Strategies and arguments of ergonomic design for sustainability.

PubMed

Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

2012-01-01

Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

Y-12 Site environmental protection program implementation plan (EPPIP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-11-01

The Y-12 Plant Environmental Protection Program is conducted to: (1) protect public health and the environment from chemical and radiological releases occurring from current plant operations and past waste management and operational practices; (2) ensure compliance with federal, state, and local environmental regulations and DOE directives; (3) identify potential environmental problems; (4) evaluate existing environmental contamination and determine the need for remedial actions and mitigative measures; (5) monitor the progress of ongoing remedial actions and cleanup measures; and (6) inform the public of environmental issues relating to DOE operations. DOE Order 5400.1, General Environmental Protection Program, defines the general requirementsmore » for environmental protection programs at DOE facilities. This Environmental Protection Program Implementation Plan (EPPIP) defines the methods by which the Y-12 Plant staff will comply with the order by: (1) referencing environmental protection goals and objectives and identifying strategies and timetables for attaining them; (2) providing the overall framework for the design and implementation of the Y-12 Environmental Protection Program; and (3) assigning responsibilities for complying with the requirements of the order. The EPPIP is revised and updated annually.« less

Using Reflective Journals in a Sustainable Design Studio

ERIC Educational Resources Information Center

Gulwadi, Gowri Betrabet

2009-01-01

Purpose: This paper seeks to introduce a pedagogical method used in a design studio as part of a curriculum-greening process to encourage reflection on the complexity of sustainability and sustainable design. Online reflective journals were used in two semesters of a sustainable design studio to develop students' awareness and understanding of…

Using Reflective Journals in a Sustainable Design Studio

ERIC Educational Resources Information Center

Gulwadi, Gowri Betrabet

2009-01-01

Purpose: The purpose of this paper is to introduce a pedagogical method used in a design studio as part of a curriculum-greening process to encourage reflection on the complexity of sustainability and sustainable design. Online reflective journals were used in two semesters of a sustainable design studio to develop students' awareness and…

Beyond Magnet® Designation: Perspectives From Nurse Managers on Factors of Sustainability and High-Performance Programming.

PubMed

Hayden, Margaret A; Wolf, Gail A; Zedreck-Gonzalez, Judith F

2016-10-01

The aim of this study was to identify patterns of high-performing behaviors and nurse manager perceptions of the factors of Magnet® sustainability at a multidesignated Magnet organization. The Magnet program recognizes exemplary professional nursing practice and is challenging to achieve and sustain. Only 10% (n = 42) of Magnet hospitals sustained designation for 12 years or longer. This study explored the perspectives of Magnet nurse managers regarding high-performing teams and the sustainability of Magnet designation. A qualitative study of nurse managers was conducted at 1 multidesignated Magnet organization (n = 13). Interview responses were analyzed using pattern recognition of Magnet model domains and characteristics of high-performing teams and then related to factors of Magnet sustainability. Transformational leadership is both an essential factor for sustainability and a potential barrier to sustainability of Magnet designation. Transformational nursing leaders lead high-performing teams and should be in place at all levels as an essential factor in sustaining Magnet redesignation.

Sustainable Rest Area Design and Operations

DOT National Transportation Integrated Search

2017-10-01

One way in which State Departments of Transportation (DOTs) can modernize their rest areas while reducing operations and maintenance costs is by incorporating sustainable practices into rest area design and operations. Sustainability practices that D...

Urban landscape architecture design under the view of sustainable development

NASA Astrophysics Data System (ADS)

Chen, WeiLin

2017-08-01

The concept of sustainable development in modern city landscape design advocates landscape architecture, which is the main development direction in the field of landscape design. They are also effective measures to promote the sustainable development of city garden. Based on this, combined with the connotation of sustainable development and sustainable design, this paper analyzes and discusses the design of urban landscape under the concept of sustainable development.

P2Y12 regulates platelet adhesion/activation, thrombus growth, and thrombus stability in injured arteries

PubMed Central

André, Patrick; Delaney, Suzanne M.; LaRocca, Thomas; Vincent, Diana; DeGuzman, Francis; Jurek, Marzena; Koller, Beverley; Phillips, David R.; Conley, Pamela B.

2003-01-01

The critical role for ADP in arterial thrombogenesis was established by the clinical success of P2Y12 antagonists, currently used at doses that block 40–50% of the P2Y12 on platelets. This study was designed to determine the role of P2Y12 in platelet thrombosis and how its complete absence affects the thrombotic process. P2Y12-null mice were generated by a gene-targeting strategy. Using an in vivo mesenteric artery injury model and real-time continuous analysis of the thrombotic process, we observed that the time for appearance of first thrombus was delayed and that only small, unstable thrombi formed in P2Y12–/– mice without reaching occlusive size, in the absence of aspirin. Platelet adhesion to vWF was impaired in P2Y12–/– platelets. While adhesion to fibrinogen and collagen appeared normal, the platelets in thrombi from P2Y12–/– mice on collagen were less dense and less activated than their WT counterparts. P2Y12–/– platelet activation was also reduced in response to ADP or a PAR-4–activating peptide. Thus, P2Y12 is involved in several key steps of thrombosis: platelet adhesion/activation, thrombus growth, and stability. The data suggest that more aggressive strategies of P2Y12 antagonism will be antithrombotic without the requirement of aspirin cotherapy and may provide benefits even to the aspirin-nonresponder population. PMID:12897207

Universities' Intermediary Role in the "Design for Sustainability" Field

ERIC Educational Resources Information Center

Küçüksayraç, Elif; Wever, Renee; Brezet, Han

2017-01-01

Purpose: This paper aims to investigate the intermediary role of universities in spreading design for sustainability into industry. Design/methodology/approach: Three case studies were undertaken on Delft University of Technology, Design for Sustainability Program from The Netherlands; a center on sustainable consumption and production; and Prof.…

Sustainable supply chain design: a configurational approach.

PubMed

Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.

Sustainable Supply Chain Design: A Configurational Approach

PubMed Central

Masoumik, S. Maryam; Raja Ghazilla, Raja Ariffin

2014-01-01

Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research. PMID:24523652

Nutritional Sustainability of Pet Foods12

PubMed Central

Swanson, Kelly S.; Carter, Rebecca A.; Yount, Tracy P.; Aretz, Jan; Buff, Preston R.

2013-01-01

Sustainable practices meet the needs of the present without compromising the ability of future generations to meet their needs. Applying these concepts to food and feed production, nutritional sustainability is the ability of a food system to provide sufficient energy and essential nutrients required to maintain good health in a population without compromising the ability of future generations to meet their nutritional needs. Ecological, social, and economic aspects must be balanced to support the sustainability of the overall food system. The nutritional sustainability of a food system can be influenced by several factors, including the ingredient selection, nutrient composition, digestibility, and consumption rates of a diet. Carbon and water footprints vary greatly among plant- and animal-based ingredients, production strategy, and geographical location. Because the pet food industry is based largely on by-products and is tightly interlinked with livestock production and the human food system, however, it is quite unique with regard to sustainability. Often based on consumer demand rather than nutritional requirements, many commercial pet foods are formulated to provide nutrients in excess of current minimum recommendations, use ingredients that compete directly with the human food system, or are overconsumed by pets, resulting in food wastage and obesity. Pet food professionals have the opportunity to address these challenges and influence the sustainability of pet ownership through product design, manufacturing processes, public education, and policy change. A coordinated effort across the industry that includes ingredient buyers, formulators, and nutritionists may result in a more sustainable pet food system. PMID:23493530

Mainstreaming the Sustainably Designed School.

ERIC Educational Resources Information Center

Weintraub, Deborah; Pierce, Tony

This paper documents a school building energy efficiency and sustainability project involving the Newport Mesa Unified School District, Southern California Edison's Design and Engineering Services (D&ES), and the architectural firm Perkins and Will. The paper first examines the project design objectives and then discusses each of the project…

Teaching Ethics for Design for Sustainable Behaviour: A Pilot Study

ERIC Educational Resources Information Center

Lilley, Debra; Lofthouse, Vicky

2010-01-01

Design for sustainable behaviour is an emerging activity under the banner of sustainable design which aims to reduce the environmental and social impacts of products by moderating users' interaction with them. The intended outcome of design for sustainable behaviour is to reduce negative environmental and societal impacts. However, designers'…

Permeability and storage ability of inorganic X12Y12 fullerenes for lithium atom and ion

NASA Astrophysics Data System (ADS)

Munsif, Sajida; Ayub, Khurshid

2018-04-01

In the current study, permeability and storage ability (exohedral and endohedral) of inorganic fullerenes X12Y12 (X = B, Al and Y = N, P) for lithium atom/ion (Li/Li+) is studied theoretically at M05-2X method. The translation of Li/Li+ through Al12P12 nano-cages is not only a kinetically feasible process but also has very high separation ratio in the favor of lithium atom over lithium ion. Adsorption/encapsulation energies of alkali metal on/in nano-cages show strong correlation with the size of the nano-cage. The percent changes in H-L gap for Li+-X12Y12 are about 1-25%, whereas the corresponding changes for Li-X12Y12 are 30-72%.

Texas Sustainable School Design Guideline.

ERIC Educational Resources Information Center

Nicklas, Michael; Bailey, Gary; Padia, Harshad D.; Malin, Nadav

This guide offers a detailed listing of the key practices and technologies that can help create a sustainable school. The document includes hundreds of cost-effective recommendations that can improve the energy performance and environmental quality of school designs. Each design and construction phase is addressed, from site selection through…

Workshop on the Design of Sustainable Product Systems and Supply Chains; Final Report,

EPA Science Inventory

ABOUT THE WORKSHOP The Workshop on the Design of Sustainable Product Systems and Supply Chains was held September 12–13, 2011 at the U.S. National Science Foundation (NSF) offices in Arlington, Virginia. The Workshop was co-sponsored by the U.S. Environmental Protection Agency (...

Modeling ligand recognition at the P2Y12 receptor in light of X-ray structural information

NASA Astrophysics Data System (ADS)

Paoletta, Silvia; Sabbadin, Davide; von Kügelgen, Ivar; Hinz, Sonja; Katritch, Vsevolod; Hoffmann, Kristina; Abdelrahman, Aliaa; Straßburger, Jens; Baqi, Younis; Zhao, Qiang; Stevens, Raymond C.; Moro, Stefano; Müller, Christa E.; Jacobson, Kenneth A.

2015-08-01

The G protein-coupled P2Y12 receptor (P2Y12R) is an important antithrombotic target and of great interest for pharmaceutical discovery. Its recently solved, highly divergent crystallographic structures in complex either with nucleotides (full or partial agonist) or with a nonnucleotide antagonist raise the question of which structure is more useful to understand ligand recognition. Therefore, we performed extensive molecular modeling studies based on these structures and mutagenesis, to predict the binding modes of major classes of P2Y12R ligands previously reported. Various nucleotide derivatives docked readily to the agonist-bound P2Y12R, but uncharged nucleotide-like antagonist ticagrelor required a hybrid receptor resembling the agonist-bound P2Y12R except for the top portion of TM6. Supervised molecular dynamics (SuMD) of ticagrelor binding indicated interactions with the extracellular regions of P2Y12R, defining possible meta-binding sites. Ureas, sulfonylureas, sulfonamides, anthraquinones and glutamic acid piperazines docked readily to the antagonist-bound P2Y12R. Docking dinucleotides at both agonist- and antagonist-bound structures suggested interactions with two P2Y12R pockets. Thus, our structure-based approach consistently rationalized the main structure-activity relationships within each ligand class, giving useful information for designing improved ligands.

Y-12 Groundwater Protection Program Groundwater Monitoring Data Compendium, Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This document is a compendium of water quality and hydrologic characterization data obtained through December 2005 from the network of groundwater monitoring wells and surface water sampling stations (including springs and building sumps) at the U.S. Department of Energy (DOE) Y-12 National Security Complex (Y-12) in Oak Ridge, Tennessee that have been sampled since January 2003. The primary objectives of this document, hereafter referenced as the Y-12 Groundwater Protection Program (GWPP) Compendium, are to: (1) Serve as a single-source reference for monitoring data that meet the requirements of the Y-12 GWPP, as defined in the Y-12 GWPP Management Plan (BWXTmore » Y-12 L.L.C. [BWXT] 2004); (2) Maintain a detailed analysis and evaluation of the monitoring data for each applicable well, spring, and surface water sampling station, with a focus on results for the primary inorganic, organic, and radiological contaminants in groundwater and surface water at Y-12; and (3) Ensure retention of ''institutional knowledge'' obtained over the long-term (>20-year) history of groundwater and surface water monitoring at Y-12 and the related sources of groundwater and surface water contamination. To achieve these goals, the Y-12 GWPP Compendium brings together salient hydrologic, geologic, geochemical, water-quality, and environmental compliance information that is otherwise disseminated throughout numerous technical documents and reports prepared in support of completed and ongoing environmental contamination assessment, remediation, and monitoring activities performed at Y-12. The following subsections provide background information regarding the overall scope and format of the Y-12 GWPP Compendium and the planned approach for distribution and revision (i.e., administration) of this ''living'' document.« less

Explorations in Teaching Sustainable Design: A Studio Experience in Interior Design/Architecture

ERIC Educational Resources Information Center

Gurel, Meltem O.

2010-01-01

This article argues that a design studio can be a dynamic medium to explore the creative potential of the complexity of sustainability from its technological to social ends. The study seeks to determine the impact of an interior design/architecture studio experience that was initiated to teach diverse meanings of sustainability and to engage the…

Y-12 Groundwater Protection Program CY2012 Triennial Report Of The Monitoring Well Inspection And Maintenance Program Y-12 National Security Complex, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2013-09-01

This document is the triennial report for the Well Inspection and Maintenance Program of the Y- 12 Groundwater Protection Program (GWPP), at the U.S. Department of Energy (DOE) Y-12 National Security Complex (Y-12). This report formally documents well inspections completed by the GWPP on active and inactive wells at Y-12 during calendar years (CY) 2010 through 2012. In addition, this report also documents well inspections performed under the Y-12 Water Resources Restoration Program, which is administered by URS|CH2M Oak Ridge (UCOR). This report documents well maintenance activities completed since the last triennial inspection event (CY 2009); and provides summary tablesmore » of well inspections and well maintenance activities during the reference time period.« less

Sustainable Design Approach: A case study of BIM use

NASA Astrophysics Data System (ADS)

Abdelhameed, Wael

2017-11-01

Achieving sustainable design in areas such as energy-efficient design depends largely on the accuracy of the analysis performed after the design is completed with all its components and material details. There are different analysis approaches and methods that predict relevant values and metrics such as U value, energy use and energy savings. Although certain differences in the accuracy of these approaches and methods have been recorded, this research paper does not focus on such matter, where determining the reason for discrepancies between those approaches and methods is difficult, because all error sources act simultaneously. The research paper rather introduces an approach through which BIM, building information modelling, can be utilised during the initial phases of the designing process, by analysing the values and metrics of sustainable design before going into the design details of a building. Managing all of the project drawings in a single file, BIM -building information modelling- is well known as one digital platform that offers a multidisciplinary detailed design -AEC model (Barison and Santos, 2010, Welle et.al., 2011). The paper presents in general BIM use in the early phases of the design process, in order to achieve certain required areas of sustainable design. The paper proceeds to introduce BIM use in specific areas such as site selection, wind velocity and building orientation, in terms of reaching the farther possible sustainable solution. In the initial phases of designing, material details and building components are not fully specified or selected yet. The designer usually focuses on zoning, topology, circulations, and other design requirements. The proposed approach employs the strategies and analysis of BIM use during those initial design phases in order to have the analysis and results of each solution or alternative design. The stakeholders and designers would have a better effective decision making process with a full clarity of each

Building Integrated Design Practice under the Concept of Sustainable Development

NASA Astrophysics Data System (ADS)

Liu, Xuexin

2018-03-01

With the continuous development of social economy, people are more demanding for architecture. Some advanced design concepts are gradually applied to the design of buildings. Under the concept of sustainable development, building integration design has also been widely used to promote the rapid development of architectural design. Integrated design concepts and sustainable development concepts play an important role to meet people’s requirements. This article will explore the concept of sustainable development under the concept of integrated architectural design and practice analysis, propose appropriate measures.

The role of anthropometry in designing for sustainability.

PubMed

Nadadur, Gopal; Parkinson, Matthew B

2013-01-01

An understanding of human factors and ergonomics facilitates the design of artefacts, tasks and environments that fulfil their users' physical and cognitive requirements. Research in these fields furthers the goal of efficiently accommodating the desired percentage of user populations through enhanced awareness and modelling of human variability. Design for sustainability (DfS) allows for these concepts to be leveraged in the broader context of designing to minimise negative impacts on the environment. This paper focuses on anthropometry and proposes three ways in which its consideration is relevant to DfS: reducing raw material consumption, increasing usage lifetimes and ethical human resource considerations. This is demonstrated through the application of anthropometry synthesis, virtual fitting, and sizing and adjustability allocation methods in the design of an industrial workstation seat for use in five distinct global populations. This work highlights the importance of and opportunities for using ergonomic design principles in DfS efforts. This research demonstrates the relevance of some anthropometry-based ergonomics concepts to the field of design for sustainability. A global design case study leverages human variability considerations in furthering three sustainable design goals: reducing raw material consumption, increasing usage lifetimes and incorporating ethical human resource considerations in design.

Protease-activated receptor-4 and purinergic receptor P2Y12 dimerize, co-internalize, and activate Akt signaling via endosomal recruitment of β-arrestin.

PubMed

Smith, Thomas H; Li, Julia G; Dores, Michael R; Trejo, JoAnn

2017-08-18

Vascular inflammation and thrombosis require the concerted actions of several different agonists, many of which act on G protein-coupled receptors (GPCRs). GPCR dimerization is a well-established phenomenon that can alter protomer function. In platelets and other cell types, protease-activated receptor-4 (PAR4) has been shown to dimerize with the purinergic receptor P2Y12 to coordinate β-arrestin-mediated Akt signaling, an important mediator of integrin activation. However, the mechanism by which the PAR4-P2Y12 dimer controls β-arrestin-dependent Akt signaling is not known. We now report that PAR4 and P2Y12 heterodimer internalization is required for β-arrestin recruitment to endosomes and Akt signaling. Using bioluminescence resonance energy transfer, immunofluorescence microscopy, and co-immunoprecipitation in cells expressing receptors exogenously and endogenously, we demonstrate that PAR4 and P2Y12 specifically interact and form dimers expressed at the cell surface. We also found that activation of PAR4 but not of P2Y12 drives internalization of the PAR4-P2Y12 heterodimer. Remarkably, activated PAR4 internalization was required for recruitment of β-arrestin to endocytic vesicles, which was dependent on co-expression of P2Y12. Interestingly, stimulation of the PAR4-P2Y12 heterodimer promotes β-arrestin and Akt co-localization to intracellular vesicles. Moreover, activated PAR4-P2Y12 internalization is required for sustained Akt activation. Thus, internalization of the PAR4-P2Y12 heterodimer is necessary for β-arrestin recruitment to endosomes and Akt signaling and lays the foundation for examining whether blockade of PAR4 internalization reduces integrin and platelet activation. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

Sustainability for the Americas Initiative: Land Design Institute, Ball State University

Treesearch

J. L. Motloch; Pedro Pacheco; Eloy F. Jr. Casagrande

2006-01-01

The Ball State University Land Design Institute (LDI) pursues ecologically and culturally sustainable land design through education, research, outreach, and demonstration. LDI seeks to lead communities (local, regional, global) to sustainable futures. It connects communities and sustainability experts to optimize education about land management, planning, and design...

Analysis of design tool attributes with regards to sustainability benefits

NASA Astrophysics Data System (ADS)

Zain, S.; Ismail, A. F.; Ahmad, Z.; Adesta, E. Y. T.

2018-01-01

The trend of global manufacturing competitiveness has shown a significant shift from profit and customer driven business to a more harmonious sustainability paradigm. This new direction, which emphasises the interests of three pillars of sustainability, i.e., social, economic and environment dimensions, has changed the ways products are designed. As a result, the roles of design tools in the product development stage of manufacturing in adapting to the new strategy are vital and increasingly challenging. The aim of this paper is to review the literature on the attributes of design tools with regards to the sustainability perspective. Four well-established design tools are selected, namely Quality Function Deployment (QFD), Failure Mode and Element Analysis (FMEA), Design for Six Sigma (DFSS) and Design for Environment (DfE). By analysing previous studies, the main attributes of each design tool and its benefits with respect to each sustainability dimension throughout four stages of product lifecycle are discussed. From this study, it is learnt that each of the design tools contributes to the three pillars of sustainability either directly or indirectly, but they are unbalanced and not holistic. Therefore, the prospective of improving and optimising the design tools is projected, and the possibility of collaboration between the different tools is discussed.

Molecular mechanisms of platelet P2Y(12) receptor regulation.

PubMed

Cunningham, Margaret R; Nisar, Shaista P; Mundell, Stuart J

2013-02-01

Platelets are critical for haemostasis, however inappropriate activation can lead to the development of arterial thrombosis, which can result in heart attack and stroke. ADP is a key platelet agonist that exerts its actions via stimulation of two surface GPCRs (G-protein-coupled receptors), P2Y(1) and P2Y(12). Similar to most GPCRs, P2Y receptor activity is tightly regulated by a number of complex mechanisms including receptor desensitization, internalization and recycling. In the present article, we review the molecular mechanisms that underlie P2Y(1) and P2Y(12) receptor regulation, with particular emphasis on the structural motifs within the P2Y(12) receptor, which are required to maintain regulatory protein interaction. The implications of these findings for platelet responsiveness are also discussed.

Technology Evaluation for the Big Spring Water Treatment System at the Y-12 National Security Complex, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Becthel Jacobs Company LLC

2002-11-01

The Y-12 National Security Complex (Y-12 Complex) is an active manufacturing and developmental engineering facility that is located on the U.S. Department of Energy (DOE) Oak Ridge Reservation. Building 9201-2 was one of the first process buildings constructed at the Y-12 Complex. Construction involved relocating and straightening of the Upper East Fork Poplar Creek (UEFPC) channel, adding large quantities of fill material to level areas along the creek, and pumping of concrete into sinkholes and solution cavities present within the limestone bedrock. Flow from a large natural spring designated as ''Big Spring'' on the original 1943 Stone & Webster Buildingmore » 9201-2 Field Sketch FS6003 was captured and directed to UEFPC through a drainpipe designated Outfall 51. The building was used from 1953 to 1955 for pilot plant operations for an industrial process that involved the use of large quantities of elemental mercury. Past operations at the Y-12 Complex led to the release of mercury to the environment. Significant environmental media at the site were contaminated by accidental releases of mercury from the building process facilities piping and sumps associated with Y-12 Complex mercury handling facilities. Releases to the soil surrounding the buildings have resulted in significant levels of mercury in these areas of contamination, which is ultimately transported to UEFPC, its streambed, and off-site. Bechtel Jacobs Company LLC (BJC) is the DOE-Oak Ridge Operations prime contractor responsible for conducting environmental restoration activities at the Y-12 Complex. In order to mitigate the mercury being released to UEFPC, the Big Spring Water Treatment System will be designed and constructed as a Comprehensive Environmental Response, Compensation, and Liability Act action. This facility will treat the combined flow from Big Spring feeding Outfall 51 and the inflow now being processed at the East End Mercury Treatment System (EEMTS). Both discharge to UEFPC

Y-12 Integrated Materials Management System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alspaugh, D. H.; Hickerson, T. W.

2002-06-03

The Integrated Materials Management System, when fully implemented, will provide the Y-12 National Security Complex with advanced inventory information and analysis capabilities and enable effective assessment, forecasting and management of nuclear materials, critical non-nuclear materials, and certified supplies. These capabilities will facilitate future Y-12 stockpile management work, enhance interfaces to existing National Nuclear Security Administration (NNSA) corporate-level information systems, and enable interfaces to planned NNSA systems. In the current national nuclear defense environment where, for example, weapons testing is not permitted, material managers need better, faster, more complete information about material properties and characteristics. They now must manage non-special nuclearmore » material at the same high-level they have managed SNM, and information capabilities about both must be improved. The full automation and integration of business activities related to nuclear and non-nuclear materials that will be put into effect by the Integrated Materials Management System (IMMS) will significantly improve and streamline the process of providing vital information to Y-12 and NNSA managers. This overview looks at the kinds of information improvements targeted by the IMMS project, related issues, the proposed information architecture, and the progress to date in implementing the system.« less

Sustainable design guidelines to support the Washington State ferries terminal design manual : stormwater and material issues.

DOT National Transportation Integrated Search

2011-08-01

In an effort to assist the developers of the terminal design manual in potentially addressing : sustainable design issues, the overall goal is to produce Sustainable Design Guidelines that : will specifically address the unique needs and requirements...

Differential endosomal sorting of a novel P2Y12 purinoreceptor mutant.

PubMed

Cunningham, Margaret R; Nisar, Shaista P; Cooke, Alexandra E; Emery, Elizabeth D; Mundell, Stuart J

2013-05-01

P2Y12 receptor internalization and recycling play an essential role in ADP-induced platelet activation. Recently, we identified a patient with a mild bleeding disorder carrying a heterozygous mutation of P2Y12 (P341A) whose P2Y12 receptor recycling was significantly compromised. Using human cell line models, we identified key proteins regulating wild-type (WT) P2Y12 recycling and investigated P2Y12 -P341A receptor traffic. Treatment with ADP resulted in delayed Rab5-dependent internalization of P341A when compared with WT P2Y12 . While WT P2Y12 rapidly recycled back to the membrane via Rab4 and Rab11 recycling pathways, limited P341A recycling was observed, which relied upon Rab11 activity. Although minimal receptor degradation was evident, P341A was localized in Rab7-positive endosomes with considerable agonist-dependent accumulation in the trans-Golgi network (TGN). Rab7 activity is known to facilitate recruitment of retromer complex proteins to endosomes to transport cargo to the TGN. Here, we identified that P341A colocalized with Vps26; depletion of which blocked limited recycling and promoted receptor degradation. This study has identified key points of divergence in the endocytic traffic of P341A versus WT-P2Y12 . Given that these pathways are retained in human platelets, this research helps define the molecular mechanisms regulating P2Y12 receptor traffic and explain the compromised receptor function in the platelets of the P2Y12 -P341A-expressing patient. © 2013 John Wiley & Sons A/S.

EBF3 Design and Sustainability Considerations

NASA Technical Reports Server (NTRS)

Taminger, Karen M. B.

2015-01-01

Electron beam freeform fabrication (EBF3) is a cross-cutting technology for producing structural metal parts using an electron beam and wire feed in a layer-additive fashion. This process was developed by researchers at NASA Langley to specifically address needs for aerospace applications. Additive manufacturing technologies like EBF3 enable efficient design of materials and structures by tailoring microstructures and chemistries at the local level to improve performance at the global level. Additive manufacturing also facilitates design freedom by integrating assemblies into complex single-piece components, eliminating flanges, fasteners and joints, resulting in reduced size and mass. These same efficiencies that permit new design paradigms also lend themselves to supportability and sustainability. Long duration space missions will require a high degree of self-sustainability. EBF3 is a candidate technology being developed to allow astronauts to conduct repairs and fabricate new components and tools on demand, with efficient use of feedstock materials and energy.

Mapping the Journey: Visualising Collaborative Experiences for Sustainable Design Education

ERIC Educational Resources Information Center

McMahon, Muireann; Bhamra, Tracy

2017-01-01

The paradigm of design is changing. Designers now need to be equipped with the skills and knowledge that will enable them to participate in the global move towards a sustainable future. The challenges arise as Design for Sustainability deals with very complex and often contradictory issues. Collaborative learning experiences recognise that these…

Designing a Self-Sustaining Community

ERIC Educational Resources Information Center

Roman, Harry T.

2012-01-01

One has heard a great deal in recent years about designing self-sustaining communities, organizations that can subsist independently on what they make. Planning for this kind of community is challenging--today most people take for granted having essential services like water, sewage, communications, natural gas, and electricity delivered right to…

Active living by design sustainability strategies.

PubMed

Kraft, M Katherine; Lee, Joanne J; Brennan, Laura K

2012-11-01

Despite substantial increases in improving the translation of health promotion research into practice, community initiatives still struggle with maintaining changes once grant funding has ended. Researchers, funders, and community practitioners are interested in practices that maintain and sustain their efforts. This qualitative study conducted a content analysis of evaluation findings from Active Living by Design (ALbD) to identify activities that community coalitions implemented to maintain their initiative and secure ongoing influence in communities. Investigators analyzed data from interviews, focus groups, and the Progress Reporting System to identify sustainability approaches clustering into five areas: partnership expansion, sustainable funding, permanent advisory committees, policy change, and institution/organization change. Partnership expansion occurred across sectors and disciplines and into broader geographic areas. Additional funding extended beyond grants to earned income streams and dedicated tax revenues. Permanent advisory committees were established to inform decision makers about a range of active living impacts. Policy changes in zoning and comprehensive plans ensured maintenance of health-promoting built environments. Sustainability through institution/organization changes led to allocation of dedicated staff and incorporation of active living values into agency missions. Active Living by Design partnerships defined and messaged their projects to align with policymakers' interests and broad partnership audiences. They found innovative supporters and adapted their original vision to include quality of life, nonmotorized transport, and other complementary efforts that expanded their reach and influence. These sustainability strategies altered awareness within communities, changed community decision-making processes, and created policy changes that have the potential to maintain environments that promote physical activity for years to come

A broader consideration of human factor to enhance sustainable building design.

PubMed

Attaianese, Erminia

2012-01-01

The link between ergonomic/human factor and sustainability seems to be clearly evidenced mainly in relation to social dimension of sustainability, in order to contribute to assure corporate social responsibility and global value creation. But the will to establish an equilibrated connection among used resources in human activities, supported by the sustainability perspective, evidences that the contribution of ergonomics/human factors can be effectively enlarged to other aspects, especially in relation to building design. In fact a sustainable building is meant to be a building that contributes, through its characteristics and attribute, to a sustainable development by assuring, in the same time, a decrease of resources use and environmental impact and an increase of health, safety and comfort of the occupants. The purpose of this paper is to analyze in a broader sense the contribution of ergonomic/human factor to design of sustainable building, focusing how ergonomics principles, methodology and techniques can improve building design, enhancing its sustainability performance during all phases of building lifecycle.

A Rubric to Analyze Student Abilities to Engage in Sustainable Design

ERIC Educational Resources Information Center

Watson, Mary Katherine; Barrella, Elise; Wall, Thomas A.; Noyes, Caroline; Rodgers, Michael

2017-01-01

As engineering programs have begun to infuse sustainability into their undergraduate curricula, assessment tools are needed to further inform these reform efforts. The goal of this project was to demonstrate the use of a new rubric to examine students' abilities to engage in sustainable design. The rubric includes 16 sustainable design criteria…

Cangrelor: A New Route for P2Y12 Inhibition.

PubMed

Sible, Alexandra M; Nawarskas, James J

Antiplatelet therapy with a P2Y12 inhibitor is a key component of treatment for patients with acute coronary syndromes undergoing percutaneous coronary intervention. Before the development of cangrelor (Kengreal, The Medicines Company, Parsippany, NJ), only oral P2Y12 inhibitors were available. Cangrelor is a reversible P2Y12 inhibitor that is administered as an intravenous infusion, and its quick onset and offset make it an appealing option for antiplatelet therapy, particularly for patients who are unable to take oral medications. Although cangrelor struggled to show benefit in early trials, the positive results of the CHAMPION PHOENIX trial led to its approval for use as an adjunct to percutaneous coronary intervention to reduce the risk of periprocedural myocardial infarction, repeat coronary revascularization, and stent thrombosis in patients who have not been treated with another P2Y12 inhibitor and are not being given a glycoprotein IIb/IIIa inhibitor. Cangrelor has also been evaluated as an option for bridging therapy in patients who must discontinue their oral P2Y12 inhibitor before coronary artery bypass grafting. This review of cangrelor will discuss its mechanism of action, its pharmacodynamics and pharmacokinetics, the clinical trial experience, and its potential place in therapy.

12 CFR 225.127 - Investment in corporations or projects designed primarily to promote community welfare.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Investment in corporations or projects designed... CONTROL (REGULATION Y) Regulations Financial Holding Companies Interpretations § 225.127 Investment in corporations or projects designed primarily to promote community welfare. (a) Under § 225.25(b)(6) of...

Designing Sustainable Supply Chains for Biofuels

EPA Science Inventory

Driven by the Energy and Independence Act of 2007 mandate to increase production of alternative fuels and to ensure that this increase causes minimal environmental impact, a project to design sustainable biofuel supply chains has been developed. This effort uses life cycle asses...

Implementation of sustainability in bridge design, construction and maintenance.

DOT National Transportation Integrated Search

2012-12-01

The focus of this research is to develop a framework for more sustainable design and construction : processes for new bridges, and sustainable maintenance practices for existing bridges. The framework : includes a green rating system for bridges. The...

P2Y12 expression and function in alternatively activated human microglia

PubMed Central

Ase, Ariel R.; Kinsara, Angham; Rao, Vijayaraghava T.S.; Michell-Robinson, Mackenzie; Leong, Soo Yuen; Butovsky, Oleg; Ludwin, Samuel K.; Séguéla, Philippe; Bar-Or, Amit; Antel, Jack P.

2015-01-01

Objective: To investigate and measure the functional significance of altered P2Y12 expression in the context of human microglia activation. Methods: We performed in vitro and in situ experiments to measure how P2Y12 expression can influence disease-relevant functional properties of classically activated (M1) and alternatively activated (M2) human microglia in the inflamed brain. Results: We demonstrated that compared to resting and classically activated (M1) human microglia, P2Y12 expression is increased under alternatively activated (M2) conditions. In response to ADP, the endogenous ligand of P2Y12, M2 microglia have increased ligand-mediated calcium responses, which are blocked by selective P2Y12 antagonism. P2Y12 antagonism was also shown to decrease migratory and inflammatory responses in human microglia upon exposure to nucleotides that are released during CNS injury; no effects were observed in human monocytes or macrophages. In situ experiments confirm that P2Y12 is selectively expressed on human microglia and elevated under neuropathologic conditions that promote Th2 responses, such as parasitic CNS infection. Conclusion: These findings provide insight into the roles of M2 microglia in the context of neuroinflammation and suggest a mechanism to selectively target a functionally unique population of myeloid cells in the CNS. PMID:25821842

Identification and characterization of a novel P2Y 12 variant in a patient diagnosed with type 1 von Willebrand disease in the European MCMDM-1VWD study.

PubMed

Daly, Martina E; Dawood, Ban B; Lester, William A; Peake, Ian R; Rodeghiero, Francesco; Goodeve, Anne C; Makris, Michael; Wilde, Jonathan T; Mumford, Andrew D; Watson, Stephen P; Mundell, Stuart J

2009-04-23

We investigated whether defects in the P2Y(12) ADP receptor gene (P2RY12) contribute to the bleeding tendency in 92 index cases enrolled in the European MCMDM-1VWD study. A heterozygous mutation, predicting a lysine to glutamate (K174E) substitution in P2Y(12), was identified in one case with mild type 1 von Willebrand disease (VWD) and a VWF defect. Platelets from the index case and relatives carrying the K174E defect changed shape in response to ADP, but showed reduced and reversible aggregation in response to 10 muM ADP, unlike the maximal, sustained aggregation observed in controls. The reduced response was associated with an approximate 50% reduction in binding of [(3)H]2MeS-ADP to P2Y(12), whereas binding to the P2Y(1) receptor was normal. A hemagglutinin-tagged K174E P2Y(12) variant showed surface expression in CHO cells, markedly reduced binding to [(3)H]2MeS-ADP, and minimal ADP-mediated inhibition of forskolin-induced adenylyl cyclase activity. Our results provide further evidence for locus heterogeneity in type 1 VWD.

Using GREENSCOPE for Sustainable Process Design: An Educational Opportunity

EPA Science Inventory

Increasing sustainability can be approached through the education of those who design, construct, and operate facilities. As chemical engineers learn elements of process systems engineering, they can be introduced to sustainability concepts. The EPA’s GREENSCOPE methodology and...

Magnetic properties of quadruple perovskite solid solutions Ca{sub 1–x}Y{sub x}Cu{sub 3}Fe{sub 4}O{sub 12} and Y{sub 1–y}Ce{sub x}Cu{sub 3}Fe{sub 4}O{sub 12}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murakami, Makoto; Mori, Shigeo; Yamada, Ikuya, E-mail: i-yamada@21c.osakafu-u.ac.jp

Magnetic properties of the quadruple perovskite solid solutions Ca{sub 1–x}Y{sub x}Cu{sub 3}Fe{sub 4}O{sub 12} and Y{sub 1–y}Ce{sub y}Cu{sub 3}Fe{sub 4}O{sub 12} are investigated. Ca{sub 1–x}Y{sub x}Cu{sub 3}Fe{sub 4}O{sub 12} shows continuous increase in the ferromagnetic transition temperature as x increases. Y{sub 1–y}Ce{sub y}Cu{sub 3}Fe{sub 4}O{sub 12} exhibits a ferromagnetic-antiferromagnetic transition in the vicinity of y = 0.5. These observations demonstrate the electron doping effect on magnetic properties of charge-disproportionated ACu{sub 3}Fe{sub 4}O{sub 12} phases.

Clopidogrel and ticlopidine: P2Y12 adenosine diphosphate-receptor antagonists for the prevention of atherothrombosis.

PubMed

Savi, Pierre; Herbert, Jean-Marc

2005-04-01

Ticlopidine and clopidogrel belong to the same chemical family of thienopyridine adenosine diphosphate (ADP)-receptor antagonists. They have shown their efficacy as platelet antiaggregant and antithrombotic agents in many animal models, both ex vivo and in vivo. Although ticlopidine was discovered more than 30 years ago, it was only recently that the mechanism of action of ADP-receptor antagonists was characterized in detail. Ticlopidine and clopidogrel both behave in vivo as specific antagonists of P2Y (12), one of the ADP receptors on platelets. Metabolic steps that involve cytochrome P450-dependent pathways are required to generate the active metabolite responsible for this in vivo activity. The active moiety is a reactive thiol derivative that targets P2Y (12) on platelets. The interaction is irreversible, accounting for the observation that platelets are definitely antiaggregated, even if no active metabolite is detectable in plasma. The interaction is specific for P2Y (12); other purinoceptors such as P2Y (1) and P2Y (13) are spared. This results in inhibition of the binding of the P2Y (12) agonist 2-methylthio-ADP and the ADP-induced downregulation of adenylyl cyclase. Platelet aggregation is affected not only when triggered by ADP but also by aggregation inducers when used at concentrations requiring released ADP as an amplifier. The efficacy and safety of clopidogrel has been established in several large, randomized, controlled trials. The clopidogrel versus aspirin in patients at risk of ischaemic events (CAPRIE) trial demonstrated the superiority of clopidogrel over acetylsalicylic acid (ASA) in patients at risk of ischemic events, including ischemic stroke, myocardial infarction (MI), and peripheral arterial disease. The clopidogrel in unstable angina to prevent recurrent ischemic events (CURE) trial showed a sustained, incremental benefit when clopidogrel was added to standard therapy (including ASA) in patients with unstable angina and non-Q-wave MI

Designing Sustainable Supply Chains (Journal Article)

EPA Science Inventory

The Office of Research and Development within the U.S. Environmental Protection Agency (EPA) has recently put forth a new vision for environmental protection that states that sustainability is our “True North”. In support of this new vision, an effort to design supply chains to ...

Sustainable Supply Chain Design by the P-Graph Framework

EPA Science Inventory

The present work proposes a computer-aided methodology for designing sustainable supply chains in terms of sustainability metrics by resorting to the P-graph framework. The methodology is an outcome of the collaboration between the Office of Research and Development (ORD) of the ...

Early stage design decisions: the way to achieve sustainable buildings at lower costs.

PubMed

Bragança, Luís; Vieira, Susana M; Andrade, Joana B

2014-01-01

The construction industry attempts to produce buildings with as lower environmental impact as possible. However, construction activities still greatly affect environment; therefore, it is necessary to consider a sustainable project approach based on its performance. Sustainability is an important issue to consider in design, not only due to environmental concerns but also due to economic and social matters, promoting architectural quality and economic advantages. This paper aims to identify the phases through which a design project should be developed, emphasising the importance and ability of earlier stages to influence sustainability, performance, and life cycle cost. Then, a selection of sustainability key indicators, able to be used at the design conceptual phase and able to start predicting environmental sustainability performance of buildings is presented. The output of this paper aimed to enable designers to compare and evaluate the consequences of different design solutions, based on preliminary data, and facilitate the collaboration between stakeholders and clients and eventually yield a sustainable and high performance building throughout its life cycle.

Greenroads : a sustainability performance metric for roadway design and construction.

DOT National Transportation Integrated Search

2009-11-01

Greenroads is a performance metric for quantifying sustainable practices associated with roadway design and construction. Sustainability is defined as having seven key components: ecology, equity, economy, extent, expectations, experience and exposur...

The State of Sustainability Reporting in Universities

ERIC Educational Resources Information Center

Lozano, Rodrigo

2011-01-01

Purpose: The purpose of this paper is to review and assess the state of sustainability reporting in universities. Design/methodology/approach: Analysis of the performance level of 12 universities sustainability reports using the Graphical Assessment of Sustainability in Universities tool. Findings: The results show that sustainability reporting in…

Superintendents as Sensemakers in the Design of Sustainable Schools

ERIC Educational Resources Information Center

Klocko, Barbara A.

2009-01-01

The impact of the superintendent in the design decision-making process of sustainable school buildings was examined in this study to determine whether superintendents who have more knowledge and commitment to sustainability have a greater influence on green building practices within their school districts than those who do not. Utilizing a…

Ergonomics and sustainability in the design of everyday use products.

PubMed

Tosi, Francesca

2012-01-01

The relationship between Ergonomics and Design is a key element in the sustainability project, as well as in many other areas of experimental design. In the Design for Sustainability field, Ergonomics is a strategic factor for design culture innovation, providing designers with the necessary knowledge and skills regarding human characteristics and capabilities, as well as user needs and desires during use and interaction with products in work activities and everyday life. Ergonomics is also a strategic innovative factor in design development and manufacturing processes. In fact, ergonomics provides a methodological approach in user-product interaction evaluation processes through the use of participatory design and survey methods, user trials, direct observation, savings and resource conservation, etc.On the other hand, design offers solutions able to interpret user needs and expectations, at the same time suggesting new behaviors and lifestyles.In Design for Sustainability, the ergonomic and user-centered approach contributes greatly to lifestyles and innovative use of products--making it possible to understand and interpret real people needs and expectations in their everyday actions and behavior.New consumption patterns, new awareness of lifestyles, energy source consumption, purchasing methods and consumption style etc. can be supported by design innovation, responding to expressed and unexpressed user needs. With this in mind, the ergonomic approach represents the starting point for design choices and at the same time, a tool for assessing their appropriateness and effectiveness.

Early Stage Design Decisions: The Way to Achieve Sustainable Buildings at Lower Costs

PubMed Central

Bragança, Luís; Vieira, Susana M.; Andrade, Joana B.

2014-01-01

The construction industry attempts to produce buildings with as lower environmental impact as possible. However, construction activities still greatly affect environment; therefore, it is necessary to consider a sustainable project approach based on its performance. Sustainability is an important issue to consider in design, not only due to environmental concerns but also due to economic and social matters, promoting architectural quality and economic advantages. This paper aims to identify the phases through which a design project should be developed, emphasising the importance and ability of earlier stages to influence sustainability, performance, and life cycle cost. Then, a selection of sustainability key indicators, able to be used at the design conceptual phase and able to start predicting environmental sustainability performance of buildings is presented. The output of this paper aimed to enable designers to compare and evaluate the consequences of different design solutions, based on preliminary data, and facilitate the collaboration between stakeholders and clients and eventually yield a sustainable and high performance building throughout its life cycle. PMID:24578630

Evaluating How to Alter Design Processes to Consider Sustainable Practices

NASA Astrophysics Data System (ADS)

Liew, V.

2017-12-01

The Design Cycle is a well established design methodology featuring four major criterion (Investigating, Planning, Creating, and Evaluating), adopted by International Baccalaureate education foundation. However, as sustainability has become an alarmingly relevant issue, the Design Cycle is not a sufficient guide in its current form. With the the excessive quantities of waste entering Hong Kong's landfills as well as the worldwide issue of rapidly depleting resources, it is imperative that products reduce waste via adaptive or mitigative methods, and that an environmental sector be integrated into the existing Design Cycle. In this piece of research, sustainable design practices will be evaluated to form a list of specifications that products can be assessed against to reduce waste and repurpose materials.

Y-12 National Security Complex Biological Monitoring and Abatement Program 2007 Calendar Yeare Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, M.J.; Greeley, M. S. Jr.; Morris, G. W.

2008-07-01

), located off the ORR and below an area of intensive commercial and light industrial development; EFK 13.8, located upstream from the Oak Ridge Wastewater Treatment Facility (ORWTF); and EFK 6.3 located approximately 1.4 km below the ORR boundary (Fig. 1.1). Actual sampling locations on EFPC may differ slightly by task according to specific requirements of the task. Brushy Fork (BF) at kilometer (BFK) 7.6 and Hinds Creek at kilometer (HCK) 20.6 are the most commonly used reference sites for the Y-12 BMAP. Additional sites off the ORR are also occasionally used for reference, including Beaver Creek, Bull Run, Cox Creek, and Paint Rock Creek (Fig. 1.2). Summaries of the sampling designs for the three primary tasks of the Y-12 Complex BMAP for EFPC are presented in Tables 1.1-1.3. This report covers the 2007 study period, although data collected outside this time period are included as appropriate. To address the biological monitoring requirements for Bear Creek and McCoy Branch, CERCLA-funded data is summarized in Appendix A (for Bear Creek) and Appendix B (for McCoy Branch). Data for these two watersheds is provided herein to address Section IX of the NPDES Permit for Y-12, where 'Results of these CERCLA programs can be used to meet the biological monitoring requirements of this permit'. For potential comparison with instream biological measures, a summary of the toxicity testing results for Y-12 outfalls into upper EFPC is provided in Appendix C (these results have been previously reported).« less

Toward a transdisciplinary approach of ergonomic design for sustainability.

PubMed

Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

2012-01-01

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

Safe, High-Performance, Sustainable Precast School Design

ERIC Educational Resources Information Center

Finsen, Peter I.

2011-01-01

School design utilizing integrated architectural and structural precast and prestressed concrete components has gained greater acceptance recently for numerous reasons, including increasingly sophisticated owners and improved learning environments based on material benefits such as: sustainability, energy efficiency, indoor air quality, storm…

Radiological monitoring plan for the Oak Ridge Y-12 Plant: Surface Water

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-10-01

The Y-12 Plant conducts a surface water monitoring program in response to DOE Orders and state of Tennessee requirements under the National Pollutant Discharge Elimination System (NPDES). The anticipated codification of DOE Order 5400.5 for radiation protection of the public and the environment (10 CFR Part 834) will require an environmental radiation protection plan (ERPP). The NPDES permit issued by the state of Tennessee requires a radiological monitoring plan (RMP) for Y-12 Plant surface waters. In a May 4, 1995 memo, the state of Tennessee, Division of Water Pollution Control, stated their desired needs and goals regarding the content ofmore » RMPs, associated documentation, and data resulting from the RMPs required under the NPDES permitting system (L. Bunting, General Discussion, Radiological Monitoring Plans, Tennessee Division of Water Pollution Control, May 4,1995). Appendix A provides an overview of how the Y-12 Plant will begin to address these needs and goals. It provides a more complete, documented basis for the current Y-12 Plant surface water monitoring program and is intended to supplement documentation provided in the Annual Site Environmental Reports (ASERs), NPDES reports, Groundwater Quality Assessment Reports, and studies conducted under the Y-12 Plant Environmental Restoration (ER) Program. The purpose of this update to the Y-12 Plant RMP is to satisfy the requirements of the current NPDES permit, DOE Order 5400.5, and 10 CFR Part 834, as current proposed, by defining the radiological monitoring plan for surface water for the Y-12 Plant. This plan includes initial storm water monitoring and data analysis. Related activities such as sanitary sewer and sediment monitoring are also summarized. The plan discusses monitoring goals necessary to determine background concentrations of radionuclides, to quantify releases, determine trends, satisfy regulatory requirements, support consequence assessments, and meet requirements that releases be ``as

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Sustainable principles for siting, design and construction... FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL BUILDINGS § 433.6 Sustainable principles for siting, design and construction. [Reserved] ...

