Personal exposure to metal fume, NO2, and O3 among production welders and non-welders.

PubMed

Schoonover, Todd; Conroy, Lorraine; Lacey, Steven; Plavka, Julie

2011-01-01

The objective of this study was to characterize personal exposures to welding-related metals and gases for production welders and non-welders in a large manufacturing facility. Welding fume metals and irritant gases nitrogen dioxide (NO(2)) and ozone (O(3)) were sampled for thirty-eight workers. Personal exposure air samples for welding fume metals were collected on 37 mm open face cassettes and nitrogen dioxide and ozone exposure samples were collected with diffusive passive samplers. Samples were analyzed for metals using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and welding fume metal exposure concentrations were defined as the sum of welding-related metals mass per volume of air sampled. Welding fume metal exposures were highly variable among similar types of welding while NO(2) and O(3) exposure were less variable. Welding fume metal exposures were significantly higher 474 μg/m(3) for welders than non-welders 60 μg/m(3) (p=0.001). Welders were exposed to higher concentrations of NO(2) and O(3) than non-welders but the differences were not statistically significant. Welding fume metal exposure concentrations for welders performing gas metal arc welding (GMAW) and shielded metal arc welding (SMAW) were higher than welders performing gas tungsten arc welding (GTAW). Non-welders experienced exposures similar to GTAW welders despite a curtain wall barrier separating welding and non-welding work areas.

Vaccinating welders against pneumonia

PubMed Central

Palmer, Keith T; Cosgrove, Martin P

2013-01-01

Background In 2011 the Department of Health in England recommended that welders should each receive a single dose of the 23-valent pneumococcal vaccine (PPV23). This review assesses the evidence behind the advice and its practical implications. Method The review was informed by a systematic search in Medline, which related pneumonia to welding and/or exposure to metal fume, and was supplemented using the personal libraries of the authors. Findings There is consistent evidence that welders die more often of pneumonia, especially lobar pneumonia, are hospitalised more often with lobar and pneumococcal pneumonia, and more often develop invasive pneumococcal disease (IPD). It is estimated that one case of IPD may be prevented over a 10-year period by vaccinating 588 welders against pneumococcal infection. Conclusions A good case exists that employers should offer PPV23 vaccination to welders and other employees exposed to metal fume. Additionally, reasonable measures must be taken to minimise exposure to welding fume and welders should be encouraged not to smoke. PMID:22764269

A case-control study of leukemia at a naval nuclear shipyard.

PubMed

Stern, F B; Waxweiler, R A; Beaumont, J J; Lee, S T; Rinsky, R A; Zumwalde, R D; Halperin, W E; Bierbaum, P J; Landrigan, P J; Murray, W E

1986-06-01

A matched case-control study was conducted of 53 leukemia deaths and of 212 controls within a previously studied cohort of 24,545 on-shore workers employed between January 1, 1952 and August 15, 1977 at the Portsmouth (New Hampshire) Naval Shipyard. The study sought to ascertain a priori whether there was an association between leukemia deaths and occupational exposure to either ionizing radiation or organic solvents. To obtain information on individual exposures, radiation dose histories and detailed work histories by job and shop were evaluated for each subject. No statistically significant associations were found either between ionizing radiation or presumed solvent exposure and myelogenous or lymphatic leukemia. However, when specific job categories and shops were examined without benefit of a priori hypotheses, two occupations, electrician and welder, were found to be associated with leukemia. For electricians, the Mantel-Haenszel odds ratio (ORMH) was significantly elevated for all leukemias (ORMH = 3.00, 95% confidence interval (CI) = 1.29-6.98), particularly for lymphatic leukemia (ORMH = 6.00, 95% CI = 1.47-24.45). For welders, the odds ratio was not significantly elevated for all leukemias (ORMH = 2.25, 95% CI = 0.92-5.53), but was significantly elevated for myeloid leukemia (ORMH = 3.83, 95% CI = 1.28-11.46). These findings persisted when potential confounders were adjusted by means of a conditional logistic regression model.

Portable Welder

NASA Technical Reports Server (NTRS)

1984-01-01

A low cost, low power, self-contained portable welding gun designed for joining thermoplastics which become soft when heated and harden when cooled was developed originally by NASA's Langley Research Center for repairing helicopter windshields. Welder has a broad range of applications for joining both thermoplastic materials in the aerospace, automotive, appliance, and construction industries. Welders portability and low power requirement allow its use on-site in any type of climate, with power supplied by a variety of portable sources.

Pulse magnetic welder

DOEpatents

Christiansen, D.W.; Brown, W.F.

1984-01-01

A welder is described for automated closure of fuel pins by a pulsed magnetic process in which the open end of a length of cladding is positioned within a complementary tube surrounded by a pulsed magnetic welder. Seals are provided at each end of the tube, which can be evacuated or can receive tag gas for direct introduction to the cladding interior. Loading of magnetic rings and end caps is accomplished automatically in conjunction with the welding steps carried out within the tube.

Effect of occupational manganese exposure on the central nervous system of welders: 1H magnetic resonance spectroscopy and MRI findings.

PubMed

Kim, Eun A; Cheong, Hae-Kwan; Choi, Dae Seob; Sakong, Joon; Ryoo, Jae Wook; Park, Injeong; Kang, Dong Mug

2007-03-01

This study investigated the relationship between long-term occupational manganese (Mn) exposure on the regional Mn concentration in the brain, neuronal loss, and neurobehavioral effects on welders. 1H MRS of the basal ganglia (BG) was performed on 20 male welders and 10 age- and gender-matched, non-office, control workers in a shipyard to assess the metabolic change, and the N-acetylaspartate (NAA)/creatine (Cr), choline (Cho)/Cr and NAA/Cho ratios, by the level of Mn exposure. We also assessed the signal intensity of T1-weighted image of magnetic resonance imaging (MRI) on globus pallidus (GP) compared to that of the frontal white matter (pallidal index, PI). The welders had significantly higher signal intensity than the controls. PI showed a significant dose-response relationship with cumulative exposure index (CEI) (r=0.54, p=0.002). CEI and PI showed different relationships with NAA/Cr according to smoking status, and the correlation was evident only in non-smokers (r=-0.73 and -0.57, respectively). There were no significant differences between the welders and the controls in NAA/Cr, Cho/Cr, and NAA/Cho ratios obtained from BG. CEI was positively correlated with simple reaction time. PI was positively correlated with mean sway (MSWAY), sway area (SWAYA), and sway intensity (SWAYI), and negatively correlated with maximum frequency (MAXF). After categorizing the subjects into two groups according to NAA/Cr ratio level, the low NAA/Cr ratio group showed significantly lower score on digit span backward and significantly higher score on MSWAY, SWAYA and SWAYI in regression analysis than the high NAA/Cr ratio group. We speculated that the NAA/Cr ratio of MRS in BG seems to reflect the cumulative effect of Mn exposure on the human brain. Due to uneven distribution of smoking among the welders and the controls, in addition to the small number of subjects in our study, our findings are needed further studies with a larger number of subjects.

Incidence of cancer among Norwegian boiler welders.

PubMed Central

Danielsen, T E; Langård, S; Andersen, A

1996-01-01

OBJECTIVES: The cancer incidence among 2957 boiler welders was investigated. The subjects were registered electrical welders from 1942 to 1981. A subcohort of 606 stainless steel welders was studied separately. METHODS: The investigation was a historical prospective cohort study based on a national registry. The loss of follow up was 4.9%. RESULTS: There were 625 deaths (659 expected). There were 269 cancer cases (264 expected). An excess of lung cancer was found; 50 cases v 37.5 expected. There were three cases of pleural mesotheliomas v 1.1 expected. The subcohort of stainless steel welders had six cases of lung cancer v 5.8 expected, and one case of pleural mesothelioma v 0.2 expected. CONCLUSIONS: The welders in the study were assumed to represent a qualified work force. These welders had a small excess risk of lung cancer. The excess risk did not seem to be associated with stainless steel welding. Smoking and asbestos exposure were potential confounders. PMID:8664959

Cancer Risk Assessment in Welder's Under Different Exposure Scenarios.

PubMed

Barkhordari, Abolfazl; Zare Sakhvidi, Mohammad Javad; Zare Sakhvidi, Fariba; Halvani, Gholamhossein; Firoozichahak, Ali; Shirali, GholamAbbas

2014-05-01

Welders exposure to nickel and hexavalent chromium in welding fumes is associated with increase of cancer risk in welders. In this study we calculated cancer risk due to exposure to these compounds in welders. The role of exposure parameters in welders on derived incremental lifetime cancer risk were determined by stochastic modeling of cancer risk. Input parameters were determined by field investigation in Iranian welders in 2013 and literature review. The 90% upper band cancer risk due to hexavalent chromium and nickel exposure was in the range of 6.03E-03 to 2.12E-02 and 7.18E-03 to 2.61E-02 respectively. Scenario analysis showed that asthmatic and project welders are significantly at higher cancer risk in comparison with other welders (P<0.05). Shift duration was responsible for 37% and 33% of variances for hexavalent chromium and nickel respectively. Welders are at high and unacceptable risk of cancer. Control measures according to scenario analysis findings are advisable.

Validity and reliability of an occupational exposure questionnaire for parkinsonism in welders.

PubMed

Hobson, Angela J; Sterling, David A; Emo, Brett; Evanoff, Bradley A; Sterling, Callen S; Good, Laura; Seixas, Noah; Checkoway, Harvey; Racette, Brad A

2009-06-01

This study assessed the validity and test-retest reliability of a medical and occupational history questionnaire for workers performing welding in the shipyard industry. This self-report questionnaire was developed for an epidemiologic study of the risk of parkinsonism in welders. Validity participants recruited from three similar shipyards were asked to give consent for access to personnel files and complete the questionnaire. Responses on the questionnaire were compared with information extracted from personnel records. Reliability participants were recruited from the same shipyards and were asked to complete the questionnaire at two different times approximately 4 weeks apart. Percent agreement, kappa, intraclass correlation coefficient (ICC), and sensitivity and specificity were used as measures of validity and/or reliability. Personnel files were obtained for 101 of 143 participants (70%) in the validity study, and 56 of the 95 (58.9%) participants in the reliability study completed the retest of the questionnaire. Validity scores for items extracted from personnel files were high. Percent agreement for employment dates and job titles ranged from 83-100%, while ICC for start and stop dates ranged from 0.93-0.99. Sensitivity and specificity for current job title ranged from 0.5-1.0. Reliability scores for demographic, medical and health behavior items were mainly moderate or high, but ranged from 0.19 to 1.0. Most recent job/title items such as title, types of welding performed, and material used showed substantial to perfect agreement. Certain determinants of exposure such as days and hours per week exposed to welding fumes demonstrated mainly moderate agreement (kappa= 0.42-0.47, percent agreement 63-77%); however, mean days and hours reported did not differ between test and retest. The results of this study suggest that participants' self-report for job title and dates employed are valid compared with employer records. While kappa scores were low for some

Pattern of eye diseases among welders in a Nigeria community.

PubMed

Ajayi Iyiade, A; Omotoye Olusola, J

2012-06-01

Welders have been identified as a high risk group for eye disorders due to their exposure to ultraviolet radiation. To determine the prevalence and types of eye diseases amongst welders in Ile-Ife, Osun state. This is a cross sectional descriptive study of 405 consenting welders. Information on socio-demographic characteristics was obtained using a pre-tested proforma and all subjects had visual actuity test, anterior and posterior segments examination, test of stereopsis and macular function. Two hundred and seventy five (67.9%) of the respondents were arc welders, 99(22.5%) were gas welders while 39(9.6%) utilized both welding techniques. The age of the respondents ranged from 16 years to 80 years with a mean of 38 ± 13 years. Conjunctival degenerative disorders like pingueculum (50.1%) and pterygium(17.5%) constituted the commonest eye disorders among the welders. There were 6 blind eyes of 5 welders with pigmentary maculopathy accounting for the single case of bilateral blindness. There is a greater odd in developing pingueculum and Pterygium (OR=1.015, 1.039 respectively) in arc welders than in gas welders. Pingueculum, Pterygium, corneal opacity, and pigmentary macular deposits were the common eye disorders among welders.

Occupational safety measures and morbidity among welders in Vellore, Southern India

PubMed Central

Alexander, Vijay; Zechariah, Pradeep; Nair, Suryanarayan Rajendran; Kattula, Deepthi

2016-01-01

Background Welders in the unorganized occupational sector in the economically developing world are exposed to respiratory, skin, eye, ear, and neurological problems exacerbated by non-usage of personal protective equipment (PPE). Objective To study the frequency of health problems and the usage of PPE among welders in unorganized welding units in Vellore, India. Methods A cross-sectional survey was conducted among 150 welders to determine the frequency of skin, ear, eye, and respiratory morbidity and the usage of PPE. A group of 150 non-welders were chosen for comparison. Results Significant differences in the frequency of skin burns, redness, hyper pigmentation, itching, eye injuries, and sensorineural deafness were observed among the welders and non-welders (P < 0.001). Hypertension was noted in 12.6% of the welders as compared to 0.7% among the non-welders. None of the welders used appropriate PPE. For welders, low educational attainment was associated with an increased risk of eye injury (P < 0.05, OR = 0.29). There was also a significant difference between sensorineural deafness and a welder having less than 10 years of welding work experience (P < 0.001, OR = 18.18) which could probably be accounted for by the healthy worker effect. Conclusion Welders in this sample experienced a significant skin, eye, and ear morbidity accentuated by the non-usage of PPE. All worked without formal training and were unaware of the safe working guidelines that exist, but are not implemented for the welders in India. PMID:27682579

Effect of chronic exposure to welding light on Calabar welders.

PubMed

Davies, K G; Asanga, U; Nku, C O; Osim, E E

2007-01-01

It was generally observed that welders in Calabar, Nigeria did not always wear their protective goggles during welding. Since chronic exposure to welding light can impair vision this study was done to assess the effect of exposure to welding light on ocular function of welders in Calabar, Nigeria. There were 195 subjects comprising 110 welders (test) and 85 control subjects. Both groups were all male and had similar age range. The tests employed were clinical examination for ocular disorders, assessment of visual acuity, and opthalmoscopy. Test questionnaire was also used to record information on length of service, precautionary measures at work place, age and past ocular illnesses. The study also compared incidence of ocular disorders between the two groups of welders (arc and carbide welders). The mean ages of the welders and their control were not significantly different (27.53 +/- 10.0 vs 27.78 +/- 8.5 yrs respectively). There was a significantly [P < 0.01] higher incidence of pingueculum, cataract, allergic conjunctivitis, corneal opacity, and keratoconjunctivitis (arc eye) in welders than in their control subjects. However, visual acuity, incidence of pterygium and glaucoma were similar. Between the two groups of welders, the incidence of pterygium, corneal opacity and keratoconjunctivitis was significantly [P < 0.01] higher in arc welders than carbide welders. The incidence of pingueculum and glaucoma were however, similar. In conclusion, chronic exposure to welding light without adequate precaution may cause ocular disorders. Arc welding is more dangerous to ocular function than carbide welding. Length of service and age are predisposing factors to ocular disorders in the welding business.

Respiratory morbidity among welders in the shipbuilding industry, Goa

PubMed Central

Bhumika, Nateshan; Prabhu, Ganapati Vasant; Ferreira, Agnelo Menino; Kulkarni, Manoj Kumar; Vaz, Frederick Satiro; Singh, Zile

2012-01-01

Context: Welding is pivotal in shipbuilding. The fumes and gases involved in welding may cause respiratory morbidity. Aim: To study the prevalence of respiratory morbidity (RM) among welders vis à vis among nonwelders and its association with certain relevant factors. Settings and Design: A cross-sectional study of 276 welders and 276 nonwelders was conducted in the shipbuilding industry. Materials and Methods: An interviewer-administered questionnaire was followed by spirometric examination. Statistical Analysis: Odds ratio and its 95% CI and two-way ANOVA. Results: Prevalence of RM was found to be significantly higher among welders compared to nonwelders (who were comparable in age, duration of employment (DOE) and smoking habits,) with odds ratio (OR) of 1.78 (95% confidence interval (CI):1.20-2.63). Obstructive type of RM was predominant in both welders (26% (n = 73)) and nonwelders (17% (n = 49)) with welders being at a significantly higher risk (OR = 1.66 (95%: 1.10-2.49)). RM was commoner after the 40 years of age or after 20 years of employment in both groups. Smoking was associated with RM among welders (OR = 1.48, 95% CI: 1.24-1.75) as well as nonwelders (OR = 2.83, 95% CI: 2.26-3.54). Work-related respiratory symptoms (WRRS) was not found to be related to RM (OR = 1.69, 95% CI: 1.00-2.84). Consistent use of personal protective equipment (PPE) was protective against RM in welders (OR = 0.33, 95% CI: 0.28-0.37). Conclusion: Welders had a greater burden of RM and this was related to increasing age, DOE, smoking and inconsistent use of PPE. WRRS were not indicative of RM. PMID:23580835

Respiratory morbidity among welders in the shipbuilding industry, Goa.

PubMed

Bhumika, Nateshan; Prabhu, Ganapati Vasant; Ferreira, Agnelo Menino; Kulkarni, Manoj Kumar; Vaz, Frederick Satiro; Singh, Zile

2012-05-01

Welding is pivotal in shipbuilding. The fumes and gases involved in welding may cause respiratory morbidity. To study the prevalence of respiratory morbidity (RM) among welders vis à vis among nonwelders and its association with certain relevant factors. A cross-sectional study of 276 welders and 276 nonwelders was conducted in the shipbuilding industry. An interviewer-administered questionnaire was followed by spirometric examination. Odds ratio and its 95% CI and two-way ANOVA. Prevalence of RM was found to be significantly higher among welders compared to nonwelders (who were comparable in age, duration of employment (DOE) and smoking habits,) with odds ratio (OR) of 1.78 (95% confidence interval (CI):1.20-2.63). Obstructive type of RM was predominant in both welders (26% (n = 73)) and nonwelders (17% (n = 49)) with welders being at a significantly higher risk (OR = 1.66 (95%: 1.10-2.49)). RM was commoner after the 40 years of age or after 20 years of employment in both groups. Smoking was associated with RM among welders (OR = 1.48, 95% CI: 1.24-1.75) as well as nonwelders (OR = 2.83, 95% CI: 2.26-3.54). Work-related respiratory symptoms (WRRS) was not found to be related to RM (OR = 1.69, 95% CI: 1.00-2.84). Consistent use of personal protective equipment (PPE) was protective against RM in welders (OR = 0.33, 95% CI: 0.28-0.37). Welders had a greater burden of RM and this was related to increasing age, DOE, smoking and inconsistent use of PPE. WRRS were not indicative of RM.

Airborne metal concentrations in shipyard environment.

PubMed

Alebić-Juretić, A; Matković, N

2000-06-01

Protection against corrosion in the shipyard is a source of airborne particles. From October 1996 to September 1997 samples of suspended particles (1 site) and dustfall (6 sites) were collected in the vicinity of a repairs shipyard situated in the martinsćica Cove, east of the city of Rijeka, Croatia. Collected samples were analysed for lead, cadmium, iron, copper, and zinc content. Though annual mean concentrations of suspended particles, lead, and cadmium kept below the guideline values, the metal contents were generally higher than values measured in the city centre. The correlation between the quantity of abrasives used at the shipyard and monthly mean concentrations of all parameters except cadmium suggests that the shipyard was the main source of those pollutants. The annual mean, as well as maximum monthly amount of dustfall at the site next to the shipyard zone exceeded the national limit values, indicating considerable pollution of this area with coarse particles. The annual mean quantity of lead in dustfall exceeded the guideline values at the same site. The content of metals occasionally observed in dustfall at particular sites surrounding the shipyard depended on the location of corrosion protection activities and meterological conditions within the Martinsćica Cove.

Ocular injuries among industrial welders in Port Harcourt, Nigeria.

PubMed

Fiebai, B; Awoyesuku, Ea

2011-01-01

The purpose of this study was to determine the prevalence and pattern of ocular injuries among industrial welders and rate the use of protective eyewear at work among industrial welders in Port Harcourt. Information from this study will provide a database for effective policy formation on prevention of occupational eye injuries in Port Harcourt Rivers State. A cross-sectional survey of ocular injuries and use of protective eyewear among industrial welders in the Port Harcourt local government area of Rivers State, Nigeria, was carried out over a three-month period. Five hundred welders were selected by simple random sampling. Information was obtained using an interviewer-administered questionnaire. All welders were examined in their workshops. Flying metal chips were the chief source of ocular injury, as reported by 199 (68.15%) of those who gave a history of work-related eye injury, while arc rays accounted for the remaining 93 (31.85%). There was a high level of awareness of the risk of sustaining an eye injury from welding (n = 490, 98%), but only 46 (15.3%) of the welders were using protective eyewear at the time of injury. To minimize ocular injury and promote eye health amongst industrial welders, safety intervention programs, such as awareness campaigns, setting up of targeted programs by the relevant government agencies, and encouragement of locally produced eye protectors is recommended. The involvement of occupational medical practitioners is also strongly recommended.

Ocular injuries among industrial welders in Port Harcourt, Nigeria

PubMed Central

Fiebai, B; Awoyesuku, EA

2011-01-01

Background The purpose of this study was to determine the prevalence and pattern of ocular injuries among industrial welders and rate the use of protective eyewear at work among industrial welders in Port Harcourt. Information from this study will provide a database for effective policy formation on prevention of occupational eye injuries in Port Harcourt Rivers State. Methods A cross-sectional survey of ocular injuries and use of protective eyewear among industrial welders in the Port Harcourt local government area of Rivers State, Nigeria, was carried out over a three-month period. Five hundred welders were selected by simple random sampling. Information was obtained using an interviewer-administered questionnaire. All welders were examined in their workshops. Results Flying metal chips were the chief source of ocular injury, as reported by 199 (68.15%) of those who gave a history of work-related eye injury, while arc rays accounted for the remaining 93 (31.85%). There was a high level of awareness of the risk of sustaining an eye injury from welding (n = 490, 98%), but only 46 (15.3%) of the welders were using protective eyewear at the time of injury. Conclusion To minimize ocular injury and promote eye health amongst industrial welders, safety intervention programs, such as awareness campaigns, setting up of targeted programs by the relevant government agencies, and encouragement of locally produced eye protectors is recommended. The involvement of occupational medical practitioners is also strongly recommended. PMID:21966197

Health related quality of life and influencing factors among welders.

PubMed

Qin, Jingxiang; Liu, Wuzhong; Zhu, Jun; Weng, Wei; Xu, Jiaming; Ai, Zisheng

2014-01-01

Occupational exposure to welding fumes is a serious occupational health problem all over the world. Welders are exposed to many occupational hazards; these hazards might cause some occupational diseases. The aim of the study was to assess the health related quality of life (HRQL) of electric welders in Shanghai China and explore influencing factors to HRQL of welders. 301 male welders (without pneumoconiosis) and 305 non-dust male workers in Shanghai were enrolled in this study. Short Form-36 (SF-36) health survey questionnaires were applied in this cross-sectional study. Socio-demographic, working and health factors were also collected. Multiple stepwise regress analysis was used to identify significant factors related to the eight dimension scores. Six dimensions including role-physical (RP), bodily pain (BP), general health (GH), validity (VT), social function (SF), and mental health (MH) were significantly worse in welders compared to non-dust workers. Multiple stepwise regress analysis results show that native place, monthly income, quantity of children, drinking, sleep time, welding type, use of personal protective equipment (PPE), great events in life, and some symptoms including dizziness, discomfort of cervical vertebra, low back pain, cough and insomnia may be influencing factors for HRQL of welders. Among these factors, only sleep time and the use of PPE were salutary. Some dimensions of HRQL of these welders have been affected. Enterprises which employ welders should take measures to protect the health of these people and improve their HRQL.

Prevalence of color vision deficiency among arc welders.

PubMed

Heydarian, Samira; Mahjoob, Monireh; Gholami, Ahmad; Veysi, Sajjad; Mohammadi, Morteza

This study was performed to investigate whether occupationally related color vision deficiency can occur from welding. A total of 50 male welders, who had been working as welders for at least 4 years, were randomly selected as case group, and 50 age matched non-welder men, who lived in the same area, were regarded as control group. Color vision was assessed using the Lanthony desatured panel D-15 test. The test was performed under the daylight fluorescent lamp with a spectral distribution of energy with a color temperature of 6500K and a color rendering index of 94 that provided 1000lx on the work plane. The test was carried out monocularly and no time limit was imposed. All data analysis were performed using SPSS, version 22. The prevalence of dyschromatopsia among welders was 15% which was statistically higher than that of nonwelder group (2%) (p=0.001). Among welders with dyschromatopsia, color vision deficiency in 72.7% of cases was monocular. There was positive relationship between the employment length and color vision loss (p=0.04). Similarly, a significant correlation was found between the prevalence of color vision deficiency and average working hours of welding a day (p=0.025). Chronic exposure to welding light may cause color vision deficiency. The damage depends on the exposure duration and the length of their employment as welders. Copyright © 2016 Spanish General Council of Optometry. Published by Elsevier España, S.L.U. All rights reserved.

Pulmonary adverse effects of welding fume in automobile assembly welders.

PubMed

Sharifian, Seyed Akbar; Loukzadeh, Ziba; Shojaoddiny-Ardekani, Ahmad; Aminian, Omid

2011-01-01

Welding is one of the key components of numerous manufacturing industries, which has potential physical and chemical health hazards. Many components of welding fumes can potentially affect the lung function. This study investigates the effects of welding fumes on lung function and respiratory symptoms among welders of an automobile manufacturing plant in Iran. This historical cohort study assesses 43 male welders and 129 office workers by a questionnaire to record demographic data, smoking habits, work history and respiratory symptoms as well as lung function status by spirometry. The average pulmonary function values of welders were lower relative to controls with dose-effect relationship between work duration and pulmonary function impairment. The prevalence of chronic bronchitis was higher in welders than controls. Our findings suggest that welders are at risk for pulmonary disease.

49 CFR 192.227 - Qualification of welders.

Code of Federal Regulations, 2010 CFR

2010-10-01

... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192.227 Qualification... earlier edition. (b) A welder may qualify to perform welding on pipe to be operated at a pressure that... process to be used, under the test set forth in section I of Appendix C of this part. Each welder who is...

Ocular ultraviolet radiation exposure of welders.

PubMed

Tenkate, Thomas D

2017-05-01

I read with interest a recent paper in your journal by Slagor et al on the risk of cataract in relation to metal arc welding (1). The authors highlight that even though welders are exposed to substantial levels of ultraviolet radiation (UVR), "no studies have reported data on how much UVR welders' eyes are exposed to during a working day. Thus, we do not know whether welders are more or less exposed to UVR than outdoor workers" (1, p451). Undertaking accurate exposure assessment of UVR from welding arcs is difficult, however, two studies have reported ocular/facial UVR levels underneath welding helmets (2, 3). In the first paper, UVR levels were measured using polysulphone film dosimeters applied to the cheeks of a patient who suffered from severe facial dermatitis (2). UVR levels of four times the American Conference of Governmental Industrial Hygienists (ACGIH) maximum permissible exposure (MPE) (4) were measured on the workers left cheek and nine times the MPE on the right cheek. The authors concluded that the workers dermatitis was likely to have been due to the UVR exposure received during welding. In the other paper, a comprehensive exposure assessment of personal UVR exposure of workers in a welding environment was reported (3). The study was conducted at a metal fabrication workshop with participants being welders, boilermakers and non-welders (eg, supervisors, fitters, machinists). Polysulphone film dosimeters were again used to measure UVR exposure of the workers, with badges worn on the clothing of workers (in the chest area), on the exterior of welding helmets, attached to 11 locations on the inside of welding helmets, and on the bridge and side-shields of safety spectacles. Dosimeters were also attached to surfaces throughout the workshop to measure ambient UVR levels. For welding subjects, mean 8-hour UVR doses within the welding helmets ranged from around 9 mJ/cm 2 (3×MPE) on the inside of the helmets to around 15 mJ/cm 2 (5×MPE) on the headband (a

46 CFR 298.18 - Financing Shipyard Projects.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Guarantees will not exceed the reasonable economic useful life of the collective assets which comprise this... achieved, (iii) The geographic location of the shipyard, (iv) The long-term viability of the shipyard, (v...

46 CFR 298.18 - Financing Shipyard Projects.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Guarantees will not exceed the reasonable economic useful life of the collective assets which comprise this... achieved, (iii) The geographic location of the shipyard, (iv) The long-term viability of the shipyard, (v...

46 CFR 298.18 - Financing Shipyard Projects.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Guarantees will not exceed the reasonable economic useful life of the collective assets which comprise this... achieved, (iii) The geographic location of the shipyard, (iv) The long-term viability of the shipyard, (v...

46 CFR 298.18 - Financing Shipyard Projects.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Guarantees will not exceed the reasonable economic useful life of the collective assets which comprise this... achieved, (iii) The geographic location of the shipyard, (iv) The long-term viability of the shipyard, (v...

46 CFR 298.18 - Financing Shipyard Projects.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Guarantees will not exceed the reasonable economic useful life of the collective assets which comprise this... achieved, (iii) The geographic location of the shipyard, (iv) The long-term viability of the shipyard, (v...

Small airways function in aluminium and stainless steel welders.

PubMed

Nielsen, J; Dahlqvist, M; Welinder, H; Thomassen, Y; Alexandersson, R; Skerfving, S

1993-01-01

The effect of welding fumes on small airways was studied in 25 male subjects who welded in aluminium (Al) and to some extent also in stainless steel (SS). Despite a low exposure to welding fumes as compared to the permissible exposure limits, excretion of Al in urine was found to be increased in all subjects (median value: 0.29 mmol/mol creatinine on Friday afternoon, as compared to an upper reference level of 0.10 mmol/mol creatinine). In addition, the welders displayed increased prevalences of work-related eye and airways (pharyngitis and non-specific bronchial hyperreactivity) symptoms, as compared to 25 matched controls. Short-term welders (< or = 2.5 years) had more symptoms related to the upper airways than did long-term welders, which may indicate a selection. Spirometry, closing volume and volume of trapped gas (VTG) did not deviate. However, after methacholine inhalation, the long-term welders had a significantly steeper slope of the alveolar plateau on the single-breath nitrogen wash-out test, and a slight increase in VTG, as compared to the short-term welders and the controls. These findings may indicate a welding fume-induced increase in the reactivity of the small airways. Because Al welding was far more frequent than SS welding, an association with the former seems likely.

Characterisation of exposure to total and hexavalent chromium of welders using biological monitoring.

PubMed

Scheepers, P T J; Heussen, G A H; Peer, P G M; Verbist, K; Anzion, R; Willems, J

2008-05-30

Inhalation exposure to total and hexavalent chromium (TCr and HCr) was assessed by personal air sampling and biological monitoring in 53 welders and 20 references. Median inhalation exposure levels of TCr were 1.3, 6.0, and 5.4 microg/m(3) for welders of mild steel (MS, <5% alloys), high alloy steel (HAS, >5% alloys), and stainless steel (SS, >26% alloys), respectively. The median exposures to HCr compounds were 0.23, 0.20, and 0.08 microg/m(3), respectively. Median concentrations of TCr in urine, blood plasma and erythrocytes were elevated in all welders, compared with the corresponding median concentrations in the reference group (p<0.005). The TCr levels observed in plasma were two-fold higher in welders of SS and HAS than in welders of MS (p<0.01). Exposure to HCr as indicated by median total content of Cr in erythrocytes was 10 microg/L in welders of SS, MS and HAS. Uptake of TCr during the shift was confirmed for welders of SS by a median increase of urinary TCr from pre- to post-shift of 0.30 microg/g creatinine. For welders of MS and HAS as a group TCr was not increased.

Specification for Qualification and Certification for Entry Level Welders.

ERIC Educational Resources Information Center

American Welding Society, Miami, FL.

This document provides a standard that defines the requirements and program for the American Welding Society to certify entry-level welders. The certification of entry-level welders requires performance qualification and practical knowledge tests that require a minimum of reading, computation, and manual skills to complete. The Entry-Level Welder…

Electroacoustics modeling of piezoelectric welders for ultrasonic additive manufacturing processes

NASA Astrophysics Data System (ADS)

Hehr, Adam; Dapino, Marcelo J.

2016-04-01

Ultrasonic additive manufacturing (UAM) is a recent 3D metal printing technology which utilizes ultrasonic vibrations from high power piezoelectric transducers to additively weld similar and dissimilar metal foils. CNC machining is used intermittent of welding to create internal channels, embed temperature sensitive components, sensors, and materials, and for net shaping parts. Structural dynamics of the welder and work piece influence the performance of the welder and part quality. To understand the impact of structural dynamics on UAM, a linear time-invariant model is used to relate system shear force and electric current inputs to the system outputs of welder velocity and voltage. Frequency response measurements are combined with in-situ operating measurements of the welder to identify model parameters and to verify model assumptions. The proposed LTI model can enhance process consistency, performance, and guide the development of improved quality monitoring and control strategies.

Pulmonary exposure to metal fume particulate matter cause sleep disturbances in shipyard welders.

PubMed

Chuang, Hsiao-Chi; Su, Ting-Yao; Chuang, Kai-Jen; Hsiao, Ta-Chih; Lin, Hong-Ling; Hsu, Yuan-Ting; Pan, Chih-Hong; Lee, Kang-Yun; Ho, Shu-Chuan; Lai, Ching-Huang

2018-01-01

Sleep disorders may pose a risk to workers in the workplace. We aimed to investigate the associations between metal fume fine particulate matter (PM 2.5 ) and sleep quality in workers. We assessed the effects of personal exposure to metal fume PM 2.5 on lung functions, urinary biomarkers, and sleep quality in shipyard welding workers. In total, 96 welding workers and 54 office workers were recruited in the present study; office workers were exposed to 82.1 ± 94.1 μg/m 3 PM 2.5 and welding workers were exposed to 2166.5 ± 3149.1 μg/m 3 . Welding workers had significantly lower levels of FEV25-75 than office workers (p < 0.05). An increase in 1 μg/m 3 PM 2.5 was associated with a decrease of 0.003 ng/mL in urinary serotonin (95% CI = -0.007-0.000, p < 0.05) in all workers and with a decrease of 0.001 ng/mL in serotonin (95% CI = -0.004-0.002, p < 0.05) in welding workers, but these were not observed in office workers. There was no significant association of PM 2.5 with urinary cortisol observed in any workers. Urinary serotonin was associated with urinary Cu, Mn, Co, Ni, Cd, and Pb. Urinary cortisol was associated with Cu, Mn, Co, Ni, Cd, and Pb. Sixteen subjects were randomly selected from each of the office and welding workers for personal monitoring of sleep quality using a wearable device. We observed that welding workers had greater awake times than did office workers (p < 0.05). Our study observed that exposure to heavy metals in metal fume PM 2.5 may disrupt sleep quality in welding workers. Copyright © 2017 Elsevier Ltd. All rights reserved.

Gas tungsten arc welder

DOEpatents

Christiansen, D.W.; Brown, W.F.

A welder for automated closure of fuel pins by a gas tungsten arc process in which a rotating length of cladding is positioned adjacent a welding electrode in a sealed enclosure. An independently movable axial grinder is provided in the enclosure for refurbishing the used electrode between welds.

46 CFR 57.05-4 - Welder qualification by procedure tests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Welder qualification by procedure tests. 57.05-4 Section 57.05-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Performance Qualifications § 57.05-4 Welder qualification by procedure tests...

46 CFR 57.05-4 - Welder qualification by procedure tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Welder qualification by procedure tests. 57.05-4 Section 57.05-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Performance Qualifications § 57.05-4 Welder qualification by procedure tests...

46 CFR 57.05-4 - Welder qualification by procedure tests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Welder qualification by procedure tests. 57.05-4 Section 57.05-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Performance Qualifications § 57.05-4 Welder qualification by procedure tests...

46 CFR 57.05-4 - Welder qualification by procedure tests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Welder qualification by procedure tests. 57.05-4 Section 57.05-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Performance Qualifications § 57.05-4 Welder qualification by procedure tests...

46 CFR 57.05-4 - Welder qualification by procedure tests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false Welder qualification by procedure tests. 57.05-4 Section 57.05-4 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING WELDING AND BRAZING Performance Qualifications § 57.05-4 Welder qualification by procedure tests...

South Carolina Shipyards: Labour, Logistics, Lumber and Ladies

NASA Astrophysics Data System (ADS)

Harris, Lynn

2010-10-01

Southern shipyards, like Hobcaw and Mars Bluff, were established at locations chosen primarily for convenient access to transportation networks, building materials, clientele and labour. The historical record reveals a home front role played by local plantation owners and slaves as shipyard labour. Women served as project fundraisers, shipyard dilettantes, shipwright’s wives and possibly slave mistresses with a paucity of material culture to confirm their presence in the archaeological record. Archaeological investigations on land and underwater yield evidence of artefacts associated with diet, shipbuilding, warfare and ethnicity.

Smart Pipe System for a Shipyard 4.0

PubMed Central

Fraga-Lamas, Paula; Noceda-Davila, Diego; Fernández-Caramés, Tiago M.; Díaz-Bouza, Manuel A.; Vilar-Montesinos, Miguel

2016-01-01

As a result of the progressive implantation of the Industry 4.0 paradigm, many industries are experimenting a revolution that shipyards cannot ignore. Therefore, the application of the principles of Industry 4.0 to shipyards are leading to the creation of Shipyards 4.0. Due to this, Navantia, one of the 10 largest shipbuilders in the world, is updating its whole inner workings to keep up with the near-future challenges that a Shipyard 4.0 will have to face. Such challenges can be divided into three groups: the vertical integration of production systems, the horizontal integration of a new generation of value creation networks, and the re-engineering of the entire production chain, making changes that affect the entire life cycle of each piece of a ship. Pipes, which exist in a huge number and varied typology on a ship, are one of the key pieces, and its monitoring constitutes a prospective cyber-physical system. Their improved identification, traceability, and indoor location, from production and through their life, can enhance shipyard productivity and safety. In order to perform such tasks, this article first conducts a thorough analysis of the shipyard environment. From this analysis, the essential hardware and software technical requirements are determined. Next, the concept of smart pipe is presented and defined as an object able to transmit signals periodically that allows for providing enhanced services in a shipyard. In order to build a smart pipe system, different technologies are selected and evaluated, concluding that passive and active RFID (Radio Frequency Identification) are currently the most appropriate technologies to create it. Furthermore, some promising indoor positioning results obtained in a pipe workshop are presented, showing that multi-antenna algorithms and Kalman filtering can help to stabilize Received Signal Strength (RSS) and improve the overall accuracy of the system. PMID:27999392

Smart Pipe System for a Shipyard 4.0.

PubMed

Fraga-Lamas, Paula; Noceda-Davila, Diego; Fernández-Caramés, Tiago M; Díaz-Bouza, Manuel A; Vilar-Montesinos, Miguel

2016-12-20

As a result of the progressive implantation of the Industry 4.0 paradigm, many industries are experimenting a revolution that shipyards cannot ignore. Therefore, the application of the principles of Industry 4.0 to shipyards are leading to the creation of Shipyards 4.0. Due to this, Navantia, one of the 10 largest shipbuilders in the world, is updating its whole inner workings to keep up with the near-future challenges that a Shipyard 4.0 will have to face. Such challenges can be divided into three groups: the vertical integration of production systems, the horizontal integration of a new generation of value creation networks, and the re-engineering of the entire production chain, making changes that affect the entire life cycle of each piece of a ship. Pipes, which exist in a huge number and varied typology on a ship, are one of the key pieces, and its monitoring constitutes a prospective cyber-physical system. Their improved identification, traceability, and indoor location, from production and through their life, can enhance shipyard productivity and safety. In order to perform such tasks, this article first conducts a thorough analysis of the shipyard environment. From this analysis, the essential hardware and software technical requirements are determined. Next, the concept of smart pipe is presented and defined as an object able to transmit signals periodically that allows for providing enhanced services in a shipyard. In order to build a smart pipe system, different technologies are selected and evaluated, concluding that passive and active RFID (Radio Frequency Identification) are currently the most appropriate technologies to create it. Furthermore, some promising indoor positioning results obtained in a pipe workshop are presented, showing that multi-antenna algorithms and Kalman filtering can help to stabilize Received Signal Strength (RSS) and improve the overall accuracy of the system.

Nasal septum perforation of welders.

PubMed

Lee, Choong Ryeol; Yoo, Cheol In; Lee, Ji ho; Kang, Seong Kyu

2002-07-01

During the periodic physical checkups in 1997-2000, the authors have found eleven cases of nasal septum perforation among 2,869 welders in Ulsan, Korea. They have not suffered from diseases and conditions that could cause septum perforation such as tuberculosis, syphilis, and long-term use of topical corticosteroids. And also they did not have trauma history and surgical experiences on their nasal septum. To investigate the cause of septum perforation we reviewed the past history of pre-employment, the results of annual working environment survey and the material safety data sheets of welding rods and steels with which they have dealt. We also analyzed the concentration of several metals of welding fume and the concentration of blood and urinary chromium. In the result, we assumed that the nasal septum perforation of welders was due to chronic exposure to low-level hexavalent chromium.

Welder's Helper. Coordinator's Guide. Individualized Study Guide. General Metal Trades.

ERIC Educational Resources Information Center

Dean, James W.

This guide provides information to enable coordinators to direct learning activities for students using an individualized study guide on being a welder's helper. The study material is designed for students enrolled in cooperative part-time training and employed, or desiring to be employed, as welders' helpers. Contents include a sample progress…

Are multitasking abilities impaired in welders exposed to manganese? Translating cognitive neuroscience to neurotoxicology.

PubMed

van Thriel, Christoph; Quetscher, Clara; Pesch, Beate; Lotz, Anne; Lehnert, Martin; Casjens, Swaantje; Weiss, Tobias; Van Gelder, Rainer; Plitzke, Katrin; Brüning, Thomas; Beste, Christian

2017-08-01

Manganese (Mn) is an essential trace element with well characterized neurotoxic effects in high concentrations. Neurochemically, the initial neurotoxic effect of Mn is the perturbation of striatal γ-aminobutyric acid levels. Specific tasks for the assessment of cognitive functions subserved by fronto-striatal loops are available as the stop-change task (SCT) assessing control of multi-component behavior and action cascading. In a cross-sectional study, fifty male welders and 28 age-matched controls completed the SCT during a whole day examination. Reaction times, responses accuracy, and event-related potentials (ERPs) from electroencephalogram (EEG) recordings were analyzed. The shift exposure of the welders to respirable Mn was stratified by 20 µg/m 3 in 23 low-exposed (median = 4.7 µg/m 3 ) and 27 high-exposed welders (median = 86.0 µg/m 3 ). Welders graduation was lower and was therefore included in the analyses. The task-related factor (stop-change delay, SCD) modified the responses as expected; however, the lack of an interaction "SCD × group" revealed no differences between welders and controls. EEG data showed that the "SCD" modulated the amplitude of the P3 ERP in controls stronger than in welders. There was no difference between the two groups of welders and no association between airborne or systemic Mn and the P3 ERP. Moreover, the P3 amplitude was smaller in subjects with lower education. These results showed that multitasking performance and cognitive flexibility are not impaired in welders. The electrophysiological results gave a weak hint that relevant neurobiological processes were different in welders as compared to controls but this may be related to lower education.

A clinical assessment of the anterior eye in arc welders.

PubMed

Doughty, Michael J; Oblak, Emil

2005-11-01

Corneal irradiation with high doses of ultraviolet-B (UVB) has been shown to damage the corneal endothelium in animals. Human occupational exposure to ultraviolet radiation (UVR) in welding is considered a risk for endothelial damage but the evidence for such an effect is limited. External eye photographs and non-contact specular micrographs (Topcon SP2000-P) were obtained from 102 white males aged between 32 and 62 years, 51 being arc welders (with 24 +/- 7 years experience) and 51 office workers. Most welders reported repeated occupational exposure to UVR (that is, welder's 'flashes'). Welders reported a higher level of ocular symptoms and a higher prevalence of pingueculae (47 versus 12 per cent), but only one case with pterygium. The average endothelial cell areas were the same in welders and office workers (398 +/- 55 microm(2) versus 400 +/- 56 microm(2); p = 0.868) as were the endothelial cell density (ECD) values (2,555 +/- 342 cells/mm(2) versus 2,541 +/- 308 cells/mm(2); p = 0.825). ECD decreased with years of welding experience (p < 0.01) but not faster than the decrease in ECD due to age. Repeated occupational ultraviolet radiation exposure through welding is not associated with any obvious differences in the corneal endothelium. No differences were observed in either ECD or cell polymegethism. Despite the periodic welding flashes, the exposure levels are below those needed to cause damage to the corneal endothelium.

Pulmonary function abnormalities and airway irritation symptoms of metal fumes exposure on automobile spot welders.

PubMed

Luo, Jiin-Chyuan John; Hsu, Kuang-Hung; Shen, Wu-Shiun

2006-06-01

Spot or resistance welding has been considered less hazardous than other types of welding. Automobile manufacturing is a major industry in Taiwan. Spot and arc welding are common processes in this industry. The respiratory effects on automobile spot welders exposed to metal fumes are investigated. The cohort consisted of 41 male auto-body spot welders, 76 male arc welders, 71 male office workers, and 59 assemblers without welding exposure. Inductivity Coupled Plasma Mass Spectrophotometer (ICP-MS) was applied to detect metals' (zinc, copper, nickel) levels in the post-shift urine samples. Demographic data, work history, smoking status, and respiratory tract irritation symptoms were gathered by a standard self-administered questionnaire. Pulmonary function tests were also performed. There were significantly higher values for average urine metals' (zinc, copper, nickel) levels in spot welders and arc welders than in the non-welding controls. There were 4 out of 23 (17.4%) abnormal forced vital capacity (FVC) among the high-exposed spot welders, 2 out of 18 (11.1%) among the low-exposed spot welders, and 6 out of 130 (4.6%) non-welding-exposed workers. There was a significant linear trend between spot welding exposure and the prevalence of restrictive airway abnormalities (P = 0.036) after adjusting for other factors. There were 9 out of 23 (39.1%) abnormal peak expiratory flow rate (PEFR) among high-exposed spot welders, 5 out of 18 (27.8%) among the low-exposed spot welders, and 28 out of 130 (21.5%) non-welding-exposed workers. There was a borderline significant linear trend between spot welding exposure and the prevalence of obstructive lung function abnormalities (P = 0.084) after adjusting for other factors. There was also a significant dose-response relationship of airway irritation symptoms (cough, phlegm, chronic bronchitis) among the spot welders. Arc welders with high exposure status also had a significant risk of obstructive lung abnormalities (PEFR

CHROMOSOMAL ABNORMALITIES AMONG WELDER TRAINEES

EPA Science Inventory

Serial cytogenetic observations were made on a group of 273 military recruits who were being trained as welders at Aberdeen, Maryland. The trainees were being exposed to presumably increased levels of ozone in the course of their welding school experience, and it was the purpose ...

Assessment of Health Consequences of Steel Industry Welders' Occupational Exposure to Ultraviolet Radiation.

PubMed

Zamanian, Zahra; Mortazavi, Saied Mohammad Javad; Asmand, Ebrahim; Nikeghbal, Kiana

2015-01-01

Welding is among the most important frequently used processes in the industry with a wide range of applications from the food industry to aerospace and from precision tools to shipbuilding. The aim of this study was to assess the level of steel industry welders' exposure to ultraviolet (UV) radiation and to investigate the health impacts of these exposures. In this case-control study, we measured the intensity of UV at the workers' wrist in Fars Steel Company through manufacture of different types of heavy metal structures, using UV-meter model 666230 made by Leybold Co., from Germany. The population under the study comprised 400 people including 200 welders as the exposed group and 200 nonwelders as the unexposed group. The results of the questionnaire were analyzed using SPSS software, version 19. The average, standard deviation, maximum and minimum of the UV at the welders' wrist were 0.362, 0.346, 1.27, and 0.01 μW/cm(2), respectively. There was a significantly (P < 0.01) higher incidence of cataracts, keratoconjunctivitis, dermatitis and erythema in welders than in their nonwelders. This study showed that the time period of UV exposure in welders is higher than the permissible contact threshold level. Therefore, considering the outbreak of the eye and skin disorders in the welders, decreasing exposure time, reducing UV radiation level, and using personal protective equipment seem indispensable. As exposure to UV radiation can be linked to different types of skin cancer, skin aging, and cataract, welders should be advised to decrease their occupational exposures.

Topical ocular anesthetic abuse among Iranian welders: time for action.

PubMed

Sharifi, Ali; Sharifi, Hamid; Karamouzian, Mohammad; Mokhtari, Mahmoud; Esmaeili, Hamidreza Hosein; Nejad, Afshin Sarafi; Rahmatian, Mohammad

2013-01-01

The purpose of this study is to estimate the prevalence of topical ocular anesthetic abuse among welders in Iran and suggest public health solutions for this issue. In this cross-sectional study, 390 welders were randomly recruited and queried on the use of anesthetic drops. A questionnaire was administered through structured one-on-one interviews conducted by the first author. A total of 314 welders (80.5%) declared that they had used topical anesthetics at least once during their working lives. Almost 90% of them stated a preference for self-treatment over seeking help from a physician due to cultural and financial reasons. The most commonly used topical anesthetic was tetracaine. Most of the subjects (97.4%) had obtained the drugs from pharmacies without a prescription. The prevalence of topical ocular anesthetic abuse among welders in Iran is alarmingly high and may partially be due to cultural issues. Although most physicians are aware that topical anesthetics should only be used as a diagnostic tool, there is a crucial need to re-emphasize the ocular risks associated with chronic use of these medications. Educational programs for both physicians and the public are necessary to address the problem.

Chronic bronchitis, work related respiratory symptoms, and pulmonary function in welders in New Zealand.

PubMed

Bradshaw, L M; Fishwick, D; Slater, T; Pearce, N

1998-03-01

A cross sectional study of respiratory symptoms and lung function in welders was performed at eight New Zealand welding sites: 62 current welders and 75 non-welders participated. A questionnaire was administered to record demographic data, smoking habit, and current respiratory symptoms. Current and previous welding exposures were recorded to calculate a total lifetime welding fume exposure index. Forced expiratory volume in one second (FEV1), forced vital capacity (FVC), and peak expiratory flow (PEF) were measured before the start of the shift. There were no significant differences in ethnicity, smoking habits, or years of work experience between welders and non-welders. Symptoms of chronic bronchitis were more common in current welders (11.3%) than in non-welders (5.0%). Of those workers with a cumulative exposure index to welding fume > or = 10 years, 16.7% reported symptoms of chronic bronchitis compared with 4.7% of those with a cumulative exposure index < 4 years (odds ratio (OR) 4.1, 95% confidence interval (95% CI) 0.90 to 17.6). Workers with chronic bronchitis had significantly lower measures of baseline PEF (p = 0.008) and FEV/FVC ratio (p = 0.001) than workers without chronic bronchitis. Multivariate analysis showed that current smoking (OR 9.3, 1.0 to 86.9) and total exposure index to welding fumes > 10 years (OR 9.5, 1.3 to 71.9) were independent risk factors for chronic bronchitis. The report of any work related respiratory symptom was more prevalent in welders (30.7%) than non-welders (15.0%) and workers with these symptoms had significantly lower FEV, (p = 0.004) and FVC (p = 0.04) values. Multivariate analysis identified a high proportion of time spent welding in confined spaces as the main risk factor for reporting these symptoms (OR 2.8, 1.0 to 8.3). This study has documented a high prevalence of symptoms of chronic bronchitis and other work related respiratory symptoms in current welders. Also, workers with chronic bronchitis had reduced PEF

15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. MAP OF ALAMEDA SHIPYARD SHOWING PROPOSED ADDITIONAL FACILITIES. United Engineering Company Ltd., Alameda Shipyard. A site map with all existing structures keyed to an identification legend. Also shows proposed new structures. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2. Plan no. 10,528. Scale one inch to 100 feet. November 12, 1943, last revised 1/18/44. pencil on vellum - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

1. VIEW WESTEAST ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. VIEW WEST-EAST ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

4. VIEW EASTSOUTH ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW EAST-SOUTH ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

Assessment of welders exposure to carcinogen metals from manual metal arc welding in gas transmission pipelines, iran.

PubMed

Golbabaei, F; Seyedsomea, M; Ghahri, A; Shirkhanloo, H; Khadem, M; Hassani, H; Sadeghi, N; Dinari, B

2012-01-01

Welding can produce dangerous fumes containing various metals especially carcinogenic ones. Occupational exposure to welding fumes is associated with lung cancer. Therefore, welders in Gas Transmission Pipelines are known as a high-risk group. This study was designed to determinate the amounts of metals Cr, Ni, and Cd in breathing zone and urine of welders and to assess the possibility of introducing urinary metals as a biomarker due to occupational exposure. In this cross sectional study, 94 individuals from Gas Transmission Pipelines welders, Iran, Borujen in 2011 were selected and classified into 3 groups including Welders, Back Welders and Assistances. The sampling procedures were performed according to NIOSH 7300 for total chromium, nickel, and cadmium and NIOSH 7600 for Cr+6. For all participants urine samples were collected during the entire work shift and metals in urine were determined according to NIOSH 8310. Back Welders and Assistances groups had maximum and minimum exposure to total fume and its elements, respectively. In addition, results showed that there are significant differences (P<0.05) between Welders and Back Welders with Assistances group in exposure with total fume and elements except Ni. Urinary concentrations of three metals including Cr, Cd and Ni among all welders were about 4.5, 12 and 14-fold greater than those detected in controls, respectively. Weak correlations were found between airborne and urinary metals concentrations (R2: Cr=0.45, Cd=0.298, Ni=0.362). Urinary metals concentrations could not be considerate as a biomarker for welders' exposure assessment.

Topical Ocular Anesthetic Abuse Among Iranian Welders: Time for Action

PubMed Central

Sharifi, Ali; Sharifi, Hamid; Karamouzian, Mohammad; Mokhtari, Mahmoud; Esmaeili, Hamidreza Hosein; Nejad, Afshin Sarafi; Rahmatian, Mohammad

2013-01-01

Purpose: The purpose of this study is to estimate the prevalence of topical ocular anesthetic abuse among welders in Iran and suggest public health solutions for this issue. Methods: In this cross-sectional study, 390 welders were randomly recruited and queried on the use of anesthetic drops. A questionnaire was administered through structured one-on-one interviews conducted by the first author. Results: A total of 314 welders (80.5%) declared that they had used topical anesthetics at least once during their working lives. Almost 90% of them stated a preference for self-treatment over seeking help from a physician due to cultural and financial reasons. The most commonly used topical anesthetic was tetracaine. Most of the subjects (97.4%) had obtained the drugs from pharmacies without a prescription. Conclusions: The prevalence of topical ocular anesthetic abuse among welders in Iran is alarmingly high and may partially be due to cultural issues. Although most physicians are aware that topical anesthetics should only be used as a diagnostic tool, there is a crucial need to re-emphasize the ocular risks associated with chronic use of these medications. Educational programs for both physicians and the public are necessary to address the problem. PMID:24339685

Hazard perception and occupational injuries in the welders and lathe machine operators of Rawalpindi and Islamabad.

