Strontium and barium iodide high light yield scintillators

NASA Astrophysics Data System (ADS)

Cherepy, Nerine J.; Hull, Giulia; Drobshoff, Alexander D.; Payne, Stephen A.; van Loef, Edgar; Wilson, Cody M.; Shah, Kanai S.; Roy, Utpal N.; Burger, Arnold; Boatner, Lynn A.; Choong, Woon-Seng; Moses, William W.

2008-02-01

Europium-doped strontium and barium iodide are found to be readily growable by the Bridgman method and to produce high scintillation light yields. SrI2(Eu ) emits into the Eu2+ band, centered at 435nm, with a decay time of 1.2μs and a light yield of ˜90000photons/MeV. It offers energy resolution better than 4% full width at half maximum at 662keV, and exhibits excellent light yield proportionality. BaI2(Eu ) produces >30000photons/MeV into the Eu2+ band at 420nm (<1μs decay). An additional broad impurity-mediated recombination band is present at 550nm (>3μs decay), unless high-purity feedstock is used.

Effect of Emamectin Benzoate on Root-Knot Nematodes and Tomato Yield

PubMed Central

Cheng, Xingkai; Liu, Xiumei; Wang, Hongyan; Ji, Xiaoxue; Wang, Kaiyun; Wei, Min; Qiao, Kang

2015-01-01

Southern root-knot nematode (Meloidogyne incognita) is an obligate, sedentary endoparasite of more than 3000 plant species, that causes heavy economic losses and limit the development of protected agriculture of China. As a biological pesticide, emamectin benzoate has effectively prevented lepidopteran pests; however, its efficacy to control M. incognita remains unknown. The purpose of the present study was to test soil application of emamectin benzoate for management of M. incognita in laboratory, greenhouse and field trials. Laboratory results showed that emamectin benzoate exhibited high toxicity to M. incognita, with LC50 and LC90 values 3.59 and 18.20 mg L-1, respectively. In greenhouse tests, emamectin benzoate soil application offered good efficacy against M. incognita while maintaining excellent plant growth. In field trials, emamectin benzoate provided control efficacy against M. incognita and resulted in increased tomato yields. Compared with the untreated control, there was a 36.5% to 81.3% yield increase obtained from all treatments and the highest yield was received from the highest rate of emamectin benzoate. The results confirmed that emamectin benzoate has enormous potential for the control of M. incognita in tomato production in China. PMID:26509680

Effect of Emamectin Benzoate on Root-Knot Nematodes and Tomato Yield.

PubMed

Cheng, Xingkai; Liu, Xiumei; Wang, Hongyan; Ji, Xiaoxue; Wang, Kaiyun; Wei, Min; Qiao, Kang

2015-01-01

Southern root-knot nematode (Meloidogyne incognita) is an obligate, sedentary endoparasite of more than 3000 plant species, that causes heavy economic losses and limit the development of protected agriculture of China. As a biological pesticide, emamectin benzoate has effectively prevented lepidopteran pests; however, its efficacy to control M. incognita remains unknown. The purpose of the present study was to test soil application of emamectin benzoate for management of M. incognita in laboratory, greenhouse and field trials. Laboratory results showed that emamectin benzoate exhibited high toxicity to M. incognita, with LC50 and LC90 values 3.59 and 18.20 mg L(-1), respectively. In greenhouse tests, emamectin benzoate soil application offered good efficacy against M. incognita while maintaining excellent plant growth. In field trials, emamectin benzoate provided control efficacy against M. incognita and resulted in increased tomato yields. Compared with the untreated control, there was a 36.5% to 81.3% yield increase obtained from all treatments and the highest yield was received from the highest rate of emamectin benzoate. The results confirmed that emamectin benzoate has enormous potential for the control of M. incognita in tomato production in China.

NASA Earth Science Research Results for Improved Regional Crop Yield Prediction

NASA Astrophysics Data System (ADS)

Mali, P.; O'Hara, C. G.; Shrestha, B.; Sinclair, T. R.; G de Goncalves, L. G.; Salado Navarro, L. R.

2007-12-01

National agencies such as USDA Foreign Agricultural Service (FAS), Production Estimation and Crop Assessment Division (PECAD) work specifically to analyze and generate timely crop yield estimates that help define national as well as global food policies. The USDA/FAS/PECAD utilizes a Decision Support System (DSS) called CADRE (Crop Condition and Data Retrieval Evaluation) mainly through an automated database management system that integrates various meteorological datasets, crop and soil models, and remote sensing data; providing significant contribution to the national and international crop production estimates. The "Sinclair" soybean growth model has been used inside CADRE DSS as one of the crop models. This project uses Sinclair model (a semi-mechanistic crop growth model) for its potential to be effectively used in a geo-processing environment with remote-sensing-based inputs. The main objective of this proposed work is to verify, validate and benchmark current and future NASA earth science research results for the benefit in the operational decision making process of the PECAD/CADRE DSS. For this purpose, the NASA South American Land Data Assimilation System (SALDAS) meteorological dataset is tested for its applicability as a surrogate meteorological input in the Sinclair model meteorological input requirements. Similarly, NASA sensor MODIS products is tested for its applicability in the improvement of the crop yield prediction through improving precision of planting date estimation, plant vigor and growth monitoring. The project also analyzes simulated Visible/Infrared Imager/Radiometer Suite (VIIRS, a future NASA sensor) vegetation product for its applicability in crop growth prediction to accelerate the process of transition of VIIRS research results for the operational use of USDA/FAS/PECAD DSS. The research results will help in providing improved decision making capacity to the USDA/FAS/PECAD DSS through improved vegetation growth monitoring from high

Recognition of Teaching Excellence*

PubMed Central

Piascik, Peggy; Medina, Melissa; Pittenger, Amy; Rose, Renee; Creekmore, Freddy; Soltis, Robert; Bouldin, Alicia; Schwarz, Lindsay; Scott, Steven

2010-01-01

The 2008-2009 Task Force for the Recognition of Teaching Excellence was charged by the AACP Council of Faculties Leadership to examine teaching excellence by collecting best practices from colleges and schools of pharmacy, evaluating the literature to identify evidence-based criteria for excellent teaching, and recommending appropriate means to acknowledge and reward teaching excellence. This report defines teaching excellence and discusses a variety of ways to assess it, including student, alumni, peer, and self-assessment. The task force identifies important considerations that colleges and schools must address when establishing teaching recognition programs including the purpose, criteria, number and mix of awards, frequency, type of award, and method of nominating and determining awardees. The report concludes with recommendations for the academy to consider when establishing and revising teaching award programs. PMID:21301598

NOBLE and EXCEL: The debate for excellence in dealing with left main stenosis.

PubMed

Kindi, Hamood Al; Samaan, Amir; Hosny, Hatem

2018-03-14

Left main coronary artery (LMCA) disease is associated with increased morbidity and mortality. Coronary artery bypass grafting surgery (CABG) has always been the standard revascularization strategy for this group of patients. However, with the recent developments in stents design and medical therapy over the past decade, several trials have been designed to evaluate the safety and efficacy of percutaneous coronary intervention (PCI) as an alternative to CABG surgery in patients with LMCA disease. Recently, the results of two major trials, EXCEL and NOBLE, comparing CABG versus PCI in this patient population have been released. In fact, the results of both trials might appear contradictory at first glance. While the EXCEL trial showed that PCI was non-inferior to CABG surgery, the NOBLE trial suggested that CABG surgery is a better option. In the following review, we will discuss some of the similarities and contrasts between these two trials and conclude with lessons to be learned to our daily practice.

NOBLE and EXCEL: The debate for excellence in dealing with left main stenosis

PubMed Central

Kindi, Hamood Al; Samaan, Amir

Left main coronary artery (LMCA) disease is associated with increased morbidity and mortality. Coronary artery bypass grafting surgery (CABG) has always been the standard revascularization strategy for this group of patients. However, with the recent developments in stents design and medical therapy over the past decade, several trials have been designed to evaluate the safety and efficacy of percutaneous coronary intervention (PCI) as an alternative to CABG surgery in patients with LMCA disease. Recently, the results of two major trials, EXCEL and NOBLE, comparing CABG versus PCI in this patient population have been released. In fact, the results of both trials might appear contradictory at first glance. While the EXCEL trial showed that PCI was non-inferior to CABG surgery, the NOBLE trial suggested that CABG surgery is a better option. In the following review, we will discuss some of the similarities and contrasts between these two trials and conclude with lessons to be learned to our daily practice. PMID:29644230

Growth, yield and compositional characteristics of Jerusalem artichoke as it relates to biomass production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stauffer, M.D.; Chubey, B.B.; Dorrell, D.G.

1980-01-01

Jerusalem artichoke (Helianthus tuberosus L.) has shown excellent potential as a carbohydrate-rich crop. Initial investigations determined inulin and tuber yields; however, when additional studies showed that good quality pulp remained after inulin extraction and high forage yields per hectare were obtainable, the scope of investigation was broadened to assess utilization of the total plant. Plant growth, yield and compositional characteristics of Jerusalem artichoke as they relate to biomass production will be reported.

Step edge sputtering yield at grazing incidence ion bombardment.

PubMed

Hansen, Henri; Polop, Celia; Michely, Thomas; Friedrich, Andreas; Urbassek, Herbert M

2004-06-18

The surface morphology of Pt(111) was investigated by scanning tunneling microscopy after 5 keV Ar+ ion bombardment at grazing incidence in dependence of the ion fluence and in the temperature range between 625 and 720 K. The average erosion rate was found to be strongly dependent on the ion fluence and the substrate temperature during bombardment. This dependence is traced back to the variation of step concentration with temperature and fluence. We develop a simple model allowing us to determine separately the constant sputtering yields for terraces and for impact area stripes in front of ascending steps. The experimentally determined yield of these stripes--the step-edge sputtering yield--is in excellent agreement with our molecular dynamics simulations performed for the experimental situation.

A versatile method for the determination of photochemical quantum yields via online UV-Vis spectroscopy.

PubMed

Stadler, Eduard; Eibel, Anna; Fast, David; Freißmuth, Hilde; Holly, Christian; Wiech, Mathias; Moszner, Norbert; Gescheidt, Georg

2018-05-16

We have developed a simple method for determining the quantum yields of photo-induced reactions. Our setup features a fibre coupled UV-Vis spectrometer, LED irradiation sources, and a calibrated spectrophotometer for precise measurements of the LED photon flux. The initial slope in time-resolved absorbance profiles provides the quantum yield. We show the feasibility of our methodology for the kinetic analysis of photochemical reactions and quantum yield determination. The typical chemical actinometers, ferrioxalate and ortho-nitrobenzaldehyde, as well as riboflavin, a spiro-compound, phosphorus- and germanium-based photoinitiators for radical polymerizations and the frequently utilized photo-switch azobenzene serve as paradigms. The excellent agreement of our results with published data demonstrates the high potential of the proposed method as a convenient alternative to the time-consuming chemical actinometry.

"What If" Analyses: Ways to Interpret Statistical Significance Test Results Using EXCEL or "R"

ERIC Educational Resources Information Center

Ozturk, Elif

2012-01-01

The present paper aims to review two motivations to conduct "what if" analyses using Excel and "R" to understand the statistical significance tests through the sample size context. "What if" analyses can be used to teach students what statistical significance tests really do and in applied research either prospectively to estimate what sample size…

ARS-Media for excel instruction manual

USDA-ARS?s Scientific Manuscript database

ARS-Media for Excel Instruction Manual is the instruction manual that explains how to use the Excel spreadsheet ARS-Media for Excel application. ARS-Media for Excel Instruction Manual is provided as a pdf file....

Quality-of-Life After Everolimus-Eluting Stents or Bypass Surgery for Left-Main Disease: Results From the EXCEL Trial.

PubMed

Baron, Suzanne J; Chinnakondepalli, Khaja; Magnuson, Elizabeth A; Kandzari, David E; Puskas, John D; Ben-Yehuda, Ori; van Es, Gerrit-Anne; Taggart, David P; Morice, Marie-Claude; Lembo, Nicholas J; Brown, W Morris; Banning, Adrian; Simonton, Charles A; Kappetein, A Pieter; Sabik, Joseph F; Serruys, Patrick W; Stone, Gregg W; Cohen, David J

2017-12-26

The EXCEL (Evaluation of Xience Versus Coronary Artery Bypass Surgery for Effectiveness of Left Main Revascularization) trial compared outcomes in patients with unprotected left main coronary artery disease (LMCAD) treated with coronary artery bypass graft (CABG) or percutaneous coronary intervention (PCI) using everolimus-eluting stents. Whereas rates of death, stroke, and myocardial infarction were similar at 36 months, event timing and repeat revascularization rates differed by treatment group. To understand the effects of revascularization strategy from the patient's perspective, a prospective quality of life (QoL) substudy was performed alongside the EXCEL trial. Between September 2010 and March 2014, 1,905 patients with LMCAD were randomized to undergo CABG or PCI, of whom 1,788 participated in the QoL substudy. QoL was assessed at baseline and 1, 12, and 36 months using the Seattle Angina Questionnaire, the 12-Item Short Form Health Survey, the Rose Dyspnea Scale, the Patient Health Questionnaire-8, and the EQ-5D. Differences between PCI and CABG were assessed using longitudinal random-effect growth curve models. Over 36 months, both PCI and CABG were associated with significant improvements in QoL compared with baseline. At 1 month, PCI was associated with better QoL than CABG. By 12 months though, these differences were largely attenuated, and by 36 months, there were no significant QoL differences between PCI and CABG. Among selected patients with LMCAD, both PCI and CABG result in similar QoL improvement through 36 months, although a greater early benefit is seen with PCI. Taken together with the 3-year clinical results of EXCEL, these findings suggest that PCI and CABG provide similar intermediate-term outcomes for patients with LMCAD. (Evaluation of Xience Versus Coronary Artery Bypass Surgery for Effectiveness of Left Main Revascularization [EXCEL]; NCT01205776). Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier

Excel for Cost Engineers

NASA Technical Reports Server (NTRS)

Butts, Glenn C.

2007-01-01

Excel is a powerful tool with a plethora of largely unused capabilities that can make the life of an engineer cognizant of them a great deal easier. This paper offers tips, tricks and techniques for better worksheets. Including the use of data validation, conditional formatting, subtotals, text formulas, custom functions and much more. It is assumed that the reader will have a cursory understanding of Excel so the basics will not be covered, if you get hung up try Excel's built in help menus, or a good book.

National Study of Excellence and Innovation in Physical Therapist Education: Part 1-Design, Method, and Results.

PubMed

Jensen, Gail M; Nordstrom, Terrence; Mostrom, Elizabeth; Hack, Laurita M; Gwyer, Janet

2017-09-01

The Carnegie Foundation for the Advancement of Teaching commissioned the Preparation for the Professions Program, a qualitative study of professional education in 5 professions: medicine, nursing, law, engineering, and clergy. These studies identified curricular structures, instructional practices, assessment approaches, and environmental characteristics that support the preparation of professionals and led to educational reforms. The physical therapy profession has not had any in-depth, national investigation of physical therapist education since the Catherine Worthingham studies conducted more than 50 years ago. This research was a Carnegie-type study, investigating elements of excellence and innovation in academic and clinical physical therapist education in the United States. Five physical therapist education researchers from across the United States used a qualitative multiple-case study design. Six academic and 5 clinical programs were selected for the study. The academic institutions and clinical agencies studied were diverse in size, institutional setting, geography, and role in residency education. Qualitative case studies were generated from review of artifacts, field observations, and interviews (individual and focus group), and they provided the data for the study. A conceptual framework grounded in 3 major dimensions was generated, with 8 supporting elements: (1) culture of excellence (shared beliefs and values, leadership and vision, drive for excellence, and partnerships), (2) praxis of learning (signature pedagogy, practice-based learning, creating adaptive learners, and professional formation), and (3) organizational structures and resources. Building on the work of the Carnegie Foundation's Preparation for the Professions Program, a conceptual model was developed, representing the dimensions and elements of excellence in physical therapist education that is centered on the foundational importance of a nexus of linked and highly valued aims of

Centers of excellence in healthcare institutions: what they are and how to assemble them.

PubMed

Elrod, James K; Fortenberry, John L

2017-07-11

Centers of excellence-specialized programs within healthcare institutions which supply exceptionally high concentrations of expertise and related resources centered on particular medical areas and delivered in a comprehensive, interdisciplinary fashion-afford many advantages for healthcare providers and the populations they serve. To achieve full value from centers of excellence, proper assembly is an absolute necessity, but guidance is somewhat limited. This effectively forces healthcare providers to pursue establishment largely via trial-and-error, diminishing opportunities for success. Successful development of a center of excellence first requires the acquisition of a detailed understanding of the delivery model and its benefits. Then, concerted actions must be taken on a particular series of administrative and clinical fronts, treating them in prescribed manners to afford synergies which yield an exceptionally high level of care. To reduce hardships associated with acquiring this rather elusive knowledge, remedy shortcomings in the literature, and potentially bolster community health broadly, this article presents information and insights gleaned from Willis-Knighton Health System's extensive experience assembling and operating centers of excellence. This work is intended to educate and enlighten, but most importantly, supply guidance which will permit healthcare establishments to replicate noted processes to realize their own centers of excellence. Centers of excellence have the ability to dramatically enhance the depth and breadth of healthcare services available in communities. Given the numerous mutual benefits afforded by this delivery model, it is hoped that the light shed by this article will help healthcare providers better understand centers of excellence and be more capable and confident in associated development initiatives, affording greater opportunities for themselves and their patient populations.

Excellence and Education: Rhetoric and Reality

ERIC Educational Resources Information Center

Gillies, Donald

2007-01-01

"Excellence" has been a prevalent term in New Labour rhetoric on education, most notably in the stated goal of "excellence for all" in education. Despite that, the meaning of the term has remained imprecise, and the implications of universal excellence unclear. In this paper, three distinct definitions of excellence are…

Teaching physics using Microsoft Excel

NASA Astrophysics Data System (ADS)

Uddin, Zaheer; Ahsanuddin, Muhammad; Khan, Danish Ahmed

2017-09-01

Excel is both ubiquitous and easily understandable. Most people from every walk of life know how to use MS office and Excel spreadsheets. Students are also familiar with spreadsheets. Most students know how to use spreadsheets for data analysis. Besides basic use of Excel, some important aspects of spreadsheets are highlighted in this article. MS Excel can be used to visualize effects of various parameters in a physical system. It can be used as a simulating tool; simulation of wind data has been done through spreadsheets in this study. Examples of Lissajous figures and a damped harmonic oscillator are presented in this article.

Limitations of Using Microsoft Excel Version 2016 (MS Excel 2016) for Statistical Analysis for Medical Research.

PubMed

Tanavalee, Chotetawan; Luksanapruksa, Panya; Singhatanadgige, Weerasak

2016-06-01

Microsoft Excel (MS Excel) is a commonly used program for data collection and statistical analysis in biomedical research. However, this program has many limitations, including fewer functions that can be used for analysis and a limited number of total cells compared with dedicated statistical programs. MS Excel cannot complete analyses with blank cells, and cells must be selected manually for analysis. In addition, it requires multiple steps of data transformation and formulas to plot survival analysis graphs, among others. The Megastat add-on program, which will be supported by MS Excel 2016 soon, would eliminate some limitations of using statistic formulas within MS Excel.

Brain dead or not? CT angiogram yielding false-negative result on brain death confirmation.

PubMed

Johnston, Robyn; Kaliaperumal, Chandrasekaran; Wyse, Gerald; Kaar, George

2013-01-08

We describe a case of severe traumatic brain injury with multiple facial and skull fractures where CT angiogram (CTA) failed to yield a definite result of brain death as an ancillary test. A 28-year-old man was admitted following a road traffic accident with a Glasgow Coma Score (GCS) of 3/15 and fixed pupils. CT brain revealed uncal herniation and diffuse cerebral oedema with associated multiple facial and skull fractures. 72 h later, his clinical condition remained the same with high intracranial pressure refractory to medical management. Clinical confirmation on brain death was not feasible owing to facial injuries. A CTA, performed to determine brain perfusion, yielded a 'false-negative' result. Skull fractures have possibly led to venous prominence in the cortical and deep venous drainage system. This point needs to be borne in mind while considering CTA as an ancillary test to confirm brain death.

Development of a Microsoft Excel tool for one-parameter Rasch model of continuous items: an application to a safety attitude survey.

PubMed

Chien, Tsair-Wei; Shao, Yang; Kuo, Shu-Chun

2017-01-10

Many continuous item responses (CIRs) are encountered in healthcare settings, but no one uses item response theory's (IRT) probabilistic modeling to present graphical presentations for interpreting CIR results. A computer module that is programmed to deal with CIRs is required. To present a computer module, validate it, and verify its usefulness in dealing with CIR data, and then to apply the model to real healthcare data in order to show how the CIR that can be applied to healthcare settings with an example regarding a safety attitude survey. Using Microsoft Excel VBA (Visual Basic for Applications), we designed a computer module that minimizes the residuals and calculates model's expected scores according to person responses across items. Rasch models based on a Wright map and on KIDMAP were demonstrated to interpret results of the safety attitude survey. The author-made CIR module yielded OUTFIT mean square (MNSQ) and person measures equivalent to those yielded by professional Rasch Winsteps software. The probabilistic modeling of the CIR module provides messages that are much more valuable to users and show the CIR advantage over classic test theory. Because of advances in computer technology, healthcare users who are familiar to MS Excel can easily apply the study CIR module to deal with continuous variables to benefit comparisons of data with a logistic distribution and model fit statistics.

Pharmaceutical Market Access: current state of affairs and key challenges - results of the Market Access Launch Excellence Inventory (MALEI).

PubMed

Koch, Marcus A

2015-01-01

To take inventory of the current state of affairs of Market Access Launch Excellence in the life sciences industry. To identify key gaps and challenges for Market Access (MA) and discuss how they can be addressed. To generate a baseline for benchmarking MA launch excellence. An online survey was conducted with pharmaceutical executives primarily working in MA, marketing, or general management. The survey aimed to evaluate MA excellence prerequisites across the product life cycle (rated by importance and level of implementation) and to describe MA activity models in the respective companies. Composite scores were calculated from respondents' ratings and answers. Implementation levels of MA excellence prerequisites generally lagged behind their perceived importance. Item importance and the respective level of implementation correlated well, which can be interpreted as proof of the validity of the questionnaire. The following areas were shown to be particularly underimplemented: 1) early integration of MA and health economic considerations in research and development decision making, 2) developing true partnerships with payers, including the development of services 'beyond the pill', and 3) consideration of human resource and talent management. The concept of importance-adjusted implementation levels as a hybrid parameter was introduced and shown to be a viable tool for benchmarking purposes. More than 70% of respondents indicated that their companies will invest broadly in MA in terms of capital and headcount within the next 3 years. MA (launch) excellence needs to be further developed in order to close implementation gaps across the entire product life cycle. As MA is a comparatively young pharmaceutical discipline in a complex and dynamic environment, this effort will require strategic focus and dedication. The Market Access Launch Excellence Inventory benchmarking tool may help guide decision makers to prioritize their endeavors.

Melding Excellence and Equity.

ERIC Educational Resources Information Center

Bennett, David A.

1983-01-01

This document examines the issues of educational excellence and equity. The Milwaukee Public School System, Wisconsin, is cited as an example of a desegregation program that both exceeded court requirements of equity and also made a substantial contribution to the goals of excellence in education. The school effectiveness movement, like…

Classic Russet: A Potato Cultivar with Excellent Fresh Market Characteristics and High Yields of U.S. No. 1 Tubers Suitable for Early Harvest or Full-Season Production.

USDA-ARS?s Scientific Manuscript database

Classic Russet is a medium maturing potato cultivar with rapid tuber bulking making it suitable for early harvest, as well as full-season production. Classic Russet is notable for its attractive tubers with medium russet skin and excellent culinary characteristics. It resulted from a 1995 cross bet...

"Excellence" in STEM Education

ERIC Educational Resources Information Center

Clark, Aaron C.

2012-01-01

So what does it take to achieve excellence in STEM education? That is the title of the author's presentation delivered at International Technology and Engineering Educators Association's (ITEEA's) FTEE "Spirit of Excellence" Breakfast on March 16, 2012, in Long Beach, California. In preparation for this presentation, the author went back and read…

Measurement of fission yields and isomeric yield ratios at IGISOL

NASA Astrophysics Data System (ADS)

Pomp, Stephan; Mattera, Andrea; Rakopoulos, Vasileios; Al-Adili, Ali; Lantz, Mattias; Solders, Andreas; Jansson, Kaj; Prokofiev, Alexander V.; Eronen, Tommi; Gorelov, Dimitri; Jokinen, Ari; Kankainen, Anu; Moore, Iain D.; Penttilä, Heikki; Rinta-Antila, Sami

2018-03-01

Data on fission yields and isomeric yield ratios (IYR) are tools to study the fission process, in particular the generation of angular momentum. We use the IGISOL facility with the Penning trap JYFLTRAP in Jyväskylä, Finland, for such measurements on 232Th and natU targets. Previously published fission yield data from IGISOL concern the 232Th(p,f) and 238U(p,f) reactions at 25 and 50 MeV. Recently, a neutron source, using the Be(p,n) reaction, has been developed, installed and tested. We summarize the results for (p,f) focusing on the first measurement of IYR by direct ion counting. We also present first results for IYR and relative yields for Sn and Sb isotopes in the 128-133 mass range from natU(n,f) based on γ-spectrometry. We find a staggering behaviour in the cumulative yields for Sn and a shift in the independent fission yields for Sb as compared to current evaluations. Plans for the future experimental program on fission yields and IYR measurements are discussed.

What Makes an Excellent Lecturer? Academics' Perspectives on the Discourse of "Teaching Excellence" in Higher Education

ERIC Educational Resources Information Center

Wood, Margaret; Su, Feng

2017-01-01

In the context of the Teaching Excellence Framework (TEF), we examine academics' perspectives on the discourse of "teaching excellence" based on an empirical study with 16 participants from five post-1992 universities. The article reports the findings on academics' views of the term and concept of "teaching excellence",…

Brain dead or not? CT angiogram yielding false-negative result on brain death confirmation

PubMed Central

Johnston, Robyn; Kaliaperumal, Chandrasekaran; Wyse, Gerald; Kaar, George

2013-01-01

We describe a case of severe traumatic brain injury with multiple facial and skull fractures where CT angiogram (CTA) failed to yield a definite result of brain death as an ancillary test. A 28-year-old man was admitted following a road traffic accident with a Glasgow Coma Score (GCS) of 3/15 and fixed pupils. CT brain revealed uncal herniation and diffuse cerebral oedema with associated multiple facial and skull fractures. 72 h later, his clinical condition remained the same with high intracranial pressure refractory to medical management. Clinical confirmation on brain death was not feasible owing to facial injuries. A CTA, performed to determine brain perfusion, yielded a ‘false-negative’ result. Skull fractures have possibly led to venous prominence in the cortical and deep venous drainage system. This point needs to be borne in mind while considering CTA as an ancillary test to confirm brain death. PMID:23302550

Optimizing rice yields while minimizing yield-scaled global warming potential.

PubMed

Pittelkow, Cameron M; Adviento-Borbe, Maria A; van Kessel, Chris; Hill, James E; Linquist, Bruce A

2014-05-01

To meet growing global food demand with limited land and reduced environmental impact, agricultural greenhouse gas (GHG) emissions are increasingly evaluated with respect to crop productivity, i.e., on a yield-scaled as opposed to area basis. Here, we compiled available field data on CH4 and N2 O emissions from rice production systems to test the hypothesis that in response to fertilizer nitrogen (N) addition, yield-scaled global warming potential (GWP) will be minimized at N rates that maximize yields. Within each study, yield N surplus was calculated to estimate deficit or excess N application rates with respect to the optimal N rate (defined as the N rate at which maximum yield was achieved). Relationships between yield N surplus and GHG emissions were assessed using linear and nonlinear mixed-effects models. Results indicate that yields increased in response to increasing N surplus when moving from deficit to optimal N rates. At N rates contributing to a yield N surplus, N2 O and yield-scaled N2 O emissions increased exponentially. In contrast, CH4 emissions were not impacted by N inputs. Accordingly, yield-scaled CH4 emissions decreased with N addition. Overall, yield-scaled GWP was minimized at optimal N rates, decreasing by 21% compared to treatments without N addition. These results are unique compared to aerobic cropping systems in which N2 O emissions are the primary contributor to GWP, meaning yield-scaled GWP may not necessarily decrease for aerobic crops when yields are optimized by N fertilizer addition. Balancing gains in agricultural productivity with climate change concerns, this work supports the concept that high rice yields can be achieved with minimal yield-scaled GWP through optimal N application rates. Moreover, additional improvements in N use efficiency may further reduce yield-scaled GWP, thereby strengthening the economic and environmental sustainability of rice systems. © 2013 John Wiley & Sons Ltd.

Characterizing Scitillation and Cherenkov Light Yield in Water-Based Liquid Scintillators

NASA Astrophysics Data System (ADS)

Land, B. J.; Caravaca, J.; Descamps, F. B.; Orebi Gann, G. D.

2016-03-01

The recent development of Water-based Liquid Scintillator (WbLS) has made it possible to produce scintillating materials with highly tunable light yields and excellent optical clarity. This allows for a straightforward combination of the directional properties of Cherenkov light with the greater energy resolution afforded by the typically brighter scintillation light, which lends itself well to a broad program of neutrino physics. Here we explore the light yields and optical properties of WbLS materials in development for Theia (formerly ASDC) as measured in our benchtop Theia R&D at Berkeley Lab and extrapolate to larger detectors.

Recent Results from Lohengrin on Fission Yields and Related Decay Properties

NASA Astrophysics Data System (ADS)

Serot, O.; Amouroux, C.; Bidaud, A.; Capellan, N.; Chabod, S.; Ebran, A.; Faust, H.; Kessedjian, G.; Köester, U.; Letourneau, A.; Litaize, O.; Martin, F.; Materna, T.; Mathieu, L.; Panebianco, S.; Regis, J.-M.; Rudigier, M.; Sage, C.; Urban, W.

2014-05-01

The Lohengrin mass spectrometer is one of the 40 instruments built around the reactor of the Institute Laue-Langevin (France) which delivers a very intense thermal neutron flux. Usually, Lohengrin was combined with a high-resolution ionization chamber in order to obtain good nuclear charge discrimination within a mass line, yielding an accurate isotopic yield determination. Unfortunately, this experimental procedure can only be applied for fission products with a nuclear charge less than about 42, i.e. in the light fission fragment region. Since 2008, a large collaboration has started with the aim of studying various fission aspects, mainly in the heavy fragment region. For that, a new experimental setup which allows isotopic identification by γ-ray spectrometry has been developed and validated. This technique was applied on the 239Pu(nth,f) reaction where about 65 fission product yields were measured with an uncertainty that has been reduced on average by a factor of 2 compared with what was that previously available in nuclear data libraries. The same γ-ray spectrometric technique is currently being applied to the study of the 233U(nth,f) reaction. Our aim is to deduce charge and mass distributions of the fission products and to complete the experimental data that exist mainly for light fission fragments. The measurement of 41 mass yields from the 241Am(2nth,f) reaction has been also performed. In addition to these activities on fission yield measurements, various new nanosecond isomers were discovered. Their presence can be revealed from a strong deformed ionic charge distribution compared to a 'normal' Gaussian shape. Finally, a new neutron long-counter detector designed to have a detection efficiency independent of the detected neutron energy has been built. Combining this neutron device with a Germanium detector and a beta-ray detector array allowed us to measure the beta-delayed neutron emission probability Pn of some important fission products for reactor

Whiskey springs long-term coast redwood density management; final growth, sprout, and yield results

Treesearch

Lynn A. Webb; James L. Lindquist; Erik Wahl; Andrew Hubb

2012-01-01

Multi-decadal studies of commercial and precommercial thinning in redwood stands are rare and consequently of value. The Whiskey Springs study at Jackson Demonstration State Forest has a data set spanning 35 years. In addition to growth and yield response to commercial thinning, the results provide important information for evaluating regeneration and...

Hydrodeoxygenation of the angelica lactone dimer, a cellulose-based feedstock: simple, high-yield synthesis of branched C7 -C10 gasoline-like hydrocarbons.

PubMed

Mascal, Mark; Dutta, Saikat; Gandarias, Inaki

2014-02-10

Dehydration of biomass-derived levulinic acid under solid acid catalysis and treatment of the resulting angelica lactone with catalytic K2 CO3 produces the angelica lactone dimer in excellent yield. This dimer serves as a novel feedstock for hydrodeoxygenation, which proceeds under relatively mild conditions with a combination of oxophilic metal and noble metal catalysts to yield branched C7 -C10 hydrocarbons in the gasoline volatility range. Considering that levulinic acid is available in >80 % conversion from raw biomass, a field-to-tank yield of drop-in, cellulosic gasoline of >60 % is possible. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Explorations in the Meanings of Excellence and Its Importance for Counselors: The Culture of Excellence in the United States

ERIC Educational Resources Information Center

Stewart, Alan E.

2010-01-01

Contemporary narratives of excellence embody the competitive striving and achievement themes underlying the idea of American exceptionalism. The author examines excellence through Aristotle's (trans. 2002) "Nicomachean Ethics". An overemphasis on winning or excelling can undermine general human excellence and harm well-being. Counselors are…

Proceedings of the Conferences on Excellence. Regents Advisory Committee on Graduate Study Conference on Excellence (Salt Fork State Park, Ohio, November 3-4, 1983) and Conference on Selective Excellence (Salt Fork State Park, Ohio, November 1-2, 1984).

ERIC Educational Resources Information Center

Ohio Board of Regents, Columbus.

The conferences reported in this document represent two phases of a process that has resulted in an array of programs to strengthen publicly assisted higher education in the state of Ohio. The following conference papers are provided: "A State Perspective on Excellence (and What Is Excellence?)" (Paul J. Olscamp); "The Role of the…

Lamoka, a variety with excellent chip color out of cold storage and resistance to the golden potato cyst nematode

USDA-ARS?s Scientific Manuscript database

Lamoka is a white-skinned, white-fleshed potato cultivar variety notable for excellent chip color from cold storage, good yield, and resistance to both common scab and race Ro1 of the golden potato cyst nematode (Globodera rostochiensis). It was selected from a cross made at Cornell University in 1...

Self-scheduling with Microsoft Excel.

PubMed

Irvin, S A; Brown, H N

1999-01-01

Excessive time was being spent by the emergency department (ED) staff, head nurse, and unit secretary on a complex 6-week manual self-scheduling system. This issue, plus inevitable errors and staff dissatisfaction, resulted in a manager-lead initiative to automate elements of the scheduling process using Microsoft Excel. The implementation of this initiative included: common coding of all 8-hour and 12-hour shifts, with each 4-hour period represented by a cell; the creation of a 6-week master schedule using the "count-if" function of Excel based on current staffing guidelines; staff time-off requests then entered by the department secretary; the head nurse, with staff input, then fine-tuned the schedule to provide even unit coverage. Outcomes of these changes included an increase in staff satisfaction, time saved by the head nurse, and staff work time saved because there was less arguing about the schedule. Ultimately, the automated self-scheduling method was expanded to the entire 700-bed hospital.

Leading Others Toward Excellence.

PubMed

Hupp, James R

2015-12-01

This essay puts forth the proposition that academic program excellence does not arise by accident. Effective leadership is required. To support this proposition, the essay discusses the characteristics common to effective leaders. It then proceeds to use the example of a successful academic oral-maxillofacial surgery department and characteristics of its leader to provide evidence that excellence derives from effective leadership. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Pledgeted repair of giant hiatal hernia provides excellent long-term results.

PubMed

Kang, Thomas; Urrego, Hernan; Gridley, Asahel; Richardson, William S

2014-10-01

Use of mesh in hiatal hernia repairs is a topic of debate. We present our experience in laparoscopic primary (nonmesh) repair of giant hiatal hernia. All laparoscopic antireflux procedures done by a single surgeon from November 1997 to October 2006 were retrospectively reviewed. Inclusion criteria were primary crural closure with pledgets and giant hiatal hernia (greater than one-third of the stomach in the chest by esophagram, greater than 5 cm in length endoscopically, or greater than one-third of the stomach in the chest operatively). We attempted to reach all patients who met inclusion criteria and administered the Reflux Symptom Index (RSI) and Quality of Life Scale for Gastroesophageal Reflux Disease (QLSGR) questionnaires. In total, 89 patients met inclusion criteria. The male-to-female ratio was 32:57. Average age was 62.7 years. Average body mass index was 29.3 kg/m(2). Average length of stay was 2 days, and mean clinic follow-up was 161 days. At the most recent follow-up, 62% of patients were asymptomatic. The most common postoperative symptoms were dysphagia (16%), reflux/emesis (5%), bloating (5%), nausea (4%), epigastric pain (4%), and heartburn (3%). There were six (6.7%) recurrences on esophagogastroduodenoscopy or upper gastrointestinal examination. Five patients with recurrence were symptomatic. Of the 89 patients, 29 (33%) completed the questionnaire, with a mean follow-up of 69.7 months. Average RSI score was 12 (maximum possible score, 45). In six of nine categories, the average score was less than 1 (possible score, 0-5). Average QLSGR score was 12 (maximum possible score, 45). For satisfaction with the present condition, the average score was 4.34 (maximum score, 5), and 82.7% of respondents were satisfied or very satisfied with their present condition. Laparoscopic primary repair of giant hiatal hernia provides excellent long-term results. We found that 62% of patients were asymptomatic at the last follow-up and that 82% of respondents were

The Z {yields} cc-bar {yields} {gamma}{gamma}*, Z {yields} bb-bar {yields} {gamma}{gamma}* triangle diagrams and the Z {yields} {gamma}{psi}, Z {yields} {gamma}Y decays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Achasov, N. N., E-mail: achasov@math.nsc.ru

2011-03-15

The approach to the Z {yields} {gamma}{psi} and Z {yields} {gamma}Y decay study is presented in detail, based on the sum rules for the Z {yields} cc-bar {yields} {gamma}{gamma}* and Z {yields} bb-bar {yields} {gamma}{gamma}* amplitudes and their derivatives. The branching ratios of the Z {yields} {gamma}{psi} and Z {yields} {gamma}Y decays are calculated for different hypotheses on saturation of the sum rules. The lower bounds of {Sigma}{sub {psi}} BR(Z {yields} {gamma}{psi}) = 1.95 Multiplication-Sign 10{sup -7} and {Sigma}{sub {upsilon}} BR(Z {yields} {gamma}Y) = 7.23 Multiplication-Sign 10{sup -7} are found. Deviations from the lower bounds are discussed, including the possibilitymore » of BR(Z {yields} {gamma}J/{psi}(1S)) {approx} BR(Z {yields} {gamma}Y(1S)) {approx} 10{sup -6}, that could be probably measured in LHC. The angular distributions in the Z {yields} {gamma}{psi} and Z {yields} {gamma}Y decays are also calculated.« less

Excellence Revisited.

ERIC Educational Resources Information Center

Silverman, Linda Kreger, Ed.

1993-01-01

Excellence in education of gifted children is the focus of this journal theme issue. Two articles are featured: (1) "Making Connections for the At-Risk Gifted Child" by Mary Kay Finholt and Kathy Peckron, describing an exemplary support system developed for at-risk gifted students in the Rockwood School District in Missouri, which…

Preparing data for analysis using microsoft Excel.

PubMed

Elliott, Alan C; Hynan, Linda S; Reisch, Joan S; Smith, Janet P

2006-09-01

A critical component essential to good research is the accurate and efficient collection and preparation of data for analysis. Most medical researchers have little or no training in data management, often causing not only excessive time spent cleaning data but also a risk that the data set contains collection or recording errors. The implementation of simple guidelines based on techniques used by professional data management teams will save researchers time and money and result in a data set better suited to answer research questions. Because Microsoft Excel is often used by researchers to collect data, specific techniques that can be implemented in Excel are presented.

Building Relationships, Yielding Results: How Superintendents Can Work with School Boards to Create Productive Teams

ERIC Educational Resources Information Center

Hackett, Julie L.

2015-01-01

In "Building Relationships, Yielding Results," the seasoned superintendent of an urban school district provides a clear road map for effective collaboration with school boards and the type of relationship-building required to achieve long-term, sustainable reforms. Instead of keeping school board members at arm's length or inundating…

Specific yield: compilation of specific yields for various materials

USGS Publications Warehouse

Johnson, A.I.

1967-01-01

Specific yield is defined as the ratio of (1) the volume of water that a saturated rock or soil will yield by gravity to (2) the total volume of the rock or soft. Specific yield is usually expressed as a percentage. The value is not definitive, because the quantity of water that will drain by gravity depends on variables such as duration of drainage, temperature, mineral composition of the water, and various physical characteristics of the rock or soil under consideration. Values of specific yields nevertheless offer a convenient means by which hydrologists can estimate the water-yielding capacities of earth materials and, as such, are very useful in hydrologic studies. The present report consists mostly of direct or modified quotations from many selected reports that present and evaluate methods for determining specific yield, limitations of those methods, and results of the determinations made on a wide variety of rock and soil materials. Although no particular values are recommended in this report, a table summarizes values of specific yield, and their averages, determined for 10 rock textures. The following is an abstract of the table. [Table

Acid soil infertility effects on peanut yields and yield components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blamey, F.P.C.

1983-01-01

The interpretation of soil amelioration experiments with peanuts is made difficult by the unpredictibility of the crop and by the many factors altered when ameliorating acid soils. The present study was conducted to investigate the effects of lime and gypsum applications on peanut kernel yield via the three first order yield components, pods per ha, kernels per pod, and kernel mass. On an acid medium sandy loam soil (typic Plinthustult), liming resulted in a highly significant kernel yield increase of 117% whereas gypsum applications were of no significant benefit. As indicated by path coefficient analysis, an increase in the numbermore » of pods per ha was markedly more important in increasing yield than an increase in either the number of kernels per pod or kernel mass. Furthermore, exch. Al was found to be particularly detrimental to pod number. It was postulated that poor peanut yields resulting from acid soil infertility were mainly due to the depressive effect of exch. Al on pod number. Exch. Ca appeared to play a secondary role by ameliorating the adverse effects of exch. Al.« less

Elements of Engineering Excellence

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer

2012-01-01

The inspiration for this Contract Report (CR) originated in discussions with the director of Marshall Space Flight Center (MSFC) Engineering who asked that we investigate the question: "How do you achieve excellence in aerospace engineering?" Engineering a space system is a complex activity. Avoiding its inherent potential pitfalls and achieving a successful product is a challenge. This CR presents one approach to answering the question of how to achieve Engineering Excellence. We first investigated the root causes of NASA major failures as a basis for developing a proposed answer to the question of Excellence. The following discussions integrate a triad of Technical Understanding and Execution, Partnership with the Project, and Individual and Organizational Culture. The thesis is that you must focus on the whole process and its underlying culture, not just on the technical aspects. In addition to the engineering process, emphasis is given to the need and characteristics of a Learning Organization as a mechanism for changing the culture.

Molecular Based Temperature and Strain Rate Dependent Yield Criterion for Anisotropic Elastomeric Thin Films

NASA Technical Reports Server (NTRS)

Bosi, F.; Pellegrino, S.

2017-01-01

A molecular formulation of the onset of plasticity is proposed to assess temperature and strain rate effects in anisotropic semi-crystalline rubbery films. The presented plane stress criterion is based on the strain rate-temperature superposition principle and the cooperative theory of yielding, where some parameters are assumed to be material constants, while others are considered to depend on specific modes of deformation. An orthotropic yield function is developed for a linear low density polyethylene thin film. Uniaxial and biaxial inflation experiments were carried out to determine the yield stress of the membrane via a strain recovery method. It is shown that the 3% offset method predicts the uniaxial elastoplastic transition with good accuracy. Both the tensile yield points along the two principal directions of the film and the biaxial yield stresses are found to obey the superposition principle. The proposed yield criterion is compared against experimental measurements, showing excellent agreement over a wide range of deformation rates and temperatures.

Generalizability of EXCEL and NOBLE results to a large registry population with unprotected left main coronary artery disease.

PubMed

Lee, Pil Hyung; Kang, Se Hun; Han, Seungbong; Ahn, Jung-Min; Bae, Jae Seok; Lee, Cheol Hyun; Kang, Soo-Jin; Lee, Seung-Whan; Kim, Young-Hak; Lee, Cheol Whan; Park, Seong-Wook; Park, Duk-Woo; Park, Seung-Jung

2017-12-01

The aim of this study was to determine how trial-based findings of EXCEL and NOBLE might be interpreted and generalizable in 'real-world' settings with comparison of data from the large-scaled, all-comer Interventional Research Incorporation Society-Left MAIN Revascularization (IRIS-MAIN) registry. We compared baseline clinical and procedural characteristics and also determined how the relative treatment effect of percutaneous coronary intervention (PCI) and coronary artery bypass grafting (CABG) was different in EXCEL and NOBLE, compared with those of the multicenter, IRIS-MAIN registry (n=2481). The primary outcome for between-study comparison was a composite of death, myocardial infarction (MI), or stroke. There were between-study differences in patient risk profiles (age, BMI, diabetes, and clinical presentation), lesion complexities, and procedural characteristics (stent type, the use of off-pump surgery, and radial artery); the proportion of diabetes and acute coronary syndrome was particularly lower in NOBLE than in other studies. Although there was interstudy heterogeneity for the protocol definition of MI, the risks for serious composite outcome of death, MI, or stroke were similar between PCI and CABG in EXCEL [hazard ratio (HR): 1.00; 95% confidence interval (CI): 0.79-1.26; P=0.98] and in the matched cohort of IRIS-MAIN (HR: 1.08; 95%CI: 0.85-1.38; P=0.53), whereas it was significantly higher after PCI than after CABG in NOBLE (HR: 1.47; 95%CI: 1.06-2.05; P=0.02), which was driven by more common MI and stroke after PCI. In the comparison of a large-sized, all-comer registry, the EXCEL trial might represent better generalizability with respect to baseline characteristics and observed clinical outcomes compared with the NOBLE trial.

Why Excel?

ERIC Educational Resources Information Center

Barreto, Humberto

2015-01-01

This article is not the usual Excel pedagogy fare in that it does not provide an application or example taught via a spreadsheet. Instead, it briefly reviews the history of spreadsheets in the economics classroom and explores the current environment, with an emphasis on modern learning theory. The conclusion is not surprising: spreadsheets improve…

No. 1 and No. 2 Common red oak yields: similar part sizes when gang-ripping is used to process boards with crook

Treesearch

Charles J. Gatchell; Charles J. Gatchell

1990-01-01

Computer simulation was used to gang rip No. 1 and No. 2 Common red oak boards before and after removal of crook. While No. 1 Common produced slightly more total yield, the part yields were very similar. No. 1 Common was superior only in yielding 75-inch-long pieces. Either grade is an excellent choice for the furniture and cabinet industries.

An Excel macro for generating trilinear plots.

PubMed

Shikaze, Steven G; Crowe, Allan S

2007-01-01

This computer note describes a method for creating trilinear plots in Microsoft Excel. Macros have been created in MS Excel's internal language: Visual Basic for Applications (VBA). A simple form has been set up to allow the user to input data from an Excel worksheet. The VBA macro is used to convert the triangular data (which consist of three columns of percentage data) into X-Y data. The macro then generates the axes, labels, and grid for the trilinear plot. The X-Y data are plotted as scatter data in Excel. By providing this macro in Excel, users can create trilinear plots in a quick, inexpensive manner.

75 FR 48661 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

... DEPARTMENT OF EDUCATION Equity and Excellence Commission AGENCY: U.S. Department of Education, Office for Civil Rights. ACTION: Notice of Establishment of the Equity and Excellence Commission. SUMMARY: The U.S. Secretary of Education (Secretary) announces the establishment of the Equity and Excellence...

Teaching Excellence Initiatives: Modalities and Operational Factors

ERIC Educational Resources Information Center

Land, Ray; Gordon, George

2015-01-01

Teaching excellence is at the centre of national and international higher education policy. The Higher Education Academy (HEA) is a part of the debate to develop a shared understanding of what constitutes teaching excellence and has published research including "Considering Teaching Excellence in Higher Education: 2007-2013" by Dr Vicky…

A highly efficient silole-containing dithienylethene with excellent thermal stability and fatigue resistance: a promising candidate for optical memory storage materials.

PubMed

Chan, Jacky Chi-Hung; Lam, Wai Han; Yam, Vivian Wing-Wah

2014-12-10

Diarylethene compounds are potential candidates for applications in optical memory storage systems and photoswitchable molecular devices; however, they usually show low photocycloreversion quantum yields, which result in ineffective erasure processes. Here, we present the first highly efficient photochromic silole-containing dithienylethene with excellent thermal stability and fatigue resistance. The photochemical quantum yields for photocyclization and photocycloreversion of the compound are found to be high and comparable to each other; the latter of which is rarely found in diarylethene compounds. These would give rise to highly efficient photoswitchable material with effective writing and erasure processes. Incorporation of the silole moiety as a photochromic dithienylethene backbone also was demonstrated to enhance the thermal stability of the closed form, in which the thermal backward reaction to the open form was found to be negligible even at 100 °C, which leads to a promising candidate for use as photoswitchable materials and optical memory storage.

Teaching excellence in nursing education: a caring framework.

PubMed

Sawatzky, Jo-Ann V; Enns, Carol L; Ashcroft, Terri J; Davis, Penny L; Harder, B Nicole

2009-01-01

Nursing education plays a central role in the ability to practice effectively. It follows that an optimally educated nursing workforce begets optimal patient care. A framework for excellence in nursing education could guide the development of novice educators, establish the basis for evaluating teaching excellence, and provide the impetus for research in this area. However, a review of the social sciences and nursing literature as well as a search for existing models for teaching excellence revealed an apparent dearth of evidence specific to excellence in nursing education. Therefore, we developed the Caring Framework for Excellence in Nursing Education. This framework evolved from a review of the generic constructs that exemplify teaching excellence: excellence in teaching practice, teaching scholarship, and teaching leadership. Nursing is grounded in the ethic of caring. Hence, caring establishes the foundation for this uniquely nursing framework. Because a teaching philosophy is intimately intertwined with one's nursing philosophy and the ethic of caring, it is also fundamental to the caring framework. Ideally, this framework will contribute to excellence in nursing education and as a consequence excellence in nursing practice and optimal patient care.

Discrimination against Women as a Subtext of Excellence.

ERIC Educational Resources Information Center

Watson, Scott B.

1993-01-01

Pursuing excellence in sport discriminates against women. Alongside the primary texts of the glories of excellence runs a subtext of inequality and discrimination. The paper traces the idea of sport as a quest for excellence through various interpretations of the meaning of sport, discussing excellence as a socially constructed concept. (SM)

First result from Q weak

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armstrong, David S.; Battaglieri, M.; D'Angelo, A.

2014-01-01

Initial results are presented from the recently-completed Q{sub weak} experiment at Jefferson Lab. The goal is a precise measurement of the proton's weak charge Q{sub w}{sup p}, to yield a test of the standard model and to search for evidence of new physics. The weak charge is extracted from the parity-violating asymmetry in elastic {rvec e}p scattering at low momentum transfer, Q{sup 2} = 0.025GeV{sup 2}. A 180 {micro} A longitudinally-polarized 1.16 GeV electron beam was scattered from a 35 cm long liquid hydrogen at small angles, 6 {degrees} < {theta} < 12 {degrees} Scattered electrons were analyzed in amore » toroidal magnetic field and detected using an array of eight Cerenkov detectors arranged symmetrically about the beam axis. The initial result, from 4% of the complete data set, is Q{sub W}{sup p} = 0.064 ± 0.012, in excellent agreement with the standard model expectation. Full analysis of the data is expected to yield a value for the weak charge to about 5% precision.« less

Understanding Yield Anomalies in ICF Implosions via Fully Kinetic Simulations

NASA Astrophysics Data System (ADS)

Taitano, William

2017-10-01

In the quest towards ICF ignition, plasma kinetic effects are among prime candidates for explaining some significant discrepancies between experimental observations and rad-hydro simulations. To assess their importance, high-fidelity fully kinetic simulations of ICF capsule implosions are needed. Owing to the extremely multi-scale nature of the problem, kinetic codes have to overcome nontrivial numerical and algorithmic challenges, and very few options are currently available. Here, we present resolutions of some long-standing yield discrepancy conundrums using a novel, LANL-developed, 1D-2V Vlasov-Fokker-Planck code iFP. iFP possesses an unprecedented fidelity and features fully implicit time-stepping, exact mass, momentum, and energy conservation, and optimal grid adaptation in phase space, all of which are critically important for ensuring long-time numerical accuracy of the implosion simulations. Specifically, we concentrate on several anomalous yield degradation instances observed in Omega campaigns, with the so-called ``Rygg effect'', or an anomalous yield scaling with the fuel composition, being a prime example. Understanding the physical mechanisms responsible for such degradations in non-ignition-grade Omega experiments is of great interest, as such experiments are often used for platform and diagnostic development, which are then used in ignition-grade experiments on NIF. In the case of Rygg's experiments, effects of a kinetic stratification of fuel ions on the yield have been previously proposed as the anomaly explanation, studied with a kinetic code FPION, and found unimportant. We have revisited this issue with iFP and obtained excellent yield-over-clean agreement with the original Rygg results, and several subsequent experiments. This validates iFP and confirms that the kinetic fuel stratification is indeed at the root of the observed yield degradation. This work was sponsored by the Metropolis Postdoctoral Fellowship, LDRD office, Thermonuclear Burn

Measuring the absolute deuterium-tritium neutron yield using the magnetic recoil spectrometer at OMEGA and the NIF.