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Sustainable principles for siting, design and construction... FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL BUILDINGS § 433.6 Sustainable principles for siting, design and construction. [Reserved] ...

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Sustainable principles for siting, design and construction... FOR NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL BUILDINGS § 433.6 Sustainable principles for siting, design and construction. [Reserved] ...

Incorporating Bioenergy in Sustainable Landscape Designs Workshop Two: Agricultural Landscapes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Negri, M. Cristina; Ssegane, H.

The Bioenergy Technologies Office hosted two workshops on Incorporating Bioenergy in Sustainable Landscape Designs with Oak Ridge and Argonne National Laboratories in 2014. The second workshop focused on agricultural landscapes and took place in Argonne, IL from June 24—26, 2014. The workshop brought together experts to discuss how landscape design can contribute to the deployment and assessment of sustainable bioenergy. This report summarizes the discussions that occurred at this particular workshop.

Sustainable Design Practices and Consumer Behavior: FCS Student Perceptions

ERIC Educational Resources Information Center

Ulasewicz, Connie; Vouchilas, Gus

2008-01-01

The purpose of this study was to gather information on the perceptions of sustainability in design held by family and consumer sciences (FCS) students majoring in interior design and apparel design/merchandising. Likert-scale responses were used to explore differences and similarities between students in the two majors. Overall, interior design…

Evaluation of a School Building in Turkey According to the Basic Sustainable Design Criteria

NASA Astrophysics Data System (ADS)

Arslan, H. D.

2017-08-01

In Turkey, as well as many other developing countries, the significance of sustainable education buildings has only recently become recognized and the issue of sustainability issue has not been sufficiently involved in laws and regulations. In this study, first of all architectural sustainability with basic design criteria has been explained. After that selected type primary school project in Turkey has been evaluated according to the sustainable design criteria. Type project of school buildings significantly limits the sustainability performance expected from buildings. It is clear that type projects shorten the planning time as they include a designing process that is independent of settlement and they are repeated in various places with different characteristics, indeed. On the other hand; abundance of disadvantages such as the overlook of the natural physical and structural properties of the location mostly restricts the sustainable design of the building. For sustainable buildings, several factors such as the environment, land, climate, insolation, direction etc. shall be taken into consideration at the beginning stage. Therefore; implementation of type projects can be deemed to be inappropriate for sustainability.

Sustainable design guidelines to support the Washington State ferries terminal design manual : design guideline application and refinement.

DOT National Transportation Integrated Search

2013-08-01

The Sustainable Design Guidelines were developed in Phase I of this research program (WA-RD : 816.1). Here we are reporting on the Phase II effort that beta-tested the Phase I Guidelines on : example ferry terminal designs and refinements made ...

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Sustainable principles for siting, design and construction. [Reserved] 435.6 Section 435.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS...-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Sustainable principles for siting, design and construction. [Reserved] 435.6 Section 435.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS...-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Sustainable principles for siting, design and construction. [Reserved] 435.6 Section 435.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS...-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

Purinergic P2Y12 Receptor Activation in Eosinophils and the Schistosomal Host Response.

PubMed

Muniz, Valdirene S; Baptista-Dos-Reis, Renata; Benjamim, Claudia F; Mata-Santos, Hilton A; Pyrrho, Alexandre S; Strauch, Marcelo A; Melo, Paulo A; Vicentino, Amanda R R; Silva-Paiva, Juliana; Bandeira-Melo, Christianne; Weller, Peter F; Figueiredo, Rodrigo T; Neves, Josiane S

2015-01-01

Identifying new target molecules through which eosinophils secrete their stored proteins may reveal new therapeutic approaches for the control of eosinophilic disorders such as host immune responses to parasites. We have recently reported the expression of the purinergic P2Y12 receptor (P2Y12R) in human eosinophils; however, its functional role in this cell type and its involvement in eosinophilic inflammation remain unknown. Here, we investigated functional roles of P2Y12R in isolated human eosinophils and in a murine model of eosinophilic inflammation induced by Schistosoma mansoni (S. mansoni) infection. We found that adenosine 5'-diphosphate (ADP) induced human eosinophils to secrete eosinophil peroxidase (EPO) in a P2Y12R dependent manner. However, ADP did not interfere with human eosinophil apoptosis or chemotaxis in vitro. In vivo, C57Bl/6 mice were infected with cercariae of the Belo Horizonte strain of S. mansoni. Analyses performed 55 days post infection revealed that P2Y12R blockade reduced the granulomatous hepatic area and the eosinophilic infiltrate, collagen deposition and IL-13/IL-4 production in the liver without affecting the parasite oviposition. As found for humans, murine eosinophils also express the P2Y12R. P2Y12R inhibition increased blood eosinophilia, whereas it decreased the bone marrow eosinophil count. Our results suggest that P2Y12R has an important role in eosinophil EPO secretion and in establishing the inflammatory response in the course of a S. mansoni infection.

Platelets Express Activated P2Y12 Receptor in Patients With Diabetes Mellitus.

PubMed

Hu, Liang; Chang, Lin; Zhang, Yan; Zhai, Lili; Zhang, Shenghui; Qi, Zhiyong; Yan, Hongmei; Yan, Yan; Luo, Xinping; Zhang, Si; Wang, Yiping; Kunapuli, Satya P; Ye, Hongying; Ding, Zhongren

2017-08-29

Platelets from patients with diabetes mellitus are hyperactive. Hyperactivated platelets may contribute to cardiovascular complications and inadequate responses to antiplatelet agents in the setting of diabetes mellitus. However, the underlying mechanism of hyperactivated platelets is not completely understood. We measured P2Y 12 expression on platelets from patients with type 2 diabetes mellitus and on platelets from rats with diabetes mellitus. We also assayed platelet P2Y 12 activation by measuring cAMP and VASP phosphorylation. The antiplatelet and antithrombotic effects of AR-C78511 and cangrelor were compared in rats. Finally, we explored the role of the nuclear factor-κB pathway in regulating P2Y 12 receptor expression in megakaryocytes. Platelet P2Y 12 levels are 4-fold higher in patients with type 2 diabetes mellitus compared with healthy subjects. P2Y 12 expression correlates with ADP-induced platelet aggregation (r=0.89, P <0.01). P2Y 12 in platelets from patients with diabetes mellitus is constitutively activated. Although both AR-C78511, a potent P2Y 12 inverse agonist, and cangrelor have similar antiplatelet efficacy on platelets from healthy subjects, AR-C78511 exhibits more powerful antiplatelet effects on diabetic platelets than cangrelor (aggregation ratio 36±3% versus 49±5%, respectively, P <0.05). Using a FeCl 3 -injury mesenteric arteriole thrombosis model in rats and an arteriovenous shunt thrombosis model in rats, we found that the inverse agonist AR-C78511 has greater antithrombotic effects on GK rats with diabetes mellitus than cangrelor (thrombus weight 4.9±0.3 mg versus 8.3±0.4 mg, respectively, P <0.01). We also found that a pathway involving high glucose-reactive oxygen species-nuclear factor-κB increases platelet P2Y 12 receptor expression in diabetes mellitus. Platelet P2Y 12 receptor expression is significantly increased and the receptor is constitutively activated in patients with type 2 diabetes mellitus, which contributes to

Environmental assessment for the Plating Shop Replacement, Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The existing of Y-12 Plant Plating Shop provides vital support functions for the US Department of Energy (DOE) Defense Programs operations. In addition to weapon component plating, the facility performs other plating services to support existing operations for the Y-12 Plant, other DOE facilities, and other federal agencies. In addition, the facility would also provide essential deplating services for weapons reclamation and teardown. The existing Y-12 Plant Plating Shop is presently located in a structure which is rapidly deteriorating and obsolete. The existing building structure was originally designed to house a steam plant, not chemical plating operations. As such, vaporsmore » from plating operations have deteriorated the structure to a point where a new facility is needed for continued safe operations. The potential environmental impacts of the proposed action was anticipated to be minimal and would affect no environmentally sensitive areas. Some short-term construction- and demolition-related effects would occur in an already highly industrialized setting. These include temporarily disturbing 72,000 square feet of land for the new plating shop and related site preparation activities, constructing a permanent building on part of the area, and using 80 construction personnel over a period of 18 months for site preparation and construction. Demolition effects vary depending on the environmentally suitable option selected, but they could involve as much as 262 cubic yards of concrete rubble and approximately 1600 cubic yards of soil disposed as waste. Either 1600 cubic yards of fresh soil or 1850 yards of clay and fresh soil could be required. Soil erosion would be minimal. Approximately 20 construction personnel would be involved for 12 months in demolition activities.« less

HABIT CHANGES OF Y3Al5O12 AND Y3Ga5O12 GROWN FROM A PbO-PbF2 FLUX,

DTIC Science & Technology

Al2O3 or - Ga2O3 ratio in the melt. Y3Ga5O12 crystals have a pure (211) habit when grown from either a Y2O3- or PbO-rich melt. The crystals develop...small (110) faces when grown from a Ga2O3 - or PbF2-rich melt. Y3Al5O12 crystals have a pure (110) when grown from either a PbF2- or Al2O3-rich melt... Ga2O3 -rich melts. It is believed that the habit variations are caused by changes in either the surface diffusion or step propagation, due to Pb

Modified diadenosine tetraphosphates with dual specificity for P2Y1 and P2Y12 are potent antagonists of ADP-induced platelet activation

PubMed Central

CHANG, H.; YANACHKOV, I. B.; DIX, E. J.; LI, Y. F.; BARNARD, M. R.; WRIGHT, G. E.; MICHELSON, A. D.; FRELINGER, A. L.

2017-01-01

Summary Background Diadenosine 5′,5‴-P1,P4-tetraphosphate (Ap4A), a natural compound stored in platelet dense granules, inhibits ADP-induced platelet aggregation. Ap4A inhibits the platelet ADP receptors P2Y1 and P2Y12, is a partial agonist of P2Y12, and is a full agonist of the platelet ATP-gated ion channel P2X1. Modification of the Ap4A tetraphosphate backbone enhances inhibition of ADP-induced platelet aggregation. However, the effects of these Ap4A analogs on human platelet P2Y1, P2Y12 and P2X1 are unclear. Objective To determine the agonist and antagonist activities of diadenosine tetraphosphate analogs towards P2Y1, P2Y12, and P2X1. Methods We synthesized the following Ap4A analogs: P1,P4-dithiotetraphosphate; P2,P3-chloromethylenetetraphosphate; P1-thio-P2,P3-chloromethylenetetraphosphate; and P1,P4-dithio-P2,P3-chloromethylenetetraphosphate. We then measured the effects of these analogs on: (i) ADP-induced platelet aggregation; (ii) P2Y1-mediated changes in cytosolic Ca2+; (iii) P2Y12-mediated changes in vasodilator-stimulated phosphoprotein phosphorylation; and (iv) P2X1-mediated entry of extracellular Ca2+. Results Ap4A analogs with modifications in the phosphate backbone inhibited both P2Y1 and P2Y12, and showed no agonist activity towards these receptors. The dithio modification increased inhibition of P2Y1, P2Y12, and platelet aggregation, whereas the chloromethylene modification increased inhibition of P2Y12 and platelet aggregation, but decreased P2Y1 inhibition. Combining the dithio and chloromethylene modifications increased P2Y1 and P2Y12 inhibition. As compared with Ap4A, each modification decreased agonist activity towards P2X1, and the dual modification completely eliminated P2X1 agonist activity. Conclusions As compared with Ap4A, tetraphosphate backbone analogs of Ap4A have diminished activity towards P2X1 but inhibit both P2Y1 and P2Y12 and, with greater potency, inhibit ADP-induced platelet aggregation. Thus, diadenosine tetraphosphate

Monitoring platelet inhibition after clopidogrel with the VerifyNow-P2Y12(R) rapid analyzer: the VERIfy Thrombosis risk ASsessment (VERITAS) study.

PubMed

Malinin, Alex; Pokov, Alex; Spergling, Malcolm; Defranco, Anthony; Schwartz, Kenneth; Schwartz, Dianne; Mahmud, Ehtisham; Atar, Dan; Serebruany, Victor

2007-01-01

Clopidogrel inhibits platelet P2Y12 ADP receptors, while ADP, as an inductor of aggregation, stimulates both P2Y12 and P2Y1 platelet receptors. Despite a clinical loading dose routine with clopidogrel, some patients still experience coronary stent thrombosis suggesting persistent platelet activation. The VerifyNow-P2Y12 is a rapid assay that test platelet activity over 3 min and uses of the combination of ADP and prostaglandin E1 (PGE1) to directly measure the effects of clopidogrel on the P2Y12 receptor. ADP is used to maximally activate the platelets by binding to the P2Y1 and P2Y12 platelet receptors, while PGE1 is used to suppress the ADP-induced P2Y1-mediated increase in intracellular calcium levels. The VERIfy Thrombosis risk ASsessment (VERITAS) was a prospective study designed to measure platelet response to clopidogrel therapy in subjects with multiple risk factors or history of vascular disease using this novel point-of-care assay. 166 participants were enrolled in 4 participating sites. Data from 147 participants were analyzed after exclusion of 19 patients due to protocol violations. Platelets were assessed twice at baseline (before clopidogrel) and at 24 h post-loading 450 mg (110 participants) or 7 days after chronic clopidogrel treatment (75 mg/day) (37 patients). All participants received aspirin 81-325 mg for at least 2 days before the study enrollment. Results from the VerifyNow-P2Y12 assay are reported in P2Y12 reaction units (PRU). Clopidogrel therapy resulted in a mean 64.0+/-25.3% PRU reduction. No participant reached PRU inhibition below 10% of baseline. Distribution of PRU values for the VerifyNow-P2Y12 assay shows a separation from baseline to post-clopidogrel assay values with some overlap due to high inter-individual variations in response. VerifyNow-P2Y12 is a reliable, fast and sensitive device suitable for monitoring of platelet inhibition during clopidogrel therapy.

Some trends and proposals for the inclusion of sustainability in the design of manufacturing process

NASA Astrophysics Data System (ADS)

Fradinho, J.; Nedelcu, D.; Gabriel-Santos, A.; Gonçalves-Coelho, A.; Mourão, A.

2015-11-01

Production processes are designed to meet requirements of three different natures, quality, cost and time. Environmental concerns have expanded the field of conceptual design through the introduction of sustainability requirements that are driven by the growing societal thoughtfulness about environmental issues. One could say that the major concern has been the definition of metrics or indices for sustainability. However, those metrics usually have some lack of consistency. More than ever, there is a need for an all-inclusive view at any level of decision-making, from the establishing of the design requirements to the implementation of the solutions. According to the Axiomatic Design Theory, sustainable designs are usually coupled designs that should be avoided. This raises a concern related to the very nature of sustainability: the cross effects between the actions that should be considered in the attempt to decouple the design solutions. In terms of production, one should clarify the characterization of the sustainability of production systems. The objectives of this paper are: i) to analyse some trends for approaching the sustainability of the production processes; ii) to define sustainability in terms of requirements for the design of the production processes; iii) to make some proposals based on the Axiomatic Design Theory, in order to establish the principles with which the guidelines for designing production processes must comply; iv) to discuss how to introduce this matter in teaching both manufacturing technology and design of production systems.

[Healthy design for sustainable communities].

PubMed

Capolongo, S; Battistella, A; Buffoli, M; Oppio, A

2011-01-01

Health, quality of life and sustainable development are strongly interconnected. The quality of living is a complex concept that includes different meanings. The quality of life issue has been studied for a long time, even if its measurement is a more recent matter. It's possible to distinguish two main approaches: the first one, depending on which the quality of life corresponds to the social wellbeing and it can be measured objectively; the second one, that emphasizes the perceptive dimension of quality of life, such as needs, feelings and aspirations. According to the WHO's wide definition of wellbeing, this paper suggests an approach focused on the effects that urban planning and designing can have on the health of citizens. Actually many of the problems of the cities like pollution, inequity, lack of services and accessibility depends on decisions about the development of land and buildings. To have more attractive cities in the future it is important that professionals involved in planning and local authorities focus on the major determinants of health: the physical and social environment in which people live and the nature of their lifestyles. The experience explained in this paper shows as local authorities can support professionals in designing process, producing quick and effective benchmark in order to improve the quality of urban spaces and architecture. More in deep the tool works by a set of performance indicators developed with the purpose to assess the degree of sustainability of building and urban space proposals at the planning stage (and at later stages), against a range of criteria. This evaluation procedure can be considered as a common platform from which different stakeholders can agree goals and work together contributing to increase the benefits of a well-designed built environment.

Construction quality assurance report for the Y-12 Construction/Demolition Landfill VII (CDL VII), Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burton, P.M.

This Construction Quality Assurance (CQA) Report provides documentation that Bid Option 2 of the Y-12 Plant Construction Demolition Landfill 7 (CDL-7) was constructed in substantial compliance with the Tennessee Department of Environment and Conservation (TDEC) approved design, as indicated and specified in the permit drawings, approved changes, and specifications. CDL-7 is located in Anderson County on the south side of Chestnut Ridge, approximately 0.5 miles south of the Y-12 Plant in Oak Ridge, Tennessee. This report applies specifically to the limits of excavation for Area No. 1 portions of the perimeter maintenance road and drainage channel and Sedimentation Pond No.more » 3. A partial ``As-Built`` survey was performed and is included.« less

Implementation of sustainable and green design and construction practices for bridges.

DOT National Transportation Integrated Search

2012-12-01

The focus of this research is to develop a framework for more sustainable design and construction : processes for new bridges, and sustainable maintenance practices for existing bridges. The framework : includes a green rating system for bridges. The...

Teaching Sustainable Design Using BIM and Project-Based Energy Simulations

ERIC Educational Resources Information Center

Shen, Zhigang; Jensen, Wayne; Wentz, Timothy; Fischer, Bruce

2012-01-01

The cross-disciplinary nature of energy-efficient building design has created many challenges for architecture, engineering and construction instructors. One of the technical challenges in teaching sustainable building design is enabling students to quantitatively understand how different building designs affect a building's energy performance.…

Y-12 National Security Complex Biological Monitoring And Abatement Program 2008 Calendar Year Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, M. J.; Greeley Jr., M. S.; Mathews, T. J.

2009-07-01

), located off the ORR and below an area of intensive commercial and light industrial development; EFK 13.8, located upstream from the Oak Ridge Wastewater Treatment Facility (ORWTF); and EFK 6.3 located approximately 1.4 km below the ORR boundary (Fig. 1.1). Actual sampling locations on EFPC may differ slightly by task according to specific requirements of the task. Brushy Fork (BF) at kilometer (BFK) 7.6 and Hinds Creek at kilometer (HCK) 20.6 are the most commonly used reference sites for the Y-12 BMAP. Additional sites off the ORR are also occasionally used for reference, including Beaver Creek, Bull Run, Cox Creek, and Paint Rock Creek (Fig. 1.2). Summaries of the sampling designs for the three primary tasks of the Y-12 Complex BMAP for EFPC are presented in Tables 1.1-1.3. This report covers the 2008 period, although data collected outside this time period are included as appropriate. To address the biological monitoring requirements for Bear Creek and McCoy Branch, CERLCA-funded programs, data are summarized in Appendix A and Appendix B respectively. Data for these two watersheds are provided herein to address Section IX of the NPDES Permit for Y-12, where 'Results of these CERCLA programs can be used to meet the biological monitoring requirements of this permit...'. A summary of the toxicity testing results for Y-12 outfalls into upper EFPC is provided in Appendix C (these results have been previously reported) to provide a more thorough perspective of conditions in the stream. Data summarized in this report are available from the Oak Ridge Environmental Information system (OREIS) in an Arc-GIS usable format (http://www-oreis.bechteljacobs.org/oreis/help/oreishome.html). Per requirements specified in the NPDES permit, data collected following TDEC monitoring protocols (TDEC 2006) is also submitted directly to TDEC in Excel format.« less

An Environmental Sustainability Course for Design and Merchandising Students

ERIC Educational Resources Information Center

Cao, Huantian; Frey, Lisa Vogel; Farr, Cheryl A.; Gam, Haejin

2006-01-01

The purpose of this project was to develop a science-based course, "Environmental Sustainability Issues for Designers and Merchandisers". The course emphasis was on scientific concepts underlying textile-related environmental problems; the focus was on the "cradle to cradle" design model as an approach for eliminating environmental problems during…

Embracing Social Sustainability in Design Education: A Reflection on a Case Study in Haiti

ERIC Educational Resources Information Center

Kjøllesdal, Anders; Asheim, Jonas; Boks, Casper

2014-01-01

Sustainable design issues are complex and multi-faceted and need integration in the education of young designers. Current research recommends a holistic view based on problem-solving and inter-disciplinary work, yet few design educators have brought these ideas to their full consequence. Sustainability education for designers is still often rooted…

76 FR 26301 - Decision To Evaluate a Petition To Designate a Class of Employees From the Y-12 Plant in Oak...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-06

... evaluation, is as follows: Facility: Y-12 Plant. Location: Oak Ridge, TN. Job Titles and/or Job Duties: All... Analysis and Support, National Institute for Occupational Safety and Health (NIOSH), 4676 Columbia Parkway...

Sustaining K-12 professional development in geology: Recurrent participation in Rockcamp

USGS Publications Warehouse

Repine, T.E.; Hemler, D.A.; Behling, R.E.

2004-01-01

A reconnaissance study of the geology professional development program known as RockCamp was initiated to examine the sustained, or recurrent, participation of K-12 science teachers. Open-ended interviews, concept mapping, and creative writing assignments were used to explore the perceptions of six teachers possessing an exceptional record of participation. Efficacy, fun, right time of life, and support emerged as unanimous reasons for recurrent participation. Content, friendship, and methodology were very important. College credit was not critical. These teachers' perceptions suggest their sustained involvement in the RockCamp Program is stimulated by situated learning experiences stressing a compare, contrast, connect, and construct pedagogy within a supportive learning community.

Using GREENSCOPE Indicators for Sustainable Computer-Aided Process Evaluation and Design

EPA Science Inventory

Manufacturing sustainability can be increased by educating those who design, construct, and operate facilities, and by using appropriate tools for process evaluation and design. The U.S. Environmental Protection Agency's GREENSCOPE methodology and tool, for evaluation and design ...

Incorporating bioenergy into sustainable landscape designs

DOE PAGES

Dale, Virginia H.; Kline, Keith L.; Buford, Marilyn A.; ...

2015-12-30

In this paper, we describe an approach to landscape design that focuses on integrating bioenergy production with other components of environmental, social and economic systems. Landscape design as used here refers to a spatially explicit, collaborative plan for management of landscapes and supply chains. Landscape design can involve multiple scales and build on existing practices to reduce costs or enhance services. Appropriately applied to a specific context, landscape design can help people assess trade-offs when making choices about locations, types of feedstock, transport, refining and distribution of bioenergy products and services. The approach includes performance monitoring and reporting along themore » bioenergy supply chain. Examples of landscape design applied to bioenergy production systems are presented. Barriers to implementation of landscape design include high costs, the need to consider diverse land-management objectives from a wide array of stakeholders, up-front planning requirements, and the complexity and level of effort needed for successful stakeholder involvement. A landscape design process may be stymied by insufficient data or participation. An impetus for coordination is critical, and incentives may be required to engage landowners and the private sector. In conclusion, devising and implementing landscape designs for more sustainable outcomes require clear communication of environmental, social, and economic opportunities and concerns.« less

Incorporating bioenergy into sustainable landscape designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dale, Virginia H.; Kline, Keith L.; Buford, Marilyn A.

In this paper, we describe an approach to landscape design that focuses on integrating bioenergy production with other components of environmental, social and economic systems. Landscape design as used here refers to a spatially explicit, collaborative plan for management of landscapes and supply chains. Landscape design can involve multiple scales and build on existing practices to reduce costs or enhance services. Appropriately applied to a specific context, landscape design can help people assess trade-offs when making choices about locations, types of feedstock, transport, refining and distribution of bioenergy products and services. The approach includes performance monitoring and reporting along themore » bioenergy supply chain. Examples of landscape design applied to bioenergy production systems are presented. Barriers to implementation of landscape design include high costs, the need to consider diverse land-management objectives from a wide array of stakeholders, up-front planning requirements, and the complexity and level of effort needed for successful stakeholder involvement. A landscape design process may be stymied by insufficient data or participation. An impetus for coordination is critical, and incentives may be required to engage landowners and the private sector. In conclusion, devising and implementing landscape designs for more sustainable outcomes require clear communication of environmental, social, and economic opportunities and concerns.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sherry, T D; Kohlhorst, D P; Little, S K

to resources, including energy/fuel, water, waste, pesticides, and pollution generation; (8) Incorporate sustainable design principles into the design and construction of facility upgrades, new facilities, and infrastructure; and (9) Comply with federal and state regulations, executive orders, and DOE requirements. Y-12 is working to communicate its sustainment vision through procedural, engineering, operational, and management practices. The site will make informed decisions based on the application of the five Guiding Principles for HPSBs to the maximum extent possible.« less

Towards sustainable design for single-use medical devices.

PubMed

Hanson, Jacob J; Hitchcock, Robert W

2009-01-01

Despite their sophistication and value, single-use medical devices have become commodity items in the developed world. Cheap raw materials along with large scale manufacturing and distribution processes have combined to make many medical devices more expensive to resterilize, package and restock than to simply discard. This practice is not sustainable or scalable on a global basis. As the petrochemicals that provide raw materials become more expensive and the global reach of these devices continues into rapidly developing economies, there is a need for device designs that take into account the total life-cycle of these products, minimize the amount of non-renewable materials consumed and consider alternative hybrid reusable / disposable approaches. In this paper, we describe a methodology to perform life cycle and functional analyses to create additional design requirements for medical devices. These types of sustainable approaches can move the medical device industry even closer to the "triple bottom line"--people, planet, profit.

Spatial design principles for sustainable hydropower development in river basins

DOE PAGES

Jager, Henriëtte I.; Efroymson, Rebecca A.; Opperman, Jeff J.; ...

2015-02-27

How can dams be arranged within a river basin such that they benefit society? Recent interest in this question has grown in response to the worldwide trend toward developing hydropower as a source of renewable energy in Asia and South America, and the movement toward removing unnecessary dams in the US. Environmental and energy sustainability are important practical concerns, and yet river development has rarely been planned with the goal of providing society with a portfolio of ecosystem services into the future. We organized a review and synthesis of the growing research in sustainable river basin design around four spatialmore » decisions: Is it better to build fewer mainstem dams or more tributary dams? Should dams be clustered or distributed among distant subbasins? Where should dams be placed along a river? At what spatial scale should decisions be made? We came up with the following design principles for increasing ecological sustainability: (i) concentrate dams within a subset of tributary watersheds and avoid downstream mainstems of rivers, (ii) disperse freshwater reserves among the remaining tributary catchments, (iii) ensure that habitat provided between dams will support reproduction and retain offspring, and (iv) formulate spatial decision problems at the scale of large river basins. Based on our review, we discuss trade-offs between hydropower and ecological objectives when planning river basin development. We hope that future testing and refinement of principles extracted from our review will define a path toward sustainable river basin design.« less

Annual Storm Water Report for the Y-12 National Security Complex Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This is the second annual storm water report prepared in accordance with the National Pollutant Discharge Elimination System (NPDES) permit issued to the Y-12 National Security Complex (Y-12 Complex) on December 1, 2011, and the corresponding Y-12 Storm Water Pollution Prevention Plan (SWP3) which became effective on September 7, 2012. However, Appendix A does contain some analytical data gathered under the previous NPDES permit and SWP3 for comparison purposes. The quality of storm water exiting the Y-12 Complex via East Fork Poplar Creek remained relatively stable from 2012 to 2013. However, there was one largely unexpected high concentration of mercurymore » noted in an area that is not known to have previously been a mercury use area. This was noted in Sector AA, Outfall 014. This outfall is normally sampled on a rotating basis but, due this elevated concentration, will be sampled again in 2014. The Y-12 Complex will continue to implement appropriate BMPs and reduce outside material storage ares where possible. Emphasis will continue to be placed on site inspections and timely implementation of proper storm water control measures.« less

A framework to support decision making in the selection of sustainable drainage system design alternatives.

PubMed

Wang, Mingming; Sweetapple, Chris; Fu, Guangtao; Farmani, Raziyeh; Butler, David

2017-10-01

This paper presents a new framework for decision making in sustainable drainage system (SuDS) scheme design. It integrates resilience, hydraulic performance, pollution control, rainwater usage, energy analysis, greenhouse gas (GHG) emissions and costs, and has 12 indicators. The multi-criteria analysis methods of entropy weight and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) were selected to support SuDS scheme selection. The effectiveness of the framework is demonstrated with a SuDS case in China. Indicators used include flood volume, flood duration, a hydraulic performance indicator, cost and resilience. Resilience is an important design consideration, and it supports scheme selection in the case study. The proposed framework will help a decision maker to choose an appropriate design scheme for implementation without subjectivity. Copyright © 2017 Elsevier Ltd. All rights reserved.

CHARACTERIZATION OF H-Y AND CR-Y ZEOLITE CATALYSTS DURING THE OXIDATIVE DESTRUCTION OF CFC11 AND CFC12

EPA Science Inventory

The long term stability-deactivation characteristics of two Y zeolite catalysts, namely H-Y and cation exchanged Cr-Y, were studied during the oxidative destruction of CFC11 and CFC12 feeds. Experiments were carried out at 300 degrees C and 500 h-1 space velocity. Properties of...

Design and analysis of sustainable computer mouse using design for disassembly methodology

NASA Astrophysics Data System (ADS)

Roni Sahroni, Taufik; Fitri Sukarman, Ahmad; Agung Mahardini, Karunia

2017-12-01

This paper presents the design and analysis of computer mouse using Design for Disassembly methodology. Basically, the existing computer mouse model consist a number of unnecessary part that cause the assembly and disassembly time in production. The objective of this project is to design a new computer mouse based on Design for Disassembly (DFD) methodology. The main methodology of this paper was proposed from sketch generation, concept selection, and concept scoring. Based on the design screening, design concept B was selected for further analysis. New design of computer mouse is proposed using fastening system. Furthermore, three materials of ABS, Polycarbonate, and PE high density were prepared to determine the environmental impact category. Sustainable analysis was conducted using software SolidWorks. As a result, PE High Density gives the lowers amount in the environmental category with great maximum stress value.

The Attitudes of Interior Design Students towards Sustainability

ERIC Educational Resources Information Center

Ruff, Caimen Leigh; Olson, Margot A.

2009-01-01

To measure attitudes toward environmental issues, interior design students responded to a four-part survey: demographics, ecology, sustainability, and comments. The ecology section was composed of modifications of questions from the New Ecological Paradigm Scale (Dunlap et al. "Journal of Environmental Education," 9:10-19, 2000). The researchers…

Design and Construction Documents Associated with N232, Sustainability Base

NASA Technical Reports Server (NTRS)

Zornetzer, Steven F.; Schuler, Raymond F.; Grymes, Rosalind A.

2014-01-01

This request comprehensively covers documents associated with the design and construction of Sustainability Base, N232. The intent of this project specifically envisioned broad dissemination of these materials to others undertaking the design and construction of high-performing energy- and resource-efficient buildings in comparable climate zones.

Sustainability in the Education of Industrial Designers: The Case for Australia

ERIC Educational Resources Information Center

Ramirez, Mariano

2006-01-01

Purpose: The paper intends to determine the extent to which environmental sustainability issues are integrated in the curricula of industrial design programs in Australian universities. Design/methodology/approach: Industrial design lecturers and program heads were invited to participate in a web-based survey on their university's industrial…

Strategies for Developing Sustainable Design Practice for Students and SME Professionals

ERIC Educational Resources Information Center

de Eyto, A.; Mc Mahon, M.; Hadfield, M.; Hutchings, M.

2008-01-01

Designers and engineers seem finally to be awakening to the challenge that sustainable development has given. Educators and students alike are keenly aware of the need to become more effective in the training and practice of their specific disciplines with respect to sustainability. In the past four years since this research has developed, there…

Synthesis design of Y3Al5O12: Ce3+ phosphor for fabrication of ceramic converter in automotive application

NASA Astrophysics Data System (ADS)

Kwon, Seok Bin; Choi, Seung Hee; Yoo, Jung Hyeon; Jeong, Seong Guk; Song, Young Hyun; Yoon, Dae Ho

2018-06-01

A cellulose-assisted, liquid-phase precursor (LPP) was used to synthesize a YAG phosphor radiating near 530 nm with a particle size of 400 nm, which may be implemented in many applications. The mixture of the materials was homogeneous, and the cellulose-assisted LPP method involved a liquid-phase reaction at a lower temperature compared to a solid-state reaction (SSR). The reaction was performed at 1200, 1300 and 1400 °C, and the composition ratio of the samples was controlled based on yttrium (L1: 2.7, L2: 2.8, L3: 2.9, L4: 2.95, and L5: 3.1 M). ∼400 nm particles were obtained at 1200 °C and ∼1 μm at 1300 °C. At 1200 °C, the PL intensity was the highest in the Y3.1Al5O12 sample. At 1300 and 1400 °C, the strongest intensity was evident in the Y2.9Al5O12 sample. The XRD patterns for all temperatures showed a YAG phase in JCPDS.

Crystallization Behavior of A Bulk Amorphous Mg62Cu26Y12 Alloy

NASA Astrophysics Data System (ADS)

Wu, Shyue-Sheng; Chin, Tsung-Shune; Su, Kuo-Chang

1994-07-01

The crystallization temperature, the associated activation energy and the crystallized structure of a bulk amorphous Mg62Cu26Y12 alloy with a diameter of 2.5 mm were studied. It possesses a one-step crystallization behavior. The crystallization reaction was found to be represented by: AM(MG62Cu26Y12)→Mg2Cu+MgY+CuY+Mg, ( Tx=188°C, Eac=134 kJ/mol) where AM represents the amorphous state, T x the crystallization temperature at an infinitesimal heating rate, and E ac the associated activation energy. The amount of crystalline phases were found to be Mg2Cu:MgY:CuY=76:17:7. The Mg phase is identifiable only by high resolution electron microscopy, not by X-ray diffraction. The crystallization leads to a sharp rise in electrical resistivity which is reversed to those of iron-based amorphous alloys.

Arrestin Scaffolds NHERF1 to the P2Y12 Receptor to Regulate Receptor Internalization*

PubMed Central

Nisar, Shaista P.; Cunningham, Margaret; Saxena, Kunal; Pope, Robert J.; Kelly, Eamonn; Mundell, Stuart J.

2012-01-01

We have recently shown in a patient with mild bleeding that the PDZ-binding motif of the platelet G protein-coupled P2Y12 receptor (P2Y12R) is required for effective receptor traffic in human platelets. In this study we show for the first time that the PDZ motif-binding protein NHERF1 exerts a major role in potentiating G protein-coupled receptor (GPCR) internalization. NHERF1 interacts with the C-tail of the P2Y12R and unlike many other GPCRs, NHERF1 interaction is required for effective P2Y12R internalization. In vitro and prior to agonist stimulation P2Y12R/NHERF1 interaction requires the intact PDZ binding motif of this receptor. Interestingly on receptor stimulation NHERF1 no longer interacts directly with the receptor but instead binds to the receptor via the endocytic scaffolding protein arrestin. These findings suggest a novel model by which arrestin can serve as an adaptor to promote NHERF1 interaction with a GPCR to facilitate effective NHERF1-dependent receptor internalization. PMID:22610101

Arrestin scaffolds NHERF1 to the P2Y12 receptor to regulate receptor internalization.

PubMed

Nisar, Shaista P; Cunningham, Margaret; Saxena, Kunal; Pope, Robert J; Kelly, Eamonn; Mundell, Stuart J

2012-07-13

We have recently shown in a patient with mild bleeding that the PDZ-binding motif of the platelet G protein-coupled P2Y(12) receptor (P2Y(12)R) is required for effective receptor traffic in human platelets. In this study we show for the first time that the PDZ motif-binding protein NHERF1 exerts a major role in potentiating G protein-coupled receptor (GPCR) internalization. NHERF1 interacts with the C-tail of the P2Y(12)R and unlike many other GPCRs, NHERF1 interaction is required for effective P2Y(12)R internalization. In vitro and prior to agonist stimulation P2Y(12)R/NHERF1 interaction requires the intact PDZ binding motif of this receptor. Interestingly on receptor stimulation NHERF1 no longer interacts directly with the receptor but instead binds to the receptor via the endocytic scaffolding protein arrestin. These findings suggest a novel model by which arrestin can serve as an adaptor to promote NHERF1 interaction with a GPCR to facilitate effective NHERF1-dependent receptor internalization.

Sustaining Online Teacher Professional Development through Community Design

ERIC Educational Resources Information Center

Henderson, Michael

2007-01-01

Purpose: The purpose of this paper is to explore the role of community of practice in sustaining teachers' participation in a blended (face-to-face and online) professional development course. Design/methodology/approach: A longitudinal multiple-case study methodology was used in researching groups of five teachers in Australia and four teachers…

Recycled Uranium Mass Balance Project Y-12 National Security Complex Site Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2000-12-01

This report has been prepared to summarize the findings of the Y-12 National Security Complex (Y-12 Complex) Mass Balance Project and to support preparation of associated U. S. Department of Energy (DOE) site reports. The project was conducted in support of DOE efforts to assess the potential for health and environmental issues resulting from the presence of transuranic (TRU) elements and fission products in recycled uranium (RU) processed by DOE and its predecessor agencies. The United States government used uranium in fission reactors to produce plutonium and tritium for nuclear weapons production. Because uranium was considered scarce relative to demandmore » when these operations began almost 50 years ago, the spent fuel from U.S. fission reactors was processed to recover uranium for recycling. The estimated mass balance for highly enriched RU, which is of most concern for worker exposure and is the primary focus of this project, is summarized in a table. A discrepancy in the mass balance between receipts and shipments (plus inventory and waste) reflects an inability to precisely distinguish between RU and non-RU shipments and receipts involving the Y-12 Complex and Savannah River. Shipments of fresh fuel (non-RU) and sweetener (also non-RU) were made from the Y-12 Complex to Savannah River along with RU shipments. The only way to distinguish between these RU and non-RU streams using available records is by enrichment level. Shipments of {le}90% enrichment were assumed to be RU. Shipments of >90% enrichment were assumed to be non-RU fresh fuel or sweetener. This methodology using enrichment level to distinguish between RU and non-RU results in good estimates of RU flows that are reasonably consistent with Savannah River estimates. Although this is the best available means of distinguishing RU streams, this method does leave a difference of approximately 17.3 MTU between receipts and shipments. Slightly depleted RU streams received by the Y-12 Complex from

The P2Y(1) and P2Y(12) receptors mediate autoinhibition of transmitter release in sympathetic innervated tissues.

PubMed

Quintas, Clara; Fraga, Sónia; Gonçalves, Jorge; Queiroz, Glória

2009-12-01

In the sympathetic nervous system, ATP is a co-transmitter and modulator of transmitter release, inhibiting noradrenaline release by acting on P2Y autoreceptors, but in peripheral tissues the subtypes involved have only scarcely been identified. We investigated the identity of the noradrenaline release-inhibiting P2Y subtypes in the epididymal portion of vas deferens and tail artery of the rat. The subtypes operating as autoreceptors, the signalling mechanism and cross-talk with alpha(2)-autoreceptors, was also investigated in the epididymal portion. In both tissues, the nucleotides 2-methylthioATP, 2-methylthioADP, ADP and ATP inhibited noradrenaline release up to 68%, with the following order of potency: 2-methylthioADP=2-methylthioATP>ADP=ATP in the epididymal portion and 2-methylthioADP=2-methylthioATP=ADP>ATP in the tail artery. The selective P2Y(1) antagonist 2'-deoxy-N(6)-methyladenosine 3',5'-bisphosphate (30microM) and the P2Y(12) antagonist 2,2-dimethyl-propionic acid 3-(2-chloro-6-methylaminopurin-9-yl)-2-(2,2-dimethyl-propionyloxymethyl)-propyl ester (30microM) increased noradrenaline release per se by 25+/-8% and 18+/-3%, respectively, in the epididymal portion but not in tail artery. Both antagonists attenuated the effect of nucleotides in the epididymal portion whereas in tail artery only the P2Y(1) antagonist was effective. The agonist of P2Y(1) and P2Y(12) receptors, 2-methylthioADP, caused an inhibition of noradrenaline release that was not prevented by inhibition of phospholipase C or protein kinase C but was abolished by pertussis toxin. 2-methylthioADP and the adenosine A(1) receptor agonist N(6)-cyclopentyladenosine were less potent at inhibiting noradrenaline release under marked influence of alpha(2)-autoinhibition. In both tissues, nucleotides modulate noradrenaline release by activation of inhibitory P2Y(1) receptors but in the epididymal portion P2Y(12) receptors also participate. P2Y(1) and P2Y(12) receptors are coupled to G

A slow fashion design model for bluejeans using house of quality approach

NASA Astrophysics Data System (ADS)

Nergis, B.; Candan, C.; Sarısaltık, S.; Seneloglu, N.; Bozuk, R.; Amzayev, K.

2017-10-01

The purpose of this study was to develop a slow fashion design model using the house of quality model (HOQ) to provide fashion designers a tool to improve the overall sustainability of denim jeans for Y generation consumers in Turkish market. In doing so, a survey was conducted to collect data on the design & performance expectations as well as the perception of slow fashion in design process of denim jeans of the targeted consumer group. The results showed that Y generation in the market gave the most importance to the sustainable production techniques when identifying slow fashion.

History of mercury use and environmental contamination at the Oak Ridge Y-12 Plant.

PubMed

Brooks, Scott C; Southworth, George R

2011-01-01

Between 1950 and 1963 approximately 11 million kilograms of mercury (Hg) were used at the Oak Ridge Y-12 National Security Complex (Y-12 NSC) for lithium isotope separation processes. About 3% of the Hg was lost to the air, soil and rock under facilities, and East Fork Poplar Creek (EFPC) which originates in the plant site. Smaller amounts of Hg were used at other Oak Ridge facilities with similar results. Although the primary Hg discharges from Y-12 NSC stopped in 1963, small amounts of Hg continue to be released into the creek from point sources and diffuse contaminated soil and groundwater sources within Y-12 NSC. Mercury concentration in EFPC has decreased 85% from ∼2000 ng/L in the 1980s. In general, methylmercury concentrations in water and in fish have not declined in response to improvements in water quality and exhibit trends of increasing concentration in some cases. Published by Elsevier Ltd.

The empowerment of sustainable design in food packaging as designer responsibilities

NASA Astrophysics Data System (ADS)

Setiadi, V.

2018-01-01

The purpose of this paper is emphasized on the empowerment of sustainable design in providing the dual function of a food packaging. Which can extend the life of paper, cardboard, plastic, aluminum foil so as to reduce the contribution of waste on earth. The methodology used in this research is using qualitative research. With the main approach taken on the layout of the packaging design, the approach that relies heavily on the data in the form of packaging design. For the process of observation, the authors should compare with the forms of food packaging designs that are contained in the diversity of food packaging types from products outside Indonesia. The purpose of this study is also intended as a recommendation through observation of data interviews and survey related products. Conclusion through material exploration, packaging structure exploration, efficient exploration of ink usage and packaging usage patterns.

An approach to quantitative sustainability assessment in the early stages of process design.

PubMed

Tugnoli, Alessandro; Santarelli, Francesco; Cozzani, Valerio

2008-06-15

A procedure was developed for the quantitative assessment of key performance indicators suitable for the sustainability analysis of alternative processes, mainly addressing the early stages of process design. The methodology was based on the calculation of a set of normalized impact indices allowing a direct comparison of the additional burden of each process alternative on a selected reference area. Innovative reference criteria were developed to compare and aggregate the impact indicators on the basis of the site-specific impact burden and sustainability policy. An aggregation procedure also allows the calculation of overall sustainability performance indicators and of an "impact fingerprint" of each process alternative. The final aim of the method is to support the decision making process during process development, providing a straightforward assessment of the expected sustainability performances. The application of the methodology to case studies concerning alternative waste disposal processes allowed a preliminary screening of the expected critical sustainability impacts of each process. The methodology was shown to provide useful results to address sustainability issues in the early stages of process design.

The Influence of Older Age Groups to Sustainable Product Design Research of Urban Public Facilities

NASA Astrophysics Data System (ADS)

Wen-juan, Zhang; Hou-peng, Song

2017-01-01

Through summarize the status quo of public facilities design to older age groups in China and a variety of factors what influence on them, the essay, from different perspective, is designed to put forward basic principle to sustainable design of public facilities for the aged in the city, and thus further promote and popularize the necessity of sustainable design applications in the future design of public facilities for elderly people.

Second report on the Oak Ridge Y-12 Plant Biological Monitoring and Abatement Program for East Fork Poplar Creek

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinzman, R.L.; Adams, S.M.; Black, M.C.

1993-06-01

As stipulated in the National Pollutant Discharge Elimination System (NDPES) permit issued to the Oak Ridge Y-12 Plant on May 24, 1986, a Biological Monitoring and Abatement Program (BMAP) was developed for the receiving stream, East Fork Poplar Creek (EFPC). The objectives of BMAP are (1) to demonstrate that the current effluent limitations established for the Y-12 Plant protect the classified uses of EFPC (e.g., the growth and propagation of fish and aquatic life), as designated by the Tennessee Department of Environment and Conservation (TDEC) and (2) to document the ecological effects resulting from implementation of a Water Pollution Controlmore » Program that includes construction of several large wastewater treatment facilities. BMAP consists of four major tasks: (1) ambient toxicity testing; (2) bioaccumulation studies; (3) biological indicator studies; and (4) ecological surveys of stream communities, including periphyton (attached algae), benthic (bottom-dwelling) macroinvertebrates, and fish. This document, the second in a series of reports on the results of the Y-12 Plant BMAP, describes studies that were conducted between July 1986 and July 1988, although additional data collected outside this time period are included, as appropriate.« less

First report on the Oak Ridge Y-12 Plant Biological Monitoring and Abatement Program for East Fork Poplar Creek

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loar, J.M.; Adams, S.M.; Allison, L.J.

1992-07-01

As stipulated in the National Pollutant Discharge Elimination System (NPDES) permit issued to the Oak Ridge Y-12 Plant on May 24, 1985, a Biological Monitoring and Abatement Program (BMAP) was developed for the receiving stream, East Fork Poplar Creek (EFPC). The objectives of the BMAP are (1) to demonstrate that the current effluent limitations established for the Oak Ridge Y-12 Plant protect the uses of EFPC (e.g., the growth and propagation of fish and aquatic life), as designated by the Tennessee Department of Environment and Conservation (TDEC) [formerly the Tennessee Department of Health and Environment (TDHE)], and (2) to documentmore » the ecological effects resulting from implementation of a water pollution control program that includes construction of several large wastewater treatment facilities. The BMAP consists of four major tasks: (1) ambient toxicity testing, (2) bioaccumulation studies, (3) biological indicator studies, and (4) ecological surveys of stream communities, including periphyton (attached algae), benthic macroinvertebrates, and fish. This document, the first in a series of reports on the results of the Y-12 Plant BMAP, describes studies that were conducted from May 1985 through September 1986.« less

Flow Chemistry for Designing Sustainable Chemical Synthesis (journal article)

EPA Science Inventory

An efficiently designed continuous flow chemical process can lead to significant advantages in developing a sustainable chemical synthesis or process. These advantages are the direct result of being able to impart a higher degree of control on several key reactor and reaction par...

Agonist and antagonist effects of diadenosine tetraphosphate, a platelet dense granule constituent, on platelet P2Y1, P2Y12 and P2X1 receptors.