PubMed

Shaikh, M A

2001-02-01

To study the prevalence of occupational injuries in the welders and lathe machine operators and their hazard perception. This study was conducted in the welders and lathe machine operators working in the welding and metal working shops in Rawalpindi and Islamabad. A cross-sectional survey was conducted by two trained health interviewers using uniform questionnaire with both close and open-ended questions. Two hundred and eight welders and 104 lathe machine operators were interviewed. Thirty nine (18.7%) welders and 27 (26%) lathe machine operators reported an injury in the past three months, while 63 (30.3%) welders and 76 (73.8%) lathe machine operators reported sustaining an injury in the past twelve months. However, only half of the welders and 31 (29.8%) lathe machine operators believed that their occupation was hazardous for health. For effective public health policy there is a need preventive education and enforcement of safety regulations for the informal occupational sector in Pakistan.

Risk Communication as a Tool for Training Apprentice Welders: A Study about Risk Perception and Occupational Accidents

PubMed Central

Cezar-Vaz, Marta Regina; Bonow, Clarice Alves; Rocha, Laurelize Pereira; de Almeida, Marlise Capa Verde; Severo, Luana de Oliveira; Borges, Anelise Miritz; Vaz, Joana Cezar; Turik, Claudia

2012-01-01

The present study has aimed to identify the perceptions of apprentice welders about physical, chemical, biological, and physiological risk factors to which they are exposed; identify types of occupational accidents involving apprentice welders; and report the development of a socioenvironmental education intervention as a tool for risk communication for apprentice welders. A quantitative study was performed with 161 apprentice welders in Southern Brazil in 2011. Data collection was performed via structured interviews with the apprentice welders about risk perception, occupational accidents, and time experienced in welding. The data were analyzed using SPSS 19.0. The participants identified the following risk types: physical (96.9%), chemical (95%), physiological (86.3%), and biological (51.5%). In this sample, 39.7% of apprentice welders reported occupational accidents and 27.3% reported burning. The inferential analysis showed that the frequency of risk perception factors increases with the length of experience, and apprentice welders who have experienced accidents during welding activity perceive a higher amount of risk factors than those who have never experienced them. It is concluded that apprentice welders perceive risks and that they tend to relate risks with the occurrence of occupational accidents as an indicator of the dangerous nature of their activity. PMID:23326211

32 CFR 700.1055 - Command of a naval shipyard.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 5 2013-07-01 2013-07-01 false Command of a naval shipyard. 700.1055 Section 700.1055 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1055 Command of a naval shipyard. The officer detailed to command a naval...

32 CFR 700.1055 - Command of a naval shipyard.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 5 2011-07-01 2011-07-01 false Command of a naval shipyard. 700.1055 Section 700.1055 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1055 Command of a naval shipyard. The officer detailed to command a naval...

32 CFR 700.1055 - Command of a naval shipyard.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Command of a naval shipyard. 700.1055 Section 700.1055 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1055 Command of a naval shipyard. The officer detailed to command a naval...

32 CFR 700.1055 - Command of a naval shipyard.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 5 2014-07-01 2014-07-01 false Command of a naval shipyard. 700.1055 Section 700.1055 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1055 Command of a naval shipyard. The officer detailed to command a naval...

32 CFR 700.1055 - Command of a naval shipyard.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 5 2012-07-01 2012-07-01 false Command of a naval shipyard. 700.1055 Section 700.1055 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1055 Command of a naval shipyard. The officer detailed to command a naval...

Assessment of Welders Exposure to Carcinogen Metals from Manual Metal Arc Welding in Gas Transmission Pipelines, Iran

PubMed Central

Golbabaei, F; Seyedsomea, M; Ghahri, A; Shirkhanloo, H; Khadem, M; Hassani, H; Sadeghi, N; Dinari, B

2012-01-01

Background: Welding can produce dangerous fumes containing various metals especially carcinogenic ones. Occupational exposure to welding fumes is associated with lung cancer. Therefore, welders in Gas Transmission Pipelines are known as a high-risk group. This study was designed to determinate the amounts of metals Cr, Ni, and Cd in breathing zone and urine of welders and to assess the possibility of introducing urinary metals as a biomarker due to occupational exposure. Methods: In this cross sectional study, 94 individuals from Gas Transmission Pipelines welders, Iran, Borujen in 2011 were selected and classified into 3 groups including Welders, Back Welders and Assistances. The sampling procedures were performed according to NIOSH 7300 for total chromium, nickel, and cadmium and NIOSH 7600 for Cr+6. For all participants urine samples were collected during the entire work shift and metals in urine were determined according to NIOSH 8310. Results: Back Welders and Assistances groups had maximum and minimum exposure to total fume and its elements, respectively. In addition, results showed that there are significant differences (P<0.05) between Welders and Back Welders with Assistances group in exposure with total fume and elements except Ni. Urinary concentrations of three metals including Cr, Cd and Ni among all welders were about 4.5, 12 and 14-fold greater than those detected in controls, respectively. Weak correlations were found between airborne and urinary metals concentrations (R2: Cr=0.45, Cd=0.298, Ni=0.362). Conclusion: Urinary metals concentrations could not be considerate as a biomarker for welders’ exposure assessment. PMID:23113226

Assessment of the effect of welding fumes on welders' cognitive failure and health-related quality of life.

PubMed

Rahmani, Abdolrasoul; Golbabaei, Farideh; Dehghan, Somayeh Farhang; Mazlomi, Adel; Akbarzadeh, Arash

2016-09-01

This study examined whether cognitive symptoms and health-related quality of life can be affected by welding fume exposure. Participants consisted of welders (n = 40) and welder assistants (n = 25) from welding units as the exposed group, and office workers (n = 44) as the non-exposed group. All participants were studied using ambient air monitoring and two types of questionnaires: the Cognitive Failures Questionnaire (CFQ) and the 36-item Short Form Health Survey (SF-36). Welders and welder assistants were exposed to higher concentrations of all airborne metals than office employees, except for aluminum and chromium (p < 0.05). Mean (95% confidence interval) CFQ score was higher in welders (26.42 (12.74)) compared with welder assistants (22.68 (14.37)) and the non-exposed group (21.38 (8.75)), although these differences were not statistically significant. Mean total score of the SF-36 significantly differed among the three groups (p < 0.05) and welders had the lowest score (M (SD) = 54.84 (17.88)). The relationships between total CFQ score and the measured concentration of nickel at peak work rate was significant for welders. Cognitive symptoms and health-related quality of life were not related to the measures of welding fume exposure and further research should be performed to find other influencing factors.

The interaction between manganese exposure and alcohol on neurobehavioral outcomes in welders.

PubMed

Ellingsen, Dag G; Kusraeva, Zarina; Bast-Pettersen, Rita; Zibarev, Evgenij; Chashchin, Maxim; Thomassen, Yngvar; Chashchin, Valery

2014-01-01

Neurobehavioral functions were studied in 137 welders exposed to the geometric mean (GM) air concentration of 214 μg/m(3) (range 1-3230) of manganese (Mn) based on the individual mean from two days of air sampling. Only 22 μg/m(3) (GM) was soluble in the artificial lung fluid Hatch solution. The welders were compared to 137 referents (turner/fitters) recruited from the same plants. The GM concentrations of Mn in whole blood (B-Mn) and urine (U-Mn) were 12.8 μg/L and 0.36 μg/g creatinine versus 8.0 μg/L and 0.07 μg/g creatinine in the referents. Alcohol consumption was assessed by measuring carbohydrate deficient transferrin in serum (sCDT). The welders had poorer performance than the referents on the Grooved Pegboard, Finger Tapping, Simple Reaction Time (SRT) and possibly the Maximum Frequency tests. They also reported more subjective symptoms. Welders with sCDT above the upper reference limit had substantially poorer performances on the Grooved Pegboard test, Finger Tapping test and SRT than welders with sCDT below this level. No effect of high sCDT was observed in the referents, indicating an interaction between high sCDT and exposure to Mn for these tests. Self-reported alcohol consumption had no impact on these neurobehavioral test results. A statistically significant difference in the SRT and Grooved Pegboard test results remained after excluding all subjects with sCDT above the normal level, but the difference in test scores between the groups was smaller. These welders also reported more subjective symptoms than the referents. The results suggest that sCDT should be measured in neurobehavioral studies of occupationally Mn exposed populations for a more precise estimation of high alcohol consumption. Copyright © 2013 Elsevier Inc. All rights reserved.

Navy Financial Reporting of Government-Owned Materials Held by Commercial Shipyard Contractors

DTIC Science & Technology

2001-03-02

NAVY FINANCIAL REPORTING OF GOVERNMENT-OWNED MATERIALS HELD BY COMMERCIAL SHIPYARD CONTRACTORS Report No. D-2001-071...A Dates Covered (from... to) ("DD MON YYYY") Title and Subtitle Navy Financial Reporting of Government-Owned Materials Held by Commercial Shipyard... Financial Reporting of Government-Owned Materials Held by Commercial Shipyard Contractors Executive Summary Introduction. We performed this audit in

21. Scrapping In Dry Dock #4. Naval Shipyard Philadelphia. February ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

21. Scrapping In Dry Dock #4. Naval Shipyard Philadelphia. February 18, 1946. Original Photograph In Collection of National Archives, Mid-Atlantic Regional Records Center, Philadelphia. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Dry Dock No. 4, Broad Street south of Government Avenue, Philadelphia, Philadelphia County, PA

The National Shipbuilding Research Program. Shipyard MACT Implementation Plan and Compliance Tools

DTIC Science & Technology

1996-06-01

display a currently valid OMB control number. 1. REPORT DATE JUN 1996 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE The National...ACHIEVABLE CONTROL TECHNOLOGY SECTION TWO: MODEL SHIPYARD IMPLEMENTATION PLAN SECTION THREE: THINNING RATION CALCULATION SHEETS FOR OPTIONS 2 & 3 AND...INTERPRETATION OF THE SHIPYARD MAXIMUM ACHIEVABLE CONTROL TECHNOLOGY EPA’s Maximum Achievable Control Technology Rule for Shipyards: A Plain English

Current and Future Challenges to Resourcing U.S. Navy Public Shipyards

DTIC Science & Technology

carriers. For this reason, the public shipyards are required to maintain core capabilities that the private sector does not maintain. In addition, they are ...has been on the rise. Direct man-days of work assigned to and executed by the shipyards have increased during that time and are planned to continue to...role in future workforce management as the initiatives are broadened. Planned increases in civilian staffing levels are necessary but not sufficient to mitigate near-term execution risk at the shipyards.

Semen quality and sex hormones among mild steel and stainless steel welders: a cross sectional study.

PubMed Central

Bonde, J P

1990-01-01

Welding may be detrimental to the male reproductive system. To test this hypothesis, semen quality was examined in 35 stainless steel welders, 46 mild steel welders, and 54 non-welding metal workers and electricians. These figures represent a participation rate of 37.1% in welders and 36.7% in non-welding subjects. The mean exposure to welding fume particulates was 1.3 mg/m3 (SD 0.8) in stainless steel welders using tungsten inert gas, 3.2 mg/m3 (SD 1.0) in low exposed mild steel welders using manual metal arc or metal active gas (n = 31), and 4.7 mg/m3 (SD 2.1) in high exposed mild steel welders (n = 15). The semen quality of each participant was defined in terms of the mean values of the particular semen parameters in three semen samples delivered at monthly intervals in a period with occupational exposure in a steady state. The sperm concentration was not reduced in either mild steel or stainless steel welders. The sperm count per ejaculate, the proportion of normal sperm forms, the degree of sperm motility, and the linear penetration rate of the sperm were significantly decreased and the sperm concentration of follicle stimulating hormone (FSH) was non-significantly increased in mild steel welders. A dose response relation between exposure to welding fumes and these semen parameters (sperm count excepted) was found. Semen quality decreased and FSH concentrations increased with increasing exposure. Significant deteriorations in some semen parameters were also observed in stainless steel welders. An analysis of information from questionnaires obtained from the whole population including subjects who declined to participate indicated an underestimation of effects due to selection bias. Potential confounding was treated by restriction and statistical analysis. The results support the hypothesis that mild steel welding and to a lesser extent stainless steel welding with tungsten inert gas is associated with reduced semen quality at exposure in the range of the

Semen quality and sex hormones among mild steel and stainless steel welders: a cross sectional study.

PubMed

Bonde, J P

1990-08-01

Welding may be detrimental to the male reproductive system. To test this hypothesis, semen quality was examined in 35 stainless steel welders, 46 mild steel welders, and 54 non-welding metal workers and electricians. These figures represent a participation rate of 37.1% in welders and 36.7% in non-welding subjects. The mean exposure to welding fume particulates was 1.3 mg/m3 (SD 0.8) in stainless steel welders using tungsten inert gas, 3.2 mg/m3 (SD 1.0) in low exposed mild steel welders using manual metal arc or metal active gas (n = 31), and 4.7 mg/m3 (SD 2.1) in high exposed mild steel welders (n = 15). The semen quality of each participant was defined in terms of the mean values of the particular semen parameters in three semen samples delivered at monthly intervals in a period with occupational exposure in a steady state. The sperm concentration was not reduced in either mild steel or stainless steel welders. The sperm count per ejaculate, the proportion of normal sperm forms, the degree of sperm motility, and the linear penetration rate of the sperm were significantly decreased and the sperm concentration of follicle stimulating hormone (FSH) was non-significantly increased in mild steel welders. A dose response relation between exposure to welding fumes and these semen parameters (sperm count excepted) was found. Semen quality decreased and FSH concentrations increased with increasing exposure. Significant deteriorations in some semen parameters were also observed in stainless steel welders. An analysis of information from questionnaires obtained from the whole population including subjects who declined to participate indicated an underestimation of effects due to selection bias. Potential confounding was treated by restriction and statistical analysis. The results support the hypothesis that mild steel welding and to a lesser extent stainless steel welding with tungsten inert gas is associated with reduced semen quality at exposure in the range of the

PANORAMIC VIEW OF SHIPYARD NO. 3, LOOKING SOUTH. FROM LEFT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PANORAMIC VIEW OF SHIPYARD NO. 3, LOOKING SOUTH. FROM LEFT TO CENTER ARE THE FORGE SHOP, MACHINE SHOP, GENERAL WAREHOUSE, AND RIGGERS LOFT/PAINT SHOP/SHEET METAL SHOP. FROM CENTER TO RIGHT ARE THE FIVE BASINS - Rosie the Riveter National Historical Park, Richmond Shipyard No. 3, Point Potrero, Richmond, Contra Costa County, CA

Dummy Cup Helps Robot-Welder Programmers

NASA Technical Reports Server (NTRS)

Gordon, Stephen S.

1990-01-01

Dummy gas cup used on torch of robotic welder during programming and practice runs. Made of metal or plastic, dummy cup inexpensive and durable. Withstands bumps caused by programming errors, and is sized for special welding jobs within limited clearances. After robot satisfactorily programmed, replaced by ceramic cup of same dimensions for actual welding.

[Work-related injuries in Monfalcone shipyard (2000-2010)].

PubMed

Moro, E; Barbina, P; Bovenzi, M; Filon, F Larese

2012-01-01

Shipbuilding industry exhibits higher injury rates at the workplace than those reported in other industrial sectors. Work-related injuries (n = 6714) occurred from 2000 to 2010 at the shipyard of Monfalcone (Gorizia-Italy) were considered. Injury frequency incidence (IF = number of accidents/number of workers x 1000) and injury severity rate were estimated. Among permanent (directly employed) shipyard workers, the IF ranged from 294.6 in 2000 to 113.7 in 2010. Injury severity rates showed the same decreasing trend. The IF for contract workers was unchanged over the calendar period (110.5 in 2000 to 110.9 in 2010) with no significant change in the injury severity rate. These findings suggest an improvement of the working condition for permanent shipyard workers as a result of prevention policies (education and surveillance) and the automation of production processes. Further preventative interventions are suggested to minimize work-related injuries and to promote health and safety in the shipbuilding industry.

Cigarette smoking and hyperglycemia increase renal response to low levels of cadmium in welders: cystatin C as a sensitive marker.

PubMed

Harisa, Gamaleldin I; Attia, Sabry M; Ashour, Abdelkader E; Abdallah, Gamil M; Omran, Gamal A; Touliabah, Hussein E

2014-06-01

The present study was undertaken to investigate the utility of cystatin C (CysC) as an early biomarker of cadmium (Cd)-induced renal injury. The study was carried out on 50 adult male individuals divided into five groups of 10 individuals as follows: control, welders, smoker welders, diabetic welders, and smoker diabetic welders. The results indicated that plasma levels of CysC, creatinine, urea, and uric acid were significantly higher in welders compared to control individuals. In addition, the levels of whole blood Cd, lipid peroxidation, and protein oxidation products as well as erythrocyte osmotic fragility were significantly higher in welders compared to control individuals. In contrast, the levels of plasma albumin and whole blood glutathione were significantly decreased in welders compared to control individuals. The alterations of the measured parameters were enhanced in the presence of smoking and hyperglycemia besides exposure to welding fumes. These results suggest that CysC can be used as a sensitive biomarker of the early stages of Cd-induced renal injury.

The bioavailability of manganese in welders in relation to its solubility in welding fumes.

PubMed

Ellingsen, Dag G; Zibarev, Evgenij; Kusraeva, Zarina; Berlinger, Balazs; Chashchin, Maxim; Bast-Pettersen, Rita; Chashchin, Valery; Thomassen, Yngvar

2013-02-01

Blood and urine samples for determination of manganese (Mn) and iron (Fe) concentrations were collected in a cross-sectional study of 137 currently exposed welders, 137 referents and 34 former welders. Aerosol samples for measurements of personal air exposure to Mn and Fe were also collected. The aerosol samples were assessed for their solubility using a simulated lung lining fluid (Hatch solution). On average 13.8% of the total Mn mass (range 1-49%; N = 237) was soluble (Hatch sol), while only 1.4% (<0.1-10.0%; N = 237) of the total Fe mass was Hatch sol. The welders had statistically significantly higher geometric mean concentrations of Mn in whole blood (B-Mn 12.8 vs. 8.0 μg L (-1)), serum (S-Mn 1.04 vs. 0.77 μg L(-1)) and urine (U-Mn 0.36 vs. 0.07 μg g (-1) cr.) than the referents. Statistically significant univariate correlations were observed between exposure to Hatch sol Mn in the welding aerosol and B-Mn, S-Mn and U-Mn respectively. Pearson's correlation coefficient between mean Hatch sol Mn of two days preceding the collection of biological samples and U-Mn was 0.46 (p < 0.001). The duration of employment as a welder in years was also associated with B-Mn and S-Mn, but not with U-Mn. Statistically significantly higher U-Mn and B-Mn were observed in welders currently exposed to even less than 12 and 6 μg m (-3) Hatchsol Mn, respectively. When using the 95(th) percentile concentration among the referents as a cut-point, 70.0 and 64.5% of the most highly exposed welders exceeded this level with respect to B-Mn and U-Mn. The concentrations of B-Mn, S-Mn and U-Mn were all highly correlated in the welders, but not in the referents.

Awareness of occupational hazards and use of safety measures among welders: a cross-sectional study from eastern Nepal

PubMed Central

Budhathoki, Shyam Sundar; Singh, Suman Bahadur; Sagtani, Reshu Agrawal; Niraula, Surya Raj; Pokharel, Paras Kumar

2014-01-01

Objective The proper use of safety measures by welders is an important way of preventing and/or reducing a variety of health hazards that they are exposed to during welding. There is a lack of knowledge about hazards and personal protective equipments (PPEs) and the use of PPE among the welders in Nepal is limited. We designed a study to assess welders’ awareness of hazards and PPE, and the use of PPE among the welders of eastern Nepal and to find a possible correlation between awareness and use of PPE among them. Materials and methods A cross-sectional study of 300 welders selected by simple random sampling from three districts of eastern Nepal was conducted using a semistructured questionnaire. Data regarding age, education level, duration of employment, awareness of hazards, safety measures and the actual use of safety measures were recorded. Results Overall, 272 (90.7%) welders were aware of at least one hazard of welding and a similar proportion of welders were aware of at least one PPE. However, only 47.7% used one or more types of PPE. Education and duration of employment were significantly associated with the awareness of hazards and of PPE and its use. The welders who reported using PPE during welding were two times more likely to have been aware of hazards (OR=2.52, 95% CI 1.09 to 5.81) and five times more likely to have been aware of PPE compared with the welders who did not report the use of PPE (OR=5.13, 95% CI 2.34 to 11.26). Conclusions The welders using PPE were those who were aware of hazards and PPE. There is a gap between being aware of hazards and PPE (90%) and use of PPE (47%) at work. Further research is needed to identify the underlying factors leading to low utilisation of PPE despite the welders of eastern Nepal being knowledgeable of it. PMID:24889850

Assessment of biological chromium among stainless steel and mild steel welders in relation to welding processes.

PubMed

Edmé, J L; Shirali, P; Mereau, M; Sobaszek, A; Boulenguez, C; Diebold, F; Haguenoer, J M

1997-01-01

Air and biological monitoring were used for assessing external and internal chromium exposure among 116 stainless steel welders (SS welders) using manual metal arc (MMA), metal inert gas (MIG) and tungsten inert gas (TIG) welding processes (MMA: n = 57; MIG: n = 37; TIG: n = 22) and 30 mild steel welders (MS welders) using MMA and MIG welding processes (MMA: n = 14; MIG: n = 16). The levels of atmospheric total chromium were evaluated after personal air monitoring. The mean values for the different groups of SS welders were 201 micrograms/m3 (MMA) and 185 micrograms/m3 (MIG), 52 micrograms/m3 (TIG) and for MS welders 8.1 micrograms/m3 (MMA) and 7.3 micrograms/m3 (MIG). The curve of cumulative frequency distribution from biological monitoring among SS welders showed chromium geometric mean concentrations in whole blood of 3.6 micrograms/l (95th percentile = 19.9), in plasma of 3.3 micrograms/l (95th percentile = 21.0) and in urine samples of 6.2 micrograms/l (95th percentile = 58.0). Among MS welders, mean values in whole blood and plasma were rather more scattered (1.8 micrograms/l, 95th percentile = 9.3 and 1.3 micrograms/l, 95th percentile = 8.4, respectively) and in urine the value was 2.4 micrograms/l (95th percentile = 13.3). The analysis of variance of chromium concentrations in plasma previously showed a metal effect (F = 29.7, P < 0.001), a process effect (F = 22.2, P < 0.0001) but no metal-process interaction (F = 1.3, P = 0.25). Concerning urinary chromium concentration, the analysis of variance also showed a metal effect (F = 30, P < 0.0001), a process effect (F = 72, P < 0.0001) as well as a metal-process interaction (F = 13.2, P = 0.0004). Throughout the study we noted any significant differences between smokers and non-smokers among welders. Taking in account the relationships between chromium concentrations in whole, plasma or urine and the different welding process. MMA-SS is definitely different from other processes because the biological values

49 CFR 192.227 - Qualification of welders.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Qualification of welders. 192.227 Section 192.227 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM...

49 CFR 192.227 - Qualification of welders.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Qualification of welders. 192.227 Section 192.227 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM...

Numerical simulation of groundwater flow at Puget Sound Naval Shipyard, Naval Base Kitsap, Bremerton, Washington

USGS Publications Warehouse

Jones, Joseph L.; Johnson, Kenneth H.; Frans, Lonna M.

2016-08-18

Information about groundwater-flow paths and locations where groundwater discharges at and near Puget Sound Naval Shipyard is necessary for understanding the potential migration of subsurface contaminants by groundwater at the shipyard. The design of some remediation alternatives would be aided by knowledge of whether groundwater flowing at specific locations beneath the shipyard will eventually discharge directly to Sinclair Inlet of Puget Sound, or if it will discharge to the drainage system of one of the six dry docks located in the shipyard. A 1997 numerical (finite difference) groundwater-flow model of the shipyard and surrounding area was constructed to help evaluate the potential for groundwater discharge to Puget Sound. That steady-state, multilayer numerical model with homogeneous hydraulic characteristics indicated that groundwater flowing beneath nearly all of the shipyard discharges to the dry-dock drainage systems, and only shallow groundwater flowing beneath the western end of the shipyard discharges directly to Sinclair Inlet.Updated information from a 2016 regional groundwater-flow model constructed for the greater Kitsap Peninsula was used to update the 1997 groundwater model of the Puget Sound Naval Shipyard. That information included a new interpretation of the hydrogeologic units underlying the area, as well as improved recharge estimates. Other updates to the 1997 model included finer discretization of the finite-difference model grid into more layers, rows, and columns, all with reduced dimensions. This updated Puget Sound Naval Shipyard model was calibrated to 2001–2005 measured water levels, and hydraulic characteristics of the model layers representing different hydrogeologic units were estimated with the aid of state-of-the-art parameter optimization techniques.The flow directions and discharge locations predicted by this updated model generally match the 1997 model despite refinements and other changes. In the updated model, most

[Work schedule of electric welders in heating microclimate].

PubMed

Sorokin, G A; Frolova, N M

2010-01-01

The authors present results of specified hygienically justified timing regulations for setting the variants of work and rest modes within electric welders shift, who work in various postures with variable visual strain while welding in heating microclimate.

TRUSS DETAILS. United Engineering Company Ltd., Alameda Shipyard. Includes crane ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

TRUSS DETAILS. United Engineering Company Ltd., Alameda Shipyard. Includes crane girder section. No architect noted. Drawn by Penney. Plan no. 2-N-7. March 10, 1942, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

Gas tungsten arc welder with electrode grinder

DOEpatents

Christiansen, David W.; Brown, William F.

1984-01-01

A welder for automated closure of fuel pins by a gas tungsten arc process in which a rotating length of cladding is positioned adjacent a welding electrode in a sealed enclosure. An independently movable axial grinder is provided in the enclosure for refurbishing the used electrode between welds.

Three decades of TBT contamination in sediments around a large scale shipyard.

PubMed

Kim, Nam Sook; Shim, Won Joon; Yim, Un Hyuk; Ha, Sung Yong; An, Joon Geon; Shin, Kyung Hoon

2011-08-30

Tributyltin (TBT) contamination in sediments was investigated in the vicinity of a large-scale shipyard in the years after the implementation of a total ban on the use of TBT based antifouling paints in Korea. Extremely high level of TBT (36,292ng Sn/g) in surface sediment was found at a station in front of a drydock and near surface runoff outfall of the shipyard. TBT concentration in surface sediments of Gohyeon Bay, where the shipyard is located, showed an apparent decreased TBT concentration gradient from the shipyard towards the outer bay. The vertical distribution of TBT contamination derived from a sediment core analysis demonstrated a significant positive correlation (r(2)=0.88; p<0.001) with the annual tonnage of ship-construction in the shipyard within the past three decades. TBT concentrations at six stations surveyed before (2003) and seven years after (2010) the total ban showed no significant differences (p>0.05). Despite the ban on the use of TBT, including ocean going vessels, surface sediments are still being heavily contaminated with TBT, and its levels well exceeded the sediment quality guideline or screening values. Copyright © 2011 Elsevier B.V. All rights reserved.

ESP: Economics of Shipyard Painting, Bid Estimating Transfer Study

DTIC Science & Technology

1993-11-10

Estimating Transfer Study Final Report i EXECUTIVE SUMMARY During Phase I of the “Economics of Shipyard Painting” project, it became evident that detail...an SP-3 panel directive to establish a 2nd phase of the “Economics of Shipyard Painting” focussed on applying the detailed data collected in Phase I to...bid-stage estimating. During Phase II, a program was developed that worked in tandem with the detailed data collection effort laid out in Phase I

Increased R2* in the caudate nucleus of asymptomatic welders

PubMed Central

Lee, Eun-Young; Flynn, Michael R.; Du, Guangwei; Li, Yunqing; Lewis, Mechelle M.; Herring, Amy H.; Van Buren, Eric; Van Buren, Scott; Kong, Lan; Fry, Rebecca C.; Snyder, Amanda M.; Connor, James R.; Yang, Qing X.; Mailman, Richard B.; Huang, Xuemei

2017-01-01

Welding has been associated with neurobehavioral disorders. Welding fumes contain several metals including copper (Cu), manganese (Mn), and iron (Fe) that may interact to influence welding-related neuro-toxicity. Although welding-related airborne Fe levels are about ten-fold higher than Mn, previous studies have focused on Mn and its accumulation in the basal ganglia. This study examined differences in the apparent transverse relaxation rates [R2* (1/T2*), estimate of Fe accumulation] in the basal ganglia (caudate nucleus, putamen, and globus pallidus) between welders and controls, and the dose-response relationship between estimated Fe exposure and R2* values. Occupational questionnaires estimated recent and lifetime Fe exposure, and blood Fe levels and brain MRI were obtained. Complete exposure and MRI R2* and R1 (1/T1: measure to estimate Mn accumulation) data from 42 subjects with welding exposure and 29 controls were analyzed. Welders had significantly greater exposure metrics and higher whole blood Fe levels compared to controls. R2* in the caudate nucleus was significantly higher in welders after controlling for age, body mass index, respirator use, caudate R1, and blood metals of Cu and Mn, whereas there was no difference in R1 values in the basal ganglia between groups. The R2* in the caudate nucleus was positively correlated with whole blood Fe concentration. The present study provides the first evidence of higher R2* in the caudate nucleus of welders, which is suggestive of increased Fe accumulation in this area. Further studies are needed to replicate the findings and determine the neurobehavioral relevance. PMID:27871916

Increased R2* in the Caudate Nucleus of Asymptomatic Welders

PubMed Central

Lee, Eun-Young; Flynn, Michael R.; Du, Guangwei; Li, Yunqing; Lewis, Mechelle M.; Herring, Amy H.; Van Buren, Eric; Van Buren, Scott; Kong, Lan; Fry, Rebecca C.; Snyder, Amanda M.; Connor, James R.; Yang, Qing X.; Mailman, Richard B.; Huang, Xuemei

2016-01-01

Welding has been associated with neurobehavioral disorders. Welding fumes contain several metals including copper (Cu), manganese (Mn), and iron (Fe) that may interact to influence welding-related neurotoxicity. Although welding-related airborne Fe levels are about 10-fold higher than Mn, previous studies have focused on Mn and its accumulation in the basal ganglia. This study examined differences in the apparent transverse relaxation rates [R2* (1/T2*), estimate of Fe accumulation] in the basal ganglia (caudate nucleus, putamen, and globus pallidus) between welders and controls, and the dose–response relationship between estimated Fe exposure and R2* values. Occupational questionnaires estimated recent and lifetime Fe exposure, and blood Fe levels and brain magnetic resonance imaging (MRI) were obtained. Complete exposure and MRI R2* and R1 (1/T1: measure to estimate Mn accumulation) data from 42 subjects with welding exposure and 29 controls were analyzed. Welders had significantly greater exposure metrics and higher whole-blood Fe levels compared with controls. R2* in the caudate nucleus was significantly higher in welders after controlling for age, body mass index, respirator use, caudate R1, and blood metals of Cu and Mn, whereas there was no difference in R1 values in the basal ganglia between groups. The R2* in the caudate nucleus was positively correlated with whole-blood Fe concentration. This study provides the first evidence of higher R2* in the caudate nucleus of welders, which is suggestive of increased Fe accumulation in this area. Further studies are needed to replicate the findings and determine the neurobehavioral relevance. PMID:26769335

Manganese Accumulation in the Olfactory Bulbs and Other Brain Regions of “Asymptomatic” Welders

PubMed Central

Sen, Suman; Flynn, Michael R.; Du, Guangwei; Tröster, Alexander I.; An, Hongyu; Huang, Xuemei

2011-01-01

Welding-generated metallic fumes contain a substantial amount of manganese (Mn), making welders susceptible to Mn toxicity. Although overt Mn toxicity manifests as a type of parkinsonism, the consequences of chronic, low-level Mn exposure are unknown. To explore region-specific Mn accumulation and its potential functional consequences at subclinical levels of Mn exposure, we studied seven welders without obvious neurological deficits and seven age- and gender-matched controls. Mn exposure for welders was estimated by an occupational questionnaire. High-resolution brain magnetic resonance imaging (MRI), Grooved Pegboard performance of both hands, Trail making, and olfactory function tests were obtained from all subjects. Compared with controls, the welders had a significantly higher T1 relaxation rate (R1) in the olfactory bulb (OB, p = 0.02), mean T1-weighted intensity at frontal white matter (FWM; p = 0.01), bilateral globus pallidus (GP; p = 0.03), and putamen (p = 0.03). The welders scored worse than the controls on the Grooved Pegboard test for both dominant (p = 0.06) and nondominant hand (p = 0.03). The dominant hand Grooved Pegboard scores correlated best with mean MRI intensity of FWM (R2 = 0.51, p = 0.004), GP (R2 = 0.51, p = 0.004), putamen (R2 = 0.49, p= 0.006), and frontal gray matter (R2 = 0.42, p = 0.01), whereas the nondominant hand scores correlated best with intensity of FWM (R2 = 0.37, p = 0.02) and GP (R2 = 0.28, p = 0.05). No statistical differences were observed in either the Trail-making test or the olfactory test between the two groups. This study suggests that Mn accumulates in OB and multiple other brain regions in “asymptomatic” welders and that MRI abnormalities correlate with fine motor but not cognitive deficits. Further investigations of subclinical Mn exposure are warranted. PMID:21307282

48 CFR 1371.105 - Foreseeable cost factors pertaining to different shipyard locations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... pertaining to different shipyard locations. 1371.105 Section 1371.105 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE DEPARTMENT SUPPLEMENTAL REGULATIONS ACQUISITIONS INVOLVING SHIP CONSTRUCTION AND SHIP... locations. Insert provision 1352.271-74, Foreseeable Cost Factors Pertaining to Different Shipyard Locations...

48 CFR 1371.105 - Foreseeable cost factors pertaining to different shipyard locations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... pertaining to different shipyard locations. 1371.105 Section 1371.105 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE DEPARTMENT SUPPLEMENTAL REGULATIONS ACQUISITIONS INVOLVING SHIP CONSTRUCTION AND SHIP... locations. Insert provision 1352.271-74, Foreseeable Cost Factors Pertaining to Different Shipyard Locations...

48 CFR 1371.105 - Foreseeable cost factors pertaining to different shipyard locations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... pertaining to different shipyard locations. 1371.105 Section 1371.105 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE DEPARTMENT SUPPLEMENTAL REGULATIONS ACQUISITIONS INVOLVING SHIP CONSTRUCTION AND SHIP... locations. Insert provision 1352.271-74, Foreseeable Cost Factors Pertaining to Different Shipyard Locations...

48 CFR 1371.105 - Foreseeable cost factors pertaining to different shipyard locations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... pertaining to different shipyard locations. 1371.105 Section 1371.105 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE DEPARTMENT SUPPLEMENTAL REGULATIONS ACQUISITIONS INVOLVING SHIP CONSTRUCTION AND SHIP... locations. Insert provision 1352.271-74, Foreseeable Cost Factors Pertaining to Different Shipyard Locations...

48 CFR 1371.105 - Foreseeable cost factors pertaining to different shipyard locations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... pertaining to different shipyard locations. 1371.105 Section 1371.105 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE DEPARTMENT SUPPLEMENTAL REGULATIONS ACQUISITIONS INVOLVING SHIP CONSTRUCTION AND SHIP... locations. Insert provision 1352.271-74, Foreseeable Cost Factors Pertaining to Different Shipyard Locations...

STATION BUILDING. United Engineering Company Ltd., Alameda Shipyard, Ship Repair ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

STATION BUILDING. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities. Plan, elevations, sections, details. Austin Willmott Earl, Consulting Engineer, 233 Sansome Street, San Francisco, California. Drawing no. 504. Various scales. January 20, 1945, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, amendments 4 & 5. blueprint - United Engineering Company Shipyard, Electrical Services & Switching Station, 2900 Main Street, Alameda, Alameda County, CA

14. DREDGING MAP. United Engineering Company Ltd., Alameda Shipyard. Ship ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. DREDGING MAP. United Engineering Company Ltd., Alameda Shipyard. Ship repair facilities dredging map. No architect noted. Drawn by "J.H." (John Hudspeth?). Sheet 1. Plan no. 10,529. Scale one inch to 50 feet. September 22, 1943. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 18, 1943. blueprint - United Engineering Company Shipyard, 2900 Main Street, Alameda, Alameda County, CA

33 CFR 165.1336 - Regulated Navigation Area; Pacific Sound Resources and LockheedShipyard Superfund Sites, Elliott...

Code of Federal Regulations, 2014 CFR

2014-07-01

...; Pacific Sound Resources and LockheedShipyard Superfund Sites, Elliott Bay, Seattle, WA. 165.1336 Section... Area; Pacific Sound Resources and LockheedShipyard Superfund Sites, Elliott Bay, Seattle, WA. (a... Pacific Sound Resources and Lockheed Shipyard EPA superfund sites. Vessels may otherwise transit or...

33 CFR 165.1336 - Regulated Navigation Area; Pacific Sound Resources and LockheedShipyard Superfund Sites, Elliott...

Code of Federal Regulations, 2013 CFR

2013-07-01

...; Pacific Sound Resources and LockheedShipyard Superfund Sites, Elliott Bay, Seattle, WA. 165.1336 Section... Area; Pacific Sound Resources and LockheedShipyard Superfund Sites, Elliott Bay, Seattle, WA. (a... Pacific Sound Resources and Lockheed Shipyard EPA superfund sites. Vessels may otherwise transit or...

33 CFR 165.1336 - Regulated Navigation Area; Pacific Sound Resources and LockheedShipyard Superfund Sites, Elliott...

Code of Federal Regulations, 2012 CFR

2012-07-01

...; Pacific Sound Resources and LockheedShipyard Superfund Sites, Elliott Bay, Seattle, WA. 165.1336 Section... Area; Pacific Sound Resources and LockheedShipyard Superfund Sites, Elliott Bay, Seattle, WA. (a... Pacific Sound Resources and Lockheed Shipyard EPA superfund sites. Vessels may otherwise transit or...

New shipyard layout design for the preliminary phase & case study for the green field project

NASA Astrophysics Data System (ADS)

Song, Young Joo; Woo, Jong Hun

2013-03-01

For several decades, Asian nations such as Korea, Japan and China have been leading the shipbuilding industry since the decline in Europe and America. However, several developing countries such as India, Brazil, etc. are going to make an entrance into the shipbuilding industry. These developing countries are finding technical partners or information providers because they are in situation of little experiences and technologies. Now, the shipbuilding engineering companies of shipbuilding advanced countries are getting a chance of engineering business against those developing countries. The starting point of this business model is green field project for the construction of new shipyard. This business model is started with a design of the shipyard layout. For the conducting of the shipyard layout design, four kinds of engineering parts are required. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is the foundation of the other engineering parts and it determines the shipyard capacity during the shipyard operation lifecycle. Previous researches about the shipyard layout design are out of the range from the business requirements because most research cases are in the tower of ivory, which means that there are little consideration of real ship and shipbuilding operation. In this paper, a shipyard layout design for preliminary phase is conducted for the target of newly planned shipyard at Venezuela of South America with an integrated method that is capable of dealing with actual master data from the shipyard. The layout design method of this paper is differentiated from the previous researches in that the actual product data from the target ship and the actual shipbuilding operation data are used for the required area estimation.

49 CFR Appendix C to Part 192 - Qualification of Welders for Low Stress Level Pipe

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Qualification of Welders for Low Stress Level Pipe C Appendix C to Part 192 Transportation Other Regulations Relating to Transportation (Continued.... C Appendix C to Part 192—Qualification of Welders for Low Stress Level Pipe I. Basic test. The test...

49 CFR Appendix C to Part 192 - Qualification of Welders for Low Stress Level Pipe

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Qualification of Welders for Low Stress Level Pipe C Appendix C to Part 192 Transportation Other Regulations Relating to Transportation (Continued.... C Appendix C to Part 192—Qualification of Welders for Low Stress Level Pipe I. Basic test. The test...

49 CFR Appendix C to Part 192 - Qualification of Welders for Low Stress Level Pipe

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Qualification of Welders for Low Stress Level Pipe C Appendix C to Part 192 Transportation Other Regulations Relating to Transportation (Continued.... C Appendix C to Part 192—Qualification of Welders for Low Stress Level Pipe I. Basic test. The test...

49 CFR Appendix C to Part 192 - Qualification of Welders for Low Stress Level Pipe

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Qualification of Welders for Low Stress Level Pipe C Appendix C to Part 192 Transportation Other Regulations Relating to Transportation (Continued.... C Appendix C to Part 192—Qualification of Welders for Low Stress Level Pipe I. Basic test. The test...

49 CFR Appendix C to Part 192 - Qualification of Welders for Low Stress Level Pipe

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Qualification of Welders for Low Stress Level Pipe C Appendix C to Part 192 Transportation Other Regulations Relating to Transportation (Continued.... C Appendix C to Part 192—Qualification of Welders for Low Stress Level Pipe I. Basic test. The test...

PLANS & ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard. Also ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PLANS & ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard. Also includes door schedule and a small scale plot plan. No architect noted. Drawn by W.H.H. Plan no. 2-N-5 (U.E. Co. plan no. 10,523). Scale 1/8 inch to the foot. March 10, 1942, last revised 10/6/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

Mitigation measures of electromagnetic field exposure in the vicinity of high frequency welders.

PubMed

Zubrzak, Bartłomiej; Bieńkowski, Paweł; Cała, Pawel

2017-10-17

Presented information about the welding process and equipment, focusing on the emission of electromagnetic field (EMF) with levels significant in terms of the labor safety regulations in force in Poland - the ordinances of the Minister of Family, Labour and Social Policy that came into force on June 27, 2016 and June 29, 2016 - emerged due to harmonization with European Union directive 2013/35/EU of 26 June 2013 of the European Parliament and the Council. They presented methods of determination of the EMF distribution in the welding machine surroundings and analyzed the background knowledge from the available literature. The subject of the analysis included popular high frequency welders widely used in the industry. Electromagnetic field measurements were performed in the welder operating place (in situ) during machine normal operations, using measurement methods accordant with labor safety regulations in force in Poland and according to the same guidelines, the EMF distributions and parameters having been described. They presented various scenarios of particular, real examples of excessive exposure to EMF in the dielectric welder surroundings and showed solutions, ranging from simple and costless and ending on dedicated electromagnetic shielding systems, which allowed to reduce EMF exposure in some cases of more than 80% (protection zone ranges) or eliminate dangerous zone presence. It has shown that in the dielectric welders surrounding, significant EMF strength levels may be the result of errors or omissions which often occur during development, installation, operation or modification of welding machines. It has allowed to present the measures that may significantly reduce the exposure to EMF of workers in the welder surroundings. The role of accredited laboratories in helping in such cases was underlined. Med Pr 2017;68(6):693-703. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Virtual reality welder training

NASA Astrophysics Data System (ADS)

White, Steven A.; Reiners, Dirk; Prachyabrued, Mores; Borst, Christoph W.; Chambers, Terrence L.

2010-01-01

This document describes the Virtual Reality Simulated MIG Lab (sMIG), a system for Virtual Reality welder training. It is designed to reproduce the experience of metal inert gas (MIG) welding faithfully enough to be used as a teaching tool for beginning welding students. To make the experience as realistic as possible it employs physically accurate and tracked input devices, a real-time welding simulation, real-time sound generation and a 3D display for output. Thanks to being a fully digital system it can go beyond providing just a realistic welding experience by giving interactive and immediate feedback to the student to avoid learning wrong movements from day 1.

Alteration of serum concentrations of manganese, iron, ferritin, and transferrin receptor following exposure to welding fumes among career welders.

PubMed

Lu, Ling; Zhang, Long-Lian; Li, G Jane; Guo, Wenrui; Liang, Wannian; Zheng, Wei

2005-03-01

This study was performed to determine airborne manganese levels during welding practice and to establish the relationship between long-term, low-level exposure to manganese and altered serum concentrations of manganese, iron, and proteins associated with iron metabolism in career welders. Ninety-seven welders (average age of 36 years) who have engaged in electric arc weld in a vehicle manufacturer were recruited as the exposed group. Welders worked 7-8h per day with employment duration of 1-33 years. Control subjects consisted of 91 employees (average age of 35 years) in the same factory but not in the welding profession. Ambient manganese levels in welders' breathing zone were the highest inside the vehicle (1.5 +/- 0.7 mg/m3), and the lowest in the center of the workshop (0.2 +/- 0.05 mg/m3). Since the filter size was 0.8 microm, it is possible that these values may be likely an underestimation of the true manganese levels. Serum levels of manganese and iron in welders were about three-fold (p < 0.01) and 1.2-fold (p < 0.01), respectively, higher than those of controls. Serum concentrations of ferritin and transferrin were increased among welders, while serum transferrin receptor levels were significantly decreased in comparison to controls. Linear regression analyses revealed a lack of association between serum levels of manganese and iron. However, serum concentrations of iron and ferritin were positively associated with years of welder experience (p < 0.05). Moreover, serum transferrin receptor levels were inversely associated with serum manganese concentrations (p < 0.05). These findings suggest that exposure to welding fume among welders disturbs serum homeostasis of manganese, iron, and the proteins associated with iron metabolism. Serum manganese may serve as a reasonable biomarker for assessment of recent exposure to airborne manganese.

WAREHOUSE END FRAMING. United Engineering Company Ltd., Alameda Shipyard. Sections ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

WAREHOUSE END FRAMING. United Engineering Company Ltd., Alameda Shipyard. Sections at north and detail sections. No architect noted. Drawn by Penney. Plan no. 2-N-9 (U.E. Co. plan no. 10,523). Scales 1/4 inch and 1 inch to the foot. March 10, 1942, no revisions. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76, item no. 22A. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Warehouse, 2900 Main Street, Alameda, Alameda County, CA

Levels and predictors of airborne and internal exposure to manganese and iron among welders.

PubMed

Pesch, Beate; Weiss, Tobias; Kendzia, Benjamin; Henry, Jana; Lehnert, Martin; Lotz, Anne; Heinze, Evelyn; Käfferlein, Heiko Udo; Van Gelder, Rainer; Berges, Markus; Hahn, Jens-Uwe; Mattenklott, Markus; Punkenburg, Ewald; Hartwig, Andrea; Brüning, Thomas

2012-01-01

We investigated airborne and internal exposure to manganese (Mn) and iron (Fe) among welders. Personal sampling of welding fumes was carried out in 241 welders during a shift. Metals were determined by inductively coupled plasma mass spectrometry. Mn in blood (MnB) was analyzed by graphite furnace atom absorption spectrometry. Determinants of exposure levels were estimated with multiple regression models. Respirable Mn was measured with a median of 62 (inter-quartile range (IQR) 8.4-320) μg/m(3) and correlated with Fe (r=0.92, 95% CI 0.90-0.94). Inhalable Mn was measured with similar concentrations (IQR 10-340 μg/m(3)). About 70% of the variance of Mn and Fe could be explained, mainly by the welding process. Ventilation decreased exposure to Fe and Mn significantly. Median concentrations of MnB and serum ferritin (SF) were 10.30 μg/l (IQR 8.33-13.15 μg/l) and 131 μg/l (IQR 76-240 μg/l), respectively. Few welders were presented with low iron stores, and MnB and SF were not correlated (r=0.07, 95% CI -0.05 to 0.20). Regression models revealed a significant association of the parent metal with MnB and SF, but a low fraction of variance was explained by exposure-related factors. Mn is mainly respirable in welding fumes. Airborne Mn and Fe influenced MnB and SF, respectively, in welders. This indicates an effect on the biological regulation of both metals. Mn and Fe were strongly correlated, whereas MnB and SF were not, likely due to higher iron stores among welders.

77 FR 19737 - The Asbestos in Shipyards Standard; Extension of the Office of Management and Budget's Approval...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

... Asbestos in Shipyards Standard; Extension of the Office of Management and Budget's Approval of Information... specified in the Asbestos in Shipyards Standard (29 CFR 1915.1001). DATES: Comments must be submitted... information (29 U.S.C. 657). The information collection requirements specified in the Asbestos in Shipyards...

Characterization of Tungsten Inert Gas (TIG) Welding Fume Generated by Apprentice Welders

PubMed Central

Graczyk, Halshka; Lewinski, Nastassja; Zhao, Jiayuan; Concha-Lozano, Nicolas; Riediker, Michael

2016-01-01

Tungsten inert gas welding (TIG) represents one of the most widely used metal joining processes in industry. Its propensity to generate a greater portion of welding fume particles at the nanoscale poses a potential occupational health hazard for workers. However, current literature lacks comprehensive characterization of TIG welding fume particles. Even less is known about welding fumes generated by welding apprentices with little experience in welding. We characterized TIG welding fume generated by apprentice welders (N = 20) in a ventilated exposure cabin. Exposure assessment was conducted for each apprentice welder at the breathing zone (BZ) inside of the welding helmet and at a near-field (NF) location, 60cm away from the welding task. We characterized particulate matter (PM4), particle number concentration and particle size, particle morphology, chemical composition, reactive oxygen species (ROS) production potential, and gaseous components. The mean particle number concentration at the BZ was 1.69E+06 particles cm−3, with a mean geometric mean diameter of 45nm. On average across all subjects, 92% of the particle counts at the BZ were below 100nm. We observed elevated concentrations of tungsten, which was most likely due to electrode consumption. Mean ROS production potential of TIG welding fumes at the BZ exceeded average concentrations previously found in traffic-polluted air. Furthermore, ROS production potential was significantly higher for apprentices that burned their metal during their welding task. We recommend that future exposure assessments take into consideration welding performance as a potential exposure modifier for apprentice welders or welders with minimal training. PMID:26464505

[Contemporary solutions for better air quality at electric welders workplace].

PubMed

Markova, O L; Ivanova, E V

2015-01-01

The article deals with hygienic evaluation of electric welder's workplace, concerning chemical factor, with technical solutions on organization of supply-and-exhaust ventilation and methods to improve air quality in various welding tasks.

Hearing loss in shipyard employees

PubMed Central

Alexopoulos, Evangelos C.; Tsouvaltzidou, Thomaella

2015-01-01

Background: Noise-induced hearing loss (NIHL) is one of the most prevalent occupational illnesses, with a higher incidence in the heavy industry. Objectives of the Study: The aim of this study is to investigate the prevalence of NIHL in Greece and explore its correlations with other job and individual-related factors. Materials and Methods: Questionnaires were administered, and audiograms were conducted to 757 employees of a shipyard company in Greece, both white- and blue-collar, during the period 2006–2009. A modification of the 1979' equation of the American Academy of Otolaryngology was used to calculate hearing loss. Statistical analysis was conducted by means of the SPSS v. 17. Results: A 27.1% of the employees were hearing handicap. Hearing loss was correlated with age, past medical history of ear disease (Meniere's disease, acoustic neuroma, otosclerosis) or injury, hyperlipidemia, job title and level of education. A few questions on subjective hearing ability and symptoms showed strong discriminatory power of hearing pathology. Conclusions: The results of this study emphasize the burden of disease in the shipyard industry, and the need for continuous monitoring, implementation of preventive measures and hearing conservation programs. PMID:26023266

20. Scrapping C112 U.S.S. Marblehead. Naval Shipyard Philadelphia. January 10, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. Scrapping C1-12 U.S.S. Marblehead. Naval Shipyard Philadelphia. January 10, 1946. Original Photograph In Collection of National Archives, Mid-Atlantic Regional Records Center, Philadelphia. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Dry Dock No. 4, Broad Street south of Government Avenue, Philadelphia, Philadelphia County, PA

Manganese in plasma: a promising biomarker of exposure to Mn in welders. A pilot study.

PubMed

Hoet, Perrine; Vanmarcke, Els; Geens, Tom; Deumer, Gladys; Haufroid, Vincent; Roels, Harry A

2012-08-13

There is raising concern about the potential neurotoxic effects of manganese (Mn) inhalation exposure in welders. Because most of the airborne particles in welding fume are in the respirable fraction, their bioavailability is likely to be higher than for coarser dust exposure. No well-validated biomarker for Mn exposure is available. To investigate the interest of measuring Mn in plasma (Mn-P) and urine (Mn-U) as biomarkers of exposure in a group of 28 welders whose tasks were only welding-related. Ambient air exposure to Mn (Mn-air) was determined by personal full-shift measurements on Monday and Tuesday. On the same days, blood and urine samples were collected before and after the shift. Mn-air varied from 1.3 to 729 μg/m(3) (GM 27.7). For Mn-U 65% of the values in welders were below the LOQ (0.20 μg/L). Compared to controls, the welders' Mn-P averaged 33% higher (1.5 vs 2.0 μg/L). In welders, the after-shift Mn-P values correlated well with Mn-air above 10 μg/m(3). In spite of similar Mn-air exposure on Monday and Tuesday, the relationships between Mn-air and after-shift Mn-P strikingly differed on Tuesday in that the inflection in the relationship was less obvious and the slope of the regression line (Mn-P after-shift/logMn-air) for a doubling of logMn-air was 2.3 times lower than on Monday. On Monday (the first day of the workweek), a Mn-P value of 2 μg/L could distinguish Mn-air exposure above or below 20 μg/m(3) with a sensitivity of 69% and a specificity of 82%. This preliminary study indicates that Mn-P is a promising biomarker of current exposure to Mn in welders and lends biological plausibility to the intended change for the Mn TLV-TWA of 20 μg/m(3) proposed by ACGIH for respirable Mn particulate. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Parkinsonism due to manganism in a welder: neurological and neuropsychological sequelae.

PubMed

Bowler, Rosemarie M; Koller, William; Schulz, Paul E

2006-05-01

A 33-year-old welder with 3 years of exposure to manganese (Mn) bearing welding fumes was seen by neurologists for cognitive and motor complaints. He exhibited signs and symptoms of Parkinson's disease, including tremor, bradykinesia, gait disturbance and cogwheel rigidity. However, he was young and had significant inattention and forgetfulness, had found levodopa unhelpful and moved with a cock-walk gait, all of which suggested manganism. His serum and urine levels of Mn were, in fact, elevated, and his brain MRI had increased T1-weighted signal intensities in the basal ganglia bilaterally (globus pallidus) consistent with Mn deposition. Two years later, he underwent comprehensive neuropsychological testing. Clinical history indicated a mild tremor and emotional dysfunction with irritability, anxiety, and depression with psychotic features. He showed deficits in cognitive flexibility, information processing and speed, and greatly reduced motor speed, which are consistent with a fronto-subcortical process. These findings support a diagnosis of early onset parkinsonism from welding.

Cancer occurrence in shipyard workers exposed to asbestos in Hawaii.

PubMed

Kolonel, L N; Yoshizawa, C N; Hirohata, T; Myers, B C

1985-08-01

Because large numbers of persons were employed in United States shipyards during World War II, the long-term risks for cancer associated with asbestos exposure in this setting are of great concern. We report here on the mortality findings after up to 29 years of follow-up on a retrospective cohort of 7971 male Pearl Harbor Naval Shipyard workers, which included more than 3000 men whose employment period spanned the World War II years. Compared with the general population of Hawaii, workers in the shipyard cohort had no increase in total mortality or in total cancer mortality irrespective of the duration of their exposure. However, the risk ratio for lung cancer among workers with at least 15 years of asbestos exposure was 1.4 overall (95% confidence interval, 1.0 to 2.0) and 1.7 for those with a latency interval of 30 or more years (95% confidence interval, 1.0 to 2.5). In addition, seven mesotheliomas occurred between 1977 and 1982 in a subset of the cohort, consisting of 7029 Hawaii residents who are being followed prospectively for cancer incidence. This represented an incidence of 67.3 per million men per year, compared with a rate of 5.8 for the state as a whole. These results suggest that the long-term relative increase in risk for mesothelioma may be even greater than that for bronchogenic carcinoma in this and other cohorts of United States shipyard workers exposed to asbestos.

