-STEM jobs? Can they find adequate numbers of qualified candidates in a timely manner and how fierce is the competition for STEM degree holders? To answer these and other questions, the survey polled 150 talent recruiters at Fortune 1000 companies, both STEM and non-STEM alike. The survey also asks the recruiters about diversion in STEM, workforce diversity in the pipeline, the role of community colleges in developing the STEM pipeline and the desired skills and competencies of new hires.

Alternative Endpoints and Approaches Selected for the Remediation of Contaminated Groundwater at Complex Sites

NASA Astrophysics Data System (ADS)

Deeb, R. A.; Hawley, E.

2011-12-01

This presentation will focus on findings, statistics, and case studies from a recently-completed report for the Department of Defense's Environmental Security Technology Certification Program (ESTCP) (Project ER-0832) on alternative endpoints and alternative remedial strategies for groundwater remediation under a variety of Federal and state cleanup programs, including technical impracticability (TI) and other Applicable or Relevant and Appropriate Requirement (ARAR) waivers, state and local designations such as groundwater management zones, Alternate Concentration Limits (ACLs), use of monitored natural attenuation (MNA) over long timeframes, and more. The primary objective of the project was to provide environmental managers and regulators with tools, metrics, and information needed to evaluate alternative endpoints for groundwater remediation at complex sites. A statistical analysis of Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) sites receiving TI waivers will be presented as well as case studies of other types of alternative endpoints and alternative remedial strategies to illustrate the variety of approaches used at complex sites and the technical analyses used to predict and document cost, timeframe, and potential remedial effectiveness. Case studies provide examples of the flexible, site-specific, application of alternative endpoints and alternative remedial strategies that have been used in the past to manage and remediate groundwater contamination at complex sites. For example, at least 13 states consider some designation for groundwater containment in their corrective action policies, such as groundwater management zones, containment zones, and groundwater classification exemption areas. These designations typically indicate that groundwater contamination is present above permissible levels. Soil and groundwater within these zones are managed to protect human health and the environment. Lesson learned for the analyses

Conceptual design report: Nuclear materials storage facility renovation. Part 6, Alternatives study

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-07-14

The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based onmore » current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for material and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections outlined by Attachment 111-2 of DOE Document AL 4700.1, Project Management System. It is organized into seven parts. This document, Part VI - Alternatives Study, presents a study of the different storage/containment options considered for NMSF.« less

26 CFR 1.3-1 - Application of optional tax.

Code of Federal Regulations, 2012 CFR

2012-04-01

.... Tables XVI through XXX apply for taxable years beginning after December 31, 1970. The standard deduction... deduction for Tables XVI through XXX, applicable to taxable years beginning in 1971, is 13 percent. For an...

26 CFR 1.3-1 - Application of optional tax.

Code of Federal Regulations, 2011 CFR

2011-04-01

.... Tables XVI through XXX apply for taxable years beginning after December 31, 1970. The standard deduction... deduction for Tables XVI through XXX, applicable to taxable years beginning in 1971, is 13 percent. For an...

26 CFR 1.3-1 - Application of optional tax.

Code of Federal Regulations, 2013 CFR

2013-04-01

.... Tables XVI through XXX apply for taxable years beginning after December 31, 1970. The standard deduction... deduction for Tables XVI through XXX, applicable to taxable years beginning in 1971, is 13 percent. For an...

26 CFR 1.3-1 - Application of optional tax.

Code of Federal Regulations, 2014 CFR

2014-04-01

.... Tables XVI through XXX apply for taxable years beginning after December 31, 1970. The standard deduction... deduction for Tables XVI through XXX, applicable to taxable years beginning in 1971, is 13 percent. For an...

26 CFR 1.3-1 - Application of optional tax.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... Tables XVI through XXX apply for taxable years beginning after December 31, 1970. The standard deduction... deduction for Tables XVI through XXX, applicable to taxable years beginning in 1971, is 13 percent. For an...

A quantitative method for evaluating alternatives. [aid to decision making

NASA Technical Reports Server (NTRS)

Forthofer, M. J.

1981-01-01

When faced with choosing between alternatives, people tend to use a number of criteria (often subjective, rather than objective) to decide which is the best alternative for them given their unique situation. The subjectivity inherent in the decision-making process can be reduced by the definition and use of a quantitative method for evaluating alternatives. This type of method can help decision makers achieve degree of uniformity and completeness in the evaluation process, as well as an increased sensitivity to the factors involved. Additional side-effects are better documentation and visibility of the rationale behind the resulting decisions. General guidelines for defining a quantitative method are presented and a particular method (called 'hierarchical weighted average') is defined and applied to the evaluation of design alternatives for a hypothetical computer system capability.

Alternative Fuels DISI Engine Research ? Autoignition Metrics.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sjoberg, Carl Magnus Goran; Vuilleumier, David

Improved engine efficiency is required to comply with future fuel economy standards. Alternative fuels have the potential to enable more efficient engines while addressing concerns about energy security. This project contributes to the science base needed by industry to develop highly efficient direct injection spark igniton (DISI) engines that also beneficially exploit the different properties of alternative fuels. Here, the emphasis is on quantifying autoignition behavior for a range of spark-ignited engine conditions, including directly injected boosted conditions. The efficiency of stoichiometrically operated spark ignition engines is often limited by fuel-oxidizer end-gas autoignition, which can result in engine knock. Amore » fuel’s knock resistance is assessed empirically by the Research Octane Number (RON) and Motor Octane Number (MON) tests. By clarifying how these two tests relate to the autoignition behavior of conventional and alternative fuel formulations, fuel design guidelines for enhanced engine efficiency can be developed.« less

Ranking of sabotage/tampering avoidance technology alternatives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrews, W.B.; Tabatabai, A.S.; Powers, T.B.

1986-01-01

Pacific Northwest Laboratory conducted a study to evaluate alternatives to the design and operation of nuclear power plants, emphasizing a reduction of their vulnerability to sabotage. Estimates of core melt accident frequency during normal operations and from sabotage/tampering events were used to rank the alternatives. Core melt frequency for normal operations was estimated using sensitivity analysis of results of probabilistic risk assessments. Core melt frequency for sabotage/tampering was estimated by developing a model based on probabilistic risk analyses, historic data, engineering judgment, and safeguards analyses of plant locations where core melt events could be initiated. Results indicate the most effectivemore » alternatives focus on large areas of the plant, increase safety system redundancy, and reduce reliance on single locations for mitigation of transients. Less effective options focus on specific areas of the plant, reduce reliance on some plant areas for safe shutdown, and focus on less vulnerable targets.« less

Diverse alternative back-splicing and alternative splicing landscape of circular RNAs

PubMed Central

Zhang, Xiao-Ou; Dong, Rui; Zhang, Yang; Zhang, Jia-Lin; Luo, Zheng; Zhang, Jun; Chen, Ling-Ling; Yang, Li

2016-01-01

Circular RNAs (circRNAs) derived from back-spliced exons have been widely identified as being co-expressed with their linear counterparts. A single gene locus can produce multiple circRNAs through alternative back-splice site selection and/or alternative splice site selection; however, a detailed map of alternative back-splicing/splicing in circRNAs is lacking. Here, with the upgraded CIRCexplorer2 pipeline, we systematically annotated different types of alternative back-splicing and alternative splicing events in circRNAs from various cell lines. Compared with their linear cognate RNAs, circRNAs exhibited distinct patterns of alternative back-splicing and alternative splicing. Alternative back-splice site selection was correlated with the competition of putative RNA pairs across introns that bracket alternative back-splice sites. In addition, all four basic types of alternative splicing that have been identified in the (linear) mRNA process were found within circRNAs, and many exons were predominantly spliced in circRNAs. Unexpectedly, thousands of previously unannotated exons were detected in circRNAs from the examined cell lines. Although these novel exons had similar splice site strength, they were much less conserved than known exons in sequences. Finally, both alternative back-splicing and circRNA-predominant alternative splicing were highly diverse among the examined cell lines. All of the identified alternative back-splicing and alternative splicing in circRNAs are available in the CIRCpedia database (http://www.picb.ac.cn/rnomics/circpedia). Collectively, the annotation of alternative back-splicing and alternative splicing in circRNAs provides a valuable resource for depicting the complexity of circRNA biogenesis and for studying the potential functions of circRNAs in different cells. PMID:27365365

