The Zagros hinterland fold-and-thrust belt in-sequence thrusting, Iran

NASA Astrophysics Data System (ADS)

Sarkarinejad, Khalil; Ghanbarian, Mohammad Ali

2014-05-01

The collision of the Iranian microcontinent with the Afro-Arabian continent resulted in the deformation of the Zagros orogenic belt. The foreland of this belt in the Persian Gulf and Arabian platform has been investigated for its petroleum and gas resource potentials, but the Zagros hinterland is poorly investigated and our knowledge about its deformation is much less than other parts of this orogen. Therefore, this work presents a new geological map, stratigraphic column and two detailed geological cross sections. This study indicates the presence of a hinterland fold-and-thrust belt on northeastern side of the Zagros orogenic core that consists of in-sequence thrusting and basement involvement in this important part of the Zagros hinterland. The in-sequence thrusting resulted in first- and second-order duplex systems, Mode I fault-bend folding, fault-propagation folding and asymmetric detachment folding which indicate close relationships between folding and thrusting. Study of fault-bend folds shows that layer-parallel simple shear has the same role in the southeastern and northwestern parts of the study area (αe = 23.4 ± 9.1°). A major lateral ramp in the basement beneath the Talaee plain with about one kilometer of vertical offset formed parallel to the SW movement direction and perpendicular to the major folding and thrusting.

Orogenic plateau growth: Expansion of the Turkish-Iranian Plateau across the Zagros fold-and-thrust belt

NASA Astrophysics Data System (ADS)

Allen, M. B.; Saville, C.; Blanc, E. J.-P.; Talebian, M.; Nissen, E.

2013-03-01

This paper shows how the Turkish-Iranian Plateau grows laterally by incrementally incorporating adjacent parts of the Zagros fold-and-thrust belt. The limit of significant, seismogenic, thrusting in the Zagros (Mw > 5) occurs close to the regional 1250 m elevation contour. The seismicity cutoff is not a significant bedrock geology boundary. Elevations increase northward, toward regional plateau elevations of 2 km, implying that another process produced the extra elevation. Between the seismogenic limit of thrusting and the suture, this process is a plausibly ductile thickening of the basement, suggesting depth-dependent strain during compression. Similar depth-dependant crustal strain may explain why the Tibetan plateau has regional elevations 1500 m greater than the elevation limit of seismogenic thrusting at its margins. We estimate 68 km shortening across the Zagros Simply Folded Belt in the Fars region, and 120 km total shortening of the Arabian plate. The Dezful Embayment is a low strain zone in the western Zagros. Deformation is more intense to its northeast, in the Bakhtyari Culmination. The orogenic taper (across strike topographic gradient) across the Dezful Embayment is 0.0004, and across the Bakhtyari Culmination, 0.022. Lateral plateau growth is more pronounced farther east (Fars), where a more uniform structure has a taper of 0.010 up to elevations of 1750 m. A >100 km wide region of the Zagros further northeast has a taper of 0.002 and is effectively part of the Turkish-Iranian Plateau. Internal drainage enhances plateau development but is not a pre-requisite. Aspects of the seismicity, structure, and geomorphology of the Zagros do not support critical taper models for fold-and-thrust belts.

Tectonics versus eustatic control on supersequences of the Zagros Mountains of Iran

NASA Astrophysics Data System (ADS)

Heydari, Ezat

2008-04-01

At least 12 km of strata ranging in age from the latest Precambrian to the Recent are exposed in the Zagros Mountains of Iran. This sedimentary cover is characterized by distinct stratal packages separated by major unconformities forming twelve supersequences. They are informally named as: (1) Late Precambrian - Cambrian Hakhamanesh Supersequence, (2) Ordovician Kourosh Supersequence, (3) Silurian Camboojiyeh Supersequence, (4) Devonian Darioush Supersequence, (5) Mississippian - Pennsylvanian Khashayar Supersequence, (6) Permian - Triassic Ashk Supersequence, (7) Jurassic Farhad Supersequence, (8) Early Cretaceous Mehrdad Supersequence, (9) Late Cretaceous Ardavan Supersequence, (10) Paleocene - Oligocene Sassan Supersequence, (11) Oligocene - Miocene Ardeshir Supersequence, and (12) Miocene - Pleistocene Shapour Supersequence. These supersequences and their correlatives in neighboring areas have been used to infer tectonic events. The dominant interpretation has been that local or regional epeirogenic movements were responsible for the formation of these supersequences. Unconformities are considered as indications that epeirogenic movements associated with tectonic events affected the area. The present investigation provides an alternative to the established view of the Phanerozoic supersequences of the Zagros Mountains. A good correlation exists between the lithofacies of supersequences in the Zagros Mountains and the second-order eustatic sea-level changes. Deposition of deep-water, marine shales occurred during periods of eustatic sea-level rise. Platform-wide unconformities coincided with eustatic sea-level lows. In fact, supersequences of the Zagros Mountains are nearly identical to those described from the North American Craton and the Russian Platform suggesting that these stratal packages are global. These observations suggest that supersequences of the Zagros Mountains formed by second order eustatic sea-level changes and not by local or regional epeirogenic movements. Although tectonic events did not produce supersequences of the Zagros Mountains, they influenced regional lithofacies patterns through the formation of intrashelf depressions such as the Hormoz Salt Basin during the Precambrian and the Dezful Embayment and the Lorestan Basin during the Mesozoic. Tectonic events also affected sedimentation during the Tertiary collision of Arabia and the Central Iran microplate through uplift, erosion, and the formation of the Zagros Foreland Basin. The results of this investigation necessitate a re-evaluation of the role and the significance of pre-Tertiary tectonic events commonly used to interpret the geological evolution of the Zagros Mountains.

Zagros Mountains, Iran, SRTM Shaded Relief Anaglyph

NASA Image and Video Library

2004-06-17

The Zagros Mountains in Iran offer a visually stunning topographic display of geologic structure in layered sedimentary rocks in this anaglyph from NASA Shuttle Radar Topography Mission. 3D glasses are necessary to view this image.

Source Parameters for Moderate Earthquakes in the Zagros Mountains with Implications for the Depth Extent of Seismicity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, A; Brazier, R; Nyblade, A

2009-02-23

Six earthquakes within the Zagros Mountains with magnitudes between 4.9 and 5.7 have been studied to determine their source parameters. These events were selected for study because they were reported in open catalogs to have lower crustal or upper mantle source depths and because they occurred within an area of the Zagros Mountains where crustal velocity structure has been constrained by previous studies. Moment tensor inversion of regional broadband waveforms have been combined with forward modeling of depth phases on short period teleseismic waveforms to constrain source depths and moment tensors. Our results show that all six events nucleated withinmore » the upper crust (<11 km depth) and have thrust mechanisms. This finding supports other studies that call into question the existence of lower crustal or mantle events beneath the Zagros Mountains.« less

First-order control of syntectonic sedimentation on crustal-scale structure of mountain belts

NASA Astrophysics Data System (ADS)

Erdős, Zoltán.; Huismans, Ritske S.; van der Beek, Peter

2015-07-01

The first-order characteristics of collisional mountain belts and the potential feedback with surface processes are predicted by critical taper theory. While the feedback between erosion and mountain belt structure has been fairly extensively studied, less attention has been given to the potential role of synorogenic deposition. For thin-skinned fold-and-thrust belts, recent studies indicate a strong control of syntectonic deposition on structure, as sedimentation tends to stabilize the thin-skinned wedge. However, the factors controlling basement deformation below fold-and-thrust belts, as evident, for example, in the Zagros Mountains or in the Swiss Alps, remain largely unknown. Previous work has suggested that such variations in orogenic structure may be explained by the thermotectonic "age" of the deforming lithosphere and hence its rheology. Here we demonstrate that sediment loading of the foreland basin area provides an additional control and may explain the variable basement involvement in orogenic belts. When examining the role of sedimentation, we identify two end-members: (1) sediment-starved orogenic systems with thick-skinned basement deformation in an axial orogenic core and thin-skinned deformation in the bordering forelands and (2) sediment-loaded orogens with thick packages of synorogenic deposits, derived from the axial basement zone, deposited on the surrounding foreland fold-and-thrust belts, and characterized by basement deformation below the foreland. Using high-resolution thermomechanical models, we demonstrate a strong feedback between deposition and crustal-scale thick-skinned deformation. Our results show that the loading effects of syntectonic sediments lead to long crustal-scale thrust sheets beneath the orogenic foreland and explain the contrasting characteristics of sediment-starved and sediment-loaded orogens, showing for the first time how both thin- and thick-skinned crustal deformations are linked to sediment deposition in these orogenic systems. We show that the observed model behavior is consistent with observations from a number of natural orogenic systems.

The 2013 Mw 6.2 Khaki-Shonbe (Iran) Earthquake: Seismic Shortening of the Zagros Sedimentary Cover

NASA Astrophysics Data System (ADS)

Elliott, J. R.; Bergman, E.; Copley, A.; Ghods, A.; Nissen, E.; Oveisi, B.; Walters, R. J.

2014-12-01

The 2013 Mw 6.2 Khaki-Shonbe earthquake occurred in the Simply Folded Belt of the Zagros Mountains, Iran. This is the largest earthquake in the Zagros since the November 1990 Mw 6.4 Furg (Hormozgan) thrust faulting event, and therefore the largest in the period for which dense InSAR ground displacements are available. It is also the biggest seismic event to have occurred in the Simply Folded Belt since the March 1977 Mw 6.7 Khurgu earthquake. This earthquake therefore potentially provides valuable insights into a range of controversies: (1) the preponderance of earthquake faulting in the crystalline basement versus the sedimentary cover and the potential importance of lithology in controlling and limiting seismic rupture; (2) the nature of surface folding and whether or not there is a one-to-one relationship between buried reverse faults and surface anticlines; and (3) the presence or absence of large pulses of aseismic slip triggered by mainshock rupture. We combine seismological solutions and aftershock relocations with satellite interferometric ground displacements and observations from the field to determine the geometry of faulting and its relationship with the structure, stratigraphy and tectonics of the Central Zagros. The earthquake rupture involved reverse slip on two along-strike southwest dipping fault segments, the rupture initiating at the northern and bottom end of the larger north-west segment. These faults verge away from the foreland and towards the high range interior, contrary to the fault geometries depicted in many structural cross-sections of the Zagros. The slip measured on the reverse segments occurred over two mutually exclusive depth ranges, 10-5 km and 4-2 km, resulting in long (16 km), narrow (7 km) rupture segments. Conversely, aftershocks are found to cluster in the depth range 8-16 km, beneath the main rupture segment. This indicates only significant reverse slip and coseismic shortening in the sedimentary cover, with the slip distribution likely to be lithologically controlled in depth by the Hormuz salt at the base of the sedimentary cover, and the Kazhdumi Formation mudrocks at upper-levels (5 km), and aftershocks constrained largely beneath the main coseismic rupture planes.

Discussion on ``Dextral transpression in Late Cretaceous continental collision, Sanandaj Sirjan Zone, western Iran'' [Journal of Structural Geology, 22(8) (2000) 1125 1139

NASA Astrophysics Data System (ADS)

Numan, Nazar M. S.

2001-12-01

The NW-SE trending Alpine Zagros Thrust Belt passes from southwest Iran into northeastern Iraq. Mohajjel and Fergusson contend in their work in Iran on the Sanandaj-Sirjan Zone (with a consistent Zagros trend) that collision of the Afro-Arabian continent and the Iranian microcontinent took place in the Late Cretaceous. It seems that tectonostratigraphic evidence from the neighbouring Iraqi territories, namely the Zagros Thrust Belt in the northern part, the Foreland Belt and the Quasiplatform of the north and the Platform in the western and southern deserts (Fig. 1), chronicles the subductional history in this part of the world to a fair degree of accuracy. It rather provides for an Eocene age of the continental collision between Arabia and the Iranian microcontinent.

Uplift of Zagros Mountains slows plate convergence

NASA Astrophysics Data System (ADS)

Balcerak, Ernie

2013-05-01

Research has indicated that mountain ranges can slow down the convergence between two tectonic plates on timescales as short as a few million years, as the growing mountains provide enough tectonic force to impact plate motions. Focusing on the convergence of the Arabian and Eurasian plates at the Zagros mountain range, which runs across Iran and Iraq, Austermann and Iaffaldano reconstructed the relative motion of the plates using published paleomagnetic data covering the past 13 million years, as well as current geodetic measurements. They show that the convergence of the two plates has decreased by about 30% over the past 5 million years. Looking at the geological record to infer past topography and using a computer model of the mantle-lithosphere system, the authors examined whether the recent uplift across the Zagros Mountains could have caused the observed slowdown. They also considered several other geological events that might have influenced the convergence rate, but the authors were able to rule those out as dominant controls. The authors conclude that the uplift across the Zagros Mountains in the past 5 million years did indeed play a key role in slowing down the convergence between the Eurasian and Arabian plates. (Tectonics, doi:10.1002/tect.20027, 2013)

Morphotectonic aspects of active folding in Zagros Mountains (Fin, SE of Iran)

NASA Astrophysics Data System (ADS)

Roustaei, M.; Abbasi, M.

2008-05-01

Active deformation in Iran, structural province of Zagros is a result of the convergence between the Arabian & Eurasian plates. The Zagros Mountains in southern Iran are one of the seismically active region & is introduced as fold-thrust belt trending NW-SE within the Arabian plate. Fin lies in Hormozgan province; the south of Iran. The vastness is surrounded by central Iran in the north, High Zagros in the North West and west, Folded Zagros in the east, Makran in the south east and Persian Gulf in the south. The study area is determined by complex structures, alternation of folding, salt diapers and faulting. The surface geology mainly comprises Neogene; Marls, Conglomerate, Sandstones (Mishan, Aghajari, Bakhtiyari formations), old fans and alluvium as syncline that Shur River cuts its north limb and passes from the middle of core .The older formations( Ghachsaran, Rzak and Guri member) folded into prominent anticlines. The fold axes mostly follow the parallel trends .Folds trending are NW-SE (Tashkend anticline), NE-SW (Khur anticline), E-W (Guniz & Handun anticline) and the trend of axes Baz fold in the main part is E-W. Hormoz salt also outcrops in the cores of many whaleback anticlines. Thus, anticlines may be cored with evaporates, even though no salt is currently exposed at the surface. Reason of selecting this area as an example referred to active seismcity. Release of energy is gradually in every events, this seismic character cusses that there was not earthquake with high magnitude in the area but it can not be a role. Answer to the question concerning relationship between folding of the crust layer and faulting at depth is more difficult. There is 2 terms to describe this relationship; "detachment folds" and" forced folds". In this paper, we try to analysis of different satellite imagery; Aster, spot and digital elevation model with high resolution (10 m) in order to detect geomorphic indicators which can help us to find a relationship between faulting and folding in the Fin area and interprate the seismcity.

Link between Neogene and modern sedimentary environments in the Zagros foreland basin

NASA Astrophysics Data System (ADS)

Pirouz, Mortaza; Simpson, Guy; Bahroudi, Abbas

2010-05-01

The Zagros mountain belt, with a length of 1800 km, is located in the south of Iran and was produced by collision between the Arabian plate and the Iran micro plate some time in the early Tertiary. After collision, the Zagros carbonate-dominated sedimentary basin has been replaced by a largely clastic system. The Neogene Zagros foreland basin comprises four main depositional environments which reflect the progressive southward migration of the deformation front with time. The oldest unit - the Gachsaran formation - is clastic in the northern part of the basin, but is dominated by evaporates in southern part, being deposited in a supratidal Sabkha-type environment. Overlying the Gachsaran is the Mishan formation, which is characterized by the Guri limestone member at the base, overlain by marine green marls. The thickness of the Guri member increases dramatically towards the southeast. The next youngest unit is the Aghajari Formation which consists of well sorted lenticular sandstone bodies in a red silty-mudstone. This formation is interpreted as representing the floodplain of dominantly meandering rivers. Finally, the Bakhtiari formation consists of mainly coarse-grained gravel sheets which are interpreted to represent braided river deposits. Each of these Neogene depositional environments has a modern day equivalent. For example, the braided rivers presently active in the Zagros mountains are modern analogues of the Bakhtiari. In the downstream direction, these braided rivers become meandering systems, which are equivalents of the Aghajari. Eventually, the meandering rivers meet the Persian gulf which is the site of the ‘modern day' Mishan shallow marine marls. Finally, the modern carbonate system on the southern margin of Persian Gulf represents the Guri member paleo-environment, behind which Sabkha-type deposits similar to the Gachsaran are presently being deposited. One important implication of this link between the Neogene foreland basin deposits and the modern environments is that all formation boundaries are strongly diachronous. Thus, for example, although the Mishan is Burdigalian-Messinian in regions where it is currently undergoing subaerial erosion in the Fars zone, it is presumably still forming today in the modern Persian gulf foredeep.

Balancing cross-sections combining field work and remote sensing data using LithoTect software in the Zagros fold-and-thrust belt, N Iraq.

NASA Astrophysics Data System (ADS)

Reif, Daniel; Grasemann, Bernhard; Lockhart, Duncan

2010-05-01

The Zagros fold-and-thrust belt has formed in detached Phanerozoic sedimentary cover rocks above a shortened crystalline Precambrian basement and evolved through the Late Cretaceous to Miocene collision between the Arabian and Eurasian plate, during which the Neotethys oceanic basin was closed. Deformation is partitioned in SW directed folding and thrusting of the sediments and NW-SE to N-S trending dextral strike slip faults. The sub-cylindrical doubly-plunging fold trains with wavelengths of 5 - 10 km host more than half of the world's hydrocarbon reserves in mostly anticlinal traps. Generally the Zagros is divided into three NW-SE striking tectonic units: the Zagros Imbricate Zone, the Zagros Simply Folded Belt and the Zagros Foredeep. This work presents a balanced cross-section through the Simply Folded Belt, NE of the city of Erbil (Kurdistan, Iraq). The regional stratigraphy comprises mainly Cretaceous to Cenozoic folded sediments consisting of massive, carbonate rocks (limestones, dolomites), reacting as competent layers during folding compared to the incompetent behavior of interlayered siltstones, claystones and marls. Although the overall security situation in Kurdistan is much better than in the rest of Iraq, structural field mapping was restricted to asphalt streets, mainly because of the contamination of the area with landmines and unexploded ordnance. In order to extend the structural measurements statistically over the investigated area, we used a newly developed software tool (www.terramath.com) for interactive structural mapping of spatial orientations (i.e. dip direction and dip angles) of the sedimentary beddings from digital elevation models. Structural field data and computed measurements where integrated and projected in NE-SW striking balanced cross-sections perpendicular to the regional trend of the fold axes. We used the software LithoTect (www.geologicsystems.com) for the restoration of the cross-sections. Depending on the interpretation of the shape of the synclines, which are not exposed and covered by Neogene sediments, the shortening is in the order of 10-20%. The restoration confirms that large scale faulting is only of minor importance in the Simply Folded Belt.

Potential field signatures along the Zagros collision zone in Iran

NASA Astrophysics Data System (ADS)

Abedi, Maysam; Fournier, Dominique; Devriese, Sarah G. R.; Oldenburg, Douglas W.

2018-01-01

The Zagros orogenic belt, known as an active fold-thrust belt, was formed in southwestern Iran due to the convergence of the Arabian and Eurasian plates. In this study, potential field data are inverted in 3D to image the variations of magnetic susceptibility and density contrast along the collision zone, resulting in better tectonic understanding of the studied region. Geophysical data measured by airborne magnetic and ground-based gravity systems are used to construct an integrated model that facilitates the interpretations of various tectonic zones across a 450-km line. This line intersects the main structural units from the SW portion of the Zagros belt. The constructed model reveals a contrast that indicates the transition between the two continental plates coinciding with the western boundaries of the Sanandaj-Sirjan Zone (SSZ) at the Main Zagros Thrust (MZT) fault. The subduction of the Arabian continental crust below the Iranian one is evident because of its lower susceptibility property and alternating sequence of high and low density regions. Higher susceptibility, magnetic remanence and density are the mainstays of the Urumieh-Dokhtar Magmatic Assemblage (UDMA) zone at the NE of the studied route, whereas lower values of these properties correspond to (1) the thin massive Tertiary-Neogene and Quaternary sediments of the central domain (CD) zone, and (2) the thick sedimentary and salt intrusion cover over the Zagros Fold-and-Thrust belt (ZFTB). Higher density of regions in the Arabian crust below the ZFTB implies that fault activities have caused significant vertical displacement of the basement. Finally, a simplified geological model is presented based upon the inversions of the geophysical data, in which the main geological units are divided along the studied route.

Chronometric investigations of the Middle to Upper Paleolithic transition in the Zagros Mountains using AMS radiocarbon dating and Bayesian age modelling.

PubMed

Becerra-Valdivia, Lorena; Douka, Katerina; Comeskey, Daniel; Bazgir, Behrouz; Conard, Nicholas J; Marean, Curtis W; Ollé, Andreu; Otte, Marcel; Tumung, Laxmi; Zeidi, Mohsen; Higham, Thomas F G

2017-08-01

The Middle to Upper Paleolithic transition is often linked with a bio-cultural shift involving the dispersal of modern humans outside of Africa, the concomitant replacement of Neanderthals across Eurasia, and the emergence of new technological traditions. The Zagros Mountains region assumes importance in discussions concerning this period as its geographic location is central to all pertinent hominin migration areas, pointing to both east and west. As such, establishing a reliable chronology in the Zagros Mountains is crucial to our understanding of these biological and cultural developments. Political circumstance, coupled with the poor preservation of organic material, has meant that a clear chronological definition of the Middle to Upper Paleolithic transition for the Zagros Mountains region has not yet been achieved. To improve this situation, we have obtained new archaeological samples for AMS radiocarbon dating from three sites: Kobeh Cave, Kaldar Cave, and Ghār-e Boof (Iran). In addition, we have statistically modelled previously published radiocarbon determinations for Yafteh Cave (Iran) and Shanidar Cave (Iraqi Kurdistan), to improve their chronological resolution and enable us to compare the results with the new dataset. Bayesian modelling results suggest that the onset of the Upper Paleolithic in the Zagros Mountains dates to 45,000-40,250 cal BP (68.2% probability). Further chronometric data are required to improve the precision of this age range. Copyright © 2017 Elsevier Ltd. All rights reserved.

Numerical modelling of the role of salt in continental collision: An application to the southeast Zagros fold-and-thrust belt

NASA Astrophysics Data System (ADS)

Ghazian, Reza Khabbaz; Buiter, Susanne J. H.

2014-09-01

The Zagros fold-and-thrust belt formed in the collision of Arabia with Central Iran. Its sedimentary sequence is characterised by the presence of several weak layers that may control the style of folding and thrusting. We use 2-D thermo-mechanical models to investigate the role of salt in the southeast Zagros fold-and-thrust belt. We constrain the crustal and lithospheric thickness, sedimentary stratification, convergence velocity, and thermal structure of the models from available geological and geophysical data. We find that the thick basal layer of Hormuz salt in models on the scale of the upper-mantle decouples the overlying sediments from the basement and localises deformation in the sediments by trench-verging shear bands. In the collision stage of the models, basement dips with + 1° towards the trench. Including the basal Hormuz salt improves the fit of predicted topography to observed topography. We use the kinematic results and thermal structure of this large-scale model as the initial conditions of a series of upper-crustal-scale models. These models aim to investigate the effects of basal and intervening weak layers, salt strength, basal dip, and lateral salt distribution on deformation style of the simply folded Zagros. Our results show that in addition to the Hormuz salt at the base of the sedimentary cover, at least one intervening weak layer is required to initiate fold-dominated deformation in the southeast Zagros. We find that an upper-crustal-scale model, with a basal and three internal weak layers with viscosities between 5 × 1018 and 1019 Pa s, and a basement that dips + 1° towards the trench, best reproduces present-day topography and the regular folding of the sedimentary layers of the simply folded Zagros.

Controls on size and occurrence of the largest sub-aerial landslide on Earth: Seymareh (Saidmarreh) landslide, Zagros fold-thrust belt, Iran

NASA Astrophysics Data System (ADS)

Roberts, N. J.; Evans, S. G.

2009-12-01

Gigantic (> 1 Gm3) landslides are high-magnitude, low-frequency extremes of mass movements. They are important factors in topographic evolution and hazard in mountain regions due to their magnitude. However, few examples exist for study because of their infrequency. Consequently, controls on the location and size gigantic landslides remain poorly understood. Re-examination of the Seymareh (Saidmarreh) rock avalanche, Zagros fold-thrust belt, shows it to be the largest sub-aerial landslide on Earth (initial failure volume 38 Gm3), thus representing the upper magnitude limit for terrestrial landslides. Detailed examination of the source area (including orbital remote sensing, geotechnical investigation and structural mapping) provides new insights into controls on the size and mobility of gigantic landslides. The gigantic Early Holocene rockslide initiated on the northeast limb of Kabir Kuh, the largest anticline in the Zagros fold-thrust belt, and involved the simultaneous failure of a rock mass measuring 15 km along strike. The rockslide transformed into a rock avalanche that ran-out 19.0 km, filling two adjacent valleys and overtopping an intervening low mountain ridge. The failure involved 220 m of competent jointed limestone (Asmari Formation) underlain by 580 m of weaker mudrock-dominated units. Geologic structure, geomechanical strength and topography of the source slope strongly controlled failure initiation. Extreme landslide dimensions resulted in part from extensive uniform pre-failure stability, produced by structural and topographic features related to the large scale of the Kabir Kuh anticline. High continuity bedding planes determined the large lateral extent along strike. Bedding normal joints, the breached nature of the anticline and fluvial undercutting at the slope toe accommodated expansive lateral, headscarp and toe release, respectively, necessary for extensive failure. Geomechanically weak units at depth aided the penetration of the failure surface into the source slope while low bedding dip (ca. 19°) allowed kinematic freedom of a particularly thick sequence to move downslope. Prevention of gradual rockmass removal by smaller-magnitude, more frequent denudation ensured its preservation for later simultaneous failure. The overall failure surface (11°) cut across weaker beds and finally breached the Asmari carapace by break-out at the base of the source slope. Relative relief of the source slope on Kabir Kuh was modest (1350 m on average) indicating that uniform structural and topographic conditions along strike, shallow bedding dips, and the geomechnical properties of the source rock mass were more important in determining the magnitude of the landslide that forms the upper magnitude limit for subaerial landslides.

Linkages between orogenic plateau build-up, fold-thrust shortening, and foreland basin evolution in the Zagros (NW Iran)

NASA Astrophysics Data System (ADS)

Barber, D. E.; Stockli, D. F.

2017-12-01

The Iranian Plateau (IP) is a thickened, low-relief morphotectonic province of diffuse deformation that formed due to Arabia-Eurasia collision and may serve as a younger analogue for the Tibetan Plateau. Despite detailed geophysical characterization of the IP, its deformation history and relationship to the Zagros fold-thrust belt and its foreland basin evolution remains unresolved. Low-temperature thermochronometry and provenance data from a transect across the internal and external Zagros track growth of the IP and delineate multiphase interaction between upper- and lower-plate processes during closure of the Neotethys and Arabia-Eurasia suturing. Inversion of zircon (U-Th)/He and fission-track data from plutonic and metamorphic basement rocks in the Sanandaj-Sirjan Zone (SSZ) of the IP reveals an initial stage of low-rate exhumation from 36-25 Ma, simultaneous with the onset of tectonic subsidence and marine incursion in the Zagros foreland basin. Overlapping apatite fission-track and (U-Th)/He ages indicate sharp acceleration in SSZ exhumation rates between 20-15 Ma, coincident with rejuvenation of foreland basin subsidence and an influx of Eurasian-derived sediments into the Zagros foreland deposited above an Oligocene unconformity. The mid-Miocene marks a transition in focused exhumation from the SSZ to Arabian lower-plate. Apatite (U-Th)/He ages suggest in-sequence fold-thrust propagation from the High Zagros to simply folded belt from 10 Ma to recent, which is reflected in the foreland by a shift in provenance to dominantly recycled Arabian-derived detritus and clastic facies progradation. Integrated thermochronometric and provenance data document a two-phase outward expansion of the Iranian Plateau and Zagros fold-thrust belt, tightly coupled to distinct phases of basin evolution and provenance shifts in the Zagros foreland. We associate multiple deformation and basin episodes with protracted collisional processes, from subduction of attenuated Arabian transitional crust beneath Eurasia causing low-rate upper-plate exhumation in the late Eocene, to accelerated Miocene unroofing and basin flexure linked to increased plate coupling and eventual to suturing as buoyant Arabian continental lithosphere entered the subduction interface.

Seismic Expression of Fault Related Folding in Southeastern Turkey

NASA Astrophysics Data System (ADS)

Beauchamp, W.; McDonald, D.

2009-12-01

Weldon Beauchamp, and David McDonald,TransAtlantic Petroleum Corp. 5910 N. Central Expressway, Suite 1755, Dallas, TX 75206 weldon@tapcor.com, 214-395-7125 The Zagros fold belt extends northwest from Iran and Iraq into southeastern Turkey. Large scale fault related folds control the topography of this region and the path of the Tigris river. Large surface anticlines in the Zagros Mountains provide traps for giant oil and gas fields in Iran and Iraq. Similar scale folds extend into southeast Turkey. These southward verging fault related folds are believed to detach in the Paleozoic. Borehole data, surface geological maps, satellite data and digital topographic models were used to create models to constrain structure at depth. Structural modeling of these folds was used to design, acquire and process seismic reflection data in the region. The seismic reflection data confirmed the presence of asymmetrical, south verging complex fault related folding. Faults related to these folds detach in the Lower Ordovician to Cambrian age shales. These folds are believed to form doubly plunging structures that fold Tertiary through Paleozoic age rocks forming multiple levels of possible hydrocarbon entrapment.

Tracking the India-Arabia Transform Plate Boundary during Paleogene Times.

NASA Astrophysics Data System (ADS)

Rodriguez, M.; Huchon, P.; Chamot-Rooke, N. R. A.; Fournier, M.; Delescluse, M.

2014-12-01

The Zagros and Himalaya mountain belts are the most prominent reliefs built by continental collision. They respectively result from Arabia and India collision with Eurasia. Convergence motions at mountain belts induced most of plate reorganization events in the Indian Ocean during the Cenozoic. Although critical for paleogeographic reconstructions, the way relative motion between Arabia and India was accommodated prior to the formation of the Sheba ridge in the Gulf of Aden remains poorly understood. The India-Arabia plate-boundary belongs to the category of long-lived (~90-Ma) oceanic transform faults, thus providing a good case study to investigate the role of major kinematic events over the structural evolution of a long-lived transform system. A seismic dataset crossing the Owen Fracture Zone, the Owen Basin, and the Oman Margin was acquired to track the past locations of the India-Arabia plate boundary. We highlight the composite age of the Owen Basin basement, made of Paleocene oceanic crust drilled on its eastern part, and composed of pre-Maastrichtian continental crust overlaid by Early Paleocene ophiolites on its western side. A major transform fault system crossing the Owen Basin juxtaposed these two slivers of lithosphere of different ages, and controlled the uplift of marginal ridges along the Oman Margin. This transform system deactivated ~40 Ma ago, coeval with the onset of ultra-slow spreading at the Carlsberg Ridge. The transform boundary then jumped to the edge of the present-day Owen Ridge during the Late Eocene-Oligocene period, before seafloor spreading began at the Sheba Ridge. This migration of the plate boundary involved the transfer of a part of the Indian oceanic lithosphere accreted at the Carlsberg Ridge to the Arabian plate. The episode of plate transfer at the India-Arabia plate boundary during the Late Eocene-Oligocene interval is synchronous with a global plate reorganization event corresponding to geological events at the Zagros and Himalaya belts. The Owen Ridge uplifted later, in Late Miocene times, and is unrelated to any major migration of the India-Arabia boundary.

Earthquake hazard assessment in the Zagros Orogenic Belt of Iran using a fuzzy rule-based model

NASA Astrophysics Data System (ADS)

Farahi Ghasre Aboonasr, Sedigheh; Zamani, Ahmad; Razavipour, Fatemeh; Boostani, Reza

2017-08-01

Producing accurate seismic hazard map and predicting hazardous areas is necessary for risk mitigation strategies. In this paper, a fuzzy logic inference system is utilized to estimate the earthquake potential and seismic zoning of Zagros Orogenic Belt. In addition to the interpretability, fuzzy predictors can capture both nonlinearity and chaotic behavior of data, where the number of data is limited. In this paper, earthquake pattern in the Zagros has been assessed for the intervals of 10 and 50 years using fuzzy rule-based model. The Molchan statistical procedure has been used to show that our forecasting model is reliable. The earthquake hazard maps for this area reveal some remarkable features that cannot be observed on the conventional maps. Regarding our achievements, some areas in the southern (Bandar Abbas), southwestern (Bandar Kangan) and western (Kermanshah) parts of Iran display high earthquake severity even though they are geographically far apart.

An improved evaluation of the seismic/geodetic deformation-rate ratio for the Zagros Fold-and-Thrust collisional belt

NASA Astrophysics Data System (ADS)

Palano, Mimmo; Imprescia, Paola; Agnon, Amotz; Gresta, Stefano

2018-04-01

We present an improved picture of the ongoing crustal deformation field for the Zagros Fold-and-Thrust Belt continental collision zone by using an extensive combination of both novel and published GPS observations. The main results define the significant amount of oblique Arabia-Eurasia convergence currently being absorbed within the Zagros: right-lateral shear along the NW trending Main Recent fault in NW Zagros and accommodated between fold-and-thrust structures and NS right-lateral strike-slip faults on Southern Zagros. In addition, taking into account the 1909-2016 instrumental seismic catalogue, we provide a statistical evaluation of the seismic/geodetic deformation-rate ratio for the area. On Northern Zagros and on the Turkish-Iranian Plateau, a moderate to large fraction (˜49 and >60 per cent, respectively) of the crustal deformation occurs seismically. On the Sanandaj-Sirjan zone, the seismic/geodetic deformation-rate ratio suggests that a small to moderate fraction (<40 per cent) of crustal deformation occurs seismically; locally, the occurrence of large historic earthquakes (M ≥ 6) coupled with the high geodetic deformation, could indicate overdue M ≥ 6 earthquakes. On Southern Zagros, aseismic strain dominates crustal deformation (the ratio ranges in the 15-33 per cent interval). Such aseismic deformation is probably related to the presence of the weak evaporitic Hormuz Formation which allows the occurrence of large aseismic motion on both subhorizontal faults and surfaces of décollement. These results, framed into the seismotectonic framework of the investigated region, confirm that the fold-and-thrust-dominated deformation is driven by buoyancy forces; by contrast, the shear-dominated deformation is primary driven by plate stresses.

Role of the Kazerun fault system in active deformation of the Zagros fold-and-thrust belt (Iran)

NASA Astrophysics Data System (ADS)

Authemayou, Christine; Bellier, Olivier; Chardon, Dominique; Malekzade, Zaman; Abassi, Mohammad

2005-04-01

Field structural and SPOT image analyses document the kinematic framework enhancing transfer of strike-slip partitioned motion from along the backstop to the interior of the Zagros fold-and-thrust belt in a context of plate convergence slight obliquity. Transfer occurs by slip on the north-trending right-lateral Kazerun Fault System (KFS) that connects to the Main Recent Fault, a major northwest-trending dextral fault partitioning oblique convergence at the rear of the belt. The KFS formed by three fault zones ended by bent orogen-parallel thrusts allows slip from along the Main Recent Fault to become distributed by transfer to longitudinal thrusts and folds. To cite this article: C. Authemayou et al., C. R. Geoscience 337 (2005).

Spatial evolution of Zagros collision zone in Kurdistan - NW Iran, constraints for Arabia-Eurasia oblique convergence

NASA Astrophysics Data System (ADS)

Sadeghi, S.; Yassaghi, A.

2015-09-01

Stratigraphy, detailed structural mapping and crustal scale cross section of the NW Zagros collision zone evolved during convergence of the Arabian and Eurasian plates were conducted to constrain the spatial evolution of the belt oblique convergence since Late Cretaceous. Zagros orogeny in NW Iran consists of the Sanandaj-Sirjan, Gaveh Rud and ophiolite zones as internal, and Bisotoun, Radiolarite and High Zagros zones as external parts. The Main Zagros Thrust is known as major structures of the Zagros suture zone. Two stages of deformation are recognized in the external parts of Zagros. In the early stage, presence of dextrally deformed domains beside the reversely deformed domains in the Radiolarite zone as well as dextral-reverse faults in both Bisotoun and Radiolarite zones demonstrates partitioning of the dextral transpression. In the late stage, southeastward propagation of the Zagros orogeny towards its foreland resulted in synchronous development of orogen-parallel strike-slip and pure thrust faults. It is proposed that the first stage related to the late Cretaceous oblique obduction, and the second stage is resulted from Cenozoic collision. Cenozoic orogen-parallel strike-slip component of Zagros oblique faulting is not confined to the Zagros suture zone (Main Recent) but also occurred in the more external part (Marekhil-Ravansar fault system). Thus, it is proposed that oblique convergence of Arabia-Eurasia plates occurred in Zagros collision zone since the Late Cretaceous.

3-D lithospheric structure and regional/residual Bouguer anomalies in the Arabia-Eurasia collision (Iran)

NASA Astrophysics Data System (ADS)

Jiménez-Munt, I.; Fernãndez, M.; Saura, E.; Vergés, J.; Garcia-Castellanos, D.

2012-09-01

The aim of this work is to propose a first-order estimate of the crustal and lithospheric mantle geometry of the Arabia-Eurasia collision zone and to separate the measured Bouguer anomaly into its regional and local components. The crustal and lithospheric mantle structure is calculated from the geoid height and elevation data combined with thermal analysis. Our results show that Moho depth varies from ˜42 km at the Mesopotamian-Persian Gulf foreland basin to ˜60 km below the High Zagros. The lithosphere is thicker beneath the foreland basin (˜200 km) and thinner underneath the High Zagros and Central Iran (˜140 km). Most of this lithospheric mantle thinning is accommodated under the Zagros mountain belt coinciding with the suture between two different mantle domains on the Sanandaj-Sirjan Zone. The regional gravity field is obtained by calculating the gravimetric response of the 3-D crustal and lithospheric mantle structure obtained by combining elevation and geoid data. The calculated regional Bouguer anomaly differs noticeably from those obtained by filtering or just isostatic methods. The residual gravity anomaly, obtained by subtraction of the regional components to the measured field, is analyzed in terms of the dominating upper crustal structures. Deep basins and areas with salt deposits are characterized by negative values (˜-20 mGal), whereas the positive values are related to igneous and ophiolite complexes and shallow basement depths (˜20 mGal).

The continuation of the Kazerun fault system across the Sanandaj-Sirjan zone (Iran)

NASA Astrophysics Data System (ADS)

Safaei, Homayon

2009-08-01

The Kazerun (or Kazerun-Qatar) fault system is a north-trending dextral strike-slip fault zone in the Zagros mountain belt of Iran. It probably originated as a structure in the Panafrican basement. This fault system played an important role in the sedimentation and deformation of the Phanerozoic cover sequence and is still seismically active. No previous studies have reported the continuation of this important and ancient fault system northward across the Sanandaj-Sirjan zone. The Isfahan fault system is a north-trending dextral strike-slip fault across the Sanandaj-Sirjan zone that passes west of Isfahan city and is here recognized for the first time. This important fault system is about 220 km long and is seismically active in the basement as well as the sedimentary cover sequence. This fault system terminates to the south near the Main Zagros Thrust and to the north at the southern boundary of the Urumieh-Dokhtar zone. The Isfahan fault system is the boundary between the northern and southern parts of Sanandaj-Sirjan zone, which have fundamentally different stratigraphy, petrology, geomorphology, and geodynamic histories. Similarities in the orientations, kinematics, and geologic histories of the Isfahan and Kazerun faults and the way they affect the magnetic basement suggest that they are related. In fact, the Isfahan fault is a continuation of the Kazerun fault across the Sanandaj-Sirjan zone that has been offset by about 50 km of dextral strike-slip displacement along the Main Zagros Thrust.

Active accommodation of plate convergence in Southern Iran: Earthquake locations, triggered aseismic slip, and regional strain rates

NASA Astrophysics Data System (ADS)

Barnhart, William D.; Lohman, Rowena B.; Mellors, Robert J.

2013-10-01

We present a catalog of interferometric synthetic aperture radar (InSAR) constraints on deformation that occurred during earthquake sequences in southern Iran between 1992 and 2011, and explore the implications on the accommodation of large-scale continental convergence between Saudi Arabia and Eurasia within the Zagros Mountains. The Zagros Mountains, a salt-laden fold-and-thrust belt involving ~10 km of sedimentary rocks overlying Precambrian basement rocks, have formed as a result of ongoing continental collision since 10-20 Ma that is currently occurring at a rate of ~3 cm/yr. We first demonstrate that there is a biased misfit in earthquake locations in global catalogs that likely results from neglect of 3-D velocity structure. Previous work involving two M ~ 6 earthquakes with well-recorded aftershocks has shown that the deformation observed with InSAR may represent triggered slip on faults much shallower than the primary earthquake, which likely occurred within the basement rocks (>10 km depth). We explore the hypothesis that most of the deformation observed with InSAR spanning earthquake sequences is also due to shallow, triggered slip above a deeper earthquake, effectively doubling the moment release for each event. We quantify the effects that this extra moment release would have on the discrepancy between seismically and geodetically constrained moment rates in the region, finding that even with the extra triggered fault slip, significant aseismic deformation during the interseismic period is necessary to fully explain the convergence between Eurasia and Saudi Arabia.

Cenozoic intracontinental deformation of the Kopeh Dagh Belt, Northeastern Iran

NASA Astrophysics Data System (ADS)

Chu, Yang; Wan, Bo; Chen, Ling; Talebian, Morteza

2016-04-01

Compressional intracontinental orogens represent large tectonic zones far from plate boundaries. Since intracontinental mountain belts cannot be framed in the conventional plate tectonics theory, several hypotheses have been proposed to account for the formations of these mountain belts. The far-field effect of collision/subduction at plate margins is now well accepted for the origin and evolution of the intracontinental crust thickening, as exemplified by the Miocene tectonics of central Asia. In northern Iran, the Binalud-Alborz mountain belt witnessed the Triassic tectonothermal events (Cimmerian orogeny), which are interpreted as the result of the Paleotethys Ocean closure between the Eurasia and Central Iran blocks. The Kopeh Dagh Belt, located to the north of the Binalud-Alborz Belt, has experienced two significant tectonic phases: (1) Jurassic to Eocene rifting with more than 7 km of sediments; and (2) Late Eocene-Early Oligocene to Quaternary continuous compression. Due to the high seismicity, deformation associated with earthquakes has received more and more attention; however, the deformation pattern and architecture of this range remain poorly understood. Detailed field observations on the Cenozoic deformation indicate that the Kopeh Dagh Belt can be divided into a western zone and an eastern zone, separated by a series of dextral strike-slip faults, i.e. the Bakharden-Quchan Fault System. The eastern zone characterized by km-scale box-fold structures, associated with southwest-dipping reverse faults and top-to-the NE kinematics. In contrast, the western zone shows top-to-the SW kinematics, and the deformation intensifies from NE to SW. In the northern part of this zone, large-scale asymmetrical anticlines exhibit SW-directed vergence with subordinate thrusts and folds, whereas symmetrical anticlines are observed in the southern part. In regard to its tectonic feature, the Kopeh Dagh Belt is a typical Cenozoic intracontinental belt without ophiolites or arc magmatism. During the Jurassic to Eocene rifting, this belt acted as the southern boundary of the Amu Darya Basin with normal faulting, which is also widespread in the South Caspian Sea and the Black Sea. Moreover, such an extended area became a relatively weak zone within the Eurasian Plate, and could be easily reworked. Because of the collision in the Zagros Belt, the intracontinental compression commenced as early as Late Eocene to Early Oligocene, which is interpreted as tectonic inversion along this weak zone. The western zone of the Kopeh Dagh Belt was also affected by southerly indentation/extrusion of the South Caspian block since middle Miocene, possibly resulting in the different deformation patterns between the western and eastern zones.

Seismic behaviour of mountain belts controlled by plate convergence rate

NASA Astrophysics Data System (ADS)

Dal Zilio, Luca; van Dinther, Ylona; Gerya, Taras V.; Pranger, Casper C.

2018-01-01

The relative contribution of tectonic and kinematic processes to seismic behaviour of mountain belts is still controversial. To understand the partitioning between these processes we developed a model that simulates both tectonic and seismic processes in a continental collision setting. These 2D seismo-thermo-mechanical (STM) models obtain a Gutenberg-Richter frequency-magnitude distribution due to spontaneous events occurring throughout the orogen. Our simulations suggest that both the corresponding slope (b value) and maximum earthquake magnitude (MWmax) correlate linearly with plate convergence rate. By analyzing 1D rheological profiles and isotherm depths we demonstrate that plate convergence rate controls the brittle strength through a rheological feedback with temperature and strain rate. Faster convergence leads to cooler temperatures and also results in more larger seismogenic domains, thereby increasing both MWmax and the relative number of large earthquakes (decreasing b value). This mechanism also predicts a more seismogenic lower crust, which is confirmed by a transition from uni- to bi-modal hypocentre depth distributions in our models. This transition and a linear relation between convergence rate and b value and MWmax is supported by our comparison of earthquakes recorded across the Alps, Apennines, Zagros and Himalaya. These results imply that deformation in the Alps occurs in a more ductile manner compared to the Himalayas, thereby reducing its seismic hazard. Furthermore, a second set of experiments with higher temperature and different orogenic architecture shows the same linear relation with convergence rate, suggesting that large-scale tectonic structure plays a subordinate role. We thus propose that plate convergence rate, which also controls the average differential stress of the orogen and its linear relation to the b value, is the first-order parameter controlling seismic hazard of mountain belts.

Stress states in the Zagros fold-and-thrust belt from passive margin to collisional tectonic setting

NASA Astrophysics Data System (ADS)

Navabpour, Payman; Barrier, Eric

2012-12-01

The present-day Zagros fold-and-thrust belt of SW-Iran corresponds to the former Arabian passive continental margin of the southern Neo-Tethyan basin since the Permian-Triassic rifting, undergoing later collisional deformation in mid-late Cenozoic times. In this paper an overview of brittle tectonics and palaeostress reconstructions of the Zagros fold-and-thrust belt is presented, based on direct stress tensor inversion of fault slip data. The results indicate that, during the Neo-Tethyan oceanic opening, an extensional tectonic regime affectedthe sedimentary cover in Triassic-Jurassic times with an approximately N-S trend of the σ3 axis, oblique to the margin, which was followed by some local changes to a NE-SW trend during Jurassic-Cretaceous times. The stress state significantly changed to thrust setting, with a NE-SW trend of the σ1 axis, and a compressional tectonic regime prevailed during the continental collision and folding of the sedimentary cover in Oligocene-Miocene times. This compression was then followed by a strike-slip stress state with an approximately N-S trend of the σ1 axis, oblique to the belt, during inversion of the inherited extensional basement structures in Pliocene-Recent times. The brittle tectonic reconstructions, therefore, highlighted major changes of the stress state in conjunction with transitions between thin- and thick-skinned structures during different extensional and compressional stages of continental deformation within the oblique divergent and convergent settings, respectively.

The occurrence and origin of celestite in the Abolfares region, Iran: Implications for Sr-mineralization in Zagros fold belt (ZFB)

NASA Astrophysics Data System (ADS)

Pourkaseb, Houshang; Zarasvandi, Alireza; Rezaei, Mohsen; Mahdavi, Reyhaneh; Ghanavati, Fatemeh

2017-10-01

The major celestite deposits in Zagros Fold belt are associated with coastal marine carbonate and evaporate sediments of Oligo-Miocene Asmari and Lower Miocene Ghachsaran Formations. In the Abolfares region, celestite mineralization is extended in the western limb of Bangestan anticline in the carbonates of Early Miocene (middle part of Asmari Formation), underlying by dolomitic carbonates of Burdigalian. From bottom to top three main types of mineralization can be distinguished in the study area: (1) layer texture resulting from replacement of algal limestone by celestite minerals with some parts showing idiomorphic crystals (geodes) along the walls of the cavities, (2) celestite occurrence as irregular massive shape interconnected small crystals and nodules, and (3) celestite mineralization associated with steeply dipping veins and open space fracture fillings, resulting from late-stage epigenetic processes. Highlightly, the ore-hosting carbonate rocks were deposited in an intertidal - supratidal protected setting with hypersaline conditions, in accordance with other celestite deposits of the Zagros Fold belt. The abundance of diagenetic crystallization rhythmites, carbonate and anhydrite inclusions as confirmed by Laser Raman spectroscopy analysis, high Sr/Ba values (average; 8726.1) and strong negative correlations between SO3 vs CaO (R2 = 0.98), SrO vs CaO (R2 = 0.96) with positive correlations between Ba vs SrO (R2 = 0.54) and SO3 vs SrO (R2 = 0.98) highlight the role of high Sr late-diagenetic brines in replacement of carbonates with celestite minerals. It seems that the inception of compressional folding during or soon after the deposition of the Asmari Formation in the carbonate platform at the margin of NW-trending basin in the foreland of the Zagros orogenic belt lead to the upward refluxing of penetrated high-Sr diagenetic brines and celestite mineralization.

Tectonic geomorphology of the Safeen Anticline (Northern Iraq)

NASA Astrophysics Data System (ADS)

Bartl, N.; Grasemann, B.; Faber, R.; Lockhart, D.

2009-04-01

The Zagros Fold- and Thrust Belt extends over 1800 km from Kurdistan in N-Iraq to the Strait of Hormuz in Iran and is one of the world most promising regions for the future hydrocarbon exploration. The Zagros Mountains are the result of the collision of the Eurasian and the Arabian Plates starting in the Late Cretaceous. Recent GPS measurements in have shown that the shortening between these two plates is about 2.5 cm/a most of which is distributed within the Zagros collision orogen. Whereas the tectonic structure and the geomorphological response to active deformation is thoroughly studied in the SE part of the Zagros in Iran, there are almost no modern field based studies of the NW part of the Zagros in Iraq. Here we present the first structural field studies, the mechanical stratigraphy and geomorphological investigations of the Safeen anticline in the NE of the city of Erbil in the Kurdistan region, which is a province of Northern Iraq. The sub-cylindrical part of the anticline strikes for about 65 km NW-SE and has a dominant wavelength of about 6 km. Perpendicular to the strike of the anticline Cretaceous to Tertiary sediments are exposed consisting mainly of bedded to massif limestones and sandstones (competent lithologies), intercalated with marl and claystones (incompetent lithologies). Whereas deformation in the competent lithologies is accommodated by diffusive mass transfer processes and mainly fracturing, the incompetent lithologies record distributed plastic deformation. Along the investigated section, the limbs of the anticline dip with 55° towards NE (backlimb) and 60° towards SW (forelimb). Interestingly the drainage pattern of the forelimb differs significantly to the erosional signature along the backlimb. Both limbs are dominated by transverse river segments. The backlimb records straight almost perpendicular to the fold axis with a spacing of the segments of about 200 m. The forelimb, however, is dominated by a more irregular pattern with a wider spacing of the main segments of about 600m. We use an ASTER digital elevation model in combination with the geological map in order to quantify the differences in geomorphological signal along the different limbs of the Safeen anticline.

Tertiary stress field evolution in Sistan (Eastern Iran)

NASA Astrophysics Data System (ADS)

Michael, Jentzer; Marc, Fournier; Philippe, Agard; Jafar, Omrani

2016-04-01

The Sistan orogenic belt in eastern Iran, near the boundary with Afghanistan, results from the closure of a branch of the Neo-Thethys: the Sistan Ocean. It was divided by Tirrul et al. (1983) in five main units: the Lut (1) and Afghan (2) continental blocks where basement is exposed; the Neh (3) and Ratuk (4) complexes which display ophiolitic rocks weakly and highly (HP-BT) metamorphosed, respectively, and the Sefidabeh basin lying over these complexes and interpreted as a fore-arc basin. Sistan is bordered by the Makran and Zagros (formed by the closure of the Neo-Tethys) to the south and by the Kopet Dagh (formed by the closure of Paleo-Tethys) to the North. The aim of this study is to fill the gap between preliminary studies about the overall structure of the Sistan Suture Zone and recent investigations of active tectonics in the region (e.g., Walker et al., 2004 and 2006 a and b). Questions herein addressed are: (1) how are stresses transfered throughout Iran from the Zagros to the Sistan belts? (2) Did the Zagros, Makran and Sistan belts evolve independently through time, or were they mechanically coupled? In order to answer these questions, we have determined paleostress evolution in the Sistan, using a direct inversion method for 42 microtectonic sites in almost all lithologies of the Neh complex and the Sefidabeh basin. We find three successive directions of compression: (1) 87°N for the oldest deformation stage dated of the Late Miocene, (2) 59°N for the intermediate stage probably dated of the Early Pliocene, and (3) 26°N for the youngest stage dated of the Plio-Quaternary. A counterclockwise rotation of about 60° of the main stress (σ1) in less than 10 Ma is therefore documented in Sistan. These same three stages of deformation were also documented by several microtectonic studies in Iran, especially in Makran and Zagros. The direction of the youngest compression is very homogeneous indicating that the mountain belts and continental blocks of Iran are presently mechanically coupled and shortened in the Arabia Eurasia collision zone. The counterclockwise rotation of compression, from Miocene to Present, documented everywhere in Iran is probably related to the rotation of the Arabia-Eurasia direction of convergence. However, the amount of rotation is higher in Central Iran than in South Iran, suggesting a progressive mechanical coupling from Miocene to Present. Tirrul, R., Bell, I.R., Griffis, R.J., Camp, V.E., 1983. The Sistan suture zone of eastern Iran. Geol. Soc. America Bull., 94, 134-150. Walker, R., Jackson, J., 2004. Active tectonics and late Cenozoic strain distribution in central and eastern Iran. Tectonics 23, doi:10.1029/2003TC001529 Walker, R.T., 2006 a. A remote sensing study of active folding and faulting in southern Kerman province, S.E. Iran. J. Struct. Geol. 28, 654-668. doi:10.1016/j.jsg.2005.12.014 Walker, R.T., Khatib, M.M., 2006 b. Active faulting in the Birjand region of NE Iran. Tectonics 25, doi:10.1029/2005TC001871

Petroleum generation and migration in the Mesopotamian Basin and Zagros fold belt of Iraq: Results from a basin-modeling study

USGS Publications Warehouse

Pitman, Janet K.; Steinshouer, D.; Lewan, M.D.

2004-01-01

A regional 3-D total petroleum-system model was developed to evaluate petroleum generation and migration histories in the Mesopotamian Basin and Zagros fold belt in Iraq. The modeling was undertaken in conjunction with Middle East petroleum assessment studies conducted by the USGS. Regional structure maps, isopach and facies maps, and thermal maturity data were used as input to the model. The oil-generation potential of Jurassic source-rocks, the principal known source of the petroleum in Jurassic, Cretaceous, and Tertiary reservoirs in these regions, was modeled using hydrous pyrolysis (Type II-S) kerogen kinetics. Results showed that oil generation in source rocks commenced in the Late Cretaceous in intrashelf basins, peak expulsion took place in the late Miocene and Pliocene when these depocenters had expanded along the Zagros foredeep trend, and generation ended in the Holocene when deposition in the foredeep ceased. The model indicates that, at present, the majority of Jurassic source rocks in Iraq have reached or exceeded peak oil generation and most rocks have completed oil generation and expulsion. Flow-path simulations demonstrate that virtually all oil and gas fields in the Mesopotamian Basin and Zagros fold belt overlie mature Jurassic source rocks (vertical migration dominated) and are situated on, or close to, modeled migration pathways. Fields closest to modeled pathways associated with source rocks in local intrashelf basins were charged earliest from Late Cretaceous through the middle Miocene, and other fields filled later when compression-related traps were being formed. Model results confirm petroleum migration along major, northwest-trending folds and faults, and oil migration loss at the surface.

Sinkholes, collapse structures and large landslides in an active salt dome submerged by a reservoir: The unique case of the Ambal ridge in the Karun River, Zagros Mountains, Iran

NASA Astrophysics Data System (ADS)

Gutiérrez, Francisco; Lizaga, Iván

2016-02-01

Ambal ridge, covering 4 km2, is a salt pillow of Gachsaran Formation with significant salt exposures in direct contact with the Karun River, Zagros Mountains. The highly cavernous salt dome is currently being flooded by the Gotvand Reservoir, second largest in Iran. Geomorphic evidence, including the sharp deflection of the Karun River and defeated streams indicate that Ambal is an active halokinetic structure, probably driven by erosional unloading. Around 30% of the salt dome is affected by large landslides up to ca. 50 × 106 m3 in volume. Slope oversteepening related to fluvial erosion and halokinetic rise seems to be the main controlling factor. A total of 693 sinkholes have been inventoried (170 sinkholes/km2), for which a scaling relationship has been produced. The depressions occur preferentially along a belt with a high degree of clustering. This spatial distribution is controlled by the proximity to the river, slope gradient and halite content in the bedrock. A large compound depression whose bottom lies below the normal maximum level of the reservoir will likely be flooded by water table rise forming a lake. The impoundment of the reservoir has induced peculiar collapse structures 220-280 m across, expressed by systems of arcuate fissures and scarps. Rapid subsurface salt dissolution is expected to generate and reactivate a large number of sinkholes and may reactivate landslides with a significant vertical component due to lack of basal support.

Preliminary investigation of Zagros thrust-fold-belt deformation using SAR interferometry

NASA Technical Reports Server (NTRS)

Nilforoushan, Faramarz; Talbot, Christopher J.; Fielding, Eric J.

2005-01-01

Most of the Zagros deformation resulting from the convergence of Arabia and Eurasia takes place in the Southeast Zagros. To apply the SAR interferometry geodetic technique, a few ERS 1 & 2 satellite images were used to map this continuing deformation proven by GPS. Interferograms over 7 years show surprisingly high coherence. The unwrapped phases display a high correlation with topography reflecting atmospheric noise in addition to the desired tectonic signal. We estimate two simple linear trends and remove them from interferograms. The preliminary results show local uplift rates with a likely minimum of 1-2 mm/yr. These early crude results will be tested by more data in project No. 3174.

Paleo- and Neo-Tethyan ophiolites of Iran: a progress report

NASA Astrophysics Data System (ADS)

Ghazi, M.; Hassanipak, A.; Babaie, H.

2003-04-01

The Bitlis-Zagros and Alborz stuture zones of Iran mark two collisional plate boundaries in the Alpine-Himalayan orogenic belt. The ophiolites of these zones together with the ophiolites of Makran accretionary prism and Central Iran form discontinuous linear belts of Tethyan oceanic fragments, which form a bridge between the Mediterranean and Himalayan ophiolites. Based on age alone these ophiolites have been divided into less abundant Paleozoic and much more abundant Mesozoic ophiolites. The Paleozoic ophiolites are located along the Alborz orogenic belt [i.e., Rasht and Mashhad ophiolites (297 Ma and 268 Ma)] and near Anarak in Central Iran. which are the remnants of the Paleo-Tethys ocean crust emplaced as result of closure of the Paleo-Tethys between the Turan and the Central Iranian Microplates (CIM). The Mesezoic ophiolites of Iran are more abundant and include the Zagros ophiolites (i.e., Neyriz and the Kermanshah ophiolites which appear to be coeval with the Oman ophiolite obducted onto the Arabian plate (˜96-92 Ma). The Khoy ophiolite in NW Iran which has formation age of Middle to Late Jurrasic (˜159-155 Ma), and emplacement age Albian ages (˜ 109-104 Ma) has a different tectonics than other Zagros ophiolites. Unfragmented ophiolites of the Makran accretionary prism which are located to the south of the Sanandaj-Sirjan microcontinental block, including complexes such as Band-e-Zeyarat/Dar Anar, Ganj and Remeshk/Mokhtarabad (˜140-98 Ma) are similar in age to the Masirah ophiolite (i.e., ˜150-120 Ma). The ophiolites of the Central Iran include those inside of the Sanandaj-Sirjan microcontinental block, such as Shahr-e-Babak (120 Ma), Naien (100 Ma), Baft, Sabzevar in north central Iran (98-70 Ma) and Tchehel Kureh on the eastern boundary of CIM.Geochemically, these ophiolites are quite diverse and show a significant variations in rock composition, representing a wide range of tectonic environment of formation. In terms of radiogenic isotopic data, basalt and gabbros from Neyriz (Zagros), Khoy (NW Zagros ?), and Band-e-Zeyarat (Makran) have Indian Ocean MORB signature.

iss012e18779

NASA Image and Video Library

2006-02-28

ISS012-E-18779 (28 Feb. 2006) --- Winter in the Dasht-e-Lut Desert, eastern Iran is featured in this image photographed by an Expedition 12 crew member on the International Space Station. The image takes advantage of the low angle of illumination to reveal linear geological structures of the Iranian mountain range bordering the western edge of the basin known as Dasht-e-Lut. The range rises 1818 meters (6000 feet) above sea level and lies 750 kilometers (466 miles) north of the Persian Gulf. The convoluted appearance results from erosion of folded and faulted rocks – softer rocks erode away quickly, leaving more resistant rock to form linear ridges perpendicular to the direction of compression. While not a major oil producing region like the Zagros Fold Belt to the southwest, the mountains of east-central Iran contain economically important deposits of copper and other metals. Little vegetation is visible from space in the arid interior basin of the Dasht-e-Lut. Iran is climatically part of the Afro-Asian belt of deserts that stretch from the Cape Verde islands off West Africa all the way to Mongolia near Beijing. The patchy, elongated, light-colored feature in the foreground (parallel to the mountain range) is the northernmost of the Dasht dry lakes that stretch southward 300 kilometers (186 miles). High country is the source of precipitation-derived water in all near-tropical deserts. Agricultural fields (small dark patches in the image) that depend on this precipitation are located down slope near the margin of the dry, salty soils of the lake.

Early Neogene foreland of the Zagros, implications for the initial closure of the Neo-Tethys and kinematics of crustal shortening

NASA Astrophysics Data System (ADS)

Pirouz, Mortaza; Avouac, Jean-Philippe; Hassanzadeh, Jamshid; Kirschvink, Joseph L.; Bahroudi, Abbas

2017-11-01

We study the transition from passive margin to foreland basin sedimentation now exposed in the High Zagros belt to provide chronological constraints on the initial stage of Arabia-Eurasia collision and closure of the Neo-Tethys. We performed magnetostratigraphy and strontium isotope stratigraphy along two sections near the Zagros suture which expose the oldest preserved foreland deposits: the Shalamzar section in the west and the Dehmoord section in the east. The top of the passive margin Asmari formation has an age of 28-29 Ma in the High Zagros and is overlain by foreland deposits with a major basal unconformity representing 7 Myr of hiatus. The base of the foreland deposits has an age of 21.5 Ma at Dehmoord and ca. 26 Ma at Shalamzar. The sedimentation rate increased from 30 m/Myr in the passive margin to 247 m/Myr in the foreland. Combined with available age constraints across the Zagros, our results show that the unconformity is diachronous and records the southwestward migration of the flexural bulge within the Arabian plate at an average rate of 24 ± 2 mm/yr over the last 27 Ma. The time evolution of sediment accumulation in the Zagros foreland follows the prediction from a flexural model, as the foreland is thrust beneath the orogenic wedge and loaded by the wedge and basin fill. We detect the onset of forebulge formation within the Asmari Formation around 25 Ma. We conclude that closure of the Neo-Tethys formed the Zagros collisional wedge at 27 ± 2 Ma. Hence, the Arabia-Eurasia collision was probably not the main driver of global cooling which started near the Eocene-Oligocene boundary (ca. 33.7 Ma). We estimate 650 km of forebulge migration since the onset of the collision which consists of 350 km of shortening across the orogen, and 300 km of widening of the wedge and increasing flexural rigidity of Arabia. We conclude the average rate of shortening across the Zagros to be ca. 13 mm/yr over the last 27 Myr; a value comparable to the modern rate. Palinspastic restoration of structural cross-sections and crustal volume conservation comprise only ca. 200 km of shortening across the Zagros and metamorphic Sanandaj-Sirjan belt implying that at least 150 km of the Arabian crust was underthrust beneath Eurasia without contributing to crustal thickening, possibly due to eclogitization.

Satellite Gravity Transforms Unmask Tectonic Pattern of Arabian-African Region

NASA Astrophysics Data System (ADS)

Eppelbaum, Lev; Katz, Youri

2017-04-01

Satellite derived geophysical gravity data are the modern powerful tool of regional tectono-geophysical examination of the Earth's crust and upper mantle. It is well known that regional long-term seismological prognosis, strategy of searching economic deposits and many other important geological-geophysical problems are based mainly on constructions derived from the combined tectono-geophysical zonation. Some authors' experience of the tectono-geophysical zonation in the Eastern Mediterranean (both sea and land) with satellite derived gravity field (Eppelbaum and Katz, 2015a, 2015b) indicates a high effectiveness of the data employment for delineation of different tectono-structural units. Therefore, on the basis of the previous successive application, satellite derived gravity field analysis was applied for a giant (covering > 10 mln. km2) and complex Arabian-African region (including Zagros Mts.). The gravity field retracked from the Geosat and ERS-1 altimetry (e.g., Sandwell and Smith, 2009) was processed by the use of different mathematical apparatus employment enabling to underline these or those tectonic (geodynamic) features of the region under study. The main goals of present investigation are following: (1) employment of a new powerful regional geophysical tool - satellite derived gravity data and its transforms for unmasking some buried tectonic and geodynamic peculiarities of the study area, (2) finding definite relationships between the novel tectonic map and the gravity field transformations, (3) development of a novel tectonic map of this area (on the basis of careful examination of and generalization of available geological and geophysical (mostly satellite gravity) data). The compiled gravity map (for the map compiling more than 4 mln. observations were utilized) with the main tectonic features shows the intricate gravity pattern of the investigated area. An initial analysis of the gravity field behavior enabled to separate two main types of tectonic structures: (1) stable zones of continental and oceanic crust, and (2) mobile geotectonic belts. First type is characterized by homogeneous character of gravity field pattern (for instance, East Arabian Craton), whereas second type is characterized by mosaic and variable behavior of gravity field (especially, active rift zones). It should be noted that 'youngest' mobile structure (Alpine-Himalayan orogenic belt and active rift systems of the Red Sea - East Africa) significantly differs in the gravity field pattern from the Mesozoic terrane belt and Neoproterozoic belt. In this investigation six satellite gravity transforms (SGT) are described: multidimensional statistical analysis (MSA) by the use of sliding window, low-pass filtering, informational approach, gradient operator, entropy processing by sliding window of adaptive form, and 3D inverse methods. Application of the MSA enabled not only to delineate geodynamical parameters of the studied region (collision zone at the boundary between the Arabian and Eurasian Plates, and active rift zones between the Arabian, Nubian and Somalian Plates, etc.), but also to estimate generalized properties of the Earth's crust. Results of MSA employment clearly show zone of development of the oceanic crust of the Easternmost Mediterranean and zone of oceanic crust of the Gulf of Aden and eastern (oceanic) part of the Somalian Plate. Besides this, in this map the Arabian and East African active rift zones and collision zone between the Arabian and Eurasian Plates are visibly traced. Applied low-pass gravity field filtering enabled to recognize the most contrast crust-mantle structures. For example, the Afar triangle zone is clearly detected. Zones of the Neotethys closing Eastern Mediterranean, Persian Gulf, Zagros Fault Zone and South Caspian Basin can be easily identified. Subduction zones associated with the plate boundaries are reflected by elongated gradient pattern. These nonstable zones are conjugated with large mobile belts: Alpine-Himalayan belt and Mesozoic terrane belt. The zone of active rifting of the Red Sea, Gulf of Aden and complex structure of Afar triangle as well as East African rift system are noticeably fixed. The boundary between the continental and crust in the SE part of the region (where occurs a transfer zone between the Gulf of Aden and Arabian Sea) is visibly detected. Application of informational approach (Eppelbaum and Khesin, 2012) enabled to reliably fix both continental and oceanic cratons and all belts. To south-east of the Horn of Africa the Arabian Sea Basin with oceanic crust is clearly distinguished. The East Arabian Craton (platform) as well as its framing are noticeably detected. Computation of entropy map from the satellite derived gravity field was earlier successfully tested by the authors in the Eastern Mediterranean (Eppelbaum and Katz, 2015a). Application of the adaptive form sliding window enables to receive the most reliable entropy estimations in conditions of complex field caused by superimposed influence of targets of different order. Obviously, computation of an entropial map by the same method for the region under study reproduces mainly deep tectonic units (elements) of the region. Complex pattern of entropial field in the SE part of the region reflects transfer from the Somalian Plate to Indian Plate (this area is characterized by the most mosaic pattern). This map nicely indicates position of the Mesozoic terrane belt and transition zone between the Victorian and Tanzanian plates. On the basis of advanced inverse method employment, the map indicating the most density contrast surface (discontinuity) in the upper mantle was developed. This map presents an intricate density-tectonic depth pattern of the region. Here such important tectonic features as the Afar Triple Junction and collision zone between the Arabian and Eurasian lithospheric plates are noticeably recognized. Besides this, we can note increasing of lithospheric thickness in central parts of the Arabian and Somalian plates. Both these plates are countered by low-thickness lithospheric zones corresponding to the active rift zones. As it is indicated in the map, the thick lithospheric zones are associated with collisional zones at boundaries between the cratons and mobile belts. We suggest that the lowered values in the northern boundaries of the Arabian Plate correspond to subduction zones. The zones of lowered values in the middle of western part of the region correspond to the Neoproterozoic belt where ophiolitic and back-arc complexes with a thinned crust (e.g., Stern et al., 2004) are developed. Compiled satellite derived gravity field and a set of SGT were utilized for development of a novel tectono-geophysical zonation map of the Arabian-African region. Structurally- geodynamically this region is one of the key Earth's megastructures where are closely disposed remain elements of the Tethys Ocean crust (Ben-Avraham et al., 2002; Robertson, 2004), most ancient Early Permian reversly magnetized Kiama zone (Eppelbaum and Katz, 2012b; Eppelbaum et al., 2014), and the youngest modern oceanic crust of the Afar triangle developed among the continental lumps (Yirgu et al., 2006; Bastow et al., 2011). The tectonic zonation was carried out with application of three main principles of tectonic analysis: (1) classic basis of space-temporary reflection of structural complexes, (2) modern structural-geodynamic approach derived from the plate tectonic reconstructions where essential role plays analysis of rift, tectonic transform and collision forms of Earth's development, (3) revealing of intricate correlation between the mapped tectono-structural elements and lithospheric-mantle complexes delineated by using both conventional geophysical methods (seismic, seismological, thermal data, etc.) and comprehensive analysis of satellite derived gravity data. Compiled tectonic map of the region (00 - 35.60 north, and 300 - 570 east) indicates that Precambrian basement and Mesozoic-Cenozoic structures play dominating structural- geodynamic role in this region. Precambrian generations include two main structural elements: (1) Archean platforms (Eastern Arabian, Tanzanian and Eastern Saharan cratons), and (2) Neoproterozoic belt. In the Neoproterozoic belt we distinguish: (a) final Proterozoic back-arc belts with ophiolites, and (b) more ancient Early/Middle Proterozoic massifs (detected both in some previous works of various authors and recognized by the authors of the present investigation using a set of geological-geophysical indicators). In the areas of development of sedimentary Phanerozoic cover in the northern part of Arabian and African (Nubian) Plates, boundaries of Early/Middle Proterozoic massifs (Tabuk, Haif-Rutfah, Widyan and Nile Cone) and Neoproterozoic belts (Azraq-Sirhan, Ga'ara and Northern Western Desert) were delineated by analysis of: (1) land and airborne geophysical data, and (2) satellite derived gravity data. Meso-Cenozoic structures of the region contain two tectonic complexes of its forming. 1st complex (from Permian to present) is associated with the Neotethys Ocean evolution. 2nd complex (from Oligocene to present) is associated with initial phases of spreading in the Arabian-African segment of Earth's crust. 1st complex structurally and geodynamically is a multiple generation since the Neotethys Ocean evolution was accompanied by processes of spreading, movements of some giant blocks along tectonic transforms, and collisions. These processes have formed structures of three types: (1) Mesozoic terrane belt, (2) Cenozoic orogenic belt, and (3) remain depressions of the Neotethys with oceanic crust. Western (Levantine) part of the Mesozoic terrane belt is characterized by more ancient (Hauterive) age of consolidation comparing with the eastern part of the belt (Persian-Oman). Its terranes (from Zagros to Makran) and ophiolites were joined to Arabian platform in the Middle Cretaceous (Senomanian-Turonian). Many authors note an important role of Zagros terrane in the region under study and within the Caucasian-Arabian Sintaxis (e.g., Reilinger et al., 2006; Bordenave, 2008; Agard et al., 2011; Verges et al., 2011; Sharkov et al., 2015; Tunini et al., 2015). We propose that present study will unmask some tectono-geodynamic peculiarities of this complex tectonic unit. The Mesozoic terrane belt was delineated in the Eastern Mediterranean by the use of variety of geological and geophysical methods (multilevel gravity and magnetic data examination, thermal data analysis, seismic and seismological data) application (Ben- Avraham et al., 2002; Eppelbaum et al., 2012; Eppelbaum, 2015; Eppelbaum and Katz, 2015a, 2015b, 2016). At the same time, eastern Zagros-Makran part of the Mesozoic terrane belt never was analyzed as a separately developing structural part (unit) of the Arabian craton. In all known paleogeographical reconstructions the Zagros-Makran structure is shown as a part of its northern periphery. However, analysis of facial, sedimentary and structural data (presented in Bordenave, 2008) indicates that there is a sharp discordant joining between the Arabian craton and Zagros belt. Axes of anticline structures of the Arabian craton have a meridional strike, while axes of the Zagros anticline structures are disposed discordantly to them at SW 35 - 500. Besides this, paleogeological maps of Paleozoic (Bordenave, 2008) indicate that Devonian and Carboniferous deposits widely developed within the Arabian craton, do not presented in the Zagros belt. It testifies an uplift of Zagros structure and its isolated evaluation in the post-Carboniferous time when the Tethys Ocean began to form. Geological factors of Zagros structure isolation indicate that it was possibly a part of terrane belt in the southern part of the Neothetys Ocean forming. It is necessary to take into account that Zagros structure most likely occupied different tectonic positions at different periods of geological time: (1) up to Carboniferous period Zagros was a part of the Eastern Arabian Craton, (2) in the interval between Permian and Middle Cretaceous it was a part of the terrane belt within Neotethys, (3) at present it is a marginal part of the Arabian lithospheric plate. All three aforementioned items find a direct reflection in the compiled gravity and SGT maps: (1) Common structural-geophysical properties of Zagros structure and Arabian craton can be recognized in informational and gradient gravity field transformations; (2) Examination of initial gravity map, entropial transformation map and deep structure map testify that Zagros is an independent structural unit within the Mesozoic terrane belt. Presence of thick Cenozoic sediments in the eastern part of Arabian Plate essentially limits application of conventional geological methods; therefore, contouring of boundaries between the Mesozoic terrane belt and Precambrian platform is possible mainly by regional geophysical data analysis. Sharp changing of gravity pattern in all three afore- mentioned maps enables to utilize this property as criterion for delineation of southern boundary of the Mesozoic terrane belt; (3) Examination of the MSA map unambiguously indicates that Zagros suture is a marginal part of the Arabian lithospheric plate. REFERENCES Agard, P., Omrani, G., Jolivet, L., Whitechurch, H., Vrielynck, B., Spakman, W., Monie, P., Meyer, B. and Wortel, R., 2011. Zagros orogeny: A subduction-dominated process. Geological Magazine, 148, Nos. 5-6, 692-725. Bastow, I. D., Keir, D. and Daly, E., 2011. The Ethiopia Afar Geoscientific Experiment (EAGLE): Probing the transition from continental rifting to incipient seafloor spreading, In: (L. Beccaluva, G. Bianchini, and M. Wilson, Eds.), Volcanism and Evolution of the African Lithosphere. The Geol. Society of America, Spec. Paper 478, 51-76. Ben-Avraham, Z., Ginzburg, A., Makris, J. and Eppelbaum, L., 2002. Crustal structure of the Levant basin, Eastern Mediterranean. Tectonophysics, 346, 23-43. Bordenave, M. L., 2008. The origin of the Permo-Triassic gas accumulations in the Iranian Zagros foldbelt and contiguous offshore areas: A review of the Paleozoic petroleum system. Jour. of Petroleum Geology, 31, No. 1, 3-42. Eppelbaum, L.V., 2015. Comparison of 3D integrated geophysical modeling in the South Caucasian and Eastern Mediterranean segments of the Alpine-Himalayan tectonic belt. Izv. Acad. Sci. Azerb. Rep., Ser.: Earth Sciences, No. 3, 25-45. Eppelbaum, L. V. and Katz, Y. I., 2012. Key features of seismo-neotectonic pattern of the Eastern Mediterranean. Izvestiya Acad. Sci. Azerb. Rep., Ser.: Earth Sciences, No. 3, 29-40. Eppelbaum, L. V. and Katz, Yu. I., 2015a. Newly Developed Paleomagnetic Map of the Easternmost Mediterranean Unmasks Geodynamic History of this Region. Central European Jour. of Geosciences (Open Geosciences), 7, No. 1, 95-117. Eppelbaum, L. V. and Katz, Yu. I., 1915b. Eastern Mediterranean: Combined geological- geophysical zonation and paleogeodynamics of the Mesozoic and Cenozoic structural- sedimentation stages. Marine and Petroleum Geology, 65, 198-216. Eppelbaum, L. V. and Katz, Yu. I., 2016. Tectono-Geophysical Zonation of the Near and Middle East and Eastern Africa. International Journal of Geology, 10, 1-10. Eppelbaum, L. V., Katz, Y. I. and Ben-Avraham, Z., 2012. Israel - Petroleum Geology and Prospective Provinces. AAPG European Newsletter, No. 4, 4-9. Eppelbaum, L. V. and Khesin, B. E., 2012. Geophysical Studies in the Caucasus. Springer, Heidelberg - N.Y. - London. Eppelbaum, L.V., Nikolaev, A.V. and Katz, Y.I., 2014. Space location of the Kiama paleomagnetic hyperzone of inverse polarity in the crust of the eastern Mediterranean. Doklady Earth Sciences (Springer), 457, No. 6, 710-714. Reilinger, R. E., McClusky, S., Vernant, P., Lawrence, S., Ergintav, S., Cakmak, R., Ozener, H., Kadirov, F., Guliev, I., Stepanyan, R., Nadariya, M., Hahubia, G., Mahmoud, S., Sakr, K., ArRajehi, A., Paradissis, D., Al-Aydrus, A., Prilepin, M., Guseva, T., Evren, E., Dmitrotsa, A. Filikov, S.V., Gomez, F., Al-Ghazzi, R. and Karam, G., 2006. GPS constraints on continental deformation in the Africa-Arabia-Eurasia continental collision zone and implications for the dynamics of plate interactions. Jour. of Geophysical Research, BO5411, doi: 10.1029/2005JB004051, 1-26. Robertson, A., 2004. Development of concepts concerning the genesis and emplacement of Tethyan ophiolites in the Eastern Mediterranean and Oman regions. Tectonophysics, 66, 331-387. Sandwell, D. T. and Smith, W. H. F., 2009. Global marine gravity from retracked Geosat and ERS-1 altimetry: Ridge Segmentation versus spreading rate. Journal of Geophysical Research, 114, B01411, 1-18. Sharkov, E., Lebedev, V., Chugaev, A., Zabarinskaya, L., Rodnikov, A., Sergeeva, N. and Safonova, I., 2015. The Caucasian-Arabian segment of the Alpine-Himalayan collisional belt: Geology, volcanism and neotectonics. Geoscience Frontiers, 6, 513-522. Stern, R. J., Johnson, P. R., Kroner, A. and Yibas, B., 2004. Neoproterozoic ophiolites of the Arabian-Nubian Shield. Developments in Precambrian Geology, 13, 95-128. Tunini, L., Jimenez-Munt, I., Fernandes, M., Verges, J. and Villasenor, A., 2015. Lithospheric mantle heterogeneities beneath the Zagros Mountains and the Iranian Plateau: A petrological-geophysical study. Geophysical Jour. International, 200, 596-614. Verges, J., Saura, E., Casciello, E., Fernandez, M., Villasenor, A., Jimenez-Munt, I. and Garsia- Castellanos, D., 2011. Crustal-scale cross-sections across the NW Zagros belt: implications for the Arabian margin reconstruction. Geological Magazine, doi: 10.1017/S0016756811000331, 1-23. Yirgu, G., Ebinger, C. J. and Maguire, P. K. H., 2006. The Afar volcanic province within the East African Rift System: Introduction. In: (Yirgu, G., Ebinger, C. J. and Maguire, P. K. H., Eds.), The Afar Volcanic Province within the East African Rift System. Geological Society, London, Special Publications, 259, 1-6.

Pre-folding fracture development in the Lurestan region of the Zagros Fold and Thrust Belt: constraints from early fracture sets in the Shabazan and Asmari Formations

NASA Astrophysics Data System (ADS)

Corradetti, Amerigo; Tavani, Stefano; D'Assisi Tramparulo, Francesco; Prinzi, Ernesto Paolo; Vitale, Stefano; Parente, Mariano; Morsalnejad, Davoud; Mazzoli, Stefano

2017-04-01

In the Zagros Fold and Thrust Belt (FTB), the timing of fracture development with respect to folding is debated. Multiple fracture systems occur in the area. These include "typical" fracture systems that are oriented parallel and orthogonal to the NW-SE strike of the belt, as well as sets oriented N-S and E-W. The interpretation of the N-S and E-W sets is controversial. Despite the general consensus about the first-order relationship between these fractures and inherited N-S striking basement faults, their timing and kinematic significance is not yet fully understood. The ambiguous crosscutting/abutting relationships with the NE-SW and NW-SE sets, together with the difficulty of framing them into the classical scenario of fracturing in foreland basin systems, has led to the development of different hypotheses about the timing of N-S and E-W sets. For the generation of these structures, both pre- and syn-thrusting interpretations have been proposed. In this work, we report on the occurrence of bed-perpendicular fracture sets in the upper part of the Shabazan (Eocene) and in the Asmari (Oligo-Miocene) Formations of the Zagros FTB. These fractures have the peculiarity of being filled with karst material. Such filled fractures are preserved in beds showing variable angles of dip, ranging from horizontal to vertical. Their homogeneous distribution in variably dipping beds around folds undoubtedly point to an origin of these fracture sets predating the tilting of the strata in which they are contained. Therefore, fracture development and related infilling occurred at an early stage, in still flat lying strata, following the deposition of the top Shabazan and Asmari Formations. Such a deposition took place within the general framework of ongoing shortening in the Zagros. This process, occurring since the Late Cretaceous, progressively led to folding of the syn-orogenic Shabazan and Asmari Formations subsequently to the development of the studied filled fractures.

Ophiolites of Iran: Keys to understanding the tectonic evolution of SW Asia: (II) Mesozoic ophiolites

NASA Astrophysics Data System (ADS)

Moghadam, Hadi Shafaii; Stern, Robert J.

2015-03-01

Iran is a mosaic of continental terranes of Cadomian (520-600 Ma) age, stitched together along sutures decorated by Paleozoic and Mesozoic ophiolites. Here we present the current understanding of the Mesozoic (and rare Cenozoic) ophiolites of Iran for the international geoscientific audience. We summarize field, chemical and geochronological data from the literature and our own unpublished data. Mesozoic ophiolites of Iran are mostly Cretaceous in age and are related to the Neotethys and associated backarc basins on the S flank of Eurasia. These ophiolites can be subdivided into five belts: 1. Late Cretaceous Zagros outer belt ophiolites (ZOB) along the Main Zagros Thrust including Late Cretaceous-Early Paleocene Maku-Khoy-Salmas ophiolites in NW Iran as well as Kermanshah-Kurdistan, Neyriz and Esfandagheh (Haji Abad) ophiolites, also Late Cretaceous-Eocene ophiolites along the Iraq-Iran border; 2. Late Cretaceous Zagros inner belt ophiolites (ZIB) including Nain, Dehshir, Shahr-e-Babak and Balvard-Baft ophiolites along the southern periphery of the Central Iranian block and bending north into it; 3. Late Cretaceous-Early Paleocene Sabzevar-Torbat-e-Heydarieh ophiolites of NE Iran; 4. Early to Late Cretaceous Birjand-Nehbandan-Tchehel-Kureh ophiolites in eastern Iran between the Lut and Afghan blocks; and 5. Late Jurassic-Cretaceous Makran ophiolites of SE Iran including Kahnuj ophiolites. Most Mesozoic ophiolites of Iran show supra-subduction zone (SSZ) geochemical signatures, indicating that SW Asia was a site of plate convergence during Late Mesozoic time, but also include a significant proportion showing ocean-island basalt affinities, perhaps indicating the involvement of subcontinental lithospheric mantle.

Deformation Mechanisms of Darreh Sary Metapelites, Sanandaj‒Sirjan Zone, Iran

NASA Astrophysics Data System (ADS)

Hemmati, O.; Tabatabaei Manesh, S. M.; Nadimi, A. R.

2018-03-01

The Darreh Sary metapelitic rocks are located in the northeast of Zagros orogenic belt and Sanandaj-Sirjan structural zone. The lithological composition of these rocks includes slate, phyllite, muscovitebiotite schist, garnet schist, staurolite-garnet schist and staurolite schist. The shale is the protolith of these metamorphic rocks, which was originated from the continental island arc tectonic setting and has been subjected to processes of Zagros orogeny. The deformation mechanisms in these rocks include bulging recrystallization (BLG), subgrain rotation recrystallization (SGR) and grain boundary migration recrystallization (GBM), which are considered as the key to estimate the deformation temperature of the rocks. The estimated ranges of deformation temperature and depth in these rocks show the temperatures of 275-375, 375-500, and >500°C and the depths of 10 to 17 km. The observed structures in these rocks such as faults, fractures and folds, often with the NW-SE direction coordinate with the structural trends of Zagros orogenic belt structures. The S-C mylonite fabrics is observed in these rocks with other microstructures such as mica fish, σ fabric and garnet deformation indicate the dextral shear deformation movements of study area. Based on the obtained results of this research, the stages of tectonic evolution of Darreh Sary area were developed.

Distributed deformation in the Zagros fold-and-thrust belt: insights from geomorphology

NASA Astrophysics Data System (ADS)

Obaid, Ahmed; Allen, Mark

2017-04-01

The Zagros fold-and-thrust belt is part of the active Arabia-Eurasia collision zone, and is an excellent region to study the interactions of tectonics and landscape. In this work we present results of a geomorphic analysis covering the entire range, coupled with more detailed analysis of the Kirkuk Embayment, Iraq. This particular region is a low elevation, low relief region of the Zagros, important for the enormous oil and gas reserves held in late Cenozoic anticlinal traps. Constraints from published earthquake focal mechanisms and hydrocarbon industry sub-surface data are combined with original fieldwork observations in northern Iraq, to produce a new regional cross-section and structural interpretation for the Kirkuk Embayment. We find that overall late Cenozoic shortening across the Embayment is on the order of 5%, representing only a few km. This deformation takes place on a series of anticlines, which are interpreted as overlying steep, planar, basement thrusts. These thrusts are further interpreted as reactivated normal faults, on the basis of (rare) published seismic data. The regional earthquake record confirms the basement involvement, although detachments within the sedimentary succession are also important, especially within the Middle Miocene Fat'ha Formation. Overall, the Zagros is sometimes represented as having a few major thrusts each persistent for 100s of km along the strike of the range. However, these faults are very rarely associated with major structural relief and/or surface fault ruptures during earthquakes. We have analysed the hypsometry of the range and find only gradational changes in the hypsometric integral of drainage basins across strike. This contrasts with regions such as the eastern Tibetan Plateau, where published analysis has revealed abrupt changes, correlating with the surface traces of active thrusts. Our interpretation is that the hypsometry of the Zagros reflects distributed deformation on numerous smaller faults, rather than major uplift on a small number of laterally continuous nappes.

Evolution of the stress fields in the Zagros Foreland Folded Belt using focal mechanisms and kinematic analyses: the case of the Fars salient, Iran

NASA Astrophysics Data System (ADS)

Sarkarinejad, Khalil; Zafarmand, Bahareh; Oveisi, Behnam

2018-03-01

The NW-SE trending Zagros orogenic belt was initiated during the convergence of the Afro-Arabian continent and the Iranian microcontinent in the Late Cretaceous. Ongoing convergence is confirmed by intense seismicity related to compressional stresses collision-related in the Zagros orogenic belt by reactivation of an early extensional faulting to latter compressional segmented strike-slip and dip-slip faulting. These activities are strongly related either to the deep-seated basement fault activities (deep-seated earthquakes) underlies the sedimentary cover or gently dipping shallow-seated décollement horizon of the rheological weak rocks of the infra-Cambrian Hormuz salt. The compressional stress regimes in the different units play an important role in controlling the stress conditions between the different units within the sedimentary cover and basement. A significant set of nearly N-S trending right-lateral strike-slip faults exists throughout the study area in the Fars area in the Zagros Foreland Folded Belt. Fault-slip and focal mechanism data were analyzed using the stress inversion method to reconstruct the paleo and recent stress conditions. The results suggest that the current direction of maximum principal stress averages N19°E, with N38°E that for the past from Cretaceous to Tertiary (although a few sites on the Kar-e-Bass fault yield a different direction). The results are consistent with the collision of the Afro-Arabian continent and the Iranian microcontinent. The difference between the current and paleo-stress directions indicates an anticlockwise rotation in the maximum principle stress direction over time. This difference resulted from changes in the continental convergence path, but was also influenced by the local structural evolution, including the lateral propagation of folds and the presence of several local décollement horizons that facilitated decoupling of the deformation between the basement and the sedimentary cover. The obliquity of the maximum compressional stress into the fault trends reveals a typical stress partitioning of thrust and strike-slip motion in the Kazerun, Kar-e-Bass, Sabz-Pushan, and Sarvestan fault zones that caused these fault zones behave as segmented strike-slip and dip-slip faults.

Seismicity of the Earth 1900–2010 Middle East and vicinity

USGS Publications Warehouse

Jenkins, Jennifer; Turner, Bethan; Turner, Rebecca; Hayes, Gavin P.; Davies, Sian; Dart, Richard L.; Tarr, Arthur C.; Villaseñor, Antonio; Benz, Harley M.

2013-01-01

No fewer than four major tectonic plates (Arabia, Eurasia, India, and Africa) and one smaller tectonic block (Anatolia) are responsible for seismicity and tectonics in the Middle East and surrounding region. Geologic development of the region is a consequence of a number of first-order plate tectonic processes that include subduction, large-scale transform faulting, compressional mountain building, and crustal extension. In the east, tectonics are dominated by the collision of the India plate with Eurasia, driving the uplift of the Himalaya, Karakorum, Pamir and Hindu Kush mountain ranges. Beneath the Pamir‒Hindu Kush Mountains of northern Afghanistan, earthquakes occur to depths as great as 200 km as a result of remnant lithospheric subduction. Along the western margin of the India plate, relative motions between India and Eurasia are accommodated by strike-slip, reverse, and oblique-slip faulting, resulting in the complex Sulaiman Range fold and thrust belt, and the major translational Chaman Fault in Afghanistan. Off the south coasts of Pakistan and Iran, the Makran trench is the surface expression of active subduction of the Arabia plate beneath Eurasia. Northwest of this subduction zone, collision between the two plates forms the approximately 1,500-km-long fold and thrust belts of the Zagros Mountains, which cross the whole of western Iran and extend into northeastern Iraq. Tectonics in the eastern Mediterranean region are dominated by complex interactions between the Africa, Arabia, and Eurasia plates, and the Anatolia block. Dominant structures in this region include: the Red Sea Rift, the spreading center between the Africa and Arabia plates; the Dead Sea Transform, a major strike-slip fault, also accommodating Africa-Arabia relative motions; the North Anatolia Fault, a right-lateral strike-slip structure in northern Turkey accommodating much of the translational motion of the Anatolia block westwards with respect to Eurasia and Africa; and the Cyprian Arc, a convergent boundary between the Africa plate to the south, and Anatolia Block to the north.

Revised version of the Cenozoic Collision along the Zagros Orogen, Insights from Cr-spinel and Sandstone Modal Analyses.

PubMed

Gholami Zadeh, Parisa; Adabi, Mohammad Hossein; Hisada, Ken-Ichiro; Hosseini-Barzi, Mahboubeh; Sadeghi, Abbas; Ghassemi, Mohammad Reza

2017-09-07

Geoscientists have always considered the Neyriz region, located along the Zagros Suture Zone, an important area of interest because of the outcrops of Neotethys ophiolitic rocks. We carried out a modal analysis of the Cenozoic sandstones and geochemistry of the detrital Cr-spinels at Neyriz region in order to determine their provenance and tectonic evolution in the proximal part of Zagros Basin. Our data shows a clear change in provenance from the Late Cretaceous onwards. As from the Late Cretaceous to Eocene, lithic grains are mostly chert and serpentinite; and higher Cr# values of the detrital Cr-spinel compositions indicate that they originate from the fore-arc peridotites and deposited in an accretionary prism setting during this period. From the Late Oligocene to the Miocene periods, volcaniclastic and carbonate lithic grains show an increasing trend, and in the Miocene, metasedimentary lithic grains appear in the sediments. Ophiolite obduction caused a narrow trough sub-basin to be formed parallel to the general trend of the Zagros Orogeny between the Arabian and Iranian plates in Oligocene. From the Miocene onwards, the axial metamorphic complex belt was uplifted in the upper plate. Therefore, the collision along the Zagros Suture Zone must have occurred in the Late Oligocene.

Quantification of fold growth of frontal antiforms in the Zagros fold and thrust belt (Kurdistan, NE Iraq)

NASA Astrophysics Data System (ADS)

Bretis, Bernhard; Bartl, Nikolaus; Graseman, Bernhard; Lockhart, Duncan

2010-05-01

The Zagros fold and thrust belt is a seismically active orogen, where actual kinematic models based on GPS networks suggest a north-south shortening between Arabian and Eurasian in the order of 1.5-2.5 cm/yr. Most of this deformation is partitioned in south-southwest oriented folding and thrusting with northwest-southeast to north-south trending dextral strike slip faults. The Zagros fold and thrust belt is of great economic interest because it has been estimated that this area contains about 15% of the global recoverable hydrocarbons. Whereas the SE parts of the Zagros have been investigated by detailed geological studies, the NW extent being part of the Republic of Iraq have experienced considerably less attention. In this study we combine field work and remote sensing techniques in order to investigate the interaction of erosion and fold growth in the area NE of Erbil (Kurdistan, Iraq). In particular we focus on the interaction of the transient development of drainage patterns along growing antiforms, which directly reflects the kinematics of progressive fold growth. Detailed geomorphological studies of the Bana Bawi-, Permam- and Safeen fold trains show that these anticlines have not developed from subcylindrical embryonic folds but they have merged from different fold segments that joined laterally during fold amplification. This fold segments with length between 5 and 25 km have been detected by mapping ancient and modern river courses that initially cut the nose of growing folds and eventually got defeated leaving behind a wind gap. Fold segments, propagating in different directions force rivers to join resulting in steep gorges, which dissect the merging fold noses. Along rapidly lateral growing folds (e.g. at the SE end of the Bana Bawi Anticline) we observed "curved wind gaps", a new type of abandoned river course, where form of the wind gap mimics a formed nose of a growing antiform. The inherited curved segments of uplifted curved river courses strongly influence the development of the drainage system. This new model helps to detect embryonic fold segments of subcylindrical folds, which are otherwise difficult to identify.

Fracture patterns in the Zagros fold-and-thrust belt, Kurdistan Region of Iraq

NASA Astrophysics Data System (ADS)

Reif, Daniel; Decker, Kurt; Grasemann, Bernhard; Peresson, Herwig

2012-11-01

Fracture data have been collected in the Kurdistan Region of Iraq, which is a poorly accessible and unexplored area of the Zagros. Pre to early folding NE-SW striking extensional fractures and NW-SE striking contractive elements represent the older set affecting the exposed multilayer of the area. These latter structures are early syn-folding and followed by folding-related mesostructural assemblages, which include elements striking parallel to the axial trend of major folds (longitudinal fractures). Bedding perpendicular joints and veins, and extensional faults belonging to this second fracture set are located in the outer arc of exposed anticlines, whilst longitudinal reverse faults locate in the inner arcs. Consistently, these elements are associated with syn-folding tangential longitudinal strain. The younger two sets are related to E-W extension and NNE-SSW to N-S shortening, frequently displaying reactivation of the older sets. The last shortening event, which is described along the entire Zagros Belt, probably relates with the onset of N-S compression induced by the northward movement of the Arabian plate relative to the Eurasian Plate. In comparison between the inferred palaeostrain directions and the kinematics of recent GPS measurements, we conclude that the N-S compression and the partitioning into NW-SE trending folds and NW to N trending strike-slip faults likely remained unchanged throughout the Neogene tectonic history of the investigated area.

Initial Closure of the Neo-Tethys and Kinematics of the Arabian Crustal Shortening

NASA Astrophysics Data System (ADS)

Pirouz, M.; Avouac, J. P.; Hassanzadeh, J.; Kirschvink, J. L.; Bahroudi, A.

2017-12-01

Exposed transition from passive margin to foreland basin sedimentation in the High Zagros provides chronological constraints on the initial stage of Arabia-Eurasia collision and closure of the Neo-Tethys. Magnetostratigraphy and strontium isotope stratigraphy along two sections near the Zagros suture display that the top of the passive margin Asmari formation has an age of 28 - 29 Ma and is overlain by foreland deposits with a major hiatus. The base of the foreland deposits has an age of ca. 26 Ma in the western Zagros and 21.5 Ma in the eastern Zagros. We detect the onset of forebulge formation within the Asmari Formation around 25 Ma. Combined with available age constraints across the Zagros, our results show that the unconformity is diachronous and records the southwestward migration of the flexural bulge within the Arabian plate at an average rate of 24±2 mm/yr since the collision. We conclude that closure of the Neo-Tethys formed the Zagros collisional wedge at 27±2 Ma. Hence, the Arabia-Eurasia collision could not be the main driver of global cooling which started near the Eocene-Oligocene boundary (ca. 33.7 Ma). We estimate 650 km of forebulge migration since the onset of the collision which consists of 350 km of shortening across the orogen, and 300 km of widening of the wedge and increasing flexural rigidity of Arabia. The average rate of shortening across the Zagros is estimated to be ca. 13 mm/yr over the last 27 Myr; a value comparable to the modern rate. Palinspastic restoration of structural cross-sections and crustal volume conservation accounts for only ca. 200 km of shortening across the Zagros and metamorphic Sanandaj-Sirjan belt implying that at least 150 km of the Arabian crust was underthrust beneath Eurasia without contributing to crustal thickening, possibly due to eclogitization.

Structural, micro-structural and kinematic analyses of channel flow in the Karmostaj salt diapir in the Zagros foreland folded belt, Fars province, Iran

NASA Astrophysics Data System (ADS)

Sarkarinejad, Khalil; Sarshar, Maryam Asadi; Adineh, Sadegh

2018-02-01

One of the main characteristic of the Zagros foreland fold-and-thrust belt and the Zagros foreland folded belt are wide distributions of surface extrusion from the Hormuz salt diapirs. This study examines the structure and kinematic of channel flow in the Karmostaj salt diapir in the southwestern part of the Zagros foreland folded belt. This diapir has reached the surface as a result of the channel flow mechanism and has extruded in the southern limb of the Kuh-Gach anticline which is an asymmetric décollement fold with convergence to the south. Structural and microstructural studies and quantitative finite strain (Rs) and kinematic vorticity number (Wk) analyses were carried out within this salt diapir and its namakier. This was in order to investigate the structural evolution in the salt diapiric system, the characteristics and mechanism of the salt flow and the distribution of flow regimes within the salt diapir and interaction of regional tectonics and salt diaprism. The extruded salt has developed a flow foliation sub-parallel to the remnant bedding recorded by different colors, a variety of internal folds including symmetrical and asymmetrical folds and interference fold patterns, shear zones, and boudins. These structures were used to analyze mechanisms and history of diapiric flow and extrusion. The microstructures, reveal various deformation mechanisms in various parts of salt diapir. The measurements of finite strain show that Rs values in the margin of salt diapir are higher than within its namakier which is consistent with the results of structural studies. Mean kinematic vorticity number (Wm) measured in steady state deformation of diapir and namakier is Wm = 0.45-0.48 ± 0.13. The estimated mean finite deformation (Wm) values indicate that 67.8% pure shear and 32.2% simple shear deformation were involved; the implications of which are discussed. The vorticity of flow indicates that in the early stage of growth, Poiseuille flow was the dominate mechanism, especially in the core of diapir with higher pure shear component relative to simple shear component, whilst a Couette flow at the margins of diapir is the dominate mechanism with higher simple shear component relative to pure shear component. The obtained kinematic vorticity number reflects spatial partitioning of dominantly Poiseuille flow in core and Couette flow along edges of diapir. These two mechanisms reflect a persistent flow governed by a simultaneous combination of pure shear and simple shear in a hybrid Poiseuille-Coutte Flow.