Role of metal oxide nanoparticles in histopathological changes observed in the lung of welders

PubMed Central

2014-01-01

Background Although major concerns exist regarding the potential consequences of human exposure to nanoparticles (NP), no human toxicological data is currently available. To address this issue, we took welders, who present various adverse respiratory outcomes, as a model population of occupational exposure to NP. The aim of this study was to evaluate if welding fume-issued NP could be responsible, at least partially, in the lung alterations observed in welders. Methods A combination of imaging and material science techniques including ((scanning) transmission electron microscopy ((S)TEM), energy dispersive X-ray (EDX), and X-ray microfluorescence (μXRF)), was used to characterize NP content in lung tissue from 21 welders and 21 matched control patients. Representative NP were synthesized, and their effects on macrophage inflammatory secretome and migration were evaluated, together with the effect of this macrophage inflammatory secretome on human lung primary fibroblasts differentiation. Results Welding-related NP (Fe, Mn, Cr oxides essentially) were identified in lung tissue sections from welders, in macrophages present in the alveolar lumen and in fibrous regions. In vitro macrophage exposure to representative NP (Fe2O3, Fe3O4, MnFe2O4 and CrOOH) induced the production of a pro-inflammatory secretome (increased production of CXCL-8, IL-1ß, TNF-α, CCL-2, −3, −4, and to a lesser extent IL-6, CCL-7 and −22), and all but Fe3O4 NP induce an increased migration of macrophages (Boyden chamber). There was no effect of NP-exposed macrophage secretome on human primary lung fibroblasts differentiation. Conclusions Altogether, the data reported here strongly suggest that welding-related NP could be responsible, at least in part, for the pulmonary inflammation observed in welders. These results provide therefore the first evidence of a link between human exposure to NP and long-term pulmonary effects. PMID:24885771

EXTERIOR ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard, Ship Repair ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

EXTERIOR ELEVATIONS. United Engineering Company Ltd., Alameda Shipyard, Ship Repair Facilities, Office Building. Includes lettering detail for front elevation. John Hudspeth, Architect, at foot of Main Street, Alameda, Calif. Sheet no. A3 of 8 sheets, Plan no. 10,007. Scale 1/8 inch to the foot. March 18, 1942, last revised 9/21/43. U.S. Navy, Bureau of Yards & Docks, Contract no. bs 76. Approved for construction October 9, 1943. blueprint - United Engineering Company Shipyard, Office Building No. 137, 2900 Main Street, Alameda, Alameda County, CA

Characterization of Tungsten Inert Gas (TIG) Welding Fume Generated by Apprentice Welders.

PubMed

Graczyk, Halshka; Lewinski, Nastassja; Zhao, Jiayuan; Concha-Lozano, Nicolas; Riediker, Michael

2016-03-01

Tungsten inert gas welding (TIG) represents one of the most widely used metal joining processes in industry. Its propensity to generate a greater portion of welding fume particles at the nanoscale poses a potential occupational health hazard for workers. However, current literature lacks comprehensive characterization of TIG welding fume particles. Even less is known about welding fumes generated by welding apprentices with little experience in welding. We characterized TIG welding fume generated by apprentice welders (N = 20) in a ventilated exposure cabin. Exposure assessment was conducted for each apprentice welder at the breathing zone (BZ) inside of the welding helmet and at a near-field (NF) location, 60cm away from the welding task. We characterized particulate matter (PM4), particle number concentration and particle size, particle morphology, chemical composition, reactive oxygen species (ROS) production potential, and gaseous components. The mean particle number concentration at the BZ was 1.69E+06 particles cm(-3), with a mean geometric mean diameter of 45nm. On average across all subjects, 92% of the particle counts at the BZ were below 100nm. We observed elevated concentrations of tungsten, which was most likely due to electrode consumption. Mean ROS production potential of TIG welding fumes at the BZ exceeded average concentrations previously found in traffic-polluted air. Furthermore, ROS production potential was significantly higher for apprentices that burned their metal during their welding task. We recommend that future exposure assessments take into consideration welding performance as a potential exposure modifier for apprentice welders or welders with minimal training. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Comparison of the Navy Working Capital Fund and Mission Funding as Applied to Navy Shipyards

DTIC Science & Technology

2006-06-01

Working Capital Fund and the mission funding model in the context of a Navy shipyard environment and determines whether the change in financial structure provides an overall benefit that should be pursued for all shipyards.

Shipyard Standards Program Development Guide

DTIC Science & Technology

1992-10-01

Given the opportunity, designers will use designs that have worked for them in the past . Unfortunately, not all designers have the same experience base...standards formally approved by shipyard management? The subject of labor productivity standards has received considerable attention during the past decade. A...research into this consideration during the past decade. References [23], [24], [25], [26], and [27] have reported beneficial results obtained by getting the

Impact of different welding techniques on biological effect markers in exhaled breath condensate of 58 mild steel welders.

PubMed

Hoffmeyer, Frank; Raulf-Heimsoth, Monika; Lehnert, Martin; Kendzia, Benjamin; Bernard, Sabine; Berresheim, Hans; Düser, Maria; Henry, Jana; Weiss, Tobias; Koch, Holger M; Pesch, Beate; Brüning, Thomas

2012-01-01

Total mass and composition of welding fumes are predominantly dependent on the welding technique and welding wire applied. The objective of this study was to investigate the impact of welding techniques on biological effect markers in exhaled breath condensate (EBC) of 58 healthy welders. The welding techniques applied were gas metal arc welding with solid wire (GMAW) (n=29) or flux cored wire (FCAW) (n=29). Welding fume particles were collected with personal samplers in the breathing zone inside the helmets. Levels of leukotriene B(4) (LTB(4)), prostaglandin E(2) (PGE(2)), and 8-isoprostane (8-iso-PGF(2α)) were measured with immunoassay kits and the EBC pH was measured after deaeration. Significantly higher 8-iso-PGF(2α) concentrations and a less acid pH were detected in EBC of welders using the FCAW than in EBC of welders using the GMAW technique. The lowest LTB(4) concentrations were measured in nonsmoking welders applying a solid wire. No significant influences were found in EBC concentrations of PGE(2) based upon smoking status or type of welding technique. This study suggests an enhanced irritative effect in the lower airways of mild steel welders due to the application of FCAW compared to GMAW, most likely associated with a higher emission of welding fumes.

33 CFR 334.50 - Piscataqua River at Portsmouth Naval Shipyard, Kittery, Maine; restricted areas.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Naval Shipyard, Kittery, Maine; restricted areas. 334.50 Section 334.50 Navigation and Navigable Waters... REGULATIONS § 334.50 Piscataqua River at Portsmouth Naval Shipyard, Kittery, Maine; restricted areas. (a) The..., except those vessels under the supervision of or contract to local military or naval authority, are...

33 CFR 334.50 - Piscataqua River at Portsmouth Naval Shipyard, Kittery, Maine; restricted areas.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Naval Shipyard, Kittery, Maine; restricted areas. 334.50 Section 334.50 Navigation and Navigable Waters... REGULATIONS § 334.50 Piscataqua River at Portsmouth Naval Shipyard, Kittery, Maine; restricted areas. (a) The..., except those vessels under the supervision of or contract to local military or naval authority, are...

33 CFR 334.50 - Piscataqua River at Portsmouth Naval Shipyard, Kittery, Maine; restricted areas.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Naval Shipyard, Kittery, Maine; restricted areas. 334.50 Section 334.50 Navigation and Navigable Waters... REGULATIONS § 334.50 Piscataqua River at Portsmouth Naval Shipyard, Kittery, Maine; restricted areas. (a) The..., except those vessels under the supervision of or contract to local military or naval authority, are...

Chromosome damage in lymphocytes of stainless steel welders related to past and current exposure to manual metal arc welding fumes.

PubMed

Jelmert, O; Hansteen, I L; Langård, S

1994-02-01

Cytogenetic damage was studied in lymphocytes from 42 welders using the manual metal arc (MMA) method on stainless steel (SS). A detailed characterization of previous exposure by job interviews, and for current exposure with personal air sampling and biological monitoring of chromium (Cr) and nickel (Ni) in blood and urine, was done for 32 of these welders. A subgroup of 20 welders was studied before and after 1-4 months of MMA/SS welding. A matched reference group I, and a larger reference group II were established for comparison. A significant increase in chromatid breaks (1.4 vs. 0.9 and 0.8 for group I and II) and for cells with aberrations (2.2 vs. 1.6 in group II) was found in the welders. An even larger difference was found when comparing non-smoking welders with their non-smoking referents. No synergistic effect between smoking and MMA/SS welding fumes was observed for any type of aberrations. Current welding fume exposure during the week before sampling was not associated with increases in any type of cytogenetic damage. The results indicated that the increase in chromatid breaks was associated with cumulated welding fume exposure for more than a year, and with not using respirators. Exposure to MMA/SS welding fumes for up to 4 months gave a slight, but significant increase in chromatid breaks when using the welders as their own referents. However, when using matched referents in the study after exposure, no difference was found between these welders and their matched referents. No differences between the groups were observed in the DNA synthesis and repair-inhibited cultures or for SCE.

Bootcamp Basics

ERIC Educational Resources Information Center

Jackson, Nancy Mann

2013-01-01

In the growing shipbuilding industry along the Gulf Coast, not only is it difficult to find skilled workers to fill open positions, but the problem is also compounded because various shipyards have different definitions of what a welder or shipfitter does. To combat the issue, the Alabama Technology Network (ATN)--the state's Manufacturing…

Employment as a welder and Parkinson disease among heavy equipment manufacturing workers.

PubMed

Marsh, Gary M; Gula, Mary Jean

2006-10-01

We investigated whether employment as a welder with potential exposure to manganese and other substances is associated with Parkinson disease (PD), parkinsonism or related neurological disorders, or accelerates the age of onset of PD. We selected cases and controls from 12,595 persons ever employed at three Caterpillar Inc. (CAT) plants between 1976 and 2004 with potential to make a medical insurance claim between 1998 and 2004. Cases had filed a claim for 1) PD, 2) "secondary parkinsonism", 3) "other degenerative diseases of the basal ganglia" or 4) "essential and other specific forms of tremor". Cases were grouped by claims: Group 1-claims 1 and 2 and Group 2-claims 1 to 4, and as study period incident (SPI) or prevalent. Each case was matched to two series of 10 controls each on date of case's first claim, year of birth, race and sex. Series I was also matched on plant. Odds ratios (OR) and 95% confidence intervals (CI) for the variable, "ever welder in any CAT plant" were: Group 1-SPI Cases: Series I (OR = .76, CI = .26-2.19), Series II (OR = .81, CI = .29-2.25); Group 1- Prevalent Cases: Series I (OR = .82, CI = .36-1.86), Series II (OR = .97, CI = .42-2.23); Group 2- SPI Cases: Series I (OR = 1.03, CI = .57-1.87), Series II (OR = 1.21, CI = .67-2.20) Group 2-Prevalent Cases: Series I (OR = 1.02, CI = .62-1.71), Series II (OR = .86, CI = .51-1.43). Our finding of no statistically significant associations for welding employment was maintained following adjustment for potential confounding and evaluation of possible effect modification. Employment as a welder did not accelerate the age of onset of PD. Our study supported the conclusion that employment as a welder is not associated with Parkinson disease, parkinsonism or a related neurological disorder.

Respiratory symptoms and lung function change in welders: are they associated with workplace exposures?

PubMed

Fishwick, David; Bradshaw, Lisa; Slater, Tania; Curran, Andrew; Pearce, Neil

2004-05-07

This study investigates whether work-related respiratory symptoms and acute falls in forced expiratory volume in 1 second (FEV1), previously observed in current welders, are related to measured workplace exposures to total fume and metals. At four work sites in New Zealand, changes in pulmonary function (and reported respiratory symptoms) were recorded in 49 welding workers (and 26 non-welders) exposed to welding fume. We also determined the personal breathing zone levels of total fume and various metals. Work-related respiratory symptoms were reported by 26.5% of welders and 11.5% of non-welders. These symptoms were related significantly to their personal breathing zone nickel exposure--with an adjusted odds ratio (OR) and 95% confidence interval [CI] of the high exposure group (compared to a low exposure group of 7.0 [1.3-36.6]). There were non-significant associations with total fume exposure (OR = 2.6, 95% CI 0.6-12.2), and exposure index of greater than 10 years (OR=2.8, 95% CI 0.5-15.0). A fall in FEV1 of at least 5% after 15 minutes of work was significantly associated with aluminium exposure (OR=5.8, 95% CI 1.7-20.6). Nickel exposure from metal inert gas (MIG) and tungsten inert gas (TIG) welding is associated with work-related respiratory symptoms and aluminium exposure from welding is associated with a fall in FEV1 of at least 5 % after 15 minutes of work.

Common Parts Catalog for Industry Shipyards

DTIC Science & Technology

2012-01-01

U.S. marine industry. *^^ DEFENSE STANDARDIZATION PROGRAM CASE STUDY Common Parts Catalog for Industry Shipyards BACKGROUND Tin* CPC is a...surface ships and submarines. A success story for submarines was documented in an earlier I >SP case study, Tfw Virginia Class Submarine Program ...be saved through focused and disciplined standardization.The accomplishments documented m The Virginia Class Submarine Program case study provided a

33 CFR 334.815 - Menominee River, at the Marinette Marine Corporation Shipyard, Marinette, Wisconsin; naval...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Marine Corporation Shipyard, Marinette, Wisconsin; naval restricted area. 334.815 Section 334.815... Shipyard, Marinette, Wisconsin; naval restricted area. (a) The area. The waters adjacent to Marinette... local military or Naval authority, vessels of the United States Coast Guard, and local or state law...

33 CFR 334.815 - Menominee River, at the Marinette Marine Corporation Shipyard, Marinette, Wisconsin; naval...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Marine Corporation Shipyard, Marinette, Wisconsin; naval restricted area. 334.815 Section 334.815... Shipyard, Marinette, Wisconsin; naval restricted area. (a) The area. The waters adjacent to Marinette... local military or Naval authority, vessels of the United States Coast Guard, and local or state law...

33 CFR 334.815 - Menominee River, at the Marinette Marine Corporation Shipyard, Marinette, Wisconsin; naval...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Marine Corporation Shipyard, Marinette, Wisconsin; naval restricted area. 334.815 Section 334.815... Shipyard, Marinette, Wisconsin; naval restricted area. (a) The area. The waters adjacent to Marinette... local military or Naval authority, vessels of the United States Coast Guard, and local or state law...

Survey of Programs Designed to Improve Employee Morale in Seven Major American Shipyards

DTIC Science & Technology

1992-07-01

Accident Program A combined union/management/ employee program whereby departmental committees work to design health and safety initiatives to attempt to...STANDARDS DING ENGINEERING ATION Survey of Programs Designed To Improve Employee Morale In Seven Major American Shipyards UNITED STATES NAVY David Taylor...4. TITLE AND SUBTITLE Survey of Programs Designed to Improve Employee Morale in Seven Major American Shipyards 5a. CONTRACT NUMBER 5b. GRANT

Nickel, vanadium, and lead as indicators of sediment contamination of marina, refinery, and shipyard areas.

PubMed

Pereira, Thayane Lúcia; Wallner-Kersanach, Mônica; Costa, Luiza Dy Fonseca; Costa, Daniel Pereira; Baisch, Paulo Roberto Martins

2018-01-01

Metallic elements found in the aquatic environment may originate in areas where petroleum is refined and vessels are maintained and repaired. This study aims to assess contamination caused by nickel (Ni), lead (Pb), and vanadium (V) in sediment of the Lagoa dos Patos estuary (RS, Brazil) and to evaluate them as indicators of areas under the influence of petroleum products and antifouling paints. Surface sediments were collected in summer and in winter in areas of marinas, shipyards, refinery, and a control station. High Pb and V concentrations in shipyards and at the Yacht Club showed that some organisms may be affected by toxicity. High Pb results of the index of geoaccumulation (Igeo) were found at the Yacht Club and shipyards. Al, Ni, and V had similar distribution in the sediment in both seasons. Ni and V had high relation in winter at the Yacht Club and at the Santos Shipyard, thus suggesting that these elements come mainly from petroleum products. The same happened to the relations between Pb and V, as well as Pb and Ni at the Santos Shipyard. These elements are employed as useful tools as indicators to identify places with moderate to high localized anthropogenic inputs of petroleum derivatives and antifouling paints.

Conversion of continuous-direct-current TIG welder to pulse-arc operation

NASA Technical Reports Server (NTRS)

Lien, D. R.

1969-01-01

Electronics package converts a continuous-dc tungsten-inert gas welder for pulse-arc operation. Package allows presetting of the pulse rate, duty cycle, and current value, and enables welding of various alloys and thicknesses of materials.

[Respiratory function evaluation in welders taking into account tecnological evolution of individual protection dispositive and risk specific information].

PubMed

Boggia, B; Graziuso, G; Carbone, U

2011-01-01

Aim of the study is to evaluate the effect of specific information program on DPI use on the functional respiratory parameters in a group of 15 welders compared with 18 welders not included in the program and 18 workers of industrial sector. Spirometryc parameters were recorded and compared and the results pointed out a significant increase of FEV1 and FVC in the study group compared with welder out of the study while no difference were observed between study group and workers of industrial sector. Results shown that the correct use of DPI could reduce the effects of welding fumes on respiratory tract making these effects equal to the exposure to industrial dusts.

The National Shipbuilding Research Program. Environmental Training Modules. Module 2 Shipyard Craft Specific Training

DTIC Science & Technology

1999-05-01

environmental liability. 4) Insecticides and Hazardous Metals Many antifouling coatings contain insecticides such as Tributyltin ( TBT ), and...of potentially toxic substances from shipyard welding operations. ASBESTOS OPERATIONS IN THE SHIPYARD (10ASBTOS.DOC) OBJECTIVE To ensure that...distillation operations. COOLING TOWERS (6-COOLIN.DOC) OBJECTIVE To minimize the potential for toxic emissions from cooling towers. VARNISH DIP TANKS (7

Specification for Qualification and Certification for Level II - Advanced Welders.

ERIC Educational Resources Information Center

American Welding Society, Miami, FL.

This document defines the requirements and program for the American Welding Society (AWS) to certify advanced-level welders through an evaluation process entailing performance qualification and practical knowledge tests requiring the use of advanced reading, computational, and manual skills. The following items are included: statement of the…

Increased metal concentrations in exhaled breath condensate of industrial welders.

PubMed

Hoffmeyer, Frank; Weiss, Tobias; Lehnert, Martin; Pesch, Beate; Berresheim, Hans; Henry, Jana; Raulf-Heimsoth, Monika; Broding, Horst Christoph; Bünger, Jürgen; Harth, Volker; Brüning, Thomas

2011-01-01

It was the aim of this study to evaluate the effect of different devices on the metal concentration in exhaled breath condensate (EBC) and to prove whether working conditions in different welding companies result in diverse composition of metallic elements. The influence of two collection devices (ECoScreen, ECoScreen2) on detection of metallic elements in EBC was evaluated in 24 control subjects. Properties of ECoScreen and a frequent use can alter EBC metal content due to contamination from metallic components. ECoScreen2 turned out to be favourable for metal assessment. Concentrations of iron, nickel and chromium in EBC sampled with ECoScreen2 were compared between non-exposed controls and industrial welders. Metal concentrations in EBC were higher in 36 welders recruited from three companies. Exposure to welding fumes could be demonstrated predominantly for increased iron concentrations. Concentrations of iron and nickel differed by working conditions, but chromium could not be detected in EBC.

33 CFR 334.45 - Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Shipyard, naval restricted area, Bath, Maine. 334.45 Section 334.45 Navigation and Navigable Waters CORPS... REGULATIONS § 334.45 Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine. (a) The... and other craft, except those vessels under the supervision or contract to local military or Naval...

33 CFR 334.45 - Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Shipyard, naval restricted area, Bath, Maine. 334.45 Section 334.45 Navigation and Navigable Waters CORPS... REGULATIONS § 334.45 Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine. (a) The... and other craft, except those vessels under the supervision or contract to local military or Naval...

33 CFR 334.45 - Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Shipyard, naval restricted area, Bath, Maine. 334.45 Section 334.45 Navigation and Navigable Waters CORPS... REGULATIONS § 334.45 Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine. (a) The... and other craft, except those vessels under the supervision or contract to local military or Naval...

33 CFR 334.45 - Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Shipyard, naval restricted area, Bath, Maine. 334.45 Section 334.45 Navigation and Navigable Waters CORPS... REGULATIONS § 334.45 Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine. (a) The... and other craft, except those vessels under the supervision or contract to local military or Naval...

33 CFR 334.45 - Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Shipyard, naval restricted area, Bath, Maine. 334.45 Section 334.45 Navigation and Navigable Waters CORPS... REGULATIONS § 334.45 Kennebec River, Bath Iron Works Shipyard, naval restricted area, Bath, Maine. (a) The... and other craft, except those vessels under the supervision or contract to local military or Naval...

Specification for Qualification and Certification for Level III - Expert Welders.

ERIC Educational Resources Information Center

American Welding Society, Miami, FL.

This document defines the requirements and program for the American Welding Society to certify expert welders through an evaluation process entailing performance qualification and practical knowledge tests requiring the use of advanced reading, computational, and manual skills. The following items are included: statement of the standard's scope;…

Body burden of aluminum in relation to central nervous system function among metal inert-gas welders.

PubMed

Riihimäki, V; Hänninen, H; Akila, R; Kovala, T; Kuosma, E; Paakkulainen, H; Valkonen, S; Engström, B

2000-04-01

The relationship between elevated internal aluminum loads and central nervous system function was studied among aluminum welders, and the threshold level for adverse effect was defined. For 65 aluminum welders and 25 current mild steel welders body burden was estimated, and the aluminum concentrations in serum (S-Al) and urine (U-Al) were analyzed with graphite furnace atomic absorption spectrometry with Zeeman background correction. Referents and low-exposure and high-exposure groups were defined according to an aggregated measure of aluminum body burden, the group median S-Al levels being 0.08, 0.14, and 0.46 micromol/l, respectively, and the corresponding values for U-Al being 0.4, 1.8, and 7.1 micromol/l. Central nervous system functions were assessed with a neuropsychological test battery, symptom and mood questionnaires, a visual and quantitative analysis of electroencephalography (EEG), and P3 event-related potentials with pitch and duration paradigms. Subjective symptoms showed exposure-related increases in fatigue, mild depression, and memory and concentration problems. Neuropsychological testing revealed a circumscribed effect of aluminum, mainly in tasks demanding complex attention and the processing of information in the working memory system and in the analysis and recall of abstract visual patterns. The visual EEG analysis revealed pathological findings only for aluminum welders. Mild, diffuse abnormalities were found in 17% of the low-exposure group and 27% of the high-exposure group, and mild to moderate epileptiform abnormalities at a frequency of 7% and 17%, respectively. Both objective neurophysiological and neuropsychological measures and subjective symptomatology indicated mild but unequivocal findings dose-dependently associated with increased aluminum body burden. The study indicates that the body burden threshold for adverse effect approximates an U-Al value of 4-6 micromol/l and an S-Al value of 0.25-0.35 micromol/l among aluminum welders.

77 FR 72411 - The Standard on Personal Protective Equipment (PPE) for Shipyard Employment; Extension of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-05

... Standard on Personal Protective Equipment (PPE) for Shipyard Employment; Extension of the Office of... requirements specified in the Standard on Personal Protective Equipment (PPE) for Shipyard Employment (29 CFR... information collection requirements contained in the Standard on Personal Protective Equipment (PPE) for...

Prevalence and association of welding related systemic and respiratory symptoms in welders

PubMed Central

El-Zein, M; Malo, J; Infante-Rivard, C; Gautrin, D

2003-01-01

Background: The prevalence of welding related respiratory symptoms coexisting with welding related systemic symptoms in welders is unknown. Aims: To determine in a sample of welders the prevalence of coexisting welding related systemic symptoms indicative of metal fume fever (MFF) and welding related respiratory symptoms suggestive of occupational asthma (OA), and the strength and significance of any association between these two groups of symptoms. Methods: A respiratory symptoms questionnaire, a systemic symptoms questionnaire, and a questionnaire on occupational history were administered by telephone to 351 of a sample of 441 welders (79.6%) from two cities in Québec, Canada. Results: The co-occurrence of possible MFF (defined as having at least two symptoms of fever, feelings of flu, general malaise, chills, dry cough, metallic taste, and shortness of breath, occurring at the beginning of the working week, 3–10 hours after exposure to welding fumes) together with welding related respiratory symptoms suggestive of OA (defined as having at least two welding related symptoms of cough, wheezing, and chest tightness) was 5.8%. These two groups of symptoms were significantly associated (χ2 = 18.9, p < 0.001). Conclusion: There is a strong association between welding related MFF and welding related respiratory symptoms suggestive of OA. As such, MFF could be viewed as a pre-marker of welding related OA, a hypothesis that requires further investigation. PMID:12937186

76 FR 44265 - General Working Conditions in Shipyard Employment; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-25

... Employment; Correction AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Final... on General Working Conditions in Shipyard Employment published in the Federal Register of May 2, 2011...

The ordinary work environment increases symptoms from eyes and airways in mild steel welders.

PubMed

Jönsson, Lena S; Tinnerberg, Håkan; Jacobsson, Helene; Andersson, Ulla; Axmon, Anna; Nielsen, Jørn

2015-11-01

We aimed to follow diary-registered symptoms from eyes and airways in mild steel welders and relate them to different exposure measures. Furthermore, we would clarify the influence of possible effect modifiers. Non-smoking welders with (N = 74) and without (N = 32) work-related symptoms the last month were enroled. Symptoms and work tasks each day for three two-week periods during 1 year were obtained. Respirable dust (RD) was measured 1 day each period for each worker. The personal daily exposure was assessed as: (1) days at work, (2) welding time and (3) estimates of RD from welding and grinding, calculated from diary entries and measurements. Only 9.2 % of the particle measurements exceed the Swedish occupational exposure limit (OEL; 5 mg/m(3)). Days at work increased the risk of symptoms studied: eyes: 1.79 (1.46-2.19), nasal: 2.16 (1.81-2.58), dry cough: 1.50 (1.23-1.82) and wheezing and/or dyspnoea: 1.27 (1.03-1.56; odds ratio, 95 % confidence interval). No clear dose-response relationships were found for the other exposure estimates. Eye symptoms increased by number of years welding. Nasal symptoms and dry cough increased having forced expiratory volume in first second below median at baseline. Wheezing and/or dyspnoea increased in winter, by number of years welding, having a negative standard skin-prick test and having a vital capacity above median at baseline. The current Swedish OEL may not protect welders against eye and airway symptoms. The results add to the evidence that welders should be offered regular medical surveillance from early in the career.

Plasma homocysteine is associated with increased oxidative stress and antioxidant enzyme activity in welders.

PubMed

Liu, Hung-Hsin; Shih, Tung-Sheng; Huang, Hsin-Ru; Huang, Shih-Chien; Lee, Lien-Hsiung; Huang, Yi-Chia

2013-01-01

The purpose of this study was to examine the association of vitamin B6 status and plasma homocysteine with oxidative stress and antioxidant capacities in welders. Workers were divided into either the welding exposure group (n = 57) or the nonexposure controls (n = 42) based on whether they were employed as welders. There were no significant differences in vitamin B₆ status and plasma homocysteine concentration between the welding exposure group and the nonexposure controls. The welding exposure group had significantly higher levels of oxidized low-density lipoprotein cholesterol and lower erythrocyte glutathione concentration and superoxide dismutase (SOD) activities when compared to nonexposure controls. Plasma pyridoxal 5'-phosphate concentration did not correlate with oxidative stress indicators or antioxidant capacities in either group. However, plasma homocysteine significantly correlated with total antioxidant capacity (TAC) (partial r(s) = -0.34, P < 0.05) and erythrocyte SOD activities (partial r(s) = 0.29, P < 0.05) after adjusting for potential confounders in the welding exposure group. In the welding exposure group, adequate vitamin B₆ status was not associated with oxidative stress or antioxidant capacities. However, elevated plasma homocysteine seemed to be a major contributing factor to antioxidant capacities (TAC and erythrocyte SOD activities) in welders.

Exposure to respirable dust and manganese and prevalence of airways symptoms, among Swedish mild steel welders in the manufacturing industry.

PubMed

Hedmer, Maria; Karlsson, Jan-Eric; Andersson, Ulla; Jacobsson, Helene; Nielsen, Jörn; Tinnerberg, Håkan

2014-08-01

Welding fume consists of metal fumes, e.g., manganese (Mn) and gases, e.g., ozone. Particles in the respirable dust (RD) size range dominate. Exposure to welding fume could cause short- and long-term respiratory effects. The prevalence of work-related symptoms among mild steel welders was studied, and the occupational exposure to welding fumes was quantified by repeated measurements of RD, respirable Mn, and ozone. Also the variance components were studied. A questionnaire concerning airway symptoms and occupational history was answered by 79% of a cohort of 484 welders. A group of welders (N = 108) were selected and surveyed by personal exposure measurements of RD and ozone three times during 1 year. The welders had a high frequency of work-related symptoms, e.g., stuffy nose (33%), ocular symptoms (28%), and dry cough (24%). The geometric mean exposure to RD and respirable Mn was 1.3 mg/m(3) (min-max 0.1-38.3 mg/m(3)) and 0.08 mg/m(3) (min-max <0.01-2.13 mg/m(3)), respectively. More than 50% of the Mn concentrations exceeded the Swedish occupational exposure limit (OEL). Mainly, low concentrations of ozone were measured, but 2% of the samples exceeded the OEL. Of the total variance for RD, 30 and 33% can be attributed to within-worker variability and between-company variability, respectively. Welders had a high prevalence of work-related symptom from the airways and eyes. The welders' exposure to Mn was unacceptably high. To reduce the exposure further, control measures in the welding workshops are needed. Correct use of general mechanical ventilation and local exhaust ventilation can, for example, efficiently reduce the exposure.

Welder: Apprenticeship Course Outline. Apprenticeship and Industry Training. 1207.1

ERIC Educational Resources Information Center

Alberta Advanced Education and Technology, 2007

2007-01-01

The graduate of the Welder apprenticeship program is a certified journeyperson who will be able to: (1) be skillful in the fusing of metals using prescribed welding applications; (2) have a working knowledge of the welding equipment involved with the various welding procedures; (3) comprehend drawings and develop layout patterns for projects and…

Manganese exposure: neuropsychological and neurological symptoms and effects in welders.

PubMed

Bowler, Rosemarie M; Gysens, Sabine; Diamond, Emily; Nakagawa, Sanae; Drezgic, Marija; Roels, Harry A

2006-05-01

Manganese exposure reportedly may have an adverse effect on CNS function and mood. Sixty-two welders with clinical histories of exposure to manganese were compared to 46 matched regional controls chosen at random from a telephone directory. The following tests were given: Wechsler Adult Intelligence Scale (WAIS-III), Wechsler Memory Scale (WMS-III), Boston Naming, WRAT-3, Cancellation H, Trail Making Tests A and B, Auditory Consonant Trigrams, Stroop, Rey-Osterreith, Animal Naming, Controlled Oral Word Association (COWAT), Test of Memory Malingering, Rey 15-item, Fingertapping, Grooved Pegboard, Dynamometer, Visual Attention Test, Lanthony d-15 Color Vision, Vistech Contrast Sensitivity, and Schirmer strips. The controls were administered a shorter battery of tests and the Rey-Osterreith, Animal Naming and some of the subtests of the WAIS-III, WMS-III were not administered. Mood tests, given to both groups, included the Symptom Checklist-40, Symptom Checklist-90-R, Profile of Mood Scale, Beck Depression Inventory II, and Beck Anxiety Inventory. Forty-seven welders and 42 controls were retained for statistical analysis after appropriate exclusions. Results showed a high rate of symptom prevalence and pronounced deficits in motor skills, visuomotor tracking speed and information processing, working memory, verbal skills (COWAT), delayed memory, and visuospatial skills. Neurological examinations compared to neuropsychological test results suggest that neuropsychologists obtain significantly more mood symptoms overall. Odds ratios indicate highly elevated risk for neuropsychological and neurological symptomatology of manganism. Mood disturbances including anxiety, depression, confusion, and impaired vision showed very high odds ratios. Neurological exams and neuropsychological tests exhibit complementarity and differences, though neuropsychological methods may be more sensitive in detecting early signs of manganism. The present study corroborates the findings of our

33 CFR 334.1160 - San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false San Pablo Bay, Calif.; target... REGULATIONS § 334.1160 San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo. (a..., Mare Island Naval Shipyard, Vallejo, California, will conduct target practice in the area at intervals...

33 CFR 334.1160 - San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false San Pablo Bay, Calif.; target... REGULATIONS § 334.1160 San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo. (a..., Mare Island Naval Shipyard, Vallejo, California, will conduct target practice in the area at intervals...

33 CFR 334.1160 - San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo.

Code of Federal Regulations, 2012 CFR

2012-07-01

... practice area, Mare Island Naval Shipyard, Vallejo. 334.1160 Section 334.1160 Navigation and Navigable... REGULATIONS § 334.1160 San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo. (a) The danger zone. A sector in San Pablo Bay adjacent to the westerly shore of Mare Island with a radius...

33 CFR 334.1160 - San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo.

Code of Federal Regulations, 2013 CFR

2013-07-01

... practice area, Mare Island Naval Shipyard, Vallejo. 334.1160 Section 334.1160 Navigation and Navigable... REGULATIONS § 334.1160 San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo. (a) The danger zone. A sector in San Pablo Bay adjacent to the westerly shore of Mare Island with a radius...

33 CFR 334.1160 - San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo.

Code of Federal Regulations, 2014 CFR

2014-07-01

... practice area, Mare Island Naval Shipyard, Vallejo. 334.1160 Section 334.1160 Navigation and Navigable... REGULATIONS § 334.1160 San Pablo Bay, Calif.; target practice area, Mare Island Naval Shipyard, Vallejo. (a) The danger zone. A sector in San Pablo Bay adjacent to the westerly shore of Mare Island with a radius...

Policy Decisions for Strategic Shipyard Survival

DTIC Science & Technology

1992-12-01

a shipyard mobilization base should: 1. Ensure that ships of the Naval fleet can be maintained in a high degree of material readiness and...capability to build combatants and cargo ship to wartime requirements and to support the goal of a merchant marine that is suitable in time of war or...guarantees, cargo reservation, the tax treatment of a ship operator’s construction reserve fund, and the Shipbuilding Trade Act of 1992. It will be shown

75 FR 1832 - Assistance to Small Shipyards Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-13

... AGENCY: Maritime Administration, Department of Transportation, Office of Shipyards and Marine Technology...,000 appropriated for the program is reserved for program administration.) Such grants may not be used... production employees. The Maritime Administration will seek to obtain the maximum benefit from the available...

Plasma Homocysteine Is Associated with Increased Oxidative Stress and Antioxidant Enzyme Activity in Welders

PubMed Central

Liu, Hung-Hsin; Shih, Tung-Sheng; Huang, Hsin-Ru; Huang, Shih-Chien; Lee, Lien-Hsiung; Huang, Yi-Chia

2013-01-01

The purpose of this study was to examine the association of vitamin B6 status and plasma homocysteine with oxidative stress and antioxidant capacities in welders. Workers were divided into either the welding exposure group (n = 57) or the nonexposure controls (n = 42) based on whether they were employed as welders. There were no significant differences in vitamin B6 status and plasma homocysteine concentration between the welding exposure group and the nonexposure controls. The welding exposure group had significantly higher levels of oxidized low-density lipoprotein cholesterol and lower erythrocyte glutathione concentration and superoxide dismutase (SOD) activities when compared to nonexposure controls. Plasma pyridoxal 5′-phosphate concentration did not correlate with oxidative stress indicators or antioxidant capacities in either group. However, plasma homocysteine significantly correlated with total antioxidant capacity (TAC) (partial r s = −0.34, P < 0.05) and erythrocyte SOD activities (partial r s = 0.29, P < 0.05) after adjusting for potential confounders in the welding exposure group. In the welding exposure group, adequate vitamin B6 status was not associated with oxidative stress or antioxidant capacities. However, elevated plasma homocysteine seemed to be a major contributing factor to antioxidant capacities (TAC and erythrocyte SOD activities) in welders. PMID:24106453

Annual Report: 2010-2011 Storm Season Sampling For NON-DRY DOCK STORMWATER MONITORING FOR PUGET SOUND NAVAL SHIPYARD, BREMERTON, WA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brandenberger, Jill M.; Metallo, David; Johnston, Robert K.

2012-09-01

This interim report summarizes the stormwater monitoring conducted for non-dry dock outfalls in both the confined industrial area and the residential areas of Naval Base Kitsap within the Puget Sound Naval Shipyard (referred to as the Shipyard). This includes the collection, analyses, and descriptive statistics for stormwater sampling conducted from November 2010 through April 2011. Seven stormwater basins within the Shipyard were sampled during at least three storm events to characterize non-dry dock stormwater discharges at selected stormwater drains located within the facility. This serves as the Phase I component of the project and Phase II is planned for themore » 2011-2012 storm season. These data will assist the Navy, USEPA, Ecology and other stakeholders in understanding the nature and condition of stormwater discharges from the Shipyard and inform the permitting process for new outfall discharges. The data from Phase I was compiled with current stormwater data available from the Shipyard, Sinclair/Dyes Inlet watershed, and Puget Sound in order to support technical investigations for the Draft NPDES permit. The permit would require storm event sampling at selected stormwater drains located within the Shipyard. However, the data must be considered on multiple scales to truly understand potential impairments to beneficial uses within Sinclair and Dyes Inlets.« less

33 CFR 165.504 - Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va. 165.504 Section 165.504 Navigation and Navigable... Coast Guard District § 165.504 Newport News Shipbuilding and Dry Dock Company Shipyard, James River...

33 CFR 165.504 - Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va. 165.504 Section 165.504 Navigation and Navigable... Coast Guard District § 165.504 Newport News Shipbuilding and Dry Dock Company Shipyard, James River...

33 CFR 165.504 - Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va. 165.504 Section 165.504 Navigation and Navigable... Coast Guard District § 165.504 Newport News Shipbuilding and Dry Dock Company Shipyard, James River...

33 CFR 165.504 - Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va. 165.504 Section 165.504 Navigation and Navigable... Coast Guard District § 165.504 Newport News Shipbuilding and Dry Dock Company Shipyard, James River...

33 CFR 165.504 - Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Newport News Shipbuilding and Dry Dock Company Shipyard, James River, Newport News, Va. 165.504 Section 165.504 Navigation and Navigable... Coast Guard District § 165.504 Newport News Shipbuilding and Dry Dock Company Shipyard, James River...

Biological effect markers in exhaled breath condensate and biomonitoring in welders: impact of smoking and protection equipment.

PubMed

Gube, Monika; Ebel, Joachim; Brand, Peter; Göen, Thomas; Holzinger, Karl; Reisgen, Uwe; Kraus, Thomas

2010-10-01

The objective of this study was to investigate the effect of welding as well as the impact of smoking and protection measures on biological effect markers in exhaled breath condensate. Additionally, biomonitoring of chromium, aluminium and nickel in urine was performed to quantify internal exposure. Exhaled breath condensate (EBC) and urine samples of 45 male welders and 24 male non-exposed control subjects were collected on Friday pre-shift and after 8 h of work post-shift. In EBC, biological effect markers such as malondialdehyde, nitrite, nitrate, 3-nitrotyrosine, tyrosine, hydroxyproline, proline, H(2)O(2) and pH-value were measured while aluminium, nickel, and chromium were measured in the urine samples. Although internal exposure to aluminium, nickel and chromium in this study was low, welders showed significantly increased concentrations of all these parameters at baseline compared to non-exposed controls. Moreover, welders had higher nitrate concentrations in EBC at baseline and after shift. Nitrate concentration was considerably lower after shift if personal protection equipment was used. H(2)O(2) was increased only when subjects smoked during shift. It has been shown that welding-associated long-term and short-term health effects could be detected in a population of welders. The results also showed that using personal protection equipment is of high importance and H(2)O(2) may be an effect marker associated with smoking rather than with welding fumes, while nitrate in EBC seems to be sensitive to welding fume exposure.

Radiation exposure assessment for portsmouth naval shipyard health studies.

PubMed

Daniels, R D; Taulbee, T D; Chen, P

2004-01-01

Occupational radiation exposures of 13,475 civilian nuclear shipyard workers were investigated as part of a retrospective mortality study. Estimates of annual, cumulative and collective doses were tabulated for future dose-response analysis. Record sets were assembled and amended through range checks, examination of distributions and inspection. Methods were developed to adjust for administrative overestimates and dose from previous employment. Uncertainties from doses below the recording threshold were estimated. Low-dose protracted radiation exposures from submarine overhaul and repair predominated. Cumulative doses are best approximated by a hybrid log-normal distribution with arithmetic mean and median values of 20.59 and 3.24 mSv, respectively. The distribution is highly skewed with more than half the workers having cumulative doses <10 mSv and >95% having doses <100 mSv. The maximum cumulative dose is estimated at 649.39 mSv from 15 person-years of exposure. The collective dose was 277.42 person-Sv with 96.8% attributed to employment at Portsmouth Naval Shipyard.

Cancer incidence among welders: possible effects of exposure to extremely low frequency electromagnetic radiation (ELF) and to welding fumes.

PubMed Central

Stern, R M

1987-01-01

Epidemiological studies of cancer incidence among welders disclose a pooled total of 146 cases of leukemia observed versus 159.46 expected, a risk ratio of 0.92, and 40 cases of acute leukemia observed versus 43.39 expected, a risk ratio of 0.92. For respiratory tract cancer, the pooled total is 1789 cases observed versus 1290.7 expected, a risk ratio of 1.39. Most electric welders are exposed to extremely low frequency electromagnetic radiation (ELF) (magnetic flux densities of up to 100,000 microT), a suspected leukemogen, and to concentrated metallic aerosols (up to 200 mg/m3), which can contain the putative respiratory tract carcinogens Cr(VI) and Ni. The two exposures are usually coincident, since welding with an electric current produces welding fumes. The observation of an excess risk for respiratory tract cancer strongly suggests significant exposure both to fumes and to ELF. The absence of increased risk for all leukemia or for acute leukemia among ELF-exposed welders does not support the hypothesis that the observed excess risk for leukemia or acute leukemia among workers in the electrical trades is due to their ELF exposure, which on the average is lower than that of welders. PMID:3447902

Monitoring of chromium and nickel in biological fluids of stainless steel welders using the flux-cored-wire (FCW) welding method.

PubMed

Stridsklev, Inger Cecilie; Schaller, Karl-Heinz; Langård, Sverre

2004-11-01

This study was undertaken to investigate the exposure to chromium (Cr) and nickel (Ni) in flux-cored wire (FCW) welders welding on stainless steel (SS). Seven FCW welders were monitored for 3 days to 1 workweek, measuring Cr and Ni in air, blood, and urine. The welders were questioned about exposure to Cr and Ni during their whole working careers, with emphasis on the week of monitoring, about the use of personal protective equipment and their smoking habits. The air concentrations were mean 200 microg/m(3) (range 2.4-2,744) for total Cr, 11.3 microg/m(3) (<0.2-151.3) for Cr(VI), and 50.4 microg/m(3) (<2.0-416.7) for Ni during the workdays for the five welders who were monitored with air measurements. The levels of Cr and Ni in biological fluids varied between different workplaces. For Cr in whole blood, plasma, and erythrocytes, the mean levels after work were 1.25 (<0.4-8.3) and 1.68 (<0.2-8.0) and 0.9 (<0.4-7.2) microg/l, respectively. For Ni most of the measurements in whole blood and plasma were below the detection limits, the mean levels after work being 0.84 (<0.8-3.3) and 0.57 microg/l (<0.4-1.7), respectively. Mean levels for Cr and Ni in the urine after work were 3.96 (0.34-40.7) and 2.50 (0.56-5.0) microg/g creatinine, respectively. Correlations between the Cr(VI) levels measured in air and the levels of total Cr in the measured biological fluids were found. The results seem to support the view that monitoring of Cr in the urine may be versatile for indirect monitoring of the Cr(VI) air level in FCW welders. The results seem to suggest that external and internal exposure to Cr and Ni in FCW welders welding SS is low in general.

Redemption of asthma pharmaceuticals among stainless steel and mild steel welders: a nationwide follow-up study.

PubMed

Kristiansen, Pernille; Jørgensen, Kristian Tore; Hansen, Johnni; Bonde, Jens Peter

2015-08-01

The purpose was to examine bronchial asthma according to cumulative exposure to fume particulates conferred by stainless steel and mild steel welding through a proxy of redeemed prescribed asthma pharmaceuticals. A Danish national company-based historical cohort of 5,303 male ever-welders was followed from 1995 to 2011 in the Danish Medicinal Product Registry to identify the first-time redemption of asthma pharmaceuticals including beta-2-adrenoreceptor agonists, adrenergic drugs for obstructive airway diseases and inhalable glucocorticoids. Lifetime exposure to welding fume particulates was estimated by combining questionnaire data on welding work with a welding exposure matrix. The estimated exposure accounted for calendar time, welding intermittence, type of steel, welding methods, local exhaustion and welding in confined spaces. Hazard ratios (HRs) with 95% confidence intervals (CIs) were calculated using a Cox proportional hazards model adjusting for potential confounders and taking modifying effects of smoking into account. The average incidence of redemption of asthma pharmaceuticals in the cohort was 16 per 1,000 person year (95% CI 10-23 per 1,000 person year). A moderate nonsignificant increased rate of redemption of asthma medicine was observed among high-level exposed stainless steel welders in comparison with low-level exposed welders (HR 1.54, 95% CI 0.76-3.13). This risk increase was driven by an increase risk among non-smoking stainless steel welders (HR 1.46, 95% CI 1.06-2.02). Mild steel welding was not associated with increased risk of use asthma pharmaceuticals. The present study indicates that long-term exposure to stainless steel welding is related to increased risk of asthma in non-smokers.

Air exposure assessment and biological monitoring of manganese and other major welding fume components in welders.

PubMed

Ellingsen, Dag G; Dubeikovskaya, Larisa; Dahl, Kari; Chashchin, Maxim; Chashchin, Valery; Zibarev, Evgeny; Thomassen, Yngvar

2006-10-01

In a cross-sectional study, 96 welders were compared with 96 control subjects. Also 27 former welders, all diagnosed as having manganism, were examined. Exposure to welding fumes was determined in the 96 welders, while the concentration of elements in whole blood and urine was determined in all subjects. The geometric mean (GM) concentrations of manganese (Mn) and iron in the workroom air were 97 microg m(-3) (range 3-4620 microg m(-3); n=188) and 894 microg m(-3) (range 106-20 300 microg m(-3); n=188), respectively. Thus the Mn concentration in the workroom air was on average 10.6% (GM) of that of the Fe concentration. No substantial difference was observed in the air Mn concentrations when welding mild steel as compared to welding stainless steel. The arithmetic mean (AM) concentration of Mn in whole blood (B-Mn) was about 25% higher in the welders compared to the controls (8.6 vs. 6.9 microg l(-1); p < 0.001), while the difference in the urinary Mn concentrations did not attain statistical significance. A Pearson's correlation coefficient of 0.31 (p < 0.01) was calculated between B-Mn and Mn in the workroom air that was collected the day before blood sampling. Although the exposure to welding fumes in the patients had ceased on average 5.8 years prior to the study (range 4 years-7 years), their AM B-Mn concentration was still higher than in referents of similar age (8.7 microg l(-1) vs. 7.0 microg l(-1)). However, their urinary concentrations of cobolt, iron and Mn were all statistically significantly lower.

Dose-effect relationships between manganese exposure and neurological, neuropsychological and pulmonary function in confined space bridge welders.

PubMed

Bowler, Rosemarie M; Roels, Harry A; Nakagawa, Sanae; Drezgic, Marija; Diamond, Emily; Park, Robert; Koller, William; Bowler, Russell P; Mergler, Donna; Bouchard, Maryse; Smith, Donald; Gwiazda, Roberto; Doty, Richard L

2007-03-01

Although adverse neuropsychological and neurological health effects are well known among workers with high manganese (Mn) exposures in mining, ore-processing and ferroalloy production, the risks among welders with lower exposures are less well understood. Confined space welding in construction of a new span of the San Francisco-Oakland Bay Bridge without adequate protection was studied using a multidisciplinary method to identify the dose-effect relationship between adverse health effects and Mn in air or whole blood. Bridge welders (n = 43) with little or no personal protection equipment and exposed to a welding fume containing Mn, were administered neurological, neuropsychological, neurophysiological and pulmonary tests. Outcome variables were analysed in relation to whole blood Mn (MnB) and a Cumulative Exposure Index (CEI) based on Mn-air, duration and type of welding. Welders performed a mean of 16.5 months of welding on the bridge, were on average 43.8 years of age and had on average 12.6 years of education. The mean time weighted average of Mn-air ranged from 0.11-0.46 mg/m(3) (55% >0.20 mg/m(3)). MnB >10 microg/l was found in 43% of the workers, but the concentrations of Mn in urine, lead in blood and copper and iron in plasma were normal. Forced expiratory volume at 1s: forced vital capacity ratios (FEV(1)/FVC) were found to be abnormal in 33.3% of the welders after about 1.5 years of welding at the bridge. Mean scores of bradykinesia and Unified Parkinson Disease Rating Scale exceeded 4 and 6, respectively. Computer assisted tremor analysis system hand tremor and body sway tests, and University of Pennsylvania Smell Identification Test showed impairment in 38.5/61.5, 51.4 and 88% of the welders, respectively. Significant inverse dose-effect relationships with CEI and/or MnB were found for IQ (p

Risk Perception and Risk Communication for Training Women Apprentice Welders: A Challenge for Public Health Nursing

PubMed Central

Bonow, Clarice Alves; Cezar-Vaz, Marta Regina; de Almeida, Marlise Capa Verde; Rocha, Laurelize Pereira; Borges, Anelise Miritz; Piexak, Diéssica Roggia; Vaz, Joana Cezar

2013-01-01

This research has aimed to identify the perceptions of women apprentice welders about physical, chemical, biological, and physiological risk factors to which they are exposed and evaluate the identification of health disorders self-reported for women apprentice welders before and after implementation of a nursing socioenvironmental intervention. A quantitative study was performed with 27 women apprentice welders (first phase) and before and after an intervention with 18 women (second phase) in Southern Brazil in 2011. The data were analysed using SPSS 19.0. The participants identified the following risk types: physical (96.2%), chemical (96.2%), physiological (88.8%), and biological (62.9%). The results show a significant difference of the pre- and posttest averages for the musculoskeletal system and a posttest average increase for the integumentary, respiratory, and auditory system. A correlation of the women apprentices' ages and the identification of health disorders were made. It was understood that the perception of women apprentices regarding a particular set of occupational risks is essential for public health nursing to develop an effective risk communication as a positive tool for teaching and learning. PMID:24288604

Analysis of inflammatory markers and metals in nasal lavage fluid of welders.

PubMed

Raulf, Monika; Weiss, Tobias; Lotz, Anne; Lehnert, Martin; Hoffmeyer, Frank; Liebers, Verena; Van Gelder, Rainer; Udo Käfferlein, Heiko; Hartwig, Andrea; Pesch, Beate; Brüning, Thomas

2016-01-01

Welding fumes may produce adverse health effects in the respiratory tract. To assess the relationship between exposure to welding fumes and inflammation in the upper airways, 190 male welders were examined from the WELDOX study (median age 40 yr, 54.7% smokers, and 32.9% atopics). Inhalable welding fumes were collected in the breathing zone of welders during a single shift. Chromium (Cr), nickel (Ni), manganese (Mn), and iron (Fe) were measured in the welding-fume samples and in postshift nasal lavage fluid (NALF). In addition, the numbers of particles and inflammatory biomarkers, including total and differential cell counts, interleukin (IL)-8, leukotriene (LT) B 4 , 8-isoprostane (8-iso-PGF 2α ), tissue inhibitor of metalloproteinase-1 (TIMP-1), and immunoreactive matrix metalloproteinase (MMP)-9, were determined. Metal concentrations in NALF correlated with airborne concentrations. No significant association was found between airborne metal concentrations and biomarkers of inflammation in NALF, whereas increasing metal concentrations in NALF resulted in increased concentrations of total protein, IL-8, MMP-9, and TIMP-1. LTB 4 and 8-iso PGF 2α were elevated at higher concentrations of Cr or Ni in NALF. The same was true for Fe, although the effects were less pronounced and of borderline significance. In conclusion, our results showed a significant association between the concentrations of metals and soluble inflammatory markers in the NALF of welders. The noninvasive collection of NALF is applicable in field studies, where it may serve as a suitable matrix to simultaneously assess biomarkers of exposure and effect in the upper respiratory tract in workers who are occupationally exposed to airborne hazardous substances.

Editor's Highlight: Lower Fractional Anisotropy in the Globus Pallidus of Asymptomatic Welders, a Marker for Long-Term Welding Exposure.

PubMed

Lee, Eun-Young; Flynn, Michael R; Du, Guangwei; Lewis, Mechelle M; Herring, Amy H; Van Buren, Eric; Van Buren, Scott; Kong, Lan; Mailman, Richard B; Huang, Xuemei

2016-09-01

Welding fumes contain several metals including manganese (Mn), iron (Fe), and copper (Cu) that at high exposure may co-influence welding-related neurotoxicity. The relationship between brain accumulation of these metals and neuropathology, especially in welders with subclinical exposure levels, is unclear. This study examined the microstructural integrity of basal ganglia (BG) regions in asymptomatic welders using diffusion tensor imaging (DTI). Subjects with (n = 43) and without (age- and gender-matched controls; n = 31) history of welding were studied. Occupational questionnaires estimated short-term (HrsW; welding hours and E90; cumulative exposure, past 90 days) and long-term (YrsW; total years welding and ELT; cumulative exposure, lifetime) exposure. Whole blood metal levels (Mn, Fe, and Cu) were obtained. Brain MRI pallidal index (PI), R1 (1/T1), and R2* (1/T2*) were measured to estimate Mn and Fe accumulation in BG [caudate, putamen, and globus pallidus (GP)]. DTI was used to assess BG microstructural differences, and related with exposure measurements. When compared with controls, welders had significantly lower fractional anisotropy (FA) in the GP. In welders, GP FA values showed non-linear relationships to YrsW, blood Mn, and PI. GP FA decreased after a critical level of YrsW or Mn was reached, whereas it decreased with increasing PI values until plateauing at the highest PI values. GP FA, however, did not show any relationship with short-term exposure measurements (HrsW, E90), blood Cu and Fe, or R(2)* values. GP FA captured microstructural changes associated with chronic low-level Mn exposure, and may serve as a biomarker for neurotoxicity in asymptomatic welders. © The Author 2016. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Immunological evaluation of four arc welders exposed to fumes from ignited polyurethane (isocyanate) foam: antibodies and immune profiles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Broughton, A.; Thrasher, J.D.; Gard, Z.