PubMed

Chang, Hung; Yanachkov, Ivan B; Michelson, Alan D; Li, YouFu; Barnard, M R; Wright, George E; Frelinger, Andrew L

2010-02-01

Diadenosine 5',5'''-P(1),P(4)- tetraphosphate (Ap(4)A) is stored in platelet dense granules, but its effects on platelet function are not well understood. We examined the effects of Ap(4)A on platelet purinergic receptors P2Y(1), P2Y(12) and P2X(1). Flow cytometry was used to measure the effects of Ap(4)A in the presence or absence of ADP on: a) P2Y(12)-mediated decrease in intraplatelet phosphorylated vasodilator stimulated phosphoprotein (VASP), b) P2Y(1)-mediated increase in platelet cytosolic Ca(2+), and c) P2X(1)-mediated intraplatelet entry of extracellular Ca(2+). ADP-stimulated platelet shape change (P2Y(1)-mediated) and aggregation (P2Y(1)- and P2Y(12)-mediated) were measured optically. Ap(4)A inhibited 3 microM ADP-induced: a) platelet aggregation (IC(50) 9.8+/-2.8 microM), b) P2Y(1)-mediated shape change, c) P2Y(1)-mediated increase in platelet cytosolic Ca(2+) (IC(50) 40.8+/-12.3 microM), and d) P2Y(12)-mediated decrease in VASP phosphorylation (IC(50)>250 microM). In the absence of added ADP, Ap(4)A had agonist effects on platelet P2X(1) and P2Y(12), but not P2Y(1), receptors. Ap(4)A, a constituent of platelet dense granules, is a) an antagonist of platelet P2Y(1) and P2Y(12) receptors, where it inhibits the effects of ADP, and b) an agonist of platelet P2X(1) and P2Y(12) receptors. Copyright 2009 Elsevier Ltd. All rights reserved.

Agonist and Antagonist Effects of Diadenosine Tetraphosphate, a Platelet Dense Granule Constituent, on Platelet P2Y1, P2Y12 and P2X1 Receptors

PubMed Central

Chang, Hung; Yanachkov, Ivan B.; Michelson, Alan D.; Li, YouFu; Barnard, M.R.; Wright, George E.; Frelinger, Andrew L.

2010-01-01

Introduction Diadenosine 5',5"'-P1,P4-tetraphosphate (Ap4A) is stored in platelet dense granules, but its effects on platelet function are not well understood. Methods and Results We examined the effects of Ap4A on platelet purinergic receptors P2Y1, P2Y12 and P2X1. Flow cytometry was used to measure the effects of Ap4A in the presence or absence of ADP on: a) P2Y12-mediated decrease in intraplatelet phosphorylated vasodilator stimulated phosphoprotein (VASP), b) P2Y1-mediated increase in platelet cytosolic Ca2+, and c) P2X1-mediated intraplatelet entry of extracellular Ca2+. ADP-stimulated platelet shape change (P2Y1-mediated) and aggregation (P2Y1- and P2Y12-mediated) were measured optically. Ap4A inhibited 3 µM ADP-induced: a) platelet aggregation (IC50 9.8 ± 2.8 µM), b) P2Y1-mediated shape change, c) P2Y1-mediated increase in platelet cytosolic Ca2+ (IC50 40.8 ± 12.3 µM), and d) P2Y12-mediated decrease in VASP phosphorylation (IC50 >250 µM). In the absence of added ADP, Ap4A had agonist effects on platelet P2X1 and P2Y12, but not P2Y1, receptors. Conclusion Ap4A, a constituent of platelet dense granules, is a) an antagonist of platelet P2Y1 and P2Y12 receptors, where it inhibits the effects of ADP, and b) an agonist of platelet P2X1 and P2Y12 receptors. PMID:19945153

Sustainability in the Architectural Design Studio: A Case Study of Designing On-Campus Academic Staff Housing in Konya and Izmir, Turkey

ERIC Educational Resources Information Center

Bala, Havva Alkan

2010-01-01

It is important to engender a "sustainable" architectural consciousness in the students who will be the next generation architects. In architectural education, design decisions taken during the early phases of the design process play an important role in ensuring concern for the sustainability issue. But, in general, all discussions…

Sustainable and responsible design from a Christian worldview.

PubMed

Eisenbarth, Steven R; Van Treuren, Kenneth W

2004-04-01

Many aspects of design require engineers to make choices based on non-quantifiable personal perspectives. These decisions touch issues in aesthetics, ethics, social impact, and responsibility and sustainability. Part of Baylor University's mission is to provide a learning community in which Christian life values and worldviews might be integrated into academic disciplines. In view of this institutional commitment, members of the Engineering faculty are investigating how Christian worldviews might interact with elements of engineering design in such a way as to produce uniquely Christian insights and inform the non-quantifiable aspects of the engineering process.

The Sustainable Expression of Ecological Concept in the Urban Landscape Environment Design

NASA Astrophysics Data System (ADS)

Dong, Junyan; Zhou, Tiejun; Xin, Lisen; Tan, Yuetong; Wang, Zhigang

2018-02-01

Urbanization is an inevitable trend of development of human society, also the inevitable outcome of economic development and scientific and technological progress, while urbanization process in promoting the development of human civilization, also no doubt, urban landscape has been a corresponding impact. Urban environment has suffered unprecedented damage, the urban population density, traffic congestion, shortage of resources, environmental pollution, ecological degradation, has become the focus of human society. In order to create an environment of ecological and harmonious, beautiful, sustainable development in the urban landscape, This paper discusses the concept of ecological design combined with the urban landscape design and sustainable development of urban landscape design.

What Current Literature Tells Us about Sustainable Diets: Emerging Research Linking Dietary Patterns, Environmental Sustainability, and Economics12

PubMed Central

Auestad, Nancy; Fulgoni, Victor L

2015-01-01

The concept of sustainable diets, although not new, is gaining increased attention across the globe, especially in relation to projected population growth and growing concerns about climate change. As defined by the FAO (Proceedings of the International Scientific Symposium, Biodiversity and Sustainable Diets 2010; FAO 2012), “Sustainable diets are those diets with low environmental impacts which contribute to food and nutrition security and to healthy life for present and future generations.” Consistent and credible science that brings together agriculture, food systems, nutrition, public health, environment, economics, culture, and trade is needed to identify synergies and trade-offs and to inform guidance on vital elements of healthy, sustainable diets. The aim of this article is to review the emerging research on environmental and related economic impacts of dietary patterns, including habitual eating patterns, nutritionally balanced diets, and a variety of different dietary scenarios. Approaches to research designs, methodologies, and data sources are compared and contrasted to identify research gaps and future research needs. To date, it is difficult to assimilate all of the disparate approaches, and more concerted efforts for multidisciplinary studies are needed. PMID:25593141

New concept of aging care architecture landscape design based on sustainable development

NASA Astrophysics Data System (ADS)

Xu, Ying

2017-05-01

As the aging problem becoming serious in China, Aging care is now one of the top issuer in front of all of us. Lots of private and public aging care architecture and facilities have been built. At present, we only pay attention to the architecture design and interior design scientific, ecological and sustainable design on aged care architecture landscape. Based on the social economy, population resources, mutual coordination and development of the environment, taking the elderly as the special group, this paper follows the principles of the sustainable development, conducts the comprehensive design planning of aged care landscape architecture and makes a deeper understanding and exploration through changing the form of architectural space, ecological landscape planting, new materials and technology, ecological energy utilization.

Vernacular design based on sustainable disaster's mitigation communication and education strategy

NASA Astrophysics Data System (ADS)

Mansoor, Alvanov Zpalanzani

2015-04-01

Indonesia is located between three active tectonic plates, which are prone to natural disasters such as earthquake, volcanic eruption, and also giant tidal wave-tsunami. Adequate infrastructure plays an important role in disaster mitigation, yet without good public awareness, the mitigation process won't be succeeded. The absence of awareness can lead to infrastructure mistreatment. Several reports on lack of understanding or misinterpretation of disaster mitigation especially from rural and coastal communities need to be solved, especially from communication aspects. This is an interdisciplinary study on disaster mitigation communication design and education strategy from visual communication design studies paradigm. This paper depicts research results which applying vernacular design base to elaborate sustainable mitigation communication and education strategy on various visual media and social campaigns. This paper also describes several design approaches which may becomes way to elaborate sustainable awareness and understanding on disaster mitigation among rural and coastal communities in Indonesia.

The Finnish Five-String Kantele: Sustainably Designed for Musical Joy

ERIC Educational Resources Information Center

Ruokonen, Inkeri; Sepp, Anu; Moilanen, Venla; Autio, Ossi; Ruismaki, Heikki

2014-01-01

This article discusses the five-string kantele as an example of the Finnish national heritage, a school instrument and an example of sustainable design. A qualitative case study was made by collecting the data from the Finnish students--prospective teachers--and the sixth form pupils, who had designed and carved their own five-string kanteles. The…

Brownfields Recommendations for Sustainable Site Design — Green Landscape Plan

EPA Pesticide Factsheets

The assessment of conditions contained in this report focuses on site-specific environmental and soil conditions that might affect recommendations related to sustainable landscaping and site design, stormwater management, and stormwater reuse.

Designing a Maintainable and Sustainable Coast Guard Icebreaker for Arctic and Antarctic Operations

DTIC Science & Technology

2014-03-21

03-2014 Technical June 2013-August 2013 Designing a Maintainable and Sustainable Coast Guard Icebreaker for Arctic and Antarctic Operations...of Engineering Designing a Maintainable and Sustainable Coast Guard Icebreaker for Arctic and Antarctic Operations Abstract The U.S. Coast Guard is...Pollution (MARPOL) of which Annex V prohibits the discharge of solid waste other than food refuge less than 25mm in diameter into the Antarctic Region [6

Investigation of Y6Mn23 and YMn12 intermetallic alloys under high hydrogen pressure

NASA Astrophysics Data System (ADS)

Filipek, S. M.; Sato, R.; Kuriyama, N.; Tanaka, H.; Takeichi, N.

2010-03-01

Among three intermetallic compounds existing in Y-Mn system the YMn2 and Y6Mn23 can easily form interstitial hydrides while for YMn12 existence of hydride has never been reported. At moderate hydrogen pressure YMn2 and Y6Mn23 transform into YMn2H4.5 and Y6Mn23H25 respectively. At high hydrogen pressure the YMn2 (C15 or C14 parent structure) forms a unique YMn2H6 (s.g. Fm3m) complex hydride of fluorite structure in which one Mn atom Mn(1) and Y randomly occupy the 8c sites while second manganese (Mn2) in position 4a forms complex anion with 6 hydrogen atoms located in positions 24e. Formation of YMn2H6 independently of the structure of parent phase (C14 or C15) as well as occupation of the same site (8c) by Y and Mn(1) atoms suggested that also Y6Mn23 and YMn12 could transform into YMn2H6 - type hydride in which suitable number of Y atoms will be substituted by Mn(1) in the 8c positions. This assumption was confirmed by exposing R6Mn23 and RMn12 to 1 GPa of hydrogen pressure at 1000C. Formation of (RxMn2-x)MnH6 (where x = 18/29 or 3/13 for R6Mn23 and RMn12 hydrides respectively) was confirmed by XRD. Hydrogen concentration in both R6Mn23 and RMn12 based hydrides reached H/Me = 2 thus value two times higher than in R6Mn23H25.

Identification of Determinants Required for Agonistic and Inverse Agonistic Ligand Properties at the ADP Receptor P2Y12

PubMed Central

Schmidt, Philipp; Ritscher, Lars; Dong, Elizabeth N.; Hermsdorf, Thomas; Cöster, Maxi; Wittkopf, Doreen; Meiler, Jens

2013-01-01

The ADP receptor P2Y12 belongs to the superfamily of G protein–coupled receptors (GPCRs), and its activation triggers platelet aggregation. Therefore, potent antagonists, such as clopidogrel, are of high clinical relevance in prophylaxis and treatment of thromboembolic events. P2Y12 displays an elevated basal activity in vitro, and as such, inverse agonists may be therapeutically beneficial compared with antagonists. Only a few inverse agonists of P2Y12 have been described. To expand this limited chemical space and improve understanding of structural determinants of inverse agonist-receptor interaction, this study screened a purine compound library for lead structures using wild-type (WT) human P2Y12 and 28 constitutively active mutants. Results showed that ATP and ATP derivatives are agonists at P2Y12. The potency at P2Y12 was 2-(methylthio)-ADP > 2-(methylthio)-ATP > ADP > ATP. Determinants required for agonistic ligand activity were identified. Molecular docking studies revealed a binding pocket for the ATP derivatives that is bordered by transmembrane helices 3, 5, 6, and 7 in human P2Y12, with Y105, E188, R256, Y259, and K280 playing a particularly important role in ligand interaction. N-Methyl-anthraniloyl modification at the 3′-OH of the 2′-deoxyribose leads to ligands (mant-deoxy-ATP [dATP], mant-deoxy-ADP) with inverse agonist activity. Inverse agonist activity of mant-dATP was found at the WT human P2Y12 and half of the constitutive active P2Y12 mutants. This study showed that, in addition to ADP and ATP, other ATP derivatives are not only ligands of P2Y12 but also agonists. Modification of the ribose within ATP can result in inverse activity of ATP-derived ligands. PMID:23093496

A Digital Methodology for the Design Process of Aerospace Assemblies with Sustainable Composite Processes & Manufacture

NASA Astrophysics Data System (ADS)

McEwan, W.; Butterfield, J.

2011-05-01

The well established benefits of composite materials are driving a significant shift in design and manufacture strategies for original equipment manufacturers (OEMs). Thermoplastic composites have advantages over the traditional thermosetting materials with regards to sustainability and environmental impact, features which are becoming increasingly pertinent in the aerospace arena. However, when sustainability and environmental impact are considered as design drivers, integrated methods for part design and product development must be developed so that any benefits of sustainable composite material systems can be assessed during the design process. These methods must include mechanisms to account for process induced part variation and techniques related to re-forming, recycling and decommissioning, which are in their infancy. It is proposed in this paper that predictive techniques related to material specification, part processing and product cost of thermoplastic composite components, be integrated within a Through Life Management (TLM) product development methodology as part of a larger strategy of product system modeling to improve disciplinary concurrency, realistic part performance, and to place sustainability at the heart of the design process. This paper reports the enhancement of digital manufacturing tools as a means of drawing simulated part manufacturing scenarios, real time costing mechanisms, and broader lifecycle performance data capture into the design cycle. The work demonstrates predictive processes for sustainable composite product manufacture and how a Product-Process-Resource (PPR) structure can be customised and enhanced to include design intent driven by `Real' part geometry and consequent assembly. your paper.

An intact PDZ motif is essential for correct P2Y12 purinoceptor traffic in human platelets.

PubMed

Nisar, Shaista; Daly, Martina E; Federici, Augusto B; Artoni, Andrea; Mumford, Andrew D; Watson, Stephen P; Mundell, Stuart J

2011-11-17

The platelet P2Y(12) purinoceptor (P2Y(12)R), which plays a crucial role in hemostasis, undergoes internalization and subsequent recycling to maintain receptor responsiveness, processes that are essential for normal platelet function. Here, we observe that P2Y(12)R function is compromised after deletion or mutation of the 4 amino acids at the extreme C-terminus of this receptor (ETPM), a putative postsynaptic density 95/disc large/zonula occludens-1 (PDZ)-binding motif. In cell line models, removal of this sequence or mutation of one of its core residues (P341A), attenuates receptor internalization and receptor recycling back to the membrane, thereby blocking receptor resensitization. The physiologic significance of these findings in the regulation of platelet function is shown by identification of a patient with a heterozygous mutation in the PDZ binding sequence of their P2Y(12)R (P341A) that is associated with reduced expression of the P2Y(12)R on the cell surface. Importantly, platelets from this subject showed significantly compromised P2Y(12)R recycling, emphasizing the importance of the extreme C-terminus of this receptor to ensure correct receptor traffic.

Principals' Perspectives on Designing, Implementing, and Sustaining a Professional Learning Community: A Qualitative Study

ERIC Educational Resources Information Center

Bozzini, Michelle D.

2017-01-01

This qualitative study explored how elementary school principals design, implement, and sustain high quality professional development through the use of professional learning communities (PLCs) in order to enhance teaching and learning. The researcher revealed the principal's important role in the design, implementation, and sustainability of a…

12 CFR 1024.1 - Designation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Designation. 1024.1 Section 1024.1 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION REAL ESTATE SETTLEMENT PROCEDURES ACT (REGULATION X) § 1024.1 Designation. This part, known as Regulation X, is issued by the Bureau of Consumer Financial...

12 CFR 1024.1 - Designation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Designation. 1024.1 Section 1024.1 Banks and Banking BUREAU OF CONSUMER FINANCIAL PROTECTION REAL ESTATE SETTLEMENT PROCEDURES ACT (REGULATION X) § 1024.1 Designation. This part, known as Regulation X, is issued by the Bureau of Consumer Financial...

Gene-by-environment effect of house dust mite on purinergic receptor P2Y12 (P2RY12) and lung function in children with asthma.

PubMed

Bunyavanich, S; Boyce, J A; Raby, B A; Weiss, S T

2012-02-01

Distinct receptors likely exist for leukotriene (LT)E(4), a potent mediator of airway inflammation. Purinergic receptor P2Y12 is needed for LTE(4)-induced airways inflammation, and P2Y12 antagonism attenuates house dust mite-induced pulmonary eosinophilia in mice. Although experimental data support a role for P2Y12 in airway inflammation, its role in human asthma has never been studied. To test for association between variants in the P2Y12 gene (P2RY12) and lung function in human subjects with asthma, and to examine for gene-by-environment interaction with house dust mite exposure. Nineteen single nucleotide polymorphisms (SNPs) in P2RY12 were genotyped in 422 children with asthma and their parents (n = 1266). Using family based methods, we tested for associations between these SNPs and five lung function measures. We performed haplotype association analyses and tested for gene-by-environment interactions using house dust mite exposure. We used the false discovery rate to account for multiple comparisons. Five SNPs in P2RY12 were associated with multiple lung function measures (P-values 0.006–0.025). Haplotypes in P2RY12 were also associated with lung function (P-values 0.0055–0.046). House dust mite exposure modulated associations between P2RY12 and lung function, with minor allele homozygotes exposed to house dust mite demonstrating worse lung function than those unexposed (significant interaction P-values 0.0028–0.040). The P2RY12 variants were associated with lung function in a large family-based asthma cohort. House dust mite exposure caused significant gene-by-environment effects. Our findings add the first human evidence to experimental data supporting a role for P2Y12 in lung function. P2Y12 could represent a novel target for asthma treatment.

Brownfields Green Avenue Sites: Technical Memorandum - Conceptual Design for Sustainable Redevelopment

EPA Pesticide Factsheets

This technical memorandum briefly describes the site and proposed conceptual site plan, indicates conceptual design considerations, specifies recommended green and sustainable features, and offers other recommendations

A Systematic Method of Integrating BIM and Sensor Technology for Sustainable Construction Design

NASA Astrophysics Data System (ADS)

Liu, Zhen; Deng, Zhiyu

2017-10-01

Building Information Modeling (BIM) has received lots of attention of construction field, and sensor technology was applied in construction data collection. This paper developed a method to integrate BIM and sensor technology for sustainable construction design. A brief literature review was conducted to clarify the current development of BIM and sensor technology; then a systematic method for integrating BIM and sensor technology to realize sustainable construction design was put forward; finally a brief discussion and conclusion was given.

Multiscale design and life-cycle based sustainability assessment of polymer nanocomposite coatings

NASA Astrophysics Data System (ADS)

Uttarwar, Rohan G.

In recent years, nanocoatings with exceptionally improved and new performance properties have found numerous applications in the automotive, aerospace, ship-making, chemical, electronics, steel, construction, and many other industries. Especially the formulations providing multiple functionalities to cured paint films are believed to dominate the coatings market in the near future. It has shifted the focus of research towards building sustainable coating recipes which can deliver multiple functionalities through applied films. The challenge to this exciting area of research arrives from the insufficient knowledge about structure-property correlations of nanocoating materials and their design complexity. Experimental efforts have been successful in developing certain types of nanopaints exhibiting improved properties. However, multifunctional nanopaint design optimality is extremely difficult to address if not impossible solely through experiments. In addition to this, the environmental implications and societal risks associated with this growing field of nanotechnology raise several questions related to its sustainable development. This research focuses on the study of a multiscale sustainable nanocoating design which can have the application from novel function envisioning and idea refinement point of view, to knowledge discovery and design solution derivation, and further to performance testing in industrial applications. The nanocoating design is studied using computational simulations of nano- to macro- scale models and sustainability assessment study over the life-cycle. Computational simulations aim at integrating top-down, goals/means, inductive systems engineering and bottom-up, cause and effect, deductive systems engineering approaches for material development. The in-silico paint resin system is a water-dispersible acrylic polymer with hydrophilic nanoparticles incorporated into it. The nano-scale atomistic and micro-scale coarse-grained (CG) level

Calendar Year 2007 Groundwater Monitoring Report, U.S. Department of Energy Y-12 National Security Complex, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elvado Environmental LLC

2008-12-01

This report contains the groundwater and surface water monitoring data that were obtained during calendar year (CY) 2007 at the U.S. Department of Energy (DOE) Y-12 National Security Complex (hereafter referenced as Y-12) on the DOE Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee. The CY 2007 monitoring data were obtained from wells, springs, and surface water sampling locations in three hydrogeologic regimes at Y-12 (Figure A.1). The Bear Creek Hydrogeologic Regime (Bear Creek Regime) encompasses a section of Bear Creek Valley (BCV) between the west end of Y-12 and the west end of the Bear Creek Watershed (directions aremore » in reference to the Y-12 grid system). The Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime) encompasses the Y-12 industrial facilities and support structures in BCV. The Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime) encompasses a section of Chestnut Ridge directly south of Y-12. Section 2 of this report provides background information pertinent to groundwater and surface water quality monitoring in each hydrogeologic regime, including the topography and bedrock geology, surface water drainage, groundwater system, and extent of groundwater contamination. The CY 2007 groundwater and surface water monitoring data in this report were obtained from sampling and analysis activities implemented under the Y-12 Groundwater Protection Program (GWPP) managed by BWXT Y-12, L.L.C. (BWXT), and from sampling and analysis activities implemented under several monitoring programs managed by Bechtel Jacobs Company LLC (BJC). In December 2007, the BWXT corporate name was changed to Babcock & Wilcox Technical Services Y-12, LLC (B&W Y-12), which is applied to personnel and organizations throughout CY 2007 for this report. Cooperative implementation of the monitoring programs directed by the Y-12 GWPP and BJC (i.e., coordinating sample collection and sharing data) ensures that the CY 2007 monitoring results fulfill

Groundwater Protection Program Management Plan For The U.S. Department Of Energy Y-12 National Security Complex, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elvado Environmental, LLC

2009-09-01

This document presents the Groundwater Protection Program (GWPP) management plan for the U.S. Department of Energy (DOE) Y-12 National Security Complex (hereafter referenced as Y-12). The Y-12 GWPP functions as the primary point-of-contact for groundwater-related issues at Y-12, provides stewardship of the extensive network of groundwater monitoring wells at Y-12, and serves as a resource for technical expertise, support, and historical data for groundwater-related activities at Y-12. These organizational functions each serve the primary programmatic purpose of the GWPP, which is to ensure that groundwater monitoring activities within areas under Y-12 administrative control provide representative data in compliance with themore » multiple purposes of applicable state and federal regulations, DOE orders, and the corporate policies of Babcock & Wilcox Technical Services Y-12 LLC (hereafter referenced as B&W Y-12), the Y-12 management and operations (M&O) contractor for DOE. B&W Y-12 is a new corporate name, assumed in January 2007, for the company formerly known as BWXT Y-12, L.L.C., hereafter referenced as BWXT. This GWPP management plan addresses the requirements of DOE Order 450.1A Environmental Protection Program (hereafter referenced as DOE O 450.1A), which emphasize a site-wide approach for groundwater protection at each DOE facility through implementation of groundwater surveillance monitoring. Additionally, this plan addresses the relevant and applicable GWPP elements and goals described in the DOE O 450.1A technical guidance documents issued in June 2004 (DOE 2004) and May 2005 (DOE 2005). This GWPP management plan is a 'living' document that is reviewed annually, revised and reissued every three years, and is formatted to provide for updating individual sections independent of the rest of the document. Section 2 includes a short description of the groundwater system at Y-12, the history of groundwater monitoring at Y-12 and the corresponding evolution of

Building Evidence for Sustainability of Food and Nutrition Intervention Programs in Developing Countries12

PubMed Central

Kim, Sunny S.; Rogers, Beatrice L.; Coates, Jennifer; Gilligan, Daniel O.; Sarriot, Eric

2013-01-01

After making large investments to put in place effective health and nutrition interventions, researchers, program implementers, policy makers, and donors all expect lasting effects. However, it is uncertain whether this is the case, and there is less certainty on how to approach the study of program sustainability. This symposium, “Building Evidence for Sustainability of Food and Nutrition Intervention Programs in Developing Countries,” provided not only frameworks for conceptualizing sustainability but concrete evidence about the approaches and methods used as well as lessons on how they do or do not work in particular contexts. We presented the following findings: 1) sustainability of activities and impacts of Title II food aid programs in Bolivia and Kenya, 2) sustainability of impact in terms of adoption and consumption of a biofortified orange sweet potato in Uganda, and 3) lessons from incorporating pro-sustainability investment strategies in child survival programs in Guinea. Our symposium introduced a new important body of research on program sustainability to provide insights and stimulate innovative thinking in the design and planning of further applied research and future prosustainability intervention programs. PMID:24038245

Inhibitory Effect of Flavonolignans on the P2Y12 Pathway in Blood Platelets.

PubMed

Bijak, Michal; Szelenberger, Rafal; Dziedzic, Angela; Saluk-Bijak, Joanna

2018-02-10

Adenosine diphosphate (ADP) is the major platelet agonist, which is important in the shape changes, stability, and growth of the thrombus. Platelet activation by ADP is associated with the G protein-coupled receptors P2Y1 and P2Y12. The pharmacologic blockade of the P2Y12 receptor significantly reduces the risk of peripheral artery disease, myocardial infarction, ischemic stroke, and vascular death. Recent studies demonstrated the inhibition of ADP-induced blood platelet activation by three major compounds of the flavonolignans group: silybin, silychristin, and silydianin. For this reason, the aim of the current work was to verify the effects of silybin, silychristin, and silydianin on ADP-induced physiological platelets responses, as well as mechanisms of P2Y12-dependent intracellular signal transduction. We evaluated the effect of tested flavonolignans on ADP-induced blood platelets' aggregation in platelet-rich plasma (PRP) (using light transmission aggregometry), adhesion to fibrinogen (using the static method), and the secretion of PF-4 (using the ELISA method). Additionally, using the double labeled flow cytometry method, we estimated platelet vasodilator-stimulated phosphoprotein (VASP) phosphorylation. We demonstrated a dose-dependent reduction of blood platelets' ability to perform ADP-induced aggregation, adhere to fibrinogen, and secrete PF-4 in samples treated with flavonolignans. Additionally, we observed that all of the tested flavonolignans were able to increase VASP phosphorylation in blood platelets samples, which is correlated with P2Y12 receptor inhibition. All of these analyses show that silychristin and silybin have the strongest inhibitory effect on blood platelet activation by ADP, while silydianin also inhibits the ADP pathway, but to a lesser extent. The results obtained in this study clearly demonstrate that silybin, silychristin, and silydianin have inhibitory properties against the P2Y12 receptor and block ADP-induced blood platelet

Beyond access: a case study on the intersection between accessibility, sustainability, and universal design.

PubMed

Gossett, Andrea; Mirza, Mansha; Barnds, Ann Kathleen; Feidt, Daisy

2009-11-01

A growing emphasis has been placed on providing equal opportunities for all people, particularly people with disabilities, to support participation. Barriers to participation are represented in part by physical space restrictions. This article explores the decision-making process during the construction of a new office building housing a disability-rights organization. The building project featured in this study was developed on the principles of universal design, maximal accessibility, and sustainability to support access and participation. A qualitative case study approach was used involving collection of data through in-depth interviews with key decision-makers; non-participant observations at design meetings; and on-site tours. Qualitative thematic analysis along with the development of a classification system was used to understand specific building elements and the relevant decision processes from which they resulted. Recording and analyzing the design process revealed several key issues including grassroots involvement of stakeholders; interaction between universal design and sustainable design; addressing diversity through flexibility and universality; and segregationist accessibility versus universal design. This case study revealed complex interactions between accessibility, universal design, and sustainability. Two visual models were proposed to understand and analyze these complexities.

An intact PDZ motif is essential for correct P2Y12 purinoceptor traffic in human platelets

PubMed Central

Nisar, Shaista; Daly, Martina E.; Federici, Augusto B.; Artoni, Andrea; Mumford, Andrew D.; Watson, Stephen P.

2011-01-01

The platelet P2Y12 purinoceptor (P2Y12R), which plays a crucial role in hemostasis, undergoes internalization and subsequent recycling to maintain receptor responsiveness, processes that are essential for normal platelet function. Here, we observe that P2Y12R function is compromised after deletion or mutation of the 4 amino acids at the extreme C-terminus of this receptor (ETPM), a putative postsynaptic density 95/disc large/zonula occludens-1 (PDZ)–binding motif. In cell line models, removal of this sequence or mutation of one of its core residues (P341A), attenuates receptor internalization and receptor recycling back to the membrane, thereby blocking receptor resensitization. The physiologic significance of these findings in the regulation of platelet function is shown by identification of a patient with a heterozygous mutation in the PDZ binding sequence of their P2Y12R (P341A) that is associated with reduced expression of the P2Y12R on the cell surface. Importantly, platelets from this subject showed significantly compromised P2Y12R recycling, emphasizing the importance of the extreme C-terminus of this receptor to ensure correct receptor traffic. PMID:21937696

RERTR-12 Insertion 2 Irradiation Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. M. Perez; G. S. Chang; D. M. Wachs

2012-09-01

The Reduced Enrichment for Research and Test Reactor (RERTR) experiment RERTR-12 was designed to provide comprehensive information on the performance of uranium-molybdenum (U-Mo) based monolithic fuels for research reactor applications.1 RERTR-12 insertion 2 includes the capsules irradiated during the last three irradiation cycles. These capsules include Z, Y1, Y2 and Y3 type capsules. The following report summarizes the life of the RERTR-12 insertion 2 experiment through end of irradiation, including as-run neutronic analysis results, thermal analysis results and hydraulic testing results.

A review on the sustainability of constructed wetlands for wastewater treatment: Design and operation.

PubMed

Wu, Haiming; Zhang, Jian; Ngo, Huu Hao; Guo, Wenshan; Hu, Zhen; Liang, Shuang; Fan, Jinlin; Liu, Hai

2015-01-01

Constructed wetlands (CWs) have been used as a green technology to treat various wastewaters for several decades. CWs offer a land-intensive, low-energy, and less-operational-requirements alternative to conventional treatment systems, especially for small communities and remote locations. However, the sustainable operation and successful application of these systems remains a challenge. Hence, this paper aims to provide and inspire sustainable solutions for the performance and application of CWs by giving a comprehensive review of CWs' application and the recent development on their sustainable design and operation for wastewater treatment. Firstly, a brief summary on the definition, classification and application of current CWs was presented. The design parameters and operational conditions of CWs including plant species, substrate types, water depth, hydraulic load, hydraulic retention time and feeding mode related to the sustainable operation for wastewater treatments were then discussed. Lastly, future research on improving the stability and sustainability of CWs were highlighted. Copyright © 2014 Elsevier Ltd. All rights reserved.

Luminescent properties of Cr-doped (GdX, Y1-X)3Al5O12 infra-red scintillator crystals

NASA Astrophysics Data System (ADS)

Suzuki, Akira; Kurosawa, Shunsuke; Yamaji, Akihiro; Shoji, Yasuhiro; Pejchal, Jan; Kamada, Kei; Yokota, Yuui; Yoshikawa, Akira

2014-10-01

Cr-doped (GdX Y1-X)3Al5O12 (X = 0, 0.25, 0.50) crystals prepared by the micro-pulling down method were investigated to develop a infra-red scintillator for implantable patient dosimeter in radiation therapy. In order to evaluate their optical and scintillation performance, the following properties were measured: (i) transmittance between ultra-violet and near-infra red region, (ii) photoluminescence spectra under Xe-lamp excitation, and (iii) X-ray excited radio-luminescence spectra. Cr:Y3Al5O12 and Cr:(Gd0.25 Y0.75)3Al5O12 crystals showed increased transmittance of 80%, while Cr:(Gd0.50 Y0.50)3Al5O12 had a lower transmittance of 40% due to its polycrystalline structure. In addition, all the Cr:(GdX Y1-X)3Al5O12 crystals showed sharp scintillation luminescence peaks ascribed to Cr3+ d-d transitions. Therefore, these results suggested that Cr:Y3Al5O12 and Cr:(Gd0.25 Y0.75)3Al5O12 crystals can be candidate materials for the dosimeter use.

NASA Prediction of Worldwide Energy Resource High Resolution Meteorology Data For Sustainable Building Design

NASA Technical Reports Server (NTRS)

Chandler, William S.; Hoell, James M.; Westberg, David; Zhang, Taiping; Stackhouse, Paul W., Jr.

2013-01-01

A primary objective of NASA's Prediction of Worldwide Energy Resource (POWER) project is to adapt and infuse NASA's solar and meteorological data into the energy, agricultural, and architectural industries. Improvements are continuously incorporated when higher resolution and longer-term data inputs become available. Climatological data previously provided via POWER web applications were three-hourly and 1x1 degree latitude/longitude. The NASA Modern Era Retrospective-analysis for Research and Applications (MERRA) data set provides higher resolution data products (hourly and 1/2x1/2 degree) covering the entire globe. Currently POWER solar and meteorological data are available for more than 30 years on hourly (meteorological only), daily, monthly and annual time scales. These data may be useful to several renewable energy sectors: solar and wind power generation, agricultural crop modeling, and sustainable buildings. A recent focus has been working with ASHRAE to assess complementing weather station data with MERRA data. ASHRAE building design parameters being investigated include heating/cooling degree days and climate zones.

Calendar Year 2011 Groundwater Monitoring Report, U.S. Department of Energy Y-12 National Security Complex, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elvado Environmental LLC,

2012-12-01

This report contains the groundwater and surface water monitoring data that were obtained during calendar year (CY) 2011 at the U.S. Department of Energy (DOE) Y-12 National Security Complex (Y-12) on the DOE Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee. The CY 2011 monitoring data were obtained from wells, springs, and surface water sampling locations in three hydrogeologic regimes at Y-12. The Bear Creek Hydrogeologic Regime (Bear Creek Regime) encompasses a section of Bear Creek Valley (BCV) between the west end of Y-12 and the west end of the Bear Creek Watershed (directions are in reference to the Y-12more » grid system). The Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime) encompasses the Y-12 industrial facilities and support structures in BCV. The Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime) encompasses a section of Chestnut Ridge directly south of Y-12. This report provides background information pertinent to groundwater and surface water quality monitoring in each hydrogeologic regime, including the topography and bedrock geology, surface water drainage, groundwater system, and known extent of groundwater contamination. The CY 2011 groundwater and surface water monitoring data in this report were obtained from sampling and analysis activities implemented under the Y-12 Groundwater Protection Program (GWPP) managed by Babcock & Wilcox Technical Services Y-12, LLC (B&W Y-12) and from sampling and analysis activities implemented under several monitoring programs managed by the DOE Environmental Management (EM) contractor responsible for environmental cleanup on the ORR. In August 2011, URS | CH2M Oak Ridge LLC (UCOR) replaced Bechtel Jacobs Company LLC (BJC) as the DOE EM contractor. For this report, BJC/UCOR will be referenced as the managing contractor for CY 2011. Cooperative implementation of the monitoring programs directed by the Y-12 GWPP and BJC/UCOR (i.e., coordinating sample collection and sharing data

Usefulness of the VerifyNow P2Y12 assay to evaluate the antiplatelet effects of ticagrelor and clopidogrel therapies.

PubMed

Jeong, Young-Hoon; Bliden, Kevin P; Antonino, Mark J; Park, Ki-Soo; Tantry, Udaya S; Gurbel, Paul A

2012-07-01

We analyzed the antiplatelet effects of different P2Y(12) receptor blockers with VerifyNow P2Y12 assay (VN-P2Y12) and light transmittance aggregometry (LTA). The point-of-care VN-P2Y12 has been used to assess the antiplatelet effects in clopidogrel-treated patients but has not been evaluated in detail in patients treated with ticagrelor. Patients were randomly assigned to either ticagrelor [180 mg loading/90 mg twice daily (n = 37)] or clopidogrel [600 mg loading/75 mg daily (n = 39)] on top of aspirin treatment, and platelet reactivity was measured serially during onset, maintenance, and offset phases. High on-treatment platelet reactivity (HPR) was defined as 5 and 20 μM adenosine diphosphate-induced maximal platelet aggregation ≥46% and ≥59%, respectively, and P2Y12 reaction units ≥235. Platelet function measured by VN-P2Y12 correlated well with LTA (.812 ≤ ρ ≤ .823, P < .001). VN-P2Y12 "BASE" values were consistent during administration of both agents. Calculated and reported percent inhibitions by VN-P2Y12 were similar (difference, -0.6%; 95% agreement limits, -22.9% to 21.6%). Platelet inhibition by VN-P2Y12 during clopidogrel and ticagrelor administrations was comparable to platelet inhibition by LTA. HPR determined by LTA and VN-P2Y12 were well matched, and the risk stratification between the two methods showed strong agreement after both therapies (κ > .7). The VerifyNow P2Y12 assay is effective in assessing the antiplatelet effects and in identifying HPR during clopidogrel or ticagrelor therapy. Copyright © 2012 Mosby, Inc. All rights reserved.

Design Criteria for Visual Cues Used in Disruptive Learning Interventions within Sustainability Education

ERIC Educational Resources Information Center

Tillmanns, Tanja; Holland, Charlotte; Filho, Alfredo Salomão

2017-01-01

This paper presents the design criteria for Visual Cues--visual stimuli that are used in combination with other pedagogical processes and tools in Disruptive Learning interventions in sustainability education--to disrupt learners' existing frames of mind and help re-orient learners' mind-sets towards sustainability. The theory of Disruptive…

Y{sub 2}MoSe{sub 3}O{sub 12} and Y{sub 2}MoTe{sub 3}O{sub 12}: Solid-state synthesis, structure determination, and characterization of two new quaternary mixed metal oxides containing asymmetric coordination environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bang, Seong-eun; Pan, Zhi; Kim, Yeong Hun

Two new quaternary yttrium molybdenum selenium/tellurium oxides, Y{sub 2}MoSe{sub 3}O{sub 12} and Y{sub 2}MoTe{sub 3}O{sub 12} have been prepared by standard solid-state reactions using Y{sub 2}O{sub 3}, MoO{sub 3}, and SeO{sub 2} (or TeO{sub 2}) as reagents. Single-crystal X-ray diffraction was used to determine the crystal structures of the reported materials. Although both of the materials contain second-order Jahn–Teller (SOJT) distortive cations and are stoichiometrically similar, they reveal different structural features: while Y{sub 2}MoSe{sub 3}O{sub 12} shows a three-dimensional framework consisting of YO{sub 8}, MoO{sub 6}, and SeO{sub 3} groups, Y{sub 2}MoTe{sub 3}O{sub 12} exhibits a layered structure composed ofmore » YO{sub 8}, MoO{sub 4}, TeO{sub 3}, and TeO{sub 4} polyhedra. With the Mo{sup 6+} cations in Y{sub 2}MoSe{sub 3}O{sub 12}, a C{sub 3}-type intraoctahedral distortion toward a face is observed, in which the direction of the out-of-center distortion for Mo{sup 6+} is away from the oxide ligand linked to a Se{sup 4+} cation. The Se{sup 4+} and Te{sup 4+} cations in both materials are in asymmetric coordination environment attributed to the lone pairs. Elemental analyses, infrared spectroscopy, thermal analyses, intraoctahedral distortions, and dipole moment calculations for the compounds are also presented. - Graphical abstract: Y{sub 2}MoSe{sub 3}O{sub 12} reveals a three-dimensional framework consisting of YO{sub 8}, MoO{sub 6}, and SeO{sub 3} polyhedra, whereas Y{sub 2}MoTe{sub 3}O{sub 12} exhibits a layered structure composed of YO{sub 8}, MoO{sub 4}, TeO{sub 3}, and TeO{sub 4} groups. - Highlights: • Two new selenite and tellurite (Y{sub 2}MoQ{sub 3}O{sub 12}; Q=Se and Te) are synthesized. • Y{sub 2}MoQ{sub 3}O{sub 12} contain second-order Jahn–Teller distortive cations in asymmetric environments. • The intra-octahedral distortion of the Mo{sup 6+} is influenced by the Se{sup 4+}.« less

Sustainability of radiologically contaminated territories.

PubMed

Mück, Konrad

2003-01-01

Decisions on appropriate countermeasures in the case of a contamination of large areas due to fallout from a weapon's detonations or a serious reactor or reprocessing plant accident depend on fallout level and the time period required for the exposure levels to fall below a given intervention limit. This is particularly relevant for countermeasures with high costs and substantial consequences to the population involved, such as relocation or soil perturbation. Natural processes which result in a decrease in activity concentrations in foodstuffs and external exposure with time, are least detrimental to the soil among all countermeasures proposed for rehabilitation of contaminated areas. The impact of these natural self-healing effects (soil sustainability) on the temporal activity reduction in foodstuffs, as well as their effect on the time period required for exposure levels to decrease to sufficiently low levels to allow unrestricted re-utilization and re-settlement of the land, are discussed. Depending on the type of foodstuff, in Central Europe this temporal decrease follows an effective half life of about 0.25-1.3 y from first to second year after fallout, followed by a decrease in milk with an effective half-life of 1-2 y in the next 7 y and about 5 y thereafter, while in cereals and vegetables in Austria a decrease by 2.3 y and in fruit by 1.3 y over a period of more than a decade is observed. In contrast, the decrease in foodstuffs derived from semi-natural environs is much slower by an effective half-life of roughly 8 y. The time-span for adequate recovery of a contaminated territory, therefore, depends on the fallout level and the radionuclides involved and the contribution of natural and semi-natural derived foodstuffs to the diet. It is shown that for 137Cs and a typical Central European diet the time span amounts to about 1 y for a deposition of 300 kBq m(-2) and to about 10 y for a deposition of 10,000 kBq m(-2). Thus it is demonstrated that natural

Design for sustainability of industrial symbiosis based on emergy and multi-objective particle swarm optimization.

PubMed

Ren, Jingzheng; Liang, Hanwei; Dong, Liang; Sun, Lu; Gao, Zhiqiu

2016-08-15

Industrial symbiosis provides novel and practical pathway to the design for the sustainability. Decision support tool for its verification is necessary for practitioners and policy makers, while to date, quantitative research is limited. The objective of this work is to present an innovative approach for supporting decision-making in the design for the sustainability with the implementation of industrial symbiosis in chemical complex. Through incorporating the emergy theory, the model is formulated as a multi-objective approach that can optimize both the economic benefit and sustainable performance of the integrated industrial system. A set of emergy based evaluation index are designed. Multi-objective Particle Swarm Algorithm is proposed to solve the model, and the decision-makers are allowed to choose the suitable solutions form the Pareto solutions. An illustrative case has been studied by the proposed method, a few of compromises between high profitability and high sustainability can be obtained for the decision-makers/stakeholders to make decision. Copyright © 2016 Elsevier B.V. All rights reserved.

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 3 2011-01-01 2011-01-01 false Sustainable principles for siting, design and construction. [Reserved] 433.6 Section 433.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR THE DESIGN AND CONSTRUCTION OF NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL...

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Sustainable principles for siting, design and construction. [Reserved] 433.6 Section 433.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR THE DESIGN AND CONSTRUCTION OF NEW FEDERAL COMMERCIAL AND MULTI-FAMILY HIGH-RISE RESIDENTIAL...

Vernacular design based on sustainable disaster’s mitigation communication and education strategy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mansoor, Alvanov Zpalanzani, E-mail: nova.zp@gmail.com, E-mail: alvanov@fsrd.itb.ac.id

Indonesia is located between three active tectonic plates, which are prone to natural disasters such as earthquake, volcanic eruption, and also giant tidal wave-tsunami. Adequate infrastructure plays an important role in disaster mitigation, yet without good public awareness, the mitigation process won’t be succeeded. The absence of awareness can lead to infrastructure mistreatment. Several reports on lack of understanding or misinterpretation of disaster mitigation especially from rural and coastal communities need to be solved, especially from communication aspects. This is an interdisciplinary study on disaster mitigation communication design and education strategy from visual communication design studies paradigm. This paper depictsmore » research results which applying vernacular design base to elaborate sustainable mitigation communication and education strategy on various visual media and social campaigns. This paper also describes several design approaches which may becomes way to elaborate sustainable awareness and understanding on disaster mitigation among rural and coastal communities in Indonesia.« less

Calendar Year 2009 Groundwater Monitoring Report, U.S. Department of Energy, Y-12 National Security Complex, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elvado Environmental LLC

2010-12-01

This report contains the groundwater and surface water monitoring data that were obtained during calendar year (CY) 2009 at the U.S. Department of Energy (DOE) Y-12 National Security Complex (hereafter referenced as Y-12) on the DOE Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee. The CY 2009 monitoring data were obtained from wells, springs, and surface water sampling locations in three hydrogeologic regimes at Y-12. The Bear Creek Hydrogeologic Regime (Bear Creek Regime) encompasses a section of Bear Creek Valley (BCV) between the west end of Y-12 and the west end of the Bear Creek Watershed (directions are in referencemore » to the Y-12 grid system). The Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime) encompasses the Y-12 industrial facilities and support structures in BCV. The Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime) encompasses a section of Chestnut Ridge directly south of Y-12. Section 2 of this report provides background information pertinent to groundwater and surface water quality monitoring in each hydrogeologic regime, including the topography and bedrock geology, surface water drainage, groundwater system, and extent of groundwater contamination. The CY 2009 groundwater and surface water monitoring data in this report were obtained from sampling and analysis activities implemented under the Y-12 Groundwater Protection Program (GWPP) managed by Babcock & Wilcox Technical Services Y-12, LLC (B&W Y-12) and from sampling and analysis activities implemented under several monitoring programs managed by Bechtel Jacobs Company LLC (BJC). Cooperative implementation of the monitoring programs directed by the Y-12 GWPP and BJC (i.e., coordinating sample collection and sharing data) ensures that the CY 2009 monitoring results fulfill requirements of all the applicable monitoring drivers with no duplication of sampling and analysis efforts. Section 3 of this report contains a summary of information regarding the

Progress and Future Plans for Mercury Remediation at the Y-12 National Security Complex, Oak Ridge, Tennessee - 13059

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkerson, Laura O.; DePaoli, Susan M.; Turner, Ralph

2013-07-01

The U.S. Department of Energy (DOE), along with the Tennessee Department of Environment and Conservation (TDEC) and the U.S. Environmental Protection Agency (EPA), has identified mercury contamination at the Y-12 National Security Complex (Y-12) as the highest priority cleanup risk on the Oak Ridge Reservation (ORR). The historic loss of mercury to the environment dwarfs any other contaminant release on the ORR. Efforts over the last 20 years to reduce mercury levels leaving the site in the surface waters of Upper East Fork Poplar Creek (UEFPC) have not resulted in a corresponding decrease in mercury concentrations in fish. Further reductionsmore » in mercury surface water concentrations are needed. Recent stimulus funding through the American Recovery and Reinvestment Act of 2009 (ARRA) has supported several major efforts involving mercury cleanup at Y-12. Near-term implementation activities are being pursued with remaining funds and include design of a centrally located mercury treatment facility for waterborne mercury, treatability studies on mercury-contaminated soils, and free mercury removal from storm drains. Out-year source removal will entail demolition/disposal of several massive uranium processing facilities along with removal and disposal of underlying contaminated soil. As a National Priorities List (NPL) site, cleanup is implemented under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and directed by the Federal Facility Agreement (FFA) between DOE, EPA, and TDEC. The CERCLA process is followed to plan, reach approval, implement, and monitor the cleanup. (authors)« less

A sustainable manufacturing system design: A fuzzy multi-objective optimization model.