PubMed

Casey, D T; Frenje, J A; Gatu Johnson, M; Séguin, F H; Li, C K; Petrasso, R D; Glebov, V Yu; Katz, J; Knauer, J P; Meyerhofer, D D; Sangster, T C; Bionta, R M; Bleuel, D L; Döppner, T; Glenzer, S; Hartouni, E; Hatchett, S P; Le Pape, S; Ma, T; MacKinnon, A; McKernan, M A; Moran, M; Moses, E; Park, H-S; Ralph, J; Remington, B A; Smalyuk, V; Yeamans, C B; Kline, J; Kyrala, G; Chandler, G A; Leeper, R J; Ruiz, C L; Cooper, G W; Nelson, A J; Fletcher, K; Kilkenny, J; Farrell, M; Jasion, D; Paguio, R

2012-10-01

A magnetic recoil spectrometer (MRS) has been installed and extensively used on OMEGA and the National Ignition Facility (NIF) for measurements of the absolute neutron spectrum from inertial confinement fusion implosions. From the neutron spectrum measured with the MRS, many critical implosion parameters are determined including the primary DT neutron yield, the ion temperature, and the down-scattered neutron yield. As the MRS detection efficiency is determined from first principles, the absolute DT neutron yield is obtained without cross-calibration to other techniques. The MRS primary DT neutron measurements at OMEGA and the NIF are shown to be in excellent agreement with previously established yield diagnostics on OMEGA, and with the newly commissioned nuclear activation diagnostics on the NIF.

Ensemble brightening and enhanced quantum yield in size-purified silicon nanocrystals

DOE PAGES

Miller, Joseph B.; Van Sickle, Austin R.; Anthony, Rebecca J.; ...

2012-07-18

Here, we report on the quantum yield, photoluminescence (PL) lifetime and ensemble photoluminescent stability of highly monodisperse plasma-synthesized silicon nanocrystals (SiNCs) prepared though density-gradient ultracentrifugation in mixed organic solvents. Improved size uniformity leads to a reduction in PL line width and the emergence of entropic order in dry nanocrystal films. We find excellent agreement with the anticipated trends of quantum confinement in nanocrystalline silicon, with a solution quantum yield that is independent of nanocrystal size for the larger fractions but decreases dramatically with size for the smaller fractions. We also find a significant PL enhancement in films assembled from themore » fractions, and we use a combination of measurement, simulation and modeling to link this ‘brightening’ to a temporally enhanced quantum yield arising from SiNC interactions in ordered ensembles of monodisperse nanocrystals. Using an appropriate excitation scheme, we exploit this enhancement to achieve photostable emission.« less

Bronson Methodist Hospital: journey to excellence in quality and safety.

PubMed

Knapp, Cheryl

2006-10-01

Bronson Healthcare Group, a 343-bed not-for-profit health care system serving all of southwest Michigan and northern Indiana, has as its flagship Bronson Methodist Hospital, the recipient of the 2005 Malcolm Baldrige National Quality Award. The Baldrige criteria were used to formalize Bronson's approach to performance excellence. The strategic plan is condensed and communicated via a "Plan for Excellence" focused on three strategies: clinical excellence, customer and service excellence, and corporate effectiveness. Initiatives include clinical scene investigation (a system for reporting and investigating sentinel and atypical events), a strategy for educating staff in the Situation-Background-Assessment-Recommendations (SBAR) communication technique, and mandatory influenza immunization for health care staff (safety), patient health literacy needs and a health information center (patient centeredness); methods to reduce bloodstream and ventilator-acquired pneumonia infections (effectiveness); a physician portal for access to forms, test results, and patient information (efficiency); restaurant-style pagers for patients and families while waiting (timeliness); and community outreach (equity). Bronson's journey to excellence continues with more accountability for hand-off communication and teamwork, enhancing a non-punitive environment for patient safety reporting, and further incorporating patient and family involvement.

Excel VBA for Physicists; A Primer

NASA Astrophysics Data System (ADS)

Liengme, Bernard V.

2016-11-01

This book is both an introduction and a demonstration of how Visual Basic for Applications (VBA) can greatly enhance Microsoft Excel® by giving users the ability to create their own functions within a worksheet and to create subroutines to perform repetitive actions. The book is written so readers are encouraged to experiment with VBA programming with examples using fairly simple physics or non-complicated mathematics such as root finding and numerical integration. Tested Excel® workbooks are available for each chapter and there is nothing to buy or install. A tested Excel workbook for each chapter can be downloaded from Book information

What Price Excellence?

ERIC Educational Resources Information Center

Fischer, Robert J.; Wass, Hannelore

1970-01-01

This article discusses through the use of three case studies, the possible problems caused by pressure placed on high achievers to excell academically. Perhaps the maximization of academic achievement may well be accomplished at some crucial personal or social cost for the individual. (Author/KJ)

Donor management parameters and organ yield: single center results.

PubMed

Marshall, George Ryne; Mangus, Richard S; Powelson, John A; Fridell, Jonathan A; Kubal, Chandrashekhar A; Tector, A Joseph

2014-09-01

Management of organ donors in the intensive care unit is an emerging subject in critical care and transplantation. This study evaluates organ yield outcomes for a large number of patients managed by the Indiana Organ Procurement Organization. This is a retrospective review of intensive care unit records from 2008-2012. Donor demographic information and seven donor management parameters (DMP) were recorded at admission, consent, 12 h after consent, and before procurement. Three study groups were created: donors meeting 0-3, 4, or 5-7 DMP. Active donor Organ Procurement Organization management began at consent; so, data analysis focuses on the 12-h postconsent time point. Outcomes included organs transplanted per donor (OTPD) and transplantation of individual solid organs. Complete records for 499 patients were reviewed. Organ yield was 1415 organs of 3992 possible (35%). At 12 h, donors meeting more DMP had more OTPD: 2.2 (0-3) versus 3.0 (4) versus 3.5 (5-7) (P < 0.01). Aggregate DMP met was significantly associated with transplantation of every organ except intestine. Oxygen tension, vasopressor use, and central venous pressure were the most frequent independent predictors of organ usage. There were significantly more organs transplanted for donors meeting all three of these parameters (4.5 versus 2.7, P < 0.01). Initial DMP met does not appear to be a significant prognostic factor for OTPD. Aggregate DMP is associated with transplantation rates for most organs, with analysis of individual parameters suggesting that appropriate management of oxygenation, volume status, and vasopressor use could lead to more organs procured per donor. Copyright © 2014 Elsevier Inc. All rights reserved.

High Five: Building Capacity for School Excellence

ERIC Educational Resources Information Center

McCullen, Caroline

2006-01-01

In 2004, five North Carolina school districts combined forces with five corporate foundations to leverage their collective wisdom and develop regional strategies for school improvement. The result was the High Five Regional Partnership for High School Excellence, a corporate-public sector effort that had the common goal of improving graduation…

Separation of photoactive conformers based on hindered diarylethenes: efficient modulation in photocyclization quantum yields.

PubMed

Li, Wenlong; Jiao, Changhong; Li, Xin; Xie, Yongshu; Nakatani, Keitaro; Tian, He; Zhu, Weihong

2014-04-25

Endowing both solvent independency and excellent thermal bistability, the benzobis(thiadiazole)-bridged diarylethene system provides an efficient approach to realize extremely high photocyclization quantum yields (Φo-c , up to 90.6 %) by both separating completely pure anti-parallel conformer and suppressing intramolecular charge transfer (ICT). © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Physiologically based pharmacokinetic modeling using microsoft excel and visual basic for applications.

PubMed

Marino, Dale J

2005-01-01

Abstract Physiologically based pharmacokinetic (PBPK) models are mathematical descriptions depicting the relationship between external exposure and internal dose. These models have found great utility for interspecies extrapolation. However, specialized computer software packages, which are not widely distributed, have typically been used for model development and utilization. A few physiological models have been reported using more widely available software packages (e.g., Microsoft Excel), but these tend to include less complex processes and dose metrics. To ascertain the capability of Microsoft Excel and Visual Basis for Applications (VBA) for PBPK modeling, models for styrene, vinyl chloride, and methylene chloride were coded in Advanced Continuous Simulation Language (ACSL), Excel, and VBA, and simulation results were compared. For styrene, differences between ACSL and Excel or VBA compartment concentrations and rates of change were less than +/-7.5E-10 using the same numerical integration technique and time step. Differences using VBA fixed step or ACSL Gear's methods were generally <1.00E-03, although larger differences involving very small values were noted after exposure transitions. For vinyl chloride and methylene chloride, Excel and VBA PBPK model dose metrics differed by no more than -0.013% or -0.23%, respectively, from ACSL results. These differences are likely attributable to different step sizes rather than different numerical integration techniques. These results indicate that Microsoft Excel and VBA can be useful tools for utilizing PBPK models, and given the availability of these software programs, it is hoped that this effort will help facilitate the use and investigation of PBPK modeling.

The role of social media in clinical excellence.

PubMed

Batt-Rawden, Samantha; Flickinger, Tabor; Weiner, John; Cheston, Christine; Chisolm, Margaret

2014-07-01

The provision of excellent patient care is a goal shared by all doctors. The role of social media (SM) in helping medical students and doctors achieve clinical excellence is unknown. Social media may help facilitate the achievement of clinical excellence This report aimed to identify examples of how SM may be used to help promote the achievement of clinical excellence in medical learners. Three of the authors previously conducted a systematic review of the published literature on SM use in undergraduate, graduate and continuing medical education. Two authors re-examined the 14 evaluative studies to identify any examples of SM use that may facilitate the achievement of clinical excellence and to consider whether there were any aspects of clinical excellence for which no studies had been performed, and, if so, whether SM was relevant to these domains. Each study touched on one or more of the following domains of clinical excellence: communication and interpersonal skills; professionalism and humanism; knowledge; diagnostic acumen; exhibiting a passion for patient care; a scholarly approach to clinical practice; and explicitly modelling expertise to medical trainees. No study addressed the role of SM to promote the skillful negotiation of the health care system, and in collaboration with investigators to advance science and discovery; however, additional evidence suggested that SM may play an adjunctive role in promoting the achievement of these aspects of clinical excellence. This report supports the hypothesis that SM may help facilitate the achievement of clinical excellence; however, further research is needed into the role of SM in promoting the achievement of clinical excellence. © 2014 John Wiley & Sons Ltd.

Escape Excel: A tool for preventing gene symbol and accession conversion errors

PubMed Central

Stewart, Paul A.; Kuenzi, Brent M.; Eschrich, James A.

2017-01-01

Background Microsoft Excel automatically converts certain gene symbols, database accessions, and other alphanumeric text into dates, scientific notation, and other numerical representations. These conversions lead to subsequent, irreversible, corruption of the imported text. A recent survey of popular genomic literature estimates that one-fifth of all papers with supplementary gene lists suffer from this issue. Results Here, we present an open-source tool, Escape Excel, which prevents these erroneous conversions by generating an escaped text file that can be safely imported into Excel. Escape Excel is implemented in a variety of formats (http://www.github.com/pstew/escape_excel), including a command line based Perl script, a Windows-only Excel Add-In, an OS X drag-and-drop application, a simple web-server, and as a Galaxy web environment interface. Test server implementations are accessible as a Galaxy interface (http://apostl.moffitt.org) and simple non-Galaxy web server (http://apostl.moffitt.org:8000/). Conclusions Escape Excel detects and escapes a wide variety of problematic text strings so that they are not erroneously converted into other representations upon importation into Excel. Examples of problematic strings include date-like strings, time-like strings, leading zeroes in front of numbers, and long numeric and alphanumeric identifiers that should not be automatically converted into scientific notation. It is hoped that greater awareness of these potential data corruption issues, together with diligent escaping of text files prior to importation into Excel, will help to reduce the amount of Excel-corrupted data in scientific analyses and publications. PMID:28953918

Patient satisfaction: focusing on "excellent".

PubMed

Otani, Koichiro; Waterman, Brian; Faulkner, Kelly M; Boslaugh, Sarah; Burroughs, Thomas E; Dunagan, W Claiborne

2009-01-01

In an emerging competitive market such as healthcare, managers should focus on achieving excellent ratings to distinguish their organization from others. When it comes to customer loyalty, "excellent" has a different meaning. Customers who are merely satisfied often do not come back. The purpose of this study was to find out what influences adult patients to rate their overall experience as "excellent." The study used patient satisfaction data collected from one major academic hospital and four community hospitals. After conducting a multiple logistic regression analysis, certain attributes were shown to be more likely than others to influence patients to rate their experiences as excellent. The study revealed that staff care is the most influential attribute, followed by nursing care. These two attributes are distinctively stronger drivers of overall satisfaction than are the other attributes studied (i.e., physician care, admission process, room, and food). Staff care and nursing care are under the control of healthcare managers. If improvements are needed, they can be accomplished through training programs such as total quality management or continuous quality improvement, through which staff employees and nurses learn to be sensitive to patients' needs. Satisfying patients' needs is the first step toward having loyal patients, so hospitals that strive to ensure their patients are completely satisfied are more likely to prosper.

Slope Controls Grain Yield and Climatic Yield in Mountainous Yunnan province, China

NASA Astrophysics Data System (ADS)

Duan, X.; Rong, L.; Gu, Z.; Feng, D.

2017-12-01

Mountainous regions are increasingly vulnerable to food insecurity because of limited arable land, growing population pressure, and climate change. Development of sustainable mountain agriculture will require an increased understanding of the effects of environmental factors on grain and climatic yields. The objective of this study was to explore the relationships between actual grain yield, climatic yield, and environmental factors in a mountainous region in China. We collected data on the average grain yield per unit area in 119 counties in Yunnan province from 1985 to 2012, and chose 17 environmental factors for the same period. Our results showed that actual grain yield ranged from 1.43 to 6.92 t·ha-1, and the climatic yield ranged from -0.15 to -0.01 t·ha-1. Lower climatic yield but higher grain yield was generally found in central areas and at lower slopes and elevations in the western and southwestern counties of Yunnan province. Higher climatic yield but lower grain yield were found in northwestern parts of Yunnan province on steep slopes. Annual precipation and temperature had a weak influence on the climatic yield. Slope explained 44.62 and 26.29% of the variation in grain yield and climatic yield. The effects of topography on grain and climatic yields were greater than climatic factors. Slope was the most important environmental variable for the variability in climatic and grain yields in the mountainous Yunnan province due to the highly heterogeneous topographic conditions. Conversion of slopes to terraces in areas with higher climatic yields is an effective way to maintain grain production in response to climate variability. Additionally, soil amendments and soil and water conservation measures should be considered to maintain soil fertility and aid in sustainable development in central areas, and in counties at lower slopes and elevations in western and southwestern Yunnan province.

Getting the Best out of Excel

ERIC Educational Resources Information Center

Heys, Chris

2008-01-01

Excel, Microsoft's spreadsheet program, offers several tools which have proven useful in solving some optimization problems that arise in operations research. We will look at two such tools, the Excel modules called Solver and Goal Seek--this after deriving an equation, called the "cash accumulation equation", to be used in conjunction with them.

Organizing for Excellence.

ERIC Educational Resources Information Center

Duttweiler, Patricia Cloud

Factors that contribute to excellence in education, as well as those that have contributed to the failure of change efforts, are the subject of this document. It provides a summary of the literature on reform efforts; effective schools; new organizational perspectives derived from the business sector; organizational restructuring being tested in…

Electrorheological fluid with an extraordinarily high yield stress

NASA Astrophysics Data System (ADS)

Zhang, Yuling; Lu, Kunquan; Rao, Guanghui; Tian, Yu; Zhang, Shaohua; Liang, Jingkui

2002-02-01

Surface modified complex strontium titanate microparticles are synthesized by means of a modified sol-gel technique. A suspension composed of these particles immersed in a silicone oil exhibits excellent electrorheological properties attractive to industry and technology applications: a yield stress as high as 27 kPa in an applied electric field of 3 kV/mm, a low leakage current, wide dynamic ranges in temperature and shear rate, and a long-term stability against sedimentation. In addition to the high dielectric constant of strontium titanate, surfactant and water-free character of the particles may be responsible for the dramatic improvement of the electrorheological properties of the suspension.

Fabrication of Porous Ag/TiO2/Au Coatings with Excellent Multipactor Suppression

PubMed Central

Wu, Duoduo; Ma, Jianzhong; Bao, Yan; Cui, Wanzhao; Hu, Tiancun; Yang, Jing; Bai, Yuanrui

2017-01-01

Porous Ag/TiO2/Au coatings with excellent multipactor suppression were prepared by fabrication of porous Ag surface through two-step wet chemical etching, synthesis of TiO2 coatings by electroless-plating-like solution deposition and deposition of Au coatings via electroless plating. Porous structure of Ag surface, TiO2 coatings on porous Ag surface and Au coatings on porous Ag/TiO2 surface were verified by field-emission scanning electron microscopy, the composition and crystal type of TiO2 coatings was characterized by X-ray photoelectron spectroscopy and X-ray diffraction. Secondary electron yield (SEY) measurement was used to monitor the SEY coefficient of the porous Ag coatings and Ag/TiO2/Au coatings. The as-obtained porous Ag coatings were proved exhibiting low SEY below 1.2, and the process was highly reproducible. In addition, the porous Ag/TiO2/Au coatings showed excellent multipactor suppression with the SEY 1.23 and good environmental stability. It is worth mentioning that the whole preparation process is simple and feasible, which would provide a promising application in RF devices. PMID:28281546

Reaching for Excellence.

ERIC Educational Resources Information Center

Wright, Emmett L.; Perna, Jack A.

1992-01-01

Presents the four program goals for biology set forth in the National Science Teacher Association's "A Focus on Excellence: Biology Revisited" to (1) address biosphere, human society, and individual needs; (2) encourage students to experience, understand, and appreciate of natural systems; (3) apply the basic concept of the biosphere; and (4)…

Excellent Teachers' Thinking Model: Implications for Effective Teaching

ERIC Educational Resources Information Center

Hamzah, Sahandri G.; Mohamad, Hapidah; Ghorbani, Mohammad R.

2008-01-01

This study aimed to suggest an Excellent Teacher Thinking Model that has the potential to be utilized in the development of excellent teachers. Interaction survey method using survey questions, observation, document review and interview was conducted in this study. One hundred and five excellent teachers were selected randomly as research…

Teaching, in Spite of Excellence: Recovering a Practice of Teaching-Led Research

ERIC Educational Resources Information Center

Charles, Matthew

2018-01-01

Although, as a result of the introduction of the Teaching Excellence Framework, the principle of teaching excellence is receiving renewed attention in English higher education, the idea has been left largely undefined. The cynic might argue, in agreement with Bill Readings, that this lack of a precise definition is deliberate, since teaching…

Predicting paddlefish roe yields using an extension of the Beverton–Holt equilibrium yield-per-recruit model

USGS Publications Warehouse

Colvin, M.E.; Bettoli, Phillip William; Scholten, G.D.

2013-01-01

Equilibrium yield models predict the total biomass removed from an exploited stock; however, traditional yield models must be modified to simulate roe yields because a linear relationship between age (or length) and mature ovary weight does not typically exist. We extended the traditional Beverton-Holt equilibrium yield model to predict roe yields of Paddlefish Polyodon spathula in Kentucky Lake, Tennessee-Kentucky, as a function of varying conditional fishing mortality rates (10-70%), conditional natural mortality rates (cm; 9% and 18%), and four minimum size limits ranging from 864 to 1,016mm eye-to-fork length. These results were then compared to a biomass-based yield assessment. Analysis of roe yields indicated the potential for growth overfishing at lower exploitation rates and smaller minimum length limits than were suggested by the biomass-based assessment. Patterns of biomass and roe yields in relation to exploitation rates were similar regardless of the simulated value of cm, thus indicating that the results were insensitive to changes in cm. Our results also suggested that higher minimum length limits would increase roe yield and reduce the potential for growth overfishing and recruitment overfishing at the simulated cm values. Biomass-based equilibrium yield assessments are commonly used to assess the effects of harvest on other caviar-based fisheries; however, our analysis demonstrates that such assessments likely underestimate the probability and severity of growth overfishing when roe is targeted. Therefore, equilibrium roe yield-per-recruit models should also be considered to guide the management process for caviar-producing fish species.

The Effect of Using Microsoft Excel in a High School Algebra Class

ERIC Educational Resources Information Center

Neurath, Rachel A.; Stephens, Larry J.

2006-01-01

The purpose of this study was to investigate the effect of integrating Microsoft Excel into a high school algebra class. The results indicate a slight increase in student achievement when Excel was used. A teacher-created final exam and two Criterion Referenced Tests measured success. One of the Criterion Referenced Tests indicated that the…

Mobile-media pragmatism: innovation excellences and encumbrances

NASA Astrophysics Data System (ADS)

Lin, Chen-Ju

2017-10-01

Establishing two pragmatic models of enhancing entertainment and job-performance, this study aims to elaborate on how people adopt and perceive innovation excellences and encumbrances of modern mobile-media services through reflecting on their intrinsic expectancy. A survey methodology was executed to examine the hypothesised variable relationships using the purposive sampling method. CHT's Taipei think-tank head-office provided this study with a representative sampling frame and assisted to collect data from 725 focused subjects (with normative characteristics) who subscribed to HiNet or MOD, or predominantly used 4G telecommunication services. As a result of adopting the structural equation modelling test, the models of perceived innovation excellences and innovation encumbrances were affirmatively established to interpret the two applicative scenarios: entertainment and job-performance enhancement. Several valuable findings were generated. When a consumer targets entertainment technology pragmatism, he or she may stress the importance of innovative excellences, especially on product novelty. For the sake of pursuing job-performance enhancement, a customer was actively willing to invest his or her energy to meet and deal with the learning cost, customer unfamiliarity and complexity of telecom products and services. Importantly, the adopter's previous experiences with telecom products in the IT domain could effectively moderate the effect of pursuing new telecom innovation, adopting the product, and then strengthening self-evaluation.

Enhancing Teaching using MATLAB Add-Ins for Excel

ERIC Educational Resources Information Center

Hamilton, Paul V.

2004-01-01

In this paper I will illustrate how to extend the capabilities of Microsoft Excel spreadsheets with add-ins created by MATLAB. Excel provides a broad array of fundamental tools but often comes up short when more sophisticated scenarios are involved. To overcome this short-coming of Excel while retaining its ease of use, I will describe how…

THE LINDA CRANE MEMORIAL LECTURE: Striving for Excellence

PubMed Central

Hayes, Sherrill H

2010-01-01

Historically, invited lecturers have often challenged us to define excel lence in physical therapy practice, or in our academic programs. While some have addressed different char acteristics of excellence, our profession has not really come together to address 2 very important questions: what does “quality” mean in physical therapist education? And how do we measure it? Using 3 elements of Friendship, Leadership, and Mentoring, and Defining Excellence and juxtaposing these with Linda Crane and her life, a vision of excellence in physical therapy educational programs was explored in this invited lecture. The text of that lecture ensues. PMID:20520760

Sustainable-yield estimation for the Sparta Aquifer in Union County, Arkansas

USGS Publications Warehouse

Hays, Phillip D.

2000-01-01

Options for utilizing alternative sources of water to alleviate overdraft from the Sparta aquifer and ensure that the aquifer can continue to provide abundant water of excellent quality for the future are being evaluated by water managers in Union County. Sustainable yield is a critical element in identifying and designing viable water supply alternatives. With sustainable yield defined and a knowledge of total water demand in an area, any unmet demand can be calculated. The ground-water flow model of the Sparta aquifer was used to estimate sustainable yield using an iterative approach. The Sparta aquifer is a confined aquifer of regional importance that comprises a sequence of unconsolidated sand units that are contained within the Sparta Sand. Currently, the rate of withdrawal in some areas greatly exceeds the rate of recharge to the aquifer and considerable water-level declines have occurred. Ground-water flow model results indicate that the aquifer cannot continue to meet growing water-use demands indefinitely and that water levels will drop below the top of the primary producing sand unit in Union County (locally termed the El Dorado sand) by 2008 if current water-use trends continue. Declines of that magnitude will initiate dewatering of the El Dorado sand. The sustainable yield of the aquifer was calculated by targeting a specified minimum acceptable water level within Union County and varying Union County pumpage within the model to achieve the target water level. Selection of the minimum target water level for sustainable-yield estimation was an important criterion for the modeling effort. In keeping with the State Critical Ground-Water Area designation criteria and the desire of water managers in Union County to improve aquifer conditions and bring the area out of the Critical Ground-Water Area designation, the approximate altitude of the top of the Sparta Sand in central Union County was used as the minimum water level target for estimation of

Auto Draw from Excel Input Files

NASA Technical Reports Server (NTRS)

Strauss, Karl F.; Goullioud, Renaud; Cox, Brian; Grimes, James M.

2011-01-01

The design process often involves the use of Excel files during project development. To facilitate communications of the information in the Excel files, drawings are often generated. During the design process, the Excel files are updated often to reflect new input. The problem is that the drawings often lag the updates, often leading to confusion of the current state of the design. The use of this program allows visualization of complex data in a format that is more easily understandable than pages of numbers. Because the graphical output can be updated automatically, the manual labor of diagram drawing can be eliminated. The more frequent update of system diagrams can reduce confusion and reduce errors and is likely to uncover symmetric problems earlier in the design cycle, thus reducing rework and redesign.

Developing talent for operational excellence.

PubMed

Theadore, Jason C; O'Brien, Thaddeus J

2012-01-01

Many organizations have the expectation that their employees will prepare for their own professional development without much support or guidance. To achieve operational excellence, development of the people in an organization is just as important as the development of technologies and processes. Ohio Health Ambulatory Division in Columbus, OH created a plan to develop its people systematically in three distinct pillars: management development, staff engagement, and clinical excellence. Much was learned about talent development since work began on "The People Plan", perhaps the most critical lesson learned has been the importance of not giving up on the effort.

Use of an Additional 19-G EBUS-TBNA Needle Increases the Diagnostic Yield of EBUS-TBNA.

PubMed

Garrison, Garth; Leclair, Timothy; Balla, Agnes; Wagner, Sarah; Butnor, Kelly; Anderson, Scott R; Kinsey, C Matthew

2018-06-12

Although endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) has an excellent diagnostic yield, there remain cases where the diagnosis is not obtained. We hypothesized that additional sampling with a 19-G EBUS-TBNA needle may increase diagnostic yield in a subset of cases where additional tissue sampling was required. Indications for use of the 19-G needle following 22-G sampling with rapid on-site cytologic examination were: (1) diagnostic uncertainty of the on-site cytopathologist (eg, nondiagnostic, probable lymphoma, etc.), (2) non-small cell lung cancer with probable need for molecular genetic and/or PD-L1 testing, or (3) need for a larger tissue sample for consideration of inclusion in a research protocol. A 19-G EBUS-TBNA needle was utilized following standard sampling with a 22-G needle in 48 patients (50 sites) during the same procedure. Although the diagnostic yield between the needles was equivalent, the concordance rate was only 83%. The 19-G determined a diagnosis in 4 additional patients (8%) and provided additional histopathologic information in 6 other cases (12%). Conversely, in 3 cases (6%) diagnostic information was provided only by the 22-G needle. Compared with 22-G EBUS-TBNA alone, sampling with both the 22- and 19-G EBUS needles resulted in an increase in diagnostic yield from 92% to 99% (P=0.045) and a number needed to sample of 13 patients to provide one additional diagnosis. There were no significant complications. In select cases where additional tissue may be needed, sampling with a 19-G EBUS needle following standard aspiration with a 22-G needle results in an increase in diagnostic yield.

How Statistics "Excel" Online.

ERIC Educational Resources Information Center

Chao, Faith; Davis, James

2000-01-01

Discusses the use of Microsoft Excel software and provides examples of its use in an online statistics course at Golden Gate University in the areas of randomness and probability, sampling distributions, confidence intervals, and regression analysis. (LRW)

Synthesis and characterization of poly (dihydroxybiphenyl borate) with high char yield for high-performance thermosetting resins

NASA Astrophysics Data System (ADS)

Wang, Shujuan; Xing, Xiaolong; Li, Jian; Jing, Xinli

2018-01-01

The objective of the current work is to synthesize novel boron-containing polymers with excellent thermal resistance, and reveal the structure and the reason for the high char yield. Thus, poly (dihydroxybiphenyl borate) (PDDB) with a more rigid molecular chain, was successfully synthesized using 4,4‧-dihydroxybiphenyl and boric acid. Structural characterizations of the prepared PDDB were performed via NMR, FTIR, XPS, and XRD analyses. The results reveal that PDDB consists of aromatic, Phsbnd Osbnd B and Bsbnd Osbnd B structures as well as a small number of boron hydroxyl and phenolic hydroxyl groups. PDDB shows good solubility in strong polar solvents, which is of great importance for the modification of thermosetting resins. TGA combined with DSC were employed to evaluate the thermal properties of PDDB, and increases in the glass transition temperature (Tg) and char yield were observed with increased boron content. Tg and char yield of PDDB (800 °C, nitrogen atmosphere) reached up to 219 °C and 66.5%, respectively. PDDB was extensively characterized during pyrolysis to reveal the high char yield of PDDB. As briefly discussed, the boron oxide and boron carbide that formed during pyrolysis play a crucial role in the high char yield of PDDB, which reduces the release of volatile carbon dioxide and carbon. This research suggests that PDDB has great potential as a novel modified agent for the improvement of the comprehensive performance of thermosetting resins to broaden their applicability in the field of advanced composites.

Excellence through Minimum Essentials and Individual Development.

ERIC Educational Resources Information Center

Alexander, William M.

1986-01-01

The author states that throughout the past century or more, especially during the twentieth century, the continuing conflict between proponents of the minimum essentials approach to curriculum excellence and those of the individual development approach has been an obstacle to the achievement of excellence. (CT)

77 FR 29621 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-18

...: The Commission will meet in Washington, DC at the United States Department of Education at 400... Equity and Excellence Commission will hold an open meeting in Washington, DC at the United States... DEPARTMENT OF EDUCATION Equity and Excellence Commission AGENCY: U.S. Department of Education...

Clinical excellence in academia: perspectives from masterful academic clinicians.

PubMed

Christmas, Colleen; Kravet, Steven J; Durso, Samuel C; Wright, Scott M

2008-09-01

To better understand and characterize clinical excellence in academia by exploring the perspectives of clinically excellent faculty in the top American departments of medicine. Between March 1 and May 31, 2007, 2 investigators conducted in-depth semistructured interviews with 24 clinically excellent Department of Medicine physicians at 8 academic institutions. Interview transcripts were independently analyzed by 2 investigators and compared for agreement. Content analysis identified several major themes that relate to clinical excellence in academia. Physicians hailed from a range of internal medicine specialties; 20 (83%) were associate professors or professors and 8 (33%) were women. The mean percentage of time physicians spent in clinical care was 48%. Eight domains emerged as the major features of clinical excellence in academia: reputation, communication and interpersonal skills, professionalism and humanism, diagnostic acumen, skillful negotiation of the health care system, knowledge, scholarly approach to clinical care, and passion for clinical medicine. Understanding the core elements that contribute to clinical excellence in academia represents a pivotal step to defining clinical excellence in this setting. It is hoped that such work will lead to initiatives aimed at measuring and rewarding clinical excellence in our academic medical centers such that the most outstanding clinicians feel valued and decide to stay in academia to serve as role models for medical trainees.

77 FR 484 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-05

... DEPARTMENT OF EDUCATION Equity and Excellence Commission AGENCY: Office for Civil Rights, U.S. Department of Education. ACTION: Notice of an open meeting. SUMMARY: This notice sets forth the schedule and proposed agenda of an up-coming meeting of the Equity and Excellence Commission (Commission). The notice...

76 FR 62394 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... DEPARTMENT OF EDUCATION Equity and Excellence Commission AGENCY: Office for Civil Rights, U.S. Department of Education. ACTION: Notice of An Open Meeting. SUMMARY: This notice sets forth the schedule and proposed agenda of an up-coming meeting of the Equity and Excellence Commission (Commission). The notice...

77 FR 31605 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-29

.... ADDRESSES: The Commission will meet in Washington, DC at the United States Department of Education at 400... Excellence Commission will hold an open meeting in Washington, DC at the United States Department of... DEPARTMENT OF EDUCATION Equity and Excellence Commission AGENCY: Office for Civil Rights, U.S...

75 FR 4822 - 2010 Travel and Relocation Excellence Award

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

... GENERAL SERVICES ADMINISTRATION 2010 Travel and Relocation Excellence Award AGENCY: Office of... Administration (GSA) is seeking candidates for the biennial 2010 Travel and Relocation Excellence Award, which honors excellence in federal travel and relocation policy. FOR FURTHER INFORMATION CONTACT: Go to GSA's...

A Vision of Excellence. The National Search for Excellence Awards in Rehabilitation

ERIC Educational Resources Information Center

J.M. Foundation, New York, NY.

This publication provides information on 1989 winners of the Search for Excellence award for outstanding vocational service programs for people with disabilities. A history and description of the search appears first. A winner and two finalists are described in each of four categories. An introduction to each category discusses typical applicant…

Yield: it's now an entitlement

NASA Astrophysics Data System (ADS)

George, Bill

1994-09-01

Only a few years ago, the primary method of cost reduction and productivity improvement in the semiconductor industry was increasing manufacturing yields throughout the process. Many of the remarkable reliability improvements realized over the past decade have come about as a result of actions that were originally taken primarily to improve device yields. Obviously, the practice of productivity improvement through yield enhancement is limited to the attainment of 100% yield, at which point some other mechanism must be employed. Traditionally, new products have been introduced to manufacturing at a point of relative immaturity, and semiconductor producers have relied on the traditional `learning curve' method of yield improvement to attain profitable levels of manufacturing yield. Recently, results of a survey of several fabs by a group of University of California at Berkeley researchers in the Competitive Semiconductor Manufacturing Program indicate that most factories learn at about the same rate after startup, in terms of both line yield and defectivity. If this is indeed generally true, then the most competitive factor is the one that starts with the highest yield, and it is difficult to displace a leader once his lead has been established. The two observations made above carry enormous implications for the semiconductor development or manufacturing professional. First, one must achieve very high yields in order to even play the game. Second, the achievement of competitive yields over time in the life of a factory is determined even before the factory is opened, in the planning and development phase. Third, and perhaps most uncomfortable for those of us who have relied on yield improvement as a cost driver, the winners of the nineties will find new levers to drive costs down, having already gotten the benefit of very high yield. This paper looks at the question of how the winners will achieve the critical measures of success, high initial yield and utilization

Feminist Rhetorical Practices: In Search of Excellence

ERIC Educational Resources Information Center

Kirsch, Gesa E.; Royster, Jacqueline J.

2010-01-01

In this article, we undertake three critical tasks: First, we delineate major shifts in feminist rhetorical inquiry, thus describing a new and changed landscape of the field. Second, we argue that as feminist rhetorical practices have shifted, so have standards of excellence. To articulate excellence in feminist rhetorical studies, we draw…

An Excel[TM] Model of a Radioactive Series

ERIC Educational Resources Information Center

Andrews, D. G. H.

2009-01-01

A computer model of the decay of a radioactive series, written in Visual Basic in Excel[TM], is presented. The model is based on the random selection of cells in an array. The results compare well with the theoretical equations. The model is a useful tool in teaching this aspect of radioactivity. (Contains 4 figures.)

Source spectral variation and yield estimation for small, near-source explosions

NASA Astrophysics Data System (ADS)

Yoo, S.; Mayeda, K. M.

2012-12-01

Significant S-wave generation is always observed from explosion sources which can lead to difficulty in discriminating explosions from natural earthquakes. While there are numerous S-wave generation mechanisms that are currently the topic of significant research, the mechanisms all remain controversial and appear to be dependent upon the near-source emplacement conditions of that particular explosion. To better understand the generation and partitioning of the P and S waves from explosion sources and to enhance the identification and discrimination capability of explosions, we investigate near-source explosion data sets from the 2008 New England Damage Experiment (NEDE), the Humble-Redwood (HR) series of explosions, and a Massachusetts quarry explosion experiment. We estimate source spectra and characteristic source parameters using moment tensor inversions, direct P and S waves multi-taper analysis, and improved coda spectral analysis using high quality waveform records from explosions from a variety of emplacement conditions (e.g., slow/fast burning explosive, fully tamped, partially tamped, single/ripple-fired, and below/above ground explosions). The results from direct and coda waves are compared to theoretical explosion source model predictions. These well-instrumented experiments provide us with excellent data from which to document the characteristic spectral shape, relative partitioning between P and S-waves, and amplitude/yield dependence as a function of HOB/DOB. The final goal of this study is to populate a comprehensive seismic source reference database for small yield explosions based on the results and to improve nuclear explosion monitoring capability.

Brazilian Soybean Yields and Yield Gaps Vary with Farm Size

NASA Astrophysics Data System (ADS)

Jeffries, G. R.; Cohn, A.; Griffin, T. S.; Bragança, A.

2017-12-01

Understanding the farm size-specific characteristics of crop yields and yield gaps may help to improve yields by enabling better targeting of technical assistance and agricultural development programs. Linking remote sensing-based yield estimates with property boundaries provides a novel view of the relationship between farm size and yield structure (yield magnitude, gaps, and stability over time). A growing literature documents variations in yield gaps, but largely ignores the role of farm size as a factor shaping yield structure. Research on the inverse farm size-productivity relationship (IR) theory - that small farms are more productive than large ones all else equal - has documented that yield magnitude may vary by farm size, but has not considered other yield structure characteristics. We examined farm size - yield structure relationships for soybeans in Brazil for years 2001-2015. Using out-of-sample soybean yield predictions from a statistical model, we documented 1) gaps between the 95th percentile of attained yields and mean yields within counties and individual fields, and 2) yield stability defined as the standard deviation of time-detrended yields at given locations. We found a direct relationship between soy yields and farm size at the national level, while the strength and the sign of the relationship varied by region. Soybean yield gaps were found to be inversely related to farm size metrics, even when yields were only compared to farms of similar size. The relationship between farm size and yield stability was nonlinear, with mid-sized farms having the most stable yields. The work suggests that farm size is an important factor in understanding yield structure and that opportunities for improving soy yields in Brazil are greatest among smaller farms.

Ideal Environment Nurtures Excellence.

ERIC Educational Resources Information Center

Baker, Goerge A.; And Others

1983-01-01

Based on interviews with excellent community college teachers and administrators, examines competencies exhibited by effective teachers (i.e., student-centered orientation, value for the learning process, need to influence behavior, and self-belief) and effective administrators (i.e., accepting resonsibility for effective learning climate,…

Using Microsoft Excel to Generate Usage Statistics

ERIC Educational Resources Information Center

Spellman, Rosemary

2011-01-01

At the Libraries Service Center, statistics are generated on a monthly, quarterly, and yearly basis by using four Microsoft Excel workbooks. These statistics provide information about what materials are being requested and by whom. They also give details about why certain requests may not have been filled. Utilizing Excel allows for a shallower…

Surface modification of strontium-doped porous bioactive ceramic scaffolds via poly(DOPA) coating and immobilizing silk fibroin for excellent angiogenic and osteogenic properties.

PubMed

Wang, Xu; Gu, Zhipeng; Jiang, Bo; Li, Li; Yu, Xixun

2016-04-01

For bioceramic scaffolds employed in clinical applications, excellent bioactivity and tenacity were of great importance. Modifying inorganic SCPP scaffolds with biological macromolecules could obviously improve its bioactivity and eliminate its palpable brittleness. However, it was hard to execute directly due to extremely bad interfacial compatibility between them. In this research, dopamine (DOPA) was introduced onto strontium-doped calcium polyphosphate (SCPP) scaffolds, subsequently the preliminary material was successfully further modified by silk fibroin (SF). SCPP/D/SF possessed suitable biomechanical properties, ability to stimulate angiogenic factor secretion and excellent biocompatibility. Biomechanical examination demonstrated that SCPP/D/SF scaffolds yielded better compressive strength because of improved interfacial compatibility. MTT assay and CLSM observation showed that SCPP/D/SF scaffolds had good cytocompatibility and presented better inducing-cell-migration potential than pure SCPP scaffolds. Meanwhile, its ability to stimulate angiogenic factor secretion was measured through the ELISA assay and immunohistological analysis in vitro and in vivo respectively. The results revealed, superior to SCPP, SCPP/D/SF could effectively promote VEGF and bFGF expression, possibly leading to enhancing angiogenesis and osteogenesis. In a word, SCPP/D/SF could serve as a potential bone tissue engineering scaffold for comparable biomechanical properties and excellent bioactivity. It provided a novel idea for modification of inorganic materials to prepare promising bone tissue engineering scaffolds with the ability to accelerate bone regeneration and vascularization.

Creating a Continuum of Excellence: A U.S. Blue Ribbon Schools of Excellence Conference Proceedings (Coral Gables, Florida, 1999).

ERIC Educational Resources Information Center

Nalley, Donna

These proceedings of the conference "Creating a Continuum of Excellence: A U.S. Blue Ribbon Schools of Excellence Conference," produced by SERVE in collaboration with Nova Southeastern University was held in Coral Gables, Florida, 1999. It lists keynote speakers, action planning meetings, think tanks, and titles of exemplary practice sessions, as…

Results of the Abbott RealTime HIV-1 assay for specimens yielding "target not detected" results by the Cobas AmpliPrep/Cobas TaqMan HIV-1 Test.

PubMed

Babady, N Esther; Germer, Jeffrey J; Yao, Joseph D C

2010-03-01

No significantly discordant results were observed between the Abbott RealTime HIV-1 assay and the COBAS AmpliPrep/COBAS TaqMan HIV-1 Test (CTM) among 1,190 unique clinical plasma specimens obtained from laboratories located in 40 states representing all nine U.S. geographic regions and previously yielding "target not detected" results by CTM.

Simplified combustion noise theory yielding a prediction of fluctuating pressure level

NASA Technical Reports Server (NTRS)

Huff, R. G.

1984-01-01

The first order equations for the conservation of mass and momentum in differential form are combined for an ideal gas to yield a single second order partial differential equation in one dimension and time. Small perturbation analysis is applied. A Fourier transformation is performed that results in a second order, constant coefficient, nonhomogeneous equation. The driving function is taken to be the source of combustion noise. A simplified model describing the energy addition via the combustion process gives the required source information for substitution in the driving function. This enables the particular integral solution of the nonhomogeneous equation to be found. This solution multiplied by the acoustic pressure efficiency predicts the acoustic pressure spectrum measured in turbine engine combustors. The prediction was compared with the overall sound pressure levels measured in a CF6-50 turbofan engine combustor and found to be in excellent agreement.

A Fine Grain, High Mn Steel with Excellent Cryogenic Temperature Properties and Corresponding Constitutive Behaviour

PubMed Central

Wang, Yuhui; Shi, Baodong; He, Yanming; Zhang, Hongwang; Peng, Yan

2018-01-01

A Fe-34.5 wt % Mn-0.04 wt % C ultra-high Mn steel with a fully recrystallised fine-grained structure was produced by cold rolling and subsequent annealing. The steel exhibited excellent cryogenic temperature properties with enhanced work hardening rate, high tensile strength, and high uniform elongation. In order to capture the unique mechanical behaviour, a constitutive model within finite strain plasticity framework based on Hill-type yield function was established with standard Armstrong-Frederick type isotropic hardening. In particular, the evolution of isotropic hardening was determined by the content of martensite; thus, a relationship between model parameters and martensite content is built explicitly. PMID:29414840

Urban-Rural Excellence Gaps: Features, Factors, and Implications

ERIC Educational Resources Information Center

Hernández-Torrano, Daniel

2018-01-01

The purpose of this study was to examine the presence of excellence gaps (i.e., differences between subgroups of students performing at the highest levels of achievement) in a sample of 563 students nominated as gifted by their teachers in urban, semi-urban, and rural settings in Spain. In general, the results suggested the existence of excellence…

Identifying seedling root architectural traits associated with yield and yield components in wheat.

PubMed

Xie, Quan; Fernando, Kurukulasuriya M C; Mayes, Sean; Sparkes, Debbie L

2017-05-01

Plant roots growing underground are critical for soil resource acquisition, anchorage and plant-environment interactions. In wheat ( Triticum aestivum ), however, the target root traits to improve yield potential still remain largely unknown. This study aimed to identify traits of seedling root system architecture (RSA) associated with yield and yield components in 226 recombinant inbred lines (RILs) derived from a cross between the bread wheat Triticum aestivum 'Forno' (small, wide root system) and spelt Triticum spelta 'Oberkulmer' (large, narrow root system). A 'pouch and wick' high-throughput phenotyping pipeline was used to determine the RSA traits of 13-day-old RIL seedlings. Two field experiments and one glasshouse experiment were carried out to investigate the yield, yield components and phenology, followed by identification of quantitative trait loci (QTLs). There was substantial variation in RSA traits between genotypes. Seminal root number and total root length were both positively associated with grains m -2 , grains per spike, above-ground biomass m -2 and grain yield. More seminal roots and longer total root length were also associated with delayed maturity and extended grain filling, likely to be a consequence of more grains being defined before anthesis. Additionally, the maximum width of the root system displayed positive relationships with spikes m -2 , grains m -2 and grain yield. Ten RILs selected for the longest total roots exhibited the same effects on yield and phenology as described above, compared with the ten lines with the shortest total roots. Genetic analysis revealed 38 QTLs for the RSA, and QTL coincidence between the root and yield traits was frequently observed, indicating tightly linked genes or pleiotropy, which concurs with the results of phenotypic correlation analysis. Based on the results from the Forno × Oberkulmer population, it is proposed that vigorous early root growth, particularly more seminal roots and longer total

Yield and economic performance of organic and conventional cotton-based farming systems--results from a field trial in India.

PubMed

Forster, Dionys; Andres, Christian; Verma, Rajeev; Zundel, Christine; Messmer, Monika M; Mäder, Paul

2013-01-01

The debate on the relative benefits of conventional and organic farming systems has in recent time gained significant interest. So far, global agricultural development has focused on increased productivity rather than on a holistic natural resource management for food security. Thus, developing more sustainable farming practices on a large scale is of utmost importance. However, information concerning the performance of farming systems under organic and conventional management in tropical and subtropical regions is scarce. This study presents agronomic and economic data from the conversion phase (2007-2010) of a farming systems comparison trial on a Vertisol soil in Madhya Pradesh, central India. A cotton-soybean-wheat crop rotation under biodynamic, organic and conventional (with and without Bt cotton) management was investigated. We observed a significant yield gap between organic and conventional farming systems in the 1(st) crop cycle (cycle 1: 2007-2008) for cotton (-29%) and wheat (-27%), whereas in the 2(nd) crop cycle (cycle 2: 2009-2010) cotton and wheat yields were similar in all farming systems due to lower yields in the conventional systems. In contrast, organic soybean (a nitrogen fixing leguminous plant) yields were marginally lower than conventional yields (-1% in cycle 1, -11% in cycle 2). Averaged across all crops, conventional farming systems achieved significantly higher gross margins in cycle 1 (+29%), whereas in cycle 2 gross margins in organic farming systems were significantly higher (+25%) due to lower variable production costs but similar yields. Soybean gross margin was significantly higher in the organic system (+11%) across the four harvest years compared to the conventional systems. Our results suggest that organic soybean production is a viable option for smallholder farmers under the prevailing semi-arid conditions in India. Future research needs to elucidate the long-term productivity and profitability, particularly of cotton and

The computerized OMAHA system in microsoft office excel.

PubMed

Lai, Xiaobin; Wong, Frances K Y; Zhang, Peiqiang; Leung, Carenx W Y; Lee, Lai H; Wong, Jessica S Y; Lo, Yim F; Ching, Shirley S Y

2014-01-01

The OMAHA System was adopted as the documentation system in an interventional study. To systematically record client care and facilitate data analysis, two Office Excel files were developed. The first Excel file (File A) was designed to record problems, care procedure, and outcomes for individual clients according to the OMAHA System. It was used by the intervention nurses in the study. The second Excel file (File B) was the summary of all clients that had been automatically extracted from File A. Data in File B can be analyzed directly in Excel or imported in PASW for further analysis. Both files have four parts to record basic information and the three parts of the OMAHA System. The computerized OMAHA System simplified the documentation procedure and facilitated the management and analysis of data.

Organocatalytic sequential α-amination/Corey-Chaykovsky reaction of aldehydes: a high yield synthesis of 4-hydroxypyrazolidine derivatives.

PubMed

Kumar, B Senthil; Venkataramasubramanian, V; Sudalai, Arumugam

2012-05-18

A tandem reaction of in situ generated α-amino aldehydes with dimethyloxosulfonium methylide under Corey-Chaykovsky reaction conditions proceeds efficiently to give 4-hydroxypyrazolidine derivatives in high yields with excellent enantio- and diastereoselectivities. This organocatalytic sequential method provides for the efficient synthesis of anti-1,2-aminoalcohols, structural subunits present in several bioactive molecules as well.

Data-driven reduced order models for effective yield strength and partitioning of strain in multiphase materials

NASA Astrophysics Data System (ADS)

Latypov, Marat I.; Kalidindi, Surya R.

2017-10-01

There is a critical need for the development and verification of practically useful multiscale modeling strategies for simulating the mechanical response of multiphase metallic materials with heterogeneous microstructures. In this contribution, we present data-driven reduced order models for effective yield strength and strain partitioning in such microstructures. These models are built employing the recently developed framework of Materials Knowledge Systems that employ 2-point spatial correlations (or 2-point statistics) for the quantification of the heterostructures and principal component analyses for their low-dimensional representation. The models are calibrated to a large collection of finite element (FE) results obtained for a diverse range of microstructures with various sizes, shapes, and volume fractions of the phases. The performance of the models is evaluated by comparing the predictions of yield strength and strain partitioning in two-phase materials with the corresponding predictions from a classical self-consistent model as well as results of full-field FE simulations. The reduced-order models developed in this work show an excellent combination of accuracy and computational efficiency, and therefore present an important advance towards computationally efficient microstructure-sensitive multiscale modeling frameworks.

Use of dolutegravir in two INI-experienced patients with multiclass resistance resulted in excellent virological and immunological responses

PubMed Central

Marije Hofstra, Laura; Nijhuis, Monique; Mudrikova, Tania; Fun, Axel; Schipper, Pauline; Schneider, Margriet; Wensing, Annemarie

2014-01-01

Introduction Dolutegravir is a second generation integrase inhibitor with a proposed high genetic barrier to resistance. However, in clinical trials, decreased virological response was seen in a subset of patients with prior exposure to raltegravir and multiple integrase resistance mutations. Methods We describe two cases of HIV subtype B-infected patients starting dolutegravir after previous failure on a raltegravir-containing regimen with extensive resistance. Genotypic analysis was performed using population sequencing and 454 ultradeep sequencing of integrase at time of raltegravir exposure. Results Both patients were diagnosed in early 1990s and received mono- and dual therapy, followed by several cART-regimens. Due to presence of extensive resistance, the genotypic susceptibility score of these regimens never reached a score >2 and never resulted in sustained virological suppression despite good adherence. Early 2012, the clinical condition of patient 1 worsened during persistent failure of a mega-cART regimen despite excellent drug levels. Six major PI, six minor PI, seven NRTI, six NNRTI and two INI mutations plus DM-virus were detected (Table 1). Ultra-deep sequencing of integrase showed the selection of Q148R, E138K+Q148K, and N155H variants and phenotypic raltegravir resistance was demonstrated. After addition of dolutegravir and enfuvirtide to the failing regimen (zidovudine, lamivudine, tenofovir, etravirine, darunavir/ritonavir, maraviroc), viral load (VL) decreased from 244,000 to <20 cps/mL within five months, CD4-count increased (33 to 272 mm3) and the clinical condition improved substantially. In patient 2, similar worsening of the clinical condition was observed late 2012 during persistent failure on mega-cART. Five major PI, six minor PI, nine NRTI, seven NNRTI and one INI mutation plus DM-virus were detected. Ultra-deep sequencing showed selection of N155H, followed by Q95K and V151I variants and phenotypic raltegravir resistance was

Carry On-with Excellence.

ERIC Educational Resources Information Center

Thompson, Helen

2002-01-01

Discussion of the expanded role of teacher for library media specialists focuses on characteristics of teaching excellence based on a story about the life of Nathaniel Bowditch. Highlights include lifelong learning; caring about learners; believing everyone can learn; reflecting on teaching methods; understanding human nature; and contributing to…

Excellent Writers, Facile Thinkers

ERIC Educational Resources Information Center

Jacoby, Russell

2007-01-01

In this article, the author discusses the writing style of conservative writers. Here, the author describes conservatism and conservative writers as excellent and facile thinkers. He added that conservatives are best at puncturing liberal, especially academic, balderdash. Apart from that, they uphold a minimal government but maximum government…

Thinly disguised contempt: a barrier to excellence.

PubMed

Brown-Stewart, P

1987-04-01

Many elements in contemporary leadership and management convey contempt for employees. "Thinly disguised contempt," a concept introduced by Peters and Austin in A Passion For Excellence, explains many barriers to the achievement of excellence in corporations across disciplines. Health care executives and managers can learn from the errors of corporate management and avoid replicating these errors in the health care industry.