Multi objective decision making in hybrid energy system design

NASA Astrophysics Data System (ADS)

Merino, Gabriel Guillermo

The design of grid-connected photovoltaic wind generator system supplying a farmstead in Nebraska has been undertaken in this dissertation. The design process took into account competing criteria that motivate the use of different sources of energy for electric generation. The criteria considered were 'Financial', 'Environmental', and 'User/System compatibility'. A distance based multi-objective decision making methodology was developed to rank design alternatives. The method is based upon a precedence order imposed upon the design objectives and a distance metric describing the performance of each alternative. This methodology advances previous work by combining ambiguous information about the alternatives with a decision-maker imposed precedence order in the objectives. Design alternatives, defined by the photovoltaic array and wind generator installed capacities, were analyzed using the multi-objective decision making approach. The performance of the design alternatives was determined by simulating the system using hourly data for an electric load for a farmstead and hourly averages of solar irradiation, temperature and wind speed from eight wind-solar energy monitoring sites in Nebraska. The spatial variability of the solar energy resource within the region was assessed by determining semivariogram models to krige hourly and daily solar radiation data. No significant difference was found in the predicted performance of the system when using kriged solar radiation data, with the models generated vs. using actual data. The spatial variability of the combined wind and solar energy resources was included in the design analysis by using fuzzy numbers and arithmetic. The best alternative was dependent upon the precedence order assumed for the main criteria. Alternatives with no PV array or wind generator dominated when the 'Financial' criteria preceded the others. In contrast, alternatives with a nil component of PV array but a high wind generator component

The Embodiment of Cases as Alternative Perspective in a Mathematics Hypermedia Learning Environment

ERIC Educational Resources Information Center

Valentine, Keri D.; Kopcha, Theodore J.

2016-01-01

This paper presents a design framework for cases as alternative perspectives (Jonassen in Learning to solve problems: a handbook for designing problem-solving learning environments, 2011a) in the context of K-12 mathematics. Using the design-based research strategy of conjecture mapping, the design of cases for a hypermedia site is described…

Beach nourishment alternative assessment to constrain cross-shore and longshore sediment transport

USGS Publications Warehouse

Karasu, Servet; Work, Paul A.; Uzlu, Ergun; Kankal, Murat; Yuksek, Omer

2016-01-01

A combined field and laboratory investigation was conducted to assess five options for creation of a recreational beach on a steep, armored shoreline on the eastern Black Sea coast. All designs incorporated a beach nourishment project placed between two existing, shore-normal, rubble-mound groins. Alternatives included the placement of a nearshore berm, longshore extensions added to the existing groins, and shore-parallel breakwaters. Several alternatives are reviewed for quantifying the performance of each design, including assessment of the change in shoreline position and project volume retained between the groins. Dimensionless benefits and benefit-cost ratios are quantified, and recommendations made on how to select the best outcome from a benefit-to-cost standpoint when options including hard structures are incorporated into a beach nourishment project design.

Alternative Fuel Guidelines for Alternative Transportation Systems.

DOT National Transportation Integrated Search

2011-01-31

The Volpe Center documented the increased use of alternative fuels on vehicles owned and operated by federal land management agencies. For each alternative fuel type, the Volpe Center documented the availability of vehicles, fueling mechanisms and pr...

30 CFR 47.53 - Alternative for hazardous waste.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Alternative for hazardous waste. 47.53 Section... waste. If the mine produces or uses hazardous waste, the operator must provide potentially exposed miners and designated representatives access to available information for the hazardous waste that— (a...

Alternative Policy Designs and the Socio-political Construction of Childcare

ERIC Educational Resources Information Center

Rigby, Elizabeth; Tarrant, Kate; Neuman, Michelle J.

2007-01-01

Policy makers and advocates have a variety of tools from which to choose when designing childcare policy. Policy design choices, such as whether to provide childcare assistance through a new government program or via a voucher for use in the private market, are in fact social, political, moral, and value-laden choices that shape the nature of…

GREEN CHEMICAL SYNTHESIS THROUGH CATALYSIS AND ALTERNATE REACTION CONDITIONS

EPA Science Inventory

Green chemical synthesis through catalysis and alternate reaction conditions

Encompassing green chemistry techniques and methodologies, we have initiated several projects at the National Risk Management Research laboratory that focus on the design and development of chemic...

Alternative Fuels Data Center: New York Transportation Data for Alternative

Science.gov Websites

Fuels and Vehicles New York Transportation Data for Alternative Fuels and Vehicles to someone by E-mail Share Alternative Fuels Data Center: New York Transportation Data for Alternative Fuels and Vehicles on Facebook Tweet about Alternative Fuels Data Center: New York Transportation Data for

Alternative Fuels Data Center: New York Coalition Helps Local Alternative

Science.gov Websites

Fuel Station Boost Revenue New York Coalition Helps Local Alternative Fuel Station Boost Revenue to someone by E-mail Share Alternative Fuels Data Center: New York Coalition Helps Local Alternative Fuel Station Boost Revenue on Facebook Tweet about Alternative Fuels Data Center: New York

Generating Alternative Engineering Designs by Integrating Desktop VR with Genetic Algorithms

ERIC Educational Resources Information Center

Chandramouli, Magesh; Bertoline, Gary; Connolly, Patrick

2009-01-01

This study proposes an innovative solution to the problem of multiobjective engineering design optimization by integrating desktop VR with genetic computing. Although, this study considers the case of construction design as an example to illustrate the framework, this method can very much be extended to other engineering design problems as well.…

Alternate Reality Gaming: Teaching Visual Art Skills to Multiple Subject Credential Candidates

ERIC Educational Resources Information Center

Engdahl, Eric

2014-01-01

Through Alternate Reality Games, students engage in narrative, play, cooperation, creativity, and joy by creating storylines focusing on one element of art. In 2008, the Luce Center at the Smithsonian American Art Museum presented Ghosts of a Chance. The first Alternative Reality Game (ARG) to be hosted by a museum, it was designed to deepen and…

Automated analysis of timber access road alternatives.

Treesearch

Doyle Burke

1974-01-01

The evaluation of timber access road alternatives is one of the primary tasks in timber harvest planning and design. During the planning stages, it is also one of the most difficult to accomplish quantitatively because a basis for comparison is related to such values as grade, length, horizontal and vertical curvature, and volumes of excavation and embankment. Within...

78 FR 23832 - Labeling Requirements for Alternative Fuels and Alternative Fueled Vehicles

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-23

... Fuels and Alternative Fueled Vehicles AGENCY: Federal Trade Commission (FTC or Commission). ACTION... Alternative Fuels and Alternative Fueled Vehicles'') to consolidate the FTC's alternative fueled vehicle (AFV...) established federal programs to encourage the development of alternative fuels and alternative fueled vehicles...

Microbial fuel cells as an alternative energy source: current status.

PubMed

Javed, Muhammad Mohsin; Nisar, Muhammad Azhar; Ahmad, Muhammad Usman; Yasmeen, Nighat; Zahoor, Sana

2018-06-22

Microbial fuel cell (MFC) technology is an emerging area for alternative renewable energy generation and it offers additional opportunities for environmental bioremediation. Recent scientific studies have focused on MFC reactor design as well as reactor operations to increase energy output. The advancement in alternative MFC models and their performance in recent years reflect the interests of scientific community to exploit this technology for wider practical applications and environmental benefit. This is reflected in the diversity of the substrates available for use in MFCs at an economically viable level. This review provides an overview of the commonly used MFC designs and materials along with the basic operating parameters that have been developed in recent years. Still, many limitations and challenges exist for MFC development that needs to be further addressed to make them economically feasible for general use. These include continued improvements in fuel cell design and efficiency as well scale-up with economically practical applications tailored to local needs.

Physical Activity, Dietary Practices, and Other Health Behaviors of At-Risk Youth Attending Alternative High Schools

ERIC Educational Resources Information Center

Kubik, Martha Y.; Lytle, Leslie; Fulkerson, Jayne A.

2004-01-01

This study assessed the interest of alternative high school staff in intervention research on students' eating and physical activity habits and the feasibility of conducting such research in alternative school settings. A two-phase descriptive design incorporated both quantitative and qualitative methods. In fall/winter 2001-2002, alternative high…

33 CFR 155.1026 - Qualified individual and alternate qualified individual.

Code of Federal Regulations, 2010 CFR

2010-07-01

... familiar with the implementation of the vessel response plan; and (4) Be trained in the responsibilities of... vessel may designate an organization to fulfill the role of the qualified individual and alternate...