PubMed

Nujoom, Reda; Mohammed, Ahmed; Wang, Qian

2017-08-10

In the past decade, there has been a growing concern about the environmental protection in public society as governments almost all over the world have initiated certain rules and regulations to promote energy saving and minimize the production of carbon dioxide (CO 2 ) emissions in many manufacturing industries. The development of sustainable manufacturing systems is considered as one of the effective solutions to minimize the environmental impact. Lean approach is also considered as a proper method for achieving sustainability as it can reduce manufacturing wastes and increase the system efficiency and productivity. However, the lean approach does not include environmental waste of such as energy consumption and CO 2 emissions when designing a lean manufacturing system. This paper addresses these issues by evaluating a sustainable manufacturing system design considering a measurement of energy consumption and CO 2 emissions using different sources of energy (oil as direct energy source to generate thermal energy and oil or solar as indirect energy source to generate electricity). To this aim, a multi-objective mathematical model is developed incorporating the economic and ecological constraints aimed for minimization of the total cost, energy consumption, and CO 2 emissions for a manufacturing system design. For the real world scenario, the uncertainty in a number of input parameters was handled through the development of a fuzzy multi-objective model. The study also addresses decision-making in the number of machines, the number of air-conditioning units, and the number of bulbs involved in each process of a manufacturing system in conjunction with a quantity of material flow for processed products. A real case study was used for examining the validation and applicability of the developed sustainable manufacturing system model using the fuzzy multi-objective approach.

Y-12 Groundwater Protection Program Groundwater and Surface Water Sampling and Analysis Plan for Calendar Year 2005

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2004-09-30

This plan provides a description of the groundwater and surface water quality monitoring activities planned for calendar year (CY) 2005 at the U.S. Department of Energy (DOE) Y-12 National Security Complex (Y-12) that will be managed by the Y-12 Groundwater Protection Program (GWPP). Groundwater and surface water monitoring performed by the GWPP during CY 2005 will be in accordance with DOE Order 540.1 requirements and the following goals: (1) to maintain surveillance of existing and potential groundwater contamination sources; (2) to provide for the early detection of groundwater contamination and determine the quality of groundwater and surface water where contaminantsmore » are most likely to migrate beyond the Oak Ridge Reservation property line; (3) to identify and characterize long-term trends in groundwater quality at Y-12; and (4) to provide data to support decisions concerning the management and protection of groundwater resources. Groundwater and surface water monitoring during CY 2005 will be performed primarily in three hydrogeologic regimes at Y-12: the Bear Creek Hydrogeologic Regime (Bear Creek Regime), the Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime), and the Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime). The Bear Creek and East Fork regimes are located in Bear Creek Valley, and the Chestnut Ridge Regime is located south of Y-12 (Figure A.1). Additional surface water monitoring will be performed north of Pine Ridge, along the boundary of the Oak Ridge Reservation (Figure A.1). Modifications to the CY 2005 monitoring program may be necessary during implementation. Changes in programmatic requirements may alter the analytes specified for selected monitoring wells or may add or remove wells from the planned monitoring network. All modifications to the monitoring program will be approved by the Y-12 GWPP manager and documented as addenda to this sampling and analysis plan.« less

Developing a Decision Model of Sustainable Product Design and Development from Product Servicizing in Taiwan

ERIC Educational Resources Information Center

Huang, Yu-Chen; Tu, Jui-Che; Hung, So-Jeng

2016-01-01

In response to the global trend of low carbon and the concept of sustainable development, enterprises need to develop R&D for the manufacturing of energy-saving and sustainable products and low carbon products. Therefore, the purpose of this study was to construct a decision model for sustainable product design and development from product…

Solar sustained plasma/absorber conceptual design

NASA Technical Reports Server (NTRS)

Rodgers, R. J.; Krascella, N. L.; Kendall, J. S.

1979-01-01

A space power system concept was evaluated which uses concentrated solar energy to heat a working fluid to temperatures as high as 4000 K. The high temperature working fluid could be used for efficient electric power production in advanced thermal or magnetohydrodynamic conversion cycles. Energy absorber configurations utilizing particles or cesium vapor absorber material were investigaed. Results of detailed radiant heat transfer calculations indicated approximately 86 percent of the incident solar energy could be absorbed within a 12-cm-dia flowing stream of gas borne carbon particles. Calculated total energy absorption in the cesium vapor seeded absorber configuration ranged from 34 percent to 64 percent of the incident solar energy. Solar flux concentration ratios of between approximately 3000 and 10,000 will be required to sustain absorber temperatures in the range from 3000 K to 4000 K.

Storm water runoff for the Y-12 Plant and selected parking lots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, E.T.

1996-01-01

A comparison of storm water runoff from the Y-12 Plant and selected employee vehicle parking lots to various industry data is provided in this document. This work is an outgrowth of and part of the continuing Non-Point Source Pollution Elimination Project that was initiated in the late 1980s. This project seeks to identify area pollution sources and remediate these areas through the Resource Conservation and Recovery Act/Comprehensive Environmental Response, Compensation, and Liability Act (RCRA/CERCLA) process as managed by the Environmental Restoration Organization staff. This work is also driven by the Clean Water Act Section 402(p) which, in part, deals withmore » establishing a National Pollutant Discharge Elimination System (NPDES) permit for storm water discharges. Storm water data from events occurring in 1988 through 1991 were analyzed in two reports: Feasibility Study for the Best Management Practices to Control Area Source Pollution Derived from Parking Lots at the DOE Y-12 Plant, September 1992, and Feasibility Study of Best Management Practices for Non-Point Source Pollution Control at the Oak Ridge Y-12 Plant, February 1993. These data consisted of analysis of outfalls discharging to upper East Fork Poplar Creek (EFPC) within the confines of the Y-12 Plant (see Appendixes D and E). These reports identified the major characteristics of concern as copper, iron, lead, manganese, mercury, nitrate (as nitrogen), zinc, biological oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS), fecal coliform, and aluminum. Specific sources of these contaminants were not identifiable because flows upstream of outfalls were not sampled. In general, many of these contaminants were a concern in many outfalls. Therefore, separate sampling exercises were executed to assist in identifying (or eliminating) specific suspected sources as areas of concern.« less

Creating the Urban Village: Teaching Pre-Service Teachers about Sustainable Design in Architecture and Community Planning

ERIC Educational Resources Information Center

Vande Zande, Robin

2010-01-01

Sustainable design is a philosophy adopted by people concerned with the health of society and the natural environment. The practice of sustainable design works toward the improvement of the quality of the built environment, while reducing or eradicating the negative impact on the natural environment (McLennan 2004). It is a philosophical approach…

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2011 CFR

2011-01-01

... FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal Low-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Code of Federal Regulations, 2010 CFR

2010-01-01

... FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal Low-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

Using Sustainability Metrics and Indicators to Design Sustainable Supply Chains

EPA Science Inventory

Sustainability is widely associated with the statement from the World Commission on Environment and Development, 1987: “… development that meets the needs of the present without compromising the ability of future generations to meet their own needs…” Hence, sustainability is abo...

Mixed Transportation Network Design under a Sustainable Development Perspective

PubMed Central

Qin, Jin; Ni, Ling-lin; Shi, Feng

2013-01-01

A mixed transportation network design problem considering sustainable development was studied in this paper. Based on the discretization of continuous link-grade decision variables, a bilevel programming model was proposed to describe the problem, in which sustainability factors, including vehicle exhaust emissions, land-use scale, link load, and financial budget, are considered. The objective of the model is to minimize the total amount of resources exploited under the premise of meeting all the construction goals. A heuristic algorithm, which combined the simulated annealing and path-based gradient projection algorithm, was developed to solve the model. The numerical example shows that the transportation network optimized with the method above not only significantly alleviates the congestion on the link, but also reduces vehicle exhaust emissions within the network by up to 41.56%. PMID:23476142

Mixed transportation network design under a sustainable development perspective.

PubMed

Qin, Jin; Ni, Ling-lin; Shi, Feng

2013-01-01

A mixed transportation network design problem considering sustainable development was studied in this paper. Based on the discretization of continuous link-grade decision variables, a bilevel programming model was proposed to describe the problem, in which sustainability factors, including vehicle exhaust emissions, land-use scale, link load, and financial budget, are considered. The objective of the model is to minimize the total amount of resources exploited under the premise of meeting all the construction goals. A heuristic algorithm, which combined the simulated annealing and path-based gradient projection algorithm, was developed to solve the model. The numerical example shows that the transportation network optimized with the method above not only significantly alleviates the congestion on the link, but also reduces vehicle exhaust emissions within the network by up to 41.56%.

Immune activation underlies a sustained clinical response to Yttrium-90 radioembolisation in hepatocellular carcinoma.

PubMed

Chew, Valerie; Lee, Yun Hua; Pan, Lu; Nasir, Nurul J M; Lim, Chun Jye; Chua, Camillus; Lai, Liyun; Hazirah, Sharifah Nur; Lim, Tony Kiat Hon; Goh, Brian K P; Chung, Alexander; Lo, Richard H G; Ng, David; Filarca, Rene L F; Albani, Salvatore; Chow, Pierce K H

2018-02-13

Yttrium-90 (Y90)-radioembolisation (RE) significantly regresses locally advanced hepatocellular carcinoma and delays disease progression. The current study is designed to deeply interrogate the immunological impact of Y90-RE, which elicits a sustained therapeutic response. Time-of-flight mass cytometry and next-generation sequencing (NGS) were used to analyse the immune landscapes of tumour-infiltrating leucocytes (TILs), tumour tissues and peripheral blood mononuclear cells (PBMCs) at different time points before and after Y90-RE. TILs isolated after Y90-RE exhibited signs of local immune activation: higher expression of granzyme B (GB) and infiltration of CD8 + T cells, CD56 + NK cells and CD8 + CD56 + NKT cells. NGS confirmed the upregulation of genes involved in innate and adaptive immune activation in Y90-RE-treated tumours. Chemotactic pathways involving CCL5 and CXCL16 correlated with the recruitment of activated GB + CD8 + T cells to the Y90-RE-treated tumours. When comparing PBMCs before and after Y90-RE, we observed an increase in tumour necrosis factor-α on both the CD8 + and CD4 + T cells as well as an increase in percentage of antigen-presenting cells after Y90-RE, implying a systemic immune activation. Interestingly, a high percentage of PD-1 + /Tim-3 + CD8 + T cells coexpressing the homing receptors CCR5 and CXCR6 denoted Y90-RE responders. A prediction model was also built to identify sustained responders to Y90-RE based on the immune profiles from pretreatment PBMCs. High-dimensional analysis of tumour and systemic immune landscapes identified local and systemic immune activation that corresponded to the sustained response to Y90-RE. Potential biomarkers associated with a positive clinical response were identified and a prediction model was built to identify sustained responders prior to treatment. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is

Toxicity of lanthanum oxide nanoparticles to the fungus Moniliella wahieum Y12T isolated from biodiesel.

PubMed

Zhang, Lin; Zhou, Lingyan; Li, Qing X; Liang, Hong; Qin, Huaming; Masutani, Stephen; Yoza, Brandon

2018-05-01

Moniliella wahieum Y12 T , isolated from biodiesel was used as a model organism to assess the use of lanthanum oxide (La 2 O 3 ) (60-80 nm) and silver oxide (AgO) (10-40 nm) nanoparticles as potential fungal inhibitors. This is the first study to investigate the use of nanoscale La 2 O 3 as a eukaryotic bio-inhibitor. The AgO nanoparticles were relatively effective at inhibiting the growth of M. wahieum Y12 T . The half maximal effective concentration (EC 50 ) for AgO was 0.012 mg/mL as compared with 4.63 mg/mL of La 2 O 3 . Fluorescein diacetate analysis showed that AgO nanoparticles significantly reduced metabolic activity in M. wahieum Y12 T . The results of this study indicated that AgO nanoparticles can be a nonspecific inhibitor for the treatment of M. wahieum Y12 T , a eukaryotic biodiesel contaminant. Copyright © 2018 Elsevier Ltd. All rights reserved.

Educating the Imagination: Teaching for Sustainability through a Bioregional Literacy Curriculum

ERIC Educational Resources Information Center

Howard, Patrick

2012-01-01

In Canada, a national framework proposes to integrate learning outcomes into existing K-12 curricula to teach the values, skills and behaviours of sustainability. This article describes a research project designed to identify existing curricula that may contribute to education for sustainable development (ESD). The province of Newfoundland and…

Extension Sustainability Camp: Design, Implementation, and Evaluation

ERIC Educational Resources Information Center

Brain, Roslynn; Upton, Sally; Tingey, Brett

2015-01-01

Sustainability Camps provide an opportunity for Extension educators to be in the forefront of sustainability outreach and to meet the growing demand for sustainability education. This article shares development, implementation, and evaluation of an Extension Sustainability Camp for youth, grades 4-6. Camp impact was measured via daily pre-and…

Teens, Power Tools, and Green Schools: Education for Sustainability through a University Environmental Design Program and Middle School Partnership

ERIC Educational Resources Information Center

Derr, Victoria

2017-01-01

This article explores the role of green schools in promoting education for sustainability by reflecting on a university-middle school partnership focused on sustainable design. Undergraduates and middle school students met weekly for a semester to learn about sustainability through simple design projects and activities that focused on…

Investigating the binding mechanism of novel 6-aminonicotinate-based antagonists with P2Y12 by 3D-QSAR, docking and molecular dynamics simulations.

PubMed

Zhou, Shengfu; Fang, Danqing; Tan, Shepei; Lin, Weicong; Wu, Wenjuan; Zheng, Kangcheng

2017-10-01

P2Y 12 receptor is an attractive target for the anti-platelet therapies, treating various thrombotic diseases. In this work, a total of 107 6-aminonicotinate-based compounds as potent P2Y 12 antagonists were studies by a molecular modeling study combining three-dimensional quantitative structure-activity relationship (3D-QSAR), molecular docking and molecular dynamics (MD) simulations to explore the decisive binding conformations of these antagonists with P2Y 12 and the structural features for the activity. The optimum CoMFA and CoMSIA models identified satisfactory robustness and good predictive ability, with R 2  = .983, q 2  = .805, [Formula: see text] = .881 for CoMFA model, and R 2  = .935, q 2  = .762, [Formula: see text] = .690 for CoMSIA model, respectively. The probable binding modes of compounds and key amino acid residues were revealed by molecular docking. MD simulations and MM/GBSA free energy calculations were further performed to validate the rationality of docking results and to compare the binding modes of several compound pairs with different activities, and the key residues (Val102, Tyr105, Tyr109, His187, Val190, Asn191, Phe252, His253, Arg256, Tyr259, Thr260, Val279, and Lys280) for the higher activity were pointed out. The binding energy decomposition indicated that the hydrophobic and hydrogen bond interactions play important roles for the binding of compounds to P2Y 12 . We hope these results could be helpful in design of potent and selective P2Y 12 antagonists.

Architectural design led approach to sustainable tourism for the waterfront development of Kunduchi in Tanzania

NASA Astrophysics Data System (ADS)

Leus, M.; Winkels, P.; Hannes, E.

2018-04-01

In Kunduchi, located in the Kinondoni district of the Dar es Salaam Region, it is of vital importance for the lives and livelihoods of the indigenous people to preserve the typical ecosystems and ensure the identity and economic resilience of these areas. The problem statement is as follows: In what way can sustainable tourism in Kunduchi serve as an engine for economic and social empowerment? How can Kunduchi be an inspiring example for the development of the coast of Dar Es Salaam in Tanzania that is threatened by large-scale tourist infrastructure? How to design sustainable solutions with respect for the local community and the local traditions? Firstly, a theoretical framework that connects sustainable tourism with the sustainable development of coastal areas is defined. Assumptions made on the basis of the literature review provide parameters that play an important role in the architectural concepts. Secondly, a research by design is presented in order to analyze and evaluate different scenarios to outline the opportunities of sustainable tourism on site of Kunduchi. Sustainable waterfront development is an obvious subtitle since the subtle spatial integration of these projects in the urban and water related context of Dares Salaam is of major importance.

Designing Energy Supply Chains with the P-graph Framework under Cost Constraints and Sustainability Considerations

EPA Science Inventory

A computer-aided methodology for designing sustainable supply chains is presented using the P-graph framework to develop supply chain structures which are analyzed using cost, the cost of producing electricity, and two sustainability metrics: ecological footprint and emergy. They...

Designing Energy Supply Chains with the P-Graph Framework under Cost Constraints andSustainability Considerations

EPA Science Inventory

A computer-aided methodology for designing sustainable supply chains is presented using the P-graph framework to develop supply chain structures which are analyzed using cost, the cost of producing electricity, and two sustainability metrics: ecological footprint and emergy. They...

Sustainable water cycle design for urban areas.

PubMed

Maher, M; Lustig, T

2003-01-01

This paper presents the argument that the environmental, social and economic benefits of decentralised systems are such that they should present a serious alternative to centralised systems in existing and future planned urban developments. It will be shown that the combination of technical, social and regulatory factors that influenced the popularity of centralised systems has altered, and that decentralised systems should now be considered as well. The environmental, social and economic advantages and disadvantages of several sustainable watercycle case studies are examined and compared with centralised systems. The studies examined will go from large scale down to designs suitable for typical residential houses on standard urban blocks.

Sustainable Lifestyle Change-Participatory Design of Support Together with Persons with Obesity in the Third Age.

PubMed

Wiklund Axelsson, Sarianne; Wikberg-Nilsson, Åsa; Melander Wikman, Anita

2016-12-16

Sustainable lifestyle changes due to obesity are difficult to achieve regardless methods used. We need to know more about the lived experience of obesity and older persons' needs for support to make a sustainable change. This paper focuses on the need-finding process in designing support for a sustainable lifestyle change. Multistage focus group interviews were conducted with persons aged 61-72 living in Northern Sweden. A participatory and appreciative reflection and action (PAAR) approach was used in the group-sessions. Probes were used to increase reflections and achieve a deeper knowledge about the participants' needs of support. Data were analysed using qualitative thematic content analysis. Our findings revealed that to be able to succeed with a lifestyle change a focus has to be on a converted way of thinking, managing vulnerability, and achieving an emotional balance. To achieve a sustainable lifestyle change due to obesity in the third age the focus has to be on a health identity instead of a weight identity. Personalised support with enjoyable physical activities should be designed and developed. Strategies for emotional balance based on autonomy and self-empowerment must be included. This knowledge is important when designing support for sustainable change.

Exploring the design of a lightweight, sustainable and comfortable aircraft seat.

PubMed

Kokorikou, A; Vink, P; de Pauw, I C; Braca, A

2016-07-19

Making a lightweight seat that is also comfortable can be contradictory because usually comfort improvement means adding a feature (e.g. headrest, adjustable lumbar support, movable armrests, integrated massage systems, etc.), which makes seats heavier. This paper explores the design of an economy class aircraft seat that aims to be lightweight, comfortable and sustainable. Theory about comfort in seats, ergonomics, lightweight design, Biomimicry and Cradle to cradle was studied and resulted in a list of requirements that the new seat should satisfy. The design process resulted in a new seat that is 36% lighter than the reference seat, which showed that a significant weight reduction can be achieved. This was completed by re-designing the backrest and seat pan and integrating their functions into a reduced number of parts. Apart from the weight reduction that helps in reducing the airplane's environmental impact, the seat also satisfies most of the other sustainability requirements such as the use of recyclable materials, design for disassembly, easy to repair. A user test compared the new seat with a premium economy class aircraft seat and the level of comfort was similar. Strong points of the new design were identified such as the lumbar support and the cushioning material, as well as shortcomings on which the seat needs to be improved, like the seat pan length and the first impression. Long term comfort tests are still needed as the seat is meant for long-haul flights.

Sustainable Skyscrapers: Designing the Net Zero Energy Building of the Future

NASA Astrophysics Data System (ADS)

Kothari, S.; Bartsch, A.

2016-12-01

Cities of the future will need to increase population density in order to keep up with the rising populations in the limited available land area. In order to provide sufficient power as the population grows, cities must become more energy efficient. Fossil fuels and grid energy will continue to become more expensive as nonrenewable resources deplete. The obvious solution to increase population density while decreasing the reliance on fossil fuels is to build taller skyscrapers that are energy neutral, i.e. self-sustaining. However, current skyscrapers are not energy efficient, and therefore cannot provide a sustainable solution to the problem of increasing population density in the face of depleting energy resources. The design of a net zero energy building that includes both residential and commercial space is presented. Alternative energy systems such as wind turbines, photovoltaic cells, and a waste-to-fuel conversion plant have been incorporated into the design of a 50 story skyscraper that is not reliant on fossil fuels and has a payback time of about six years. Although the current building was designed to be located in San Francisco, simple modifications to the design would allow this building to fit the needs of any city around the world.

Soil Management Plan for the Oak Ridge Y-12 National Security Complex Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2005-03-02

This Soil Management Plan applies to all activities conducted under the auspices of the National Nuclear Security Administration (NNSA) Oak Ridge Y-12 National Security Complex (Y-12) that involve soil disturbance and potential management of waste soil. The plan was prepared under the direction of the Y-12 Environmental Compliance Department of the Environment, Safety, and Health Division. Soil disturbances related to maintenance activities, utility and building construction projects, or demolition projects fall within the purview of the plan. This Soil Management Plan represents an integrated, visually oriented, planning and information resource tool for decision making involving excavation or disturbance of soilmore » at Y-12. This Soil Management Plan addresses three primary elements. (1) Regulatory and programmatic requirements for management of soil based on the location of a soil disturbance project and/or the regulatory classification of any contaminants that may be present (Chap. 2). Five general regulatory or programmatic classifications of soil are recognized to be potentially present at Y-12; soil may fall under one or more these classifications: (a) Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) pursuant to the Oak Ridge Reservation (ORR) Federal Facilities Agreement; (b) Resource Conservation and Recovery Act (RCRA); (c) RCRA 3004(u) solid waste managements units pursuant to the RCRA Hazardous and Solid Waste Amendments Act of 1984 permit for the ORR; (d) Toxic Substances and Control Act-regulated soil containing polychlorinated biphenyls; and (e) Radiologically contaminated soil regulated under the Atomic Energy Act review process. (2) Information for project planners on current and future planned remedial actions (RAs), as prescribed by CERCLA decision documents (including the scope of the actions and remedial goals), land use controls implemented to support or maintain RAs, RCRA post-closure regulatory requirements

In vitro degradation of MAO/PLA coating on Mg-1.21Li-1.12Ca-1.0Y alloy

NASA Astrophysics Data System (ADS)

Zeng, Rong-Chang; Qi, Wei-Chen; Song, Ying-Wei; He, Qin-Kun; Cui, Hong-Zhi; Han, En-Hou

2014-12-01

Magnesium and its alloys are promising biomaterials due to their biocompatibility and osteoinduction. The plasticity and corrosion resistance of commercial magnesium alloys cannot meet the requirements for degradable biomaterials completely at present. Particularly, the alkalinity in the microenvironment surrounding the implants, resulting from the degradation, arouses a major concern. Micro-arc oxidation (MAO) and poly(lactic acid) (PLA) composite (MAO/PLA) coating on biomedical Mg-1.21Li-1.12Ca-1.0Y alloy was prepared to manipulate the pH variation in an appropriate range. Surface morphologies were discerned using SEM and EMPA. And corrosion resistance was evaluated via electrochemical polarization and impedance and hydrogen volumetric method. The results demonstrated that the MAO coating predominantly consisted of MgO, Mg2SiO4 and Y2O3. The composite coating markedly improved the corrosion resistance of the alloy. The rise in solution pH for the MAO/PLA coating was tailored to a favorable range of 7.5-7.8. The neutralization caused by the alkalinity of MAO and Mg substrate and acidification of PLA was probed. The result designates that MAO/PLA composite coating on Mg-1.21Li-1.12Ca-1.0Y alloys may be a promising biomedical coating.

Assessment of modularity architecture for recovery process of electric vehicle in supporting sustainable design

NASA Astrophysics Data System (ADS)

Baroroh, D. K.; Alfiah, D.

2018-05-01

The electric vehicle is one of the innovations to reduce the pollution of the vehicle. Nevertheless, it still has a problem, especially for disposal stage. In supporting product design and development strategy, which is the idea of sustainable design or problem solving of disposal stage, assessment of modularity architecture from electric vehicle in recovery process needs to be done. This research used Design Structure Matrix (DSM) approach to deciding interaction of components and assessment of modularity architecture using the calculation of value from 3 variables, namely Module Independence (MI), Module Similarity (MS), and Modularity for End of Life Stage (MEOL). The result of this research shows that existing design of electric vehicles has the architectural design which has a high value of modularity for recovery process on disposal stage. Accordingly, so it can be reused and recycled in component level or module without disassembly process to support the product that is environmentally friendly (sustainable design) and able reduce disassembly cost.

Teaching Art a Greener Path: Integrating Sustainability Concepts of Interior Design Curriculum into the Art Education Curriculum

ERIC Educational Resources Information Center

Hasio, Cindy; Crane, Tommy J.

2014-01-01

Interior design is seldom integrated within the general art education curriculum because the subject matter is generally segregated as a commercial art. However, the importance of interior design concepts of sustainability in art education can really help a student understand the scale and proportion of space and mass, and how sustainability is…

P2Y2 Receptor and EGFR Cooperate to Promote Prostate Cancer Cell Invasion via ERK1/2 Pathway.

PubMed

Li, Wei-Hua; Qiu, Ying; Zhang, Hong-Quan; Tian, Xin-Xia; Fang, Wei-Gang

2015-01-01

As one member of G protein-coupled P2Y receptors, P2Y2 receptor can be equally activated by extracellular ATP and UTP. Our previous studies have proved that activation of P2Y2 receptor by extracellular ATP could promote prostate cancer cell invasion and metastasis in vitro and in vivo via regulating the expressions of some epithelial-mesenchymal transition/invasion-related genes (including IL-8, E-cadherin, Snail and Claudin-1), and the most significant change in expression of IL-8 was observed after P2Y2 receptor activation. However, the signaling pathway downstream of P2Y2 receptor and the role of IL-8 in P2Y2-mediated prostate cancer cell invasion remain unclear. Here, we found that extracellular ATP/UTP induced activation of EGFR and ERK1/2. After knockdown of P2Y2 receptor, the ATP -stimulated phosphorylation of EGFR and ERK1/2 was significantly suppressed. Further experiments showed that inactivation of EGFR and ERK1/2 attenuated ATP-induced invasion and migration, and suppressed ATP-mediated IL-8 production. In addition, knockdown of IL-8 inhibited ATP-mediated invasion and migration of prostate cancer cells. These findings suggest that P2Y2 receptor and EGFR cooperate to upregulate IL-8 production via ERK1/2 pathway, thereby promoting prostate cancer cell invasion and migration. Thus blocking of the P2Y2-EGFR-ERK1/2 pathway may provide effective therapeutic interventions for prostate cancer.

Sustainability Design in Higher Education: Curriculum, Teaching Methods, and Program Integration

ERIC Educational Resources Information Center

Sydow, Brooke C.

2012-01-01

Due to the growing problems of an unsustainable world, this qualitative, phenomenological study was designed to investigate the process of developing and integrating sustainability curriculum into general education requirements in higher education. The researcher interviewed six participants from different parts of the world who had first-hand…

Y-12 Groundwater Protection Program Groundwater and Surface Water Sampling and Analysis Plan for Calendar Year 2004

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elvado Environmental LLC for the Environmental Compliance Department ES&H Division, Y-12 National Security Complex Oak Ridge, Tennessee

2003-09-30

This plan provides a description of the groundwater and surface water quality monitoring activities planned for calendar year (CY) 2004 at the U.S. Department of Energy (DOE) Y-12 National Security Complex that will be managed by the Y-12 Groundwater Protection Program (GWPP). Groundwater and surface water monitoring performed by the GWPP during CY 2004 will be in accordance with the following requirements of DOE Order 5400.1: (1) to maintain surveillance of existing and potential groundwater contamination sources; (2) to provide for the early detection of groundwater contamination and determine the quality of groundwater and surface water where contaminants are mostmore » likely to migrate beyond the Oak Ridge Reservation property line; (3) to identify and characterize long-term trends in groundwater quality at Y-12; and (4) to provide data to support decisions concerning the management and protection of groundwater resources. Groundwater and surface water monitoring during CY 2004 will be performed primarily in three hydrogeologic regimes at Y-12: the Bear Creek Hydrogeologic Regime (Bear Creek Regime), the Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime), and the Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime). The Bear Creek and East Fork regimes are located in Bear Creek Valley, and the Chestnut Ridge Regime is located south of Y-12 (Figure A.1). Additional surface water monitoring will be performed north of Pine Ridge, along the boundary of the Oak Ridge Reservation (Figure A.1). Modifications to the CY 2004 monitoring program may be necessary during implementation. Changes in programmatic requirements may alter the analytes specified for selected monitoring wells, or wells could be added or removed from the planned monitoring network. All modifications to the monitoring program will be approved by the Y-12 GWPP manager and documented as addenda to this sampling and analysis plan.« less

Association between the Number of Injuries Sustained and 12-Month Disability Outcomes: Evidence from the Injury-VIBES Study

PubMed Central

Gabbe, Belinda J.; Simpson, Pam M.; Lyons, Ronan A.; Ameratunga, Shanthi; Harrison, James E.; Derrett, Sarah; Polinder, Suzanne; Davie, Gabrielle; Rivara, Frederick P.

2014-01-01

Objective To determine associations between the number of injuries sustained and three measures of disability 12-months post-injury for hospitalised patients. Methods Data from 27,840 adult (18+ years) participants, hospitalised for injury, were extracted for analysis from the Validating and Improving injury Burden Estimates (Injury-VIBES) Study. Modified Poisson and linear regression analyses were used to estimate relative risks and mean differences, respectively, for a range of outcomes (Glasgow Outcome Scale-Extended, GOS-E; EQ-5D and 12-item Short Form health survey physical and mental component summary scores, PCS-12 and MCS-12) according to the number of injuries sustained, adjusted for age, sex and contributing study. Findings More than half (54%) of patients had an injury to more than one ICD-10 body region and 62% had sustained more than one Global Burden of Disease injury type. The adjusted relative risk of a poor functional recovery (GOS-E<7) and of reporting problems on each of the items of the EQ-5D increased by 5–10% for each additional injury type, or body region, injured. Adjusted mean PCS-12 and MCS-12 scores worsened with each additional injury type, or body region, injured by 1.3–1.5 points and 0.5 points, respectively. Conclusions Consistent and strong relationships exist between the number of injury types and body regions injured and 12-month functional and health status outcomes. Existing composite measures of anatomical injury severity such as the NISS or ISS, which use up to three diagnoses only, may be insufficient for characterising or accounting for multiple injuries in disability studies. Future studies should consider the impact of multiple injuries to avoid under-estimation of injury burden. PMID:25501651

P2Y12 shRNA treatment decreases SGC activation to relieve diabetic neuropathic pain in type 2 diabetes mellitus rats.

PubMed

Wang, Shouyu; Wang, Zilin; Li, Lin; Zou, Lifang; Gong, Yingxin; Jia, Tianyu; Zhao, Shanhong; Yuan, Huilong; Shi, Liran; Liu, Shuangmei; Wu, Bing; Yi, Zhihua; Liu, Hui; Gao, Yun; Li, Guilin; Deussing, Jan M; Li, Man; Zhang, Chunping; Liang, Shangdong

2018-06-26

Diabetic neuropathic pain is a common complication of type 2 diabetes mellitus (DM). Activation of satellite glial cells (SGCs) in the dorsal root ganglia (DRG) plays a crucial role in neuropathic pain through the release of proinflammatory cytokines. The P2Y12 receptor is expressed in SGCs of the DRG. In this study, our aim was to investigate the role of the P2Y12 receptor on the pathological changes in diabetic neuropathic pain. The present study showed that diabetic neuropathic pain increased mechanical and thermal hyperalgesia in type 2 DM model rats. The results showed that the expression levels of P2Y12 messenger RNA (mRNA) and protein in DRG SGCs were increased in DM model rats compared with control rats. Glial fibrillary acidic protein (GFAP) and interleukin-1β (IL-1β) expression levels in the DRG were increased in DM rats. Upregulation of GFAP is a marker of SGC activation. Targeting the P2Y12 receptor by short hairpin RNA (shRNA) decreased the upregulated expression of P2Y12 mRNA and protein, coexpression of P2Y12 and GFAP, the expression of GFAP, IL-1β, and tumor necrosis factor-receptor 1 in the DRG of DM rats, and relieved mechanical and thermal hyperalgesia in DM rats. After treatment with the P2Y12 receptor shRNA, the enhancing integrated OPTICAL density (IOD) ratios of p-P38 MAPK to P38 mitogen activated protein kinase (MAPK) in the DM rats treated with P2Y12 shRNA were significantly lower than that in the untreated DM rats. Therefore, P2Y12 shRNA treatment decreased SGC activation to relieve mechanical and thermal hyperalgesia in DM rats. © 2018 Wiley Periodicals, Inc.

The generation of a 1-hydroxy-2-naphthoate 1,2-dioxygenase by single point mutations of salicylate 1,2-dioxygenase--rational design of mutants and the crystal structures of the A85H and W104Y variants.

PubMed

Ferraroni, Marta; Steimer, Lenz; Matera, Irene; Bürger, Sibylle; Scozzafava, Andrea; Stolz, Andreas; Briganti, Fabrizio

2012-12-01

Key amino acid residues of the salicylate 1,2-dioxygenase (SDO), an iron (II) class III ring cleaving dioxygenase from Pseudaminobacter salicylatoxidans BN12, were selected, based on amino acid sequence alignments and structural analysis of the enzyme, and modified by site-directed mutagenesis to obtain variant forms with altered catalytic properties. SDO shares with 1-hydroxy-2-naphthoate dioxygenase (1H2NDO) its unique ability to oxidatively cleave monohydroxylated aromatic compounds. Nevertheless SDO is more versatile with respect to 1H2NDO and other known gentisate dioxygenases (GDOs) because it cleaves not only gentisate and 1-hydroxy-2-naphthoate (1H2NC) but also salicylate and substituted salicylates. Several enzyme variants of SDO were rationally designed to simulate 1H2NDO. The basic kinetic parameters for the SDO mutants L38Q, M46V, A85H and W104Y were determined. The enzyme variants L38Q, M46V, A85H demonstrated higher catalytic efficiencies toward 1-hydroxy-2-naphthoate (1H2NC) compared to gentisate. Remarkably, the enzyme variant A85H effectively cleaved 1H2NC but did not oxidize gentisate at all. The W104Y SDO mutant exhibited reduced reaction rates for all substrates tested. The crystal structures of the A85H and W104Y variants were solved and analyzed. The substitution of Ala85 with a histidine residue caused significant changes in the orientation of the loop containing this residue which is involved in the active site closing upon substrate binding. In SDO A85H this specific loop shifts away from the active site and thus opens the cavity favoring the binding of bulkier substrates. Since this loop also interacts with the N-terminal residues of the vicinal subunit, the structure and packing of the holoenzyme might be also affected. Copyright © 2012 Elsevier Inc. All rights reserved.

Inverse agonism at the P2Y12 receptor and ENT1 transporter blockade contribute to platelet inhibition by ticagrelor.

PubMed

Aungraheeta, Riyaad; Conibear, Alexandra; Butler, Mark; Kelly, Eamonn; Nylander, Sven; Mumford, Andrew; Mundell, Stuart J

2016-12-08

Ticagrelor is a potent antagonist of the P2Y 12 receptor (P2Y 12 R) and consequently an inhibitor of platelet activity effective in the treatment of atherothrombosis. Here, we sought to further characterize its molecular mechanism of action. Initial studies showed that ticagrelor promoted a greater inhibition of adenosine 5'-diphosphate (ADP)-induced Ca 2+ release in washed platelets vs other P2Y 12 R antagonists. This additional effect of ticagrelor beyond P2Y 12 R antagonism was in part as a consequence of ticagrelor inhibiting the equilibrative nucleoside transporter 1 (ENT1) on platelets, leading to accumulation of extracellular adenosine and activation of G s -coupled adenosine A 2A receptors. This contributed to an increase in basal cyclic adenosine monophosphate (cAMP) and vasodilator-stimulated phosphoprotein phosphorylation (VASP-P). In addition, ticagrelor increased platelet cAMP and VASP-P in the absence of ADP in an adenosine receptor-independent manner. We hypothesized that this increase originated from a direct effect on basal agonist-independent P2Y 12 R signaling, and this was validated in 1321N1 cells stably transfected with human P2Y 12 R. In these cells, ticagrelor blocked the constitutive agonist-independent activity of the P2Y 12 R, limiting basal G i -coupled signaling and thereby increasing cAMP levels. These data suggest that ticagrelor has the pharmacological profile of an inverse agonist. Based on our results showing insurmountable inhibition of ADP-induced Ca 2+ release and forskolin-induced cAMP, the mode of antagonism of ticagrelor also appears noncompetitive, at least functionally. In summary, our studies describe 2 novel modes of action of ticagrelor, inhibition of platelet ENT1 and inverse agonism at the P2Y 12 R that contribute to its effective inhibition of platelet activation. © 2016 by The American Society of Hematology.

Calendar Year 2004 Groundwater Monitoring Report, U.S. Department of Energy Y-12 National Security Complex, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

2005-09-01

This report contains the groundwater and surface water monitoring data that were obtained during calendar year (CY) 2004 at the U.S. Department of Energy (DOE) Y-12 National Security Complex (hereafter referenced as Y-12) on the DOE Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee. The CY 2004 monitoring data were obtained from groundwater and surface water sampling locations in three hydrogeologic regimes at Y-12 (Figure A.1). The Bear Creek Hydrogeologic Regime (Bear Creek Regime) encompasses a section of Bear Creek Valley (BCV) between the west end of Y-12 and the west end of the Bear Creek Watershed (directions are inmore » reference to the Y-12 grid system). The Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime) encompasses the Y-12 industrial facilities and support structures in BCV. The Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime) encompasses a section of Chestnut Ridge south of Y-12. The CY 2004 monitoring data were obtained under the Y-12 Groundwater Protection Program (GWPP) managed by BWXT Y-12, L.L.C. (BWXT) and several monitoring programs managed by Bechtel Jacobs Company LLC (BJC). Data contained in this report meet applicable requirements of DOE Order 450.1 (Environmental Protection Program) regarding evaluation of groundwater and surface water quality in areas: (1) which are, or could be, affected by operations at Y-12 (surveillance monitoring); and (2) where contaminants from Y-12 are most likely to migrate beyond the boundaries of the ORR (exit pathway/perimeter monitoring). However, detailed analysis, evaluation, and interpretation of the CY 2004 monitoring data is deferred to the Y-12 Groundwater Protection Program Groundwater Monitoring Data Compendium (BWXT 2005). For each monitoring well, spring, and surface water sampling station included in this report, the GWPP Compendium provides: (1) pertinent well installation and construction information; (2) a complete sampling history, including sampling methods

Calendar years 1989 and 1990 monitoring well installation program Y-12 plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-10-01

This report documents the well-construction activities at the Y-12 Plant in Oak Ridge, Tennessee during 1989 and 1990. The well- construction program consisted of installing seventy-five monitoring wells. Geologists from ERCE (formally the Engineering, Design and Geosciences Group) and Martin Marietta Energy Systems (Energy Systems), supervised and documented well-construction activities and monitored for health and safety concerns. Sixty-seven monitoring wells were installed under the supervision of an ERCE geologist from March 1989 to September 1990. Beginning in September 1990, Energy Systems supervised drilling activities for eight monitoring wells, the last of which was completed in December 1990. 9 refs., 3more » figs., 2 tabs.« less

Stabilization and Solidification of Nitric Acid Effluent Waste at Y-12

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, Dileep; Lorenzo-Martin, Cinta

Consolidated Nuclear Security, LLC (CNS) at the Y-12 plant is investigating approaches for the treatment (stabilization and solidification) of a nitric acid waste effluent that contains uranium. Because the pH of the waste stream is 1-2, it is a difficult waste stream to treat and stabilize by a standard cement-based process. Alternative waste forms are being considered. In this regard, Ceramicrete technology, developed at Argonne National Laboratory, is being explored as an option to solidify and stabilize the nitric acid effluent wastes.

A Holistic Approach to Delivering Sustainable Design Education in Civil Engineering

ERIC Educational Resources Information Center

Vemury, Chandra Mouli; Heidrich, Oliver; Thorpe, Neil; Crosbie, Tracey

2018-01-01

Purpose: The purpose of this paper is to present pedagogical approaches developed and implemented to deliver sustainable design education (SDE) to second-year undergraduate students on civil engineering programmes in the (then) School of Civil Engineering and Geosciences at Newcastle University. In doing so, the work presented offers an example of…

Early versus delayed invasive strategy for intermediate- and high-risk acute coronary syndromes managed without P2Y12 receptor inhibitor pretreatment: Design and rationale of the EARLY randomized trial.

PubMed

Lemesle, Gilles; Laine, Marc; Pankert, Mathieu; Puymirat, Etienne; Cuisset, Thomas; Boueri, Ziad; Maillard, Luc; Armero, Sébastien; Cayla, Guillaume; Bali, Laurent; Motreff, Pascal; Peyre, Jean-Pascal; Paganelli, Franck; Kerbaul, François; Roch, Antoine; Michelet, Pierre; Baumstarck, Karine; Bonello, Laurent

2018-01-01

According to recent literature, pretreatment with a P2Y 12 ADP receptor antagonist before coronary angiography appears no longer suitable in non-ST-segment elevation acute coronary syndrome (NSTE-ACS) due to an unfavorable risk-benefit ratio. Optimal delay of the invasive strategy in this specific context is unknown. We hypothesize that without P2Y 12 ADP receptor antagonist pretreatment, a very early invasive strategy may be beneficial. The EARLY trial (Early or Delayed Revascularization for Intermediate- and High-Risk Non-ST-Segment Elevation Acute Coronary Syndromes?) is a prospective, multicenter, randomized, controlled, open-label, 2-parallel-group study that plans to enroll 740 patients. Patients are eligible if the diagnosis of intermediate- or high-risk NSTE-ACS is made and an invasive strategy intended. Patients are randomized in a 1:1 ratio. In the control group, a delayed strategy is adopted, with the coronary angiography taking place between 12 and 72 hours after randomization. In the experimental group, a very early invasive strategy is performed within 2 hours. A loading dose of a P2Y 12 ADP receptor antagonist is given at the time of intervention in both groups. Recruitment began in September 2016 (n = 558 patients as of October 2017). The primary endpoint is the composite of cardiovascular death and recurrent ischemic events at 1 month. The EARLY trial aims to demonstrate the superiority of a very early invasive strategy compared with a delayed strategy in intermediate- and high-risk NSTE-ACS patients managed without P2Y 12 ADP receptor antagonist pretreatment. © 2018 Wiley Periodicals, Inc.

45. STEEL FRAMING FOR LOFT, Y&D No. 107723 Scales 1/2' ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

45. STEEL FRAMING FOR LOFT, Y&D No. 107723 Scales 1/2' and 1-1/2' = 1'; July 2, 1929 - U.S. Naval Submarine Base, New London Submarine Escape Training Tank, Albacore & Darter Roads, Groton, New London County, CT

Sputtering growth of Y3Fe5O12/Pt bilayers and spin transfer at Y3Fe5O12/Pt interfaces

NASA Astrophysics Data System (ADS)

Chang, Houchen; Liu, Tao; Reifsnyder Hickey, Danielle; Janantha, P. A. Praveen; Mkhoyan, K. Andre; Wu, Mingzhong

2017-12-01

For the majority of previous work on Y3Fe5O12 (YIG)/normal metal (NM) bi-layered structures, the YIG layers were grown on Gd3Ga5O12 first and were then capped by an NM layer. This work demonstrates the sputtering growth of a Pt/YIG structure where the Pt layer was grown first and the YIG layer was then deposited on the top. The YIG layer shows well-oriented (111) texture, a surface roughness of 0.15 nm, and an effective Gilbert damping constant less than 4.7 × 10-4, and the YIG/Pt interface allows for efficient spin transfers. This demonstration indicates the feasibility of fabricating high-quality NM/YIG/NM tri-layered structures for new physics studies.

Sustainable Design: The Next Industrial Revolution?

ERIC Educational Resources Information Center

Baird, Stephen L.

2008-01-01

An insatiable appetite for energy, a burgeoning world population, and a heightened awareness of climate change are focusing global attention on sustainability, an issue that may very well determine the future course of civilization. The pursuit of a sustainable lifestyle today is of paramount importance for future generations. Achieving…

FOSTERING SUSTAINABILITY: DESIGNING A GREEN SCIENCE BUILDING AT A SMALL MAINE COLLEGE

EPA Science Inventory

The overarching goal of the project ‘as to develop a feasibility study of building design and construction that takes into account the various local conditions, optimizes energy savings. use of building materials, and long term sustainability of the structur...

Exploring land developer perspectives on conservation subdivision design and environmentally sustainable land development.

PubMed

Göçmen, Z Aslıgül

2014-11-01

Insight into land developers' perspectives on alternative residential developments and the barriers they experience in trying to develop them can be crucial in efforts to change environmentally damaging low-density, large-lot, and automobile-dependent residential patterns. Using a semi-structured interview instrument followed by short surveys, I examined the views of 16 developers in Waukesha County, WI, USA, a county that has experienced significant development pressures and widespread implementation of conservation subdivision design. The land developer investigation focused on conservation subdivision design familiarity and implementation, and identified a number of barriers that developers experienced in implementing the design. While the majority of the developers appeared familiar with the design and had experience developing conservation subdivisions, their motivations for developing them varied, as did their on-site conservation practices. The barriers included the lack of land use regulations supporting the design, economic factors, community opposition, and a lack of knowledge about sustainable residential development practices. Strategies to promote more environmentally sustainable residential land development patterns include providing a more supportive institutional environment, enacting different regulations and guidelines for natural resources protection, and offering education on ecologically sound development and planning practices.

Exploring Land Developer Perspectives on Conservation Subdivision Design and Environmentally Sustainable Land Development

NASA Astrophysics Data System (ADS)

Göçmen, Z. Aslıgül

2014-11-01

Insight into land developers' perspectives on alternative residential developments and the barriers they experience in trying to develop them can be crucial in efforts to change environmentally damaging low-density, large-lot, and automobile-dependent residential patterns. Using a semi-structured interview instrument followed by short surveys, I examined the views of 16 developers in Waukesha County, WI, USA, a county that has experienced significant development pressures and widespread implementation of conservation subdivision design. The land developer investigation focused on conservation subdivision design familiarity and implementation, and identified a number of barriers that developers experienced in implementing the design. While the majority of the developers appeared familiar with the design and had experience developing conservation subdivisions, their motivations for developing them varied, as did their on-site conservation practices. The barriers included the lack of land use regulations supporting the design, economic factors, community opposition, and a lack of knowledge about sustainable residential development practices. Strategies to promote more environmentally sustainable residential land development patterns include providing a more supportive institutional environment, enacting different regulations and guidelines for natural resources protection, and offering education on ecologically sound development and planning practices.

Continuous-wave and Q-switched microchip laser performance of Yb:Y3Sc2Al3O12 crystals.