1988-01-01

Four arc welders having a flu-like illness with multiple health complaints following an exposure to high concentrations of isocyanate fumes from ignited polyurethane foam underwent immunological tests as follows: ELISA antibody assays, activated lymphocyte profiles, and lymphocyte blastogenesis. ELISA procedures revealed the presence of antibodies to hexamethylene diisocyanate (HDI) and formaldehyde (F) conjugated to human serum albumin (HDI-SA and F-SA). The results from the activated lymphocyte profiles showed deviations from the norm as follows: three welders had elevated helper/suppressor (H/S) ratios; all four had elevated percentages of Tal positive cells; two had decreases in B cells; and one had lowmore » total white cell and lymphocyte counts. In contrast, the percentage and absolute numbers of ILS receptor cells were normal in the four subjects. T cell blastogenesis to PHA, Con A and PWM resulted in the following: T-cells from one subject responded normally; in another, a high response (212% of controls) to PHA occurred with normal mitogenesis to Con A and PWM. In the remaining two welders, the T cells responded abnormally low (50 to 75% of controls) to the three mitogens. In conclusion, the existence of IgG antibodies to HDI-SA and F-SA, the altered activated immune profiles, the elevated Tal cells, and the abnormal blastogenesis are interpreted as being linked with the episode of HDI and F exposure and the subsequent flu-like illness of the four welders.« less

Editor’s Highlight: Lower Fractional Anisotropy in the Globus Pallidus of Asymptomatic Welders, a Marker for Long-Term Welding Exposure

PubMed Central

Lee, Eun-Young; Flynn, Michael R.; Du, Guangwei; Lewis, Mechelle M.; Herring, Amy H.; Van Buren, Eric; Van Buren, Scott; Kong, Lan; Mailman, Richard B.; Huang, Xuemei

2016-01-01

Introduction: Welding fumes contain several metals including manganese (Mn), iron (Fe), and copper (Cu) that at high exposure may co-influence welding-related neurotoxicity. The relationship between brain accumulation of these metals and neuropathology, especially in welders with subclinical exposure levels, is unclear. This study examined the microstructural integrity of basal ganglia (BG) regions in asymptomatic welders using diffusion tensor imaging (DTI). Methods: Subjects with (n = 43) and without (age- and gender-matched controls; n = 31) history of welding were studied. Occupational questionnaires estimated short-term (HrsW; welding hours and E90; cumulative exposure, past 90 days) and long-term (YrsW; total years welding and ELT; cumulative exposure, lifetime) exposure. Whole blood metal levels (Mn, Fe, and Cu) were obtained. Brain MRI pallidal index (PI), R1 (1/T1), and R2* (1/T2*) were measured to estimate Mn and Fe accumulation in BG [caudate, putamen, and globus pallidus (GP)]. DTI was used to assess BG microstructural differences, and related with exposure measurements. Results: When compared with controls, welders had significantly lower fractional anisotropy (FA) in the GP. In welders, GP FA values showed non-linear relationships to YrsW, blood Mn, and PI. GP FA decreased after a critical level of YrsW or Mn was reached, whereas it decreased with increasing PI values until plateauing at the highest PI values. GP FA, however, did not show any relationship with short-term exposure measurements (HrsW, E90), blood Cu and Fe, or R2* values. Conclusion: GP FA captured microstructural changes associated with chronic low-level Mn exposure, and may serve as a biomarker for neurotoxicity in asymptomatic welders. PMID:27466214

LOOKING ALONG HALE ALII AVENUE TOWARD SHIPYARD AREA. FACILITIES 1040 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

LOOKING ALONG HALE ALII AVENUE TOWARD SHIPYARD AREA. FACILITIES 1040 AND 1041 (QUARTERS 1 AND J) AT LEFT. VIEW FACING SOUTHWEST. - U.S. Naval Base, Pearl Harbor, Naval Housing Area Hale Alii, Hale Alii Avenue, Eighth Street, & Avenue D, Pearl City, Honolulu County, HI

The development of internet based ship design support system for small and medium sized shipyards

NASA Astrophysics Data System (ADS)

Shin, Sung-Chul; Lee, Soon-Sup; Kang, Dong-Hoon; Lee, Kyung-Ho

2012-03-01

In this paper, a prototype of ship basic planning system is implemented for the small and medium sized shipyards based on the internet technology and concurrent engineering concept. The system is designed from the user requirements. Consequently, standardized development environment and tools are selected. These tools are used for the system development to define and evaluate core application technologies. The system will contribute to increasing competitiveness of small and medium sized shipyards in the 21st century industrial en-vironment.

Neurologic manifestations in welders with pallidal MRI T1 hyperintensity.

PubMed

Josephs, K A; Ahlskog, J E; Klos, K J; Kumar, N; Fealey, R D; Trenerry, M R; Cowl, C T

2005-06-28

Neurologic symptoms have been attributed to manganese fumes generated during welding. Increased T1 MRI signal in the basal ganglia is a biologic marker of manganese accumulation. Recent studies have associated welding and parkinsonism, but generally without MRI corroboration. To characterize the clinical and neuropsychological features of patients with MRI basal ganglia T1 hyperintensity, who were ultimately diagnosed with neurotoxicity from welding fumes. The medical records of welders referred to the Department of Neurology with neurologic problems and basal ganglia T1 hyperintensity were reviewed. All eight patients were male career welders with increased T1 basal ganglia signal on MRI of the brain. Several different clinical syndromes were recognized: a parkinsonian syndrome (three patients), a syndrome of multifocal myoclonus and limited cognitive impairment (two patients), a mixed syndrome with vestibular-auditory dysfunction (two patients), and minor subjective cognitive impairment, anxiety, and sleep apnea (one patient). Neuropsychometric testing suggested subcortical or frontal involvement. Inadequate ventilation or lack of personal respiratory protection during welding was a common theme. Welding without proper protection was associated with syndromes of parkinsonism, multifocal myoclonus, mild cognitive impairment, and vestibular-auditory dysfunction. The MRI T1 hyperintensity in the basal ganglia suggests that these may have been caused by manganese neurotoxicity.

Increased risk of parkinsonism associated with welding exposure

PubMed Central

Racette, Brad A.; Criswell, Susan R.; Lundin, Jessica I.; Hobson, Angela; Seixas, Noah; Kotzbauer, Paul T.; Evanoff, Bradley A.; Perlmutter, Joel S.; Zhang, Jing; Sheppard, Lianne; Checkoway, Harvey

2013-01-01

Objective Manganese (Mn), an established neurotoxicant, is a common component of welding fume. The neurological phenotype associated with welding exposures has not been well described. Prior epidemiologic evidence linking occupational welding to parkinsonism is mixed, and remains controversial. Methods This was a cross-sectional and nested case–control study to investigate the prevalence and phenotype of parkinsonism among 811 shipyard and fabrication welders recruited from trade unions. Two reference groups included 59 non-welder trade workers and 118 newly diagnosed, untreated idiopathic PD patients. Study subjects were examined by a movement disorders specialist using the Unified Parkinson Disease Rating Scale motor subsection 3 (UPDRS3). Parkinsonism cases were defined as welders with UPDRS3 score ≥15. Normal was defined as UPDRS3 < 6. Exposure was classified as intensity adjusted, cumulative years of welding. Adjusted prevalence ratios for parkinsonism were calculated in relation to quartiles of welding years. Results The overall prevalence estimate of parkinsonism was 15.6% in welding exposed workers compared to 0% in the reference group. Among welders, we observed a U-shaped dose–response relation between weighted welding exposure-years and parkinsonism. UPDRS3 scores for most domains were similar between welders and newly diagnosed idiopathic Parkinson disease (PD) patients, except for greater frequency of rest tremor and asymmetry in PD patients. Conclusion This work-site based study among welders demonstrates a high prevalence of parkinsonism compared to nonwelding-exposed workers and a clinical phenotype that overlaps substantially with PD. PMID:22975422

Accomplishing Shipyard Work for the United States Navy; Institutions, Systems and Operations. Volume 2. Appendixes

DTIC Science & Technology

1975-08-01

side #I MOC0ede.V en.d 14119111Iy by 61leek number) Ths study examines factors relating to acconrmlish-ment of Navy ship work- ~ .loads in navtal and...concludes with recomnendations to improve the cost-effectiveness of performance of shipyard work and identifies several key areas for further study . Volume 2...documents related to subjects covered by this study . r• "I. . " r . SECURITY CO OF ° P Ova’" 0.... ......:i • #0 PAPER P-1 13 2 ACCOMPLISHING SHIPYARD WORK

Guide for the Training and Qualification of Welding Personnel. Level III - Expert Welders.

ERIC Educational Resources Information Center

American Welding Society, Miami, FL.

This guide is designed to help education and training facilities develop and administer competency-based training programs to qualify and certify trainees in accordance with American Welding Society (AWS) requirements for level III (expert) welders. Presented first are the scope/objectives/requirements of the AWS qualification/certification…

Guide for the Training and Qualification of Welding Personnel. Level II - Advanced Welders.

ERIC Educational Resources Information Center

American Welding Society, Miami, FL.

This guide is designed to help education and training facilities develop and administer competency-based training programs to qualify and certify trainees in accordance with the American Welding Society (AWS) requirements for level II (advanced) welders. Presented first are the scope, objectives, and requirements of the AWS…

Heavy metals found in the breathing zone, toenails and lung function of welders working in an air-conditioned welding workplace.

PubMed

Hariri, Azian; Mohamad Noor, Noraishah; Paiman, Nuur Azreen; Ahmad Zaidi, Ahmad Mujahid; Zainal Bakri, Siti Farhana

2017-09-22

Welding operations are rarely conducted in an air-conditioned room. However, a company would set its welding operations in an air-conditioned room to maintain the humidity level needed to reduce hydrogen cracks in the specimen being welded. This study intended to assess the exposure to metal elements in the welders' breathing zone and toenail samples. Heavy metal concentration was analysed using inductively coupled plasma mass spectrometry. The lung function test was also conducted and analysed using statistical approaches. Chromium and manganese concentrations in the breathing zone exceeded the permissible exposure limit stipulated by Malaysian regulations. A similar trend was obtained in the concentration of heavy metals in the breathing zone air sampling and in the welders' toenails. Although there was no statistically significant decrease in the lung function of welders, it is suggested that exposure control through engineering and administrative approaches should be considered for workplace safety and health improvement.

The National Shipbuilding Research Program. Shipyard Title V Permit Application

DTIC Science & Technology

1997-02-01

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .....26 TRIVAL ...adding or removing materials. 9. Welding Operations Welding rods used in shipyards contain chromium , some of which is emitted during welding operations...jurisdictions, in fact, welding is a “trivial” or “insignificant” activity for Title V purposes. Welding fumes are extracted from some enclosed work

Exposure to hexavalent chromium in welders: Results of the WELDOX II field study.

PubMed

Pesch, Beate; Lehnert, Martin; Weiss, Tobias; Kendzia, Benjamin; Menne, Eleonore; Lotz, Anne; Heinze, Evelyn; Behrens, Thomas; Gabriel, Stefan; Schneider, Wolfgang; Brüning, Thomas

2018-03-12

Exposure to hexavalent chromium (Cr(VI)) has been primarily studied in chromate production. Here, we measured personal exposure to respirable Cr(VI) together with airborne and urinary Cr and Ni in welders to explore levels and associations between various measures of exposure. Shift concentrations of Cr(VI), Cr, and Ni were measured in respirable welding fumes in 50 men who used either gas metal arc welding (GMAW) (n = 24) or tungsten inert gas welding (TIG) (n = 19) as their major technique. Cr and Ni were determined in pre- and post-shift urine samples. Concentrations below the limit of quantification (LOQ) were multiply imputed. Spearman correlation coefficients (rs) were calculated with 95% confidence intervals (CIs) to explore associations between the exposure variables, and regression models were applied to estimate the effect of the parent metal on the urinary concentration. Regarding the respirable Cr(VI), 62% of the measurements were below the LOQ, the 75th percentile was 0.50 µg m-3, and 8 out of 50 (16%) welders exceeded 1 µg m-3. The highest shift concentration that occurred as a result of shielded metal arc welding (SMAW) was 180 µg m-3. The Cr(VI) content in total Cr ranged from 4 to 82% (median 20%), although the concentration correlated with total Cr (rs 0.55, 95% CI 0.46; 0.64). The correlation between Cr(VI) and Ni was weaker (rs 0.42, 95% CI 0.34; 0.51) than that between total Cr and Ni in welding fumes (rs 0.83, 95% CI 0.74; 0.92). Both Cr(VI) and total Cr influenced the urinary Cr concentrations in post-shift samples (P = 0.0008 and P ≤ 0.0001, respectively). The airborne shift exposure was a weaker determinant than the Cr content in pre-shift urine samples, which strongly correlated with post-shift urinary Cr (rs 0.78, 95% CI 0.69; 0.87). The Cr(VI) content in total Cr varied considerably in welding fumes. The majority of welders using GMAW or TIG presented with shift concentrations of respirable Cr(VI) below 1 µg m-3. However, very high

Implementing the Mission-Funded Naval Shipyard: A Case Study on Change Management

DTIC Science & Technology

2004-06-01

C. THE MANAGEMENT OF CHANGE.........................................................12 D. GUIDANCE FOR MANAGING ORGANIZATIONAL CHANGE .........14 1...organization like the naval shipyard as it adapts to its environmental change. D. GUIDANCE FOR MANAGING ORGANIZATIONAL CHANGE Much of today’s

Erythrocyte antioxidant enzyme activities and lipid peroxidation in the erythrocyte membrane of stainless-steel welders exposed to welding fumes and gases.

PubMed

Imamoglu, Nalan; Yerer, Mükerrem-Betül; Donmez-Altuntas, Hamiyet; Saraymen, Recep

2008-03-01

The erythrocyte antioxidant system (superoxide dismutase, SOD; catalase, CAT) and lipid peroxidation (malondialdehyde, MDA) in the erythrocyte membrane were studied in workers continously exposed to welding fumes and gases, which are thought to be oxidant pollutants. Thirty-five welders using the manual metal arc method on stainless steel and 30 controls were studied. Plasma chromium (Cr), manganese (Mn), and cupper (Cu) levels were determined by atomic absorption spectrophotometer (AAS). The erythrocyte antioxidant system activity and lipid peroxidation in the erythrocyte membrane were evaluated. Not only the possible effects of welding fumes but also the effects of smoking were considered. The plasma concentrations of Cr, Mn, and Cu for the exposed welders were significantly higher compared to the control subjects (p<0.001, p<0.01, p<0.001, respectively,). The erythrocyte CAT (p<0.05) and SOD (p<0.05) enzyme activities were significantly higher in the welders but there were not any significant changes in the MDA levels which reflect the lipid peroxidation in the erythrocyte membrane (p>0.05). Smoking has increased the SOD activity in both controls (p<0.05) and welders (p<0.01) and increased the CAT activity in control subjects (p<0.05). Moreover, regardless of smoking, there were some significant correlations between the duration of the exposure to welding fumes and antioxidant defence system (SOD: p<0.05; CAT: p<0.05). The synergistic effects of smoking and other risk factors (welding fumes and gases), which had been shown previously by some clinical data should also be taken into account. As a consequence, the welders should be warned and informed of the synergistic effects of smoking on the adverse effect of welding fumes and gases.

Manganese Research Health Project (MHRP)

DTIC Science & Technology

2009-02-01

Employees; Jobs 2) Plant / Premises, covering • Processes ; Workplaces; Tasks 3) Exposure surveys with details of • Survey planning...therefore started at one of the two plants that were investigated in 2003. In the first of these plants (a shipyard) 28 welders out of 40 that were also...5 examined in 2003 have so far been examined. The focus is currently on the second of these plants (a heavy machinery construction plant ), and so

Portsmouth Naval Shipyard Microgrid and Ancillary Services - Kittery, ME

DTIC Science & Technology

2017-08-30

revenue through participation in ancillary services . Both technologies offer quantifiable value to a project. 7.1 COST MODEL Table 7-1. Cost Model...EW-201350) Portsmouth Naval Shipyard Microgrid and Ancillary Services – Kittery, ME August 2017 This document has been cleared for public...commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement

Problem Solving and Training Guide for Shipyard Industrial Engineers

DTIC Science & Technology

1986-06-01

Design Integration Tools Building 192 Room 128 9500 MacArthur Blvd Bethesda, MD 20817-5700 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING...called upon to increase the knowledge about industrial engineering of some shipyard group. The Curriculum is seen especially as a tool to identify new...materials on all common machine shop tools . Data permits calculation of machining time. 085 Ostwald, Phillip F. AMERICAN MACHINIST MANUFACTURING COST

High signal intensity on magnetic resonance imaging is a better predictor of neurobehavioral performances than blood manganese in asymptomatic welders.

PubMed

Chang, Yongmin; Kim, Yangho; Woo, Seung-Tae; Song, Hui-Jin; Kim, Suk Hwan; Lee, Hun; Kwon, Young Joo; Ahn, Joon-Ho; Park, Sin-Jae; Chung, In-Sung; Jeong, Kyoung Sook

2009-07-01

The aim of the study was to evaluate subclinical neurological effects in welders, using an extensive list of neurobehavioral batteries and determine if there is a link between pallidal index (PI) and subclinical neurobehavioral effects in the spectrum of manganese (Mn) symptomatology. A total of 43 asymptomatic male welders and 29 age- and sex-matched healthy control individuals completed questionnaires, and underwent blood examinations, brain magnetic resonance imaging (MRI) scans, and a wide range of neurobehavioral examinations. Digit symbol, auditory verbal learning test (delayed recall), complex figure test (copy and immediate recall), digit span, verbal fluency test, Stroop test, grooved pegboard, finger tapping, frequency dispersion and harmonic index of tremor, and maximum frequency of hand coordination showed differences between welders and control individuals. No differences were noted for simple reaction time, postural sway, smell test, and profile of mood states (POMS). Blood Mn levels were shown to be significantly associated with grooved pegboard (dominant hand) and complex figure test (copy) results. PI was significantly associated with digit symbol, digit span backward, Stroop Word and Stroop error index, and grooved pegboard (dominant hand) results. The present findings that there were significant correlations between several neurobehavioral deficits and PI as well as blood Mn suggest that they may be attributed to Mn exposure in welding fumes. The present study also shows that PI is a better predictor of neurobehavioral performance than blood Mn levels in asymptomatic welders.

[Business and Education Standards Program - Development of Standards and Certification for Welders]. Final Report.

ERIC Educational Resources Information Center

American Welding Society, Miami, FL.

The American Welding Society (AWS) Education Grant Committee was organized in 1993 to unite employers, trade unions, educators, technical specialists, welding equipment manufacturers, and AWS members in efforts to develop national skills standards for training and certifying entry-level, advanced, and expert welders. Data were collected through…

Dose-dependent progression of parkinsonism in manganese-exposed welders

PubMed Central

Searles Nielsen, Susan; Criswell, Susan R.; Sheppard, Lianne; Seixas, Noah; Warden, Mark N.; Checkoway, Harvey

2017-01-01

Objective: To determine whether the parkinsonian phenotype prevalent in welders is progressive, and whether progression is related to degree of exposure to manganese (Mn)-containing welding fume. Methods: This was a trade union–based longitudinal cohort study of 886 American welding-exposed workers with 1,492 examinations by a movement disorders specialist, including 398 workers with 606 follow-up examinations up to 9.9 years after baseline. We performed linear mixed model regression with cumulative Mn exposure as the independent variable and annual change in Unified Parkinson Disease Rating Scale motor subsection part 3 (UPDRS3) as the primary outcome, and subcategories of the UPDRS3 as secondary outcomes. The primary exposure metric was cumulative Mn exposure in mg Mn/m3-year estimated from detailed work histories. Results: Progression of parkinsonism increased with cumulative Mn exposure. Specifically, we observed an annual change in UPDRS3 of 0.24 (95% confidence interval 0.10–0.38) for each mg Mn/m3-year of exposure. Exposure was most strongly associated with progression of upper limb bradykinesia, upper and lower limb rigidity, and impairment of speech and facial expression. The association between welding exposure and progression appeared particularly marked in welders who did flux core arc welding in a confined space or workers whose baseline examination was within 5 years of first welding exposure. Conclusions: Exposure to Mn-containing welding fume may cause a dose-dependent progression of parkinsonism, especially upper limb bradykinesia, limb rigidity, and impairment of speech and facial expression. PMID:28031394

Increased risk of parkinsonism associated with welding exposure.

PubMed

Racette, Brad A; Criswell, Susan R; Lundin, Jessica I; Hobson, Angela; Seixas, Noah; Kotzbauer, Paul T; Evanoff, Bradley A; Perlmutter, Joel S; Zhang, Jing; Sheppard, Lianne; Checkoway, Harvey

2012-10-01

Manganese (Mn), an established neurotoxicant, is a common component of welding fume. The neurological phenotype associated with welding exposures has not been well described. Prior epidemiologic evidence linking occupational welding to parkinsonism is mixed, and remains controversial. This was a cross-sectional and nested case-control study to investigate the prevalence and phenotype of parkinsonism among 811 shipyard and fabrication welders recruited from trade unions. Two reference groups included 59 non-welder trade workers and 118 newly diagnosed, untreated idiopathic PD patients. Study subjects were examined by a movement disorders specialist using the Unified Parkinson Disease Rating Scale motor subsection 3 (UPDRS3). Parkinsonism cases were defined as welders with UPDRS3 score ≥15. Normal was defined as UPDRS3<6. Exposure was classified as intensity adjusted, cumulative years of welding. Adjusted prevalence ratios for parkinsonism were calculated in relation to quartiles of welding years. The overall prevalence estimate of parkinsonism was 15.6% in welding exposed workers compared to 0% in the reference group. Among welders, we observed a U-shaped dose-response relation between weighted welding exposure-years and parkinsonism. UPDRS3 scores for most domains were similar between welders and newly diagnosed idiopathic Parkinson disease (PD) patients, except for greater frequency of rest tremor and asymmetry in PD patients. This work-site based study among welders demonstrates a high prevalence of parkinsonism compared to nonwelding-exposed workers and a clinical phenotype that overlaps substantially with PD. Copyright © 2012 Elsevier Inc. All rights reserved.

Effective sexual harassment policies: unexpected lessons from Jacksonville Shipyards.

PubMed

Connell, D S

1991-01-01

Although many employers recognize the need for an effective sexual harassment policy, they have received only limited guidance from the EEOC and the courts on how to draft and implement one. This article examines a recent decision, Robinson v. Jacksonville Shipyards, in which the court imposed a comprehensive sexual harassment policy. This article suggests that employers should consider adopting similar policies to better protect themselves from liability for sexual harassment.

The National Shipbuilding Research Program. 1995 Ship Production Symposium. Paper No. 10: Robot Technology in the Shipyard Production Environment

DTIC Science & Technology

1995-01-01

CHALLENGE It is possible to divide the shipyard industry into three categories the yards which have no experience whatsoever with robot production...INNOVATION MARINE INDUSTRY STANDARDS WELDING INDUSTRIAL ENGINEERING EDUCATION AND TRAINING THE NATIONAL SHIPBUILDING RESEARCH PROGRAM January, 1995 NSRP 0439...1995 Ship Production Symposium Paper No . 10: Robot Technology in the Shipyard Production Environ- ment U.S. DEPARTMENT OF THE NAVY CARDEROCK DIVISION

Magnetic characteristics of sediment grains concurrently contaminated with TBT and metals near a shipyard in Busan, Korea.

PubMed

Choi, Jin Young; Hong, Gi Hoon; Ra, Kongtae; Kim, Kyung-Tae; Kim, Kyoungrean

2014-08-30

Bottom sediments near shipyards are often susceptible to receiving accidental spills of TBT and metals or their degradation products from hull scraping of antifouling system paints applied prior to 2008, when the AFS Convention 2001 was not in force. We investigated TBT and metal contamination of sediments near the shipyards of a small marina located in Busan, Korea and found that they were highly contaminated with TBT, Cu, and Zn. To better understand the environmental impacts and to make an optimal remediation plan, we characterized individual antifouling fragments in terms of metal and TBT contents, magnetic properties, and grain-size. Coarse-sized individual antifouling fragments exhibited simultaneously high levels of TBT, metals and high magnetic susceptibility, and appeared to be a major source of pollution in the sediment. Therefore, magnetic separation in combination with size-separation appears to be a cost-effective remediation method to remove the TBT and metals from contaminated shipyard sediments. Copyright © 2014 Elsevier Ltd. All rights reserved.

Stormwater Collection, Treatment, Recycling and Reuse in a Shipyard

DTIC Science & Technology

1999-05-26

effluent is monitored as if it was a confined, discrete source. Where tributyltin ( TBT ) paint is removed or applied to ships, it is one of the...ppt TBT limit). Based on NURP findings and the monitoring requirements of many shipyards, it would appear that copper, zinc, and lead would be likely...candidates for numeric limits on stormwater discharges. Stormwater discharge limits for tributyl tin ( TBT ) may also occur in the future; limits of 50

AGOR 28: SIO Shipyard Representative Bi-Weekly Progress Report

DTIC Science & Technology

2015-01-29

Crane FAT at Sherwood, OR iii. Design Review at Anacortes 2. The following Shipyard Question Submittals were reviewed and commented on: No...two 100-kw chill water heaters for HVAC winter operation. New for this reporting period – DCI is installing the hardware (cables and shut trips) to...the two 100-kw HVAC heaters and the galley equipment breakers. • Main Crane Towing & Coring Crutch – The crutch assembly being provided by Allied

AGOR 28: SIO Shipyard Representative Bi-Weekly Progress Report

DTIC Science & Technology

2015-01-16

Crane FAT at Sherwood, OR iii. Design Review at Anacortes 2. The following Shipyard Question Submittals were reviewed and commented on: No...include the two Chiller units and the two 100-kw chill water heaters for HVAC winter operation. Report Documentation Page Form ApprovedOMB No. 0704...MLV HVAC Room Foc’sle Deck – Partial installation only in area where machinery has been placed. Most of the overhead and bulkheads have no

33 CFR 334.1100 - San Pablo Bay, Carquinez Strait, and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare...

Code of Federal Regulations, 2012 CFR

2012-07-01

... part of the Navy Yard, Mare Island, south of the causeway between the City of Vallejo and Mare Island..., and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. 334.1100... Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. (a) The area. The waters...

33 CFR 334.1100 - San Pablo Bay, Carquinez Strait, and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare...

Code of Federal Regulations, 2011 CFR

2011-07-01

... part of the Navy Yard, Mare Island, south of the causeway between the City of Vallejo and Mare Island..., and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. 334.1100... Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. (a) The area. The waters...

33 CFR 334.1100 - San Pablo Bay, Carquinez Strait, and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare...

Code of Federal Regulations, 2010 CFR

2010-07-01

... part of the Navy Yard, Mare Island, south of the causeway between the City of Vallejo and Mare Island..., and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. 334.1100... Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. (a) The area. The waters...

33 CFR 334.1100 - San Pablo Bay, Carquinez Strait, and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare...

Code of Federal Regulations, 2013 CFR

2013-07-01

... part of the Navy Yard, Mare Island, south of the causeway between the City of Vallejo and Mare Island..., and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. 334.1100... Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. (a) The area. The waters...

33 CFR 334.1100 - San Pablo Bay, Carquinez Strait, and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare...

Code of Federal Regulations, 2014 CFR

2014-07-01

... part of the Navy Yard, Mare Island, south of the causeway between the City of Vallejo and Mare Island..., and Mare Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. 334.1100... Island Strait in vicinity of U.S. Naval Shipyard, Mare Island; restricted area. (a) The area. The waters...

Environmental management aspects for TBT antifouling wastes from the shipyards.

PubMed

Kotrikla, Anna

2009-02-01

Tributyltin (TBT)-based antifouling paints have been successfully used for over 40 years to protect a ship's hull from biofouling. However, due to its high toxicity to marine organisms, the International Maritime Organization (IMO), in 1990, adopted a resolution recommending governments to adopt measures to eliminate antifouling paints containing TBT. High concentrations of TBT are detected in the vicinity of ports and shipyards. TBT is also usually detected in the sediment, in which it accumulates. This study reviews recent literature for the best management practices (BMPs) in order to minimize the environmental effects of TBT. The paper focuses on the evaluation of the available techniques for the removal of TBT from shipyard wastes and from the sediment. The most effective treatment methods are highlighted. BMPs include recycling of abrasive materials, use of cleaner abrasive materials, reuse of spent abrasive materials, substitution of hydroblasting by vacuum blasting or containment or ultra-high-pressure water blasting and confinement of pollution by enclosure and containment systems. The treatment of the TBT wastes by conventional biological wastewater treatment processes is probably not suitable, because the concentrations of TBT found in shipyards' wastewaters are toxic to microorganisms. Advanced technologies such as activated carbon adsorption and dissolved air flotation, in combination with filtration and coagulation-clarification, photodegradation and electrochemical treatment, are required to remove TBT. However, advanced methods should be further optimized to meet the regulatory limit of 200 ng/L. To date, only one published work examines the efficiency of incineration for the treatment of solid sandblast wastes. Regarding the treatment of sediment, land deposition of the less polluted fraction of sediment is a feasible option. Such treatment must take into account the risk of contamination of groundwater and the surroundings, and it requires

Mortality among Coast Guard Shipyard workers: A retrospective cohort study of specific exposures.

PubMed

Rusiecki, Jennifer; Stewart, Patricia; Lee, Dara; Alexander, Melannie; Krstev, Srmena; Silverman, Debra; Blair, Aaron

2018-01-02

In a previous analysis of a cohort of shipyard workers, we found excess mortality from all causes, lung cancer, and mesothelioma for longer work durations and in specific occupations. Here, we expand the previous analyses by evaluating mortality associated with 5 chemical exposures: asbestos, solvents, lead, oils/greases, and wood dust. Data were gathered retrospectively for 4,702 workers employed at the Coast Guard Shipyard, Baltimore, MD (1950-1964). The cohort was traced through 2001 for vital status. Associations between mortality and these 5 exposures were calculated via standardized mortality ratios (SMRs). We found all 5 substances to be independently associated with mortality from mesothelioma, cancer of the respiratory system, and lung cancer. Findings from efforts to evaluate solvents, lead, oils/greases, and wood dust in isolation of asbestos suggested that the excesses from these other exposures may be due to residual confounding from asbestos exposure.

Naval Shipyard Apprentice Program & Community-Technical College Linkages: A Model for Success.

ERIC Educational Resources Information Center

Cantor, Jeffrey A.

Each of the eight shipyards operated by the U.S. Navy administers a formal 4-year apprentice trades training program. The apprentice programs combine daily on-the-job training with classroom instruction in technical subjects related to work requirements, including shop math, chemistry, physics, and mechanical drafting. The programs are designed to…

[The Influence of risk factors on visual performance in of phototoxic maculopathy in occupational welders].

PubMed

Li, Qingtao; Zhang, Xinfang

2014-10-01

To investigate the Influence of risk factors that cause the phototoxic maculopathy by welding arc in occupational welders. We examined randomly a group of 86 male occupational welders 172 eyes from some local metal manufacturing enterprise from August 2010 to December 2013. The ophthalmologic examination which the participants underwent thorough including the best visual acuity, fundus examination by the supplementary lens, fundus photography, and the high definition optical coherence tomography (OCT) scan. All participants of this study underwent thorough the medicine examined by a specialist of occupational who prior to the OCT. All the subjects were divided into groups according to age, protection degrees , length of service, operating time . The incidences of phototoxic maculopathy were compared within groups. The subjects was divided randomly into the lutein group and the placebo group. The examination including the best visual acuity, serum lutein concentrations, macular pigmentoptical density (MPOD), Contrast and glare Sensitivity. (1) The total incidence of phototoxic maculopathy is 32.0%. (2) The incidences of phototoxic maculopathy in the strict protection group, the randomed protective group and the nonprofessional protection group were respectively 21.4%, 36.7%, 53.6%. The incidence in the strict protection group was lower than the other two groups, the incidence was the highest in the nonprofessional protection group, and the difference was statistically significant. (3) The longer length of service, and operating time , the more incidence of phototoxic maculopathy develop. (4) The lutein group prior to the placebo group at the best visual acuity, serum lutein concentrations, macular pigmentoptical density (MPOD), Contrast and glare Sensitivity. The risk factors of phototoxic maculopathy in male occupational welders are the length of service, operating time, protection degrees and the lutein assistantly. The incidence of phototoxic maculopathy occurs

Philosophy for Welders: Colleges Offer Innovative Humanities Curricula for Liberal Arts and Career Track Students Alike

ERIC Educational Resources Information Center

Finkel, Ed

2016-01-01

Does America needs more welders and fewer philosophers? Community college humanities professors and administrators say it benefits all students, whether liberal arts or career track, to take courses in philosophy, history, political science, language arts, and other liberal arts subjects. And they're developing innovative humanities curricula to…

Lead in a Baltimore shipyard.

PubMed

Hall, Francis X

2006-12-01

The goal was to monitor the effectiveness of the Coast Guard Yard's lead program by comparing a shipyard period in 1991 to one in 2002-2003. Comparisons of airborne lead levels by paint removal techniques, airborne lead levels by welding techniques, and blood lead levels of workers were evaluated by chi2 analysis. Airborne lead levels in paint removal techniques decreased over time for all methods used. Airborne lead levels in welding techniques decreased over time for all methods used. Blood lead levels of the high-risk group revealed a 2-fold reduction (prevalence rate ratio = 8.3; 95% confidence interval, 3.7-18.6) and in the low-risk group revealed a 1.6-fold reduction (prevalence rate ratio = 6.2; 95% confidence interval, 0.86-44.7). The Coast Guard Yard runs an effective lead program that exceeds the national Healthy People 2010 goal for lead. The results validate the Coast Guard Yard's use of air-line respirators and lead-free paint on all vessels.

77 FR 5277 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Shipyard...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

... of Labor (DOL) is submitting the Occupational Safety and Health Administration (OSHA) sponsored... and Health Administration (OSHA), Office of Management and Budget, Room 10235, Washington, DC 20503... Health Administration (OSHA). Title of Collection: Standard on Shipyard Employment (29 CFR part 1915...

Occupational exposure to manganese-containing welding fumes and pulmonary function indices among natural gas transmission pipeline welders.

PubMed

Hassani, Hamid; Golbabaei, Farideh; Ghahri, Asghar; Hosseini, Mostafa; Shirkhanloo, Hamid; Dinari, Behnam; Eskandari, Davood; Fallahi, Majid

2012-01-01

The objectives of this study were to evaluate manganese (Mn)-containing welding fumes' exposure, assess urinary Mn as a biomarker for Mn exposure and investigate the correlation of Mn in air, total fumes and urinary Mn with pulmonary function indices in 118 welders and 37 unexposed controls from two regions in Iran, Assaluyeh and Borujen. Air samples were collected on mixed cellulose ester membrane filters in personal air samplers and then analyzed using inductively coupled plasma atomic emission spectroscopy (ICP-AES) (NIOSH Method 7300). For all participants, urine samples were collected during the entire work shift, and Mn in urine was determined by graphite furnace atomic absorption spectroscopy according to NIOSH Method 8310. Spirometric measurements were also done for participants. The maximum exposures to airborne Mn and total fumes were 0.304 ± 0.256 mg/m(3) and 21.52 ± 9.40 mg/m(3), respectively. The urine Mn levels in the various groups ranged between 0.77 to 7.58 μg/l. The correlation between airborne Mn and urinary Mn was significant for total whole participants. Some values of spirometric indices were statistically lower in welders rather than controls. Our results indicate that many welders have been exposed to higher concentrations of Mn-containing welding fumes. Urinary Mn can be used as a biomarker for Mn exposure. There were weak inverse correlations between Mn-containing welding fumes and pulmonary function indices, and the inverse correlation between urinary Mn with forced vital capacities (FVC) and forced expiratory volume in 1 s (FEV1) was significant.

In vitro assessment of equivalence of occupational health risk: welders.

PubMed Central

Stern, R M

1983-01-01

The possibility of using in vitro testing to determine the equivalence of risk for various occupational groups is discussed. In the absence of epidemiological evidence or relevant animal in vivo bioassays on which to determine the health effects of specific occupational exposures, it is proposed to use similarities in the in vitro response to substances with known (or strongly suspected) and unknown risk to demonstrate their risk equivalence. Identification and evaluation of a high risk "hot spot" due to exposure to Cr(VI) for stainless steel welders is discussed in terms of recent developments in collection, analysis and bioassay of welding fumes. PMID:6641655

The National Shipbuilding Research Program. A Shipyard Program for NPDES Compliance

DTIC Science & Technology

2000-11-15

INNOVATION MARINE INDUSTRY STANDARDS WELDING INDUSTRIAL ENGINEERING EDUCATION AND TRAINING THE NATIONAL SHIPBUILDING RESEARCH PROGRAM November 15, 2000 NSRP...software as provided with this report. Software Requirements (both optional): TecPlot Version 7.0 or later Available from: Amtec Engineering, Inc. 13920 SE...Region Atlantic Marine 4 Avondale 6 Bath Iron Works 1 Electric Boat Corp. 1 Ingalls 4 NASSCO 9 Newport News 3 Puget Sound Naval Shipyard 10 Table 1

Circulating adhesion molecules after short-term exposure to particulate matter among welders.

PubMed

Fang, S C; Eisen, E A; Cavallari, J M; Mittleman, M A; Christiani, D C

2010-01-01

Studies from several countries indicate that welders experience increased risk of mortality and morbidity from ischaemic heart disease. Although the underlying mechanisms are unclear, vascular responses to particulate matter contained in welding fumes may play a role. To investigate this, we studied the acute effects of welding fume exposure on the endothelial component of vascular function, as measured by circulating adhesion molecules involved in leukocyte adhesion (sICAM-1 and sVCAM-1) and coagulation (vWF). A panel of 26 male welders was studied repeatedly across a 6 h work-shift on a high exposure welding day and/or a low exposure non-welding day. Personal PM(2.5) exposure was measured throughout the work-shift. Blood samples were collected in the morning (baseline) prior to the exposure period, immediately after the exposure period, and the following morning. To account for the repeated measurements, we used linear mixed models to evaluate the effects of welding (binary) and PM(2.5) (continuous) exposure on each blood marker, adjusting for baseline blood marker concentration, smoking, age and time of day. Welding and PM(2.5) exposure were significantly associated with a decrease in sVCAM-1 in the afternoon and the following morning and an increase in vWF in the afternoon. The data suggest that welding and short-term occupational exposure to PM(2.5) may acutely affect the endothelial component of vascular function.

Estimation of Particulate Mass and Manganese Exposure Levels among Welders

PubMed Central

Hobson, Angela; Seixas, Noah; Sterling, David; Racette, Brad A.

2011-01-01

Background: Welders are frequently exposed to Manganese (Mn), which may increase the risk of neurological impairment. Historical exposure estimates for welding-exposed workers are needed for epidemiological studies evaluating the relationship between welding and neurological or other health outcomes. The objective of this study was to develop and validate a multivariate model to estimate quantitative levels of welding fume exposures based on welding particulate mass and Mn concentrations reported in the published literature. Methods: Articles that described welding particulate and Mn exposures during field welding activities were identified through a comprehensive literature search. Summary measures of exposure and related determinants such as year of sampling, welding process performed, type of ventilation used, degree of enclosure, base metal, and location of sampling filter were extracted from each article. The natural log of the reported arithmetic mean exposure level was used as the dependent variable in model building, while the independent variables included the exposure determinants. Cross-validation was performed to aid in model selection and to evaluate the generalizability of the models. Results: A total of 33 particulate and 27 Mn means were included in the regression analysis. The final model explained 76% of the variability in the mean exposures and included welding process and degree of enclosure as predictors. There was very little change in the explained variability and root mean squared error between the final model and its cross-validation model indicating the final model is robust given the available data. Conclusions: This model may be improved with more detailed exposure determinants; however, the relatively large amount of variance explained by the final model along with the positive generalizability results of the cross-validation increases the confidence that the estimates derived from this model can be used for estimating welder exposures

Reduction in welding fume and metal exposure of stainless steel welders: an example from the WELDOX study.

PubMed

Lehnert, Martin; Weiss, Tobias; Pesch, Beate; Lotz, Anne; Zilch-Schöneweis, Sandra; Heinze, Evelyn; Van Gelder, Rainer; Hahn, Jens-Uwe; Brüning, Thomas

2014-07-01

In a plant where flux-cored arc welding was applied to stainless steel, we investigated changes in airborne and internal metal exposure following improvements of exhaust ventilation and respiratory protection. Twelve welders were examined at a time in 2008 and in 2011 after improving health protection. Seven welders were enrolled in both surveys. Exposure measurement was performed by personal sampling of respirable welding fume inside the welding helmets during one work shift. Urine and blood samples were taken after the shift. Chromium (Cr), nickel (Ni), and manganese (Mn) were determined in air and biological samples. The geometric mean of respirable particles could be reduced from 4.1 mg/m(3) in 2008-0.5 mg/m(3) in 2011. Exposure to airborne metal compounds was also strongly reduced (Mn: 399 vs. 6.8 μg/m(3); Cr: 187 vs. 6.3 μg/m(3); Ni: 76 vs. 2.8 μg/m(3)), with the most striking reduction inside helmets with purified air supply. Area sampling revealed several concentrations above established or proposed exposure limits. Urinary metal concentrations were also reduced, but to a lesser extent (Cr: 14.8 vs. 4.5 μg/L; Ni: 7.9 vs. 3.1 μg/L). Although biologically regulated, the mean Mn concentration in blood declined from 12.8 to 8.9 μg/L. This intervention study demonstrated a distinct reduction in the exposure of welders using improved exhaust ventilation and welding helmets with purified air supply in the daily routine. Data from area sampling and biomonitoring indicated that the area background level may add considerably to the internal exposure.

Management of a Major Downsizing at a Naval Shipyard. Research Report No. 52.

ERIC Educational Resources Information Center

Aguilar, M.; And Others

Between 1987 and 1990, the work force of the Mare Island Naval Shipyard (Vallejo, California) was reduced from 10,000 to 7,200 employees. The management strategy for moving through this period included the following: (1) using a flexible work force; (2) using Computer-Assisted Manpower Analyses System (CAMAS) flow models to ensure that management…

Neuropsychological Effects of Low-Level Manganese Exposure in Welders

PubMed Central

Laohaudomchok, Wisanti; Lin, Xihong; Herrick, Robert F.; Fang, Shona C.; Cavallari, Jennifer M.; Shrairman, Ruth; Landau, Alexander; Christiani, David C.; Weisskopf, Marc G.

2011-01-01

While the neuropsychological effects of high manganese (Mn) exposure in occupational settings are well known, the effects of lower levels of exposure are less understood. In this study, we investigated the neuropsychological effects of lower level occupational Mn exposure in 46 male welders (mean age = 37.4, sd = 11.7 years). Each welders’ cumulative Mn exposure indices (Mn-CEI) for the past 12 months and total work history Mn exposure were constructed based on air Mn measurements and work histories. The association between these exposure indices and performance on cognitive, motor control, and psychological tests was examined. In addition, among a subset of welders (n=24) who completed the tests both before and after a work shift, we examined the association between cross-shift Mn exposure assessed from personal monitoring and acute changes in test scores. Mn exposures in this study (median = 12.9 μg/m3) were much lower, as compared to those observed in other similar studies. Increasing total Mn-CEI was significantly associated with slower reaction time on the continuous performance test (CPT; p<0.01), as well as worse mood for several scales on the Profile of Mood States (POMS; confused, tired, and a composite of tired and energetic, all p≤0.03). Increasing Mn-CEI over the previous 12 months was significantly associated with worse mood on the sad, tense, and confused POMS scales (all p≤0.03) and the association with worse CPT performance approached significance (p=0.10). Higher Mn exposure over the course of a workday was associated with worse performance on the CPT test across the day (p=0.06) as well as declines in fine motor control over the work-shift (p=0.04), adjusting for age and time between the 2 tests. Our study suggests that even at relatively low Mn exposure levels neuropsychological effects may manifest particularly with respect to attention, mood, and fine motor control. PMID:21192973

Oxidatively damaged guanosine in white blood cells and in urine of welders: associations with exposure to welding fumes and body iron stores.

PubMed

Pesch, Beate; Lotz, Anne; Koch, Holger M; Marczynski, Boleslaw; Casjens, Swaantje; Käfferlein, Heiko U; Welge, Peter; Lehnert, Martin; Heinze, Evelyn; Van Gelder, Rainer; Hahn, Jens-Uwe; Behrens, Thomas; Raulf, Monika; Hartwig, Andrea; Weiss, Tobias; Brüning, Thomas

2015-08-01

The International Agency for Research on Cancer considers the carcinogenicity of welding fume of priority for re-evaluation. Genotoxic effects in experimental animals are still inconclusive. Here, we investigated the association of personal exposure to metals in respirable welding fumes during a working shift with oxidatively damaged guanosine in DNA of white blood cells (WBC) and in postshift urine samples from 238 welders. Medians of 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodGuo) were 2.35/10(6) dGuo in DNA of WBC and 4.33 µg/g creatinine in urine. The median of 8-oxo-7,8-dihydroguanosine (8-oxoGuo) was 7.03 µg/g creatinine in urine. The extent of both urinary parameters was higher in welders applying techniques with high particle emission rates to stainless steel than in tungsten inert gas welders (8-oxodGuo: 9.96 vs. 4.49 µg/L, 8-oxoGuo: 15.7 vs. 7.7 µg/L), but this apparent difference diminished after creatinine adjustment. We applied random intercept models to estimate the influence of airborne and systemic exposure to metals on oxidatively damaged guanosine in WBC and urine together with covariates. We observed a highly significant nonlinear association of urinary 8-oxoGuo with serum ferritin (P < 0.0001) and higher 8-oxoGuo concentrations for respirable iron >1,000 µg/m(3) compared to ≤57 µg/m(3). Similar effects were found for manganese. Airborne chromium but not nickel was associated with all oxidatively modified guanosine measures, whereas urinary chromium as well as nickel showed associations with urinary modified guanosines. In summary, oxidatively damaged urinary guanosine was associated with airborne and systemic exposure to metals in welders and showed a strong relation to body iron stores.

Sickness absence in the private sector of Greece: comparing shipyard industry and national insurance data.

PubMed

Alexopoulos, Evangelos C; Merekoulias, Georgios; Tanagra, Dimitra; Konstantinou, Eleni C; Mikelatou, Efi; Jelastopulu, Eleni

2012-04-01

Approximately 3% of employees are absent from work due to illness daily in Europe, while in some countries sickness absence exceeds 20 days per year. Based on a limited body of reliable studies, Greek employees in the private sector seem to be absent far less frequently (<5 days/year) compared to most of the industrialized world. The aim of this study was to estimate the levels of sickness absence in the private sector in Greece, using shipyard and national insurance data. Detailed data on absenteeism of employees in a large shipyard company during the period 1999-2006 were utilized. National data on compensated days due to sickness absence concerning all employees (around 2 million) insured by the Social Insurance Institute (IKA, the largest insurance scheme in Greece) were retrieved from the Institute's annual statistical reports for the period 1987-2006. Sick-leave days per employee and sick-leave rate (%) were calculated, among other indicators. In the shipyard cohort, the employment time loss due to sick leave was 1%. The mean number of sick-leave days per employee in shipyards ranged between 4.6 and 8.7 and sick-leave rate (sickness absenteeism rate) varied among 2% and 3.7%. The corresponding indicators for IKA were estimated between 5 and 6.3 sick-leave days per insured employee (median 5.8), and 2.14-2.72% (median 2.49%), respectively. Short sick-leave spells (<4 days) may account at least for the 25% of the total number of sick-leave days, currently not recorded in national statistics. The level of sickness absence in the private sector in Greece was found to be higher than the suggested by previous reports and international comparative studies, but still remains one of the lowest in the industrialized world. In the 20-years national data, the results also showed a 7-year wave in sickness absence indexes (a decrease during the period 1991-1997 and an increase in 1998-2004) combined with a small yet significant decline as a general trend. These

Sickness Absence in the Private Sector of Greece: Comparing Shipyard Industry and National Insurance Data

PubMed Central

Alexopoulos, Evangelos C.; Merekoulias, Georgios; Tanagra, Dimitra; Konstantinou, Eleni C.; Mikelatou, Efi; Jelastopulu, Eleni

2012-01-01

Approximately 3% of employees are absent from work due to illness daily in Europe, while in some countries sickness absence exceeds 20 days per year. Based on a limited body of reliable studies, Greek employees in the private sector seem to be absent far less frequently (<5 days/year) compared to most of the industrialized world. The aim of this study was to estimate the levels of sickness absence in the private sector in Greece, using shipyard and national insurance data. Detailed data on absenteeism of employees in a large shipyard company during the period 1999–2006 were utilized. National data on compensated days due to sickness absence concerning all employees (around 2 million) insured by the Social Insurance Institute (IKA, the largest insurance scheme in Greece) were retrieved from the Institute’s annual statistical reports for the period 1987–2006. Sick-leave days per employee and sick-leave rate (%) were calculated, among other indicators. In the shipyard cohort, the employment time loss due to sick leave was 1%. The mean number of sick-leave days per employee in shipyards ranged between 4.6 and 8.7 and sick-leave rate (sickness absenteeism rate) varied among 2% and 3.7%. The corresponding indicators for IKA were estimated between 5 and 6.3 sick-leave days per insured employee (median 5.8), and 2.14–2.72% (median 2.49%), respectively. Short sick-leave spells (<4 days) may account at least for the 25% of the total number of sick-leave days, currently not recorded in national statistics. The level of sickness absence in the private sector in Greece was found to be higher than the suggested by previous reports and international comparative studies, but still remains one of the lowest in the industrialized world. In the 20-years national data, the results also showed a 7-year wave in sickness absence indexes (a decrease during the period 1991–1997 and an increase in 1998–2004) combined with a small yet significant decline as a general trend. These

Outbreak of invasive pneumococcal disease at a Belfast shipyard in men exposed to welding fumes, Northern Ireland, April-May 2015: preliminary report.

PubMed

Patterson, L; Irvine, N; Wilson, A; Doherty, L; Loughrey, A; Jessop, L

2015-05-28

We report an outbreak of four confirmed cases of invasive pneumococcal disease (IPD) in individuals occupationally exposed to welding fumes, at a Belfast shipyard (Northern Ireland). All cases were hospitalised. A high-risk sub-group of 679 workers has been targeted for antibiotic prophylaxis and pneumococcal vaccination. Physicians and public health institutions outside Northern Ireland should be alert to individuals presenting with pneumonia or IPD and recent links to the shipyard, to facilitate early assessment and treatment.

76 FR 45738 - Regulated Navigation Area; Pacific Sound Resources and Lockheed Shipyard EPA Superfund Cleanup...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-01

... Shipyard superfund cleanup remediation efforts. This RNA would prohibit activities that would disturb the... sediment caps installed in the designated regulated navigation area, pursuant to the remediation efforts of... persons engaged in activities associated with remediation efforts in the superfund sites, provided that...

Metabolomic characterization of laborers exposed to welding fumes.

PubMed

Wang, Kuo-Ching; Kuo, Ching-Hua; Tian, Tze-Feng; Tsai, Mong-Hsun; Chiung, Yin-Mei; Hsiech, Chun-Ming; Tsai, Sung-Jeng; Wang, San-Yuan; Tsai, Dong-Ming; Huang, Chiang-Ching; Tseng, Y Jane

2012-03-19

The complex composition of welding fumes, multiplicity of molecular targets, diverse cellular effects, and lifestyles associated with laborers vastly complicate the assessment of welding fume exposure. The urinary metabolomic profiles of 35 male welders and 16 male office workers at a Taiwanese shipyard were characterized via (1)H NMR spectroscopy and pattern recognition methods. Blood samples for the same 51 individuals were also collected, and the expression levels of the cytokines and other inflammatory markers were examined. This study dichotomized the welding exposure variable into high (welders) versus low (office workers) exposures to examine the differences of continuous outcome markers-metabolites and inflammatory markers-between the two groups. Fume particle assessments showed that welders were exposed to different concentrations of chromium, nickel, and manganese particles. Multivariate statistical analysis of urinary metabolomic patterns showed higher levels of glycine, taurine, betaine/TMAO, serine, S-sulfocysteine, hippurate, gluconate, creatinine, and acetone and lower levels of creatine among welders, while only TNF-α was significantly associated with welding fume exposure among all cytokines and other inflammatory markers measured. Of the identified metabolites, the higher levels of glycine, taurine, and betaine among welders were suspected to play some roles in modulating inflammatory and oxidative tissue injury processes. In this metabolomics experiment, we also discovered that the association of the identified metabolites with welding exposure was confounded by smoking, but not with drinking, which is a finding consistent with known modified response of inflammatory markers among smokers. Our results correspond with prior studies that utilized nonmetabolomic analytical techniques and suggest that the metabolomic profiling is an efficient method to characterize the overall effect of welding fume exposure and other confounders. © 2012 American

Overview of Shipyard coast line with Piers G1, G2, G3, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Overview of Shipyard coast line with Piers G-1, G-2, G-3, G-4, and G-5 in view, view facing east-southeast - U.S. Naval Base, Pearl Harbor, Pier & Quay Walls, Entrance to Dry Dock No. 2 & Repair Wharfs, east & west sides of Dry Dock No. 2 & west side of Dry Dock No. 3, Pearl City, Honolulu County, HI

Comparison of cancer incidence between production and office workers at a shipyard in Korea: a retrospective cohort study from 1992 to 2005.

PubMed

Jeong, Kyoung-Sook; Kim, Yangho; Kim, Moon-Chan; Yoo, Cheol-In

2011-09-01

Cancer is a major concern in shipbuilding. Since 1970s, shipbuilding and repair has been a strategic industry in Korea, which has become currently the world's largest shipbuilding country. The aim of this study is to investigate the cancer incidence in shipyard workers in Korea. The cohort comprised 30,288 male employees (20,647 production workers and 9,641 office workers) ever employed between 1992 and 2005 in a shipyard in Korea. The authors compared the cancer incidence between the groups using the participants' hospital medical records and data received from Korea National Cancer Incidence Database and Korean National Statistical Office. The total number of cancers was 135 among office workers and 519 among production workers in the shipyard. The age-standardized cancer rates among office and production workers were 136.2 and 179.7 per 100,000 person-years, respectively. The standardized rate ratios for stomach cancer, liver cancer, and lung cancer in production workers compared with office workers were 1.67 (95% CI: 1.12-2.49), 2.13 (95% CI: 1.37-3.36), and 3.71 (95% CI: 1.68-8.19), respectively. The observed increase in stomach, liver, and lung cancers among production workers suggests that some occupational factors in the shipyard might have contributed to the increased cancer risk. Further study is needed to clarify the risk of those cancers and to identify the specific factors involved. Copyright © 2011 Wiley-Liss, Inc.

[Occupational exposure of welders to ultraviolet and "blue light" radiation emitted during TIG and MMA welding based on field measurements].