On the modelling of complex kinematic hardening and nonquadratic anisotropic yield criteria at finite strains: application to sheet metal forming

NASA Astrophysics Data System (ADS)

Grilo, Tiago J.; Vladimirov, Ivaylo N.; Valente, Robertt A. F.; Reese, Stefanie

2016-06-01

In the present paper, a finite strain model for complex combined isotropic-kinematic hardening is presented. It accounts for finite elastic and finite plastic strains and is suitable for any anisotropic yield criterion. In order to model complex cyclic hardening phenomena, the kinematic hardening is described by several back stress components. To that end, a new procedure is proposed in which several multiplicative decompositions of the plastic part of the deformation gradient are considered. The formulation incorporates a completely general format of the yield function, which means that any yield function can by employed by following a procedure that ensures the principle of material frame indifference. The constitutive equations are derived in a thermodynamically consistent way and numerically integrated by means of a backward-Euler algorithm based on the exponential map. The performance of the constitutive model is assessed via numerical simulations of industry-relevant sheet metal forming processes (U-channel forming and draw/re-draw of a panel benchmarks), the results of which are compared to experimental data. The comparison between numerical and experimental results shows that the use of multiple back stress components is very advantageous in the description of springback. This holds in particular if one carries out a comparison with the results of using only one component. Moreover, the numerically obtained results are in excellent agreement with the experimental data.

Chasing Perfection and Catching Excellence in Graduate Medical Education.

PubMed

Andolsek, Kathryn M

2015-09-01

The author reflects on the chapter titled "Preserving Excellence in Residency Training and Medical Care" in Dr. Kenneth Ludmerer's book Let Me Heal: The Opportunity to Preserve Excellence in American Medicine. Rather than assuming that the status quo represents excellence, however, the author asserts that we must make an informed judgment regarding the quality of graduate medical education (GME) by applying an evidence-based approach, carefully measuring performance against specific criteria. But what are the right criteria to judge excellence in GME? The author posits that the first criterion for excellence is the foundational concept identified by the Josiah Macy Jr. Foundation, that of accountability to the public. The author argues that for GME to be truly excellent it must produce a workforce "of sufficient size, specialty mix, and skill" needed to serve the public good. For GME to be truly excellent it must produce the right composition (reflecting the population it serves), use the right pedagogy, and be embedded within the right clinical learning environment. Implementation of competency-based education must be bolder and accelerated. The process of culling out service from education in GME must be more honest, not because all service cannot in some ways be educational but because it is simply too expensive to squander a single minute of time in training. Finally, the epidemic of burnout must be addressed urgently and innovatively.

Chinese College Students' Perceptions of Characteristics of Excellent Teachers

ERIC Educational Resources Information Center

Liu, Shujie; Keeley, Jared; Buskist, William

2015-01-01

We "employed the Teacher Behavior Checklist" (TBC) to investigate Chinese college students' perceptions of excellent teachers' qualities and then compared the results to those from previously collected data from American and Japanese students. Chinese students tended to favor additional structure both in the classroom and in teachers'…

Estimation of rice yield affected by drought and relation between rice yield and TVDI

NASA Astrophysics Data System (ADS)

Hongo, C.; Tamura, E.; Sigit, G.

2016-12-01

Impact of climate change is not only seen on food production but also on food security and sustainable development of society. Adaptation to climate change is a pressing issue throughout the world to reduce the risks along with the plans and strategies for food security and sustainable development. As a key adaptation to the climate change, agricultural insurance is expected to play an important role in stabilizing agricultural production through compensating the losses caused by the climate change. As the adaptation, the Government of Indonesia has launched agricultural insurance program for damage of rice by drought, flood and pest and disease. The Government started a pilot project in 2013 and this year the pilot project has been extended to 22 provinces. Having the above as background, we conducted research on development of new damage assessment method for rice using remote sensing data which could be used for evaluation of damage ratio caused by drought in West Java, Indonesia. For assessment of the damage ratio, estimation of rice yield is a key. As the result of our study, rice yield affected by drought in dry season could be estimated at level of 1 % significance using SPOT 7 data taken in 2015, and the validation result was 0.8t/ha. Then, the decrease ratio in rice yield about each individual paddy field was calculated using data of the estimated result and the average yield of the past 10 years. In addition, TVDI (Temperature Vegetation Dryness Index) which was calculated from Landsat8 data in heading season indicated the dryness in low yield area. The result suggests that rice yield was affected by irrigation water shortage around heading season as a result of the decreased precipitation by El Nino. Through our study, it becomes clear that the utilization of remote sensing data can be promising for assessment of the damage ratio of rice production precisely, quickly and quantitatively, and also it can be incorporated into the insurance procedures.

Cesium hafnium chloride: A high light yield, non-hygroscopic cubic crystal scintillator for gamma spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burger, Arnold, E-mail: aburger@fisk.edu; Department of Physics and Astronomy, Vanderbilt University, Nashville, Tennessee 37235; Rowe, Emmanuel

We report on the scintillation properties of Cs{sub 2}HfCl{sub 6} (cesium hafnium chloride or CHC) as an example of a little-known class of non-hygroscopic compounds having the generic cubic crystal structure of K{sub 2}PtCl{sub 6}. The crystals are easily growable from the melt using the Bridgman method with minimal precursor treatments or purification. CHC scintillation is centered at 400 nm, with a principal decay time of 4.37 μs and a light yield of up to 54 000 photons/MeV when measured using a silicon CCD photodetector. The light yield is the highest ever reported for an undoped crystal, and CHC also exhibits excellent lightmore » yield nonproportionality. These desirable properties allowed us to build and test CHC gamma-ray spectrometers providing energy resolution of 3.3% at 662 keV.« less

Cultivating Excellence: A Curriculum for Excellence in School Administration. V. School-Based Management.

ERIC Educational Resources Information Center

Lawson, John

This report is the fifth in a series on cultivating excellence in education for the purpose of training and retraining school leaders of the 1990s. The role of school administrators, and especially building principals; the characteristic administrative functions; the step-by-step procedures for implementation; and the advantages and possible…

Climate Effects on Corn Yield in Missouri(.

NASA Astrophysics Data System (ADS)

Hu, Qi; Buyanovsky, Gregory

2003-11-01

Understanding climate effects on crop yield has been a continuous endeavor aiming at improving farming technology and management strategy, minimizing negative climate effects, and maximizing positive climate effects on yield. Many studies have examined climate effects on corn yield in different regions of the United States. However, most of those studies used yield and climate records that were shorter than 10 years and were for different years and localities. Although results of those studies showed various influences of climate on corn yield, they could be time specific and have been difficult to use for deriving a comprehensive understanding of climate effects on corn yield. In this study, climate effects on corn yield in central Missouri are examined using unique long-term (1895 1998) datasets of both corn yield and climate. Major results show that the climate effects on corn yield can only be explained by within-season variations in rainfall and temperature and cannot be distinguished by average growing-season conditions. Moreover, the growing-season distributions of rainfall and temperature for high-yield years are characterized by less rainfall and warmer temperature in the planting period, a rapid increase in rainfall, and more rainfall and warmer temperatures during germination and emergence. More rainfall and cooler-than-average temperatures are key features in the anthesis and kernel-filling periods from June through August, followed by less rainfall and warmer temperatures during the September and early October ripening time. Opposite variations in rainfall and temperature in the growing season correspond to low yield. Potential applications of these results in understanding how climate change may affect corn yield in the region also are discussed.

Ruralmicro: Computers and "Excellence" in Small Town New Hampshire.

ERIC Educational Resources Information Center

McDonald, Joseph P.; Thompson, Charles L.

The successful computer program in rural Hillsboro-Deering (New Hampshire) Cooperative School District was the result of a program of excellence in education adopted by a completely new and inexperienced school board in 1978. Supported both by oldtimers and by newcomers, the board acquired new administrators, purged the faculty, and acquired…

[Construction of abridged life table for health evaluation of local resident using Excel program].

PubMed

Chen, Qingsha; Wang, Feng; Li, Xiaozhen; Yang, Jian; Yu, Shouyi; Hu, Jun

2012-05-01

To provide an easy computational tool for evaluating the health condition of local residents. An abridged life table was programmed by applying mathematical functions and formula in Excel program and tested with the real study data to evaluate the results computed. The Excel was capable of computing group death probability of age in the life table ((n)q(x)), number of survivors (l(x)), number of death ((n)d(x)), survival per person-year ((n)L(x)), survival total per person-year (T(x)) and life expectancy (e(x)). The calculated results were consistent with those by SAS. The abridged life table constructed using Microsoft Excel can conveniently and accurately calculate the relevant indices for evaluating the health condition of the residents.

Excellent Beginnings: Evaluation of Phase I (1991-1994).

ERIC Educational Resources Information Center

Brickman, Alan

In 1991 the Plan for Social Excellence, Inc., funded three elementary schools to design and implement a comprehensive early childhood education program. This funding initiative, entitled "Excellent Beginnings," supports programs that include innovative curriculum and classroom-management strategies, extensive parent participation, the use of high…

Yield gaps and yield relationships in US soybean production systems

USDA-ARS?s Scientific Manuscript database

The magnitude of yield gaps (YG) (potential yield – farmer yield) provides some indication of the prospects for increasing crop yield to meet the food demands of future populations. Quantile regression analysis was applied to county soybean [Glycine max (L.) Merrill] yields (1971 – 2011) from Kentuc...

Confirmatory factor analysis using Microsoft Excel.

PubMed

Miles, Jeremy N V

2005-11-01

This article presents a method for using Microsoft (MS) Excel for confirmatory factor analysis (CFA). CFA is often seen as an impenetrable technique, and thus, when it is taught, there is frequently little explanation of the mechanisms or underlying calculations. The aim of this article is to demonstrate that this is not the case; it is relatively straightforward to produce a spreadsheet in MS Excel that can carry out simple CFA. It is possible, with few or no programming skills, to effectively program a CFA analysis and, thus, to gain insight into the workings of the procedure.

Dynamic Modeling of Yield and Particle Size Distribution in Continuous Bayer Precipitation

NASA Astrophysics Data System (ADS)

Stephenson, Jerry L.; Kapraun, Chris

Process engineers at Alcoa's Point Comfort refinery are using a dynamic model of the Bayer precipitation area to evaluate options in operating strategies. The dynamic model, a joint development effort between Point Comfort and the Alcoa Technical Center, predicts process yields, particle size distributions and occluded soda levels for various flowsheet configurations of the precipitation and classification circuit. In addition to rigorous heat, material and particle population balances, the model includes mechanistic kinetic expressions for particle growth and agglomeration and semi-empirical kinetics for nucleation and attrition. The kinetic parameters have been tuned to Point Comfort's operating data, with excellent matches between the model results and plant data. The model is written for the ACSL dynamic simulation program with specifically developed input/output graphical user interfaces to provide a user-friendly tool. Features such as a seed charge controller enhance the model's usefulness for evaluating operating conditions and process control approaches.

77 FR 15089 - Equity and Excellence Commission Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

.... ADDRESSES: The Commission will meet in Washington, DC at the United States Department of Education at 400... Excellence Commission will hold an open meeting in Washington, DC at the United States Department of... DEPARTMENT OF EDUCATION Equity and Excellence Commission Meeting AGENCY: Office for Civil Rights...

Osteochondritis dissecans of the elbow: excellent mid-term follow-up results in teenage athletes treated by arthroscopic debridement and microfracture

PubMed Central

Bojanić, Ivan; Smoljanović, Tomislav; Dokuzović, Stjepan

2012-01-01

Aim To extend the microfracture procedure, which has been proven successful on osteochondritis dissecans (OCD) lesions in the knee and ankle, to OCD lesions in the elbow. Methods Nine young patients were treated by arthroscopic debridement and microfracture by a single surgeon. The average age at operation was 15.0 years (median 15; range 12-19). The average length of the follow-up was 5.3 years (median 5; range 2-9). The follow-up included physical examination and patient interview with elbow function scoring. Success of treatment was determined according to pre-operative and follow-up Mayo Elbow Performance Index scores and the patients’ return to sports. Results Eight patients scored excellent results on the follow-up and 1 scored a good result. Four out of 9 patients were able to increase their training intensity, 2 returned to the same level of activity, 2 changed sports (due to reasons unrelated to the health of their elbow), and 1 left professional sports and started training only recreationally. No patients stopped participating in sports altogether. Conclusions We advocate arthroscopic microfracturing, followed by a strict rehabilitation regime, as a highly effective treatment for OCD of the humeral capitellum. PMID:22351577

Interaction Between Phosphorus and Zinc on the Biomass Yield and Yield Attributes of the Medicinal Plant Stevia (Stevia rebaudiana)

PubMed Central

Das, Kuntal; Dang, Raman; Shivananda, T. N.; Sur, Pintu

2005-01-01

A greenhouse experiment was conducted at the Indian Institute of Horticultural Research (IIHR), Bangalore to study the interaction effect between phosphorus (P) and zinc (Zn) on the yield and yield attributes of the medicinal plant stevia. The results show that the yield and yield attributes have been found to be significantly affected by different treatments. The total yield in terms of biomass production has been increased significantly with the application of Zn and P in different combinations and methods, being highest (23.34 g fresh biomass) in the treatment where Zn was applied as both soil (10 kg ZnSO4/ha) and foliar spray (0.2% ZnSO4). The results also envisaged that the different yield attributes viz. height, total number of branches, and number of leaves per plant have been found to be varied with treatments, being highest in the treatment where Zn was applied as both soil and foliar spray without the application of P. The results further indicated that the yield and yield attributes of stevia have been found to be decreased in the treatment where Zn was applied as both soil and foliar spray along with P suggesting an antagonistic effect between Zn and P. PMID:15915292

Antihyperglycaemic effect of 'Ilogen-Excel', an ayurvedic herbal formulation in streptozotocin-induced diabetes mellitus.

PubMed

Umamaheswari, Selvaraj; Mainzen Prince, Ponnaian Stanely

2007-01-01

'Ilogen-Excel', an Ayurvedic herbal formulation is composed of eight medicinal plants (Curcuma longa, Strychnos potatorum, Salacia oblonga, Tinospora cordifolia, Vetivelia zizanioides, Coscinium fenestratum, Andrographis paniculata and Mimosa pudica). The present study evaluates the antihyperglycemic effect of 'Ilogen-Excel' in streptozotocin induced diabetic rats. Rats were rendered diabetic by streptozotocin (STZ) (45 mg/kg body weight). Oral administration of 'Ilogen-Excel' (50 mg/kg and 100 mg/kg) for 60 days resulted in significantly lowered levels of blood glucose and significantly increased levels of plasma insulin, hepatic glycogen and total hemoglobin. 'Ilogen-Excel' administration also decreased the levels of glycosylated hemoglobin, plasma thiobarbituric acid reactive substances, hydroperoxides, ceruloplasmin and vitamin E in diabetic rats. Plasma reduced glutathione and vitamin C were significantly elevated by oral administration of 'Ilogen-Excel'. Administration of insulin normalized all the biochemical parameters studied in diabetic rats. The effect at a dose of 100 mg/kg was more pronounced than 50 mg/kg and brought back all the parameters to near normal levels. Thus, our study shows the antihyperglycemic effects of 'Ilogen-Excel' in STZ-induced diabetic rats. Our study also shows that combined therapy is better than individual therapy.

Taking It to the Next Level: Components of Excellent Secondary Educators.

ERIC Educational Resources Information Center

Zarra, Ernest J., III

This paper addresses what makes an excellent secondary school teacher, what training should occur for potential secondary school teachers to enable classroom excellence, what characteristics define such excellence, and whether excellence is learned or is the product of a particular predisposition, or both. It begins by explaining how excellent…

0.15 {mu}m InGaAs/AlGaAs/GaAs HEMT production process for high performance and high yield v-band power MMICs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lai, R.; Biedenbender, M.; Lee, J.

1995-12-31

The authors present a unique high yield, high performance 0.15 {mu}m HEMT production process which supports fabrication of MMW power MMICs up to 70 GHz. This process has been transferred successfully from an R&D process to TRW`s GaAs production line. This paper reports the on-wafer test results of more than 1300 V-band MMIC PA circuits measured over 24 wafers. The best 2-stage V-band power MMICs have demonstrated state-of-the-art performance with 9 dB power gain, 20% PAE and 330 mW output power. An excellent RF yield of 60% was achieved with an 8 dB power gain and 250 mW output powermore » specification.« less

Implementation Plan for the NASA Center of Excellence for Structures and Materials

NASA Technical Reports Server (NTRS)

Harris, Charles E. (Editor)

1998-01-01

This report presents the implementation plans of the Center of Excellence (COE) for Structures and Materials. The plan documented herein is the result of an Agencywide planning activity led by the Office of the Center of Excellence for Structures and Materials at Langley Research Center (LaRC). The COE Leadership Team, with a representative from each NASA Field Center, was established to assist LaRC in fulfilling the responsibilities of the COE. The Leadership Team developed the plan presented in this report.

Nut crop yield records show that budbreak-based chilling requirements may not reflect yield decline chill thresholds

NASA Astrophysics Data System (ADS)

Pope, Katherine S.; Dose, Volker; Da Silva, David; Brown, Patrick H.; DeJong, Theodore M.

2015-06-01

Warming winters due to climate change may critically affect temperate tree species. Insufficiently cold winters are thought to result in fewer viable flower buds and the subsequent development of fewer fruits or nuts, decreasing the yield of an orchard or fecundity of a species. The best existing approximation for a threshold of sufficient cold accumulation, the "chilling requirement" of a species or variety, has been quantified by manipulating or modeling the conditions that result in dormant bud breaking. However, the physiological processes that affect budbreak are not the same as those that determine yield. This study sought to test whether budbreak-based chilling thresholds can reasonably approximate the thresholds that affect yield, particularly regarding the potential impacts of climate change on temperate tree crop yields. County-wide yield records for almond ( Prunus dulcis), pistachio ( Pistacia vera), and walnut ( Juglans regia) in the Central Valley of California were compared with 50 years of weather records. Bayesian nonparametric function estimation was used to model yield potentials at varying amounts of chill accumulation. In almonds, average yields occurred when chill accumulation was close to the budbreak-based chilling requirement. However, in the other two crops, pistachios and walnuts, the best previous estimate of the budbreak-based chilling requirements was 19-32 % higher than the chilling accumulations associated with average or above average yields. This research indicates that physiological processes beyond requirements for budbreak should be considered when estimating chill accumulation thresholds of yield decline and potential impacts of climate change.

Changing forest water yields in response to climate warming: results from long-term experimental watershed sites across North America.

PubMed

Creed, Irena F; Spargo, Adam T; Jones, Julia A; Buttle, Jim M; Adams, Mary B; Beall, Fred D; Booth, Eric G; Campbell, John L; Clow, Dave; Elder, Kelly; Green, Mark B; Grimm, Nancy B; Miniat, Chelcy; Ramlal, Patricia; Saha, Amartya; Sebestyen, Stephen; Spittlehouse, Dave; Sterling, Shannon; Williams, Mark W; Winkler, Rita; Yao, Huaxia

2014-10-01

Climate warming is projected to affect forest water yields but the effects are expected to vary. We investigated how forest type and age affect water yield resilience to climate warming. To answer this question, we examined the variability in historical water yields at long-term experimental catchments across Canada and the United States over 5-year cool and warm periods. Using the theoretical framework of the Budyko curve, we calculated the effects of climate warming on the annual partitioning of precipitation (P) into evapotranspiration (ET) and water yield. Deviation (d) was defined as a catchment's change in actual ET divided by P [AET/P; evaporative index (EI)] coincident with a shift from a cool to a warm period - a positive d indicates an upward shift in EI and smaller than expected water yields, and a negative d indicates a downward shift in EI and larger than expected water yields. Elasticity was defined as the ratio of interannual variation in potential ET divided by P (PET/P; dryness index) to interannual variation in the EI - high elasticity indicates low d despite large range in drying index (i.e., resilient water yields), low elasticity indicates high d despite small range in drying index (i.e., nonresilient water yields). Although the data needed to fully evaluate ecosystems based on these metrics are limited, we were able to identify some characteristics of response among forest types. Alpine sites showed the greatest sensitivity to climate warming with any warming leading to increased water yields. Conifer forests included catchments with lowest elasticity and stable to larger water yields. Deciduous forests included catchments with intermediate elasticity and stable to smaller water yields. Mixed coniferous/deciduous forests included catchments with highest elasticity and stable water yields. Forest type appeared to influence the resilience of catchment water yields to climate warming, with conifer and deciduous catchments more susceptible to

Changing forest water yields in response to climate warming: results from long-term experimental watershed sites across North America

PubMed Central

Creed, Irena F; Spargo, Adam T; Jones, Julia A; Buttle, Jim M; Adams, Mary B; Beall, Fred D; Booth, Eric G; Campbell, John L; Clow, Dave; Elder, Kelly; Green, Mark B; Grimm, Nancy B; Miniat, Chelcy; Ramlal, Patricia; Saha, Amartya; Sebestyen, Stephen; Spittlehouse, Dave; Sterling, Shannon; Williams, Mark W; Winkler, Rita; Yao, Huaxia

2014-01-01

Climate warming is projected to affect forest water yields but the effects are expected to vary. We investigated how forest type and age affect water yield resilience to climate warming. To answer this question, we examined the variability in historical water yields at long-term experimental catchments across Canada and the United States over 5-year cool and warm periods. Using the theoretical framework of the Budyko curve, we calculated the effects of climate warming on the annual partitioning of precipitation (P) into evapotranspiration (ET) and water yield. Deviation (d) was defined as a catchment's change in actual ET divided by P [AET/P; evaporative index (EI)] coincident with a shift from a cool to a warm period – a positive d indicates an upward shift in EI and smaller than expected water yields, and a negative d indicates a downward shift in EI and larger than expected water yields. Elasticity was defined as the ratio of interannual variation in potential ET divided by P (PET/P; dryness index) to interannual variation in the EI – high elasticity indicates low d despite large range in drying index (i.e., resilient water yields), low elasticity indicates high d despite small range in drying index (i.e., nonresilient water yields). Although the data needed to fully evaluate ecosystems based on these metrics are limited, we were able to identify some characteristics of response among forest types. Alpine sites showed the greatest sensitivity to climate warming with any warming leading to increased water yields. Conifer forests included catchments with lowest elasticity and stable to larger water yields. Deciduous forests included catchments with intermediate elasticity and stable to smaller water yields. Mixed coniferous/deciduous forests included catchments with highest elasticity and stable water yields. Forest type appeared to influence the resilience of catchment water yields to climate warming, with conifer and deciduous catchments more susceptible to

Use of a business excellence model to improve conservation programs.

PubMed

Black, Simon; Groombridge, Jim

2010-12-01

The current shortfall in effectiveness within conservation biology is illustrated by increasing interest in "evidence-based conservation," whose proponents have identified the need to benchmark conservation initiatives against actions that lead to proven positive effects. The effectiveness of conservation policies, approaches, and evaluation is under increasing scrutiny, and in these areas models of excellence used in business could prove valuable. Typically, conservation programs require years of effort and involve rigorous long-term implementation processes. Successful balance of long-term efforts alongside the achievement of short-term goals is often compromised by management or budgetary constraints, a situation also common in commercial businesses. "Business excellence" is an approach many companies have used over the past 20 years to ensure continued success. Various business excellence evaluations have been promoted that include concepts that could be adapted and applied in conservation programs. We describe a conservation excellence model that shows how scientific processes and results can be aligned with financial and organizational measures of success. We applied the model to two well-documented species conservation programs. In the first, the Po'ouli program, several aspects of improvement were identified, such as more authority for decision making in the field and better integration of habitat management and population recovery processes. The second example, the black-footed ferret program, could have benefited from leadership effort to reduce bureaucracy and to encourage use of best-practice species recovery approaches. The conservation excellence model enables greater clarity in goal setting, more-effective identification of job roles within programs, better links between technical approaches and measures of biological success, and more-effective use of resources. The model could improve evaluation of a conservation program's effectiveness and may be

Recognizing a Centre of Excellence in Ontario's Colleges

ERIC Educational Resources Information Center

Litwin, Jeffrey M.

2012-01-01

The term "Centre of Excellence" is increasingly used by Ontario's colleges with the expectation of portraying a superior level of proficiency, expertise, or investment in a particular academic discipline or program cluster. This paper proposes that the term Centre of Excellence should have a clearer definition so that when one of…

What Excellent Community Colleges Do: Preparing All Students for Success

ERIC Educational Resources Information Center

Wyner, Joshua S.

2014-01-01

In "What Excellent Community Colleges Do," Joshua S. Wyner draws on the insights and evidence gained in administering the inaugural Aspen Prize for Community College Excellence. This book identifies four domains of excellence--degree completion, equity, student learning, and labor market success--and describes in rich detail the policies…

Samuel P. Massie Chair of Excellence In Environmental Disciplines: Hampton University 1994-2010 Year Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adeyiga, Adeyinka A.

2014-12-17

The establishment of the DOE-EM Dr. Samuel P. Massie Chair of Excellence provides an excellent opportunity for Hampton University to be involved in key environmental issues in the 21 st Century. The main areas of focus are on: 1. Coal gasification with respect to pollution prevention and reduction. 2. Solid waste treatment through bioremediation technology and 3. Industrial wastewater treatment Synthesizing ion catalysts suitable for use in slurry bubble column reaction was carried out. Construction of an autoclave continuous stirred tank reactor has been completed. At the initial stage of the development of this program, work was conducted in themore » area of formic acid recovery from waste streams, which yielded useful results. We also succeeded in the removal of priority metal ions such as cadmium, chromium, copper, lead, mercury, nickel, silver, thallium, zinc, etc., from industrial and municipal wastewater by using natural wastes. The process uses tree leaves to adsorb the metal ions in the wastewater. The ultimate goal is to develop inexpensive, highly available, effective metal ion adsorbents from natural wastes as an alternative to existing commercial adsorbents, and also to explain the possible adsorption mechanism that is taking place. This technology uses natural wastes to eliminate other wastes. Obviously, there are several advantages: (1) the negative impact on environment is eliminated, (2) the complicated regeneration step is not needed, and (3) the procedure saves money and energy. Twelve different types of leaves have been tested with lead, zinc, and nickel. The study mechanism showed that the leaf tannin is an active ingredient in the adsorption of metal ions. The ion-exchange mechanism controlled the adsorption process.« less

Overcoming Microsoft Excel's Weaknesses for Crop Model Building and Simulations

ERIC Educational Resources Information Center

Sung, Christopher Teh Boon

2011-01-01

Using spreadsheets such as Microsoft Excel for building crop models and running simulations can be beneficial. Excel is easy to use, powerful, and versatile, and it requires the least proficiency in computer programming compared to other programming platforms. Excel, however, has several weaknesses: it does not directly support loops for iterative…

Excellence and Enjoyment: The Logic of a "Contradiction"

ERIC Educational Resources Information Center

Hartley, David

2006-01-01

In 2004, the Department for Education and Skills in England published its Five Year Strategy for Children and Learners (DfES, 2004). It was preceded by Excellence and Enjoyment: a strategy for primary schools (DfES, 003). "Excellence and enjoyment" seems to constitute an ambiguity, even a contradiction. The government's view is…

Excellence and Enjoyment: The Logic of a "Contradiction"

ERIC Educational Resources Information Center

Hartley, David

2006-01-01

In 2004, the Department for Education and Skills in England published its Five Year Strategy for Children and Learners (DfES, 2004). It was preceded by Excellence and Enjoyment: a strategy for primary schools (DfES, 2003). "Excellence and enjoyment" seems to constitute an ambiguity, even a contradiction. The government's view is…

Yield surface evolution for columnar ice

NASA Astrophysics Data System (ADS)

Zhou, Zhiwei; Ma, Wei; Zhang, Shujuan; Mu, Yanhu; Zhao, Shunpin; Li, Guoyu

A series of triaxial compression tests, which has capable of measuring the volumetric strain of the sample, were conducted on columnar ice. A new testing approach of probing the experimental yield surface was performed from a single sample in order to investigate yield and hardening behaviors of the columnar ice under complex stress states. Based on the characteristic of the volumetric strain, a new method of defined the multiaxial yield strengths of the columnar ice is proposed. The experimental yield surface remains elliptical shape in the stress space of effective stress versus mean stress. The effect of temperature, loading rate and loading path in the initial yield surface and deformation properties of the columnar ice were also studied. Subsequent yield surfaces of the columnar ice have been explored by using uniaxial and hydrostatic paths. The evolution of the subsequent yield surface exhibits significant path-dependent characteristics. The multiaxial hardening law of the columnar ice was established experimentally. A phenomenological yield criterion was presented for multiaxial yield and hardening behaviors of the columnar ice. The comparisons between the theoretical and measured results indicate that this current model is capable of giving a reasonable prediction for the multiaxial yield and post-yield properties of the columnar ice subjected to different temperature, loading rate and path conditions.

Hypothyroidism with scholastic excellence

PubMed Central

Salini, S.; Ramesh, Shanthi; Ramesh, Jagdeep; Vijayasekaran, D.

2015-01-01

A 9-year-old boy had presented with not gaining adequate height with complaints of constipation from 5 years, lethargy and loss of appetite from past 6 months. He was diagnosed to have hypothyroidism with high thyroid antibody levels. Though he was stunted his neurocognition and scholastic performance was excellent as evidenced by his school rank cards. His physical symptoms had improved after thyroxin supplement PMID:26015757

Excellence in Education. Perspectives on Policy and Practice.

ERIC Educational Resources Information Center

Altbach, Philip G., Ed.; And Others

The current reform movement in education is investigated in this book through analysis of the many reports on the state of the nation's schools collectively called the excellence reports. Five areas of investigation are focused upon in this volume: (1) an overview of what the excellence reports say; (2) a consideration of the social, political,…

A Systematic Approach to Achieving High Performance Hybrid Lighting Phosphors with Excellent Thermal- and Photostability

DOE PAGES

Fang, Yang; Liu, Wei; Teat, Simon J.; ...

2016-12-07

We have designed and synthesized a family of high-performance inorganic-organic hybrid phosphor materials composed of extended and robust networks of one-, two- and three-dimensions. Following a bottom-up solution-based synthetic approach, these structures are constructed by connecting highly emissive Cu 4I 4 cubic clusters via carefully selected ligands that form strong Cu-N bonds. They emit intensive yellow-orange light with high luminescence quantum efficiency, coupled with large Stokes shift which greatly reduces self-absorption. They also demonstrate exceptionally high framework- and photo-stability, comparable to those of commercial phosphors. The high stabilities are the result of significantly enhanced Cu-N bonds, as confirmed by themore » DFT binding energy and electron density calculations. Possible emission mechanisms are analyzed based on the results of theoretical calculations and optical experiments. Two-component white phosphors obtained by blending blue and yellow emitters reach an internal quantum yield (IQY) as high as 82% and correlated color temperature (CCT) as low as 2534 K. The performance level of this sub-family exceeds all other types of Cu-I based hybrid systems. The combined advantages make them excellent candidates as alternative rare-earth element (REE) free phosphors for possible use in energy-efficient lighting devices.« less

Examining the roles that changing harvested areas, closing yield-gaps, and increasing yield ceilings have had on crop production

NASA Astrophysics Data System (ADS)

Johnston, M.; Ray, D. K.; Mueller, N. D.; Foley, J. A.

2011-12-01

With an increasing and increasingly affluent population, there has been tremendous effort to examine strategies for sustainably increasing agricultural production to meet this surging global demand. Before developing new solutions from scratch, though, we believe it is important to consult our recent agricultural history to see where and how agricultural production changes have already taken place. By utilizing the newly created temporal M3 cropland datasets, we can for the first time examine gridded agricultural yields and area, both spatially and temporally. This research explores the historical drivers of agricultural production changes, from 1965-2005. The results will be presented spatially at the global-level (5-min resolution), as well as at the individual country-level. The primary research components of this study are presented below, including the general methodology utilized in each phase and preliminary results for soybean where available. The complete assessment will cover maize, wheat, rice, soybean, and sugarcane, and will include country-specific analysis for over 200 countries, states, territories and protectorates. Phase 1: The first component of our research isolates changes in agricultural production due to variation in planting decisions (harvested area) from changes in production due to intensification efforts (yield). We examine area/yield changes at the pixel-level over 5-year time-steps to determine how much each component has contributed to overall changes in production. Our results include both spatial patterns of changes in production, as well as spatial maps illustrating to what degree the production change is attributed to area and/or yield. Together, these maps illustrate where, why, and by how much agricultural production has changed over time. Phase 2: In the second phase of our research we attempt to determine the impact that area and yield changes have had on agricultural production at the country-level. We calculate a production

Promoting Excellence in Nursing Education (PENE): Pross evaluation model.

PubMed

Pross, Elizabeth A

2010-08-01

The purpose of this article is to examine the Promoting Excellence in Nursing Education (PENE) Pross evaluation model. A conceptual evaluation model, such as the one described here, may be useful to nurse academicians in the ongoing evaluation of educational programs, especially those with goals of excellence. Frameworks for evaluating nursing programs are necessary because they offer a way to systematically assess the educational effectiveness of complex nursing programs. This article describes the conceptual framework and its tenets of excellence. Copyright 2009 Elsevier Ltd. All rights reserved.

Design of a new static micromixer having simple structure and excellent mixing performance.

PubMed

Kamio, Eiji; Ono, Tsutomu; Yoshizawa, Hidekazu

2009-06-21

A novel micromixer with simple construction and excellent mixing performance is developed. The micromixer is composed of two stainless steel tubes with different diameters: one is an outer tube and another is an inner tube which fits in the outer tube. In this micromixer, one reactant fluid flows in the mixing zone from the inner tube and the other flows from the outer tube. The excellent mixing performance is confirmed by comparing the results of a Villermaux/Dushman reaction with those for the other micromixers. The developed micromixer has a mixing cascade with multiple means and an asymmetric structure to achieve effective mixing. The excellent mixing performance of the developed micromixer suggests that serial addition of multiple phenomena for mixing will give us an efficient micromixing.

Quantifying potential yield and water-limited yield of summer maize in the North China Plain

NASA Astrophysics Data System (ADS)

Jiang, Mingnuo; Liu, Chaoshun; Chen, Maosi

2017-09-01

The North China Plain is a major food producing region in China, and climate change could pose a threat to food production in the region. Based on China Meteorological Forcing Dataset, simulating the growth of summer maize in North China Plain from 1979 to 2015 with the regional implementation of crop growth model WOFOST. The results showed that the model can reflect the potential yield and water-limited yield of Summer Maize in North China Plain through the calibration and validation of WOFOST model. After the regional implementation of model, combined with the reanalysis data, the model can better reproduce the regional history of summer maize yield in the North China Plain. The yield gap in Southeastern Beijing, southern Tianjin, southern Hebei province, Northwestern Shandong province is significant, these means the water condition is the main factor to summer maize yield in these regions.

Maximum sustainable yield and species extinction in a prey-predator system: some new results.

PubMed

Ghosh, Bapan; Kar, T K

2013-06-01

Though the maximum sustainable yield (MSY) approach has been legally adopted for the management of world fisheries, it does not provide any guarantee against from species extinction in multispecies communities. In the present article, we describe the appropriateness of the MSY policy in a Holling-Tanner prey-predator system with different types of functional responses. It is observed that for both type I and type II functional responses, harvesting of either prey or predator species at the MSY level is a sustainable fishing policy. In the case of combined harvesting, both the species coexist at the maximum sustainable total yield (MSTY) level if the biotic potential of the prey species is greater than a threshold value. Further, increase of the biotic potential beyond the threshold value affects the persistence of the system.

Managing Excellence in Sports Performance.

ERIC Educational Resources Information Center

Lyle, John W. B.

1997-01-01

Conceptualizes excellence in sports performance and suggests that there is a failure to distinguish between community recreation and performance sports as well as lack of knowledge about talent identification. Proposes a structure for management and investment in education and training in the field. (SK)

Yield and yield gaps in central U.S. corn production systems

USDA-ARS?s Scientific Manuscript database

The magnitude of yield gaps (YG) (potential yield – farmer yield) provides some indication of the prospects for increasing crop yield. Quantile regression analysis was applied to county maize (Zea mays L.) yields (1972 – 2011) from Kentucky, Iowa and Nebraska (irrigated) (total of 115 counties) to e...

On Excellence: Craftsmanship and Leadership

ERIC Educational Resources Information Center

Merrill, Chris

2013-01-01

At a presentation from the Maley "Spirit of Excellence" Breakfast in Columbus, OH, March 2013, the author shares comments about craftsmanship and leadership as they relate to technology and engineering education. Students need more experience getting their hands dirty troubleshooting, researching and developing, inventing and innovating,…

Yield and Economic Performance of Organic and Conventional Cotton-Based Farming Systems – Results from a Field Trial in India

PubMed Central

Forster, Dionys; Andres, Christian; Verma, Rajeev; Zundel, Christine; Messmer, Monika M.; Mäder, Paul

2013-01-01

The debate on the relative benefits of conventional and organic farming systems has in recent time gained significant interest. So far, global agricultural development has focused on increased productivity rather than on a holistic natural resource management for food security. Thus, developing more sustainable farming practices on a large scale is of utmost importance. However, information concerning the performance of farming systems under organic and conventional management in tropical and subtropical regions is scarce. This study presents agronomic and economic data from the conversion phase (2007–2010) of a farming systems comparison trial on a Vertisol soil in Madhya Pradesh, central India. A cotton-soybean-wheat crop rotation under biodynamic, organic and conventional (with and without Bt cotton) management was investigated. We observed a significant yield gap between organic and conventional farming systems in the 1st crop cycle (cycle 1: 2007–2008) for cotton (−29%) and wheat (−27%), whereas in the 2nd crop cycle (cycle 2: 2009–2010) cotton and wheat yields were similar in all farming systems due to lower yields in the conventional systems. In contrast, organic soybean (a nitrogen fixing leguminous plant) yields were marginally lower than conventional yields (−1% in cycle 1, −11% in cycle 2). Averaged across all crops, conventional farming systems achieved significantly higher gross margins in cycle 1 (+29%), whereas in cycle 2 gross margins in organic farming systems were significantly higher (+25%) due to lower variable production costs but similar yields. Soybean gross margin was significantly higher in the organic system (+11%) across the four harvest years compared to the conventional systems. Our results suggest that organic soybean production is a viable option for smallholder farmers under the prevailing semi-arid conditions in India. Future research needs to elucidate the long-term productivity and profitability, particularly of

Everyday Excellence: A Framework for Professional Nursing Practice in Long-Term Care

PubMed Central

Lyons, Stacie Salsbury; Specht, Janet Pringle; Karlman, Susan E.

2009-01-01

Registered nurses make measurable contributions to the health and wellness of persons living in nursing homes. However, most nursing homes do not employ adequate numbers of professional nurses with specialized training in the nursing care of older adults to positively impact resident outcomes. As a result, many people never receive excellent geriatric nursing while living in a long-term care facility. Nurses have introduced various professional practice models into health care institutions as tools for leading nursing practice, improving client outcomes, and achieving organizational goals. Problematically, few professional practice models have been implemented in nursing homes. This article introduces an evidence-based framework for professional nursing practice in long-term care. The Everyday Excellence framework is based upon eight guiding principles: Valuing, Envisioning, Peopling, Securing, Learning, Empowering, Leading, and Advancing Excellence. Future research will evaluate the usefulness of this framework for professional nursing practice. PMID:20077966

Ancient science of yogic life for academic excellence in university students.

PubMed

Tikhe, Sham Ganpat; Nagendra, H R; Tripathi, Neeraj

2012-01-01

Academic excellence is essential to provide opportunities for students to work together to improve their understanding of concepts in their academic core. Academic excellence helps students to teach problem-solving and collaborative learning strategies. The objective of this study was to assess Guna (personality traits) in students undergoing Yoga Instructor's Course (YIC). In all, 68 YIC students with a mean age of 28.03 ± 9.38 years participated in this single group pre-post study. The Personality Inventory data were collected before (pre) and after (post) the YIC. Means, standard deviations, Kolmogorov-Smirnov test, and Wilcoxon signed rank test were used for analyzing the data with the help of SPSS 16. The data analysis showed 11.33% decrease (P < 0.01) in Tamas Guna (dull personality trait), 0.68% decrease (P =0.819) in Rajas Guna (violent personality trait), and 10.34% increase (P <0.01) in Sattva Guna (balanced personality trait) scores. This study suggests that YIC can result in the improvement of Sattva Guna (balance personality trait) among students, thus paving the way for their academic excellence.

LICSS - a chemical spreadsheet in microsoft excel

PubMed Central

2012-01-01

Background Representations of chemical datasets in spreadsheet format are important for ready data assimilation and manipulation. In addition to the normal spreadsheet facilities, chemical spreadsheets need to have visualisable chemical structures and data searchable by chemical as well as textual queries. Many such chemical spreadsheet tools are available, some operating in the familiar Microsoft Excel environment. However, within this group, the performance of Excel is often compromised, particularly in terms of the number of compounds which can usefully be stored on a sheet. Summary LICSS is a lightweight chemical spreadsheet within Microsoft Excel for Windows. LICSS stores structures solely as Smiles strings. Chemical operations are carried out by calling Java code modules which use the CDK, JChemPaint and OPSIN libraries to provide cheminformatics functionality. Compounds in sheets or charts may be visualised (individually or en masse), and sheets may be searched by substructure or similarity. All the molecular descriptors available in CDK may be calculated for compounds (in batch or on-the-fly), and various cheminformatic operations such as fingerprint calculation, Sammon mapping, clustering and R group table creation may be carried out. We detail here the features of LICSS and how they are implemented. We also explain the design criteria, particularly in terms of potential corporate use, which led to this particular implementation. Conclusions LICSS is an Excel-based chemical spreadsheet with a difference: • It can usefully be used on sheets containing hundreds of thousands of compounds; it doesn't compromise the normal performance of Microsoft Excel • It is designed to be installed and run in environments in which users do not have admin privileges; installation involves merely file copying, and sharing of LICSS sheets invokes automatic installation • It is free and extensible LICSS is open source software and we hope sufficient detail is provided

Advancing diversity through inclusive excellence in nursing education.

PubMed

Bleich, Michael R; MacWilliams, Brent R; Schmidt, Bonnie J

2015-01-01

Nurse leaders call for a more diverse nursing workforce, but too few address the concept of inclusion as a recruitment and retention strategy or as part of improving the academic learning milieu. This article addresses organizational considerations of diversity and inclusion as part of the agenda established by the Association of American Colleges and Universities for inclusive excellence, building on the idea that academic environments only become excellent when an inclusive climate is reached. Six organizational strategies to inclusion are presented from the authors' experiences, some structural and others behavioral: admissions processes, invisibility, absence of community, promotion and tenure, exclusion, and tokenism. A call for structural and behavioral adaptions within nursing education to advance an inclusive excellence agenda is presented. Copyright © 2015 Elsevier Inc. All rights reserved.

Percutaneous coronary intervention versus coronary artery bypass grafting: where are we after NOBLE and EXCEL?

PubMed

Fortier, Jacqueline H; Shaw, Richard E; Glineur, David; Grau, Juan B

2017-11-01

The publication of the NOBLE and EXCEL trials, with seemingly conflicting results, brought into question whether percutaneous coronary intervention (PCI) or coronary artery bypass grafting (CABG) is better for low-risk patients with left main coronary artery stenosis (LMCAS). This review appraises the methods and results of NOBLE and EXCEL, contextualizes them within the literature, and determines how they may affect clinical practice. We appraised the trials and describe differences in methodology and results. NOBLE recruited primarily isolated LMCAS, and found that CABG was superior to PCI. EXCEL's population included patients LMCAS in the context of multivessel CAD, and found PCI and CABG were comparable. Both trials enrolled young patients with few comorbidities, and there was more protocol-mandated consistency in the procedural techniques and medical therapy of patients receiving PCI. The generalizability of these trials is limited by the use of young, healthy patients at highly skilled centres that rarely reflect typical clinical practice. If these studies are to maintain relevance, trialists must address the lack of protocolization of surgical interventions and inconsistent medical therapies. Unfortunately, the limitations of NOBLE and EXCEL mean that we are no closer to answering the question of what is the optimal treatment for patients with LMCAS.

New Developments in Educational Excellence.

ERIC Educational Resources Information Center

Senese, Donald J.

Since issuance of the report, "A Nation at Risk," the quality and quantity of school/community-business partnerships have grown tremendously. These partnerships already are involved with bringing about and sustaining excellence in education and can become more so. Such relationships can enhance student learning and development and can also reap…

Role modeling excellence in clinical nursing practice.

PubMed

Perry, R N Beth

2009-01-01

Role modeling excellence in clinical nursing practice is the focus of this paper. The phenomenological research study reported involved a group of 8 nurses identified by their colleagues as exemplary. The major theme revealed in this study was that these exemplary nurses were also excellent role models in the clinical setting. This paper details approaches used by these nurses that made them excellent role models. Specifically, the themes of attending to the little things, making connections, maintaining a light-hearted attitude, modeling, and affirming others are presented. These themes are discussed within the framework of Watson [Watson, J., 1989. Human caring and suffering: a subjective model for health services. In: Watson, J., Taylor, R. (Eds.), They Shall Not Hurt: Human Suffering and Human Caring. Colorado University, Boulder, CO] "transpersonal caring" and [Bandura, A., 1997. Social Learning Theory. Prentice Hall, Englewood Cliffs, NJ] "Social Learning Theory." Particular emphasis in the discussion is on how positive role modeling by exemplary practitioners can contribute to the education of clinical nurses in the practice setting.

Centre of Excellence For Simulation Education and Innovation (CESEI).

PubMed

Qayumi, A Karim

2010-01-01

Simulation is becoming an integral part of medical education. The American College of Surgeons (ACS) was the first organization to recognize the value of simulation-based learning, and to award accreditation for educational institutions that aim to provide simulation as part of the experiential learning opportunity. Centre of Excellence for Simulation Education and Innovation (CESEI) is a multidisciplinary and interprofessional educational facility that is based at the University of British Columbia (UBC) and Vancouver Costal Health Authority (VCH). Centre of Excellence for Simulation Education and Innovation's goal is to provide excellence in education, research, and healthcare delivery by providing a technologically advanced environment and learning opportunity using simulation for various groups of learners including undergraduate, postgraduate, nursing, and allied health professionals. This article is an attempt to describe the infrastructure, services, and uniqueness of the Centre of Excellence for Simulation Education and Innovation. Copyright 2010 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Changing forest water yields in response to climate warming: results from long-term experimental watershed sites across North America

Treesearch

Irena F. Creed; Adam T. Spargo; Julia A. Jones; Jim M. Buttle; Mary B. Adams; Fred D. Beall; Eric G. Booth; John L. Campbell; Dave Clow; Kelly Elder; Mark B. Green; Nancy B. Grimm; Chelcy Miniat; Patricia Ramlal; Amartya Saha; Stephen Sebestyen; Dave Spittlehouse; Shannon Sterling; Mark W. Williams; Rita Winkler; Huaxia Yao

2014-01-01

Climate warming is projected to affect forest water yields but the effects are expected to vary.We investigated how forest type and age affect water yield resilience to climate warming. To answer this question, we examined the variability in historical water yields at long-term experimental catchments across Canada and the United States over 5-year cool and warm...

Climatic and technological ceilings for Chinese rice stagnation based on yield gaps and yield trend pattern analysis.

PubMed

Zhang, Tianyi; Yang, Xiaoguang; Wang, Hesong; Li, Yong; Ye, Qing

2014-04-01

Climatic or technological ceilings could cause yield stagnation. Thus, identifying the principal reasons for yield stagnation within the context of the local climate and socio-economic conditions are essential for informing regional agricultural policies. In this study, we identified the climatic and technological ceilings for seven rice-production regions in China based on yield gaps and on a yield trend pattern analysis for the period 1980-2010. The results indicate that 54.9% of the counties sampled experienced yield stagnation since the 1980. The potential yield ceilings in northern and eastern China decreased to a greater extent than in other regions due to the accompanying climate effects of increases in temperature and decreases in radiation. This may be associated with yield stagnation and halt occurring in approximately 49.8-57.0% of the sampled counties in these areas. South-western China exhibited a promising scope for yield improvement, showing the greatest yield gap (30.6%), whereas the yields were stagnant in 58.4% of the sampled counties. This finding suggests that efforts to overcome the technological ceiling must be given priority so that the available exploitable yield gap can be achieved. North-eastern China, however, represents a noteworthy exception. In the north-central area of this region, climate change has increased the yield potential ceiling, and this increase has been accompanied by the most rapid increase in actual yield: 1.02 ton ha(-1) per decade. Therefore, north-eastern China shows a great potential for rice production, which is favoured by the current climate conditions and available technology level. Additional environmentally friendly economic incentives might be considered in this region. © 2013 John Wiley & Sons Ltd.

Delayed Carcass Deboning Results in Significantly Reduced Cook Yields of Boneless Skinless Chicken Thighs

USDA-ARS?s Scientific Manuscript database

Boneless skinless chicken thighs are a new deboned poultry product in the retail market. Three trials were conducted to investigate the effect of postmortem carcass deboning time on the cook yields of boneless skinless chicken thighs as well as boneless skinless chicken breasts. Broiler carcasses ...

SCEW: a Microsoft Excel add-in for easy creation of survival curves.

PubMed

Khan, Haseeb Ahmad

2006-07-01

Survival curves are frequently used for reporting survival or mortality outcomes of experimental pharmacological/toxicological studies and of clinical trials. Microsoft Excel is a simple and widely used tool for creation of numerous types of graphic presentations however it is difficult to create step-wise survival curves in Excel. Considering the familiarity of clinicians and biomedical scientists with Excel, an algorithm survival curves in Excel worksheet (SCEW) has been developed for easy creation of survival curves directly in Excel worksheets. The algorithm has been integrated in the form of Excel add-in for easy installation and usage. The program is based on modification of frequency data for binary break-up using the spreadsheet formula functions whereas a macro subroutine automates the creation of survival curves. The advantages of this program are simple data input, minimal procedural steps and the creation of survival curves in the familiar confines of Excel.

A Dynamic Network Model to Explain the Development of Excellent Human Performance

PubMed Central

Den Hartigh, Ruud J. R.; Van Dijk, Marijn W. G.; Steenbeek, Henderien W.; Van Geert, Paul L. C.

2016-01-01

Across different domains, from sports to science, some individuals accomplish excellent levels of performance. For over 150 years, researchers have debated the roles of specific nature and nurture components to develop excellence. In this article, we argue that the key to excellence does not reside in specific underlying components, but rather in the ongoing interactions among the components. We propose that excellence emerges out of dynamic networks consisting of idiosyncratic mixtures of interacting components such as genetic endowment, motivation, practice, and coaching. Using computer simulations we demonstrate that the dynamic network model accurately predicts typical properties of excellence reported in the literature, such as the idiosyncratic developmental trajectories leading to excellence and the highly skewed distributions of productivity present in virtually any achievement domain. Based on this novel theoretical perspective on excellent human performance, this article concludes by suggesting policy implications and directions for future research. PMID:27148140

Fission yield measurements at IGISOL

NASA Astrophysics Data System (ADS)

Lantz, M.; Al-Adili, A.; Gorelov, D.; Jokinen, A.; Kolhinen, V. S.; Mattera, A.; Moore, I.; Penttilä, H.; Pomp, S.; Prokofiev, A. V.; Rakopoulos, V.; Rinta-Antila, S.; Simutkin, V.; Solders, A.

2016-06-01

The fission product yields are an important characteristic of the fission process. In fundamental physics, knowledge of the yield distributions is needed to better understand the fission process. For nuclear energy applications good knowledge of neutroninduced fission-product yields is important for the safe and efficient operation of nuclear power plants. With the Ion Guide Isotope Separator On-Line (IGISOL) technique, products of nuclear reactions are stopped in a buffer gas and then extracted and separated by mass. Thanks to the high resolving power of the JYFLTRAP Penning trap, at University of Jyväskylä, fission products can be isobarically separated, making it possible to measure relative independent fission yields. In some cases it is even possible to resolve isomeric states from the ground state, permitting measurements of isomeric yield ratios. So far the reactions U(p,f) and Th(p,f) have been studied using the IGISOL-JYFLTRAP facility. Recently, a neutron converter target has been developed utilizing the Be(p,xn) reaction. We here present the IGISOL-technique for fission yield measurements and some of the results from the measurements on proton induced fission. We also present the development of the neutron converter target, the characterization of the neutron field and the first tests with neutron-induced fission.

Measurement of Postmortem Pupil Size: A New Method with Excellent Reliability and Its Application to Pupil Changes in the Early Postmortem Period.

PubMed

Fleischer, Luise; Sehner, Susanne; Gehl, Axel; Riemer, Martin; Raupach, Tobias; Anders, Sven

2017-05-01

Measurement of postmortem pupil width is a potential component of death time estimation. However, no standardized measurement method has been described. We analyzed a total of 71 digital images for pupil-iris ratio using the software ImageJ. Images were analyzed three times by four different examiners. In addition, serial images from 10 cases were taken between 2 and 50 h postmortem to detect spontaneous pupil changes. Intra- and inter-rater reliability of the method was excellent (ICC > 0.95). The method is observer independent and yields consistent results, and images can be digitally stored and re-evaluated. The method seems highly eligible for forensic and scientific purposes. While statistical analysis of spontaneous pupil changes revealed a significant polynomial of quartic degree for postmortem time (p = 0.001), an obvious pattern was not detected. These results do not indicate suitability of spontaneous pupil changes for forensic death time estimation, as formerly suggested. © 2016 American Academy of Forensic Sciences.