PubMed

Dong, Jun; Ueda, Ken-ichi; Kaminskii, Alexander A

2008-04-14

Optical properties of Yb:Y(3)Sc(2)Al(3)O(12) crystal were investigated and compared with those from Yb:YAG crystals. The broad absorption and emission spectra of Yb:Y(3)Sc(2)Al(3)O(12) show that this crystal is very suitable for laser-diode pumping and ultrafast laser pulse generation. Laser-diode pumped continuous-wave and passively Q-switched Yb:Y(3)Sc(2)Al(3)O(12) lasers with Cr(4+):YAG crystals as saturable absorber have been demonstrated for the first time. Continuous-wave output power of 1.12 W around 1032 nm (multi-longitudinal modes) was measured with an optical-to-optical efficiency of 30%. Laser pulses with pulse energy of over 31 microJ and pulse width of 2.5 ns were measured at repetition rate of over 12.7 kHz; a corresponding peak power of over 12 kW was obtained. The longitudinal mode selection by a thin plate of Cr(4+):YAG as an intracavity etalon was also observed in passively Q-switched Yb:Y(3)Sc(2)Al(2)O(12) microchip lasers.

Perfect match? Generation Y as change agents for information communication technology implementation in healthcare.

PubMed

Yee, Kwang Chien; Miils, Erin; Airey, Caroline

2008-01-01

The current healthcare delivery model will not meet future healthcare demands. The only sustainable healthcare future is one that best leverages advances in technology to improve productivity and efficiency. Information communication technology (ICT) has, therefore, been touted as the panacea of future healthcare challenges. Many ICT projects in healthcare, however, fail to deliver on their promises to transform the healthcare system. From a technologist's perspective, this is often due to the lack of socio-technical consideration. From a socio-cultural perspective, however, there is often strong inertia to change. While the utilisation of user-centred design principles will generate a new wave of enthusiasm among technologists, this has to be matched with socio-cultural changes within the healthcare system. Generation Y healthcare workers might be the socio-cultural factor required, in combination with new technology, to transform the healthcare system. Generation Y has generated significant technology-driven changes in many other industries. The socio-cultural understanding of generation Y healthcare workers is essential to guide the design and implementation of ICT solutions for a sustainable healthcare future. This paper presents the initial analysis of our qualitative study which aims to generate in-depth conceptual insights of generation Y healthcare workers and their view of ICT in healthcare. Our results show that generation Y healthcare workers might assist future ICT implementation in healthcare. This paper, however, argues that significant changes to the current healthcare organisation will be required in order to unleash the full potential of generation Y workers and ICT implementation. Finally, this paper presents some strategies to empower generation Y workers as change agents for a sustainable future healthcare system.

Groundwater Protection Program Calendar Year 1998 Groundwater Monitoring Report, U.S. Department of Energy Y-12 Plant, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1999-03-01

This annual monitoring report contains groundwater and surface water monitoring data obtained during calendar year (CY) 1998 by the Lockheed Martin Energy Systems, Inc. Y-12 Plant Groundwater Protection Program (GWPP) at the U.S. Department of Energy (DOE) Oak Ridge Y-12 Plant, Groundwater and surface water monitoring during CY 1998 was performed in three hydrogeologic regimes at the Y-12 Plant: the Bear Creek Hydrogeologic Regime (Bear Creek Regime), the Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime), and the Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime). The Bear Creek and East Fork regimes are located in Bear Creek Valleymore » (BCV), and the Chestnut Ridge Regime which is located south of the Y-12 Plant.« less

Identifying Sustainable Design Opportunities in Tribal Hotels and Casinos: Mescalero Inn of the Mountain Gods Hotel and Casino

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuller, Diana; Martino, Anthony; Begay, Sandra K.

The Indian Gaming Regulatory Act, passed by Congress on October 17, 1988 provided tribes with the Federal statute to pursue gaming activities on tribal lands. Many Native communities contribute to larger regional economies and tourism industries. These casino facilities often include resort-style hotel amenities. Not surprisingly, they are also large consumers of energy, operating 24 hours a day and 7 days a week. Tribes with hotels and casinos can implement sustainable design features and not only receive economic gain, but also environmental and community benefits. The intention of this paper is to identify sustainable design opportunities at the Inn ofmore » the Mountain Gods Hotel and Casino. This research stems from previous work the researcher conducted and subsequently published for the Illinois Green Business Association. First, the paper reviews what sustainable design is and points of interest when considering sustainable construction. Next, the paper explores the precedents set by the Blue Lake Rancheria, Rincon Band of Luiseno Indians, and the Forest County Potawatomi Tribe. Then, the research examines areas to collect baseline information and identify opportunities in sustainable design for the Mescalero Apache Tribe, Inn of the Mountain Gods Hotel and Casino located in New Mexico. Lastly, the work explores the resources and funding options available to the tribe.« less

12 CFR 233.3 - Designated payment systems.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 4 2013-01-01 2013-01-01 false Designated payment systems. 233.3 Section 233.3 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING (REGULATION GG) § 233.3 Designated payment...

12 CFR 233.3 - Designated payment systems.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 4 2014-01-01 2014-01-01 false Designated payment systems. 233.3 Section 233.3 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING (REGULATION GG) § 233.3 Designated payment...

12 CFR 233.3 - Designated payment systems.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 4 2012-01-01 2012-01-01 false Designated payment systems. 233.3 Section 233.3 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING (REGULATION GG) § 233.3 Designated payment...

12 CFR 233.3 - Designated payment systems.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Designated payment systems. 233.3 Section 233.3 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING (REGULATION GG) § 233.3 Designated payment systems. The...

12 CFR 233.3 - Designated payment systems.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Designated payment systems. 233.3 Section 233.3 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM PROHIBITION ON FUNDING OF UNLAWFUL INTERNET GAMBLING (REGULATION GG) § 233.3 Designated payment systems. The...

Sustainable design and manufacturing of multifunctional polymer nanocomposite coatings: A multiscale systems approach

NASA Astrophysics Data System (ADS)

Xiao, Jie

Polymer nanocomposites have a great potential to be a dominant coating material in a wide range of applications in the automotive, aerospace, ship-making, construction, and pharmaceutical industries. However, how to realize design sustainability of this type of nanostructured materials and how to ensure the true optimality of the product quality and process performance in coating manufacturing remain as a mountaintop area. The major challenges arise from the intrinsic multiscale nature of the material-process-product system and the need to manipulate the high levels of complexity and uncertainty in design and manufacturing processes. This research centers on the development of a comprehensive multiscale computational methodology and a computer-aided tool set that can facilitate multifunctional nanocoating design and application from novel function envisioning and idea refinement, to knowledge discovery and design solution derivation, and further to performance testing in industrial applications and life cycle analysis. The principal idea is to achieve exceptional system performance through concurrent characterization and optimization of materials, product and associated manufacturing processes covering a wide range of length and time scales. Multiscale modeling and simulation techniques ranging from microscopic molecular modeling to classical continuum modeling are seamlessly coupled. The tight integration of different methods and theories at individual scales allows the prediction of macroscopic coating performance from the fundamental molecular behavior. Goal-oriented design is also pursued by integrating additional methods for bio-inspired dynamic optimization and computational task management that can be implemented in a hierarchical computing architecture. Furthermore, multiscale systems methodologies are developed to achieve the best possible material application towards sustainable manufacturing. Automotive coating manufacturing, that involves paint spay and

Global sustainability and key needs in future automotive design.

PubMed

McAuley, John W

2003-12-01

The number of light vehicle registrations is forecast to increase worldwide by a factor of 3-5 over the next 50 years. This will dramatically increase environmental impacts worldwide of automobiles and light trucks. If light vehicles are to be environmentally sustainable globally, the automotive industry must implement fundamental changes in future automotive design. Important factors in assessing automobile design needs include fuel economy and reduced emissions. Many design parameters can impact vehicle air emissions and energy consumption including alternative fuel or engine technologies, rolling resistance, aerodynamics, drive train design, friction, and vehicle weight. Of these, vehicle weight is key and will translate into reduced energy demand across all energy distribution elements. A new class of vehicles is needed that combines ultra-light design with a likely hybrid or fuel cell engine technology. This could increase efficiency by a factor of 3-5 and reduce air emissions as well. Advanced lightweight materials, such as plastics or composites, will need to overtake the present metal-based infrastructure. Incorporating design features to facilitate end-of-life recycling and recovery is also important. The trend will be towards fewer materials and parts in vehicle design, combined with ease of disassembly. Mono-material construction can create vehicle design with improved recyclability as well as reduced numbers of parts and weight.

Sustainability as a Design Principle for Composition: Situational Creativity as a Habit of Mind

ERIC Educational Resources Information Center

Newcomb, Matthew

2012-01-01

Design is a rhetorical activity that requires creative thinking in response to difficult situations. That creative work ultimately builds new relationships and new contexts. Sustainable design can become an approach to composition that alters ways of thinking about writing situations, keeping ethical and contextual factors in focus, and…

Expanding lean thinking to the product and process design and development within the framework of sustainability

NASA Astrophysics Data System (ADS)

Sorli, M.; Sopelana, A.; Salgado, M.; Pelaez, G.; Ares, E.

2012-04-01

Companies require tools to change towards a new way of developing and producing innovative products to be manufactured considering the economic, social and environmental impact along the product life cycle. Based on translating Lean principles in Product Development (PD) from the design stage and, along the entire product life cycle, it is aimed to address both sustainability and environmental issues. The drivers of sustainable culture within a lean PD have been identified and a baseline for future research on the development of appropriate tools and techniques has been provided. This research provide industry with a framework which balance environmental and sustainable factors with lean principles to be considered and incorporated from the beginning of product design and development covering the entire product lifecycle.

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 6 2013-10-01 2013-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 6 2014-10-01 2014-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 6 2012-10-01 2012-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

49 CFR 451.12 - Application for approval by design type.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 6 2011-10-01 2011-10-01 false Application for approval by design type. 451.12... Approval of New Containers § 451.12 Application for approval by design type. (a) For approval of new containers by design type, each application must include the following: (1) Engineering drawings and plans...

Cerium LIII-edge x-ray absorption study of the CexFe4-yCoySb12 skutterudites

NASA Astrophysics Data System (ADS)

Grandjean, Fernande; Long, Gary J.; Cortes, Robert; Morelli, Donald T.; Meisner, Gregory P.

2000-11-01

The cerium LIII-edge x-ray absorption near-edge spectra of the CexFe4-yCoySb12 compounds have been obtained at 295 K and unambiguously indicate that cerium is in the 4f1 electronic ground state for all values of 0.22<=x<=0.98 and 0.0<=y<=3.5. This stable trivalent state of cerium is in agreement with the proposed (CeFe4Sb12)1-α(□Co4Sb12)α, solid solution structure, in which the cerium atoms are always surrounded by twelve antimony first neighbors and six iron second neighbors, the observed magnetic properties of CeFe4Sb12 and Ce0.9Fe3CoSb12, and the electronic structure of CeFe4Sb12 obtained from band-structure calculations.

Optical properties of white organic light-emitting devices fabricated utilizing a mixed CaAl12O19:Mn4+ and Y3Al5O12:Ce3+ color conversion layer.

PubMed

Jeong, H S; Kim, S H; Lee, K S; Jeong, J M; Yoo, T W; Kwon, M S; Yoo, K H; Kim, T W

2013-06-01

White organic light-emitting devices (OLEDs) were fabricated by combining a blue OLED with a color conversion layer made of mixed Y3Al5O12:Ce3+ green and Ca2AlO19:Mn4+ red phosphors. The X-ray diffraction patterns showed that Ce3+ ions in the Y3Al5O12:Ce3+ phosphors completely substituted for the Y3+ ions and the Mn4+ ions in the CaAl12O19:Mn4+ phosphors completely substituted for the Ca2+ ions. Electroluminescence spectra at 11 V for the OLEDs fabricated utilizing a color conversion layer showed that the Commission Internationale de l'Eclairage coordinates for the Y3Al5O12:Ce3+ and CaAl12O19:Mn4+ phosphors mixed at the ratio of 1:5 and 1:10 were (0.31, 0.34) and (0.32, 0.37), respectively, indicative of a good white color.

The platelet P2Y(12) receptor under normal and pathological conditions. Assessment with the radiolabeled selective antagonist [(3)H]PSB-0413.

PubMed

Ohlmann, Philippe; Lecchi, Anna; El-Tayeb, Ali; Müller, Christa E; Cattaneo, Marco; Gachet, Christian

2013-03-01

Various radioligands have been used to characterize and quantify the platelet P2Y(12) receptor, which share several weaknesses: (a) they are metabolically unstable and substrates for ectoenzymes, (b) they are agonists, and (c) they do not discriminate between P2Y(1) and P2Y(12). We used the [(3)H]PSB-0413 selective P2Y(12) receptor antagonist radioligand to reevaluate the number of P2Y(12) receptors in intact platelets and in membrane preparations. Studies in humans showed that: (1) [(3)H]PSB-0413 bound to 425 ± 50 sites/platelet (K (D) = 3.3 ± 0.6 nM), (2) 0.5 ± 0.2 pmol [(3)H]PSB-0413 bound to 1 mg protein of platelet membranes (K (D) = 6.5 ± 3.6 nM), and (3) competition studies confirmed the known features of P2Y(12), with the expected rank order of potency: AR-C69931MX > 2MeSADP ≫ ADPβS > ADP, while the P2Y(1) ligand MRS2179 and the P2X(1) ligand α,β-Met-ATP did not displace [(3)H]PSB-0413 binding. Patients with severe P2Y(12) deficiency displayed virtually no binding of [(3)H]PSB-0413 to intact platelets, while a patient with a dysfunctional P2Y(12) receptor had normal binding. Studies in mice showed that: (1) [(3)H]PSB-0413 bound to 634 ± 87 sites/platelet (K (D) = 14 ± 4.5 nM) and (2) 0.7 pmol ± 0.3 [(3)H]PSB-0413 bound to 1 mg protein of platelet membranes (K (D) = 9.1 ± 5.3 nM). Clopidogrel and other thiol reagents like pCMBS or DTT abolished the binding both to intact platelets and membrane preparations. Therefore, [(3)H]PSB-0413 is an accurate and selective tool for radioligand binding studies aimed at quantifying P2Y(12) receptors, to identify patients with P2Y(12) deficiencies or quantify the effect of P2Y(12) targeting drugs.

Sustained 12 Month Benefit of Phrenic Nerve Stimulation for Central Sleep Apnea.

PubMed

Costanzo, Maria Rosa; Ponikowski, Piotr; Javaheri, Shahrokh; Augostini, Ralph; Goldberg, Lee R; Holcomb, Richard; Kao, Andrew; Khayat, Rami N; Oldenburg, Olaf; Stellbrink, Christoph; Abraham, William T

2018-06-01

Transvenous phrenic nerve stimulation improved sleep metrics and quality of life after 6 months versus control in the remedē System Pivotal Trial. This analysis explored the effectiveness of phrenic nerve stimulation in patients with central sleep apnea after 12 months of therapy. Reproducibility of treatment effect was assessed in the former control group in whom the implanted device was initially inactive for the sixth month and subsequently activated when the randomized control assessments were complete. Patients with moderate-to-severe central sleep apnea implanted with the remedē System were randomized to therapy activation at 1 month (treatment) or after 6 months (control). Sleep indices were assessed from baseline to 12 months in the treatment group and from 6 to 12 months in former controls. In the treatment group, a ≥50% reduction in apnea-hypopnea index occurred in 60% of patients at 6 months (95% confidence interval [CI] 47% to 64%) and 67% (95% CI 53% to 78%) at 12 months. After 6 months of therapy, 55% of former controls (95% CI 43% to 67%) achieved ≥50%reduction in apnea-hypopnea index. Patient Global Assessment was markedly ormoderately improved at 6 and 12 months in 60% of treatment patients.Improvements persisted at 12 months. A serious adverse event within 12 months occurred in 13 patients (9%). Phrenic nerve stimulation produced sustained improvements in sleep indices and quality of life to at least 12 months in patients with central sleep apnea. The similar improvement of former controls after 6 months of active therapy confirms benefits are reproducible and reliable. Copyright © 2018 Respicardia, Inc. Published by Elsevier Inc. All rights reserved.

Incidence and Clinical Features of Early Stent Thrombosis in the Era of New P2y12 Inhibitors (PLATIS-2)

PubMed Central

Asher, Elad; Abu-Much, Arsalan; Goldenberg, Ilan; Segev, Amit; Sabbag, Avi; Mazin, Israel; Shlezinger, Meital; Atar, Shaul; Zahger, Doron; Polak, Arthur; Beigel, Roy; Matetzky, Shlomi

2016-01-01

Early stent thrombosis (EST) (≤ 30 days after stent implantation) is a relatively rare but deleterious complication of percutaneous coronary intervention (PCI). Administration of newer P2Y12 inhibitors (prasugrel and ticagrelor) combined with aspirin has been shown to reduce the incidence of sub-acute and late stent thrombosis, compared with clopidogrel. We investigated the “real life” incidence of EST in patients from a large acute coronary syndrome (ACS) national registry, where newer P2Y12 inhibitors are widely used. Patients were derived from the ACS Israeli Survey (ACSIS), conducted during 2006, 2008, 2010 and 2013. Major adverse cardiac events (MACE) at 30days were defined as all-cause death, recurrent ACS, EST and stroke.Of the 4717 ACS patients who underwent PCI and stenting, 83% received clopidogrel and 17% newer P2Y12 inhibitors. The rate of EST was similar in both groups (1.7% in the newer P2Y12 inhibitor group vs. 1.4% in the clopidogrel-treated patients, p = 0.42). Results were consistent after multivariate analysis (adjusted HR = 1.06 [p = 0.89]). MACE occurred in 6.4% in the newer P2Y12 inhibitor group compared with 9.2% in the clopidogrel group (P<0.01). However, multivariate logistic regression modeling showed that treatment with newer P2Y12 inhibitors was not significantly associated with the secondary endpoint of MACE when compared with clopidogrel therapy [OR = 1.26 95%CI (0.93–1.73), P = 0.136]. The incidence of "real life" EST at 1month is relatively low, and appears to be similar in patients who receive newer P2Y12 inhibitors as well as in those who receive clopidogrel. PMID:27310147

Incidence and Clinical Features of Early Stent Thrombosis in the Era of New P2y12 Inhibitors (PLATIS-2).

PubMed

Asher, Elad; Abu-Much, Arsalan; Goldenberg, Ilan; Segev, Amit; Sabbag, Avi; Mazin, Israel; Shlezinger, Meital; Atar, Shaul; Zahger, Doron; Polak, Arthur; Beigel, Roy; Matetzky, Shlomi

2016-01-01

Early stent thrombosis (EST) (≤ 30 days after stent implantation) is a relatively rare but deleterious complication of percutaneous coronary intervention (PCI). Administration of newer P2Y12 inhibitors (prasugrel and ticagrelor) combined with aspirin has been shown to reduce the incidence of sub-acute and late stent thrombosis, compared with clopidogrel. We investigated the "real life" incidence of EST in patients from a large acute coronary syndrome (ACS) national registry, where newer P2Y12 inhibitors are widely used. Patients were derived from the ACS Israeli Survey (ACSIS), conducted during 2006, 2008, 2010 and 2013. Major adverse cardiac events (MACE) at 30days were defined as all-cause death, recurrent ACS, EST and stroke.Of the 4717 ACS patients who underwent PCI and stenting, 83% received clopidogrel and 17% newer P2Y12 inhibitors. The rate of EST was similar in both groups (1.7% in the newer P2Y12 inhibitor group vs. 1.4% in the clopidogrel-treated patients, p = 0.42). Results were consistent after multivariate analysis (adjusted HR = 1.06 [p = 0.89]). MACE occurred in 6.4% in the newer P2Y12 inhibitor group compared with 9.2% in the clopidogrel group (P<0.01). However, multivariate logistic regression modeling showed that treatment with newer P2Y12 inhibitors was not significantly associated with the secondary endpoint of MACE when compared with clopidogrel therapy [OR = 1.26 95%CI (0.93-1.73), P = 0.136]. The incidence of "real life" EST at 1month is relatively low, and appears to be similar in patients who receive newer P2Y12 inhibitors as well as in those who receive clopidogrel.

Development and Application of an Oversize Reusable DOT 7A Type A Overpack Container at the Y-12 National Security Complex - 13150

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tharp, Tim; Martin, David; Franco, Paul

2013-07-01

Waste Management personnel at the Y-12 National Security Complex (Y-12) are concluding a multi-year effort to dispose of a large backlog of low-level waste. Six containers presented a particularly difficult technical challenge in that they each contained large robust equipment (mostly salt baths) with elevated levels of highly enriched uranium (exceeding U.S. Department of Transportation (DOT) fissile-excepted quantities). The equipment was larger than the standard 1.2 m x 1.2 m x 1.8 m (4 ft x 4 ft x 6 ft) DOT Specification 7A Type A box and would have been very difficult to size-reduce because of several inches ofmore » steel plate (along with insulating block and concrete) in the equipment design. A critical breakthrough for the success of the project involved procuring and developing two oversize reusable DOT Specification 7A Type A (fissile tested) containers (referred to as the CTI Model 7AF-690-SC) that could be used as overpacks for the original boxes of equipment. The 7A Type A overpack containers are approximately 3.5 m long x 2.7 m wide x 2.8 m high (11.7 ft x 8.9 ft x 9.2 ft) with a maximum gross weight of 10,660 kg (23,500 lb) and a payload capacity of 6,804 kg (15,000 lbs). The boxes were designed and fabricated using a split cavity design that allowed the gasketed and bolted closure to lie along the horizontal centerline of the box. The central closure location in this design allows for strengthening of box corners that tend to be points of weakness or failure in 49CFR173.465 drop tests. By combining the split cavity design with large diameter tubing and diagonal cross bracing, drop test requirements of 49CFR173.465(1) and (2) were met and demonstrated through finite element analysis modeling. The development and use of this new container dramatically reduced the need for down-sizing the equipment and allowed the project to meet objectives within cost and schedule targets. (authors)« less

Ergonomics and design for sustainability in healthcare: ambient assisted living and the social-environmental impact of patients lifestyle.

PubMed

Andreoni, Giuseppe; Arslan, Pelin; Costa, Fiammetta; Muschiato, Sabrina; Romero, Maximiliano

2012-01-01

This work presents considerations on Ergonomics and Design for Sustainability in the healthcare field based on research experiences of the Technology and Design for Healthcare (TeDH) research group of INDACO (Industrial design, communication, arts and fashion) department of Politecnico di Milano. In order to develop a multidisciplinary approach to design able to answer to specific user needs such as elderly in an environmental sustainable way (1) this paper shows the results we achieved concerning ergonomics and environmental impact in product development (2), the extension of this approach to interior and home design and the advantage of the application of Information Communication Technologies (ICT). ICT can help people with special needs to make their everyday life easier and more safe, at the same time, ICT can make social-environmental impact of everyday behavior evident and can be applied to manage sustainability. The specific theme is thus to integrate ergonomics and sustainability competences in the development of Ambient Assisted Living through a Product- Service System approach. The concept of product service system has the potential to improve product performances and services, establish new relations and networks with different actors in order to satisfy user needs and apply a systems approach considering environmental, social and economic factors in the users' environment.

ASIT--A Problem Solving Strategy for Education and Eco-Friendly Sustainable Design

ERIC Educational Resources Information Center

Turner, Steve

2009-01-01

There is growing recognition of the role teaching and learning experiences in technology education can contribute to Education for Sustainable Development. It appears, however, that in the Technology Education classroom little or no change has been achieved to the practice of designing and problem solving strategies oriented towards sustainable…

Designing sustainable soils in Earth's critical zone

NASA Astrophysics Data System (ADS)

Banwart, Steven Allan; de Souza, Danielle Maia; Menon, Manoj; Nikolaidis, Nikolaos; Panagos, Panos; Vala Ragnardsdottir, Kristin; Rousseva, Svelta; van Gaans, Pauline

2014-05-01

particle aggregation dynamics and organic matter mineralization. Simulation results show that soil structure is highly dynamic and is sensitive to organic matter production and minearlisation rates as influenced by vegetation, tillage and organic carbon amendments. These results point to a step-change in the capability to design soil management and land use through computational simulation. This approach of "sustainability by design" describes the mechanistic process linkages that exist between the above-ground inputs to the CZ and the internal processes that produce soil functions. This approach provides a rational, scientific approach to selecting points of intervention with the CZ in order to design methods to mitigate soil threats and to enhance and sustain vital soil functions. Furthermore, this approach provides a successful pilot study to the use of international networks of CZOs as a planetary-scale laboratory to test the response of CZ process rates along gradients of global environmental change - and to test adaptation strategies to manage the risks arising from the CZ impacts. Acknowledgements. The authors acknowledge the substantial contributions of the entire team of investigators and funding of the SoilTrEC project (EC FP7, agreement no. 244118; www.soiltrec.eu).

Designing green derivatives of β-blocker Metoprolol: a tiered approach for green and sustainable pharmacy and chemistry.

PubMed

Rastogi, Tushar; Leder, Christoph; Kümmerer, Klaus

2014-09-01

The presences of micro-pollutants (active pharmaceutical ingredients, APIs) are increasingly seen as a challenge of the sustainable management of water resources worldwide due to ineffective effluent treatment and other measures for their input prevention. Therefore, novel approaches are needed like designing greener pharmaceuticals, i.e. better biodegradability in the environment. This study addresses a tiered approach of implementing green and sustainable chemistry principles for theoretically designing better biodegradable and pharmacologically improved pharmaceuticals. Photodegradation process coupled with LC-MS(n) analysis and in silico tools such as quantitative structure-activity relationships (QSAR) analysis and molecular docking proved to be a very significant approach for the preliminary stages of designing chemical structures that would fit into the "benign by design" concept in the direction of green and sustainable pharmacy. Metoprolol (MTL) was used as an example, which itself is not readily biodegradable under conditions found in sewage treatment and the aquatic environment. The study provides the theoretical design of new derivatives of MTL which might have the same or improved pharmacological activity and are more degradable in the environment than MTL. However, the in silico toxicity prediction by QSAR of those photo-TPs indicated few of them might be possibly mutagenic and require further testing. This novel approach of theoretically designing 'green' pharmaceuticals can be considered as a step forward towards the green and sustainable pharmacy field. However, more knowledge and further experience have to be collected on the full scope, opportunities and limitations of this approach. Copyright © 2014 Elsevier Ltd. All rights reserved.

INDUSTRIAL ECOLOGY AND SUSTAINABLE SYSTEMS INNOVATION: A STUDENT DESIGN PROJECT ON MOBILITY IN THE POST-AUTOMOBILE ERA

EPA Science Inventory

The emergent field of industrial ecology (IE) has been described as the "science and engineering of sustainability" and the "technological core of sustainability." Some proponents of IE draw on metaphors from systems ecology and suggest that a design revolution is necessary t...

P2Y12 Polymorphisms and the Risk of Adverse Clinical Events in Patients Treated with Clopidogrel: A Meta-Analysis.

PubMed

Zhao, Kun; Yang, Ming; Lu, Yanxia; Sun, Shusen; Li, Wei; Li, Xingang; Zhao, Zhigang

2018-05-23

Some studies have reported an association between P2Y12 gene polymorphisms and clopidogrel adverse outcomes with inconsistent results. We aimed to explore the relationship between P2Y12 polymorphisms and the risk of adverse clinical events in patients treated with clopidogrel through a meta-analysis. A systematic search of PubMed, Web of Science and the Cochrane Library was conducted. Retrieved articles were comprehensively reviewed and eligible studies were included, and the relevant data was extracted for this meta-analysis. All statistical tests were performed by the Review Manager 5.3 software. A total of 14 studies involving 8,698 patients were included. In the Han Chinese population, ischemic events were associated with P2Y12 T744C polymorphism in the CC vs TT+CT genetic model (OR=3.32, 95%CI=1.62-6.82, P =0.001), and the events were associated with P2Y12 C34T polymorphism in the TT+TC vs CC genetic model (OR=1.70, 95%CI=1.22-2.36, P =0.002). However, ischemic events were not related to P2Y12 G52T polymorphism (TT+TG vs GG: OR=1.13, 95%CI=0.76-1.68, P =0.56; TT vs GG+TG: OR=2.02, 95%CI=0.65-6.28, P =0.22). The associations between the P2Y12 polymorphism and ischemic events were not significant in T744C, G52T and C34T genotype for another subgroup of the Caucasian population ( P >0.05). Only two studies referring to bleeding events were included in this analysis of C34T polymorphism, and no significant association was found (TT+TC vs CC: OR=1.07, 95%CI=0.37-3.15, P =0.90). In the Caucasian population, P2Y12 gene polymorphisms are not associated with clinical events. However, in the Chinese Han population, P2Y12 T744C and C34T polymorphisms are significantly associated with adverse clinical events. © Georg Thieme Verlag KG Stuttgart · New York.

The preparation and evaluation of sustained release suppositories containing ketoprofen and Eudragit RL 100 by using factorial design.

PubMed

Ozgüney, I; Ozcan, I; Ertan, G; Güneri, T

2007-01-01

The preparation of ketoprofen (KP) sustained release (SR) suppositories was designed according to the 3(2) x 2(1) factorial design as three different KP:Eudragit RL 100 ratios (1:0.5, 1:1, 1:2), three particle sizes of prepared granules (250-500, 500-710, and 710-1000 microm) and two different PEG 400:PEG 6000 ratios (40:60, 50:50). The conventional KP suppositories were also prepared by using Witepsol H 15, Massa Estarinum B, Cremao and the mixture of PEG 400:PEG 6000. The dissolution studies of suppositories prepared were carried out according to the USP XXIII basket method in the phosphate buffer (pH = 7.2) at 50 rpm, and it was shown that the dissolution time was sustained up to 8 hours. According to the results of the factorial design, the most important independent variable on t50 and t80 was drug:polymer ratios. The log of partition coefficient of KP was determined as 1.46, showing the high affinity to the oily phase. n exponent and kinetic studies were conducted to explain diffusion mechanism, and it is understood that if the inert KP:Eudragit RL 100 ratio is increased in the particles, the Fickian difusion dominates and the best kinetic turns to Higuchi from the Hixson-Crowell. There is neither crystalline form of KP nor degradation product in the suppositories detected with the differential scanning calorimetry (DSC) studies. In addition to these studies, antiinflammatory activity of SR suppositories also determined that it was significantly extended according to the conventional suppositories.

Constitutive Models for Design of Sustainable Concrete Structures

NASA Astrophysics Data System (ADS)

Brozovsky, J.; Cajka, R.; Koktan, J.

2018-04-01

The paper deals with numerical models of reinforced concrete which are expected to be useful to enhance design of sustainable reinforced concrete structures. That is, the models which can deliver higher precision of results than the linear elastic models but which are still feasible for engineering practice. Such models can be based on an elastic-plastic material. The paper discusses properties of such models. A material model based of the Chen criteria and the Ohtani hardening model for concrete was selected for further development. There is also given a comparison of behaviour of such model with behaviour of a more complex smeared crack model which is based on principles of fracture mechanics.

Highly efficient focus formation by Rous sarcoma virus on adenovirus type 12 E1A-transformed rat 3Y1 cells.

PubMed Central

Shiroki, K; Hamaguchi, M; Kawai, S

1992-01-01

When rat 3Y1 cells were infected with Rous sarcoma virus (RSV) variant SR-RSV-D(H), many 3Y1 cells acquired a stable provirus but only few of them formed transformed foci. In contrast, 12E1AY cells (3Y1 cells expressing the adenovirus type 12 [Ad12] E1A protein) formed transformed foci upon RSV infection with the same high frequency as did chicken embryo fibroblast cells. This enhancement of focus-forming efficiency was specifically observed in 3Y1 cells expressing Ad12 E1A protein but was not observed in 3Y1 cells expressing simian virus 40 T, c-myc, p53, c-fos, or v-fos protein. This enhancement was not evident in 5E1AY cells (3Y1 cells expressing the Ad5 E1A protein). Judging from the experiment using Ad12-Ad5 hybird E1A DNAs, the N-terminal half of the Ad12 E1A protein was responsible for this enhancement. The promoter activity of the RSV long terminal repeat measured by pLTR-CAT did not correlate to the efficiency of focus formation by RSV in these 3Y1 cells. Moreover, RSV containing the neo gene instead of the src gene produced G418-resistant cells equally efficiently among 3Y1, E1AY, and chicken embryo fibroblast cells. These results suggest that the enhancement of focus formation by RSV is not due to the increased expression of the src gene by the E1A protein. src mRNA and src protein were lower in RSV-transformed E1AY (RSVE1AY) cells than in RSV-transformed 3Y1 (RSV3Y1) cells. The phosphotyrosine-containing proteins were also less abundant in RSVE1AY cells than in RSV3Y1 cells, suggesting that E1AY cells require a lower threshold dose of p60v-src for transformation than do 3Y1 cells. E1AY cells were found to be more sensitive to lysis by detergents. The results suggest that the enhancement is due to changes in membrane structures in E1AY cells. Images PMID:1310757

Tissue kallikrein induces SH-SY5Y cell proliferation via epidermal growth factor receptor and extracellular signal-regulated kinase1/2 pathway

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Zhengyu; Department of Neurology, Yueyang Hospital of Integrated Traditional Chinese and Western Medicine, Shanghai University of Traditional Chinese Medicine, Shanghai 200437; Yang, Qi

2014-03-28

Highlights: • TK promotes EGFR phosphorylation in SH-SY5Y cells. • TK activates ERK1/2 and p38 phosphorylation in SH-SY5Y cells. • TK mediates SH-SY5Y cell proliferation via EGFR and ERK1/2 pathway. - Abstract: Tissue kallikrein (TK) is well known to take most of its biological functions through bradykinin receptors. In the present study, we found a novel signaling pathway mediated by TK through epidermal growth factor receptor (EGFR) in human SH-SY5Y cells. We discovered that TK facilitated the activation of EGFR, extracellular signal-regulated kinase (ERK) 1/2 and p38 cascade. Interestingly, not p38 but ERK1/2 phosphorylation was severely compromised in cells depletedmore » of EGFR. Nevertheless, impairment of signaling of ERK1/2 seemed not to be restricted to EGFR phosphorylation. We also observed that TK stimulation could induce SH-SY5Y cell proliferation, which was reduced by EGFR down-regulation or ERK1/2 inhibitor. Overall, our findings provided convincing evidence that TK could mediate cell proliferation via EGFR and ERK1/2 pathway in vitro.« less

Nanoparticle-Encapsulated Curcumin Inhibits Diabetic Neuropathic Pain Involving the P2Y12 Receptor in the Dorsal Root Ganglia

PubMed Central

Jia, Tianyu; Rao, Jingan; Zou, Lifang; Zhao, Shanhong; Yi, Zhihua; Wu, Bing; Li, Lin; Yuan, Huilong; Shi, Liran; Zhang, Chunping; Gao, Yun; Liu, Shuangmei; Xu, Hong; Liu, Hui; Liang, Shangdong; Li, Guilin

2018-01-01

Diabetic peripheral neuropathy results in diabetic neuropathic pain (DNP). Satellite glial cells (SGCs) enwrap the neuronal soma in the dorsal root ganglia (DRG). The purinergic 2 (P2) Y12 receptor is expressed on SGCs in the DRG. SGC activation plays an important role in the pathogenesis of DNP. Curcumin has anti-inflammatory and antioxidant properties. Because curcumin has poor metabolic stability in vivo and low bioavailability, nanoparticle-encapsulated curcumin was used to improve its targeting and bioavailability. In the present study, our aim was to investigate the effects of nanoparticle-encapsulated curcumin on DNP mediated by the P2Y12 receptor on SGCs in the rat DRG. Diabetic peripheral neuropathy increased the expression levels of the P2Y12 receptor on SGCs in the DRG and enhanced mechanical and thermal hyperalgesia in rats with diabetes mellitus (DM). Up-regulation of the P2Y12 receptor in SGCs in the DRG increased the production of pro-inflammatory cytokines. Up-regulation of interleukin-1β (IL-1β) and connexin43 (Cx43) resulted in mechanical and thermal hyperalgesia in rats with DM. The nanoparticle-encapsulated curcumin decreased up-regulated IL-1β and Cx43 expression and reduced levels of phosphorylated-Akt (p-Akt) in the DRG of rats with DM. The up-regulation of P2Y12 on SGCs and the up-regulation of the IL-1β and Cx43 in the DRG indicated the activation of SGCs in the DRG. The nano-curcumin treatment inhibited the activation of SGCs accompanied by its anti-inflammatory effect to decrease the up-regulated CGRP expression in the DRG neurons. Therefore, the nanoparticle-encapsulated curcumin treatment decreased the up-regulation of the P2Y12 receptor on SGCs in the DRG and decreased mechanical and thermal hyperalgesia in rats with DM. PMID:29422835

A sustainable landscape ecosystem design: a case study.

PubMed

Huang, Lei-Chang; Ye, Shu-Hong; Gu, Xun; Cao, Fu-Cun; Fan, Zheng-Qiu; Wang, Xiang-Rong; Wu, Ya-Sheng; Wang, Shou-Bing

2010-05-01

Landscape planning is clearly ecologically and socially relevant. Concern about sustainability between human and environment is now a driving paradigm for this professional. However, the explosion of the sustainable landscape in China is a very recent phenomenon. What is the sustainable landscape? How is this realized in practice? In this article, on the basis of the reviews of history and perplexities of Chinese landscape and nature analysis of sustainable landscape, the ecothinking model, an implemental tool for sustainable landscape, was developed, which applies ecothinking in vision, culture, conservation and development of site, and the process of public participation for a harmonious relationship between human and environment. And a case study of the south entrance of TongNiuling Scenic Area was carried out, in which the most optimum scenario was chosen from among three models according to the ecothinking model, to illustrate the construction of the ecothinking model and how to achieve a sustainable landscape.

Meningiomas del foramen magno: Reporte de 12 casos y revisión de la literatura

PubMed Central

Campero, Álvaro; Ajler, Pablo; Roman, Guillermo; Rivadeneira, Conrado

2017-01-01

Resumen Objetivo: El propósito del presente trabajo es presentar los resultados de 12 pacientes con diagnóstico de meningiomas del foramen magno (MFM), de localización anterior o lateral, operados con técnicas microquirúrgicas. Método: Desde Junio de 2005 a Diciembre de 2016, 12 pacientes con diagnóstico de MFM fueron intervenidos quirúrgicamente. Se evaluó: edad, sexo, localización de la lesión (anterior o lateral), sintomatología, tipo de abordaje utilizado y resultados postoperatorios. Resultados: De los pacientes intervenidos, 8 fueron mujeres y 4 varones. La edad promedio fue de 47 años. La localización fue anterior en 8 casos y lateral en 4 casos. La sintomatología más frecuente fue dolor occipito-cervical (8 casos), seguido de tetraparesia (3 casos). En los pacientes con MFM de localización anterior se realizó un abordaje extremo-lateral transcondilar (ELTC), mientras que en los tumores laterales el abordaje fue extremo-lateral retrocondilar (ELRC). En 10 casos la resección fue completa. En dos pacientes fue necesario dejar una pequeña lámina de meningioma sobre la arteria vertebral y a nivel del foramen yugular. Como complicaciones postoperatorias, 3 pacientes presentaron una paresia del XII nervio craneano y 2 pacientes paresia del XI nervio craneano; además, 1 paciente presentó una fístula de LCR. Conclusión: La cirugía de los MFM de localización anterior y lateral puede ser realizada de forma segura y efectiva. Es necesario: a) buen conocimiento anatómico de la región; b) disecar los músculos de la nuca en 2 planos, exponiendo el triángulo suboccipital y la arteria vertebral (AV); 3) realizar un abordaje ELRC en los tumores laterales, y ELTC en los tumores anteriores; y 4) buena técnica microquirúrgica. PMID:29142778

Design and Implementation of Alkali Activated Cement For Sustainable Development

NASA Astrophysics Data System (ADS)

Moseson, Alexander James

Herein, progress is presented on the design and implementation of technology for sustainable development in general and international development in particular. Necessarily interdisciplinary, the work draws upon the tools and techniques of Mechanical, Materials, and Civil Engineering; and History & Politics. The work was conducted along two paths, the first being the theory and methodology of sustainable development. A flexible design and dissemination framework was developed, Technology Seeding, defined as: development by the transfer and participatory adaptation of appropriate proven conceptual designs. The methodology was developed in part through two case studies which implemented, respectively, wood-turning lathes in Tanzania and upland rice planters in Thailand. The second path is the design and investigation of alkali-activated cements (AACs) for practical use. Those developed herein, for US markets, comprise ground granulated blast furnace slag, soda ash (sodium carbonate), and up to 68 wt.% granular limestone. Mixture Design of Experiment (DOE) was utilized to guide empirical and theoretical analysis of performance (e.g. compressive strength), economic & ecological aspects (e.g. cost, CO2 production, energy consumption), and chemistry (e.g. Rietveld analysis of x-ray diffractograms). Models were derived to understand the impact of mix design on performance and for optimization. Successful formulations are hydraulic and cure at room temperature, with strengths as high as 41 MPa at 3 days and 65 MPa at 28 days. Some of these formulations, compared to OPC, are competitive in performance, reduce cost by up to 40%, and reduce both CO2 production and energy consumption by up to 97%. Major chemical products include calcium silicate hydrates / calcium aluminum silicate hydrates (C-(A)-S-H), gaylussite, and calcite (both newly formed and remaining from limestone). Calcite/dolomite and C-(A)-S-H both contribute to strength. A fraction of the limestone is consumed

Modernization at the Y-12 National Security Complex: A Case for Additional Experimental Benchmarks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornbury, M. L.; Juarez, C.; Krass, A. W.

Efforts are underway at the Y-12 National Security Complex (Y-12) to modernize the recovery, purification, and consolidation of un-irradiated, highly enriched uranium metal. Successful integration of advanced technology such as Electrorefining (ER) eliminates many of the intermediate chemistry systems and processes that are the current and historical basis of the nuclear fuel cycle at Y-12. The cost of operations, the inventory of hazardous chemicals, and the volume of waste are significantly reduced by ER. It also introduces unique material forms and compositions related to the chemistry of chloride salts for further consideration in safety analysis and engineering. The work hereinmore » briefly describes recent investigations of nuclear criticality for 235UO2Cl2 (uranyl chloride) and 6LiCl (lithium chloride) in aqueous solution. Of particular interest is the minimum critical mass of highly enriched uranium as a function of the molar ratio of 6Li to 235U. The work herein also briefly describes recent investigations of nuclear criticality for 235U metal reflected by salt mixtures of 6LiCl or 7LiCl (lithium chloride), KCl (potassium chloride), and 235UCl3 or 238UCl3 (uranium tri-chloride). Computational methods for analysis of nuclear criticality safety and published nuclear data are employed in the absence of directly relevant experimental criticality benchmarks.« less

Bioavailability of a Sustained Release Formulation of Curcumin

PubMed Central

Madhavi, Doddabele; Kagan, Daniel

2014-01-01

Context Curcumin has a number of beneficial effects, such as functioning as a potent antioxidant,1 anti-inflammatory, 2 and anticancer agent. Because of its poor oral bioavailability, very high oral doses and repeated dosing have been used to obtain effective plasma levels, with mixed results. High doses of curcumin may cause gastric disturbance, often resulting in poor patient compliance. Objective The objective of this study was to compare the relative bioavailability of MicroActive Curcumin—an advanced, micronized formulation of curcumin that is 25% curcuminoids in a sustained release matrix—with that of an unformulated, 95% pure curcumin powder. Design A dissolution study compared the solubility of the formulated and the unformulated curcumin. The research team also performed a single-dose, 12-h, crossover uptake study with 10 participants and a high-dose tolerability and accumulation study with 3 participants, comparing the 2 forms of curcumin. Setting The study was done in MAZE Laboratories (Purchase, NY, USA). Participants Ten healthy male and female volunteers, aged 21–66 y, took part in the single-dose study. Three participants, 2 female and 1 male aged 40–55 y, took part in the tolerability and accumulation study. The participants were people from the community. Intervention For the dissolution study, the research team filled hard gelatin capsules with unformulated 95% curcumin powder and the MicroActive Curcumin powder to the equivalent of 25 mg curcuminoids. For the single-dose study, participants received 500 mg of curcumin in 2 forms. MicroActive Curcumin capsules were administered after breakfast, and blood samples were drawn at 1, 2, 4, 8, and 12 h postdose. After a 7-d washout period, the protocol was repeated for unformulated, 95% curcumin powder capsules. For the tolerability study, the unformulated, 95% curcumin powder was given at a dose that provided 2 g of curcumin for 7 d followed by 5 g of curcumin for an additional 7 d. After a

Green Design and Sustainable Development of School Uniforms

NASA Astrophysics Data System (ADS)

Cui, Yumei; Fang, Xuemeng; Zhou, Honglei

2018-01-01

Since the 1990s, the school uniform has gradually become an integral part of campus culture construction. A school uniform is not only an iconic symbol of students and a school, but also the carrier of campus culture, with special education function and cultural connotation. However in the same time, many problems exist in the design, making and material selection of school uniforms, in which, substandard fabric quality is the most serious problem. To ensure the quality, health and safety of school uniforms, in my opinion, priority should be given to green design and sustainable development in the design process of school uniforms, which will be more conducive to promoting the sound development of school uniforms. In today’s economic development, the globalization of mass production is no longer just a symbol of challenging the limits of human beings, but to explore the unlimited potential of human spiritual collaboration. If we want to have a better future on this planet, we need to completely redefine the key issue we need to address, that is, green design. The rise of green products is a great progress of human understanding and solving environmental problems. It is the inevitable development trend of commodity production, and will have a profound impact on human survival and development in the future. School uniform is an important part of campus culture construction. In order to not damage the health of primary and secondary school students, in the school uniform design and production process should follow the concept of “green design” to achieve the school uniform style, color, material design, a comprehensive “green” positioning.

Rheological Design of Sustainable Block Copolymers

NASA Astrophysics Data System (ADS)

Mannion, Alexander M.

Block copolymers are extremely versatile materials that microphase separate to give rise to a rich array of complex behavior, making them the ideal platform for the development of rheologically sophisticated soft matter. In line with growing environmental concerns of conventional plastics from petroleum feedstocks, this work focuses on the rheological design of sustainable block copolymers--those derived from renewable sources and are degradable--based on poly(lactide). Although commercially viable, poly(lactide) has a number of inherent deficiencies that result in a host of challenges that require both creative and practical solutions that are cost-effective and amenable to large-scale production. Specifically, this dissertation looks at applications in which both shear and extensional rheology dictate performance attributes, namely chewing gum, pressure-sensitive adhesives, and polymers for blown film extrusion. Structure-property relationships in the context of block polymer architecture, polymer composition, morphology, and branching are explored in depth. The basic principles and fundamental findings presented in this thesis are applicable to a broader range of substances that incorporate block copolymers for which rheology plays a pivotal role.

[Impact of novel P2Y12 receptor inhibitors on platelet reactivity in acute coronary syndrome patients undergoing percutaneous coronary intervention].

PubMed

Chong Tou, T J; Liu, P M; Wang, J F; Sio Cham, Z C; O U, Y F; Lei Sio, Z W; Lei Put, P Z; Lei Sok, S M; Zhou, S X; Wu, W

2016-02-01

To investigate the impact of novel P2Y(12) receptor inhibitors including prasugrel or ticagrelor on platelet reactivity in patients with acute coronary syndrome (ACS) receiving percutaneous coronary intervention (PCI), and provide clinical data for novel oral P2Y(12) receptor inhibitors use among Chinese patients. Between October 2011 to February 2014, 174 consecutive patients (135 males; (67.8±11.8) years old) with ACS undergoing PCI in Kiang Wu Hospital, Macau were prospectively enrolled in this study. Oral aspirin and one P2Y(12) receptor inhibitor were administered for 5 days or above after PCI, patients were divided into clopidogrel, prasugrel and ticagrelor groups in accordance with the agent administered. Platelet reactivity of the patients was detected by VerifyNow P2Y(12) reaction unit (PRU); and the high on-treatment platelet reactivity (HPR) and non-HPR were defined as PRU≥208 and PRU<208 respectively. Patients with HPR during clopidogrel therapy were switched either to prasugrel or ticagrelor, or continued the same treatment; and then the platelet reactivity was monitored again. There were 113 clopidogrel cases (64.9%), 20 prasugrel cases (11.5%) and 41 ticagrelor cases (23.6%). Fifty-seven cases (32.8%) were defined as HPR post P2Y(12) receptor inhibitor use, in which 55 cases (55/113, 48.7%) were treated with clopidogrel. The degree of inhibition of platelet reactivity was significantly different in patients on clopidogrel, prasugrel and ticagrelor therapy, percent inhibition assayed by the VerifyNow P2Y(12) system was 28.2%±23.5%, 61.4%±26.7% and 81.3%±19.8% respectively (P<0.05). Different degree of platelet reactivity was achieved by the 3 P2Y(12) receptor inhibitors at multiple time points. The among-group differences in platelet reactivity became apparent at the early treatment stage (P<0.05). Platelet aggregation decreased significantly in patients switched from clopidogrel to prasugrel or ticagrelor (P<0.05). Novel oral P2Y(12) receptor

Design and characterization of sustained release ketoprofen entrapped carnauba wax microparticles.