PubMed

Wolska, Agnieszka

2013-01-01

The aim of the study was to present the results of welders' occupational exposure to "blue light" and UV radiation carried out at industrial workstations during TIG and MMA welding. Measurements were performed at 13 workstations (TIG welding: 6; MMA welding: 7), at which different welding parameters and materials were used. The radiation level was measured using a wide-range radiometer and a set of detectors, whose spectral responses were adequately fit to particular hazard under study. The measurement points corresponded with the location of eye and hand. The highest values of eye irradiance were found for aluminum TIG welding. Effective irradiance of actinic UV was within the range E(s) = 7.79-37.6 W/m2; UVA total irradiance, E(UVA) = 18-53.1 W/m2 and effective blue-light irradiance E(B) = 35-67 W/m2. The maximum allowance time ranged from 1.7 to 75 s, which means that in some cases even unintentional very short eye exposure can exceed MPE. The influence of welded material and the type of electrode coating on the measured radiation level were evidenced. The exceeded value of MPE for photochemical hazard arising for the eyes and skin was found at all measured workstations. Welders should use appropriately the eye and face protective equipment and avoid direct staring at welding arc when starting an arc-welding operation. Besides, the lack of head and neck skin protection can induce acute and chronic harmful health effects. Therefore, an appropriate wear of personal protective equipment is essential for welders' health.

Corporate Repair Philosophy and Measuring for Continuous Improvement at Philadelphia Naval Shipyard

DTIC Science & Technology

1992-09-01

processes and products of Improvement Program (NIIP) vegan a series Wavy depot-level activities, of discussions which centered on the development of a...alteration project have been made at the and workforce. Prior to entering the shipyard. These changes and their effect planning stages fortheUSS...the in CKO at 80% is slightly less for CV-64 "rippling effects " of a DSR submittal when compared to CV-63 at its 80% point such as work stoppage

Process-dependent risk of delayed health effects for welders.

PubMed Central

Stern, R M

1981-01-01

In most industrialized countries large numbers of workers are exposed to welding fumes. Although the general pattern of welders' health may not significantly differ from that of workers in other dusty industrial occupations which demonstrate elevated incidence of respiratory tract diseases with long latency periods, the extremely wide range of substances at potentially high concentrations produced by various welding technologies may give rise to undetected process-specific high-risk working conditions: ("hot spots"). The origin, prevalence and range of magnitude of such hot spots, especially for cancer of the respiratory tract, is discussed, with emphasis placed on the assessment of risk resulting from exposure to Cr(VI) and Ni accompanying the use of various technologies for the welding of stainless and high alloy steels. The wide variation of health effects found within the industry, however, indicates the need for a standard protocol for future epidemiological studies, as well as for the development of suitable methodologies for experimental risk assessment. PMID:7333241

[Assessment of occupational exposure of welders based on determination of fumes and their components produced during stainless steel welding].

PubMed

Stanisławska, Magdalena; Janasik, Beata; Trzcinka-Ochocka, Małgorzata

2011-01-01

Occupational exposure to welding fumes is a known health hazard. The aim of this study was to determine concentrations of welding fumes components such as: iron, manganese, nickel and chromium (including chromium speciation) to assess exposure of stainless steel welders. The survey covered 14 workers of two metallurgic plants engaged in welding stainless steel (18% Cr and 8% Ni) by different techniques: manual metal arc (MMA), metal inert gas (MIG) and tungsten inert gas (TIG). Personal air samples were collected in the welders' breathing zone over a period of about 6-7 h (dust was collected on a membrane and glass filter) to determine time weighted average (TWA) concentration of welding fumes and its components. The concentrations of welding fumes (total particulate) were determined with use of the gravimetric method. Concentrations and welding fume components, such as: iron, manganese, nickel and chromium were determined by ICP-MS technique. The total hexavalent chromium was analyzed by applying the spectrophotometry method according to NIOSH. The water-soluble chromium species were analyzed by HPLC-ICP-MS. Time weighted average concentrations of the welding fumes and its components at the worker's breathing zone were (mg/m3): dust, 0.14-10.7; iron, 0.004-2.9; manganese, 0.001-1.12; nickel, < 0.001-0.2; and chromium <0.002-0.85 (mainly Cr(III) and insoluble Cr(VI)). The maximum admissible limits for workplace pollutants (TLV-TWA) were exceeded for manganese and for insoluble chromium Cr (VI). For Cr (III) the limit was exceeded in individual cases. The assessment of the workers' occupational exposure, based on the determined time weighted average (TWA) of fumes and their components, shows that the stainless steel welders worked in conditions harmful to their health owing to the significantly exceeded maximum admissible limits for manganese and the exceeded TLV value for insoluble chromium (VI).

The potential hazardous effect of exposure to iron dust in Egyptian smoking and nonsmoking welders.

PubMed

Gobba, Naglaa Abd El Khalik; Hussein Ali, Abdelmaksoud; El Sharawy, Dalia E; Hussein, Mohammed Abdalla

2018-05-04

Exposure to iron dust and welding fumes is widespread and may increase the risk of lung inflammation. The aim of this study was to identify associations between exposure to iron/welding fumes and the levels of inflammatory parameters and allergic mediators among 120 Egyptian men. Forty nonsmoking and 40 smoking Egyptian welders as well as 40 healthy volunteers who were never exposed to welding fumes and were nonsmoking were enrolled in the study. Peak expiratory flow rates (PEFR) assessed at the end of the shift of work on working days revealed an impairment in lung function, with the smoking workers showing the worse results, followed by nonsmoking workers, as compared to healthy volunteers. Moreover, the results of the present study showed a significant increase in serum iron and immunoglobulin E, as well as plasma thiobarbaturic acid reactive substances, C-reactive protein, tumor necrosis factor-alpha, haptoglobin, interleukin-2, interleukin-6 and interleukin-23 histamine, lactate dehydrogenase isoenzyme-3, and calcitonin. In addition, the results revealed significant decrease in plasma α-1-antitrypsin and serum transferrin, as well as blood activities of antioxidant enzymes: catalase, superoxide dismutase, glutathione peroxidase, and glutathione reductase (as compared with control group). However, there was a nonsignificant change in arginase and α-L-fucosidase in smoking and nonsmoking welders exposed to iron dust and welding fumes. In conclusion, occupational exposure to iron dust and welding fumes increases lung inflammation risk among Egyptian blacksmith workers, a condition that worsens with smoking.

Longitudinal study on potential neurotoxic effects of aluminium: II. Assessment of exposure and neurobehavioral performance of Al welders in the automobile industry over 4 years.

PubMed

Kiesswetter, Ernst; Schäper, M; Buchta, M; Schaller, K H; Rossbach, B; Kraus, T; Letzel, S

2009-11-01

This is the second of two parallel longitudinal studies investigating Al exposure and neurobehavioral health of Al welders over 4 years. While the first published study in the trail and truck construction industry examined the neurobehavioral development of Al welders from age 41-45 in the group mean (Kiesswetter et al. in Int Arch Occup Environ Health 81:41-67, 2007), the present study in the automobile industry followed the development from 35 to 39. Although no conspicuous neurobehavioral developments were detected in the first study, which furthermore exhibited the higher exposure, it cannot be excluded that exposure effects appear in earlier life and exposure stages. The longitudinal study is based on a repeated measurement design comprising 4 years with three measurements in 2 years intervals. 92 male Al welders in the automobile industry were compared with 50 non-exposed construction workers of the same industry and of similar age. The repeated measurements included total dust in air, and Al pre- and post-shift plasma and urine samples. Neurobehavioral methods comprised symptoms, verbal intelligence, logic thinking, psychomotor behavior, memory, and attention. The computer aided tests came from the Motor Performance Series and the European Neurobehavioral Evaluation System. The courses of neurobehavioral changes were analyzed with multivariate covariance-analytical methods considering the covariates age, indicators of 'a priori' intelligence differences (education or markers of 'premorbid' intelligence), and alcohol consumption (carbohydrate-deficient transferrin in plasma). Additionally, the interrelationship, reliability and validity of biomonitoring measures were examined. The mean environmental dust load during welding, 0.5-0.8 mg/m(3), and the mean internal load of the welders (pre-shift: 23-43 microg Al/g creatinine in urine; 5-9 microg Al/l plasma) were significantly lower than in the parallel study. Under low exposure, the stability of biomonitoring

Chemical-Induced Hearing Loss in Shipyard Workers.

PubMed

Schaal, Nicholas Cody; Slagley, Jeremy M; Richburg, Cynthia McCormick; Zreiqat, Majed M; Paschold, Helmut W

2018-01-01

The aim of this study was to determine the effect of lead, cadmium, arsenic, toluene, and xylene exposure on hearing compared with noise exposures alone. Personnel at a shipyard (n = 1266) were divided into four exposure groups on the basis of concentrations: low metals/low solvents/high noise (reference group), high metals/high solvents/low noise, high metals/low solvents/high noise, and high metals/high solvents/high noise. Hearing changes occurring from the years 2004 to 2015 were analyzed. Hearing changes were significantly worse at 1000 Hz (P = 0.007), averaged across 2000 to 4000 Hz (P = 0.014), and averaged across 500 to 6000 Hz (P = 0.014) for the high metals/high solvent/high noise group compared with the low metals/low solvents/high noise only reference group. Simultaneous exposures classified as high for metals/solvents/noise appear to damage hearing more than exposure to noise alone. Hearing conservation programs should take into consideration combined exposures to metals, solvents, and noise, not simply exposure to noise.

Electromyographic activity of the erector spinae: The short-effect of one workday for welders with nonspecific chronic low back pain, an observational study.

PubMed

Mendes, André Augusto M T; de Freitas, Sandra Maria Sbeghen Ferreira; Amorin, César Ferreira; Cabral, Cristina Maria Nunes; Padula, Rosimeire Simprini

2018-02-06

This study aimed to evaluate the effect of one workday on pain and perceived exertion, muscular strength, and electromyographic activity of the erector spinae muscles in welders with and without low back pain. This is an observational cohort study. Twenty-two welders, metallurgical shipbuilding, were equally divided into 2 groups: low back pain and no low back pain. Pain and perceived exertion. Muscular strength by maximal voluntary contractions and electromyographic activity of right and left erector spinae muscles during maximal voluntary contractions and in the 3 welding positions for 2 periods of the workday (in the morning and at the end of the workday). At the end of workday, the pain increased significantly for the low back pain group (t(22) = 2.448; P= 0.023). The perceived exertion also increased significantly for both groups at the end of workday groups (F(1,22) = 8.570, P= 0.000) and periods (F(1,22) = 8.142, P= 0.000). There were no significant differences between groups and workday periods for muscular strength and electromyographic activity during maximal voluntary contractions of the erector spinae. There was no significance difference for electromyographic activity between groups and workday period and in the 3 welding positions. Although the pain and perceived exertion increased at the end of the workday, these results did not interfere in muscular strength and electromyographic activity of right and left erector spinae muscles. Thus, we can conclude that welders with chronic low back pain had a good physical capacity (muscular strength) and that muscle performance was maintained.

Inverse association between toenail arsenic and body mass index in a population of welders.

PubMed

Grashow, Rachel; Zhang, Jinming; Fang, Shona C; Weisskopf, Marc G; Christiani, David C; Kile, Molly L; Cavallari, Jennifer M

2014-05-01

Recent data show that arsenic may play a role in obesity-related diseases. However, urinary arsenic studies report an inverse association between arsenic level and body mass index (BMI). We explored whether toenail arsenic, a long-term exposure measure, was associated with BMI in 74 welders with known arsenic exposure. BMI showed significant inverse associations with toenail arsenic (p=0.01), which persisted in models adjusted for demographics, diet and work history. It is unclear whether low arsenic biomarker concentrations in high BMI subjects truly reflect lower exposures, or instead reflect internal or metabolic changes that alter arsenic metabolism and tissue deposition. Copyright © 2014 Elsevier Inc. All rights reserved.

A Validation Method to Determine Missing Years of Birth in a Cohort Study of Shipyard Workers Using Social Security Number.

PubMed

Cabasag, Citadel J; Ziogas, Argyrios; Shehata, Merna; Anton-Culver, Hoda

2016-06-01

The objective of the study is to evaluate the generalizability and feasibility of a prediction method developed by Block et al (1983) to estimate missing age of workers by using their Social Security Numbers (SSNs). Our study used a retrospective occupational cohort of about 15,000 workers from the Long Beach Naval Shipyard (1978 to 1985). Our results showed an 89.2% agreement (P < 0.0001) between the predicted and observed years of birth using Block's method. The correlation increased to 93.1% (P < 0.0001) after our modifications by removing workers with SSNs issued in U.S. territories. The method performed better in shipyard workers who obtained their SSNs after 1950. Although the method is useful in imputing missing age, the accuracy is dependent on the year, age, and location of SSN issuance.

Ancient Shipyard on Turkey's Dana Island: its 3d Modelling with Photogrammetry and Computer Graphics

NASA Astrophysics Data System (ADS)

Denker, A.; Oniz, H.

2018-05-01

Although a small island 2 km off the southern coast of Turkey, Dana Island offers a rich history which is likely to shed light upon the Dark Ages. Starting from 2015 our archaeological team discovered through continuing coastal and underwater excavations 274 shipsheds/slipways there. This discovery places Dana Island among the biggest shipyards of antiquity. The slipways varied in dimensions suitable for vessels of different sizes from small boats to large warships. Historical sources suggest that the name of the island may stem from Yadnana, Yadana or Adana which was mentioned in an Assyrian tablet of the 8th century BC, as an island in the vicinity of Cyprus. Archaeological evidence exists that shows Dana Island had played a significant role in seamanship activities in Levant starting from Neolithic times. A substantial part of the naval campaigns must have involved Dana Island which used be the biggest shipyard/naval base of the Eastern Mediterranean. A 3D model of the island has been made by using photogrammetry and computer graphics methods and simulations were executed to check the hypotheses related to the involvement of Dana Island in the major sea battles of antiquity, such as Sea Battle of Lade in 495 BC.

A Group Wage Incentive System for Production Workers at Pearl Harbor Naval Shipyard: Test and Evaluation

DTIC Science & Technology

1985-09-01

assume they will result in a sweatshop atmosphere. Workers may have fears that management will tighten standards when performance improves or...the shop’s performance can have a major impact on overall shipyard performance. In addition, the potential for accurate performance measurement was... impact of this experimental productivity improvement technique on participants’ job attitudes is supported in the literature. White et al. (in

[Determination of fumes and their elements from flux cored arc welding].

PubMed

Matczak, Wanda; Przybylska-Stanisławska, Magdalena

2004-01-01

The aim of this work was to assay the concentration levels and composition of welding fumes, released during flux cored arc welding, to assess exposure of welders. Concentrations and welding fume components, such as iron, manganese, chromium (including the soluble and chromium VI), nickel, copper, calcium, aluminium, barium, and fluorides (including hydrogen fluoride) were determined in the air of six industrial plants (shipyards, mechanical engineering plants and a power station) at the breathing zones of the welders who used 10 types of wires during flux cored arc welding. The following determination methods were used: gravimetry (fumes), AAS (metals), and spectrophotometry (chromium VI, fluorides--including hydrogen fluoride). The results made it possible to determine the relationship between concentrations of welding fume and its elements, and to assess worker's exposure. Time weighted average concentrations of the welding fumes and its elements at the worker's breathing zone were: mg/m3: dust 0.2-24.3; Fe 0.2-6.7; Mn 0.01-1.8; Cr 0.004-0.5 (mainly Cr III); Ca 0.004-2.5; Ni < or = 0.004; Cu < 0.002-0.05; Al < 0.14-0.4; Ba < 0.14; F- 0.07-0.43. The welders using some types of flux cored welding wires worked in conditions harmful to their health owing to the considerably exceeded TLV value for fume and MAC values for manganese, and occasional slightly excessive MAC values for calcium and iron.

Mortality from leukaemia and cancer in shipyard nuclear workers.

PubMed

Najarian, T; Colton, T

1978-05-13

A review of death certificates in New Hampshire, Maine, and Massachusetts for 1959-77 yielded a total of 1722 deaths among former workers at the Portsmouth Naval Shipyard where nuclear submarines are repaired and refuelled. Next of kin were contacted for 592. All deaths under age 80 were classified as being in former nuclear or non-nuclear workers depending on information supplied by next of kin. With U.S. age-specific proportional cancer mortality for White males as a standard, the observed/expected ratio of leukaemia deaths was 5.62 (6 observed, 1.1 expected) among the 146 former nuclear workers. For all cancer deaths, this ratio was 1.78. Among non-nuclear workers there was no statistically significant increase in proportional mortality from either leukaemia or from all cancers. The excess proportional leukaemia and cancer mortality among nuclear workers exceeds predictions based on previous data of radiation effects in man.

Radiological survey of the Norfolk Naval Station, the Norfolk Naval Shipyard, and Newport News Shipbuilding. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sensintaffar, E.L.; Blanchard, R.L.

1988-09-01

The report presents results of the survey conducted by EERF personnel to assess levels of environmental radioactivity resulting from maintenance and operation of nuclear-powered warships at the Norfolk Naval Station, Norfolk Naval Shipyard and Newport News Shipbuilding. The purpose of the survey was to determine if activities related to nuclear-powered warships resulted in release of radionuclides which may contribute to significant population exposure or contamination of the environment.

A Fog Computing and Cloudlet Based Augmented Reality System for the Industry 4.0 Shipyard.

PubMed

Fernández-Caramés, Tiago M; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Vilar-Montesinos, Miguel

2018-06-02

Augmented Reality (AR) is one of the key technologies pointed out by Industry 4.0 as a tool for enhancing the next generation of automated and computerized factories. AR can also help shipbuilding operators, since they usually need to interact with information (e.g., product datasheets, instructions, maintenance procedures, quality control forms) that could be handled easily and more efficiently through AR devices. This is the reason why Navantia, one of the 10 largest shipbuilders in the world, is studying the application of AR (among other technologies) in different shipyard environments in a project called "Shipyard 4.0". This article presents Navantia's industrial AR (IAR) architecture, which is based on cloudlets and on the fog computing paradigm. Both technologies are ideal for supporting physically-distributed, low-latency and QoS-aware applications that decrease the network traffic and the computational load of traditional cloud computing systems. The proposed IAR communications architecture is evaluated in real-world scenarios with payload sizes according to demanding Microsoft HoloLens applications and when using a cloud, a cloudlet and a fog computing system. The results show that, in terms of response delay, the fog computing system is the fastest when transferring small payloads (less than 128 KB), while for larger file sizes, the cloudlet solution is faster than the others. Moreover, under high loads (with many concurrent IAR clients), the cloudlet in some cases is more than four times faster than the fog computing system in terms of response delay.

Case-control study of lung cancer in civilian employees at the Portsmouth Naval Shipyard, Kittery, Maine.

PubMed

Rinsky, R A; Melius, J M; Hornung, R W; Zumwalde, R D; Waxweiler, R J; Landrigan, P J; Bierbaum, P J; Murray, W E

1988-01-01

Case-control analysis of deaths due to lung cancer (International Classification of Diseases, Eighth Revision, code 162) among persons who worked at the Portsmouth Naval Shipyard, Kittery, Maine, between 1952 and 1977 found elevated odds ratios for exposures to ionizing radiation, asbestos, and welding byproducts. The radiation-related excess was statistically significant in persons with cumulative lifetime exposures of 1.0-4.999 rem. When asbestos and welding histories were combined into a single risk factor, odds ratios for the combined exposure were significantly elevated for two of three duration-of-exposure categories examined. Further analysis of data on radiation exposure, controlling for exposures to asbestos and welding, found reductions in initial estimates of radiation risk at all levels of radiation exposure. This reduction suggests that radiation workers were more heavily exposed to asbestos and/or welding fumes than were other workers and that those exposures confounded the observed association between radiation and lung cancer. Analysis of mortality by time since first exposure to radiation revealed no pattern of progressive increase as latency increased. By contrast, odds ratios for asbestos/welding increased with latency. Data on cigarette smoking and socioeconomic status were not available. The results of this study do not preclude a possible association between radiation exposure at the Portsmouth Naval Shipyard and excess mortality from lung cancer. However, they provide no evidence in support of such a relation.

Prolactin levels in manganese-exposed male welders.

PubMed

Tutkun, Engin; Abuşoğlu, Sedat; Yılmaz, Hinç; Gündüzöz, Meşide; Gıynas, Nilgün; Bal, Ceylan Demir; Ünlü, Ali

2014-12-01

Early studies on manganese (Mn) exposure have demonstrated that this transition metal affects dopamine neurotransmission. Dopamine serves as a tonic inhibitor of prolactin release in the anterior hypophysis. Our aim was to determine the relation between serum prolactin levels and manganese-exposure. Whole blood was collected from 95 non-exposed control subjects and 179 manganese-exposed male welders. Whole blood manganese was analyzed by Inductively Coupled Plasma--Mass Spectrometer on Agilent 7700 (Agilent Technologies, USA). Serum prolactin levels (PRL), aspartate transaminase (AST), alanine transaminase (ALT), urea, creatinine, soduim (Na), potassium (K) were analyzed by immunological and spectrophotometric methods on Roche E170 Modular System (Roche Diagnostics, Mannheim, Germany). The mean ages for control and manganese-exposed group were 40.5 ± 7.8 and 39.5 ± 8.7, respectively (p = 0.258). The mean working period (years) for control and manganese-exposed group were 17.4 ± 9.8 and 18.2 ± 7.7 years, respectively (p = 0.581). Serum AST and potassium levels were significantly higher in control group than manganese-exposed group (p = 0.002 and p = 0.048, respectively) and body-mass index (BMI) was significantly lower in control group than manganese-exposed group (p = 0.033). There was a significantly positive correlation between whole blood manganese levels and serum prolactin (r = 0.860, p < 0.001). Serum ALT levels were positively correlated with serum AST, urea and sodium (r = 0.315, p < 0.001; r = 0.121, p = 0.046; r = 0.130, p = 0.031). Serum prolactin level is a diagnostic marker for determining the effect of manganese-exposure.

The characteristics of vibrotactile perception threshold among shipyard workers in a tropical environment.

PubMed

Tamrin, Shamsul Bahri Mohd; Jamalohdin, Mohd Nazri; Ng, Yee Guan; Maeda, Setsuo; Ali, Nurul Asyiqin Mohd

2012-01-01

The objectives of this study are to determine the prevalence of hand-arm vibration syndrome (HAVS) and the characteristics of the vibrotactile perception threshold (VPT) among users of hand-held vibrating tools working in a tropical environment. A cross sectional study was done among 47 shipyard workers using instruments and a questionnaire to determine HAVS related symptoms. The vibration acceleration magnitude was determined using a Human Vibration Meter (Maestro). A P8 Pallesthesiometer (EMSON-MAT, Poland) was used to determine the VPT of index and little finger at frequencies of 31.5 Hz and 125 Hz. The mean reference threshold shift was determined from the reference threshold shift derived from the VPT value. The results show a moderate prevalence of HAVS (49%) among the shipyard workers. They were exposed to the same high intensity level of HAVS (mean = 4.19 ± 1.94 m/s(2)) from the use of vibrating hand-held tools. The VPT values were found to be higher for both fingers and both frequencies (index, 31.5 Hz = 110.91 ± 7.36 dB, 125 Hz = 117.0 ± 10.25 dB; little, 31.5 Hz = 110.70 ± 6.75 dB, 125 Hz = 117.71 ± 10.25 dB) compared to the normal healthy population with a mean threshold shift of between 9.20 to 10.61 decibels. The frequency of 31.5 Hz had a higher percentage of positive mean reference threshold shift (index finger=93.6%, little finger=100%) compared to 125 Hz (index finger=85.1%, little finger=78.7%). In conclusion, the prevalence of HAVS was lower than those working in a cold environment; however, all workers had a higher mean VPT value compared to the normal population with all those reported as having HAVS showing a positive mean reference threshold shift of VPT value.

Genotoxic Evaluation of Mexican Welders Occupationally Exposed to Welding-Fumes Using the Micronucleus Test on Exfoliated Oral Mucosa Cells: A Cross-Sectional, Case-Control Study

PubMed Central

Jara-Ettinger, Ana Cecilia; López-Tavera, Juan Carlos; Zavala-Cerna, María Guadalupe; Torres-Bugarín, Olivia

2015-01-01

Background An estimated 800,000 people worldwide are occupationally exposed to welding-fumes. Previous studies show that the exposure to such fumes is associated with damage to genetic material and increased cancer risk. In this study, we evaluate the genotoxic effect of welding-fumes using the Micronucleus Test on oral mucosa cells of Mexican welders. Material and Methods We conducted a cross-sectional, matched case-control study of n = 66 (33 exposed welders, and 33 healthy controls). Buccal mucosa smears were collected and stained with acridine orange, observed under 100x optical amplification with a fluorescence lamp, and a single-blinded observer counted the number of micronuclei and other nuclear abnormalities per 2,000 observed cells. We compared the frequencies of micronuclei and other nuclear abnormalities, and fitted generalised linear models to investigate the interactions between nuclear abnormalities and the exposure to welding-fumes, while controlling for smoking and age. Results Binucleated cells and condensed-chromatin cells showed statistically significant differences between cases and controls. The frequency of micronuclei and the rest of nuclear abnormalities (lobed-nuclei, pyknosis, karyolysis, and karyorrhexis) did not differ significantly between the groups. After adjusting for smoking, the regression results showed that the occurrence of binucleated cells could be predicted by the exposure to welding-fumes plus the presence of tobacco consumption; for the condensed-chromatin cells, our model showed that the exposure to welding-fumes is the only reliable predictor. Conclusions Our findings suggest that Mexican welders who are occupationally exposed to welding-fumes have increased counts of binucleated and condensed-chromatin cells. Nevertheless, the frequencies of micronuclei and the rest of nuclear abnormalities did not differ between cases and controls. Further studies should shed more light on this subject. PMID:26244938

Genotoxic Evaluation of Mexican Welders Occupationally Exposed to Welding-Fumes Using the Micronucleus Test on Exfoliated Oral Mucosa Cells: A Cross-Sectional, Case-Control Study.

PubMed

Jara-Ettinger, Ana Cecilia; López-Tavera, Juan Carlos; Zavala-Cerna, María Guadalupe; Torres-Bugarín, Olivia

2015-01-01

An estimated 800,000 people worldwide are occupationally exposed to welding-fumes. Previous studies show that the exposure to such fumes is associated with damage to genetic material and increased cancer risk. In this study, we evaluate the genotoxic effect of welding-fumes using the Micronucleus Test on oral mucosa cells of Mexican welders. We conducted a cross-sectional, matched case-control study of n = 66 (33 exposed welders, and 33 healthy controls). Buccal mucosa smears were collected and stained with acridine orange, observed under 100x optical amplification with a fluorescence lamp, and a single-blinded observer counted the number of micronuclei and other nuclear abnormalities per 2,000 observed cells. We compared the frequencies of micronuclei and other nuclear abnormalities, and fitted generalised linear models to investigate the interactions between nuclear abnormalities and the exposure to welding-fumes, while controlling for smoking and age. Binucleated cells and condensed-chromatin cells showed statistically significant differences between cases and controls. The frequency of micronuclei and the rest of nuclear abnormalities (lobed-nuclei, pyknosis, karyolysis, and karyorrhexis) did not differ significantly between the groups. After adjusting for smoking, the regression results showed that the occurrence of binucleated cells could be predicted by the exposure to welding-fumes plus the presence of tobacco consumption; for the condensed-chromatin cells, our model showed that the exposure to welding-fumes is the only reliable predictor. Our findings suggest that Mexican welders who are occupationally exposed to welding-fumes have increased counts of binucleated and condensed-chromatin cells. Nevertheless, the frequencies of micronuclei and the rest of nuclear abnormalities did not differ between cases and controls. Further studies should shed more light on this subject.

Longitudinal T1 relaxation rate (R1) captures changes in short-term Mn exposure in welders

PubMed Central

Lewis, Mechelle M.; Flynn, Michael R.; Lee, Eun-Young; Van Buren, Scott; Van Buren, Eric; Du, Guangwei; Fry, Rebecca C.; Herring, Amy H.; Kong, Lan; Mailman, Richard B.; Huang, Xuemei

2016-01-01

Objectives We demonstrated recently that the T1 relaxation rate (R1) captured short-term Mn exposure in welders with chronic, relatively low exposure levels in a cross-sectional study. In the current study, we used a longitudinal design to examine whether R1 values reflect the short-term dynamics of Mn exposure. Methods Twenty-nine welders were evaluated at baseline and 12 months. Occupational questionnaires estimated short-term welding exposure using welding hours in the 90 days prior to each study visit (HrsW90). In addition, blood Mn levels, the pallidal index (PI; globus pallidus T1-weighted intensity (T1WI)/frontal white matter T1WI), and R1 values in brain regions of interest (ROIs) were determined as Mn biomarkers at each visit. Associations between changes in estimated welding exposure and changes in purported Mn biomarkers were assessed by Spearman’s correlations with adjustment for age and baseline R1, HrsW90, and blood Mn values. Results Changes in welding hours (HrsW90: the short-term welding exposure estimate), was associated significantly with changes in R1 values in the putamen (r=0.541, p=0.005), caudate (R=0.453, p=0.023), globus pallidus (R=0.430, p=0.032), amygdala (R=0.461, p=0.020), and hippocampus (R=0.447, p=0.025), but not with changes in blood Mn levels or the PI. Discussion Changes in R1 values correlated with changes in the short-term welding exposure estimate, but not with more traditional measures of Mn exposure (blood Mn levels or PI). These results suggest that R1 may serve as a useful marker to capture the short-term dynamics in Mn brain accumulation related to welding exposure. PMID:27567731

Women Apprentices in Hawaii: Characteristics of Females Registered with Pearl Harbor Naval Shipyard and the Hawaii Department of Labor and Industrial Relations.

ERIC Educational Resources Information Center

White, Barbara

A study examined the characteristics, educational training, and background experiences of women who entered apprenticeship in Hawaii during the period from July 1, 1974, through June 30, 1982. Survey instruments were completed by 118 of 243 female apprentices originally contacted--58 women registered with Pearl Harbor Naval Shipyard and 60 women…

Hair Manganese as an Exposure Biomarker among Welders

PubMed Central

Reiss, Boris; Simpson, Christopher D.; Baker, Marissa G.; Stover, Bert; Sheppard, Lianne; Seixas, Noah S.

2016-01-01

Quantifying exposure and dose to manganese (Mn) containing airborne particles in welding fume presents many challenges. Common biological markers such as Mn in blood or Mn in urine have not proven to be practical biomarkers even in studies where positive associations were observed. However, hair Mn (MnH) as a biomarker has the advantage over blood and urine that it is less influenced by short-term variability of Mn exposure levels because of its slow growth rate. The objective of this study was to determine whether hair can be used as a biomarker for welders exposed to manganese. Hair samples (1cm) were collected from 47 welding school students and individual air Mn (MnA) exposures were measured for each subject. MnA levels for all days were estimated with a linear mixed model using welding type as a predictor. A 30-day time-weighted average MnA (MnA30d) exposure level was calculated for each hair sample. The association between MnH and MnA30d levels was then assessed. A linear relationship was observed between log-transformed MnA30d and log-transformed MnH. Doubling MnA30d exposure levels yields a 20% (95% confidence interval: 11–29%) increase in MnH. The association was similar for hair washed following two different wash procedures designed to remove external contamination. Hair shows promise as a biomarker for inhaled Mn exposure given the presence of a significant linear association between MnH and MnA30d levels. PMID:26409267

Subfertility in relation to welding. A case referent study among male welders.

PubMed

Bonde, J P

1990-02-01

A recent report indicates that welding work is associated with increased risk of reduced semen quality. The purpose of this study was to investigate a possible association between welding exposure and male subfertility. A cross-sectional population of 673 metal workers and electricians employed at six major Danish work places in the same geographic area constituted the study population. Data on reproductive and occupational experience was obtained by means of a self-administered postal questionnaire. The response rate was 79 percent among welders and 83 percent among the other workers. A significantly increased rate of delayed conception in relation to welding work at the time of this event was observed when self-reported welding exposure among cases of delayed conception was compared to welding exposure both among age-matched referents and among referents with a child born without delay in conception. However, in the first approach the risk dropped to insignificant levels when adjustments were made for potential confounding factors. This preliminary study has methodological drawbacks, and the association between welding exposure and male fertility should be investigated further.

Pb(II) and Cd(II) removal from aqueous solution, shipyard wastewater, and landfill leachate by modified Rhizopus oryzae biomass

NASA Astrophysics Data System (ADS)

Naeimi, Behrouz; Foroutan, Rauf; Ahmadi, Bahram; Sadeghzadeh, Farzaneh; Ramavandi, Bahman

2018-04-01

This study was designed to remove Pb(II) and Cd(II) from aqueous solution, shipyard wastewater, and sanitary landfill leachate using an alkaline-modified Rhizopus oryzae biomass. According to the Fourier transform infrared test, different functional groups like O–H, N–H, C=O, and P–O were detected in the bioadsorbent. The x-ray fluorescence (XRF) analysis showed that CaO, P2O3, and SO3 oxides have the highest content in the bioadsorbent. The surface area of modified Rhizopus oryzae was obtained as 20.32 m2 g‑1. The effect of initial pH, temperature, contact time, and bioadsorbent dose on the metals removal was discussed. At optimal conditions, maximum Pb(II) and Cd(II) removal was obtained 95.66% and 94.55%, respectively. Freundlich model was well- accurately described the equilibrium data. Among four studied models, the pseudo-second-order was better able to describe the kinetic behavior of the bioadsorption process. The amount of enthalpy, free energy of Gibbs, and entropy parameters indicated that the bioadsorption process of studied heavy metals is negative, exothermic, and spontaneous. The amount of heavy metals in a shipyard wastewater and sanitary landfill leachate was significantly decreased by using the developed bioadsorbent.

Accumulation of butyltins in sediments and lipid tissues of the Asian clam, Potamocorbula amurensis, near Mare Island Naval Shipyard, San Francisco Bay

USGS Publications Warehouse

Pereira, W.E.; Wade, T.L.; Hostettler, F.D.; Parchaso, F.

1999-01-01

Studies of butyltin compounds in soil, benthic sediments and the Asian clam Potamocorbula amurensis were conducted at the former Mare Island Naval Shipyard, and nearby Mare Island and Carquinez Straits in San Francisco Bay, California. Soils from a sandblast abrasives dump site at the shipyard contained low concentrations of mono-, di- and tributyltin (0.3-52 ng/g, total butyltin). Similarly, concentrations of total butyltin in benthic sediments from nearby Mare Island and Carquinez Straits ranged from 1.3 to 8.1 ng/g. In contrast, clams accumulated much greater concentrations (152-307 ng/g, total butyltin). Tributyltin (TBT) and dibutyltin (DBT) made up from 54-85% to 15-46%, respectively, of the total butyltin body burden of the clams. Biota Sediment Accumulation Factors (BSAFs) for butyltins in Potamocorbula were in reasonable agreement with literature values; they are greater than those of neutral hydrophobic compounds, suggesting that partitioning and binding processes may be involved in bioaccumulation. Tributyltin is a potent endocrine disrupting chemical. There is potential for long-term chronic effects of TBT in San Francisco Bay.

Ultraviolet-B phototoxicity and hypothetical photomelanomagenesis: intraocular and crystalline lens photoprotection.

PubMed

Mainster, Martin A; Turner, Patricia L

2010-04-01

Ultraviolet-B (UV-B) radiation can cause phototoxic macular injuries in young people who have been sunbathing but not sungazing and in welders. Welders have a reportedly increased risk of uveal melanoma. We analyze phakic and pseudophakic risks for solar and welding arc UV-B exposure. Optical radiation measurement, analysis, and perspective. Spectral transmittances were measured for UV-transmitting, UV-blocking, and blue-blocking intraocular lenses (IOLs). The photoprotective performances of crystalline and intraocular lenses were analyzed using relevant epidemiologic and laboratory data and action spectra for acute retinal phototoxicity and melanoma photocarcinogenesis. Crystalline lens UV-B retinal protection is deficient in children and young adults, increasing their potential susceptibility to acute retinal phototoxicity and hypothetical photomelanomagenesis. UV-B radiation has sufficient energy/photon to induce primary melanomagenic DNA lesions, unlike blue light or UV-A radiation. UV-blocking and blue-blocking IOLs have negligible UV-B transmittance. UV-transmitting IOL transmittance of UV-B radiation is equivalent to that of a 15-year-old crystalline lens. If optical radiation exposure is responsible for welders' increased risk of uveal melanoma, then UV-B radiation is the most probable causative agent and spectacle wear is a potential confounding factor in epidemiologic studies of ocular melanoma. Welders under 30 years of age are at greater risk for welding maculopathy than older welders. Children, adults under 30 years of age, and pseudophakic individuals with UV-transmitting IOLs should wear sunglasses in bright environments because of the UV-B window in their crystalline lenses or IOLs. Copyright 2010 Elsevier Inc. All rights reserved.

Hair Manganese as an Exposure Biomarker among Welders.

PubMed

Reiss, Boris; Simpson, Christopher D; Baker, Marissa G; Stover, Bert; Sheppard, Lianne; Seixas, Noah S

2016-03-01

Quantifying exposure and dose to manganese (Mn) containing airborne particles in welding fume presents many challenges. Common biological markers such as Mn in blood or Mn in urine have not proven to be practical biomarkers even in studies where positive associations were observed. However, hair Mn (MnH) as a biomarker has the advantage over blood and urine that it is less influenced by short-term variability of Mn exposure levels because of its slow growth rate. The objective of this study was to determine whether hair can be used as a biomarker for welders exposed to manganese. Hair samples (1cm) were collected from 47 welding school students and individual air Mn (MnA) exposures were measured for each subject. MnA levels for all days were estimated with a linear mixed model using welding type as a predictor. A 30-day time-weighted average MnA (MnA30d) exposure level was calculated for each hair sample. The association between MnH and MnA30d levels was then assessed. A linear relationship was observed between log-transformed MnA30d and log-transformed MnH. Doubling MnA30d exposure levels yields a 20% (95% confidence interval: 11-29%) increase in MnH. The association was similar for hair washed following two different wash procedures designed to remove external contamination. Hair shows promise as a biomarker for inhaled Mn exposure given the presence of a significant linear association between MnH and MnA30d levels. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

U. S. Navy Deepening of Pinole Shoal and Mare Island Strait Regulatory Permit Application by the Commander, Mare Island Shipyard, Solano County, California.

DTIC Science & Technology

1981-07-01

1858 and 1970 513 ships, ranging from landing craft and destroyers to battleships and Polaris submarines have been launched from the Shipyard...impacts would be experienced by local wildlife, both on the site and at adjacent areas. On the other hand open space habitat enhancement of the site...and project History. .. ............. ...... 20 Sumary .. .............. ................ 1,10 Terestrial Vegetation .. ............... ........ 33

Technical Feasibility Study for Deployment of Ground-Source Heat Pump Systems: Portsmouth Naval Shipyard -- Kittery, Maine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hillesheim, M.; Mosey, G.

2014-11-01

The U.S. Environmental Protection Agency (EPA) Office of Solid Waste and Emergency Response, in accordance with the RE-Powering America's Lands initiative, engaged the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to conduct feasibility studies to assess the viability of developing renewable energy generating facilities on contaminated sites. Portsmouth Naval Shipyard (PNSY) is a United States Navy facility located on a series of conjoined islands in the Piscataqua River between Kittery, ME and Portsmouth, NH. EPA engaged NREL to conduct a study to determine technical feasibility of deploying ground-source heat pump systems to help PNSY achieve energy reductionmore » goals.« less

Factors associated with the prevalence of back pain and work absence in shipyard workers.

PubMed

Watanabe, Seiji; Takahashi, Toshiaki; Takeba, Jun; Miura, Hiromasa

2018-01-11

We conducted a questionnaire survey of shipyard workers to identify difficulties experienced due to orthopedic or musculoskeletal disorders. The subjects were 375 workers (male, 361; female, 14) who worked for a single shipbuilding company. Questionnaire items covered the working environment, including work environment, working posture, and the weight of objects that the subject dealt with, as well as physical and lifestyle characteristics, namely smoking habits, drinking habits, sleeping hours, medications, exercise habits, and any weight gain of 20 kg or more since the age of 20. Subjects were also asked to indicate if they regularly experienced any of 17 listed difficulties in their daily lives, and to use an illustration of the human body to mark any body parts that were painful or hard to move. The mean age was 41.8 years (19-73 years). The lower and/or upper back was the most frequent site of pain (46.5%), followed by the shoulders (11.4%), knees (9.6%), and neck (5.3%). Maintaining a half-sitting posture was the most problematic activity of daily living. Back pain was less frequent in subjects who exercised regularly, and more common in those who worked with heavy loads or in narrow spaces. A multinomial logistic regression analysis showed that absence from work was more common in subjects with back pain who had gained weight since their youth, who smoked, who used fire while welding metal, or who worked in a lying posture. While 35.4% of subjects had experienced absence from work due to musculoskeletal pain, only 5.1% were permitted by their employer to alter their work content or reduce their workload. These results indicate that a large number of shipyard workers have difficulties in their work and daily life activities due to back pain. To prevent worsening of pain and to reduce work absence, it is important to provide appropriate training to minimize the risk factors for back pain that were identified in this study.

An investigation of bias in a study of nuclear shipyard workers.

PubMed

Greenberg, E R; Rosner, B; Hennekens, C; Rinsky, R; Colton, T

1985-02-01

The authors examined discrepant findings between a 1978 proportional mortality study and a 1981 cohort study of workers at the Portsmouth, New Hampshire, Naval Shipyard to determine whether the healthy worker effect, selection bias, or measurement bias could explain why only the proportional mortality study found excess cancer deaths among nuclear workers. Lower mortality from noncancer causes in nuclear workers (the healthy worker effect) partly accounted for the observed elevated cancer proportional mortality. More important, however, was measurement bias which occurred in the proportional mortality study when nuclear workers who had not died of cancer were misclassified as not being nuclear workers based on information from their next of kin, thereby creating a spurious association. Although the proportional mortality study was based on a small sample of all deaths occurring in the cohort, selection bias did not contribute materially to the discrepant results for total cancer deaths. With regard to leukemia, misclassification of occupation in the proportional mortality study and disagreement about cause of death accounted for some of the reported excess deaths.

[Occupational exposure to gases emitted in mild and stainless steel welding].

PubMed

Matczak, W; Gromiec, J

2001-01-01

The objective of this work was to select optimal methods for determination of toxic gases (NOx, NO2, CO, CO2, O3) and to evaluate occupational exposure of welders to those gases. The survey covered workers employed in shipyards, and other metal product fabrication plants engaged in welding mild and stainless steel by different techniques (manual metal are, metal active gas, tungsten inert gas welding; gas, plasma, laser cutting and resistance welding). Personal and stationary air samples were collected to determine time weighted average (TWA) and short-term concentrations of gases. For determination of nitrogen oxides the following analytical techniques were employed: spectrophotometry with collection on liquid and solid sorbents and ion chromatography with collection on solid sorbents. All the gases were determined also by automatic or direct reading methods: flow or diffusion detector tubes and photometric and electrochemical analyzers. The determined TWA concentrations were below respective Maximum Allowable Concentrations (MAC) but exposure limits for short term exposure were exceeded in some cases. The average NO2 i NOx ratio was 1:4. According to Polish regulations regarding the MAC value for nitrogen oxides the analytical method should enable determination of total NOx by either direct or indirect simultaneous determination of both NO and NO2. The applicability of the spectrophotometric method of analysis of atmospheric NOx to determination of low NOx concentrations at welders working posts has been confirmed.

Initial Testing for the Recommendation of Improved Gas Metal Arc Welding Procedures for HY-80 Steel Plate Butt Joints at Norfolk Naval Shipyard

DTIC Science & Technology

2015-12-01

is unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) Hull cut welding proficiency is an essential skill maintained by personnel...at naval shipyards. This thesis explores arc weld theory to develop ideal submarine hull butt joint designs and recommends preliminary testing to...shipboard hull welding applications, theoretically. Butt joint samples were created using HY-80 steel plate so that the following comparisons could

Development of a CCTV system for welder training and monitoring of Space Shuttle Main Engine welds

NASA Technical Reports Server (NTRS)

Gordon, S. S.; Flanigan, L. A.; Dyer, G. E.

1987-01-01

A Weld Operator's Remote Monitoring System (WORMS) for remote viewing of manual and automatic GTA welds has been developed for use in Space Shuttle Main Engine (SSME) manufacturing. This system utilizes fiberoptics to transmit images from a receiving lens to a small closed-circuit television (CCTV) camera. The camera converts the image to an electronic signal, which is sent to a videotape recorder (VTR) and a monitor. The overall intent of this system is to provide a clearer, more detailed view of welds than is available by direct observation. This system has six primary areas of application: (1) welder training; (2) viewing of joint penetration; (3) viewing visually inaccessible welds; (4) quality control and quality assurance; (5) remote joint tracking and adjustment of variables in machine welds; and (6) welding research and development. This paper describes WORMS and how it applies to each application listed.

The National Shipbuilding Research Program. 1997 Ship Production Symposium. Implementation of Integrated CAD/CAM Systems in Small and Medium Sized Shipyards: A Case Study

DTIC Science & Technology

1997-04-01

implied, with respect to the accuracy, completeness or usefulness of the information contained in this report/ manual , or that the use of any information...shipyards throughout the world have introduced various aspects of CAD/CAM piecemeal as substitutes for manual processes, the greatest improvement in...possibility of multiple models of the molded geometry being developed, which would cause the loss of geometry control. Numerous AutoLisp routines were used

Levels and predictors of airborne and internal exposure to chromium and nickel among welders--results of the WELDOX study.

PubMed

Weiss, Tobias; Pesch, Beate; Lotz, Anne; Gutwinski, Eleonore; Van Gelder, Rainer; Punkenburg, Ewald; Kendzia, Benjamin; Gawrych, Katarzyna; Lehnert, Martin; Heinze, Evelyn; Hartwig, Andrea; Käfferlein, Heiko U; Hahn, Jens-Uwe; Brüning, Thomas

2013-03-01

The objective of this analysis was to investigate levels and determinants of exposure to airborne and urinary chromium (Cr, CrU) and nickel (Ni, NiU) among 241 welders. Respirable and inhalable welding fume was collected during a shift, and the metal content was determined using inductively coupled plasma mass spectrometry. In post-shift urine, CrU and NiU were measured by means of graphite furnace atom absorption spectrometry, with resulting concentrations varying across a wide range. Due to a large fraction below the limits of quantitation we applied multiple imputations to the log-transformed exposure variables for the analysis of the data. Respirable Cr and Ni were about half of the concentrations of inhalable Cr and Ni, respectively. CrU and NiU were determined with medians of 1.2 μg/L (interquartile range <1.00; 3.61) and 2.9 μg/L (interquartile range <1.50; 5.97). Furthermore, Cr and Ni correlated in respirable welding fume (r=0.79, 95% CI 0.74-0.85) and urine (r=0.55, 95% CI 0.44-0.65). Regression models identified exposure-modulating variables in form of multiplicative factors and revealed slightly better model fits for Cr (R(2) respirable Cr 48%, CrU 55%) than for Ni (R(2) respirable Ni 42%, NiU 38%). The air concentrations were mainly predicted by the metal content in electrodes or base material in addition to the welding technique. Respirable Cr and Ni were good predictors for CrU and NiU, respectively. Exposure was higher when welding was performed in confined spaces or with inefficient ventilation, and lower in urine when respirators were used. In conclusion, statistical modelling allowed the evaluation of determinants of internal and external exposure to Cr and Ni in welders. Welding parameters were stronger predictors than workplace conditions. Airborne exposure was lowest inside respirators with supply of purified air. Copyright © 2012 Elsevier GmbH. All rights reserved.

Inducible nitric oxide synthase gene methylation and parkinsonism in manganese-exposed welders

PubMed Central

Nielsen, Susan Searles; Checkoway, Harvey; Criswell, Susan R.; Farin, Federico M.; Stapleton, Patricia L.; Sheppard, Lianne; Racette, Brad A.

2015-01-01

Introduction Neurologist-assessed parkinsonism signs are prevalent among workers exposed to manganese (Mn)-containing welding fume. Neuroinflammation may possibly play a role. Inducible nitric oxide synthase, coded by NOS2, is involved in inflammation, and particulate exposure increases the gene’s expression through methylation of CpG sites in the 5′ region. Methods We assessed DNA methylation at three CpG sites in the NOS2 exon 1 from blood from 201 welders. All were non-Hispanic Caucasian men 25–65 years old who were examined by a neurologist specializing in movement disorders. We categorized the workers according to their Unified Parkinson Disease Rating Scale motor subsection 3 (UPDRS3) scores as parkinsonism cases (UPDRS3 ≥ 15; n = 49), controls (UPDRS3 < 6; n = 103), or intermediate (UPDRS3 ≥6 to <15; n = 49). Results While accounting for age, examiner and experimental plate, parkinsonism cases had lower mean NOS2 methylation than controls (p-value for trend = 0.04), specifically at CpG site 8329 located in an exonic splicing enhancer of NOS2 (p-value for trend = 0.07). These associations were not observed for the intermediate UPDRS3 group (both p-value for trend ≥ 0.59). Conclusions Inflammation mediated by inducible nitric oxide synthase may possibly contribute to the association between welding fume and parkinsonism, but requires verification in a longitudinal study. PMID:25634431

Awareness and Utilization of Welders' Personal Protective Eye Devices and Associated Factors: Findings and Lessons From a Nigerian Population.

PubMed

Eze, Boniface I; Okoye, Obiekwe; Aguwa, Emmanuel N

2015-04-01

This study assessed commercial welders' awareness and utilization of personal protective eye devices (PPEDs), and their associations, in Enugu, Nigeria, between January and March, 2011. The participants included 343 males, age 33.9 years±10.0 SD years. The participants reported high awareness of welding-associated ocular hazards (99.4%) and PPEDs (75.2%-98.3%), but low PPED possession and utilization rates. Cost and "presumed lack of utility" were the leading barriers to PPED possession; non-utilization was mainly attributed to "user inconvenience" and "presumed lack of protective benefit." PPED utilization was significantly associated with lower educational status (p=.030) and electric welding (p<.0001). The underlying causes are amenable to preventive occupational eye health education, enhanced ergonomics and affordability of PPEDs, and legislative enforcement of their use. © 2015 The Author(s).

Novel Round Energy Director for Use with Servo-driven Ultrasonic Welder

NASA Astrophysics Data System (ADS)

Savitski, Alex; Klinstein, Leo; Holt, Kenneth

Increasingly stringent process repeatability and precision of assembly requirements are common for high-volume manufacturing for electronic, automotive and especially medical device industries, in which components for disposable medication delivery devices are produced in hundreds of millions annually. Ultrasonic welding, one of the most efficient of plastic welding processes often joins these small plastic parts together, and quite possibly, the one most broadly adopted for high volume assembly. The very fundamental factor in ultrasonic welding process performance is a proper joint design, the most common of which is a design utilizing an energy director. Keeping the energy director size and shape consistent on a part-to-part basis in high volume, multi-cavity operations presents a constant challenge to molded part vendors, as dimensional variations from cavity to cavity and variations in the molding process are always present. A newly developed concept of energy director design, when the tip of the energy director is round, addresses these problems, as the round energy director is significantly easier to mold and maintain its dimensional consistency. It also eliminates a major source of process variability for assembly operations. Materializing the benefits of new type of joint design became possible with the introduction of servo-driven ultrasonic welders, which allow an unprecedented control of material flow during the welding cycle and results in significantly improved process repeatability. This article summarizes results of recent studies focused on evaluating performance of round energy director and investigating the main factors responsible for the joint quality.

[Evaluation of measurement uncertainty of welding fume in welding workplace of a shipyard].

PubMed

Ren, Jie; Wang, Yanrang

2015-12-01

To evaluate the measurement uncertainty of welding fume in the air of the welding workplace of a shipyard, and to provide quality assurance for measurement. According to GBZ/T 192.1-2007 "Determination of dust in the air of workplace-Part 1: Total dust concentration" and JJF 1059-1999 "Evaluation and expression of measurement uncertainty", the uncertainty for determination of welding fume was evaluated and the measurement results were completely described. The concentration of welding fume was 3.3 mg/m(3), and the expanded uncertainty was 0.24 mg/m(3). The repeatability for determination of dust concentration introduced an uncertainty of 1.9%, the measurement using electronic balance introduced a standard uncertainty of 0.3%, and the measurement of sample quality introduced a standard uncertainty of 3.2%. During the determination of welding fume, the standard uncertainty introduced by the measurement of sample quality is the dominant uncertainty. In the process of sampling and measurement, quality control should be focused on the collection efficiency of dust, air humidity, sample volume, and measuring instruments.

2011 ESTCP Live Site Demonstrations, Vallejo CA, ESTCP MR-1165, Demonstration Data Report, Former Mare Island Naval Shipyard, MTADS Discrimination Array, (TEMTADS) Survey

DTIC Science & Technology

2012-04-05

small Industry Standard Object ( ISO ) is a 1-in nominal, 4-in long pipe nipple1 that has been described previously [15]. The SuperISO is similar to...the small ISO , but 8” long2. Table 5-2 – Details of Former Mare Island Naval Shipyard IVS Target Description Easting (m) Northing (m) Depth to...13 Horizontal Along ~320 3 Small ISO 565,255.82 4,215,461.00 10 Horizontal Along ~320 All data sets for each of the emplaced IVS items were

Radiological survey of the Norfolk Naval Station, the Norfolk Naval Shipyard, and Newport News Shipbuilding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sensintaffar, E.L.; Blanchard, R.L.

1988-10-01

Since 1963, the Eastern Environmental Radiation Facility (EERF), US Environmental Protection Agency (USEPA), in cooperation with the US Naval Sea Systems Command (NAVSEA) has surveyed facilities serving nuclear-powered warships on the Atlantic and Pacific coasts and the Gulf of Mexico. These surveys assess whether the operation of nuclear-powered warships, during construction, maintenance, overhaul, or refueling, have created elevated levels of radioactivity. The surveys emphasize sampling those areas and pathways that could expose the public. In 1984, NAVSEA requested that EPA survey all active facilities servicing nuclear-powered warships over the next three years. This report contains the results of surveys conductedmore » at Norfolk Naval Shipyard, Norfolk Naval Station and Newport News Shipbuilding during the period July 28 to August 1, 1986. Some of these same areas were previously surveyed by EERF personnel (at that time US Public Health Service) in January 1968. 1 ref., 4 figs., 5 tabs.« less

Musculoskeletal disorders in shipyard industry: prevalence, health care use, and absenteeism.

PubMed

Alexopoulos, Evangelos C; Tanagra, Dimitra; Konstantinou, Eleni; Burdorf, Alex

2006-11-24

It is unclear whether the well-known risk factors for the occurrence of musculoskeletal disorders (MSD) also play an important role in the determining consequences of MSD in terms of sickness absence and health care use. A cross-sectional study was conducted among 853 shipyard employees. Data were collected by questionnaire on physical and psychosocial workload, need for recovery, perceived general health, occurrence of musculoskeletal complaints, and health care use during the past year. Retrospective data on absenteeism were also available from the company register. In total, 37%, 22%, and 15% of employees reported complaints of low back, shoulder/neck, and hand/wrist during the past 12 months, respectively. Among all employees with at least one MSD, 27% visited a physician at least once and 20% took at least one period of sick leave. Various individual and work-related factors were associated with the occurrence of MSD. Health care use and absenteeism were strongest influenced by chronicity of musculoskeletal complaints and comorbidity with other musculoskeletal complaints and, to a lesser extent, by work-related factors. In programmes aimed at preventing the unfavourable consequences of MSD in terms of sickness absence and health care use it is important to identify the (individual) factors that determine the development of chronicity of complaints. These factors may differ from the well-know risk factors for the occurrence of MSD that are targeted in primary prevention.