Visual Processing in Generally Gifted and Mathematically Excelling Adolescents

ERIC Educational Resources Information Center

Paz-Baruch, Nurit; Leikin, Roza; Leikin, Mark

2016-01-01

Little empirical data are available concerning the cognitive abilities of gifted individuals in general and especially those who excel in mathematics. We examined visual processing abilities distinguishing between general giftedness (G) and excellence in mathematics (EM). The research population consisted of 190 students from four groups of 10th-…

Excellence Gaps in Education: Expanding Opportunities for Talented Students

ERIC Educational Resources Information Center

Plucker, Jonathan A.; Peters, Scott J.

2016-01-01

In "Excellence Gaps in Education," Jonathan A. Plucker and Scott J. Peters shine a spotlight on "excellence gaps"--the achievement gaps among subgroups of students performing at the highest levels of achievement. Much of the focus of recent education reform has been on closing gaps in achievement between students from different…

The Ethics of Research Excellence

ERIC Educational Resources Information Center

Conroy, James C.; Smith, Richard

2017-01-01

We here analyse the ethical dimensions of the UK's "Research Excellence Framework" (REF), the latest (2014) version of an exercise which assesses the quality of university research in the UK every seven or so years. We find many of the common objections to this exercise unfounded, such as that it is excessively expensive by comparison…

Stable CdS QDs with intense broadband photoluminescence and high quantum yields

NASA Astrophysics Data System (ADS)

Mandal, Abhijit; Saha, Jony; De, Goutam

2011-11-01

Aqueous synthesis of CdS quantum dots (QDs) using thiolactic acid (TLA) as a capping agent was reported. These QDs exhibited excellent colloidal and photostability over a span of 2 years and showed intense broadband and almost white photoluminescence suitable for solid state lighting devices. The photoluminescence (PL) property of the aqueous CdS QDs is optimized by adjusting various processing parameters. The highest quantum yield (QY) achieved for TLA capped CdS QDs of average size 3.5 nm was ˜50%. Luminescence lifetime measurements of CdS-TLA QDs indicated longer lifetimes and a larger contribution of the surface-related emission, indicating removal of quenching defects.

Iliac artery angioplasty : technique and results.

PubMed

Brountzos, E N; Kelekis, D A

2004-10-01

Percutaneous angioplasty is widely used for the treatment of iliac artery occlusive disease. Access to the ipsi-lateral, or less commonly contralateral, common femoral artery is obtained under local anaesthesia; the lesion is crossed with a guidewire and dilated with an angioplasty balloon catheter. This technique yields excellent immediate results with very few complications. Stent placement is used in lesions not amenable to balloon angioplasty, in complications, and recurrences. Evidence suggests that balloon angioplasty is the procedure of choice for iliac artery occlusive lesions. Stent placement should be reserved for angioplasty failures. However, primary stent placement is indicated in total occlusions. Lesion morphology is an important determinant of immediate success and long-term patency. TASC lesions type A and B are best treated with angioplasty and stenting, while TASC lesions type C and D show better results with surgical treatment. The development of new stent designs may expand the indications of the percutaneous treatment.

Dimeric spectra analysis in Microsoft Excel: a comparative study.

PubMed

Gilani, A Ghanadzadeh; Moghadam, M; Zakerhamidi, M S

2011-11-01

The purpose of this work is to introduce the reader to an Add-in implementation, Decom. This implementation provides the whole processing requirements for analysis of dimeric spectra. General linear and nonlinear decomposition algorithms were integrated as an Excel Add-in for easy installation and usage. In this work, the results of several samples investigations were compared to those obtained by Datan. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Mountain Gem Russet: A medium to late season potato variety with high early and full season yield potential and excellent fresh market characteristics

USDA-ARS?s Scientific Manuscript database

Mountain Gem Russet is a medium to late maturing variety with both high early and full season yields of oblong-long, medium-russeted tubers having higher protein content than those of standard potato varieties. Mountain Gem Russet has greater resistance to tuber late blight, tuber malformations and ...

Novel pleuromutilin derivatives with excellent antibacterial activity against Staphylococcus aureus.

PubMed

Xu, Peng; Zhang, Yuan-Yuan; Sun, Yong-Xue; Liu, Jian-Hua; Yang, Bing; Wang, Yu-Zhong; Wang, Yu-Liang

2009-06-01

Ten novel pleuromutilin derivatives with thioether moiety and heterocyclic carboxamide or chloroformate group in the side chain were synthesized and confirmed by (1)H NMR, IR and HRMS. The results of the antibacterial activity showed that the title compounds had excellent antibacterial activity against Staphylococcus aureus, among which the MIC of 5f reached 0.03125 microg/mL.

Beyond Standards: Excellence in the High School English Classroom.

ERIC Educational Resources Information Center

Jago, Carol

Each student is capable of achieving excellence, but it requires a nurturing, vigorous classroom environment. To help current and future high school English teachers create and maintain this kind of environment, this book offers concrete ways to reconceive what it means to foster excellent performance in the classroom and vivid examples of student…

Enhancement of broodstock health and maternal immunity in gilthead seabream (Sparus aurata L.) using ExcelMOS®.

PubMed

AbouShabana, N M; AbdelKader, R; Abdel-Rahman, S; Abdel-Gawad, H S; Abdel-Galil, A M

2018-05-22

The current study was conducted to investigate the effect of ExcelMOS® in enhancing the immune system of Sparus aurata broodstock and their impact on offspring health through displaying the maternal transfer of immunity. Broodstock were divided into two groups: one was injected intraperitoneally with ExcelMOS® 1 month before spawning, while the other group was used as a control (without injection). Comprehensive increase in survival rate was observed for larvae hatched from ExcelMOS®-injected broodstock than those of the control (P ≤ 0.05). Hematological analysis showed increases in leukocyte count and hematocrit percentage (P ≤ 0.05) and significant enhancement in immune assays as phagocytic, respiratory burst, lysozyme activities in ExcelMOS®-injected broodstock (P ≤ 0.05). Additionally, total immunoglobulin levels in the serum, eggs, and larvae resulted from ExcelMOS®-injected broodstock were highly significant (P ≤ 0.05) than those in the control ones. Transmission electron microscopy and semi-thin sections in posterior intestine of ExcelMOS®-injected broodstock revealed reinforcement of the epithelial barrier structure, intestinal integrity, and functionality in combination with the stimulation of innate immune system. In conclusion, immunostimulation of Sparus aurata broodstock using ExcelMOS® has improved survival of larvae and enhanced both innate and adaptive immune defense mechanisms. Further investigations are required to show the effect of ExcelMOS® on fish cultured in intensive culture systems.

Escape Excel: A tool for preventing gene symbol and accession conversion errors.

PubMed

Welsh, Eric A; Stewart, Paul A; Kuenzi, Brent M; Eschrich, James A

2017-01-01

Microsoft Excel automatically converts certain gene symbols, database accessions, and other alphanumeric text into dates, scientific notation, and other numerical representations. These conversions lead to subsequent, irreversible, corruption of the imported text. A recent survey of popular genomic literature estimates that one-fifth of all papers with supplementary gene lists suffer from this issue. Here, we present an open-source tool, Escape Excel, which prevents these erroneous conversions by generating an escaped text file that can be safely imported into Excel. Escape Excel is implemented in a variety of formats (http://www.github.com/pstew/escape_excel), including a command line based Perl script, a Windows-only Excel Add-In, an OS X drag-and-drop application, a simple web-server, and as a Galaxy web environment interface. Test server implementations are accessible as a Galaxy interface (http://apostl.moffitt.org) and simple non-Galaxy web server (http://apostl.moffitt.org:8000/). Escape Excel detects and escapes a wide variety of problematic text strings so that they are not erroneously converted into other representations upon importation into Excel. Examples of problematic strings include date-like strings, time-like strings, leading zeroes in front of numbers, and long numeric and alphanumeric identifiers that should not be automatically converted into scientific notation. It is hoped that greater awareness of these potential data corruption issues, together with diligent escaping of text files prior to importation into Excel, will help to reduce the amount of Excel-corrupted data in scientific analyses and publications.

The Roads of "Excellence" in Central and Eastern Europe

ERIC Educational Resources Information Center

Antonowicz, Dominik; Kohoutek, Jan; Pinheiro, Rómulo; Hladchenko, Myroslava

2017-01-01

The aim of the article is to explore the impact of excellence as a powerful policy idea in the context of recent and contemporary developments in three selected Central and Eastern European countries, namely, the Czech Republic, Poland and Ukraine. More specifically, we explore how excellence as a "global script" was translated by policy…

Excel in the Accounting Curriculum: Perceptions from Accounting Professors

ERIC Educational Resources Information Center

Ramachandran Rackliffe, Usha; Ragland, Linda

2016-01-01

Public accounting firms emphasize the importance of accounting graduates being proficient in Excel. Since many accounting graduates often aspire to work in public accounting, a question arises as to whether there should be an emphasis on Excel in accounting education. The purpose of this paper is to specifically look at this issue by examining…

The intrusion of the discourse of economics into the clinical space II: from excellence to outcomes.

PubMed

Plastow, Michael

2010-10-01

There has been a recent dissemination of the term 'excellence' in psychiatric services without a full appreciation of the origins of its contemporary usage. In recent years, we have also been witness to an increasing emphasis on the language and notions of goals and outcomes in clinical practice, particularly in the public sector. This paper examines the origin and prevalence of the term excellence in both commercial and clinical services and the corresponding preoccupation with strategies and outcomes. It is argued that the contemporary talk of 'excellence' has been directly imported from the commercial sector. A closer examination of the ascendency of the use of this term has not been borne out by the results of the companies purported to be 'excellent'. In a similar vein, the political and corporate talk of strategies and outcomes has been transferred onto the clinical field. Such a movement has occurred primarily through political and financial motivations. A model of outcome-driven treatment is examined as an end result of such a preoccupation with outcomes.

A real-time Excel-based scheduling solution for nursing staff reallocation.

PubMed

Tuominen, Outi Anneli; Lundgren-Laine, Heljä; Kauppila, Wiveka; Hupli, Maija; Salanterä, Sanna

2016-09-30

Aim This article describes the development and testing of an Excel-based scheduling solution for the flexible allocation and reallocation of nurses to cover sudden, unplanned absences among permanent nursing staff. Method A quasi-experimental, one group, pre- and post-test study design was used ( Box 1 ) with total sampling. Participants (n=17) were selected purposefully by including all ward managers (n=8) and assistant ward managers (n=9) from one university hospital department. The number of sudden absences among the nursing staff was identified during two 4-week data collection periods (pre- and post-test). Results During the use of the paper-based scheduling system, 121 absences were identified; during the use of the Excel-based system, 106 were identified. The main reasons for the use of flexible 'floating' nurses were sick leave (n=66) and workload (n=31). Other reasons (n=29) included patient transfer to another hospital, scheduling errors and the start or end of employment. Conclusion The Excel-based scheduling solution offered better support in obtaining substitute labour inside the organisation, with smaller employment costs. It also reduced the number of tasks ward managers had to carry out during the process of reallocating staff.

Introgression of wild alleles into the tetraploid peanut crop to improve water use efficiency, earliness and yield.

PubMed

Dutra, Wellison F; Guerra, Yrlânia L; Ramos, Jean P C; Fernandes, Pedro D; Silva, Carliane R C; Bertioli, David J; Leal-Bertioli, Soraya C M; Santos, Roseane C

2018-01-01

The introduction of genes from wild species is a practice little adopted by breeders for the improvement of commercial crops, although it represents an excellent opportunity to enrich the genetic basis and create new cultivars. In peanut, this practice is being increasingly adopted. In this study we present results of introgression of wild alleles from the wild species Arachis duranensis and A. batizocoi improving photosynthetic traits and yield in a set of lines derived from the cross of an induced allotetraploid and cultivated peanut with selection under water stress. The assays were carried out in greenhouse and field focusing on physiological and agronomic traits. A multivariate model (UPGMA) was adopted in order to classify drought tolerant lines. Several lines showed improved levels of tolerance, with values similar to or greater than the tolerant control. Two BC1F6 lines (53 P4 and 96 P9) were highlighted for good drought-related traits, earliness and pod yield, having better phenotypic profile to the drought tolerant elite commercial cultivar BR1. These lines are good candidates for the creation of peanut cultivars suitable for production in semiarid environments.

Do mental skills make champions? Examining the discriminant function of the psychological characteristics of developing excellence questionnaire.

PubMed

Macnamara, Aine; Collins, Dave

2013-01-01

The ability to successfully develop to the highest levels in sport is dependent on a range of variables, not least an individual's ability to cope with the various challenges of development. Psychological Characteristics of Developing Excellence (PCDEs) include both the trait characteristics and the state-deployed skills that have been shown to play a crucial role in the realisation of potential. Psychological characteristics of developing excellence equip aspiring elites with the mental skills, attitudes, and emotions to cope with the challenges of the development pathway, as well as underpinning their capacity to make the most of their innate abilities. The Psychological Characteristics of Developing Excellence Questionnaire (PCDEQ) was designed to assess the possession and deployment of these characteristics. The purpose of this paper was to examine the ability of the Psychological Characteristics of Developing Excellence Questionnaire to effectively discriminate between good and poor developers based on their current possession and deployment of psychological characteristics of developing excellence. Two hundred and eighty-five athletes (n = 192 team athletes; n = 93 individual athletes) completed the Psychological Characteristics of Developing Excellence Questionnaire. Results from the discriminant function analysis suggest that the Psychological Characteristics of Developing Excellence Questionnaire correctly classifies between 67% and 75% of athletes based on their responses. The Psychological Characteristics of Developing Excellence Questionnaire can be used as a formative assessment tool to direct training programmes by identifying weaknesses in psychological characteristics of developing excellence and incorporating specific training to address these weaknesses in advance of developmental challenges.

Effect of warming temperatures on US wheat yields.

PubMed

Tack, Jesse; Barkley, Andrew; Nalley, Lawton Lanier

2015-06-02

Climate change is expected to increase future temperatures, potentially resulting in reduced crop production in many key production regions. Research quantifying the complex relationship between weather variables and wheat yields is rapidly growing, and recent advances have used a variety of model specifications that differ in how temperature data are included in the statistical yield equation. A unique data set that combines Kansas wheat variety field trial outcomes for 1985-2013 with location-specific weather data is used to analyze the effect of weather on wheat yield using regression analysis. Our results indicate that the effect of temperature exposure varies across the September-May growing season. The largest drivers of yield loss are freezing temperatures in the Fall and extreme heat events in the Spring. We also find that the overall effect of warming on yields is negative, even after accounting for the benefits of reduced exposure to freezing temperatures. Our analysis indicates that there exists a tradeoff between average (mean) yield and ability to resist extreme heat across varieties. More-recently released varieties are less able to resist heat than older lines. Our results also indicate that warming effects would be partially offset by increased rainfall in the Spring. Finally, we find that the method used to construct measures of temperature exposure matters for both the predictive performance of the regression model and the forecasted warming impacts on yields.

Defining Primary Care Shortage Areas: Do GIS-based Measures Yield Different Results?

PubMed

Daly, Michael R; Mellor, Jennifer M; Millones, Marco

2018-02-12

To examine whether geographic information systems (GIS)-based physician-to-population ratios (PPRs) yield determinations of geographic primary care shortage areas that differ from those based on bounded-area PPRs like those used in the Health Professional Shortage Area (HPSA) designation process. We used geocoded data on primary care physician (PCP) locations and census block population counts from 1 US state to construct 2 shortage area indicators. The first is a bounded-area shortage indicator defined without GIS methods; the second is a GIS-based measure that measures the populations' spatial proximity to PCP locations. We examined agreement and disagreement between bounded shortage areas and GIS-based shortage areas. Bounded shortage area indicators and GIS-based shortage area indicators agree for the census blocks where the vast majority of our study populations reside. Specifically, 95% and 98% of the populations in our full and urban samples, respectively, reside in census blocks where the 2 indicators agree. Although agreement is generally high in rural areas (ie, 87% of the rural population reside in census blocks where the 2 indicators agree), agreement is significantly lower compared to urban areas. One source of disagreement suggests that bounded-area measures may "overlook" some shortages in rural areas; however, other aspects of the HPSA designation process likely mitigate this concern. Another source of disagreement arises from the border-crossing problem, and it is more prevalent. The GIS-based PPRs we employed would yield shortage area determinations that are similar to those based on bounded-area PPRs defined for Primary Care Service Areas. Disagreement rates were lower than previous studies have found. © 2018 National Rural Health Association.

Genotypic Variation in Yield, Yield Components, Root Morphology and Architecture, in Soybean in Relation to Water and Phosphorus Supply

PubMed Central

He, Jin; Jin, Yi; Du, Yan-Lei; Wang, Tao; Turner, Neil C.; Yang, Ru-Ping; Siddique, Kadambot H. M.; Li, Feng-Min

2017-01-01

Water shortage and low phosphorus (P) availability limit yields in soybean. Roots play important roles in water-limited and P-deficient environment, but the underlying mechanisms are largely unknown. In this study we determined the responses of four soybean [Glycine max (L.) Merr.] genotypes [Huandsedadou (HD), Bailudou (BLD), Jindou 21 (J21), and Zhonghuang 30 (ZH)] to three P levels [applied 0 (P0), 60 (P60), and 120 (P120) mg P kg-1 dry soil to the upper 0.4 m of the soil profile] and two water treatment [well-watered (WW) and water-stressed (WS)] with special reference to root morphology and architecture, we compared yield and its components, root morphology and root architecture to find out which variety and/or what kind of root architecture had high grain yield under P and drought stress. The results showed that water stress and low P, respectively, significantly reduced grain yield by 60 and 40%, daily water use by 66 and 31%, P accumulation by 40 and 80%, and N accumulation by 39 and 65%. The cultivar ZH with the lowest daily water use had the highest grain yield at P60 and P120 under drought. Increased root length was positively associated with N and P accumulation in both the WW and WS treatments, but not with grain yield under water and P deficits. However, in the WS treatment, high adventitious and lateral root densities were associated with high N and P uptake per unit root length which in turn was significantly and positively associated with grain yield. Our results suggest that (1) genetic variation of grain yield, daily water use, P and N accumulation, and root morphology and architecture were observed among the soybean cultivars and ZH had the best yield performance under P and water limited conditions; (2) water has a major influence on nutrient uptake and grain yield, while additional P supply can modestly increase yields under drought in some soybean genotypes; (3) while conserved water use plays an important role in grain yield under drought

Genotypic Variation in Yield, Yield Components, Root Morphology and Architecture, in Soybean in Relation to Water and Phosphorus Supply.

PubMed

He, Jin; Jin, Yi; Du, Yan-Lei; Wang, Tao; Turner, Neil C; Yang, Ru-Ping; Siddique, Kadambot H M; Li, Feng-Min

2017-01-01

Water shortage and low phosphorus (P) availability limit yields in soybean. Roots play important roles in water-limited and P-deficient environment, but the underlying mechanisms are largely unknown. In this study we determined the responses of four soybean [ Glycine max (L.) Merr.] genotypes [Huandsedadou (HD), Bailudou (BLD), Jindou 21 (J21), and Zhonghuang 30 (ZH)] to three P levels [applied 0 (P0), 60 (P60), and 120 (P120) mg P kg -1 dry soil to the upper 0.4 m of the soil profile] and two water treatment [well-watered (WW) and water-stressed (WS)] with special reference to root morphology and architecture, we compared yield and its components, root morphology and root architecture to find out which variety and/or what kind of root architecture had high grain yield under P and drought stress. The results showed that water stress and low P, respectively, significantly reduced grain yield by 60 and 40%, daily water use by 66 and 31%, P accumulation by 40 and 80%, and N accumulation by 39 and 65%. The cultivar ZH with the lowest daily water use had the highest grain yield at P60 and P120 under drought. Increased root length was positively associated with N and P accumulation in both the WW and WS treatments, but not with grain yield under water and P deficits. However, in the WS treatment, high adventitious and lateral root densities were associated with high N and P uptake per unit root length which in turn was significantly and positively associated with grain yield. Our results suggest that (1) genetic variation of grain yield, daily water use, P and N accumulation, and root morphology and architecture were observed among the soybean cultivars and ZH had the best yield performance under P and water limited conditions; (2) water has a major influence on nutrient uptake and grain yield, while additional P supply can modestly increase yields under drought in some soybean genotypes; (3) while conserved water use plays an important role in grain yield under drought

Process gg{yields}h{sub 0}{yields}{gamma}{gamma} in the Lee-Wick standard model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krauss, F.; Underwood, T. E. J.; Zwicky, R.

2008-01-01

The process gg{yields}h{sub 0}{yields}{gamma}{gamma} is studied in the Lee-Wick extension of the standard model (LWSM) proposed by Grinstein, O'Connell, and Wise. In this model, negative norm partners for each SM field are introduced with the aim to cancel quadratic divergences in the Higgs mass. All sectors of the model relevant to gg{yields}h{sub 0}{yields}{gamma}{gamma} are diagonalized and results are commented on from the perspective of both the Lee-Wick and higher-derivative formalisms. Deviations from the SM rate for gg{yields}h{sub 0} are found to be of the order of 15%-5% for Lee-Wick masses in the range 500-1000 GeV. Effects on the rate formore » h{sub 0}{yields}{gamma}{gamma} are smaller, of the order of 5%-1% for Lee-Wick masses in the same range. These comparatively small changes may well provide a means of distinguishing the LWSM from other models such as universal extra dimensions where same-spin partners to standard model fields also appear. Corrections to determinations of Cabibbo-Kobayashi-Maskawa (CKM) elements |V{sub t(b,s,d)}| are also considered and are shown to be positive, allowing the possibility of measuring a CKM element larger than unity, a characteristic signature of the ghostlike nature of the Lee-Wick fields.« less

An Excel tool for deriving key photosynthetic parameters from combined gas exchange and chlorophyll fluorescence: theory and practice.

PubMed

Bellasio, Chandra; Beerling, David J; Griffiths, Howard

2016-06-01

Combined photosynthetic gas exchange and modulated fluorometres are widely used to evaluate physiological characteristics associated with phenotypic and genotypic variation, whether in response to genetic manipulation or resource limitation in natural vegetation or crops. After describing relatively simple experimental procedures, we present the theoretical background to the derivation of photosynthetic parameters, and provide a freely available Excel-based fitting tool (EFT) that will be of use to specialists and non-specialists alike. We use data acquired in concurrent variable fluorescence-gas exchange experiments, where A/Ci and light-response curves have been measured under ambient and low oxygen. From these data, the EFT derives light respiration, initial PSII (photosystem II) photochemical yield, initial quantum yield for CO2 fixation, fraction of incident light harvested by PSII, initial quantum yield for electron transport, electron transport rate, rate of photorespiration, stomatal limitation, Rubisco (ribulose 1·5-bisphosphate carboxylase/oxygenase) rate of carboxylation and oxygenation, Rubisco specificity factor, mesophyll conductance to CO2 diffusion, light and CO2 compensation point, Rubisco apparent Michaelis-Menten constant, and Rubisco CO2 -saturated carboxylation rate. As an example, a complete analysis of gas exchange data on tobacco plants is provided. We also discuss potential measurement problems and pitfalls, and suggest how such empirical data could subsequently be used to parameterize predictive photosynthetic models. © 2015 John Wiley & Sons Ltd.

LICSS - a chemical spreadsheet in microsoft excel.

PubMed

Lawson, Kevin R; Lawson, Jonty

2012-02-02

Representations of chemical datasets in spreadsheet format are important for ready data assimilation and manipulation. In addition to the normal spreadsheet facilities, chemical spreadsheets need to have visualisable chemical structures and data searchable by chemical as well as textual queries. Many such chemical spreadsheet tools are available, some operating in the familiar Microsoft Excel environment. However, within this group, the performance of Excel is often compromised, particularly in terms of the number of compounds which can usefully be stored on a sheet. LICSS is a lightweight chemical spreadsheet within Microsoft Excel for Windows. LICSS stores structures solely as Smiles strings. Chemical operations are carried out by calling Java code modules which use the CDK, JChemPaint and OPSIN libraries to provide cheminformatics functionality. Compounds in sheets or charts may be visualised (individually or en masse), and sheets may be searched by substructure or similarity. All the molecular descriptors available in CDK may be calculated for compounds (in batch or on-the-fly), and various cheminformatic operations such as fingerprint calculation, Sammon mapping, clustering and R group table creation may be carried out.We detail here the features of LICSS and how they are implemented. We also explain the design criteria, particularly in terms of potential corporate use, which led to this particular implementation. LICSS is an Excel-based chemical spreadsheet with a difference:• It can usefully be used on sheets containing hundreds of thousands of compounds; it doesn't compromise the normal performance of Microsoft Excel• It is designed to be installed and run in environments in which users do not have admin privileges; installation involves merely file copying, and sharing of LICSS sheets invokes automatic installation• It is free and extensibleLICSS is open source software and we hope sufficient detail is provided here to enable developers to add their

Atmospheric Fluorescence Yield

NASA Technical Reports Server (NTRS)

Adams, James H., Jr.; Christl, M. J.; Fountain, W. F.; Gregory, J. C.; Martens, K.; Sokolsky, P.; Whitaker, Ann F. (Technical Monitor)

2001-01-01

Several existing and planned experiments estimate the energies of ultra-high energy cosmic rays from air showers using the atmospheric fluorescence from these showers. Accurate knowledge of the conversion from atmospheric fluorescence to energy loss by ionizing particles in the atmosphere is key to this technique. In this paper we discuss a small balloon-borne instrument to make the first in situ measurements versus altitude of the atmospheric fluorescence yield. The instrument can also be used in the lab to investigate the dependence of the fluorescence yield in air on temperature, pressure and the concentrations of other gases that present in the atmosphere. The results can be used to explore environmental effects on and improve the accuracy of cosmic ray energy measurements for existing ground-based experiments and future space-based experiments.

Electron-induced electron yields of uncharged insulating materials

NASA Astrophysics Data System (ADS)

Hoffmann, Ryan Carl

Presented here are electron-induced electron yield measurements from high-resistivity, high-yield materials to support a model for the yield of uncharged insulators. These measurements are made using a low-fluence, pulsed electron beam and charge neutralization to minimize charge accumulation. They show charging induced changes in the total yield, as much as 75%, even for incident electron fluences of <3 fC/mm2, when compared to an uncharged yield. The evolution of the yield as charge accumulates in the material is described in terms of electron recapture, based on the extended Chung and Everhart model of the electron emission spectrum and the dual dynamic layer model for internal charge distribution. This model is used to explain charge-induced total yield modification measured in high-yield ceramics, and to provide a method for determining electron yield of uncharged, highly insulating, high-yield materials. A sequence of materials with progressively greater charge susceptibility is presented. This series starts with low-yield Kapton derivative called CP1, then considers a moderate-yield material, Kapton HN, and ends with a high-yield ceramic, polycrystalline aluminum oxide. Applicability of conductivity (both radiation induced conductivity (RIC) and dark current conductivity) to the yield is addressed. Relevance of these results to spacecraft charging is also discussed.

Gender difference on five-year outcomes of EXCEL biodegradable polymer-coated sirolimus-eluting stents implantation: results from the CREATE study.

PubMed

Zhang, Lei; Qiao, Bing; Han, Ya-Ling; Li, Yi; Xu, Kai; Zhang, Quan-Yu; Yang, Li-Xia; Liu, Hui-Liang; Xu, Bo; Gao, Run-Lin

2013-03-01

The gender difference on long-term outcome in unselected patients after percutaneous coronary intervention (PCI) has not yet been fully investigated. This study aimed to evaluate the gender difference on five-year outcomes following EXCEL biodegradable polymer-coated sirolimus-eluting stenting in patients with coronary disease. A total of 2077 "all comers", consisting of 1528 (73.6%) men and 549 (26.4%) women, who were exclusively treated with EXCEL coronary stents were enrolled in the prospective CREATE study at 59 centers from four countries. After propensity score matching, the baseline characteristics of the two groups were well matched. Recommended antiplatelet regimen was clopidogrel and aspirin for six months followed by chronic aspirin therapy. The primary outcome that was the rate of major adverse cardiac events (MACE), defined as a composite of cardiac mortality, non-fatal myocardial infarction (MI) and target lesion revascularization (TLR), and stent thrombosis (ST) at five years were compared between the two gender groups. In the two groups, women had higher proportions of clinical risk factors, such as being elderly, diabetes mellitus, hypertension and hyperlipidemia, compared to men. Besides, the mean target vessel number per patient was higher and the mean reference vessel diameter smaller for women. Men had higher risks of cardiac death (3.7% vs. 1.6%, P = 0.021) and MACE (8.4% vs. 4.7%, P = 0.004) at five years compared with women. However, the cumulative hazards of non-fatal MI and TLR were similar between men and women. The incidence of Academic Research Consortium (ARC) definite or probable stent thrombosis was similar between the two groups (1.3% vs. 1.0%, P = 0.639). Prolonged clopidogrel therapy (>6 months) did not reduce the cumulative hazards of ST from six months to five years in both men (χ(2) = 0.098, log rank P = 0.754) and women (χ(2) = 2.043, log rank P = 0.153) patients. Women had a lower MACE and cardiac death rate than men after

Maintaining technical excellence requires a national plan

NASA Technical Reports Server (NTRS)

Davidson, T. F.

1991-01-01

To meet the challenge of technical excellence, AIA established a rocket propulsion committee to develop the National Rocket Propulsion Strategic Plan. Developing such a plan required a broad spectrum of experience and disciplines. The Strategic Plan team needed the participation of industry, government, and academia. The plan provides, if followed, a means for the U.S. to maintain technical excellence and world leadership in rocket propulsion. To implement the National Rocket Propulsion Strategic Plan is to invest in the social, economic, and technological futures of America. The plan lays the basis for upgrading existing propulsion systems and a firm base for future full scale development, production, and operation of rocket propulsion systems for space, defense, and commercial applications.

Satellite-based assessment of grassland yields

NASA Astrophysics Data System (ADS)

Grant, K.; Siegmund, R.; Wagner, M.; Hartmann, S.

2015-04-01

Cutting date and frequency are important parameters determining grassland yields in addition to the effects of weather, soil conditions, plant composition and fertilisation. Because accurate and area-wide data of grassland yields are currently not available, cutting frequency can be used to estimate yields. In this project, a method to detect cutting dates via surface changes in radar images is developed. The combination of this method with a grassland yield model will result in more reliable and regional-wide numbers of grassland yields. For the test-phase of the monitoring project, a study area situated southeast of Munich, Germany, was chosen due to its high density of managed grassland. For determining grassland cutting robust amplitude change detection techniques are used evaluating radar amplitude or backscatter statistics before and after the cutting event. CosmoSkyMed and Sentinel-1A data were analysed. All detected cuts were verified according to in-situ measurements recorded in a GIS database. Although the SAR systems had various acquisition geometries, the amount of detected grassland cut was quite similar. Of 154 tested grassland plots, covering in total 436 ha, 116 and 111 cuts were detected using CosmoSkyMed and Sentinel-1A radar data, respectively. Further improvement of radar data processes as well as additional analyses with higher sample number and wider land surface coverage will follow for optimisation of the method and for validation and generalisation of the results of this feasibility study. The automation of this method will than allow for an area-wide and cost efficient cutting date detection service improving grassland yield models.

Excellent response to chemotherapy post immunotherapy

PubMed Central

Dwary, Ashish D.; Master, Samip; Patel, Abhishek; Cole, Constance; Mansour, Richard; Mills, Glenn; Koshy, Nebu; Peddi, Prakash; Burton, Gary; Hammoud, Dalia; Beedupalli, Kavitha

2017-01-01

Introduction Immunotherapy in the form of immune checkpoint inhibitors has changed the landscape of cancer treatment. Newer monoclonal antibodies are coming up and are being tested in various cancers during different stages of treatment. With the increasing use of immune checkpoint inhibitors in the management of various types of cancers, the question is raised as to what next can be offered to a patient who has progressed on this newer treatment. Does Sequence matter? There have been reports of improved responses to chemotherapy after immunotherapy in the form of vaccines. Here we present a case series of 6 patients who progressed on immunotherapy with immune checkpoint inhibitors after initial modality of treatment (chemotherapy/radiation), subsequently received chemotherapy with excellent response. Methods We have a cohort of six patients who had disease progression on second line Immunotherapy for solid or hematological malignancies and had ECOG < 2. All these patients received third line salvage chemotherapy. Three patients had metastatic head and neck cancer, 2 had non-small cell lung cancer (NSCLC), and one had T -cell rich B- cell lymphoma. Prior review and approval were obtained from our institutional review board. Results All patients had an excellent response to chemotherapy in third line setting, after immune checkpoint inhibitors and most of them achieved a complete response. Conclusion Targeting cancer with chemotherapy after failure of immunotherapy is a valid option and can lead to better response rates and PFS which may lead to OS. This effect may be secondary to immunotherapy removing the inhibition exerted by tumor cells or other immune cells initially followed by cytotoxic chemotherapy mediated killing of tumor cells. PMID:29207685

"Trickle-Down" Reform: Hispanics, Higher Education, and the Excellence Movement.

ERIC Educational Resources Information Center

Halcon, John J.; de la Luz Reyes, Maria

1991-01-01

Recent excellence-in-education reform measures have created greater restrictions on the access of Hispanics to higher education. Suggests that reformers expect reform benefits to "trickle down" to minorities after first benefiting mainstream students. The idea of excellence must include that of educational equity. (CJS)

Integrating numerical computation into the undergraduate education physics curriculum using spreadsheet excel

NASA Astrophysics Data System (ADS)

Fauzi, Ahmad

2017-11-01

Numerical computation has many pedagogical advantages: it develops analytical skills and problem-solving skills, helps to learn through visualization, and enhances physics education. Unfortunately, numerical computation is not taught to undergraduate education physics students in Indonesia. Incorporate numerical computation into the undergraduate education physics curriculum presents many challenges. The main challenges are the dense curriculum that makes difficult to put new numerical computation course and most students have no programming experience. In this research, we used case study to review how to integrate numerical computation into undergraduate education physics curriculum. The participants of this research were 54 students of the fourth semester of physics education department. As a result, we concluded that numerical computation could be integrated into undergraduate education physics curriculum using spreadsheet excel combined with another course. The results of this research become complements of the study on how to integrate numerical computation in learning physics using spreadsheet excel.

Care initiation area yields dramatic results.

PubMed

2009-03-01

The ED at Gaston Memorial Hospital in Gastonia, NC, has achieved dramatic results in key department metrics with a Care Initiation Area (CIA) and a physician in triage. Here's how the ED arrived at this winning solution: Leadership was trained in and implemented the Kaizen method, which eliminates redundant or inefficient process steps. Simulation software helped determine additional space needed by analyzing arrival patterns and other key data. After only two days of meetings, new ideas were implemented and tested.

The relationship of learning motivation, achievement and satisfaction for nurses learning simple excel VBA information systems programming.

PubMed

Lee, Ying Li; Chien, Tsai Feng; Kuo, Ming Chuan; Chang, Polun

2014-01-01

This study aims to understand the relationship between participating nurses' motivation, achievement and satisfaction before and after they learned to program in Excel Visual Basic for Applications (Excel VBA). We held a workshop to train nurses in developing simple Excel VBA information systems to support their clinical or administrative practices. Before and after the workshop, the participants were evaluated on their knowledge of Excel VBA, and a questionnaire was given to survey their learning motivation and satisfaction. Statistics softwares Winsteps and SPSS were used for data analysis. Results show that the participants are more knowledgeable about VBA as well as more motivated in learning VBA after the workshop. Participants were highly satisfied with the overall arrangement of the workshop and instructors, but didn't have enough confidence in promoting the application of Excel VBA themselves. In addition, we were unable to predict the participants' achievement by their demographic characteristics or pre-test motivation level.

Plant probiotic bacteria Bacillus and Paraburkholderia improve growth, yield and content of antioxidants in strawberry fruit.

PubMed

Rahman, Mosaddiqur; Sabir, Abdullah As; Mukta, Julakha Akter; Khan, Md Mohibul Alam; Mohi-Ud-Din, Mohammed; Miah, Md Giashuddin; Rahman, Mahfuzur; Islam, M Tofazzal

2018-02-06

Strawberry is an excellent source of natural antioxidants with high capacity of scavenging free radicals. This study evaluated the effects of two plant probiotic bacteria, Bacillus amylolequefaciens BChi1 and Paraburkholderia fungorum BRRh-4 on growth, fruit yield and antioxidant contents in strawberry fruits. Root dipping of seedlings (plug plants) followed by spray applications of both probiotic bacteria in the field on foliage significantly increased fruit yield (up to 48%) over non-treated control. Enhanced fruit yield likely to be linked with higher root and shoot growth, individual and total fruit weight/plant and production of phytohormone by the probiotic bacteria applied on plants. Interestingly, the fruits from plants inoculated with the isolates BChi1 and BRRh-4 had significantly higher contents of phenolics, carotenoids, flavonoids and anthocyanins over non-treated control. Total antioxidant activities were also significantly higher (p < 0.05) in fruits of strawberry plants treated with both probiotic bacteria. To the best of our knowledge, this is the first report of significant improvement of both yield and quality of strawberry fruits by the application of plant probiotic bacteria BChi1 and BRRh-4 in a field condition. Further study is needed to elucidate underlying mechanism of growth and quality improvement of strawberry fruits by probiotic bacteria.

Awarding and promoting excellence in hearing loss prevention

PubMed Central

Meinke, Deanna K.; Morata, Thais C.

2015-01-01

Objective To describe the rationale and creation of a national award to recognize and promote hearing loss prevention. Design In 2007, the National Institute for Occupational Safety and Health partnered with the National Hearing Conservation Association to create the Safe-in-Sound Excellence in Hearing Loss Prevention Award™ (www.safeinsound.us). The objectives of this initiative were to recognize organizations that document measurable achievements and to share leading edge information to a broader community. Results An expert committee developed specific and explicit award evaluation criteria of excellence in hearing loss prevention for organizations in different industrial sectors. The general approach toward award criteria was to incorporate current ‘best practices’ and familiar benchmarks of hearing loss prevention programs. This approach was reviewed publicly. In addition, mechanisms were identified to measure the impact of the award itself. Interest in the award was recorded through the monitoring of the visitor traffic registered by the award web site and is increasing yearly. Specific values and strategies common across award winners are presented. Conclusion The Safe-in-Sound Award™ has obtained high quality field data; identified practical solutions, disseminated successful strategies to minimize the risk of hearing loss, generated new partnerships, and shared practical solutions with others in the field. PMID:22264064

A comparison of clinical and angiographic outcomes after Excel bioabsorbable polymer versus Firebird durable polymer rapamycin-eluting stent for the treatment of coronary artery disease in a "real world" setting: six-month follow-up results.

PubMed

Liu, Hai-bo; Xu, Bo; Qiao, Shu-bin; Yang, Yue-jin; Ma, Wei-hua; Qin, Xue-wen; Yao, Min; Wu, Yong-jian; Yuan, Jin-qing; Chen, Jue; You, Shi-jie; Dai, Jun; Xia, Ran; Li, Jian-jun; Chen, Ji-lin; Gao, Run-lin

2007-04-05

Several clinical trials have shown that rapamycin-eluting stents significantly reduce the risk of restenosis after percutaneous coronary intervention (PCI). The Firebird stent and the Excel stent (coated with bioabsorbable polymer) are two different types of rapamycin-eluting stents made in China, both have been recently approved for clinical use in China by State Food and Drug Administration. However, it is unclear whether there are differences in safety and efficacy between the two types of stents in daily practice. In the month of June 2006, a total of 190 consecutive patients were treated exclusively with Firebird stents (n = 93, Firebird group) or Excel stents (n = 97, Excel group) in our center and were included in this study. The frequency of major adverse cardiac events (MACE, a composite of death, myocardial infarction or target lesion revascularization), binary restenosis, and late lumen loss and stent thrombosis during a six-month follow-up period were compared between the two groups. Patient and lesion characteristics were comparable between the groups. Major adverse cardiac event rates were low in hospital and at 6 months (2.1% in the Excel group and 0% in the Firebird group, P > 0.05). The 6-month angiographic in-stent restenosis rate was 0% in both groups, with an associated late loss of (0.15 +/- 0.21) mm versus (0.14 +/- 0.20) mm (P = 0.858) and the in-segment restenosis rate was also 0% for the Excel group and the Firebird group. There was no definite stent thrombosis identified in either group during the six-month follow-up period and only one patient in the Excel group had probable stent thrombosis in hospital. Results from this mid-term, single-center study showed that both of the Firebird and the Excel rapamycin eluting stent had similar effects on reducing the incidence of MACE and the risk of restenosis (both in-stent and in-segment binary restenosis) after PCI in daily practice.

Excel-Based Tool for Pharmacokinetically Guided Dose Adjustment of Paclitaxel.

PubMed

Kraff, Stefanie; Lindauer, Andreas; Joerger, Markus; Salamone, Salvatore J; Jaehde, Ulrich

2015-12-01

Neutropenia is a frequent and severe adverse event in patients receiving paclitaxel chemotherapy. The time above a paclitaxel threshold concentration of 0.05 μmol/L (Tc > 0.05 μmol/L) is a strong predictor for paclitaxel-associated neutropenia and has been proposed as a target pharmacokinetic (PK) parameter for paclitaxel therapeutic drug monitoring and dose adaptation. Up to now, individual Tc > 0.05 μmol/L values are estimated based on a published PK model of paclitaxel by using the software NONMEM. Because many clinicians are not familiar with the use of NONMEM, an Excel-based dosing tool was developed to allow calculation of paclitaxel Tc > 0.05 μmol/L and give clinicians an easy-to-use tool. Population PK parameters of paclitaxel were taken from a published PK model. An Alglib VBA code was implemented in Excel 2007 to compute differential equations for the paclitaxel PK model. Maximum a posteriori Bayesian estimates of the PK parameters were determined with the Excel Solver using individual drug concentrations. Concentrations from 250 patients were simulated receiving 1 cycle of paclitaxel chemotherapy. Predictions of paclitaxel Tc > 0.05 μmol/L as calculated by the Excel tool were compared with NONMEM, whereby maximum a posteriori Bayesian estimates were obtained using the POSTHOC function. There was a good concordance and comparable predictive performance between Excel and NONMEM regarding predicted paclitaxel plasma concentrations and Tc > 0.05 μmol/L values. Tc > 0.05 μmol/L had a maximum bias of 3% and an error on precision of <12%. The median relative deviation of the estimated Tc > 0.05 μmol/L values between both programs was 1%. The Excel-based tool can estimate the time above a paclitaxel threshold concentration of 0.05 μmol/L with acceptable accuracy and precision. The presented Excel tool allows reliable calculation of paclitaxel Tc > 0.05 μmol/L and thus allows target concentration intervention to improve the benefit-risk ratio of the

The yield and post-yield behavior of high-density polyethylene

NASA Technical Reports Server (NTRS)

Semeliss, M. A.; Wong, R.; Tuttle, M. E.

1990-01-01

An experimental and analytical evaluation was made of the yield and post-yield behavior of high-density polyethylene, a semi-crystalline thermoplastic. Polyethylene was selected for study because it is very inexpensive and readily available in the form of thin-walled tubes. Thin-walled tubular specimens were subjected to axial loads and internal pressures, such that the specimens were subjected to a known biaxial loading. A constant octahederal shear stress rate was imposed during all tests. The measured yield and post-yield behavior was compared with predictions based on both isotropic and anisotropic models. Of particular interest was whether inelastic behavior was sensitive to the hydrostatic stress level. The major achievements and conclusions reached are discussed.

The German Excellence Initiative: Update. Go8 Backgrounder 24a

ERIC Educational Resources Information Center

Frohlich, Ellen

2012-01-01

As described in "Go8 Backgrounder 24: Answering the Global Challenge--Experiences from European Excellence Initiatives," Germany began a debate about how to strengthen its position as an excellent location for science and research in 2004. This debate focussed in particular on the competitiveness of the country's universities and…

Improving the Pedagogy of Capital Structure Theory: An Excel Application

ERIC Educational Resources Information Center

Baltazar, Ramon; Maybee, Bryan; Santos, Michael R.

2012-01-01

This paper uses Excel to enhance the pedagogy of capital structure theory for corporate finance instructors and students. We provide a lesson plan that utilizes Excel spreadsheets and graphs to develop understanding of the theory. The theory is introduced in three scenarios that utilize Modigliani & Miller's Propositions and…

Excel Spreadsheets for Algebra: Improving Mental Modeling for Problem Solving

ERIC Educational Resources Information Center

Engerman, Jason; Rusek, Matthew; Clariana, Roy

2014-01-01

This experiment investigates the effectiveness of Excel spreadsheets in a high school algebra class. Students in the experiment group convincingly outperformed the control group on a post lesson assessment. The student responses, teacher observations involving Excel spreadsheet revealed that it operated as a mindtool, which formed the users'…

Review article: teaching, learning, and the pursuit of excellence in anesthesia education.

PubMed

Wong, Anne

2012-02-01

Excellence in anesthesia education has been advocated to meet the future needs and direction of the specialty. The purpose of this article is twofold: first, to review the current medical education literature and theory in order to inform teaching and learning in anesthesia; and second, to advocate for excellence in anesthesia education. This review considers the general education, educational psychology, and medical education literature based on a search of the MEDLINE and ERIC databases, educational Web sites, and library catalogues. Excellent teaching is considered that which facilitates and maximizes learning. A conceptual framework of learning as a convergence of teacher, learner, assessment, and context is proposed. The contribution of each component to learning is examined in order to enable anesthesia teachers to choose and adapt the most appropriate educational approaches for their particular contexts. The relationship of excellent teaching, scholarly teaching, and the scholarship of teaching is explored. Strategies for promoting excellence in anesthesia education are suggested. The call for excellence in anesthesia has become an important theme, particularly with respect to education. While excellent teaching is a goal to which all anesthesia faculty should aspire, scholarly teaching and scholarship in teaching should also be promoted in order to advance anesthesia education for the benefit of the profession and ultimately for patient care.

An adapted yield criterion for the evolution of subsequent yield surfaces

NASA Astrophysics Data System (ADS)

Küsters, N.; Brosius, A.

2017-09-01

In numerical analysis of sheet metal forming processes, the anisotropic material behaviour is often modelled with isotropic work hardening and an average Lankford coefficient. In contrast, experimental observations show an evolution of the Lankford coefficients, which can be associated with a yield surface change due to kinematic and distortional hardening. Commonly, extensive efforts are carried out to describe these phenomena. In this paper an isotropic material model based on the Yld2000-2d criterion is adapted with an evolving yield exponent in order to change the yield surface shape. The yield exponent is linked to the accumulative plastic strain. This change has the effect of a rotating yield surface normal. As the normal is directly related to the Lankford coefficient, the change can be used to model the evolution of the Lankford coefficient during yielding. The paper will focus on the numerical implementation of the adapted material model for the FE-code LS-Dyna, mpi-version R7.1.2-d. A recently introduced identification scheme [1] is used to obtain the parameters for the evolving yield surface and will be briefly described for the proposed model. The suitability for numerical analysis will be discussed for deep drawing processes in general. Efforts for material characterization and modelling will be compared to other common yield surface descriptions. Besides experimental efforts and achieved accuracy, the potential of flexibility in material models and the risk of ambiguity during identification are of major interest in this paper.

Microsoft Excel Software Usage for Teaching Science and Engineering Curriculum

ERIC Educational Resources Information Center

Singh, Gurmukh; Siddiqui, Khalid

2009-01-01

In this article, our main objective is to present the use of Microsoft Software Excel 2007/2003 for teaching college and university level curriculum in science and engineering. In particular, we discuss two interesting and fascinating examples of interactive applications of Microsoft Excel targeted for undergraduate students in: 1) computational…

Excellence in Television for Young Children--Entertainment, Engagement and Empowerment

ERIC Educational Resources Information Center

Harrison, Cathie

2004-01-01

The notion of excellence in early childhood education is increasingly recognised as both subjective and problematic. The search for excellence can be, however, a motivating force for those committed to providing experiences that enrich and enhance the lives of young children within diverse Australian communities. This commitment is shared by the…

The Teaching and Learning of Chemical Kinetics Supported with MS Excel

ERIC Educational Resources Information Center

Zain, Sharifuddin Md; Rahman, Noorsaadah Abdul; Chin, Lee Sui

2013-01-01

Students in 12 secondary schools in three states of Malaysia were taught to use worksheets on the chemical kinetics topic which had been pre-created using the MS Excel worksheets. After the teaching, an opinion survey of 612 Form Six students from these schools was conducted. The results showed that almost all the students felt that MS Excel…

Be(com)ing an Excellent Student: A Qualitative Study with Engineering Undergraduates

ERIC Educational Resources Information Center

Monteiro, Sílvia; Almeida, Leandro S.; Vasconcelos, Rosa M.; Cruz, José Fernando A.

2014-01-01

This study explores the factors affecting the development of academic excellence on a group of 33 high-achieving engineering students. Participants were interviewed individually to explore several personal and contextual aspects of their past and current academic pathways. The results obtained reflect three main contributions to the…

Centers of Excellence: A Catalogue

NASA Technical Reports Server (NTRS)

Phelps, Paul B. (Compiler)

1988-01-01

This report summarizes information on State-sponsored 'Centers of Excellence' gathered during a survey of State programs in the Fall of 1987. For the purposes of this catalog, 'Centers of Excellence' refers to organizations or activities with the following characteristics: institutionalized, focused, cooperative Research and Development (R&D) programs; supported in part by State governments, in addition to universities, industry and (in some cases) Federal agencies; performed by teams that may include both industry and university employees; and concentrated on relatively specific R&D agendas, usually with near term commercial or governmental applicability. Most of these activities involve state-of-the-art advancement of new technologies under conditions leading to early practical applications. Not included in this catalog are project-level matching grant programs. The principal purpose of this catalog is to help NASA program management, at all levels. to identify and where appropriate, to initiate relationships with other technology-developing organizations. These State-sponsored programs should be of particular interest, because: they present an opportunity to leverage NASA's R&D investments; they are concentrated at the frontier, yet have a concern for practical applications; and they involve industrial participation under conditions that increase the probability of prompt, widespread dissemination in the form of new or enhanced commercial products, processes, or services.

Implementing Service Excellence in Higher Education

ERIC Educational Resources Information Center

Khan, Hina; Matlay, Harry

2009-01-01

Purpose: The purpose of this paper is to provide a critical analysis of the importance of service excellence in higher education. Design/methodology/approach: The research upon which this paper is based employed a phenomenological approach. This method was selected for its focus on respondent perceptions and experiences. Both structured and…

Curriculum for Excellence and Interdisciplinary Learning

ERIC Educational Resources Information Center

Humes, Walter

2013-01-01

This paper examines the recommendations contained in Curriculum for Excellence (CfE) aimed at encouraging the integration of knowledge, skills and understanding across different areas of the curriculum. It first outlines what is said in the official CfE documentation and supporting materials produced by Education Scotland, noting the absence of…

Exploring Middle School Students' and Parents' Conceptions of Excellent Teaching

ERIC Educational Resources Information Center

Chen, Junjun

2016-01-01

While there have been many western studies about what excellent teaching means, there are far fewer eastern studies. This study explored how students and parents perceived conceptions of excellent teaching in Chinese middle schools. The 77 students' and 67 parents' responses relating to a personal narrative of a time they had experienced excellent…

Study of the strong {sigma}{sub c}{yields}{lambda}{sub c}{pi},{sigma}{sub c}*{yields}{lambda}{sub c}{pi} and {xi}{sub c}*{yields}{xi}{sub c}{pi} decays in a nonrelativistic quark model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Albertus, C.; Nieves, J.; Hernandez, E.

We present results for the strong widths corresponding to the {sigma}{sub c}{yields}{lambda}{sub c}{pi}, {sigma}{sub c}*{yields}{lambda}{sub c}{pi} and {xi}{sub c}*{yields}{xi}{sub c}{pi} decays. The calculations have been done in a nonrelativistic constituent quark model with wave functions that take advantage of the constraints imposed by heavy quark symmetry. Partial conservation of axial current hypothesis allows us to determine the strong vertices from an analysis of the axial current matrix elements. Our results {gamma}({sigma}{sub c}{sup ++}{yields}{lambda}{sub c}{sup +}{pi}{sup +})=2.41{+-}0.07{+-}0.02 MeV, {gamma}({sigma}{sub c}{sup +}{yields}{lambda}{sub c}{sup +}{pi}{sup 0})=2.79{+-}0.08{+-}0.02 MeV, {gamma}({sigma}{sub c}{sup 0}{yields}{lambda}{sub c}{sup +}{pi}{sup -})=2.37{+-}0.07{+-}0.02 MeV, {gamma}({sigma}{sub c}*{sup ++}{yields}{lambda}{sub c}{sup +}{pi}{sup +})=17.52{+-}0.74{+-}0.12 MeV, {gamma}({sigma}{sub c}*{supmore » +}{yields}{lambda}{sub c}{sup +}{pi}{sup 0})=17.31{+-}0.73{+-}0.12 MeV, {gamma}({sigma}{sub c}*{sup 0}{yields}{lambda}{sub c}{sup +}{pi}{sup -})=16.90{+-}0.71{+-}0.12 MeV, {gamma}({xi}{sub c}*{sup +}{yields}{xi}{sub c}{sup 0}{pi}{sup +}+{xi}{sub c}{sup +}{pi}{sup 0})=3.18{+-}0.10{+-}0.01 MeV, and {gamma}({xi}{sub c}*{sup 0}{yields}{xi}{sub c}{sup +}{pi}{sup -}+{xi}{sub c}{sup 0}{pi}{sup 0})=3.03{+-}0.10{+-}0.01 MeV are in good agreement with experimental determinations.« less

Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

NASA Technical Reports Server (NTRS)

Nanzetta, Philip

1992-01-01

The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

Tapping Into Water: Key Considerations for Achieving Excellence in School Drinking Water Access

PubMed Central

Hecht, Kenneth; Hampton, Karla E.; Grumbach, Jacob M.; Braff-Guajardo, Ellen; Brindis, Claire D.