PubMed

Oliveira, Rodinelli B; Nascimento, Thais L; Lima, Eliana M

2012-01-01

Ketoprofen is a non-steroid anti-inflammatory drug (NSAID) used in the treatment of rheumatic diseases and in mild to moderate pain. Ketoprofen has a short biological half-life and the commercially available conventional release formulations require dosages to be administered at least 2-3 times a day. Due to these characteristics, ketoprofen is a good candidate for the preparation of controlled release formulations. In this work, a multiparticulate-sustained release dosage form containing ketoprofen in a carnauba wax matrix was developed. Particles were prepared by an emulsion congealing technique. System variables were optimized using fractional factorial and response surface experimental design. Characterization of the particles included size and morphology, flow rate, drug loading and in vitro drug release. Spherical particles were obtained with high drug load and sustained drug release profile. The optimized particles had an average diameter of approximately 200 µm, 50% (w/w) drug load, good flow properties and prolonged ketoprofen release for more than 24 h. Carnauba wax microspheres prepared in this work represent a new multiparticulate-sustained release system for the NSAID ketoprofen, exhibiting good potential for application in further pharmaceutical processes.

75 FR 34657 - Energy Efficiency and Sustainable Design Standards for New Federal Buildings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-18

... Efficiency and Sustainable Design Standards for New Federal Buildings AGENCY: Office of Energy Efficiency and....S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Federal Energy Management... June 11, 2010. Cathy Zoi, Assistant Secretary, Energy Efficiency and Renewable Energy. [FR Doc. 2010...

Direct gap Ge1-ySny alloys: Fabrication and design of mid-IR photodiodes

NASA Astrophysics Data System (ADS)

Senaratne, C. L.; Wallace, P. M.; Gallagher, J. D.; Sims, P. E.; Kouvetakis, J.; Menéndez, J.

2016-07-01

Chemical vapor deposition methods were developed, using stoichiometric reactions of specialty Ge3H8 and SnD4 hydrides, to fabricate Ge1-ySny photodiodes with very high Sn concentrations in the 12%-16% range. A unique aspect of this approach is the compatible reactivity of the compounds at ultra-low temperatures, allowing efficient control and systematic tuning of the alloy composition beyond the direct gap threshold. This crucial property allows the formation of thick supersaturated layers with device-quality material properties. Diodes with composition up to 14% Sn were initially produced on Ge-buffered Si(100) featuring previously optimized n-Ge/i-Ge1-ySny/p-Ge1-zSnz type structures with a single defected interface. The devices exhibited sizable electroluminescence and good rectifying behavior as evidenced by the low dark currents in the I-V measurements. The formation of working diodes with higher Sn content up to 16% Sn was implemented by using more advanced n-Ge1-xSnx/i-Ge1-ySny/p-Ge1-zSnz architectures incorporating Ge1-xSnx intermediate layers (x ˜ 12% Sn) that served to mitigate the lattice mismatch with the Ge platform. This yielded fully coherent diode interfaces devoid of strain relaxation defects. The electrical measurements in this case revealed a sharp increase in reverse-bias dark currents by almost two orders of magnitude, in spite of the comparable crystallinity of the active layers. This observation is attributed to the enhancement of band-to-band tunneling when all the diode layers consist of direct gap materials and thus has implications for the design of light emitting diodes and lasers operating at desirable mid-IR wavelengths. Possible ways to engineer these diode characteristics and improve carrier confinement involve the incorporation of new barrier materials, in particular, ternary Ge1-x-ySixSny alloys. The possibility of achieving type-I structures using binary and ternary alloy combinations is discussed in detail, taking into account

Impact of ticagrelor on P2Y1 and P2Y12 localization and on cholesterol levels in platelet plasma membrane.

PubMed

Rabani, Vahideh; Montange, Damien; Meneveau, Nicolas; Davani, Siamak

2017-10-11

Ticagrelor is an antiplatelet agent that inhibits platelet activation via P2Y12 antagonism. There are several studies showing that P2Y12 needs lipid rafts to be activated, but there are few data about how ticagrelor impacts lipid raft organization. Therefore, we aimed to investigate how ticagrelor could impact the distribution of cholesterol and consequently alter the organization of lipid rafts on platelet plasma membranes. We identified cholesterol-enriched raft fractions in platelet membranes by quantification of their cholesterol levels. Modifications in cholesterol and protein profiles (Flotillin 1, Flotillin 2, CD36, P2Y1, and P2Y12) were studied in platelets stimulated by ADP, treated by ticagrelor, or both. In ADP-stimulated and ticagrelor-treated groups, we found a decreased level of cholesterol in raft fractions of platelet plasma membrane compared to the control group. In addition, the peak of cholesterol in different experimental groups changed its localization on membrane fractions. In the control group, it was situated on fraction 2, while in ADP-stimulated platelets, it was located in fractions 3 to 5, and in fraction 4 in ticagrelor-treated group. The proteins studied also showed changes in their level of expression and localization in fractions of plasma membrane. Cholesterol levels of plasma membranes have a direct role in the organization of platelet membranes and could be modified by stimulation or drug treatment. Since ticagrelor and ADP both changed lipid composition and protein profile, investigating the lipid and protein composition of platelet membranes is of considerable importance as a focus for further research in anti-platelet management.

The Use of Educational Game Design and Play in Higher Education to Influence Sustainable Behaviour

ERIC Educational Resources Information Center

Mercer, Theresa G.; Kythreotis, Andrew P.; Robinson, Zoe P.; Stolte, Terje; George, Sharon M.; Haywood, Stephanie K.

2017-01-01

Purpose: The purpose of this paper is to discuss a novel life cycle approach to education for sustainable development (ESD) where the students become "design thinkers". Design/methodology/approach: A case study on the creation, development and utilisation of educational games by university students is presented. The paper discusses the…

Graphic Design: A Sustainable Solution to Manage the Contents of Teaching Materials

ERIC Educational Resources Information Center

Victor, Garcia Izaguirre; Luisa, Pier Castello Maria; Eduardo, Arvizu Sanchez

2010-01-01

There is a concern that the teaching of subjects is applied not only with support from a set of technological devices, but largely in the proper use of teaching and new technologies. Taking this idea, the authors develop a research and sustainable design that result in educational materials in solid content and technological innovation, also to…

Mix design and mechanical performance of geopolymer binder for sustainable construction and building material

NASA Astrophysics Data System (ADS)

Saeli, Manfredi; Novais, Rui M.; Seabra, Maria Paula; Labrincha, João A.

2017-11-01

Sustainability in construction is a major concern worldwide, due to the huge volume of materials and energy consumed by this sector. Associated supplementing industries (e.g. Portland cement production) constitute a significant source of CO2 emissions and global warming. Valorisation and reuse of industrial wastes and by-products make geopolymers a solid and sustainable via to be followed as a valid alternative to Portland cement. In this work the mix design of a green fly ash-based geopolymer is evaluated as an environmentally friendly construction material. In the pursuit of sustainability, wastes from a regional kraft pulp industry are exploited for the material processing. Furthermore, a simple, reproducible, and low-cost manufacture is used. The mix design is hence optimised in order to improve the desirable mechanical performance of the material intended for structural applications in construction. Tests indicate that geopolymers may efficiently substitute the ordinary Portland cement as a mortar/concrete binder. Furthermore, valorisation and reuse of wastes in geopolymers is a suboptimal way of gaining financial surplus for the involved industrial players, while contributes for the implementation of a desirable circular economy.

Cotton and Sustainability: Impacting Student Learning through Sustainable Cotton Summit

ERIC Educational Resources Information Center

Ha-Brookshire, Jung; Norum, Pamela

2011-01-01

Purpose: The purpose of this paper is to examine the effect of intensive extra-curricular learning opportunities on students' knowledge, skills, and attitudes regarding cotton and sustainability. Design/methodology/approach: A three-phase extra-curricular learning opportunity was designed to include a Sustainable Cotton Summit; pre-summit and…

Impedance spectroscopic and dielectric properties of nanosized Y2/3Cu3Ti4O12 ceramic

NASA Astrophysics Data System (ADS)

Sharma, Sunita; Yadav, Shiv Sundar; Singh, M. M.; Mandal, K. D.

2014-11-01

Yttrium Copper Titanate (Y2/3Cu3Ti4O12) nanoceramic is structurally analogous to CaCu3Ti4O12 (CCTO). X-ray diffraction (XRD) of Y2/3Cu3Ti4O12 (YCTO) shows the presence of all normal peaks of CCTO. SEM micrograph exhibits the presence of bimodal grains of size ranging from 1-2 μm. Bright field TEM image clearly displays nanocrystalline particle which is supported by presence of a few clear rings in the corresponding selected area electron diffraction (SAED) pattern. It exhibits a high value of dielectric constant (ɛ‧ = 8434) at room temperature and 100 Hz frequency with characteristic relaxation peaks. Impedance and modulus studies revealed the presence of temperature-dependent Maxwell-Wagner type of relaxation in the ceramic.

Plan for IER-443 Testing of the Y-12 and AWE Criticality Accident Alarm System Detectors at the Godiva IV Burst Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scorby, J. C.; Hickman, D.; Hudson, B.

This document provides the scope and details of the “Plan for Testing the Y-12 and AWE Criticality Accident Alarm System Detectors at the Godiva IV Burst Reactor”. Due to the relative simplicity of the testing goals, scope, and methodology, the NCSP Manager approved execution of the test when ready. No preliminary CED-1 or final design CED-2 reports were required or issued. The test will subject Criticality Accident Alarm System (CAAS) detectors supplied by Y- 12 and AWE to very intense and short duration mixed neutron and gamma radiation fields. The goals of the test will be to (1) substantiate functionality,more » for both existing and newly acquired Y- 12 CAAS detectors, and (2) the ability of the AWE detectors to provide quality temporal dose information after a hypothetical criticality accident. ANSI/ANS-8.3.1997 states that the “system shall be sufficiently robust as to actuate an alarm signal when exposed to the maximum radiation expected”, which has been defined at Y-12, in Documented Safety Analyses (DSAs), to be a dose rate of 10 Rad/s. ANSI/ANS-8.3.1997 further states that “alarm actuation shall occur as a result of a minimum duration transient” which may be assumed to be 1 msec. The pulse widths and dose rates which will be achieved in this test will exceed these requirements. Pulsed radiation fields will be produced by the Godiva IV fast metal burst reactor at the National Criticality Experimental Research Center (NCERC) at the Nevada National Security Site (NNSS). The magnitude of the pulses and the relative distances to the detectors will be varied to afford a wide range of radiation fluence and pulse widths. The magnitude of the neutron and gamma fields will be determined by reactor temperature rise to fluence and dose conversions which have been previously established through extensive measurements performed under IER-147. The requirements for CAAS systems to detect and alarm under a “minimum accident of concern” as well as other

The Mobile School Health Information Initiative: Creating and Sustaining a Free Curriculum for P-12 Staff to Find Credible Health Information.

PubMed

Olmstadt, William; Hansen, Judy; Engeszer, Robert J

2012-01-01

Three health sciences librarians created a curriculum to connect pre-school - grade 12 (P-12) personnel with credible health information. The course focuses on MedlinePlus® and KidsHealth.org®. They obtained external funding to deliver a revised curriculum for free throughout the metropolitan area. The funded portion of the project reached 93 people at 8 sites. Efforts to sustain the program beyond its funded cycle have reached another 33 people. Evaluations indicate the curriculum successfully equips staff to be health information champions within their schools. Participants report increased confidence locating credible health information. Written comments indicate both short-term gains and sustained use of the knowledge.

12 CFR 568.2 - Designation of security officer.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Designation of security officer. 568.2 Section 568.2 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY SECURITY PROCEDURES § 568.2 Designation of security officer. Within 30 days after the effective date of insurance of...

The Molecular Design of Active Sites in Nanoporous Materials for Sustainable Catalysis.

PubMed

Chapman, Stephanie; Potter, Matthew E; Raja, Robert

2017-12-02

At the forefront of global development, the chemical industry is being confronted by a growing demand for products and services, but also the need to provide these in a manner that is sustainable in the long-term. In facing this challenge, the industry is being revolutionised by advances in catalysis that allow chemical transformations to be performed in a more efficient and economical manner. To this end, molecular design, facilitated by detailed theoretical and empirical studies, has played a pivotal role in creating highly-active and selective heterogeneous catalysts. In this review, the industrially-relevant Beckmann rearrangement is presented as an exemplar of how judicious characterisation and ab initio experiments can be used to understand and optimise nanoporous materials for sustainable catalysis.

Assessing the influence of sustainable trail design and maintenance on soil loss.

PubMed

Marion, Jeffrey L; Wimpey, Jeremy

2017-03-15

Natural-surfaced trail systems are an important infrastructure component providing a means for accessing remote protected natural area destinations. The condition and usability of trails is a critical concern of land managers charged with providing recreational access while preserving natural conditions, and to visitors seeking high quality recreational opportunities and experiences. While an adequate number of trail management publications provide prescriptive guidance for designing, constructing, and maintaining natural-surfaced trails, surprisingly little research has been directed at providing a scientific basis for this guidance. Results from a review of the literature and three scientific studies are presented to model and clarify the influence of factors that substantially influence trail soil loss and that can be manipulated by trail professionals to sustain high traffic while minimizing soil loss over time. Key factors include trail grade, slope alignment angle, tread drainage features, and the amount of rock in tread substrates. A new Trail Sustainability Rating is developed and offered as a tool for evaluating or improving the sustainability of existing or new trails. Published by Elsevier Ltd.

Assessing the influence of sustainable trail design and maintenance on soil loss

USGS Publications Warehouse

Marion, Jeff; Wimpey, Jeremy

2017-01-01

Natural-surfaced trail systems are an important infrastructure component providing a means for accessing remote protected natural area destinations. The condition and usability of trails is a critical concern of land managers charged with providing recreational access while preserving natural conditions, and to visitors seeking high quality recreational opportunities and experiences. While an adequate number of trail management publications provide prescriptive guidance for designing, constructing, and maintaining natural-surfaced trails, surprisingly little research has been directed at providing a scientific basis for this guidance. Results from a review of the literature and three scientific studies are presented to model and clarify the influence of factors that substantially influence trail soil loss and that can be manipulated by trail professionals to sustain high traffic while minimizing soil loss over time. Key factors include trail grade, slope alignment angle, tread drainage features, and the amount of rock in tread substrates. A new Trail Sustainability Rating is developed and offered as a tool for evaluating or improving the sustainability of existing or new trails.

Negative thermal expansion correlated with polyhedral movements and distortions in orthorhombic Y{sub 2}Mo{sub 3}O{sub 12}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Lei; Wang, Fei; Yuan, Peng-Fei

Graphical abstract: Our work confirms the negative thermal expansion (NTE) behavior of the orthorhombic Y{sub 2}Mo{sub 3}O{sub 12} in this range 0–1000 K. The orthorhombic Y{sub 2}Mo{sub 3}O{sub 12} has an open framework structure where MoO{sub 4} tetrahedra and YO{sub 6} octahedra are connected by oxygen atoms. The previous mechanisms for the NTE behavior of orthorhombic Y{sub 2}Mo{sub 3}O{sub 12} are that the translational mode (see (b)) of the O bridge atoms in Y-O-Mo linkages will cause the linkages to be bent, reducing the space between polyhedra and making the volumetric shrinkage. Furthermore, the internal polyhedral distortions have been reportedmore » experimentally. It is necessary to reveal the relationship between NTE and polyhedral movements, distortions. From the vibrational properties, we get that the different vibrational eigenvectors of oxygen atoms relative to Y or Mo atoms can lead internal polyhedra to distort unevenly (see (c)). Herein, an extended 3D model of the connected unit YO{sub 6}-MoO{sub 4} based on the Y-O-Mo linkage is proposed (see (a)). It presents a simultaneous dynamic process, i.e. the YO{sub 6} octahedra and MoO{sub 4} tetrahedra distort unevenly, along with both polyhedra being closer which makes the volumetric contraction. This model is helpful to improve the mechanisms of NTE and may be applied in the whole A{sub 2}M{sub 3}O{sub 12} family. - Highlights: • The NTE properties of Y{sub 2}Mo{sub 3}O{sub 12} are confirmed using a first-principles calculation. • The optical branch with the lowest frequency is most responsible for the NTE. • The relationship between NTE and polyhedral movements, distortions is elucidated. • An extended 3D model of the connected unit YO{sub 6}-MoO{sub 4} is proposed. - Abstract: The internal polyhedral distortions have been reported experimentally in orthorhombic Y{sub 2}Mo{sub 3}O{sub 12} as a negative thermal expansion (NTE) material. To reveal the relationship between NTE and

Students Design Tomorrow's Sustainable Schools and Communities

ERIC Educational Resources Information Center

Schrader, David; Carlson, Michael; Sumlin, John; Worth, Barbara

2011-01-01

Educating for a sustainable future is the imperative of our time. Creative and individual artistic expression helps us all to inform and share with one another. If we hope to fulfill the vision of sustainability as it pertains to environmental, social and economic realities, we must give our students the fluency and the tools to grow into green…

Sustainable Practices in Medicinal Chemistry Part 2: Green by Design.

PubMed

Aliagas, Ignacio; Berger, Raphaëlle; Goldberg, Kristin; Nishimura, Rachel T; Reilly, John; Richardson, Paul; Richter, Daniel; Sherer, Edward C; Sparling, Brian A; Bryan, Marian C

2017-07-27

With the development of ever-expanding synthetic methodologies, a medicinal chemist's toolkit continues to swell. However, with finite time and resources as well as a growing understanding of our field's environment impact, it is critical to refine what can be made to what should be made. This review seeks to highlight multiple cheminformatic approaches in drug discovery that can influence and triage design and execution impacting the likelihood of rapidly generating high-value molecules in a more sustainable manner. This strategy gives chemists the tools to design and refine vast libraries, stress "druglikeness", and rapidly identify SAR trends. Project success, i.e., identification of a clinical candidate, is then reached faster with fewer molecules with the farther-reaching ramification of using fewer resources and generating less waste, thereby helping "green" our field.

Advancing Perspectives of Sustainability and Large-Scale Implementation of Design Teams in Ghana's Polytechnics: Issues and Opportunities

ERIC Educational Resources Information Center

Bakah, Marie Afua Baah; Voogt, Joke M.; Pieters, Jules M.

2012-01-01

Polytechnic staff perspectives are sought on the sustainability and large-scale implementation of design teams (DT), as a means for collaborative curriculum design and teacher professional development in Ghana's polytechnics, months after implementation. Data indicates that teachers still collaborate in DTs for curriculum design and professional…

Campus: "Lab" and "Window" for Sustainable Design Research and Education--The DECOS Educational Network Experience

ERIC Educational Resources Information Center

Vezzoli, Carlo; Penin, Lara

2006-01-01

Purpose: This paper aims to diffuse the concept of a multi-lateral learning process as a means to promote experimental didactics and research (and the cross-fertilization between these two activities) in the field of design of sustainable product-service systems (PSSs) and to consider the university campus as the locus for the design,…

LBNF 1.2 MW Target: Conceptual Design & Fabrication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crowley, C.; Ammigan, K.; Anderson, K.

2015-06-01

Fermilab’s Long-Baseline Neutrino Facility (LBNF) will utilize a modified design based on the NuMI low energy target that is reconfigured to accommodate beam operation at 1.2 MW. Achieving this power with a graphite target material and ancillary systems originally rated for 400 kW requires several design changes and R&D efforts related to material bonding and electrical isolation. Target cooling, structural design, and fabrication techniques must address higher stresses and heat loads that will be present during 1.2 MW operation, as the assembly will be subject to cyclic loads and thermal expansion. Mitigations must be balanced against compromises in neutrino yield.more » Beam monitoring and subsystem instrumentation will be updated and added to ensure confidence in target positioning and monitoring. Remote connection to the target hall support structure must provide for the eventual upgrade to a 2.4 MW target design, without producing excessive radioactive waste or unreasonable exposure to technicians during reconfiguration. Current designs and assembly layouts will be presented, in addition to current findings on processes and possibilities for prototype and final assembly fabrication.« less

LBNF 1.2 MW TARGET: CONCEPTUAL DESIGN & FABRICATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crowley, Cory F.; Ammigan, K.; Anderson, K.

2015-06-29

Fermilab’s Long-Baseline Neutrino Facility (LBNF) will utilize a modified design based on the NuMI low energy target that is reconfigured to accommodate beam operation at 1.2 MW. Achieving this power with a graphite target material and ancillary systems originally rated for 400 kW requires several design changes and R&D efforts related to material bonding and electrical isolation. Target cooling, structural design, and fabrication techniques must address higher stresses and heat loads that will be present during 1.2 MW operation, as the assembly will be subject to cyclic loads and thermal expansion. Mitigations must be balanced against compromises in neutrino yield.more » Beam monitoring and subsystem instrumentation will be updated and added to ensure confidence in target positioning and monitoring. Remote connection to the target hall support structure must provide for the eventual upgrade to a 2.4 MW target design, without producing excessive radioactive waste or unreasonable exposure to technicians during reconfiguration. Current designs and assembly layouts will be presented, in addition to current findings on processes and possibilities for prototype and final assembly fabrication.« less

Fabrication and properties of (TbxY1-x)3Al5O12 transparent ceramics by hot isostatic pressing

NASA Astrophysics Data System (ADS)

Duan, Pingping; Liu, Peng; Xu, Xiaodong; Wang, Wei; Wan, Zhong; Zhang, Shouyi; Wang, Yinzhen; Zhang, Jian

2017-10-01

(TbxY1-x)3Al5O12 (x = 0.2, 0.5, 0.8) transparent ceramics were synthesized by a solid-state reaction and HIP. All the samples were pre-sintered at 1650 °C for 4 h in a muffle and later HIPed at 1650 °C for 3 h. (Tb0.2Y0.8)3Al5O12 transparent ceramics exhibit best microstructure with an average grain size of approximately 5.22 μm and optical transmittance of over 65% in the region of 500-1600 nm. Additionally, average grain sizes of all the samples are less than 10 μm. XRD scanning patterns indicate that only the (Tb0.8Y0.2)3Al5O12 samples have little secondary phases.

Epitaxial patterning of nanometer-thick Y 3Fe 5O 12 films with low magnetic damping

DOE PAGES

Li, Shaozhen; Zhang, Wei; Ding, Junjia; ...

2016-11-27

Magnetic insulators such as yttrium iron garnet, Y 3Fe 5O 12, with extremely low magnetic damping have opened the door for low power spin-orbitronics due to their low energy dissipation and effcient spin current generation and transmission. We demonstrate reliable and effcient epitaxial growth and nanopatterning of Y 3Fe 5O 12 thin-film based nanostructures on insulating Gd 3Ga 5O 12 substrates. In particular, our fabrication process is compatible with conventional sputtering and liftoff, and does not require aggressive ion milling which may be detrimental to the oxide thin films. Structural and magnetic properties indicate good qualities, in particular low magneticmore » damping of both films and patterned structures. The dynamic magnetic properties of the nanostructures are systematically investigated as a function of the lateral dimension. By comparing to ferromagnetic nanowire structures, a distinct edge mode in addition to the main mode is identified by both experiments and simulations, which also exhibits cross-over with the main mode upon varying the width of the wires. In conclusion, the non-linear evolution of dynamic modes over nanostructural dimensions highlights the important role of size confinement to their material properties in magnetic devices where Y 3Fe 5O 12 nanostructures serve as the key functional component.« less

Data sharing policy design for consortia: challenges for sustainability.

PubMed

Kaye, Jane; Hawkins, Naomi

2014-01-01

The field of human genomics has led advances in the sharing of data with a view to facilitating translation of research into innovations for human health. This change in scientific practice has been implemented through new policy developed by many principal investigators, project managers and funders, which has ultimately led to new forms of practice and innovative governance models for data sharing. Here, we examine the development of the governance of data sharing in genomics, and explore some of the key challenges associated with the design and implementation of these policies. We examine how the incremental nature of policy design, the perennial problem of consent, the gridlock caused by multiple and overlapping access systems, the administrative burden and the problems with incentives and acknowledgment all have an impact on the potential for data sharing to be maximized. We conclude by proposing ways in which the scientific community can address these problems, to improve the sustainability of data sharing into the future.

A decision-making tool for incorporating sustainability measures into pavement design : research project capsule.

DOT National Transportation Integrated Search

2016-10-01

The objective of the proposed study is to conceive and develop a decision-making tool : for evaluating sustainability of pavement designs based on a cradle-to-grave analysis. : This tool will utilize EPDs to enhance the reliability of the assessment ...

Brownfields Waterfront Sustainability Pilot, Allentown PA: Technical Memorandum on Conceptual Design Using Low Impact Development

EPA Pesticide Factsheets

This technical memorandum briefly describes the site and the master plan, indicates design constraints considered, specifies recommended LID stormwater techniques and features for sustainable redevelopment of the site, and offers other recommendations.

Y-12 Groundwater Protection Program Groundwater and Surface water Sampling and Analysis Plan for Calendar Year 2006

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

2006-01-01

This plan provides a description of the groundwater and surface water quality monitoring activities planned for calendar year (CY) 2006 at the U.S. Department of Energy (DOE) Y-12 National Security Complex (Y-12) that will be managed by the Y-12 Groundwater Protection Program (GWPP). Groundwater and surface water monitoring performed by the GWPP during CY 2006 will be in accordance with DOE Order 540.1 requirements and the following goals: {sm_bullet} to maintain surveillance of existing and potential groundwater contamination sources; {sm_bullet} to provide for the early detection of groundwater contamination and determine the quality of groundwater and surface water where contaminantsmore » are most likely to migrate beyond the Oak Ridge Reservation property line; {sm_bullet} to identify and characterize long-term trends in groundwater quality at Y-12; and ! to provide data to support decisions concerning the management and protection of groundwater resources. Groundwater and surface water monitoring during CY 2006 will be performed primarily in three hydrogeologic regimes at Y-12: the Bear Creek Hydrogeologic Regime (Bear Creek Regime), the Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime), and the Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime). The Bear Creek and East Fork regimes are located in Bear Creek Valley, and the Chestnut Ridge Regime is located south of Y-12 (Figure A.1). Additional surface water monitoring will be performed north of Pine Ridge, along the boundary of the Oak Ridge Reservation (Figure A.1). Modifications to the CY 2006 monitoring program may be necessary during implementation. Changes in programmatic requirements may alter the analytes specified for selected monitoring wells or may add or remove wells from the planned monitoring network. All modifications to the monitoring program will be approved by the Y-12 GWPP manager and documented as addenda to this sampling and analysis plan. The following

Y-12 Groundwater Protection Program Groundwater And Surface Water Sampling And Analysis Plan For Calendar Year 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elvado Environmental LLC

2009-09-01

This plan provides a description of the groundwater and surface water quality monitoring activities planned for calendar year (CY) 2010 at the U.S. Department of Energy (DOE) Y-12 National Security Complex (Y-12) that will be managed by the Y-12 Groundwater Protection Program (GWPP). Groundwater and surface water monitoring performed by the GWPP during CY 2010 will be in accordance with requirements of DOE Order 540.1A and the following goals: (1) to protect the worker, the public, and the environment; (2) to maintain surveillance of existing and potential groundwater contamination sources; (3) to provide for the early detection of groundwater contaminationmore » and determine the quality of groundwater and surface water where contaminants are most likely to migrate beyond the Oak Ridge Reservation property line; (4) to identify and characterize long-term trends in groundwater quality at Y-12; and (5) to provide data to support decisions concerning the management and protection of groundwater resources. Groundwater and surface water monitoring during CY 2010 will be performed primarily in three hydrogeologic regimes at Y-12: the Bear Creek Hydrogeologic Regime (Bear Creek Regime), the Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime), and the Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime). The Bear Creek and East Fork regimes are located in Bear Creek Valley, and the Chestnut Ridge Regime is located south of Y-12 (Figure A.1). Additional surface water monitoring will be performed north of Pine Ridge, along the boundary of the Oak Ridge Reservation. Modifications to the CY 2010 monitoring program may be necessary during implementation. Changes in programmatic requirements may alter the analytes specified for selected monitoring wells or may add or remove wells from the planned monitoring network. All modifications to the monitoring program will be approved by the Y-12 GWPP manager and documented as addenda to this sampling and

Crosstalk between MLO-Y4 osteocytes and C2C12 muscle cells is mediated by the Wnt/β-catenin pathway.

PubMed

Huang, Jian; Romero-Suarez, Sandra; Lara, Nuria; Mo, Chenglin; Kaja, Simon; Brotto, Leticia; Dallas, Sarah L; Johnson, Mark L; Jähn, Katharina; Bonewald, Lynda F; Brotto, Marco

2017-10-01

We examined the effects of osteocyte secreted factors on myogenesis and muscle function. MLO-Y4 osteocyte-like cell conditioned media (CM) (10%) increased ex vivo soleus muscle contractile force by ~25%. MLO-Y4 and primary osteocyte CM (1-10%) stimulated myogenic differentiation of C2C12 myoblasts, but 10% osteoblast CMs did not enhance C2C12 cell differentiation. Since WNT3a and WNT1 are secreted by osteocytes, and the expression level of Wnt3a is increased in MLO-Y4 cells by fluid flow shear stress, both were compared, showing WNT3a more potent than WNT1 in inducing myogenesis. Treatment of C2C12 myoblasts with WNT3a at concentrations as low as 0.5ng/mL mirrored the effects of both primary osteocyte and MLO-Y4 CM by inducing nuclear translocation of β-catenin with myogenic differentiation, suggesting that Wnts might be potential factors secreted by osteocytes that signal to muscle cells. Knocking down Wnt3a in MLO-Y4 osteocytes inhibited the effect of CM on C2C12 myogenic differentiation. Sclerostin (100ng/mL) inhibited both the effects of MLO-Y4 CM and WNT3a on C2C12 cell differentiation. RT-PCR array results supported the activation of the Wnt/β-catenin pathway by MLO-Y4 CM and WNT3a. These results were confirmed by qPCR showing up-regulation of myogenic markers and two Wnt/β-catenin downstream genes, Numb and Flh1 . We postulated that MLO-Y4 CM/WNT3a could modulate intracellular calcium homeostasis as the trigger mechanism for the enhanced myogenesis and contractile force. MLO-Y4 CM and WNT3a increased caffeine-induced Ca 2+ release from the sarcoplasmic reticulum (SR) of C2C12 myotubes and the expression of genes directly associated with intracellular Ca 2+ signaling and homeostasis. Together, these data show that in vitro and ex vivo , osteocytes can stimulate myogenesis and enhance muscle contractile function and suggest that Wnts could be mediators of bone to muscle signaling, likely via modulation of intracellular Ca 2+ signaling and the Wnt

Sustainable Architecture that Teaches: Promoting Environmental Education through Service-Learning

ERIC Educational Resources Information Center

Eason, Grace; Berger, Rebecca; Green, Pamela Davis

2010-01-01

The University of Maine at Farmington (UMF) has undertaken a commitment to establish a culture of environmental sustainability. With two new Leadership in Energy and Environmental Design (LEED) certified buildings on site, a green building curriculum has been developed. This multidimensional curriculum involves university faculty, students, K-12…

The first sustainable material designed for air particulate matter capture: An introduction to Azure Chemistry.

PubMed

Zanoletti, A; Bilo, F; Depero, L E; Zappa, D; Bontempi, E

2018-07-15

This work presents a new porous material (SUNSPACE) designed for air particulate matter (PM) capture. It was developed in answer to the European Commission request of an innovative, affordable, and sustainable solution, based on design-driven material, to reduce the concentration of air particulate matter in urban areas. SUNSPACE material was developed from by-products and low-cost materials, such as silica fume and sodium alginate. Its capability to catch ultrafine PM was evaluated by different ad-hoc tests, considering diesel exhaust fumes and incense smoke PM. Despite the fact that procedures and materials can be designed for remediation, the high impact on the environment, for example in terms of natural resources consumption and emissions, are not usually considered. Instead, we believe that the technologies must be always evaluated in terms of material embodied energy (EE) and carbon footprint (CF). We define our approach to solve environment problems by a sustainable methodology "Azure Chemistry". For the SUNSPACE synthesis, the multi-criteria decision analysis was performed to select the best sustainable solution. The emissions and the energies involved in the synthesis of SUNSPACE material were evaluated with the Azure Chemistry approach, showing that this could be the best available technology to face the problem of capturing the PM in urban area. Copyright © 2018 Elsevier Ltd. All rights reserved.

The Mobile School Health Information Initiative: Creating and Sustaining a Free Curriculum for P-12 Staff to Find Credible Health Information

PubMed Central

Olmstadt, William; Hansen, Judy; Engeszer, Robert J.

2012-01-01

Three health sciences librarians created a curriculum to connect pre-school – grade 12 (P-12) personnel with credible health information. The course focuses on MedlinePlus® and KidsHealth.org®. They obtained external funding to deliver a revised curriculum for free throughout the metropolitan area. The funded portion of the project reached 93 people at 8 sites. Efforts to sustain the program beyond its funded cycle have reached another 33 people. Evaluations indicate the curriculum successfully equips staff to be health information champions within their schools. Participants report increased confidence locating credible health information. Written comments indicate both short-term gains and sustained use of the knowledge. PMID:23243394

Novel noncoding RNA from human Y distal heterochromatic block (Yq12) generates testis-specific chimeric CDC2L2

PubMed Central

Jehan, Zeenath; Vallinayagam, Sambandam; Tiwari, Shrish; Pradhan, Suman; Singh, Lalji; Suresh, Amritha; Reddy, Hemakumar M.; Ahuja, Y.R.; Jesudasan, Rachel A.

2007-01-01

The human Y chromosome, because it is enriched in repetitive DNA, has been very intractable to genetic and molecular analyses. There is no previous evidence for developmental stage- and testis-specific transcription from the male-specific region of the Y (MSY). Here, we present evidence for the first time for a developmental stage- and testis-specific transcription from MSY distal heterochromatic block. We isolated two novel RNAs, which localize to Yq12 in multiple copies, show testis-specific expression, and lack active X-homologs. Experimental evidence shows that one of the above Yq12 noncoding RNAs (ncRNAs) trans-splices with CDC2L2 mRNA from chromosome 1p36.3 locus to generate a testis-specific chimeric β sv13 isoform. This 67-nt 5′UTR provided by the Yq12 transcript contains within it a Y box protein-binding CCAAT motif, indicating translational regulation of the β sv13 isoform in testis. This is also the first report of trans-splicing between a Y chromosomal and an autosomal transcript. PMID:17095710

The H(2)-receptor antagonist ranitidine interferes with clopidogrel-mediated P2Y(12) inhibition in platelets.

PubMed

Schäfer, Andreas; Flierl, Ulrike; Pförtsch, Stephanie; Seydelmann, Nora; Micka, Jan; Bauersachs, Johann

2010-10-01

Use of proton-pump inhibitors (PPIs) is common in patients on dual antiplatelet therapy (DAT). Recent warnings about potential interactions of PPIs with clopidogrel metabolism leading to impaired DAT efficacy has prompted the recommendation of substituting PPIs with H(2)-receptor antagonists such as ranitidine. We investigated whether ranitidine interacts with P2Y(12) inhibition on the platelet level. Blood was collected from 15 patients with stable coronary artery disease, who had undergone elective coronary intervention. Clopidogrel responsiveness was assessed 24h after the administration of a 600mg loading dose using the P2Y(12) specific platelet-reactivity-index (PRI) and light-transmittance aggregometry in the presence and absence of a pharmacologically relevant concentration of the H(2)-receptor antagonist ranitidine (400ng/ml). Adding ranitidine enhanced P2Y(12)-mediated platelet reactivity to ADP assessed by the PRI (mean PRI+/-SEM: before ranitidine 28+/-5%; after ranitidine 37+/-5%, p=0.0025). Similarly, prostaglandin E1 (PGE(1))-mediated inhibition of ADP-induced aggregation was abrogated in the presence of ranitidine (Agg(max)+/-SEM: before PGE(1) 41+/-2%; after PGE(1) 29+/-2%, p<0.01 vs. before PGE(1); after PGE(1)+ranitidine 42+/-2%, p<0.01 vs. after PGE(1)). Exposition of platelets with ranitidine significantly enhanced their responsiveness to ADP and contributed to impaired P2Y(12) inhibition suggesting that ranitidine interacts with clopidogrel efficacy through adenylyl cyclase inhibition on the platelet level. Copyright 2010 Elsevier Ltd. All rights reserved.

Design of Concept of Sustainable Marketing Communication Strategy for a Ideal Industrial Enterprise and Practical Applications of this Concept

NASA Astrophysics Data System (ADS)

Šujaková, Monika; Golejová, Simona; Sakál, Peter

2017-09-01

In the contribution the authors deal with the design and use of a sustainable marketing communication strategy of an ideal industrial enterprise in the Slovak Republic. The concept of an ideal enterprise is designed to increase the enterprise's sustainable competitiveness through the formation of a corporate image. In the framework of the research, the practical application of the draft concept was realized through a semi-structured interview in the form of propositional logic.

Modernization at the Y-12 National Security Complex: A Case for Additional Experimental Benchmarks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornbury, Matthew

Electrorefining (ER) is a major part of efforts at the Y-12 National Security Complex to revolutionize the reprocessing and purification of enriched uranium (EU). Successful implementation of ER could drastically reduce the operational costs and footprint, hazardous materials use, and waste generation.

Characterization and Disposition of Legacy Low-Level Waste at the Y-12 National Security Complex - 12133

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tharp, Tim; Donnelly, Jim

2012-07-01

The Y-12 National Security Complex (Y-12) is concluding a multi-year program to characterize and dispose of all legacy low-level waste (LLW). The inventory of legacy waste at Y-12 has been reduced from over 3500 containers in Fiscal Year (FY) 2000 to 6 containers at the end of FY2011. In addition, the site recently eliminated the inventory of other low-level waste that is greater than 365 days old (i.e., >365-Day LLW), to be in full compliance with DOE Order 435.1. A consistent technical characterization approach emerged for both of these populations of backlogged waste: (1) compile existing historical data and processmore » knowledge and conduct interviews with site personnel; (2) inspect the containers and any tags, labels, or other markings to confirm or glean additional data; (3) with appropriate monitoring, open the container, visually inspect and photograph the contents while obtaining preliminary radiological surveys; (4) obtain gross weight and field non-destructive assay (NDA) data as needed; (5) use the non-public Oak Ridge Reservation Haul Road to ship the container to a local offsite vendor for waste sorting and segregation; (6) sort, drain, sample, and remove prohibited items; and (7) compile final data and prepare for shipment to disposal. After disposing of this backlog, the focus has now turned to avoiding the recurrence of this situation by maintaining low inventories of low-level waste and shortening the duration between waste generation and disposal. An enhanced waste tracking system and monthly metric charts are used to monitor and report progress to contractor and federal site office management. During the past 2 years, the average age of LLW onsite at Y-12 has decreased from more than 180 days to less than 60 days. (authors)« less

Consequence assessment for Airborne Releases of SO{sub 2} from the Y-12 Pilot Dechlorination Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pendergrass, W.R.

The Atmospheric Turbulence and Diffusion Division was requested by the Department of Energy`s Oak Ridge Operations Office to conduct a consequence assessment for potential atmospheric releases of SO{sub 2} from the Y-12 Pilot Dechlorination Facility. The focus of the assessment was to identify ``worst`` case meteorology which posed the highest concentration exposure potential for both on-site as well as off-site populations. A series of plausible SO{sub 2} release scenarios were provided by Y-12 for the consequence assessment. Each scenario was evaluated for predictions of downwind concentration, estimates of a five-minute time weighted average, and estimate of the dimension of themore » puff. The highest hazard potential was associated with Scenario 1, in which a total of eight SO{sub 2} cylinders are released internally to the Pilot Facility and exhausted through the emergency venting system. A companion effort was also conducted to evaluate the potential for impact of releases of SO{sub 2} from the Pilot Facility on the population of Oak Ridge. While specific transport trajectory data is not available for the Pilot Facility, extrapolations based on the Oak Ridge Site Survey and climatological records from the Y-12 meteorological program does not indicate the potential for impact on the city of Oak Ridge. Steering by the local topographical features severely limits the potential impact ares. Due to the lack of specific observational data, both tracer and meteorological, only inferences can be made concerning impact zones. It is recommended tat the Department of Energy Oak Ridge Operations examine the potential for off-site impact and develop the background data to prepare impact zones for releases of hazardous materials from the Y-12 facility.« less

Robotic Observatory System Design-Specification Considerations for Achieving Long-Term Sustainable Precision Performance

NASA Astrophysics Data System (ADS)

Wray, J. D.

2003-05-01

The robotic observatory telescope must point precisely on the target object, and then track autonomously to a fraction of the FWHM of the system PSF for durations of ten to twenty minutes or more. It must retain this precision while continuing to function at rates approaching thousands of observations per night for all its years of useful life. These stringent requirements raise new challenges unique to robotic telescope systems design. Critical design considerations are driven by the applicability of the above requirements to all systems of the robotic observatory, including telescope and instrument systems, telescope-dome enclosure systems, combined electrical and electronics systems, environmental (e.g. seeing) control systems and integrated computer control software systems. Traditional telescope design considerations include the effects of differential thermal strain, elastic flexure, plastic flexure and slack or backlash with respect to focal stability, optical alignment and angular pointing and tracking precision. Robotic observatory design must holistically encapsulate these traditional considerations within the overall objective of maximized long-term sustainable precision performance. This overall objective is accomplished through combining appropriate mechanical and dynamical system characteristics with a full-time real-time telescope mount model feedback computer control system. Important design considerations include: identifying and reducing quasi-zero-backlash; increasing size to increase precision; directly encoding axis shaft rotation; pointing and tracking operation via real-time feedback between precision mount model and axis mounted encoders; use of monolithic construction whenever appropriate for sustainable mechanical integrity; accelerating dome motion to eliminate repetitive shock; ducting internal telescope air to outside dome; and the principal design criteria: maximizing elastic repeatability while minimizing slack, plastic deformation

Bermuda Triangle or three to tango: generation Y, e-health and knowledge management.

PubMed

Yee, Kwang Chien

2007-01-01

Generation Y workers are slowly gathering critical mass in the healthcare sector. The sustainability of future healthcare is highly dependent on this group of workers. This generation of workers loves technology and thrives in stimulating environments. They have great thirst for life-experience and therefore they move from one working environment to the other. The healthcare system has a hierarchical operational, information and knowledge structure, which unfortunately might not be the ideal ground to integrate with generation Y. The challenges ahead present a fantastic opportunity for electronic health implementation and knowledge management to flourish. Generation Y workers, however, have very different expectation of technology utilisation, technology design and knowledge presentation. This paper will argue that a clear understanding of this group of workers is essential for researchers in health informatics and knowledge management in order to provide socio-technical integrated solution for this group of future workers. The sustainability of a quality healthcare system will depend upon the integration of generation Y, health informatics and knowledge management strategies in a re-invented healthcare system.

Sustainable Learning Organizations

ERIC Educational Resources Information Center

Velazquez, Luis E.; Esquer, Javier; Munguia, Nora E.; Moure-Eraso, Rafael

2011-01-01

Purpose: The purpose of this paper is to debate how companies may better become a sustainable learning organization by offering the most used and insightful concepts of sustainability. Design/methodology/approach: Through literature review, learning organization and sustainability perspectives are explored and compared. Findings: Learning…

50 CFR 424.12 - Criteria for designating critical habitat.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS SUBCHAPTER A LISTING ENDANGERED AND THREATENED SPECIES AND DESIGNATING CRITICAL HABITAT Revision of the Lists § 424.12... species. (f) Critical habitat may be designated for those species listed as threatened or endangered but...

Rational and Safe Design of Concrete Transportation Structures for Size Effect and Multi-Decade Sustainability

DOT National Transportation Integrated Search

2012-10-01

The overall goal of this project was to improve the safety and sustainability in the design of large : prestressed concrete bridges and other transportation structures. The safety of large concrete : structures, including bridges, has been insufficie...

Computer Aided Approach to the Design of Y-Junction Stripline and Microstrip Ferrite Circulators

DTIC Science & Technology

1992-05-05

einO (36) n Jn(kr) J(k) A " kr J~r Finally, the Green’s function is 7 R. E. NEIDERT G(r,op ; R#¢) = X + Y X= j ZeJo(kr) 2 x Jo(kr) (37) IC n Jn(kR) - ’ n ...AD-A251 337 NRL/R ,-92-938I IIIII~ l l li i 1 11 [IIIfll li Computer Aided Approach to the Design of Y -Junction Stripline and Microstrip Ferrite...Aided Approach to the Design of Y -Junction - 62234N Stripline and Microstrip Ferrite Circulators PR - RS34R2 6. AUTHOR(S) WU - 2535-0 Robert E

Co(x)Ni(4-x)Sb(12-y)Sn(y) Ternary Skutterudites: Processing and Thermoelectric Properties

NASA Technical Reports Server (NTRS)

Mackey, Jon; Sehirlioglu, Alp; Dynys, Fred

2014-01-01

Skutterudites have proven to be a useful thermoelectric system as a result of their high figure of merit, favorable mechanical properties, and good thermal stability. Binary skutterudites have received the majority of interest in recent years, as a result of successful double and triple filling schemes. Ternary skutterudites, such as Ni4Sb7Sn5, also demonstrate good thermoelectric performance, with high power factor and low thermal conductivity. Ternary skutterudites, as contrasted to binary systems, provide more possibility for tuning electronic structure as substitutions can be studied on three elements. The Co(x)Ni(4-x)Sb(12-y)Sn(y) system has been investigated as both a p- and n-type thermoelectric material, stable up to 200 C. The system is processed through a combination of solidification, mechanical alloying, and hot pressing steps. Rietveld structure refinement has revealed an interesting occupancy of Sn on both the 24g Wyckoff position with Sb as well as the 2a position as a rattler. In addition to thermoelectric properties, detailed processing routes have been investigated on the system.

P2Y12 Receptor Localizes in the Renal Collecting Duct and Its Blockade Augments Arginine Vasopressin Action and Alleviates Nephrogenic Diabetes Insipidus.

PubMed

Zhang, Yue; Peti-Peterdi, Janos; Müller, Christa E; Carlson, Noel G; Baqi, Younis; Strasburg, David L; Heiney, Kristina M; Villanueva, Karie; Kohan, Donald E; Kishore, Bellamkonda K

2015-12-01

P2Y12 receptor (P2Y12-R) signaling is mediated through Gi, ultimately reducing cellular cAMP levels. Because cAMP is a central modulator of arginine vasopressin (AVP)-induced water transport in the renal collecting duct (CD), we hypothesized that if expressed in the CD, P2Y12-R may play a role in renal handling of water in health and in nephrogenic diabetes insipidus. We found P2Y12-R mRNA expression in rat kidney, and immunolocalized its protein and aquaporin-2 (AQP2) in CD principal cells. Administration of clopidogrel bisulfate, an irreversible inhibitor of P2Y12-R, significantly increased urine concentration and AQP2 protein in the kidneys of Sprague-Dawley rats. Notably, clopidogrel did not alter urine concentration in Brattleboro rats that lack AVP. Clopidogrel administration also significantly ameliorated lithium-induced polyuria, improved urine concentrating ability and AQP2 protein abundance, and reversed the lithium-induced increase in free-water excretion, without decreasing blood or kidney tissue lithium levels. Clopidogrel administration also augmented the lithium-induced increase in urinary AVP excretion and suppressed the lithium-induced increase in urinary nitrates/nitrites (nitric oxide production) and 8-isoprostane (oxidative stress). Furthermore, selective blockade of P2Y12-R by the reversible antagonist PSB-0739 in primary cultures of rat inner medullary CD cells potentiated the expression of AQP2 and AQP3 mRNA, and cAMP production induced by dDAVP (desmopressin). In conclusion, pharmacologic blockade of renal P2Y12-R increases urinary concentrating ability by augmenting the effect of AVP on the kidney and ameliorates lithium-induced NDI by potentiating the action of AVP on the CD. This strategy may offer a novel and effective therapy for lithium-induced NDI. Copyright © 2015 by the American Society of Nephrology.