Evaluation of an aerosol photometer for monitoring welding fume levels in a shipyard.

PubMed

Glinsmann, P W; Rosenthal, F S

1985-07-01

A direct reading aerosol photometer (Sibata P-5 Digital Dust Indicator) was used to assess fume levels from welding and burning operations in a shipyard. The photometer was calibrated with gravimetric analysis of filter samples collected simultaneously with instrument readings. A six-fold difference between calibration factors for personal and area samples was found. This difference can be explained by expected changes in particle size distributions in welding fume. Monitoring of various work situations was performed in order to assess the value of the photometer for the measurement of fume. Measurements categorized by enclosure of space and quality of ventilation indicated the presence of high fume levels in semi-enclosed and enclosed spaces. The build up of welding fume in an enclosed space occurred over several minutes after the arc was struck. Decay likewise required several minutes. During welding, wide fluctuations of fume concentrations were found. Thus a single reading was not adequate to characterize average fume levels. Although this type of instrument is useful for locating areas with high fume levels and monitoring the effectiveness of ventilation, the uncertainty in calibration factors makes accurate determinations of fume levels difficult.

Radiation exposure from work-related medical X-rays at the Portsmouth Naval Shipyard.

PubMed

Daniels, Robert D; Kubale, Travis L; Spitz, Henry B

2005-03-01

Previous analyses suggest that worker radiation dose may be significantly increased by routine occupational X-ray examinations. Medical exposures are investigated for 570 civilian workers employed at the Portsmouth Naval Shipyard (PNS) at Kittery, Maine. The research objective was to determine the radiation exposure contribution of work-related chest X-rays (WRX) relative to conventional workplace radiation sources. Methods were developed to estimate absorbed doses to the active (hematopoietic) bone marrow from X-ray examinations and workplace exposures using data extracted from worker dosimetry records (8,468) and health records (2,453). Dose distributions were examined for radiation and non-radiation workers. Photofluorographic chest examinations resulted in 82% of the dose from medical sources. Radiation workers received 26% of their collective dose from WRX and received 66% more WRX exposure than non-radiation workers. WRX can result in a significant fraction of the total dose, especially for radiation workers who were more likely to be subjected to routine medical monitoring. Omission of WRX from the total dose is a likely source of bias that can lead to dose category misclassification and may skew the epidemiologic dose-response assessment for cancers induced by the workplace.

[Follow-up examination of Danish stainless steel welders previously examined in 1987].

PubMed

Knudsen, Lisbeth Ehlert; Burr, Herman

2003-07-14

A Danish cohort from 1987 consisting of 226 stainless steel welders and reference persons is part of the European Study Group on Cytogenetic Biomarkers and Health (ESCH). In ESCH increased cancer morbidity and mortality was significantly associated with high levels of chromosomal aberrations, measured in blood samples several years prior to cancer registration. The positive association was found in two cohorts from the Nordic countries and from Italy. ESCH followed all registered cancer cases and control persons by questionnaires and interviews to obtain information about exposures in the period from the time of blood sampling for chromosomal aberration analysis to the time of cancer diagnosis. In Denmark the total cohort was included in the inquiry and the ESCH questions were supplemented with questions from the Danish National Work Environment Cohort Study 1990-95. Responses from one hundred and forty-four persons showed that seventy-four were employed at the same workplace place as in 1987. Differences in occupational exposures, such as more noise, heat and insufficient lighting and no differences in the self-rated health were found in comparison with the Danish National Work Environment Cohort Study as such and with the sample of metal workers. Only very few of the study persons knew the threshold limit value of welding fumes but a majority found that the working environment had improved during the past ten years. This study confirms hazardous exposures in stainless steel welding. The threshold limit value, however, has been lowered since 1987 suggesting there is less cancer risk today from stainless steel welding.

Impact of night-shift work on the prevalence of erosive esophagitis in shipyard male workers.

PubMed

Chung, Tae Heum; Lee, Jiho; Kim, Moon Chan

2016-08-01

Whether night-shift work is a risk factor for gastroesophageal reflux disease is controversial. The aim of this study was to investigate the association between night-shift work and other factors, and erosive esophagitis. A cross-sectional study with 6040 male shipyard workers was performed. Esophagogastroduodenoscopic examination and a survey about night-shift work status, lifestyle, medical history, educational status, and marital status were conducted in all workers. The odds ratios of erosive esophagitis according to night-shift work status were calculated by using the logistic regression model. The prevalence of erosive esophagitis increased in the night-shift workers [odds ratio, 95 % confidence interval: 1.41 (1.03-1.94)]. According to multiple logistic regression models, night-shift work, obesity, smoking, and alcohol consumption of ≥140 g/week were significant risk factors for erosive esophagitis. By contrast, Helicobacter pylori infection was negatively associated with erosive esophagitis. Night-shift work is suggested to be a risk factor for erosive esophagitis. Avoidance of night-shift work and lifestyle modification should be considered for prevention and management of gastroesophageal reflux disease.

Posture control and the risk of industrial accident: a stabilographic investigation in a naval shipyard.

PubMed

Moll van Charante, A W; Snijders, C J; Mulder, P G

1991-10-01

In a previous case-control study on the effect of impaired perceptual acuity on the risk of industrial injuries at a naval shipyard, three factors which might influence the perception and processing of sensory impressions--alcohol consumption, hearing loss exceeding 20 decibels (dB) and exposure to noise exceeding 82 dB(A)--were found to contribute to the risk of injury. According to recent reports, these factors can all lead to impaired posture control. Because in general about 40% of all accidents are associated with falling, tripping, slipping and the like, a supplementary study has been carried out to unravel possible confounding effects of posture control on these three risk factors. Cases (who had suffered two or more accidents during the preceding 4 years) and controls (who had been accident-free in the same period) were compared as regards posture control measured during silence or noise. No significant difference in posture control was found between cases and controls, either in silence or during exposure to heavy noise.

Effects of exposure to ethylene glycol ethers on shipyard painters: II. Male reproduction.

PubMed

Welch, L S; Schrader, S M; Turner, T W; Cullen, M R

1988-01-01

To determine whether 2-ethoxyethanol (2-EE) and 2-methoxyethanol (2-ME) affected the reproductive potential of exposed men, we examined the semen of 73 painters and 40 controls who work in a large shipyard. An industrial hygiene survey was performed to characterize the work environment. The men supplied information on demographic characteristics, medical conditions, personal habits, and reproductive history; underwent a physical examination; and provided a semen sample. Semen samples were analyzed for pH, volume, turbidity, liquidity, viability by stain exclusion and hypo-osmotic stress, sperm density and count per ejaculate, motility using a videotape technique, morphology, and morphometry. Serum was analyzed for testosterone, FSH, and LH. The industrial hygiene survey revealed that the painters were exposed to 2-EE at a time-weighted average (TWA) of 0-80.5 mg/m3 with a mean of 9.9 mg/m3, and to 2-ME at a TWA of 0-17.7 mg/m3 with a mean of 2.6 mg/m3. Painters had an increased prevalence of oligospermia and azoospermia and an increased odds ratio for a lower sperm count per ejaculate, while smoking was controlled. This finding is consistent with prior animal studies and with one human study. Potential biases and confounding of the data are discussed.

Environmental and occupational particulate matter exposures and ectopic heart beats in welders

PubMed Central

Cavallari, Jennifer M.; Fang, Shona C.; Eisen, Ellen A.; Mittleman, Murray A.; Christiani, David C.

2016-01-01

Objectives Links between arrhythmias and particulate matter exposures have been found among sensitive populations. We examined the relationship between personal PM2.5 (particulate matter ≤ 2.5μm aerodynamic diameter) exposures and ectopy in a panel study of healthy welders. Methods Simultaneous ambulatory electrocardiogram (ECG) and personal PM2.5 exposure monitoring with DustTrak™ Aerosol Monitor was performed on 72 males during work and non-work periods for 5–90 hours (median 40 hours). ECGs were summarized hourly for supraventricular ectopy (SVE) and ventricular ectopy (VE). PM2.5 exposures both work and non-work periods were averaged hourly with lags from 0- to 7-hours. Generalized linear mixed-effects models with a random participant intercept were used to examine the relationship between PM2.5 exposure and the odds of SVE or VE. Sensitivity analyses were performed to assess whether relationships differed by work period and current smokers. Results Participants had a mean(SD) age of 38(11) years and were monitored over 2,993 person-hours. The number of hourly ectopic events was highly skewed with mean(sd) of 14(69) VE and 1(4) SVE. We found marginally significant increases in VE with PM2.5 exposures in the 6th and 7th hour lags, yet no association with SVE. For every 100μg/m3 increase in 6th hour lagged PM2.5, the adjusted OR(95% CI) for VE was 1.03(1.00, 1.05). Results persisted in work or non-work exposure periods and non-smokers had increased odds of VE associated with PM2.5 as compared to smokers. Conclusions A small increase in the odds of ventricular ectopy with short term PM2.5 exposure was observed among relatively healthy men with environmental and occupational exposures. PMID:27052768

Manganese Fractionation Using a Sequential Extraction Method to Evaluate Welders' Shielded Metal Arc Welding Exposures During Construction Projects in Oil Refineries.

PubMed

Hanley, Kevin W; Andrews, Ronnee; Bertke, Steven; Ashley, Kevin

2015-01-01

The National Institute for Occupational Safety and Health has conducted an occupational exposure assessment study of manganese (Mn) in welding fume of construction workers rebuilding tanks, piping, and process equipment at two oil refineries. The objective of this study was to evaluate exposures to different Mn fractions using a sequential extraction procedure. Seventy-two worker-days were monitored for either total or respirable Mn during stick welding and associated activities both within and outside of confined spaces. The samples were analyzed using an experimental method to separate different Mn fractions by valence states based on selective chemical solubility. The full-shift total particulate Mn time-weighted average (TWA) breathing zone concentrations ranged from 0.013-29 for soluble Mn in a mild ammonium acetate solution; from 0.26-250 for Mn(0,2+) in acetic acid; from non-detectable (ND) - 350 for Mn(3+,4+) in hydroxylamine-hydrochloride; and from ND - 39 micrograms per cubic meter (μg/m(3)) for insoluble Mn fractions in hydrochloric and nitric acid. The summation of all Mn fractions in total particulate TWA ranged from 0.52-470 μg/m(3). The range of respirable particulate Mn TWA concentrations were from 0.20-28 for soluble Mn; from 1.4-270 for Mn(0,2+); from 0.49-150 for Mn(3+,4+); from ND - 100 for insoluble Mn; and from 2.0-490 μg/m(3) for Mn (sum of fractions). For all jobs combined, total particulate TWA GM concentrations of the Mn(sum) were 99 (GSD = 3.35) and 8.7 (GSD = 3.54) μg/m(3) for workers inside and outside of confined spaces; respirable Mn also showed much higher levels for welders within confined spaces. Regardless of particle size and confined space work status, Mn(0,2+) fraction was the most abundant followed by Mn(3+,4+) fraction, typically >50% and ∼30-40% of Mn(sum), respectively. Eighteen welders' exposures exceeded the ACGIH Threshold Limit Values for total Mn (100 μg/m(3)) and 25 exceeded the recently adopted respirable

A nested case-control study of leukemia mortality and ionizing radiation at the Portsmouth Naval Shipyard.

PubMed

Kubale, Travis L; Daniels, Robert D; Yiin, James H; Couch, James; Schubauer-Berigan, Mary K; Kinnes, Gregory M; Silver, Sharon R; Nowlin, Susan J; Chen, Pi-Hsueh

2005-12-01

A nested case-control study using conditional logistic regression was conducted to evaluate the exposure-response relationship between external ionizing radiation exposure and leukemia mortality among civilian workers at the Portsmouth Naval Shipyard (PNS), Kittery, Maine. The PNS civilian workers received occupational radiation exposure while performing construction, overhaul, repair and refueling activities on nuclear-powered submarines. The study age-matched 115 leukemia deaths with 460 controls selected from a cohort of 37,853 civilian workers employed at PNS between 1952 and 1992. In addition to radiation doses received in the workplace, a secondary analysis incorporating doses from work-related medical X rays and other occupational radiation exposures was conducted. A significant positive association was found between leukemia mortality and external radiation exposure, adjusting for gender, radiation worker status, and solvent exposure duration (OR = 1.08 at 10 mSv of exposure; 95% CI = 1.01, 1.16). Solvent exposure (including benzene and carbon tetrachloride) was also significantly associated with leukemia mortality adjusting for radiation dose, radiation worker status, and gender. Incorporating doses from work-related medical X rays did not change the estimated leukemia risk per unit of dose.

[Association between polymorphism of dopamine β-hydroxylase and neurological dysfunction hereditary susceptibility of electric welders].

PubMed

Chen, Wen-wen; Shao, Hua

2010-09-01

To investigate the relationship between genetic polymorphism of dopamine β-hydroxylase (DBH) and manganese-induced nerve injury. In a cross-sectional study, 402 electric welders who had worked over one year in relatively fixed sites were recruited, and the concentration of manganese in which they worked was stable. These samples was divided into high exposure group (CEI > 1) and low exposure group (CEI < 1) by CEI. Between the two groups, the groups were divided into abnormal group and normal group according to the result of neurologic check (there were 81 workers with abnormal neurological dysfunction in high exposure group and 28 workers in low exposure group, P < 0.05). Polymorphism of DBH gene was analyzed with polymerase chain reaction-restriction fragment length polymorphism. The distribution of A2A2 genotype and A2 allele of DBH was significantly different. In high exposure group, the distribution of A2A2 genotype and A2 allele of DBH in abnormal group was significantly wider than in normal group (A2A2 genotype, OR = 1.248, P < 0.05, A2 allele, OR = 1.103, P < 0.05). In low exposure group, the distribution of A2 allele of DBH in abnormal group was significantly wider than in normal group (OR = 1.176, P < 0.05). The individuals who carry A2A2 genotype and A2 allele of DBH have increased risk of neurological dysfunction after explosion to manganese for a certain time, which suggests that polymorphism of DBH (intron 5 Taq I) would play a great role in hereditary susceptibility of neurological dysfunction cause by manganese.

Dynamics of ultrasonic additive manufacturing.

PubMed

Hehr, Adam; Dapino, Marcelo J

2017-01-01

Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder. Copyright © 2016 Elsevier B.V. All rights reserved.

Effect of extremely low frequency magnetic field on antioxidant activity in plasma and red blood cells in spot welders.

PubMed

Sharifian, Akbar; Gharavi, Marjan; Pasalar, Parvin; Aminian, Omid

2009-01-01

The purpose of this study was to determine a possible relation between exposure to extremely low frequency magnetic field (ELF-MF) and the human antioxidant activity. The total serum antioxidant status (TAS), red blood cells (RBCs) glutathione peroxidase (GPX) and superoxide dismutase (SOD) were measured in 46 spot welders who were occupationally exposed to ELF-MF (magnetic field strength = 8.8-84 microTesla (microT), frequency = 50 Hertz (Hz) and electric field strength = 20-133 V/m). The results were compared with a nonexposed ELF-MF control group. The correlation between magnetic field strength and antioxidant activity in RBCs and plasma was then assessed. No significant differences in TAS levels were observed (P value = 0.065). However, in RBCs of exposed group, a significant decrease in SOD and GPX activities was observed (P value = 0.001 and 0.003, respectively). This decrease was measured as 22 and 12.3%, respectively. Furthermore, a significant negative correlation between SOD/GPX activities and magnetic field intensity was observed (coefficients of SOD: -0.625, significance: 0.0001 and coefficients of GPX: -0.348, significance: 0.018). The results of this study indicate that ELF-MF could influence the RBC antioxidant activity and might act as an oxidative stressor. Intracellular antioxidant enzymes such as SOD and GPX were found to be the most important markers involving in this process. The influence of magnetic field on the antioxidant activity of RBCs might occur even at the recommended levels of exposure.

Airborne exposure to inhalable hexavalent chromium in welders and other occupations: Estimates from the German MEGA database.

PubMed

Pesch, Beate; Kendzia, Benjamin; Hauptmann, Kristin; Van Gelder, Rainer; Stamm, Roger; Hahn, Jens-Uwe; Zschiesche, Wolfgang; Behrens, Thomas; Weiss, Tobias; Siemiatycki, Jack; Lavoué, Jerome; Jöckel, Karl-Heinz; Brüning, Thomas

2015-07-01

This study aimed to estimate occupational exposure to inhalable hexavalent chromium (Cr(VI)) using the exposure database MEGA. The database has been compiling Cr(VI) concentrations and ancillary data about measurements at German workplaces. We analysed 3659 personal measurements of inhalable Cr(VI) collected between 1994 and 2009. Cr(VI) was determined spectrophotometrically at 540 nm after reaction with diphenylcarbazide. We assigned the measurements to pre-defined at-risk occupations using the information provided about the workplaces. Two-thirds of the measurements were below the limit of quantification (LOQ) and multiply imputed according to the distribution above LOQ. The 75th percentile value was 5.2 μg/m(3) and the 95th percentile was 57.2 μg/m(3). We predicted the geometric mean for 2h sampling in the year 2000, and the time trend of Cr(VI) exposure in these settings with and without adjustment for the duration of measurements. The largest dataset was available for welding (N = 1898), which could be further detailed according to technique. The geometric means were above 5 μg/m(3) in the following situations: spray painting, shielded metal arc welding, and flux-cored arc welding if applied to stainless steel. The geometric means were between 1 μg/m(3) and 5 μg/m(3) for gas metal arc welding of stainless steel, cutting, hard-chromium plating, metal spraying and in the chemical chromium industry. The exposure profiles described here are useful for epidemiologic and industrial health purposes. Exposure to Cr(VI) varies not only between occupations, but also within occupations as shown for welders. In epidemiologic studies, it would be desirable to collect exposure-specific information in addition to the job title. Copyright © 2015 Elsevier GmbH. All rights reserved.

Neuropsychological sequelae of exposure to welding fumes in a group of occupationally exposed men.

PubMed

Bowler, Rosemarie M; Gysens, Sabine; Diamond, Emily; Booty, Andrew; Hartney, Christopher; Roels, Harry A

2003-10-01

This study compares the neuropsychological function, emotional status, visual function, and illness prevalence of 76 former and current chemical industry welders primarily involved in steel welding, and exposed to welding fumes for an average of 24.9 years with that of 42 unexposed, non-welder controls. Health and occupational history questionnaires were administered, as were the neuropsychological tests included in the World Health Organization Neurobehavioral Core Test Battery, Luria Motor Test, and selected tests from the WAIS-III, and WMS-III. Emotional status tests included the BSI, POMS, BAI, and BDI, and vision tests included the Snellen near visual acuity, Lanthony d-15 color vision, Vistech Contrast Sensitivity, and Schirmer strips. While welders and controls performed similarly on tests of verbal skills, verbal retention, and auditory span, welders performed worse than controls on tests of verbal learning, working memory, cognitive flexibility, visuomotor processing speed, and motor efficiency. Welders had poorer color vision and emotional status, and increased prevalence of illnesses and psychiatric symptoms. The increased symptoms in welders were related to decreased scores on tasks measuring verbal learning, visuomotor abilities, visuospatial abilities, and information processing, and motor efficiency. Within the group of welders, the number of hours welding was negatively related to scores on verbal learning, auditory span, working memory, cognitive flexibility, and motor efficiency.

75 FR 12485 - Revising the Notification Requirements in the Exposure Determination; Provisions of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-16

... of a Final OSHA Standard for Hexavalent Chromium, Chapter 2-Welding, Docket No. OSHA-H054a-2006- 0064... welding technique and posture used by different welders. Small differences in the welder's body position in relation to the welding task, the welder's body position in relation to the weld, and any LEV...

Welder

ERIC Educational Resources Information Center

Tech Directions, 2013

2013-01-01

Welding is used to create many things, from cars, trucks, and motorcycles to rail cars, ships, aircraft, rockets, and space stations. Welding is huge in the construction industry, too. Skyscrapers, bridges, and highways would be impossible to build without welding, as would oil and natural-gas pipelines, offshore oil platforms, wind turbines, and…

Application of linear mixed-effects model with LASSO to identify metal components associated with cardiac autonomic responses among welders: a repeated measures study

PubMed Central

Zhang, Jinming; Cavallari, Jennifer M; Fang, Shona C; Weisskopf, Marc G; Lin, Xihong; Mittleman, Murray A; Christiani, David C

2017-01-01

Background Environmental and occupational exposure to metals is ubiquitous worldwide, and understanding the hazardous metal components in this complex mixture is essential for environmental and occupational regulations. Objective To identify hazardous components from metal mixtures that are associated with alterations in cardiac autonomic responses. Methods Urinary concentrations of 16 types of metals were examined and ‘acceleration capacity’ (AC) and ‘deceleration capacity’ (DC), indicators of cardiac autonomic effects, were quantified from ECG recordings among 54 welders. We fitted linear mixed-effects models with least absolute shrinkage and selection operator (LASSO) to identify metal components that are associated with AC and DC. The Bayesian Information Criterion was used as the criterion for model selection procedures. Results Mercury and chromium were selected for DC analysis, whereas mercury, chromium and manganese were selected for AC analysis through the LASSO approach. When we fitted the linear mixed-effects models with ‘selected’ metal components only, the effect of mercury remained significant. Every 1 µg/L increase in urinary mercury was associated with −0.58 ms (−1.03, –0.13) changes in DC and 0.67 ms (0.25, 1.10) changes in AC. Conclusion Our study suggests that exposure to several metals is associated with impaired cardiac autonomic functions. Our findings should be replicated in future studies with larger sample sizes. PMID:28663305

Fundamental Automated Scheduling System (FASS): A Second Look.

DTIC Science & Technology

1986-12-01

Mr. J.H. Shoemaker and Mr. Ron Flatley of Norfolk Naval Shipyard; Mr. Bob Brunner of Long Beach Naval Shipyard; Mr. Barry Brinson of Charleston...Management, McGraw-Hill, 1978. Pressman , Roger S.. Software Engineering: A Practitioner’s Approach, McGraw-Hill, 1982. Project Systems Consultants Inc...J.H. Shoemaker Code 377 Norfolk Naval Shipyard Portsmouth. Vireinih 23709-5000 13. Mr. Barry Brinson-I Code 377 Charleston Naval Shipyard Charleston

A prospective study of decline in lung function in relation to welding emissions.

PubMed

Christensen, Sigve W; Bonde, Jens Peter; Omland, Oyvind

2008-02-26

Numerous cross-sectional studies have reported reduced lung function among welders but limitations of exposure assessment and design preclude causal inference. The aim of this study was to investigate if long-term exposure to welding fume particulates accelerates the age-related decline in lung function. Lung function was measured by spirometry in 1987 and 2004 among 68 steel welders and 32 non-welding production workers. The decline in forced expiratory volume (FEV1) was analysed in relation to cumulated exposure to fume particulates among welders during the follow-up period. Among smokers the decline in FEV1 through follow-up period was in average 150 ml larger among welders than non-welders while the difference was negligible among non-smokers. The results did not reach statistical significance and within welders the decline in lung function was not related to the cumulated welding particulate exposure during follow-up period Long-term exposure to welding emissions may accelerate the age-related decline of lung function but at exposure levels in the range of 1.5 to 6.5 mg/m3 the average annual excess loss of FEV1 is unlikely to exceed 25 ml in smokers and 10 ml in non-smokers.

77 FR 38658 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Asbestos in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... for OMB Review; Comment Request; Asbestos in Shipyards Standard ACTION: Notice. SUMMARY: The... information collection request (ICR) titled, ``Asbestos in Shipyards Standard,'' to the Office of Management... number) or by email at [email protected] . SUPPLEMENTARY INFORMATION: The Asbestos in Shipyards...

29 CFR 1915.501 - General provisions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety plan including hazards, controls, fire safety and health rules, and emergency procedures; (ii... (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard... require employers to protect all employees from fire hazards in shipyard employment, including employees...

29 CFR 1915.501 - General provisions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... safety plan including hazards, controls, fire safety and health rules, and emergency procedures; (ii... (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard... require employers to protect all employees from fire hazards in shipyard employment, including employees...

29 CFR 1915.501 - General provisions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety plan including hazards, controls, fire safety and health rules, and emergency procedures; (ii... (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard... require employers to protect all employees from fire hazards in shipyard employment, including employees...

A Cross-Sectional Study of the Cardiovascular Effects of Welding Fumes

PubMed Central

Li, Huiqi; Hedmer, Maria; Kåredal, Monica; Björk, Jonas; Stockfelt, Leo; Tinnerberg, Håkan; Albin, Maria; Broberg, Karin

2015-01-01

Objectives Occupational exposure to particulate air pollution has been associated with an increased risk of cardiovascular disease. However, the risk to welders working today remains unclear. We aimed to elucidate the cardiovascular effects of exposure to welding fumes. Methods In a cross-sectional study, structured interviews and biological sampling were conducted for 101 welders and 127 controls (all non-smoking males) from southern Sweden. Personal breathing zone sampling of respirable dust was performed. Blood pressure (BP) and endothelial function (using peripheral arterial tonometry) were measured. Plasma and serum samples were collected from peripheral blood for measurement of C-reactive protein, low-density lipoprotein, homocysteine, serum amyloid A, and cytokines. Results Welders were exposed to 10-fold higher levels of particles than controls. Welders had significantly higher BP compared to controls, an average of 5 mm Hg higher systolic and diastolic BP (P≤0.001). IL-8 was 3.4 ng/L higher in welders (P=0.010). Years working as a welder were significantly associated with increased BP (β=0.35, 95%CI 0.13 – 0.58, P=0.0024 for systolic BP; β=0.32, 95%CI 0.16 – 0.48, P<0.001 for diastolic BP, adjusted for BMI) but exposure to respirable dust was not associated with BP. No clear associations occurred between welding and endothelial function, or other effect markers. Conclusions A modest increase in BP was found among welders compared to controls suggesting that low-to-moderate exposure to welding fumes remains a risk factor for cardiovascular disease. PMID:26147298

A Cross-Sectional Study of the Cardiovascular Effects of Welding Fumes.

PubMed

Li, Huiqi; Hedmer, Maria; Kåredal, Monica; Björk, Jonas; Stockfelt, Leo; Tinnerberg, Håkan; Albin, Maria; Broberg, Karin

2015-01-01

Occupational exposure to particulate air pollution has been associated with an increased risk of cardiovascular disease. However, the risk to welders working today remains unclear. We aimed to elucidate the cardiovascular effects of exposure to welding fumes. In a cross-sectional study, structured interviews and biological sampling were conducted for 101 welders and 127 controls (all non-smoking males) from southern Sweden. Personal breathing zone sampling of respirable dust was performed. Blood pressure (BP) and endothelial function (using peripheral arterial tonometry) were measured. Plasma and serum samples were collected from peripheral blood for measurement of C-reactive protein, low-density lipoprotein, homocysteine, serum amyloid A, and cytokines. Welders were exposed to 10-fold higher levels of particles than controls. Welders had significantly higher BP compared to controls, an average of 5 mm Hg higher systolic and diastolic BP (P ≤ 0.001). IL-8 was 3.4 ng/L higher in welders (P=0.010). Years working as a welder were significantly associated with increased BP (β=0.35, 95%CI 0.13 - 0.58, P=0.0024 for systolic BP; β=0.32, 95%CI 0.16 - 0.48, P<0.001 for diastolic BP, adjusted for BMI) but exposure to respirable dust was not associated with BP. No clear associations occurred between welding and endothelial function, or other effect markers. A modest increase in BP was found among welders compared to controls suggesting that low-to-moderate exposure to welding fumes remains a risk factor for cardiovascular disease.

Cadmium Exposure and Pancreatic Cancer in South Louisiana

PubMed Central

Luckett, Brian G.; Su, L. Joseph; Rood, Jennifer C.; Fontham, Elizabeth T. H.

2012-01-01

Cadmium has been hypothesized to be a pancreatic carcinogen. We test the hypothesis that cadmium exposure is a risk factor for pancreatic cancer with a population-based case-control study sampled from a population with persistently high rates of pancreatic cancer (south Louisiana). We tested potential dietary and nondietary sources of cadmium for their association with urinary cadmium concentrations which reflect long-term exposure to cadmium due to the accumulation of cadmium in the kidney cortex. Increasing urinary cadmium concentrations were significantly associated with an increasing risk of pancreatic cancer (2nd quartile OR = 3.34, 3rd = 5.58, 4th = 7.70; test for trend P ≤ 0.0001). Potential sources of cadmium exposure, as documented in the scientific literature, found to be statistically significantly associated with increased risk of pancreatic cancer included working as a plumber, pipefitter or welder (OR = 5.88) and high consumption levels of red meat (4th quartile OR = 6.18) and grains (4th quartile OR = 3.38). Current cigarette smoking, at least 80 pack years of smoking, occupational exposure to cadmium and paints, working in a shipyard, and high consumption of grains were found to be statistically significantly associated with increased concentrations of urinary cadmium. This study provides epidemiologic evidence that cadmium is a potential human pancreatic carcinogen. PMID:23319964

29 CFR 1915.11 - Scope, application and definitions applicable to this subpart.

Code of Federal Regulations, 2014 CFR

2014-07-01

... SHIPYARD EMPLOYMENT Confined and Enclosed Spaces and Other Dangerous Atmospheres in Shipyard Employment... subpart applies to work in confined and enclosed spaces and other dangerous atmospheres in shipyard... vessels, and for cargo and miscellaneous vessels. Dangerous atmosphere means an atmosphere that may expose...

76 FR 29011 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Fire...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-19

... for OMB Review; Comment Request; Fire Protection in Shipyard Employment ACTION: Notice. SUMMARY: The... information collection request (ICR) titled, ``Fire Protection in Shipyard Employment,'' to the Office of... Fire Protection in Shipyard Employment Standard makes it mandatory for a covered employer to develop a...

Short-term metal particulate exposures decrease cardiac acceleration and deceleration capacities in welders: a repeated-measures panel study.

PubMed

Umukoro, Peter E; Cavallari, Jennifer M; Fang, Shona C; Lu, Chensheng; Lin, Xihong; Mittleman, Murray A; Christiani, David C

2016-02-01

Acceleration (AC) and deceleration (DC) capacities measure heart rate variability during speeding up and slowing down of the heart, respectively. We investigated associations between AC and DC with occupational short-term metal PM2.5 exposures. A panel of 48 male welders had particulate matter less than 2.5 microns in diameter (PM2.5) exposure measurements over 4-6 h repeated over 5 sampling periods between January 2010 and June 2012. We simultaneously obtained continuous recordings of digital ECG using a Holter monitor. We analysed ECG data in the time domain to obtain hourly AC and DC. Linear mixed models were used to assess the associations between hourly PM2.5 exposure and each of hourly AC and DC, controlling for age, smoking status, active smoking, exposure to secondhand smoke, season/time of day when ECG reading was obtained and baseline AC or DC. We also ran lagged exposure response models for each successive hour up to 3 h after onset of exposure. Mean (SD) shift PM2.5 exposure during welding was 0.47 (0.43) mg/m(3). Significant exposure-response associations were found for AC and DC with increased PM2.5 exposure. In our adjusted models without any lag between exposure and response, a 1 mg/m(3) increase of PM2.5 was associated with a decrease of 1.46 (95% CI 1.00 to 1.92) ms in AC and a decrease of 1.00 (95% CI 0.53 to 1.46) ms in DC. The effect of PM2.5 on AC and DC was maximal immediately postexposure and lasted 1 h following exposure. There are short-term effects of metal particulates on AC and DC. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Young Children's Explorations: Young Children's Research?

ERIC Educational Resources Information Center

Murray, Jane

2012-01-01

"Exploration" is recognised as research behaviour; anecdotally, as an early years' teacher, I witnessed many young children exploring. However, young children's self-initiated explorations are rarely regarded as research by adult researchers and policy-makers. The exclusion of young children's autonomous explorations from recognition as…

Survey report: control technology for autobody repair and painting shops at Church Brother's Collision Repair, Greenwood, Indiana, October 10-11, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heitbrink, W.A.; Cooper, T.C.; Edmonds, M.A.

1992-03-01

A study was made to evaluate and document the effectiveness of a metal inert gas (MIG) welder with built in ventilation to control potentially hazardous conditions at Church Brother's Collision Repair (SIC-7531), Greenwood, Indiana. Air contaminant exposures were measured during a 1 hour repair job while using a ventilated MIG welder and while using a conventional MIG welder. The ventilation system of the MIG did reduce worker exposure to welding fumes. However, the sampling was done on a single repair job, thus limiting the conclusions which can be drawn from the study. Some welding fumes were not captured by themore » ventilated welder, suggesting that the MIG with ventilation provided incomplete control of the generated fumes. In some cases the metal on the other side of the welding area became sufficiently hot to generate its own fumes. The car body itself appears to block the capture of these fumes by the ventilated MIG welder. When welding inside the car without the ventilated welder, the fumes generated were more concentrated than those generated by welding outside of the car under similar conditions. There is a decreased dilution of the fumes inside the car due to a lack of air movement. The authors conclude that while the control technique appeared to lessen exposure to welding fumes, additional investigation is needed to verify the data.« less

Assessment of occupational exposure to welding fumes by inductively coupled plasma-mass spectroscopy and by the alkaline Comet assay.

PubMed

Botta, Céline; Iarmarcovai, Gwenaëlle; Chaspoul, Florence; Sari-Minodier, Irène; Pompili, Jocelyne; Orsière, Thierry; Bergé-Lefranc, Jean-Louis; Botta, Alain; Gallice, Philippe; De Méo, Michel

2006-05-01

Welding fumes are classified as possibly carcinogenic to humans (Group 2B) by the International Agency for Research on Cancer. In the current study, blood and urine concentrations of aluminum (Al), cadmium (Cd), cobalt (Co), chromium (Cr), manganese (Mn), nickel (Ni), lead (Pb), and zinc (Zn) were monitored by inductively coupled plasma-mass spectrometry (ICP-MS) in 30 welders and in 22 controls. In addition, DNA damage was examined in the lymphocytes of these subjects by the alkaline Comet assay. Two biological samples were taken from the welders at the beginning (BW) and at the end (EW) of a work week. In controls, collection of samples was limited to BW. Blood concentrations of Cd, Co, Cr, Ni, and Pb were higher in the welders than in the control group while higher concentrations of Al, Cd, Co, Cr, Ni, and Pb were detected in welder urines. There was no significant difference in the metal concentrations for the BW and EW welder samples. Increased levels of DNA damage were found in lymphocytes from welders as compared to the controls, and 20/30 welders had higher levels of DNA lesions in the EW than in the BW samples. Age had a significant effect on DNA damage in the control group. Spearman's rank correlation analysis indicated that there were positive correlations between blood concentrations of Al, Co, Ni, and Pb and the levels of DNA damage. A negative correlation was found between DNA damage and Mn in blood, while there was a positive correlation between urinary Mn concentration and DNA damage. These data indicate that occupational exposure to welding fumes increases DNA damage in lymphocytes. Copyright (c) 2006 Wiley-Liss, Inc.

49 CFR 195.222 - Welders: Qualification of welders.

Code of Federal Regulations, 2011 CFR

2011-10-01

... be qualified in accordance with section 6 of API 1104 (incorporated by reference, see § 195.3) or... and found acceptable under section 9 of API 1104 (incorporated by reference, see § 195.3). [Amdt. 195...

49 CFR 195.222 - Welders: Qualification of welders.

Code of Federal Regulations, 2014 CFR

2014-10-01

... be qualified in accordance with section 6 of API 1104 (incorporated by reference, see § 195.3) or... and found acceptable under section 9 of API 1104 (incorporated by reference, see § 195.3). [Amdt. 195...

49 CFR 195.222 - Welders: Qualification of welders.

Code of Federal Regulations, 2012 CFR

2012-10-01

... be qualified in accordance with section 6 of API 1104 (incorporated by reference, see § 195.3) or... and found acceptable under section 9 of API 1104 (incorporated by reference, see § 195.3). [Amdt. 195...

49 CFR 195.222 - Welders: Qualification of welders.

Code of Federal Regulations, 2013 CFR

2013-10-01

... be qualified in accordance with section 6 of API 1104 (incorporated by reference, see § 195.3) or... and found acceptable under section 9 of API 1104 (incorporated by reference, see § 195.3). [Amdt. 195...

29 CFR 1926.406 - Specific purpose equipment and installations.

Code of Federal Regulations, 2013 CFR

2013-07-01

...—disconnecting means—(1) Motor-generator, AC transformer, and DC rectifier arc welders. A disconnecting means shall be provided in the supply circuit for each motor-generator arc welder, and for each AC transformer...

29 CFR 1926.406 - Specific purpose equipment and installations.

Code of Federal Regulations, 2012 CFR

2012-07-01

...—disconnecting means—(1) Motor-generator, AC transformer, and DC rectifier arc welders. A disconnecting means shall be provided in the supply circuit for each motor-generator arc welder, and for each AC transformer...

Stainless steel welding and semen quality.

PubMed

Jelnes, J E; Knudsen, L E

1988-01-01

Questionnaire studies of patients from fertility clinics suggest that welders may have an increased risk of reduced semen quality. In this study, welders and nonwelders from the same plants were asked to provide blood, urine, and semen samples. Urine was analyzed for chromium and nickel, and for mutagenic activity and metal concentration; blood for metal concentrations, immunoglobulin G, total protein, and measures of genotoxicity in lymphocytes; and semen was evaluated by standard semen analysis. Results of the semen evaluation, presented here, showed no difference in semen quality between welders and nonwelders. Because the metal dust exposure of nonwelders in the plant may be higher than that in the general population, welders were also compared to referents not working in the metal industry. Again, no decrease in semen quality associated with welding was demonstrated.

New business opportunity: Green field project with new technology

NASA Astrophysics Data System (ADS)

Lee, Seung Jae; Woo, Jong Hun; Shin, Jong Gye

2014-06-01

Since 2009 of global financial crisis, shipbuilding industry has undergone hard times seriously. After such a long depression, the latest global shipping market index shows that the economic recovery of global shipbuilding market is underway. Especially, nations with enormous resources are going to increase their productivity or expanding their shipyards to accommodate a large amount of orders expected in the near future. However, few commercial projects have been carried out for the practical shipyard layout designs even though those can be good commercial opportunities for shipbuilding engineers. Shipbuilding starts with a shipyard construction with a large scale investment initially. Shipyard design and the equipment layout problem, which is directly linked to the productivity of ship production, is an important issue in the production planning of mass production of ships. In many cases, shipbuilding yard design has relied on the experience of the internal engineer, resulting in sporadic and poorly organized processes. Consequently, economic losses and the trial and error involved in such a design process are inevitable problems. The starting point of shipyard construction is to design a shipyard layout. Four kinds of engineering parts required for the shipyard layout design and construction. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is used as a foundation of the other engineering parts, and also, determines the shipyard capacity in the shipyard lifecycle. In this paper, the background of shipbuilding industry is explained in terms of engineering works for the recognition of the macro trend. Nextly, preliminary design methods and related case study is introduced briefly by referencing the previous research. Lastly, the designed work of layout design is validated using the computer simulation technology.

Acute respiratory effects and biomarkers of inflammation due to welding-derived nanoparticle aggregates.

PubMed

Dierschke, Katrin; Isaxon, Christina; Andersson, Ulla B K; Assarsson, Eva; Axmon, Anna; Stockfelt, Leo; Gudmundsson, Anders; Jönsson, Bo A G; Kåredal, Monica; Löndahl, Jakob; Pagels, Joakim; Wierzbicka, Aneta; Bohgard, Mats; Nielsen, Jörn

2017-07-01

Welders are exposed to airborne particles from the welding environment and often develop symptoms work-related from the airways. A large fraction of the particles from welding are in the nano-size range. In this study we investigate if the welders' airways are affected by exposure to particles derived from gas metal arc welding in mild steel in levels corresponding to a normal welding day. In an exposure chamber, 11 welders with and 10 welders without work-related symptoms from the lower airways and 11 non-welders without symptoms, were exposed to welding fumes (1 mg/m 3 ) and to filtered air, respectively, in a double-blind manner. Symptoms from eyes and upper and lower airways and lung function were registered. Blood and nasal lavage (NL) were sampled before, immediately after and the morning after exposure for analysis of markers of oxidative stress. Exhaled breath condensate (EBC) for analysis of leukotriene B4 (LT-B4) was sampled before, during and immediately after exposure. No adverse effects of welding exposure were found regarding symptoms and lung function. However, EBC LT-B4 decreased significantly in all participants after welding exposure compared to filtered air. NL IL-6 increased immediately after exposure in the two non-symptomatic groups and blood neutrophils tended to increase in the symptomatic welder group. The morning after, neutrophils and serum IL-8 had decreased in all three groups after welding exposure. Remarkably, the symptomatic welder group had a tenfold higher level of EBC LT-B4 compared to the two groups without symptoms. Despite no clinical adverse effects at welding, changes in inflammatory markers may indicate subclinical effects even at exposure below the present Swedish threshold limit (8 h TWA respirable dust).

State-of-the-science review: Does manganese exposure during welding pose a neurological risk?

PubMed

Santamaria, Annette B; Cushing, Colleen A; Antonini, James M; Finley, Brent L; Mowat, Fionna S

2007-01-01

Recent studies report that exposure to manganese (Mn), an essential component of welding electrodes and some steels, results in neurotoxicity and/or Parkinson's disease (PD) in welders. This "state-of-the-science" review presents a critical analysis of the published studies that were conducted on a variety of Mn-exposed occupational cohorts during the last 100 yr, as well as the regulatory history of Mn and welding fumes. Welders often perform a variety of different tasks with varying degrees of duration and ventilation, and hence, to accurately assess Mn exposures that occurred in occupational settings, some specific information on the historical work patterns of welders is desirable. This review includes a discussion of the types of exposures that occur during the welding process--for which limited information relating airborne Mn levels with specific welding activities exists--and the human health studies evaluating neurological effects in welders and other Mn-exposed cohorts, including miners, millers, and battery workers. Findings and implications of studies specifically conducted to evaluate neurobehavioral effects and the prevalence of PD in welders are also discussed. Existing exposure data indicate that, in general, Mn exposures in welders are less than those associated with the reports of clinical neurotoxicity (e.g., "manganism") in miners and smelter workers. It was also found that although manganism was observed in highly exposed workers, the scant exposure-response data available for welders do not support a conclusion that welding is associated with clinical neurotoxicity. The available data might support the development of reasonable "worst-case" exposure estimates for most welding activities, and suggest that exposure simulation studies would significantly refine such estimates. Our review ends with a discussion of the data gaps and areas for future research.

Derivation of an occupational exposure level for manganese in welding fumes.

PubMed

Bailey, Lisa A; Kerper, Laura E; Goodman, Julie E

2018-01-01

Exposure to high levels of manganese (Mn) in occupational settings is known to lead to adverse neurological effects. Since Mn is an essential nutrient, there are mechanisms that maintain its homeostatic control in the body, and there is some level of Mn in air that does not perturb Mn homeostasis. However, the Mn exposure concentrations at which no adverse effects are expected in occupational settings vary considerably across regulatory agencies. We set out to derive a Mn Occupational Exposure Level (OEL) for welders based on a review of studies that evaluated Mn exposure concentrations from welding fumes and: (1) neurological effects in welders; (2) levels of Mn in the brains of welders (via pallidal index [PI] estimated from magnetic resonance imaging [MRI]); (3) other biomarkers of Mn exposure in welders (i.e., blood and urine); and (4) Mn brain concentrations, PI, and corresponding neurological effects in non-human primates. Our analysis suggests uncertainty in quantifying dose-response associations for Mn from many of the occupational welding studies. The few welding studies that adequately estimate exposure suggest a possible OEL of 100-140μg/m 3 for respirable Mn. This range is consistent with other epidemiology studies, studies of biomarkers of Mn exposure in welders, and with studies in non-human primates, though future studies could provide a stronger basis for deriving a Mn occupational guideline for welders. Copyright © 2017 Elsevier B.V. All rights reserved.

A review of historical exposures to asbestos among skilled craftsmen (1940-2006).

PubMed

Williams, Pamela R D; Phelka, Amanda D; Paustenbach, Dennis J

2007-01-01

This article provides a review and synthesis of the published and selected unpublished literature on historical asbestos exposures among skilled craftsmen in various nonshipyard and shipyard settings. The specific crafts evaluated were insulators, pipefitters, boilermakers, masons, welders, sheet-metal workers, millwrights, electricians, carpenters, painters, laborers, maintenance workers, and abatement workers. Over 50 documents were identified and summarized. Sufficient information was available to quantitatively characterize historical asbestos exposures for the most highly exposed workers (insulators), even though data were lacking for some job tasks or time periods. Average airborne fiber concentrations collected for the duration of the task and/or the entire work shift were found to range from about 2 to 10 fibers per cubic centimeter (cm3 or cc) during activities performed by insulators in various nonshipyard settings from the late 1960s and early 1970s. Higher exposure levels were observed for this craft during the 1940s to 1950s, when dust counts were converted from millions of particles per cubic foot (mppcf) to units of fibers per cubic centimeter (fibers/cc) using a 1:6 conversion factor. Similar tasks performed in U.S. shipyards yielded average fiber concentrations about two-fold greater, likely due to inadequate ventilation and confined work environments; however, excessively high exposure levels were reported in some British Naval shipyards due to the spraying of asbestos. Improved industrial hygiene practices initiated in the early to mid-1970s were found to reduce average fiber concentrations for insulator tasks approximately two- to five-fold. For most other crafts, average fiber concentrations were found to typically range from <0.01 to 1 fibers/cc (depending on the task or time period), with higher concentrations observed during the use of powered tools, the mixing or sanding of drywall cement, and the cleanup of asbestos insulation or lagging

Lung asbestos burden in shipyard and construction workers with mesothelioma: Comparison with burdens in subjects with asbestosis of lung cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warnock, M.L.

1989-10-01

Although mesothelioma is generally considered to be caused by asbestos, epidemiologic studies indicate that some cases have another cause. In order to determine whether pulmonary asbestos burden can be used to define asbestos-related mesotheliomas, asbestos burden was quantified in 27 shipyard or construction workers with diffuse malignant mesothelioma of the pleura or peritoneum and a history of asbestos exposure. Their burden was significantly greater than the burden found in 19 unexposed men. The burdens were also compared to those of previously reported subjects with asbestosis or lung cancer. The median concentration for total amphibole fibers (2.7 million/g dry lung) inmore » subjects with mesothelioma did not differ significantly from our previously reported median values for 14 subjects with asbestosis (1.3 million/g dry lung) or for 60 asbestos workers with lung cancer (1.3 million/g dry lung). Fiber size distribution for amosite, the most prevalent fiber type, was similar in all three subject groups. Fifteen of 25 (60%) subjects with mesothelioma had mild asbestosis. Asbestos body (AB) concentrations were {ge} 1900/g dry lung, and total amphibole fiber concentrations were {ge}390,000/g dry lung. Counts of ABs{ge}0.5/cm{sup 2} in histologic sections always signified both of these concentrations in extracts. Thus, histologic sections showing {ge}0.5 ABs/cm{sup 2} or extracts containing asbestos body or amphibole fiber concentrations of at least 1900 or 390,000/g dry lung, respectively, will confirm an asbestos related mesothelioma.« less

A Fog Computing Based Cyber-Physical System for the Automation of Pipe-Related Tasks in the Industry 4.0 Shipyard.

PubMed

Fernández-Caramés, Tiago M; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Díaz-Bouza, Manuel A

2018-06-17

Pipes are one of the key elements in the construction of ships, which usually contain between 15,000 and 40,000 of them. This huge number, as well as the variety of processes that may be performed on a pipe, require rigorous identification, quality assessment and traceability. Traditionally, such tasks have been carried out by using manual procedures and following documentation on paper, which slows down the production processes and reduces the output of a pipe workshop. This article presents a system that allows for identifying and tracking the pipes of a ship through their construction cycle. For such a purpose, a fog computing architecture is proposed to extend cloud computing to the edge of the shipyard network. The system has been developed jointly by Navantia, one of the largest shipbuilders in the world, and the University of A Coruña (Spain), through a project that makes use of some of the latest Industry 4.0 technologies. Specifically, a Cyber-Physical System (CPS) is described, which uses active Radio Frequency Identification (RFID) tags to track pipes and detect relevant events. Furthermore, the CPS has been integrated and tested in conjunction with Siemens’ Manufacturing Execution System (MES) (Simatic IT). The experiments performed on the CPS show that, in the selected real-world scenarios, fog gateways respond faster than the tested cloud server, being such gateways are also able to process successfully more samples under high-load situations. In addition, under regular loads, fog gateways react between five and 481 times faster than the alternative cloud approach.

Constructing "Normal Childhoods": Young People Talk about Young Carers

ERIC Educational Resources Information Center

O'Dell, L.; Crafter, S.; de Abreu, G.; Cline, T.

2010-01-01

There has been a great deal of attention paid to young carers in recent research, social policy and service provision. In this paper we report on a survey and interview study of 46 young people aged 15 to 18, nine of whom had experience as young carers, to explore the ways in which young people construct the young carer and their disabled parent.…

Influence of welding fume on systemic iron status.

PubMed

Casjens, Swaantje; Henry, Jana; Rihs, Hans-Peter; Lehnert, Martin; Raulf-Heimsoth, Monika; Welge, Peter; Lotz, Anne; Gelder, Rainer Van; Hahn, Jens-Uwe; Stiegler, Hugo; Eisele, Lewin; Weiss, Tobias; Hartwig, Andrea; Brüning, Thomas; Pesch, Beate

2014-11-01

Iron is the major metal found in welding fumes, and although it is an essential trace element, its overload causes toxicity due to Fenton reactions. To avoid oxidative damage, excess iron is bound to ferritin, and as a result, serum ferritin (SF) is a recognized biomarker for iron stores, with high concentrations linked to inflammation and potentially also cancer. However, little is known about iron overload in welders. Within this study, we assessed the iron status and quantitative associations between airborne iron, body iron stores, and iron homeostasis in 192 welders not wearing dust masks. Welders were equipped with personal samplers in order to determine the levels of respirable iron in the breathing zone during a working shift. SF, prohepcidin and other markers of iron status were determined in blood samples collected after shift. The impact of iron exposure and other factors on SF and prohepcidin were estimated using multiple regression models. Our results indicate that respirable iron is a significant predictor of SF and prohepcidin. Concentrations of SF varied according to the welding technique and respiratory protection used, with a median of 103 μg l(-1) in tungsten inert gas welders, 125 μg l(-1) in those wearing air-purifying respirators, and 161 μg l(-1) in other welders. Compared to welders with low iron stores (SF < 25 μg l(-1)), those with excess body iron (SF ≥ 400 μg l(-1)) worked under a higher median concentration of airborne iron (60 μg m(-3) versus 148 μg m(-3)). Even though air concentrations of respirable iron and manganese were highly correlated, and low iron stores have been reported to increase manganese uptake in the gastrointestinal tract, no correlation was seen between SF and manganese in blood. In conclusion, monitoring SF may be a reasonable method for health surveillance of welders. Respiratory protection with air-purifying respirators can decrease iron exposure and avoid chronically higher SF in welders working with

Risk of lung cancer according to mild steel and stainless steel welding.

PubMed

Sørensen, Anita Rath; Thulstrup, Ane Marie; Hansen, Johnni; Ramlau-Hansen, Cecilia Høst; Meersohn, Andrea; Skytthe, Axel; Bonde, Jens Peter

2007-10-01

Whether the elevated risk of lung cancer observed among welders is caused by welding emissions or by confounding from smoking or asbestos exposure is still not resolved. This question was addressed in a cohort with a long follow-up and quantified estimates of individual exposure to welding fume particulates. Male metal workers employed at least 1 year at one or more Danish stainless or mild steel industrial companies from 1964 through 1984 were enrolled in a cohort. Data on occupational and smoking history were obtained by questionnaire in 1986. Welders in the cohort who started welding in 1960 or later (N=4539) were followed from April 1968 until December 2003, when information on cancer diagnosis was obtained from the Danish Cancer Registry. During the follow-up, 75 cases of primary lung cancer were identified. Lifetime accumulated exposure to welding fume particulates was estimated by combining questionnaire information and more than 1000 welding-process-specific measurements of fume particulates in the Danish welding industry. The standardized incidence ratio (SIR) for lung cancer was increased among the welders [SIR 1.35, 95% confidence interval (95% CI) 1.06-1.70)]. Among the stainless steel welders, the risk increased significantly with increasing accumulative welding particulate exposure, while no exposure-response relation was found for mild steel welders, even after adjustment for tobacco smoking and asbestos exposure. The study corroborates earlier findings that welders have an increased risk of lung cancer. While exposure-response relations indicate carcinogenic effects related to stainless steel welding, it is still unresolved whether the mild steel welding process carries a carcinogenic risk.

Lung cancer risk in welders and foundry workers with a history of heavy smoking in the USA: The National Lung Screening Trial.

PubMed

Wong, Jason Y Y; Bassig, Bryan A; Seow, Wei Jie; Hu, Wei; Ji, Bu-Tian; Blair, Aaron; Silverman, Debra T; Lan, Qing

2017-06-01

Foundry work is a risk factor for lung cancer; however, the association with welding is unclear, as smoking is common among metalworkers and may mask the relationship. We evaluated whether history of welding and foundry work, independently and jointly, and employment duration were associated with lung cancer risk in heavy smokers. We analysed data from the National Lung Screening Trial, a prospective randomised trial of 53 454 heavy smokers (>30 pack-years) in the USA. Cox regression models were used to estimate the HRs and 95% CIs of medically/histologically confirmed incident lung cancer during the follow-up period (2002-2009) in relation to history and duration of welding and foundry work assessed via questionnaires, adjusted for screening arm, component study, sex, age, race/ethnicity, education, smoking status and pack-years, body mass index and personal/family medical history. There were 2034 incident lung cancer cases throughout the follow-up. Increasing years of employment in welding (p-trend =0.039) and foundry work (p-trend =0.005) were related to increased lung cancer risk among heavy smokers. Having ever been employed (≥1 yr) as either a welder or foundry worker alone was associated with non-significant increased risks of lung cancer (HR=1.12 (95% CI 0.91 to 1.37) and HR=1.09 (95% CI 0.85 to 1.39), respectively). Further, there was a joint-effect in that those who were ever employed in both occupations had significantly increased risks (HR=1.48 (95% CI 1.08 to 2.04)). Our findings provide further evidence that exposure to welding/metal fumes may be associated with elevated lung cancer risk. NCT00047385. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Alternating-Polarity Arc Welding

NASA Technical Reports Server (NTRS)

Schwinghamer, R. J.

1987-01-01

Brief reversing polarity of welding current greatly improves quality of welds. NASA technical memorandum recounts progress in art of variable-polarity plasma-arc (VPPA) welding, with emphasis on welding of aluminum-alloy tanks. VPPA welders offer important advantages over conventional single-polarity gas/tungsten arc welders.