Coupling between alternative polyadenylation and alternative splicing is limited to terminal introns.

PubMed

Movassat, Maliheh; Crabb, Tara L; Busch, Anke; Yao, Chengguo; Reynolds, Derrick J; Shi, Yongsheng; Hertel, Klemens J

2016-07-02

Alternative polyadenylation has been implicated as an important regulator of gene expression. In some cases, alternative polyadenylation is known to couple with alternative splicing to influence last intron removal. However, it is unknown whether alternative polyadenylation events influence alternative splicing decisions at upstream exons. Knockdown of the polyadenylation factors CFIm25 or CstF64 in HeLa cells was used as an approach in identifying alternative polyadenylation and alternative splicing events on a genome-wide scale. Although hundreds of alternative splicing events were found to be differentially spliced in the knockdown of CstF64, genes associated with alternative polyadenylation did not exhibit an increased incidence of alternative splicing. These results demonstrate that the coupling between alternative polyadenylation and alternative splicing is usually limited to defining the last exon. The striking influence of CstF64 knockdown on alternative splicing can be explained through its effects on UTR selection of known splicing regulators such as hnRNP A2/B1, thereby indirectly influencing splice site selection. We conclude that changes in the expression of the polyadenylation factor CstF64 influences alternative splicing through indirect effects.

Development Of A Numerical Tow Tank With Wave Generation To Supplement Experimental Efforts

DTIC Science & Technology

2017-12-01

vehicles CAD computer aided design CFD computational fluid dynamics FVM finite volume method IO information operations ISR intelligence, surveillance, and...deliver a product that I am truly proud of. xv THIS PAGE INTENTIONALLY LEFT BLANK xvi CHAPTER 1: Introduction 1.1 Importance of Tow Tank Testing Modern...wedge installation. 1 In 2016, NPS student Ensign Ryan Tran adapted an existing vertical plunging wedge wave maker design used at the U.S. Naval

Reaching Students in Online Courses Using Alternative Formats

ERIC Educational Resources Information Center

Fidaldo, Patricia; Thormann, Joan

2017-01-01

This research was conducted to explore whether students enrolled in graduate level courses found some Universal Design for Learning (UDL) strategies useful and if they actually used them. The strategies we investigated were presenting course information in alternative formats including PowerPoints with voiceover, screencasts, and videos as an…

Alternate Fuels for Use in Commercial Aircraft

NASA Technical Reports Server (NTRS)

Daggett, David L.; Hendricks, Robert C.; Walther, Rainer; Corporan, Edwin

2008-01-01

The engine and aircraft Research and Development (R&D) communities have been investigating alternative fueling in near-term, midterm, and far-term aircraft. A drop in jet fuel replacement, consisting of a kerosene (Jet-A) and synthetic fuel blend, will be possible for use in existing and near-term aircraft. Future midterm aircraft may use a biojet and synthetic fuel blend in ultra-efficient airplane designs. Future far-term engines and aircraft in 50-plus years may be specifically designed to use a low- or zero-carbon fuel. Synthetic jet fuels from coal, natural gas, or other hydrocarbon feedstocks are very similar in performance to conventional jet fuel, yet the additional CO2 produced during the manufacturing needs to be permanently sequestered. Biojet fuels need to be developed specifically for jet aircraft without displacing food production. Envisioned as midterm aircraft fuel, if the performance and cost liabilities can be overcome, biofuel blends with synthetic jet or Jet-A fuels have near-term potential in terms of global climatic concerns. Long-term solutions address dramatic emissions reductions through use of alternate aircraft fuels such as liquid hydrogen or liquid methane. Either of these new aircraft fuels will require an enormous change in infrastructure and thus engine and airplane design. Life-cycle environmental questions need to be addressed.

Automatic image registration performance for two different CBCT systems; variation with imaging dose

NASA Astrophysics Data System (ADS)

Barber, J.; Sykes, J. R.; Holloway, L.; Thwaites, D. I.

2014-03-01

The performance of an automatic image registration algorithm was compared on image sets collected with two commercial CBCT systems, and the relationship with imaging dose was explored. CBCT images of a CIRS Virtually Human Male Pelvis phantom (VHMP) were collected on Varian TrueBeam/OBI and Elekta Synergy/XVI linear accelerators, across a range of mAs settings. Each CBCT image was registered 100 times, with random initial offsets introduced. Image registration was performed using the grey value correlation ratio algorithm in the Elekta XVI software, to a mask of the prostate volume with 5 mm expansion. Residual registration errors were calculated after correcting for the initial introduced phantom set-up error. Registration performance with the OBI images was similar to that of XVI. There was a clear dependence on imaging dose for the XVI images with residual errors increasing below 4mGy. It was not possible to acquire images with doses lower than ~5mGy with the OBI system and no evidence of reduced performance was observed at this dose. Registration failures (maximum target registration error > 3.6 mm on the surface of a 30mm sphere) occurred in 5% to 9% of registrations except for the lowest dose XVI scan (31%). The uncertainty in automatic image registration with both OBI and XVI images was found to be adequate for clinical use within a normal range of acquisition settings.

Crashworthiness analysis on alternative square honeycomb structure under axial loading

NASA Astrophysics Data System (ADS)

Li, Meng; Deng, Zongquan; Guo, Hongwei; Liu, Rongqiang; Ding, Beichen

2013-07-01

Hexagonal metal honeycomb is widely used in energy absorption field for its special construction. However, many other metal honeycomb structures also show good energy absorption characteristics. Currently, most of the researches focus on hexagonal honeycomb, while few are performed into different honeycomb structures. Therefore, a new alternative square honeycomb is developed to expand the non-hexagonal metal honeycomb applications in the energy absorption fields with the aim of designing low mass and low volume energy absorbers. The finite element model of alternative square honeycomb is built to analyze its specific energy absorption property. As the diversity of honeycomb structure, the parameterized metal honeycomb finite element analysis program is conducted based on PCL language. That program can automatically create finite element model. Numerical results show that with the same foil thickness and cell length of metal honeycomb, the alternative square has better specific energy absorption than hexagonal honeycomb. Using response surface method, the mathematical formulas of honeycomb crashworthiness properties are obtained and optimization is done to get the maximum specific energy absorption property honeycomb. Optimal results demonstrate that to absorb same energy, alternative square honeycomb can save 10% volume of buffer structure than hexagonal honeycomb can do. This research is significant in providing technical support in the extended application of different honeycomb used as crashworthiness structures, and is absolutely essential in low volume and low mass energy absorber design.

Software For Design Of Life-Support Systems

NASA Technical Reports Server (NTRS)

Rudokas, Mary R.; Cantwell, Elizabeth R.; Robinson, Peter I.; Shenk, Timothy W.

1991-01-01

Design Assistant Workstation (DAWN) computer program is prototype of expert software system for analysis and design of regenerative, physical/chemical life-support systems that revitalize air, reclaim water, produce food, and treat waste. Incorporates both conventional software for quantitative mathematical modeling of physical, chemical, and biological processes and expert system offering user stored knowledge about materials and processes. Constructs task tree as it leads user through simulated process, offers alternatives, and indicates where alternative not feasible. Also enables user to jump from one design level to another.

Alternative Suspension System for Space Shuttle Avionics Shelf

NASA Technical Reports Server (NTRS)

Biele, Frank H., III

2010-01-01

Engineers working in the Aerospace field under deadlines and strict budgets often miss the opportunity to design something that is considered new or innovative, favoring instead to use the tried-and-true design over those that may, in fact, be more efficient. This thesis examines an electronic equipment stowage shelf suspended from a frame in the cargo bay (mid fuselage) of the United States Space Transportation System (STS), the Space Shuttle, and 3 alternative designs. Four different designs are examined and evaluated. The first design is a conventional truss, representing the tried and true approach. The second is a cable dome type structure consisting of struts and pre-stressed wiring. The third and fourth are double layer tensegrity systems consisting of contiguous struts of the order k=1 and k=2 respectively.

The Effects of an Academic Alternative High School on Academically At-Risk Students

ERIC Educational Resources Information Center

Winningham, Mark L.