Effect of a package of health and nutrition services on sustained recovery in children after moderate acute malnutrition and factors related to sustaining recovery: a cluster-randomized trial.

PubMed

Stobaugh, Heather C; Bollinger, Lucy B; Adams, Sara E; Crocker, Audrey H; Grise, Jennifer B; Kennedy, Julie A; Thakwalakwa, Chrissie; Maleta, Kenneth M; Dietzen, Dennis J; Manary, Mark J; Trehan, Indi

2017-08-01

Background: Children who recover from moderate acute malnutrition (MAM) have high rates of relapse in the year after nutritional recovery. Interventions to decrease these adverse outcomes are needed to maximize the overall effectiveness of supplemental feeding programs (SFPs). Objective: We evaluated the effectiveness of a package of health and nutrition interventions on improving the proportion of children who sustained recovery for 1 y after MAM treatment. We further explored factors related to sustained recovery. Design: We conducted a cluster-randomized clinical effectiveness trial involving rural Malawian children aged 6-62 mo who were enrolled on discharge from an SFP for MAM. We enrolled 718 children at 10 control sites and 769 children at 11 intervention sites. In addition to routine health and nutrition counseling, the intervention group received a package of health and nutrition interventions that consisted of a lipid nutrient supplement, deworming medication, zinc supplementation, a bed net, and malaria chemoprophylaxis. A survival analysis was used to determine the effectiveness of the intervention as well as to identify factors associated with sustained recovery. Results: Of 1383 children who returned for the full 12-mo follow-up period, 407 children (56%) and 347 children (53%) sustained recovery in the intervention and control groups, respectively. There was no significant difference in relapse-free survival curves between the treatment and control groups ( P = 0.380; log-rank test). The risk factors for relapse or death after initial recovery were a smaller midupper arm circumference on SFP admission ( P = 0.01) and discharge ( P < 0.001), a lower weight-for-height z score on discharge ( P < 0.01), and the receipt of ready-to-use supplementary food as opposed to ready-to-use therapeutic food during treatment ( P < 0.05). Conclusion: The provision of a package of health and nutrition services in addition to traditional SFP treatment has no

Accelerating Digital Mental Health Research From Early Design and Creation to Successful Implementation and Sustainment

PubMed Central

Lyon, Aaron R; Lattie, Emily G; Reddy, Madhu; Schueller, Stephen M

2017-01-01

Mental health problems are common and pose a tremendous societal burden in terms of cost, morbidity, quality of life, and mortality. The great majority of people experience barriers that prevent access to treatment, aggravated by a lack of mental health specialists. Digital mental health is potentially useful in meeting the treatment needs of large numbers of people. A growing number of efficacy trials have shown strong outcomes for digital mental health treatments. Yet despite their positive findings, there are very few examples of successful implementations and many failures. Although the research-to-practice gap is not unique to digital mental health, the inclusion of technology poses unique challenges. We outline some of the reasons for this gap and propose a collection of methods that can result in sustainable digital mental health interventions. These methods draw from human-computer interaction and implementation science and are integrated into an Accelerated Creation-to-Sustainment (ACTS) model. The ACTS model uses an iterative process that includes 2 basic functions (design and evaluate) across 3 general phases (Create, Trial, and Sustain). The ultimate goal in using the ACTS model is to produce a functioning technology-enabled service (TES) that is sustainable in a real-world treatment setting. We emphasize the importance of the service component because evidence from both research and practice has suggested that human touch is a critical ingredient in the most efficacious and used digital mental health treatments. The Create phase results in at least a minimally viable TES and an implementation blueprint. The Trial phase requires evaluation of both effectiveness and implementation while allowing optimization and continuous quality improvement of the TES and implementation plan. Finally, the Sustainment phase involves the withdrawal of research or donor support, while leaving a functioning, continuously improving TES in place. The ACTS model is a step

Upper critical field of high temperature Y(1.2)Ba(0.8)CuO(4-delta) superconductor

NASA Technical Reports Server (NTRS)

Hor, P. H.; Meng, R. L.; Huang, J. Z.; Chu, C. W.; Huang, C. Y.

1987-01-01

A 20-T high-field magnet is used to measure electrical resistance as a function of temperature in the Y(1.2)Ba(0.8)CuO(4-delta) superconductor. The temperature dependence of the critical field, Hc2(T), is obtained from the superconduction transition. A Hc2(O) value of 166T is determined which is the highest critical field yet reported. Results show Y(1.2)Ba(0.8)CuO(4-delta) to be a 90K Type-II superconductor, with a lower critical field Hc1(O) of about 0.2T and a penetration depth of about 290 A.

Translating Sustainability: The Design of a Secondary Charter School

ERIC Educational Resources Information Center

Hodgkinson, Todd Michael

2011-01-01

Although numerous efforts have been made to enact the concept of sustainability in schools around the world, a single, replicable model of sustainability education fails to exist. Without a replicable model to follow or adapt, educators looking to enact the concept of sustainability are left to their own devices for deciding what this orientation…

Designing a Sustainable Noise Mapping System Based on Citizen Scientists Smartphone Sensor Data.

PubMed

Shim, Eunyoung; Kim, Dohyeong; Woo, Hyekyung; Cho, Youngtae

2016-01-01

In this study, we attempted to assess the feasibility of collecting population health data via mobile devices. Specifically, we constructed noise maps based on sound information monitored by individuals' smartphones. We designed a sustainable way of creating noise maps that can overcome the shortcomings of existing station-based noise-monitoring systems. Three hundred and nine Seoul residents aged 20-49 years who used Android-based smartphones were recruited, and the subjects installed a special application that we developed for this study. This application collected information on sound and geographical location every 10 min for 7 days. Using GIS, we were able to construct various types of noise maps of Seoul (e.g., daytime/nighttime and weekdays/weekends) using the information on sound and geographical location obtained via the users' smartphones. Despite the public health importance of noise management, a number of countries and cities lack a sustainable system to monitor noise. This pilot study showed the possibility of using the smartphones of citizen scientists as an economical and sustainable way of monitoring noise, particularly in an urban context in developing countries.

Sustainability Actions in Australia

ERIC Educational Resources Information Center

Webster, Jenni; Robinson, Leigh; Trimper, Kelvin; Salagaras, Stan

2007-01-01

This article presents Australian case studies of educational buildings with environmentally sustainable designs. This includes the new public school complex for Williamstown High School and the Peel Learning Centre designed for Murdoc University. This article also includes sustainability initiatives by private developers working in collaboration…

Sustainable and safe design of footwear integrating ecological footprint and risk criteria.

PubMed

Herva, Marta; Álvarez, Antonio; Roca, Enrique

2011-09-15

The ecodesign of a product implies that different potential environmental impacts of diverse nature must be taken into account considering its whole life cycle, apart from the general design criteria (i.e. technical, functional, ergonomic, aesthetic or economic). In this sense, a sustainability assessment methodology, ecological footprint (EF), and environmental risk assessment (ERA), were combined for the first time to derive complementary criteria for the ecodesign of footwear. Four models of children's shoes were analyzed and compared. The synthetic shoes obtained a smaller EF (6.5 gm(2)) when compared to the leather shoes (11.1 gm(2)). However, high concentrations of hazardous substances were detected in the former, even making the Hazard Quotient (HQ) and the Cancer Risk (CR) exceed the recommended safety limits for one of the synthetic models analyzed. Risk criteria were prioritized in this case and, consequently, the design proposal was discarded. For the other cases, the perspective provided by the indicators of different nature was balanced to accomplish a fairest evaluation. The selection of fibers produced under sustainable criteria and the reduction of the materials consumption was recommended, since the area requirements would be minimized and the absence of hazardous compounds would ensure safety conditions during the use stage. Copyright © 2011 Elsevier B.V. All rights reserved.

P2Y12 receptor upregulation in satellite glial cells is involved in neuropathic pain induced by HIV glycoprotein 120 and 2',3'-dideoxycytidine.

PubMed

Yi, Zhihua; Xie, Lihui; Zhou, Congfa; Yuan, Huilong; Ouyang, Shuai; Fang, Zhi; Zhao, Shanhong; Jia, Tianyu; Zou, Lifang; Wang, Shouyu; Xue, Yun; Wu, Bing; Gao, Yun; Li, Guilin; Liu, Shuangmei; Xu, Hong; Xu, Changshui; Zhang, Chunping; Liang, Shangdong

2018-03-01

The direct neurotoxicity of HIV and neurotoxicity of combination antiretroviral therapy medications both contribute to the development of neuropathic pain. Activation of satellite glial cells (SGCs) in the dorsal root ganglia (DRG) plays a crucial role in mechanical and thermal hyperalgesia. The P2Y 12 receptor expressed in SGCs of the DRG is involved in pain transmission. In this study, we explored the role of the P2Y 12 receptor in neuropathic pain induced by HIV envelope glycoprotein 120 (gp120) combined with ddC (2',3'-dideoxycytidine). A rat model of gp120+ddC-induced neuropathic pain was used. Peripheral nerve exposure to HIV-gp120+ddC increased mechanical and thermal hyperalgesia in gp120+ddC-treated model rats. The gp120+ddC treatment increased expression of P2Y 12 receptor mRNA and protein in DRG SGCs. In primary cultured DRG SGCs treated with gp120+ddC, the levels of [Ca 2+ ] i activated by the P2Y 12 receptor agonist 2-(Methylthio) adenosine 5'-diphosphate trisodium salt (2-MeSADP) were significantly increased. P2Y 12 receptor shRNA treatment inhibited 2-MeSADP-induced [Ca 2+ ] i in primary cultured DRG SGCs treated with gp120+ddC. Intrathecal treatment with a shRNA against P2Y 12 receptor in DRG SGCs reduced the release of pro-inflammatory cytokines, decreased phosphorylation of p38 MAPK in the DRG of gp120+ddC-treated rats. Thus, downregulating the P2Y 12 receptor relieved mechanical and thermal hyperalgesia in gp120+ddC-treated rats.

Atomistic Design of Favored Compositions for Synthesizing the Al-Ni-Y Metallic Glasses

PubMed Central

Wang, Q.; Li, J. H.; Liu, J. B.; Liu, B. X.

2015-01-01

For a ternary alloy system promising for obtaining the so-called bulk metallic glasses (BMGs), the first priority issue is to predict the favored compositions, which could then serve as guidance for the appropriate alloy design. Taking the Al-Ni-Y system as an example, here we show an atomistic approach, which is developed based on a recently constructed and proven realistic interatomic potential of the system. Applying the Al-Ni-Y potential, series simulations not only clarify the glass formation mechanism, but also predict in the composition triangle, a hexagonal region, in which a disordered state, i.e., the glassy phase, is favored energetically. The predicted region is defined as glass formation region (GFR) for the ternary alloy system. Moreover, the approach is able to calculate an amorphization driving force (ADF) for each possible glassy alloy located within the GFR. The calculations predict an optimized sub-region nearby a stoichiometry of Al80Ni5Y15, implying that the Al-Ni-Y metallic glasses designed in the sub-region could be the most stable. Interestingly, the atomistic predictions are supported by experimental results observed in the Al-Ni-Y system. In addition, structural origin underlying the stability of the Al-Ni-Y metallic glasses is also discussed in terms of a hybrid packing mode in the medium-range scale. PMID:26592568

Atomistic Design of Favored Compositions for Synthesizing the Al-Ni-Y Metallic Glasses

NASA Astrophysics Data System (ADS)

Wang, Q.; Li, J. H.; Liu, J. B.; Liu, B. X.

2015-11-01

For a ternary alloy system promising for obtaining the so-called bulk metallic glasses (BMGs), the first priority issue is to predict the favored compositions, which could then serve as guidance for the appropriate alloy design. Taking the Al-Ni-Y system as an example, here we show an atomistic approach, which is developed based on a recently constructed and proven realistic interatomic potential of the system. Applying the Al-Ni-Y potential, series simulations not only clarify the glass formation mechanism, but also predict in the composition triangle, a hexagonal region, in which a disordered state, i.e., the glassy phase, is favored energetically. The predicted region is defined as glass formation region (GFR) for the ternary alloy system. Moreover, the approach is able to calculate an amorphization driving force (ADF) for each possible glassy alloy located within the GFR. The calculations predict an optimized sub-region nearby a stoichiometry of Al80Ni5Y15, implying that the Al-Ni-Y metallic glasses designed in the sub-region could be the most stable. Interestingly, the atomistic predictions are supported by experimental results observed in the Al-Ni-Y system. In addition, structural origin underlying the stability of the Al-Ni-Y metallic glasses is also discussed in terms of a hybrid packing mode in the medium-range scale.

Effect of surface modification on photoluminescence properties of Y3Al5O12:Ce3+, Gd3+ nano-phosphors.

PubMed

Li, Jie; Zhao, Junfu; Zhou, Hefeng; Liang, Jian; Liu, Xuguang; Xu, Bingshe

2011-04-01

In this study, a series of Y(3)Al(5)O(12):Ce(3+), Gd(3+) nano-phosphors were prepared using a simply wet chemical process with polyvinyl pyrrolidone as a modifier. The crystal and bonding structures of Y(3)Al(5)O(12):Ce(3+), Gd(3+) nano-phosphors prepared with different weight percentages of polyvinyl pyrrolidone were characterized by X-ray diffractometry and infrared spectrometry. The decomposition process of dried precursor gel with adding 1.37 wt% polyvinyl pyrrolidone was investigated by differential thermal and thermogravimetric analysis. The effect of surface modification on photoluminescence properties for the samples was studied. The results show that the steric hindrance effect of polyvinyl pyrrolidone leads to high dispersion and good crystallinity of Y(3)Al(5)O(12):Ce(3+), Gd(3+) nano-phosphors prepared with adding a proper weight percentages of polyvinyl pyrrolidone. Adding polyvinyl pyrrolidone is beneficial for the photoluminescence enhancement of the samples, which is attributed to the promotion of the incorporation of Ce(3+) and Gd(3+) into the Y(3)Al(5)O(12) nanocrystal and the surface passivation of the nano-particles by the polyvinyl pyrrolidone molecules. Copyright © 2011 Elsevier B.V. All rights reserved.

2003 Y-12 National Security Complex Annual Illness and Injury Surveillance Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy, Office of Health, Safety and Security, Office of Illness and Injury Prevention Programs

2007-05-23

Annual Illness and Injury Surveillance Program report for 2003 for Y-12. The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The IISP monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

Use of an intravitreal sustained-release cyclosporine delivery device for treatment of equine recurrent uveitis.

PubMed

Gilger, B C; Wilkie, D A; Davidson, M G; Allen, J B

2001-12-01

To evaluate the use of an intravitreal sustained-release cyclosporine (CsA) delivery device for treatment of horses with naturally occurring recurrent uveitis. 16 horses with recurrent uveitis. Horses with frequent recurrent episodes of uveitis or with disease that was progressing despite appropriate medication were selected for this study. Additional inclusion criteria included adequate retinal function as determined by use of electroretinography, lack of severe cataract formation, and no vision-threatening ocular complications (eg, retinal detachment, severe retinal degeneration, and posterior synechia). Sustained-release CsA delivery devices (4 microg of CsA/d) were implanted into the vitreous through a sclerotomy at the pars plana. Reexaminations were performed 1, 3, 6, and 12 months after implantation, then continued annually. Ophthalmic changes, number of recurrent episodes of uveitis, and vision were recorded. The rate of recurrent episodes after device implantation (0.36 episodes/y) was less than prior to surgery (75 episodes/y). In addition, only 3 horses developed episodes of recurrent uveitis after surgery. Vision was detected in 14 of 16 affected eyes at a mean follow-up time of 13.8 months (range, 6 to 24 months). This intravitreal sustained-release CsA delivery device may be a safe and important tool for long-term treatment of horses with chronic recurrent uveitis.

Poor adherence to P2Y12 antagonists increased cardiovascular risks in Chinese PCI-treated patients.

PubMed

Sun, Yang; Li, Chenze; Zhang, Lina; Hu, Dong; Zhang, Xudong; Yu, Ting; Tao, Min; Wang, Dao Wen; Shen, Xiaoqing

2017-03-01

Low adherence to secondary prevention medications (ATM) of patients after acute coronary syndrome (ACS) is associated with poor clinical outcomes. However, literature provides limited data on assessment of ATM and risks associated with poor in Chinese patients with ACS. In the current work, ATM was assessed in consecutively recruited patients with ACS in Tongji Hospital from November 5, 2013 to December 31, 2014. A total of 2126 patients were classified under low adherence (proportion of days covered (PDC) C< 50%) and high adherence (PDC>50%) groups based on their performance after discharge. All patients were followed up at the 1st, 6th, and 12th month of discharge while recording ATM and major adverse cardiac events (MACE). Bivariate logistic regression was used to identify the factors associated with ATM. Cox regression was used to analyze the association between ATM and MACE within one year after discharge. Results showed that coronary artery bypass grafting (CABG) alone had significantly lower proportion of high adherence to P2Y12 antagonists (83.0% vs. 90.7%, P < 0.01) than patients treated with percutaneous coronary intervention (PCI) only. Moreover, in patients undergoing PCI, high adherence to P2Y12 antagonists decreased the risk of MACE (hazard ratio = 0.172, 95% confidence interval: 0.039-0.763; P = 0.021). In conclusion, PCI-treated patients are more prone to remaining adherent to medications than CABG-treated patients. High adherence to P2Y12 antagonists was associated with lower risk of MACE.

Greenhouse Affect: The Relationship between the Sustainable Design of Schools and Children's Environmental Attitudes

ERIC Educational Resources Information Center

Izadpanahi, Parisa; Elkadi, Hisham; Tucker, Richard

2017-01-01

This study aims to determine if primary school children's environmental attitudes can be predicted by whether their school had been designed or adapted for sustainability. A New Ecological Paradigm ("NEP") scale for children was adopted to measure attitudes, with supplementary questions added to align this scale to the Australian context…

Conscientious Consumerism: A Curriculum Pilot to Support the Sustainable Development Goals

ERIC Educational Resources Information Center

Crawford, Elizabeth O.; Montague, Laura

2017-01-01

How can teachers integrate the UN Sustainable Development Goals into their classrooms? A teacher and teacher educator duo provide a wonderfully detailed account of how they designed and implemented a curriculum focused on SDG Goal 12, Responsible Consumption and Production. Through their journey to empower children to be critical and compassionate…

Integrating Materials, Manufacturing, Design and Validation for Sustainability in Future Transport Systems

NASA Astrophysics Data System (ADS)

Price, M. A.; Murphy, A.; Butterfield, J.; McCool, R.; Fleck, R.

2011-05-01

The predictive methods currently used for material specification, component design and the development of manufacturing processes, need to evolve beyond the current `metal centric' state of the art, if advanced composites are to realise their potential in delivering sustainable transport solutions. There are however, significant technical challenges associated with this process. Deteriorating environmental, political, economic and social conditions across the globe have resulted in unprecedented pressures to improve the operational efficiency of the manufacturing sector generally and to change perceptions regarding the environmental credentials of transport systems in particular. There is a need to apply new technologies and develop new capabilities to ensure commercial sustainability in the face of twenty first century economic and climatic conditions as well as transport market demands. A major technology gap exists between design, analysis and manufacturing processes in both the OEMs, and the smaller companies that make up the SME based supply chain. As regulatory requirements align with environmental needs, manufacturers are increasingly responsible for the broader lifecycle aspects of vehicle performance. These include not only manufacture and supply but disposal and re-use or re-cycling. In order to make advances in the reduction of emissions coupled with improved economic efficiency through the provision of advanced lightweight vehicles, four key challenges are identified as follows: Material systems, Manufacturing systems, Integrated design methods using digital manufacturing tools and Validation systems. This paper presents a project which has been designed to address these four key issues, using at its core, a digital framework for the creation and management of key parameters related to the lifecycle performance of thermoplastic composite parts and structures. It aims to provide capability for the proposition, definition, evaluation and demonstration of

Integrating Sustainability Science with the Sciences of Human Well-being to Inform Design and Planning in an Urbanizing World

NASA Astrophysics Data System (ADS)

Alberti, M.; Graumlich, L. J.; Frumkin, H.; Friedman, D.

2012-12-01

A sustainable human future requires both healthy ecosystems and communities in which people thrive, with opportunities for health, well-being, happiness, economic prosperity, and equity. To make progress towards this goal, two largely disparate communities of scholars and practitioners must come together: sustainability science needs to be integrated with the sciences of human health and well-being. The opportunity for such integration is particularly ripe for urbanizing regions which not only dominate energy and resource use but also increasingly represent the human habitat. We present a conceptual framework that integrates sustainability science with the sciences of human health and well-being to explicitly articulate testable hypotheses on the relationships between humans and their habitat. We are interested in human behaviors and metrics of health and well-being in relationship to the characteristics of the built environment at various scales from buildings to metro regions. Focusing on the U.S. Pacific Northwest (PNW) as a testbed, we are building on our current empirical studies on urban sprawl and ecosystem function including biodiversity, air quality, hydrological, biogeochemical, and human health to develop formal hypotheses on how alternative urban design and development patterns may influence health outcomes and well-being. The PNW is an ideal setting for this work because of the connected metropolitan areas within a region characterized by a spectacular diversity of aquatic and terrestrial ecosystems and deeply held cultural and political aspirations towards sustainability. The framework also highlights opportunities for translation of knowledge to practice in the design and planning of built environments. For example, understanding these associations is critical to assessing tradeoffs in design and planning strategies and exploring potential synergies that optimize both sustainability and human well-being. In complex systems such as cities, managers

Magneto-optical properties of BaCryFe12-yO19 (0.0 ≤ y ≤ 1.0) hexaferrites

NASA Astrophysics Data System (ADS)

Asiri, S.; Güner, S.; Korkmaz, A. D.; Amir, Md.; Batoo, K. M.; Almessiere, M. A.; Gungunes, H.; Sözeri, H.; Baykal, A.

2018-04-01

In this study, nanocrystalline BaCryFe12-yO19 (0.0 ≤ y ≤ 1.0) hexaferrite powders were prepared by sol-gel auto combustion method and the effect of Cr3+ ion substitution on morphology, structure, optic and magnetic properties of Barium hexaferrite were investigated. X-ray powder diffraction (XRD) analyses confirmed the purity of all samples. The XRD data shows that the average crystallite size lies between 60.95 nm and 50.10 nm and same was confirmed by Transmission electron microscopy. Transmission electron and scanning electron microscopy analyses presented the hexagonal morphology of all products. The characteristic hysteresis (σ-H) curves proved the ferromagnetic feature of as grown nanoparticle samples. Specific saturation magnetization (σs) drops from 46.59 to 34.89 emu/g with increasing Cr content while the coercive field values lie between 770 and 1652 Oe. The large magnitude of the magnetocrystalline (intrinsic) anisotropy field, (Ha) between 11.0 and 12.6 kOe proves that all products are magnetically hard. The energy band gap values decrease from 2.0 eV to 1.84 eV with increasing Cr content. From 57Fe Mössbauer spectroscopy, the variation in line width, isomer shift, quadrupole splitting and hyperfine magnetic field values were determined and discussed.

Synthesis and characterization of a NaSICON series with general formula Na 2.8Zr 2-ySi 1.8-4yP 1.2+4yO 12 (0⩽ y⩽0.45)

NASA Astrophysics Data System (ADS)

Essoumhi, A.; Favotto, C.; Mansori, M.; Satre, P.

2004-12-01

In this work, we present the synthesis and the characterization of ionic conducting ceramics of NaSICON-type (Natrium super ionic conductor). The properties of this ceramic make it suitable for use in electrochemical devices. These solid electrolytes can be used as sensors for application in the manufacturing of potentiometric gas sensors, for the detection of pollutant emissions and for environment control. The family of NaSICON that we studied has as a general formula Na 2.8Zr 2-ySi 1.8-4yP 1.2+4yO 12 with 0⩽ y⩽0.45. The various compositions were synthesized by produced using the sol-gel method. The electric properties of these compositions were carried out by impedance spectroscopy. The results highlight the good conductivity of the Na 2.8Zr 1.775Si 0.9P 2.1O 12 composition.

Comparative Long-Term Effect of Three Anti-P2Y12 Drugs after Percutaneous Angioplasty: An Observational Study Based on Electronic Drug Adherence Monitoring

PubMed Central

Forni Ogna, Valentina; Bassi, Isabelle; Menetrey, Isabelle; Muller, Olivier; Tousset, Eric; Fontana, Pierre; Eeckhout, Eric; Eap, Chin B.; Vrijens, Bernard; Burnier, Michel; Wuerzner, Grégoire

2017-01-01

Aims: Dual platelet inhibition using anti-P2Y12 drugs and aspirin is the standard of care in patients after percutaneous coronary interventions (PCI). Prasugrel and ticagrelor have been shown to be more potent than clopidogrel with less high on-treatment platelet reactivity. Whether differences in long-term adherence to these drugs can partly explain different antiplatelet efficacy has not been studied so far. The objective was to compare the long-term P2Y12 receptor inhibition and drug adherence to different anti-P2Y12 drugs, and to assess the impact of adherence on the pharmacodynamic effect. Methods: Monocentric, prospective, observational study. Stable outpatients treated with clopidogrel 75 mg once daily, prasugrel 10 mg once daily or ticagrelor 90 mg twice daily after PCI with stent implantation were included. Drug adherence was recorded during 6 months using electronic monitoring. Platelet responsiveness was assessed with the vasodilator-stimulated phosphoprotein platelet reactivity index (VASP-PRI) at inclusion, 3 and 6 months. Results: 120 patients had VASP-PRI and adherence data available. At 6-months, mean VASP-PRI (±SD) was 17.7 ± 11.0% with ticagrelor, 29.2 ± 15.5% with prasugrel and 47.2 ± 17.6% with clopidogrel (ANOVA, P < 0.0001). Median [IQR] taking adherence was 96 [82–100]% with ticagrelor, 100 [97–101]% with prasugrel and 100 [99–101]% with clopidogrel (p = 0.0001). Median [IQR] correct dosing was 88 [73–95]% with ticagrelor, 97 [92.5–98]% with prasugrel and 98 [96–99]% with clopidogrel (p = 0.0001). Anti-P2Y12 drug (p ≤ 0.001) and diabetes (p = 0.014) emerged as predictors of poor antiplatelet response after adjusting for age, BMI, sex, and CYP2C19∗2 carriers status. Conclusion: Drug adherence to anti-P2Y12 drugs assessed with electronic monitoring was very high. However, anti-P2Y12 drugs showed significant differences in antiplatelet activity, with newer anti-P2Y12 drugs ticagrelor and prasugrel exerting a stronger P2Y12

Design, Sustainable Synthesis, and Programmed Reactions of Templated N-Heteroaryl-Fused Vinyl Sultams.

PubMed

Laha, Joydev K; Sharma, Shubhra; Kirar, Seema; Banerjee, Uttam C

2017-09-15

A de novo design and synthesis of N-heteroaryl-fused vinyl sultams as templates for programming chemical reactions on vinyl sultam periphery or (hetero)aryl ring is described. The key features include rational designing and sustainable synthesis of the template, customized reactions of vinyl sultams at C═C bond or involving N-S bond cleavage, and reactions on the periphery of the heteroaryl ring for late-stage diversification. The simple, easy access to the template coupled with opportunities for the synthesis of diversely functionalized heterocyles from a single template constitutes a rare study in contemporary organic synthesis.

Sustained delivery of VEGF from designer self-assembling peptides improves cardiac function after myocardial infarction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Hai-dong; Cui, Guo-hong; Yang, Jia-jun

Highlights: Black-Right-Pointing-Pointer The designer peptide LRKKLGKA could self-assemble into nanofibers. Black-Right-Pointing-Pointer Injection of LRKKLGKA peptides could promote the sustained delivery of VEGF. Black-Right-Pointing-Pointer Injection of VEGF with LRKKLGKA peptides lead to sufficient angiogenesis. Black-Right-Pointing-Pointer Injection of VEGF with LRKKLGKA peptides improves heart function. -- Abstract: Poor vascularization and insufficient oxygen supply are detrimental to the survival of residual cardiomyocytes or transplanted stem cells after myocardial infarction. To prolong and slow the release of angiogenic factors, which stimulate both angiogenesis and vasculogenesis, we constructed a novel self-assembling peptide by attaching the heparin-binding domain sequence LRKKLGKA to the self-assembling peptide RADA16. Thismore » designer self-assembling peptide self-assembled into nanofiber scaffolds under physiological conditions, as observed by atomic force microscopy. The injection of designer self-assembling peptides can efficiently provide the sustained delivery of VEGF for at least 1 month. At 4 weeks after transplantation, cardiac function was improved, and scar size and collagen deposition were markedly reduced in the group receiving VEGF with the LRKKLGKA scaffolds compared with groups receiving VEGF alone, LRKKLGKA scaffolds alone or VEGF with RADA16 scaffolds. The microvessel density in the VEGF with LRKKLGKA group was higher than that in the VEGF with RADA16 group. TUNEL and cleaved caspase-3 expression assays showed that the transplantation of VEGF with LRKKLGKA enhanced cell survival in the infarcted heart. These results present the tailor-made peptide scaffolds as a new generation of sustained-release biomimetic biomaterials and suggest that the use of angiogenic factors along with designer self-assembling peptides can lead to myocardial protection, sufficient angiogenesis, and improvement in cardiac function.« less

Towards an Understanding of the Social Aspects of Sustainability in Product Design: Teaching HE Students in the UK and Ireland through Reflection and Peer Learning

ERIC Educational Resources Information Center

Watkins, Matthew

2014-01-01

This paper presents findings from a doctoral study, which investigated effective methods for teaching social sustainability within product design courses in British and Irish universities. This paper explores approaches for encouraging students to explore the social aspects of sustainable product design through workshops specifically designed to…

Dual Target Design for CLAS12

NASA Astrophysics Data System (ADS)

Alam, Omair; Gilfoyle, Gerard; Christo, Steve

2015-10-01

An experiment to measure the neutron magnetic form factor (GnM) is planned for the new CLAS12 detector in Hall B at Jefferson Lab. This form factor will be extracted from the ratio of the quasielastic electron-neutron to electron-proton scattering off a liquid deuterium (LD2) target. A collinear liquid hydrogen (LH2) target will be used to measure efficiencies at the same time as production data is collected from the LD2 target. To test target designs we have simulated CLAS12 and the target geometry. Electron-nucleon events are produced first with the QUasiElastic Event Generator (QUEEG) which models the internal motion of the nucleons in deuterium.1 The results are used as input to the CLAS12 Monte Caro code gemc; a Geant4-based program that simulates the particle's interactions with each component of CLAS12 including the target material. The dual target geometry has been added to gemc including support structures and cryogenic transport systems. A Perl script was written to define the target materials and geometries. The output of the script is a set of database entries read by gemc at runtime. An initial study of the impact of this dual-target structure revealed limited effects on the electron momentum and angular resolutions. Work supported by the University of Richmond and the US Department of Energy.

Engaging Sustainability Good Practice within the Curriculum Design and Property Portfolio in the Australian Higher Education Sector

ERIC Educational Resources Information Center

Poon, Joanna

2017-01-01

Purpose: The purpose of this paper is to evaluate the extent to which universities' strategic plans affect the level of incorporation of sustainability within the curriculum design and property portfolio. Design/Methodology/Approach: This research adopted a case study approach. The case study institution was Deakin University in Australia. This…

[Theories and methodologies of engineering designs on sustainable agricultural land consolidation project--a case study of Xuemeiyang land consolidation project in Changtai County, Fujian Province].

PubMed

Ye, Yanmei; Wu, Cifang; Cheng, Chengbiao; Qiu, Lingzhang; Huang, Shengyu; Zheng, Ruihui

2002-09-01

The concept and characteristics of engineering designs on sustainable agricultural land consolidation project were discussed in this paper. Principles, basic methods and procedures of engineering designs on agricultural land consolidation project were put forward, which were successfully adopted for designing agricultural land consolidation in Xuemeiyang region of Changtai County, including diversity designs of sustainable land use, engineering designs of soil improvement, roads, ditches, and drains for protecting existent animal environments, and design of ecological shelter-forests in farmland. Moreover, from sustainable economic, ecological and social points, the results of these engineering designs were evaluated based on fouteen important indexes. After carrying out these engineeringdesigns, the eco-environments and agricultural production conditions were significantly improved, and the farm income was increased in planned regions.

Detection of platelet sensitivity to inhibitors of COX-1, P2Y1, and P2Y12 using a whole blood microfluidic flow assay

PubMed Central

Li, Ruizhi; Diamond, Scott L.

2014-01-01

BACKGROUND Microfluidic devices recreate the hemodynamic conditions of thrombosis. METHODS Whole blood inhibited with PPACK was treated ex vivo with inhibitors and perfused over collagen for 300 s (wall shear rate = 200 s−1) using a microfluidic flow assay. Platelet accumulation was measured in the presence of COX-1 inhibitor (aspirin, ASA), P2Y1 inhibitor (MRS 2179), P2Y12 inhibitor (2MeSAMP) or combined P2Y1 and P2Y12 inhibitors. RESULTS High dose ASA (500 μM), 2MeSAMP (100 μM), MRS 2179 (10 μM),or combined 2MeSAMP and MRS 2179 decreased total platelet accumulation by 27.5%, 75.6%, 77.7%, and 87.9% (p < 0.01), respectively. ASA reduced secondary aggregation rate between 150 and 300 s without effect on primary deposition rate on collagen from 60 to 150 s. In contrast, 2MeSAMP and MRS 2179 acted earlier and reduced primary deposition to collagen between 60 and 105 s and secondary aggregation between 105 and 300 s. RCOX and RP2Y (defined as a ratio of secondary aggregation rate to primary deposition rate) demonstrated 9 of 10 subjects had RCOX < 1 or RP2Y < 1 following ASA or 2MeSAMP addition, while 6 of 10 subjects had RP2Y < 1 following MRS 2179 addition. Combined MRS 2179 and 2MeSAMP inhibited primary platelet deposition rate and platelet secondary aggregation beyond that of each individual inhibitor. Receiver-Operator Characteristic area under the curve (AUC) indicated the robustness of RCOX and RP2Y to detect inhibition of secondary platelet aggregation by ASA, 2MeSAMP, and MRS 2179 (AUC of 0.874 0.966, and 0.889, respectively). CONCLUSIONS Microfluidic devices can detect platelet sensitivity to antiplatelet agents. The R-value can serve as a self-normalized metric of platelet function for a single blood sample. PMID:24365044

Proposed strategies for designing sustainable high-rise apartment buildings in Ho Chi Minh City responding to critical urban issues

NASA Astrophysics Data System (ADS)

Truong, Nguyen Hoang Long; Huan Giang, Ngoc; Binh Duong, Trong

2018-03-01

This paper aims at finding practical strategies for designing sustainable high-rise apartment buildings in Ho Chi Minh City responding to varied municipal issues. Two steps are made. Step-1 identifies the critical issues of Ho Chi Minh City which are associated with high-rise apartment building projects. Step-2 finds potential and applicable strategies which are solutions for the critical issues in Step-1 with reference of seven selected assessment methods. The study finds the set of 58 strategies applicable to designing sustainable high-rise apartment buildings in Ho Chi Minh City.

Engineering design skills coverage in K-12 engineering program curriculum materials in the USA

NASA Astrophysics Data System (ADS)

Chabalengula, Vivien M.; Mumba, Frackson

2017-11-01

The current K-12 Science Education framework and Next Generation Science Standards (NGSS) in the United States emphasise the integration of engineering design in science instruction to promote scientific literacy and engineering design skills among students. As such, many engineering education programmes have developed curriculum materials that are being used in K-12 settings. However, little is known about the nature and extent to which engineering design skills outlined in NGSS are addressed in these K-12 engineering education programme curriculum materials. We analysed nine K-12 engineering education programmes for the nature and extent of engineering design skills coverage. Results show that developing possible solutions and actual designing of prototypes were the highly covered engineering design skills; specification of clear goals, criteria, and constraints received medium coverage; defining and identifying an engineering problem; optimising the design solution; and demonstrating how a prototype works, and making iterations to improve designs were lowly covered. These trends were similar across grade levels and across discipline-specific curriculum materials. These results have implications on engineering design-integrated science teaching and learning in K-12 settings.

Effects of Baicalin on Diabetic Cardiac Autonomic Neuropathy Mediated by the P2Y12 Receptor in Rat Stellate Ganglia.

PubMed

Sheng, Xuan; Wang, Jiayue; Guo, Jingjing; Xu, Yurong; Jiang, Huaide; Zheng, Chaoran; Xu, Zixi; Zhang, Yuanruohan; Che, Hongyu; Liang, Shangdong; Zhu, Gaochun; Li, Guilin

2018-01-01

Chronic diabetic hyperglycemia can damage various of organ systems and cause serious complications. Although diabetic cardiac autonomic neuropathy (DCAN) is the primary cause of death in diabetic patients, its pathogenesis remains to be fully elucidated. Baicalin is a flavonoid extracted from Scutellaria baicalensis root and has antibacterial, diuretic, anti-inflammatory, anti- metamorphotic, and antispasmodic effects. Our study explored the effects of baicalin on enhancing sympathoexcitatory response induced by DCAN via the P2Y12 receptor. A type 2 diabetes mellitus rat model was induced by a combination of diet and streptozotocin. Serum epinephrine was measured by enzyme-linked immunosorbent assay. Blood pressure and heart rate were measured using the indirect tail-cuff method. Heart rate variability was analyzed using the frequency-domain of electrocardiogram recordings. The expression levels of P2Y12, interleukin-1beta (IL-1β), tumor necrosis factor alpha (TNF-α), and connexin 43 (Cx43) were determined by quantitative real-time reverse transcription-polymerase chain reaction and western blotting. The interaction between baicalin and P2Y12 determined using by molecular docking. Baicalin alleviated elevated blood pressure and heart rate, improved heart rate variability, and decreased the elevated expression levels of P2Y12, IL-1β, TNF-α, and Cx43 in the stellate ganglia of diabetic rats. Baicalin also reduced the elevated concentration of serum epinephrine and the phosphorylation of p38 mitogen-activated protein kinase in diabetic rats. Baicalin decreases sympathetic activity by inhibiting the P2Y12 receptor in stellate ganglia satellite glial cells to maintain the balance between sympathetic and parasympathetic nerves and relieves DCAN in the rat. © 2018 The Author(s). Published by S. Karger AG, Basel.

Sustainable IT and IT for Sustainability

NASA Astrophysics Data System (ADS)

Liu, Zhenhua

Energy and sustainability have become one of the most critical issues of our generation. While the abundant potential of renewable energy such as solar and wind provides a real opportunity for sustainability, their intermittency and uncertainty present a daunting operating challenge. This thesis aims to develop analytical models, deployable algorithms, and real systems to enable efficient integration of renewable energy into complex distributed systems with limited information. The first thrust of the thesis is to make IT systems more sustainable by facilitating the integration of renewable energy into these systems. IT represents the fastest growing sectors in energy usage and greenhouse gas pollution. Over the last decade there are dramatic improvements in the energy efficiency of IT systems, but the efficiency improvements do not necessarily lead to reduction in energy consumption because more servers are demanded. Further, little effort has been put in making IT more sustainable, and most of the improvements are from improved "engineering" rather than improved "algorithms". In contrast, my work focuses on developing algorithms with rigorous theoretical analysis that improve the sustainability of IT. In particular, this thesis seeks to exploit the flexibilities of cloud workloads both (i) in time by scheduling delay-tolerant workloads and (ii) in space by routing requests to geographically diverse data centers. These opportunities allow data centers to adaptively respond to renewable availability, varying cooling efficiency, and fluctuating energy prices, while still meeting performance requirements. The design of the enabling algorithms is however very challenging because of limited information, non-smooth objective functions and the need for distributed control. Novel distributed algorithms are developed with theoretically provable guarantees to enable the "follow the renewables" routing. Moving from theory to practice, I helped HP design and implement

Small Schools in the Big City: Neoliberalism, Bureaucracy and the Sustainability of Small by Design Schools in Chicago

ERIC Educational Resources Information Center

Pitluck, Corrin

2010-01-01

Assuming the strength of small by design schools for poor urban students of color to be a settled question, this project attempts to analyze the sustainability of small by design schools in a large, complex urban district. Asking what causes small schools to converge toward or diverge from the small by design model, I analyze three sets of design…

Designing a Sustainable Noise Mapping System Based on Citizen Scientists Smartphone Sensor Data

PubMed Central

Shim, Eunyoung; Kim, Dohyeong; Woo, Hyekyung; Cho, Youngtae

2016-01-01

In this study, we attempted to assess the feasibility of collecting population health data via mobile devices. Specifically, we constructed noise maps based on sound information monitored by individuals’ smartphones. We designed a sustainable way of creating noise maps that can overcome the shortcomings of existing station-based noise-monitoring systems. Three hundred and nine Seoul residents aged 20–49 years who used Android-based smartphones were recruited, and the subjects installed a special application that we developed for this study. This application collected information on sound and geographical location every 10 min for 7 days. Using GIS, we were able to construct various types of noise maps of Seoul (e.g., daytime/nighttime and weekdays/weekends) using the information on sound and geographical location obtained via the users’ smartphones. Despite the public health importance of noise management, a number of countries and cities lack a sustainable system to monitor noise. This pilot study showed the possibility of using the smartphones of citizen scientists as an economical and sustainable way of monitoring noise, particularly in an urban context in developing countries. PMID:27626273

41 CFR 102-76.55 - What sustainable development principles must Federal agencies apply to the siting, design, and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What sustainable...? 102-76.55 Section 102-76.55 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 76-DESIGN AND CONSTRUCTION Design...

Accelerating Digital Mental Health Research From Early Design and Creation to Successful Implementation and Sustainment.

PubMed

Mohr, David C; Lyon, Aaron R; Lattie, Emily G; Reddy, Madhu; Schueller, Stephen M

2017-05-10

Mental health problems are common and pose a tremendous societal burden in terms of cost, morbidity, quality of life, and mortality. The great majority of people experience barriers that prevent access to treatment, aggravated by a lack of mental health specialists. Digital mental health is potentially useful in meeting the treatment needs of large numbers of people. A growing number of efficacy trials have shown strong outcomes for digital mental health treatments. Yet despite their positive findings, there are very few examples of successful implementations and many failures. Although the research-to-practice gap is not unique to digital mental health, the inclusion of technology poses unique challenges. We outline some of the reasons for this gap and propose a collection of methods that can result in sustainable digital mental health interventions. These methods draw from human-computer interaction and implementation science and are integrated into an Accelerated Creation-to-Sustainment (ACTS) model. The ACTS model uses an iterative process that includes 2 basic functions (design and evaluate) across 3 general phases (Create, Trial, and Sustain). The ultimate goal in using the ACTS model is to produce a functioning technology-enabled service (TES) that is sustainable in a real-world treatment setting. We emphasize the importance of the service component because evidence from both research and practice has suggested that human touch is a critical ingredient in the most efficacious and used digital mental health treatments. The Create phase results in at least a minimally viable TES and an implementation blueprint. The Trial phase requires evaluation of both effectiveness and implementation while allowing optimization and continuous quality improvement of the TES and implementation plan. Finally, the Sustainment phase involves the withdrawal of research or donor support, while leaving a functioning, continuously improving TES in place. The ACTS model is a step

Fragment-Based Optimization of Small Molecule CXCL12 Inhibitors for Antagonizing the CXCL12/CXCR4 Interaction

PubMed Central

Ziarek, Joshua J.; Liu, Yan; Smith, Emmanuel; Zhang, Guolin; Peterson, Francis C.; Chen, Jun; Yu, Yongping; Chen, Yu; Volkman, Brian F.; Li, Rongshi

2013-01-01

The chemokine CXCL12 and its G protein-coupled receptor (GPCR) CXCR4 are high-priority clinical targets because of their involvement in metastatic cancers (also implicated in autoimmune disease and cardiovascular disease). Because chemokines interact with two distinct sites to bind and activate their receptors, both the GPCRs and chemokines are potential targets for small molecule inhibition. A number of chemokines have been validated as targets for drug development, but virtually all drug discovery efforts focus on the GPCRs. However, all CXCR4 receptor antagonists with the exception of MSX-122 have failed in clinical trials due to unmanageable toxicities, emphasizing the need for alternative strategies to interfere with CXCL12/CXCR4-guided metastatic homing. Although targeting the relatively featureless surface of CXCL12 was presumed to be challenging, focusing efforts at the sulfotyrosine (sY) binding pockets proved successful for procuring initial hits. Using a hybrid structure-based in silico/NMR screening strategy, we recently identified a ligand that occludes the receptor recognition site. From this initial hit, we designed a small fragment library containing only nine tetrazole derivatives using a fragment-based and bioisostere approach to target the sY binding sites of CXCL12. Compound binding modes and affinities were studied by 2D NMR spectroscopy, X-ray crystallography, molecular docking and cell-based functional assays. Our results demonstrate that the sY binding sites are conducive to the development of high affinity inhibitors with better ligand efficiency (LE) than typical protein-protein interaction inhibitors (LE ≤ 0.24). Our novel tetrazole-based fragment 18 was identified to bind the sY21 site with a Kd of 24 μM (LE = 0.30). Optimization of 18 yielded compound 25 which specifically inhibits CXCL12-induced migration with an improvement in potency over the initial hit 9. The fragment from this library that exhibited the highest affinity and

Sustainable Design Guidelines for the Construction of New Facilities and the Renovation of Existing Structures.

ERIC Educational Resources Information Center

Dorsey, Judy; L'Esperance, Clare

This guide summarizes research conducted at Colorado's Poudre School District (PSD) to develop guidelines for the desired performance outcomes from employing sustainable educational facility design, and it suggests approaches for attaining them. The guide also provides case studies and references to further investigate opportunities on specific…

Generation and characterization of point defects in SrTiO3 and Y3Al5O12

NASA Astrophysics Data System (ADS)

Selim, F. A.; Winarski, D.; Varney, C. R.; Tarun, M. C.; Ji, Jianfeng; McCluskey, M. D.

Positron annihilation lifetime spectroscopy (PALS) was applied to characterize point defects in single crystals of Y3Al5O12 and SrTiO3 after populating different types of defects by relevant thermal treatments. In SrTiO3, PALS measurements identified Sr vacancy, Ti vacancy, vacancy complexes of Ti-O (vacancy) and hydrogen complex defects. In Y3Al5O12 single crystals the measurements showed the presence of Al-vacancy, (Al-O) vacancy and Al-vacancy passivated by hydrogen. These defects are shown to play the major role in defining the electronic and optical properties of these complex oxides.