Retrodeforming the Arabia-Eurasia collision zone : Age of collision and magnitude of continental subduction

NASA Astrophysics Data System (ADS)

McQuarrie, N.; van Hinsbergen, D. J. J.

2012-04-01

When did continents collide, and how is convergence partitioned after collision are first order questions that seem to defy consensus along the Alpine-Himalyan orogen. Estimates on the age of collision for Arabia and Eurasia range from late Cretaceous to Pliocene, based on a wide variety of presumed geologic responses. Both lower Miocene synorgenic strata with growth structures adjacent to the main Zagros fault and upper Oligocene to lower Miocene overlap strata over post-collisional thrusts are derived from Eurasia and require that collision was underway at least by ~25-24 Ma. However, upper plate deformation, exhumation and sedimentation are used to argue for an older, 35 Ma collision age. Africa-North America-Eurasia plate circuit rotations, combined with Red Sea rotations provides precise estimates of the relative positions between the northern Arabian margin and the southern Eurasia margin. Plate circuits indicate, from NW to SE along the collision zone 490-650 km of post-25 Ma Arabia-Eurasia convergence and 810-1070 km since 35 Ma. To assess the consequences of these collision ages for the amount of Arabian continental subduction, we compile all documented shortening within the orogen. The Zagros fold-thrust belt consists of thrusted upper crust that was offscraped from subducted Arabian continental lithosphere. Balanced cross-sections give 105-180 km of Zagros shortening (including estimates from the Zagros proper, 45-90 km, and the Zagros "crush" zone, 60-90 km). Shortening within Eurasia is estimated to be 53-75 km through the Kopet Dagh and Alborz Mountains, plus 38 km across Central Iran. These estimates suggest that the orogen has shortened 200 to 300 km since the early Miocene. Both a 25 and a 35 Ma collision estimate thus requires that a considerable portion of the Arabian plate subducted without recognized accretion of its upper crust. To balance plate circuits and documented shortening requires whole-sale subduction of ~500-800 km of continental crust since 35 Ma; for a 25 Ma collision this would be between 190-450 km. The ophiolitic fragments preserved along the suture zone allow us to test the magnitude of possible continental subduction. The Oman Ophiolite preserves the geometry and distance over which ophiolites obduced over the northern margin of Arabia in the late Cretaceous. The distance from the southwestern edge of the ophiolite to the northeastern edge of the continent is 180 km, suggesting that the Arabian continental margin plus overlying ophiolites may have extended ~200 km beyond the Main Zagros fault. Assuming that 200 km of Arabian continental margin and overlying ophiolites subducted entirely, except the few remnant ophiolite slivers remaining in the suture zone, would reconstruct ~ 400-500 km of post-collisional Arabia-Eurasia convergence, consistent with a ~25 Ma collision age. As much as 500-800 km of continental subduction required by an earlier (~35 Ma) collision age seems unlikely.

Multi-phase inversion tectonics related to the Hendijan-Nowrooz-Khafji Fault activity, Zagros Mountains, SW Iran

NASA Astrophysics Data System (ADS)

Kazem Shiroodi, Sadjad; Ghafoori, Mohammad; Faghih, Ali; Ghanadian, Mostafa; Lashkaripour, Gholamreza; Hafezi Moghadas, Naser

2015-11-01

Distinctive characteristics of inverted structures make them important criteria for the identification of certain structural styles of folded belts. The interpretation of 3D seismic reflection and well data sheds new light on the structural evolution and age of inverted structures associated to the Hendijan-Nowrooz-Khafji Fault within the Persian Gulf Basin and northeastern margin of Afro-Arabian plate. Analysis of thickness variations of growth strata using "T-Z plot" (thickness versus throw plot) method revealed the kinematics of the fault. Obtained results show that the fault has experienced a multi-phase evolutionary history over six different extension and compression deformation events (i.e. positive and negative inversion) between 252.2 and 11.62 Ma. This cyclic activity of the growth fault was resulted from alteration of sedimentary processes during continuous fault slip. The structural development of the study area both during positive and negative inversion geometry styles was ultimately controlled by the relative motion between the Afro-Arabian and Central-Iranian plates.

Underplating along the northern portion of the Zagros suture zone, Iran

NASA Astrophysics Data System (ADS)

Motaghi, K.; Shabanian, E.; Kalvandi, F.

2017-07-01

A 2-D absolute shear wave velocity model has been resolved beneath a seismic profile across the northeastern margin of the Arabian Plate-Central Iran by simultaneously inverting data from P receiver functions and fundamental mode Rayleigh wave phase velocity. The data were gathered by a linear seismic array crossing the Zagros fold and thrust belt, Urmia-Dokhtar magmatic arc and Central Iran block assemblage as three major structural components of the Arabia-Eurasia collision. Our model shows a low-velocity tongue protruding from upper to lower crust which, north of the Zagros suture, indicates the signature of an intracontinent low-strength shear zone between the underthrusting and overriding continents. The velocity model confirms the presence of a significant crustal root as well as a thick high-velocity lithosphere in footwall of the suture, continuing northwards beneath the overriding continent for at least 200 km. These features are interpreted as underthrusting of Arabia beneath Central Iran. Time to depth migration of P receiver functions reveals an intracrustal flat interface at ∼17 km depth south of the suture; we interpret it as a significant decoupling within the upper crust. All these crustal scale structural features coherently explain different styles and kinematics of deformation in northern Zagros (Lorestan zone) with respect to its southern part (Fars zone).

Folding pattern in the Fars province, Zagros folded belt: case study on the Karbasi and Khaftar anticlines, interior Fars, Iran

NASA Astrophysics Data System (ADS)

Maleki, Z.; Arian, M.; Solgi, A.

2015-08-01

The anticlines in Fars region, which are located in Zagros fold-thrust belt, are valuable because they possess several hydrocarbons and this area is easily recognized by the NW-SE trending parallel anticlines that verge to the SW. According to the geological classification, the study area is located in Interior Fars region. Due to increasing complication of structural geometry in Fars region and necessity to explore activities for deeper horizons especially the Paleozoic ones, the analysis of fold style elements, which is known as one of the main parts in structural studies, seems necessary. The Karbasi and Khaftar anticlines are case study anticlines in the interior Fars sub-basin (Fassa area). These anticlines have an asymmetric structure and some faults with large strike separation are observed in these structures. Due to increasing complication of structural geometry in Fars region and necessity to explore activities for deeper horizons especially the Paleozoic ones, the analysis of fold style elements, which is known as one of the main parts in structural studies, seems necessary. Description of fold geometry is important because it allows comparisons within and between folds and also allows us to recognize patterns in the occurrence and distribution of fold systems. The main aim of this paper is to determine fold style elements and folding pattern in the study area. This paper presents a part of the results of a regional study of Fars province in the Zagros Simply folded belt, based on satellite images, geological maps, and well data. In the Interior Fars area, it seems that folding pattern is controlled by structural elements such as the Nezamabad basement fault and Dashtak formation. In fact, as a middle detachment unit, Dashtak formation plays an important role regarding folding geometry and fold in style in the study area.

Structural modeling of the Zagros fold-and-thrust belt (Iraq) combining field work and remote sensing techniques

NASA Astrophysics Data System (ADS)

Reif, D.; Grasemann, B.; Faber, R.; Lockhart, D.

2009-04-01

The Zagros fold-and-thrust belt is known for its spectacular fold trains, which have formed in detached Phanerozoic sedimentary cover rocks above a shortened crystalline Precambrian basement. Orogeny evolved through the Late Cretaceous to Miocene collision between the Arabian and Eurasian plate, during which the Neotethys oceanic basin was closed. Still active deformation shortening in the order of 2-2.5 cm/yr is partitioned in S-SW directed folding and thrusting of the Zagros fold-and-thrust belt and NW-SE to N-S trending dextral strike slip faults. The sub-cylindrical doubly-plunging fold trains with wavelengths of 5 - 10 km host more than half of the world's hydrocarbon reserves in mostly anticlinal traps. In this work we investigate the three dimensional structure of the Zagros fold-and-thrust belt in the Kurdistan region of Iraq. The mapped region is situated NE from the city of Erbil and comprises mainly Cretaceous to Cenozoic folded sediments consisting of mainly limestones, dolomites, sandstones, siltstones, claystones and conglomerates. Although the overall security situation in Kurdistan is much better than in the rest of Iraq, structural field mapping was restricted to sections along the main roads perpendicular to the strike of the fold trains, mainly because of the contamination of the area with landmines and unexploded ordnance, a problem that dates back to the end of World War Two. Landmines were also used by the central government in the 1960s and 1970s in order to subdue Kurdish groups. During the 1980-1988 Iran-Iraq War, the north was mined again. In order to extend the structural measurements statistically over the investigated area resulting in a three-dimensional model of the fold trains, we used the Fault Trace module of the WinGeol software (www.terramath.com). This package allows the interactive mapping and visualization of the spatial orientations (i.e. dip and strike) of geological finite planar structures (e.g. faults, lithological contacts) from digital elevation models. The minimum vegetation cover in the investigated area allows an accurate picking of geological planes from the digital elevation model, which has been draped with LANDSAT and ASTER satellite images in order to enhance the contrast of lithological contacts. Geological planes of finite extent are interpolated in the Fault Trace module by virtual planes, which can be translated and rotated in any spatial direction. Comparison of measured data from the field with interpolated spatial orientations from the remote sensing data demonstrate that the calculated dip and strike values can be reproduced within the measurements error of a geological field compass.

Crustal structure and evolution of the NW Zagros Mountains (Iran): Insights from numerical modeling of the interplay between surface and tectonic processes

NASA Astrophysics Data System (ADS)

Saura, Eduard; Garcia-Castellanos, Daniel; Casciello, Emilio; Vergés, Jaume

2014-05-01

Protracted Arabia-Eurasia convergence resulted in the closure of the >2000 km wide Neo-Tethys Ocean from early Late Cretaceous to Recent. This process was controlled by the structure of the NE margin of the Arabian plate, the NE-dipping oceanic subduction beneath Eurasia, the obduction of oceanic lithosphere and the collision of small continental and volcanic arc domains of the SW margin of Eurasia. The evolution of the Zagros Amiran and Mesopotamian foreland basins is studied in this work along a ~700 km long transect in NW Zagros constrained by field, seismic and published data. We use the well-defined geometries and ages of the Amiran and Mesopotamian foreland basins to estimate the elastic thickness of the lithosphere and model the evolution of the deformation to quantitatively link the topographic, tectonic and sedimentary evolution of the system. Modelling results show two major stages of emplacement. The obduction (pre-collision) stage involves the thin thrust sheets of the Kermanshah complex together with the Bisotun basement. The collision stage corresponds to the emplacement of the basement duplex and associated crustal thickening, coeval to the out of sequence emplacement of Gaveh Rud and Imbricated Zone in the hinterland. The geodynamic model is consistent with the history of the foreland basins, with the regional isostasy model, and with a simple scenario for the surface process efficiency. The emplacement of Bisotun basement during obduction tectonically loaded and flexed the Arabian plate triggering deposition in the Amiran foreland basin. The basement units emplaced during the last 10 My, flexed the Arabian plate below the Mesopotamian basin. During this stage, material eroded from the Simply Folded belt and the Imbricated zone was not enough to fill the Mesopotamian basin, which, according to our numerical model results, required a maximum additional sediment supply of 80 m/Myr. This additional supply had to be provided by an axial drainage system, which can be correlated by the income of paleo-Tigris and paleo-Eufrates rivers transporting sediments from north-westernmost areas.

Study of Upper Miocene Oysters(Plecypoda) From the Mishan Formation in south west of Firuzabad, Fars, Iran(Zagros mountain)

NASA Astrophysics Data System (ADS)

Dehbozorgi, Mehdi; Sabouhi, Mostafa; Nabavi, Hamid

2010-05-01

The out crapes of Mishan Formation located in Aghar area(Firuzabad city) south west of Fars and 70km south west of Firuzabad. this Formation mostly consist of limestone, marly limestone and marlstone with 800m thickness. 6key beds distinctive from limestone beds are recognized in this area. this key beds are useful for local and regional correlation in Zagros mountains. the key beds from base to top are: Red algae, Bryozoa, Gastropoda and Plecypoda, Crabs and Oysters. Mishan Formation in this area is between Gachsaran F.M(Under Formation), Conformable and Aghajari F.M(Upper Formation), Conformable. With due attention to rang and distribution of the Macrofossils, 5 local assmblage biozone were recognized, that is confirming time limit from Early- Upper Miocene. this research cheked and controled a biostrom Plecypoda(Oysters) level by thickness 3- 4m. this biostrom located around 550m the base of section. Ofcurse more of this Plecypoda be assinged to order pterriodia and Genus Oyster. Along with Oysters, Pecten and Venus can be see. This biostrom made up a bioclastic shoal shallow deep in the margin of sea Miocene. This Oysters report from Mishan Formation of Firuzabad, Fars, Zagros, Iran: Ostrea virleti var. crassicostat, Ostrea virleti Desh var. persica, Ostrea digitatai Echiwald var. rohlfsi, Ostrea lamellose. Ostrea cf. biowwondeli. Master of science in Geology (Paleontology), University of Isfahan, Iran.

Crustal structure of central Syria: The intracontinental Palmyride mountain belt

NASA Astrophysics Data System (ADS)

Al-Saad, Damen; Sawaf, Tarif; Gebran, Ali; Barazangi, Muawia; Best, John A.; Chaimov, Thomas A.

1992-07-01

Along a 450-km transect across central Syria seismic reflection data, borehole information, potential field data and surface geologic mapping have been combined to examine the crustal structure of the northern Arabian platform beneath Syria. The transect is surrounded by the major plate boundaries of the Middle East, including the Dead Sea transform fault system along the Levantine margin to the west, the Bitlis suture and East Anatolian fault to the north, and the Zagros collisional belt to the northeast and east. Three main tectonic provinces of the northern Arabian platform in Syria are crossed by this transect from south to north: the Rutbah uplift, the Palmyra fold-thrust belt, and the Aleppo plateau. The Rutbah uplift in southern Syria is a broad, domal basement-cored structure with a thick Phanerozoic (mostly Paleozoic) cover of 6-7 km. Isopachs based on well and seismic reflection data indicate that this region was an early Paleozoic depocenter. The Palmyra fold-thrust belt, the northeastern arm of the Syrian Arc, is a northeast-southwest-trending intracontinental mountain belt that acts as a mobile tectonic zone between the relatively stable Rutbah uplift to the south and the less stable Aleppo plateau to the north. Short-wavelength en-echelon folds characterized by relatively steep, faulted southeast flanks dominate in the southwest, most strongly deformed segment of the belt, while a complex system of deeply rooted faults and broad folds characterize the northeastern region, described in this study. The Aleppo plateau lies immediately north of the Palmyride belt, with a combined Paleozoic and Mesozoic sedimentary section that averages 4-5 km in thickness. Although this region appears relatively undeformed on seismic reflection data when compared to Palmyride deformation, a system of near-vertical, probable strike-slip faults crosscut the region in a dominantly northeasterly direction. Gravity and magnetic modeling constrains the deep crustal structure along the transect. The crustal thickness is estimated to be approximately 38 km. Interpretation of the gravity data indicates two different crustal blocks beneath the Rutbah uplift and the Aleppo plateau, and the presence of a crustal-penetrating, high-density body beneath the northeast Palmyrides. The two distinct crustal blocks suggest that they were accreted possibly along a suture zone and/or a major strike-slip fault zone located approximately in the present-day position of the Palmyrides. The age of the accretion is estimated to be Proterozoic or Early Cambrian, based on the observation of a pervasive reflection (interpreted as the Middle Cambrian Burj limestone) in the Rutbah uplift and in the Aleppo plateau and by analogy with the well-mapped Proterozoic sutures of the Arabian shield to the south.

Earth Observation taken during the 41G mission

NASA Image and Video Library

2009-06-25

41G-120-163 (5-13 Oct 1984) --- The long, linear parallel ridges of the Zagros Mountains of southwestern Iran. Dark, round salt domes intrude from deep beneath the earth to produce oil, much of which has yet to be exploited in this area.

Modelling the role of basement block rotation and strike-slip faulting on structural pattern in the cover units of fold-and-thrust belts

NASA Astrophysics Data System (ADS)

Koyi, Hemin; Nilfouroushan, Faramarz; Hessami, Khaled

2015-04-01

A series of scaled analogue models are run to study the degree of coupling between basement block kinematics and cover deformation. In these models, rigid basal blocks were rotated about vertical axis in a "bookshelf" fashion, which caused strike-slip faulting along the blocks and, to some degrees, in the overlying cover units of loose sand. Three different combinations of cover basement deformations are modeled; cover shortening prior to basement fault movement; basement fault movement prior to shortening of cover units; and simultaneous cover shortening with basement fault movement. Model results show that the effect of basement strike-slip faults depends on the timing of their reactivation during the orogenic process. Pre- and syn-orogen basement strike-slip faults have a significant impact on the structural pattern of the cover units, whereas post-orogenic basement strike-slip faults have less influence on the thickened hinterland of the overlying fold-and-thrust belt. The interaction of basement faulting and cover shortening results in formation of rhomb features. In models with pre- and syn-orogen basement strike-slip faults, rhomb-shaped cover blocks develop as a result of shortening of the overlying cover during basement strike-slip faulting. These rhombic blocks, which have resemblance to flower structures, differ in kinematics, genesis and structural extent. They are bounded by strike-slip faults on two opposite sides and thrusts on the other two sides. In the models, rhomb-shaped cover blocks develop as a result of shortening of the overlying cover during basement strke-slip faulting. Such rhomb features are recognized in the Alborz and Zagros fold-and-thrust belts where cover units are shortened simultaneously with strike-slip faulting in the basement. Model results are also compared with geodetic results obtained from combination of all available GPS velocities in the Zagros and Alborz FTBs. Geodetic results indicate domains of clockwise and anticlockwise rotation in these two FTBs. The typical pattern of structures and their spatial distributions are used to suggest clockwise block rotation of basement blocks about vertical axes and their associated strike-slip faulting in both west-central Alborz and the southeastern part of the Zagros fold-and-thrust belt.

Interference of lithospheric folding in western Central Asia by simultaneous Indian and Arabian plate indentation

NASA Astrophysics Data System (ADS)

Smit, J. H. W.; Cloetingh, S. A. P. L.; Burov, E.; Tesauro, M.; Sokoutis, D.; Kaban, M.

2013-08-01

Large-scale intraplate deformation of the crust and the lithosphere in Central Asia as a result of the indentation of India has been extensively documented. In contrast, the impact of continental collision between Arabia and Eurasia on lithosphere tectonics in front of the main suture zone, has received much less attention. The resulting Neogene shortening and uplift of the external Zagros, Alborz, Kopeh Dagh and Caucasus Mountain belts in Iran and surrounding areas is characterised by a simultaneous onset of major topography growth at ca. 5 Ma. At the same time, subsidence accelerated in the adjacent Caspian, Turan and Amu Darya basins. We present evidence for interference of lithospheric folding patterns induced by the Arabian and Indian collision with Eurasia. Wavelengths and spatial patterns are inferred from satellite-derived topography and gravity models. The observed interference of the patterns of folding appears to be primarily the result of spatial orientation of the two indenters, differences in their convergence velocities and the thermo-mechanical structure of the lithosphere west and east of the Kugitang-Tunka Line.

The rate of rise, fall and gravity spreading at Siahou diapir (Southern Iran)

NASA Astrophysics Data System (ADS)

Aftabi, P.; Roustaie, M.

2009-04-01

InSAR imaging can be used for extracting three dimensional information of the diapirs surface by using the phase part of the radar signal. We used InSAR to examine the cumulative surface deformation between 920706 to 060518, in a 10×10 km region surrounding the salt diapir at Kuh-e-Namak Siahou. The interferograms span periods was between 35-70 and 1248 days. Images acquired in 12 increments provided by ESA. This technique used here involves computation and subsequent combinations of interferometric phase gradient maps were used for mapping the salt flow deformation in the Zagros. Kuh-e-Namak Siahou is one of the salt extrusions currently active in the Zagros range in Iran. Salt rises from a mother salt horizon about 4 km deep and extruded as a dome with glacier on the surface. The geometry and inferred flow pattern of the salt changed between the increments, emphasizing that the extrusion rate and gravity spreading is not steady. Elevations in the salt mountain range from 1000 to 1640 meters and the displacements exceed to 20cm per year . Our InSAR study(Fig1) suggest that the dimensions and velocity of the salt movements are changing between 2 to 20mm per year(-0.7 to0.59 mm per day).The rate of surface dissolution changed between 2 to 4 cm a-1, and its rate of rise out of its orifice at 0 to 200 mm per year. The InSAR study suggest that the vigorous salt extrusion in Siahou is probably active.The deep source probably rise at a similar rates in the past but it fall in the time of InSAR study. The rate of fall was 260 mm per year(for 14 years). The InSAR images suggest that salt extrusion in Siahou flow laterally at rate 20-25 mm per year and the namakiers felt at -2 mm per month. The InSAR results indicated concentric and radial flow in the diapir from a central point at summit and spreading glaciers in sideways.Phase differences measured in our interferograms generally in the range of 0-260 mm/yr(-260 mm) within the studied period, with exceptional high rates that exceed 50 mm/yr in diapir Siahou. Comparison of our InSAR observations with models suggest a similarity in the strain pattern in the model and prototype. Our observations also show that in certain locations of Zagros, movements appear to be structurally controlled by salt flow, and diapirism. This report will improve our understanding on how the salt diapirs work and our capability to predict future flow and the associated hazards for storages in salt and provides the first direct, spatially resolved, measurement of ongoing flow of salt. Key words: Salt tectonics,InSAR,Monitoring,Iran,Zagros,Salt diapir,salt kinematics, Zagros fold-thrust belt, Hormuz salt, analogue modelling,salt extrusion, crustal shortening

Landscape maturity, fold growth sequence and structural style in the Kirkuk Embayment of the Zagros, northern Iraq

NASA Astrophysics Data System (ADS)

Obaid, Ahmed K.; Allen, Mark B.

2017-10-01

The Kirkuk Embayment is located in the southwest of the Zagros fold-and-thrust belt of Iraq. Like fold-and-thrust belts worldwide, the Zagros is conventionally understood to have grown sequentially towards the foreland. Here we use landscape maturity analysis to understand anticline growth in the embayment. Digital Elevation Model (DEM)-based geomorphic indices Hypsometric Integral (HI), Surface Roughness (SR) and their combination Surface Index (SI) have been applied to quantify landscape maturity. The results inform new ideas for the sequence of anticline growth. Maturity indices are highest for the QaraChauq Anticline in the center of the Embayment, then Makhool/Himreen to the south and lastly, the Kirkuk Anticline to the north. The pattern suggests the growth sequence is not classical 'piggy back' thrusting. This result fits the exhumation record, which is loosely constrained by the stratigraphic exposure level. Favored hypotheses for fold growth order are either i) the folds have grown at different times and out of sequence (QaraChauq first, then Makhool/Himreen, and Kirkuk last), or, ii) the growth occurred with different rates of exhumation but at broadly the same time. There are few constraints from available data on syn-tectonic sedimentation patterns. Fold growth across much of the Embayment might have begun within a limited timeframe in the late Miocene-Pliocene, during the deposition of the Mukdadiyah Formation. Another hypothesis is that folds grew in sequence towards the foreland with different rates of exhumation, but we consider this less likely. We also construct a new cross-section for the Embayment, which indicates limited Cenozoic strain: 5% shortening. Analysis of topography and drainage patterns shows two previously-undescribed anticlines with hydrocarbon trap potential, between the Makhool and QaraChauq anticlines.

Geochemistry and geodynamics of the Mawat mafic complex in the Zagros Suture zone, northeast Iraq

NASA Astrophysics Data System (ADS)

Azizi, Hossein; Hadi, Ayten; Asahara, Yoshihiro; Mohammad, Youssef Osman

2013-12-01

The Iraqi Zagros Orogenic Belt includes two separate ophiolite belts, which extend along a northwest-southeast trend near the Iranian border. The outer belt shows ophiolite sequences and originated in the oceanic ridge or supra-subduction zone. The inner belt includes the Mawat complex, which is parallel to the outer belt and is separated by the Biston Avoraman block. The Mawat complex with zoning structures includes sedimentary rocks with mafic interbedded lava and tuff, and thick mafic and ultramafic rocks. This complex does not show a typical ophiolite sequences such as those in Penjween and Bulfat. The Mawat complex shows evidence of dynamic deformation during the Late Cretaceous. Geochemical data suggest that basic rocks have high MgO and are significantly depleted in LREE relative to HREE. In addition they show positive ɛ Nd values (+5 to+8) and low 87Sr/86Sr ratios. The occurrence of some OIB type rocks, high Mg basaltic rocks and some intermediate compositions between these two indicate the evolution of the Mawat complex from primary and depleted source mantle. The absence of a typical ophiolite sequence and the presence of good compatibility of the source magma with magma extracted from the mantle plume suggests that a mantle plume from the D″ layer is more consistent as the source of this complex than the oceanic ridge or supra-subduction zone settings. Based on our proposed model the Mawat basin represents an extensional basin formed during the Late Paleozoic to younger along the Arabian passive margin oriented parallel to the Neo-Tethys oceanic ridge or spreading center. The Mawat extensional basin formed without creation of new oceanic basement. During the extension, huge volumes of mafic lava were intruded into this basin. This basin was squeezed between the Arabian Plate and Biston Avoraman block during the Late Cretaceous.

Anti-Atlas Mountains, Morocco

NASA Technical Reports Server (NTRS)

2002-01-01

The Anti-Atlas Mountains of northern Africa and the nearby Atlas mountains were created by the prolonged collision of the African and Eurasian tectonic plates, beginning about 80 million years ago. Massive sandstone and limestone layers have been crumpled and uplifted more than 4,000 meters in the High Atlas and to lower elevations in the Anti-Atlas. Between more continuous major fold structures, such as the Jbel Ouarkziz in the southwestern Anti-Atlas, tighter secondary folds (arrow) have developed. Earlier, the supercontinent of Pangea rifted apart to form precursors to the Mediterranean and the Atlantic Ocean (Beauchamp and others, 1996). In those seas sands, clays, limey sediments, and evaporite layers (gypsum, rock salt) were deposited. Later, during the mountain-building plate collision, the gypsum layers flowed under the pressure and provided a slippery surface on which overlying rigid rocks could glide (Burkhard, 2001). The broad, open style of folds seen in this view is common where evaporites are involved in the deformation. Other examples can be found in the Southern Zagros of Iran and the Sierra Madre Oriental of Mexico. Information Sources: Beauchamp, W., Barazangi, M., Demnati, A., and El Alji, M., 1996, Intracontinental rifting and inversion: Missour Basin and Atlas Mountains, Morocco: Tulsa, American Association of Petroleum Geologists Bulletin, v. 80, No. 9, p. 1459-1482. Burkhard, Martin, 2001, Tectonics of the Anti-Atlas of Morocco -- Thin-skin/thick-skin relationships in an atypical foreland fold belt. University of Neuchatel, Switzerland: http://www-geol.unine.ch/Structural/Antiatlas.html (accessed 1/29/02). STS108-711-25 was taken in December, 2001 by the crew of Space Shuttle mission 108 using a Hasselblad camera with 250-mm lens. The image is provided by the Earth Sciences and Image Analysis Laboratory at Johnson Space Center. Additional images taken by astronauts and cosmonauts can be viewed at the NASA-JSC Gateway to Astronaut Photography of Earth.

Late Eocene Uplift of the Al Hajar Mountains, Oman, Supported by Stratigraphy and Low-Temperature Thermochronology

NASA Astrophysics Data System (ADS)

Hansman, Reuben J.; Ring, Uwe; Thomson, Stuart N.; den Brok, Bas; Stübner, Konstanze

2017-12-01

Uplift of the Al Hajar Mountains in Oman has been related to either Late Cretaceous ophiolite obduction or the Neogene Zagros collision. To test these hypotheses, the cooling of the central Al Hajar Mountains is constrained by 10 apatite (U-Th)/He (AHe), 15 fission track (AFT), and four zircon (U-Th)/He (ZHe) sample ages. These data show differential cooling between the two major structural culminations of the mountains. In the 3 km high Jabal Akhdar culmination AHe single-grain ages range between 39 ± 2 Ma and 10 ± 1 Ma (2σ errors), AFT ages range from 51 ± 8 Ma to 32 ± 4 Ma, and ZHe single-grain ages range from 62 ± 3 Ma to 39 ± 2 Ma. In the 2 km high Saih Hatat culmination AHe ages range from 26 ± 4 to 12 ± 4 Ma, AFT ages from 73 ± 19 Ma to 57 ± 8 Ma, and ZHe single-grain ages from 81 ± 4 Ma to 58 ± 3 Ma. Thermal modeling demonstrates that cooling associated with uplift and erosion initiated at 40 Ma, indicating that uplift occurred 30 Myr after ophiolite obduction and at least 10 Myr before the Zagros collision. Therefore, this uplift cannot be related to either event. We propose that crustal thickening supporting the topography of the Al Hajar Mountains was caused by a slowdown of Makran subduction and that north Oman took up the residual fraction of N-S convergence between Arabia and Eurasia.

When did the Penglai orogeny begin on Taiwan?: Geochronological and petrographic constraints on the exhumed mountain belts and foreland-basin sequences

NASA Astrophysics Data System (ADS)

Chen, W. S.; Syu, S. J.; Yeh, J. J.

2017-12-01

Foreland basin receives large amounts of synorogenic infill that is eroded from the adjacent exhumed mountain belt, and therefore provides the important information on exhumation evolution. Furthermore, a complete stratigraphic sequence of Taiwan mountain belt consists of five units of Miocene sedimentary rocks (the Western Foothills and the uppermost sequence on the proto-Taiwan mountain belt), Oligocene argillite (the Hsuehshan Range), Eocene quartzite (the Hsuehshan Range), Eocene-Miocene slate and schist (Backbone Range), and Cretaceous schist (Backbone Range) from top to bottom. Based on the progressive unroofing history, the initiation of foreland basin received sedimentary lithic sediments from the uppermost sequence of proto-Taiwan mountain belt, afterwards, and receiving low- to medium-grade metamorphic lithic sediments in ascending order of argillite, quartzite, slate, and schist clasts. Therefore, the sedimentary lithics from mountain belt were deposited which represents the onset of the mountain uplift. In this study, the first appearance of sedimentary lithic sediments occurs in the Hengchun Peninsula at the middle Miocene (ca. 12-10 Ma). Thus, sandstone petrography of the late Miocene formation (10-5.3 Ma) shows a predominantly recycled sedimentary and low-grade metamorphic sources, including sandstone, argillite and quartzite lithic sediments of 10-25% which records erosion to slightly deeper metamorphic terrane on the mountain belt. Based on the results of previous thermogeochronological studies of the Yuli belt, it suggests that the middle Miocene occurred mountain uplift. The occurrence of low-grade metamorphic lithic sediments in the Hengchun Peninsula during late Miocene is coincident with the cooling ages of uplift and denuded Yuli schist belt at the eastern limb of Backbone Range.

3D Reconstruction of geological structures based on remote sensing data: example from Anaran anticline, Lurestan province, Zagros folds and thrust belt, Iran.

NASA Astrophysics Data System (ADS)

Snidero, M.; Amilibia, A.; Gratacos, O.; Muñoz, J. A.

2009-04-01

This work presents a methodological workflow for the 3D reconstruction of geological surfaces at regional scale, based on remote sensing data and geological maps. This workflow has been tested on the reconstruction of the Anaran anticline, located in the Zagros Fold and Thrust belt mountain front. The used remote sensing data-set is a combination of Aster and Spot images as well as a high resolution digital elevation model. A consistent spatial positioning of the complete data-set in a 3D environment is necessary to obtain satisfactory results during the reconstruction. The Aster images have been processed by the Optimum Index Factor (OIF) technique, in order to facilitate the geological mapping. By pansharpening of the resulting Aster image with the SPOT panchromatic one we obtain the final high-resolution image used during the 3D mapping. Structural data (dip data) has been acquired through the analysis of the 3D mapped geological traces. Structural analysis of the resulting data-set allows us to divide the structure in different cylindrical domains. Related plunge lines orientation has been used to project data along the structure, covering areas with little or no information. Once a satisfactory dataset has been acquired, we reconstruct a selected horizon following the dip-domain concept. By manual editing, the obtained surfaces have been adjusted to the mapped geological limits as well as to the modeled faults. With the implementation of the Discrete Smooth Interpolation (DSI) algorithm, the final surfaces have been reconstructed along the anticline. Up to date the results demonstrate that the proposed methodology is a powerful tool for 3D reconstruction of geological surfaces when working with remote sensing data, in very inaccessible areas (eg. Iran, China, Africa). It is especially useful in semiarid regions where the structure strongly controls the topography. The reconstructed surfaces clearly show the geometry in the different sectors of the structure: presence of a back thrust affecting the back limb in the southern part of the anticline, the geometry of the grabens located along the anticline crest, the crosscutting relationship in the north-south faulted zone with the main thrust, the northern dome periclinal closure.

GT-12 - EARTH SKY - IRAN, TRUCIAL COAST

NASA Image and Video Library

1966-11-13

S66-63485 (13 Nov. 1966) --- Iran, Trucial Coast, Oman, Zagros Mountains, and Qishm Island (large island at lower left), as seen from the Gemini-12 spacecraft during its 25th revolution of Earth. Gulf of Oman is at lower left edge and the Persian Gulf is large body of water in upper half of photo. Photo credit: NASA

Paleomagnetism and tectonics of the Jura arcuate mountain belt in France and Switzerland

NASA Astrophysics Data System (ADS)

Gehring, Andreas U.; Keller, Peter; Heller, Friedrich

1991-02-01

Goethite and hematite in ferriferous oolitic beds of Callovian age from the Jura mountains (Switzerland, France) carry either pre- and/or post-tectonic magnetization. The frequent pre-tectonic origin of goethite magnetization indicates a temperature range during formation of the arcuate Jura mountain belt below the goethite Néel temperature of about 100°C. The scatter of the pre-tectonic paleomagnetic directions ( D = 11.5° E, I = 55.5°; α95 = 4.7) which reside both in goethite and hematite, provides strong evidence that the arcuate mountain belt was shaped without significant rotation. The paleomagnetic results support tectonic thin-skinned models for the formation of the Jura mountain belt.

Deformation and kinematic evolution of the subsurface structures: Zagros foreland fold-and-thrust belt, northern Dezful Embayment, Iran

NASA Astrophysics Data System (ADS)

Sarkarinejad, Khalil; Pash, Raana Razavi; Motamedi, Hossein; Yazdani, Mohammad

2018-06-01

The Dezful Embayment is located in the foreland part of the Zagros fold-and-thrust belt. Structural style of folding and thrusting vary in the Dezful Embayment. In this study, balanced cross sections and subsurface data including 2D seismic profiles and wells data decoded structural style of the subsurface structures in the northern Dezful Embayment. Presence of the multiple décollement horizons is the main controlling factor of the structural style in this area. The subsurface anticlines have been formed between two main décollement horizons, which include the Miocene Gachsaran Formation as upper decollement and Permian Dashtak evaporites and Lower Cretaceous Garau shales as the middle décollement horizons. Geometry of the subsurface anticlines differs much vertically and horizontally. Growth strata indicate folding is started in Middle Miocene time in this region. Anticlines formed as open, wide and disharmonic structures. Active processes in the evolution of anticlines are limb rotation and hinge migration, which was resulted in increase of inhomogeneous shortening rate. More shortening rate indicates more structural relief in anticlines. These anticlines are formed as a detachment folds in initiation and then during their evolution converted to fault propagation fold and fault-bend fold. Final geometric shape of these anticlines depends on the geometry of thrusts propagation that formed in the forelimb.

GT-12 - EARTH SKY - IRAN, TRUCIAL COAST

NASA Image and Video Library

1966-11-13

S66-63486 (13 Nov. 1966) --- Iran, Trucial Coast, Oman, Zagros Mountains, and Qishm Island (large island at lower right), as seen from the Gemini-12 spacecraft during its 25th revolution of Earth. Gulf of Oman is large body of water at left and the Persian Gulf is body of water at right. View is looking east. Photo credit: NASA

The Geology of the Persian Gulf-Gulf of Oman Region: A Synthesis (Paper 6R0118)

NASA Astrophysics Data System (ADS)

Ross, David A.; Uchupi, Elazar; White, Robert S.

1986-08-01

During the Mesozoic most of the Arabian Peninsula, Persian Gulf, south-western Iran, and eastern Iraq constituted the Arabian platform. Deformation of the Musandam Peninsula in the Late Cretaceous and mid-Tertiary by compression (subduction) from the east and southwest, collision of the Arabian platform and Eurasian plate along the Zagros Crush zone during the Oligocene or early Miocene, and emplacement of the Zagros Mountains by gravitational sliding during the Neogene and Pleistocene have reduced the platform area to the Persian Gulf. Other factors that contributed to the reduction of the Arabian platform include the uplift of the Arabian Peninsula during the opening of the Red Sea in the Tertiary, tectonism of the Infracambrian Hormuz salt, upwarp of the platform sediment cover by basement uplift and/or salt tectonics, and a 600- to 400-m drop in sea level since the Cretaceous. At present, tectonism in the region is restricted to the northern edge of the Gulf of Oman where the Arabian plate is subducting the Eurasian plate from the south and to the Zagros Crush zone where the Arabian and Eurasian plates are colliding with one another.

Modelling the Deformation Front of a Fold-Thrust Belt: the Effect of an Upper Detachment Horizon

NASA Astrophysics Data System (ADS)

Burberry, C. M.; Koyi, H.; Nilfouroushan, F.; Cosgrove, J. W.

2008-12-01

Structures found at the deformation fronts of fold-thrust belts are variable in type, geometry and spatial organisation, as can be demonstrated from comparisons between structures in the Zagros Fold-Thrust Belt, Iran and the Sawtooth Range, Montana. A range of influencing factors has been suggested to account for this variation, including the mechanical properties and distribution of any detachment horizons within the cover rock succession. A series of analogue models was designed to test this hypothesis, under conditions scaled to represent the Sawtooth Range, Montana. A brittle sand pack, containing an upper ductile layer with variable geometry, was shortened above a ductile base and the evolution of the deformation front was monitored throughout the deformation using a high-accuracy laser scanner. In none of the experiments did the upper detachment horizon cover the entire model. In experiments where it pinched out perpendicular to the shortening direction, a triangle zone was formed when the deformation front reached the pinch out. This situation is analogous to the Teton Canyon region structures in the Sawtooth Range, Montana, where the Cretaceous Colorado Shale unit pinches out at the deformation front, favouring the development of a triangle zone in this region. When the pinch out was oblique to the shortening direction, a more complex series of structures was formed. However, when shortening stopped before the detachment pinch out was reached, the deformation front structures were foreland-propagating and no triangle zone was observed. This situation is analogous to foreland-propagating thrust structures developed at the deformation front in the Swift Dam region of the Sawtooth Range, Montana and to the development of fault-bend folds at the deformation front of the Zagros Fold-Thrust Belt, Iran. We suggest that the presence of a suitable intermediate detachment horizon within a sediment pile can be invoked as a valid explanation for the development of varied deformation front structures in fold-thrust belts. Specifically, the spatial extent of the upper detachment horizon with respect to the spatial extent of the deformed region is a key influence on the development of deformation front structures. However, we acknowledge that factors such as basement structure and variable sedimentation within the foreland basin may also be key influences on deformation front structures in other fold-thrust belts.

Geology of Tenderfoot Creek Experimental Forest Little Belt Mountains, Meagher County, Montana

Treesearch

Mitchell W. Reynolds

1975-01-01

The Tenderfoot Creek Experimental Forest in the west-central part of the Little Belt Mountains occupies a transition zone in the west-central part of the Mountains-a transition from rolling mountain parks with rounded peaks that rise about 500 feet above the upland of the range to deeply incised canyons that drain the west end of the Mountains. The Experimental Forest...

Stratigraphic relations and U-Pb geochronology of the Upper Cretaceous upper McCoy Mountains Formation, southwestern Arizona

USGS Publications Warehouse

Tosdal, R.M.; Stone, P.

1994-01-01

A previously unrecognized angular unconformity divides the Jurassic and Cretaceous McCoy Mountains Formation into a lower and an upper unit in the Dome Rock Mountains and Livingston Hills of western Arizona. The intraformation unconformity in the McCoy Mountains Formation developed where rocks of the lower unit were deformed adjacent to the southern margin of the Maria fold and thrust belt. The upper unit of the formation is interpreted as a foreland-basin deposit that was shed southward from the actively rising and deforming fold and thrust belt. The apparent absence of an equivalent unconformity in the McCoy Mountains Formation in adjacent California is presumably a consequence of the observed westward divergence of the outcrop belt from the fold and thrust belt. Tectonic burial beneath the north-vergent Mule Mountains thrust system in the latest Late Cretaceous (~70 Ma) marked the end of Mesozoic contractile deformation in the area. -from Authors

Constraining the Uplift History of the Jabal Akhdar and Saih Hatat Culminations, Al Hajar Mountains, Oman, with Fission Track and (U-Th)/He Ages

NASA Astrophysics Data System (ADS)

Hansman, R. J.; Ring, U.; Thomson, S. N.; Den Brok, B.; Stübner, K.

2016-12-01

We constrain the timing of the enigmatic uplift history of the Al Hajar Mountains in Oman by apatite (U-Th)/He and fission-track (AHe and AFT), as well as zircon (U-Th)/He (ZHe) ages. Our data show differential cooling between the two major culminations of the mountain range, which are separated by the Semail gap, a major NNE-oriented depression in the Al Hajar Mountains. In the up to 3 km high Jabal Akhdar Culmination west of the Semail Gap AHe sample mean ages range between 35.5 ± 4.3 Ma and 23.9 ± 8.8 Ma (1σ errors), AFT ages range 51 ± 4 to 32 ± 2 Ma (1σ errors), and ZHe sample mean ages range 50.6 ± 16.7 to 46.1 ± 7.1 Ma (1σ errors). Whereas, in the Saih Hatat Culmination to the east AHe ages range from 23.6 ± 1.7 Ma to 15.7 ± 4.1 Ma, AFT ages range 73 ± 10 to 57 ± 4 Ma, and ZHe ages range 70.6 ± 10.8 Ma through to 58.8 ± 1.8 Ma. These data demonstrate that the uplift initiated at 45 Ma and had ceased by 15 Ma, climaxing between 40 to 35 Ma. In addition, U-Pb dating of calcite tectonics also supports N-S shortening at 40 to 35 Ma. We propose that the Semail gap is a west-dipping thrust, which uplifted the Jabal Akhdar Culmination in the hanging-wall but hardly affected the Saih Hatat Culmination in the footwall. During mountain uplift, the Al Hajar Mountains were located at least 600 km outboard of the current Eurasia-Arabia subduction/collision zone on the continental margin of the downgoing Arabian Plate. We therefore conclude that the uplift of the Al Hajar Mountains preceded the Zagros collisional event by at least 15 Myr and were not causally related to the Zagros collision and Makran subduction.

Valemount strain zone: A dextral oblique-slip thrust system linking the Rocky Mountain and Omineca belts of the southeastern Canadian Cordillera

NASA Astrophysics Data System (ADS)

McDonough, Michael R.; Simony, Philip S.

1989-03-01

The Valemount strain zone (VSZ), a narrow zone of high orogen-parallel (OP) strain in pebble conglomerate of the Late Proterozoic Miette Group, is the footwall expression of a thrust fault on the western edge of the Rocky Mountain belt, marking the eastern limit of a wide zone of OP fabrics distributed through the Omineca crystalline and western Rocky Mountain belts of the southeastern Canadian Cordillera. Kinematic indicators from the VSZ and the adjacent Bear Foot thrust zone show that both thrust and dextral displacement are associated with folding and thrust motion in the Rocky Mountains, thereby linking the southern Rocky Mountain belt to the Omineca belt by an oblique-slip thrust regime that is tectonically unrelated to the Southern Rocky Mountain Trench. Transverse shortening of thrust sheets and subsequent distribution of OP shear are invoked to explain the parallelism of stretching lineations and fold axes. Strain and kinematic data and the thrust-belt geometry of the VSZ suggest that OP lineations are a product of a large amount of transverse shortening during slightly oblique A-type subduction. Thus, OP lineations are not representative of relative plate motions between North America and accreted terranes, but probably are a function of footwall buttressing of thrust sheets, a mechanism that may be widely applicable to the internal zones of collisional orogens.

Palaeogeographical peculiarities of the Pabdeh Formation (Paleogene) in Iran: New evidence of global diversity-determined geological heritage

NASA Astrophysics Data System (ADS)

Habibi, Tahereh; Nielsen, Jan K.; Ponedelnik, Alena A.; Ruban, Dmitry A.

2017-11-01

Unique palaeogeographical peculiarities of sedimentary formations are important for geological heritage conservation and use for the purposes of tourism. The heritage value of the Pabdeh Formation (Paleocene-Oligocene) of the Zagros Fold-Thrust Belt in Iran has been investigated. The uniqueness of its palaeogeographical peculiarities has been assessed on the basis of the literature, field studies of three representative sections in the Fars Province (Kavar, Zanjiran, and Shahneshin sections), and comparison with the similar features known in Iran and globally. The Pabdeh Formation reflects the process of mixed siliciclastic-carbonate ramp progradation and the onset of a typical carbonate platform. The other unique features include representation of mesopelagic palaeohabitat, specific trace fossil assemblages, prehistoric bituminous artefacts (production of which was linked to the Pabdeh deposits), etc. It is established that the palaeogeographical type of geological heritage of the Pabdeh Formation is represented by all known subtypes, namely facies, palaeoecosystem, ichnological, taphonomical, event, and geoarchaeological subtypes. Their rank varies between regional and global. The very fact of co-occurrence of these subtypes determines the global importance of the entire palaeogeographical type in the case of this formation. The establishment of geopark in the Zagros Fold-Thrust Belt will facilitate adequate use of the Pabdeh Formation for the purpose of geotourism development. The aesthetic properties (rocks of different colour and striped patterns of outcrops) increase the attractiveness of this geological body to visitors.

Integration of spectral, spatial and morphometric data into lithological mapping: A comparison of different Machine Learning Algorithms in the Kurdistan Region, NE Iraq

NASA Astrophysics Data System (ADS)

Othman, Arsalan A.; Gloaguen, Richard

2017-09-01

Lithological mapping in mountainous regions is often impeded by limited accessibility due to relief. This study aims to evaluate (1) the performance of different supervised classification approaches using remote sensing data and (2) the use of additional information such as geomorphology. We exemplify the methodology in the Bardi-Zard area in NE Iraq, a part of the Zagros Fold - Thrust Belt, known for its chromite deposits. We highlighted the improvement of remote sensing geological classification by integrating geomorphic features and spatial information in the classification scheme. We performed a Maximum Likelihood (ML) classification method besides two Machine Learning Algorithms (MLA): Support Vector Machine (SVM) and Random Forest (RF) to allow the joint use of geomorphic features, Band Ratio (BR), Principal Component Analysis (PCA), spatial information (spatial coordinates) and multispectral data of the Advanced Space-borne Thermal Emission and Reflection radiometer (ASTER) satellite. The RF algorithm showed reliable results and discriminated serpentinite, talus and terrace deposits, red argillites with conglomerates and limestone, limy conglomerates and limestone conglomerates, tuffites interbedded with basic lavas, limestone and Metamorphosed limestone and reddish green shales. The best overall accuracy (∼80%) was achieved by Random Forest (RF) algorithms in the majority of the sixteen tested combination datasets.

[Analysis of vegetation spatial and temporal variations in Qinghai Province based on remote sensing].

PubMed

Wang, Li-wen; Wei, Ya-xing; Niu, Zheng

2008-06-01

1 km MODIS NDVI time series data combining with decision tree classification, supervised classification and unsupervised classification was used to classify land cover type of Qinghai Province into 14 classes. In our classification system, sparse grassland and sparse shrub were emphasized, and their spatial distribution locations were labeled. From digital elevation model (DEM) of Qinghai Province, five elevation belts were achieved, and we utilized geographic information system (GIS) software to analyze vegetation cover variation on different elevation belts. Our research result shows that vegetation cover in Qinghai Province has been improved in recent five years. Vegetation cover area increases from 370047 km2 in 2001 to 374576 km2 in 2006, and vegetation cover rate increases by 0.63%. Among five grade elevation belts, vegetation cover ratio of high mountain belt is the highest (67.92%). The area of middle density grassland in high mountain belt is the largest, of which area is 94 003 km2. Increased area of dense grassland in high mountain belt is the greatest (1280 km2). During five years, the biggest variation is the conversion from sparse grassland to middle density grassland in high mountain belt, of which area is 15931 km2.

Fold-and-thrust belt curvature in the Fars region, eastern Zagros, achieved by variable thrust slip vectors and fault block rotations

NASA Astrophysics Data System (ADS)

Edey, Alex; Allen, Mark B.

2017-04-01

Many fold-and-thrust belts are curved in plan view, but the origins of this curvature are debated. Understanding which mechanism(s) is appropriate is important to constrain the behaviour of the lithosphere during compressional deformation. Here we analyse the active deformation of the Fars Arc region in the eastern part of the Zagros, Iran, including slip vectors of 92 earthquakes, published GPS and palaeomagnetism data, and the distributions of young and/or active folds. The fold-and-thrust belt in the Fars Arc shows pronounced curvature, convex southwards. Folds trends vary from NW-SE in the west to ENE-WSW in the east. The GPS-derived velocity field shows NNE to SSW convergence, towards the foreland on the Arabian Plate, without dispersion. Earthquake slip vectors are highly variable, spanning a range of azimuths from SW to SSE in an Arabian Plate reference frame. The full variation of azimuths occurs within small (10s of km) sub-regions, but this variation is superimposed on a radial pattern, whereby slip vectors tend to be parallel to the regional topographic gradient. Given the lack of variation in the GPS vectors, we conclude that the Fars Arc is not curved as a result of gravitational spreading over the adjacent foreland, but as a result of deformation being restricted at tectonic boundaries at the eastern and western margins of the Arc. Fault blocks and folds within the Fars Arc, each 20-40 km long, rotate about vertical axes to achieve the overall curvature, predominantly clockwise in the west and counter-clockwise in the east. Active folds of different orientations may intersect and produce dome-and-basin interference patterns, without the need for a series of separate deformation phases of different stress orientations. The Fars Arc clearly contrasts with the Himalayas, where both GPS and earthquake slip vectors display radial patterns towards the foreland, and gravitational spreading is a viable mechanism for producing fold-and-thrust belt curvature.

Imaging Subsurface Structure of Central Zagros Zone/Iran Using Ambient Noise Tomography

NASA Astrophysics Data System (ADS)

Vahidravesh, Shaghayegh; Pakzad, Mehrdad, ,, Dr.; Hatami, Mohammad Reza, ,, Dr.

2017-04-01

The Central Zagros zone, of west Iran & east Iraq, is surrounded by many active faults (including Main Zagros Reversed Fault, Main Recent Fault, High Zagros Fault, Zagros Fold, & Thrust Belt). Recent studies show that cross-correlation of a long-term ambient seismic noise data recorded in station-pair, includes important information regarding empirical Green's functions (EGFs) between stations. Hence, ambient seismic noise carries valuable information of the wave propagation path (which can be extracted). The 2D model of surface waves (Rayleigh & Love) velocities for the studied area is obtained by seismic ambient noise tomography (ANT) method. Throughout this research, we use continuous records of all three vertical, radial, and tangential components (obtained by rotation) recorded by IRSC (Iranian Seismological Center) and IIEES (International Institute of Earthquake Engineering) networks for this area of interest. The IRSC & IIEES networks are equipped by SS-1 kinematics and Guralp CMG-3T sensors respectively. Data of 20 stations were used for 12 months from 2014/Nov. to 2015/Nov. The performed data processing is similar to the one, put into words in detail by Bensen et al. (2007) including the processed daily base data. Mean, trend, and instrument response were removed and the data were decimated to 5 sps (sample per second) to reduce the amount of storage space and computational time required. We then applied merge to handle data gaps. One-bit time-domain normalization was also applied to suppress the influence of instrument irregularities and earthquake signals followed by spectral (frequency-domain) normalization between 0.05-0.2 Hz (period 5-20 sec). After cross-correlation (processing step), we perform rms stacking (new approach of stacking) to stack many cross-correlation functions based on the highest energy in a time interval which we accordingly anticipate to receive Rayleigh & Love waves fundamental modes. To evaluate quality of the stacking process stability quantitatively, we calculate signal-to-noise ratio (SNR), defined as a ratio of the peak amplitude within a time window to the root-mean-square of noise trailing the signal arrival window (Bensen et al., 2007), for each cross-correlation. The cross-correlated time-series is equivalent to the Green's functions between pairs of receivers. We then apply multiple phase-matched filter method of Herrmann (2005) to measure the correct group velocity dispersion of the interferometric surface waves. Eventually, we apply fast marching surface wave tomography (FMST), the iterative nonlinear inversion package developed by Rawlinson, 2005, to extract the velocity model of shallow structure in Central Zagros zone /Iran.

Mechanical versus kinematical shortening reconstructions of the Zagros High Folded Zone (Kurdistan region of Iraq)

NASA Astrophysics Data System (ADS)

Frehner, Marcel; Reif, Daniel; Grasemann, Bernhard

2012-06-01

This paper compares kinematical and mechanical techniques for the palinspastic reconstruction of folded cross sections in collision orogens. The studied area and the reconstructed NE-SW trending, 55.5 km long cross section is located in the High Folded Zone of the Zagros fold-and-thrust belt in the Kurdistan region of Iraq. The present-day geometry of the cross section has been constructed from field as well as remote sensing data. In a first step, the structures and the stratigraphy are simplified and summarized in eight units trying to identify the main geometric and mechanical parameters. In a second step, the shortening is kinematically estimated using the dip domain method to 11%-15%. Then the same cross section is used in a numerical finite element model to perform dynamical unfolding simulations taking various rheological parameters into account. The main factor allowing for an efficient dynamic unfolding is the presence of interfacial slip conditions between the mechanically strong units. Other factors, such as Newtonian versus power law viscous rheology or the presence of a basement, affect the numerical simulations much less strongly. If interfacial slip is accounted for, fold amplitudes are reduced efficiently during the dynamical unfolding simulations, while welded layer interfaces lead to unrealistic shortening estimates. It is suggested that interfacial slip and decoupling of the deformation along detachment horizons is an important mechanical parameter that controlled the folding processes in the Zagros High Folded Zone.

Mechanical versus kinematical shortening reconstructions of the Zagros High Folded Zone (Kurdistan Region of Iraq)

NASA Astrophysics Data System (ADS)

Frehner, M.; Reif, D.; Grasemann, B.

2012-04-01

Our study compares kinematical and mechanical techniques for the palinspastic reconstruction of folded cross-sections in collision orogens. The studied area and the reconstructed NE-SW-trending, 55.5 km long cross-section is located in the High Folded Zone of the Zagros fold-and-thrust belt in the Kurdistan Region of Iraq. The present-day geometry of the cross-section has been constructed from field, as well as remote sensing data. In a first step, the structures and the stratigraphy are simplified and summarized in eight units trying to identify the main geometric and mechanical parameters. In a second step, the shortening is kinematically estimated using the dip-domain method to 11%-15%. Then the same cross-section is used in a numerical finite-element model to perform dynamical unfolding simulations taking various rheological parameters into account. The main factor allowing for an efficient dynamic unfolding is the presence of interfacial slip conditions between the mechanically strong units. Other factors, such as Newtonian vs. power-law viscous rheology or the presence of a basement affect the numerical simulations much less strongly. If interfacial slip is accounted for, fold amplitudes are reduced efficiently during the dynamical unfolding simulations, while welded layer interfaces lead to unrealistic shortening estimates. It is suggested that interfacial slip and decoupling of the deformation along detachment horizons is an important mechanical parameter that controlled the folding processes in the Zagros High Folded Zone.

Sink to survive: The persistence of ancient mountain belts through crustal density changes

NASA Astrophysics Data System (ADS)

Blackburn, T. J.; Ferrier, K.; Perron, J.

2012-12-01

Mountain belts form when collisions between continents thicken the Earth's crust, which buoyantly rises to remain in isostatic equilibrium with the underlying asthenosphere. Just as isostasy leads to the birth of mountain belts, it contributes to their destruction by responding to erosion with rock uplift, which in turn promotes further erosion. If the continental crust consisted of a single layer of constant density, erosion and isostatic rebound would continue thinning the crust until it was completely eroded. Such total destruction evidently does not happen, however, as the roots of Earth's oldest mountains have persisted for billions of years. One explanation for this preservation is that an orogen's isostatic response to erosion decreases over time as the crust increases in density as the lower crust undergoes metamorphic phase changes that accompany lithosphere cooling. The implication of this hypothesis is that erosion rates in mountain belts are linked to the thermal and density evolution of the lithosphere. We test this hypothesis with a global compilation of exhumation rates and erosion rates determined from published apatite fission track and cosmogenic 10Be measurements in collisional orogens ranging in formation age from 0 to 2 billion years. We compare these data to a numerical model of the thermal, density and erosional evolution of a decaying mountain belt. Measured and modeled data indicate that erosion is fastest in young, hot, low-density, and topographically high mountain belts, and that erosion rates decrease dramatically after 200-300 million years (My). This 200-300 My timescale is consistent with titanite U-Pb thermochronologic data from lower crustal xenoliths, which record cooling to temperatures consistent with garnet growth and crustal densification (~650 °C) within 200-300 My after orogenesis. For the same orogens, Sm-Nd and/or Lu-Hf garnet-whole rock isochron dates constrains lower crustal garnet growth and a corresponding crustal density increase to 200-450 My following orogenesis. Thus, geochronologic data at various timescales, from ancient thermal histories to geologically recent erosion rates, are consistent with an isostatic model that links the erosional decay of a collisional orogens to its thermal and density evolution. Given the geologic and climatic diversity of mountain ranges around the world, it is striking that their erosional histories are generally consistent with a single simple model. The scenario described here, in which young, hot, low-density orogens erode quickly for a few hundred My while older, colder, denser orogens erode much more slowly for billions of years provides an explanation for the persistence of some of Earth's oldest mountain belts. The importance of this erosional succession is underscored by the fact that continental landmasses are constructed through mountain building processes: like jigsaw puzzles with many pieces, continents are amalgamations of ancient mountain belts assembled over geologic time. Temperature-dependent densities appear to play a global role in the long-term evolution of mountain belts and continents, influencing the preservation of continental lithosphere over billions of years.

Reactivation versus reworking of the active continental margin during the Zagros collision: Mahallat-Muteh-Laybid complexes, Sanandaj-Sirjan zone, Iran

NASA Astrophysics Data System (ADS)

Aflaki, Mahtab; Shabanian, Esmaeil; Davoodi, Zeinab; Mohajjel, Mohammad

2017-06-01

Reactivation of long-lived basement faults has significant influences on further deformation of collision zones. Three major inherited pre-collisional NW-, N- and NE-trending basement discontinuities have played important roles on the structural and tectono-sedimentary evolution of the Iranian micro-continent in the northeastern part of the Gondwana super-continent. Sanandaj-Sirjan zone (SSZ), known as the metamorphic belt of the Zagros orogeny, marks the SW margin of the Central Iran. SSZ is formed as a result of the Arabia-Eurasia collision and its general trend of deformation coincides with the NW structural trend of the collision. The NE-trending Mahallat, Muteh and Laybid complexes in the middle part of the NW-trending SSZ are the exception and have a trend almost normal to the NW-trending Zagros. A combined methodology of remote sensing, geometric and kinematics analyses complemented by field work was used to reconstruct the history of deformation in the Zagros hinterland since the earlier stages of collision to the present-day. Our results reveal the key role of the preexisting discontinuities of the Iranian basement in both the kinematics and structural pattern of the middle part of the SSZ. These basement faults have acted as main boundary conditions changing the collisional fabric perpendicular to its overall trend. Progressive deformation and the related changes during collision have caused drastic changes in the kinematics of the boundary faults. The establishment of dextral transtension in the SSZ has had secondary influences on the pattern of deformation by local clockwise rotation and localized dextral shear in the southern parts of the area of interest. This study highlights the significance of long-lived pre-existing structures in the deformation of collision zones. Such basement faults are capable to change both the pattern and kinematics of deformation of the adjacent areas involved in a continental collision.

'Passive-roof' duplex geometry in the frontal structures of the Kirthar and Sulaiman mountain belts, Pakistan

NASA Astrophysics Data System (ADS)

Banks, C. J.; Warburton, J.

Exploration for hydrocarbons over the past few years has greatly improved our understanding of the geometry of frontal mountain belt structures. In this study we introduce and discuss the concept of the 'Passive-roof duplex', using as the main example the Kirthar and Sulaiman Ranges in the Baluchistan Province of Pakistan. Structures similar to those described here have been recognized previously in other mountain belts, and they appear to exist as a common feature in many more frontal regions of mountain belts. Our example of a Passive-roof duplex which we describe from Pakistan is compared briefly with similar structures reported by others. The Passive-roof duplex is here defined as a duplex whose roof thrust has backthrust sense ( Passive-roof thrust) and whose roof sequence (those rocks lying above the roof thrust) remains relatively 'stationary' during foreland directed piggy-back style propagation of horses within the duplex.

Comparing the response of birds and butterflies to vegetation-based mountain ecotones using boundary detection approaches.

PubMed

Kent, Rafi; Levanoni, Oded; Banker, Eran; Pe'er, Guy; Kark, Salit

2013-01-01

Mountains provide an opportunity to examine changes in biodiversity across environmental gradients and areas of transition (ecotones). Mountain ecotones separate vegetation belts. Here, we aimed to examine whether transition areas for birds and butterflies spatially correspond with ecotones between three previously described altitudinal vegetation belts on Mt. Hermon, northern Israel. These include the Mediterranean Maquis, xero-montane open forest and Tragacanthic mountain steppe vegetation belts. We sampled the abundance of bird and butterfly species in 34 sampling locations along an elevational gradient between 500 and 2200 m. We applied wombling, a boundary-detection technique, which detects rapid changes in a continuous variable, in order to locate the transition areas for bird and butterfly communities and compare the location of these areas with the location of vegetation belts as described in earlier studies of Mt. Hermon. We found some correspondence between the areas of transition of both bird and butterfly communities and the ecotones between vegetation belts. For birds and butterflies, important transitions occurred at the lower vegetation ecotone between Mediterranean maquis and the xero-montane open forest vegetation belts, and between the xero-montane open forest and the mountain steppe Tragacanthic belts. While patterns of species turnover with elevation were similar for birds and butterflies, the change in species richness and diversity with elevation differed substantially between the two taxa. Birds and butterflies responded quite similarly to the elevational gradient and to the shift between vegetation belts in terms of species turnover rates. While the mechanisms generating these patterns may differ, the resulting areas of peak turnover in species show correspondence among three different taxa (plants, birds and butterflies).

Structural profile reconstructions and thermal metamorphic evolution in the slate belt of southern Hsuehshan Range in the active Taiwan mountain belt

NASA Astrophysics Data System (ADS)

Wu, Yu; Chen, Chih-Tung; Lee, Jian-Cheng; Shyu, J. Bruce H.

2017-04-01

The fate of passive continental margin in collisional orogens is crucial in understanding tectonic evolution of mountain belts. The active arc-continent collision of Taiwan is considered as a model case in studying mountain building processes, and largely consists of deformed margin basement and cover series. Among the whole orogeny belt, the slate belt of the Hsuehshan Range (HR) is a prominent large-scale pop-up structural on the prowedge part of the orogen, and is composed of metamorphosed Eocene to Miocene sediments which experienced only the Neogene Taiwan orogeny after diagenesis in margin graben. Characterizing the metamorphic history of the HR is essential for reconstructing its geological evolution during the mountain building processes. However, previous studies were mostly focused on northern and central HR, structural investigation coupled with metamorphic documentation in the southern part of HR, which is the most active part of the orogeny belt, is therefore targeted in this work. Since carbonaceous material is common in pelitic protolith of HR slates, the Raman spectrum of carbonaceous material (RSCM) measuring the rock peak temperature is chosen for quantitative thermal metamorphic documentation. In this study, we reconstruct a geological structural profile in western central Taiwan across the prowedge part of the mountain belt containing the southern HR by combining the surface geological data, well log records and published seismic reflection profiles. Although most of the existing data are concentrated in the fold-and-thrust belt, they are now reinforced by new field structural measurements and RSCM samples in the southern HR. In total 27 RSCM samples were collected along 2 transects perpendicular to the average strike with a dense interval about 2 km. The results allow us to map peak temperature distribution across southern HR, and provide new constraints for structural profile reconstruction and reappraisal of the structural evolution of the HR and neighboring fold-and-thrust belt. As shown in the previous thermal metamorphic investigation, we expected that southern HR strata acquired highest temperature during its burial stage than the orogenic stage like their central HR counterparts, thus experiencing mostly retrograde metamorphism in the entire mountain building processes.

Detrital zircon U-Pb and (U-Th)/He double-dating of Upper Cretaceous-Cenozoic Zagros foreland basin strata in the Kurdistan Region of northern Iraq

NASA Astrophysics Data System (ADS)

Barber, D. E.; Stockli, D. F.; Koshnaw, R. I.; Horton, B. K.; Tamar-Agha, M. Y.; Kendall, J. J.

2014-12-01

The NW Zagros orogen is the result of the multistage collisional history associated with Late Cretaceous-Cenozoic convergence of the Arabian and Eurasian continents and final closure of Neotethys. Siliciclastic strata preserved within a ~400 km segment of the NW Zagros fold-thrust belt and foreland basin in the Iraqi Kurdistan Region (IKR) provide a widespread record of exhumation and sedimentation. As a means of assessing NW Zagros foreland basin evolution and chronostratigraphy, we present coupled detrital zircon (DZ) U-Pb and (U-Th)/He geo-thermochronometric data of Upper Cretaceous to Pliocene siliciclastic strata from the Duhok, Erbil, and Suleimaniyah provinces of IKR. LA-ICP-MS U-Pb age analyses reveal that the foreland basin fill in IKR in general was dominantly derived from Pan-African/Arabian-Nubian, Peri-Gondwandan, Eurasian, and Cretaceous volcanic arc terrenes. However, the provenance of these strata varies systematically along strike and through time, with an overall increase in complexity upsection. DZ age distribution of Paleocene-Eocene strata is dominated by a ~95 Ma grain age population, likely sourced from the Late Cretaceous Hassanbag-Bitlis volcanic arc complex along the northern margin of Arabia. In contrast, DZ U-Pb age distributions of Neogene strata show a major contribution derived from various Eurasian (e.g., Iranian, Tauride, Pontide; ~45, 150, 300 Ma) and Pan-African (~550, 950 Ma) sources. The introduction of Eurasian DZ ages at the Paleogene-Neogene transition likely records the onset of Arabian-Eurasian collision. Along strike to the southeast, the DZ U-Pb spectra of Neogene strata show a decreased percentage of Pan-African, Peri-Gondwandan, Tauride, and Ordovician ages, coupled with a dramatic increase in 40-50 Ma DZ ages that correspond to Urumieh-Dokhtar magmatic rocks in Iran. Combined with paleocurrent data, this suggests that Neogene sediments were transported longitudinally southeastward through an unbroken foreland basin system and progressively diluted downstream by detritus shed from the Iranian Plateau. Combined (U-Th)/He dating of DZ grains derived from the Hassanbag-Bitlis complex documents a major tectonothermal event at ~75 Ma, corresponding to the timing of proto-Zagros uplift and initial basin development in IKR.

IRANIAN FOREIGN POLICY AFTER THE NUCLEAR DEAL

DTIC Science & Technology

2016-02-16

studies from Kings College London (KCL). He worked in several staff positions and he is currently a student at the Air War College at Maxwell Air...the north, and the Persian Gulf, Gulf of Oman and Indian Ocean to the south. 1 Zagros and Alborz mountain ranges are located in the western and...perception. Persia fell under foreign occupation several times. The fall of the Persian Achaemenian dynasty to Alexander the Great in (330 B.C.) is

Ground Truth, Magnitude Calibration and Regional Phase Propagation and Detection in the Middle East and Horn of Africa

DTIC Science & Technology

2007-09-01

consists of late Proterozoic crystalline basement overlain by Tertiary and Quaternary volcanic rocks in some places. The breakup of the Arabian Plate from...with structure directly below the crust. To investigate upper mantle structure under the Arabian Shield, measured and inverted relative travel times...Plateau, Zagros Mountains, Arabian Peninsula, Turkish Plateau, Gulf of Aqaba, Dead Sea Rift) and the Horn of Africa (including the northern part of

Vertical climatic belts in the Tatra Mountains in the light of current climate change

NASA Astrophysics Data System (ADS)

Łupikasza, Ewa; Szypuła, Bartłomiej

2018-04-01

The paper discusses temporal changes in the configuration of vertical climatic belts in the Tatra Mountains as a result of current climate change. Meteorological stations are scarce in the Tatra Mountains; therefore, we modelled decadal air temperatures using existing data from 20 meteorological stations and the relationship between air temperature and altitude. Air temperature was modelled separately for northern and southern slopes and for convex and concave landforms. Decadal air temperatures were additionally used to delineate five climatic belts previously distinguished by Hess on the basis of threshold values of annual air temperature. The spatial extent and location of the borderline isotherms of 6, 4, 2, 0, and - 2 °C for four decades, including 1951-1960, 1981-1990, 1991-2000, and 2001-2010, were compared. Significant warming in the Tatra Mountains, uniform in the vertical profile, started at the beginning of the 1980s and led to clear changes in the extent and location of the vertical climatic belts delineated on the basis of annual air temperature. The uphill shift of the borderline isotherms was more prominent on southern than on northern slopes. The highest rate of changes in the extent of the climatic belts was found above the isotherm of 0 °C (moderately cold and cold belts). The cold belt dramatically diminished in extent over the research period.

Middle to late Cenozoic basin evolution in the western Alborz Mountains: Implications for the onset of collisional deformation in northern Iran

NASA Astrophysics Data System (ADS)

Guest, Bernard; Horton, Brian K.; Axen, Gary J.; Hassanzadeh, Jamshid; McIntosh, William C.

2007-12-01

Oligocene-Miocene strata preserved in synclinal outcrop belts of the western Alborz Mountains record the onset of Arabia-Eurasia collision-related deformation in northern Iran. Two stratigraphic intervals, informally named the Gand Ab and Narijan units, represent a former basin system that existed in the Alborz. The Gand Ab unit is composed of marine lagoonal mudstones, fluvial and alluvial-fan clastic rocks, fossiliferous Rupelian to Burdigalian marine carbonates, and basalt flows yielding 40Ar/39Ar ages of 32.7 ± 0.3 and 32.9 ± 0.2 Ma. The Gand Ab unit is correlated with the Oligocene-lower Miocene Qom Formation of central Iran and is considered a product of thermal subsidence following Eocene extension. The Narijan unit unconformably overlies the Gand Ab unit and is composed of fluvial-lacustrine and alluvial fan sediments exhibiting contractional growth strata. We correlate the Narijan unit with the middle to upper Miocene Upper Red Formation of central Iran on the basis of lithofacies similarities, stratigraphic position, and an 8.74 ± 0.15 Ma microdiorite dike (40Ar/39Ar) that intruded the basal strata. Deformation timing is constrained by crosscutting relationships and independent thermochronological data. The Parachan thrust system along the eastern edge of the ancestral Taleghan-Alamut basin is cut by dikes dated at 8.74 ± 0.15 Ma to 6.68 ± 0.07 Ma (40Ar/39Ar). Subhorizontal gravels that unconformably overlie tightly folded and faulted Narijan strata are capped by 2.86 ± 0.83 Ma (40Ar/39Ar) andesitic lava flows. These relationships suggest that Alborz deformation had migrated southward into the Taleghan-Alamut basin by late Miocene time and shifted to its present location along the active range front by late Pliocene time. Data presented here demonstrate that shortening in the western Alborz Mountains had started by late middle Miocene time. This estimate is consistent with recent thermochronological results that place the onset of rapid exhumation in the western Alborz at ˜12 Ma. Moreover, nearly synchronous Miocene contraction in the Alborz, Zagros Mountains, Turkish-Iranian plateau, and Anatolia suggests that the Arabia-Eurasia collision affected a large region simultaneously, without a systematic outward progression of mountain building away from the collision zone.

Analysis of the summertime buildup of tropospheric ozone abundances over the Middle East and North Africa as observed by the Tropospheric Emission Spectrometer instrument

NASA Astrophysics Data System (ADS)

Liu, Jane J.; Jones, Dylan B. A.; Worden, John R.; Noone, David; Parrington, Mark; Kar, Jay

2009-03-01

We use the GEOS-Chem chemical transport model to interpret observations of tropospheric ozone from the Tropospheric Emission Spectrometer (TES) satellite instrument in summer 2005. Observations from TES reveal elevated ozone in the middle troposphere (500-400 hPa) across North Africa and the Middle East. Observed ozone abundances in the middle troposphere are at a maximum in summer and a minimum in winter, consistent with the previously predicted summertime "Middle East ozone maximum." This summertime enhancement in ozone is associated with the Arabian and Sahara anticyclones, centered over the Zagros and Atlas Mountains, respectively. These anticyclones isolate the middle troposphere over northeast Africa and the Middle East, with westerlies to the north and easterlies to the south, facilitating the buildup of ozone. Over the Middle East, we find that in situ production and transport from Asia provides comparable contributions of 30-35% to the ozone buildup. Over North Africa, in situ production is dominant (at about 20%), with transport from Asia, North America, and equatorial Africa each contributing about 10-15% to the total ozone. We find that although the eastern Mediterranean is characterized by strong descent in the middle and upper troposphere in summer, transport from the boundary layer accounts for about 25% of the local Middle Eastern contribution to the ozone enhancement in the middle troposphere. This upward transport of boundary layer air is associated with orographic lifting along the Zagros Mountains in Iran and the Asir and Hijaz Mountain ranges in Saudi Arabia, and is consistent with TES observations of deuterated water.

Lithospheric Response of the Anatolian Plateau in the Realm of the Black Sea and the Eastern Mediterranean

NASA Astrophysics Data System (ADS)

Ergun, Mustafa

2016-04-01

The Eastern Mediterranean and the Middle East make up the southern boundary of the Tethys Ocean for the last 200 Ma by the disintegration of the Pangaea and closure of the Tethys Ocean. It covers the structures: Hellenic and Cyprus arcs; Eastern Anatolian Fault Zone; Bitlis Suture Zone and Zagros Mountains. The northern boundary of the Tethys Ocean is made up the Black Sea and the Caspian Sea, and it extends up to Po valley towards the west (Pontides, Caucasus). Between these two zones the Alp-Himalayan orogenic belt is situated where the Balkan, Anatolia and the Iran plateaus are placed as the remnants of the lost Ocean of the Tethys. The active tectonics of the eastern Mediterranean is the consequences of the convergence between the Africa, Arabian plates in the south and the Eurasian plate in the north. These plates act as converging jaws of vise forming a crustal mosaic in between. The active crustal deformation pattern reveals two N-S trending maximum compression or crustal shortening syntaxes': (i) the eastern Black Sea and the Arabian plate, (ii) the western Black Sea and the Isparta Angle. The transition in young mountain belts, from ocean crust through the agglomeration of arc systems with long histories of oceanic closures, to a continental hinterland is well exemplified by the plate margin in the eastern Mediterranean. The boundary between the African plate and the Aegean/Anatolian microplate is in the process of transition from subduction to collision along the Cyprus Arc. Since the Black Sea has oceanic lithosphere, it is actually a separate plate. However it can be considered as a block, because the Black Sea is a trapped oceanic basin that cannot move freely within the Eurasian Plate. Lying towards the northern margin of orogenic belts related to the closure of the Tethys Ocean, it is generally considered to be a result of back-arc extension associated with the northward subduction of the Tethyan plate to the south. Interface oceanic lithosphere at the leading edge of the northward moving African Plate in the eastern Mediterranean Sea and the deforming Aegean-Anatolian Plate continental lithosphere forms the northward dipping Hellenic and Cyprean subduction zones in the south. Since there is a velocity differential between the northward motion of African and Arabian Plates (10 mm/yr and 18 mm/yr, respectively), this difference is accommodated along the sinistral strike-slip Dead Sea Fault that forms the plate boundary between the African and the Arabian Plates. Continental crust forms from structurally thickened remnants of oceanic crust and overlying sediments, which are then invaded by arc magmatism. Understanding this process is a first order problem of lithospheric dynamics. The transition in young mountain belts, from ocean crust through the agglomeration of arc systems with long histories of oceanic closures, to a continental hinterland is well exemplified by the plate margin in the eastern Mediterranean. Mountains are subject to erosion, which can disturb isostatic compensation. If the eroded mountains are no longer high enough to justify their deep root-zones, the topography is isostatically overcompensated. Similarly, the buoyancy forces that result from overcompensation of mountainous topography cause vertical uplift. The Eastern Mediterranean Basin, having 100 milligal gravity values lower than other isostatically compensated oceans, it is in general overcompensated. Normally the Eastern Mediterranean Basin should rise under its present isostatic condition. It is known, however, that the Eastern Mediterranean Basin with its thick sediment-filled basins is actually sinking. Anatolia, having 100 milligals gravity values higher than other isostatically compensated zones of the world, is in general undercompensated. Normal isostatic conditions require that Anatolia should sink. It is known, however, that Anatolia, with the exception of local grabens, is rising. While the Black Sea, having 100-milligal lower gravity value than other isostatically compensated oceans, it is in general overcompensated and The Black Sea basin with very thick sedimentary cover (more than 12-14 km thick) is actually sinking.

Is the ecological belt zonation of the Swiss Alps relevant for moth diversity and turnover?

NASA Astrophysics Data System (ADS)

Beck, Jan; Rüdlinger, Cecil M.; McCain, Christy M.

2017-04-01

Mountain ecosystems are traditionally envisioned as elevational belts of homogenous vegetation, separated by intervening ecotones. Recent research has cast doubt on such predictable layering at least in animal communities. We test the link of two a priori defined ecological belt zonations to noctuid moth distributions in the Swiss Alps. Predictions, in particular, were a coincidence of proposed ecotones with increased range endpoint frequencies and with increased species turnover or species richness between equidistant elevational bands. Using >320,000 distributional records for >500 noctuid species, we found no support for these three predictions despite several contrasting analytical approaches. Concurrent with recently published vertebrate data, we conclude that simple ecological belt zonations are unrelated to the moth communities found along mountain slopes. Rather, species are distributed idiosyncratically following their specific niche requirements. Additional rigorous evidence, particularly comparing insect clades spanning a spectrum of host-plant relationships, may be required to support the relevance of the ecological belt concept in structuring mountain ecosystems beyond tree and plant communities.

2-D Density and Directional Analysis of Fault Systems in the Zagros Region (Iran) on a Regional Scale

NASA Astrophysics Data System (ADS)

Hashemi, Seyed Naser; Baizidi, Chavare

2018-04-01

In this paper, 2-D spatial variation of the frequency and length density and frequency-length relation of large-scale faults in the Zagros region (Iran), as a typical fold-and-thrust belt, were examined. Moreover, the directional analysis of these faults as well as the scale dependence of the orientations was studied. For this purpose, a number of about 8000 faults with L ≥ 1.0 km were extracted from the geological maps covering the region, and then, the data sets were analyzed. The overall pattern of the frequency/length distribution of the total faults of the region acceptably fits with a power-law relation with exponent 1.40, with an obvious change in the gradient in L = 12.0 km. In addition, maps showing the spatial variation of fault densities over the region indicate that the maximum values of the frequency and length density of the faults are attributed to the northeastern part of the region and parallel to the suture zone, respectively, and the fault density increases towards the central parts of the belt. Moreover, the directional analysis of the fault trends gives a dominant preferred orientation trend of 300°-330° and the assessment of the scale dependence of the fault directions demonstrates that larger faults show higher degrees of preferred orientations. As a result, it is concluded that the evolutionary path of the faulting process in this region can be explained by increasing the number of faults rather than the growth in the fault lengths and also it seems that the regional-scale faults in this region are generated by a nearly steady-state tectonic stress regime.

Crustal Structure of the Middle East from Regional Seismic Studies

NASA Astrophysics Data System (ADS)

Gritto, Roland; Sibol, Matthew; Caron, Pierre; Ghalib, Hafidh; Chen, Youlin

2010-05-01

We present results of crustal studies obtained with seismic data from the Northern Iraq Seismic Network (NISN). NISN has operated ten broadband stations in north-eastern Iraq since late 2005. This network was supplemented by the five-element broadband Iraq Seismic Array (KSIRS) in 2007. More recently, the former Iraq Seismic Network (ISN), destroyed during the war with Iran, was reestablished with the deployment of six broadband stations throughout Iraq. The aim of the present study is to derive models of the local and regional crustal structure of the Middle East, including Eastern Turkey, Iraq and Iran. To achieve this goal, we derive crustal velocity models using receiver function, surface wave and body wave analyses. These refined velocity models will eventually be used to obtain accurate hypocenter locations and event focal mechanisms. Our analysis of preliminary hypocenter locations produced a clearer picture of the seismicity associated with the tectonics of the region. The largest seismicity rate is confined to the active northern section of the Zagros thrust zone, while it decreases towards the southern end, before the intensity increases in the Bandar Abbas region again. Additionally, the rift zones in the Red Sea and the Gulf of Aden are clearly demarked by high seismicity rates. Surface wave velocity analysis resulted in a clear demarcation of the tectonic features in the region. The Arabian shield, Zagros thrust zone and the Red Sea are apparent through distinct velocity distributions separating them from each other. Furthermore, the shear wave velocity of the crust in North Iraq appears to be 10% higher than that of the Iranian plateau. The velocity anomaly of the Zagros mountains appears to be present into the upper mantle beyond the resolving limit of our model. Analysis of waveform data for obstructed pathways indicates clear propagation paths from the west or south-west across the Arabian shield as well as from the north and east into NISN. Phases including Pn, Pg, Sn, Lg, as well as LR are clearly observed on these seismograms. In contrast, blockage or attenuation of Pg and Sg-wave energy is observed for propagation paths across the Zagros-Makran zone from the south, while Pn and Sn phases are not affected. These findings are in support of earlier tectonic models that suggested the existence of multiple parallel listric faults splitting off the main Zagros fault zone in westerly direction. These faults appear to attenuate the crustal phases while the refracted phases, propagating across the mantle lid, remain unaffected. Azimuthal phase count and velocity analyses of body waves support the findings of blockage by the Zagros-Makran zone as well as higher shear wave velocities for the crust in Northern Iraq. In combination with receiver function and refraction studies, our first structural model of the crust beneath north-eastern Iraq indicates crustal depth of 40-45 km for the foothills, which increases to 45-50 km below the core of the Zagros-Bitlis zone.

Late Eocene Inversion and Exhumation of the Sivas Basin (Central Anatolia) Based On Low-Temperature Thermochronometry: Implications for Diachronous Initiation of Arabia-Eurasia Collision

NASA Astrophysics Data System (ADS)

Darin, M. H.; Umhoefer, P. J.; Thomson, S. N.; Schleiffarth, W. K.

2017-12-01

The timing of initial Arabia-Eurasia collision along the Bitlis-Zagros suture is controversial, with widely varying estimates from middle Eocene to late Miocene ( 45-10 Ma). The Cenozoic Sivas Basin (central Anatolia) preserves a detailed record of the initial stages of Arabia collision directly north of the suture in the Eurasian foreland. New apatite fission track and (U-Th)/He thermochronology data from Late Cretaceous to Paleogene units indicate rapid basin inversion and initiation of the north-vergent Southern Sivas Fold and Thrust Belt (SSFTB) during the late Eocene to early Oligocene ( 40-30 Ma), consistent with the age of a basin-wide unconformity and switch from marine to nonmarine sedimentation. We interpret late Eocene exhumation and the predominantly north-vergent kinematics of the SSFTB to reflect northward propagation of contraction into the Sivas retro-foreland basin due to initial collision of the Arabian passive margin with the Anatolide-Tauride block along the southern Eurasian margin during the late middle Eocene. We test this hypothesis by comparing our new results with regional-scale compilations of both published thermochronology and geochronology data from the entire Arabia-Eurasia collision zone. Low-temperature thermochronology data from eastern Anatolia, the Caucasus, Zagros, and Alborz demonstrate that rapid cooling and intraplate deformation occurred across much of the Eurasian foreland during the middle Eocene to early Oligocene ( 45-30 Ma). Our regional compilation of published geochronology data from central and eastern Anatolia reveals a distinct magmatic lull during the latest Eocene, Oligocene, and earliest Miocene (ca. 38-20 Ma), slightly earlier than a diachronous magmatic lull initiating at 25-5 Ma from northwest to southeast in Iran (Chiu et al., 2013). These results support a tectonic model for diachronous collision in which initial collision of the Arabia promontory occurred in central-eastern Anatolia during the middle-late Eocene ( 45-35 Ma) followed by magmatic quiescence due to subduction termination. Collisional strain transferred into the Caucasus, Alborz, and northwestern Zagros by the late Eocene to early Oligocene and became progressively younger towards the southeast along the Zagros suture from the late Oligocene to late Miocene.

A Model Simulation of Mountain Waves in the Middle Atmosphere and Its Comparison with Microwave Limb Sounder Observations

NASA Astrophysics Data System (ADS)

Jiang, J. H.; Eckermann, S. D.; Wu, D. L.; Ma, J.; Wang, D. Y.

2003-04-01

Topography-related wintertime stratospheric gravity waves in both Northern and Southern Hemisphere are simulated using the Naval Research Laboratory Mountain Wave Forecast Model (MWFM). The results agree well with the observations from Upper Atmospheric Research Satellite Microwave Limb Sounder (MLS). Both the MWFM simulation and MLS observations found strong wave activities over the high-latitude mountain ridges of Scandinavia, Central Eurasia, Alaska, southern Greenland in Northern Hemisphere, and Andes, New Zealand, Antarctic rim in Southern Hemisphere. These mountain waves are dominated by wave modes with downward phase progression and horizontal phase velocities opposite to the stratospheric jet-stream. Agreements of minor wave activities are also found at low- to mid-latitudes over Zagros Mountains of Middle East, Colorado Rocky Mountains, Appalachians, and Sierra Madres of Central America. Some differences between the MWFM results and MLS data are explained by different horizontal resolution between the model and observation, and the fact that MLS may also see the non-orographic wave sources, such as mesoscale storms and jet-stream instabilities. The findings from this model-measurement comparison study demonstrate that satellite instruments such as MLS can provide global data needed to characterize mountain wave sources, their inter-annual variations, and to improve gravity wave parameterizations in global climate and forecast models.

Quantitative Comparison of Mountain Belt Topographic Profiles on Earth and Venus

NASA Astrophysics Data System (ADS)

Stoddard, P. R.; Jurdy, D. M.

2016-12-01

Earth's mountain belts result from interactions between tectonic plates. Several styles of belts reflect the differing nature of those interactions: The narrow spine of the Andes results from subduction of the oceanic Nazca plate under the continental South American plate, the soaring Himalayas from the collision of India and Asia, the broad Rockies and Alaskan cordillera from multiple collisions, and the gentle Appalachians and Urals are remnants from ancient collisions. Venus' mountain chains - Maxwell, Freyja, Akna and Danu - surround Lakshmi Planum, a highland with an elevation of 4 km. These make up Ishtar Terra. Maxwell Montes ascends to over 11 km, the highest elevation on the planet. Freyja rises just over 7 km and Akna to about 6 km. The arcuate Danu belt on Ishtar's western boundary comes up to only 1.5 km over the planum. No other mountain belts exist on Venus. The origins of these venusian orogenic belts remain unknown. Earliest explanations invoked subduction around Lakshmi Planum; subsequent models included either up- or down-welling of the mantle, horizontal convergence, or crustal thickening. We quantitatively compare topography of Venus' mountain chains with Earth's for similarities and differences. Patterns may provide clues to the dynamics forming venusian orogenic belts. To do this, we find topographic profiles across the various chains, determine average profiles for each, and then correlate averages to establish the degree of similarity. From this correlation we construct a covariance matrix, diagonalized for eigenvalues, or principal components. These can be displayed as profiles. Correlations and principal components allow us to assess the degree of similarity and variability of the shapes of the average profiles. These analyses thus offer independent and objective modes of comparison; for example, with respect to terrestrial mid-ocean ridges, some Venus chasmata were shown to most closely resemble the ultra-slow Arctic spreading center.

A new species of Hemidactylus (Squamata: Gekkota: Gekkonidae)  from Qara Dagh Mountains, Kurdistan Region, with a key to the genus in Iraq.

PubMed

Safaei-Mahroo, Barbod; Ghaffari, Hanyeh; Ghafoor, Aram; Amini, Saywan

2017-12-12

We describe a new species of gecko of the genus Hemidactylus from the oak woodlands of Zagros Forest Steppe of Qara Dagh Mountains, Sulaimani, northeastern Iraq, based on morphological and molecular characteristics. Hemidactylus kurdicus sp. nov. is distinguished from all other related Arid clade Hemidactylus species in the Middle East by having a single pair of postmental scales; it differs H. turcicus, H. robustus, H. ulii, H. sinaitus, H. shihraensis and H. yerburii based on the number of lamellae under the first and fourth toes of pes. Mitochondrial DNA including CytB and 12S identify a consistent divergence between H. kurdicus and H. persicus. An identification key to the genus Hemidactylus in Iraq is presented.

The Crust and Upper Mantle Structure of the Iranian Plateau from Joint Waveform Tomography Imaging of Body and Surface Waves

NASA Astrophysics Data System (ADS)

Roecker, S. W.; Priestley, K. F.; Tatar, M.

2014-12-01

The Iranian Plateau forms a broad zone of deformation between the colliding Arabian and Eurasian plates. The convergence is accommodated in the Zagros Mountains of SW Iran, the Alborz Mountains of northern Iran, and the Kopeh Dagh Mountains of NE Iran. These deforming belts are separated by relatively aseismic depressions such as the Lut Block. It has been suggested that the Arabia-Eurasia collision is similar to the Indo-Eurasia collision but at a early point of development and therefore, it may provide clues to our understanding of the earlier stages of the continent-continent collision process. We present results of the analysis of seismic data collected along two NE-SW trending transects across the Iranian Plateau. The first profile extends from near Bushere on the Persian Gulf coast to near to the Iran-Turkmenistan border north of Mashad, and consists of seismic recordings along the SW portion of the line in 2000-2001 and recording along the NE portion of the line in 2003 and 2006-2008. The second profile extends from near the Iran-Iraq border near the Dezfel embayment to the south Caspian Sea coast north of Tehran. We apply the combined 2.5D finite element waveform tomography algorithm of Baker and Roecker [2014] to jointly invert teleseismic body and surface waves to determine the elastic wavespeed structures of these areas. The joint inversion of these different types of waves affords similar types of advantages that are common to combined surface wave dispersion/receiver function inversions in compensating for intrinsic weaknesses in horizontal and vertical resolution capabilities. We compare results recovered from a finite difference approach to document the effects of various assumptions related to their application, such as the inclusion of topography, on the models recovered. We also apply several different inverse methods, starting with simple gradient techniques to the more sophisticated pseudo-Hessian or L-BFGS approach, and find that the latter are generally more robust. Modeling of receiver functions and surface wave dispersion prior to the analysis is shown to be an efficacious way to generate starting models for this analysis.

Spatial evolution of Zagros collision zone in Kurdistan, NW Iran: constraints on Arabia-Eurasia oblique convergence

NASA Astrophysics Data System (ADS)

Sadeghi, Shahriar; Yassaghi, Ali

2016-04-01

Stratigraphy, detailed structural mapping and a crustal-scale cross section across the NW Zagros collision zone provide constraints on the spatial evolution of oblique convergence of the Arabian and Eurasian plates since the Late Cretaceous. The Zagros collision zone in NW Iran consists of the internal Sanandaj-Sirjan, Gaveh Rud and Ophiolite zones and the external Bisotoun, Radiolarite and High Zagros zones. The Main Zagros Thrust is the major structure of the Zagros suture zone. Two stages of oblique deformation are recognized in the external part of the NW Zagros in Iran. In the early stage, coexisting dextral strike-slip and reverse dominated domains in the Radiolarite zone developed in response to deformation partitioning due to oblique convergence. Dextral-reverse faults in the Bisotoun zone are also compatible with oblique convergence. In the late stage, deformation partitioning occurred during southeastward propagation of the Zagros orogeny towards its foreland resulting in synchronous development of orogen-parallel strike-slip and thrust faults. It is proposed that the first stage was related to Late Cretaceous oblique obduction, while the second stage resulted from Cenozoic collision. The Cenozoic orogen-parallel strike-slip component of Zagros oblique convergence is not confined to the Zagros suture zone (Main Recent Fault) but also occurred in the external part (Marekhil-Ravansar fault system). Thus, it is proposed that oblique convergence of Arabian and Eurasian plates in Zagros collision zone initiated with oblique obduction in the Late Cretaceous followed by oblique collision in the late Tertiary, consistent with global plate reconstructions.

Mechanical restoration of large-scale folded multilayers using the finite element method: Application to the Zagros Simply Folded Belt, N-Iraq

NASA Astrophysics Data System (ADS)

Frehner, Marcel; Reif, Daniel; Grasemann, Bernhard

2010-05-01

There are a large number of numerical finite element studies concerned with modeling the evolution of folded geological layers through time. This body of research includes many aspects of folding and many different approaches, such as two- and three-dimensional studies, single-layer folding, detachment folding, development of chevron folds, Newtonian, power-law viscous and more complex rheologies, influence of anisotropy, pure-shear, simple-shear and other boundary conditions and so forth. In recent years, studies of multilayer folding emerged, thanks to more advanced mesh generator software and increased computational power. Common to all of these studies is the fact that they consider a forward directed time evolution, as in nature. Very few studies use the finite element method for reverse-time simulations. In such studies, folded geological layers are taken as initial conditions for the numerical simulation. The folding process is reversed by changing the signs of the boundary conditions that supposedly drove the folding process. In such studies, the geometry of the geological layers before the folding process is searched and the amount of shortening necessary for the final folded geometry can be calculated. In contrast to a kinematic or geometric fold restoration procedure, the described approach takes the mechanical behavior of the geological layers into account, such as rheology and the relative strength of the individual layers. This approach is therefore called mechanical restoration of folds. In this study, the concept of mechanical restoration is applied to a two-dimensional 50km long NE-SW-cross-section through the Zagros Simply Folded Belt in Iraqi Kurdistan, NE from the city of Erbil. The Simply Folded Belt is dominated by gentle to open folding and faults are either absent or record only minor offset. Therefore, this region is ideal for testing the concept of mechanical restoration. The profile used is constructed from structural field measurements and digital elevation models using the dip-domain method for balancing the cross-section. The lithology consists of Cretaceous to Cenozoic sediments. Massive carbonate rock units act as the competent layers compared to the incompetent behavior of siltstone, claystone and marl layers. We show the first results of the mechanical restoration of the Zagros cross-section and we discuss advantages and disadvantages, as well as some technical aspects of the applied method. First results indicate that a shortening of at least 50% was necessary to create the present-day folded cross-section. This value is higher than estimates of the amount of shortening solely based on kinematic or geometric restoration. One particular problem that is discussed is the presence of (unnaturally) sharp edges in a balanced cross-section produced using the dip-domain method, which need to be eliminated for mechanical restoration calculations to get reasonable results.

Vascular flora of the Tenderfoot Creek Experimental Forest, Little Belt Mountains, Montana

Treesearch

Scott A. Mincemoyer; Jennifer L. Birdsall

2006-01-01

Tenderfoot Creek Experimental Forest (TCEF) is situated in the Little Belt Mountains of Montana, 120 km east of the Continental Divide. TCEF is composed of 3693 ha at elevations between 1840 and 2420 m and is dominated by lodgepole pine forest, which covers about 3366 ha, with interspersed floristically rich meadows. Our floristic inventory is based on collections and...

Microendemicity in the northern Hajar Mountains of Oman and the United Arab Emirates with the description of two new species of geckos of the genus Asaccus (Squamata: Phyllodactylidae)

PubMed Central

Jayasinghe, Sithum; Wilms, Thomas; Els, Johannes

2016-01-01

Background The Hajar Mountains of Oman and the United Arab Emirates (UAE) is the highest mountain range in Eastern Arabia. As a result of their old geological origin, geographical isolation, complex topography and local climate, these mountains provide an important refuge for endemic and relict species of plants and animals with strong Indo-Iranian affinities. Among vertebrates, the rock climbing nocturnal geckos of the genus Asaccus represent the genus with the highest number of endemic species in the Hajar Mountains. Recent taxonomic studies on the Zagros populations of Asaccus have shown that this genus is much richer than it was previously thought and preliminary morphological and molecular data suggest that its diversity in Arabia may also be underestimated. Methods A total of 83 specimens originally classified as Asaccus caudivolvulus (including specimens of the two new species described herein), six other Asaccus species from the Hajar and the Zagros Mountains and two representatives of the genus Haemodracon were sequenced for up to 2,311 base pairs including the mitochondrial 12S and cytb and the nuclear c-mos, MC1R and ACM4 genes. Phylogenetic relationships were inferred using both Bayesian and maximum-likelihood approaches and the former method was also used to calibrate the phylogenetic tree. Haplotype networks and phylogenetic trees were inferred from the phased nuclear genes only. Sixty-one alcohol-preserved adult specimens originally classified as Asaccus caudivolvulus from the northern Hajar Mountains were examined for 13 morphometric and the five meristic variables using multivariate methods and were also used to diagnose and describe the two new species. Results The results of the molecular and morphological analyses indicate that the species originally classified as Asaccus caudivolvulus is, in fact, an assemblage of three different species that started diversifying during the Mid-Miocene. The molecular phylogenies consistently recovered the Hajar endemic A. montanus as sister taxon to all the other Asaccus species included in the analyses, rendering the Arabian species of Asaccus polyphyletic. Discussion Using this integrative approach we have uncovered a very old diversification event that has resulted in a case of microendemicity, where three morphologically and ecologically similar medium-sized lizard species coexist in a very short and narrow mountain stretch. Asaccus caudivolvulus is restricted to a small coastal area of the UAE and at risk from heavy development, while the two new species described herein are widely distributed across the northern tip of the Hajar Mountains and seem to segregate in altitude when found in close proximity in the Musandam Peninsula (Oman). Similarly to other integrative analyses of Hajar reptiles, this study highlights the high level of diversity and endemicity of this arid mountain range, underscoring its status as one of the top hotspots of reptile diversity in Arabia. PMID:27602305

A remote sensing study of active folding and faulting in southern Kerman province, S.E. Iran

NASA Astrophysics Data System (ADS)

Walker, Richard Thomas

2006-04-01

Geomorphological observations reveal a major oblique fold-and-thrust belt in Kerman province, S.E. Iran. The active faults appear to link the Sabzevaran right-lateral strike-slip fault in southeast Iran to other strike-slip faults within the interior of the country and may provide the means of distributing right-lateral shear between the Zagros and Makran mountains over a wider region of central Iran. The Rafsanjan fault is manifest at the Earth's surface as right-lateral strike-slip fault scarps and folding in alluvial sediments. Height changes across the anticlines, and widespread incision of rivers, are likely to result from hanging-wall uplift above thrust faults at depth. Scarps in recent alluvium along the northern margins of the folds suggest that the thrusts reach the surface and are active at the present-day. The observations from Rafsanjan are used to identify similar late Quaternary faulting elsewhere in Kerman province near the towns of Mahan and Rayen. No instrumentally recorded destructive earthquakes have occurred in the study region and only one historical earthquake (Lalehzar, 1923) is recorded. In addition GPS studies show that present-day rates of deformation are low. However, fault structures in southern Kerman province do appear to be active in the late Quaternary and may be capable of producing destructive earthquakes in the future. This study shows how widely available remote sensing data can be used to provide information on the distribution of active faulting across large areas of deformation.

Comparison of Different Machine Learning Algorithms for Lithological Mapping Using Remote Sensing Data and Morphological Features: A Case Study in Kurdistan Region, NE Iraq

NASA Astrophysics Data System (ADS)

Othman, Arsalan; Gloaguen, Richard

2015-04-01

Topographic effects and complex vegetation cover hinder lithology classification in mountain regions based not only in field, but also in reflectance remote sensing data. The area of interest "Bardi-Zard" is located in the NE of Iraq. It is part of the Zagros orogenic belt, where seven lithological units outcrop and is known for its chromite deposit. The aim of this study is to compare three machine learning algorithms (MLAs): Maximum Likelihood (ML), Support Vector Machines (SVM), and Random Forest (RF) in the context of a supervised lithology classification task using Advanced Space-borne Thermal Emission and Reflection radiometer (ASTER) satellite, its derived, spatial information (spatial coordinates) and geomorphic data. We emphasize the enhancement in remote sensing lithological mapping accuracy that arises from the integration of geomorphic features and spatial information (spatial coordinates) in classifications. This study identifies that RF is better than ML and SVM algorithms in almost the sixteen combination datasets, which were tested. The overall accuracy of the best dataset combination with the RF map for the all seven classes reach ~80% and the producer and user's accuracies are ~73.91% and 76.09% respectively while the kappa coefficient is ~0.76. TPI is more effective with SVM algorithm than an RF algorithm. This paper demonstrates that adding geomorphic indices such as TPI and spatial information in the dataset increases the lithological classification accuracy.