2012-01-01

In a causal-comparative research design, this study investigated the effectiveness of an academic alternative school in improving at-risk student outcomes in a selected county school system in the Upper Cumberland region of Tennessee. The academic alternative high school was compared to a traditional high school serving at-risk populations.…

"Hear My Voice": Alternative High School Students' Perceptions and Implications for School Change

ERIC Educational Resources Information Center

de la Ossa, Patrice

2005-01-01

As public alternative school enrollments are increasing, educators must understand how new students adjust to and make sense of their alternative school experience. This qualitative study, which has also been turned into a video documentary, was designed to provide insight into why the traditional educational paradigm does not work for all, or…

Interim Alternative Educational Settings for Children with Disabilities.

ERIC Educational Resources Information Center

Bear, George G.; Quinn, Mary Magee; Burkholder, Susan

This manual is intended to guide school administrators, teachers, school psychologists, and others with the design and implementation of interim alternative education settings (IAES) in compliance with the Individuals with Disabilities Education Act (IDEA) as amended in 1997. Chapter 1 discusses how the IAES evolved as a means of balancing the…

SEASTAR: systematic evaluation of alternative transcription start sites in RNA.

PubMed

Qin, Zhiyi; Stoilov, Peter; Zhang, Xuegong; Xing, Yi

2018-05-04

Alternative first exons diversify the transcriptomes of eukaryotes by producing variants of the 5' Untranslated Regions (5'UTRs) and N-terminal coding sequences. Accurate transcriptome-wide detection of alternative first exons typically requires specialized experimental approaches that are designed to identify the 5' ends of transcripts. We developed a computational pipeline SEASTAR that identifies first exons from RNA-seq data alone then quantifies and compares alternative first exon usage across multiple biological conditions. The exons inferred by SEASTAR coincide with transcription start sites identified directly by CAGE experiments and bear epigenetic hallmarks of active promoters. To determine if differential usage of alternative first exons can yield insights into the mechanism controlling gene expression, we applied SEASTAR to an RNA-seq dataset that tracked the reprogramming of mouse fibroblasts into induced pluripotent stem cells. We observed dynamic temporal changes in the usage of alternative first exons, along with correlated changes in transcription factor expression. Using a combined sequence motif and gene set enrichment analysis we identified N-Myc as a regulator of alternative first exon usage in the pluripotent state. Our results demonstrate that SEASTAR can leverage the available RNA-seq data to gain insights into the control of gene expression and alternative transcript variation in eukaryotic transcriptomes.

Considerations for rigid vs. flexible pavement designs when allowed as alternate bids : technical report.

DOT National Transportation Integrated Search

2009-08-01

This report documents the research conducted for the Texas Department of Transportation (TxDOT) : concerning the use of pavement alternates. The scope of the project includes reviewing the state-of-thepractice : in methods used for pavement type sele...

Categorization of Alternative Conceptions in Electricity and Magnetism: The Case of Ethiopian Undergraduate Students

ERIC Educational Resources Information Center

Dega, Bekele Gashe; Kriek, Jeanne; Mogese, Temesgen Fereja

2013-01-01

The purpose of this study was to categorize 35 Ethiopian undergraduate physics students' alternative conceptions in the concepts of electric potential and energy. A descriptive qualitative research design was used to categorize the students' alternative conceptions. Four independently homogeneous ability focus groups were formed to elicit the…

Magnetostrictive Alternator

NASA Technical Reports Server (NTRS)

Bruder, Geoffrey A. (Inventor); Dyson, Jr., Rodger W. (Inventor)

2018-01-01

A magnetostrictive alternator configured to convert pressure waves into electrical energy is provided. It should be appreciated that the magnetostrictive alternator may be combined in some embodiments with a Stirling engine to produce electrical power. The Stirling engine creates the oscillating pressure wave and the magnetostrictive alternator converts the pressure wave into electricity. In some embodiments, the magnetostrictive alternator may include aerogel material and magnetostrictive material. The aerogel material may be configured to convert a higher amplitude pressure wave into a lower amplitude pressure wave. The magnetostrictive material may be configured to generate an oscillating magnetic field when the magnetostrictive material is compressed by the lower amplitude pressure wave.

Ergonomics intervention on an alternative design of a spinal board.

PubMed

Zadry, Hilma Raimona; Susanti, Lusi; Rahmayanti, Dina

2017-09-01

A spinal board is the evacuation tool of first aid to help the injured spinal cord. The existing spinal board has several weaknesses, both in terms of user comfort and the effectiveness and efficiency of the evacuation process. This study designs an ergonomic spinal board using the quality function deployment approach. A preliminary survey was conducted through direct observation and interviews with volunteers from the Indonesian Red Cross. Data gathered were translated into a questionnaire and answered by 47 participants in West Sumatra. The results indicate that the selection of materials, the application of strap systems as well as the addition of features are very important in designing an ergonomic spinal board. The data were used in designing an ergonomic spinal board. The use of anthropometric data ensures that this product can accommodate safety and comfort when immobilized, as well as the flexibility and speed of the rescue evacuation process.

EDIN design study alternate space shuttle booster replacement concepts. Volume 2: Design simulation results

NASA Technical Reports Server (NTRS)

Demakes, P. T.; Hirsch, G. N.; Stewart, W. A.; Glatt, C. R.

1976-01-01

Historical weight estimating relationships were developed for the liquid rocket booster (LRB) using Saturn technology, and modified as required to support the EDIN05 study. Mission performance was computed using February 1975 shuttle configuration groundrules to allow reasonable comparison of the existing shuttle with the EDIN05 designs. The launch trajectory was constrained to pass through both the RTLS/AOA and main engine cut-off points. Performance analysis was based on a point design trajectory model which optimized initial tilt rate and exo-atmospheric pitch profile. A gravity turn was employed during the boost phase in place of the shuttle angle-of-attack profile. Engine throttling add/or shutdown was used to constrain dynamic pressure and/or longitudinal acceleration where necessary.

Studies In Test Design: Annual Report.

ERIC Educational Resources Information Center

Quellmalz, Edys; And Others

This document contains the following manuscripts: "Effects of Alternate Scoring Options on the Classification of Entering Freshmen Writing Competencies," by Edys Quellmalz and Eva Baker; "Implications of Learning Research for Designing Competency Based Assessment," by Edys Quellmalz; "Effects of Alternative Discourse and…

Contributions of Alternative (Nonformal) Education in Developing Countries.

ERIC Educational Resources Information Center

Koech, Michael Kipkorir

An analysis of two alternative (nonformal) rural education projects provides data on Rural Craft Training Centers (RCTC's) in Kenya and the Sarvodaya Shramadana Movement (SSM) in Sri Lanka. The RCTC objective is to design pilot rural development strategies for expanding income in selected poor; the SSM objective is to build a "righteous…

Effective and efficient implementation of alternative project delivery : research summary.

DOT National Transportation Integrated Search

2017-05-01

Alternative project delivery (APD) methods such as Design Build (DB) and Construction Manager at Risk (CMAR), are used by state departments of transportation to improve the efficiency and effectiveness of project delivery. The Maryland Department of ...

A Goal Seeking Strategy for Constructing Systems from Alternative Components

NASA Technical Reports Server (NTRS)

Valentine, Mark E.

1999-01-01

This paper describes a methodology to efficiently construct feasible systems then modify feasible systems to meet successive goals by selecting from alternative components, a problem recognized to be n-p complete. The methodology provides a means to catalog and model alternative components. A presented system modeling Structure is robust enough to model a wide variety of systems and provides a means to compare and evaluate alternative systems. These models act as input to a methodology for selecting alternative components to construct feasible systems and modify feasible systems to meet design goals and objectives. The presented algorithm's ability to find a restricted solution, as defined by a unique set of requirements, is demonstrated against an exhaustive search of a sample of proposed shuttle modifications. The utility of the algorithm is demonstrated by comparing results from the algorithm with results from three NASA shuttle evolution studies using their value systems and assumptions.

Alternative Life Styles for Extraterrestrial Chemists

NASA Astrophysics Data System (ADS)

Benner, S.