Productivity, or quality of work as the decisive factor in marketing ergonomics? Design considerations for a new ergonomic welding-table.

PubMed

van der Veen, F; Regensburg, R E

1990-04-01

Quality tools should be designed from the starting point of adjusting tasks and equipment to human possibilities and limitations. Companies should consider an investment in ergonomic equipment as a profitable addition to indispensable productive machinery. As an example to support this statement, the authors describe the health risks of welders and the possible solutions. As the result of investigations a list of requirements was drafted for a product that would have less of the disadvantages of the products mentioned. The designed product, the 'ergonomic welding-table', aims to be a quality tool for welders working at small and medium-sized tasks. The product consists of a cabin (2.35 m wide) with a built-in ventilator for very efficient welding-fume extraction (90%-95%). Welders can set their preferred working height at any time. Another advantage is the option of performing the welding task while standing or sitting. The results of user-evaluation among welders and purchasers indicates considerable satisfaction.

Weld arc simulator

DOEpatents

Burr, Melvin J.

1990-01-30

An arc voltage simulator for an arc welder permits the welder response to a variation in arc voltage to be standardized. The simulator uses a linear potentiometer connected to the electrode to provide a simulated arc voltage at the electrode that changes as a function of electrode position.

[Analysis of methods for measurement and assessment of occupational exposure to electromagnetic fields in dielectric heating].

PubMed

Aniołczyk, Halina; Mamrot, Paweł; Mariańska, Magda

2012-01-01

High-frequency (HF) welders are the most common devices that make use of dielectric heating. They are a source of high-intensity electromagnetic fields (EMFs). Manual operation of those welders makes that the limbs are exposed to EMFs of extremely high intensity, far in excess of the currently admissible values. The aim of this study was to update knowledge of actual exposure of HF welder operators to EMF and to optimize the procedure of exposure assessment. Measurements of the EMF intensity in the vicinity of 10 dielectric welders at work posts of 12 operators were performed. EMF measurements were made using the reference method, extended by auxiliary measurement points to measure induced currents I(L) in the limbs. Induced current measurements were performed in 20 operators tending the same HF welder. the highest values of the electric (E) and magnetic (H) fields measured at work posts were for whole body: E, up to 350 V/m, and H, up to 1.00 A/m; and for limbs: E, up to 600 V/m and H, up to 3.30 A/m. The W exposure indicator in the primary vertical measurement points was almost as high as 60. I(L) values measured at the wrist exceeded 64 mA and were individual-operator-dependent. EMF exposure of 25% of HF welder operators exceeded the national admissible values and after taking into account the operators' hands, this figure rose to 50%. The measured value of I(L), representing a measure of internal exposure to EMF, should serve as the main criterion in deciding whether working conditions are admissible.

75 FR 35090 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... workgroup reports: arc flash guidance; fall protection in commercial fishing; ventilation for welding and allied operations in shipyards; eye protection against radiant energy for welding in shipyards...

Don Young | NREL

Science.gov Websites

Don Young Don Young Professional IV-ESH Don.Young@nrel.gov | 303-384-7144 Don Young is an EHS Professional at the NWTC. He received his B.S. from Colorado State University in Biological Science before

Exposure to welding fumes is associated with hypomethylation of the F2RL3 gene: a cardiovascular disease marker

PubMed Central

Hossain, Mohammad B; Li, Huiqi; Hedmer, Maria; Tinnerberg, Håkan; Albin, Maria; Broberg, Karin

2015-01-01

Background Welders are at risk for cardiovascular disease. Recent studies linked tobacco smoke exposure to hypomethylation of the F2RL3 (coagulation factor II (thrombin) receptor-like 3) gene, a marker for cardiovascular disease prognosis and mortality. However, whether welding fumes cause hypomethylation of F2RL3 remains unknown. Methods We investigated 101 welders (median span of working as a welder: 7 years) and 127 unexposed controls (non-welders with no obvious exposure to respirable dust at work), age range 23–60 years, all currently non-smoking, in Sweden. The participants were interviewed about their work history, lifestyle factors and diseases. Personal sampling of respirable dust was performed for the welders. DNA methylation of F2RL3 in blood was assessed by pyrosequencing of four CpG sites, CpG_2 (corresponds to cg03636183) to CpG_5, in F2RL3. Multivariable linear regression analysis was used to assess the association between exposure to welding fumes and F2RL3 methylation. Results Welders had 2.6% lower methylation of CpG_5 than controls (p<0.001). Higher concentrations of measured respirable dust among the welders were associated with hypomethylation of CpG_2, CpG_4 and CpG_5 (β=−0.49 to −1.4, p<0.012); p<0.029 adjusted for age, previous smoking, passive smoking, education, current residence and respirator use. Increasing the number of years working as a welder was associated with hypomethylation of CpG_4 (linear regression analysis, β=−0.11, p=0.039, adjusted for previous smoking). Previous tobacco smokers had 1.5–4.7% (p<0.014) lower methylation of 3 of the 4 CpG sites in F2RL3 (CpG_2, CpG_4 and CpG_5) compared to never-smokers. A non-significant lower risk of cardiovascular disease with more methylation was observed for all CpG sites. Conclusions Welding fumes exposure and previous smoking were associated with F2RL3 hypomethylation. This finding links low-to-moderate exposure to welding fumes to adverse effects on the cardiovascular

Exposure to welding fumes is associated with hypomethylation of the F2RL3 gene: a cardiovascular disease marker.

PubMed

Hossain, Mohammad B; Li, Huiqi; Hedmer, Maria; Tinnerberg, Håkan; Albin, Maria; Broberg, Karin

2015-12-01

Welders are at risk for cardiovascular disease. Recent studies linked tobacco smoke exposure to hypomethylation of the F2RL3 (coagulation factor II (thrombin) receptor-like 3) gene, a marker for cardiovascular disease prognosis and mortality. However, whether welding fumes cause hypomethylation of F2RL3 remains unknown. We investigated 101 welders (median span of working as a welder: 7 years) and 127 unexposed controls (non-welders with no obvious exposure to respirable dust at work), age range 23-60 years, all currently non-smoking, in Sweden. The participants were interviewed about their work history, lifestyle factors and diseases. Personal sampling of respirable dust was performed for the welders. DNA methylation of F2RL3 in blood was assessed by pyrosequencing of four CpG sites, CpG_2 (corresponds to cg03636183) to CpG_5, in F2RL3. Multivariable linear regression analysis was used to assess the association between exposure to welding fumes and F2RL3 methylation. Welders had 2.6% lower methylation of CpG_5 than controls (p<0.001). Higher concentrations of measured respirable dust among the welders were associated with hypomethylation of CpG_2, CpG_4 and CpG_5 (β=-0.49 to -1.4, p<0.012); p<0.029 adjusted for age, previous smoking, passive smoking, education, current residence and respirator use. Increasing the number of years working as a welder was associated with hypomethylation of CpG_4 (linear regression analysis, β=-0.11, p=0.039, adjusted for previous smoking). Previous tobacco smokers had 1.5-4.7% (p<0.014) lower methylation of 3 of the 4 CpG sites in F2RL3 (CpG_2, CpG_4 and CpG_5) compared to never-smokers. A non-significant lower risk of cardiovascular disease with more methylation was observed for all CpG sites. Welding fumes exposure and previous smoking were associated with F2RL3 hypomethylation. This finding links low-to-moderate exposure to welding fumes to adverse effects on the cardiovascular system, and suggests a potential mechanistic

32 CFR 770.54 - Background.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ACCESS TO PARTICULAR INSTALLATIONS Entry Regulations for Portsmouth Naval Shipyard, Portsmouth, New Hampshire § 770.54 Background. (a) Portsmouth Naval Shipyard maintains and operates facilities “to provide...

32 CFR 770.54 - Background.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ACCESS TO PARTICULAR INSTALLATIONS Entry Regulations for Portsmouth Naval Shipyard, Portsmouth, New Hampshire § 770.54 Background. (a) Portsmouth Naval Shipyard maintains and operates facilities “to provide...

32 CFR 770.54 - Background.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ACCESS TO PARTICULAR INSTALLATIONS Entry Regulations for Portsmouth Naval Shipyard, Portsmouth, New Hampshire § 770.54 Background. (a) Portsmouth Naval Shipyard maintains and operates facilities “to provide...

32 CFR 770.54 - Background.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ACCESS TO PARTICULAR INSTALLATIONS Entry Regulations for Portsmouth Naval Shipyard, Portsmouth, New Hampshire § 770.54 Background. (a) Portsmouth Naval Shipyard maintains and operates facilities “to provide...

Development and Implementation of Domain Referenced Testing in Vocational Welding. Final Report.

ERIC Educational Resources Information Center

Sterrett, Dan

A project was undertaken to develop and implement domain-referenced tests (DRTs) for welders' helpers. After analyzing the results of a state survey of welding job titles and related tasks and after consulting with postsecondary educators and industry personnel, researchers developed DRTs to measure various tasks typically performed by welders.…

View westsouthwest of marine railway at reserve basin of Philadelphia ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View west-southwest of marine railway at reserve basin of Philadelphia Naval Shipyard. - Naval Base Philadelphia-Philadelphia Naval Shipyard, Reserve Basin & Marine Railway, League Island, Philadelphia, Philadelphia County, PA

32 CFR 770.58 - Violations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ACCESS TO PARTICULAR INSTALLATIONS Entry Regulations for Portsmouth Naval Shipyard, Portsmouth, New Hampshire § 770.58 Violations. (a) Any person entering or remaining on Portsmouth Naval Shipyard without the...

32 CFR 770.58 - Violations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ACCESS TO PARTICULAR INSTALLATIONS Entry Regulations for Portsmouth Naval Shipyard, Portsmouth, New Hampshire § 770.58 Violations. (a) Any person entering or remaining on Portsmouth Naval Shipyard without the...

32 CFR 770.58 - Violations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ACCESS TO PARTICULAR INSTALLATIONS Entry Regulations for Portsmouth Naval Shipyard, Portsmouth, New Hampshire § 770.58 Violations. (a) Any person entering or remaining on Portsmouth Naval Shipyard without the...

32 CFR 770.58 - Violations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ACCESS TO PARTICULAR INSTALLATIONS Entry Regulations for Portsmouth Naval Shipyard, Portsmouth, New Hampshire § 770.58 Violations. (a) Any person entering or remaining on Portsmouth Naval Shipyard without the...

32 CFR 770.58 - Violations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ACCESS TO PARTICULAR INSTALLATIONS Entry Regulations for Portsmouth Naval Shipyard, Portsmouth, New Hampshire § 770.58 Violations. (a) Any person entering or remaining on Portsmouth Naval Shipyard without the...

Weighing the evidence of ecological risk from chemical contamination in the estuarine environment adjacent to the Portsmouth Naval Shipyard, Kittery, Maine, USA.

PubMed

Johnston, Robert K; Munns, Wayne R; Tyler, Patti Lynne; Marajh-Whittemore, Patty; Finkelstein, Kenneth; Munney, Kenneth; Short, Fred T; Melville, Ann; Hahn, Simeon P

2002-01-01

In characterizing ecological risks, considerable consensus building and professional judgments are required to develop conclusions about risk. This is because how to evaluate all the factors that determine ecological risk is not well defined and is subject to interpretation. Here we report on the application of a procedure to weigh the evidence of ecological risk and develop conclusions about risk that will incorporate the strengths and weaknesses of the assessment. The procedure was applied to characterize ecological risk of chemical contamination in nearshore areas adjacent to the Portsmouth Naval Shipyard, located at the mouth of the Great Bay Estuary, New Hampshire and Maine, USA. Measures of exposure and effect were used to interpret the magnitude of risk to the assessment endpoints of pelagic species, epibenthic species, the benthic community, eelgrass plants, the salt marsh community, and avian receptors. The evidence of chemical exposure from water, sediment, and tissue and the evidence of biological effects to representative pelagic, epibenthic, benthic, eelgrass, salt marsh, and avian species were weighed to characterize ecological risk. Individual measures were weighted by the quality and reliability of their data and risk was estimated from the preponderance, magnitude, extent, and strength of causal relationships between the data on exposure and effects. Relating evidence of risk to hypothesized pathways of exposure made it possible to estimate the magnitude of risk from sediment and water and express the confidence associated with the findings. Systematically weighing the evidence of risk rendered conclusions about risk in a manner that was clearly defined, objective, consistent, and did not rely solely on professional judgment.

4. VIEW NORTHSOUTHERN END OF WEST ELEVATION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. VIEW NORTH-SOUTHERN END OF WEST ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD MACHINE SHOP. - Bethlehem Steel Company Shipyard, Machine Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

2. VIEW NORTHEASTSOUTHERN END OF WEST ELEVATION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW NORTHEAST-SOUTHERN END OF WEST ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD MACHINE SHOP. - Bethlehem Steel Company Shipyard, Machine Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

Heart rate variability and DNA methylation levels are altered after short-term metal fume exposure among occupational welders: a repeated-measures panel study.

PubMed

Fan, Tianteng; Fang, Shona C; Cavallari, Jennifer M; Barnett, Ian J; Wang, Zhaoxi; Su, Li; Byun, Hyang-Min; Lin, Xihong; Baccarelli, Andrea A; Christiani, David C

2014-12-16

In occupational settings, boilermakers are exposed to high levels of metallic fine particulate matter (PM2.5) generated during the welding process. The effect of welding PM2.5 on heart rate variability (HRV) has been described, but the relationship between PM2.5, DNA methylation, and HRV is not known. In this repeated-measures panel study, we recorded resting HRV and measured DNA methylation levels in transposable elements Alu and long interspersed nuclear element-1 (LINE-1) in peripheral blood leukocytes under ambient conditions (pre-shift) and right after a welding task (post-shift) among 66 welders. We also monitored personal PM2.5 level in the ambient environment and during the welding procedure. The concentration of welding PM2.5 was significantly higher than background levels in the union hall (0.43 mg/m3 vs. 0.11 mg/m3, p < 0.0001). The natural log of transformed power in the high frequency range (ln HF) had a significantly negative association with PM2.5 exposure (β = -0.76, p = 0.035). pNN10 and pNN20 also had a negative association with PM2.5 exposure (β = -0.16%, p = 0.006 and β = -0.13%, p = 0.030, respectively). PM2.5 was positively associated with LINE-1 methylation [β = 0.79%, 5-methylcytosince (%mC), p = 0.013]; adjusted for covariates. LINE-1 methylation did not show an independent association with HRV. Acute decline of HRV was observed following exposure to welding PM2.5 and evidence for an epigenetic response of transposable elements to short-term exposure to high-level metal-rich particulates was reported.

29. VIEW SHOWING WEST APPROACH OF BRIDGE, LOOKING WEST. No ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. VIEW SHOWING WEST APPROACH OF BRIDGE, LOOKING WEST. No date. (The field welding was by the Teleweld Corporation of Chicago, with four Lincoln welders from Tuesday, April 19 to Monday, May 16, 1949. 528 man hours of welders' time) - Benton Street Bridge, Spanning Iowa River at Benton Street, Iowa City, Johnson County, IA

Automatic welding systems gain world-wide acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ives, G. Jr.

1979-04-01

Five automatic welding systems are currently available for commercial use, marketed by three US companies - CRC Automatic Welding Co., H.C. Price Co., and Diametrics Inc. - as well as by Belgium's S.A. Arcos Co. (the Orbimatic welding device) and France's Societe Serimer. The pioneer and leader of the field, CRC has served on 52 projects since 1969, including the 56-in. Orenburg line in the USSR. In comparison, the other systems have seen only limited activity. The Orbimatic welder has been used in the Netherlands and other Western European countries on projects with up to 42-in.-diameter pipe. The H.C. Pricemore » welder proved successful in North Sea construction and last year in Mexico's Troncal Sistema Nacional de Gas. The Diametrics welder relies on the electric flash-butt system used on large-diameter projects in the USSR. The most recent entry into the commerical market, France's Serimer completed field testing last year. Four other welders have recently been announced but are not yet commercially available.« less

7. VIEW WESTCHARACTERISTIC DOOR AND WINDOW OPENINGS IN EAST ELEVATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW WEST-CHARACTERISTIC DOOR AND WINDOW OPENINGS IN EAST ELEVATION OF THE BETHLEHEM STEEL COMPANY SHIPYARD MACHINE SHOP. - Bethlehem Steel Company Shipyard, Machine Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

32 CFR 770.49 - Background.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Washington § 770.49 Background. (a) Puget Sound Naval Shipyard is a major naval ship repair facility, with... interruption. Additionally, most of Puget Sound Naval Shipyard is dedicated to heavy industrial activity where...

Apparatus for the concurrent inspection of partially completed welds

DOEpatents

Smartt, Herschel B.; Johnson, John A.; Larsen, Eric D.; Bitsoi, Rodney J.; Perrenoud, Ben C.; Miller, Karen S.; Pace, David P.

2002-01-01

An apparatus for the concurrent inspection of partially completed welds is described in which is utilized in combination with a moveable welder for forming a partially completed weld, and an ultrasonic generator mounted on a moveable welder in which is reciprocally moveable along a path of travel which is laterally disposed relative to the partially completed weld.

46 CFR 296.60 - Applications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... additional vessel maintenance and repair preparation costs, including costs for additional engineering...” for transit to a U.S. shipyard in excess of the transit period to a foreign shipyard on the same trade...

6. VIEW WESTINTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. VIEW WEST-INTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

7. VIEW EASTINTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW EAST-INTERIOR OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

8. VIEW EASTINTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. VIEW EAST-INTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

9. VIEW WESTINTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. VIEW WEST-INTERIOR OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

James L. Young | NREL

Science.gov Websites

L. Young James Young Postdoctoral Researcher-Chemistry James.Young@nrel.gov | 303-275-4456 Orcid ID http://orcid.org/0000-0001-7291-0079 Dr. James L. Young is a Postdoctoral Researcher at the National -splitting photocathode," Nature Energy (2017). View all NREL publications for James L. Young.

2. VIEW SOUTHWESTNORTH ELEVATION OF BOILER SHOP SECTION OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW SOUTHWEST-NORTH ELEVATION OF BOILER SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

3. VIEW SOUTHNORTH ELEVATION OF BLACKSMITH SHOP SECTION OF THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW SOUTH-NORTH ELEVATION OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

The risk of cataract in relation to metal arc welding.

PubMed

Slagor, Rebekka Michaelsen; La Cour, Morten; Bonde, Jens Peter

2016-09-01

There are indications that solar ultraviolet radiation (UVR) increases the risk of cataract, but there is only circumstantial evidence that metal welding, an important occupational source of UVR exposure, is a risk factor. The objective of this study is to unravel if metal welding increases the risk of cataract. We compared the risk of being diagnosed with cataract from 1987-2012 in a historic cohort of 4288 male metal arc welders against a reference group comprised of Danish skilled and unskilled male workers with similar age distribution. For the welders' cohort, information on welding was collected from questionnaires and, for both cohorts, information about cataract diagnosis and operation was gathered from Danish national registers. Using Cox regression analysis, the hazard ratio (HR) for cataract diagnosis and/or operation was calculated in the follow-up period adjusted for baseline data regarding age, diabetes, and social group. There were 266 welders and 29 007 referents with a diagnosis and/or operation for cataract. The unadjusted HR for cataract comparing ever-welders with referents was 1.07 [95% confidence interval (95% CI) 0.95-1.21] and the adjusted HR was 1.08 (95% CI 0.95-1.22). Age and diabetes were as expected strong risk factors. We found no increased risk of developing cataract among Danish metal welders who worked with arc welding from 1950-1985. This may be attributed to the effectiveness of personal safety equipment.

Exploring Manganese Fractionation Using a Sequential Extraction Method to Evaluate Welders' Gas Metal Arc Welding Exposures during Heavy Equipment Manufacturing.

PubMed

Hanley, Kevin W; Andrews, Ronnee; Bertke, Steven; Ashley, Kevin

2017-01-01

The National Institute for Occupational Safety and Health (NIOSH) has conducted an occupational exposure assessment study of manganese (Mn) in welding fume at three factories where heavy equipment was manufactured. The objective of this study was to evaluate exposures to different Mn fractions using a sequential extraction procedure. One hundred nine worker-days were monitored for either total or respirable Mn during gas metal arc welding. The samples were analyzed using an experimental method to separate different Mn fractions based on selective chemical solubility. The full-shift total particle size Mn time-weighted average (TWA) breathing zone concentrations ranged 0.38-26 for soluble Mn in a mild ammonium acetate solution; 3.2-170 for Mn0,2+ in acetic acid; 3.1-290 for Mn3+,4+ in hydroxylamine-hydrochloride; and non-detectable (ND)-130 µg m-3 for insoluble Mn fractions in hydrochloric and nitric acid. The summation of all the total particulate Mn TWA fractions yielded results that ranged from 6.9 to 610 µg m-3. The range of respirable size Mn TWA concentrations were 0.33-21 for soluble Mn; 15-140 for Mn0,2+; 14-170 for Mn3+,4+; 5.3-230 for insoluble Mn; and 36-530 µg m-3 for Mn (sum of fractions). Total particulate TWA GM concentrations of the Mn (sum) were 53 (GSD = 2.5), 150 (GSD = 1.7), and 120 (GSD = 1.8) µg m-3 for the three separate factories. Although all of the workers' exposures were measured below the OSHA regulatory permissible exposure limit and NIOSH recommended exposure limit for Mn, 70 welders' exposures exceeded the ACGIH Threshold Limit Values® for total Mn (100 µg m-3) and 29 exceeded the recently adopted respirable Mn TLV (20 µg m-3). This study shows that a welding fume exposure control and management program is warranted for Mn, which includes improved exhaust ventilation and may necessitate the use of respiratory protection, especially for welding parts that impede air circulation. Published by Oxford University Press on behalf of

5. VIEW EASTOPENING IN WEST ELEVATION OF BLACKSMITH SHOP SECTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW EAST-OPENING IN WEST ELEVATION OF BLACKSMITH SHOP SECTION OF THE BETHLEHEM STEEL COMPANY SHIPYARD BLACKSMITH SHOP/BOILER SHOP. - Bethlehem Steel Company Shipyard, Blacksmith Shop-Boiler Shop, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

Concentrations of antifouling biocides in sediment and mussel samples collected from Otsuchi bay, Japan.

PubMed

Harino, Hiroya; Yamamoto, Yoshikazu; Eguchi, Sayaka; Kawai, Shini'chiro; Kurokawa, Yuko; Arai, Takaomi; Ohji, Madoka; Okamura, Hideo; Miyazaki, Nobuyuki

2007-02-01

Organotin compounds (OTs) and representative booster biocides were measured in sediment and mussels from Otsuchi Bay, Japan. The mean amounts of tributyltin (TBT) and triphenyltin (TPT) compounds in sediment were 13 microg kg(-1) dry and 3 microg kg(-1) dry, respectively. Representative booster biocides (Sea-Nine 211, Diuron, Dichlofluanid, Irgarol 1501, M1, which is a degradation compound of Irgarol 1051, and Copper pyrithione) were also detected in sediment from Otsuchi Bay. OT concentrations were higher than those of the measured booster biocides. Otsuchi Bay was divided into four parts by cluster analysis based on OT concentrations in sediment sampled from the bay. These areas included the vicinity of a shipyard, a small fishing port, the closed inner area of the bay, and the mouth of the bay. Higher concentrations of TBT and TPT and a higher ratio of TBT to total BTs were observed in the vicinity of the shipyard. A higher concentration of TPT in comparison with TBT was detected in a small fishing port. Furthermore, OT concentrations in the mouth of the bay were higher than those in the closed-off section. OT concentrations in mussels decreased with distance from the shipyard. Otsuchi Bay was then divided into three parts by cluster analysis based on the concentrations of representative booster biocides found in the bay's sediment. These areas included the vicinity of a shipyard, a small fishing port, and other sites. Concentrations of Diuron and Irgarol 1051 in the vicinity of a shipyard and a small fishing port were dramatically high in comparison with the other sites. Copper pyrithione and Dichlofluanid in addition to Diuron and Irgarol 1051 were also detected in the area of a small fishing port. The concentrations of antifouling biocides were highest in the water in front of the shipyard and showed a marked decrease with distance from the shipyard.

[The future of the European nephrology belongs to the young: the Young Nephrologists' Platform].

PubMed

Bolignano, Davide

2014-01-01

Young people are the future of research, especially in nephrology. The prevalence of young nephrologists within the main scientific European societies varies from the 12% to 34% and the 20% of the ERA-EDTA members are less than 40 years old in 2013. Recently, the ERA-EDTA has launched a new platform, the Young Nephrologists Platform (YNP), which the aim is to become the first modern network of young nephrologists from Europe and beyond. YNP aims at promoting the aggregation of young people through modern communication channels such as social networks, blogs and through the construction of a database collecting information on attitudes and personal experiences of each young nephrologist. A mentorship program, focused and young-oriented clinical courses on hot topics and the direct involvement of young nephrologists in working groups and scientific studies are some of the other interesting initiatives driven by YNP. The future of nephrology belongs to the young and YNP could represent a good springboard for the professional growth of young nephrologists.

Local exhaust ventilation for the control of welding fumes in the construction industry--a literature review.

PubMed

Flynn, Michael R; Susi, Pam

2012-08-01

Arc welding is a common unit operation in the construction industry, where frequent changes in location and welding position make it more difficult to control fume exposures than in industries where fixed locations are the norm. Welders may be exposed to a variety of toxic airborne contaminants including manganese (Mn) and hexavalent chromium (CrVI). Local exhaust ventilation (LEV) is a well-known engineering control for welding fumes but has not been adopted widely in the construction industry. This literature review presents data on the performance of a variety of LEV systems for welding fume control from the construction (five references), shipyard (five references), and other industries. The studies indicate that LEV can reduce fume exposures to total particulate, Mn, and CrVI to levels below currently relevant standards. Field studies suggest that 40-50% or more reduction in exposure is possible with portable or fixed LEV systems relative to natural ventilation but that correct positioning of the hood and adequate exhaust flow rates are essential. Successful implementation of extraction guns for gas metal arc welding (GMAW) and flux core arc welding has been demonstrated, indicating that a successful balance between extraction airflow and shielding gas requirements is possible. Work practices are an important part of achieving successful control of fume exposures; in particular, positioning the hood close to the arc, checking exhaust flow rates, and avoiding the plume. Further research is needed on hood size effects for controlling welding fume with portable LEV systems and identifying and overcoming barriers to LEV use in construction.

Upgrade of a GEP50 robot control system

NASA Astrophysics Data System (ADS)

Alounai, Ali T.; Gharsalli, Imed

2000-03-01

Recently the ASL at Tennessee Technological University was donated a GEP50 welder. The welding is done via off line point-to-point teaching. A state of the art robot was needed for research but because money was not available to purchase such an expensive item. It was therefore decided to upgrade the GEP50 control system to make the welder a multitasking robot. The robot has five degrees of freedom can be sufficient to pursue some research in robotics control. The problem was that the control system of the welder is limited to point-to-point control, using off-line teaching. To make the GEP50 a multitasking robot that can be controlled using different control strategies, the existing control system of the welder had to be replaced. The upgrade turned to be a low cost operation. This robot is currently in sue to test different advanced control strategies in the ASL. This work discusses all the steps and tasks undertaken during the upgrade operation. The hardware and software required or the upgrade are provided in this paper. The newly developed control system has been implemented and tested successfully.

29 CFR 1915.501 - General provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety plan including hazards, controls, fire safety and health rules, and emergency procedures; (ii... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard...

29 CFR 1915.501 - General provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... safety plan including hazards, controls, fire safety and health rules, and emergency procedures; (ii... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard...

Welding, longitudinal lung function decline and chronic respiratory symptoms: a systematic review of cohort studies.

PubMed

Szram, Joanna; Schofield, Susie J; Cosgrove, Martin P; Cullinan, Paul

2013-11-01

While the acute respiratory risks of welding are well characterised, more chronic effects, including those on lung function, are less clear. We carried out a systematic review of published longitudinal studies of lung function decline in welders. Original cohort studies documenting two or more sequential measurements of lung function were reviewed. Meta-analysis was carried out on studies with suitable data on forced expiratory volume in 1 s (FEV1). Seven studies were included; their quality (measured on the Newcastle-Ottawa scale) was good, although exposure assessment was limited and the studies showed significant heterogeneity. Five had data suitable for meta-analysis; the pooled estimate of the difference in FEV1 decline between welders and nonwelders was -9.0 mL · year(-1) (95% CI -22.5-4.5; p=0.193). The pooled estimates of difference in annual FEV1 decline between welders and referents who smoked was -13.7 mL · year(-1) (95% CI -33.6-6.3; p=0.179). For welders and referents who did not smoke the estimated difference was -3.8 mL · year(-1) (95% CI -20.2-12.6; p=0.650). Symptom prevalence data were mainly narrative; smoking appeared to have the greatest effect on symptom evolution. Collectively, available longitudinal data on decline of lung function in welders and respiratory symptoms suggest a greater effect in those who smoke, supporting a focus on smoking cessation as well as control of fume exposure in this trade. Further prospective studies are required to confirm these findings.

Assessment of Health Consequences of Steel Industry Welders’ Occupational Exposure to Ultraviolet Radiation

PubMed Central

Zamanian, Zahra; Mortazavi, Saied Mohammad Javad; Asmand, Ebrahim; Nikeghbal, Kiana

2015-01-01

Background: Welding is among the most important frequently used processes in the industry with a wide range of applications from the food industry to aerospace and from precision tools to shipbuilding. The aim of this study was to assess the level of steel industry welders’ exposure to ultraviolet (UV) radiation and to investigate the health impacts of these exposures. Methods: In this case–control study, we measured the intensity of UV at the workers’ wrist in Fars Steel Company through manufacture of different types of heavy metal structures, using UV-meter model 666230 made by Leybold Co., from Germany. Results: The population under the study comprised 400 people including 200 welders as the exposed group and 200 nonwelders as the unexposed group. The results of the questionnaire were analyzed using SPSS software, version 19. The average, standard deviation, maximum and minimum of the UV at the welders’ wrist were 0.362, 0.346, 1.27, and 0.01 μW/cm2, respectively. There was a significantly (P < 0.01) higher incidence of cataracts, keratoconjunctivitis, dermatitis and erythema in welders than in their nonwelders. Conclusions: This study showed that the time period of UV exposure in welders is higher than the permissible contact threshold level. Therefore, considering the outbreak of the eye and skin disorders in the welders, decreasing exposure time, reducing UV radiation level, and using personal protective equipment seem indispensable. As exposure to UV radiation can be linked to different types of skin cancer, skin aging, and cataract, welders should be advised to decrease their occupational exposures. PMID:26900437

Welding related occupational eye injuries: a narrative analysis.

PubMed

Lombardi, D A; Pannala, R; Sorock, G S; Wellman, H; Courtney, T K; Verma, S; Smith, G S

2005-06-01

To determine the activities and circumstances proximal to a welding related occupational eye injury, a hybrid narrative coding approach derived from two well developed classification systems was developed to categorize and describe the activity, initiating process, mechanism of injury, object and/or substance, and the use of protective eyewear from the narrative text data reported for each injury. Routinely collected workers' compensation claims over a one year period (2000) were analyzed from a large US insurance provider. An index term search algorithm of occupation, incident, and injury description fields identified 2209 potential welding related eye injury claims. After detailed review of these claims, 1353 welders and 822 non-welders were analyzed. During 2000, eye(s) as the primary injured body part accounted for 5% (n = 26 413) of all compensation claims. Eye injuries accounted for 25% of all claims for welders. Subjects were mainly male (97.1%) and from manufacturing (70.4%), service (11.8%), or construction (8.4%) related industries. Most injuries were foreign body (71.7%) or burn (22.2%) and 17.6% were bilateral. Common activities include welding (31.9%) and/or grinding (22.5%). Being struck by an airborne object occurred in 56.3% of cases. Non-welders showed similar patterns except that burns (43.8%) were more frequent and more often initiated by another worker (13.9%). Narrative injury text provides valuable data to supplement traditional epidemiologic analyses. Workers performing welding tasks or working nearby welders should be trained to recognize potential hazards and the effective use of proper safety equipment to prevent ocular injury.

Fiber optics welder

DOEpatents

Higgins, R.W.; Robichaud, R.E.

A system is described for welding fiber optic waveguides together. The ends of the two fibers to be joined together are accurately, collinearly aligned in a vertical orientation and subjected to a controlled, diffuse arc to effect welding and thermal conditioning. A front-surfaced mirror mounted at a 45/sup 0/ angle to the optical axis of a stereomicroscope mounted for viewing the junction of the ends provides two orthogonal views of the interface during the alignment operation.

Portable Home Welder

NASA Technical Reports Server (NTRS)

1976-01-01

Pyronetics, Inc. manufactured a small, do-it-yourself welding torch which weighs only 7 pounds, gives a 5,000 degree Farenheit flame, and costs only $40.00. This resulted from information provided by a NASA Industrial Application Center at the University of Southern California. The center provided information on chlorate candles, unique in that they generate oxygen while burning. A retrospective search uncovered information on composition, hazards, applications, manufacturers, and shipping regulations.

Thermal Stir Welder

NASA Technical Reports Server (NTRS)

Ding, R. Jeffrey (Inventor)

2012-01-01

A welding apparatus is provided for forming a weld joint between first and second elements of a workpiece. The apparatus heats the first and second elements to form an interface of material in a plasticized or melted state interface between the elements. The interface material is then allowed to cool to a plasticized state if previously in a melted state. The interface material, while in the plasticized state, is then mixed, for example, using a grinding/extruding mixer, to remove any dendritic-type weld microstructures introduced into the interface material during heating.

A panel study of occupational exposure to fine particulate matter and changes in DNA methylation over a single workday and years worked in boilermaker welders

PubMed Central

2013-01-01

Background Exposure to pollutants including metals and particulate air pollution can alter DNA methylation. Yet little is known about intra-individual changes in DNA methylation over time in relationship to environmental exposures. Therefore, we evaluated the effects of acute- and chronic metal-rich PM2.5 exposures on DNA methylation. Methods Thirty-eight male boilermaker welders participated in a panel study for a total of 54 person days. Whole blood was collected prior to any welding activities (pre-shift) and immediately after the exposure period (post-shift). The percentage of methylated cytosines (%mC) in LINE-1, Alu, and inducible nitric oxide synthase gene (iNOS) were quantified using pyrosequencing. Personal PM2.5 (particulate matter with an aerodynamic diameter ≤ 2.5 μm) was measured over the work-shift. A questionnaire assessed job history and years worked as a boilermaker. Linear mixed models with repeated measures evaluated associations between DNA methylation, PM2.5 concentration (acute exposure), and years worked as a boilermaker (chronic exposure). Results PM2.5 exposure was associated with increased methylation in the promoter region of the iNOS gene (β = 0.25, SE: 0.11, p-value = 0.04). Additionally, the number of years worked as a boilermaker was associated with increased iNOS methylation (β = 0.03, SE: 0.01, p-value = 0.03). No associations were observed for Alu or LINE-1. Conclusions Acute and chronic exposure to PM2.5 generated from welding activities was associated with a modest change in DNA methylation of the iNOS gene. Future studies are needed to confirm this association and determine if the observed small increase in iNOS methylation are associated with changes in NO production or any adverse health effect. PMID:23758843

40 CFR 52.1037 - Original identification of plan section.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the Maine Department of Environmental Protection to Portsmouth Naval Shipyard on July 25, 1997. (F..., Amendment #4, condition 4 for Portsmouth Naval Shipyard issued by Maine Department of Environmental... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maine § 52.1037 Original...

40 CFR 52.1037 - Original identification of plan section.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the Maine Department of Environmental Protection to Portsmouth Naval Shipyard on July 25, 1997. (F..., Amendment #4, condition 4 for Portsmouth Naval Shipyard issued by Maine Department of Environmental... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maine § 52.1037 Original...

40 CFR 52.1037 - Original identification of plan section.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the Maine Department of Environmental Protection to Portsmouth Naval Shipyard on July 25, 1997. (F..., Amendment #4, condition 4 for Portsmouth Naval Shipyard issued by Maine Department of Environmental... PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maine § 52.1037 Original...

5. Love, L.B. W. & A. Fletcher Co. 'North River ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Love, L.B. W. & A. Fletcher Co. 'North River Iron Works'. 1919. On file, The Applied Companies, Hoboken, New Jersey. MAP OF THE W. & A. FLETCHER SHIPYARD IN 1919. - Bethlehem Steel Company Shipyard, 1201-1321 Hudson Street, Hoboken, Hudson County, NJ

14. Photocopy of engineering drawing, Buildings 28 and 28A: Steam ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. Photocopy of engineering drawing, Buildings 28 and 28A: Steam Heating System, 1918 (original on file with the Norfolk Naval Shipyard, Portsmouth, Virginia) - Norfolk Naval Shipyard, Building No. 28A, Adjoining Buildings No. 28 & 29 on Shubrick & Breeze Streets, Portsmouth, Portsmouth, VA

46 CFR 298.21 - Limits.

Code of Federal Regulations, 2013 CFR

2013-10-01

... customarily be capitalized as Vessel or Shipyard Project construction costs such as designing, engineering...) Cost items include those items usually specified in Vessel or Shipyard Project construction contracts... fees and interest on the Obligations or other borrowings incurred during the construction period...

46 CFR 298.21 - Limits.

Code of Federal Regulations, 2012 CFR

2012-10-01

... customarily be capitalized as Vessel or Shipyard Project construction costs such as designing, engineering...) Cost items include those items usually specified in Vessel or Shipyard Project construction contracts... fees and interest on the Obligations or other borrowings incurred during the construction period...

46 CFR 298.21 - Limits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... customarily be capitalized as Vessel or Shipyard Project construction costs such as designing, engineering...) Cost items include those items usually specified in Vessel or Shipyard Project construction contracts... fees and interest on the Obligations or other borrowings incurred during the construction period...

Relation between biomarkers in exhaled breath condensate and internal exposure to metals from gas metal arc welding.

PubMed

Hoffmeyer, Frank; Raulf-Heimsoth, Monika; Weiss, Tobias; Lehnert, Martin; Gawrych, Katarzyna; Kendzia, Benjamin; Harth, Volker; Henry, Jana; Pesch, Beate; Brüning, Thomas

2012-06-01

Concerning possible harmful components of welding fumes, besides gases and quantitative aspects of the respirable welding fumes, particle-inherent metal toxicity has to be considered.The objective of this study was to investigate the effect markers leukotriene B4 (LTB4),prostaglandin E2 (PGE2) and 8-isoprostane (8-Iso PGF2α) as well as the acid–base balance(pH) in exhaled breath condensate (EBC) of 43 full-time gas metal arc welders (20 smokers) in relation to welding fume exposure. We observed different patterns of iron, chromium and nickel in respirable welding fumes and EBC. Welders with undetectable chromium in EBC(group A, n = 24) presented high iron and nickel concentrations. In this group, higher 8-isoPGF2α and LTB4 concentrations could be revealed compared to welders with detectable chromium and low levels of both iron and nickel in EBC (group B): 8-iso PGF2α443.3 pg mL−1 versus 247.2 pg mL−1; p = 0.001 and LTB4 30.5 pg mL−1 versus 17.3 pgmL−1; p = 0.016. EBC-pH was more acid in samples of group B (6.52 versus 6.82; p = 0.011).Overall, effect markers in welders were associated with iron concentrations in EBC according to smoking habits--non-smokers/smokers: LTB4 (rs = 0.48; p = 0.02/rs = 0.21; p = 0.37),PGE2 (rs = 0.15; p = 0.59/rs = 0.47; p = 0.07), 8-iso PGF2α (rs = 0.18; p = 0.54/rs = 0.59;p = 0.06). Sampling of EBC in occupational research provides a matrix for the simultaneous monitoring of metal exposure and effects on target level. Our results suggest irritative effects in the airways of healthy welders. Further studies are necessary to assess whether these individual results might be used to identify welders at elevated risk for developing a respiratory disease.

Comparative microscopic study of human and rat lungs after overexposure to welding fume.

PubMed

Antonini, James M; Roberts, Jenny R; Schwegler-Berry, Diane; Mercer, Robert R

2013-11-01

Welding is a common industrial process used to join metals and generates complex aerosols of potentially hazardous metal fumes and gases. Most long-time welders experience some type of respiratory disorder during their time of employment. The use of animal models and the ability to control the welding fume exposure in toxicology studies have been helpful in developing a better understanding of how welding fumes affect health. There are no studies that have performed a side-by-side comparison of the pulmonary responses from an animal toxicology welding fume study with the lung responses associated with chronic exposure to welding fume by a career welder. In this study, post-mortem lung tissue was donated from a long-time welder with a well-characterized work background and a history of extensive welding fume exposure. To simulate a long-term welding exposure in an animal model, Sprague-Dawley rats were treated once a week for 28 weeks by intratracheal instillation with 2mg of a stainless steel, hard-surfacing welding fume. Lung tissues from the welder and the welding fume-treated rats were examined by light and electron microscopy. Pathological analysis of lung tissue collected from the welder demonstrated inflammatory cell influx and significant pulmonary injury. The poor and deteriorating lung condition observed in the welder examined in this study was likely due to exposure to very high levels of potentially toxic metal fumes and gases for a significant number of years due to work in confined spaces. The lung toxicity profile for the rats treated with welding fume was similar. For tissue samples from both the welder and treated rats, welding particle accumulations deposited and persisted in lung structures and were easily visualized using light microscopic techniques. Agglomerates of deposited welding particles mostly were observed within lung cells, particularly alveolar macrophages. Analysis of individual particles within the agglomerates showed that these

Comparative Microscopic Study of Human and Rat Lungs After Overexposure to Welding Fume

PubMed Central

ANTONINI, JAMES M.; ROBERTS, JENNY R.; SCHWEGLER-BERRY, DIANE; MERCER, ROBERT R.

2015-01-01

Welding is a common industrial process used to join metals and generates complex aerosols of potentially hazardous metal fumes and gases. Most long-time welders experience some type of respiratory disorder during their time of employment. The use of animal models and the ability to control the welding fume exposure in toxicology studies have been helpful in developing a better understanding of how welding fumes affect health. There are no studies that have performed a side-by-side comparison of the pulmonary responses from an animal toxicology welding fume study with the lung responses associated with chronic exposure to welding fume by a career welder. In this study, post-mortem lung tissue was donated from a long-time welder with a well-characterized work background and a history of extensive welding fume exposure. To simulate a long-term welding exposure in an animal model, Sprague-Dawley rats were treated once a week for 28 weeks by intratracheal instillation with 2 mg of a stainless steel, hard-surfacing welding fume. Lung tissues from the welder and the welding fume-treated rats were examined by light and electron microscopy. Pathological analysis of lung tissue collected from the welder demonstrated inflammatory cell influx and significant pulmonary injury. The poor and deteriorating lung condition observed in the welder examined in this study was likely due to exposure to very high levels of potentially toxic metal fumes and gases for a significant number of years due to work in confined spaces. The lung toxicity profile for the rats treated with welding fume was similar. For tissue samples from both the welder and treated rats, welding particle accumulations deposited and persisted in lung structures and were easily visualized using light microscopic techniques. Agglomerates of deposited welding particles mostly were observed within lung cells, particularly alveolar macrophages. Analysis of individual particles within the agglomerates showed that these

Clamp force and alignment checking device

DOEpatents

Spicer, John Patrick; Cai, Wayne W.; Chakraborty, Debejyo; Mink, Keith

2017-04-11

A check fixture measures a total clamp force applied by a welder device. The welder device includes a welding horn having a plurality of weld pads and welding anvil having a plurality of weld pads. The check fixture includes a base member operatively supporting a plurality of force sensors. The base member and the force sensors are received between the weld pads of the welding horn and the anvil pads of the welding anvil. Each force sensor is configured to measure an individual clamp force applied thereto by corresponding weld and anvil pads when the base member is received between the welding horn and the welding anvil and the welder device is in the clamped position. The individual clamp forces are used to determine whether the weld and/or anvil pads are worn or misaligned.

Apparatus for the concurrent ultrasonic inspection of partially completed welds

DOEpatents

Johnson, John A.

2000-01-01

An apparatus for the concurrent nondestructive evaluation of partially completed welds is described and which is used in combination with an automated welder and which includes an ultrasonic signal generator mounted on the welder and which generates an ultrasonic signal which is directed toward one side of the partially completed welds; an ultrasonic signal receiver mounted on the automated welder for detecting ultrasonic signals which are transmitted by the ultrasonic signal generator and which are reflected or diffracted from one side of the partially completed weld or which passes through a given region of the partially completed weld; and an analysis assembly coupled with the ultrasonic signal receiver and which processes the ultrasonic signals received by the ultrasonic signal receiver to identify welding flaws in the partially completed weld.

Assessment of US shipbuilding current capability to build a commercial OTEC platform and a cold water pipe

DOE Office of Scientific and Technical Information (OSTI.GOV)

Komelasky, M. C.

1980-03-01

Lowry and Hoffman Associates Inc. (LHA) performed for ORI an analysis of the shipbuilding requirements for constructing an OTEC plant, and the available shipyard assets which could fulfill these requirements. In addition, several shipyards were queried concerning their attitudes towards OTEC. In assessing the shipbuilding requirements for an OTEC plant, four different platform configurations were studied and four different designs of the cold water pipe (CWP) were examined. The platforms were: a concrete ship design proposed by Lockheed; concrete spar designs with internal heat exchangers (IHE) (Rosenblatt) and external heat exchangers (XHE) (Lockheed); and a steel ship design proposed bymore » Gibbs and Cox. The types of materials examined for CWP construction were: steel, fiber reinforced plastic (FPR), elastomer, and concrete. The report is organized io three major discussion areas. All the construction requirements are synthesized for the four platforms and CWPs, and general comments are made concerning their availability in the US. Specific shipbuilders facilities are reviewed for their applicability to building an OTEC plant, an assessment of the shipyards general interest in the OTEC program is presented providing an insight into their nearterm commercial outlook. The method of determining this interest will depend largely on a risk analysis of the OTEC system. Also included are factors which may comprise this analysis, and a methodology to ascertain the risk. In the appendices, various shipyard specifications are presented, shipyard assessment matrices are given, graphs of various shipyard economic outlooks are provided, and definitions of the risk factors are listed. (WHK)« less

Monitoring of chromium and nickel in biological fluids of grinders grinding stainless steel.

PubMed

Stridsklev, Inger Cecilie; Schaller, Karl-Heinz; Langård, Sverre

2007-04-01

Stainless steel (SS) welders usually spend some of their working time grinding, to finish and smoothen the welding groove. The aim of this study was to investigate possible relations between the concentrations of nickel (Ni) and chromium (Cr) in the work atmosphere generated by grinders grinding SS, and to compare the air levels to the levels of Cr and Ni in their biological fluids. Hereby, it might be possible to identify the contribution of grinding to the levels of Cr and Ni in biological fluids in SS welders. Also the airborne levels of Cr and Ni in SS grinders were compared to corresponding levels in SS welders. The subjects examined in this study were selected among SS grinders not performing welding. Nine grinders were monitored for 1 workweek, measuring Cr and Ni in air, blood and urine. They were questioned about their exposure to Cr and Ni during their working careers. Air levels of total Cr up to 95 microg/m(3) and Ni levels up to 25 microg/m(3) were measured. Chromium(VI) (Cr(VI)) was detectable only in five air samples; the levels in the remaining samples were below the detection limit. The levels of Cr in blood and urine were also low. The levels of Ni in urine were close to those for MMA and MIG/MAG SS welders. In spite of high levels of total Cr and Ni observed in air, the levels found in biological fluids were low. The Cr levels in more than 50% of the whole blood and red cell samples and about 1/3 of the Cr-plasma levels were below the detection limits. The mean blood levels for Cr were 0.43, 0.60 and 0.35 microg/l, in whole blood, plasma and red cells, respectively. The mean levels for Cr in the urine was 1.6, 1.4 and 1.4 microg/g creatinine for the first void, just before and just after work. For Ni the mean blood levels were 0.87 microg/l in whole blood and 0.68 microg/l in plasma. The mean levels and ranges of Ni from the first void, just before and after work in urine were 3.79 microg/g creatinine, 3.39 and 4.56, respectively. The Cr

29 CFR 1915.502 - Fire safety plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Fire safety plan. 1915.502 Section 1915.502 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard...

29 CFR 1915.502 - Fire safety plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Fire safety plan. 1915.502 Section 1915.502 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

29 CFR 1915.505 - Fire response.

Code of Federal Regulations, 2011 CFR

2011-07-01

... written standard operating procedures for each type of fire response at the employer's facility; (v) The... suppression operations established by written standard operating procedures for each particular type of fire...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard Employment § 1915...

29 CFR 1915.505 - Fire response.

Code of Federal Regulations, 2013 CFR

2013-07-01

... written standard operating procedures for each type of fire response at the employer's facility; (v) The... suppression operations established by written standard operating procedures for each particular type of fire...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard Employment § 1915...

29 CFR 1915.505 - Fire response.

Code of Federal Regulations, 2012 CFR

2012-07-01

... written standard operating procedures for each type of fire response at the employer's facility; (v) The... suppression operations established by written standard operating procedures for each particular type of fire...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard Employment § 1915...

29 CFR 1915.505 - Fire response.

Code of Federal Regulations, 2010 CFR

2010-07-01

... written standard operating procedures for each type of fire response at the employer's facility; (v) The... suppression operations established by written standard operating procedures for each particular type of fire...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard Employment § 1915...

29 CFR 1915.505 - Fire response.

Code of Federal Regulations, 2014 CFR

2014-07-01

... written standard operating procedures for each type of fire response at the employer's facility; (v) The... suppression operations established by written standard operating procedures for each particular type of fire...) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT Fire Protection in Shipyard Employment § 1915...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

46 CFR 298.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... App. U.S.C. 1101 through 1294). Actual Cost of a Vessel or Shipyard Project means, as of any specified... thereafter, for the construction, reconstruction or reconditioning of such Vessel or Shipyard Project. Advanced Shipbuilding Technology means: (1) Numerically controlled machine tools, robots, automated process...

Nutrition for Young Men

MedlinePlus

... Health Wellness Healthy Aging Nutrition for Young Men Nutrition for Young Men Reviewed by Taylor Wolfram, MS, ... 2017 XiXinXing/iStock/Thinkstock For many young men, nutrition isn't always a focus. There are many ...

Photocopy of photograph (from NBPPNSY) Replogle, Photographers, April 21, 1920 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy of photograph (from NBP-PNSY) Replogle, Photographers, April 21, 1920 View of boat shop showing the variety of small boats made by the shipyard; whaleboats, sailboats, lifeboats, crew barges, naptha launches and dorys. - Naval Base Philadelphia-Philadelphia Naval Shipyard, League Island, Philadelphia, Philadelphia County, PA

Gravimetric and analytical evaluation of welding fume in an automobile part manufacturing factory.

PubMed

Mansouri, N; Atbi, F; Moharamnezhad, N; Rahbaran, D A; Alahiari, M

2008-12-28

Welding is one of the most exercised industrial processes which welders are exposed to chemical and physical Hazardous agents. This study was conducted to evaluate occupational and environmental exposures to aerosols generated by welding processes in a factory. A total of 28 samples of aerosols were collected at 4 different locations including indoor, outdoor, source of welding and the stacks using a high volume pump with a volumetric flow rate of 112 lit/min calibrated with a dry gas meter. The samples were collected on round 110 mm fiber glass filters, measured gravimetrically, extracted using nitric acid and analyzed with atomic absorption spectroscopy method for heavy metals including Fe, Mn, Ni, Cr3+, Cr+6, Co, and Zn. Gravimetric measuring has shown the mean values of indoor air: 1.33 mg/m3, breathing zone of the welders using coated electrodes and CO2: 7.25 mg/m3 and 6.45 mg/m3 respectively and in ventilation exhausts: 95.07 mg/m3. The mean values of Fe, Mn, and Ni were 0.8, 0.041, and 0.00 mg/m3 in indoor air, 2.7, 0.18, and 0.15 mg/m3 in breathing zone of welders used coated electrodes, and 1.75, 0.08, and 0.22 mg/m3 in breathing zone of welders used CO2 welding respectively. The concentrations of Cr3+, Cr+6, Co, and Zn were too low to be detected. The welders were exposed to high concentration of metallic fumes, which raise the risk of pulmonary dysfunction and other health disorders. Using suitable respiratory masks and Appling the effective local ventilation system may improve the working condition.

Welding related occupational eye injuries: a narrative analysis

PubMed Central

Lombardi, D; Pannala, R; Sorock, G; Wellman, H; Courtney, T; Verma, S; Smith, G

2005-01-01

Objective: To determine the activities and circumstances proximal to a welding related occupational eye injury, a hybrid narrative coding approach derived from two well developed classification systems was developed to categorize and describe the activity, initiating process, mechanism of injury, object and/or substance, and the use of protective eyewear from the narrative text data reported for each injury. Methods: Routinely collected workers' compensation claims over a one year period (2000) were analyzed from a large US insurance provider. An index term search algorithm of occupation, incident, and injury description fields identified 2209 potential welding related eye injury claims. After detailed review of these claims, 1353 welders and 822 non-welders were analyzed. Results: During 2000, eye(s) as the primary injured body part accounted for 5% (n = 26 413) of all compensation claims. Eye injuries accounted for 25% of all claims for welders. Subjects were mainly male (97.1%) and from manufacturing (70.4%), service (11.8%), or construction (8.4%) related industries. Most injuries were foreign body (71.7%) or burn (22.2%) and 17.6% were bilateral. Common activities include welding (31.9%) and/or grinding (22.5%). Being struck by an airborne object occurred in 56.3% of cases. Non-welders showed similar patterns except that burns (43.8%) were more frequent and more often initiated by another worker (13.9%). Conclusions: Narrative injury text provides valuable data to supplement traditional epidemiologic analyses. Workers performing welding tasks or working nearby welders should be trained to recognize potential hazards and the effective use of proper safety equipment to prevent ocular injury. PMID:15933411

Advanced Welding Tool

NASA Technical Reports Server (NTRS)

1982-01-01

Accutron Tool & Instrument Co.'s welder was originally developed as a tool specifically for joining parts made of plastic or composite materials in any atmosphere to include the airless environment of space. Developers decided on induction or magnetic heating to avoid causing deformation and it also can be used with almost any type of thermoplastic material. Induction coil transfers magnetic flux through the plastic to a metal screen that is sandwiched between the sheets of plastic to be joined. When welder is energized, alternating current produces inductive heating on the screen causing the adjacent plastic surfaces to melt and flow into the mesh, creating a bond on the total surface area. Dave Brown, owner of Great Falls Canoe and Kayak Repair, Vienna, VA, uses a special repair technique based on operation of the Induction Toroid Welder to fix canoes. Whitewater canoeing poses the problem of frequent gashes that are difficult to repair. The main reason is that many canoes are made of plastics. The commercial Induction model is a self-contained, portable welding gun with a switch on the handle to regulate the temperature of the plastic melting screen. Welder has a broad range of applications in the automobile, appliance, aerospace and construction industries.

Effects of Exposure to Welding Fume on Lung Function: Results from the German WELDOX Study.