2014-01-01

Objectives. We examined free drinking water access in schools. Methods. We conducted cross-sectional interviews with administrators from 240 California public schools from May to November 2011 to examine the proportion of schools that met excellent water access criteria (i.e., location, density, type, maintenance, and appeal of water sources), school-level characteristics associated with excellent water access, and barriers to improvements. Results. No schools met all criteria for excellent water access. High schools and middle schools had lower fountain:student ratios than elementary schools (odds ratio [OR] = 0.06; 95% confidence interval [CI] = 0.02, 0.20; OR = 0.30, 95% CI = 0.12, 0.70). Rural schools were more likely to offer a nonfountain water source than city schools (OR = 5.0; 95% CI = 1.74, 14.70). Newer schools were more likely to maintain water sources than older schools (OR = 0.98; 95% CI = 0.97, 1.00). Schools that offered free water in food service areas increased from pre- to postimplementation of California’s school water policy (72%–83%; P < .048). Barriers to improving school water included cost of programs and other pressing concerns. Conclusions. Awareness of the benefits related to school drinking water provision and funding may help communities achieve excellence in drinking water access. PMID:24832141

Quantifying yield gaps in wheat production in Russia

NASA Astrophysics Data System (ADS)

Schierhorn, Florian; Faramarzi, Monireh; Prishchepov, Alexander V.; Koch, Friedrich J.; Müller, Daniel

2014-08-01

Crop yields must increase substantially to meet the increasing demands for agricultural products. Crop yield increases are particularly important for Russia because low crop yields prevail across Russia’s widespread and fertile land resources. However, reliable data are lacking regarding the spatial distribution of potential yields in Russia, which can be used to determine yield gaps. We used a crop growth model to determine the yield potentials and yield gaps of winter and spring wheat at the provincial level across European Russia. We modeled the annual yield potentials from 1995 to 2006 with optimal nitrogen supplies for both rainfed and irrigated conditions. Overall, the results suggest yield gaps of 1.51-2.10 t ha-1, or 44-52% of the yield potential under rainfed conditions. Under irrigated conditions, yield gaps of 3.14-3.30 t ha-1, or 62-63% of the yield potential, were observed. However, recurring droughts cause large fluctuations in yield potentials under rainfed conditions, even when the nitrogen supply is optimal, particularly in the highly fertile black soil areas of southern European Russia. The highest yield gaps (up to 4 t ha-1) under irrigated conditions were detected in the steppe areas in southeastern European Russia along the border of Kazakhstan. Improving the nutrient and water supply and using crop breeds that are adapted to the frequent drought conditions are important for reducing yield gaps in European Russia. Our regional assessment helps inform policy and agricultural investors and prioritize research that aims to increase crop production in this important region for global agricultural markets.

77 FR 25861 - Establishing Principles of Excellence for Educational Institutions Serving Service Members...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-02

... Establishing Principles of Excellence for Educational Institutions Serving Service Members, Veterans, Spouses... Administration to develop Principles of Excellence to strengthen oversight, enforcement, and accountability within these benefits programs. Sec. 2. Principles of Excellence for Educational Institutions Serving...

Benefits of seasonal forecasts of crop yields

NASA Astrophysics Data System (ADS)

Sakurai, G.; Okada, M.; Nishimori, M.; Yokozawa, M.

2017-12-01

Major factors behind recent fluctuations in food prices include increased biofuel production and oil price fluctuations. In addition, several extreme climate events that reduced worldwide food production coincided with upward spikes in food prices. The stabilization of crop yields is one of the most important tasks to stabilize food prices and thereby enhance food security. Recent development of technologies related to crop modeling and seasonal weather forecasting has made it possible to forecast future crop yields for maize and soybean. However, the effective use of these technologies remains limited. Here we present the potential benefits of seasonal crop-yield forecasts on a global scale for choice of planting day. For this purpose, we used a model (PRYSBI-2) that can well replicate past crop yields both for maize and soybean. This model system uses a Bayesian statistical approach to estimate the parameters of a basic process-based model of crop growth. The spatial variability of model parameters was considered by estimating the posterior distribution of the parameters from historical yield data by using the Markov-chain Monte Carlo (MCMC) method with a resolution of 1.125° × 1.125°. The posterior distributions of model parameters were estimated for each spatial grid with 30 000 MCMC steps of 10 chains each. By using this model and the estimated parameter distributions, we were able to estimate not only crop yield but also levels of associated uncertainty. We found that the global average crop yield increased about 30% as the result of the optimal selection of planting day and that the seasonal forecast of crop yield had a large benefit in and near the eastern part of Brazil and India for maize and the northern area of China for soybean. In these countries, the effects of El Niño and Indian Ocean dipole are large. The results highlight the importance of developing a system to forecast global crop yields.

George M. Low Trophy: NASA's quality and excellence award

NASA Technical Reports Server (NTRS)

1991-01-01

NASA's major goal is the preservation of America's position as a leader in the aerospace industry. To maintain that status, it is crucial that the products and services we depend upon from NASA contractors, subcontractors, and suppliers meet the highest quality standards to ensure the space program's success. The George M. Low Trophy: NASA's Quality and Excellence Award is the result of NASA's desire to encourage continuous improvement and Total Quality Management (TQM) in the aerospace industry and is awarded to members of NASA's contractor community that have demonstrated sustained excellence, customer orientation, and outstanding achievements in a Total Quality Management (TQM) environment. The purpose in presenting this award is to increase public awareness of the importance of quality and productivity to the nation's aerospace industry and the nation's leadership position overall; encourage domestic business to continuously pursue efforts that enhance quality and increase productivity which will strengthen the nation's competitiveness in the international arena; and provide a forum for sharing the successful techniques and strategies used by applicants with other American organizations. Awards to Rockwell International and Marotta Scientific Controls, Inc. are announced and discussed.

SNP_tools: A compact tool package for analysis and conversion of genotype data for MS-Excel

PubMed Central

Chen, Bowang; Wilkening, Stefan; Drechsel, Marion; Hemminki, Kari

2009-01-01

Background Single nucleotide polymorphism (SNP) genotyping is a major activity in biomedical research. Scientists prefer to have a facile access to the results which may require conversions between data formats. First hand SNP data is often entered in or saved in the MS-Excel format, but this software lacks genetic and epidemiological related functions. A general tool to do basic genetic and epidemiological analysis and data conversion for MS-Excel is needed. Findings The SNP_tools package is prepared as an add-in for MS-Excel. The code is written in Visual Basic for Application, embedded in the Microsoft Office package. This add-in is an easy to use tool for users with basic computer knowledge (and requirements for basic statistical analysis). Conclusion Our implementation for Microsoft Excel 2000-2007 in Microsoft Windows 2000, XP, Vista and Windows 7 beta can handle files in different formats and converts them into other formats. It is a free software. PMID:19852806

SNP_tools: A compact tool package for analysis and conversion of genotype data for MS-Excel.

PubMed

Chen, Bowang; Wilkening, Stefan; Drechsel, Marion; Hemminki, Kari

2009-10-23

Single nucleotide polymorphism (SNP) genotyping is a major activity in biomedical research. Scientists prefer to have a facile access to the results which may require conversions between data formats. First hand SNP data is often entered in or saved in the MS-Excel format, but this software lacks genetic and epidemiological related functions. A general tool to do basic genetic and epidemiological analysis and data conversion for MS-Excel is needed. The SNP_tools package is prepared as an add-in for MS-Excel. The code is written in Visual Basic for Application, embedded in the Microsoft Office package. This add-in is an easy to use tool for users with basic computer knowledge (and requirements for basic statistical analysis). Our implementation for Microsoft Excel 2000-2007 in Microsoft Windows 2000, XP, Vista and Windows 7 beta can handle files in different formats and converts them into other formats. It is a free software.

Automating Partial Period Bond Valuation with Excel's Day Counting Functions

ERIC Educational Resources Information Center

Vicknair, David; Spruell, James

2009-01-01

An Excel model for calculating the actual price of bonds under a 30 day/month, 360 day/year day counting assumption by nesting the DAYS360 function within the PV function is developed. When programmed into an Excel spreadsheet, the model can accommodate annual and semiannual payment bonds sold on or between interest dates using six fundamental…

Creating Single-Subject Design Graphs in Microsoft Excel[TM] 2007

ERIC Educational Resources Information Center

Dixon, Mark R.; Jackson, James W.; Small, Stacey L.; Horner-King, Mollie J.; Mui Ker Lik, Nicholas; Garcia, Yors; Rosales, Rocio

2009-01-01

Over 10 years have passed since the publication of Carr and Burkholder's (1998) technical article on how to construct single-subject graphs using Microsoft Excel. Over the course of the past decade, the Excel program has undergone a series of revisions that make the Carr and Burkholder paper somewhat difficult to follow with newer versions. The…

Regional crop yield forecasting: a probabilistic approach

NASA Astrophysics Data System (ADS)

de Wit, A.; van Diepen, K.; Boogaard, H.

2009-04-01

Information on the outlook on yield and production of crops over large regions is essential for government services dealing with import and export of food crops, for agencies with a role in food relief, for international organizations with a mandate in monitoring the world food production and trade, and for commodity traders. Process-based mechanistic crop models are an important tool for providing such information, because they can integrate the effect of crop management, weather and soil on crop growth. When properly integrated in a yield forecasting system, the aggregated model output can be used to predict crop yield and production at regional, national and continental scales. Nevertheless, given the scales at which these models operate, the results are subject to large uncertainties due to poorly known weather conditions and crop management. Current yield forecasting systems are generally deterministic in nature and provide no information about the uncertainty bounds on their output. To improve on this situation we present an ensemble-based approach where uncertainty bounds can be derived from the dispersion of results in the ensemble. The probabilistic information provided by this ensemble-based system can be used to quantify uncertainties (risk) on regional crop yield forecasts and can therefore be an important support to quantitative risk analysis in a decision making process.

Random Forests for Global and Regional Crop Yield Predictions.

PubMed

Jeong, Jig Han; Resop, Jonathan P; Mueller, Nathaniel D; Fleisher, David H; Yun, Kyungdahm; Butler, Ethan E; Timlin, Dennis J; Shim, Kyo-Moon; Gerber, James S; Reddy, Vangimalla R; Kim, Soo-Hyung

2016-01-01

Accurate predictions of crop yield are critical for developing effective agricultural and food policies at the regional and global scales. We evaluated a machine-learning method, Random Forests (RF), for its ability to predict crop yield responses to climate and biophysical variables at global and regional scales in wheat, maize, and potato in comparison with multiple linear regressions (MLR) serving as a benchmark. We used crop yield data from various sources and regions for model training and testing: 1) gridded global wheat grain yield, 2) maize grain yield from US counties over thirty years, and 3) potato tuber and maize silage yield from the northeastern seaboard region. RF was found highly capable of predicting crop yields and outperformed MLR benchmarks in all performance statistics that were compared. For example, the root mean square errors (RMSE) ranged between 6 and 14% of the average observed yield with RF models in all test cases whereas these values ranged from 14% to 49% for MLR models. Our results show that RF is an effective and versatile machine-learning method for crop yield predictions at regional and global scales for its high accuracy and precision, ease of use, and utility in data analysis. RF may result in a loss of accuracy when predicting the extreme ends or responses beyond the boundaries of the training data.

Yield Advances in Peanut

USDA-ARS?s Scientific Manuscript database

Average yields of peanut in the U.S. set an all time record of 4,695 kg ha-1 in 2012. This far exceeded the previous record yield of 3,837 kg ha-1 in 2008. Favorable weather conditions undoubtedly contributed to the record yields in 2012; however, these record yields would not have been achievable...

Excel Yourself with Personalised Email Messages

ERIC Educational Resources Information Center

McClean, Stephen

2008-01-01

Combining the Excel spreadsheet with an email program provides a very powerful tool for sending students personalised emails. Most email clients now support a Mail Merge facility whereby a generic template is created and information unique to each student record in the spreadsheet is filled into that template, generating tens if not hundreds of…

Philanthropic Donor Perspectives on Supporting Nursing Excellence in a Community Hospital.

PubMed

Fickley, Sharon K; Mishler, Ray R; Black, Amelia S; DeGuzman, Pam B

2016-11-01

The purpose of this research is to explore donors' perspectives on support of nursing excellence in a community hospital. Philanthropic support is rapidly becoming critical to support nursing excellence in hospitals, including continuing education, nursing research, and professional development. However, no research has examined the experience of private donors who support nursing programs in community hospitals. Structured interviews were conducted with individuals with a history of providing significant financial support (gifts >$50 000) targeted specifically for nursing in a 176- bed community hospital in the southeastern United States. Analysis was performed using descriptive content analysis. Four themes emerged that centered around making a difference, helping nurses meet new challenges, an existing foundation of service, and valuing excellent nursing care received. This research provides specific information that nursing administrators can use when seeking philanthropic gifts to support nursing excellence programs in US community hospitals.

Effects of capillarity and microtopography on wetland specific yield

USGS Publications Warehouse

Sumner, D.M.

2007-01-01

Hydrologic models aid in describing water flows and levels in wetlands. Frequently, these models use a specific yield conceptualization to relate water flows to water level changes. Traditionally, a simple conceptualization of specific yield is used, composed of two constant values for above- and below-surface water levels and neglecting the effects of soil capillarity and land surface microtopography. The effects of capiltarity and microtopography on specific yield were evaluated at three wetland sites in the Florida Everglades. The effect of capillarity on specific yield was incorporated based on the fillable pore space within a soil moisture profile at hydrostatic equilibrium with the water table. The effect of microtopography was based on areal averaging of topographically varying values of specific yield. The results indicate that a more physically-based conceptualization of specific yield incorporating capillary and microtopographic considerations can be substantially different from the traditional two-part conceptualization, and from simpler conceptualizations incorporating only capillarity or only microtopography. For the sites considered, traditional estimates of specific yield could under- or overestimate the more physically based estimates by a factor of two or more. The results suggest that consideration of both capillarity and microtopography is important to the formulation of specific yield in physically based hydrologic models of wetlands. ?? 2007, The Society of Wetland Scientists.

Neurosurgery education: the pursuit of excellence.

PubMed

Benzel, Edward C

2010-01-01

The pursuit of excellence in education is a noble endeavor. Such has been the object of education and the goal of educators for eons. Neurosurgery education is no different from other domains in this regard. As with any discipline, this pursuit is complex and obligatorily multifaceted. It involves the use of what is often a broad and deep foundation of experience and knowledge. On this foundation, a modern and evolving infrastructure/suprastructure should be developed and nurtured. Once the infrastructure/suprastructure has taken form, a resident education plan can be derived. This plan, once enacted and executed, should be revisited, revised, and re-executed over and over again. One should never become satisfied with the status quo. A continued search for strategies and tools that achieve improvements over prior renditions of the education plan is mandatory if we hope to perpetually upgrade our process of education. Neurosurgical educators should seek criticism, admit mistakes, and modify educational behaviors accordingly. A strategy for achieving these goals regarding the pursuit of excellence in neurosurgical education is described in the pages that follow.

Nano-fibrillated cellulose-hydroxyapatite based composite foams with excellent fire resistance.

PubMed

Guo, Wenwen; Wang, Xin; Zhang, Ping; Liu, Jiajia; Song, Lei; Hu, Yuan

2018-09-01

Thermally insulating materials made from renewable resources are desirable for energy efficient buildings. Traditional petroleum-derived insulating materials such as rigid polyurethane foam and expanded polystyrene display poor flame retardancy and inorganic insulating materials such as silica aerogel are fragile. Herein, we reported a facile approach to prepare cellulose nanofiber (CNF)-hydroxyapatite (HAP) composite foam by a simple freeze-drying process. The resultant HAP-CNF composite foams showed a thermal conductivity in the range of 38.5-39.1 mW/(m K) and very low peak heat release rate (20.4 kW/m 2 ) and total heat release (1.21 MJ/m 2 ). Vertical burning tests also manifested excellent fire resistance and self-extinguishing behaviours. Considering the excellent fire resistance of this composite foam, it is of significance to fire safety solution for buildings insulating materials. Copyright © 2018 Elsevier Ltd. All rights reserved.

77 FR 4550 - President's Advisory Commission on Educational Excellence for Hispanics

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

..., nonprofit, and education communities in a national dialogue regarding the mission and objectives of this... DEPARTMENT OF EDUCATION President's Advisory Commission on Educational Excellence for Hispanics AGENCY: White House Initiative on Educational Excellence for Hispanics, Department of Education. ACTION...

High yield neutron generators using the DD reaction

NASA Astrophysics Data System (ADS)

Vainionpaa, J. H.; Harris, J. L.; Piestrup, M. A.; Gary, C. K.; Williams, D. L.; Apodaca, M. D.; Cremer, J. T.; Ji, Qing; Ludewigt, B. A.; Jones, G.

2013-04-01

A product line of high yield neutron generators has been developed at Adelphi technology inc. The generators use the D-D fusion reaction and are driven by an ion beam supplied by a microwave ion source. Yields of up to 5 × 109 n/s have been achieved, which are comparable to those obtained using the more efficient D-T reaction. The microwave-driven plasma uses the electron cyclotron resonance (ECR) to produce a high plasma density for high current and high atomic ion species. These generators have an actively pumped vacuum system that allows operation at reduced pressure in the target chamber, increasing the overall system reliability. Since no radioactive tritium is used, the generators can be easily serviced, and components can be easily replaced, providing essentially an unlimited lifetime. Fast neutron source size can be adjusted by selecting the aperture and target geometries according to customer specifications. Pulsed and continuous operation has been demonstrated. Minimum pulse lengths of 50 μs have been achieved. Since the generators are easily serviceable, they offer a long lifetime neutron generator for laboratories and commercial systems requiring continuous operation. Several of the generators have been enclosed in radiation shielding/moderator structures designed for customer specifications. These generators have been proven to be useful for prompt gamma neutron activation analysis (PGNAA), neutron activation analysis (NAA) and fast neutron radiography. Thus these generators make excellent fast, epithermal and thermal neutron sources for laboratories and industrial applications that require neutrons with safe operation, small footprint, low cost and small regulatory burden.

Definition, aims, and implementation of GA(2) LEN Urticaria Centers of Reference and Excellence.

PubMed

Maurer, M; Metz, M; Bindslev-Jensen, C; Bousquet, J; Canonica, G W; Church, M K; Godse, K V; Grattan, C E; Hide, M; Kocatürk, E; Magerl, M; Makris, M; Meshkova, R; Saini, S S; Sussman, G; Toubi, E; Zhao, Z; Zuberbier, T; Gimenez-Arnau, A

2016-08-01

GA²LEN, the Global Allergy and Asthma European Network, has recently launched a program for the development, interaction, and accreditation of centers of reference and excellence in special areas of allergy embedded in its overall quality management of allergy centers of excellence. The first area chosen is urticaria. Urticaria is a common and debilitating condition and can be a challenge for both patients and treating physicians, especially when chronic. Centers of reference and excellence in urticaria (UCAREs) can help to improve the management of hard-to-treat conditions such as urticaria. Here, we describe the aims, the requirements and deliverables, the application process, and the audit and accreditation protocol for GA²LEN UCAREs. The main aims of GA²LEN UCAREs are to provide excellence in urticaria management, to increase the knowledge of urticaria by research and education, and to promote the awareness of urticaria by advocacy activities. To become a certified GA²LEN UCARE, urticaria centers have to apply and fulfill 32 requirements, defined by specific deliverables that are assessed during an audit visit. The GA²LEN UCARE program will result in a strong network of urticaria specialists, promote urticaria research, and harmonize and improve urticaria management globally. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Simultaneous selection for cowpea (Vigna unguiculata L.) genotypes with adaptability and yield stability using mixed models.

PubMed

Torres, F E; Teodoro, P E; Rodrigues, E V; Santos, A; Corrêa, A M; Ceccon, G

2016-04-29

The aim of this study was to select erect cowpea (Vigna unguiculata L.) genotypes simultaneously for high adaptability, stability, and yield grain in Mato Grosso do Sul, Brazil using mixed models. We conducted six trials of different cowpea genotypes in 2005 and 2006 in Aquidauana, Chapadão do Sul, Dourados, and Primavera do Leste. The experimental design was randomized complete blocks with four replications and 20 genotypes. Genetic parameters were estimated by restricted maximum likelihood/best linear unbiased prediction, and selection was based on the harmonic mean of the relative performance of genetic values method using three strategies: selection based on the predicted breeding value, having considered the performance mean of the genotypes in all environments (no interaction effect); the performance in each environment (with an interaction effect); and the simultaneous selection for grain yield, stability, and adaptability. The MNC99542F-5 and MNC99-537F-4 genotypes could be grown in various environments, as they exhibited high grain yield, adaptability, and stability. The average heritability of the genotypes was moderate to high and the selective accuracy was 82%, indicating an excellent potential for selection.

76 FR 28013 - President's Advisory Commission on Educational Excellence for Hispanics

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... DEPARTMENT OF EDUCATION President's Advisory Commission on Educational Excellence for Hispanics AGENCY: U.S. Department of Education, White House Initiative on Educational Excellence for Hispanics... Education (Secretary) on all matters pertaining to the education attainment of the Hispanic community. The...

78 FR 22535 - President's Advisory Commission on Educational Excellence for Hispanics

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

..., and education communities in a national dialogue regarding the mission and objectives of this order... DEPARTMENT OF EDUCATION President's Advisory Commission on Educational Excellence for Hispanics AGENCY: White House Initiative on Educational Excellence for Hispanics, U.S. Department of Education...

The Excellence of Play. Second Edition

ERIC Educational Resources Information Center

Moyles, Janet, Ed.

2005-01-01

This second edition of "The Excellence of Play" encapsulates all of the many changes that have taken place in early childhood in the last decade. It examines the vital importance of play as a tool for learning and teaching for children and practitioners, supporting all those who work in early childhood education and care in developing and…

Teaching Excellence for All Our Students

ERIC Educational Resources Information Center

King, Sabrina Hope; Watson, Audra

2010-01-01

Education has the power to change the world. We wrote this article in the spirit of the hope embodied by the election of President Obama and the critical need for improved teaching to benefit all the nation's students. This article offers a synthesis of the characteristics of excellent teaching for the diverse student population. This article…

Equilibrator: Modeling Chemical Equilibria with Excel

ERIC Educational Resources Information Center

Vander Griend, Douglas A.

2011-01-01

Equilibrator is a Microsoft Excel program for learning about chemical equilibria through modeling, similar in function to EQS4WIN, which is no longer supported and does not work well with newer Windows operating systems. Similar to EQS4WIN, Equilibrator allows the user to define a system with temperature, initial moles, and then either total…

Profile of an excellent nurse manager: identifying and developing health care team leaders.

PubMed

Kallas, Kathryn D

2014-01-01

The purpose of this research was to identify the profile of an excellent nurse manager who can lead effective health care teams. Leadership attributes and competencies that characterize an excellent nurse manager and tools to identify them are lacking in the literature but are required to efficiently and effectively address the growing shortage of registered nurses (RNs) in health care team leadership roles and the critical linkage of these roles to patient outcomes. A profile of an excellent nurse manager was developed on the basis of the responses of nurse managers across the United States who had been identified as excellent or competent by chief nurse executive assessment or/and the Nurse Manager Ability, Leadership, and Support of Nurses staff survey to the Kouzes and Posner Leadership Practices Inventory: Self Instrument. Statistically significant distinctions exist between nurse managers who are excellent and those who are competent as assessed by the Five Practices of Exemplary Leadership, which together comprise the profile of an excellent nurse manager. The Kouzes and Posner Leadership Practices Inventory: Self Instrument can be used to identify, recruit, and develop RNs in the nurse manager role as excellent leaders of effective health care teams.

Geodynamics for Everyone: Robust Finite-Difference Heat Transfer Models using MS Excel 2007 Spreadsheets

NASA Astrophysics Data System (ADS)

Grose, C. J.

2008-05-01

Numerical geodynamics models of heat transfer are typically thought of as specialized topics of research requiring knowledge of specialized modelling software, linux platforms, and state-of-the-art finite-element codes. I have implemented analytical and numerical finite-difference techniques with Microsoft Excel 2007 spreadsheets to solve for complex solid-earth heat transfer problems for use by students, teachers, and practicing scientists without specialty in geodynamics modelling techniques and applications. While implementation of equations for use in Excel spreadsheets is occasionally cumbersome, once case boundary structure and node equations are developed, spreadsheet manipulation becomes routine. Model experimentation by modifying parameter values, geometry, and grid resolution makes Excel a useful tool whether in the classroom at the undergraduate or graduate level or for more engaging student projects. Furthermore, the ability to incorporate complex geometries and heat-transfer characteristics makes it ideal for first and occasionally higher order geodynamics simulations to better understand and constrain the results of professional field research in a setting that does not require the constraints of state-of-the-art modelling codes. The straightforward expression and manipulation of model equations in excel can also serve as a medium to better understand the confusing notations of advanced mathematical problems. To illustrate the power and robustness of computation and visualization in spreadsheet models I focus primarily on one-dimensional analytical and two-dimensional numerical solutions to two case problems: (i) the cooling of oceanic lithosphere and (ii) temperatures within subducting slabs. Excel source documents will be made available.

Excellent lubricating behavior of Brasenia schreberi mucilage.

PubMed

Li, Jinjin; Liu, Yuhong; Luo, Jianbin; Liu, Pengxiao; Zhang, Chenhui

2012-05-22

The present work reports an excellent lubrication property of an aquatic plant called Brasenia schreberi (BS). To investigate the lubrication characteristics of the BS mucilage, a novel measuring system is designed, and an ultralow friction coefficient about 0.005 between the mucilage and glass surface has been obtained. It is found that the ultralow friction is closely related to the structure of mucilage and water molecules in the mucilage. The microstructure analysis indicates that the mucilage surrounding BS forms a kind of polysaccharide gel with many nanosheets. A possible lubrication mechanism is proposed that the formation of hydration layers among these polymer nanosheets with plenty of bonded water molecules causes the ultralow friction. The excellent lubrication property has a potential application for reducing the friction between a glossy pill coated with such layer of mucilage and people's throats.

Achieving Literacy Excellence through Identifying and Utilizing High Yield Strategies

ERIC Educational Resources Information Center

Hardison, Ashley

2017-01-01

The purpose of this study was to delve into the literacy instructional strategies of selected high-performing K-2 teachers in a Clark County, Nevada school district. The study assessed the efficacy of teachers using five core literacy components: phonemic awareness, phonics, vocabulary, fluency, and comprehension for student achievement. High…

Resampling methods in Microsoft Excel® for estimating reference intervals

PubMed Central

Theodorsson, Elvar

2015-01-01

Computer- intensive resampling/bootstrap methods are feasible when calculating reference intervals from non-Gaussian or small reference samples. Microsoft Excel® in version 2010 or later includes natural functions, which lend themselves well to this purpose including recommended interpolation procedures for estimating 2.5 and 97.5 percentiles.
The purpose of this paper is to introduce the reader to resampling estimation techniques in general and in using Microsoft Excel® 2010 for the purpose of estimating reference intervals in particular.
Parametric methods are preferable to resampling methods when the distributions of observations in the reference samples is Gaussian or can transformed to that distribution even when the number of reference samples is less than 120. Resampling methods are appropriate when the distribution of data from the reference samples is non-Gaussian and in case the number of reference individuals and corresponding samples are in the order of 40. At least 500-1000 random samples with replacement should be taken from the results of measurement of the reference samples. PMID:26527366

Resampling methods in Microsoft Excel® for estimating reference intervals.

PubMed

Theodorsson, Elvar

2015-01-01

Computer-intensive resampling/bootstrap methods are feasible when calculating reference intervals from non-Gaussian or small reference samples. Microsoft Excel® in version 2010 or later includes natural functions, which lend themselves well to this purpose including recommended interpolation procedures for estimating 2.5 and 97.5 percentiles. 
The purpose of this paper is to introduce the reader to resampling estimation techniques in general and in using Microsoft Excel® 2010 for the purpose of estimating reference intervals in particular.
 Parametric methods are preferable to resampling methods when the distributions of observations in the reference samples is Gaussian or can transformed to that distribution even when the number of reference samples is less than 120. Resampling methods are appropriate when the distribution of data from the reference samples is non-Gaussian and in case the number of reference individuals and corresponding samples are in the order of 40. At least 500-1000 random samples with replacement should be taken from the results of measurement of the reference samples.

REAL-PANLAR Project for the Implementation and Accreditation of Centers of Excellence in Rheumatoid Arthritis Throughout Latin America

PubMed Central

Santos-Moreno, Pedro; Galarza-Maldonado, Claudio; Caballero-Uribe, Carlo V.; Cardiel, Mario H.; Massardo, Loreto; Soriano, Enrique R.; Olano, José Aguilar; Díaz Coto, José F.; Durán Pozo, Gabriel R.; da Silveira, Inês Guimarães; de Castrejón, Vianna J. Khoury; Pérez, Leticia Lino; Méndez Justo, Carlos A.; Montufar Guardado, Rubén A.; Muños, Rafael; Elvir, Sergio Murillo; Paredes Domínguez, Ernesto R.; Pons-Estel, Bernardo; Ríos Acosta, Carlos R.; Sandino, Sayonara; Toro Gutiérrez, Carlos E.; Villegas de Morales, Sol María; Pineda, Carlos

2015-01-01

Objective A consensus meeting of representatives of 16 Latin American and Caribbean countries and the REAL-PANLAR group met in the city of Bogota to provide recommendations for improving quality of care of patients with rheumatoid arthritis (RA) in Latin America, defining a minimum standards of care and the concept of center of excellence in RA. Methods Twenty-two rheumatologists from 16 Latin American countries with a special interest in quality of care in RA participated in the consensus meeting. Two RA Colombian patients and 2 health care excellence advisors were also invited to the meeting. A RAND-modified Delphi procedure of 5 steps was applied to define categories of centers of excellence. During a 1-day meeting, working groups were created in order to discuss and validate the minimum quality-of-care standards for the 3 proposed types of centers of excellence in RA. Positive votes from at least 60% of the attending leaders were required for the approval of each standard. Results Twenty-two opinion leaders from the PANLAR countries and the REAL-PANLAR group participated in the discussion and definition of the standards. One hundred percent of the participants agreed with setting up centers of excellence in RA throughout Latin America. Three types of centers of excellence and its criteria were defined, according to indicators of structure, processes, and outcomes: standard, optimal, and model. The standard level should have basic structure and process indicators, the intermediate or optimal level should accomplish more structure and process indicators, and model level should also fulfill outcome indicators and patient experience. Conclusions This is the first Latin American effort to standardize and harmonize the treatment provided to RA patients and to establish centers of excellence that would offer to RA patients acceptable clinical results and high levels of safety. PMID:26010179

78 FR 72070 - President's Advisory Commission on Educational Excellence for Hispanics

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

... DEPARTMENT OF EDUCATION President's Advisory Commission on Educational Excellence for Hispanics AGENCY: U.S. Department of Education, White House Initiative on Educational Excellence for Hispanics... purpose of the Commission is to advise the President and the Secretary of Education on all matters...

78 FR 4139 - President's Advisory Commission on Educational Excellence for Hispanics

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

... DEPARTMENT OF EDUCATION President's Advisory Commission on Educational Excellence for Hispanics AGENCY: U.S. Department of Education, White House Initiative on Educational Excellence for Hispanics... and listen to the conference call meeting, please arrive at the U.S. Department of Education, Lyndon...

77 FR 51983 - President's Advisory Commission on Educational Excellence for Hispanics

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... DEPARTMENT OF EDUCATION President's Advisory Commission on Educational Excellence for Hispanics AGENCY: U.S. Department of Education, White House Initiative on Educational Excellence for Hispanics... and listen to the conference call meeting, please arrive at the U.S. Department of Education, Lyndon...

Texas Tech & University of Arizona Win APPA's 2013 Award for Excellence

ERIC Educational Resources Information Center

Clendenning, Joanie; Kopach, Christopher M.

2013-01-01

APPA's highest institutional honor, the "Award for Excellence in Facilities Management (AFE)," recognizes those educational institutions whose facilities management organizations demonstrate quality in overall operations and effectiveness. The Award for Excellence is based on a set of criteria that include: Leadership; Strategic and…

Ten-year results of the Freedom Solo stentless heart valve: excellent haemodynamics but progressive valve dysfunction in the long term.

PubMed

Sponga, Sandro; Barbera, Mila Della; Pavoni, Daisy; Lechiancole, Andrea; Mazzaro, Enzo; Valente, Marialuisa; Nucifora, Gaetano; Thiene, Gaetano; Livi, Ugolino

2017-05-01

Freedom Solo (FS) is a pericardial stentless heart valve showing excellent haemodynamic performance at mid-term. The aim of this study was to evaluate the long-term performance of such bioprostheses. Between December 2004 and November 2009, 109 patients (31 men; mean age 76 ± 6 years) underwent aortic valve replacement with FS. Preoperatively, the mean NYHA class was 2.5 ± 0.7, the mean EuroSCORE II, 2.8 ± 2.5. Mean prosthesis size was 22.7 ± 1.9 mm; concomitant procedures were performed in 65 patients. Structural valve deterioration (SVD) was diagnosed according to the Valve Academic Research Consortium-2 definition. Two patients (1.8%) died within 30 days. Follow-up (72 ± 36 months) was 100% completed. The 1-, 5- and 10-year actuarial survival rates were 89, 73 and 42%, respectively, with 8 valve-related deaths; the actuarial freedom from SVD was 99, 93 and 76%. During 61 ± 39 months of follow-up, echocardiographic findings worsened progressively: At discharge, 3-5 and 7-9 years, the mean gradient was 8 ± 4, 12 ± 11 and 19 ± 19 mmHg ( P  < 0.01); the indexed effective orifice area was 1.0 ± 0.2, 0.9 ± 0.2 and 0.8 ± 0.3 cm 2 /m 2 ( P  < 0.01). Of the 13 patients who developed SVD, it was due to aortic stenosis in 11. SVD was a predictor of cardiovascular mortality at univariate analysis (HR 2.87, 1.12-7.29); 2 explanted prostheses showed massive calcium deposits with mean calcium and phosphorus contents of 234 ± 16 and 116 ± 7 mg/g dry weight, respectively. The FS bioprosthesis shows excellent mid-term clinical and haemodynamic results and offers an alternative to other valves, particularly in the case of a small aortic annulus. Worsening of FS performance was observed at late follow-up because of progressive SVD with stenosis, questioning whether it should be used in patients with a long life expectancy. © The Author 2017. Published by Oxford University Press on behalf of the

Water yield and hydrology

Treesearch

Pamela J. Edwards; Charles A. Troendle

2012-01-01

Investigations of hydrologic responses resulting from reducing vegetation density are fairly common throughout the Eastern United States. Although most studies have focused on the potential for increasing water yields or documenting effects from intensive practices that far exceed what would be done for fuel-reduction objectives, data from some less-intensive...

CORY: A Computer Program for Determining Dimension Stock Yields

Treesearch

Charles C Brunner; Marshall S. White; Fred M. Lamb; James G. Schroeder

1989-01-01

CORY is a computer program that calculates random-width, fixed-length cutting yields and best sawing sequences for either rip- or crosscut-first operations. It differs from other yield calculating programs by evaluating competing cuttings through conflict resolution models. Comparisons with Program YIELD resulted in a 9 percent greater cutting volume and a 98 percent...

Prone Whole-Breast Irradiation Using Three-Dimensional Conformal Radiotherapy in Women Undergoing Breast Conservation for Early Disease Yields High Rates of Excellent to Good Cosmetic Outcomes in Patients With Large and/or Pendulous Breasts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bergom, Carmen; Kelly, Tracy; Morrow, Natalya

2012-07-01

Purpose: To report our institution's experience using prone positioning for three-dimensional conformal radiotherapy (3D-CRT) to deliver post-lumpectomy whole breast irradiation (WBI) in a cohort of women with large and/or pendulous breasts, to determine the rate of acute and late toxicities and, more specifically, cosmetic outcomes. We hypothesized that using 3D-CRT for WBI in the prone position would reduce or eliminate patient and breast size as negative prognostic indicators for toxicities associated with WBI. Methods and Materials: From 1998 to 2006, 110 cases were treated with prone WBI using 3D-CRT. The lumpectomy, breast target volumes, heart, and lung were contoured onmore » all computed tomography scans. A dose of 45-50 Gy was prescribed to the breast volume using standard fractionation schemes. The planning goals were {>=}95% of prescription to 95% of the breast volume, and 100% of boost dose to 95% of lumpectomy planning target volume. Toxicities and cosmesis were prospectively scored using the Common Terminology Criteria for Adverse Effects Version 3.0 and the Harvard Scale. The median follow-up was 40 months. Results: The median body mass index (BMI) was 33.6 kg/m{sup 2}, and median breast volume was 1396 cm{sup 3}. The worst toxicity encountered during radiation was Grade 3 dermatitis in 5% of our patient population. Moist desquamation occurred in 16% of patients, with only 2% of patients with moist desquamation outside the inframammary/axillary folds. Eleven percent of patients had Grade {>=}2 late toxicities, including Grade 3 induration/fibrosis in 2%. Excellent to good cosmesis was achieved in 89%. Higher BMI was associated with moist desquamation and breast pain, but BMI and breast volume did not impact fibrosis or excellent to good cosmesis. Conclusion: In patients with higher BMI and/or large-pendulous breasts, delivering prone WBI using 3D-CRT results in favorable toxicity profiles and high excellent to good cosmesis rates. Higher BMI was

Electron Stimulated Desorption Yields at the Mercury's Surface Based On Hybrid Simulation Results

NASA Astrophysics Data System (ADS)

Travnicek, P. M.; Schriver, D.; Orlando, T. M.; Hellinger, P.

2016-12-01

In terms of previous research concerning the solar wind sputtering process, most of the focus has been on ion sputtering by precipitating solar wind protons, however, precipitating electrons can also result in the desorption of neutrals and ions from Mercury's surface and represents a potentially significant source of exospheric and heavy ion components. Electron stimulated desorption (ESD) is not bound by optical selection rules and electron impact energies can vary over a much wider range, including core-level excitations that easily lead to multi-electron shake up events that can cascade into localized multiple charged states that Coulomb explode with extreme kinetic energy release (up to 8 eV = 186,000 K). While considered for the lunar exosphere, ESD has not been adequately studied or quantified as a producer of neutrals and ions. ESD is a well known process which involves the excitation (often ionization) of a surface target followed by charge ejection, bond breaking and ion expulsion due to the resultant Coulomb repulsion. Though the role of ESD processes has not been discussed much with respect to Mercury, the impinging energetic electrons that are transported through the magnetosphere and precipitate can induce significant material removal. Given the energetics and the wide band-gap nature of the minerals, the departing material may also be primarily ionic. The possible role of 5 eV - 1 keV electron stimulated desorption and dissociation in "weathering" the regolith can be significant. ESD yields will be calculated based on the ion and electron precipitation profiles for the already carried out hybrid and electron simulations. Neutral and ion cloud profiles around Mercury will be calculated and combined with those profiles expected from PSD and MIV.

Yielding and flow of colloidal glasses.

PubMed

Petekidis, Georgios; Vlassopoulos, Dimitris; Pusey, Peter N

2003-01-01

We investigate the yielding and flow of hard-sphere colloidal glasses by combining rheological measurements with the technique of light scattering echo. The polymethylmethacrylate particles used are sufficiently polydisperse that crystallization is suppressed. Creep and recovery measurements show that the glasses can tolerate surprisingly large strains, up to at least 15%, before yielding irreversibly. We attribute this behaviour to 'cage elasticity', the ability of a particle and its cage of neighbours to retain their identity under quite large distortion. Results from light scattering echo, which measures the extent of irreversible particle rearrangement under oscillatory shear, support the notion of cage elasticity. In the lower concentration glasses we find that particle trajectories are partly reversible under strains which significantly exceed the yield strain.

WASP (Write a Scientific Paper) using Excel - 13: Correlation and Regression.

PubMed

Grech, Victor

2018-07-01

Correlation and regression measure the closeness of association between two continuous variables. This paper explains how to perform these tests in Microsoft Excel and their interpretation, as well as how to apply these tests dynamically using Excel's functions. Copyright © 2018 Elsevier B.V. All rights reserved.

Strategic Decisions & Staff Collaboration Highlight the 2009 Award for Excellence Winners

ERIC Educational Resources Information Center

Becker, J. Thomas; Taylor, Matthew M.; Lewis, Dan; Ertzberger, Michelle

2009-01-01

APPA's highest institutional honor, the Award for Excellence (AFE) in Facilities Management, recognizes those educational institutions whose facilities management organizations demonstrate quality in overall operations and effectiveness. Fewer than 40 institutions have received this distinct honor. The Award for Excellence is based on a set of…

Soviet test yields

NASA Astrophysics Data System (ADS)

Vergino, Eileen S.

Soviet seismologists have published descriptions of 96 nuclear explosions conducted from 1961 through 1972 at the Semipalatinsk test site, in Kazakhstan, central Asia [Bocharov et al., 1989]. With the exception of releasing news about some of their peaceful nuclear explosions (PNEs) the Soviets have never before published such a body of information.To estimate the seismic yield of a nuclear explosion it is necessary to obtain a calibrated magnitude-yield relationship based on events with known yields and with a consistent set of seismic magnitudes. U.S. estimation of Soviet test yields has been done through application of relationships to the Soviet sites based on the U.S. experience at the Nevada Test Site (NTS), making some correction for differences due to attenuation and near-source coupling of seismic waves.

ARS-Media for Excel: A Spreadsheet Tool for Calculating Media Recipes Based on Ion-Specific Constraints.

PubMed

Niedz, Randall P

2016-01-01

ARS-Media for Excel is an ion solution calculator that uses "Microsoft Excel" to generate recipes of salts for complex ion mixtures specified by the user. Generating salt combinations (recipes) that result in pre-specified target ion values is a linear programming problem. Excel's Solver add-on solves the linear programming equation to generate a recipe. Calculating a mixture of salts to generate exact solutions of complex ionic mixtures is required for at least 2 types of problems- 1) formulating relevant ecological/biological ionic solutions such as those from a specific lake, soil, cell, tissue, or organ and, 2) designing ion confounding-free experiments to determine ion-specific effects where ions are treated as statistical factors. Using ARS-Media for Excel to solve these two problems is illustrated by 1) exactly reconstructing a soil solution representative of a loamy agricultural soil and, 2) constructing an ion-based experiment to determine the effects of substituting Na+ for K+ on the growth of a Valencia sweet orange nonembryogenic cell line.

Mapping quantitative trait loci with additive effects and additive x additive epistatic interactions for biomass yield, grain yield, and straw yield using a doubled haploid population of wheat (Triticum aestivum L.).

PubMed

Li, Z K; Jiang, X L; Peng, T; Shi, C L; Han, S X; Tian, B; Zhu, Z L; Tian, J C

2014-02-28

Biomass yield is one of the most important traits for wheat (Triticum aestivum L.)-breeding programs. Increasing the yield of the aerial parts of wheat varieties will be an integral component of future wheat improvement; however, little is known regarding the genetic control of aerial part yield. A doubled haploid population, comprising 168 lines derived from a cross between two winter wheat cultivars, 'Huapei 3' (HP3) and 'Yumai 57' (YM57), was investigated. Quantitative trait loci (QTL) for total biomass yield, grain yield, and straw yield were determined for additive effects and additive x additive epistatic interactions using the QTLNetwork 2.0 software based on the mixed-linear model. Thirteen QTL were determined to have significant additive effects for the three yield traits, of which six also exhibited epistatic effects. Eleven significant additive x additive interactions were detected, of which seven occurred between QTL showing epistatic effects only, two occurred between QTL showing epistatic effects and additive effects, and two occurred between QTL with additive effects. These QTL explained 1.20 to 10.87% of the total phenotypic variation. The QTL with an allele originating from YM57 on chromosome 4B and another QTL contributed by HP3 alleles on chromosome 4D were simultaneously detected on the same or adjacent chromosome intervals for the three traits in two environments. Most of the repeatedly detected QTL across environments were not significant (P > 0.05). These results have implications for selection strategies in wheat biomass yield and for increasing the yield of the aerial part of wheat.

Improving the Teaching of Microsoft Excel: Traditional Book versus Online Platform

ERIC Educational Resources Information Center

Brooks, Stoney; Taylor, Joseph

2016-01-01

The authors explore the differences between traditional, book-based methods of teaching Excel and online, platform-supported methods by comparing teaching students in different locations, with and without online support. As Excel is a critical skill for business majors, the authors investigate which methods and locations provide the highest…

Analysis of Variance with Summary Statistics in Microsoft® Excel®

ERIC Educational Resources Information Center

Larson, David A.; Hsu, Ko-Cheng

2010-01-01

Students regularly are asked to solve Single Factor Analysis of Variance problems given only the sample summary statistics (number of observations per category, category means, and corresponding category standard deviations). Most undergraduate students today use Excel for data analysis of this type. However, Excel, like all other statistical…

Brewer, Maine Wastewater Treatment Plant Recognized for Excellence

EPA Pesticide Factsheets

The Brewer Water Pollution Control Facility was recently honored with a 2015 Regional Wastewater Treatment Plant Excellence Award by the US Environmental Protection Agency's New England regional office.

Impact of heterozygosity and heterogeneity on cotton lint yield stability: II. Lint yield components

USDA-ARS?s Scientific Manuscript database

In order to determine which yield components may contribute to yield stability, an 18-environment field study was undertaken to observe the mean, standard deviation (SD), and coefficient of variation (CV) for cotton lint yield components in population types that differed for lint yield stability. Th...

Predicting Great Lakes fish yields: tools and constraints

USGS Publications Warehouse

Lewis, C.A.; Schupp, D.H.; Taylor, W.W.; Collins, J.J.; Hatch, Richard W.

1987-01-01

Prediction of yield is a critical component of fisheries management. The development of sound yield prediction methodology and the application of the results of yield prediction are central to the evolution of strategies to achieve stated goals for Great Lakes fisheries and to the measurement of progress toward those goals. Despite general availability of species yield models, yield prediction for many Great Lakes fisheries has been poor due to the instability of the fish communities and the inadequacy of available data. A host of biological, institutional, and societal factors constrain both the development of sound predictions and their application to management. Improved predictive capability requires increased stability of Great Lakes fisheries through rehabilitation of well-integrated communities, improvement of data collection, data standardization and information-sharing mechanisms, and further development of the methodology for yield prediction. Most important is the creation of a better-informed public that will in turn establish the political will to do what is required.

Absolute quantum yield measurement of powder samples.

PubMed

Moreno, Luis A

2012-05-12

Measurement of fluorescence quantum yield has become an important tool in the search for new solutions in the development, evaluation, quality control and research of illumination, AV equipment, organic EL material, films, filters and fluorescent probes for bio-industry. Quantum yield is calculated as the ratio of the number of photons absorbed, to the number of photons emitted by a material. The higher the quantum yield, the better the efficiency of the fluorescent material. For the measurements featured in this video, we will use the Hitachi F-7000 fluorescence spectrophotometer equipped with the Quantum Yield measuring accessory and Report Generator program. All the information provided applies to this system. Measurement of quantum yield in powder samples is performed following these steps: 1. Generation of instrument correction factors for the excitation and emission monochromators. This is an important requirement for the correct measurement of quantum yield. It has been performed in advance for the full measurement range of the instrument and will not be shown in this video due to time limitations. 2. Measurement of integrating sphere correction factors. The purpose of this step is to take into consideration reflectivity characteristics of the integrating sphere used for the measurements. 3. Reference and Sample measurement using direct excitation and indirect excitation. 4. Quantum Yield calculation using Direct and Indirect excitation. Direct excitation is when the sample is facing directly the excitation beam, which would be the normal measurement setup. However, because we use an integrating sphere, a portion of the emitted photons resulting from the sample fluorescence are reflected by the integrating sphere and will re-excite the sample, so we need to take into consideration indirect excitation. This is accomplished by measuring the sample placed in the port facing the emission monochromator, calculating indirect quantum yield and correcting the direct

WASP (Write a Scientific Paper) using Excel - 8: t-Tests.

PubMed

Grech, Victor

2018-06-01

t-Testing is a common component of inferential statistics when comparing two means. This paper explains the central limit theorem and the concept of the null hypothesis as well as types of errors. On the practical side, this paper outlines how different t-tests may be performed in Microsoft Excel, for different purposes, both statically as well as dynamically, with Excel's functions. Copyright © 2018 Elsevier B.V. All rights reserved.

Marketing and branding your Centers of Excellence.

PubMed

Herrod, K G

2001-01-01

Branding your Centers of Excellence requires more than simply advertising. Developing a strong brand involves completing your due diligence. Adequate reparation and strategic planning will help your organization successfully navigate looming pitfalls, overcome competitive pressures, and make a direct hit with physicians and consumers.

76 FR 6774 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-08

... FURTHER INFORMATION CONTACT: Stephen Chen, Designated Federal Official, Equity and Excellence Commission, U.S. Department of Education, 400 Maryland Avenue, SE., Washington, DC 20202. E-mail: Stephen.Chen... contact Stephen Chen via e-mail at stephen[email protected] Individuals interested in attending the meeting...

The silver effect of admission glucose level on excellent outcome in thrombolysed stroke patients.

PubMed

Rosso, Charlotte; Baronnet, Flore; Diaz, Belen; Le Bouc, Raphael; Frasca Polara, Giulia; Moulton, Eric Jr; Deltour, Sandrine; Leger, Anne; Crozier, Sophie; Samson, Yves

2018-05-18

Higher admission glucose levels (AGL) are associated with less favorable outcome in thrombolysis. But, could AGL's impact on outcome vary by onset-to-treatment (OTT) time? Is hyperglycemia associated with a shorter therapeutic time window for excellent outcome for thrombolysed stroke patients? We assessed predictive values of AGL, baseline NIHSS, age, and OTT time quartiles on excellent outcome (3-month modified Rankin score of 0-1) in 773 patients treated by rt-Pa. We added the AGL × OTT time quartile interaction in the model and separately analyzed the predictive values of AGL, age, and NIHSS for each OTT time quartile if the interaction was significant. AGL, baseline NIHSS, age, and OTT time quartiles were significant predictors. When added in the model, the AGL × OTT interaction was significant (OR: 0.96, 95% CI: 0.94-0.99, p: 0.0009). AGL was predictive only during the third OTT time quartile (181-224 min). During this period, the predicted rate of excellent outcome was 16% for AGL = 6.5 mmol/L and 8% for AGL = 8 mmol/L. The rate of excellent outcome was not decreased in hyperglycemic patients for OTT time ≤ 180 min (20 vs. 24.5% p: 0.37), but was decreased for OTT time > 180 min (9.6 vs. 26.7% p: 0.00001). Similar results were found in patients with MCA recanalization, but not in patients without recanalization. The therapeutic time window for excellent outcome is shortened in hyperglycemic patients. This would support the design of "freezing penumbra" randomized trials based on ultra-early AGL control.

Raising yield potential in wheat: increasing photosynthesis capacity and efficiency

USDA-ARS?s Scientific Manuscript database

Increasing wheat yields to help to ensure food security is a major challenge. Meeting this challenge requires a quantum improvement in the yield potential of wheat. Past increases in yield potential have largely resulted from improvements in harvest index not through increased biomass. Further large...

Torsional Angle Driver (TorAD) System for HyperChem/Excel

NASA Astrophysics Data System (ADS)

Starkey, Ronald

1999-02-01

The torsional angle driver system for HyperChem/Excel is a package of several Excel spreadsheets and macro programs to be used with HyperChem to obtain and plot information, such as total energy, for the conformations that result from a 360° rotation about a torsional angle system in a molecule. The TorAD system also includes several HyperChem scripts to facilitate its use. TorAD was developed for use in the undergraduate organic chemistry laboratory. The results obtained with TorAD could be obtained manually with HyperChem, but it would take considerable time and would not be instructive to the students. Use of the TorAD system allows students to spend their time on the more important aspect of conformation analysisinterpretation of results. The Excel spreadsheet/macro programs in TorAD include:

· Tor_xl_a and tor_xl obtain and plot the total energy at 5° torsional-angle intervals. The calculation method, the torsional-angle restraint, and the structure to be used at each angle can be set by the user. The advanced version, tor_xl_a, which requires HyperChem 4.5 or later, also allows torsional-angle structures to be saved for later recall as individual structures or, using a HyperChem script, in a movie format. It also provides a rapid scan of the 360° rotation where only single-point calculations, rather than geometry optimizations, are performed. The tor_xl system will perform routine tasks in a manner suitable for most instructional settings. · Tor_Comp performs molecular mechanics optimizations at 5° intervals and obtains and plots four energy parameters (total, torsional, nonbonded, and bond [bend plus stretch] energy) as a function of torsional angle. The calculation method and the restraint can be specified. · TorDipol produces a plot of the total energy and the calculated dipole moment at 5° steps of the torsional angle. The default calculation is the semi-empirical AM

Universities and the Mobilization of Claims of Excellence for Competitive Advantage

ERIC Educational Resources Information Center

Wangenge-Ouma, Gerald; Langa, Patricio V.