2002-12-01

towards weird life. We shall consider alternative amino acid building blocks for proteins, alternative building blocks for nucleic acids, alternative structural features of genetic and catalytic molecules, alternative nucleophile-electrophile pairs to support metabolism, non-polar reaction modes that might support metabolism, non-terrean pH (< 0, > 14) and solvent environments for life, extreme temperature ranges (especially sub zero Celsius) low temperature ranges, alternative thermodynamic design for metabolic pathways, alternative dimensionalities of genetic and catalytic molecules, and approaches for isolating life other than conventional cell structures. Each of these discussions will combine experimental and theoretical information. The first involves organic chemical synthesis that creates new forms of chemical matter to ask "What if?" and "Why not?" questions. The second draws on a century of literature in physical organic chemistry to formulate general constraints on the structure and transformation of organic matter to provide constraints on possible Darwinian chemistries in the galaxy.

A Design Support Framework through Dynamic Deployment of Hypothesis and Verification in the Design Process

NASA Astrophysics Data System (ADS)

Nomaguch, Yutaka; Fujita, Kikuo

This paper proposes a design support framework, named DRIFT (Design Rationale Integration Framework of Three layers), which dynamically captures and manages hypothesis and verification in the design process. A core of DRIFT is a three-layered design process model of action, model operation and argumentation. This model integrates various design support tools and captures design operations performed on them. Action level captures the sequence of design operations. Model operation level captures the transition of design states, which records a design snapshot over design tools. Argumentation level captures the process of setting problems and alternatives. The linkage of three levels enables to automatically and efficiently capture and manage iterative hypothesis and verification processes through design operations over design tools. In DRIFT, such a linkage is extracted through the templates of design operations, which are extracted from the patterns embeded in design tools such as Design-For-X (DFX) approaches, and design tools are integrated through ontology-based representation of design concepts. An argumentation model, gIBIS (graphical Issue-Based Information System), is used for representing dependencies among problems and alternatives. A mechanism of TMS (Truth Maintenance System) is used for managing multiple hypothetical design stages. This paper also demonstrates a prototype implementation of DRIFT and its application to a simple design problem. Further, it is concluded with discussion of some future issues.

Development of a Low Inductance Linear Alternator for Stirling Power Convertors

NASA Technical Reports Server (NTRS)

Geng, Steven M.; Schifer, Nicholas A.

2017-01-01

The free-piston Stirling power convertor is a promising technology for high efficiency heat-to-electricity power conversion in space. Stirling power convertors typically utilize linear alternators for converting mechanical motion into electricity. The linear alternator is one of the heaviest components of modern Stirling power convertors. In addition, state-of-art Stirling linear alternators usually require the use of tuning capacitors or active power factor correction controllers to maximize convertor output power. The linear alternator to be discussed in this paper, eliminates the need for tuning capacitors and delivers electrical power output in which current is inherently in phase with voltage. No power factor correction is needed. In addition, the linear alternator concept requires very little iron, so core loss has been virtually eliminated. This concept is a unique moving coil design where the magnetic flux path is defined by the magnets themselves. This paper presents computational predictions for two different low inductance alternator configurations, and compares the predictions with experimental data for one of the configurations that has been built and is currently being tested.

Development of a Low-Inductance Linear Alternator for Stirling Power Convertors

NASA Technical Reports Server (NTRS)

Geng, Steven M.; Schifer, Nicholas A.

2017-01-01

The free-piston Stirling power convertor is a promising technology for high-efficiency heat-to-electricity power conversion in space. Stirling power convertors typically utilize linear alternators for converting mechanical motion into electricity. The linear alternator is one of the heaviest components of modern Stirling power convertors. In addition, state-of-the-art Stirling linear alternators usually require the use of tuning capacitors or active power factor correction controllers to maximize convertor output power. The linear alternator to be discussed in this paper eliminates the need for tuning capacitors and delivers electrical power output in which current is inherently in phase with voltage. No power factor correction is needed. In addition, the linear alternator concept requires very little iron, so core loss has been virtually eliminated. This concept is a unique moving coil design where the magnetic flux path is defined by the magnets themselves. This paper presents computational predictions for two different low inductance alternator configurations. Additionally, one of the configurations was built and tested at GRC, and the experimental data is compared with the predictions.

Alternative Level of Care: Canada's Hospital Beds, the Evidence and Options

PubMed Central

Sutherland, Jason M.; Crump, R. Trafford

2013-01-01

Patients designated as alternative level of care (ALC) are an ongoing concern for healthcare policy makers across Canada. These patients occupy valuable hospital beds and limit access to acute care services. The objective of this paper is to present policy alternatives to address underlying factors associated with ALC bed use. Three alternatives, and their respective limitations and structural challenges, are discussed. Potential solutions may require a mix of policy options proposed here. Inadequate policy jeopardizes new acute care activity-based funding schemes in British Columbia and Ontario. Failure to address this issue could exacerbate pressures on the existing bottlenecks in the community care system in these and other provinces. PMID:23968671

Life Management Skills. Teacher's Guide [and Student Workbook]. Parallel Alternative Strategies for Students (PASS).

ERIC Educational Resources Information Center

Goldstein, Jeren; Walford, Sylvia

This teacher's guide and student workbook are part of a series of supplementary curriculum packages presenting alternative methods and activities designed to meet the needs of Florida secondary students with mild disabilities or other special learning needs. The Life Management Skills PASS (Parallel Alternative Strategies for Students) teacher's…

Comparing Panelists' Understanding of Standard Setting across Multiple Levels of an Alternate Science Assessment

ERIC Educational Resources Information Center

Hansen, Mary A.; Lyon, Steven R.; Heh, Peter; Zigmond, Naomi

2013-01-01

Large-scale assessment programs, including alternate assessments based on alternate achievement standards (AA-AAS), must provide evidence of technical quality and validity. This study provides information about the technical quality of one AA-AAS by evaluating the standard setting for the science component. The assessment was designed to have…

Help Design Software Project

DTIC Science & Technology

1988-11-30

discrete guidelines or rules to be used in the design. They pay little if any attention to how the developer can utilize the guidance. At best, they...designer’s attention on the critical design features and present ihe rationale for those features. It also describes alternative designs that were...more leading between lines, and careful attention to the selection of fonts (Rubens and Krull, 1985 ; Brockman, 1986). Bradford (1984) outlines the

Improving spacecraft design using a multidisciplinary design optimization methodology

NASA Astrophysics Data System (ADS)

Mosher, Todd Jon

2000-10-01

Spacecraft design has gone from maximizing performance under technology constraints to minimizing cost under performance constraints. This is characteristic of the "faster, better, cheaper" movement that has emerged within NASA. Currently spacecraft are "optimized" manually through a tool-assisted evaluation of a limited set of design alternatives. With this approach there is no guarantee that a systems-level focus will be taken and "feasibility" rather than "optimality" is commonly all that is achieved. To improve spacecraft design in the "faster, better, cheaper" era, a new approach using multidisciplinary design optimization (MDO) is proposed. Using MDO methods brings structure to conceptual spacecraft design by casting a spacecraft design problem into an optimization framework. Then, through the construction of a model that captures design and cost, this approach facilitates a quicker and more straightforward option synthesis. The final step is to automatically search the design space. As computer processor speed continues to increase, enumeration of all combinations, while not elegant, is one method that is straightforward to perform. As an alternative to enumeration, genetic algorithms are used and find solutions by reviewing fewer possible solutions with some limitations. Both methods increase the likelihood of finding an optimal design, or at least the most promising area of the design space. This spacecraft design methodology using MDO is demonstrated on three examples. A retrospective test for validation is performed using the Near Earth Asteroid Rendezvous (NEAR) spacecraft design. For the second example, the premise that aerobraking was needed to minimize mission cost and was mission enabling for the Mars Global Surveyor (MGS) mission is challenged. While one might expect no feasible design space for an MGS without aerobraking mission, a counterintuitive result is discovered. Several design options that don't use aerobraking are feasible and cost

Alternative dipole magnets for ISABELLE

NASA Astrophysics Data System (ADS)

Taylor, C.; Althaus, R.; Caspi, S.; Gilbert, W.; Hassenzahl, W. V.; Meuser, R.; Rechen, J.; Warren, R.

1982-05-01

A dipole magnet, intended as a possible alternative for the ISABELLE main ring magnet, was designed. Three layers of FNAL Doubler/Saver conductor were used. Two 1.3-m-long models were built and tested, both with and without an iron core, and in both helium I and helium II. The training behavior, cyclic energy loss, point of quench initiation, and quench velocity were determined. A central field of 6.5 tesla was obtained in He I (4.4 K), and 7.6 tesla in He II (1.8K).