Carboniferous volcanic rocks associated with back-arc extension in the western Chinese Tianshan, NW China: Insight from temporal-spatial character, petrogenesis and tectonic significance

NASA Astrophysics Data System (ADS)

Su, Wenbo; Cai, Keda; Sun, Min; Wan, Bo; Wang, Xiangsong; Bao, Zihe; Xiao, Wenjiao

2018-06-01

The Yili-Central Tianshan Block, as a Late Paleozoic major continental silver of the Central Asian Orogenic Belt, holds a massive volume of Carboniferous volcanic rocks, occurring as subparallel magmatic belts. However, the petrogenesis and tectonic implications of these volcanic rocks remain enigmatic. This study compiled isotopic age data for mapping their temporal-spatial character, and conducted petrogenetic study of these magmatic belts, aiming to understand their tectonic implications. Our compiled dataset reveals four magmatic belts in the Yili-Central Tianshan Block, including the Keguqinshan-Tulasu belt and the Awulale belt in the north, and the Wusun Mountain belt and the Haerk-Nalati belt in the south. In addition, our new zircon U-Pb dating results define two significant Early Carboniferous eruptive events (ca. 355-350 Ma and 325 Ma) in the Wusun Mountain belt. Volcanic rocks of the early significant eruptive event (ca. 355-350 Ma) in the Wusun Mountain comprise basalt, trachy-andesite, andesite, dacite and rhyolite, which are similar to the typical rock assemblage of a continental arc. Their positive εNd(t) values (+0.3 to +1.5) and relatively high Th/Yb and Nb/Yb ratios suggest the derivation from a mantle source with additions of slab-derived components. The gabbroic dykes and rhyolites of the late volcanic event (ca. 325 Ma) form a bimodal rock association, and they show alkaline features, with relatively low Th/Yb and Th/Nb ratios, and higher positive εNd(t) values (εNd(t) = +3.3-+5.0). It is interpreted that the gabbroic dykes and rhyolites may have been derived from mantle and juvenile crustal sources, respectively. The isotopic and trace elemental variations with time elapse of the Wusun Mountain magmatic belt show an important clue for strengthening depletion of the magma sources. Considering the distinctive temporal-spatial character of the Carboniferous volcanic rocks, two separate subduction systems in the southern and northern margins of the Yili-Central Tianshan Block were suggested to be the causes for extensive emplacements of the igneous products, which may be in an association with synchronous subduction of the South Tianshan and the North Tianshan oceanic plates, respectively. In this tectonic context, the Carboniferous magmatic rocks of the Wusun Mountain may be a tectonic response to the change in magma sources due to back-arc propagation in the western Chinese Tianshan.

Cenozoic topographic build-up of the Iranien plateau: first constraints from low-temperature thermochronology

NASA Astrophysics Data System (ADS)

François, Thomas; Agard, Philippe; Meyer, Bertrand; Zarrinkoub, Mohammad; Chung, Sun-Lin; Bernet, Matthias; Burov, Evgueni

2013-04-01

The Iranian plateau is a smooth topographic high at the rear of the Zagros mountains, with average elevation of c. 1.5 km. Its formation is thought to result from the collision between the Arabian and Eurasian plates since ~35 Myrs, following a long-standing subduction, and represents an interesting analogue to the so far better documented Tibetan plateau. Yet, while the Zagros orogeny was reappraised by numerous authors over the past few years, the topographic build-up of both the Zagros and the Iranian plateau remains ill-constrained. We herein present (U-Th)/He and fission track (FT) thermochronology results to reconstruct the Cenozoic tectonic evolution of the Iranien plateau and quantify the age and amount of vertical movements. Apatite and zircon single grain cooling age data were collected on plutonic rocks (for which crystallization ages were already available: Chiu et al., 2010) from the internal domains of Sanandaj-Sirjan Zone (SSZ), Urumieh-Doktar magmatic arc (UDMA), Central Iran and, for comparison, Kopet Dagh. We stress that an important milestone for topographic build-up is the presence of the marine Qom formation (coeval with the external Asmari formation) in the UDMA and part of the SSZ, indicating that the plateau was at or near sea level at 20 Ma. Temperature time paths inferred from low temperature thermochronology suggest a spatial and temporal separation of exhumation processes. The results show that the SSZ was exhumed very early in the collision process (essentially before 20 Ma), with a likely acceleration around the Oligocene (i.e., at the onset of continental collision) from 0.05 to 0.3 mm/yr. Post-collision cooling along the UDMA is marked by an average, constant exhumation rate of 0.3-0.4 mm/yr, which suggests that no significant increase or decrease of erosion occurred since continental collision. In Central Iran, the overlap (within error) of ZrFT, AFT and AHe ages from gneissic samples points to their rapid cooling during the upper Eocene (~42°C/Ma). These results are consistent with the reported formation of several small metamorphic core-complexes in Central Iran towards the end of oceanic subduction, possibly associated with slab rollback. Our thermochronological data allow to locate major topographic and erosional changes during the Cenozoic. Topographic build-up occurred in the SSZ during oceanic subduction and onset of collision (35 Ma) and shifted to the UDMA during continental collision (20 Ma), while progressing towards the external parts of the belt during the Mio-Pliocene (5-10 Ma). Most importantly, we conclude that the uplift of the Iranian plateau was a constant, steady process over the last 20 Ma, at least as a first approximation, as inferred from the combination of constant exhumation in the UDMA and sedimentary records of the central Iranian basin.

A systematic review of wild grass exploitation in relation to emerging cereal cultivation throughout the Epipalaeolithic and aceramic Neolithic of the Fertile Crescent.

PubMed

Weide, Alexander; Riehl, Simone; Zeidi, Mohsen; Conard, Nicholas J

2018-01-01

The present study investigates the occurrence of wild grasses at Epipalaeolithic and aceramic Neolithic sites in the Near East in order to assess their role in subsistence economies alongside the emergence of cereal cultivation. We use Chogha Golan in the foothills of the central Zagros Mountains (ca. 11.7-9.6 ka cal. BP) as a case study, where the archaeobotanical data suggest the frequent exploitation of a complex of wild grasses for almost 2,000 years. Domesticated emmer replaced these wild grasses as the major food resources towards the end of occupation at the site (ca. 9.8 ka cal. BP). We discuss possible implications of this development and conclude that the traditional concept of pre-domestication cultivation seems unsuited for explaining the patterns from Chogha Golan. These data are in good accordance with the overall picture in the Zagros Mountains, where wild grasses were routinely gathered throughout the early Holocene. In contrast, wild grasses were gradually replaced by wild cereals in the Levantine corridor since the end of the Pleistocene. However, several sites located in this region provide evidence for a continuous exploitation of wild grasses alongside emerging cereal cultivation and most of these taxa were part of the earliest segetal floras that evolved with the appearance of domestic cereals throughout the 11th millennium cal. BP. Some sites contemporary to the Pre-Pottery Neolithic B still provide evidence for the usage of wild grasses, which possibly reflects the utilization of edible arable weeds and continuous gathering of wild grasses by more mobile groups.

Formation of fold-and-thrust belts on Venus by thick-skinned deformation

NASA Astrophysics Data System (ADS)

Zuber, M. T.; Parmentier, E. M.

1995-10-01

ON Venus, fold-and-thrust belts—which accommodate large-scale horizontal crustal convergence—are often located at the margins of kilometre-high plateaux1-5. Such mountain belts, typically hundreds of kilometres long and tens to hundreds of kilometres wide, surround the Lakshmi Planum plateau in the Ishtar Terra highland (Fig. 1). In explaining the origin of fold-and-thrust belts, it is important to understand the relative importance of thick-skinned deformation of the whole lithosphere and thin-skinned, large-scale overthrusting of near-surface layers. Previous quantitative analyses of mountain belts on Venus have been restricted to thin-skinned models6-8, but this style of deformation does not account for the pronounced topographic highs at the plateau edge. We propose that the long-wavelength topography of these venusian fold-and-thrust belts is more readily explained by horizontal shortening of a laterally heterogeneous lithosphere. In this thick-skinned model, deformation within the mechanically strong outer layer of Venus controls mountain building. Our results suggest that lateral variations in either the thermal or mechanical structure of the interior provide a mechanism for focusing deformation due to convergent, global-scale forces on Venus.

Global deformation on the surface of Venus

NASA Technical Reports Server (NTRS)

Bilotti, Frank; Connors, Chris; Suppe, John

1992-01-01

Large-scale mapping of tectonic structures on Venus shows that there is an organized global distribution to deformation. The structures we emphasize are linear compressive mountain belts, extensional rafted zones, and the small-scale but widely distributed wrinkle ridges. Ninety percent of the area of the planet's compressive mountain belts are concentrated in the northern hemisphere whereas the southern hemisphere is dominated by extension and small-scale compression. We propose that this striking concentration of fold belts in the northern hemisphere, along with the globe-encircling equatorial rift system, represents a global organization to deformation on Venus.

Geometry and Dynamics of the Mesopotamian Foreland Basin

NASA Astrophysics Data System (ADS)

Pirouz, M.; Avouac, J. P.; Gualandi, A.; Hassanzadeh, J.; Sternai, P.

2016-12-01

We have constrained the geometry of the Zagros foreland basin along the entire northern edge of the Arabian plate using subsurface data from Iran, Iraq and Syria. We use the Oligo-Miocene marine Asmari Formation and its equivalents in the region to reconstruct high resolution foreland basin geometry. This extensive carbonate platform limestone unit separates pre-collisional passive margin marine sediments from the Cenozoic foreland deposits dominated by continental sources; and therefore it can be used as a measure of post-collisional deflection. The 3D reconstructed Asmari Formation shows along-strike thickness variations of the foreland basin deposits from 1 to 6 km. The deepest part of the foreland basin coincides with the Dezful embayment in Iran, and its depth decreases on both sides. In principle the basin geometry should reflect the loading resulted from overthrusting in the Zagros fold-thrust belt, the sediment fill and dynamic stresses due to lithospheric and upper mantle deformation. To estimate these various sources of loads we analyze the basin geometry in combination with gravity, free air anomaly, and Moho depths determined from seismological observations. Our analysis suggests in particular that redistribution of surface load by surface processes is a primary controlling factor of the basin geometry. The wavelength of a foreland basin may bear little information on the elastic flexural rigidity of the lithosphere.

Computer-based self-organized tectonic zoning: a tentative pattern recognition for Iran

NASA Astrophysics Data System (ADS)

Zamani, Ahmad; Hashemi, Naser

2004-08-01

Conventional methods of tectonic zoning are frequently characterized by two deficiencies. The first one is the large uncertainty involved in tectonic zoning based on non-quantitative and subjective analysis. Failure to interpret accurately a large amount of data "by eye" is the second. In order to alleviate each of these deficiencies, the multivariate statistical method of cluster analysis has been utilized to seek and separate zones with similar tectonic pattern and construct automated self-organized multivariate tectonic zoning maps. This analytical method of tectonic regionalization is particularly useful for showing trends in tectonic evolution of a region that could not be discovered by any other means. To illustrate, this method has been applied for producing a general-purpose numerical tectonic zoning map of Iran. While there are some similarities between the self-organized multivariate numerical maps and the conventional maps, the cluster solution maps reveal some remarkable features that cannot be observed on the current tectonic maps. The following specific examples need to be noted: (1) The much disputed extent and rigidity of the Lut Rigid Block, described as the microplate of east Iran, is clearly revealed on the self-organized numerical maps. (2) The cluster solution maps reveal a striking similarity between this microplate and the northern Central Iran—including the Great Kavir region. (3) Contrary to the conventional map, the cluster solution maps make a clear distinction between the East Iranian Ranges and the Makran Mountains. (4) Moreover, an interesting similarity between the Azarbaijan region in the northwest and the Makran Mountains in the southeast and between the Kopet Dagh Ranges in the northeast and the Zagros Folded Belt in the southwest of Iran are revealed in the clustering process. This new approach to tectonic zoning is a starting point and is expected to be improved and refined by collection of new data. The method is also a useful tool in studying neotectonics, seismotectonics, seismic zoning, and hazard estimation of the seismogenic regions.

Fold growth and drainage evolution of the Perman - Bana Bawi Anticline (Northern Iraq)

NASA Astrophysics Data System (ADS)

Bretis, B.; Grasemann, B.; Faber, R.; Lockhart, D.

2009-04-01

The Zagros fold- and thrust belt is a seismically active orogen, which is the result of the Cenozoic collision between the Eurasian and the Arabian plates. Kinematic models based on GPS networks suggest a north-south shortening between Arabia and Eurasia in the order of 2-2.5 cm/a. Most of this deformation is partitioned within the Zagros mountains in S-SW directed folding and thrusting as well as in NW-SE to N-S trending dextral strike slip faults. We investigate in this work the growth of the Perman - Bana Bawi anticlines (northeast of Erbil in Kurdistan region) by means of structural field work and tectonic geomorphology based on a geological map and ASTER remote sensing data (digital elevation model and satellite images). The Perman - Bana Bawi anticline forms a slightly S-shaped NW-SE striking fold chain over an exposed distance of more than 80 km. The dominant wavelength of the fold train is about 8 km. The backlimb dips with about 35° to the NE and the forelimb has a mean dip of about 45° towards SW. Hydrologically, there are few rivers with all-year flow conditions and therefore the dominant fluviatile erosion mainly takes place in the months with periodical precipitation, which varies between 700 and 3,000 mm/a (i.e. during the winter months). The presence of wind gaps and the pattern of deflected rivers suggest that the Perman and the Bana Bawi anticline initially developed as individual structures. The lateral growth directions are constrained by fanned drainage, which are especially in the cylindrical parts of the fold strongly overprinted by transverse rivers perpendicular to the fold axis. Although incising the same stratigraphic strata, the erosion pattern on backlimbs clearly differs from the tributary pattern on the forelimbs. The backlimbs are characterized by drainage parallel to the fold crest and asymmetric forked networks. Forelimbs are more strongly dissected by rivers with higher sinuosities with an older generation partly oblique to the slope. The southeastward and northwestward diverted river tributaries between the Perman and the Bana Bawi anticlines as well as their junction in a narrow outlet probably suggests that both anticlines started to amplify as individual segments and joined during lateral propagation.

Regional seismic wave propagation (Lg and Sn) and Pn attenuation in the Arabian Plate and surrounding regions

NASA Astrophysics Data System (ADS)

Al-Damegh, Khaled; Sandvol, Eric; Al-Lazki, Ali; Barazangi, Muawia

2004-05-01

Continuous recordings of 17 broadband and short-period digital seismic stations from a newly established seismological network in Saudi Arabia, along with digital recordings from the broadband stations of the GSN, MEDNET, GEOFON, a temporary array in Saudi Arabia, and temporary short period stations in Oman, were analysed to study the lithospheric structure of the Arabian Plate and surrounding regions. The Arabian Plate is surrounded by a variety of types of plate boundaries: continental collision (Zagros Belt and Bitlis Suture), continental transform (Dead Sea fault system), young seafloor spreading (Red Sea and the Gulf of Aden) and oceanic transform (Owen fracture zone). Also, there are many intraplate Cenozoic processes such as volcanic eruptions, faulting and folding that are taking place. We used this massive waveform database of more than 6200 regional seismograms to map zones of blockage, inefficient and efficient propagation of the Lg and Sn phases in the Middle East and East Africa. We observed Lg blockage across the Bitlis Suture and the Zagros fold and thrust belt, corresponding to the boundary between the Arabian and Eurasian plates. This is probably due to a major lateral change in the Lg crustal waveguide. We also observed inefficient Lg propagation along the Oman mountains. Blockage and inefficient Sn propagation is observed along and for a considerable distance to the east of the Dead Sea fault system and in the northern portion of the Arabian Plate (south of the Bitlis Suture). These mapped zones of high Sn attenuation, moreover, closely coincide with extensive Neogene and Quaternary volcanic activity. We have also carefully mapped the boundaries of the Sn blockage within the Turkish and Iranian plateaus. Furthermore, we observed Sn blockage across the Owen fracture zone and across some segments of the Red Sea. These regions of high Sn attenuation most probably have anomalously hot and possibly thin lithospheric mantle (i.e. mantle lid). A surprising result is the efficient propagation of Sn across a segment of the Red Sea, an indication that active seafloor spreading is not continuous along the axis of the Red Sea. We also investigated the attenuation of Pn phase (QPn) for 1-2 Hz along the Red Sea, the Dead Sea fault system, within the Arabian Shield and in the Arabian Platform. Consistent with the Sn attenuation, we observed low QPn values of 22 and 15 along the western coast of the Arabian Plate and along the Dead Sea fault system, respectively, for a frequency of 1.5 Hz. Higher QPn values of the order of 400 were observed within the Arabian Shield and Platform for the same frequency. Our results based on Sn and Pn observations along the western and northern portions of the Arabian Plate imply the presence of a major anomalously hot and thinned lithosphere in these regions that may be caused by the extensive upper mantle anomaly that appears to span most of East Africa and western Arabia.

Architecture of orogenic belts and convergent zones in Western Ishtar Terra, Venus

NASA Technical Reports Server (NTRS)

Head, James W.; Vorderbruegge, R. W.; Crumpler, L. S.

1989-01-01

Linear mountain belts in Ishtar Terra were recognized from Pioneer-Venus topography, and later Arecibo images showed banded terrain interpreted to represent folds. Subsequent analyses showed that the mountains represented orogenic belts, and that each had somewhat different features and characteristics. Orogenic belts are regions of focused shortening and compressional deformation and thus provide evidence for the nature of such deformation, processes of crustal thickening (brittle, ductile), and processes of crustal loss. Such information is important in understanding the nature of convergent zones on Venus (underthrusting, imbrication, subduction), the implications for rates of crustal recycling, and the nature of environments of melting and petrogenesis. The basic elements of four convergent zones and orogenic belts in western Ishtar Terra are identified and examined, and then assess the architecture of these zones (the manner in which the elements are arrayed), and their relationships. The basic nomenclature of the convergent zones is shown.

U-Pb and Hf isotope analysis of detrital zircons from Mesozoic strata of the Gravina belt, southeast Alaska

NASA Astrophysics Data System (ADS)

Yokelson, Intan; Gehrels, George E.; Pecha, Mark; Giesler, Dominique; White, Chelsi; McClelland, William C.

2015-10-01

The Gravina belt consists of Upper Jurassic through Lower Cretaceous marine clastic strata and mafic-intermediate volcanic rocks that occur along the western flank of the Coast Mountains in southeast Alaska and coastal British Columbia. This report presents U-Pb ages and Hf isotope determinations of detrital zircons that have been recovered from samples collected from various stratigraphic levels and from along the length of the belt. The results support previous interpretations that strata in the western portion of the Gravina belt accumulated along the inboard margin of the Alexander-Wrangellia terrane and in a back-arc position with respect to the western Coast Mountains batholith. Our results are also consistent with previous suggestions that eastern strata accumulated along the western margin of the inboard Stikine, Yukon-Tanana, and Taku terranes and in a fore-arc position with respect to the eastern Coast Mountains batholith. The history of juxtaposition of western and eastern assemblages is obscured by subsequent plutonism, deformation, and metamorphism within the Coast Mountains orogen, but may have occurred along an Early Cretaceous sinistral transform system. Our results are inconsistent with models in which an east-facing subduction zone existed along the inboard margin of the Alexander-Wrangellia terrane during Late Jurassic-Early Cretaceous time.

Upper crustal mechanical stratigraphy and the evolution of thrust wedges: insights from sandbox analogue experiments

NASA Astrophysics Data System (ADS)

Milazzo, Flavio; Storti, Fabrizio; Nestola, Yago; Cavozzi, Cristian; Magistroni, Corrado; Meda, Marco; Salvi, Francesca

2016-04-01

Crustal mechanical stratigraphy i.e. alternating mechanically weaker and stronger layers within the crust, plays a key role in determining how contractional deformations are accommodated at convergent plate boundaries. In the upper crust, evaporites typically provide preferential décollement layers for fault localization and foreland ward propagation, thus significantly influencing evolution of thrust-fold belts in terms of mechanical balance, geometries, and chronological sequences of faulting. Evaporites occur at the base of many passive margin successions that underwent positive inversion within orogenic systems. They typically produce salient geometries in deformation fronts, as in the Jura in the Northern Alps, the Salakh Arch in the Oman Mountains, or the Ainsa oblique thrust-fold belt in the Spanish Pyrenees. Evaporites frequently occur also in foredeep deposits, as in the Apennines, the Pyrenees, the Zagros etc. causing development of additional structural complexity. Low-friction décollement layers also occur within sedimentary successions involved in thrust-fold belts and they contribute to the development of staircase fault trajectories. The role of décollement layers in thrust wedge evolution has been investigated in many experimental works, particularly by sandbox analogue experiments that have demonstrated the impact of basal weak layers on many first order features of thrust wedges, including the dominant fold vergence, the timing of fault activity, and the critical taper. Some experiments also investigated on the effects of weak layers within accreting sedimentary successions, showing how this triggers kinematic decoupling of the stratigraphy above and below the décollements, thus enhancing disharmonic deformation. However, at present a systematic experimental study of the deformation modes of an upper crustal mechanical stratigraphy consisting of both low-friction and viscous décollement layers is still missing in the specific literature. In this contribution we present the results of such a study, where a three-décollement mechanical stratigraphy has been deformed in the sandbox at the same boundary conditions. Different rheological properties were assigned to the three décollements in different experiments, up to testing all possible mechanical stratigraphies. Implications on thrust propagation and slip rate history and cross-sectional thrust wedge architecture are discussed and compared with natural cases.

Magellan radar image of Danu Montes in Lakshmi Region of Venus

NASA Technical Reports Server (NTRS)

1990-01-01

This Magellan radar mosaic image is of part of the Danu Montes in the Lakshmi Region of Venus. The area in the image is located at 329.6 degrees east longitude and 58.75 degrees north latitude. This image shows an area 40 kilometers (km) (19.6 miles) wide and 60 km (39.2 miles) long. Danu Montes is a mountain belt located at the southern edge of the Ishtar Terra highland region. It rises one to three kilometers above a flat plain to the north known as Lakshmi Planum. On the basis of Pioneer Venus, Arecibo and Venera data, Danu Montes and the other mountain belts surrounding Lakshmi Planum have been interpreted to be orogenic belts marking the focus of compressional deformation, much like the Appalachian and Andes ranges on Earth. In the upper right part of this image, relatively bright, smooth-textured plains of Lakshmi Planum are seen to embay the heavily deformed mountain range to the south. In the mountain range south of these plains the geology is dominated by abundant faults at mu

MT data inversion and sensitivity analysis to image electrical structure of Zagros collision zone

NASA Astrophysics Data System (ADS)

Layegh Haghighi, T.; Montahaei, M.; Oskooi, B.

2018-01-01

Magnetotelluric (MT) data from 46 stations on a 470-km-long profile across the Zagros fold-thrust belt (ZFTB) that marks the Arabia-Eurasia collision zone were inverted to derive 2-D electrical resistivity structure between Busher on the coast of Persian Gulf and Posht-e-Badam, 160 km north east of Yazd. The model includes prominent anomalies in the upper and lower crust, beneath the brittle-ductile transition depth and mostly related to the fluid distribution and sedimentary layers beneath the profile. The conductivities and dimensions of the fault zone conductors (FZCs) and high conductivity zones (HCZs) as the major conductive anomalies in a fault zone conceptual model vary significantly below the different faults accommodated in this region. The enhanced conductivity below the site Z30 correlates well with the main Zagros thrust (MZT), located at the western boundary of Sanandaj-Sirjan zone (SSZ) and known as the transition between the two continents. The depth extent of the huge conductor beneath the south west of the profile, attributed to the thick sedimentary columns of the Arabian crust, cannot be resolved due to the smearing effect of the smoothness constraint employed in the regularized inversion procedure and the sensitivity of MT data to the conductance of the subsurface. We performed different tests to determine the range of 2-D models consistent with the data. Our approach was based on synthetic studies, comprising of hypothesis testing and the use of a priori information throughout the inversion procedure as well as forward modeling. We conclude that the minimum depth extent of the conductive layer beneath the southwest of the profile can be determined as approximately deeper than 15 km and also the screening effect of the conductive overburden is highly intense in this model and prevents the deep structures from being resolved properly.

Evidence of Vertical and Horizontal Motions on Venus: Maxwell Montes

NASA Astrophysics Data System (ADS)

Ansan, V.; Vergely, P.

1995-01-01

Based on full-resolution Magellan radar images, the detailed structural analysis of central Ishtar Terra (Venus) provides new insight to the understanding of the Venusian tectonics. Ishtar Terra, centered on 65° N latitude and 0° E longitude includes a high plateau. Lakshmi Planum, surrounded by highlands, the most important being Maxwell Montes to the East. Structural analysis has been performed with classical remote-sensing methods. Folds and faults identified on radar images were reported on structural map. Their type and distribution allowed to define the style of the crustal deformation and the context in which these structures formed. This analysis shows that Lakshmi Planum formed under a crustal stretching associated with a volcanic activity. This area then became a relatively steady platform, throughout the formation of Maxwell Montes mountain belt. Maxwell Montes is characterized by a series of NNW-SSE trending thrust faults dipping to the East, formed during a WSW-ESE horizontal shortening. In its NW quarter, the mountain belt shows a disturbed deformation controlled by pre-existing grabens and old vertical crustal fault zone. The deformation of this area is characterized by a shortening of cover above a flat detachment zone, with a progressive accommodation to the southwest. All these tectonic structures show evidence of horizontal and vertical crustal movements on Venus, with subsidence, mountain belt raise, West regional overthrusting of this mountain belt, and regional shear zone.

A systematic review of wild grass exploitation in relation to emerging cereal cultivation throughout the Epipalaeolithic and aceramic Neolithic of the Fertile Crescent

PubMed Central

Riehl, Simone; Zeidi, Mohsen; Conard, Nicholas J.

2018-01-01

The present study investigates the occurrence of wild grasses at Epipalaeolithic and aceramic Neolithic sites in the Near East in order to assess their role in subsistence economies alongside the emergence of cereal cultivation. We use Chogha Golan in the foothills of the central Zagros Mountains (ca. 11.7–9.6 ka cal. BP) as a case study, where the archaeobotanical data suggest the frequent exploitation of a complex of wild grasses for almost 2,000 years. Domesticated emmer replaced these wild grasses as the major food resources towards the end of occupation at the site (ca. 9.8 ka cal. BP). We discuss possible implications of this development and conclude that the traditional concept of pre-domestication cultivation seems unsuited for explaining the patterns from Chogha Golan. These data are in good accordance with the overall picture in the Zagros Mountains, where wild grasses were routinely gathered throughout the early Holocene. In contrast, wild grasses were gradually replaced by wild cereals in the Levantine corridor since the end of the Pleistocene. However, several sites located in this region provide evidence for a continuous exploitation of wild grasses alongside emerging cereal cultivation and most of these taxa were part of the earliest segetal floras that evolved with the appearance of domestic cereals throughout the 11th millennium cal. BP. Some sites contemporary to the Pre-Pottery Neolithic B still provide evidence for the usage of wild grasses, which possibly reflects the utilization of edible arable weeds and continuous gathering of wild grasses by more mobile groups. PMID:29293519

Folding kinematics expressed in fracture patterns: An example from the Anti-Atlas fold belt, Morocco

NASA Astrophysics Data System (ADS)

Ismat, Zeshan

2008-11-01

The Anti-Atlas fold belt, Morocco, formed during the same Variscan collisional event that produced the Valley-and-Ridge fold-thrust belt of the Appalachian mountains. Both are external belts of the Appalachian-Ouachita-Mauritanides chain and at the map scale have very similar topographic expressions. The Anti-Atlas, however, consists of map-scale folds that are buckle-related, detachment folds, whereas the Valley-and-Ridge folds developed in response to imbricate thrusting. For this reason, the Anti-Atlas is referred to as a fold belt rather than a fold-thrust belt. This paper examines Variscan folding processes in the Anti-Atlas Mountains. Folding in some layers occurred by sliding along a penetrative network of mesoscale fractures, i.e. cataclastic flow, during buckling. Layer-parallel shortening fractures were reactivated in the later stages of folding to accommodate limb rotation. Although 'boutonnieres', i.e. basement uplifts, punctuate the fold belt, the fracture patterns indicate that the uplifts failed to provide any 'bending' component. Folding is also interpreted to occur under low to moderate confining pressures because the fracture network includes conjugate shear fractures with very small (˜20°) dihedral angles.

Crustal and lithospheric structure of the Alborz Mountains, Iran, and surrounding areas from integrated geophysical modeling

NASA Astrophysics Data System (ADS)

Motavalli-Anbaran, Seyed-Hani; Zeyen, Hermann; Brunet, Marie-FrançOise; Ardestani, Vahid Ebrahimzadeh

2011-10-01

Using gravity, geoid, topography and surface heat flow data, we have modeled the density and temperature distribution in the lithosphere along three profiles crossing Iran in SW-NE direction from the Arabian foreland in the SW to the South Caspian Basin and the Turan Platform to the NE. We find thin lithosphere (100-120 km) underneath central Iran, whereas thick lithosphere (up to 240 km) is found underneath Arabia, the South Caspian Basin and the Turan Platform. Crustal thickening is found under the Zagros and Alborz mountains (up to 60 km) and under the Kopet-Dagh Mountains (48 km), whereas the thin crust under the southern Caspian Sea is either an oceanic crust or a highly thinned continental one. Below the South Caspian Sea, the shape of the crust-mantle interface and the base of the lithosphere indicate a subduction of the South Caspian block toward the N-NW. Further east, under the Kopet-Dagh, no evidence for active subduction is visible. This can be explained by a rheologically very strong South Caspian block, surrounded by weaker continental lithosphere.

A contribution to the knowledge of the mountain entomofauna of Mexico with a description of two new species of Onthophagus Latreille, 1802 (Coleoptera, Scarabaeidae, Scarabaeinae)

PubMed Central

Moctezuma, Victor; Rossini, Michele; Zunino, Mario; Halffter, Gonzalo

2016-01-01

Abstract Recent intensive samplings carried out across the mountainous regions of El Pinal (Puebla, Mexico) have provided new insights into the main environmental factors that affect the geographic distribution of the scarabaeinae beetles of the Trans-Mexican Volcanic Belt above 2500 m a.s.l. This study is part of an ongoing project investigating the diversity and biogeography of copro-necrophagous beetles (Scarabaeinae, Aphodiinae, Geotrupinae and Silphidae) in the easternmost areas of the Trans-Mexican Volcanic Belt. Previous experience allows us to propose a series of predictions that we expect will provide possible explanations for current distribution patterns observed in Scarabaeinae and other groups of insects found in the Trans-Mexican Volcanic Belt. This mountain range has a primarily biogeographic importance, limiting the Mexican High Plateau in the South and connecting the western and eastern Sierra Madre mountain chains, which are considered the most important routes for dispersal of mountain fauna of northern origin. The taxonomic and biogeographic study of the species collected so far in El Pinal (including Onthophagus clavijeroi sp. n. and Onthophagus martinpierai sp. n. described here), along with their possible relationships with other known species, allows us to answer the preliminary assumptions proposed. PMID:28050158

A contribution to the knowledge of the mountain entomofauna of Mexico with a description of two new species of Onthophagus Latreille, 1802 (Coleoptera, Scarabaeidae, Scarabaeinae).

PubMed

Moctezuma, Victor; Rossini, Michele; Zunino, Mario; Halffter, Gonzalo

2016-01-01

Recent intensive samplings carried out across the mountainous regions of El Pinal (Puebla, Mexico) have provided new insights into the main environmental factors that affect the geographic distribution of the scarabaeinae beetles of the Trans-Mexican Volcanic Belt above 2500 m a.s.l. This study is part of an ongoing project investigating the diversity and biogeography of copro-necrophagous beetles (Scarabaeinae, Aphodiinae, Geotrupinae and Silphidae) in the easternmost areas of the Trans-Mexican Volcanic Belt. Previous experience allows us to propose a series of predictions that we expect will provide possible explanations for current distribution patterns observed in Scarabaeinae and other groups of insects found in the Trans-Mexican Volcanic Belt. This mountain range has a primarily biogeographic importance, limiting the Mexican High Plateau in the South and connecting the western and eastern Sierra Madre mountain chains, which are considered the most important routes for dispersal of mountain fauna of northern origin. The taxonomic and biogeographic study of the species collected so far in El Pinal (including Onthophagus clavijeroi sp. n. and Onthophagus martinpierai sp. n. described here), along with their possible relationships with other known species, allows us to answer the preliminary assumptions proposed.

Strain analysis in the Sanandaj-Sirjan HP-LT Metamorphic Belt, SW Iran: Insights from small-scale faults and associated drag folds

NASA Astrophysics Data System (ADS)

Sarkarinejad, Khalil; Keshavarz, Saeede; Faghih, Ali

2015-05-01

This study is aimed at quantifying the kinematics of deformation using a population of drag fold structures associated with small-scale faults in deformed quartzites from Seh-Ghalatoun area within the HP-LT Sanandaj-Sirjan Metamorphic Belt, SW Iran. A total 30 small-scale faults in the quartzite layers were examined to determine the deformation characteristics. Obtained data revealed α0 (initial fault angle) and ω (angle between flow apophyses) are equal to 83° and 32°, respectively. These data yield mean kinematic vorticity number (Wm) equal to 0.79 and mean finite strain (Rs) of 2.32. These results confirm the relative contribution of ∼43% pure shear and ∼57% simple shear components, respectively. The strain partitioning inferred from this quantitative analysis is consistent with a sub-simple or general shear deformation pattern associated with a transpressional flow regime in the study area as a part of the Zagros Orogen. This type of deformation resulted from oblique convergence between the Afro-Arabian and Central-Iranian plates.

Reprocessing and Interpretation of Vintage Seismic Reflection Data: Evidence for the Tectonic History of the Rocky Mountain Trench, Northwest Montana.

NASA Astrophysics Data System (ADS)

Porter, M.; Speece, M. A.; Rutherford, B. S.; Constenius, K. N.

2014-12-01

In 1983 Techno, Inc. collected five seismic reflection profiles in the region between Whitefish, Montana and the United States-Canada border. The poulter method was used to gather four of these profiles and one profile was collected using a vibroseis source. We are currently reprocessing these data in order to construct a regional geological interpretation. The profiles cover a key position in the hinterland of the Cordillera in the lee of the Lewis thrust salient where the east-northeast verging Lewis thrust fault system translated (horizontal displacement >100 km) and inverted a thick, strong slab of primarily Belt-Purcell rocks out of a deep Precambrian depositional basin onto a cratonic platform. In this event, Belt-Purcell rocks were thrust over complexly imbricated Phanerozoic strata in the foreland. Late Mesozoic compressional deformation was followed by Cenozoic extensional collapse of the over-thickened Cordillera and subsequent basin and range style deformation that produced an array of northwest trending grabens. Three of the seismic profiles cross the Rocky Mountain Trench; the Trench is a linear structure of regional dimension that is an expression of the extensional fragmentation of the Cordillera. Strong reflections, interpreted as sills encased within Lower Belt rocks (encountered in the Arco-Marathon 1 Paul Gibbs borehole), outline the complexly folded and faulted structure of the eastern limb of the Purcell anticlinorium. East of the Rocky Mountain Trench stratified reflections within Belt rocks clearly outline the Wigwam Thrust. Beneath the Whitefish Range, an apparent inflection in the strongly reflective basal Cambrian veneer marks the westerly increase in dip of the Rocky Mountain Basal Detachment. The dip contrast between the foreland and hinterland might be a manifestation of the tectonic loading of the Belt basin margin and the loading might have localized extension across the Rocky Mountain Trench.

Weathering processes and the composition of inorganic material transported through the orinoco river system, Venezuela and Colombia

USGS Publications Warehouse

Stallard, R.F.; Koehnken, L.; Johnsson, M.J.

1991-01-01

The composition of river-borne material in the Orinoco River system is related primarily to erosion regime, which in turn is related to tectonic setting; especially notable is the contrast between material derived from tectonically active mountain belts and that from stable cratonic regions. For a particular morpho-tectonic region, the compositional suites of suspended sediment, bed material, overback deposits, and dissolved phases are fairly uniform are are typically distinct from whose of other regions. For each region, a consistent set of chemical weathering reactions can be formulated to explain the composition of dissolved and solid loads. In developing these formulations, erosion on slopes and storage of solids in soils and alluvial sediments are important considerations. Compositionally verymature sediment is derived from areas of thick soils where erosion is transport limited and from areas where sediments are stored for extended periods of time in alluvial deposits. Compositionally immature sediments are derived from tectonically active mountain belts where erosion is weathering limited. Weathering-limited erosion also is important in the elevated parts of the Guayana Shield within areas of sleep topography. Compared to the mountain belts, sediments derived from elevated parts of the Shield are more mature. A greater degree of chemical weathering seems to be needed to erode the rock types typical of the Shield. The major-element chemistry and mineral composition of sediment delivered by the Orinoco River to the ocean are controlled by rivers that have their headwaters in mountain belts and cross the Llanos, a region of alluvial plains within the foreland basin. The composition of sediments in rivers that drain the Shield seems to be established primarily at the site of soil formation, whereas for rivers that drain the mountain belts, additional weathering occurs during s episodes of storage on alluvial plains as sediments are transported across the Llanos to the main stem of the Orinoco. After mixing into the main stem, there seems to be little subsequent alteration of sediment. ?? 1991.

Extrusional Tectonics over Plate Corner: an Example in Northern Taiwan

NASA Astrophysics Data System (ADS)

Lu, Chia-Yu; Lee, Jian-Cheng; Li, Zhinuo; Lee, Ching-An; Yeh, Chia-Hung

2016-04-01

In northern Taiwan, contraction, transcurrent shearing, block rotation and extension are four essential tectonic deformation mechanisms involved in the progressive deformation of this arcuate collision mountain belt. The neotectonic evolution of the Taiwan mountain belt is mainly controlled not only by the oblique convergence between the Eurasian plate and the Philippine Sea plate but also the corner shape of the plate boundary. Based on field observations and analyses, and taking geophysical data (mostly GPS) and experimental modelling into account, we interpret the curved belt of northern Taiwan as a result of of contractional deformation (with compression, thrust-sheet stacking & folding, back thrust duplex & back folding) that induced vertical extrusion, combined with increasing transcurrent & rotational deformation (with transcurrent faulting, bookshelf-type strike-slip faulting and block rotation) that induced transcurrent/rotational extrusion and extension deformation which in turn induced extensional extrusion. As a consequence, a special type of extrusional folds was formed in association with contractional, transcurrent & rotational and extensional extrusions subsequently. The extrusional tectonics in northern Taiwan reflect a single, albeit complicated, regional pattern of deformation. The crescent-shaped mountain belt of Northeastern Taiwan develops in response to oblique indentation by an asymmetric wedge indenter, retreat of Ryukyu trench and opening of the Okinawa trough.

Extrusional Tectonics at Plate Corner: an Example in Northern Taiwan

NASA Astrophysics Data System (ADS)

Lu, C. Y.; Lee, J. C.; Li, Z.; Yeh, C. H.; Lee, C. A.

2015-12-01

In northern Taiwan, contraction, transcurrent shearing, block rotation and extension are four essential tectonic deformation mechanisms involved in the progressive deformation of this arcuate collision mountain belt. The neotectonic evolution of the Taiwan mountain belt is mainly controlled not only by the oblique convergence between the Eurasian plate and the Philippine Sea plate but also the corner shape of the plate boundary. Based on field observations and analyses, and taking geophysical data (mostly GPS) and experimental modelling into account, we interpret the curved belt of northern Taiwan as a result of of contractional deformation (with compression, thrust-sheet stacking & folding, back thrust duplex & back folding) that induced vertical extrusion, combined with increasing transcurrent & rotational deformation (with transcurrent faulting, bookshelf-type strike-slip faulting and block rotation) that induced transcurrent/rotational extrusion and extension deformation which in turn induced extensional extrusion. As a consequence, a special type of extrusional folds was formed in association with contractional, transcurrent & rotational and extensional extrusions subsequently. The extrusional tectonics in northern Taiwan reflect a single, albeit complicated, regional pattern of deformation. The crescent-shaped mountain belt of Northeastern Taiwan develops in response to oblique indentation by an asymmetric wedge indenter and opening of the Okinawa trough at plate corner.

Oroclines - a century of discourse about curved mountain belts (Petrus Peregrinus Medal Lecture)

NASA Astrophysics Data System (ADS)

Van der Voo, Rob

2014-05-01

Exactly a century ago, in early 2014, a discussion appeared in the Journal of Geology by William H. Hobbs entitled "Mechanics of formation of arcuate mountains". In it, he notes how the concept of nappes "has now overcome all opposition in Switzerland" and, presumably in other countries just as much. With horizontal transport so central to the nappe concept, this must have paved the way for the idea that emplacement of trust sheets may have involved rotations. Where such rotations form a coherent regional pattern, a curved mountain belt may be the result. While the paper by Hobbs does not mention the word orocline, and while the dynamics of the situation is not yet illuminated, one must give credit to him for his foresights. The term "orocline" was introduced by S. Warren Carey of Tasmania in 1955, as part of a kinematic analysis of rhomb- and triangle-shaped basins and curved mountain belts. When the displacements involved in the analysis are undone, as he did, for instance, in the western Mediterranean, a grand scheme of simple convergent and divergent patterns emerges. Noteworthy is, of course, the fact that this mobilistic analysis preceded plate tectonics by more than a decade. From Carey (although not exactly in his words) we have inherited the definition of orocline, as "a thrust belt or orogen that is curved in map-view due to it having been bent or buckled about a vertical axis of rotation". Because oroclinal bending involves rotations, the declinations of paleomagnetic studies can be utilized to support and quantify them, and early efforts were already made in the 1960's and early 1970's to do so (e.g., Krs in the Carpathians; Ries & Shackleton in Cantabria; Roy, Opdyke & Irving in the Central Appalachians; Packer & Stone in Alaska). Curved mountain belts everywhere were subsequently investigated, and typically shown by paleomagnetists to be of the oroclinal variety. Few curved belts turned out to be curved from the start. Because these studies were generally carried out in fold- and trust-belts, the allochthony of the rotated limbs of the thin-skinned belts implied transport above a basal décollement plane located in the upper crust. Some examples of these thin-skinned oroclines will be given. However, in recent years oroclines have also been proposed as resulting from buckling of ribbon continents (e.g., Panama; D'Entrecasteaux) with the noteworthy Great Alaskan Terrane Wreck, as discussed by Stephen Johnston of the University of Victoria, as prime example. And oroclines of truly continental dimensions have been presented on the basis of paleomagnetic and structural data in Hercynian Europe and Asia (the Kazakhstan and Mongol-Okhotsk oroclines). Because most of the fold- and trust-belt oroclines contain thick carbonate formations; paleomagnetists frequently find that these have been remagnetized in geological episodes that are coeval with mountain building nearby in time and space. A connection between remagnetization and clay diagenesis is a possibility that is currently being investigated. If this is shown to be the case, the last word on oroclines will not have been printed.

Anatomy of a metamorphic core complex: seismic refraction/wide-angle reflection profiling in southeastern California and western Arizona

USGS Publications Warehouse

McCarthy, J.; Larkin, S.P.; Fuis, G.S.; Simpson, R.W.; Howard, K.A.

1991-01-01

The metamorphic core complex belt in southeastern California and western Arizona is a NW-SE trending zone of unusually large Tertiary extension and uplift. Midcrustal rocks exposed in this belt raise questions about the crustal thickness, crustal structure, and the tectonic evolution of the region. Three seismic refraction/wide-angle reflection profiles were collected to address these issues. The results presented here, which focus on the Whipple and Buckskin-Rawhide mountains, yield a consistent three-dimensiional image of this part of the metamorphic core complex belt. The final model consists of a thin veneer (<2 km) of upper plate and fractured lower plate rocks (1.5-5.5 km s-1) overlying a fairly homogeneous basement (~6.0 km s-1) and a localized high-velocity (6.4 km s -1) body situated beneath the western Whipple Mountains. A prominent midcrustal reflection is identified beneath the Whipple and Buckskin Rawhide mountains between 10 and 20km depth. -from Authors

Spatiotemporal analysis of brucellosis incidence in Iran from 2011 to 2014 using GIS.

PubMed

Pakzad, Reza; Pakzad, Iraj; Safiri, Saeid; Shirzadi, Mohammad Reza; Mohammadpour, Marzieh; Behroozi, Abbas; Sullman, Mark J M; Janati, Ali

2018-02-01

To investigate the distribution and trends associated with brucellosis incidence rates in Iran from 2011 to 2014. The reported incidence rates of brucellosis for the years 2011-2014 were collected and entered into GIS 10.1. The Cochran-Armitage test for linear trends, choropleth maps, hot-spot analysis, and high-low clustering analysis were used to investigate patterns of the disease over the study period and by season, and to identify high-risk areas and any clustering of the disease. The significance level was set at p<0.05. A total of 68493 cases of brucellosis were reported during the study period, giving an average brucellosis incidence rate for this period of 38.67/100000. In 2011, the highest rate of brucellosis was observed in Koohrang County of Chaharmahal-Bakhtiari Province, with 317/100 000. In the subsequent years, 2012-2014, Charuymaq County of East-Azerbaijan Province had incidence rates of 384, 534, and 583/100000, respectively. However, the incidence rate of the disease did not follow a linear trend (p<0.001). The maximum and minimum incidence rates of the disease occurred in mid-summer and mid-winter, respectively. The results of the hot-spot analysis showed that the distribution of the disease was highest in the mountainous areas of Iran, particularly along the Zagros mountain range and in most cities near the Zagros Mountains (p<0.01). In addition, the cluster analysis showed a clustering pattern in these high incidence areas (p<0.01). There were significant differences in the geographic distribution of brucellosis, with the incidence rates being highest in most of the cities in the west and north-west of the country. The incidence of this disease also increased during the summer. It is important to take these patterns into account when allocating resources to combat this disease and to ensure that health programs and other interventions focus on the areas of greatest need. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

44. VIEW OF SOUTHWEST CORNER OF DRYER ROOM. DRYER FOUNDATION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

44. VIEW OF SOUTHWEST CORNER OF DRYER ROOM. DRYER FOUNDATION AT BOTTOM OF VIEW, WITH 18 INCH REVERSIBLE BELT CONVEYOR (UPPER LEFT), AND 16 INCH BELT CONVEYOR FINES FEED TO CRUSHED OXIDIZED ORE BIN (CENTER TO UPPER RIGHT). DRYER EXHAUST IS BELOW FINES FEED BELT. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Archean sedimentation and tectonics in southern Africa

NASA Technical Reports Server (NTRS)

Kidd, W. S. F.

1984-01-01

Sequences in the Barberton Mountain Land greenstone belt (southern Africa) were examined to determine the nature of the sedimentary rocks, their tectonic implications, and their bearing on the present large-scale structural condition of the belt. Also assessed was whether there was evidence for a significant component of shallow-water-deposited sedimentary rocks in the parent materials of the Limpopo belt. The nature of a largehigh strain zone on the southern margin of the central Limpopo belt was examined.

Middle Devonian to Late Mississippian event stratigraphy of Overthrust belt region, western United States.

USGS Publications Warehouse

Sandberg, C.A.; Gutschick, R.C.; Johnson, J.G.; Poole, F.G.; Sando, W.J.

1986-01-01

Twenty eustatic and epeirogenic events mainly dated by conodonts are distinguished between the Middle Devonian and the lower Upper Mississippian in Great Basin, in Rocky Mountains and in the Overthrust belt regions.-Journal Editors

Appalachia Snow

Atmospheric Science Data Center

2014-05-15

... 7, 2002. The Appalachians are bounded by the Blue Ridge mountain belt along the east and the Appalachian Plateau along the west. ... tip, near the Great Smoky Mountains (the dark-colored range at lower right). The Multi-angle Imaging SpectroRadiometer observes ...

Man-induced transformation of mountain meadow soils of Aragats mountain massif (Armenia)

NASA Astrophysics Data System (ADS)

Avetisyan, M. H.

2018-01-01

The article considers issues of degradation of mountain meadow soils of the Aragats mountain massif of the Republic of Armenia and provides the averaged research results obtained for 2013 and 2014. The present research was initiated in the frames of long-term complex investigations of agroecosystems of Armenia’s mountain massifs and covered sod soils of high mountain meadow pasturelands and meadow steppe grasslands lying on southern slope of Mt. Aragats. With a purpose of studying the peculiarities of migration and transformation of flows of major nutrients namely carbon, nitrogen, phosphorus in study mountain meadow and meadow steppe belts of the Aragats massif we investigated water migration of chemical elements and regularities of their leaching depending on different belts. Field measurement data have indicated that organic carbon and humus in a heavily grazed plot are almost twice as low as on a control site. Lysimetric data analysis has demonstrated that heavy grazing and illegal deforestation have brought to an increase in intrasoil water acidity. The results generated from this research support a conclusion that a man’s intervention has brought to disturbance of structure and nutrient and water regimes of soils and loss of significant amounts of soil nutrients throughout the studied region.

Monarch (Danaus plexippus L. Nymphalidae) migration, nectar resources and fire regimes in the Ouachita Mountains of Arkansas

Treesearch

D. Craig Rudolph; Charles A. Ely; Richard R. Schaefer; J. Howard Williamson; Ronald E. Thill

2006-01-01

Monarchs (Danaus plexippus) pass through the Ouachita Mountains in large numbers in September and October on their annual migration to overwintering sites in the Transvolcanic Belt of central Mexico. Monarchs are dependent on nectar resources to fuel their migratory movements. In the Ouachita Mountains of west-central Arkansas migrating monarchs...

Conodonts of the western Paleozoic and Triassic belt, Klamath Mountains, California and Oregon

USGS Publications Warehouse

Irwin, William P.; Wardlaw, Bruce R.; Kaplan, T.A.

1983-01-01

Conodonts were extracted from 32 samples of limestone and 5 samples of chert obtained from the Western Paleozoic and Triassic belt of the Klamath Mountains province. Triassic conodonts were found in 17 samples, and late Paleozoic conodonts in 7 samples. Conodonts of the remaining 13 samples cannot be dated more closely than early or middle Paleozoic through Triassic. The late Paleozoic conodonts are restricted to the North Fork and Hayfork terranes. The Hayfork terrane also contains Early, Middle, and Late Triassic conodonts; mostly Neogondolella. Conodonts from samples of the Rattlesnake Creek terrane and the northern undivided part of the belt are all Late Triassic and are generally Epigondolella. The conodont data support the concept that many of the limestone bodies are olistoliths or tectonic blocks in melange. Color alteration of the conodonts indicates that the rocks of the Western Paleozoic and Triassic belt have been heated to temperatures between 300 degrees and 500 degrees C during regional tectonism.

Geologic evolution of the Akna Montes-Atropos Tessera region, Venus

NASA Astrophysics Data System (ADS)

Marinangeli, Lucia; Gilmore, Martha S.

2000-05-01

The investigated area comprises an arcuate mountain belt, Akna Montes, in Western Ishtar Terra, associated with an outboard plateau, Atropos Tessera, to the west and a volcanic plateau, Lakshmi Planum, to the east. Eight geologic units have been recognized on the basis of their geomorphic and structural characteristics as they appear on Magellan radar images. Our stratigraphic analysis shows that the geological evolution of the study area can be explained by four main steps: (1) formation of the older substrata of Atropos Tessera and Lakshmi, (2) extensive plains emplacement, (3) an orogenic phase including the formation of Akna Montes, and (4) local emplacement of younger plains. The tectonic evolution shows a deformational sequence characterized by contraction, shear, and topographic relaxation. This sequence is interpreted to be a consequence of the variation of crustal stresses and crustal thickening during orogenic events as observed for terrestrial high plateaus associated with a mountain belt (i.e., Himalaya and Tibet, Andes and Altiplano). In order to estimate the amount of crustal shortening associated with the Akna Montes, we considered two end-members for structural style of the mountain belt: a symmetric fold model and fault-bend fold model. The models are theoretical because terrestrial orogenic belts are often formed by a combination of different compressional structures. However, symmetric and fault-bend faults represent the minimum and maximum crustal shortening, respectively, and thus they do place bounds on the amount of strain recorded by Akna Montes. The first model yields a shortening value less than 1%, whereas a range of 17-34% is derived for the second model. The large difference between these values underscores the importance of fold geometries for estimating strain and to place constraints on geodynamic models for mountain belt formation. On the basis of our study we think that a combination of mantle downwelling and horizontal convergence may provide a good explanation of the geology and tectonics we observed in the Akna Montes-Atropos Tessera region.

Variations in the kinematics of deformation along the Zagros inclined transpression zone, Iran: Implications for defining a curved inclined transpression zone

NASA Astrophysics Data System (ADS)

Sarkarinejad, Khalil; Partabian, Abdolreza; Faghih, Ali

2013-03-01

The combination of inclined collision and plate boundary shape can control the nature of deformation and the sense of shear along a transpression zone. The present study investigated the effects of a boundary zone with curvilinear shape along a transpression zone on the kinematics of deformation. The kinematics of the Zagros transpression zone varies with the orientation of the zone boundary. Detailed structural and microstructural studies showed sinistral sense of shear on the southeastern part of the Zagros inclined transpression zone (Fars Arc), but dextral sense of shear on the northwestern part of the zone. It is inferred that the both senses of shear were developed coevally under a bulk general shear, regional-scale deformation along a curved inclined transpression miming the shape of the Fras Arc of the Zagros and the reentrant of the Bandar Abbas Syntaxis. The Zagros transpression zone formed by inclined continental collision between the Afro-Arabian continent and Iranian microcontinent.

Sedimentological constraints on the initial uplift of the West Bogda Mountains in Mid-Permian.

PubMed

Wang, Jian; Cao, Ying-Chang; Wang, Xin-Tong; Liu, Ke-Yu; Wang, Zhu-Kun; Xu, Qi-Song

2018-01-23

The Late Paleozoic is considered to be an important stage in the evolution of the Central Asian Orogenic Belt (CAOB). The Bogda Mountains, a northeastern branch of the Tianshan Mountains, record the complete Paleozoic history of the Tianshan orogenic belt. The tectonic and sedimentary evolution of the west Bogda area and the timing of initial uplift of the West Bogda Mountains were investigated based on detailed sedimentological study of outcrops, including lithology, sedimentary structures, rock and isotopic compositions and paleocurrent directions. At the end of the Early Permian, the West Bogda Trough was closed and an island arc was formed. The sedimentary and subsidence center of the Middle Permian inherited that of the Early Permian. The west Bogda area became an inherited catchment area, and developed a widespread shallow, deep and then shallow lacustrine succession during the Mid-Permian. At the end of the Mid-Permian, strong intracontinental collision caused the initial uplift of the West Bogda Mountains. Sedimentological evidence further confirmed that the West Bogda Mountains was a rift basin in the Carboniferous-Early Permian, and subsequently entered the Late Paleozoic large-scale intracontinental orogeny in the region.

Spatial distributing characteristics of land use in the southern slope of mid-Himalaya Mountains

NASA Astrophysics Data System (ADS)

Lu, Chen

2014-12-01

The southern slope of mid-Himalayan Mountains located in China's Qomolangma National Natural Reserve in Tibet Autonomous Region, is made up of several non-continuous valleys. The study collected the data including DEM(SRTM90m), 1/250,000 land use map(year 2000), 1/100 million vegetation types map ,satellite images of 4 typical valleys on Google Earth Planet Map. Made use of ArcGIS9.3 spatial analysis technology, analyzed into the 2 aspects— Mountain altitudinal belts and slope gradient of soil types of Qinghai-Tibet Plateau, so as to abtain the spatial distributing characteristics of farmland and grassland in the research areas. The conclusions indicates that: (1)no farmland below 2200m altitude, land use is influenced intensively by slope gradient factor in the altitude range of < 2500m; (2)it is in 2500m-3800m altitude range meanwhile on the 2 farming suitable slope gradient belts(<5°, 5-15°) that the very focus zone has got the relatively larger potential, suitability and yield of farming utilization; (3)on the 3 grazing suitable slope gradient belts(<5°,5-15°,15-35°), the respective fodder quantities of the 4 valleys has low differences. land use of the 4 valleys are intensively restricted by altitude and slope gradient factors so that cultivating and grazing activities take place widely on the farming unsuitable slope gradient belts(15-35°,>35°) and grazing unsuitable slope gradient belt(>35°), which is disadvantaged to ecological environmental protection and rational utilization of land resources.

The Conterminous United States Mineral Assessment Program; background information to accompany folio of geologic, geophysical, geochemical, mineral-occurrence, mineral-resource potential, and mineral-production maps of the Charlotte 1 degree x 2 degrees Quadrangle, North Carolina and South Carolina

USGS Publications Warehouse

Gair, Jacob Eugene; Goldsmith, Richard; Daniels, D.L.; Griffitts, W.R.; DeYoung, J.H.; Lee, M.P.

1986-01-01

This Circular and the folio of separately published maps described herein are part of a series of reports compiled under the Conterminous United States Mineral Assessment Program ICUSMAP). The folio on the Charlotte 1 degree ? 2 degree quadrangle, North Carolina and South Carolina, includes (1) a geologic map; (2) four geophysical maps; (3) geochemical maps for metamorphic heavy minerals, copper, lead and artifacts, zinc, gold, tin, beryllium, niobium, tungsten, molybdenum, titanium, cobalt, lithium, barium, antimony-arsenic-bismuth-cadmium, thorium-cerium-monazite, and limonite; (4) mineral-occurrence maps for kyanite-sillimanite-lithium-mica-feldspar-copper-lead-zinc, gold-quartz-barite-fluorite, iron-thorium-tin-niobium, and construction materials-gemstones; (5) mineral-resource potential maps for copper-lead-zinc-combined base metals, gold, tin-tungsten, beryllium-molybdenum-niobium, lithium-kyanite- sillimanitebarite, thorium (monazite)-uranium, and construction materials; and (6) mineral-production maps. The Charlotte quadrangle is mainly within the Piedmont physiographic province and extends from near the Coastal Plain on the southeast into the Blue Ridge province on the northwest for a short distance. Parts of six lithotectonic belts are present--the Blue Ridge, the Inner Piedmont, the Kings Mountain belt, the Charlotte belt, the Carolina slate belt, and the Wadesboro basin. Igneous, metamorphic, and sedimentary rocks are present and range in age from Proterozoic to Mesozoic; alluvial sediments of Quaternary age occur along rivers and larger streams. Rocks of the Blue Ridge include Middle Proterozoic granitoid gneiss intruded by Late Proterozoic granite; Late Proterozoic paragneiss, schist, and other metasedimentary and metavolcaniclastic rocks (Ashe and Grandfather Mountain Formations); Late Proterozoic and Early Cambrian metasedimentary rocks (Chilhowee Group); and Early Cambrian sedimentary rocks (Shady Dolomite). Paleozoic granites intrude the Proterozoic rocks. The Inner Piedmont contains noncarbonate metasedimentary rocks and amphibolite of medium to high metamorphic grades. These rocks are intruded by the Toluca Granite and Henderson Gneiss of Cambrian and Ordovician(?) age. The Charlotte belt consists largely of Late Proterozoic to Late Paleozoic granitic and gabbroic plutonic rocks and intervening enclaves of metasedimentary and metavolcanic rocks. The narrow Kings Mountain belt is located between the Charlotte and the Inner Piedmont belts and contains mainly Late Proterozoic metasedimentary rocks and plutonic rocks similar to those of the Charlotte belt. The Carolina slate belt, flanking the Charlotte belt on the east, contains weakly metamorphosed volcanic and sedimentary rocks. East of this belt, at the southeast corner of the quadrangle, is the Wadesboro basin, which has continental sedimentary rocks of Triassic age. Layered rocks westward from and in the Charlotte belt are complexly folded, are steeply dipping, and in the Blue Ridge and Inner Piedmont are contained within major thrust slices. Rocks of the Carolina slate belt are gently folded. Rocks of the Wadesboro basin occur in downfaulted blocks. The geophysical surveys of the Charlotte quadrangle consisted of Bouguer gravity, aeromagnetic, and aeroradioactivity surveys and used both newly obtained data and information from prior work. The gravity survey disclosed a distinct northeast-trending, northwest-decreasing gradient, which is part of the major gravity gradient that extends the length of the Appalachian Mountains. Granitic plutons of the Charlotte belt, in particular, are marked by gravity lows, and gabbro plutons, by highs. Several of the geologic belts display distinct magnetic character. The aeroradioactivity surveys showed a swath of consistently high gamma-ray intensities along the central part of the Inner Piedmont belt; these high intensities correspond to the so-called monazite belt. Oval patterns of high gamma-ray readi

Isotopic data for Late Cretaceous intrusions and associated altered and mineralized rocks in the Big Belt Mountains, Montana

USGS Publications Warehouse

du Bray, Edward A.; Unruh, Daniel M.; Hofstra, Albert H.

2017-03-07

The quartz monzodiorite of Mount Edith and the concentrically zoned intrusive suite of Boulder Baldy constitute the principal Late Cretaceous igneous intrusions hosted by Mesoproterozoic sedimentary rocks of the Newland Formation in the Big Belt Mountains, Montana. These calc-alkaline plutonic masses are manifestations of subduction-related magmatism that prevailed along the western edge of North America during the Cretaceous. Radiogenic isotope data for neodymium, strontium, and lead indicate that the petrogenesis of the associated magmas involved a combination of (1) sources that were compositionally heterogeneous at the scale of the geographically restricted intrusive rocks in the Big Belt Mountains and (2) variable contamination by crustal assimilants also having diverse isotopic compositions. Altered and mineralized rocks temporally, spatially, and genetically related to these intrusions manifest at least two isotopically distinct mineralizing events, both of which involve major inputs from spatially associated Late Cretaceous igneous rocks. Alteration and mineralization of rock associated with the intrusive suite of Boulder Baldy requires a component characterized by significantly more radiogenic strontium than that characteristic of the associated igneous rocks. However, the source of such a component was not identified in the Big Belt Mountains. Similarly, altered and mineralized rocks associated with the quartz monzodiorite of Mount Edith include a component characterized by significantly more radiogenic strontium and lead, particularly as defined by 207Pb/204Pb values. The source of this component appears to be fluids that equilibrated with proximal Newland Formation rocks. Oxygen isotope data for rocks of the intrusive suite of Boulder Baldy are similar to those of subduction-related magmatism that include mantle-derived components; oxygen isotope data for altered and mineralized equivalents are slightly lighter.

Tectonic evolution of the Satpura Mountain Belt: A critical evaluation and implication on supercontinent assembly

NASA Astrophysics Data System (ADS)

Mohanty, S.

2010-11-01

The Satpura Mountain Belt (also referred as Central Indian Tectonic Zone in recent literature) forms an important morphotectonic unit in the central part of India. Some of the recent workers have reported an orogenic event at ˜1000-900 Ma (termed "Sausar orogeny") which led to amalgamation of the North Indian Block and the South Indian Block and formation of the Satpura Mountain Belt. In this model the stratigraphic relations of two important lithostratigraphic units on either side of the Satpura Mountain Belt (the Sausar Group in the south and the Vindhyan Supergroup on the north) are suggested to be revised from previously held ideas. Critical analyses of available published work in the region to assess the status of the Sausar Group vis a vis the Vindhyan Supergroup was carried out. It is found that the ideas proposed by the recent workers stem from an earlier interpretation that the Sausar Group has monocyclic evolution and the earliest fabric in the Sausar Group is marked by a schistosity with EW strike. Re-mapping of the gneissic rocks and adjacent matasedimentary rocks of Khawasa, Deolapar, and Kandri-Mansar areas revealed presence of gneissic rocks and granulites of two generations, and of four phases of superposed deformations in the metasediments and gneisses. The older gneisses and granulites constitute the basement over which the rocks of the Sausar Group were deposited; and the younger gneisses developed by metamorphism and migmatisation of the rocks of the Sausar Group. The latter types are found in the Khawasa-Ramakona areas. Contrary to the belief of the recent workers that no volcanic activity is present in the Sausar Group, volcanic rocks marked by amygdular basic flows and tuffs have been mapped from different parts of the Sausar Group. Migmatisation and metamorphism of these volcanic rocks (of the Sausar Group) have given rise to amphibolites and granulites in Khawasa and Ramakona areas. Therefore, the use of fabric patterns in these areas to suggest that the granulite facies metamorphism in the Ramakona-Katangi granulite domain was pre-Sausar in age is debatable. Available geochronological data of the Satpura Mountain Belt and its eastward continuation into the Chhotanagpur Gneiss terrain indicate that the basement and cover rocks of these areas were subjected to multiple deformation and metamorphic episodes of similar style and nature. The earliest deformation and metamorphism of the rocks of the Sausar Group and its equivalent rocks to the east took place at ˜2100-1900 Ma. The regional EW trend of the belt developed during the second deformation at ˜1800-1700 Ma and again at ˜1600-1500 Ma. This deformation was accompanied by migmatisation and granulite facies metamorphism in the northern domain of the Sausar Belt and in the Chhotanagpur Gneiss region. Late phase low intensity deformations in the region were associated with thermal events at ˜1100-1000 Ma and ˜900-800 Ma. The ˜EW trending fabric, referred as "Satpura orogenic trend" in Indian literature marks a major compressional tectonic event, developed during the second deformation of the Sausar Group. This has its counter part in Western Australia as the Capricorn orogeny (˜1780-1830 Ma). The development of the Satpura Mountain Belt during the Grenvillian orogeny is ruled out from the synthesis of event stratigraphic data of the region and from its comparison with the Western Australian Craton.

New Criteria to Assess Seismic and Rock Burst Hazard in Coal Mines / Nowe Kryteria Dla Oceny Zagrożenia Sejsmicznego I Tąpaniami W Kopalniach Węgla Kamiennego

NASA Astrophysics Data System (ADS)

Mutke, Grzegorz; Dubiński, Józef; Lurka, Adam

2015-09-01

The paper presents new criteria of seismic and rock burst hazard assessment in Polish hard coal mines where longwall mining system is common practice. The presented criteria are based on the results of continuous recording of seismic events and analysis of selected seismological parameters: spatial location of seismic event in relation to mining workings, seismic energy, seismic energy release per unit coal face advance, b-value of Gutenberg-Richter law, seismic energy index EI, seismic moment M0, weighted value of peak particle velocity PPVW. These parameters are determined in a moving daily time windows or time windows with fixed number of seismic tremors. Time changes of these parameters are then compared with mean value estimated in the analyzed area. This is the basis to indicate the zones of high seismic and rock burst hazard in specific moment in time during mining process. Additionally, the zones of high seismic and rock burst hazard are determined by utilization of passive seismic tomography method. All the calculated seismic parameters in moving time windows are used to quantify seismic and rock burst hazard by four level scales. In practice, assessment of seismic and rock burst hazard is used to make daily decision about using rock burst prevention activities and correction of further exploitation of monitored coal panel. Zagrożenie sejsmiczne i związane z nim genetycznie zagrożenie tąpnięciem w dalszym ciągu należą do najgroźniejszych zagrożeń naturalnych występujących w polskich kopalniach węgla kamiennego. W ostatnich latach w kopalniach Górnośląskiego Zagłębia Węglowego (GZW) rocznie rejestrowano 1000÷1500 wstrząsów o energii sejsmicznej Es ≥ 1·105J (magnituda lokalna ML ≥ 1.7), a najsilniejsze z nich osiągały energię Es = 4 ·109J (ML = 4.1). W latach 1991-2010 odnotowano w GZW 101 tąpnięć, z których około 66% miało miejsce w wyrobiskach chodnikowych, powodując ich uszkodzenia lub całkowite zniszczenie, a w niektórych przypadkach również wypadki śmiertelne. Przedstawiono podstawowe parametry sejsmologiczne stosowane w kraju i w świecie do oceny zagrożenia sejsmicznego. Opisano podstawowe zasady metody kompleksowej oceny stanu zagrożenia tąpnięciem, w skład której wchodzi metoda sejsmologiczna bieżącej (pomiarowej) oceny stanu zagrożenia. Od wielu lat, wraz z ciągłym rozwojem bazy aparaturowej i możliwości w zakresie cyfrowej rejestracji sejsmogramów oraz przetwarzania i interpretacji danych pomiarowych wzrasta znaczenie metod sejsmicznych, które są dzisiaj powszechnie stosowane w polskich kopalniach zagrożonych tąpaniami. Ciągła obserwacja zjawisk sejsmicznych indukowanych w trakcie rozwoju procesu eksploatacji pokładów węgla umożliwiła, w oparciu o zgromadzoną bazę danych, opracowywanie nowych kryteriów zagrożenia sejsmicznego oraz zagrożenia tąpnięciem, które winny wyraźnie poprawić efektywność metody sejsmologii górniczej. W artykule przedstawiono nowe kryteria oceny stanu bieżącego zagrożenia tąpaniami zaproponowane do stosowania w polskich kopalniach węgla kamiennego, które prowadzą eksploatację systemem ścianowym. Kryteria te są oparte na wynikach ciągłej rejestracji sejsmologicznej, połączonej z bieżącą analizą zarejestrowanych wstrząsów i obliczaniem wybranych parametrów sejsmologicznych. Parametry te to położenie ognisk wstrząsów w stosunku do wyrobisk eksploatacyjnych, energia sejsmiczna wstrząsów, suma energii sejsmicznej wyzwolona na każde 5m postępu ściany eksploatacyjnej, wartość wagowanego parametru amplitudy prędkości drgań PPVW, moment sejsmiczny M0, indeks energii EI oraz parametr b rozkładu wstrząsów według relacji Gutenberga-Richtera. Wartości powyższych parametrów są określane dla każdej doby lub w przesuwających się co dobę oknach czasowych lub oknach zawierających określoną liczbę wstrząsów, a następnie porównywane, raz na dobę, z ich wartościami średnimi wyznaczonymi dla obserwowanego rejonu eksploatacji lub z opracowanymi wartościami kryterialnymi. W ten sposób wyznaczane są, dla danego momentu czasu, strefy w których możne wystąpić potencjalnie wysokie zagrożenie sejsmiczne i zagrożenie tąpaniami. Ponadto, w strefach o podwyższonym naprężeniu oraz w strefach o skomplikowanej sytuacji górniczo-geologicznej, charakteryzujących się zaszłościami starej eksploatacji oraz zaburzeniami geologicznycmi, wykonywane są dodatkowo doraźne obliczenia pola prędkości fal sejsmicznych z wykorzystaniem metody tomografii pasywnej. Należy podkreślić, że wszystkie obliczane wartości powyższych parametrów są skwantyfikowane i określają wartości kryterialne w czterostopniowej skali oceny stanu zagrożenia sejsmicznego i zagrożenia tąpnięciem (tabela 2). Stopnie zagrożenia zostały skwantyfikowane w oparciu wyniki pomiarów sejsmologicznych wykonywanych na bieżąco w sposób ciągły i są wyrażone w formie kryteriów empirycznych, opracowanych na podstawie analizy dużego zbioru danych sejsmicznych oraz obserwacji makroskopowych w wyrobiskach górniczych. Należy podkreślić, że w czasie występowania wysokich stanów zagrożenia sejsmicznego lub zagrożenia tąpnięciem, opracowana metoda pozwala wyznaczyć obszary o podwyższonym stanie zagrożenia, umożliwiając zaprojektowanie i zastosowanie odpowiedniej w miejscu i czasie profilaktyki tąpaniowej. Ważnym aspektem w ocenie stanu zagrożenia sejsmicznego i tąpaniami jest problem ciągłego przemieszczania się stref zagrożenia (stref podwyższonych naprężeń) w czasie prowadzonej eksploatacji. Dla uchwycenia nie tylko miejsc potencjalnego zagrożenia, ale również określenia w jakim momencie czasu pojawia się strefa potencjalnego zagrożenia, zaproponowano analizę parametrów kryterialnych w przesuwających się oknach czasowych z dobowym raportowaniem wyników. W artykule przedstawiono dotychczasowe kryteria oceny stanu zagrożenia tąpnięciem - tabela 1 (Barański i in., 2007), stosowane aktualnie przez większość kopalń w polskim górnictwie węglowym. Kryteria te w części przypadków nie prowadziły do zadawalających i w pełni wiarygodnych wskazań, ze względu na małą liczbę analizowanych parametrów sejsmologicznych oraz brak sekwencyjnej analizy ich zmian w czasie prowadzonej eksploatacji. Wady te uwzględnia nowe podejście metodyczne do oceny stanu zagrożenia. Nowe kryteria oceny stanu zagrożenia sejsmicznego i zagrożenia tąpnięciem przedstawiono w tabeli 2. Zakwalifikowanie do określonego stanu zagrożenia wymaga spełnienia wartości kryterialnych przez więcej niż połowę parametrów sejsmicznych, przypisanych do określonego stanu zagrożenia i rodzaju wyrobiska. Skuteczność przedstawionych nowych kryteriów oceny stanu sejsmicznego i zagrożenia tąpnięciem, opartych o sekwencyjną analizę wybranych parametrów kryterialnych w przemieszczających się co dobę oknach czasowych, została pokazana na przykładach obliczeniowych rzeczywistych sytuacji pomiarowych uzyskanych podczas eksploatacji pokładu węgla 510 ścianą nr. 6 oraz pokładu 503 ścianą nr. 3 w KWK Bobrek-Centrum. Przeprowadzono dyskusję opracowanych kryteriów dowodząc, że stosowanie do oceny stanu zagrożenia tąpaniami różnych parametrów wstrząsów jest niezbędne, aby na bieżąco obserwować to zagrożenie w zależności od różnych mechanizmów wstrząsów i dla różnych sytuacji górniczo-geologicznych. Analiza jednego parametru kryterialnego może często doprowadzić do błędnych wniosków i niskiej wiarygodności wykonanej oceny stanu zagrożenia. Z tej przyczyny w najnowszej wersji metody sejsmologicznej zaproponowanej do stosowania w polskich kopalniach węgla kamiennego, uwzględniono pięć niezależnych parametrów sejsmologicznych opisanych w tabeli 2.

> Exploring the Scandinavian Mountain Belt by Deep Drilling (COSC)

NASA Astrophysics Data System (ADS)

Juhlin, C.; Gee, D. G.; Lorenz, H.; Pascal, C.; Pedersen, K.; Tsang, C.-F.

2012-04-01

The Collisional Orogeny in the Scandinavian Caledonides (COSC) project proposes to drill two fully cored scientific boreholes, both to c. 2.5 km depth, in the Swedish Caledonides, one near the town of Åre (COSC 1) and the other further east (COSC 2). Together they will provide a c. 5 km deep high-resolution mid-crustal section through this major mid-Palaeozoic orogen. Main project objectives include (i) improved understanding of mountain building processes (orogeny), (ii) investigation of the geothermal gradient and its response to palaeoclimatic influences, (iii) the hydrogeological-hydrochemical state of the mountain belt, (iv) the deep biosphere in the metamorphic rocks and crystalline basement, and (v) calibration of surface geophysics and geology. The Caledonide Orogen is comparable in size and many other respects to today's Himalayan mountain belt. Silurian collision with underthrusting of the paleo-continent Baltica below Laurentia resulted in widespread formation of eclogite. Major allochthons were transported many hundreds of kilometers onto the Baltoscandian Platform, including high-grade metamorphic rocks and migmatites which were generated during continental margin subduction and emplaced ductilely at mid-crustal levels. COSC will provide detailed insight into mid-Palaeozoic mountain building processes and further our understanding of past, present and future orogen dynamics. Located in a key-area for Caledonian geology, it is close to a major geophysical transect across the mountain belt which has been complemented recently with high-resolution reflection seismics and aerogeophysics for site-selection. The COSC research program is being developed by five working groups, geology, geophysics, geothermics, hydrogeology and microbiology. It has direct relevance for society by improving our understanding of mountain building processes, hydrological-hydrochemical regimes in mountain areas and Precambrian shields, deep subsurface conditions for underground engineering, ore genesis and assessment of geothermal potential. After a general scientific workshop supported by ICDP in 2010, the hydrogeological aspects of deep drilling were the topic of a separate workshop last year; orogen dynamics will provide a focus at EGU; and geothermics research will be addressed at a workshop in Autumn 2012. The geothermics workshop will be announced on the ICDP homepage. Partial funding for the drilling has been achieved through national sources and ICDP. Additional funding (c. 500000€) is being sought to allow drilling to commence in 2013. Scientific and financial partners, both from academia and industry, are welcome to the project. The presentation will review the current status of the COSC project and the research leading up to the site selection for COSC 1.

Analysis of the stress field and strain rate in Zagros-Makran transition zone

NASA Astrophysics Data System (ADS)

Ghorbani Rostam, Ghasem; Pakzad, Mehrdad; Mirzaei, Noorbakhsh; Sakhaei, Seyed Reza

2018-01-01

Transition boundary between Zagros continental collision and Makran oceanic-continental subduction can be specified by two wide limits: (a) Oman Line is the seismicity boundary with a sizeable reduction in seismicity rate from Zagros in the west to Makran in the east; and (b) the Zendan-Minab-Palami (ZMP) fault system is believed to be a prominent tectonic boundary. The purpose of this paper is to analyze the stress field in the Zagros-Makran transition zone by the iterative joint inversion method developed by Vavrycuk (Geophysical Journal International 199:69-77, 2014). The results suggest a rather uniform pattern of the stress field around these two boundaries. We compare the results with the strain rates obtained from the Global Positioning System (GPS) network stations. In most cases, the velocity vectors show a relatively good agreement with the stress field except for the Bandar Abbas (BABS) station which displays a relatively large deviation between the stress field and the strain vector. This deviation probably reflects a specific location of the BABS station being in the transition zone between Zagros continental collision and Makran subduction zones.

Lifespan of mountain ranges scaled by feedbacks between landsliding and erosion by rivers.

PubMed

Egholm, David L; Knudsen, Mads F; Sandiford, Mike

2013-06-27

An important challenge in geomorphology is the reconciliation of the high fluvial incision rates observed in tectonically active mountain ranges with the long-term preservation of significant mountain-range relief in ancient, tectonically inactive orogenic belts. River bedrock erosion and sediment transport are widely recognized to be the principal controls on the lifespan of mountain ranges. But the factors controlling the rate of erosion and the reasons why they seem to vary significantly as a function of tectonic activity remain controversial. Here we use computational simulations to show that the key to understanding variations in the rate of erosion between tectonically active and inactive mountain ranges may relate to a bidirectional coupling between bedrock river incision and landslides. Whereas fluvial incision steepens surrounding hillslopes and increases landslide frequency, landsliding affects fluvial erosion rates in two fundamentally distinct ways. On the one hand, large landslides overwhelm the river transport capacity and cause upstream build up of sediment that protects the river bed from further erosion. On the other hand, in delivering abrasive agents to the streams, landslides help accelerate fluvial erosion. Our models illustrate how this coupling has fundamentally different implications for rates of fluvial incision in active and inactive mountain ranges. The coupling therefore provides a plausible physical explanation for the preservation of significant mountain-range relief in old orogenic belts, up to several hundred million years after tectonic activity has effectively ceased.

Basal accretion, a major mechanism for mountain building in Taiwan revealed in rock thermal history

NASA Astrophysics Data System (ADS)

Chen, Chih-Tung; Chan, Yu-Chang; Lo, Ching-Hua; Malavieille, Jacques; Lu, Chia-Yu; Tang, Jui-Ting; Lee, Yuan-Hsi

2018-02-01

Deep tectonic processes are key integral components in the evolution of mountain belts, while observations of their temporal development are generally obscured by thermal resetting, retrograde alteration and structural overprinting. Here we recorded an integrated rock time-temperature history for the first time in the pro-wedge part of the active Taiwan arc-continent collision starting from sedimentation through cleavage-forming state to its final exhumation. The integrated thermal and age results from the Raman Spectroscopy of Carbonaceous Material (RSCM) method, zircon U-Pb laser ablation dating, and in-situ40Ar/39Ar laser microprobe dating suggest that the basal accretion process was crucial to the development of the Taiwanese orogenic wedge. The basal accretion process commenced early in the mountain building history (∼6 Ma) and gradually migrated to greater depths, as constrained by persistent plate convergence and cleavage formation under nearly isothermal state at similar depths until ∼ 2.5 Ma recorded in the early-accreted units. Such development essentially contributed to mountain root growth by the increased depth of the wedge detachment and the downward wedge thickening during the incipient to full collision stages in the Taiwan mountain belt.

Orogen-Wide InSAR Time Series for Detecting Deformation Sources: The Zagros and Makran of Southern Iran

NASA Astrophysics Data System (ADS)

Lohman, R. B.; Barnhart, W. D.

2011-12-01

We present interferometric synthetic aperture radar (InSAR) time series maps that span the eastern Zagros (Fars Arc) collisional belt and western Makran accretionary prism of Southern Iran. Given the upcoming availability of large volumes of SAR data from new platforms, such as Sentinel 1 and potentially DESDynI, we explore computationally efficient approaches for extracting deformation time series when the signal of interest is small compared to the level of noise in individual interferograms. We use 12 descending and 2 ascending multi-frame (2-4 frames) Envisat tracks and 2 ascending ALOS tracks spanning 2003-2010 and 2006-2010. We implement a linear inversion, similar to the Small Baseline Subset (SBaS) technique, to derive surface displacements at individual acquisition dates from trees of interferograms with perpendicular baselines less than 350m for Envisat and 1500m for ALOS pairs. This spatially extensive dataset allows us to investigate several attributes of interferometry that vary spatially and temporally over large distances, including changes in phase coherence relative to elevation and relief as well as land use. Through synthetic tests and observed data, we explore various sources of potential error in calculation of time series, including variable coherence of pixels between interferograms in a single track, ambiguities in phase unwrapping, and orbital ramp estimation over scenes with variable correlated noise structure. We present examples of detected signals with both temporally variable characteristics and small magnitudes, including surface/subsurface salt deformation, aseismic deformation across Minab-Zendan-Palami strike-slip zone, and subsidence due to hydrocarbon extraction.

The Idaho cobalt belt

USGS Publications Warehouse

Bookstrom, Arthur A.

2013-01-01

The Idaho cobalt belt (ICB) is a northwest-trending belt of cobalt (Co) +/- copper (Cu)-bearing deposits and prospects in the Salmon River Mountains of east-central Idaho, U.S.A. The ICB is about 55 km long and 10 km long in its central part, which contains multiple strata-bound ore zones in the Blackbird mine area. The Black Pine and Iron Creek Co-Cu prospects are southeast of Blackbird, and the Tinkers Pride, Bonanza Copper, Elk Creek, and Salmon Canyon Copper prospects are northwest of Blackbird.

Uniquely Acquired Vintage Seismic Reflection Data Reveal the Stratigraphic and Tectonic History of the Montana Disturbed Belt, USA

NASA Astrophysics Data System (ADS)

Speece, M. A.; Link, C. A.; Stickney, M.

2011-12-01

In 1983 and 1984 Techco of Denver, Colorado, acquired approximately 302 linear kilometers of two-dimensional (2D) seismic reflection data in Flathead and Lake Counties, Montana, USA, as part of an initiative to identify potential drilling targets beneath the Swan and Whitefish Mountain Ranges and adjacent basins of northwestern Montana. These seismic lines were collected in the Montana Disturbed Belt (MDB) or Montana thrust belt along the western edge of Glacier National Park in mountainous terrain with complicated subsurface structures including thrust faults and folds. These structures formed during the Laramide Orogeny as sedimentary rocks of the Precambrian Belt Supergroup were thrust eastward. Later, during the Cenozoic, high-angle normal faults produced prominent west-facing mountain scarps of the Mission, Swan and Whitefish mountains. The 1983 data set consisted of two profiles of 24-fold (96-channels) Vibroseis data and four profiles of 24-fold (96-channels) helicopter-assisted dynamite data. The dynamite data were collected using the Poulter Method in which explosives were placed on poles and air shots were recorded. The 1983 dynamite profiles extend from southwest to northeast across the Whitefish Mountain Range to the edge of Glacier National Park and the Vibroseis data were collected along nearby roadways. The 1984 data set consists of four profiles of 30-fold (120-channels) helicopter-assisted dynamite data that were also collected using the Poulter Method. The 1984 profiles cross the Swan Mountain Range between Flathead Lake and Glacier National Park. All of these data sets were recently donated to Montana Tech and subsequently recovered from nine-track tape. Conventionally processed seismic stacked sections from the 1980s of these data show evidence of a basement decollement that separates relatively undeformed basement from overlying structures of the MDB. Unfortunately, these data sets have not been processed using modern seismic processing techniques including linear noise suppression of the air wave and ground roll, refraction statics, and prestack migration. Reprocessing of these data using state-of-the-art seismic reflection processing techniques will provide a detailed picture of the stratigraphy and tectonic framework for this region. Moreover, extended correlations of the Vibroseis records to Moho depths might reveal new insights on crustal thickness and provide a framework for understanding crustal thickening during the Laramide Orogeny as well as later Cenozoic extension.

Nutrient status in soil of Ski runs in the sub-alpine belt of Uludag Mountain, Bursa, Turkey.

PubMed

Guleryuz, Gurcan; Kirmizi, Serap; Arslan, Hulya

2010-01-01

Large areas of land are disturbed in sensitive bio-diverse mountain environments by Skiruns. Restoration of vegetation on such disturbed mountain sites may be hampered by soil degradation but the severity and nature of the constraints is not well understood. This study was designed to compare the water holding and nutritional status of soil in three Ski runs which had different construction dates and disturbance levels, and the adjacent undisturbed site in the Abies bommuelleriana forest community in the sub-alpine belt of Uludag Mountain (Bithynian Olympus). The values of soil parameters were depressed in proportion to the disturbance level. Water holding capacity (WHC), total nitrogen (N), organic carbon (C) and calcium (Ca2+), magnesium (Mg2+) and potassium (K+) contents (mg kg(-1) dry weight) of soils in the Ski run which had the highest disturbance level were lower than that of the undisturbed adjacent sites. However the results indicated that the soil parameters were less degraded when secondary vegetation was growing on the disturbed areas.

Flexural bending of the Zagros foreland basin

NASA Astrophysics Data System (ADS)

Pirouz, Mortaza; Avouac, Jean-Philippe; Gualandi, Adriano; Hassanzadeh, Jamshid; Sternai, Pietro

2017-09-01

We constrain and model the geometry of the Zagros foreland to assess the equivalent elastic thickness of the northern edge of the Arabian plate and the loads that have originated due to the Arabia-Eurasia collision. The Oligo-Miocene Asmari formation, and its equivalents in Iraq and Syria, is used to estimate the post-collisional subsidence as they separate passive margin sediments from the younger foreland deposits. The depth to these formations is obtained by synthesizing a large database of well logs, seismic profiles and structural sections from the Mesopotamian basin and the Persian Gulf. The foreland depth varies along strike of the Zagros wedge between 1 and 6 km. The foreland is deepest beneath the Dezful embayment, in southwest Iran, and becomes shallower towards both ends. We investigate how the geometry of the foreland relates to the range topography loading based on simple flexural models. Deflection of the Arabian plate is modelled using point load distribution and convolution technique. The results show that the foreland depth is well predicted with a flexural model which assumes loading by the basin sedimentary fill, and thickened crust of the Zagros. The model also predicts a Moho depth consistent with Free-Air anomalies over the foreland and Zagros wedge. The equivalent elastic thickness of the flexed Arabian lithosphere is estimated to be ca. 50 km. We conclude that other sources of loading of the lithosphere, either related to the density variations (e.g. due to a possible lithospheric root) or dynamic origin (e.g. due to sublithospheric mantle flow or lithospheric buckling) have a negligible influence on the foreland geometry, Moho depth and topography of the Zagros. We calculate the shortening across the Zagros assuming conservation of crustal mass during deformation, trapping of all the sediments eroded from the range in the foreland, and an initial crustal thickness of 38 km. This calculation implies a minimum of 126 ± 18 km of crustal shortening due to ophiolite obduction and post-collisional shortening.

Seismic anisotropy and mantle creep in young orogens

USGS Publications Warehouse

Meissner, R.; Mooney, W.D.; Artemieva, I.

2002-01-01

Seismic anisotropy provides evidence for the physical state and tectonic evolution of the lithosphere. We discuss the origin of anisotropy at various depths, and relate it to tectonic stress, geotherms and rheology. The anisotropy of the uppermost mantle is controlled by the orthorhombic mineral olivine, and may result from ductile deformation, dynamic recrystallization or annealing. Anisotropy beneath young orogens has been measured for the seismic phase Pn that propagates in the uppermost mantle. This anisotropy is interpreted as being caused by deformation during the most recent thermotectonic event, and thus provides information on the process of mountain building. Whereas tectonic stress and many structural features in the upper crust are usually orientated perpendicular to the structural axis of mountain belts, Pn anisotropy is aligned parallel to the structural axis. We interpret this to indicate mountain-parallel ductile (i.e. creeping) deformation in the uppermost mantle that is a consequence of mountain-perpendicular compressive stresses. The preferred orientation of the fast axes of some anisotropic minerals, such as olivine, is known to be in the creep direction, a consequence of the anisotropy of strength and viscosity of orientated minerals. In order to explain the anisotropy of the mantle beneath young orogens we extend the concept of crustal 'escape' (or 'extrusion') tectonics to the uppermost mantle. We present rheological model calculations to support this hypothesis. Mountain-perpendicular horizontal stress (determined in the upper crust) and mountain-parallel seismic anisotropy (in the uppermost mantle) require a zone of ductile decoupling in the middle or lower crust of young mountain belts. Examples for stress and mountain-parallel Pn anisotropy are given for Tibet, the Alpine chains, and young mountain ranges in the Americas. Finally, we suggest a simple model for initiating mountain parallel creep.

Hydrological Dynamics In High Mountain Catchment Areas of Central Norway

NASA Astrophysics Data System (ADS)

Löffler, J.; Rössler, O.

Large-scaled landscape structure is regarded as a mosaic of ecotopes where pro- cess dynamics of water and energy fluxes are analysed due to its effects on ecosys- tem functioning. The investigations have been carried out in the continental most Vågå/Oppland high mountains in central Norway since 1994 (LÖFFLER WUN- DRAM 1999, 2000, 2001). Additionally, comparable investigations started in 2000 dealing with the oceanic high mountain landscapes on same latitudes (LÖFFLER et al. 2001). The theoretical and methodological framework of the project is given by the Landscape-Ecological Complex Analysis (MOSIMANN 1984, 1985) and its variations due to technical and principle methodical challenges in this high moun- tain landscape (KÖHLER et al. 1994, LÖFFLER 1998). The aim of the project is to characterize high mountain ecosystem structure, functioning and dynamics within small catchment areas, that are chosen in two different altitudinal belts each in the eastern continental and the western oceanic region of central Norway. In the frame of this research project hydrological and meteorological measurements on ground water, percolation and soil moisture dynamics as well as on evaporation, air humidity and air-, surface- and soil-temperatures have been conducted. On the basis of large-scaled landscape-ecological mappings (LÖFFLER 1997) one basic meteorological station and several major data logger run stations have been installed in representative sites of each two catchment areas in the low and mid alpine belts of the investigation re- gions (JUNG et al. 1997, LÖFFLER WUNDRAM 1997). Moreover, spatial differ- entiations of groundwater level, soil moisture and temperature profiles have been in- vestigated by means of hand held measurements at different times of the day, during different climatic situations and different seasons. Daily and annual air-, surface- and soil-temperature dynamics are demonstrated by means of thermoisopleth-diagrams for different types of ecotopes of the different altitudinal belts. The local differences of temperature dynamics are illustrated in a map as an example of the low alpine al- titudinal belt showing a 4-dimensional characterization (in space and time) of high mountain ecosystem functioning. Hydrological aspects derived from those results are presented showing the large-scaled hydrological dynamics of high mountain catch- ment basins in central Norway. The results of the process analysis of hydrological dynamics in the central Norwegian high mountains are discussed within the frame of 1 investigations on altitudinal changes of mountain ecosystem structure and function- ing (LÖFFLER WUNDRAM [in print]). The poster illustrates the theoretical and methodological conception, methods and techniques, examples from complex data material as well as general outcomes of the project (RÖSSLER [in prep.]. 2

47. VIEW OF FEED LEVEL, CRUSHED OXIDIZED ORE BIN FROM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

47. VIEW OF FEED LEVEL, CRUSHED OXIDIZED ORE BIN FROM EAST. THE 18 INCH BELT CONVEYOR FEED IS AT CENTER, WITH DRIVE GEAR. THE 16 INCH FINES FEED IS IN THE BACKGROUND AND 18 INCH BELT CONVEYOR DISCHARGE IS SLIGHTLY RIGHT OF CENTER. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Measurement of tectonic surface uplift rate in a young collisional mountain belt

USGS Publications Warehouse

Abbott, L.D.; Silver, E.A.; Anderson, R. Scott; Smith, R.; Ingle, J.C.; Kling, S.A.; Haig, D.; Small, E.; Galewsky, J.; Sliter, W.

1997-01-01

Measurement of the rate of tectonically driven surface uplift is crucial to a complete understanding of mountain building dynamics. The lack of a suitable rock record typically prevents determination of this quantity, but the unusual geology of Papua New Guinea's Finisterre mountains makes measurement of this rate possible. The tectonic surface uplift rate at the Finisterre range is 0.8-2.1 mm yr-1, approximately that expected to arise from crustal thickening.

The role of Mesozoic sedimentary basin tapers on the formation of Cenozoic crustal shortening structures and foredeep in the western Sichuan Basin, China

NASA Astrophysics Data System (ADS)

Wang, M.

2017-12-01

The foreland basin records important clues of tectonic and sedimentary process of mountain-building, thus to explore its dynamic mechanism on the formation is an important issue of the mountain-basin interaction. The Longmen Shan fold-and-thrust belt and its adjacent Sichuan basin located in the eastern margin of Tibetan Plateau, are one of the most-concerned regions of studying modern mountain-building and seismic process, and are also a natural laboratory of studying the dynamics of the formation and development of foreland basin. However, it still need further explore on the mechanics of the development of the Cenozoic foreland basin and thrust-belts in the western Sichuan Basin. The Longmen Shan thrust belt has experienced multi-stages of tectonics evolution, foreland basin formation and topography growth since Late Triassic, and whether the early formed basin architecture and large Mesozoic sedimentary basin taper can influence the formation and development of the Cenozoic foreland basin and thrust belts? To solve these issues, this project aim to focus on the Cenozoic foreland basin and internal crustal shortening structures in the western Sichuan basin, on the basis of growth critical wedge taper theory. We will reconstruct the shape of multi-phases of sedimentary basin tapers, the temporal-spatial distribution of crustal shortening and thrusting sequences, and analyze the control mechanism of Mesozoic sedimentary basin taper on the formation of Cenozoic foreland basins, and final explore the interaction between the tectonics geomorphology, stress field and dynamic propagation of foreland basin.

Tectonics vs. Climate efficiency in triggering detrital input in sedimentary basins: the Po Plain-Venetian-Adriatic Foreland Basin (Northern Italy)

NASA Astrophysics Data System (ADS)

Amadori, Chiara; Di Giulio, Andrea; Toscani, Giovanni; Lombardi, Stefano; Milanesi, Riccardo; Panara, Yuri; Fantoni, Roberto

2017-04-01

The relative efficiency of tectonics respect to climate in triggering erosion of mountain belts is a classical but still open debate in geosciences. The fact that data both from tectonically active and inactive mountain regions in different latitudes, record a worldwide increase of sediment input to sedimentary basins during the last million years concomitantly with the cooling of global climate and its evolution toward the modern high amplitude oscillating conditions pushed some authors to conclude that Pliocene-Pleistocene climate has been more efficient than tectonics in triggering mountain erosion. Po Plain-Venetian-Adriatic Foreland System, made by the relatively independent Po Plain-Northern Adriatic Basin and Venetian-Friulian Basin, provides an ideal case of study to test this hypothesis and possibly quantify the difference between the efficiency of the two. In fact it is a relatively closed basin (i.e. without significant sediment escape) with a fairly continuous sedimentation (i.e. with a quite continuous sedimentary record) completely surrounded by collisional belts (Alps, Northern Apennines and Dinarides) that experienced only very weak tectonic activity since Calabrian time, i.e. when climate cooling and cyclicity increased the most. We present a quantitative reconstruction of the sediment flow delivered from the surrounding mountain belts to the different part of the basin during Pliocene-Pleistocene time. This flow was obtained through the 3D reconstruction of the Venetian-Friulian and Po Plain Northern Adriatic Basins architecture, performed by means of the seismic-based interpretation and time-to-depth conversion of six chronologically constrained surfaces (seismic and well log data from courtesy of ENI); moreover, a 3D decompaction of the sediment volume bounded by each couple of surfaces has been included in the workflow, in order to avoid compaction-related bias. The obtained results show in both Basins a rapid four-folds increase of the sediment input occurred since mid-Pleistocene time respect to Pliocene-Gelasian times. Even if the absolute amount of sediment arriving in the two basins is quite different, reflecting the different extension of their source regions, this increase occurred concomitantly with both the strong decrease of tectonic activity in the surrounding belts and the onset of major glaciations in the Alpine range. Therefore we argue that a cool, highly oscillating climate, causing glacial-interglacial cycles is approximately 4 times more efficient than tectonics in promoting the erosion of mountain belts and the related detrital input in the surrounding sedimentary basins.

Earth observation

NASA Image and Video Library

2014-08-31

ISS040-E-113700 (31 Aug. 2014) --- This panorama view, photographed by an Expedition 40 crew member on the International Space Station, shows tan-colored dust of a major dust storm obscuring the Persian Gulf and the its northern shoreline. Strong north winds often blow in summer, churning up dust from the entire length of the desert surfaces of the Tigris and Euphrates valleys (top left). Dust partly obscures the hundreds of kilometers of Iraq’s light-green agricultural lands along these rivers (left). A line of thunderstorms is being set off by the Zagros Mountains of Iran (right), with the setting sun casting long shadows from the thunderheads. Space station crews see sixteen sunrises and sunsets every day from low Earth orbit. Here the crew captured dusk in a darkening Iranian landscape (right).

Preliminary Geologic Map of the White Sulphur Springs 30' x 60' Quadrangle, Montana

USGS Publications Warehouse

Reynolds, Mitchell W.; Brandt, Theodore R.

2006-01-01

The geologic map of the White Sulphur Springs quadrangle, scale 1:100,000, was made as part of the Montana Investigations Project to provide new information on the stratigraphy, structure, and geologic history of the geologically complex area in west-central Montana. The quadrangle encompasses about 4,235 km2 (1,635 mi2), across part of the Smith River basin, the west end of the Little Belt Mountains, the Castle Mountains, and the upper parts of the basins of the North Forks of the Smith and Musselshell Rivers and the Judith River. Geologically the quadrangle extends across the eastern part of the Helena structural salient in the Rocky Mountain thrust belt, a segment of the Lewis and Clark tectonic zone, west end of the ancestral central Montana uplift, and the southwest edge of the Judith basin. Rocks and sediments in the White Sulphur Springs quadrangle are assigned to 88 map units on the basis of rock or sediment type and age. The oldest rock exposed is Neoarchean diorite that is infolded with Paleoproterozoic metamorphic rocks including gneiss, diorite, granite, amphibolite, schist, and mixed metamorphic rock types. A thick succession of the Mesoproterozoic Belt Supergroup unconformably overlies the metamorphic rocks and, in turn, is overlain unconformably by Phanerozoic sedimentary and volcanic rocks. Across most of the quadrangle, the pre-Tertiary stratigraphic succession is intruded by Eocene dikes, sills, and plutons. The central part of the Little Belt Mountains is generally underlain by laccoliths and sheet-like bodies of quartz monzonite or dacite. Oligocene andesitic basalt flows in the western and southern part of the quadrangle document both the configuration of the late Eocene erosional surfaces and the extent of extensional faulting younger than early Oligocene in the area. Pliocene, Miocene, and Oligocene strata, mapped as 11 units, consist generally of interbedded sand, gravel, and tuffaceous sedimentary rock. Quaternary and Quaternary-Tertiary sediments rest across the older Cenozoic deposits and across all older rocks. The Quaternary and Quaternary-Tertiary deposits generally are gravels that mantle broad erosional surfaces on the flanks of the mountains, gravels in stream channels, and colluvium and landslide deposits on hill sides. Glacial deposits, representing at least two stages of glaciation, are present in the northern part of the Little Belt Mountains. The geologic structure of much of the northwest part of the quadrangle is a broad uplift, in the core of which the Paleoproterozoic and Neoarchean metamorphic rocks are exposed. Down plunge to the east, the succession of Phanerozoic sedimentary rocks define an east-trending arch, cored locally by Mesoproterozoic strata of the Belt Supergroup. The north flank of the arch dips steeply north as a monocline. Stratigraphic relations among Mississippian, Pennsylvanian, and Jurassic strata document the recurrent uplift and erosion on that north flank. The broader arch of the Little Belt Mountains reflects the west plunge of the ancestral Central Montana uplift. The eastern extension of the Lewis and Clark tectonic zone is exposed in the southern half of the quadrangle where the Volcano Valley fault zone curves from west to southeast as a reverse fault along which the latest movement is up on the south side. The fault zone ends in an anticline in the south-central margin of the quadrangle. Stratigraphic overlap of Phanerozoic strata over the truncated edges of Mesoproterozoic units documents that the area of the eastern terminus of the fault zone was tectonically recurrently active. Northeast trending strike-slip faults displace Mesoproterozoic rocks in the northwest and south-central parts of the quadrangle. Several of those faults are overlain unconformably by the Middle Cambrian Flathead Sandstone. Other north-east and west-trending faults across the central part of the quadrangle are intruded by middle Eocene plutons. You

Early to Middle Jurassic tectonic evolution of the Bogda Mountains, Northwest China: Evidence from sedimentology and detrital zircon geochronology

NASA Astrophysics Data System (ADS)

Ji, Hongjie; Tao, Huifei; Wang, Qi; Qiu, Zhen; Ma, Dongxu; Qiu, Junli; Liao, Peng

2018-03-01

The Bogda Mountains, as an important intracontinental orogenic belt, are situated in the southern part of the Central Asian Orogenic Belt (CAOB), and are a key area for understanding the Mesozoic evolution of the CAOB. However, the tectonic evolution of the Bogda Mountains remains controversial during the Mesozoic Era, especially the Early to Middle Jurassic Periods. The successive Lower to Middle Jurassic strata are well preserved and exposed along the northern flank of the Western Bogda Mountains and record the uplift processes of the Bogda Mountains. In this study, we analysed sedimentary facies combined with detrital zircon U-Pb geochronology at five sections of Lower to Middle Jurassic strata to detect the tectonic evolution and changes of provenance in the Bogda area. During Early to Middle Jurassic times, the fluvial, deltaic and lacustrine environments dominated in the western section of the Bogda area. The existence of Early Triassic peak age indicates that the Bogda Mountains did not experience uplift during the period of early Badaowan Formation deposition. The Early Triassic to Late Permian granitoid plutons and Carboniferous volcanic rocks from the Barkol and Santanghu areas were the main provenances. The significant change in the U-Pb age spectrum implies that the Eastern Bogda Mountains initiated uplift in the period of late Badaowan Formation deposition, and the Eastern Junggar Basin and the Turpan-Hami Basin were partially partitioned. The Eastern Bogda Mountains gradually became the major provenance. From the period of early Sangonghe to early Toutunhe Formations deposition, the provenance of the sediments and basin-range frame were similar to that of late Badaowan. However, the Eastern Bogda Mountains suffered intermittent uplift three times, and successive denudation. The uplifts respectively happened in early Sangonghe, late Sangonghe to early Xishanyao, and late Xishanyao to early Toutunhe. During the deposition stage of Toutunhe Formation, a relatively strong tectonic reactivation took place along the Late Palaeozoic Bogda rift belt accompanied by relatively large-scale magmatism. The distinct basement structure between the eastern and western Bogda rift could be the structure basis of difference uplift in the Bogda area during the Mesozoic Era. The Early to Middle Jurassic episodic uplift of Eastern Bogda Mountains perhaps was related to the post-collisional convergence of the Qiangtang Block from late Badaowan to early Sangonghe, the closure of the western Mongol-Okhotsk Ocean at the Early-Middle Jurassic boundary and the tectonic accretion at the south Asian margin of Pamir Block during late Middle Jurassic times.