2010-01-01

This study discusses the phenomenon of making claims of excellence by universities, which we interpret as a response, inter alia, to the hitherto unfamiliar context of scarce and diminishing resources. The main objective is to understand how claims of excellence are mobilised by higher education institutions to achieve "competitive advantage". The…

Living excellence: life after Magnet designation.

PubMed

Malloch, Kathy

2009-01-01

The achievement of Magnet recognition is the beginning of a new way of being as an organization. Strategies to support innovation leadership, value-based decision making, agility, sustainability of excellence, technology advancements, and lifelong learning are discussed within the framework of the Magnet organization. Behaviors and challenges of living the expectations of the Magnet organization are presented as opportunities to assist healthcare leaders in this important work.

Hotel shows health system keys to service excellence.

PubMed

2003-08-01

Ritz-Carlton partnership part of broader program pursuing service excellence. Nearly 600 system leaders will participate in day-long seminars. GE, Harvard serve as strategic partners for ongoing educational efforts.

Improved photoluminescence quantum yield and stability of CdSe-TOP, CdSe-ODA-TOPO, CdSe/CdS and CdSe/EP nanocomposites

NASA Astrophysics Data System (ADS)

Wei, Shutian; Zhu, Zhilin; Wang, Zhixiao; Wei, Gugangfen; Wang, Pingjian; Li, Hai; Hua, Zhen; Lin, Zhonghai

2016-07-01

Size-controllable monodisperse CdSe nanocrystals with different organic capping were prepared based on the hot-injection method. The effective separation of nucleation and growth was achieved by rapidly mixing two highly reactive precursors. As a contrast, we prepared CdSe/CdS nanocrystals (NCs) successfully based on the selective ion layer adsorption and reaction (SILAR) technique. This inorganic capping obtained higher photoluminescence quantum yield (PLQY) of 59.3% compared with organic capping of 40.8%. Furthermore, the CdSe-epoxy resin (EP) composites were prepared by adopting a flexible ex situ method, and showed excellent stability in the ambient environment for one year. So the composites with both high PLQY of nanocrystals and excellent stability are very promising to device application.

NASA Excellence Award for Quality and Productivity 1989 highlights. The 1989 recipient: Lockheed Engineering and Sciences Company

NASA Technical Reports Server (NTRS)

1990-01-01

The NASA Excellence Award for Productivity and Quality is the result of NASA's desire to encourage superior quality and the continuous improvement philosophy in the aerospace industry. It is awarded to NASA contractors, subcontractors, and suppliers who have demonstrated sustained excellence, customer orientation, and outstanding achievements in a total quality management (TQM) environment. The 'highlights' booklet is intended to transfer successful techniques demonstrated by the performance and quality of major NASA contractors.

Modelling crop yield in Iberia under drought conditions

NASA Astrophysics Data System (ADS)

Ribeiro, Andreia; Páscoa, Patrícia; Russo, Ana; Gouveia, Célia

2017-04-01

The improved assessment of the cereal yield and crop loss under drought conditions are essential to meet the increasing economy demands. The growing frequency and severity of the extreme drought conditions in the Iberian Peninsula (IP) has been likely responsible for negative impacts on agriculture, namely on crop yield losses. Therefore, a continuous monitoring of vegetation activity and a reliable estimation of drought impacts is crucial to contribute for the agricultural drought management and development of suitable information tools. This works aims to assess the influence of drought conditions in agricultural yields over the IP, considering cereal yields from mainly rainfed agriculture for the provinces with higher productivity. The main target is to develop a strategy to model drought risk on agriculture for wheat yield at a province level. In order to achieve this goal a combined assessment was made using a drought indicator (Standardized Precipitation Evapotranspiration Index, SPEI) to evaluate drought conditions together with a widely used vegetation index (Normalized Difference Vegetation Index, NDVI) to monitor vegetation activity. A correlation analysis between detrended wheat yield and SPEI was performed in order to assess the vegetation response to each time scale of drought occurrence and also identify the moment of the vegetative cycle when the crop yields are more vulnerable to drought conditions. The time scales and months of SPEI, together with the months of NDVI, better related with wheat yield were chosen to perform a multivariate regression analysis to simulate crop yield. Model results are satisfactory and highlighted the usefulness of such analysis in the framework of developing a drought risk model for crop yields. In terms of an operational point of view, the results aim to contribute to an improved understanding of crop yield management under dry conditions, particularly adding substantial information on the advantages of combining

77 FR 2711 - Equity and Excellence Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-19

... DEPARTMENT OF EDUCATION Equity and Excellence Commission AGENCY: Office for Civil Rights, Education. ACTION: Notice of open meeting (Amended). SUMMARY: On January 5, 2012, the Office for Civil... will participate in an Ethics briefing prior to the start of the January 23rd meeting This notice sets...

Excellence in Ophthalmology: Continuous Certification.

PubMed

Siatkowski, R Michael

2016-09-01

Over the course of a century, American medical specialty boards including the American Board of Ophthalmology (ABO) have developed significant expertise in assessing physician competence on completion of postgraduate training and, more recently, in defining appropriate criteria for continuous learning and quality improvement in practicing physicians. This article explores why maintaining career-long excellence is an evolving challenge, but one that is at the heart of the ABO's mission to protect the public by improving patient care. Copyright © 2016 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

Excellence for All: A Nietzschean-Inspired Approach in Professional Higher Education

ERIC Educational Resources Information Center

Joosten, Henriëtta

2015-01-01

Europe's objectives of economic growth and job creation require large numbers of professionals who are willing and able to innovate and rise above themselves. In this article, a concept of excellence is developed that can be broadly applied in professional higher education. This concept of excellence derives from three concepts which the German…

Using normalized difference vegetation index (NDVI) to estimate sugarcane yield and yield components

USDA-ARS?s Scientific Manuscript database

Sugarcane (Saccharum spp.) yield and yield components are important traits for growers and scientists to evaluate and select cultivars. Collection of these yield data would be labor intensive and time consuming in the early selection stages of sugarcane breeding cultivar development programs with a ...

Center of Cancer Nanotechnology Excellence for Translational Diagnostics

Cancer.gov

The Center of Cancer Nanotechnology Excellence for Translational Diagnostics, which forms the third cycle CCNE Program at Stanford University, is a consortium that has three highly synchronized Projects and three Cores.

78 FR 53014 - Proposed Information Collection (Principles of Excellence Complaint Intake Questionnaire...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-NEW] Proposed Information Collection (Principles of Excellence Complaint Intake Questionnaire) Activity; Withdrawal AGENCY: Veterans Benefits... to comment on a proposed information collection titled ``Principles of Excellence Complaint Intake...

Evolution Projects Yield Results

ERIC Educational Resources Information Center

Sparks, Sarah D.

2010-01-01

When a federal court in 2005 rejected an attempt by the Dover, Pennsylvania, school board to introduce intelligent design as an alternative to evolution to explain the development of life on Earth, it sparked a renaissance in involvement among scientists in K-12 science instruction. Now, some of those teaching programs, studies, and research…

How Big Was It? Getting at Yield

NASA Astrophysics Data System (ADS)

Pasyanos, M.; Walter, W. R.; Ford, S. R.

2013-12-01

One of the most coveted pieces of information in the wake of a nuclear test is the explosive yield. Determining the yield from remote observations, however, is not necessarily a trivial thing. For instance, recorded observations of seismic amplitudes, used to estimate the yield, are significantly modified by the intervening media, which varies widely, and needs to be properly accounted for. Even after correcting for propagation effects such as geometrical spreading, attenuation, and station site terms, getting from the resulting source term to a yield depends on the specifics of the explosion source model, including material properties, and depth. Some formulas are based on assumptions of the explosion having a standard depth-of-burial and observed amplitudes can vary if the actual test is either significantly overburied or underburied. We will consider the complications and challenges of making these determinations using a number of standard, more traditional methods and a more recent method that we have developed using regional waveform envelopes. We will do this comparison for recent declared nuclear tests from the DPRK. We will also compare the methods using older explosions at the Nevada Test Site with announced yields, material and depths, so that actual performance can be measured. In all cases, we also strive to quantify realistic uncertainties on the yield estimation.

Anomalous effects in the aluminum oxide sputtering yield

NASA Astrophysics Data System (ADS)

Schelfhout, R.; Strijckmans, K.; Depla, D.

2018-04-01

The sputtering yield of aluminum oxide during reactive magnetron sputtering has been quantified by a new and fast method. The method is based on the meticulous determination of the reactive gas consumption during reactive DC magnetron sputtering and has been deployed to determine the sputtering yield of aluminum oxide. The accuracy of the proposed method is demonstrated by comparing its results to the common weight loss method excluding secondary effects such as redeposition. Both methods exhibit a decrease in sputtering yield with increasing discharge current. This feature of the aluminum oxide sputtering yield is described for the first time. It resembles the discrepancy between published high sputtering yield values determined by low current ion beams and the low deposition rate in the poisoned mode during reactive magnetron sputtering. Moreover, the usefulness of the new method arises from its time-resolved capabilities. The evolution of the alumina sputtering yield can now be measured up to a resolution of seconds. This reveals the complex dynamical behavior of the sputtering yield. A plausible explanation of the observed anomalies seems to originate from the balance between retention and out-diffusion of implanted gas atoms, while other possible causes are commented.

High yield neutron generators using the DD reaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vainionpaa, J. H.; Harris, J. L.; Piestrup, M. A.

2013-04-19

A product line of high yield neutron generators has been developed at Adelphi technology inc. The generators use the D-D fusion reaction and are driven by an ion beam supplied by a microwave ion source. Yields of up to 5 Multiplication-Sign 10{sup 9} n/s have been achieved, which are comparable to those obtained using the more efficient D-T reaction. The microwave-driven plasma uses the electron cyclotron resonance (ECR) to produce a high plasma density for high current and high atomic ion species. These generators have an actively pumped vacuum system that allows operation at reduced pressure in the target chamber,more » increasing the overall system reliability. Since no radioactive tritium is used, the generators can be easily serviced, and components can be easily replaced, providing essentially an unlimited lifetime. Fast neutron source size can be adjusted by selecting the aperture and target geometries according to customer specifications. Pulsed and continuous operation has been demonstrated. Minimum pulse lengths of 50 {mu}s have been achieved. Since the generators are easily serviceable, they offer a long lifetime neutron generator for laboratories and commercial systems requiring continuous operation. Several of the generators have been enclosed in radiation shielding/moderator structures designed for customer specifications. These generators have been proven to be useful for prompt gamma neutron activation analysis (PGNAA), neutron activation analysis (NAA) and fast neutron radiography. Thus these generators make excellent fast, epithermal and thermal neutron sources for laboratories and industrial applications that require neutrons with safe operation, small footprint, low cost and small regulatory burden.« less

Quadriceps tendon rupture - treatment results.

PubMed

Popov, Iva; Ristić, Vladimir; Maljanović, Mirsad; Milankov, Vukadin

2013-01-01

Quadriceps tendon rupture is a rare but rather serious injury. If this injury is not promptly recognized and early operated, it may lead to disability. This research was aimed at pointing out the results and complications of the quadriceps tendon rupture surgical treatment. This retrospective multicentric study was conducted in a group of 29 patients (mostly elderly men). Lysholm knee scoring scale was used to evaluate the surgical results. The post-operative results were compared in relation to the type of tendon rupture reconstructions (acute or chronic), various surgical techniques, type of injuries (unilateral or bilateral) as well as the presence or absence of comorbid risk factors in the patients. The average value of a Lysholm score was 87.6. Excellent and satisfactory Lysholm score results dominated in our sample of patients. Better post-operative results were recorded in the group of patients without risk factors, in case of a bilateral injury, and in case of an acute injury. The best result was obtained after performing the reconstruction using anchors, and the worst result came after using Codivilla technique. Early diagnosis and surgical treatment are an absolute imperative in management of this injury. We have not proven that a certain surgical technique has an advantage over the others. A comorbid risk factor is related to a lower Lysholm score. Despite a few cases of complications, we can conclude that the surgical treatment yields satisfactory results.

University Students' Conceptions of an Excellent Physical Education Teacher in China

ERIC Educational Resources Information Center

Song, Lihua; Chen, Junjun

2013-01-01

This study investigated how university students perceive an excellent physical education (PE) teacher at the university level. A sample of 2000 university students at four universities in China responded to a 53-item questionnaire. A 6-factor, 28-item model of an excellent teacher in PE was subsequently generated with a statistical good fit, using…

A Proposal for Excellence in Educational Administration.

ERIC Educational Resources Information Center

Achilles, C. M.

Numerous 1983-84 educational improvement studies emphasized the need for strong principal leadership, yet present reform efforts fail to address adequately principal preparation. This proposal for administrative excellence has a four-category focus: recruitment of those with strong liberal arts degrees; selection of those committed to an 11-month…

Improving Conceptual Understanding and Representation Skills Through Excel-Based Modeling

NASA Astrophysics Data System (ADS)

Malone, Kathy L.; Schunn, Christian D.; Schuchardt, Anita M.

2018-02-01

The National Research Council framework for science education and the Next Generation Science Standards have developed a need for additional research and development of curricula that is both technologically model-based and includes engineering practices. This is especially the case for biology education. This paper describes a quasi-experimental design study to test the effectiveness of a model-based curriculum focused on the concepts of natural selection and population ecology that makes use of Excel modeling tools (Modeling Instruction in Biology with Excel, MBI-E). The curriculum revolves around the bio-engineering practice of controlling an invasive species. The study takes place in the Midwest within ten high schools teaching a regular-level introductory biology class. A post-test was designed that targeted a number of common misconceptions in both concept areas as well as representational usage. The results of a post-test demonstrate that the MBI-E students significantly outperformed the traditional classes in both natural selection and population ecology concepts, thus overcoming a number of misconceptions. In addition, implementing students made use of more multiple representations as well as demonstrating greater fascination for science.

Teaching Fundamental Skills in Microsoft Excel to First-Year Students in Quantitative Analysis

ERIC Educational Resources Information Center

Rubin, Samuel J.; Abrams, Binyomin

2015-01-01

Despite their technological savvy, most students entering university lack the necessary computer skills to succeed in a quantitative analysis course, in which they are often expected to input, analyze, and plot results of experiments without any previous formal education in Microsoft Excel or similar programs. This lack of formal education results…

The nature of excellent clinicians at an academic health science center: a qualitative study.

PubMed

Mahant, Sanjay; Jovcevska, Vesna; Wadhwa, Anupma

2012-12-01

To understand the nature of excellent clinicians at an academic health science center by exploring how and why excellent clinicians achieve high performance. From 2008 to 2010, the authors conducted a qualitative study using a grounded theory approach. Members of the Clinical Advisory Committee in the Department of Pediatrics at the University of Toronto nominated peers whom they saw as excellent clinicians. The authors then conducted in-depth interviews with the most frequently nominated clinicians. They audio-recorded and transcribed the interviews and coded the transcripts to identify emergent themes. From interviews with 13 peer-nominated, excellent clinicians, a model emerged. Dominant themes fell into three categories: (1) core philosophy, (2) deliberate activities, and (3) everyday practice. Excellent clinicians are driven by a core philosophy defined by high intrinsic motivation and passion for patient care and humility. They refine their clinical skills through two deliberate activities-reflective clinical practice and scholarship. Their high performance in everyday practice is characterized by clinical skills and cognitive ability, people skills, engagement, and adaptability. A rich theory emerged explaining how excellent clinicians, driven by a core philosophy and engaged in deliberate activities, achieve high performance in everyday practice. This theory of the nature of excellent clinicians provides a holistic perspective of individual performance, informs medical education, supports faculty career development, and promotes clinical excellence in the culture of academic medicine.

Surface Spectroscopy Center Of Excellence Project

NASA Technical Reports Server (NTRS)

Wooden, Diane

2014-01-01

We propose to develop a national center of excellence in Regolith Radiative Transfer (RRT), i.e., in modeling spectral reflectivity and emissivity of grainy or structured surfaces. The focus is the regime where the structural elements of grainy surfaces have grain sizes and separations of tens of microns, comparable to the wavelengths carrying diagnostic compositional information. This regime is of fundamental interest to remote sensing of planetary and terrestrial surfaces.

Excellence in the Surface Coast Guard.

DTIC Science & Technology

1984-12-01

about succesful business organizations in their book, IN SEARCH OF EXCELLENCE. What Peters and Waterman called "Productivity through People ", we talked as... PEOPLE HAVE THE RIGHT STUFF--------- 23 E. A GOOD SHIP LOOKS GOOD--------------------- 25 F. TRAINING THE TROOPS------------------------ 26 TV. THE...8217~. ~ . h ~ * ~ * ACKNOWLEDGEMENTS The authors would like to thank the many Coast Guard - officers and enlisted people who took the time and effort to talk

Excel-based scheduling for reallocation of nursing staff.

PubMed

2016-10-19

Outi Annelli Tuominen and colleagues write in Nursing Management about the use of an Excel-based scheduling system for reallocation of nursing staff, which was trialled on ward managers and assistant ward managers.

Characterizing bias correction uncertainty in wheat yield predictions

NASA Astrophysics Data System (ADS)

Ortiz, Andrea Monica; Jones, Julie; Freckleton, Robert; Scaife, Adam

2017-04-01

Farming systems are under increased pressure due to current and future climate change, variability and extremes. Research on the impacts of climate change on crop production typically rely on the output of complex Global and Regional Climate Models, which are used as input to crop impact models. Yield predictions from these top-down approaches can have high uncertainty for several reasons, including diverse model construction and parameterization, future emissions scenarios, and inherent or response uncertainty. These uncertainties propagate down each step of the 'cascade of uncertainty' that flows from climate input to impact predictions, leading to yield predictions that may be too complex for their intended use in practical adaptation options. In addition to uncertainty from impact models, uncertainty can also stem from the intermediate steps that are used in impact studies to adjust climate model simulations to become more realistic when compared to observations, or to correct the spatial or temporal resolution of climate simulations, which are often not directly applicable as input into impact models. These important steps of bias correction or calibration also add uncertainty to final yield predictions, given the various approaches that exist to correct climate model simulations. In order to address how much uncertainty the choice of bias correction method can add to yield predictions, we use several evaluation runs from Regional Climate Models from the Coordinated Regional Downscaling Experiment over Europe (EURO-CORDEX) at different resolutions together with different bias correction methods (linear and variance scaling, power transformation, quantile-quantile mapping) as input to a statistical crop model for wheat, a staple European food crop. The objective of our work is to compare the resulting simulation-driven hindcasted wheat yields to climate observation-driven wheat yield hindcasts from the UK and Germany in order to determine ranges of yield

Demagnetization Analysis in Excel (DAIE) - An open source workbook in Excel for viewing and analyzing demagnetization data from paleomagnetic discrete samples and u-channels

NASA Astrophysics Data System (ADS)

Sagnotti, Leonardo

2013-04-01

Modern rock magnetometers and stepwise demagnetization procedures result in the production of large datasets, which need a versatile and fast software for their display and analysis. Various software packages for paleomagnetic analyses have been recently developed to overcome the problems linked to the limited capability and the loss of operability of early codes written in obsolete computer languages and/or platforms, not compatible with modern 64 bit processors. The Demagnetization Analysis in Excel (DAIE) workbook is a new software that has been designed to make the analysis of demagnetization data easy and accessible on an application (Microsoft Excel) widely diffused and available on both the Microsoft Windows and Mac OS X operating systems. The widespread diffusion of Excel should guarantee a long term working life, since compatibility and functionality of current Excel files should be most likely maintained during the development of new processors and operating systems. DAIE is designed for viewing and analyzing stepwise demagnetization data of both discrete and u-channel samples. DAIE consists of a single file and has an open modular structure organized in 10 distinct worksheets. The standard demagnetization diagrams and various parameters of common use are shown on the same worksheet including selectable parameters and user's choices. The remanence characteristic components may be computed by principal component analysis (PCA) on a selected interval of demagnetization steps. Saving of the PCA data can be done both sample by sample, or in automatic by applying the selected choices to all the samples included in the file. The DAIE open structure allows easy personalization, development and improvement. The workbook has the following features which may be valuable for various users: - Operability in nearly all the computers and platforms; - Easy inputs of demagnetization data by "copy and paste" from ASCII files; - Easy export of computed parameters and

Characterization of sub-0.18-μm critical dimension pattern collapse for yield improvement

NASA Astrophysics Data System (ADS)

Zhong, Tom X.; Gurer, Emir; Lee, Ed C.; Bai, Hong; Gendron, Bill; Krishna, Murthy S.; Reynolds, Reese M.

1999-09-01

In this study, we demonstrate that surface-resist interface interactions are becoming more crucial in DUV lithography as we enter deep into the sub-wavelength era of smaller critical dimension (CD) size and high aspect ratio. This interaction reveals itself as an adhesion reduction of the resist film due to the smaller contact area between the feature and the substrate. Considerable yield improvements in a manufacturing environment can be realized if pattern collapsing of smaller features is prevented by means of proper priming. In addition, next generation photoresist processing equipments must be able to deliver excellent on-wafer results with minimum chemical consumption as environmental health and safety (EHS) requirements are better appreciated in the marketplace. HMDS is not only highly toxic but it is also a prime threat to CD control of most deep ultra violet (DUV) photoresists used for sub-0.18 micrometer design rules. The by-product NH3 created during priming process with HMDS can neutralize the photo-acid created during the exposure step. There are many technical opportunities in this usually neglected priming process step. In this study, we characterized sub-0.18 micrometer isolated line pattern collapse for UV5 resist on bare Si wafers by using a scanning electron microscope (SEM). The smallest line width printability on wafers primed with different contact angles was analyzed by using both top down and cross section SEM images. Our results show that there is a strong effect of substrate surface and film interface interaction on device yields. More specifically, there is a strong correlation between pattern integrity of features down to 115 nm and vapor prime process conditions. In general, wafers with higher contact angle can support smaller line widths. These results suggest that higher contact angle than the current specification will be required for sub-0.1 micrometer design rule for improved yield. An alternative material to HMDS will probably be

SU-E-E-02: An Excel-Based Study Tool for ABR-Style Exams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cline, K; Stanley, D; Defoor, D

2015-06-15

Purpose: As the landscape of learning and testing shifts toward a computer-based environment, a replacement for paper-based methods of studying is desirable. Using Microsoft Excel, a study tool was developed that allows the user to populate multiple-choice questions and then generate an interactive quiz session to answer them. Methods: The code for the tool was written using Microsoft Excel Visual Basic for Applications with the intent that this tool could be implemented by any institution with Excel. The base tool is a template with a setup macro, which builds out the structure based on user’s input. Once the framework ismore » built, the user can input sets of multiple-choice questions, answer choices, and even add figures. The tool can be run in random-question or sequential-question mode for single or multiple courses of study. The interactive session allows the user to select answer choices and immediate feedback is provided. Once the user is finished studying, the tool records the day’s progress by reporting progress statistics useful for trending. Results: Six doctoral students at UTHSCSA have used this tool for the past two months to study for their qualifying exam, which is similar in format and content to the American Board of Radiology (ABR) Therapeutic Part II exam. The students collaborated to create a repository of questions, met weekly to go over these questions, and then used the tool to prepare for their exam. Conclusion: The study tool has provided an effective and efficient way for students to collaborate and be held accountable for exam preparation. The ease of use and familiarity of Excel are important factors for the tool’s use. There are software packages to create similar question banks, but this study tool has no additional cost for those that already have Excel. The study tool will be made openly available.« less

Assessment of cluster yield components by image analysis.

PubMed

Diago, Maria P; Tardaguila, Javier; Aleixos, Nuria; Millan, Borja; Prats-Montalban, Jose M; Cubero, Sergio; Blasco, Jose

2015-04-01

Berry weight, berry number and cluster weight are key parameters for yield estimation for wine and tablegrape industry. Current yield prediction methods are destructive, labour-demanding and time-consuming. In this work, a new methodology, based on image analysis was developed to determine cluster yield components in a fast and inexpensive way. Clusters of seven different red varieties of grapevine (Vitis vinifera L.) were photographed under laboratory conditions and their cluster yield components manually determined after image acquisition. Two algorithms based on the Canny and the logarithmic image processing approaches were tested to find the contours of the berries in the images prior to berry detection performed by means of the Hough Transform. Results were obtained in two ways: by analysing either a single image of the cluster or using four images per cluster from different orientations. The best results (R(2) between 69% and 95% in berry detection and between 65% and 97% in cluster weight estimation) were achieved using four images and the Canny algorithm. The model's capability based on image analysis to predict berry weight was 84%. The new and low-cost methodology presented here enabled the assessment of cluster yield components, saving time and providing inexpensive information in comparison with current manual methods. © 2014 Society of Chemical Industry.

Recent patterns of crop yield growth and stagnation.

PubMed

Ray, Deepak K; Ramankutty, Navin; Mueller, Nathaniel D; West, Paul C; Foley, Jonathan A

2012-01-01

In the coming decades, continued population growth, rising meat and dairy consumption and expanding biofuel use will dramatically increase the pressure on global agriculture. Even as we face these future burdens, there have been scattered reports of yield stagnation in the world's major cereal crops, including maize, rice and wheat. Here we study data from ∼2.5 million census observations across the globe extending over the period 1961-2008. We examined the trends in crop yields for four key global crops: maize, rice, wheat and soybeans. Although yields continue to increase in many areas, we find that across 24-39% of maize-, rice-, wheat- and soybean-growing areas, yields either never improve, stagnate or collapse. This result underscores the challenge of meeting increasing global agricultural demands. New investments in underperforming regions, as well as strategies to continue increasing yields in the high-performing areas, are required.

Creating Cultures of Excellence: Strategies and Outcomes

ERIC Educational Resources Information Center

Mintrom, Michael

2014-01-01

Research findings on effective support for learning, the development of expertise, and the psychology of success suggest that the pursuit of excellence is teachable. Within the emerging field of research and practice termed "the scholarship of teaching and learning," considerable effort has been made to document the practices of teachers…

Curriculum for Excellence Science: Vision or Confusion?

ERIC Educational Resources Information Center

Day, Stephen; Bryce, Tom

2013-01-01

Policy studies in science education do not have a particularly high profile. For science teachers, policy lurks in the background, somewhat disconnected from their normal classroom practice; for many, it is simply taken-for-granted. This paper analyses policy documents which have emerged from Curriculum for Excellence ("CfE") that impact…

Financing Excellence in Public Education. Focus 13.

ERIC Educational Resources Information Center

Benderson, Albert

"A Nation at Risk" and other recent reports have focused public attention on excellence in education. During the same period, the federal government has cut aid to education by almost 20 percent and consolidated federal funding into block grant programs, which some critics have claimed are less efficient than programs before…

Excel Exercises for First-Year Engineering Students

ERIC Educational Resources Information Center

Wagner, Geri

2006-01-01

Several Excel applications are presented which are part of the syllabus in the first semester of engineering studies at Haugesund College. The aim of the applications is for the students to acquire both computing skills and mathematical understanding at the same time. The applications cover numerical solution of equations, differentiation,…

Textbooks for Responsible Data Analysis in Excel

ERIC Educational Resources Information Center

Garrett, Nathan

2015-01-01

With 27 million users, Excel (Microsoft Corporation, Seattle, WA) is the most common business data analysis software. However, audits show that almost all complex spreadsheets have errors. The author examined textbooks to understand why responsible data analysis is taught. A purposeful sample of 10 textbooks was coded, and then compared against…

High-wafer-yield, high-performance vertical cavity surface-emitting lasers

NASA Astrophysics Data System (ADS)

Li, Gabriel S.; Yuen, Wupen; Lim, Sui F.; Chang-Hasnain, Constance J.

1996-04-01

Vertical cavity surface emitting lasers (VCSELs) with very low threshold current and voltage of 340 (mu) A and 1.5 V is achieved. The molecular beam epitaxially grown wafers are grown with a highly accurate, low cost and versatile pre-growth calibration technique. One- hundred percent VCSEL wafer yield is obtained. Low threshold current is achieved with a native oxide confined structure with excellent current confinement. Single transverse mode with stable, predetermined polarization direction up to 18 times threshold is also achieved, due to stable index guiding provided by the structure. This is the highest value reported to data for VCSELs. We have established that p-contact annealing in these devices is crucial for low voltage operation, contrary to the general belief. Uniform doping in the mirrors also appears not to be inferior to complicated doping engineering. With these design rules, very low threshold voltage VCSELs are achieved with very simple growth and fabrication steps.

Estimating variability in grain legume yields across Europe and the Americas

NASA Astrophysics Data System (ADS)

Cernay, Charles; Ben-Ari, Tamara; Pelzer, Elise; Meynard, Jean-Marc; Makowski, David

2015-06-01

Grain legume production in Europe has recently come under scrutiny. Although legume crops are often promoted to provide environmental services, European farmers tend to turn to non-legume crops. It is assumed that high variability in legume yields explains this aversion, but so far this hypothesis has not been tested. Here, we estimate the variability of major grain legume and non-legume yields in Europe and the Americas from yield time series over 1961-2013. Results show that grain legume yields are significantly more variable than non-legume yields in Europe. These differences are smaller in the Americas. Our results are robust at the level of the statistical methods. In all regions, crops with high yield variability are allocated to less than 1% of cultivated areas. Although the expansion of grain legumes in Europe may be hindered by high yield variability, some species display risk levels compatible with the development of specialized supply chains.

Philanthropy and service excellence: what is the connection?

PubMed

Haycock, Camille; Curry, Deanna; Sevilla, Xavier

2014-01-01

Providing person-centered care is a fundamental value and guiding philosophy for all health care delivery across Catholic Health Initiatives. Exceptional service excellence with every patient and family encounter is one way in which this value is demonstrated. The consequences of treating every person with dignity, respect, and a positive attitude can have real benefit on clinical outcomes, individual healing, health system reputation, and financial incentives. In our changing health care landscape, there are now financial motivations to improve patient satisfaction. In addition, a connection can be drawn between our relationships with patients, their experience with an organization, and the subsequent philanthropic and charitable donation to that organization. This article describes one health care system's journey toward improved patient experience through service excellence infrastructure, standard processes, and expected service behaviors.

Interactive effects of pests increase seed yield.

PubMed

Gagic, Vesna; Riggi, Laura Ga; Ekbom, Barbara; Malsher, Gerard; Rusch, Adrien; Bommarco, Riccardo

2016-04-01

Loss in seed yield and therefore decrease in plant fitness due to simultaneous attacks by multiple herbivores is not necessarily additive, as demonstrated in evolutionary studies on wild plants. However, it is not clear how this transfers to crop plants that grow in very different conditions compared to wild plants. Nevertheless, loss in crop seed yield caused by any single pest is most often studied in isolation although crop plants are attacked by many pests that can cause substantial yield losses. This is especially important for crops able to compensate and even overcompensate for the damage. We investigated the interactive impacts on crop yield of four insect pests attacking different plant parts at different times during the cropping season. In 15 oilseed rape fields in Sweden, we estimated the damage caused by seed and stem weevils, pollen beetles, and pod midges. Pest pressure varied drastically among fields with very low correlation among pests, allowing us to explore interactive impacts on yield from attacks by multiple species. The plant damage caused by each pest species individually had, as expected, either no, or a negative impact on seed yield and the strongest negative effect was caused by pollen beetles. However, seed yield increased when plant damage caused by both seed and stem weevils was high, presumably due to the joint plant compensatory reaction to insect attack leading to overcompensation. Hence, attacks by several pests can change the impact on yield of individual pest species. Economic thresholds based on single species, on which pest management decisions currently rely, may therefore result in economically suboptimal choices being made and unnecessary excessive use of insecticides.

[Global funding for papers of excellence on smoking, 2010-2014].

PubMed

Granda-Orive, José Ignacio de; Alonso-Arroyo, Adolfo; García-Río, Francisco; López-Padilla, Daniel E; Solano-Reina, Segismundo; Jiménez-Ruiz, Carlos A; Aleixandre-Benavent, Rafael

2015-11-01

The objective of this study was to investigate the funding received by papers of excellence on smoking at the global level between 2010 and 2014 through the Web of Science, and to find out if funding is associated with greater impact. We searched the Science Citation Index Expanded (SCIE) and the Social Sciences Citation Index (SSCI) through the Web of Science platform on 20 May 2015 (typology consisting of originals and reviews for the period from 2010 to 2014). The search strategy was "smok*" OR "tobac*." To select the papers of excellence, we picked those that had an h index (i.e., number of articles having at least that many citations) from among the papers in the overall sample generated by the strategy. Of the 193 papers of excellence on smoking that were identified, 158 had received funding from 279 different financing institutions that intervened 522 times. The funding came primarily from government agencies, private foundations, and the pharmaceutical industry. Public funding declined and private funding increased over the years included in the analysis. Receipt of funding was not associated with greater impact at a later date. Most of the papers of excellence on smoking received external funding primarily from government agencies, private foundations, and the pharmaceutical industry. Public funding has decreased, while private funding has increased. Receipt of funding was not associated with greater impact at a later date.

Anomalous DD and TT yields relative to the DT yield in inertial-confinement-fusion implosions

NASA Astrophysics Data System (ADS)

Casey, Daniel T.

2011-10-01

Measurements of the D(d,p)T (DD), T(t,2n)4He (TT) and D(t,n)4He (DT) reactions have been conducted using deuterium-tritium gas-filled inertial confinement fusion (ICF) implosions. In these experiments, which were carried out at the OMEGA laser facility, absolute spectral measurements of the DD protons and TT neutrons were conducted and compared to neutron-time-of-flight measured DT-neutron yields. From these measurements, it is concluded that the DD yield is anomalously low and the TT yield is anomalously high relative to the DT yield, an effect that is enhanced with increasing ion temperature. These results can be explained by an enrichment of tritium in the core of an ICF implosion, which may be present in ignition experiments planned on the National Ignition Facility. In addition, the spectral measurements of the TT-neutron spectrum were conducted for the first time at reactant central-mass energies in the range of 15-30 keV. The results from these measurements indicate that the TT reaction proceeds primarily through the direct three-body reaction channel, producing a continuous TT-neutron spectrum in the range 0 - 9.5 MeV. This work was conducted in collaboration with J. A. Frenje, M. Gatu Johnson, M. J.-E. Manuel, H. G. Rinderknecht, N. Sinenian, F. H. Seguin, C. K. Li, R. D. Petrasso, P. B. Radha, J. A. Delettrez, V. Yu Glebov, D. D. Meyerhofer, T. C. Sangster, D. P. McNabb, P. A. Amendt, R. N. Boyd, J. R. Rygg, H. W. Herrmann, Y. H. Kim, G. P. Grim and A. D. Bacher. This work was supported in part by the U.S. Department of Energy (Grant No. DE-FG03-03SF22691), LLE (subcontract Grant No. 412160-001G), LLNL (subcontract Grant No. B504974).

Reducing Excellence Gaps: A Research-Based Model

ERIC Educational Resources Information Center

Plucker, Jonathan A.; Peters, Scott J.; Schmalensee, Stephanie

2017-01-01

As the awareness of the existence and negative effects of excellence gaps has grown among educators and policy makers, so too has a desire for research-supported interventions to reduce these gaps. A recent review of research related to promoting equitable outcomes for all gifted students identified six specific strategies for reducing excellence…

Introduction to 3D Graphics through Excel

ERIC Educational Resources Information Center

Benacka, Jan

2013-01-01

The article presents a method of explaining the principles of 3D graphics through making a revolvable and sizable orthographic parallel projection of cuboid in Excel. No programming is used. The method was tried in fourteen 90 minute lessons with 181 participants, which were Informatics teachers, undergraduates of Applied Informatics and gymnasium…

Using Excel in Teacher Education for Sustainability

ERIC Educational Resources Information Center

Aydin, Serhat

2016-01-01

In this study, the feasibility of using Excel software in teaching whole Basic Statistics Course and its influence on the attitudes of pre-service science teachers towards statistics were investigated. One hundred and two pre-service science teachers in their second year participated in the study. The data were collected from the prospective…

Homework Variety: A Way To Educational Excellence.

ERIC Educational Resources Information Center

Foyle, Harvey C.

Variety in homework is one way to achieve educational excellence in social studies. The twin social studies goals of teaching basic knowledge and teaching reasoning/critical thinking skills are accomplished by providing variety. In accordance with Lee and Pratt's homework taxonomy, homework can be placed under one of the following: preparation,…

The Survey and Analysis of Excellent Senior High School Physics Teachers' Professional Growth Actuality

ERIC Educational Resources Information Center

Sun, Haibin; Liu, Tingting

2010-01-01

Excellent senior high school physics teachers are the backbone power in the new course reform of physics in China. The excellent senior high school physics teachers' professional growth actuality in Shandong is surveyed in this article by the self-made "Questionnaire of Excellent Senior High School Physics Teachers' Professional Growth",…

Achieving Scientific Excellence: An Exploratory Study of the Role of Emotional and Motivational Factors

ERIC Educational Resources Information Center

Araújo, Liliana S.; Cruz, José Fernando A.; Almeida, Leandro S.

2017-01-01

This study investigates the perceived role of psychological factors in achieving excellence in scientific research. Six outstanding scientists aged 33-42 were interviewed. Data were analyzed inductively resulting in three main dimensions: personality traits and characteristics, psychological skills and processes, and task-specific strategies.…

Celebrating excellence in nursing practice.

PubMed

Kennedy, Kimberly A

2008-01-01

The "Nursing Excellence in Practice Awards" encourages nurses to share their research, evidence-based projects, practice innovations, publishing successes, and patient education programs with their colleagues. All projects are presented in poster format, and evaluation teams judge each poster. Cash prizes are awarded to the best projects in each category in this annual Nurses Week celebration. In addition, a pin and certificate are awarded to each participant, and a compendium is printed with the summaries of all projects. The author will describe the planning, funding, educational resources, evaluation criteria, recognition ceremony, and challenges of this program in the community hospital.

Courageous leaders. The integral force behind organizational excellence.

PubMed

Snyder, N H

1995-01-01

For more than a decade, Total Quality Management (TQM) has been used as a powerful instrument in shaping the competitive strategies of businesses, and producing quality products and services has become the credo of firms trying to defend or expand their markets. During this time, we have come to realize that without effective leadership no quality program can succeed. That is why the quality guru, W. Edwards Deming, refused to work in any organization unless he could begin with the CEO. That is why the first criterion examined for the Malcolm Baldridge National Quality Award is leadership. Focusing on quality will not guarantee success in today's rapidly changing markets. Increasingly discriminating consumers have come to expect quality in the products and services they buy, and businesses that fail to deliver it will not survive. In a very real sense, quality performance is the price you must pay simply to play the game. But consumers want more, and satisfying their expectations will determine tomorrow's winners and losers. Building organizations capable of producing superior results that consistently meet the needs of customers is the responsibility of leaders. For this reason, leaders are more important today than they have ever been before. Leaders in successful businesses must show the way for their employees by nurturing "cultures" that encourage and reward superior performance and by exhibiting personal characteristics that inspire excellence. Great leaders possess three crucial characteristics--vision, strong values and beliefs, and the courage to do the job despite seemingly insurmountable obstacles. These characteristics make the difference between excellence and "business as usual."

Characterization of different biological types of steers (cycle IV): wholesale, subprimal, and retail product yields.

PubMed

Wheeler, T L; Cundiff, L V; Koch, R M; Dikeman, M E; Crouse, J D

1997-09-01

Carcass cut-out yields of 888 steers obtained from mating Hereford and Angus cows to Hereford or Angus (HA), Charolais (Ch), Gelbvieh (Gb), Pinzgauer (Pz), Shorthorn (Sh), Galloway (Gw), Longhorn (Lh), Nellore (Ne), Piedmontese (Pm), and Salers (Sa) sires were compared. Data were evaluated at constant age (426 d), carcass weight (324 kg), fat thickness (1.2 cm), fat trim percentage (23%), and marbling (Small(00)) end points. Piedmontese-sired steers excelled in total retail product and fat trim percentages at all slaughter end points except at the 23% fat trim end point. At an age end point, percentage of retail product was greater in steers sired by Continental European breeds (Gb, Ch, Sa, Pz; 63.3 to 65.5% at 0 cm trim) than in steers sired by British breeds (Sh, HA; 60.1 to 61.0%). Piedmontese-sired steers, which were expected to carry one copy of a major gene for muscle hypertrophy, had the highest (P < .05) retail product yields at an age end point (69.7%). At an age end point, although carcass weights were significantly heavier (P < .05) for Charolais-sired steers than for Piedmontese-sired steers, lean growth rate, as reflected by totally trimmed retail product at 426 d, was similar (P > .05) for Piedmontese and Charolais-sired steers. Differences among sire breeds were small for retail product percentage at marbling, fat thickness, and fat trim end points. Ranking of sire breeds for age-constant weight of retail product was as follows: Ch, Pm, Gb, Sa, Ne, Pz, HA, Sh, Gw, and Lh. Sire breed differences in wholesale and subprimal cut yields were similar to total retail product differences. Piedmontese-sired steers produced the most muscular, leanest, and highest-yielding carcasses, and HA- and Sh-sired steers produced the fattest, lowest-yielding carcasses.

Application of CUSA Excel ultrasonic aspiration system in resection of skull base meningiomas

PubMed Central

Tang, Hailiang; Zhang, Haishi; Xie, Qing; Zheng, Mingzhe; Wang, Daijun; Zhu, Hongda; Chen, Xiancheng; Zhou, Liangfu

2014-01-01

Background Here, we introduced our short experience on the application of a new CUSA Excel ultrasonic aspiration system, which was provided by Integra Lifesciences corporation, in skull base meningiomas resection. Methods Ten patients with anterior, middle skull base and sphenoid ridge meningioma were operated using the CUSA Excel ultrasonic aspiration system at the Neurosurgery Department of Shanghai Huashan Hospital from August 2014 to October 2014. There were six male and four female patients, aged from 38 to 61 years old (the mean age was 48.5 years old). Five cases with tumor located at anterior skull base, three cases with tumor on middle skull base, and two cases with tumor on sphenoid ridge. Results All the patents received total resection of meningiomas with the help of this new tool, and the critical brain vessels and nerves were preserved during operations. All the patients recovered well after operation. Conclusions This new CUSA Excel ultrasonic aspiration system has the advantage of preserving vital brain arteries and cranial nerves during skull base meningioma resection, which is very important for skull base tumor operations. This key step would ensure a well prognosis for patients. We hope the neurosurgeons would benefit from this kind of technique. PMID:25561762

Modulus and yield stress of drawn LDPE

NASA Astrophysics Data System (ADS)

Thavarungkul, Nandh

Modulus and yield stress were investigated in drawn low density polyethylene (LDPE) film. Uniaxially drawn polymeric films usually show high values of modulus and yield stress, however, studies have normally only been conducted to identify the structural features that determine modulus. In this study small-angle x-ray scattering (SAXS), thermal shrinkage, birefringence, differential scanning calorimetry (DSC), and dynamic mechanical thermal analysis (DMTA) were used to examine, directly and indirectly, the structural features that determine both modulus and yield stress, which are often closely related in undrawn materials. Shish-kebab structures are proposed to account for the mechanical properties in drawn LDPE. The validity of this molecular/morphological model was tested using relationships between static mechanical data and structural and physical parameters. In addition, dynamic mechanical results are also in line with static data in supporting the model. In the machine direction (MD), "shish" and taut tie molecules (TTM) anchored in the crystalline phase account for E; whereas crystal lamellae with contributions from "shish" and TTM determine yield stress. In the transverse direction (TD), the crystalline phase plays an important roll in both modulus and yield stress. Modulus is determined by crystal lamellae functioning as platelet reinforcing elements in the amorphous matrix with an additional contributions from TTM and yield stress is determined by the crystal lamellae's resistance to deformation.

Maximized exoEarth candidate yields for starshades

NASA Astrophysics Data System (ADS)

Stark, Christopher C.; Shaklan, Stuart; Lisman, Doug; Cady, Eric; Savransky, Dmitry; Roberge, Aki; Mandell, Avi M.

2016-10-01

The design and scale of a future mission to directly image and characterize potentially Earth-like planets will be impacted, to some degree, by the expected yield of such planets. Recent efforts to increase the estimated yields, by creating observation plans optimized for the detection and characterization of Earth-twins, have focused solely on coronagraphic instruments; starshade-based missions could benefit from a similar analysis. Here we explore how to prioritize observations for a starshade given the limiting resources of both fuel and time, present analytic expressions to estimate fuel use, and provide efficient numerical techniques for maximizing the yield of starshades. We implemented these techniques to create an approximate design reference mission code for starshades and used this code to investigate how exoEarth candidate yield responds to changes in mission, instrument, and astrophysical parameters for missions with a single starshade. We find that a starshade mission operates most efficiently somewhere between the fuel- and exposuretime-limited regimes and, as a result, is less sensitive to photometric noise sources as well as parameters controlling the photon collection rate in comparison to a coronagraph. We produced optimistic yield curves for starshades, assuming our optimized observation plans are schedulable and future starshades are not thrust-limited. Given these yield curves, detecting and characterizing several dozen exoEarth candidates requires either multiple starshades or an η≳0.3.

Reducing perceived barriers to nursing homes data entry in the advancing excellence campaign: the role of LANEs (Local Area Networks for Excellence).

PubMed

Bakerjian, Debra; Bonner, Alice; Benner, Carol; Caswell, Cheryl; Weintraub, Alissa; Koren, Mary Jane

2011-09-01

Advancing Excellence (AE) is a coalition-based campaign concerned with how society cares for its elderly and disabled citizens. The purpose of this project was to work with a small group of volunteer nursing homes and with local quality improvement networks called LANEs (Local Area Networks for Excellence) in 6 states in a learning collaborative. The purpose of the collaborative was to determine effective ways for LANEs to address and mitigate perceived barriers to nursing home data entry in the national Advancing Excellence campaign and to test methods by which local quality improvement networks could support nursing homes as they enter data on the AE Web site. A semistructured telephone survey of nursing homes was conducted in 6 states. Participants included LANEs from California, Georgia, Massachusetts, Michigan, Oklahoma, and Washington. Facility characteristics were obtained from a series of questions during the telephone interview. Three states (GA, MA, OK) piloted a new spreadsheet and process for entering data on staff turnover, and 3 states (CA, MI, WA) piloted a new spreadsheet and process for entering data on consistent assignment. Many of the nursing homes we contacted had not entered data for organizational goals on the national Web site, but all were able to do so with telephone assistance from the LANE. Eighty-five percent of nursing homes said they would be able to collect information on advance directives if tools (eg, spreadsheets) were provided. Over 40% of nursing homes, including for-profit homes, were willing to have staff and residents/families enter satisfaction data directly on an independent Web site. Nursing homes were able to convey concerns and questions about the process of goal entry, and offer suggestions to the LANEs during semistructured telephone interviews. The 6 LANEs discussed nursing home responses on their regularly scheduled calls, and useful strategies were shared across states. Nursing homes reported that they are using

The 5 Essentials of Organizational Excellence: Maximizing Schoolwide Student Achievement and Performance.

ERIC Educational Resources Information Center

Marazza, Lawrence L.

This book explores the necessity for building strong relationships among administrators, teachers, parents, and the community by applying what the book calls the five essentials of organizational excellence. The five essentials are planning strategically; benchmarking for excellence; leading collaboratively; engaging the community; and governing…

Sutureless circumcision using 2-Octyl cyanoacrylate results in more rapid and less painful procedures with excellent cosmetic satisfaction.

PubMed

Van Haute, C; Tailly, T; Klockaerts, K; Ringoir, Y

2015-06-01

cosmetic results. This study is the largest study comparing the use of 2-OCA and interrupted sutures in circumcision wound closure. The retrospective character of the study, the lack of a validated questionnaire tool for the cosmetic evaluation and the use of the parent's evaluation are the limitations of this study. The use of 2-OCA in circumcision wound closure results in a shorter operative time, in less postoperative pain, in easy postoperative wound care and in excellent cosmesis when compared to interrupted absorbable sutures. 2-OCA is our current technique of choice in circumcision wound closure. Copyright © 2015 Journal of Pediatric Urology Company. Published by Elsevier Ltd. All rights reserved.

AECT Convention "Third Century Imperative: Excellence in Education"

ERIC Educational Resources Information Center

Audiovisual Instruction, 1977

1977-01-01

AECT Conference Report, Spring 1977, included: (1) First General Session: The Concept of Instructional Development-Evolution or Revolution? (2) Second General Session: AECT's Role in Educational Excellence, and (3) Third General Session: Alex Haley on Roots. (STS)

Development of a business plan for women's health services, using Malcolm Baldrige Performance Excellence Criteria.

PubMed

Caramanica, L; Maxwell, S; Curry, S

2000-06-01

A new process for business planning at Hartford Hospital was needed to achieve critical business results. This article describes the Hospital's use of the Malcolm Baldrige Performance Excellence Criteria as a way to standardize and improve business planning. Women's Health Services is one of Hartford Hospital's "centers for excellence" and one of the first to use these criteria to improve its service. Staff learned how to build their business plan upon a set of core values and concepts such as customer-driven quality, leadership that sets high expectations, continuous improvement and learning, valuing employees, faster response to market demands, management by fact, and a long-range view of the future.

REAL-PANLAR Project for the Implementation and Accreditation of Centers of Excellence in Rheumatoid Arthritis Throughout Latin America: A Consensus Position Paper From REAL-PANLAR Group on Improvement of Rheumatoid Arthritis Care in Latin America Establishing Centers of Excellence.

PubMed

Santos-Moreno, Pedro; Galarza-Maldonado, Claudio; Caballero-Uribe, Carlo V; Cardiel, Mario H; Massardo, Loreto; Soriano, Enrique R; Olano, José Aguilar; Díaz Coto, José F; Durán Pozo, Gabriel R; da Silveira, Inês Guimarães; de Castrejón, Vianna J Khoury; Pérez, Leticia Lino; Méndez Justo, Carlos A; Montufar Guardado, Rubén A; Muños, Rafael; Elvir, Sergio Murillo; Paredes Domínguez, Ernesto R; Pons-Estel, Bernardo; Ríos Acosta, Carlos R; Sandino, Sayonara; Toro Gutiérrez, Carlos E; Villegas de Morales, Sol María; Pineda, Carlos

2015-06-01

A consensus meeting of representatives of 16 Latin American and Caribbean countries and the REAL-PANLAR group met in the city of Bogota to provide recommendations for improving quality of care of patients with rheumatoid arthritis (RA) in Latin America, defining a minimum standards of care and the concept of center of excellence in RA. Twenty-two rheumatologists from 16 Latin American countries with a special interest in quality of care in RA participated in the consensus meeting. Two RA Colombian patients and 2 health care excellence advisors were also invited to the meeting. A RAND-modified Delphi procedure of 5 steps was applied to define categories of centers of excellence. During a 1-day meeting, working groups were created in order to discuss and validate the minimum quality-of-care standards for the 3 proposed types of centers of excellence in RA. Positive votes from at least 60% of the attending leaders were required for the approval of each standard. Twenty-two opinion leaders from the PANLAR countries and the REAL-PANLAR group participated in the discussion and definition of the standards. One hundred percent of the participants agreed with setting up centers of excellence in RA throughout Latin America. Three types of centers of excellence and its criteria were defined, according to indicators of structure, processes, and outcomes: standard, optimal, and model. The standard level should have basic structure and process indicators, the intermediate or optimal level should accomplish more structure and process indicators, and model level should also fulfill outcome indicators and patient experience. This is the first Latin American effort to standardize and harmonize the treatment provided to RA patients and to establish centers of excellence that would offer to RA patients acceptable clinical results and high levels of safety.