Development and In Vitro Bioactivity Profiling of Alternative Sustainable Nanomaterials

EPA Science Inventory

Sustainable, environmentally benign nanomaterials (NMs) are being designed as alternatives based on functionality to conventional metal-based nanomaterials (NMs) in order to minimize potential risk to human health and the environment. Development of rapid methods to evaluate the ...

Alternate fusion fuels workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-06-01

The workshop was organized to focus on a specific confinement scheme: the tokamak. The workshop was divided into two parts: systems and physics. The topics discussed in the systems session were narrowly focused on systems and engineering considerations in the tokamak geometry. The workshop participants reviewed the status of system studies, trade-offs between d-t and d-d based reactors and engineering problems associated with the design of a high-temperature, high-field reactor utilizing advanced fuels. In the physics session issues were discussed dealing with high-beta stability, synchrotron losses and transport in alternate fuel systems. The agenda for the workshop is attached.

Alternative Fuels and Their Potential Impact on Aviation

NASA Technical Reports Server (NTRS)

Daggett, D.; Hendricks, R.; Walther, R.

2006-01-01

With a growing gap between the growth rate of petroleum production and demand, and with mounting environmental needs, the aircraft industry is investigating issues related to fuel availability, candidates for alternative fuels, and improved aircraft fuel efficiency. Bio-derived fuels, methanol, ethanol, liquid natural gas, liquid hydrogen, and synthetic fuels are considered in this study for their potential to replace or supplement conventional jet fuels. Most of these fuels present the airplane designers with safety, logistical, and performance challenges. Synthetic fuel made from coal, natural gas, or other hydrocarbon feedstock shows significant promise as a fuel that could be easily integrated into present and future aircraft with little or no modification to current aircraft designs. Alternatives, such as biofuel, and in the longer term hydrogen, have good potential but presently appear to be better suited for use in ground transportation. With the increased use of these fuels, a greater portion of a barrel of crude oil can be used for producing jet fuel because aircraft are not as fuel-flexible as ground vehicles.

An Assessment of Alternate Thermal Protection Systems for the Space Shuttle Orbiter. Volume 1; Executive Summary

NASA Technical Reports Server (NTRS)

Hays, D.

1982-01-01

Alternate thermal protection system (TPS) concepts to the Space Shuttle Orbiter were assessed. Metallic, ablator, and carbon-carbon concepts which are the result of some previous design, manufacturing and testing effort were considered. Emphasis was placed on improved TPS durability, which could potentially reduce life cycle costs and improve Orbiter operational characteristics. Integrated concept/orbiter point designs were generated and analyzed on the basis of Shuttle design environments and criteria. A merit function evaluation methodology based on mission impact, life cycle costs, and risk was developed to compare the candidate concepts and to identify the best alternate. Voids and deficiencies in the technology were identified, along with recommended activities to overcome them. Finally, programmatic plans, including ROM costs and schedules, were developed for all activities required to bring the selected alternate system up to operational readiness.

Locally Developed Performance Assessments: One State's Decision to Supplant Standardized Tests with Alternative Measures

ERIC Educational Resources Information Center

Abbott, Amy Lynn

2016-01-01

The purpose for this study was to develop a descriptive account of one large Virginia school district's plan for implementation of alternative, locally developed assessments designed to supplant standardized measures. As policy reform with alternative assessments has been under-researched for the past 30 years, there is a need for studies…

Spaces of Difference: The Contradictions of Alternative Educational Programs

ERIC Educational Resources Information Center

Vadeboncoeur, Jennifer A.

2009-01-01

Drawing upon the concept of "thirdspace" (Soja 1996), this article extends sociocultural theorizations of space in relation to alternative educational programs: programs designed to re-engage youth who have been pushed out of mainstream schools. Snapshots of educational programs, provided by ethnographic research gathered in the United…

NASA advanced design program: Analysis, design, and construction of a solar powered aircraft. B.S. Thesis

NASA Technical Reports Server (NTRS)

Chan, Agnes; Conley, Kristin; Javorski, Christian T.; Cheung, Kwok-Hung; Crivelli, Paul M.; Torrey, Nancy P.; Traver, Michael L.

1992-01-01

Increase in energy demands coupled with rapid depletion of natural energy resources have deemed solar energy as the most logical alternative source of power. The major objective of this project was to build a solar powered remotely controlled aircraft to demonstrate the feasibility of solar energy as an effective, alternate source of power. The final design was optimized for minimum weight and maximum strength of the structure. These design constraints necessitated a carbon fiber composite structure. Surya is a lightweight, durable aircraft capable of achieving level flight powered entirely by solar cells.

Alternative Fistula Risk Score for Pancreatoduodenectomy (a-FRS): Design and International External Validation.

PubMed

Mungroop, Timothy H; van Rijssen, L Bengt; van Klaveren, David; Smits, F Jasmijn; van Woerden, Victor; Linnemann, Ralph J; de Pastena, Matteo; Klompmaker, Sjors; Marchegiani, Giovanni; Ecker, Brett L; van Dieren, Susan; Bonsing, Bert; Busch, Olivier R; van Dam, Ronald M; Erdmann, Joris; van Eijck, Casper H; Gerhards, Michael F; van Goor, Harry; van der Harst, Erwin; de Hingh, Ignace H; de Jong, Koert P; Kazemier, Geert; Luyer, Misha; Shamali, Awad; Barbaro, Salvatore; Armstrong, Thomas; Takhar, Arjun; Hamady, Zaed; Klaase, Joost; Lips, Daan J; Molenaar, I Quintus; Nieuwenhuijs, Vincent B; Rupert, Coen; van Santvoort, Hjalmar C; Scheepers, Joris J; van der Schelling, George P; Bassi, Claudio; Vollmer, Charles M; Steyerberg, Ewout W; Abu Hilal, Mohammed; Groot Koerkamp, Bas; Besselink, Marc G

2017-12-12

The aim of this study was to develop an alternative fistula risk score (a-FRS) for postoperative pancreatic fistula (POPF) after pancreatoduodenectomy, without blood loss as a predictor. Blood loss, one of the predictors of the original-FRS, was not a significant factor during 2 recent external validations. The a-FRS was developed in 2 databases: the Dutch Pancreatic Cancer Audit (18 centers) and the University Hospital Southampton NHS. Primary outcome was grade B/C POPF according to the 2005 International Study Group on Pancreatic Surgery (ISGPS) definition. The score was externally validated in 2 independent databases (University Hospital of Verona and University Hospital of Pennsylvania), using both 2005 and 2016 ISGPS definitions. The a-FRS was also compared with the original-FRS. For model design, 1924 patients were included of whom 12% developed POPF. Three predictors were strongly associated with POPF: soft pancreatic texture [odds ratio (OR) 2.58, 95% confidence interval (95% CI) 1.80-3.69], small pancreatic duct diameter (per mm increase, OR: 0.68, 95% CI: 0.61-0.76), and high body mass index (BMI) (per kg/m increase, OR: 1.07, 95% CI: 1.04-1.11). Discrimination was adequate with an area under curve (AUC) of 0.75 (95% CI: 0.71-0.78) after internal validation, and 0.78 (0.74-0.82) after external validation. The predictive capacity of a-FRS was comparable with the original-FRS, both for the 2005 definition (AUC 0.78 vs 0.75, P = 0.03), and 2016 definition (AUC 0.72 vs 0.70, P = 0.05). The a-FRS predicts POPF after pancreatoduodenectomy based on 3 easily available variables (pancreatic texture, duct diameter, BMI) without blood loss and pathology, and was successfully validated for both the 2005 and 2016 POPF definition.

75 FR 4469 - Food Distribution Program on Indian Reservations: Resource Limits and Exclusions, and Extended...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-28

... 253 Administrative practice and procedure, Food assistance programs, Grant programs, Social programs... title XVI of the Social Security Act or disability or blindness payments under titles I, II, X, XIV, or XVI of the Social Security Act; (2) Receives federally- or State-administered supplemental benefits...

Design and Implementation Considerations for Alternative Teacher Compensation Programs

ERIC Educational Resources Information Center

Brodsky, Andrew; DeCesare, Dale; Kramer-Wine, Jennifer

2010-01-01

Over the past decade, educators and policymakers have used a variety of approaches to designing and implementing teacher compensation programs. These approaches include federal incentive funds, state-level programs, and district initiatives. This article reviews 6 such programs in order to identify themes and draw conclusions relevant to…

Alternative Fuels

EPA Pesticide Factsheets

Alternative fuels include gaseous fuels such as hydrogen, natural gas, and propane; alcohols such as ethanol, methanol, and butanol; vegetable and waste-derived oils; and electricity. Overview of alternative fuels is here.