PubMed

Lehnert, M; Hoffmeyer, F; Gawrych, K; Lotz, A; Heinze, E; Berresheim, H; Merget, R; Harth, V; Van Gelder, R; Hahn, J-U; Hartwig, A; Weiß, T; Pesch, B; Brüning, T

2015-01-01

The association between exposure to welding fume and chronic obstructive pulmonary disease (COPD) has been insufficiently clarified. In this study we assessed the influence of exposure to welding fume on lung function parameters. We investigated forced expiratory volume in 1 s (FEV1), forced vital capacity (FVC), FEV1/FVC, and expiratory flow rates in 219 welders. We measured current exposure to respirable particles and estimated a worker's lifetime exposure considering welding techniques, working conditions and protective measures at current and former workplaces. Multiple regression models were applied to estimate the influence of exposure to welding fume, age, and smoking on lung function. We additionally investigated the duration of working as a welder and the predominant welding technique. The findings were that age- and smoking-adjusted lung function parameters showed no decline with increasing duration, current exposure level, and lifetime exposure to welding fume. However, 15% of the welders had FEV1/FVC below the lower limit of normal, but we could not substantiate the presence of an association with the measures of exposure. Adverse effects of cigarette smoking were confirmed. In conclusion, the study did not support the notion of a possible detrimental effect of exposure to welding fume on lung function in welders.

Association between the Type of Workplace and Lung Function in Copper Miners

PubMed Central

Gruszczyński, Leszek; Wojakowska, Anna; Ścieszka, Marek; Turczyn, Barbara; Schmidt, Edward

2016-01-01

The aim of the analysis was to retrospectively assess changes in lung function in copper miners depending on the type of workplace. In the groups of 225 operators, 188 welders, and 475 representatives of other jobs, spirometry was performed at the start of employment and subsequently after 10, 20, and 25 years of work. Spirometry Longitudinal Data Analysis software was used to estimate changes in group means for FEV1 and FVC. Multiple linear regression analysis was used to assess an association between workplace and lung function. Lung function assessed on the basis of calculation of longitudinal FEV1 (FVC) decline was similar in all studied groups. However, multiple linear regression model used in cross-sectional analysis revealed an association between workplace and lung function. In the group of welders, FEF75 was lower in comparison to operators and other miners as early as after 10 years of work. Simultaneously, in smoking welders, the FEV1/FVC ratio was lower than in nonsmokers (p < 0,05). The interactions between type of workplace and smoking (p < 0,05) in their effect on FVC, FEV1, PEF, and FEF50 were shown. Among underground working copper miners, the group of smoking welders is especially threatened by impairment of lung ventilatory function. PMID:27274987

77 FR 43860 - Notice of Lodging of Consent Decree Pursuant to the Clean Water Act

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... water, and applicable oil pollution prevention regulations, at Fairhaven Shipyard's two facilities at 50... DEPARTMENT OF JUSTICE Notice of Lodging of Consent Decree Pursuant to the Clean Water Act In... Companies, Inc. (``Fairhaven Shipyard'') violated Sections 301, 311, and 402 of the Clean Water Act, 33 U.S...

40 CFR 52.1020 - Identification of plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Naval Shipyard, York County, Kittery, Maine Air Emission License Amendment #4 A-452-71-F-M 07/25/1997 04...-M, Amendment #4, condition 4 for Portsmouth Naval Shipyard. Maine Energy Recovery Company, York...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maine § 52.1020 Identification of plan. (a...

40 CFR 52.1020 - Identification of plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Naval Shipyard, York County, Kittery, Maine Air Emission License Amendment #4 A-452-71-F-M 07/25/1997 04...-M, Amendment #4, condition 4 for Portsmouth Naval Shipyard. Maine Energy Recovery Company, York...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maine § 52.1020 Identification of plan. (a...

40 CFR 52.1020 - Identification of plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Naval Shipyard, York County, Kittery, Maine Air Emission License Amendment #4 A-452-71-F-M 07/25/1997 04...-M, Amendment #4, condition 4 for Portsmouth Naval Shipyard. Maine Energy Recovery Company, York...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Maine § 52.1020 Identification of plan. (a...

2. AERIAL VIEW EXUSS HORNET CVS12 LOOKING PORT TO STARBOARD, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. AERIAL VIEW EX-USS HORNET CVS-12 LOOKING PORT TO STARBOARD, THREE MINECRAFT MORRED ALONGSIDE ON PORT AFT QUARTER. OTHER INACTIVE SHIPS IN BACKGROUND, PUGET SOUND NAVEL SHIPYARD TO LEFT SIDE OF PHOTO. - U.S.S. HORNET, Puget Sound Naval Shipyard, Sinclair Inlet, Bremerton, Kitsap County, WA

Immunotoxicology of arc welding fume: Worker and experimental animal studies

PubMed Central

Zeidler-Erdely, Patti C.; Erdely, Aaron; Antonini, James M.

2015-01-01

Arc welding processes generate complex aerosols composed of potentially hazardous metal fumes and gases. Millions of workers worldwide are exposed to welding aerosols daily. A health effect of welding that is of concern to the occupational health community is the development of immune system dysfunction. Increased severity, frequency, and duration of upper and lower respiratory tract infections have been reported among welders. Specifically, multiple studies have observed an excess mortality from pneumonia in welders and workers exposed to metal fumes. Although several welder cohort and experimental animal studies investigating the adverse effects of welding fume exposure on immune function have been performed, the potential mechanisms responsible for these effects are limited. The objective of this report was to review both human and animal studies that have examined the effect of welding fume pulmonary exposure on local and systemic immune responses. PMID:22734811

1. Copy photo of context view taken in 1917 looking ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Copy photo of context view taken in 1917 looking east along Farragut Avenue, then called Main Street, showing construction of double tracking. On right is Building 78 with original smoke stack. Building 59 is visible as third building from left. This photograph was taken from a hill that was later cut away in order to expand the shipyard. See photo for original caption. HABS negative is a 4x5' copy negative made from a print in the collection of the Photographic Branch, Puget Sound Naval Shipyard, Bremerton, WA. Photographer unknown. - Puget Sound Naval Shipyard, Administration Building, Farragut Avenue, Bremerton, Kitsap County, WA

46 CFR Appendix II to Part 390 - Sample Capital Construction Fund Agreement

Code of Federal Regulations, 2010 CFR

2010-10-01

...) In the case of a vessel constructed or acquired within one year of final delivery from the shipyard... date of such vessel's final delivery; (2) In the case of a vessel reconstructed or acquired more than one year after final delivery from the shipyard after construction with the aid of qualified...

46 CFR Appendix II to Part 390 - Sample Capital Construction Fund Agreement

Code of Federal Regulations, 2011 CFR

2011-10-01

...) In the case of a vessel constructed or acquired within one year of final delivery from the shipyard... date of such vessel's final delivery; (2) In the case of a vessel reconstructed or acquired more than one year after final delivery from the shipyard after construction with the aid of qualified...

Suicide in young men.

PubMed

Pitman, Alexandra; Krysinska, Karolina; Osborn, David; King, Michael

2012-06-23

Suicide is second to only accidental death as the leading cause of mortality in young men across the world. Although suicide rates for young men have fallen in some high-income and middle-income countries since the 1990s, wider mortality measures indicate that rates remain high in specific regions, ethnic groups, and socioeconomic groups within those nations where rates have fallen, and that young men account for a substantial proportion of the economic cost of suicide. High-lethality methods of suicide are preferred by young men: hanging and firearms in high-income countries, pesticide poisoning in the Indian subcontinent, and charcoal-burning in east Asia. Risk factors for young men include psychiatric illness, substance misuse, lower socioeconomic status, rural residence, and single marital status. Population-level factors include unemployment, social deprivation, and media reporting of suicide. Few interventions to reduce suicides in young men have been assessed. Efforts to change help-seeking behaviour and to restrict access to frequently used methods hold the most promise. Copyright © 2012 Elsevier Ltd. All rights reserved.

78 FR 31999 - 30-Day Notice of Proposed Information Collection: Young Turkey/Young America Evaluation (YTYA...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-28

... DEPARTMENT OF STATE [Public Notice 8336] 30-Day Notice of Proposed Information Collection: Young Turkey/ Young America Evaluation (YTYA) Survey ACTION: Notice of request for public comment and... . SUPPLEMENTARY INFORMATION: Title of Information Collection: Young Turkey/Young America Evaluation (YTYA) Survey...

78 FR 9448 - 60-Day Notice of Proposed Information Collection: Young Turkey/Young America Evaluation (YTYA...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-08

... DEPARTMENT OF STATE [Public Notice 8181] 60-Day Notice of Proposed Information Collection: Young Turkey/ Young America Evaluation (YTYA) Survey ACTION: Notice of request for public comment. SUMMARY: The...: Title of Information Collection: Young Turkey/Young America Evaluation (YTYA) Survey. OMB Control Number...

Pneumococcal infection of respiratory cells exposed to welding fumes; Role of oxidative stress and HIF-1 alpha.

PubMed

Grigg, Jonathan; Miyashita, Lisa; Suri, Reetika

2017-01-01

Welders are more susceptible to pneumococcal pneumonia. The mechanisms are yet unclear. Pneumococci co-opt the platelet activating factor receptor (PAFR) to infect respiratory epithelial cells. We previously reported that exposure of respiratory cells to welding fumes (WF), upregulates PAFR-dependent pneumococcal infection. The signaling pathway for this response is unknown, however, in intestinal cells, hypoxia-inducible factor-1 α (HIF 1α) is reported to mediate PAFR-dependent infection. We sought to assess whether oxidative stress plays a role in susceptibility to pneumococcal infection via the platelet activating factor receptor. We also sought to evaluate the suitability of nasal epithelial PAFR expression in welders as a biomarker of susceptibility to infection. Finally, we investigated the generalisability of the effect of welding fumes on pneumococcal infection and growth using a variety of different welding fume samples. Nasal epithelial PAFR expression in welders and controls was analysed by flow cytometry. WF were collected using standard methodology. The effect of WF on respiratory cell reactive oxygen species production, HIF-1α expression, and pneumococcal infection was determined using flow cytometry, HIF-1α knockdown and overexpression, and pneumococcal infection assays. We found that nasal PAFR expression is significantly increased in welders compared with controls and that WF significantly increased reactive oxygen species production, HIF-1α and PAFR expression, and pneumococcal infection of respiratory cells. In unstimulated cells, HIF-1α knockdown decreased PAFR expression and HIF-1α overexpression increased PAFR expression. However, in knockdown cells pneumococcal infection was paradoxically increased and in overexpressing cells infection was unaffected. Nasal epithelial PAFR expression may be used as a biomarker of susceptibility to pneumococcal infection in order to target individuals, particularly those at high risk such as welders

Oxidative stress, telomere shortening, and DNA methylation in relation to low-to-moderate occupational exposure to welding fumes.

PubMed

Li, Huiqi; Hedmer, Maria; Wojdacz, Tomasz; Hossain, Mohammad Bakhtiar; Lindh, Christian H; Tinnerberg, Håkan; Albin, Maria; Broberg, Karin

2015-10-01

Evidence suggests that exposure to welding fumes is a risk factor for lung cancer. We examined relationships between low-to-moderate occupational exposure to particles from welding fumes and cancer-related biomarkers for oxidative stress, changes in telomere length, and alterations in DNA methylation. We enrolled 101 welders and 127 controls (all currently nonsmoking men) from southern Sweden. We performed personal sampling of respirable dust and measured 8-oxodG concentrations in urine using a simplified liquid chromatography tandem mass spectrometry method. Telomere length in peripheral blood was measured by quantitative polymerase chain reaction. Methylation status of 10 tumor suppressor genes was determined by methylation-sensitive high-resolution melting analysis. All analyses were adjusted for age, body mass index, previous smoking, passive smoking, current residence, and wood burning stove/boiler at home. Welders were exposed to respirable dust at 1.2 mg/m(3) (standard deviation, 3.3 mg/m(3); range, 0.1-19.3), whereas control exposures did not exceed 0.1 mg/m(3) (P < 0.001). Welders and controls did not differ in 8-oxodG levels (β = 1.2, P = 0.17) or relative telomere length (β = -0.053, P = 0.083) in adjusted models. Welders showed higher probability of adenomatous polyposis coli (APC) methylation in the unadjusted model (odds ratio = 14, P = 0.014), but this was not significant in the fully adjusted model (P = 0.052). Every working year as a welder was associated with 0.0066 units shorter telomeres (95% confidence interval -0.013 to -0.00053, P = 0.033). Although there were no clear associations between concentrations of respirable dust and the biomarkers, there were modest signs of associations between oxidative stress, telomere alterations, DNA methylation, and occupational exposure to low-to-moderate levels of particles. © 2015 Wiley Periodicals, Inc.

Young Migrants and Discourses on Young Migrants in the Netherlands

ERIC Educational Resources Information Center

Gerritsen, Debby; Maier, Robert

2012-01-01

This article compares the perspectives of young migrants in the Netherlands with the dominant discourse on "migrants" at present. The integration of young "migrants" have been studied in the European research projects TRESEGY and PROFACITY with the help of a number of ethnographic studies and a questionnaire in the Netherlands.…

An Economic Analysis of Investment in the United States Shipbuilding Industry

DTIC Science & Technology

2010-06-01

using U.S. Bureau of Economic Analysis (BEA) input/output data and the “Leontief inversion process” modeled at Carnegie Mellon University. This... modeled at Carnegie Mellon University. This sector was compared with five alternative investments. Second, the benefits of the shipyard-related...EIO-LCA Model ..................................39 2. Shipyard Direct Labor Trends .........................................................43 viii 3

[Vulvovaginitis in young girls].

PubMed

Olejek, Anita; Kellas-Sleczka, Sylwia; Kozak-Darmas, Iwona; Bilska, Anna; Zamłyński, Jacek; Horak, Stanisław; Nowak, Leszek

2009-12-01

Vulvovaginitis is the most common cause of gynecological complaints in young girls. Factors which cause vulvovaginitis include, among other things, low level of sexual hormones (hypoestrogenism), the anatomical proximity of the rectum and delicate vulvar skin and vaginal mucosa. Usually vulvovaginitis in young girls is caused by non-specific factors. The aim of the study was to present the most frequent causes of vulvovaginitis in young girls.

Development of Welding Fumes Health Index (WFHI) for Welding Workplace's Safety and Health Assessment.

PubMed

Hariri, Azian; Paiman, Nuur Azreen; Leman, Abdul Mutalib; Md Yusof, Mohammad Zainal

2014-08-01

This study aimed to develop an index that can rank welding workplace that associate well with possible health risk of welders. Welding Fumes Health Index (WFHI) were developed based on data from case studies conducted in Plant 1 and Plant 2. Personal sampling of welding fumes to assess the concentration of metal constituents along with series of lung function tests was conducted. Fifteen metal constituents were investigated in each case study. Index values were derived from aggregation analysis of metal constituent concentration while significant lung functions were recognized through statistical analysis in each plant. The results showed none of the metal constituent concentration was exceeding the permissible exposure limit (PEL) for all plants. However, statistical analysis showed significant mean differences of lung functions between welders and non-welders. The index was then applied to one of the welding industry (Plant 3) for verification purpose. The developed index showed its promising ability to rank welding workplace, according to the multiple constituent concentrations of welding fumes that associates well with lung functions of the investigated welders. There was possibility that some of the metal constituents were below the detection limit leading to '0' value of sub index, thus the multiplicative form of aggregation model was not suitable for analysis. On the other hand, maximum or minimum operator forms suffer from compensation issues and were not considered in this study.

Fate of manganese associated with the inhalation of welding fumes: potential neurological effects.

PubMed

Antonini, James M; Santamaria, Annette B; Jenkins, Neil T; Albini, Elisa; Lucchini, Roberto

2006-05-01

Welding fumes are a complex mixture composed of different metals. Most welding fumes contain a small percentage of manganese. There is an emerging concern among occupational health officials about the potential neurological effects associated with the exposure to manganese in welding fumes. Little is known about the fate of manganese that is complexed with other metals in the welding particles after inhalation. Depending on the welding process and the composition of the welding electrode, manganese may be present in different oxidation states and have different solubility properties. These differences may affect the biological responses to manganese after the inhalation of welding fumes. Manganese intoxication and the associated neurological symptoms have been reported in individual cases of welders who have been exposed to high concentrations of manganese-containing welding fumes due to work in poorly ventilated areas. However, the question remains as to whether welders who are exposed to low levels of welding fumes over long periods of time are at risk for the development of neurological diseases. For the most part, questions remain unanswered. There is still paucity of adequate scientific reports on welders who suffered significant neurotoxicity, hence there is a need for well-designed epidemiology studies that combine complete information on the occupational exposure of welders with both behavioral and biochemical endpoints of neurotoxicity.

2011-2012 ESTCP Live Site Demonstrations, ESTCP MR-201165, Cost and Performance Report TEMTADS Demonstration

DTIC Science & Technology

2014-05-30

6392 The TEMTADS 5×5 Array was demonstrated at two sites, the former Mare Island Naval Shipyard, CA, in 2011, and the former Spencer Artillery Range, TN...Contamination ......................................................................................... 11 4.3 Former Spencer Artillery Range...Magnetic Induction ESTCP Environmental Security Technology Certification Program fMINSY former Mare Island Naval Shipyard, CA fSpAR former Spencer

11. Photocopy of photograph in the collection of Photographic Branch, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. Photocopy of photograph in the collection of Photographic Branch, Puget Sound Naval Shipyard, Bremerton, WA. Original is labelled: Yard Photo 42. Date unknown, probably 1940's. Photographer unknown. HABS negative is a 4x5' copy negative. Perspective view of NE corner of Building 78. - Puget Sound Naval Shipyard, Administration Building, Farragut Avenue, Bremerton, Kitsap County, WA

Automated closure system for nuclear reactor fuel assemblies

DOEpatents

Christiansen, David W.; Brown, William F.

1985-01-01

A welder for automated closure of fuel pins by a pulsed magnetic process in which the open end of a length of cladding is positioned within a complementary tube surrounded by a pulsed magnetic welder. Seals are provided at each end of the tube, which can be evacuated or can receive tag gas for direct introduction to the cladding interior. Loading of magnetic rings and end caps is accomplished automatically in conjunction with the welding steps carried out within the tube.

Young Stars with SALT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riedel, Adric R.; Alam, Munazza K.; Rice, Emily L.

We present a spectroscopic and kinematic analysis of 79 nearby M dwarfs in 77 systems. All of these dwarfs are low-proper-motion southern hemisphere objects and were identified in a nearby star survey with a demonstrated sensitivity to young stars. Using low-resolution optical spectroscopy from the Red Side Spectrograph on the South African Large Telescope, we have determined radial velocities, H-alpha, lithium 6708 Å, and potassium 7699 Å equivalent widths linked to age and activity, and spectral types for all of our targets. Combined with astrometric information from literature sources, we identify 44 young stars. Eighteen are previously known members ofmore » moving groups within 100 pc of the Sun. Twelve are new members, including one member of the TW Hydra moving group, one member of the 32 Orionis moving group, 9 members of Tucana-Horologium, one member of Argus, and two new members of AB Doradus. We also find 14 young star systems that are not members of any known groups. The remaining 33 star systems do not appear to be young. This appears to be evidence of a new population of nearby young stars not related to the known nearby young moving groups.« less

New Plays from A.C.T.'s Young Conservatory. Volume II. Young Actors Series.

ERIC Educational Resources Information Center

Slaight, Craig, Ed.

This collection of new plays for young actors comes from the repertoire of the Young Conservatory, a professional theater training program for young people ages 8 to 18 at the American Conservatory Theater. Each of the five plays in the collection was developed in this way: an outstanding professional playwright is invited to create a new play…

46 CFR 296.60 - Applications.

Code of Federal Regulations, 2013 CFR

2013-10-01

... under 46 U.S.C. 3517, to perform qualified M&R of one or more MSP vessels in United States shipyards... qualified M&R of one or more MSP vessels in United States shipyards, subject to the terms of this section... inspection referred to in paragraph (e)(1)(i) of this section, to be necessary; and (iii) Any additional M&R...

46 CFR 296.60 - Applications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... under 46 U.S.C. 3517, to perform qualified M&R of one or more MSP vessels in United States shipyards... qualified M&R of one or more MSP vessels in United States shipyards, subject to the terms of this section... inspection referred to in paragraph (e)(1)(i) of this section, to be necessary; and (iii) Any additional M&R...

46 CFR 296.60 - Applications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... under 46 U.S.C. 3517, to perform qualified M&R of one or more MSP vessels in United States shipyards... qualified M&R of one or more MSP vessels in United States shipyards, subject to the terms of this section... inspection referred to in paragraph (e)(1)(i) of this section, to be necessary; and (iii) Any additional M&R...

46 CFR 296.60 - Applications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... under 46 U.S.C. 3517, to perform qualified M&R of one or more MSP vessels in United States shipyards... qualified M&R of one or more MSP vessels in United States shipyards, subject to the terms of this section... inspection referred to in paragraph (e)(1)(i) of this section, to be necessary; and (iii) Any additional M&R...

5. INDUSTRIAL PIPING SYSTEM FOR 500 H.P. LLEWELLYN BOILER, ADDITION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. INDUSTRIAL PIPING SYSTEM FOR 500 H.P. LLEWELLYN BOILER, ADDITION TO POWER HOUSE. United Engineering Company Ltd., Alameda Shipyard. John Hudspeth, architect, foot of Main Street, Alameda, California. Sheet M1. Plan no. 10,551. Scale 1/4 inch to the foot. June 1, 1945. pencil on vellum - United Engineering Company Shipyard, Boiler House, 2900 Main Street, Alameda, Alameda County, CA

14. Photocopy of1931 drawing titled: BUILDING 78, FIRE PROOF VAULTS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. Photocopy of1931 drawing titled: BUILDING 78, FIRE PROOF VAULTS FOR GENERAL FILES; PLAN, ELEVATION, SECTIONS. HABS photograph is an 8x10' contact print made from a high contrast copy negative of the original drawing in the collection of Department of Public Works, Puget Sound Naval Shipyard, Bremerton, WA. - Puget Sound Naval Shipyard, Administration Building, Farragut Avenue, Bremerton, Kitsap County, WA

The National Shipbuilding Research Program. Evaluation of Shipbuilding CAD/CAM Systems (Phase I)

DTIC Science & Technology

1996-10-14

Industries Norddeutsche Itiormations Systems GmbH Odense Steel Shipyard Sener Ingenieria y Sistemas SMK Ingenieurburo Verolrne Scheepswerf Heusden b.v...Systems Logimatic Marine Consultants A/S Mitsubishi Heavy Industries Norddeutsche Informations Systems GmbH Odense Steel Shipyard Sener Ingenieria y...market share and business backlog . continue profitable operation in spite of relentless price and schedule competition 11.0 SENERMAR Sener Ingenieria

Nuclear-powered ships

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-07-01

This paper reports that using Puget Sound Naval Shipyard as a model, GAO examined the Navy's accounting practices at nuclear shipyards. In fiscal year 1991, Puget Sound worked on 24 nuclear-powered and three conventionally powered ships. About 31 percent of the workdays and 35 percent of total costs were for nuclear work. The average cost per workday for nuclear labor was 25 percent higher than for non-nuclear work, and the average cost per day for overhead for nuclear work was about 60 percent higher. These higher costs are due to the complexity of nuclear work, which requires a higher levelmore » of services, and the higher cost of specially trained workers and specialized shipyard departments that support nuclear work.« less

Shipyard Marking Methods

DTIC Science & Technology

1980-09-01

K ( 7 ) D , SOAPSTONE ( 1 3 ) E. lNK (5) F. CRAYON OR PAINT STICK (14) G.DYE (1) H . PE N C I L ( 1 ) 1. ELECTRIC ENGRAVING (1) 2. WHO MANUFACTURES...CHALK ( 2 ) D . DYE (1) H, SOAPSTONE (4) 4. W HAT TYPE OF DISPENSING METHOD IS UTILIZED WITH MARKING MATERIALS? A . BALL POINT TUBE ( 1 3 ) H , STEEL...9 ) L, BAMBOO PEN & INK POT F. SOAPSTONE (12) M . OIL PENCIL ( 1 ) G . L A C S T I C K ( 0 ) N . ELECTRI c ENGRAVER (1) 5, ARE STANDARD COLORS

Age and sex differences in the taste sensitivity of young adult, young-old and old-old Japanese.

PubMed

Yoshinaka, Masaki; Ikebe, Kazunori; Uota, Masahiro; Ogawa, Taiji; Okada, Tadashi; Inomata, Chisato; Takeshita, Hajime; Mihara, Yusuke; Gondo, Yasuyuki; Masui, Yukie; Kamide, Kei; Arai, Yasumichi; Takahashi, Ryutaro; Maeda, Yoshinobu

2016-12-01

The present study examined sex and age differences in taste sensitivity among young adult, young-old and old-old Japanese. Participants were divided into three groups comprising 477 men and 519 women in the young-old group (aged 69-71 years), 449 men and 500 women in the old-old group (aged 79-81 years), and 35 men and 35 women in the young adult group (aged 24-32 years). Recognition thresholds for the four basic tastes were measured using the 1-mL whole mouth gustatory test, in which taste solutions of the four basic tastes were tested in five concentrations. Young adults showed significantly lower recognition thresholds than the young-old group, and the young-old group showed significantly lower recognition thresholds than the old-old group. Among the young-old and old-old groups, women showed significantly lower recognition thresholds than males for sour, salty and bitter tastes, but there was no sex difference in the sweet taste threshold between the two groups. The present study confirmed that there are age and sex differences in taste sensitivity for the four basic tastes among young adult, young-old, and old-old Japanese, and that the sensitivity of sweet taste is more robust than the other tastes. Geriatr Gerontol Int 2016; 16: 1281-1288. © 2015 Japan Geriatrics Society.

On studying the young.

PubMed

Cottle, T J

1972-03-01

The process of studying youth culture is examined in terms of the consequence of the social and imaginative worlds of young people and those who study them. The impressions of the young, thus found, ultimately reveal to us insights into our own past, the relationship of generations, and the meaning of maturation. The ambivalence demonstrated by so many young people is discussed along with the difficulties this produces for observations of youth. Finally, mention is made of the importance of recognizing that studies of youth accentuate the tentativeness with which the results of social psychological studies must be held, and of resisting the temptation either to dehumanize young people through social scientific inquiries, or to overromanticize them to the extent that they themselves begin to question their own worth.

Longitudinal study examining the neurotoxicity of occupational exposure to aluminium-containing welding fumes.

PubMed

Buchta, M; Kiesswetter, E; Otto, A; Schaller, K H; Seeber, A; Hilla, W; Windorfer, K; Stork, J; Kuhlmann, A; Gefeller, O; Letzel, S

2003-09-01

The neurotoxicity of occupational exposure to aluminium (Al)-containing welding fumes has been discussed with controversial results. The aim of the longitudinal study was to examine a group of Al welders for significant central nervous changes in comparison with a non-exposed cohort. A group of 98 Al welders (mean age 37 years) in the car-body construction industry, with a median of 6 years of occupational exposure to Al welding fumes, and an education-matched, gender-matched, age-matched control group of 50 car-production workers (mean age 36 years) at the same plant, were included in this longitudinal study. Two cross-sectional studies were done in 1999 and 2001. In the second cross-sectional study 97 welders and 50 controls could be examined. The examination programme consisted, for example, of a standardised anamnesis, focussing on occupational history, education, illnesses, medication, accidents and current alcohol consumption, a physical examination that included neurological status, and the assessment of Al concentration in plasma and urine. The neurobehavioral methods included a symptom questionnaire, modified Q16, and computerised and non-computerised tests: psychomotor performance (steadiness, line tracing, aiming, tapping), verbal intelligence (WST), simple reaction time, digit span, block design (HAWIE), symbol-digit substitution, digit span, switching attention (European neurobehavioral evaluation system, EURO-NES), and standard progressive matrices. The data were analysed by multivariate analysis of covariance (MANCOVA) for repeated measurements with covariates age, education, and carbohydrate-deficient transferrin in plasma (CDT). RESULTS. The median Al urine concentration (mean preshift/postshift) was 52.4 microg/g creatinine (2001) and 57.6 microg/g creatinine (1999). Median respirable air dust was 0.67 mg/m(3) (2001) and 0.47 mg/m(3) (1999). Welders and controls did not report significantly more symptoms in the modified Q16. Furthermore, no

Evaluation of operational parameters role on the emission of fumes.

PubMed

Sajedifar, Javad; Kokabi, Amir Hossein; Farhang Dehghan, Somayeh; Mehri, Ahmad; Azam, Kamal; Golbabaei, Farideh

2017-12-12

Electric arc welding is a routine operation in the construction of metallic structures, but the fumes generated during the welding process can threaten the health of welders. Fumes are undesirable products of the majority of welding operations and may have various detrimental effects on health. The purpose of this study was to investigate the effect of operational parameters of the shielded metal arc welding (SMAW) process on the emission of fumes. A dust monitor was used to measure the number and mass concentration of fumes generated by SMAW. Measurements were made at the distances of 23cm (hood inlet) and 41cm (welder\\'s breathing zone) from the weld point, with different values assigned to three operational parameters, namely current intensity, travel speed, and heat input (HI). Number concentration (NC) decreased with the increase in particle size. The highest mass concentrations (MC) were observed for MC1 (0.35μm-0.5μm) and MC8 (Larger than 6.5μm). For reducing exposures to fumes, welders are recommended to use the lowest voltage and amperage and the highest travel speed to the extent that does not compromise in the quality of welds. For assessment of exposure to airborne particles in industrial workplaces and specially in welding operations, it is thought that taking, solely, mass concentration in to consideration and lack of attention to number concentration would not be able to reflect accurate assessment of the adverse effects of particles on the body organs.

Development of Welding Fumes Health Index (WFHI) for Welding Workplace’s Safety and Health Assessment

PubMed Central

HARIRI, Azian; PAIMAN, Nuur Azreen; LEMAN, Abdul Mutalib; MD. YUSOF, Mohammad Zainal

2014-01-01

Abstract Background This study aimed to develop an index that can rank welding workplace that associate well with possible health risk of welders. Methods Welding Fumes Health Index (WFHI) were developed based on data from case studies conducted in Plant 1 and Plant 2. Personal sampling of welding fumes to assess the concentration of metal constituents along with series of lung function tests was conducted. Fifteen metal constituents were investigated in each case study. Index values were derived from aggregation analysis of metal constituent concentration while significant lung functions were recognized through statistical analysis in each plant. Results The results showed none of the metal constituent concentration was exceeding the permissible exposure limit (PEL) for all plants. However, statistical analysis showed significant mean differences of lung functions between welders and non-welders. The index was then applied to one of the welding industry (Plant 3) for verification purpose. The developed index showed its promising ability to rank welding workplace, according to the multiple constituent concentrations of welding fumes that associates well with lung functions of the investigated welders. Conclusion There was possibility that some of the metal constituents were below the detection limit leading to ‘0’ value of sub index, thus the multiplicative form of aggregation model was not suitable for analysis. On the other hand, maximum or minimum operator forms suffer from compensation issues and were not considered in this study. PMID:25927034

Summary of retrospective asbestos and welding fume exposure estimates for a nuclear naval shipyard and their correlation with radiation exposure estimates.

PubMed

Zaebst, D D; Seel, E A; Yiin, J H; Nowlin, S J; Chen, P

2009-07-01

In support of a nested case-control study at a U.S. naval shipyard, the results of the reconstruction of historical exposures were summarized, and an analysis was undertaken to determine the impact of historical exposures to potential chemical confounders. The nested case-control study (N = 4388) primarily assessed the relationship between lung cancer and external ionizing radiation. Chemical confounders considered important were asbestos and welding fume (as iron oxide fume), and the chromium and nickel content of welding fume. Exposures to the potential confounders were estimated by an expert panel based on a set of quantitatively defined categories of exposure. Distributions of the estimated exposures and trends in exposures over time were examined for the study population. Scatter plots and Spearman rank correlation coefficients were used to assess the degree of association between the estimates of exposure to asbestos, welding fume, and ionizing radiation. Correlation coefficients were calculated separately for 0-, 15-, 20-, and 25-year time-lagged cumulative exposures, total radiation dose (which included medical X-ray dose) and occupational radiation dose. Exposed workers' estimated cumulative exposures to asbestos ranged from 0.01 fiber-days/cm(3) to just under 20,000 fiber-days/cm(3), with a median of 29.0 fiber-days/cm(3). Estimated cumulative exposures to welding fume ranged from 0.16 mg-days/m(3) to just over 30,000 mg-days/m(3), with a median of 603 mg-days/m(3). Spearman correlation coefficients between cumulative radiation dose and cumulative asbestos exposures ranged from 0.09 (occupational dose) to 0.47 (total radiation dose), and those between radiation and welding fume from 0.14 to 0.47. The estimates of relative risk for ionizing radiation and lung cancer were unchanged when lowest and highest estimates of asbestos and welding fume were considered. These results suggest a fairly large proportion of study population workers were exposed to

Military Readiness: Progress and Challenges in Implementing the Navy’s Optimized Fleet Response Plan

DTIC Science & Technology

2016-05-02

deployments for sailors and for the ship repair industrial base. They have also resulted in declining ship conditions across the fleet, and have...at shipyards.2 This report also describes Navy and industry officials’ perspectives on the impact that Navy installation and personnel security...and we interviewed officials at public and private shipyards involved in maintaining Navy ships. Additionally, we interviewed Navy and industry

Gaining Control of Occupational Injury and Illness in the U.S. Navy Civilian Work Force

DTIC Science & Technology

1990-01-16

developing survey instruments, interviews were conducted with key participants at the naval shipyards, naval public works center, naval air repair...currently in place at naval shipyards. After compiling data on those processes, NAVCAMPRO was developed in an effort to take control of the management of...physician. The attending physician participates with the physical therapist and supervisor in the development of a work -hardening program for the

Investigations for the improvement of space shuttle main engine electron beam welding equipment

NASA Technical Reports Server (NTRS)

Smock, R. A.; Taylor, R. A.; Wall, W. A., Jr.

1977-01-01

Progress made in the testing, evaluation, and correction of MSFC's 7.5 kW electron beam welder in support of space shuttle main engine component welding is summarized. The objective of this project was to locate and correct the deficiencies in the welder. Some 17 areas were deficient in the 7.5 kW ERI welding system and the associated corrective action was taken to improve its operational performance. An overall improvement of 20 times the original reliability was obtained at full rated capacity after the modifications were made.

Inspection apparatus for evaluating a partially completed weld

DOEpatents

Smartt, Herschel B.; Larsen, Eric D.; Johnson, Jonn A.

2001-01-01

An inspection apparatus for evaluating a partially completed weld is described and which is utilized in combination with an automated movable welder which moves across a supporting surface, and wherein the inspection apparatus includes a coupling member mounted on the welder; a frame member mounted on the coupling member; an ultrasonic sensor mounted on the frame member and disposed in ultrasonic sound transmitting relation relative to the partially completed weld; and a drive assembly for adjusting the position of the ultrasonic sensor relative to the partially completed weld.

Plasma Arc Welding: How it Works

NASA Technical Reports Server (NTRS)

Nunes, Arthur

2004-01-01

The physical principles of PAW from basic arcs to keyholing to variable polarity are outlined. A very brief account of the physics of PAW with an eye to the needs of a welder is presented. Understanding is usually (but not always) superior to handbooks and is required (unless dumb luck intervenes) for innovation. And, in any case, all welders by nature desire to know. A bit of history of the rise and fall of the Variable Polarity (VP) PA process in fabrication of the Space Shuttle External Tank is included.

Seminar on young child nutrition: improving nutrition and health status of young children in indonesia.

PubMed

Isabelle, Mia; Chan, Pauline

2011-01-01

The Seminar on Young Child Nutrition: Improving Nutrition and Health Status of Young Children in Indonesia held in Jakarta on November 2009 reviewed the current nutritional and health status of young children in Indonesia and identified key nutrient deficiencies affecting their optimal growth. The continuation of child growth from fetal stage is of paramount importance; and maternal and child health should be a central consideration in policy and strategy development. Clinical management of nutrient deficiency and malnutrition, as well as strategies and education to improve feeding practices of young Indonesian children were discussed in the seminar. Relevant experiences, approaches and strategies from France, New Zealand and Malaysia were also shared and followed with discussion on how regulatory systems can support the development of health policy for young children. This report highlights important information presented at the seminar.

Young carer awareness, identification and referral.

PubMed

Sprung, Sally; Laing, Michelle

2017-08-02

Young carers often provide care because they have always done so for the people they care about, and because they believe that the care recipient could not manage without them. For many young carers, looking after their own health, combining caring with schoolwork, getting access to training or having time off from carer duties can be a major challenge ( Department of Health [DH], 2008 ). This paper presents evidence from a literature review that builds a substantial body of knowledge to suggest that community nursing teams must develop supportive approaches towards increasing an awareness of young carers' needs. Identification of young carers by community nurses will encourage referral to appropriate services and agencies. The aim of this study was to appraise, for the Queen's Nursing Institute, the published evidence base to explore young carers' needs and how community nurses could support young carers' needs in England. Databases were systematically searched. Title and abstract reviews found 606 potential studies (see Figure 1 ), which were identified around topics corresponding to the headings of three distinct categories: mental health and wellbeing; education needs and resilience; and development of coping strategies. Full-text review resulted in 26 publications that met the study's inclusion criteria. The results of this work show that there is a scarcity of publications around the community nursing needs of young carers. However, studies consistently report young carers are hidden from view and have a significant requirement for support and information. Therefore, effective ways of delivering community nursing support and information to young carers needs to be developed by service providers as a matter of priority, and implemented to give the support that young carers need.

Welding occupations and mortality from Parkinson's disease and other neurodegenerative diseases among United States men, 1985-1999.

PubMed

Stampfer, Meir J

2009-05-01

Metal welding produces gaseous fumes that contain manganese, resulting in potential occupational exposure to welders. It has been hypothesized that occupational exposure among welders could increase risk of Parkinson's disease and other neurodegenerative diseases. The present study examines welding occupation and mortality from neurodegenerative diseases among men in the United States using the National Cause of Death databases 1985 to 1999. Information was abstracted from death certificates for states that collected data on occupation. Of 4,252,490 men who died during the study period, 107,773 had welding-related occupations. Multivariable logistic regression models were used to calculate mortality odds ratios (MOR) and 95% confidence intervals (CI) for odds of dying from Parkinson's disease or other neurodegenerative diseases among men who were welders as compared with men of other occupations, adjusting for attained age, race, region of residence, and year of death. During the study period, 49,174 deaths were attributed to Parkinson's disease, 54,892 to Alzheimer's disease, and 19,018 to presenile dementia. There was no evidence of an increased odds of Parkinson's disease mortality among welders as compared with men with other occupations (MOR = 0.83, 95% CI 0.78-0.88). Furthermore, welding occupation was unrelated to the odds of mortality from Alzheimer's disease (MOR = 0.94, 95% CI 0.89-1.00) or presenile dementia (MOR = 0.96, 95% CI 0.87-1.06). Earlier research suggested that welding exposures could predispose individuals to earlier onset Parkinson's disease. However, there was no evidence in this data of an increased mortality odds ratio associated with welding occupations among men younger than 65 (MOR = 1.03, 95% CI 0.74-1.44); while there was a suggestion of a lower odds Parkinson's disease death among men age 65 years and older (MOR = 0.82, 95% CI 0.77-0.88). Data from this large study do not support an association between welding occupations and death

Oxidative stress, telomere shortening, and DNA methylation in relation to low‐to‐moderate occupational exposure to welding fumes

PubMed Central

Li, Huiqi; Hedmer, Maria; Wojdacz, Tomasz; Hossain, Mohammad Bakhtiar; Lindh, Christian H.; Tinnerberg, Håkan; Albin, Maria

2015-01-01

Evidence suggests that exposure to welding fumes is a risk factor for lung cancer. We examined relationships between low‐to‐moderate occupational exposure to particles from welding fumes and cancer‐related biomarkers for oxidative stress, changes in telomere length, and alterations in DNA methylation. We enrolled 101 welders and 127 controls (all currently nonsmoking men) from southern Sweden. We performed personal sampling of respirable dust and measured 8‐oxodG concentrations in urine using a simplified liquid chromatography tandem mass spectrometry method. Telomere length in peripheral blood was measured by quantitative polymerase chain reaction. Methylation status of 10 tumor suppressor genes was determined by methylation‐sensitive high‐resolution melting analysis. All analyses were adjusted for age, body mass index, previous smoking, passive smoking, current residence, and wood burning stove/boiler at home. Welders were exposed to respirable dust at 1.2 mg/m3 (standard deviation, 3.3 mg/m3; range, 0.1–19.3), whereas control exposures did not exceed 0.1 mg/m3 (P < 0.001). Welders and controls did not differ in 8‐oxodG levels (β = 1.2, P = 0.17) or relative telomere length (β = −0.053, P = 0.083) in adjusted models. Welders showed higher probability of adenomatous polyposis coli (APC) methylation in the unadjusted model (odds ratio = 14, P = 0.014), but this was not significant in the fully adjusted model (P = 0.052). Every working year as a welder was associated with 0.0066 units shorter telomeres (95% confidence interval −0.013 to −0.00053, P = 0.033). Although there were no clear associations between concentrations of respirable dust and the biomarkers, there were modest signs of associations between oxidative stress, telomere alterations, DNA methylation, and occupational exposure to low‐to‐moderate levels of particles. Environ. Mol. Mutagen. 56:684–693, 2015. © 2015 The Authors

Elevated levels of DNA-protein crosslinks and micronuclei in peripheral lymphocytes of tannery workers exposed to trivalent chromium.

PubMed

Medeiros, M G; Rodrigues, A S; Batoréu, M C; Laires, A; Rueff, J; Zhitkovich, A

2003-01-01

DNA-protein crosslinks (DPC) are a promising biomarker of exposure to hexavalent chromium, a known human carcinogen. Although trivalent chromium is considered to have much lower toxicity, the risk involved in chronic exposure is uncertain. DPC may be a useful tool in clarifying this risk, by signaling an exposure of body tissues to biologically active forms of chromium. DPC quantification was carried out in lymphocytes of a group of tannery workers exposed to trivalent chromium, a small group of manual metal arc stainless steel welders exposed to hexavalent chromium and a control group. This biomarker was compared with the frequency of micronuclei in cytokinesis blocked peripheral lymphocytes as a biomarker of cytogenetic lesions and total plasma and urine chromium levels as an index of exposure. The results indicate a significant increase in the formation of DPC in tannery workers compared with controls (0.88 +/- 0.19 versus 0.57 +/- 0.21%, P < 0.001, Mann-Whitney test) and an even higher level of DPC in welders (2.22 +/- 1.12%, P = 0.03). Tanners showed a significant increase in micronucleated cells compared with controls (6.35 +/- 2.94 versus 3.58 +/- 1.69 per thousand, P < 0.01), whereas in welders this increase was not significant (5.40 +/- 1.67 per thousand ). Urinary chromium was increased in both groups, with a greater increase observed in tanners compared with controls (2.63 +/- 1.62 versus 0.70 +/- 0.38 microg/g creatinine, P < 0.001) than in welders (1.90 +/- 0.37 microg/g creatinine, P < 0.005). Plasma chromium was also increased in both groups (tanners 2.43 +/- 2.11 microg/l, P < 0.001, welders 1.55 +/- 0.67 microg/l, P < 0.005 versus controls 0.41 +/- 0.11 microg/l). In summary, chronic occupational exposure to trivalent chromium can lead to a detectable increase in lymphocyte DNA damage which correlates with a significant exposure of the cells to the metal.

Someone to talk to: young mothers' experiences of participating in a young parents support programme.

PubMed

Mills, Annie; Schmied, Virginia; Taylor, Christine; Dahlen, Hannah; Shuiringa, Wies; Hudson, Margaret E

2013-09-01

To identify young parents' perceptions and experiences of a parenting support programme, run by a non-government organisation, which provided both community group-based, and one-on-one home visiting, support. A qualitative descriptive study was conducted in one of the most socio-economically disadvantaged areas of Sydney, NSW; this is also an area with one of the highest percentage of births among young parents. Young parents were eligible to participate whether they attended one of the parenting groups and/or received professional home visiting through the young parents programme. Eighteen young women were interviewed, and a further ten participated in a focus group. Thematic analysis of the focus groups and interviews was undertaken. Four themes were identified in the analysis: 'someone I know and trust', 'we just talk about anything and everything', 'doing the personal' and 'getting out and relaxing'. These themes were linked through the common thread of relationships; the relationships between themselves and other young mothers, and with the workers on the programme. The characteristics of the person with whom they had a relationship, the type of relationship, the content of their interactions and the benefits of these relationships were all important. This study is limited by the small sample size and the 'low risk' status of the young parents who engaged in the programme. This study demonstrated not only the importance for young parents of all forms of interaction, whether it is one-on-one, in a group or social networking; but most importantly, the benefits of having someone to talk to. © 2012 The Authors. Scandinavian Journal of Caring Sciences © 2012 Nordic College of Caring Science.

Self-rated quality of life among the young unemployed and the young in work in northern Sweden.

PubMed

Hultman, Barbro; Hemlin, Sven

2008-01-01

This study analysed self-assessed quality of life (QoL), using a QoL questionnaire (Hörnquist's QLcs) covering life spheres, somatic health, mental well-being, cognitive ability, social and family life, activity, financial situation, meaning in life and a global score "entire life", for young people aged 18-24 in a population-based cross-sectional study in northern Sweden. Of these, 651 were unemployed and 2802 were in work (employed, students and in military service). Results showed that the young unemployed exhibited poorer QoL than the young in work and the greatest difference was found regarding their financial situation. Young men rated somatic health and mental well-being higher than young women. However, QoL in other essential domains was rated higher by young women in work. Close friends and money reserve were important for all participants, no matter whether they were employed or not. The risk of being young and unemployed was greater if the person had a worse financial situation, shorter education, and fewer leisure activities with other people. Finally, it was concluded that while QoL is poorer when in unemployment - both for the young and those who are older (aged 25-64) - psychological well-being, in contrast to several previous studies, is even poorer for young people than for those who are older. This is worrying in a public health perspective and could have implications for unemployment policies for younger and less well-educated age groups.

Caring for Young People Who Self-Harm: A Review of Perspectives from Families and Young People

PubMed Central

Curtis, Sophie; Thorn, Pinar; McRoberts, Alison; Hetrick, Sarah

2018-01-01

Self-harm among young people remains largely stigmatised and misunderstood. Parents have been identified as key facilitators in the help-seeking process, yet they typically report feeling ill-equipped to support the young person in their care. The aim of this review was to examine the perspectives of both young people (aged 12–28) and parents and to develop the conceptual framework for a future qualitative study. A systematic search of MEDLINE and PsycINFO was performed to identify articles that focused on the experiences of family members and young people related to managing the discovery of self-harm. Fourteen articles were included for review. Four addressed the perspectives of young people and 10 reported on the impact of adolescent self-harm on parents. The impact of self-harm is substantial and there exists a discrepancy between the most common parental responses and the preferences of young people. In addition, parents are often reluctant to seek help for themselves due to feelings of shame and guilt. This highlights the need for accessible resources that seek to alleviate parents’ distress, influence the strategies implemented to manage the young person’s self-harm behaviour, reduce self-blame of family members, and increase the likelihood of parental help seeking. PMID:29747476

Caring for Young People Who Self-Harm: A Review of Perspectives from Families and Young People.

PubMed

Curtis, Sophie; Thorn, Pinar; McRoberts, Alison; Hetrick, Sarah; Rice, Simon; Robinson, Jo

2018-05-10

Self-harm among young people remains largely stigmatised and misunderstood. Parents have been identified as key facilitators in the help-seeking process, yet they typically report feeling ill-equipped to support the young person in their care. The aim of this review was to examine the perspectives of both young people (aged 12⁻28) and parents and to develop the conceptual framework for a future qualitative study. A systematic search of MEDLINE and PsycINFO was performed to identify articles that focused on the experiences of family members and young people related to managing the discovery of self-harm. Fourteen articles were included for review. Four addressed the perspectives of young people and 10 reported on the impact of adolescent self-harm on parents. The impact of self-harm is substantial and there exists a discrepancy between the most common parental responses and the preferences of young people. In addition, parents are often reluctant to seek help for themselves due to feelings of shame and guilt. This highlights the need for accessible resources that seek to alleviate parents’ distress, influence the strategies implemented to manage the young person’s self-harm behaviour, reduce self-blame of family members, and increase the likelihood of parental help seeking.

Timing of Reflexive Visuospatial Orienting in Young, Young-Old, and Old-Old Adults

PubMed Central

Langley, Linda K.; Friesen, Chris Kelland; Saville, Alyson L.; Ciernia, Annie T.

2012-01-01

This study examined adult age differences in reflexive orienting to two types of uninformative spatial cues: central arrows and peripheral onsets. In two experiments using a Posner cuing task, young adults (ages 18 – 28 yrs), young-old adults (ages 60 – 74 yrs), and old-old adults (ages 75 – 92 yrs) responded to targets that were preceded 100–1,000 ms earlier by a central arrow or a peripheral abrupt onset. In Experiment 1, the cue remained present upon target onset. Facilitation effects at early cue-target stimulus onset asynchronies (SOAs) were prolonged in duration for the two older groups relative to the young adults. At later cue-target SOAs, inhibition of return (IOR) that was initiated by peripheral onset cues was observed in the performance of young adults but not in that of the two older groups. In Experiment 2, the cue was presented briefly and removed prior to target onset. The change in cue duration minimized age differences (particularly for young-old adults) in facilitation effects and led to IOR for all three age groups. The findings are consistent with the idea that attentional control settings change with age, with higher settings for older adults leading to delayed disengagement from spatial cues. PMID:21394555

3. ELEVATIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. ELEVATIONS, ADDITION TO POWER HOUSE. United Engineering Company Ltd., Alameda Shipyard. John Hudspeth, architect, foot of Main Street, Alameda, California. Sheet 4. Plan no. 10,548. Scale 1/4 inch to the foot, elevations, and one inch to the foot, sections and details. April 30, 1945, last revised 6/19/45. pencil on vellum - United Engineering Company Shipyard, Boiler House, 2900 Main Street, Alameda, Alameda County, CA

ALTERATIONS AND ADDITIONS TO THE GATE HOUSE, United Engineering Company ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ALTERATIONS AND ADDITIONS TO THE GATE HOUSE, United Engineering Company Ltd., Alameda Shipyard. Plan, elevations, and details of expanded structure. No architect noted. Drawn by "J.B.H." (John Hudspeth?). Sheet 2 of 2. Plan no. 10,504. Scale 1/4 inch to the foot. November 28, 1942, last revised 5/5/45. pencil on vellum - United Engineering Company Shipyard, Gate House, 2900 Main Street, Alameda, Alameda County, CA

The National Shipbuilding Research Program. Document Technologies Available to Clean Brackish Waters to 50 PPT TBT Levels

DTIC Science & Technology

1997-12-01

State-of-The-Practice Treatment Technologies For Reducing Concentrations of O rganotin Compounds in Wastewater Executive Summary The purpose of this...study is to identify practical technology that can be used by shipyards to remove tributyltin (TBT) from large volumes of water to levels below 50 parts... water treatment technologies that may be effective in reducing TBT concentrations in waste streams, these technologies have not been applied to shipyard

13. Photocopy of 1920 drawing titled: BUILDING 78, 3RD FLOOR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Photocopy of 1920 drawing titled: BUILDING 78, 3RD FLOOR BALCONY AND FIRE ESCAPES, including plans for skylight and North Elevation. HABS photograph is an 8x10' contact print made from a high contrast negative of an enlargement made from microfiche. Original is in the collection of Department of Public Works, Puget Sound Naval Shipyard, Bremerton, WA. - Puget Sound Naval Shipyard, Administration Building, Farragut Avenue, Bremerton, Kitsap County, WA

The National Shipbuilding Research Program. Environmental Studies and Testing (Phase IV)

DTIC Science & Technology

2000-11-15

Subtask responded to the action taken by the State of Virginia to incorporate limitations of 50 parts per trillion TBT ( tributyltin ) in shipyard...Funds actually expended totaled $6,750. Subtask #22 - Document Technologies Available to Clean Brackish Waters to 50 parts per trillion TBT Levels. This...Subtask concluded that there were NO technologies extant to achieve a reduction in shipyard effluent TBT to below 50 ppt. This has become an

Joining Pipe with the Hybrid Laser-GMAW Process: Weld Test Results and Cost Analysis

DTIC Science & Technology

2006-06-01

Recent work investigating the poten- tial benefit of applying this technology to a shipyard pipe shop suggests that signifi- cant cost savings may be...arc-based joining processes. With recent advances in com- mercial laser technology , laser suppliers can now deliver dramatically higher power systems...reasons, shipyards in the U.S. are showing growing interest in hybrid laser-GMA welding technology . Hybrid Laser-GMA for Joining Pipe Welding of pipe

Chlamydia trachomatis screening in young women.

PubMed

Baraitser, Paula; Alexander, Sarah; Sheringham, Jessica

2011-10-01

As the number of chlamydia screening programmes implemented worldwide increases, we summarize current understanding of the epidemiology, natural history, and management of chlamydia, focusing on screening in young women. Chlamydia diagnoses continue to rise, with young women at high risk. Recently published trials show that the risk of serious reproductive health outcomes is lower than previously thought. They illustrate that significant barriers - both practical and cultural - remain to engaging young people and health professionals in routine testing for sexually transmitted infections. Chlamydia control efforts have driven innovative approaches to testing including new approaches to engaging young people in discussions of sexual health and screening accessed via the Internet. Chlamydia is highly prevalent among young women and may cause serious reproductive sequelae. Gaps in our knowledge of the epidemiology, natural history and immunology of this organism continue to hamper efforts to control it. Sexual health promotion and screening of young people remain the mainstay of population control, although there is as yet no strong evidence of health screening benefits. Control efforts will require new strategies to engage young people and health professionals to normalize sexual health testing. (C) 2011 Lippincott Williams & Wilkins, Inc.

Spine problems in young athletes.

PubMed

Sucato, Daniel J; Micheli, Lyle J; Estes, A Reed; Tolo, Vernon T

2012-01-01

As the number of young people involved in sports activities increases, acute and chronic back pain has become more common. With a careful medical history and physical examination, along with the judicious use of imaging modalities, the causes of back pain can be correctly diagnosed and treated so that young athletes can quickly return to sports participation. Although most back pain in these young patients is muscular in origin, findings that should trigger increased concern include night pain, marked hamstring tightness, pain with lumbar spine hyperextension, or any neurologic finding. When recently developed vague back pain is present, a delay in radiographic imaging is warranted. With new back pain after trauma, AP and lateral radiographs of the symptomatic spinal area are indicated. CT, bone scans, and MRI should be reserved for special circumstances. Spondylolysis is the most common bony cause of back pain in young athletes. Spondylolysis can be treated with activity limitation, a specific exercise program, a thoracolumbar orthosis, and/or surgery. Treatment should be based on the amount of pain as well as the desire of the young athlete to continue in the sports activity that caused the pain. Other significant causes of back pain that require more extensive treatment in these young athletes include spondylolisthesis, lumbar disk disorders, and sacral stress fractures. It is anticipated that nearly all young athletes can return to sports activity after successful treatment. Even if surgical treatment is needed, return to all sports is expected, with the occasional exception of collision sports.