The morphology of the ridge belts on Venus

NASA Astrophysics Data System (ADS)

Kriuchkov, V. P.

1990-06-01

The length and spacing of linear features were measured for ridge and groove belts, for the outer mountain zones of the Lakshmi planum, and for the outer ridge zones of coronal structures. The distributions of these parameters show small but significant differences in most of the cases. The ridges are assumed to result from deformations. Deformed-layer thickness were estimated for various types of linear subdivisions.

Preliminary bedrock geologic map of part of the northern disturbed belt, Lewis and Clark, Teton, Pondera, Glacier, Flathead, and Powell Counties, Montana

USGS Publications Warehouse

Mudge, Melville R.; Earhart, Robert L.; Rice, Dudley D.; Heisey, E.L.

1977-01-01

The geologic map covers the Sawtooth and Lewis and Clark Ranges and part of the Flathead Range. It includes most of the disturbed belt in northwestern Moutana except the area east of the northern Rocky Mountains and the norhtern and southern parts of the belt. Most data are from an unpublished map of the Bob Marshall Wilderness and of the many proposed additions to the Wilderness. Strike and dip symbols are omitted from the map, and all contacts are shown in solid lines, alhough locally they are inferred beneath a Quaternary cover. Future studies will complete mapping of the northern disturbed belt in Montana.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, G.

About 40 miles outside of Price, UT, is Natomas Trail Mountain Coal Co. Owned and operated by Natomas Coal, Englewood, CO, Trail Mountain Coal is a two section mine using continuous miners, shuttle cars and belt haulage. Seam height averages about seven feet. Until about a year and a half ago, Trail Mountain Coal Co. was not much different from most mines. With about 120 employees, they were faced with the same problems seen throughout the industry such as high absenteeism, inexperience, poor communication and cooperation, and a host of other problems.

Aeromagnetic map and interpretation of geophysical data from the Condrey Mountain Roadless Area, Siskiyou County, California

USGS Publications Warehouse

Jachens, R.C.; Elder, W.P.

1983-01-01

The western Paleozoic and Triassic belt that nearly surrounds the Condrey Mountain Schist is a melange of sedimentary, volcanic, and ultramafic rocks metamorphosed to amphibolite facies (Coleman and others, 1983). Only two samples of the metamorphic melange were collected near the Condrcy Mountain Road less Area, but extensive sampling of this unit southwest of the roadless area yielded an average sample density of 2.86±0.15 g/cm3 (112 samples) (Jachens and others, 1983).

Thermobarometric constraints on mid-Cretaceous to late Cretaceous metamorphic events in the western metamorphic belt of the Coast Mountains complex near Petersburg, southeastern Alaska

USGS Publications Warehouse

Himmelberg, Glen R.; Brew, David A.

2005-01-01

The western metamorphic belt is part of the Coast Mountains Complex of southeastern Alaska and western Canada. This complex formed as a result of mid-Cretaceous through middle Eocene crustal shortening between the previously amalgamated Wrangellia and Alexander terranes (Insular superterrane) and previously accreted terranes of the North American continental margin (Intermontane superterrane). The western metamorphic belt, which ranges from a few kilometers to several tens of kilometers in width, records a complex sequence of contact-metamorphic and regional metamorphic events, the most significant of which are designated M1R, M2C-R, and M3R. The M1R regional metamorphic event ranged in grade from subgreenschist to greenschist facies and was overprinted by the M2C-R and M3R metamorphic events. The M2C-R metamorphic event is recorded in discrete contact-metamorphic aureoles and regional metamorphic-mineral assemblages related to tonalite-granodiorite plutons of the Admiralty-Revillagigedo plutonic belt. The M3R metamorphic belt, which is adjacent to the M2C-R belt, is characterized by regional Barrovian isograds of garnet, staurolite, kyanite, and sillimanite. Using the THERMOCALC program, pressure-temperature (P-T) conditions for the M2C-R metamorphic event are estimated to be in the ranges 5.3-7.5 kbars and 525-640 deg.C and for the M3R metamorphic event in the ranges 9.4-12.6 kbars and 730-895 deg.C. The M2C-R metamorphic event occurred at approximately 90 Ma, but the timing of the M3R metamorphic event is poorly documented and uncertain. On the basis of an 40Ar/39Ar age on actinolitic amphibole and a Sm-Nd age on garnet core, the timing of metamorphism might be constrained between 90+/-1 and 80+/-9 Ma, although the Sm-Nd age of 80+/-9 m.y. possibly reflects postpeak growth. Thermobarometric data suggest that the two events occurred at different crustal levels and followed different P-T paths. No evidence exists that M2C-R metamorphic-mineral assemblages were overprinted by the M3R metamorphic event, as proposed by some workers. Juxtaposition of the two belts of rocks probably occurred along the Coast shear zone during uplift and exhumation of the Coast Mountains.

The cretaceous source rocks in the Zagros Foothills of Iran: An example of a large size intracratonic basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bordenave, M.L.; Huc, A.Y.

1993-02-01

The Zagros orogenic belt of Iran is one of the world most prolific petroleum producing area. However, most of the oil production is originated from a relatively small area, the 60,000 km[sup 2] wide Dezful Embayment which contains approximately 12% of the proven oil global reserves. The distribution of the oil and gas fields results from the area extent of six identified source rock layers, their thermal history and reservoir, cap rock and trap availability. In this paper, the emphasis is three of the layers of Cretaceous sources rocks. The Garau facies was deposited during the Neocomian to Albian intervalmore » over Lurestan, Northeast Khuzestan and extends over the extreme northeast part of Fars, the Kazhdumi source rock which deposited over the Dezful Embayment, and eventually the Senonian Gurpi Formation which has marginal source rock characteristics in limited areas of Khuzestan and Northern Fars. The deposition environment of these source rock layers corresponds to semipermanent depressions, included in an overall shallow water intracratonic basin communicating with the South Tethys Ocean. These depressions became anoxic when climatic oceanographical and geological conditions were adequate, i.e., humid climate, high stand water, influxes of fine grained clastics and the existence of sills separating the depression from the open sea. Distribution maps of these source rock layers resulting from extensive field work and well control are also given. The maturation history of source rocks is reconstructed from a set of isopachs. It was found that the main contributor to the oil reserves is the Kazhdumi source rock which is associated with excellent calcareous reservoirs.« less

Stress state and movement potential of the Kar-e-Bas fault zone, Fars, Iran

NASA Astrophysics Data System (ADS)

Sarkarinejad, Khalil; Zafarmand, Bahareh

2017-08-01

The Kar-e-Bas or Mengharak basement-inverted fault is comprised of six segments in the Zagros foreland folded belt of Iran. In the Fars region, this fault zone associated with the Kazerun, Sabz-Pushan and Sarvestan faults serves as a lateral transfer zone that accommodates the change in shortening direction from the western central to the eastern Zagros. This study evaluates the recent tectonic stress regime of the Kar-e-Bas fault zone based on inversion of earthquake focal mechanism data, and quantifies the fault movement potential of this zone based on the relationship between fault geometric characteristics and recent tectonic stress regimes. The trend and plunge of σ 1 and σ 3 are S25°W/04°-N31°E/05° and S65°E/04°-N60°W/10°, respectively, with a stress ratio of Φ = 0.83. These results are consistent with the collision direction of the Afro-Arabian continent and the Iranian microcontinent. The near horizontal plunge of maximum and minimum principle stresses and the value of stress ratio Φ indicate that the state of stress is nearly strike-slip dominated with little relative difference between the value of two principal stresses, σ 1 and σ 2. The obliquity of the maximum compressional stress into the fault trend reveals a typical stress partitioning of thrust and strike-slip motion in the Kar-e-Bas fault zone. Analysis of the movement potential of this fault zone shows that its northern segment has a higher potential of fault activity (0.99). The negligible difference between the fault-plane dips of the segments indicates that their strike is a controlling factor in the changes in movement potential.

Changes in the high-mountain vegetation of the Central Iberian Peninsula as a probable sign of global warming.

PubMed

Sanz-Elorza, Mario; Dana, Elías D; González, Alberto; Sobrino, Eduardo

2003-08-01

Aerial images of the high summits of the Spanish Central Range reveal significant changes in vegetation over the period 1957 to 1991. These changes include the replacement of high-mountain grassland communities dominated by Festuca aragonensis, typical of the Cryoro-Mediterranean belt, by shrub patches of Juniperus communis ssp. alpina and Cytisus oromediterraneus from lower altitudes (Oro-Mediterranean belt). Climatic data indicate a shift towards warmer conditions in this mountainous region since the 1940s, with the shift being particularly marked from 1960. Changes include significantly higher minimum and maximum temperatures, fewer days with snow cover and a redistribution of monthly rainfall. Total yearly precipitation showed no significant variation. There were no marked changes in land use during the time frame considered, although there were minor changes in grazing species in the 19th century. It is hypothesized that the advance of woody species into higher altitudes is probably related to climate change, which could have acted in conjunction with discrete variations in landscape management. The pronounced changes observed in the plant communities of the area reflect the susceptibility of high-mountain Mediterranean species to environmental change.

Stratigraphy and structure of the Sevier thrust belt and proximal foreland-basin system in central Utah: A transect from the Sevier Desert to the Wasatch Plateau

USGS Publications Warehouse

Lawton, T.F.; Sprinkel, D.A.; Decelles, P.G.; Mitra, G.; Sussman, A.J.; Weiss, M.P.

1997-01-01

The Sevier orogenic belt in central Utah comprises four north-northwest trending thrust plates and two structural culminations that record crustal shortening and uplift in late Mesozoic and early Tertiary time. Synorogenic clastic rocks, mostly conglomerate and sandstone, exposed within the thrust belt were deposited in wedge-top and foredeep depozones within the proximal part of the foreland-basin system. The geologic relations preserved between thrust structures and synorogenic deposits demonstrate a foreland-breaking sequence of thrust deformation that was modified by minor out-of-sequence thrust displacement. Structural culminations in the interior part of the thrust belt deformed and uplifted some of the thrust sheets following their emplacement. Strata in the foreland basin indicate that the thrust sheets of central Utah were emplaced between latest Jurassic and Eocene time. The oldest strata of the foredeep depozone (Cedar Mountain Formation) are Neocomian and were derived from the hanging wall of the Canyon Range thrust. The foredeep depozone subsided most rapidly during Albian through Santonian or early Campanian time and accumulated about 2.5 km of conglomeratic strata (Indianola Group). The overlying North Horn Formation accumulated in a wedge-top basin from the Campanian to the Eocene and records propagation of the Gunnison thrust beneath the former foredeep. The Canyon Range Conglomerate of the Canyon Mountains, equivalent to the Indianola Group and the North Horn Formation, was deposited exclusively in a wedge-top setting on the Canyon Range and Pavant thrust sheets. This field trip, a three day, west-to-east traverse of the Sevier orogenic belt in central Utah, visits localities where timing of thrust structures is demonstrated by geometry of cross-cutting relations, growth strata associated with faults and folds, or deformation of foredeep deposits. Stops in the Canyon Mountains emphasize geometry of late structural culminations and relationships of the Canyon Range thrust to growth strata deposited in the wedge-top depozone. Stops in the San Pitch Mountains illustrate deposits of the foredeep depozone and younger, superjacent wedge-top depozone. Stops in the Sanpete Valley and western part of the Wasatch Plateau examine the evolution of the foreland-basin system from foredeep to wedge-top during growth of a triangle zone near the front of the Gunnison thrust.

The Middle Jurassic basinal deposits of the Surmeh Formation in the Central Zagros Mountains, southwest Iran: Facies, sequence stratigraphy, and controls

USGS Publications Warehouse

Lasemi, Y.; Jalilian, A.H.

2010-01-01

The lower part of the Lower to Upper Jurassic Surmeh Formation consists of a succession of shallow marine carbonates (Toarcian-Aalenian) overlain by a deep marine basinal succession (Aalenian-Bajocian) that grades upward to Middle to Upper Jurassic platform carbonates. The termination of shallow marine carbonate deposition of the lower part of the Surmeh Formation and the establishment of deep marine sedimentation indicate a change in the style of sedimentation in the Neotethys passive margin of southwest Iran during the Middle Jurassic. To evaluate the reasons for this change and to assess the basin configuration during the Middle Jurassic, this study focuses on facies analysis and sequence stratigraphy of the basinal deposits (pelagic and calciturbidite facies) of the Surmeh Formation, referred here as 'lower shaley unit' in the Central Zagros region. The upper Aalenian-Bajocian 'lower shaley unit' overlies, with an abrupt contact, the Toarcian-lower Aalenian platform carbonates. It consists of pelagic (calcareous shale and limestone) and calciturbidite facies grading to upper Bajocian-Bathonian platform carbonates. Calciturbidite deposits in the 'lower shaley unit' consist of various graded grainstone to lime mudstone facies containing mixed deep marine fauna and platform-derived material. These facies include quartz-bearing lithoclast/intraclast grainstone to lime mudstone, bioclast/ooid/peloid intraclast grainstone, ooid grainstone to packstone, and lime wackestone to mudstone. The calciturbidite layers are erosive-based and commonly exhibit graded bedding, incomplete Bouma turbidite sequence, flute casts, and load casts. They consist chiefly of platform-derived materials including ooids, intraclasts/lithoclasts, peloids, echinoderms, brachiopods, bivalves, and open-ocean biota, such as planktonic bivalves, crinoids, coccoliths, foraminifers, and sponge spicules. The 'lower shaley unit' constitutes the late transgressive and the main part of the highstand systems tract of a depositional sequence and grades upward to platform margin and platform interior facies as a result of late highstand basinward progradation. The sedimentary record of the 'lower shaley unit' in the Central Zagros region reveals the existence of a northwest-southeast trending platform margin during the Middle Jurassic that faced a deep basin, the 'Pars intrashelf basin' in the northeast. The thinning of calciturbidite layers towards the northeast and the widespread Middle Jurassic platform carbonates in the southern Persian Gulf states and in the Persian Gulf area support the existence of a southwest platform margin and platform interior source area. The platform margin was formed as a result of tectonic activity along the preexisting Mountain Front fault associated with Cimmerian continental rifting in northeast Gondwana. Flooding of the southwest platform margin during early to middle Bajocian resulted in the reestablishment of the carbonate sediment factory and overproduction of shallow marine carbonates associated with sea-level highstand, which led to vertical and lateral expansion of the platform and gradual infilling of the Pars intrashelf basin by late Bajocian time. ?? 2010 Springer-Verlag.

Mediterranean summer climate and the importance of Middle-East Topography

NASA Astrophysics Data System (ADS)

Simpson, Isla; Seager, Richard; Shaw, Tiffany; Ting, Mingfang

2015-04-01

In summer, the atmospheric circulation over the Mediterranean is characterized by localized intense subsidence and low level northerlies over the central- to eastern portion of the basin. Here, simulations with the Community Atmosphere Model, version 5 are used to investigate the influence of the elevated terrain of North Africa and the Middle East on this summertime circulation. This builds on previous work that recognized a role for North African topography in localizing the Mediterranean subsidence. By flattening the two regions of elevated terrain in the model it is demonstrated that, while they both conspire to produce about 30% of the summertime subsidence, contrary to previous work, the mountains of the Middle-East dominate in this topographic contribution by far. This topography, consisting primarily of the Zagros Mountain range, alters the circulation throughout the depth of the troposphere over the Mediterranean, and further East. The model results suggest that about 20% of the Mediterranean summertime moisture deficit can be attributed to this mountain induced circulation. This topography, therefore, plays an important role in the climate of the Mediterranean and the large scale circulation over the rest of Eurasia during the summer. Further stationary wave modelling reveals that the mountain influence is produced via mechanical forcing of the flow. The greatest influence of the topography occurs when the low level incident flow is easterly, as happens during the summer, primarily due to the presence of condensational heating over Asia. During other seasons, when the low level incident flow is westerly, the influence of Middle-East topography on the Mediterranean is negligible.

A synthesis of mineralization styles and geodynamic settings of the Paleozoic and Mesozoic metallic ore deposits in the Altay Mountains, NW China

NASA Astrophysics Data System (ADS)

Yang, Fuquan; Geng, Xinxia; Wang, Rui; Zhang, Zhixin; Guo, Xuji

2018-06-01

The Altay Mountains within the Xinjiang region of northwestern China hosts major metallic ore deposits. Here we review the geological characteristics, metallogenic features and tectonic settings of these deposits. The metallic ore deposits in the Altay Mountains occur mainly within four regions: North Altay, Central Altay, South Altay and Erqis. We recognize seven types of metallic ore deposits in the Altay Mountains: VMS, submarine volcanogenic iron, magmatic, skarn, pegmatite, hydrothermal vein (Cu-Zn, Fe) and orogenic gold. Among these types, the VMS, pegmatite, orogenic gold and skarn deposits are the most common. Most of the rare metal pegmatite deposits are distributed in Central Altay, with only a few in South Altay. The VMS, submarine volcanogenic type iron and skarn-type deposits are distributed in South Altay, whereas the orogenic-type gold deposits are distributed in the Erqis Fault belt. The hydrothermal vein-type deposits occur in the Erqis Fault belt and Chonghu'er Basin in South Altay. Magmatic-type deposits are mostly in the Erqis Fault belt and Central Altay. Based on isotopic age data, the VMS, submarine volcanogenic-type Fe and skarn-type Cu, Pb, Zn, Fe mineralization occurred during Early-Middle Devonian (∼410-377 Ma), orogenic-type Au, magmatic-type Cu-Ni, and a small number of skarn-type Fe, hydrothermal vein-type Cu-Zn, pegmatite-type rare-metal deposits in Early-Middle Permian (293-261 Ma), pegmatite-type rare-metal deposits, few skarn-type Fe deposit in Early-Middle Triassic (248-232 Ma), and dominantly represented by pegmatite-type rare-metal deposits in Late Triassic-Early Jurassic (223-180 Ma). The metallic ore deposits in the Altay Mountains formed in various tectonic settings, such as the Early-Middle Devonian continental arc and oceanic island arc, Early-Middle Permian post-collisional extensional setting, and Triassic-Early Jurassic intracontinental setting.

Evidence of a low-latitude glacial buzzsaw: Progressive hypsometry reveals height-limiting glacial erosion in tropical mountain belts

NASA Astrophysics Data System (ADS)

Cunningham, M.; Stark, C. P.; Kaplan, M. R.; Schaefer, J. M.; Winckler, G.

2017-12-01

It has been widely demonstrated that glacial erosion limits the height of mid-latitude mountain ranges—a phenomenon commonly referred to as the "glacial buzzsaw." The strength of the buzzsaw is thought to diminish, or die out completely, at lower latitudes, where glacial landscapes occupy only a small part of mountain belts affected by Pleistocene glaciation. Here we argue that glacial erosion has actually truncated the rise of many tropical orogens. To elicit signs of height-limiting glacial erosion in the tropics, we employ a new take on an old tool: we identify transient geomorphic features by tracking the evolution of (sub)catchment hypsometry with increasing elevation above base level, a method we term "progressive hypsometry." In several tropical mountain belts, including the Central Range of Taiwan, the Talamanca of Costa Rica, the Finisterres of Papua New Guinea, and the Rwenzoris of East Africa, progressive hypsometry reveals transient landscapes perched at various elevations, but the highest of these transient features are consistently glacial landscapes near the lower limit of late-Pleistocene glacial equilibrium line altitude (ELA) fluctuation. We attribute this pattern to an efficient glacial buzzsaw. In many cases, these glacial landscapes are undergoing contemporary destruction by headward propagating, fluvially-driven escarpments. We deduce that a duel between glacial buzzcutting and fluvially-driven scarp propagation has been ongoing throughout the Pleistocene in these places, and that the preservation potential of tropical glacial landscapes is low. To this end, we have identified possible remnants of glacial landscapes in the final stages of scarp consumption, and use 3He surface exposure age dating of boulders and bedrock surfaces in two of these landscapes to constrain major geomorphic activity to before the onset of the Last Glacial Maximum. Our work points to a profound climatic influence on the evolution of these warm, tectonically active, tropical mountain ranges and identifies glaciation as a trigger of autogenic behavior in flanking fluvial landscapes.

A bioclimatic characterization of high elevation habitats in the Alborz mountains of Iran.

PubMed

Noroozi, Jalil; Körner, Christian

2018-01-01

The Alborz mountains in N-Iran at 36° N rise from the Caspian Sea to 5671 m a.s.l., with warm-temperate, winter-deciduous forests in the lower montane belt in northern slopes, and vast treeless terrain at higher elevation. A lack of rainfall (ca. 550 mm at high elevations) cannot explain the absence of trees. Hence, it is an open question, which parts of these mountains belong to the alpine belt. Here we use bioclimatic data to estimate the position of the potential climatic treeline, and thus, define bioclimatologically, what is alpine and what is not. We employed the same miniature data loggers and protocol that had been applied in a Europe-wide assessment of alpine climates and a global survey of treeline temperatures. The data suggest a potential treeline position at ca. 3300 m a.s.l., that is ca. 900 m above the upper edge of the current oak forest, or 450 m above its highest outposts. The alpine terrain above the climatic treeline position shows a temperature regime comparable to sites in the European Alps. At the upper limit of angiosperm life, at 4850 m a.s.l., the growing season lasted 63 days with a seasonal mean root zone temperature of 4.5 °C. We conclude that (1) the absence of trees below 2850 m a.s.l. is clearly due to millennia of land use. The absence of trees between 2850 and 3300 m a.s.l. is either due to the absence of suitable tree taxa, or the only potential regional taxon for those elevations, Juniperus excelsa , had been eradicated by land use as well. (2) These continental mountains provide thermal life conditions in the alpine belt similar to other temperate mountains. (3) Topography and snow melt regimes play a significant role for the structure of the alpine vegetation mosaics.

Flat-topped mountain ranges: Their global distribution and value for understanding the evolution of mountain topography

NASA Astrophysics Data System (ADS)

Calvet, Marc; Gunnell, Yanni; Farines, Bernard

2015-07-01

Extensive tracts of low-gradient topography in steep mountain ranges, either forming rangetop plateaus or terraced pediments on range flanks, are widely distributed in mountain belts around the world. Before the advent of plate tectonics, such populations of planar landforms were interpreted as vestiges of a post-orogenic raised peneplain, i.e., a low-gradient land surface resulting from the decay, during long intervals of base-level stability, of a previous mountain range that was subsequently raised once again to great elevations-thus forming a new mountain range. This two-stage model has been challenged by theories that advocate continuity in tectonic processes and more gradual changes in base level, and thus expect a more immediate and proportionate response of geomorphic systems. Here we present a global survey of erosion surfaces in mountain ranges and put existing theories and empirical evidence into a broad perspective calling for further research into the rates and regimes of long-term mountain evolution. The resulting library of case studies provides opportunities for comparative analysis and helps to classify the landform mosaics that are likely to arise from the interplay between (i) crustal regimes, which at convergent plate margins need be neither uniform nor steady at all times; (ii) radiation-driven and gravity-driven geomorphic regimes, which are mainly determined by crustal boundary conditions and climate; and (iii) paleogeography, through which clues about base-level changes can be obtained. We examine intracratonic and plate-margin settings, with examples from thin-skinned fold belts, thick-skinned fold belts, island-arc and other subduction-related settings, and bivergent collisional orogens. Results reveal that the existence of erosion surfaces is not a simple function of geodynamic setting. Although some erosion surfaces are pre-orogenic, evidence about their predominantly post-orogenic age is supported by apatite fission-track and helium rock-cooling signatures, stratigraphic age-bracketing, stream channel gradient patterns, and other direct or indirect dating criteria. It follows that many portions of mountain belts undergo unsteady, nonuniform post-orogenic landscape evolution trajectories, with intermittent opportunities for relief reduction. The resulting erosion surfaces remain preserved as signatures of transient landscape evolution regimes. We find that (i) occurrences of planar topography form populations of discrete, insular landscape units, only some of which could be interpreted as fragments of a fluvially dissected, and/or tectonically fragmented, regional peneplain. (ii) The post-orogenic time required for achieving advanced stages of relief reduction is variable, ranging from 3 to 70 Ma. (iii) Partly depending on whether the adjacent sedimentary basins were over- or underfilled, some erosion surfaces may have been controlled by raised base levels and may thus have formed at high elevations; however, in many cases they were disconnected from marine base levels by rapid surface uplift, thus acquiring their elevated positions in recent time. In some cases, subcrustal processes such as asthenospheric anomalies, and/or lithospheric slab tear or breakoff, explain extremely rapid, regional post-orogenic uplift. (iv) Overall, the conditions for achieving surface preservation in steep and tectonically active terrain are predictable but also quite varied and contingent on context.

Tectonics of the central Andes

NASA Technical Reports Server (NTRS)

Bloom, Arthur L.; Isacks, Bryan L.; Fielding, Eric J.; Fox, Andrew N.; Gubbels, Timothy L.

1989-01-01

Acquisition of nearly complete coverage of Thematic Mapper data for the central Andes between about 15 to 34 degrees S has stimulated a comprehensive and unprecedented study of the interaction of tectonics and climate in a young and actively developing major continental mountain belt. The current state of the synoptic mapping of key physiographic, tectonic, and climatic indicators of the dynamics of the mountain/climate system are briefly reviewed.

Enhanced oxidative weathering in glaciated mountain catchments: A stabilising feedback on atmospheric carbon dioxide?

NASA Astrophysics Data System (ADS)

Horan, K.; Hilton, R. G.; Burton, K. W.; Selby, D. S.; Ottley, C. J.

2015-12-01

Mountain belts act as sources of carbon dioxide (CO2) to the atmosphere if physical erosion and exhumation expose rock-derived organic carbon ('petrogenic' organic carbon, OCpetro) to chemical weathering. Estimates suggest 15x1021g of carbon is stored in rocks globally as OCpetro, ~25,000 times the amount of carbon in the pre-industrial atmosphere. Alongside volcanic and metamorphic degassing, OCpetro weathering is thought to be the main source of CO2 to the atmosphere over geological timescales. Erosion in mountain river catchments has been shown to enhance oxidative weathering and CO2 release. However, we still lack studies which quantify this process. In addition, it is not clear how glaciation may impact OCpetro oxidation. In analogy with silicate weathering, large amounts of fine sediment in glacial catchments may enhance oxidative weathering. Here we quantify oxidative weathering in nine catchments draining OCpetro bearing rocks in the western Southern Alps, New Zealand. Using rhenium (Re) as a tracer of oxidative weathering, we develop techniques to precisely measure Re concentration at sub-ppt levels in river waters. Using [Re]water/[Re]rock as a weathering tracer, we estimate that the weathering efficiency in glacial catchments is >4 times that of non-glacial catchments. Combining this with the OCpetro content of rocks and dissolved Re flux, we estimate the CO2 release by OCpetro oxidation. The analysis suggests that non-glacial catchments in the western Southern Alps release similar amounts of CO2 as catchments in Taiwan where erosion rates are comparable. In this mountain belt, the CO2 release does not negate CO2 drawdown by silicate weathering and by riverine transfer of organic matter. Based on our results, we propose that mountain glaciation may greatly enhance OCpetro oxidation rates. Depending on the global fluxes involved, this provides a feedback to damp low atmospheric CO2 levels and global cooling. During glacial periods (low CO2, low global temperatures), increased CO2 emissions by OCpetro oxidation in mountain belts may act to counter global cooling.

Tracking the multi-stage exhumation history of the western Chinese Tianshan by Apatite Fission Track (AFT) dating - Implications for the preservation of epithermal deposits in ancient orogenic belt

NASA Astrophysics Data System (ADS)

Wang, Yannan; Cai, Keda

2017-04-01

The western Chinese Tianshan, located in the southern domain of the Central Asian Orogenic Belt (CAOB), was originally constructed by multiple accretion-collision processes in the Paleozoic, and was superimposed by complex intracontinental tectonic evolution in the Mesozoic-Cenozoic. Understanding the timing and mechanism of the latter geological processes is critical to unravel the preservation conditions of the epithermal deposits in the western Chinese Tianshan. This work presents new apatite fission track (AFT) data for three mountain ranges of the western Chinese Tianshan to track their exhumation history. Our AFT data gave a wide range of ages from 76.8 ± 5.5 Ma to 182.3 ± 9.9 Ma, and the mean confined fission track lengths are between 9.8 ± 0.5 μm and 12.3 ± 0.2 μm. The new data, in combination with the thermal history modeling，enable us to attribute the exhumation history to three primary stages, including Early Permian (300-280 Ma), Late Triassic-Early Cretaceous (230-130 Ma), and Late Oligocene-Early Miocene (30-20 Ma). The first stage may be caused by the terrane accretion-collision in the late Paleozoic. The second stage was likely related to the closure of the Mongol-Okhotsk Ocean during the Mesozoic. The last one is regarded as the result of the collision between the Indian Plate and the Eurasia Plate in the Cenozoic. The extraordinary exhumation processes of these three major mountain ranges might have been responsible for sediment supply to the corresponding intra-mountain basins in the western Chinese Tianshan, and the particularly mountain-basin coupling evolution is ascribed to an essential condition for the preservation of epithermal deposits in ancient orogenic belt.

Evidence for synchronous thin-skinned and basement deformation in the Cordilleran fold-thrust belt: the Tendoy Mountains, southwestern Montana

NASA Astrophysics Data System (ADS)

McDowell, Robin John

1997-01-01

The Tendoy Mountains contain the easternmost thin-skinned thrust sheets in the Cordilleran fold-thrust belt of southwestern Montana, and are in the zone of tectonic overlap between the Rocky Mountain foreland and the Cordilleran fold-thrust belt. The three frontal thrust sheets of the Tendoy Mountains are from north to south, the Armstead, McKenzie, and Tendoy sheets. Near the southeastern terminus of the Tendoy thrust sheet is a lateral ramp in which the Tendoy thrust climbs along strike from the Upper Mississippian Lombard Limestone to lower Cretaceous rocks. This ramp coincides with the southeastern side of the Paleozoic Snowcrest trough and projection of the range-flanking basement thrust of the Blacktail-Snowcrest uplift, suggesting either basement or stratigraphic control on location of the lateral ramp. Axes of major folds on the southern part of the Tendoy thrust sheet are parallel to the direction of thrust transport and to the trend of the Snowcrest Range. They are a result of: (1) Pre-thrust folding above basement faults; (2) Passive transportation of the folds from a down-plunge position; (3) Minor reactivation of basement faults; and (4) Emplacement of blind, sub-Tendoy, thin-skinned thrust faults. The Tendoy sheet also contains a major out-of-sequence thrust fault that formed in thick Upper Mississippian shales and created large, overturned, foreland-verging folds in Upper Mississippian to Triassic rocks. The out-of-sequence fault can be identified where stratigraphic section is omitted, and by a stratigraphic separation diagram that shows it cutting down section in the direction of transport. The prominent lateral ramp at the southern terminus of the Tendoy thrust sheet is a result of fault propagation through strata folded over the edge of the Blacktail-Snowcrest uplift.

K-Ar geochronology of the Survey Pass, Ambler River and Eastern Baird Mountains quadrangles, southwestern Brooks Range, Alaska

USGS Publications Warehouse

Turner, Donald L.; Forbes, R.B.; Mayfield, C.F.

1978-01-01

We report 76 previously unpublished K-Ar mineral ages from 47 metamorphic and igneous rocks in the southwestern Brooks Range. The pattern of radiometric ages is complex, reflecting the complex geologic history of this area. Local and regional radiometric evidence suggests that the southern Brooks Range schist belt has, at least in part, undergone a late Precambrian metamorphism and that the parent sedimentary and igneous rocks for the metamorphic rocks dated as late Precambrian are at least this old (Precambrian Z). This schist terrane experienced a major thermal event in mid-Cretaceous time, causing widespread resetting of nearly all K-Ar mica ages. A series of apparent ages intermediate between late Precambrian and mid-Cretaceous are interpreted as indicating varying amounts of partial argon loss from older rocks during the Cretaceous event. The schist belt is characterized by dominant metasediments and subordinate metabasites and metafelsites. Blueschists occur within the schist belt from the Chandalar quadrangle westward to the Baird Mountains quadrangle, but geologic evidence does not support the existence of a fossil subduction zone.

Structural history of Maxwell Montes, Venus: Implications for Venusian mountain belt formation

NASA Astrophysics Data System (ADS)

Keep, Myra; Hansen, Vicki L.

1994-12-01

Models for Venusian mountain belt formation are important for understanding planetary geodynamic mechanisms. A range of data sets at various scales must be considered in geodynamic modelling. Long wavelength data, such as gravity and geoid to topography ratios, need constraints from smaller-scale observations of the surface. Pre-Magellan images of the Venusian surface were not of high enough resolution to observe details of surface deformation. High-resolution Magellan images of Maxwell Montes and the other deformation belts allow us to determine the nature of surfce deformation. With these images we can begin to understand the constraints that surface deformation places on planetary dynamic models. Maxwell Montes and three other deformation belts (Akna, Freyja, and Danu montes) surround the highland plateau Lakshmi Planum in Venus, northern hemisphere. Maxwell, the highest of these belts, stands 11 km above mean planetary radius. We present a detailed structural and kinematic study of Maxwell Montes. Key observations include (1) dominant structural fabrics are broadly distributed and show little change in spacing relative to elevation changes of several kilometers; (2) the spacing, wavelength, and inferred amplitude of mapped structures are small, (3) interpreted extensional structures occur only in areas of steep slope, with no extension at the highest topographic levels; and (4) deformation terminates abruptly at the base of steep slopes. One implication of these observations is that topography is independent of thin-skinned, broadly distributed, Maxwell deformation. Maxwell is apparently stable, with no observed extensional collapse. We propose a ``deformation-from-below'' model for Maxwell, in which the crust deforms passively over structurally imbricated and thickened lower crust. This model may have implications for the other deformation belts.

Structural history of Maxwell Montes, Venus: Implications for Venusian mountain belt formation

NASA Astrophysics Data System (ADS)

Keep, Myra; Hansen, Vicki L.

1994-12-01

Models for Venusian mountain belt formation are important for understanding planetary geodynamic mechanisms. A range of data sets at various scales must be considered in geodynamic modelling. Long wavelength data, such as gravity and geoid to topography ratios, need constraints from smaller-scale observations of the surface. Pre-Magellan images of the Venusian surface were not of high enough resolution to observe details of surface deformation. High-resolution Magellan images of Maxwell Montes and the other deformation belts allow us to determine the nature of surface deformation. With these images we can begin to understand the constraints that surface deformation places on planetary dynamic models. Maxwell Montes and three other deformation belts (Akna, Freyja, and Danu montes) surround the highland plateau Lakshmi Planum in Venus' northern hemisphere. Maxwell, the highest of these belts, stands 11 km above mean planetary radius. We present a detailed structural and kinematic study of Maxwell Montes. Key observations include (1) dominant structure fabrics are broadly distributed and show little change in spacing relative to elevation changes of several kilometers; (2) the spacing, wavelength and inferred amplitude of mapped structures are small; (3) interpreted extensional structures occur only in areas of steep slope, with no extension at the highest topographic levels; and (4) deformation terminates abruptly at the base of steep slopes. One implications of these observations is that topography is independent of thin-skinned, broadly distributed, Maxwell deformation. Maxwell is apparently stable, with no observed extensional collapse. We propose a 'deformation-from-below' model for Maxwell, in which the crust deforms passively over structurally imbricated and thickened lower crust. This model may have implications for the other deformation belts.

Spatiotemporal patterns of stable isotopes and hydrochemistry in springs and river flow of the upper Karkheh River Basin, Iran.

PubMed

Osati, Khaled; Koeniger, Paul; Salajegheh, Ali; Mahdavi, Mohammad; Chapi, Kamran; Malekian, Arash

2014-06-01

Karst springs of the Zagros Mountains contribute a significant amount to agricultural and human water demands of western and south-western Iran. For an adequate management of available water resources in semi-arid and arid regions, sufficient hydrological monitoring is needed, and hydro-chemical and isotope hydrological data provide important additional information. About 350 water samples were collected from precipitation, river water, and karst springs of the upper part of the Karkheh River Basin (20,895 km(2)) located between 33°35(') and 34°55(') North and 46°22(') and 49°10(') East with elevations ranging from 928 to 3563 m above sea level. Sampling was conducted in monthly time resolution from August 2011 to July 2012. All samples were analysed for hydro-chemical parameters (pH, electrical conductivity, and major ions) and stable isotopes (deuterium, oxygen-18). Isotope values of precipitation indicate a local meteoric water line (Zagros MWL δ(2)H=6.8 δ(18)O+10.1; R(2)=0.99) situated between the Mediterranean MWL and Global MWL. Spring and river water isotope values vary between-7.1 and-4.1 ‰, and-38 and-25 ‰ for δ(18)O and δ(2)H, respectively, responding to winter snowmelt and evaporation. This work implements stable isotopes and hydro-chemical information of springs and river water to understand hydrological and hydro-geological interrelations in karstic semi-arid areas and helps to improve the current water resources management practices of western Iran.

Development of an arcuate fold-thrust belt as a result of basement configuration: an example from the Rocky Mountain Front Range, Montana

NASA Astrophysics Data System (ADS)

Burberry, C. M.; Cannon, D. L.; Engelder, T.; Cosgrove, J. W.

2010-12-01

The Sawtooth Range forms part of the Montana Disturbed Belt in the Front Ranges of the Rocky Mountains, along strike from the Alberta Syncline in the Canadian Rockies. The belt developed in the footwall to the Lewis Thrust during the Sevier orogeny and is similar in deformation style to the Canadian Foothills, with a series of stacked thrust sheets carrying Palaeozoic carbonates. The Sawtooth Range can be divided into an inner and outer deformed belt, separated by exposed fold structures in the overlying clastic sequence. Structures in the deformed belts plunge into the culmination of the NE-trending Scapegoat-Bannatyne trend, part of the Great Falls Tectonic Zone (GFTZ). Other mapped faults, including the Pendroy fault zone to the north, parallel this trend. A number of mechanisms have been proposed for the development of primary arcs in fold-thrust belts, including linkage of two thrust belts with different strikes, differential transport of segments of the belt, the geometry of the indentor, local plate heterogeneity and pre-existing basement configuration. Arcuate belts may also develop as a result of later bending of an initially straight orogen. In the Swift Dam area, part of the outer belt of the Sawtooth Range, the strike of the belt changes from 165 to 150. This apparent change in strike is accommodated by a sinistral lateral ramp in the Swift Dam Thrust. In addition, this outer belt becomes broader to the north in the Swift Dam region. However, the outer belt becomes extremely narrow in the Teton Canyon region to the south, and the deformation front is characterised by an intercutaneous wedge structure, rather than the trailing-edge imbricate fan seen to the north. A similar imbricate fan structure is seen to the south, in the Sun River Canyon region, corresponding well to the classic model of a deformation belt governed by a dominant thrust sheet, after Boyer & Elliot. The Sawtooth Range can be described as an active-roof duplex in the footwall to the dominant Lewis thrust slab. Analysis of the transport directions of the thrust sheets in the Range implies that the inner arcuate belt is a secondary arc, but that the later, outer arcuate belt formed by divergent transport. This two-stage development model is strongly influenced by the basement configuration. The deformation front of the outer arc is governed by NNW-striking Proterozoic normal fault structures. The entire Sawtooth Range duplex is uplifted over an earlier, NE-trending basement structure (the GFTZ), forming a termination in the Lewis slab. The interaction of these two fault trends allows the development of a linear deformation front in the foreland Jurassic-Cretaceous sequence, but an arcuate belt in the Palaeozoic carbonate sheets. Thus, the width and style of the outer arcuate belt also varies along the strike of the belt.

Weather in the Cockpit: Priorities, Sources, Delivery, and Needs in the Next Generation Air Transportation System

DTIC Science & Technology

2012-07-01

discomfort. Extreme turbulence could cause physical injuries to pilot/ passengers who are not wearing seat belts. Clear Air Turbulence (CAT) CAT... passengers who are not wearing seat belts. Generally caused by wind shear in the atmosphere where no clouds are present. Mountain Waves Fast...ways in which our analyses could inform the design of information systems. NextGen, in its mature state, envisions pilots having control over

Microbiostratigraphy of the Upper Paleocene to Middle Eocene Jahrum Formation in the Folded Zagros Zone, SW Iran

NASA Astrophysics Data System (ADS)

Izadighalati, S.; Ahmadi, V.

2017-12-01

The Jahrum Formation (Upper Paleocene to Middle Eocene) is composed of carbonate and dolomitic carbonate rocks in the Zagros Basin. The Zagros is located at the boundary between the Arabian and Eurasian lithosphere plates and represent the orogenic response to a collision between Eurasia and advancing Arabia during the Cenozoic. The study area is located in the northern part of Kuh-E-Tudej, 175 km southeast of Shiraz in the Folded Zagros Zone. The Jahrum Formation at Kuh-E-Tudej, with a thickness of 190 m, consists of medium to massive bedded limestone. The following foraminiferal index species are identified in the studied section: Fallotella alavensis, Kathina sp., Miscellanea sp., Lockhartia sp., Orbitolites shirazeinsis, Nummulites sp., Opertorbitolites sp., Dictyoconus cf. egyptiensis, Orbitolites cf. complanatus, Dictyoconus sp., Coskinolina sp., Somalina stefaninii, Discocyclina sp., Praerhapydionina sp., Coskinolina cf. liburnica, Nummulites cf. globulus, Nummulites cf. aturicus, and Alveolina sp. The age of the studied sediments ranges from Upper Paleocene to Middle Eocene. The microbiostratigraphic studies revealed four biozones based on the foraminifers identified in the studied section.

Late Miocene Coral faunas of Iran (Zagros, Aghar, Firuz abad, Fars) palaeoecology and palaeobiogeography

NASA Astrophysics Data System (ADS)

Dehbozorgi, M.; Yazdi, M.; Torabi, H.

2009-04-01

Late Miocene Corals assemblage from Zagros Iran are investigated with respect to their palaeoecology and palaeobiogeography implications. This Corals are compared with fauna from Mediterranean Tethys and the Indopacific. Small foraminifers are used for biogeography and to support paleoecology interpretation. The studied section situated in the Zagros Mishan F.m is last depositions sea. A distinct horizon characterized by Porites- Antiguastrea assemblage associated Milliolid and Rotalia is interpreted a shallow bioclastic shoal. Patch reef with a porites and faviidae assemblage are a common feature of Oligocene and Miocene coral occurrence and indicate water depth of less than 20m. The diversity of corals in this area are low and all corals are hematypic. Miocene Corals from Mishan F.m Comprise 7 genera and occur in the single horizon or patch reef. This Corals and patch reefs are compared with corals and patch reefs in Qom F.m Central Iran. This corals report from this section: Antiguastrea sp., Monastrea sp., Favites sp., Porites sp., Dichocoenia sp., Asterohelia sp., Leptoria sp. Keywords: Miocene- Iran- Mishan-Zagros- Formation- Tethys seaway- Corals- Palaeoecology- palaeobiogeography.

Application of High Resolution Topography and Remote Sensing: Imagery to the Kinematics of Fold-and-Thrust Belts

NASA Technical Reports Server (NTRS)

Rubin, Charles

1997-01-01

This report summarizes one year of funding for NASA contract NAGW-3691, Application of High Resolution Topography and Remote Sensing: Imagery to the Kinematics of Fold-and-Thrust Belts. I never received year three from NASA. The funds were to support on going tectonic and topographic studies along the front of the central Transverse Ranges and expand the topographic studies to the north. Below are results from the first two years of actual funds that I received from NASA (see attached Federal Cash Transaction Reports). The main focus of this contract was to define and understand the major tectonic processes affecting the formation and evolution of the topography in convergent tectonic settings. The results will be used to test ongoing space-based geodetic measurements and will be compared with present-day seismicity in the central Transverse Ranges and adjacent basins. Two major factors that controls topography in active regions are (1) tectonic uplift due to fault-normal compression and (2) subsequent erosion. The central Transverse and Temblor Ranges are excellent regions for these focused topographic studies. The tectonic processes leading to the mountain building are relatively straightforward and thus are easy to model. Available evidence suggests that the topography in this region is relatively young, - 3.5 Ma or less. In addition,, erosional processes may be relatively easier to model compared to larger and more ancient mountain belts. For example, in larger mountain belts, topographic relief may cause significant orographic effects and high elevation may result in part of the topography located above snowline. Both factors complicate interpretation of erosional processes that may be controlled by elevation. Mountain ranges that are significantly older may have experienced a much wider variety of erosional or climatic conditions over their lifetime. While erosion rates have certainly not been consistent in the Transverse or Temblor ranges over its 3.5 Ma lifetime, we are sure that the region was spared the Pleistocene glaciation that affected parts of the Sierra Nevada Range.

Arsenic in groundwaters in the Northern Appalachian Mountain belt: A review of patterns and processes

NASA Astrophysics Data System (ADS)

Peters, Stephen C.

2008-07-01

Naturally occurring arsenic in the bedrock of the Northern Appalachian Mountain belt was first recognized in the late 19th century. The knowledge of the behavior of arsenic in groundwater in this region has lagged behind nearly a century, with the popular press reporting on local studies in the early 1980s, and most peer-reviewed research articles on regional patterns conducted and written in the late 1990s and early 2000s. Research reports have shown that within this high arsenic region, between 6% and 22% of households using private drinking water wells contain arsenic in excess of 10 µg/L, the United States Environmental Protection Agency's maximum contaminant level. In nearly all reports, arsenic in drinking water was derived from naturally occurring geologic sources, typically arsenopyrite, substituted sulfides such as arsenian pyrite, and nanoscale minerals such as westerveldite. In most studies, arsenic concentrations in groundwater were controlled by pH dependent adsorption to mineral surfaces, most commonly iron oxide minerals. In some cases, reductive dissolution of iron minerals has been shown to increase arsenic concentrations in groundwater, more commonly associated with anthropogenic activities such as landfills. Evidence of nitrate reduction promoting the presence of arsenic(V) and iron(III) minerals in anoxic environments has been shown to occur in surface waters, and in this manuscript we show this process perhaps applies to groundwater. The geologic explanation for the high arsenic region in the Northern Appalachian Mountain belt is most likely the crustal recycling of arsenic as an incompatible element during tectonic activity. Accretion of multiple terranes, in particular Avalonia and the Central Maine Terrane of New England appear to be connected to the presence of high concentrations of arsenic. Continued tectonic activity and recycling of these older terranes may also be responsible for the high arsenic observed in the Triassic rift basins, e.g. the Newark Basin. There are only two well-known cases of anthropogenic contamination of the environment in the northern Appalachian Mountain belt, both of which are industrial sites with surface contamination at that infiltrated the local groundwater.

Age and tectonic setting of the Mesozoic McCoy Mountains Formation in western Arizona, USA

USGS Publications Warehouse

Spencer, J.E.; Richard, S.M.; Gehrels, G.E.; Gleason, J.D.; Dickinson, W.R.

2011-01-01

The McCoy Mountains Formation consists of Upper Jurassic to Upper Cretaceous siltstone, sandstone, and conglomerate exposed in an east-west-trending belt in southwestern Arizona and southeastern California. At least three different tectonic settings have been proposed for McCoy deposition, and multiple tectonic settings are likely over the ~80 m.y. age range of deposition. U-Pb isotopic analysis of 396 zircon sand grains from at or near the top of McCoy sections in the southern Little Harquahala, Granite Wash, New Water, and southern Plomosa Mountains, all in western Arizona, identifi ed only Jurassic or older zircons. A basaltic lava fl ow near the top of the section in the New Water Mountains yielded a U-Pb zircon date of 154.4 ?? 2.1 Ma. Geochemically similar lava fl ows and sills in the Granite Wash and southern Plomosa Mountains are inferred to be approximately the same age. We interpret these new analyses to indicate that Mesozoic clastic strata in these areas are Upper Jurassic and are broadly correlative with the lowermost McCoy Mountains Formation in the Dome Rock, McCoy, and Palen Mountains farther west. Six samples of numerous Upper Jurassic basaltic sills and lava fl ows in the McCoy Mountains Formation in the Granite Wash, New Water, and southern Plomosa Mountains yielded initial ??Nd values (at t = 150 Ma) of between +4 and +6. The geochemistry and geochronology of this igneous suite, and detrital-zircon geochronology of the sandstones, support the interpretation that the lower McCoy Mountains Formation was deposited during rifting within the western extension of the Sabinas-Chihuahua-Bisbee rift belt. Abundant 190-240 Ma zircon sand grains were derived from nearby, unidentifi ed Triassic magmatic-arc rocks in areas that were unaffected by younger Jurassic magmatism. A sandstone from the upper McCoy Mountains Formation in the Dome Rock Mountains (Arizona) yielded numerous 80-108 Ma zircon grains and almost no 190-240 Ma grains, revealing a major reorganization in sediment-dispersal pathways and/or modifi cation of source rocks that had occurred by ca. 80 Ma. ?? 2011 Geological Society of America.

The Ross Orogen and Lachlan Fold Belt in Marie Byrd Land, Northern Victoria Land and New Zealand: implication for the tectonic setting of the Lachlan Fold Belt in Antarctica

USGS Publications Warehouse

Bradshaw, J.D.

2007-01-01

Correlation of the Cambrian Delamerian Orogen of Australia and Ross Orogen of the Transantarctic Mountains widely accepted but the extension of the adjacent Lachlan Orogen into Antarctica is controversial. Outside the main Ross-Delamerian belt, evidence of this orogeny is preserved at Mt Murphy in Marie Byrd Land and the in Takaka Terrane of New Zealand. In all pre-break- configurations of the SW Pacific, these two areas are far removed from the Ross-Delamerian belt. Evidence from conglomerates in the Takaka Terrane, however, shows that in Late Cambrian times it was adjacent to the Ross Orogen. This indicates major tectonic displacements within Gondwana after the Cambrian and before break-up. The Lachlan Orogen formed in an extensional belt in a supra-subduction zone setting and the Cambrian rocks of Marie Byrd Land and New Zealand are interpreted as parts of a rifted continental ribbon on the outboard side of the Lachlan belt.

Regional geology and geophysics of the Jemez Mountains

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, F.G.

1973-08-01

The western margin of the Rocky Mountain tectonic belt is the initial site for the Los Alamos Geothermal Project. lgneous activity in the area culminated with the formation of a collapsed volcanic caldera and the deposition of thick beds of tuff. Geophysical studies indicate that the region is one of relatively highterrestrial heat flow, low-crustal density, low-crustal seismic velocities, low-crustal magnetoelectric impedance, and thin crust. 34 references. (auth)

Onion Park Research Natural Area: Botanical and ecological resources inventory, mapping and analysis with recommendations towards the development of a long-term monitoring and research program

Treesearch

Earle F. Layser

1992-01-01

Onion Park is a floristically rich naturally occurring mountain meadow and wetland complex which is surrounded by subalpine forest. The grass- and wetlands comprising the Park contribute biological diversity to an otherwise predominantly lodgepole pine-forested, subalpine setting. Onion Park is located at 7400' elevation in the Little Belt Mountains, five miles...

Presentations - Freeman, L.K., 2016 | Alaska Division of Geological &

Science.gov Websites

Communications Alaska Geologic Data Index (AGDI) Volcanology Alaska Volcano Observatory (AVO) Mineral Resources ) Keywords Ambler Mineral Belt; Apollo Mine; Arctic Prospect; Bee Creek Prospect; Bokan Mountain; Bornite

Tectonics of Lakshmi Planum, Venus - Tests for Magellan

NASA Technical Reports Server (NTRS)

Grimm, Robert E.; Phillips, Roger J.

1990-01-01

The origin of Lakshmi Planum and its surrounding mountain belts remains an important unresolved element in the global tectonic framework of Venus. From the perspective of gravity signature and potential driving forces, the mantle upwelling model is the simplest, and its principal failure, that it cannot produce radial shortening on the uplift periphery, may be resolved if the lithosphere is laterally heterogeneous. The preferred model consists of a hot mantle plume rising beneath a preexisting block of tessera. The lithosphere is weakened at this hotter and presumably thicker crust, and the outward near-surface flow is attenuated at the peripheral discontinuity in lithospheric strength. Crustal thickening and mountain belt formation occur there. Several criteria are proposed to test this 'tessera-plume' model together with its competitors at the higher resolution in both imaging and gravity afforded by the Magellan mission.

Tectonics of Lakshmi Planum, Venus - Tests for Magellan

NASA Astrophysics Data System (ADS)

Grimm, Robert E.; Phillips, Roger J.

1990-08-01

The origin of Lakshmi Planum and its surrounding mountain belts remains an important unresolved element in the global tectonic framework of Venus. From the perspective of gravity signature and potential driving forces, the mantle upwelling model is the simplest, and its principal failure, that it cannot produce radial shortening on the uplift periphery, may be resolved if the lithosphere is laterally heterogeneous. The preferred model consists of a hot mantle plume rising beneath a preexisting block of tessera. The lithosphere is weakened at this hotter and presumably thicker crust, and the outward near-surface flow is attenuated at the peripheral discontinuity in lithospheric strength. Crustal thickening and mountain belt formation occur there. Several criteria are proposed to test this 'tessera-plume' model together with its competitors at the higher resolution in both imaging and gravity afforded by the Magellan mission.

The gabbro-eclogite phase transition and the elevation of mountain belts on Venus

NASA Astrophysics Data System (ADS)

Namiki, Noriyuki; Solomon, Sean C.

1992-12-01

Among the four mountain belts surrounding Lakshmi Planum, Maxwell Montes is the highest and stands up to 11 km above the mean planetary radius and 7 km above Lakshmi Planum. The bulk composition and radioactive heat production of the crust on Venus, where measured, are similar to those of terrestrial tholeiitic basalt. Because the thickness of the low-density crust may be limited by the gabbro-garnet granulite-eclogite phase transitions, the 7-11 km maximum elevation of Maxwell Montes is difficult to understand except in the unlikely situation that the crust contains a large volume of magma. A possible explanation is that the base of the crust is not in phase equilibrium. It has been suggested that under completely dry conditions, the gabbro-eclogite phase transition takes place by solid-state diffusion and may require a geologically significant time to run to completion. Solid-state diffusion is a strongly temperature-dependent process. In this paper we solve the thermal evolution of the mountain belt to attempt to constrain the depth of the gabbro-eclogite transition and thus to assess this hypothesis quantitatively. The one-dimensional heat equation is solved numerically by a finite difference approximation. The deformation of the horizontally shortening crustal and mantle portions of the thermal boundary layer is assumed to occur by pure shear, and therefore the vertical velocity is given by the product of the horizontal strain rate and depth.

The gabbro-eclogite phase transition and the elevation of mountain belts on Venus

NASA Technical Reports Server (NTRS)

Namiki, Noriyuki; Solomon, Sean C.

1992-01-01

Among the four mountain belts surrounding Lakshmi Planum, Maxwell Montes is the highest and stands up to 11 km above the mean planetary radius and 7 km above Lakshmi Planum. The bulk composition and radioactive heat production of the crust on Venus, where measured, are similar to those of terrestrial tholeiitic basalt. Because the thickness of the low-density crust may be limited by the gabbro-garnet granulite-eclogite phase transitions, the 7-11 km maximum elevation of Maxwell Montes is difficult to understand except in the unlikely situation that the crust contains a large volume of magma. A possible explanation is that the base of the crust is not in phase equilibrium. It has been suggested that under completely dry conditions, the gabbro-eclogite phase transition takes place by solid-state diffusion and may require a geologically significant time to run to completion. Solid-state diffusion is a strongly temperature-dependent process. In this paper we solve the thermal evolution of the mountain belt to attempt to constrain the depth of the gabbro-eclogite transition and thus to assess this hypothesis quantitatively. The one-dimensional heat equation is solved numerically by a finite difference approximation. The deformation of the horizontally shortening crustal and mantle portions of the thermal boundary layer is assumed to occur by pure shear, and therefore the vertical velocity is given by the product of the horizontal strain rate and depth.

The thrust belt in Southwest Montana and east-central Idaho

USGS Publications Warehouse

Ruppel, Edward T.; Lopez, David A.

1984-01-01

The leading edge of the Cordilleran fold and thrust in southwest Montana appears to be a continuation of the edge of the Wyoming thrust belt, projected northward beneath the Snake River Plain. Trces of the thrust faults that form the leading edge of the thrust belts are mostly concealed, but stratigraphic and structural evidence suggests that the belt enters Montana near the middle of the Centennial Mountains, continues west along the Red Rock River valley, and swings north into the Highland Mountains near Butte. The thrust belt in southwest Montana and east-central Idaho includes at least two major plates -- the Medicine Lodge and Grasshopper thrust plates -- each of which contains a distinctive sequence of rocks, different in facies and structural style from those of the cratonic region east of the thrust belt. The thrust plates are characterized by persuasive, open to tight and locally overturned folds, and imbricate thrust faults, structural styles unusual in Phanerozoic cratonic rocks. The basal decollement zones of the plates are composed of intensely sheared, crushed, brecciated, and mylonitized rocks, the decollement at the base of the Medicine Lodge plate is as much as 300 meters thick. The Medicine Lodge and Grasshopper thrust plates are fringed on the east by a 10- to 50-kilometer-wide zone of tightly folded rocks cut by imbricate thrust fauls, a zone that forms the eastern margin of the thrust belt in southwest Montana. The frontal fold and thrust zone includes rocks that are similar to those of the craton, even though they differ in details of thickness, composition, or stratigraphic sequence. The zone is interpreted to be one of terminal folding and thrusting in cratonic rocks overridden by the major thrust plates from farther west. The cratonic rocks were drape-folded over rising basement blocks that formed a foreland bulge in front of the thrust belt. The basement blocks are bounded by steep faults of Proterozoic ancestry, which also moved as tear faults during thrusting, and seem to have controlled the curving patterns of salients and reentrants at the leading edge of the thrust belt. Radiometric and stratiographic evidence shows that the thrust belt was in its present position by about 75 million year go.

Heavy metal concentrations and speciation in riverine sediments and the risks posed in three urban belts in the Haihe Basin.

PubMed

Zhang, Chao; Shan, Baoqing; Tang, Wenzhong; Dong, Lixin; Zhang, Wenqiang; Pei, Yuansheng

2017-05-01

Heavy metal (Cr, Cu, Ni, Pb, and Zn) pollution and the risks posed by the heavy metals in riverine sediments in a mountainous urban-belt area (MB), a mountain-plain urban-belt area (MPB), and a plain urban-belt area (PB) in the Haihe Basin, China, were assessed. The enrichment factors indicated that the sediments were more polluted with Cu and Zn than with the other metals, especially in the MPB. The sediments in the MPB were strongly affected by Cu and Zn inputs from anthropogenic sources. The risk assessment codes and individual contamination factors showed that Zn was mobile and posed ecological risks, the exchangeable fractions being 21.1%, 21.2%, and 19.2% of the total Zn concentrations in the samples from the MB, MPB, and PB, respectively. Cr, Cu, and Zn in the sediments from the MPB were potentially highly bioavailable because the non-residual fractions were 56.2%, 54.9%, and 56.5%, respectively, of the total concentrations. The potential risks posed by the heavy metals (determined from the chemical fractions of the heavy metals) in the different areas generally decreased in the order MPB > MB > PB. Pictorial representation of cluster analysis results showed that urbanization development level could cause Cr and Zn pollution in the urban riverine sediments to become more severe. Copyright © 2017 Elsevier Inc. All rights reserved.

Permafrost in the Himalayas: specific characteristics, evolution vs. climate change and impacts on potential natural hazards

NASA Astrophysics Data System (ADS)

Fort, Monique

2015-04-01

Mountain environments are very sensitive to climate change, yet assessing the potential impacts of these changes is not easy because of the complexity and diversity of mountain systems. The Himalayan permafrost belt presents three main specificities: (1) it develops in a geodynamically active mountain, which means that the controlling factors are not only temperature but also seismo-tectonic activity; (2) due to the steepness of the southern flank of the Greater Himalaya and potential large scale rock failures, permafrost evidence manifests itself best in the inner valleys and on the northern, arid side of the Himalayas (elevations >4000m); (3) the east-west strike of the mountain range creates large spatial discontinuity in the "cold" belt, mostly related to precipitation nature and availability. Only limited studies have been carried to date, and there is no permanent "field laboratory", nor continuous records but a few local studies. Based on preliminary observations in the Nepal Himalayas (mostly in Mustang and Dolpo districts), and Indian Ladakh, we present the main features indicating the existence of permafrost (either continuous or discontinuous). Rock-glaciers are quite well represented, though their presence may be interpreted as a combined result from both ground ice and large rock collapse. The precise altitudinal zonation of permafrost belt (specifying potential permafrost, probable permafrost, observed permafrost belts) still requires careful investigations in selected areas. Several questions arise when considering the evolution of permafrost in a context of climate change, with its impacts on the development of potential natural hazards that may affect the mountain population. Firstly, permafrost degradation (ground ice melting) is a cause of mountain slope destabilization. When the steep catchments are developed in frost/water sensitive bedrock (shales and marls) and extend to high elevations (as observed in Mustang or Dolpo), it would supply more mass-wasting and debris-flow events and may directly threat the infrastructures recently built to unlock these remote areas. Secondly, acceleration of permafrost degradation might also affect the steepest rock walls (as in Khumbu, Manang and Mustang Himals) and cause rock avalanches that could impact nearby settlements, as suggested by relicts of past events. Lastly, ground ice is a hidden source of water in areas without permanent glacial ice. In a context of global warming this non-renewable resource would be depleted and no longer available for the population living in these areas, all the more as growing tourism activities are increasing the demand for water consumption that may conflicts with irrigated agricultural uses down valley. More in-situ observations and long-term monitoring studies should certainly be useful to understand climate trends hence permafrost evolution and their consequences in order to help mountain populations of the cold, arid Himalayas to adjust to progressive changes in their environmental conditions and resources.

Crustal structure and tectonics of the Hidaka Collision Zone, Hokkaido (Japan), revealed by vibroseis seismic reflection and gravity surveys

NASA Astrophysics Data System (ADS)

Arita, Kazunori; Ikawa, Takashi; Ito, Tanio; Yamamoto, Akihiko; Saito, Matsuhiko; Nishida, Yasunori; Satoh, Hideyuki; Kimura, Gaku; Watanabe, Teruo; Ikawa, Takeshi; Kuroda, Toru

1998-05-01

This study is the first integrated geological and geophysical investigation of the Hidaka Collision Zone in southern Central Hokkaido, Japan, which shows complex collision tectonics with a westward vergence. The Hidaka Collision Zone consists of the Idon'nappu Belt (IB), the Poroshiri Ophiolite Belt (POB) and the Hidaka Metamorphic Belt (HMB) with the Hidaka Belt from west to east. The POB (metamorphosed ophiolites) is overthrust by the HMB (steeply eastward-dipping palaeo-arc crust) along the Hidaka Main Thrust (HMT), and in turn, thrusts over the Idon'nappu Belt (melanges) along the Hidaka Western Thrust (HWT). Seismic reflection and gravity surveys along a 20-km-long traverse across the southern Hidaka Mountains revealed hitherto unknown crustal structures of the collision zone such as listric thrusts, back thrusts, frontal thrust-and-fold structures, and duplex structures. The main findings are as follows. (1) The HMT, which dips steeply at the surface, is a listric fault dipping gently at a depth of ˜7 km beneath the eastern end of the HMB, and cutting across the lithological boundaries and schistosity of the Hidaka metamorphic rocks. (2) A second reflector is detected 1 km below the HMT reflector. The intervening part between these two reflectors is inferred to be the POB, which is only little exposed at the surface. This inference is supported by the high positive Bouguer anomalies along the Hidaka Mountains. (3) The shallow portion of the IB at the front of the collision zone has a number of NNE-dipping reflectors, indicative of imbricated fold-and-thrust structures. (4) Subhorizontal reflectors at a depth of 14 km are recognized intermittently at both sides of the seismic profile. These reflectors may correspond to the velocity boundary (5.9-6.6 km/s) previously obtained from seismic refraction profiling in the northern Hidaka Mountains. (5) These crustal structures as well as the back thrust found in the eastern end of the traverse represent characteristics of collisional tectonics resulting from the two collisional events since the Early Tertiary.

Basin-mountain structures and hydrocarbon exploration potential of west Junggar orogen in China

NASA Astrophysics Data System (ADS)

Wu, X.; Qi, X.; Zheng, M.

2015-12-01

Situated in northern Xinjiang, China, in NE-SW trend, West Junggar Orogen is adjacent to Altai fold belt on the north with the Ertix Fault as the boundary, North Tianshan fold belt on the south with the Ebinur Lake Strike-slip Fault as the boundary, and the Junggar Basin on the southeast with Zaire-Genghis Khan-Hala'alat fold belt as the boundary. Covering an area of about 10×104 km2 in China, there are medium and small intermontane basins, Burqin-Fuhai, Tacheng, Hefeng and Hoxtolgay, distributing inside the orogen. Tectonically West Junggar Orogen lies in the middle section of the Palaeo-Asian tectonic domain where the Siberia, Kazakhstan and Tarim Plates converge, and is the only orogen trending NE-SW in the Palaeo-Asian tectonic domain. Since the Paleozoic, the orogen experienced pre-Permian plate tectonic evolution and post-Permian intra-plate basin evolution. Complex tectonic evolution and multi-stage structural superimposition not only give rise to long term controversial over the basin basement property but also complex basin-mountain coupling relations, structures and basin superimposition modes. According to analysis of several kinds of geological and geophysical data, the orogen was dominated by compressive folding and thrust napping from the Siberia plate in the north since the Late Paleozoic. Compressive stress weakened from north to south, corresponding to subdued vertical movement and enhanced horizontal movement of crustal surface from north to south, and finally faded in the overthrust-nappe belt at the northwest margin of the Junggar Basin. The variation in compressive stress is consistent with the surface relief of the orogen, which is high in the north and low in the south. There are two kinds of basin-mountain coupling relationships, i.e. high angle thrusting and overthrusting and napping, and two kinds of basin superimposition modes, i.e. inherited and progressive, and migrating and convulsionary modes. West Junggar orogen has rich oil and gas shows. Tacheng Basin, north faulted fold belt in the Heshituoluogai basin, and Hongyan fault bench zone in north Ulungur Depression in the Junggar Basin are promising areas for hydrocarbon exploration.

Limited fluid in carbonate-shale hosted thrust faults of the Rocky Mountain Fold-and-Thrust Belt (Sun River Canyon, Montana)

NASA Astrophysics Data System (ADS)

OBrien, V. J.; Kirschner, D. L.

2001-12-01

It is widely accepted that fluids play a fundamental role in the movement of thrust faults in foreland fold-and-thrust belts. We have begun a combined structure-geochemistry study of faults in the Rocky Mountain fold-and-thrust belt in order to provide more insight into the occurrence and role(s) of fluid in the deformation of thrust faults. We focus on faults exposed in the Sun River Canyon of Montana, an area that contains some of the best exposures of the Rocky Mountain fold-and-thrust belt in the U.S. Samples were collected from two well exposed thrusts in the Canyon -- the Diversion and French thrusts. Both faults have thrust Mississippian dolostones over Cretaceous shales. Displacement exceeds several kilometers. Numerous small-displacement, subsidiary faults characterize the deformation in the hanging wall carbonates. The footwall shales accommodated more penetrative deformation, resulting in well developed foliation and small-scale folds. Stable isotope data have been obtained from host rock samples and veins from these faults. The data delimit an arcuate trend in oxygen-carbon isotope space. Approximately 50 host rock carbonate samples from the hanging walls have carbon and oxygen isotope values ranging from +3 to 0 and 28 to 19 per mil, respectively. There is no apparent correlation between isotopic values and distance from thrust fault at either locality. Fifteen samples of fibrous slickensides on small-displacement faults in the hanging walls have similar carbon and lower oxygen isotope values (down to 16 per mil). And 15 veins that either post-date thrusting or are of indeterminate origin have carbon and oxygen isotope values down to -3 and12 per mil, respectively. The isotopic data collected during the initial stages of this project are similar to some results obtained several hundred kilometers north in the Front Ranges of the Canadian Rockies (Kirschner and Kennedy, JGR 2000) and in carbonate fold-thrust belts of the Swiss Helvetic Alps and Italian Apennines. These data are consistent with limited infiltration of fluid through fractures and minor faults into hanging walls of large-displacement thrust faults.

Geotechnical Risk Classification for Underground Mines / Klasyfikacja Poziomu Zagrożenia Geotechnicznego W Kopalniach Podziemnych

NASA Astrophysics Data System (ADS)

Mishra, Ritesh Kumar; Rinne, Mikael

2015-03-01

Underground mining activities are prone to major hazards largely owing to geotechnical reasons. Mining combined with the confined working space and uncertain geotechnical data leads to hazards having the potential of catastrophic consequences. These incidents have the potential of causing multiple fatalities and large financial damages. Use of formal risk assessment in the past has demonstrated an important role in the prediction and prevention of accidents in risk prone industries such as petroleum, nuclear and aviation. This paper proposes a classification system for underground mining operations based on their geotechnical risk levels. The classification is done based on the type of mining method employed and the rock mass in which it is carried out. Mining methods have been classified in groups which offer similar geotechnical risk. The rock mass classification has been proposed based on bulk rock mass properties which are collected as part of the routine mine planning. This classification has been subdivided for various stages of mine planning to suit the extent of available data. Alpha-numeric coding has been proposed to identify a mining operation based on the competency of rock and risk of geotechnical failures. This alpha numeric coding has been further extended to identify mining activity under `Geotechnical Hazard Potential (GHP)'. GHP has been proposed to be used as a preliminary tool of risk assessment and risk ranking for a mining activity. The aim of such classification is to be used as a guideline for the justification of a formal geotechnical risk assessment. Górnictwo podziemne pociąga za sobą różnorakie zagrożenia spowodowane przez uwarunkowania geotechniczne. Urabianie złoża w połączeniu z pracą w zamkniętej przestrzeni oraz z niepewnymi danymi geotechnicznymi powodować może zagrożenia, które w konsekwencji prowadzić mogą do wypadków, a te potencjalnie powodować mogą skutki śmiertelne dla osób oraz poważne straty finansowe. Wykorzystanie przepisowych metod oceny ryzyka w przeszłości wykazało ich istotną rolę w przewidywaniu i zapobieganiu wypadkom i zagrożeniom w dziedzinach najbardziej na nie narażonych, a więc w przemyśle naftowym, jądrowym oraz w lotnictwie. W niniejszej pracy zaproponowano system klasyfikacji operacji w górnictwie podziemnym w oparciu o poziom zagrożenia geotechnicznego. Klasyfikacji dokonano uwzględniając zastosowana metodę urabiania oraz rodzaj urabianego górotworu. Przedstawiono kategorie metod urabiania o podobnym poziomie zagrożenia geotechnicznego. Zaproponowano klasyfikację górotworu na podstawie właściwości wytrzymałościowych określanych rutynowo na etapie planowania kopalni. Klasyfikacja ta podzielona jest na kilka pod-etapów odpowiadającym etapom planowania kopalni, tak by uwzględnić zakres dostępnych na każdym etapie danych. Zastosowano kodowanie alfanumeryczne dla wskazania metody urabiania w oparciu o dane o zwięzłości skały i ryzyko zagrożenia geotechnicznego. Kodowanie alfanumeryczne zostało następnie rozszerzone dla identyfikacji operacji górniczych w ramach kategorii "Poziom zagrożenia geotechnicznego". Wskaźnik ten wykorzystywany jest jako wstępne narzędzie oceny ryzyka wystąpienia zagrożenia oraz klasyfikacji poziomu zagrożenia związanego z działalnością górniczą. Celem takiej klasyfikacji jest jej wykorzystanie jako wytycznych i uzasadnienia dla stosowania formalnych metod oceny ryzyka geotechnicznego.

Venus tectonics: initial analysis from magellan.

PubMed

Solomon, S C; Head, J W; Kaula, W M; McKenzie, D; Parsons, B; Phillips, R J; Schubert, G; Talwani, M

1991-04-12

Radar imaging and altimetry data from the Magellan mission have revealed a diversity of deformational features at a variety of spatial scales on the Venus surface. The plains record a superposition of different episodes of deformation and volcanism; strain is both areally distributed and concentrated into zones of extension and shortening. The common coherence of strain patterns over hundreds of kilometers implies that many features in the plains reflect a crustal response to mantle dynamic processes. Ridge belts and mountain belts represent successive degrees of lithospheric shortening and crustal thickening; the mountain belts also show widespread evidence for extension and collapse both during and following crustal compression. Venus displays two geometrical patterns of concentrated lithospheric extension: quasi-circular coronae and broad rises with linear rift zones; both are sites of significant volcanism. No long, large-offset strike-slip faults have been observed, although limited local horizontal shear is accommodated across many zones of crustal shortening. In general, tectonic features on Venus are unlike those in Earth's oceanic regions in that strain typically is distributed across broad zones that are one to a few hundred kilometers wide, and separated by stronger and less deformed blocks hundreds of kilometers in width, as in actively deforming continental regions on Earth.

Evidence for large-magnitude, post-Eocene extension in the northern Shoshone Range, Nevada, and its implications for Carlin-type gold deposits in the lower plate of the Roberts Mountains allochthon

USGS Publications Warehouse

Colgan, Joseph P.; Henry, Christopher D.; John, David A.

2014-01-01

The northern Shoshone and Toiyabe Ranges in north-central Nevada expose numerous areas of mineralized Paleozoic rock, including major Carlin-type gold deposits at Pipeline and Cortez. Paleozoic rocks in these areas were previously interpreted to have undergone negligible postmineralization extension and tilting, but here we present new data that suggest major post-Eocene extension along west-dipping normal faults. Tertiary rocks in the northern Shoshone Range crop out in two W-NW–trending belts that locally overlie and intrude highly deformed Lower Paleozoic rocks of the Roberts Mountains allochthon. Tertiary exposures in the more extensive, northern belt were interpreted as subvertical breccia pipes (intrusions), but new field data indicate that these “pipes” consist of a 35.8 Ma densely welded dacitic ash flow tuff (informally named the tuff of Mount Lewis) interbedded with sandstones and coarse volcaniclastic deposits. Both tuff and sedimentary rocks strike N-S and dip 30° to 70° E; the steeply dipping compaction foliation in the tuffs was interpreted as subvertical flow foliation in breccia pipes. The southern belt along Mill Creek, previously mapped as undivided welded tuff, includes the tuff of Cove mine (34.4 Ma) and unit B of the Bates Mountain Tuff (30.6 Ma). These tuffs dip 30° to 50° east, suggesting that their west-dipping contacts with underlying Paleozoic rocks (previously mapped as depositional) are normal faults. Tertiary rocks in both belts were deposited on Paleozoic basement and none appear to be breccia pipes. We infer that their present east tilt is due to extension on west-dipping normal faults. Some of these faults may be the northern strands of middle Miocene (ca. 16 Ma) faults that cut and tilted the 34.0 Ma Caetano caldera ~40° east in the central Shoshone Range (

Petrology and geochemistry of the Grouse Canyon Member of the Belted Range Tuff, Rock-Mechanics Drift, U12g Tunnel, Nevada Test Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Connolly, J.R.; Mansker, W.L.; Hicks, R.

1983-04-01

G-Tunnel at Nevada Test Site (NTS) is the site of thermal and thermomechanical experiments examining the feasibility of emplacing heat-producing nuclear wastes in silicic tuffs. This report describes the general stratigraphy, mineralogy, and bulk chemistry of welded portions of the Grouse Canyon Member of the Belted Range Tuff, the unit in which most of these experiments will be performed. The geologic characteristics of the Grouse Canyon Member are compared with those of the Topopah Spring Member of the Paintbrush Tuff, presently the preferred horizon for an actual waste repository at Yucca Mountain, near the southwest boundary of Nevada Test Site.more » This comparison suggests that test results obtained in welded tuff from G-Tunnel are applicable, with limitations, to evaluation of the Topopah Spring Member at Yucca Mountain.« less

Strong Genetic Differentiation of Submerged Plant Populations across Mountain Ranges: Evidence from Potamogeton pectinatus in Iran

PubMed Central

Abbasi, Shabnam; Afsharzadeh, Saeed; Saeidi, Hojjatollah; Triest, Ludwig

2016-01-01

Biogeographic barriers for freshwater biota can be effective at various spatial scales. At the largest spatial scale, freshwater organisms can become genetically isolated by their high mountain ranges, vast deserts, and inability to cross oceans. Isolation by distance of aquatic plants is expected to be stronger across than alongside mountain ridges whereas the heterogeneity of habitats among populations and temporary droughts may influence connectivity and hamper dispersal. Suitable aquatic plant habitats became reduced, even for the widespread submerged Potamogeton pectinatus L. (also named Stuckenia pectinata) giving structure to various aquatic habitats. We compared the level of genetic diversity in a heterogeneous series of aquatic habitats across Iran and tested their differentiation over distances and across mountain ranges (Alborz and Zagros) and desert zones (Kavir), with values obtained from temperate region populations. The diversity of aquatic ecosystems across and along large geographic barriers provided a unique ecological situation within Iran. P. pectinatus were considered from thirty-six sites across Iran at direct flight distances ranging from 20 to 1,200 km. Nine microsatellite loci revealed a very high number of alleles over all sites. A PCoA, NJT clustering and STRUCTURE analysis revealed a separate grouping of individuals of southeastern Iranian sites and was confirmed by their different nuclear ITS and cpDNA haplotypes thereby indicating an evolutionary significant unit (ESU). At the level of populations, a positive correlation between allelic differentiation Dest with geographic distance was found. Individual-based STRUCTURE analysis over 36 sites showed 7 genetic clusters. FST and RST values for ten populations reached 0.343 and 0.521, respectively thereby indicating that allele length differences are more important and contain evolutionary information. Overall, higher levels of diversity and a stronger differentiation was revealed among Iranian P. pectinatus than previously observed for temperate European regions, due to regional differences across mountain ranges over long distances. PMID:27560947

Strong Genetic Differentiation of Submerged Plant Populations across Mountain Ranges: Evidence from Potamogeton pectinatus in Iran.

PubMed

Abbasi, Shabnam; Afsharzadeh, Saeed; Saeidi, Hojjatollah; Triest, Ludwig

2016-01-01

Biogeographic barriers for freshwater biota can be effective at various spatial scales. At the largest spatial scale, freshwater organisms can become genetically isolated by their high mountain ranges, vast deserts, and inability to cross oceans. Isolation by distance of aquatic plants is expected to be stronger across than alongside mountain ridges whereas the heterogeneity of habitats among populations and temporary droughts may influence connectivity and hamper dispersal. Suitable aquatic plant habitats became reduced, even for the widespread submerged Potamogeton pectinatus L. (also named Stuckenia pectinata) giving structure to various aquatic habitats. We compared the level of genetic diversity in a heterogeneous series of aquatic habitats across Iran and tested their differentiation over distances and across mountain ranges (Alborz and Zagros) and desert zones (Kavir), with values obtained from temperate region populations. The diversity of aquatic ecosystems across and along large geographic barriers provided a unique ecological situation within Iran. P. pectinatus were considered from thirty-six sites across Iran at direct flight distances ranging from 20 to 1,200 km. Nine microsatellite loci revealed a very high number of alleles over all sites. A PCoA, NJT clustering and STRUCTURE analysis revealed a separate grouping of individuals of southeastern Iranian sites and was confirmed by their different nuclear ITS and cpDNA haplotypes thereby indicating an evolutionary significant unit (ESU). At the level of populations, a positive correlation between allelic differentiation Dest with geographic distance was found. Individual-based STRUCTURE analysis over 36 sites showed 7 genetic clusters. FST and RST values for ten populations reached 0.343 and 0.521, respectively thereby indicating that allele length differences are more important and contain evolutionary information. Overall, higher levels of diversity and a stronger differentiation was revealed among Iranian P. pectinatus than previously observed for temperate European regions, due to regional differences across mountain ranges over long distances.

Evolution of Late Miocene to Contemporary Displacement Transfer Between the Northern Furnace Creek and Southern Fish Lake Valley Fault Zones and the Central Walker Lane, Western Great Basin, Nevada

NASA Astrophysics Data System (ADS)

Oldow, J. S.; Geissman, J. W.

2013-12-01

Late Miocene to contemporary displacement transfer from the north Furnace Creek (FCF) and southern Fish Lake Valley (FLVF) faults to structures in the central Walker Lane was and continues to be accommodated by a belt of WNW-striking left-oblique fault zones in the northern part of the southern Walker Lane. The WNW fault zones are 2-9 km wide belts of anastomosing fault strands that intersect the NNW-striking FCF and southern FLVF in northern Death Valley and southern Fish Lake Valley, respectively. The WNW fault zones extend east for over 60 km where they merge with a 5-10 km wide belt of N10W striking faults that marks the eastern boundary of the southern Walker Lane. Left-oblique displacement on WNW faults progressively decreases to the east, as motion is successively transferred northeast on NNE-striking faults. NNE faults localize and internally deform extensional basins that each record cumulative net vertical displacements of between 3.0 and 5.2 km. The transcurrent faults and associated basins decrease in age from south to north. In the south, the WNW Sylvania Mountain fault system initiated left-oblique motion after 7 Ma but does not have evidence of contemporary displacement. Farther north, the left-oblique motion on the Palmetto Mountain fault system initiated after 6.0 to 4.0 Ma and has well-developed scarps in Quaternary deposits. Cumulative left-lateral displacement for the Sylvania Mountain fault system is 10-15 km, and is 8-12 km for the Palmetto fault system. The NNE-striking faults that emanate from the left-oblique faults merge with NNW transcurrent faults farther north in the eastern part of the Mina deflection, which links the Owens Valley fault of eastern California to the central Walker Lane. Left-oblique displacement on the Sylvania Mountain and Palmetto Mountain fault zones deformed the Furnace Creek and Fish Lake Valley faults. Left-oblique motion on Sylvania Mountain fault deflected the FCF into the 15 km wide Cucomungo Canyon restraining bend, segmented the >3.0 km deep basin underlying southern Fish Lake Valley, and formed a 2 km wide restraining bend in the FLVF. Part of the left-oblique motion on the Palmetto Mountain fault zone crosses Fish Lake Valley and offsets the FLVF in a 3 km wide restraining bend with the remainder being taken-up by NNW structures along the eastern side of southern Fish Lake Valley.

An assessment of the crustal remelting hypothesis for volcanism in the Freyja Montes deformation zone

NASA Astrophysics Data System (ADS)

Namiki, Noriyuki; Solomon, Sean C.

1991-06-01

The linear mountain belts of Ishtar Terra on Venus are notable for their topographic relief and slope and for the intensity of surface deformation. The mountains surround the highland plain Lakshmi Planum, the site of two major paterae and numerous other volcanic features and deposits, and evidence is widespread for volcanism within the mountains and in terrain immediately outward of the mountain belt units. While two hypotheses for magmatism can be distinguished on the basis of the chemistry of the melts, chemical data are presently lacking for the Ishtar region. The competing hypotheses for magmatism in Western Ishtar Terra can also be tested with thermal models, given a kinematic or dynamic model for the evolution of the region. The crustal remelting hypothesis is assessed, using the kinematic scenario of Head for the evolution of Freyja Montes. In that scenario, Freyja Montes formed by a sequence of large scale underthrusts of the lithosphere of the North Polar Plains beneath Ishtar Terra, with successive blocks of underthrust crust sutured in imbricate fashion onto the thickened crust of Lakshmi Planum and the mantle portion of underthrusting lithosphere episodically detached. The numerical experiments thus show that volcanic activity associated with the formation of the Frejya Montes deformation zone can be explained by crustal melting, due either to direct contact of crustal material with the hot asthenosphere or to heat generation in a thickened crustal layer.

Geochemistry and field geology of shoshonitic magmas in the Late Cretaceous foreland fold and thrust belt of southwestern Montana: Results from the North Doherty Mountain Intrusive Complex

NASA Astrophysics Data System (ADS)

Beranek, L. P.; Burton, B. R.; Ihinger, P. D.

2002-12-01

The North Doherty Mountain Intrusive Complex (NDMIC) is one of several satellite plutons related to the areally extensive Boulder batholith of southwestern Montana. The Boulder batholith comprises multiple plutons and intrusive phases, and the magmatism has long been thought to be the result of subduction due to its calc-alkaline granodioritic composition. The batholith is situated in the Helena salient, which differs from other parts of the North American Cordilleran foreland because there, magmatism spatially and temporally overlaps with deformation in the foreland fold and thrust belt. The North Doherty Mountain Intrusive Complex (NDMIC) is one of several satellite plutons related to the Boulder batholith and represents an ideal microcosm of the batholith for petrogenetic and structural studies because it exposes both mafic and felsic units and was emplaced in the limb of a major thrust related fold. We present new geologic mapping and detailed trace element geochemical analyses to show that the entire mafic-to-felsic suite of rocks in the NDMIC are cogenetic and shoshonitic in character. Shoshonites are unusual magmas that are distinguished by their high concentrations of K, Rb, Sr, Ba, Zr, and Th contents, and are thought to represent partial melting at great depths within the mantle wedge above a subducting slab. The presence of shoshonitic magma in the Cordilleran foreland fold and thrust belt provides important clues into the nature of the formation of this unusual magma type and can provide insights into our understanding of magmatism in foreland structural settings.

Metalliferous deposits of the greater Helena mining region, Montana

USGS Publications Warehouse

Pardee, Joseph Thomas; Schrader, F.C.

1933-01-01

The ore deposits described in this bulletin are distributed through a region of about 3,000 square miles surrounding the city of Helena, Mont. In general the surface of this region is mountainous, but it includes several large intermontane valleys. Large areas in the northern and eastern parts of the region sire underlain by sedimentary rocks of the Algonkian Belt series, and on the northeast and southwest the Belt rocks are overlain without any noticeable angular unconformity by Paleozoic and Mesozoic beds. Oligocene, Miocene, and possibly Pliocene sediments, composed chiefly of volcanic ash and land waste of local origin, occupy large areas in the intermontane valleys and lie unconformably upon Cretaceous and older rocks. A thin veneer of Pleistocene and Recent alluvium generally overspreads the Tertiary. In the extreme northern part of the region are large deposits of glacial drift that represent two stages of the Pleistocene. The principal igneous body of the region is the northern part of the early Tertiary or late Cretaceous Boulder batholitb of quartz monzonite. The main exposure of this body occupies an area of nearly 1,200 square miles and extends southward beyond the limits of the particular region considered. Smaller areas of similar rocks are clustered around this exposure. Most of the exposures probably represent bodies that are connected in depth to form a single mass. The late Cretaceous and older sedimentary rocks are involved in a series of northwestward-trending folds. Along the east side of the region overthrust faults related to the great Lewis overthrust of Glacier National Park cause Belt rocks to overlie rocks of Paleozoic and Mesozoic ages. Large normal faults occur near Marysville and faults of moderate displacement near Helena. The Tertiary beds are slightly deformed by folds and faults that are unrelated to the structure of the older rock. The geologic history of the region includes two contrasting periods, the earlier of which was characterized by the accumulation of marine sediments and the later by mountain building and erosion. The later period began with folding and elevation in late Cretaceous or early Eocene time, followed by overthrust faulting and the intrusion of the Boulder batholith. Next, there ensued a period of crustal stability, during which erosion reduced the region to a surface of low relief and cut away at least 10,000 feet of strata in the area north of Helena. In Oligocene, Miocene, and Pliocene (?) time sediments composed of land waste and volcanic ash were deposited, and this event was followed by warping and faulting that elevated the present mountains. During Pliocene and Pleistocene time the mountains were maturely dissected, and in middle and late Pleistocene time local glaciers formed in the higher mountains and large valley glaciers invaded the extreme northern part of the region. The ore deposits include lodes and placers that have yielded gold, silver, lead, copper, and zinc to a value of at least $176,860,000. The placers were formed mostly during interglacial stages of the Pleistocene. They have been almost entirely exhausted. Most of the lodes are classified as regards age in two groups, an older and a younger. The older lodes are related in origin to the Boulder batholith or some of the neighboring intrusive granitic bodies and were probably formed during early Eocene time. The younger lodes were formed after dacite of probable Miocene age was erupted. They are possibly related in origin to some unexposed intrusive granitic rock. For convenience in description the region is divided into three parts districts north of Helena, districts in the Belt Mountains, and districts south of Helena. The districts north of Helena include a 50-mile stretch of the Continental Divide that forms a broad ridge surmounted with considerable areas of flat or gently sloping surface at a general altitude of 7,000 feet. Narrow valleys 1,000 to 2,000 feet deep are cut into this surface and lead out to the neighboring wide intermontane valleys. The area is underlain mostly by shale, sandstone, and limestone of the upper part of the Belt series. Beds of Paleozoic and Mesozoic age occur south of the Belt area and extend from Helena west and northwest. The igneous rocks of the area include diorite and gabbro sills and dikes of probable Cretaceous age, extrusive andesite that is probably Oligocene or Miocene, and stocks of quartz monzonite, granodiorite, and quartz diorite, probably of Oligocene or Miocene age. The ore deposits of the northern districts are chiefly lodes that are valuable for gold and silver but contain some lead and copper. In the Ophir district bodies of gold and silver ore occur mainly in limestone near a body of quartz monzonite. In the Scratchgravel Hills and Grass Valley districts veins of gold quartz and veins containing lead-silver ore occur in quartz monzonite and in the adjoining metamorphic rocks. In the Austin district lodes containing gold; silver, lead, and copper are found in limestone near intrusive quartz monzonite. An unusual mineral in one of these lodes is corkite, a hydrous sulphate of lead containing arsenic. A small stock of quartz diorite in the Marysville district has invaded and domed Belt rocks. Marginal and radial fractures formed during the cooling and contraction of the igneous body became the receptacles of gold and silver veins, one of which, the Drumlummon, has produced $16,000,000. The veins filled open fractures and are characterized by a gangue of platy calcite and quartz. Lodes in Towsley Gulch in the western part of the district contain lead in addition to gold. In the Gould district a small stock of the granodiorite has invaded the Belt rocks and caused the deposition of veins similar to those near Marysville. In the Heddleston district lodes valuable for gold, silver, lead, and copper occur in Belt sedimentary rocks and diorite, some of them associated with porphyry dikes. In the Wolf Creek district veins in Belt rocks have produced copper ore composed mainly of chalcopyrite or chalcopyrite and tennantite accompanied by pyrite and a gangue of quartz and barite. Placer deposits along the western slope of the Belt Mountains have produced $17,500,000 in gold. Sapphires were formerly obtained from some of these deposits. The central part of the Belt Mountains is a plateaulike area considered to be the remnant of a surface produced by erosion during Tertiary time. This surface was elevated and has been deeply trenched by narrow, transverse valleys that are bordered with remnants of low terraces in which most of the placer deposits occur. Most of the western slope of the mountains is underlain by sedimentary rocks of the Belt series. At the foot of the mountains these give place to Paleozoic rocks, and these in turn are overlain unconformably in Townsend Valley by Tertiary and later deposits. The main structural feature is a great arch called the York anticline, which occupies most of the west side of the mountains. At the west foot of the mountains this fold is bordered by a series of small synclines that are tightly squeezed, faulted, and overturned as a result of pressure exerted from the west or southwest along a fracture described as the El Dorado overthrust On another fracture called1 the Scout Camp overthrust the Belt rocks composing the western slope of the mountains are thrust eastward over Paleozoic beds. Both faults are regarded as branches of the Lewis overthrust of Glacier Park. Igneous rocks that probably range in age from early Eocene to Pleistocene are widely but sparingly distributed.' They include sills and dikes of quartz dibrite, porphyry dikes, small stocks of quartz monzonite and quartz diorite, and surface flows of andesite and basalt. The deposits in the Belt Mountains that are of most interest at the present time are lodes that are chiefly valuable for gold. Most of them are found in the vicinity of York and Confederate Gulch. Nearly all are small quartz veins formed along fractures in diorite dikes and stocks or on bedding planes in the adjoining Belt sedimentary rocks. An exception is the Golden Messenger, a replacement deposit of large size but low grade, formed along fractures in a quartz diorite dike. Other veins in the same dike belong to the rather uncommon class called ladder veins. Many of the small veins contain shoots and bunches of rich ore in their upper parts. Downward- enrichment in gold is indicated to have occurred in some of the veins near York that lie below an old erosion surface. Elsewhere the origin of the placer deposits from erosion o'f the lodes during interglacial stages of the Pleistocene is indicated. Lodes containing chalcopyrite occupy tension fractures in the Belt shales that were produced by lateral movements of the mass composing the mountain front. In the districts south of Helena mining began with the discovery, on July 14, 1864, of rich placer deposits at the present site of the city of Helena, on Last Chance Creek. Since then the placer and lode deposits of these districts have produced metals worth $130,000,000 or more, of which about one-third was gold, the remainder chiefly lead and zinc. Sedimentary rocks ranging in age from Algonkian to Cretaceous underlie parts of the region, and other parts are underlain by a bedded series of andesite and latite tuffs, breccias, and flows. These rocks have been intruded and severely metamorphosed by the quartz monzonite of the Boulder batholith, the exposures of which occupy a large area. Rocks later than the intrusion of the batholith are chiefly a series of late Tertiary dacites and rhyolites. The placers of the southern districts have been almost entirely worked out. The lodes have yielded metals worth $111,600,000, but many of them are still productive. They include veins and contact-metamorphic deposits. Some of the contact deposits contain copper ore, and others contain iron ore valuable for fluxing. The veins are of two ages. The older veins have yielded most of the metallic production of the region. Their ores in general are heavy sulphide aggregates composed mainly of galena, sphalerite, and pyrite. Arsenopyrite is generally present; tetrahedrite and chalcopyrite are less common. Many of the veins are distinguished from the usual type of ore body by the occurrence of abundant tourmaline. The, metals produced are chiefly silver, lead, gold, and zinc, with some copper. The younger veins are essentially precious-metal deposits. They are mainly fissure veins but include some disseminated deposits of low grade. They are widely distributed and include several productive bodies. A distinguishing feature is the occurrence in the gangue of cryptocrystalline quartz and lamellar calcite. A dominant eastward trend of the vein fractures of the older group indicates them to be tension cracks in the crust block lying west of the Lewis overthrust that were produced by stretching in a direction at right angles to the thrust.

Cape Province, South Africa as seen from STS-58

NASA Image and Video Library

1993-10-30

STS058-77-083 (18 Oct-1 Nov 1993) --- In this scene of the south coast of Africa, Cape Agulhas, the southernmost point on the continent, appears as the leftmost cape. Viewed with the Earth's limb top left, clouds at bottom, the view direction is west and north top right. The Cape of Good Hope, with Cape Town nearby, is the thin spike beyond. The great bay in the foreground is Algoa Bay with the city of Port Elizabeth. This was the first time European voyagers are known to have rounded the Cape of Good Hope in their quest to reach India by sea. The entire fold mountain belt of southern Africa is visible: these mountains appear as green (forested) wavy structures stretching west form the foreground, to the Cape of Good Hope, and then northwards some distance. One theory about their origin is that the Falkland Plateau, now an undersea extension of South America, was jostled up against Africa more than 150 million years ago, in times before the Atlantic Ocean existed, before Africa and South America drifted apart from one another. The jostling caused the evolution of the fold mountain belt.

The "normal" elongation of river basins

NASA Astrophysics Data System (ADS)

Castelltort, Sebastien

2013-04-01

The spacing between major transverse rivers at the front of Earth's linear mountain belts consistently scales with about half of the mountain half-width [1], despite strong differences in climate and rock uplift rates. Like other empirical measures describing drainage network geometry this result seems to indicate that the form of river basins, among other properties of landscapes, is invariant. Paradoxically, in many current landscape evolution models, the patterns of drainage network organization, as seen for example in drainage density and channel spacing, seem to depend on both climate [2-4] and tectonics [5]. Hovius' observation [1] is one of several unexplained "laws" in geomorphology that still sheds mystery on how water, and rivers in particular, shape the Earth's landscapes. This narrow range of drainage network shapes found in the Earth's orogens is classicaly regarded as an optimal catchment geometry that embodies a "most probable state" in the uplift-erosion system of a linear mountain belt. River basins currently having an aspect away from this geometry are usually considered unstable and expected to re-equilibrate over geological time-scales. Here I show that the Length/Width~2 aspect ratio of drainage basins in linear mountain belts is the natural expectation of sampling a uniform or normal distribution of basin shapes, and bears no information on the geomorphic processes responsible for landscape development. This finding also applies to Hack's [6] law of river basins areas and lengths, a close parent of Hovius' law. [1]Hovius, N. Basin Res. 8, 29-44 (1996) [2]Simpson, G. & Schlunegger, F. J. Geophys. Res. 108, 2300 (2003) [3]Tucker, G. & Bras, R. Water Resour. Res. 34, 2751-2764 (1998) [4]Tucker, G. & Slingerland, R. Water Resour. Res. 33, 2031-2047 (1997) [5]Tucker, G. E. & Whipple, K. X. J. Geophys. Res. 107, 1-1 (2002) [6]Hack, J. US Geol. Surv. Prof. Pap. 294-B (1957)

Deep crustal structure of the UAE-Oman mountain belt from seismic and gravity data

NASA Astrophysics Data System (ADS)

Pilia, S.; Tanveer, M.; Ali, M.; Watts, A. B.; Searle, M. P.; Keats, B. S.

2016-12-01

The UAE-Oman mountains constitute a 700 km long, 50 km wide compressional orogenic belt that developed during the Cenozoic on an underlying extensional Tethyan rifted margin. It contains the world's largest and best-exposed thrust sheet of oceanic crust and upper mantle (Semail Ophiolite), which was obducted onto the Arabian rifted continental margin during the Late Cretaceous. Although the shallow structure of the UAE-Oman mountain belt is reasonably well known through the exploitation of a diverse range of techniques, information on deeper structure remains little. Moreover, the mechanisms by which dense oceanic crustal and mantle rocks are emplaced onto less dense and more buoyant continental crust are still controversial and remain poorly understood. The focus here is on an active-source seismic and gravity E-W transect extending from the UAE-mountain belt to the offshore. Seismic refraction data were acquired using the survey ship M/V Hawk Explorer, which was equipped with a large-volume airgun array (116 liters). About 400 air gun shots at 50-second time interval were recorded on land by eight broadband seismometers. In addition, reflection data were acquired at 20 seconds interval and recorded by a 5-km-long multichannel streamer. Results presented here include an approximately 85 km long (stretching about 35 km onshore and 50 km offshore) P-wave velocity crustal profile derived by a combination of forward modelling and inversion of both diving and reflected wave traveltimes using RAYINVR software. We employ a new robust algorithm based on a Monte Carlo approach (VMONTECARLO) to address the velocity model uncertainties. We find ophiolite seismic velocities of about 5.5 km/s, underlain by a thin layer of slower material (about 4.5 km/s). Furthermore, the velocity model reveals a Moho depth that rises from ca 30 km in the west to ca 20 km in the east. A poststack depth-migrated profile (about 50 km long) coincident with the offshore part of the refraction profile shows a thick sequence (up to 6 km) of seaward dipping sediments that are offset by a number of listric (normal) faults, some of which intersect the seabed and so reflect recent tectonic activity. The trend of the Bouguer anomaly provides further constraints on the deeper structure of the margin and appears to confirm the presence of a stretched crust.