Remedial Investigation Report on Chestnut Ridge Operable Unit 2 (Filled Coal Ash Pond/Upper McCoy Branch) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 1. Main Text

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-08-01

This document is a report on the remedial investigation (RI) of Chestnut Ridge Operable Unit (OU) 2 at the Oak Ridge Y-12 Plant. Chestnut Ridge OU 2 consists of Upper McCoy Branch (UMB), the Filled Coal Ash Pond (FCAP), and the area surrounding the Sluice Channel formerly associated with coal ash disposal in the FCAP. Chestnut Ridge OU 2 is located within the U.S. Department of Energy`s (DOE`s) Oak Ridge Reservation in Anderson County, Tennessee, approximately 24 miles west of Knoxville. The pond is an 8.5-acre area on the southern slope of Chestnut Ridge, 0.5 mile south of the mainmore » Y-12 Plant and geographically separated from the Y-12 Plant by Chestnut Ridge. The elevation of the FCAP is {approximately} 950 ft above mean sea level (msl), and it is relatively flat and largely vegetated. Two small ponds are usually present at the northeast and northwest comers of the FCAP. The Sluice Channel Area extends {approximately}1000 ft from the northern margin of the FCAP to the crest of Chestnut Ridge, which has an elevation of {approximately}1100 ft above msl. The Sluice Channel Area is largely vegetated also. McCoy Branch runs from the top of Chestnut Ridge across the FCAP into Rogers Quarry and out of the quarry where it runs a short distance into Milton Hill Lake at McCoy Embayment, termed UMB. The portion south of Rogers Quarry, within Chestnut Ridge OU 4, is termed Lower McCoy Branch. The DOE Oak Ridge Y-12 Plant disposed of coal ash from its steam plant operations as a slurry that was discharged into an ash retention impoundment; this impoundment is the FCAP. The FCAP was built in 1955 to serve as a settling basin after coal ash slurried over Chestnut Ridge from the Y-12 Plant. The FCAP was constructed by building an earthen dam across the northern tributary of McCoy Branch. The dam was designed to hold 20 years of Y-12 steam plant ash. By July 1967, ash had filled up the impoundment storage behind the dam to within 4 ft of the top.« less

Crystalline and magnetooptical characteristics of (Tb,Bi)3(Fe,Ga)5O12 deposited on (Y,Nd)3Al5O12

NASA Astrophysics Data System (ADS)

Morimoto, Ryohei; Goto, Taichi; Nakamura, Yuichi; Boey Lim, Pang; Uchida, Hironaga; Inoue, Mitsuteru

2018-06-01

We prepared Bi- and Ga-substituted Tb3Fe5O12 (BiGa:TIG) films on a Nd-substituted Y3Al5O12 (Nd:YAG) single crystal substrate by pulsed laser deposition, and investigated their magnetic, optical, and magnetooptical properties. A BiGa:TIG film deposited with a substrate temperature of 700 °C shows the easy axis of magnetization along the out-of-plane direction of the film and the Faraday rotation angle of 900°/cm at a wavelength of 1064 nm. The epitaxial growth of the film is confirmed by X-ray diffraction analysis.

Getting an Empirical Hold of the "Sustainable University": A Comparative Analysis of Evaluation Frameworks across 12 Contemporary Sustainability Assessment Tools

ERIC Educational Resources Information Center

Fischer, Daniel; Jenssen, Silke; Tappeser, Valentin

2015-01-01

Although it is increasingly recognised that higher education institutions have to play a critical role in the progression towards a sustainable development, the question of what fields and issues universities should attend to in their attempt to become more sustainable remains subject to debate. In recent years, sustainability assessment tools…

Designing, testing, and implementing a sustainable nurse home visiting program: right@home.

PubMed

Goldfeld, Sharon; Price, Anna; Kemp, Lynn

2018-05-01

Nurse home visiting (NHV) offers a potential platform to both address the factors that limit access to services for families experiencing adversity and provide effective interventions. Currently, the ability to examine program implementation is hampered by a lack of detailed description of actual, rather than expected, program development and delivery in published studies. Home visiting implementation remains a black box in relation to quality and sustainability. However, previous literature would suggest that efforts to both report and improve program implementation are vital for NHV to have population impact and policy sustainability. In this paper, we provide a case study of the design, testing, and implementation of the right@home program, an Australian NHV program and randomized controlled trial. We address existing gaps related to implementation of NHV programs by describing the processes used to develop the program to be trialed, summarizing its effectiveness, and detailing the quality processes and implementation evaluation. The weight of our evidence suggests that NHV can be a powerful and sustainable platform for addressing inequitable outcomes, particularly when the program focuses on parent engagement and partnership, delivers evidence-based strategies shown to improve outcomes, includes fidelity monitoring, and is adapted to and embedded within existing service delivery systems. © 2018 The Authors. Annals of the New York Academy of Sciences published by Wiley Periodicals, Inc. on behalf of The New York Academy of Sciences.

Role of Ga particulates on the structure and optical properties of Y3(Al,Ga)5O12:Tb thin films prepared by PLD

NASA Astrophysics Data System (ADS)

Yousif, A.; Duvenhage, M. M.; Ntwaeaborwa, O. M.; Swart, H. C.

2018-04-01

Y3(Al,Ga)5O12:Tb thin films (70 nm) have been prepared by pulsed laser deposition on a Si (100) substrate at the substrate temperature of 300 °C. The effect of annealing time on the structural, morphological and luminescence properties of Y3(Al,Ga)5O12:Tb thin films at 800 °C were studied. The crystal structure of the samples was studied by X- ray diffraction (XRD) and showed shifts in the peak positions to lower diffraction angles for the annealed film compared to the XRD peak positions of the commercial Y3(Al,Ga)5O12:Tb powder. A new excitation band different from the original Y3(Al,Ga)5O12:Tb powder was also observed for the annealed films. The shift in the XRD pattern and the new excitation band for the annealed film suggested that the films were enriched with Ga after annealing.

P2Y5 is a Gαi, Gα12/13 G protein-coupled receptor activated by lysophosphatidic acid that reduces intestinal cell adhesion

PubMed Central

Lee, Mike; Choi, Sungwon; Halldén, Gunnel; Yo, Sek Jin; Schichnes, Denise

2009-01-01

P2Y5 is a G protein-coupled receptor that binds and is activated by lysophosphatidic acid (LPA). We determined that P2Y5 transcript is expressed along the intestinal mucosa and investigated the intracellular pathways induced by P2Y5 activation, which could contribute to LPA effects on intestinal cell adhesion. P2Y5 heterologously expressed in CHO and small intestinal hBRIE 380i cells was activated by LPA resulting in an increase in intracellular calcium ([Ca2+]i) when the cells concurrently expressed GαΔ6qi5myr. P2Y5 activation also increased the phosphorylation of ERK1/2 that was sensitive to pertussis toxin. Together these indicate that P2Y5 activation by LPA induces an increase in [Ca2+]i and ERK1/2 phosphorylation through Gαi. We discovered that P2Y5 was activated by farnesyl pyrophosphate (FPP) without a detectable change in [Ca2+]i. The activation of P2Y5 by LPA or FPP induced the activity of a serum response element (SRE)-linked luciferase reporter that was inhibited by the RGS domain of p115RhoGEF, C3 exotoxin, and Y-27632, suggesting the involvement of Gα12/13, Rho GTPase, and ROCK, respectively. However, only LPA-mediated induction of SRE reporter activity was sensitive to inhibitors targeting p38 MAPK, PI3K, PLC, and PKC. In addition, only LPA transactivated the epidermal growth factor receptor, leading to an induction of ERK1/2 phosphorylation. These observations correlate with our subsequent finding that P2Y5 activation by LPA, and not FPP, reduced intestinal cell adhesion. This study elucidates a mechanism whereby LPA can act as a luminal and/or serosal cue to alter mucosal integrity. PMID:19679818

Hydrothermal-precipitation preparation of CdS@(Er3+:Y3Al5O12/ZrO2) coated composite and sonocatalytic degradation of caffeine.

PubMed

Huang, Yingying; Wang, Guowei; Zhang, Hongbo; Li, Guanshu; Fang, Dawei; Wang, Jun; Song, Youtao

2017-07-01

Here, we reported a novel method to dispose caffeine by means of ultrasound irradiation combinated with CdS@(Er 3+ :Y 3 Al 5 O 12 /ZrO 2 ) coated composite as sonocatalyst. The CdS@(Er 3+ :Y 3 Al 5 O 12 /ZrO 2 ) was synthesized via hydrothermal-precipitation method and then characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX) and UV-vis diffuse reflectance spectra (DRS). After that, the sonocatalytic degradation of caffeine in aqueous solution was conducted adopting CdS@(Er 3+ :Y 3 Al 5 O 12 /ZrO 2 ) and CdS@ZrO 2 coated composites as sonocatalysts. In addition, some influencing factors such as CdS and ZrO 2 molar proportion, caffeine concentration, ultrasonic irradiation time, sonocatalyst dosage and addition of several inorganic oxidants on sonocatalytic degradation of caffeine were investigated by using UV-vis spectra and gas chromatograph. The experimental results showed that the presence of Er 3+ :Y 3 Al 5 O 12 could effectively improve the sonocatalytic degradation activity of CdS@ZrO 2 . To a certain extent some inorganic oxidants can also enhance sonocatalytic degradation of caffeine in the presence of CdS@(Er 3+ :Y 3 Al 5 O 12 /ZrO 2 ). The best sonocatalytic degradation ratio (94.00%) of caffeine could be obtained when the conditions of 5.00mg/L caffeine, 1.00g/L prepared CdS@(Er 3+ :Y 3 Al 5 O 12 /ZrO 2 ), 10.00mmol/LK 2 S 2 O 8 , 180min ultrasonic irradiation (40kHz frequency and 50W output power), 100mL total volume and 25-28°C temperature were adopted. It seems that the method of sonocatalytic degradation caused by CdS@(Er 3+ :Y 3 Al 5 O 12 /ZrO 2 ) displayspotentialadvantages in disposing caffeine. Copyright © 2017 Elsevier B.V. All rights reserved.

Steps for Washroom and Locker Room Sustainability.

ERIC Educational Resources Information Center

Wiens, Janet

2003-01-01

Administrators and design teams can use proven approaches to create sustainable washrooms and locker rooms. Presents design strategies related to lighting, flooring, and water conservation that contribute to sustainability, then describes one college's experiences developing sustainable architecture, explaining how the building takes full…

Moving beyond GK–12

PubMed Central

Ufnar, J. A.; Kuner, Susan; Shepherd, V. L.

2012-01-01

The National Science Foundation GK–12 program has made more than 300 awards to universities, supported thousands of graduate student trainees, and impacted thousands of K–12 students and teachers. The goals of the current study were to determine the number of sustained GK–12 programs that follow the original GK–12 structure of placing graduate students into classrooms and to propose models for universities with current funding or universities interested in starting a program. Results from surveys, literature reviews, and Internet searches of programs funded between 1999 and 2008 indicated that 19 of 188 funded sites had sustained in-classroom programs. Three distinct models emerged from an analysis of these programs: a full-stipend model, in which graduate fellows worked with partner teachers in a K–12 classroom for 2 d/wk; a supplemental stipend model in which fellows worked with teachers for 1 d/wk; and a service-learning model, in which in-classroom activity was integrated into university academic coursework. Based on these results, potential models for sustainability and replication are suggested, including establishment of formal collaborations between sustained GK–12 programs and universities interested in starting in-classroom programs; development of a new Teaching Experience for Fellows program; and integration of supplemental fellow stipends into grant broader-impact sections. PMID:22949421

The sustained effect (12 months) of a single-dose vectored thermal pulsation procedure for meibomian gland dysfunction and evaporative dry eye

PubMed Central

Blackie, Caroline A; Coleman, Christy A; Holland, Edward J

2016-01-01

Purpose To evaluate the sustained effect (up to 1 year) of a single, 12-minute vectored thermal pulsation (VTP) treatment in improving meibomian gland function and dry eye symptoms in patients with meibomian gland dysfunction and evaporative dry eye. Methods The prospective, multicenter, open-label clinical trial included 200 subjects (400 eyes) who were randomized to a single VTP treatment (treatment group) or twice-daily, 3-month, conventional warm compress and eyelid hygiene therapy (control group). Control group subjects received crossover VTP treatment at 3 months (crossover group). Effectiveness measures of meibomian gland secretion (MGS) and dry eye symptoms were evaluated at baseline and 1, 3, 6, 9, and 12 months. Subjects with inadequate symptom relief could receive additional meibomian gland dysfunction therapy after 3 (treatment group) and 6 months (crossover group). Results At 3 months, the treatment group had greater mean improvement in MGS (P<0.0001) and dry eye symptoms (P=0.0068), compared to controls. At 12 months, 86% of the treatment group had received only one VTP treatment, and sustained a mean improvement in MGS from 6.4±3.7 (baseline) to 17.3±9.1 (P<0.0001) and dry eye symptoms from 44.1±20.4 to 21.6±21.3 (P<0.0001); 89% of the crossover group had received only one VTP treatment with sustained mean improvement in MGS from 6.3±3.6 to 18.4±11.1 (P<0.0001) and dry eye symptoms from 49.1±21.0 to 24.0±23.2 (P<0.0001). Greater mean improvement in MGS was associated with less severe baseline MGS (P=0.0017) and shorter duration of time between diagnosis and treatment (P=0.0378). Conclusion A single VTP treatment can deliver a sustained mean improvement in meibomian gland function and mean reduction in dry eye symptoms, over 12 months. A single VTP treatment provides significantly greater mean improvement in meibomian gland function and dry eye symptoms as compared to a conventional, twice-daily, 3-month regimen. Early VTP intervention for

The sustained effect (12 months) of a single-dose vectored thermal pulsation procedure for meibomian gland dysfunction and evaporative dry eye.

PubMed

Blackie, Caroline A; Coleman, Christy A; Holland, Edward J

2016-01-01

To evaluate the sustained effect (up to 1 year) of a single, 12-minute vectored thermal pulsation (VTP) treatment in improving meibomian gland function and dry eye symptoms in patients with meibomian gland dysfunction and evaporative dry eye. The prospective, multicenter, open-label clinical trial included 200 subjects (400 eyes) who were randomized to a single VTP treatment (treatment group) or twice-daily, 3-month, conventional warm compress and eyelid hygiene therapy (control group). Control group subjects received crossover VTP treatment at 3 months (crossover group). Effectiveness measures of meibomian gland secretion (MGS) and dry eye symptoms were evaluated at baseline and 1, 3, 6, 9, and 12 months. Subjects with inadequate symptom relief could receive additional meibomian gland dysfunction therapy after 3 (treatment group) and 6 months (crossover group). At 3 months, the treatment group had greater mean improvement in MGS (P<0.0001) and dry eye symptoms (P=0.0068), compared to controls. At 12 months, 86% of the treatment group had received only one VTP treatment, and sustained a mean improvement in MGS from 6.4±3.7 (baseline) to 17.3±9.1 (P<0.0001) and dry eye symptoms from 44.1±20.4 to 21.6±21.3 (P<0.0001); 89% of the crossover group had received only one VTP treatment with sustained mean improvement in MGS from 6.3±3.6 to 18.4±11.1 (P<0.0001) and dry eye symptoms from 49.1±21.0 to 24.0±23.2 (P<0.0001). Greater mean improvement in MGS was associated with less severe baseline MGS (P=0.0017) and shorter duration of time between diagnosis and treatment (P=0.0378). A single VTP treatment can deliver a sustained mean improvement in meibomian gland function and mean reduction in dry eye symptoms, over 12 months. A single VTP treatment provides significantly greater mean improvement in meibomian gland function and dry eye symptoms as compared to a conventional, twice-daily, 3-month regimen. Early VTP intervention for meibomian gland dysfunction is

Using an Outdoor Learning Space to Teach Sustainability and Material Processes in HE Product Design

ERIC Educational Resources Information Center

Firth, Richard; Stoltenberg, Einar; Jennings, Trent

2016-01-01

This "case study" of two jewellery workshops, used outdoor learning spaces to explore both its impact on learning outcomes and to introduce some key principles of sustainable working methodologies and practices. Using the beach as the classroom, academics and students from a Norwegian and Scottish (HE) product design exchange programme…

On the response of Y 3Al 5O 12: Ce (YAG: Ce) powder scintillating screens to medical imaging X-rays

NASA Astrophysics Data System (ADS)

Kandarakis, I.; Cavouras, D.; Sianoudis, I.; Nikolopoulos, D.; Episkopakis, A.; Linardatos, D.; Margetis, D.; Nirgianaki, E.; Roussou, M.; Melissaropoulos, P.; Kalivas, N.; Kalatzis, I.; Kourkoutas, K.; Dimitropoulos, N.; Louizi, A.; Nomicos, C.; Panayiotakis, G.

2005-02-01

The aim of this study was to examine Y 3Al 5O 12:Ce (also known as YAG:Ce) powder scintillator under X-ray imaging conditions. This material shows a very fast scintillation decay time and it has never been used in X-ray medical imaging. In the present study various scintillator layers (screens) with coating thickness ranging from 13 to 166 mg/cm 2 were prepared in our laboratory by sedimentation of Y 3Al 5O 12: Ce powder. Optical emission spectra and light emission efficiency (spectrum area over X-ray exposure) of the layers were measured under X-ray excitation using X-ray tube voltages (80-120 kVp) often employed in general medical radiography and fluoroscopy. Spectral compatibility with various optical photon detectors (photodiodes, photocathodes, charge coupled devices, films) and intrinsic conversion efficiency values were determined using emission spectrum data. In addition, parameters related to X-ray detection, energy absorption efficiency and K-fluorescence characteristic emission were calculated. A theoretical model describing radiation and light transfer through scattering media was used to fit experimental data. Intrinsic conversion efficiency (η≈0.03-0.05) and light attenuation coefficients (σ≈26.5 cm/g) were derived through this fitting. Y 3Al 5O 12:Ce showed peak emission in the wavelength range 530-550 nm. The light emission efficiency was found to be maximum for the 107 mg/cm 2 layer. Due to its "green" emission spectrum, Y 3Al 5O 12:Ce showed excellent compatibility (of the order of 0.9) with the sensitivity of many currently used photodetectors. Taking into account its very fast response Y 3Al 5O 12:Ce could be considered for application in X-ray imaging especially in various digital detectors.

Association between platelet P2Y12 haplotype and risk of cardiovascular events in chronic coronary disease.

PubMed

Schettert, Isolmar T; Pereira, Alexandre C; Lopes, Neuza H; Hueb, Whady A; Krieger, Jose E

2006-01-01

A positive association was recently described between P2Y12 platelet receptor H1 and H2 haplotypes and peripheral artery disease. We tested the described P2Y12 receptor haplotypes in a group of patients with coronary artery disease. The P2Y12 platelet receptor H1 and H2 haplotypes was tested in a group of 540 patients enrolled in the Medical, Angioplasty, or Surgery Study II (MASS II), a randomized trial comparing treatments for patients with coronary artery disease (CAD) and preserved left ventricular function. After a 3-year follow-up period, the incidence of the composite end point of cardiac death, myocardial infarction, and refractory angina requiring revascularization was determined in the H1/H1, H1/H2 and H2/H2 haplotype groups. We used Student's t-test and the chi-square test to analyze the differences among groups and Kaplan-Meier method to calculate survival curves. Risk was assessed with the use of a Cox proportional-hazards model. The frequency of haplotypes among studied patients were 410 (75.9%) H1/H1, 119 (22.0%) H1/H2 and 11 (2.1%) H2/H2. The baseline clinical characteristics, mean clinical follow-up time and received treatment of each genotype group were similar. We did not disclose any association between haplotype groups regarding the incidence of any of the studied cardiovascular end-points. This is the first report studying the association of P2Y12 platelet receptor H1 and H2 haplotype and cardiovascular events. Our findings do not provide evidence for a strong association between H1/H1 and H1/H2 haplotypes and a increased risk of cardiovascular events in a population with CAD. Future works should address the role of the H2/H2 haplotype as a genetic marker for cardiovascular events.

Sustainable microbial water quality monitoring programme design using phage-lysis and multivariate techniques.

PubMed

Nnane, Daniel Ekane

2011-11-15

Contamination of surface waters is a pervasive threat to human health, hence, the need to better understand the sources and spatio-temporal variations of contaminants within river catchments. River catchment managers are required to sustainably monitor and manage the quality of surface waters. Catchment managers therefore need cost-effective low-cost long-term sustainable water quality monitoring and management designs to proactively protect public health and aquatic ecosystems. Multivariate and phage-lysis techniques were used to investigate spatio-temporal variations of water quality, main polluting chemophysical and microbial parameters, faecal micro-organisms sources, and to establish 'sentry' sampling sites in the Ouse River catchment, southeast England, UK. 350 river water samples were analysed for fourteen chemophysical and microbial water quality parameters in conjunction with the novel human-specific phages of Bacteroides GB-124 (Bacteroides GB-124). Annual, autumn, spring, summer, and winter principal components (PCs) explained approximately 54%, 75%, 62%, 48%, and 60%, respectively, of the total variance present in the datasets. Significant loadings of Escherichia coli, intestinal enterococci, turbidity, and human-specific Bacteroides GB-124 were observed in all datasets. Cluster analysis successfully grouped sampling sites into five clusters. Importantly, multivariate and phage-lysis techniques were useful in determining the sources and spatial extent of water contamination in the catchment. Though human faecal contamination was significant during dry periods, the main source of contamination was non-human. Bacteroides GB-124 could potentially be used for catchment routine microbial water quality monitoring. For a cost-effective low-cost long-term sustainable water quality monitoring design, E. coli or intestinal enterococci, turbidity, and Bacteroides GB-124 should be monitored all-year round in this river catchment. Copyright © 2011 Elsevier B.V. All

Synthesis and preliminary evaluation of [3H]PSB-0413, a selective antagonist radioligand for platelet P2Y12 receptors.

PubMed

El-Tayeb, Ali; Griessmeier, Kerstin J; Müller, Christa E

2005-12-15

The selective antagonist radioligand [(3)H]2-propylthioadenosine-5'-adenylic acid (1,1-dichloro-1-phosphonomethyl-1-phosphonyl) anhydride ([(3)H]PSB-0413) was prepared by catalytic hydrogenation of its propargyl precursor with a high specific radioactivity of 74Ci/mmol. In preliminary saturation binding studies, [(3)H]PSB-0413 showed high affinity for platelet P2Y(12) receptors with a K(D) value of 4.57nM. Human platelets had a high density of P2Y(12) receptors exhibiting a B(max) value of 7.66pmol/mg of protein.

Non-radiative recombination in Ge{sub 1−y}Sn{sub y} light emitting diodes: The role of strain relaxation in tuned heterostructure designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gallagher, J. D.; Xu, C.; Smith, D. J.

This paper describes the properties of Ge{sub 1−y}Sn{sub y} light emitting diodes with a broad range of Sn concentrations (y = 0.0–0.11). The devices are grown upon Si(100) platforms using ultra-low temperature deposition of highly reactive Ge and Sn hydrides. The device fabrication adopts two new photodiode designs which lead to optimized performance and enables a systematic study of the effects of strain relaxation on emission efficiency. In contrast with n-Ge/i-Ge{sub 1−y}Sn{sub y}/p-Ge analogs, which in most cases contain two defected interfaces, our designs include a p-layer with composition Ge{sub 1−z}Sn{sub z} chosen to be z < y to facilitate light extraction, but withmore » z close enough to y to guarantee no strain relaxation at the i/p interface. In addition, a Ge{sub 1−x}Sn{sub x} alloy is also used for the n layer, with compositions in the 0 ≤ x ≤ y range, so that defected and non-defected n/i interfaces can be studied. The electroluminescence spectra vs the Sn content y in the intrinsic layer of the diodes exhibit a monotonic shift in the emission wavelength from 1550 nm to 2500 nm. On the other hand, the emission intensities show a complex dependence that cannot be explained solely on the basis of Sn concentrations. Detailed theoretical modeling of these intensities makes it possible to extract recombination lifetimes that are found to be more than three times longer in samples in which strain relaxation has not occurred at the n-i interface, demonstrating the existence of a large non-radiative contribution from the relaxation defects. This finding is particularly significant for direct gap diodes with y > 0.09, for which it is practically impossible to avoid strain relaxation in n-Ge/i-Ge{sub 1−y}Sn{sub y}/p-Ge analogs. The new designs introduced here open the door to the fabrication of highly efficient electrically pumped systems for applications in future generations of integrated photonics.« less

Thermal Performance of Precast Concrete Sandwich Panel (PCSP) Design for Sustainable Built Environment

NASA Astrophysics Data System (ADS)

Ern, Peniel Ang Soon; Ling, Lim Mei; Kasim, Narimah; Hamid, Zuhairi Abd; Masrom, Md Asrul Nasid Bin

2017-10-01

Malaysia’s awareness of performance criteria in construction industry towards a sustainable built environment with the use of precast concrete sandwich panel (PCSP) system is applied in the building’s wall to study the structural behaviour. However, very limited studies are conducted on the thermal insulation of exterior and interior panels in PCSP design. In hot countries such as Malaysia, proper designs of panel are important to obtain better thermal insulation for building. This study is based on thermal performance of precast concrete sandwich panel design for sustainable built environment in Malaysia. In this research, three full specimens, which are control specimen (C), foamed concrete (FC) panels and concrete panels with added palm oil fuel ash (FC+ POFA), where FC and FC+POFA sandwiched with gypsum board (G) were produced to investigate their thermal performance. Temperature difference of exterior and interior surface of specimen was used as indicators of thermal-insulating performance of PCSP design. Heat transfer test by halogen lamp was carried out on three specimens where the exterior surface of specimens was exposed to the halogen lamp. The temperature reading of exterior and interior surface for three specimens were recorded with the help of thermocouple. Other factors also studied the workability, compressive strength and axial compressive strength of the specimens. This study has shown that FC + POFA specimen has the strength nearer to normal specimen (C + FC specimen). Meanwhile, the heat transfer results show that the FC+POFA has better thermal insulation performance compared to C and FC specimens with the highest temperature difference, 3.4°C compared to other specimens. The results from this research are useful to be implemented in construction due to its benefits such as reduction of energy consumption in air-conditioning, reduction of construction periods and eco-friendly materials.

Bamboo as sustainable material for furniture design in disaster and remote areas in Indonesia

NASA Astrophysics Data System (ADS)

Sofiana, Yunida; Wahidiyat, Mita; Caroline, Octaviana Sylvia

2018-03-01

Bamboo has been known as a sustainable material for architecture, but only used on a small scale for furniture. However, even though it a sustainable resource, many people considered Bamboo as outcast material for furniture because of its appearance. Evidently, the use of bamboo is often used to make simple tools with similar traditional designs for everyday life. The tradition of using bamboo was not further explored with respect to the ongoing development of creative design and function in the era of today’s modern technology. In retrospect to the above issues, this study is aimed to introduce the used of bamboo for material furniture in disaster and remote areas in Indonesia to increases their quality of life. It uses a research by a method of collecting data through surveys, literature review, interviews and training to determine the types of bamboo used for material furniture in disaster and remote territories. The results of this study is intended to show that the use of bamboo can be further developed into furniture for disaster and remote territory to create higher values of the products and increase the quality of life.

Study on microstructure and strengthening mechanism of AZ91-Y magnesium alloy

NASA Astrophysics Data System (ADS)

Cai, Huisheng; Guo, Feng; Su, Juan; Liu, Liang; Chen, Baodong

2018-03-01

AZ91-Y magnesium alloy with different thicknesses were prepared by die casting process. The main existence forms of Y in alloy and the effects of Y on microstructure and mechanical properties of alloy were studied, the main reason for the change of mechanical properties and fracture mechanism were analyzed. The results show that, yttrium exists mainly in the forms of Al2Y phase and trace solid solution in α-Mg. Yttrium can refine the grain of α-Mg, reduce the amount of eutectic β-Mg17Al12 phase and promote its discrete distribution. The room temperature tensile strength and elongation of alloy increased first and then decreased with the increase of Y content. The designed alloys containing 0.6% Y (measured containing 0.63% Y) have better mechanical properties. The change of mechanical properties of alloy is a comprehensive reflection of the effect of solid solution, grain refinement and second phase. The cracking of Al2Y phase and β-Mg17Al12 phase and crack propagation through Al2Y phase and β-Mg17Al12 phase are the main fracture mechanism of magnesium alloy containing yttrium. The cooling rate does not change the trend of the influence of Y, but affects the degree of influence of Y.

Filled Nd(z)Fe(x)Co(4-x)Sb(12-y)Ge(y) Skutterudites: Processing and Thermoelectric Properties

NASA Technical Reports Server (NTRS)

Mackey, Jon; Sehirlioglu, Alp; Dynys, Fred

2016-01-01

Skutterudites have proven to be a useful thermoelectric system as a result of their enhanced figure of merit (ZT1), cheap material cost, favorable mechanical properties, and good thermal stability. The majority of skutterudite interest in recent years has been focused on binary skutterudites like CoSb3. Binary skutterudites are often double and triple filled, with a range of elements from the lanthanide series, in order to reduce the lattice component of thermal conductivity. Ternary and quaternary skutterudites, such as Co4Ge6Se6 or Ni4Sb8Sn4, provide additional paths to tune the electronic structure. The thermal conductivity can further be improved in these complex skutterudites by the introduction of fillers. The Nd(z)Fe(x)Co(4-x)Sb(12-y)Ge(y) system has been investigated as a p-type thermoelectric material, and is stable up to 600 C. The influence of Fe and Ge content, along with filler Nd, was investigated on thermoelectric transport properties. In addition to the chemical influence on properties, some processing details of the system will also be addressed.

Advanced Energy Design Guide K-12: Next Generation of School Design and Operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Torcellini, Paul A; Pless, Shanti

Driven by energy efficiency advances and renewable energy cost reductions, zero energy buildings are popping up all around the country. Although zero energy represents a bold paradigm shift - from buildings that consume energy to buildings that produce enough energy to meet their energy needs on an annual basis - it isn't a sudden shift. Zero energy buildings are the result of steady, incremental progress by researchers and building professionals working together to improve building energy performance. ASHRAE is taking the lead by publishing - in partnership with the American Institute of Architects (AIA), the Illuminating Engineering Society (IES), themore » U.S. Green Building Council (USGBC), and the U.S. Department of Energy (DOE) - a new series of advanced energy design guides (AEDGs) focused on zero energy buildings. The recently completed Advanced Energy Design Guide for K-12 School Buildings: Achieving Zero Energy (K-12 ZE AEDG) is the first in this series.« less

Catalyst design for enhanced sustainability through fundamental surface chemistry.

PubMed

Personick, Michelle L; Montemore, Matthew M; Kaxiras, Efthimios; Madix, Robert J; Biener, Juergen; Friend, Cynthia M

2016-02-28

Decreasing energy consumption in the production of platform chemicals is necessary to improve the sustainability of the chemical industry, which is the largest consumer of delivered energy. The majority of industrial chemical transformations rely on catalysts, and therefore designing new materials that catalyse the production of important chemicals via more selective and energy-efficient processes is a promising pathway to reducing energy use by the chemical industry. Efficiently designing new catalysts benefits from an integrated approach involving fundamental experimental studies and theoretical modelling in addition to evaluation of materials under working catalytic conditions. In this review, we outline this approach in the context of a particular catalyst-nanoporous gold (npAu)-which is an unsupported, dilute AgAu alloy catalyst that is highly active for the selective oxidative transformation of alcohols. Fundamental surface science studies on Au single crystals and AgAu thin-film alloys in combination with theoretical modelling were used to identify the principles which define the reactivity of npAu and subsequently enabled prediction of new reactive pathways on this material. Specifically, weak van der Waals interactions are key to the selectivity of Au materials, including npAu. We also briefly describe other systems in which this integrated approach was applied. © 2016 The Author(s).

Catalyst design for enhanced sustainability through fundamental surface chemistry

DOE PAGES

Personick, Michelle L.; Montemore, Matthew M.; Kaxiras, Efthimios; ...

2016-01-11

Decreasing energy consumption in the production of platform chemicals is necessary to improve the sustainability of the chemical industry, which is the largest consumer of delivered energy. The majority of industrial chemical transformations rely on catalysts, and therefore designing new materials that catalyse the production of important chemicals via more selective and energy-efficient processes is a promising pathway to reducing energy use by the chemical industry. Efficiently designing new catalysts benefits from an integrated approach involving fundamental experimental studies and theoretical modelling in addition to evaluation of materials under working catalytic conditions. In this paper, we outline this approach inmore » the context of a particular catalyst—nanoporous gold (npAu)—which is an unsupported, dilute AgAu alloy catalyst that is highly active for the selective oxidative transformation of alcohols. Fundamental surface science studies on Au single crystals and AgAu thin-film alloys in combination with theoretical modelling were used to identify the principles which define the reactivity of npAu and subsequently enabled prediction of new reactive pathways on this material. Specifically, weak van der Waals interactions are key to the selectivity of Au materials, including npAu. Finally, we also briefly describe other systems in which this integrated approach was applied.« less

78 FR 13014 - Designation of West Lafayette (IN) To Provide Class X or Class Y Weighing Services

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... West Lafayette (IN) To Provide Class X or Class Y Weighing Services AGENCY: Grain Inspection, Packers... Titus Grain Inspection, Inc. (Titus) to provide Class X or Class Y weighing services under the United... currently assigned geographic area. Titus's present designation is amended to include Class X or Class Y...

Sustaining a Community Computing Infrastructure for Online Teacher Professional Development: A Case Study of Designing Tapped In

NASA Astrophysics Data System (ADS)

Farooq, Umer; Schank, Patricia; Harris, Alexandra; Fusco, Judith; Schlager, Mark

Community computing has recently grown to become a major research area in human-computer interaction. One of the objectives of community computing is to support computer-supported cooperative work among distributed collaborators working toward shared professional goals in online communities of practice. A core issue in designing and developing community computing infrastructures — the underlying sociotechnical layer that supports communitarian activities — is sustainability. Many community computing initiatives fail because the underlying infrastructure does not meet end user requirements; the community is unable to maintain a critical mass of users consistently over time; it generates insufficient social capital to support significant contributions by members of the community; or, as typically happens with funded initiatives, financial and human capital resource become unavailable to further maintain the infrastructure. On the basis of more than 9 years of design experience with Tapped In-an online community of practice for education professionals — we present a case study that discusses four design interventions that have sustained the Tapped In infrastructure and its community to date. These interventions represent broader design strategies for developing online environments for professional communities of practice.

Design of sustained release tablet containing fucoidan.

PubMed

Tran, Thao Truong-Dinh; Ngo, Dai Kieu-Phuong; Vo, Toi Van; Tran, Phuong Ha-Lien

2015-01-01

The study introduced a new therapeutic agent, fucoidan, which can offer potential medical treatments including anti-inflammatory and anti-coagulant activities, as well as anti-proliferative effects on cancer cells. Fucoidan was included in sustained release formulations expected for an effective plasma drug concentration for approximately 24 h. The matrices based on the two polymers hydroxypropyl methycellulose (HPMC) and polyethylene oxide (PEO) were prepared with various ratios between the polymers and fucoidan. The dissolution profiles of various matrix tablets performed in enzyme-free simulated intestinal fluid (pH 6.8) for 24 h indicated a higher potential of PEO-based matrix tablets in sustaining release of fucoidan. The swelling and erosion of the tablets were also characterized to elucidate the difference among those dissolution profiles.

Synthesis and Luminescence Characteristics of Cr 3+ doped Y 3Al 5O 12 Phosphors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Brenda A.; Dabestani, Reza T.; Lewis, Linda A.

2015-10-01

Luminescence performance of yttrium aluminum garnet (Y 3Al 5O 12) phosphors as a function of Cr 3+ concentration has been investigated via two different wet-chemical synthesis techniques, direct- (DP) and hydrothermal-precipitation (HP). Using either of these methods, the red-emitting phosphor [Y 3Al 5-xCr xO 12 (YAG: Cr 3+)] showed similar photoluminescence (PL) intensities once the dopant concentration was optimized. Specifically, the YAG: Cr 3+ PL emission intensity reached a maximum at Cr3+ concentrations of x = 0.02 (0.4 at.%) and x = 0.13 (2.6 at.%) for DP and HP processed samples, respectively. The results indicated the strong influence of themore » processing method on the optimized YAG: Cr 3+ performance, where a more effective energy transfer rate between a pair of Cr3+ activators at low concentration levels was observed by using the DP synthesis technique. Development of a highly efficient phosphor, using a facile synthesis approach, could significantly benefit consumer and industrial applications by improving the operational efficiency of a wide range of practical devices.« less

Sustainable Sizing.

PubMed

Robinette, Kathleen M; Veitch, Daisy

2016-08-01

To provide a review of sustainable sizing practices that reduce waste, increase sales, and simultaneously produce safer, better fitting, accommodating products. Sustainable sizing involves a set of methods good for both the environment (sustainable environment) and business (sustainable business). Sustainable sizing methods reduce (1) materials used, (2) the number of sizes or adjustments, and (3) the amount of product unsold or marked down for sale. This reduces waste and cost. The methods can also increase sales by fitting more people in the target market and produce happier, loyal customers with better fitting products. This is a mini-review of methods that result in more sustainable sizing practices. It also reviews and contrasts current statistical and modeling practices that lead to poor fit and sizing. Fit-mapping and the use of cases are two excellent methods suited for creating sustainable sizing, when real people (vs. virtual people) are used. These methods are described and reviewed. Evidence presented supports the view that virtual fitting with simulated people and products is not yet effective. Fit-mapping and cases with real people and actual products result in good design and products that are fit for person, fit for purpose, with good accommodation and comfortable, optimized sizing. While virtual models have been shown to be ineffective for predicting or representing fit, there is an opportunity to improve them by adding fit-mapping data to the models. This will require saving fit data, product data, anthropometry, and demographics in a standardized manner. For this success to extend to the wider design community, the development of a standardized method of data collection for fit-mapping with a globally shared fit-map database is needed. It will enable the world community to build knowledge of fit and accommodation and generate effective virtual fitting for the future. A standardized method of data collection that tests products' fit methodically

Designer Librarian: Embedded in K12 Online Learning

ERIC Educational Resources Information Center

Boyer, Brenda

2015-01-01

Over the past two decades, shifts in technology have altered the roles of school librarians in a multitude of ways. New rigorous standards, proliferation of devices, and steady growth of online and blended learning for the K12 market now demand librarians engage with learners in online environments. Taking an instructional design approach is the…

Optical and scintillation properties of ce-doped (Gd2Y1)Ga2.7Al2.3O12 single crystal grown by Czochralski method

NASA Astrophysics Data System (ADS)

Wang, Chao; Wu, Yuntao; Ding, Dongzhou; Li, Huanying; Chen, Xiaofeng; Shi, Jian; Ren, Guohao

2016-06-01

Multicomponent garnets, due to their excellent light yield and energy resolution, become one of the most promising scintillators used for homeland security and nuclear non-proliferation applications. This work focuses on the optimization of Ce-doped (Gd,Y)3(Ga,Al)5O12 scintillators using a combination strategy of pre-screening and scale-up. Ce-doped GdxY1-xGayAl5-yO12 (x=1, 2 and y=2, 2.2, 2.5, 2.7, 3) polycrystalline powders were prepared by high-temperature solid state reaction method. The desired garnet phase in all the samples was confirmed using X-ray diffraction measurement. By comparing the radioluminescence intensity, the highest scintillation efficiency was achieved at a component of Gd2Y1Ga2.7Al2.3O12:Ce powders. A (Gd2Y1)Ga2.7Al2.3O12 doped with 1% Ce single crystal with dimensions of Ø35×40 mm was grown by Czochralski method using a <111> oriented seed. Luminescence and scintillation properties were measured. An optical transmittance of 84% was achieved in the concerned wavelength from 500 to 800 nm. Its 5d-4f emission of Ce3+ is at 530 nm. The light yield of a Ce1%: Gd2Y1Ga2.7Al2.3O12 single crystal slab at a size of 5×5×1 mm3 can reach about 65,000±3000 Ph/MeV along with two decay components of 94 and 615 ns under 137Cs source irradiation.

Critical materials: a reason for sustainable education of industrial designers and engineers

NASA Astrophysics Data System (ADS)

Köhler, Andreas R.; Bakker, Conny; Peck, David

2013-08-01

Developed economies have become highly dependent on a range of technology metals with names such as neodymium and terbium. Stakeholders have warned of the impending scarcity of these critical materials. Difficulties in materials supply can affect the high-tech industries as well as the success of sustainable innovation strategies that are based on sophisticated technology. Industrial designers and engineers should therefore increase their awareness of the limits in availability of critical materials. In this paper, it is argued that materials' criticality can give a fresh impetus to the higher education of industrial design engineers. It is important to train future professionals to apply a systems perspective to the process of technology innovation, enabling them to thrive under circumstances of constrained material choices. The conclusions outline ideas on how to weave the topic into existing educational programmes of future technology developers.

Finding harmony so the music plays on: pragmatic trial design considerations to promote organizational sustainment of an empirically-supported behavior therapy.

PubMed

Hartzler, Bryan; Peavy, K Michelle; Jackson, T Ron; Carney, Molly

2016-01-22

Pragmatic trials of empirically-supported behavior therapies may inform clinical and policy decisions concerning therapy sustainment. This retrospective trial design paper describes and discusses pragmatic features of a hybrid type III implementation/effectiveness trial of a contingency management (CM) intervention at an opioid treatment program. Prior reporting (Hartzler et al., J Subst Abuse Treat 46:429-438, 2014; Hartzler, Subst Abuse Treat Prev Policy 10:30, 2015) notes success in recruiting program staff for voluntary participation, durable impacts of CM training on staff-level outcomes, provisional setting implementation of the intervention, documentation of clinical effectiveness, and post-trial sustainment of CM. Six pragmatic design features, and both scientific and practical bases for their inclusion in the trial, are presented: (1) a collaborative intervention design process, (2) voluntary recruitment of program staff for therapy training and implementation, (3) serial training outcome assessments, with quasi-experimental staff randomization to either single or multiple baseline assessment conditions, (4) designation of a 90-day period immediately after training in which the setting implemented the intervention on a provisional basis, (5) inclusive patient eligibility for receipt of the CM intervention, and (6) designation of two staff as local implementation leaders to oversee clinical/administrative issues in provisional implementation. Each pragmatic trial design feature is argued to have contributed to sustainment of CM. Contributions implicate the building of setting proprietorship for the CM intervention, culling of internal staff expertise in its delivery, iterative use of assessment methods that limited setting burden, documentation of setting-specific clinical effectiveness, expanded penetration of CM among staff during provisional implementation, and promotion of setting self-reliance in the oversight of sustainable implementation procedures

Design, Development and Optimization of S (-) Atenolol Floating Sustained Release Matrix Tablets Using Surface Response Methodology

PubMed Central

Gunjal, P. T.; Shinde, M. B.; Gharge, V. S.; Pimple, S. V.; Gurjar, M. K.; Shah, M. N.

2015-01-01

The objective of this present investigation was to develop and formulate floating sustained release matrix tablets of s (-) atenolol, by using different polymer combinations and filler, to optimize by using surface response methodology for different drug release variables and to evaluate the drug release pattern of the optimized product. Floating sustained release matrix tablets of various combinations were prepared with cellulose-based polymers: Hydroxypropyl methylcellulose, sodium bicarbonate as a gas generating agent, polyvinyl pyrrolidone as a binder and lactose monohydrate as filler. The 32 full factorial design was employed to investigate the effect of formulation variables on different properties of tablets applicable to floating lag time, buoyancy time, % drug release in 1 and 6 h (D1 h,D6 h) and time required to 90% drug release (t90%). Significance of result was analyzed using analysis of non variance and P < 0.05 was considered statistically significant. S (-) atenolol floating sustained release matrix tablets followed the Higuchi drug release kinetics that indicates the release of drug follows anomalous (non-Fickian) diffusion mechanism. The developed floating sustained release matrix tablet of improved efficacy can perform therapeutically better than a conventional tablet. PMID:26798171

Design, Development and Optimization of S (-) Atenolol Floating Sustained Release Matrix Tablets Using Surface Response Methodology.

PubMed

Gunjal, P T; Shinde, M B; Gharge, V S; Pimple, S V; Gurjar, M K; Shah, M N

2015-01-01

The objective of this present investigation was to develop and formulate floating sustained release matrix tablets of s (-) atenolol, by using different polymer combinations and filler, to optimize by using surface response methodology for different drug release variables and to evaluate the drug release pattern of the optimized product. Floating sustained release matrix tablets of various combinations were prepared with cellulose-based polymers: Hydroxypropyl methylcellulose, sodium bicarbonate as a gas generating agent, polyvinyl pyrrolidone as a binder and lactose monohydrate as filler. The 3(2) full factorial design was employed to investigate the effect of formulation variables on different properties of tablets applicable to floating lag time, buoyancy time, % drug release in 1 and 6 h (D1 h,D6 h) and time required to 90% drug release (t90%). Significance of result was analyzed using analysis of non variance and P < 0.05 was considered statistically significant. S (-) atenolol floating sustained release matrix tablets followed the Higuchi drug release kinetics that indicates the release of drug follows anomalous (non-Fickian) diffusion mechanism. The developed floating sustained release matrix tablet of improved efficacy can perform therapeutically better than a conventional tablet.

Platelet P2Y12 receptors are involved in the haemostatic effect of notoginsenoside Ft1, a saponin isolated from Panax notoginseng

PubMed Central

Gao, B; Huang, L; Liu, H; Wu, H; Zhang, E; Yang, L; Wu, X; Wang, Z

2014-01-01

BACKGROUND AND PURPOSE Saponins isolated from Panax notoginseng (Burk.) F.H. Chen have been shown to relieve thrombogenesis and facilitate haemostasis. However, it is not known which saponin accounts for this haemostatic effect. Hence, in the present study we aimed to identify which saponins contribute to its haemostatic activity and to elucidate the possible underlying mechanisms. EXPERIMENTAL APPROACH Platelet aggregation was analysed using a platelet aggregometer. Prothrombin time, activated partial thromboplastin time and thrombin time were measured using a blood coagulation analyser, which was further corroborated with bleeding time and thrombotic assays. The interaction of notoginsenoside Ft1 with the platelet P2Y12 receptor was determined by molecular docking analysis, cytosolic Ca2+ and cAMP measurements, and phosphorylation of PI3K and Akt assays. KEY RESULTS Among the saponins examined, Ft1 was the most potent procoagulant and induced dose-dependent platelet aggregation. Ft1 reduced plasma coagulation indexes, decreased tail bleeding time and increased thrombogenesis. Moreover, it potentiated ADP-induced platelet aggregation and increased cytosolic Ca2+ accumulation, effects that were attenuated by clopidogrel. Molecular docking analysis suggested that Ft1 binds to platelet P2Y12 receptors. The increase in intracellular Ca2+ evoked by Ft1 in HEK293 cells overexpressing P2Y12 receptors could be blocked by ticagrelor. Ft1 also affected the production of cAMP and increased phosphorylation of PI3K and Akt downstream of P2Y12 signalling pathways. CONCLUSION AND IMPLICATIONS Ft1 enhanced platelet aggregation by activating a signalling network mediated through P2Y12 receptors. These novel findings may contribute to the effective utilization of this compound in the therapy of haematological disorders. PMID:24117220

Correlation between Sustainability Education and Engineering Students' Attitudes towards Sustainability

ERIC Educational Resources Information Center

Tang, Kuok Ho Daniel

2018-01-01

Purpose: The purpose of this study is to investigate the impacts of a sustainable development course on the beliefs, attitudes and intentions of a cohort of engineering students in a university in Miri, Malaysia, towards sustainability. Design/methodology/approach: Questionnaire survey was conducted among the cohort of students encompassing the…

[Application of an artificial neural network in the design of sustained-release dosage forms].

PubMed

Wei, X H; Wu, J J; Liang, W Q

2001-09-01

To use the artificial neural network (ANN) in Matlab 5.1 tool-boxes to predict the formulations of sustained-release tablets. The solubilities of nine drugs and various ratios of HPMC: Dextrin for 63 tablet formulations were used as the ANN model input, and in vitro accumulation released at 6 sampling times were used as output. The ANN model was constructed by selecting the optimal number of iterations (25) and model structure in which there are one hidden layer and five hidden layer nodes. The optimized ANN model was used for prediction of formulation based on desired target in vitro dissolution-time profiles. ANN predicted profiles based on ANN predicted formulations were closely similar to the target profiles. The ANN could be used for predicting the dissolution profiles of sustained release dosage form and for the design of optimal formulation.

ENVIRONMENTALLY BENIGN PROCESS RESEARCH: LINKING USEPA CHEMICAL PROCESS DESIGN AND SUSTAINABILITY

EPA Science Inventory