Alternatives for Saving and Viewing CAD Graphics for the Web.

ERIC Educational Resources Information Center

Harris, La Verne Abe; Sadowski, Mary A.

2001-01-01

Introduces some alternatives for preparing and viewing computer aided design (CAD) graphics for Internet output on a budget, without the fear of copyright infringement, and without having to go back to college to learn a complex graphic application. (Author/YDS)

Designing augmentative and alternative communication applications: the results of focus groups with speech-language pathologists and parents of children with autism spectrum disorder.

PubMed

Boster, Jamie B; McCarthy, John W

2018-05-01

The purpose of this study was to gain insight from speech-language pathologists (SLPs) and parents of children with autism spectrum disorder (ASD) regarding appealing features of augmentative and alternative communication (AAC) applications. Two separate 1-hour focus groups were conducted with 8 SLPs and 5 parents of children with ASD to identify appealing design features of AAC Apps, their benefits and potential concerns. Participants were shown novel interface designs for communication mode, play mode and incentive systems. Participants responded to poll questions and provided benefits and drawbacks of the features as part of structured discussion. SLPs and parents identified a range of appealing features in communication mode (customization, animation and colour-coding) as well as in play mode (games and videos). SLPs preferred interfaces that supported motor planning and instruction while parents preferred those features such as character assistants that would appeal to their child. Overall SLPs and parents agreed on features for future AAC Apps. SLPs and parents have valuable input in regards to future AAC app design informed by their experiences with children with ASD. Both groups are key stakeholders in the design process and should be included in future design and research endeavors. Implications for Rehabilitation AAC applications for the iPad are often designed based on previous devices without consideration of new features. Ensuring the design of new interfaces are appealing and beneficial for children with ASD can potentially further support their communication. This study demonstrates how key stakeholders in AAC including speech language pathologists and parents can provide information to support the development of future AAC interface designs. Key stakeholders may be an untapped resource in the development of future AAC interfaces for children with ASD.

PREFACE: Sensors & their Applications XVI

NASA Astrophysics Data System (ADS)

Kyriacou, Panicos; O'Riordan, Alan

2011-08-01

This volume records the Proceedings of the sixteenth conference in the biennial Sensors and Their Applications series which took place at the Clarion Hotel, Cork, Ireland between 12-14 September 2011. The conference is organized by the Instrument Science and Technology Group of the Institute of Physics. On this occasion, the conference was hosted by Tyndall National Institute at University College Cork. This year the conference returns to Ireland, having last been held in Limerick in 2003. The conference proceedings record the continuing growth of the sensors community nationally and internationally. The conferences bring together contributions from scientists and engineers from academia, research institutes and industrial establishments, and therefore provide an excellent opportunity for these communities to present and discuss the latest results in the field of sensors, instrumentation and measurement. Amongst the more traditional themes, such as optical sensing, there is growth in new areas such as biomedical sensing and instrumentation, and nanosensing, which is reflected in this volume. Similarly the contribution of modelling and simulation techniques in sensor and instrumentation design and their applications is acknowledged by a session in this area. The sessions across the conference are supported by notable contributions from invited speakers. We would like to thank all of our colleagues in the sensor and instrumentation community who have supported this event by contributing manuscripts. Our thanks also go to Tyndall National Institute for hosting this conference and all the sponsors who, with their generous financial and in-kind contributions, enabled the better organization of this conference. We would also like to thank all the members of the Instrument Science and Technology Group for their support, and in particular for refereeing the submitted manuscripts. We are also pleased to express our thanks to the Conference Department of the Institute of

Simulation of fault performance of a diesel engine driven brushless alternator through PSPICE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Narayanan, S.S.Y.; Ananthakrishnan, P.; Hangari, V.U.

1995-12-31

Analysis of the fault performance of a brushless alternator with damper windings in the main alternator has been handled ab initio as a total modeling and simulation problem through proper application of Park`s equivalent circuit approach individually to the main exciter alternator units of the brushless alternator and the same has been implemented through PSPICE. The accuracy of the parameters used in the modeling and results obtained through PSPICE implementation are then evaluated for a specific 125 kVA brushless alternator in two stages as followed: first, by comparison of the predicted fault performance obtained from simulation of the 125 kVAmore » main alternator alone treated as a conventional alternator with the results obtained through the use of closed form analytical expressions available in the literature for fault currents and torques in such conventional alternators. Secondly, by comparison of some of the simulation results with those obtained experimentally on the brushless alternator itself. To enable proper calculation of derating factors to be used in the design of such brushless alternators, simulation results then include harmonic analysis of the steady state fault currents and torques. Throughout these studies, the brushless alternator is treated to be on no load at the instant of occurrence of fault.« less

78 FR 46546 - Design-Build Contracting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

...-0043] RIN 2125-AF58 Design-Build Contracting AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... alternative technical concepts (ATC) in design-build project delivery of highway construction. The revisions... design-build proposers to submit ATCs in their technical and price proposals. The FHWA seeks comments on...

Dipolar recoupling in solid state NMR by phase alternating pulse sequences

PubMed Central

Lin, J.; Bayro, M.; Griffin, R. G.; Khaneja, N.

2009-01-01

We describe some new developments in the methodology of making heteronuclear and homonuclear recoupling experiments in solid state NMR insensitive to rf-inhomogeneity by phase alternating the irradiation on the spin system every rotor period. By incorporating delays of half rotor periods in the pulse sequences, these phase alternating experiments can be made γ encoded. The proposed methodology is conceptually different from the standard methods of making recoupling experiments robust by the use of ramps and adiabatic pulses in the recoupling periods. We show how the concept of phase alternation can be incorporated in the design of homonuclear recoupling experiments that are both insensitive to chemical-shift dispersion and rf-inhomogeneity. PMID:19157931

Alternative Fuels Data Center: State Alternative Fuel and Advanced Vehicle

Science.gov Websites

Laws and Incentives: 2014 Year in Review State Alternative Fuel and Advanced Vehicle Laws and Fuel and Advanced Vehicle Laws and Incentives: 2014 Year in Review on Facebook Tweet about Alternative Fuels Data Center: State Alternative Fuel and Advanced Vehicle Laws and Incentives: 2014 Year in Review

What Can States Learn about College and Career Readiness Accountability Measures from Alternative Education? Ask the CCRS Center

ERIC Educational Resources Information Center

Deeds, Carinne; Malter, Zachary

2016-01-01

This "Ask the CCRS Center Brief" provides an overview of the accountability measures used by states and districts to assess the college and career readiness of students who are educated in alternative programs and schools (defined hereafter as "alternative settings"). Alternative settings are designed to serve at-risk students…

IMPROVING WILLINGNESS-TO-ACCEPT RESPONSES USING ALTERNATE FORMS OF COMPENSATION

EPA Science Inventory

The purpose of this project is to design a pilot survey to investigate why surveys that ask willingness-to-accept compensation questions so often yield unreliable data and whether respondents would find alternate modes of compensation (specifically, public goods) more acceptab...

18 CFR 281.304 - Computation of alternative fuel volume.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Computation of alternative fuel volume. 281.304 Section 281.304 Conservation of Power and Water Resources FEDERAL ENERGY... not a diesel engine or turbine designed to use distillate fuels as the only substitute for natural gas...

18 CFR 281.304 - Computation of alternative fuel volume.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Computation of alternative fuel volume. 281.304 Section 281.304 Conservation of Power and Water Resources FEDERAL ENERGY... not a diesel engine or turbine designed to use distillate fuels as the only substitute for natural gas...

18 CFR 281.304 - Computation of alternative fuel volume.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Computation of alternative fuel volume. 281.304 Section 281.304 Conservation of Power and Water Resources FEDERAL ENERGY... not a diesel engine or turbine designed to use distillate fuels as the only substitute for natural gas...

18 CFR 281.304 - Computation of alternative fuel volume.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Computation of alternative fuel volume. 281.304 Section 281.304 Conservation of Power and Water Resources FEDERAL ENERGY... not a diesel engine or turbine designed to use distillate fuels as the only substitute for natural gas...