An exhumed Late Paleozoic canyon in the rocky mountains

USGS Publications Warehouse

Soreghan, G.S.; Sweet, D.E.; Marra, K.R.; Eble, C.F.; Soreghan, M.J.; Elmore, R.D.; Kaplan, S.A.; Blum, M.D.

2007-01-01

Landscapes are thought to be youthful, particularly those of active orogenic belts. Unaweep Canyon in the Colorado Rocky Mountains, a large gorge drained by two opposite-flowing creeks, is an exception. Its origin has long been enigmatic, but new data indicate that it is an exhumed late Paleozoic landform. Its survival within a region of profound late Paleozoic orogenesis demands a reassessment of tectonic models for the Ancestral Rocky Mountains, and its form and genesis have significant implications for understanding late Paleozoic equatorial climate. This discovery highlights the utility of paleogeomorphology as a tectonic and climatic indicator. ?? 2007 by The University of Chicago. All rights reserved.

Geology of Glacier National Park and the Flathead Region, Northwestern Montana

USGS Publications Warehouse

Ross, Clyde P.

1959-01-01

This report summarizes available data on two adjacent and partly overlapping regions in northwestern Montana. The first of these is Glacier National Park plus small areas east and west of the park. The second is here called, for convenience, the Flathead region; it embraces the mountains from the southern tip of Glacier Park to latitude 48 deg north and between the Great Plains on the east and Flathead Valley on the west. The fieldwork under the direction of the writer was done in 1948, 1949, 1950, and 1951, with some work in 1952 and 1953. The two regions together include parts of the Swan, Flathead, Livingstone, and Lewis Ranges. They are drained largely by branches of the Flathead River. On the east and north, however, they are penetrated by tributaries of the Missouri River and in addition by streams that flow into Canada. Roads and highways reach the borders of the regions; but there are few roads in the regions and only two highways cross them. The principal economic value of the assemblage of mountains described in the present report is as a collecting ground for snow to furnish the water used in the surrounding lowlands and as a scenic and wildlife recreation area. A few metallic deposits and lignitic coal beds are known, but these have not proved to be important and cannot, as far as can now be judged, be expected to become so. No oil except minor seeps has yet been found, and most parts of the two regions covered do not appear geologically favorable to the presence of oil in commercial quantities. The high, Hungry Horse Dam on which construction was in progress during the fieldwork now floods part of the Flathead region and will greatly influence the future of that region. The rocks range in age from Precambrian to Recent. The thickest units belong to the Belt series of Precambrian age, and special attention was paid to them. As a result, it is clear that at least the upper part of the series shows marked lateral changes within short distances. This fact introduces complexities into stratigraphic correlation and should be remembered wherever the series is studied. The stromatolites, or fossil algae, in the Belt series, although still imperfectly understood, give clues with respect to problems of ecology and stratigraphy. The subdivisions of the Belt series within the areas covered by the present report are, in ascending order, Altyn limestone, Appekunny argillite, Grinnell argillite, Siyeh limestone, and Missoula group. Local subdivisions of the Missoula group are possible in certain areas, and all the units just named are expected to be subdivided when detailed studies are undertaken. In the Glacier National Park and Flathead regions together, it is probable that between 25,000 and 30,000 feet of beds belonging to the Belt series, possibly more, are present. These consist largely of quartzitic argillite, quartzite, and carbonate rocks, mostly dolomitic. Small gabbroic and diabasic intrusive bodies and, at one horizon, basaltic lava are associated with the Belt series. Above the Belt series is a thick sequence of Cambrian, Devonian, and Carboniferous strata, in which limestone is dominant, followed by strata of Jurassic and Cretaceous age, largely limestone and shale and partly of terrestrial origin. Slightly consolidated gravel, sand, and silt of Tertiary age are preserved in some valleys and as erosional remnants on the plains close to the mountain border. Pleistocene and Recent glacial and fluviatile deposits are plentiful in mountain valleys and on the plains east of the mountains. Sufficient crustal movements took place during the latter part of Belt time to produce tension cracks that permitted some intrusion and related extrusion to occur. Broad crustal warping probably took place at intervals during the Paleozoic era, but these successive movements left little record other than the absence of sedimentary rock units that might otherwise have been deposited. The same can be said of much of the Me

Cenozoic volcanic centers in the New Mexico segment of the Pedregosa Basin: constraints on oil and gas exploration in southwestern New Mexico. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elston, W.E.

1983-01-01

Located in the southwestern corner of New Mexico, southern Hidalgo County occupies a segment of the Pedregosa sedimentary basin and is crossed by a belt of Laramide thrust faults. These factors favor accumulations of oil and gas. The present investigation has documented a constraint on probable oil and gas accumulations, the occurrence of major mid-Tertiary Valles-type ash-flow cauldrons and indications of underlying plutons. Indications of cauldrons have been found in the following ranges: in the southern Pyramid Mountains (Muir cauldron), south-central Peloncillo Mountains (Rodeo cauldron), Gaudalupe Mountains (Geronimo Trail cauldron), Sierra San Luis (San Luis cauldron), Southern Animas Mountains (Tullous,more » Animas Peak, Cowboy Rim cauldrons), Central Animas Mountains (Juniper cauldron), and Apache Hills (Apache cauldron). No indications of cauldrons or other major volcanic centers have been found in the southeastern corner of Hidalgo County, including the southern Sierra Rica, Big Hatchet Mountains, Alamo Hueco Mountains, and Dog Mountains. These cauldron-free areas offer the most favorable prospects for petroleum exploration.« less

41. VIEW NORTH OF UPPER LEVEL OF CRUSHER ADDITION. DINGS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

41. VIEW NORTH OF UPPER LEVEL OF CRUSHER ADDITION. DINGS MAGNETIC PULLEY AT CENTER. ALSO SHOWS 100-TON CRUSHED UNOXIDIZED ORE BIN (RIGHT), PULLEY FORM 18 INCH BELT CONVEYOR CRUSHED OXIDIZED ORE BIN FEED AND STEPHENSADAMSON 25 TON/HR BUCKET ELEVATOR (UPPER CENTER). THE UPPER PORTION OF THE SAMPLING ELEVATOR IS ABOVE THE MAGNETIC PULLEY (CENTER LEFT) WITH THE ROUTE OF THE 16 INCH BELT CONVEYOR FINES FEED TO CRUSHED OXIDIZED ORE BIN TO ITS LEFT. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Temporally and spatially uniform rates of erosion in the southern Appalachian Great Smoky Mountains

USGS Publications Warehouse

Matmon, A.; Bierman, P.R.; Larsen, J.; Southworth, S.; Pavich, M.; Caffee, M.

2003-01-01

We measured 10Be in fluvial sediment samples (n = 27) from eight Great Smoky Mountain drainages (1-330 km2). Results suggest spatially homogeneous sediment generation (on the 104-105 yr time scale and > 100 km2 spatial scale) at 73 ?? 11 t km-2 yr-1, equivalent to 27 ?? 4 m/m.y. of bedrock erosion. This rate is consistent with rates derived from fission-track, long-term sediment budget, and sediment yield data, all of which indicate that the Great Smoky Mountains and the southern Appalachians eroded during the Mesozoic and Cenozoic at ???30 m/m.y. In contrast, unroofing rates during the Paleozoic orogenic events that formed the Appalachian Mountains were higher (???102 m/m.y.). Erosion rates decreased after termination of tectonically driven uplift, enabling the survival of this ancient mountain belt with its deep crustal root as an isostatically maintained feature in the contemporary landscape.

Modelling of lateral fold growth and fold linkage: Applications to fold-and-thrust belt tectonics

NASA Astrophysics Data System (ADS)

Grasemann, Bernhard; Schmalholz, Stefan

2013-04-01

We use a finite element model to investigate the three-dimensional fold growth and interference of two initially isolated fold segments. The most critical parameter, which controls the fold linkage mode, is the phase difference between the laterally growing fold hinge lines: 1) "Linear-linkage" yields a sub-cylindrical fold with a saddle at the location where the two initial folds linked. 2) "Oblique-linkage" produces a curved fold resembling a Type II refold structure. 3) "Oblique-no-linkage" results in two curved folds with fold axes plunging in opposite directions. 4) "Linear-no-linkage" yields a fold train of two separate sub-cylindrical folds with fold axes plunging in opposite directions. The transition from linkage to no-linkage occurs when the fold separation between the initially isolated folds is slightly larger than one half of the low-amplitude fold wavelength. The model results compare well with previously published plasticine analogue models and can be directly applied to the investigation of fold growth history in fold-and-thust belts. An excellent natural example of lateral fold linkage is described from the Zagros fold-and-thrust belt in the Kurdistan Region of Iraq. The fold growth in this region is not controlled by major thrust faults but the shortening of the Paleozoic to Cenozoic passive margin sediments of the Arabian plate occurred mainly by detachment folding. The sub-cylindrical anticlines with hinge-parallel lengths of more than 50 km have not developed from single sub-cylindrical embryonic folds but they have merged from different fold segments that joined laterally during fold amplification and lateral fold growth. Linkage points are marked by geomorphological saddle points which are structurally the lowermost points of antiforms and points of principal curvatures with opposite sign. Linkage points can significantly influence the migration of mineral-rich fluids and hydrocarbons and are therefore of great economic importance.

Oak Ridge fault, Ventura fold belt, and the Sisar decollement, Ventura basin, California

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeats, R.S.; Huftile, G.J.; Grigsby, F.B.

1988-12-01

The rootless Ventura Avenue, San Miguelito, and Rincon anticlines (Ventura fold belt) in Pliocene -Pleistocene turbidites are fault-propagation folds related to south-dipping reverse faults rising from a decollement in Miocene shale. To the east, the Sulfur Mountain anticlinorium overlies and is cut by the Sisar, Big Canyon, and Lion south-dipping thrusts that merge downward into the Sisar decollement in lower Miocene shale. Shortening of the Miocene and younger sequence is {approximately} 3 km greater than that of underlying competent Paleogens strata in the Ventura fold belt and {approximately} 7 km greater farther east at Sulfur Mountain. Cross-section balancing requires thatmore » this difference be taken up by the Paleogene sequence at the Oak Ridge fault to the south. Convergence is northeast to north-northeast on the base of earthquake focal mechanisms, borehole breakouts, and piercing-point offest of the South Mountain seaknoll by the Oak Ridge fault. A northeast-trending line connecting the west end of Oak Ridge and the east end of Sisar fault separates an eastern domain where late Quaternary displacement is taken up entirely on the Oak Ridge fault and a western domain where displacement is transferred to the Sisar decollement and its overlying rootless folds. This implies that (1) the Oak Ridge fault near the coast presents as much seismic risk as it does farther east, despite negligible near-surface late Quaternary movement; (2) ground-rupture hazard is high for the Sisar fault set in the upper Ojai Valley; and (3) the decollement itself could produce an earthquake analogous to the 1987 Whittier Narrows event in Low Angeles.« less

Strong feedbacks between hillslope sediment production and channel incision by saltation-abrasion

NASA Astrophysics Data System (ADS)

Lundbek Egholm, David; Faurschou Knudsen, Mads; Sandiford, Mike

2013-04-01

While it is well understood that rivers erode mountain ranges by incising the bedrock and by transporting sediments away from the ranges, the basic physical mechanisms that drive long-term bedrock erosion and control the lifespan of mountain ranges remain uncertain. A particularly challenging paradox is reconciling the dichotomy associated with the high incision rates observed in active mountain belts, and the long-term (108 years) preservation of significant topographic reliefs in inactive orogenic belts (e.g. von Blankenburg, 2005). We have performed three-dimensional computational experiments with a landscape evolution model that couples bedrock landslides and sediment flux-dependent river erosion by saltation-abrasion (Sklar & Dietrich, 2004). The coupled model experiments show strong feedbacks between the channel erosion and the hillslope delivery of sediments. The feedbacks point to hillslope sediment production rate as the main control on channel erosion rates where saltation-abrasion dominates over other fluvial erosion processes. Our models results thus highlight the importance of hillslope sediment production controlled by climate and tectonic activity for scaling erosion rates in fluvial systems. Because of variations in landslide frequency, the feedbacks make tectonic activity a primary driver of fluvial erosion and help clarifying the long-standing paradox associated with the persistence of significant relief in old orogenic belts, up to several hundred-million-years after tectonic activity has effectively ceased. References F. von Blankenburg. The control mechanisms of erosion and weathering at basin scale from cosmogenic nuclides in river sediment. Earth Planet. Sci. Lett. 237, 462-479 (2005). L. S. Sklar, W. E. Dietrich. A mechanistic model for river incision into bedrock by saltating bed load. Water Resour. Res. 40, W06301 (2004).

Middle to late cenozoic geology, hydrography, and fish evolution in the American Southwest

USGS Publications Warehouse

Spencer, J.E.; Smith, G.R.; Dowling, T.E.

2008-01-01

An evaluation of the poorly understood Cenozoic hydrologic history of the American Southwest using combined geological and biological data yields new insights with implications for tectonic evolution. The Mesozoic Cordilleran orogen next to the continental margin of southwestern North America probably formed the continental divide. Mountain building migrated eastward to cause uplift of the Rocky Mountains during the Late Cretaceous to early Tertiary Laramide orogeny. Closed drainage basins that developed between the two mountain belts trapped lake waters containing fish of Atlantic affinity. Oligocene-Miocene tectonic extension fragmented the western mountain belt and created abundant closed basins that gradually filled with sediments and became conduits for dispersal of fishes of both Pacific and Atlantic affinity. Abrupt arrival of the modern Colorado River to the Mojave-Sonora Desert region at ca. 5 Ma provided a new conduit for fish dispersal. Great dissimilarities in modern fish fauna, including differences in their mitochondrial deoxyribonucleic acid (DNA), indicate that late Miocene runoff from the Colorado Plateau did not flow down the Platte or Rio Grande, or through the Lake Bonneville Basin. Fossil fishes from the upper Miocene part of the Bidahochi Formation on the Colorado Plateau have characteristics that reflect a habitat of large, swift-moving waters, and they are closely related to fossil fishes associated with the Snake and Sacramento Rivers. This evidence suggests that influx of fishes from the ancestral Snake River involved a major drainage, not merely small headwater transfers. ?? 2008 The Geological Society of America.

High variability of dung beetle diversity patterns at four mountains of the Trans-Mexican Volcanic Belt

PubMed Central

Arriaga-Jiménez, Alfonsina; Halffter, Gonzalo

2018-01-01

Insect diversity patterns of high mountain ecosystems remain poorly studied in the tropics. Sampling dung beetles of the subfamilies Aphodiinae, Scarabaeinae, and Geotrupinae was carried out at four volcanoes in the Trans-Mexican Volcanic Belt (TMVB) in the Mexican transition zone at 2,700 and 3,400 MASL, and on the windward and leeward sides. Sampling units represented a forest–shrubland–pasture (FSP) mosaic typical of this mountain region. A total of 3,430 individuals of 29 dung beetle species were collected. Diversity, abundance and compositional similarity (CS) displayed a high variability at all scales; elevation, cardinal direction, or FSP mosaics did not show any patterns of higher or lower values of those measures. The four mountains were different regarding dispersion patterns and taxonomic groups, both for species and individuals. Onthophagus chevrolati dominated all four mountains with an overall relative abundance of 63%. CS was not related to distance among mountains, but when O. chevrolati was excluded from the analysis, CS values based on species abundance decreased with increasing distance. Speciation, dispersion, and environmental instability are suggested as the main drivers of high mountain diversity patterns, acting together at different spatial and temporal scales. Three species new to science were collected (>10% of all species sampled). These discoveries may indicate that speciation rate is high among these volcanoes—a hypothesis that is also supported by the elevated number of collected species with a restricted montane distribution. Dispersion is an important factor in driving species composition, although naturally limited between high mountains; horizontal colonization events at different time scales may best explain the observed species composition in the TMVB, complemented by vertical colonization events to a lesser extent. Environmental instability may be the main factor causing the high variability of diversity and abundance patterns found during sampling. Together, we interpret these results as indicating that species richness and composition in the high mountains of the TMVB may be driven by biogeographical history while variability in diversity is determined by ecological factors. We argue that current conservation strategies do not focus sufficiently on protecting high mountain fauna, and that there is a need for developing and applying new conservation concepts that take into account the high spatial and temporal variability of this system. PMID:29507842

Deep burial dolomitization driven by plate collision: Evidence from strontium-isotopes of Jurassic Arab IV dolomites from offshore Qatar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vahrenkamp, V.C.; Taylor, S.R.

The use of strontium-isotope ratios of dolomites to constrain timing and mechanism of diagenesis has been investigated on Jurassic Arab IV dolomites from offshore Qatar. Reservoir quality is determined by two types of dolomites, which were differentiated geochemically (cathodoluminescence, fluid inclusions, and carbon and oxygen stable isotopes): (1) stratigraphically concordant sucrosic dolomites with high porosity formed during early near-surface diagenesis (Jurassic) and (2) stratigraphically discordant cylindrical bodies of massive, porosity-destroying dolomites formed late during deep burial diagenesis (Eocene-Pliocene). Detailed Sr-isotope analysis of dolomites from the Arab IV confirms an Early Jurassic age of the sucrosic, high porosity dolomites ({sup 87}Sr/{supmore » 86}SR = 0.70707 for NBS 987 = 0.71024) with magnesium and strontium being derived from Jurassic seawater. Late Tertiary compressional orogeny of the Zagros belt to the north is proposed to have caused large-scale squeezing of fluids from the pore system of sedimentary rocks. A regional deep fluid flow system developed dissolving infra-Cambrian evaporites upflow and causing large-scale deep burial dolomitization downflow.« less

[Altitude-belt zonality of wood vegetation within mountainous regions of the Sayan Mountains: a model of ecological second-order phase transitions ].

PubMed

Sukhovol'skiĭ, V G; Ovchinnikova, T M; Baboĭ, S D

2014-01-01

As a description of altitude-belt zonality of wood vegetation, a model of ecological second-order transitions is proposed. Objects of the study have been chosen to be forest cenoses of the northern slope of Kulumyss Ridge (the Sayan Mauntains), while the results are comprised by the altitude profiles of wood vegetation. An ecological phase transition can be considered as the transition of cenoses at different altitudes from the state of presence of certain tree species within the studied territory to the state of their absence. By analogy with the physical model of second-order, phase transitions the order parameter is introduced (i.e., the area portion occupied by a single tree species at the certain altitude) as well as the control variable (i.e., the altitude of the wood vegetation belt). As the formal relation between them, an analog of the Landau's equation for phase transitions in physical systems is obtained. It is shown that the model is in a good accordance with the empirical data. Thus, the model can be used for estimation of upper and lower boundaries of altitude belts for individual tree species (like birch, aspen, Siberian fir, Siberian pine) as well as the breadth of their ecological niches with regard to altitude. The model includes also the parameters that describe numerically the interactions between different species of wood vegetation. The approach versatility allows to simplify description and modeling of wood vegetation altitude zonality, and enables assessment of vegetation cenoses response to climatic changes.

Barberton greenstone belt volcanism: Succession, style and petrogenesis

NASA Technical Reports Server (NTRS)

Byerly, G. R.; Lowe, D. R.

1986-01-01

The Barberton Mountain Land is an early Archean greenstone belt along the eastern margin of the Kaapvaal Craton of southern Africa. Detailed mapping in the southern portion of the belt leads to the conclusion that a substantial thickness is due to original deposition of volcanics and sediments. In the area mapped, a minimum thickness of 12km of predominantly mafic and ultramafic volcanics comprise the Komati, Hooggenoeg, and Kromberg Formations of the Onverwacht Group, and at least one km of predominantly pyroclastic and epiclastic sediments derived from dacitic volcanics comprise the Fig Tree Group. The Barberton greenstone belt formed primarily by ultramafic to mafic volcanism on a shallow marine platform which underwent little or no concurrent extension. Vents for this igneous activity were probably of the non-constructional fissure type. Dacitic volcanism occurred throughout the sequence in minor amounts. Large, constructional vent complexes were formed, and explosive eruptions widely dispersed pyroclastic debris. Only in the final stages of evolution of the belt did significant thrust-faulting occur, generally after, though perhaps overlapping with, the final stage of dacitic igneous activity. A discussion follows.

MULTIVARIATE ANALYSIS OF MACROINVERTEBRATE ASSEMBLAGES TO DETERMINE IMPACTS ON ROCKY MOUNTAIN STREAM ECOSYSTEMS

EPA Science Inventory

Using reduncancy (RDA) and canonical correlation analysis (CCA) we assessed relationships between chemical and physical characteristics and periphyton at 105 stream sites sampled by REMAP in the mineral belt of the southern Rockies ecoregion in Colorado. We contrasted results ob...

Fault dating in the Canadian Rocky Mountains: Evidence for late Cretaceous and early Eocene orogenic pulses

USGS Publications Warehouse

van der Pluijm, B.A.; Vrolijk, P.J.; Pevear, D.R.; Hall, C.M.; Solum, J.

2006-01-01

Fault rocks from the classic Rocky Mountain foreland fold-and-thrust belt in south-western Canada were dated by Ar analysis of clay grain-size fractions. Using X-ray diffraction quantification of the detrital and authigenic component of each fraction, these determinations give ages for individual faults in the area (illite age analysis). The resulting ages cluster around 72 and 52 Ma (here called the Rundle and McConnell pulses, respectively), challenging the traditional view of gradual forward progression of faulting and thrust-belt history of the area. The recognition of spatially and temporally restricted deformation episodes offers field support for theoretical models of critically stressed wedges, which result in geologically reasonable strain rates for the area. In addition to regional considerations, this study highlights the potential of direct dating of shallow fault rocks for our understanding of upper-crustal kinematics and regional tectonic analysis of ancient orogens. ?? 2006 Geological Society of America.

Dating paleo-seismic faulting in the Taiwan Mountain Belt

NASA Astrophysics Data System (ADS)

Lo, C. H.; Wu, C. Y.; Chu, H. T.; Yui, T. F.

2017-12-01

In-situ 40Ar/39Ar laser microprobe dating was carried out on the Hoping pseudotachylite from a mylonite-fault zone in the metamorphosed basement complex of the active Taiwan Mountain Belt to determine the timing of the responsible earthquake(s). The dating results, distributed between 3.2 to 1.6 Ma with errors ranging 0.2 1.1 Ma, were derived from a combination of two Ar isotopic system end-members with inverse isochron ages of 1.55±0.05 and 2.87±0.07 Ma, respectively. Fault melt was found mixed with ultracataclasis in petrographical observations, therefore the older inverse isochron end-member may be attributed to the relic wall rock Ar isotopic system contained in micro-breccia as published 40Ar/39Ar mylonitization ages from 4.1 to 3.0 Ma. Without significant Ar loss expected, the young 1.6 Ma end-member represents the Ar isotopic system and age of the exact pseudotachylite. Seismic faulting therefore occurred during basement rock exhumation in the Taiwanese hinterland.

Interpretations from multichannel seismic-reflection profiles of the deep crust crossing South Carolina and Georgia from the Appalachian Mountains to the Atlantic Coast

USGS Publications Warehouse

Behrendt, John C.

1985-01-01

The Appalachian décollement does not appear continuous from the Appalachian Mountains to the coast but rather appears to extend southeastward only to the Carolina slate belt. A series of reflections on lines S4, S6, and S8 and on the COCORP line is interpreted as evidence of southeastward-dipping imbricate faults, from the Brevard fault on the northwest to beyond the Augusta fault, which marks the southeastern extent of the Eastern Piedmont fault zone. The Carolina slate belt is characterized on the four seismic profiles by a complex series of diffractions and reflections extending from less than 1 s to 8 s. These arrivals are possibly the result of layering in the metasedimentary rocks complexly disrupted by the imbricate faults. A number of Triassic (?) basins are apparent in the reflection data for the rifted Charleston terrane identified from low-gradient magnetic anomalies.

The tectonics of anorthosite massifs

NASA Technical Reports Server (NTRS)

Seyfert, C. K.

1981-01-01

Anorthosite massifs developed approximately 1.4 to 1.5 billion years ago along an arch which developed parallel to a zone of continental separation as a block which included North America, Europe, and probably Asia separated from a block which included parts of South America, Africa, India, and Australia. Anorthosite massifs also developed at the same time along a belt which runs through the continents which comprise Gondwanaland (South America), Africa, India, Australia, and Antarctica. This was a zone of continental separation which subsequently became a zone of continental collision about 1.2 billion years ago. The northern anorthosite belt also parallels an orogenic belt which was active between 1.8 and 1.7 billion years ago. Heat generated during this mountain building period helped in the formation of the anorthosites.

Evaluation and Management of the Gas and Rock Outburst Hazard in the Light of International Legal Regulations

NASA Astrophysics Data System (ADS)

Skoczylas, Norbert; Wierzbicki, Mirosław

2014-12-01

As part of the present article, the Authors analyzed relevant legal rules that are in force in countries where the gas and coal outburst hazard occurs (Australia, the Czech Republic, China, Germany, Poland, Russia, and Ukraine). Similarities and differences between particular solutions were highlighted. As the subject of the analysis were the original legal standards, the article incorporates the parameter symbols and units adopted in the discussed regulations. W ramach niniejszej pracy poddano analizie obowiązujące rozwiązania prawne z krajów, gdzie występuje zagrożenie wyrzutami gazu i węgla (Australia, Czechy, Chiny, Niemcy, Polska, Rosja, Ukraina). Zwrócono uwagę na podobieństwa i różnice w poszczególnych rozwiązaniach. Ze względu na analizę oryginalnych rozwiązań legislacyjnych w opracowaniu pozostawione zostały stosowane w odpowiednich przepisach oznaczenia parametrów oraz ich jednostki. Istnieje duże podobieństwo w obrębie przepisów w krajach europejskich. Podobieństwo to dotyczy zarówno ogólnej koncepcji przepisów, w których dąży się do maksymalnego sformalizowania nakładanych wymogów, łącznie ze wskazaniem konkretnych parametrów górniczych oraz ich wartości kryterialnych, na bazie których klasyfikowane są pokłady węglowe, bądź ich części, do poszczególnych klas zagrożenia wyrzutowego. Podobne podejście w ustawodawstwie w zakresie bezpieczeństwa w górnictwie reprezentują Chiny. W całkowitej opozycji do przepisów europejskich i chińskich znajdują się przepisy amerykańskie i australijskie. W przepisach tych wyraźnie zaakcentowany jest fakt, iż charakter ryzyka wyrzutowego jest bardzo lokalny, więc trudno go uogólniać nie tylko między kopalniami, ale również w poszczególnych wyrobiskach. Jedno, niezmienne podejście do zarządzania ryzykiem, zgodnie z przepisami australijskimi, jest więc niewłaściwe. Przepisy te nie podają szczegółowego opisu, w jaki sposób prowadzić zarządzanie ryzykiem wyrzutu, ale dają natomiast zarys tego, jakie elementy muszą być uwzględnione w rozwoju zarządzaniu ryzykiem. Kategoryzacja zagrożenia wyrzutowego w krajach europejskich i w Chinach ma wiele cech wspólnych. Ustalane są najczęściej dwie, lub trzy kategorie zagrożenia. Często incydenty wyrzutów, bądź poważnych symptomów mogących świadczyć o zagrożeniu są podstawą do zaliczenia pokładu do najwyższej kategorii zagrożenia. Dominującym parametrem w podstawowej ocenie zagrożenia wyrzutowego jest zawartość metanu w pokładzie węgla. Występuje ona w aktach prawnych wszystkich krajów, które narzucają konkretne sposoby określana stanu zagrożenia, jedynie przepisy chińskie nie obligują do badań zawartości gazu w węglu. W przepisach chińskich pojawia się pomiar ciśnienia gazu.

Antarctic NAT PSC Belt of June 2003: Observational Validation of the Mountain Wave Seeding Hypothesis

NASA Technical Reports Server (NTRS)

Eckermann, S. D.; Hoffmann, L.; Hoepfner, M.; Wu, D. L.; Alexander, M. J.

2009-01-01

Satellite observations of polar stratospheric clouds (PSCs) over Antarctica in June 2003 revealed small nitric acid trihydrate (NAT) particles forming suddenly along the vortex edge. Models suggest the trigger was mountain waves over the Antarctic Peninsula (AP) forming ice for NAT nucleation. We test this hypothesis by analyzing perturbations in stratospheric radiances from the Atmospheric Infrared Sounder (AIRS). AIRS data show mountain waves over the AP on 10-14 June, with no resolved wave activity before or after. Peak wave temperature amplitudes derived from independent 40 hPa channels all return values of 10-12 K, in agreement with values used to model this NAT event. These observations support a NAT wake from a small region of mountain wave activity over the AP as the source of this circumpolar NAT outbreak.

Groundwater resources of the East Mountain area, Bernalillo, Sandoval, Santa Fe, and Torrance Counties, New Mexico, 2005

USGS Publications Warehouse

Bartolino, James R.; Anderholm, Scott K.; Myers, Nathan C.

2010-01-01

The groundwater resources of about 400 square miles of the East Mountain area of Bernalillo, Sandoval, Santa Fe, and Torrance Counties in central New Mexico were evaluated by using groundwater levels and water-quality analyses, and updated geologic mapping. Substantial development in the study area (population increased by 11,000, or 50 percent, from 1990 through 2000) has raised concerns about the effects of growth on water resources. The last comprehensive examination of the water resources of the study area was done in 1980-this study examines a slightly different area and incorporates data collected in the intervening 25 years. The East Mountain area is geologically and hydrologically complex-in addition to the geologic units, such features as the Sandia Mountains, Tijeras and Gutierrez Faults, Tijeras syncline and anticline, and the Estancia Basin affect the movement, availability, and water quality of the groundwater system. The stratigraphic units were separated into eight hydrostratigraphic units, each having distinct hydraulic and chemical properties. Overall, the major hydrostratigraphic units are the Madera-Sandia and Abo-Yeso; however, other units are the primary source of supply in some areas. Despite the eight previously defined hydrostratigraphic units, water-level contours were drawn on the generalized regional potentiometric map assuming all hydrostratigraphic units are connected and function as a single aquifer system. Groundwater originates as infiltration of precipitation in upland areas (Sandia, Manzano, and Manzanita Mountains, and the Ortiz Porphyry Belt) and moves downgradient into the Tijeras Graben, Tijeras Canyon, San Pedro synclinorium, and the Hagan, Estancia, and Espanola Basins. The study area was divided into eight groundwater areas defined on the basis of geologic, hydrologic, and geochemical information-Tijeras Canyon, Cedar Crest, Tijeras Graben, Estancia Basin, San Pedro Creek, Ortiz Porphyry Belt, Hagan Basin, and Upper Sandia Mountains. View report for unabridged abstract.

Experiments on schistosity and slaty cleavage

USGS Publications Warehouse

Becker, George Ferdinand

1904-01-01

Schistosity as a structure is important, and it is a part of the business of geologists to explain its origin. Slaty cleavage has further and greater importance as a possible tectonic feature. Scarcely a great mountain range exists, or has existed, along the course of which belts of slaty rock are not found, the dip of the cleavage usually approaching verticality. Are these slate belts equivalent to minutely distributed step faults of great total throw, or do they indicate compression perpendicular to the cleavage without attendant relative dislocation? Evidently the answer to this question is of first importance in the interpretation of orogenic phenomena.

Gravity anomalies and the structure of western Tibet and the southern Tarim Basin

NASA Technical Reports Server (NTRS)

Lyon-Caen, H.; Molnar, P.

1984-01-01

Gravity anomalies across the western part of the Tarim Basin and the Kunlun mountain belt show that this area is not in local isostatic equilibrium. These data can be explained if a strong plate underlying the Tarim Basin extends southwestward beneath the belt at least 80 km and supports part of the topography of northwest Tibet. This corroborates Norin's inference that late Tertiary crustal shortening has occurred in this area by southward underthrusting of the Tarim Basin beneath the Kunlun. This study places a lower bound on the amount of underthrusting.

Interference of lithospheric folding in Central Asia by simultaneous Indian and Arabian plate indentation

NASA Astrophysics Data System (ADS)

Smit, J. H. W.; Cloetingh, S. A. P. L.; Burov, E.; Sokoutis, D.; Kaban, M.; Tesauro, M.; Burg, J.-P.

2012-04-01

Although large-scale folding of the crust and the lithosphere in Central Asia as a result of the indentation of India has been extensively documented, the impact of continental collision between Arabia and Eurasia has been largely overlooked. The resulting Neogene shortening and uplift of the Zagros, Albors, Kopet Dagh and Kaukasus mountain belts in Iran and surrounding areas is characterised by a simultaneous onset of major topography growth at ca. 5 Ma. At the same time, the adjacent Caspian, Turan and Amu Darya basins underwent an acceleration in subsidence. It is common knowledge that waves with different orientations will interfere with each other. Folding, by its nature similar to a standing wave, is not likely to be an exception. We demonstrate that collision of the Eurasian plate with the Arabian and Indian plates generates folding of the Eurasian lithosphere in two different directions and that interaction between both generates characteristic interference patterns that can be recognised from the regional gravity signal. We present evidence for interference of lithospheric folding patterns induced by Arabian and Indian collision with Eurasia. Wavelengths (from 50 to 250 km) and spatial patterns are inferred from satellite-derived topography and gravity models and attest for rheologically stratified lithosphere with relatively strong mantle rheology (thickness of strong mechanical core on the order of 40-50 km) and less competent crust (thickness of the mechanical core on the order of 10-15 km). The observations are compared with inferences from numerical and analogue tectonic experiments for a quantitative assessment of factors such as lithosphere rheology and stratification, lateral variations in lithosphere strength, thermo-mechanical age and distance to the plate boundary on the activity of folding as a mechanism of intra-plate deformation in this area. The observed interference of the patterns of folding appears to be primarily the result of spatial orientation of the two indenters, differences in their convergence velocities and the thermo-mechanical structure of the lithosphere west and east of the Kugitang-Tunka line.

Comments on “Arc magmatism and subduction history beneath the Zagros Mountains, Iran: A new report of adakites and geodynamic consequences” by J. Omrani, P. Agard, H. Whitechurch, M. Bennoit, G. Prouteau, L. Jolivet

NASA Astrophysics Data System (ADS)

Aftabi, Alijan; Atapour, Habibeh

2009-12-01

Based on the imprecise geochemical data for 62 samples from Qom, Anar and Baft regions in central Iranian magmatic arc Omrani et al. (Omrani, J., Agard, P., Witechurch, H., Benoit, M., Prouteau, G., Jolivet, L., 2008. Arc magmatism and subduction history beneath the Zagsros Mountains, Iran: A new report of adakites and geodynamic consequences. Lithos 106, 380-398.), suggested that all studied magmatic rocks display the geochemical affinity of subduction-related calc-alkalic rock suites. Here, we demonstrate that the incorrect altered and variable geochemical data (e.g., Al 2O 3, Sr, Y, Ni, Cr, SiO 2, Na 2O, La/Yb and Th/Ce), show that most of the samples actually display calc-alkaline, shoshonitic and calc-alkalic-adakitic affinities. Furthermore, as a result of alteration, rock samples of similar age (e.g., Qom) indicate both adakitic and non-adakitic compositional signatures, which is misleading. On the basis of more than 400 previously published geochemical analyses, we suggest that, after eliminating the false geochemical signatures, the calc-alkaline and adakitic affinities of the central Iranian magmatic arc are due to flat subduction and might be related to a second phase of Miocene- Pliocene porphyry copper mineralization, which is a considerable exploration target and thus merits further investigation.

Geological and Tectonic Evidence for the Formation and Extensional Collapse of the West Antarctic Plateau: Implications for the Formation of the West Antarctic Rift System and the Transantarctic Mountains

NASA Astrophysics Data System (ADS)

Fitzgerald, P. G.; Studinger, M.; Bialas, R. W.; Buck, W.

2007-12-01

The Transantarctic Mountains (TAM), the world's longest and highest non-contractional intracontinental mountain belt, define the western boundary of the West Antarctic rift system (WARS). The WARS is a broad region of extended continental lithosphere, ca. 750-1000 km wide, lying dominantly below sea-level. A new model (Bialas et al., 2007), proposes that a region of thickened continental crust and high-standing topography, the "West Antarctic Plateau", underwent extensional collapse to leave a remnant edge representing the proto-TAM. Tectonic and paleogeographic reconstructions indicate the plateau formed inboard of a continental arc along the paleo- Pacific margin of Antarctica, active throughout the Paleozoic until the late Mesozoic. This high-standing region was responsible for confining sediments (Beacon Supergroup) to elongate basins along the length of the TAM. Much of the present region of the WARS has been correlated with the Lachlan Fold belt of southeastern Australia. This belt formed from the Ordovician to Carboniferous during back-arc basin formation associated with slab roll- back with short periods of compression. Convergence along the paleo-Pacific margin, perhaps enhanced by subduction of more buoyant oceanic lithosphere as the Phoenix-Pacific ridge was obliquely subducted, resulted in crustal thickening and formation of high-standing terrain (the plateau). Extensional collapse of the plateau most likely began in the Jurassic during initial rifting between East and West Antarctica, but was mainly accomplished during distributed rifting in the Cretaceous (ca. 105-85) following subduction of the Phoenix-Pacific ridge and prior to the separation of New Zealand from Marie Byrd Land. Continued formation of the TAM continued in the Cenozoic concomitant with extension in the WARS that was localized along its western margin adjacent to the TAM. Glacial erosion in the Oligocene and early-Miocene enhanced peak height in the TAM. In this presentation we discuss the diverse geological, geophysical, thermochronological and tectonic evidence for the West Antarctic Plateau and the implications for the formation of the Transantarctic Mountains.

Mountain Building in Central and Western Tien Shan Orogen: Insight from Joint Inversion of Surface Wave Phase Velocities and Body Wave Travel Times

NASA Astrophysics Data System (ADS)

Wu, S.; Yang, Y.; Wang, K.

2017-12-01

The Tien Shan orogeny, situated in central Asia about 2000 km away from the collision boundary between Indian plate and Eurasian plate, is one of the highest, youngest, and most active intracontinental mountain belts on the earth. It first formed during the Paleozoic times and became reactivated at about 20Ma. Although many studies on the dynamic processes of the Tien Shan orogeny have been carried out before, its tectonic rejuvenation and uplift mechanism are still being debated. A high-resolution model of crust and mantle beneath Tien Shan is critical to discern among competing models for the mountain building. In this study, we collect and process seismic data recorded by several seismic arrays in the central and western Tien Shan region to generate surface wave dispersion curves at 6-140 s period using ambient noise tomography (ANT) and two-plane surface wave tomography (TPWT) methods. Using these dispersion curves, we construct a high-resolution 3-D image of shear wave velocity (Vs) in the crust and upper mantle up to 300 km depth. Our current model constrained only by surface waves shows that, under the Tien Shan orogenic belt, a strong low S-wave velocity anomaly exists in the uppermost mantle down to the depth of 200km, supporting the model that the hot upper mantle is upwelling under the Tien Shan orogenic belt, which may be responsible for the mountain building. To the west of central Tien Shan across the Talas-Fergana fault, low S-wave velocity anomalies in the upper mantle become much weaker and finally disappear beneath the Fergana basin. Because surface waves are insensitive to the structures below 300 km, body wave arrival times will be included for a joint inversion with surface waves to generate S-wave velocity structure from the surface down to the mantle transition zone. The joint inversion of both body and surface waves provide complementary constraints on structures at different depths and helps to achieve a more realistic model compared with body wave or surface wave tomography alone. The joint inversion model will be presented.

From micron to mountain-scale, using accessory phase petrochronology to quantify the rates of deformation in the Himalaya and beyond

NASA Astrophysics Data System (ADS)

Mottram, C. M.

2016-12-01

Mountains form where the Earth's plates collide; during this upheaval rocks are deformed by massive forces. The rates and timescales over which these deformational processes occur are determined from tiny accessory minerals that record geological time through radioactive decay. However, there remain major unresolved challenges in using chemical and microstructural markers to link the dates yielded from these accessory phases to specific deformation events and discerning the effects of deformation on the isotopic and elemental tracers in these phases. Here, the chemical signatures and deformation textures from micron-scale accessory phases are used to decode the record of mountain belt-scale deformational processes encrypted in the rocks. The Himalayan orogen is used as an ideal natural laboratory to understand the chemical processes that have modified the Earth's crust during orogenesis. Combined laser ablation split-stream U-Th-Pb and REE analysis of deformed monazite and titanite, along with Electron BackScatter Diffraction (EBSD) imaging and Pressure-Temperature (P-T) phase equilibria modelling are used to: (1) link accessory phase `age' to `metamorphic stage'; (2) to quantify the influence of deformation on monazite (re)crystallisation mechanisms and its subsequent effect on the crystallographic structure, ages and trace-element distribution in individual grains; and (3) understand how deformation is accommodated through different chemical and structural processes that operate at varying scales through time. This study highlights the importance of fully integrating the pressure-temperature-time-deformation history of multiple accessory phases to better interpret the deformational history of the cores of evolving mountain belts.

Geologic map of the Yucca Mountain region, Nye County, Nevada

USGS Publications Warehouse

Potter, Christopher J.; Dickerson, Robert P.; Sweetkind, Donald S.; Drake II, Ronald M.; Taylor, Emily M.; Fridrich, Christopher J.; San Juan, Carma A.; Day, Warren C.

2002-01-01

Yucca Mountain, Nye County, Nev., has been identified as a potential site for underground storage of high-level radioactive waste. This geologic map compilation, including all of Yucca Mountain and Crater Flat, most of the Calico Hills, western Jackass Flats, Little Skull Mountain, the Striped Hills, the Skeleton Hills, and the northeastern Amargosa Desert, portrays the geologic framework for a saturated-zone hydrologic flow model of the Yucca Mountain site. Key geologic features shown on the geologic map and accompanying cross sections include: (1) exposures of Proterozoic through Devonian strata inferred to have been deformed by regional thrust faulting and folding, in the Skeleton Hills, Striped Hills, and Amargosa Desert near Big Dune; (2) folded and thrust-faulted Devonian and Mississippian strata, unconformably overlain by Miocene tuffs and lavas and cut by complex Neogene fault patterns, in the Calico Hills; (3) the Claim Canyon caldera, a segment of which is exposed north of Yucca Mountain and Crater Flat; (4) thick densely welded to nonwelded ash-flow sheets of the Miocene southwest Nevada volcanic field exposed in normal-fault-bounded blocks at Yucca Mountain; (5) upper Tertiary and Quaternary basaltic cinder cones and lava flows in Crater Flat and at southernmost Yucca Mountain; and (6) broad basins covered by Quaternary and upper Tertiary surficial deposits in Jackass Flats, Crater Flat, and the northeastern Amargosa Desert, beneath which Neogene normal and strike-slip faults are inferred to be present on the basis of geophysical data and geologic map patterns. A regional thrust belt of late Paleozoic or Mesozoic age affected all pre-Tertiary rocks in the region; main thrust faults, not exposed in the map area, are interpreted to underlie the map area in an arcuate pattern, striking north, northeast, and east. The predominant vergence of thrust faults exposed elsewhere in the region, including the Belted Range and Specter Range thrusts, was to the east, southeast, and south. The vertical to overturned strata of the Striped Hills are hypothesized to result from successive stacking of three south-vergent thrust ramps, the lowest of which is the Specter Range thrust. The CP thrust is interpreted as a north-vergent backthrust that may have been roughly contemporaneous with the Belted Range and Specter Range thrusts. The southwest Nevada volcanic field consists predominantly of a series of silicic tuffs and lava flows ranging in age from 15 to 8 Ma. The map area is in the southwestern quadrant of the southwest Nevada volcanic field, just south of the Timber Mountain caldera complex. The Claim Canyon caldera, exposed in the northern part of the map area, contains thick deposits of the 12.7-Ma Tiva Canyon Tuff, along with widespread megabreccia deposits of similar age, and subordinate thick exposures of other 12.8- to 12.7-Ma Paintbrush Group rocks. An irregular, blocky fault array, which affects parts of the caldera and much of the nearby area, includes several large-displacement, steeply dipping faults that strike radially to the caldera and bound south-dipping blocks of volcanic rock. South and southeast of the Claim Canyon caldera, in the area that includes Yucca Mountain, the Neogene fault pattern is dominated by closely spaced, north-northwest- to north-northeast-striking normal faults that lie within a north-trending graben. This 20- to 25-km-wide graben includes Crater Flat, Yucca Mountain, and Fortymile Wash, and is bounded on the east by the 'gravity fault' and on the west by the Bare Mountain fault. Both of these faults separate Proterozoic and Paleozoic sedimentary rocks in their footwalls from Miocene volcanic rocks in their hanging walls. Stratigraphic and structural relations at Yucca Mountain demonstrate that block-bounding faults were active before and during eruption of the 12.8- to 12.7-Ma Paintbrush Group, and significant motion on these faults continued unt

Aeromagnetic evidence for a major strike-slip fault zone along the boundary between the Weddell Sea Rift and East Antarctica

NASA Astrophysics Data System (ADS)

Jordan, T. A.; Ferraccioli, F.; Ross, N.; Siegert, M. J.; Corr, H.; Leat, P. T.; Bingham, R. G.; Rippin, D. M.; le Brocq, A.

2012-04-01

The >500 km wide Weddell Sea Rift was a major focus for Jurassic extension and magmatism during the early stages of Gondwana break-up, and underlies the Weddell Sea Embayment, which separates East Antarctica from a collage of crustal blocks in West Antarctica. Here we present new aeromagnetic data combined with airborne radar and gravity data collected during the 2010-11 field season over the Institute and Moeller ice stream in West Antarctica. Our interpretations identify the major tectonic boundaries between the Weddell Sea Rift, the Ellsworth-Whitmore Mountains block and East Antarctica. Digitally enhanced aeromagnetic data and gravity anomalies indicate the extent of Proterozoic basement, Middle Cambrian rift-related volcanic rocks, Jurassic granites, and post Jurassic sedimentary infill. Two new joint magnetic and gravity models were constructed, constrained by 2D and 3D magnetic depth-to-source estimates to assess the extent of Proterozoic basement and the thickness of major Jurassic intrusions and post-Jurassic sedimentary infill. The Jurassic granites are modelled as 5-8 km thick and emplaced at the transition between the thicker crust of the Ellsworth-Whitmore Mountains block and the thinner crust of the Weddell Sea Rift, and within the Pagano Fault Zone, a newly identified ~75 km wide left-lateral strike-slip fault system that we interpret as a major tectonic boundary between East and West Antarctica. We also suggest a possible analogy between the Pagano Fault Zone and the Dead Sea transform. In this scenario the Jurassic Pagano Fault Zone is the kinematic link between extension in the Weddell Sea Rift and convergence across the Pacific margin of West Antarctica, as the Dead Sea transform links Red Sea extension to compression within the Zagros Mountains.

Deformation during terrane accretion in the Saint Elias orogen, Alaska

USGS Publications Warehouse

Bruhn, R.L.; Pavlis, T.L.; Plafker, G.; Serpa, L.

2004-01-01

The Saint Elias orogen of southern Alaska and adjacent Canada is a complex belt of mountains formed by collision and accretion of the Yakutat terrane into the transition zone from transform faulting to subduction in the northeast Pacific. The orogen is an active analog for tectonic processes that formed much of the North American Cordillera, and is also an important site to study (1) the relationships between climate and tectonics, and (2) structures that generate large- to great-magnitude earthquakes. The Yakutat terrane is a fragment of the North American plate margin that is partly subducted beneath and partly accreted to the continental margin of southern Alaska. Interaction between the Yakutat terrane and the North American and Pacific plates causes significant differences in the style of deformation within the terrane. Deformation in the eastern part of the terrane is caused by strike-slip faulting along the Fairweather transform fault and by reverse faulting beneath the coastal mountains, but there is little deformation immediately offshore. The central part of the orogen is marked by thrusting of the Yakutat terrane beneath the North American plate along the Chugach-Saint Elias fault and development of a wide, thin-skinned fold-and-thrust belt. Strike-slip faulting in this segment may he localized in the hanging wall of the Chugach-Saint Elias fault, or dissipated by thrust faulting beneath a north-northeast-trending belt of active deformation that cuts obliquely across the eastern end of the fold-and-thrust belt. Superimposed folds with complex shapes and plunging hinge lines accommodate horizontal shortening and extension in the western part of the orogen, where the sedimentary cover of the Yakutat terrane is accreted into the upper plate of the Aleutian subduction zone. These three structural segments are separated by transverse tectonic boundaries that cut across the Yakutat terrane and also coincide with the courses of piedmont glaciers that flow from the topographic backbone of the Saint Elias Mountains onto the coastal plain. The Malaspina fault-Pamplona structural zone separates the eastern and central parts of the orogen and is marked by reverse faulting and folding. Onshore, most of this boundary is buried beneath the western or "Agassiz" lobe of the Malaspina piedmont glacier. The boundary between the central fold-and-thrust belt and western zone of superimposed folding lies beneath the middle and lower course of the Bering piedmont glacier. ?? 2004 Geological Society of America.

Multiscale Local Forcing of the Arabian Desert Daytime Boundary Layer, and Implications for the Dispersion of Surface-Released Contaminants.

NASA Astrophysics Data System (ADS)

Warner, Thomas T.; Sheu, Rong-Shyang

2000-05-01

Four 6-day simulations of the atmospheric conditions over the Arabian Desert during the time of the 1991 detonation and release of toxic material at the Khamisiyah, Iraq, weapons depot were performed using a mesoscale model run in a data-assimilation mode. These atmospheric simulations are being employed in a forensic analysis of the potential contribution of the toxic material to so-called Gulf War illness. The transport and concentration of such surface-released contaminants are related strongly to the planetary boundary layer (PBL) depth and the horizontal wind speed in the PBL. The product of the PBL depth and the mean wind speed within it is referred to as the ventilation and is used as a metric of the horizontal transport within the PBL. Thus, a corollary study to the larger forensic analysis involves employing the model solutions and available data in an analysis of the multiscale spatial variability of the daytime desert PBL depth and ventilation as they are affected by surface forcing from terrain elevation variations, coastal circulations, and contrasts in surface physical properties.The coarsest computational grid spanned the entire northern Arabian Desert and surrounding areas of the Middle East, and represented the large-scale PBL modulation by the orography. The PBL depths were greatest over the high elevations of the western Arabian Peninsula and over the Zagros Mountains in western Iran and were shallowest over water bodies and the lower elevations in the Tigris-Euphrates Valley. Higher-resolution grids in the nest (the smallest grid increment was 3.3 km) showed that the PBL depth minimum in the Tigris-Euphrates Valley was likely a consequence of compensating subsidence associated with the thermally forced daytime upward motion over the Zagros Mountains to the east in Iran, with possible contributions from an elevated mixed layer. Further local modulation of the daytime desert PBL occurred as a result of the inland penetration of the coastal sea-breeze circulation on the west side of the Persian Gulf, where PBL depths were suppressed as far as 100 km inland. On the finest scales, significant PBL-depth variability resulted from surface thermal differences associated with contrasts between barren desert and partially vegetated desert.The average 1500 LT ventilation over the Arabian Desert for the 6-day period varied spatially from less than 4000 m2 s1 to over 24000 m2 s1. This range represents over a factor-of-6 variation in the ability of the atmosphere to transport contaminants away from a source region.

Application of a time probabilistic approach to seismic landslide hazard estimates in Iran

NASA Astrophysics Data System (ADS)

Rajabi, A. M.; Del Gaudio, V.; Capolongo, D.; Khamehchiyan, M.; Mahdavifar, M. R.

2009-04-01

Iran is a country located in a tectonic active belt and is prone to earthquake and related phenomena. In the recent years, several earthquakes caused many fatalities and damages to facilities, e.g. the Manjil (1990), Avaj (2002), Bam (2003) and Firuzabad-e-Kojur (2004) earthquakes. These earthquakes generated many landslides. For instance, catastrophic landslides triggered by the Manjil Earthquake (Ms = 7.7) in 1990 buried the village of Fatalak, killed more than 130 peoples and cut many important road and other lifelines, resulting in major economic disruption. In general, earthquakes in Iran have been concentrated in two major zones with different seismicity characteristics: one is the region of Alborz and Central Iran and the other is the Zagros Orogenic Belt. Understanding where seismically induced landslides are most likely to occur is crucial in reducing property damage and loss of life in future earthquakes. For this purpose a time probabilistic approach for earthquake-induced landslide hazard at regional scale, proposed by Del Gaudio et al. (2003), has been applied to the whole Iranian territory to provide the basis of hazard estimates. This method consists in evaluating the recurrence of seismically induced slope failure conditions inferred from the Newmark's model. First, by adopting Arias Intensity to quantify seismic shaking and using different Arias attenuation relations for Alborz - Central Iran and Zagros regions, well-established methods of seismic hazard assessment, based on the Cornell (1968) method, were employed to obtain the occurrence probabilities for different levels of seismic shaking in a time interval of interest (50 year). Then, following Jibson (1998), empirical formulae specifically developed for Alborz - Central Iran and Zagros, were used to represent, according to the Newmark's model, the relation linking Newmark's displacement Dn to Arias intensity Ia and to slope critical acceleration ac. These formulae were employed to evaluate the slope critical acceleration (Ac)x for which a prefixed probability exists that seismic shaking would result in a Dn value equal to a threshold x whose exceedence would cause landslide triggering. The obtained ac values represent the minimum slope resistance required to keep the probability of seismic-landslide triggering within the prefixed value. In particular we calculated the spatial distribution of (Ac)x for x thresholds of 10 and 2 cm in order to represent triggering conditions for coherent slides (e.g., slumps, block slides, slow earth flows) and disrupted slides (e.g., rock falls, rock slides, rock avalanches), respectively. Then we produced a probabilistic national map that shows the spatial distribution of (Ac)10 and (Ac)2, for a 10% probability of exceedence in 50 year, which is a significant level of hazard equal to that commonly used for building codes. The spatial distribution of the calculated (Ac)xvalues can be compared with the in situ actual ac values of specific slopes to estimate whether these slopes have a significant probability of failing under seismic action in the future. As example of possible application of this kind of time probabilistic map to hazard estimates, we compared the values obtained for the Manjil region with a GIS map providing spatial distribution of estimated ac values in the same region. The spatial distribution of slopes characterized by ac < (Ac)10 was then compared with the spatial distribution of the major landslides of coherent type triggered by the Manjil earthquake. This comparison provides indications on potential, problems and limits of the experimented approach for the study area. References Cornell, C.A., 1968: Engineering seismic risk analysis, Bull. Seism. Soc. Am., 58, 1583-1606. Del Gaudio V., Wasowski J., & Pierri P., 2003: An approach to time probabilistic evaluation of seismically-induced landslide hazard. Bull Seism. Soc. Am., 93, 557-569. Jibson, R.W., E.L. Harp and J.A. Michael, 1998: A method for producing digital probabilistic seismic landslide hazard maps: an example from the Los Angeles, California, area, U.S. Geological Survey Open-File Report 98-113, Golden, Colorado, 17 pp.

Effects of shelterwood management on flower-visiting insects and their floral resources

Treesearch

Jessica E. Fultz

2005-01-01

Habitat alteration can affect pollinating-insect community structure, decreasing the efficiency of pollinators on which many agricultural and natural ecosystems rely. Within the Tenderfoot Creek Experimental Forest (TCEF), located in the Little Belt Mountains of Central Montana, two different types of silvicultural techniques, even and group shelterwood, were applied...

Geology [Chapter 4

Treesearch

E. A. Rochette

1994-01-01

The Medicine Bow Mountains have a core of Precambrian rocks. They contain the boundary, the Cheyenne Belt, between the Wyoming Province to the NW and the accreted Proterozoic continental crust to the SE (Karlstrom and Houston 1984). The Wyoming Province consists of Archean rocks that are locally intruded and (or) overlain by rocks of Proterozoic age, including the...

56. VIEW OF ROASTER ADDITION FROM NORTH. ELEVATOR/ORE BIN TOWER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

56. VIEW OF ROASTER ADDITION FROM NORTH. ELEVATOR/ORE BIN TOWER WAS FED BY THE 14 INCH BELT CONVEYOR SUPPORTED ON BENT, LOWER RIGHT. THE ROTATING BAKER COOLER IS SUPPORTED BY A CONCRETE FOUNDATION TROUGH. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Supplement III to Changes in Farm Production and Efficiency.

ERIC Educational Resources Information Center

Economic Research Service (USDA), Washington, DC.

This publication contains data on man-hours of labor used for farmwork in the farm production regions of the Northeast, Lake States, Corn Belt, Northern Plains, Appalachia, Southeast, Delta States, Southern Plains, Mountain, and Pacific. Regional data from 1950-1958 are provided in table form for the livestock enterprises of meat animals, milk…

Bouguer gravity trends and crustal structure of the Palmyride Mountain belt and surrounding northern Arabian platform in Syria

NASA Astrophysics Data System (ADS)

Best, John A.; Barazangi, Muawia; Al-Saad, Damen; Sawaf, Tarif; Gebran, Ali

1990-12-01

This study examines the crustal structure of the Palmyrides and the northern Arabian platform in Syria by two- and three-dimensional modeling of the Bouguer gravity anomalies. Results of the gravity modeling indicate that (1) western Syria is composed of at least two different crustal blocks, (2) the southern crustal block is penetrated by a series of crustal-scale, high-density intrusive complexes, and (3) short-wavelength gravity anomalies in the southwest part of the mountain belt are clearly related to basement structure. The crustal thickness in Syria, as modeled on the gravity profiles, is approximately 40 ±4 km, which is similar to crustal thicknesses interpreted from refraction data in Jordan and Saudi Arabia. The different crustal blocks and large-scale mafic intrusions are best explained, though not uniquely, by Proterozoic convergence and suturing and early Paleozoic rifting, as interpreted in the exposed rocks of the Arabian shield. These two processes, combined with documented Mesozoic rifting and Cenozoic transpression, compose the crustal evolution of the northern Arabian platform beneath Syria.

Drainage reorganization during mountain building in the river system of the Eastern Cordillera of the Colombian Andes

NASA Astrophysics Data System (ADS)

Struth, Lucía; Babault, Julien; Teixell, Antonio

2015-12-01

The Eastern Cordillera of Colombia is a thick-skinned thrust-fold belt that is characterized by two topographic domains: (1) the axial zone, a high altitude plateau (the Sabana de Bogotá, 2500 masl) with low local relief and dominated by longitudinal rivers, and (2) the Cordillera flanks, where local relief exceeds 1000 m and transverse rivers dominate. On the basis of an analysis of digital topography and river parameters combined with a review of paleodrainage data, we show that the accumulation of shortening and crustal thickening during the Andean orogeny triggered a process of fluvial reorganization in the Cordillera. Owing to a progressive increase of the regional slope, the drainage network evolves from longitudinal to transverse-dominated, a process that is still active at present. This study provides the idea of progressive divide migration toward the inner part of the mountain belt, by which the area of the Sabana de Bogotá plateau is decreasing, the flanks increase in area, and ultimately transverse rivers will probably dominate the drainage of the Cordillera.

Plutonism in the central part of the Sierra Nevada Batholith, California

USGS Publications Warehouse

Bateman, Paul C.

1992-01-01

The Sierra Nevada batholith comprises the plutonic rocks of Mesozoic age that underlie most of the Sierra Nevada, a magnificent mountain range that originated in the Cenozoic by the westward tilting of a huge block of the Earth's crust. Scattered intrusions west of the batholith in the western metamorphic belt of the Sierra Nevada and east of the Sierra Nevada in the Benton Range and the White and Inyo Mountains are satellitic to but not strictly parts of the Sierra Nevada batholith. Nevertheless, all the plutonic rocks are related in origin. The batholith lies along the west edge of the Paleozoic North American craton, and Paleozoic and early Mesozoic oceanic crust underlies its western margin. It was emplaced in strongly deformed but weakly metamorphosed strata ranging in age from Proterozoic to Cretaceous. Sedimentary rocks of Proterozoic and Paleozoic age crop out east of the batholith in the White and Inyo Mountains, and metamorphosed sedimentary and volcanic rocks of Paleozoic and Mesozoic age crop out west of the batholith in the western metamorphic belt. A few large and many small, generally elongate remnants of metamorphic rocks lie within the batholith. Sparse fossils from metasedimentary rocks and isotopic ages for metavolcanic rocks indicate that the metamorphic rocks in the remnants range in age from Early Cambrian to Early Cretaceous. Within the map area (the Mariposa 1 0 by 2 0 quadrangle), the bedding, cleavage, and axial surfaces of folds generally trend about N. 35 0 W., parallel to the long axis of the Sierra Nevada. The country rocks comprise strongly deformed but generally coherent sequences; however, some units in the western metamorphic belt may partly consist of melanges. Most sequences are in contact with other sequences, at least for short distances, but some sequences within the batholith are bounded on one or more sides by plutonic rocks. Proterozoic and Paleozoic sedimentary strata east of the Sierra Nevada and Paleozoic strata in remnants of country rocks within the eastern part of the batholith, although strongly deformed, are autochthonous or have been displaced only short distances, whereas some Mesozoic strata in the western metamorphic belt may be allochthonous. Probably the strata in the western metamorphic belt were deposited in marginal basins and island arcs, but the possibility that they were transported from distant places has not been disproved. All the country rocks have been strongly deformed, most of them more than once. Tectonic disturbances occurred during the Devonian and Mississippian (Antler? orogeny), the Permian and (or) Early Triassic (Sonoman? orogeny), the Late Jurassic (Nevadan orogeny), and at various other times during emplacement of the batholith and uplift that accompanied and followed its emplacement. The strata in the western metamorphic belt probably were deformed in an early Mesozoic subduction complex. The plutonic rocks range in composition from gabbro to leucogranite, but tonalite, granodiorite, and granite are the most common rock types. Most are medium to coarse grained, but some small rock masses are fine grained. Most have hypidiomorphic-granular textures and are equigranular, but some having compositions close to the boundary between granite and granodiorite contain large crystals of alkali feldspar. Serpentinized ultramafic rocks are present locally in the western metamorphic belt within and adjacent to the Melones fault zone. Except for serpentinized ultramafic rocks, trondhjemite, and most granites, all the plutonic rocks contain significant amounts of hornblende. Most of the granitoids are metaluminous or weakly peraluminous; strongly peraluminous granites are present only in the White Mountains. Most of the granitoids are assigned to units of lithodemic rank, and most of these units are assigned to intrusive suites. Plutons assigned to the same lithodeme are composed of rock of similar composition, fabric, and age and are presumed to h

Major, trace element and stable isotope geochemistry of synorogenic breccia bodies, Ellsworth Mountains, Antarctica

USGS Publications Warehouse

Craddock, J.P.; McGillion, M.S.; Webers, G.F.

2007-01-01

Cambrian carbonates in the Heritage Range of the Ellsworth Mountains, West Antarctica host a series of carbonate-rich breccia bodies that formed contemporaneously with the Permian Gondwanide orogen. The breccia bodies had a three-stage genesis, with the older breccias containing Cambrian limestone (and marble) clasts supported by calcite, whereas the younger breccias are nearly clast-free and composed entirely of matrix calcite. Breccia clasts, calcite matrix and detrital matrix samples were analyzed using x-ray fluorescence (major and trace elements), x-ray diffraction, and stable isotopes (C, O) and suggest that the breccias formed as part of a closed geochemical system, at considerable depth, within the Cambrian limestone host as the Ellsworth Mountains deformed into a fold-and-thrust belt along the margin of Gondwana

Interpretation of recent gravity profiles over the ophiolite belt, Northern Oman Mountains, United Arab Emirates

NASA Astrophysics Data System (ADS)

Khattab, M. M.

1993-04-01

The compiled Bouguer gravity anomaly map over parts of the ophiolite rocks of the Northern Oman Mountains suggests the existence of three partially serpentinized nappes: two along the Gulf of Oman coast with axes near Dadnah, near Fujira and the third 17 km SSE of Masafi. Modeling of the subsurface geology, beneath two gravity profiles (Diba-Kalba and Masafi-Fujira), is based on the occurrence (field evidence) of multiphase low-angle thrusting of the members of the Tethyan lithosphere in northern and Oman Mountains. An assumed crustal model at the Arabian continental margin, beneath the Masafi-Fujira profile, is made to explain an intense gravity gradient. Gravity interpretation is not inconsistent with a gliding mechanism for obduction of the ophiolite on this part of the Arabian continental margin.

Geomorphological approach in karstic domain: importance of underground water in the Jura mountains.

NASA Astrophysics Data System (ADS)

Rabin, Mickael; Sue, Christian; Champagnac, Jean Daniel; Bichet, Vincent; Carry, Nicolas; Eichenberger, Urs; Mudry, Jacques; Valla, Pierre

2014-05-01

The Jura mountain belt is the north-westernmost and one of the most recent expressions of the Alpine orogeny (i.e. Mio-Pliocene times). The Jura has been well studied from a structural framework, but still remains the source of scientific debates, especially regarding its current and recent tectonic activity [Laubscher, 1992; Burkhard and Sommaruga, 1998]. It is deemed to be always in a shortening state, according to leveling data [Jouanne et al., 1998] and neotectonic observations [Madritsch et al., 2010]. However, the few GPS data available on the Jura do not show evidence of shortening, but rather a low-magnitude extension parallel to the arc [Walpersdorf et al., 2006]. Moreover, the traditionally accepted assumption of a collisional activity of the Jura raises the question of its geodynamic origin. The Western Alps are themselves in a post-collisional regime and characterized by a noticeable isostatic-related extension, due to the interaction between buoyancy forces and external dynamics [Sue et al., 2007]. Quantitative morphotectonic approaches have been increasingly used in active mountain belts to infer relationship between climates and tectonics in landscape evolution [Whipple, 2009]. In this study, we propose to apply morphometric tools to calcareous bedrock, in a slowly deformed mountain belt. In particular, we have used watersheds metrics determination and associated river profiles analysis to allow quantifying the degree and nature of the equilibrium between the tectonic forcing and the fluvial erosional agent [Kirby and Whipple, 2001]. Indeed, long-term river profiles evolution is controlled by climatic and tectonic forcing through the following expression [Whipple and Tucker, 1999]: S = (U / K) 1/n Am/n (with U: uplift rate, K: empirical erodibility factor, function of hydrological and geological settings; A: drained area, m, n: empirical parameters). We present here a systematic analysis of river profiles applied to the main drainage system of the Jura. The objective is to assess to what extent this powerful landscape analysis tool will be applicable to limestone bedrock settings where groundwater flow might be an important component of the hydrological system. First results show that river slopes and knickpoints are poorly controlled by lithological variation within the Jura mountains. Quantitative analyses reveal abnormal longitudinal profiles, which are controlled by either tectonic and/or karstic processes. Evaluating the contribution of both tectonics and karst influence in the destabilization of river profiles is challenging and appears still unresolved. However these morphometrics signals seem to be in accordance with the presence of active N-S to NW-SE strike-slip faults, controlling both surface runoff and groundwater flow.

Lithospheric buckling and far-foreland deformation during the Laramide and Appalachian orogenies

NASA Astrophysics Data System (ADS)

Tikoff, B.; Siddoway, C. S.

2017-12-01

Major intraplate tectonics within North America (Laurentia) occurs during times of major orogenesis along the plate margins. During mountain building, typical structures of the hinterland are an orogenic plateau and fold-and-thrust belts, while in the far foreland (intraplate) areas long-wavelength ( 200 km or longer) folds and fault-reactivation features form. Long-wavelength folds are evident in both the Appalachian and Laramide orogenic forelands, with the stratigraphy recording the timing of the uplift. This contribution examines the model of lithospheric buckling - periodic folding associated with a horizontal endload on the edge of the plate - based on scaled, physical experiments and corroborated by numerical models. The Laramide (75-55 Ma) intraplate orogen in the classical location in Wyoming contains basement-cored arches spaced 200 km apart, for which the mechanism of uplift is questioned. Seismic evidence obtained for the Bighorn uplift, Wyoming, obtained by the EarthScope Bighorn project, shows an upwarp of the Moho beneath, but oblique to the trend of the surface exposure of the basement arch. Both the surface and Moho exhibit approximately the same structural relief. The seismic data exhibit no evidence for a regionally continuous decollement, nor is there evidence of rotation of structural markers within these features, of the type that is observed in the detached fold-and-thrust belt. The intraplate region affected by long-wavelength folding includes western Wyoming, with continuation of some features across the E-W-oriented Cheyenne belt (e.g., Rock Springs-Douglas Creek arch), Colorado Plateau, and High Plains east of the Rocky Mountains, where surface and subsurface structures display a series of anticlinal arches ("plains-type" folds). Appalachian mountain building also caused long-wavelength folding, with a spacing consistent with lithospheric buckling, mostly associated with the Devonian Acadian orogeny. The Laramide arches in the High Plains seem to occur on arches inherited from the Appalachian orogeny, suggesting the permanence of these lithospheric buckles once they have formed.

Tectonic and climatic controls on fan systems: The Kohrud mountain belt, Central Iran

NASA Astrophysics Data System (ADS)

Jones, Stuart J.; Arzani, Nasser; Allen, Mark B.

2014-04-01

Late Pleistocene to Holocene fans of the Kohrud mountain belt (Central Iran) illustrate the problems of differentiating tectonic and climatic drivers for the sedimentary signatures of alluvial fan successions. It is widely recognised that tectonic processes create the topography that causes fan development. The existence and position of fans along the Kohrud mountain belt, NE of Esfahan, are controlled by faulting along the Qom-Zefreh fault system and associated fault zones. These faults display moderate amounts of historical and instrumental seismicity, and so may be considered to be tectonically active. However, fluvial systems on the fans are currently incising in response to low Gavkhoni playa lake levels since the mid-Holocene, producing incised gullies on the fans up to 30 m deep. These gullies expose an interdigitation of lake deposits (dominated by fine-grained silts and clays with evaporites) and coarse gravels that characterise the alluvial fan sediments. The boundaries of each facies are mostly sharp, with fan sediments superimposed on lake sediments with little to no evidence of reworking. In turn, anhydrite-glauberite, mirabilite and halite crusts drape over the gravels, recording a rapid return to still water, shallow ephemeral saline lake sedimentation. Neither transition can be explained by adjustment of the hinterland drainage system after tectonic uplift. The potential influence in Central Iran of enhanced monsoons, the northward drift of the Intertopical Convergence Zone (ITCZ) and Mediterranean climates for the early Holocene (~ 6-10 ka) point to episodic rainfall (during winter months) associated with discrete high magnitude floods on the fan surfaces. The fan sediments were deposited under the general influence of a highstand playa lake whose level was fluctuating in response to climate. This study demonstrates that although tectonism can induce fan development, it is the sensitive balance between aridity and humidity resulting from changes in the climate regime of Central Iran that influences the nature of fan sequences and how they interrelate to associated facies.

Holocene vegetation and fire history of the mountains of northern Sicily (Italy)

USGS Publications Warehouse

Tinner, Willy; Vescovi, Elisa; Van Leeuwen, Jacqueline; Colombaroli, Daniele; Henne, Paul; Kaltenrieder, Petra; Morales-Molino, Cesar; Beffa, Giorgia; Gnaegi, Bettina; Van der Knaap, Pim W O; La Mantia, Tommaso; Pasta, Salvatore

2016-01-01

Knowledge about vegetation and fire history of the mountains of Northern Sicily is scanty. We analysed five sites to fill this gap and used terrestrial plant macrofossils to establish robust radiocarbon chronologies. Palynological records from Gorgo Tondo, Gorgo Lungo, Marcato Cixé, Urgo Pietra Giordano and Gorgo Pollicino show that under natural or near natural conditions, deciduous forests (Quercus pubescens, Q. cerris, Fraxinus ornus, Ulmus), that included a substantial portion of evergreen broadleaved species (Q. suber, Q. ilex, Hedera helix), prevailed in the upper meso-mediterranean belt. Mesophilous deciduous and evergreen broadleaved trees (Fagus sylvatica, Ilex aquifolium) dominated in the natural or quasi-natural forests of the oro-mediterranean belt. Forests were repeatedly opened for agricultural purposes. Fire activity was closely associated with farming, providing evidence that burning was a primary land use tool since Neolithic times. Land use and fire activity intensified during the Early Neolithic at 5000 bc, at the onset of the Bronze Age at 2500 bc and at the onset of the Iron Age at 800 bc. Our data and previous studies suggest that the large majority of open land communities in Sicily, from the coastal lowlands to the mountain areas below the thorny-cushion Astragalus belt (ca. 1,800 m a.s.l.), would rapidly develop into forests if land use ceased. Mesophilous Fagus-Ilex forests developed under warm mid Holocene conditions and were resilient to the combined impacts of humans and climate. The past ecology suggests a resilience of these summer-drought adapted communities to climate warming of about 2 °C. Hence, they may be particularly suited to provide heat and drought-adaptedFagus sylvatica ecotypes for maintaining drought-sensitive Central European beech forests under global warming conditions.

Refinement of stratigraphy according to the first finds of planktonic species of Orbulina and Praeorbulina from the Guri Limestone of the Mishan Formation in northwest of Bandar Abbas, South Iran

NASA Astrophysics Data System (ADS)

Daneshian, J.; Moallemi, S. A.; Derakhshani, M.

2016-05-01

The Zagros Basin is one of the most universal oil and gas basins that is located in the west to south of Iran and in north of the Arabian Plate. The Guri Member at the bottom of the Mishan Formation, in some areas such as Bandar Abbas hinterland, contains a significant amount of gas. The Bandar Abbas hinterland is located in the southeast of Zagros. The Guri Limestone is the youngest hydrocarbon reservoirs of the Zagros Sedimentary Basin. In this study, a total of 178 samples from the Guri Limestone in the Handun section are investigated for foraminiferal biostratigraphy. The study of foraminifers led to a recognition of 43 genera and 57 species of benthic and planktonic foraminifera. For the first time, planktonic foraminiferal species including Praeorbulina glomerosa, Praeorbulina transitoria, Orbulina suturalis, and Orbulina universa are reported, and based on the identified benthic and planktonic foraminifera taxa, the age of the Guri Member at Handun section is estimated as late Burdigalian to Langhian.

Provenance of the Walash-Naopurdan back-arc-arc clastic sequences in the Iraqi Zagros Suture Zone

NASA Astrophysics Data System (ADS)

Ali, Sarmad A.; Sleabi, Rajaa S.; Talabani, Mohammad J. A.; Jones, Brian G.

2017-01-01

Marine clastic rocks occurring in the Walash and Naopurdan Groups in the Hasanbag and Qalander areas, Kurdistan region, Iraqi Zagros Suture Zone, are lithic arenites with high proportions of volcanic rock fragments. Geochemical classification of the Eocene Walash and Oligocene Naopurdan clastic rocks indicates that they were mainly derived from associated sub-alkaline basalt and andesitic basalt in back-arc and island arc tectonic settings. Major and trace element geochemical data reveal that the Naopurdan samples are chemically less mature than the Walash samples and both were subjected to moderate weathering. The seaway in the southern Neotethys Ocean was shallow during both Eocene and Oligocene permitting mixing of sediment from the volcanic arcs with sediment derived from the Arabian continental margin. The Walash and Naopurdan clastic rocks enhance an earlier tectonic model of the Zagros Suture Zone with their deposition occurring during the Eocene Walash calc-alkaline back-arc magmatism and Early Oligocene Naopurdan island arc magmatism in the final stages of intra-oceanic subduction before the Miocene closure and obduction of the Neotethys basin.

Paraglacial dynamics in Little Ice Age glaciated environments in the Iberian Peninsula

NASA Astrophysics Data System (ADS)

Oliva, Marc; Serrano, Enrique; Ruiz-Fernández, Jesús; Gómez-Ortiz, Antonio; Palacios, David

2017-04-01

Three Iberian mountain ranges encompassed glaciers during the Little Ice Age (LIA): the Pyrenees, Cantabrian Mountains and Sierra Nevada. The gradual warming trend initiated during the second half of the XIX century promoted the progressive shrinking of these glaciers, which completely melted during the first half of the 20th century in the Cantabrian Mountains and Sierra Nevada and reduced by 80% of their LIA extent in the Pyrenees. Currently, the formerly glaciated environments are located within the periglacial belt and still present to a major or lesser degree signs of paraglacial activity. LIA moraines are devoid of vegetation and composed of highly unstable sediments that are being intensely mobilized by slope processes. Inside the moraines, different landforms and processes generated following LIA glacial retreat have generated: (i) buried ice trapped within rock debris supplied from the cirque walls, which has also generated rock glaciers and protalus lobes; (ii) semi-permanent snow fields distributed above the ice-patches remnants of the LIA glaciers, and (iii) small periglacial features such as frost mounds, sorted circles and solifluction landforms generated by processes such as solifluction and cryoturbation. Present-day morphodynamics is mostly related to seasonal frost conditions, though patches of permafrost have formed in some areas in contact with the buried ice. This 'geomorphic permafrost' is undergoing a process of degradation since it is not balanced with present-day climate conditions. This is reflected in the occurrence of multiple collapses and subsidences of the debris cover where the frozen bodies sit. In the highest areas of the Pyrenees there is a permafrost belt next to the small glaciated environments in the highest massifs. Finally, we propose a model for paraglacial activity in Iberian mountain ranges and compare it to other mid-latitude mountain environments as well as to other past deglaciation stages.

The Rocks and Fossils of Glacier National Park: The Story of Their Origin and History

USGS Publications Warehouse

Ross, Clyde P.; Rezak, Richard

1959-01-01

The story of Glacier National Park begins about 500 million years ago, at a time when there were no mountains in the region - only a vast, exceedingly shallow sea, bordered by desolate plains. The sand, clay, and mud, in part very limy, that were laid down in this sea eventually hardened into the rocks that are now known as the Belt series. These are the principal rocks in the park. Scattered through these rocks are crinkled, limy masses of many forms, the remains of deposits made by colonies of algae. After the Belt series was laid down, successive seas slowly advanced and retreated through long ages across what is now Glacier National Park, burying the Belt rocks under younger ones. After another very long time, a gentle uplift, the forerunner of later events, brought this part of the continent above the reach of sea water for the last time. Much later, some 50 million years ago, the disturbance became far more intense. To climax this upheaval, a mass of rock thousands of feet thick and hundreds of miles long was shoved eastward for 35 miles or more. This tremendous dislocation, well exposed along the eastern boundary of the park, is known as the Lewis overthrust. When the rocks of the region emerged from the sea they began to be attacked by erosion. As successive periods of crustal movement and erosion continued, the younger rocks were slowly stripped off the Belt series and sculpture of the latter by weather and water shaped the early Rocky Mountains. The final episode in the park's geologic past was the ice age, beginning about a million years ago. Repeated advances and retreats of the great glaciers in the high valleys accentuated the mountain terrain and developed the scenic grandeur that is now Glacier National Park. One may say that the park is still in the ice age, for some glaciers still exist. The present report, companion to two more technical reports on the region, informally presents the story of the park's development through past eras for readers without geologic training. Many places worth visiting are cited in the text, and a shaded relief map is provided to help find them.

Role of Fluids in Mechanics of Overthrust Faulting on Titan

NASA Astrophysics Data System (ADS)

Liu, Z.; Radebaugh, J.; Harris, R. A.; Christiansen, E. H.

2013-12-01

Since Cassini has unveiled Titan's surface, its mountains have been commonly associated with contractional tectonism. However, in order to form contractional structures on icy satellites, relatively large stresses are required. The stress required to form contractional structures on Ganymede and Europa is 3-8 times that required for extensional features. Sources of such stresses probably do not exist for most icy satellites. Therefore, a paradox has emerged, wherein no stress source is known that is large enough to produce the contractional structures observed on Titan. A possible solution for the strength paradox is inspired by Hubbert and Rubey (1959) who demonstrated how high fluid pressures reduce the normal stress along a fault plane, therefore significantly reducing frictional resistance to thrusting. Since liquid hydrocarbons have been identified on Titan's surface and may flow in the subsurface, we speculate that fluid pressures associated with liquid hydrocarbons in the subsurface significantly reduce the shear strength of the icy crust and enable contractional structures to form without the requiring large stresses. We use critical wedge theory, which is a mechanism for driving fold-and-thrust belt formation, to test if the slope angles of mountains and crustal conditions with estimated fluid pressures favor the formation of fold-thrust belts on Titan. We evaluated 6 mountain belts with available Cassini SARTopo data using critical wedge calculations. The slopes of 10 traces from valley floors to summits are between 0.4 and 2.5 degrees. We use the measured slopes with varying friction coefficients and fluid pressures to calculate the range of dip angles. The results yielded 840 dip angle values, 689 (82%) of which were in a reasonable range, and consistent with fold belt formation in critical wedge settings. We conclude that crustal liquids have played a key role in Titan's tectonic history. Our results highlight the significance of fluids in planetary lithospheres and have implications for tectonics on all solid bodies that may have fluid in their lithospheres, now or in the past. Reference: Hubbert, M. K. & Rubey, W. W. Role of fluid pressure in mechanics of overthrust faulting I. Mechanics of fluid-filled porous solids and its application to overthrust faulting. Geol. Soc. Am. Bull. 70, 2, 115-166 (1959).

Precambrian basement geologic map of Montana; an interpretation of aeromagnetic anomalies

USGS Publications Warehouse

Sims, P.K.; O'Neill, J. M.; Bankey, Viki; Anderson, E.

2004-01-01

Newly compiled aeromagnetic anomaly data of Montana, in conjunction with the known geologic framework of basement rocks, have been combined to produce a new interpretive geologic basement map of Montana. Crystalline basement rocks compose the basement, but are exposed only in the cores of mountain ranges in southwestern Montana. Principal features deduced from the map are: (1) A prominent northeast-trending, 200-km-wide zone of spaced negative anomalies, which extends more than 700 km from southwestern Montana's Beaverhead Mountains to the Canadian border and reflects suturing of the Archean Mexican Hat Block against the Archean Wyoming Province along the Paleoproterozoic Trans-Montana Orogen (new name) at about 1.9-1.8 Ga; (2) North-northwest-trending magnetic lows in northeastern Montana, which reflect the 1.9-1.8 Ga Trans-Hudson Orogen and truncate the older Trans-Montana Zone; and (3) Subtle northwest- and west-trending negative anomalies in central and western Montana, which represent the northernmost segment of brittle-ductile transcurrent faults of the newly recognized Mesoproterozoic Trans-Rocky Mountain fault system. Structures developed in the Proterozoic provided zones of crustal weakness reactivated during younger Proterozoic and Phanerozoic igneous and tectonic activity. For example, the Trans-Montana Zone guided basement involved thrust faulting in southwestern Montana during the Sevier Orogeny. The Boulder Batholith and associated ore deposits and the linear belt of alkaline intrusions to the northeast were localized along a zone of weakness between the Missouri River suture and the Dillon shear zone of the Trans-Montana Orogen. The northwest-trending faults of Trans-Rocky Mountain system outline depocenters for sedimentary rocks in the Belt Basin. This fault system provided zones of weakness that guided Laramide uplifts during basement crustal shortening. Northwest-trending zones have been locally reactivated during Neogene basin-range extension.

U-Pb dating and emplacement history of granitoid plutons in the northern Sanandaj-Sirjan Zone, Iran

NASA Astrophysics Data System (ADS)

Mahmoudi, Shahryar; Corfu, Fernando; Masoudi, Fariborz; Mehrabi, Behzad; Mohajjel, Mohammad

2011-05-01

The Sanandaj-Sirjan Zone (SSZ), which runs parallel to the Zagros fold and thrust belt of Iran, underwent a multistage evolution starting with Neotethys initiation, its subsequent subduction below the Iranian continental crust, and eventual closure during convergence of Arabia towards central Iran. Plutonic complexes are well developed in the northern part of the SSZ and we have dated a number of them by ID-TIMS U-Pb on zircon. The new data record the following events: a Mid Jurassic period that formed the Boroujerd Plutonic Complex (169 Ma), the Astaneh Pluton (168 Ma) and the Alvand Pluton (165 Ma); Late Jurassic emplacement of the Gorveh Pluton (157-149 Ma); Mid Cretaceous (109 Ma) formation of a I-type phase in the Hasan Salary Pluton near Saqqez, followed by Early Paleocene (60 Ma) intrusion of A-type granite in the same pluton; and the youngest intrusive event recorded so far in the SSZ with the intrusion of granite in the Gosheh-Tavandasht Complex near Boroujerd at 34.9 Ma. These different events reflect specific stages of subduction-related magmatism prior to the eventual Miocene collision between the two continental blocks.

Timescales of orogeny: Jurassic construction of the Klamath Mountains

NASA Astrophysics Data System (ADS)

Hacker, Bradley R.; Donato, Mary M.; Barnes, Calvin G.; McWilliams, M. O.; Ernst, W. G.

1995-06-01

An electronic supplement of this material may be obtained on a diskette or Anonymous FTP from KOSMOS.AGU.ORG (LOGIN to AGU's FTP account using ANONYMOUS as the username and GUEST as the password. Go to the right directory by typing CD APEND. Type LS to see what files are available. Type GET and the name of the file to get it. Finally, type EXIT to leave the system.) (Paper 94YCJ2454, Timescales of orogeny: Jurassic construction of the Klamath Mountains, B.R. Hacker, M.M. Donato, C.G. Barnes, M.O. McWilliams, and W.G. Ernst). Diskette may be ordered from American Geophysical Union, 2000 Florida Avenue, N.W., Washington, DC 20009; $15.00. Payment must accompany order. Classical interpretations of orogeny were based on relatively imprecise biostratigraphic and isotopic age determinations that necessitated grouping apparently related features that may in reality have been greatly diachronous. Isotopic age techniques now have the precision required to resolve the timing of orogenic events on a scale much smaller than that of entire mountain belts. Forty-five new 40Ar/39Ar ages from the Klamath Mountains illuminate the deformation, metamorphism, magmatism, and sedimentation involved in the Jurassic construction of that orogen, leading to a new level of understanding regarding how preserved orogenic features relate to ancient plate tectonic processes. The new geochronologic relationships show that many Jurassic units of the Klamath Mountains had 200 Ma or older volcanoplutonic basement. Subsequent formation of a large ˜170 Ma arc was followed by contractional collapse of the arc. Collision with a spreading ridge may have led to large-scale NW-SE extension in the central and northern Klamaths from 167 to ˜155 Ma, coincident with the crystallization of voluminous plutonic and volcanic suites. Marked cooling of a large region of the central Klamath Mountains to below ˜350°C at ˜150 Ma may have occurred as the igneous belt was extinguished by subduction of colder material at deeper structural levels. These data demonstrate that the Klamath Mountains—and perhaps other similar orogens—were constructed during areally and temporally variant episodes of contraction, extension, and magmatism that do not fit classical definitions of orogeny.

Geology and mineral deposits of the St. Regis-Superior area, Mineral County, Montana

USGS Publications Warehouse

Campbell, Arthur B.

1960-01-01

The St. Regis-Superior area occupies about 300 square miles in northwestern Montana and includes parts of the Squaw Peak Range and Coeur d'Alerie Mountains of the northern Rocky Mountains physiographic province. Nearly 50,000 feet of metasedimentary rocks of the Precambrian Belt series, chiefly varieties of quartzite and argillite, underlies most of the area. The Belt series is informally subdivided with reference to the top of the Wallace formation into lower and upper parts. In this area, the lower part of the Belt series is divided into the Prichard, Burke and Revett, St. Regis, and Wallace formations, in order of decreasing age, and the upper part of the Belt series or the Missoula group is divided »into the Spruce, Lupine, Sloway, and Bouchard formations, and an unnamed feldspathic quartzite at Rock Rabbit Ridge, also from oldest to youngest. Formations in the lower part of the Belt series are correlated with formations of the same names in the Coeur d'Alene district, and formations in the upper part of the Belt series are tentatively correlated in part with formations of the Missoula group in the vicinity of Missoula, Mont. Paleozoic quartzite, shale, limestone, and dolomite crop out in several localities in the southeastern part of the area. The limestone unit contains fragments of a single species of Glossopleura of early Middle Cambrian age which, together with lithologic similarities, has been used to correlate at least the quartzite, shale, and limestone part of this Paleozoic sequence with the Flathead sandstone, Gordon shale, and Damnation limestone sequence known elsewhere in northwestern Montana. Several small diabasic dikes and sills are present in the area, generally associated with northwestward-trending faults. The major faults generally trend northwestward and are considered to be part of the Lewis and Clark structural line. The Osburn fault, the major element of the Lewis and Clark line through the Coeur d'Alene district and western Mineral County, has been traced to the east edge of the St. Regis- Superior area, thus extending the mapped length of the fault to about 100 miles. Evidence indicates that this major fault has diminished in intensity in this area and that most of the stress has been relieved along the Boyd Mountain fault that apparently splits from the Osburn fault a few miles west of St. Regis. Stratigraphic and structural evidence indicates a strike-slip right-lateral movement of about 3 miles along the Osburn fault. Horizontal stratigraphic separation along the Boyd Mountain fault indicates a right-lateral movement of about 13 miles.Low-grade regional metamorphism of the sedimentary rocks in the area has caused the recrystallization of quartz grains and the formation of sericite. Argillite and quartzite have been converted to phyllite and foliated quartzite by dynamic metamorphism in a large area north of the central part of the Osburn fault. Some of the shear zones contain a large amount of introduced carbonate minerals. From 1901 through 1953 this area has produced 8,086,827 pounds of zinc, 7,932,958 pounds of lead, 2,053,715 pounds of copper, 584,168 fine ounces of silver, and 588 fine ounces of gold. The lead, sine, and silver have come chiefly from veins in highly foliated rocks near the Osburn fault zone. The attitudes of these veins are controlled in large part by the cleavage. The principal ore minerals are galena, sphalerite, tetrahedrite, and boulangerite, and the gangue minerals are quartz, carbonate minerals, and barite. Most of the copper has come from the Amador vein where chalcopyrite and bornite are the principal ore minerals, and the gangue minerals are pyrite, quartz, and carbonate minerals. The Amador vein occurs in a belt of copper deposits that extends westward into the Coeur d'Alene district. These copper deposits may be genetically associated with diorite dikes and sills lying within the same belt. Fluorspar has been found in three closely spaced prospects along a northward- trending zone of brecciation and small-scale folding in Dry Creek valley. Incomplete production records show that 781 tons of fluorspar has been shipped from 2 of these prospects.

Dynamics of mid-Appalachian red spruce-hardwood ecotones

Treesearch

Adam W. Rollins; Harold S. Adams; Steven L. Stephenson

2010-01-01

Ten belt transects, each consisting of a series of contiguous 10 x 10 m (100 m2) quadrats were established between 1992 and 1994 at seven study sites in the mountains of southwestern Virginia and eastern central West Virginia. All of the study sites occurred in areas where a relatively distinct and narrow ecotone existed between a forest...

Abies religiosa habitat prediction in climatic change scenarios and implications for monarch butterfly conservation in Mexico

Treesearch

Cuauhtemoc Saenz-Romero; Gerald E. Rehfeldt; Pierre Duval; Roberto A. Lindig-Cisneros

2012-01-01

Abies religiosa (HBK) Schl. & Cham. (oyamel fir) is distributed in conifer-dominated mountain forests at high altitudes along the Trans-Mexican Volcanic Belt. This fir is the preferred host for overwintering monarch butterfly (Danaus plexippus) migratory populations which habitually congregate within a few stands now located inside a Monarch Butterfly Biosphere...

Environmental assessment: Tenderfoot Creek Experimental Forest Vegetative Treatment Research Project

Treesearch

Gloria E. Flora; Ward McCaughey

1998-01-01

The Tenderfoot Creek Experimental Forest (TCEF) is a 9,125 acre experimental forest located in the western portion of the Little Belt Mountains. The TCEF was established as an experimental forest in 1961 for the development of management techniques for harvesting lodgepole pine while maintaining soil stability. The research emphasis was expanded in 1991 to develop and...

The habitat types

Treesearch

R. Daubenmire; Jean B. Daubenmire

1968-01-01

Nearly everywhere in eastern Washington and northern Idaho as one leaves the steppe at the foot of the mountains and enters the forest, the first coniferous tree encountered is Pinus ponderosa. The ability of this species to endure dry climates· well exceeds that of our next most drouth-tolerant conifer, Pseudotsuga menziesii. Therefore, typically a belt of climax pine...

Molecular phylogeny and historical biogeography of the Anatolian lizard Apathya (Squamata, Lacertidae).

PubMed

Kapli, Paschalia; Botoni, Dimitra; Ilgaz, Cetin; Kumlutaş, Yusuf; Avcı, Aziz; Rastegar-Pouyani, Nasrullah; Fathinia, Behzad; Lymberakis, Petros; Ahmadzadeh, Faraham; Poulakakis, Nikos

2013-03-01

Apathya is a lacertid genus occurring mainly in south-east Turkey and its adjacent regions (part of Iran and Iraq). So far two morphological species have been attributed to the genus; A. cappadocica (with five subspecies, A. c.cappadocica, A. c.muhtari, A. c.schmidtlerorum, A. c. urmiana and A. c.wolteri) and A.yassujica. The first species occupies most of the genus' distribution range, while A. yassujica is endemic of the Zagros Mountains. Here, we explored Apathya's taxonomy and investigated the evolutionary history of the species by employing phylogenetic and phylogeographic approaches and using both mitochondrial (mtDNA) and nuclear markers. The phylogenetic relationships and the genetic distances retrieved, revealed that Apathya is a highly variable genus, which parallels its high morphological variation. Such levels of morphological and genetic differentiation often exceed those between species of other Lacertini genera that are already treated as full species, suggesting the necessity for a taxonomic revision of Apathya. The phylogeographical scenario emerging from the genetic data suggests that the present distribution of the genus was determined by a combination of dispersal and vicariance events between Anatolia and Southwest Asia dating back to the Miocene and continuing up to the Pleistocene. Key geological events for the understanding of the phylogeography of the genus are the movement of the Arabian plate that led to the configuration of Middle East (orogenesis of the mountain ranges of Turkey and Iran) and the formation of Anatolian Diagonal. Copyright © 2012 Elsevier Inc. All rights reserved.

Tropospheric Enhancement of Ozone over the UAE

NASA Astrophysics Data System (ADS)

Abbasi, Naveed Ali; Majeed, Tariq; Iqbal, Mazhar; Kaminski, Jacek; Struzewska, Joanna; Durka, Pawel; Tarasick, David; Davies, Jonathan

2015-04-01

We use the Global Environmental Multiscale - Air Quality (GEM-AQ) model to interpret the vertical profiles of ozone acquired with ozone sounding experiments at the meteorological site located at the Abu Dhabi airport. The purpose of this study is to gain insight into the chemical and dynamical structures in the atmosphere of this unique subtropical location (latitude 24.45N; longitude 54.22E). Ozone observations for years 2012 - 2013 reveal elevated ozone abundances in the range from 70 ppbv to 120 ppbv near 500-400 hPa during summer. The ozone abundances in other seasons are much lower than these values. The preliminary results indicate that summertime enhancement in ozone is associated with the Arabian anticyclones centered over the Zagros Mountains in Iran and the Asir and Hijaz Mountain ranges in Saudi Arabia, and is consistent with TES observations of deuterated water. The model also shows considerable seasonal variation in the tropospheric ozone which is transported from the stratosphere by dynamical processes. The domestic production of ozone in the middle troposphere is estimated and compared GEM-AQ model. It is estimated that about 40-50% of ozone in the UAE is transported from the neighbouring petrochemical industries in the Gulf region. We will present ozone sounding data and GEM-AQ results including a discussion on the high levels of the tropospheric ozone responsible for contaminating the air quality in the UAE. This work is supported by National Research Foundation, UAE.

Improving our understanding of the evolution of mountain belts via the Collisional Orogeny in the Scandinavian Caledonides (COSC) project: Results from seismic investigations and plans for the 2.5 km deep COSC-2 borehole

NASA Astrophysics Data System (ADS)

Juhlin, C.; Almqvist, B. S. G.; Buske, S.; Giese, R.; Hedin, P.; Lorenz, H.

2017-12-01

Mountain belts (orogens) have influenced, and do influence, geological processes and climatic conditions considerably, perhaps more than any other natural phenomenon. The Alpine-Himalayan mountain belt is the prime example of a collisional orogen today. However, research in an active orogen is mostly constrained to observe and interpret the expression of processes at the surface, while the driving processes act at depth, often at mid-crustal levels (20 km) and deeper. About 440 million years ago, an orogen comparable in dimension and tectonic setting to today's Alpine-Himalayan orogen was developing in what is western Scandinavia today. Since then, erosion has removed much of the overburden and exposed the deep interior of the orogen, facilitating direct observation of rocks that are deep in the crust in modern orogens. In the COSC project we study how large rock volumes (allochthons) were transported during the collision of two continents and the associated deformation. The emplacement of high-grade metamorphic allochthons during orogeny has been the focus of COSC-1 research, centered on a 2.5 km deep fully cored borehole drilled in the summer of 2014 through the lower part of the high-grade Seve Nappe Complex near the town of Åre in western Sweden. The planned COSC-2 borehole (also fully cored to 2.5 km) will complement the COSC-1 borehole and allow a 5 km deep tectonostratigraphic column of the Caledonides to be constructed. The rock volume in the proximity of the COSC-2 borehole will be imaged with a combination of very-high and high-resolution geophysical experiments, such as a combination of high frequency seismics; zero offset and walk-away vertical seismic profiling (VSP); and a sparse 3D coverage around the drill site combined with 2D seismic profiles of several kilometers length in different directions. Downhole geophysical logging will provide additional information on the in-situ rock physical properties. Data from surface surveys will be calibrated against and integrated with the borehole data and the geological interpretation of the drill core. The COSC-1 and COSC-2 boreholes will provide a field laboratory for investigating mountain building processes, how plates and rock units deform, what structures and units are formed and their physical properties.

Late Permian rivers draining the uplifted Cape Fold Belt: magnetostratigraphy and detrital thermochronology of Karoo Basin sediments

NASA Astrophysics Data System (ADS)

Tohver, E.; Schmieder, M.; Arosio, R.; Lanci, L.; Jourdan, F.; Wilson, A.; Ratcliffe, K.; Payenberg, T.; Flint, S.

2017-12-01

The Cape Fold Belt and Karoo Basin of southern Africa formed during the Permian orogeny that affected the 13,000 km southern margin of the Gondwanan continent. In this report, we synthesize new and recent magnetostratigraphic and geochronologic data to establish a chronostratigraphic framework for Karoo Basin sedimentation for comparison with the thermal/exhumation history of the Cape Fold Belt. The source-sink model is evaluated using new data from detrital muscovite and zircon from 2 km composite section of fluvial sandstone and mudstones deposited at ca.275 - 260 Ma. Coherent age populations of detrital zircon grains indicate rapid incorporation of contemporary volcanic ashbeds into the sedimentary record. In contrast, cooling age distributions of detrital muscovite are typically ca. 5 - 10 Ma older than the age of deposition; similar lag times are observed from modern sediments in active mountain belts. Trace element geochemical signatures demonstrate a clear shift towards crustal recycling via headland erosion in the Beaufort Group relative to the underlying Ecca Group. These observations pinpoint the age of uplift for the Cape Fold Belt, which began to function as the major sediment source for the foreland Karoo Basin with the deposition of the uppermost Ecca Group and basal Beaufort Group.

Protolith relations of the Gravina belt and Yukon-Tanana terrane in central southeastern Alaska

DOE Office of Scientific and Technical Information (OSTI.GOV)

McClelland, W.C.; Gehrels, G.E.; Patchett, P.J.

1992-01-01

Metamorphic rocks west of the Coast Mountains batholith in central southeastern Alaska are divided into the Gravina belt, Taku terrane, and newly defined Ruth assemblage. The Ruth assemblage comprises metapelite, quartzose metaclastic strata, quartzite, marble, felsic metatuff, mafic metavolcanic rocks, and orthogneiss. Depositional and emplacement ages of 367 {plus minus} 10 Ma and 345 {plus minus} 13 Ma inferred from discordant U/Pb zircon analyses on felsic metatuff and granodioritic orthogneiss, respectively, require that at least portions of the Ruth assemblage be Late Devonian and early Mississippian in age. The assemblage is similar in age and protolith to, and thus correlatedmore » with, the Yukon-Tanana terrane. The Gravina belt is characterized by upper Jurassic and lower Cretaceous mafic volcanic rocks and tuffaceous turbiditic clastic strata that unconformably overlie the Alexander terrane. Metamorphic rocks that structurally underlie the Taku terrane and Rugh assemblage are included in this assemblage. Trace element geochemistry and the abundance of pyroclastic flows associated with tuffaceous turbidites suggest that the Gravina belt evolved in an intra-arc basinal setting. In central southeastern Alaska, the mid-Cretaceous structure that currently separates the Ruth assemblage (Yukon-Tanana correlative) from the Gravina belt marks the fundamental boundary between the Alexander-Wrangellia terrane and inboard Yukon-Tanana and Stikine terranes.« less

The crustal structure from the Altai Mountains to the Altyn Tagh fault, northwest China

USGS Publications Warehouse

Wang, Y.; Mooney, W.D.; Yuan, X.; Coleman, R.G.