A quartz nanopillar hemocytometer for high-yield separation and counting of CD4+ T lymphocytes

NASA Astrophysics Data System (ADS)

Kim, Dong-Joo; Seol, Jin-Kyeong; Wu, Yu; Ji, Seungmuk; Kim, Gil-Sung; Hyung, Jung-Hwan; Lee, Seung-Yong; Lim, Hyuneui; Fan, Rong; Lee, Sang-Kwon

2012-03-01

We report the development of a novel quartz nanopillar (QNP) array cell separation system capable of selectively capturing and isolating a single cell population including primary CD4+ T lymphocytes from the whole pool of splenocytes. Integrated with a photolithographically patterned hemocytometer structure, the streptavidin (STR)-functionalized-QNP (STR-QNP) arrays allow for direct quantitation of captured cells using high content imaging. This technology exhibits an excellent separation yield (efficiency) of ~95.3 +/- 1.1% for the CD4+ T lymphocytes from the mouse splenocyte suspensions and good linear response for quantitating captured CD4+ T-lymphoblasts, which is comparable to flow cytometry and outperforms any non-nanostructured surface capture techniques, i.e. cell panning. This nanopillar hemocytometer represents a simple, yet efficient cell capture and counting technology and may find immediate applications for diagnosis and immune monitoring in the point-of-care setting.We report the development of a novel quartz nanopillar (QNP) array cell separation system capable of selectively capturing and isolating a single cell population including primary CD4+ T lymphocytes from the whole pool of splenocytes. Integrated with a photolithographically patterned hemocytometer structure, the streptavidin (STR)-functionalized-QNP (STR-QNP) arrays allow for direct quantitation of captured cells using high content imaging. This technology exhibits an excellent separation yield (efficiency) of ~95.3 +/- 1.1% for the CD4+ T lymphocytes from the mouse splenocyte suspensions and good linear response for quantitating captured CD4+ T-lymphoblasts, which is comparable to flow cytometry and outperforms any non-nanostructured surface capture techniques, i.e. cell panning. This nanopillar hemocytometer represents a simple, yet efficient cell capture and counting technology and may find immediate applications for diagnosis and immune monitoring in the point-of-care setting

Climate change and maize yield in Iowa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Hong; Twine, Tracy E.; Girvetz, Evan

Climate is changing across the world, including the major maize-growing state of Iowa in the USA. To maintain crop yields, farmers will need a suite of adaptation strategies, and choice of strategy will depend on how the local to regional climate is expected to change. Here we predict how maize yield might change through the 21 st century as compared with late 20 th century yields across Iowa, USA, a region representing ideal climate and soils for maize production that contributes substantially to the global maize economy. To account for climate model uncertainty, we drive a dynamic ecosystem model withmore » output from six climate models and two future climate forcing scenarios. Despite a wide range in the predicted amount of warming and change to summer precipitation, all simulations predict a decrease in maize yields from late 20 th century to middle and late 21 st century ranging from 15% to 50%. Linear regression of all models predicts a 6% state-averaged yield decrease for every 1°C increase in warm season average air temperature. When the influence of moisture stress on crop growth is removed from the model, yield decreases either remain the same or are reduced, depending on predicted changes in warm season precipitation. Lastly, our results suggest that even if maize were to receive all the water it needed, under the strongest climate forcing scenario yields will decline by 10-20% by the end of the 21 st century.« less

Climate change and maize yield in Iowa

DOE PAGES

Xu, Hong; Twine, Tracy E.; Girvetz, Evan

2016-05-24

Climate is changing across the world, including the major maize-growing state of Iowa in the USA. To maintain crop yields, farmers will need a suite of adaptation strategies, and choice of strategy will depend on how the local to regional climate is expected to change. Here we predict how maize yield might change through the 21 st century as compared with late 20 th century yields across Iowa, USA, a region representing ideal climate and soils for maize production that contributes substantially to the global maize economy. To account for climate model uncertainty, we drive a dynamic ecosystem model withmore » output from six climate models and two future climate forcing scenarios. Despite a wide range in the predicted amount of warming and change to summer precipitation, all simulations predict a decrease in maize yields from late 20 th century to middle and late 21 st century ranging from 15% to 50%. Linear regression of all models predicts a 6% state-averaged yield decrease for every 1°C increase in warm season average air temperature. When the influence of moisture stress on crop growth is removed from the model, yield decreases either remain the same or are reduced, depending on predicted changes in warm season precipitation. Lastly, our results suggest that even if maize were to receive all the water it needed, under the strongest climate forcing scenario yields will decline by 10-20% by the end of the 21 st century.« less

Tutorial: simulating chromatography with Microsoft Excel Macros.

PubMed

Kadjo, Akinde; Dasgupta, Purnendu K

2013-04-22

Chromatography is one of the cornerstones of modern analytical chemistry; developing an instinctive feeling for how chromatography works will be invaluable to future generation of chromatographers. Specialized software programs exist that handle and manipulate chromatographic data; there are also some that simulate chromatograms. However, the algorithm details of such software are not transparent to a beginner. In contrast, how spreadsheet tools like Microsoft Excel™ work is well understood and the software is nearly universally available. We show that the simple repetition of an equilibration process at each plate (a spreadsheet row) followed by discrete movement of the mobile phase down by a row, easily automated by a subroutine (a "Macro" in Excel), readily simulates chromatography. The process is readily understood by a novice. Not only does this permit simulation of isocratic and simple single step gradient elution, linear or multistep gradients are also easily simulated. The versatility of a transparent and easily understandable computational platform further enables the simulation of complex but commonly encountered chromatographic scenarios such as the effects of nonlinear isotherms, active sites, column overloading, on-column analyte degradation, etc. These are not as easily simulated by available software. Views of the separation as it develops on the column and as it is seen by an end-column detector are both available in real time. Excel 2010™ also permits a 16-level (4-bit) color gradation of numerical values in a column/row; this permits visualization of a band migrating down the column, much as Tswett may have originally observed, but in a numerical domain. All parameters of relevance (partition constants, elution conditions, etc.) are readily changed so their effects can be examined. Illustrative Excel spreadsheets are given in the Supporting Information; these are easily modified by the user or the user can write his/her own routine. Copyright

The First Year of Beacon School Status: Maintaining Excellence and Sharing Success.

ERIC Educational Resources Information Center

Burton, Neil; Brundrett, Mark

2000-01-01

During summer 1998, the British government's Department for Education and Employment recognized 74 schools as model "beacons of excellence." A recent survey reveals that effective communication, coupled with a clear sense of purpose and vision, has enabled Beacon schools to maintain educational excellence while facilitating other…

Synthesis of u-channelled spherical Fex(CoyNi1-y)100-x Janus colloidal particles with excellent electromagnetic wave absorption performance.

PubMed

Li, Hao; Cao, Zhenming; Lin, Jiayao; Zhao, Hui; Jiang, Qiaorong; Jiang, Zhiyuan; Liao, Honggang; Kuang, Qin; Xie, Zhaoxiong

2018-01-25

Due to their distinctive structure, inherently anisotropic properties and broad applications, Janus colloidal particles have attracted tremendous attention and it is significant to synthesize high yield Janus colloidal particles in a cost-effective and reliable way. On the other hand, due to the expanded electromagnetic interference problems, it is highly desired to develop excellent electromagnetic wave absorbing materials with an ultra-wide absorption bandwidth for practical application. Herein, a confined liquid-solid redox reaction strategy has been developed to fabricate a series of Fe x (Co y Ni 1-y ) 100-x ternary alloy particles. The as-prepared particles are in the form of u-channelled noncentrosymmetric spheres, one kind of Janus colloidal particles which have been rarely observed. Due to the combination and synergy effects of multi-magnetic metals, the polycrystalline structure and their specific morphology, the as-prepared particles possess multiple magnetic resonance and multiple dielectric relaxation processes, and therefore show excellent electromagnetic wave absorption performances. In particular, the strongest reflection loss (RL) of the Fe 15 (Co 0.2 Ni 0.8 ) 85 Janus colloidal particles is up to -36.9 dB with a thickness of 2.5 mm, and the effective absorption (RL < -10 dB) bandwidth can reach 9.2 GHz (8-17.2 GHz) with a thickness of 2 mm. Such a wide bandwidth has barely been reported for magnetic metal alloys under a single thickness. These results suggest that the Fe x (Co y Ni 1-y ) 100-x Janus particles could be a promising candidate for highly efficient electromagnetic wave absorbing materials for practical application.

Measurements of branching fraction ratios and CP-asymmetries in suppressed B{sup -}{yields}D({yields}K{sup +}{pi}{sup -})K{sup -} and B{sup -}{yields}D({yields}K{sup +}{pi}{sup -}){pi}{sup -} decays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aaltonen, T.; Brucken, E.; Devoto, F.

2011-11-01

We report the first reconstruction in hadron collisions of the suppressed decays B{sup -}{yields}D({yields}K{sup +}{pi}{sup -})K{sup -} and B{sup -}{yields}D({yields}K{sup +}{pi}{sup -}){pi}{sup -}, sensitive to the Cabibbo-Kobayashi-Maskawa phase {gamma}, using data from 7 fb{sup -1} of integrated luminosity collected by the CDF II detector at the Tevatron collider. We reconstruct a signal for the B{sup -}{yields}D({yields}K{sup +}{pi}{sup -})K{sup -} suppressed mode with a significance of 3.2 standard deviations, and measure the ratios of the suppressed to favored branching fractions R(K)=[22.0{+-}8.6(stat){+-}2.6(syst)]x10{sup -3}, R{sup +}(K)=[42.6{+-}13.7(stat){+-}2.8(syst)]x10{sup -3}, R{sup -}(K)=[3.8{+-}10.3(stat){+-}2.7(syst)]x10{sup -3} as well as the direct CP-violating asymmetry A(K)=-0.82{+-}0.44(stat){+-}0.09(syst) of this mode. Corresponding quantitiesmore » for B{sup -}{yields}D({yields}K{sup +}{pi}{sup -}){pi}{sup -} decay are also reported.« less

High yield fabrication of fluorescent nanodiamonds

PubMed Central

Boudou, Jean-Paul; Curmi, Patrick; Jelezko, Fedor; Wrachtrup, Joerg; Aubert, Pascal; Sennour, Mohamed; Balasubramanian, Gopalakrischnan; Reuter, Rolf; Thorel, Alain; Gaffet, Eric

2009-01-01

A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties. PMID:19451687

Blackleg (Leptosphaeria maculans) Severity and Yield Loss in Canola in Alberta, Canada

PubMed Central

Hwang, Sheau-Fang; Strelkov, Stephen E.; Peng, Gary; Ahmed, Hafiz; Zhou, Qixing; Turnbull, George

2016-01-01

Blackleg, caused by Leptosphaeria maculans, is an important disease of oilseed rape (Brassica napus L.) in Canada and throughout the world. Severe epidemics of blackleg can result in significant yield losses. Understanding disease-yield relationships is a prerequisite for measuring the agronomic efficacy and economic benefits of control methods. Field experiments were conducted in 2013, 2014, and 2015 to determine the relationship between blackleg disease severity and yield in a susceptible cultivar and in moderately resistant to resistant canola hybrids. Disease severity was lower, and seed yield was 120%–128% greater, in the moderately resistant to resistant hybrids compared with the susceptible cultivar. Regression analysis showed that pod number and seed yield declined linearly as blackleg severity increased. Seed yield per plant decreased by 1.8 g for each unit increase in disease severity, corresponding to a decline in yield of 17.2% for each unit increase in disease severity. Pyraclostrobin fungicide reduced disease severity in all site-years and increased yield. These results show that the reduction of blackleg in canola crops substantially improves yields. PMID:27447676

Matlab-Excel Interface for OpenDSS

DOE Office of Scientific and Technical Information (OSTI.GOV)

The software allows users of the OpenDSS grid modeling software to access their load flow models using a GUI interface developed in MATLAB. The circuit definitions are entered into a Microsoft Excel spreadsheet which makes circuit creation and editing a much simpler process than the basic text-based editors used in the native OpenDSS interface. Plot tools have been developed which can be accessed through a MATLAB GUI once the desired parameters have been simulated.

District Awards for Teacher Excellence: Research Brief

ERIC Educational Resources Information Center

National Center on Performance Incentives, 2010

2010-01-01

Since 2008 Texas's District Awards for Teacher Excellence (D.A.T.E.) program has provided grants to districts for the implementation of locally designed incentive pay plans. The 2010-11 school year is the third year of the D.A.T.E. incentive pay plans with approximately $197 million in annual state funding. This research brief summarizes the key…

ExcelAutomat: a tool for systematic processing of files as applied to quantum chemical calculations

NASA Astrophysics Data System (ADS)

Laloo, Jalal Z. A.; Laloo, Nassirah; Rhyman, Lydia; Ramasami, Ponnadurai

2017-07-01

The processing of the input and output files of quantum chemical calculations often necessitates a spreadsheet as a key component of the workflow. Spreadsheet packages with a built-in programming language editor can automate the steps involved and thus provide a direct link between processing files and the spreadsheet. This helps to reduce user-interventions as well as the need to switch between different programs to carry out each step. The ExcelAutomat tool is the implementation of this method in Microsoft Excel (MS Excel) using the default Visual Basic for Application (VBA) programming language. The code in ExcelAutomat was adapted to work with the platform-independent open-source LibreOffice Calc, which also supports VBA. ExcelAutomat provides an interface through the spreadsheet to automate repetitive tasks such as merging input files, splitting, parsing and compiling data from output files, and generation of unique filenames. Selected extracted parameters can be retrieved as variables which can be included in custom codes for a tailored approach. ExcelAutomat works with Gaussian files and is adapted for use with other computational packages including the non-commercial GAMESS. ExcelAutomat is available as a downloadable MS Excel workbook or as a LibreOffice workbook.

ExcelAutomat: a tool for systematic processing of files as applied to quantum chemical calculations.

PubMed

Laloo, Jalal Z A; Laloo, Nassirah; Rhyman, Lydia; Ramasami, Ponnadurai

2017-07-01

The processing of the input and output files of quantum chemical calculations often necessitates a spreadsheet as a key component of the workflow. Spreadsheet packages with a built-in programming language editor can automate the steps involved and thus provide a direct link between processing files and the spreadsheet. This helps to reduce user-interventions as well as the need to switch between different programs to carry out each step. The ExcelAutomat tool is the implementation of this method in Microsoft Excel (MS Excel) using the default Visual Basic for Application (VBA) programming language. The code in ExcelAutomat was adapted to work with the platform-independent open-source LibreOffice Calc, which also supports VBA. ExcelAutomat provides an interface through the spreadsheet to automate repetitive tasks such as merging input files, splitting, parsing and compiling data from output files, and generation of unique filenames. Selected extracted parameters can be retrieved as variables which can be included in custom codes for a tailored approach. ExcelAutomat works with Gaussian files and is adapted for use with other computational packages including the non-commercial GAMESS. ExcelAutomat is available as a downloadable MS Excel workbook or as a LibreOffice workbook.

ITMO Photonics: center of excellence

NASA Astrophysics Data System (ADS)

Voznesenskaya, Anna; Bougrov, Vladislav; Kozlov, Sergey; Vasilev, Vladimir

2016-09-01

ITMO University, the leading Russian center in photonics research and education, has the mission to train highlyqualified competitive professionals able to act in conditions of fast-changing world. This paradigm is implemented through creation of a strategic academic unit ITMO Photonics, the center of excellence concentrating organizational, scientific, educational, financial, laboratory and human resources. This Center has the following features: dissemination of breakthrough scientific results in photonics such as advanced photonic materials, ultrafast optical and quantum information, laser physics, engineering and technologies, into undergraduate and graduate educational programs through including special modules into the curricula and considerable student's research and internships; transformation of the educational process in accordance with the best international educational practices, presence in the global education market in the form of joint educational programs with leading universities, i.e. those being included in the network programs of international scientific cooperation, and international accreditation of educational programs; development of mechanisms for the commercialization of innovative products - results of scientific research; securing financial sustainability of research in the field of photonics of informationcommunication systems via funding increase and the diversification of funding sources. Along with focusing on the research promotion, the Center is involved in science popularization through such projects as career guidance for high school students; interaction between student's chapters of international optical societies; invited lectures of World-famous experts in photonics; short educational programs in optics, photonics and light engineering for international students; contests, Olympics and grants for talented young researchers; social events; interactive demonstrations.

Color matters--material ejection and ion yields in UV-MALDI mass spectrometry as a function of laser wavelength and laser fluence.

PubMed

Soltwisch, Jens; Jaskolla, Thorsten W; Dreisewerd, Klaus

2013-10-01

The success of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) as a widely employed analytical tool in the biomolecular sciences builds strongly on an effective laser-material interaction that is resulting in a soft co-desorption and ionization of matrix and imbedded biomolecules. To obtain a maximized ion yield for the analyte(s) of interest, in general both wavelength and fluence need to be tuned to match the specific optical absorption profile of the used matrix. However, commonly only lasers with fixed emission wavelengths of either 337 or 355 nm are used for MALDI-MS. Here, we employed a wavelength-tunable dye laser and recorded both the neutral material ejection and the MS ion data in a wide wavelength and fluence range between 280 and 377.5 nm. α-Cyano-4-hydroxycinnamic acid (HCCA), 4-chloro-α-cyanocinnamic acid (ClCCA), α-cyano-2,4-difluorocinnamic acid (DiFCCA), and 2,5-dihydroxybenzoic acid (DHB) were investigated as matrices, and several peptides as analytes. Recording of the material ejection was achieved by adopting a photoacoustic approach. Relative ion yields were derived by division of photoacoustic and ion signals. In this way, distinct wavelength/fluence regions can be identified for which maximum ion yields were obtained. For the tested matrices, optimal results were achieved for wavelengths corresponding to areas of high optical absorption of the respective matrix and at fluences about a factor of 2-3 above the matrix- and wavelength-dependent ion detection threshold fluences. The material ejection as probed by the photoacoustic method is excellently fitted by the quasithermal model, while a sigmoidal function allows for an empirical description of the ion signal-fluence relationship.

High-yield maize with large net energy yield and small global warming intensity

PubMed Central

Grassini, Patricio; Cassman, Kenneth G.

2012-01-01

Addressing concerns about future food supply and climate change requires management practices that maximize productivity per unit of arable land while reducing negative environmental impact. On-farm data were evaluated to assess energy balance and greenhouse gas (GHG) emissions of irrigated maize in Nebraska that received large nitrogen (N) fertilizer (183 kg of N⋅ha−1) and irrigation water inputs (272 mm or 2,720 m3 ha−1). Although energy inputs (30 GJ⋅ha−1) were larger than those reported for US maize systems in previous studies, irrigated maize in central Nebraska achieved higher grain and net energy yields (13.2 Mg⋅ha−1 and 159 GJ⋅ha−1, respectively) and lower GHG-emission intensity (231 kg of CO2e⋅Mg−1 of grain). Greater input-use efficiencies, especially for N fertilizer, were responsible for better performance of these irrigated systems, compared with much lower-yielding, mostly rainfed maize systems in previous studies. Large variation in energy inputs and GHG emissions across irrigated fields in the present study resulted from differences in applied irrigation water amount and imbalances between applied N inputs and crop N demand, indicating potential to further improve environmental performance through better management of these inputs. Observed variation in N-use efficiency, at any level of applied N inputs, suggests that an N-balance approach may be more appropriate for estimating soil N2O emissions than the Intergovernmental Panel on Climate Change approach based on a fixed proportion of applied N. Negative correlation between GHG-emission intensity and net energy yield supports the proposition that achieving high yields, large positive energy balance, and low GHG emissions in intensive cropping systems are not conflicting goals. PMID:22232684

78 FR 16471 - National Cybersecurity Center of Excellence (NCCoE) Secure Exchange of Electronic Health...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-15

...-02] National Cybersecurity Center of Excellence (NCCoE) Secure Exchange of Electronic Health...) National Cybersecurity Center of Excellence (NCCoE) invited organizations to provide products and technical.... companies to enter into ``National Cybersecurity Excellence Partnerships'' (NCEPs) in furtherance of the...

A Comparison of Organizational Climate and Nurses’ Intention to Leave Among Excellence Awarded Hospitals and Other Hospitals in 2013

PubMed Central

Mohamadzadeh Nojehdehi, Maryam; Ashgholi Farahani, Mansoureh; Rafii, Forough; Bahrani, Nasser

2015-01-01

Background: Human resource is the most important factor of performance, success and better revelation of excellence goals of each organization. By performing excellence plan, healthcare organizations improve their organizational climate and play a valuable role in retaining nurses and improving the quality of their services to patients. Objectives: The aim of this study was to compare hospital organizational climate and intention to leave among working nurses in hospitals performing the excellence plan and other hospitals of Tehran University of Medical Sciences. Patients and Methods: This was a cross-sectional descriptive comparison study. Its population included 248 nurses of the hospitals performing the excellence plan and other hospitals of Tehran University of Medical Sciences in Iran selected by random sampling. The used instrument had three parts: the first part was related to personal characteristics, the second part was the Munn’s organizational climate questionnaire and the third part was Hinshaw’s questionnaire of “anticipated turnover scale”. Data was analyzed using SPSS software, version 17 and indices of descriptive statistics and inferential statistics. Results: The results of the mean and standard deviation for organizational climate and intention to leave in both performing and non-performing hospitals of the organizational excellence plan were respectively (65.28 ± 19.31 and 56.42 ± 21.36) and (33.64 ± 5.58 and 35.59 ± 4.94). Independent T test revealed a significant difference between the mean scores for organizational climate in both performing and non-performing hospitals, and also a significant difference between the mean scores for intention to leave in both performing and non-performing hospitals (P = 0.004). Moreover, Pearson Correlation test showed a reverse significant correlation between organizational climate and intention to leave in performing hospitals of the organizational excellence plan (r = -0.337) and non

Is there any link between accreditation programs and the models of organizational excellence?

PubMed

Berssaneti, Fernando Tobal; Saut, Ana Maria; Barakat, Májida Farid; Calarge, Felipe Araujo

2016-01-01

To evaluate whether accredited health organizations perform better management practices than non-accredited ones. The study was developed in two stages: a literature review, and a study of multiple cases in 12 healthcare organizations in the state of São Paulo, Brazil. It surveyed articles comparing hospital accreditation with the EFQM (European Foundation for Quality Management) model of excellence in management. According to the pertinent literature, the accreditation model and the EFQM model are convergent and supplementary in some aspects. With 99% confidence, one can say that there is evidence that accredited organizations scored better in the evaluation based on the EFQM model in comparison to non-accredited organizations. This result was also confirmed in the comparison of results between the categories Facilitators and Results in the EFQM model. There is convergence between the accreditation model and the EFQM excellence model, suggesting that accreditation helps the healthcare sector to implement the best management practices already used by other business sectors. Avaliar se as organizações de saúde acreditadas possuem melhores práticas de gestão do que as não acreditadas. A pesquisa foi dividida em duas etapas: revisão da literatura e estudo de casos múltiplos com 12 organizações de saúde, localizadas no estado de São Paulo ‒ Brasil. Foram pesquisados artigos que comparavam a acreditação hospitalar com o modelo de excelência em gestão da EFQM (European Foundation for Quality Management), sendo que a literatura pertinente considera que o modelo de acreditação e o modelo da EFQM são convergentes e, ao mesmo tempo, complementares em determinados aspectos. Com 99% de confiança, pode-se afirmar que há evidência de que as organizações com acreditação obtiveram uma pontuação maior na avaliação baseada no modelo EFQM comparativamente às organizações não acreditadas. Este resultado também se confirmou na comparação dos

Predicting red meat yields in carcasses from beef-type and calf-fed Holstein steers using the United States Department of Agriculture calculated yield grade.

PubMed

Lawrence, T E; Elam, N A; Miller, M F; Brooks, J C; Hilton, G G; VanOverbeke, D L; McKeith, F K; Killefer, J; Montgomery, T H; Allen, D M; Griffin, D B; Delmore, R J; Nichols, W T; Streeter, M N; Yates, D A; Hutcheson, J P

2010-06-01

Analyses were conducted to evaluate the ability of the USDA yield grade equation to detect differences in subprimal yield of beef-type steers and calf-fed Holstein steers that had been fed zilpaterol hydrochloride (ZH; Intervet Inc., Millsboro, DE) as well as those that had not been fed ZH. Beef-type steer (n = 801) and calf-fed Holstein steer (n = 235) carcasses were fabricated into subprimal cuts and trim. Simple correlations between calculated yield grades and total red meat yields ranged from -0.56 to -0.62 for beef-type steers. Reliable correlations from calf-fed Holstein steers were unobtainable; the probability of a type I error met or exceeded 0.39. Linear models were developed for the beef-type steers to predict total red meat yield based on calculated USDA yield grade within each ZH duration. At an average calculated USDA yield grade of 2.9, beef-type steer carcasses that had not been fed ZH had an estimated 69.4% red meat yield, whereas those fed ZH had an estimated 70.7% red meat yield. These results indicate that feeding ZH increased red meat yield by 1.3% at a constant calculated yield grade. However, these data also suggest that the calculated USDA yield grade score is a poor and variable estimator (adjusted R(2) of 0.31 to 0.38) of total red meat yield of beef-type steer carcasses, regardless of ZH feeding. Moreover, no relationship existed (adjusted R(2) of 0.00 to 0.01) for calf-fed Holstein steer carcasses, suggesting the USDA yield grade is not a valid estimate of calf-fed Holstein red meat yield.

Controlled-rate freezer cryopreservation of highly concentrated peripheral blood mononuclear cells results in higher cell yields and superior autologous T-cell stimulation for dendritic cell-based immunotherapy.

PubMed

Buhl, Timo; Legler, Tobias J; Rosenberger, Albert; Schardt, Anke; Schön, Michael P; Haenssle, Holger A

2012-11-01

Availability of large quantities of functionally effective dendritic cells (DC) represents one of the major challenges for immunotherapeutic trials against infectious or malignant diseases. Low numbers or insufficient T-cell activation of DC may result in premature termination of treatment and unsatisfying immune responses in clinical trials. Based on the notion that cryopreservation of monocytes is superior to cryopreservation of immature or mature DC in terms of resulting DC quantity and immuno-stimulatory capacity, we aimed to establish an optimized protocol for the cryopreservation of highly concentrated peripheral blood mononuclear cells (PBMC) for DC-based immunotherapy. Cryopreserved cell preparations were analyzed regarding quantitative recovery, viability, phenotype, and functional properties. In contrast to standard isopropyl alcohol (IPA) freezing, PBMC cryopreservation in an automated controlled-rate freezer (CRF) with subsequent thawing and differentiation resulted in significantly higher cell yields of immature and mature DC. Immature DC yields and total protein content after using CRF were comparable with results obtained with freshly prepared PBMC and exceeded results of standard IPA freezing by approximately 50 %. While differentiation markers, allogeneic T-cell stimulation, viability, and cytokine profiles were similar to DC from standard freezing procedures, DC generated from CRF-cryopreserved PBMC induced a significantly higher antigen-specific IFN-γ release from autologous effector T cells. In summary, automated controlled-rate freezing of highly concentrated PBMC represents an improved method for increasing DC yields and autologous T-cell stimulation.

Models of Excellence: A Review of Ohio's Award-Winning Workplace Literacy Programs. Alliance for Workforce Excellence Publication #94-01.

ERIC Educational Resources Information Center

Proper, Len

This report summarizes the 18 programs that have received Governor's Workforce Excellence Awards in Ohio over the past 3 years. The 18 award winning programs (based in companies employing from 75 to 16,000 employees) focus on the basic literacy, thinking, and personal skills that every Ohio worker must possess. They were selected from nearly 100…

Understanding Solubility through Excel Spreadsheets

NASA Astrophysics Data System (ADS)

Brown, Pamela

2001-02-01

This article describes assignments related to the solubility of inorganic salts that can be given in an introductory general chemistry course. Le Châtelier's principle, solubility, unit conversion, and thermodynamics are tied together to calculate heats of solution by two methods: heats of formation and an application of the van't Hoff equation. These assignments address the need for math, graphing, and computer skills in the chemical technology program by developing skill in the use of Microsoft Excel to prepare spreadsheets and graphs and to perform linear and nonlinear curve-fitting. Background information on the value of understanding and predicting solubility is provided.

Inoculation of Schizolobium parahyba with Mycorrhizal Fungi and Plant Growth-Promoting Rhizobacteria Increases Wood Yield under Field Conditions.

PubMed

Cely, Martha V T; Siviero, Marco A; Emiliano, Janaina; Spago, Flávia R; Freitas, Vanessa F; Barazetti, André R; Goya, Erika T; Lamberti, Gustavo de Souza; Dos Santos, Igor M O; De Oliveira, Admilton G; Andrade, Galdino

2016-01-01

Schizolobium parahyba var. amazonicum (Huber ex Ducke) occurs naturally in the Brazilian Amazon. Currently, it is being planted extensively because of its fast growth and excellent use in forestry. Consequently, there is great interest in new strategies to increase wood production. The interaction between soil microorganisms and plants, specifically in the roots, provides essential nutrients for plant growth. These interactions can have growth-promoting effects. In this way, this study assessed the effect of the inoculation with arbuscular mycorrhizal fungi (AMF) and plant growth-promoting rhizobacteria (PGPR) on growth of S. parahyba var. amazonicum under field conditions. We used two native species of arbuscular mycorrhizal fungi, Claroideoglomus etunicatum (Ce), and Acaulospora sp. (Ac); two native strains of Rhizobium sp. (Rh1 and Rh2); and a non-native strain of Burkholderia sp. Different combinations of microorganisms were supplemented with chemical fertilizers (doses D1 and D2) in two planting methods, seed sowing and seedling planting. In seed sowing, the results showed that treatments with Ce/Rh1/Fertilizer D2 and Ac/No PGPR/Fertilizer D2 increased wood yield. In seedling planting, two combinations (Ac/Rh2/Fertilizer D1 and Ac/Rh1/Fertilizer D1) were more effective in increasing seedling growth. In these experiments, inoculation with AMF and PGPR increased wood yield by about 20% compared to the application of fertilizer alone.

Inoculation of Schizolobium parahyba with Mycorrhizal Fungi and Plant Growth-Promoting Rhizobacteria Increases Wood Yield under Field Conditions

PubMed Central

Cely, Martha V. T.; Siviero, Marco A.; Emiliano, Janaina; Spago, Flávia R.; Freitas, Vanessa F.; Barazetti, André R.; Goya, Erika T.; Lamberti, Gustavo de Souza; dos Santos, Igor M. O.; De Oliveira, Admilton G.; Andrade, Galdino

2016-01-01

Schizolobium parahyba var. amazonicum (Huber ex Ducke) occurs naturally in the Brazilian Amazon. Currently, it is being planted extensively because of its fast growth and excellent use in forestry. Consequently, there is great interest in new strategies to increase wood production. The interaction between soil microorganisms and plants, specifically in the roots, provides essential nutrients for plant growth. These interactions can have growth-promoting effects. In this way, this study assessed the effect of the inoculation with arbuscular mycorrhizal fungi (AMF) and plant growth-promoting rhizobacteria (PGPR) on growth of S. parahyba var. amazonicum under field conditions. We used two native species of arbuscular mycorrhizal fungi, Claroideoglomus etunicatum (Ce), and Acaulospora sp. (Ac); two native strains of Rhizobium sp. (Rh1 and Rh2); and a non-native strain of Burkholderia sp. Different combinations of microorganisms were supplemented with chemical fertilizers (doses D1 and D2) in two planting methods, seed sowing and seedling planting. In seed sowing, the results showed that treatments with Ce/Rh1/Fertilizer D2 and Ac/No PGPR/Fertilizer D2 increased wood yield. In seedling planting, two combinations (Ac/Rh2/Fertilizer D1 and Ac/Rh1/Fertilizer D1) were more effective in increasing seedling growth. In these experiments, inoculation with AMF and PGPR increased wood yield by about 20% compared to the application of fertilizer alone. PMID:27920781

Yield performance and stability of CMS-based triticale hybrids.

PubMed

Mühleisen, Jonathan; Piepho, Hans-Peter; Maurer, Hans Peter; Reif, Jochen Christoph

2015-02-01

CMS-based triticale hybrids showed only marginal midparent heterosis for grain yield and lower dynamic yield stability compared to inbred lines. Hybrids of triticale (×Triticosecale Wittmack) are expected to possess outstanding yield performance and increased dynamic yield stability. The objectives of the present study were to (1) examine the optimum choice of the biometrical model to compare yield stability of hybrids versus lines, (2) investigate whether hybrids exhibit a more pronounced grain yield performance and yield stability, and (3) study optimal strategies to predict yield stability of hybrids. Thirteen female and seven male parental lines and their 91 factorial hybrids as well as 30 commercial lines were evaluated for grain yield in up to 20 environments. Hybrids were produced using a cytoplasmic male sterility (CMS)-inducing cytoplasm that originated from Triticumtimopheevii Zhuk. We found that the choice of the biometrical model can cause contrasting results and concluded that a group-by-environment interaction term should be added to the model when estimating stability variance of hybrids and lines. midparent heterosis for grain yield was on average 3 % with a range from -15.0 to 11.5 %. No hybrid outperformed the best inbred line. Hybrids had, on average, lower dynamic yield stability compared to the inbred lines. Grain yield performance of hybrids could be predicted based on midparent values and general combining ability (GCA)-predicted values. In contrast, stability variance of hybrids could be predicted only based on GCA-predicted values. We speculated that negative effects of the used CMS cytoplasm might be the reason for the low performance and yield stability of the hybrids. For this purpose a detailed study on the reasons for the drawback of the currently existing CMS system in triticale is urgently required comprising also the search of potentially alternative hybridization systems.

A Path to Excellence in Public Higher Education in Florida. Report of the Regents' Study Commission on Funding for Excellence.

ERIC Educational Resources Information Center

Florida State Board of Regents, Tallahassee.

A report on creative approaches to educational funding for the Florida University System is presented by the Study Commission on Funding for Excellence. The focus is public finance, management efficiency, and private funding and marketing. Recommendations are offered on: faculty and support staff salaries, public-private partnership, matching…

Educating for Vocational Excellence: The Auto/Biographical Exploration of Enacted Craft Pedagogy

ERIC Educational Resources Information Center

Tyson, Ruhi

2015-01-01

The focus of this article is on education for vocational excellence (the combination of virtue and good judgment or phronesis/practical wisdom) through an examination of episodes from the auto/biographical study of master craftsman Wolfgang B. Vocational excellence is an issue sometimes discussed with regard to teacher training for schools and…

Redesigning Schools to Reach Every Student with Excellent Teachers: Financial Planning Summary

ERIC Educational Resources Information Center

Public Impact, 2012

2012-01-01

This brief summarizes the ways that schools and their teachers can simultaneously reach more students with excellent teaching, expand teachers' career opportunities, and sustainably fund higher pay and other priorities. This is based on Public Impact's school models that use job redesign and technology to extend the reach of excellent teachers to…

Covariance Matrix Evaluations for Independent Mass Fission Yields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Terranova, N., E-mail: nicholas.terranova@unibo.it; Serot, O.; Archier, P.

2015-01-15

Recent needs for more accurate fission product yields include covariance information to allow improved uncertainty estimations of the parameters used by design codes. The aim of this work is to investigate the possibility to generate more reliable and complete uncertainty information on independent mass fission yields. Mass yields covariances are estimated through a convolution between the multi-Gaussian empirical model based on Brosa's fission modes, which describe the pre-neutron mass yields, and the average prompt neutron multiplicity curve. The covariance generation task has been approached using the Bayesian generalized least squared method through the CONRAD code. Preliminary results on mass yieldsmore » variance-covariance matrix will be presented and discussed from physical grounds in the case of {sup 235}U(n{sub th}, f) and {sup 239}Pu(n{sub th}, f) reactions.« less

Gervais High School: 100% Committed to Excellence

ERIC Educational Resources Information Center

Principal Leadership, 2013

2013-01-01

Gervais High School--with a senior class of 80 and a total enrollment of 337--may be small in size compared to its neighbors, but it has demonstrated over the last four years the ability to think big in pursuit of excellence. A decade ago, Gervais had a well-earned reputation in Oregon's Willamette Valley as a drug-ridden, gang-infested school…

Influence of yield surface curvature on the macroscopic yielding and ductile failure of isotropic porous plastic materials

NASA Astrophysics Data System (ADS)

Dæhli, Lars Edvard Bryhni; Morin, David; Børvik, Tore; Hopperstad, Odd Sture

2017-10-01

Numerical unit cell models of an approximative representative volume element for a porous ductile solid are utilized to investigate differences in the mechanical response between a quadratic and a non-quadratic matrix yield surface. A Hershey equivalent stress measure with two distinct values of the yield surface exponent is employed as the matrix description. Results from the unit cell calculations are further used to calibrate a heuristic extension of the Gurson model which incorporates effects of the third deviatoric stress invariant. An assessment of the porous plasticity model reveals its ability to describe the unit cell response to some extent, however underestimating the effect of the Lode parameter for the lower triaxiality ratios imposed in this study when compared to unit cell simulations. Ductile failure predictions by means of finite element simulations using a unit cell model that resembles an imperfection band are then conducted to examine how the non-quadratic matrix yield surface influences the failure strain as compared to the quadratic matrix yield surface. Further, strain localization predictions based on bifurcation analyses and imperfection band analyses are undertaken using the calibrated porous plasticity model. These simulations are then compared to the unit cell calculations in order to elucidate the differences between the various modelling strategies. The current study reveals that strain localization analyses using an imperfection band model and a spatially discretized unit cell are in reasonable agreement, while the bifurcation analyses predict higher strain levels at localization. Imperfection band analyses are finally used to calculate failure loci for the quadratic and the non-quadratic matrix yield surface under a wide range of loading conditions. The underlying matrix yield surface is demonstrated to have a pronounced influence on the onset of strain localization.

Xenon Sputter Yield Measurements for Ion Thruster Materials

NASA Technical Reports Server (NTRS)

Williams, John D.; Gardner, Michael M.; Johnson, Mark L.; Wilbur, Paul J.

2003-01-01

In this paper, we describe a technique that was used to measure total and differential sputter yields of materials important to high specific impulse ion thrusters. The heart of the technique is a quartz crystal monitor that is swept at constant radial distance from a small target region where a high current density xenon ion beam is aimed. Differential sputtering yields were generally measured over a full 180 deg arc in a plane that included the beam centerline and the normal vector to the target surface. Sputter yield results are presented for a xenon ion energy range from 0.5 to 10 keV and an angle of incidence range from 0 deg to 70 deg from the target surface normal direction for targets consisting of molybdenum, titanium, solid (Poco) graphite, and flexible graphite (grafoil). Total sputter yields are calculated using a simple integration procedure and comparisons are made to sputter yields obtained from the literature. In general, the agreement between the available data is good. As expected for heavy xenon ions, the differential and total sputter yields are found to be strong functions of angle of incidence. Significant under- and over-cosine behavior is observed at low- and high-ion energies, respectively. In addition, strong differences in differential yield behavior are observed between low-Z targets (C and Ti) and high-Z targets (Mo). Curve fits to the differential sputter yield data are provided. They should prove useful to analysts interested in predicting the erosion profiles of ion thruster components and determining where the erosion products re-deposit.

ExCEL in Social Work: Excellence in Cancer Education & Leadership: An Oncology Social Work Response to the 2008 Institute of Medicine Report.

PubMed

Otis-Green, Shirley; Jones, Barbara; Zebrack, Brad; Kilburn, Lisa; Altilio, Terry A; Ferrell, Betty

2015-09-01

ExCEL in Social Work: Excellence in Cancer Education & Leadership was a multi-year National Cancer Institute (NCI)-funded grant for the development and implementation of an innovative educational program for oncology social workers. The program's curriculum focused upon six core competencies of psychosocial-spiritual support necessary to meet the standard of care recommended by the 2008 Institute of Medicine (IOM) Report: Cancer Care for the Whole Patient: Meeting Psychosocial Health Needs. The curriculum was delivered through a collaborative partnership between the City of Hope National Medical Center and the two leading professional organizations devoted exclusively to representing oncology social workers--the Association of Oncology Social Work and the Association of Pediatric Oncology Social Workers. Initial findings support the feasibility and acceptability of this tailored leadership skills-building program for participating oncology social workers.

Against "Teaching Excellence": Ideology, Commodification, and Enabling the Neoliberalization of Postsecondary Education

ERIC Educational Resources Information Center

Saunders, Daniel B.; Blanco Ramírez, Gerardo

2017-01-01

In this article, the notion of excellence in relation to teaching is removed from its privileged place in order to render it, and its implications, for analysis. We argue that teaching excellence needs to be understood in the larger context of the neoliberal university in which competition is taken for granted, and therefore, metrics for…

Pumsy in Pursuit of Excellence and Self-Concept of Second Grade Students.

ERIC Educational Resources Information Center

Burkholder, Janiece

This practicum evaluated the effects a self-esteem program, Pumsy in Pursuit of Excellence, which was implemented by the elementary school counselor with second grade students (N=65). Forty-five second grade students comprised the control group. The Pumsy in Pursuit of Excellence Units include: (1) Pumsy Decides; (2) If Only Things Were Different;…

Developing Competitive Excellence in the Talented Female Athlete.

ERIC Educational Resources Information Center

Wildenhaus, Kevin J.

1995-01-01

This article reviews the historical development of female participation in sports, then identifies the unique issues associated with women's struggles for athletic acceptance and competitive excellence. Topics discussed include talent recognition and development, sex roles and socialization, physiology and maturation, coaching the female athlete,…

Bioactive bredigite coating with improved bonding strength, rapid apatite mineralization and excellent cytocompatibility.

PubMed

Yi, Deliang; Wu, Chengtie; Ma, Bing; Ji, Heng; Zheng, Xuebin; Chang, Jiang

2014-05-01

Previous studies have shown that bredigite (Ca7MgSi4O16) bioceramics possessed excellent biocompatibility, apatite-mineralization ability and mechanical properties. In this paper, the bredigite coating on Ti-6Al-4 V substrate was prepared by plasma spraying technique. The main compositions of the coating were bredigite crystal phase with small parts of amorphous phases. The bonding strength of the coating to Ti-6Al-4 V substrate reached 49.8 MPa, which was significantly higher than that of hydroxyapatite coating and other silicate-based bioceramic coatings prepared by same method. After immersed in simulated body fluid for 2 days, a distinct apatite layer was deposited on the surface of bredigite coating, indicating that the prepared bredigite coating has excellent apatite-mineralization ability. The prepared bredigite coating supported the attachment and proliferation of rabbit bone marrow stem cells. The proliferation level of bone marrow stem cells was significantly higher than that on the hydroxyapatite coating. Our further study showed that the released SiO4 (4-) and Mg(2+) ions from bredigite coating as well as the formed nano-apatite layer on the coating surface might mainly contribute to the improvement of cell proliferation. The results indicated that the bredigite coating may be applied on orthopedic implants due to its excellent bonding strength, apatite mineralization and cytocompatibility.

Ovulation Statuses of Surrogate Gilts Are Associated with the Efficiency of Excellent Pig Cloning.

PubMed

Huan, Yanjun; Hu, Kui; Xie, Bingteng; Shi, Yongqian; Wang, Feng; Zhou, Yang; Liu, Shichao; Huang, Bo; Zhu, Jiang; Liu, Zhongfeng; He, Yilong; Li, Jingyu; Kong, Qingran; Liu, Zhonghua

2015-01-01

Somatic cell nuclear transfer (SCNT) is an assisted reproductive technique that can produce multiple copies of excellent livestock. However, low cloning efficiency limits the application of SCNT. In this study, we systematically investigated the major influencing factors related to the overall cloning efficiency in pigs. Here, 13620 cloned embryos derived from excellent pigs were transferred into 79 surrogate gilts, and 119 live cloned piglets were eventually generated. During cloning, group of cloned embryos derived from excellent Landrace or Large white pigs presented no significant differences of cleavage and blastocyst rates, blastocyst cell numbers, surrogate pregnancy and delivery rates, average numbers of piglets born and alive and cloning efficiencies, and group of 101-150, 151-200 or 201-250 cloned embryos transferred per surrogate also displayed a similar developmental efficiency. When estrus stage of surrogate gilts was compared, group of embryo transfer on Day 2 of estrus showed significantly higher pregnancy rate, delivery rate, average number of piglets born, average alive piglet number or cloning efficiency than group on Day 1, Day 3, Day 4 or Day 5, respectively (P<0.05). And, in comparison with the preovulation and postovulation groups, group of surrogate gilts during periovulation displayed a significantly higher overall cloning efficiency (P<0.05). Further investigation of surrogate estrus stage and ovulation status displayed that ovulation status was the real factor underlying estrus stage to determine the overall cloning efficiency. And more, follicle puncture for preovulation, not transfer position shallowed for preovulation or deepened for postovulation, significantly improved the average number of piglets alive and cloning efficiency (P<0.05). In conclusion, our results demonstrated that ovulation status of surrogate gilts was the fundamental factor determining the overall cloning efficiency of excellent pigs, and follicle puncture, not

Ovulation Statuses of Surrogate Gilts Are Associated with the Efficiency of Excellent Pig Cloning

PubMed Central

Huan, Yanjun; Hu, Kui; Xie, Bingteng; Shi, Yongqian; Wang, Feng; Zhou, Yang; Liu, Shichao; Huang, Bo; Zhu, Jiang; Liu, Zhongfeng; He, Yilong; Li, Jingyu; Kong, Qingran; Liu, Zhonghua

2015-01-01

Somatic cell nuclear transfer (SCNT) is an assisted reproductive technique that can produce multiple copies of excellent livestock. However, low cloning efficiency limits the application of SCNT. In this study, we systematically investigated the major influencing factors related to the overall cloning efficiency in pigs. Here, 13620 cloned embryos derived from excellent pigs were transferred into 79 surrogate gilts, and 119 live cloned piglets were eventually generated. During cloning, group of cloned embryos derived from excellent Landrace or Large white pigs presented no significant differences of cleavage and blastocyst rates, blastocyst cell numbers, surrogate pregnancy and delivery rates, average numbers of piglets born and alive and cloning efficiencies, and group of 101–150, 151–200 or 201–250 cloned embryos transferred per surrogate also displayed a similar developmental efficiency. When estrus stage of surrogate gilts was compared, group of embryo transfer on Day 2 of estrus showed significantly higher pregnancy rate, delivery rate, average number of piglets born, average alive piglet number or cloning efficiency than group on Day 1, Day 3, Day 4 or Day 5, respectively (P<0.05). And, in comparison with the preovulation and postovulation groups, group of surrogate gilts during periovulation displayed a significantly higher overall cloning efficiency (P<0.05). Further investigation of surrogate estrus stage and ovulation status displayed that ovulation status was the real factor underlying estrus stage to determine the overall cloning efficiency. And more, follicle puncture for preovulation, not transfer position shallowed for preovulation or deepened for postovulation, significantly improved the average number of piglets alive and cloning efficiency (P<0.05). In conclusion, our results demonstrated that ovulation status of surrogate gilts was the fundamental factor determining the overall cloning efficiency of excellent pigs, and follicle puncture

Mistaken Identifiers: Gene name errors can be introduced inadvertently when using Excel in bioinformatics

PubMed Central

Zeeberg, Barry R; Riss, Joseph; Kane, David W; Bussey, Kimberly J; Uchio, Edward; Linehan, W Marston; Barrett, J Carl; Weinstein, John N

2004-01-01

Background When processing microarray data sets, we recently noticed that some gene names were being changed inadvertently to non-gene names. Results A little detective work traced the problem to default date format conversions and floating-point format conversions in the very useful Excel program package. The date conversions affect at least 30 gene names; the floating-point conversions affect at least 2,000 if Riken identifiers are included. These conversions are irreversible; the original gene names cannot be recovered. Conclusions Users of Excel for analyses involving gene names should be aware of this problem, which can cause genes, including medically important ones, to be lost from view and which has contaminated even carefully curated public databases. We provide work-arounds and scripts for circumventing the problem. PMID:15214961

Efficient SRAM yield optimization with mixture surrogate modeling

NASA Astrophysics Data System (ADS)

Zhongjian, Jiang; Zuochang, Ye; Yan, Wang

2016-12-01

Largely repeated cells such as SRAM cells usually require extremely low failure-rate to ensure a moderate chi yield. Though fast Monte Carlo methods such as importance sampling and its variants can be used for yield estimation, they are still very expensive if one needs to perform optimization based on such estimations. Typically the process of yield calculation requires a lot of SPICE simulation. The circuit SPICE simulation analysis accounted for the largest proportion of time in the process yield calculation. In the paper, a new method is proposed to address this issue. The key idea is to establish an efficient mixture surrogate model. The surrogate model is based on the design variables and process variables. This model construction method is based on the SPICE simulation to get a certain amount of sample points, these points are trained for mixture surrogate model by the lasso algorithm. Experimental results show that the proposed model is able to calculate accurate yield successfully and it brings significant speed ups to the calculation of failure rate. Based on the model, we made a further accelerated algorithm to further enhance the speed of the yield calculation. It is suitable for high-dimensional process variables and multi-performance applications.

Laboratory-based teaching and the Physics Innovations Centre for Excellence in Teaching and Learning

NASA Astrophysics Data System (ADS)

Lambourne, Robert

2007-05-01

Developments in the laboratory-based teaching of physics and astronomy are resulting from the collaboration between conventional and distance teaching universities. The collaboration, piCETL, is one of the Centres for Excellence in Teaching and Learning established as a result of a broad initiative by the Higher Education Funding Council for England. The initiative, the piCETL collaboration and some of its work on laboratory-based teaching are all described.

Generic Gold Standard or Contextualised Public Good? Teaching Excellence Awards in Post-Colonial South Africa

ERIC Educational Resources Information Center

Behari-Leak, Kasturi; McKenna, Sioux

2017-01-01

Teaching Excellence Awards have raised the profile of teaching as a scholarly project. There are however a number of questions about what constitutes teaching excellence and how "excellence" is understood in current higher education. In a post-colonial South Africa, where significant injustices permeate our society, we question whether…

Quantitative thermodynamic predication of interactions between nucleic acid and non-nucleic acid species using Microsoft excel.

PubMed

Zou, Jiaqi; Li, Na

2013-09-01

Proper design of nucleic acid sequences is crucial for many applications. We have previously established a thermodynamics-based quantitative model to help design aptamer-based nucleic acid probes by predicting equilibrium concentrations of all interacting species. To facilitate customization of this thermodynamic model for different applications, here we present a generic and easy-to-use platform to implement the algorithm of the model with Microsoft(®) Excel formulas and VBA (Visual Basic for Applications) macros. Two Excel spreadsheets have been developed: one for the applications involving only nucleic acid species, the other for the applications involving both nucleic acid and non-nucleic acid species. The spreadsheets take the nucleic acid sequences and the initial concentrations of all species as input, guide the user to retrieve the necessary thermodynamic constants, and finally calculate equilibrium concentrations for all species in various bound and unbound conformations. The validity of both spreadsheets has been verified by comparing the modeling results with the experimental results on nucleic acid sequences reported in the literature. This Excel-based platform described here will allow biomedical researchers to rationalize the sequence design of nucleic acid probes using the thermodynamics-based modeling even without relevant theoretical and computational skills. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Linear System of Equations, Matrix Inversion, and Linear Programming Using MS Excel

ERIC Educational Resources Information Center

El-Gebeily, M.; Yushau, B.

2008-01-01

In this note, we demonstrate with illustrations two different ways that MS Excel can be used to solve Linear Systems of Equation, Linear Programming Problems, and Matrix Inversion Problems. The advantage of using MS Excel is its availability and transparency (the user is responsible for most of the details of how a problem is solved). Further, we…

Earthquake prediction; new studies yield promising results

USGS Publications Warehouse

Robinson, R.

1974-01-01

On Agust 3, 1973, a small earthquake (magnitude 2.5) occurred near Blue Mountain Lake in the Adirondack region of northern New York State. This seemingly unimportant event was of great significance, however, because it was predicted. Seismologsits at the Lamont-Doherty geologcal Observatory of Columbia University accurately foretold the time, place, and magnitude of the event. Their prediction was based on certain pre-earthquake processes that are best explained by a hypothesis known as "dilatancy," a concept that has injected new life and direction into the science of earthquake prediction. Although much mroe reserach must be accomplished before we can expect to predict potentially damaging earthquakes with any degree of consistency, results such as this indicate that we are on a promising road. 

Bumps on the road to Magnet designation: achieving organizational excellence.

PubMed

Steinbinder, Amy

2009-01-01

The chief nursing officer is in a unique position to guide his or her organization to excellence by creating a compelling vision; maintaining objectivity regarding the nursing department's accomplishments; holding senior nurse leaders accountable as Magnet champions; demonstrating strategic thinking, business planning development, operational connection, and awareness of clinical aspects of care; and establishing levels of ownership and decision making within the nursing department's operational framework. The clear definition of terms including responsibility, authority, delegation, accountability, and empowerment are necessary and, coupled with specific actions, skills, and measures of success, guide individual and group processes to achieve organizational excellence and ultimately Magnet designation.

Effects of Management Practices on Meloidogyne incognita and Snap Bean Yield.

PubMed

Smittle, D A; Johnson, A W

1982-01-01

Phenamiphos applied at 6.7 kg ai/ha through a solid set or a center pivot irrigation system with 28 mm of water effectively controlled root-knot nematodes, Meloidogyne incognita, and resulted in greater snap bean growth and yields irrespective of growing season, tillage method, or cover crop system. The percentage yield increases attributed to this method of M. incognita control over nontreated controls were 45% in the spring crop, and 90% and 409% in the fall crops following winter rye and fallow, respectively. Root galling was not affected by tillage systems or cover crop, but disk tillage resulted in over 50% reduction in bean yield compared with yields from the subsoil-bed tillage system.

Calculation of K-shell fluorescence yields for low-Z elements

NASA Astrophysics Data System (ADS)

Nekkab, M.; Kahoul, A.; Deghfel, B.; Aylikci, N. Küp; Aylikçi, V.

2015-03-01

The analytical methods based on X-ray fluorescence are advantageous for practical applications in a variety of fields including atomic physics, X-ray fluorescence surface chemical analysis and medical research and so the accurate fluorescence yields (ωK) are required for these applications. In this contribution we report a new parameters for calculation of K-shell fluorescence yields (ωK) of elements in the range of 11≤Z≤30. The experimental data are interpolated by using the famous analytical function (ωk/(1 -ωk)) 1 /q (were q=3, 3.5 and 4) vs Z to deduce the empirical K-shell fluorescence yields. A comparison is made between the results of the procedures followed here and those theoretical and other semi-empirical fluorescence yield values. Reasonable agreement was typically obtained between our result and other works.

Relating outcomes to excellent nursing practice.