18 CFR 281.304 - Computation of alternative fuel volume.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Computation of alternative fuel volume. 281.304 Section 281.304 Conservation of Power and Water Resources FEDERAL ENERGY... not a diesel engine or turbine designed to use distillate fuels as the only substitute for natural gas...

Alternative Fuels Data Center

Science.gov Websites

AFDC » Tools Printable Version Share this resource Send a link to Alternative Fuels Data Center to someone by E-mail Share Alternative Fuels Data Center on Facebook Tweet about Alternative Fuels Data on Delicious Rank Alternative Fuels Data Center on Digg Find More places to share Alternative Fuels

Alternative technological development for RF hybridization

NASA Astrophysics Data System (ADS)

Antônio Finardi, Célio; da Fontoura Ponchet, André; Battesini Adamo, Cristina; Flacker, Alexander; Cotrin Teixeira, Ricardo; Panepucci, Roberto Ricardo

2017-03-01

The paper presents a technological solution for high frequency packaging platform evaluated up to 40 GHz. The main purpose of this development was to define an alternative hybrid technology that is more flexible and faster to prototype compared with thin film or multi chip module (MCM-D). The alternative technology also shows adequate performance for high bit rate solutions integrating optical and electronics blocks. This approach consists of a soft substrate (laminate material), plating processes (electroless Ni-P/Au, electrolytic Au) and lithography patterning. Ground coplanar waveguide was used for microwave structures with excellent ground planes connections due to easy via holes implementation. We present results of high frequency packaging of important RF blocks, such as integrated broadband bias-T, transimpedance amplifier ICs and silicon photonics optical modulators. The paper demonstrates a solution for high frequency hybridization that can be implemented with standard substrates, designed with any shape and with large numbers of metalized via holes and compatible with usual assembling techniques.

Riparian and Related Values Associated with Flood Control Project Alternatives at Wildcat and San Pablo Creeks

Treesearch

Philip A. Meyer

1989-01-01

This analysis will consider Riparian benefits from alternative project designs at Wildcat and San Pablo Creeks. Particular emphasis will be placed on quantification of riparian values and on the relationship of projects benefits for each project alternative to estimated costs of implementation.

Investigation of Alternative Return Strategies for Orion Trans-earth Injection Design Options

NASA Technical Reports Server (NTRS)

Marchand, Belinda G.; Scarritt, Sara K.; Howell, Kathleen C.; Weeks, Michael W.

2010-01-01

The purpose of this study is to investigate alternative return strategies for the Orion trans-Earth injection (TEI) phase. A dynamical systems analysis approach considers the structure of the stable and unstable Sun perturbed Earth-Moon manifolds near the Earth-Moon interface region. A hybrid approach, then, combines the results from this analysis with classical two-body methods in a targeting process that seeks to expand the window of return opportunities in a precision entry scenario. The resulting startup arcs can be used, for instance, to enhance the block set of solutions available onboard during an autonomous targeting process.

Clean air program : design guidelines for bus transit systems using hydrogen as an alternative fuel

DOT National Transportation Integrated Search

1999-04-01

Alternative fuels such as Compressed Natural Gas (CNG), Liquefied Natural Gas (LNG), Liquefied Petroleum Gas (LPG), and alcohol fuels (methanol, and ethanol) are already being used in commercial vehicles and transit buses in revenue service. Hydrogen...

Assessment "Honest Alternatives".

ERIC Educational Resources Information Center

Mandel, Susan Glazer

1995-01-01

Addresses the challenge of finding or creating alternatives to tests and traditional grading systems. Reflects on and describes the experience of creating an assessment tool and cautions against choosing alternatives that merely camouflage the grades. Encourages educators to find authentic alternatives to describe children's growth. (BAC)

Delivering an Alternative Medicine Resource to the User's Desktop via World Wide Web.

ERIC Educational Resources Information Center

Li, Jie; Wu, Gang; Marks, Ellen; Fan, Weiyu

1998-01-01

Discusses the design and implementation of a World Wide Web-based alternative medicine virtual resource. This homepage integrates regional, national, and international resources and delivers library services to the user's desktop. Goals, structure, and organizational schemes of the system are detailed, and design issues for building such a…

Performance Testing of a High Temperature Linear Alternator for Stirling Convertors

NASA Technical Reports Server (NTRS)

Metscher, Jonathan; Geng, Steven

2016-01-01

The NASA Glenn Research Center has conducted performance testing of a high temperature linear alternator (HTLA) in support of Stirling power convertor development for potential future Radioisotope Power Systems (RPS). The high temperature linear alternator is a modified version of that used in Sunpowers Advanced Stirling Convertor (ASC), and is capable of operation at temperatures up to 200 C. Increasing the temperature capability of the linear alternator could expand the mission space of future Stirling RPS designs. High temperature Neodymium-Iron-Boron (Nd-Fe-B) magnets were selected for the HTLA application, and were fully characterized and tested prior to uses. Higher temperature epoxy for alternator assembly was also selected and tested for thermal stability and strength. A characterization test was performed on the HTLA to measure its performance at various amplitudes, loads, and temperatures. HTLA endurance testing at 200 C is currently underway.

Performance Testing of a High Temperature Linear Alternator for Stirling Convertors

NASA Technical Reports Server (NTRS)

Metscher, Jonathan F.; Geng, Steven M.

2016-01-01

The NASA Glenn Research Center has conducted performance testing of a high temperature linear alternator (HTLA) in support of Stirling power convertor development for potential future Radioisotope Power Systems (RPS). The high temperature linear alternator is a modified version of that used in Sunpower's Advanced Stirling Convertor (ASC), and is capable of operation at temperatures up to 200 deg. Increasing the temperature capability of the linear alternator could expand the mission set of future Stirling RPS designs. High temperature Neodymium-Iron-Boron (Nd-Fe-B) magnets were selected for the HTLA application, and were fully characterized and tested prior to use. Higher temperature epoxy for alternator assembly was also selected and tested for thermal stability and strength. A characterization test was performed on the HTLA to measure its performance at various amplitudes, loads, and temperatures. HTLA endurance testing at 200 deg is currently underway.

SUSTAINABLE ALLOY DESIGN: SEARCHING FOR RARE EARTH ELEMENT ALTERNATIVES THROUGH CRYSTAL ENGINEERING

DTIC Science & Technology

2016-02-26

Property Maps to Guide Materials Design via Statistical Learning Summer Research Group Meeting – Materials by Design Los Alamos National Laboratory, July...Informatics, Rational design , Quantitative correlative spectroscopy and imaging, DFT, In situ high pressure mechanical property measurements, Superalloy...final, technical, interim, memorandum, master’s thesis, progress, quarterly, research , special, group study, etc. 3. DATES COVERED. Indicate the

Conceptual Chemical Process Design for Sustainability.

EPA Science Inventory

This chapter examines the sustainable design of chemical processes, with a focus on conceptual design, hierarchical and short-cut methods, and analyses of process sustainability for alternatives. The chapter describes a methodology for incorporating process sustainability analyse...

Chicano Alternative Education.

ERIC Educational Resources Information Center

Galicia, H. Homero; Almaguer, Clementina

Alternative schooling is challenging some basic notions of curriculum, operation, and structure of traditional schools; it is not challenging the basic concept of schooling. Chicano alternative education, an elusive concept, lacks a precise definition. Chicano alternative schools reflect a vast diversity in structure, focus, and goals. The Chicano…

Design of Orion Soil Impact Study using the Modern Design of Experiments

NASA Technical Reports Server (NTRS)

DeLoach, Richard

2010-01-01

Two conventional One Factor At a Time (OFAT) test matrices under consideration for an Orion Landing System subscale soil impact study are reviewed. Certain weaknesses in the designs, systemic to OFAT experiment designs generally, are identified. An alternative test matrix is proposed that is based in the Modern Design of Experiments (MDOE), which achieves certain synergies by combining the original two test matrices into one. The attendant resource savings are quantified and the impact on uncertainty is discussed.

Alternative Fuels and Hybrid Technology: A Classroom Activity Designed to Evaluate a Contemporary Problem

ERIC Educational Resources Information Center

Roy MacArthur, Amy H.; Copper, Christine L.

2009-01-01

As petroleum reserves are being depleted worldwide and energy costs are increasing, the use of alternative fuels is being more widely considered as a solution to the impending energy crisis. In this classroom activity students are presented with a real-world problem in which they must evaluate the properties and environmental impacts of a variety…