2003-01-01

We present a new crustal section across northwest China based on a seismic refraction profile and geologic mapping. The 1100-km-long section crosses the southern margin of the Chinese Altai Mountains, Junggar Accretional Belt and eastern Junggar basin, easternmost Tianshan Mountains, and easternmost Tarim basin. The crustal velocity structure and Poisson's ratio (??), which provide a constraint on crustal composition, were determined from P and S wave data. Despite the complex geology, the crustal thickness along the entire profile is nearly uniform at 50 km. The thickest crust (56 km) occurs at the northern end of the profile beneath the Altai Mountains and the thinnest (46 km) crust is beneath the Junggar basin. Beneath surficial sediments, the crust is found to have three layers with P wave velocities (Vp) of 6.0-6.3, 6.3-6.6, and 6.9-7.0 km/s, respectively. The southern half of the profile, including the eastern Tianshan Mountains and eastern margin of the Tarim basin, shows low P wave velocities and ?? = 0.25 to a depth of 30 km, which suggests a quartz-rich, granitic upper crustal composition. The northern half of the profile below the Altai Mountains and Junggar Accretional Belt has a higher Poisson's ratio of ?? = 0.26-0.27 to a depth of 30 km, indicative of an intermediate crustal composition. The entire 1100-km-long profile is underlain by a 15-30 km thick high velocity (6.9-7.0 km/s; ?? = 0.26-0.28) lower-crustal layer that we interpret to have a bulk composition of mafic granulite. At the southern end of the profile, a 5-km-thick midcrustal low-velocity layer (Vp = 5.9 km/s, ?? = 0.25) underlies the Tianshan and the region to the south, and may be indicative of a near-horizontal detachment interface. Pn velocities are ???7.7-7.8 km/s between the Tianshan and the Junggar basin, and ???7.9-8.0 km/s below the Altai Mountains and eastern margin of the Tarim basin. We interpret the consistent three-layer stratification of the crust to indicate that the crust has undergone partial melting and differentiation after Paleozoic terrane accretion. The thickness (50 km) of the crust appears to be related to compression resulting from the Indo-Asian collision.

The architecture of the porphyry-metal system as a prospecting stratagem in the Southern Rocky Mountains

USGS Publications Warehouse

Neuerburg, George J.

1978-01-01

A model of the porphyry-metal system characteristic of the consanguineous Cretaceous and Tertiary igneous rocks and associated ores of the southern Rocky Mountains is constructed from the bits and pieces exposed in the Colorado mineral belt and the San Juan volcanic field. Hydrothermally altered rocks in a part of the areas of mineralized rock associated with the Platoro caldera are matched against the model, to locate and to characterize latent mineral deposits for optimal prospecting and exploration. The latent deposits are two stockwork molybdenite deposits (porphyry-molybdenum) and one or two copper-gold-silver chimney deposits.

Anomalous concentrations of gold, silver, and other metals in the Mill Canyon area, Cortez quadrangle, Eureka and Lander Counties, Nevada

USGS Publications Warehouse

Elliott, James E.; Wells, John David

1968-01-01

The Mill Canyon area is in the eastern part of the Cortez window of the Roberts Mountains thrust belt in the Cortez quadrangle, north-central Nevada. Gold and silver ores have been mined from fissure veins in Jurassic quartz monzonite and in the bordering Wenban Limestone of Devonian age. Geochemical data show anomalies of gold, silver, lead, zinc, copper, arsenic, antimony, mercury, and tellurium. Geologic and geochemical studies indicate that a formation favorable for gold deposition, the Roberts Mountains Limestone of Silurian age, may be found at depth near the mouth of Mill Canyon.

Zagros Mountains, Iran, SRTM Shaded Relief

NASA Technical Reports Server (NTRS)

2004-01-01

The Zagros Mountains in Iran offer a visually stunning topographic display of geologic structure in layered sedimentary rocks. This scene is nearly 100 kilometers (62 miles) wide but is only a small part of similar terrain that covers much of southern Iran. This area is actively undergoing crustal shortening, as global tectonics moves Arabia toward Asia. Consequently, layers of sedimentary rock are folding much like a carpet will fold if pushed. The convex upward folds create structures called anticlines, which are prominently seen here. The convex downward folds (between the anticlines) create structures called synclines, which are mostly buried and hidden by sediments eroding off the anticlines. Layers having differing erosional resistance create distinctive patterns, often sawtooth triangular facets, that encircle the anticlines. Local relief between the higher mountain ridges and their intervening valleys is about 1200 meters (about 4000 feet).

Salt extrusions and salt 'glaciers' are another set of geologic features readily evident in the topography. Salt deposits, likely created by the evaporation of an ancient inland sea, were buried by the sediments that now make up the layers of the anticlines and synclines. But salt is less dense than most other rocks, so it tends to migrate upward through Earth's crust in vertical columns called 'diapirs'. The compressive folding process has probably facilitated the formation of these diapirs, and the diapirs, in turn, are probably enhancing some anticlines by 'inflating' them with salt. Where the diapirs reach the surface, the salt extrudes, much like lava from a volcano, and the salt flows. Two prominent salt flows are evident in the same valley, leaking from neighboring anticlines, just north of the scene center.

This shaded relief image was created directly from an SRTM elevation model by computing topographic slope in the north-south direction. Northern slopes appear bright and southern slopes appear dark.

Elevation data used in this image were acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Geospatial-Intelligence Agency (NGA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C.

Size: 98.1 kilometers (60.8 miles) by 148.1 kilometers (91.8 miles) Location: 27.3 degrees North latitude, 54.5 degrees East longitude Orientation: North toward the top Image Data: Shaded SRTM elevation model Date Acquired: February 2000

Geomorphic evidence of Quaternary tectonics within an underlap fault zone of southern Apennines, Italy

NASA Astrophysics Data System (ADS)

Giano, Salvatore Ivo; Pescatore, Eva; Agosta, Fabrizio; Prosser, Giacomo

2018-02-01

A composite seismic source, the Irpinia - Agri Valley Fault zone, located in the axial sector of the fold-and-thrust belt of southern Apennines, Italy, is investigated. This composite source is made up of a series of nearly parallel, NW-striking normal fault segments which caused many historical earthquakes. Two of these fault segments, known as the San Gregorio Magno and Pergola-Melandro, and the fault-related mountain fronts, form a wedge-shaped, right-stepping, underlap fault zone. This work is aimed at documenting tectonic geomorphology and geology of this underlap fault zone. The goal is to decipher the evidence of surface topographic interaction between two bounding fault segments and their related mountain fronts. In particular, computation of geomorphic indices such as mountain front sinuosity (Smf), water divide sinuosity (Swd), asymmetry factor (AF), drainage basin elongation (Bs), relief ratio (Rh), Hypsometry (HI), normalized steepness (Ksn), and concavity (θ) is integrated with geomorphological analysis, the geological mapping, and structural analysis in order to assess the recent activity of the fault scarp sets recognized within the underlap zone. Results are consistent with the NW-striking faults as those showing the most recent tectonic activity, as also suggested by presence of related slope deposits younger than 38 ka. The results of this work therefore show how the integration of a multidisciplinary approach that combines geomorphology, morphometry, and structural analyses may be key to solving tectonic geomorphology issues in a complex, fold-and-thrust belt configuration.

Rocky Mountain evolution: Tying Continental Dynamics of the Rocky Mountains and Deep Probe seismic experiments with receiver functions

USGS Publications Warehouse

Rumpfhuber, E.-M.; Keller, Gordon R.; Sandvol, E.; Velasco, A.A.; Wilson, D.C.

2009-01-01

In this study, we have determined the crustal structure using three different receiver function methods using data collected from the northern transect of the Continental Dynamics of the Rocky Mountains (CD-ROM) experiment. The resulting migrated image and crustal thickness determinations confirm and refine prior crustal thickness measurements based on the CD-ROM and Deep Probe experiment data sets. The new results show a very distinct and thick lower crustal layer beneath the Archean Wyoming province. In addition, we are able to show its termination at 42??N latitude, which provides a seismic tie between the CD-ROM and Deep Probe seismic experiments and thus completes a continuous north-south transect extending from New Mexico into Alberta, Canada. This new tie is particularly important because it occurs close to a major tectonic boundary, the Cheyenne belt, between an Archean craton and a Proterozoic terrane. We used two different stacking techniques, based on a similar concept but using two different ways to estimate uncertainties. Furthermore, we used receiver function migration and common conversion point (CCP) stacking techniques. The combined interpretation of all our results shows (1) crustal thinning in southern Wyoming, (2) strong northward crustal thickening beginning in central Wyoming, (3) the presence of an unusually thick and high-velocity lower crust beneath the Wyoming province, and (4) the abrupt termination of this lower crustal layer north of the Cheyenne belt at 42??N latitude. Copyright 2009 by the American Geophysical Union.

Understanding continental megathrust earthquake potential through geological mountain building processes: an example in Nepal Himalaya

NASA Astrophysics Data System (ADS)

Zhang, Huai; Zhang, Zhen; Wang, Liangshu; Leroy, Yves; shi, Yaolin

2017-04-01

How to reconcile continent megathrust earthquake characteristics, for instances, mapping the large-great earthquake sequences into geological mountain building process, as well as partitioning the seismic-aseismic slips, is fundamental and unclear. Here, we scope these issues by focusing a typical continental collisional belt, the great Nepal Himalaya. We first prove that refined Nepal Himalaya thrusting sequences, with accurately defining of large earthquake cycle scale, provide new geodynamical hints on long-term earthquake potential in association with, either seismic-aseismic slip partition up to the interpretation of the binary interseismic coupling pattern on the Main Himalayan Thrust (MHT), or the large-great earthquake classification via seismic cycle patterns on MHT. Subsequently, sequential limit analysis is adopted to retrieve the detailed thrusting sequences of Nepal Himalaya mountain wedge. Our model results exhibit apparent thrusting concentration phenomenon with four thrusting clusters, entitled as thrusting 'families', to facilitate the development of sub-structural regions respectively. Within the hinterland thrusting family, the total aseismic shortening and the corresponding spatio-temporal release pattern are revealed by mapping projection. Whereas, in the other three families, mapping projection delivers long-term large (M<8)-great (M>8) earthquake recurrence information, including total lifespans, frequencies and large-great earthquake alternation information by identifying rupture distances along the MHT. In addition, this partition has universality in continental-continental collisional orogenic belt with identified interseismic coupling pattern, while not applicable in continental-oceanic megathrust context.

Basin-mountain structures and hydrocarbon exploration potential of west Junggar orogen in China

NASA Astrophysics Data System (ADS)

Wu, Xiaozhi; He, Dengfa; Qi, Xuefeng

2016-04-01

Situated in northern Xinjiang, China, in NE-SW trend, West Junggar Orogen is adjacent to Altai fold belt on the north with the Ertix Fault as the boundary, North Tianshan fold belt on the south with the Ebinur Lake Strike-slip Fault as the boundary, and the Junggar Basin on the southeast with Zaire-Genghis Khan-Hala'alat fold belt as the boundary. Covering an area of about 10×104 km2 in China, there are medium and small intermontane basins, Burqin-Fuhai, Tacheng, Hefeng and Hoxtolgay, distributing inside the orogen. Tectonically West Junggar Orogen lies in the middle section of the Palaeo-Asian tectonic domain where the Siberia, Kazakhstan and Tarim Plates converge, and is the only orogen trending NE-SW in the Palaeo-Asian tectonic domain. Since the Paleozoic, the orogen experienced pre-Permian plate tectonic evolution and post-Permian intra-plate basin evolution. Complex tectonic evolution and multi-stage structural superimposition not only give rise to long term controversial over the basin basement property but also complex basin-mountain coupling relations, structures and basin superimposition modes. According to analysis of several kinds of geological and geophysical data, the orogen was dominated by compressive folding and thrust napping from the Siberia plate in the north since the Late Paleozoic. Compressive stress weakened from north to south, corresponding to subdued vertical movement and enhanced horizontal movement of crustal surface from north to south, and finally faded in the overthrust-nappe belt at the northwest margin of the Junggar Basin. The variation in compressive stress is consistent with the surface relief of the orogen, which is high in the north and low in the south. There are two kinds of basin-mountain coupling relationships, i.e. high angle thrusting and overthrusting and napping, and two kinds of basin superimposition modes, i.e. inherited and progressive, and migrating and convulsionary modes. West Junggar orogen has rich oil and gas shows, and oil and gas fields have also been discovered in the Zaysan Basin in adjacent Kazakhstan and in adjacent Junggar, Tuha and Santanghu Basins. Drilling data, geochemical analysis of outcrop data, and the disection of ancient Bulongguoer oil reservoir at the south margin of the Hefeng Basin show there developed two sets of good transitional source rocks, the lower Hujierste Formation in the Middle Devonian (D2h1) and the Hebukehe Formation in the Upper Devonian and Lower Carboniferous (D3-C1h) in this area, which, 10 to 300 m thick, mainly distribute in the shoal water zone along Tacheng-Ertai Late Paleozoic island arc belt. Reservoirs were mainly formed in the Jurassic and then adjusted in two periods, one from the end of the Jurassic to middle Cretaceous and the other in early Paleogene. Those early oil reservoirs might be destroyed in areas such as Bulongguoer with poor preservation conditions, but in an area with good geologic and preserving conditions, oil and gas might accumulate again to form new reservoirs. Therefore, a potential Middle Devonian-Lower Carboniferous petroleum system may exist in Tacheng-Ertai island arc belt, which may become a new domain for exploration, north faulted fold belt in the Heshituoluogai basin, and Hongyan fault bench zone in north Ulungur Depression in the Junggar Basin are promising areas for hydrocarbon exploration.

The emergence of Y-chromosome haplogroup J1e among Arabic-speaking populations

PubMed Central

Chiaroni, Jacques; King, Roy J; Myres, Natalie M; Henn, Brenna M; Ducourneau, Axel; Mitchell, Michael J; Boetsch, Gilles; Sheikha, Issa; Lin, Alice A; Nik-Ahd, Mahnoosh; Ahmad, Jabeen; Lattanzi, Francesca; Herrera, Rene J; Ibrahim, Muntaser E; Brody, Aaron; Semino, Ornella; Kivisild, Toomas; Underhill, Peter A

2010-01-01

Haplogroup J1 is a prevalent Y-chromosome lineage within the Near East. We report the frequency and YSTR diversity data for its major sub-clade (J1e). The overall expansion time estimated from 453 chromosomes is 10 000 years. Moreover, the previously described J1 (DYS388=13) chromosomes, frequently found in the Caucasus and eastern Anatolian populations, were ancestral to J1e and displayed an expansion time of 9000 years. For J1e, the Zagros/Taurus mountain region displays the highest haplotype diversity, although the J1e frequency increases toward the peripheral Arabian Peninsula. The southerly pattern of decreasing expansion time estimates is consistent with the serial drift and founder effect processes. The first such migration is predicted to have occurred at the onset of the Neolithic, and accordingly J1e parallels the establishment of rain-fed agriculture and semi-nomadic herders throughout the Fertile Crescent. Subsequently, J1e lineages might have been involved in episodes of the expansion of pastoralists into arid habitats coinciding with the spread of Arabic and other Semitic-speaking populations. PMID:19826455

The Oligocene carbonate platform of the Zagros Basin, SW Iran: An assessment of highly-complex geological heritage

NASA Astrophysics Data System (ADS)

Habibi, Tahereh; Ruban, Dmitry A.

2017-05-01

North Africa and the Middle East possess rich geological heritage, but the latter is yet to be fully identified and described. The Oligocene carbonate platform of the Zagros Basin in southwest Iran, which corresponds to the lower part of the Asmari Formation, has significant potential for geoconservation and geotourism. The types of the geological heritage, their value, and the possible geosites have been assessed. The studied deposits are interesting because of lithology (carbonate rocks), fossils (larger foraminifera, other microfossils, diverse marine invertebrates, fish microremains, and trace fossils), biostratigraphical developments, facies (homoclinal carbonate ramp) and signature of global events (glacioeustatic fluctuations), and outstanding hydrocarbon resources. The five main geological heritage types are sedimentary, palaeontological, stratigraphical, palaeogeographical, and economical, from which the palaeontological, palaeogeographical, and economical types are of global rank. The Khollar and Kavar sections in the Fars Province of Iran are recommended as geosites suitable for research, education, and tourism. The high complexity of the geological heritage linked to the Oligocene carbonate platform of the Zagros Basin implies the phenomenon of geodiversity should be understood with regard to the relationships between types and their values.

The Outburst Risk as a Function of the Methane Capacity and Firmness of a Coal Seam

NASA Astrophysics Data System (ADS)

Wierzbicki, Mirosław; Skoczylas, Norbert

2014-12-01

In most coal basins that are currently being exploited, gas and rock outbursts pose a considerable safety threat. The risk of their occurrence is frequently assessed by means of a parameter known as the methane capacity of coal. In a lot of countries, the evaluation of the mechanical properties of coal is conducted by means of another parameter: the firmness of coal. Due to the laboratory investigations and in situ observations carried out by the authors of this paper, it was possible to determine a function space in which the outburst risk can be described as a function of the methane capacity and firmness of a coal seam. This, in turn, made it possible to link the "gas factor" to the "mechanical factor", and thus provide a more comprehensive risk analysis. Wyrzuty gazów i skał stanowią duże zagrożenie w większości obecnie eksploatowanych zagłębi węglowych. Bardzo często wykorzystywanym parametrem oceny stanu zagrożenia wyrzutowego jest zawartość metanu w węglu. W wielu krajach do oceny mechanicznych parametrów węgla wykorzystuje się zwięzłość. Autorzy przeprowadzili badania laboratoryjne polegające na prowokacjach wyrzutów w skali laboratoryjnej. Jako materiał badawczy wykorzystane zostały brykiety węglowe. W trakcie badań wstępnych ustalona została zależność pomiędzy porowatością brykietów, a ich zwięzłością f oraz pomiędzy ciśnieniem nasycania metanem, a wskaźnikiem intensywności desorpcji dP. Pozwoliło to na przygotowywanie eksperymentów o kontrolowanych parametrach gazowych (wskaźnik intensywności desorpcji) oraz wytrzymałościowych (zwięzłość). Opracowana została metoda kontrolowania intensywności prowokacji wyrzutu poprzez określenie tempa spadku ciśnienia gazu przed czołem brykietu. Dzięki temu dla siatki parametrów f-dP możliwe było poszukiwanie minimalnej, skutecznej intensywności prowokacji wyrzutu. Znormalizowana wartość stałej czasowej spadku ciśnienia przed czołem brykietu powodującej skuteczną inicjację wyrzutu uznana została za miarę zagrożenia wyrzutowego dla rozpatrywanych parametrów f-dP. Dysponując wartościami tak określonych miar zagrożenia wyrzutowego dla całej siatki parametrów f-dP można wykreślić przestrzeń zagrożenia wyrzutowego w funkcji rozpatrywanych parametrów. Równoległa faza badań dotyczyła poszukiwania korelacji pomiędzy wskaźnikiem intensywności desorpcji, a zawartością gazu w węglu (metanonośnością Mn) na przykładzie pomiarów wykonanych w pokładzie 412 KWK "Zofiówka". W pokładzie tym zaobserwowano bardzo wyraźną, liniową zależność pomiędzy wskaźnikiem intensywności desorpcji, a metanonośnością. Poznanie funkcyjnej zależności Mn(dP) umożliwiło przedstawienie wyników prac laboratoryjnych jako przestrzeni zagrożenia wyrzutowego w funkcji zwięzłości i metanonośności. Analiza uzyskanej przestrzeni zagrożenia wskazuje na jej zgodność zarówno z intuicją, jak i z kopalnianym doświadczeniem. Dla progowej w polskim górnictwie węglowym wartości zwięzłość (f = 0.3) stan zagrożenia wyrzutowego na poziomie 50% występuje przy Mn około 7 m3CH4/Mgcoaldaf. Aby zagwarantować podobny stan zagrożenia wyrzutowego dla kryterialnej wartości metanonośności na poziomie 8 [m3CH4/Mgcoaldaf] węgiel powinien mieć zwięzłość f powyżej 0.5. Oczywiście wartość izolinii na poziomie 50% jest umowna, a interpretacji powinny podlegać raczej kształty izolinii, niż ich wartości.

Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

NASA Astrophysics Data System (ADS)

Yan, Dan-Ping; Zhou, Mei-Fu; Song, Hong-Lin; Wang, Xin-Wen; Malpas, John

2003-01-01

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia. The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1-21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.

Late Archean greenstone tectonics: Evidence for thermal and thrust-loading lithospheric subsidence from stratigraphic sections in the Slave Province, Canada

NASA Technical Reports Server (NTRS)

Kidd, W. S. F.; Kusky, T. M.; Bradley, D. C.

1988-01-01

How late Archean tectonics could be seen to have operated in the Slave Province is illustrated. Lithospheric thinning and stretching, with the formation of rifted margins (to continental or island arc fragments), and lithospheric flexural loading of the kind familiar in arcs and mountain belts could be discerned.

Aniakchak Crater, Alaska Peninsula

USGS Publications Warehouse

Smith, Walter R.

1925-01-01

The discovery of a gigantic crater northwest of Aniakchak Bay (see fig. 11) closes what had been thought to be a wide gap in the extensive series of volcanoes occurring at irregular intervals for nearly 600 miles along the axial line of the Alaska Peninsula and the Aleutian Islands. In this belt there are more active and recently active volcanoes than in all the rest of North America. Exclusive of those on the west side of Cook Inlet, which, however, belong to the same group, this belt contains at least 42 active or well-preserved volcanoes and about half as many mountains suspected or reported to be volcanoes. The locations of some of these mountains and the hot springs on the Alaska Peninsula and the Aleutian Islands are shown on a map prepared by G. A. Waring. Attention has been called to these volcanoes for nearly two centuries, but a record of their activity since the discovery of Alaska is far from being complete, and an adequate description of them as a group has never been written. Owing to their recent activity or unusual scenic beauty, some of the best known of the group are Mounts Katmai, Bogoslof, and Shishaldin, but there are many other beautiful and interesting cones and craters.

Indentation tectonics in northern Taiwan: insights from field observations and analog models

NASA Astrophysics Data System (ADS)

Lu, Chia-Yu; Lee, Jian-Cheng; Malavieille, Jacques

2017-04-01

In northern Taiwan, contraction, extension, transcurrent shearing, and block rotation are four major tectonic deformation mechanisms involved in the progressive deformation of this arcuate mountain belt. The recent evolution of the orogen is controlled not only by the oblique convergence between the Eurasian plate and the Philippine Sea plate but also by the corner shape of the plate boundary. Based on field observations, analyses, geophysical data (mostly GPS) and results of experimental models, we interpret the curved shape of northern Taiwan as a result of contractional deformation (involving imbricate thrusting and folding, backthrusting and backfolding). The subsequent horizontal and vertical extrusion, combined with increasing transcurrent & rotational deformation (bookshelf-type strike-slip faulting and block rotation) induced transcurrent/ rotational extrusion and extrusion related extensional deformation. A special type of extrusional folds characterizes that complex deformation regime. The tectonics in northern Taiwan reflects a single, regional pattern of deformation. The crescent-shaped mountain belt develops in response to oblique indentation by an asymmetric wedge indenter, retreat of Ryukyu trench and opening of the Okinawa trough. Three sets of analog sandbox models are presented to illustrate the development of tectonic structures and their kinematic evolution

Thin‐ or thick‐skinned faulting in the Yakima fold and thrust belt (WA)? Constraints from kinematic modeling of the saddle mountains anticline

USGS Publications Warehouse

Casale, Gabriele; Pratt, Thomas L.

2015-01-01

The Yakima fold and thrust belt (YFTB) deforms the Columbia River Basalt Group flows of Washington State. The YFTB fault geometries and slip rates are crucial parameters for seismic‐hazard assessments of nearby dams and nuclear facilities, yet there are competing models for the subsurface fault geometry involving shallowly rooted versus deeply rooted fault systems. The YFTB is also thought to be analogous to the evenly spaced wrinkle ridges found on other terrestrial planets. Using seismic reflection data, borehole logs, and surface geologic data, we tested two proposed kinematic end‐member thick‐ and thin‐skinned fault models beneath the Saddle Mountains anticline of the YFTB. Observed subsurface geometry can be produced by 600–800 m of heave along a single listric‐reverse fault or ∼3.5  km of slip along two superposed low‐angle thrust faults. Both models require decollement slip between 7 and 9 km depth, resulting in greater fault areas than sometimes assumed in hazard assessments. Both models require initial slip much earlier than previously thought and may provide insight into the subsurface geometry of analogous comparisons to wrinkle ridges observed on other planets.

Hydrological Dynamics In High Mountain Catchment Areas of Central Norway

NASA Astrophysics Data System (ADS)

Löffler, Jörg; Rößler, Ole

Large-scaled landscape structure is regarded as a mosaic of ecotopes where process dynamics of water and energy fluxes are analysed due to its effects on ecosystem functioning. The investigations have been carried out in the continental most Vågå/Oppland high mountains in central Norway since 1994 (LÖFFLER &WUNDRAM 1999, 2000, 2001). Additionally, comparable investigations started in 2000 dealing with the oceanic high mountain landscapes on same latitudes (LÖFFLER et al. 2001). The theoretical and methodological framework of the project is given by the Landscape-Ecological Complex Analysis (MOSIMANN 1984, 1985) and its variations due to technical and principle methodical challenges in this high mountain landscape (KÖHLER et al. 1994, LÖFFLER 1998). The aim of the project is to characterize high mountain ecosystem structure, functioning and dynamics within small catchment areas, that are chosen in two different altitudinal belts each in the eastern continental and the western oceanic region of central Norway. In the frame of this research project hydrological and meteorological measurements on ground water, percolation and soil moisture dynamics as well as on evaporation, air humidity and air-, surface- and soil-temperatures have been conducted. On the basis of large-scaled landscape-ecological mappings (LÖFFLER 1997) one basic meteorological station and several major data logger run stations have been installed in representative sites of each two catchment areas in the low and mid alpine belts of the investigation regions ( JUNGet al. 1997, LÖFFLER &WUNDRAM 1997). Moreover, spatial differentiations of groundwater level, soil moisture and temperature profiles have been investigated by means of hand held measurements at different times of the day, during different climatic situations and different seasons. Daily and annual air-, surface- and soil-temperature dynamics are demonstrated by means of thermoisopleth-diagrams for different types of ecotopes of the different altitudinal belts. The local differences of temperature dynamics are illustrated in a map as an example of the low alpine altitudinal belt showing a 4-dimensional characterization (in space and time) of high mountain ecosystem functioning. Hydrological aspects derived from those results are presented showing the large- scaled hydrological dynamics of high mountain catchment basins in central Norway. The results of the process analysis of hydrological dynamics in the central Norwegian high mountains are discussed within the frame of investigations on altitudinal changes of mountain ecosystem structure and functioning (LÖFFLER &WUNDRAM [in print]). The poster illustrates the theoretical and methodological conception, methods and techniques, examples from complex data material as well as general outcomes of the project (RÖßLER [in prep.]. JUNG, G., J. LÖFFLER &D. WUNDRAM (1997): Untersuchungen zur Struktur, Funktion und Dynamik mittelnorwegischer Hochgebirgsökosysteme. Forschungsansatz. Oldenburger Geoökologisches Kolloquium 3: 4-36. Oldenburg. KÖHLER, B., J. LÖFFLER &D. WUNDRAM (1994): Probleme der kleinräumigen Geoökovarianz im mittelnorwegischen Gebirge. Norsk geogr. Tidsskr. 48: 99- 111. LÖFFLER, J. (1997): Großmaßstäbige geoökologische Kartierungen in den Höhenstufen des mittelnorwegischen Gebirges. NORDEN 12: 205-228. Bremen. LÖFFLER, J. (1998): Geoökologische Untersuchungen zur Struktur mittelnorwegischer Hochgebirgsökosysteme. Oldenburger Geoökologische Studien 1. Oldenburg. LÖFFLER, J., O.-D. FINCH, J. NAUJOK &R. PAPE (2001): Möglichkeiten der Integration zoologischer Aspekte in die landschaftsökologische Untersuchung von Hochgebirgen. Methodendiskussion am Beispiel ökologischer Prozesssysteme und Biozönosen. Naturschutz u. Landschaftsplanung 33 (11): 351-357. LÖFFLER, J. &D. WUNDRAM (1997): Klimatische Phänomene in mittelnorwegischen Hochgebirgslandschaften und ihre ökosystemare Bedeutung. Oldenburger Geoökologisches Kolloquium 3: 37-86. Oldenburg. LÖFFLER, J. &D. WUNDRAM (1999): Kleinräumige Klimavarianz im mittelnorwegischen Hochgebirgsraum Vågå/Oppland. NORDEN 13: 267 -276. Bremen. LÖFFLER, J. &D. WUNDRAM (2000) : Temperature Dynamics of Ecotopes in small Catchment Areas. In: C. BEIERKUHNLEIN et al. (Hrsg.): Zukunft mitteleuropäischer Kulturlandschaft. Analyse - Planung - Management. Tagungsband mit Kurzfassungen der Beiträge zur 1. Jahrestagung der IALE- Region Deutschland: 76, Nürtingen. LÖFFLER, J. &D. WUNDRAM (2001): Räumliche und zeitliche Differenzierung des Temperaturhaushalts von Hochgebirgsökosystemen. NORDEN 14: 85 -102. Bremen. LÖFFLER, J. &D. WUNDRAM (in print): Geoökologische Untersuchungen zur Prozessdynamik mittelnorwegischer Hochgebirgsökosysteme. Oldenburger Geoökologische Studien 2. Oldenburg. MOSIMANN, T. (1984): Landschaftsökologische Komplexanalyse. Wiesbaden. MOSIMANN, T. (1985): Untersuchungen zur Funktion subarktischer und alpiner Geoökosysteme (Finnmark [Norwegen] und Schweizer Alpen). Physiogeographica 7. Basel. RÖßLER, O. (in prep.): Modelling the Water Balance of Central Norwegian High Mountain Ecosystems. University of Oldenburg.

Crustal and lithospheric structure of the Alborz Mountains (Iran) and surrounding areas from integrated geophysical modeling

NASA Astrophysics Data System (ADS)

Motavallianbaran, S.; Zeyen, H. J.; Brunet, M.; Ardestani, V. E.

2010-12-01

The tectonic evolution of Alborz Mountains (northern Iran) and the South Caspian Basin as well as its transition into the Scythian and Turan platforms are yet an unsolved and debated problem. Using gravity, geoid, topography and surface heat flow data, we have modeled the density and temperature distribution in the lithosphere along three profiles crossing Iran in SW-NE direction from the Arabian foreland in the SW to the South Caspian Basin and the Turan Platform to the NE. We found thin lithosphere (100-120 km) underneath Central Iran, whereas thick lithosphere (up to 260 km), is found underneath Arabia, the South Caspian Basin and the Turan Platform. Crustal thickening is found under the Zagros and Alborz Mountains (up to 58 km) and under the Kopet-Dagh Mountains (48 km), whereas the thin crust under the southern Caspian Sea is interpreted as oceanic crust. Modeling result of Profile I is shown below with the crust in gray scale (darker gray: higher density) and the lithospheric mantle with color-coded temperatures. Since some previous studies argued for the absence of a root under the Alborz, we tested different models to see whether it is possible to explain the data without a root beneath the Alborz and finally we found that it is impossible to fit the calculated data to the measured ones with a geologically reasonable model. Below the South Caspian Sea, the form of the crust-mantle interface and the base of the lithosphere indicate a subduction of the South Caspian block towards the N-NW. Further east, under the Kopet-Dagh, no evidence for active subduction is visible. Based on the temperature distribution, we calculated the vertically integrated rock rigidity along the profiles. It shows that a rheologically very strong South Caspian block is surrounded by weaker continental lithosphere which may explain the rigid-block subduction of the South Caspian block on the one hand and internal deformation of the lithosphere under the Kopet-Dagh on the other hand.

Model of formation of Ishtar Terra, Venus

NASA Astrophysics Data System (ADS)

Ansan, V.; Vergely, P.; Masson, Ph.

1996-08-01

For more than a decade, the radar mapping of Venus' surface has revealed that it results from a complex volcanic and tectonic history, especially in the northern latitudes. Ishtar Terra (0°E-62°E) consists of a high plateau, Lakshmi Planum, surrounded by highlands, Freyja Montes to the north and Maxwell Montes to the east. The latter is the highest relief of Venus, standing more than 10 km in elevation. The high resolution of Magellan radar images (120-300 m) allows us to interpret them in terms of tectonics and propose a model of formation for the central part of Ishtar Terra. The detailed tectonic interpretations are based on detailed structural and geologic cartography. The geologic history of Ishtar Terra resulted from two distinct, opposite tectonic stages with an important, transitional volcanic activity. First, Lakshmi Planum, the oldest part of Ishtar Terra is an extensive and complexly fractured plateau that can be compared to a terrestrial craton. Then the plateau is partially covered by fluid lava flows that may be similar to Deccan traps, in India. Second, after the extensional deformation of Lakshmi Planum and its volcanic activity, Freyja and Maxwell Montes formed by WSW-ENE horizontal crustal shortening. The latter produced a series of NNW-SSE parallel, sinuous, folds and imbricated structures that overlapped Lakshmi Planum westward. So these mountain belts have the same structural characteristics as terrestrial fold-and-thrust belts. These mountain belts also display evidence of a late volcanic stage and a subsequent period of relaxation that created grabens parallel to the highland trend, especially in Maxwell Montes.

Peak Metamorphic Temperature Profile across Eastern Belt Franciscan, Northern California Coast Ranges

NASA Astrophysics Data System (ADS)

Schmidt, W. L.; Platt, J. P.

2017-12-01

Previous work done on metamorphic temperatures across the lawsonite-albite to blueschist facies rocks of the Eastern Belt of the Franciscan accretionary complex has relied on a combination of many methods, and suggests that temperature broadly increases from west to east. The Taliaferro Metamorphic Complex is an exception to this pattern and shows higher pressures, and possibly higher temperatures, than its surroundings. The exact location and nature of the faults separating accreted packets in the Eastern Belt is somewhat controversial. A recently calibrated low-temperature laser Raman geothermometer for use on carbonaceous material provides a uniform method of estimating peak metamorphic temperature across the eastern Franciscan and is here used to identify the position of major tectonic boundaries. Temperatures were obtained from exposures in Thomes Creek, Cottonwood Creek, Grindstone Creek, and the middle fork of the Eel River. Peak T in the South Fork Mountain Schist, the highest grade and easternmost unit in the Franciscan, is 310-375°C, whereas in immediately underlying lawsonite-albite facies rocks below the Log Springs thrust, peak T is 270 - 300°C. The Taliaferro Metamorphic Complex reached a peak temperature of 336°C, whereas the surrounding lawsonite-albite facies rocks yield peak temperatures as low as 232°C. Preliminary temperature profiles clearly allow the major faults bounding the Taliaferro Metamorphic Complex and the South Fork Mountain Schist to be located. Extension of the temperature profile has the potential to reveal further detail within these units and the lower grade rocks surrounding them.

Emsian synorogenic paleogeography of the Maine Applachians

USGS Publications Warehouse

Bradley, D.; Tucker, R.

2002-01-01

The Acadian deformation front in the northern Appalachians of Maine and New Hampshire can now be closely located during the early Emsian (Early Devonian; 408-406 Ma). Tight correlations between paleontologically and isotopically dated rocks are possible only because of a new 408-Ma time scale tie point for the early Emsian. The deformation front lay between a belt of Lower Devonian flysch and molasse that were deposited in an Acadian foreland basin and had not yet been folded and a belt of early Emsian plutons that intruded folded Lower Devonian rocks. This plutonic belt includes the newly dated Ore Mountain gabbro (U/Pb; 406 Ma), which hosts magmatic-sulfide mineralization. Along the deformation front, a 407-Ma pluton that locally truncates Acadian folds (Katahdin) was the feeder to volcanic rocks (Traveler Rhyolite; 406-407 Ma) that are part of the foreland-basin succession involved in these same folds. The Emsian igneous rocks thus define a syncollisional magmatic province that straddled the deformation front. These findings bear on three alternative subduction geometries for the Acadian collision.

The geomorphology and evolution of aeolian landforms within a river valley in a semi-humid environment: A case study from Mainling Valley, Qinghai-Tibet Plateau

NASA Astrophysics Data System (ADS)

Zhou, Na; Zhang, Chun-Lai; Wu, Xiao-Xu; Wang, Xun-ming; Kang, Li-qiang

2014-11-01

This paper systematically analyzes a valley's aeolian landforms in a semi-humid region and presents a model of its contemporary evolution. Mainling Valley of the Yarlung Zangbo River on the Qinghai-Tibet Plateau was chosen as the case study for the analysis of morphometric characteristics and the evolution sequence of aeolian landforms via field data and remote sensing images. The aeolian landforms were primarily composed of aeolian sand belts on river terraces and dunes (sheets) on hillside slopes. Three types of aeolian sand belts were identified based on their dune types. In type I belts, an erosive air stream combined with relatively high vegetation cover (10%) produced sparsely distributed parabolic dunes with a high variability of dune heights; in type II belts, the continual reworking by the erosive air stream in combination with low vegetation cover (3%) formed more densely distributed barchans and transitional dunes with a moderate variability of dune heights; and in type III belts, the gradual evolution from an erosive sand-laden air stream to a saturated sand-laden air stream in combination with low vegetation cover (2%) produced the densest crescentic dunefields but with the least variability in dune heights. Dune sizes increase, dune shapes become uniform, and dune distribution becomes close from type I to III belts. Lateral linking and merging of the dunes were also observed within the belts. Together this evidence indicates that an evolution sequence may exist. Aeolian dunefields in the belt appear to evolve from embryonic parabolic dunefields to adolescent barchan dunefields and, subsequently, to mature compound crescentic dunefields. As the aeolian sand belt evolves into the mature stage, sand accumulations at the foot of the mountain valley can be steps for sand accumulation on valley-side slopes.

Long-term in situ persistence of biodiversity in tropical sky islands revealed by landscape genomics.

PubMed

Mastretta-Yanes, Alicia; Xue, Alexander T; Moreno-Letelier, Alejandra; Jorgensen, Tove H; Alvarez, Nadir; Piñero, Daniel; Emerson, Brent C

2018-01-01

Tropical mountains are areas of high species richness and endemism. Two historical phenomena may have contributed to this: (i) fragmentation and isolation of habitats may have promoted the genetic differentiation of populations and increased the possibility of allopatric divergence and speciation and (ii) the mountain areas may have allowed long-term population persistence during global climate fluctuations. These two phenomena have been studied using either species occurrence data or estimating species divergence times. However, only few studies have used intraspecific genetic data to analyse the mechanisms by which endemism may emerge at the microevolutionary scale. Here, we use landscape analysis of genomic SNP data sampled from two high-elevation plant species from an archipelago of tropical sky islands (the Trans-Mexican Volcanic Belt) to test for population genetic differentiation, synchronous demographic changes and habitat persistence. We show that genetic differentiation can be explained by the degree of glacial habitat connectivity among mountains and that mountains have facilitated the persistence of populations throughout glacial/interglacial cycles. Our results support the ongoing role of tropical mountains as cradles for biodiversity by uncovering cryptic differentiation and limits to gene flow. © 2017 John Wiley & Sons Ltd.

The South China - Indochina collision: a perspective from sedimentary basins analysis

NASA Astrophysics Data System (ADS)

Rossignol, Camille; Bourquin, Sylvie; Hallot, Erwan; Poujol, Marc; Roger, Françoise; Dabard, Marie-Pierre; Martini, Rossana; Villeneuve, Michel; Cornée, Jean-Jacques; Peyrotty, Giovan

2017-04-01

Sedimentary basins, through the sedimentary successions and the nature of the deposits, reflect the geology of the area from which the sediments were derived and thus provide valuable record of hinterland tectonism. As the collision between the South China and the Indochina blocks (i.e., the Indosinian orogeny) is still the object of a number of controversies regarding, for instance, its timing and the polarity of the subduction, the sedimentary basins associated with this mountain belt are likely to provide clues to reconstruct its geodynamic evolution. However, both the Sam Nua Basin (located to the south of the inner zones of the Indosinian orogeny and the Song Ma ophiolites) and the Song Da Basin (located to the north of the inner zones), northern Vietnam, are still lacking important information regarding the depositional environments and the ages of the main formations that they contain. Using sedimentological and dating analyses (foraminifers biostratigraphy and U-Pb dating on detrital zircon), we provide a new stratigraphic framework for these basins and propose a geodynamic evolution of the present-day northern Vietnam. During the Early Triassic, the Sam Nua Basin was mainly supplied by volcaniclastic sediments originating from an active volcanic activity. Geochemical investigations, combined with sedimentological and structural analyses, support an arc-related setting for this magmatism. This magmatic arc resulted from the subduction of a south dipping oceanic slab that once separated the South China from the Indochina blocks. During the Middle to the Late Triassic, the Sam Nua Basin underwent erosion that lead to the formation of a major unconformity, termed the Indosinian unconformity. This unconformity is interpreted to result from the erosion of the Indosinian mountain belt, built after the continental collision between the South China and the Indochina blocks. Later, during the Late Triassic, the Sam Nua Basin experienced the deposition of very coarse material, emplaced under continental setting and representing the product of the erosion of the Indosinian mountain belt. To the North, the Song Da Basin is characterized by strongly diachronous deposits over a basal unconformity developed at the expense of volcanic and volcaniclastic deposits related to the Emeishan Large Igneous Province. The sedimentary succession indicates a foreland setting during the Early to the Middle Triassic, which contrasts with the commonly assumed rift setting for these sediments. Thus, the Song Da Basin documents the formation of the Indosinian thrust belt, located immediately to the South of the basin.

New Mexico structural zone - An analogue of the Colorado mineral belt

USGS Publications Warehouse

Sims, P.K.; Stein, H.J.; Finn, C.A.

2002-01-01

Updated aeromagnetic maps of New Mexico together with current knowledge of the basement geology in the northern part of the state (Sangre de Cristo and Sandia-Manzano Mountains)-where basement rocks were exposed in Precambrian-cored uplifts-indicate that the northeast-trending Proterozoic shear zones that controlled localization of ore deposits in the Colorado mineral belt extend laterally into New Mexico. The shear zones in New Mexico coincide spatially with known epigenetic precious- and base-metal ore deposits; thus, the mineralized belts in the two states share a common inherited basement tectonic setting. Reactivation of the basement structures in Late Cretaceous-Eocene and Mid-Tertiary times provided zones of weakness for emplacement of magmas and conduits for ore-forming solutions. Ore deposits in the Colorado mineral belt are of both Late Cretaceous-Eocene and Mid-Tertiary age; those in New Mexico are predominantly Mid-Tertiary in age, but include Late Cretaceous porphyry-copper deposits in southwestern New Mexico. The mineralized belt in New Mexico, named the New Mexico structural zone, is 250-km wide. The northwest boundary is the Jemez subzone (or the approximately equivalent Globe belt), and the southeastern boundary was approximately marked by the Santa Rita belt. Three groups (subzones) of mineral deposits characterize the structural zone: (1) Mid-Tertiary porphyry molybdenite and alkaline-precious-metal deposits, in the northeast segment of the Jemez zone; (2) Mid-Tertiary epithermal precious-metal deposits in the Tijeras (intermediate) zone; and (3) Late Cretaceous porphyry-copper deposits in the Santa Rita zone. The structural zone was inferred to extend from New Mexico into adjacent Arizona. The structural zone provides favorable sites for exploration, particularly those parts of the Jemez subzone covered by Neogene volcanic and sedimentary rocks. ?? 2002 Published by Elsevier Science B.V.

40Ar/39Ar dates from alkaline intrusions of the northern Crazy Mountains, south-central Montana

NASA Astrophysics Data System (ADS)

Harlan, S. S.

2005-05-01

The Crazy Mountains basin of south-central Montana is a complex foreland basin that formed during the interaction of thin-skinned, decollement-style folds of the Montana thrust belt and the basement-involved folds and thrust faults of the Rocky Mountain foreland province. Near the depositional center of the basin, synorogenic strata of the Paleocene Fort Union Formation have been intruded and locally thermally metamorphosed by strongly alkaline to subalkaline Tertiary intrusive rocks. The subalkaline rocks are found mostly in the southern Crazy Mountains and form stocks (Big Timber stock, Loco Mountain stock), radiating dikes and sills. With the exception of the Ibex Mountain sill (?), the alkaline rocks are restricted to the northern Crazy Mountains. New 40Ar/39Ar dates are reported from the strongly alkaline rocks, including the Comb Creek stock and dike swarm, the Ibex Mountain sill(?), and sills from the Robinson anticline intrusive complex. The alkaline rocks of the Robinson anticline intrusive complex are exposed in the easternmost folds of the Cordilleran fold and thrust belt, but despite their arcuate and apparently folded map geometry they have been shown to post-date folding. Hornblende from a trachyte sill in the Robinson anticline intrusive complex yielded a relatively simple age spectrum with a weighted mean of 50.61 ± 0.14 Ma (2σ), which probably records the age of sill emplacement. Nepheline syenite and mafic nepheline syenites of the Comb Creek stock and a dike from its radial dike swarm, two sills from the Robinson antlicline intrusive complex, and the Ibex Mountains sill(?) gave biotite plateau dates ranging from 50.03 to 50.22 Ma, with 2σ errors of ± 0.11 to 0.19 Ma. Because these dates are from fairly small, hypabyssal intrusions, they must have cooled quickly and thus these dates closely approximate the emplacement age of the intrusions. These data indicate that the strongly alkaline intrusions were emplaced during a fairly restricted interval of time at about 50.1 Ma. The dates from the alkaline rocks are somewhat older than dates from the subalkaline Big Timber stock in the southern Crazy Mountains, which gave biotite 40Ar/39Ar dates of about 49.3 Ma (du Bray and Harlan, 1996). However, because these dates represent cooling through closure temperatures of about 350° C, they are minimum estimates for the age of the stock. The limited span of 40Ar/39Ar dates between the alkaline and subalkaline rocks of the Crazy Mountains intrusions (i.e., 50.6 to 49.2 Ma) indicates that the magmas represented by these different geochemical groups were closely associated in both time and space, with emplacement occurring in as little as 1.5 Ma. On a regional scale, the 49-51 Ma age is similar to that of most of the igneous centers of the Central Montana alkalic province and is coeval with the peak of widespread volcanism in the Absaroka-Gallatin volcanic field immediately to the south of the Crazy Mountains Basin.

Variation in crustal structure in Iran and the surrounding region

NASA Astrophysics Data System (ADS)

Rham, D.; Tatar, M.; Ashtiany, M.; Mokhtari, M.; Priestley, K.; Paul, A.

2007-12-01

We present a model for the topography of the Moho discontinuity for Iran and its surrounding regions. This is produced using data from field deployments within Iran by the University of Cambridge (UK) and the Universite Joseph-Fourier (FRA) in conjunction with International Institute of Earthquake Engineering and Seismology (Iran), in addition to data from IRIS and Geofone. We determine tomographic group velocity maps for periods between 10 and 60 s from multiple filter analysis of ~5500 seismograms. Because of the dense path coverage, these images have substantially higher lateral resolution for this region than is currently available from global and regional group velocity studies. Joint inversion of receiver functions and Rayleigh wave dispersion give accurate crustal velocity structures at 96 sites within Iran These provide a constraint for the less sharp crustal velocity profile produced by inverting the Rayleigh wave dispersion curve across all of Iran. We observe variations in the crustal thickness across the region, consistent with the surface topography. The thickest crust (55-60 km) is found beneath the central Zagros mountains, with the crust in the remainder of Iran having a thicknesses of 40-50 km. No significant increase in Moho depth is seen beneath the Alborz or Kopet Dagh mountains. The structure of the South Caspian Basin is presented with a different structure to that found in previous studies, with a crustal thickness of 50 km in the west, and beneath the Caucasus and Talesh mountains, in the middle part of the basin, over the course of the ~100km, this decreases to 40km, and continues to 35 km beneath the Turkmen Platform. Comparisons are also made between the joint inversion results, and accurate hypocentre depths for regional earthquakes. This shows most events occur in the upper crystalline crust (~10-20km depth), with few in the lowest velocity layer. Almost no events are located in the lower crust, and only in the Makran and Aspheron- Balkhan Sill do earthquakes appear in the Upper Mantle.

Shortening and Thickening of Metropolitan Los Angeles Measured and Inferred Using Geodesy

NASA Technical Reports Server (NTRS)

Argus, D.; Heflin, M.; Donnellan, A.; Webb, F.; Dong, D.; Hurst, K.; Jefferson, D.; Lyzenga, G.; Watkins, M.; Zumberge, J.

1999-01-01

Geodetic measurements using the Global Positioning System and other techniques show north-south shortening near Los Angeles to be fastest across the northern part of the metropolitan area, where an ESE-striking, 5- to 40-km-wide belt lying to the south of San Gabriel Mountains and to the north of downtown and West Los Angeles is shortening at 5 mm/yr.

Partitioning hydrologic contributions to an 'old-growth' riparian area in the Huron Mountains of Michigan, USA

Treesearch

Randall K. Kolka; Christian P. Giardina; Jason D. McClure; Alex Mayer; Martin F. Jurgensen

2010-01-01

Over the past century, annual snowfall has increased across the ¡®snow-belt¡¯ region of the Upper Peninsula of Michigan, yet total annual precipitation has not changed, with potential impacts on hydrological processes and ecosystem composition. Using an integrated hydrochemical approach, we characterized groundwater discharge and quantified the contribution of snow-...

Distribution of adult Cerambycidae and Buprestidae (Coleoptera) in a subalpine forest under shelterwood management

Treesearch

Kevin M. O' Neill; Jessica E. Fultz; Michael A. Ivie

2008-01-01

We examined the distribution of adult Buprestidae and Cerambycidae in the Tenderfoot Creek Experimental Forest in the Little Belt Mountains of central Montana, U.S.A., using pan traps and sweep samples on differnt species of flowering plants. Using several methods during multi-year (2001-2004), summer-long surveys, we documented the presence of adults of three species...

Stone Quarries and Sourcing in the Carolina Slate Belt

DTIC Science & Technology

2006-04-01

a hilltop with a localized outcrop of small boulders of andesite porphyry . A revisit revealed that the site had recently been destroyed by...rocks are dacitic and include flows, tuffs, breccias, and porphyries . Metasedimentary rocks are metamudstone and fine metasandstone. The Uwharrie...Rocks of this zone, from Shingle Trap, Hattaway, and Sugarloaf Mountains, are mainly light to dark gray metadacite porphyry or metadacitic

Tectonic Evolution of Ishtar Terra: Processes of Crustal Shortening and Thickening on Venus.

NASA Astrophysics Data System (ADS)

Vorder Bruegge, Richard Walsh

Evidence for the horizontal movement of large areas of crust, mountain building, and the possible removal of crust through processes similar to those observed on Earth is found in the Ishtar Terra highland region of Venus. Ishtar Terra is 5000 x 1500 km in size, an area comparable to Australia. It is characterized by a 2-5 km high, flat plain, Lakshmi Planum, which is flanked by mountain belts that reach elevations of up to 11 km. Outboard of these mountain belts are complexly deformed 'tessera' regions at elevations of 1 to 6 km. Evidence for the creation of crust through a mechanism comparable to terrestrial seafloor spreading is found in the elevated Trough and Ridge Terrain of Eastern Fortuna Tessera. In addition, the region around the Trough and Ridge Terrain is characterized by an elevated and deformed surface which exhibits a morphology compatible with an origin through crustal shortening through the collision of thick blocks of crust, such as through continental or oceanic plateau collision on Earth. Folds, thrusts, and strike-slip faults, all indicative of crustal shortening, are identified in these regions, and indicate a variety of convergence directions. The collision of very thick crustal blocks also produces high orogenic belts through processes comparable to terrestrial orogenesis. However, some fundamental differences may also exist in orogenesis on the two planets. These differences are primarily related to the driving mechanisms and thermal effects of orogenesis. The surficial geological characteristics of the northern edge of Ishtar Terra have been combined with geophysical modelling and provide evidence that this region is characterized by the wholescale underthrusting of low-lying plains crust beneath the thicker crust of Ishtar Terra. This underthrusting process adds upper crustal material to Ishtar Terra through a suturing process analogous to that of sedimentary accretionary wedges on Earth. The primary conclusion of this work is that crustal shortening and thickening through processes comparable to those observed on Earth have played a dominant role in the formation and evolution of Ishtar Terra.

High Resolution Forecasting System for Mountain area based on KLAPS-WRF

NASA Astrophysics Data System (ADS)

Chun, Ji Min; Rang Kim, Kyu; Lee, Seon-Yong; Kang, Wee Soo; Park, Jong Sun; Yi, Chae Yeon; Choi, Young-jean; Park, Eun Woo; Hong, Soon Sung; Jung, Hyun-Sook

2013-04-01

This paper reviews the results of recent observations and simulations on the thermal belt and cold air drainage, which are outstanding in local climatic phenomena in mountain areas. In a mountain valley, cold air pool and thermal belt were simulated with the Weather and Research Forecast (WRF) model and the Korea Local Analysis and Prediction System (KLAPS) to determine the impacts of planetary boundary layer (PBL) schemes and topography resolution on model performance. Using the KLAPS-WRF models, an information system was developed for 12 hour forecasting of cold air damage in orchard. This system was conducted on a three level nested grid from 1 km to 111 m horizontal resolution. Results of model runs were verified by the data from automated weather stations, which were installed at twelve sites in a valley at Yeonsuri, Yangpyeonggun, Gyeonggido to measure temperature and wind speed and direction during March to May 2012. The potential of the numerical model to simulate these local features was found to be dependent on the planetary boundary layer schemes. Statistical verification results indicate that Mellor-Yamada-Janjic (MYJ) PBL scheme was in good agreement with night time temperature, while the no-PBL scheme produced predictions similar to the day time temperature observation. Although the KLAPS-WRF system underestimates temperature in mountain areas and overestimates wind speed, it produced an accurate description of temperature, with an RMSE of 1.67 ˚C in clear daytime. Wind speed and direction were not forecasted well in precision (RMSE: 5.26 m/s and 10.12 degree). It might have been caused by the measurement uncertainty and spatial variability. Additionally, the performance of KLAPS-WRF was performed to evaluate for different terrain resolution: Topography data were improved from USGS (United States Geological Survey) 30" to NGII (National Geographic Information Institute) 10 m. The simulated results were quantitatively compared to observations and there was a significant improvement (RMSE: 2.06 ˚C -> 1.73 ˚C) in the temperature prediction in the study area. The results will provide useful guidance of grid size selection on high resolution simulation over the mountain regions in Korea.

Small-scale topography modulates elevational α-, β- and γ-diversity of Andean leaf beetles.

PubMed

Thormann, Birthe; Ahrens, Dirk; Espinosa, Carlos Iván; Armijos, Diego Marín; Wagner, Thomas; Wägele, Johann W; Peters, Marcell K

2018-05-01

Elevational diversity gradients are typically studied without considering the complex small-scale topography of large mountains, which generates habitats of strongly different environmental conditions within the same elevational zones. Here we analyzed the importance of small-scale topography for elevational diversity patterns of hyperdiverse tropical leaf beetles (Coleoptera: Chrysomelidae). We compared patterns of elevational diversity and species composition of beetles in two types of forests (on mountain ridges and in valleys) and analyzed whether differences in the rate of species turnover among forest habitats lead to shifts in patterns of elevational diversity when scaling up from the local study site to the elevational belt level. We sampled beetle assemblages at 36 sites in the Podocarpus National Park, Ecuador, which were equally distributed over two forest habitats and three elevational levels. DNA barcoding and Poisson tree processes modelling were used to delimitate putative species. On average, local leaf beetle diversity showed a clear hump-shaped pattern. However, only diversity in forests on mountain ridges peaked at mid-elevation, while beetle diversity in valleys was similarly high at low- and mid-elevation and only declined at highest elevations. A higher turnover of species assemblages at lower than at mid-elevations caused a shift from a hump-shaped diversity pattern found at the local level to a low-elevation plateau pattern (with similar species numbers at low and mid-elevation) at the elevational belt level. Our study reveals an important role of small-scale topography and spatial scale for the inference on gradients of elevational species diversity.

The growth of a mountain belt forced by base-level fall: Tectonics and surface processes during the evolution of the Alborz Mountains, N Iran

NASA Astrophysics Data System (ADS)

Ballato, Paolo; Landgraf, Angela; Schildgen, Taylor F.; Stockli, Daniel F.; Fox, Matthew; Ghassemi, Mohammad R.; Kirby, Eric; Strecker, Manfred R.

2015-09-01

The idea that climatically modulated erosion may impact orogenic processes has challenged geoscientists for decades. Although modeling studies and physical calculations have provided a solid theoretical basis supporting this interaction, to date, field-based work has produced inconclusive results. The central-western Alborz Mountains in the northern sectors of the Arabia-Eurasia collision zone constitute a promising area to explore these potential feedbacks. This region is characterized by asymmetric precipitation superimposed on an orogen with a history of spatiotemporal changes in exhumation rates, deformation patterns, and prolonged, km-scale base-level changes. Our analysis suggests that despite the existence of a strong climatic gradient at least since 17.5 Ma, the early orogenic evolution (from ∼36 to 9-6 Ma) was characterized by decoupled orographic precipitation and tectonics. In particular, faster exhumation and sedimentation along the more arid southern orogenic flank point to a north-directed accretionary flux and underthrusting of Central Iran. Conversely, from ∼6 to 3 Ma, erosion rates along the northern orogenic flank became higher than those in the south, where they dropped to minimum values. This change occurred during a ∼3-Myr-long, km-scale base-level lowering event in the Caspian Sea. We speculate that mass redistribution processes along the northern flank of the Alborz and presumably across all mountain belts adjacent to the South Caspian Basin and more stable areas of the Eurasian plate increased the sediment load in the basin and ultimately led to the underthrusting of the Caspian Basin beneath the Alborz Mountains. This underthrusting in turn triggered a new phase of northward orogenic expansion, transformed the wetter northern flank into a new pro-wedge, and led to the establishment of apparent steady-state conditions along the northern orogenic flank (i.e., rock uplift equal to erosion rates). Conversely, the southern mountain front became the retro-wedge and experienced limited tectonic activity. These observations overall raise the possibility that mass-distribution processes during a pronounced erosion phase driven by base-level changes may have contributed to the inferred regional plate-tectonic reorganization of the northern Arabia-Eurasia collision during the last ∼5 Ma.

Geophysical Evidence for the Tectonic Evolution of the Inverted Belt-Purcell Basin, Northwestern Montana

NASA Astrophysics Data System (ADS)

Rutherford, B. S.; Speece, M. A.; Constenius, K. N.

2015-12-01

The geometry of the Precambrian Belt-Purcell basin and subsequent allochthon, that dominates the geology of northwestern Montana, played a critical role in the development of compressional structures during orogenesis and their ensuing reactivation during the later phase of extensional collapse. Five reprocessed seismic reflection profiles provide images in the Swan Range and adjacent valleys that we have correlated to published seismic data north into Canada. Reflections from syndepositional sills encased within Lower Belt rocks offer clues to the configuration of the basin prior to its tectonic inversion. Thick basinal facies of the Lewis salient are contrasted by thin shelfal facies found in hanging wall rocks of frontal Belt carrying thrusts south of the salient. The along strike change in hanging wall rocks reflects the original configuration of the Belt basin margin. Rocks of the Lewis salient were deposited in an embayment on the northeastern margin of the Belt basin. Shelfal accumlations of the embayment comprise an autochthonous wedge that has remained in the footwall of the Lewis thrust system. South of the embayment and related salient, nearly the entire Belt basin was detached from pre-Belt crystalline rocks and inverted at the latitude of the Sawtooth Range. Deeply exhumed Phanerozoic rocks of the Sawtooth Range are a direct consequence of the thin wedge geometry of the detached basin south of the Lewis salient that required growth of a substantial orogenic wedge to obtain critical taper values. We offer an alternate interpretation of a >10 km high, west facing décollement ramp that coincides with the Belt-Purcell basin margin. Previous interpretations in Montana have inferred the location of the basin margin ramp to approximate the trace of the Purcell Anticlinorium. Seismic data and cross-section balancing suggest the Rocky Mountain Trench as a more accurate location. Based on our proposed position of the basin margin the Belt-Purcell allocthon requires insignificant rotation during thrust emplacement which is in agreement with published interpretations of paleomagnetic data. We suggest small (<5°) clockwise rotation is due to an increase in extensional slip from the international border south to the Flathead Valley as opposed to an increase in compressional shortening to the north.The geometry of the Precambrian Belt-Purcell basin and subsequent allochthon, that dominates the geology of northwestern Montana, played a critical role in the development of compressional structures during orogenesis and their ensuing reactivation during the later phase of extensional collapse. Five reprocessed seismic reflection profiles provide images in the Swan Range and adjacent valleys that we have correlated to published seismic data north into Canada. Reflections from syndepositional sills encased within Lower Belt rocks offer clues to the configuration of the basin prior to its tectonic inversion. Thick basinal facies of the Lewis salient are contrasted by thin shelfal facies found in hanging wall rocks of frontal Belt carrying thrusts south of the salient. The along strike change in hanging wall rocks reflects the original configuration of the Belt basin margin. Rocks of the Lewis salient were deposited in an embayment on the northeastern margin of the Belt basin. Shelfal accumlations of the embayment comprise an autochthonous wedge that has remained in the footwall of the Lewis thrust system. South of the embayment and related salient, nearly the entire Belt basin was detached from pre-Belt crystalline rocks and inverted at the latitude of the Sawtooth Range. Deeply exhumed Phanerozoic rocks of the Sawtooth Range are a direct consequence of the thin wedge geometry of the detached basin south of the Lewis salient that required growth of a substantial orogenic wedge to obtain critical taper values. We offer an alternate interpretation of a >10 km high, west facing décollement ramp that coincides with the Belt-Purcell basin margin. Previous interpretations in Montana have inferred the location of the basin margin ramp to approximate the trace of the Purcell Anticlinorium. Seismic data and cross-section balancing suggest the Rocky Mountain Trench as a more accurate location. Based on our proposed position of the basin margin the Belt-Purcell allocthon requires insignificant rotation during thrust emplacement which is in agreement with published interpretations of paleomagnetic data. We suggest small (<5°) clockwise rotation is due to an increase in extensional slip from the international border south to the Flathead Valley as opposed to an increase in compressional shortening to the north.

An introduction to the tectonophysics special issue (Geodynamics and Environment in East Asia, GEEA 2014)

NASA Astrophysics Data System (ADS)

Siame, Lionel L.; Lee, Jian-Cheng

2016-12-01

In Taiwan, tectonic and climatic processes are exacerbated, involving deformation and erosion rates that are among the highest ones in the world. The combination of these internal and external forcing factors results in frequent and severe natural hazards in many aspects, including earthquake, landslide, mud/debris flows, floods, tsunamis, etc., which became a real concern not only for in the Taiwanese society but also applying for many countries or areas in the world. Within this general context, Taiwan orogen is thus a quite exceptional natural laboratory to study the coupling relationships between internal and external processes, and thus better cope with implications on society and economics. From a fundamental science point of view, Taiwan orogen has long been recognized as one of the best places in the world to study mountain building processes including lithosphere and crustal deformation, mechanisms of mountain building, seismic cycle and seismic behaviour of active faults. In fact, Taiwan orogen is probably one of the rare mountain belts where processes of mountain building can be apprehended from oceanic to continental subduction and post-orogenic extension.

Preliminary report on uranium and thorium content of intrusive rocks in northeastern Washington and northern Idaho

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castor, S.B.; Berry, M.R.; Robins, J.W.

1977-11-01

This study delineates favorable areas for uranium resources in northeastern Washington and northern Idaho by identifying granitic rocks with relatively large amounts of uranium and (or) thorium. Results are based on analysis of 344 rock samples. Uranium analyses obtained by gamma-ray spectrometric data correlate closely with fluorometric determinations. On the basis of cumulative frequency distribution curves, more than 8 ppM equivalent uranium and more than 20 ppM equivalent thorium are considered anomalous for granitic rocks in northeastern Washington and northern Idaho. Granitic rocks anomalously high in uranium and (or) thorium are concentrated in two northeast-trending belts. The most prominent, themore » Midnite-Hall Mountain belt, includes the Midnite and Sherwood uranium mines, and two lesser but productive areas farther north. This belt follows the contact between Precambrian and Paleozoic rocks, which is also the locus of the Kootenai arc fold belt. The second belt of anomalously radioactive granitic rocks is along the Republic graben, a prominent linear structure in an area with no recorded uranium production. Anomalously radioactive granitic rocks are generally massive quartz monzonite, alaskite, or pegmatite, which contain abundant quartz and potash feldspar. They are also characterized by pink potash feldspar, commonly as large phenocrysts, and by the presence of muscovite. Several uranium and thorium minerals have been identified in these rocks. The two belts of anomalously radioactive plutons are considered favorable for uranium resources. Deposits could occur in the intrusive rocks themselves or in favorable environments in adjacent rocks. 13 figs., 2 tables.« less

Tectono-sedimentary evolution of the Permian-Triassic extension event in the Zagros basin (Iran): results from analogue modelling

NASA Astrophysics Data System (ADS)

Madani-kivi, M.; Zulauf, G.

2015-12-01

Since the 1970s, the largest oil and gas reservoirs have been discovered in the Permian-Early Triassic formationsin Saudi Arabia. Thus, this time period is important for the discovery of new oil reserves in Iran. The Arabian passivecontinental margin has undergone lithospheric extension during the Permian-Triassic, which led to the formation of theNeo-Tethys. The aim of this paper is to describe the development of the continental rift basin in the Zagros region basedon the tectono-sedimentological evolution. We have studied well-log data to specify the distribution of synrift depositsin the Zagros and have related this information to the modelling. Environmental changes indicated by various sedimentarysequences, from a siliciclastic basin to a carbonate platform setting, are described. The Cambrian Hormuz salt, whichoverlies the metamorphosed Precambrian basement, becomes effective as a basal detachment layer influencing the styleof overburden deformation during the Permian-Triassic extension event. We have investigated the formation of variousstructures linked to the presence or absence of the Hormuz layer by analogue modelling and relating these structures to theLate Palaeozoic sedimentation. Based on results of the analogue modelling, we argue that the basal detachment layer (Hormuzseries) has contributed to the various structural styles of the extensional basin development in the Fars domain and theLorestan domain.

Comparisons of Lower Cambrian ( ) Chilhowee Group siliciclastics of the frontal Blue Ridge with possible equivalents in the central Blue Ridge and basement massifs in the southern Appalachians

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aylor, J.G. Jr.; Tull, J.F.

1993-03-01

The Lower Cambrian Chilhowee Group (CG) along the Blue Ridge (BR) foreland boundary may also be represented in more internal parts of the orogen. The relative palinspastic positions of these more internal CG( ) sequences are poorly constrained, but they are believed to represent more outboard facies than those along the frontal BR. Although correlation with CG rocks of the frontal BR is indefinite due to metamorphism and polydeformation, correlative sequences may include the cover of the Corbin and Salem Church gneisses (Pinelog Fm.), Grandfather Mountain window, Murphy belt (MB) (Hiwassee River Group), Tallulah and Toxaway domes (TTD) (quartzite-schist membermore » of the Tallulah Falls Fm.), Pine Mountain window (Hollis Quartzite), and Sauratown Mountains window (Hogan Creek and Sauratown Fms.). The CG is generally bounded on the west by the Great Smoky fault. Siliciclastics of the CG represent stacked, coarsening upward sequences, separated by transgressive facies, and capped by a highstand of the Shady Dolomite or its equivalents. CG correlations in the Kahatchee Mountain Group of the Talladega belt and the siliciclastics in the Hiwassee River Group of the MB are supported by fossil constraints. Other units are correlated with CG based upon intimate associations with marble believed to be equivalent to the overlying Lower Cambrian Shady Dolomite, or upon presumed uncomformable relationships above Grenville basement. The CG averages about 1,260 meters thickness at the frontal BR, whereas lower siliciclastics in the MB average 1,830 meters. The Pinelog Fm. is up to 600 meters thick. The Hollis Quartzite is approximately 325 meters thick, and the estimated thickness of the quartz-schist member at Tallulah Falls is up to 900 meters. More distal siliciclastics of the central BR in the MB and distal siliciclastics overlying basement were deposited farther out on the shelf as stratigraphic, litho-facies equivalents of shallower marine and continental deposits of the CG.« less

Chronology of Late Cretaceous igneous and hydrothermal events at the Golden Sunlight gold-silver breccia pipe, southwestern Montana

USGS Publications Warehouse

DeWitt, Ed; Foord, Eugene E.; Zartman, Robert E.; Pearson, Robert C.; Foster, Fess

1996-01-01

Gold mineralization at the Golden Sunlight breccia pipe, southwestern Montana, is related to emplacement of Late Cretaceous alkali-calcic rhyolite and subsequent collapse of the Belt Supergroup wallrock and rhyolite in the pipe. The pipe is inferred to grade downward into an alkalic porphyry molybdenum system. The pipe is cut by alkalic to sub-alkalic lamprophyre dikes and sills, which locally contain high-grade gold where emplaced along late shear zones and vein systems. Determination of the emplacement age of the rhyolite is hampered by inherited lead or inherited Late Archean zircon from the source region of the rhyolite. An emplacement age of about 80 Ma for the rhyolite can be inferred if a basement age of 2,600 Ma is assumed. This Late Archean age is in agreement with basement ages determined in many parts of southwestern Montana. A 206 Pb- 238 U whole-rock date of 84 ? 18 Ma from altered and mineralized Belt Supergroup strata and rhyolite in the breccia pipe indicates hydrothermal alteration related to gold mineralization in Late Cretaceous time. Although sericite is a relatively widespread hydrothermal mineral, attempts to date the very fine grained material by the 40 Ar- 39 Ar method did not provide a spectra that could be interpreted unambiguously. A 40 Ar- 39 Ar plateau date of 76.9 ? 0.5 Ma from biotite phenocrysts in the lamprophyre indciates intrusion of mafic magma and attendant CO 2 metasomatism in the Late Cretaceous. Fission-track data from zircon in the rhyolite are permissive of slow uplift of the Belt Supergroup strata, 1U.S. Geological Survey, Box 25046, Denver Federal Center, Denver, CO 80225. 2Golden Sunlight Mines, Inc., 453 MT Highway 2 East, Whitehall, MT 59759. rhyolite, and lamprophyre between 55 and 50 Ma, but the data are not definitive. Rhyolitic welded tuff in the informally named units 7, 9, and 11 of the Elkhorn Mountains Volcanics is most similar in chemistry and age to the rhyolite at the Golden Sunlight mine. Trachybasalt in the Adel Mountains Volcanics and andesitic basalt in the informally named unit 8 of the Elkhorn Mountains Volcanics are the most analogous in chemistry and age to lamprophyres at the mine. The rhyolitic rocks appear to be derived from deep crustal sources, but data for the lamprophyres and mafic rocks in the Elkhorn Mountains Volcanics indicate that they were derived from the mantle.

The ophiolitic North Fork terrane in the Salmon River region, central Klamath Mountains, California

USGS Publications Warehouse

Ando, C.J.; Irwin, W.P.; Jones, D.L.; Saleeby, J.B.

1983-01-01

The North Fork terrane is an assemblage of ophiolitic and other oceanic volcanic and sedimentary rocks that has been internally imbricated and folded. The ophiolitic rocks form a north-trending belt through the central part of the region and consist of a disrupted sequence of homogeneous gabbro, diabase, massive to pillowed basalt, and interleaved tectonitic harzburgite. U-Pb zircon age data on a plagiogranite pod from the gabbroic unit indicate that at least this part of the igneous sequence is late Paleozoic in age.The ophiolitic belt is flanked on either side by mafic volcanic and volcaniclastic rocks, limestone, bedded chert, and argillite. Most of the chert is Triassic, including much of Late Triassic age, but chert with uncertain stratigraphic relations at one locality is Permian. The strata flanking the east side of the ophiolitic belt face eastward, and depositional contacts between units are for the most part preserved. The strata on the west side of the ophiolitic belt are more highly disrupted than those on the east side, contain chert-argillite melange, and have unproven stratigraphic relation to either the ophiolitic rocks or the eastern strata.Rocks of the North Fork terrane do not show widespread evidence of penetrative deformation at elevated temperatures, except an early tectonitic fabric in the harzburgite. Slip-fiber foliation in serpentinite, phacoidal foliation in chert and mafic rocks, scaly foliation in argillite, and mesoscopic folds in bedded chert are consistent with an interpretation of large-scale anti-formal folding of the terrane about a north-south hinge found along the ophiolitic belt, but other structural interpretations are tenable. The age of folding of North Fork rocks is constrained by the involvement of Triassic and younger cherts and crosscutting Late Jurassic plutons. Deformation in the North Fork terrane must have spanned a short period of time because the terrane is bounded structurally above and below by Middle or Late Jurassic thrust faults.The North Fork terrane appears to contain no arc volcanic rocks or arc-derived detritus, suggesting that it neither constituted the base for an arc nor was in a basinal setting adjacent to an arc sediment source. Details of the progressive accretion and evolutionary relationship of the North Fork to other terranes of the Klamath Mountains are not yet clear.

Using P-wave Triplications to Constrain the Mantle Transition Zone beneath Central Iranian Plateau and Surrounding Area

NASA Astrophysics Data System (ADS)

Chi, H. C.; Tseng, T. L.

2014-12-01

The Iranian Plateau is a tectonically complex region resulting from the continental collision between the African and Eurasian plates. The convergence of the two continents created the Zagros Mountains, the high topography southwest of Iran, and active seismicity along the Zagros-Bitlis suture. Tomographic studies in Iran reveal low seismic speeds and high attenuation of Sn wave in the uppermost mantle beneath the Iranian Plateau relative to adjacent regions. The deeper structure, however, remains curiously inconclusive. By contrast, a prominent fast seismic anomaly is found under central Tibet near depth of 600 km in the mantle transition zone (TZ), and it is speculated to be the remnant of lithosphere detached during the continental collision. We conduct a comparative study that utilizes triplicate arrivals of high-resolution P waveforms to investigate the velocity structure of mantle beneath the central Iranian Plateau and surroundings. Due to the abrupt increase in seismic wave speeds and density across the 410- and 660-km discontinuities, seismic waves at epicentral distances of 15-30 degrees would form multiple arrivals and the relative times and amplitudes between them are most sensitive to the variations in seismic speeds near the TZ. We combine several broadband arrays to construct 8 seismic profiles, each about 800 km long, that mainly sample the TZ under central Iranian Plateau, Turan shield and part of South Caspian basin. Move-outs between arrivals are clear in the profiles. Relative timings suggest a slightly smaller 660-km contrast under stable Turan shield. In the next stage, it is necessary to model waveforms after the source effect being removed properly. Our preliminary tests show that the F-K method can efficiently calculate the synthetic seismograms. We will determine the 1D velocity model for each sampled sector by minimizing the overall misfits between observed and predicted waveforms. The lateral variations may be further explored by comparing adjacent sectors. The results are important for understanding the lithosphere-mantle interaction during the process of continental collision.

Diverse continental subduction scenarios along the Arabia-Eurasia collision zone

NASA Astrophysics Data System (ADS)

Kaban, M. K.; Petrunin, A.; El Khrepy, S.; Al-Arifi, N. S.

2017-12-01

The Arabia-Eurasia continental collision zone is one of the largest and most active on the Earth. It has been discussed already long ago that the convergence of these plates implies subduction of the lithosphere. However, scenarios of this process are still debatable. Even direction of the present-day continental subduction is not clear. Previously, principal conclusions about structure of the upper mantle in this region were chiefly based on seismic tomography results. However, seismic velocities not always provide a complete image of the deep interiors since they are chiefly affected by temperature variations and less - by composition. Here we construct a 3D model of the mantle down to 700 km, which is based on a joint inversion of seismic tomography, residual (crust free) gravity field and residual topography (Kaban et al., 2016). Several cross-sections across the collision zone demonstrate principal variations of the continental subduction scenarios from northwest to southeast. In the southeastern part we observe subduction of the Eurasian plate under the West Great Caucasus, Pontic mountains and further under the northwestern part of the Arabian plate. However, the situation is changed when we move to the East Great Caucasus and Zagros, where clear double-sided subduction is observed. The Arabian plate is subducting under the Zagros, while the Eurasian plate - under the Caucasus merging in the transition zone. This situation persists further to the southeast, where we observe the subduction of the South Caspian block under Alborz accompanied by the counteracting penetration of the Arabian plate from the south. More to the southeast, the subduction of the Arabian plate is stagnated, while the subduction of the Eurasian plate can be traced down to the bottom of the transition zone under the northeastern flank of the Arabian plate. In the southern rim of the collision zone under Makran, we don't find any evidence for the present day subduction; remnants of the formerly subducted slabs are located below 200 km. Kaban, M. K., S. El Khrepy, N. Al-Arifi, M. Tesauro, and W. Stolk (2016), Three dimensional density model of the upper mantle in the Middle East: Interaction of diverse tectonic processes, J. Geophys. Res. Solid Earth, 121.

Geologic map of the Providence Mountains in parts of the Fountain Peak and adjacent 7.5' quadrangles, San Bernardino County, California

USGS Publications Warehouse

Stone, Paul; Miller, David M.; Stevens, Calvin H.; Rosario, Jose J.; Vazquez, Jorge A.; Wan, Elmira; Priest, Susan S.; Valin, Zenon C.

2017-03-22

IntroductionThe Providence Mountains are in the eastern Mojave Desert about 60 km southeast of Baker, San Bernardino County, California. This range, which is noted for its prominent cliffs of Paleozoic limestone, is part of a northeast-trending belt of mountainous terrain more than 100 km long that also includes the Granite Mountains, Mid Hills, and New York Mountains. Providence Mountains State Recreation Area encompasses part of the range, the remainder of which is within Mojave National Preserve, a large parcel of land administered by the National Park Service. Access to the Providence Mountains is by secondary roads leading south and north from Interstate Highways 15 and 40, respectively, which bound the main part of Mojave National Preserve.The geologic map presented here includes most of Providence Mountains State Recreation Area and land that surrounds it on the north, west, and south. This area covers most of the Fountain Peak 7.5′ quadrangle and small adjacent parts of the Hayden quadrangle to the north, the Columbia Mountain quadrangle to the northeast, and the Colton Well quadrangle to the east. The map area includes representative outcrops of most of the major geologic elements of the Providence Mountains, including gneissic Paleoproterozoic basement rocks, a thick overlying sequence of Neoproterozoic to Triassic sedimentary rocks, Jurassic rhyolite that intrudes and overlies the sedimentary rocks, Jurassic plutons and associated dikes, Miocene volcanic rocks, and a variety of Quaternary surficial deposits derived from local bedrock units. The purpose of the project was to map the area in detail, with primary emphasis on the pre-Quaternary units, to provide an improved stratigraphic, structural, and geochronologic framework for use in land management applications and scientific research.

Zagros Mountains, Iran, SRTM Shaded Relief Anaglyph

NASA Technical Reports Server (NTRS)

2004-01-01

The Zagros Mountains in Iran offer a visually stunning topographic display of geologic structure in layered sedimentary rocks. This scene is nearly 100 kilometers (62 miles) wide but is only a small part of similar terrain that covers much of southern Iran. This area is actively undergoing crustal shortening, as global tectonics moves Arabia toward Asia. Consequently, layers of sedimentary rock are folding much like a carpet will fold if pushed. The convex upward folds create structures called anticlines, which are prominently seen here. The convex downward folds (between the anticlines) create structures called synclines, which are mostly buried and hidden by sediments eroding off the anticlines. Layers having differing erosional resistance create distinctive patterns, often sawtooth triangular facets, that encircle the anticlines. Local relief between the higher mountain ridges and their intervening valleys is about 1,200 meters (about 4,000 feet).

Salt extrusions and salt 'glaciers' are another set of geologic features readily evident in the topography. Salt deposits, likely created by the evaporation of an ancient inland sea, were buried by the sediments that now make up the layers of the anticlines and synclines. But salt is less dense than most other rocks, so it tends to migrate upward through Earth's crust in vertical columns called 'diapirs'. The compressive folding process has probably facilitated the formation of these diapirs, and the diapirs, in turn, are probably enhancing some anticlines by 'inflating' them with salt. Where the diapirs reach the surface, the salt extrudes, much like lava from a volcano, and the salt flows. Two prominent salt flows are evident in the same valley, leaking from neighboring anticlines, just north of the scene center.

This anaglyph was created by deriving a shaded relief image from the SRTM data, draping it back over the SRTM elevation model, and then generating two differing perspectives, one for each eye. Illumination is from the north (top). When viewed through special glasses, the anaglyph is a vertically exaggerated view of the Earth's surface in its full three dimensions. Anaglyph glasses cover the left eye with a red filter and cover the right eye with a blue filter.

Elevation data used in this image were acquired by the Shuttle Radar Topography Mission (SRTM) aboard the Space Shuttle Endeavour, launched on February 11, 2000. SRTM used the same radar instrument that comprised the Spaceborne Imaging Radar-C/X-Band Synthetic Aperture Radar (SIR-C/X-SAR) that flew twice on the Space Shuttle Endeavour in 1994. SRTM was designed to collect three-dimensional measurements of the Earth's surface. To collect the 3-D data, engineers added a 60-meter-long (200-foot) mast, installed additional C-band and X-band antennas, and improved tracking and navigation devices. The mission is a cooperative project between the National Aeronautics and Space Administration (NASA), the National Geospatial-Intelligence Agency (NGA) of the U.S. Department of Defense (DoD), and the German and Italian space agencies. It is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Earth Science Enterprise, Washington, D.C.

Size: 98.1 kilometers (60.8 miles) by 148.1 kilometers (91.8 miles) Location: 27.3 degrees North latitude, 54.5 degrees East longitude Orientation: North toward the top Image Data: Shaded SRTM elevation model Date Acquired: February 2000

The Ellsworth Mountains: critical and enduringly enigmatic

USGS Publications Warehouse

Dalziel, I.W.D.

2007-01-01

The elevation (~5000m) is high for an early Mesozoic fold belt. Thermal uplift could have been initiated during Jurassic-Cretaceous block rotation and Weddell Sea opening and continued into the Cenozoic. The history of glaciation provides input for models of ice loading and unloading. Measurements of present-day uplift test these models and help assess change in the mass of the ice sheet and hence in global sea level.

Lichenized and lichenicolous fungi from the Albanian Alps (Kosovo, Montenegro).

PubMed

Strasser, Eva A; Hafellner, Josef; Stešević, Danijela; Geci, Fehmi; Mayrhofer, Helmut

2015-11-01

396 taxa (381 species) of lichenized and 45 species of lichenicolous fungi from the upper montane, subalpine and alpine belts of the Albanian Alps (= Prokletije Mountain Range, Bjeshkët e Nemuna) are presented. 92 lichenized and 26 lichenicolous fungi are new to Montenegro, 165 lichenized and 24 lichenicolous fungi are new to Kosovo, and 25 lichenized fungi (23 species) are new for the Balkan Peninsula.

Lichenized and lichenicolous fungi from the Albanian Alps (Kosovo, Montenegro)

PubMed Central

Strasser, Eva A.; Hafellner, Josef; Stešević, Danijela; Geci, Fehmi; Mayrhofer, Helmut

2016-01-01

396 taxa (381 species) of lichenized and 45 species of lichenicolous fungi from the upper montane, subalpine and alpine belts of the Albanian Alps (= Prokletije Mountain Range, Bjeshkët e Nemuna) are presented. 92 lichenized and 26 lichenicolous fungi are new to Montenegro, 165 lichenized and 24 lichenicolous fungi are new to Kosovo, and 25 lichenized fungi (23 species) are new for the Balkan Peninsula. PMID:26869727

38. VIEW OF CRUSHER ROOM FROM NORTH. THE CRUSHER IS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

38. VIEW OF CRUSHER ROOM FROM NORTH. THE CRUSHER IS MISSING, BUT THREE GRIZZLIES AND THE FEED GATE FROM THE SOUTH ORE BIN ARE STILL VISIBLE. PULLEY AT BOTTOM OF THE VIEW IS THE BEGINNING OF THE 24 INCH BELT CONVEYOR. NOTE SOUTH BIN DIAGONAL SHEATHING MATCHES THAT IN VIEW SD-2-3. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

The nature and location of the suture zone in the Rokelide orogen, Sierra Leone: Geochemical evidence

NASA Astrophysics Data System (ADS)

Lytwyn, Jennifer; Burke, Kevin; Culver, Stephen

2006-12-01

The boundaries of the West African Craton mark the location of a continuous suture zone that records Neoproterozoic to Early Cambrian oceanic closure. The western part of the circum-West African suture zone extends through the line of outcrop of the Mauritanide, Bassaride and Rokelide mountain belts. Our geochemical analyses are consistent with the idea that igneous and metamorphic rocks of the Rokelide and Southern Mauritanide mountain belts of West Africa occupy a suture zone that records the closing of a Neoproterozoic to Early Cambrian ocean basin during the Pan-African orogeny and final assembly of Gondwana. The closing of that basin was marked by the collision between Archean rocks of the Leo massif of the West African Craton and reactivated Archean and Paleoproterozoic rocks that now outcrop nearer to the coast of Africa in Sierra Leone and Liberia. Within the Rokelides, the geochemistry of the Kasewe Hills volcanic rocks and Marampa amphibolite indicate that remnants of an arc system are caught up in the suture zone. The geochemistry of Guingan schists that outcrop along strike of the Rokelides is compatible with the idea that the metamorphosed equivalents of the Marampa and Kasewe Hills arc volcanic rocks extend through the Bassarides and into the Southern Mauritanides.

Active NE-SW Compressional Strain Within the Arabian Plate

NASA Astrophysics Data System (ADS)

Floyd, M. A.; ArRajehi, A.; King, R. W.; McClusky, S.; Reilinger, R. E.; Douad, M.; Sholan, J.; Bou-Rabee, F.

2012-12-01

Motion of the Arabian plate with respect to Eurasia has been remarkably steady over more than 25 Myr as revealed by comparison of geodetic and plate tectonic reconstructions (e.g., McQuarrie et al., 2003, GRL; ArRajehi et al., 2010, Tectonics). While internal plate deformation is small in comparison to the rate of Arabia-Eurasia convergence, the improved resolution of GPS observations indicate ~ NE-SW compressional strain that appears to affect much of the plate south of latitude ~ 30°N. Seven ~ NE-SW oriented inter-station baselines all indicated shortening at rates in the range of 0.5-2 mm/yr, for the most part with 1-sigma velocity uncertainties < 0.4 mm/yr. Plate-scale strain rates exceed 2×10-9/yr. The spatial distribution of strain can not be resolved from the sparse available data, but strain appears to extend at least to Riyadh, KSA, ~ 600 km west of the Zagros Fold and Thrust Belt that forms the eastern, collisional boundary of the Arabian plate with Eurasia (Iran). Geodetic velocities in the plate tectonic reference frame for Arabia, derived from magnetic anomalies in the Red Sea (Chu and Gordon, 1998, GJI), show no significant E-W motion for GPS stations located along the Red Sea coast (i.e., geodetic and plate tectonic spreading rates across the Red Sea agree within their resolution), in contrast to sites in the plate interior and along the east side of the plate that indicate east-directed motions. In addition, NE-SW contraction is roughly normal to ~ N-S striking major structural folds in the sedimentary rocks within the Arabian Platform. These relationships suggest that geodetically observed contraction has characterized the plate for at least the past ~ 3 Myr. Broad-scale contraction of the Arabian plate seems intuitively reasonable given that the east and north sides of the plate are dominated by active continental collision (Zagros, E Turkey/Caucasus) while the west and south sides are bordered by mid-ocean ridge spreading (Red Sea and Gulf of Aden). While the dynamic processes responsible for the observed strain remain speculative, we are investigating models involving long-range effects of the Arabia-Eurasia collision, ridge-push along the Red Sea and Gulf of Aden, and gravitational spreading of the higher elevation Arabian Shield towards the lower elevation platform.

The age of the Keystone thrust: laser-fusion 40Ar/39Ar dating of foreland basin deposits, southern Spring Mountains, Nevada

USGS Publications Warehouse

Fleck, R.J.; Carr, M.D.

1990-01-01

Nonmarine sedimentary and volcaniclastic foreland-basin deposits in the Spring Mountains are cut by the Contact and Keystone thrusts. These synorogenic deposits, informally designated the Lavinia Wash sequence by Carr (1980), previously were assigned a Late Jurassic to Early Cretaceous(?) age. New 40Ar.39Ar laser-fusion and incremental-heating studies of a tuff bed in the Lavinia Wash sequence support a best estimate age of 99.0 ?? 0.4 Ma, indicating that the Lavinia Wash sequence is actually late Early Cretaceous in age and establishing a maximum age for final emplacement of the Contact and Keystone thrust plates consistent with the remainder of the Mesozoic foreland thrust belt. -from Authors

Ouachitas need more exploratory drilling

USGS Publications Warehouse

Suneson, Neil H.; Campbell, Jock A.

1990-01-01

The Ouachita Mountains in southeastern Oklahoma and western Arkansas are part of a mostly buried late Paleozoic fold and thrust belt that extends from Alabama to northern Mexico. The principal hydrocarbon reservoirs in the Ouachita tectonic province can be subdivided into those that produce natural gas from shallow-water units and those that produce oil and/or natural gas from deep-water units. They can also be divided into those that are fractured and those that produce from primary pore spaces or vugs. The first successful oil well in the Ouachita Mountains was drilled in 1913 or 1914. Since the discovery of the Redden field, over 800 oil and gas wells have been drilled in the Ouachita tectonic province in Oklahoma. Yet, most of the region remains little explored.

Age revision of the Neotethyan arc migration into the southeast Urumieh-Dokhtar belt of Iran: Geochemistry and U-Pb zircon geochronology

NASA Astrophysics Data System (ADS)

Hosseini, Mohammad Reza; Hassanzadeh, Jamshid; Alirezaei, Saeed; Sun, Weidong; Li, Cong-Ying

2017-07-01

The Urumieh-Dokhtar magmatic belt of Central Iran runs parallel to the Zagros orogenic belt and has been resulted from Neotethys ocean subduction underneath Eurasia. The Bahr Aseman volcanic-plutonic complex (BAC), covering an area 2000 km2 in the Kerman magmatic belt (KMB) in the southern section of the Urumieh-Dokhtar belt, has long been considered as the earliest manifestation of extensive Cenozoic arc magmatism in KMB. The nature and timing of the magmatism, however, is poorly constrained. An area 1000 km2, in BAC and adjacent Razak volcaniclastic complex and Jebal Barez-type granitoids, was mapped and sampled for geochemistry and geochronology. Andesite and basaltic andesite are the main volcanic components in the study area; plutonic bodies vary from tonalite to quartz diorite, granodiorite and biotite-granite. The rocks in BAC display dominantly normal calc-alkaline character. On spider diagrams, the rocks are characterized by enrichments in LILE relative to HFSE and enrichments in LREE relative to HREE. These features suggest a subduction related setting for the BAC. LaN/YbN ratios for the intrusive and volcanic rocks range from 1.41 to 5.16 and 1.01 to 6.42, respectively. These values are lower than those for other known granitoids in KMB, namely the abyssal, dominantly Oligocene Jebal Barez-type (LaN/YbN = 1.66-9.98), and the shallow, dominantly late Miocene Kuh Panj-type (LaN/YbN = 12.97-36.04) granitoids. This suggests a less evolved magma source for the BAC igneous rocks. In Y vs. Nb and Th/Yb vs. La/Yb discrimination diagrams, an island-arc setting is defined for the BAC rocks. The rocks further plot in primitive island-arc domain in Nb vs. Rb/Zr and Y/Nb vs. TiO2 diagrams. The BAC volcanic and plutonic rocks yielded zircon U-Pb ages of 78.1 to 82.7 Ma and 77.5 to 80.8 Ma, respectively. Zircon U-Pb dating of volcanic rocks and granitoids from the adjacent Razak complex and the Jebal Barez-type granitoids indicated 48.2 Ma and 26.1 Ma ages, respectively, consistent with earlier works on similar rocks elsewhere in KMB. The new data allow a revision of the chronostratigraphy/tectonic history of KMB. In Late Cretaceous, a back arc rift developed extending from Nain to Baft (NB back arc) to the northeast of the Sanandaj-Sirjan magmatic arc. Along with shrinking of the Neotethys Ocean, the dip angle of the subducting slab decreased during the Late Cretaceous, and arc magmatism moved from the Sanandaj-Sirjan zone landward. Meanwhile, Bahr Aseman volcanic-plutonic complex formed as an island-arc in NB back arc rift. Later with arc shift, due to shallowing of subducted slab, magmatism moved toward continent leading to extensive volcanism in Kerman magmatic arc during Eocene and Oligocene, represented by volcanic-sedimentary Razak and Hezar Complexes, respectively.

Early Neolithic genomes from the eastern Fertile Crescent

PubMed Central

Broushaki, Farnaz; Thomas, Mark G; Link, Vivian; López, Saioa; van Dorp, Lucy; Kirsanow, Karola; Hofmanová, Zuzana; Diekmann, Yoan; Cassidy, Lara M.; Díez-del-Molino, David; Kousathanas, Athanasios; Sell, Christian; Robson, Harry K.; Martiniano, Rui; Blöcher, Jens; Scheu, Amelie; Kreutzer, Susanne; Bollongino, Ruth; Bobo, Dean; Davudi, Hossein; Munoz, Olivia; Currat, Mathias; Abdi, Kamyar; Biglari, Fereidoun; Craig, Oliver E.; Bradley, Daniel G; Shennan, Stephen; Veeramah, Krishna; Mashkour, Marjan

2016-01-01

We sequenced Early Neolithic genomes from the Zagros region of Iran (eastern Fertile Crescent), where some of the earliest evidence for farming is found, and identify a previously uncharacterized population that is neither ancestral to the first European farmers nor has contributed significantly to the ancestry of modern Europeans. These people are estimated to have separated from Early Neolithic farmers in Anatolia some 46-77,000 years ago and show affinities to modern day Pakistani and Afghan populations, but particularly to Iranian Zoroastrians. We conclude that multiple, genetically differentiated hunter-gatherer populations adopted farming in SW-Asia, that components of pre-Neolithic population structure were preserved as farming spread into neighboring regions, and that the Zagros region was the cradle of eastward expansion. PMID:27417496

Progressive deformation and superposed fabrics related to Cretaceous crustal underthrusting in western Arizona, U.S.A.

USGS Publications Warehouse

Laubach, S.E.; Reynolds, S.J.; Spencer, J.E.; Marshak, S.

1989-01-01

In the Maria fold and thrust belt, a newly recognized E-trending Cretaceous orogenic belt in the southwestern United States, ductile thrusts, large folds and superposed cleavages record discordant emplacement of crystalline thrust sheets across previously tilted sections of crust. Style of deformation and direction of thrusting are in sharp contrast to those of the foreland fold-thrust belt in adjacent segments of the Cordillera. The net effect of polyphase deformation in the Maria belt was underthrusting of Paleozoic and Mesozoic metasedimentary rocks under the Proterozoic crystalline basement of North America. The structure of the Maria belt is illustrated by the Granite Wash Mountains in west-central Arizona, where at least four non-coaxial deformation events (D1-D4) occurred during the Cretaceous. SSE-facing D1 folds are associated with S-directed thrusts and a low-grade slaty cleavage. D1 structures are truncated by the gently-dipping Hercules thrust zone (D2), a regional SW-vergent shear zone that placed Proterozoic and Jurassic crystalline rocks over upturned Paleozoic and Mesozoic supracrustal rocks. Exposures across the footwall margin of the Hercules thrust zone show the progressive development of folds, cleavage and metamorphism related to thrusting. D3 and D4 structures include open folds and spaced cleavages that refold or transect D1 and D2 folds. The D2 Hercules thrust zone and a D3 shear zone are discordantly crosscut by late Cretaceous plutons. ?? 1989.

Earth Observations taken by Expedition 38 crewmember

NASA Image and Video Library

2014-01-30

ISS038-E-039032 (30 Jan. 2014) --- Prince Albert, South Africa is featured in this image photographed by an Expedition 38 crew member on the International Space Station. Space station crews sometimes take detailed images with an 800mm lens, such as this view of the small town of Prince Albert (population just more than 7,000). The town lies at the foot of the mountains known as the Great Swartberg in southern South Africa, about 220 miles (355 kilometers) east of Cape Town. Prince Albert, named after Queen Victoria's husband, appears as a cluster of whitewashed buildings (left) at the foot of the mountains, larger dwellings nearer the steep mountain front and smaller dwellings further away. Despite its small size, the dry climate and the water supply from gorges immediately upstream (a small reservoir appears extreme left) have made it well-known as a productive point in the Karroo semidesert. Olive groves especially, with other crops, flourish on the valleys floors, surrounded by sheep and ostrich ranches. Founded 250 years ago, this small town retains more than a dozen registered historic buildings in the Victorian and Cape Dutch styles. Based on this and other small Karroo towns as get-aways from South Africa's large, crowded cities, tourism has developed significantly in the last 20 years. Swartberg means Black Mountain in Afrikaans, and winter snow (not visible in this image) along the mountain tops (4,500-6,500 feet; 1,370-1,980 meters, above the town) makes for spectacular scenery. The mountains are part of the ancient Cape Fold Mountain Belt. Gorges through the mountains provide impressive side-on views of tightly folded and broken rock layers associated with the mountain-building episode.

A hidden Late Cretaceous arc and subsequent magmatic events in the Caucasus-Iran-Anatolia (CIA) orogenic belt: Detrital zircon U-Pb and Hf isotopic constraints

NASA Astrophysics Data System (ADS)

Tien, C. Y.; Lin, Y. C.; Chu, M. F.; Chung, S. L.; Bi˙ngöl, A. F.

2017-12-01

The Caucasus-Iran-Anatolia (CIA) orogenic belt formed by "Turkic-type orogeny" consists mainly of subduction-accretion complexes following the collision between Eurasia and Arabia and the closure of Neotethy. This study reports U-Pb and Hf isotopic data of detrital zircon separates from five Eocene to mid-Miocene sandstone samples from Divrigi and Duranlar in the west to the Mus basin in the east, all locating in the northern part of the Bitlis-Zagros suture zone. The U-Pb age data suggest four main magmatic episodes: (1) 100-70 Ma, (2) 60-40 Ma, (3) 30 Ma, and (4) 15 Ma. The Late Cretaceous zircons recovered mainly from the Mus basin are marked by a significant Hf isotopic variation over time, with ɛHf(T) values dropping from +15 to -10. Zircons from the second and third episodes show spatial variations in isotopic compositions, with positive ɛHf(T) values (+10 to +5) in the Mus basin and heterogeneous ɛHf(T) values (+10 to -10) in the west. The fourth and youngest episode of zircons, mainly from Duranlar area, shows uniform ɛHf(T) values around +5. We attribute the Late Cretaceous episode of zircons to the broadly coeval Elazig arc magmatism that, according to our counterpart study, occurred as a short-lived, intra-oceanic arc system by subduction initiation after the formation of Neotethyan ophiolites in the region. Moreover, we argue that this Late Cretaceous arc system may have existed more widely within the southern branch of Neothethys than that suggested by present-day outcrops. The dramatic change in Hf isotopic composition from 100 to 70 Ma, also observed in the rock record by our counterpart study, may be interpreted as a result of subduction to accretion processes. The remaining three episodes of zircons are related to younger stages of magmatism within or around the suture zone that remains poorly studied. Our results indicate that detrital zircon is a useful tool to uncover "hidden" magmatic records in the CIA and other "Turkic-type" orogenic belts where complex interaction of multiple micro-terrains may have taken place during accretionary and collisional orogenesis.

Genetic links among fluid cycling, vein formation, regional deformation, and plutonism in the Juneau gold belt, southeastern Alaska

USGS Publications Warehouse

Miller, Lance D.; Goldfarb, Richard J.; Gehrels, George E.; Snee, Lawrence W.

1994-01-01

Gold-bearing quartz vein systems in the Juneau gold belt formed within a 160-km- long by 5- to 8-km-wide zone along the western margin of the Coast Mountains, Alaska. Vein systems are spatially associated with shear zones adjacent to terrane-bounding, mid-Cretaceous thrust faults. Analysis of vein orientations and sense of shear data define a stress configuration with greatest and least principal axes oriented subhorizontally with northeast-southwest trends and subverticaly, respectively. This local stress configuration is compatible with the far-field plate configuration during Eocene time. Isotopic ages of vein formation indicate that fluid cycling occurred between 56.5 and ≥52.8 Ma, and are consistent with a genetic link between veining and a change in plate motion in early Eocene time. Veining was also synchronous with the latter stages of rapid exhumation and voluminous plutonism immediately inboard of the gold belt. We propose a model in which interacting tectonic events facilitated fault-valve action and vein development along now-exhumed shear zones.

Stratigraphic and Paleomagnetic Comparisons of Mesoproterozoic Strata and Sills from the Belt Basin, NW Montana, USA, and NW Anabar Shield, Russia: Testing a Precambrian Plate Reconstruction

NASA Astrophysics Data System (ADS)

Sears, J. W.; Pavlov, V.; Veselovskiy, R.; Khudoley, A.