PubMed

Allen, Diane E; Bockenhauer, Barbarajo; Egan, Carolyn; Kinnaird, Leah S

2006-03-01

Healthcare professionals must find ways to accelerate the diffusion of knowledge within their organizations. Although nurses have extraordinary access to patient care data, they may underestimate their roles as data managers and innovators of change, and relinquish control of data to others. The authors discuss how nurses at an acute psychiatric hospital collect and report their own data to show the direct relationship between outcomes and excellence in nursing practice. Knowledge that is gained through practice is shared to inspire and sustain needed changes.

NASA's Suborbital Center of Excellence - reaching young minds and crafting the future

NASA Astrophysics Data System (ADS)

Cathey, H.; Hottman, S.; Hansen, K.

The NASA Suborbital Center of Excellence is charting new territory. From an idea to promote science and engineering education and outreach, the Suborbital Center of Excellence is working toward the objective of increasing numbers of college graduates choosing a career in suborbital programs. Approaches to excite university students to want to pursue these careers through relevant and useful work experiences will be highlighted. Suborbital platforms include balloons, sounding rockets, research aircraft (manned and remotely piloted vehicles) and small satellites. Key components of this are the Suborbital Center of Excellence co-op program and the support of Engineering ``Capstone'' projects. A number of these projects and programs have been supported during the past year. Highlights of these student hands-on learning experiences will be presented. The projects have included diverse projects ranging from work on a power beaming demonstration and autonomous aircraft control logic to the development of light weight pressure vessels for balloon flights based on ULDB spin-off technology, and balloon drop sonde development. Preparing these future Scientists and Engineers involves the investment of time, energy, and resources. The Suborbital Center of Excellence is uniquely positioned to do this. Future programs and initiatives will be presented. The Suborbital Center of Excellence is evolving, meeting the needs to promote science and engineering education and outreach. Educational outreach initiatives for young children to university students will also be presented. These include hands-on experiments, demonstrations, and suborbital educational materials.

Climate change impacts on crop yield: evidence from China.

PubMed

Wei, Taoyuan; Cherry, Todd L; Glomrød, Solveig; Zhang, Tianyi

2014-11-15

When estimating climate change impact on crop yield, a typical assumption is constant elasticity of yield with respect to a climate variable even though the elasticity may be inconstant. After estimating both constant and inconstant elasticities with respect to temperature and precipitation based on provincial panel data in China 1980-2008, our results show that during that period, the temperature change contributes positively to total yield growth by 1.3% and 0.4% for wheat and rice, respectively, but negatively by 12% for maize. The impacts of precipitation change are marginal. We also compare our estimates with other studies and highlight the implications of the inconstant elasticities for crop yield, harvest and food security. We conclude that climate change impact on crop yield would not be an issue in China if positive impacts of other socio-economic factors continue in the future. Copyright © 2014 Elsevier B.V. All rights reserved.

Weight Loss and Glycemic Control after Sleeve Gastrectomy: Results from a Middle Eastern Center of Excellence.

PubMed

Al Khalifa, Khalid; Al Ansari, Ahmed; Showaiter, May

2018-02-01

Obesity and its associated metabolic disorders are strongly linked to both morbidity and mortality. Sleeve gastrectomy (SG) has been established as an effective means of weight loss for obese patients as well as a treatment for type 2 diabetes mellitus (T2DM). This study was designed to examine the short- and midterm outcomes of patients who underwent SG in a Middle Eastern Center of Excellence, a military training teaching hospital. The clinical outcomes of 59 patients with impaired glucose tolerance and T2DM who underwent SG between 2011 and 2014 with at least one and up to four years of follow-up were studied. Data were collected and compared, including the pre- and post-surgery measures of weight, body mass index, glycosylated hemoglobin (HbA1c), and fasting blood glucose. Complete remission was defined as a fasting blood glucose level ≤100 mg/dL, an HbA1c ≤6 mg/dL, without use of antidiabetic medications. All patients showed significant reduction in body mass index following SG. Tight glycemic control was achieved among both diabetic and prediabetic patients. In this study, 88.14 per cent of all patients (diabetic and prediabetic) achieved complete resolution from their impaired glucose tolerance and T2DM and maintained normal blood glucose and HbA1C levels from one to four years postoperatively. SG is beneficial both in terms of short- and midterm weight loss and glucose control in both diabetic and prediabetic obese patients.

EPA Recognizes Excellence and Innovation in Clean Water Infrastructure

EPA Pesticide Factsheets

Today, the U.S. Environmental Protection Agency recognized 28 clean water infrastructure projects for excellence & innovation within the Clean Water State Revolving Fund (CWSRF) program. Honored projects include large wastewater infrastructure projects.

Specific Yield--Column drainage and centrifuge moisture content

USGS Publications Warehouse

Johnson, A.I.; Prill, R.C.; Morris, D.A.

1963-01-01

The specific yield of a rock or soil, with respect to water, is the ratio of (1) the volume of water which, after being saturated, it will yield by gravity to (2) its own volume. Specific retention represents the water retained against gravity drainage. The specific yield and retention when added together are equal to the total interconnected porosity of the rock or soil. Because specific retention is more easily determined than specific yield, most methods for obtaining yield first require the determination of specific retention. Recognizing the great need for developing improved methods of determining the specific yield of water-bearing materials, the U.S. Geological Survey and the California Department of Water Resources initiated a cooperative investigation of this subject. The major objectives of this research are (1) to review pertinent literature on specific yield and related subjects, (2) to increase basic knowledge of specific yield and rate of drainage and to determine the most practical methods of obtaining them, (3) to compare and to attempt to correlate the principal laboratory and field methods now commonly used to obtain specific yield, and (4) to obtain improved estimates of specific yield of water-bearing deposits in California. An open-file report, 'Specific yield of porous media, an annotated bibliography,' by A. I. Johnson, D. A. Morris, and R. C. Prill, was released in 1960 in partial fulfillment of the first objective. This report describes the second phase of the specific-yield study by the U.S. Geological Survey Hydrologic Laboratory at Denver, Colo. Laboratory research on column drainage and centrifuge moisture equivalent, two methods for estimating specific retention of porous media, is summarized. In the column-drainage study, a wide variety of materials was packed into plastic columns of 1- to 8-inch diameter, wetted with Denver tap water, and drained under controlled conditions of temperature and humidity. The effects of cleaning the

On-line prediction of yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score using the MARC beef carcass image analysis system.

PubMed

Shackelford, S D; Wheeler, T L; Koohmaraie, M

2003-01-01

The present experiment was conducted to evaluate the ability of the U.S. Meat Animal Research Center's beef carcass image analysis system to predict calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score under commercial beef processing conditions. In two commercial beef-processing facilities, image analysis was conducted on 800 carcasses on the beef-grading chain immediately after the conventional USDA beef quality and yield grades were applied. Carcasses were blocked by plant and observed calculated yield grade. The carcasses were then separated, with 400 carcasses assigned to a calibration data set that was used to develop regression equations, and the remaining 400 carcasses assigned to a prediction data set used to validate the regression equations. Prediction equations, which included image analysis variables and hot carcass weight, accounted for 90, 88, 90, 88, and 76% of the variation in calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score, respectively, in the prediction data set. In comparison, the official USDA yield grade as applied by online graders accounted for 73% of the variation in calculated yield grade. The technology described herein could be used by the beef industry to more accurately determine beef yield grades; however, this system does not provide an accurate enough prediction of marbling score to be used without USDA grader interaction for USDA quality grading.

Fission yield calculation using toy model based on Monte Carlo simulation

NASA Astrophysics Data System (ADS)

Jubaidah, Kurniadi, Rizal

2015-09-01

Toy model is a new approximation in predicting fission yield distribution. Toy model assumes nucleus as an elastic toy consist of marbles. The number of marbles represents the number of nucleons, A. This toy nucleus is able to imitate the real nucleus properties. In this research, the toy nucleons are only influenced by central force. A heavy toy nucleus induced by a toy nucleon will be split into two fragments. These two fission fragments are called fission yield. In this research, energy entanglement is neglected. Fission process in toy model is illustrated by two Gaussian curves intersecting each other. There are five Gaussian parameters used in this research. They are scission point of the two curves (Rc), mean of left curve (μL) and mean of right curve (μR), deviation of left curve (σL) and deviation of right curve (σR). The fission yields distribution is analyses based on Monte Carlo simulation. The result shows that variation in σ or µ can significanly move the average frequency of asymmetry fission yields. This also varies the range of fission yields distribution probability. In addition, variation in iteration coefficient only change the frequency of fission yields. Monte Carlo simulation for fission yield calculation using toy model successfully indicates the same tendency with experiment results, where average of light fission yield is in the range of 90yield is in about 135

Lumber grade-yields for factory-grade northern red oak sawlogs

Treesearch

James G. Schroeder; Leland F. Hanks

1967-01-01

A report on results of sawing 556 northern red oak sawlogs at four sawmills in West Virginia and Virginia, and the distribution of grades for the standard factory lumber produced. Tabular data on actual yield and curved grade-yield percentages.

A Microsoft-Excel-based tool for running and critically appraising network meta-analyses—an overview and application of NetMetaXL

PubMed Central

2014-01-01

Background The use of network meta-analysis has increased dramatically in recent years. WinBUGS, a freely available Bayesian software package, has been the most widely used software package to conduct network meta-analyses. However, the learning curve for WinBUGS can be daunting, especially for new users. Furthermore, critical appraisal of network meta-analyses conducted in WinBUGS can be challenging given its limited data manipulation capabilities and the fact that generation of graphical output from network meta-analyses often relies on different software packages than the analyses themselves. Methods We developed a freely available Microsoft-Excel-based tool called NetMetaXL, programmed in Visual Basic for Applications, which provides an interface for conducting a Bayesian network meta-analysis using WinBUGS from within Microsoft Excel. . This tool allows the user to easily prepare and enter data, set model assumptions, and run the network meta-analysis, with results being automatically displayed in an Excel spreadsheet. It also contains macros that use NetMetaXL’s interface to generate evidence network diagrams, forest plots, league tables of pairwise comparisons, probability plots (rankograms), and inconsistency plots within Microsoft Excel. All figures generated are publication quality, thereby increasing the efficiency of knowledge transfer and manuscript preparation. Results We demonstrate the application of NetMetaXL using data from a network meta-analysis published previously which compares combined resynchronization and implantable defibrillator therapy in left ventricular dysfunction. We replicate results from the previous publication while demonstrating result summaries generated by the software. Conclusions Use of the freely available NetMetaXL successfully demonstrated its ability to make running network meta-analyses more accessible to novice WinBUGS users by allowing analyses to be conducted entirely within Microsoft Excel. NetMetaXL also allows

[Contrast of Z-Pinch X-Ray Yield Measure Technique].

PubMed

Li, Mo; Wang, Liang-ping; Sheng, Liang; Lu, Yi

2015-03-01

Resistive bolometer and scintillant detection system are two mainly Z-pinch X-ray yield measure techniques which are based on different diagnostic principles. Contrasting the results from two methods can help with increasing precision of X-ray yield measurement. Experiments with different load material and shape were carried out on the "QiangGuang-I" facility. For Al wire arrays, X-ray yields measured by the two techniques were largely consistent. However, for insulating coating W wire arrays, X-ray yields taken from bolometer changed with load parameters while data from scintillant detection system hardly changed. Simulation and analysis draw conclusions as follows: (1) Scintillant detection system is much more sensitive to X-ray photons with low energy and its spectral response is wider than the resistive bolometer. Thus, results from the former method are always larger than the latter. (2) The responses of the two systems are both flat to Al plasma radiation. Thus, their results are consistent for Al wire array loads. (3) Radiation form planar W wire arrays is mainly composed of sub-keV soft X-ray. X-ray yields measured by the bolometer is supposed to be accurate because of the nickel foil can absorb almost all the soft X-ray. (4) By contrast, using planar W wire arrays, data from scintillant detection system hardly change with load parameters. A possible explanation is that while the distance between wires increases, plasma temperature at stagnation reduces and spectra moves toward the soft X-ray region. Scintillator is much more sensitive to the soft X-ray below 200 eV. Thus, although the total X-ray yield reduces with large diameter load, signal from the scintillant detection system is almost the same. (5) Both Techniques affected by electron beams produced by the loads.

CXTFIT/Excel A modular adaptable code for parameter estimation, sensitivity analysis and uncertainty analysis for laboratory or field tracer experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, Guoping; Mayes, Melanie; Parker, Jack C

2010-01-01

We implemented the widely used CXTFIT code in Excel to provide flexibility and added sensitivity and uncertainty analysis functions to improve transport parameter estimation and to facilitate model discrimination for multi-tracer experiments on structured soils. Analytical solutions for one-dimensional equilibrium and nonequilibrium convection dispersion equations were coded as VBA functions so that they could be used as ordinary math functions in Excel for forward predictions. Macros with user-friendly interfaces were developed for optimization, sensitivity analysis, uncertainty analysis, error propagation, response surface calculation, and Monte Carlo analysis. As a result, any parameter with transformations (e.g., dimensionless, log-transformed, species-dependent reactions, etc.) couldmore » be estimated with uncertainty and sensitivity quantification for multiple tracer data at multiple locations and times. Prior information and observation errors could be incorporated into the weighted nonlinear least squares method with a penalty function. Users are able to change selected parameter values and view the results via embedded graphics, resulting in a flexible tool applicable to modeling transport processes and to teaching students about parameter estimation. The code was verified by comparing to a number of benchmarks with CXTFIT 2.0. It was applied to improve parameter estimation for four typical tracer experiment data sets in the literature using multi-model evaluation and comparison. Additional examples were included to illustrate the flexibilities and advantages of CXTFIT/Excel. The VBA macros were designed for general purpose and could be used for any parameter estimation/model calibration when the forward solution is implemented in Excel. A step-by-step tutorial, example Excel files and the code are provided as supplemental material.« less

Surface-restrained growth of vertically aligned carbon nanotube arrays with excellent thermal transport performance.

PubMed

Ping, Linquan; Hou, Peng-Xiang; Liu, Chang; Li, Jincheng; Zhao, Yang; Zhang, Feng; Ma, Chaoqun; Tai, Kaiping; Cong, Hongtao; Cheng, Hui-Ming

2017-06-22

A vertically aligned carbon nanotube (VACNT) array is a promising candidate for a high-performance thermal interface material in high-power microprocessors due to its excellent thermal transport property. However, its rough and entangled free tips always cause poor interfacial contact, which results in serious contact resistance dominating the total thermal resistance. Here, we employed a thin carbon cover to restrain the disorderly growth of the free tips of a VACNT array. As a result, all the free tips are seamlessly connected by this thin carbon cover and the top surface of the array is smoothed. This unique structure guarantees the participation of all the carbon nanotubes in the array in the heat transport. Consequently the VACNT array grown on a Cu substrate shows a record low thermal resistance of 0.8 mm 2 K W -1 including the two-sided contact resistances, which is 4 times lower than the best result previously reported. Remarkably, the VACNT array can be easily peeled away from the Cu substrate and act as a thermal pad with excellent flexibility, adhesive ability and heat transport capability. As a result the CNT array with a thin carbon cover shows great potential for use as a high-performance flexible thermal interface material.

Vocal fold motion outcome based on excellent prognosis with laryngeal electromyography.

PubMed

Smith, Libby J; Rosen, Clark A; Munin, Michael C

2016-10-01

As laryngeal electromyography (LEMG) becomes more refined, accurate predictions of vocal fold motion recovery are possible. Focus has been on outcomes for patients with poor prognosis for vocal fold motion recovery. Limited information is available regarding the expected rate of purposeful vocal fold motion recovery when there is good to normal motor recruitment, no signs of denervation, and no signs of synkinetic activity with LEMG, termed excellent prognosis. The objective of this study is to determine the rate of vocal fold motion recovery with excellent prognosis findings on LEMG after acute recurrent laryngeal nerve injury. Retrospective review. Patients undergoing a standardized LEMG protocol, consisting of qualitative (evaluation of motor recruitment, motor unit configuration, detection of fibrillations, presence of synkinesis) and quantitative (turns analysis) measurements were evaluated for purposeful vocal-fold motion recovery, calculated after at least 6 months since onset of injury. Twenty-three patients who underwent LEMG for acute vocal fold paralysis met the inclusion criteria of excellent prognosis. Eighteen patients (78.3%) recovered vocal fold motion, as determined by flexible laryngoscopy. Nearly 80% of patients determined to have excellent prognosis for vocal fold motion recovery experienced return of vocal fold motion. This information will help clinicians not only counsel their patients on expectations but will also help guide treatment. 4. Laryngoscope, 126:2310-2314, 2016. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Yield estimation of corn with multispectral data and the potential of using imaging spectrometers

NASA Astrophysics Data System (ADS)

Bach, Heike

1997-05-01

In the frame of the special yield estimation, a regular procedure conducted for the European Union to more accurately estimate agricultural yield, a project was conducted for the state minister for Rural Environment, Food and Forestry of Baden-Wuerttemberg, Germany) to test remote sensing data with advanced yield formation models for accuracy and timelines of yield estimation of corn. The methodology employed uses field-based plant parameter estimation from atmospherically corrected multitemporal/multispectral LANDSAT-TM data. An agrometeorological plant-production-model is used for yield prediction. Based solely on 4 LANDSAT-derived estimates and daily meteorological data the grain yield of corn stands was determined for 1995. The modeled yield was compared with results independently gathered within the special yield estimation for 23 test fields in the Upper Rhine Valley. The agrement between LANDSAT-based estimates and Special Yield Estimation shows a relative error of 2.3 percent. The comparison of the results for single fields shows, that six weeks before harvest the grain yield of single corn fields was estimated with a mean relative accuracy of 13 percent using satellite information. The presented methodology can be transferred to other crops and geographical regions. For future applications hyperspectral sensors show great potential to further enhance the results or yield prediction with remote sensing.

Expecting excellence is key to receivable success in small and rural hospitals.

PubMed

Boucher, D

1990-06-01

Although small and rural hospitals may have trouble hiring experienced billing and collection personnel, they can succeed in keeping down receivable levels and receivable days by adopting two principles for the business office: expect excellence and inspect for excellence. These principles include setting goals for business office staff as well as listening to and implementing their ideas for more effective operations.

ExCEL in Social Work: Excellence in Cancer Education & Leadership An Oncology Social Work Response to the 2008 Institute of Medicine Report

PubMed Central

Otis-Green, Shirley; Jones, Barbara; Zebrack, Brad; Kilburn, Lisa; Altilio, Terry A.; Ferrell, Betty

2014-01-01

ExCEL in Social Work : Excellence in Cancer Education & Leadership was a multi-year National Cancer Institute (NCI)-funded grant for the development and implementation of an innovative educational program for oncology social workers. The program’s curriculum focused upon six core competencies of psychosocial-spiritual support necessary to meet the standard of care recommended by the 2008 Institute of Medicine (IOM) Report: Cancer Care for the Whole Patient: Meeting Psychosocial Health Needs. The curriculum was delivered through a collaborative partnership between the City of Hope National Medical Center and the two leading professional organizations devoted exclusively to representing oncology social workers - the Association of Oncology Social Work and the Association of Pediatric Oncology Social Workers. Initial findings support the feasibility and acceptability of this tailored leadership skills-building program for participating oncology social workers. PMID:25146345

Profiles of Excellence in Business and Education Leadership.

ERIC Educational Resources Information Center

National Alliance of Business, Inc., Washington, DC.

This document contains two papers on excellence in business and education leadership. "Corporate Leadership in Improving Student Achievement" (Edward B. Rust, Jr.) explains why business must remain involved in education and discusses the following efforts of the State Farm Insurance Company to assume a leadership role in educational…

Dimension scaling effects on the yield sensitivity of HEMT digital circuits

NASA Technical Reports Server (NTRS)

Sarker, Jogendra C.; Purviance, John E.

1992-01-01

In our previous works, using a graphical tool, yield factor histograms, we studied the yield sensitivity of High Electron Mobility Transistors (HEMT) and HEMT circuit performance with the variation of process parameters. This work studies the scaling effects of process parameters on yield sensitivity of HEMT digital circuits. The results from two HEMT circuits are presented.

Creating Realistic 3D Graphics with Excel at High School--Vector Algebra in Practice

ERIC Educational Resources Information Center

Benacka, Jan

2015-01-01

The article presents the results of an experiment in which Excel applications that depict rotatable and sizable orthographic projection of simple 3D figures with face overlapping were developed with thirty gymnasium (high school) students of age 17-19 as an introduction to 3D computer graphics. A questionnaire survey was conducted to find out…

78 FR 44947 - Request for Nominations for 2014 Clean Air Excellence Awards Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-25

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9838-8] Request for Nominations for 2014 Clean Air Excellence... Air Excellence Awards. SUMMARY: This notice announces the competition for the 2014 Clean Air... that the EPA's Office of Air and Radiation (OAR) announces the opening of competition for the 2014...

Using CAD software to simulate PV energy yield - The case of product integrated photovoltaic operated under indoor solar irradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reich, N.H.; van Sark, W.G.J.H.M.; Turkenburg, W.C.

2010-08-15

In this paper, we show that photovoltaic (PV) energy yields can be simulated using standard rendering and ray-tracing features of Computer Aided Design (CAD) software. To this end, three-dimensional (3-D) sceneries are ray-traced in CAD. The PV power output is then modeled by translating irradiance intensity data of rendered images back into numerical data. To ensure accurate results, the solar irradiation data used as input is compared to numerical data obtained from rendered images, showing excellent agreement. As expected, also ray-tracing precision in the CAD software proves to be very high. To demonstrate PV energy yield simulations using this innovativemore » concept, solar radiation time course data of a few days was modeled in 3-D to simulate distributions of irradiance incident on flat, single- and double-bend shapes and a PV powered computer mouse located on a window sill. Comparisons of measured to simulated PV output of the mouse show that also in practice, simulation accuracies can be very high. Theoretically, this concept has great potential, as it can be adapted to suit a wide range of solar energy applications, such as sun-tracking and concentrator systems, Building Integrated PV (BIPV) or Product Integrated PV (PIPV). However, graphical user interfaces of 'CAD-PV' software tools are not yet available. (author)« less

Capturing 'R&D excellence': indicators, international statistics, and innovative universities.

PubMed

Tijssen, Robert J W; Winnink, Jos J

2018-01-01

Excellent research may contribute to successful science-based technological innovation. We define 'R&D excellence' in terms of scientific research that has contributed to the development of influential technologies, where 'excellence' refers to the top segment of a statistical distribution based on internationally comparative performance scores. Our measurements are derived from frequency counts of literature references ('citations') from patents to research publications during the last 15 years. The 'D' part in R&D is represented by the top 10% most highly cited 'excellent' patents worldwide. The 'R' part is captured by research articles in international scholarly journals that are cited by these patented technologies. After analyzing millions of citing patents and cited research publications, we find very large differences between countries worldwide in terms of the volume of domestic science contributing to those patented technologies. Where the USA produces the largest numbers of cited research publications (partly because of database biases), Switzerland and Israel outperform the US after correcting for the size of their national science systems. To tease out possible explanatory factors, which may significantly affect or determine these performance differentials, we first studied high-income nations and advanced economies. Here we find that the size of R&D expenditure correlates with the sheer size of cited publications, as does the degree of university research cooperation with domestic firms. When broadening our comparative framework to 70 countries (including many medium-income nations) while correcting for size of national science systems, the important explanatory factors become the availability of human resources and quality of science systems. Focusing on the latter factor, our in-depth analysis of 716 research-intensive universities worldwide reveals several universities with very high scores on our two R&D excellence indicators. Confirming the above

The results of an experimental indoor hydroponic Cannabis growing study, using the 'Screen of Green' (ScrOG) method-Yield, tetrahydrocannabinol (THC) and DNA analysis.

PubMed

Knight, Glenys; Hansen, Sean; Connor, Mark; Poulsen, Helen; McGovern, Catherine; Stacey, Janet

2010-10-10

The results of an indoor hydroponic Cannabis growth study are presented. It is intended that this work will be of assistance to those with an interest in determining an estimation of yield and value of Cannabis crops. Three cycles of six plants were grown over a period of 1 year in order to ascertain the potential yield of female flowering head material from such an operation. The cultivation methods used were selected to replicate typical indoor hydroponic Cannabis growing operations, such as are commonly encountered by the New Zealand Police. The plants were also tested to ascertain the percentage of the psychoactive chemical Δ-9 tetrahydrocannabinol (THC) present in the flowering head material, and were genetically profiled by STR analysis. Phenotypic observations are related to the data collected. The inexperience of the growers was evidenced by different problems encountered in each of the three cycles, each of which would be expected to negatively impact the yield and THC data obtained. These data are therefore considered to be conservative. The most successful cycle yielded an average of 881g (31.1oz) of dry, groomed female flowering head per plant, and over the whole study the 18 plants yielded a total of 12,360g (436.0oz), or an average of 687g (24.2oz) of dry head per plant. THC data shows significant intra-plant variation and also demonstrates inter-varietal variation. THC values for individual plants ranged from 4.3 to 25.2%. The findings of this study and a separate ESR research project illustrate that the potency of Cannabis grown in New Zealand has dramatically increased in recent years. DNA analysis distinguished distinct groups in general agreement with the phenotypic variation observed. One plant however, exhibiting a unique triallelic pattern at two of the five loci tested, while remaining phenotypically indistinguishable from three other plants within the same grow. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Predicting yields from Appalachian red oak logs and lumber

Treesearch

Daniel E. Dunmire

1971-01-01

One utilization problem is in pinpointing how to efficiently and effectively recover usable parts from logs, bolts, and lumber. Yields, which are output divided by input, provide a key to managers who make processing decisions. Research results are applied to indicate yields of graded lumber and dimension stock from graded Appalachian red oak (group) logs. How to...

Heart centers 2000. Part Three: The challenge of excellence.

PubMed

Ronning, P L; McGinnity, E S

1993-01-01

Healthcare is becoming a mature market from the perspective of "product life cycle" analysis. Mature markets are distinguished by, among other things, expanding competition and increasing emphasis in the market on quality and cost. The cardiac market is the most mature of all aspects of healthcare and, as such, is the most competitive of all healthcare market segments. This is the third in a three-part series on heart centers of the future. The first part dealt with the trends in the cardiac market and the second part focused on the management of change. This article addresses excellence applied to the management of cardiovascular centers over the next decade. Because of the highly evolved nature of the cardiac market, competitive forces will require excellence in terms of service delivery, quality, cost and organization.

The pivotal role of nurse managers, leaders and educators in enabling excellence in nursing care.

PubMed

McSherry, Robert; Pearce, Paddy; Grimwood, Karen; McSherry, Wilfred

2012-01-01

The aims of this paper are to present the findings from a discursive analysis of key issues associated with providing excellence in nursing care; and to provide an exemplar framework to support excellence in nursing care and describe the potential benefits when excellence in nursing care occurs. The challenge facing the nursing profession is in ensuring that the core principles of dignity, respect, compassion and person (people) centered care become central to all aspects of nursing practice. To regain the public and professional confidence in nursing, nurse leaders, managers and educators play a pivotal role in improving the image of nursing. Excellence in nursing care will only happen by ensuring that nurse managers, leaders and educators are able to respond to the complexity of reform and change by leading, managing, enabling, empowering, encouraging and resourcing staff to be innovative and entrepreneurial in practice. Creating healthcare environments that enable excellence in nursing care will not occur without the development of genuine shared working partnerships and collaborations between nurse managers, leaders and educators and their associated organizations. The importance of adopting an authentic sustainable leadership approach to facilitating and supporting frontline staff to innovate and change is imperative in restoring and evidencing that nurses do care and are excellent at what they do. By focusing attention on what resources are required to create a healthcare environment that enables compassion, safety and excellence in nursing care and what this means would be a reasonable start on the journey to excellence in nursing. © 2012 Blackwell Publishing Ltd.

Global Crop Yields, Climatic Trends and Technology Enhancement

NASA Astrophysics Data System (ADS)

Najafi, E.; Devineni, N.; Khanbilvardi, R.; Kogan, F.

2016-12-01

During the last decades the global agricultural production has soared up and technology enhancement is still making positive contribution to yield growth. However, continuing population, water crisis, deforestation and climate change threaten the global food security. Attempts to predict food availability in the future around the world can be partly understood from the impact of changes to date. A new multilevel model for yield prediction at the country scale using climate covariates and technology trend is presented in this paper. The structural relationships between average yield and climate attributes as well as trends are estimated simultaneously. All countries are modeled in a single multilevel model with partial pooling and/or clustering to automatically group and reduce estimation uncertainties. El Niño Southern Oscillation (ENSO), Palmer Drought Severity Index (PDSI), Geopotential height (GPH), historical CO2 level and time-trend as a relatively reliable approximation of technology measurement are used as predictors to estimate annual agricultural crop yields for each country from 1961 to 2007. Results show that these indicators can explain the variability in historical crop yields for most of the countries and the model performs well under out-of-sample verifications.

Real-time yield estimation based on deep learning

NASA Astrophysics Data System (ADS)

Rahnemoonfar, Maryam; Sheppard, Clay

2017-05-01

Crop yield estimation is an important task in product management and marketing. Accurate yield prediction helps farmers to make better decision on cultivation practices, plant disease prevention, and the size of harvest labor force. The current practice of yield estimation based on the manual counting of fruits is very time consuming and expensive process and it is not practical for big fields. Robotic systems including Unmanned Aerial Vehicles (UAV) and Unmanned Ground Vehicles (UGV), provide an efficient, cost-effective, flexible, and scalable solution for product management and yield prediction. Recently huge data has been gathered from agricultural field, however efficient analysis of those data is still a challenging task. Computer vision approaches currently face diffident challenges in automatic counting of fruits or flowers including occlusion caused by leaves, branches or other fruits, variance in natural illumination, and scale. In this paper a novel deep convolutional network algorithm was developed to facilitate the accurate yield prediction and automatic counting of fruits and vegetables on the images. Our method is robust to occlusion, shadow, uneven illumination and scale. Experimental results in comparison to the state-of-the art show the effectiveness of our algorithm.

A Program Aimed toward Inclusive Excellence for Underrepresented Undergraduate Women in the Sciences

ERIC Educational Resources Information Center

Katz, Laura A.; Aloisio, Kathryn M.; Horton, Nicholas J.; Ly, Minh; Pruss, Sara; Queeney, Kate; Rowen, Cate; DiBartolo, Patricia Marten

2017-01-01

Created to foster inclusive excellence, Smith College's Achieving Excellence in Mathematics, Engineering, and Science (AEMES) Scholars program provides early faculty-mentored research opportunities and other programming as a way to foster success in academic outcomes for underrepresented women in science. Using academic record data, we compared…

Excellence in Educating Gifted & Talented Learners, Third Edition.

ERIC Educational Resources Information Center

VanTassel-Baska, Joyce

This text offers a comprehensive introduction to major topics and issues in gifted and talented education. The 28 chapters are grouped into four sections on the general nature of giftedness, program development, organization of curriculum and instruction, and excellence in education of these students. Chapters include the following titles and…

Cultural Leadership: The Culture of Excellence in Education.

ERIC Educational Resources Information Center

Cunningham, William G.; Gresso, Donn W.

Changing the system of rules, roles, and relationships that determine how the components of school redesign are addressed is the challenge that confronts administrators who seek to create a culture of excellence in schools. This book examines the role of effective leadership in achieving significant educational improvement, arguing that culture,…

Excellence in Higher Education Workbook and Scoring Guide

ERIC Educational Resources Information Center

Ruben, Brent D.

2007-01-01

Self-assessment leads to stronger performance in the nation's colleges and universities. That's the premise of "Excellence in Higher Education," a model self-assessment program that has earned accolades from the higher education community. Based on the Malcolm Baldrige National Quality Award framework, the fourth edition of this bestseller is the…

The 2013 Aspen Prize for Community College Excellence

ERIC Educational Resources Information Center

Perlstein, Linda

2013-01-01

For millions of Americans, community colleges provide an essential pathway to well-paying jobs and continuing higher education. The Aspen Prize for Community College Excellence honors those institutions that strive for and achieve exceptional levels of success for all students, while they are in college and after they graduate. Community colleges…

Chemistry. Focus on Excellence, Volume 3, Number 2.

ERIC Educational Resources Information Center

Penick, John E., Ed.; Krajcik, Joseph, Ed.

Eight examples of innovative and outstanding chemistry programs are described. These programs were selected using state criteria and at least four independent reviewers. While Project Synthesis offered a desired state, these examples of excellence provided views of what is already a reality. Included are the goals of an exemplary science program…

77 FR 43819 - Equity and Excellence Commission; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

.... ADDRESSES: The Commission will meet in Washington, DC at the United States Department of Education at 400... Staff, Office for Civil Rights, United States Department of Education. [FR Doc. 2012-18306 Filed 7-25-12... Excellence Commission will hold an open meeting in Washington, DC at the United States Department of...

Hot-boning enhances cook yield of boneless skinless chicken thighs.

PubMed

Zhuang, H; Bowker, B C; Buhr, R J; Brambila, G Sanchez

2014-06-01

Three experiments were conducted to evaluate the effects of postmortem deboning time on cook yield of boneless skinless chicken thighs. In experiment 1, chicken thigh meat was deboned at 0.75 (hot-bone), 2, and 24 h postmortem (PM) and trimmed to obtain mainly iliotibialis muscle. Samples were cooked directly from a frozen state. Cook yield of the muscle was significantly influenced by PM deboning time. Hot-boned thighs exhibited a 7% greater cook yield than the samples deboned at 24 h. In experiment 2, boneless skinless chicken thighs were deboned at 0.3, 2, and 24 h PM and cooked directly from a fresh, never-frozen state at 24 h PM. Cook yield of the hot-boned thighs was significantly higher than those of the 2 and 24 h deboned samples, which did not differ from each other. In experiment 3, whole legs (thigh + drumstick) were cut from the carcass backbone at 0.3 (hot-cut), 2, and 24 h PM. Thighs were separated from the legs (drumsticks) at either the same time the whole legs were removed from the carcasses or at 24 h PM. Intact thighs (bone in) were cooked fresh at 24 h PM. Color of fresh thigh muscles, cook yield, and Warner-Bratzler shear force of cooked samples were measured. Cook yield of the thighs cut from the backbone before chilling was significantly higher than those cut from the carcasses at 2 and 24 h PM, which did not differ from each other. The PM time at which intact thighs were separated from the leg (drumstick) did not influence cook yield. These results demonstrate that postmortem deboning time can significantly affect cook yield of boneless skinless chicken thigh products. Deboning chicken thighs after chilling reduces the cook yield. Differences in the cook yield of thighs may also result from the removal of whole chicken legs from the carcass backbone. Poultry Science Association Inc.

Detection of meteorological extreme effect on historical crop yield anomaly

NASA Astrophysics Data System (ADS)

Kim, W.; Iizumi, T.; Nishimori, M.

2017-12-01

Meteorological extremes of temperature and precipitation are a critical issue in the global climate change, and some studies investigating how the extreme changes in accordance with the climate change are continuously reported. However, it is rarely understandable that the extremes affect crop yield worldwide as heatwave, coolwave, drought, and flood, albeit some local or national reports are available. Therefore, we globally investigated the extremes effects on the variability of historical yield of maize, rice, soy, and wheat with a standardized index and a historical yield anomaly. For the regression analysis, the standardized index is annually aggregated in the consideration of a crop calendar, and the historical yield is detrended with 5-year moving average. Throughout this investigation, we found that the relationship between the aggregated standardized index and the historical yield anomaly shows not merely positive correlation but also negative correlation in all crops in the globe. Namely, the extremes cause decrease of crop yield as a matter of course, but increase in some regions contrastingly. These results help us to quantify the extremes effect on historical crop yield anomaly.

Reed canarygrass yield improvement

USDA-ARS?s Scientific Manuscript database

Reed canarygrass is well adapted to the northern USA. Eight cultivars and 72 accessions collected in rural landscapes from Iowa to New Hampshire were evaluated for yield. Accessions produced on average 7% higher biomass yield compared to existing cultivars. Naturalized populations of reed canarygras...

Linear unmixing of multidate hyperspectral imagery for crop yield estimation

USDA-ARS?s Scientific Manuscript database

In this paper, we have evaluated an unsupervised unmixing approach, vertex component analysis (VCA), for the application of crop yield estimation. The results show that abundance maps of the vegetation extracted by the approach are strongly correlated to the yield data (the correlation coefficients ...

Equality and Excellence in Higher Education--Is It Possible?

ERIC Educational Resources Information Center

Guri, Sarah

1986-01-01

The underlying philosophy of Everyman's University, Israel's open university, is to maintain educational excellence while providing equal educational opportunity to large segments of the population through free access and a flexible program of distance education. (MSE)

WASP (Write a Scientific Paper) using Excel - 7: The t-distribution.

PubMed

Grech, Victor

2018-03-01

The calculation of descriptive statistics after data collection provides researchers with an overview of the shape and nature of their datasets, along with basic descriptors, and may help identify true or incorrect outlier values. This exercise should always precede inferential statistics, when possible. This paper provides some pointers for doing so in Microsoft Excel, both statically and dynamically, with Excel's functions, including the calculation of standard deviation and variance and the relevance of the t-distribution. Copyright © 2018 Elsevier B.V. All rights reserved.

Evaluation of Aimhigher: Excellence Challenge Longitudinal Pupil Analysis Report. Research Report RR814

ERIC Educational Resources Information Center

Morris, Marian; Rutt, Simon

2006-01-01

Aimhigher: Excellence Challenge (initially known as Excellence Challenge) was specifically established by the Department for Education and Skills (DfES) in 2001, with the aim of increasing the number of young people from disadvantaged backgrounds who had the qualifications and aspirations necessary to enter higher education. The analysis conducted…

Soil Texture and Cultivar Effects on Rice (Oryza sativa, L.) Grain Yield, Yield Components and Water Productivity in Three Water Regimes.

PubMed

Dou, Fugen; Soriano, Junel; Tabien, Rodante E; Chen, Kun

2016-01-01

The objective of this study was to determine the effects of water regime/soil condition (continuous flooding, saturated, and aerobic), cultivar ('Cocodrie' and 'Rondo'), and soil texture (clay and sandy loam) on rice grain yield, yield components and water productivity using a greenhouse trial. Rice grain yield was significantly affected by soil texture and the interaction between water regime and cultivar. Significantly higher yield was obtained in continuous flooding than in aerobic and saturated soil conditions but the latter treatments were comparable to each other. For Rondo, its grain yield has decreased with soil water regimes in the order of continuous flooding, saturated and aerobic treatments. The rice grain yield in clay soil was 46% higher than in sandy loam soil averaged across cultivar and water regime. Compared to aerobic condition, saturated and continuous flooding treatments had greater panicle numbers. In addition, panicle number in clay soil was 25% higher than in sandy loam soil. The spikelet number of Cocodrie was 29% greater than that of Rondo, indicating that rice cultivar had greater effect on spikelet number than soil type and water management. Water productivity was significantly affected by the interaction of water regime and cultivar. Compared to sandy loam soil, clay soil was 25% higher in water productivity. Our results indicated that cultivar selection and soil texture are important factors in deciding what water management option to practice.

Biology. Focus on Excellence. Volume 1, Number 3.

ERIC Educational Resources Information Center

Penick, John E., Ed.; Bonnstetter, Ronald J.

The 1982 Search for Excellence in Science Education project has identified 10 exemplary programs in biology. Descriptions of the programs and the criteria used in their selection are presented. Chapter 1 discusses the desired state in biology education, examining the goals of biology education and how these goals relate to biology curriculum and…

Defense.gov - Special Report: Defense Centers of Excellence

Science.gov Websites

Excellence for Psychological Health and Traumatic Brain Injury (DCoE) assesses, validates, oversees and programs for psychological health and traumatic brain injury to ensure the Defense Department meets the audience of more than 1,000 military and other government agency health-care workers and officials gathered

Academic Work and Educational Excellence. Raising Student Productivity.

ERIC Educational Resources Information Center

Tomlinson, Tommy M., Ed.; Walberg, Herbert J., Ed.

The papers presented in this book were selected from some 40 papers commissioned by the National Commission on Excellence in Education. The papers provided the commission with background information for its deliberations prior to the preparation of its report entitled "A Nation at Risk: The Imperative for Educational Reform." The following papers…

Creating Teacher Incentives for School Excellence and Equity

ERIC Educational Resources Information Center

Berry, Barnett; Eckert, Jon

2012-01-01

Ensuring that all students in America's public schools are taught by good teachers is an educational and moral imperative. Teacher incentive proposals are rarely grounded on what high-quality research indicates are the kinds of teacher incentives that lead to school excellence and equity. Few of the current approaches to creating teacher…

Building Higher-Order Markov Chain Models with EXCEL

ERIC Educational Resources Information Center

Ching, Wai-Ki; Fung, Eric S.; Ng, Michael K.

2004-01-01

Categorical data sequences occur in many applications such as forecasting, data mining and bioinformatics. In this note, we present higher-order Markov chain models for modelling categorical data sequences with an efficient algorithm for solving the model parameters. The algorithm can be implemented easily in a Microsoft EXCEL worksheet. We give a…

Postpartum body condition score and results from the first test day milk as predictors of disease, fertility, yield, and culling in commercial dairy herds.

PubMed

Heuer, C; Schukken, Y H; Dobbelaar, P

1999-02-01

The study used field data from a regular herd health service to investigate the relationships between body condition scores or first test day milk data and disease incidence, milk yield, fertility, and culling. Path model analysis with adjustment for time at risk was applied to delineate the time sequence of events. Milk fever occurred more often in fat cows, and endometritis occurred between calving and 20 d of lactation more often in thin cows. Fat cows were less likely to conceive at first service than were cows in normal condition. Fat body condition postpartum, higher first test day milk yield, and a fat to protein ratio of > 1.5 increased body condition loss. Fat or thin condition or condition loss was not related to other lactation diseases, fertility parameters, milk yield, or culling. First test day milk yield was 1.3 kg higher after milk fever and was 7.1 kg lower after displaced abomasum. Higher first test day milk yield directly increased the risk of ovarian cyst and lameness, increased 100-d milk yield, and reduced the risk of culling and indirectly decreased reproductive performance. Cows with a fat to protein ratio of > 1.5 had higher risks for ketosis, displaced abomasum, ovarian cyst, lameness, and mastitis. Those cows produced more milk but showed poor reproductive performance. Given this type of herd health data, we concluded that the first test day milk yield and the fat to protein ratio were more reliable indicators of disease, fertility, and milk yield than was body condition score or loss of body condition score.

Fission yield calculation using toy model based on Monte Carlo simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jubaidah, E-mail: jubaidah@student.itb.ac.id; Physics Department, Faculty of Mathematics and Natural Science – State University of Medan. Jl. Willem Iskandar Pasar V Medan Estate – North Sumatera, Indonesia 20221; Kurniadi, Rizal, E-mail: rijalk@fi.itb.ac.id

2015-09-30

Toy model is a new approximation in predicting fission yield distribution. Toy model assumes nucleus as an elastic toy consist of marbles. The number of marbles represents the number of nucleons, A. This toy nucleus is able to imitate the real nucleus properties. In this research, the toy nucleons are only influenced by central force. A heavy toy nucleus induced by a toy nucleon will be split into two fragments. These two fission fragments are called fission yield. In this research, energy entanglement is neglected. Fission process in toy model is illustrated by two Gaussian curves intersecting each other. Theremore » are five Gaussian parameters used in this research. They are scission point of the two curves (R{sub c}), mean of left curve (μ{sub L}) and mean of right curve (μ{sub R}), deviation of left curve (σ{sub L}) and deviation of right curve (σ{sub R}). The fission yields distribution is analyses based on Monte Carlo simulation. The result shows that variation in σ or µ can significanly move the average frequency of asymmetry fission yields. This also varies the range of fission yields distribution probability. In addition, variation in iteration coefficient only change the frequency of fission yields. Monte Carlo simulation for fission yield calculation using toy model successfully indicates the same tendency with experiment results, where average of light fission yield is in the range of 90« less

Non-heart-beating donors: an excellent choice to increase the donor pool.

PubMed

Nuñez, J R; Del Rio, F; Lopez, E; Moreno, M A; Soria, A; Parra, D

2005-11-01

A specific program was adopted to obtain organs, for transplant purposes from people who die at home or in the street from sudden or unexpected death (type I non-heart-beating donors [NHBD] according to the Maastricht classification). The objective of our program was to increase the donor pool by obtaining organs from well-selected potential donors who die at home, work, or in the street and are maintained on advanced life support (ALS) until hospital arrival. The great number of people who die in a previously healthy situation constitute an excellent source of organs for transplant purposes. Our program includes pre- and in-hospital attendance. Prehospital attendance is based on application of cardiopulmonary resuscitation in situ and ALS until arrival at hospital. In hospital, specific preservation maneuvers must be performed and family assessment and judge permission obtained. In the last 15 years, we developed a kidney transplant program with better results than transplants performed with organs obtained from encephalic death donors (EDD). A specific NHBD subprogram for lung transplant was developed with excellent results as well. We are now improving the liver transplant program. NHBD are an important source of human tissues, including pancreas islets. It is clear that NHBD are a great source of organs and tissues for transplant, and that this kind of program must be established in all countries in which legal regulations allow it.

Comparison of statistical models for analyzing wheat yield time series.

PubMed

Michel, Lucie; Makowski, David

2013-01-01

The world's population is predicted to exceed nine billion by 2050 and there is increasing concern about the capability of agriculture to feed such a large population. Foresight studies on food security are frequently based on crop yield trends estimated from yield time series provided by national and regional statistical agencies. Various types of statistical models have been proposed for the analysis of yield time series, but the predictive performances of these models have not yet been evaluated in detail. In this study, we present eight statistical models for analyzing yield time series and compare their ability to predict wheat yield at the national and regional scales, using data provided by the Food and Agriculture Organization of the United Nations and by the French Ministry of Agriculture. The Holt-Winters and dynamic linear models performed equally well, giving the most accurate predictions of wheat yield. However, dynamic linear models have two advantages over Holt-Winters models: they can be used to reconstruct past yield trends retrospectively and to analyze uncertainty. The results obtained with dynamic linear models indicated a stagnation of wheat yields in many countries, but the estimated rate of increase of wheat yield remained above 0.06 t ha⁻¹ year⁻¹ in several countries in Europe, Asia, Africa and America, and the estimated values were highly uncertain for several major wheat producing countries. The rate of yield increase differed considerably between French regions, suggesting that efforts to identify the main causes of yield stagnation should focus on a subnational scale.

Comparison of Statistical Models for Analyzing Wheat Yield Time Series

PubMed Central

Michel, Lucie; Makowski, David

2013-01-01

The world's population is predicted to exceed nine billion by 2050 and there is increasing concern about the capability of agriculture to feed such a large population. Foresight studies on food security are frequently based on crop yield trends estimated from yield time series provided by national and regional statistical agencies. Various types of statistical models have been proposed for the analysis of yield time series, but the predictive performances of these models have not yet been evaluated in detail. In this study, we present eight statistical models for analyzing yield time series and compare their ability to predict wheat yield at the national and regional scales, using data provided by the Food and Agriculture Organization of the United Nations and by the French Ministry of Agriculture. The Holt-Winters and dynamic linear models performed equally well, giving the most accurate predictions of wheat yield. However, dynamic linear models have two advantages over Holt-Winters models: they can be used to reconstruct past yield trends retrospectively and to analyze uncertainty. The results obtained with dynamic linear models indicated a stagnation of wheat yields in many countries, but the estimated rate of increase of wheat yield remained above 0.06 t ha−1 year−1 in several countries in Europe, Asia, Africa and America, and the estimated values were highly uncertain for several major wheat producing countries. The rate of yield increase differed considerably between French regions, suggesting that efforts to identify the main causes of yield stagnation should focus on a subnational scale. PMID:24205280

A microsoft excel(®) 2010 based tool for calculating interobserver agreement.

PubMed

Reed, Derek D; Azulay, Richard L

2011-01-01

This technical report provides detailed information on the rationale for using a common computer spreadsheet program (Microsoft Excel(®)) to calculate various forms of interobserver agreement for both continuous and discontinuous data sets. In addition, we provide a brief tutorial on how to use an Excel spreadsheet to automatically compute traditional total count, partial agreement-within-intervals, exact agreement, trial-by-trial, interval-by-interval, scored-interval, unscored-interval, total duration, and mean duration-per-interval interobserver agreement algorithms. We conclude with a discussion of how practitioners may integrate this tool into their clinical work.

Striking a Balance: Supporting Teaching Excellence Award Applications

ERIC Educational Resources Information Center

Layton, Catherine; Brown, Christine

2011-01-01

Students and peers who nominate academic staff for teaching excellence awards unwittingly invite them to reflect on their work, and explain their practices to other academics. What is an effective system of academic support for these applicants and should academic developers be doing it at all? Is it possible that academic developers and academic…

Teaching Excellence Awards: An Apple for the Teacher?

ERIC Educational Resources Information Center

Mackenzie, Noella

2007-01-01

In this article the status of teaching as a profession and the morale of teachers in Australian schools in the current era provide a framework for the examination of the intent and outcomes of teaching excellence awards. The research study applied an interpretive research paradigm and used both qualitative and quantitative data collection methods.…

Stopping Distances: An Excellent Example of Empirical Modelling.

ERIC Educational Resources Information Center

Lawson, D. A.; Tabor, J. H.

2001-01-01

Explores the derivation of empirical models for the stopping distance of a car being driven at a range of speeds. Indicates that the calculation of stopping distances makes an excellent example of empirical modeling because it is a situation that is readily understood and particularly relevant to many first-year undergraduates who are learning or…

An Institution in Search of Excellence: Lessons Learnt

ERIC Educational Resources Information Center

Hashim, Fatimah; Awang, Halimah

2005-01-01

This is a report of the strategies adopted by the University of Malaya (UM), Malaysia, to address the issues and complexities involved in its search for excellence in teaching and learning, research and service. The story is told how the university sought accreditation through the International Standards Organisation (ISO) and how by uniting their…

Revision hip arthroplasty with an extensively 
porous-coated stem - excellent long-term 
results also in severe femoral bone stock loss.

PubMed

Thomsen, Per B; Jensen, Niels J F; Kampmann, Jens; Bæk Hansen, Torben

2013-01-01

During the last 25 years uncemented hip stem revision relying on diaphyseal fixation has shown improving clinical results and stem survival. The purpose of this study was to present the long-term results of hip revision with the SOLUTION stem (DePuy, Warsaw Indiana).
Ninety-three consecutive SOLUTION hip stem revisions in 84 patients with a mean age of 69 years (range 33-86 years) were reviewed. Of these, clinical and radiographic follow-up examination by an independent observer was possible in 36 hips/29 patients after mean 14 years (range 10-18 years). Stem re-revision was documented by our own files and by the Danish Hip Arthroplasty Registry. 
Stem re-revision had been performed in two hips for aseptic loosening, one due to deep infection and in one patient due to stem fracture. The 18 years cumulative survival, free of re-revision for any reason was calculated as 94.4% (88.9-99.8)% and for aseptic loosening to 97.6% (94.3-100%). Intraoperative complications were frequent with incidence of shaft fractures (14/93) and perforations (9/93) showing a significant learning curve. Mean Harris Hip Score was 85 (range 53-99). Osseointegration was seen in 34/36 stems with two stems fibrous fixated. Stress shielding was significant associated with stem diameters ≥15 mm. Severe preoperative bone deficiency had no negative bearing on stem survival and no significant influence on osseointegration of the stem or on Harris Hip Score. 
 Femoral stem revision with an extensively porous-coated monoblock chrome-cobalt stem seems to be a reliable and reproducible technique resulting in excellent long-term survivorship and clinical outcome. It can be used in femurs with deficient bone stock.

CDF-XL: computing cumulative distribution functions of reaction time data in Excel.

PubMed

Houghton, George; Grange, James A

2011-12-01

In experimental psychology, central tendencies of reaction time (RT) distributions are used to compare different experimental conditions. This emphasis on the central tendency ignores additional information that may be derived from the RT distribution itself. One method for analysing RT distributions is to construct cumulative distribution frequency plots (CDFs; Ratcliff, Psychological Bulletin 86:446-461, 1979). However, this method is difficult to implement in widely available software, severely restricting its use. In this report, we present an Excel-based program, CDF-XL, for constructing and analysing CDFs, with the aim of making such techniques more readily accessible to researchers, including students (CDF-XL can be downloaded free of charge from the Psychonomic Society's online archive). CDF-XL functions as an Excel workbook and starts from the raw experimental data, organised into three columns (Subject, Condition, and RT) on an Input Data worksheet (a point-and-click utility is provided for achieving this format from a broader data set). No further preprocessing or sorting of the data is required. With one click of a button, CDF-XL will generate two forms of cumulative analysis: (1) "standard" CDFs, based on percentiles of participant RT distributions (by condition), and (2) a related analysis employing the participant means of rank-ordered RT bins. Both analyses involve partitioning the data in similar ways, but the first uses a "median"-type measure at the participant level, while the latter uses the mean. The results are presented in three formats: (i) by participants, suitable for entry into further statistical analysis; (ii) grand means by condition; and (iii) completed CDF plots in Excel charts.

Answering the Global Challenge--Experiences from European Excellence Initiatives. Go8 Backgrounder 24

ERIC Educational Resources Information Center

Grabert, Martin

2011-01-01

There is now a great deal of experience across different countries as they act in their own ways to improve the productivity and excellence of their higher education institutions. Each nation wants to create an international reputation for excellence that will attract students, academic staff and business. This involves change at the national…