2008-12-01

Mesoproterozoic sedimentary strata and mafic sills overlie Archean and Paleoproterozoic basement rocks with profound unconformity in NW Montana and along the NW margin of the Anabar Shield in northern Siberia. The two localities plot adjacent to one another on a Precambrian plate reconstruction proposed by Sears and Price (2003) that places the NE margin of the Siberian craton against the SW margin of the North American craton. The plate reconstruction predicts that these strata occupied contiguous parts of an intracratonic basin prior to late Neoproterozoic breakup of Rodinia. Here we show that the Mesoproterozoic stratigraphic sequences, sedimentary structures, and lithologies of the NW Anabar margin closely match the Neihart, Chamberlain, and Newland formations of the Little Belt Mountains of Montana. They may predate opening of the Belt Supergroup rift basin at ca. 1500 Ma, when a major mafic magmatic episode occurred in both regions. Preliminary paleomagnetic data from the Siberian section will be compared with the Laurentian APWP to evaluate the reconstruction.

Preliminary Geological Map of the Fortuna Tessera (V-2) Quadrangle, Venus

NASA Technical Reports Server (NTRS)

Ivanov, M. A.; Head, J. W.

2009-01-01

The Fortuna Tessera quadrangle (50-75 N, 0-60 E) is a large region of tessera [1] that includes the major portion of Fortuna and Laima Tesserae [2]. Near the western edge of the map area, Fortuna Tessera is in contact with the highest moun-tain belt on Venus, Maxwell Montes. Deformational belts of Sigrun-Manto Fossae (extensional structures) and Au ra Dorsa (contractional structures) separate the tessera regions. Highly deformed terrains correspond to elevated regions and mildly deformed units are with low-lying areas. The sets of features within the V-2 quadrangle permit us to address the following important questions: (1) the timing and processes of crustal thickening/thinning, (2) the nature and origin of tesserae and deformation belts and their relation to crustal thickening processes, (3) the existence or absence of major evolutionary trends of volcanism and tectonics. The key feature in all of these problems is the regional sequence of events. Here we present description of units that occur in the V-2 quadrangle, their regional correlation chart (Fig. 1), and preliminary geological map of the region (Fig. 2).

Genomic insights into the origin of farming in the ancient Near East.

PubMed

Lazaridis, Iosif; Nadel, Dani; Rollefson, Gary; Merrett, Deborah C; Rohland, Nadin; Mallick, Swapan; Fernandes, Daniel; Novak, Mario; Gamarra, Beatriz; Sirak, Kendra; Connell, Sarah; Stewardson, Kristin; Harney, Eadaoin; Fu, Qiaomei; Gonzalez-Fortes, Gloria; Jones, Eppie R; Roodenberg, Songül Alpaslan; Lengyel, György; Bocquentin, Fanny; Gasparian, Boris; Monge, Janet M; Gregg, Michael; Eshed, Vered; Mizrahi, Ahuva-Sivan; Meiklejohn, Christopher; Gerritsen, Fokke; Bejenaru, Luminita; Blüher, Matthias; Campbell, Archie; Cavalleri, Gianpiero; Comas, David; Froguel, Philippe; Gilbert, Edmund; Kerr, Shona M; Kovacs, Peter; Krause, Johannes; McGettigan, Darren; Merrigan, Michael; Merriwether, D Andrew; O'Reilly, Seamus; Richards, Martin B; Semino, Ornella; Shamoon-Pour, Michel; Stefanescu, Gheorghe; Stumvoll, Michael; Tönjes, Anke; Torroni, Antonio; Wilson, James F; Yengo, Loic; Hovhannisyan, Nelli A; Patterson, Nick; Pinhasi, Ron; Reich, David

2016-08-25

We report genome-wide ancient DNA from 44 ancient Near Easterners ranging in time between ~12,000 and 1,400 bc, from Natufian hunter-gatherers to Bronze Age farmers. We show that the earliest populations of the Near East derived around half their ancestry from a 'Basal Eurasian' lineage that had little if any Neanderthal admixture and that separated from other non-African lineages before their separation from each other. The first farmers of the southern Levant (Israel and Jordan) and Zagros Mountains (Iran) were strongly genetically differentiated, and each descended from local hunter-gatherers. By the time of the Bronze Age, these two populations and Anatolian-related farmers had mixed with each other and with the hunter-gatherers of Europe to greatly reduce genetic differentiation. The impact of the Near Eastern farmers extended beyond the Near East: farmers related to those of Anatolia spread westward into Europe; farmers related to those of the Levant spread southward into East Africa; farmers related to those of Iran spread northward into the Eurasian steppe; and people related to both the early farmers of Iran and to the pastoralists of the Eurasian steppe spread eastward into South Asia.

Timing of atmospheric precipitation in the Zagros Mountains inferred from a multi-proxy record from Lake Mirabad, Iran

NASA Astrophysics Data System (ADS)

Stevens, Lora R.; Ito, Emi; Schwalb, Antje; Wright, Herbert E.

2006-11-01

A sediment core 7.2 m long from Lake Mirabad, Iran, was examined for loss-on-ignition, mineralogy, oxygen-isotopic composition of authigenic calcite, and trace-element composition of ostracodes to complement earlier pollen and ostracode-assemblage studies. Pollen, ostracode-inferred lake level, and high Sr/Ca ratios indicate that the early Holocene (10000 to 6500 cal yr BP) was drier than the late Holocene. Low δ18O values during this interval are interpreted as resulting from winter-dominated precipitation, characteristic of a Mediterranean climate. Increasing δ18O values after 6500 cal yr BP signal a gradual increase in spring rains, which are present today. A severe 600-yr drought occurred at ca. 5500 cal yr BP, shortly after the transition from pistachio-almond to oak forest. During the late Holocene, two milder droughts occurred at about 1500 and 500 cal yr BP. Within the resolution of the record, no drought is evident during the collapse of the Akkadian empire (4200-3900 cal yr BP). Rather, a decrease in δ18O values to early-Holocene levels may indicate the return to a Mediterranean precipitation regime.

Genomic insights into the origin of farming in the ancient Near East

PubMed Central

Lazaridis, Iosif; Nadel, Dani; Rollefson, Gary; Merrett, Deborah C.; Rohland, Nadin; Mallick, Swapan; Fernandes, Daniel; Novak, Mario; Gamarra, Beatriz; Sirak, Kendra; Connell, Sarah; Stewardson, Kristin; Harney, Eadaoin; Fu, Qiaomei; Gonzalez-Fortes, Gloria; Jones, Eppie R.; Roodenberg, Songül Alpaslan; Lengyel, György; Bocquentin, Fanny; Gasparian, Boris; Monge, Janet M.; Gregg, Michael; Eshed, Vered; Mizrahi, Ahuva-Sivan; Meiklejohn, Christopher; Gerritsen, Fokke; Bejenaru, Luminita; Blüher, Matthias; Campbell, Archie; Cavalleri, Gianpiero; Comas, David; Froguel, Philippe; Gilbert, Edmund; Kerr, Shona M.; Kovacs, Peter; Krause, Johannes; McGettigan, Darren; Merrigan, Michael; Merriwether, D. Andrew; O'Reilly, Seamus; Richards, Martin B.; Semino, Ornella; Shamoon-Pour, Michel; Stefanescu, Gheorghe; Stumvoll, Michael; Tönjes, Anke; Torroni, Antonio; Wilson, James F.; Yengo, Loic; Hovhannisyan, Nelli A.; Patterson, Nick; Pinhasi, Ron; Reich, David

2016-01-01

We report genome-wide ancient DNA from 44 ancient Near Easterners ranging in time between ~12,000-1,400 BCE, from Natufian hunter-gatherers to Bronze Age farmers. We show that the earliest populations of the Near East derived around half their ancestry from a ‘Basal Eurasian’ lineage that had little if any Neanderthal admixture and that separated from other non-African lineages prior to their separation from each other. The first farmers of the southern Levant (Israel and Jordan) and Zagros Mountains (Iran) were strongly genetically differentiated, and each descended from local hunter-gatherers. By the time of the Bronze Age, these two populations and Anatolian-related farmers had mixed with each other and with the hunter-gatherers of Europe to drastically reduce genetic differentiation. The impact of the Near Eastern farmers extended beyond the Near East: farmers related to those of Anatolia spread westward into Europe; farmers related to those of the Levant spread southward into East Africa; farmers related to those from Iran spread northward into the Eurasian steppe; and people related to both the early farmers of Iran and to the pastoralists of the Eurasian steppe spread eastward into South Asia. PMID:27459054

Seismic Monitoring for the United Arab Emirates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodgers, A; Nakanishi, K

2005-04-11

There is potential for earthquakes in the United Arab Emirates and in the Zagros mountains to cause structural damage and pose a threat to safety of people. Damaging effects from earthquakes can be mitigated by knowledge of the location and size of earthquakes, effects on construction, and monitoring these effects over time. Although a general idea of seismicity in the UAE may be determined with data from global seismic networks, these global networks do not have the sensitivity to record smaller seismic events and do not have the necessary accuracy to locate the events. A National Seismic Monitoring Observatory ismore » needed for the UAE that consists of a modern seismic network and a multidisciplinary staff that can analyze and interpret the data from the network. A seismic network is essential to locate earthquakes, determine event magnitudes, identify active faults and measure ground motions from earthquakes. Such a network can provide the data necessary for a reliable seismic hazard assessment in the UAE. The National Seismic Monitoring Observatory would ideally be situated at a university that would provide access to the wide range of disciplines needed in operating the network and providing expertise in analysis and interpretation.« less

Chelyabinsk fireball and Dyatlov pass tragedy

NASA Astrophysics Data System (ADS)

Kochemasov, G. G.

2013-09-01

The Chelyabinsk bolide as well as the Kunashak meteorite in 1949 (Fig. 3, black square) hit ground in ectonically peculiar place in the Ural Mountains. The main explosion was followed by a series of weaker bangs. The long Uralian fold belt (Pz) separates two subsectors (1 & 2, Fig. 1) of the Eurasian sector (1+2) of the Eastern hemisphere sectoral structure (Fig. 1). At the Pamirs-Hindukush massif (the "Pamirs' cross") meet four tectonic sectors of this structure: two opposite differently uplifted (Africa-Mediterranean ++ and Asian +) and separating them two opposite differently subsided (Eurasian - and Indooceanic - -). Tectonic bisectors divide the sectors into two differently tectonically elevated subsectors. The Ural Mountains is one of these bisectors dividing the somewhat risen East-European subsector and the relatively fallen West-Siberian one. Even more important is the sharp tectonic boundary between subsided Eurasian sector and uplifted Asian one (between 2 and 3, Fig. 1). Fig. 3 shows distribution of electrophonic bolides over USSR [1]. Observations numbers are in circles. The total of 343 observations is distributed at relevant districts; accompanied meteorites were found only in 23-24 cases; in the chart are excluded background values of 1-2 observations per district. Two areas are obviously anomalous. These of the Urals, and the Eurasia-Asia sectoral contact (Novosibirsk - Yenisei R. - Tunguska). A location in the long Uralian belt is determined by its intersection with the Timan fold belt coming from the northwest (Fig. 3). The catastrophic Dyatlov pass where nine people mysteriously died at once occurs there (triangle in Fig. 3). Mancy aborigines know this place as deadly where killing white shining spheres appear. Moreover this belt intersection is well known among hunters for UFO as the Permian triangle (Fig. 2). They meet there to observe unusual atmospheric shining and other anomalous phenomena. In the Yenisei-Tunguska-Baikal region lightning balls appear regularly causing broken trees [2]. In conclusion, these two tectonically distinctive regions are famous by anomalously often appearance of bolides part of which is accompanied by meteorite falls. Out of 343 observations meteorites accompanied less than 10 %. Unclear remains a strange attraction of bolides by very pronounced tectonic features.

Exhumation of the Deylaman fault trend and its effects on the deformation style of the western Alborz belt in Iran

NASA Astrophysics Data System (ADS)

Hakimi Asiabar, Saeid; Bagheriyan, Siyamak

2018-03-01

The Alborz range in northern Iran stretches along the southern coast of the Caspian Sea and finally runs northeast and merges into the Pamir mountains in Afghanistan. Alborz mountain belt is a doubly vergent orogen formed along the northern edge of the Iranian plateau in response to the closure of the Neo-Tethys ocean and continental collision between Arabia and Eurasia. The south Caspian depression—the Alborz basin of Mesozoic age (with W-E trend) in northern Iran—inverted in response to the Arabia-Eurasia collision. Pre-existing extensional faults of the south Caspian-Alborz system preferentially reactivated as contractional faults because of tectonic inversion. These contractional structures tend to run parallel to the trends of pre-existing extensional faults and acquire W and WNW-ESE orientations across the previous accommodation zones that were imposed by the reactivation of adjacent extensional faults with different directions. The NNE to N dipping faults show evidences of reactivation. The Deylaman fault is one of the important faults of western Alborz in Iran and is an example of inversion tectonic style of deformation in the western Alborz mountain range. The Deylaman fault, with an E-W trend, contains three discontinuous fault segments in the area under investigation. These fault segments have evidence of oblique right-lateral reverse motion and links eastward to the dextral Kandavan thrust. The importance of this fault is due to its effect on sedimentation of several rock units from the Jurassic to Neogene in western Alborz; the rock facies on each side of this fault are very different and illustrate different parts of tectonic history.

Polyphase exhumation in the western Qinling Mountains, China: Rapid Early Cretaceous cooling along a lithospheric-scale tear fault and pulsed Cenozoic uplift

PubMed Central

Heberer, Bianca; Anzenbacher, Thomas; Neubauer, Franz; Genser, Johann; Dong, Yunpeng; Dunkl, István

2014-01-01

The western sector of the Qinling–Dabie orogenic belt plays a key role in both Late Jurassic to Early Cretaceous “Yanshanian” intracontinental tectonics and Cenozoic lateral escape triggered by India–Asia collision. The Taibai granite in the northern Qinling Mountains is located at the westernmost tip of a Yanshanian granite belt. It consists of multiple intrusions, constrained by new Late Jurassic and Early Cretaceous U–Pb zircon ages (156 ± 3 Ma and 124 ± 1 Ma). Applying various geochronometers (40Ar/39Ar on hornblende, biotite and K-feldspar, apatite fission-track, apatite [U–Th–Sm]/He) along a vertical profile of the Taibai Mountain refines the cooling and exhumation history. The new age constraints record the prolonged pre-Cenozoic intracontinental deformation as well as the cooling history mostly related to India–Asia collision. We detected rapid cooling for the Taibai granite from ca. 800 to 100 °C during Early Cretaceous (ca. 123 to 100 Ma) followed by a period of slow cooling from ca. 100 Ma to ca. 25 Ma, and pulsed exhumation of the low-relief Cretaceous peneplain during Cenozoic times. We interpret the Early Cretaceous rapid cooling and exhumation as a result from activity along the southern sinistral lithospheric scale tear fault of the recently postulated intracontinental subduction of the Archean/Palaeoproterozoic North China Block beneath the Alashan Block. A Late Oligocene to Early Miocene cooling phase might be triggered either by the lateral motion during India–Asia collision and/or the Pacific subduction zone. Late Miocene intensified cooling is ascribed to uplift of the Tibetan Plateau. PMID:27065503

Crustal implications of bedrock geology along the Trans-Alaska Crustal Transect (TACT) in the Brooks Range, northern Alaska

USGS Publications Warehouse

Moore, Thomas E.; Wallace, W.K.; Mull, C.G.; Adams, K.E.; Plafker, G.; Nokleberg, W.J.

1997-01-01

Geologic mapping of the Trans-Alaska Crustal Transect (TACT) project along the Dalton Highway in northern Alaska indicates that the Endicott Mountains allochthon and the Hammond terrane compose a combined allochthon that was thrust northward at least 90 km in the Early Cretaceous. The basal thrust of the combined allochthon climbs up section in the hanging wall from a ductile shear zone, in the south through lower Paleozoic rocks of the Hammond terrane and into Upper Devonian rocks of the Endicott Mountains allochthon at the Mount Doonerak antiform, culminating in Early Cretaceous shale in the northern foothills of the Brooks Range. Footwall rocks north of the Mount Doonerak antiform are everywhere parautochthonous Permian and Triassic shale of the North Slope terrane rather than Jurassic and Lower Cretaceous strata of the Colville Basin as shown in most other tectonic models of the central Brooks Range. Stratigraphic and structural relations suggest that this thrust was the basal detachment for Early Cretaceous deformation. Younger structures, such as the Tertiary Mount Doonerak antiform, deform the Early Cretaceous structures and are cored by thrusts that root at a depth of about 10 to 30 km along a deeper detachment than the Early Cretaceous detachment. The Brooks Range, therefore, exposes (1) an Early Cretaceous thin-skinned deformational belt developed during arc-continent collision and (2) a mainly Tertiary thick-skinned orogen that is probably the northward continuation of the Rocky Mountains erogenic belt. A down-to-the-south zone of both ductile and brittle normal faulting along the southern margin of the Brooks Range probably formed in the mid-Cretaceous by extensional exhumation of the Early Cretaceous contractional deformation. copyright. Published in 1997 by the American Geophysical Union.

Mapping mountain torrent hazards in the Hexi Corridor using an evidential reasoning approach

NASA Astrophysics Data System (ADS)

Ran, Youhua; Liu, Jinpeng; Tian, Feng; Wang, Dekai

2017-02-01

The Hexi Corridor is an important part of the Silk Road Economic Belt and a crucial channel for westward development in China. Many important national engineering projects pass through the corridor, such as highways, railways, and the West-to-East Gas Pipeline. The frequent torrent disasters greatly impact the security of infrastructure and human safety. In this study, an evidential reasoning approach based on Dempster-Shafer theory is proposed for mapping mountain torrent hazards in the Hexi Corridor. A torrent hazard map for the Hexi Corridor was generated by integrating the driving factors of mountain torrent disasters including precipitation, terrain, flow concentration processes, and the vegetation fraction. The results show that the capability of the proposed method is satisfactory. The torrent hazard map shows that there is high potential torrent hazard in the central and southeastern Hexi Corridor. The results are useful for engineering planning support and resource protection in the Hexi Corridor. Further efforts are discussed for improving torrent hazard mapping and prediction.

Peculiarity of the Relationship between the Seismicity and Tectonic Structure of the Pyrenees

NASA Astrophysics Data System (ADS)

Lukk, A. A.; Shevchenko, V. I.

2018-05-01

The geotectonic position of the Pyrenees mountain massif in the Alpine-Indonesian mobile belt is considered. The geological data testify to the formation of the structure of the Pyrenees in the setting of a subhorizontal compression perpendicular to the ridge. The commonly accepted interpretation considers this compression in the context of plate tectonic notions related to the collision between the Iberian and Eurasian lithospheric plates resulting from the convergence of the Eurasian and African plates. However, this interpretation is challenged by the the geodetic and seismological measurements. The GPS measurements suggest a certain cross-strike spreading rather than shortening of the Earth's crust; the focal mechanisms of the earthquakes indicate the predominance of a subhorizontal extension perpendicular to the strike of the Pyrenees mountain range. The processes of the gravitational collapse of the mountain chain during the isostatic upwelling of the orogenic crust are considered as the most probable cause of this spreading by a number of the authors.

Disposal of Chemical Agent Identification Sets at Rocky Mountain Arsenal, Colorado. Volume 2. Appendices A-D

DTIC Science & Technology

1983-08-01

N ENTER UNIT NURSER YOU ARE USING FOR THE DATA TAPE 11 FIGURE A-20 A-15 PMOMR TO P"IN? PROCES: DATA SHEET - DECOMED PIC CONTRL INSERT DATA TAPE IN...EXCHANGE/COOLER 70 CONTROL PANEL1 ACTUATORPFEELER 71 TV MONITOR 2 MOTOR 72 CART TOP3 PUMP 73 CIRCUIT BREAKER 4 VALVE 74 5 BELT 75 LIGHT6 SEAL 76 MIRAN 807

Structure of the St. Francois Mountains and surrounding lead belt, S. E. Missouri: Inferences from thermal IR and other data sets

NASA Technical Reports Server (NTRS)

Arvidson, R. E. (Principal Investigator)

1981-01-01

Heat Capacity Mapping Mission (HCMM) in the form of an apparent thermal inertia image were merged with shaded relief maps and Bouguer gravity maps. The HCMM data show that the dominant structural grain in Missouri strikes in a northwesterly direction. The strike is the same as a major basement fault or flexure identified on the basis of gravity images.

45. VIEW OF UPPER LEVEL CRUSHER ADDITION FROM CRUSHED OXIDIZED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

45. VIEW OF UPPER LEVEL CRUSHER ADDITION FROM CRUSHED OXIDIZED ORE BIN. 18 INCH BELT CONVEYOR BIN FEED, LOWER CENTER, WITH STEPHENS-ADAMSON 25 TON/HR ELEVATOR SPLIT DISCHARGE (OXIDIZED/UNOXIDIZED) IN CENTER. CRUDE ORE BINS AND MACHINE SHOP BEYOND. NOTE TOP OF CRUSHED OXIDIZED ORE BIN IS BELOW TOP OF CRUDE ORE BINS. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Styles of deformation in Ishtar Terra and their implications

NASA Astrophysics Data System (ADS)

Kaula, William M.; Bindschadler, Duane L.; Grimm, Robert E.; Hansen, Vicki L.; Roberts, Kari M.; Smrekar, Suzanne E.

1992-10-01

Styles of deformation in Ishtar Terra are examined on the basis of imaging by the Magellan radar between the start of the mission and the start of the first superior conjunction hiatus. Ishtar Terra appears to have characteristics of both plume uplifts and convergent belts, and exhibits a great variety of tectonic and volcanic activity, with large variations within distances of only a few hundred kilometers. The most prominent terrain types are the volcanic plains of Lakshmi and the mountain belts of Maxwell, Freyja, and Danu. Ishtar demonstrates three general properties of Venus. Erosional degradation is absent, leading to the preservation of patterns resulting from past activity. Many surface features are the responses of a competent layer less than 10 km thick to flows of 100 km or broader scale. These broader scale flows are controlled mainly by heterogeneities in the mantle.

Geophysical interpretations of the Libby thrust belt, northwestern Montana

USGS Publications Warehouse

Kleinkopf, M. Dean; with sections by Harrison, Jack Edward; Stanley, W.D.

1997-01-01

Interpretations of gravity and aeromagnetic anomaly data, supplemented by results from two seismic reflection profiles and five magnetotelluric soundings, were used to study buried structure and lithology of the Libby thrust belt of northwestern Montana. The gravity anomaly data show a marked correlation with major structures. The Purcell anticlinorium and the Sylvanite anticline are very likely cored by stacks of thrust slices of dense crystalline basement rocks that account for the large gravity highs across these two structures. Gravity anomaly data for the Cabinet Mountains Wilderness show a string of four broad highs. The principal magnetic anomaly sources are igneous intrusive rocks, major fault zones, and magnetite-bearing sedimentary rocks of the Ravalli Group. The most important magnetic anomalies in the principal study area are five distinct positive anomalies associated with Cretaceous or younger cupolas and stocks.

Styles of deformation in Ishtar Terra and their implications

NASA Technical Reports Server (NTRS)

Kaula, William M.; Bindschadler, Duane L.; Grimm, Robert E.; Hansen, Vicki L.; Roberts, Kari M.; Smrekar, Suzanne E.

1992-01-01

Styles of deformation in Ishtar Terra are examined on the basis of imaging by the Magellan radar between the start of the mission and the start of the first superior conjunction hiatus. Ishtar Terra appears to have characteristics of both plume uplifts and convergent belts, and exhibits a great variety of tectonic and volcanic activity, with large variations within distances of only a few hundred kilometers. The most prominent terrain types are the volcanic plains of Lakshmi and the mountain belts of Maxwell, Freyja, and Danu. Ishtar demonstrates three general properties of Venus. Erosional degradation is absent, leading to the preservation of patterns resulting from past activity. Many surface features are the responses of a competent layer less than 10 km thick to flows of 100 km or broader scale. These broader scale flows are controlled mainly by heterogeneities in the mantle.

Transport of carbon-bearing dusts from Iraq to Japan during Iraq's War

NASA Astrophysics Data System (ADS)

Tazaki, Kazue; Wakimoto, Rie; Minami, Yukiya; Yamamoto, Masayoshi; Miyata, Koshirou; Sato, Kazuhiro; Saji, Ichiro; Chaerun, S. Khodijah; Zhou, Guoping; Morishita, Tomoaki; Asada, Ryuji; Segawa, Hiromi; Imanishi, Hiroki; Kato, Rie; Otani, Yusuke; Watanabe, Tomoko

Rainwater collected during the period of February-April, 2003 in Kanazawa University and Hakui, Ishikawa Prefecture, Japan, was investigated by ion chromatography of the dissolved ions, and Scanning electron microscopy equipped with energy dispersive analyzer (SEM-EDX), electron microprobe analyzer (EPMA), transmission electron microscopy, and X-ray powder diffraction (XRD) analyses of the filtered samples. The pH, Eh, EC, dissolved oxygen (DO) and depleted U (DU) of the rainwater were also measured. The results show a rare case with low pH value of rain and high value of electrical conductivity (EC) in the rainwater during certain period. The NO 3-, SO 42- and NH 4+ concentrations on 26th March, show quite high values after oil field fires on 21st March 2003. The powdery dust and carbon-bearing nm sized particles contained in the rainwater have characteristics different from that of the Asian dust (Kosa). Since 21 March, 2003 the Iraq plunged into the war, the 9 oil field fires were reported on 25 March, 2003 in Rumaylah oil field near the borderline of Kuwait. The first precipitation was caught in Kanazawa on 24 March, 2003. The pH value of the rainwater indicated a strong acid rain (pH 3.6) with black powdery dusts. The acid rain on 27th March to 2nd April (pH 3.4-4.3; 5-17 mm) associated with WNW wind (2.7-4.1 m/s) has continued to the first 10 days of April in Kanazawa, during the 9 oil fields were burning in Iraq. The EC in rainwater collected from 24 March to 15 April, 2003, shows high concentrations of ions, suggesting high contents of water soluble-carbon particles and soot. In the meantime, it was the highest season of sandstorms at bare dried land in Iraq from the end of March to the beginning of April. Westerly wind blew around 5500 m high, and the sandstorm with 2000 m wide was transported by strong wind to Zagros 3000 m high mountains. The hot wind hit the Zagros Mountains and easily to join and rise to Westerly wind high by a rising air current. The 234U/ 238U activity (around 0.2) in typical depleted uranium (DU) is quite low compared with that (around 1.0) in natural uranium. The contamination of DU from the Iraq conflict may be, if any, negligibly small on undetectable level. On the other hand, the powdery dusts and carbon-bearing particles of rainwater have been produced by combustion of oil field in Iraq and they are directly cycling in our planet by Westerly wind. Black carbon particles are a product of incomplete combustion, and are the principal light-absorbing atmospheric aerosol. The result reminds us of the scientific values of short-term atmospheric environment records during Iraq's War. This has consequences for primary production of powdery dusts coming from Iraq to the atmosphere over half the globe away.

Intraplate mountain building in response to continent continent collision—the Ancestral Rocky Mountains (North America) and inferences drawn from the Tien Shan (Central Asia)

NASA Astrophysics Data System (ADS)

Dickerson, Patricia Wood

2003-04-01

The intraplate Ancestral Rocky Mountains of western North America extend from British Columbia, Canada, to Chihuahua, Mexico, and formed during Early Carboniferous through Early Permian time in response to continent-continent collision of Laurentia with Gondwana—the conjoined masses of Africa and South America, including Yucatán and Florida. Uplifts and flanking basins also formed within the Laurentian Midcontinent. On the Gondwanan continent, well inboard from the marginal fold belts, a counterpart structural array developed during the same period. Intraplate deformation began when full collisional plate coupling had been achieved along the continental margin; the intervening ocean had been closed and subduction had ceased—that is, the distinction between upper versus lower plates became moot. Ancestral Rockies deformation was not accompanied by volcanism. Basement shear zones that formed during Mesoproterozoic rifting of Laurentia were reactivated and exerted significant control on the locations, orientations, and modes of displacement on late Paleozoic faults. Ancestral Rocky Mountain uplifts extend as far south as Chihuahua and west Texas (28° to 33°N, 102° to 109°W) and include the Florida-Moyotes, Placer de Guadalupe-Carrizalillo, Ojinaga-Tascotal and Hueco Mountain blocks, as well as the Diablo and Central Basin Platforms. All are cored with Laurentian Proterozoic crystalline basement rocks and host correlative Paleozoic stratigraphic successions. Pre-late Paleozoic deformational, thermal, and metamorphic histories are similar as well. Southern Ancestral Rocky Mountain structures terminate along a line that trends approximately N 40°E (present coordinates), a common orientation for Mesoproterozoic extensional structures throughout southern to central North America. Continuing Tien Shan intraplate deformation (Central Asia) has created an analogous array of uplifts and basins in response to the collision of India with Eurasia, beginning in late Miocene time when full coupling of the colliding plates had occurred. As in the Laurentia-Gondwana case, structures of similar magnitude and spacing to those in Eurasia have developed in the Indian plate. Within the present orogen two ancient suture zones have been reactivated—the early Paleozoic Terskey zone and the late Paleozoic Turkestan suture between the Siberian and East Gondwanan cratons. Inverted Proterozoic to early Paleozoic rift structures and passive-margin deposits are exposed north of the Terskey zone. In the Alay and Tarim complexes, Vendian to mid-Carboniferous passive-margin strata and the subjacent Proterozoic crystalline basement have been uplifted. Data on Tien Shan uplifts, basins, structural arrays, and deformation rates guide paleotectonic interpretations of ancient intraplate mountain belts. Similarly, exhumed deep crustal shear zones in the Ancestral Rockies offer insight into partitioning and reorientation of strain during contemporary intraplate deformation.

Hurricane Mountain Formation melange: history of Cambro-Ordovician accretion of the Boundary Mountains terrane within the northern Appalachian orthotectonic zone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boone, G.M.; Boudette, E.L.

1985-01-01

The Hurricane Mountain Formation (HMF) melange and associated ophiolitic and volcanogenic formations of Cambrian and lowermost Ordovician age bound the SE margin of the Precambrian Y (Helikian) Chain Lakes Massif in western Maine. HMF melange matrix, though weakly metamorphosed, contains a wide variety of exotic greenschist to amphibolite facies blocks as components of its polymictic assemblage, but blocks of high-grade cratonal rocks such as those of Chain Lakes or Grenville affinity are lacking. Formations of melange exposed in structural culminations of Cambrian and Ordovician rocks NE of the HMF in Maine and in the Fournier Group in New Brunswick aremore » lithologically similar and probably tectonically correlative with the HMF; taken together, they may delineate a common pre-Middle Ordovician tectonic boundary. The authors infer that the Hurricane Mountain and St. Daniel melange belts define the SE and NW margins of the Boundary Mountains accreted terrane (BMT), which may consist of cratonal basement of Chain Lakes affinity extending from eastern Gaspe (deBroucker and St. Julien, 1985) to north-central New Hampshire. The Laurentian continental margin, underlain by Grenville basement, underplated the NW margin of this terrane, marked by the SDF suture zone, in late Cambrian to early Ordovician time, while terranes marked by Cambrian to Tremadocian (.) lithologies dissimilar to the Boundary Mountains terrane were accreted to its outboard margin penecontemporaneously. The docking of the Boundary Mountains terrane and the initiation of its peripheral melanges are equated to the Penobscottian disturbance.« less

Hydrogeological influences on petroleum accumulations in the Arabian Gulf

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vizgirda, J.; Burke, L.

1995-08-01

The stratigraphic and topographic conditions in the Arabian Gulf are appropriate for the instigation and maintenance of an active hydrodynamic regime. The setting is that of a gentle basin surrounded by topographic highs. The central Arabian highlands to the west-southwest, the Tarus-Zagros mountains to the north, and the Oman mountains to the east rim the structural low occupied by the Gulf. Elevations in these areas reach maximum values of approximately 1000 meters. Paleozoic through Cenozoic strata stretch continuously across the basin, are relatively unfaulted, and outcrop in the topographic highs. Such a setting is propitious for a regional hydrodynamic systemmore » with meteoric recharge in the topographic highs and discharge in the middle of the Gulf. The prolific oil and gas accumulations of this region would be subject to influence by these hydrodynamic processes. The existence of such a hydrodynamic regime is documented by a variety of evidence, including potentiometric data, water salinity measurements, and observed tilts in oil-water contacts. Potentiometric data for several Tertiary and Cretaceous units on the Arabian platform, in the Gulf, and in Iraq show a pattern of consistently decreasing potential from topographic highs to lows. Water salinities show a consistent, but inverse, variation with the potentiometric data. Tilted oil-water contacts in Cretaceous and Jurassic reservoirs are observed in several fields of the Gulf region. The direction and magnitude of the observed tilts are consistent with the water potential and salinity data, and suggest that petroleum accumulations are being influenced by a regional hydrodynamic drive. Basin modelling is used to simulate petroleum generation and migration scenarios, and to integrate these histories with the structural evolution of the Gulf. The integrated modelling study illustrates the influence of hydrodynamic processes on the distribution of petroleum accumulations.« less

Mineral resources of the Raymond Mountain Wilderness Study Area, Lincoln county, Wyoming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lund, K.; Evans, J.P.; Hill, R.H.

1990-01-01

The paper reports on the Raymond Mountain Wilderness Study Area which encompasses most of the Sublette Range of western Lincoln County, Wyo. The study area consists of upper Paleozoic and Mesozoic sedimentary rocks that form part of the Idaho-Wyoming-Utah overthrust belt. There are no identified mineral or energy resources in the wilderness study area. The study area has moderate energy resource potential for oil and gas. Mineral resource potential for vanadium and phosphate is low because the Phosphoria Formation is deeply buried beneath the wilderness study area and contains unweathered units having low P{sub 2}O{sub 5} values. The mineral resourcemore » potential for coal, other metals, including uranium, high-purity limestone or dolostone, and geothermal energy is low.« less

Chemistry of water collected from an unventilated drift, Yucca Mountain, Nevada

USGS Publications Warehouse

Marshall, B.D.; Oliver, T.A.; Peterman, Z.E.

2007-01-01

Water samples (referred to as puddle water samples) were collected from the surfaces of a conveyor belt and plastic sheeting in the unventilated portion of the Enhanced Characterization of the Repository Block (ECRB) Cross Drift in 2003 and 2005 at Yucca Mountain, Nevada. The chemistry of these puddle water samples is very different than that of pore water samples from borehole cores in the same region of the Cross Drift or than seepage water samples collected from the Exploratory Studies Facility tunnel in 2005. The origin of the puddle water is condensation on surfaces of introduced materials and its chemistry is dominated by components of the introduced materials. Large CO2 concentrations may be indicative of localized chemical conditions induced by biologic activity. ?? 2007 Materials Research Society.

Geological development and Phanerozoic crustal accretion in the western segment of the southern Tien Shan (Kyrgyzstan, Uzbekistan and Tajikistan)

NASA Astrophysics Data System (ADS)

Brookfield, M. E.

2000-12-01

The Tien Shan form a high intracontinental mountain belt, lying north of the main India-Asia collision mountains, and consist of re-activated Paleozoic orogens. The western segment of the southern Tien Shan lies northwest of the Pamir and west of the Talas-Fergana fault. The stratigraphy, lithology, igneous and metamorphic petrology and geochemistry of this segment indicate that it was formed by the assembly of Lower Paleozoic arcs which developed into microcontinents with Upper Paleozoic mature shelf and slope clastic and carbonate sediments. Precambrian continental crust is confined to two small blocks along its southern margin. The bulk of the southern Tien Shan consists of ?Vendian to Silurian oceanic and slope clastic rocks, resting on oceanic lithosphere, and overlain by thick passive margin Devonian to mid-Carboniferous mature shelf clastics and carbonates. These are unconformably overlain by syn- and post-orogenic immature clastic sediments derived from mountains on the north formed by closure of a Carboniferus southern Tajik and a northern Vendian to Carboniferous Turkestan ocean with the southern Tien Shan microcontinent sandwiched between. Associated with these collisions are late Carboniferous to Permian intrusives, which form three south to north (though overlapping) suites; a southern calc-alkaline granodiorite-granite suite, an intermediate gabbro-monzodiorite-granite suite, and a northern alkaline monzodiorite-granite-alaskite suite. The gabbro-monzodiorite-granite suite forms the earliest subduction-related magmatism of the southern Tien Shan: rare earth element patterns are consistent with derivation from a primitive or slightly enriched mantle. The other suites show more crustal contamination. Rb and Sr vary with depth and degree of partial melting and are consistent with progressive involvement of crustal material in partial melts during collision. The gradual change in composition within each complex, lasting in some cases from 295 to 250 Ma (the entire Permian), may be explained by a consecutive shift in the melting sedimentary cover of the subducting plate from oceanic crust through transitional crust to marginal continental crust. Like the Central Asian orogenic belt (the main focus of IGCP 420), the Tien Shan represent a net addition of continental crust during the Phanerozoic. Very little of the belt has any Precambrian precursor.

Deep crustal structure of the northeastern margin of the Arabian plate from seismic and gravity data

NASA Astrophysics Data System (ADS)

Pilia, Simone; Ali, Mohammed; Watts, Anthony; Keats, Brook; Searle, Mike

2017-04-01

The United Arab Emirates-Oman mountains constitute a 700 km long, 50 km wide compressional orogenic belt that developed during the Cainozoic on an underlying extensional Tethyan rifted margin. It contains the world's largest and best-exposed thrust sheet of oceanic crust and upper mantle (Semail Ophiolite), which was obducted onto the Arabian rifted continental margin during the Late Cretaceous. Although the shallow structure of the UAE-Oman mountain belt is reasonably well known through the exploitation of a diverse range of techniques, information on deeper structure remains little. Moreover, the mechanisms by which dense oceanic crustal and mantle rocks are emplaced onto less dense and more buoyant continental crust are still controversial and remain poorly understood. The focus here is on an active-source seismic and gravity E-W transect extending from the UAE-mountain belt to the offshore. Seismic refraction data were acquired using the survey ship M/V Hawk Explorer, which was equipped with a large-volume airgun array (7060 cubic inches, 116 liters). About 400 air gun shots at 50-second time interval were recorded on land by eight broadband seismometers. In addition, reflection data were acquired at 20 seconds interval and recorded by a 5-km-long multichannel streamer. Results presented here include an approximately 85 km long (stretching about 35 km onshore and 50 km offshore) P-wave velocity crustal profile derived by a combination of forward modelling and inversion of both diving and reflected wave traveltimes using RAYINVR software. We employ a new robust algorithm based on a Monte Carlo approach (VMONTECARLO) to address the velocity model uncertainties. We find ophiolite seismic velocities of about 5.5 km/s and a thick sedimentary package in the offshore. Furthermore, the velocity model reveals a highly stretched crust with the Moho discontinuity lying at about 20 km. A prestack depth-migrated profile (about 50 km long) coincident with the offshore part of the refraction profile shows a thick sequence (up to about 10 km) of seaward dipping sediments that are offset by a number of listric (normal) faults, some of which intersect the seabed and so reflect recent tectonic activity. The trend of the Bouguer anomaly provides further constraints on the deeper structure of the margin and appears to confirm the presence of a stretched crust.

Synoptic conditions of fine-particle transport to the last interglacial Red Sea-Dead Sea from Nd-Sr compositions of sediment cores

NASA Astrophysics Data System (ADS)

Palchan, Daniel; Stein, Mordechai; Goldstein, Steven L.; Almogi-Labin, Ahuva; Tirosh, Ofir; Erel, Yigal

2018-01-01

The sediments deposited at the depocenter of the Dead Sea comprise high-resolution archive of hydrological changes in the lake's watershed and record the desert dust transport to the region. This paper reconstructs the dust transport to the region during the termination of glacial Marine Isotope Stage 6 (MIS 6; ∼135-129 ka) and the last interglacial peak period (MIS5e, ∼129-116 ka). We use chemical and Nd and Sr isotope compositions of fine detritus material recovered from sediment core drilled at the deepest floor of the Dead Sea. The data is integrated with data achieved from cores drilled at the floor of the Red Sea, thus, forming a Red Sea-Dead Sea transect extending from the desert belt to the Mediterranean climate zone. The Dead Sea accumulated flood sediments derived from three regional surface cover types: settled desert dust, mountain loess-soils and loess-soils filling valleys in the Dead Sea watershed termed here "Valley Loess". The Valley Loess shows a distinct 87Sr/86Sr ratio of 0.7081 ± 1, inherited from dissolved detrital calcites that originate from dried waterbodies in the Sahara and are transported with the dust to the entire transect. Our hydro-climate and synoptic conditions reconstruction illustrates the following history: During glacial period MIS6, Mediterranean cyclones governed the transport of Saharan dust and rains to the Dead Sea watershed, driving the development of both mountain soils and Valley Loess. Then, at Heinrich event 11, dry western winds blew Saharan dust over the entire Red Sea - Dead Sea transect marking latitudinal expansion of the desert belt. Later, when global sea-level rose, the Dead Sea watershed went through extreme aridity, the lake retreated, depositing salt and accumulating fine detritus of the Valley Loess. During peak interglacial MIS 5e, enhanced flooding activity flushed the mountain soils and fine detritus from all around the Dead Sea and Red Sea, marking a significant "contraction" of the desert belt. At the end of MIS 5e the effect of the regional precipitation diminished and the Dead Sea and Red Sea areas re-entered sever arid conditions with extensive salt deposition at the Dead Sea.

Carbon dioxide generation and drawdown during active orogenesis of siliciclastic rocks in the Southern Alps, New Zealand

NASA Astrophysics Data System (ADS)

Menzies, Catriona D.; Wright, Sarah L.; Craw, Dave; James, Rachael H.; Alt, Jeffrey C.; Cox, Simon C.; Pitcairn, Iain K.; Teagle, Damon A. H.

2018-01-01

Collisional mountain building influences the global carbon cycle through release of CO2 liberated by metamorphic reactions and promoting mechanical erosion that in turn increases chemical weathering and drawdown of atmospheric CO2. The Southern Alps is a carbonate-poor, siliciclastic mountain belt associated with the active Australian Pacific plate boundary. On-going, rapid tectonic uplift, metamorphism and hydrothermal activity are mobilising carbon. Here we use carbon isotope measurements of hot spring fluids and gases, metamorphic host rocks, and carbonate veins to establish a metamorphic carbon budget. We identify three major sources for CO2 within the Southern Alps: (1) the oxidation of graphite; (2) consumption of calcite by metamorphic reactions at the greenschist-amphibolite facies boundary, and (3) the dissolution of groundmass and vein-hosted calcite. There is only a minor component of mantle CO2 arising on the Alpine Fault. Hot springs have molar HCO3-/Ca2+ ∼9, which is substantially higher than produced by the dissolution of calcite indicating that deeper metamorphic processes must dominate. The total CO2 flux to the near surface environment in the high uplift region of the Southern Alps is estimated to be ∼6.4 × 108 mol/yr. Approximately 87% of this CO2 is sourced from coupled graphite oxidation (25%) and disseminated calcite decarbonation (62%) reactions during prograde metamorphism. Dissolution of calcite and mantle-derived CO2 contribute ∼10% and ∼3% respectively. In carbonate-rich orogens CO2 production is dominated by metamorphic decarbonation of limestones. The CO2 flux to the atmosphere from degassing of hot springs in the Southern Alps is 1.9 to 3.2 × 108 mol/yr, which is 30-50% of the flux to the near surface environment. By contrast, the drawdown of CO2 through surficial chemical weathering ranges between 2.7 and 20 × 109 mol/yr, at least an order of magnitude greater than the CO2 flux to the atmosphere from this orogenic belt. Thus, siliciclastic mountain belts like the Southern Alps are net sinks for atmospheric CO2, in contrast to orogens involving abundant carbonate rocks, such as the Himalaya, that are net CO2 sources.

Formation of fold and thrust belts on Venus due to horizontal shortening of a laterally heterogeneous lithosphere

NASA Technical Reports Server (NTRS)

Zuber, M. T.; Parmentier, E. M.; Neumann, G. A.

1994-01-01

An outstanding question relevant to understanding the tectonics of Venus is the mechanism of formation of fold and thrust belts, such as the mountain belts that surround Lakshmi Planum in western Ishtar Terra. These structures are typically long (hundreds of km) and narrow (many tens of km), and are often located at the margins of relatively high (km-scale) topographic rises. Previous studies have attempted to explain fold and thrust belts in various areas of Venus in the context of viscous and brittle wedge theory. However, while wedge theory can explain the change in elevation from the rise to the adjacent lowland, it fails to account for a fundamental aspect of the deformation, i.e., the topographic high at the edge of the rise. In this study we quantitatively explore the hypothesis that fold and thrust belt morphology on Venus can alternatively be explained by horizontal shortening of a lithosphere that is laterally heterogeneous, due either to a change in thickness of the lithosphere or the crust. Lateral heterogeneities in lithosphere structure may arise in response to thermal thinning or extensive faulting, while variations in crustal thickness may arise due to either spatially variable melting of mantle material or by horizontal shortening of the crust. In a variable thickness lithosphere or crust that is horizontally shortened, deformation will tend to localize in the vicinity of thickness heterogeneity, resulting in a higher component of dynamic topography there as compared to elsewhere in the shortening lithosphere. This mechanism may thus provide a simple explanation for the topographic high at the edge of the rise.

Formation of fold and thrust belts on Venus due to horizontal shortening of a laterally heterogeneous lithosphere

NASA Astrophysics Data System (ADS)

Zuber, M. T.; Parmentier, E. M.; Neumann, G. A.

1994-03-01

An outstanding question relevant to understanding the tectonics of Venus is the mechanism of formation of fold and thrust belts, such as the mountain belts that surround Lakshmi Planum in western Ishtar Terra. These structures are typically long (hundreds of km) and narrow (many tens of km), and are often located at the margins of relatively high (km-scale) topographic rises. Previous studies have attempted to explain fold and thrust belts in various areas of Venus in the context of viscous and brittle wedge theory. However, while wedge theory can explain the change in elevation from the rise to the adjacent lowland, it fails to account for a fundamental aspect of the deformation, i.e., the topographic high at the edge of the rise. In this study we quantitatively explore the hypothesis that fold and thrust belt morphology on Venus can alternatively be explained by horizontal shortening of a lithosphere that is laterally heterogeneous, due either to a change in thickness of the lithosphere or the crust. Lateral heterogeneities in lithosphere structure may arise in response to thermal thinning or extensive faulting, while variations in crustal thickness may arise due to either spatially variable melting of mantle material or by horizontal shortening of the crust. In a variable thickness lithosphere or crust that is horizontally shortened, deformation will tend to localize in the vicinity of thickness heterogeneity, resulting in a higher component of dynamic topography there as compared to elsewhere in the shortening lithosphere. This mechanism may thus provide a simple explanation for the topographic high at the edge of the rise.

An alternative model for the development of the allochthonous southern Appalachian Piedmont.

USGS Publications Warehouse

Zen, E.-A.

1981-01-01

The recent deep-seismic-reflection data across the S Appalachian Piedmont require rethinking of the tectonic relations in that area. Some of the traditional tectonic-lithostratigraphic belts of the Piedmont may be 'doubly allochthonous', that is, they may be terranes that are exotic mutually and with respect to the N American craton. These terranes may have been brought to the edge of the craton by plate-tectonic processes, in a manner similar to that proposed for the post-Triassic 'Wrangellia' in southeastern Alaska, and then obducted onto the craton as traditional thrust allochthons. If this idea is correct, then there is no compelling need for an intercontinental suture in the lower crust under the exposed southern Appalachian Piedmont; however, multiple sutures may obtain under the Coastal Plain overlap or farther off shore. The location of the Paleozoic Iapetus Ocean may also be off the present shore. The tectonic units now exposed in the Appalachian Piedmont not only may not be continuous with those of the N Appalachian region that have been considered by many authors to be the same on a cylindrical model but could have had different geologic origins. The nature of the ultramafic rocks spatially associated with the Kings Mountain belt and the Raleigh and Kiokee belts, as well as the paleomagnetic orientations of rocks of the various Piedmont belts, may provide useful tests for this microplate model.-Author

Accuracy Estimation of the Approximated Methods Used for Assessing Risk of Buildings Damage Under the Influence of Underground Exploitation in the Light of World's and Polish Experience - Part 2 / Analiza Dokładności Przybliżonych Metod Oceny Zagrożenia Budynków Wpływami Podziemnej Eksploatacji Stosowanych W Świecie I Polskiej Metody Punktowej - Część 2

NASA Astrophysics Data System (ADS)

Malinowska, Agnieszka

2013-09-01

This paper is a continuation of theoretical analyses of World's methods used for assessing damage risk to buildings with continuous strains, which were presented in Part 1. The authors focus only on those methods in which the scale of damage to buildings can be approximated. Selected methods were tested on 100 random objects sited in hard coal excavation-induced areas. The efficiency and effectiveness of those methods was evaluated. The damage risk was also verified with the use of a method currently used in Poland. The efficiency results obtained for World's methods and the one used in Poland turned out to be comparable. Practical studies were made to evaluate the adaptability of those methods in the underground exploitation-induced conditions in Poland. Artykuł stanowi kontynuację badań teoretycznych zaprezentowanych w części pierwszej, dotyczących oceny możliwości wykorzystania metod stosowanych na świecie do oceny zagrożenia budynków deformacjami ciągłymi. Skoncentrowano się jedynie na metodach pozwalających na przybliżoną ocenę stopnia uszkodzenia obiektów. Wybrane metody przetestowano na 100 losowo wybranych obiektach z terenu poddanego wpływom eksploatacji węgla kamiennego. Przyjęty tok postępowania pozwolił na ocenę efektywności oraz skuteczności tych metod. Ocenę zagrożenia budynków przeprowadzono również przy wykorzystaniu metody stosowanej obecnie w Polsce. Wyniki ewaluacji zagrożenia metodami światowymi można było porównać z efektywnością Polskiej metody. Badania praktyczne pozwoliły na ocenę możliwości adaptacji tych metod w warunkach eksploatacji podziemnej w Polsce.

Al Qaeda and Affiliates: Historical Perspective, Global Presence, and Implications for U.S. Policy

DTIC Science & Technology

2010-02-05

mountainous tribal belt of northwest Pakistan, where it continues to train operatives, recruit, and disseminate propaganda. But Al Qaeda franchises or...April 2005 to U.S. charges of involvement in the September 11 plot, apparently visited Malaysia and met with cell members in 2000. Additionally, the...Qaeda leader, Malaysia was viewed as an ideal location for transiting and meeting because it allowed visa-free entry to citizens of most Gulf states

A Geological and Geophysical Information System for the Middle East and North Africa,

DTIC Science & Technology

1995-08-14

Saad, D., Sawaf, T., and Gebran, A., 1990, Bouguer gravity trends and crustal structure of the Palmyride Mountain belt and surrounding northern Arabian ...that occurred between 1977 and 1992 (Figure 2). We have finished compiling a crustal scale Bouguer gravity data for Syria, Israel and Lebanon (Figure...3). This Bouguer gravity database is a part of our attempt to form a uniform grided Bouguer gravity data set for the entire Middle East, which then

43. INTERIOR VIEW, CRUSHING ADDITION. THE SYMONS VIBRATING SCREEN SITS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

43. INTERIOR VIEW, CRUSHING ADDITION. THE SYMONS VIBRATING SCREEN SITS ON TOP OF THE PLATFORM. OVERSIZE ORE IS FED BY CHUTE TO THE GYRATORY SECONDARY CRUSHER (MISSING) SITTING ON CONCRETE FOUNDATIONS TO LOWER RIGHT. UNDERSIZE ORE WAS FED BY THE LOWER CHUTE (CENTER LEFT) TO THE 24 INCH BELT CONVEYOR UNDER THE SECONDARY CRUSHER. THE DRYER ROOM IS BEYOND. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Research into Surface Wave Phenomena in Sedimentary Basins.

DTIC Science & Technology

1981-12-31

150 km of the southerly extension of the Overthrust Belt, 350 km of the Green River Basin paralleling the Uinta Mountains and 150 km across the Front...WEIDLINGER ASSOCIATES O300 SAND HiLL ROAD BUILDING 4, SUITE 245 MENLO PARK, CALIFORNIA 9462 RESEARCH INTO SURFACE WAVE PHENOMENA IN SEDIMENTARY BASINS BY...PARK, CALIFORNIA 94025 ! I RESEARCH INTO SURFACE WAVE PHENOMENA IN SEDIMENTARY BASINS I Dy G.L. Wojcik J. Isenberg F. Ma E. Richardson Prepared for

[Modeling of species distribution using topography and remote sensing data, with vascular plants of the Tukuringra Range low mountain belt (Zeya state Nature Reserve, Amur Region) as a case study].

PubMed

Dudov, S V

2016-01-01

On the basis of maximum entropy method embedded in MaxEnt software, the cartographic models are designed for spatial distribution of 63 species of vascular plants inhabiting low mountain belt of the Tukuringra Range. Initial data for modeling were actual points of a species occurrence, data on remote sensing (multispectral space snapshots by Landsat), and a digital topographic model. It is found out that the structure of factors contributing to the model is related to species ecological amplitude. The distribution of stenotopic species is determined, mainly, by the topography, which thermal and humidity conditions of habitats are associated with. To the models for eurytopic species, variables formed on the basis of remote sensing contribute significantly, those variables encompassing the parameters of the soil-vegetable cover. In course of the obtained models analyzing, three principal groups of species are revealed that have similar distribution pattern. Species of the first group are restricted in their distribution by the slopes of the. River Zeya and River Giluy gorges. Species of the second group are associated with the southern macroslope of the range and with southern slopes of large rivers' valleys. The third group incorporates those species that are distributed over the whole territory under study.

Paleoseismology of a newly discovered scarp in the Yakima fold-and-thrust belt, Kittitas County, Washington

USGS Publications Warehouse

Barnett, Elizabeth A.; Sherrod, Brian L.; Norris, Robert; Gibbons, Douglas

2013-01-01

The Boylston Mountains anticlinal ridge is one of several that are cored by rocks of the Columbia River Basalt Group and, with the interceding synclinal valleys, constitute the Yakima fold-and-thrust belt of central Washington. Lidar data acquired from the U.S. Army's Yakima Training Center reveal a prominent, northwest-side-up, 65°- to 70°-trending, 3- to 4-meter-high scarp that cuts across the western end of the Boylston Mountains, perpendicular to the mapped anticline. The scarp continues to the northeast from the ridge on the southern side of Park Creek and across the low ridges for a total length of about 3 kilometers. A small stream deeply incises its flood plain where it projects across Johnson Canyon. The scarp is inferred to be late Quaternary in age based on its presence on the modern landscape and the incised flood-plain sediments in Johnson Canyon. Two trenches were excavated across this scarp. The most informative of the two, the Horned Lizard trench, exposed shallow, 15.5-Ma Grande Ronde Basalt, which is split by a deep, wide crack that is coincident with the base of the scarp and filled with wedges of silty gravels that are interpreted to represent at least two generations of fault colluvium that offset a buried soil.

Modelling melting in crustal environments, with links to natural systems in the Nepal Himalayas

NASA Astrophysics Data System (ADS)

Isherwood, C.; Holland, T.; Bickle, M.; Harris, N.

2003-04-01

Melt bodies of broadly granitic character occur frequently in mountain belts such as the Himalayan chain which exposes leucogranitic intrusions along its entire length (e.g. Le Fort, 1975). The genesis and disposition of these bodies have considerable implications for the development of tectonic evolution models for such mountain belts. However, melting processes and melt migration behaviour are influenced by many factors (Hess, 1995; Wolf &McMillan, 1995) which are as yet poorly understood. Recent improvements in internally consistent thermodynamic datasets have allowed the modelling of simple granitic melt systems (Holland &Powell, 2001) at pressures below 10 kbar, of which Himalayan leucogranites provide a good natural example. Model calculations such as these have been extended to include an asymmetrical melt-mixing model based on the Van Laar approach, which uses volumes (or pseudovolumes) for the different end-members in a mixture to control the asymmetry of non-ideal mixing. This asymmetrical formalism has been used in conjunction with several different entropy of mixing assumptions in an attempt to find the closest fit to available experimental data for melting in simple binary and ternary haplogranite systems. The extracted mixing data are extended to more complex systems and allow the construction of phase relations in NKASH necessary to model simple haplogranitic melts involving albite, K-feldspar, quartz, sillimanite and {H}2{O}. The models have been applied to real bulk composition data from Himalayan leucogranites.

Spatial and temporal variation of Cenozoic surface elevation in the Great Basin and Sierra Nevada

USGS Publications Warehouse

Horton, T.W.; Sjostrom, D.J.; Abruzzese, M.J.; Poage, M.A.; Waldbauer, J.R.; Hren, M.; Wooden, J.; Chamberlain, C.P.

2004-01-01

The surface uplift of mountain belts caused by tectonism plays an important role in determining the long-term climate evolution of the Earth. However, the general lack of information on the paleotopography of mountain belts limits our ability to identify the links and feedbacks between topography, tectonics, and climate change on geologic time-scales. Here, we present a ??18O and ??D record of authigenic minerals for the northern Great Basin that captures the timing and magnitude of regional surface uplift and subsidence events in the western United States during the Cenozoic. Authigenic calcite, smectite, and chert ??18O values suggest the northern Great Basin region experienced ???2km of surface uplift between the middle Eocene and early Oligocene followed by ???1 to 2km of surface subsidence in the southern Great Basin and/or Sierra Nevada since the middle Miocene. These data when combined with previously published work show that the surface uplift history varied in both space and time. Surface uplift migrated from north to south with high elevations in southern British Columbia and northeastern Washington in the middle Eocene and development of surface uplift in north and central Nevada in the Oligocene. This pattern of north to south surface uplift is similar to the timing of magmatism in the western Cordillera, a result that supports tectonic models linking magamtism with removal of mantle lithosphere and/or a subducting slab.

Functional traits predict relationship between plant abundance dynamic and long-term climate warming

PubMed Central

Soudzilovskaia, Nadejda A.; Elumeeva, Tatiana G.; Onipchenko, Vladimir G.; Shidakov, Islam I.; Salpagarova, Fatima S.; Khubiev, Anzor B.; Tekeev, Dzhamal K.; Cornelissen, Johannes H. C.

2013-01-01

Predicting climate change impact on ecosystem structure and services is one of the most important challenges in ecology. Until now, plant species response to climate change has been described at the level of fixed plant functional types, an approach limited by its inflexibility as there is much interspecific functional variation within plant functional types. Considering a plant species as a set of functional traits greatly increases our possibilities for analysis of ecosystem functioning and carbon and nutrient fluxes associated therewith. Moreover, recently assembled large-scale databases hold comprehensive per-species data on plant functional traits, allowing a detailed functional description of many plant communities on Earth. Here, we show that plant functional traits can be used as predictors of vegetation response to climate warming, accounting in our test ecosystem (the species-rich alpine belt of Caucasus mountains, Russia) for 59% of variability in the per-species abundance relation to temperature. In this mountain belt, traits that promote conservative leaf water economy (higher leaf mass per area, thicker leaves) and large investments in belowground reserves to support next year’s shoot buds (root carbon content) were the best predictors of the species increase in abundance along with temperature increase. This finding demonstrates that plant functional traits constitute a highly useful concept for forecasting changes in plant communities, and their associated ecosystem services, in response to climate change. PMID:24145400

Vivid valleys, pallid peaks? Hypsometric variations and rural-urban land change in the Central Peruvian Andes.

PubMed

Haller, Andreas

2012-11-01

What happens to the land cover within the hinterland's altitudinal belts while Central Andean cities are undergoing globalization and urban restructuring? What conclusions can be drawn about changes in human land use? By incorporating a regional altitudinal zonation model, direct field observations and GIS analyses of remotely sensed long term data, the present study examines these questions using the example of Huancayo Metropolitano - an emerging Peruvian mountain city of 420,000 inhabitants, situated at 3260 m asl in the Mantaro Valley. The study's results indicate that rapid urban growth during the late 1980s and early 1990s was followed by the agricultural intensification and peri-urban condominization at the valley floor ( quechua ) - since the beginning of Peru's neoliberal era. Moreover, regarding the adjoining steep slopes ( suni ) and subsequent grassland ecosystems ( puna ), the research output presents land cover change trajectories that clearly show an expansion of human land use, such as reforestation for wood production and range burning for livestock grazing, even at high altitudes - despite rural-urban migration trends and contrary to several results of extra-Andean studies. Consequently, rural-urban planners and policy makers are challenged to focus on the manifold impacts of globalization on human land use - at all altitudinal belts of the Andean city's hinterland: toward sustainable mountain development that bridges the social and physical gaps - from the bottom up.

Review: Natural tracers in fractured hard-rock aquifers in the Austrian part of the Eastern Alps—previous approaches and future perspectives for hydrogeology in mountain regions

NASA Astrophysics Data System (ADS)

Hilberg, Sylke

2016-08-01

Extensive in-depth research is required for the implementation of natural tracer approaches to hydrogeological investigation to be feasible in mountainous regions. This review considers the application of hydrochemical and biotic parameters in mountain regions over the past few decades with particular reference to the Austrian Alps, as an example for alpine-type mountain belts. A brief introduction to Austria's hydrogeological arrangement is given to show the significance of fractured hard-rock aquifers for hydrogeological science as well as for water supply purposes. A literature search showed that research concerning fractured hard-rock aquifers in Austria is clearly underrepresented to date, especially when taking the abundance of this aquifer type and the significance of this topic into consideration. The application of abiotic natural tracers (hydrochemical and isotope parameters) is discussed generally and by means of examples from the Austrian Alps. The potential of biotic tracers (microbiota and meiofauna) is elucidated. It is shown that the meiofauna approach to investigating fractured aquifers has not yet been applied in the reviewed region, nor worldwide. Two examples of new approaches in mountainous fractured aquifers are introduced: (1) use of CO2 partial pressure and calcite saturation of spring water to reconstruct catchments and flow dynamics (abiotic approach), and, (2) consideration of hard-rock aquifers as habitats to reconstruct aquifer conditions (biotic approach).

Deformation and kinematics of the central Kirthar Fold Belt, Pakistan

NASA Astrophysics Data System (ADS)

Hinsch, Ralph; Hagedorn, Peter; Asmar, Chloé; Nasim, Muhammad; Aamir Rasheed, Muhammad; Kiely, James M.

2017-04-01

The Kirthar Fold Belt is part of the lateral mountain belts in Pakistan linking the Himalaya orogeny with the Makran accretionary wedge. This region is deforming very oblique/nearly parallel to the regional plate motion vector. The study area is situated between the prominent Chaman strike-slip fault in the West and the un-deformed foreland (Kirthar Foredeep/Middle Indus Basin) in the East. The Kirthar Fold Belt is subdivided into several crustal blocks/units based on structural orientation and deformation style (e.g. Kallat, Khuzdar, frontal Kirthar). This study uses newly acquired and depth-migrated 2D seismic lines, surface geology observations and Google Earth assessments to construct three balanced cross sections for the frontal part of the fold belt. Further work was done in order to insure the coherency of the built cross-sections by taking a closer look at the regional context inferred from published data, simple analogue modelling, and constructed regional sketch sections. The Khuzdar area and the frontal Kirthar Fold Belt are dominated by folding. Large thrusts with major stratigraphic repetitions are not observed. Furthermore, strike-slip faults in the Khuzdar area are scarce and not observed in the frontal Kirthar Fold Belt. The regional structural elevation rises from the foreland across the Kirthar Fold Belt towards the hinterland (Khuzdar area). These observations indicate that basement-involved deformation is present at depth. The domination of folding indicates a weak decollement below the folds (soft-linked deformation). The fold pattern in the Khuzdar area is complex, whereas the large folds of the central Kirthar Fold Belt trend SSW-NNE to N-S and are best described as large detachment folds that have been slightly uplifted by basement involved transpressive deformation underneath. Towards the foreland, the deformation is apparently more hard-linked and involves fault-propagation folding and a small triangle zone in Cretaceous sediments. Shortening is in the order of 21-24% for the frontal structures. The deformation above the weak Eocene Ghazij shales is partly decoupled from the layers underneath, especially where the Ghazij shales are thick. Thus, not all structures visible at surface level in the Kirthar Fold Belt are also present in the deeper section, and vice versa (disharmonic folding). The structural architecture in the frontal central Kirthar Fold Belt shows only convergent structures nearly parallel to the regional plate motion vector of the Indian plate and thus represents an example of extreme strain partitioning.

Late Jurassic low latitude of Central Iran: paleogeographic and tectonic implications

NASA Astrophysics Data System (ADS)

Mattei, Massimo; Muttoni, Giovanni; Cifelli, Francesca

2014-05-01

The individual blocks forming present-day Central Iran are now comprised between the Zagros Neo-Tethys suture to the south and the Alborz Palaeo-Tethys suture to the north. At the end of the Palaeozoic, the Iranian blocks rifted away from the northern margin of Gondwana as consequence of the opening of the Neo-Tethys, and collided with Eurasia during the Late Triassic, giving place to the Eo-Cimmerian orogeny. From then on, the Iranian block(s) should have maintained European affinity. Modern generations of apparent polar wander paths (APWPs) show the occurrence in North American and African coordinates of a major and rapid shift in pole position (=plate shift) during the Middle-Late Jurassic. This so-called monster polar shift is predicted also for Eurasia from the North Atlantic plate circuit, but Jurassic data from this continent are scanty and problematic. Here, we present paleomagnetic data from the Kimmeridgian-Tithonian (Upper Jurassic) Garedu Formation of Iran. Paleomagnetic component directions of primary (pre-folding) age indicate a paleolatitude of deposition of 10°N ± 5° that is in excellent agreement with the latitude drop predicted for Iran from APWPs incorporating the Jurassic monster polar shift. We show that paleolatitudes calculated from these APWPs, used in conjunction with simple zonal climate belts, better explain the overall stratigraphic evolution of Iran during the Mesozoic.

Constraints on the Velocity Structure and Accommodation of Shortening in the Atlas Mountains (Morocco) from Travel-Time Inversion of Refraction/Wide Angle Reflection Seismic Data

NASA Astrophysics Data System (ADS)

Ayarza, P.; Carbonell, R.; Palomeras, I.; Levander, A.; Teixell, A.; Zelt, C. A.; Kchikach, A.

2013-12-01

The Atlas Mountains are an intra-continental Cenozoic orogenic belt located at the southern edge of the diffuse plate boundary zone separating Africa and Europe. Its western part, the Moroccan Atlas, has long been under the scope of geoscientists investigating the origin of its high topography, locally exceeding 4000 m. Geological studies indicate that this mountain belt has experienced low to moderate shortening (<24% from balanced sections) and that topography and shortening do not keep a direct relationship. Forward modelling of the SIMA (Seismic Imaging of the Moroccan Atlas) refraction/wide angle reflection seismic data suggests that the total orogenic shortening, is resolved at depth with a Moho offset and a limited lower crust duplication that defines a 40 km-deep root in the northern part of the central High Atlas. However, the shortening accomodated by this feature (50 km) exceeds that estimated with surface data, and the position of the root appears to the north of the highest topography. In order to achieve a better definition of the crust/mantle boundary and to outline a tectonic model more coherent with surface data, we have used the RAYINVR code to carry out travel-time inversion of the SIMA data set. Inversion results depict a small shift to the south of the crustal root, formerly positioned in the northern part of the High Atlas, and define a thrusted mantle wedge. A limited crustal imbrication also appears in the Middle Atlas. The new velocity model implies complex ray trajectories but provides a better travel-time fit between the observed and the calculated data. Also, the amount of shortening implied by the this model is in agreement with that estimated from geological cross-sections. The final crustal thickness, as yet not exceeding 40 km in the root zone and less than 35 km elsewhere, still implies the need of a significant contribution from the mantle to support the topography of the Atlas mountains

A new Late Cretaceous paleomagnetic pole from the Adel Mountains, west central Montana

NASA Astrophysics Data System (ADS)

Gunderson, Jay A.; Sheriff, Steven D.

1991-01-01

North America's apparent polar wander path has been poorly defined between the mid-Cretaceous and Paleocene reference pole positions. Existing data allowed 13° of apparent polar motion over about 22 m.y. (87-65 Ma) roughly coinciding with the beginning of Laramide deformation (˜80 Ma). We report on a paleomagnetic study of the Adel Mountain Volcanic rocks to refine the North American apparent polar wander path for this interval. The shonkinite rocks of the Adel Mountain Volcanic field are on the eastern edge of the Cretaceous-Paleocene fold and thrust belt; some of these structures disturb the western edge of the volcanic pile. We obtained two new K-Ar dates from the Adel rocks. One date, on biotite ( from a shonkinite dike that crosscuts most of the volcanic rocks, is 71.2±2.7 Ma. The other, a whole rock date from a flow deep in the volcanic pile, is 81.1±3.5 Ma. We collected six to nine paleomagnetic samples from each of 34 sites in roadcuts and natural outcrops of flows, dikes, and laccoliths. Positive fold and conglomerate tests, along with alternating field and thermal demagnetization, indicate that our characteristic remanent directions are primary magnetizations acquired before Late Cretaceous to Paleocene thrust belt deformation. Averaging the virtual geomagnetic poles from 26 reliable sites, all of normal polarity, yields a paleopole at 82.2°N, 209.9°E (α95 = 6.80°, k = 18.38). This pole is concordant with the Paleocene reference pole (82.0°N, 170.2°E, α95 = 3.5°, k = 18.6 (Diehl et al., 1983)) and is 11.6° from the Globerman and Irving (1988) mid-Cretaceous pole at 71°N, 196°E. The youngest information in the Cretaceous stillstand pole is from the Niobrara Formation (Shive and Frerichs, 1974) at about 85-89 Ma. If we take the average age of the Adel Mountain Volcanics to be 76 Ma, then ˜12° of apparent polar motion occurred between 87 Ma and 76 Ma. Thus, rapid apparent polar motion correlates well with the onset of Laramide deformation.

Interseismic coupling, seismic potential and earthquake recurrence on the southern front of the Eastern Alps (NE Italy)

NASA Astrophysics Data System (ADS)

Cheloni, Daniele; D'Agostino, Nicola; Selvaggi, Giulio

2014-05-01

The interaction of the African, Arabian, and Eurasia plates in the "greater" Mediterranean region yields to a broad range of tectonic processes including active subduction, continental collision, major continental strike-slip faults and "intra-plate" mountain building. In this puzzling region the convergence between Adria microplate and Eurasia plate is partly or entirely absorbed within the South-Eastern Alps, where the Adriatic lithosphere underthrusts beneath the mountain belt. Historical seismicity and instrumentally recorded earthquakes show thrust faulting on north-dipping low-angle faults in agreement with geological observations of active mountain building and active fold growing at the foothills of the South-Eastern Alps. In this study, we use continuous GPS observations to document the geodetic strain accumulation across the South-Eastern Alps (NE Italy). We estimate the pattern of interseismic coupling on the intra-continental collision north-dipping thrust faults that separate the Eastern Alps and the Venetian-Friulian plain using the back-slip approach and discuss the seismic potential and earthquake recurrence. Comparison between the rigid-rotation predicted motion and the shortening observed across the studied area indicates that the South-Eastern Alpine thrust front absorbs about 80% of the total convergence rate between the Adria microplate and Eurasia plate. The modelled thrust fault is currently locked from the surface to a depth of approximately 10 km. The transition zone between locked and creeping portions of the fault roughly corresponds with the belt of microseismicity parallel and to the north of the mountain front. The estimated moment deficit rate is 1.27±0.14×10^17 Nm/yr. The comparison between the estimated moment deficit and that released historically by the earthquakes suggests that to account for the moment deficit the following two factors or their combination should be considered: (1) a significant part of the observed interseismic coupling is released aseismically by folding or creeping; (2) infrequent "large" events with long return period (>1000 years) and with magnitudes larger than the value assigned to the largest historical events (Mw≡6.7).

Canopy Density Mapping on Ultracam-D Aerial Imagery in Zagros Woodlands, Iran

NASA Astrophysics Data System (ADS)

Erfanifard, Y.; Khodaee, Z.

2013-09-01

Canopy density maps express different characteristics of forest stands, especially in woodlands. Obtaining such maps by field measurements is so expensive and time-consuming. It seems necessary to find suitable techniques to produce these maps to be used in sustainable management of woodland ecosystems. In this research, a robust procedure was suggested to obtain these maps by very high spatial resolution aerial imagery. It was aimed to produce canopy density maps by UltraCam-D aerial imagery, newly taken in Zagros woodlands by Iran National Geographic Organization (NGO), in this study. A 30 ha plot of Persian oak (Quercus persica) coppice trees was selected in Zagros woodlands, Iran. The very high spatial resolution aerial imagery of the plot purchased from NGO, was classified by kNN technique and the tree crowns were extracted precisely. The canopy density was determined in each cell of different meshes with different sizes overlaid on the study area map. The accuracy of the final maps was investigated by the ground truth obtained by complete field measurements. The results showed that the proposed method of obtaining canopy density maps was efficient enough in the study area. The final canopy density map obtained by a mesh with 30 Ar (3000 m2) cell size had 80% overall accuracy and 0.61 KHAT coefficient of agreement which shows a great agreement with the observed samples. This method can also be tested in other case studies to reveal its capability in canopy density map production in woodlands.

Western Ishtar Terra and Lakshmi Planum, Venus - Models of formation and evolution

NASA Astrophysics Data System (ADS)

Roberts, Kari M.; Head, James W.

1990-08-01

Regional geologic mapping and gravity data reveal a variety of characteristics that must be accounted for in models for the formation and evolution of Western Ishtar Terra and Lakshmi Planum, including: (1) high elevation, (2) plateau-shaped profile, (3) abnormally steep bounding slopes, (4) foredeeps, (5) polygonal outline, (6) adjacent orogenic belts, (7) volcanic plains, (8) plains emplaced synchronously with orogenic belts, (9) paterae, (10) variable topography of Lakshmi, (11) tessera-like material underlying Lakshmi, and (12) a large apparent depth of compensation. A tessera/peripheral deformation model, in which a preexisting block of tessera is the locus of convergence of adjacent thinner crust and lithosphere, underthrusting, mountain building, subsurface melting, and plateau uplift, is interpreted to account for most of the characteristics. The aparent depth of compensation is not simply explained by this model and appears to require a second, deeper mantle anomaly component, such as broad mantle upwelling or a hot spot.

Venus geology

NASA Astrophysics Data System (ADS)

McLaughlin, W. I.

1991-05-01

The Magellan mission to Venus is reviewed. The scientific investigations conducted by 243-day cycles encompass mapping with a constant incidence angle for the radar, observing surface changes from one cycle to the next, and targeting young-looking volcanos. The topography of Venus is defined by the upper boundary of the crust and upwelling from lower domains. Tectonic features such as rift zones, linear mountain belts, ridge belts, and tesserae are described. The zones of tesserae are unique to the planet. Volcanism accounts for about 80 percent of the observed surface, the remainder being volcanic deposits which have been reworked by tectonism or impacts. Magellan data reveal about 900 impact craters with flow-like ejecta resulting from the fall of meteoroids. It is concluded that the age of the Venusian surface varies between 0 and 800 million years. Tectonic and volcanic activities dominate the formation of the Venus topography; such processes as weathering and erosion are relatively unimportant on Venus.

Ambient tremors in a collisional orogenic belt

USGS Publications Warehouse

Chuang, Lindsay Yuling; Chen, Kate Huihsuan; Wech, Aaron G.; Byrne, Timothy; Peng, Wei

2014-01-01

Deep-seated tectonic tremors have been regarded as an observation tied to interconnected fluids at depth, which have been well documented in worldwide subduction zones and transform faults but not in a collisional mountain belt. In this study we explore the general features of collisional tremors in Taiwan and discuss the possible generation mechanism. In the 4 year data, we find 231 ambient tremor episodes with durations ranging from 5 to 30 min. In addition to a coseismic slip-induced stress change from nearby major earthquake, increased tremor rate is also highly correlated with the active, normal faulting earthquake swarms at the shallower depth. Both the tremor and earthquake swarm activities are confined in a small, area where the high attenuation, high thermal anomaly, the boundary between high and low resistivity, and localized veins on the surfaces distributed, suggesting the involvement of fluids from metamorphic dehydration within the orogen.

Southwest U. S. -East Antarctic (SWEAT) connection: A hypothesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moores, E.M.

A hypothesis for a late Precambrian fit of western North America with the Australia-Antarctic shield region permits the extension of many features through Antarctica and into other parts of Gondwana. Specifically, the Grenville orogen may extend around the coast of East Antarctica into India and Australia. The Wopmay orogen of northwest Canada may extend through eastern Australia into Antarctica and thence beneath the ice to connect with the Yavapai-Mazatzal orogens of the southwestern US. The ophiolitic belt of the latter may extend into East Antarctica. Counterparts of the Precambrian-Paleozoic sedimentary rocks along the US Cordilleran miogeocline may be present inmore » the Transantarctic Mountains. Orogenic belt boundaries provide useful piercing points for Precambrian continental reconstructions. The model implies that Gondwana and Laurentia rifted away from each other on one margin and collided some 300 m.y. later on their opposite margins to from the Appalachians.« less

[Maples at the sub-Alpine vegetation belt: a long history].

PubMed

David, F; Barbero, M

2001-02-01

Pollen analysis was carried out on lacustrine sediment of a small hollow (15 m x 25 m) at the treeless sub-Alpine belt (202 m) of the inner Maurienne valley in the northern French Alps. A 2,500-year-long maple settlement was demonstrared. Three AMS dates of terrestrial plant macroremains support the chronology. First, Betula and Salix spread prior to 9,000 C14 BP. The first pollen grains of Acer, Abies and Pinus cembra are quoted at 8,600 C14 BP. High frequencies of Alnus glutinosa/incana (20%) and Acer (10%) show that mixed communities of Acer and Alnus persisted above the mountainous Abies forest between 7,490 and 5,850 C14 BP. After 5,850 C14 BP, the decrease in Acer stands could be attributed to fire as suggested by the strong increase in Betula and by the delayed expansion of Pinus cembra.

Snowpack Variation and Hydrologic Impacts across the Middle East and North Africa

NASA Astrophysics Data System (ADS)

Robinson, D. A.; Ward, M. N.

2017-12-01

The Middle East is a region historically sensitive to climate variability and change, and contains snowpacks that have been shown to be important inputs to key regional water resources, including the Tigris-Euphrates river system. Focusing on the Middle East (and the smaller snowpacks of northwestern Africa), this presentation aims to (i) quantify each year's snowpack development and recession over recent decades, highlighting interannual to decadal variability, and (ii) advance understanding on the connection between the snowpack variations and aspects of regional hydrology. The presentation draws on satellite-based products, station data, and model reanalyses. Variation is summarized using space-time statistical techniques, as well as simpler regional indices: Northwestern Iran / Southern Caucasus (NWIC, includes Zagros Mountains); Eastern Turkey (ETKY, includes Taurus Mountains); and smaller scale indices for Lebanon and the Atlas Mountains. The Interactive Multisensor Snow and Ice Mapping System archives daily snow cover extent at 24 km resolution for 1999-present (primarily from visible satellite imagery). These data show that for both NWIC and ETKY, the mean snow extent peaks in late January with substantial coverage ( 300,000 km2 in each region), contracting to near zero by late June. A very large mid-winter interannual variance is also shown, implying substantial variation in hydrologic impacts during spring melt. Variability and decadal trends are compared with station snow depth reports (Global Historical Climatology Network - Daily). Strong agreement gives confidence in data quality, as well as, indicating high covariation of depth and extent. The connection with hydrologic impacts is investigated using reanalysis products, including the Global Land Data Assimilation System V2, which for the Middle East, shows broad agreement with observed maximum snow extent and spring retreat. The connections internal to the reanalysis between snow cover, melt and runoff are quantified, delivering insights into the mechanisms of variability and change in the regional water resources and their dependence on snowpack. Specific case study melt seasons highlight the ways in which snowpack and seasonal climate combine to produce changes in magnitude and timing of runoff during late winter and spring.

51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

51. VIEW OF CRUSHER ADDITION FROM EAST. SHOWS BAKER COOLER AT LOWER LEFT, AND FOUNDATIONS FOR ROD MILL BETWEEN COOLER AND STEPHENS-ADAMSON INCLINED BUCKET ELEVATOR. THE BELT CONVEYOR TO RIGHT OF ELEVATOR FED ELEVATOR FROM ROD MILL. 100-TON ORE BIN AND DUST COLLECTOR IS BEHIND FRAMING BENT. NOTE CONVEYOR EMERGING FROM BOTTOM OF ORE BIN, THIS AND THE INCLINED ELEVATOR FED THE SYMONS SCREEN (MISSING). - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

New evidence for global tectonic zones on Venus

NASA Technical Reports Server (NTRS)

Kozak, Richard C.; Schaber, Gerald G.

1989-01-01

Venera 15 and 16 spacecraft images show clear evidence of major crustal disruptions on Venus which have been interpreted to indicate crustal divergence. Complementary to the divergent zones are mountain belts that border the continent-like high terrains. The requisite transcurrent motions appear to be manifested as diffuse shear zones. The rift zones form an interconnected transpolar system which ties in with previously recognized equatorial disruption zones, suggesting a global tectonic network. Several independent lines of evidence suggest that the tectonism may be geologically young.

Co1 DNA supports conspecificity of Geomyphilus pierai and G. barrerai (Coleoptera, Scarabaeidae, Aphodiinae) and is a good marker for their phylogeographic investigation in Mexican mountains

PubMed Central

Arriaga-Jiménez, Alfonsina; Roy, Lise

2015-01-01

Abstract Members of Geomyphilus are associated with rodent burrows, such as pocket gophers and prairie dogs. In Mexico, they are found in the mountains of the Mexican Volcanic Belt and in Sierra Madre Oriental. Our study aims to initiate the exploration of the dispersal modes of Geomyphilus pierai and Geomyphilus barrerai from burrows of pocket gophers. In order to estimate the dispersal scale of the beetles, the utility of mitochondrial and nuclear molecular markers for studying the phylogeographic structure of this complex of species (Geomyphilus pierai and Geomyphilus barrerai) was tested from 49 beetle individuals. High intraspecific and intra-mountain nucleotidic diversity was captured from this sample using Co1 mitochondrial sequences, whilst the ITS2 nuclear ribosomal sequence did not allow observing informative variation. Mitochondrial phylogenetic analysis revealed that the specific delineation between the two species under study was doubtful. In this preliminary study, Co1 was shown to be a good marker for elucidating dispersal routes of the burrowing rodent-associated beetles. PMID:26257561

Impact of GRM: New evidence from the Soviet Union

NASA Technical Reports Server (NTRS)

Mcnutt, M.

1985-01-01

Gravity information released by the Soviet Union allows the quantitative assessment of how the geopotential research mission (GRM) mission might effect the ability to use global gravity data for continental tectonic interpretation. The information is of an isostatic response spectra for eight individual tectonic units in the USSR. The regions examined include the Caroathians, Caucasus, Urals, Pamirs, Tien-Shan, Altal, Chersky Ridge, and East Siberian Platform. The 1 deg x 1 deg gravity data are used to calculate the admittances are used in two different sorts of tectonic studies of mountain belts in the USSR: (1) interpretation of isostatic responses in terms of plate models of compensation for mountainous terrain. Using geologic information concerning time of the orogeny, lithospheric plates involved, and polarity of subduction in collision zones, they convert the best-fitting flexural rigidity to an elastic plate thickness for the lithospheric plate inferred to underlie the mountains; the isostatic admittance functions is an attempt to directly model gravity and topography data for a few select regions in the Soviet Union. By knowing the value of the expected correlation between topography and gravity from the admittances, the Artemjev's map in mountainous areas can be calibrated, and the maps are converted back to Bouguer gravity. This procedure is applied to the Caucasus and southern Urals.

Deep structure of the Alborz Mountains by joint inversion of P receiver functions and dispersion curves

NASA Astrophysics Data System (ADS)

Rastgoo, Mehdi; Rahimi, Habib; Motaghi, Khalil; Shabanian, Esmaeil; Romanelli, Fabio; Panza, Giuliano F.

2018-04-01

The Alborz Mountains represent a tectonically and seismically active convergent boundary in the Arabia - Eurasia collision zone, in western Asia. The orogenic belt has undergone a long-lasted tectono-magmatic history since the Cretaceous. The relationship between shallow and deep structures in this complex tectonic domain is not straightforward. We present a 2D velocity model constructed by the assemblage of 1D shear wave velocity (Vs) models from 26 seismic stations, mainly distributed along the southern flank of the Alborz Mountains. The shear wave velocity structure has been estimated beneath each station using joint inversion of P-waves receiver functions and Rayleigh wave dispersion curves. A substantiation of the Vs inversion results sits on the modeling of Bouguer gravity anomaly data. Our velocity and density models show low velocity/density anomalies in uppermost mantle of western and central Alborz at a depth range of ∼50-100 km. In deeper parts of the uppermost mantle (depth range of 100-150 km), a high velocity/density anomaly is located beneath most of the Mountain range. The spatial pattern of these low and high velocity/density structures in the upper mantle is interpreted as the result of post collisional delamination of lower part of the western and central Alborz lithosphere.

Thrust-ridge paleodepositional model for the Upper Freeport coal bed and associated clastic facies, Upper Potomac coal field, Appalachian Basin, U.S.A.

USGS Publications Warehouse

Belt, Edward S.; Lyons, P.C.

1990-01-01

Two differential depositional sequences are recognized within a 37-m-thick lowermost section of the Conemaugh Group of Late Pennsylvanian (Westphalian D) age in the southern part of the Upper Potomac coal field (panhandle of Maryland and adjacent West Virginia). The first sequence is dominated by the Upper Freeport coal bed and zone (UF); the UF consists of a complex of interfingered thick coal beds and mudrocks. The UF underlies the entire 500 km2 study area (approximately 40 km in a NE-SW direction). The second sequence is dominated by medium- to coarse-grained sandstone and pebbly sandstone. They were deposited in channel belts that cut into and interfingered laterally with mudrock and fine- to medium-grained sandstone facies of floodbasin and crevasse-lobe origin. Thin lenticular coals occur in the second sequence. Nowhere in the study area does coarse-grained sandstone similar to the sandstone of the channel belts of the second sequence occur within the UF. However, 20 km north of the study area, coarse channel belts are found that are apparently synchronous with the UF (Lyons et al., 1984). The southeastern margin of the study are is bounded by the Allegheny Front. Between it and the North Mountain thrust (75 km to the southeast), lie at least eight other thrusts of unknown extent (Wilson, 1887). All these thrusts are oriented northwest; Devonian and older strata are exposed at the surface between the Allegheny Front and the North Mountain thrust. A blind-thrust ridge model is proposed to explain the relation of the two markedly depositional sequences to the thrusts that lie to the southeast of the Upper Potomac coal field. This model indicates that thrust ridges diverted coarse clastics from entering the swamp during a period when the thick Upper Freeport peat accumulated. Anticlinal thrust ridges and associated depressions are envisioned to have developed parallel to the Appalachian orogen during Middle and early Late Pennsylvanian time. A blind thrust developed from one of the outboard ridges, and it was thrust farther outboard ahead of the main body of the orogen. Sediment derived from the orogen was diverted into a sediment trap inboard of the ridge (Fig. 1). The ridge prevented sediment from entering the main peat-forming swamp. Sediment shed from the orogen accumulated in the sediment trap was carried out of the ends of the trap by steams that occupied the shear zone at the ends of the blind-thrust ridge (Fig. 1). Remnants of blind-thrust ridges occurs in the Sequatchie Valley thrust and the Pine Mountain thrust of the southern Appalachians. The extent, parallel to the orogen, of the thick areally extensive UF coal is related to the length of the blind-thrust ridge that, in turn, controlled the spacing of the river-derived coarse clastics that entered the main basin from the east. Further tectonism caused the thrust plane to emerge to the surface of the blind-thrust ridge. Peat accumulation was then terminated by the rapid erosion of the blind-thrust ridge and by the release of trapped sediment behind it. The peat was buried by sediments from streams from closely spaced channel belts] with intervening floodbasins. The model was implications for widespread peat (coal) deposits that developed in tropical regions, a few hundred kilometers inland from the sea during Pennsylvanian time (Belt and Lyons, 1989). ?? 1990.

Lateral ramps in the folded Appalachians and in overthrust belts worldwide; a fundamental element of thrust-belt architecture

USGS Publications Warehouse

Pohn, Howard A.

2000-01-01

Lateral ramps are zones where decollements change stratigraphic level along strike; they differ from frontal ramps, which are zones where decollements change stratigraphic level perpendicular to strike. In the Appalachian Mountains, the surface criteria for recognizing the subsurface presence of lateral ramps include (1) an abrupt change in wavelength or a termination of folds along strike, (2) a conspicuous change in the frequency of mapped faults or disturbed zones (extremely disrupted duplexes) at the surface, (3) long, straight river trends emerging onto the coastal plain or into the Appalachian Plateaus province, (4) major geomorphic discontinuities in the trend of the Blue Ridge province, (5) interruption of Mesozoic basins by cross-strike border faults, and (6) zones of modern and probable ancient seismic activity. Additional features related to lateral ramps include tectonic windows, cross-strike igneous intrusions, areas of giant landslides, and abrupt changes in Paleozoic sedimentation along strike. Proprietary strike-line seismic-reflection profiles cross three of the lateral ramps that were identified by using the surface criteria. The profiles confirm their presence and show their detailed nature in the subsurface. Like frontal ramps, lateral ramps are one of two possible consequences of fold-and-thrust-belt tectonics and are common elements in the Appalachian fold-and-thrust belt. A survey of other thrust belts in the United States and elsewhere strongly suggests that lateral ramps at depth can be identified by their surface effects. Lateral ramps probably are the result of thrust sheet motion caused by continued activation of ancient cratonic fracture systems. Such fractures localized the transform faults along which the continental segments adjusted during episodes of sea-floor spreading.

Reworked crustal of early Paleozoic WuYi Orogen revealed by receiver function data

NASA Astrophysics Data System (ADS)

Wei, Y.; Duan, Y.; Tian, X.; Zhao, Y.

2017-12-01

Intraplate orogenic belt, which occurs at the rigid and undeformable plate interiors, is a distinct new type of orogen rather than an interplate or plate marginal orogenic belt, whose deformation occurs exclusively at plate margins. Therefore, intraplate orogenic belts are the most obvious exception to the plate-tectonic paradigm, they are uncommon in Earth's history. The early Paleozoic Wuyi orogen in South China is one of the few examples of intraplate orogen, and is a key to understanding the process of intraplate orogenesis and global early Paleozoic geodynamics. In this study, we select teleseismic records from 45 mobile linear seismic stations deployed in Wuyi Mountain and 58 permanent stations setting in Jiangxi and Fujian provinces, from January 2011 to December 2012, and calculate the crustal thickness and average crustal Vp/Vs ratio using the H-κ stacking method. The main results include the following: 1) the crustal average Poission's ratio shows an increase tendency from land to sea, the interior of Wuyi orogen belt with an low ration less than 0.23, and the coastline with high ration which is up to 0.28, which indicate a very heterogeneous crustal structure and composition in Wuyi orogen and coast belt. 2) the crustal thickness ranges 28-34 km and shows a tendency of thinning from inland to coast in the region of SE China margin, which maight mean the eastern Eurasia lithospheric is extension and thinning induced by the subducted paleo-Pacific slab. To conclusion, we assume that Wuyi orogen experienced upper crustal thickening, lower crust and lithosphere delamination during the early Paleozoic orogeny, and lithosphere extension in Mesozoic. This research is founded by the Natural Science Foundation of China (41174052 and 41604048).

How the structural architecture of the Eurasian continental margin affects the structure, seismicity, and topography of the south central Taiwan fold-and-thrust belt

NASA Astrophysics Data System (ADS)

Brown, Dennis; Alvarez-Marron, Joaquina; Biete, Cristina; Kuo-Chen, Hao; Camanni, Giovanni; Ho, Chun-Wei

2017-07-01

Studies of mountain belts worldwide show that along-strike changes are common in their foreland fold-and-thrust belts. These are typically caused by processes related to fault reactivation and/or fault focusing along changes in sedimentary sequences. The study of active orogens, like Taiwan, can also provide insights into how these processes influence transient features such as seismicity and topography. In this paper, we trace regional-scale features from the Eurasian continental margin in the Taiwan Strait into the south central Taiwan fold-and-thrust belt. We then present newly mapped surface geology, P wave velocity maps and sections, seismicity, and topography data to test the hypothesis of whether or not these regional-scale features of the margin are contributing to along-strike changes in structural style, and the distribution of seismicity and topography in this part of the Taiwan fold-and-thrust belt. These data show that the most important along-strike change takes place at the eastward prolongation of the upper part of the margin necking zone, where there is a causal link between fault reactivation, involvement of basement in the thrusting, concentration of seismicity, and the formation of high topography. On the area correlated with the necking zone, the strike-slip reactivation of east northeast striking extensional faults is causing sigmoidal offset of structures and topography along two main zones. Here basement is not involved in the thrusting; there is weak focusing of seismicity and localized development of topography. We also show that there are important differences in structure, seismicity, and topography between the margin shelf and its necking zone.

Flexural bending-induced plumelets and their seamounts in accretionary (Japanese-style) and collisional (Tethyan-style) orogenic belts

NASA Astrophysics Data System (ADS)

Hirano, N.; Dilek, Y.

2015-12-01

Seamounts and seamount chains are common in both the upper and lower plates of active subduction zones. Their OIB-type volcanic products are distinctly different from suprasubduction zone (arc, forearc and backarc) generated volcanic rocks in terms of their compositions and mantle sources. Tectonic accretion of such seamounts into the Japanese archipelago in the NW Pacific and into subduction-accretion complexes and active margins of continents/microcontinents within the Tethyan realm during the Cretaceous played a significant role in continental growth. Seamount assemblages comprise alkaline volcanic rocks intercalated with radiolarian and hemipelagic chert, and limestone, and may also include hypabyssal dolerite and gabbro intrusions. In the Tethyan orogenic belts these seamount rocks commonly occur as km-scale blocks in mélange units beneath the late Jurassic - Cretaceous ophiolites nappes, whereas on the Japanese islands they form discrete, narrow tectonic belts within the late Jurassic - Cretaceous accretionary prism complexes. We interpret some of these OIB occurrences in the Japanese and Tethyan mountain belts as asperities in downgoing oceanic plates that formed in <10 million years before their accretion. Their magmas were generated by decompressional melting of upwelling asthenosphere, without any significant mantle plume component, and were brought to the seafloor along deep-seated brittle fractures that developed in the flexed, downgoing lithosphere as it started bending near a trench. The modern occurrences of these "petit-spot volcanoes" are well established in the northwestern Pacific plate, off the coast of Japan. The proposed mechanism of the formation of these small seamounts better explains the lack of hotspot trails associated with their occurrence in the geological record. Magmatic outputs of such flexural bending-induced plumelets should be ubiquitious in the accretionary (Japanese-style) and collisional (Tethyan-style) orogenic belts.

Connecting the Bird's Head to the Bird's Body - Cenozoic arc magmatism extends along the length of New Guinea.

NASA Astrophysics Data System (ADS)

Webb, Max; White, Lloyd; Jost, Benjamin

2017-04-01

New Guinea has a long, complicated history of arc magmatism. The present day shape of the island (resembling that of a bird in flight) formed as a result of oblique convergence of the Pacific and Caroline/Philippine plates with the northward moving Australian plate. This convergence resulted in multiple collisions of island arcs with continental crust, representing a modern day analogue to ancient accretionary orogens. This complex geological history has formed four major tectonic belts; accreted Palaeogene island arcs, the New Guinea Mobile Belt, the New Guinea Fold Belt and a stable platform. These tectonic belts are drawn across most of New Guinea in major review papers. However, these tectonic belts are not generally considered to extend through to New Guinea's western most peninsula (the Bird's Head). We present new field evidence, together with new U-Pb zircon geochronology and geochemical analyses from rocks collected within the Bird's Head. These document Middle to Late Miocene intermediate to felsic volcanic rocks and associated granitoid intrusives that formed along an active continental margin. These are effectively the equivalent of the Maramuni arc and Freida River Complex in eastern New Guinea. Several, broadly Eocene island arcs composed of dominantly mafic volcanic rocks are also found in the Bird's Head. These island arcs accreted along the Bird's Head sometime after their initial formation, possibly coinciding with Middle to Late Miocene active continental margin magmatism and we consider them to be equivalents of the Cyclops Mountains arc in Central New Guinea. This work demonstrates that New Guinea's east-west terranes are more extensive than previously thought. This potentially has implications for locating future ore deposits and understanding the relative position of the Bird's Head with respect to the rest of New Guinea in major plate reconstructions.

First thermochronological constraints on the Cenozoic extension along the Balkan fold-thrust belt (Central Stara Planina Mountains, Bulgaria)

NASA Astrophysics Data System (ADS)

Kounov, Alexandre; Gerdjikov, Ianko; Vangelov, Dian; Balkanska, Eleonora; Lazarova, Anna; Georgiev, Stoyan; Blunt, Edward; Stockli, Daniel

2017-11-01

The Balkan fold-thrust belt, exposed in Bulgaria and north-east Serbia, is part of the north-east vergent segment of the bi-vergent Eastern Mediterranean Alpine orogen. It was formed during two distinct compressional stages; the first one lasted from the Middle Jurassic to the Early Cretaceous and the second from Late Cretaceous to the Paleogene. Although the compressional tectonic evolution of the Balkan fold-thrust belt since the Middle Jurassic and during most of the Mesozoic is relatively well studied, the final exhumation of the rocks of the belt during the Cenozoic has remained poorly understood. Here, we present the first thermochronological constraints, based on fission-track and [U-Th-(Sm)]/He analysis, showing that along the central part of the belt syn- to post-orogenic extension could have started as early as the middle Eocene. Low-temperature thermochronological analysis of samples collected from three areas reveals at least two phases of increased cooling and exhumation during the Cenozoic. The first exhumation phase took place between 44 and 30 Ma and appears to be related to the syn- to post-orogenic collapse coeval with the earliest Cenozoic extensional stage observed across the southern Balkan Peninsula. A period of relative quiescence (between 30 and 25 Ma) is followed by the next cooling stage, between 25 and 20 Ma, which appears to be related to late Oligocene to early Miocene crustal extension across the Balkan Peninsula. Extension accommodated by the late Miocene to Recent age Sub-Balkan Graben System does not appear to have produced exhumation of rocks from beneath 2-4 km depth, as it was not detected by the low-temperature thermochronological methods applied in this study.

Permanent GPS network around the bend of the Jura Arc: preliminary results

NASA Astrophysics Data System (ADS)

Sue, Christian; Walpersdorf, Andrea; Sakic, Pierre; Rabin, Mickael; Champagnac, Jean daniel

2014-05-01

The Jura Mountain, the westernmost belt of the alpine orogeny, is one of the best-studied orogenic arcs in the world. The Jura arc is a typical fold-and-thrust belt, with a main décollement thrust localized in the Triasic evaporites under the Jurassic-Cretaceous series. It is directly linked to the alpine orogenic wedge, especially in term of critical taper. It is supposed to be still active in collision mode, which would rise up the issue of its relation with the Alps to the East, currently undergoing post-orogenic gravitational potential adjustment. Nevertheless, its current activity and recent deformation remain a matter of debate, few neotectonic-related data being available in this area. The Jura is crosscut by left-lateral strike-slip faults in a radial scheme with respect to the arc, and recent seismicity along one of them, the Vuache fault (Annecy earthquake Ml 5.3 1996), and at the northern front of the belt (Beaume-les-Dames earthquake, Ml 5.1, 2004), argues for ongoing active deformation across the Jura Mountain. Here we present preliminary results of permanent GPS network surrounding the Jura belt (RENAG and RPG data), which tend to show very slow, yet self-consistent strain pattern of the order of some tenth of mm/yr over 100 km-long typical baselines, with shortening perpendicular to the arc, and extension parallel to its axial trend. We also characterize a slow uplift in the same order of magnitude, which appears to be correlated to the current uplift observed in the Alps. Indeed, the uplift velocities are continuously decreasing from the core of the Alps (+2 mm/yr) to the westernmost part of the Jura (+0,4 mm/yr) and to the stable foreland (-0.1 mm/yr). Actually, from the Po plain to the Jura foreland, the GPS-related uplift velocities are well correlated to the topography, and the Jura arc appears connected to the Alps from this point of view. In order to better determine the deformation pattern in the Jura arc, we present a new regional GNSS permanent network (GPS-JURA, Besançon observatory) developed at the end of 2013, which will allow in a near future to accurately characterize and quantify the current strain pattern of this emblematic arc.

Mesozoic and Cenozoic structural evolution of North Oman: New insights from high-quality 3D seismic from the Lekhwair area

NASA Astrophysics Data System (ADS)

Bazalgette, Loïc; Salem, Hisham

2018-06-01

This paper highlights the role of Triassic-Jurassic extension and late Cretaceous compression in the Mesozoic-Cenozoic (Alpine) structuring of North Oman. The syn/post-Mesozoic regional structural evolution is usually documented as a succession of two stages of deformation. The Alpine 1 phase, late Cretaceous in age, occurred in association with two ophiolite obduction stages (Semail and Masirah ophiolites). It was characterised by strike slip to extensional deformation in the North Oman foreland basin sub-surface. The Alpine 2 phase, Miocene in age, was related to the continental collision responsible for both the Zagros orogen and the uplift of the Oman Mountains. The Alpine 2 deformation was transpressional to compressional. Observation and interpretation of good quality 3D seismic in the Lekhwair High area enabled the distinction of two earlier phases. Early Mesozoic extension occurred concomitantly with the regional Triassic to Jurassic rifting, developing Jurassic-age normal faults. Late Cretaceous compression occurred prior to the main Alpine 1 phase and triggered the inversion of Jurassic-seated normal faults as well as the initiation of compressional folds in the Cretaceous overburden. These early phases have been ignored or overlooked as part of the North Oman history although they are at the origin of structures hosting major local and regional hydrocarbon accumulations.

Conceptualization of Karstic Aquifer with Multiple Outlets Using a Dual Porosity Model.

PubMed

Hosseini, Seiyed Mossa; Ataie-Ashtiani, Behzad

2017-07-01

In this study, two conceptual models, the classic reservoir (CR) model and exchange reservoirs model embedded by dual porosity approach (DPR) are developed for simulation of karst aquifer functioning drained by multiple outlets. The performances of two developed models are demonstrated at a less developed karstic aquifer with three spring outlets located in Zagros Mountain in the south-west of Iran using 22-years of daily data. During the surface recharge, a production function based on water mass balance is implemented for computing the time series of surface recharge to the karst formations. The efficiency of both models has been assessed for simulation of daily spring discharge during the recession and also surface recharge periods. Results indicate that both CR and DPR models are capable of simulating the ordinates of spring hydrographs which drainage less developed karstic aquifer. However, the goodness of fit criteria indicates outperformance of DPR model for simulation of total hydrograph ordinates. In addition, the DPR model is capable of quantifying hydraulic properties of two hydrologically connected overlapping continua conduits network and fissure matrix which lays important foundations for the mining operation and water resource management whereas homogeneous model representations of the karstic subsurface (e.g., the CR) do not work accurately in the karstic environment. © 2017, National Ground Water Association.

Ecological Speciation in Nolina parviflora (Asparagaceae): Lacking Spatial Connectivity along of the Trans-Mexican Volcanic Belt

PubMed Central

Ruiz-Sanchez, Eduardo; Specht, Chelsea D.

2014-01-01

The hypothesis of ecological speciation states that as populations diverge in different niches, reproductive isolation evolves as a by-product of adaptation to these different environments. In this context, we used Nolina parviflora as a model to test if this species evolved via ecological speciation and to explore current and historical gene flow among its populations. Nolina parviflora is a montane species endemic to Mexico with its geographical distribution restricted largely to the Trans-Mexican Volcanic Belt. This mountain range is one of the most complex geological regions in Mexico, having undergone volcanism from the mid-Miocene to the present. Ecologically, the Trans-Mexican Volcanic Belt possesses different types of vegetation, including tropical dry forest; oak, pine, pine-oak, and pine-juniper forests; and xerophytic scrub - all of which maintain populations of N. parviflora. Using species distribution models, climatic analyses, spatial connectivity and morphological comparisons, we found significant differences in climatic and morphological variables between populations of N. parviflora in two distinct Trans-Mexican Volcanic Belt regions (east vs. west). This could mean that the geographically isolated populations diverged from one another via niche divergence, indicating ecological speciation. Spatial connectivity analysis revealed no connectivity between these regions under the present or last glacial maximum climate models, indicating a lack of gene flow between the populations of the two regions. The results imply that these populations may encompass more than a single species. PMID:24905911

Ecological speciation in Nolina parviflora (Asparagaceae): lacking spatial connectivity along of the Trans-Mexican Volcanic Belt.

PubMed

Ruiz-Sanchez, Eduardo; Specht, Chelsea D

2014-01-01

The hypothesis of ecological speciation states that as populations diverge in different niches, reproductive isolation evolves as a by-product of adaptation to these different environments. In this context, we used Nolina parviflora as a model to test if this species evolved via ecological speciation and to explore current and historical gene flow among its populations. Nolina parviflora is a montane species endemic to Mexico with its geographical distribution restricted largely to the Trans-Mexican Volcanic Belt. This mountain range is one of the most complex geological regions in Mexico, having undergone volcanism from the mid-Miocene to the present. Ecologically, the Trans-Mexican Volcanic Belt possesses different types of vegetation, including tropical dry forest; oak, pine, pine-oak, and pine-juniper forests; and xerophytic scrub--all of which maintain populations of N. parviflora. Using species distribution models, climatic analyses, spatial connectivity and morphological comparisons, we found significant differences in climatic and morphological variables between populations of N. parviflora in two distinct Trans-Mexican Volcanic Belt regions (east vs. west). This could mean that the geographically isolated populations diverged from one another via niche divergence, indicating ecological speciation. Spatial connectivity analysis revealed no connectivity between these regions under the present or last glacial maximum climate models, indicating a lack of gene flow between the populations of the two regions. The results imply that these populations may encompass more than a single species.

Variable deep structure of a midcontinent fault and fold zone from seismic reflection: La Salle deformation belt, Illinois basin

USGS Publications Warehouse

McBride, J.H.

1997-01-01

Deformation within the United States mid-continent is frequently expressed as quasilinear zones of faulting and folding, such as the La Salle deformation belt, a northwest-trending series of folds cutting through the center of the Illinois basin. Seismic reflection profiles over the southern La Salle deformation belt reveal the three-dimensional structural style of deformation in the lower Paleozoic section and uppermost Precambrian(?) basement. Individual profiles and structural contour maps show for the first time that the folds of the La Salle deformation belt are underlain at depth by reverse faults that disrupt and offset intrabasement structure, offset the top of interpreted Precambrian basement, and accommodate folding of overlying Paleozoic strata. The folds do not represent development of initial dips by strata deposited over a preexisting basement high. Rather, the structures resemble subdued "Laramide-style" forced folds, in that Paleozoic stratal reflectors appear to be flexed over a fault-bounded basement uplift with the basement-cover contact folded concordantly with overlying strata. For about 40 km along strike, the dominant faults reverse their dip direction, alternating between east and west. Less well expressed antithetic or back thrusts appear to be associated with the dominant faults and could together describe a positive flower structure. The overall trend of this part of the La Salle deformation belt is disrupted by along-strike discontinuities that separate distinct fold culminations. Observations of dual vergence and along-strike discontinuities suggest an original deformation regime possibly involving limited transpression associated with distant late Paleozoic Appalachian-Ouachita mountain building. Moderate-magnitude earthquakes located west of the western flank of the La Salle deformation belt have reverse and strike-slip mechanisms at upper trustai depths, which might be reactivating deep basement faults such as observed in this study. The La Salle deformation belt is not necessarily typical of other well-known major midcontinent fault and fold zones, such as the Nemaha ridge, over which Paleozoic and younger sediments appear to simply be draped.

The Indosinian orogeny: A perspective from sedimentary archives of north Vietnam

NASA Astrophysics Data System (ADS)

Rossignol, Camille; Bourquin, Sylvie; Hallot, Erwan; Poujol, Marc; Dabard, Marie-Pierre; Martini, Rossana; Villeneuve, Michel; Cornée, Jean-Jacques; Brayard, Arnaud; Roger, Françoise

2018-06-01

The Triassic stratigraphic framework for the Song Da and the Sam Nua basins, north Vietnam, suffers important discrepancies regarding both the depositional environments and ages of the main formations they contain. Using sedimentological analyses and dating (foraminifer biostratigraphy and U-Pb dating on detrital zircon), we provide an improved stratigraphic framework for both basins. A striking feature in the Song Da Basin, located on the southern margin of the South China Block, is the diachronous deposition, over a basal unconformity, of terrestrial and marine deposits. The sedimentary succession of the Song Da Basin points to a foreland setting during the late Early to the Middle Triassic, which contrasts with the commonly interpreted rift setting. On the northern margin of the Indochina Block, the Sam Nua basin recorded the activity of a proximal magmatic arc during the late Permian up to the Anisian. This arc resulted from the subduction of a southward dipping oceanic slab that separated the South China block from the Indochina block. During the Middle to the Late Triassic, the Song Da and Sam Nua basins underwent erosion that led to the formation of a major unconformity, resulting from the erosion of the Middle Triassic Indosinian mountain belt, built after an ongoing continental collision between the South China and the Indochina blocks. Later, during the Late Triassic, as syn- to post-orogenic foreland basins in a terrestrial setting, the Song Da and Sam Nua basins experienced the deposition of very coarse detrital material representing products of the mountain belt erosion.

Vivid valleys, pallid peaks? Hypsometric variations and rural–urban land change in the Central Peruvian Andes

PubMed Central

Haller, Andreas

2012-01-01

What happens to the land cover within the hinterland's altitudinal belts while Central Andean cities are undergoing globalization and urban restructuring? What conclusions can be drawn about changes in human land use? By incorporating a regional altitudinal zonation model, direct field observations and GIS analyses of remotely sensed long term data, the present study examines these questions using the example of Huancayo Metropolitano – an emerging Peruvian mountain city of 420,000 inhabitants, situated at 3260 m asl in the Mantaro Valley. The study's results indicate that rapid urban growth during the late 1980s and early 1990s was followed by the agricultural intensification and peri-urban condominization at the valley floor (quechua) – since the beginning of Peru's neoliberal era. Moreover, regarding the adjoining steep slopes (suni) and subsequent grassland ecosystems (puna), the research output presents land cover change trajectories that clearly show an expansion of human land use, such as reforestation for wood production and range burning for livestock grazing, even at high altitudes – despite rural–urban migration trends and contrary to several results of extra-Andean studies. Consequently, rural–urban planners and policy makers are challenged to focus on the manifold impacts of globalization on human land use – at all altitudinal belts of the Andean city's hinterland: toward sustainable mountain development that bridges the social and physical gaps – from the bottom up. PMID:23564987

New approach to the boundary-parallel plastic / viscous diapiric flow patterns in the curvilinear boundary zones: an implication for structural geology studies

NASA Astrophysics Data System (ADS)

Sarkarinejad, Khalil

2010-05-01

New approach to the boundary-parallel plastic / viscous diapiric flow patterns in the curvilinear boundary zones: an implication for structural geology studies Khalil Sarkarinejad and Abdolreza Partabian Department of Earth Sciences, College of Sciences, Shiraz University, Shiraz, Iran (Sarkarinejad@geology.susc.ac.ir). In the oceanic diverging away plates, the asthenospheric flow at solidus high-temperature conditions typically produces mineral foliations and lineations in peridotites. Foliation and lineation of mantle are defined by preferred flattening and alignment of olivine, pyroxene and spinel. In the areas with steep foliations trajectories which are associated with the steeply plunging stretching lineation trajectories, reflecting localized vertical flow and has been related to mantle diapir. The mantle flow patterns are well documented through detail structural mapping of the Neyriz ophiolite along the Zagros inclined dextral transpression and Oman ophiolite. Such models of the diverging asthenaspheric mantle flow and formation of mantle diapir are rarely discussed and paid any attention in the mathematical models of transpressional deformation in converging continental crusts. Systematic measurements of the mineral preferred orientations and construction of the foliation and lineation trajectories of the Zagros high-strain zone reveal two diapers with the shape of the inclined NW-SE boundary-parallel semi-ellipses shape and one rotated asymmetric diapir. These diapers made of quartzo-feldspathic gneiss and garnet amphibolite core with phyllite, phyllonite, muscovite schist and deformed conglomerate as a cover sequences. These boundary-parallel and rotated diapirs are formed by the interaction of Afro-Arabian lower to middle continental detachment and hot subdacting Tethyan oceanic crust, due to increasing effective pressure and temperature. The plastic/viscous gneissic diapers were squeezed between in Zagros transpression curvilinear boundary zones in an angle alpha=25°. Constructed finite strain ellipsoid based on the X-axes of the elliptical shaped deformed markers of the diapir cover sequences show trend X-axis of the strain ellipsoid making an angle phai=2° with the boundary zones. The steep plunging stretching lineation primarily controlled by the plastic/viscous flow. This also show that during inclined upwelling boundary-parallel diapers, X-, Y-axes of the strain ellipsoid rotated clockwise and Z-axis experienced counter clockwise rotation with triclinic symmetries relative to the Zagros curvilinear transpression boundary zones with an orientation of N42°plus/minus 24°W.

Flash Flood Type Identification within Catchments in Beijing Mountainous Area

NASA Astrophysics Data System (ADS)

Nan, W.

2017-12-01

Flash flood is a common type of disaster in mountainous area, Flash flood with the feature of large flow rate, strong flushing force, destructive power, has periodically caused loss to life and destruction to infrastructure in mountainous area. Beijing as China's political, economic and cultural center, the disaster prevention and control work in Beijing mountainous area has always been concerned widely. According to the transport mechanism, sediment concentration and density, the flash flood type identification within catchment can provide basis for making the hazards prevention and mitigation policy. Taking Beijing as the study area, this paper extracted parameters related to catchment morphological and topography features respectively. By using Bayes discriminant, Logistic regression and Random forest, the catchments in Beijing mountainous area were divided into water floods process, fluvial sediment transport process and debris flows process. The results found that Logistic regression analysis showed the highest accuracy, with the overall accuracy of 88.2%. Bayes discriminant and Random forest had poor prediction effects. This study confirmed the ability of morphological and topography features to identify flash flood process. The circularity ratio, elongation ratio and roughness index can be used to explain the flash flood types effectively, and the Melton ratio and elevation relief ratio also did a good job during the identification, whereas the drainage density seemed not to be an issue at this level of detail. Based on the analysis of spatial patterns of flash flood types, fluvial sediment transport process and debris flow process were the dominant hazards, while the pure water flood process was much less. The catchments dominated by fluvial sediment transport process were mainly distributed in the Yan Mountain region, where the fault belts were relatively dense. The debris flow process prone to occur in the Taihang Mountain region thanks to the abundant coal gangues. The pure water flood process catchments were mainly distributed in the transitional mountain front.

Nd isotopic characterization of metamorphic rocks in the Coast Mountains, Alaskan and Canadian Cordillera: Ancient crust bounded by juvenile terranes

NASA Astrophysics Data System (ADS)

Samson, Scott D.; Patchett, P. Jonathan; McClelland, William C.; Gehrels, George E.

1991-08-01

Nd isotopic data are reported for 52 samples from the crustal region between the Alexander-Wrangellia terrane and the Stikine terrane of the Alaskan and Canadian Cordillera. This region is composed of the Gravina belt, a Jurassic-Cretaceous assemblage of volcanic and clastic sedimentary rocks, the Taku terrane, a terrane of probable Early Permian to Late Triassic age, and four assemblages of metamorphic rocks that occur to the west of and within the Coast Mountains batholith. The Gravina belt has ɛNd(T) values that range from -1.1 to +8.3, similar to values of the underlying Alexander terrane, and consistent with the interpretation that it is a juvenile belt that formed in a back-arc or intra-arc basin within the Alexander terrane. Mid-Cretaceous plutons that were emplaced into the Gravina belt have ɛNd(T) values of +4.4 to +5.7 and were probably produced by mantle-derived melts that incorporated some Alexander terrane crust. The Taku terrane has ɛNd(0) values that range from -5.5 to +3.3, with corresponding depleted-mantle model (TDM) ages of 440 to 1430 Ma. A mid-Cretaceous pluton intruding the Taku terrane has an ɛNd(T) value of +5.1, a value indistinguishable from those determined for Cretaceous plutons intruding the Gravina belt. Metamorphic rocks east of and structurally overlying the Taku terrane are divided into the Tracy Arm assemblage, ɛNd(0)=-26 to 0, TDM=800-2450 Ma; the Endicott Arm assemblage, eNd(0)=-10 to -1.3, TDM=950-1500 Ma; the Port Houghton assemblage, ɛNd(0)=-9.4 to +1.1, TDM = 550-1500 Ma; and the Ruth assemblage, ɛNd(0) = -9.4 to +2.0, TDM=650-1300 Ma. These isotopic signatures indicate that a substantial component of each metamorphic assemblage was derived from Precambrian continental crust. The metamorphic rocks from these assemblages are lithologically very similar to rocks of the Yukon-Tanana (YTT) terrane of eastern Alaska and Yukon Territory and have such similar U-Pb detrital zircon ages and Nd isotopic compositions to YTT rocks that they are considered part of that terrane. Possible tectonic scenarios that can explain the present geometry of the YTT with respect to the Alexander-Wrangellia and Stikine terranes include: (1) The YTT is the upturned stratigraphic basement of the Stikine terrane, (2) part of the YTT was structurally emplaced beside the Stikine terrane in a transpressive tectonic regime, (3) the Stikine terrane and other inboard terranes are huge sheets that were thrust over the margin of the YTT before the final accretion of the Alexander-Wrangellia terrane.

Cripple Creek and other alkaline-related gold deposits in the Southern Rocky Mountains, USA: Influence of regional tectonics

USGS Publications Warehouse

Kelley, K.D.; Ludington, S.

2002-01-01

Alkaline-related epithermal vein, breccia, disseminated, skarn, and porphyry gold deposits form a belt in the southern Rocky Mountains along the eastern edge of the North American Cordillera. Alkaline igneous rocks and associated hydrothermal deposits formed at two times. The first was during the Laramide orogeny (about 70-40 Ma), with deposits restricted spatially to the Colorado mineral belt (CMB). Other alkaline igneous rocks and associated gold deposits formed later, during the transition from a compressional to an extensional regime (about 35-27 Ma). These younger rocks and associated deposits are more widespread, following the Rocky Mountain front southward, from Cripple Creek in Colorado through New Mexico. All of these deposits are on the eastern margin of the Cordillera, with voluminous calc-alkaline rocks to the west. The largest deposits in the belt include Cripple Creek and those in the CMB. The most important factor in the formation of all of the gold deposits was the near-surface emplacement of relatively oxidized volatile-rich alkaline magmas. Strontium and lead isotope compositions suggest that the source of the magmas was subduction-modified subcontinental lithosphere. However, Cripple Creek alkaline rocks and older Laramide alkaline rocks in the CMB that were emplaced through hydrously altered LREE-enriched rocks of the Colorado (Yavapai) province have 208Pb/204Pb ratios that suggest these magmas assimilated and mixed with significant amounts of lower crust. The anomalously hot, thick, and light crust beneath Colorado may have been a catalyst for large-scale transfer of volatiles and crustal melting. Increased dissolved H2O (and CO2, F, Cl) of these magmas may have resulted in more productive gold deposits due to more efficient magmatic-hydrothermal systems. High volatile contents may also have promoted Te and V enrichment, explaining the presence of fluorite, roscoelite (vanadium-rich mica) and tellurides in the CMB deposits and Cripple Creek as opposed to deposits to the south. Deep-seated structures of regional extent that formed during the Proterozoic allowed the magmas to rise to shallow crustal levels. Proterozoic sites of intrusions at 1.65, 1.4, and 1.1 Ga were also important precursors to alkaline-related gold deposits. Many of the larger gold deposits are located at sites of Proterozoic intrusions, and are localized at the intersection of northeast-trending ductile shear zones formed during Mesoproterozoic deformation, and an important north-trending fault formed during 1.1 Ga rifting.

Tectonic-Climate Interactions in Action Orogenic Belts: Quantification of Dynamic Topography with SRTM data

NASA Technical Reports Server (NTRS)

Burbank, Douglas W.; Oskin, Mike; Niemi, Nathan; Miller, Scott

2005-01-01

This project was undertaken to examine the approach to steady state in collisional mountain belts. Although the primary thrust of this grant was to look at larger collisional mountain belts, such as the Himalaya, the Tien Shan, and Southern Alps, we began by looking at smaller structures represented by growing and propagating folds. Like ranges that are evolving toward a topographic steady state, these folds undergo a series of morphologic changes as they are progressively uplifted and eroded. We wanted to document the nature of these changes and to try to discern some of the underlying controls on them. We initially focused on the Wheeler Ridge anticline in southern California. Subsequently, we progressed to looking at the topographic development and the effects of differential uplift and glaciation on the Kyrgyz Range in the northern Tien Shan. This range is unusual inasmuch as it is transformed along its length from a simple uplift with a largely preserved Mesozoic erosion surface arching across it to a highly dissected and heavily glaciated uplift in the region where uplift has been sustained at higher rates over longer intervals. In efforts to understand the distribution of erosion rates at 10(exp 3) - 10(exp 5) year time scales, cosmogenic radionuclide (CRN) concentrations have been gaining increasingly widespread usage (Brown et al., 1995; Riebe et al., 2004; Riebe et al., 2001; Vance et al., 2003). Most studies to date, however, have been conducted in slowly eroding ranges. In rapidly eroding mountains where landslides deliver most of the sediments to the rivers, we hypothesized that CRN concentrations could be highly perturbed by the stochastic processes of landsliding. Therefore, we undertook the development of a numerical model that simulated the effects of both landsliding and grain-by-grain attrition within fluvial catchments. This modeling effort has shown the effects of catchment size and erosion rate on CRN concentrations and allows a prediction of where to sample to obtain the optimal erosion rate estimates using CRN techniques. Finally, we developed computational techniques to operate on DEMs to extract useful information that would enable quantification of climate-erosion interactions. In particular, we worked on rapid techniques to define catchments of any given range of sizes, to extract channel gradients, to combine precipitation information to calculate discharge, and to utilize various stream-power models to determine the erosional energy within any given catchment within a transect. We briefly describe results from Wheeler Ridge, the Kyrgyz Range, the Nepal Himalaya, and our numerical modeling.

Loess Plateau storage of Northeastern Tibetan Plateau-derived Yellow River sediment

PubMed Central

Nie, Junsheng; Stevens, Thomas; Rittner, Martin; Stockli, Daniel; Garzanti, Eduardo; Limonta, Mara; Bird, Anna; Andò, Sergio; Vermeesch, Pieter; Saylor, Joel; Lu, Huayu; Breecker, Daniel; Hu, Xiaofei; Liu, Shanpin; Resentini, Alberto; Vezzoli, Giovanni; Peng, Wenbin; Carter, Andrew; Ji, Shunchuan; Pan, Baotian

2015-01-01

Marine accumulations of terrigenous sediment are widely assumed to accurately record climatic- and tectonic-controlled mountain denudation and play an important role in understanding late Cenozoic mountain uplift and global cooling. Underpinning this is the assumption that the majority of sediment eroded from hinterland orogenic belts is transported to and ultimately stored in marine basins with little lag between erosion and deposition. Here we use a detailed and multi-technique sedimentary provenance dataset from the Yellow River to show that substantial amounts of sediment eroded from Northeast Tibet and carried by the river's upper reach are stored in the Chinese Loess Plateau and the western Mu Us desert. This finding revises our understanding of the origin of the Chinese Loess Plateau and provides a potential solution for mismatches between late Cenozoic terrestrial sedimentation and marine geochemistry records, as well as between global CO2 and erosion records. PMID:26449321

Tectonic escape in the evolution of the continental crust

NASA Technical Reports Server (NTRS)

Burke, K.; Sengor, C.

1986-01-01

The continental crust originated by processes similar to those operating today and continents consist of material most of which originated long ago in arc-systems that have later been modified, especially at Andean margins and in continental collisions where crustal thickening is common. Collision-related strike-slip motion is a general process in continental evolution. Because buoyant continental (or arc) material generally moves during collision toward a nearby oceanic margin where less buoyant lithosphere crops out, the process of major strike-slip dominated motion toward a 'free-face' is called 'tectonic escape'. Tectonic escape is and has been an element in continental evolution throughout recorded earth-history. It promotes: (1) rifting and the formation of rift-basins with thinning of thickened crust; (2) pervasive strike-slip faulting late in orogenic history which breaks up mountain belts across strike and may juxtapose unrelated sectors in cross-section; (3) localized compressional mountains and related foreland-trough basins.

Coseismic and blind fault of the 2015 Pishan Mw 6.5 earthquake: Implications for the sedimentary-tectonic framework of the western Kunlun Mountains, northern Tibetan Plateau

NASA Astrophysics Data System (ADS)

Lu, Renqi; Xu, Xiwei; He, Dengfa; Liu, Bo; Tan, Xibin; Wang, Xiaoshan

2016-04-01

On 3 July 2015, the Mw 6.5 Pishan earthquake occurred in the western Kunlun Mountains front, at the northern margin of the Tibetan Plateau. To reveal the sedimentary-tectonic framework of the seismically active structure, three high-resolution seismic reflection profiles and well drilling data were collected for seismic interpretation. The western Kunlun Mountains and Tarim Basin have two gypseous detachments and one basement detachment that control the tectonic framework and structural deformation. The upper gypseous detachment (D1) is in the lower Paleocene, and the middle gypseous detachment (D2) is in the Middle to Lower Cambrian. A Neogene shallow thrust system is developing above D1 and includes the Zepu fault (F2) and Mazar Tagh fault (F3). A deep thrust system is developing between D1 and D2 and forms a large-scale structural wedge beneath the western Kunlun Mountains front. The Pishan Mw 6.5 earthquake was triggered on a frontal blind fault of this deep thrust system. The lower detachment is in the Proterozoic basement (D3), which extends into the Tarim Basin and develops another deep thrust (F4) beneath the F3 belt. D1, D2, D3, and the Tiekelike fault (F1) merge together at depth. Crustal shortening of the western Kunlun Mountains front continues for approximately 54 km. Two tectonic evolutionary stages have occurred since the Miocene according to sedimentary unconformity, axial analysis, and fault interpretation. The results of this study indicate a regime of episodic growth of the western Kunlun Mountains and Tarim Basin during the Cenozoic.

The Late Cretaceous Aarya flora of the northern Okhotsk region and phytostratigraphy of the lower part of the Okhotsk-Chukotka volcanogenic belt section

NASA Astrophysics Data System (ADS)

Shczepetov, S. V.; Golovneva, L. B.

2014-07-01

The Zarya flora comes from volcanogenic sedimentary rocks of the Zarya and Parnyi formations that correspond to the basal part of the section of the Okhotsk-Chukotka volcanogenic belt in the Omsukchan district (Magadan oblast, Russia). The revision of its taxonomic composition resulted in identifying approximately 25 species of horsetails, ferns, cycads, ginkgoalens, czekanowskians, conifers, and angiosperms. The Zarya flora is characterized by a combination of the Early Cretaceous relicts ( Hausmannia, Birisia, Sphenobaiera, Phoenicopsis, Nilssonia, Podozamites) and typical Late Cretaceous taxa ( Taxodium, Sequoia, Menispermites, Dalembia, Trochodendroides, Cissites, Terechovia, Platanaceae). Among all the paleofloral assemblages of the Okhotsk-Chukotka volcanogenic belt, the Zarya flora is the most similar to the Turonian-Coniacian Arman flora of the Magadan region, which indicates their synchronism and floral unity. The Chingandzha flora of the Omsukchan area, which comes from the same stratigraphic level as Zarya flora, differs substantially from the latter in its taxonomic composition. It is conceivable that the Chingandzha flora was confined to a large river valley which was connected to coastal lowlands. The plant remains of the Arman flora with many mountain relicts could be buried in sediments of intermountain troughs isolated from coastal lowlands. Araucarites ochotensis sp. nov. is described.

Bermuda and Appalachian-Labrador rises: Common non-hotspot processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vogt, P.R.

1991-01-01

Other than the Corner Rise-New England seamounts and associated White Mountains, most postbreakup intraplate igneous activity and topographic uplift in the western North Atlantic and eastern North America do not readily conform to simple hotspot models. For examples, the Bermuda Rise trends normal to its predicted hotspot trace. On continental crust, Cretaceous-Eocene igneous activity is scattered along a northeast-trending belt {approximately}500-1,000 km west of and paralleling the continent-ocean boundary. Corresponding activity in the western Atlantic generated seamounts preferentially clustered in a belt {approximately}1,000 km east of the boundary. The Eocene volcanism on Bermuda is paired with coeval magmatism of themore » Shenandoah igneous province, and both magmatic belts are associated with northeast-trending topographic bulges - the Appalachian-Labrador Rise to the west and the Bermuda Rise (Eocene ) to the east. The above observations suggest the existence of paired asthenosphere upwelling, paralleling and controlled by the deep thermal contrast across the northeast-trending continental margin. Such convection geometry, apparently fixed to the North American plate rather than to hotspots, is consistent with recent convection models by B. Hager. The additional importance of plate-kinematic reorganizations (causing midplate stress enhancement) is suggested by episodic igneous activity ca. 90-100 Ma and 40-45 Ma.« less

Tectonic evolution of Western Ishtar Terra, Venus

NASA Astrophysics Data System (ADS)

Marinangeli, Lucia

1997-03-01

A detailed geological mapping based on Magellan data has been done in Western Ishtar Terra from 300-330 deg W to 65-75 deg N. The area studied comprises three main phisiografic provinces, Atropos Tessera, Akna Montes and North-Western Lakshmi Planum. The purposes of this study are (1) to recognize the tectonism of this area and investigate its type, direction, intensity, distribution and age relationships, (2) to define the link between the formation of the Akna mountain belt and the tectonic deformation in adjacent Tessera and Lakshmi Planum.

Silent reminders: geologic wonders of the George Washington and Jefferson National Forests

USGS Publications Warehouse

,; ,

2001-01-01

The iron industry played a vital role in the industrialization of the United States and in the development of the U.S. economy and society. Much of the early history of the iron industry took place in Virginia. The remains of 11 iron furnaces and nearby mines in the George Washington and Jefferson National Forests in Virginia and West Virginia are silent reminders of a time when iron mines and furnaces operated along a belt that extended through the Appalachian Mountains from New York State to Alabama.

60. VIEW OF ROASTER ADDITION FROM WEST, LOCATION OF SYMONS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

60. VIEW OF ROASTER ADDITION FROM WEST, LOCATION OF SYMONS 3 BY 8 FEET VIBRATING SCREEN. SHOWS BAKER COOLER WITH DUST COLLECTOR DUCT AND DISCHARGE CHUTE ON LEFT. THE 14 INCH BELT CONVEYOR WAS SUPPORTED ON TWO BENTS IN CENTER OF VIEW AS IT CONNECTED WITH THE BUCKET ELEVATOR/ORE BIN TOWER, WHICH IN TURN FED THE ROASTER (BEHIND). THE BASE OF THE ROASTER EXHAUST STACK IS AT THE UPPER RIGHT. - Bald Mountain Gold Mill, Nevada Gulch at head of False Bottom Creek, Lead, Lawrence County, SD

Geology, geochronology, and paleogeography of the southern Sonoma volcanic field and adjacent areas, northern San Francisco Bay region, California

USGS Publications Warehouse

Wagner, David L.; Saucedo, George J.; Clahan, Kevin B.; Fleck, Robert J.; Langenheim, Victoria E.; McLaughlin, Robert J.; Sarna-Wojcicki, Andrei M.; Allen, James R.; Deino, Alan L.

2011-01-01

Recent geologic mapping in the northern San Francisco Bay region (California, USA) supported by radiometric dating and tephrochronologic correlations, provides insights into the framework geology, stratigraphy, tectonic evolution, and geologic history of this part of the San Andreas transform plate boundary. There are 25 new and existing radiometric dates that define three temporally distinct volcanic packages along the north margin of San Pablo Bay, i.e., the Burdell Mountain Volcanics (11.1 Ma), the Tolay Volcanics (ca. 10–8 Ma), and the Sonoma Volcanics (ca. 8–2.5 Ma). The Burdell Mountain and the Tolay Volcanics are allochthonous, having been displaced from the Quien Sabe Volcanics and the Berkeley Hills Volcanics, respectively. Two samples from a core of the Tolay Volcanics taken from the Murphy #1 well in the Petaluma oilfield yielded ages of 8.99 ± 0.06 and 9.13 ± 0.06 Ma, demonstrating that volcanic rocks exposed along Tolay Creek near Sears Point previously thought to be a separate unit, the Donnell Ranch volcanics, are part of the Tolay Volcanics. Other new dates reported herein show that volcanic rocks in the Meacham Hill area and extending southwest to the Burdell Mountain fault are also part of the Tolay Volcanics. In the Sonoma volcanic field, strongly bimodal volcanic sequences are intercalated with sediments. In the Mayacmas Mountains a belt of eruptive centers youngs to the north. The youngest of these volcanic centers at Sugarloaf Ridge, which lithologically, chemically, and temporally matches the Napa Valley eruptive center, was apparently displaced 30 km to the northwest by movement along the Carneros and West Napa faults. The older parts of the Sonoma Volcanics have been displaced at least 28 km along the Rodgers Creek fault since ca. 7 Ma. The Petaluma Formation also youngs to the north along the Rodgers Creek–Hayward fault and the Bennett Valley fault. The Petaluma basin formed as part of the Contra Costa basin in the Late Miocene and was displaced to its present location along the Rodgers Creek–Hayward and older faults. The Tolay fault, previously thought to be a major dextral fault, is part of a fold-and-thrust belt that does not exhibit lateral displacement.

Remote sensing and GIS approach for water-well site selection, southwest Iran

USGS Publications Warehouse

Rangzan, K.; Charchi, A.; Abshirini, E.; Dinger, J.

2008-01-01

The Pabdeh-Lali Anticline of northern Khuzestan province is located in southwestern Iran and occupies 790 km2. This structure is situated in the Zagros folded belt. As a result of well-developed karst systems in the anticlinal axis, the water supply potential is high and is drained by many peripheral springs. However, there is a scarcity of water for agriculture and population centers on the anticlinal flanks, which imposes a severe problem in terms of area development. This study combines remotely sensed (RS) data and a geographical information system (GIS) into a RSGIS technique to delineate new areas for groundwater development and specific sites for drilling productive water wells. Toward these goals, RS data were used to develop GIS layers for lithology, structural geology, topographic slope, elevation, and drainage density. Field measurements were made to create spring-location and groundwater-quality GIS layers. Subsequently, expert choice and relational methods were used in a GIS environment to conjunctively analyze all layers to delineate preferable regions and 43 individual sites in which to drill water wells. Results indicate that the most preferred areas are, in preferential order, within recent alluvial deposits, the Bakhtiyari Conglomerates, and the Aghajari Sandstone. The Asmari Limestone and other units have much lower potential for groundwater supplies. Potential usefulness of the RSGIS method was indicated when six out of nine producing wells recently drilled by the Khozestan Water and Power Authority (which had no knowledge of this study) were located in areas preferentially selected by this technique.

Isostatic models and isostatic gravity anomalies of the Arabian plate and surroundings

NASA Astrophysics Data System (ADS)

Kaban, Mikhail K.; El Khrepy, Sami; Al-Arifi, Nassir

2015-04-01

Isostaic anomalies represent one of the most useful "geological" reduction of the gravity field. With the isostatic correction it is possible to remove a significant part of the effect of deep density heterogeneity, which dominates in the Bouguer gravity anomalies. This correction is based on the fact that a major part of the near-surface load is compensated by variations of the lithosphere boundaries (chiefly the Moho and LAB) and by density variations within the crust and upper mantle. It is usually supposed that it is less important to a first order, what is the actual compensation model when reducing the effect of compensating masses, since their total weight is exactly opposite to the near-surface load. We compare several compensating models for the Arabian plate and surrounding area. The Airy model gives very significant regional isostatic anomalies, which can not be explained by the upper crust structure or disturbances of the isostatic equilibrium. Also the predicted "isostatic" Moho is very different from the existing observations. The second group of the isostatic models includes the Moho, which is based on existing seismic determinations. Additional compensation is provided by density variations within the lithosphere (chiefly in the upper mantle). In this way we minimize regional anomalies over the Arabian plate. The residual local anomalies well correspond to tectonic structure of the plate. Still very significant anomalies are associated with the Zagros fold belt, the collision zone of the Arabian and Eurasian plates.

Structural Analysis of Active North Bozgush Fault Zone (NW Iran)

NASA Astrophysics Data System (ADS)

Saber, R.; Isik, V.; Caglayan, A.

2013-12-01

NW Iran is one of the seismically active regions between Zagros Thrust Belt at the south and Caucasus at the north. Not only large magnitude historical earthquakes (Ms>7), but also 1987 Bozgush, 1997 Ardebil (Mw 6.1) and 2012 Ahar-Varzagan (Mw 6.4) earthquakes reveal that the region is seismically active. The North Bozgush Fault Zone (NBFZ) in this region has tens of kilometers in length and hundreds of meters in width. The zone has produced some large and destructive earthquakes (1593 M:6.1 and 1883 M:6.2). The NBFZ affects the Cenozoic units and along this zone Eocene units thrusted over Miocene and/or Plio-Quaternary sedimentary units. Together with morphologic features (stream offsets and alluvial fan movements) affecting the young unites reveal that the zone is active. The zone is mainly characterized by strike-slip faults with reverse component and reverse faults. Reverse faults striking N55°-85°E and dip of 40°-50° to the SW while strike-slip faults show right lateral slip with N60°-85°W and N60°-80°E directions. Our structural data analysis in NBFZ indicates that the axis direction of σ2 principal stress is vertical and the stress ratio (R) is 0.12. These results suggest that the tectonic regime along the North Bozgush Fault Zone is transpressive. Obtained other principal stresses (σ1, σ3) results are compatible with stress directions and GPS velocity suggested for NW Iran.

Late Precambrian-Cambrian sediments of Huqf group, Sultanate of Oman

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gorin, G.E.; Racz, L.G.; Walter, M.R.

1982-12-01

The Huqf Group is the oldest known sedimentary sequence overlying crystalline basement in the Sultanate of Oman. It crops out on a broad regional high, the Huqf Axis, which forms a dominating structural element on the southeastern edge of the Arabian peninsula. Subsurface and outcrop evidence within and outside of Oman suggests that the sediments of the Huqf Group lie within the age span of late Precambrian to Early-Middle Cambrian. The Huqf Group is subdivided into five formations corresponding to an alternation of clastics (Abu Mahara and Shuram Formations) and carbonates (Khufai and Buah Formations) deposited in essentially shallow marinemore » to supratidal (or fluviatile) conditions and terminated by an evaporitic sequence (Ara Formation). Evaporites are absent on the Huqf Axis, but they are thickly developed to the west over a large part of southern and central Oman, where they acted as the major structure former of most of Oman's fields, and even locally pierced up to the surface. Regional correlations suggest that the predominantly carbonate-evaporitic facies of the Huqf Group was widely distributed in late Precambrian-Early Cambrian time: the Huqf basin is tentatively considered part of a belt of evaporitic basins and intervening carbonate platforms, which stretched across the Pangea landmass from the Indian subcontinent (Salt Range of Pakistan) through South Yemen, Oman, and Saudi Arabia into the gulf states and Iran (Hormuz Series and carbonate platform north of the Zagros).« less

Denudational slope processes and slope response to global climate changes and other disturbances: insights from the Nepal Himalayas.

NASA Astrophysics Data System (ADS)

Fort, Monique

2016-04-01

Hillslope geomorphology results from a large range of denudational processes mainly controlled by relief, structure, lithology, climate, land-cover and land use. In most areas of the world, the "critical zone" concept is a good integrator of denudation that operates on a long-term scale. However, in large and high mountain areas, short-time scale factors often play a significant role in the denudational pattern, accelerating and/or delaying the transfer of denudation products and fluxes, and creating specific, spatially limited disturbances. We focus on the Nepal Himalayas, where the wide altitudinal range of bio-climatic zones and the intense geodynamic activity create a complex mosaic of landforms, as expressed by the present geomorphology of mountain slopes. On the basis of examples selected in the different Himalayan mountain belts (Siwaliks hills, middle mountains, High Himalaya), we illustrate different types of slopes and disturbances induced by active tectonics, climate extremes, and climate warming trends. Special attention is paid to recent events, such as landslide damming, triggered by either intense rainfalls (Kali Gandaki and Sun Kosi valleys) or the last April-May 2015 Gorkha seismic sequence (southern Khumbu). Lastly, references to older, larger events show that despite the highly dynamic environment, landforms caused by large magnitude disturbances may persist in the landscape in the long term.

Vertical zonation of soil fungal community structure in a Korean pine forest on Changbai Mountain, China.

PubMed

Ping, Yuan; Han, Dongxue; Wang, Ning; Hu, Yanbo; Mu, Liqiang; Feng, Fujuan

2017-01-01

Changbai Mountain, with intact montane vertical vegetation belts, is located at a sensitive area of global climate change and a central distribution area of Korean pine forest. Broad-leaved Korean pine mixed forest (Pinus koraiensis as an edificator) is the most representative zonal climax vegetation in the humid region of northeastern China; their vertical zonation is the most intact and representative on Changbai Mountain. In this study, we analyzed the composition and diversity of soil fungal communities in the Korean pine forest on Changbai Mountain at elevations ranging from 699 to 1177 m using Illumina High-throughput sequencing. We obtained a total 186,663 optimized sequences, with an average length of 268.81 bp. We found soil fungal diversity index was decreased with increasing elevation from 699 to 937 m and began to rise after reaching 1044 m; the richness and evenness indices were decreased with an increase in elevation. Soil fungal compositions at the phylum, class and genus levels varied significantly at different elevations, but with the same dominant fungi. Beta-diversity analysis indicated that the similarity of fungal communities decreased with an increased vertical distance between the sample plots, showing a distance-decay relationship. Variation partition analysis showed that geographic distance (mainly elevation gradient) only explained 20.53 % of the total variation of fungal community structure, while soil physicochemical factors explained 69.78 %.

Cretaceous combined structure in eastern Sichuan Basin, China

NASA Astrophysics Data System (ADS)

Wang, P.; Liu, S.

2009-12-01

Eastern Sichuan Basin is confined by two thin-skinned fold-thrust belt, NW-trending Southern Daba Shan (Shan=Mountain) (SDB) in the northeast and NNE- or NE-trending Western XueFeng Shan (WXF) in the southeast, which constitute two convergent salients convex to the inner basin respectively. Although many factors can lead to the formation of fold-thrust belt salients, the eastern Sichuan salients would be attributed to the combined structure (firstly nominated by Chinese geologist, Li Siguang), which means the interaction of two structural belts in the same period. By field surveying and geological map interpreting, we found that WXF deformation began in Late Jurassic along the eastern side of structral belt, where the synclines cored by Upper-Middle Jurassic rock. The initial time of SDB deformation remains poorly determined, however our palaeocurrent data of Lower Cretaceous rock in adjecent foreland basin indicate the provenance from northeast or east. Hence we considered the two fold-thrust belt started interactive in Late Jurassic and mainly combined during Cretaceous. In Early Cretaceous, the front belt of WXF salient arrived near KaiXian where NEE-trending arc-shape folds converged with the NWW-trending arc-shape folds of SDB.The two salients shaped like an westward "open mouth", east of which EW-trending folds of two structural belts juxtaposed. Particularly in the middle belt of WXF (FengJie - WuFeng) the earlier NEE-trending folds were refolded by later NNE-trending folds. We interpret the NEE-trending folds as the front belt of earlier (maybe Late Jurassic) WXF salient. When the two combined fold belts propagated westward together, the original NNE-trending front belt of WXF constrained by the front belt of SDB and formed the curved fold trend lines convex to NNW. Then as WXF deformation continued but SDB gradually terminated, the consequent NNE-trending folds could not be curved and would superpose on the earlier NEE-trending folds.In Late Cretaceous, WXF still propagated westward but without combination with SDB, and formed three NNE-trending parallel anticlines flanking the central Sichuan Basin. These anticlines dominated by steep dips and west-vergent thrust faults, which suggests the eastward back pushing force. We suppose that the pre-existing deep fault obstructed the WXF westward propagation. In addition, thermochronolgy analysis proved that SDB underwent tectonic sequence in Late Cretaceous. Thus the convergent salients broke up with only NNE-trending parallel fold being present in the front belt of WXF. We also use a finite-element model (FEM) to illustrate the maximum horizontal compressive stress (SHmax) under the combined structure in ABAQUSTM software. A 2D plane stress model with realistic mechanical properties for whole Sichuan Basin was built based on the Late Jurassic paleogeographic boundaries. The model consists of 5,400 elements, providing a resolution of 0.1° in both latitude and longitude. In general, FEM analysis result shows the SHmax direction well perpendicular to the arc-shape folds trend lines in eastern Sichuan Basin when pressure loaded on the SDB and WXF boundaries. The SHmax contours reflect two convergent salients incorporating the gradually decreased stress value from the boundaries to inner basin.

Glacial Refugium of Pinus pumila (Pall.) Regel in Northeastern Siberia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shilo, N A; Lozhkin, A V; Anderson, P M

One of the most glowing representatives of the Kolyma flora [1], ''Pinus pumila'' (Pall.) Regel (Japanese stone pine), is a typical shrub in larch forests of the northern Okhotsk region, basins of the Kolyma and Indigirka rivers, and high-shrub tundra of the Chukchi Peninsula. It also forms a pine belt in mountains above the forest boundary, which gives way to the grass-underbrush mountain tundra and bald mountains. In the southern Chukchi Peninsula, ''Pinus pumila'' along with ''Duschekia fruticosa'' (Rupr.) Pouzar and ''Betula middendorffii'' Trautv. et C. A. Mey form trailing forests transitional between tundra and taiga [2]. Pinus pumila pollen,more » usually predominating in subfossil spore-and-pollen spectra of northeastern Siberia, is found as single grains or a subordinate component (up 2-3%, rarely 10%) in spectra of lacustrine deposits formed during the last glacial stage (isotope stage 2) in the Preboreal and Boreal times of the Holocene. Sometimes, its content increases to 15-22% in spectra of lacustrine deposits synchronous to the last glacial stage near the northern coast of the Sea of Okhotsk [3], evidently indicating the proximity of Japanese stone pine thickets.« less

Detrital zircon evidence for the ternary sources of the Chinese Loess Plateau

NASA Astrophysics Data System (ADS)

Sun, Jimin; Ding, Zhongli; Xia, Xiaoping; Sun, Min; Windley, Brian F.

2018-04-01

The provenance of Chinese loess is fundamental for understanding its origin, transportation and climatic significance. In this paper, eight samples were collected for detrital zircon age analysis, five from different deserts, and three from the Jingbian Section in the northern Chinese Loess Plateau, covering an age range of 2.6-0.03 Ma. The new results, integrated with knowledge of relevant topography and wind patterns, demonstrate that the age spectra of the detrital zircons in the loess are different from those of the sands from the Tarim, Junggar and Qaidam basins, implying that these basins were not the sources of the silts of the Loess Plateau. Further analysis suggests that the three sources for the loess are: (1) clastic materials eroded from the mountains of the Central Asian Orogenic Belt (especially the Gobi Altai and Hangay), (2) clastic loess-sized materials generated by erosion of the Qilian Mountains in the NE Tibetan Plateau, and (3) minor clastic debris derived from the mountains of the North China Craton. Thus, silts of the Loess Plateau have a complex origin, although inland basins, long believed to be important sources, have only a minor role at most.

Cordilleran front range structural features in northwest Montana interpreted from vintage seismic reflection data

NASA Astrophysics Data System (ADS)

Porter, Mason C.; Rutherford, Bradley S.; Speece, Marvin A.; Mosolf, Jesse G.

2016-04-01

Industry seismic reflection data spanning the Rocky Mountain Cordillera front ranges of northwest Montana were reprocessed and interpreted in this study. Five seismic profiles represent 160 km of deep reflection data collected in 1983 that span the eastern Purcell anticlinorium, Rocky Mountain Trench (RMT), Rocky Mountain Basal Décollement (RMBD), and Lewis thrust. The data were reprocessed using modern techniques including refraction statics, pre-stack time migration (PSTM), and pre- and post-stack depth migration. Results indicate the RMBD is 8-13 km below the Earth's surface and dip 3-10° west. Evidence for the autochthonous Mesoproterozoic Belt and basal Cambrian rocks beneath the RMBD is present in all of the profiles and appears to extend east of the RMT. The Lewis thrust was identified in the seismic profiles and appears to sole into the RMBD east of the RMT. The RMT fault system has a dip displacement of 3-4 km and forms a half graben filled with 1 km of unconsolidated Tertiary sedimentary deposits. The RMT and adjacent Flathead fault systems are interpreted to be structurally linked and may represent a synthetic, en echelon fault system.

Rapid post-seismic landslide evacuation boosted by dynamic river width

NASA Astrophysics Data System (ADS)

Croissant, Thomas; Lague, Dimitri; Steer, Philippe; Davy, Philippe

2017-09-01

Mass wasting caused by large-magnitude earthquakes chokes mountain rivers with several cubic kilometres of sediment. The timescale and mechanisms by which rivers evacuate small to gigantic landslide deposits are poorly known, but are critical for predicting post-seismic geomorphic hazards, interpreting the signature of earthquakes in sedimentary archives and deciphering the coupling between erosion and tectonics. Here, we use a new 2D hydro-sedimentary evolution model to demonstrate that river self-organization into a narrower alluvial channel overlying the bedrock valley dramatically increases sediment transport capacity and reduces export time of gigantic landslides by orders of magnitude compared with existing theory. Predicted export times obey a universal non-linear relationship of landslide volume and pre-landslide valley transport capacity. Upscaling these results to realistic populations of landslides shows that removing half of the total coarse sediment volume introduced by large earthquakes in the fluvial network would typically take 5 to 25 years in various tectonically active mountain belts, with little impact of earthquake magnitude and climate. Dynamic alluvial channel narrowing is therefore a key, previously unrecognized mechanism by which mountain rivers rapidly digest extreme events and maintain their capacity to incise uplifted rocks.

Hydrogeology of the karst of Puerto Rico

USGS Publications Warehouse

Giusti, Ennio V.

1978-01-01

About one-fifth of Puerto Rico is covered by a tropical karst formed on a series of six limestone formations ranging in age from middle-Oligocene to middle Miocene. These formations strike east to west and crop out over the north coast of the island. Structurally, the rocks form a simple wedge abutting southward against a mountain chain of volcanic origin and thickening northward to about 1,400 meters by the seashore. All stages of karstification are present: from the incipient, found at the western end of the belt to the residual, found at the eastern end. Maximum development of sinkholes occurs on the Aguada Limestone and upper part of the Aymanom Limestone. These formations have a CaCO3 content range from about 85 to 95 percent. The denudation rate of the Limestone belt through solution is computed as 0.70 mm per year with some evidence that abrasion may increase the denudation rate locally by as much as 40 percent. (Woodard-USGS)

Present-day uplift of the western Alps.

PubMed

Nocquet, J-M; Sue, C; Walpersdorf, A; Tran, T; Lenôtre, N; Vernant, P; Cushing, M; Jouanne, F; Masson, F; Baize, S; Chéry, J; van der Beek, P A

2016-06-27

Collisional mountain belts grow as a consequence of continental plate convergence and eventually disappear under the combined effects of gravitational collapse and erosion. Using a decade of GPS data, we show that the western Alps are currently characterized by zero horizontal velocity boundary conditions, offering the opportunity to investigate orogen evolution at the time of cessation of plate convergence. We find no significant horizontal motion within the belt, but GPS and levelling measurements independently show a regional pattern of uplift reaching ~2.5 mm/yr in the northwestern Alps. Unless a low viscosity crustal root under the northwestern Alps locally enhances the vertical response to surface unloading, the summed effects of isostatic responses to erosion and glaciation explain at most 60% of the observed uplift rates. Rock-uplift rates corrected from transient glacial isostatic adjustment contributions likely exceed erosion rates in the northwestern Alps. In the absence of active convergence, the observed surface uplift must result from deep-seated processes.

Venus tectonics - Initial analysis from Magellan

NASA Technical Reports Server (NTRS)

Solomon, Sean C.; Head, James W.; Kaula, William M.; Schubert, Gerald; Mckenzie, Dan

1991-01-01

The styles of lithospheric deformation, the inferred mechanical properties of the lithosphere, and their implications for the tectonic history of Venus are discussed on the basis of radar imaging and altimetry data from Magellan. Observations of the planet plains reveal a superposition of different episodes of deformation and volcanism, strain both distributed and concentrated into zones of extension and shortening, and features reflecting a crustal response to mantle dynamic processes. Lithospheric shortening and crustal thickening are represented by ridge belts and mountain belts. The latter show the evidence for extension and collapse both during and following crustal compression. Venus displays quasi-circular coronae and broad rises with linear rift zones, associated with significant volcanism. Large-offset strike-slip faults have not been observed, although horizontal shear is accommodated across broad zones of crustal shortening. On Venus strain is distributed across zones that are one to a few hundred kilometers wide, and separated by stronger and less deformed blocks hundreds of kilometers in width, as in actively deforming continental regions on earth.

Late Paleozoic orogeny in Alaska's Farewell terrane

USGS Publications Warehouse

Bradley, D.C.; Dumoulin, Julie A.; Layer, P.; Sunderlin, D.; Roeske, S.; McClelland, B.; Harris, A.G.; Abbott, G.; Bundtzen, T.; Kusky, T.

2003-01-01

Evidence is presented for a previously unrecognized late Paleozoic orogeny in two parts of Alaska's Farewell terrane, an event that has not entered into published scenarios for the assembly of Alaska. The Farewell terrane was long regarded as a piece of the early Paleozoic passive margin of western Canada, but is now thought, instead, to have lain between the Siberian and Laurentian (North American) cratons during the early Paleozoic. Evidence for a late Paleozoic orogeny comes from two belts located 100-200 km apart. In the northern belt, metamorphic rocks dated at 284-285 Ma (three 40Ar/39Ar white-mica plateau ages) provide the main evidence for orogeny. The metamorphic rocks are interpreted as part of the hinterland of a late Paleozoic mountain belt, which we name the Browns Fork orogen. In the southern belt, thick accumulations of Pennsylvanian-Permian conglomerate and sandstone provide the main evidence for orogeny. These strata are interpreted as the eroded and deformed remnants of a late Paleozoic foreland basin, which we name the Dall Basin. We suggest that the Browns Fork orogen and Dall Basin comprise a matched pair formed during collision between the Farewell terrane and rocks to the west. The colliding object is largely buried beneath Late Cretaceous flysch to the west of the Farewell terrane, but may have included parts of the so-called Innoko terrane. The late Paleozoic convergent plate boundary represented by the Browns Fork orogen likely connected with other zones of plate convergence now located in Russia, elsewhere in Alaska, and in western Canada. Published by Elsevier B.V.

Accretionary and collisional orogenesis in the south domain of the western Central Asian Orogenic Belt (CAOB)

NASA Astrophysics Data System (ADS)

Cai, Keda; Long, Xiaoping; Chen, Huayong; Sun, Min; Xiao, Wenjiao

2018-03-01

The Central Asian Orogenic Belt (CAOB) was the result of long-lived multi-stage tectonic evolution, including Proterozoic to Paleozoic accretion and collision, Mesozoic intracontinental modification, and Cenozoic rapid deformation and uplift. The accretionary and collisional orogenesis of its early history generated a huge orogenic collage consisting of diverse tectonic units including island arcs, ophiolites, accretionary prisms, seamounts, oceanic plateaus and micro-continents. These incorporated orogenic components preserved valuable detailed information on orogenic process and continental crust growth, which make the CAOB a key region to understanding of continental evolution, mantle-crust interaction and associated mineralization. The western CAOB refers to the west region in North Xinjiang of China and circum-Balkash of Kazakhstan, with occurrences of the spectacular Kazakhstan orocline and its surrounding mountain belts. Because orogenic fabrics of this part mostly preserve their original features caused by the interactions among the southern Siberian active margin in the north and the Tarim Craton in the south, the western CAOB can be regarded as an ideal region to study the processes of the accretionary and collisional orogenesis and associated mineralization. Since a large number of researchers have been working on this region, research advances bloom strikingly in a short-time period. Therefore, we, in this special issue, focus on these new study advances on the south domain of the western CAOB, including the Kazakhstan collage system, Tianshan orogenic belt and Beishan region, and it is anticipated that this issue can draw more attention from the international research groups to be interested in the studies on orogenesis of the CAOB.

Insights into the Timing, Origin, and Deformation of the Highland Mountains Gneiss Dome in Southwestern Montana, USA

NASA Astrophysics Data System (ADS)

Boyer, Lane Markes

The Highland Mountains of southwestern Montana offer a unique view of the Archean igneous and metamorphic rocks within the Great Falls tectonic zone (GFTZ). A Paleoproterozoic structural gneiss dome has been interpreted in the southern extent of the Highland Mountains. The ˜ 130km2 of exhumed metamorphic rocks and gneiss dome exposed in the Highland Mountains are the primary focus of this research. The formation of the Highland Mountains gneiss dome is proposed to be directly related to a northwest-side down detachment (the Steels Pass shear zone) that formed during terrane collision along the GFTZ. The field investigation determined foliation and lineation orientation measurements taken at 65 stations. Twenty-two field oriented samples were obtained from a variety of rock types distributed across the ˜ 24 km2 field area. Three field-based domains were established from the lithology, foliation, and lineation observations. Full-section X-ray maps of three sample thin-sections were collected via EPMA to identify all monazite grains. Twenty-eight grains were mapped at high-spatial resolution (0.3--6.0 mum). Thin section micro-structures observed show effects of a multistage deformation history with both dynamic and static recrystallization processes. Monazite geochronology of one thin section revealed two distinct populations of monazite grains; Archean (˜ 2.5 Ga) and Mesoproterozoic (˜ 1.5 Ga). The older population represents the crystallization age of either, or both the Medicine Hat block and the Wyoming province terranes. The younger population is hypothesized to have grown during deformation/alteration associated with the formation of the Belt-Purcell Rift Basin.

Status and Extent of Ericaceous Vegetation In The Conservation of Alpine Ecosytem In The Southern Slope of Bale Mountains

NASA Astrophysics Data System (ADS)

Assefa, Y.

The Bale mountain range is located between the wet east African mountains (proper) and the dry northeast African mountains, Southeast Ethiopia. This mountain range hosts some of endemic flora and fauna which are endangered of extinction. The most extensive Ericaceous vegetation in the continent is found in Bale Mountains. The southern slope of this mountain range is known for its distinct vegetation zonation of the Afromontane forests. The Ericaceous vegetation between the montane forest and the afroalpine of this slope is relatively little disturbed than other similar Ericaceous vegetation elsewhere in Africa. Study on the distribution and structure of this vegeta- tion was made from Nov. 1999- April 2000 on the southern slope, Harrena escarpment. The vegetation north of Rira village, between 3000m and 4200m was sampled after selecting continuous homogenous sites systematically along the altitudinal gradient. Cover abundance of the species for vascular plants, frequency, height and DBH for woody treeline species were taken in 110 quadrats. The environmental parameters along the altitudinal gradient including soil pH, texture, total nitrogen, and soil mois- ture were measured. Altitude, slope, and aspect were measured for all qudrats. All the environmental and vegetation data were analyzed with Syntax, Canoco, Minitab and Sigma plot. Anthropozogenic data was taken using questionnaire and analyzed. Thir- teen community types were described and their distribution showed a clear pattern at different parts of the Ericaceous vegetation. However some of the community types which were restricted to the Afroalpine belt were found in the Ericaceous vegetation. This might be a possible indication of the expansion of the afroalpine belt to lower altitude, even below 3400 m (Erica dominated Hagenia-Hypericum zone). The height of the tree and shrub species has shown a decreasing tendency with increase in al- titude. This trend was very gradual for E. trimera. The species occurs for about 1.2 km altitudinal range showing difference in height and habit along altitudinal gradi- ent. The regression analysis (r2=0.58) has shown a consistent decrease in height along altitude. No abrupt transition was documented in the systematically selected continu- ous Ericaceous vegetation. Among the environmental parameters taken, altitude was the strongest explanatory variable. While incidence of fire is correlated with socioeco- nomic parameters and relief Soil pH, and texture have shown stronger correlation with 1 altitude. While percent total nitrogen was showing more significant (p<0.01) correla- tion with microsite factors. Local people burn the Ericaceous vegetation mainly for grazing. Therefore, strategies that may reduce the rate of fire should take into account the pasture and the semi - pastoral local communities. Creat income-generating alter- natives for increasing population at Rira village. Barley used to be cultivated around Rira village in limited places. But now, indigenous settlers who were mainly depend- ing on animal rearing are shifting to mixed farming practices with increasing popu- lation. This could jeopardize the water shade of the area, in addition to the loss of biodiversity. Increasing awareness of the people on wise use of forest through school environmental clubs is also a possible option to approach the local people.

The Cenozoic evolution of the San Joaquin Valley, California

USGS Publications Warehouse

Bartow, J. Alan

1991-01-01

The San Joaquin Valley, which is the southern part of the 700-km-long Great Valley of California, is an asymmetric structural trough that is filled with a prism of upper Mesozoic and Cenozoic sediments up to 9 km thick; these sediments rest on crystalline basement rocks of the southwestward-tilted Sierran block. The San Joaquin sedimentary basin is separated from the Sacramento basin to the north by the buried Stockton arch and associated Stockton fault. The buried Bakersfield arch near the south end of the valley separates the small Maricopa-Tejon subbasin at the south end of the San Joaquin basin from the remainder of the basin. Cenozoic strata in the San Joaquin basin thicken southeastward from about 800 m in the north to over 9,000 m in the south. The San Joaquin Valley can be subdivided into five regions on the basis of differing structural style. They are the northern Sierran block, the southern Sierran block, the northern Diablo homocline, the westside fold belt, and the combined Maricopa-Tejon subbasin and southmargin deformed belt. Considerable facies variation existed within the sedimentary basin, particularly in the Neogene when a thick section of marine sediment accumulated in the southern part of the basin, while a relatively thin and entirely nonmarine section was deposited in the northern part. The northern Sierran block, the stable east limb of the valley syncline between the Stockton fault and the San Joaquin River, is the least deformed region of the valley. Deformation consists mostly of a southwest tilt and only minor late Cenozoic normal faulting. The southern Sierran block, the stable east limb of the valley syncline between the San Joaquin River and the Bakersfield arch, is similar in style to the northern part of the block, but it has a higher degree of deformation. Miocene or older normal faults trend mostly north to northwest and have a net down-to-the-west displacement with individual offsets of as much as 600 m. The northern Diablo homocline, the western limb of the valley syncline between the Stockton arch and Panoche Creek, consists of a locally faulted homocline with northeast dips. Deformation is mostly late Cenozoic, is complex in its history, and has included up-to-the-southwest reverse faulting. The west-side fold belt, the southwestern part of the valley syncline between Panoche Creek and Elk Hills and including the southern Diablo and Temblor Ranges, is characterized by a series of folds and faults trending slightly oblique to the San Andreas fault. Paleogene folding took place in the northern part of the belt; however, most folding took place in Neogene time, during which the intensity of deformation increased southeastward along the belt and southwestward toward the San Andreas fault. The Maricopa-Tejon subbasin and the south-margin deformed belt are structurally distinct, but genetically related, regions bounded by the Bakersfield arch on the north, the San Emigdio Mountains on the south, the Tehachapi Mountains on the east, and the southeast end of the fold belt on the west. This combined region, which is the most deformed part of the basin, has undergone significant late Cenozoic shortening through north-directed thrust faulting at the south margin, as well as extreme Neogene basin subsidence north of the thrust belt. The sedimentary history of the San Joaquin basin, recorded in terms of unconformity-bounded depositional sequences, has been controlled principally by tectonism, but it has also been controlled by eustatic sea-level changes and, to a lesser degree, by climate. Plate tectonic events that had an influence on the basin include (1) subduction during the early Tertiary that changed from oblique to normal convergence in the later part of the Eocene, (2) the mid-Oligocene encounter of the Pacific-Farallon spreading ridge with the trench, and the consequent establishment of the San Andreas transform, (3) the northwestward migration of the Mendocino triple junction that in

Transient river response, captured by channel steepness and its concavity

NASA Astrophysics Data System (ADS)

Vanacker, Veerle; von Blanckenburg, Friedhelm; Govers, Gerard; Molina, Armando; Campforts, Benjamin; Kubik, Peter W.

2015-01-01

Mountain rivers draining tropical regions are known to be great conveyor belts carrying efficiently more than half of the global sediment flux to the oceans. Many tropical mountain areas are located in tectonically active belts where the hillslope and stream channel morphology are rapidly evolving in response to changes in base level. Here, we report basin-wide denudation rates for an east-west transect through the tropical Andes. Hillslope and channel morphology vary systematically from east to west, reflecting the transition from high relief, strongly dissected topography in the escarpment zones into relatively low relief topography in the inter-Andean valley. The spatial pattern of differential denudation rates reflects the transient adjustment of the landscape to rapid river incision following tectonic uplift and river diversion. In the inter-Andean valley, upstream of the wave of incision, slopes and river channels display a relatively smooth, concave-up morphology and denudation rates (time scale of 104-105 a) are consistently low (3 to 200 mm/ka). In contrast, slopes and river channels of rejuvenated basins draining the eastern cordillera are steep to very steep; and the studied drainage basins show a wide range of denudation rate values (60 to 400 mm/ka) that increase systematically with increasing basin mean slope gradient, channel steepness, and channel convexity. Drainage basins that are characterised by strong convexities in their river longitudinal profiles systematically have higher denudation rates. As such, this is one of the first studies that provides field-based evidence of a correlation between channel concavity and basin mean denudation rates, consistent with process-based fluvial incision models.

Venus - Ovda Regio

NASA Image and Video Library

1996-08-13

This image covers much of Ovda Regio, which forms the western part of Aphrodite Terra. It covers an area about 2,250 kilometers (1,386 miles) wide by 1,300 kilometers (800 miles) north to south, and ranges in latitude from 8 degrees north to 12 degrees south and in longitude from 62 degrees east to 90 degrees east. Ovda Regio is a highland region that rises over 4 kilometers (2.5 miles) above the surrounding plain. Magellan images show a complex surface, with several generations of structures. A pervasive fabric of irregular broad domes and ridges and associated curvilinear valleys was flooded by lava, then fractured. The circular feature surrounded by dark lava flows in the western part of the image is a caldera, or large volcanic collapse pit. Late-stage extension created long graben, or fault-bounded valleys, is best seen near the center of the image. The northern boundary of Ovda Regio is a steep, curvilinear mountain belt made up of long, narrow, rounded ridges. These ridges are similar in appearance to folded mountain belts on Earth. Several impact craters, such as the circular features on the western margin of the image, are scattered across the area. The bright area in the southeast part of the image indicates the presence of a radar-reflective mineral such as pyrite. Most of the highland areas on Venus display a similar bright signal. Each pixel of this image covers an area on the surface 675 meters (2,215 feet) across, representing a 9- times reduction in resolution compared to full-scale resolution data. http://photojournal.jpl.nasa.gov/catalog/PIA00146

Middle to Late Jurassic Tectonic Evolution of the Klamath Mountains, California-Oregon

NASA Astrophysics Data System (ADS)

Harper, Gregory D.; Wright, James E.

1984-12-01

The geochronology, stratigraphy, and spatial relationships of Middle and Late Jurassic terranes of the Klamath Mountains strongly suggest that they were formed in a single west-facing magmatic arc built upon older accreted terranes. A Middle Jurassic arc complex is represented by the volcanic rocks of the western Hayfork terrane and consanguineous dioritic to peridotitic plutons. New U/Pb zircon dates indicate that the Middle Jurassic plutonic belt was active from 159 to 174 Ma and is much more extensive than previously thought. This plutonic belt became inactive just as the 157 Ma Josephine ophiolite, which lies west and structurally below the Middle Jurassic arc, was generated. Late Jurassic volcanic and plutonic arc rocks (Rogue Formation and Chetco intrusive complex) lie outboard and structurally beneath the Josephine ophiolite; U/Pb and K/Ar age data indicate that this arc complex is coeval with the Josephine ophiolite. Both the Late Jurassic arc complex and the Josephine ophiolite are overlain by the "Galice Formation," a Late Jurassic flysch sequence, and are intruded by 150 Ma dikes and sills. The following tectonic model is presented that accounts for the age and distribution of these terranes: a Middle Jurassic arc built on older accreted terranes undergoes rifting at 160 Ma, resulting in formation of a remnant arc/back-arc basin/island arc triad. This system collapsed during the Late Jurassic Nevadan Orogeny (150 Ma) and was strongly deformed and stacked into a series of east-dipping thrust sheets. Arc magmatism was active both before and after the Nevadan Orogeny, but virtually ceased at 140 Ma.

Regional Crustal Structures and Their Relationship to the Distribution of Ore Deposits in the Western United States, Based on Magnetic and Gravity Data

USGS Publications Warehouse

Hildenbrand, T.G.; Berger, B.; Jachens, R.C.; Ludington, S.

2000-01-01

Upgraded gravity and magnetic databases and associated filtered-anomaly maps of western United States define regional crustal fractures or faults that may have guided the emplacement of plutonic rocks and large metallic ore deposits. Fractures, igneous intrusions, and hydrothermal circulation tend to be localized along boundaries of crustal blocks, with geophysical expressions that are enhanced here by wavelength filtering. In particular, we explore the utility of regional gravity and magnetic data to aid in understanding the distribution of large Mesozoic and Cenozoic ore deposits, primarily epithermal and porphyry precious and base metal deposits and sediment-hosted gold deposits in the western United States cordillera. On the broadest scale, most ore deposits lie within areas characterized by low magnetic properties. The Mesozoic Mother Lodge gold belt displays characteristic geophysical signatures (regional gravity high, regional low-to-moderate background magnetic field anomaly, and long curvilinear magnetic highs) that might serve as an exploration guide. Geophysical lineaments characterize the Idaho-Montana porphyry belt and the La Caridad-Mineral Park belt (from northern Mexico to western Arizona) and thus indicate a deep-seated control for these mineral belts. Large metal accumulations represented by the giant Bingham porphyry copper and the Butte polymetallic vein and porphyry copper systems lie at intersections of several geophysical lineaments. At a more local scale, geophysical data define deep-rooted faults and magmatic zones that correspond to patterns of epithermal precious metal deposits in western and northern Nevada. Of particular interest is an interpreted dense crustal block with a shape that resembles the elliptical deposit pattern partly formed by the Carlin trend and the Battle Mountain-Eureka mineral belt. We support previous studies, which on a local scale, conclude that structural elements work together to localize mineral deposits within regional zones or belts. This study of mineral deposits of the western United States demonstrates the ability of magnetic and gravity data to elucidate the regional geologic framework or structural setting and to contribute in locating favorable environments for hydrothermal mineralization.

Geometry and kinematics of Majiatan Fold-and-thrust Belt, Western Ordos Basin: implication for Tectonic Evolution of North-South Tectonic Belt

NASA Astrophysics Data System (ADS)

He, D.

2017-12-01

The Helan-Chuandian North-South Tectonic Belt crossed the central Chinese mainland. It is a boundary of geological, geophysical, and geographic system of Chinese continent tectonics from shallow to deep, and a key zone for tectonic and geomorphologic inversion during Mesozoic to Cenozoic. It is superimposed by the southeastward and northeastward propagation of Qinghai-Tibet Plateau in late Cenozoic. It is thus the critical division for West and East China since Mesozoic. The Majiatan fold-and-thrust belt (MFTB), locating at the central part of HCNSTB and the western margin of Ordos Basin, is formed by the tectonic evolution of the Helan-Liupanshan Mountains. Based on the newly-acquired high-resolution seismic profiles, deep boreholes, and surface geology, the paper discusses the geometry, kinematics, and geodynamic evolution of MFTB. With the Upper Carboniferous coal measures and the pre-Sinian ductile zone as the detachments, MFTB is a multi-level detached thrust system. The thrusting was mainly during latest Jurassic to Late Cretaceous, breaking-forward in the foreland, and resulting in a shortening rate of 25-29%. By structural restoration, this area underwent extension in Middle Proterozoic to Paleozoic, which can be divided into three phases of rifting such as Middle to Late Proterozoic, Cambiran to Ordovician, and Caboniferous to early Permian. It underwent compression since Late Triassic, including such periods as Latest Triassic, Late Jurassic to early Cretaceous, Late Cretaceous to early Paleogene, and Pliocene to Quaternary, with the largest shortening around Late Jurassic to early Cretaceous period (i.e. the mid-Yanshanian movement by the local name). However, trans-extension since Eocene around the Ordos Basin got rise to the formation the Yingchuan, Hetao, and Weihe grabens. It is concluded that MFTB is the leading edge of the intra-continental Helan orogenic belt, and formed by multi-phase breaking-forward thrusting during Late Jurassic to Cretaceous. During Cenozoic, MFTB is moderately modified by the northeastward compression due to the NE propagation of Qinghai-Tibet Plateau, and distinctly superimposed by the Yingchuan half-graben. North-South Tectonic Belt underwent a full cycle from extension during Middle Proterozoic to Paleozoic to compression since late Triassic.

Fluid-driven normal faulting earthquake sequences in the Taiwan orogen

NASA Astrophysics Data System (ADS)

Wang, Ling-hua; Rau, Ruey-Juin; Lee, En-Jui

2017-04-01

Seismicity in the Central Range of Taiwan shows normal faulting mechanisms with T-axes directing NE, subparallel to the strike of the mountain belt. We analyze earthquake sequences occurred within 2012-2015 in the Nanshan area of northern Taiwan which indicating swarm behavior and migration characteristics. We select events larger than 2.0 from Central Weather Bureau catalog and use the double-difference relocation program hypoDD with waveform cross-correlation in the Nanshan area. We obtained a final count of 1406 (95%) relocated earthquakes. Moreover, we compute focal mechanisms using USGS program HASH by P-wave first motion and S/P ratio picking and 114 fault plane solutions with M 3.0-5.87 were determined. To test for fluid diffusion, we model seismicity using the equation of Shapiro et al. (1997) by fitting earthquake diffusing rate D during the migration period. According to the relocation result, seismicity in the Taiwan orogenic belt present mostly N25E orientation parallel to the mountain belt with the same direction of the tension axis. In addition, another seismic fracture depicted by seismicity rotated 35 degree counterclockwise to the NW direction. Nearly all focal mechanisms are normal fault type. In the Nanshan area, events show N10W distribution with a focal depth range from 5-12 km and illustrate fault plane dipping about 45-60 degree to SW. Three months before the M 5.87 mainshock which occurred in March, 2013, there were some foreshock events occurred in the shallow part of the fault plane of the mainshock. Half a year following the mainshock, earthquakes migrated to the north and south, respectively with processes matched the diffusion model at a rate of 0.2-0.6 m2/s. This migration pattern and diffusion rate offer an evidence of 'fluid-driven' process in the fault zone. We also find the upward migration of earthquakes in the mainshock source region. These phenomena are likely caused by the opening of the permeable conduit due to the M 5.87 earthquake and the rise of the high pressure fluid.

Miocene shale tectonics in the Moroccan margin (Alboran Sea)

NASA Astrophysics Data System (ADS)

Do Couto, D.; El Abbassi, M.; Ammar, A.; Gorini, C.; Estrada, F.; Letouzey, J.; Smit, J.; Jolivet, L.; Jabour, H.

2011-12-01

The Betic (Southern Spain) and Rif (Morocco) mountains form an arcuate belt that represents the westernmost termination of the peri-mediterranean Alpine mountain chain. The Miocene Alboran Basin and its subbasins is located in the hinterland of the Betic-Rif belt. It is considered to be a back-arc basin that developed during the coeval westward motion of the Alboran domain and the extensional collapse of previously thickened crust of the Betic-Rif belt. The Western Alboran Basin (WAB) is the major sedimentary depocenter with a sediment thickness in excess of 10 km, it is bordered by the Gibraltar arc, the volcanic Djibouti mounts and the Alboran ridge. Part of the WAB is affected by shale tectonics and associated mud volcanism. High-quality 2D seismic profiles acquired on the Moroccan margin of the Alboran Basin during the last decade reveal the multiple history of the basin. This study deals with the analysis of a number of these seismic profiles that are located along and orthogonal to the Moroccan margin. Seismic stratigraphy is calibrated from industrial wells. We focus on the interactions between the gravity-driven tectonic processes and the sedimentation in the basin. Our seismic interpretation confirms that the formation of the WAB began in the Early Miocene (Aquitanian - Burdigalian). The fast subsidence of the basin floor coeval to massive sedimentation induced the undercompaction of early miocene shales during their deposition. Downslope migration of these fine-grained sediments initiated during the deposition of the Langhian siliciclastics. This gravity-driven system was accompanied by continuous basement subsidence and induced disharmonic deformation in Mid Miocene units (i.e. not related to basement deformation). The development of shale-cored anticlines and thrusts in the deep basin is the result of compressive deformation at the front of the gravity-driven system and lasted for ca. 15 Ma. The compressive front has been re-activated by strong siliciclastic deposition, such as in the Serravalian-Tortonian period or more recently during the Quaternary contourites deposition. The Messinian dessication of the Mediterranean Sea and the following catastrophic Pliocene reflooding caused or enhanced re-activation of the deformation.

Late Miocene (Proto-Gulf) Extension and Magmatism on the Sonoran Margin

NASA Astrophysics Data System (ADS)

Gans, P.; MacMillan, I.; Roldan-Quintana, J.

2003-12-01

Constraints on the magnitude and character of late Miocene (Proto-Gulf) deformation on the Sonoran margin of the Gulf of California extensional province are key to understanding how and when Baja California was captured by the Pacific plate and how strain was partitioned during the early stages of this transtensional rift system. Our new geologic mapping in southwestern Sonora and 40Ar/39Ar dating of pre-, syn-, and post-tectonic volcanic units indicate that late Miocene deformation and volcanic activity were largely restricted to a NW-trending, 100-120 km wide belt adjacent to the coast. Inboard of this belt, NW-SE extension is mainly older (>15 Ma) and occurred in an intra-arc or back-arc setting. Proto-Gulf deformation within the coastal belt was profoundly transtensional, with NW-striking, dextral strike slip faults operating in concert with N-S and NNE-striking normal and oblique slip faults to produce an inferred NW or NNW tectonic transport direction. The total amount of late Miocene NW directed dextral shear within the coastal belt is still poorly constrained, but may exceed 100 km. The locus of deformation and volcanic activity migrated westward or northwestward within the Sonoran coastal belt. in the eastern portion (Sierra Libre and Sierra El Bacatete) major volcanic activity commenced at ˜13.0 Ma and peaked at 12.0 Ma, and major faulting and tilting is bracketed between 12.0 and 10.6 Ma. Further west in the Sierra El Aguaje/San Carlos region, major volcanic activity commenced at 11.5 Ma and peaked at 10.5 Ma, and most faulting and tilting is bracketed between 10.7 and 9.3 Ma. On the coastal mountains northwest of San Carlos, rift related faulting and tilting continued after 8.5 Ma. Voluminous late Miocene (13-8 Ma) volcanic rocks within the Sonoran coastal belt were erupted from numerous centers (e.g. Sierra Libre, Guaymas, Sierra El Aguaje). These thick volcanic sections are compositionally diverse (basalt to rhyolite, with abundant dacite and andesite), and are intimately associated in space and time with tectonic activity. Overall, the Sonoran coastal belt provides a spectacular example of distributed transtension and associated magmatism that ultimately led to rupturing of the continental lithosphere.

Thick-skinned tectonics in a Late Cretaceous-Neogene intracontinental belt (High Atlas Mountains, Morocco): The flat-ramp fault control on basement shortening and cover folding

NASA Astrophysics Data System (ADS)

Fekkak, A.; Ouanaimi, H.; Michard, A.; Soulaimani, A.; Ettachfini, E. M.; Berrada, I.; El Arabi, H.; Lagnaoui, A.; Saddiqi, O.

2018-04-01

Most of the structural studies of the intracontinental High Atlas belt of Morocco have dealt with the central part of the belt, whose basement does not crop out. Here we study the Alpine deformation of the North Subatlas Zone, which is the part of the Western High Atlas (WHA) Paleozoic Massif that involves both Paleozoic basement units and remnants of their Mesozoic-Cenozoic cover formations. Our aim is to better constrain the geometry and kinematics of the basement faults during the Alpine shortening. Based on detail mapping, satellite imagery and field observations, we describe an array of sub-equatorial, transverse and oblique faults between the WHA Axial Zone and the Haouz Neogene basin. They define a mosaic of basement blocks pushed upon one another and upon the Haouz basement along the North Atlas Fault (NAF). The Axial Zone makes up the hanging-wall of the Adassil-Medinet Fault (AMF) south of this mosaic. The faults generally presents flat-ramp-flat geometry linked to the activation of multiple décollement levels, either within the basement where its foliation is subhorizontal or within favourable cover formations (Jurassic evaporites, Lower Cretaceous silty red beds, Upper Cretaceous evaporitic marls, Neogene basal argillites). The occurrence of the North Atlas detachment (NAD) allowed folded pop-up units to develop in front of the propagating NAF. Shortening began as early as the Campanian-Maastrichtian along the AMF. The direction of the maximum horizontal stress rotated from NNE-SSW to NNW-SSE from the Maastrichtian-Paleocene to the Neogene. The amount of shortening reaches 20% in the Azegour transect. This compares with the shortening amount published for the central-eastern High Atlas, suggesting that similar structures characterize the Paleozoic basement all along the belt. The WHA thick-skinned tectonics evokes that of the frontal Sevier belt and of the external Western Alps, although with a much minor pre-inversion burial.

Deformation styles and exhumation patterns in the Northern Iranian Plateau: New results from integrated balanced cross sections and low-temperature thermochronology (AHe and ZHe)

NASA Astrophysics Data System (ADS)

Balling, Philipp; Ballato, Paolo; Dunkl, István; Zeillinger, Gerold; Heidarzadeh, Ghasem; Ghasemi, Mohammad; Strecker, Manfred R.

2014-05-01

The Iranian Plateau is situated in the collision zone between the Arabian and Eurasian plates and forms a NW-SE elongated, 40- to 50-km-thick crustal block, delimited to the north by the Urmieh Dokhtar Volcanic Zone and to south by the High Zagros Mountains. The plateau is characterized by a series of basins and mountain ranges bounded by reverse and transpressive faults. These mountain ranges reflect a history of strong collisional deformation, with intensely faulted and folded Pre-Cambrian (basement) to Miocene (terrestrial sediments of the Upper Red Formation) rocks. Based on the structural evolution, high mean elevation of 2 km, and a crustal thickness of up to 56 km, the realm of the present-day plateau must have absorbed a significant fraction of past plate convergence between Eurasia and Arabia. However, according to seismic and GPS data active deformation is rather limited. In addition, the exact timing and style of deformation, the extent of crustal shortening and thickening on the northern Iranian Plateau during continental collision remain unclear. To address these issues we collected structural data and modeled deformation scenarios cross four mountain ranges that constitute the northern margin of the Iranian Plateau (NW Iran). The Tarom, Mah Neshan and Sultanije mountain ranges are NW-SE oriented, while the northernmost (Bozgosh) is E-W aligned. Due to the lack of subsurface data, several forward and backward models were generated with MOVE (Midland Valley, structural modelling software). The model with the simplest and most robust geological explanation of the field data was chosen. In addition, we combined our structural work with an apatite (U-Th)/He study (AHe) along two transects (Bozgosh, Mah Neshan) and Zircon (U-Th)/He data (ZHe) on higher exhumed locations. In the northern sector of the plateau late Cretaceous (or Paleocene?) rocks had been deposited unconformably onto older, deformed rocks. This suggests that the Arabia-Eurasia collision was predated by at least one contractional episode, which was most likely associated with the deposition of red continental conglomerates (Fajan Fm.). Consequently, some of the major faults affecting Tertiary units in the region may be inherited structures, reactivated during collisional deformation. Our structural results indicate that the different mountain ranges constituting the northern plateau are characterized by thick-skinned deformation (tectonics) with major deep-seated faults exposing basement rocks. Locally, thin-skinned tectonics occurred, with multiple detachment horizons within evaporites of the Lower and Upper Red formations (Oligo-Miocene), and shales of the Shemshak (Jurassic), and the Barut (Cambrian) formations. The first obtained AHe cooling ages for this area suggest that the more internal sectors of the Iranian Plateau (SW of the Mah Neshan profile) record an early cooling phase at 25-20 Ma. This was followed by outward propagation of deformation fronts to the north and northeast from approximately 12 to 8 Ma. This resulted in the development of a contractional basin and range morphology of the Iranian Plateau.

CRUSTAL TECTONICS AND SEISMICITY OF THE MIDDLE EAST

NASA Astrophysics Data System (ADS)

Ghalib, H. A.; Gritto, R.; Sibol, M. S.; Herrmann, R. B.; Aleqabi, G. I.; Caron, P. F.; Wagner, R. A.; Ali, B. S.; Ali, A. A.

2009-12-01

The Arabian plate describes a geological entity and a dynamic system that has been in continuous interaction with the African plate to the west and south and the Eurasian plate to the north and east. The western and southern boundaries are distinguished by see floor spreading along the Gulf of Aden and Red Sea and transform faulting along the Dead Sea, whereas the northern and eastern boundaries are portrayed by compressional suture zones under thrusting the Turkish and Iranian plateaus. Despite this favorable juxtaposition of continental land masses and the plethora of national seismic networks in every country of the Middle East, the majority of published research on the Arabian plate and surrounding tectonic blocks still depends primarily on global seismographic stations and occasional local networks. Since 2005, we deployed a number of seismic stations, and more recently a five elements array, in close proximity to the northeastern boundary of the Arabian plate. The primary objective of the effort is to better understand the regional seismicity and seismotectonics of the Arabian plate and surrounding regions. To date over a terabyte of high quality 100 sps continuous three-component broadband data have been collected and being analyzed to derive models representative of the greater Middle East tectonic setting. This goal is, in part, achieved by estimating local and regional seismic velocity models using receiver function and surface wave dispersion analyses, and by using these models to obtain accurate hypocenter locations and event focal mechanisms. The resulting events distribution reveals a distinct picture of the interaction between the seismicity and tectonics of the region. The highest seismicity rate seems to be confined to the active northern section of the Zagros thrust zone, while it decreases towards the southern end, before the intensity increases again in the Bandar Abbas region. Spatial distribution of the events and stations provide thorough coverage of all the tectonic provinces in the region. Phases including Pn, Pg, Sn, Lg, as well as LR are clearly observed on recorded seismograms. Blockage or attenuation of some of the crustal body waves is observed along propagation paths crossing the Zagros-Bitlis zone. These findings are also in support of earlier tectonic models that suggest the existence of multiple parallel listric faults splitting off the main Zagros fault zone in east-west direction. Surface- and body wave results in support of these findings will be presented. Our initial structural models of the crust beneath north-eastern Iraq depict a thickness of 40-50 km in the foothills, which increases to 45-55 km beneath the Zagros-Bitlis zone.

Preliminary geologic map of the Santa Barbara coastal plain area, Santa Barbara County, California

USGS Publications Warehouse

Minor, Scott A.; Kellogg, Karl S.; Stanley, Richard G.; Stone, Paul; Powell, Charles L.; Gurrola, Larry D.; Selting, Amy J.; Brandt, Theodore R.

2002-01-01

This report presents a new geologic digital map of the Santa Barbara coastal plain area at a compilation scale of 1:24,000 (one inch on the map = 2,000 feet on the ground) and with a horizontal positional accuracy of at least 20 m. This preliminary map depicts the distribution of bedrock units and surficial deposits and associated deformation underlying and adjacent to the coastal plain within the contiguous Santa Barbara and Goleta 7.5' quadrangles. A planned second version will extend the mapping westward into the adjoining Dos Pueblos Canyon quadrangle and eastward into the Carpinteria quadrangle. The mapping presented here results from the collaborative efforts of geologists with the U.S. Geological Survey Southern California Areal Mapping Project (SCAMP) (Minor, Kellogg, Stanley, Stone, and Powell) and the tectonic geomorphology research group at the University of California at Santa Barbara (Gurrola and Selting). C.L. Powell, II, performed all new fossil identifications and interpretations reported herein. T.R. Brandt designed and edited the GIS database,performed GIS database integration and created the digital cartography for the map layout. The Santa Barbara coastal plain is located in the western Transverse Ranges physiographic province along a west-trending segment of the southern California coastline about 100 km (62 mi) northwest of Los Angeles. The coastal plain region, which extends from the Santa Ynez Mountains on the north to the Santa Barbara Channel on the south, is underlain by numerous active and potentially active folds and partly buried thrust faults of the Santa Barbara fold and fault belt. Strong earthquakes that occurred in the region in 1925 (6.8 magnitude) and 1978 (5.1 magnitude) are evidence that such structures pose a significant earthquake hazard to the approximately 200,000 people living within the major coastal population centers of Santa Barbara and Goleta. Also, young landslide deposits along the steep lower flank of the Santa Ynez Mountains indicate the potential for continued slope failures and mass movements that may threaten urbanized parts of the coastal plain. Deformed sedimentary rocks in the subsurface of the coastal plain and the adjacent Santa Barbara Channel contain deposits of oil and gas, some of which are currently being extracted. Shallow, localized sedimentary aquifers underlying the coastal plain provide limited amounts of water for the urban areas, but the quality of some of this groundwater is compromised by coastal salt-water contamination. The present map compilation provides a set of uniform geologic digital coverages that can be used for analysis and prediction of these and other geologic hazards and resources in the coastal plain region. In the map area the oldest stratigraphic units consist of resistant Eocene to Oligocene marine and terrestrial sedimentary rocks that form a mostly southward-dipping and laterally continuous sequence along the south flank of the Santa Ynez Mountains. Less resistant, but more variably deformed, Miocene, Pliocene, and Pleistocene marine sedimentary rocks and deposits are exposed in the lower Santa Ynez foothills and in the coastal hills and sea cliffs farther south. Pleistocene and Holocene surficial alluvial, colluvial, estuarine, and marine-terrace deposits directly underlie much of the low-lying coastal plain area, and similar-aged alluvial and landslide deposits locally mantle the lower flanks of the Santa Ynez Mountains. Structurally, the Santa Barbara coastal plain area is dominated by the Santa Barbara fold and fault belt, an east-west-trending zone of Quaternary, partly active folds and blind and exposed reverse and thrust faults. The dominant trend of individual structures within the belt is west-northwest -- slightly oblique to the overall trend of the fold and fault belt. A conspicuous exception, however, is the More Ranch fault system, which strikes east-northeast across the fold and f

Quantifying Arabia-Eurasia convergence accommodated in the Greater Caucasus by paleomagnetic reconstruction

NASA Astrophysics Data System (ADS)

van der Boon, A.; van Hinsbergen, D. J. J.; Rezaeian, M.; Gürer, D.; Honarmand, M.; Pastor-Galán, D.; Krijgsman, W.; Langereis, C. G.

2018-01-01

Since the late Eocene, convergence and subsequent collision between Arabia and Eurasia was accommodated both in the overriding Eurasian plate forming the Greater Caucasus orogen and the Iranian plateau, and by subduction and accretion of the Neotethys and Arabian margin forming the East Anatolian plateau and the Zagros. To quantify how much Arabia-Eurasia convergence was accommodated in the Greater Caucasus region, we here provide new paleomagnetic results from 97 volcanic sites (∼500 samples) in the Talysh Mountains of NW Iran, that show ∼15° net clockwise rotation relative to Eurasia since the Eocene. We apply a first-order kinematic restoration of the northward convex orocline that formed to the south of the Greater Caucasus, integrating our new data with previously published constraints on rotations of the Eastern Pontides and Lesser Caucasus. This suggests that north of the Talysh ∼120 km of convergence must have been accommodated. North of the Eastern Pontides and Lesser Caucasus this is significantly more: 200-280 km. Our reconstruction independently confirms previous Caucasus convergence estimates. Moreover, we show for the first time a sharp contrast of convergence between the Lesser Caucasus and the Talysh. This implies that the ancient Paleozoic-Mesozoic transform plate boundary, preserved between the Iranian and East-Anatolian plateaus, was likely reactivated as a right-lateral transform fault since late Eocene time.

Analysis of spatial autocorrelation patterns of heavy and super-heavy rainfall in Iran

NASA Astrophysics Data System (ADS)

Rousta, Iman; Doostkamian, Mehdi; Haghighi, Esmaeil; Ghafarian Malamiri, Hamid Reza; Yarahmadi, Parvane

2017-09-01

Rainfall is a highly variable climatic element, and rainfall-related changes occur in spatial and temporal dimensions within a regional climate. The purpose of this study is to investigate the spatial autocorrelation changes of Iran's heavy and super-heavy rainfall over the past 40 years. For this purpose, the daily rainfall data of 664 meteorological stations between 1971 and 2011 are used. To analyze the changes in rainfall within a decade, geostatistical techniques like spatial autocorrelation analysis of hot spots, based on the Getis-Ord G i statistic, are employed. Furthermore, programming features in MATLAB, Surfer, and GIS are used. The results indicate that the Caspian coast, the northwest and west of the western foothills of the Zagros Mountains of Iran, the inner regions of Iran, and southern parts of Southeast and Northeast Iran, have the highest likelihood of heavy and super-heavy rainfall. The spatial pattern of heavy rainfall shows that, despite its oscillation in different periods, the maximum positive spatial autocorrelation pattern of heavy rainfall includes areas of the west, northwest and west coast of the Caspian Sea. On the other hand, a negative spatial autocorrelation pattern of heavy rainfall is observed in central Iran and parts of the east, particularly in Zabul. Finally, it is found that patterns of super-heavy rainfall are similar to those of heavy rainfall.

The Satah Mountain and Baldface Mountain Volcanic Fields, Chilcotin Highland, West-Central British Columbia

NASA Astrophysics Data System (ADS)

Kuehn, C.; Guest, B.

2012-12-01

A large number of volcanic features, including stratovolcanoes, cinder cones, domes, flows and erosional remnants of these exist in the Satah Mountain Volcanic Field (SMVF) and Baldface Mountain Volcanic Fields (BMVF), located near the Itcha Ranges in the Chilcotin Highland of west-central British Columbia. Petrographical, geochemical and geochronological studies are hoped to clarify the volcano-tectonic association of these fields and their relation with the nearby Anahim Volcanic Belt (AVB) and possibly provide a confirmation for the hot-spot that has been proposed as the source of magmatism in the area from the mid-Miocene to the Holocene. During field work, 20 centres in the SMVF aligned on a NNW-SSE trending topographic high and seven centres in the BMVF were studied with a focus on geochemistry and ages of the lavas erupted. With the exception of Satah Mountain, the most prominent and best-preserved edifice, individual centres are generally small in height (200-300 m) and volume. There is clear evidence for glacial modification of edifices, which likely removed most of the once-existing pyroclastic material, and water-magma interaction could be observed at one centre as well. Extensive coverage by glacial till limits outcrops to cliffs on the edifices' flanks or to local "windows" in the Quaternary deposits. This makes stratigraphic relationships, both within the fields and the surrounding volcanic rocks of the Anahim Volcanic Belt (AVB) and Chilcotin Flood Basalts (CFB), unclear. Preliminary XRF results indicate a high variability of the lavas, even between centres close to each other. Erupted lavas range from undersaturated basanites (44 wt% SiO2), trachybasalts and trachytes to high-alkali phonolites (14 wt% Na2O+K2O). In general, larger structures in the SMVF appear to have erupted more evolved rocks whereas smaller centres, often just remnants of plugs and necks, and centres in the BMVF erupted more primitive rocks. In addition, whole-rock ages were determined using the Ar-Ar method for eight SMVF centres and four in the BMVF, with clusters around 1.79 Ma for the former and 2.36 Ma for the latter. These ages coincide with existing K-Ar ages for the nearby Itcha Ranges and fit well with the hot-spot hypothesis for the AVB. The prevalence of evolved rocks in the SMVF and BMVF might also indicate a relationship to the high-alkaline rocks of the AVB. Further studies will focus (1) on the geochemistry and ages of additional centres, including the yet-unstudied southern part of the Rainbow Range shield volcano in the AVB, and (2) the isotopic composition of the lavas to identify possible source regions of the erupted magmas.

Bedrock geologic map of the Yucca Mountain area, Nye County, Nevada

USGS Publications Warehouse

Day, Warren C.; Dickerson, Robert P.; Potter, Christopher J.; Sweetkind, Donald S.; San Juan, Carma A.; Drake, Ronald M.; Fridrich, Christopher J.

1998-01-01

Yucca Mountain, Nye County, Nevada, has been identified as a potential site for underground storage of high-level radioactive nuclear waste. Detailed bedrock geologic maps form an integral part of the site characterization program by providing the fundamental framework for research into the geologic hazards and hydrologic behavior of the mountain. This bedrock geologic map provides the geologic framework and structural setting for the area in and adjacent to the site of the potential repository. The study area comprises the northern and central parts of Yucca Mountain, located on the southern flank of the Timber Mountain-Oasis Valley caldera complex, which was the source for many of the volcanic units in the area. The Timber Mountain-Oasis Valley caldera complex is part of the Miocene southwestern Nevada volcanic field, which is within the Walker Lane belt. This tectonic belt is a northwest-striking megastructure lying between the more active Inyo-Mono and Basin-and-Range subsections of the southwestern Great Basin.Excluding Quaternary surficial deposits, the map area is underlain by Miocene volcanic rocks, principally ash-flow tuffs with lesser amounts of lava flows. These volcanic units include the Crater Flat Group, the Calico Hills Formation, the Paintbrush Group, and the Timber Mountain Group, as well as minor basaltic dikes. The tuffs and lava flows are predominantly rhyolite with lesser amounts of latite and range in age from 13.4 to 11.6 Ma. The 10-Ma basaltic dikes intruded along a few fault traces in the north-central part of the study area. Fault types in the area can be classified as block bounding, relay structures, strike slip, and intrablock. The block-bounding faults separate the 1- to 4-km-wide, east-dipping structural blocks and exhibit hundreds of meters of displacement. The relay structures are northwest-striking normal fault zones that kinematically link the block-bounding faults. The strike-slip faults are steep, northwest-striking dextral faults located in the northern part of Yucca Mountain. The intrablock faults are modest faults of limited offset (tens of meters) and trace length (less than 7 km) that accommodated intrablock deformation.The concept of structural domains provides a useful tool in delineating and describing variations in structural style. Domains are defined across the study area on the basis of the relative amount of internal faulting, style of deformation, and stratal dips. In general, there is a systematic north to south increase in extensional deformation as recorded in the amount of offset along the block-bounding faults as well as an increase in the intrablock faulting.The rocks in the map area had a protracted history of Tertiary extension. Rocks of the Paintbrush Group cover much of the area and obscure evidence for older tectonism. An earlier history of Tertiary extension can be inferred, however, because the Timber Mountain-Oasis Valley caldera complex lies within and cuts an older north-trending rift (the Kawich-Greenwater rift}. Evidence for deformation during eruption of the Paintbrush Group is locally present as growth structures. Post-Paintbrush Group, pre-Timber Mountain Group extension occurred along the block-bounding faults. The basal contact of the 11.6-Ma Rainier Mesa Tuff of the Timber Mountain Group provides a key time horizon throughout the area. Other workers have shown that west of the study area in northern Crater Flat the basal angular unconformity is as much as 20° between the Rainier Mesa and underlying Paintbrush Group rocks. In the westernmost part of the study area the unconformity is smaller (less than 10°), whereas in the central and eastern parts of the map area the contact is essentially conformable. In the central part of the map the Rainier Mesa Tuff laps over fault splays within the Solitario Canyon fault zone. However, displacement did occur on the block-bounding faults after deposition of the Rainier Mesa Tuff inasmuch as it is locally caught up in the hanging-wall deformation of the block-bounding faults. Therefore, the regional Tertiary to Recent extension was protracted, occurring prior to and after the eruption of the tuffs exposed at Yucca Mountain.

Sun River (24CA74): A Stratified Pelican Lake and Oxbow Occupation Site near Great Falls, Montana.

DTIC Science & Technology

1983-08-31

silicified sediment probably were derived from outcrops of the Madison and Kootenai Formations, respectively. BW Bade t -[ / ’,’V ~ St rr, ,’, T...8217 .404 10 A- ac. UW cc "a 0 141 v Sso 7-19 Figure 7-9. Level VI uniface tools (full scale): a: Tool #62, 45N 268W, basalt cortical flake b: Tool #49, 43N...frcxm the Madison Group of Mississippian age, which occurs widely in central Montana, especially in the Little Belt Mountains. All of these materials also

Gravity anomalies, compensation mechanisms, and the geodynamics of western Ishtar Terra, Venus

NASA Technical Reports Server (NTRS)

Grimm, Robert E.; Phillips, Roger J.

1991-01-01

Pioneer Venus line-of-sight orbital accelerations were utilized to calculate the geoid and vertical gravity anomalies for western Ishtar Terra on various planes of altitude z sub 0. The apparent depth of isostatic compensation at z sub 0 = 1400 km is 180 + or - 20 km based on the usual method of minimum variance in the isostatic anomaly. An attempt is made here to explain this observation, as well as the regional elevation, peripheral mountain belts, and inferred age of western Ishtar Terra, in terms of one or three broad geodynamic models.

Stromatolite- and coated-grain-bearing carbonate rocks of the western Brooks Range: A section in Geologic studies in Alaska by the U.S. Geological Survey during 1987

USGS Publications Warehouse

Dumoulin, Julie A.

1988-01-01

Carbonate rocks characterized by locally abundant stromatolites and coated grains have been found at several localities in the Baird Mountains and Ambler River quadrangles (fig. 1). These rocks are part of a belt of metasedimentary and metaigneous rocks that constitutes the southwestern flank of the Brooks Range; all are included in the parautochthon (Schwatka sequence) of Mayfield and others (1983). The rocks have been deformed and metamorphosed to blueschist and greenschist facies, but primary textures and sedimentary structures are locally well preserved.